Irradiation behaviour of mixed uranium-plutonium carbides, nitrides and carbonitrides; Comportement a l'irradiation de carbures, nitrures et carbonitrures mixtes d'uranium et de plutonium

Energy Technology Data Exchange (ETDEWEB)

Mikailoff, H; Mustelier, J P; Bloch, J; Leclere, J; Hayet, L [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1967-07-01

In the framework of the research program of fast reactor fuels two irradiation experiments have been carried out on mixed uranium-plutonium carbides, nitrides and carbo-nitrides. In the first experiment carried out with thermal neutrons, the fuel consisted of sintered pellets sheathed in a stainless steel can with a small gap filled with helium. There were three mixed mono-carbide samples and the maximum linear power was 715 W/cm. After a burn-up slightly lower than 20000 MW day/tonne, a swelling of the fuel which had ruptured the cans was observed. In the second experiment carried out in the BR2 reactor with epithermal neutrons, the samples consisted of sintered pellets sodium bonded in a stainless steel tube. There were three samples containing different fuels and the linear power varies between 1130 and 1820 W/cm. Post-irradiation examination after a maximal burn-up of 1550 MW day/tonne showed that the behaviour of the three fuel elements was satisfactory. (authors) [French] Dans le cadre du programme d'etude des conibustiles pour reacteurs rapides, on a realise deux experiences d'irradiation de carbures, nitrures et carbonitrures mixtes d'uranium et de plutonium. Dans la premiere experience, faite en neutrons thermiques, le combustible etait constitue de,pastilles frittees gainees dans un tube d'acier inoxydable avec un faible jeu rempli d'helium. Il y avait trois echantillons de monocarbures mixtes, et la puissance lineaire maximale etait de 715 W/cm. Apres un taux de combustion legerement inferieur a 20 000 MWj/t, on a observe un gonflement des combustible qui a provoque, la rupture des gaines. Pans la seconde experience, realisee dans le reacteur BR2 en neutrons epithermiques, les echantillons etaient constitues de pastilles frittees gainees dans un tube d'acier avec un joint sodium. Il y avait trois echantillons contenant des combustibles differents, et la puissance lineaire variait de 1130 a 1820 W/cm. Les examens apres irradiation a un taux maximal de

Thermal and radiation induced polymerisation of carbon sub-oxide; Polymerisation thermique et sous rayonnement du sous-oxyde de carbone

Energy Technology Data Exchange (ETDEWEB)

Schmidt, Michel

1964-03-15

This research thesis addresses the study of the polymerisation of carbon sub-oxide (C{sub 3}O{sub 2}) in gaseous phase. As this work is related to other researches dealing with the reactions of the graphite-CO{sub 2} system which occur in graphite-moderated nuclear reactors, a first intention was to study the behaviour of C{sub 3}O{sub 2} when submitted to radiations. Preliminary tests showed that the most remarkable result of this action was the formation of a polymer. It was also noticed that the polymerisation of this gas was spontaneous however slower at room temperature. The research thus focused on this polymerisation, and on the formula of the obtained polymer. After some generalities, the author reports the preparation, purification and storage and conservation of the carbon sub-oxide. The next parts report the kinetic study of thermal polymerisation, the study of polymerisation under γ rays, the study of the obtained polymer by using visible, UV and infrared spectroscopy, electronic paramagnetic resonance, and semi-conductivity measurements [French] Le but de ce travail est l'etude de la polymerisation du sous-oxyde de carbone, C{sub 3}O{sub 2}, en phase gazeuse. Ce travail est en relation avec d'autres recherches concernant les reactions du systeme graphite-CO{sub 2} qui se produisent dans les reacteurs nucleaires de la filiere moderee au graphite. Notre premiere intention etait donc d'etudier le comportement de C{sub 3}O{sub 2} sous l'action des rayonnements. Or des essais preliminaires nous ont rapidement montre que le resultat le plus marquant de cette action etait l'obtention d'un polymere. On a egalement remarque que ce gaz polymerisait spontanement - quoique moins rapidement - a la temperature ambiante. Notre etude s'est donc circonscrite a cette polymerisation, avec ou sans rayonnements, ainsi qu'a son aboutissement: le polymere, dont nous avons tente d'eclaircir la formule. Au terme de cette etude, bien que certains points ne soient pas encore

Some problems on the aqueous corrosion of structural materials in nuclear engineering; Problemes de corrosion aqueuse de materiaux de structure dans les constructions nucleaires

Energy Technology Data Exchange (ETDEWEB)

Coriou, H; Grall, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

The purpose of this report is to give a comprehensive view of some aqueous corrosion studies which have been carried out with various materials for utilization either in nuclear reactors or in irradiated fuel treatment plants. The various subjects are listed below. Austenitic Fe-Ni-Cr alloys: the behaviour of austenitic Fe-Ni-Cr alloys in nitric medium and in the presence of hexavalent chromium; the stress corrosion of austenitic alloys in alkaline media at high temperatures; the stress corrosion of austenitic Fe-Ni-Cr alloys in 650 C steam. Ferritic steels: corrosion of low alloy steels in water at 25 and 360 C; zirconium alloys; the behaviour of ultrapure zirconium in water and steam at high temperature. (authors) [French] On presente un ensemble d'etudes de corrosion en milieu aqueux effectuees sur des materiaux utilises, soit dans la construction des reacteurs soit pour la realisation des usines de traitement des combustibles irradies. Les differents sujets etudies sont les suivants. Les alliages austenitiques Fer-Nickel-Chrome: comportement d'alliages austenitiques fer-nickel-chrome en milieu nitrique en presence de chrome hexavalent; Corrosion sous contrainte d'alliages austenitiques dans les milieux alcalins a haute temperature; Corrosion sous contrainte dans la vapeur a 650 C d'alliages austenitiques fer-nickel-chrome. Les aciers ferritiques; Corrosion d'aciers faiblement allies dans l'eau a 25 et 360 C; le zirconium et ses alliages; Comportement du zirconium tres pur dans l'eau et la vapeur a haute temperature. (auteurs)

Tambaqui (Colossoma macropomum sous vide: characterization and quality parameters

Directory of Open Access Journals (Sweden)

Fabiane de Cássia Pontes Ramos

2016-02-01

Full Text Available The objective of this study was to evaluate the microbiological, physical and physico-chemical quality parameters of sous vide preparation of pen-reared tambaqui (Colossoma macropomum. To prepare the tambaqui sous vide, 200 g of fillet, 50 g of basil sauce (1:4 fish fillet:sauce ratio and 10 mL of 5% sodium lactate were used. The product was then vacuum-packaged, pasteurized at 65 ºC for 12.5 min and refrigerated. The presence of Salmonella spp., sulfite-reducing Clostridium and Listeria monocytogenes was not detected in the samples analyzed. The coliform count at 45 ºC and coagulase-positive staphylococci were below the limit (103 permitted by the law in vigor. Water retention capacity and chloride content analyses revealed that the tambaqui fillet differed significantly (P<0.05 from the sous vide because of the addition of basil sauce. The total volatile basic nitrogen (TVB-N and thiobarbituric acid reactive substances (TBARS content of the fillet and sous vide were below the limits established by the law, indicating good quality. The lightness (L* and yellow color (b* of the fillet and the sous vide did not differ significantly (P>0.05, but the red color (a* decreased in the sous vide, which is related to the addition of basil sauce. The chroma (C* and hue angle (ho differed significantly (P<0.05, and the fillet samples were lighter in color, whereas the sous vide was characterized by yellow color. The n-6/n-3 ratios found for the fillet and the sous vide are within the recommended values, which is important for human metabolism. The fillet and sous vide also had high calcium, zinc, magnesium and potassium concentrations. It is concluded that tambaqui sous vide is a good source of nutrients, rich in fatty acids and minerals essential for human health.

Study of points defects produced by irradiation of monocrystalline nickel and polycrystalline gadolinium; Etude des defauts ponctuels crees par irradiation dans: - le nickel monocristallin - le gadolinium polycristallin

Energy Technology Data Exchange (ETDEWEB)

Cope, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-07-01

The work described in this thesis falls into two parts: the first comprises a study of magnetocrystalline nickel by resistivity measurements; the second is a description of resistivity and magnetic after effect measurements on an h.c.p. ferromagnetic crystal other than cobalt, namely gadolinium. For the first part we have demonstrated the existence of a small but definite orientation dependence in the creation of point defects by electron irradiation (20 deg. K) of a nickel single crystal. In particular, the effect is manifested in the form of the stage I{sub C}, II and III in the resistivity recovery. In the second part an important result has emerged: namely that there is no magnetic after effect phenomenon in a neutron irradiated (27 deg. K) ferromagnetic metal. Several considerations are discussed by way of a preliminary interpretation of this important difference between gadolinium and cobalt. (author) [French] Le travail qui a fait l'objet de ce memoire comporte deux parties distinctes: une premiere constituee de l'etude du nickel sous la forme de monocristaux, a l'aide de mesures de resistivite; la seconde partie est composee d'experiences de resistivite et de trainage magnetique sur un cristal h.c.p. ferromagnetique autre que le cobalt, le gadolinium. Dans la premiere partie, nous avons mis en evidence un effet sensible de la direction de l'irradiation electronique (a 20 deg. K) sur la creation des defauts ponctuels dans le nickel monocristallin, en particulier au niveau des stades I{sub C}, II et III des courbes de revenu de la resistivite. Dans la deuxieme partie, un point particulier a ete mis en evidence: l'absence de phenomene de trainage magnetique dans un metal ferromagnetique irradie par des neutrons (a 27 deg. K). Quelques points d'interpretations preliminaires sont avances pour expliquer la difference notable entre le gadolinium et le cobalt. (auteur)

Bases biologiques du comportement social

CERN Document Server

Laborit, H

1994-01-01

Pour bien comprendre le comportement humain dans un environnement social,il est necessaire de comprendre comment fonctionne le systÂ?me nerveux central. L'une des principales fonctions du cerveau est de crÂ?er des relations entre leshumains.. .................

Iodine-131 production by a dry method using reactor-irradiated elementary tellurium. Part 1 - Conditions for obtaining iodine emanation and its capture. Part 2 - comparative study of preparation conditions using Pyrex, stainless steel and alumina equipment. Part 3 - production on a semi-industrial scale; Production de l'iode 131 par voie seche a partir de tellure elementaire irradie a la pile. 1ere partie - Etudes des conditions pour obtenir l'emanation de l'iode et le capter. 2eme partie - Etude comparee des conditions pour effectuer cette preparation avec des appareils en Pyrex, en acier inoxydable et en alumine. 3eme partie - production a l'echelle semi-industrielle

Energy Technology Data Exchange (ETDEWEB)

Bardy, A; Beydon, J; Murthy, T S; Doyen, J B; Lefrancois, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-04-15

A previous report has described how iodine 131 can be prepared from elementary tellurium by a dry method which consists in treating irradiated tellurium at 400 degrees in argon. The possibility of carrying out this treatment in a stainless steel or alumina apparatus has been considered. The behavior of gaseous iodine 131 towards these materials has thus been studied. If the adsorption of iodine on stainless steel is superficial desorption is rapid at 250 degrees in oxygen or 400 degrees in argon. If the adsorption is chemical in nature it becomes necessary to heat to higher temperatures. Adsorption of iodine on alumina is very weak and the iodine can be desorbed rapidly. With these materials tests have been carried out on 300 gms of tellurium containing 41 curies of iodine 131; the yields were very satisfactory ( 98 per cent). (author) [French] La methode de preparation de l iode 131 par voie seche a partir de tellure elementaire decrite dans un precedent rapport consiste a traiter le tellure irradie a 400 degres sous argon. Nous avons examine la possibilite d effectuer ce traitement dans un appareil en acier inoxidable ou en alumine. Le comportement de l iode 131 gazeux vis a vis de ces materiaux a donc ete etudie. Si l adsorption de l iode sur l acier inoxidable est superficielle la desorption est rapide a 250 degres sous oxygene ou 400 degres sous argon. Si la fixation est de nature chimique il est necessaire de chauffer a des temperatures plus elevees. L adsorption de l iode sur l alumine est res faible et l iode peut etre desorbe rapideemnt. En employant ces materiaux des essais ont ete obtenus sur 300 g de tellure contenant 41 curies d iode 131 avec un bon rendement (98 pour cent). (auteur00.

Fertilité des sols agricoles sous vigne et sous blé de la région de ...

African Journals Online (AJOL)

L'objectif de ce travail est l'évaluation agronomique de la qualité du sol sous vigne et sous blé dans la région Mohammedia-Benslimane au Maroc, à travers les indicateurs chimiques de la qualité du sol (pH, CE, CaCO3, Carbone organique total, Azote, Phosphore et Potassium). Les résultats de cette étude montrent que ...

Bases chimiosensorielles du comportement alimentaire chez les poissons

Directory of Open Access Journals (Sweden)

SAGLIO Ph.

1981-07-01

Full Text Available Le comportement alimentaire, indispensable à la survie de l'individu et donc de l'espèce, occupe à ce titre une position de première importance dans la hiérarchie des comportements fondamentaux qui tous en dépendent très étroitement. Chez les poissons, cette prééminence se trouve illustrée par l'extrême diversité des supports sensoriels impliqués et des expressions comportementales qui leur sont liées. A la suite d'un certain nombre de mises en évidence neurophysiologiques et éthologiques de l'importance du sens chimique (olfaction, gustation dans le comportement alimentaire des poissons, de très importants secteurs d'études électrophysiologiques et d'analyses physico-chimiques visant à en déterminer la nature exacte (en termes de substances actives se sont développés ces vingt dernières années. De tous ces travaux dont les plus avancés sont présentés ici, il ressort que les acides aminés de série L plus ou moins associés à d'autres composés de poids moléculaires < 1000 constituent des composés chimiques jouant un rôle déterminant dans le comportement alimentaire de nombreuses espèces de poissons carnivores.

Données récentes sur le comportement du grand cachalot (Physeter macrocephalus)

OpenAIRE

Goddard, Nicolas

2015-01-01

Le grand cachalot (Physeter macrocephalus) présente de nombreux comportements caractéristiques. Ces cétacés vivent les ¾ du temps en profondeur et peu de comportements sont directement visibles depuis la surface. Cette thèse bibliographique dresse un bilan sur ce qui est connu du comportement de cette espèce depuis les années 2000. Après avoir présenté les comportements généraux, les différents mouvements des cachalots sont analysés. Les différentes vocalisations, qui sont uniques aux cachalo...

Bases chimiosensorielles du comportement alimentaire chez les poissons

OpenAIRE

Saglio, P.

1981-01-01

Le comportement alimentaire, indispensable à la survie de l'individu et donc de l'espèce, occupe à ce titre une position de première importance dans la hiérarchie des comportements fondamentaux qui tous en dépendent très étroitement. Chez les poissons, cette prééminence se trouve illustrée par l'extrême diversité des supports sensoriels impliqués et des expressions comportementales qui leur sont liées. A la suite d'un certain nombre de mises en évidence neurophysiologiques et éthologiques de ...

Improvement of microbiological safety of sous-vide meals by gamma radiation

Energy Technology Data Exchange (ETDEWEB)

Farkas, J. E-mail: huto@omega.kee.hu; Polyak-Feher, K.; Andrassy, E.; Meszaros, L

2002-03-01

Experimental batches of smoked-cured pork in stewed beans sauce were inoculated with spores of psychrotrophic Bacillus cereus, more heat and radiation resistant than spores of non-proteolytic C. botulinum. After vacuum packaging, the meals were treated with combinations of pasteurizing heat treatments and gamma irradiation of 5 kGy. Prior and after treatments, and periodically during storage at 10 deg. C, total aerobic and total anerobic viable cell counts, and selectively, the viable cell counts of B. cereus and sulphite-reducing clostridia have been determined. The effects of the treatment order as well as addition of nisin to enhance the preservative efficiency of the physical treatments were also studied. Heat-sensitization of bacterial spores surviving irradiation occurred. The quality-friendly sous-vide cooking in combination with this medium dose gamma irradiation and/or nisin addition increased considerably the microbiological safety and the keeping quality of the meals studied. However, approx. 40% loss of thiamin content occurred as an effect of combination treatments, and adverse sensorial effects may also limit the feasible radiation doses or the usable concentrations of nisin.

Improvement of microbiological safety of sous-vide meals by gamma radiation

International Nuclear Information System (INIS)

Farkas, J.; Polyak-Feher, K.; Andrassy, E.; Meszaros, L.

2002-01-01

Experimental batches of smoked-cured pork in stewed beans sauce were inoculated with spores of psychrotrophic Bacillus cereus, more heat and radiation resistant than spores of non-proteolytic C. botulinum. After vacuum packaging, the meals were treated with combinations of pasteurizing heat treatments and gamma irradiation of 5 kGy. Prior and after treatments, and periodically during storage at 10 deg. C, total aerobic and total anerobic viable cell counts, and selectively, the viable cell counts of B. cereus and sulphite-reducing clostridia have been determined. The effects of the treatment order as well as addition of nisin to enhance the preservative efficiency of the physical treatments were also studied. Heat-sensitization of bacterial spores surviving irradiation occurred. The quality-friendly sous-vide cooking in combination with this medium dose gamma irradiation and/or nisin addition increased considerably the microbiological safety and the keeping quality of the meals studied. However, approx. 40% loss of thiamin content occurred as an effect of combination treatments, and adverse sensorial effects may also limit the feasible radiation doses or the usable concentrations of nisin

The Sous Vide Revolution: Coming Full Circle and Beyond

OpenAIRE

Hoeche, Ulrich

2016-01-01

For the purpose of this research, academic material and online sources were utilised to clarify the meaning of the key term sous vide. The Sous Vide Advisory Committee (1991) says ‘Sous Vide (also known as Cuisine en Papillote) is an interrupted catering system in which raw or par-cooked food is sealed into a vacuumised laminated plastic pouch or container, heat treated by controlled cooking, rapidly cooled and then reheated for service after a period of chilled storage’. According to Herb...

Radiculoplexopathie, anticorps anti Yo et cancer ovarien sous ...

African Journals Online (AJOL)

Les radiculo-plexopathies au cours des cancers sont le plus souvent d'origine métastatique. Leur origine dysimmune est rare. Nous rapportons un cas de radiculoplexopathie d'évolution favorable sous traitement immunomodulateur, survenue chez une patiente porteuse d'un carcinome ovarien bilatéral sous ...

Clichy-sous-Bois (France) operation

Energy Technology Data Exchange (ETDEWEB)

Dechamp, A

1984-09-01

The geothermal plant of Clichy-sous-Bois has been operating for 2 years and covers the needs of 3,400 equivalent-dwellings, including a sport-hall, 2 schools, the town-hall and 7 low-cost groups of flats. Geothermal energy covers 65% of the energy yearly global consumption for heating and sanitary hot water, i.e. 35,151 MWh. Thus, 3,195 TOE are saved each year. In December, 1979, the town of Clichy-sous-bois delegated their sponsorship to the Societe d'equipement et d'amenagement du territoire du departement de la Seine-Saint-Denis - SODETAT 93 for the realization of the geothermal operation. The production and injection wells were drilled between July and September, 1981. The Dogger aquifer was encountered at 1,800 m deep, with a temperature of 70,8/sup 0/C and an exploitation yield of 200m/sup 3//h. Surface works started in March 1982 and were completed in November of the same year. Apart from the geothermal power plant, the network comprises 11 exchange substations and a distribution network of 2,700 m long with 7,000 m of underground pipes. This plant is exploited by the Compagnie francaise d'exploitation thermique (COFRETH) within the framework of a farmout contract for 20 years, including: production, transportation and public distribution of geothermal heat all over the city of Clichy-sous-Bois.

The thorium phosphate diphosphate as matrix for radioactive waste conditioning: radionuclide immobilization and behavior under irradiation; Le phosphate diphosphate de thorium, matrice pour le conditionnement des dechets radioactifs: immobilisation de radionucleides, comportement sous irradiation

Energy Technology Data Exchange (ETDEWEB)

Pichot, Erwan [Inst. de Physique Nucleaire, Paris-11 Univ., 91 - Orsay (France)

1999-04-13

The aim of this work was to perform successively the decontamination of liquid solutions and the final immobilization of radionuclide storage using the same matrix. For this, thorium phosphate-diphosphate (TPD) of the formula Th{sub 4}P{sub 6}O{sub 23}, is proposed as a very resistant to water corrosion matrix. A new compound, thorium phosphate hydrogeno-phosphate (TPHP) of the formula Th{sub 2}(PO{sub 4}){sub 2}(HPO{sub 4}), nH{sub 2}O with n=3-7 was synthesized and characterized. Heated at 1100 deg.C it is transformed into the TDP. Ion exchange properties of TPHP were investigated. The exchange yields of imponderable caesium, strontium and americium ion onto TPHP (NaNO{sub 3} 0.1 M media at pH=6) are equal to 60% for the first one and 100% for the two others. The results interpreted in terms of ion-exchange led to determine selectivity coefficient values for each cation and suggested that only hydrated ions are exchanged. While the TPD is proposed for the high level nuclear waste storage, the irradiation effects, particularly structural modifications were studied using both {gamma} irradiation and charged particle irradiation. ESR and TL methods were carried out in order to identify radicals created during gamma radiation exposure. Correlation between ESR and TL experiments performed at room temperature clearly show three of PO{sub 3}{sup 2-} species and one POO{center_dot} species of free radicals. We have shown that Au-ion irradiation in the range of MeV energy involved TPD structure and chemical modifications. Important sputtering was interpreted in terms of local thermal chemical decomposition. We have shown, at room temperature, that the amorphization dose for heavy ion irradiation is between 0.1 to 0.4 dpa. (author) 146 refs., 46 figs., 21 tabs.

Le sous-titrage : une pratique à la marge de la traduction

Directory of Open Access Journals (Sweden)

Dumas, Louise

2014-12-01

Full Text Available Le sous-titre interlinguistique est un objet difficile à appréhender théoriquement. S'il permet d'aller d'une langue à une autre, il implique aussi un passage de l'écoute à la lecture et du cinéma à l'écriture. Le caractère interlinguistique est souvent mis en avant pour amener à considérer le sous-titrage comme une traduction. Sa complexité médiologique suggère toutefois qu'il est plus qu'une traduction. En même temps, les fortes contraintes (exigence de brièveté, de lisibilité, de cohérence avec l'image cinématographique auxquelles il est soumis font qu'il est moins qu'une traduction – moins exact, moins long, moins « équivalent » au texte original. Le présent travail se propose de réfléchir de manière théorique aux rapports entre sous-titrage et traduction. Pour ce faire, nous confronterons le sous-titrage aux concepts fondamentaux de la traductologie. Premièrement, le passage de l'oral à l'écrit opéré dans les sous-titres est intimement lié à la distinction traductologique entre traduction et interprétariat. Pour pouvoir condenser les dialogues, résumer leur contenu, le sous-titreur est amené à les interpréter, ce qui permet de souligner l'étroite parenté entre traduction, interprétariat et interprétation. Deuxièmement, les fortes contraintes auxquelles sont soumis les sous-titres invitent à s'interroger sur la notion d'équivalence qui se trouve normalement au principe de toute traduction. Toutes les théories traductologiques insistent sur le fait qu'une équivalence n'est jamais parfaite et que le traducteur privilégie certains niveaux d'équivalence : en poussant à l'extrême cette dynamique de sélection constitutive de l'équivalence, on peut considérer que les sous-titres sont équivalents aux dialogues. En tant que cas limite, le sous-titrage permet de tester les concepts fondamentaux de la traductologie et de définir leurs limites.

La base sous-marine de Bordeaux, sous le béton la culture

Directory of Open Access Journals (Sweden)

Mathieu Marsan

2012-06-01

Full Text Available Active à peine plus d’un an pendant l’Occupation, la base sous-marine de Bordeaux cristallise encore les souvenirs douloureux des heures sombres du Port de la Lune. Le bunker attire pourtant depuis les années 1960 des artistes, cinéastes, plasticiens et musiciens fascinés par l’esprit du lieu. Institutionnalisée au début des années 1990, la base sous-marine devient un espace dédié au nautisme avant d’être consacrée à l’art contemporain au début du XXIe siècle. Aujourd’hui au cœur du projet d’aménagement des bassins à flot du quartier de Bacalan, la base sous-marine questionne et intrigue ses visiteurs sur son passé, mais aussi – et surtout – sur son avenir.Build during the German occupation, the submarine base of Bordeaux active during hardly more than a year still crystallizes the painful memories of the dark hours of the « Port de la Lune ». Nevertheless, the bunker attracts artists, film-makers, visual artists and musicians fascinated by the spirit of the place since the 1960’s. Institutionalized at the beginning of 1990’s, the submarine base became a space dedicated to the yachting before contemporary art at the beginning of the XXIth century. Nowadays at the heart of the project of redevelopment of the wet docks in the urban area of Bacalan, the submarine base questions and intrigues its visitors on its past, but also – and especially – on its future.

Le cerveau sous effet placebo

OpenAIRE

Touzet , Claude

2017-01-01

International audience; Comment le fait de croire qu’on nous injecte de la morphine (alors qu’il s’agit de sérum physiologique) peut-il faire disparaître la douleur ? Investigation sur le cerveau sous placebo.

Comparative study of the creep behaviour of single crystals and polycrystals of alpha uranium; Etude comparee du comportement au fluage de l'uranium alpha mono et polycristallin

Energy Technology Data Exchange (ETDEWEB)

Andre, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-03-01

In the first chapter, one describes the creep machine developed to study the deformation of uranium at high temperature in vacuum with a continuous recording. The second chapter presents the results concerning the polycrystals of uranium. The application of the DORN method gives an activation energy for creep of 42 {+-} 2 Kc, above 550 Celsius degrees, equal to the activation energy for self-diffusion. The study of the variation of the creep rate with the applied stress and the metallographic observations of the deformation induced polygonization allow to conclude that the deformation is controlled by climb of dislocations. In the third chapter, the deformation above 550 Celsius degrees of single crystals of uranium (obtained by {beta} {yields} {alpha} change) is studied. The major deformation mode is slip. The preexisting polygonization of these single crystals is very stable and the disorientation between adjacent sub-grains increases with the deformation. The activation energy for creep is higher than that for polycrystals. These results show the influence of the polygonization due to the {beta} {yields} {alpha} change on the creep behaviour of {alpha} uranium. (authors) [French] Dans le premier chapitre, on decrit la machine de fluage sous vide a enregistrement continu, mise au point pour etudier le phenomene. Le deuxieme chapitre presente les resultats relatifs aux polycristaux. L'utilisation de la methode de DORN a permis de constater que, au-dessus de 550 degres Celsius, l'energie d'activation pour le fluage avait une valeur constante egale a 42 {+-} 2 Kc, voisine de la chaleur d'autodiffusion. L'etude de l'influence de la contrainte appliquee sur la vitesse de fluage et l'observation micrographique de la polygonisation developpee au cours de la deformation permettent de conclure que le phenomene est controle par la montee des dislocations. Dans le troisieme chapitre, on etudie le comportement au fluage au-dessus de 550 C des monocristaux obtenus par

Comportements Sexuels parmi les Adolescents et Jeunes

African Journals Online (AJOL)

AJRH Managing Editor

Cette étude a comme objectif spécifique d'analyser les prévalences des comportements sexuels à risque et leurs facteurs sociaux dans les pays francophones d'Afrique subsaharienne parmi les adolescents et jeunes, en mettant en exergue les diversités entre pays. Les données utilisées sont celles des Enquêtes ...

'You're repulsive': Limits to acceptable drunken comportment for young adults.

Science.gov (United States)

MacLean, Sarah; Pennay, Amy; Room, Robin

2018-03-01

Researchers have described a 'culture of intoxication' among young people. Yet drunkenness remains a socially risky practice with potential to evoke emotions of irritation and even disgust. We consider intoxicated practices that young adults in Melbourne, Australia, described as distasteful, to identify contemporary cultural forces that constrain intoxication and limit how it is enacted. Interviews were conducted with 60 participants in Melbourne, Australia, each with recent drinking experience. Participants were asked to provide accounts of moments when they regarded their own or others' drunken comportment as unsociable or unpleasant. Transcripts were analysed to identify recurrent themes. Despite amusement when recounting drunken antics, almost everyone in the study identified some discomfort at their own or other's drunkenness. We describe four interacting domains where lines delineating acceptable comportment appear be drawn. The first concerns intoxicated practices. Unpleasant drunken comportment often entailed a sense that the drunk person had disturbed others through an overflow of the self - extruding intimacy, sexuality, violence or bodily fluids. The second domain was gendering, with women vulnerable to being regarded as sexually inappropriate, and men as threatening. Third, the settings where intoxicated behaviour occurred influenced whether intoxicated people risked censure. Finally, the relationships between the drunk person and others, including their respective social positions and drinking patterns, shaped how they were perceived. The capacity of alcohol to render people more open to the world is both sought and reviled. It is important to recognise that there remain limits on acceptable drunken comportment, although these are complex and contingent. These limits are enforced via people's affective responses to drunkenness. This is form of alcohol harm reduction that occurs outside of public health intervention. Thus, cultures that constrain

Original Paper Influence de l'itinéraire technique sur les propriétés ...

African Journals Online (AJOL)

du sol sous culture du blé tendre (Triticum aestivum L.) dans une rotation de ... du sol sur le comportement physique et hydrique d'un sol destiné à la culture du blé tendre (Triticum aestivum. L.). ...... soil organic matter components and.

Changes in Meat Quality Characteristics of the Sous-vide Cooked Chicken Breast during Refrigerated Storage.

Science.gov (United States)

Hong, Go-Eun; Kim, Ji-Han; Ahn, Su-Jin; Lee, Chi-Ho

2015-01-01

This study was performed to investigate the changes in meat quality characteristics of the sous vide cooked chicken breast during refrigerated storage at 4℃ for 14 d between before and after sous-vide cooking. Cooking loss and shear force were significantly increased, whereas expressible drip was significantly decreased along with reduction in the water holding capacity in both of two groups. Redness of meat juice was significantly (p<0.05) increased during storage, and considerably increased in the refrigerated samples after sous-vide cooked at the 7 to 10 d. The thiobarbituric acid reactive substances (TBARS) was significantly increased and was higher in the refrigerator stored chicken breast samples after sous-vide cooking. The volatile basic nitrogen (VBN) value was significantly increased in both groups, but the VBN value of the stored raw meat sample before sous-vide cooking was increased at an early storage, while the VBN value of the stored sample after sous-vide cooking was increased gradually in this study. Total viable counts and coliform counts were significantly decreased during storage, and coliforms were not detected after 7 d of storage in both groups. Salmonella spp. was not detected during the whole studied period. The outcome of this research can provide preliminary data that could be used to apply for further study of chicken breast using sous-vide cooking method that could be attractive to consumers.

Etude du processus de changement vecu par des familles ayant decide d'adopter volontairement des comportements d'attenuation des changements climatiques

Science.gov (United States)

Leger, Michel T.

Les activites humaines energivores telles l'utilisation intensive de l'automobile, la surconsommation de biens et l'usage excessif d'electricite contribuent aux changements climatiques et autres problemes environnementaux. Bien que plusieurs recherches rapportent que l'etre humain est de plus en plus conscient de ses impacts sur le climat de la planete, ces memes recherches indiquent qu'en general, les gens continuent a se comporter de facon non ecologique. Que ce soit a l'ecole ou dans la communaute, plusieurs chercheurs en education relative a l'environnement estiment qu'une personne bien intentionnee est capable d'adopter des comportements plus respectueux de l'environnement. Le but de cette these etait de comprendre le processus d'integration de comportements d'attenuation des changements climatiques dans des familles. A cette fin, nous nous sommes fixe deux objectifs : 1) decrire les competences et les procedes qui favorisent l'adoption de comportements d'attenuation des changements climatiques dans des familles et 2) decrire les facteurs et les dynamiques familiales qui facilitent et limitent l'adoption de comportements d'attenuation des changements climatiques dans des familles. Des familles ont ete invitees a essayer des comportements personnels et collectifs d'attenuation des changements climatiques de sorte a integrer des modes de vie plus ecologiques. Sur une periode de huit mois, nous avons suivi leur experience de changement afin de mieux comprendre comment se produit le processus de changement dans des familles qui decident volontairement d'adopter des comportements d'attenuation des changements climatiques. Apres leur avoir fourni quelques connaissances de base sur les changements climatiques, nous avons observe le vecu de changement des familles durant huit mois d'essais a l'aide de journaux reflexifs, d'entretiens d'explicitation et du journal du chercheur. La these comporte trois articles scientifiques. Dans le premier article, nous presentons une

Irradiation tests on bitumen and bitumen coated materials; Essais d'irradiation de bitume et d'enrobes bitumineux

Energy Technology Data Exchange (ETDEWEB)

Tabardel-Brian, R.; Rodier, J.; Lefillatre, G. [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

1969-07-01

The use of bitumen as a material for coating high-activity products calls for prior study of the resistance of bitumen to irradiation. After giving briefly the methods of preparation of bitumen- coated products, this report lists the equipment which has been used for carrying out the {beta} and {gamma} irradiations of these products, and gives the analytical results obtained as a function of the dose rates chosen and of the total integrated dose. Finally, some conclusions have been drawn concerning the best types of bitumen. It should be stressed that some bitumens apparently underwent no degradation whatsoever nor any volume increase, for a total integrated dose of 1.8 x 10{sup 10} rads. (authors) [French] Dans le cadre de l'enrobage par le bitume des produits de haute activite, il est necessaire de verifier au prealable, la tenue du bitume a l'irradiation. Apres un bref rappel de la preparation des enrobes bitumineux, le present rapport regroupe les moyens qui ont ete mis en oeuvre, pour effectuer leurs irradiations sous rayonnement {beta} et sous rayonnement {gamma}, ainsi que les resultats des analyses qui ont ete faites en fonction des debits de doses choisis et de la dose totale integree. Enfin, des conclusions ont ete tirees sur les types de bitume a retenir. On peut souligner que certains bitumes n'ont subi aucune degradation apparente ni augmentation de volume pour une dose totale integree de 1.8 x 10{sup 10} rads. (auteurs)

Models for the Behavior of Offshore Structure Foundations. Part Two: Applications to Structural Design and Quality Assurance Processes Modèles pour le comportement des fondations d'ouvrages types marins. Deuxième partie : applications au calcul d'ouvrage et processus d'assurance qualité

Directory of Open Access Journals (Sweden)

Meimon Y.

2006-11-01

éveloppement d'une procédure de validation pour les modèles de géomatériaux (fig. 2. 1. - La réalisation d'outils pour la validation des modèles rhéologiques sur chemins homogènes. Des logiciels de détermination assistée par ordinateur de paramètres de modèles ont été développés, comme ADELAP pour I'IFP. La validation des modèles a été automatisée. Le logiciel VALOIS/IFP permet des applications intéressantes (fig. 2. 3 à 2. 5 avec sa banque de modèle rhéologiques et sa banque d'essais riche de 100 essais de qualité réalisés sur 4 matériaux granulaires. - La réalisation d'expérimentations de qualité sur l'ouvrage type fondation superficielleen laboratoire (fig. 2. 6 et 2. 7 comme en centrifugeuse (fig. 2. 8 à 2. 10. - La validation de nombreux modèles. En particulier, on montre les résultats obtenus avec le modèle CYCLADE aussi bien pour le chargement monotone (fig. 2. 13 et 2. 14 que pour le chargement cyclique (fig. 2. 13 à 2. 16 : pour les fondations superficielles courantes (de quelques m de diamètre CYCLADE fournit de bonnes prédictions du comportement en déplacement. Une comparaison avec d'autres modèles est également fournie (fig. 2. 17 à 2. 23. Application au calcul d'ouvrages marins : Dans ce chapitre, on montre l'application des modèles développés au calcul de plusieurs types d'ouvrages marins : - Fondations superficielles de grand diamètre reposant sur un sol argileux sous une tempête (fig. 3. 1 ou sous un chargement de longue durée (fig. 3. 2. - Comportement des plates-formes auto-élévatrices. Le comportement d'un pode isolé sous une tempête (125 cycles calculés incrémentalement avec CYCLADE, figure 3. est calculé et on compare les résultats avec ceux de la méthode du pseudo-fluage cyclique. Les caractéristiques de rigidité d'un pode isolé sous tempête sont étudiées quand on mixe les types de chargement (fig. 3. 4. Enfin, le comportement d'une plate forme sous plusieurs tempêtes est calculé pour analyser

Irradiation damage 'displacement zone'; Dommages sous irradiation zone de deplacements

Energy Technology Data Exchange (ETDEWEB)

Genthon, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-07-01

It is well known that a charged particle (ion, primary atom, etc...) moving in a solid slows down and can cause a cascade of displacements of the atoms in the solid. A study is made here of the extent to which the cascade is made up, or not, of independent collisions, as a function of the energy of the initial charged particle. When the distance between the collisions is small, these latter are no longer independent; the cascade, which then has to be considered as a whole, perturbs and locates, in the irradiated solid , a zone which has been named a 'displacement zone'. It is shown that the proportion of displacement zones increases with increasing atom size (high atomic number Z), with decreasing atomic distance D in the substance considered and with decreasing energy of the ion undergoing the slowing down process (although always remaining above a few hundred eV). The proportions obtained are higher than those corresponding to the calculations of J. A. Brinkman [3]. An interatomic potential required for this work has also been determined. (author) [French] On sait qu'une particule chargee (ions, atomes primaires, etc...) en mouvement dans un solide se ralentit, avec eventuellement deplacement en cascade d'atomes du solide. On etudie ici dans quelle proportion, en fonction de l'energie de la particule chargee initiale, la cascade est constituee, ou non, de 'chocs independants'. Lorsque la distance entre chocs est petite, ceux-ci ne sont plus independants; la cascade, qui doit alors etre consideree dans son ensemble, perturbe et definit dans le solide irradie, une zone qu'on a appele zone de deplacements. On montre que la proportion de zones de deplacements est d'autant plus grande que les atomes sont gros (nombre atomique Z grand), que la distance interatomique D est petite dans le corps considere, et que l'energie de l'ion en ralentissement est petite (tout en restant superieure a quelques centaines d'eV). Les proportions obtenues sont superieures a celles qui

SOUS LES PAVÉS: LA PLAGE!

DEFF Research Database (Denmark)

Clemmensen, Thomas Juel

2017-01-01

kunstnerbevægelse situationisterne brugte parolen sous les pavés: la plage! blev stranden associeret med det frie naturlige rum i kontrast til den brolagte gade, der repræsenterede samfundets undertrykkende orden. Men udtrykket kan samtidig minde os om geologiens allestedsnærværende karakter. Geologien findes lige...

Composes inter-halogenes sous pression: etude des transformations structurales dans le monobromure d'iode sous forme dense

Science.gov (United States)

Bouchard, Alexandre

La famille des composes halogenes et inter-halogenes representent des solides moleculaires adoptant des phases denses communes avec des solides moleculaires diatomiques comme l'azote et l'hydrogene. Parmi les transformations structurales et electroniques induites sous haute pression et observees dans ces solides, on note, entre autres, la dissociation moleculaire et la metallisation. De plus, l'etude des phases denses de l'iode a permis recemment l'observation d'une structure cristalline possedant une modulation dite incommensurable, c'est-a-dire une modulation possedant une periodicite differente de celle de la structure cristalline, jetant ainsi une lumiere nouvelle sur le processus de dissociation moleculaire dans les solides halogenes. Dans ce memoire, on propose d'etudier les changements structuraux dans monobromure d'iode (IBr), un compose inter-halogene possedant des proprietes structurales semblables a celles de deux composes halogenes, soit l'iode (I 2) et le brome (Br2) sous leur forme solide. Des experiences de diffraction des rayons X de poudres en utilisant un rayonnement synchrotron ont ete realisees a temperature ambiante sur l'IBr en variant la pression jusqu'aux environs de 60 GPa. La nature chimique particuliere du compose IBr a necessite la mise au point de techniques de chargement d'echantillon destinees a preserver l'integrite chimique de la substance utilisee. On rapporte egalement l'observation d'une phase de l'IBr presentant une modulation incommensurable. Les phases observees dans l'IBr permettent d'etablir des paralleles avec les phases denses rapportees dans I2 et Br2 par le biais d'un modele phenomenologique decrivant la sequence structurale des solides halogenes sous forme condensee.

Etude Du Comportement Dynamique D'un Systeme De Pompage ...

African Journals Online (AJOL)

SIMULINK le comportement dynamique d'un système de pompage composé d'un générateur photovoltaïque, d'un onduleur, d'un moteur à induction et d'une pompe centrifuge. Le modèle global du système est bouclé : la sortie tension du GPV est ...

Analysis of working conditions and comportment of prevention in radiation protection

International Nuclear Information System (INIS)

Bouhnik, C.

1992-01-01

In this article, the author presents analysis methods of working conditions( environment of working stations, working stress, socio-technical environment, ability and, emotion and relation phenomena) that permit to understand how the prevention comportment is regulated

Deep geothermal energy: the Soultz-sous-Forets experience

International Nuclear Information System (INIS)

Genter, A.; Guenot, N.; Graff, J.J.

2010-01-01

This paper presents the mining exploitation project of the geothermal heat at Soultz-sous-Forets, located 50 km NE of Strasbourg (Bas Rhin, France). A geothermal power plant, inaugurated mid-2008, will commercialize its own power generation soon. This power plant is owned by a consortium of French-German industrialists through the European economical interest group for the mining exploitation of heat. The paper presents the geological characteristics of the hot dry rock geothermal reservoir, the deep geothermal wells, the hydraulic stimulation of the reservoir rock, the surface equipments of the power plants and the production pumps, the activities of the site in 2008 and 2009 and the perspectives of development of this energy source in France in the light of the Soultz-sous-Forets site experience. (J.S.)

Generalities on the dynamic behaviour of rapid reactors. Preliminary studies on Rapsodie; Generalites sur le comportement dynamique des piles rapides. Etudes preliminaires de rapsodie

Energy Technology Data Exchange (ETDEWEB)

Campan, J L; Chaumont, J P; Clauzon, P P; Ghesquiere, G; Leduc, J; Schmitt, A P; Zaleski, C P [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

1963-07-01

The study of the dynamic behaviour of fast reactors may be divided into three section: 1. Stability studies around equilibrium power only the linear case was examining. S. Transient studies in the case of usual reactor operation (shut down, scram, etc.) with thermal shocks evaluation, for instance. 3. Explosion studies, for the maximum credible accidents. This report presents the status of the studies performed at the 'Physics Research Department' at Cadarache. Methods used are detailed and illustrated with the results obtained on a preliminary metallic core of the Rapsodie Reactor. (authors) [French] Le comportement dynamique des piles rapides, se presente tout naturellement sous trois aspects: 1. Etude de stabilite autour d'un regime d'equilibre (nous nous sommes bornes ici au cas lineaire). 2. Etude de regimes transitoires lors des operations normales de pile (arret, arret d'urgence, etc.) avec evaluation des chocs thermiques par exemple. 3. Etude des regimes transitoires de caractere explosif lors des accidents les plus graves possibles. Ce rapport presente l'etat des etudes a la date du 20 decembre 1961 a la Section d'Etudes de Piles Rapides a CADARACHE. Les methodes employees ont ete detaillees et illustrees a partir des resultats obtenus sur une premiere version 'combustible metallique' de Rapsodie. (auteurs)

Etude expérimentale et analyse probabiliste du comportement à la ...

African Journals Online (AJOL)

DK

en traction de composites verre-perlon-acrylique à usage orthopédique. Experimental ... du comportement à la rupture de ces stratifiés ainsi que l'aspect probabiliste de cette dernière sont décrits .... signification physique qui donne au volume.

Enlargement of the iliopsoas comportment

International Nuclear Information System (INIS)

Garcia, M.; Gonzalez, J.; Martinez, A.; Garcia, M.A.; Relea, A.; Narajo, G.

1996-01-01

The iliopsoas or iliopectineal comportment is a normal structure that occasionally communicates with the synovial cavity of the hip. Rarely, in association with certain pathologies that raise the intraarticular pressure, it becomes enlarged, producing an inguinal or pelvic mass, also referred to as iliopsas bursitis. We present five cases of this pathology detected over the past year in our hospitals. Three of the patients had undergone previous vascular punctures in the hip involved, one presented brucellosis-related arthropathy and the fifth had generative joint abnormalities. The plain radiography, arthrography, ultrasound, CT,CT-guided arthrography and MR images are provided and discussed. We present an etiological factor of this process (previous vascular puncture) that has not been previously reported in the literature. 13 refs

Study and simulation of the behaviour under irradiation of helium in uranium dioxide; Etude et modelisation du comportement sous irradiation de l'helium dans le dioxyde d'uranium

Energy Technology Data Exchange (ETDEWEB)

Martin, G

2007-06-15

Large quantities of helium are produced from {alpha}-decay of actinides in nuclear fuels during its in-pile operating and its storage. It is important to understand the behaviour of helium in these matrix in order to well simulate the evolution and the resistance of the fuel element. During this thesis, we have used nuclear reaction analyses (NRA) to follow the evolution of the helium implanted in polycrystalline and monocrystalline uranium dioxide (UO{sub 2}). An experimental rig was developed to follow the on-line helium release in UO{sub 2} and the evolution of {sup 3}He profiles as a function of annealing temperature. An automated procedure taking into account the evolution of the depth resolution was developed. Analyses performed with a nuclear microprobe allowed to characterise the spatial distribution of helium at the grain scale and to study the influence of the sample microstructure on the helium migration. This work put into evidence the particular role of grain boundaries and irradiation defects in the helium release process. The analyse of experimental results with a diffusion model corroborates these interpretations. It allowed to determine quantitatively physical properties that characterise the helium behaviour in uranium dioxide (diffusion coefficient, activation energy..). (author)

The oscillatory behavior of heated channels: an analysis of the density effect. Part I. The mechanism (non linear analysis). Part II. The oscillations thresholds (linearized analysis); Sur le comportement oscillatoire de canaux chauffes. - Etude theorique de l'effet de densite. 1ere partie: le mecanisme (analyse non lineaire), 2eme partie: seuils d'oscillation (analyse lineaire)

Energy Technology Data Exchange (ETDEWEB)

Boure, J [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Grenoble, 38 (France)

1967-07-01

The problem of the oscillatory behavior of heated channels is presented in terms of delay-times and a density effect model is proposed to explain the behavior. The density effect is the consequence of the physical relationship between enthalpy and density of the fluid. In the first part non-linear equations are derived from the model in a dimensionless form. A description of the mechanism of oscillations is given, based on the analysis of the equations. An inventory of the governing parameters is established. At this point of the study, some facts in agreement with the experiments can be pointed out. In the second part the start of the oscillatory behavior of heated channels is studied in terms of the density effect. The threshold equations are derived, after linearization of the equations obtained in Part I. They can be solved rigorously by numerical methods to yield: -1) a relation between the describing parameters at the onset of oscillations, and -2) the frequency of the oscillations. By comparing the results predicted by the model to the experimental behavior of actual systems, the density effect is very often shown to be the actual cause of oscillatory behaviors. (author) [French] Premiere partie: mecanisme (equations non linearisees). On expose le probleme du comportement oscillatoire des canaux chauffes en mettant l'accent sur la presence de retards dans le systeme et on propose un modele a 'effet de densite' pour expliquer ce comportement. L'effet de densite est la consequence de la relation physique entre l'enthalpie et la masse volumique du fluide. Les equations non lineaires du schema mathematique correspondant sont etablies et mises sous forme adimensionnelle. L'analyse de ces equations conduit a une description du mecanisme des oscillations. On donne la liste des parametres dont depend le comportement du modele. A ce stade de l'etude, on peut deja relever dans ce comportement plusieurs faits conformes a l'experience. Deuxieme partie: seuils d

Guide pour la rédaction de cahiers des charges pour la sous-traitance en mécano-soudage

CERN Document Server

Cheminat, Olivier

2016-01-01

Ce rapport est principalement dédié aux rédacteurs de cahiers des charges lors de sous-traitance en soudage. Le choix de faire sous-traiter une fabrication et le choix du sous-traitant revêtent une triple dimension technique, économique et stratégique. Un sous-traitant n'est pas un simple fournisseur ; il est un véritable partenaire technique pour le donneur d'ordre qui lui confie la réalisation d'un produit qu'il a lui-même conçu. La sous-traitance nécessite alors, outre un audit préalable du partenaire, un suivi en continu, à distance, et une communication entre le donneur d'ordre et le sous-traitant. Le cahier des charges est un des éléments de cette communication. C'est un outil essentiel, notamment lorsque le marché est soumis à des normes, imposées par contrat entre le donneur d'ordre et le sous-traitant. Ce présent document est un guide pour la rédaction du document de consultation, afin d'être le plus précis et exhaustif possible, mais il ne saurait être utilisé pour établi...

Spécificités du sous-titrage pour enfants malentendants

OpenAIRE

Comitre-Narvaez, Isabel

2016-01-01

Ce travail aborde la spécificité multisémiotique du texte audiovisuel qui est à l’origine de nombreux défis que le traducteur audiovisuel doit relever. Il explore les rapports intersémiotiques qui s’établissent entre le code verbal et le code visuel et se concentre sur les particularités du sous-titrage pour sourds et malentendants dans la “compensation” du déficit auditif, essentiellement son rapport spécifique à l’image. À cet égard, Gottlieb signale que le succès du sous-titrage dépend du ...

ETUDE DU COMPORTEMENT MECANIQUE DES ACIERS HYPEREUTECTOIDES DANS LE DOMAINE DE TEMPERATURE INTERCRITIQUE DYNAMIQUE

Directory of Open Access Journals (Sweden)

R GHERIANI

2001-06-01

Full Text Available L'étude que nous présentons contribue à une meilleure compréhension de l'influence de la vitesse de déformation et de la température sur le comportement mécanique des aciers hypereutectoïdes dans le domaine de température intercritique dynamique. Les courbes expérimentales obtenues en torsion présentent un intérêt notable dans la mesure où elles permettent de caractériser le comportement mécanique de l'acier 100C6; de plus, elles fournissent  des informations précieuses sur la capacité maximale de déformation de l'alliage. Les essais de torsion, menés jusqu'à rupture des éprouvettes, permettent d'effectuer un classement des matériaux selon leur ductilité. Les résultats obtenus sur l'acier 100C6 ont permis de préciser le comportement mécanique à tiède  de cet acier. Les aciers hypoeutectoïdes présentent, dans les domaines de température compris entre Ac1 et Ac3 en condition dynamique, une capacité de déformation élevée résultant de l'évolution, en cours de déformation, des phases a et g et de leurs mécanismes d'adoucissement. Nous nous sommes alors posé la question: quel est le comportement d'un acier hypereutectoïde, donc ne présentant  pas de domaine biphasé (a + g à l'équilibre, lorsqu'il est déformé à une température supérieure à Ac1?

Comportement des matériaux organiques vis-à-vis des carburants oxygénés The Behavior of Organic Materials with Regard to Oxygenated Fuels

Directory of Open Access Journals (Sweden)

Puisais M.

2006-11-01

Full Text Available Les incidences d'emploi des produits oxygénés dans les carburants ont été déterminées sur la tenue des principaux matériaux polymères utilisés dans les véhicules et les équipements de distribution. Des carburants renferment diverses teneurs en éthanol ou en méthanol, éventuellement en conjonction avec des co-solvants tels que le tertiobutanol ou un mélange acétonobutylique ont été examinés. Les méthodes d'essais appliquées ont permis de déterminer le comportement à long terme des matériaux au niveau de leur perméabilité, gonflement, vieillissement, fissuration sous contraintes, extraction et résistance à l'ozone. The effects of using oxygenated products in gasolines have been determined concerning the resistance of the leading polymer materials used in vehicles and distribution equipment. Fuels containing varying amounts of ethanol or methanol, possibly in conjunction with cosolvents such as tertiobutanol or a butanol-acetone mixture, have been examined. The test methods applied have determined the long-term behavior of materials with regard to their permeability, swelling, aging, stress cracking, extraction and ozone resistance.

Application of Advanced Material for Turbomachinery and Rocket Propulsion

Science.gov (United States)

1988-10-01

de fatigue oligocyclique sous charges nominales a 6t6 r~alisi avec succ~s. L’instrumentation en jauges de contrainte a confirm6 lea niveaux de...thermocouples, peintures thermosensibles et jauges de contraintes de fagon A mieux 6valuer leur comportement dans l’environnement du moteur. Aucune anomalie n’s

Afrika Statistika ISSN 2316-090X Comportement de la fonction d ...

African Journals Online (AJOL)

Dans le cas o`u la variable observée Xt est retardée de h > 0 et alors st = Xt−h, .... Nous exposons `a la Figure 5 le comportement de l'ACF de quelques séries issues ..... nous effectuons des simulations de Monte-Carlo, d'une part, pour exam-.

Case report

African Journals Online (AJOL)

abp

29 avr. 2016 ... Le bilan immunologique. (anticorps anti nucléaires, anti J01, anti Sm, anti RNP, anti SSa et anti SSb) était négatif. La biopsie des ... clinico-biologique effectué à la recherche d'une néoplasie sous- jacente et comportant: l'examen physique, les marqueurs tumoraux, la fibroscopie digestive, la radiographie ...

Étude expérimentale du comportement cyclique d'un acier du type 316 L sous chargement multiaxial complexe en traction-torsion-pressions interne et externe

Science.gov (United States)

Bocher, L.; Delobelle, P.

1997-09-01

are very rich in informations and lead to classify the different types of loading, with two or three cyclic components, with respect to the observed supplementary hardening. This classification was established as follows: i) The in-phase tests with two or three components (δ = \\varphi = 0^circ); no supplementary hardening is observed. ii) The tension-pressure tests such as r_1 = 1, \\varphi = 90^circ and r_1 = - 1, \\varphi = 60^circ, the hardening is slightly inferior to that of tension-torsion tests. iii) The tension-torsion tests such as r_2 = 1 and δ = 90^circ, where a substantial additionnal hardening takes place. iv) The tension-torsion-pressure tests where the three components are strongly shifted, namely: r_1 = r_2 = 1, δ = 90^circ and \\varphi = 60^circ, and r_2 = 1, r_1 = -1, δ = 41.4^circ and \\varphi = 82.8^circ. The hardening is slightly superior to the one recorded in tension-torsion. A more thorough study is in preparation which considers all the possible combinations in tension-torsion-pressures, and will be performed on the same material. The early results tend to validate the observations presented in this article. Cette étude réside dans la détermination expérimentale du comportement à la température ambiante de l'acier inoxydable 316 L sous chargement cyclique non proportionnel en traction-torsion-pressions interne et externe. Les deux ou trois déformations sinusoïdales appliquées sont soit en phase, soit hors-phase et l'on étudie l'amplitude du durcissement supplémentaire en fonction du degré de multiaxialité. On présente quelques boucles stabilisées typiques. Par rapport au durcissement supplémentaire maximal, les différents essais peuvent être classés comme suit: essais en phase (pas de durcissement supplémentaire), essais de traction-pressions hors-phase, essais de traction-torsion hors phase et essais de traction-torsion-pressions avec déphasages conséquents.

Study of the Szilard-Chalmers effect on potassium ferrocyanide; Etude de l'effet Szilard-Chalmers sur le ferrocyanure de potassium

Energy Technology Data Exchange (ETDEWEB)

Henry, R; Aubertin, C; Valade, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

Irradiation conditions and a simple chemical treatment are described, for obtaining from potassium ferrocyanide the mixture {sup 55}Fe, {sup 59}Fe with a high specific activity. The recoil behaviour of the two isotopes is shown to be different: because of its greater energy {sup 55}Fe will be enriched by extraction of the ejected atoms from the rest of the molecule. An attempt is made to explain the increase in retention as proportional to the decrease in specific activity. (author) [French] Les conditions d'irradiation du ferrocyanure de potassium et un traitement chimique simple sont donnes pour permettre l'obtention du melange {sup 55}Fe, {sup 59}Fe de grande activite specifique. On a mis en evidence une difference de comportement des deux isotopes sous l'effet de recul; l'energie plus grande du {sup 55}Fe permettant son enrichissement par extraction des atomes ejectes du reste de la molecule. Un essai d'explication de l'augmentation de la retention proportionnellement a la diminution de l'activite specifique est donne. (auteur)

Caractérisation locale de la rupture de tissu hépatique

OpenAIRE

BRUNON, A

2008-01-01

L'objectif de cette étude est de prédire numériquement l'apparition de lésions dans le foie humain, sous l'effet d'un impact. Elle se base sur des essais expérimentaux qui tendent vers une sollicitation aussi réaliste que possible, et conduisent à un modèle de comportement et des critères de rupture implantables dans un code numérique qui intégrerait à la fois la structure - complexe - du foie et le comportement de ses différents constituants. Mémoire de Master 2 MEGA, INSA de Lyon, ss la dir...

Evaluation experimentale et theorique du comportement a la flexion de nouveaux poteaux en materiaux composites

Science.gov (United States)

Metiche, Slimane

La demande croissante en poteaux pour les differents reseaux d'electricite et de telecommunications a rendu necessaire l'utilisation de materiaux innovants, qui preservent l'environnement. La majorite des poteaux electriques existants au Canada ainsi qu'a travers le monde, sont fabriques a partir de materiaux traditionnels tel que le bois, le beton ou l'acier. Les motivations des industriels et des chercheurs a penser a d'autres solutions sont diverses, citons entre autre: La limitation en longueur des poteaux en bois ainsi que la vulnerabilite des poteaux fabriques en beton ou en acier aux agressions climatiques. Les nouveaux poteaux en materiaux composites se presentent comme de bons candidats a cet effet, cependant; leur comportement structural n'est pas connu et des etudes theoriques et experimentales approfondies sont necessaires avant leur mise en marche a grande echelle. Un programme de recherche intensif comportant plusieurs projets experimentaux, analytiques et numeriques est en cours a l'Universite de Sherbrooke afin d'evaluer le comportement a court et a long termes de ces nouveaux poteaux en Polymeres Renforces de Fibres (PRF). C'est dans ce contexte que s'inscrit la presente these, et notre recherche vise a evaluer le comportement a la flexion de nouveaux poteaux tubulaires coniques fabriques en materiaux composites par enroulement filamentaire et ce, a travers une etude theorique, ainsi qu'a travers une serie d'essais de flexion en "grandeur reelle" afin de comprendre le comportement structural de ces poteaux, d'optimiser la conception et de proposer une procedure de dimensionnement pour les utilisateurs. Les poteaux en Polymeres Renforces de Fibres (PRF) etudies dans cette these sont fabriques avec une resine epoxyde renforcee de fibres de verre type E. Chaque type poteaux est constitue principalement de trois zones ou les proprietes geometriques (epaisseur, diametre) et les proprietes mecaniques sont differentes d'une zone a l'autre. La difference

Development of Pangasius steaks by improved sous-vide technology and its process optimization.

Science.gov (United States)

Kumari, Namita; Singh, Chongtham Baru; Kumar, Raushan; Martin Xavier, K A; Lekshmi, Manjusha; Venkateshwarlu, Gudipati; Balange, Amjad K

2016-11-01

The present study embarked on the objective of optimizing improved sous - vide processing condition for development of ready-to-cook Pangasius steaks with extended shelf-life using response surface methodology. For the development of improved sous - vide cooked product, Pangasius steaks were treated with additional hurdles in various combinations for optimization. Based on the study, suitable combination of chitosan and spices was selected which enhanced antimicrobial and oxidative stability of the product. The Box-Behnken experimental design with 15 trials per model was adopted for designing the experiment to know the effect of independent variables, namely chitosan concentration (X 1 ), cooking time (X 2 ) and cooking temperature (X 3 ) on dependent variable i.e. TBARS value (Y 1 ). From RSM generated model, the optimum condition for sous - vide processing of Pangasius steaks were 1.08% chitosan concentration, 70.93 °C of cooking temperature and 16.48 min for cooking time and predicted minimum value of multiple response optimal condition was Y = 0.855 mg MDA/Kg of fish. The high correlation coefficient (R 2  = 0.975) between the model and the experimental data showed that the model was able to efficiently predict processing condition for development of sous - vide processed Pangasius steaks. This research may help the processing industries and Pangasius fish farmer as it provides an alternative low cost technology for the proper utilization of Pangasius .

Quelques aspects du traitement de l’espace dans Portulan de Roland Pécout

OpenAIRE

Verny, Marie-Jeanne

2015-01-01

Sous le titre de Portulan, on a coutume de faire référence à deux volumes parus le premier en 1978 chez Vent Terrai, dans la collection « Documents ». le deuxième en 1980 chez Tarabusta à Montpellier. Le premier ouvrage s’intitule simplement : Portulan, sans référence à son caractère de premier volume, et comporte un sous-titre : « Itinerari en Orient ». Le deuxième ouvrage porte le titre de Portulan II. Sa quatrième de couverture fait mention de Portulan I et présente en substance le premier...

Espace de comportement et espace microgéographique: le jeu de la «Révolution Verte»

Directory of Open Access Journals (Sweden)

Peter GOULD

1987-03-01

Full Text Available Les relations bidimensionnelles sont examinées entre les joueurs dans l'espace microgéographique de la salle de jeu et dans l'espace de comportement engendré par les interactions qu'ils perçoivent. Les asymétries sont interprétées comme étant des «vents de pauvreté» et des effets de comportement antisocial. L'analyse cartographique combinée à la multidimensionnalité et à la régression euclidienne crée des intuitions sur de simples relations structurelles qui restent à examiner.

Palatability of sous vide processed chicken breast.

Science.gov (United States)

Turner, B E; Larick, D K

1996-08-01

The influences of brine composition, internal temperature, heating rate, and storage periods up to 28 d on flavor, texture, and color of sous vide processed chicken breast were evaluated. Pectoralis major muscles containing water and sodium chloride, with or without sodium lactate, were browned and vacuum packaged. Sous vide processing was by fast or slow heating to an internal temperature of 77 or 94 C. Product was evaluated after 0, 14, and 28 d storage at 4 C. Quality was evaluated by gas chromatographic analyses of flavor volatiles, shear, color, and sensory panels. Incorporation of sodium lactate into brine did not influence oxidative stability (as measured by headspace gas chromatography) or sensory warmed-over flavor. Presence of sodium lactate did result in enhanced fresh roasted or meaty and saltiness sensory scores as well as a more yellow color. The more rapid heating rate decreased sulfur-containing compounds and did not influence other volatile concentrations. Products processed to 94 C were less juicy, less tender, and contained higher quantities of alcohols and hydrocarbons than those processed to 77 C. Storage resulted in a decline in fresh roasted or meaty flavor note and an increase in warmed-over flavor note and quantities of alcohols, aldehydes and ketones, hydrocarbons, and total headspace volatiles.

Comportement à la corrosion intrinsèque de couches minces à base ...

African Journals Online (AJOL)

Comportement à la corrosion intrinsèque de couches minces à base d'aluminium (Al-M: M=Mo, Mg, ... Département de Physique, Université Badji Mokhtar, BP 12, Annaba 23000, Algérie. .... dépôts réalisés sur substrat en verre servent pour la ...

Influence du comportement des accompagnants sur le vécu des patients admis pour hémorragies digestives hautes au CHU campus de Lomé (Togo)

Science.gov (United States)

Bagny, Aklesso; Dusabe, Angelique; Bouglouga, Oumboma; Lawson-ananisoh, Mawuli Late; Kaaga, Yeba Laconi; Djibril, Mohaman Awalou; Soedje, Kokou Mensah; Dassa, Simliwa Kolou; Redah, Datouda

2014-01-01

Introduction L'hémorragie digestive haute est une urgence, qui constitue souvent pour les patients un danger mortel suscitant inquiétude et agitation. Dans cet état, le patient dépend de ses accompagnants pour ses soins et pour honorer le traitement; mais souvent, il a été observé une discordance entre l'urgence et les comportements des accompagnants. Le but de cette étude était de décrire les facteurs socioéconomiques et psychologiques pouvant influencer les comportements des accompagnants des patients admis pour HDH, estimer l'indice de relation entre ces comportements et les facteurs associés d'une part et le vécu des patients admis pour HDH d'autre part. Méthodes Il s'agit d'une étude prospective menée de Septembre 2010 à Juin 2011 (soit 10 mois). Nous avions utilisé l'entretien semi-dirigé et l'observation directe pour collecter nos données, ces dernières avaient été traitées par les méthodes statistiques et d'analyse de contenu. Résultats Dans la présente étude, les comportements des accompagnants des patients admis pour HDH sont en majorité marqués par l'abandon (84%) et le manque de sollicitude (80,2%). Ces comportements sont souvent stimulés par les facteurs socioéconomiques tels que les difficultés économiques (83,2%), des conflits intrafamiliaux (85,1%) et des représentations (maladie incurable ou envoûtement) de la maladie par les accompagnants (73,3%) des cas. Quant aux patients, ils vivent ces comportements comme étant des menaces de mort ou des rejets (77,20%) et comme étant une dévalorisation ou une humiliation de la part de leurs accompagnants (70,30%). Les résultats confirment l'existence de lien significatif entre les comportements des accompagnants et les facteurs socio économiques, entre les comportements des accompagnants et des facteurs psychologiques, et entre le vécu des patients admis pour l'HDH et les comportements des accompagnants. Conclusion Des études ultérieures devraient aborder les points

Structure et comportement des modeles mathematiques en biologie

OpenAIRE

Gouzé , Jean-Luc

1988-01-01

Nous décrivons une méthodologie assez générale pour construire des modèles mathématiques en biologie. A partir de la structure du modèle, on peut déduire des résultats sur le comportement des solutions du système différentiel : existence et stabilité de spoints stationnaires, des solutions périodiques... Ces résultats dépendent suelement des relations structurelles dans le modèle, et pas de la formulation quantitative des fonctions qui décrivent ces relations.

Volatile compound profile of sous-vide cooked lamb loins at different temperature-time combinations.

Science.gov (United States)

Roldán, Mar; Ruiz, Jorge; Del Pulgar, José Sánchez; Pérez-Palacios, Trinidad; Antequera, Teresa

2015-02-01

Lamb loins were subjected to sous-vide cooking at different combinations of temperature (60 and 80°C) and time (6 and 24h) to assess the effect on the volatile compound profile. Major chemical families in cooked samples were aliphatic hydrocarbons and aldehydes. The volatile compound profile in sous-vide cooked lamb loin was affected by the cooking temperature and time. Volatile compounds arising from lipid oxidation presented a high abundance in samples cooked at low or moderate cooking conditions (60°C for 6 and 24h, 80°C for 6h), while a more intense time and temperature combination (80°C for 24h) resulted on a higher concentration of volatile compounds arising from Strecker degradations of amino acids, as 2-methylpropanal and 3-methylbutanal. Therefore, sous-vide cooking at moderately high temperatures for long times would result in the formation of a stronger meaty flavor and roast notes in lamb meat. Copyright © 2014 Elsevier Ltd. All rights reserved.

Rhéologie des alliages de fer pur. Lois de comportement a chaud avec recristallisation dynamique

OpenAIRE

Belkebir , Abdellah

1994-01-01

pas de résumé en anglais; Le comportement rhéologique des aciers, élabores a partir de fer de haute pureté, a été caractérisé par compression a chaud. Pour mettre en évidence l'influence individuelle ou conjointe des phénomènes de ségrégation et de précipitation, trois nuances d'acier ont été étudiées. L'influence de la vitesse et de la température de déformation sur le comportement de ces alliages a été examinée a travers les variations des paramètres rhéologiques (coefficient de sensibilité...

Modélisation et simulation numérique du comportement vibratoire ...

African Journals Online (AJOL)

HP 250

Modeling and numerical simulation of gear vibratory behavior ... Une étude paramétrique a été réalisée sous Matlab pour ..... fissure sur le signal de vibration est la modulation d‟amplitude autour de la fréquence d‟ .... Signal Process, Vol.

Effect of sous vide processing on physicochemical, ultrastructural, microbial and sensory changes in vacuum packaged chicken sausages.

Science.gov (United States)

Naveena, B M; Khansole, Panjab S; Shashi Kumar, M; Krishnaiah, N; Kulkarni, Vinayak V; Deepak, S J

2017-01-01

The processing of sous vide chicken sausages was optimized under vacuum packaging condition and cooking at 100 ℃ for 30 min (SV30), 60 min (SV60) and 120 min (SV120) and compared with aerobically cooked control at 100 ℃ for 30 min. Sous vide processing of chicken sausages (SV30) produced higher (p emulsion ultra-structure due to SV30 processing relative to control sausages. Sous vide processing of chicken sausages enriched with rosemary diterpene phenols retained the freshness and quality up to 120 days during storage at 4 ± 1 ℃ relative to control sausages that were spoiled on 20th day. Lipid oxidation and microbial growth remained below the spoilage levels for all the SV-processed sausages throughout the storage and addition of rosemary diterpene mixture at 0.02% v/w reduced the microbial growth and improved (p < 0.05) the sensory attributes. Our results demonstrate that sous vide processing minimizes lipid oxidation and microbial growth of chicken sausages with improved product quality and shelf-life at 4 ± 1 ℃. © The Author(s) 2016.

High pressure experimental water loop; Cellule experimentale a eau sous pression

Energy Technology Data Exchange (ETDEWEB)

Grenon, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Terny, M [Societe Grenobloise d' Etudes et d' Applications Hydrauliques, 38 (France)

1958-07-01

, deux cyclones, l'un decanteur et l'autre separateur de gaz, et un echangeur a tubes; sur ce circuit principal est monte en derivation un circuit de purification continue avec detendeurs et pot de resines devant permettre en plus l'etude de la tenue des resines a la pression et a la temperature; a la sortie du cyclone degazeur est branche un circuit de gaz destine a l'etude de la recombinaison des gaz de radiolyse en phase vapeur. Le circuit de resines, le circuit de gaz, ainsi que divers petits circuits de prelevement reviennent tous a un circuit de stockage basse pression; une pompe de relevage, refoulant sous 160 kg/cm{sup 2} et asservie au niveau dans le pressuriseur, reinjecte en permanence de l'eau du circuit basse pression au circuit principal. Cette cellule constitue un banc d'essai egalement pour le materiel etanche a haute pression. La pompe de circulation et les brides de raccordement (du type Oak Ridge) sont etanches; la pompe d'alimentation et les detendeurs ne sont pas etanches; des vannes etanches sont a l'essai, les autres vannes non etanches comportent une recuperation des fuites. Un systeme detecteur de fuites d'un principe analogue a celui utilise sur la pile americaine HRT a ete monte sur ce circuit et permet un controle permanent de l'etancheite. (auteur)

X-ray diffraction studies of neutron irradiated beryllium oxide; Etude par diffraction des rayons X de glucine irradiee aux neutrons

Energy Technology Data Exchange (ETDEWEB)

Belbeoch, B; Rodot, J; Roulliay, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1966-07-01

X-ray diagrams of neutron irradiated sintered BeO (E > 1 MeV) can be classified into 3 types depending on the value of the c/a ratio, independently of the characteristics of the sinters, (hot pressed or cold pressed, material, variable density and grain size, pure BeO or BeO with additions). The anisotropic expansion of the BeO lattice caused by irradiation depends not only on the dose of irradiation, but also on the intergranular stresses of the samples. The sintered samples which resist most satisfactorily to irradiation consist of cold pressed high density and small grain size material for which the c/a ratio varies little with increasing dosage. The single crystal diagrams show the same classification as the polycrystalline material in respect with the c/a ratio. Furthermore, in addition to the Bragg reflections, X-ray diffusions are observed; the distribution of the defects is no longer isotropic; a description is given in particular of the scattering which occurs when 1.625 < c/a < 1.645. It appears that the defects start to congregate and cause pronounced distortion of the lattice. The defects are stabilized in the form of large aggregates only when a later irradiation stage is reached. (author) [French] Les diagrammes de rayons X obtenus a l'aide d'echantillons frittes de BeO irradies aux neutrons (E > 1 MeV) peuvent etre classes en trois types qui dependent de la valeur du rapport c/a, quelles que soient les caracteristiques du fritte (fritte sous charge ou fritte naturel, densite et taille de grains variables, BeO pur ou avec additions). La dilatation anisotrope de la maille de BeO observee par irradiation ne depend pas seulement de la dose recue, mais aussi des etats de contraintes intergranulaires des echantillons; ainsi les frittes qui resistent le mieux sous irradiation sont les frittes naturels a forte densite et a petits grains pour lesquels le rapport c/a varie peu en fonction de la dose d'irradiation. Les diagrammes de monocristaux presentent la

Influence de l\\'addition d\\'inhibiteurs azotés sur le comportement ...

African Journals Online (AJOL)

Influence de l\\'addition d\\'inhibiteurs azotés sur le comportement électrochimique et métallurgique de fontes au chrome-nickel (pompes d\\'extraction) en milieu ... en évidence l\\'existence d\\'un film très mince à la surface de la fonte Fa et d\\'une couche épaisse et poreuse de produits de corrosion à la surface de la fonte Fb.

Les tuméfactions sous mandibulaires: à propos de 42 cas et revue de la literature

Science.gov (United States)

Darouassi, Youssef; Mliha Touati, Mohamed; Chihani, Mehdi; Nadour, Karim; Ammar, Haddou; Bouaity, Brahim

2014-01-01

Les tuméfactions de la région sous mandibulaire sont une entité pathologique fréquente, caractérisées par un tableau clinique et une démarche diagnostique stéréotypée, et une unicité presque constante au plan chirurgical. Notre travail est une étude rétrospective sur une période de 5 an d'une série consécutive de 42 cas de tuméfactions sous mandibulaires qui ont été colligés au service d'oto-rhino-laryngologie et de chirurgie cervico-faciale de l'hôpital militaire Avicenne de Marrakech. L’âge moyen des patients était de 41 ans. Une prédominance masculine a été retrouvée. Le tableau clinique a été dominé par la tuméfaction sous mandibulaire. Tous les patients ont bénéficié d'une échographie cervicale. La tomodensitométrie cervicale a été réalisée chez 7 patients. La première étiologie était la sous maxillite chronique lithiasique dans 39,02% des cas. Le traitement était chirurgical dans tous les cas. En comparant les résultats avec ceux rapportés dans la littérature, nous allons discuter les différents aspects diagnostiques et thérapeutiques des étiologies les plus fréquentes. Les tuméfactions de la région sous mandibulaire sont fréquentes, nécessitant une démarche diagnostique rigoureuse et une prise en charge thérapeutique adaptée. PMID:25469195

Les effets potentiels du taping chez une population adulte souffrant d'un conflit sous-acromial

OpenAIRE

Roch, Sylvie; Thétaz, Alain; Balthazard, Pierre

2012-01-01

Introduction : Le conflit sous-acromial est une pathologie fréquente qui touche une grande partie de la population. Quelques revues de la littérature recommandent une prise en charge spécifique, mais peu d’études proposent le taping comme adjuvant aux traitements préconisés. Ainsi ce travail de bachelor a pour objectif de déterminer les effets potentiels du taping chez une population adulte souffrant de conflit sous-acromial. Méthodologie : Notre recherche d’études s’est effectuée de janvier ...

Thermal cycling behaviour and thermal stability of uranium-molybdenum alloys of low molybdenum content; Comportement au cyclage thermique et stabilite thermique des alliaces uranium-molybdene de faibles teneurs en molybdene

Energy Technology Data Exchange (ETDEWEB)

Decours, J; Fabrique, B; Peault, O [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-07-01

traitements de cyclage thermique ont ete faits a 550, 575, 600 et 625 deg C pendant 1000 cycles et les traitements de longues durees a 550, 575, 600 et 625 deg C pendant 2000 heures (4000 h a 625 deg C). L'alliage a 0,5 pour cent presente une bien meilleure tenue au cyclage thermique que l'uranium non-allie, toutefois ce comportement est nettement moins bon que celui des alliages de teneurs superieurs a 1 pour cent meme a 550 deg C; cette tenue s'ameliore par traitement thermique d'affinage du grain. A partir de l'alliage a 1,1 pour cent, la tenue au cyclage est tres bonne meme a 625 deg C et va en s'ameliorant jusqu'a 3 pour cent. Une montee de la temperature jusqu'a la phase {beta} a peu d'inconvenient a condition d'etre suivie d'un refroidissement rapide (50 a 100 deg /mn). Le grain {alpha} est fin, la phase {gamma} est sous forme nodulaire, et le comportement au cyclage thermique est bon. Si ce refroidissement est lent (15 deg /h), la grain {alpha} est grossier et le comportement au cyclage thermique est identique a celui de l'alliage a 0,5 pour cent. Les traitements de longue duree ont montre une bonne stabilite du grain {alpha} apres 2000 heures de maintien a 575, 600 et 625 deg C et apres 4000 heures a 625 deg C. Un cyclage thermique effectue apres ces traitements change tres peu le comportement au cyclage de ces alliages. (auteurs)

Etude du comportement de pieux forés, Partie I : Expérimentations in situ et en laboratoire

OpenAIRE

DAS NEVES, M; MESTAT, P; FRANK, R; DEGNY, E

2001-01-01

Cet article constitue la première partie d'une série de deux articles sur l'analyse du comportement de pieux forés à sec dans un sable argileux de la région de São Carlos, dans l'État de São Paulo (Brésil). Au total, six pieux de différents diamètres ont été exécutés pour mener trois essais de traction et trois essais de compression. Cette partie I décrit, d'une part, les aspects expérimentaux in situ et, d'autre part, les essais de laboratoire menés pour caractériser le comportement du sol d...

Effect of high energy electrons on the skin and on the underlying tissues of the rabbit. A clinical and histological study; Effets des electrons de haute energie sur la peau et les tissus sous-jacents du lapin. Etude clinique et histologique

Energy Technology Data Exchange (ETDEWEB)

Legeay, G; Vialettes, H; Adnet, J J; Court, L; Masse, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1967-07-01

The authors consider in this report the effects of high-energy electrons on rabbit teguments and on the underlying tissues after a single high dose irradiation. After briefly considering the mechanism of interaction between the electrons and matter as a function of their energy, the authors describe the dosimetry carried out, as a function of the irradiation device. The animal received surface doses of 5700 to 22100 rads in the thigh; the electron energy varied from 21 to 30 MeV. A clinical study was carried out over a period of nine months with a view to following the evolution of the damage and the functional degradation of the underlying tissues. A histological study of the induced damage was made after a second irradiation using 30 MeV electrons to produce doses of 16400 rads. Interesting observations were made concerning the damage caused to muscular and nerve tissues. (authors) [French] Les auteurs etudient, dans ce rapport, les effets des electrons de haute energie sur les teguments du lapin et les tissus sous-jacents apres une irradiation unique a dose elevee. Apres un rappel du mecanisme de l'interaction des electrons avec la matiere en fonction de leur energie, la dosimetrie realisee est exposee en fonction du dispositif d'irradiation. Les animaux ont recu, au niveau de la cuisse, des doses en surface de 5700 a 22100 rads; les energies des electrons vont de 21 a 30 MeV. Une etude clinique des lesions, observees pendant 9 mois, decrit leur evolution ainsi que les alterations fonctionnelles des tissus sous-jacents. Une etude histologique des lesions induites a ete realisee au cours d'une seconde experience pour des doses de 16400 rads avec des electrons de 30 MeV. D'interessantes observations ont ete faites concernant les lesions des tissus musculaires et nerveux. (auteurs)

Lipoblastome de la fosse sous temporale

Science.gov (United States)

Najib, Jaafar; Aniba, Khalid; Laghmari, Mehdi; Lmejjati, Mohammed; Ghannane, Houssine; Benali, Said Ait; Ennadam, Hind; Mrabti, Hind; Idrissi, Nadia Cherif

2014-01-01

Le lipoblastome est une tumeur bénigne rare, formée d'adypocytes immatures associés à la présence d'une matrice myxoide, de septas fibreux, et d'une architecture lobulaire. Il survient généralement chez le nourrisson et l'enfant. Cette tumeur touche dans la majorité des cas les tissus sous-cutanés des extrémités et du tronc. Elle est extrèmement rare au niveau de la tète et du cou. Un total de moins de 100 cas a été rapporté précédemment dans la littérature. PMID:25918563

La spirale dell’azzardo: una subcultura del gioco che “evapora” le relazioni / La spirale du jeu de hasard : une sous-culture qui empêche toute relation / The gambling: a subculture of game that “burns” the relationships

Directory of Open Access Journals (Sweden)

Molin Valentina

2011-07-01

neutralizzazione dei possibili rinforzi negativi che provengono invece dai “non-giocatori”.Dans cet article, l’auteur analyse les caractéristiques de ce qu’elle a appelé « sous-culture des jeux de hasard », décelable dans certains milieux de loisirs et dans les sous-groupes de joueurs particulièrement « acharnés ». Parmi ces formes de sous-culture, l’article va identifier les règles et les sanctions, les valeurs, les comportements durables, la caractérisation des relations et des interactions, en concluant que ce qui est construit dans l'espace du jeu est un univers séparé, une «réalité extérieure» dans laquelle des nouvelles règles sont écrites et où les valeurs changent par rapport au «monde extérieur» . Il a également été possible de conclure que l'adhésion à l' «univers du jeu» - l'internalisation de ses normes, le partage de ses valeurs, le développement des relations en son sein - est un facteur de maintenance de la conduite du jeu, car cette adhésion permet d'envisager comme «normal» son propre comportement grâce à des réactions positives provenant des compagnons de jeu et à la neutralisation d’éventuelles réactions négatives provenant des «non joueurs».

Observations sur le comportement alimentaire de la population de truites communes (Salmo trutta L. dans la rivière Estoräos, Portugal

Directory of Open Access Journals (Sweden)

VALENTE A.

1990-07-01

Full Text Available L'étude du comportement alimentaire d'une population de truites, Salmo trutta L., est abor-dée dans la rivière Estoräos, au nord du Portugal. L'étude des macroinvertébrés benthiques et en dérive montre une composition comparable à celle d'autres rivières européennes. La fréquence d'occurrence des organismes proies ingérés met en évidence la diversité du choix alimentaire, plus marquée chez les poissons 1+. Le comportement alimentaire opportuniste de l'espèce est confirmé. L'analyse en composantes principales révèle des similitudes entre le spectre trophique des deux groupes d'âge étudiés. Le comportement alimentaire ne semble pas responsable des faibles croissance et densité de cette population détruites.

Irradiation of UO{sub 2} sheathed in thick tubes effect of initial gap; Irradiation d'oxyde d'uranium en gaine resistante effet du jeu diametral initial sur le comportement global (programme CC-7: 1. et 2. tranches)

Energy Technology Data Exchange (ETDEWEB)

Janvier, J C; De Bernardy de Sigoyer, B.; Delmas, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-07-01

Sixteen fuel elements made of thick zircaloy tubes containing sintered UO{sub 2}, were irradiated to burn-ups of 3000 resp. 6000 MWd/t. The specific power was continuously measured for each element. The initial diametral clearance was either 0.31 mm (free thermal expansion) or 0.12 mm (thermal expansion stress). The examinations of irradiated fuel elements suggest that : - when the initial gap is high, the fuel expands until it comes in close contact to the sheath; the thermal resistance between fuel and sheath is higher than in the case the fuel is stressed. - a central hole and lenticular voids in movement toward the center by evaporation - condensation can be seen only in specimens having the highest initial gap. - some fission products are concentrated at a certain distance from the center, corresponding to bright rings {beta} autoradiography pictures; that event occurs only in large gap specimens. - fission gas release does not seem to be influenced by mechanical stresses applied to the fuel; the fraction released is coherent, in every, case, with the probable temperature distribution. (authors) [French] Seize cartouches d'oxyde d'uranium fritte a gaines tres epaisses de zircaloy ont ete irradiees dans des conditions de puissance calorifique mesurees continument. Pour huit de ces cartouches le jeu diametral initial entre UO{sub 2} et gaine etait de 0,31 mm et le combustible etait libre de se dilater; pour les huit autres 3 soumises aux memes conditions d'irradiation, le jeu initial etait de 0,12 mm, de sorte que le combustible se trouvait comprime par dilatation differentielle. Les taux de combustion etaient soit de 3000, soit de 6000 MWj/t. Les examens post-irradiatoires suggerent que; - lorsque la jeu initial est eleve, l'UO{sub 2} se dilate jusqu'a venir pratiquement en contact avec la gaine; la resistance thermique a l'interface est alors nettement plus grande que lorsqu'il y a compression mecanique. - la presence d'une cheminee centrale et l'existence de

Study of boron carbide evolution under neutron irradiation; Contribution a l'etude de l'evolution du carbure de bore sous irradiation neutronique

Energy Technology Data Exchange (ETDEWEB)

Simeone, D. [CEA/Saclay, Dept. de Mecanique et de Technologie (DMT), 91 - Gif-sur-Yvette (France)]|[Universite Blaise Pascal, Clermont-Ferrand II, (CNRS), 63 - Aubiere (France)

1999-07-01

Owing to its high neutron efficiency, boron carbide (B{sub 4}C) is used as a neutron absorber in control rods of nuclear plants. Its behaviour under irradiation has been extensively studied for many years. It now seems clear that brittleness of the material induced by the {sup 10}B(n,{alpha}){sup 7}Li capture reaction is due to penny shaped helium bubbles associated to a high strain field around them. However, no model explains the behaviour of the material under neutron irradiation. In order to build such a model, this work uses different techniques: nuclear microprobe X-ray diffraction profile analysis and Raman and Nuclear Magnetic Resonance Spectroscopy to present an evolution model of B{sub 4}C under neutron irradiation. The use of nuclear reactions produced by a nuclear microprobe such as the {sup 7}Li(p,p'{gamma}){sup 7}Li reaction, allows to measure lithium profile in B{sub 4}C pellets irradiated either in Pressurised Water Reactors or in Fast Breeder Reactors. Examining such profiles enables us to describe the migration of lithium atoms out of B{sub 4}C materials under neutron irradiation. The analysis of X-ray diffraction profiles of irradiated B{sub 4}C samples allows us to quantify the concentrations of helium bubbles as well as the strain fields around such bubbles.Furthermore Raman spectroscopy studies of different B{sub 4}C samples lead us to propose that under neutron irradiation. the CBC linear chain disappears. Such a vanishing of this CBC chain. validated by NMR analysis, may explain the penny shaped of helium bubbles inside irradiated B{sub 4}C. (author)

Utilisation des sous-produits agroalimentaires dans l’alimentation des poissons d’élevage en Côte d’Ivoire

Directory of Open Access Journals (Sweden)

Kimou Nestor B.

2016-03-01

Full Text Available Cette étude évalue l’impact de l’utilisation des sous-produits agroalimentaires dans l’alimentation des poissons d’élevage en Côte d’Ivoire. Une enquête a été réalisée en 2013 dans quinze principales zones piscicoles sur les caractéristiques technico-économiques des fermes, le profil socio-économique des promoteurs et les pratiques aquacoles, particulièrement l’alimentation des poissons. Les résultats révèlent que 71 % des pisciculteurs enquêtés utilisent des sous-produits agricoles durant au moins un stade de production. Parmi eux, 53 % utilisent exclusivement des sous-produits. Le son de riz (52 % et le mélange de sons de riz et de maïs (28 % sont les plus utilisés. Les prix moyens de ces sous-produits varient entre 20 et 105 FCFA/kg. Oreochromis niloticus et Heterotis niloticus sont les principales espèces élevées en polyculture sur les fermes. Les sous-produits sont utilisés en système semi-intensif, extensif et en rizipisciculture, en majorité en zone rurale. Les pisciculteurs sont pour la plupart des agriculteurs, âgés de plus de 40 ans. Les taux d’utilisation des sous-produits sont plus élevés dans les régions de l’Ouest, du Centre-Ouest et du Sud-Ouest de la Côte d’Ivoire, par rapport à celles du Sud et de l’Est. Les rendements des fermes sont relativement faibles (544 à 2445 kg/ha/an, avec des gains moyens quotidiens de 0,87 et 9,97 g/j pour le tilapia et l’heterotis respectivement. L’analyse des stratégies des acteurs suggère la nécessité de définir des mécanismes d’accompagnement et de financement de la pisciculture, afin que ces acteurs puissent améliorer les formulations alimentaires à partir des matières premières locales et accessibles.

Plate forme L3 informatique sous application android

OpenAIRE

BENDEDDOUCHE, Rida; BENAMARA, Mohammed El Amin

2014-01-01

Ce travail est présenté dans le cadre de notre projet de fin d’étude licence en informatique. Nous sommes actuellement dans une étape de transition de l’informatique fixe à l’informatique mobile. De jour en jour l’optimisation des smartphones ne cesse d’augmenter et cela grâce aux applications mobiles. Les smartphones utilisent plusieurs systèmes d’exploitation, une grande partie est sous Android. Les Smartphones et tablettes ont été conçus pour faciliter la vie quotidienne. En partant de ce ...

Determination of the Quality and Shelf Life of Sous Vide Cooked Turkey Cutlet Stored at 4 and 12ºC

Directory of Open Access Journals (Sweden)

IT Akoğlu

Full Text Available ABSTRACT The aim of this study was to determine the quality and shelf life of sous vide turkey cutlet stored at 4 and 12ºC. Samples were packaged under vacuum into polyamide-polypropylene pouches, cooked using sous vide technology (65ºC/40 min, chilled at 3ºC and stored at 4 and 12ºC for 5 weeks. Microbial (TMAB, lactic acid bacteria, Enterobacteriaceae, moulds and yeasts, Salmonella spp., L. monocytogenes, Cl. perfringens, physical-chemical (pH, water activity, TBARS, L*a*b* colour, texture profile analysis and shear force and sensory (appearance, colour, odour, flavour, juiciness, chewiness and acceptance parameters were determined. According to the results of mesophilic bacterial counts and sensory analysis, the shelf life of the sous vide turkey cutlet, cooked at 65ºC for 40 min, was determined as 28 days at 4ºC while 15 days at 12ºC. Salmonella spp., L. monocytogenes, Cl. perfringens were not detected in turkey cutlet samples during the storage period. It was detected that sous vide cooked provided convenient ready-to-eat foods and a long shelf life for turkey cutlet.

Change in physical and chemical characteristics related to the binomial time-temperature used in sous pasteurization see Tambaqui (Colossoma macropomum

Directory of Open Access Journals (Sweden)

H.C.A. Kato

2016-02-01

Full Text Available The goal of this study was to evaluate sous vide fish and assess the influence of time and temperature on the pasteurization process through quality parameters. The raw material (tambaqui fillets and the sous vide underwent physical, physicochemical, and microbiological analyses. A sauce was prepared containing soy sauce, water, horseradish and garlic flakes. The product's pasteurization parameters of time and temperature were defined according to a 22 central composite rotatable design (CCRD, and the dependent variables were water holding capacity (WHC and instrumental texture aiming at obtaining high WHC values for the product to maintain the desired juiciness. The microbiological analysis required by legislation have indicated that the fish fillets and sous vide were within de standard. The values of total coliforms found in the samples (fillets and sous vide analyzed were below the critical level of 10² CFU/g. The counts of sulphite-reducing clostridia and psychrotrophic and mesophilic bacteria on plates in the samples were <1x10 CFU/g. In conclusion, temperature was the most important factor in the pasteurization process, significantly contributing to the quality of the final product. The mathematical models proposed were considered predictive for each response.

Development of an apparatus for measuring the thermal conductivity of irradiated or non-irradiated graphite; Realisation d'un appareil de mesure de la conductibilite thermique du graphite irradie ou non irradie

Energy Technology Data Exchange (ETDEWEB)

Bocquet, M; Micaud, G

1962-07-01

An apparatus was developed for measuring the thermal conductivity coefficient K of irradiated or non-irradiated graphite. The measurement of K at around room temperature with an accuracy of about 6% is possible. The study specimen is placed in a vacuum between a hot and a cold source which create a temperature gradient {delta}{theta}/ {delta}x in the steady state. The amount of heat transferred, Q, is deduced from the electrical power dissipated at the hot source, after allowing for heat losses. The thermal conductivity coefficient is defined as: K = Q/S. {delta}x/{delta}{theta}, S being the cross section of the sample. Systematic studies have made it possible to determine the mean values of the thermal conductivity. (authors) [French] Un appareil de mesure du coefficient de conductibilite thermique K du graphite irradie ou non irradie a ete realise. Utilisant le principe du transfert de chaleur, il permet de mesurer K au voisinage de la temperature ambiante avec une precision de 6 pour cent environ. L'echantillon de graphite etudie est place sous vide entre une source chaude et une source froide qui creent en regime permanent un gradient de temperature {delta}{theta}/{delta}x La quantite de chaleur transferee Q est deduite de la puissance electrique dissipee dans la source chaude en deduisant les pertes thermiques. Le coefficient de conductibilite thermique est defini par: K = Q/S. {delta}x/{delta}{theta} S designant la section de l'echantillon. Des etudes systematiques ont permis de determiner pour differents graphites non irradies les valeurs moyennes des coefficients de conductibilite thermique. Ces etudes ont mis en evidence pour un type de graphite donne, l'influence de la densite apparente sur le coefficient de conductibilite thermique. A partir de mesures effectuees sur des echantillons de graphite irradies preleves par carottage dans les empilements des reacteurs a moderateur de graphite les variations du rapport K0/Ki en fonction de la dose et de la

Study of bond-energy variations in molecular systems under irradiation; Etude de la variation de l'energie de liaison dans les systemes moleculaires irradies

Energy Technology Data Exchange (ETDEWEB)

Naudet, G; Passe, S [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-07-01

On the basis of experimental results selected from publications, the evolution of the bond energy of a molecular system under irradiation - leading to a more or less bound state - is studied. This variation of bond energy is then compared to the total bond energy of the initial system and to the energy absorbed in the system during the irradiation. This is done as a function of the nature of molecular system and the radiation spectrum and intensity. Our working method will first be explained, and the results obtained will then be given. (authors) [French] A l'aide de resultats experimentaux, selectionnes dans les publications, nous etudions l'evolution de l'energie de liaison d'un systeme moleculaire sous irradiation (evolution vers un etat plus ou moins lie), et nous comparons cette variation d'energie de liaison a l'energie totale de liaison du systeme initial et a l'energie absorbee dans le systeme au cours de l'irradiation. Ceci est fait en fonction de la nature du systeme moleculaire ainsi que du spectre et de l'intensite du rayonnement. Nous exposons d'abord notre methode de travail, puis les resultats obtenus. (auteurs)

Fast neutron irradiation effects on diffusion processes in the aluminum-magnesium system; Effets de l'irradiation aux neutrons rapides sur les phenomenes lies a la diffusion dans le systeme aluminium-magnesium

Energy Technology Data Exchange (ETDEWEB)

Moreau, G [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1969-06-01

Examination of bulky diffusion couples Al (Mg) - Al and Mg (Al) - Mg handled in same thermal conditions (between 200 and 440 C) out of pile and under fast neutron irradiation show, in the latter case: 1 - An increase of the growth kinetics of {beta} phase which can be explained with KIDSON' s formula. 2 - An apparent increase of solubility caused by migration of a part of excess vacancies as complexes (vacancy - solute atom) to sinks (stacking faults, grain boundaries) or to sub-microscopical clusters. 3 - An enhancement of chemical diffusion at low temperature. At infinite dilution, chemical diffusion coefficient of Mg in Al can be expressed in normal conditions as: D = 1 exp(- 31000/RT {+-} 1200/RT cal/mole) cm{sup 2}.s{sup -1} and under irradiation as: D = 8.10{sup -3} exp(-24500/RT {+-} 1200/RT cal/mole) cm{sup 2}.s{sup -1}. Interpretation can be carried out by DIENES and Damask's theory. Excess defects (vacancies and interstitials generated in equal numbers by radiation) annihilate by migration to sinks and by direct recombination. Sinks density varies with temperature and irradiation time. The part of complexes (vacancy-solute atom) is important in the vacancies annealing kinetics. (author) [French] L'examen de couples de diffusion massifs Al (Mg) - Al et Mg (Al) - Mg traites dans les memes conditions thermiques (entre 200 et 440 C) hors pile et sous flux de neutrons rapides montre dans le dernier cas: 1 - Une acceleration de la cinetique de croissance de la phase {beta} a basse temperature dont on peut rendre compte a l'aide de la formule de KIDSON. 2 - Une augmentation apparente de la solubilite due a l'elimination d'une partie des lacunes en exces sous forme de complexes (lacune -solute) sur des pieges (dislocations, joints) ou sous forme d'amas sub-microscopiques. 3 - Une acceleration de la diffusion a basse temperature. A dilution infinie la diffusion (en cm{sup 2}/s) du Mg dans l'Al passe de: 1 exp(- 31000/RT {+-} 1200/RT cal/mole) a 8.10{sup -3} exp

Migration under irradiation of the I, Cs fission products in SiC; Migration sous irradiation des produits de fission I, Cs dans SiC

Energy Technology Data Exchange (ETDEWEB)

Benyagoub, A. [Paris-11 Univ., 91 - Orsay (France). Centre de Spectrometrie Nucleaire et de Spectrometrie de Masse; Centre Interdisciplinaire de Recherche Ions Lasers (CIRIL), 14 - Caen (France)

2007-07-01

This work is a part of the CEA-CNRS program on the behaviour of materials under irradiation. Its aim is to contribute to scientifically base the predicting methods of the behaviour of ceramic materials under irradiation in using the important development of calculation means. In particular, its role has been 1)to develop the basic knowledge and the interactions physics and 2)to elaborate calculation models at relevant scales. The studied topics are until now, the damage mechanisms, the diffusion under irradiation, the micro-structural evolutions and the incidences on the mechanical properties. (O.M.)

Compatibility of various magnesium alloys with pressurized carbon dioxide at high temperatures; Compatibilite de divers alliages de magnesium avec le gaz carbonique sous pression aux temperatures elevees

Energy Technology Data Exchange (ETDEWEB)

Dewanckel, B; David, R; Hulin, C; Leclercq, D [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

1968-07-01

This work on the compatibility of magnesium alloys with pressurized carbon dioxide has been carried out along three lines: - testing of special alloys containing additions of zirconium, manganese, cerium, zinc, beryllium and yttrium. The results are satisfactory, generally speaking, and the corrosion kinetics are often comparable to those of conventional magnesium-zirconium alloy; - influence of the quality of the carbon dioxide, in particular the presence of water vapour or of carbon monoxide in this gas. It appears that oxidation is reduced if the carbon dioxide contains traces of water vapour, but is more pronounced if carbon monoxide is also present; - study of certain phenomena related to corrosion: size changes in the samples during tests, structural modifications in the alloys (grain-size changes, formation of a cortical zone in the case of alloys containing zirconium). The influence of thermal cycling has also been studied in a few specific tests. The results obtained make it possible to compare the behaviour of various alloys under varying conditions of long-term use, and to choose, if required, the best composition for a given application. (authors) [French] Ce travail sur la compatibilite des alliages de magnesium avec le gaz carbonique sous pression a ete particulierement oriente dans trois directions: - epreuve, d'alliages speciaux comportant des additions de zirconium, manganese, cerium, zinc, beryllium et yttrium. Les resultats sont generalement satisfaisants et les cinetiques de corrosion souvent comparables a celles de l'alliage magnesium-zirconium classique; - influence de la qualite du gaz carbonique, et notamment de la presence de vapeur d'eau ou d'oxyde de carbone dans ce gaz. Il est apparu que l'oxydation est reduite si le gaz carbonique contient des traces d'eau, mais accrue si l'oxyde de carbone est egalement present; - etude de certains phenomenes lies a la corrosion: variations dimensionnelles des echantillons au cours des essais

Experimental approach and micro-mechanical modeling of the mechanical behavior of irradiated zirconium alloys; Approche experimentale et modelisation micromecanique du comportement des alliages de zirconium irradies

Energy Technology Data Exchange (ETDEWEB)

Onimus, F

2003-12-01

Zirconium alloys cladding tubes containing nuclear fuel of the Pressurized Water Reactors constitute the first safety barrier against the dissemination of radioactive elements. Thus, it is essential to predict the mechanical behavior of the material in-reactor conditions. This study aims, on the one hand, to identify and characterize the mechanisms of the plastic deformation of irradiated zirconium alloys and, on the other hand, to propose a micro-mechanical modeling based on these mechanisms. The experimental analysis shows that, for the irradiated material, the plastic deformation occurs by dislocation channeling. For transverse tensile test and internal pressure test this channeling occurs in the basal planes. However, for axial tensile test, the study revealed that the plastic deformation also occurs by channeling but in the prismatic and pyramidal planes. In addition, the study of the macroscopic mechanical behavior, compared to the deformation mechanisms observed by TEM, suggested that the internal stress is higher in the case of irradiated material than in the case of non-irradiated material, because of the very heterogeneous character of the plastic deformation. This analysis led to a coherent interpretation of the mechanical behavior of irradiated materials, in terms of deformation mechanisms. The mechanical behavior of irradiated materials was finally modeled by applying homogenization methods for heterogeneous materials. This model is able to reproduce adequately the mechanical behavior of the irradiated material, in agreement with the TEM observations. (author)

Une localisation exceptionnelle de la tuberculose vertébrale Mal de Pott sous-occipital

Science.gov (United States)

Yahyaoui, Sana; Majdoub, Senda; Zaghouani, Houneida; Fradj, Hosni Ben; Bakir, Dejla; Bouajina, Elyes; Kraiem, Chakib

2013-01-01

Le mal de Pott est la forme la plus commune de la tuberculose osseuse touchant essentiellement le rachis dorso-lombaire. La localisation sous-occipitale reste exceptionnelle. Le diagnostic de cette entité est le plus souvent tardif ce qui expose à des complications graves. Les radiographies standard ne sont parlantes qu’à un stade tardif de la maladie, d'où l'intérêt de l'imagerie moderne notamment la tomodensitométrie (TDM) et l'imagerie par résonance magnétique (IRM) qui permettent un diagnostic précoce. Nous rapportons un nouveau cas de tuberculose sous-occipitale. Le diagnostic était posé sur l'imagerie en coupe et confirmé histologiquement à la biopsie transorale. Sont rappelés les aspects en imagerie de cette localisation particulière du mal de Pott. PMID:23819005

The Co{sup 60} Irradiation Facility and the Gamma Field at Riso; Appareil d'irradiation au cobalt-60 et champ sous irradiation gamma, a Riso; Ustanovka dlya obluchenij, rabotayushchaya na So60, i pole gamma-luchej v rizo; Instalacion de irradiacion con cobalto-60 y campo de irradiacion gamma en el centro de Riso

Energy Technology Data Exchange (ETDEWEB)

Brynjolfsson, A; Holm, N W [Danish Atomic Energy Commission, Establishment Riso (Denmark)

1960-07-15

The paper describes both the Co{sup 60} irradiation facility and the gamma field at the Agricultural Department of the Research Establishment, Riso. The Co{sup 60} irradiation facility contains 1,800 curies of Co{sup 60.} Details of the construction are given together with the safety precautions which have been included in the design. Dosimetry has been carried out by four different methods: 1. Ionisation chambers, 2. Calorimetry, 3. Fricke dosimeter, 4. Photographic films. A general outline is given of the gamma field, including details of source position. The dose rate is approximately 100 r./hr. at a distance of 1 m. An area of radius 15 m is used for the growing of plants under irradiation. A brief indication is given of the class of products which have been irradiated in the two facilities. (author) [French] Le memoire decrit l'appareil d'irradiation au cobalt-60 et le champ sous irradiation gamma du Departement de l'agriculture de l'Organisme de recherche de Riso. L'appareil d'irradiation au cobalt-60 contient une source de 1 800 curies. Des details sont donnes sur la construction ainsi que sur les dispositifs de protection compris dans le plan. Quatre methodes differentes ont ete utilisees pour la dosimetrie: 1. Chambres d'ionisation 2. Calorimetrie 3. Dosimetrie de Fricke 4. Pellicules photographique s On donne un apercu general du champ gamma, ainsi que des details sur la position de la source. L'intensite de dose est de 100 R/h environ a une distance de 1 m. Une zone d'un rayon de 15 m est utilisee pour la croissance des plantes soumises a l'irradiation. Des indications sommaires sont donnees sur la categorie des produits qui ont ete soumis a l'irradiation dans les deux installations. (author) [Spanish] Los autores describen la instalacion de irradiacion con cobalto-60 y el campo de irradiacion gamma del Departamento de Agronomia del Instituto de Investigaciones de Riso. El dispositivo de irradiacion consiste en una fuente de cobalto-60 de 1 800 curies

statut de la matiere organique des cambisols et des lixisols sous

African Journals Online (AJOL)

Administrateur

L'étude vise à évaluer la matière organique des Cambisols et des Lixisols sous formations naturelles de longue durée en zone climatique nord-soudanienne et à établir, les relations entre ... sont supérieures à celles des sols des zones sahélienne et sud-soudanienne. ... globale a eu une corrélation positive avec le pH.

Changes provoked by boiling, steaming and sous-vide cooking in the lipid and volatile profile of European sea bass.

Science.gov (United States)

Nieva-Echevarría, Bárbara; Manzanos, María J; Goicoechea, Encarnación; Guillén, María D

2017-09-01

This study aims to shed light on the changes provoked by boiling, steaming and sous-vide cooking on the lipids and volatile profile of farmed and wild European sea bass meat. None of the cooking techniques provoked changes due to hydrolytic or oxidation processes detectable by 1 H NMR on sea bass lipids. The lipid profile of main and minor lipidic components was maintained after cooking. However, study by SPME-GC/MS evidenced that steaming and sous-vide cooking modified the volatile profile of sea bass meat, especially in farmed specimens. The compounds generated came from the occurrence, to a very small extent, of lipid and protein degradation. By contrast, boiling scarcely modified the initial characteristics of raw sea bass. Thus, from a sensory point of view and considering the odour-active compounds generated, steaming and sous-vide cooking provoked more noticeable changes than boiling, especially in farmed sea bass meat. Copyright © 2017. Published by Elsevier Ltd.

Integral modeling and financial impact of the geothermal situation and power plant at Soultz-sous-Forets

International Nuclear Information System (INIS)

Heidinger, Ph.

2010-01-01

The science about deep Enhanced Geothermal Systems (EGS) is still an emerging process and for further spreading economics is the key of the technology. To understand the financial situation, a program for economic evaluation was developed. This software (Euronaut) is completely modularized and considers all cash flows. Projects like an EGS are wrapped into tree-like structures. Based on the results which were gained at Soultz-sous-Forets, two configurations were designed. The first EGS configuration consists of a simplified two well (doublet) system where the dependencies of all components (mainly the reservoir, wells, pumps and the heat-to-power conversion unit) are physically and economically linked together. The realization of these dependencies and their complex interactions enable a sensitivity analysis of the borehole depth and reservoir depth, respectively. As a result, depth dependent effective costs and revenues of an EGS plant with the geohydrological characteristics of Soultz-sous-Forets are determined. As a future development, the second configuration will adapt the actual situation at Soultz-sous-Forets with the individual features of all four wells (GPK1 - GPK4). Then, this model can be used for all kinds of sensitivity analyses to clarify the impact of certain components or to optimize the operation scheme; e.g. the flow rates. (author)

Behaviour of high purity UO{sub 2}/H{sub 2}O interfaces under helium beam irradiation in deaerated conditions; Comportement des interfaces UO{sub 2}/H{sub 2}O de haute purete sous faisceau d'ions He{sup 2+} en milieu desaere

Energy Technology Data Exchange (ETDEWEB)

Mendes, E

2005-11-15

A question put within the framework of the nuclear fuel storage worn in geological site is what become to them in the presence of water. The aim of a fundamental program, of PRECCI project (ECA), is to highlight the behaviour of interfaces which can be used as models for the interfaces nuclear spent fuel/water if the fuel is uranium UO{sub 2} dioxide. This doctorate is interested in the effect of the alpha activity which is the only one that exist in the spent fuel after long periods. The aim is to identify the mechanisms of alteration and of leaching of surfaces under alpha irradiation. A method is developed to irradiate UO{sub 2}/H{sub 2}O interfaces in deaerated conditions with the beam of He{sup 2+} produced by a cyclotron. The He{sup 2+} ions cross an UO{sub 2} disc and emerge in water with an energy of 5 MeV. Leachings under irradiation are carried with a large range of particles flux. The post-irradiation characterization of the surface of the discs realised by micro-Raman spectroscopy allowed to identify the alteration layer. It is made up of studtite UO{sub 2}(O{sub 2}),4H{sub 2}O, and of schoepite UO{sub 3},xH{sub 2}O. The analysis of the solutions shows that the uranium release strongly increases. The electrochemical properties of the interfaces under irradiation strongly differ from those before irradiation. This work allows to propose that the radiolytic species seen by the interface are it during the heterogeneous phase of evolution of the traces and are species of short lives. Modeling show that the radiolytic radicals species can migrate toward the interface and react with the UO{sub 2} surface. (author)

Fission product determination in irradiated fuel processing waste (electrophoresis); Dosage des produits de fission dans les effluents de traitement des combustibles irradies (electrophorese)

Energy Technology Data Exchange (ETDEWEB)

Auchapt, J M; Tret, J [Commissariat a l' Energie Atomique, Centre de Marcoule, 30 - Bagnols-sur-Ceze (France). Centre de Production de Plutonium de Marcoule. Services d' Extraction du Plutonium

1966-07-01

This dosage method concerns fission products present in the waste produced from the processing of cooled irradiated fuels. - Sr, Cs, Ce, Y, Ru by quantitative analysis; - Zr, Nb by qualitative analysis. It includes electrophoresis on paper strips one meter long which is then analysed between two window-less Geiger counters. For an activity of 10{sup -2} {mu}Ci of any cation in a 10 {mu}l spot, the standard error {sigma} if 3 to 4 per cent. complete analysis lasts about 5 hours. (authors) [French] Cette methode de dosage concerne les produits de fission presents dans les effluents de traitement des combustibles irradies refroidis: - Sr, Cs, Ce, Y, Ru en analyse quantitative; - Zr, Nb en analyse qualitative. Elle comporte une electrophorese sur bande de papier de un metre de longueur suivie d'un depouillement entre deux compteurs Geiger sans fenetre. Pour une activite de 10{sup -2} {mu}Ci d'un cation quelconque dans une tache de 10 {mu}l l'erreur standard {sigma} est de 3 a 4 pour cent. L'analyse complete demande environ 5 heures. (auteurs)

Comportement d'un béton à hautes performances à base de laitier ...

African Journals Online (AJOL)

L'utilisation de béton à hautes performances (BHP) intégrant des ajouts cimentaires comme les cendres volantes, les fumées de silice ou le laitier hydraulique ... armatures qui sont, à leur tour attaquées. Il est possible de modifier la ... refroidissement brutal par l'eau sous pression, c'est un sable de granulométrie 0/5 mm.

A study of point defects created by electron irradiation of dilute iron-carbon alloys; Etude des defauts crees par irradiation electronique dans les alliages de fer carbone dilues

Energy Technology Data Exchange (ETDEWEB)

Leveque, J L [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-10-01

Resistivity and magnetic after effect (m.a.e.) measurements are used to study the influence of carbon atoms on the annealing process of point defects created by electron irradiation (3 MeV) at low temperature (20 deg. K). The presence of the carbon atoms has a strong influence on the recovery sub-stage I{sub E} and stage III. For the former, the carbon impurity traps the freely migrating iron interstitial. For the latter the effect is interpreted as being due to formation during annealing, of a carbon vacancy pair. A pronounced m.a.e. band is attributed to the reorientation of this carbon vacancy complex. All these results are coherent with the interpretation of a low temperature migrating free interstitial. (author) [French] L'influence des atomes de carbone sur le recuit des defauts ponctuels crees par irradiation electronique (3 MeV) a basse temperature (20 deg. K) dans le fer est mise en evidence par des mesures de resistivite electrique, et de trainage magnetique. Cette influence se manifeste principalement au cours du sous stade I{sub E} et du stade III de resistivite. Au sous stade I{sub E} les atomes de carbone piegeraient les interstitiels libres de fer au cours de leur migration. Le stade III est interprete comme etant du a la recombinaison du carbone dans les lacunes. Une importante bande de tramage magnetique etant attribuee a la reorientation de ce complexe. Ces resultats sont coherents avec l'interpretation faisant migrer a basse temperature l'interstitiel libre. (auteur)

Modélisation du comportement et des couplages HMC des milieux poreux

OpenAIRE

Hoang , Ha

2012-01-01

Modelling of the behavior and the couplings HMC of the porous circles; La modélisation du comportement hydromécanique chimique des milieux poreux saturés et non saturés est abordée au niveau microscopique et mésoscopique. Au niveau microscopique la modélisation des écoulements diphasiques est basée sur une représentation du réseau poral comme un ensemble de tubes dont les orientations et les rayons sont choisis sur un principe d’équivalence avec les pores. L’algorithme régissant la génération...

Scintigraphy of the Pericerebral Subarachnoidspaces; Scintigraphie des Espaces Sous-Arachnoidiens Pericerebraux

Energy Technology Data Exchange (ETDEWEB)

Oberson, R.; Martini, T. [Institut Universitaire de Radiologie Medicale, Hopital Cantonal, Lausanne (Switzerland)

1969-05-15

-auricular shunt of the C.S.F. in cases of symptomatic hydrocephalus of traumatic or occult origin in adult or child patients. The study was based on an analysis of over 100 scintigrams of the pericerebral subarachnoid cavities. From this, the authors were gradually able to work out the normal and pathological symptomatology of this field, from the point of view of both cisternal morphology and fluid hydrodynamics. (author) [French] L'exploration des espaces sous-arachnoiediens pericerebraux par les radioisotopes (cisternographie radioisotopique ou 'RISA- cisternography' ) prend une place de plus en plus importante parmi les techniques neuroradioisotopiques de diagnostic. Elle fournit de precieux renseignements sur la permeabilite des espaces sous-arachnoiediens et sur la dynamique du liquide cephalo-rachidien (LCR). On doit actuellement la considerer comme indispensable et irremplacable dans le diagnostic de certaines affections neurologiques, tout comme la gamma-encephalographie et les techniques neuroradiologiques plus classiques (angiographie et pneumographie cerebrales). En effet, cet examen est seul a preciser l'aspect morphologique global des espaces sous-arachnoiediens pericerebraux; tout en renseignant sur la permeabilite des citernes pericerebrales et des sillons de la convexite, il fournit une image scintigraphique typique et symetrique, facile a observer, de face et de profil, des voies principales de circulation du LCR cisternal. L'image scintigraphique d'une citerne indique qu'elle est permeable et que l'espace sous-jacent l'est aussi. Du point de vue dynamique, la cisternographie radioisotopique, outre la demonstration par voie scintigraphique de la permeabilite des citernes, met en evidence le schema normal ou pathologique de la dynamique du LCR. Le schema normal de progression du LCR est actuellement bien etabli. Il est du plus haut interet de le connaitre afin de distinguer deja quelques syndromes pathologiques: la presence d'une fistule de LCR (la

Etude du comportement de deux variétés de manioc en culture in ...

African Journals Online (AJOL)

Les techniques de multiplication peu améliorées du manioc associées aux problèmes de maladies bactériennes et virales participent à la régression de son rendement. Le but de cette étude est d'analyser le comportement de deux variétés de manioc en culture in vitro puis l'impact de cette technique sur la qualité de l'ADN ...

Les particules illocutoires, variable d’ajustement de la traduction sous-titrante au cinéma

Directory of Open Access Journals (Sweden)

Ève Vayssière

2010-12-01

Full Text Available Die illokutiven Partikel fungieren als Anpassungsvariable, die beim Übersetzungsakt zur Untertitelung von Filmen entweder weggelassen werden oder erscheinen. Wenn sie einfach gelöscht werden, ergeben sich weder grammatikalische Störungen noch Informationsverlust. Das Auftauchen dieser Partikel in den deutschen Untertiteln zeigt jedoch, wie wichtig sie sind: Als Partikel der Oralität tragen sie zur Idiomatizität bei.Les particules illocutoires sont des variables d’ajustement lors de l’acte de traduction sous-titrante au cinéma, elles peuvent être supprimées sans que cela occasionne de dysfonctionnement grammatical et elles disparaissent lors de la traduction en français sans que cela occasionne une perte d’informations. Leur apparition dans les sous-titres allemands montre néanmoins leur importance : particules de l’oralité, elles sont vecteur d’« idiomaticité ».

Irradiation effects and behaviour of fission products in zirconia and spinel; Effets d'irradiation et comportement des produits de fission dans la zircone et le spinelle

Energy Technology Data Exchange (ETDEWEB)

Gentils, A

2003-10-01

Crystalline oxides, such as zirconia (ZrO{sub 2}) and spinel (MgAl{sub 2}O{sub 4}), are promising inert matrices for the transmutation of plutonium and minor actinides. This work deals with the study of the physico-chemical properties of these matrices, more specifically their behaviour under irradiation and their capacity to retain fission products. Irradiations at low energy and incorporation of stable analogs of fission products (Cs, I, Xe) into yttria-stabilized zirconia and magnesium-aluminate spinel single crystals were performed by using the ion implanter IRMA (CSNSM-Orsay). Irradiations at high energy were made on several heavy ion accelerators (GANIL-Caen, ISL-Berlin, HIL-Warsaw). The damage induced by irradiation and the release of fission products were monitored by in situ Rutherford Backscattering Spectrometry experiments. Transmission electron microscopy was also used in order to determine the nature of the damage induced by irradiation. The results show that irradiation of ZrO{sub 2} and MgAl{sub 2}O{sub 4} with heavy ions (about hundred keV and about hundred MeV) induces a huge structural damage in crystalline matrices. Total disorder (amorphization) is however never reached in zirconia, contrary to what is observed in the case of spinel. The results also emphasize the essential role played by the concentration of implanted species on their retention capacity. A dramatic release of fission products was observed when the concentration exceeds a threshold of a few atomic percent. Irradiation of implanted samples with medium-energy noble-gas ions leads to an enhancement of the fission product release. The exfoliation of spinel crystals implanted at high concentration of Cs ions is observed after a thermal treatment at high temperature. (author)

Thermograms of the combined High Hydrostatic Pressure and Sous-vide treated Longissimus dorsi of pork

Science.gov (United States)

Kenesei, Gy; Jónás, G.; Salamon, B.; Dalmadi, I.

2017-10-01

In this work, slices of Longissimus dorsi of pork was used as raw material to establish the effects of the sous-vide technology and the high hydrostatic pressure treatments (and their combinations) on meat. The state of the proteins in meat has a very important effect on several quality parameters of the product, such as weight loss, water holding capacity, organoleptic properties. Therefore it is important to follow and analyse the denaturation of the protein content during food processing. The samples were cooked sous-vide (60 °C, 5-480 minutes) or pressurized (100-600 MPa, 5 minutes, room temperature). Also two steps treatments were studied combining both technologies, applying high hydrostatic pressure treatment (300 or 600 MPa, 5 minutes, room temperature) after or previous to sous-vide cooking (60 °C, 30 minutes). The changes in the condition of meat proteins were followed by a differential scanning calorimeter. The DSC curves were analysed using the unit’s own software where denaturation heat was determined. Thermograms show through the change of the sample’s protein state the dissimilar effect of the treatments. Using the Polar Qualification System -previously proved to be effective with NIR measurements- the spectral information was reduced to a two dimensional polar co-ordinate system where each DSC curve is represented by a “quality point”. As a new experiment the applied PQS data reduction method compared to the traditional thermal analysis data processing gave us less information on the differences of our samples although the results are promising as we were able to detect the same trends and characteristics.

Profil lipidique des personnes vivant avec le VIH sous antirétroviral ...

African Journals Online (AJOL)

Au regard des connaissances actuelles, aucune étude n'est disponible au Bénin sur le profil lipidique des personnes vivant avec le VIH. L'objectif de la présente étude est de décrire le profil lipidique des personnes vivant avec le VIH sous antirétroviral suivies au CHU-O/P de Porto-Novo. Il s'est agi d'une étude ...

A reforma da previdência em dois tempos

Directory of Open Access Journals (Sweden)

Carlos Ranulfo Melo

2005-06-01

Full Text Available Dans cet article, on analyse la réforme de la Sécurité Sociale brésilienne sous les gouvernements de Fernando Henrique et de Lula. Après avoir établi une comparaison entre les contextes où ont été avancées les différentes PECs (Propositions d'Amendement Constitutionnel et le comportement des parlementaires à ces deux moments, on soutient qu'un changement de type contextuel, c'est-à-dire l'inversion entre majorité et opposition, en modifiant la distribution des préférences et des moyens entre les acteurs et en bouleversant la majorité dans les diverses arènes où se déroulait le jeu politique, a contribué pour que, en somme, le programme réformiste progresse davantage sous le gouvernement du président Lula.

Mise au point du rheometre a cisaillement annulaire pour l'etude de rheologie d'un mastic bitumineux avec verre incorpore =

Science.gov (United States)

El Mansouri, Souleimane

Dans le domaine viscoelastique lineaire (VEL, domaine des petites deformations), le comportement thermomecanique du bitume et du mastic bitumineux (melange uniforme de bitume et de fillers) a ete caracterise au Laboratoire des Chaussees et Materiaux Bitumineux (LCMB) de l'Ecole de technologie superieure (ETS) avec l'appui de nos partenaires externes : la Societe des Alcools du Quebec (SAQ) et Eco Entreprises Quebec (EEQ). Les proprietes rheologiques des bitumes et des mastics ont ete mesurees grâce a un nouvel outil d'investigation appele, Rheometre a Cisaillement Annulaire (RCA), sous differentes conditions de chargement. Cet appareil permet non seulement de solliciter des eprouvettes de tailles importantes par rapport a celles utilisees lors des essais classiques, mais aussi d'effectuer des essais en conditions quasi-homogenes, ce qui permet de donner acces a la loi de comportement des materiaux. Les essais sont realises sur une large gamme de temperatures et de frequences (de -15 °C a 45°C et de 0,03Hz a 10 Hz). Cette etude a ete menee principalement pour comparer le comportement d'un bitume avec celui d'un mastic bitumineux dans le domaine des petites deformations. neanmoins, dans une seconde perspective, on s'interesse a l'influence des fillers de verre de post-consommation sur le comportement d'un mastic a faibles niveaux de deformations en comparant l'evolution des modules complexes de cisaillements (G*) d'un mastic avec fillers de verre et un mastic avec fillers conventionnels (calcaire). Enfin, le modele analogique 2S2P1D est utilise pour simuler le comportement viscoelastique lineaire des bitumes et des mastics bitumineux testes lors de la campagne experimentale.

Panel surveys

OpenAIRE

MADRE, JL; ZUMKELLER, D; CHLOND, B; ARMOOGUM, J

2004-01-01

l'analyse du comportement humain constitue un enjeu important dans le domaine des transports, lequel se transforme radicalement sous la pression des évolutions économique, écologique et démographique. les premières grandes études ont commence il y a plus d'une dizaine d'années : parc auto sofres en france, puget sound panel a seattle. cet article fait le bilan de ces expériences et met en évidence les principaux problèmes méthodologiques rencontres tout en proposant de nouvelles directions d'...

Etude expérimentale sur le comportement d’un nouveau type d’accumulateur d’énergie thermique. Déterminations préliminaires sur l’installation expérimentale

Directory of Open Access Journals (Sweden)

Valentin Pavel

2004-01-01

Full Text Available On présente la première partie d’une étude concernant le comportement d’un nouveau type d’accumulateur d’énergie thermique. Sont présentées les déterminations se référant au comportement de l’unité centrale de stockage dans la phase de relaxation (refroidissement libre afin d’établir les pertes de chaleur, pour avoir une approche correcte des phénomènes dans les étapes ultérieures des études concernant l’accumulateur.

Probabilistic methods for the simulation of fuel particles behavior under irradiation; Apport des methodes probabilistes dans la simulation du comportement sous irradiation du combustible a particules

Energy Technology Data Exchange (ETDEWEB)

Cannamela, C

2007-09-15

This work is devoted to the evaluation of mathematical expectations in the context of structural reliability. We seek a failure probability estimate (that we assume low), taking into account the uncertainty of influential parameters of the System. Our goal is to reach a good compromise between the accuracy of the estimate and the associated computational cost. This approach is used to estimate the failure probability of fuel particles from a HTR-type nuclear reactor. This estimate is obtain by means of costly numerical simulations. We consider different probabilistic methods to tackle the problem. First, we consider a variance reducing Monte Carlo method: importance sampling. For the parametric case, we propose adaptive algorithms in order to build a series of probability densities that will eventually converge to optimal importance density. We then present several estimates of the mathematical expectation based on this series of densities. Next, we consider a multi-level method using Monte Carlo Markov Chain algorithm. Finally, we turn our attention to the related problem of quantile estimation (non extreme) of physical output from a large-scale numerical code. We propose a controlled stratification method. The random input parameters are sampled in specific regions obtained from surrogate of the response. The estimation of the quantile is then computed from this sample. (author)

Leuconostoc rapi sp. nov., isolated from sous-vide cooked rutabaga

DEFF Research Database (Denmark)

Lyhs, Ulrike; Snauwaert, I.; Pihlajaviita, S.

2015-01-01

A Gram-positive, ovoid lactic acid bacterium, strain LMG 27676T, was isolated from a spoiled sous-vide cooked rutabaga. 16S rRNA gene sequence analysis indicated that the novel strain belongs to the genus Leuconostoc, with Leuconostoc kimchi and Leuconostoc miyukkimchii as nearest neighbours (99.......1 and 98.8% 16S rRNA gene sequence similarity towards the type strain, respectively). Phylogenetic analysis of the 16S rRNA gene, multilocus sequence analysis of the pheS, rpoA and atpA genes, and biochemical and genotypic characteristics allowed to differentiate strain LMG 27676T from all established...

Stability under irradiation of a fine dispersion of oxides in a ferritic matrix; Stabilite sous irradiation de particules d'oxydes finement dispersees dans des alliages ferritiques

Energy Technology Data Exchange (ETDEWEB)

Monnet, I

1999-07-01

Oxide dispersion strengthened (ODS) ferritic-martensitic steels are being considered for high temperature, high fluence nuclear applications, like fuel pin cladding in Fast Breeder Reactors. ODS alloys offer improved out of pile strength characteristics at temperature above 550 deg.C and ferritic-martensitic matrix is highly swelling resistant. A clad in an ODS ferritic steel, call DY (Fe-13Cr-1,5Mo+TiO{sub 2}+Y{sub 2}O{sub 3}) has been irradiated in the experimental reactor Phenix. Under irradiation oxide dissolution occurs. Microstructural observations indicated that oxide evolution is correlated with the dose and consist in four phenomena: the interfaces of oxide particles with the matrix become irregular, the uniform distribution of the finest oxide (< 20 nm) disappear, the modification of oxide composition, and a halo of fine oxides appear around the larger oxides. The use of such a material requires a study of oxide stability under irradiation, since the oxide particles provide the desired mechanical properties. The study is based on two types of alloys, the DY and four ferritic steels Fe-9Cr-1Mo reinforced by Al{sub 2}O{sub 3}, Y{sub 2}O{sub 3}, MgO or MgAl{sub 2}O{sub 4}. These materials were irradiated with charged particles in order to gain a better understanding of the mechanisms of dissolution. Irradiation with 1 MeV Helium does not induce any modification, neither in the chemical modification of the particles nor in their spatial and size distribution. Since most of the energy of helium ions is lost by inelastic interaction, this result proves that this kind of interaction does not induce oxide dissolution. Irradiation with 1 MeV or 1.2 MeV electrons leads to a significant dissolution with a radius decrease proportional to the dose. These experiments prove that oxide dissolution can be induced by Frenkel pairs alone, provided that metallic atoms are displaced. The comparison between irradiation with ions (displacements cascades) and electrons (Frenkel

Pollution urbaine : la France sous le dôme

OpenAIRE

Laurent, Eloi

2017-01-01

Un an exactement après avoir accueilli la COP21, Paris suffoquait début décembre sous un dôme de pollution, mais aussi Lyon, Villeurbanne, Marseille, Avignon, Rouen ou Grenoble. Airparif, qui a relevé un niveau de particules fines de 146 µg/m3 à Paris en moyenne pour le 1er décembre, précisait dans un communiqué qu’il s’agissait là d’un des pics hivernaux de pollution les plus sévères de ces dix dernières années, les précédents remontant à janvier 2009 et décembre 2007.

Vacuum brazing of metals (1961); Brassure sous vide des metaux (1961)

Energy Technology Data Exchange (ETDEWEB)

Lapujoulade, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1961-07-01

We have studied brazing in vacuum aiming its application for the making of containers and apparatus meant for high vacuum (p < 10{sup -8} torr). We first define the wettability of a brazing alloy on a metal and we remind the influence of the various parameters which act on this wettability (nature of the solid, of the liquid, geometrical and physicochemical state of the surface, metallurgical reactions occurring at the interface, temperature, time). We give then the results of the tests carried out in order to determine the conditions of wettability in vacuum of some brazing alloys on metals which can be used for the above mentioned apparatus (stainless steel, aluminium, bronze, titanium, zirconium, kovar, nickel, copper). (author) [French] Nous avons etudie la brasure sous vide en vue de son application a la construction d'enceintes et apparelilage destines a l'obtention des vides eleves (p < 10{sup -8} torr). Nous definissons d'abord la mouillabilite d'une brasure sur un metal et nous rappelons l'influence des differents parametres qui agissent sur cette mouillabilite (nature du solide, du liquide, etat geometrique et physico-chimique de la surface, reactions metallurgiques a l'interface, temperature, temps). Nous donnons ensuite les resultats des essais effectues dans le but de determiner les conditions de mouillabilite sous vide de certaines brassures sur des metaux utilisables dans les constructions mentionnees ci-dessus (acier inoxydable, bronze d'aluminium, titane, zirconium, kovar, nickel, cuivre). (auteur)

Traduction audiovisuelle : quand le sous-titrage à destination des personnes sourdes et malentendantes se rencontrent dans le film "Le Prénom"

OpenAIRE

Horii, Anaïk

2015-01-01

La traduction audiovisuelle est riche en méthodes de traduction : doublage, voice over, sur-titrage, audiodescription, etc. Ce mémoire se concentre sur la méthode du sous-titrage ainsi que sur celle du sous-titrage à destination des personnes sourdes et malentendantes. Le but était de comparer ces deux méthodes de traduction interlinguistique (dans les deux cas pour un public germanophone) en s'attardant sur les références culturelles ainsi que sur les langages populaire, familier et argotiqu...

Raconter l’Histoire (sous la direction de Prstojevic A.

Directory of Open Access Journals (Sweden)

Sophie Thiriar

2011-10-01

Full Text Available Sous le titre Raconter l’Histoire, Alexandre Prstojevic a réuni treize articles, faisant suite à deux colloques qui ont eu lieu à Paris en mai 2006 et à Montréal en octobre de la même année. Treize pointures du monde slave se sont intéressées pour l’occasion à la représentation littéraire et cinématographique de l’histoire – principalement celle de l’Europe centrale et orientale – après le spectacle mortifère des deux guerres mondiales. Suite aux multiples expériences déshumanisantes dont est...

Experimental approach and micro-mechanical modeling of the creep behavior of irradiated zirconium alloys; Approche experimentale et modelisation micromecanique du comportement en fluage des alliages de zircomium irradies

Energy Technology Data Exchange (ETDEWEB)

Ribis, J

2007-12-15

The fuel rod cladding, strongly affected by microstructural changes due to irradiation such as high density of dislocation loops, is strained by the end-of-life fuel rod internal pressure and the potential release of fission gases and helium during dry storage. Within the temperature range that is expected during dry interim storage, cladding undergoes long term creep under over-pressure. So, in order to have a predictive approach of the behavior of zirconium alloys cladding in dry storage conditions it is essential to take into account: initial dislocation loops, thermal annealing of loops and creep straining due to over pressure. Specific experiments and modelling for irradiated samples have been developed to improve our knowledge in that field. A Zr-1%Nb-O alloy was studied using fine microstructural investigations and mechanical testing. The observations conducted by transmission electron microscopy show that the high density of loops disappears during a heat treatment. The loop size becomes higher and higher while their density falls. The microhardness tests reveal that the fall of loop density leads to the softening of the irradiated material. During a creep test, both temperature and applied stress are responsible of the disappearance of loops. The loops could be swept by the activation of the basal slip system while the prism slip system is inhibited. Once deprived of loops, the creep properties of the irradiated materials are closed to the non irradiated state, a result whose consequence is a sudden acceleration of the creep rate. Finally, a micro-mechanical modeling based on microscopic deformation mechanisms taking into account experimental dislocation loop analyses and creep test, was used for a predictive approach by constructing a deformation mechanism map of the creep behavior of the irradiated material. (author)

Long-time water level observations at the HDR-testsite Soultz-sous-Forets

Energy Technology Data Exchange (ETDEWEB)

Dornstaedter, J; Heinemann-Glutsch, B; Zaske, J [GTC-Kappelmeyer GmbH, Karlsruhe (Germany)

1997-12-01

Pressure or water level measurements have been performed by GTC in different wells at the geothermal testsite Soultz-sous-Forets for six years now. The water lever variations are mainly influenced by earth tides, barometric pressure variations, hydraulic testing and stimulation. The small scale variations are influenced by tidal and barometric forcing functions, the large scale variations by hydraulic testing and stimulation. By analyzing such measurements it is possible to get important information about the hydrualic connections between the boreholes, as well as aquifer parameters. (orig./AKF)

Fabrication, characterization and radiation damage stability of hollandite based ceramics devoted to radioactive immobilisation; Synthese, caracterisation et etude du comportement sous irradiation electronique de matrices de type hollandite destinees au confinement du cesium radioactif

Energy Technology Data Exchange (ETDEWEB)

Aubin-Chevaldonnet, V. [CEA Valrho, Dir. de l' Energie Nucleaire (DEN/DETCD/SCDV), Dept. d' Etudes du Traitement et du Conditionnement des Dechets, Service de Conditionnement des Dechets et Vitrification, 30 - Marcoule (France)

2004-11-01

Research on treating specifically the long-lived and high level nuclear wastes, notably cesium, is currently carried out in France. Cesium immobilization in host matrices of high chemical durability constitutes the favoured option. Hollandite matrix is a good candidate because of its high cesium incorporation ability and its excellent chemical stability. During this study, different compositions of hollandite ceramics Ba{sub x}Cs{sub y}C{sub z}Ti{sub 8-z}O{sub 16} (C = Al{sup 3+}, Cr{sup 3+}, Ga{sup 3+}, Fe{sup 3+}, Mg{sup 2+}, Sc{sup 3+}), synthesized by oxide route, were characterized in terms of structure, microstructure and physical and chemical properties. Iron ions seems to be the most suitable of the studied C cations to get high-performance hollandites. The stability of these ceramics under external electron irradiation, simulating the {beta} particles emitted by radioactive cesium, were also estimated, at the macroscopic and atomic scale. The point defects creation and their thermal stability were followed by electron paramagnetic resonance. (author)

Introduction

Directory of Open Access Journals (Sweden)

Muriel Verbeeck-Boutin

2010-11-01

Full Text Available Version françaiseCe numéro hors série de plus de quatre cents pages, comportant une trentaine de contributions de jeunes diplômés issus de seize Universités et Hautes Écoles européennes, concrétise le projet éditorial de CeROArt : favoriser l’approche plurielle et interdisciplinaire de la conservation-restauration, susciter la prise de parole de conservateurs-restaurateurs et encourager son expression, sous une forme scientifique et académique. La présente publication ne ponctue pas une évolu...

La pensée de Schumpeter face à celles de Marx et de Walras

Directory of Open Access Journals (Sweden)

Henri Denis

2012-11-01

Full Text Available L’une des moindres originalités de l’œuvre de Joseph Schumpeter n’est pas de comporter des jugements extrêmement favorables sur des auteurs aussi opposés que Marx et Walras. Dans Capitalisme, socialisme et démocratie, Schumpeter écrit : « La vision de Marx était juste. Nous pouvons donc nous y rallier en associant la transformation sociale spécifique qui se poursuit sous nos yeux avec l’évolution économique qui en est le moteur initial. » (Schumpeter, 1942, 268Mais Schumpeter n’est pas moins...

Structure et stabilité des bancs et agrégations de poissons pélagiques côtiers tropicaux : application halieutique

OpenAIRE

Soria, Marc

1994-01-01

Afin de cerner le rôle du comportement animal dans les problèmes rencontrés lors de l'estimation des stocks de poissons pélagiques en halieutique par les méthodes d'évaluation directes (acoustique) et indirectes, nous avons entrepris l'étude, en milieu naturel, de la structure et de la stabilité des bancs de petits poissons pélagiques côtiers tropicaux (Clupéidés, Engraulidés). Cette étude est basée sur des observations acoustiques et visuelles (aériennes et sous-marines) simultanées... Nous ...

Pêche thonière et dispositifs de concentration de poissons

OpenAIRE

Le Gall, Jean-yves; Cayre, Patrice; Taquet, Marc

2000-01-01

Le colloque international « Pêche thonière et dispositifs de concentration de poissons» organisé en octobre 1999, en Martinique, permet de dresser un bilan, sous forme de synthèses régionales, de l'exploitation des grands poissons pélagiques à l'aide de DCP dans les trois océans et en Méditerranée. La technologie, les méthodes de pêche, l'impact sur les ressources, le comportement agrégatif des poissons et les aspects socio-économiques de l'utilisation des DCP sont les principaux thèmes dével...

Microstructural evolutions of zirconium alloys under irradiation. Link with the irradiation growth phenomenon; Evolutions microstructurales des alliages de zirconium sous irradiation. Liens avec le phenomene de croissance

Energy Technology Data Exchange (ETDEWEB)

Simonot, C

1995-07-18

This study deals with the irradiation-induced growth and microstructural evolutions of Zircaloy-4 type materials (ZrSn{sub 1.2-1.7} Fe{sub 0.18-0.24} Cr{sub 0.07-0.13} O{sub 0.09-0.15}), used as cladding and guide-tubes in PWR`s fuel assemblies. The main objective was to obtain a better understanding of the growth acceleration which may occur at high doses for the recrystallized metallurgical state. The elongation values of stress-free tubes irradiated at 400 deg in experimental reactors give clear indication of accelerated growth after a critical dose. Microstructural investigations reveal some large basal plane dislocation loops with vacancy character, which is an unexpected defect configuration for an hexagonal material with a c/a ratio less than the ideal value. In addition, a significant redistribution of iron and chromium solute elements comes from the dissolution of the initial Zr(Fe,Cr){sub 2} phases. In a guide-tube irradiated to high dose at 320 deg in a power reactor, a large density of these c-component loops was also observed in coincidence with a large iron re-solution due to the progressive partial amorphization of Laves phases. By contrast, as long as a negligible amount of iron is available in the matrix (start of progressive) amorphization at 350 deg or complete amorphization without any chemical change at 280 deg, only prism plane loops with interstitial and vacancy character are observed and the steady-state growth rate is low. A mechanism taking into account the Diffusional Anisotropy Difference of the radiation induced point defects seems to be the most suitable to explain the correlations between microstructural evolutions and growth rates. However it does not allow to predict the dose necessary for the formation of the basal plane loops responsible for the growth acceleration. (Abstract Truncated)

Vacuum welding of metals; Soudage des metaux sous vide

Energy Technology Data Exchange (ETDEWEB)

Stohr, J A; Briola, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

This new welding process has been developed by the Commissariat a l'Energie Atomique (CEA) in France. The edges of the work-pieces are melted by the impact of an electron beam produced by an electron gun. Welding is carried out in a vacuum of 10{sup -4} to 10{sup -8} mm of mercury. The welding machine consists, diagrammatically, of: a) a metal enclosure in which a vacuum is produced; b) a cathode for electron emission, a high-voltage generator for accelerating these electrons, a focusing device; c) a mechanical device for moving (rotating) the work-piece. Advantages of the process: 1) possible welding of highly oxidizable metals (e.g. zirconium); 2) fabrication of high-vacuum-sealed metal containers; 3) production of very deeply penetrated welds. Therefore, this new process is particularly advantageous for atomic power applications, the fabrication of electron tubes and, more generally, for all industries in which very special metals are used. (author) [French] Ce procede de soudage a ete recemment mis au point au Commissariat a l'Energie Atomique en France (CEA). Il consiste a utiliser, pour fondre les levres des pieces a souder, l'impact d'un faisceau d'electrons produit par un canon a electrons. Le soudage s'effectue sous un vide de 10{sup -4} a 10{sup -8} mm de mercure. La machine a souder se compose schematiquement: a) d'une enceinte metallique ou l'on fait le vide; b) d'une cathode emettant des electrons, d'un generateur H.T. permettant d'accelerer ces electrons d'un dispositif de focalisation; c) d'un dispositif mecanique permettant le deplacement (rotation) de la piece a souder. Avantages de ce procede: 1) possibilite de souder les metaux tres oxydables (exemple: zirconium); 2) realisation de 'containers' metalliques fermes sous vide pousse; 3) obtention de profondeurs de soudures considerables. Ce nouveau procede est donc particulierement interessant pour l ' energie atomique, la fabrication des tubes electroniques et, en general, toutes les industries

Contribution to the study of recoil species produced by potassium ferrocyanide neutron irradiation; Contribution a l'etude de la reactivite des especes de recul dans le ferrocyanure de potassium irradie aux neutrons thermiques

Energy Technology Data Exchange (ETDEWEB)

Meriadec Vernier de Byans, B. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-04-01

The chemical species produced by potassium ferrocyanide neutron irradiation were separated and identified. The study of their behaviour upon thermal annealing has allowed to establish a scheme of reaction as well as a kinetic treatment of the data. Activation energies are determined in different conditions and the effects of radiation dose, oxygen and water of crystallisation upon the activation energies were studied. Preliminary E.S.R. data and its relevance to the decomposition process is also discussed. (authors) [French] On a separe et identifie les differentes especes chimiques produites par irradiation neutronique de ferrocyanure de potassium. L'etude de leur comportement au cours du recuit thermique a permis l'application de differentes cinetiques et l'etablissement d'un schema de reaction. On a deterrmine la valeur des energies d'activation dans differentes conditions de recuit ainsi que l'influence de la dose de radiations, de l'oxygene et de l'eau de cristallisation sur ces energies. Une serie de mesures de resonance paramagnetique electronique a complete cette etude. (auteurs)

The cryogenic installations for irradiation in the reactors Melusine and Siloe; Les installations cryogeniques pour irradiations des reacteurs Melusine et Siloe

Energy Technology Data Exchange (ETDEWEB)

Bochirol, L; Le Calvez, J; Doulat, J; Verdier, J; Lacaze, A; Weil, L [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1964-07-01

vaporized in the atmosphere and without any pollution of the refrigerating circuit. Lastly, a few words are said about the liquid helium loop, a prototype of which has worked, and which is being rebuilt with an increased power. (authors) [French] L'etude des defauts crees par l'irradiation dans les solides est d'un interet theorique et pratique, considerable. L'irradiation a basse temperature permet d'obtenir les defauts dans leur etat le plus simple, leur etat 'primaire' sans que l'agitation thermique permette leur annihilation ou leur rearrangement. L'irradiation en pile a basse temperature pose un certain nombre de problemes techniques provenant de la puissance de refrigeration necessaire, qui est quelquefois considerable, des reactions chimiques possibles sous rayonnement et du manque d'espace dans un reacteur. Enfin, la necessite de faire toute l'irradiation et les mesures ulterieures sans rechauffer les; echantillons impose que le dispositif fonctionne en continu sans defaillance et qu'il soit equipe de facon a permettre la recuperation des echantillons froids, ou bien leur mesure et leur rechauffage controle 'in situ'. On decrit la facon dont ces problemes ont ete resolus a Grenoble, pour des dispositifs d'irradiation a 78 deg. K, 28 deg. K et 4 deg. K dans les deux piles piscines Melusine et Siloe. Quelques resultats d'exploitation sont donnes sur la boucle a azote liquide, dite type A, qui fonctionne depuis plusieurs annees dans Melusine. En particulier certaines observations sont faites sur les reactions chimiques qui peuvent se produire sous irradiation dans l'azote liquide impur. On decrit assez en detail la boucle a azote liquide, dite type A, qui vient d'etre installee dans le reacteur Siloe. Les traits essentiels de cet appareil sont: qu'il permet l'irradiation dans des flux plus eleves que le precedent et que son exploitation est grandement facilitee grace a un mode de realisation qui permet l'acces aux echantillons sans demontage ni deconnexion de l

ÉTUDE EXPÉRIMENTALE DES COMPORTEMENTS DE CIVELLES D’ANGUILLA ANGUILLA L. INFLUENCE DE LA DENSITÉ ET DE LA DISPONIBILITÉ EN ABRIS

Directory of Open Access Journals (Sweden)

BARDONNET A.

2005-10-01

Full Text Available Les comportements d’émigration et d’utilisation de l’espace développés par des civelles ont été observés dans des bacs et plans d’eau expérimentaux. Dans les bacs accueillant 55 ind./m2 sans possibilité d’émigration, la densité d’abris végétaux a été contrôlée (densités d’abris basse, 2 tiges de végétation artificielle par bac ou haute, 9 tiges par bac et le suivi a duré 2 mois et demi. Dans les plans d’eau ouverts, la densité de civelles introduites a été définie selon plusieurs modalités (1,6 - 6 - 9 et 12 ind./m2 et le suivi a duré 1 mois et demi. En bacs, après une période de 5 à 6 jours, les abris sont fortement recherchés pendant environ 6 semaines, les individus montrant alors une forte grégarité. Cette dernière disparaît ensuite, les abris sont alors moins recherchés et des comportements agressifs font leur apparition. En plans d’eau, les sorties concernent en moyenne 17 % du stock initial (mini = 7 %, maxi = 35 %, interviennent rapidement et sont presque toutes dirigées vers l’amont. Leur intensité ne dépend pas de la densité initiale et apparaît plus importante dans les bassins sans herbier. Les tailles et poids moyens des émigrants sont plus importants que ceux du lot initial. Au terme du suivi, la croissance apparaît forte, hétérogène et associée à une faible survie dans les plans d’eau peu ou moyennement alevinés. Elle apparaît plus faible, homogène et associée à une bonne survie dans les bassins à forte densité initiale. Ces observations sont compatibles avec l’expression d’un comportement grégaire en condition de densité importante, comportement favorisant une croissance homogène, ayant pour conséquence de retarder l’apparition d’actes agressifs. Au contraire, dans des contextes de faible densité, l’expression rapide du potentiel de croissance de quelques individus favoriserait l’apparition d’actes agressifs.

The compatibility of chromium-aluminium steels with high pressure carbon dioxid at intermediate- temperatures; Compatibilite des aciers au chrome-aluminium avec le gaz carbonique sous pression aux temperatures moyennes

Energy Technology Data Exchange (ETDEWEB)

Leclercq, D; Loriers, H; David, R; Darras, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

With a view to their use in the exchangers of nuclear reactors of the graphite-gas or heavy water-gas types, the behaviour of chromium-aluminium steels containing up to 7 per cent chromium and 1.5 per cent aluminium has been studied in the presence of high-pressure carbon dioxide at temperatures of between 400 and 700 deg. C. The two most interesting grades of steel (2 per cent Cr - 0.35 per cent Al - 0.35 per cent Mo and 7 per cent Cr - 1.5 per cent Al - 0.6 per cent Si) are still compatible with carbon dioxide up to 550 and 600 deg. C respectively. A hot dip aluminised coating considerably increases resistance to oxidation of the first grade and should make possible its use up to temperatures of at least 600 deg. C. (authors) [French] Dans l'optique de leur emploi dans les echangeurs de reacteurs nucleaires des filieres graphite-gaz ou eau lourde-gaz, le comportement en presence de gaz carbonique sous pression d'aciers au chrome-aluminium, contenant jusqu'a 7 pour cent de chrome et 1,5 pour cent d'aluminium a ete etudie entre 400 et 700 deg. C. Les deux nuances les plus interessantes (2 pour cent Cr - 0,35 pour cent Al - 0,35 pour cent Mo et 7 pour cent Cr - 1,5 pour cent Al - 0,6 pour cent Si) restent compatibles avec le gaz carbonique jusqu'a 550 et 600 deg. C respectivement. Un revetement d'aluminium, effectue par immersion dans un bain fondu, ameliore notablement la resistance a l'oxydation de la premiere et doit permettre son empioi jusqu'a 600 deg. C au moins. (auteurs)

Illustration de systèmes de surveillance de deuxième génération du VIH et IST à travers une étude de comportement et une étude de séroprévalence dans les Territoires français du Pacifique Sud

OpenAIRE

Laroche, Sophie

2007-01-01

Ce mémoire se penche sur la prévalence du VIH/SIDA et d'autres IST [infections sexuellement transmissibles] parmi les jeunes dans les Territoires français du Pacifique Sud. Le présent rapport expose les principes des SDG [systèmes de surveillance de deuxième génération], illustrés par deux types d'enquêtes : une enquête de comportements et une enquête de séroprévalence. [...] L'enquête de comportements intitulée: "Enquête sur les attitudes, comportements et croyance du VIH/SIDA parmi les j...

Effect of the cooking method (grilling, roasting, frying and sous-vide) on the oxidation of thiols, tryptophan, alkaline amino acids and protein cross-linking in jerky chicken

OpenAIRE

Silva, Fábio A. P.; Ferreira, Valquíria C. S.; Madruga, Marta S.; Estévez, Mario

2016-01-01

Broiler breast (pectoralis major) meat was submitted to salting with NaCl + NaNO3 followed by a drying process to produce jerky-type chicken. The final product (raw broiler charqui) was desalted and then cooked using grilled, roasted, fried and sous-vide techniques. Sous-vide cooked samples showed lowest results of moisture loss compared to roasted and fried ones. Fatty acid profile suffered minor changes after cooking of broiler charqui. Regarding to protein oxidation, tryptophan fluorescenc...

Effect of the cooking method (grilling, roasting, frying and sous-vide) on the oxidation of thiols, tryptophan, alkaline amino acids and protein cross-linking in jerky chicken.

Science.gov (United States)

Silva, Fábio A P; Ferreira, Valquíria C S; Madruga, Marta S; Estévez, Mario

2016-08-01

Broiler breast ( pectoralis major ) meat was submitted to salting with NaCl + NaNO 3 followed by a drying process to produce jerky-type chicken. The final product (raw broiler charqui) was desalted and then cooked using grilled, roasted, fried and sous-vide techniques. Sous-vide cooked samples showed lowest results of moisture loss compared to roasted and fried ones. Fatty acid profile suffered minor changes after cooking of broiler charqui. Regarding to protein oxidation, tryptophan fluorescence, protein carbonylation and disulphide bonds formation of chicken charqui were affected by cooking temperature while free thiol groups, Schiff base formation and hardness were mostly impacted by the length of cooking. Instrumental color of broiler charqui was affected by the type of cooking, being closely related with Maillard products formation. In conclusion, sous-vide technique seems to be the most advantageous cooking method to obtain high-quality ready-to-eat chicken charqui.

Metabolism of cerium 144 in rat. Distribution - elimination - dosimetry; Metabolisme du cerium 144 chez le rat. Distribution - elimination - dosimetrie

Energy Technology Data Exchange (ETDEWEB)

Remy, Jacques

1959-07-01

This academic report concerns a study during which cerium 144 has been intravenously injected to three-month old rats under the form of cerium chloride in aqueous solution with pH of 9,5. Rats have then been sacrificed at different times after the injection, and organ or tissue samplings have been performed to study the isotope distribution in their bodies. This allowed the calculation of internal irradiation doses locally received by the animal, and also to identify critical organs with respect to cerium 144. Thus, until the twentieth day after injection, liver is the critical organ. After, it is the skeleton, for the rest of the animal's life. The bone internal irradiation is the highest danger for an internal cerium 144 contamination, due to threats on body hematopoietic functions [French] Le Cerium 144 est injecte a des rats de trois mois par voie intraveineuse, sous forme de chlorure en solution aqueuse a pH = 9,5. Une telle solution est colloidale. Les rats sont sacrifies par groupe de 5 a des temps differents apres l'injection et des prelevements d'organes ou de tissus sont effectues qui permettent d'etudier la distribution de l'isotope dans l'organisme. Cette etude de la distribution du Cerium 144 dans l'organiqme du rat a permis egalement le calcul des doses d'irradiation interne recues localement par l'animal. Ces donnees permettent de definir les organes critiques de l'organisme pour le Cerium 144: Jusqu'au 20eme jour l'organe critique est le foie. Ce sera ensuite le squelette, et ce, pendant toute la vie de l'animal. L'irradiation interne de l'os constitue, en raison des menaces qu'elle comporte pour les fonctions hematopoietiques de l'organisme, le plus grand danger d'une contamination interne par le Cerium 144.

Psychology as a Science of Subject and Comportment, beyond the Mind and Behavior.

Science.gov (United States)

Pérez-Álvarez, Marino

2018-03-01

The turn of qualitative inquiry suggests a more open, plural conception of psychology than just the science of the mind and behavior as it is most commonly defined. Historical, ontological and epistemological binding of this conception of psychology to the positivist method of natural science may have exhausted its possibilities, and after having contributed to its prestige as a science, has now become an obstacle. It is proposed that psychology be reconceived as a science of subject and comportment in the framework of a contextual hermeneutic, social, human behavioral science. Thus, without rejecting quantitative inquiry, psychology recovers territory left aside like introspection and pre-reflective self-awareness, and reconnects with traditions marginalized from the main stream. From this perspective psychology might also recover its credibility as a human science in view of current skepticism.

Élisabeth BADINTER, Mme du Châtelet, Mme d’Épinay ou l’ambition féminine au XVIIIe siècle

OpenAIRE

Duprat, Annie

2009-01-01

Cet ouvrage est la réédition, un peu transformée et augmentée, d’un livre qu’Élisabeth Badinter avait consacré en 1983 à ces deux femmes savantes du siècle des Lumières, Emilie du Châtelet et Louise d’Épinay, sous le titre Émilie, Emilie, l’ambition féminine au XVIIIe siècle. Ce titre un peu obscur devait attirer l’attention sur les similitudes (de destin, de vie, de comportement et d’intérêts scientifiques entre les deux femmes, Louise d’Épinay se faisant appeler Émilie pour plaire à son ama...

Art et comportements symboliques au Paléolithique : quelques points de vue actuels

OpenAIRE

Paillet, Patrick

2015-01-01

Du temps de la reconnaissance à l'archéologie des grottes ornées Édouard Lartet et Édouard Piette principalement ont marqué le XIX ème siècle par leurs extraordi-naires découvertes d'art mobilier et leurs efforts pour les faire reconnaître par la communauté scien-tifique alors placée sous l'autorité dogmatique de Gabriel de Mortillet et d'Émile Cartailhac. Ils ont aussi oeuvré, non sans mal, pour en faire admettre l'antiquité et l'authenticité. Une grande partie du XX ème siècle fut celle des...

Patrimonialiser les bases de sous-marins et le Mur de l’Atlantique

OpenAIRE

Prelorenzo, Claude

2014-01-01

Le Mur de l’Atlantique court de la frontière espagnole jusqu’au nord de la Norvège. Au sein de ce dispositif sont installées cinq bases de sous-marins : Dunkerque, Saint-Nazaire, Lorient, La Rochelle et Bordeaux. Après une période de purgatoire, liée aux souvenirs trop frais des bombardements qu’ils ont attirés sur les villes, les édifices du mur sont entrés dans la sphère de la culture et du tourisme. Nous posons alors la question suivante : de quoi ces édifices portent-ils témoignage, et no...

Proceedings of the European Symposium on Pressure Equipment - ESOPE 2007; Actes des Journees d'Etudes Europeennes Equipements sous Pression - ESOPE 2007

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

recherche et les nouveaux projets. Ces echanges seront alement l'occasion de repondre aux questions exprimees par les participants. Chaque symposium a ainsi une 'epine dorsale' structurante, mais se veut aussi le lieu d'echanges sur les themes divers souhaites par la profession. Les sessions techniques traditionnelles ont ainsi ete reconduites: - Sessions Conception / Materiaux, - Sessions Fabrication, - Sessions Aptitude au Service, auxquelles doit etre ajoutee, l'apres-midi du premier jour, une session speciale consacree aux Codes Nationaux, Europeens et Internationaux. La session pleniere d'ouverture est egalement centree sur ce dernier theme avec des interventions sur les evolutions europeenne en matiere reglementaire, les orientations retenues pour les equipements sous pression en usage dans l industrie nucleaire, les normes europeennes et la collaboration internationale, les normes chinoises et enfin les recents developpements des codes et normes de l'ASME aux USA. ESOPE 2007 comporte egalement une session posters organisee dans le cadre de l'exposition internationale, qui permet, en parallele au Symposium, aux entreprises qui le souhaitent de valoriser leurs realisations industrielles. (auteur)

Present Status of Nitrogen Fixation by Reactor Radiation; Etat Actuel des Recherches sur l'oxydation directe de l'azote sous irradiation dans des reacteurs; Sovremennoe sostoyani opytov po okisleniyu azota izlucheniem iz reaktorov; Estado actual de las investigaciones sobre fijacion del nitrogeno por irradiacion en reactores

Energy Technology Data Exchange (ETDEWEB)

Harteck, P; Dondes, S [Rensselaer Polytechnic Institute, Troy, NY (United States)

1960-07-15

'oxydation directe de l'azote sous irradiation, entreprises depuis plusieurs annees par le Rensselaer Polytechnic Institute et le Brookhaven National Laboratory, utilisent directement les particules de recul de fission comme rayonnements ionisants, au moyen de la dispersion d'uranium-235 dans des fibres de verre de cinq microns de diametre environ. Les auteurs ont determine les effets de la temperature, de la pression et du rapport azote/oxygene sur la valeur de G pour l'oxydation de l'azote et ont publie le compte rendu de leurs travaux. Ils en donnent un bref apercu. Les recherches en question ont ete effectuees avec des systemes statiques; plus recemment des systemes statiques et des systemes a circulation ont ete utilises a la fois. Avec les systemes statiques, les auteurs se sont surtout attaches a etudier l'effet de l'intensite des rayonnements, notamment sur la cinetique d'equilibre sous irradiation. Ils ont constate que dans des melanges ou le rapport azote/oxygene est de 4 a 1 et de 2 a 1 N0{sub 2} et N{sub 2}0 se forment jusqu'a epuisement de tout l'oxygene present. Un systeme a circulation continue (cycling) fonctionne maintenant dans une boucle a l'interieur du reacteur de Brookhaven. Les auteurs fournissent sur les effets de la temperature, de la pression, du rapport azote/oxygene et de l'intensite des rayonnements des donnees que l'on pourra utiliser pour etablir un projet de reacteur de chimie nucleaire. Le systeme actuel fonctionne sous 10 atmospheres et a 150{sup o}C. La temperature est fonction de l'energie de fission liberee dans les fibres de verre et de la resistance thermique du circuit. Une autre boucle, qui doit fonctionner sous 50 - 75 atmospheres et a 600{sup o} C, est en construction. Il est possible, grace a ces boucles, d'etudier les caracteristiques d'un systeme continu, y compris le comportement des produits de fission liberes dans le courant, gazeux. Les auteurs distinguent trois stades dans la cinetique complexe de l'oxydation de l'azote: reactions

Heat extraction from deep rocks at Soultz-sous-Forets

International Nuclear Information System (INIS)

Gerard, A.; Baumgaeriner, J.; Baria, R.

1996-01-01

A European coordinated research program for the study of hot-dry-rock systems is in progress at Soultz-sous-Forets (Alsace, France). The aim of this project is the extraction of heat from the granite batholiths distributed along the Rhine graben. The technique used involves important forced water circulations under relatively low-pressures using the natural geologic fractures network. The region concerned extends about 3000 km 2 under both the French and the German territories. The program started in 1987 with preliminary scientific investigations followed by a feasibility study. In December 1995, two deep wells, GPK1 (3600 m) and GPK2 (3900 m) were available and equipped for hydraulic testing. Temperatures encountered can reach 168 C at 3800 m with a geothermal gradient exceeding 3.5 C/100 m below 3600 m. The tests performed have shown that the hydraulic performances of these wells can be considerably improved using a simple well stimulation technique. (J.S.). 1 fig

ETUDE COMPARATIVE DU COMPORTEMENT A L’USURE DE CERTAINES NUANCES DE CERAMIQUE DE COUPE EN TOURNAGE

Directory of Open Access Journals (Sweden)

M A YALLESE

2002-06-01

Full Text Available Des essais de coupe ont été effectués par quatre outils en céramique, face à l’acier  AF37. Les résultats de ces essais nous ont permis d’étudier l’influence  des paramètres de coupe sur le comportement à l’usure des différentes céramiques étudiées. Pour ces différentes céramiques la relation entre la tenue et les paramètres de coupe a été exprimée suivant le modèle mathématique de Taylor.

Les besoins en oxygène des poissons marins et leur comportement en conditions hypoxiques (revue bibliographique)

OpenAIRE

Person-le Ruyet, Jeanine

1986-01-01

Les données expérimentales relatives aux besoins en oxygène des poissons marins (pélagiques et démersaux) sont rappelées. Les variations de la consommation d'oxygène en fonction du poids (w) sont généralement décrites par l'équation : M02 (ml/h) = 0,33 W0. 80 Le comportement général des poissons en conditions hypoxiques et leurs limites de tolérance sont de même considérés en fonction du stade de développement.

ETUDE DU COMPORTEMENT MECANIQUE DU BETON CELLULAIRE AUTOCLAVE PRODUIT EN ALGERIE

Directory of Open Access Journals (Sweden)

R BELOUETTAR

2002-12-01

Full Text Available Ce travail présente une étude expérimentale du comportement mécanique du béton cellulaire autoclavé. L’étude est portée essentiellement sur une série d’essais mécaniques en compression quasistatique à différentes vitesses de déformation variables entre 10-4 s-1 et 10 s-1 et à deux états différents (état sec et état saturé d’eau. En général, l’augmentation de la vitesse de déformation donne une augmentation de la contrainte critique du béton cellulaire autoclavé. Le béton cellulaire autoclavé présente une sensibilité à la vitesse de déformation positive. La valeur du module d’élasticité est proche de la valeur standard (1.5 GPa pour un béton cellulaire autoclavé de masse volumique égale à 500-550 kg/m3.

Reconstruction de la surface de Fermi dans l'etat normal d'un supraconducteur a haute Tc: Une etude du transport electrique en champ magnetique intense

Science.gov (United States)

Le Boeuf, David

Des mesures de resistance longitudinale et de resistance de Hall en champ magnetique intense transverse (perpendiculaire aux plans CuO2) ont ete effectuees au sein de monocristaux de YBa2Cu3Oy (YBCO) demacles, ordonnes et de grande purete, afin d'etudier l'etat fondamental des supraconducteurs a haute Tc dans le regime sous-dope. Cette etude a ete realisee en fonction du dopage et de l'orientation du courant d'excitation J par rapport a l'axe orthorhombique b de la structure cristalline. Les mesures en champ magnetique intense revelent par suppression de la supraconductivite des oscillations magnetiques des resistances longitudinale et de Hall dans YBa2Cu 3O6.51 et YBa2Cu4O8. La conformite du comportement de ces oscillations quantiques au formalisme de Lifshitz-Kosevich, apporte la preuve de l'existence d'une surface de Fermi fermee a caractere quasi-2D, abritant des quasiparticules coherentes respectant la statistique de Fermi-Dirac, dans la phase pseudogap d'YBCO. La faible frequence des oscillations quantiques, combinee avec l'etude de la partie monotone de la resistance de Hall en fonction de la temperature indique que la surface de Fermi d'YBCO sous-dope comprend une petite poche de Fermi occupee par des porteurs de charge negative. Cette particularite de la surface de Fermi dans le regime sous-dope incompatible avec les calculs de structure de bande est en fort contraste avec la structure electronique presente dans le regime surdope. Cette observation implique ainsi l'existence d'un point critique quantique dans le diagramme de phase d'YBCO, au voisinage duquel la surface de Fermi doit subir une reconstruction induite par l'etablissement d'une brisure de la symetrie de translation du reseau cristallin sous-jacent. Enfin, l'etude en fonction du dopage de la resistance de Hall et de la resistance longitudinale en champ magnetique intense suggere qu'un ordre du type onde de densite (DW) est responsable de la reconstruction de la surface de Fermi. L'analogie de

L'intervention sous-marine : situation actuelle et perspectives d'avenir Underwater Operations and Techniques: Current Situation and Future Outlook

Directory of Open Access Journals (Sweden)

Bertrand A. R. V.

2006-11-01

Full Text Available A l'occasion de la Conférence Internationale de Paris sur la Pénétration sous-marine(6-8 décembre 1982, cet article fait le point sur les différents moyens d'intervention sous-marine disponibles à ce jour (plongeurs, engins télécommandés, sous-marins à pression atmosphérique et sur un certain nombre de problèmes technologiques communs (matériaux, télémanipulation, navigation, sources d'énergie. Ce domaine est encore en pleine évolution et fait appel aux récentes innovations technologiques. Bien que les engins télécommandés semblent avoir actuellement la faveur des industriels, les autres moyens restent d'avenir prometteur, la complémentarité devant remplacer dans le futur la concurrence La résurrection de l'Argyronète qui doit devenir en 1985 un banc d'essais des nouvelles techniques est le témoignage de l'activité de ce secteur industriel. This article is based on the International Symposium in Paris on Underwater Operations and Techniques 6-9 December 1982. It reviews the different methods now available for underwater operations (divers, remote-controlled vehicles, atmospheric-pressure submarines and various technological problems common to all of them (materials, remote manipulation, navigating, power sources. This field is evolving rapidly and makes use of the most recent technological innovations. Although remote-controlled vehicles now seem to be favored by industrialists, the other methods still have a promising future, and the complementariness of these methods can be expected to replace rivalry among them. The resurrection of the Argyronète project, which should become a test bench for new techniques in 1985, is a good illustration of the activity going on in this industrial sector.

Effect of different temperature-time combinations on physicochemical, microbiological, textural and structural features of sous-vide cooked lamb loins.

Science.gov (United States)

Roldán, Mar; Antequera, Teresa; Martín, Alberto; Mayoral, Ana Isabel; Ruiz, Jorge

2013-03-01

Lamb loins were subjected to sous-vide cooking at different combinations of temperature (60, 70, and 80 °C) and time (6, 12, and 24 h). Different physicochemical, histological and structural parameters were studied. Increasing cooking temperatures led to higher weight losses and lower moisture contents, whereas the effect of cooking time on these variables was limited. Samples cooked at 60 °C showed the highest lightness and redness, while increasing cooking temperature and cooking time produced higher yellowness values. Most textural variables in a texture profile analysis showed a marked interaction between cooking temperature and time. Samples cooked for 24h showed significantly lower values for most of the studied textural parameters for all the temperatures considered. Connective tissue granulation at 60 °C and gelation at 70 °C were observed in the SEM micrographs. The sous-vide cooking of lamb loins dramatically reduced microbial population even with the less intense heat treatment studied (60 °C-6 h). Copyright © 2012 Elsevier Ltd. All rights reserved.

A study of the behaviour of irradiated or unirradiated grafts in the camera aquosa of irradiated and unirradiated animals; Etude du comportement d'un greffon irradie ou non, transplante dans la chambre anterieure de l'oeil d'un animal irradie ou non

Energy Technology Data Exchange (ETDEWEB)

Djalali-Behzad, G [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1969-06-01

Following grafts of new born mice spinal ganglia in the 'camera aquosa' of adult mice, the authors tried hematopoietic tissue grafts in the same conditions. The growth of iso-logous and hetero-logous bone marrow in the 'camera aquosa' showed that this tissue, even after exposure to supralethal doses, was capable of survival and growth. A counter-experiment with non irradiated bone marrow grafts in the 'camera aquosa' of rats delivered 700 rads led to the conclusion that the environment, intoxicated by exposure, acted on the graft so that after vascularization it became unable to grow. (author) [French] Apres avoir greffe des ganglions rachidiens de souriceaux nouveaux-nes dans la chambre anterieure de l'oeil de souris adultes, l'auteur a tente de greffer du tissu hematopoietique de la meme facon. La proliferation de la moelle osseuse isologue et heterologue, dans la chambre anterieure de l'oeil, lui a permis de mettre en evidence une certaine capacite de survie et de proliferation de ce tissu irradie meme a dose supraletale. Par une contre-experimentation, c'est-a-dire par la greffe de moelle non irradiee dans la chambre anterieure de rats irradies a 700 rads, il conclut que le milieu ambiant, intoxique par l'irradiation, agit sur le greffon de telle sorte que ce dernier, apres s'etre vascularise, devient depourvu de son aptitude de proliferation. (auteur)

Production durable de légumes sous-utilisés en vue d'améliorer la ...

International Development Research Centre (IDRC) Digital Library (Canada)

Production durable de légumes sous-utilisés en vue d'améliorer la sécurité alimentaire en milieu ruralrity (Les légumes indigènes revêtent une importance capitale pour les femmes pauvres vivant en milieu rural, mais ont reçu, à ce jour, peu d'attention de la part des milieux de la recherche, du développement et des ...

Measurements for uranium-light water subcritical assembly; Mesures pour ensemble sous-critique uranium-eau legere d'enseignement

Energy Technology Data Exchange (ETDEWEB)

Barre, J Y [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1964-07-01

The aim of this report is to determine the matter Laplacian of a subcritical assembly, done for educational purposes, using natural uranium combustible and light water for the moderator and the reflector. (M.B.) [French] L'objet de ce rapport est la determination du Laplacien matiere d'un reseau sous-critique, destine a l'enseignement, utilisant comme combustible l'uranium naturel et comme moderateur et reflecteur l'eau naturelle. (M.B.)

Effets de l'interaction avec l'oxygène sur le comportement de couches semi-conductrices de ZnO, SnO{2} et CdSe

Science.gov (United States)

Ain-Souya, A.; Ghers, M.; Haddad, A.; Tebib, W.; Rehamnia, R.; Messsalhi, A.; Bounouala, M.; Djouama, M. C.

2005-05-01

Les propriétés superficielles des matériaux solides diffèrent de celles du volume. A la surface, des défauts de différentes natures peuvent être présents. Ils permettent à la surface d'être interactive avec le milieu ambiant. Les multiples interactions entre les états de surface et des éléments du milieu extérieur peuvent modifier les propriétés superficielles. Ce travail étudie la régénération de couches semi-conductrices après adsorption isotherme d'oxygène à différentes températures effectuées entre 20 ° C et 300 ° C. Les matériaux qui ont servi à l'étude sont des couches de ZnO, SnO{2} et CdSe. Celles de CdSe ont été obtenues par co-évaporation, sous vide, de cadmium et de sélénium. Les échantillons de ZnO et SnO{2} ont été élaborés par oxydation, à des températures respectives de 450 ° C et 200 ° , de Zn et Sn déposés par électrolyse et par évaporation sous vide. Les matériaux évaporés ont été déposés sur des plaquettes en verre, les autres ont été électrodéposés sur des substrats métalliques. Les variations des propriétés électriques des couches ont été suivies par mesure de leur résistance électrique superficielle R. Les courbes LogR = f (103 /T (K)), relevées sous vide à différentes températures, sont caractéristiques d'un comportement de semi-conducteur. Des essais d'adsorption d'O{2} à différentes températures montrent des variations considérables de R. En effet, la chimisorption forte d'un gaz par une surface semi-conductrice est telle que l'échange électronique entre adsorbant et adsorbat provoque la formation d'une zone de charge d'espace modifiant la conduction superficielle. Les résultats mettent en évidence des domaines de température de plus haute sensibilité à l'oxygène. Pour le CdSe, certaines désorptions isothermes ont été suffisantes pour une régénération totale des échantillons. Les couches de ZnO ont souvent nécessité des désorptions programm

Contribution to the study of internal friction in graphites; Contribution a l'etude du frottement interieur des graphites

Energy Technology Data Exchange (ETDEWEB)

Merlin, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-03-01

'une transformation a l'etat solide, ceci au cours du recuit apres irradiation. Elle est attribuee a la reorganisation de defauts interstitiels. Quelques informations ont ainsi ete apportees sur les graphites, en particulier sur: leur comportement sous faibles sollicitations mecaniques; la nature des defauts d'irradiation et leur evolution au cours des recuits; l'evolution structurale au cours de la graphitation; la liaison entre le frottement interieur et les proprietes mecaniques macroscopiques. (auteur)

Comportment of various magnesium alloys in carbon dioxide under pressure, between 400 and 600 deg; Compatibilite de divers alliages de magnesium avec le gaz carbonique sous pression entre 400 et 600 deg

Energy Technology Data Exchange (ETDEWEB)

Darras, R; Baque, P; Chevilliard, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

'magnesium oxyde fritte'. Les echantillons, preleves dans des produits files, sont convenablement polis, deux etats de surface reproductibles etant realises a titre comparatif. Les essais ont ete effectues dans le gaz carbonique purifie, aux pressions de 25 et 60 atmospheres, et a des temperatures allant de 400 a 600, au moyen d'autoclaves speciaux en acier inoxydable, chauffes exterieurement. Leur duree est en general superieure a 1000 heures. Les equations des courbes d'augmentation de poids obtenues sont du type ({delta}p){sup n} = k.t (({delta}p en mg/cm{sup 2} et t en heures), l'exposant n etant voisin de 2, du moins jusqu'a 500 deg. C. En se referant a des resultats precedemment acquis quant a certains de ces materiaux exposes dans le gaz carbonique sous pression atmospherique et sous 15 atmospheres, il apparait que: 1) Pour un materiau determine: - a une pression donnee, l'oxydation augmente avec la temperature, - a une temperature donnee, l'oxydation augmente avec la pression, - dans les memes conditions de temperature et de pression, les resultats obtenus varient peu suivant les deux etats de surface etudies; 2) les alliages Mg-Zr presentent une resistance a l'oxydation amelioree par rapport au magnesium non allie; 3) l'alliage magnox est beaucoup moins avantageux dans le gaz carbonique que dans l'air, par rapport aux autres alliages. D'une facon generale, les courbes d'oxydation tendant vers un palier apres un certain temps d'exposition, la compatibilite de tous les alliages consideres avec le gaz carbonique apparait satisfaisante jusqu'a une temperature voisine de 500 deg. C, dans les conditions operatoires presentement definies; au dessus de 500 deg. C, des differences notables apparaissent entre les divers alliages, mais des phenomenes de sublimation interferent avec ceux d'oxydation, de sorte qu'un classement des divers materiaux ne peut etre base que sur leur resultante. (auteur)

Synthèse et validation d'une loi de commande linéaire robuste de braquage d'une automobile

OpenAIRE

MENHOUR, Lghani; LECHNER, Daniel; CHARARA, Ali

2010-01-01

Ce papier propose la synthèse d'un retour d'état robuste préprogrammé pour le contrôle de direction d'un véhicule. Celui-ci est utilisé pour simuler le comportement du véhicule sous des fortes sollicitations dynamiques. Les contraintes d'inégalités matricielles linéaires (LMI) et un modèle linéaire à paramètres variants sont utilisés pour la synthèse du retour d'état. Ensuite, une méthode d'interpolation des gains est utilisée pour la conception d'un retour d'état robuste préprogrammé. La str...

Méthode d'estimation des tassements des sols fins sous les remblais d'infrastructures ferroviaires pour lignes à grande vitesse

Science.gov (United States)

Said Alami, Soukaina; Reiffsteck, Philippe; Cuira, Fahd

2018-02-01

Le besoin de maîtriser les déformations des sols sous les remblais destinés à recevoir les structures de lignes à grande vitesse, en fait un enjeu important pour ces projets. Toutefois, de nombreuses difficultés ont été soulevées liées principalement au grand nombre d'incertitudes qui entourent le phénomène. En effet, la caractérisation géologique et géotechnique dépend de sondages et d'essais où le risque de remaniement est important et dont l'interprétation est, souvent, délicate. Cet article présente une procédure de calcul qui permettrait en pratique d'évaluer le tassement sous remblai avec une bonne précision et qui a été validée sur un certain nombre d'ouvrages. Pour cela, des corrections sont introduites aux méthodes usuelles de calcul permettant d'approcher les valeurs mesurées sur chantier.

Evolution de la perméabilité d'agrégats de sels sous contrainte liée à des circulations de fluides : dissolution, colmatage, déformation

OpenAIRE

Chen , Tao

1994-01-01

Le but de ce travail est d'étudier l'évolution de la perméabilité d'agrégats de sels sous contrainte lorsque les fluides circulant dans ces agrégats peuvent réagir avec le solide par des dissolutions et/ou des colmatages. Des essais de circulation de divers fluides à travers des échantillons de briques de sels sous contrainte ont permis de suivre l'évolution de la composition des fluides en cours d'essai. L'évolution des matériaux a été aussi caractérisée en cours d'essai (mesure de vitesse a...

Psychological Aspects of Deployment and Health Behaviours (Aspects psychologiques de la projection operationnelle et comportements lies a la sante)

Science.gov (United States)

2012-05-01

certains Panels, vous pouvez demander d’être inclus soit à titre personnel, soit au nom de votre organisation, sur la liste d’envoi. Les publications...comporter la dénomination « RTO » ou « AGARD » selon le cas, suivi du numéro de série. Des informations analogues, telles que le titre est la date de...dénomination « RTO » ou « AGARD » selon le cas, suivie du numéro de série (par exemple AGARD-AG-315). Des informations analogues, telles que le titre et la date

Theoretical aspects of neutron interaction: part 1 - interaction programme for ibm 7094, part 2 - the shielding sub-programme, part 3 - listing of the programme; Aspects theoriques de l'interaction neutronique: annexe 1 - programme interaction pour ibm 7094 - annexe 2 - sous programme ombre - annexe 3 - liste du programme

Energy Technology Data Exchange (ETDEWEB)

Moret-Bailly, J; Penet, F; Spinelli, J C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

Part I. Methods are described for obtaining the equations for a system of elements containing fissile matter: a) by using the balance after fission, b) by using the balance before fission, c) by the evolution equations. All these methods lead to equivalent matrices whose greatest proper value is the multiplication coefficient for the system K. It is shown how to calculate K. From this it is possible to deduce the rules which generalize the criterion for the bounded solid angle. An IBM 7094 programme applies this theory to the calculation of the installations made up of a maximum of 500 elements. It calculates the effective values of K, the leaks, the solid angles and then K. Part. II. This sub-programme calculates the shielding between the elements. (authors) [French] Sommaire, - Annexe I. On expose les methodes permettant d'obtenir les equations d'un systeme d'elements contenant de la matiere fissile: a) par le bilan apres fission, b) par le bilan avant fission, c) par les equations d'evolution. Toutes ces methodes conduisent a des matrices equivalentes dont la plus grande valeur propre est le coefficient de multiplication de l'ensemble K. On montre comment K se calcule. On en deduit des regles qui generalisent le critere de l'angle solide limite. Un programme pour IBM 7094 applique cette theorie au calcul des installations comportant au maximum 500 elements. II calcule les k effectifs, les fuites, les angles solides puis K. Annexe II. Ce sous-programme calcule les ombres entre les elements. (auteurs)

Lille, place financière intermédiaire sous la Révolution et l’Empire

OpenAIRE

De Oliveira, Matthieu

2011-01-01

Dernière grande place négociante et financière avant la frontière septentrionale, Lille joue pleinement son rôle d’intermédiaire entre les marchés parisiens au Sud et belgo-hollandais au Nord sous la Révolution et l’Empire. La déclaration de guerre en 1792 puis la départementalisation des territoires conquis ne font que renforcer la position nodale des acteurs économiques et financiers de la place. Au premier rang d’entre eux, François Briansiaux mobilise efficacement son important réseau de ...

Space-time dependent impulse response of a subcritical cylindrical reactor; Reponse impulsionnelle spatio-temporelle d'un reacteur cylindrique en regime sous-critique

Energy Technology Data Exchange (ETDEWEB)

Cazemajou, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

In this paper, a new formulation of the spatial dependent impulse response of a subcritical reactor in a cylindrical geometry is proposed. An expression of the transfer function between a point source at the center of coordinates and the flux at a given point (r,z) is obtained by solving: by means of Laplace transform, the one group diffusion equation. In this transfer function, variables r and p (p being the Laplace variable) remain linked within a modified Bessel function. Taking the inverse Laplace transform is done by two different ways: - using the Mellin-Fourier method which separates variables r and t. This method makes it possible to establish that there is identity between the classical formulation and the new one. - using an inverse Laplace transform which keeps variables r and t linked. This method requires to approximate the inverse Laplace transform of the end factor. It is then possible to replace the radial harmonics modes series of the classical expression by a single function. This new formulation seems to be of particular interest when dealing with reactors of large size and lifetime. It is also interesting each time the harmonics play an important role. (author) [French] Dans le present rapport, on propose une nouvelle formulation de la reponse impulsionnelle spatio-temporelle d'un reacteur sous-critique, en geometrie cylindrique. Une expression de la fonction de transfert entre une source ponctuelle placee au centre des coordonnees et le flux au point courant (r,z) est obtenue en resolvant, par transformation de Laplace, l'equation de la diffusion a un seul groupe d'energie. Dans cette fonction de transfert, les variables r et p (variable de Laplace) demeurent groupees dans une fonction de Bessel modifiee. Le retour a l'original est effectue de deux manieres: - la methode de Mellin-Fourier qui separe les variables r et t, permet d'etablir l'identite entre la nouvelle formulation et la formulation classique. - un original conservant les variables

Etude de la propagation sous critique dans les fibres de verre par relaxation de la charge

OpenAIRE

R'Mili , M.; Godin , N.; Lamon , J.

2011-01-01

International audience; Plusieurs fibres inorganiques de type verre ou céramique (à base de carbure de silicium) sont très sensibles à la propagation sous critique de fissures, activée chimiquement ou thermiquement. Dans ce cas la rupture survient d'une façon prématurée à un niveau de contrainte relativement bas comparé à la contrainte de rupture. Cet article propose une approche statistique de la rupture en fatigue statique fondée sur l'analyse de la rupture des fibres dans une mèche sollici...

Physicochemical and microbiological changes during the refrigerated storage of lamb loins sous-vide cooked at different combinations of time and temperature.

Science.gov (United States)

Roldán, Mar; Antequera, Teresa; Hernández, Alejandro; Ruiz, Jorge

2015-10-01

This study aimed to determine the influence of cooking temperature (either 60 ℃ or 80 ℃) and time (6 h or 24 h) on the physicochemical (weight loss, moisture content, instrumental color, instrumental texture, lipid and protein oxidation) and microbiological changes underwent by sous-vide cooked lamb loins during refrigerated storage for 30 days. There was a slight trend to decreasing weight losses in some of the cooking treatments, but only in samples cooked at 60 ℃ for 6 h it was paralleled with an increase in moisture content. The only noteworthy oxidative change was a marked decrease in conjugated dienes after two weeks of storage in samples cooked at 80 ℃ for 24 h. Neither instrumental texture nor color showed noticeable variations during the storage. Microbial population remained quite low during the whole refrigerated storage. Overall, most of the studied parameters showed only scarce changes throughout 30 days of refrigerated storage that most likely would not influence the quality of sous-vide cooked loin lambs. © The Author(s) 2014.

A study of the behaviour of irradiated or unirradiated grafts in the camera aquosa of irradiated and unirradiated animals; Etude du comportement d'un greffon irradie ou non, transplante dans la chambre anterieure de l'oeil d'un animal irradie ou non

Energy Technology Data Exchange (ETDEWEB)

Djalali-Behzad, G. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1969-06-01

Following grafts of new born mice spinal ganglia in the 'camera aquosa' of adult mice, the authors tried hematopoietic tissue grafts in the same conditions. The growth of iso-logous and hetero-logous bone marrow in the 'camera aquosa' showed that this tissue, even after exposure to supralethal doses, was capable of survival and growth. A counter-experiment with non irradiated bone marrow grafts in the 'camera aquosa' of rats delivered 700 rads led to the conclusion that the environment, intoxicated by exposure, acted on the graft so that after vascularization it became unable to grow. (author) [French] Apres avoir greffe des ganglions rachidiens de souriceaux nouveaux-nes dans la chambre anterieure de l'oeil de souris adultes, l'auteur a tente de greffer du tissu hematopoietique de la meme facon. La proliferation de la moelle osseuse isologue et heterologue, dans la chambre anterieure de l'oeil, lui a permis de mettre en evidence une certaine capacite de survie et de proliferation de ce tissu irradie meme a dose supraletale. Par une contre-experimentation, c'est-a-dire par la greffe de moelle non irradiee dans la chambre anterieure de rats irradies a 700 rads, il conclut que le milieu ambiant, intoxique par l'irradiation, agit sur le greffon de telle sorte que ce dernier, apres s'etre vascularise, devient depourvu de son aptitude de proliferation. (auteur)

The natural seismic hazard and induced seismicity of the european HDR (hot dry rock) geothermal energy project at Soultz-sous-Forets (Bas-Rhin, France); Alea sismique naturel et sismicite induite du projet geothermique europeen RCS (roche chaude seche) de Soultz-sous-Forets (Bas-Rhin, France)

Energy Technology Data Exchange (ETDEWEB)

Helm, J A

1996-06-07

Development of the Soultz-sous-Forets HDR (Hot Dry Rock) geothermal energy project will involve important fluid injections which will induce micro-seismic events. This thesis discusses the natural seismicity of the region and induced seismicity associated with fluid injections. A catalogue of all historical and instrument seismicity of the Soultz-sous-Forets (SSF) region has been compiled. This seismicity does not correspond to movements along the major tectonic features of the region. The area around SSF has been identified as being one where high heat flow corresponds to low seismicity. The largest well documented seismic event in the region which took place in 1952 had an epicentral intensity of VI. All important data pertaining to the series of seismic events which took place in the region from August to October 1952 have been collected and are presented. This work details the installation and operation of a permanent 3 station network of accelerometers and seismometers around the HDR site. Also the installation and operation of a mobile network of vertical seismometers during fluid injections. 167 micro-seismic events were recorded on the surface network, with magnitudes from -0.5 to 1.9. The preferential alignment of the micro-seismic cloud is N160 deg. Individual focal mechanisms of the larger seismic events correspond to an extensional tectonic regime. Stress inversion of P wave polarities indicates that the maximum stress is vertical and the intermediate and minimum stress axes horizontal. The largest of the horizontal stresses is orientated N124 deg and the smallest N34 deg. Induced seismic movement is taking place on pre-existing fractures controlled by the in situ stress seismic movement is taking place on pre-existing tectonic fractures controlled by the in situ stress field, and the largest of the induced events had a magnitude 1.9. This level of seismicity does not pose any environmental hazard to the region around Soultz-sous-Forets. (author) 151

Machine for extrusion under vacuum; Machine de fluage sous vide

Energy Technology Data Exchange (ETDEWEB)

Gautier, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

In a study of the behaviour of easily oxidised metals during the extrusion process, it is first necessary to find an effective mean of fighting corrosion, since this, even when barely detectable, has an important influence on the validity of the results recorded. The neatest and also the most efficient of all the methods tried consists in creating a vacuum around the test piece. Working on this principle, and at the same time respecting the conventional rules for extrusion tests (loading the sample after stabilisation at the testing temperature, differential measurements of lengthening, etc.) we found it necessary to construct an original machine. (author) [French] L'etude du comportement au fluage des materiaux facilement oxydables exige, en premier lieu, une lutte efficace contre la corrosion qui, meme a peine decelable, prend une part preponderante quant a la validite des resultats enregistres. La solution la plus elegante, et, a vrai dire, la plus energique parmi toutes les methodes essayees, consiste a realiser le vide autour de l'eprouvette d'essai. Partant de ce principe, et pour sauvegarder les regles classiques de l'essai de fluage (mise en charge de l'eprouvette apres stabilisation en temperature d'essai, mesures differentielles des allongements, etc.) nous nous sommes trouves dans la necessite de construire une machine inedite. (auteur)

Influence of Sous Vide and water immersion processing on polyacetylene content and instrumental color of parsnip (Pastinaca sativa) disks.

Science.gov (United States)

Rawson, Ashish; Koidis, Anastasios; Rai, Dilip K; Tuohy, Maria; Brunton, Nigel

2010-07-14

The effect of blanching (95 +/- 3 degrees C) followed by sous vide (SV) processing (90 degrees C for 10 min) on levels of two polyacetylenes in parsnip disks immediately after processing and during chill storage was studied and compared with the effect of water immersion (WI) processing (70 degrees C for 2 min.). Blanching had the greatest influence on the retention of polyacetylenes in sous vide processed parsnip disks resulting in significant decreases of 24.5 and 24% of falcarinol (1) and falcarindiol (2) respectively (p processing did not result in additional significant losses in polyacetylenes compared to blanched samples. Subsequent anaerobic storage of SV processed samples resulted in a significant decrease in 1 levels (p levels was observed (p > 0.05). 1 levels in WI processed samples were significantly higher than in SV samples (p processing with losses of up to 70% occurring after 5 days storage. 1 type polyacetylene undergoes degradation such as oxidation, dehydrogenation when thermally treated forming oxidized form of 1 type molecules, in this case falcarindione, dehydrofalcarinol, dehydrofalcarinone. Thermal processing had a significant effect on instrumental color of parsnip samples compared to minimally processed in both SV and WI processed samples resulting in parsnip disks becoming darker, yellower and browner following processing and storage.

Le besoin de réassurance : de la psychologie au comportement du consommateur Une investigation théorique appliquée au cas de la consommation alimentaire moderne

Directory of Open Access Journals (Sweden)

Wejdene Yanhui

2015-03-01

Ce travail, dont l’intérêt est essentiellement théorique, s’inscrit parmi les travaux rares introduisant le besoin de réassurance dans l’étude du comportement du consommateur. Des travaux futurs peuvent se baser sur cette conceptualisation pour identifier les déterminants de ce besoin.

Low content uranium alloys for nuclear fuels; Alliages d'uranium a faible teneur pour elements combustibles

Energy Technology Data Exchange (ETDEWEB)

Aubert, H.; Laniesse, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

A description is given of the structure and the properties of low content alloys containing from 0.1 to 0.5 per cent by weight of Al, Fe, Cr, Si, Mo or a combination of these elements. A study of the kinetics and of the mode of transformation has made it possible to choose the most satisfactory thermal treatment. An attempt has been made to prepare alloys suitable for an economical industrial development having a small {alpha} grain structure without marked preferential orientation, with very fine and stable precipitates as well as a high creep-resistance. The physical properties and the mechanical strength of these alloys are given for temperatures of 20 to 600 deg C. These alloys proved very satisfactory when irradiated in the form of normal size fuel elements. (authors) [French] Sont decrits la structure et les proprietes d'alliages a faible teneur, contenant de 0,1 a 0,5 pour cent en poids de Al, Fe, Cr, Si, Mo ou une combinaison de ces elements. L'etude des cinetiques et du mode de transformation permet de choisir le traitement thermique le plus favorable. On a cherche a mettre, au point des alliages se pretant a une mise en oeuvre industrielle economique et presentant une structure a petits grains {alpha}, sans orientation preferentielle marquee, avec des precipites tres fins et stables ainsi qu'une bonne resistance au fluage. Les proprietes physiques et la resistance mecanique de ces alliages sont decrites entre la temperature ambiante et 600 deg C. Irradies sous forme d'elements combustibles de dimensions normales, ces alliages ont montre un bon comportement. (auteurs)

Low content uranium alloys for nuclear fuels; Alliages d'uranium a faible teneur pour elements combustibles

Energy Technology Data Exchange (ETDEWEB)

Aubert, H; Laniesse, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

A description is given of the structure and the properties of low content alloys containing from 0.1 to 0.5 per cent by weight of Al, Fe, Cr, Si, Mo or a combination of these elements. A study of the kinetics and of the mode of transformation has made it possible to choose the most satisfactory thermal treatment. An attempt has been made to prepare alloys suitable for an economical industrial development having a small {alpha} grain structure without marked preferential orientation, with very fine and stable precipitates as well as a high creep-resistance. The physical properties and the mechanical strength of these alloys are given for temperatures of 20 to 600 deg C. These alloys proved very satisfactory when irradiated in the form of normal size fuel elements. (authors) [French] Sont decrits la structure et les proprietes d'alliages a faible teneur, contenant de 0,1 a 0,5 pour cent en poids de Al, Fe, Cr, Si, Mo ou une combinaison de ces elements. L'etude des cinetiques et du mode de transformation permet de choisir le traitement thermique le plus favorable. On a cherche a mettre, au point des alliages se pretant a une mise en oeuvre industrielle economique et presentant une structure a petits grains {alpha}, sans orientation preferentielle marquee, avec des precipites tres fins et stables ainsi qu'une bonne resistance au fluage. Les proprietes physiques et la resistance mecanique de ces alliages sont decrites entre la temperature ambiante et 600 deg C. Irradies sous forme d'elements combustibles de dimensions normales, ces alliages ont montre un bon comportement. (auteurs)

Results of the irradiation of mixed UO{sub 2} - PuO{sub 2} oxide fuel elements; Resultats d'irradiation d'elements combustibles en oxyde mixte UO{sub 2} - PuO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Mikailoff, H; Mustelier, J P; Bloch, J; Ezran, L; Hayet, L [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1966-07-01

In order to study the behaviour of fuel elements used for the first charge of the reactor Rapsodie, a first batch of eleven needles was irradiated in the reactor EL3 and then examined. These needles (having a shape very similar lo that of the actual needles to be used) were made up of a stack of sintered mixed-oxide pellets: UO{sub 2} containing about 10 per cent of PuO{sub 2}. The density was 85 to 97 per cent of the theoretical, value. The diametral gap between the oxide and the stainless steel can was between 0,06 and 0,27 mm. The specific powers varied from 1230 to 2700 W/cm{sup 3} and the can temperature was between 450 and 630 C. The maximum burn-up attained was 22000 MW days/tonne. Examination of the needles (metrology, radiography and {gamma}-spectrography) revealed certain macroscopic changes, and the evolution of the fuel was shown by micrographic studies. These observations were used, together with flux measurements results, to calculate the temperature distribution inside the fuel. The volume of the fission gas produced was measured in some of the samples; the results are interpreted taking into account the temperature distribution in the oxide and the burn-up attained. Finally a study was made both of the behaviour of a fuel element whose central part was molten during irradiation, and of the effect of sodium which had penetrated into some of the samples following can rupture. (author) [French] Afin d'etudier le comportement des elements combustibles destines a la premiere charge du reacteur Rapsodie, une premiere serie de onze aiguilles a ete irradiee dans le reacteur EL3 et examinee apres irradiation. Ces aiguilles (aux caracteristiques geometriques tres proches de celles des aiguilles definitives) etaient constituees d'un empilement de pastilles frittees en oxyde mixte UO{sub 2} a 10 pour cent environ de PuO{sub 2}, dont la densite etait comprise entre 85 et 97 pour cent de la densite theorique. Le jeu diametral entre l'oxyde et la gaine en acier

Modeling of the PWR fuel mechanical behaviour and particularly study of the pellet-cladding interaction in a fuel rod; Contribution a la modelisation du comportement mecanique des combustibles REP sous irradiation, avec en particulier le traitement de l`interaction pastille-gaine dans un crayon combustible

Energy Technology Data Exchange (ETDEWEB)

Hourdequin, N.

1995-05-01

In Pressurized Water Reactor (PWR) power plants, fuel cladding constitutes the first containment barrier against radioactive contamination. Computer codes, developed with the help of a large experimental knowledge, try to predict cladding failures which must be limited in order to maintain a maximal safety level. Until now, fuel rod design calculus with unidimensional codes were adequate to prevent cladding failures in standard PWR`s operating conditions. But now, the need of nuclear power plant availability increases. That leads to more constraining operating condition in which cladding failures are strongly influenced by the fuel rod mechanical behaviour, mainly at high power level. Then, the pellet-cladding interaction (PCI) becomes important, and is characterized by local effects which description expects a multidimensional modelization. This is the aim of the TOUTATIS 2D-3D code, that this thesis contributes to develop. This code allows to predict non-axisymmetric behaviour too, as rod buckling which has been observed in some irradiation experiments and identified with the help of TOUTATIS. By another way, PCI is influenced by under irradiation experiments and identified with the help of TOUTATIS which includes a densification model and a swelling model. The latter can only be used in standard operating conditions. However, the processing structure of this modulus provides the possibility to include any type of model corresponding with other operating conditions. In last, we show the result of these fuel volume variations on the cladding mechanical conditions. (author). 25 refs., 89 figs., 2 tabs., 12 photos., 5 appends.

Les comportements face au VIH/sida parmi les migrants originaires d'Afrique subsaharienne en Suisse : Enquête ANSWER 2013-2014

OpenAIRE

Simonson, t.; Dubois-Arber, F.; Jeannin, A.; Bodenmann, P.; Bize, R.

2015-01-01

L'enquête Internet ANSWER (African Net Survey WE Respond!) auprès des migrants provenant d'Afrique subsaharienne (ASS) a été menée entre septembre 2013 et février 2014, sur mandat de l'OFSP et avec la collaboration de l'ASS. Cette enquête s'inscrit dans le cadre du mandat de surveillance épidémiologique de deuxième génération du VIH et des autres IST auquel l'IUMSP participe activement. Le but de cette enquête a été de décrire dans cette population les connaissances, attitudes et comportement...

Machine for extrusion under vacuum; Machine de fluage sous vide

Energy Technology Data Exchange (ETDEWEB)

Gautier, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

In a study of the behaviour of easily oxidised metals during the extrusion process, it is first necessary to find an effective mean of fighting corrosion, since this, even when barely detectable, has an important influence on the validity of the results recorded. The neatest and also the most efficient of all the methods tried consists in creating a vacuum around the test piece. Working on this principle, and at the same time respecting the conventional rules for extrusion tests (loading the sample after stabilisation at the testing temperature, differential measurements of lengthening, etc.) we found it necessary to construct an original machine. (author) [French] L'etude du comportement au fluage des materiaux facilement oxydables exige, en premier lieu, une lutte efficace contre la corrosion qui, meme a peine decelable, prend une part preponderante quant a la validite des resultats enregistres. La solution la plus elegante, et, a vrai dire, la plus energique parmi toutes les methodes essayees, consiste a realiser le vide autour de l'eprouvette d'essai. Partant de ce principe, et pour sauvegarder les regles classiques de l'essai de fluage (mise en charge de l'eprouvette apres stabilisation en temperature d'essai, mesures differentielles des allongements, etc.) nous nous sommes trouves dans la necessite de construire une machine inedite. (auteur)

Results of the irradiation of mixed UO{sub 2} - PuO{sub 2} oxide fuel elements; Resultats d'irradiation d'elements combustibles en oxyde mixte UO{sub 2} - PuO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Mikailoff, H.; Mustelier, J.P.; Bloch, J.; Ezran, L.; Hayet, L. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1966-07-01

In order to study the behaviour of fuel elements used for the first charge of the reactor Rapsodie, a first batch of eleven needles was irradiated in the reactor EL3 and then examined. These needles (having a shape very similar lo that of the actual needles to be used) were made up of a stack of sintered mixed-oxide pellets: UO{sub 2} containing about 10 per cent of PuO{sub 2}. The density was 85 to 97 per cent of the theoretical, value. The diametral gap between the oxide and the stainless steel can was between 0,06 and 0,27 mm. The specific powers varied from 1230 to 2700 W/cm{sup 3} and the can temperature was between 450 and 630 C. The maximum burn-up attained was 22000 MW days/tonne. Examination of the needles (metrology, radiography and {gamma}-spectrography) revealed certain macroscopic changes, and the evolution of the fuel was shown by micrographic studies. These observations were used, together with flux measurements results, to calculate the temperature distribution inside the fuel. The volume of the fission gas produced was measured in some of the samples; the results are interpreted taking into account the temperature distribution in the oxide and the burn-up attained. Finally a study was made both of the behaviour of a fuel element whose central part was molten during irradiation, and of the effect of sodium which had penetrated into some of the samples following can rupture. (author) [French] Afin d'etudier le comportement des elements combustibles destines a la premiere charge du reacteur Rapsodie, une premiere serie de onze aiguilles a ete irradiee dans le reacteur EL3 et examinee apres irradiation. Ces aiguilles (aux caracteristiques geometriques tres proches de celles des aiguilles definitives) etaient constituees d'un empilement de pastilles frittees en oxyde mixte UO{sub 2} a 10 pour cent environ de PuO{sub 2}, dont la densite etait comprise entre 85 et 97 pour cent de la densite theorique. Le jeu diametral entre l'oxyde et la

Effet de pratiques de fertilisation azotée sur la sensibilité d’une culture de tomate à l’oïdium et la pourriture grise en conditions de production sous serre.

OpenAIRE

Ozayou, Saddik

2011-01-01

L’azote est le principal élément nutritif utilisé pour le contrôle des maladies aériennes sous abris. Dans ce stage, nous avons étudié l’effet de trois régimes de fertilisation azotée (4 mmoles/L, 8 mmoles/L et 16 mmoles/L) sur la physiologie de la plante et la sensibilité de la tomate à l’Oidium neolycopersici et à Botrytis cinerea en conditions de production sous serre. Pour ce faire, nous avons inoculé différents organes aériens des plantes dans la serre ou au laboratoire de l’INRA d’Alény...

Ecoulement et mise en structure de suspensions macroscopiques

Science.gov (United States)

Petit, L.

In this review, we report the various experimental studies performed on suspensions of solid particules in liquids, and concerning the rheological behaviour of such systems and the ordering of particules under the applied velocity fields. The number of materials which are flowing suspensions (reagents in chemical engineering, paints while spreading, blood flow, muds in oil reservoir) gave rise to a number of experimental studies, especially in the last twenty years. The results show a wide variety of behaviour, even for systems of intermediate concentration. In addition, even for identical systems, the results depend of the type of flow. Then, it is clear that, in addition of the standard parameters which are to be taken into account, it is necessary to consider the type of flow the suspension is submitted to. The flow influences the spatial distribution of the particules, leading to their ordering or migration. These ordering or motions influence the flow, and then, the rheological behaviour of the whole system. So, there is a feedback mechanism from the ordering to the flow, which explains the experimental observations. Nous reportons dans cette revue les différentes études expérimentales réalisées sur les suspensions de particules solides dans un liquide et qui concernent le comportement rhéologique de ces systèmes ainsi que les mouvements des particules sous l'effet des champs de vitesse imposés. Ces mouvements peuvent conduire soit à des mises en structure, ou encore à des migrations des particules. L'importance du nombre de matériaux qui se présentent sous forme de suspension et qui sont mis en écoulement (réactif en génie chimique, peintures lors de leur mise en place, écoulement sanguin, boues dans les forages pétroliers,...) a motivé un grand nombre de travaux expérimentaux plus fondamentaux sur le sujet, particulièrement dans les vingt dernières années. Les résultats correspondants montrent une très grande diversité des

Electron microscope study of irradiated beryllium oxide; Etude au microscope electronique de l'oxyde de beryllium irradie

Energy Technology Data Exchange (ETDEWEB)

Bisson, A A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-06-01

utilisant des echantillons frittes. Les fractures sont examinees sous differents aspects. Ce sont les frittes les plus denses a fractures intragranulaires qui sont les plus interessants pour l'etude microscopique. Le 'pore' resultant du frittage est differencie de la 'bulle' qui peut se former au cours de traitements thermiques ulterieurs par suite de reactions donnant naissance a des gaz. Apres irradiation, la fragilisation intergranulaire est importante. Par recuit, on suit l'evolution des gaz, produits par les reactions (n. 2n) et (n, {alpha}), qui s'accumulent aux joints de grains. L oxyde de beryllium irradie est ensuite etudie par transmission. Pour cela, une methode simple a ete mise au point; elle consiste a examiner les eclats de cristaux broyes. Les amas de defauts ponctuels, formes par les neutrons, sont ainsi mis en evidence dans les cristaux irradies aux trois doses suivantes: 6.10{sup 19}, 9.10{sup 19} et 2.10{sup 20} n{sub r}.cm{sup -2} a une temperature inferieure a 100 deg. C. Pour l'irradiation a 6.10{sup 19} n{sub r}.cm{sup -2} les defauts sont a peine visibles mais a 2.10{sup 20} n{sub r}.cm{sup -2} les cristaux sont cribles d'amas alors que les lignes de Kikuchi ont disparu des diagrammes de microdiffraction. L'evolution des amas de defauts en boucles de dislocation est etudiee par des recuits successifs. L'energie d'activation de 0.37 eV, calculee a partir des courbes de recuits, incite a penser que ce sont les defauts interstitiels qui se condensent en boucles de dislocation. Des echantillons irradies a haute temperature sont egalement etudies (650, 900 et 1100 deg. C). Dans ceux-ci les boucles de dislocation atteignent un etat d'equilibre different de celui des precedentes. Ces dernieres boucles de dislocation sont etudiees plus specialement et leur vecteur de Burgers est determine par microdiffraction. (auteur)

Cascade de photons dans les boîtes quantiques uniques

Science.gov (United States)

Robert, I.; Moreau, E.; Gérard, J. M.; Abram, I.

2002-06-01

Nous présentons l'observation expérimentale de l'émission squentielle de photons par une boîte quantique unique sous pompage optique continu ou pulsé. Cette cascade radiative produit des paires de photons corrélés qui sont émis suivant un ordre bien défini. En effet, la fonction de corrélation croisée entre les deux photons formant la paire présente une allure asymétrique, de type groupement ou dégroupement de photons, suivant l'ordre temporel de détection des deux photons. Prédit théoriquement en physique atomique, ce comportement asymétrique de la fonction de corrélation de second ordre est la signature de l'émission successive de photons.

Enquêtes, observations et analyse de l'activité auprès de conducteurs âgés : comprendre les obstacles pour mieux agir (parcours critique, positions théoriques et perspectives de recherche)

OpenAIRE

GABAUDE, Catherine

2016-01-01

Afin de préserver l'autonomie et la qualité de vie de nos aînés, il est indispensable de concilier des exigences de sécurité et de mobilité. L'action publique en sécurité routière peut être renouvelée en étant sensibilisée à la question de la sécurité gérée, c'est à dire en procédant à une logique de recherche des rationalités sous-jacentes aux comportements observés. Ceci nécessite d'étudier la sécurité en action à partir de l'analyse de l'activité de conduite de nos ainés. La plupart des co...

Part III: Comparing observed growth of selected test organisms in food irradiation studies with growth predictions calculated by ComBase softwares

International Nuclear Information System (INIS)

Farkas, J.; Andrassy, E.; Meszaros, L.; Beczner, J.; Polyak-Feher, K.; Gaal, O.; Lebovics, V.K.; Lugasi, A.

2009-01-01

As a result of intensive predictive microbiological modelling activities, several computer programs and softwares became available recently for facilitating microbiological risk assessment. Among these tools, the establishment of the ComBase, an international database and its predictive modelling softwares of the Pathogen Modelling Program (PMP) set up by the USDA Eastern Regional Research Center, Wyndmore, PA, and the Food Micromodel/Growth Predictor by the United Kingdom's Institute of Food Research, Norwich, are most important. The authors have used the PMP 6.1 software version of ComBase as a preliminary trial to compare observed growth of selected test organisms in relation to their food irradiation work during recent years within the FAO/IAEA Coordinated Food Irradiation Research Projects (D6.10.23 and D6.20.07) with the predicted growth on the basis of growth models available in ComBase for the same species as those of the authors' test organisms. The results of challenge tests with Listeria monocytogenes inoculum in untreated or irradiated experimental batches of semi-prepared breaded turkey meat steaks (cordon bleu), sliced tomato, sliced watermelon, sliced cantaloupe and sous vide processed mixed vegetables, as well as Staphylococcus aureus inoculum of a pasta product, tortellini, were compared with their respective growth models under relevant environmental conditions. This comparison showed good fits in the case of non-irradiated and high moisture food samples, but growth of radiation survivors lagged behind the predicted values. (author)

Patrimonialiser les bases de sous-marins et le Mur de l’Atlantique

Directory of Open Access Journals (Sweden)

Claude Prelorenzo

2011-06-01

Full Text Available Le Mur de l’Atlantique court de la frontière espagnole jusqu’au nord de la Norvège. Au sein de ce dispositif sont installées cinq bases de sous-marins : Dunkerque, Saint-Nazaire, Lorient, La Rochelle et Bordeaux. Après une période de purgatoire, liée aux souvenirs trop frais des bombardements qu’ils ont attirés sur les villes, les édifices du mur sont entrés dans la sphère de la culture et du tourisme. Nous posons alors la question suivante : de quoi ces édifices portent-ils témoignage, et nous envisageons plusieurs aspects : leur évident modernisme qui les situe à un moment de l’histoire de l’architecture, leur hétérogénéité qui fait de ces bâtiments des sortes d’ovni, sans aucun rapport ni d’échelle ni de forme avec l’architecture civile, une technique d’enfouissement et de camouflage génératrice d’un nouveau paysage. Mais ces édifices peuvent-ils être exonérés de leur but guerrier ? Quel est le message de leur recyclage dans le culturel, le festif ou le commercial ? Deux bases de sous-marins sont plus particulièrement présentées, celle de Saint-Nazaire et celle de Lorient.The Atlantic Wall stretches from the Spanish border to northern Norway. Within this system there are five bases for submarines: Dunkirk, Saint-Nazaire, Lorient, La Rochelle and Bordeaux. After a period of purgatory, with the painful memories of the wartime air raids which destroyed the cities around the bases, the buildings which the Atlantic Wall comprises have now entered the spheres of culture and tourism. What do these buildings bear witness to? Their frank modernism puts them at a precise moment in the history of architecture. Their heterogeneity makes them like UFOs, without any relation of scale or form to civil architecture. Their specific techniques of dissimulation and camouflage created new landscapes. But can these buildings be freed from the memories of their original military purpose? What message is

Les dossiers de pensions des troupes coloniales et indigènes. La sous-série GR 13 Yf 

OpenAIRE

HEISER, Sandrine; Guillot, Hélène

2013-01-01

En avril 2011, le Service historique de la Défense (SHD) a débuté le classement des dossiers de pensions des troupes coloniales et des troupes indigènes pour la période 1850-1950. 14 000 premiers dossiers ont été inventoriés, sur un total de 24 000, l’objectif étant d’achevé le classement pour le centenaire de la Grande Guerre. L’opération comporte également une phase importante de reconditionnement permettant une communication immédiate et idéale aux lecteurs au gré des mises à jour régulièr...

Thermal neutron flux measurements using neutron-electron converters; Mesure de flux de neutrons thermiques avec des convertisseurs neutrons electrons

Energy Technology Data Exchange (ETDEWEB)

Le Meur, R; Lecomte, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-07-01

The operation of neutron-electron converters designed for measuring thermal neutron fluxes is examined. The principle is to produce short lived isotopes emitting beta particles, by activation, and to measure their activity not by extracting them from the reactor, but directly in the reactor using the emitted electrons to deflect the needle of a galvanometer placed outside the flux. After a theoretical study, the results of the measurements are presented; particular attention is paid to a new type of converter characterized by a layer structure. The converters are very useful for obtaining flux distributions with more than 10{sup 7} neutrons cm{sup -2}*sec{sup -1}. They work satisfactorily in pressurized carbon dioxide at 400 Celsius degrees. Some points still have to be cleared up however concerning interfering currents in the detectors and the behaviour of the dielectrics under irradiation. (authors) [French] On examine le fonctionnement de convertisseurs neutrons electrons destines a des mesures de flux de neutrons thermiques. Le principe est de former par activation des isotopes a periodes courtes et a emission beta et de mesurer leur activite non pas en les sortant du reacteur, mais directement en pile, utilisant les electrons emis pour faire devier l'aiguille d'un galvanometre place hors flux. Apres une etude theorique, on indique des resultats de mesures obtenus, en insistant particulierement sur un nouveau type de convertisseur, caracterise par sa structure stratifiee. Les convertisseurs sont tres interessants pour tracer, des cartes de flux a partir de 10{sup 7} neutrons cm{sup -2}*s{sup -1}. Ils sont utilisables pour des flux de 10{sup 14} neutrons cm{sup -2}*s{sup -1}. Ils fonctionnent correctement dans du gaz carbonique sous pression a 400 C. Des points restent cependant a eclaircir concernant les courants parasites dans les detecteurs et le comportement des dielectriques pendant leur irradiation. (auteur)

Improvements to the properties of uranium by addition of small quantities of other metals; Ameliorations apportees a l'uranium par de faibles additions metalliques

Energy Technology Data Exchange (ETDEWEB)

Englander, M [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

{sup 235}. Dans les conditions optimales de fonctionnement, un meme materiau combustible doit alors fournir un minimum de 3000 MWj/t, soit 72.10{sup 6} kWh par tonne d'uranium naturel, tout en etant porte a une temperature suffisante pour jouer efficacement son role de source de chaleur (entre 350 et 550 deg. C minimum). Or d'une facon assez surprenante, les agregats polycristallins des billettes d'uranium obtenues par coulee sous vide, ou apres filage a haute temperature, se presentent comme un ensemble de grains tres grossiers, a contours dechiquetes et irreguliers, et comportent de nombreuses marques de deformation intragranulaire (macles, lignes de glissement), accompagnees de fortes sous-structures. En plus, le spectre de la dimension des grains s'etend de quelques microns a quelques millimetres, selon les plages micrographiques examinees. Sous irradiation a ces temperatures, l'uranium metallique pur en barreaux cylindriques de diametre de l'ordre du pouce, se deforme: il se produit des fissures dans la masse, des variations de dimensions longitudinales et transversales (qui se traduisent par des peaux d'orange), soit par croissances plus ou moins directionnelles, soit par deformations superficielles qui peuvent provoquer des ruptures du materiau, de sa gaine ou des fleches suffisamment importantes pour obstruer les canaux de refroidissement. Il a ete reconnu par la suite que cette instabilite, sous l'effet des contraintes thermiques d'origine nucleaire, est due a la morphologie heterogene de l'uranium et a sa structure cristalline anisotrope (U{sub {alpha}} ou U{sub {beta}}). (auteur)

Presence de Carbone-13 dans les elements combustibles de type (U,Pu)O 2 irradies en reacteur rapide

Science.gov (United States)

Kryger, Bernard; Hagemann, Robert

1982-06-01

Du carbone-13 produit par la réaction de capture neutronique 168O + 10n → 136C + 42He se forme dans les combustibles de type oxyde irradiés en neutrons rapides. Cette réaction, dont le seuil d'énergie se situe à 2.35 MeV, conduit à la formation d'une quantité de carbone-13 qui peut varier notablement suivant le spectre neutronique du réacteur (entre 20 et 40 × 10 -6g 13C/g (U,Pu)O 2 pour une fluence de 2 × 10 23 n/cm 2). DES mesures effectuées sur le combustible et la gaine par spectrométrie de masse après irradiation montrent qu'une fraction égale ou supérieure à la moitié du carbone-13 produit dans l'oxyde peut être transférée dans la gaine. Un tel comportement nous fait considérer le carbone-13 comme un véritable marqueur du carbone plus généralement contenu dans l'oxyde et, à ce titre, la détection de cet isotope devrait contribuer à élucider tout particulièrement les mécanismes de carburation de la gaine par les combustibles (U,Pu)O 2 des réacteurs surgénérateurs.

Modifications by {gamma} irradiation of polyethylene at very high molecular weight. Tribological behaviour for orthopedic applications; Modifications par irradiation {gamma} du polyethylene a tres haut poids moleculaire. Comportement tribologique pour des applications orthopediques

Energy Technology Data Exchange (ETDEWEB)

Chaix, N

2001-07-01

A new mode of sterilization by vacuum gamma irradiation is studied. This new mode improves significantly the polyethylene behaviour during the study in friction-corrosion against a stainless steel-316L sphere. (N.C.)

Shelf Life of Chicken Meat Balls Submitted to Sous Vide Treatment

Directory of Open Access Journals (Sweden)

ÖP Can

2015-06-01

Full Text Available The objective of this study was to investigate the appropriate temperature for processing storage of chicken meatballs made of minced chicken meat with the sous vide method. The chicken meatballs were prepared and separated into four experimental groups according to the application of heat treatment (10 and 20 minutes and storage time (+2 and +10°C. Sensory, microbiological (total aerobic mesophilic bacteria, total psychrotrophs, lactic acidbacteria, Enterobacteriaceae, Clostridiumperfringens, Listeria spp., chemical (pH, thiobarbituric acid, color (L*, a*, b* values, and texture profile analyses were performed on meatball samples. Cl. perfringens and Listeria spp. were not detected in meatball samples during the storage period. Samples cooked at 10 minute and stored at +2°C the highest count of total aerobic mesophilic bacteria (p<0.05. For lipid oxidation, interaction was observed between cooking time and storage temperature, with higher TBARs values for samples stored at 10 °C, while cooking time and storage temperature showed no influence on the color and textural analysis parameters. For the treatments evaluated, cooking time x storage temperature seem affect more microbiological and chemical parameters than color and textural parameters of chicken meatballs.

Physical properties of beryllium oxide - Irradiation effects; Proprietes physiques et caracteristiques mecaniques de l'oxyde de beryllium fritte - Effet de l'irradiation et guerison

Energy Technology Data Exchange (ETDEWEB)

Elston, J; Caillat, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

This work has been carried out in view of determining several physical properties of hot-pressed beryllium oxide under various conditions and the change of these properties after irradiation. Special attention has been paid on to the measurement of the thermal conductivity coefficient and thermal diffusivity coefficient. Several designs for the measurement of the thermal conductivity coefficient have been achieved. They permit its determination between 50 and 300 deg. C, between 400 and 800 deg. C. Some measurements have been made above 1000 deg. C. In order to measure the thermal diffusivity coefficient, we heat a perfectly flat surface of a sample in such a way that the heat flux is modulated (amplitude and frequency being adjustable). The thermal diffusivity coefficient is deduced from the variations of temperature observed on several spots. Tensile strength; compressive strength; expansion coefficient; sound velocity and crystal parameters have been also measured. Some of the measurements have been carried out after neutron irradiation. Some data have been obtained on the change of the properties of beryllium oxide depending on the integrated neutron flux. (author)Fren. [French] L'objet de cette etude est la determination de plusieurs proprietes physiques de l'oxyde de beryllium fritte sous charge dans differentes conditions et l'evolution de ces proprietes apres irradiation. Une attention particuliere a ete portee sur la mesure de la conductibilite et de la diffusivite thermiques. Differents montages ont ete realises pour mesurer la conductibilite thermique. Ils permettent la determination entre 50 et 300 deg. C, entre 400 et 800 deg. C; quelques mesures ont ete faites au-dessus de 1000 deg. C. Pour la mesure du coefficient de diffusivite thermique, on realise une attaque thermique, de frequence et d'amplitude reglables d'une face parfaitement plane d'un echantillon d'oxyde de beryllium. Les variations de temperature sont ovees en plusieurs points, on en

Caractérisation physico-chimique de boues d’unité de production d’eau potable Physico-chemical characterization of sludge from a unit water drinking production

Directory of Open Access Journals (Sweden)

Mostahsine S.

2012-09-01

Full Text Available La composition chimique des boues hydroxydes, sous-produit de la potabilisation de l’eau est constituée majoritairement d’hydroxydes d’aluminium et de silice, les hydroxydes de Fer, de calcium, de potassium et de magnésium dont le taux peut varier sensiblement selon les périodes de prélèvement des eaux brutes et peut conférer à la boue des propriétés physico-chimiques intéressantes. La composition minéralogique des boues peut également comporter un solidifiant tel que les silicates de calcium. L’observation au MEB de ces boues hydroxydes montre une phase amorphe sous forme de flocons dont la géométrie est mal définie et emprisonnant de petits cristaux de quartz et de muscovite. Ces observations sont en corrélation avec les principales phases minérales mises en évidence dans les essais de diffraction des rayons X. L’étude du comportement thermique des boues, notamment celui de la déshydroxylation et les transformations de phases sont situées dans un intervalle de température compris entre 300 et 800°C. Ces transformations thermiques sont caractérisées par plusieurs méthodes analytiques (DSC, DRX et infrarouge. Les nouvelles phases cristallisées sont sous différentes formes de solutions solides du type (Ca, Al, Si, Fe, K, Mg. Chemical composition of the Hydroxides sludge, by-product of treatment of drinking water, are composed mainly of silica and the hydroxides of aluminium, the ratio of the hydroxides of iron, calcium, potassium and magnesium fluctuate appreciably according to the periods of taking away raw waters, and could confer to the sludge interesting physico-chemical properties. The mineralogical composition of the sludge may also contain a solidifying component such as calcium silicate. The MEB observation shows an amorphous phase in the form of flakes whose geometry is badly defined and imprisoning small muscovite and quartz crystals. These observations are in correlation with principal mineral

Al-Ḥudayyda sous occupation ottomane (1849-1918

Directory of Open Access Journals (Sweden)

Patrice Chevalier

2011-12-01

Full Text Available Petit port de pêche situé sur les côtes de la mer Rouge, al-Ḥudayyda change progressivement de statut et de dimensions avec l’arrivée de l’armée ottomane en 1839. Al-Ḥudayyda se voit alors choisi comme l’un des points stratégiques (militaire et politique du dispositif colonial ottoman.Grâce aux différentes infrastructures mises en place par l’administration ottomane, mais aussi grâce à l’ouverture du canal de Suez en 1869, le village attire peu à peu une population multi-ethnique et cosmopolite venue y commercer ou simplement y trouver refuge, dans un contexte politique régional passablement agité. D’une centaine de Yéménites à l’origine, il compte 42 000 âmes à la veille de la première guerre mondiale.La cohabitation sous administration ottomane va-t-elle générer ou non des échanges ou emprunts entre les différentes communautés ? Les Ottomans vont-ils réussir à transcender les multiples appartenances identitaires au profit d’une appartenance citoyenne à l’empire, comme le prévoit leur ambitieux programme de réformes ? La ville d’al- Ḥudayyda sera-t-elle dotée d’une identité spécifique suffisamment forte pour que les individus appartenant aux différentes communautés présentes s’identifient à la ville ? Voilà quelques-unes des questions auxquelles cet article tente de répondre.

Radiation enhanced thermal diffusion of chlorine in uranium dioxide; Diffusion thermique et sous irradiation du chlore dans le dioxyde d'uranium

Energy Technology Data Exchange (ETDEWEB)

Pipon, Yves [Ecole doctorale de physique et d' astrophysique, Universite Claude Bernard Lyon-I, Lyon (France)

2006-12-15

This work concerns the study of the thermal and radiation enhanced diffusion of {sup 36}Cl in uranium dioxide. It is a contribution to PRECCI programme (research programme on the long-term behaviour of the spent nuclear fuel). {sup 36}Cl is a long lived volatile activation product (T = 300 000 years) able to contribute significantly to the instant release fraction in geological disposal conditions. We simulated the presence of {sup 36}Cl by implanting a quantity of {sup 37}Cl comparable to the impurity content of chlorine in UO{sub 2}. In order to evaluate the diffusion properties of chlorine in the fuel and in particular to assess the influence of the irradiation defects, we performed two kinds of experiments: - the influence of the temperature was studied by carrying out thermal annealings in the temperature range 900 - 1300 deg. C; we showed that implanted chlorine was mobile from temperatures as low as 1000 deg. C and determined a thermal diffusion coefficient D{sub 1000} {sub deg.} {sub C} around 10{sup -16} cm{sup 2}s{sup -1} and deduced an activation energy of 4.3 eV. This value is one of lowest compared to that of volatile fission products such as iodine or the xenon. These parameters reflect the very mobile behaviour of chlorine; - the irradiation effects induced by fission products were studied by irradiating the samples with {sup 127}I (energy of 63.5 MeV). We showed that the implanted chlorine diffusion in the temperature range 30 - 250 deg. C is not purely athermal. In these conditions, the diffusion coefficient D{sub 250} {sub deg.} {sub C} for the implanted chlorine is around 10{sup -14} cm{sup 2}s{sup -1} and the activation energy is calculated to be 0.1 eV. Moreover, at 250 deg. C, we observed an important transport of the pristine chlorine from the bulk towards the surface. This chlorine comes from a zone where the defects are mainly produced by the nuclear energy loss process at the end of iodine range. We showed the importance of the

Comportement mécanique des cavités dans le sel. Etat actuel de nos connaissances Mechanical Behaviour of Salt Cavities. Present State of Our Knowledge

Directory of Open Access Journals (Sweden)

Boucly P.

2006-11-01

Full Text Available L'utilisation depuis dix ans des premières cavités salines créées sur le site de Tersanne s'est accompagnée d'une réduction de leur volume relativement importante. Cette observation a conduit le Gaz de France à développer d'importantes études sur le comportement rhéologique du sel dans lequel sont creusées les cavités. Ces études, effectuées en collaboration avec des laboratoires universitaires, ont consisté en de nombreux essais en laboratoire (essais de longue durée à la température des terrains visant à déterminer les lois de comportement du matériau. Parallèlement, des modèles de calcul de divers degrés de complexité ont été élaborés afin de prendre en compte ces lois dans l'estimation de la stabilité et de la tenue à long terme de la cavité. Ces études ont abouti récemment à la mise au point d'un premier modèle de comportement du sel qui rend compte de l'ensemble des observations effectuées à ce jour sur les cavités. Grâce à ce modèle, il est maintenant possible d'étudier quelle influence a sur leur volume un type d'utilisation donné des cavités. The exploitation over the last ten years of the first salt cavities created in the Tersanne area has resulted in a relatively large decrease in their volume. This observation led Gaz de France to do extensive research on the rheological behavior of the salt into which cavities are leached. This research, performed in cooperation with university laboratories, consisted of numerous laboratory tests (long-duration tests at formation temperatures to determine the behavior laws of the material. At the same time, models for computing different degrees of complexity were developed to take these laws into account in evaluating the stability and long-term resistance of the cavity. This research has recently resulted in the development of an initial salt-behavior model involving all the observations made concerning these cavities to date. This model can now be

Early Post-Irradiation Changes in the Metabolism of Biogenic Amines; Les Changements Precoces du Metabolisme des Amines Biogenes apres Irradiation

Energy Technology Data Exchange (ETDEWEB)

Deanovic, Z [Institut Rudjer Boskovic, Zagreb, Yugoslavia (Croatia)

1971-03-15

There is accumulating evidence for the radiation-induced release of biogenic amines from their body stores. Having in mind the high patho-physiological activity of these ''local'' hormones and ''neuro-hormones'', it is reasonable to assume that they play an important role in the pathogenesis of the acute radiation syndrome. Under these pathological conditions the possible synergic and antagonistic effects of biogenic amines due to their complex interactions must be taken into consideration. The extent and dose-dependence of post-irradiation changes in the metabolism of histamine, serotonin, catecholamines and acetylcholine will be examined regarding particularly the search for biochemical indicators of radiation injury. The determination of bio-amines and their metabolites in urine seems to be a suitable method for following up those metabolic changes which could be of a biodosimetrical and/or prognostical value. Data published on this subject, obtained in experimental animals as well as in man, have been reviewed and the applicability of these tests is discussed. (author) [French] Des preuves se sont accumulees, qui demontrent que les amines biogenes sont liberees de leurs depots sous l'effet des rayonnements ionisants. Etant donne la grande activite pathophysiologique de ces hormones 'locales' et 'neurohormones', il est raisonnable de considerer que ces substances biogenes jouent un role important dans la pathogenese du syndrome aigu d'irradiation. Dans ces conditions pathologiques il faut tenir compte des effets synergiques et antagonistes des bio-amines, lies a des interactions compliquees. Les changements metaboliques en fonction de la dose recue font l'objet d'un examen qui englobe les alterations quantitatives de .'histamine, de la serotonine, des catecholamines et de l'acetylcholine et dont l'objectif est la recherche sur des indicateurs biochimiques de la lesion provoquee par l'irradiation. L'analyse des bio-amines et de leurs metabolites dans les urines

Les images en géographie sous l’angledes humanités numériques

Directory of Open Access Journals (Sweden)

Gaëlle Hallair

2009-04-01

Full Text Available L’article présente une méthodologie pour conserver, stocker, inventorier, archiver, numériser, indexer, valoriser et diffuser des archives géographiques sous l’angle des Digital humanities. L’article applique cette méthodologie aux images en géographie avant de présenter un projet de plate-forme documentaire concernant les plaques de verres du fonds Emmanuel de Martonne hébergées actuellement par l’UMR CNRS 8586 PRODIG.This article points out the methodology of Digital humanities to preserve, to stock, to make an inventory, to digitize, to index, to enhance the value und to spread geographical archives. It applies this methodology to geographical visual documents and presents a database project about photographic plates of the Emmanuel de Martonne’s collection localised in the research center PRODIG (UMR CNRS 8586.

18 octobre 2013 - Le Préfet de l’Ain L. Touvet signe le livre d'or avec le Directeur général du CERN R. Heuer et le Chef du Département Technologie F. Bordry. Photo de groupe, de gauche à droite: T. Kupisz, Secrétaire général de la sous préfecture de Gex; L. Miralles, Chef du Département Infrastructure et services généraux; F. Eder, Délégué aux Relations avec les Etats hôtes; S. Donnot, Sous-préfet de Gex; L. Touvet, Préfet de l'Ain; E. Sches, Sous-préfète de Nantua; E.Gröniger-Voss, Conseiller juridique du CERN; R. Heuer, Directeur général; F. Bordry, Chef du Département Technologie et P. Bloch, Chef du Département Physique.

CERN Multimedia

Anna Pantelia

2013-01-01

18 octobre 2013 - Le Préfet de l’Ain L. Touvet signe le livre d'or avec le Directeur général du CERN R. Heuer et le Chef du Département Technologie F. Bordry. Photo de groupe, de gauche à droite: T. Kupisz,\tSecrétaire général de la sous préfecture de Gex; L. Miralles, Chef du Département Infrastructure et services généraux; F. Eder, Délégué aux Relations avec les Etats hôtes; S. Donnot, Sous-préfet de Gex; L. Touvet, Préfet de l'Ain; E. Sches, Sous-préfète de Nantua; E.Gröniger-Voss, Conseiller juridique du CERN; R. Heuer, Directeur général; F. Bordry, Chef du Département Technologie et P. Bloch, Chef du Département Physique.

Fuel elements for pressurised-gas reactors; Elements combustibles des piles a gaz sous pression

Energy Technology Data Exchange (ETDEWEB)

Stohr, J A; Englander, M; Gauthron, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

The design and fabrication of fuel elements for the first CO{sub 2} pressurized reactors have induced to investigate: various cladding materials, natural uranium base fuels, canning processes. The main analogical tests used in connection with the fuel element study are described. These various tests have enabled, among others, the fabrication of the fuel element for the EL2 reactor. Lastly, future solutions for electrical power producing reactors are foreseen. (author)Fren. [French] L'etude et la realisation d'elements combustibles pour les premieres piles a CO{sub 2} sous pression ont conduit a examiner: les divers materiaux de gaine, les combustibles a base d'uranium naturel, les modes de gainage. Les principaux essais analogiques ayant servi au cours de l'etude de la cartouche sont decrits. Ces divers essais ont notamment permis la realisation de la cartouche de la pile EL2. Enfin sont envisagees les solutions futures pour les piles productrices d'energie electrique. (auteur)

Registration of vehicles at the Gex sous-préfecture: now by appointment only

CERN Multimedia

2016-01-01

The Gex sous-préfecture has informed CERN that it has taken the following steps in order to reduce waiting times at its counters for the issue of carte grise vehicle registration certificates. As of 1 February 2016, you must book an appointment via the website http://www.rdv.ain.gouv.fr/ for all services relating to the registration of vehicles, in particular the:   change of the holder of a registration certificate, issue of a certificat de situation administrative (administrative status certificate required for the sale of a vehicle), change of marital status (or company name in the case of legal entities), change of address, change in the technical specification of the vehicle, corrections to registration certificates, equests for duplicates (loss or theft of registration certificates), registration of a diplomatic vehicle (CERN), registration of a new vehicle, registration of vehicles purchased tax-free in the Pays de Gex free zone (formerly TTW series), and import of vehicles (from ...

The gaseous emission of polymers under swift heavy ion irradiation: effect of the electronic stopping power; L'emission gazeuse des polymeres aliphatiques sous irradiation: effet du pouvoir d'arret electronique

Energy Technology Data Exchange (ETDEWEB)

Picq, V

2000-07-01

This thesis contributes to a better understanding of the damaging processes, which occur in polymers under swift heavy ion irradiation. The present study is exclusively devoted to the influence of the electronic stopping power, (dE/dx)e, on the molecular emission under irradiation. The irradiated polymers are polyethylene, polypropylene and poly-butene. The (dE/dx)e of the projectiles used varies from 3.5*10{sup -3} MeV.mg{sup -1}.cm{sup 2} (electron) to 39 MeV.mg{sup -1}.cm{sup 2} ({sup 58}Ni). We used two different experimental approaches in order to identify the nature of the emitted gases: mass spectrometry and infrared spectroscopy. The first technique is non selective, therefore, we could detect the emission of H{sub 2} and heavy molecules; it also gives information on the diffusion kinetics of the molecules formed. The use of infrared spectroscopy for this kind of analysis is new and the technique was developed at the laboratory. It enables us to identify, without any ambiguity, molecules with up to three carbon atoms. The experimental spectra are analysed by using reference spectra of pure gases, measured in our laboratory. We have quantified precisely each identified gas, and we have followed the evolution of the radiochemical yields with increasing (dE/dx)e. The results, obtained at different (dE/dx)e, inform us on the different mechanisms of gas molecules formation, for example the side group departure and, at high (dE/dx)e, the fragmentation of the main chain which is due to multiple ionisation of the macromolecule. (author)

Internet use during childhood and the ecological techno-subsystem

Directory of Open Access Journals (Sweden)

Genevieve Marie Johnson

2008-12-01

Full Text Available Research findings suggest both positive and negative developmental consequences of Internet use during childhood (e.g., playing video games have been associated with enhanced visual skills as well as increased aggression. Several studies have concluded that environmental factors mediate the developmental impact of childhood online behaviour. From an ecological perspective, we propose the techno-subsystem, a dimension of the microsystem (i.e., immediate environments. The techno-subsystem includes child interaction with both living (e.g., peers and nonliving (e.g., hardware elements of communication, information, and recreation technologies in direct environments. By emphasizing the role of technology in child development, the ecological techno-subsystem encourages holistic exploration of the developmental consequences of Internet use (and future technological advances during childhood. L’usage d’Internet chez les enfants et le sous-système Techno écologique Résumé : Les résultats de recherche semblent indiquer que l’usage d’Internet chez les enfants aurait des conséquences développementales qui soit à la fois positives et négatives (ex. : l’usage des jeux vidéo auraient été associés à un accroissement des habileté visuelles ainsi qu’à un accroissement de l’agressivité. Plusieurs études ont aussi conclue que l’impact du comportement des enfants quand il sont en ligne sur leur développement serait affecté par des facteurs environnementaux. Dans une perspective écologique, nous proposons le sous-système Techno, une dimension du microsystème (ex :. les environnements immédiats. Le sous-système Techno comprend l’interaction de l’enfant avec des éléments vivants (e. : les paires et non vivants (ex; les ordinateurs de communication, d’information et de technologie de jeux dans des environnements directes.

SIMULATION ET MODELISATION DE LA VARIATION DE LA MOBILITE DE HALL DES PHOTOELECTRONS EN FONCTION DE LA TEMPERATURE DANS LES CRISTAUX DE n-ZnSe :Zn IRRADIES AVEC DES ELECTRONS ENERGETIQUES

Directory of Open Access Journals (Sweden)

D DJOUADI

2007-12-01

Full Text Available Dans l’intervalle de températures [77..300 K] a été mesurée la mobilité de Hall des électrons d’équilibre et des photoélectrons dans les cristaux de n-ZnSe :Zn irradiés avec un faisceau d’électrons d’énergie E=1,3 MeV et dont la dose d’irradiation varie entre 2,73 1016 et 5.19 1017 électrons/cm2 . Le comportement de la mobilité des photoélectrons s’explique parfaitement dans le cadre d’un modèle à deux-barrières d’un semi-conducteur inhomogène représentant une matrice faiblement ohmique contenant des inclusions fortement ohmiques (clusters. En se basant sur les théories de Shik et de Petrossiyan , une expression approximative de la mobilité de Hall a été obtenue. Il a été montré que ce modèle fonctionne parfaitement pour les petites doses d’irradiation. Lorsque la dose dépasse une certaine valeur critique ( D= 2.98 1017 électrons /cm2 le modèle considéré passe au modèle du potentiel à relief aléatoire.

"Velvet":Sous-titrage de l'épisode 1 de la série de R. Campos et G.R. Neira

OpenAIRE

De Corte, Inès

2017-01-01

Sous-titrage du premier épisode de la série "Velvet" réalisée par R. Campos et G.R. Neira et produite par Bambú Producciones. Contextualisation de la série dans l'histoire et dans les jeux d'influences de l'industrie de la mode afin d'évaluer l'adaptation de la série et sa crédibilité historique. Commentaires de traduction expliquant le processus de traduction, la réflexion et la méthodologie employées. Master [120] en traduction, Université catholique de Louvain, 2017

Interactions between impurities and defects created by irradiation in iron; Interactions entre les impuretes et les defauts crees par irradiation dans le fer

Energy Technology Data Exchange (ETDEWEB)

Vigier, P [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1968-07-01

'expose et aux discussions de nouveaux resultats experimentaux. Grace a l'addition d'impurete dans le fer, des experiences de trainage magnetique, energie stockee, resistivite et dilatometrie ont permis d'etablir que le stade I se rattache au modele propose par Granato et Nilan (90): seul le dernier sous-stade I{sub E} provient de la disparition des interstitiels dans les lacunes apres leur libre migration dans le reseau. Divers modeles sont discutes pour le stade II; s'il est probable que les diinterstitiels sont observables apres une irradiation aux electrons, aucune bande de trainage ne semble leur correspondre apres une irradiation aux neutrons. Des phenomenes particuliers apparaissent dans le fer irradie lorsqu'il contient des impuretes telles que nickel ou silicium (apparition de nouvelles bandes de trainage, leur transformation les unes dans les autres); ils refletent la complication successive du defaut elementaire interstitiel de fer-atome d'impurete. Enfin, dans une derniere section, l'auteur decrit quelques experiences effectuees sur des alliages fer-carbone irradies ou non ; elles montrent que le carbone apres avoir precipite a une temperature inferieure a 300 deg. C, se remet en solution lorsque l'alliage est chauffe au-dela de 330 deg. C. (auteur)

Study of the effect of neutron and electron irradiations on the low temperature thermal conductivity of germanium and silicon; Etude de l'effet des irradiations neutronique et electronique sur la conductibilite thermique aux basses temperatures du germanium et du silicium

Energy Technology Data Exchange (ETDEWEB)

Vandevyver, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-06-15

The main results obtained from this work are the following: 1 Neutron irradiation (at 300 deg. K) produces lattice defects in germanium and silicon, and a corresponding very large lowering of the thermal conductivity is observed in the low temperature region (4-300 ). The results obtained have been explained with the help of the following hypotheses: for silicon a scattering of phonons by the stress fields produced by the defects; for germanium, a supplementary scattering of the electron phonon type. 2 Annealing treatments carried out on these materials above 373 deg. K restored the thermal conductivity over the whole temperature range of the measurements (4-300 deg. K); in the case of both germanium and silicon there were two steps in the annealing process. 3 A study of the thermal conductivity of germanium (initially P or N) after an electronic irradiation showed that the scattering of phonons could depend on the state of charge of the defects thus produced. (author) [French] Les principaux resultats obtenus au cours de ce travail sont les suivants : 1 Les irradiations neutroniques (a 300 deg. K) introduisent des defauts de reseau dans le germanium et le silicium et l'on observe correlativement pour ces materiaux, une tres importante diminution de conductibilite thermique dans le domaine des basses temperatures (4-300 deg. K). Les resultats obtenus ont pu etre interpretes en admettant principalement: pour le silicium, une diffusion des phonons par les champs de contrainte dus aux defauts; pour le germanium, une diffusion additionnelle du type electron-phonon. 2 Des recuits effectues sur ces materiaux au-dessus de 373 deg. K ont montre une restauration de la conductibilite thermique dans tout l'intervalle de temperature de mesure (4-300 deg. K) et comportant pour le germanium et le silicium, deux etapes de recuit 3 L'etude de la conductibilite thermique de germanium (initialement N ou P) apres une irradiation electronique, a montre que la diffusion des phonons

The development of a pilot industrial irradiation facility; Realisation d'une station d'irradiation {gamma} a caractere 'semi-industriel'

Energy Technology Data Exchange (ETDEWEB)

Balestic, F; Leveque, P; Prevost, C; Comte, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

Saclay, utilisee pour le stockage des barres d'uranium apres leur defournement, a ete specialement amenagee pour permettre des irradiations sur des quantites semi-industrielles de produits chimiques et alimentaires. Des calculs de flux {gamma} ont montre qu'il etait possible de realiser des sources intenses et d'irradier de grands volumes avec des arrangements particuliers de barres dans la casemate. L'installation comporte ainsi deux parties ou different la repartition des barres et les dispositifs d'irradiation. Dans une premiere chambre betonnee et climatisee, 9 rangees verticales de barres d'uranium et de canaux a irradiation alternent avec un ecartement minimum de fa n a constituer un assemblage compact. Le diametre des canaux varie de 10 a 20 cm et la hauteur de chargement utile, 70 cm, correspond a la zone sensiblement uniforme du rayonnement. Dans une deuxieme chambre maintenue a -7 deg. C, des balancelles (h: 70 cm, Q: 35 cm) guidees par un monorail circulent autour d'une seule rangee de 20 barres. La carte des flux y a l'interieur de la casemate a ete etablie par une methode de calcul deja utilisee pour les barres de la pile EL2 a Saclay. Le champ du rayonnement varie dans le temps principalement au cours des premiers mois apres le defournement et suivant le motif geo etrique adopte pour les barres. Les intensites d onisation theoriques sont comprises entre dix mille et plusieurs millions de roentgens par heure. Ces valeurs sont comparees aux resultats obtenus avec les dosimetres chimiques au sulfate ferreux et a l'acide oxalique. En outre, des verreseurs etalonnes avec des sources de cobalt permettent un controle rapide de la dose delivree aux balancelles du convoyeur durant leur parcours dans la chambre froide. La casemate de desactivation de EL3 constitue de par sa capacite de traitement la premiere realisation en France d'une station d'irradiation {gamma} a caractere semi-industriel effectuee avec le concours des services du Commissariat a l

Irradiation and development of the nuclear emulsions exposed to intense fluxes of thermal neutrons with {gamma} rays; Irradiation et developpement des emulsions nucleaires exposees a des flux intenses de neutrons thermiques, accompagnes de rayons {gamma}

Energy Technology Data Exchange (ETDEWEB)

Faraggi, H; Bonnet, A; Cohen, J [Commissariat a l' Energie Atomique, Lab. du Fort de Chatillon, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1952-07-01

The thermal neutron fluxes provided by nuclear reactors permit the survey of relatively rare phenomenons, and dosage of very weak quantities of some elements. One of the most favorable detection technique are constituted by the use of the nuclear emulsions. one can mention: - the dosage of uranium by counting in the emulsion the number of traces due to fission fragments after irradiation. - The dosage of the lithium and the boron as trace amounts with the help of nuclear reactions (n, {alpha}) and thermal neutrons. - The research of reactions (n, {alpha}) or (n, p) of very weak cross section for middle or heavy elements. These different applications require however important neutrons fluxes. It had therefore obliged us to search for the most favorable irradiation and development of the emulsions conditions, to get the best visibility of the trajectories and decrease the phenomena of fog on the emulsion, which prevents any observation. (M.B.) [French] Les flux de neutrons thermiques fournis par les reacteurs nucleaires permettent l'etude de phenomenes relativement rares, et le dosage de tres faibles quantites de certains elements. Un des moyens de detection les plus favorables est constitue par l'utilisation des emulsions nucleaires. on peut citer: - le dosage de l'uranium par comptage dans l'emulsion du nombre de traces dues aux fragments de fission apres irradiation. - Le dosage du lithium et du bore a l'etat de traces a l'aide des reactions (n, {alpha}) sous l'action des neutrons thermiques. - La recherche de reactions (n,{alpha}) ou (n,p) de tres faible section efficace pour des elements moyens ou lourds. Ces differentes applications necessite cependant des flux de neutrons important. On a donc ete amene a rechercher les conditions les plus favorables d'irradiation et de developpement des emulsions, de maniere a obtenir la meilleure visibilite des trajectoires et diminuer les phenomenes de voile de l'emulsion, qui empeche toute observation. (M.B.)

Irradiation and development of the nuclear emulsions exposed to intense fluxes of thermal neutrons with {gamma} rays; Irradiation et developpement des emulsions nucleaires exposees a des flux intenses de neutrons thermiques, accompagnes de rayons {gamma}

Energy Technology Data Exchange (ETDEWEB)

Faraggi, H.; Bonnet, A.; Cohen, J. [Commissariat a l' Energie Atomique, Lab. du Fort de Chatillon, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1952-07-01

The thermal neutron fluxes provided by nuclear reactors permit the survey of relatively rare phenomenons, and dosage of very weak quantities of some elements. One of the most favorable detection technique are constituted by the use of the nuclear emulsions. one can mention: - the dosage of uranium by counting in the emulsion the number of traces due to fission fragments after irradiation. - The dosage of the lithium and the boron as trace amounts with the help of nuclear reactions (n, {alpha}) and thermal neutrons. - The research of reactions (n, {alpha}) or (n, p) of very weak cross section for middle or heavy elements. These different applications require however important neutrons fluxes. It had therefore obliged us to search for the most favorable irradiation and development of the emulsions conditions, to get the best visibility of the trajectories and decrease the phenomena of fog on the emulsion, which prevents any observation. (M.B.) [French] Les flux de neutrons thermiques fournis par les reacteurs nucleaires permettent l'etude de phenomenes relativement rares, et le dosage de tres faibles quantites de certains elements. Un des moyens de detection les plus favorables est constitue par l'utilisation des emulsions nucleaires. on peut citer: - le dosage de l'uranium par comptage dans l'emulsion du nombre de traces dues aux fragments de fission apres irradiation. - Le dosage du lithium et du bore a l'etat de traces a l'aide des reactions (n, {alpha}) sous l'action des neutrons thermiques. - La recherche de reactions (n,{alpha}) ou (n,p) de tres faible section efficace pour des elements moyens ou lourds. Ces differentes applications necessite cependant des flux de neutrons important. On a donc ete amene a rechercher les conditions les plus favorables d'irradiation et de developpement des emulsions, de maniere a obtenir la meilleure visibilite des trajectoires et diminuer les phenomenes de voile de l'emulsion, qui

Atom probe study of the microstructural evolution induced by irradiation in Fe-Cu ferritic alloys and pressure vessel steels; Etude a la sonde atomique de l`evolution microstructurale sous irradiation d`alliages ferritiques Fe-Cu et d`aciers de cuve REP

Energy Technology Data Exchange (ETDEWEB)

Pareige, P

1996-04-01

Pressure vessel steels used in pressurized water reactors are low alloyed ferritic steels. They may be prone to hardening and embrittlement under neutron irradiation. The changes in mechanical properties are generally supposed to result from the formation of point defects, dislocation loops, voids and/or copper rich clusters. However, the real nature of the irradiation induced-damage in these steels has not been clearly identified yet. In order to improve our vision of this damage, we have characterized the microstructure of several steels and model alloys irradiated with electrons and neutrons. The study was performed with conventional and tomographic atom probes. The well known importance of the effects of copper upon pressure vessel steel embrittlement has led us to study Fe-Cu binary alloys. We have considered chemical aging as well as aging under electron and neutron irradiations. The resulting effects depend on whether electron or neutron irradiations ar used for thus. We carried out both kinds of irradiation concurrently so as to compare their effects. We have more particularly considered alloys with a low copper supersaturation representative of that met with the French vessel alloys (0.1% Cu). Then, we have examined steels used on French nuclear reactor pressure vessels. To characterize the microstructure of CHOOZ A steel and its evolution when exposed to neutrons, we have studied samples from the reactor surveillance program. The results achieved, especially the characterization of neutron-induced defects have been compared with those for another steel from the surveillance program of Dampierre 2. All the experiment results obtained on model and industrial steels have allowed us to consider an explanation of the way how the defects appear and grow, and to propose reasons for their influence upon steel embrittlement. (author). 3 appends.

Determination of plateau slope and activity using filter measurement results and W. Chauvenet's criterion (Mage II and Fortran IV calculation programmes); Determination de pente de palier et d'activite a partir de resultats de mesure filtres selon le critere de W. Chauvenet (programmes de calcul en Mage II et Fortran IV)

Energy Technology Data Exchange (ETDEWEB)

Becker, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires, Departement d' Electronique Generale, Laboratoire de Metrologie de la Radioactivite

1967-10-01

In order to permit (at least partially) the objective comparison of plateau characteristics of gas-ionisation counters, plateaus which are obtained when each radioactive sample from normal LMR production is measured, a programme has been drawn up (on an electronic computer) comprising a processing section using least squares for obtaining the corrected plateaux and energies. With a view to an automatic operation of radio-measurement chains, the programme also comprises a preliminary section in which the statistical considerations of B. Peirce have been applied in the version better known as Chauvenet's criterion; this has been done with a view to eliminate measurement results which are dubious and even totally wrong. (author) [French] Pour rendre possibles (au moins partiellement) des comparaisons objectives entre paliers de caracteristiques de compteurs a ionisation gazeuse, paliers traces lors de la mesure de chaque etalon radioactif de la production courante du L.M.R., il a ete ecrit un programme (sur machine a calculer electronique) comportant une partie de traitement par les moindres carres en vue de la determination de pentes et d'activites corrigees. En prevision d'une exploitation automatique de cha es de radio-mesure, le programme comporte en outre une partie preliminaire dans laquelle des considerations statistiques dues a B. Peirce ont ete appliquees dans leur version plus connue sous le nom de critere de Chauvenet et ce dans le but d'une elimination des resultats de mesure suspects et meme veritablement aberrants. (auteur)

Study of the dynamic behaviour of the reactor Rapsodie; Etude du comportement dynamique de la pile rapsodie

Energy Technology Data Exchange (ETDEWEB)

Abdon, R; Chaigne, M [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

1964-07-01

. The investigation of the control, carried out on analog computer, served to determine the different possible means of starting and changing the conditions of the reactor as well as its automatic control. The calculations were examined in the totality by the construction of a training simulator composed of a board similar to the control board of the reactor, all of whose commands (reactivity and flows) work on an analogue computer which resolves in the real time the dynamic equations of the reactor and which reproduces simultaneously all the parameters representing the state of the installation (power, period, temperatures, etc. ) in the case of various incidents as well as under normal conditions of functioning. (authors) [French] On sait que le developpement des reacteurs surgenerateurs a neutrons rapides pose des problemes nouveaux d'une part dans les domaines mecanique et thermique et d'autre part en ce qui concerne leur comportement dynamique et leur surete. La pile RAPSODIE a ete l'objet de tres nombreuses etudes dynamiques effectuees sur machines analogiques et digitales, pour deux versions du combustible (metal et oxyde). Apres elaboration des modeles mathematiques representatifs de l'ensemble de l'installation (bloc pile et circuit de refroidissement) tant du point de vue neutronique que du point de vue thermodynamique, on a mis au point les schemas analogiques et les codes digitaux utilisables pour mener a bien les simulations d'incidents, de conduite et de stabilite du reacteur. On s'est attache, par rapport aux methodes habituelles a obtenir une precision plus grande, par un decoupage en zones plus fines, par l'emploi de formulations plus representatives du systeme reel, voire solubles analytiquement. Les etudes d'incidents ont ete effectuees par voie analogique pour l'ensemble de l'installation et par voie digitale pour l'etude du bloc pile seul ou de l'installation fonctionnant avec un seul circuit thermique. Un programme complementaire special - qui, a

The development of a cell-assembly for the treatment of irradiated fuels on a semi-industrial scale; Etude concernant la realisation d'un ensemble de cellules destinees a des traitements de combustibles irradies a l'echelle semi-industrielle

Energy Technology Data Exchange (ETDEWEB)

Faugeras, P; Couture, J; Lefort, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1961-07-01

The main studies and experiments involved in the development of a cell-assembly for the treatment of irradiated fuels on a semi-industrial scale are described. It must be possible to modify or transform each of these cells without interrupting the rest of the pilot. A full-scale prototype cell (3 x 4 x 6 m) has been built with an {alpha}-protection independent of the {gamma}-protection. It features all the main characteristics: tightness to {gamma} losses, dense glass lighting, ventilation. This cell has made possible trials on transfer, remote-controls and tele-dismantling, as well as the development of new methods of rapidly connecting hydraulic circuits. In conclusion the final form is given of the cells selected for the pilot. (author) [French] Il est decrit les principales etudes et experiences faites en vue de la realisation d'un ensemble de cellules destinees a des traitements de combustibles irradies a l'echelle semi-industrielle. Chacune de ces cellules doit pouvoir etre modifiee ou transformee sans interrompre le reste du pilote. Une cellule prototype vraie grandeur (3x4x6 m) est construite avec une protection {alpha} independante de la protection {gamma}. Elle comporte tous les elements importants: porte {gamma} etanche, eclairage verre dense, ventilation. Cette cellule a permis des experiences de transferts de telemanipulateurs et de teledemontages, ainsi que la mise au point de nouveaux procedes de jonction rapide pour des circuits hydrauliques. En conclusion, on indique la forme definitive des cellules retenues pour le pilote. (auteur)

Le comportement mécanique des risers. Influence des principaux paramètres Mechanical Behaviour of Marine Risers Mode of Influence of Principal Parameters

Directory of Open Access Journals (Sweden)

Sparks C.

2006-11-01

Full Text Available Cet article a pour but de déterminer les principaux paramètres qui gouvernent le comportement mécanique des risers de forage et de production, et d'expliquer pourquoi et comment ils interviennent. Une compréhension claire de ces influences permet d'optimiser rapidement un riser donné sans avoir recours à un grand nombre d'analyses par ordinateur. Celui qui conçoit un riser est principalement préoccupé par les points suivants : - niveaux de contraintes dans la partie courante du riser ; - mouvements angulaires à la base du riser (ou moments, dans le cas d'une liaison rigide ; - mouvements relatifs au niveau de la liaison plate-forme/riser. La méthode utilisée dans cet article consiste à établir des expressions analytiques valables pour des risers simplifiés. Les conclusions tirées de ces expressions ont ensuite été verifiéés à l'aide d'un programme de calcul capable de simuler le comportement dynamique d'un riser dans des configurations variées. This paper attempts to identify the principal parameters, that influence the behavior of drilling and production risers and to explain how and why they do so. Clear understanding of these influences enable particular risers to be optimised rapidly without recourse to an inordinate number of computer analyses. The points of greatest concern, to the riser designer, are: a Stress levels in the main length of riser. (b Angular movement at sea bed (or moment, if the connection is rigid. (c Relative movement at riser/platform connection. The approach, used in the paper, has been ta derive analytical expressions, for simplified riser cases. Conclusions drawn from these expressions have then been checked for validity, by using a dynamic analysis computer program to simulate a wide range of cases.

The Behaviour of Various Graphites under Neutron Irradiation; Comportement de divers graphites sous l'effet de l'irradiation neutronique; ПОВЕДЕНИЕ РАЗЛИЧНЫХ ГРАФИТОВ ПОД ДЕЙСТВИЕМ НЕЙТРОННОГО ОБЛУЧЕНИЯ; Efectos de la irradiación neutrónica sobre diversos tipos de grafitos

Energy Technology Data Exchange (ETDEWEB)

Fitzer, E.; Vohler, O. [Siemens-Planiawerke AG für Kohlefabrikate, Meitingen bei Augsburg, Federal Republic of Germany (Germany)

1963-08-15

paper is concerned with the correlation between the Wigner growth and the shape of the sample. The results presented here are compared with those reported in the literature, and it is shown that the absolute value of the Wigner growth depends on the shape of the irradiated graphite sample in such a manner that the specimens with the greatest length- to- width ratio show the greatest relative change in length after irradiation. In the last section the results of irradiations of the same graphite types in three different reactors, FRM, EL. a and GETR, are compared. The reactors differ very much in the neutron spectrum of their irradiation channels, and on the basis of the measured radiation damages the neutron doses can be estimated. It was found that in a test hole in the FRM the same irradiation damage is caused by a dose of 1 x 10{sup 19} n/cm{sup 2} as in the core of the GETR at 1 x 10{sup 21}n/cm{sup 2}. In the EL.3, the equivalent degree of damage could not be achieved because of the low neutron energy at the irradiation channel. (author) [French] Depuis un certain nombre d'années, la modification des propriétés du graphite sous l'effet de l'irradiation neutronique - question très importante dans les études de réacteurs - fait l'objet de recherches approfondies, dont les résultats ont été expósés en détail par plusieurs auteurs. Ces expériences sur l'irradiation visaient à déterminer quantitativement les modifications des propriétés en fonction du nombre de neutrons par cm{sup 2} et de Ja température. Le programme de recherche sur l'irradiation, entrepris à l'initiative du Ministère des affaires atomiques de la République fédérale d'Allemagne, avait pour objet d'étudier le comportement de toute une gamme de graphites pour réacteurs sous irradiation contrôlée. Dans la première partie du mémoire, les auteurs indiquent quels ont été les dommages causés par les rayonnements, selon le type de graphite artificiel. Les types de graphite ne

Réutilisation d'argiles très plastiques (A4) en remblai : Suivi du comportement après trois ans de réalisation

OpenAIRE

BERCHE, Véronique; ROBERT, Nicolas; BOUSSAFIR, Yasmina; FERBER, Valéry

2013-01-01

Cet article présente la réalisation de remblais en argile très plastiques en 2003 sur l'A34 dans les Ardennes (France) ainsi que les résultats du suivi du comportement de ces remblais dans le temps. Après un bref rappel des conditions de réalisation de ces remblais, un résumé des résultats de portance et de densité à court et moyen terme sera exposé. Dans un deuxième temps, des résultats de densité (double sonde Gamma et passage au banc Gamma) et essais Dynaplaque réalisés en 2006 seront c...

High fetal irradiation: about one pregnant woman receiving infra diaphragmatic radiotherapy for Hodgkin lymphoma; Irradiation foetale elevee: a propos d'une femme dont la grossesse etait meconnue irradiee en sous-diaphragmatique pour un lymphome hodgkinien

Energy Technology Data Exchange (ETDEWEB)

Moreau, M.V.; Brunaud, C.; Marchesi, V.; Hoffstetter, S.; Peiffert, D. [Centre Alexis-Vautrin, Service de Radiotherapie, 54 - Vandoeuvre-les-Nancy (France); Bologna, S. [Centre Hospitalier Universitaire Nancy-Brabois, Service d' Hematologie, 54 - Vandoeuvre-les-Nancy (France)

2007-12-15

We report the case of a 19-year-old young woman for whom was discovered a pregnancy at the end of the irradiation for a Hodgkin lymphoma (stage IV bone Bb), initially treated by chemotherapy. The radiotherapy delivered 36 Gy in infra-diaphragmatic volumes (lumbo-aortic, spleen, L5), beginning in a pregnant patient for less than 4 amenorrhea weeks. The calculated received fetal dose (literature data, measurement with software T.P.S., measurement on phantom) is high: it's between 2.8 and 5 Gy. With a current follow-up of 4 years since the radiotherapy's end, the patient is in complete remission and her child presents with a normal development for the age, in spite of the infra diaphragmatic irradiation. (authors)

Behaviour of heavy water in nuclear reactors of the CEA; Comportement de l'eau lourde dans les piles du C.E.A

Energy Technology Data Exchange (ETDEWEB)

Chenouard, J; Dirian, G; Roth, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1955-07-01

In the two heavy water reactors of the CEA: Zoe and P-2, we do: A) the supervision of the isotopic composition of the heavy water; B) the supervision of gases released by the decomposition of the heavy water under radiation, and to their recombination; C) periodic analyses of impurities. (M.B.) [French] Dans les deux piles a eau lourde du Commissariat a l'Energie Atomique: Zoe et P 2, nous effectuons: A) la surveillance de la composition isotopique de l'eau lourde; B) la surveillance des gaz degages par la decomposition de l'eau lourde sous radiation, et a leur recombinaison; C) des analyses periodiques d'impuretes. (M.B.)

The reprocessing of irradiated fuels by halides and their compounds; Le traitement des combustibles irradies par les halogenes et leurs composes

Energy Technology Data Exchange (ETDEWEB)

Bourgeois, M; Faugeras, P [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1964-07-01

A brief description is given of the experiments leading to the choice of the process volatilization of fluorides by gas phase attack. The chemical process is described for certain current types of clad Fuels: the aluminium or the zirconium cladding is first volatilized as chloride by attack with gaseous hydrogen chloride. The uranium is then transformed into volatile hexafluoride by attack with fluorine. These reactions are carried out consecutively in the same reactor in the presence of a fluidized bed of alumina which facilitates heat exchange. The experiments have been carried out in quantities from 100 gms to several kilograms of fuel, first without activity, and then with tracers. A description is given of the laboratory research which was carried out simultaneously on the separation of uranium and plutonium fluorides. Finally, an apparatus is described which is intended to test the process on irradiated fuel at an activity level of several thousands of curies of fission products. (authors) [French] On rappelle brievement les experimentations qui nous ont permis de decider du procede adopte volatilisation des fluorures par attaque en phase gazeuse. On decrit le processus chimique pour certains types courants de combustibles Gaines: dans un premier stade, l'aluminium ou le zirconium est volatilise sous forme de chlorure par action de l'acide chlorhydrique. Ensuite, l'uranium est transforme en hexafluorure volatil par action du fluor. Ces operations se font successivement dans un meme reacteur, en presence d'un lit fluidise d'alumine qui a pour but de faciliter les echanges thermiques. L'experimentation a ete conduite sur des quantites allant de 100 g a plusieurs kg de combustibles, en inactif, puis avec des traceurs. On decrit les etudes de laboratoire menees parallelement sur la separation des fluorures d'uranium et de plutonium. Enfin, on decrit une installation en construction destinee a experimenter le procede sur combustible irradie, a l'echelle de

PH measurement under pressure and at high temperatures; Mesure du pH sous pression et a temperature elevee

Energy Technology Data Exchange (ETDEWEB)

Fournie, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Le Peintre, M; Mahieu, C [Centre National de la Recherche Scientifique (CNRS), 91 - Gif-sur-Yvette (France)

1961-07-01

In the first part the development and operation of a glass electrode under pressure at room temperature is described. The pressure equilibrium between the inside and outside of the glass membrane several centimetres thick is obtained instantaneously by means of a siphon. The use of a silicone oil as electrical insulator makes possible the working of the glass electrode with the siphon at high pressures (100 kg/cm{sup 2}). In the second part, we determined the pH of various buffer solutions up to 250 deg. C using a cell of our design having two hydrogen electrodes. The values thus obtained for the buffer solutions make it possible to verify and calibrate the pH electrodes independently of the oxido-reduction potential of the medium. In the third part we give the results obtained up to 200 deg. C with the glass electrodes developed in conjunction with the Societe St Gobain. (author) [French] Dans une premiere partie, nous exposons la mise au point et le fonctionnement d'une electrode en verre sous pression a la temperature ordinaire. L'equilibrage instantane de la pression a l'interieur et a l'exterieur de la membrane en verre de quelques diziemes de millimetres d'epaisseur s'effectue par l'intermediaire d'un siphon. L'emploi d'une huile de silicone comme isolant electrique a permis le fonctionnement de l'electrode en verre a siphon sous haute pression (1000 kg/cm{sup 2}). Dans une deuxieme partie, nous avons determine jusqu'a 250 deg. C les valeurs du pH des diverses solutions tampons avec une cellule de notre conception a deux electrodes d'hydrogene. Les valeurs des solutions tampons ainsi obtenues permettent de verifier et d'etalonner les electrodes a pH independantes du potentiel d'oxydo-reduction du milieu. Dans une troisieme partie, nous relatons les resultats obtenus jusqu'a 200 deg. C avec les electrodes en verre mis au point en collaboration avec la Societe Saint-Gobain. (auteur)

Sigand : une application SIG sous androïd (tablette de la gestion des chantiers

Directory of Open Access Journals (Sweden)

CHAKIB SAFAR BATI

2016-12-01

Full Text Available L’introduction de données terrain pour les études environnementales ou de gestion de l’espace, régionales ou locales est une nécessité incontournable pour la validation des traitements et des interprétations mais aussi pour fournir des compléments d’informations aux divers travaux. Mais ce retour terrain est également de plus en plus demandé pour les gestionnaires de chantiers et de projets qui ont une exigence de contrôle ou de suivi et donc d’une information temps réel sur l’avancement des travaux, autrement pour introduire de nouvelles informations sur la base de données géoréférencées. Les avancées technologiques en matière de manipulation de l’information géographique (GPS, tablette graphique, téléphone portable, réalité augmentée permettent d’espérer la mise à dispositiondes professionnels, voire d’un plus large public, des outils adéquats pour de tels travaux. Actuellement, les outils d’élaboration, de gestion et d’exploitation des bases de données géographiques (solutions SIG ne sont pas encore complètement opérationnels en version « tablette » ; des applications telles que Qgis ou ArcGis sous Androïd attendent encore des développements. Nous présentons ici la première version d’une application SIG sous Androïd (disponible sur tablette pour la gestion en temps réel des chantiers qui permet de charger des couches vectorielles et de les mettre à jour sur le terrain en fonction de l’observation directe ; les couches (préalablement géoréférencées sont projetées sur des fonds cartographiques fournis par un serveur cartographique Google Maps (Route, Satellite, terrain; dans le cas d’absence de connexion internet, le fond cartographique est ramené d’un cache. Nous utilisons SpatialiteAndroïd pour le stockage et la manipulation des données géographiques. Le contrôleur de cartes Google Maps est employé pour afficher en mode cartographique les données stockées dans

Organisation of biological research carried out in the United States by the A.E.C. or under her contract (1960); Organisation des recherches biologiques menees aux Etats-Unis par l'A.E.C. ou sous son egide. Compte-rendu sommaire d'une mission d'etude (1960)

Energy Technology Data Exchange (ETDEWEB)

Pellerin, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

This report is based on information gathered in the course of a trip to the United States, in November and December 1958 which consisted chiefly of visits to the main biological and medical research laboratories and discussions with the heads of these establishments. A description is given of the general organisation of the Atomic Energy Commission's Division of Biology and Medicine, and of the distribution of responsibility for radiation protection work and for biological, medical and agricultural research amongst the various Services attached to it; this is followed by a more detailed account of the activities carried on in this field at the great national laboratories. Finally, the systems of collaboration set up with external research organisations in the form of research contracts are examined, together with the substantial help provided by the A.E.C. for biological, medical and agricultural research in general, owing to a systematic policy of subsidising the distribution of radioisotopes for this purpose. (author) [French] Le present rapport a ete etabli sur la base des renseignements recueillis au cours d'un voyage d'etude aux Etats-Unis, en novembre et decembre 1958, comportant notamment la visite des principaux laboratoires de recherche biologique et medicale et des entretiens avec les principaux responsables de ces laboratoires. Apres une description de l'organisation generale de la 'Division of Biology and Medicine' de l'Atomic Energy Commission et de la repartition entre les divers Services qui lui sont rattaches des responsabilites concernant la protection contre les radiations et la Recherche biologique, medicale et agronomique, des indications plus detaillees sont donnees au sujet des activites poursuivies dans ce domaine au sein des grands laboratoires nationaux. Sont examinees enfin, l'importance et les modalites de la collaboration instituee avec les Organismes de Recherche exterieurs sous la forme de contrats de recherche ainsi que l

Contribution to the study of the desorption of fission gases formed in irradiated uranium oxide; Contribution a l'etude de la desorption des gaz de fission formes dans l'oxyde d'uranium irradie

Energy Technology Data Exchange (ETDEWEB)

Berry, J -L; Darras, R; Roger, B [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

1966-09-01

The release of {sup 133}Xe from irradiated UO{sub 2} has been studied in the temperature range 1300 to 1900 deg C, using various monocrystalline or sintered samples. Up to 1600 deg C, this release is proportional to the square root of the time and thus occurs essentially by diffusion. The apparent diffusion constant D' decreases and the activation energy of the corresponding process increases as the integrated neutron flux received by the fuel increases. As the density of the sintered samples decreases however, the activation energy of the release also decreases, so that the difference between D' values for sintered samples of different densities decreases as the temperature rises. Finally, above 1600 deg C, the fission gas release phenomenon is governed by UO{sub 2} evaporation, and all the different types of oxide studied have similar behaviors, characterized by poor retention of these gases. (authors) [French] La desorption du xenon 133 forme dans le bioxyde d'uranium irradie a ete etudiee dans l'intervalle de 1300 a 1900 C, a l'aide de differents echantillons monocristallins ou frittes. Jusqu'a 1600 C, elle s'effectue proportionnellement a la racine carree du temps, donc essentiellement par diffusion. La pseudo-constante de desorption D' decroit et l'energie d'activation du processus correspondant croit lorsque le flux de neutrons integre recu par le combustible augmente. Cependant, lorsque la densite des frittes diminue, l'energie d'activation de desorption diminue egalement, de sorte que l'ecart entre les valeurs de D' relatives a des frittes de densites differentes se restreint lorsque, la temperature s'eleve. Finalement, au-dessus de 1600 C, l'evaporation de l'UO{sub 2} regit le phenomene de liberation des gaz de fission, et toutes les qualites d'oxyde etudiees presentent alors des comportements voisins a cet egard, caracterises par une mediocre retention de ces gaz. (auteurs)

Petanque club

CERN Multimedia

Petanque club

2016-01-01

C'est sous un temps magnifique que se déroulait notre concours de pétanque Challenge Claude Carteret le jeudi 23 juin 2016. Dix doublettes se rencontraient en trois parties à la mêlée. Claude Jouve qui comme à l'habitude tenait la table de marque proclamait vainqueur Christine Aler (épouse de G. Debellis) Avec 3 parties gagnées. 2ème: Gino DEBELLIS coiffé au poteau par le goal avérage par sa femme. 3ème: Sylvie JOUVE plus habitué à l'intendance et qui termine mieux que son époux. Cathia Baigue termine première féminine après les résultats du podium. Notre club pétanque CERN est bien représenté par les féminines qui comporte environ 35 adhérents. Un grand merci à Jennifer, Sylvie et Claude pour leur implication. R...

REPRESENTATIONS NON LINEAIRES DE L'AUTOMATIQUE AVANCEE. APPLICATION AU MOTEUR DIESEL TURBOCOMPRESSE

Directory of Open Access Journals (Sweden)

A LIAZID

2000-12-01

Full Text Available Cet article décrit et commente les principaux modèles non linéaires de représentation, définis en temps discret. Il s'agit des séries fonctionnelles de Volterra, des modèles décrits dans l'espace vectoriel d'état, des systèmes à non linéarités séparées et des modèles sous forme d'équations aux différences. Ceci offrira aux utilisateurs un aperçu pratique sur les choix à réaliser par rapport aux objectifs liés à l'exploitation de ces modèles: simulation ou commande. Quelques exemples portant sur l'identification non linéaire du comportement dynamique du moteur Diesel suralimenté par turbocompresseur, illustrent l'intérêt des modèles NARMAX (Non linear Auto Regressive Moving Average with eXogenous inputs, notamment par leur puissance prédictive.

Elaboration of an Elasto-Plastic Model for High Porosity Chalks. Application to the Compaction of Petroleum Reservoirs Elaboration d'un modèle de comportement élasto-plastique pour les craies très poreuses. Application à la compaction des réservoirs pétroliers

Directory of Open Access Journals (Sweden)

Shahrour I.

2006-11-01

Full Text Available This paper presents a study of the compaction of petroleum reservoirs applied to very porous carbonate rocks such as chalk. In production estimates made in reservoir engineering, the processing of the mechanical problem is often greatly simplified. Good modelling of how materials behave gives special consideration to the influence of mechanical deformations on fluid recovery. After an analysis of the mechanical behaviour of very porous chalks, an elastoplastic behaviour model is derived so as to reproduce the principal experimental observations. This behaviour model can then be used to perform local simulations of the mechanical behaviour of a reservoir under- going depletion and thus to demonstrate the importance of the stress path and the initial stress state on the deformation of materials and hence on the recovery rate. Dans les applications pétrolières, les études de la compaction des roches réservoirs interviennent dans l'estimation des quantités de fluide récupérables et de la subsidence induite par la déplétion du champ de production. Dans la première partie du travail, nous montrons qu'à partir de l'équation linéarisée de la conservation de la masse de fluide, il est possible d'exprimer un taux de récupération distinguant les contributions respectives du fluide et de la roche. En ingénierie de réservoirs, l'hypothèse d'un chemin de contrainte prépondérant dans le milieu de production permet d'exprimer la contribution de la déformation de la roche au moyen de la compressibilité volumique des pores selon ce chemin. Le taux de récupération obtenu est alors dépendant du chemin de contrainte. Lorsque le chemin de contrainte dans le réservoir n'est pas homogène, il est alors nécessaire de connaître la loi de comportement mécanique du matériau étudié. Dans le cas des carbonates très poreux, nous désirons montrer l'influence liée au choix du chemin de contrainte sur les estimations obtenues par une m

Brigitte SIMONOT et Gabriel GALLEZOT (2009) (dir.), L’entonnoir : Google sous la loupe des sciences de l’information et de la communication

OpenAIRE

Bonaccorsi, Julia

2013-01-01

Ce titre annonce d’emblée une posture critique et, plus largement, une promesse de dévoilement. L’approche communicationnelle, affirmée dès le sous-titre, saisit Google comme un objet de recherche à construire à distance des discours promotionnels ou pamphlétaires. La recherche collective prend appui sur une perspective sociotechnique, mais également sociopolitique du moteur de recherche et de ses usages, pour interroger la production de valeurs par la société Google. Le moteur est scruté au ...

Effect of different temperature-time combinations on lipid and protein oxidation of sous-vide cooked lamb loins.

Science.gov (United States)

Roldan, Mar; Antequera, Teresa; Armenteros, Monica; Ruiz, Jorge

2014-04-15

Forty-five lamb loins were subjected to sous-vide cooking at different combinations of temperature (60, 70 and 80 °C) and time (6, 12 and 24 h) to assess the effect on the oxidative stability of lipids and proteins. Heating induced both lipid and protein oxidation in lamb loins. Higher cooking temperature-time combinations increased conjugated dienes and decreased thiobarbituric reactive substances (TBARS) values and hexanal. Total protein carbonyls increased throughout time at all cooking temperatures considered, while α-aminoadipic (AAS) and γ-glutamic semialdehydes (GGS) increased when cooking at 60 °C but not at 80 °C. Links between the decrease in secondary compounds from lipid oxidation due to cooking at higher temperatures and for longer times with the increased levels of 3-methylbutanal and greater differences between total protein carbonyls and AAS plus GGS were hypothesised. Copyright © 2013 Elsevier Ltd. All rights reserved.

La cohérence des comportements professionnels et privés chez les viticulteurs biologiques alsaciens The Coherence of Professional and Private Behaviours among Alsatian Organic Winegrowers

Directory of Open Access Journals (Sweden)

Jean Nizet

2011-02-01

Full Text Available Cette contribution s’interroge sur la forte cohérence observée au niveau des comportements professionnels et privés d’un petit échantillon de viticulteurs alsaciens que nous avons interviewés longuement. On s’attache d’abord à décrire ces comportements et à identifier les principes à partir desquels les acteurs les justifient. On propose ensuite deux hypothèses susceptibles de rendre compte de la cohérence constatée. La première suggère que cette cohé­rence est en partie construite par le discours des interviewés. La seconde s’interroge sur les mécanismes de socialisation. Trois mécanismes sont iden­tifiés : les tensions identitaires que les personnes ressentent lorsqu’elles s’écar­tent des principes évoqués ; les contrôles, formels et surtout informels, qu’elles exercent les unes sur les autres ; la hiérarchie qui s’instaure dans le champ de la viticulture biologique, en raison précisément de la plus ou moins forte cohé­rence des comportements. On montre que ces mécanismes combinent leurs effets pour produire une socialisation puissante et uniforme, qui fait des viti­culteurs biologiques interviewés des individus beaucoup plus intégrés que ce que prédisent des théories sociologiques qui mettent en avant la diversité, ou encore l’éclatement de l’expérience de l’individu contemporain.This contribution looks at the strong level of coherence observed in the behaviours, both professional and private, of a small sample of Alsatian winegrowers whom we interviewed at length. First there is an attempt at describing these behaviours and identifying the principles by which the actors justify them. We then propose two hypotheses liable to account for the coherence observed. The first suggests that this coherence is in part constructed out of the speech of the interviewees. The second asks about the socialization mechanisms. Three mechanisms are identified : the identitary tensions these

Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

Science.gov (United States)

Veres, Teodor

Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques

Identité hors territoire. Les élites espagnoles exilées en France sous la dictature de Primo de Rivera (1923-1930

Directory of Open Access Journals (Sweden)

Elvire Diaz

2006-09-01

Full Text Available Le territoire étant un point d’ancrage de l’identité individuelle et nationale, nous verrons dans ce travail si hors territoire, il peut y avoir préservation de l’identité, individuelle, collective, nationale, débouchant sur une dé-territorialisation, au sens défini par Gilles Deleuze. Notre objet d’étude portera sur le cas d’une micro-société hors territoire, les élites intellectuelles espagnoles exilées en France sous la dictature du Général Miguel Primo de Rivera (1923-1930.Le général Mig...

Study of the electrical behavior of various magnetohydrodynamic generators using explosives; Etude du comportement electrique de differents generateurs magnetohydrodynamiques a explosif

Energy Technology Data Exchange (ETDEWEB)

Bernard, J; Jouys, J [Commissariat a l' Energie Atomique, Limeil-Brevannes (France). Centre d' Etudes

1969-07-01

This report studies the electric behaviour of several types of pulse generators which use the M. H.D. conversion of explosives chemical energy to supply experiments of plasma physics. We study and compare their electric parameters and behaviour on ohmic and inductive loads. The electrical energy which appears on the load is studied in respect of the load and generator characteristics. We point out the way to amplify the initial electric energy. (author) [French] On definit dans ce rapport les principaux types de generateurs electriques utilisant la conversion magnetohydrodynamique de l'energie chimique de l'explosif et leurs differents modes de fonctionnement. On etudie et on compare leurs comportements electriques lorsqu'ils debitent sur un circuit selfique et resistif. On analyse l'influence des parametres electriques sur l'energie recuperee par la charge d'utilisation et on precise les conditions permettant d'obtenir une amplification de l'energie electrique initiale du systeme. (auteur)

Detection of irradiated spice in blend of irradiated and un-irradiated spices using thermoluminescence method

International Nuclear Information System (INIS)

Goto, Michiko; Yamazaki, Masao; Sekiguchi, Masayuki; Todoriki, Setsuko; Miyahara, Makoto

2007-01-01

Five blended spice sample were prepared by mixing irradiated and un-irradiated black pepper and paprika at different ratios. Blended black pepper containing 2%(w/w) of 5.4 kGy-irradiated black pepper showed no maximum at glow1. Irradiated black pepper samples, mixed to 5 or 10%(w/w), were identified as 'irradiated' or 'partially irradiated' or 'un-irradiated'. All samples with un-irradiated pepper up to 20%(w/w) were identified as irradiated'. In the case 5.0 kGy-irradiated paprika were mixed with un-irradiated paprika up to 5%(w/w), all samples were identified as irradiated'. The glow1 curves of samples, including irradiated paprika at 0.2%(w/w) or higher, exhibited a maximum between 150 and 250degC. The results suggest the existence of different critical mixing ratio for the detection of irradiation among each spices. Temperature range for integration of the TL glow intensity were compared between 70-400degC and approximate 150-250degC, and revealed that the latter temperature range was determined based on the measurement of TLD100. Although TL glow ratio in 150-250degC was lower than that of 70-400degC range, identification of irradiation was not affected. Treatment of un-irradiated black pepper and paprika with ultraviolet rays had no effect on the detection of irradiation. (author)

La sous-traitance au Brésil : un phénomène à la fois ancien et nouveau Subcontracting in Brazil: a phenomenon both new and old La subcontratación en Brasil : un fenómeno antiguo y nuevo a la vez

Directory of Open Access Journals (Sweden)

Graça Druck

2009-05-01

Full Text Available L’objectif de l’article est de discuter la sous-traitance aujourd’hui au Brésil. Nous discutons dans l’article le processus de flexibilisation et de précarisation du travail au Brésil, en prenant comme objet d’étude la sous-traitance, en tant qu’une des principales politiques de gestion et d’organisation du travail dans le cadre de la restructuration productive. Nous présentons une synthèse du processus de sous-traitance observé ces dernières années dans le pays, sous ses anciennes et nouvelles modalités, et nous analysons les résultats empiriques récents sur la sous-traitance dans des entreprises industrielles à haut risque pour l’environnement et la santé des travailleurs, dans la Région Métropolitaine de Salvador/Bahia/Brésil, de même que nous indiquons les principales de formes de résistance et de contre-pouvoirs construits contre la précarisation du travail et la sous-traitance.The purpose of the article is to discuss current subcontracting in Brazil. Our study subject « subcontracting as one of the main work management and organization policies in the framework of productive restructurings » used to discuss the work flexilibization and precarization process in Brazil. We present a synthesis of the subcontracting process observed in recent years in this country, under its old and new conditions, and we analyze the recent empirical results on subcontracting in industrial enterprises at high risk to the environment and workers’ health, in the metropolitan region of Salvador/Bahia, Brazil. We also identify the main forms of resistance and the counterbalances developed against work precarization and subcontracting.El objetivo de este artículo es discutir la tercerización en el Brasil contemporáneo. Se discute el proceso de flexibilización y de precarización del trabajo en Brasil, tomando como objeto de estudio la subcontratación como una de las principales políticas de gestión y de organizaci

COMPORTEMENT D’UN COMPOSITE FINE MINERALE - CIMENT - BOIS ELABORE A L’AIDE DE DECHETS INDUSTRIELS SOLIDES

Directory of Open Access Journals (Sweden)

M.L BENMALEK

2000-06-01

Full Text Available Cinq fines minérales de différentes natures minéralogiques et de limites granulaires comparables, provenant de résidus de carrières, ont été traitées pour former le squelette de bétons légers d'isolation. L'allégement et le pouvoir isolant de ces bétons sont obtenus par incorporation de granulats de bois dans la matrice constituée de la fine minérale et de ciment CPA. Dans une première partie, sont présentés les principales caractéristiques de ces fines: minéralogie par diffraction des rayons X, granulométrie laser, conductivité thermique à la sonde TPS, densité sèche par  pycnomètrie à eau et morphologie au MEB. La seconde partie est consacrée à l'étude de l'effet des caractéristiques de ces fines sur le comportement hygrothermique et mécanique de ces bétons élaborés avec une même formulation et un même état de consistance au moulage. Les résultats de ces investigations sont comparés entre eux et  à ceux de matériaux usuels classés par la RILEM.

Gazettes sous influence : le Courrier du Bas-Rhin, la Gazette des Deux-Ponts et les sujets touchant la Russie vers 1770

Directory of Open Access Journals (Sweden)

Georges Dulac

2016-11-01

Full Text Available Vers 1770, la campagne anti-russe du gouvernement français tend à dégrader l’image de la Russie, ce qui lèse gravement ses intérêts, notamment quand elle doit emprunter pour financer la guerre avec la Turquie. Aussi le prince Dmitri Alexeevitch Golitsyn, ministre plénipotentiaire à La Haye, se montre-t-il alors très actif sur ce terrain. Sa correspondance avec Pétersbourg témoigne de ses efforts, aux effets inégaux, pour influer sur les informations diffusées par quelques journaux : principalement le Courrier du Bas-Rhin, publié par Jean Manzon à Trèves, sous contrôle prussien, et dans une moindre mesure les deux Gazettes des Deux-Ponts, l’une politique, l’autre littéraire. Le journaliste de Trèves, qui trouve son intérêt à prendre le parti de la Russie, met en œuvre en sa faveur un discours journalistique abondant et parfois très élaboré. Cependant, la ligne du journal subit des fluctuations sensibles, selon l’évolution de la situation et à la suite de diverses interventions, dont celles du roi de Prusse et d’autre part de Stanislas-Auguste, qui pensionne un temps le journaliste. La Gazette des deux Ponts pratique l’information orientée avec plus de finesse, et, comme la gazette littéraire, accorde une large place à la matière russe : mais sur le plan politique, son traitement reste le plus souvent sous influence française et répond rarement aux vœux de D. A. Golitsyn.

Le pardon ou l’oubli ? La réhabilitation judiciaire en France sous la IIIe République : le cas d’Angers

OpenAIRE

Coltel, Antony

2011-01-01

La réhabilitation judiciaire constitue une forme essentielle du « pardon officiel » que la société française, sous la IIIe République, pouvait accorder aux anciens condamnés. La réhabilitation judiciaire s’applique à des condamnés ayant subi leur peine en bonne et due forme et non à des innocents injustement punis ayant obtenu la révision de leur procès. Il s’agit donc d’une mesure de pardon spécifique inaugurée par les codes napoléoniens, rétablissant le condamné dans ses droits et effaçant ...

Processus d'innovation et recomposition des territoires agricoles : le cas du semis sous couvert végétal au nord du Cameroun

OpenAIRE

Dugué, Patrick; Olina Bassala, Jean-Paul

2015-01-01

Au nord du Cameroun, l'adoption des systèmes de culture sous couvert végétal (SCV) butte sur le partage des résidus de culture fourragers en saison sèche entre le bétail et la couverture du sol. Elle nécessite donc d'accroître l'offre fourragère et de prendre en compte les différents types d'élevage (villageois, semi-sédentaire, transhumant, etc.). Dans les conditions actuelles de pratique des SCV par les producteurs (faible couverture du sol, peu d'années successives en SCV) les effets atten...

Lutte contre le Bremia de la laitue en pépinière et sous abri froid : compte-rendu d'essai 2005

OpenAIRE

Lambion, Jérôme

2006-01-01

Le mildiou de la laitue (Bremia lactucae) est la maladie la plus redoutée sur cette espèce, notamment en culture biologique d’hiver sous abris. En Provence, les dégâts sont très importants, parfois dès la pépinière, et entraînent de fortes pertes financières. Cette situation est due à deux facteurs principaux : d’une part au contournement récurrent des résistances génétiques par de nouvelles souches de Bremia (25 races déterminées à ce jour), et d’autre part à la faiblesse des méthodes de lut...

Applications of electron spin resonance to some problems of radiation chemistry; Applications de la resonance paramagnetique electronique a quelques problemes de chimie sous rayonnements

Energy Technology Data Exchange (ETDEWEB)

Chachaty, C [Commissariat a l' Energie Atomique Saclay (France). Centre d' Etudes Nucleaires

1968-06-01

The electron spin resonance (E.S.R.) spectra of gamma irradiated polar organic glasses, at 77 K, shows a single line centered at g {approx} 2, attributed to solvated electrons. The radicals produced on scavenging this species by electron acceptors, such as aromatic hydrocarbons, nitro-compounds and azines have been studied by E.S.R. In most cases, the radicals from these solutes, the spectra of which are observed after elimination by warming of the radicals from the matrices, are produced by protonation of the anions formed by scavenging of electrons at 77 K. Thus, in the case of glassy solutions of nitro-compounds, the radicals R NO{sub 2}H are formed. They are characterized by a{sub N} = 15 G (nitrobenzene) or a{sub N} = 28 G (nitro-alkane). These radicals are also generated by U.V, photolysis at room temperature of solutions of nitro-compounds in alcohols and are shown to be the precursors of nitroxide radicals R - N - R (with N - O) observed simultaneously. Gamma irradiation of solutions of pyridine and of the three diazines, in alcohol glasses at 77 K, produces the radical formed by hydrogen addition to these compounds. The value of the coupling constant of the additional proton (7-10 G) indicates that it is bound to a nitrogen in the sp{sup 2} hydridation state. One has shown, taking pyridine as an example, that the addition to a carbon gives a much greater value of the coupling constant, of the order of 50-60 G. (author) [French] Les spectres de resonance paramagnetique electronique (R.P.E.) obtenus apres irradiation gamma, a 77 K, de verres organiques polaires tels que les alcools, comportent une bande unique centree a g {approx} 2, attribuable aux electrons solvates. On etudie par R.P.E. les radicaux provenant de leur capture par des solutes ayant une affinite electronique, en particulier les hydrocarbures aromatiques, les composes nitres et les azines. En general, les radicaux provenant de ces solutes, dont on observe les spectres apres elimination

Écrire dans la variante de l’autre : le cas de Sous les vents de Neptune de Fred Vargas

Directory of Open Access Journals (Sweden)

Nadine Vincent

2014-04-01

Full Text Available Pour tout auteur, choisir d’écrire dans une langue ou dans la variante d’une langue qui n’est pas la sienne représente un défi de taille. Nous nous intéresserons au roman Sous les vents de Neptune, de l’écrivaine française Fred Vargas, qui a situé une partie de son intrigue au Québec, sans maîtriser la notion de variation linguistique. En analysant les réactions des lecteurs européens et québécois, de même que les caractéristiques de la langue québécoise de Vargas, nous aborderons la question de l’impérialisme linguistique et de son anachronisme au xxie siècle.

A study by internal friction of defects produced in iron and nickel irradiated at very low temperatures; Etude au moyen du frottement interne des defauts crees par irradiation a tres basse temperature dans le fer et le nickel

Energy Technology Data Exchange (ETDEWEB)

Keating-Hart, G de [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-07-01

This work represents a contribution to the study of point defects in metals. After a brief review of the theory of internal friction we will discuss some technical innovations aimed at increasing the flexibility of the apparatus at our disposal. These innovations have allowed us to extend our range of measurements down to 20 deg. K. We will then discuss our experimental results. Firstly, we describe preliminary experiments on electron irradiated iron and the evidence for a laminar structure. Secondly, we present and account of the first measurements on nickel after neutron irradiation at 27 deg. K. We will compare the results with those obtained by other methods in this laboratory. Essentially we have observed transitory peaks at low temperature due to close Frenkel pairs and we have noticed the absence of a peak which would correspond to the magnetic after effect band of stage I{sub E}. An attempt is made to explain the disappearance of the observed peaks upon the application of an internal saturating magnetic field. (author) [French] Ce memoire constitue une contribution a l'etude des defauts ponctuels dans les metaux. Apres un bref apercu theorique sur le frottement interne, nous presenterons quelques realisations techniques destinees a accroitre les possibilites des instruments qui nous ont ete confies. Ces dernieres nous ont permis d'etendre la gamme des mesures jusqu'a 20 deg. K. Nous parlerons ensuite de nos resultats experimentaux. En premier lieu, ceux obtenus au cours de premieres experiences, sur le fer irradie aux electrons mettent en evidence des structures de laminage. En second lieu, nous exposerons les premieres mesures realisees sur du nickel irradie aux neutrons; nous comparerons ces resultats avec ceux obtenus par d'autres moyens experimentaux dans le laboratoire. Nous avons observe essentiellement des pics fugitifs a basse temperature dus aux paires proches de Frenckel et nous avons constate l'absence d'un pic correspondant a la bande de tramage

Comportement en vapocraquage de molécules modèles et de distillats sous vide hydrotraités. Deuxième partie : pyrolyse de molécules modèles représentatives des distillats sous vide bruts et hydrotraités Steam-Cracking Behavior of Model Molecules and Hydrotreated Vacuum Distillates Part Two: Pyrolysis of Model Molecules Representative of Unprocessed and Hydrotreated Vacuum Distillates

Directory of Open Access Journals (Sweden)

Freund E.

2006-11-01

Full Text Available La pyrolyse de molécules modèles a permis sur la base d'écarts de rendements obtenus entre le n -décane et leur mélange à 20 % avec celui-ci, l'établissement d'une échelle de potentialité de craquage présentée précédemment. L'approche des phénomènes de pyrolyse par des schémas réactionnels simplifiés est développée dans le présent article pour des molécules modèles, exemples de chaque grande famille susceptible de constituer le distillat sous vide : le perhydrophénanthrène pour les naphtènes lourds, l'octahydrophénanthrène symétrique pour les naphténoaromatiques, le naphtalène et l'alpha méthylnaphtalène pour les aromatiques méthylés ou non, le dodécylbenzène pour les aromatiques substitués par une longue chaîne aliphatique. Le cas de l'acénaphtylène a été examiné à part. On the basis of differences in yields obtained between n-decane and a 20% mixture of model molecules with n-decane, the pyrolysis of model molecules was used to determine a cracking potentiality scale that was previous described. The present article describes the approach to pyrolysis phenomena by simplified reaction mechanisms for model molecules taken from each major family liable to make up vacuum distillate, i. e. perhydrophenanthrene for heavy naphthenes, symmetrical octahydrophenanthrene for naphthenoaromatics, naphthalene and alpha-methynaphthalene for methylated or nonmethylated aromatics, dodecylbenzene for aromatics substituted for by a long aliphatic chain. The case of acenaphthylene is examined separately.

Contribution to the study of metallic impurities diffusion in a polymer film (KAPTON) under and out of irradiation; Contribution a l`etude de la diffusion d`impuretes metalliques dans un film polymere (KAPTON) sous et hors irradiation

Energy Technology Data Exchange (ETDEWEB)

Marin, N

1995-12-18

The main topic of this work is the diffusion behaviour in the polymer film Kapton, under and out of irradiation, of metallic coatings with different reactivity (copper, nickel, titanium) deposited by sputtering. The analysis of diffusion profiles has been performed by backscattering spectrometry, which, in association with cross-section microscopy, allows to connect the diffusion behaviour to the microscopic structure of the metal/Kapton interface. Generally speaking, the study under thermal annealing shows the importance of peculiarities of commercials polymers. In particular, additional elements they contain are liable to modify their surface characteristics and, as a consequence, diffusion. So, unlike observations in model polyimides, we show that even weakly reactive metals do not diffuse inside the polymer. Besides, there exists an energy threshold of Ar{sup +} used for sputtering, above which copper layers become very stable and so come up to industry`s expectation. The study under irradiation gives evidence for copper diffusion under irradiation, resulting in 15 mn mean radius spherical clusters inside the modified polymer. This fast diffusion is shown to be due to the concomitant effect of nuclear collisions and temperature. This study is also the opportunity to show dramatic radiation-induced effects in Kapton, more particularly a large modification of mechanical and optical properties with the loss of more volatile elements (H, N,O). With regard to methodology, this study shows the strong ambiguity in the RBS spectrum interpretation in the case of lateral non-uniformity, and we propose a model giving access to the statistical distribution of the non-uniform property of the target. (author). 262 refs., 99 figs., 8 appends.

Electromagnetic Gauge Study of Laser-Induced Shock Waves in Aluminium Alloys

Science.gov (United States)

Peyre, P.; Fabbro, R.

1995-12-01

The laser-shock behaviour of three industrial aluminum alloys has been analyzed with an Electromagnetic Gauge Method (EMV) for measuring the velocity of the back free surface of thin foils submitted to plane laser irradiation. Surface pressure, shock decay in depth and Hugoniot Elastic Limits (HEL) of the materials were investigated with increasing thicknesses of foils to be shocked. First, surface peak pressures values as a function of laser power density gave a good agreement with conventional piezoelectric quartz measurements. Therefore, comparison of experimental results with computer simulations, using a 1D hydrodynamic Lagrangian finite difference code, were also in good accordance. Lastly, HEL values were compared with static and dynamic compressive tests in order to estimate the effects of a very large range of strain rates (10^{-3} s^{-1} to 10^6 s^{-1}) on the mechanical properties of the alloys. Cet article fait la synthèse d'une étude récente sur la caractérisation du comportement sous choc-laser de trois alliages d'aluminium largement utilisés dans l'industrie à travers la méthode dite de la jauge électromagnétique. Cette méthode permet de mesurer les vitesses matérielles induites en face arrière de plaques d'épaisseurs variables par un impact laser. La mise en vitesse de plaques nous a permis, premièrement, de vérifier la validité des pressions d'impact superficielles obtenues en les comparant avec des résultats antérieurs obtenus par des mesures sur capteurs quartz. Sur des plaques d'épaisseurs croissantes, nous avons caractérisé l'atténuation des ondes de choc en profondeur dans les alliages étudiés et mesuré les limites d'élasticité sous choc (pressions d'Hugoniot) des alliages. Les résultats ont été comparés avec succès à des simulations numériques grâce à un code de calcul monodimensionnel Lagrangien. Enfin, les valeurs des pressions d'Hugoniot mesurées ont permis de tracer l'évolution des contraintes d

A continuous acceleration tube of ions under 200 KV; Un tube d'acceleration continue d'ions sous 200 KV

Energy Technology Data Exchange (ETDEWEB)

Mongodin, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1954-07-01

The realization of an Van de Graaff accelerator required, for the preliminary studies, the construction of a small proton accelerator, functioning at 200 kV in order to resolve some parasitic effects inherent to the accelerators tubes. The aim of this report is to describe the different organs of the accelerator tube, to explain the operating system and to encode their characteristics. The report first presents the ion source and the beam buncher permitting to inject in the accelerator tube particles of about 9 kV and very batched in a thin beam of circular section. Then the study explain the tube characteristics considered like optic system. A method to obtain precise calculation of particle trajectories is exposed. Aberrations of the system were discussed and balance of the currents on all electrodes inside the tube for different regimes of working were provided. The influence of the residual pressure in the tube were explained. The report finally ends on a part of the fundamental problem of the straining occurring inside the tubes accelerators under high tension. (M.B.) [French] La realisation d n accelerateur du type Van de Graaff a necessite, entre autres etudes preliminaires, la construction d'un petit accelerateur de protons, fonctionnant sous 200 kV afin d'eclaircir certains effets parasites propres aux tubes accelerateurs. L'objet de ce rapport est de decrire les differents organes du tube accelerateur, d'en expliquer le fonctionnement et de chiffrer leurs caracteristiques. Le memoire presente d'abord la source d'ions et le canon permettant d'injecter dans le tube accelerateur des particules de 9 kV environ et bien groupees dans un faisceau fin de section circulaire. Puis il passe a l'etude du tube considere comme systeme optique. Une methode utilisee pour le calcul precis des trajectoires des particules y est exposee. Il aborde le probleme des aberrations de ce systeme et fournit par la suite le bilan des courants sur toutes les electrodes a l

Irradiation probe and laboratory for irradiated material evaluation

International Nuclear Information System (INIS)

Smutny, S.; Kupca, L.; Beno, P.; Stubna, M.; Mrva, V.; Chmelo, P.

1975-09-01

The survey and assessment are given of the tasks carried out in the years 1971 to 1975 within the development of methods for structural materials irradiation and of a probe for the irradiation thereof in the A-1 reactor. The programme and implementation of laboratory tests of the irradiation probe are described. In the actual reactor irradiation, the pulse tube length between the pressure governor and the irradiation probe is approximately 20 m, the diameter is 2.2 mm. Temperature reaches 800 degC while the pressure control system operates at 20 degC. The laboratory tests (carried out at 20 degC) showed that the response time of the pressure control system to a stepwise pressure change in the irradiation probe from 0 to 22 at. is 0.5 s. Pressure changes were also studied in the irradiation probe and in the entire system resulting from temperature changes in the irradiation probe. Temperature distribution in the body of the irradiation probe heating furnace was determined. (B.S.)

Chapter 2: Irradiators

Energy Technology Data Exchange (ETDEWEB)

NONE

2018-04-01

The chapter 2 presents the subjects: 1) gamma irradiators which includes: Category-I gamma irradiators (self-contained); Category-II gamma irradiators (panoramic and dry storage); Category-III gamma irradiators (self-contained in water); Category-IV gamma irradiators (panoramic and wet storage); source rack for Category-IV gamma irradiators; product transport system for Category-IV gamma irradiators; radiation shield for gamma irradiators; 2) accelerators which includes: Category-I Accelerators (shielded irradiator); Category-II Accelerators (irradiator inside a shielded room); Irradiation application examples.

Formation mechanism of solute clusters under neutron irradiation in ferritic model alloys and in a reactor pressure vessel steel: clusters of defects; Mecanismes de fragilisation sous irradiation aux neutrons d'alliages modeles ferritiques et d'un acier de cuve: amas de defauts

Energy Technology Data Exchange (ETDEWEB)

Meslin-Chiffon, E

2007-11-15

The embrittlement of reactor pressure vessel (RPV) under irradiation is partly due to the formation of point defects (PD) and solute clusters. The aim of this work was to gain more insight into the formation mechanisms of solute clusters in low copper ([Cu] = 0.1 wt%) FeCu and FeCuMnNi model alloys, in a copper free FeMnNi model alloy and in a low copper French RPV steel (16MND5). These materials were neutron-irradiated around 300 C in a test reactor. Solute clusters were characterized by tomographic atom probe whereas PD clusters were simulated with a rate theory numerical code calibrated under cascade damage conditions using transmission electron microscopy analysis. The confrontation between experiments and simulation reveals that a heterogeneous irradiation-induced solute precipitation/segregation probably occurs on PD clusters. (author)

High vacuum high temperature x-ray camera (1961); Chambre de diffraction de rayons x a haute temperature sous vide pousse (1961)

Energy Technology Data Exchange (ETDEWEB)

Baron, J L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1961-07-01

- This camera makes it possible to carry out X-ray studies on highly oxidisable materials, up to about 900 deg. C. Most of the existing models do not provide sufficient protection against the formation of surface oxide or carbide films on the sample. The present arrangement makes it possible to operate at very low pressures: 5 x 10{sup -8} to 10{sup -7} torr, thanks to an entirely metallic apparatus. The radiation heating system consists of an incandescent lamp, outside the evacuated portion, and a reflector which concentrates the energetic flux into the sample through a silica window. The heated parts have thus only a small thermal inertia. With the apparatus it has been possible to determine the phase parameters of uranium-{alpha} up to 650 deg. C with a precision of {+-} 0.0015 A. A similar study has been carried out on a uranium-chromium alloy in the {beta}-phase up to 740 deg. C. (author) [French] Cette chambre permet l'etude, par diffraction de rayons X, de materiaux tres oxydables, ceci jusqu'a 900 deg. C environ. La plupart des modeles existant a l'heure actuelle n'assurent pas une protection suffisante de l'echantillon contre la formation de films superficiels d'oxydes ou de carbures. La disposition d'ensemble permet d'operer sous des pressions tres basses: 5.10{sup -8} a 10{sup -7} torr, grace a une construction entierement metallique. Le systeme de chauffage par rayonnement associe une lampe a incandescence, exterieure a l'enceinte sous vide, et un reflecteur, qui concentre le flux energetique sur l'echantillon, a travers un hublot de silice. Les pieces echauffees ne presentent ainsi qu'une faible inertie thermique. L'appareil a permis la determination des parametres de l'uranjum en phase a, jusqu'a 650 deg. C, avec une precision de {+-} 0,0015 A. Une etude similaire a ete effectuee sur un alliage uranium-chrome, en phase {beta}, jusqu'a 740 deg. C. (auteur)

Ions behaviour in a wilson chamber with internal self-command; Comportement des ions dans une chambre de wilson a autocommande interne

Energy Technology Data Exchange (ETDEWEB)

Laboulaye, H de; Tzara, C; Studinovski, J [Commissariat a l' Energie Atomique, Lab. du Fort de Chatillon, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1952-07-01

Study, with the help of a self-commanded chamber, of ions behaviors created in this one by a {alpha} particle. The authors put in evidence the phenomenon of multiplication and recover the required conditions for the working of the proportional counters. They verify that the ions reach quickly a steady aggregation state in their gas-steam mixture. These aggregations have a middle mobility of about 0,9 cm{sup 2}.V{sup -1}.sec{sup -1}. They signal an unexpected phenomenon that they assign at a thermodynamic reason. (author) [French] Etude, a l'aide d'une chambre autocommandee, du comportement des ions crees dans celle-ci par une particule {alpha}. Les auteurs mettent en evidence le phenomene de multiplication et retrouvent les conditions requises pour le fonctionnement des compteurs proportionnels. Ils verifient que les ions atteignent rapidement un etat d'agregat stable dans leur melange gaz-vapeur. Ces agregats ont une mobilite moyenne d'environ 0,9 cm{sup 2}.V{sup -1}.sec{sup -1}. Ils signalent un phenomene inattendu qu'ils attribuent a une cause thermodynamique. (auteur)

Theoretical study of silicon carbide under irradiation at the nano scale: classical and ab initio modelling; Etude theorique a l'echelle nanometrique du carbure de silicium sous irradiation: modelisation classique et ab initio

Energy Technology Data Exchange (ETDEWEB)

Lucas, G

2006-10-15

The behaviour of silicon carbide under irradiation has been studied using classical and ab initio simulations, focusing on the nano scale elementary processes. First, we have been interested in the calculation of threshold displacement energies, which are difficult to determine both experimentally and theoretically, and also the associated Frenkel pairs. In the framework of this thesis, we have carried out simulations in classical and ab initio molecular dynamics. For the classical approach, two types of potentials have been used: the Tersoff potential, which led to non satisfactory results, and a new one which has been developed during this thesis. This potential allows a better modelling of SiC under irradiation than most of the empirical potentials available for SiC. It is based on the EDIP potential, initially developed to describe defects in silicon, that we have generalized to SiC. For the ab initio approach, the feasibility of the calculations has been validated and average energies of 19 eV for the C and 38 eV for the Si sublattices have been determined, close to the values empirically used in the fusion community. The results obtained with the new potential EDIP are globally in agreement with those values. Finally, the elementary processes involved in the crystal recovery have been studied by calculating the stability of the created Frenkel pairs and determining possible recombination mechanisms with the nudged elastic band method. (author)

Food irradiation

International Nuclear Information System (INIS)

Sato, Tomotaro; Aoki, Shohei

1976-01-01

Definition and significance of food irradiation were described. The details of its development and present state were also described. The effect of the irradiation on Irish potatoes, onions, wiener sausages, kamaboko (boiled fish-paste), and mandarin oranges was evaluated; and healthiness of food irradiation was discussed. Studies of the irradiation equipment for Irish potatoes in a large-sized container, and the silo-typed irradiation equipment for rice and wheat were mentioned. Shihoro RI center in Hokkaido which was put to practical use for the irradiation of Irish potatoes was introduced. The state of permission of food irradiation in foreign countries in 1975 was introduced. As a view of the food irradiation in the future, its utilization for the prevention of epidemics due to imported foods was mentioned. (Serizawa, K.)

Food irradiation

Energy Technology Data Exchange (ETDEWEB)

Gruenewald, T

1985-01-01

Food irradiation has become a matter of topical interest also in the Federal Republic of Germany following applications for exemptions concerning irradiation tests of spices. After risks to human health by irradiation doses up to a level sufficient for product pasteurization were excluded, irradiation now offers a method suitable primarily for the disinfestation of fruit and decontamination of frozen and dried food. Codex Alimentarius standards which refer also to supervision and dosimetry have been established; they should be adopted as national law. However, in the majority of cases where individual countries including EC member-countries so far permitted food irradiation, these standards were not yet used. Approved irradiation technique for industrial use is available. Several industrial food irradiation plants, partly working also on a contractual basis, are already in operation in various countries. Consumer response still is largely unknown; since irradiated food is labelled, consumption of irradiated food will be decided upon by consumers.

Plattlet atmosphere - study of factors 2 and 7 - modifications brought about by X-rays

International Nuclear Information System (INIS)

Hollard, D.; Darnault, J.; Rambaud, F.; Suscillon, M.; Marcille, G.

1966-01-01

After a quantitative measure of factor II and VII adsorbed at the platelet surface, the authors study the comportment of these factors opposite to: un-numerous washes, irradiations of 0 to 70000 R. It appears that these factors are not solidly fixed at the platelet as: 10 washes are sufficient to get rid of each of the 2 factors; 1500 R overthrow factor VII; 40000 R are necessary to suppress F II. (author) [fr

Micromechanical simulation of Uranium dioxide polycrystalline aggregate behaviour under irradiation; Modele numerique micro-mecanique d'agregat polycristallin pour le comportement des combustibles oxydes

Energy Technology Data Exchange (ETDEWEB)

Pacull, J.

2011-02-15

In pressurized water nuclear power reactor (PWR), the fuel rod is made of dioxide of uranium (UO{sub 2}) pellet stacked in a metallic cladding. A multi scale and multi-physic approaches are needed for the simulation of fuel behavior under irradiation. The main phenomena to take into account are thermomechanical behavior of the fuel rod and chemical-physic behavior of the fission products. These last years one of the scientific issue to improve the simulation is to take into account the multi-physic coupling problem at the microscopic scale. The objective of this ph-D study is to contribute to this multi-scale approach. The present work concerns the micro-mechanical behavior of a polycrystalline aggregate of UO{sub 2}. Mean field and full field approaches are considered. For the former and the later a self consistent homogenization technique and a periodic Finite Element model base on the 3D Voronoi pattern are respectively used. Fuel visco-plasticity is introduced in the model at the scale of a single grain by taking into account specific dislocation slip systems of UO{sub 2}. A cohesive zone model has also been developed and implemented to simulate grain boundary sliding and intergranular crack opening. The effective homogenous behaviour of a Representative Volume Element (RVE) is fitted with experimental data coming from mechanical tests on a single pellet. Local behavior is also analyzed in order to evaluate the model capacity to assess micro-mechanical state. In particular, intra and inter granular stress gradient are discussed. A first validation of the local behavior assessment is proposed through the simulation of intergranular crack opening measured in a compressive creep test of a single fuel pellet. Concerning the impact of the microstructure on the fuel behavior under irradiation, a RVE simulation with a representative transient loading of a fuel rod during a power ramp test is achieved. The impact of local stress and strain heterogeneities on the multi

Food irradiation

International Nuclear Information System (INIS)

Lindqvist, H.

1996-01-01

This paper is a review of food irradiation and lists plants for food irradiation in the world. Possible applications for irradiation are discussed, and changes induced in food from radiation, nutritional as well as organoleptic, are reviewed. Possible toxicological risks with irradiated food and risks from alternative methods for treatment are also brought up. Ways to analyze weather food has been irradiated or not are presented. 8 refs

Étude du comportement structural de l'alliage NC 19 Fe Nb (Inconel 718)

Science.gov (United States)

Slama, C.; Cizeron, G.

1997-03-01

In the as-received state (following a double treatment at 720 and 620 °C), the structure of INC 718 consists of a γ matrix, intergranular β precipitates and (Nb,Ti)C carbides; moreover, γ{'} and γ{''} phases have precipitated in the matrix. Using different methods, the structural behaviour was analyzed which led to distinguish the temperature ranges in which occurs precipitation or dissolution of β, γ{'} and γ{''} phases on heating and to define the optimum conditions of homogeneization. Furthermore a CCT diagram for INC 718 has been drawn showing the respective precipitation of γ{'}, γ{''} and β phases as a function of the cooling rate applied from 990 °C. L'étude de l'alliage Inconel 718 (NC 19 Fe Nb) a permis de montrer que sa structure, dans l'état de livraison (après double revenu à 720 puis 620 °C), consiste en une matrice γ avec des précipités β intergranulaires et des carbures du type (Nb,Ti) C ; en outre, la matrice contient des précipités des phases γ{''} et γ{'}. L'analyse du comportement structural de l'alliage à l'aide de différentes méthodes physiques a conduit à délimiter les domaines de température dans lesquels interviennent, au chauffage, la précipitation ou la dissolution des phases β, γ{'}, γ{''} et de définir les conditions optimales d'homogénéisation. Le diagramme T.R.C. de l'Inconel 718 a ensuite été tracé : les intervalles de température dans lesquels interviennent les précipitations respectives des phases γ{'}, γ{''} et β en fonction de la vitesse de refroidissement imposée depuis 990 °C, ont ainsi pu être précisés.

Ethylene Polymerization by Gamma Irradiation; Polymerisation de l'ethylene par irradiation; Polimerizatsiya ehtilen a pod vliyaniem gamma-izlucheniya; Polimerizacion del etileno por irradiacion gamma

Energy Technology Data Exchange (ETDEWEB)

Medvedev, S S; Abkin, A D; Khomikovsky, P M [Fiziko-khimicheskij institut im. Karpova, SSSR, Moscow, Union of Soviet Socialist Republics (Russian Federation)

1960-07-15

polymerisation de l'ethylene irradie par une source de cobalt-60, en milieu gazeux, en faisant varier la pression (de 50 a 300 atmospheres), l'intensite d'irradiation (de 20 a 160 roentgens par seconde) et la temperature (de zero a 50{sup o} C). La vitesse du processus, le rendement radiochimique et le poids moleculaire moyen des polymeres accusent une augmentation brusque avec la pression (entre 50 et 200 atmospheres la vitesse de polymerisation est proportionnelle a la concentration de l'ethylene elevee a la quatrieme puissance). La vitesse de polymerisation ne depend que faiblement de l'intensite d'irradiation (elle n'est proportionnelle qu'a l'intensite d'irradiation elevee a la puissance 0,3) alors que le rendement radiochimique et le poids moleculaire moyen des polymeres s'accroissent a mesure que l'intensite d'irradiation diminue. La vitesse du processus et le poids moleculaire accusent une certaine augmentation a mesure que la temperature s'accroit. Les explications possibles des regularites cinetiques observees sont examinees dans le rapport. Le polyethylene obtenu par irradiation se distingue du polyethylene forme sous pression elevee par un accroissement de la densite et du degre de cristallisation. Le polymere qui a une viscosite caracteristique superieure a l'unite (obtenue a une pression de 100 a 200 atmospheres) a les memes proprietes chimiques que le polyethylene forme sous haute pression. (author) [Spanish] Se estudia en este trabajo el proceso de polimerizacion radioinducida del etileno. A fin de acelerar dicho proceso, la reaccion se inicio en soluciones de compuestos organicos: alcoholes, cetonas e hidrocarburos alifaticos. Se demuestra que a una presion constante de 50 atmosferas y a temperatura ambiente, la velocidad de la reaccion en solucion es de diez a quince veces mayor que en fase gaseosa. Los autores han estudiado en detalle la polimerizacion del etileno irradiado con ayuda de una fuente de cobalto-60 en fase gaseosa; para ello, modificaron la

Irradiation proctitis

International Nuclear Information System (INIS)

Minami, Akira

1977-01-01

Literatures on late rectal injuries are discussed, referring to two patients with uterine cervical cancer in whom irradiation proctitis occurred after telecobalt irradiation following uterine extirpation. To one patients, a total of 5000 rads was irradiated, dividing into 250 rads at one time, and after 3 months, irradiation with a total of 2000 rads, dividing into 200 rads at one time, was further given. In another one patient, two parallel opposing portal irradiation with a total of 6000 rads was given. About a year after the irradiation, rectal injuries and cystitis, accompanying with hemorrhage, were found in both of the patients. Rectal amputation and proctotoreusis were performed. Cystitis was treated by cystic irradiation in the urological department. Pathohistological studies of the rectal specimen revealed atrophic mucosa, and dilatation of the blood vessels and edema in the colonic submucosa. Incidence of this disease, term when the disease occurs, irradiation dose, type of the disease, treatment and prevention are described on the basis of the literatures. (Kanao, N.)

Irradiation proctitis

Energy Technology Data Exchange (ETDEWEB)

Minami, A [Osaka Kita Tsishin Hospital (Japan)

1977-06-01

Literatures on late rectal injuries are discussed, referring to two patients with uterine cervical cancer in whom irradiation proctitis occurred after telecobalt irradiation following uterine extirpation. To one patients, a total of 5000 rads was irradiated, dividing into 250 rads at one time, and after 3 months, irradiation with a total of 2000 rads, dividing into 200 rads at one time, was further given. In another one patient, two parallel opposing portal irradiation with a total of 6000 rads was given. About a year after the irradiation, rectal injuries and cystitis, accompanying with hemorrhage, were found in both of the patients. Rectal amputation and proctotoreusis were performed. Cystitis was treated by cystic irradiation in the urological department. Pathohistological studies of the rectal specimen revealed atrophic mucosa, and dilatation of the blood vessels and edema in the colonic submucosa. Incidence of this disease, term when the disease occurs, irradiation dose, type of the disease, treatment and prevention are described on the basis of the literatures.

Influence of Citric Acid on the Pink Color and Characteristics of Sous Vide Processed Chicken Breasts During Chill Storage

Science.gov (United States)

Lim, Ki-Won

2015-01-01

Chicken breast dipped with citric acid (CA) was treated by sous vide processing and stored in a refrigerated state for 0, 3, 6, 9, and 14 d. A non-dipped control group (CON) and three groups dipped in different concentrations of citric acid concentration were analyzed (0.5%, 0.5CIT; 2.0%, 2CIT and 5.0%, 5CIT; w/v). Cooking yield and moisture content increased due to the citric acid. While the redness of the juice and meat in all groups showed significant increase during storage, the redness of the citric acid groups was reduced compared to the control group (pacid reactive substances (TBARS) were generally lower in the citric acid-treated samples than in untreated ones, indicating extended shelf life of the cooked chicken breast dipped in citric acid solution. The shear force of the 2CIT and 5CIT groups was significantly lower (pcitric acid concentrations. PMID:26761885

Food irradiation

International Nuclear Information System (INIS)

Soothill, R.

1987-01-01

The issue of food irradiation has become important in Australia and overseas. This article discusses the results of the Australian Consumers' Association's (ACA) Inquiry into food irradiation, commissioned by the Federal Government. Issues discussed include: what is food irradiation; why irradiate food; how much food is consumer rights; and national regulations

Synthèse bibliographique sur le comportement de recherche de l’hôte chez la punaise de lit (Cimex lectularius) et applications dans le cadre de la lutte intégrée

OpenAIRE

Legrand, Pauline; Verheggen, François; Haubruge, Eric; Francis, Frédéric

2016-01-01

Cette étude analyse le comportement de recherche de l’hôte chez la punaise de lit, Cimex lectularius, en portant une attention particulière sur les stimuli émis par l’Homme et impliqués dans ce processus d’orientation. Elle met également en évidence les applications possibles en matière de lutte intégrée. La punaise de lit est un ectoparasite exclusivement hématophage étroitement lié à l’Homme depuis des millénaires. Lors de sa recherche alimentaire, cet insecte utilise des stimuli émis pa...

Evaluation of irradiation hardening of proton irradiated stainless steels by nanoindentation

International Nuclear Information System (INIS)

Yabuuchi, Kiyohiro; Kuribayashi, Yutaka; Nogami, Shuhei; Kasada, Ryuta; Hasegawa, Akira

2014-01-01

Ion irradiation experiments are useful for investigating irradiation damage. However, estimating the irradiation hardening of ion-irradiated materials is challenging because of the shallow damage induced region. Therefore, the purpose of this study is to prove usefulness of nanoindentation technique for estimation of irradiation hardening for ion-irradiated materials. SUS316L austenitic stainless steel was used and it was irradiated by 1 MeV H + ions to a nominal displacement damage of 0.1, 0.3, 1, and 8 dpa at 573 K. The irradiation hardness of the irradiated specimens were measured and analyzed by Nix–Gao model. The indentation size effect was observed in both unirradiated and irradiated specimens. The hardness of the irradiated specimens changed significantly at certain indentation depths. The depth at which the hardness varied indicated that the region deformed by the indenter had reached the boundary between the irradiated and unirradiated regions. The hardness of the irradiated region was proportional to the inverse of the indentation depth in the Nix–Gao plot. The bulk hardness of the irradiated region, H 0 , estimated by the Nix–Gao plot and Vickers hardness were found to be related to each other, and the relationship could be described by the equation, HV = 0.76H 0 . Thus, the nanoindentation technique demonstrated in this study is valuable for measuring irradiation hardening in ion-irradiated materials

Applications of sub-optimality in dynamic programming to location and construction of nuclear fuel processing plant; Application de la sous-optimalite en programmation dynamique a la localisation et la cadence optimales de construction des equipements

Energy Technology Data Exchange (ETDEWEB)

Thiriet, L; Deledicq, A [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires, section des etudes economiques generales

1968-09-01

First, the point of applying Dynamic Programming to optimization and Operational Research problems in chemical industries are recalled, as well as the conditions in which a dynamic program is illustrated by a sequential graph. A new algorithm for the determination of sub-optimal politics in a sequential graph is then developed. Finally, the applications of sub-optimality concept is shown when taking into account the indirect effects related to possible strategies, or in the case of stochastic choices and of problems of the siting of plants... application examples are given. (authors) [French] On rappelle d'abord l'interet de la Programmation Dynamique dans les problemes d'optimisation et de Recherche Operationnelle dans les industries chimiques, et les conditions de representation d'un programme dynamique par un graphe sequentiel. On expose ensuite un nouvel algorithme de determination de politiques sous-optimales dans un graphe sequentiel. On montre enfin les applications du concept de sous-optimalite a la prise en compte d'effets indirects lies aux politiques possibles, aux choix dans l'aleatoire, a des problemes de localisation optimale d'usines... et on donne des exemples d'utilisation. (auteurs)

The dynamic behaviour of heat exchangers; Etude du comportement dynamique des echangeurs de chaleur

Energy Technology Data Exchange (ETDEWEB)

Fonteray, J; Rozenholc, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-07-01

In order to study the dynamics of nuclear power plants, one needs mathematical models made up of ordinary differential equations. This report deals with models for heat exchangers. These models allow exact evaluations of the temperatures for any steady state. The deformation of the temperature maps during transients is taken into account. To do this, average temperatures are evaluated keeping In mind, on one hand the partial differential equations, on the other hand, the physical phenomenons which are involved. Seven ordinary differential equations at most, are necessary for one heat exchanger. Theses models were compared with mathematically exact ones and also with experimental results, that EDF was able to measure on EDF-1 heat exchangers. The results appear to be correct. (authors) [French] Les etudes de dynamique sur les centrales nucleaires exigent l'elaboration de modeles apparaissant sous forme d'equations differentlelles ordinaires. Ce rapport est consacre a la recherche de modeles d'echangeurs. Dans ces modeles les temperatures sont calculees exactement pour n'importe quel regime permanent. Pour tenir compte de la deformation des distributions de temperature en regime transitoire, on evalue les temperatures moyennes dans l'echangeur en s'appuyant, d'une part, sur les equations aux derivees partielles et, d'autre part, sur une analyse des phenomenes physiques. Les modeles contiennent au plus sept equations differentielles ordinaires. Ces modeles ont ete compares aux modeles mathematiques exacts et aussi a des resultats experimentaux, obtenus par l'EDF, sur les echangeurs d'EDF-1. Les resultats paraissent satisfaisants. (auteurs)

Post irradiation test report of irradiated DUPIC simulated fuel

International Nuclear Information System (INIS)

Yang, Myung Seung; Jung, I. H.; Moon, J. S. and others

2001-12-01

The post-irradiation examination of irradiated DUPIC (Direct Use of Spent PWR Fuel in CANDU Reactors) simulated fuel in HANARO was performed at IMEF (Irradiated Material Examination Facility) in KAERI during 6 months from October 1999 to March 2000. The objectives of this post-irradiation test are i) the integrity of the capsule to be used for DUPIC fuel, ii) ensuring the irradiation requirements of DUPIC fuel at HANARO, iii) performance verification in-core behavior at HANARO of DUPIC simulated fuel, iv) establishing and improvement the data base for DUPIC fuel performance verification codes, and v) establishing the irradiation procedure in HANARO for DUPIC fuel. The post-irradiation examination performed are γ-scanning, profilometry, density, hardness, observation the microstructure and fission product distribution by optical microscope and electron probe microanalyser (EPMA)

Facts about food irradiation: Irradiated foods and the consumer

International Nuclear Information System (INIS)

1991-01-01

This fact sheet discusses market testing of irradiate food, consumer response to irradiated products has always been positive, and in some countries commercial quantities of some irradiated food items have been sold on a regular basis. Consumers have shown no reluctance to buy irradiated food products. 4 refs

Stress corrosion cracking of Inconel in high temperature water; Corrosion fissurante sous contrainte de l'Inconel dans l'eau a haute temperature

Energy Technology Data Exchange (ETDEWEB)

Coriou,; Grall,; Gall, Le; Vettier, [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

Some Inconel samples were subjected to hot water corrosion testing (350 deg. C), under stress slightly above the elastic limit. It has been observed that different types of alloys - with or without titanium - could suffer serious intergranular damage, including a complete rupture, within a three months period. In one case, we observed an unusual intergranular phenomenon which appeared quite different from common intergranular corrosion. (author) [French] Des essais de corrosion d'Inconel sont realises dans l'eau a 350 deg. C, et sous contrainte legerement superieure a la limite elastique. On constate que differentes varietes d'alliage avec ou sans titane donnent lieu a des accidents intergranulaires graves allant jusqu'a rupture complete en 3 mois. Dans un cas, on observe un phenomene intergranulaire particulier tres different de la corrosion intergranulaire classique. (auteur)

Food irradiation

International Nuclear Information System (INIS)

Matsuyama, Akira

1990-01-01

This paper reviews researches, commentaries, and conference and public records of food irradiation, published mainly during the period 1987-1989, focusing on the current conditions of food irradiation that may pose not only scientific or technologic problems but also political issues or consumerism. Approximately 50 kinds of food, although not enough to fill economic benefit, are now permitted for food irradiation in the world. Consumerism is pointed out as the major factor that precludes the feasibility of food irradiation in the world. In the United States, irradiation is feasible only for spices. Food irradiation has already been feasible in France, Hollands, Belgium, and the Soviet Union; has under consideration in the Great Britain, and has been rejected in the West Germany. Although the feasibility of food irradiation is projected to increase gradually in the future, commercial success or failure depends on the final selection of consumers. In this respect, the role of education and public information are stressed. Meat radicidation and recent progress in the method for detecting irradiated food are referred to. (N.K.) 128 refs

Gamma Irradiation does not Cause Carcinogenesis of Irradiated Herbs

International Nuclear Information System (INIS)

Thongphasuk, Jarunee; Thongphasuk, Piyanuch; Eamsiri, Jarurut; Pongpat, Suchada

2009-07-01

Full text: Microbial contamination of medicinal herbs can be effectively reduced by gamma irradiation. Since irradiation may cause carcinogenicity of the irradiated herbs, the objective of this research is to study the effect of gamma irradiation (10 and 25 kGy) from cobalt-60 on carcinogenicity. The herbs studied were Pueraria candollei Grah., Curcuma longa Linn. Zingiber montanum, Senna alexandrina P. Miller, Eurycoma Longifolia Jack, Gymnostema pentaphylum Makino, Ginkgo biloba, Houttuynia cordata T., Andrographis paniculata, Thunbergia laurifolia L., Garcinia atroviridis G., and Cinnamomum verum J.S.Presl. The results showed that gamma irradiation at the dose of 10 and 25 kGy did not cause carcinogenicity of the irradiated herbs

Food irradiation

International Nuclear Information System (INIS)

Duchacek, V.

1989-01-01

The ranges of doses used for food irradiation and their effect on the processed foods are outlined. The wholesomeness of irradiated foods is discussed. The present food irradiation technology development in the world is described. A review of the irradiated foods permitted for public consumption, the purposes of food irradiaton, the doses used and a review of the commercial-scale food irradiators are tabulated. The history and the present state of food processing in Czechoslovakia are described. (author). 1 fig., 3 tabs., 13 refs

Study of the behaviour of artificial radioactive aerosols. Applications to some problems of atmospheric circulation (1963); Etude du comportement dcs aerosols radioactifs artificiels. Applications a quelques problemes de circulation atmospherique (1963)

Energy Technology Data Exchange (ETDEWEB)

Lambert, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-11-15

The aim of this work, consists in the examination of the behaviour of radioactive aerosols produced in the atmosphere by nuclear explosions, in order to deduce the most general laws governing atmospheric circulation and diffusion. After having given a general table of the radioactive aerosols present the authors consider the validity and the precision of the measurement methods and the concentration of the aerosols at ground level and in the upper atmosphere, as well as their deposition on the ground. The existence is thus demonstrated of a tropospheric equatorial barrier and of discontinuous and seasonal aspects of stratosphere-troposphere transfers. The role is shown of precipitations and dry auto-filtration in the lower atmosphere cleaning processes. This work makes it possible to describe the general behaviour of dust from the stratosphere, and to improve the total radioactive contamination of the globe. (author) [French] L'objectif de ce travail consiste a examiner le comportement des aerosols radioactifs introduits dans l'atmosphere par les explosions nucleaires, pour en deduire les lois les plus generals de la circulation et diffusion atmospheriques. Apres avoir dresse un tableau d'ensemble des aerosols radioactifs presents, on examine la validite et la precision des methodes de mesure de leur concentration, au niveau du sol et en haute atmosphere, ainsi que de leur depot a la surface du sol. On met ainsi en evidence l'existence d'une barriere equatoriale tropospherique; l'aspect discontinu et saisonnier des transferts stratosphere-troposphere; le role des precipitations et de l'auto-filtration seche, dans les processus de nettoyage de la basse atmosphere. Ces etudes permettent de decrire le comportement general des poussieres d'origine stratospherique et d'ameliorer le bilan de la contamination radioactive du globe. (auteur)

Study of the behaviour of artificial radioactive aerosols. Applications to some problems of atmospheric circulation (1963); Etude du comportement dcs aerosols radioactifs artificiels. Applications a quelques problemes de circulation atmospherique (1963)

Energy Technology Data Exchange (ETDEWEB)

Lambert, G. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-11-15

The aim of this work, consists in the examination of the behaviour of radioactive aerosols produced in the atmosphere by nuclear explosions, in order to deduce the most general laws governing atmospheric circulation and diffusion. After having given a general table of the radioactive aerosols present the authors consider the validity and the precision of the measurement methods and the concentration of the aerosols at ground level and in the upper atmosphere, as well as their deposition on the ground. The existence is thus demonstrated of a tropospheric equatorial barrier and of discontinuous and seasonal aspects of stratosphere-troposphere transfers. The role is shown of precipitations and dry auto-filtration in the lower atmosphere cleaning processes. This work makes it possible to describe the general behaviour of dust from the stratosphere, and to improve the total radioactive contamination of the globe. (author) [French] L'objectif de ce travail consiste a examiner le comportement des aerosols radioactifs introduits dans l'atmosphere par les explosions nucleaires, pour en deduire les lois les plus generals de la circulation et diffusion atmospheriques. Apres avoir dresse un tableau d'ensemble des aerosols radioactifs presents, on examine la validite et la precision des methodes de mesure de leur concentration, au niveau du sol et en haute atmosphere, ainsi que de leur depot a la surface du sol. On met ainsi en evidence l'existence d'une barriere equatoriale tropospherique; l'aspect discontinu et saisonnier des transferts stratosphere-troposphere; le role des precipitations et de l'auto-filtration seche, dans les processus de nettoyage de la basse atmosphere. Ces etudes permettent de decrire le comportement general des poussieres d'origine stratospherique et d'ameliorer le bilan de la contamination radioactive du globe. (auteur)

Organisation of biological research carried out in the United States by the A.E.C. or under her contract (1960); Organisation des recherches biologiques menees aux Etats-Unis par l'A.E.C. ou sous son egide. Compte-rendu sommaire d'une mission d'etude (1960)

Energy Technology Data Exchange (ETDEWEB)

Pellerin, J. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

This report is based on information gathered in the course of a trip to the United States, in November and December 1958 which consisted chiefly of visits to the main biological and medical research laboratories and discussions with the heads of these establishments. A description is given of the general organisation of the Atomic Energy Commission's Division of Biology and Medicine, and of the distribution of responsibility for radiation protection work and for biological, medical and agricultural research amongst the various Services attached to it; this is followed by a more detailed account of the activities carried on in this field at the great national laboratories. Finally, the systems of collaboration set up with external research organisations in the form of research contracts are examined, together with the substantial help provided by the A.E.C. for biological, medical and agricultural research in general, owing to a systematic policy of subsidising the distribution of radioisotopes for this purpose. (author) [French] Le present rapport a ete etabli sur la base des renseignements recueillis au cours d'un voyage d'etude aux Etats-Unis, en novembre et decembre 1958, comportant notamment la visite des principaux laboratoires de recherche biologique et medicale et des entretiens avec les principaux responsables de ces laboratoires. Apres une description de l'organisation generale de la 'Division of Biology and Medicine' de l'Atomic Energy Commission et de la repartition entre les divers Services qui lui sont rattaches des responsabilites concernant la protection contre les radiations et la Recherche biologique, medicale et agronomique, des indications plus detaillees sont donnees au sujet des activites poursuivies dans ce domaine au sein des grands laboratoires nationaux. Sont examinees enfin, l'importance et les modalites de la collaboration instituee avec les Organismes de Recherche exterieurs sous la forme de

Irradiated foods

International Nuclear Information System (INIS)

Darrington, Hugh

1988-06-01

This special edition of 'Food Manufacture' presents papers on the following aspects of the use of irradiation in the food industry:- 1) an outline view of current technology and its potential. 2) Safety and wholesomeness of irradiated and non-irradiated foods. 3) A review of the known effects of irradiation on packaging. 4) The problems of regulating the use of irradiation and consumer protection against abuse. 5) The detection problem - current procedures. 6) Description of the Gammaster BV plant in Holland. 7) World outline review. 8) Current and future commercial activities in Europe. (U.K.)

Ions behaviour in a wilson chamber with internal self-command; Comportement des ions dans une chambre de wilson a autocommande interne

Energy Technology Data Exchange (ETDEWEB)

Laboulaye, H. de; Tzara, C.; Studinovski, J. [Commissariat a l' Energie Atomique, Lab. du Fort de Chatillon, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1952-07-01

Study, with the help of a self-commanded chamber, of ions behaviors created in this one by a {alpha} particle. The authors put in evidence the phenomenon of multiplication and recover the required conditions for the working of the proportional counters. They verify that the ions reach quickly a steady aggregation state in their gas-steam mixture. These aggregations have a middle mobility of about 0,9 cm{sup 2}.V{sup -1}.sec{sup -1}. They signal an unexpected phenomenon that they assign at a thermodynamic reason. (author) [French] Etude, a l'aide d'une chambre autocommandee, du comportement des ions crees dans celle-ci par une particule {alpha}. Les auteurs mettent en evidence le phenomene de multiplication et retrouvent les conditions requises pour le fonctionnement des compteurs proportionnels. Ils verifient que les ions atteignent rapidement un etat d'agregat stable dans leur melange gaz-vapeur. Ces agregats ont une mobilite moyenne d'environ 0,9 cm{sup 2}.V{sup -1}.sec{sup -1}. Ils signalent un phenomene inattendu qu'ils attribuent a une cause thermodynamique. (auteur)

Contribution to the study of the behaviour of silicon planar transistors exposed to the {sup 60}Co {gamma} rays; Contribution a l'etude du comportement des transistors silicium a structure plane soumis aux rayons {gamma} du {sup 60}Co

Energy Technology Data Exchange (ETDEWEB)

Le Ber, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-05-15

This report gives an account of studies carried out on bipolar silicon planar transistors irradiated by {sup 60}Co {gamma} rays. The author describes the interactions on the matter of the different types of particles and he gives a brief bibliographical recall of foreign studies. The technological structure of the planar transistors is then described in order to help the understanding of the phenomena, general comments are made about the choice of measured parameters and on the statistical interpretation of results. An automatic instrument for the measurement of the gain is described and the reproducibility of the results is stated The complexity of the problem and the difficulty to predict the behaviour of the semiconductors components are clearly shown. It is stated that the observed dispersions depend on: - the electrical bias during irradiation - the injection level in the emitter-base junction during the measurement - the manufacturer for a given type - the instantaneous dose rate - the geometry used The problem is then examined from the reliability point of view and methods are given to evaluate the reliability for a given dose - 'Worst case' method - moment method - Monte Carlo method. (author) [French] Ce rapport rend compte du travail effectue sur les transistors bipolaires au silicium irradies au rayons {gamma} du cobalt 60. On passe en revue les mecanismes d'interaction des differents rayonnements avec la matiere et on fait un bref rappel bibliographique des etudes effectuees a l'etranger. On decrit ensuite la structure technologique du transistor pour aider a la comprehension des phenomenes, puis on donne des generalites sur le choix des parametres mesures et l'interpretation statistique des resultats. On decrit l'ensemble du systeme de mesure de gain et on s'attache a montrer la reproductibilite des mesures. Les resultats experimentaux mentionnes etablissent clairement la complexite du probleme et la difficulte qu'il y a de faire des previsions. On

Méthode multi-échelle pour la modélisation du flambage des tôles minces sous contraintes résiduelles - Application au laminage

OpenAIRE

Nakhoul , Rebecca; Montmitonnet , Pierre; Potier-Ferry , Michel

2013-01-01

National audience; Dans le laminage à froid, l'apparition d'une distribution hétérogène de contraintes résiduelles peut engendrer le flambage de la tôle laminée, entraînant un " défaut de planéité ". L'objectif est de définir un modèle macroscopique simple décrivant les modes et amplitudes de flambage d'une tôle sous l'effet des contraintes résiduelles issues du laminage. Le présent article présente une nouvelle méthode bi-échelle [1,2] comme une alternative du modèle de flambage développé da...

Storage tests with irradiated and non-irradiated onions

International Nuclear Information System (INIS)

Gruenewald, T.; Rumpf, G.; Troemel, I.; Bundesforschungsanstalt fuer Ernaehrung, Karlsruhe

1978-07-01

The results of several test series on the storage of irradiated and non-irradiated German grown onion are reported. Investigated was the influence of the irradiation conditions such as time and dose and of the storage conditions on sprouting, spoilage, browning of the vegetation centres, composition of the onions, strength and sensorial properties of seven different onion varieties. If the onions were irradiated during the dormancy period following harvest, a dose of 50 Gy (krad) was sufficient to prevent sprouting. Regarding the irradiated onions, it was not possible by variation of the storage conditions within the limits set by practical requirements to extend the dormancy period or to prevent browning of the vegetation centres, however. (orig.) 891 MG 892 RSW [de

Food irradiation

International Nuclear Information System (INIS)

Anon.

1985-01-01

The article explains what radiation does to food to preserve it. Food irradiation is of economic importance to Canada because Atomic Energy of Canada Limited is the leading world supplier of industrial irradiators. Progress is being made towards changing regulations which have restricted the irradiation of food in the United States and Canada. Examples are given of applications in other countries. Opposition to food irradiation by antinuclear groups is addressed

Mechanical and irradiation properties of zirconium alloys irradiated in HANARO

International Nuclear Information System (INIS)

Kwon, Oh Hyun; Eom, Kyong Bo; Kim, Jae Ik; Suh, Jung Min; Jeon, Kyeong Lak

2011-01-01

These experimental studies are carried out to build a database for analyzing fuel performance in nuclear power plants. In particular, this study focuses on the mechanical and irradiation properties of three kinds of zirconium alloy (Alloy A, Alloy B and Alloy C) irradiated in the HANARO (High-flux Advanced Neutron Application Reactor), one of the leading multipurpose research reactors in the world. Yield strength and ultimate tensile strength were measured to determine the mechanical properties before and after irradiation, while irradiation growth was measured for the irradiation properties. The samples for irradiation testing are classified by texture. For the irradiation condition, all samples were wrapped into the capsule (07M-13N) and irradiated in the HANARO for about 100 days (E > 1.0 MeV, 1.1 10 21 n/cm 2 ). These tests and results indicate that the mechanical properties of zirconium alloys are similar whether unirradiated or irradiated. Alloy B has shown the highest yield strength and tensile strength properties compared to other alloys in irradiated condition. Even though each of the zirconium alloys has a different alloying content, this content does not seem to affect the mechanical properties under an unirradiated condition and low fluence. And all the alloys have shown the tendency to increase in yield strength and ultimate tensile strength. Transverse specimens of each of the zirconium alloys have a slightly lower irradiation growth tendency than longitudinal specimens. However, for clear analysis of texture effects, further testing under higher irradiation conditions is needed

Characterization of Irradiated and Non-Irradiated Rubber from Automotive Scrap Tires

Science.gov (United States)

Souza, Clécia Moura; Silva, Leonardo G.

The aim of this work was to characterize the samples of irradiated and non-irradiated rubber from automotive scrap tires. Rubber samples from scrap tires were irradiated at irradiation doses of 200, 400 and 600kGy in an electron beam accelerator. Subsequently, both the irradiated and non-irradiated samples were characterized by thermogravimetry (TG), differential scanning calorimetry (DSC), tensile strength mechanical test, and Fourier transform infrared (FTIR) spectrophotometry.

Consumer opinions in Argentina on food irradiation: irradiated onions

International Nuclear Information System (INIS)

Curzio, O.A.; Croci, C.A.

1998-01-01

Two surveys were carried out in Buenos Aires of consumer attitudes towards irradiated onions [no data given]. The first investigated the general level of consumer knowledge concerning food irradiation, whilst the second (which covered consumers who had actually bought irradiated onions) examined reasons for purchase and consumer satisfaction. Results reveal that more than 90% of consumers surveyed had a very limited knowledge of food irradiation

Critical and sub-critical experiments on U-BeO lattices; Experiences critiques et sous-critiques sur reseaux U-BeO

Energy Technology Data Exchange (ETDEWEB)

Benoist, P.; Gourdon, Ch.; Martelly, J.; Sagot, M.; Wanner, G. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Deniz, V.; Joshi, B.V.; Sahai, K. [Atomic Energy Establishment Trombay (India)

1958-07-01

Sub-critical experiments have allowed us to measure the material buckling of uranium natural oxide of beryllium lattices with a grid of 15 cm, and made up of uranium bars measuring 2.60 - 2.92 - 3.56 and 4.40 cm of diameter. A critical experiment has then been conducted with hollow 1.35 per cent enriched uranium bars. A study of U-BeO 18.03 cm grid lattices is at present being conducted. (author)Fren. [French] Nous avons mesure par des experiences sous-critiques le laplacien matiere de reseaux uranium naturel-oxyde de beryllium, dont la maille carree a un pas de 15 cm, realises avec des barreaux d'uranium de diametres 2,60 - 2,92 - 3,56 - 4,40 cm. Une experience critique a ete faite ensuite avec des barres creuses d'uranium enrichi a 1,35 pour cent; l'etude des reseaux U-BeO de pas 18,03 cm est actuellement en cours. (auteur)

Critical and sub-critical experiments on U-BeO lattices; Experiences critiques et sous-critiques sur reseaux U-BeO

Energy Technology Data Exchange (ETDEWEB)

Benoist, P; Gourdon, Ch; Martelly, J; Sagot, M; Wanner, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Deniz, V; Joshi, B V; Sahai, K [Atomic Energy Establishment Trombay (India)

1958-07-01

Sub-critical experiments have allowed us to measure the material buckling of uranium natural oxide of beryllium lattices with a grid of 15 cm, and made up of uranium bars measuring 2.60 - 2.92 - 3.56 and 4.40 cm of diameter. A critical experiment has then been conducted with hollow 1.35 per cent enriched uranium bars. A study of U-BeO 18.03 cm grid lattices is at present being conducted. (author)Fren. [French] Nous avons mesure par des experiences sous-critiques le laplacien matiere de reseaux uranium naturel-oxyde de beryllium, dont la maille carree a un pas de 15 cm, realises avec des barreaux d'uranium de diametres 2,60 - 2,92 - 3,56 - 4,40 cm. Une experience critique a ete faite ensuite avec des barres creuses d'uranium enrichi a 1,35 pour cent; l'etude des reseaux U-BeO de pas 18,03 cm est actuellement en cours. (auteur)

Effect of Grapefruit Seed Extract on Thermal Inactivation of Listeria monocytogenes during Sous-Vide Processing of Two Marinated Mexican Meat Entrées.

Science.gov (United States)

Valenzuela-Melendres, Martin; Peña-Ramos, E Aida; Juneja, Vijay K; Camou, Juan Pedro; Cumplido-Barbeitia, German

2016-07-01

D- and z-values for Listeria monocytogenes were obtained for two Mexican meat entrées: pork meat marinated in tomatillo (green tomato) sauce (PTS) and beef marinated in a red chili sauce (BRCS), with addition of 0, 200, and 800 ppm of grapefruit seed extract (GSE). Meat samples inoculated with L. monocytogenes were packaged in sterile bags, immersed in a water bath, and held at 55, 57.5, 60, and 62.5°C for different periods of time. Depending upon the temperature, D-values at 0 ppm of GSE ranged from 26.19 to 2.03 min in BRCS and 26.41 to 0.8 min in PTS. Adding 800 ppm of GSE to BRCS thermally treated at 55 and 62.5°C significantly decreased inactivation time by 35%. A reduction in time of 25.9, 10.6, and 40.1% at 55, 57.5, and 60°C, respectively, was observed in PTS with 800 ppm of GSE. The z-values of L. monocytogenes were not significantly affected by GSE addition; average z-values were 7.25 and 5.09°C for BRCS and PTS, respectively. Estimated thermal lethality for a 7-D log reduction of L. monocytogenes under commercial-size sous-vide conditions at a reference temperature of 55°C was reached at 78 and 71 min for BRCS without and with 800 ppm of GSE, respectively. For PTS, 7-D reduction was attained at 69 and 61 min without and with addition of 800 ppm of GSE, respectively. Supplementing both Mexican meat entrées (BRCS and PTS) with 800 ppm of GSE rendered L. monocytogenes cells more sensitive to the lethal effect of heat. The results of this study will assist the retail food industry in designing acceptance limits on critical control points pertaining to cooking regimes to effectively eliminate L. monocytogenes in BRCS and PTS sous-vide processed Mexican meat entrées.

Device for recovering radioactive waste; Dispositif de recuperation d'effluents radioactifs

Energy Technology Data Exchange (ETDEWEB)

Mas, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

The previous system which consisted in the use of metallic reservoirs placed in a concrete-lined pit gave rise to certain incidents due to corrosion or overflowing followed by contamination with serious consequences. The new system presented consists essentially of a standard 3 m{sup 3} reservoir of stainless steel which is fixed in a concrete-lined well, is tubed with stainless steel. Each reservoir has a standard lid on which are placed all the accessory devices, themselves standardized. The new reservoirs offer thus a great degree of security, and are interchangeable; the wells are easy to decontaminate and it is possible to work in a well without any danger of the personnel being irradiated by neighbouring reservoirs. (author) [French] L'ancien systeme de cuves metalliques disposees dans une fosse betonnee a donne lieu a des incidents par corrosion ou debordements suivis de contamination ayant de grosses consequences. Le nouveau systeme presente comporte essentiellement une cuve standard de 7 m{sup 3} en acier inoxydable mise en place et ancree dans un puits betonne et cuvele en acier inoxydable. Chaque cuve comporte un couvercle standard sur lequel sont rassembles tous les dispositifs annexes standardises eux aussi. Les nouvelles cuves sont donc sures, interchangeables, les puits sont faciles a decontaminer et le travail dans un puits est possible sans crainte d'irradiation du personnel par les cuves voisines. (auteur)

Facts about food irradiation: Chemical changes in irradiated foods

International Nuclear Information System (INIS)

1991-01-01

This fact sheet addresses the safety of irradiated food. The irradiation process produces very little chemical change in food, and laboratory experiments have shown no harmful effects in animals fed with irradiated milk powder. 3 refs

Radiation Effect on Secondary Cancerization by Tumour Cell Grafts. Take of Irradiated Tumour Cells in Irradiated and Non-Irradiated Animals

Energy Technology Data Exchange (ETDEWEB)

Costachel, O.; Sandru, Gh.; Kitzulescu, I. [Oncological Institute, Bucharest (Romania)

1969-11-15

This study was designed to determine the ability of haemocytoblastoma, SME and Jensen tumours, which had been irradiated in vitro, to take in C{sub 57}BL/6 mice or Wistar rats that were whole-body irradiated at 0.4 kR and 0.6 kR respectively. It was found-that the take of tumour cell grafts irradiated in vitro increased in whole-body irradiated mice and rats but not in non-irradiated ones. When Wistar rats, that had been whole-body irradiated with 0.7 and 0.8 kR 1 - 7 months earlier and survived after treatment, were grafted with Jensen tumour cells irradiated in vitro with 3 kR they were found to develop tumours and lung metastases (in contrast to non-irradiated rats). A cross resistance against non-irradiated Jensen tumour cells was obtained in non- irradiated Wistar rats by grafting irradiated Jensen tumour cells. Chromosomal analysis showed two supplementary giant markers in the Jensen tumour cells that had been irradiated in vitro before grafting. (author)

Food irradiation

International Nuclear Information System (INIS)

Beyers, M.

1977-01-01

The objectives of food irradiation are outlined. The interaction of irradiation with matter is then discussed with special reference to the major constituents of foods. The application of chemical analysis in the evaluation of the wholesomeness of irradiated foods is summarized [af

Apport de la simulation numérique à la compréhension des mécanismes d'interaction de cavités dans le cadre de la modélisation de l'endommagement ductile sous sollicitation dynamique

Science.gov (United States)

Roy, G.; Buy, F.; Llorca, F.

2002-12-01

L'étude présentée s'inscrit dans le cadre d'une démarche menant à la construction d'un modèle analytique ou semi analytique de comportement élasto-visco-plastique endommageable, applicable aux chargements rencontrés en configuration d'impact violent et générant de l'écaillage ductile. La prise en compte des effets de compressibilité et de micro inertie est essentielle pour modéliser la phase de croissance. Des simulations numériques globales de la structure et locales à l'échelle des hétérogénéités permettent d'évaluer les niveaux de sollicitations dans les zones susceptibles de s'endommager, dévaluer des critères analytiques de germination de l'endommagement et de comprendre les mécanismes d'interaction entre les défauts. Les effets micro inertiels et de compressibilité sont ainsi mis en évidence dans les phases de germination et de coalescence des micro défauts. II s'agit ici d'une illustration non exhaustive de travaux engagés au CEA Valduc sur le tantale, dans le cadre d'une thèse [10]. Un programme matériaux en partenariat CEA-CNRS sur la modélisation multi échelles du comportement de structures a également été initié dans ce contexte.

Food irradiation

International Nuclear Information System (INIS)

Macklin, M.

1987-01-01

The Queensland Government has given its support the establishment of a food irradiation plant in Queensland. The decision to press ahead with a food irradiation plant is astonishing given that there are two independent inquiries being carried out into food irradiation - a Parliamentary Committee inquiry and an inquiry by the Australian Consumers Association, both of which have still to table their Reports. It is fair to assume from the Queensland Government's response to date, therefore, that the Government will proceed with its food irradiation proposals regardless of the outcomes of the various federal inquiries. The reasons for the Australian Democrats' opposition to food irradiation which are also those of concerned citizens are outlined

Rapid differentiation between gamma-irradiated and non irradiated potato tubers

International Nuclear Information System (INIS)

Jona, R.; Fronda, A.

1990-01-01

The use of gamma irradiation as commercial method for the preservation of fruits and vegetables calls for methods of differentiation between irradiated and non-irradiated foodstuffs. In a previous research, the polysaccharidic content of cell walls of irradiated tissue has been investigated, but it required rather long time to reach the result. A method devised to ascertain the vitality of cells has been applied to distinguish irradiated from non-irradiated potato tubers. 500 mg of tissue excised from tubers have been infiltrated with tetrazolium chloride 0.6% in phosphate buffer, pH 7.4. After 15 hrs of incubation at 30 0 C the treated tissues have been extracted with 95% ethanol whose O.D. has been measured at 530 mμ wavelength. The colour intensity of the alcohol allowed a very clearcut recognition of the irradiated tubers. (author)

Gamma irradiator

International Nuclear Information System (INIS)

Simonet, G.

1986-09-01

Fiability of devices set around reactors depends on material resistance under irradiation noticeably joints, insulators, which belongs to composition of technical, safety or physical incasurement devices. The irradiated fuel elements, during their desactivation in a pool, are an interesting gamma irradiation device to simulate damages created in a nuclear environment. The existing facility at Osiris allows to generate an homogeneous rate dose in an important volume. The control of the element distances to irradiation box allows to control this dose rate [fr

Foodstuff irradiation

International Nuclear Information System (INIS)

1982-01-01

Report written on behalf of the Danish Food Institute summarizes national and international rules and developments within food irradiation technology, chemical changes in irradiated foodstuffs, microbiological and health-related aspects of irradiation and finally technological prospects of this conservation form. Food irradiatin has not been hitherto applied in Denmark. Radiation sources and secondary radiation doses in processed food are characterized. Chemical changes due to irradiation are compared to those due to p.ex. food heating. Toxicological and microbiological tests and their results give no unequivocal answer to the problem whether a foodstuff has been irradiated. The most likely application fields in Denmark are for low radiation dosis inhibition of germination, riping delay and insecticide. Medium dosis (1-10 kGy) can reduce bacteria number while high dosis (10-50 kGy) will enable total elimination of microorganisms and viruses. Food irradiation can be acceptable as technological possibility with reservation, that further studies follow. (EG)

Estimation of irradiation temperature within the irradiation program Rheinsberg

CERN Document Server

Stephan, I; Prokert, F; Scholz, A

2003-01-01

The temperature monitoring within the irradiation programme Rheinsberg II was performed by diamond powder monitors. The method bases on the effect of temperature on the irradiation-induced increase of the diamond lattice constant. The method is described by a Russian code. In order to determine the irradiation temperature, the lattice constant is measured by means of a X-ray diffractometer after irradiation and subsequent isochronic annealing. The kink of the linearized temperature-lattice constant curves provides a value for the irradiation temperature. It has to be corrected according to the local neutron flux. The results of the lattice constant measurements show strong scatter. Furthermore there is a systematic error. The results of temperature monitoring by diamond powder are not satisfying. The most probable value lays within 255 C and 265 C and is near the value estimated from the thermal condition of the irradiation experiments.

Austin: austenitic steel irradiation E 145-02 Irradiation Report

International Nuclear Information System (INIS)

Genet, F.; Konrad, J.

1987-01-01

Safety measures for nuclear reactors require that the energy which might be liberated in a reactor core during an accident should be contained within the reactor pressure vessel, even after very long irradiation periods. Hence the need to know the mechanical properties at high deformation velocity of structure materials that have received irradiation damage due to their utilization. The stainless steels used in the structures of reactors undergo damage by both thermal and fast neutrons, causing important changes in the mechanical properties of these materials. Various austenitic steels available as structural materials were irradiated or are under irradiation in various reactors in order to study the evolution of the mechanical properties at high deformation velocity as a function of the irradiation damage rate. The experiment called AUSTIN (AUstenitic STeel IrradiatioN) 02 was performed by the JRC Petten Establishment on behalf of Ispra in support of the reactor safety programme

Comportement en vapocraquage de molécules modèles et de distillats sous vide hydrotraités. Première partie : potentialité de craquage, réacteur à profil de température rectangulaire et à court temps de séjour Steam-Cracking Behavior of Model Molecules and Hydrotreated Vacuum Distillates

Directory of Open Access Journals (Sweden)

Berthelin M.

2006-11-01

Full Text Available Dans le cadre de la valorisation des coupes lourdes par vapocraquage, des distillats sous vide plus ou moins hydrotraités et des molécules modèles ont été pyrolysés. Cette étude a été réalisée sur un micropilote dont la partie réactionnelle est chauffée entre 680 et 860°C, par induction électromagnétique haute fréquence; le débit total peut varier de 60 à 800 g/h avec une perte de charge inférieure à 0,3 bar. Deux réacteurs tubulaires spiralés de rapport surface/volume allant jusqu'à 2000 m-1 permettent d'atteindre des temps de séjour de 10 à 400 millisecondes. Un indice quantifiant l'aptitude de chaque molécule à produire de l'éthylène, du propylène et des composés lourds, a permis l'établissement d'une échelle de potentialité de craquage, permettant d'orienter les performances d'un catalyseur de prétraitement : optimisation de la consommation d'hydrogène, meilleure valorisation des charges lourdes lors du vapocraquage. Grâce au profil de température rectangulaire du micropilote, des gains très importants de rendements d'éthylène et une production très faible d'asphaltènes ont été mis en évidence par pyrolyse de distillats sous vide hydrotraités. L'importance primordiale de la température dans le couple température-temps de séjour a été confirmée. Within the framework of the upgrading of heavy cuts for steam cracking, more or less hydrotreated vacuum distillates and model molecules were pyrolyzed. This research was done in a micropilot plant in which the reaction section was heated to between 680 and 860°C by high-frequency electromagnetic induction. The total flow rate can vary from 60 to 800 g/h with a pressure drop of less than 0. 3 bar. Two spiral tubular reactors with a high surface/volume ratio of up to 2000 m-1 enable residence times of 10 to 400 milliseconds to be obtained. An index quantifying the capacity of each molecule to produce ethylene, propylene and heavy compounds was used

Research experiments on striction; Etudes experimentales sur le phenomene de striction

Energy Technology Data Exchange (ETDEWEB)

Aymar, R; Etievant, C; Hubert, P; Samain, A; Taquet, B; Torossian, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

Research work presented herewith concerns the behaviour of high intensity discharges in low pressure gases and examines the means of using the associated electromagnetic forces to heat the ionized gas and to avoid at the same time the cooling of the gas through contact with the walls of the chamber. We tried to stabilize the discharges by means of the combined action of a longitudinal magnetic field and of eddy currents induced in a conducting sheath. Devices for straight line and toroidal discharges have been tested. Research has been conducted with the aid of measurements of electric magnitudes, of penetrating radiations (x-rays, neutrons), and optical properties. The deformations of the luminous column have been followed by ultra rapid cinematography, whereas the evolution of the optical spectrum with time provided a monitor of the physical state of the plasma at any time. (author)Fren. [French] Les travaux presentes au cours de cette communication ont pour but d'etudier le comportement des decharges a forte intensite dans les gaz sous basse pression et de rechercher le moyen d'utiliser les forces electromagnetiques dont elles sont le siege pour chauffer un gaz ionise tout en lui evitant de se refroidir au contact de parois materielles. La stabilisation des decharges a ete recherchee par l'action conjuguee d'un champ magnetique longitudinal et des courants de Foucault induits dans une enveloppe conductrice. Des dispositifs de decharges rectilignes et toroidales ont ete essayes. Les moyens d'investigation ont comporte des mesures de grandeurs electriques, des mesures de rayonnements penetrants (rayons X-neutrons) et des mesures optiques. Les deformations de la colonne lumineuses ont ete suivies par cinematographie ultra-rapide tandis que l'evolution du spectre optique au cours du temps a permis de controler, a chaque instant, l'etat physique du plasma. (auteur)

Prédiction du comportement à long terme des matériaux polymères

Science.gov (United States)

Lemaire, J.

1998-06-01

Most of the world activity on research, development and control of polymer durability is still based on empirical techniques developed in the early ages of polymer uses. Those techniques should be critically analysed considering the state of the art in the fundamental understanding of these complex phenomena. A more rational approach is described, especially to predict the lifetime of polymeric materials in environmental conditions. That approach is based on the recognition of the chemical evolution mechanisms. Les activités de recherche, développement et contrôle de durabilité des matériaux polymères sont encore, pour une part très importante, basées sur l'emploi de techniques empiriques dont les principes ont été énoncés dès le début de l'exploitation de ces matériaux. Une analyse critique de ces méthodes s'impose aujourd'hui en tenant compte de l'avancement des connaissances. Une approche plus rationnelle est décrite, approche basée sur la reconnaissance des mécanismes d'évolution chimique. A titre d'exemple, le mécanisme d'évolution du PVC sous contraintes conjuguées de l'UV, de la chaleur et de l'oxygène, est décrit. Des études récentes de photooxydation de polymères conducteurs au sein de polyéthylène sont également succinctement rapportées.

Irradiation of goods

International Nuclear Information System (INIS)

Huebner, G.

1992-01-01

The necessary dose and the dosage limits to be observed depend on the kind of product and the purpose of irradiation. Product density and density distribution, product dimensions, but also packaging, transport and storage conditions are specific parameters influencing the conditions of irradiation. The kind of irradiation plant - electron accelerator or gamma plant - , its capacity, transport system and geometric arrangement of the radiation field are factors influencing the irradiation conditions as well. This is exemplified by the irradiation of 3 different products, onions, deep-frozen chicken and high-protein feed. Feasibilities and limits of the irradiation technology are demonstrated. (orig.) [de

New results concerning the behaviour of fission gases in in-pile UO{sub 2} at high temperatures; Resultats nouveaux sur le comportement des gaz de fission a haute temperature dans l'UO{sub 2} en pile

Energy Technology Data Exchange (ETDEWEB)

Soulhier, R; Schurenkamper, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

The authors consider in the first part the various phenomena giving rise to the production of fission gases towards the exterior of nuclear fuels. The following aspects are dealt with: diffusion, for which is considered the influence of the predecessors of the radioactive gases, the fission recoil, atom expulsion along the fission paths and the evaporation. In the second part the authors present the results obtained on UO{sub 2} samples subjected to irradiation at temperatures of between 150 and 2000 deg C: - At low temperatures the variation of the amount produced as a function of the half-life of the isotopes studied shows that recoil is hot the only cause of gas production. - Above 1800 deg C, a weight loss by evaporation has been observed and the influence of this phenomenon on gas liberation has been studied; thus the fraction of {sup 135}Xe liberated at 2000 deg C by processes other than evaporation is of the order of 10 per cent. - The influence of the various mechanism on the overall effect as a function of temperature is discussed. (authors) [French] Dans une premiere partie, les auteurs etudient les differents phenomenes pouvant donner lieu au degagement des gaz de fission hors d'un combustible. Sont traites successivement: la diffusion, pour laquelle on discute l'influence des predecesseurs des gaz radioactifs, le recul de fission, l'expulsion des atomes le long des trajets de fission et l'evaporation. Dans une deuxieme partie ils exposent les resultats obtenus sur des echantillons d'UO{sub 2} portes sous irradiation a des temperatures comprises entre 150 deg C et 2000 deg C: - A basse temperature la variation de la quantite degagee suivant la periode des isotopes etudies montre que le recul n'est pas la seule cause du degagement des gaz. - Au-dessus de 1800 deg C on a note une perte de poids par evaporation et on a evalue l'influence de ce phenomene sur la liberation des gaz: ainsi la fraction du {sup 135}Xe liberee a 2000 deg C par d'autres processus

Comparison of deuterium retention for ion-irradiated and neutron-irradiated tungsten

International Nuclear Information System (INIS)

Oya, Yasuhisa; Kobayashi, Makoto; Okuno, Kenji; Shimada, Masashi; Calderoni, Pattrick; Oda, Takuji; Hara, Masanori; Hatano, Yuji; Watanabe, Hideo

2014-01-01

The behavior of D retentions for Fe 2+ irradiated tungsten with the damage of 0.025-3 dpa was compared with that for neutron irradiated tungsten with 0.025 dpa. The D 2 TDS spectra for Fe 2+ irradiated tungsten consisted of two desorption stages at 450 K and 550 K although that for neutron irradiated tungsten was composed of three stages and addition desorption stage was found around 750 K. The desorption rate of major desorption stage at 550 K increased as the number of dpa by Fe 2+ irradiation increased. In addition, the first desorption stage at 450 K was only found for the damaged samples, indicating that the second stage would be based on intrinsic defects or vacancy produced by Fe 2+ irradiation and the first stage should be the accumulation of D in mono vacancy leading to the lower activation energy, where the dislocation loop and vacancy was produced. The third one was only found for the neutron irradiation, showing the D trapping by void or vacancy cluster and the diffusion effect is also contributed due to high FWHM of TDS spectrum. It can be said that the D 2 TDS spectra for Fe 2+ -irradiated tungsten could not represent that for neutron-irradiated one, showing that the deuterium trapping and desorption mechanism for neutron-irradiated tungsten has a difference from that for ion-irradiated one. (author)

Response of irradiated diet fed rats to whole body X irradiation

International Nuclear Information System (INIS)

Hasan, S.S.; Kushwaha, A.K.S.

1985-01-01

The response to whole body X irradiation has been studied in the brain of rats fed both on a normal diet (consisting of equal parts of wheat and gram flour) and on a low protein irradiated diet (consisting of a part of normal diet and three parts of wheat). The activity of enzymes related to the glucose metabolism (glucose 6-phosphate dehydrogenase and fructose diphosphate aldolase) is reduced, while that of peroxidant enzymes (catalase and lipid peroxidase) increased in the brain of rats that received a diet poor in proteins and irradiated diets (normal or hypoproteic). DNA and RNA levels and protein content show a significant reduction in the brain of rats with hypoproteic and irradiated diets. The total body irradiation causes serious alterations in the brain in animals with a hypoproteic malnutritions due both to a low protein and an irradiated diet. The brain of rats fed on a low protein and irradiated diet exhibits after whole body irradiation damages more severe than those in rats fed on a normal irradiated diet

ETUDE EXPERIMENTALE DE L’INFLUENCE DE LA RIGIDITE STATIQUE DES TOURS SUR LE COMPORTEMENT A L’USURE DES PLAQUETTES EN CARBURE METALLIQUE «NUANCE P25 »

Directory of Open Access Journals (Sweden)

L BOULANOUAR

2002-12-01

Full Text Available Ce travail consiste à étudier expérimentalement l’influence de quelques machines-outils sur le comportement à l’usure des plaquettes en carbure métalliques. Les essais ont été réalisés dans des conditions opératoires proches de celles industrielles. Les machines-outils utilisées sont caractérisées par leurs rigidités. Le suivi de l’évolution de l’usure des plaquettes en fonction du temps (τ et des éléments du régime de coupe (v, f et d sur chaque machine a été établi conformément à la méthode de planification des expériences. Les résultats obtenus ont été traités, analysés et interprétés physiquement.

Comportement des poteaux composites en profils creux en acier remplis de béton Behavior of composite columns in hollow steel section filled with concrete

Directory of Open Access Journals (Sweden)

Othmani N.

2012-09-01

Full Text Available Le but de cet article, est la determination des rigidites flexionnelles EIx et EIy d’fune section mixte acier beton et plus precisement d’fun poteau en tube d’facier de section rectangulaire, remplie de beton, sollicitee a la flexion bi-axiale (N, Mx et My. L’festimation des rigidites sera faite a partir d’fune approche theorique par une analyse du poteau en elements finis (element barre a 4 degres de liberte, basee sur les conditions d’fequilibres a mi-portee en utilisant la relation moment-courbure (M–Φ de l’felement deforme par application de l’fequation suivante: EI=M/Φ. Le comportement des materiaux est celui comme adopte par les reglements Eurocode 2 et 3, respectivement pour le beton et l’facier. Afin de valider l’fapproche theorique utilisee dans cette etude, deux comparaisons ont ete faites : une premiere permettant de comparer les resultats des rigidites determinees par les relations moments courbures et celles calculees par l’fEurocode 4 et une deuxieme comparaison entre les charges de ruines de deux poteaux de grandeurs natures avec ceux testes au laboratoire [2]. Au vu des resultats obtenus, nous pouvons conclure que l’approche théorique utilisée dans cette étude ainsi que les modèles de comportement des matériaux sont adéquats pour ce genre de problèmes. The purpose of this paper is the determination of flexural stiffness EIx and EIy of a concrete filled rectangular cross section of a composite steel column, under biaxial bending (N, Mx and My. The rigidities will be estimated from a theoretical approach using a finite element analysis (element bar with 4 degrees of freedom, based on the equilibrium conditions at mid-span using the moment-curvature relationships (M–Φ of the deformed element by applying the following equation: EI=M/Φ. The material behavior is the one adopted by Eurocode 2 and 3, respectively, for concrete and steel. To validate the theoretical approach used, two comparisons

Microfracture pattern compared to core-scale fractures in the borehole of Soultz-sous-Forets granite, Rhine graben, France

Energy Technology Data Exchange (ETDEWEB)

Dezayes, C.; Villemin, T. [Universite de Savoie (France). Laboratoire de Geodynamique des Chaines Alpines, UPRES-A CNRS 5025; Pecher, A. [Universite Joseph Fourier, Grenoble (France). Laboratoire de Geodynamique des Chaines Alpines, UPRES-A CNRS 5025

2000-07-01

Microfractures appearing in thin section as fluid inclusion trails in quartz crystals were studied in four core samples of Soultz-sous-Forets granite. Their orientations in four series of three mutually perpendicular thin sections were estimated using a previously described apparent dip method and a new method involving measurements of strike and apparent dips. Three samples display three microfracture sets and one sample displays two sets. In all samples, one set is nearly vertical and strikes N-S. In two samples, one and two sets are nearly vertical and strike E-W. In two samples, two sets strike NW-SE: one is vertical, the other dips gently to the NE (or SW). Comparing microfracture and mesofractures sets in the same cores shows that (1) the N-S microfacture set is always dominant at both scales and (2) all other microfracture sets have no mesoscopic counterpart. The N-S microfracture sets could have been created during E-W extension of earliest Cenozoic age (Rhine Graben rifting). Differences between the two scales are explained by a {sigma}{sub 1}/{sigma}{sub 2} switching which occurred at the crystal scale and generated mutually perpendicular cracks.

L'interdépendance entre les sous-systèmes conjugal et parental: une analyse personne-processus-contexte

Directory of Open Access Journals (Sweden)

Bigras Marc

2000-01-01

Full Text Available Dans le présent article nous étudions les mécanismes de transmission des difficultés socioaffectives entre les systèmes conjugal et parental sous l'effet d'une part de stress contextuels comme la pauvreté des familles et, d'autre part, des caractéristiques personnelles des membres de ces familles comme le sexe et l'âge de l'enfant. Un échantillon de couples avec ou sans enfant permet dans une première étude d'estimer l'impact de la présence de l'enfant sur le couple alors que deux autres études posent la question complémentaire de l'impact du couple sur l'enfant. Les résultats de ces études contribuent à démontrer l'interdépendance entre le couple et l'enfant alors que chaque membre de la famille peut-être une source d'influence sur les autres. Nous argumentons qu'une réponse aversive à des problèmes extrafamiliaux favorise des stress intrafamiliaux mais que cela se révèle surtout selon les caractéristiques des membres de la famille.

Identification of irradiated foods prospects for post-irradiation estimate of irradiation dose in irradiated dry egg products

International Nuclear Information System (INIS)

Katusin-Raxem, B.; Mihaljievic, B.; Razem, D.

2002-01-01

Radiation-induced chemical changes in foods are generally very small at the usual processing doses. Some exception is radiation degradation of lipids, which are the components most susceptible to oxidation. A possible use of lipid hydroperoxides (LOOH) as indicators of irradiation is described for whole egg and egg yolk powders. A sensitive and reproducible spectrophotometric method for LOOH measurement based on feric thiocyanate, as modified in our laboratory, was applied. This method enabled the determination of LOOH, including oleic acid hydroperoxides, which is usually not possible with some other frequently used methods. The lowest limit of 0.05 mmol LOOH/kg lipid could be measured. The measurements were performed in various batches of whole egg and egg yolk powders by the same producer, as well as in samples supplied by various producers. Baseline level in unirradiated egg powder 0.110 ± 0.067 mmol LOOH /kgL was established. The formation of LOOH with dose, as well as the influence of age, irradiation conditions, storage time and storage conditions on LOOH were investigated. The irradiation of whole egg and egg yolk powders in the presence of air revealed an initially slow increase of LOOH, caused by an inherent antioxidative capacity, followed by a fast linear increase after the inhibition dose (D o ). In all investigated samples D o of 2 kGy was determined. Hydroperoxides produced in irradiated materials decay with time. In whole egg and egg yolk powders, after an initially fast decay, the level of LOOH continued to decrease by the first-order decay. Nevertheless, after a six months storage it was still possible to unambiguously identify samples which had been irradiated with 2 kGy in the presence of air. Reirradiation of these samples revealed a significant reduction of D o to 1 kGy. In samples irradiated with 4 kGy and kept under the same conditions, the shortening of D o to 0.5 kGy was determined by reirradiation. This offers a possibility for the

Caractérisation rhéologique et modélisation structurelle des systèmes argile-polymère. Application aux fluides de forage Rheometry and Structural Modelling of Clay-Polymer Systems. Application to Drilling Fluids

Directory of Open Access Journals (Sweden)

Cartalos U.

2006-12-01

Full Text Available Le comportement rhéologique des systèmes argile-polymère couramment utilisés dans les formulations des fluides de forage est examiné dans cet article. Un protocole d'essai adapté à leur nature thixotrope qui permet d'effectuer des mesures reproductibles est mis au point. Les propriétés intrinsèques du matériau sont ainsi déterminées sur toute la gamme de sollicitations : du comportement solide aux faibles déformations au comportement fluide aux taux de déformations intenses. Il est montré que ces systèmes sont caractérisés par des temps de restructuration longs, par des rhéogrammes en régime permanent présentant un minimum de contrainte et par des dépassements importants de la contrainte lors des essais transitoires. Ces effets peuvent être complètement masqués par des procédures d'essai préconisés par les normes en vigueur dans le forage. Une loi de comportement structurelle récente qui relie les propriétés thixotropes et viscoélastiques du matériau aux mécanismes de création et de rupture des flocs peut reproduire l'ensemble des phénomènes observés. Sa capacité de décrire le changement de structure au sein du fluide sous écoulement ou au repos et les variations associées de la contrainte permet d'envisager une meilleure modélisation de l'hydraulique du forage. The rheological behaviour of clay-polymer systems that are currently used in the formulation of drilling fluids was studied. A specific experimental procedure was used to account for thixotropic effects and obtain, thus, reproducible results. In this way it was possible to determine intrinsic properties in the whole range, from solid behaviour below the yield stress to liquid behaviour at very high shear. These systems are shown to be characterised by very long time scales of structure recovery, by the existence of a minimum shear stress in the steady state flow curve and by important stress overshoots in transient flows. These effects can be

Post-irradiation examination and R and D programs using irradiated fuels at KAERI

International Nuclear Information System (INIS)

Chun, Yong Bum; Min, Duck Kee; Kim, Eun Ka and others

2000-12-01

This report describes the Post-Irradiation Examination(PIE) and R and D programs using irradiated fuels at KAERI. The objectives of post-irradiation examination (PIE) for the PWR irradiated fuels, CANDU fuels, HANARO fuels and test fuel materials are to verify the irradiation performance and their integrity as well as to construct a fuel performance data base. The comprehensive utilization program of the KAERI's post-irradiation examination related nuclear facilities such as Post-Irradiation Examination Facility (PIEF), Irradiated Materials Examination Facility (IMEF) and HANARO is described

Post-irradiation examination and R and D programs using irradiated fuels at KAERI

International Nuclear Information System (INIS)

Chun, Yong Bum; So, Dong Sup; Lee, Byung Doo; Lee, Song Ho; Min, Duck Kee

2001-09-01

This report describes the Post-Irradiation Examination(PIE) and R and D programs using irradiated fuels at KAERI. The objectives of post-irradiation examination (PIE) for the PWR irradiated fuels, CANDU fuels, HANARO fuels and test fuel materials are to verify the irradiation performance and their integrity as well as to construct a fuel performance data base. The comprehensive utilization program of the KAERI's post-irradiation examination related nuclear facilities such as Post-Irradiation Examination Facility (PIEF), Irradiated Materials Examination Facility (IMEF) and HANARO is described

Irradiation creep under 60 MeV alpha irradiation

International Nuclear Information System (INIS)

Reiley, T.C.; Shannon, R.H.; Auble, R.L.

1980-01-01

Accelerator-produced charged-particle beams have advantages over neutron irradiation for studying radiation effects in materials, the primary advantage being the ability to control precisely the experimental conditions and improve the accuracy in measuring effects of the irradiation. An apparatus has recently been built at ORNL to exploit this advantage in studying irradiation creep. These experiments employ a beam of 60 MeV alpha particles from the Oak Ridge Isochronous Cyclotron (ORIC). The experimental approach and capabilities of the apparatus are described. The damage cross section, including events associated with inelastic scattering and nuclear reactions, is estimated. The amount of helium that is introduced during the experiments through inelastic processes and through backscattering is reported. Based on the damage rate, the damage processes and the helium-to-dpa ratio, the degree to which fast reactor and fusion reactor conditions may be simulated is discussed. Recent experimental results on the irradiation creep of type 316 stainless steel are presented, and are compared to light ion results obtained elsewhere. These results include the stress and temperature dependence of the formation rate under irradiation. The results are discussed in relation to various irradiation creep mechanisms and to damage microstructure as it evolves during these experiments. (orig.)

Studies and support for the EGS reservoirs at Soultz-sous-Forets. April 2004 - May 2009. Final report

Energy Technology Data Exchange (ETDEWEB)

Portier, S.; Vuataz, F.-D. [Centre de Recherche en Geothermie (CREGE), Neuchatel (Switzerland)

2009-08-15

This comprehensive final report for the Swiss Federal Office of Energy (SFOE) takes a look at the activities carried out during the period from April 2004 up to May 2009 at Soultz-sous-Forets, France, in connection with the enhanced geothermal systems (EGS) at that location. The report describes the work performed by the Swiss EGS Research and Development group involved in the Soultz project. The principal target set was to install and operate a power plant, enabling the deep reservoir/heat exchanger to be operated, evaluated and improved under realistic conditions. The Swiss contributors have been participating in several work packages: Short and long term tests and medium-term tests of the three-well reservoir/heat exchanger system, development and up-scaling, technical and economic design of larger, industrial, EGS units and the development of stimulation methodology for EGS. The exchange of findings obtained during this project phase is discussed, as is the state-of-the-art of EGS stimulation methods, the interpretation of logging data. Also, seismic /-hydraulic factors, the evaluation of the production/injection performance of the boreholes and reservoir development strategies are discussed as are the modelling of geochemical impact of forced fluid circulation in the deep geothermal reservoir and the results of chemical stimulation tests performed on site.

Food irradiation: An update

International Nuclear Information System (INIS)

Morrison, Rosanna M.

1984-01-01

Recent regulatory and commercial activity regarding food irradiation is highlighted. The effects of irradiation, used to kill insects and microorganisms which cause food spoilage, are discussed. Special attention is given to the current regulatory status of food irradiation in the USA; proposed FDA regulation regarding the use of irradiation; pending irradiation legislation in the US Congress; and industrial applications of irradiation

U-turn type continuous irradiation method and device for radiation-irradiated capsule

International Nuclear Information System (INIS)

Kikuchi, Takayuki.

1997-01-01

A capsule to be irradiated is moved while being rotated in one of conveying shafts disposed in a reactor to conduct irradiation treatment. Then, the irradiated capsule is made U-turn in the reactor, inserted to the other conveying shaft and moved while being rotated to conduct irradiation treatment again, and then transported out of the reactor. The device comprises a rotational conveying shaft for moving the irradiated capsule while rotating it, a conveying gear for U-turning the irradiated capsule in the reactor and inserting it to the conveying shaft and a driving mechanism for synchronously rotating the conveying gear relative to the conveying shaft at a constant ratio. Mechanical time loss and manual operation time loss can be reduced upon loading and taking up of the irradiated capsule. Then, the amount of irradiation treatment per unit time is increased, and an optional neutron irradiation amount can be obtained thereby enabling to reduce operator's radiation exposure. (N.H.)

Modelling property changes in graphite irradiated at changing irradiation temperature

CSIR Research Space (South Africa)

Kok, S

2011-01-01

Full Text Available A new method is proposed to predict the irradiation induced property changes in nuclear; graphite, including the effect of a change in irradiation temperature. The currently used method; to account for changes in irradiation temperature, the scaled...

Irradiation of foodstuffs

International Nuclear Information System (INIS)

Sjoeberg, A.M.

1993-01-01

Foodstuffs are irradiated to make them keep better. The ionizing radiation is not so strong as to cause radioactivity in the foodstuffs. At least so far, irradiation has not gained acceptance among consumers, although it has been shown to be a completely safe method of preservation. Irradiation causes only slight chemical changes in food. What irradiation does, however, is to damage living organisms, such as bacteria, DNA and proteins, thereby making the food keep longer. Irradiation can be detected from the food afterwards; thus it can be controlled effectively. (orig.)

Tissue irradiator

International Nuclear Information System (INIS)

Hungate, F.P.; Riemath, W.F.; Bunnell, L.R.

1975-01-01

A tissue irradiator is provided for the in-vivo irradiation of body tissue. The irradiator comprises a radiation source material contained and completely encapsulated within vitreous carbon. An embodiment for use as an in-vivo blood irradiator comprises a cylindrical body having an axial bore therethrough. A radioisotope is contained within a first portion of vitreous carbon cylindrically surrounding the axial bore, and a containment portion of vitreous carbon surrounds the radioisotope containing portion, the two portions of vitreous carbon being integrally formed as a single unit. Connecting means are provided at each end of the cylindrical body to permit connections to blood-carrying vessels and to provide for passage of blood through the bore. In a preferred embodiment, the radioisotope is thulium-170 which is present in the irradiator in the form of thulium oxide. A method of producing the preferred blood irradiator is also provided, whereby nonradioactive thulium-169 is dispersed within a polyfurfuryl alcohol resin which is carbonized and fired to form the integral vitreous carbon body and the device is activated by neutron bombardment of the thulium-169 to produce the beta-emitting thulium-170

Food irradiation

International Nuclear Information System (INIS)

Migdal, W.

1995-01-01

A worldwide standard on food irradiation was adopted in 1983 by codex Alimentarius Commission of the Joint Food Standard Programme of the Food and Agriculture Organization (FAO) of the United Nations and The World Health Organization (WHO). As a result, 41 countries have approved the use of irradiation for treating one or more food items and the number is increasing. Generally, irradiation is used to: food loses, food spoilage, disinfestation, safety and hygiene. The number of countries which use irradiation for processing food for commercial purposes has been increasing steadily from 19 in 1987 to 33 today. In the frames of the national programme on the application of irradiation for food preservation and hygienization an experimental plant for electron beam processing has been established in Inst. of Nuclear Chemistry and Technology. The plant is equipped with a small research accelerator Pilot (19 MeV, 1 kW) and industrial unit Electronika (10 MeV, 10 kW). On the basis of the research there were performed at different scientific institutions in Poland, health authorities have issued permissions for irradiation for; spices, garlic, onions, mushrooms, potatoes, dry mushrooms and vegetables. (author)

Food irradiation

International Nuclear Information System (INIS)

1991-01-01

Processing of food with low levels of radiation has the potential to contribute to reducing both spoilage of food during storage - a particular problem in developing countries - and the high incidence of food-borne disease currently seen in all countries. Approval has been granted for the treatment of more than 30 products with radiation in over 30 countries but, in general, governments have been slow to authorize the use of this new technique. One reason for this slowness is a lack of understanding of what food irradiation entails. This book aims to increase understanding by providing information on the process of food irradiation in simple, non-technical language. It describes the effects that irradiation has on food, and the plant and equipment that are necessary to carry it out safely. The legislation and control mechanisms required to ensure the safety of food irradiation facilities are also discussed. Education is seen as the key to gaining the confidence of the consumers in the safety of irradiated food, and to promoting understanding of the benefits that irradiation can provide. (orig.) With 4 figs., 1 tab [de

Irradiation damage

International Nuclear Information System (INIS)

Howe, L.M.

2000-01-01

There is considerable interest in irradiation effects in intermetallic compounds from both the applied and fundamental aspects. Initially, this interest was associated mainly with nuclear reactor programs but it now extends to the fields of ion-beam modification of metals, behaviour of amorphous materials, ion-beam processing of electronic materials, and ion-beam simulations of various kinds. The field of irradiation damage in intermetallic compounds is rapidly expanding, and no attempt will be made in this chapter to cover all of the various aspects. Instead, attention will be focused on some specific areas and, hopefully, through these, some insight will be given into the physical processes involved, the present state of our knowledge, and the challenge of obtaining more comprehensive understanding in the future. The specific areas that will be covered are: point defects in intermetallic compounds; irradiation-enhanced ordering and irradiation-induced disordering of ordered alloys; irradiation-induced amorphization

Irradiation damage

Energy Technology Data Exchange (ETDEWEB)

Howe, L.M

2000-07-01

There is considerable interest in irradiation effects in intermetallic compounds from both the applied and fundamental aspects. Initially, this interest was associated mainly with nuclear reactor programs but it now extends to the fields of ion-beam modification of metals, behaviour of amorphous materials, ion-beam processing of electronic materials, and ion-beam simulations of various kinds. The field of irradiation damage in intermetallic compounds is rapidly expanding, and no attempt will be made in this chapter to cover all of the various aspects. Instead, attention will be focused on some specific areas and, hopefully, through these, some insight will be given into the physical processes involved, the present state of our knowledge, and the challenge of obtaining more comprehensive understanding in the future. The specific areas that will be covered are: point defects in intermetallic compounds; irradiation-enhanced ordering and irradiation-induced disordering of ordered alloys; irradiation-induced amorphization.

Hemibody irradiation

International Nuclear Information System (INIS)

Schen, B.C.; Mella, O.; Dahl, O.

1992-01-01

In a large number of cancer patients, extensive skeletal metastases or myelomatosis induce vast suffering, such as intolerable pain and local complications of neoplastic bone destruction. Analgetic drugs frequently do not yield sufficient palliation. Irradiation of local fields often has to be repeated, because of tumour growth outside previously irradiated volumes. Wide field irradiation of the lower or upper half of the body causes significant relief of pain in most patients. Adequate pretreatment handling of patients, method of irradiation, and follow-up are of importance to reduce side effects, and are described as they are carried out at the Department of Oncology, Haukeland Hospital, Norway. 16 refs., 2 figs

Bakery products from irradiated and non-irradiated eggs - analytical problems associated with the detection of irradiation in processed foods

International Nuclear Information System (INIS)

Grabowski, H.U. von; Pfordt, J.

1993-01-01

In spring and early summer 1992, a number of irradiated egg products were illegally imported into Germay. To prove the irradiation of these egg products, mainly combined gas chromatography-mass spectrometry was applied. With this present study we wanted to answer the question if we were also able to detect the use of irradiated eggs in processed foods. The processed food we chose to produce and to investigate was a tart layer. For this product, dilution effects are of minor importance as no extra fat was added. Thus, the layers' fat almost exclusively came from the eggs. To study the influence of emulsifiers, we produced batters both with and without adding an emulsifer. The unsaturted hydrocarbons C14:1, C16:3, C16:2, C17:2, and C17:1 served as markers for an irradiation. In the non-irradiated egg samples and in the tart layers produced from them, these compounds could not be detected (or in some cases only in small amounts). They were, however, detectable in all irradiated samples. DCB could be found in all irradiated egg samples and in the tart layers that were baked from irradiated eggs. It was not present in non-irradiated eggs and in tart layers produced from them. (orig./Vhe)

Embrittlement of irradiated ferritic/martensitic steels in the absence of irradiation hardening

Energy Technology Data Exchange (ETDEWEB)

Klueh, R.L. [Oak Ridge Noational Laboratory, TN (United States); Shiba, K. [Japan Atomic Energy Agency, Tokai-mura, Naga-gun, Ibaraki-ken (Japan); Sokolov, M. [Oak Ridge National Laboratory, Materials Science and Technology Div., TN (United States)

2007-07-01

Full text of publication follows: Neutron irradiation of 9-12% Cr ferritic/martensitic steels below 425-450 deg. C produces microstructural defects that cause an increase in yield stress and ultimate tensile strength. This irradiation hardening causes embrittlement, which is observed in Charpy impact and toughness tests as an increase in ductile-brittle transition temperature (DBTT). Based on observations that show little change in strength in these steels irradiated above 425-450 deg. C, the general conclusion has been that no embrittlement occurs above this irradiation-hardening temperature regime. In a recent study of F82H steel irradiated at 300, 380, and 500 deg. C, irradiation hardening-an increase in yield stress-was observed in tensile specimens irradiated at the two lower temperatures, but no change was observed for the specimens irradiated at 500 deg. C. As expected, an increase in DBTT occurred for the Charpy specimens irradiated at 300 and 380 deg. C. However, there was an unexpected increase in the DBTT of the specimens irradiated at 500 deg. C. The observed embrittlement was attributed to the irradiation-accelerated precipitation of Laves phase. This conclusion was based on results from a detailed thermal aging study of F82H, in which tensile and Charpy specimens were aged at 500, 550, 600, and 650 deg. C to 30,000 h. These studies indicated that there was a decrease in yield stress at the two highest temperatures and essentially no change at the two lowest temperatures. Despite the strength decrease or no change, the DBTT increased for Charpy specimens irradiated at all four temperatures. Precipitates were extracted from thermally aged specimens, and the amount of precipitate was correlated with the increase in transition temperature. Laves phase was identified in the extracted precipitates by X-ray diffraction. Earlier studies on conventional elevated-temperature steels also showed embrittlement effects above the irradiation-hardening temperature

Neutron Flux Characterization of Irradiation Holes for Irradiation Test at HANARO

Directory of Open Access Journals (Sweden)

Yang Seong Woo

2016-01-01

Full Text Available The High flux Advanced Neutron Application ReactOr (HANARO is a unique research reactor in the Republic of Korea, and has been used for irradiation testing since 1998. To conduct irradiation tests for nuclear materials, the irradiation holes of CT and OR5 have been used due to a high fast-neutron flux. Because the neutron flux must be accurately calculated to evaluate the neutron fluence of irradiated material, it was conducted using MCNP. The neutron flux was measured using fluence monitor wires to verify the calculated result. Some evaluations have been conducted, however, more than 20% errors have frequently occurred at the OR irradiation hole, while a good agreement between the calculated and measured data was shown at the CT irradiation hole.

Behavior of high Tc-superconductors and irradiated defects under reactor irradiation

International Nuclear Information System (INIS)

Atobe, Kozo; Honda, Makoto; Fukuoka, Noboru; Yoshida, Hiroyuki.

1991-01-01

It has been well known that the lattice defects of various types are introduced in ceramics without exception, and exert large effect to the function of these materials. Among oxides, the electronic materials positively using oxygen defect control have been already put in practical use. Also in the oxide high temperature superconductors which are Perovskite type composite oxides, the superconductive characteristics are affected largely by the concentration of the oxygen composing them. This is regarded as an important factor for causing superconductivity, related with the oxygen cavities arising at this time and the carriers bearing superconductivity. In this study, the irradiation effect with relatively low dose, the measurement under irradiation, the effect of irradiation temperature, and the effect of radiation quality were evaluated by the irradiation of YBCO, EBCO and LBCO. The experimental method, and the irradiation effect at low temperature and normal temperature, the effect of Co-60 gamma ray irradiation instead of reactor irradiation are reported. (K.I.)

Electron beam irradiating device

Energy Technology Data Exchange (ETDEWEB)

Shinohara, K

1969-12-20

The efficiency of an electron beam irradiating device is heightened by improving the irradiation atmosphere and the method of cooling the irradiation window. An irradiation chamber one side of which incorporates the irradiation windows provided at the lower end of the scanner is surrounded by a suitable cooling system such as a coolant piping network so as to cool the interior of the chamber which is provided with circulating means at each corner to circulate and thus cool an inert gas charged therewithin. The inert gas, chosen from a group of such gases which will not deleteriously react with the irradiating equipment, forms a flowing stream across the irradiation window to effect its cooling and does not contaminate the vacuum exhaust system or oxidize the filament when penetrating the equipment through any holes which the foil at the irradiation window may incur during the irradiating procedure.

Food irradiation

International Nuclear Information System (INIS)

Kobayashi, Yasuhiko; Kikuchi, Masahiro

2009-01-01

Food irradiation can have a number of beneficial effects, including prevention of sprouting; control of insects, parasites, pathogenic and spoilage bacteria, moulds and yeasts; and sterilization, which enables commodities to be stored for long periods. It is most unlikely that all these potential applications will prove commercially acceptable; the extend to which such acceptance is eventually achieved will be determined by practical and economic considerations. A review of the available scientific literature indicates that food irradiation is a thoroughly tested food technology. Safety studies have so far shown no deleterious effects. Irradiation will help to ensure a safer and more plentiful food supply by extending shelf-life and by inactivating pests and pathogens. As long as requirement for good manufacturing practice are implemented, food irradiation is safe and effective. Possible risks of food irradiation are not basically different from those resulting from misuse of other processing methods, such as canning, freezing and pasteurization. (author)

Under - diaphragm irradiation of an osseous stage 4 Hodgkin lymphoma at a patient whose pregnancy was unknown; Irradiation sous-diaphragmatique d'un lymphome hodgkinien de stade 4 osseux chez une patiente dont la grossesse etait meconnue

Energy Technology Data Exchange (ETDEWEB)

Moreau, M.V.; Tournier-Rangeard, L.; Brunaud, C.; Marchesi, V.; Peiffert, D. [Centre Alexis-Vautrin, Service de Radiotherapie, 54 - Vandoeuvre-les-Nancy (France); Bologna, S. [Centre Hospitalier Universitaire Brabois, Service d' Hematologie, 54 - Vandoeuvre-les-Nancy (France)

2007-11-15

Four years after the irradiation, the patient was in situation of complete forgiveness: the child was normal, there was neither a deformation nor a mental disorder, but the neoplastic risk persists, thus long-term surveillance is imperative. If the pregnancy is known, we have to arrest the foetal risks incurred in order to propose a termination of pregnancy; therefore, are made the measures on phantoms of the dose that he would receive, according to the tumoral localization, to the dose necessary to eradicate the tumor, to the field and the possible masks for an optimal tumoral control. (N.C.)

Facts about food irradiation: Microbiological safety of irradiated food

International Nuclear Information System (INIS)

1991-01-01

This fact sheet considers the microbiological safety of irradiated food, with especial reference to Clostridium botulinum. Irradiated food, as food treated by any ''sub-sterilizing'' process, must be handled, packaged and stored following good manufacturing practices to prevent growth and toxin production of C. botulinum. Food irradiation does not lead to increased microbiological hazards, nor can it be used to save already spoiled foods. 4 refs

Total body irradiation: current indications; L`irradiation corporelle totale: les indications actuelles

Energy Technology Data Exchange (ETDEWEB)

Giraud, P.; Danhier, S.; Dubray, B.; Cosset, J.M. [Institut Curie, 75 - Paris (France)

1998-05-01

The choice of dose and fractionation for total body irradiation is made difficult by the large number of considerations to be taken into account. The outcome of bone marrow transplantation after total body irradiation can be understood in terms of tumor cell killing, engraftment, and normal tissue damage, each of these endpoints being influenced by irradiation-, disease-, transplant-, and patient- related factors. Interpretation of clinical data is further hampered by the overwhelming influence of logistic constraints, the small numbers of randomized studies, and the concomitant variations in total dose and fraction size or dose rate. So far, three cautious conclusions can be drawn in order to tentatively adapt the total body irradiation schedule to clinically-relevant situations. Firstly, the organs at risk for normal tissue damage (lung, liver, lens, kidney) are protected by delivering small doses per fraction at low dose rate. This suggests that, when toxicity is at stake (e.g. in children), fractionated irradiation should be preferred, provided that inter-fraction intervals are long enough. Secondly, fractionated irradiation should be avoided in case of T-cell depleted transplant, given the high risk of graft rejection in this setting. An alternative would be to increase total (or fractional) dose of fractionated total body irradiation, but this approach is likely to induce more normal tissue toxicity. Thirdly, clinical data have shown higher relapse rates in chronic myeloid leukemia after fractionated or low dose rate total body irradiation, suggesting that fractionated irradiation should not be recommended, unless total (or fractional) dose is increased. Total body irradiation-containing regimens, primarily cyclophosphamide / total body irradiation, are either equivalent to or better than the chemotherapy-only regimens, primarily busulfan / cyclophosphamide. Busulfan / cyclophosphamide certainly represents a reasonable alternative, especially in patients who

Food irradiation

International Nuclear Information System (INIS)

Paganini, M.C.

1991-06-01

Food treatment by means of ionizing energy, or irradiation, is an innovative method for its preservation. In order to treat important volumes of food, it is necessary to have industrial irradiation installations. The effect of radiations on food is analyzed in the present special work and a calculus scheme for an Irradiation Plant is proposed, discussing different aspects related to its project and design: ionizing radiation sources, adequate civil work, security and auxiliary systems to the installations, dosimetric methods and financing evaluation methods of the project. Finally, the conceptual design and calculus of an irradiation industrial plant of tubercles is made, based on the actual needs of a specific agricultural zone of our country. (Author) [es

Biology of food irradiation

International Nuclear Information System (INIS)

Murray, D.R.

1990-01-01

The author presents his arguments for food scientists and biologists that the hazards of food irradiation outweigh the benefits. The subject is discussed in the following sections: introduction (units, mutagenesis, seed viability), history of food irradiation, effects of irradiation on organoleptic qualities of staple foods, radiolytic products and selective destruction of nutrients, production of microbial toxins in stored irradiated foods and loss of quality in wheat, deleterious consequences of eating irradiated foods, misrepresentation of the facts about food irradiation. (author)

DAMAGE IN MOLYBDENUM ASSOCIATED WITH NEUTRON IRRADIATION AND SUBSEQUENT POST-IRRADIATION ANNEALING

Energy Technology Data Exchange (ETDEWEB)

Mastel, B.

1963-07-23

Molybdemum containing carbon was studied in an attempt to establish the combined effect of impurity content and neutron irradiation on the properties and structure of specific metals. Molybdenum foils were punched into discs and heat treated in vacuum. They were then slow-cooled and irradiated. After irradiation and subsequent decay of radioactivity to a low level the foils were subjected to x-ray diffraction measurements. Cold-worked foils with less than 10 ppm carbon showed no change in microstructure due to irradiation. Molybdenum foils that were annealed prior to irradiation showed spot defects. In foils containing up to 500 ppm carbon, it was concluded that the small loops present after irradiation are due to the clustering of point defects at interstitial carbon atoms, followed by collapse to form a dislocation loop. The amount of lattice expansion after irradiation was strongly dependent on impurity content. Neutron irradiation was found to reduce the number of active slip systems. (M.C.G.)

Perspective on food irradiation

International Nuclear Information System (INIS)

Newsome, R.L.

1987-01-01

A brief review summarizes current scientific information on the safety and efficacy of irradiation processing of foods. Attention is focused on: specifics of the irradiation process and its effectiveness in food preservation; the historical development of food irradiation technology in the US; the response of the Institute of Food Technologists to proposed FDA guidelines for food irradiation; the potential uses of irradiation in the US food industry; and the findings of the absence of toxins and of unaltered nutrient density (except possibly for fats) in irradiated foods. The misconceptions of consumers concerning perceived hazards associated with food irradiation, as related to consumer acceptance, also are addressed

Fabrication of irradiation capsule for IASCC irradiation tests (2). Irradiation capsule for crack propagation test (Joint research)

International Nuclear Information System (INIS)

Ide, Hiroshi; Matsui, Yoshinori; Kawamata, Kazuo; Taguchi, Taketoshi; Kanazawa, Yoshiharu; Onuma, Yuichi; Watanabe, Hiroyuki; Inoue, Shuichi; Izumo, Hironobu; Ishida, Takuya; Saito, Takashi; Ishitsuka, Etsuo; Kawamura, Hiroshi; Kaji, Yoshiyuki; Ugachi, Hirokazu; Tsukada, Takashi

2008-03-01

It is known that irradiation Assisted Stress Corrosion Cracking (IASCC) occurs when austenitic stainless steel components used for light water reactor (LWR) are irradiated for a long period. In order to evaluate the high aging of the nuclear power plant, the study of IASCC becomes the important problem. The specimens irradiated in the reactor were evaluated by post irradiation examination in the past study. For the appropriate evaluation of IASCC, it is necessary to test it under the simulated LWR conditions; temperature, water chemistry and irradiation conditions. In order to perform in-pile SCC test, saturated temperature capsule (SATCAP) was developed. There are crack growth test, crack propagation test and so on for in-pile SCC test. In this report, SATCAP for crack propagation test is reported. (author)

Fabrication of irradiation capsule for IASCC irradiation tests (1). Irradiation capsule for crack growth test (Joint research)

International Nuclear Information System (INIS)

Ide, Hiroshi; Matsui, Yoshinori; Kawamata, Kazuo; Taguchi, Taketoshi; Kanazawa, Yoshiharu; Onuma, Yuichi; Watanabe, Hiroyuki; Inoue, Shuichi; Izumo, Hironobu; Ishida, Takuya; Saito, Takashi; Ishitsuka, Etsuo; Kawamura, Hiroshi; Kaji, Yoshiyuki; Ugachi, Hirokazu; Tsukada, Takashi

2008-03-01

It is known that Irradiation Assisted Stress Corrosion Cracking (IASCC) occurs when austenitic stainless steel components used for light water reactor (LWR) are irradiated for a long period. In order to evaluate the high aging of the nuclear power plant, the study of IASCC becomes the important problem. The specimens irradiated in the reactor were evaluated by post irradiation examination in the past study. For the appropriate evaluation of IASCC, it is necessary to test it under the simulated LWR conditions; temperature, water chemistry and irradiation conditions. In order to perform in-pile SCC test, saturated temperature capsule (SATCAP) was developed. There are crack growth test, crack propagation test and so on for in-pile SCC test. In this report, SATCAP for crack growth test is reported. (author)

Irradiation of foodstuffs

International Nuclear Information System (INIS)

Bugyaki, L.

1977-01-01

The author studies the criteria for the harmlessness of irradiation as a food-preservation process. The glucose and proteins of bacto-tryptone, irradiated at 5 Mrads, do not increase the Escherichia Coli C 600 lysogenous bacteriophages, compared to the induction produced by direct irradiation of the strain or to the exposition to nitrogenous yperite. The possible mutagenic effect is therefore different. Wheat flour freshly irradiated at 5 Mrads shows physico-chemical changes. When given to mice as 50% of their ration, it leads to a higher incidence of tumours and a greater number of meiotic chromosome alteration (besides some discreet physio-pathological changes in fertility and longevity). Immunoelectrophoresis in agar or agarose gel does not allow any detection of irradiation of meat, fish or eggs. A vertical electrophoresis in starch gel can lead to a differentiation between frozen or chilled meat and the one that is irradiated at 0.5 or 5 Mrads, but the same thing can't be said for fish or eggs. Lastly an irradiated mushroom shows every sign of freshness but, when planted in a suitable medium, its cuttings do not present any cell proliferation which could give a rapid and simple method of detecting the irradiation. (G.C.)

Blood irradiation

International Nuclear Information System (INIS)

Chandy, Mammen

1998-01-01

Viable lymphocytes are present in blood and cellular blood components used for transfusion. If the patient who receives a blood transfusion is immunocompetent these lymphocytes are destroyed immediately. However if the patient is immunodefficient or immunosuppressed the transfused lymphocytes survive, recognize the recipient as foreign and react producing a devastating and most often fatal syndrome of transfusion graft versus host disease [T-GVHD]. Even immunocompetent individuals can develop T-GVHD if the donor is a first degree relative since like the Trojan horse the transfused lymphocytes escape detection by the recipient's immune system, multiply and attack recipient tissues. T-GVHD can be prevented by irradiating the blood and different centers use doses ranging from 1.5 to 4.5 Gy. All transfusions where the donor is a first degree relative and transfusions to neonates, immunosuppressed patients and bone marrow transplant recipients need to be irradiated. Commercial irradiators specifically designed for irradiation of blood and cellular blood components are available: however they are expensive. India needs to have blood irradiation facilities available in all large tertiary institutions where immunosuppressed patients are treated. The Atomic Energy Commission of India needs to develop a blood irradiator which meets international standards for use in tertiary medical institutions in the country. (author)

Study of the recrystallisation of irradiated uranium; Etude sur l'uranium irradie

Energy Technology Data Exchange (ETDEWEB)

Bloch, J; Mustelier, J P; Bussy, P; Blin, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

1- Study of the recrystallisation of irradiated uranium. The recrystallisation of uranium irradiated to a burnup level of 220 MWj/t, at a temperature of the order of 350 deg. C, has been investigated. The observations were made chiefly by means of micrography an hardness measurements. If the irradiated metal is compared with a cold-drawn metal showing the same shearing of the twinned crystals, and therefore the same rate of plastic deformation, as the irradiated metal, it is noted that the restoring of the irradiated metal takes place at a considerably higher temperature than that of the cold-drawn metal. Pre-crystallisation is very much delayed. Only, a passage of the {alpha}-{beta} transformation point quickly wipes out irradiation effect. 2- Hardening of uranium by irradiation. Using hardness measurements we have studied more especially the effect of very weak irradiations on uranium (integrated flux < 10{sup 16} nvt). The hardness does not increase linearly with the flux, but a period of incubation is observed probably representing the time necessary for saturation of the dislocations. (author)Fren. [French] 1- Etude de la recristallisation de l'uranium irradie. On a etudie la recristallisation d'uranium irradie jusqu'a un taux de combustion de 220 MWj/t a une temperature de l'ordre de 350 deg. C. Les observations ont ete faites principalement a l'aide de la micrographie et de la durete. Si l'on compare le metal irradie avec un metal ecroui presentant le meme cisaillement des macles, donc le meme taux de deformation plastique que le metal irradie, on constate que la restauration du metal irradie se fait a une temperature notablement superieure a celle du metal ecroui. La recristallisation est tres retardee. Seul, un passage du point de transformation {alpha}-{beta} efface rapidement l'effet de l'irradiation. 2- Durcissement de l'uranium par irradiation. Nous avons, a l'aide de la durete, etudie plus particulierement l'effet de tres faibles irrtions sur l

Property changes in graphite irradiated at changing irradiation temperature

International Nuclear Information System (INIS)

Price, R.J.; Haag, G.

1979-07-01

Design data for irradiated graphite are usually presented as families of isothermal curves showing the change in physical property as a function of fast neutron fluence. In this report, procedures for combining isothermal curves to predict behavior under changing irradiation temperatures are compared with experimental data on irradiation-induced changes in dimensions, Young's modulus, thermal conductivity, and thermal expansivity. The suggested procedure fits the data quite well and is physically realistic

Process and apparatus for irradiating film, and irradiated film

International Nuclear Information System (INIS)

1981-01-01

A process for irradiating film is described, which consists of passing the film through an electron irradiation zone having an electron reflection surface disposed behind and generally parallel to the film; and disposing within the irradiation zone adjacent the edges of the film a lateral reflection member for reflecting the electrons toward the reflection surface to further reflect the reflected electrons towards the adjacent edges of the film. (author)

Influence of hydrogen on metals behavior. 1 - Mechanical behavior of Ti 6 pc Al 6 pc V 2 pc Sn titanium alloy versus hydrogen: influence of heat treatment and of oxygen content; Influence de l'hydrogene sur le comportement des metaux. 1 - comportement mecanique de l'alliage de titane T A6 V6 E2 vis-a-vis de l'hydrogene: influence du traitement thermique et de la teneur en oxygene

Energy Technology Data Exchange (ETDEWEB)

Schaller, Bernard

1972-06-26

The mechanical behavior of Ti 6 pc Al 6 pc V Sn alloy during dynamic testing has been investigated versus hydrogen and oxygen content. The hydrogen susceptibility depends only slightly on its microstructure, acicular or equi-axed: it depends much more on conditions of hydrogen contamination and on the thermal history afterward. When the alloy has been stabilized by annealing in {alpha} - {beta} and provided hydrogen absorption does not induce phase transformations, hydrogen sensitivity is relatively low: brittleness occurs suddenly but at a high concentration threshold (2000 ppm H), which coincides with hydrogen saturation of {beta} phase. When the alloy includes unstabilized phases, its response to hydrogen changes whether it has been finally annealed or not, in the 300 - 500 C temperature area, prone to {omega} phase formation. In the absence of such an annealing, a reduction in ductility only occurs at high concentrations (> 1500 ppm H). In the other and, after annealing at 400 C, alloy hardening and a ductility decrease start even at the lowest hydrogen amounts: then hydrogen susceptibility is very high. Low oxygen concentration (up to 2000 ppm) do not sensibly affect the good hydrogen tolerance of this alloy. Beyond 2500 ppm, oxygen, while improving tensile strength, yet severely decreases ductility. [French] Le comportement mecanique de l'alliage TA6-V6-E2 lors d'un essai dynamique a ete etudie en fonction de la teneur en hydrogene et en oxygene. La sensibilite vis-a-vis de l'hydrogene ne depend que tres faiblement de sa structure migrographique, aciculaire ou equiaxe; elle depend bien plus des conditions de contamination par l'hydrogene et de son histoire thermique apres contamination. Lorsque l'alliage a ete stabilise par un recuit dans le domaine biphase, et a condition que l'absorption d'hydrogene n'entraine pas de modification structurale, la sensibilite vis-a-vis de l'hydrogene est relativement faible: la fragilite apparait brutalement mais pour un

The health physics of installations for decladding irradiated fuels or for handling radio-elements at Marcoule; La radioprotection des installations de degainage des combustibles irradies et des radio-elements a Marcoule

Energy Technology Data Exchange (ETDEWEB)

Chassany, J; Guillermin, P; Mallet, P [Commissariat a l' Energie Atomique, Centre de Production de Plutonium de Marcoule, 30 - Chusclan (France)

1966-07-01

Radiation protection practices for handling reactor fuel elements are described. Elements of considerable specific radioactivity are handled under water. A study was made of water filtration and of ventilation in the building. The installations are divided up into zones depending on the radioactive risks, and the radiation level atmospheric contamination are the object of a systematic control at various points. A description is given of all aspects of health physics which have been encountered during six years: storage, transfer of radioactive material; decladding, rolling, waste disposal, specialized operations, installations in operation and at rest, and transport. In spite of the gradual increase in the activity of these installations, the total doses received by the personnel have hardly altered and the number of cases of physical contamination has diminished. (authors) [French] Dans ces installations, se manipulent sous l'eau des elements a radioactivite specifique considerable. La filtration de l'eau, la ventilation ont ete particulierement etudiees. L'ensemble a ete divise en lieux classes en fonction des risques radioactifs et des appareils controlent en permanence l'irradiation et la contamination atmospherique en certains points. Tous les aspects de la radioprotection resultant de six annees d'experience relatifs: au stockage, au deconteneurage, au degainage, au laminage, a l'evacuation des residus, aux travaux particuliers, installations en marche et a l'arret, et aux transports sont successivement decrits. Malgre l'accroissement progressif de l'activite de cet ensemble, les doses integrees par le personnel n'ont pratiquement pas augmente et le nombre des cas de contamination corporelle a diminue. (auteurs)

Differential systems of flux and concentrations of a mixture in the separation by a plant (1963); Systemes differente des flux et des concentrations d'un melange en separation par une usine etagee (1963)

Energy Technology Data Exchange (ETDEWEB)

Bouligand, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-11-15

The study of transient flux and concentrations of a mixture in the separation by a plant with different interdependent stages leads to an examination of the solutions of certain types of differential systems. These systems are obtained from the representative graph of the plant and have a structural form. By Olga TAUSSKY's theorem and the introduction of steerable distances, the solutions of these systems are chiefly examined in their asymptotic behaviour. The appendix shows that solutions of partial differential equations relative to plants made of cascades with a slight separation have analogous properties. (author) [French] La recherche des regimes transitoires des flux et des concentrations d'un melange en separation par une usine etagee de forme quelconque conduit a etudier les solutions de certains types de systemes differentiels. Ces systemes sont deduits du graphe representatif de l'usine, et apparaissent sous une forme structuree. A l'aide du theoreme d'Olga TAUSSKY et par l'introduction d'ecarts orientes, les solutions de ces systemes sont principalement examinees dans leur comportement asymptotique. Un appendice montre que les solutions des systemes d'equations aux derivees partielles des usines en cascades a tres faible separation admettent des proprietes analogues. (auteur)

Énergie et bois dans le territoire alpin : stratégies autour d'une ressource incertaine

Directory of Open Access Journals (Sweden)

Hélène Avocat*

2012-02-01

Full Text Available Depuis dix ans, le bois-énergie se développe dans les territoires alpins, sous l’impulsion de politiques volontaristes. Face à l'épuisement prochain des produits connexes de scierie, déjà largement utilisés dans la papeterie, la panneauterie et la granulation, la plaquette forestière est amenée à se développer pour des usages industriels ou locaux. Il s’agit d’une opportunité pour les territoires et les forêts alpines, dont la vulnérabilité doit cependant être prise en compte dans la délicate conciliation d'objectifs économiques et environnementaux. L’étude des différentes politiques et dispositifs montre des approches très différentes.  Cela peut générer des tensions sur la ressource et donner lieux à des comportements contradictoires avec le développement d’une énergie dite verte : allongements des distances de transports et donc des émissions de polluants, dégradation de l’environnement et de la multifonctionnalité des forêts, etc.

La prodigieuse odyssée des particules élémentaires du bigbang jusqu'aux être pensants, et ensuite ? : essai

CERN Document Server

Bourdinaud, Michel

2017-01-01

Notre univers est un fragment échappé du chaos fondamental au travers du Big Bang et cristallisé sous une forme stable d’un point de vue cosmique. Bien des questions restent sans réponse. • Pourquoi y a-t-il quelque chose plutôt que rien ? • Ce quelque chose est-il le fruit d’un dessein ? • D’où proviennent les lois physiques qui gouvernent l’univers ? • Comment expliquer l’insolite et incessante organisation de la matière depuis le Big Bang ? • L’eau est une des clés de la vie, pourquoi une telle quantité sur la Terre ? • Par quel prodige les particules élémentaires sont-elles parvenues à constituer des êtres pensants ? Dans une expansion vertigineuse aux allures de fuite en avant, l’humanité aborde une crise majeure, car son économie est dévastatrice et ses comportements irrationnels la mènent au bord de l’autodestruction. Parvenir au contrôle des moyens d’anéantissement qu’elle a elle-même enfantés, ainsi que rapidement mettre un terme au pillag...

Relative measurement of the fluxes of thermal, resonant and rapid neutrons in reactor G1; Mesures relatives des flux thermique, resonnant et rapide dans le reacteur G1

Energy Technology Data Exchange (ETDEWEB)

Carle, R; Mazancourt, T de [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1957-07-01

We sought to determine the behavior of the thermal, resonant and rapid neutron fluxes in the multiplier-reflector transition region, in the two principal directions of the system. We have also measured the variation of these different fluxes in the body of the multiplier medium in a canal filled with graphite and in an empty canal. The results are given in the form of curves representing: - the variation of the ratio of the thermal flux to the rapid flux in axial and radial transitions - the behavior of the thermal and resonant fluxes and the variation of their ratio in the same regions. (author) [French] Nous avons cherche a determiner le comportement des differents flux, thermique, resonnant et rapide a la transition milieu multiplicateur-reflecteur dans les deux directions principales du reseau. Nous avons egalement mesure la variation de ces differents flux au sein du milieu multiplicateur dans un canal rempli de graphite et dans un canal vide. Les resultats sont donnes sous forme de courbe representant: - La variation du rapport du flux thermique au flux rapide aux transitions axiale et radiale - L'allure des flux thermique et resonnant et la variation de leur rapport dans les memes regions. (auteur)

Monte-Carlo method - codes for the study of criticality problems (on IBM 7094); Methode de Monte- Carlo - codes pour l'etude des problemes de criticite (IBM 7094)

Energy Technology Data Exchange (ETDEWEB)

Moreau, J; Rabot, H; Robin, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

The two codes presented here allow to determine the multiplication constant of media containing fissionable materials under numerous and divided forms; they are based on the Monte-Carlo method. The first code apply to x, y, z, geometries. The volume to be studied ought to be divisible in parallelepipeds, the media within each parallelepiped being limited by non-secant surfaces. The second code is intended for r, 0, z geometries. The results include an analysis of collisions in each medium. Applications and examples with informations on time and accuracy are given. (authors) [French] Les deux codes presentes dans ce rapport permettent la determination des coefficients de multiplication de milieux contenant des matieres fissiles sous des formes tres variees et divisees, ils reposent sur la methode de Monte-Carlo. Le premier code s'applique aux geometries x, y, z, le volume a etudier doit pouvoir etre decompose en parallelepipedes, les milieux a l'interieur de chaque parallelepipede etant limites par des surfaces non secantes. Le deuxieme code s'applique aux geometries r, 0, z. Les resultats comportent une analyse des collisions dans chaque milieu. Des applications et des exemples avec les indications de temps et de precision sont fournis. (auteurs)

Irradiation enhanced diffusion and irradiation creep tests in stainless steel alloys

International Nuclear Information System (INIS)

Loelgen, R.H.; Cundy, M.R.; Schuele, W.

1977-01-01

A review is given of investigations on the rate of phase changes during neutron and electron irradiation in many different fcc alloys showing either precipitation or ordering. The diffusion rate was determined as a function of the irradiation flux, the irradiation temperature and the irradiation dose. It was found that the radiation enhanced diffusion in all the investigated alloys is nearly temperature independent and linearly dependent on the flux. From these results conclusions were drawn concerning the properties of point defects and diffusion mechanisms rate determining during irradiation, which appears to be of a common nature for fcc alloys having a similar structure to those investigated. It has been recognized that the same dependencies which are found for the diffusion rate were also observed for the irradiation creep rate in stainless steels, as reported in literature. On the basis of this observation a combination of measurements is suggested, of radiation enhanced diffusion and radiation enhanced creep in stainless steel alloys. The diffusion tests will be performed at the Euratom Joint Research Centre in Ispra, Italy, and the irradiation creep tests will be carried out in the High Flux Reactor /9/ of the Euratom Joint Research Centre in Petten, The Netherlands. In order to investigate irradiation creep on many samples at a time two special rigs were developed which are distinguished only by the mode of stress applied to the steel specimens. In the first type of rig about 50 samples can be tested uniaxially under tension with various combinations of irradiation temperature and stress. The second type of rig holds up to 70 samples which are tested in bending, again with various combinations of irradiation temperature and stress

Technical review on irradiation tests and post-irradiation examinations in JMTR

International Nuclear Information System (INIS)

2017-07-01

The Japan Materials Testing Reactor (JMTR) has been contributing to various R and D activities in the nuclear research such as the fundamental research of nuclear materials/ fuels, safety research and development of power reactors, radio isotope (RI) production since its beginning of the operation in 1968. Irradiation technologies and post irradiation examination (PIE) technologies are the important factors for irradiation test research. Moreover, these technologies induce the breakthrough in area of nuclear research. JMTR has been providing unique capabilities for the irradiation test research for about 40 years since 1968. In future, any needs for irradiation test research used irradiation test reactors will continue, such as R and D of generation 4 power reactors, fundamental research of materials/fuels, RI production. Now, decontamination and new research reactor construction are common issue in the world according to aging. This situation is the same in Japan. This report outlines irradiation and PIE technologies developed at JMTR in 40 years to contribute to the technology transfer and human resource development. We hope that this report will be used for the new research rector design as well as the irradiation test research and also used for the human resource development of nuclear engineers in future. (author)

Effect of medium and post-irradiation storage on rooting of irradiated onions

International Nuclear Information System (INIS)

Singh, Rita

2000-01-01

Rooting test for detection of irradiation in onion bulbs was studied. Onions were exposed to different dose levels of 30, 60, 90, 120 and 150 Gy. The effects of irradiation dose, cultivar difference, rooting medium and post-irradiation storage on the rooting were investigated. The number and the length of the roots formed in onions were found to decrease on irradiation. The effect was more at higher doses. The effect of irradiation on rooting was also evident after 120 days of storage. (author)

Irradiation and flavor

International Nuclear Information System (INIS)

Reineccius, G.A.

1992-01-01

Flavor will not be a significant factor in determining the success of irradiated foods entering the U.S. market. The initial applications will use low levels of irradiation that may well result in products with flavor superior to that of products from alternative processing techniques (thermal treatment or chemical fumigation). The success of shelf-stable foods produced via irradiation may be much more dependent upon our ability to deal with the flavor aspects of high levels of irradiation

Dosimetry and irradiation methods for the ANSTO gamma technology research irradiator (GATRI)

International Nuclear Information System (INIS)

Izard, M.E.

1988-07-01

The Australian Nuclear Science and Technology Organisation's gamma technology research irradiator (GATRI) at Lucas Heights, New South Wales, has been modified for use as a research and small-scale commercial irradiation facility to be available to government agencies and private industry for the technical and economic evaluation of irradiation processing. The new source rack was designed around existing mechanical components to optimise the limited space available within the irradiation cell. Irradiation parameters investigated during commissioning included the effect of source-to-target distance on relative dose rates within targets of the same density; effect of density on dose-rate distribution within targets irradiated at the same distance from the source; and the contribution of transit dose to low absorbed doses as the source is raised and lowered. The efficiency of the irradiator was determined for various target densities and overdose ratios

The influence of late-stage pupal irradiation and increased irradiated: un-irradiated male ratio on mating competitiveness of the malaria mosquito Anopheles arabiensis Patton.

Science.gov (United States)

Helinski, M E H; Knols, B G J

2009-06-01

Competitiveness of released males in genetic control programmes is of critical importance. In this paper, we explored two scenarios to compensate for the loss of mating competitiveness after pupal stage irradiation in males of the malaria mosquito Anopheles arabiensis. First, competition experiments with a higher ratio of irradiated versus un-irradiated males were performed. Second, pupae were irradiated just prior to emergence and male mating competitiveness was determined. Males were irradiated in the pupal stage with a partially or fully-sterilizing dose of 70 or 120 Gy, respectively. Pupae were irradiated aged 20-26 h (young) as routinely performed, or the pupal stage was artificially prolonged by cooling and pupae were irradiated aged 42-48 h (old). Irradiated males competed at a ratio of 3:1:1 to un-irradiated males for mates in a large cage design. At the 3:1 ratio, the number of females inseminated by males irradiated with 70 Gy as young pupae was similar to the number inseminated by un-irradiated males for the majority of the replicates. At 120 Gy, significantly fewer females were inseminated by irradiated than by un-irradiated males. The irradiation of older pupae did not result in a significantly improved male mating competitiveness compared to the irradiation of young pupae. Our findings indicate that the loss of competitiveness after pupal stage irradiation can be compensated for by a threefold increase of irradiated males, but only for the partially-sterilizing dose. In addition, cooling might be a useful tool to facilitate handling processes of large numbers of mosquitoes in genetic control programmes.

Irradiation device

International Nuclear Information System (INIS)

Suzuki, Toshimitsu.

1989-01-01

In an irradiation device for irradiating radiation rays such as electron beams to pharmaceuticals, etc., since the distribution of scanned electron rays was not monitored, the electron beam intensity could be determined only indirectly and irradiation reliability was not satisfactory. In view of the above, a plurality of monitor wires emitting secondary electrons are disposed in the scanning direction near a beam take-out window of a scanning duct, signals from the monitor wires are inputted into a display device such as a cathode ray tube, as well as signals from the monitor wires at the central portion are inputted into counting rate meters to measure the radiation dose as well. Since secondary electrons are emitted when electron beams pass through the monitor wires and the intensity thereof is in proportion with the intensity of incident electron beams, the distribution of the radiation dose can be monitored by measuring the intensity of the emitted secondary electrons. Further, uneven irradiation, etc. can also be monitored to make the radiation of irradiation rays reliable. (N.H.)

Sensory properties of irradiated foods

International Nuclear Information System (INIS)

Plestenjak, A.

1997-01-01

Food irradiation is a simple and effective preservation technique. The changes caused by irradiation depend on composition of food, on the absorbed dose, the water content and temperature during and after irradiation. In this paper the changes of food components caused by irradiation, doses for various food irradiation treatments, foods and countries where the irradiation is allowed, and sensory properties of irradiated food are reviewed

Irradiation-Induced Nanostructures

Energy Technology Data Exchange (ETDEWEB)

Birtcher, R.C.; Ewing, R.C.; Matzke, Hj.; Meldrum, A.; Newcomer, P.P.; Wang, L.M.; Wang, S.X.; Weber, W.J.

1999-08-09

This paper summarizes the results of the studies of the irradiation-induced formation of nanostructures, where the injected interstitials from the source of irradiation are not major components of the nanophase. This phenomena has been observed by in situ transmission electron microscopy (TEM) in a number of intermetallic compounds and ceramics during high-energy electron or ion irradiations when the ions completely penetrate through the specimen. Beginning with single crystals, electron or ion irradiation in a certain temperature range may result in nanostructures composed of amorphous domains and nanocrystals with either the original composition and crystal structure or new nanophases formed by decomposition of the target material. The phenomenon has also been observed in natural materials which have suffered irradiation from the decay of constituent radioactive elements and in nuclear reactor fuels which have been irradiated by fission neutrons and other fission products. The mechanisms involved in the process of this nanophase formation are discussed in terms of the evolution of displacement cascades, radiation-induced defect accumulation, radiation-induced segregation and phase decomposition, as well as the competition between irradiation-induced amorphization and recrystallization.

Transport de pétroles bruts lourds sous forme d'émulsion huile dans eau Transporting Heavy Crude Oils in Oil in Water Emulsions

Directory of Open Access Journals (Sweden)

Briant J.

2006-11-01

Full Text Available Des études préliminaires concernant le comportement visqueux d'émulsions d'un pétrole lourd très visqueux (Boscan, Venezuela dans de l'eau additionnée d'un tensioactif anionique ont été réalisées. Elles montrent que, pour la gamme des vitesses de cisaillement existant dans le transport par oléoduc, des réductions de viscosité de plusieurs ordres de grandeur par rapport à la viscosité du pétrole peuvent être obtenues avec des fractions volumiques de la phase dispersée de l'ordre de 60 %. This article describes a preliminary research on the viscous behavior of emulsions of a highly viscous heavy crude oil (Boscan, Venezuela in water containing an anionic surfactant. In the range of the shear rates usually encountered in pipelines, it is shown that the viscosity can be reduced by several orders of magnitude as compared with the crude oil viscosity, and th is for volume fractions of the dispersed phase in the range of 60%.

Food irradiation

International Nuclear Information System (INIS)

Luecher, O.

1979-01-01

Limitations of existing preserving methods and possibilities of improved food preservation by application of nuclear energy are explained. The latest state-of-the-art in irradiation technology in individual countries is described and corresponding recommendations of FAO, WHO and IAEA specialists are presented. The Sulzer irradiation equipment for potato sprout blocking is described, the same equipment being suitable also for the treatment of onions, garlic, rice, maize and other cereals. Systems with a higher power degree are needed for fodder preserving irradiation. (author)

Food irradiation

International Nuclear Information System (INIS)

Anon.

1984-01-01

Food preservation by irradiation is one part of Eisenhower's Atoms for Peace program that is enjoying renewed interest. Classified as a food additive by the Food, Drug, and Cosmetic Act of 1958 instead of a processing technique, irradiation lost public acceptance. Experiments have not been done to prove that there are no health hazards from gamma radiation, but there are new pressures to get Food and Drug Administration approval for testing in order to make commercial use of some radioactive wastes. Irradiation causes chemical reactions and nutritional changes, including the destruction of several vitamins, as well as the production of radiolytic products not normally found in food that could have adverse effects. The author concludes that, lacking epidemiological evidence, willing buyers should be able to purchase irradiated food as long as it is properly labeled

Efficacy of Combined Sous Vide-Microwave Cooking for Foodborne Pathogen Inactivation in Ready-to-Eat Chicory Stems.

Science.gov (United States)

Renna, Massimiliano; Gonnella, Maria; de Candia, Silvia; Serio, Francesco; Baruzzi, Federico

2017-07-01

There is a variety of different food processing methods, which can be used to prepare ready-to-eat foods. However, the need to preserve the freshness and nutritional qualities leads to the application of mild technologies which may be insufficient to inactivate microbial pathogens. In this work, fresh chicory stems were packed under a vacuum in films, which were transparent to microwaves. These were then exposed to microwaves for different periods of time. The application of sous vide microwave cooking (SV-MW, 900 W, 2450 MHz), controlled naturally occurring mesophilic aerobic bacteria, yeasts and molds for up to 30 d when vacuum-packed vegetables were stored at 4 °C. In addition, the process lethality of the SV-MW 90 s cooking was experimentally validated. This treatment led to 6.07 ± 0.7 and 4.92 ± 0.65 log cfu/g reduction of Escherichia coli and Listeria monocytogenes inoculated over the chicory stems (100 g), respectively. With an initial load of 9 log cfu/g for both pathogens, less than 10 cfu/g of surviving cells were found after 90 s cooking. This shows that short-time microwave cooking can be used to effectively pasteurize vacuum-packed chicory stems, achieving >5 log cfu/g reduction of E. coli and L. monocytogenes. © 2017 Institute of Food Technologists®.

Facts about food irradiation: Packaging of irradiated foods

International Nuclear Information System (INIS)

1991-01-01

This fact sheet considers the effects on packaging materials of food irradiation. Extensive research has shown that almost all commonly used food packaging materials toted are suitable for use. Furthermore, many packaging materials are themselves routinely sterilized by irradiation before being used. 2 refs

Cost-benefit analysis of irradiation of vegetables and fruits at the Shanghai irradiation centre

International Nuclear Information System (INIS)

Xu Zhicheng; Sha Zhenyuan

1993-01-01

Differences between the developing and the developed countries in development and application of food irradiation are discussed, including the objectives of irradiation, scale, and the operation and control of facilities. These represent the chief problems of development of food irradiation in the developing countries. A proposal concerning the economic benefit of a gamma irradiation facility is discussed. In the light of many years' operating experience at the Shanghai Irradiation Centre, the operation cost per hour and coefficient of economic benefit are presented. These data can be used to estimate the economic benefit of gamma irradiated products at any time, and are useful for directing the daily operation of gamma irradiation facilities. From examples of cost-benefit analysis of irradiated garlic and apples it is shown that to improve the benefit of gamma irradiation facilities the annual hours of operation must be increased, so as to reduce the cost of operation. Food irradiated with a low dose provides more economic benefit than other irradiated products; the coefficients of economic benefit will increase as the irradiated processing throughput increases. Practical examples are given relating to garlic and apples, showing the economic benefit to wholesalers and retailers. (author). 4 refs, 3 figs, 7 tabs

Detection of irradiated strawberries by identifying ESR peak of irradiated cellulose component

International Nuclear Information System (INIS)

Goto, Michiko; Tanabe, Hiroko

2002-01-01

The method of detecting low-dose irradiated strawberries by identifying ESR peak of irradiated cellulose component was studied. Ratio of peak height (S) of high magnetic field cellulose component, and noise width (N) of either irradiated or unirradiated seeds of strawberries were compared. In this study, sample was identified to be irradiated when S/N ratio of ESR spectrum of 4 min. sweep time was above 0.7. In the case of S/N ratio below 0.7, when the S/N ratio of integrated ESR spectrum, obtained from measuring 10 times with 1 min. sweep time was above 1.0, the sample was identified to be irradiated. The result suggests that S/N ratio is a good marker to detect the irradiation. The strawberries irradiated above 0.5kGy was able to be detected after 3 days storage at room temperature, after 21 days refrigeration and after 60 days freezing, respectively. (author)

Irradiation and Post-Irradiation Storage of Chicken: Effects on Fat and Proteins

International Nuclear Information System (INIS)

Abou-Tarboush, H.M.; Al-Kahtani, H.A.; Abou-Arab, A.A.; Atia, M.; Bajaber, A.S.; Ahmed, M.A.; El-Mojaddidi, M.A.

1997-01-01

Chicken were subjected to gamma irradiation doses of 2.5, 5.0, 7.5 and 10.0 KGy and post-irradiation storage of 21 days at 4±2º. The effects on fat and protein of chicken were studied. Rate of formation of total volatile basic-nitrogen was less in irradiated samples particularly in samples treated with 5.0KGy during the entire storage. Fatty acid profiles of chicken lipids were not significantly (P≤ 0.05) affected by irradiation especially at doses of 5.0 KGy. However, irradiation caused a large increase in thiobarbituric acid (TBA) values which continued gradually during storage. Changes in amino acids were minimal. Irradiated and unirradiated samples showed the appearance of protein subunits with molecular weights in the range of 10.0 to 88.0 and 10.0 to 67.0 KD, respectively. No changes were observed in the sarcoplasmic protein but the intensity of bands in all irradiated samples decreased after 21 days of storage

Food irradiation: fiction and reality

International Nuclear Information System (INIS)

1991-01-01

The International Consultative Group on Food Irradiation (IGCFI), sponsored by World Health Organization (WHO), Food and Agriculture Organization (FAO) and the International Atomic Energy Agency (IAEA), with the intention to provide to governments, especially those of developing countries, scientifically correct information about food irradiation, decided to organize a file and questions of general public interest. The document is composed by descriptive files related with the actual situation and future prospective, technical and scientific terms, food irradiation and the radioactivity, chemical transformations in irradiated food, genetic studies, microbiological safety of irradiated food, irradiation and harmlessness, irradiation and additives, packing, irradiation facilities control, process control, irradiation costs and benefits as well as consumers reaction

Irradiation of food

International Nuclear Information System (INIS)

Lindell, B.; Danielsson-Tham, M.L.; Hoel, C.

1983-01-01

A committee has on instructions from the swedish government made an inquiry into the possible effects on health and working environment from irradition of food. In this report, a review is presented on the known positiv and negative effects of food irradiation Costs, availabilty, shelf life and quality of irradiated food are also discussed. According to the report, the production of radiolysis products during irradiation is not easily evaluated. The health risks from irradiation of spices are estimated to be lower than the risks associated with the ethenoxid treatment presently used. (L.E.)

Facts about food irradiation: Food irradiation costs

International Nuclear Information System (INIS)

1991-01-01

This fact sheet gives the cost of a typical food irradiation facility (US $1 million to US $3 million) and of the food irradiation process (US $10-15 per tonne for low-dose applications; US $100-250 per tonne for high-dose applications). These treatments also bring consumer benefits in terms of availability, storage life and improved hygiene. 2 refs

Facts about food irradiation: Nutritional quality of irradiated foods

International Nuclear Information System (INIS)

1991-01-01

This fact sheet briefly considers the nutritional value of irradiated foods. Micronutrients, especially vitamins, are sensitive to any food processing method, but irradiation does not cause any special nutritional problems in food. 4 refs

Saturation behavior of irradiation hardening in F82H irradiated in the HFIR

Energy Technology Data Exchange (ETDEWEB)

Hirose, T. [Blanket Engineering Group, Japan Atomic Energy Agency, Naka, Ibaraki (Japan); Shiba, K.; Tanigawa, H.; Ando, M. [Japan Atomic Energy Agency, Tokai-mura, Naga-gun, Ibaraki-ken (Japan); Klueh, R.L. [Oak Ridge National Laboratory, TN (United States); Stoller, R. [ORNL - Oak Ridge National Laboratory, Materials Science and Technology Div., Oak Ridge, AK TN (United States)

2007-07-01

Full text of publication follows: Post irradiation tensile tests on reduced activation ferritic/martensitic steel, F82H have been conducted over the past two decades using Japan Materials Testing Reactor (JMTR) of JAEA, and Fast Flux Testing Facility (FFTF) of PNNL and High Flux Isotope Reactor (HFIR) of ORNL, USA, under Japan/US collaboration programs. According to these results, F82H does not demonstrate irradiation hardening above 673 K up to 60 dpa. The current study has been concentrated on hardening behavior at temperature around 573 K. A series of low temperature irradiation experiment has been conducted at the HFIR under the international collaborative research between JAEA/US-DOE. In this collaboration, the irradiation condition is precisely controlled by the well matured capsule designing and instrumentation. This paper summarizes recent results of the irradiation experiments focused on F82H and its modified steels compared with the irradiation properties database on F82H. Post irradiation tensile tests have been conducted on the F82H and its modified steels irradiated at 573 K and the dose level was up to 25 dpa. According to these results, irradiation hardening of F82H is saturated by 9 dpa and the as-irradiated 0.2 % proof stress is less than 1 GPa at ambient temperature. The deterioration of total elongation was also saturated by 9 dpa irradiation. The ductility of some modified steels which showed larger total elongation than that of F82H before irradiation become the same level as that of standard F82H steel after irradiation, even though its magnitude of irradiation hardening is smaller than that of F82H. This suggests that the more ductile steel demonstrates the more ductility loss at this temperature, regardless to the hardening level. The difference in ductility loss behavior between various tensile specimens will be discussed as the ductility could depend on the specimen dimension. (authors)

16-rod-bundle: Irradiation in the MZFR and post-irradiation examinations

International Nuclear Information System (INIS)

Manzel, R.

1979-04-01

In the course of the irradiation of a 16-rod prototype bundle, the basis has been established for the irradiation of experimental fuel assemblies containing full-length PWR fuel rods in standard positions of the MZFR. The prototype bundle was discharged after an irradiation time of 284 full power days and a burnup of 11400 MWd/tU. The overall performance of the prototype bundle was highly satisfactory. Detailed post-irradiation examinations confirmed the good conditions of bundle structures and fuel rods. (orig.) [de

Mechanical properties of irradiated and non-irradiated Zr1%Nb and Zircaloy claddings

International Nuclear Information System (INIS)

Griger, Agnes

2004-01-01

The mechanical properties of irradiated and non-irradiated Zr1%Nb were determined and they were compared with the analogous properties of Zircaloy-4 to establish connections between the evolution of mechanical parameters of Zr1%Nb and Zircaloy-4 cladding materials and the measure of irradiation. Samples were irradiated in the vertical channels of the Budapest Research Reactor for different time periods at 50-65 C temperature. The measure of irradiation (fluent) for different samples was estimated by means of flux measurement and using the effective irradiation time. Post irradiation uniaxial tension tests in transverse direction were carried out on ring specimens. The mechanical parameters of the Zr1%Nb alloy significantly improve due to the effect of irradiation. However, the values of mechanical parameters do not further increase when the fluent increases above 10 20 n/cm 2 . These results are in good accordance with the Russian ones [1]. Contrary to the behaviour of Zr1%Nb alloy, the mechanical parameters of the Zircaloy practically do not change on the effect of irradiation. The originally high values of ultimate tensile strength and yield stress change only slightly with the increasing fluent in the investigated fluent-region. (Author)

Irradiation enhanced diffusion and irradiation creep tests in stainless steel alloys

International Nuclear Information System (INIS)

Loelgen, R.H.; Cundy, M.R.; Schuele, W.

1977-01-01

A review is given of investigations on the rate of phase changes during neutron and electron irradiation in many different fcc alloys showing either precipitation or ordering. The diffusion rate was determined as a function of the irradiation flux, the irradiation temperature and the irradiation dose. It was found that the radiation enhanced diffusion in all the investigated alloys is nearly temperature independent and linearly dependent on the flux. From these results conclusions were drawn concerning the properties of point defects and diffusion mechanisms rate determining during irradiation, which appears to be of a common nature for fcc alloys having a similar structure to those investigated. It has been recognized that the same dependencies which are found for the diffusion rate were also observed for the irradiation creep rate in stainless steels, as reported in literature. On the basis of this obervation a combination of measurements is suggested, of radiation enhanced diffusion and radiation enhanced creep in stainless steel alloys. Measurements of radiation enhanced diffusion are less time consuming and expensive than irradiation creep tests and information on this property can be obtained rather quickly, prior to the selection of stainless steel alloys for creep tests. In order to investigate irradiation creep on many samples at a time two special rigs were developed which are distinguished only by the mode of stress applied to the steel specimens. Finally, a few uniaxial tensile creep tests will be performed in fully instrumented rigs. (Auth.)

Food irradiation

International Nuclear Information System (INIS)

Hetherington, M.

1989-01-01

This popular-level article emphasizes that the ultimate health effects of irradiated food products are unknown. They may include vitamin loss, contamination of food by botulism bacteria, mutations in bacteria, increased production of aflatoxins, changes in food, carcinogenesis from unknown causes, presence of miscellaneous harmful chemicals, and the lack of a way of for a consumer to detect irradiated food. It is claimed that the nuclear industry is applying pressure on the Canadian government to relax labeling requirements on packages of irradiated food in order to find a market for its otherwise unnecessary products

Irradiation Facilities at CERN

CERN Document Server

Gkotse, Blerina; Carbonez, Pierre; Danzeca, Salvatore; Fabich, Adrian; Garcia, Alia, Ruben; Glaser, Maurice; Gorine, Georgi; Jaekel, Martin, Richard; Mateu,Suau, Isidre; Pezzullo, Giuseppe; Pozzi, Fabio; Ravotti, Federico; Silari, Marco; Tali, Maris

2017-01-01

CERN provides unique irradiation facilities for applications in many scientific fields. This paper summarizes the facilities currently operating for proton, gamma, mixed-field and electron irradiations, including their main usage, characteristics and information about their operation. The new CERN irradiation facilities database is also presented. This includes not only CERN facilities but also irradiation facilities available worldwide.

Isolation of chlamydia in irradiated and non-irradiated McCoy cells

International Nuclear Information System (INIS)

Johnson, L.; Harper, I.A.

1975-01-01

Specimens from eye and genital tract were cultured in parallel in irradiated and non-irradiated McCoy cells and the frequency of isolation of chlamydia using these culture methods was compared. There was a significant difference between the frequencies of isolation; irradiated McCoy cells produced a greater number of positive results. (author)

HRB-22 capsule irradiation test for HTGR fuel. JAERI/USDOE collaborative irradiation test

Energy Technology Data Exchange (ETDEWEB)

Minato, Kazuo; Sawa, Kazuhiro; Fukuda, Kousaku [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; and others

1998-03-01

As a JAERI/USDOE collaborative irradiation test for high-temperature gas-cooled reactor fuel, JAERI fuel compacts were irradiated in the HRB-22 irradiation capsule in the High Flux Isotope Reactor at the Oak Ridge National Laboratory (ORNL). Postirradiation examinations also were performed at ORNL. This report describes 1) the preirradiation characterization of the irradiation samples of annular-shaped fuel compacts containing the Triso-coated fuel particles, 2) the irradiation conditions and fission gas releases during the irradiation to measure the performance of the coated particle fuel, 3) the postirradiation examinations of the disassembled capsule involving visual inspection, metrology, ceramography and gamma-ray spectrometry of the samples, and 4) the accident condition tests on the irradiated fuels at 1600 to 1800degC to obtain information about fuel performance and fission product release behavior under accident conditions. (author)

Radiation therapy in leukemia (total body irradiation excluded); Irradiations pour leucemie a l`exclusion de l`irradiation corporelle totale

Energy Technology Data Exchange (ETDEWEB)

Peiffert, D.; Hoffstetter, S. [Centre Alexis-Vautrin, 54 - Vandoeuvre-les-Nancy (France). Dept. de Radiotherapie

1999-03-01

Radiation techniques and indications in leukemias have been described in detail, yet prophylactic cranial irradiation in acute leukemia still has few indications. Cerebrospinal and testicular irradiation are reserved for relapsing disease. Radiation usually results in rapid functional improvement when used in neurologic emergencies and symptomatic neurologic or gross tumors relapses. Nevertheless, the improvements recently obtained by systemic chemotherapy have resulted in the reduction in the use of irradiation, especially in children, where it was considered deleterious with neuropsychological sequelae. Splenic irradiation remains useful for symptomatic myelo-proliferative syndrome. (authors)

Sub-critical installations for continuous evaporations of up to 200 litres/hour - description and experimental results; Installations sous-critiques d'evaporation continue jusqu'a 200 litres/heure - description et resultats experimentaux

Energy Technology Data Exchange (ETDEWEB)

Auchapt, P; Bouzou, G C; Sautray, R R; Jacquotte, M C [Commissariat a l' Energie Atomique, Marcoule (France). Centre de Production de Plutonium de Marcoule

1965-07-01

In this report are given a detailed technological description and the test results obtained with two continuous evaporation units, one of 16 l/hr, the other of 65 l/hr. These installations are sub-critical with multiplication factors (k{sub eff}) for total reflection of 0.73 and 0.77. A third evaporator of 200 litres, also sub-critical (k{sub eff} = 0.90), is given as the limiting possible case. A description is also given of simple devices without regulator for maintaining a constant level in an extra flat, separator thus making it possible to operate without supervision in perfect safety at any concentration factor. The liberal thermal characteristics and the simple operational principles constitute a sure guarantee for operation in {alpha} and {gamma} conditions. (authors) [French] Dans ce rapport, on trouvera la description technologique detaillee et les resultats obtenus au cours des essais, de deux installations d'evaporation en continu, l'une de 16 l/h, l'autre de 65 l/h. Ces installations sont sous-critiques avec des facteurs de multiplication (k{sub eff}) en reflexion totale de 0,73 et 0,77. Un troisieme evaporateur, de 200 l/h, egalement sous-critique (k{sub eff} = 0,90), est donne comme cas limite realisable. On trouvera aussi la description de dispositifs simples, sans regulateur, permettant de garder un niveau constant dans un separateur extra-plat, ce qui permet une marche sans surveillance, en toute securite, a tous les facteurs de concentration. Les caracteristiques thermiques non poussees et les principes de fonctionnement simples, sont une garantie certaine pour l'exploitation en milieu {alpha} et {gamma}. (auteurs)

Planning of irradiation

Energy Technology Data Exchange (ETDEWEB)

Caha, A; Krystof, V [Vyzkumny Ustav Klinicke a Experimentalni Onkologie, Brno (Czechoslovakia)

1979-07-01

The principles are discussed of the planning of irradiation, ie., the use of the various methods of location of a pathological focus and the possibility of semiautomatic transmission of the obtained data on a two-dimensional or spatial model. An efficient equipment is proposed for large irradiation centres which should cooperate with smaller irradiation departments for which also a range of apparatus is proposed. Irradiation planning currently applied at the Research Institute of Clinical and Experimental Oncology in Brno is described. In conclusion, some of the construction principles of semi-automatic operation of radiotherapy departments are discussed.

Economics of gamma irradiation processing

International Nuclear Information System (INIS)

Tani, Toshio

1980-01-01

The gamma-ray irradiation business started at the Takasaki Laboratory of Japan Atomic Energy Research Institute. The irradiation facilities were constructed thereafter at various sites. The facilities must accept various types of irradiation, and must be constructed as multi-purpose facilities. The cost of irradiation consists of the cost of gamma sources, construction expense, personnel expense, management expense, and bank interest. Most of the expenses are considered to be fixed expense, and the amount of irradiation treatment decides the original costs of work. The relation between the irradiation dose and the construction expense shows the larger facility is more economical. The increase of amount of treatment reduces the original cost. The utilization efficiency becomes important when the amount of treatment and the source intensity exceed some values. The principal subjects of gamma-ray irradiation business are the sterilization of medical tools and foods for aseptic animals, the improvement of quality of plastic goods, and the irradiation of foods. Among them, the most important subject is the sterilization of medical tools. The cost of gamma irradiation per m 3 in still more expensive than that by ethylene oxide gas sterilization. However, the demand of gamma-ray irradiation is increasing. For the improvement of quality of plastic goods, electron irradiation is more favourable than the gamma irradiation. In near future, the economical balance of gamma irradiation can be achieved. (Kato, T.)

Investigation of persistent Multiplets at the EGS reservoir of Soultz-Sous-Forêts, France

Science.gov (United States)

Lengliné, O.; Cauchie, L.; Schmittbuhl, J.

2017-12-01

During the exploitation of geothermal reservoirs, abundant seismicity is generally observed, especially during phases of hydraulic stimulations. The induced seismicity at the Enhanced Geothermal System of Soultz-Sous-Forêts in France, has been thoroughly studied over the years of exploitation. The mechanism at its origin has been related to both fluid pressure increases during stimulation and aseismic creeping movements. The fluid-induced seismic events often exhibit a high degree of similarity and the mechanism at the origin of these repeated events is thought to be associated with slow slip process where asperities on the rupture zone act several times.To have a better understanding of the mechanisms associated with such events and on the damaged zones involved during the hydraulic stimulations, we investigate the behavior of the multiplets and their persistent nature over several water injection intervals. For this purpose, we analyzed large datasets recorded from a borehole seismic network for several water injection periods (1993, 2000). For each stimulation interval, thousands of events are recorded at depth. We detected the events using a STA/LTA approach and classified them into families of comparable waveforms using an approach based on cross-correlation analysis. Classification of the seismic events is then improved depending on their location within the multiplets. For this purpose, inter-event distances within multiplets are examined and determined from cross-correlation analysis between pairs of events. These distances are then compared to the source dimensions derived from the estimation of the corner frequencies estimation. The multiplets properties (location, events size) are then investigated within and over several hydraulic tests. Hopefully these steps will lead to increase the knowledge on the repetitive nature of these events and the investigation of their persistence will outline the heterogeneities of the structures (regional stress

Development of irradiation rig in HTTR and dosimetry method. I-I type irradiation equipment

Energy Technology Data Exchange (ETDEWEB)

Shibata, Taiju; Kikuchi, Takayuki [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Miyamoto, Satoshi; Ogura, Kazutomo [Japan Atomic Power Co., Tokyo (Japan)

2002-12-01

The High Temperature Engineering Test Reactor (HTTR) is a graphite-moderated, helium gas-cooled test reactor with a maximum power of 30 MW. The HTTR aims not only to establish and upgrade the technological basis for the HTGRs but also to perform the innovative basic research on high temperature engineering with high temperature irradiation fields. It is planned that the HTTR is used to perform various engineering tests such as the safety demonstration test, high temperature test operation and irradiation test with large irradiation fields at high temperatures. This paper describes the design of the I-I type irradiation equipment developed as the first irradiation rig for the HTTR and does the planned dosimetry method at the first irradiation test. It was developed to perform in-pile creep test on a stainless steel with large standard size specimens in the HTTR. It can give great loads on the specimens stably and can control the irradiation temperature precisely. The in-core creep properties on the specimens are measured by newly developed differential transformers and the irradiation condition in the core is monitored by thermocouples and self-powered neutron detectors (SPNDs), continuously. The irradiated neutron fluence is assessed by neutron fluence monitors of small metallic wires after the irradiation. The obtained data at the first irradiation test can strongly be contributed to upgrade the technological basis for the HTGRs, since it is the first direct measurement of the in-core irradiation environments of the HTTR. (author)

Advanced disassembling technique of irradiated driver fuel assembly for continuous irradiation of fuel pins

International Nuclear Information System (INIS)

Ichikawa, Shoichi; Haga, Hiroyuki; Katsuyama, Kozo; Maeda, Koji; Nishinoiri, Kenji

2012-01-01

It was necessary to carry out continuous irradiation tests in order to obtain the irradiation data of high burn-up fuel and high neutron dose material for FaCT (Fast Reactor Cycle Technology Development) project. There, the disassembling technique of an irradiated fuel assembly was advanced in order to realize further continuous irradiation tests. Although the conventional disassembling technique had been cutting a lower end-plug of a fuel pin needed to fix fuel pins to an irradiation vehicle, the advanced disassembling technique did not need cutting a lower end-plug. As a result, it was possible to supply many irradiated fuel pins to various continuous irradiation tests for FaCT project. (author)

Food irradiation: Activities and potentialities

Science.gov (United States)

Doellstaedt, R.; Huebner, G.

After the acceptance of food irradiation up to an overall average dose of 10 kGy recommended by the Joint FAO/IAEA/WHO Expert Committee on the Wholesomeness of Irradiated Food in October 1980, the G.D.R. started a programme for the development of techniques for food irradiation. A special onion irradiator was designed and built as a pilot plant for studying technological and economic parameters of the irradiation of onions. The new principle of bulk-cargo irradiation allows the integration of this technology into the usual harvest technology for onions on the way from field to storage. Scientific and applied research work has been carried out in the past 3 yr on the irradiation of spices, potatoes, eviscerated chicken, animal feeds, fodder yeast, drugs and vaccines. In connection with the irradiation of eviscerated chicken, fodder yeast and animal feeds the basis of an antisalmonella programme has been discussed. Germ-count-reduced spices were employed for the production of test charges of preserves and tinned products. The results have led to the decision to design and build a new multipurpose irradiator for food irradiation. In order to cover the legal aspects of food irradiation the Ministry of Health issued regulations concerning the recommendation of irradiated food in the G.D.R.

STUDIES CONCERNING THE EFFECT OF GAMMA RADIATION AND MAGNETIC FIELD EXPOSURE ON GLADIOLUS

Directory of Open Access Journals (Sweden)

M CANTOR

2003-04-01

Full Text Available Gladiolus (Gladiolus sp. is one of the most floral species cultivated over in the world and in Romania. There are many studies concerning the effect of gamma radiation on ornamental plants but little is known about the synergetic effect of gamma radiation and exposure to magnetic fields on Gladiolus. In our investigation we have tested the effect of gamma irradiation and magnetic field exposure of gladiolus corms and cormels of the cultivars: Her Majesty, Applause and Speranţa. The corms and cormels were irradiated for 72 hrs with 137 Cs gamma source on cylindrical exposure geometry. At medium dose of 1 Gy has been accumulated for each corm and cormel. For each variety we used 10 corms and 30 cormels in five variants. The comportment of various varieties was evaluated by recording the following characteristics: length of roots and growth tip. Significant effect was obtained at the variants which was irradiated with 1 Gy gamma radiation and 3 Gauss magnetic fields.

Food Irradiation in Japan

Energy Technology Data Exchange (ETDEWEB)

Kawabata, T.

1981-09-15

Since 1967 research activities on food irradiation in Japan have been carried out under the National Food Irradiation Programme by the Japanese Atomic Energy Commission. The programme has been concentrated on the technological and economical feasibility and wholesomeness testings of seven irradiated food items of economic importance to the country, i.e. potatoes, onions, wheat, rice, 'kamaboko' (fish-paste products), 'Vienna' sausages and mandarin oranges. By now most studies, including wholesomeness testings of these irradiated food items, have been completed. In Japan, all foods or food additives for sale are regulated by the Food Sanitation Law enforced in 1947. Based on studies made by the national programme, irradiated potatoes were given 'unconditional acceptance' for human consumption in 1972. At present, irradiated potatoes are the only food item which has so far been approved by the Minister of Health and Welfare. Unless the Minister of Health and Welfare has declared that items are not harmful to human health on obtaining comments from the Food Sanitation Investigation Council, no irradiated food can be processed or sold. In addition, the import of irradiated foodstuffs other than potatoes from foreign countries is prohibited by law.

Irradiated foods and allergy. From a perspective of irradiation chemistry of proteins

International Nuclear Information System (INIS)

Miyahara, Makoto

2003-01-01

A change of protein in irradiated food has been known. There are a few reports on change of allergy of irradiated foods. Two kinds of allergy such as the immediate allergy (I type) and delayed allergy (IV type) are taken ill by foods. I type is related to irradiated foods. Allergen enters body through digestive tract. Anti body (IgE) is protein with from 10,000 to 100,000 molecular weight. Allergic disease is originated mainly by egg, milk, wheat, buckwheat, peanut and shrimp. When food is irradiated, the proteins are decomposed and produced higher and lower molecular compounds at the same time. Change of the viscosity and the sedimentation coefficient and deactivation of enzymes of β-lactoglobulin, cow albumin, egg albumin and casein were investigated. There is no report of increasing allergy by irradiation. However, some paper indicated that immunogenicity of protein was decreased by irradiation. (S.Y.)

Development of food irradiation technology and consumer attitude toward irradiated food in Korea

International Nuclear Information System (INIS)

Kwon, Joong-Ho; Byun, Myung-Woo; Cho, Han-Ok

1992-01-01

In Korea, the well-integrated research of biological effects of radiation has been launched from the late 1960s. As research activities, the following food items have been dealt with: sprouting foods, fruits, mushrooms, grains, spices or mixed condiments, fish or fishery products, meat or meat products, and fermented foods. The usage of gamma radiation from 60 Co source is now authorized for food irradiation of the following items: potato, onion, garlic, chestnut, mushroom, dried mushroom, dried spices (including red pepper, garlic, black pepper, onion, ginger, and green onion), dried meat, powdered fish and shellfish, soybean paste powder, hot pepper paste powder, soybean sauce powder, and starch. Since the authorization of food irradiation in 1985, consumers' acceptance has been considered the most important. The survey evaluating the basic perception and attitule toward food irradiation revealed the following results. Consumers' awareness of food irradiation was 82%, with significantly higher in radiation workers than the general public (p<0.0001). Seventy-five percent distinguished the contaminated food by radionuclides from irradiated food. In purchasing irradiated foods, 50.9% required more information. The contribution of irradiated foods to wholesomeness was suspicious in 51%, acceptable in 33%, and uncertain in 16%. If information about the benefits of irradiation is provided to consumers, positive response was increased to 60%. The most critical impediment in the commercial application of food irradiation was found to have resulted from the general consumers' slow acceptance; however, consumers' attitude to irradiated food became positive if they understood the safety and advantages of this technology. The most important task is to overcome consumers' psychological resistance and transporting matters of the products to be irradiated. (N.K.)

Development of detection methods for irradiated foods; development of immunological identification of irradiated foods

Energy Technology Data Exchange (ETDEWEB)

Lee, Kyong Ae; Lee, Yoon Jin; Choi, Yoon Jung; Han, Su Kyong [Soonchunhyang University, Asan (Korea)

2002-04-01

Enzyme-linked Immunosorbent assay systems for the identification of irradiated egg, pork and chicken was developed. Eggs were irradiated in their shells to 0.5{approx}7kGy. Pork was irradiated to 0.5{approx}3kGy and chicken irradiated to 0.5kGy{approx}5kGy. The most sensitive proteins to irradiation were screened by SDS-PAGE and purified. Ovalbumin from egg, salt soluble protein(p) from pork, and salt soluble protein(c) from chicken showed the most sensitivity to irradiation. To investigate for a practical use in identifying of irradiated egg, pork and chicken, competitive ELISA was performed. The binding activity of ovalbumin to anti-ovalbumin IgG was reduced in a dose-dependent manner by irradiating up to 7kGy, and considerably lowered after irradiating at 7kGy. The concentration of 50% inhibition of ovalbumin to IgG was increased to 1.5(0.5kGy){approx}3.7(7kGy) times in an dose-dependent relationship. The binding activity of salt soluble protein(p) to anti-salt soluble protein IgG (anti-SSPp IgG)was also reduced in a dose-dependent manner by irradiating up to 3kGy, and considerably lowered after irradiating at 3kGy. The concentration of 50% inhibition of salt soluble protein to IgG was increased to 1.1(0.5kGy){approx}5.2(3kGy) times in a dose-dependent relationship. On the other hand, the binding activity of salt soluble protein(c) to anti-salt soluble protein IgG(anti-SSPc IgG) was reduced in a dose-dependent manner by irradiating up to 5kGy, too, and considerably lowered after irradiating at 5kGy. The concentration of 50% inhibition of salt soluble protein to IgG was increased to 1.1{approx}2.3 times in a dose-dependent relationship. SDS-PAGE of the irradiation sensitive proteins showed the partial breakdown of it was induced by irradiation. So, the lowering of binding activity was probably due to the partial breakdown of ovalbumin by irradiation. 25 refs., 12 figs., 5 tabs. (Author)

Irradiation of onions with the commercial potato irradiator

International Nuclear Information System (INIS)

Aoki, Shohei; Kawashima, Koji; Hayasi, Toru

1983-01-01

Three varieties of onion harvested in Hokkaido were irradiated with the Shohoro Potato Irradiator on 29th September, 1981. One ton of each of the varieties, Kitamiki (KI), Ohohtsuku (OH) and Furanui (FU), was used in this investigation. Onions had longer dormancy period in the order of FU>OH>KI. Higher sprouting percentage was obtained in the unirradiated onions, while they were stored at a higher temperature or stored for a longer period. Generally, unirradiated onions sprouted before they were deteriorated. Thus the number of deteriorated bulbs in the unirradiated onions was superficially less than that in the irradiated ones. When the onions which were taken from warehouses on 26th March, 1982 were stored at room temperature, the percentage of wholesome bulbs was higher in KI and OH than FU. Small buds in some of the irradiated onions turned dark after a long storage time. Quantitative estimation of this phenomena is left to be resolved. There was little relationship between the weight loss and the number of wholesome onions. (author)

Irradiation of goods

International Nuclear Information System (INIS)

Lunt, R.E.

1987-01-01

Mechanical handling apparatus is adapted to handle goods, such as boxed fruit, during a process of irradiation, in palletized form. Palletized goods are loaded onto wheeled vehicles in a loading zone. Four vehicles are wheeled on a track into an irradiation zone via a door in a concrete shield. The vehicles are arranged in orthogonal relationship around a source of square section. Turntables are positioned at corners of the square shaped rail truck around the source selectively to turn the vehicles to align then with track sections. Mechanical manipulating devices are positioned in the track sections opposed to sides of the source. During irradiation, the vehicles and their palletized goods are cylically moved toward the source to offer first sides of the goods for irradiation and are retraced from the source and are pivoted through 90 0 to persent succeeding sides of the goods for irradiation

Chemical changes after irradiation and post-irradiation storage in tilapia and Spanish mackerel

International Nuclear Information System (INIS)

Al-Kahtani, H.A.; Abu-Tarboush, H.M.; Bajaber, A.S.; Atia, M.; Abou-Arab, A.A.; El-Mojaddidi, M.A.

1996-01-01

Influence of gamma irradiation (1.5-10 kGy) and post-irradiation storage up to 20 days at 2 +/- 2 degrees C on some chemical criteria of tilapia and spanish mackerel were studied. Total volatile basic nitrogen formation was lower in irradiated fish than in the unirradiated. Irradiation also caused a larger increase in thiobarbituric acid values which continued gradually during storage. Some fatty acids decreased by irradiation treatments at all doses. Thiamin loss was more severe at higher doses (greater than or equal to 4.5 kGy), whereas riboflavin was not affected. Alpha and gamma tocopherols of tilapia and alpha, beta, gamma, and delta tocopherols, in Spanish mackerel, decreased with increased dose and continued to decrease during 20-day post-irradiation storage

New facility for post irradiation examination of neutron irradiated beryllium

International Nuclear Information System (INIS)

Ishitsuka, Etsuo; Kawamura, Hiroshi

1995-01-01

Beryllium is expected as a neutron multiplier and plasma facing materials in the fusion reactor, and the neutron irradiation data on properties of beryllium up to 800 degrees C need for the engineering design. The acquisition of data on the tritium behavior, swelling, thermal and mechanical properties are first priority in ITER design. Facility for the post irradiation examination of neutron irradiated beryllium was constructed in the hot laboratory of Japan Materials Testing Reactor to get the engineering design data mentioned above. This facility consist of the four glove boxes, dry air supplier, tritium monitoring and removal system, storage box of neutron irradiated samples. Beryllium handling are restricted by the amount of tritium;7.4 GBq/day and 60 Co;7.4 MBq/day

Gamma irradiation devices

International Nuclear Information System (INIS)

Foeldiak, Gabor; Stenger, Vilmos.

1983-01-01

The main parameters and the preparation procedures of the gamma radiation sources frequently applied for irradiation purposes are discussed. In addition to 60 Co and 137 Cs sources also the nuclear power plants offer further opportunities: spent fuel elements and products of certain (n,γ) reactions can serve as irradiation sources. Laboratory scale equipments, pilot plant facilities for batch or continuous operation, continuous industrial irradiators and special multipurpose, mobile and panorama type facilities are reviewed including those in Canada, USA, India, the Soviet Union, Hungary, UK, Japan and Australia. For irradiator design the source geometry dependence of the spatial distribution of dose rates can be calculated. (V.N.)

Parametric relationships for gamma dose and irradiation homogeneity in a sewage sludge irradiator

International Nuclear Information System (INIS)

Krishnamurthy, K.

1986-01-01

A study on the inter-relationships between factors governing γ dose and irradiation homogeneity in a sewage sludge irradiator is presented here. The analysis involves a 60 Co irradiator of cylindrical irradiation geometry with batchwise operation for hygienisation of liquid sludge. The influence of the parameters such as the source-target geometry, strength of 60 Co sources in the irradiator, hygienisation dose and rheological and hydraulic characteristics of sewage sludge on the selection of the three critical factors viz. the pumping rate (P) required to maintain turbulent flow regime in the irradiation zone; the mininum re-circulation time (Tsub(m)) essential to achieve a certain degree of homogeneity of dose absorption in the fluid; and the irradiation time (Tsub(i)) required to impart the necessary dose for the desired hygienisation effect in the sludge has been discussed in detail and inter-relationships among these three factors have been worked out. The applicability of the relationships to a typical operating plant has also been elucidated. (author)

Food irradiation - now

International Nuclear Information System (INIS)

Basson, R.A.

1989-01-01

Food irradiation technology in South Africa is about to take its rightful place next to existing food preservation methods in protecting food supplies. This is as a result of several factors, the most important of which is the decision by the Department of Health and Population Development to introduce compulsory labelling of food irradiation. The factors influencing food irradiation technology in South Africa are discussed

Facts about food irradiation: Irradiation and food safety

International Nuclear Information System (INIS)

1991-01-01

This fact sheet focusses on the question of whether irradiation can be used to make spoiled food good. No food processing procedures can substitute for good hygienic practices, and good manufacturing practices must be followed in the preparation of food whether or not the food is intended for further processing by irradiation or any other means. 3 refs

Irradiated film material and method of the irradiation

International Nuclear Information System (INIS)

1978-01-01

The irradiation of polymer film material is a strengthening procedure. To obtain a substantial uniformity in the radiation dosage profile, the film is irradiated in a trough having lateral deflection blocks adjacent to the film edges. These deflect the electrons towards the surface of the trough bottom for further deflection towards the film edge. (C.F.)

Quantification de la Charge Virale et tests de résistance du VIH-1 aux ARV à partir d’échantillons DBS (Dried Blood Spots chez des patients Guinéens sous traitement antirétroviral

Directory of Open Access Journals (Sweden)

Nestor Bangoura

2015-06-01

Full Text Available Problématique: Comme dans plusieurs pays du Sud, le suivi virologique des patients sous traitement antirétroviral (TARV en Guinée est timide voire inexistant dans certaines localités. Le but de cette étude était d’évaluer la faisabilité technique et logistique de l’utilisation des DBS dans les tests de charge virale (CV et de génotypage. Méthode: De septembre à octobre 2010, les DBS ont été préparés à partir de prélèvements sanguins de patients adultes sous TARV. Le délai d’envoi des échantillons au laboratoire de référence était de 30 jours maximum après le prélèvement et se faisait à température ambiante. La CV a été quantifiée et les échantillons de patients en échec virologique (CV ≥ 3 log10 copies/mL ont été génotypés selon le protocole de l’ANRS. L’algorithme de Stanford version 6.0.8 a été utilisé pour l’analyse et l’interprétation des mutations de résistance. Résultats: Parmi les 136 patients inclus, 129 et 7 étaient respectivement sous première et deuxième ligne de traitement avec une médiane de suivi de 35 mois [IQR: 6-108]. L’échec virologique a été noté chez 33 patients. Parmi eux, 84.8% (n = 28/33 ont bénéficié d’ungénotypage. Le taux de résistance global était de 14% (n = 19/136. Le CRF02_AG était le sous type viral le plus prévalent (82%; n = 23. Conclusion: En plus de montrer la faisabilité technique et logistique des tests de CV et de génotypage à partir des DBS, ces résultats montrent l’intérêt de leurs utilisations dans le suivi virologique des patients sous TARV. Cette étude a permis également de documenter l’échec virologique, la résistance aux ARV et la diversité génétique du VIH-1 en Guinée. Mots clés: VIH-1, Résistance aux ARV, DBS (Dried Blood Spots, Guinée Conakry, Génotypage,Charge Virale.   Quantification of Viral load and resistance tests of HIV-1 to ARVs from dried blood spotssamples in Guinean patients undergoing

Food irradiation and consumer values

International Nuclear Information System (INIS)

Bruhn, C.M.; Schutz, H.G.; Sommer, R.

1988-01-01

A mail survey technique was used to determine if value hierarchy, locus of control, innovativeness, and demographic parameters could distinguish between subjects expressing different levels of concern and willingness to buy irradiated food. Concern toward irradiated food was lower than concern for other food safety issues, probably because many expressed uncertainty regarding irradiation. Those ranking the value “an ecologically balanced world” expressed the greatest irradiation concern. Factors which could predict high irradiation concern were being highly concerned about the use of chemical sprays on food, completing more formal education and being female; those believing that life was controlled by luck were less concerned. Irradiation concern was a principal factor determining willingness to buy irradiated foods. Innovative consumers were more likely to try irradiated foods than noninnovative. Implications for consumer education are presented

Irradiation, annealing, and reirradiation research in the ORNL heavy-section steel irradiation program

International Nuclear Information System (INIS)

Nanstad, R.K.; Iskander, S.K.; McCabe, D.E.; Sokolov, M.A.

1997-01-01

One of the options to mitigate the effects of irradiation on reactor pressure vessels (RPV) is to thermally anneal them to restore the toughness properties that have been degraded by neutron irradiation. This paper summarizes experimental results from work performed as part of the Heavy-Section Steel Irradiation (HSSI) Program managed by Oak Ridge National Laboratory (ORNL) for the U.S. Nuclear Regulatory Commission. The HSSI Program focuses on annealing and re-embrittlement response of materials which are representative of those in commercial RPVs and which are considered to be radiation-sensitive. Experimental studies include (1) the annealing of materials in the existing inventory of previously irradiated materials, (2) reirradiation of previously irradiated/annealed materials in a collaborative program with the University of California, Santa Barbara (UCSB), (3) irradiation/annealing/reirradiation of U.S. and Russian materials in a cooperative program with the Russian Research Center-Kurchatov Institute (RRC-KI), (4) the design and fabrication of an irradiation/anneal/reirradiation capsule and facility for operation at the University of Michigan Ford Reactor, (5) the investigation of potential for irradiation-and/or thermal-induced temper embrittlement in heat-affected zones (HAZs) of RPV steels due to phosphorous segregation at grain boundaries, and (6) investigation of the relationship between Charpy impact toughness and fracture toughness under all conditions of irradiation, annealing, and reirradiation

Food irradiation makes progress

International Nuclear Information System (INIS)

Kooij, J. van

1984-01-01

In the past fifteen years, food irradiation processing policies and programmes have been developed both by a number of individual countries, and through projects supported by FAO, IAEA and WHO. These aim at achieving general acceptance and practical implementation of food irradiation through rigorous investigations of its wholesomeness, technological and economic feasibility, and efforts to achieve the unimpeded movement of irradiated foods in international trade. Food irradiation processing has many uses

KEY RESULTS FROM IRRADIATION AND POST-IRRADIATION EXAMINATION OF AGR-1 UCO TRISO FUEL

Energy Technology Data Exchange (ETDEWEB)

Demkowicz, Paul A.; Hunn, John D.; Petti, David A.; Morris, Robert N.

2016-11-01

The AGR-1 irradiation experiment was performed as the first test of tristructural isotropic (TRISO) fuel in the US Advanced Gas Reactor Fuel Development and Qualification Program. The experiment consisted of 72 right cylinder fuel compacts containing approximately 3×105 coated fuel particles with uranium oxide/uranium carbide (UCO) fuel kernels. The fuel was irradiated in the Advanced Test Reactor for a total of 620 effective full power days. Fuel burnup ranged from 11.3 to 19.6% fissions per initial metal atom and time average, volume average irradiation temperatures of the individual compacts ranged from 955 to 1136°C. This paper focuses on key results from the irradiation and post-irradiation examination, which revealed a robust fuel with excellent performance characteristics under the conditions tested and have significantly improved the understanding of UCO coated particle fuel irradiation behavior within the US program. The fuel exhibited a very low incidence of TRISO coating failure during irradiation and post-irradiation safety testing at temperatures up to 1800°C. Advanced PIE methods have allowed particles with SiC coating failure to be isolated and meticulously examined, which has elucidated the specific causes of SiC failure in these specimens. The level of fission product release from the fuel during irradiation and post-irradiation safety testing has been studied in detail. Results indicated very low release of krypton and cesium through intact SiC and modest release of europium and strontium, while also confirming the potential for significant silver release through the coatings depending on irradiation conditions. Focused study of fission products within the coating layers of irradiated particles down to nanometer length scales has provided new insights into fission product transport through the coating layers and the role various fission products may have on coating integrity. The broader implications of these results and the application of

Reactivation of UV- and γ-irradiated herpes virus in UV- and X-irradiated CV-1 cells

International Nuclear Information System (INIS)

Takimoto, K.; Niwa, O.; Sugahara, T.

1982-01-01

Enhanced reactivation of UV- and γ-irradiated herpes virus was investigated by the plaque assay on CV-1 monkey kidney monolayer cells irradiated with UV light or X-rays. Both UV- and X-irradiated CV-1 cells showed enhancement of survival of UV-irradiated virus, while little or no enhancement was detected for γ-irradiated virus assayed on UV- or X-irradiated cells. The enhanced reactivation of UV-irradiated virus was greater when virus infection was delayed 24 or 48 h, than for infection immediately following the irradiation of cells. Thus the UV- or X-irradiated CV-1 cells are able to enhance the repair of UV damaged herpes virus DNA, but not of γ-ray damaged ones. (author)

Ingestion and digestion of erythrocytes by non-irradiated and irradiated macrophages

Energy Technology Data Exchange (ETDEWEB)

Vorbrodt, A; Grabska, A; Krzyzowska-Gruca, S; Gruca, S

1975-01-01

The effect of x rays (1300 R) and gamma irradiation (3000 R) on phagocytic activity of mouse peritoneal macrophages cultivated in vitro was studied using human glutaraldehyde-fixed red blood cells. The peroxidative activity of haemoglobin was cytochemically detected by the DAB method. The obtained results indicate that the applied dose of x irradiation does not affect the phagocytic activity of macrophages. On the contrary, the gamma irradiation (3000 R) causes acceleration of phagocytic activity of macrophages with concomitant impairment of intracellular digestion of ingested material. Weakened cytochemical reaction for acid phosphatase suggests that sufficiently high doses of irradiation cause some disturbances in the biosynthesis of lysosomal enzymes in exposed macrophages.

Irradiation behavior evaluation of oxide dispersion strengthened ferritic steel cladding tubes irradiated in JOYO

Energy Technology Data Exchange (ETDEWEB)

Yamashita, Shinichiro, E-mail: yamashita.shinichiro@jaea.go.jp; Yano, Yasuhide; Ohtsuka, Satoshi; Yoshitake, Tsunemitsu; Kaito, Takeji; Koyama, Shin-ichi; Tanaka, Kenya

2013-11-15

Irradiation behavior of ODS steel cladding tubes was evaluated for the further progress in understanding of the neutron-irradiation effects on ODS steel. Two types of ODS (9Cr–ODS{sub F}/M, 12Cr–ODS{sub F}) steel cladding tubes with differences in basic compositions and matrix phases were irradiated in JOYO. Post-irradiation examination data concerning hardness, ring tensile property, and microstructure were obtained. Hardness measurement after irradiation showed that there was an apparent irradiation temperature dependence on hardness for 9Cr–ODS{sub F}/M steel whereas no distinct temperature dependence for 12Cr–ODS{sub F} steel. Also, there was no significant change in tensile strengths after irradiation below 923 K, but those above 1023 K up to 6.6 × 10{sup 26} n/m{sup 2} (E > 0.1 MeV) were decreased by about 20%. TEM observations showed that the radiation-induced defect cluster formation during irradiation was suppressed because of high density sink site for defect such as initially-existed dislocation, and precipitate interfaces. In addition, oxide particles were stable up to the maximum doses of this irradiation test.

Effects of sous-vide method at different temperatures, times and vacuum degrees on the quality, structural, and microbiological properties of pork ham.

Science.gov (United States)

Jeong, Kiyoung; O, Hyeonbin; Shin, So Yeon; Kim, Young-Soon

2018-04-10

This study evaluated the influence of different factors on pork hams cooked by sous-vide method. The quality and structural and microbiological properties of the treated samples were compared with those of controls. Samples were subjected to treatment at different combinations of temperature (61 °C or 71 °C), time (45 or 90 min), and vacuum degree (98.81% or 96.58%). The control sample was air packaged and boiled for 45 min in boiling water. Temperature and vacuum degree affected quality properties, while the effect of time was limited. Samples cooked at 61 °C showed higher moisture content, redness, and pink color of the meat juice, whereas samples cooked at 71 °C showed higher cooking loss rate, lightness, and volatile basic nitrogen values. Texture analysis indicated tenderer meat for the treatment group than the control. No microbial growth was detected in any treatment groups. Meat cooked at 61 °C and 98.81% vacuum showed more spacious arrangement of meat fiber. Copyright © 2018 Elsevier Ltd. All rights reserved.

Sous-produits de la désinfection dans l'eau potable des petits réseaux municipaux: variabilité spatio-temporelle, modélisation et stratégies de suivi

OpenAIRE

Guilherme, Stéphanie

2014-01-01

Les trihalométhanes (THM) et les acides haloacétiques (AHA) constituent les seules familles réglementées de sous-produits de la désinfection (SPD). Les SPD sont des composés issus de la réaction de la matière organique naturelle présente dans l’eau et du désinfectant lors du traitement de l’eau potable. La plupart de ces composés ne sont pas réglementés, même si plusieurs études ont montré que certains SPD peuvent présenter un risque toxicologique plus important que les THM et les AHA. De nos...

Effect of irradiation spectrum on the microstructure of ion-irradiated Al2O3

International Nuclear Information System (INIS)

Zinkle, S.J.

1994-01-01

Polycrystalline samples of alpha-alumina have been irradiated with various ions ranging from 3.6 MeV Fe + to 1 MeV H + ions at 650 C. Cross-section transmission electron microscopy was used to investigate the depth-dependent microstructure of the irradiated specimens. The microstructure following irradiation was observed to be dependent on the irradiation spectrum. In particular, defect cluster nucleation was effectively suppressed in specimens irradiated with light ions such as 1 MeV H + ions. On the other hand, light ion irradiation tended to accelerate the growth rate of dislocation loops. The microstructural observations are discussed in terms of ionization enhanced diffusion processes

Le comportement des audités: quel effet sur la qualité de service rendu par les cabinets d’audit au Cameroun ?

Directory of Open Access Journals (Sweden)

Léopold Djoutsa Wamba

2014-09-01

Full Text Available La présente étude a pour ambition de vérifier s’il existe un lien empirique entre le comportement des audités et la qualité de l’audit au Cameroun. Nous avons à cet effet appréhendé la qualité de l’audit via les qualités de l’auditeur (sa compétence et son indépendance. En s’appuyant sur les analyses de classification et économétriques par la méthode de régression logistique sur des données recueillies par questionnaire auprès de 40 cabinets d’audits présents au Cameroun, les résultats montrent d’une part que la qualité de l’audit est plutôt altérée dans notre contexte. D’autre part, cette étude relève que la probabilité d’avoir un audit de qualité est d’autant plus grande lorsque les honoraires sont négociés à la hausse permanemment et, d’autant plus faible, si l’audité est absent lors du déroulement de la mission, ou s’il accuse des retards dans le paiement des honoraires ou encore, lorsqu’il n’a pas fourni à temps tous les documents nécessaires pour mener à bien la mission.

Alloys under irradiation

International Nuclear Information System (INIS)

Martin, G.; Bellon, P.; Soisson, F.

1997-01-01

During the last two decades, some effort has been devoted to establishing a phenomenology for alloys under irradiation. Theoretically, the effects of the defect supersaturation, sustained defect fluxes and ballistic mixing on solid solubility under irradiation can now be formulated in a unified manner, at least for the most simple cases: coherent phase transformations and nearest-neighbor ballistic jumps. Even under such restrictive conditions, several intriguing features documented experimentally can be rationalized, sometimes in a quantitative manner and simple qualitative rules for alloy stability as a function of irradiation conditions can be formulated. A quasi-thermodynamic formalism can be proposed for alloys under irradiation. However, this point of view has limits illustrated by recent computer simulations. (orig.)

Preliminary irradiation test results from the Yankee Atomic Electric Company reactor vessel test irradiation program

International Nuclear Information System (INIS)

Biemiller, E.C.; Fyfitch, S.; Campbell, C.A.

1993-01-01

The Yankee Atomic Electric Company test irradiation program was implemented to characterize the irradiation response of representative Yankee Rowe reactor vessel beltline plate materials and to remove uncertainties in the analysis of existing irradiation data on the Yankee Rowe reactor vessel steel. Plate materials each containing 0.24 w/o copper, but different nickel contents at 0.63 w/o and 0.19 w/o, were heat treated to simulate the Yankee vessel heat treatment (austenitized at 1800 deg F) and to simulate Regulatory Guide 1.99 database materials (austenitized at 1600 deg. F). These heat treatments produced different microstructures so the effect of microstructure on irradiation damage sensitivity could be tested. Because the nickel content of the test plates varied and the copper level was constant, the effect of nickel on irradiation embrittlement was also tested. Correlation monitor material, HSST-02, was included in the program to benchmark the Ford Nuclear Reactor (U. of Michigan Test Reactor) which had never been used for this type of irradiation program. Materials taken from plate surface locations (vs. 1/4T) were included to test whether or not the improved toughness properties of the plate surface layer, resulting from the rapid quench, is maintained after irradiation. If the improved properties are maintained, pressurized thermal shock calculations could utilize this margin. Finally, for one experiment, irradiations were conducted at two irradiation temperatures (500 deg. F and 550 deg. F) to determine the effect of irradiation temperature on embrittlement. The preliminary results of the irradiation program show an increase in T 30 shift of 69 deg. F for a decrease in irradiation temperature of 50 deg. F. The results suggest that for nickel bearing steels, the superior toughness of plate surface material is maintained after irradiation and for the copper content tested, nickel had no apparent effect on irradiation response. No apparent microstructure

Some physical properties of irradiated and non-irradiated oxide glasses containing uranium

International Nuclear Information System (INIS)

Simon, V.; Ardelean, I.; Simon, S.; Cozar, O.; Milea, I.; Lupsa, I.; Mih, V.

1995-01-01

The x U O 3 (1-x) [2 P 2 O 5 · Na 2 O] non-irradiated and gamma irradiated glasses (0 3+ , U 4+ and U 5+ ions. The gamma irradiation induces paramagnetic defects around the glass network forming sites occupied by phosphorous atoms. The non-irradiated samples are weak paramagnetic up to x = 0.1. For higher U O 3 concentration (0.1 < x ≤ 0.2) the magnetic measurements indicated a larger number of paramagnetic ions which are magnetically isolated and exhibit a Curie type behaviour. (author) 5 figs., 14 refs

The behaviour of some polyatomic gases in nuclear reactors; Le comportement de quelques gaz polyatomiques dans les reacteurs nucleaires

Energy Technology Data Exchange (ETDEWEB)

Dolle, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

The chemical effect of ionizing radiations on a certain number of gaseous systems is described. Under the influence of radiations from a reactor, NH{sub 3}, is decomposed to nitrogen and hydrogen in stoichiometric proportions. Formation of N{sub 2}H{sub 3}, particularly could not be detected. Under a slow neutron flux the reaction {sup 14}N (n, p) {sup 14}C constitutes the main source of decomposition energy. Direct recombination of H, and N, has been brought about under the influence of radiation. The radiolysis of NH{sub 3}, occurs by a complex mechanism; and the kinetics follow a law of the order of about 2.5 which increases with the decomposition rate. The decomposition of hydrogen sulphide is appreciably faster than that of NH{sub 3}. Hydrogen is the only gaseous product of the reaction. The sulphur, which is deposited on the walls of the ampoules, is clearly visible to the naked eye. Up to the present decompositions up to 84 per cent have been obtained. The influence of the reaction {sup 32}S (n, p) {sup 32}P is considered. Radiochemical decomposition of nitrous oxide N{sub 2}O takes place with high yields. The reaction is complicated from the beginning by the formation of higher oxides of nitrogen which we identify and measure. Radiochemical decomposition of methane gives quantities of higher hydrocarbons. Certain of these gaseous systems could find applications in the measurement of high doses of radiation. This problem is discussed in the conclusion. (author)Fren. [French] L'effet chimique des rayonnements ionisants sur un certain nombre de systemes gazeux est decrit. Sous l'influence des rayonnements d'un reacteur, NH{sub 3} se decompose en azote et hydrogene en proportions stoechiometriques. En particulier aucune formation de N{sub 2}H{sub 4}, n'a pu etre detectee. Sous flux de neutrons lents, la reaction {sup 14}N (n, p){sup 14}C constitue la principale source d'energie de decomposition. La recombinaison directe de H{sub 2} et N{sub 2} a ete realisous l

Market Trials of Irradiated Spices

International Nuclear Information System (INIS)

Charoen, Saovapong; Eemsiri, Jaruratana; Sajjabut, Surasak

2009-07-01

Full text: The objectives of the experiment were to disseminate irradiated retail foods to the domestic publics and to test consumer acceptance on irradiated ground chilli and ground pepper. Market trials of irradiated ground chilli and ground pepper were carried out at 2 local markets and 4 in Bangkok and Nontaburi in 2005-2007. Before the start of the experiment, processing room, gamma irradiation room and labels of the products were approved by Food and Drug Administration, Thailand. 50 grams of irradiated products were packaged in plastic bags for the market trials. 688 and 738 bags of ground chilli and ground pepper were sold, respectively. Questionnaires distributed with the products were commented by 59 consumers and statistically analyzed by experimental data pass program. 88.1 and 91.4 percents of the consumers were satisfied with the quality and the price, respectively. 79.7% of the consumers chose to buy irradiated ground chilli and ground pepper because they believed that the quality of irradiated products were better than that of non-irradiated ones. 91.5% of the consumers would certainly buy irradiated chilli and pepper again. Through these market trials, it was found that all of the products were sold out and the majority of the consumers who returned the questionnaires was satisfied with the irradiated ground chilli and ground pepper and also had good attitude toward irradiated foods

Irradiation of meat products, chicken and use of irradiated spices for sausages

International Nuclear Information System (INIS)

Kiss, I.F.; Beczner, J.; Zachariev, Gy.; Kovacs, S.

1990-01-01

The shelf-life of packed minced meat has been increased at least threefold at 4 0 C by applying a 2 kGy dose. Results have been confirmed by detailed quantitative microbiological examinations. Sensory evaluations show no significant difference between the unirradiated and irradiated samples. The optimal average dose was 4 kGy for packed-frozen chicken. The number of mesophilic aerobic microbes was reduced by 2, that of psychrotolerant by 2-3 and that of Enterobacteriaceae by 3-4 orders of magnitude by 4 kGy. S. aureus and Salmonella could not be detected in the irradiated samples. in 1984-1985 5100 kg irradiated chickens were marketed labelled as radiation treated. Irradiated spices (5 kGy) were used in the production of sausages (heat-treated and non-heat-treated) under industrial conditions. The microbiological contamination of irradiated spices was lower than that of ethylene oxide treated ones. The cell count in products made with irradiated spices was lower than in those made with unirradiated spices. The sausages proved to be of very good quality. In accordance with the permission, products were marketed and because of the low ratio of spices there was no need to declare them as using irradiated spices. (author)

Irradiation of meat products, chicken and use of irradiated spices for sausages

Energy Technology Data Exchange (ETDEWEB)

Kiss, I.F.; Beczner, J.; Zachariev, Gy. (Central Food Research Inst., Budapest (Hungary)); Kovacs, S. (Veterinary and Food Control Centre, Budapest (Hungary))

1990-01-01

The shelf-life of packed minced meat has been increased at least threefold at 4{sup 0}C by applying a 2 kGy dose. Results have been confirmed by detailed quantitative microbiological examinations. Sensory evaluations show no significant difference between the unirradiated and irradiated samples. The optimal average dose was 4 kGy for packed-frozen chicken. The number of mesophilic aerobic microbes was reduced by 2, that of psychrotolerant by 2-3 and that of Enterobacteriaceae by 3-4 orders of magnitude by 4 kGy. S. aureus and Salmonella could not be detected in the irradiated samples. in 1984-1985 5100 kg irradiated chickens were marketed labelled as radiation treated. Irradiated spices (5 kGy) were used in the production of sausages (heat-treated and non-heat-treated) under industrial conditions. The microbiological contamination of irradiated spices was lower than that of ethylene oxide treated ones. The cell count in products made with irradiated spices was lower than in those made with unirradiated spices. The sausages proved to be of very good quality. In accordance with the permission, products were marketed and because of the low ratio of spices there was no need to declare them as using irradiated spices. (author).

Irradiation of meat products, chicken and use of irradiated spices for sausages

Science.gov (United States)

Kiss, I. F.; Beczner, J.; Zachariev, Gy.; Kovács, S.

The shelf-life of packed minced meat has been increased at least threefold at 4°C by applying a 2 kGy dose. Results have been confirmed by detailed quatitative microbiological examinations. Sensory evaluations show no significant difference between the unirradiated samples. The optimal average dose was 4 kGy for packed-frosen chicken. The number of mesophilic aerobic microbes was reduced by 2, that of psychrotolerant by 2-3 and that of Enterbacteriaceae by 3-4 orders of magnitude by 4 kGy. S. aureus and Salmonella could not be detected in the irradiated samples. In sensory evaluations there was no significant difference between untreated and irradiated samples. In 1984-1985 5100 kg irradiated chickens were marketed labelled as radiation treated. Irradiated spices (5 kGy) were used in the production of sausages (heat-treated and non-heat-treated) under industrial conditions. The microbiological contamination of irradiated spices was lower than that of ethylene oxide treated ones. The cell count in products made with irradiated spices was lower than in those made with unirradiated spices. The sausages proved to be of very good quality. In accordance with the permission, products were marketed and because of the low ratio of spices there was no need to declare them as using irradiated spices.

Etude du comportement sous charges laterales des ossatures de beton arme avec murs de remplissage de maconnerie, construites avant les annees 1960

Science.gov (United States)

Lefebvre, Karine

Reinforced concrete structures with unreinforced masonry infills (BMR) are considered vulnerable to earthquakes. Under seismic actions, infills could fail (causing injuries or death) and cause damages to columns. In Quebec and Canada, most of BMR structures have been constructed prior to the introduction of modern seismic design codes raising question on the contribution of the infill to the structure lateral resistance. The aim of this thesis is to improve modelling technique of BMR structures built in Quebec between 1915 and 1960. This type of structures is found in hospitals or schools buildings, which must comply with some post-earthquake functionality requirements. They could also be residential or office buildings. Actually, practicing engineers usually calculate seismic capacity of BMR structures without considering the infill's structural contribution to the lateral resistance. Yet, this contribution should not be omitted. The first part of the thesis investigates the construction techniques and material properties of the old BMR structures in the Province. The results are the material properties (concrete, reinforcing steel, brick, terra cotta tile, and mortar) and the characteristics of the assemblies (wall section, reinforcement details…). The second part of the thesis presents the results of series of parametric analyses to identify among modelling and geometric parameters, which ones are the most influent on the lateral load response (rigidity, fundamental period, normal modes). Linear and modal analyses were performed. The most influent parameters identified are: number of storeys, number of bays, bay's width, soft storey, openings, upper storeys modelized (instead of being replaced by punctual loads) and the modelization technique of infills panels (strut or shell). Nonlinear static analyses have been performed to identify the most influent parameters to be considered for evaluating the lateral resistance, the capacity (load / displacement) and the yielding sequence (beam versus columns versus infills). The identified parameters are the presence of the infills, the openings and the geometric characteristics of the models (number of storeys and number of bays). One important contribution of this work is the development of an equivalent strut model to represent the action of the infill. The model could be easily implemented in standard analysis software. A central axial hinge reproducing the nonlinear behaviour of the masonry is added to the strut element. This model is a hybridization of existing proposals (FEMA and others) with added innovations by the author. It has been validated with experimental and numerical analyses results from literature. An important conclusion of this thesis is that the contribution of infills to lateral load resisting capacities of BMR structures should be considered for structure of more than one storey. Infills can add up to 51 % to bare frame capacity. The National building code requires that the lateral resistance of existing buildings must be at least 60 % of the equivalent static seismic force (V2005). It is concluded that one storey BMR buildings have a sufficient resistance, while three-storeys structures exhibit plastic deformations for loads under 0,6* V2005.

Food irradiation 2009

International Nuclear Information System (INIS)

Narvaiz, Patricia

2009-01-01

Food irradiation principles; its main applications, advantages and limitations; wholesomeness, present activities at Ezeiza Atomic Centre; research coordinated by the International Atomic Energy Agency; capacity building; and some aspects on national and international regulations, standards and commercialization are briefly described. At present 56 countries authorize the consumption of varied irradiated foods; trade is performed in 32 countries, with about 200 irradiation facilities. Argentina pioneered nuclear energy knowledge and applications in Latin America, food irradiation included. A steady growth of food industrial volumes treated in two gamma facilities can be observed. Food industry and producers show interest towards new facilities construction. However, a 15 years standstill in incorporating new approvals in the Argentine Alimentary Code, in spite of consecutive request performed either by CNEA or some food industries restricts, a wider industrial implementation, which constitute a drawback to future regional commercialization in areas such as MERCOSUR, where Brazil since 2000 freely authorize food irradiation. Besides, important chances in international trade with developed countries will be missed, like the high fresh fruits and vegetables requirements United States has in counter-season, leading to convenient sale prices. The Argentine food irradiation facilities have been designed and built in the country. Argentina produces Cobalt-60. These capacities, unusual in the world and particularly in Latin America, should be protected and enhanced. Being the irradiation facilities scarce and concentrated nearby Buenos Aires city, the possibilities of commercial application and even research and development are strongly limited for most of the country regions. (author) [es

Consumer acceptance of irradiated foods

International Nuclear Information System (INIS)

Feenstra, M.H.; Scholten, A.H.

1991-01-01

Although the first experiments on food irradiation were carried out in 1916 in Sweden, food irradiation, is for consumers, a relatively new technology. From the sixties food irradiation has been applied more and more, so that the consumer movement has become alert to this technology. Since then a lot of controversies have arisen in the literature about wholesomeness, safety, effects, etc. Food irradiation is currently permitted on a small scale in about 30 countries; in some countries or states food irradiation has been put under a ban (e.g. Australia, New Zealand, New Jersey). The World Health Organization (WHO) and the Food and Agriculture Organization of the United Nations (FAO) have, however, chosen food irradiation as a safe and sound method for preserving and improving the safety of food. Reactions on the part of the consumer organizations of many countries are however not in favour of or are even opposed to food irradiation. In this chapter consumer acceptance related to technological developments is described, then the convergence of the consumer movement on public opinion and concern on food irradiation is discussed. The need for labelling of irradiated food products is discussed and finally recommendations are given of ways to change consumers attitudes to food irradiation. (author)

Food irradiation development in Japan

International Nuclear Information System (INIS)

Kawabata, T.

1981-01-01

In Japan, the first food irradiation research was carried out on the preservation of fish and fishery products. In 1966, the Atomic Energy Commission of the Japanese Government (JAEC) decided to promote the National Project on Food Irradiation and, in 1967, the Steering Committee on food irradiation research in the Atomic Energy Bureau, Science and Technology Agency, selected the following food items as of economic importance to the country, i.e., potatoes, onions, rice, wheat, ''Vienna'' sausage, ''kamaboko'' (fish meat jelly products) and mandarin oranges. The National Project is expected to finish at the end of the 1981 fiscal year. Based on the studies by the National Project, irradiated potatoes were given ''unconditional acceptance'' for human consumption in 1972. Already in 1973, a commercial potato irradiator was built at Shihoro, Hokkaido. In 1980, the Steering Committee submitted a final report on the effectiveness and wholesomeness studies on irradiated onions to the JAEC. This paper gives a brief explanation of the legal aspects of food irradiation in Japan, and the present status of wholesomeness studies on the seven items of irradiated foods. In addition, topics concerning food irradiation research on ''kamaboko'', especially on the effectiveness and a new detecting method for the irradiation treatment of these products, are outlined. (author)

Mechanical Design and Manufacturing Preparation of Loading Unloading Irradiation Facility in Reflector Irradiation Position

International Nuclear Information System (INIS)

Hasibuan, Djaruddin

2004-01-01

Base on planning to increase of the irradiation service quality in Multi purpose Reactor-GAS, the mechanical design and manufacturing of the (n,γ) irradiation facility has been done. The designed of (n,γ) irradiation facility is a new facility in Multi purpose Reactor-GAS. The design doing by design of stringer, guide bar and hanger. By the design installation, the continuous irradiation service of non fission reaction will be easy to be done without reactor shut down. The design of the facility needs 3 pieces Al pipe by 36 x 1.5 mm, a peace of Al round bar by 80 mm diameter and a piece of Al plate by 20 x 60 x 0.2 mm for the stringer and guide bar manufacturing. By the building of non fission irradiation facility in the reflector irradiation position, will make the irradiation service to be increased. (author)

Irradiation sequels of retinoblastomas. Sequelles de l'irradiation externe des retinoblastomes

Energy Technology Data Exchange (ETDEWEB)

Benk, V; Habrand, J L; Bloch Michel, E; Soussaline, M; Sarrazin, D [Centre de Lutte Contre le Cancer Gustave-Roussy, 94 - Villejuif (France)

1993-01-01

From 1975 to 1985, 34 children with a non-metastatic retinoblastoma were irradiated at the Institut Gustave-Roussy. After enucleation, 19 bilateral tumors were irradiated by two lateral opposed fields and 15 unilateral tumors by one lateral and anterior field, in the case of optic nerve being histologically positive. Dose was 45 Gy, 1.8 Gy per fraction. The 10-year-survival rate for unilateral and bilateral retinoblastomas was 79%. Long term sequels were available for 25 patients: 88% retained one functional eye. Three children with bilateral retinoblastomas developed a cataract in the residual eye between 2 and 5 years after irradiation, none with unilateral tumor. Nine patients (36%), seven with unilateral and two with bilateral tumor developed a cosmetical problem that required multiple surgical rehabilitation between 3 and 14 years after irradiation. Nine children (36%), five with unilateral and four with bilateral tumors developed growth hormone deficit between 2 and 8 years after irradiation that required hormone replacement. Their pituitary gland received 22 to 40 Gy. No osteosarcoma occurred in this population. Among long-term sequels, following irradiation for retinoblastoma, cosmetical deformities represent disabling sequels that could justify new approaches in radiotherapy, as protontherapy combined with 3-D-treatment planning.

Craniospinal Irradiation for Trilateral Retinoblastoma Following Ocular Irradiation

Energy Technology Data Exchange (ETDEWEB)

Marks, Lawrence B.; Bentel, Gunilla; Sherouse, George W.; Spencer, David P.; Light, Kim

2015-01-15

A case study is presented. Craniospinal radiotherapy and a three-field pineal boost for trilateral retinoblastoma were delivered to a patient previously irradiated for ocular retinoblastoma. The availability of CT-based three-dimensional treatment planning provided the capability of identifying the previously irradiated volume as a three-dimensional anatomic structure and of designing a highly customized set of treatment beams that minimized reirradiation of that volume.

Facts about food irradiation: Safety of irradiation facilities

International Nuclear Information System (INIS)

1991-01-01

This fact sheet considers the safety of industrial irradiation facilities. Although there have been accidents, none of them has endangered public health or environmental safety, and the radiation processing industry is considered to have a very good safety record. Gamma irradiators do not produce radioactive waste, and the radiation sources at the facilities cannot explode nor in any other way release radioactivity into the environment. 3 refs

Food irradiation

International Nuclear Information System (INIS)

Mercader, J.P.; Emily Leong

1985-01-01

The paper discusses the need for effective and efficient technologies in improving the food handling system. It defines the basic premises for the development of food handling. The application of food irradiation technology is briefly discussed. The paper points out key considerations for the adoption of food irradiation technology in the ASEAN region (author)

Gamma-irradiation of tomatoes

International Nuclear Information System (INIS)

Tencheva, S.; Todorov, S.

1975-01-01

The influence of gamma-ray on tomatoes picked in a pink-red ripening stage, good for consumption, is studied. For that purpose tomatoes of ''Pioneer 2'' variety packed in perforated 500 g plastic bags were irradiated on a gamma device (Cobalt-60) at a dose power of 1900 rad/min with doses 200 or 300 krad. Samples were stored after irradiation at room temperature (20 - 22sup(o)C). Microbiological studies demonstrated that 44 resp. 99.96 per cent of the initial number of microorganisms was destroyed after irradiation with 200 resp. 300 krad. The time required for the number of microorganisms to be restored was accordingly increased. Irradiation delayed tomato ripening by 4 to 6 days, demonstrable by the reduced content of the basic staining substances - carotene and licopine. Immediately after irradiation the ascorbic acid content was reduced by an average of 13 per cent. After 18 days the amount of ascorbic acid in irradiated tomatoes was increased to a higher than the starting level, this is attributed to reductone formation during irradiation. The elevated total sugar content shown to be invert sugar was due to further tomato ripening. (Ch.K.)

food irradiation: activities and potentialities

International Nuclear Information System (INIS)

Doellstaedt, R.; Huebner, G.

1985-01-01

After the acceptance of food irradiation up to an overall average dose of 10 kGy recommended by the Joint FAO/IAEA/WHO Expert Committee on the Wholesomeness of Irradiated Food in October 1980, the G.D.R. started a programme for the development of techniques for food irradiation. A special onion irradiator was designed and built as a pilot plant for studying technological and economic parameters of the irradiation of onions. (author)

Blood irradiation: Rationale and technique

International Nuclear Information System (INIS)

Lewis, M.C.

1990-01-01

Upon request by the local American Red Cross, the Savannah Regional Center for Cancer Care irradiates whole blood or blood components to prevent post-transfusion graft-versus-host reaction in patients who have severely depressed immune systems. The rationale for blood irradiation, the total absorbed dose, the type of patients who require irradiated blood, and the regulations that apply to irradiated blood are presented. A method of irradiating blood using a linear accelerator is described

Irradiated produce reaches Midwest market

International Nuclear Information System (INIS)

Pszczola, D.E.

1992-01-01

In March 1992, the Chicago-area store gave its shoppers a choice between purchasing irradiated and nonirradiated fruits. The irradiated fruits were treated at Vindicator Inc., the first U.S. food irradiation facility (starting up on January 10, 1992). The plant, located in Mulberry, Fla., then shipped the fruits in trucks to the store where they were displayed under a hand-lettered sign describing the irradiated fruits and showing the irradiation logo

Ion irradiation to simulate neutron irradiation in model graphites: Consequences for nuclear graphite

Science.gov (United States)

Galy, N.; Toulhoat, N.; Moncoffre, N.; Pipon, Y.; Bérerd, N.; Ammar, M. R.; Simon, P.; Deldicque, D.; Sainsot, P.

2017-10-01

Due to its excellent moderator and reflector qualities, graphite was used in CO2-cooled nuclear reactors such as UNGG (Uranium Naturel-Graphite-Gaz). Neutron irradiation of graphite resulted in the production of 14C which is a key issue radionuclide for the management of the irradiated graphite waste. In order to elucidate the impact of neutron irradiation on 14C behavior, we carried out a systematic investigation of irradiation and its synergistic effects with temperature in Highly Oriented Pyrolitic Graphite (HOPG) model graphite used to simulate the coke grains of nuclear graphite. We used 13C implantation in order to simulate 14C displaced from its original structural site through recoil. The collision of the impinging neutrons with the graphite matrix carbon atoms induces mainly ballistic damage. However, a part of the recoil carbon atom energy is also transferred to the graphite lattice through electronic excitation. The effects of the different irradiation regimes in synergy with temperature were simulated using ion irradiation by varying Sn(nuclear)/Se(electronic) stopping power. Thus, the samples were irradiated with different ions of different energies. The structure modifications were followed by High Resolution Transmission Electron Microscopy (HRTEM) and Raman microspectrometry. The results show that temperature generally counteracts the disordering effects of irradiation but the achieved reordering level strongly depends on the initial structural state of the graphite matrix. Thus, extrapolating to reactor conditions, for an initially highly disordered structure, irradiation at reactor temperatures (200 - 500 °C) should induce almost no change of the initial structure. On the contrary, when the structure is initially less disordered, there should be a "zoning" of the reordering: In "cold" high flux irradiated zones where the ballistic damage is important, the structure should be poorly reordered; In "hot" low flux irradiated zones where the ballistic

Dosimetry for Crystals Irradiation

CERN Document Server

Lecomte, Pierre

2005-01-01

Before shipment to CMS, all PbWO4 crystals produced in China are irradiated there with 60 Co , in order to insure that the induced absorption coefficient is within specifications. Acceptance tests at CERNand at ENEA also include irradiation with gamma rays from 60 Co sources. There were initially discrepancies in quoted doses and doserates as well as in induced absorption coefficients. The present work resolves the discrepancies in irradiation measurements and defines common dosimetry methods for consistency checks between irradiation facilities.

Elaboration by ion implantation of cobalt nano-particles in silica layers and modifications of their properties by electron and swift heavy ion irradiations; Elaboration par implantation ionique de nanoparticules de cobalt dans la silice et modifications de leurs proprietes sous irradiation d'electrons et d'ions de haute energie

Energy Technology Data Exchange (ETDEWEB)

D' Orleans, C

2003-07-15

This work aims to investigate the capability of ion irradiations to elaborate magnetic nano-particles in silica layers, and to modify their properties. Co{sup +} ions have been implanted at 160 keV at fluences of 2.10{sup 16}, 5.10{sup 16} and 10{sup 17} at/cm{sup 2}, and at temperatures of 77, 295 and 873 K. The dependence of the particle size on the implantation fluence, and more significantly on the implantation temperature has been shown. TEM (transmission electronic microscopy) observations have shown a mean diameter varying from 1 nm for implantations at 2.10{sup 16} Co{sup +}/cm{sup 2} at 77 K, to 9.7 nm at 10{sup 17} Co{sup +}/cm{sup 2} at 873 K. For high temperature implantations, two regions of particles appear. Simulations based on a kinetic 3-dimensional lattice Monte Carlo method reproduce quantitatively the features observed for implantations. Thermal treatments induce the ripening of the particles. Electron irradiations at 873 K induce an important increase in mean particle sizes. Swift heavy ion irradiations also induce the ripening of the particles for low fluences, and an elongation of the particles in the incident beam direction for high fluences, resulting in a magnetic anisotropy. Mechanisms invoked in thermal spike model could also explain this anisotropic growth. (author)

Monte Carlo studies for irradiation process planning at the Portuguese gamma irradiation facility

International Nuclear Information System (INIS)

Oliveira, C.; Salgado, J.; Botelho, M.L.M. Luisa; Ferreira, L.M.

2000-01-01

The paper describes a Monte Carlo study for planning the irradiation of test samples for microbiological validation of distinct products in the Portuguese Gamma Irradiation Facility. Three different irradiation geometries have been used. Simulated and experimental results are compared and good agreement is observed. It is shown that Monte Carlo simulation improves process understanding, predicts absorbed dose distributions and calculates dose uniformity in different products. Based on these results, irradiation planning of the product can be performed

Influence of irradiation conditions on the gamma irradiation effect in polyethylene

International Nuclear Information System (INIS)

Kacarevic-Popovic, Z.; Gal, O.; Novakovic, L.J.; Secerov, B.

2002-01-01

Complete text of publication follows. The radiation cross-linking of polyethylene, due to its high cross-linking yield, has resulted in the radiation technology that has found application in radiation production of heat shrinkable structures and in improvement of mechanical and thermo-physical properties of oriented polyethylene objects. It is observed that the cross-linking efficiency decreases when the irradiation is carried out in the presence of oxygen. In order to estimate the conditions that improve cross-linking efficiency, gamma irradiation effect in two types of polyethylene, irradiated in water and air was investigated. The polyethylene samples used were the low density (LDPE) Lotrene CdF 0302 with 45% crystallinity and the high density (HDPE) Hiplex EHM 6003 with 73% crystallinity. Both kinds of samples, fixed in the Pyrex glass tubes, were simultaneously irradiated with 60 Co gamma rays in distilled water and air, at a doses rate of 9,5 kGy/h (determined by the Fricke dosimeter) at room temperature. Radiation induced oxidative degradation was followed through oxygen containing group formation by the carbonyl group band (1720 cm -1 ) and transvinylene group formation by the band at 966 cm -1 in the infrared spectra. Cross-linking efficiency was determined by gel content using the procedure of the extraction in xylene. The monitored effects of gamma irradiation in water and air point to the conclusion that irradiation in water leads to the lower oxidative degradation and higher cross-linking compared with the effects measured after irradiation in air

Neutron irradiation facility and its characteristics

International Nuclear Information System (INIS)

Oyama, Yukio; Noda, Kenji

1995-01-01

A neutron irradiation facility utilizing spallation reactions with high energy protons is conceived as one of the facilities in 'Proton Engineering center (PEC)' proposed at JAERI. Characteristics of neutron irradiation field of the facility for material irradiation studies are described in terms of material damage parameters, influence of the pulse irradiation, irradiation environments other than neutronics features, etc., comparing with the other sorts of neutron irradiation facilities. Some perspectives for materials irradiation studies using PEC are presented. (author)

Etude par resistivite electrique du comportement d'un alliage amorphe Fe 40Ni 38Mo 4B 18 deforme par traction

Science.gov (United States)

Hoang, Long Phan; Sacovy, Paulette; Delaplace, Jean

1983-02-01

Des rubans d'alliages amorphes Metglas du type Fe 40Ni 38Mo 4B 18 à l'état brut de trempe ont été déformés par traction à la température ambiante et l'on a suivi les variations de la résistance électrique des échantillons au cours de la déformation. Il ressort de ces essais que la déformation plastique qui est de l'ordre de 0.5% avant rupture ne se produit pas de faĉon homogène dans l'échantillon. Les mesures électriques effectuées au cours de la déformation mettent en évidence dans le domaine élastique un effet d'élastorésistance, relativement important ( K ≠ 1); elles montrent que dans le domaine plastique la déformation permanente des échantillons s'accompagne d'une diminution de la résistivité électrique du matériau. Deux hypothèses sont discutées pour expliquer cet effet inattendu, l'un qui fait appel à l'existence de volumes libres, l'autre qui suppose une cristallisation localisée du matériau sous l'effet de la contrainte.

Structure and properties of UV-irradiated LLDPE and alloy of PA66 and the irradiated LLDPE

International Nuclear Information System (INIS)

Ran Qianping; Zou Hua; Wu Shishan; Shen Jian

2006-01-01

Some oxygen-containing groups such as C=O, C-O and -OH were introduced onto linear low-density polyethylene (LLDPE) chains by UV irradiation in air. Their concentration increased with the irradiation time. Crystal shape of the irradiated LLDPE remained an orthorhombic structure, while space of the crystalline plane kept unchanged. The melting temperature and crystallinity decreased due to the LLDPE chain scission into small molecules compound and crystalline defects caused by UV irradiation. Compared with pristine LLDPE, hydrophilicity of the irradiated LLDPE increased due to the introduction of polar oxygen-containing groups, but the tensile strength decreased due to the LLDPE chain degradation and reduction of crystallinity. The temperature of initial weight loss of the irradiated LLDPE was lower than that of pristine LLDPE. An alloy of PA66 and the irradiated LLDPE (irradiated PA66/LLDPE) was prepared by melting blend at 260-270 degree C. Compared to non-irradiated PA66/LLDPE alloy, dispersion of LLDPE particles in the irradiated PA66/LLDPE alloy and interfacial interactions between the components were markedly improved. Therefore, tensile strength and impact strength of the irradiated PA66/ LLDPE were higher than those of the control. (authors)

Nuclear irradiation parameters of beryllium under fusion, fission and IFMIF irradiation conditions

International Nuclear Information System (INIS)

Fischer, U.; Chen, Y.; Leichtle, D.; Simakov, S.; Moeslang, A.; Vladimirov, P.

2004-01-01

A computational analysis is presented of the nuclear irradiation parameters for Beryllium under irradiation in typical neutron environments of fission and fusion reactors, and of the presently designed intense fusion neutron source IFMIF. The analysis shows that dpa and Tritium production rates at fusion relevant levels can be achieved with existing high flux fission reactors while the achievable Helium production is too low. The resulting He-Tritium and He/dpa ratios do not meet typical fusion irradiation conditions. Irradiation simulations in the medium flux test modules of the IFMIF neutron source facility were shown to be more suitable to match fusion typical irradiation conditions. To achieve sufficiently high production rates it is suggested to remove the creep-fatigue testing machine together with the W spectra shifter plate and move the tritium release module upstream towards the high flux test module. (author)

Dose Distribution of Gamma Irradiators

International Nuclear Information System (INIS)

Park, Seung Woo; Shin, Sang Hun; Son, Ki Hong; Lee, Chang Yeol; Kim, Kum Bae; Jung, Hai Jo; Ji, Young Hoon

2010-01-01

Gamma irradiator using Cs-137 have been widely utilized to the irradiation of cell, blood, and animal, and the dose measurement and education. The Gamma cell 3000 Elan (Nordion International, Kanata, Ontario, Canada) irradiator was installed in 2003 with Cs-137 and dose rate of 3.2 Gy/min. And the BioBeam 8000 (Gamma-Service Medical GmbH, Leipzig, Germany) irradiator was installed in 2008 with Cs-137 and dose rate of 3.5 Gy/min. Our purpose was to evaluate the practical dosimetric problems associated with inhomogeneous dose distribution within the irradiated volume in open air state using glass dosimeter and Gafchromic EBT film dosimeter for routine Gamma irradiator dosimetry applications at the KIRAMS and the measurements were compared with each other. In addition, an user guideline for useful utilization of the device based on practical dosimetry will be prepared. The measurement results of uniformity of delivered dose within the device showed variation more than 14% between middle point and the lowest position at central axis. Therefore, to maintain dose variation within 10%, the criteria of useful dose distribution, for research radiation effects, the irradiated specimen located at central axis of the container should be placed within 30 mm from top and bottom surface, respectively. In addition, for measurements using the film, the variations of dose distribution were more then 50% for the case of less than 10 second irradiation, mostly within 20% for the case of more than 20 second irradiation, respectively. Therefore, the irradiation experiments using the BioBeam 8000 irradiator are recommended to be used for specimen required at least more than 20 second irradiation time.

Detection methods for irradiated foods

International Nuclear Information System (INIS)

Dyakova, A.; Tsvetkova, E.; Nikolova, R.

2005-01-01

In connection with the ongoing world application of irradiation as a technology in Food industry for increasing food safety, it became a need for methods of identification of irradiation. It was required to control international trade of irradiated foods, because of the certain that legally imposed food laws are not violated; supervise correct labeling; avoid multiple irradiation. Physical, chemical and biological methods for detection of irradiated foods as well principle that are based, are introducing in this summary

Studies of blood irradiator application

International Nuclear Information System (INIS)

Li Wenhong; Lu Yangqiao

2004-01-01

Transfusion is an important means for medical treatment, but it has many syndromes such as transfusion-associated graft-versus-host disease, it's occurrence rate of 5% and above 90% death-rate. Now many experts think the only proven method is using blood irradiator to prevent this disease. It can make lymphocyte of blood product inactive, so that it can not attack human body. Therefore, using irradiation blood is a trend, and blood irradiator may play an important role in medical field. This article summarized study of blood irradiator application, including the meaning of blood irradiation, selection of the dose for blood irradiation and so on

Irradiation of packaged food

International Nuclear Information System (INIS)

Kilcast, D.

1990-01-01

Food irradiation is used to improve the safety of food by killing insects and microorganisms, to inhibit sprouting in crops such as onions and potatoes and to control ripening in agricultural produce. In order to prevent re-infestation and re-contamination it is essential that the food is suitably packed. Consequently, the packaging material is irradiated whilst in contact with the food, and it is important that the material is resistant to radiation-induced changes. In this paper the nature of the irradiation process is reviewed briefly, together with the known effects of irradiation on packaging materials and their implications for the effective application of food irradiation. Recent research carried out at the Leatherhead Food RA on the possibility of taint transfer into food is described. (author)

Issues in food irradiation

International Nuclear Information System (INIS)

Mills, S.

1987-04-01

This discussion paper has two goals: first, to raise public awareness of food irradiation, an emerging technology in which Canada has the potential to build a new industry, mainly oriented to promising overseas markets; and second, to help build consensus among government and private sector decision makers about what has to be done to realize the domestic and export potential. The following pages discuss the potential of food irradiation; indicate how food is irradiated; outline the uses of food irradiation; examine questions of the safety of the equipment and both the safety and nutritional value of irradiated food; look at international commercial developments; assess the current and emerging domestic scene; and finally, draw some conclusions and offer suggestions for action

The effect of γ-irradiation on changes of blood chemistry in RC-MAP after irradiation

International Nuclear Information System (INIS)

Hirose, Tetsuhito; Katayama, Norifumi; Okamoto, Yukiharu; Tsuda, Tadaaki; Ota, Kiichiro; Nishioka, Shingo; Tsumura, Michiyo; Yukawa, Mariko

1997-01-01

Irradiation to transfused blood is obligated to prevent from post transfusion graft-versus-host disease (PT-GVHD) by inactivation of lymphocytes. The rule of irradiated dose was not determined, it's dose being ranged from 15 to 50 Gy, but it's dose was done by each institute. We investigated an adequate dose of irradiation to blood on effects of plasma Na, potassium (K), Chloride (Cl), LDH, GOT, BUN and total protein (T.P) after irradiation of transfused blood. By comparison of plasma Na and K in non-irradiated blood, plasma K was increased and decreased in a parallelism of period of stored irradiated blood, two days after it's irradiation. Effects of Na and K levels were dose dependent. LDH level was increased in a time-dependency, but not by it's dose plasma Cl, LDH, GOT, BUN and T.P levels were not influenced. Our results indicated that the mechanism of RBC permeability after irradiation seemed to be inactivated Na-K ATPase activity in RBC cell membrane. (author)

Gemstone dedicated gamma irradiation development

Energy Technology Data Exchange (ETDEWEB)

Omi, Nelson M.; Rela, Paulo R. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mails: nminoru@ipen.br; prela@ipen.br

2007-07-01

The gemstones gamma irradiation process to enhance the color is widely accepted for the jewelry industry. These gems are processed in conventional industrial gamma irradiation plant which are optimized for other purposes, using underwater irradiation devices with high rejection rate due to its poor dose uniformity. A new conception design, which states the working principles and manufacturing ways of the device, was developed in this work. The suggested device's design is based on the rotation of cylindrical baskets and their translation in circular paths inside and outside a cylindrical source rack as a planetary system. The device is meant to perform the irradiation in the bottom of the source storage pool, where the sources remain always shielded by the water layer. The irradiator matches the Category III IAEA classification. To verify the physical viability of the basic principle, tests with rotating cylindrical baskets were performed in the Multipurpose Irradiator constructed in the CTR, IPEN. Also, simulations using the CADGAMMA software, adapted to simulate underwater irradiations, were performed. With the definitive optimized irradiator, the irradiation quality will be enhanced with better dose control and the production costs will be significantly lower than market prices due to the intended treatment device's optimization. This work presents some optimization parameters and the expected performance of the irradiator. (author)

Vitamin A in irradiated foodstuffs

International Nuclear Information System (INIS)

Diehl, J.F.

1979-01-01

Vitamin A losses induced by 10 MeV electrons in cream cheese, calf liver sausage, pig liver, whole egg powder and margarine continued to increase during storage for 4-8 weeks in presence of air. Thus, vitamin A loss in sausage irradiated with 5 Mrad was 22% on the day after irradiation, 61% after 4 weeks. Irradiation and storage at 0 0 C instead of at ambient temperature reduced these losses considerably. Exclusion of air (vacuum, nitrogen) or irradiation on dry ice (approx. -80 0 C) were even more effective in preventing destruction of vitamin A. After 4 weeks of storage, cream cheese irradiated at 5 Mrad had lost 60% when irradiated and stored in air at ambient temperature, 20% in nitrogen atmosphere, 5% in vacuum package, and 5% when irradiated on dry ice and stored at ambient temperture. (orig.) [de

Vitamin A in irradiated foodstuffs

International Nuclear Information System (INIS)

Diehl, J.F.

1979-01-01

Vitamin A losses induced by 10 MeV electrons in cream cheese, calf liver sausage, pig liver, whole egg powder and magarine continued to increase during storage for 4-8 weeks in presence of air. Thus, vitamin A loss in sausage irradiated with 5 Mrad was 22% on the day after irradiation, 61% after 4 weeks. Irradiation and storage at 0 0 C instead of ambient temperature reduced these losses considerably. Exclusion of air (vacuum, nitrogen) or irradiation on dry ice (approx. -80 0 C) were even more effective in preventing destruction of vitamin A. After 4 weeks of storage, cream cheese irradiated at 5 Mrad had lost 60% when irradiated and stored in air at ambient temperature, 20% in nitrogen atmosphere, 5% in vacuum package, and 5% when irradiated on dry ice and stored at ambient temperature. (orig.) [de

Vitamin A in irradiated foodstuffs

Energy Technology Data Exchange (ETDEWEB)

Diehl, J F [Bundesforschungsanstalt fuer Ernaehrung, Karlsruhe (Germany, F.R.)

1979-01-01

Vitamin A losses induced by 10 MeV electrons in cream cheese, calf liver sausage, pig liver, whole egg powder and margarine continued to increase during storage for 4-8 weeks in presence of air. Thus, vitamin A loss in sausage irradiated with 5 Mrad was 22% on the day after irradiation, 61% after 4 weeks. Irradiation and storage at 0/sup 0/C instead of at ambient temperature reduced these losses considerably. Exclusion of air (vacuum, nitrogen) or irradiation on dry ice (approx. -80/sup 0/C) were even more effective in preventing destruction of vitamin A. After 4 weeks of storage, cream cheese irradiated at 5 Mrad had lost 60% when irradiated and stored in air at ambient temperature, 20% in nitrogen atmosphere, 5% in vacuum package, and 5% when irradiated on dry ice and stored at ambient temperature.

Vitamin A in irradiated foodstuffs

Energy Technology Data Exchange (ETDEWEB)

Diehl, J F [Bundesforschungsanstalt fuer Ernaehrung, Karlsruhe (Germany, F.R.)

1979-01-01

Vitamin A losses induced by 10 MeV electrons in cream cheese, calf liver sausage, pig liver, whole egg powder and magarine continued to increase during storage for 4-8 weeks in presence of air. Thus, vitamin A loss in sausage irradiated with 5 Mrad was 22% on the day after irradiation, 61% after 4 weeks. Irradiation and storage at 0/sup 0/C instead of ambient temperature reduced these losses considerably. Exclusion of air (vacuum, nitrogen) or irradiation on dry ice (approx. -80/sup 0/C) were even more effective in preventing destruction of vitamin A. After 4 weeks of storage, cream cheese irradiated at 5 Mrad had lost 60% when irradiated and stored in air at ambient temperature, 20% in nitrogen atmosphere, 5% in vacuum package, and 5% when irradiated on dry ice and stored at ambient temperature.

Detection of low amount of irradiated ingredients in non-irradiated precooked meals

Science.gov (United States)

Marchioni, Eric; Horvatovich, Peter; Ndiaye, Bara; Miesch, Michel; Hasselmann, Claude

2002-03-01

The application of the European Standards for the detection of irradiated food by thermoluminescence of silicates, electron-spin resonance spectroscopy of bones or gas chromatography-mass spectrometry of 2-alkylcyclobutanones does not allow the detection of irradiated ingredients included in small quantity in the matrix of a food which has not been irradiated, but which could be subjected to various processing technologies such as cooking, freezing or storage. The use of an enzymatic food hydrolysis carried out at moderated temperature, for the extraction of the food-contaminating silicate minerals and bone fragments, followed by a purification of the extracts by a high-density aqueous solution of sodium polytungstate, allows a simultaneous detection of weak inclusions (0.1% m:m) of irradiated spices and mechanically deboned turkey meat (MRM) included in various precooked foods. Moreover, the use of a supercritical fluid extraction procedure for the 2-alkylcyclobutanones or an additional purification step of the lipid extracts made it possible to lower the detection limit of the 2-alkylcyclobutanones radiation-induced from triglycerides. Using gas chromatography-mass spectrometry, down to 0.5% (m:m) of irradiated MRM included in non-irradiated chicken quenelles could be detected.

Detection of low amount of irradiated ingredients in non-irradiated precooked meals

International Nuclear Information System (INIS)

Marchioni, Eric; Horvatovich, Peter; Ndiaye, Bara; Miesch, Michel; Hasselmann, Claude

2002-01-01

The application of the European Standards for the detection of irradiated food by thermoluminescence of silicates, electron-spin resonance spectroscopy of bones or gas chromatography-mass spectrometry of 2-alkylcyclobutanones does not allow the detection of irradiated ingredients included in small quantity in the matrix of a food which has not been irradiated, but which could be subjected to various processing technologies such as cooking, freezing or storage. The use of an enzymatic food hydrolysis carried out at moderated temperature, for the extraction of the food-contaminating silicate minerals and bone fragments, followed by a purification of the extracts by a high-density aqueous solution of sodium polytungstate, allows a simultaneous detection of weak inclusions (0.1% m:m) of irradiated spices and mechanically deboned turkey meat (MRM) included in various precooked foods. Moreover, the use of a supercritical fluid extraction procedure for the 2-alkylcyclobutanones or an additional purification step of the lipid extracts made it possible to lower the detection limit of the 2-alkylcyclobutanones radiation-induced from triglycerides. Using gas chromatography-mass spectrometry, down to 0.5% (m:m) of irradiated MRM included in non-irradiated chicken quenelles could be detected

A study on UV irradiated HDPE

International Nuclear Information System (INIS)

Sang Haibo; Liu Zimin; Wu Shishan; Shen Jian

2006-01-01

The structure and properties of HDPE irradiated by ultraviolet (UV) in ozone atmosphere were studied by FT-IR, XPS, gel, and water contact angle test. The oxygen-containing groups such as C=O, C-O and C(=O)O were introduced onto high density polyethylene (HDPE) chains through ultraviolet irradiation in ozone atmosphere, their content increased with the UV irradiation time. Under the same UV irradiation conditions, amount of the oxygen-containing groups introduced in ozone atmosphere was more than that in air atmosphere, indicating that the speed of oxygen-containing groups introduced through UV irradiation in ozone atmosphere was faster than that in air. Therefore, HDPE could be quickly functionalized through UV irradiation in ozone atmosphere. There was no gel formed in the HDPE irradiated in ozone atmosphere. After UV irradiation, the water contact angle of HDPE decreased, and its hydrophilicity was improved, suggesting that the compatibility between the irradiated HDPE and polar polymer or inorganic fillers may be better. Compared with HDPE, the temperature of initial weight loss for irradiated HDPE decreased. The structure and properties of irradiated HDPE/CaCO 3 blend were also investigated. The results showed that the compatibility and interfacial action of the irradiated HDPE/CaCO 3 blend were improved compared to that of HDPE/CaCO 3 blend. The mechanical properties of irradiated HDPE/CaCO 3 blend increased with increasing irradiation time. (authors)

Detection methods of irradiated foodstuffs

Energy Technology Data Exchange (ETDEWEB)

Ponta, C C; Cutrubinis, M; Georgescu, R [IRASM Center, Horia Hulubei National Institute for Physics and Nuclear Engineering, PO Box MG-6, RO-077125 Magurele-Bucharest (Romania); Mihai, R [Life and Environmental Physics Department, Horia Hulubei National Institute for Physics and Nuclear Engineering, PO Box MG-6, RO-077125 Magurele-Bucharest (Romania); Secu, M [National Institute of Materials Physics, Bucharest (Romania)

2005-07-01

Full text: Food irradiation has, in certain circumstances, an important role to play both in promoting food safety and in reducing food losses. The safety and availability of nutritious food are essential components of primary health care. WHO actively encourages the proper use of food irradiation in the fight against foodborne diseases and food losses. To this end, it collaborates closely with FAO and IAEA. Food irradiation can have a number of beneficial effects, including delay of ripening and prevention of sprouting; control of insects, parasites, helminths, pathogenic and spoilage bacteria, moulds and yeasts; and sterilization, which enables commodities to be stored unrefrigerated for long periods. The 1990s witnessed a significant advancement in food irradiation processing. As a result, progress has been made in commercialization of the technology, culminating in greater international trade in irradiated foods and the implementation of differing regulations relating to its use in many countries. Codex General Standard for Irradiated Foodstuffs and Recommended International Code of Practice for the Operation of Irradiation Facilities Used for the Treatment of Foods regulate food irradiation at international level. At European Union level there are in power Directive 1999/2/EC and Directive1999/3/EC. Every particular country has also its own regulations regarding food irradiation. In Romania, since 2002 the Norms Regarding Foodstuffs and Food Ingredients Treated by Ionizing Radiation are in power. These Norms are in fact the Romanian equivalent law of the European Directives 1999/2/EC and 1999/3/EC. The greater international trade in irradiated foods has led to the demand by consumers that irradiated food should be clearly labeled as such and that methods capable of differentiating between irradiated and nonirradiated products should be available. Thus a practical basis was sought to allow consumers to exercise a free choice as to which food they purchase. If a

Containers in food irradiation

International Nuclear Information System (INIS)

Bolumen, S.; Espinosa, R.

1997-01-01

The preservation of food by irradiation is promising technology which increases industrial application. Packaging of irradiated foods is an integral part of the process. Judicious selection of the package material for successful trade is essential. In this paper is presented a brief review of important aspects of packaging in food irradiation [es

Nutritional aspects of irradiated shrimp

International Nuclear Information System (INIS)

Shamsuzzaman, K.

1989-11-01

Data available in the literature on the nutritional aspects of irradiated shrimp are reviewed and the indication is that irradiation of shrimp at doses up to about 3.2 kGy does not significantly affect the levels of its protein, fat, carbohydrate and ash. There are no reports on the effect of irradiation of shrimp above 3.2 kGy on these components. Limited information available indicates that there are some minor changes in the fatty acid composition of shrimp as a result of irradiation. Irradiation also causes some changes in the amino acid composition of shrimp; similar changes occur due to canning and hot-air drying. Some of the vitamins in shrimp, such as thiamine, are lost as a result of irradiation but the loss is less extensive than in thermally processed shrimp. Protein quality of shrimp, based on the growth of rats as well as that of Tetrahymena pyriformis, is not affected by irradiation. No adverse effects attributed to irradiation were found either in short-term or long-term animal feeding tests

The present situation of irradiation services

International Nuclear Information System (INIS)

Hironiwa, Takayuki

2014-01-01

The present state of food irradiation in Japan is presented from a point of view of a trustee for irradiation business. Radiation sprout inhibition of potatoes, only approved by Government, and spice treatment, now being applied for, are explained. Existing establishments capable of entrusting irradiation services as business in Japan are outlined including Co-60 gamma ray and X-ray irradiation and electron beam irradiation. Principles of irradiation-induced physical and chemical effects in irradiated materials specifically organic polymers and brief explanation of facilities together with safety devices are also explained. (S. Ohno)

Commercial food irradiation in practice

International Nuclear Information System (INIS)

Leemhorst, J.G.

1990-01-01

Dutch research showed great interest in the potential of food irradiation at an early stage. The positive research results and the potential applications for industry encouraged the Ministry of Agriculture and Fisheries to construct a Pilot Plant for Food Irradiation. In 1967 the Pilot Plant for Food Irradiation in Wageningen came into operation. The objectives of the plant were: research into applications of irradiation technology in the food industry and agricultural industry; testing irradiated products and test marketing; information transfer to the public. (author)

Food irradiation: progress in Canada

International Nuclear Information System (INIS)

Wilson, B.K.

1985-01-01

The subject is discussed under the headings: food irradiation regulatory situation in Canada; non-regulatory developments (poultry irradiation; fish irradiation; Government willingness to fund industry initiated projects; Government willingness to establish food irradiation research and pilot plant facilities; food industry interest is increasing significantly; Canadian Consumers Association positive response; the emergence of new consulting and entrepreneurial firms). (U.K.)

Food irradiation and the consumer

International Nuclear Information System (INIS)

Thomas, P.A.

1990-01-01

The poster presents a review of research work undertaken on the perception and understanding that consumers have of food irradiation. Food irradiation is not a revolutionary new food processing technique, in fact it is probably one of the most investigated methods presently available. Many countries such as Belgium, France, Denmark, Italy, Spain, the Netherlands and the United States of America permit food irradiation. In Britain it is presently banned although this is currently under review. Awareness of food irradiation by the general public in Britain, although not extensively researched would appear to be increasing, especially in the light of recent media coverage. New quantitative and qualitative work indicates that the general public are concerned about the safety and effectiveness of food irradiation. Research has shown that a large proportion of consumers in Britain, if given the opportunity to purchase irradiated food, would not do so. Further exploration into this response revealed the fact that consumers are confused over what food irradiation is. In addition, there is concern over the detection of irradiated food. The views presented in this paper, of the consumer reaction to irradiated food are of great importance to those involved in the food industry and industries allied to it, which are ultimately dependent on the consumer for their commercial survival. (author)

Dosimetry of blood irradiator - 2000

International Nuclear Information System (INIS)

Mhatre, Sachin G.V.; Shinde, S.H.; Bhat, R.M.; Rao, Suresh; Sharma, D.N.

2008-01-01

Full text: Blood transfusion to an immunodeficient or immunosuppressed patient has a high risk involved due to occurrence of Transfusion Graft Versus Host Disease (T-GVHD). In order to eliminate this problem, blood is routinely exposed to ionizing radiation (gamma) prior to transfusion. Doses ranging from 15 Gy to 50 Gy can prevent T-GVHD. Aim of the present work was to perform dosimetry of 60 Co Blood Irradiator-2000 developed by Board of Radiation and isotope Technology (BRIT), India; using FBX dosimetric system. Dose-rate measured by FBX dosimeter was intercompared with Fricke dosimeter, which is a Reference Standard dosimeter. Experiments included measurement of dose-rate at the centre of irradiation volume, dose mapping in the central vertical plane within the irradiation volume and measurement of average dose received by blood sample using blood bags filled with FBX dosimeter by simulating actual irradiation conditions. During irradiation, the sample chamber is retracted into a cylindrical source cage, so that the sample is irradiated from all sides uniformly. Blood irradiator-2000 has sample rotation facility for increasing the dose uniformity during irradiation. The performance of this was investigated by measuring the central vertical plane dose profile in stationary state as well in rotation using the sample rotation facility (60 rpm). FBX being an aqueous dosimetric system fills container of irregular shape being irradiated hence can be used to integrate the dose over the volume. Dose-rate measured by FBX dosimeter was intercompared with Fricke dosimeter, which was in good agreement. Average dose-rate at the centre of irradiation volume and within the blood bag was measured by FBX and Fricke dosimeters. It was observed that dose profiles measured by FBX and Fricke dosimeters agreed within ± 2%. Dose uniformity within the irradiation volume was found to reduce from 21% to 17% when the sample rotation facility was used. Thus, it is suggested by the

The response of previously irradiated mouse skin to heat alone or combined with irradiation: influence of thermotolerance

International Nuclear Information System (INIS)

Wondergem, J.; Haveman, J.

1983-01-01

The effect of previous x-irradiation on the response to hyperthermia (44 0 C), x-irradiation, and irradiation combined with hyperthermia (43 0 C or 44 0 C) was studied in mouse foot skin. Irradiation of mice feet 90 days before, with 20 Gy, increased the subsequent response to heat alone, or combined with irradiation, as well as to irradiation alone. It had little effect on the thermal enhancement ratios for both acute and late skin reactions. Memory of the previous irradiation treatment could be masked when the temperature of the subsequent heat treatment alone, or combined with irradiation, was 44 0 C. Priming heat treatment induced resistance to a subsequent heat treatment and to a subsequent combined irradiation-heat treatment in normal as well as previously irradiated skin. When late skin reaction was considered, a larger 'memory' of the previous irradiation treatment was always evident, compared to acute skin reaction: the 'remembered' dose in the late skin reaction was about twice the 'remembered' dose in the acute reaction. (U.K.)