WorldWideScience

Sample records for comportement des actinides

  1. Behaviour of trivalent actinides and lanthanide elements in chloride solution; Comportement des lanthanides et transuraniens trivalents en milieu chlorhydrique

    Energy Technology Data Exchange (ETDEWEB)

    Marin, B [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    The aim of this work is to compare the complexation in chloride solutions of trivalent lanthanides and actinides. We have first studied the solvatation of these cations without complexation. We found a difference between Am, Cm and Rare Earths (we can separate lanthanides into Light and Heavy Rare Earths). For studying the complexation we choose the technic of electrophoresis on paper after establishing a simple theory of mobilities in complex solutions. The hydrolysis of these cations was studied and compared in chloride solutions. We have then studied the complexation with the Cl{sup -} ligand in some solutions: HCl, NH{sub 4}Cl, CaCl{sub 2}, CeCl{sub 3}, LiCl. We have established that the complexation is the same in dilute HCl solutions but in concentrated solutions the trivalent actinides are more complexed. This difference is sharper in LiCl solutions. We also proposed the different models of complex in these solutions. (author) [French] Le but de ce travail est de comparer les transuraniens et lanthanides trivalents au point de vue de leur complexation en solution chlorhydrique. Nous avons ete amenes tout d'abord a etudier la solvatation de ces cations non complexes. C'est ainsi que nous pouvons constater une difference entre Am, Cm et les lanthanides. Ces derniers pouvant se separer en lanthanides legers et lanthanides lourds. Pour etudier la complexation nous avons utilise l'electrophorese sur papier apres avoir donne une theorie simple des mobilites en milieu complexant. Apres avoir etudie et compare l'hydrolyse de ces divers cations en solution chlorhydrique, nous avons etudie leur complexation avec l'ion Cl{sup -} dans dans divers milieux: HCl, NH{sub 4}Cl, CaCl{sub 2}, CeCl{sub 3}, LiCl. ous avons note qu'en solution HCl les deux series se comportent de la meme facon pour des concentrations faibles en Cl{sup -} mais que les transuraniens se complexent plus fortement dans les solutions concentrees. Cette difference s'accroit encore dans les milieux

  2. Structure et comportement des modeles mathematiques en biologie

    OpenAIRE

    Gouzé , Jean-Luc

    1988-01-01

    Nous décrivons une méthodologie assez générale pour construire des modèles mathématiques en biologie. A partir de la structure du modèle, on peut déduire des résultats sur le comportement des solutions du système différentiel : existence et stabilité de spoints stationnaires, des solutions périodiques... Ces résultats dépendent suelement des relations structurelles dans le modèle, et pas de la formulation quantitative des fonctions qui décrivent ces relations.

  3. Comportement des polluants des eaux pluviales urbaines en ...

    African Journals Online (AJOL)

    développement et la croissance des organismes vivant dans l'eau et particulièrement les micro- organismes. Le suivi des températures enregistrées oscille entre 9 et 16°C dans les trois sites d'observation durant la période ... de la lumière du soleil. Le site C est bien aéré et .... Effets de différents modes de gestion des eaux ...

  4. Modélisation du comportement et des couplages HMC des milieux poreux

    OpenAIRE

    Hoang , Ha

    2012-01-01

    Modelling of the behavior and the couplings HMC of the porous circles; La modélisation du comportement hydromécanique chimique des milieux poreux saturés et non saturés est abordée au niveau microscopique et mésoscopique. Au niveau microscopique la modélisation des écoulements diphasiques est basée sur une représentation du réseau poral comme un ensemble de tubes dont les orientations et les rayons sont choisis sur un principe d’équivalence avec les pores. L’algorithme régissant la génération...

  5. Etude du processus de changement vecu par des familles ayant decide d'adopter volontairement des comportements d'attenuation des changements climatiques

    Science.gov (United States)

    Leger, Michel T.

    Les activites humaines energivores telles l'utilisation intensive de l'automobile, la surconsommation de biens et l'usage excessif d'electricite contribuent aux changements climatiques et autres problemes environnementaux. Bien que plusieurs recherches rapportent que l'etre humain est de plus en plus conscient de ses impacts sur le climat de la planete, ces memes recherches indiquent qu'en general, les gens continuent a se comporter de facon non ecologique. Que ce soit a l'ecole ou dans la communaute, plusieurs chercheurs en education relative a l'environnement estiment qu'une personne bien intentionnee est capable d'adopter des comportements plus respectueux de l'environnement. Le but de cette these etait de comprendre le processus d'integration de comportements d'attenuation des changements climatiques dans des familles. A cette fin, nous nous sommes fixe deux objectifs : 1) decrire les competences et les procedes qui favorisent l'adoption de comportements d'attenuation des changements climatiques dans des familles et 2) decrire les facteurs et les dynamiques familiales qui facilitent et limitent l'adoption de comportements d'attenuation des changements climatiques dans des familles. Des familles ont ete invitees a essayer des comportements personnels et collectifs d'attenuation des changements climatiques de sorte a integrer des modes de vie plus ecologiques. Sur une periode de huit mois, nous avons suivi leur experience de changement afin de mieux comprendre comment se produit le processus de changement dans des familles qui decident volontairement d'adopter des comportements d'attenuation des changements climatiques. Apres leur avoir fourni quelques connaissances de base sur les changements climatiques, nous avons observe le vecu de changement des familles durant huit mois d'essais a l'aide de journaux reflexifs, d'entretiens d'explicitation et du journal du chercheur. La these comporte trois articles scientifiques. Dans le premier article, nous presentons une

  6. Experimental study of kinetic and mechanism of dissolution of apatite structured minerals. Application to the prediction of the long term behavior of an actinides storage host matrix; Etude experimentale de la cinetique et des mecanismes d'alteration de mineraux apatitiques. Application au comportement d'une ceramique de confinement d'actinides mineurs

    Energy Technology Data Exchange (ETDEWEB)

    Chairat, C

    2005-11-15

    The motivation for this study is to assess the potential of using apatite structured ceramics as long-lived actinide storage hosts. To assess their ability to resist aqueous corrosion, the dissolution of natural fluoro-apatite and synthetic Nd-britholite (neodymium is a proxy for the trivalent actinides) was studied. Mineral surfaces were characterized using a combined spectrometric, electrokinetic and potentiometric approach and dissolution rates were measured in closed and open system reactors as a function of solution composition. Experimental results suggest apatitic minerals dissolve via distinct step sequence: 1) fluoride release, 2) release of the calcium situated in the M1, and 3) the simultaneous removal of phosphate and calcium II via the breaking of only Ca-O bonds. TST based rate equations based in this mechanism accurately describe fluoro-apatite and synthetic britholite dissolution rates as a function of solution composition. Nd release rates are limited by precipitation of Nd-rhabdophane. (author)

  7. ETUDE DU COMPORTEMENT MECANIQUE DES ACIERS HYPEREUTECTOIDES DANS LE DOMAINE DE TEMPERATURE INTERCRITIQUE DYNAMIQUE

    Directory of Open Access Journals (Sweden)

    R GHERIANI

    2001-06-01

    Full Text Available L'étude que nous présentons contribue à une meilleure compréhension de l'influence de la vitesse de déformation et de la température sur le comportement mécanique des aciers hypereutectoïdes dans le domaine de température intercritique dynamique. Les courbes expérimentales obtenues en torsion présentent un intérêt notable dans la mesure où elles permettent de caractériser le comportement mécanique de l'acier 100C6; de plus, elles fournissent  des informations précieuses sur la capacité maximale de déformation de l'alliage. Les essais de torsion, menés jusqu'à rupture des éprouvettes, permettent d'effectuer un classement des matériaux selon leur ductilité. Les résultats obtenus sur l'acier 100C6 ont permis de préciser le comportement mécanique à tiède  de cet acier. Les aciers hypoeutectoïdes présentent, dans les domaines de température compris entre Ac1 et Ac3 en condition dynamique, une capacité de déformation élevée résultant de l'évolution, en cours de déformation, des phases a et g et de leurs mécanismes d'adoucissement. Nous nous sommes alors posé la question: quel est le comportement d'un acier hypereutectoïde, donc ne présentant  pas de domaine biphasé (a + g à l'équilibre, lorsqu'il est déformé à une température supérieure à Ac1?

  8. Chemical durability and resistance to irradiation of LnYSiAlO (Ln=La or Ce) glasses, potential immobilization matrix of minor actinides; Durabilite chimique et comportement a l'irradiation des verres quaternaires LnYSiAlO (Ln = La ou Ce), matrice potentielle d'immobilisation d'actinides mineurs trivalents

    Energy Technology Data Exchange (ETDEWEB)

    Gavarini, St

    2002-11-01

    Rare earth aluminosilicate glasses are known for their interesting mechanical and optical properties. Recent studies have shown that their chemical durability was very good too, such they have the potential to be used in the nuclear industry for the specific immobilization of trivalent actinides. Initial dissolution rates of LaYSiAlO and CeYSiAlO were determined using a Soxhlet device (dynamic leaching). The differences linked to the nature of the rare earth element were studied by synthesizing analogous glasses that only differed in their rare earth element composition (%at.): Y-5%, La-5 %, Si-15%, Al-10% O-65%. The influence of pH on the dissolution mechanisms and kinetics was also studied by static leaching tests performed in dilute solutions of NaOH or HNO{sub 3}. Electronic defects and collision cascades, induced by a-disintegration of radioelements confined in storage matrix, can cause important modifications in the glass structure and, thus, influence its chemical durability. To simulate these effects, glass samples were irradiated with {beta} particles and heavy ions accelerated to 2,5 MeV and 200 keV, respectively. Monoliths were then leached in static bi-distilled water (pH{>=}{>=} 5.5) for one month in an autoclave heated to 90 degrees C. Initially, the structural changes caused by irradiation were determined using Raman, NMR and EPR spectroscopies. Ion {mu}-beams, SEM-EDS and XPS analysis were also performed to evaluate the potential modifications of the superficial composition. Finally, the leaching behavior was studied, for both irradiated and unirradiated samples, through solution and solid elementary characterization. (author)

  9. comportement des nouveaux riz africains face a la pyriculariose

    African Journals Online (AJOL)

    AISA

    Key words : Riz, NERICA variety, blast, inoculation, resistance, Côte d'Ivoire. INTRODUCTION. Les nouveaux riz africains ou NERICA (New Rice for Africa) sont des hybrides interspécifiques. (Oryza glaberrima X O. sativa) mises au point par l'ADRAO (actuellement dénommé Centre. Africain pour le Riz) dans les années 90.

  10. Comportement en flexion des bétons fibrés sous chargement cyclique

    Directory of Open Access Journals (Sweden)

    Boulekbache Bensaid

    2014-04-01

    Full Text Available Ce papier présente les résultats d’une étude expérimentale sur le comportement en flexion des bétons de fibres métalliques. On étudie l’effet de la rhéologie du béton sur l’orientation des fibres et l’influence de l’orientation sur les propriétés mécaniques. La rigidité de l’ancrage des fibres étudiée par les essais cycliques est liée aux caractéristiques rhéologiques et mécaniques de la matrice. Les résultats montrent que la fluidité des bétons est un paramètre essentiel de l’orientation des fibres. Dès lors que l’on obtient une orientation dans le sens de l’efficacité mécanique, la résistance à la flexion est nettement améliorée.

  11. Programme and Abstracts. 38. Journees des Actinides together with the 7. School on the Physics and Chemistry of the Actinides

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    Journees des Actinides (JdA) is a traditional informal actinide forum, including physics, chemistry, and materials research. It regularly brings together experts from fields involved, taking place in a very informal way, emphasizing exchanges and discussions on current issues in actinide science. At the 38{sup th} JdA (10-15 April 2008; Wroclaw, Poland) scientific communications on the following topics on physics and chemistry of the actinides were presented: (a) inorganic and organometallic chemistry; (b) strongly correlated behaviour, superconductivity, quantum criticality; (c) materials science; (d) theory, electronic structure; (e) nuclear fuel cycle, environment.

  12. Programme and Abstracts. 38. Journees des Actinides together with the 7. School on the Physics and Chemistry of the Actinides

    International Nuclear Information System (INIS)

    2008-01-01

    Journees des Actinides (JdA) is a traditional informal actinide forum, including physics, chemistry, and materials research. It regularly brings together experts from fields involved, taking place in a very informal way, emphasizing exchanges and discussions on current issues in actinide science. At the 38 th JdA (10-15 April 2008; Wroclaw, Poland) scientific communications on the following topics on physics and chemistry of the actinides were presented: (a) inorganic and organometallic chemistry; (b) strongly correlated behaviour, superconductivity, quantum criticality; (c) materials science; (d) theory, electronic structure; (e) nuclear fuel cycle, environment

  13. Rhéologie des alliages de fer pur. Lois de comportement a chaud avec recristallisation dynamique

    OpenAIRE

    Belkebir , Abdellah

    1994-01-01

    pas de résumé en anglais; Le comportement rhéologique des aciers, élabores a partir de fer de haute pureté, a été caractérisé par compression a chaud. Pour mettre en évidence l'influence individuelle ou conjointe des phénomènes de ségrégation et de précipitation, trois nuances d'acier ont été étudiées. L'influence de la vitesse et de la température de déformation sur le comportement de ces alliages a été examinée a travers les variations des paramètres rhéologiques (coefficient de sensibilité...

  14. Les besoins en oxygène des poissons marins et leur comportement en conditions hypoxiques (revue bibliographique)

    OpenAIRE

    Person-le Ruyet, Jeanine

    1986-01-01

    Les données expérimentales relatives aux besoins en oxygène des poissons marins (pélagiques et démersaux) sont rappelées. Les variations de la consommation d'oxygène en fonction du poids (w) sont généralement décrites par l'équation : M02 (ml/h) = 0,33 W0. 80 Le comportement général des poissons en conditions hypoxiques et leurs limites de tolérance sont de même considérés en fonction du stade de développement.

  15. Influence du comportement des accompagnants sur le vécu des patients admis pour hémorragies digestives hautes au CHU campus de Lomé (Togo)

    Science.gov (United States)

    Bagny, Aklesso; Dusabe, Angelique; Bouglouga, Oumboma; Lawson-ananisoh, Mawuli Late; Kaaga, Yeba Laconi; Djibril, Mohaman Awalou; Soedje, Kokou Mensah; Dassa, Simliwa Kolou; Redah, Datouda

    2014-01-01

    Introduction L'hémorragie digestive haute est une urgence, qui constitue souvent pour les patients un danger mortel suscitant inquiétude et agitation. Dans cet état, le patient dépend de ses accompagnants pour ses soins et pour honorer le traitement; mais souvent, il a été observé une discordance entre l'urgence et les comportements des accompagnants. Le but de cette étude était de décrire les facteurs socioéconomiques et psychologiques pouvant influencer les comportements des accompagnants des patients admis pour HDH, estimer l'indice de relation entre ces comportements et les facteurs associés d'une part et le vécu des patients admis pour HDH d'autre part. Méthodes Il s'agit d'une étude prospective menée de Septembre 2010 à Juin 2011 (soit 10 mois). Nous avions utilisé l'entretien semi-dirigé et l'observation directe pour collecter nos données, ces dernières avaient été traitées par les méthodes statistiques et d'analyse de contenu. Résultats Dans la présente étude, les comportements des accompagnants des patients admis pour HDH sont en majorité marqués par l'abandon (84%) et le manque de sollicitude (80,2%). Ces comportements sont souvent stimulés par les facteurs socioéconomiques tels que les difficultés économiques (83,2%), des conflits intrafamiliaux (85,1%) et des représentations (maladie incurable ou envoûtement) de la maladie par les accompagnants (73,3%) des cas. Quant aux patients, ils vivent ces comportements comme étant des menaces de mort ou des rejets (77,20%) et comme étant une dévalorisation ou une humiliation de la part de leurs accompagnants (70,30%). Les résultats confirment l'existence de lien significatif entre les comportements des accompagnants et les facteurs socio économiques, entre les comportements des accompagnants et des facteurs psychologiques, et entre le vécu des patients admis pour l'HDH et les comportements des accompagnants. Conclusion Des études ultérieures devraient aborder les points

  16. Influence de la protection cathodique sur le comportement électrochimique des couches de corrosion d'acier au carbone

    OpenAIRE

    Tran Tron Long , Mai; Sutter , Eliane; Tribollet , Bernard

    2013-01-01

    11 pages, www.mattech-journal.org; International audience; Les propriétés électrochimiques de la couche de dépôts de corrosion formée à la surface des coupons d'acier E24 immergés pendant plusieurs années dans l'eau de mer sous différentes conditions de protection cathodique ont éteé'tudiées à l'aide de la spectroscopie d'impédance électrochimique et de mesures globale et locale de courant. Les résultats obtenus montrent que la couche de dépôts dont le comportement est déterminé par sa sous-c...

  17. Le comportement mécanique des risers. Influence des principaux paramètres Mechanical Behaviour of Marine Risers Mode of Influence of Principal Parameters

    Directory of Open Access Journals (Sweden)

    Sparks C.

    2006-11-01

    Full Text Available Cet article a pour but de déterminer les principaux paramètres qui gouvernent le comportement mécanique des risers de forage et de production, et d'expliquer pourquoi et comment ils interviennent. Une compréhension claire de ces influences permet d'optimiser rapidement un riser donné sans avoir recours à un grand nombre d'analyses par ordinateur. Celui qui conçoit un riser est principalement préoccupé par les points suivants : - niveaux de contraintes dans la partie courante du riser ; - mouvements angulaires à la base du riser (ou moments, dans le cas d'une liaison rigide ; - mouvements relatifs au niveau de la liaison plate-forme/riser. La méthode utilisée dans cet article consiste à établir des expressions analytiques valables pour des risers simplifiés. Les conclusions tirées de ces expressions ont ensuite été verifiéés à l'aide d'un programme de calcul capable de simuler le comportement dynamique d'un riser dans des configurations variées. This paper attempts to identify the principal parameters, that influence the behavior of drilling and production risers and to explain how and why they do so. Clear understanding of these influences enable particular risers to be optimised rapidly without recourse to an inordinate number of computer analyses. The points of greatest concern, to the riser designer, are: a Stress levels in the main length of riser. (b Angular movement at sea bed (or moment, if the connection is rigid. (c Relative movement at riser/platform connection. The approach, used in the paper, has been ta derive analytical expressions, for simplified riser cases. Conclusions drawn from these expressions have then been checked for validity, by using a dynamic analysis computer program to simulate a wide range of cases.

  18. Actinides

    International Nuclear Information System (INIS)

    Martinot, L.; Fuger, J.

    1985-01-01

    The oxidation behavior of the actinides is explained on the basis of their electronic structure. The actinide elements, actinium, thorium, protactinium, uranium, neptunium, plutonium, americium, curium, berkelium, californium, einsteinium, fermium, mendelevium, nobelium, and laurencium are included. For all except the last three elements, the points of discussion are oxidation states, Gibbs energies and potentials, and potential diagram for the element in acid solution; and thermodynamic properties of these same elements are tabulated. References are cited following discussion of each element with a total of 97 references being cited. 13 tables

  19. Liquid state behaviour of semi-conducting materials; Comportement a l'etat liquide des materiaux semiconducteurs

    Energy Technology Data Exchange (ETDEWEB)

    Vandevyver, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    This work is a review of the present state of knowledge concerning the behaviour in the liquid state of materials having semi-conducting properties in the solid state. In the case of many materials it is observed that a 'short-distance order' persists (with modifications) at temperatures above the melting point; this phenomenon is responsible for the semi-conducting properties of certain liquids. A decrease in the mobility of the carriers is generally observed on fusion, whereas the width of the forbidden zone increases: {delta}E{sub g} = {delta}E{sub g1} + {delta}E{sub g2}; {delta}E{sub g1} which is related to the expansion of the crystal is usually positive whereas {delta}E{sub g2} which is related to a change in the short-distance order is negative. According to the relative importance of these two phenomena, {delta}E{sub g} is either positive or negative, involving an increase or a decrease in the semiconducting nature of the material at its melting point. Various examples are presented, in particular that of selenium-tellurium solutions. The experimental study of the electrical properties of liquids comes up against major difficulties (the Hall effect in particular). It is shown nevertheless that the theoretical studies explain semi-quantitatively the known experimental results. (author) [French] Cette etude fait le point sur l'etat actuel des connaissances relatives au comportement a l'etat liquide des materiaux presentant a l'etat solide des proprietes semiconductrices. Dans de nombreux materiaux on observe la persistance (avec modification), d'un 'ordre a courte distance' a des temperatures superieures a celles de la fusion; ceci est a l'origine des proprietes semiconductrices de certains liquides. A la fusion on observe generalement une diminution de la mobilite des porteurs tandis que la largeur de la bande interdite subit un accroissement: {delta}E{sub g} = {delta}E{sub g1} + {delta}E{sub g2}; {delta}E{sub g1

  20. Comportement mécanique du foie en contexte traumatique : Rupture et endommagement des tissus

    OpenAIRE

    CONTE, Cécile

    2012-01-01

    Chaque année en France, on dénombre environ 2000 cas de lésions de la région abdominale lors d'accidents de la route. Ces lésions sont très souvent sévères, mortelles dans 20% des cas, et nécessitent un traitement médical délicat, long et coûteux car il fait appel à la chirurgie dans un cas sur deux. Parmi ces lésions, celles du foie font partie des plus fréquentes mais aussi des plus graves à cause de leur risque hémorragique et sceptique élevé. Une voie d'amélioration de leur prévention pas...

  1. Stimuli de l'environnement, organes des sens et comportement des Monogènes juvéniles et adultes

    Directory of Open Access Journals (Sweden)

    KEARN G. C.

    1993-01-01

    Full Text Available Lorsque les larves de Monogènes (oncomiracidiums établissent leur premier contact avec l'hôte, cela correspond à un changement fondamental dans leur mode de vie. La disparition de quelques structures sensorielles et l'acquisition de nouvelles en témoignent ; mais il existe certainement d'autres types de changements encore inconnus au niveau du système nerveux. Le développement larvaire lui-même, à ce moment là, est initié par des facteurs eux aussi inconnus. Nos connaissances du rôle des facteurs de l'environnement sur la vie des stades parasites juvéniles et adultes sont très limitées. Chez Entobdella soleae, parasite cutané de la Sole, il existe une réponse comportementale au changement de concentration d'oxygène ; chez l'adulte d'Encotyllabe caballeroi, chez qui des yeux se développent chez les post-larves, une réponse nette à la lumière existe. Les yeux persistants que l'on trouve chez d'autres Monogènes adultes, doivent avoir un rôle plus subtil dans le comportement. Le courant d'eau peut influencer le choix du site de fixation ou le développement dissymétrique du hapteur chez les Polyopisthocotylea, mais chez Entobdella soleae, parasite cutané, c'est le premier contact, et non une réponse au courant d'eau qui est déterminant dans l'orientation, la locomotion et éventuellement la migration. Ce contact est aussi certainement important dans la locomotion de certains parasites branchiaux comme Tetraonchus monenteron. L'attraction par des phéromones n'a pas été démontrée chez les Monogènes et l'environnement turbulent de la plupart d'entre eux rend ce mode de communication peu adapté. Cependant, les relations particulières entre E. soleae et son hôte poisson plat procurent une situation où ce phénomène serait possible et avantageux. Bien que les hormones des hôtes apparaissent jouer un rôle dans la biologie de la reproduction des hématophages comme les Polystomes, la démonstration exp

  2. Séquentialisation du comportement des réseaux de Petri temporisés

    Czech Academy of Sciences Publication Activity Database

    Boimond, J.-L.; Komenda, Jan; Lahaye, S.

    2013-01-01

    Roč. 47, 1-3 (2013), s. 139-154 ISSN 1269-6935. [Modélisation des Systèmes Réactifs (MSR) 2013. Rennes, 13.11.2013-15.11.2013] R&D Projects: GA ČR(CZ) GAP103/11/0517 Institutional support: RVO:67985840 Keywords : timed Petri nets * (max,+) automata * race policy Subject RIV: BA - General Mathematics http://jesa.revuesonline.com/article.jsp?articleId=18769

  3. The dynamic behaviour of heat exchangers; Etude du comportement dynamique des echangeurs de chaleur

    Energy Technology Data Exchange (ETDEWEB)

    Fonteray, J; Rozenholc, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    In order to study the dynamics of nuclear power plants, one needs mathematical models made up of ordinary differential equations. This report deals with models for heat exchangers. These models allow exact evaluations of the temperatures for any steady state. The deformation of the temperature maps during transients is taken into account. To do this, average temperatures are evaluated keeping In mind, on one hand the partial differential equations, on the other hand, the physical phenomenons which are involved. Seven ordinary differential equations at most, are necessary for one heat exchanger. Theses models were compared with mathematically exact ones and also with experimental results, that EDF was able to measure on EDF-1 heat exchangers. The results appear to be correct. (authors) [French] Les etudes de dynamique sur les centrales nucleaires exigent l'elaboration de modeles apparaissant sous forme d'equations differentlelles ordinaires. Ce rapport est consacre a la recherche de modeles d'echangeurs. Dans ces modeles les temperatures sont calculees exactement pour n'importe quel regime permanent. Pour tenir compte de la deformation des distributions de temperature en regime transitoire, on evalue les temperatures moyennes dans l'echangeur en s'appuyant, d'une part, sur les equations aux derivees partielles et, d'autre part, sur une analyse des phenomenes physiques. Les modeles contiennent au plus sept equations differentielles ordinaires. Ces modeles ont ete compares aux modeles mathematiques exacts et aussi a des resultats experimentaux, obtenus par l'EDF, sur les echangeurs d'EDF-1. Les resultats paraissent satisfaisants. (auteurs)

  4. Generalities on the dynamic behaviour of rapid reactors. Preliminary studies on Rapsodie; Generalites sur le comportement dynamique des piles rapides. Etudes preliminaires de rapsodie

    Energy Technology Data Exchange (ETDEWEB)

    Campan, J L; Chaumont, J P; Clauzon, P P; Ghesquiere, G; Leduc, J; Schmitt, A P; Zaleski, C P [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1963-07-01

    The study of the dynamic behaviour of fast reactors may be divided into three section: 1. Stability studies around equilibrium power only the linear case was examining. S. Transient studies in the case of usual reactor operation (shut down, scram, etc.) with thermal shocks evaluation, for instance. 3. Explosion studies, for the maximum credible accidents. This report presents the status of the studies performed at the 'Physics Research Department' at Cadarache. Methods used are detailed and illustrated with the results obtained on a preliminary metallic core of the Rapsodie Reactor. (authors) [French] Le comportement dynamique des piles rapides, se presente tout naturellement sous trois aspects: 1. Etude de stabilite autour d'un regime d'equilibre (nous nous sommes bornes ici au cas lineaire). 2. Etude de regimes transitoires lors des operations normales de pile (arret, arret d'urgence, etc.) avec evaluation des chocs thermiques par exemple. 3. Etude des regimes transitoires de caractere explosif lors des accidents les plus graves possibles. Ce rapport presente l'etat des etudes a la date du 20 decembre 1961 a la Section d'Etudes de Piles Rapides a CADARACHE. Les methodes employees ont ete detaillees et illustrees a partir des resultats obtenus sur une premiere version 'combustible metallique' de Rapsodie. (auteurs)

  5. Bases biologiques du comportement social

    CERN Document Server

    Laborit, H

    1994-01-01

    Pour bien comprendre le comportement humain dans un environnement social,il est necessaire de comprendre comment fonctionne le systÂ?me nerveux central. L'une des principales fonctions du cerveau est de crÂ?er des relations entre leshumains.. .................

  6. Comportement mécanique des cavités dans le sel. Etat actuel de nos connaissances Mechanical Behaviour of Salt Cavities. Present State of Our Knowledge

    Directory of Open Access Journals (Sweden)

    Boucly P.

    2006-11-01

    Full Text Available L'utilisation depuis dix ans des premières cavités salines créées sur le site de Tersanne s'est accompagnée d'une réduction de leur volume relativement importante. Cette observation a conduit le Gaz de France à développer d'importantes études sur le comportement rhéologique du sel dans lequel sont creusées les cavités. Ces études, effectuées en collaboration avec des laboratoires universitaires, ont consisté en de nombreux essais en laboratoire (essais de longue durée à la température des terrains visant à déterminer les lois de comportement du matériau. Parallèlement, des modèles de calcul de divers degrés de complexité ont été élaborés afin de prendre en compte ces lois dans l'estimation de la stabilité et de la tenue à long terme de la cavité. Ces études ont abouti récemment à la mise au point d'un premier modèle de comportement du sel qui rend compte de l'ensemble des observations effectuées à ce jour sur les cavités. Grâce à ce modèle, il est maintenant possible d'étudier quelle influence a sur leur volume un type d'utilisation donné des cavités. The exploitation over the last ten years of the first salt cavities created in the Tersanne area has resulted in a relatively large decrease in their volume. This observation led Gaz de France to do extensive research on the rheological behavior of the salt into which cavities are leached. This research, performed in cooperation with university laboratories, consisted of numerous laboratory tests (long-duration tests at formation temperatures to determine the behavior laws of the material. At the same time, models for computing different degrees of complexity were developed to take these laws into account in evaluating the stability and long-term resistance of the cavity. This research has recently resulted in the development of an initial salt-behavior model involving all the observations made concerning these cavities to date. This model can now be

  7. Influence des paramètres matériaux sur le comportement des élastomères Influence of the material parameters on the mechanical properties of rubbers

    Directory of Open Access Journals (Sweden)

    Merckel Yannick

    2013-11-01

    Full Text Available Le comportement sous sollicitations cycliques des matériaux élastomères induit un adoucissement, une déformation rémanente et une anisotropie. Le travail présenté portera sur la caractérisation de ces phénomènes d'endommagements afin d'établir des liens avec les propriétés matériaux. The behavior of rubber-like materials under cyclic loading induces softening, permanent stretch and anisotropy. The aim of the presented work is to characterize such damage in order to introduced relation to material properties.

  8. Comportement des poteaux composites en profils creux en acier remplis de béton Behavior of composite columns in hollow steel section filled with concrete

    Directory of Open Access Journals (Sweden)

    Othmani N.

    2012-09-01

    Full Text Available Le but de cet article, est la determination des rigidites flexionnelles EIx et EIy d’fune section mixte acier beton et plus precisement d’fun poteau en tube d’facier de section rectangulaire, remplie de beton, sollicitee a la flexion bi-axiale (N, Mx et My. L’festimation des rigidites sera faite a partir d’fune approche theorique par une analyse du poteau en elements finis (element barre a 4 degres de liberte, basee sur les conditions d’fequilibres a mi-portee en utilisant la relation moment-courbure (M–Φ de l’felement deforme par application de l’fequation suivante: EI=M/Φ. Le comportement des materiaux est celui comme adopte par les reglements Eurocode 2 et 3, respectivement pour le beton et l’facier. Afin de valider l’fapproche theorique utilisee dans cette etude, deux comparaisons ont ete faites : une premiere permettant de comparer les resultats des rigidites determinees par les relations moments courbures et celles calculees par l’fEurocode 4 et une deuxieme comparaison entre les charges de ruines de deux poteaux de grandeurs natures avec ceux testes au laboratoire [2]. Au vu des resultats obtenus, nous pouvons conclure que l’approche théorique utilisée dans cette étude ainsi que les modèles de comportement des matériaux sont adéquats pour ce genre de problèmes. The purpose of this paper is the determination of flexural stiffness EIx and EIy of a concrete filled rectangular cross section of a composite steel column, under biaxial bending (N, Mx and My. The rigidities will be estimated from a theoretical approach using a finite element analysis (element bar with 4 degrees of freedom, based on the equilibrium conditions at mid-span using the moment-curvature relationships (M–Φ of the deformed element by applying the following equation: EI=M/Φ. The material behavior is the one adopted by Eurocode 2 and 3, respectively, for concrete and steel. To validate the theoretical approach used, two comparisons

  9. ÉTUDE EXPÉRIMENTALE DES COMPORTEMENTS DE CIVELLES D’ANGUILLA ANGUILLA L. INFLUENCE DE LA DENSITÉ ET DE LA DISPONIBILITÉ EN ABRIS

    Directory of Open Access Journals (Sweden)

    BARDONNET A.

    2005-10-01

    Full Text Available Les comportements d’émigration et d’utilisation de l’espace développés par des civelles ont été observés dans des bacs et plans d’eau expérimentaux. Dans les bacs accueillant 55 ind./m2 sans possibilité d’émigration, la densité d’abris végétaux a été contrôlée (densités d’abris basse, 2 tiges de végétation artificielle par bac ou haute, 9 tiges par bac et le suivi a duré 2 mois et demi. Dans les plans d’eau ouverts, la densité de civelles introduites a été définie selon plusieurs modalités (1,6 - 6 - 9 et 12 ind./m2 et le suivi a duré 1 mois et demi. En bacs, après une période de 5 à 6 jours, les abris sont fortement recherchés pendant environ 6 semaines, les individus montrant alors une forte grégarité. Cette dernière disparaît ensuite, les abris sont alors moins recherchés et des comportements agressifs font leur apparition. En plans d’eau, les sorties concernent en moyenne 17 % du stock initial (mini = 7 %, maxi = 35 %, interviennent rapidement et sont presque toutes dirigées vers l’amont. Leur intensité ne dépend pas de la densité initiale et apparaît plus importante dans les bassins sans herbier. Les tailles et poids moyens des émigrants sont plus importants que ceux du lot initial. Au terme du suivi, la croissance apparaît forte, hétérogène et associée à une faible survie dans les plans d’eau peu ou moyennement alevinés. Elle apparaît plus faible, homogène et associée à une bonne survie dans les bassins à forte densité initiale. Ces observations sont compatibles avec l’expression d’un comportement grégaire en condition de densité importante, comportement favorisant une croissance homogène, ayant pour conséquence de retarder l’apparition d’actes agressifs. Au contraire, dans des contextes de faible densité, l’expression rapide du potentiel de croissance de quelques individus favoriserait l’apparition d’actes agressifs.

  10. Lanthanides and actinides extraction by calixarenes containing CMPO groups; Extraction des lanthanides et des actinides au moyen de calixarenes portant des groupements CMPO

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Carrera, A

    2001-07-01

    In the framework of the French program SPIN concerning the radioactive waste management, researches are performed to develop processes allowing the separation of long-lived radioisotopes in order to their transmutation or their specific conditioning. These studies deal with the extraction and the separation of trivalent lanthanides and actinides in acid solution. Many systems ''calixarene-diluent-aqueous phase'' are examined by extraction liquid-liquid and membrane transport. The extraction efficiency and the selectivity of the synthesized calixarene-CMPO and of the CMPO are compared with these cations, as the nitric acid extraction by these molecules. (A.L.B.)

  11. Solubility of actinides and surrogates in nuclear glasses; Solubilite des actinides et de leurs simulants dans les verres nucleaires. Limites d'incorporation et comprehension des mecanismes

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, Ch

    2003-07-01

    The nuclear wastes are currently incorporated in borosilicate glass matrices. The resulting glass must be perfectly homogeneous. The work discussed here is a study of actinide (thorium and plutonium) solubility in borosilicate glass, undertaken to assess the extent of actinide solubility in the glass and to understand the mechanisms controlling actinide solubilization. Glass specimens containing; actinide surrogates were used to prepare and optimize the fabrication of radioactive glass samples. These preliminary studies revealed that actinide Surrogates solubility in the glass was enhanced by controlling the processing temperature, the dissolution kinetic of the surrogate precursors, the glass composition and the oxidizing versus reducing conditions. The actinide solubility was investigated in the borosilicate glass. The evolution of thorium solubility in borosilicate glass was determined for temperatures ranging from 1200 deg C to 1400 deg C.Borosilicate glass specimens containing plutonium were fabricated. The experimental result showed that the plutonium solubility limit ranged from 1 to 2.5 wt% PuO{sub 2} at 1200 deg C. A structural approach based on the determination of the local structure around actinides and their surrogates by EXAFS spectroscopy was used to determine their structural role in the glass and the nature of their bonding with the vitreous network. This approach revealed a correlation between the length of these bonds and the solubility of the actinides and their surrogates. (author)

  12. Molecular and electronic structure of actinide hexa-cyanoferrates; Structure moleculaire et electronique des hexacyanoferrates d'actinides

    Energy Technology Data Exchange (ETDEWEB)

    Bonhoure, I

    2001-07-01

    The goal of this work is to improve our knowledge on the actinide-ligand bond properties. To this end, the hexacyanoferrate entities have been used as pre-organized ligand. We have synthesized, using mild chemistry, the following series of complexes: An{sup IV}[Fe{sup II}(CN){sub 6}].xH{sub 2}O (An = Th, U, Np, Pu); Am{sup III}[Fe{sup III}(CN){sub 6}].xH{sub 2}O; Pu {sup III}[Co{sup III}(CN){sub 6}].xH{sub 2}O and K(H?)An{sup III}[Fe{sup II}(CN){sub 6}].xH{sub 2}O (An = Pu, Am). The metal oxidation states have been obtained thanks to the {nu}{sub CN}, stretching vibration and to the actinide L{sub III} absorption edge studies. As Prussian Blue, the An{sup IV}[Fe{sup II}(CN){sub 6}].xH{sub 2}O (An = Np, Pu) are class II of Robin and Day compounds. X-ray Diffraction has shown besides that these complexes crystallize in the P6{sub 3}/m space group, as the isomorphic LaKFe(CN){sub 6}.4H{sub 2}O complex used as structural model. The EXAFS oscillations at the iron K edge and at the An L{sub III} edge allowed to determine the An-N, An-O, Fe-C and Fe-N distances. The display of the multiple scattering paths for both edges explains the actinide contribution absence at the iron edge, whereas the iron signature is present at the actinide edge. We have shown that the actinide coordination sphere in actinides hexa-cyanoferrates is comparable to the one of lanthanides. However, the actinides typical behavior towards the lanthanides is brought to the fore by the An{sup IV} versus Ln{sup III} ions presence in this family of complexes. Contrarily to the 4f electrons, the 5f electrons influence the electronic properties of the compounds of this family. However, the gap between the An-N and Ln-N distances towards the corresponding metals ionic radii do not show any covalence bond evolution between the actinide and lanthanide series. (author)

  13. Comportement des fondations et des ancrages de structures marines sous l'effet de sollicitations cycliques Behavior of Foundations and Anchors for Marine Structures under the Effect of Cyclic Stresses

    Directory of Open Access Journals (Sweden)

    Le Tirant P.

    2006-11-01

    Full Text Available L'exploration et l'exploitation des hydrocarbures en haute mer conduisent à la mise en place d'ouvrages fixes ou flottants de dimensions de plus en plus colos sales, par des profondeurs d'eau sans cesse croissantes, atteignant actuellement 200 à 300 mètres en production, un millier de mètres en exploration. Les fondations des ouvrages pétroliers de production comprennent essentiel-lement- les pieux ou groupes de pieux, battus ou forés; - les fondations superficielles à embase poids. Le comportement des fondations ou ancrages de structures sous l'action des sollicitations cycliques est étudié, en fonction de la nature des terrains, à partir - de mesures et d'observations sur des structures réelles; d'expérimentations sur des modèles en semi-grandeur ou de simulations sur modèles réduits. Les exemples donnés situent la diversité des problèmes rencontrés pour l'instal-lation des ouvrages en haute mer et! l'ampleur des travaux nécessaires pour décrire plus correctement les phénomènes d'intéraction sols-structures mannes sous l'effet des chargements cycliques et transitoires et, par suite, mieux optimiser le dimensionnement des fondations et des ancrages. Exploration and production of hydrocarbons in the high seas lead ta the installation of fixed or floating structures having more and more colossal sizes at constantly increasing water depths which now attain 200 ta 300 meters for production and 1000 meters for exploration. The foundations of ail production structures mainly consist of - pilings or groups of pilings, either driven or drilled; superficial gravity foundations the behovior of foundations or anchors for such structures under the effect of cyclic stresses is examined as a function of the nature of formations, on the basis of - measurements and observations on actual structures, experiments with semi-full-sized models or by simulations with scale models. The examples given illustrate the diversity of the problems

  14. ETUDE EXPERIMENTALE DE L’INFLUENCE DE LA RIGIDITE STATIQUE DES TOURS SUR LE COMPORTEMENT A L’USURE DES PLAQUETTES EN CARBURE METALLIQUE «NUANCE P25 »

    Directory of Open Access Journals (Sweden)

    L BOULANOUAR

    2002-12-01

    Full Text Available Ce travail consiste à étudier expérimentalement l’influence de quelques machines-outils sur le comportement à l’usure des plaquettes en carbure métalliques. Les essais ont été réalisés dans des conditions opératoires proches de celles industrielles. Les machines-outils utilisées sont caractérisées par leurs rigidités. Le suivi de l’évolution de l’usure des plaquettes en fonction du temps (τ et des éléments du régime de coupe (v, f et d sur chaque machine a été établi conformément à la méthode de planification des expériences. Les résultats obtenus ont été traités, analysés et interprétés physiquement.

  15. Comportement des matériaux organiques vis-à-vis des carburants oxygénés The Behavior of Organic Materials with Regard to Oxygenated Fuels

    Directory of Open Access Journals (Sweden)

    Puisais M.

    2006-11-01

    Full Text Available Les incidences d'emploi des produits oxygénés dans les carburants ont été déterminées sur la tenue des principaux matériaux polymères utilisés dans les véhicules et les équipements de distribution. Des carburants renferment diverses teneurs en éthanol ou en méthanol, éventuellement en conjonction avec des co-solvants tels que le tertiobutanol ou un mélange acétonobutylique ont été examinés. Les méthodes d'essais appliquées ont permis de déterminer le comportement à long terme des matériaux au niveau de leur perméabilité, gonflement, vieillissement, fissuration sous contraintes, extraction et résistance à l'ozone. The effects of using oxygenated products in gasolines have been determined concerning the resistance of the leading polymer materials used in vehicles and distribution equipment. Fuels containing varying amounts of ethanol or methanol, possibly in conjunction with cosolvents such as tertiobutanol or a butanol-acetone mixture, have been examined. The test methods applied have determined the long-term behavior of materials with regard to their permeability, swelling, aging, stress cracking, extraction and ozone resistance.

  16. Le comportement des audités: quel effet sur la qualité de service rendu par les cabinets d’audit au Cameroun ?

    Directory of Open Access Journals (Sweden)

    Léopold Djoutsa Wamba

    2014-09-01

    Full Text Available La présente étude a pour ambition de vérifier s’il existe un lien empirique entre le comportement des audités et la qualité de l’audit au Cameroun. Nous avons à cet effet appréhendé la qualité de l’audit via les qualités de l’auditeur (sa compétence et son indépendance. En s’appuyant sur les analyses de classification et économétriques par la méthode de régression logistique sur des données recueillies par questionnaire auprès de 40 cabinets d’audits présents au Cameroun, les résultats montrent d’une part que la qualité de l’audit est plutôt altérée dans notre contexte. D’autre part, cette étude relève que la probabilité d’avoir un audit de qualité est d’autant plus grande lorsque les honoraires sont négociés à la hausse permanemment et, d’autant plus faible, si l’audité est absent lors du déroulement de la mission, ou s’il accuse des retards dans le paiement des honoraires ou encore, lorsqu’il n’a pas fourni à temps tous les documents nécessaires pour mener à bien la mission.

  17. Concerning the study of the irreversible magnetic behaviour of superconductivity; Contribution a l'etude du comportement magnetique irreversible des supraconducteurs

    Energy Technology Data Exchange (ETDEWEB)

    Kuhn, G [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1965-03-01

    The influence of the presence of extended lattice defects on the magnetic behaviour has been studied for the case of type I superconductors, such as Re and Ta, and in a more quantitative manner for the type II superconductor niobium. In this case, measurements of the thermal conductivity have given an estimate of the relative concentration of lattice defects in each specimen. These measurements show that the larger the number of lattice defects, the more irreversible becomes the magnetization curve, and the larger becomes the values of the critical current, which is related by a simple model to the magnetization values. Finally, a study by transmission electron microscopy has confirmed on the one hand the diversity of the extended lattice defects and on the other hand has allowed the formulation of several hypothesis on their respective influence. [French] L'influence de la presence de defauts etendus sur le comportement magnetique a ete etudie pour des supraconducteurs de premiere espece, tels que le rhenium et le tantale, et plus quantitativement pour un supraconducteur de deuxieme espece, le niobium. Dans ce cas, des mesures de conductibilite thermique ont permis d'estimer la concentration relative des defauts du reseau dans chaque echantillon. Ces mesures montrent que plus les defauts du reseau sont nombreux, plus la courbe d'aimantation est irreversible, et plus les valeurs du courant critique, reliees par un modele simple aux valeurs de l'aimantation, sont elevees. Enfin une etude par microscopie electronique en transmission - a permis d'une part de constater la diversite des defauts etendus et d'autre part de formuler quelques hypotheses sur leurs influences respectives.

  18. Ions behaviour in a wilson chamber with internal self-command; Comportement des ions dans une chambre de wilson a autocommande interne

    Energy Technology Data Exchange (ETDEWEB)

    Laboulaye, H de; Tzara, C; Studinovski, J [Commissariat a l' Energie Atomique, Lab. du Fort de Chatillon, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1952-07-01

    Study, with the help of a self-commanded chamber, of ions behaviors created in this one by a {alpha} particle. The authors put in evidence the phenomenon of multiplication and recover the required conditions for the working of the proportional counters. They verify that the ions reach quickly a steady aggregation state in their gas-steam mixture. These aggregations have a middle mobility of about 0,9 cm{sup 2}.V{sup -1}.sec{sup -1}. They signal an unexpected phenomenon that they assign at a thermodynamic reason. (author) [French] Etude, a l'aide d'une chambre autocommandee, du comportement des ions crees dans celle-ci par une particule {alpha}. Les auteurs mettent en evidence le phenomene de multiplication et retrouvent les conditions requises pour le fonctionnement des compteurs proportionnels. Ils verifient que les ions atteignent rapidement un etat d'agregat stable dans leur melange gaz-vapeur. Ces agregats ont une mobilite moyenne d'environ 0,9 cm{sup 2}.V{sup -1}.sec{sup -1}. Ils signalent un phenomene inattendu qu'ils attribuent a une cause thermodynamique. (auteur)

  19. Ions behaviour in a wilson chamber with internal self-command; Comportement des ions dans une chambre de wilson a autocommande interne

    Energy Technology Data Exchange (ETDEWEB)

    Laboulaye, H. de; Tzara, C.; Studinovski, J. [Commissariat a l' Energie Atomique, Lab. du Fort de Chatillon, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1952-07-01

    Study, with the help of a self-commanded chamber, of ions behaviors created in this one by a {alpha} particle. The authors put in evidence the phenomenon of multiplication and recover the required conditions for the working of the proportional counters. They verify that the ions reach quickly a steady aggregation state in their gas-steam mixture. These aggregations have a middle mobility of about 0,9 cm{sup 2}.V{sup -1}.sec{sup -1}. They signal an unexpected phenomenon that they assign at a thermodynamic reason. (author) [French] Etude, a l'aide d'une chambre autocommandee, du comportement des ions crees dans celle-ci par une particule {alpha}. Les auteurs mettent en evidence le phenomene de multiplication et retrouvent les conditions requises pour le fonctionnement des compteurs proportionnels. Ils verifient que les ions atteignent rapidement un etat d'agregat stable dans leur melange gaz-vapeur. Ces agregats ont une mobilite moyenne d'environ 0,9 cm{sup 2}.V{sup -1}.sec{sup -1}. Ils signalent un phenomene inattendu qu'ils attribuent a une cause thermodynamique. (auteur)

  20. Dynamical behaviour of fast electrons in a crystalline lamella; Comportement dynamique des electrons rapides dans une lamelle cristalline

    Energy Technology Data Exchange (ETDEWEB)

    Perio, Pierre; Tournarie, Max [Commissariat a l' energie atomique et aux energies alternatives - CEA (France)

    1960-07-01

    The substitution of the reciprocal space by a 'mixed space' simplifies the use of the dynamical equation. The Friedel law is preserved. The Ventzel-Kramers-Brillouin-Rayleigh approximation appears as a planar approximation and explains the evolution of some images in electron microscopy. Reprint of a paper published in Comptes rendus des seances de l'Academie des Sciences, t. 249, p. 2218-2220, sitting of 23 November 1959 [French] La substitution d'un 'espace mixte' a l'espace reciproque facilite la manipulation de l'equation dynamique. La loi de Friedel est conservee. L'approximation Ventzel-Kramers-Brillouin-Rayleigh apparait comme une approximation plane et explique l'evolution de certaines images en microscopie electronique. Reproduction d'un article publie dans les Comptes rendus des seances de l'Academie des Sciences, t. 249, p. 2218-2220, seance du 23 novembre 1959.

  1. Chemistry of tetravalent actinides phosphates. The thorium phosphate-diphosphate as immobilisation matrix of actinides; Chimie des phosphates d'actinides tetravalents. Le phosphate-diphosphate de thorium en tant que matrice d'imobilisation des actinides

    Energy Technology Data Exchange (ETDEWEB)

    Dacheux, N

    2002-07-01

    The author presents in this document its scientific works from 1992 to 2001, in order to obtain the enabling to manage scientific and chemical researches at the university Paris Sud Orsay. The first part gives an abstract of the thesis on the characterizations, lixiviation and synthesis of uranium and thorium based phosphate matrix in the framework of the search for a ceramic material usable in the radioactive waste storage. The second part presents briefly the researches realized at the CEA, devoted to a reliable, independent and accurate measure of some isotopes activity. The last part presents the abstracts of researches activities from 1996 to 2001 on the tetravalent actinides phosphates chemistry, the sintering of PDT and solid solutions of PDTU and the kinetic and thermodynamical studies of the PDT dissolution. Many references and some publication in full text are provided. (A.L.B.)

  2. Guide du calcul en mécanique valider le comportement des systèmes techniques

    CERN Document Server

    Spenlé, Daniel

    2012-01-01

    Ce guide couvre l’essentiel des programmes de la Première STI2D aux sections de BTS pour les compétences liées à la mécanique. Pour prendre en compte les nouveautés pédagogiques, cette nouvelle édition évolue vers des systèmes « grand public » (robotique humanoïde, cycle trainer, power-ball…) ou des systèmes liés au développement durable(éolienne, scooter électrique…). Points forts - Un guide qui tient compte des orientations du nouveau programme de STI2D : - systèmes vibratoires ; - accéléromètres, effet gyroscopique ; - développement de l’énergétique. - Les disciplines Génie mécanique/Génie électrique sont décloisonnées: - introduction de dispositifs pluri-techniques ; - présentation d’interfaces liant la partie opérative à la partie commande ; - introduction de la conversion de l’énergie électrique en énergie mécanique et réciproquement, étude comportementale, point de fonctionnement, définition des grandeurs associées. - Le caractère expérimental, ...

  3. Behaviour of rare gases in solids at high temperature; Comportement des gaz rares dans les solides a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Blin, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    In this article a number of simple results regarding the solubility and displacement of rare gases in solids have been assembled. These results were obtained from elementary considerations on highly compressed gases and on dislocations. They provide a better understanding of the now fairly numerous experiments dealing with the swelling of irradiated fuels, this swelling being due to the presence of a high proportion of gases in the fission products. Finally, the chances of success of the various methods which may be devised to diminish the swelling are examined. (author) [French] Nous avons rassemble dans ce texte un certain nombre de resultats simples relatifs a la solubilite et au deplacement des gaz rares dans les solides. Ces resultats ont ete obtenus par des considerations elementaires sur les gaz tres comprimes et sur les dislocations. Ils permettent de mieux comprendre les experiences, maintenant assez nombreuses, qui ont trait au gonflement des combustibles irradies; gonflement qui est du a la presence d'une forte proportion de gaz dans les produits de fission. On examine finalement les chances de succes des differents moyens que l'on peut imaginer pour attenuer le gonflement. (auteur)

  4. Prédiction du comportement à long terme des matériaux polymères

    Science.gov (United States)

    Lemaire, J.

    1998-06-01

    Most of the world activity on research, development and control of polymer durability is still based on empirical techniques developed in the early ages of polymer uses. Those techniques should be critically analysed considering the state of the art in the fundamental understanding of these complex phenomena. A more rational approach is described, especially to predict the lifetime of polymeric materials in environmental conditions. That approach is based on the recognition of the chemical evolution mechanisms. Les activités de recherche, développement et contrôle de durabilité des matériaux polymères sont encore, pour une part très importante, basées sur l'emploi de techniques empiriques dont les principes ont été énoncés dès le début de l'exploitation de ces matériaux. Une analyse critique de ces méthodes s'impose aujourd'hui en tenant compte de l'avancement des connaissances. Une approche plus rationnelle est décrite, approche basée sur la reconnaissance des mécanismes d'évolution chimique. A titre d'exemple, le mécanisme d'évolution du PVC sous contraintes conjuguées de l'UV, de la chaleur et de l'oxygène, est décrit. Des études récentes de photooxydation de polymères conducteurs au sein de polyéthylène sont également succinctement rapportées.

  5. Comportement rhéologique des systèmes mixtes biopolymères / protéines

    Science.gov (United States)

    Rebiha, M.; Moulai-Mostefa, N.; Sadok, A. Hadj; Sabri, N.

    2005-05-01

    Dans ce travail, on s'est intéressé à l'étude des effets du caséinate de sodium et du xanthane sur les propriétés rhéologiques des solutions aqueuses, préparées suivant un plan d'expériences. Les caractéristiques mécaniques obtenues sont traduites par les coefficients du modèle rhéologique de Casson, en l'occurrence la contrainte seuil, τ 0, et la viscosité plastique, η _c. Ainsi, à l'issue de la modélisation en surface de réponses, il apparaît une interaction répulsive à l'échelle structurale entre le caséinate de sodium et le xanthane, traduite par un abaissement considérable de τ 0. Cet baissement de la rigidité peut conduire à une séparation de phases, phénomène conditionné par la viscosité limite de Casson,η _c.

  6. Comportements Sexuels parmi les Adolescents et Jeunes

    African Journals Online (AJOL)

    AJRH Managing Editor

    Cette étude a comme objectif spécifique d'analyser les prévalences des comportements sexuels à risque et leurs facteurs sociaux dans les pays francophones d'Afrique subsaharienne parmi les adolescents et jeunes, en mettant en exergue les diversités entre pays. Les données utilisées sont celles des Enquêtes ...

  7. 44th Journées des Actinides and 10th SPCA. Scientific Programme and Abstracts

    International Nuclear Information System (INIS)

    2014-01-01

    In the opening Session for the 10th SPCA the program of the school will be presented.The sessions of the 10th SPCA are: Physics, Chemistry,Theory, electronic structure,Nuclear forensics, Measuring systems. While the 10th SPCA lectures on crystallography, Physics, Chemistry and basics of actinides research

  8. Comportement de l’uranium et de ses simulants dans les verres d’aluminosilicates en contact avec des métaux fondus

    OpenAIRE

    Chevreux , Pierrick

    2016-01-01

    This study concerns an innovative process used for conditioning nuclear waste that contain metallic parts contaminated with actinides. High actinides concentrations are expected to be incorporated in the glass melt in contact with the molten metals. Among these metals, aluminum and/or stainless steel impose a strongly reducing environment to the glass melt involving redox reactions. These reactions modify actinides oxidation states and therefore change their solubilities in the glass and coul...

  9. Personnel Dosimeters with Radiation Elements; Dosimetres Individuels Comportant des Elements Emetteurs; 0418 041d 0414 0418 0412 0418 0414 ; Dosimetros Individuales Provistos de Elementos Emisores

    Energy Technology Data Exchange (ETDEWEB)

    Hosemann, R.; Warrikhoff, H. F.H. [Fritz-Haber-Institut der Max-Planck-Gesellschaft, Berlin-Dahlem, Federal Republic of Germany (Germany)

    1965-06-15

    'electrons differents par unite d'irradiation. Etant donne que l'une des electrodes emet des electrons ayant une energie elevee, on peut obtenir a l'autre electrode des tensions proportionnelles sans faire appel a une source d'energie auxiliaire. En raison de cette propriete, ces appareils a lecture directe ont recu le nom d'elements emetteurs. Pour mesurer les rayons X ou y, il faut que l'une des electrodes soit en plomb et l'autre en carbone. En vue de rendre l'unite de mesure en roentgen independante de la longueur d'onde, on a utilise la methode des electrons filtres. La sensibilite est de l'ordre de 0, 5 V/r {+-} 8% entre 80 keV et 1, 25 MeV. (L'echelle complete de 200 a 2000 r est soit lineaire, soit quasi-logarithmique.) Pour la mesure des neutrons lents et rapides, l'electrometre incorpore est charge par l'activite 6 induite des electrodes. Il est possible de mesurer les rayons y et les neutrons en rem a l'aide d'un seul instrument. La sensibilite d'un element y aux neutrons peut etre pratiquement reduite a zero, mais celle d'un element neutronique aux rayons y suscite certaines difficultes. Les principaux avantages de ces instruments sont les suivants : 1. Sources d'energie autonomes, toujours pretes a fonctionner, duree d'entreposage illimitee, absence de piles electriques ou autres sources d'alimentation; 2. Evanouissement tres faible du fait que l'fsolement est assure par le vide et le quartz; 3. Mesure quantitative des debits de dose les plus eleves, en raison de l'absence de tout effet de recombinaison (vide) ; 4. Lecture directe ou indirecte, selon les modeles. Dans l'instrument a lecture directe, l'element emetteur et l'electrometre se trouvent dans la meme chambre a vide. L'instrument ne comporte aucun contact electrique a l'exterieur; il doit avoir de preference une forme cylindrique ou spherique. Les dimensions exterieures de l'instrument sont les memes que celles des stylo-dosimetres classiques. Chaque type d'instrument comporte un commutateur de decharge et un

  10. Complexation studies of actinides (U, Pu, Am) with linear polyamino-carboxylate ligands and sidero-chelates; Etudes de la chelation d'actinides (U, Pu, Am) par des ligands polyaminocarboxylate lineaires et des siderochelates d'interet environnemental

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, L.V.

    2010-11-25

    As part of our research endeavour aimed at developing and improving decontamination processes of wastewater containing alpha emitters, physico-chemical complexation studies of actinides (U, Pu, Am) with organic open-chain ligands such as poly-aminocarboxylic acids (H{sub 4}EDTA) and sidero-chelates (di-hydroxamic acids and desferrioxamine B) have been carried out. Gaining a clear understanding of the coordination properties of the targeted actinides is an essential step towards the selection of the most appropriate chelating agents that will exhibit high uptake efficiencies. EXAFS (Extended X-ray Absorption Fine Structure) measurements at the ESRF synchrotron enabled to elucidate the coordination scheme of uranium and plutonium complexes. Solution thermodynamic investigations were intended to provide valuable information about the nature and the stability of the uranium(VI) and americium(III) complexes prevailing at a given pH in solution. The set of stability constants determined from potentiometric and UV-visible spectrophotometric titrations, allowed to predict the speciation of the selected actinides in presence of the aforementioned ligands and to determine the pH range required for achieving 'ultimate' decontamination. (author) [French] Dans le cadre du developpement et de l'amelioration des procedes de decontamination d'effluents aqueux contamines par des radioelements emetteurs alpha, des etudes physico-chimiques sur la complexation des actinides (U, Pu, Am) avec des ligands organiques tels que des acides polyaminocarboxyliques lineaires (H{sub 4}EDTA) et des siderochelates (acides dihydroxamiques et desferrioxamine B) ont ete effectuees. La comprehension des proprietes de coordination est une etape essentielle pour selectionner les meilleurs agents chelatants qui se montreront efficaces dans le traitement des effluents. Les schemas de coordination des complexes d'uranium et de plutonium avec ces ligands ont ete determines a l

  11. Theory of the diffusion coefficient of neutrons in a lattice containing cavities; Theorie du coefficient de diffusion des neutrons dans un reseau comportant des cavites

    Energy Technology Data Exchange (ETDEWEB)

    Benoist, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-01-15

    In an previous publication, a simple and general formulation of the diffusion coefficient, which defines the mode of weighting of the mean free paths of the various media, in introducing the collision probabilities in each medium, was established. This expression is demonstrated again here through a more direct method, and the velocity is introduced; new terms are emphasised, the existence of which implies that the representation of the diffusion area as the mean square of the straight line distance from source to absorption is not correct in a lattice. However these terms are of small enough an order of magnitude to he treated as a correction. The general expression also shows the existence, for the radial coefficient, of the series of angular correlation terms, which is seen to converge very slowly for large channels. The term by term computation which was initiated in the first work was then interrupted and a global formulation, which emphasize a resemblance with the problem of the thermal utilisation factor, was adopted. An integral method, analogous to that use for the computation of this factor, gives the possibility to establish new and simple practical formulae, which require the use of a few basic functions only. These formulae are very accurate, as seen from the results of a variational method which was studied as a reference. Various correction effects are reviewed. Expressions which allow the exact treatment of fuel rod clusters are presented. The theory is confronted with various experimental results, and a new method of measuring the radial coefficient is proposed. (author) [French] Dans une publication anterieure, on a etablie une formulation simple et generale du coefficient de diffusion, qui definit le mode de ponderation des libres parcours des differents milieux constituants en faisant apparaitre les probabilites de collision dans chaque milieu. On redemontre ici cette expression d'une maniere plus directe, tout en introduisant la variable

  12. Theory of the diffusion coefficient of neutrons in a lattice containing cavities; Theorie du coefficient de diffusion des neutrons dans un reseau comportant des cavites

    Energy Technology Data Exchange (ETDEWEB)

    Benoist, P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-01-15

    In an previous publication, a simple and general formulation of the diffusion coefficient, which defines the mode of weighting of the mean free paths of the various media, in introducing the collision probabilities in each medium, was established. This expression is demonstrated again here through a more direct method, and the velocity is introduced; new terms are emphasised, the existence of which implies that the representation of the diffusion area as the mean square of the straight line distance from source to absorption is not correct in a lattice. However these terms are of small enough an order of magnitude to he treated as a correction. The general expression also shows the existence, for the radial coefficient, of the series of angular correlation terms, which is seen to converge very slowly for large channels. The term by term computation which was initiated in the first work was then interrupted and a global formulation, which emphasize a resemblance with the problem of the thermal utilisation factor, was adopted. An integral method, analogous to that use for the computation of this factor, gives the possibility to establish new and simple practical formulae, which require the use of a few basic functions only. These formulae are very accurate, as seen from the results of a variational method which was studied as a reference. Various correction effects are reviewed. Expressions which allow the exact treatment of fuel rod clusters are presented. The theory is confronted with various experimental results, and a new method of measuring the radial coefficient is proposed. (author) [French] Dans une publication anterieure, on a etablie une formulation simple et generale du coefficient de diffusion, qui definit le mode de ponderation des libres parcours des differents milieux constituants en faisant apparaitre les probabilites de collision dans chaque milieu. On redemontre ici cette expression d'une maniere plus directe, tout en introduisant la variable

  13. On the Behaviour of Radioisotopes Incorporated in Glass Blocks; Le Comportement des Radioisotopes Vitrifies; O Povedenii Radioaktivnyh Izotopov, Lokalizovannyh v Steklovidnyh Blokah; Comportamiento de los Radioisotopos Vitrificados

    Energy Technology Data Exchange (ETDEWEB)

    Zimakov, P. V.; Kulichenko, V. V.; Duhovich, F. S.; Salamatmn, B. A.

    1963-02-15

    carefully selected so as to ensure that the radioisotopes remain securely fixed in the buried blocks. In this connection, titanium compounds are especially interesting as fluxes. (author) [French] Etant donne la longue periode de certains radio- isotopes, il est necessaire de les contenir pendant un temps prolonge, en evitant toute fuite; il faut donc etudier leur comportement dans des blocs de verre lors d'une conservation de longue duree: auto-echauffement, irradiation reciproque, influence du milieu ambiant. Si l'on cherche a limiter la dimension des blocs aux fins d'enfouissement, et a reduire la volatilite des radioisotopes en cours de preparation (temperature maximum: 1200'C), on obtient des blocs de structure peu homogene. Ceux-ci se composent d'ailleurs non pas de verre veritable, mais de melanges 'vitreux'. Les proprietes de ces blocs, notamment leur aptitude a fixer d'une facon durable les produits de fission radioactifs, dependent dans une large mesure de leur composition chimique (quantite et nature des fondants), ainsi que des conditions de leur preparation et de leur conservation ulterieure. La chaleur degagee par les blocs fortement radioactifs, dans l'entrepOt souterrain, donne lieu a des modifications chimiques et physiques de leur structure et influe fortement sur la duree de la fixation des produits de fission, notamment pres de la surface des blocs. Le risque de lixiviation s'accroit, en regle generale, loisque la temperature depasse 400UC. Il est donc souhaitable d'eviter la formation de temperatures trop elevees dans les entrepots. D'aune part, la forte densite des rayonnements emis par les blocs influe sensiblement sur la transformation de la structure des blocs et, de ce fait, sur la duree de la fixation des produits de fission qui s'y trouvent. D'ailleurs, ces transformations se produisent avant tout a partir de la surface, au contact du milieu exterieur (air, eau). D'une maniere generale, le risque de lixiviation va croissant. Les experiences ont

  14. Thermal cycling behaviour and thermal stability of uranium-molybdenum alloys of low molybdenum content; Comportement au cyclage thermique et stabilite thermique des alliaces uranium-molybdene de faibles teneurs en molybdene

    Energy Technology Data Exchange (ETDEWEB)

    Decours, J; Fabrique, B; Peault, O [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    We have studied the behaviour during thermal cycling of as-cast U-Mo alloys whose molybdenum content varies from 0.5 to 3 per cent; results are given concerning grain stability during extended heat treatments and the effect of treatments combining protracted heating with thermal cycling. The thermal cycling treatments were carried out at 550, 575, 600 and 625 deg C for 1000 cycles; the protracted heating experiments were done at 550, 575, 600 and 625 deg C for 2000 hours (4000 hrs at 625 deg C). The 0.5 per cent alloy resists much better to the thermal cycling than does the non-alloyed uranium. This resistance is, however, much lower than that of alloys containing over l per cent, even at 550 deg C it improves after a heat treatment for grain-refining. Alloys of over 1.1 per cent have a very good resistance to a cycling treatment even at 625 deg C, and this behaviour improves with increasing concentrations up to 3 per cent. An increase in the temperature up to the {gamma}-phase has few disadvantages provided that it is followed by rapid cooling (50 to 100 deg C/min). The {alpha} grain is fine, the {gamma}-phase is of the modular form, and the behaviour during a thermal cycling treatment is satisfactory. If this cooling is slow (15 deg /hr) the {alpha}-grain is coarse and cycling treatment behaviour is identical to that of the 0.5 per cent alloy. The protracted heat treatments showed that the {alpha}-grain exhibits satisfactory stability after 2000 hours at 575, 600 and 625 deg C, and after 4000 hours at 625 deg C. A heat cycling treatment carried out after these tests affects only very little the behaviour of these alloys during cycling. (authors) [French] Nous avons etudie le comportement au cyclage thermique des alliages U-Mo, brut de coulee, dont la teneur varie de 0,5 a 3 pour cent de molybdene, les resultats de stabilite du grain au cours de traitements thermiques de longue duree, ainsi que ceux des traitements combines de longue duree et de cyclage. Les

  15. La cohérence des comportements professionnels et privés chez les viticulteurs biologiques alsaciens The Coherence of Professional and Private Behaviours among Alsatian Organic Winegrowers

    Directory of Open Access Journals (Sweden)

    Jean Nizet

    2011-02-01

    Full Text Available Cette contribution s’interroge sur la forte cohérence observée au niveau des comportements professionnels et privés d’un petit échantillon de viticulteurs alsaciens que nous avons interviewés longuement. On s’attache d’abord à décrire ces comportements et à identifier les principes à partir desquels les acteurs les justifient. On propose ensuite deux hypothèses susceptibles de rendre compte de la cohérence constatée. La première suggère que cette cohé­rence est en partie construite par le discours des interviewés. La seconde s’interroge sur les mécanismes de socialisation. Trois mécanismes sont iden­tifiés : les tensions identitaires que les personnes ressentent lorsqu’elles s’écar­tent des principes évoqués ; les contrôles, formels et surtout informels, qu’elles exercent les unes sur les autres ; la hiérarchie qui s’instaure dans le champ de la viticulture biologique, en raison précisément de la plus ou moins forte cohé­rence des comportements. On montre que ces mécanismes combinent leurs effets pour produire une socialisation puissante et uniforme, qui fait des viti­culteurs biologiques interviewés des individus beaucoup plus intégrés que ce que prédisent des théories sociologiques qui mettent en avant la diversité, ou encore l’éclatement de l’expérience de l’individu contemporain.This contribution looks at the strong level of coherence observed in the behaviours, both professional and private, of a small sample of Alsatian winegrowers whom we interviewed at length. First there is an attempt at describing these behaviours and identifying the principles by which the actors justify them. We then propose two hypotheses liable to account for the coherence observed. The first suggests that this coherence is in part constructed out of the speech of the interviewees. The second asks about the socialization mechanisms. Three mechanisms are identified : the identitary tensions these

  16. Impact du comportement vibratoire et acoustique des joints de portes et de vitrages sur le bruit d'origine aérodynamique

    OpenAIRE

    Oliver , Clara; Jézéquel , Louis; Besset , Sébastien; VAN HERPE , François; Abbadi , Zouhir

    2015-01-01

    International audience; Dans la modélisation des joints de portes et de vitrages pour la prédiction du bruit aérodynamique il est nécessaire de sortir du domaine classique du calcul vibro-acoustique linéaire, en raison du caractère fortement non-linéaire des joints. La déformation lors de la fermeture des portes ou vitres provoque des modifications des raideurs statique et dynamique, de l'amortissement et de la transparence acoustique des joints. Ensuite les efforts aérodynamiques modifient c...

  17. Safe management of actinides in the nuclear fuel cycle: Role of mineralogy; La gestion des actinides dans le cycle du combustible nucleaire: le role de la mineralogie

    Energy Technology Data Exchange (ETDEWEB)

    Ewing, R.C. [Department of Nuclear Engineering and Radiological Sciences, Department of Geological Sciences, Department of Materials Science and Engineering, University of Michigan, Ann Arbor, Michigan 48109-1005 (United States)

    2011-02-15

    During the past 60 years, more than 1800 metric tonnes of Pu, and substantial quantities of the 'minor' actinides, such as Np, Am and Cm, have been generated in nuclear reactors. Some of these transuranium elements can be a source of energy in fission reactions (e.g., {sup 239}Pu), a source of fissile material for nuclear weapons (e.g., {sup 239}Pu and {sup 237}Np), and of environmental concern because of their long-half lives and radiotoxicity (e.g., {sup 239}Pu and {sup 237}Np). There are two basic strategies for the disposition of these heavy elements: (1) to 'burn' or transmute the actinides using nuclear reactors or accelerators; (2) to 'sequester' the actinides in chemically durable, radiation-resistant materials that are suitable for geologic disposal. There has been substantial interest in the use of actinide-bearing minerals, especially isometric pyrochlore, A{sub 2}B{sub 2}O{sub 7} (A rare earths; B = Ti, Zr, Sn, Hf), for the immobilization of actinides, particularly plutonium, both as inert matrix fuels and nuclear waste forms. Systematic studies of rare-earth pyrochlores have led to the discovery that certain compositions (B = Zr, Hf) are stable to very high doses of alpha-decay event damage. Recent developments in our understanding of the properties of heavy element solids have opened up new possibilities for the design of advanced nuclear fuels and waste forms. (author)

  18. Inorganic Species Behaviour in Thermochemical Processes for Energy Biomass Valorisation Comportement des espèces inorganiques dans les procédés thermochimiques de valorisation énergétique de la biomasse

    Directory of Open Access Journals (Sweden)

    Froment K.

    2013-09-01

    ériaux de lits (en réacteurs à lits fluidisés, les canalisations et l’aval du procédé ne sont pas toujours bien connues. Ces sujets concernant le comportement des espèces inorganiques et les conséquences technologiques et économiques vont probablement prendre de l’importance dans un futur proche en raison de : la tension sur le marché du bois qui augmente ainsi que les prix : une solution est de remplacer cette ressource « noble et propre » qu’est le bois par une ressource plus riche en cendres, comme la paille, les cultures énergétiques dédiées, ou les déchets agricoles voire ménagers. La production de biogaz depuis des décharges de déchets est une bonne illustration de la valorisation de déchets. Aller plus loin dans l’utilisation de ces ressources (conversion thermochimique riches en cendres augmentera leur potentielle réutilisation mais également les difficultés techniques de manière importante! l’enrichissement des sols pour l’agriculture dépend aujourd’hui de la possibilité de réemploi des cendres de biomasse, auxquelles il faut ajouter des fertilisants artificiels. La question de comment réutiliser la matière inorganique de la biomasse après conversion thermochimique devient un sujet important. L’objectif est de présenter une synthèse des difficultés technologiques liées à la présence de ces espèces inorganiques (corrosion, bouchages, etc. : un résumé détaillé du comportement des espèces inorganiques de la biomasse dans les procédés thermiques sera donné, allant des espèces relâchées pendant le traitement de la biomasse jusqu’à la prévention et les solutions quand c’est possible. Les sujets suivants seront développés : inventaires des espèces inorganiques de différentes ressources ; synthèse de la spéciation des espèces inorganiques dans les divers procédés de conversion thermiques ; barrières technologiques à franchir pour des raisons économiques et améliorations technologiques des

  19. Study of the behaviour of organic carbon in the soil, and carbon 14 study of podzols; Contribution a l'etude du comportement du carbone organique dans le sol et etude des podzols a l'aide du carbone 14

    Energy Technology Data Exchange (ETDEWEB)

    Nakhla Shawki, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    Using the penetration into soil of carbon 14 of thermo-nuclear origin, the behaviour and renewal rate were studied on different organic fractions of the soil. It was established that 18% of the total organic matter is renewed in about 400 years. In addition the formation of podzol-type fossil soils in France was dated from the first millenary B.C., i.e. the end of the sub-boreal period and the beginning of the atlantic period. (author) [French] En utilisant la penetration dans le sol du carbone 14 d'origine thermonucleaire, on a etudie le comportement et la vitesse de renouvellement des differentes fractions de la matiere organique du sol. On a pu preciser que 18% de la matiere organique globale se renouvelait en 400 ans environ. Par ailleurs, la formation en France des sols fossiles du type podzol a ete datee du premier millenaire avant J.C. c'est a dire a la fin de la periode subboreale et au debut de la periode atlantique. (auteur)

  20. Les réseaux d'enseignants – Quels sont les comportements rédactionnels des locuteurs ? What are editorial behaviors on French teachers networks?

    Directory of Open Access Journals (Sweden)

    Isabelle Quentin

    2012-10-01

    Full Text Available Depuis une dizaine d'années, des enseignants créent et animent, en dehors des stricts circuits institutionnels, des réseaux d'échanges professionnels en s'appuyant sur les technologies du web participatif. Encore peu étudiés, plusieurs de ces réseaux en ligne connaissent aujourd'hui une forte audience. Cet article a plus spécifiquement pour objet de proposer et de tester une méthode nous permettant de rendre compte des comportements rédactionnels des enseignants qui s'expriment sur les forums hébergés par ces réseaux professionnels. Notre corpus est composé de 91 fils de discussion publiés sur le forum du réseau Pédago2.0. Ce réseau professionnel rassemble près de 500 professeurs en histoire et géographie. La plupart d'entre eux sont fortement investis dans l'association Les Clionautes et peuvent être qualifiés d'enseignants innovants. L'analyse de données quantitatives ainsi que des messages publiés sur le forum Pédago2.0, nous ont permis de mettre en lumière différents modes implicites de fonctionnement que nous présentons dans cet article.Over the past decade, teachers have created and animated corporate networks based on technologies of the Web 2.0 outside the strict institutional hierarchy. Yet little studied, many of these online networks are now welcomed with great success. The aim of this article is to provide a framework enabling us to identify significant aspects of teachers' behavior when they talk on newsgroups hosted through these networks. We tested our framework on a corpus of 91 threads of discussion published on the Pédago2.0 newsgroup. This professional network gathers nearly 500 French history and geography teachers. Most of these teachers are deeply implicated in an association, Les Clionautes, and can be described as innovating teachers. Quantitative data and posted messages analysis allowed us to highlight some implicit functioning rules, which we are presenting in this article.

  1. Données récentes sur le comportement du grand cachalot (Physeter macrocephalus)

    OpenAIRE

    Goddard, Nicolas

    2015-01-01

    Le grand cachalot (Physeter macrocephalus) présente de nombreux comportements caractéristiques. Ces cétacés vivent les ¾ du temps en profondeur et peu de comportements sont directement visibles depuis la surface. Cette thèse bibliographique dresse un bilan sur ce qui est connu du comportement de cette espèce depuis les années 2000. Après avoir présenté les comportements généraux, les différents mouvements des cachalots sont analysés. Les différentes vocalisations, qui sont uniques aux cachalo...

  2. Progrès récents de la connaissance du comportement mécanique des cavités salines Recent Progress in Understanding the Mechanical Behavior of Salt Cavities

    Directory of Open Access Journals (Sweden)

    Fauveau M.

    2006-11-01

    Full Text Available La diminution de volume des cavités salines exploitées à Tersanne depuis quinze ans a conduit le Gaz de France à développer des études sur la rhéologie du sel en collaboration avec des laboratoires universitaires. Ces études ont abouti à la mise au point d'un modèle rhéologique rendant compte des observations effectuées in situ. Simultanément ont été développés, en collaboration avec l'École Nationale Supérieure des Mines de Paris, des modèles numériques qui permettent d'effectuer des simulations du comportement mécanique des cavités. Le plus performant de ces modèles est le code VIPLEF. Validé par une confrontation avec des solutions analytiques et la simulation d'un cas réel (cavité TE O2 de Tersanne, ce programme a permis d'étudier l'influence de la forme d'une cavité sur sa perte de volume et d'ébaucher un critère de choix de forme optimale . Les récentes études ont également permis de mettre en évidence les paramètres qui concourent à la remontée du fond des cavités (gravité, gradient géothermique, stratigraphie, forme de la cavité, etc. , grâce à l'utilisation de ce modèle. De nombreuses intuitions de physiciens ont pu être ainsi confirmées et approfondies par le calcul numérique. The reduction in the geometric volume of the salt cavities used for gas storage at Tersanne, France, for 15 years led Gaz de France to undertake research on the rheology of salt in cooperation with university laboratories. This research led to the development of a rheological model describing in situ observations. At the same time, in collaboration with the Ecole Nationale Supérieure des Mines in Paris, numerical models were developed for simulating the mechanical behavior of cavities. The most effective such model is the VIPLEF code. Checked by comparison with analytical solutions and by simulation of an actual case (TE O2 cavity at Tersanne, this program was used to study the influence of the shape of a cavity on

  3. From the coupling between ion beam analysis techniques and physico-chemical characterization methods to the study of irradiation effects on materials behaviour; Du couplage des techniques d'analyse par faisceaux d'ions et des methodes de caracterisation physico-chimique a l'etude des effets d'irradiation sur le comportement des materiaux

    Energy Technology Data Exchange (ETDEWEB)

    Millard-Pinard, N

    2003-07-01

    The general purpose of my research work is to follow and to interpret the surface evolution of materials, which have received several treatments. During my PhD and my post-doc work, my field of research was tribology. Since I arrived in the 'Aval du Cycle Electronucleaire' group of the Institut de Physique Nucleaire de Lyon, my research activities are in line with the CNRS program 'PACE ' (Programme sur l'Aval du Cycle Electronucleaire) within the ACTINET network. They are coordinated by the PARIS (Physico-chimie des actinides et autres radioelements en solution et aux interfaces) and NOMADE (NOuveaux MAteriaux pour les DEchets) GDR with ANDRA (Agence Nationale pour la gestion des Dechets RAdioactifs), EDF and IRSN (Institut de Radioprotection et de Surete Nucleaire) as partner organisations. My work focused on the study of fission products and actinides migration in barrier materials, which may be capable of assuring the long term safety of deep geological repositories. Until now, it was necessary to use the coupling of ion beam analysis techniques and physico-chemical characterization techniques. During the last few months, I have became interested in understanding radiolytic effects. This new orientation has led us to use ion beams as an irradiating tool. These irradiation experiments are pursued in three major projects. The study of cobalt sulfide inhibition effects of radiolysis gas production during the irradiation of model organic molecules. This is a collaboration with the IRSN, the Institut de Recherche sur la Catalyse and the Ecole Nationale Superieure des Mines de Saint-Etienne. A PhD, co-directed by M. Pijolat from ENSMSE and myself, concerning this study will start in October 2003. Water radiolysis effects on iron corrosion are also studied in the particular case of vitrified nuclear waste containers, which will be stored in deep geological repositories. One ANDRA financed PhD, co-directed by Nathalie Moncoffre and myself, is dedicated to this study

  4. From the coupling between ion beam analysis techniques and physico-chemical characterization methods to the study of irradiation effects on materials behaviour; Du couplage des techniques d'analyse par faisceaux d'ions et des methodes de caracterisation physico-chimique a l'etude des effets d'irradiation sur le comportement des materiaux

    Energy Technology Data Exchange (ETDEWEB)

    Millard-Pinard, N

    2003-07-01

    The general purpose of my research work is to follow and to interpret the surface evolution of materials, which have received several treatments. During my PhD and my post-doc work, my field of research was tribology. Since I arrived in the 'Aval du Cycle Electronucleaire' group of the Institut de Physique Nucleaire de Lyon, my research activities are in line with the CNRS program 'PACE ' (Programme sur l'Aval du Cycle Electronucleaire) within the ACTINET network. They are coordinated by the PARIS (Physico-chimie des actinides et autres radioelements en solution et aux interfaces) and NOMADE (NOuveaux MAteriaux pour les DEchets) GDR with ANDRA (Agence Nationale pour la gestion des Dechets RAdioactifs), EDF and IRSN (Institut de Radioprotection et de Surete Nucleaire) as partner organisations. My work focused on the study of fission products and actinides migration in barrier materials, which may be capable of assuring the long term safety of deep geological repositories. Until now, it was necessary to use the coupling of ion beam analysis techniques and physico-chemical characterization techniques. During the last few months, I have became interested in understanding radiolytic effects. This new orientation has led us to use ion beams as an irradiating tool. These irradiation experiments are pursued in three major projects. The study of cobalt sulfide inhibition effects of radiolysis gas production during the irradiation of model organic molecules. This is a collaboration with the IRSN, the Institut de Recherche sur la Catalyse and the Ecole Nationale Superieure des Mines de Saint-Etienne. A PhD, co-directed by M. Pijolat from ENSMSE and myself, concerning this study will start in October 2003. Water radiolysis effects on iron corrosion are also studied in the particular case of vitrified nuclear waste containers, which will be stored in deep geological repositories. One ANDRA financed PhD, co-directed by Nathalie Moncoffre and myself, is

  5. Behaviour of semiconductor nuclear-particle detectors; Comportement des semi-conducteurs comme detecteurs de particules nucleaires; Povedenie detektorov yadernykh chastits na poluprovodnikakh; Propiedades de los detectores de particulas nucleares a base de semiconductores

    Energy Technology Data Exchange (ETDEWEB)

    Walter, F J; Dabbs, J W.T.; Roberts, L D [Oak Ridge National Laboratory, Oak Ridge, TN (United States)

    1962-04-15

    . Matched expansion-coefficient fabrication techniques which have been successfully used to make detectors up to 8 cm{sup 2} in active area are also described. (author) [French] Les auteurs ont fait des etudes theoriques et experimentales sur le comportement des semi-conducteurs comme detecteurs de particules nucleaires a des temperatures allant de 0,2{sup o} K a 300{sup o} K. Ils presentent un modele theorique simple du comportement du detecteur qui correspond au comportement observe pour toute une gamme de valeurs des parametres. Ils examinent quelle est l'importance de la purete du semi-conducteur et de la tension de polarisation en ce qui concerne l'amplitude de l'impulsion, le temps de montee de l'impulsion et la surface du detecteur. Des etudes empiriques sur le bruit et la resolution en energie montrent que, pour des particules alpha, les plus petites largeurs de crete observees sont tres nettement plus importantes que les largeurs que l'on avait prevues en tenant compte du bruit d'origine electrique provenant du detecteur et de l'amplificateur. A 77{sup o}K, on a releve pour un detecteur a barriere de surface au silicium, d'une surface de 40 mm{sup 2}, des intensites de bruit equivalant a {<=} 3 keV (largeur totale a mi-hauteur du maximum). Les semi-conducteurs presentent un a l'egard des fragments de fission. On a tout lieu de penser que ce defaut n'est pas du a une . Si des champs electriques insuffisants pour assurer une complete sont la cause de ce defaut, le gradient de champ necessaire (a la surface) est superieur a 3 {center_dot} 10{sup 4} V/cm dans le cas de fragments de fission contre 2 {center_dot} 10{sup 3} V/cm dans le cas de particules alpha de Ge et de Si. Des etudes detaillees sur le temps de montee des impulsions au niveau de l'amplificateur ont montre que pour des substances de grande resistivite le temps de relaxation dielectrique et la resistance propres aux substances de base non appauvries peuvent

  6. The reprocessing-recycling of spent nuclear fuel. Actinides separation - Application to wastes management; Le traitement-recyclage du combustible nucleaire use. La separation des actinides - Application a la gestion des dechets

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    After its use in the reactor, the spent fuel still contains lot of recoverable material for an energetic use (uranium, plutonium), but also fission products and minor actinides which represent the residues of nuclear reactions. The reprocessing-recycling of the spent fuel, as it is performed in France, implies the chemical separation of these materials. The development and the industrial implementation of this separation process represent a major contribution of the French science and technology. The reprocessing-recycling allows a good management of nuclear wastes and a significant saving of fissile materials. With the recent spectacular rise of uranium prices, this process will become indispensable with the development of the next generation of fast neutron reactors. This book takes stock of the present and future variants of the chemical process used for the reprocessing of spent fuels. It describes the researches in progress and presents the stakes and recent results obtained by the CEA. content: the separation of actinides, a key factor for a sustainable nuclear energy; the actinides, a discovery of the 20. century; the radionuclides in nuclear fuels; the aquo ions of actinides; some redox properties of actinides; some complexing properties of actinide cations; general considerations about treatment processes; some characteristics of nuclear fuels in relation with their reprocessing; technical goals and specific constraints of the PUREX process; front-end operations of the PUREX process; separation and purification operations of the PUREX process; elaboration of finite products in the framework of the PUREX process; management and treatment of liquid effluents; solid wastes of the PUREX process; towards a joint management of uranium and plutonium: the COEX{sup TM} process; technical options of treatment and recycling techniques; the fuels of generation IV reactors; front-end treatment processes of advanced fuels; hydrometallurgical processes for future fuel

  7. Comportement mécanique des tuyaux. Influence de la traction, de la pression et du poids linéique. Application aux risers Mechanical Behavior of Pipes and Risers. Influence of Tension, Pressure and Weight

    Directory of Open Access Journals (Sweden)

    Sparks C.

    2006-11-01

    Full Text Available L'influence de la traction, de la pression et du poids linéique sur le comportement d'un tuyau (ou d'un riser a déjà été traitée dans de nombreux articles. Malgré cela, elle est fréquemment mal comprise, ce qui a parfois de; conséquences sérieuses. Par souci de clarté, l'approche de cet article est délibérément très élémentaire. Les problèmes principaux de la flexion, du flambage, de l'allongement et de la contrainte limite, qui sont souvent traités dans des articles différents, sont ici étudiés ensemble d'une façon homogène. On présente des interprétation: physiques, faciles à visualiser, des deux concepts de tension effective et de contrainte effective, dont l'utilisation est très répandue, ainsi que leur rapport avec des notions analogues dans d'autres domaines de l'art de l'ingénieur. La puissance de ces deux concepts est démontrée à la fin de l'article où ils sont utilisés pour résoudre huit problèmes divers. The influence of tension, pressure, and weight on different aspects of pipe and riser behavior has already been the subject of many articles (see references. In spite of this it has frequently been misunderstood, sometimes with serious consequences. The object of this payer is to explain the subject clearly and the approach is therefore deliberately very elementary. The principal problems of bending, buckling, yielding and strains, usually treated in separated papers, are here treated homogeneously. The widely used concepts of effective tension and effective stress are given interpretations, easy to visualise, which are related to analogous concepts in other engineering fields. Finally, eight diverse particular examples of the influence of tension, pressure and weight on pipe and riser behavior, are discussed.

  8. Comportement des pots catalytiques en présence de carburants oxygénés Behavior of Catalytic Mufflers in the Presence of Oxygenated Fuels

    Directory of Open Access Journals (Sweden)

    Degobert P.

    2006-11-01

    Full Text Available A partir d'un examen critique de la bibliographie disponible, et après un rappel des répercussions sur les émissions de la présence d'alcools dans les carburants, sont successivement examinées les performances d'épurateurs catalytiques multifonctionnels ou d'oxydation appliqués à des véhicules alimentés avec des carburants dont les teneurs en produits oxygénés varient entre 10 et 100 %. Les performances des catalyseurs s'écartent peu de celles constatées dans le cas de l'essence. Elles restent très bonnes vis-à-vis des polluants non réglementés. Par ailleurs, le pot catalytique n'engendre pas, dans ses conditions normales de fonctionnement, de polluants supplémentaires caractéristiques des combustibles oxygènes utilisés. Based on a critical examination of the literature available and after a review of the effects of the presence of alcools in fuels on emissions, this article successively examines the performances of multifunctional or oxidation catalytic scrubbers applied to vehicles fed with fuels containing between 10 and 100% oxygenated products. The performances of catalysts are not very different from those found with gasoline. They remain very good with regard to pollutants not covered by regulations. Furthermore, under normal operating conditions, a catalytic muffler does not produce any supplementary pollutants characteristic of the oxygenated fuels used.

  9. Selective extraction of actinides by calixarenes: application to bioassay analysis; Extraction selective des actinides par les calixarenes: application a l'analyse radiotoxicologique

    Energy Technology Data Exchange (ETDEWEB)

    Boulet, B

    2006-01-15

    In the context of nuclear workers monitoring, the aim of this PhD was to selectively isolate U, Pu, and Am from urine to propose a new analytical procedure to the Medical and Biology Analysis Laboratories. The 1,3,5-OCH{sub 3}-2,4,6-OCH{sub 2}CONHOH-p-tert-butyl-calix[6]arene molecule has been selected as a promising extractant for U, Pu, and Am. Its physico-chemical properties and its affinity for UO{sub 2}{sup 2+} have been studied through two approaches, one theoretical (molecular modelling at DFT level), and one experimental. The extractions of the three actinides by the hydroxamic calix[6]arene were quantitative in liquid-liquid and solid-liquid systems. Their separation has also been shown possible and efficient. After optimization, the proposed procedure should allow the laboratories to carry out the chemical treatment of urine, before the measurement, in one day instead of the three days needed nowadays. (author)

  10. Long-term behavior of glass-ceramic zirconolite; Etude du comportement a long terme des vitrocristallins a base de zirconolite

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Ch

    2003-07-01

    This work is a part of the investigation of new containment matrices considered for specific conditioning of radionuclides after separation. The aim was to demonstrate the long-term aqueous corrosion resistance of the glass-ceramic zirconolite considered for the conditioning of plutonium and the minor actinides. This material is composed of crystals of zirconolite (CaZrTi{sub 2}O{sub 7}) dispersed in a residual vitreous phase. It appears that glass-ceramic zirconolite presents a better kinetic behavior than the nuclear glass R 7T7. This is mainly due to a more important rate decrease that occurs more rapidly, that induces a quantity of glass altered at least 10 times as small as for R 7T7 glass. This high slowdown of the alteration rate is attributed to the formation of an alteration film that has been the subject of a specific study. We have demonstrated that the rate decrease was controlled as for the R7T7 glass by the amorphous phase of the alteration film forming a diffusion barrier for reactive species. It seems that the porosity is not the single parameter that explains the protective effect of the gel. The main differences compared with R7T7 glass are that silicon does not control the alteration of the material and that the gel is composed of two distinct phases. We have in particular identified a dense phase enriched in titanium and neodymium that probably influences deeply the kinetics. (author)

  11. Bases chimiosensorielles du comportement alimentaire chez les poissons

    OpenAIRE

    Saglio, P.

    1981-01-01

    Le comportement alimentaire, indispensable à la survie de l'individu et donc de l'espèce, occupe à ce titre une position de première importance dans la hiérarchie des comportements fondamentaux qui tous en dépendent très étroitement. Chez les poissons, cette prééminence se trouve illustrée par l'extrême diversité des supports sensoriels impliqués et des expressions comportementales qui leur sont liées. A la suite d'un certain nombre de mises en évidence neurophysiologiques et éthologiques de ...

  12. Dissolution of britholites and monazite / brabantite solid solutions doped with actinides; Etude de la dissolution de britholites et de solutions solides monazite / brabantite dopees avec des actinides

    Energy Technology Data Exchange (ETDEWEB)

    Du Fou De Kerdaniel, E

    2007-12-15

    In the field of the radwaste storage in underground repository, several matrices were considered as promising ceramics for the specific immobilization of actinides. Two of them, britholites and monazite/ brabantite solid solution, have been considered during this work. In order to examine the dissolution mechanisms occurring at the solid liquid interface, several leaching experiments have been conducted on (Ln{sup III}PO{sub 4} ), brabantite (Ca{sup II}An{sup IV}(PO{sub 4}){sub 2}: An = Th, U) and britholites (Ca{sub 9}Nd{sub 0.5}An{sub 0.5}{sup IV} (PO{sub 4}){sub 4.5}(SiO{sub 4}){sub 1.5}F{sub 2}: An = Th, U). Some steady experiments, performed in under saturation conditions for various pH and temperature conditions allowed to evaluate the long term behaviour of such matrices through their chemical durability. On the contrary, the thermodynamic equilibria were examined through the leaching experiments performed near the saturation conditions. By the way, various secondary phases, precipitated onto the surface of altered samples have been identified and characterized. Among them, the (Nd, Ca, Th) - rhabdophane, novelly prepared in over- saturation experiments for a thorium weight loading lower than 11 % appeared to be metastable. Indeed, it turns into TPHPH (Th{sub 2}(PO{sub 4}){sub 2}HPO{sub 4}.H{sub 2}O) and Nd - rhabdophane (NdPO{sub 4}.1/2H{sub 2}O) when increasing leaching time. (author)

  13. Irradiation effects and behaviour of fission products in zirconia and spinel; Effets d'irradiation et comportement des produits de fission dans la zircone et le spinelle

    Energy Technology Data Exchange (ETDEWEB)

    Gentils, A

    2003-10-01

    Crystalline oxides, such as zirconia (ZrO{sub 2}) and spinel (MgAl{sub 2}O{sub 4}), are promising inert matrices for the transmutation of plutonium and minor actinides. This work deals with the study of the physico-chemical properties of these matrices, more specifically their behaviour under irradiation and their capacity to retain fission products. Irradiations at low energy and incorporation of stable analogs of fission products (Cs, I, Xe) into yttria-stabilized zirconia and magnesium-aluminate spinel single crystals were performed by using the ion implanter IRMA (CSNSM-Orsay). Irradiations at high energy were made on several heavy ion accelerators (GANIL-Caen, ISL-Berlin, HIL-Warsaw). The damage induced by irradiation and the release of fission products were monitored by in situ Rutherford Backscattering Spectrometry experiments. Transmission electron microscopy was also used in order to determine the nature of the damage induced by irradiation. The results show that irradiation of ZrO{sub 2} and MgAl{sub 2}O{sub 4} with heavy ions (about hundred keV and about hundred MeV) induces a huge structural damage in crystalline matrices. Total disorder (amorphization) is however never reached in zirconia, contrary to what is observed in the case of spinel. The results also emphasize the essential role played by the concentration of implanted species on their retention capacity. A dramatic release of fission products was observed when the concentration exceeds a threshold of a few atomic percent. Irradiation of implanted samples with medium-energy noble-gas ions leads to an enhancement of the fission product release. The exfoliation of spinel crystals implanted at high concentration of Cs ions is observed after a thermal treatment at high temperature. (author)

  14. Interpretation of the measurement of ions fluxes through a biological membrane with a cellular compartment: example of the movements of sodium through the skin of frogs; Interpretation de la mesure des flux d'ions a travers une membrane biologique comportant un ''compartiment'' cellulaire; exemple des mouvements de sodium a travers la peau de grenouille

    Energy Technology Data Exchange (ETDEWEB)

    Morel, F [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    Two-way ion fluxes which can be measured in vitro through a living epithelial membrane (such as frog skin) by the indicator method take place across the cells which behave like an intermediate ionic 'compartment'. Two membranes and four fluxes have thus to be considered. Measurements in vitro of the total sodium fluxes as a function of the sodium concentration in the medium in contact with the external face of the skin have been interpreted in this spirit. Making use of certain hypotheses, the permeability coefficients for sodium of the two cellular membranes, the four sodium fluxes, the intracellular sodium concentration and the membrane potentials have been calculated for each value of the sodium concentration in the external medium. (author) [French] Les flux ioniques bidirectionnels que l'on peut mesurer in vitro a travers une membrane epitheliale vivante (comme la peau de grenouille) a l'aide de la methode des indicateurs, s'effectuent a travers les cellules qui se comportent comme un 'compartiment' ionique intermediaire. On doit donc considerer deux membranes et quatre flux. Des mesures in vitro des flux totaux de sodium en fonction de la concentration du sodium dans le milieu baignant la face externe de la peau ont ete interpretees dans cette perspective. Moyennant certaines hypotheses, les coefficients de permeabilite pour le sodium des deux membranes cellulaires, les quatre flux de sodium ainsi que la concentration du sodium intracellulaire et les potentiels de membrane ont pu etre calcules pour chaque valeur de la concentration du sodium dans le milieu externe. (auteur)

  15. Bases chimiosensorielles du comportement alimentaire chez les poissons

    Directory of Open Access Journals (Sweden)

    SAGLIO Ph.

    1981-07-01

    Full Text Available Le comportement alimentaire, indispensable à la survie de l'individu et donc de l'espèce, occupe à ce titre une position de première importance dans la hiérarchie des comportements fondamentaux qui tous en dépendent très étroitement. Chez les poissons, cette prééminence se trouve illustrée par l'extrême diversité des supports sensoriels impliqués et des expressions comportementales qui leur sont liées. A la suite d'un certain nombre de mises en évidence neurophysiologiques et éthologiques de l'importance du sens chimique (olfaction, gustation dans le comportement alimentaire des poissons, de très importants secteurs d'études électrophysiologiques et d'analyses physico-chimiques visant à en déterminer la nature exacte (en termes de substances actives se sont développés ces vingt dernières années. De tous ces travaux dont les plus avancés sont présentés ici, il ressort que les acides aminés de série L plus ou moins associés à d'autres composés de poids moléculaires < 1000 constituent des composés chimiques jouant un rôle déterminant dans le comportement alimentaire de nombreuses espèces de poissons carnivores.

  16. Influence of hydrogen on metals behavior. 1 - Mechanical behavior of Ti 6 pc Al 6 pc V 2 pc Sn titanium alloy versus hydrogen: influence of heat treatment and of oxygen content; Influence de l'hydrogene sur le comportement des metaux. 1 - comportement mecanique de l'alliage de titane T A6 V6 E2 vis-a-vis de l'hydrogene: influence du traitement thermique et de la teneur en oxygene

    Energy Technology Data Exchange (ETDEWEB)

    Schaller, Bernard

    1972-06-26

    The mechanical behavior of Ti 6 pc Al 6 pc V Sn alloy during dynamic testing has been investigated versus hydrogen and oxygen content. The hydrogen susceptibility depends only slightly on its microstructure, acicular or equi-axed: it depends much more on conditions of hydrogen contamination and on the thermal history afterward. When the alloy has been stabilized by annealing in {alpha} - {beta} and provided hydrogen absorption does not induce phase transformations, hydrogen sensitivity is relatively low: brittleness occurs suddenly but at a high concentration threshold (2000 ppm H), which coincides with hydrogen saturation of {beta} phase. When the alloy includes unstabilized phases, its response to hydrogen changes whether it has been finally annealed or not, in the 300 - 500 C temperature area, prone to {omega} phase formation. In the absence of such an annealing, a reduction in ductility only occurs at high concentrations (> 1500 ppm H). In the other and, after annealing at 400 C, alloy hardening and a ductility decrease start even at the lowest hydrogen amounts: then hydrogen susceptibility is very high. Low oxygen concentration (up to 2000 ppm) do not sensibly affect the good hydrogen tolerance of this alloy. Beyond 2500 ppm, oxygen, while improving tensile strength, yet severely decreases ductility. [French] Le comportement mecanique de l'alliage TA6-V6-E2 lors d'un essai dynamique a ete etudie en fonction de la teneur en hydrogene et en oxygene. La sensibilite vis-a-vis de l'hydrogene ne depend que tres faiblement de sa structure migrographique, aciculaire ou equiaxe; elle depend bien plus des conditions de contamination par l'hydrogene et de son histoire thermique apres contamination. Lorsque l'alliage a ete stabilise par un recuit dans le domaine biphase, et a condition que l'absorption d'hydrogene n'entraine pas de modification structurale, la sensibilite vis-a-vis de l'hydrogene est relativement faible: la fragilite apparait brutalement mais pour un

  17. Use of Isotopes for Investigating the Behaviour and Ecology of Insect Pests in Some Recent Studies; Emploi des radioisotopes dans des recherches recentes sur le comportement et l'ecologie des insectes nuisibles; Ispol'zovanie radioizotopov dlya issledovaniya povedeniya i ehkologii nasekomykh-vreditelej v Irane; Empleo de isotopos en estudios recientes sobre el comportamiento y la ecologia de las plagas insectiles

    Energy Technology Data Exchange (ETDEWEB)

    Quraishi Sayeed, M. [Cento Institute of Nuclear Science, Teheran (Iran, Islamic Republic of)

    1963-09-15

    Investigations into the ecology, behaviour, dispersal and longevity of insects have always provided challenges to the entomologist. The use of isotopes is an effective tool and the following is a report on some interesting problems solved by their application. Anopheles stephensi is the main vector o f malaria in southern Iran. On P{sup 32}-labelled mosquitoes, the dispersal, behaviour, digestion of blood meal, maturation of ovaries and length of gonotrophic cycles were successfully worked out. It was found that in about 80% of the cases the mosquito needed two blood meals for the completion of the first cycle. The first cycle itself was completed in 4-5 d depending upon the temperature. Labelled mosquitoes which had emerged overnight were released in an isolated village. The ratio of active mosquitoes to total catch was worked out every day and thus, on the assumption that the natural population remained constant, the mortality rate, which was found to be exponential for the first six days, was worked out. The mating behaviour of the female was also studied by using normal females which had mated once with P{sup 32}-labelled males. It was found that the female mates more than once and that after mating with an active male, the spermathead became active. Counts of up to twice the background (12 counts/min) were obtained by using males giving about 15 000 counts/min. Studies of the injection of saliva in glucose solution during feeding were also made on P{sup 32}-labelled mosquitoes. Eurygaster integriceps is a serious pest of wheat in Iran, Pakistan and the Middle East. Using P{sup 32} activated wheat plants, the feeding behaviour of the first-instar nymph was investigated. Other foods, radioactively labelled, were also studied and it was found that feeding was essential for the first moult, even if the food consisted of water absorbed in a filter paper. (author) [French] Les recherches sur l'ecologie, le comportement, la dispersion et la longevite des insectes ont

  18. Thermodynamic study on the complexation of Trivalent actinide and lanthanide cation by N-donor ligands in homogeneous conditions; Etude thermodynamique de la complexation des ions actinide (III) et lanthanide (III) par des ligands polyazotes en milieu homogene

    Energy Technology Data Exchange (ETDEWEB)

    Miguirditchian, M

    2004-07-01

    Polydentate N-donor ligands, alone or combined with a synergic acid, may selectively extract minor actinides(III) from lanthanide(III) ions, allowing to develop separation processes of long-live radioelements. The aim of the researches carried out during this thesis was to better understand the chemical mechanisms of the complexation of f-elements by Adptz, a tridentate N-donor ligand, in homogeneous conditions. A thermodynamic approach was retained in order to estimate, from an energetic point of view, the influence of the different contributions to the reaction, and to acquire a complete set of thermodynamic data on this reaction. First, the influence of the nature of the cation on the thermodynamics was considered. The stability constants of the 1/1 complexes were systematically determined by UV-visible spectrophotometry for every lanthanide ion (except promethium) and for yttrium in a mixed solvent methanol/water in volume proportions 75/25%. The thermodynamic parameters ({delta}H{sup 0} {delta}{sup S}) of complexation were estimated by the van't Hoff method and by micro-calorimetry. The trends of the variations across the lanthanide series are compared with similar studies. The same methods were applied to the study of three actinide(III) cations: plutonium, americium and curium. The comparison of these values with those obtained for the lanthanides highlights the increase of stability of these complexes by a factor of 20 in favor of the actinide cations. This gap is explained by a more exothermic reaction and is associated, in the data interpretation, to a higher covalency of the actinide(III)-nitrogen bond. Then, the influence of the change of solvent composition on the thermodynamic of complexation was studied. The thermodynamic parameters of the complexation of europium(III) by Adptz were determined for several fractions of methanol. The stability of the complex formed increases with the percentage of methanol in the mixed solvent, owing to an

  19. Models for the Behavior of Offshore Structure Foundations. Part Two: Applications to Structural Design and Quality Assurance Processes Modèles pour le comportement des fondations d'ouvrages types marins. Deuxième partie : applications au calcul d'ouvrage et processus d'assurance qualité

    Directory of Open Access Journals (Sweden)

    Meimon Y.

    2006-11-01

    structure. Prospects opened up by the research are discussed. La conception des fondations de grands ouvrages est une tâche complexe qui requiert à la fois l'expérience de l'expert et l'utilisation de modèles numériques adéquats pour assurer la sécurité et optimiser les coûts de dimensionnement. En fait, prévoir le comportement d'une fondation nécessite de bien évaluer les effets combinés de la technique de mise en place, de la variabilité spatiale des propriétés mécaniques, de l'incertitude sur les chargements et des techniques de modélisation du comportement mécanique des géomatériaux. Ceci est particulièrement vrai pour les plates-formes marines, qu'elles soient destinées à l'exploration ou à la production du pétrole, dans la mesure où les chargements non-monotones dus à l'environnement marin, souvent très sévère, peuvent avoir des effets très néfastes sur le comportement de ces structures. On présente, en deux parties, la synthèse d'une dizaine d'années d'activités de recherche, menées par une équipe de l'Institut Français du Pétrole (IFP, en collaboration avec plusieurs équipes universitaires et des centres techniques et industriels, pour la mise au point de méthodologies et d'outils adaptés au calcul du comportement des fondations d'ouvrages types marins durant toute la durée de vie de la plate-forme. Cet article concerne la deuxième partie qui est dévolue à l'application des modèles développés au calcul d'ouvrage par la méthode des éléments finis et à l'exposé d'un processus de validation des modèles, étape d'une démarche d'assurance qualité. Méthodes pour le calcul des fondations marines : Le système de programmes FONDOF utilisant la méthode des éléments finis a été développé. Il comprend (fig. 1. 1 des interfaces interactives de mise en données et de dépouillement des résultats ainsi que des modules de calcul, opérationnels comme FONGEO pour les calculs bi et tridimensionnels ou FONDAX pour le

  20. PUBLICATION D'INFORMATIONS SUR LES RISQUES ET COMPORTEMENT DES INVESTISSEURS : ÉTUDE EMPIRIQUE DE LA POLITIQUE D'INFORMATION DES SOCIÉTÉS FRANÇAISES

    OpenAIRE

    Ghozzi, Khaled

    2005-01-01

    International audience; Selon les travaux de Hamada (1972), Ryan (1997) et Pae (2002), l'incertitude des investisseurs sur la valeur est liée aux sources de risques sectoriels et inhérents. Depuis, peu de travaux se sont intéressées à la relation entre les informations liées aux sources de risques et le marché (Linsmeir et al 2002). Cet article place cette relation dans le cadre de la théorie de publication (Verrecchia 2001) afin d'étudier l'effet des informations liées aux sources et mécanis...

  1. Etude structurale et propriétés des verres peralumineux de conditionnement des produits de fission et actinides mineurs"

    OpenAIRE

    Gasnier , Estelle

    2013-01-01

    In this work, peraluminous glasses (lack of alkaline and alkaline earth ions regarding aluminum) are under study to assess the potentiality of these matrices to confine fission products and minor actinides (FPA) at higher rate than current R7T7 glass (18,5 wt % FPA). The first part of this work aims at studying the physical and chemical properties of complex peraluminous glasses containing increasing FPA rate (18.5 to 32 wt %) to compare them with the specifications. The very low crystallizat...

  2. Elaboration of an Elasto-Plastic Model for High Porosity Chalks. Application to the Compaction of Petroleum Reservoirs Elaboration d'un modèle de comportement élasto-plastique pour les craies très poreuses. Application à la compaction des réservoirs pétroliers

    Directory of Open Access Journals (Sweden)

    Shahrour I.

    2006-11-01

    Full Text Available This paper presents a study of the compaction of petroleum reservoirs applied to very porous carbonate rocks such as chalk. In production estimates made in reservoir engineering, the processing of the mechanical problem is often greatly simplified. Good modelling of how materials behave gives special consideration to the influence of mechanical deformations on fluid recovery. After an analysis of the mechanical behaviour of very porous chalks, an elastoplastic behaviour model is derived so as to reproduce the principal experimental observations. This behaviour model can then be used to perform local simulations of the mechanical behaviour of a reservoir under- going depletion and thus to demonstrate the importance of the stress path and the initial stress state on the deformation of materials and hence on the recovery rate. Dans les applications pétrolières, les études de la compaction des roches réservoirs interviennent dans l'estimation des quantités de fluide récupérables et de la subsidence induite par la déplétion du champ de production. Dans la première partie du travail, nous montrons qu'à partir de l'équation linéarisée de la conservation de la masse de fluide, il est possible d'exprimer un taux de récupération distinguant les contributions respectives du fluide et de la roche. En ingénierie de réservoirs, l'hypothèse d'un chemin de contrainte prépondérant dans le milieu de production permet d'exprimer la contribution de la déformation de la roche au moyen de la compressibilité volumique des pores selon ce chemin. Le taux de récupération obtenu est alors dépendant du chemin de contrainte. Lorsque le chemin de contrainte dans le réservoir n'est pas homogène, il est alors nécessaire de connaître la loi de comportement mécanique du matériau étudié. Dans le cas des carbonates très poreux, nous désirons montrer l'influence liée au choix du chemin de contrainte sur les estimations obtenues par une m

  3. Models for the Behavior of Offshore Structure Foundations. Part One: Methodologies and Rheological Models for Soils Modèles pour le comportement des fondations d'ouvrages types marins. Première partie : Méthodologies et modèles rhéologiques de sols

    Directory of Open Access Journals (Sweden)

    Meimon Y.

    2006-11-01

    structure. Prospects opened up by the research are discussed. La conception des fondations de grands ouvrages est une tâche complexe qui requiert à la fois l'expérience de l'expert et l'utilisation de modèles numériques adéquats pour assurer la sécurité et optimiser les coûts de dimensionnement. En fait, prévoir le comportement d'une fondation nécessite de bien évaluer les effets combinés de la technique de mise en place, de la variabilité spatiale des propriétés mécaniques, de l'incertitude sur les chargements et des techniques de modélisation du comportement mécanique des géomatériaux. Ceci est particulièrement vrai pour les plates-formes marines, qu'elles soient destinées à l'exploration ou à la production du pétrole, dans la mesure où les chargements non-monotones dus à l'environnement marin, souvent très sévère, peuvent avoir des effets très néfastes sur le comportement de ces structures. On présente, en deux parties, la synthèse d'une dizaine d'années d'activités de recherche, menées par une équipe de l'Institut Français du Pétrole (IFP, en collaboration avec plusieurs équipes universitaires et des centres techniques et industriels, pour la mise au point de méthodologies et d'outils adaptés au calcul du comportement des fondations d'ouvrages types marins durant toute la durée de vie de la plate-forme. Cet article concerne la première partie qui est dévolue à l'exposé des démarches développées et à la modélisation de l'état local des géomatériaux par des modèles rhéologiques. Démarches de modélisation du comportement des fondations d'ouvrages marins : On analyse d'abord la spécificité des fondations de plates-formes marines en insistant sur les différences avec les ouvrages à terre : dimension inusitée, chargement aléatoire par les éléments marins. On peut alors dégager plusieurs types de fondation (fig. 2. 1 et 2. 2 et les classes de problèmes qu'il est important d'étudier, qui recouvrent aussi

  4. Actinides-1981

    International Nuclear Information System (INIS)

    1981-09-01

    Abstracts of 134 papers which were presented at the Actinides-1981 conference are presented. Approximately half of these papers deal with electronic structure of the actinides. Others deal with solid state chemistry, nuclear physic, thermodynamic properties, solution chemistry, and applied chemistry

  5. Actinides-1981

    Energy Technology Data Exchange (ETDEWEB)

    1981-09-01

    Abstracts of 134 papers which were presented at the Actinides-1981 conference are presented. Approximately half of these papers deal with electronic structure of the actinides. Others deal with solid state chemistry, nuclear physic, thermodynamic properties, solution chemistry, and applied chemistry.

  6. Temperature behaviour of photo-emissive films. The case of photo-multipliers used in scintillation counters; Comportement en temperature des couches photoemissives. Cas des photomultiplicateurs utilises dans les compteurs a scintillations

    Energy Technology Data Exchange (ETDEWEB)

    Ardalan, A H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-07-01

    This work concerns the changes in the spectral sensitivity of 3 types of normal photo-cathodes (Cs{sub 3}Sb, tri-alkali and bi-alkali without cesium) as a function of temperature. The photo-cathodes of cathodes of commercial photomultipliers (DARIO, E.M.I., R.C.A., A.S.C.O.F.) were used for these tests. The temperature range studied was -25 C to +55 C (except for the bi-alkali photo-cathodes which were tested up to +150 C) and the wave-length range was 3250 to 7000 angstrom. After a brief review of photo-electric effect theories, the experimental device is described and the measurement results presented. Finally, an interpretation of these results is proposed. For the normal range of scintillator emission, i.e. between 3000 and 5000 angstroms (Na I (Tl), plastics, anthracene) the temperature coefficient is always negative: -0.15 % C for Cs{sub 3}Sb and up to -0.5 % C for the most temperature-sensitive photo-cathode. Above 5000 angstrom, the temperature coefficient of Cs{sub 3}Sb films becomes positive: +0.5 % C on the overage. The accuracy of the spectral sensitivity measurements is {+-}4 % in absolute value and {+-}1 % in relative value. (author) [French] Cette etude porte sur la variation de la sensibilite spectrale de 3 types de photocathodes usuelles (Cs{sub 3}Sb, trialcalines et bialcalines sans cesium) en fonction de la temperature. Des photocathodes de photomultiplicateurs du commerce (DARIO, E.M.I., R.C.A., A.S.C.O.P.) ont fait l'objet de ces essais. Le domaine examine s'etendait en temperature de -25 C a +55 C (sauf pour les photocathodes bialcalines qui ont ete portees a une temperature de +150 C) et en longueur d'onde de 3250 a 7000 angstrom. Apres un rappel des theories de l'effet photoelectrique, le dispositif experimental est decrit et les resultats des mesures exposes. Enfin, une interpretation de ces resultats est proposee. Dans le domaine de l'emission des scintillateurs usuels, c'est-a-dire entre 3000 et 5000 angstrom (Na I (Tl), plastiques

  7. Comportements des firmes et commerce international

    OpenAIRE

    Joël Thomas Ravix; Olivier Sautel

    2007-01-01

    Growth of international outsourcing, has been a dominant feature of the international economy. Recent theoretical developments have focused on firm behaviour and its consequences on trade structure, through the introduction of the modern theory of the firm. In a first section, we link this new approach with previous explanations of vertical specialization (intra-industry trade and Multinational Corporation). In a second section, we present methodology and results of these new developments, wh...

  8. Separation by liquid-liquid extraction of actinides(III) from lanthanides(III) using new molecules: the picolinamides; Separation par extraction liquide-liquide des actinides(III) des lanthanides(III) par de nouvelles molecules: les picolinamides

    Energy Technology Data Exchange (ETDEWEB)

    Cordier, P Y [CEA Marcoule, Departement de Recherche en Retraitement et en Vitrification, 30 - Bagnols-sur-Ceze (France); [Clermont-Ferrand-2 Univ., 63 - Aubiere (France)

    1996-07-01

    In the field of long-lived radionuclides separation from waste generated during spent fuel reprocessing, the picolinamides have been chosen as potential extractants for the selective extraction of actinides (III) from lanthanides (III). The first studies initiated on the most simple molecule of the picolinamide family, namely 2-pyridinecarboxamide, pointed out that in an aqueous media the complexation stability constant between this ligand and Am(III) is roughly 10 times higher than the ones corresponding to Ln(III). The synthesis of lipophilic derivatives of 2-pyridinecarboxamide leaded to extraction experiments. The extraction of metallic cation by lipophilic picolinamides, according to a solvatation mechanism, is strongly dependent on the nature of the amide function: a primary amide function (group I) leads to a good extraction; on the contrary, there is a decrease for secondary (group II) and tertiary (group III) amide functions. From a theoretical point of view, this work leads finally to the following conclusions: confirmation of the importance of the presence of soft donor atoms within the extractants (nitrogen in our case) for An(III)/Ln(III). Also, sensitivity of this soft donor atom regarding the protonation reaction; prevalence in our case of the affinity of the extractant for the metallic cation over the lipophilia of the extractant to ensure good distribution coefficients. The extraction and Am(III)/Ln(III) separation performances of the picolinamides from pertechnetic media leads to the design of a possible flowsheet for the reprocessing of high level liquid waste, with the new idea of an integrated technetium reflux. (author) 105 refs.

  9. Afrika Statistika ISSN 2316-090X Comportement de la fonction d ...

    African Journals Online (AJOL)

    Dans le cas o`u la variable observée Xt est retardée de h > 0 et alors st = Xt−h, .... Nous exposons `a la Figure 5 le comportement de l'ACF de quelques séries issues ..... nous effectuons des simulations de Monte-Carlo, d'une part, pour exam-.

  10. Evaluation experimentale et theorique du comportement a la flexion de nouveaux poteaux en materiaux composites

    Science.gov (United States)

    Metiche, Slimane

    La demande croissante en poteaux pour les differents reseaux d'electricite et de telecommunications a rendu necessaire l'utilisation de materiaux innovants, qui preservent l'environnement. La majorite des poteaux electriques existants au Canada ainsi qu'a travers le monde, sont fabriques a partir de materiaux traditionnels tel que le bois, le beton ou l'acier. Les motivations des industriels et des chercheurs a penser a d'autres solutions sont diverses, citons entre autre: La limitation en longueur des poteaux en bois ainsi que la vulnerabilite des poteaux fabriques en beton ou en acier aux agressions climatiques. Les nouveaux poteaux en materiaux composites se presentent comme de bons candidats a cet effet, cependant; leur comportement structural n'est pas connu et des etudes theoriques et experimentales approfondies sont necessaires avant leur mise en marche a grande echelle. Un programme de recherche intensif comportant plusieurs projets experimentaux, analytiques et numeriques est en cours a l'Universite de Sherbrooke afin d'evaluer le comportement a court et a long termes de ces nouveaux poteaux en Polymeres Renforces de Fibres (PRF). C'est dans ce contexte que s'inscrit la presente these, et notre recherche vise a evaluer le comportement a la flexion de nouveaux poteaux tubulaires coniques fabriques en materiaux composites par enroulement filamentaire et ce, a travers une etude theorique, ainsi qu'a travers une serie d'essais de flexion en "grandeur reelle" afin de comprendre le comportement structural de ces poteaux, d'optimiser la conception et de proposer une procedure de dimensionnement pour les utilisateurs. Les poteaux en Polymeres Renforces de Fibres (PRF) etudies dans cette these sont fabriques avec une resine epoxyde renforcee de fibres de verre type E. Chaque type poteaux est constitue principalement de trois zones ou les proprietes geometriques (epaisseur, diametre) et les proprietes mecaniques sont differentes d'une zone a l'autre. La difference

  11. Actinide recycle

    Energy Technology Data Exchange (ETDEWEB)

    Till, C; Chang, Y [Argonne National Laboratory, Argonne, IL (United States)

    1990-07-01

    A multitude of studies and assessments of actinide partitioning and transmutation were carried out in the late 1970s and early 1980s. Probably the most comprehensive of these was a study coordinated by Oak Ridge National Laboratory. The conclusions of this study were that only rather weak economic and safety incentives existed for partitioning and transmuting the actinides for waste management purposes, due to the facts that (1) partitioning processes were complicated and expensive, and (2) the geologic repository was assumed to contain actinides for hundreds of thousands of years. Much has changed in the few years since then. A variety of developments now combine to warrant a renewed assessment of the actinide recycle. First of all, it has become increasingly difficult to provide to all parties the necessary assurance that the repository will contain essentially all radioactive materials until they have decayed. Assurance can almost certainly be provided to regulatory agencies by sound technical arguments, but it is difficult to convince the general public that the behavior of wastes stored in the ground can be modeled and predicted for even a few thousand years. From this point of view alone there would seem to be a clear benefit in reducing the long-term toxicity of the high-level wastes placed in the repository.

  12. Actinide recycle

    International Nuclear Information System (INIS)

    Till, C.; Chang, Y.

    1990-01-01

    A multitude of studies and assessments of actinide partitioning and transmutation were carried out in the late 1970s and early 1980s. Probably the most comprehensive of these was a study coordinated by Oak Ridge National Laboratory. The conclusions of this study were that only rather weak economic and safety incentives existed for partitioning and transmuting the actinides for waste management purposes, due to the facts that (1) partitioning processes were complicated and expensive, and (2) the geologic repository was assumed to contain actinides for hundreds of thousands of years. Much has changed in the few years since then. A variety of developments now combine to warrant a renewed assessment of the actinide recycle. First of all, it has become increasingly difficult to provide to all parties the necessary assurance that the repository will contain essentially all radioactive materials until they have decayed. Assurance can almost certainly be provided to regulatory agencies by sound technical arguments, but it is difficult to convince the general public that the behavior of wastes stored in the ground can be modeled and predicted for even a few thousand years. From this point of view alone there would seem to be a clear benefit in reducing the long-term toxicity of the high-level wastes placed in the repository

  13. 3 and 4 oxidation state element solubilities in borosilicate glasses. Implement to actinides in nuclear glasses; Solubilite des elements aux degres d'oxydation (3) et (4) dans les verres de borosilicate. Application aux actinides dans les verres nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Cachia, J.N

    2005-12-15

    In order to ensure optimal radionuclides containment, the knowledge of the actinide loading limits in nuclear waste glasses and also the comprehension of the solubilization mechanisms of these elements are essential. A first part of this manuscript deals with the study of the differences in solubility of the tri and tetravalent elements (actinides and surrogates) particularly in function of the melting temperature. The results obtained indicate that trivalent elements (La, Gd, Nd, Am, Cm) exhibit a higher solubility than tetravalent elements (Hf, Th, Pu). Consequently, it was planned to reduce plutonium at the oxidation state (III), the later being essentially tetravalent in borosilicate glasses. An innovating reduction process of multi-valent elements (cerium, plutonium) using silicon nitride has been developed in a second part of this work. Reduced plutonium-bearing glasses synthesized by Si{sub 3}N{sub 4} addition made it possible to double the plutonium solubility from 2 to 4 wt% at 1200 deg C. A structural approach to investigate the differences between tri and tetravalent elements was finally undertaken. These investigations were carried out by X-rays Absorption Spectroscopy (EXAFS) and NMR. Trivalent rare earth and actinide elements seem to behave as network modifiers while tetravalent elements rather present true intermediaries' behaviour. (author)

  14. Investigation of actinides speciation within the presence of ligands of interest for decorporation; Etude de la speciation des actinides vis-a-vis de ligands d'interet pour la decorporation

    Energy Technology Data Exchange (ETDEWEB)

    Bonin, L

    2008-01-15

    Data about the behaviour of actinides in biological media are required in order to investigate their decorporation. Those data are obtained through in vivo experiments and the study of chemical speciation of actinides within the presence of biological constituents. A part of this work consists in the development of a method leading to the determination of the speciation of actinides at the oxidation state +IV within the presence of a complexing species, as well as its structure. The method was applied to two types of ligands: 1) a constituent of blood plasma: the citrate anion. The various complexes formed were investigated and their formation constants were quantified. The coordination mode of the ligand was then clarified through a structural study of the complexes, underlining the role of only one carboxylic site and of the alcohol function. 2) chelating agents used for decorporation. The formation constants of complexes of An(IV) with NTA and DTPA were determined. The coordination number of the metallic cation in those complexes as well as the role of the nitrogen atom were proved. Lastly, the behaviour of Pu(IV) within the presence of LIHOPO was investigated. This chelating agent, more efficient than DTPA in the case of in vivo decorporation of Np, forms very stable complexes with the metallic cation. One of those complexes can be assumed to present a stoichiometry 2:3. (author)

  15. Study of the actinide-lanthanide separation from nuclear waste by a new pyrochemical process; Etude de la separation actinides-lanthanides des dechets nucleaires par un procede pyrochimique nouveau

    Energy Technology Data Exchange (ETDEWEB)

    Lemort, F. [CEA Marcoule, Departement de Retraitement, des Dechets et du Demantelement, 30 - Bagnols-sur-Ceze (France)]|[Institut National Polytechnique, 38 - Grenoble (France)

    1997-01-01

    The theoretical extraction and separation of platinoids, actinides and lanthanides is allowed by thermodynamic using two adapted reducing agents: zinc and magnesium. Thereby, a pyrochemical method for the nuclear waste processing has been devised. The high temperature handling of the elements in fluoride forms and their processing by a reactive metallic phase required special precautions. The study of the behavior of matter in exploratory systems allowed the development of an experimental technology for the treatment and contacting of phases. The thermodynamical analysis of the experimental results shows the feasibility of the process. A model was developed to predict the distribution coefficients of zirconium, uranium and lanthanum as a function of the system composition. An estimation method was proposed in order to evaluate the distribution coefficients in diluted solution of all the actinides and lanthanides existing in the fission products between LiF CaF{sub 2} and Zn-Mg at 720 deg C. Coupled with the experimental results, the estimates results may be extrapolated to concentrated solutions allowing predictions of the separation of all actinides and lanthanides. The rapidity of element transfer is induced by a thermal effect caused by the high exothermicity of the reduction by magnesium. The kinetic coefficients have been linked with the reduction enthalpy of each element. Moreover, the kinetics seem limited by chemical reaction and not by mass transfer. (author) 66 refs.

  16. Study of irradiation effects in perovskite: use of this matrix for actinides conditioning; Effets de l'irradiation dans une perovskite: utilisation de cette matrice pour un conditionnement des actinides

    Energy Technology Data Exchange (ETDEWEB)

    Sabathier, C

    2003-07-01

    The aim of this work is to study a specific conditioning matrix (ceramics) for actinides: the strontium titanate. At first, the choice of strontium titanate is discussed as well as its structure and its ability to incorporate actinides. The different studies carried out on the irradiation effects on the strontium titanate are reviewed. The main ion-matter interactions considered in the energy range used during our experiments are given. The different devices and techniques used with ion beams to carry out our experiments according to the type of sample: monocrystal or polycrystal are described. The experimental results on the behaviour of strontium titanate in terms of irradiation, temperature and ion flux used to damage the matrix are presented. The experimental results on the different steps of strontium titanate annealing are given as well as the identifying of the defects by different analyses techniques (Rutherford backscattering spectroscopy, transmission electron spectroscopy and x-rays spectroscopy). At last, a model of the behaviour of the strontium titanate in the case of an actinide conditioning is proposed and the evolving of the strontium titanate disorder during the storage is discussed. (O.M.)

  17. Identification et étude du comportement de quelques additifs des huiles moteurs à base minérale par spectrophotométries IR intégrale et différentielle Identification and Study of the Behavior of Several Additives for Mineral-Bass Motor Oils by Differential and Integral Ir Spectrophotometry

    Directory of Open Access Journals (Sweden)

    Subran C.

    2006-11-01

    Full Text Available L'utilisation d'additifs dans les huiles moteurs est un facteur déterminant pour la longévité et les performances des moteurs. On présente dans cet article quelques procédés d'identification de certains additifs (améliorant d'indice de viscosité, antioxydants, détergents, antimousse, abaisseur du point de congélation en utilisant les méthodes de la spectroscopie IR différentielle et intégrale, l'étude de leur comportement durant l'altération des huiles, le contrôle des dosages dans les huiles neuves. La technique est caractérisée par sa rapidité, par les faibles quantités d'huile prélevées (millilitres, par la possibilité d'un contrôle permanent et d'un diagnostique possible de l'ensemble huile-moteur. The addition of additives to motor oils is one of the main factors in determining the optimum duration of the use of an oil as well as the lifetime and efficiency of an automotive engine. This article describes several processes used for identifying various additives (VI improvers, antioxidant, detergent, antifoaming, pour-point depressant involving differential and integral IR spectroscopy methods. Additive behavior during use is discussed along with how to control dosages in new oils. The technique proposed is characterized by its rapidity, by the small quantities of samples used (milliliters by the possibility of permanent control, and by being able to make a general diagnosis of the oil/engine system.

  18. etude des comportements rheologiques des melanges de farine ble ...

    African Journals Online (AJOL)

    This study was carried out from various mixed sorghum/wheat flour without tannin ... Flour-based bread made tests incorporating 20% of flours from different varieties of ... gluten. Test de Zeleny. Il est réalisé selon les normes ISO 5529 : 2007.

  19. The actinides

    International Nuclear Information System (INIS)

    Bagnall, K.W.

    1987-01-01

    This chapter of coordination compound chemistry is devoted to the actinides and starts with a general survey. Most of the chapter relates to thorium and uranium but protactinium, neptunium and plutonium are included. There are sections on nitrogen, phosphorus, sulfur, selenium, tellurium and halogen ligands of the metals in their +3, +4, +5 and +6 oxidation states and of the transplutonium elements in their +2, +3, +4, and +5 oxidation states. (UK)

  20. Contribution to the study of the behaviour of silicon planar transistors exposed to the {sup 60}Co {gamma} rays; Contribution a l'etude du comportement des transistors silicium a structure plane soumis aux rayons {gamma} du {sup 60}Co

    Energy Technology Data Exchange (ETDEWEB)

    Le Ber, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-05-15

    This report gives an account of studies carried out on bipolar silicon planar transistors irradiated by {sup 60}Co {gamma} rays. The author describes the interactions on the matter of the different types of particles and he gives a brief bibliographical recall of foreign studies. The technological structure of the planar transistors is then described in order to help the understanding of the phenomena, general comments are made about the choice of measured parameters and on the statistical interpretation of results. An automatic instrument for the measurement of the gain is described and the reproducibility of the results is stated The complexity of the problem and the difficulty to predict the behaviour of the semiconductors components are clearly shown. It is stated that the observed dispersions depend on: - the electrical bias during irradiation - the injection level in the emitter-base junction during the measurement - the manufacturer for a given type - the instantaneous dose rate - the geometry used The problem is then examined from the reliability point of view and methods are given to evaluate the reliability for a given dose - 'Worst case' method - moment method - Monte Carlo method. (author) [French] Ce rapport rend compte du travail effectue sur les transistors bipolaires au silicium irradies au rayons {gamma} du cobalt 60. On passe en revue les mecanismes d'interaction des differents rayonnements avec la matiere et on fait un bref rappel bibliographique des etudes effectuees a l'etranger. On decrit ensuite la structure technologique du transistor pour aider a la comprehension des phenomenes, puis on donne des generalites sur le choix des parametres mesures et l'interpretation statistique des resultats. On decrit l'ensemble du systeme de mesure de gain et on s'attache a montrer la reproductibilite des mesures. Les resultats experimentaux mentionnes etablissent clairement la complexite du probleme et la difficulte qu'il y a de faire des previsions. On

  1. New results concerning the behaviour of fission gases in in-pile UO{sub 2} at high temperatures; Resultats nouveaux sur le comportement des gaz de fission a haute temperature dans l'UO{sub 2} en pile

    Energy Technology Data Exchange (ETDEWEB)

    Soulhier, R; Schurenkamper, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The authors consider in the first part the various phenomena giving rise to the production of fission gases towards the exterior of nuclear fuels. The following aspects are dealt with: diffusion, for which is considered the influence of the predecessors of the radioactive gases, the fission recoil, atom expulsion along the fission paths and the evaporation. In the second part the authors present the results obtained on UO{sub 2} samples subjected to irradiation at temperatures of between 150 and 2000 deg C: - At low temperatures the variation of the amount produced as a function of the half-life of the isotopes studied shows that recoil is hot the only cause of gas production. - Above 1800 deg C, a weight loss by evaporation has been observed and the influence of this phenomenon on gas liberation has been studied; thus the fraction of {sup 135}Xe liberated at 2000 deg C by processes other than evaporation is of the order of 10 per cent. - The influence of the various mechanism on the overall effect as a function of temperature is discussed. (authors) [French] Dans une premiere partie, les auteurs etudient les differents phenomenes pouvant donner lieu au degagement des gaz de fission hors d'un combustible. Sont traites successivement: la diffusion, pour laquelle on discute l'influence des predecesseurs des gaz radioactifs, le recul de fission, l'expulsion des atomes le long des trajets de fission et l'evaporation. Dans une deuxieme partie ils exposent les resultats obtenus sur des echantillons d'UO{sub 2} portes sous irradiation a des temperatures comprises entre 150 deg C et 2000 deg C: - A basse temperature la variation de la quantite degagee suivant la periode des isotopes etudies montre que le recul n'est pas la seule cause du degagement des gaz. - Au-dessus de 1800 deg C on a note une perte de poids par evaporation et on a evalue l'influence de ce phenomene sur la liberation des gaz: ainsi la fraction du {sup 135}Xe liberee a 2000 deg C par d'autres processus

  2. Measurements of the neutron capture cross sections and incineration potentials of minor-actinides in high thermal neutron fluxes: Impact on the transmutation of nuclear wastes; Mesures des sections efficaces de capture et potentiels d'incineration des actinides mineurs dans les hauts flux de neutrons: Impact sur la transmutation des dechets

    Energy Technology Data Exchange (ETDEWEB)

    Bringer, O

    2007-10-15

    This thesis comes within the framework of minor-actinide nuclear transmutation studies. First of all, we have evaluated the impact of minor actinide nuclear data uncertainties within the cases of {sup 241}Am and {sup 237}Np incineration in three different reactor spectra: EFR (fast), GT-MHR (epithermal) and HI-HWR (thermal). The nuclear parameters which give the highest uncertainties were thus highlighted. As a result of fact, we have tried to reduce data uncertainties, in the thermal energy region, for one part of them through experimental campaigns in the moderated high intensity neutron fluxes of ILL reactor (Grenoble). These measurements were focused onto the incineration and transmutation of the americium-241, the curium-244 and the californium-249 isotopes. Finally, the values of 12 different cross sections and the {sup 241}Am isomeric branching ratio were precisely measured at thermal energy point. (author)

  3. Hybrid conducting polymer materials incorporating poly-oxo-metalates for extraction of actinides; Materiaux polymeres conducteurs hybrides incorporant des polyoxometallates pour l'extraction d'actinides

    Energy Technology Data Exchange (ETDEWEB)

    Racimor, D

    2003-09-15

    The preparation and characterization of hybrid conducting polymers incorporating poly-oxo-metalates for extracting actinides is discussed. A study of the coordination of various lanthanide cations (Ce(III), Ce(IV), Nd(III)) by the mono-vacant poly-oxo-metalate {alpha}{sub 2}-[P{sub 2}W{sub 17}O{sub 61}]{sup 10-} showed significant differences according to the cation.. Various {alpha}-A-[PW{sub 9}O{sub 34}(RPO){sub 2}]{sup 5-} hybrids were synthesized and their affinity for actinides or lanthanides was demonstrated through complexation. The first hybrid poly-oxo-metallic lanthanide complexes were then synthesized, as was the first hybrid functionalized with a pyrrole group. The electro-polymerization conditions of this pyrrole remain still to be optimized. Poly-pyrrole materials incorporating {alpha}{sub 2}-[P{sub 2}W{sub 17}O{sub 61}]{sup 10-} or its neodymium or cerium complexes as doping agents proved to be the first conducting polymer incorporating poly-oxo-metalates capable of extracting plutonium from nitric acid. (author)

  4. Persistent Memory Effects and the Mid- and Post-Brick Dynamic Behaviour of Three-Way Automotive Catalysts Effets mémoires persistants et comportement dynamique des briques médiane et postérieure de catalyseurs automobiles à trois voies

    Directory of Open Access Journals (Sweden)

    Peyton Jones J.C.

    2011-09-01

    Full Text Available This paper presents the results of an experimental study into the dynamic behaviour of a three-way automotive catalyst and its associated exhaust gas oxygen sensors. Motivated by issues of feedback sensor location, the study seeks to overlay the results of repeat experiments, with sensors and fast-response gas analyzers positioned at different locations, in order to obtain a detailed picture of system dynamics at different points within the catalyst. Initial results demonstrated that the dynamic response of the catalyst can be significantly affected by a persistent memory effect in addition to reversible deactivation dynamics and the familiar oxygen storage/release dynamics of the system. In particular, the effects of prior rich or stoichiometric operation are shown to persist even after extended periods of lean operation. This memory effect is important, not only because of its potential impact on conversion efficiency, but also because of its impact on the repeatability of experiments carried out under what would appear to be near-identical operating conditions. By pre-conditioning under rich conditions highly repeatable experiments were achieved. The results were combined to give a detailed picture of catalyst dynamics at pre-, mid- and post-catalyst locations, and provide insight into catalyst and (non-ideal exhaust gas oxygen sensor behavior. Cet article présente les résultats d’une étude expérimentale en matière de comportement dynamique d’un catalyseur automobile à trois voies et de ses capteurs d’oxygène de gaz d’échappement associés. Motivée par les problèmes de localisation des capteurs de retour d’information, l’étude cherche à corréler les résultats d’expériences répétées, capteurs et analyseurs de gaz à réponse rapide étant disposés en des emplacements différents afin d’obtenir une image détaillée des dynamiques de système en différents points à l’intérieur du catalyseur. Les r

  5. Efficacité d'un exutoire de dévalaison pour smolts de saumon atlantique (Salmo salar L. et comportement des poissons au niveau de l'aménagement hydroélectrique de Camon sur la Garonne

    Directory of Open Access Journals (Sweden)

    CROZE O.

    1999-04-01

    Full Text Available Trois expérimentations ont été conduites de 1996 à 1998 au niveau de la prise d'eau de l'usine hydroélectrique de Camon, sur la Garonne, de manière à tester l'efficacité d'un exutoire de surface destiné aux smolts de saumon atlantique. Ce dispositif de dévalaison est situé en rive gauche, au niveau du plan des grilles. Son efficacité a été évaluée par la méthode de marquage-recapture et le comportement des smolts dans le canal d'amenée a été suivi grâce à la technique de radio-pistage. L'efficacité initiale du dispositif est apparue faible en 1996 (moyenne de 34 % . Le suivi par radio-pistage a révélé que l'emplacement de l'exutoire n'était pas responsable de sa faible efficacité, les poissons stationnant préférentiellement à proximité. Cependant, la présence d'une ascendance masque son entrée. Suite à la mise en place d'une grille de tranquillisation et de platelages horizontaux au niveau de l'entrée de l'exutoire, cette efficacité a été portée à une valeur moyenne de 73 %. De bonnes conditions hydrauliques générales dans le canal d'amenée associées à une hydrodynamique locale favorable aux environs immédiats de l'entrée de l'exutoire s'avèrent indispensables à l'obtention d'une efficacité satisfaisante du dispositif de dévalaison. L'utilisation d'un éclairage nocturne intermittent a non seulement eu un effet sur le comportement des smolts dans le canal d'amenée en maintenant ces derniers dans les zones directement éclairées mais aussi sur les rythmes d'entrée des poissons dans l'exutoire, les passages apparaissant principalement en début d'extinction. La capture de 7 715 salmonidés sauvages a permis d'étudier les rythmes de dévalaison au niveau d'un obstacle. Les pics journaliers de passage semblent liés principalement à de forts débits et/ou à une augmentation de la température de l'eau. L'activité de dévalaison au niveau d'un obstacle apparaît en outre essentiellement

  6. Comportement des métaux et fonctionnement d’un estuaire en zone sub aride : cas de l’estuaire du Souss (côte atlantique Marocaine

    Directory of Open Access Journals (Sweden)

    Elmouden, A.

    2005-04-01

    Full Text Available Selected trace metals (Pb, Zn, Cu, Ni and Cr were studied in surface sediments and cores from the Souss wadi estuary. Trace metal concentrations in riverine and effluent SPM, and in down-the estuary, bed sediments, show that Cr and Ni have a geological origin, while, Pb, Zn and Cu apparently are anthropogenic. The concentration of most metals in down-the estuary sediments diminish in relation to the regional geochemical background by scavenging effects and desorption processes. The vertical distributions of trace metals show an enrichment in finer grained horizons ascribed to the diffusive flux of metals and their retention by the clay-rich layers. The estuary does not constitute a trap for polluting metals as occurs in wet climates. However, the mud flats sedimentary column records a slight increase in polluting elements. The transit of these metals towards the seawater could generate a risk for the aquatic life and for the surrounding beaches.Pour comprendre la distribution et le transfert des métaux lourds à l’interface eau douce - eau salée sous climat sub-aride, les métaux Pb, Zn, Cu, Ni et Cr ont été analysés dans les sédiments superficiels et dans deux carottes prélevées au niveau de la slikke de l’estuaire de l’oued Souss qui est soumis en plus au rejet d’un effluent urbain. La comparaison des concentrations en métaux dans les matières en suspension fluviatiles, celles de l’effluent urbain et dans les sédiments superficiels du bas estuaire montre que Cr et Ni ont une origine lithogénique alors que Pb, Zn et Cu auraient une origine anthropique. Les teneurs de la majorité des métaux montrent un appauvrissement vers l’aval en comparaison avec le fond géochimique naturel. Cet appauvrissement a été expliqué par un phénomène de solubilisation des métaux liés à la phase particulaire et au balayage par les courants de marées des particules sédimentées sur la slikke et appauvries en métaux. La distribution

  7. Low Temperature Rheological Behavior of Umbarka Waxy Crude and Influence of Flow Improver Etude du comportement rhéologique du brut paraffinique d'Umbarka à basse température et de l'influence d'un additif pour l'amélioration des caractéristiques d'écoulement

    Directory of Open Access Journals (Sweden)

    El-Gamal I. M.

    2006-12-01

    Full Text Available The low temperature flow properties; pour point and rheological parameters; have been determined for untreated and additive treated Umbarka waxy crude. The rheological characteristics of the crude showed non-Newtonian yield pseudoplastic flow behavior and pronounced thixotropic effect. Viscometric data are fitted to Bingham, Casson and Herschel-Bulkley plastic flow models using linear and non-linear computer regression analysis. Herschel parameters showed inconsistent results whereas Casson equation fitted the data reasonably well. Treatment of the crude with flow improver ameliorated both rheological properties and pour point but in a different manner. The influence of the additive on the rheology of the crude is greatly affected by shear rate. The thixotropic phenomenon of the crude is likely to be temperature-dependent in addition to the other controlling factors. L'objet de cette étude est de déterminer les caractéristiques du brut paraffinique d'Umbarka, avec et sans additif pour l'amélioration de l'écoulement, à savoir, l'écoulement à basse température, le point d'écoulement, et les données rhéologiques. Les caractéristiques rhéologiques du brut font apparaître un comportement d'écoulement pseudoplastique avec une limite élastique non newtonienne ainsi qu'un effet thixotropique accusé. Une corrélation a été établie entre les données viscométriques et les modèles d'écoulement plastique de Bingham, Casson et Herschel-Bulkley en utilisant une analyse de régression informatique linéaire et non linéaire. Si les paramètres de Herschel conduisent à des résultats incohérents, l'équation de Casson, en revanche, permet d'établir une corrélation raisonnablement satisfaisante des données. Le traitement du brut à l'aide d'un additif d'amélioration de l'écoulement a des répercussions positives, quoique différentes, sur les propriétés rhéologiques et le point d'écoulement. Les effets de l'additif sur la rh

  8. Enlargement of the iliopsoas comportment

    International Nuclear Information System (INIS)

    Garcia, M.; Gonzalez, J.; Martinez, A.; Garcia, M.A.; Relea, A.; Narajo, G.

    1996-01-01

    The iliopsoas or iliopectineal comportment is a normal structure that occasionally communicates with the synovial cavity of the hip. Rarely, in association with certain pathologies that raise the intraarticular pressure, it becomes enlarged, producing an inguinal or pelvic mass, also referred to as iliopsas bursitis. We present five cases of this pathology detected over the past year in our hospitals. Three of the patients had undergone previous vascular punctures in the hip involved, one presented brucellosis-related arthropathy and the fifth had generative joint abnormalities. The plain radiography, arthrography, ultrasound, CT,CT-guided arthrography and MR images are provided and discussed. We present an etiological factor of this process (previous vascular puncture) that has not been previously reported in the literature. 13 refs

  9. The general formulation and practical calculation of the diffusion coefficient in a lattice containing cavities; Formulation generale et calcul pratique du coefficient de diffusion dans un reseau comportant des cavites

    Energy Technology Data Exchange (ETDEWEB)

    Benoist, P [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    The calculation of diffusion coefficients in a lattice necessitates the knowledge of a correct method of weighting the free paths of the different constituents. An unambiguous definition of this weighting method is given here, based on the calculation of leakages from a zone of a reactor. The formulation obtained, which is both simple and general, reduces the calculation of diffusion coefficients to that of collision probabilities in the different media; it reveals in the expression for the radial coefficient the series of the terms of angular correlation (cross terms) recently shown by several authors. This formulation is then used to calculate the practical case of a classical type of lattice composed of a moderator and a fuel element surrounded by an empty space. Analytical and numerical comparison of the expressions obtained with those inferred from the theory of BEHRENS shows up the importance of several new terms some of which are linked with the transparency of the fuel element. Cross terms up to the second order are evaluated. A practical formulary is given at the end of the paper. (author) [French] Le calcul des coefficients de diffusion dans un reseau suppose la connaissance d'un mode de ponderation correct des libres parcours des differents constituants. On definit ici sans ambiguite ce mode de ponderation a partir du calcul des fuites hors d'une zone de reacteur. La formulation obtenue, simple et generale, ramene le calcul des coefficients de diffusion a celui des probabilites de collision dans les differents milieux; elle fait apparaitre dans l'expression du coefficient radial la serie des termes de correlation angulaire (termes rectangles), mis en evidence recemment par plusieurs auteurs. Cette formulation est ensuite appliquee au calcul pratique d'un reseau classique, compose d'un moderateur et d'un element combustible entoure d'une cavite; la comparaison analytique et numerique des expressions obtenues avec celles deduites de la theorie de BEHRENS

  10. Efficacité d'un exutoire de dévalaison pour smolts de saumon atlantique (Salmo salar L. et comportement des poissons au niveau de l'aménagement hydroélectrique de Bedous sur le gave d'Aspe étudiés par la technique de marquage-recapture et par radiotélémétrie

    Directory of Open Access Journals (Sweden)

    CHANSEAU M.

    1999-04-01

    Full Text Available Deux expérimentations ont été conduites en 1995 et 1998 au niveau de la prise d'eau de l'aménagement hydroélectrique de Bedous sur le Gave d'Aspe afin de tester l'efficacité d'un exutoire de dévalaison pour smolts de saumon atlantique (Salmo salar L.. Le dispositif de dévalaison est situé en rive droite à proximité immédiate du plan des grilles. Le débit moyen alimentant l'exutoire a varié au cours de l'étude de 0,4 m3/s à 1,2 m3/s ce qui correspond à 1,6 % à 4,3 % du débit turbiné. Lefficacité du dispositif a été évaluée grâce à la technique de marquage-recapture. Le comportement des smolts dans le canal d'amenée a été suivi par radiotélémétrie. L'efficacité de l'exutoire (moyenne : 17 % s'est révélée très faible en 1995 â cause de conditions hydrauliques défavorables. Un mur déflecteur a été mis en place en 1997 afin de modifier l'écoulement dans le canal et améliorer le guidage des poissons vers l'entrée du dispositif de dévalaison. L'efficacité de l'exutoire est passée à 55 %. Le comportement des poissons à l'amont immédiat des grilles de prise d'eau est très dépendant des conditions hydrodynamiques dans le canal d'amenée. L'efficacité de l'exutoire semble croître avec la longueur des poissons, la proportion des classes de taille inférieures à 19 cm étant plus faible sur les poissons piégés que sur les poissons lâchés. Cette sélection est très certainement liée à l'espacement relativement important des barreaux des grilles de la prise d'eau (30 mm qui malgré le courant tangentiel au plan de grilles demeurent plus perméables aux individus les plus petits. L'éclairage de l'entrée de l'exutoire ne paraît pas avoir d'influence sur les déplacements des poissons radiomarqués dans le canal d'amenée, le facteur hydraulique étant prépondérant. Il modifie cependant les rythmes de passage des poissons par l'exutoire.

  11. Actinide separation by electrorefining

    International Nuclear Information System (INIS)

    Fusselman, S.P.; Gay, R.L.; Grantham, L.F.; Grimmett, D.L.; Roy, J.J.; Inoue, T.; Hijikata, T.; Krueger, C.L.; Storvick, T.S.; Takahashi, N.

    1995-01-01

    TRUMP-S is a pyrochemical process being developed for the recovery of actinides from PUREX wastes. This paper describes development of the electrochemical partitioning step for recovery of actinides in the TRUMP-S process. The objectives are to remove 99 % of each actinide from PUREX wastes, with a product that is > 90 % actinides. Laboratory tests indicate that > 99 % of actinides can be removed in the electrochemical partitioning step. A dynamic (not equilibrium) process model predicts that 90 wt % product actinide content can be achieved through 99 % actinide removal. Accuracy of model simulation results were confirmed in tests with rare earths. (authors)

  12. Correlation and Prediction of Phase Equilibria and Volumetric Behaviour of Hyperbaric Binary Fluids Corrélation et prédiction des équilibres de phases et du comportement volumétrique de fluides hyperbares binaires

    Directory of Open Access Journals (Sweden)

    Stamataki S. K.

    2006-11-01

    Full Text Available The capabilities of cubic Equations of State (EoS in the correlation and the prediction of phase equilibria at hyperbaric conditions is examined. PVT data of pure compounds as well as VLE and volumetric data of binary mixtures up to 2000 bar are used. Correlation and prediction results are presented with the translated and modified Peng-Robinson (t - mPR EoS and EoS/GE models. The performance of cubic EoS with a single interaction parameter (kij in describing VLE is remarkable considering the level of pressures involved. The same is valid for the PVT results including the relative liquid volumes of the C1/nC24 system. With typical errors of about 10% deviations in pressure of 100 - 200 bar are, of course, encountered which can be eliminated by the use of second interaction coefficient in the covolume combining rule. Predicted kij values obtained from generalized correlations developed from low pressure VLE data provide reasonable results for systems with hydrocarbons up to nC16 even at high pressures, but fail for higher asymmetric ones. Volume translation is essential for PVT predictions. The temperature independent translation of t - mPR and that of Jhaveri and Yougren give very satisfactory results. LCVM provides the best results of the EoS/GE models studied and gives very good predictions for rather symmetric systems which become poorer with asymmetric ones at very high pressures. La capacité des équations d'état (EoS cubiques pour corréler et prédire les équilibres de phases en conditions hyperbares est analysée. Les données PVT de corps purs ainsi que les données d'équilibres liquide-vapeur (VLE et volumétriques pour des mélanges binaires, jusqu'à 2000 bar sont utilisées. Les résultats des corrélations et des prédictions sont présentés pour l'équation de Peng-Robinson translatée et modifiée (t - mPR, ainsi que pour les modèles EoS/GE. Les performances des EoS cubiques avec un paramètre d'interaction unique (kij pour

  13. ETUDE DE LA DISTRIBUTION DES CATIONS ECHANGEABLES

    African Journals Online (AJOL)

    SEI Joseph

    D'autre part, à cause de la corrélation directe entre l'étendue des inondations et les quantités de poissons et de pâturages fournies par la plaine, il y a eu dégradation des ... aux changements climatiques en zone sahélienne du Cameroun. Un des objectifs de notre étude était de préciser le comportement des agriculteurs ...

  14. Sol-gel chemistry applied to the synthesis of polymetallic oxides including actinides reactivity and structure from solution to solid state; Synthese par voie douce d'oxydes polymetalliques incluant des actinides: reactivite et structure de la solution au solide

    Energy Technology Data Exchange (ETDEWEB)

    Lemonnier, St

    2006-02-15

    Minor actinides transmutation is studied at present in order to reduce the radiotoxicity of nuclear waste and the assessment of its technical feasibility requires specific designed materials. When considering americium, yttria stabilized zirconia (Am{sup III} YII Zriv)Or{sub x} is among the ceramic phases that one which presents the required physico-chemical properties. An innovative synthesis of this mixed oxide by sol-gel process is reported in this manuscript. The main aim of this work is to adjust the reactivity of the different metallic cations in aqueous media using complexing agent, in order to initiate a favourable interaction for a homogeneous elements repartition in the forming solid phase. The originality of the settled synthesis lies on an in-situ formation of a stable and monodisperse nano-particles dispersion in the presence of acetylacetone. The main reaction mechanisms have been identified: the sol stabilisation results from an original interaction between the three compounds (Zrly, trivalent cations and acetylacetone). The sol corresponds to a structured system at the nanometer scale for which zirconium and trivalent cations are homogeneously dispersed, preliminary to the sol-gel transition. Furthermore, preliminary studies were carried out with a view to developing materials. They have demonstrated that numerous innovative and potential applications can be developed by taking advantage of the direct and controlled formation of the sol and by adapting the sol-gel transition. The most illustrating result is the preparation of a sintered pellet with the composition Am0,13Zro,73Yo,0901,89 using this approach. (author)

  15. Actinide metal processing

    International Nuclear Information System (INIS)

    Sauer, N.N.; Watkin, J.G.

    1992-01-01

    A process for converting an actinide metal such as thorium, uranium, or plutonium to an actinide oxide material by admixing the actinide metal in an aqueous medium with a hypochlorite as an oxidizing agent for sufficient time to form the actinide oxide material and recovering the actinide oxide material is described together with a low temperature process for preparing an actinide oxide nitrate such as uranyl nitrate. Additionally, a composition of matter comprising the reaction product of uranium metal and sodium hypochlorite is provided, the reaction product being an essentially insoluble uranium oxide material suitable for disposal or long term storage

  16. Espace de comportement et espace microgéographique: le jeu de la «Révolution Verte»

    Directory of Open Access Journals (Sweden)

    Peter GOULD

    1987-03-01

    Full Text Available Les relations bidimensionnelles sont examinées entre les joueurs dans l'espace microgéographique de la salle de jeu et dans l'espace de comportement engendré par les interactions qu'ils perçoivent. Les asymétries sont interprétées comme étant des «vents de pauvreté» et des effets de comportement antisocial. L'analyse cartographique combinée à la multidimensionnalité et à la régression euclidienne crée des intuitions sur de simples relations structurelles qui restent à examiner.

  17. Actinide metals

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Paul L. [Geochem Australia, Kiama, NSW (Australia); Ekberg, Christian [Chalmers Univ. of Technology, Goeteborg (Sweden). Nuclear Chemistry/Industrial Materials Recycling

    2016-07-01

    All isotopes of actinium are radioactive and exist in aqueous solution only in the trivalent state. There have been very few studies on the hydrolytic reactions of actinium(III). The hydrolysis reactions for uranium would only be important in alkaline pH conditions. Thermodynamic parameters for the hydrolysis species of uranium(VI) and its oxide and hydroxide phases can be determined from the stability and solubility constants. The hydrolytic behaviour of neptunium(VI) is quite similar to that of uranium(VI). The solubility constant of NpO{sub 2}OH(am) has been reported a number of times for both zero ionic strength and in fixed ionic strength media. Americium can form four oxidation states in aqueous solution, namely trivalent, tetravalent, pentavalent and hexavalent. Desire, Hussonnois and Guillaumont determined stability constants for the species AmOH{sup 2+} for the actinides, plutonium(III), americium(III), curium(III), berkelium(III) and californium(III) using a solvent extraction technique.

  18. Actinide metals

    International Nuclear Information System (INIS)

    Brown, Paul L.; Ekberg, Christian

    2016-01-01

    All isotopes of actinium are radioactive and exist in aqueous solution only in the trivalent state. There have been very few studies on the hydrolytic reactions of actinium(III). The hydrolysis reactions for uranium would only be important in alkaline pH conditions. Thermodynamic parameters for the hydrolysis species of uranium(VI) and its oxide and hydroxide phases can be determined from the stability and solubility constants. The hydrolytic behaviour of neptunium(VI) is quite similar to that of uranium(VI). The solubility constant of NpO 2 OH(am) has been reported a number of times for both zero ionic strength and in fixed ionic strength media. Americium can form four oxidation states in aqueous solution, namely trivalent, tetravalent, pentavalent and hexavalent. Desire, Hussonnois and Guillaumont determined stability constants for the species AmOH 2+ for the actinides, plutonium(III), americium(III), curium(III), berkelium(III) and californium(III) using a solvent extraction technique.

  19. Solid state synthesis and sintering of monazite-type ceramics: application to minor actinides conditioning; Synthese par voie solide et frittage de ceramiques a structure monazite. Application au conditionnement des actinides mineurs

    Energy Technology Data Exchange (ETDEWEB)

    Bregiroux, D

    2005-11-15

    In the framework of the French law of 1991 concerning the nuclear waste management, several studies are undertaken to develop specific crystalline conditioning matrices. Monazite, a rare earth (TR{sup 3+}) orthophosphate with a general formula TR{sup 3+}PO{sub 4}, is a natural mineral containing significant amount of thorium and uranium. Monazite has been proposed as a host matrix for the minor actinides (Np, Am and Cm) specific conditioning, thanks to its high resistance to self irradiation and its low solubility. Its is now of prime importance to check the conservation of these properties on synthesized materials, which implies to master all the stages of the elaboration process, from the powder synthesis to the sintering of controlled microstructure pellets. This work can be divided into two main parts: The first part deals with the synthesis by high temperature solid state route of TR{sup 3+}PO{sub 4} powders (with TR{sup 3+} = La{sup 3+} to Gd{sup 3+}, Pu{sup 3+} and Am{sup 3+}). The chemical reactions occurring during the firing of starting reagents are described in the case of monazite with only one or several cations. From these results, a protocol of synthesis is described. The incorporation of tetravalent cations (Ce{sup 4+}, U{sup 4+}, Pu{sup 4+}) in the monazite structure was also studied. The second part of the present work deals with the elaboration of controlled density and microstructure monazite pellets and their related mechanical and thermal properties. The study of crushing and sintering is presented. For the first time, experimental results are confronted with theoretical models in order to deduce the densification and grain growth mechanisms. By the comprehension of the various physicochemical phenomena occurring during the various stages of the monazite pellets elaboration process (powder synthesis, crushing, sintering...), this work allowed the development of a protocol of elaboration of controlled microstructure monazite TR{sup 3+}PO{sub 4

  20. 50 Modélisation des propriétés diélectriques des nanocomposites ...

    African Journals Online (AJOL)

    AKA BOKO

    3 Laboratoire de Physique des Solides et des Couches Minces, Faculté des Sciences,. Sémlalia ... renfort (fibres de verre, carbone ou Kevlar,..) ont alors été utilisés ... diélectrique. Par ailleurs, pour modéliser le comportement diélectrique à la.

  1. Study of the behaviour of some heavy elements in solvents containing hydrogen fluoride; Etude du comportement de quelques elements lourds dans des solvants a base d'acide fluorhydrique

    Energy Technology Data Exchange (ETDEWEB)

    Tarnero, M [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-01-01

    The anhydrous liquid mixtures: dinitrogen tetroxide-hydrogen fluoride and antimony pentafluoride-hydrogen fluoride were studied as solvents for heavy elements interesting nuclear energy: uranium, thorium, zirconium and for some of their compounds. For N{sub 2}O{sub 4}-HF mixtures, electric conductivity measurements and liquid phase infrared spectra were also obtained. Uranium and zirconium tetrafluoride are much more soluble in N{sub 2}O{sub 4}-HF mixtures than in pure hydrogen fluoride. Uranium dissolved in these mixtures is pentavalent. In SbF{sub 5}-HF mixtures, uranium dissolves with hydrogen evolution and becomes trivalent. The solid compound resulting from the dissolution is a fluoro-antimonate: U(SbF{sub 6}){sub 3}. (author) [French] On a etudie les melanges liquides anhydres: peroxyde d'azote-acide fluorhydrique et pentafluorure d'antimoine-acide fluorhydrique comme solvants d'elements lourds interessant l'energie nucleaire: uranium, thorium, zirconium et de quelques uns de leurs composes. Pour les melanges N{sub 2}O{sub 4}-HF on a egalement effectue des mesures de conductivite electrique, ainsi que des spectres d'absorption infrarouge en phase liquide. Le tetrafluorure d'uranium et le tetrafluorure de zirconium sont beaucoup plus solubles dans les melanges N{sub 2}O{sub 4}-HF que dans l'acide fluorhydrique. L'uranium dissous dans ces melanges est a l'etat pentavalent. Dans les melanges SbF{sub 5}-HF l'uranium se dissout avec degagement d'hydrogene et passe a l'etat trivalent. Le compose solide resultant de la dissolution est un fluoantimoniate: U(SbF{sub 6}){sub 3}. (auteur)

  2. Le rôle des amino-acides dans les processus de l'alimentation et dans l'essaimage des larves des poissons marins

    OpenAIRE

    Dempsey, Clive H.

    1981-01-01

    On sait que les acides aminés provoquent un comportement alimentaire chez les poissons adultes. Il en est de même pour les formes larvaires. Ce type de comportement a été étudié sur des larves de hareng maintenues dans un fluvarium où l'on établissait des gradients de concentration de différents acides aminés ; ceci dans le but de déterminer comment ce type de comportement peut aider les larves à trouver les zones alimentaires et à s'y maintenir. On n'a pu trouver des comportements réflexifs ...

  3. Monazite-type ceramics for the immobilization of minor actinides plutonium; Keramiken des Monazit-Typs zur Immobilisierung von minoren Actinoiden und Plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Heuser, Julia Maria

    2015-07-01

    The safe disposal of radioactive waste in deep geological formations is a challenging task of present and future generations. Innovative strategies as the conditioning of radionuclides in ceramic matrices can make a contribution here. This work points out monazite-type ceramics as potential waste forms for minor actinides and Pu. Several aspects concerning nuclear disposal as well as fundamental structural information were investigated. Lanthanide phosphate endmembers (LnPO{sub 4}) within the stability field of monazite (Ln = La-Gd) were synthesised within the scope of this work. To extend the knowledge of monazite phases, monoclinic TbPO{sub 4}- and DyPO{sub 4}-phases were prepared and characterised. Tb- and Dy-phosphates are situated in the xenotime stability field close to that of monazite. They can exist as metastable monazite phases. Structural characterisations of long- and short-range order were performed by X-ray diffraction, infrared (IR) and Raman spectroscopy. Structural data could be complemented, enhanced and gaps of knowledge could be filled by the first systematic consideration of the complete Ln-monazite-series (Ln = La-Dy). Furthermore, this work focuses on Sm-monazite phases. Samarium with an atomic number of 62 is located in the middle part of the lanthanides showing the monazite structure. Accordingly, it has a mean cationic radius within the Ln-monazite-series and hence shows a relative high flexibility regarding the incorporation of radionuclides with different radii. Sintering densities of SmPO{sub 4} ceramics were optimised by varying process parameters like pressure and number of pressing steps. An irregular texture as well as densities of 94% of the theoretical value could be achieved. The resistance of Sm-monazite against ionising radiation were examined. Radiation damages caused by the α-decay of radionuclides incorporated in a ceramic matrix were simulated by computer calculations and experimentally by heavy ion bombardment of Sm

  4. Contribution to the study of the textures of uranium rods prepared by sintering-extrusion, and their consequences on the thermal cycling behaviour; Contribution a l'etude des textures de barreaux d'uranium mis en forme par frittage-extrusion et leurs consequences sur le comportement au cyclage thermique

    Energy Technology Data Exchange (ETDEWEB)

    Peix, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-11-01

    {alpha} ou {beta} (a divers taux d'extrusion), a partir de poudre legerement oxydee, ont ete soumis a l'epreuve du cyclage thermique. Parallelement, les techniques de dilatometrie et de rayons X ont permis de determiner les textures engendrees dans ces materiaux lors de leur elaboration. Une relation est alors proposee entre texture et allongement par cyclage thermique. 1. Deux types de barreaux ont ete etudies: Frittes-extrudes en phase {beta}: faible densite (88 pour cent densite theorique), gros grains et absence de texture preferentielle; Frittes-extrudes en phase {alpha}: forte densite (96 pour cent densite theorique), grains fins et texture preferentielle prononcee. 2. Apres 1000 cycles thermiques entre 20 C et 550 C les allongements sont les suivants: 2 pour cent pour un uranium fritte-extrude en phase {beta} (avec fissuration de surface); entre 14 et 56 pour cent suivant le taux d'extrusion, pour un uranium fritte-extrude en phase {alpha} (sans alteration de surface). 3. Dans le cas des barreaux frittes-extrudes en phase {alpha} la determination des figures de poles, par la methode de Schulz en reflexion a fait apparaitre deux orientations preferentielles, paralleles a la direction de filage: l'une proche de [100], l'autre proche de [110]. La dilatometrie a ensuite permis de preciser quantitativement la proportion de chaque composante dans la texture d'ensemble, et de mettre en evidence l'augmentation du pourcentage de [100] lorsque le degre d'ecrouissage augmente. 4. Enfin le rapprochement de 2 et 3 montre que les allongements dus au cyclage thermique sont lies au pourcentage des composantes de texture. Il apparait que plus le pourcentage [100] augmente, plus l'allongement diminue. Par contre le comportement de materiaux a fort pourcentage de [110] reste imprecis. (auteur)

  5. Partitioning of the rare earths and actinides between R7T7 nuclear glass alteration products and solution according to disposal conditions; Partage des terres rares et des actinides entre solution et produits d`alteration du verre nucleaire type R7T7 en fonction des conditions de stockage

    Energy Technology Data Exchange (ETDEWEB)

    Menard, O

    1995-10-25

    The alteration of nuclear glass by water is liable to release radionuclides into the environment. Determining the release kinetics of these elements and their aqueous chemical forms are therefore essential steps in establishing the safety of a geological repository site. Leach tests were conducted with a nonradioactive specimen of the French ``R7T7`` light water containment glass spiked with U and Th, and with two R7T7 specimens spiked with {sup 237}Np and {sup 239}Pu, respectively. The alteration solution compositions were representative of deep groundwater and contained carbonate, sulfate, phosphate, fluorine and chlorine ions. The release of U, Th, Np and Pu, as well as of the rare earths La, Ce and Nd were monitored by ICP mass spectrometry and by {alpha} spectrometry. Scanning and transmission electron microscopic examination of the nonradioactive altered glass surfaces was also performed to assess the partitioning balance for the rare earths, U and Th between the glass alteration products and solution. The mobility of these elements depends on two competing mechanisms. The rare earths and thorium are incorporated in the alteration products (gel); the retention process is assumed to involve chemisorption or coprecipitation, enhanced in the gel layer by the presence of phosphate ions in particular. Conversely, the aqueous species in the alteration solutions (mainly anions) form complexes with the actinides and rare earths; this phenomenon is particularly evident with U and Np. The presence of carbonate ions favors this mobility. Plutonium differs from U and Np in that it is adsorbed mainly on colloids formed by glass dissolution, the principal factors governing its chemical evolution in solution. (author). refs., 122 figs., 185 tabs.

  6. Stable and Unstable Behaviour of Preheated Plasma in Linear and Cusped Theta Pinches; Comportement de Plasmas Prechauffes Stables et Instables Soumis a des Strictions Azimutales Lineaires et Cuspidees; Ustojchivoe i neustojchivoe povedenie predvaritel'no nagretoj plazmy v teta-pinch razryadakh s linejnoj i antiprobkovoj geometriej; Comportamiento de Plasmas Precalentados, Estables e Inestables, Sometidos a Constricciones Azimutales de Geometria Lineal y Cuspidal

    Energy Technology Data Exchange (ETDEWEB)

    Belitz, R. J.; Bogen, P.; Dippel, K. H.; Jordan, H. L.; Kugler, E.; Miyahara, A.; Noll, P.; Schlueter, J.; Witulski, H. [Association EURATOM-Kernforschungsanlage, Juelich (Germany)

    1966-04-15

    configurations and relatively insensitive to other parameters, cross-sectional distortions and eruptions depend critically on the initial conditions of the plasma, for example preionization, preheating, inhomogeneities of the conductivity, rate of compression, and very sensitively on small changes in impurity concentration. Under apparently stable conditions reasonably good agreement could be obtained between the maximum values of Doppler temperature for ions, electron temperature and mean temperature taken from pressure balance in high-{beta} plasmas obtained by the 5 kj linear theta pinch. First results obtained in the spindle cusp experiment indicate a stable behaviour of the plasma up to initial gas pressures of 0.5 Torr H{sub 2}2. (author) [French] Le comportement de plasmas d'hydrogene prechauffes soumis a une compression magnetique dans des strictions azimutales de geometrie lineaire et cuspidee a ete etudie dans les cas suivants: 1. Striction azimutale lineaire de 5 kj, bobine 4,5 cm de diametre, longueur 15 cm, B{sub max} = 50 kGT{sub Vulgar-Fraction-One-Half} = 1.5 {mu}sec; 2. Striction azimutale lineaire de 600 kj, bobine 10,5 cm dediametre, longueur 128 cm, B{sub max} = 100 kG, T{sub Vulgar-Fraction-One-Half} = 17 {mu}sec 3. Striction azimutale cuspidee de 10 kj, B{sub max} = 45 kG aux rebroussements, ponctuels et lineaires, rayon 5,2 cm, longueur 8,5 cm. Tous les dispositifs assurent la preionisation par un transmetteur haute frequence de faible puissance a couplage capacitif; un champ magnetique de polarisation de grandeur et de polarite variables; le prechauffage par decharge troidale oscillante et puisee sans electrode; la compression du plasma par une batterie de condensateurs rapides. Des observations ont ete effectuees par diverses methodes: cameras a miroir tournant et a cadrage, interferometrie optique a l'aide d'interferometres Mach-Zehnder et d'interferometres differentiels, spectroscopic dans le domaine visible et dans le domaine des rayons X mous et

  7. Kinetic of liquid-liquid extraction for uranyl nitrate and actinides (III) and lanthanides (III) nitrates by amide extractants; Cinetique d`extraction liquide-liquide du nitrate d`uranyle et des nitrates d`actinides (III) et de lanthanides (III) par des extractants a fonction amide

    Energy Technology Data Exchange (ETDEWEB)

    Toulemonde, V [CEA Centre d` Etudes Nucleaires de Saclay, 91 -Gif-sur-Yvette (France); [CEA Centre d` Etudes de la Vallee du Rhone, 30 -Marcoule (France). Dept. d` Exploitation du Retraitement et de Demantelement

    1995-12-20

    The kinetics of liquid-liquid extraction by amide extractants have been investigated for uranyl nitrate (monoamide extractants), actinides (III) and lanthanides (III) nitrates (diamide extractants). The transfer of the metallic species from the aqueous phase to the organic phase was studied using two experimental devices: ARMOLLEX (Argonne Modified Lewis cell for Liquid Liquid Extraction) and RSC (Rotating Stabilized Cell). The main conclusions are: for the extraction of uranyl nitrate by DEHDMBA monoamide, the rate-controlling step is the complexation of the species at the interface of the two liquids. Thus, an absorption-desorption (according to Langmuir theory) reaction mechanism was proposed; for the extraction of actinides (III) and lanthanides (III) nitrates in nitric acid media by DMDBTDMA diamide, the kinetic is also limited by interfacial reactions. The behavior of Americium and Europium is very similar as fare as their reaction kinetics are concerned. (author). 89 refs.

  8. Thermo-mechanical behavior of bituminous mixtures at low temperatures. Links between the binder characteristics and the mix properties; Comportement thermomecanique des enrobes bitumeux a basses temperatures: relations entre les proprietes du liant et de l'enrobe

    Energy Technology Data Exchange (ETDEWEB)

    Olard, F.

    2003-10-01

    This thesis has been realized within the framework of a partnership between the Ecole Nationale des TPE, APPIA and EUROVIA. The company Total has also been associated to this project. The study deals with the thermo-mechanical behavior of bituminous materials at low temperatures. The aim is to establish the links between the characteristics of the binder and the properties of bituminous mixes at low temperatures, and to better understand the existing low-temperature parameters and criteria for binders (or to propose new ones), related to the in-situ behavior of bituminous mixtures. A large experimental campaign has been carried out so as to fulfill this goal. After a bibliographical study on the rheology and the thermo-mechanical properties of (pure or modified) binders, putties and mixes, the experimental campaign carried out both in the small strain domain and in the large strain domain, is presented. The low temperature behavior of binders has been evaluated with three common fundamental tests: i)the complex modulus determination, ii)the Bending Beam Rheometer and iii)the tensile strength at a constant strain rate and constant temperatures. A new three point bending test on pre-notched bitumen beams has also been developed at the ENTPE. The low-temperature fracture properties of bitumens were studied at constant temperatures and cross-head speeds considering the Linear Elastic Fracture Mechanics (LEFM) assumptions. The thermo-mechanical behavior of bituminous mixtures has been studied by performing i)complex modulus tests, ii)measurements of the coefficient of thermal dilatation and contraction, iii)tensile tests at constant temperatures and strain rates, and iv)Thermal Stress Restrained Specimen Tests. Apart from the determination of some pertinent links between binder and mix properties and discriminating characteristics with regard to the thermal cracking of bituminous mixes at low temperatures, the analysis has also consisted in modeling the behavior of

  9. Professional comportment: the missing element in nursing practice.

    Science.gov (United States)

    Clickner, Deborah A; Shirey, Maria R

    2013-01-01

    The aim of this concept analysis of professional comportment is to elucidate the dimension of nursing practice that fosters cooperation, collaboration, effective communication, and team cohesion among nurses. Professional comportment is a concept that has not been developed or analyzed, and its integration into nursing practice is unclear and not specified. The body of knowledge concentrating on the spectrum of professional comportment, civility, and lateral violence is presently incomplete. Analyzing and developing the concept of professional comportment will satisfy a gap in the literature. A concept analysis of professional comportment will clarify for the nurse the power of words, behaviors, and communication needed to achieve effective communication and civility. The Walker and Avant framework for concept analysis was used to analyze the concept of professional comportment. An electronic review of the literature through the Cumulative Index to Nursing and Allied Health Literature, Health Sources, Medical Complete, and ProQuest was conducted. This review rendered approximately 300 articles, of which 85 were reviewed. Eighteen articles informed comportment as a definition and are utilized in this analysis. The individual nurse is the level of focus in the analysis, not the organizational culture. Comportment is defined as a dignified manner or conduct. Professional comportment is critical in determining a nurse's effectiveness in relating, communicating, and collaborating with colleagues and members of the healthcare team. In the absence of professional comportment, a culture of incivility, nurse aggression, and compromised patient safety will emerge. Self-regulation and individual accountability are sequelae to professional comportment. The personal assimilation of professional comportment promotes mutual respect, harmony, commitment, and collaboration. The nurse, patient, and healthcare team are the beneficiaries of a nurse who demonstrates professional

  10. Synthesis of tetravalent actinide chlorides. Versatile compounds for actinide chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Maerz, Juliane [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Div. Chemistry of the F-Elements

    2016-07-01

    Anhydrous actinide tetrachlorides (AnCl{sub 4}) were synthesized under mild conditions to provide versatile compounds for actinide chemistry. They enable a direct access to actinide complexes with organic and inorganic ligands.

  11. Towards an interpretation of the mechanism of the actinides(III)/lanthanides(III) separation by synergistic solvent extraction with nitrogen-containing polydendate ligands; Vers une interpretation des mecanismes de la separation actinides(III)/lanthanides(III) par extraction liquide-liquide synergique impliquant des ligands polyazotes

    Energy Technology Data Exchange (ETDEWEB)

    Francois, N [CEA/VALRHO - site de Marcoule, Dept. de Recherche en Retraitement et en Vitrification, (DRRV), 30 - Marcoule (France); Universite Henri Poincare, 54 - Vandoeuvre-les-Nancy (France)

    2000-07-01

    In the field of the separation of long-lived radionuclides from the wastes produced by nuclear fuel reprocessing, aromatic nitrogen-containing polydendate ligands are potential candidates for the selective extraction, alone or in synergistic mixture with acidic extractants, of trivalent actinides from trivalent lanthanides. The first part of this work deals with the complexation of trivalent f cations with various nitrogen-containing ligands (poly-pyridine analogues). Time-resolved laser-induced fluorimetry (TRLIF) and UV-visible spectrophotometry were used to determine the nature and evaluate the stability of each complex. Among the ligands studied, the least basic Me-Btp proved to be highly selective towards americium(III) in acidic solution. In the second part, two synergistic systems (nitrogen-containing polydendate ligand and lipophilic carboxylic acid) are studied and compared in regard to the extraction and separation of lanthanides(III) and actinides(III). TRLIF and gamma spectrometry allowed the nature of the extracted complexes and the optimal conditions of efficiency of both systems to be determined. Comparison between these different studies showed that the selectivity of complexation of trivalent f cations by a given nitrogen-containing polydendate ligand could not always be linked to the Am(III)Eu(III) selectivity reached in synergistic extraction. The latter depends on the 'balance' between the acid-basic properties on the one hand, and on the hard-soft characteristics on the other hand, of both components of synergistic system. (author)

  12. Study of the selectivity of poly-nitrogenous extracting molecules in the complexation of actinides (III) and lanthanides (III) in solution in anhydrous pyridine; Etude de la selectivite de molecules extractantes polyazotees dans la complexation des actinides (III) et des lanthanides (III) en solution dans la pyridine anhydre

    Energy Technology Data Exchange (ETDEWEB)

    Riviere, Ch

    2000-10-05

    The aim of this work is to better understand the factors which contribute to the separation of lanthanides(III) and actinides(III). Polydentate nitrogenous molecules present an interesting selectivity. A thermodynamic study of the complexation in pyridine of lanthanide and uranium by the bipyridine ligand (bipy) has been carried out. The formation constants and the thermodynamic values of the different complexes have been determined. It has been shown that the bipy complexes formation is controlled by the enthalpy and unfavored by the entropy. The conductometry has revealed too a significant difference in the uranium and lanthanides complexation by the bipyridine ligand. The use of the phenanthroline ligand induces a better complexation of the metallic ions but the selectivity is not improved. On the other hand, the decrease of the basicity and the increase of the ligand denticity (for instance in the case of the use of ter-pyridine) favour the selectivity without improving the complexation. The selectivity difference for the complexation of actinides(III) and lanthanides(III) by the different studied ligands (independent systems) has been confirmed by experiments of inter-metals competition. (O.M.)

  13. Towards an interpretation of the mechanism of the actinides(III)/lanthanides(III) separation by synergistic solvent extraction with nitrogen-containing polydendate ligands; Vers une interpretation des mecanismes de la separation actinides(III)/lanthanides(III) par extraction liquide-liquide synergique impliquant des ligands polyazotes

    Energy Technology Data Exchange (ETDEWEB)

    Francois, N. [CEA/VALRHO - site de Marcoule, Dept. de Recherche en Retraitement et en Vitrification, (DRRV), 30 - Marcoule (France); Universite Henri Poincare, 54 - Vandoeuvre-les-Nancy (France)

    2000-07-01

    In the field of the separation of long-lived radionuclides from the wastes produced by nuclear fuel reprocessing, aromatic nitrogen-containing polydendate ligands are potential candidates for the selective extraction, alone or in synergistic mixture with acidic extractants, of trivalent actinides from trivalent lanthanides. The first part of this work deals with the complexation of trivalent f cations with various nitrogen-containing ligands (poly-pyridine analogues). Time-resolved laser-induced fluorimetry (TRLIF) and UV-visible spectrophotometry were used to determine the nature and evaluate the stability of each complex. Among the ligands studied, the least basic Me-Btp proved to be highly selective towards americium(III) in acidic solution. In the second part, two synergistic systems (nitrogen-containing polydendate ligand and lipophilic carboxylic acid) are studied and compared in regard to the extraction and separation of lanthanides(III) and actinides(III). TRLIF and gamma spectrometry allowed the nature of the extracted complexes and the optimal conditions of efficiency of both systems to be determined. Comparison between these different studies showed that the selectivity of complexation of trivalent f cations by a given nitrogen-containing polydendate ligand could not always be linked to the Am(III)Eu(III) selectivity reached in synergistic extraction. The latter depends on the 'balance' between the acid-basic properties on the one hand, and on the hard-soft characteristics on the other hand, of both components of synergistic system. (author)

  14. Study and development of a method allowing the identification of actinides inside nuclear waste packages, by active neutron or photon interrogation and delayed gamma-ray spectrometry; Etude et developpement d'une technique de dosage des actinides dans les colis de dechets radioactifs par interrogation photonique ou neutronique active et spectrometrie des gamma retardes

    Energy Technology Data Exchange (ETDEWEB)

    Carrel, F

    2007-10-15

    An accurate estimation of the alpha-activity of a nuclear waste package is necessary to select the best mode of storage. The main purpose of this work is to develop a non-destructive active method, based on the fission process and allowing the identification of actinides ({sup 235}U, {sup 238}U, {sup 239}Pu). These three elements are the main alpha emitters contained inside a package. Our technique is based on the detection of delayed gammas emitted by fission products. These latter are created by irradiation with the help of a neutron or photon beam. Performances of this method have been investigated after an Active Photon or Neutron Interrogation (INA or IPA). Three main objectives were fixed in the framework of this thesis. First, we measured many yields of photofission products to compensate the lack of data in the literature. Then, we studied experimental performances of this method to identify a given actinide ({sup 239}Pu in fission, {sup 235}U in photofission) present in an irradiated mixture. Finally, we assessed the application of this technique on different mock-up packages for both types of interrogation (118 l mock-up package containing EVA in fission, 220 l mock-up package with a wall of concrete in photofission). (author)

  15. Psychological Aspects of Deployment and Health Behaviours (Aspects psychologiques de la projection operationnelle et comportements lies a la sante)

    Science.gov (United States)

    2012-05-01

    certains Panels, vous pouvez demander d’être inclus soit à titre personnel, soit au nom de votre organisation, sur la liste d’envoi. Les publications...comporter la dénomination « RTO » ou « AGARD » selon le cas, suivi du numéro de série. Des informations analogues, telles que le titre est la date de...dénomination « RTO » ou « AGARD » selon le cas, suivie du numéro de série (par exemple AGARD-AG-315). Des informations analogues, telles que le titre et la date

  16. Thermodynamic Properties of Actinides and Actinide Compounds

    Science.gov (United States)

    Konings, Rudy J. M.; Morss, Lester R.; Fuger, Jean

    The necessity of obtaining accurate thermodynamic quantities for the actinide elements and their compounds was recognized at the outset of the Manhattan Project, when a dedicated team of scientists and engineers initiated the program to exploit nuclear energy for military purposes. Since the end of World War II, both fundamental and applied objectives have motivated a great deal of further study of actinide thermodynamics. This chapter brings together many research papers and critical reviews on this subject. It also seeks to assess, to systematize, and to predict important properties of the actinide elements, ions, and compounds, especially for species in which there is significant interest and for which there is an experimental basis for the prediction.

  17. Research in actinide chemistry

    International Nuclear Information System (INIS)

    Choppin, G.R.

    1993-01-01

    This research studies the behavior of the actinide elements in aqueous solution. The high radioactivity of the transuranium actinides limits the concentrations which can be studied and, consequently, limits the experimental techniques. However, oxidation state analogs (trivalent lanthanides, tetravalent thorium, and hexavalent uranium) do not suffer from these limitations. Behavior of actinides in the environment are a major USDOE concern, whether in connection with long-term releases from a repository, releases from stored defense wastes or accidental releases in reprocessing, etc. Principal goal of our research was expand the thermodynamic data base on complexation of actinides by natural ligands (e.g., OH - , CO 3 2- , PO 4 3- , humates). The research undertakes fundamental studies of actinide complexes which can increase understanding of the environmental behavior of these elements

  18. Effet des additions sur la microstructure et le comportement ...

    African Journals Online (AJOL)

    the microstructure, thermal fatigue and tribological tests of the NiAl coating, obtained by atmospheric plasma ...... Mechanisms of oxidation and its role in microstructural evolution of ... protective coatings, Surface and Coatings Technology, Vol.

  19. Effet des additions sur la microstructure et le comportement ...

    African Journals Online (AJOL)

    The friction coefficient was determined under a normal load of 5 N with sliding speed of 11.31 cm/s and at room temperature. The NiAl coating present the lowest coefficient of friction. The incorporation of the particles improves the coefficient of friction. Keywords: Thermal fatigue-erosion-plasma Spray-NiAl coating-friction ...

  20. Etude expérimentale sur le comportement d’un nouveau type d’accumulateur d’énergie thermique. Déterminations préliminaires sur l’installation expérimentale

    Directory of Open Access Journals (Sweden)

    Valentin Pavel

    2004-01-01

    Full Text Available On présente la première partie d’une étude concernant le comportement d’un nouveau type d’accumulateur d’énergie thermique. Sont présentées les déterminations se référant au comportement de l’unité centrale de stockage dans la phase de relaxation (refroidissement libre afin d’établir les pertes de chaleur, pour avoir une approche correcte des phénomènes dans les étapes ultérieures des études concernant l’accumulateur.

  1. Observations sur le comportement alimentaire de la population de truites communes (Salmo trutta L. dans la rivière Estoräos, Portugal

    Directory of Open Access Journals (Sweden)

    VALENTE A.

    1990-07-01

    Full Text Available L'étude du comportement alimentaire d'une population de truites, Salmo trutta L., est abor-dée dans la rivière Estoräos, au nord du Portugal. L'étude des macroinvertébrés benthiques et en dérive montre une composition comparable à celle d'autres rivières européennes. La fréquence d'occurrence des organismes proies ingérés met en évidence la diversité du choix alimentaire, plus marquée chez les poissons 1+. Le comportement alimentaire opportuniste de l'espèce est confirmé. L'analyse en composantes principales révèle des similitudes entre le spectre trophique des deux groupes d'âge étudiés. Le comportement alimentaire ne semble pas responsable des faibles croissance et densité de cette population détruites.

  2. Behaviour at the indicator scale of the elements Zr, Hf and 104, Nb,Ta and Pa (105) in very complexation media; Comportement a l`echelle des indicateurs des elements Zr, Hf, et 104, Nb, Ta, et Pa (105) en milieux tres complexants

    Energy Technology Data Exchange (ETDEWEB)

    Monroy Guzman, F. [Institut de Physique Nucleaire, CNRS - IN2P3 Universite Paris Sud, 91406 Orsay Cedex (France)

    1997-12-31

    In order to determine the chemical properties of the trans-actinide elements of Z = 104 and 105 in aqueous solutions we studied their behaviour to ion exchange resin in different complex media. Due to the very short lifetimes (some tens of seconds) et to the low yield of these elements (a few atoms per irradiation hour) only very fast radiochemical techniques can be used. These severe constraints impose comparative studies of these elements with their most likely homologues to be carried out. The corresponding homologues were the elements of group 4 (Zr and Hf) for the element 104 and the elements of group 5 (Nb and Ta) and also Pa for the element 105. The complexation properties of the elements at indicator scale were determined in the media of HF, NH{sub 4}/HClO{sub 4}, NH{sub 4}SCN/HClO{sub 4}, NH{sub 4}SCN/HF and HCl/HF by ion exchange chromatography. The studies in fluorides media allowed us to identify the complexes in solution and to explain the shape of the experimentally observed sorption curves. The decrease of sorption for higher acid concentration in case of HF/HCl medium was interpreted by formation of chloro-fluoro-complexes. In case of the mixture NH{sub 4}SCN/HF, the particularly pronounced anti-synergic effects were observed and discussed. At the same time studies of the Hf and Ta short-lived isotopes were carried out by means of the RACHEL facility operating by the Orsay Tandem accelerator. These realistic simulations allowed optimization of different production, transportation and separation stages of the trans-actinide elements. The two experiments of 104 element production showed that this element forms in HF very stable anionic complexes similarly to its homologues Zr and Hf. (authors). 181 refs.

  3. Behaviour at the indicator scale of the elements Zr, Hf and 104, Nb,Ta and Pa (105) in very complexation media; Comportement a l`echelle des indicateurs des elements Zr, Hf, et 104, Nb, Ta, et Pa (105) en milieux tres complexants

    Energy Technology Data Exchange (ETDEWEB)

    Monroy Guzman, F [Institut de Physique Nucleaire, CNRS - IN2P3 Universite Paris Sud, 91406 Orsay Cedex (France)

    1998-12-31

    In order to determine the chemical properties of the trans-actinide elements of Z = 104 and 105 in aqueous solutions we studied their behaviour to ion exchange resin in different complex media. Due to the very short lifetimes (some tens of seconds) et to the low yield of these elements (a few atoms per irradiation hour) only very fast radiochemical techniques can be used. These severe constraints impose comparative studies of these elements with their most likely homologues to be carried out. The corresponding homologues were the elements of group 4 (Zr and Hf) for the element 104 and the elements of group 5 (Nb and Ta) and also Pa for the element 105. The complexation properties of the elements at indicator scale were determined in the media of HF, NH{sub 4}/HClO{sub 4}, NH{sub 4}SCN/HClO{sub 4}, NH{sub 4}SCN/HF and HCl/HF by ion exchange chromatography. The studies in fluorides media allowed us to identify the complexes in solution and to explain the shape of the experimentally observed sorption curves. The decrease of sorption for higher acid concentration in case of HF/HCl medium was interpreted by formation of chloro-fluoro-complexes. In case of the mixture NH{sub 4}SCN/HF, the particularly pronounced anti-synergic effects were observed and discussed. At the same time studies of the Hf and Ta short-lived isotopes were carried out by means of the RACHEL facility operating by the Orsay Tandem accelerator. These realistic simulations allowed optimization of different production, transportation and separation stages of the trans-actinide elements. The two experiments of 104 element production showed that this element forms in HF very stable anionic complexes similarly to its homologues Zr and Hf. (authors). 181 refs.

  4. ETUDE DE LA DISTRIBUTION DES CATIONS ECHANGEABLES

    African Journals Online (AJOL)

    SEI Joseph

    été mené dans une serre en verre au département de Biologie (Université de ... taux de Na+ et K+, et fait l'analyse des paramètres physique et chimique du sol .... comportement de cette espèce : Atriplex. halimus vis-à-vis de cinq doses de ...

  5. evaluation et selection participative des varietes ameliorees

    African Journals Online (AJOL)

    ACSS

    Le manque de semences de variétés performantes constitue au Bénin l'une des contraintes au développement de la production de ... Quatre variétés, comportant trois variétés améliorées du Burkina-Faso et ... Il est suivi du Niger avec 650.

  6. Study of extraction kinetics of lanthanides(III) and actinides(III) nitrates by the molecule N, N'-dimethyl-N, N'-dibutyl, tetradecylmalonamide; Etude des cinetiques d'extraction des nitrates de lanthanides (III) et d'actinides (III) par le malonamide N, N'-dimethyl-N, N'-dibutyl, tetradecylmalonamide

    Energy Technology Data Exchange (ETDEWEB)

    Daldon, M

    1999-07-01

    The kinetics of extraction of lanthanides (III) and actinides (III) nitrates by the molecule N, N'-dimethyl - N, N'-dibutyl tetra-decyl malonamide has been investigated. This study was realised with a new constant interfacial-area-stirred cell. During the qualification step of the device it appears that the reduction of the device can lead to hydrolytic perturbations. The main conclusions are: - after the determination of conditions which provide kinetics regime (diffusion of species neglectable), partial orders of the kinetics law have been obtained and lead to the establishment of the law J = k [Nd{sup 3+}] [NO{sub 3}{sup -}]{sup 3} [diamide]{sup 1}, - interfacial tension measurements and kinetics study in presence of surface-active compounds proved that the chemical limiting reaction for Nd(III) is interfacial, - the results allow to propose an adsorption-desorption reaction mechanism, - a comprehensive study of the extraction kinetics of the lanthanides(III) series and also Am(III) and Cm(III) nitrates has been realised. The lighter lanthanides (La, Ce and Pr) exhibit higher kinetics rate of extraction than the others, which differs from the tendency observed with distribution coefficients which exhibit tetrad effect. The kinetics rate of extraction of Am(III) and Cm(III) is closed to the value of Eu(III). (author)

  7. PRODUCTION OF ACTINIDE METAL

    Science.gov (United States)

    Knighton, J.B.

    1963-11-01

    A process of reducing actinide oxide to the metal with magnesium-zinc alloy in a flux of 5 mole% of magnesium fluoride and 95 mole% of magnesium chloride plus lithium, sodium, potassium, calcium, strontium, or barium chloride is presented. The flux contains at least 14 mole% of magnesium cation at 600-- 900 deg C in air. The formed magnesium-zinc-actinide alloy is separated from the magnesium-oxide-containing flux. (AEC)

  8. Superconductivity in the actinides

    International Nuclear Information System (INIS)

    Smith, J.L.; Lawson, A.C.

    1985-01-01

    The trends in the occurrence of superconductivity in actinide materials are discussed. Most of them seem to show simple transition metal behavior. However, the superconductivity of americium proves that the f electrons are localized in that element and that ''actinides'' is the correct name for this row of elements. Recently the superconductivity of UBe 13 and UPt 3 has been shown to be extremely unusual, and these compounds fall in the new class of compounds now known as heavy fermion materials

  9. Irradiations effects on the structure of boro-silicated glasses: long term behaviour of nuclear waste glassy matrices; Effets d'irradiations sur la structure de verres borosilicates - comportement a long terme des matrices vitreuses de stockage des dechets nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Bonfils, J. de

    2007-09-15

    This work deals with the long term behaviour of R7T7-type nuclear waste glasses and more particularly of non-active boro-silicated glasses made up of 3 or 5 oxides. Radioactivity of active glasses is simulated by multi energies ions implantations which reproduce the same defects. The damages due to the alpha particles are simulated by helium ions implantations and those corresponding to the recoil nucleus are obtained with gold ions ones. Minor actinides, stemming from the used fuel, is simulated by trivalent rare-earths (Eu{sup 3+} and Nd{sup 3+}). In a first part, we have shown by macroscopic experiments (Vickers hardness - swelling) and optical spectroscopies (Raman - ATR-IR) that the structure of the glassy matrices is modified under implantations until a dose of 2,3.10{sup 13} at.cm{sup -2}, which corresponds to a R7T7 storage time estimated at 300 years. Beyond this dose, no additional modifications have been observed. The second part concerns the local environment of the rare-earth ions in glasses. Two different environments were found and identified as follows: one is a silicate rich one and the other is attributed to a borate rich one. (author)

  10. Minor actinide transmutation using minor actinide burner reactors

    International Nuclear Information System (INIS)

    Mukaiyama, T.; Yoshida, H.; Gunji, Y.

    1991-01-01

    The concept of minor actinide burner reactor is proposed as an efficient way to transmute long-lived minor actinides in order to ease the burden of high-level radioactive waste disposal problem. Conceptual design study of minor actinide burner reactors was performed to obtain a reactor model with very hard neutron spectrum and very high neutron flux in which minor actinides can be fissioned efficiently. Two models of burner reactors were obtained, one with metal fuel core and the other with particle fuel core. Minor actinide transmutation by the actinide burner reactors is compared with that by power reactors from both the reactor physics and fuel cycle facilities view point. (author)

  11. Subsurface Biogeochemistry of Actinides

    Energy Technology Data Exchange (ETDEWEB)

    Kersting, Annie B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). Univ. Relations and Science Education; Zavarin, Mavrik [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). Glenn T. Seaborg Inst.

    2016-06-29

    A major scientific challenge in environmental sciences is to identify the dominant processes controlling actinide transport in the environment. It is estimated that currently, over 2200 metric tons of plutonium (Pu) have been deposited in the subsurface worldwide, a number that increases yearly with additional spent nuclear fuel (Ewing et al., 2010). Plutonium has been shown to migrate on the scale of kilometers, giving way to a critical concern that the fundamental biogeochemical processes that control its behavior in the subsurface are not well understood (Kersting et al., 1999; Novikov et al., 2006; Santschi et al., 2002). Neptunium (Np) is less prevalent in the environment; however, it is predicted to be a significant long-term dose contributor in high-level nuclear waste. Our focus on Np chemistry in this Science Plan is intended to help formulate a better understanding of Pu redox transformations in the environment and clarify the differences between the two long-lived actinides. The research approach of our Science Plan combines (1) Fundamental Mechanistic Studies that identify and quantify biogeochemical processes that control actinide behavior in solution and on solids, (2) Field Integration Studies that investigate the transport characteristics of Pu and test our conceptual understanding of actinide transport, and (3) Actinide Research Capabilities that allow us to achieve the objectives of this Scientific Focus Area (SFA and provide new opportunities for advancing actinide environmental chemistry. These three Research Thrusts form the basis of our SFA Science Program (Figure 1).

  12. Gestion intégrée de l'eau et des nutriments pour la production ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le microdosage comporte l'ajout de petites quantités d'engrais au moment des semences ou peu de temps après la germination des graines. Bien que cette technologie puisse accroître les rendements dans une proportion pouvant atteindre 120 %, seulement 5 % des producteurs sahéliens l'utilisent. Ce faible taux ...

  13. Actinide colloid generation in groundwater

    International Nuclear Information System (INIS)

    Kim, J.I.

    1990-05-01

    The progress made in the investigation of actinide colloid generation in groundwaters is summarized and discussed with particular examples relevant to an understanding of the migration behaviour of actinides in natural aquifer systems. The first part deals with the characterization of colloids: groundwater colloids, actinide real-colloids and actinide pseudocolloids. The second part concentrates on the generation processes and migration behaviour of actinide pseudocolloids, which are discussed with some notable experimental examples. Importance is stressed more on the chemical aspects of the actinide colloid generation in groundwater. This work is a contribution to the CEC project MIRAGE II, particularly, to research area: complexation and colloids. (orig.)

  14. Application of voxelised numerical phantoms linked to the M.C.N.P. Monte Carlo code to the realistic measurement in vivo of actinides in the lungs and contaminated wounds; Application des fantomes numeriques voxelises associes au code Monte Carlo MCNP a la mesure in vivo realiste des actinides dans les poumons et les plaies contaminees

    Energy Technology Data Exchange (ETDEWEB)

    Noelle, P

    2006-12-15

    In vivo lung counting, one of the preferred methods for monitoring people exposed to the risk of actinide inhalation, is nevertheless limited by the use of physical calibration phantoms which, for technical reasons, can only provide a rough representation of human tissue. A new approach to in vivo measurements has been developed to take advantage of advances in medical imaging and computing; this consists of numerical phantoms based on tomographic images (CT) or magnetic resonance images (R.M.I.) combined with Monte Carlo computing techniques. Under laboratory implementation of this innovative method using specific software called O.E.D.I.P.E., the main thrust of this thesis was to provide answers to the following question: what do numerical phantoms and new techniques like O.E.D.I.P.E. contribute to the improvement in calibration of low-energy in vivo counting systems? After a few developments of the O.E.D.I.P.E. interface, the numerical method was validated for systems composed of four germanium detectors, the most widespread configuration in radio bioassay laboratories (a good match was found, with less than 10% variation). This study represents the first step towards a person-specific numerical calibration of counting systems, which will improve assessment of the activity retained. A second stage focusing on an exhaustive evaluation of uncertainties encountered in in vivo lung counting was possible thanks to the approach offered by the previously-validated O.E.D.I.P.E. software. It was shown that the uncertainties suggested by experiments in a previous study were underestimated, notably morphological differences between the physical phantom and the measured person. Some improvements in the measurement procedure were then proposed, particularly new bio-metric equations specific to French measurement configurations that allow a more sensible choice of the calibration phantom, directly assessing the thickness of the torso plate to be added to the Livermore phantom

  15. Le besoin de réassurance : de la psychologie au comportement du consommateur Une investigation théorique appliquée au cas de la consommation alimentaire moderne

    Directory of Open Access Journals (Sweden)

    Wejdene Yanhui

    2015-03-01

    Ce travail, dont l’intérêt est essentiellement théorique, s’inscrit parmi les travaux rares introduisant le besoin de réassurance dans l’étude du comportement du consommateur. Des travaux futurs peuvent se baser sur cette conceptualisation pour identifier les déterminants de ce besoin.

  16. Actinide isotopic analysis systems

    International Nuclear Information System (INIS)

    Koenig, Z.M.; Ruhter, W.D.; Gunnink, R.

    1990-01-01

    This manual provides instructions and procedures for using the Lawrence Livermore National Laboratory's two-detector actinide isotope analysis system to measure plutonium samples with other possible actinides (including uranium, americium, and neptunium) by gamma-ray spectrometry. The computer program that controls the system and analyzes the gamma-ray spectral data is driven by a menu of one-, two-, or three-letter options chosen by the operator. Provided in this manual are descriptions of these options and their functions, plus detailed instructions (operator dialog) for choosing among the options. Also provided are general instructions for calibrating the actinide isotropic analysis system and for monitoring its performance. The inventory measurement of a sample's total plutonium and other actinides content is determined by two nondestructive measurements. One is a calorimetry measurement of the sample's heat or power output, and the other is a gamma-ray spectrometry measurement of its relative isotopic abundances. The isotopic measurements needed to interpret the observed calorimetric power measurement are the relative abundances of various plutonium and uranium isotopes and americium-241. The actinide analysis system carries out these measurements. 8 figs

  17. ETUDE COMPARATIVE DU COMPORTEMENT A L’USURE DE CERTAINES NUANCES DE CERAMIQUE DE COUPE EN TOURNAGE

    Directory of Open Access Journals (Sweden)

    M A YALLESE

    2002-06-01

    Full Text Available Des essais de coupe ont été effectués par quatre outils en céramique, face à l’acier  AF37. Les résultats de ces essais nous ont permis d’étudier l’influence  des paramètres de coupe sur le comportement à l’usure des différentes céramiques étudiées. Pour ces différentes céramiques la relation entre la tenue et les paramètres de coupe a été exprimée suivant le modèle mathématique de Taylor.

  18. Extraction chromatography of actinides

    International Nuclear Information System (INIS)

    Muller, W.

    1978-01-01

    Extraction chromatography of actinides in the oxidation state from 2 to 6 is reviewed. Data on using neutral (tbp), basic (substituted ammonium salts) and acidic [di-(2-ethylhexyl)-phosphoric acid (D2EHPA)] extracting agents ketones, esters, alcohols and β-diketones in this method are given. Using the example of actinide separation using D2EHPA, discussed are factors influencing the efficiency of their chromatography separation (nature and particle size of the carrier materials, extracting agents amount on the carrier, temperature and elution rate)

  19. Actinide nanoparticle research

    International Nuclear Information System (INIS)

    Kalmykov, Stepan N.; Denecke, Melissa A.

    2011-01-01

    This is the first book to cover actinide nano research. It is of interest both for fundamental research into the chemistry and physics of f-block elements as well as for applied researchers such as those studying the long-term safety of nuclear waste disposal and developing remediation strategies. The authors cover important issues of the formation of actinide nano-particles, their properties and structure, environmental behavior of colloids and nanoparticles related to the safe disposal of nuclear wastes, modeling and advanced methods of characterization at the nano-scale. (orig.)

  20. Radiochemistry and actinide chemistry

    International Nuclear Information System (INIS)

    Guillaumont, R.; Peneloux, A.

    1989-01-01

    The analysis of trace amounts of actinide elements by means of radiochemistry, is discussed. The similarities between radiochemistry and actinide chemistry, in the case of species amount by cubic cm below 10 12 , are explained. The parameters which allow to define what are the observable chemical reactions, are given. The classification of radionuclides in micro or macrocomponents is considered. The validity of the mass action law and the partition function in the definition of the average number of species for trace amounts, is investigated. Examples illustrating the results are given

  1. Actinides, the narrowwest bands

    International Nuclear Information System (INIS)

    Smith, J.L.; Riseborough, P.S.

    1984-01-01

    A table of elements is shown that demonstrates the crossover from superconductivity to magnetism as well as regions of mixed valence. In particular, the actinides must eventually show 4f-electron like mixed valence, after the 5f-electrons become localized. There also seems to be an adiabatic continuation between heavy fermion and mixed valence behavior

  2. Actinide separative chemistry

    International Nuclear Information System (INIS)

    Boullis, B.

    2004-01-01

    Actinide separative chemistry has focused very heavy work during the last decades. The main was nuclear spent fuel reprocessing: solvent extraction processes appeared quickly a suitable, an efficient way to recover major actinides (uranium and plutonium), and an extensive research, concerning both process chemistry and chemical engineering technologies, allowed the industrial development in this field. We can observe for about half a century a succession of Purex plants which, if based on the same initial discovery (i.e. the outstanding properties of a molecule, the famous TBP), present huge improvements at each step, for a large part due to an increased mastery of the mechanisms involved. And actinide separation should still focus R and D in the near future: there is a real, an important need for this, even if reprocessing may appear as a mature industry. We can present three main reasons for this. First, actinide recycling appear as a key-issue for future nuclear fuel cycles, both for waste management optimization and for conservation of natural resource; and the need concerns not only major actinide but also so-called minor ones, thus enlarging the scope of the investigation. Second, extraction processes are not well mastered at microscopic scale: there is a real, great lack in fundamental knowledge, useful or even necessary for process optimization (for instance, how to design the best extracting molecule, taken into account the several notifications and constraints, from selectivity to radiolytic resistivity?); and such a need for a real optimization is to be more accurate with the search of always cheaper, cleaner processes. And then, there is room too for exploratory research, on new concepts-perhaps for processing quite new fuels- which could appear attractive and justify further developments to be properly assessed: pyro-processes first, but also others, like chemistry in 'extreme' or 'unusual' conditions (supercritical solvents, sono-chemistry, could be

  3. Actinide oxide photodiode and nuclear battery

    Energy Technology Data Exchange (ETDEWEB)

    Sykora, Milan; Usov, Igor

    2017-12-05

    Photodiodes and nuclear batteries may utilize actinide oxides, such a uranium oxide. An actinide oxide photodiode may include a first actinide oxide layer and a second actinide oxide layer deposited on the first actinide oxide layer. The first actinide oxide layer may be n-doped or p-doped. The second actinide oxide layer may be p-doped when the first actinide oxide layer is n-doped, and the second actinide oxide layer may be n-doped when the first actinide oxide layer is p-doped. The first actinide oxide layer and the second actinide oxide layer may form a p/n junction therebetween. Photodiodes including actinide oxides are better light absorbers, can be used in thinner films, and are more thermally stable than silicon, germanium, and gallium arsenide.

  4. Synthesis and characterization of low-valence actinide phosphide tellurides and ternary selenium-halide iridium complexes; Synthese und Charakterisierung niedervalenter Actinoidphosphidtelluride und ternaerer Selen-Halogenid-Komplexe des Iridiums

    Energy Technology Data Exchange (ETDEWEB)

    Stolze, Karoline

    2016-04-07

    The thesis on the synthesis and characterization of low-valence actinide phosphide tellurides and ternary selenium-halide iridium complexes includes two parts: a description of the experimental synthesis of UPTe and U2PTe2O and ThPTe and the synthesis of selenium-chloride iridium complexes and selenium-bromide iridium complexes. The characterization included X-ray diffraction and phase studies.

  5. modelisation du comportement hydrologique du bassin versant

    African Journals Online (AJOL)

    LGE

    gestion optimale de l‟eau sur un bassin versant. ..... paramètres sont vérifiés sur la (s) période (s) de contrôle afin de s‟assurer ... critère est très utilisé en hydrologie pour évaluer les performances des modèles pluie-débit. ..... Dans un second temps, il peut d‟agir de la procédure de mesure des débits qui est basée sur la.

  6. Actinide recycling in reactors

    International Nuclear Information System (INIS)

    Kuesters, H.; Wiese, H.W.; Krieg, B.

    1995-01-01

    The objective is an assessment of the transmutation of long-lived actinides and fission products and the incineration of plutonium for reducing the risk potential of radioactive waste from reactors in comparison to direct waste disposal. The contribution gives an interim account on homogeneous and heterogeneous recycling of 'risk nuclides' in thermal and fast reactors. Important results: - A homogeneous 5 percent admixture of minor actinides (MA) from N4-PWRs to EFR fuel would allow a transmutation not only of the EFR MA, but in addition of the MA from 5 or 6 PWRs of equal power. However, the incineration is restricted by safety considerations. - LWR have only a very low MA incineration potential, due to their disadvantageous neutron capture/fission ratio. - In order to keep the Cm inventory at a low level, it is advantageous to concentrate the Am heterogeneously in particular fuel elements or rods. (orig./HP)

  7. Photochemistry of the actinides

    International Nuclear Information System (INIS)

    Toth, L.M.; Bell, J.T.; Friedman, H.A.

    1979-01-01

    It has been found that all three major actinides have a useful variety of photochemical reactions which could be used to achieve a separations process that requires fewer reagents. Several features merit enumerating: (1) Laser photochemistry is not now as uniquely important in fuel reprocessing as it is in isotopic enrichment. The photochemistry can be successfully accomplished with conventional light sources. (2) The easiest place to apply photo-reprocessing is on the three actinides U, Pu, and Np. The solutions are potentially cleaner and more amenable to photoreactions. (3) Organic-phase photoreactions are probably not worth much attention because of the troublesome solvent redox chemistry associated with the photochemical reaction. (4) Upstream process treatment on the raffinate (dissolver solution) may never be too attractive since the radiation intensity precludes the usage of many optical materials and the nature of the solution is such that light transmission into it might be totally impossible

  8. Analytical chemistry of actinides

    International Nuclear Information System (INIS)

    Chollet, H.; Marty, P.

    2001-01-01

    Different characterization methods specifically applied to the actinides are presented in this review such as ICP/OES (inductively coupled plasma-optical emission spectrometry), ICP/MS (inductively coupled plasma spectroscopy-mass spectrometry), TIMS (thermal ionization-mass spectrometry) and GD/OES (flow discharge optical emission). Molecular absorption spectrometry and capillary electrophoresis are also available to complete the excellent range of analytical tools at our disposal. (authors)

  9. Actinides: why are they important biologically

    International Nuclear Information System (INIS)

    Durbin, P.W.

    1978-01-01

    The following topics are discussed: actinide elements in energy systems; biological hazards of the actinides; radiation protection standards; and purposes of actinide biological research with regard to toxicity, metabolism, and therapeutic regimens

  10. A contribution to the study of the extraction of mineral acids and of actinide (IV) and (VI) cations by N,N-dialkylamides; Contribution a l'etude de l'extraction d'acides mineraux et de cations actinides aux degres d'oxydation (IV) et (VI) par des N,N-dialkylamides

    Energy Technology Data Exchange (ETDEWEB)

    Condamines, N

    1990-03-15

    N,N-dialkylamides are alternate extractants to tributylphosphate, TBP, for the actinides separation in nuclear fuel reprocessing. N,N-di (2-ethyl hexyl) butyramide and N,N-di (2 ethyl hexyl) isobutyramide are selected for their sufficient extraction and partition ability towards actinides (IV) and (VI) without coextracting fission products. Mechanisms of HNO{sub 3}, UO{sub 2}{sup 2+}, Pu{sup 4+}, Th{sup 4+} are investigated. Nitric acid extraction is due to the competitive formation of the species (HNO{sub 3})L{sub 2}, (HNO{sub 3})L, (HNO{sub 3}){sub 2}L (L: DOBA or DOiBA). An hydrogen bond is the driving force of the transfer. For low acidity media, amides are neutral extractants. Physical interactions, between free ligand and metallic complex, arise for high amide concentrations. Taking into account the non-ideality of the organic medium by a hard spheres mixture model, we estimate that such interactions are far from negligible and very specific to the amide group. Unlike TBP, when increasing acidity, amides behave as anionic extractants. DOBA and DOiBA appear to be satisfactory extractants for fuel reprocessing.

  11. The coupling of capillary electrophoresis-inductively coupled plasma mass spectrometer as a speciation instrument for actinides at trace level; Le couplage electrophorese capillaire-spectrometre de masse a source plasma en tant qu'instrument de speciation des actinides a l'etat de traces

    Energy Technology Data Exchange (ETDEWEB)

    Delorme, A

    2004-07-01

    An interface between the separation technique (capillary electrophoresis) and the analytical technique (Inductively Coupled Plasma - Mass Spectrometer) was developed. In that sense, bibliographic and parametric studies allowed to define necessary conditions for the good working of both techniques. The results obtained led to the realisation of an interface capillary electrophoresis / ICP-MS (CE / ICP-MS). This one was experimentally validated on classical separations (alkalis / earth-alkalis and lanthanides) and the detection limit of the analytical system was determined equal to 4 x 10{sup -11} mol.L{sup -1} for plutonium. This result exhibits a gain in detection limit of a factor higher than 10{sup 4} compared to the capillary electrophoresis in standard detection (UV). The studies were made in order to check the capacity of the CE / ICP-MS coupling as a speciation instrument for actinides at trace level and to define the associated analytical procedures. The coupling turned out to be a suited instrument for the determination of absolute electrophoretic mobilities at infinite dilution (physico-chemical property which allows to predict the migration time of an ion under an electrical field in a given electrolyte), for the determination of thermodynamic constants and for the separation of different actinide oxidation states in solution. (author)

  12. Measurement of cross-sections of fission reactions induced by neutrons on actinides from the thorium cycle at n-TOF facility; Mesures de sections efficaces de fission induite par neutrons sur des actinides du cycle du thorium a n-TOF

    Energy Technology Data Exchange (ETDEWEB)

    Ferrant, L

    2005-09-01

    In the frame of innovating energy source system studies, thorium fuel cycle reactors are considered. Neutron induced fission cross section on such cycle involved actinides play a role in scenario studies. To feed them, data bases are built with experimental results and nuclear models. For some nuclei, they are not complete or in disagreement. In order to complete these data bases, we have built an original set up, consisting in an alternation of PPACs (Parallel Plate Avalanche Chamber) and ultra - thin targets, which we installed on n-TOF facility. We describe detectors, set up, and the particular care brought to target making and characterization. Fission products in coincidence are detected with precise time measurement and localization with delay line read out method. We contributed, within the n-TOF collaboration, to the CERN brand new intense spallation neutron source characterization, based on time of flight measurement, and we describe its characteristics and performances. We were able to measure such actinide fission cross sections as {sup 232}Th, {sup 234}U, {sup 233}U, {sup 237}Np, {sup 209}Bi, and {sup nat}Pb relative to {sup 235}U et {sup 238}U standards, using an innovative acquisition system. We took advantage of the lame accessible energy field, from 0.7 eV to 1 GeV, combined with the excellent energy resolution in this field. Data treatment and analysis advancement are described to enlighten performance and limits of the obtained results. (author)

  13. Thermodynamic modelling of the extraction of nitrates of lanthanides by CMPO and by CMPO-like calixarene in concentrated nitric acid medium. Application in the optimization of the separation of lanthanides and actinides/lanthanides; Modelisation thermodynamique de l'extraction de nitrates de lanthanides par le CMPO et par un calixarene-CMPO en milieu acide nitrique concentre. Application a l'optimisation de la separation des lanthanides et des actinides/lanthanides

    Energy Technology Data Exchange (ETDEWEB)

    Belair, S

    2003-07-01

    The separation minor actinides / lanthanides in nitric acid medium is as one of problems of separative chemistry the most delicate within the framework of the processes allowing the recovery of long life radioelements present in the solutions of fission products. Previous studies showed that CMPO-substituted calix[4]arenes presents a better affinity for actinides than for lanthanides. To optimize the operating conditions of separation and to take into account the degree of non-ideality for the concentrated nitric solutions, we adopted a thermodynamic approach. The methodology taken to determine the number and the stoichiometry of the complexes formed in organic phase base on MIKULIN-SERGIEVSKII's model used through a software of data processing of experimental extraction isotherms. These tools are exploited at first on an extraction system engaging the CMPO, extractant reagent of actinides and lanthanides in concentrated nitric medium. The modelling of the system Ln(NO{sub 3}){sub 3}-HNO{sub 3}-H{sub 2}O/CMPO comes to confirm the results of several studies. At the same time, they allow to establish working hypotheses aiming at limiting the investigations of our researches towards the most stable complexes formed between lanthanides and CMPO-like calixarene to which the same method is then applied. An analytical expression of the selectivity of separation by the calixarene is established to determine the parameters and physico-chemical variables on which it depends. So, the ratio of the constants of extraction and the value of the activity of water of the system fixes the selectivity of separation of 2 elements. The exploitation of this relation allows to preview the influence of a variation of the concentration of nitric acid. Experiments of extraction confirm these forecasts and inform about the affinity of the calixarene with respect to lanthanides elements and to the americium. (author)

  14. Thermal neutron actinide data

    International Nuclear Information System (INIS)

    Tellier, H.

    1992-01-01

    During the 70's, the physicists involved in the cross section measurements for the low energy neutrons were almost exclusively interested in the resonance energy range. The thermal range was considered as sufficiently known. In the beginning of the 80's, reactor physicists had again to deal with the delicate problem of the power reactor temperature coefficient, essentially for the light water reactors. The measured value of the reactivity temperature coefficient does not agree with the computed one. The later is too negative. For obvious safety reasons, it is an important problem which must be solved. Several causes were suggested to explain this discrepancy. Among all these causes, the spectral shift in the thermal energy range seems to be very important. Sensibility calculations shown that this spectral shift is very sensitive to the shape of the neutron cross sections of the actinides for energies below one electron-volt. Consequently, reactor physicists require new and accurate measurements in the thermal and subthermal energy ranges. A part of these new measurement results were recently released and reviewed. The purpose of this study is to complete the preceding review with the new informations which are now available. In reactor physics the major actinides are the fertile nuclei, uranium 238, thorium 232 and plutonium 240 and the fissile nuclei, uranium 233, uranium 235 and plutonium 239. For the fertile nuclei the main datum is the capture cross section, for the fissile nuclei the data of interest are nu-bar, the fission and capture cross sections or a combination of these data such as η or α. In the following sections, we will review the neutron data of the major actinides for the energy below 1 eV

  15. Actinide Separation Demonstration Facility, Tarapur

    International Nuclear Information System (INIS)

    Vishwaraj, I.

    2017-01-01

    Partitioning of minor actinide from high level waste could have a substantial impact in lowering the radio toxicity associated with high level waste as well as it will reduce the burden on geological repository. In Indian context, the partitioned minor actinide could be routed into the fast breeder reactor systems scheduled for commissioning in the near period. The technological breakthrough in solvent development has catalyzed the partitioning programme in India, leading to the setting up and hot commissioning of the Actinide Separation Demonstration Facility (ASDF) at BARC, Tarapur. The engineering scale Actinide Separation Demonstration Facility (ASDF) has been retrofitted in an available radiological hot cell situated adjacent to the Advanced Vitrification Facility (AVS). This location advantage ensures an uninterrupted supply of high-level waste and facilitates the vitrification of the high-level waste after separation of minor actinides

  16. Application d'une équation d'état à la simulation du comportement thermodynamique des fluides dans les gisements et dans les installations de surface Application of an Equation of State to Simulating the Thermodynamic Behaviour of Fluids in Reservoirs and Surface Installations

    Directory of Open Access Journals (Sweden)

    Jain C.

    2006-11-01

    Full Text Available La connaissance des propriétés thermodynamiques des fluides pétroliers, en particulier des masses volumiques et des coefficients d'équilibre liquide-vapeur, intervient à divers stades de la production : primaire, secondaire par in-jection de gaz (C02 ou hydrocarbures miscibles, vapeur d'eau, séparation, réseau de collecte et de transport. L'ampleur du domaine de pression et de température à l'intérieur duquel on a besoin de connaître les propriétés des huiles et des gaz à condensat, et le fait que la compo-sition d'ensemble des mélanges diphasiques ne cesse de varier au cours de leur déplacement soit dans les gisements, soit dans les installations d'exploitation, rendent mani-feste l'intérêt de pouvoir calculer ces propriétés, en évi-tant d'avoir recours à des travaux de laboratoire beaucoup trop importants. Pour résoudre ces problèmes, une nouvelle équation d'état appelée Redlich-Kwong Développée (RKD a été mise au point. Au cours de cet exposé, nous verrons que cette équation restitue les enveloppes diphasiques de l'équilibre liquide-vapeur avec une qualité au moins égale à celles des méthodes de Soave et de Peng-Robinson qui jouissent actuellement d'une grande notoriété. L'avantage de ce modèle sur ces dernières méthodes est l'évaluation simultanée des propriétés volumétriques des phases en présence avec une bonne précision, ce qui est d'une grande utilité pour l'application de ce modèle aux problèmes industriels. Knowing the thermodynamic properties of petroleum fluids, and in particular the density and liquid-vapor equilibrium coefficients, is important at different stages of production, i. e. primary production, secondary production by gas flooding (CO2 or miscible hydrocarbons, steam, separation, gathering network and transportation. The pressure and temperature range within which the oil and gas-condensate properties must be known coupled with the fact that the overall composition of

  17. Recovery actinide values

    International Nuclear Information System (INIS)

    Horwitz, E.P.; Delphin, W.H.; Mason, G.W.

    1979-01-01

    A process is described for partitioning and recovering actinide values from acidic waste solutions resulting from reprocessing of irradiated nuclear fuels by adding hydroxylammonium nitrate and hydrazine to the waste solution to adjust the valence of the neptunium and plutonium values in the solution to the +4 oxidation state, thus forming a feed solution and contacting the feed solution with an extractant of di-hexoxyethyl phosphoric acid in an organic diluent whereby the actinide values, most of the rare earth values and some fission product values are taken up by the extractant. Separation is achieved by contacting the loaded extractant with two aqueous strip solutions, a nitric acid solution to selectively strip the americium, curium and rare earth values and an oxalate solution of tetramethylammonium hydrogen oxalate and oxalic acid or trimethylammonium hydrogen oxalate to selectively strip the neptunium, plutonium and fission product values. Uranium values remain in the extractant and may be recovered with a phosphoric acid strip. The neptunium and plutonium values are recovered from the oxalate by adding sufficient nitric acid to destroy the complexing ability of the oxalate, forming a second feed, and contacting the second feed with a second extractant of tricaprylmethylammonium nitrate in an inert diluent whereby the neptunium and plutonium values are selectively extracted. The values are recovered from the extractant with formic acid. (author)

  18. Actinide AMS at DREAMS

    Energy Technology Data Exchange (ETDEWEB)

    Khojasteh, Nasrin B.; Merchel, Silke; Rugel, Georg; Scharf, Andreas; Ziegenruecker, Rene [HZDR, Dresden (Germany); Pavetich, Stefan [HZDR, Dresden (Germany); ANU, Canberra (Australia)

    2016-07-01

    Radionuclides such as {sup 236}U and {sup 239}Pu were introduced into the environment by atmospheric nuclear weapon tests, reactor accidents (Chernobyl, Fukushima), releases from nuclear reprocessing facilities (Sellafield, La Hague), radioactive waste disposal, and accidents with nuclear devices (Palomares, Thule) [1]. Accelerator Mass Spectrometry (AMS) is the most sensitive method to measure these actinides. The DREsden AMS (DREAMS) facility is located at a 6 MV accelerator, which is shared with ion beam analytics and implantation users, preventing major modifications of the accelerator and magnetic analyzers. DREAMS was originally designed for {sup 10}Be, {sup 26}Al, {sup 36}Cl, {sup 41}Ca, and {sup 129}I. To modify the system for actinide AMS, a Time-of-Flight (TOF) beamline at the high-energy side has been installed and performance tests are on-going. Ion beam and detector simulations are carried out to design a moveable ionization chamber. Especially, the detector window and anode dimensions have to be optimized. This ionization chamber will act as an energy detector of the system and its installation is planned as closely as possible to the stop detector of the TOF beamline for highest detection efficiency.

  19. Rare earths and actinides

    International Nuclear Information System (INIS)

    Coqblin, B.

    1982-01-01

    This paper reviews the different properties of rare-earths and actinides, either as pure metals or as in alloys or compounds. Three different cases are considered: (i) First, in the case of 'normal' rare-earths which are characterized by a valence of 3, we discuss essentially the magnetic ordering, the coexistence between superconductivity and magnetism and the properties of amorphous rare-earth systems. (ii) Second, in the case of 'anomalous' rare-earths, we distinguish between either 'intermediate-valence' systems or 'Kondo' systems. Special emphasis is given to the problems of the 'Kondo lattice' (for compounds such as CeAl 2 ,CeAl 3 or CeB 6 ) or the 'Anderson lattice' (for compounds such as TmSe). The problem of neutron diffraction in these systems is also discussed. (iii) Third, in the case of actinides, we can separate between the d-f hybridized and almost magnetic metals at the beginning of the series and the rare-earth like the metals after americium. (orig.)

  20. Program and presentations of the 33th Actinide Days

    International Nuclear Information System (INIS)

    2003-04-01

    The 'Journees des Actinides' (JDA) is an annual conference which provides a forum for discussions on all aspects related to the chemical and physical properties of the actinides. At the 2003 meeting, mainly the following properties were discussed of actinides and a number of actinide compounds and complexes: crystal structure, crystal-phase transformations and transformation temperatures; electrical properties including superconductivity and superconducting transition temperatures; magnetic properties; specific heat and other thermodynamic properties; electronic structure, especially in condensed matter; chemical and physico-chemical properties. The relevant experimental techniques were also dealt with, such as neutron diffraction; X-ray diffraction, in particular using synchrotron radiation; photoemission techniques, electron microscopy and spectroscopy, etc. Altogether 96 contributions were presented, of which 42 were oral presentations and 54 poster presentations. A program of the meeting and texts of both type of presentations were published in electronic form in the PDF format. All contributions were inputted to INIS; the full text of the program and the presentations has been incorporated into the INIS collection of non-conventional literature on CD-ROM. (A.K.)

  1. Study of the behavior of AX-55 resin when used for recovering uranium from solutions formed by attacking low grade minerals with sulfuric acid; Etude du comportement de la resine ax-55 pour la recuperation de l'uranium des solutions d'attaque sulfurique de mineraux a faible teneur

    Energy Technology Data Exchange (ETDEWEB)

    Parly, B; Pottier, P; Rigaud, A

    1959-03-01

    Uranium is recuperated on the anionic resin ACFI AX-55 from solution formed by attacking a Vendean mineral with sulfuric acid. This solution contains 373 mg of uranium acid 15,4 g of SO{sub 4} per litre. The pH is 1,5. The object of the text is on the one hand to study the behaviour of the resin AX,-55 during several absorption and desorption cycles and on the other hand to see whether this resin can be used industrially. The following conclusions are: 1) at the flow rate of 6,6 m{sup 3}/m{sup 2}.h which was employed the resin AX-55 can be used industrially; 2) Its principal advantage is to furnish an concentrated elutriation liquor containing: 15,84 g/1 of U; 3) It has the disadvantage of having a low capacity (approximately 60 per cent of that of Deacidit 'FF'). (author) [French] On recupere sur la resine anionique ACFI AX-55 l'uranium d'une solution d'attaque sulfurique d'un minerai de Vendee. Cette solution contient 373 mg d'uranium et 15,4 g de SO{sub 4} par litre. Son pH est 1,5. Le but de l'essai est, d'une part d'etudier le comportement de la resine AX 55 au cours de plusieurs cycles, d'autre part de verifier que son utilisation est possible industriellement. Les conclusions sont les suivantes: 1) au debit de 6,6 m{sup 3}/m{sup 2}.h utilise, la resine AX 55 peut etre utilisee industriellement; 2) son principal avantage est de fournir une liqueur d'elution concentree: 15,84 g/1 en U; 3) son inconvenient est sa capacite faible (environ 60 pour cent de celle de la Deacidit 'FF'). (auteur)

  2. Medium temperature reaction between lanthanide and actinide carbides and hydrogen; Reaction a temperature moyenne entre les monocarbures de lanthanides et d'actinides et l'hydrogene

    Energy Technology Data Exchange (ETDEWEB)

    Dean, G; Lorenzelli, R; Pascard, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    Hydrogen is fixed reversibly by the lanthanide and actinide mono carbides in the range 25 - 400 C, as for pure corresponding metals. Hydrogen goes into the carbides lattice through carbon vacancies and the total fixed amount is approximately equal to two hydrogen atoms per initial vacancy. Final products c.n thus be considered as carbo-hydrides of general formula M(C{sub 1-x}, H{sub 2x}). The primitive CFC, NaCl type, structure remains unchanged but expands strongly in the case of actinide carbides. With lanthanide carbides, hydrogenation induces a phase transformation with reappearance of the metal structure (HCP). Hydrogen decomposition pressures of all the studied carbo-hydrides are greater than those of the corresponding di-hydrides. (authors) [French] Les monocarbures d'actinides et de lanthanides fixent reversiblement de l'hydrogene a temperature peu elevee, a peu pres dans les memes conditions que les metaux purs correspondants. L'hydrogene penetre dans le reseau des carbures par l'intermediaire des lacunes de carbone, et la quantite totale fixee est approximativement egale a deux atomes d'hydrogene par lacune initiale. Les produits obtenus peuvent donc etre consideres comme des carbohydrures de formule generale M(C{sub 1-x}, H{sub 2x}). La structure d'origine CFC, type NaCl est conservee, mais avec une forte expansion, dans le cas des carbures d'actinides. En revanche, l'hydrogenation entraine un changement de phase cristalline avec retour a la structure du metal (HC) pour les carbures de lanthanides. Tous les carbohydrures etudies ont des tensions de decomposition en hydrogene superieures a celles des dihydrures correspondants. (auteurs)

  3. Étude du comportement structural de l'alliage NC 19 Fe Nb (Inconel 718)

    Science.gov (United States)

    Slama, C.; Cizeron, G.

    1997-03-01

    In the as-received state (following a double treatment at 720 and 620 °C), the structure of INC 718 consists of a γ matrix, intergranular β precipitates and (Nb,Ti)C carbides; moreover, γ{'} and γ{''} phases have precipitated in the matrix. Using different methods, the structural behaviour was analyzed which led to distinguish the temperature ranges in which occurs precipitation or dissolution of β, γ{'} and γ{''} phases on heating and to define the optimum conditions of homogeneization. Furthermore a CCT diagram for INC 718 has been drawn showing the respective precipitation of γ{'}, γ{''} and β phases as a function of the cooling rate applied from 990 °C. L'étude de l'alliage Inconel 718 (NC 19 Fe Nb) a permis de montrer que sa structure, dans l'état de livraison (après double revenu à 720 puis 620 °C), consiste en une matrice γ avec des précipités β intergranulaires et des carbures du type (Nb,Ti) C ; en outre, la matrice contient des précipités des phases γ{''} et γ{'}. L'analyse du comportement structural de l'alliage à l'aide de différentes méthodes physiques a conduit à délimiter les domaines de température dans lesquels interviennent, au chauffage, la précipitation ou la dissolution des phases β, γ{'}, γ{''} et de définir les conditions optimales d'homogénéisation. Le diagramme T.R.C. de l'Inconel 718 a ensuite été tracé : les intervalles de température dans lesquels interviennent les précipitations respectives des phases γ{'}, γ{''} et β en fonction de la vitesse de refroidissement imposée depuis 990 °C, ont ainsi pu être précisés.

  4. Génétique et adaptation : le point des connaissances chez les volailles

    OpenAIRE

    Mignon-Grasteau , Sandrine; Faure, J.M.

    2002-01-01

    De nombreuses études ont porté sur la génétique des capacités d’adaptation des oiseaux, qui ont été modifiées par la domestication, puis la sélection artificielle. Ces études comprennent des comparaisons entre lignées, des estimations de paramètres génétiques et des expériences de sélection. Elles portent sur de nombreux caractères, parmi lesquels le comportement sexuel, alimentaire ou social, la sensibilité au stress. Ces comportements liés aux capacités d’adaptation de l’animal sont général...

  5. Concentration of actinides in the food chain

    International Nuclear Information System (INIS)

    Bulman, R.A.

    1976-06-01

    Considerable concern is now being expressed over the discharge of actinides into the environment. This report presents a brief review of the chemistry of the actinides and examines the evidence for interaction of the actinides with some naturally-occurring chelating agents and other factors which might stimulate actinide concentration in the food chain of man. This report also reviews the evidence for concentration of actinides in plants and for uptake through the gastrointestinal tract. (author)

  6. Set up of an innovative methodology to measure on-line the incineration potential of minor actinides under very high neutron sources in the frame of the future prospects of the nuclear waste transmutation; Mise au point d'une methodologie innovante pour la mesure du potentiel d'incineration d'actinides mineurs sous des sources tres intenses de neutrons, dans la perspective de transmutation des dechets nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Fadil, M

    2003-03-01

    This work deals generally with the problem of nuclear waste management and especially with the transmutation of it to reduce considerably its radiotoxicity potential. The principal objective of this thesis is to show the feasibility to measure on-line the incineration potential of minor actinides irradiated under very high neutron flux. To realize this goal, we have developed fission micro-chambers able to operate, for the first time in the world, in saturation regime under a severe neutron flux. These new chambers use {sup 235}U as an active deposit. They were irradiated in the high flux reactor at Laue-Langevin Institute in Grenoble. The measurement of the saturation current delivered by these chambers during their irradiation for 26 days allowed to evaluate the burn-up of {sup 235}U. We have determined the neutron flux intensity of 1,6 10{sup 15} n.cm{sup -2}.s{sup -1} in the bottom of the irradiation tube called 'V4'. The relative uncertainty of this value is less than 4 %. This is for the first time that such high neutron flux is measured with a fission chamber. To confirm this result, we have also performed independent measurements using gamma spectroscopy of irradiated Nb and Co samples. Both results are in agreement within error bars. Simple Deposit Fission Chambers (SDFC) as above were the reference of the new generation of fission chambers that we have developed in the framework of this thesis: Double Deposit Fission Chambers (DDFC). The reference active deposit was {sup 235}U. The other deposit was the actinide that we wanted to study (e.g. {sup 237}Np and {sup 241}Am). At the end of the thesis, we present some suggestions to ameliorate the operation of the DDFC to be exploited in other transmutation applications in the future. (author)

  7. Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

    Science.gov (United States)

    Veres, Teodor

    Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques

  8. Lanthanide/Actinide Opacities

    Science.gov (United States)

    Hungerford, Aimee; Fontes, Christopher J.

    2018-06-01

    Gravitational wave observations benefit from accompanying electromagnetic signals in order to accurately determine the sky positions of the sources. The ejecta of neutron star mergers are expected to produce such electromagnetic transients, called macronovae (e.g. the recent and unprecedented observation of GW170817). Characteristics of the ejecta include large velocity gradients and the presence of heavy r-process elements, which pose significant challenges to the accurate calculation of radiative opacities and radiation transport. Opacities include a dense forest of bound-bound features arising from near-neutral lanthanide and actinide elements. Here we present an overview of current theoretical opacity determinations that are used by neutron star merger light curve modelers. We will touch on atomic physics and plasma modeling codes that are used to generate these opacities, as well as the limited body of laboratory experiments that may serve as points of validation for these complex atomic physics calculations.

  9. Relativistic studies in actinides

    International Nuclear Information System (INIS)

    Weinberger, P.; Gonis, A.

    1987-01-01

    In this review the theoretical background is given for a relativistic description for actinide systems. A short introduction is given of the density functional theory which forms the basis for a fully relativistic single-particle theory. A section on the Dirac Hamiltonian is followed by a brief summary on group theoretical concepts. Single site scattering is presented such that formal extensions to the case of the presence of an internal (external) magnetic field and/or anisotropic scattering are evident. Multiple scattering is discussed such that it can readily be applied also to the problem of dislocations. In connection with the problem of selfconsistency particular attention is drawn to the use of complex energies. Finally the various theoretical aspects discussed are illustrated through the results of numerical calculations. 101 refs.; 37 figs.; 5 tabs

  10. Examen critique de la théorie de Lawrence Kohlberg du développement de la conscience morale et de l' attitude envers le comportement moral

    Directory of Open Access Journals (Sweden)

    Čabarkapa Milanko

    2009-01-01

    Full Text Available (francuski La relation da le conscience morale et du comportement moral est une des questions théoriques et pratiques traitées pendant une longue période mais qui, de nos jours, font l' objet de recherche de nombreux philosophes, théologiens, sociologues et psychologues. Une contribution particulière y a été apportée par Lawrence Kohlberg et sa théorie des stades de développement de la conscience morale et de l' attitude envers le comportement moral. Sa théorie peut être rangée parmi les théories à l' orientation cognitive qui occupent aujourd' hui une place prépondérante dans l' explication du comportement humain. Dans le cadre de cette théorie le développement de la conscience morale ou de la connaissance morale est considéré en relation avec le développement des aptitudes cognitives, ce développement se déroulant en plusieurs stades ou niveaux à travers les étapes de la vie humaine. Kohlberg distingue trois niveaux principaux du développement de la conscience morale: 1. un niveau préconventiel - où le moral se lie à l' autorité morale externe qui est la source de la peur ou de la peine; 2. Un niveau conventionnel - où la source de la morale est dans la réciprocité établie dans le cadre de la communication interpersonnelle, des relations sociales et des normes acceptées dans la société; 3. niveau post-conventiel - où la personne construit et accepte les principes universels de justice et les plus hautes valeurs humaines qui s' appliquent à l' ensemble de l' humanité. Dans le cadre de la théorie de Kohlberg une importance théorique et pratique est attribuée à l' analyse des conditions et des facteurs psychologiques permettant une transition de la conscience morale au comportement moral (le raisonnement moral, la prise de décisions, la prise de responsabilité, de même qu' à l' analyse de la quasi-obligation et d' autres circonstances qui empêchent cette transition. Les psychologues estiment que

  11. Projected benefits of actinide partitioning

    International Nuclear Information System (INIS)

    Braun, C.; Goldstein, M.

    1976-05-01

    Possible benefits that could accrue from actinide separation and transmutations are presented. The time frame for implementing these processes is discussed and the expected benefits are qualitatively described. These benefits are provisionally quantified in a sample computation

  12. Environmental research on actinide elements

    International Nuclear Information System (INIS)

    Pinder, J.E. III; Alberts, J.J.; McLeod, K.W.; Schreckhise, R.G.

    1987-08-01

    The papers synthesize the results of research sponsored by DOE's Office of Health and Environmental Research on the behavior of transuranic and actinide elements in the environment. Separate abstracts have been prepared for the 21 individual papers

  13. Properties of minor actinide nitrides

    International Nuclear Information System (INIS)

    Takano, Masahide; Itoh, Akinori; Akabori, Mitsuo; Arai, Yasuo; Minato, Kazuo

    2004-01-01

    The present status of the research on properties of minor actinide nitrides for the development of an advanced nuclear fuel cycle based on nitride fuel and pyrochemical reprocessing is described. Some thermal stabilities of Am-based nitrides such as AmN and (Am, Zr)N were mainly investigated. Stabilization effect of ZrN was cleary confirmed for the vaporization and hydrolytic behaviors. New experimental equipments for measuring thermal properties of minor actinide nitrides were also introduced. (author)

  14. Etude Du Comportement Dynamique D'un Systeme De Pompage ...

    African Journals Online (AJOL)

    SIMULINK le comportement dynamique d'un système de pompage composé d'un générateur photovoltaïque, d'un onduleur, d'un moteur à induction et d'une pompe centrifuge. Le modèle global du système est bouclé : la sortie tension du GPV est ...

  15. Évaluation des efforts de réduction de la violence en Afrique du Sud ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    21 juil. 2015 ... L'évaluation des interventions complexes de réduction de la violence comporte de multiples défis, qu'il s'agisse de négocier des relations entre des partenaires aux objectifs différents ou de favoriser l'engagement et l'acception de la communauté en ce qui a trait au processus.

  16. Mécanique des sols et des roches

    CERN Document Server

    Vullier, Laurent; Zhao, Jian

    2016-01-01

    La mécanique des sols et la mécanique des roches sont des disciplines généralement traitées séparément dans la littérature. Pour la première fois, un traité réunit ces deux spécialités, en intégrant également les connaissances en lien avec les écoulements souterrains et les transferts thermiques. A la fois théorique et pratique, cet ouvrage propose tout d'abord une description détaillée de la nature et de la composition des sols et des roches, puis s'attache à la modélisation de problèmes aux conditions limites et présente les essais permettant de caractériser les sols et les roches, tant d'un point de vue mécanique qu'hydraulique et thermique. La problématique des sols non saturés et des écoulements multiphasiques est également abordée. Une attention particulière est portée aux lois de comportement mécanique et à la détermination de leurs paramètres par des essais in situ et en laboratoire, et l'ouvrage offre également une présentation détaillée des systèmes de classi...

  17. Sol-gel chemistry applied to the synthesis of polymetallic oxides including actinides reactivity and structure from solution to solid state; Synthese par voie douce d'oxydes polymetalliques incluant des actinides: reactivite et structure de la solution au solide

    Energy Technology Data Exchange (ETDEWEB)

    Lemonnier, St

    2006-02-15

    Minor actinides transmutation is studied at present in order to reduce the radiotoxicity of nuclear waste and the assessment of its technical feasibility requires specific designed materials. When considering americium, yttria stabilized zirconia (Am{sup III} YII Zriv)Or{sub x} is among the ceramic phases that one which presents the required physico-chemical properties. An innovative synthesis of this mixed oxide by sol-gel process is reported in this manuscript. The main aim of this work is to adjust the reactivity of the different metallic cations in aqueous media using complexing agent, in order to initiate a favourable interaction for a homogeneous elements repartition in the forming solid phase. The originality of the settled synthesis lies on an in-situ formation of a stable and monodisperse nano-particles dispersion in the presence of acetylacetone. The main reaction mechanisms have been identified: the sol stabilisation results from an original interaction between the three compounds (Zrly, trivalent cations and acetylacetone). The sol corresponds to a structured system at the nanometer scale for which zirconium and trivalent cations are homogeneously dispersed, preliminary to the sol-gel transition. Furthermore, preliminary studies were carried out with a view to developing materials. They have demonstrated that numerous innovative and potential applications can be developed by taking advantage of the direct and controlled formation of the sol and by adapting the sol-gel transition. The most illustrating result is the preparation of a sintered pellet with the composition Am0,13Zro,73Yo,0901,89 using this approach. (author)

  18. Actinide colloid generation in groundwater. Part 2

    International Nuclear Information System (INIS)

    Kim, J.I.

    1991-01-01

    The progress made in the investigation of actinide colloid generation in groundwater is summarized and discussed with particular examples relevant to an understanding of the migration behaviour of actinides in natural aquifer systems. The first part deals with the characterization of colloids: groundwater colloids, actinide real-colloids and actinide pseudocolloids. The second part concentrates on the generation processes and migration behaviour of actinide pseudo colloids, which are discussed with some notable experimental examples. Importance is stressed more on the chemical aspects of the actinide colloid generation in groundwater. This work is a contribution to the CEC Mirage II project, in particular the complexation and colloids research area

  19. Evaluation de la performance des TRC et des solutions hybrides dans le cadre de la réparation et le renforcement de poutres en béton armé

    OpenAIRE

    SI LARBI, A.; HAMELIN, P.; CONTAMINE, R.

    2011-01-01

    Le présent travail, à caractère exploratoire, vise à mettre en évidence l’intérêt de solutions alternatives au carbone-époxy dans le cadre de la réparation de structures en béton armé vis-à-vis de la flexion par l’emploi de matériaux composites de type textile mortier(TRC). Il a permis de mettre en avant les bonnes dispositions des solutions hybrides que ce soit en termes de comportement ultime ou de comportement en service avec des niveaux de performances très comparables aux ...

  20. In-situ test of the static behaviour of a pile foundation subjected to thermo-mechanical solicitations. Intermediate report of January 1999; Test en conditions reelles du comportement statique d`un pieu soumis a des sollicitations thermo-mecaniques. Rapport intermediaire de janvier 1999

    Energy Technology Data Exchange (ETDEWEB)

    Moreni, M.; Laloui, L.; Steinmann, G. [and others

    1999-10-01

    , le transformant ainsi en pieu echangeur. Des capteurs de force, de deformation et de temperature ont ete installes afin d`evaluer l`effet de sollicitations thermiques sur la statique du pieu. La phase initiale du projet, terminee en mai 1998, comprenait la conception et la realisation du pieu echangeur ainsi que son instrumentation; la phase suivante, qui se termine un mois apres la parution du present rapport, concerne une serie de sollicitations thermiques appliquees au pieu, appelees tests, pendant cette phase de construction du batiment. Le poids supporte par le pieu a ainsi augmente d`un test a l`autre. Cette double sollicitation produit le couplage thermo-mecanique. Ce rapport presente toutes les mesures effectuees au cours des 6 tests, entre la construction de chaque etage. La variation de temperature appliquee au pieu etait de 15 K a chaque test, sauf pour le premier pour lequel elle etait de 22 K (la base du batiment n`etant pas encore construite). Les temperatures, les contraintes et les deformations ont ete mesurees a differentes profondeurs du pieu. Un enregistrement continu des mesures thermiques relatives au chauffage du pieu (temperatures, debit, puissances electrique et thermique) a egalement ete realise. Des carottages soniques et un controle par la methode de reflexion ont ete effectues pour determiner le module d`elasticite du pieu et la qualite de son beton. La derniere phase du projet (mars - decembre 1999) portera sur l`interpretation des mesures et l`evaluation de l`influence de variations de temperature sur la portance du pieu

  1. Actinides and heavy fermions

    International Nuclear Information System (INIS)

    Smith, J.L.; Fisk, Z.; Ott, H.R.

    1987-01-01

    The actinide series of elements begins with f-shell electrons forming energy bands, contributing to the bonding, and possessing no magnetic moments. At americium the series switches over to localized f electrons with magnetic moments. In metallic compounds this crossover of behavior can be modified and studied. In this continuum of behavior a few compounds on the very edge of localized f-electron behavior exhibit enormous electronic heat capacities at low temperatures. This is associated with an enhanced thermal mass of the conduction electrons, which is well over a hundred times the free electron mass, and is what led to the label heavy fermion for such compounds. A few of these become superconducting at even lower temperatures. The excitement in this field comes from attempting to understand how this heaviness arises and from the likelihood that the superconductivity is different from that of previously known superconductors. The effects of thorium impurities in UBe 13 were studied as a representative system for studying the nature of the superconductivity

  2. Actinide burning and waste disposal

    Energy Technology Data Exchange (ETDEWEB)

    Pigford, T H [University of California, Berkeley, CA (United States)

    1990-07-01

    Here we review technical and economic features of a new proposal for a synergistic waste-management system involving reprocessing the spent fuel otherwise destined for a U.S. high-level waste repository and transmuting the recovered actinides in a fast reactor. The proposal would require a U.S. fuel reprocessing plant, capable of recovering and recycling all actinides, including neptunium americium, and curium, from LWR spent fuel, at recoveries of 99.9% to 99.999%. The recovered transuranics would fuel the annual introduction of 14 GWe of actinide-burning liquid-metal fast reactors (ALMRs), beginning in the period 2005 to 2012. The new ALMRs would be accompanied by pyrochemical reprocessing facilities to recover and recycle all actinides from discharged ALMR fuel. By the year 2045 all of the LWR spent fuel now destined f a geologic repository would be reprocessed. Costs of constructing and operating these new reprocessing and reactor facilities would be borne by U.S. industry, from the sale of electrical energy produced. The ALMR program expects that ALMRs that burn actinides from LWR spent fuel will be more economical power producers than LWRs as early as 2005 to 2012, so that they can be prudently selected by electric utility companies for new construction of nuclear power plants in that era. Some leaders of DOE and its contractors argue that recovering actinides from spent fuel waste and burning them in fast reactors would reduce the life of the remaining waste to about 200-300 years, instead of 00,000 years. The waste could then be stored above ground until it dies out. Some argue that no geologic repositories would be needed. The current view expressed within the ALMR program is that actinide recycle technology would not replace the need for a geologic repository, but that removing actinides from the waste for even the first repository would simplify design and licensing of that repository. A second geologic repository would not be needed. Waste now planned

  3. Actinide speciation in the environment

    International Nuclear Information System (INIS)

    Choppin, G.R.

    2007-01-01

    Nuclear test explosions and nuclear reactor wastes and accidents have released large amounts of radioactivity into the environment. Actinide ions in waters often are not in a state of thermodynamic equilibrium and their solubility and migration behavior is related to the form in which the nuclides are introduced into the aquatic system. Chemical speciation, oxidation state, redox reactions, and sorption characteristics are necessary in predicting solubility of the different actinides, their migration behaviors and their potential effects on marine biota. The most significant of these variables is the oxidation state of the metal ion as the simultaneous presence of more than one oxidation state for some actinides in a solution complicates actinide environmental behavior. Both Np(V)O 2 + and Pu(V)O 2 + , the most significant soluble states in natural oxic waters, are relatively noncomplexing and resistant to hydrolysis and subsequent precipitation. The solubility of NpO 2 + can be as high as 10 -4 M while that of PuO 2 + is much more limited by reduction to the insoluble tetravalent species, Pu(OH) 4 , (pK sp ≥56) but which can be present in the pentavalent form in aqautic phases as colloidal material. The solubility of hexavalent UO 2 2+ in sea water is relatively high due to formation of carbonate complexes. The insoluble trivalent americium hydroxocarbonate, Am(OH)(CO 3 ) is the limiting species for the solubility of Am(III) in sea water. Thorium(IV) is present as Th(OH) 4 , in colloidal form. The chemistry of actinide ions in the environment is reviewed to show the spectrum of reactions that can occur in natural waters which must be considered in assessing the environmental behavior of actinides. Much is understood about sorption of actinides on surfaces, the mode of migration of actinides in such waters and the potential effects of these radioactive species on marine biota, but much more understanding of the behavior of the actinides in the environment is

  4. Actinide burning and waste disposal

    International Nuclear Information System (INIS)

    Pigford, T.H.

    1990-01-01

    Here we review technical and economic features of a new proposal for a synergistic waste-management system involving reprocessing the spent fuel otherwise destined for a U.S. high-level waste repository and transmuting the recovered actinides in a fast reactor. The proposal would require a U.S. fuel reprocessing plant, capable of recovering and recycling all actinides, including neptunium americium, and curium, from LWR spent fuel, at recoveries of 99.9% to 99.999%. The recovered transuranics would fuel the annual introduction of 14 GWe of actinide-burning liquid-metal fast reactors (ALMRs), beginning in the period 2005 to 2012. The new ALMRs would be accompanied by pyrochemical reprocessing facilities to recover and recycle all actinides from discharged ALMR fuel. By the year 2045 all of the LWR spent fuel now destined f a geologic repository would be reprocessed. Costs of constructing and operating these new reprocessing and reactor facilities would be borne by U.S. industry, from the sale of electrical energy produced. The ALMR program expects that ALMRs that burn actinides from LWR spent fuel will be more economical power producers than LWRs as early as 2005 to 2012, so that they can be prudently selected by electric utility companies for new construction of nuclear power plants in that era. Some leaders of DOE and its contractors argue that recovering actinides from spent fuel waste and burning them in fast reactors would reduce the life of the remaining waste to about 200-300 years, instead of 00,000 years. The waste could then be stored above ground until it dies out. Some argue that no geologic repositories would be needed. The current view expressed within the ALMR program is that actinide recycle technology would not replace the need for a geologic repository, but that removing actinides from the waste for even the first repository would simplify design and licensing of that repository. A second geologic repository would not be needed. Waste now planned

  5. Soil contamination. part 1. changes in the humidity of non saturated soils after reject in a limited space. part 2. movements of radioactive ions in non saturated soils after reject in a limited space; Contamination des sols (1. partie). Evolution de l'humidite dans les sols non satures apres rejets sur une surface limitee. (2. partie). Comportement des ions radioactifs dans les sols non satures apres rejets d'eau sur une surface limitee

    Energy Technology Data Exchange (ETDEWEB)

    Rancon, D [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1972-07-01

    upon the counting rate of radioactivity. This method which have allowed to get various results about {sup 131}I and {sup 85}Sr can be generalized to other radioisotopes and other soils. They are applicable to radiological safety of sites studies : Testing storage plants, estimate of accidents hazards and protection of subterranean waters. (author) [French] II est important, dans les etudes de surete radiologique de sites, de connaitre les mouvements d'eau dans les terrains non satures surmontant la nappe aquifere, cette tranche de terrain aere pouvant servir de protection contre la contamination de la nappe. L'utilisation d'humidimetres a neutrons a permis de construire graphiquement les coupes des etats hydriques du terrain et les evolutions dans le temps du volume du sol mouille a partir d'un rejet affectant une superficie restreinte. On mesure aussi les gradients d'humidite, les cinetiques d'assechement, la capacite de retention du sol et la teneur en eau gravifique suspendue en en equilibre avec la charge d'eau. L'etat hydrique initial influence la vitesse d'infiltration et non la vitesse d'avancement du front d'humectation, on peut donc calculer la quantite d'eau accumulable par le terrain. Apres l'arret du rejet, le volume de sol mouille evolue jusqu'a un etat d'equilibre limite par le front d'humectation, les redistributions d'humidite s'effectuant seulement au sein de ce volume; ainsi, en cas de rejet de liquide radioactif, les ions contaminants resteront confines dans un volume mesurable limite par le front d'humectation. Partie 2. Pour faire suite au rapport sur les mouvements d'eau dans les sols non satures apres rejet sur une surface limitee - CEA R 3635 (1) - on etudie les mouvements des ions radioactifs dans ces sols en utilisant un anion et un cathion caracteristiques: l'iode 131 et le strontium 85. La methode est basee sur la mesure simultanee des fronts d'humidite et d'activite au moyen d'humidimetre a neutrons et d'une sonde d'activite specialement

  6. 33rd Actinide Separations Conference

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, L M; Wilk, P A

    2009-05-04

    Welcome to the 33rd Actinide Separations Conference hosted this year by the Lawrence Livermore National Laboratory. This annual conference is centered on the idea of networking and communication with scientists from throughout the United States, Britain, France and Japan who have expertise in nuclear material processing. This conference forum provides an excellent opportunity for bringing together experts in the fields of chemistry, nuclear and chemical engineering, and actinide processing to present and discuss experiences, research results, testing and application of actinide separation processes. The exchange of information that will take place between you, and other subject matter experts from around the nation and across the international boundaries, is a critical tool to assist in solving both national and international problems associated with the processing of nuclear materials used for both defense and energy purposes, as well as for the safe disposition of excess nuclear material. Granlibakken is a dedicated conference facility and training campus that is set up to provide the venue that supports communication between scientists and engineers attending the 33rd Actinide Separations Conference. We believe that you will find that Granlibakken and the Lake Tahoe views provide an atmosphere that is stimulating for fruitful discussions between participants from both government and private industry. We thank the Lawrence Livermore National Laboratory and the United States Department of Energy for their support of this conference. We especially thank you, the participants and subject matter experts, for your involvement in the 33rd Actinide Separations Conference.

  7. 33rd Actinide Separations Conference

    International Nuclear Information System (INIS)

    McDonald, L.M.; Wilk, P.A.

    2009-01-01

    Welcome to the 33rd Actinide Separations Conference hosted this year by the Lawrence Livermore National Laboratory. This annual conference is centered on the idea of networking and communication with scientists from throughout the United States, Britain, France and Japan who have expertise in nuclear material processing. This conference forum provides an excellent opportunity for bringing together experts in the fields of chemistry, nuclear and chemical engineering, and actinide processing to present and discuss experiences, research results, testing and application of actinide separation processes. The exchange of information that will take place between you, and other subject matter experts from around the nation and across the international boundaries, is a critical tool to assist in solving both national and international problems associated with the processing of nuclear materials used for both defense and energy purposes, as well as for the safe disposition of excess nuclear material. Granlibakken is a dedicated conference facility and training campus that is set up to provide the venue that supports communication between scientists and engineers attending the 33rd Actinide Separations Conference. We believe that you will find that Granlibakken and the Lake Tahoe views provide an atmosphere that is stimulating for fruitful discussions between participants from both government and private industry. We thank the Lawrence Livermore National Laboratory and the United States Department of Energy for their support of this conference. We especially thank you, the participants and subject matter experts, for your involvement in the 33rd Actinide Separations Conference.

  8. Thermal-hydraulics of actinide burner reactors

    International Nuclear Information System (INIS)

    Takizuka, Takakazu; Mukaiyama, Takehiko; Takano, Hideki; Ogawa, Toru; Osakabe, Masahiro.

    1989-07-01

    As a part of conceptual study of actinide burner reactors, core thermal-hydraulic analyses were conducted for two types of reactor concepts, namely (1) sodium-cooled actinide alloy fuel reactor, and (2) helium-cooled particle-bed reactor, to examine the feasibility of high power-density cores for efficient transmutation of actinides within the maximum allowable temperature limits of fuel and cladding. In addition, calculations were made on cooling of actinide fuel assembly. (author)

  9. Illustration de systèmes de surveillance de deuxième génération du VIH et IST à travers une étude de comportement et une étude de séroprévalence dans les Territoires français du Pacifique Sud

    OpenAIRE

    Laroche, Sophie

    2007-01-01

    Ce mémoire se penche sur la prévalence du VIH/SIDA et d'autres IST [infections sexuellement transmissibles] parmi les jeunes dans les Territoires français du Pacifique Sud. Le présent rapport expose les principes des SDG [systèmes de surveillance de deuxième génération], illustrés par deux types d'enquêtes : une enquête de comportements et une enquête de séroprévalence. [...] L'enquête de comportements intitulée: "Enquête sur les attitudes, comportements et croyance du VIH/SIDA parmi les j...

  10. Fusion barrier characteristics of actinides

    Science.gov (United States)

    Manjunatha, H. C.; Sridhar, K. N.

    2018-03-01

    We have studied fusion barrier characteristics of actinide compound nuclei with atomic number range 89 ≤ Z ≤ 103 for all projectile target combinations. After the calculation of fusion barrier heights and positions, we have searched for their parameterization. We have achieved the empirical formula for fusion barrier heights (VB), positions (RB), curvature of the inverted parabola (ħω) of actinide compound nuclei with atomic number range 89 ≤ Z ≤ 103 for all projectile target combinations (6 projectile target combinations. The values produced by the present formula are also compared with experiments. The present pocket formula produces fusion barrier characteristics of actinides with the simple inputs of mass number (A) and atomic number (Z) of projectile-targets.

  11. ALMR potential for actinide consumption

    International Nuclear Information System (INIS)

    Cockey, C.L.; Thompson, M.L.

    1992-01-01

    The Advanced Liquid Metal Reactor (ALMR) is a US Department of Energy (DOE) sponsored fast reactor design based on the Power Reactor, Innovative Small Module (PRISM) concept originated by General Electric. This reactor combines a high degree of passive safety characteristics with a high level of modularity and factory fabrication to achieve attractive economics. The current reference design is a 471 MWt modular reactor fueled with ternary metal fuel. This paper discusses actinide transmutation core designs that fit the design envelope of the ALMR and utilize spent LWR fuel as startup material and for makeup. Actinide transmutation may be accomplished in the ALMR core by using either a breeding or burning configuration. Lifetime actinide mass consumption is calculated as well as changes in consumption behavior throughout the lifetime of the reactor. Impacts on system operational and safety performance are evaluated in a preliminary fashion. Waste disposal impacts are discussed. (author)

  12. Thin layers in actinide research

    International Nuclear Information System (INIS)

    Gouder, T.

    1998-01-01

    Surface science research at the ITU is focused on the synthesis and surface spectroscopy studies of thin films of actinides and actinide compounds. The surface spectroscopies used are X-ray and ultra violet photoelectron spectroscopy (XPS and UPS, respectively), and Auger electron spectroscopy (AES). Thin films of actinide elements and compounds are prepared by sputter deposition from elemental targets. Alloy films are deposited from corresponding alloy targets and could be used, in principle, as replicates of these targets. However, there are deviations between alloy film and target composition, which depend on the deposition conditions, such as pressure and target voltage. Mastering of these effects may allow us to study stoichiometric film replicates instead of thick bulk compounds. As an example, we discuss the composition of U-Ni films prepared from a UNi 5 target. (orig.)

  13. Nuclear waste forms for actinides

    Science.gov (United States)

    Ewing, Rodney C.

    1999-01-01

    The disposition of actinides, most recently 239Pu from dismantled nuclear weapons, requires effective containment of waste generated by the nuclear fuel cycle. Because actinides (e.g., 239Pu and 237Np) are long-lived, they have a major impact on risk assessments of geologic repositories. Thus, demonstrable, long-term chemical and mechanical durability are essential properties of waste forms for the immobilization of actinides. Mineralogic and geologic studies provide excellent candidate phases for immobilization and a unique database that cannot be duplicated by a purely materials science approach. The “mineralogic approach” is illustrated by a discussion of zircon as a phase for the immobilization of excess weapons plutonium. PMID:10097054

  14. DEFINITION, MESURE ET PILOTAGE DE LA PERFORMANCE CLIENT-FOURNISSEUR : DES FREINS AU « PARTENARIAT INTERNE » ENTRE ACHETEURS ET OPERATIONNELS ?

    OpenAIRE

    Sebti , Hicham

    2015-01-01

    International audience; Le présent article s’intéresse à la manière dont s’organisent les liens entre les acheteurs et les clients internes autour de la définition, des leviers et des dispositifs de pilotage de la performance client-fournisseur. Nous interrogeons la diversité des représentations de la performance, des activités pour la réaliser et des usages des dispositifs de gestion qui servent de fondement aux interprétations de ce qui est performant et orientent les comportements. Nous so...

  15. Détermination des propriétés mécaniques en cisaillement de la rate et du pancréas de porc

    OpenAIRE

    NOGUER, L

    2011-01-01

    Le réalisme des simulations chirurgicales, dans le domaine biomédical, et des simulations de crash tests, dans celui de la sécurité des transports, est étroitement lié à une bonne connaissance des propriétés mécaniques des organes, en particulier, des organes mous du corps humain. L'abdomen est une région anatomique sur laquelle se focalisent actuellement d'importants efforts de recherche et alors que de nombreuses données sur le comportement mécanique du foie et du rein sont rapportées depui...

  16. Synthèse des approches probabilistes de la Life Time Value et premières propositions d'extension

    OpenAIRE

    Herbert Castéran

    2004-01-01

    La recherche marketing s’est longtemps caractérisée par son approche statique des comportements et attitudes des clientèles. Elle offre classiquement une analyse de ceux-ci pouvant conduire, dans les meilleurs cas, à une segmentation des publics. Toutefois elle éprouve des difficultés à se situer dans des approches résolument dynamiques. Audelà de méthodes sans réel fondement, la principale option retenue, pour ce faire, est celle des modèles économétriques (modèles de choix discrets, modèles...

  17. Extraction chromatogrpahy of actinides, ch. 7

    International Nuclear Information System (INIS)

    Mueller, W.

    1975-01-01

    This review on extraction chromatography of actinides emphasizes the important usage of neutral (Tributylphosphate), basic (substituted ammonium salts), and acidic (HDEHP) extractants, and their application to separations of actinides in the di-to hexavalent oxidation state. Furthermore, the actinide extraction by ketones, ethers, alcohols and β-diketones is discussed

  18. Actinides integral measurements on FCA assemblies

    International Nuclear Information System (INIS)

    Mukaiyama, Takehiko; Okajima, Shigeaki

    1984-01-01

    Actinide integral measurements were performed on eight assemblies of FCA where neutron energy spectra were shifted systematically from soft to hard in order to evaluate and modify the nuclear cross section data of major actinides. Experimental values on actinide fission rates and sample reactivity worths are compared with the calculated values using JENDL-2 and ENDF/B-V (or IV) data sets. (author)

  19. L'optimisation des ressources : risques et possibilités pour la ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    jmarcil

    il y a modulation des risques. De nombreux bailleurs de fonds investissent de façon soutenue dans la recherche au service du développement, reconnaissant les risques inévitables que cela comporte. Ils estiment souvent que la meilleure manière d'aborder l'optimisation des ressources consacrées à la recherche est de ...

  20. Etat Des Lieux De La Reglementation Relative A L'homologation ...

    African Journals Online (AJOL)

    Notre étude a comporté d'une part une revue de textes législatifs et réglementaires sur les laits infantiles tant au plan national qu'international et une phase d'enquête transversale dans le district d'Abidjan, auprès des officines privées de pharmacie et des grossistes répartiteurs privés de produits pharmaceutiques.Il ressort ...

  1. Moessbauer effect studies with actinides

    International Nuclear Information System (INIS)

    Stone, J.A.

    1966-01-01

    Moessbauer resonance studies in the actinide elements offer a new technique for measuring solid-state properties to a region of the periodic chart where such information is relatively sparse. It is well known that the actinides, the elements with atomic numbers from 90 to 103, form a transition series due to filling of the 5f electron shell, analogous to the rare-earth series in which the 4f shell is filled. Like the rare earths, the actinide metals and compounds are expected to exhibit a variety of interesting magnetic properties, but, unlike the rare earths, there have been few studies of the magnetic behaviour of actinides, and these properties are largely unknown. The chemical properties of the actinides have been studied somewhat more extensively, and, in contrast to the rare earths, form a multiplicity of stable valence states, especially in the lighter members of the series. It is just these properties, magnetic and chemical, for which the Moessbauer effect is a valuable probe, sensitive to the magnetic and electric environment of an atom. The rare-earth series has been a particularly fruitful region in terms of the number of elements which have been shown to exhibit the Moessbauer effect, and for this reason the exploitation of the Moessbauer effect to yield new solid-state and chemical information on the rare earths is a highly active field of research today. There is every reason to believe that the actinides can be similarly studied by the Moessbauer effect. 43 refs, 6 figs, 4 tabs

  2. Actinide cation-cation complexes

    International Nuclear Information System (INIS)

    Stoyer, N.J.; Seaborg, G.T.

    1994-12-01

    The +5 oxidation state of U, Np, Pu, and Am is a linear dioxo cation (AnO 2 + ) with a formal charge of +1. These cations form complexes with a variety of other cations, including actinide cations. Other oxidation states of actinides do not form these cation-cation complexes with any cation other than AnO 2 + ; therefore, cation-cation complexes indicate something unique about AnO 2 + cations compared to actinide cations in general. The first cation-cation complex, NpO 2 + ·UO 2 2+ , was reported by Sullivan, Hindman, and Zielen in 1961. Of the four actinides that form AnO 2 + species, the cation-cation complexes of NpO 2 + have been studied most extensively while the other actinides have not. The only PuO 2 + cation-cation complexes that have been studied are with Fe 3+ and Cr 3+ and neither one has had its equilibrium constant measured. Actinides have small molar absorptivities and cation-cation complexes have small equilibrium constants; therefore, to overcome these obstacles a sensitive technique is required. Spectroscopic techniques are used most often to study cation-cation complexes. Laser-Induced Photacoustic Spectroscopy equilibrium constants for the complexes NpO 2 + ·UO 2 2+ , NpO 2 + ·Th 4+ , PuO 2 + ·UO 2 2+ , and PuO 2 + ·Th 4+ at an ionic strength of 6 M using LIPAS are 2.4 ± 0.2, 1.8 ± 0.9, 2.2 ± 1.5, and ∼0.8 M -1

  3. Preliminary considerations concerning actinide solubilities

    International Nuclear Information System (INIS)

    Newton, T.W.; Bayhurst, B.P.; Daniels, W.R.; Erdal, B.R.; Ogard, A.E.

    1980-01-01

    Work at the Los Alamos Scientific Laboratory on the fundamental solution chemistry of the actinides has thus far been confined to preliminary considerations of the problems involved in developing an understanding of the precipitation and dissolution behavior of actinide compounds under environmental conditions. Attempts have been made to calculate solubility as a function of Eh and pH using the appropriate thermodynamic data; results have been presented in terms of contour maps showing lines of constant solubility as a function of Eh and pH. Possible methods of control of the redox potential of rock-groundwater systems by the use of Eh buffers (redox couples) is presented

  4. Orbital effects in actinide systems

    International Nuclear Information System (INIS)

    Lander, G.H.

    1983-01-01

    Actinide magnetism presents a number of important challenges; in particular, the proximity of 5f band to the Fermi energy gives rise to strong interaction with both d and s like conduction electrons, and the extended nature of the 5f electrons means that they can interact with electron orbitals from neighboring atoms. Theory has recently addressed these problems. Often neglected, however, is the overwhelming evidence for large orbital contributions to the magnetic properties of actinides. Some experimental evidence for these effects are presented briefly in this paper. They point, clearly incorrectly, to a very localized picture for the 5f electrons. This dichotomy only enhances the nature of the challenge

  5. Study of the effect of the nature of aggregates on the mechanical behaviour of the concrete in hot and dry zones «Contribution of the curing» Etude de l’effet de la nature des granulats sur le comportement mécanique du béton en zones chaudes et arides «Contribution de la cure»

    Directory of Open Access Journals (Sweden)

    Bendjillali K.

    2012-09-01

    Full Text Available Laghouat est parmi les villes de l’Algérie riches en matériaux de différentes natures, tels que les roches calcaires massives et les matériaux alluvionnaires meubles siliceux et silico-calcaires. L’objectif premier de ce travail est d’établir une comparaison des performances mécaniques des bétons préparés avec de granulats de natures différentes. Nôtre second objectif est l’étude de l’influence de la cure sur la résistance à la compression et la résistance à la flexion des bétons étudiés. Les échantillons sont conservés sous un climat chaud et sec réel qui est le climat de Laghouat. Nous avons utilisé comme cure: le film plastique, la toile de jute mouillée et l’immersion dans l’eau. A travers ce travail expérimental, nous avons pu constater que les meilleures résistances à la compression sont obtenues dans les bétons à sable siliceux et celles à la flexion sont obtenues dans les bétons à granulats calcaires. La conservation du béton dans une ambiance aride sans protection augmente sa résistance mécanique à jeune âge, mais à long terme, cette dernière chute d’une façon significative. L’étude a mis en évidence la nécessité de l’emploi d’un super plastifiant et de l’application immédiate de la cure pour le bétonnage en climat chaud. Laghouat is among the cities of Algeria rich in materials of various natures, such as the massive limestone rocks and the natural river materials. The first objective of this work is to establish a comparison of the mechanical performances between concretes with aggregates of different natures. The second objective is to study the effect of curing on the compressive and the flexural strength of concretes. Samples are conserved under a real hot and dry climate which is the climate of Laghouat. We used as curing: plastic film, wet hessian and immersing in water. Through this work, we noticed that the best compressive strengths are obtained in concretes

  6. Les comportements face au VIH/sida parmi les migrants originaires d'Afrique subsaharienne en Suisse : Enquête ANSWER 2013-2014

    OpenAIRE

    Simonson, t.; Dubois-Arber, F.; Jeannin, A.; Bodenmann, P.; Bize, R.

    2015-01-01

    L'enquête Internet ANSWER (African Net Survey WE Respond!) auprès des migrants provenant d'Afrique subsaharienne (ASS) a été menée entre septembre 2013 et février 2014, sur mandat de l'OFSP et avec la collaboration de l'ASS. Cette enquête s'inscrit dans le cadre du mandat de surveillance épidémiologique de deuxième génération du VIH et des autres IST auquel l'IUMSP participe activement. Le but de cette enquête a été de décrire dans cette population les connaissances, attitudes et comportement...

  7. Optimiser la validité des comportements observés sur simulateur de conduite : Etude des interactions entre Immersion, présence et comportement.

    OpenAIRE

    Deniaud , Christophe

    2017-01-01

    In the field of driving, the use of simulation in virtual environment is based at present on considerations of road safety and usability of systems of assistance to the driving. Driving simulators therefore make it possible to study human behavior under different conditions fixed experimentally. A major advantage of the simulation is that it does not expose the subject to objective risk and that the test conditions are "easily" implemented and manipulated. The use of simulation nevertheless r...

  8. Safe actinide disposition in molten salt reactors

    International Nuclear Information System (INIS)

    Gat, U.

    1997-01-01

    Safe molten salt reactors (MSR) can readily accommodate the burning of all fissile actinides. Only minor compromises associated with plutonium are required. The MSRs can dispose safely of actinides and long lived isotopes to result in safer and simpler waste. Disposing of actinides in MSRs does increase the source term of a safety optimized MSR. It is concluded that the burning and transmutation of actinides in MSRs can be done in a safe manner. Development is needed for the processing to handle and separate the actinides. Calculations are needed to establish the neutron economy and the fuel management. 9 refs

  9. Burning actinides in very hard spectrum reactors

    International Nuclear Information System (INIS)

    Robinson, A.H.; Shirley, G.W.; Prichard, A.W.; Trapp, T.J.

    1978-01-01

    The major unresolved problem in the nuclear industry is the ultimate disposition of the waste products of light water reactors. The study demonstrates the feasibility of designing a very hard spectrum actinide burner reactor (ABR). A 1100 MW/sub t/ ABR design fueled entirely with actinides reprocessed from light water reactor (LWR) wastes is proposed as both an ultimate disposal mechanism for actinides and a means of concurrently producing usable power. Actinides from discharged ABR fuel are recycled to the ABR while fission products are routed to a permanent repository. As an integral part of a large energy park, each such ABR would dispose of the waste actinides from 2 LWRs

  10. Research on the chemical speciation of actinides

    International Nuclear Information System (INIS)

    Jung, Euo Chang; Park, K. K.; Cho, H. R.

    2010-04-01

    A demand for the safe and effective management of spent nuclear fuel and radioactive waste generated from nuclear power plant draws increasing attention with the growth of nuclear power industry. The objective of this project is to establish the basis of research on the actinide chemistry by using advanced laser-based highly sensitive spectroscopic systems. Researches on the chemical speciation of actinides are prerequisite for the development of technologies related to nuclear fuel cycles, especially, such as the safe management of high level radioactive wastes and the chemical examination of irradiated nuclear fuels. For supporting these technologies, laser-based spectroscopies have been performed for the chemical speciation of actinide in an aqueous solutions and the quantitative analysis of actinide isotopes in spent nuclear fuels. In this report, results on the following subjects have been summarized. (1) Development of TRLFS technology for chemical speciation of actinides, (2) Development of LIBD technology for measuring solubility of actinides, (3) Chemical speciation of plutonium complexes by using a LWCC system, (4) Development of LIBS technology for the quantitative analysis of actinides, (5) Development of technology for the chemical speciation of actinides by CE, (6) Evaluation on the chemical reactions between actinides and humic substances, (7) Chemical speciation of actinides adsorbed on metal oxides surfaces, (8) Determination of actinide source terms of spent nuclear fuel

  11. Adsorption of fission products on mediterranean mud; Adsorption des produits de fission sur des vases de mediterranee

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, P; Gailledreau, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Partition coefficients of some fission products have been measured in sea water on mud taken from the bottom of the Mediterranean sea. A discussion follows on the behaviour of these radioisotopes. (author) [French] On a mesure les coefficients de partage dans l'eau de mer de quelques produits de fission a longue periode sur des echantillons de vase preleves en Mediterranee. Les valeurs trouvees sont elevees. Le comportement de ces isotopes radioactifs est discutee. (auteur)

  12. ENDF/B-V actinides

    International Nuclear Information System (INIS)

    Kocherov, N.; Lemmel, H.D.

    1981-01-01

    This document summarizes the contents of the actinides part of the ENDF/B-V nuclear data library released by the US National Nuclear Data Center. This library or selective retrievals of it, are available from the IAEA Nuclear Data Section. (author)

  13. Environmental research on actinide elements

    Energy Technology Data Exchange (ETDEWEB)

    Pinder, J.E. III; Alberts, J.J.; McLeod, K.W.; Schreckhise, R.G. (eds.)

    1987-08-01

    The papers synthesize the results of research sponsored by DOE's Office of Health and Environmental Research on the behavior of transuranic and actinide elements in the environment. Separate abstracts have been prepared for the 21 individual papers. (ACR)

  14. Photochemical reactions of actinide ions

    International Nuclear Information System (INIS)

    Tomiyasu, Hiroshi

    1995-01-01

    This paper reviews the results of photochemical studies of actinide ions, which have been performed in our research group for past several years as follows: I) behavior of the excited uranyl(VI) ion; II) photo-reductions of the uranyl ion with organic and inorganic compounds; III) photo-oxidations of uranium(IV) and plutonium(III) in nitric acid solutions. (author)

  15. Angular overlap model in actinides

    International Nuclear Information System (INIS)

    Gajek, Z.; Mulak, J.

    1991-01-01

    Quantitative foundations of the Angular Overlap Model in actinides based on ab initio calculations of the crystal field effect in the uranium (III) (IV) and (V) ions in various crystals are presented. The calculations justify some common simplifications of the model and fix up the relations between the AOM parameters. Traps and limitations of the AOM phenomenology are discussed

  16. Angular overlap model in actinides

    Energy Technology Data Exchange (ETDEWEB)

    Gajek, Z.; Mulak, J. (Polska Akademia Nauk, Wroclaw (PL). Inst. Niskich Temperatur i Badan Strukturalnych)

    1991-01-01

    Quantitative foundations of the Angular Overlap Model in actinides based on ab initio calculations of the crystal field effect in the uranium (III) (IV) and (V) ions in various crystals are presented. The calculations justify some common simplifications of the model and fix up the relations between the AOM parameters. Traps and limitations of the AOM phenomenology are discussed.

  17. The oscillatory behavior of heated channels: an analysis of the density effect. Part I. The mechanism (non linear analysis). Part II. The oscillations thresholds (linearized analysis); Sur le comportement oscillatoire de canaux chauffes. - Etude theorique de l'effet de densite. 1ere partie: le mecanisme (analyse non lineaire), 2eme partie: seuils d'oscillation (analyse lineaire)

    Energy Technology Data Exchange (ETDEWEB)

    Boure, J [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Grenoble, 38 (France)

    1967-07-01

    The problem of the oscillatory behavior of heated channels is presented in terms of delay-times and a density effect model is proposed to explain the behavior. The density effect is the consequence of the physical relationship between enthalpy and density of the fluid. In the first part non-linear equations are derived from the model in a dimensionless form. A description of the mechanism of oscillations is given, based on the analysis of the equations. An inventory of the governing parameters is established. At this point of the study, some facts in agreement with the experiments can be pointed out. In the second part the start of the oscillatory behavior of heated channels is studied in terms of the density effect. The threshold equations are derived, after linearization of the equations obtained in Part I. They can be solved rigorously by numerical methods to yield: -1) a relation between the describing parameters at the onset of oscillations, and -2) the frequency of the oscillations. By comparing the results predicted by the model to the experimental behavior of actual systems, the density effect is very often shown to be the actual cause of oscillatory behaviors. (author) [French] Premiere partie: mecanisme (equations non linearisees). On expose le probleme du comportement oscillatoire des canaux chauffes en mettant l'accent sur la presence de retards dans le systeme et on propose un modele a 'effet de densite' pour expliquer ce comportement. L'effet de densite est la consequence de la relation physique entre l'enthalpie et la masse volumique du fluide. Les equations non lineaires du schema mathematique correspondant sont etablies et mises sous forme adimensionnelle. L'analyse de ces equations conduit a une description du mecanisme des oscillations. On donne la liste des parametres dont depend le comportement du modele. A ce stade de l'etude, on peut deja relever dans ce comportement plusieurs faits conformes a l'experience. Deuxieme partie: seuils d

  18. Chemical aspects of incinerating highly chlorinated and actinide {alpha} contaminated organic waste: application to the Iris process; Aspects chimiques de l'incineration des dechets organiques fortement charges en chlore et contamines en actinides emetteurs {alpha}. Application au procede IRIS

    Energy Technology Data Exchange (ETDEWEB)

    Lemort, F.; Cames, B. [CEA Valrho, (DCC/DRRV/SCD), 30 - Marcoule (France)

    2000-07-01

    A fraction of the waste produced by nuclear activities is combustible, and thus suitable for incineration to produce gases, ash and fines. A typical composition representative of actual organic waste mixtures was defined for the purpose of investigating possible heat treatment processes; the composition is identified according to components Table 1 and elements Table II. The high polyvinyl chloride (PVC) content is responsible for the high chlorine potential in the process equipment. The quantity and quality of the resulting solid residue depends entirely on the inorganic load of the organic waste, whose behavior is entirely conditioned by the process conditions. For example, pure polyethylene is totally converted to gases (water and carbon dioxide), while the composition shown in Table II produces a range of oxides and chlorides. The high chlorine content results in partial chlorination of the inorganic compounds, but can also lead to interactions with the process equipment. The temperature dependent variation of the chlorination equilibrium constants of various metals clearly shows that all the elements of technological alloys may be subject to active corrosion by hydrochloric acid. However, the corresponding oxides-notably alumina-are much less sensitive to corrosion; aluminum-based alloys are therefore preferred for incinerator construction and to limit corrosion by hydrochloric acid. Thermodynamic and kinetic studies led to the development of the IRIS three-step process. Gas emissions occurring during processing of solid materials are completely oxidized in the after-burning step at 1100 deg C, and are then ducted to a HERA filtration system capable of retaining all the actinide {alpha} radionuclides. Although corrosion-related problems are attenuated in the two-step process chlorine can combine with the inorganic waste material to form chlorides with potentially damaging effects on the system; this is the case for zinc chloride and for volatile chlorides in

  19. Behaviour of uranium under irradiation; Comportement de l'uranium sous irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Adda, Y; Mustelier, J P; Quere, Y [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    phase alloys (U Nb, U Mo) the size and distribution of the bubbles are greatly influenced by the existence of a polygonization lattice, formed before irradiation, inside the grains. During high temperature annealings the bubbles situated on the polygonization lattice grow much faster than those which are distributed inside the crystal. In the case of uranium the bubbles are either distributed at random, or grouped in flat accumulations which can give rise to transgranular cracks, according to the state of the metal and the irradiation temperature. At high temperature an intergranular de-cohesion is also observed. (authors) [French] On expose les principaux resultats obtenus dans l'etude de la formation des defauts introduits dans l'uranium par la fission a basse temperature. Par irradiation a 20 K on a pu evaluer le nombre de paires de Frenkel produites par une fission. L'analyse des courbes de variation de resistivite electrique a permis de preciser l'etendue des pointes de deplacement (deplacement Spike) et le mecanisme de la creation des defauts dus a la fission. Des irradiations a 77 K ont apporte des precisions supplementaires et indiquent un comportement different de l'uranium recristallise et ecroui. On a etudie la diffusion des gaz rares a partir d'alliages metal-gaz rare obtenus par decharge electrique et d'echantillons d'uranium irradie. Le degagement des gaz rares sous vide n'est controle par un processus de diffusion simple que dans le cas ou la teneur en gaz rare est tres faible (U tres faiblement irradie). Par contre quand la teneur en gaz rare est plus forte (echantillons prepares par decharge electrique) le degagement du gaz se produit par formation, croissance et coalescence de bulles; le coefficient de diffusion apparent est alors tres different du coefficient vrai et ne peut etre utilise dans les calculs de gonflement. Dans le cas d'un processus de diffusion simple on a etudie les differents facteurs qui regissent le phenomene. On a montre en

  20. Les facteurs de réussite des banques étrangéres sur le marché Algérien

    OpenAIRE

    Frifra, Amel

    2014-01-01

    Ce mémoire se développe en trois parties :la premiére partie reprends les fondements du marketing des services et les défis du marketing bancaire, la deuxiéme partie comprend les outils de réussite des banques étrangéres ( comportement du consommateur, la maitrise du management, comportement organisationnel), le troisiéme chapitre présente l'étude de marché SGA.

  1. Gestion des déchets dangereux et responsabilité sociale des firmes

    Directory of Open Access Journals (Sweden)

    Faouzi Bensebaa

    2010-10-01

    Full Text Available Prenant les déchets électriques et électroniques comme terrain d’observation, cette recherche étudie les fondements du commerce illégal de déchets dangereux des pays développés vers les PED. En effet, malgré la multiplication des législations, le problème des déchets dans les pays développés, loin d’être traité en amont, l’est en grande partie en aval par leur délocalisation dans les PED. Les deux lectures proposées, économique et institutionnelle, permettent de montrer comment les contraintes de coût de gestion des déchets dans les pays développés conjuguées à l’imperfection et à la non-application des législations conduisent à des comportements socialement irresponsables. À partir de là, l’implication des parties prenantes est suggérée comme solution pour éliminer ce type de comportements.Based on the analysis of the waste electrical and electronic equipments (WEEE, the research investigates the motivations for the illegal cross-border trade in hazardous wastes from developed countries to developing countries. Although many developed countries have implemented waste shipment regulations, they are passing the risks and costs of E-waste to developing countries. Indeed, E-waste is often sent for recycling and refurbishing in developing countries. The two-side proposed approach (i.e. economical and institutional suggests that both the cost for firms to comply with increasing regulations and the imperfect implementation of regulatory restrictions lead to socially irresponsible behaviours. An increasing and better involvement of stakeholders may be put forward as a solution.

  2. Recent development in computational actinide chemistry

    International Nuclear Information System (INIS)

    Li Jun

    2008-01-01

    Ever since the Manhattan project in World War II, actinide chemistry has been essential for nuclear science and technology. Yet scientists still seek the ability to interpret and predict chemical and physical properties of actinide compounds and materials using first-principle theory and computational modeling. Actinide compounds are challenging to computational chemistry because of their complicated electron correlation effects and relativistic effects, including spin-orbit coupling effects. There have been significant developments in theoretical studies on actinide compounds in the past several years. The theoretical capabilities coupled with new experimental characterization techniques now offer a powerful combination for unraveling the complexities of actinide chemistry. In this talk, we will provide an overview of our own research in this field, with particular emphasis on applications of relativistic density functional and ab initio quantum chemical methods to the geometries, electronic structures, spectroscopy and excited-state properties of small actinide molecules such as CUO and UO 2 and some large actinide compounds relevant to separation and environment science. The performance of various density functional approaches and wavefunction theory-based electron correlation methods will be compared. The results of computational modeling on the vibrational, electronic, and NMR spectra of actinide compounds will be briefly discussed as well [1-4]. We will show that progress in relativistic quantum chemistry, computer hardware and computational chemistry software has enabled computational actinide chemistry to emerge as a powerful and predictive tool for research in actinide chemistry. (authors)

  3. Etude numérique et expérimentale des distributions équipées de poussoirs hydrauliques. Influence et comportement de l'aération de l'huile Numerical and Experimental Study of Valvetrains Equipped with Hydraulic Lash Adjusters. Influence and Behaviour of Oil Aeration

    Directory of Open Access Journals (Sweden)

    Porot P.

    2006-11-01

    Full Text Available Un code numérique de simulation des distributions équipées de poussoirs hydrauliques a été développé. Le code est basé sur trois sous-modèles couplés : mécanique, hydraulique et physique. Le premier étudie la distribution comme un assemblage masses ressorts, le deuxième étudie le poussoir comme un organe hydraulique à part entière et le dernier permet d'étudier l'aération de l'huile et en particulier les phénomènes de dissolution. Une validation expérimentale a été menée sur un banc culasse alimenté par une huile mélangée à de l'air en proportions mesurées. L'instrumentation permettait de mesurer l'accélération de la tête de soupape, son déplacement au voisinage du siège et la force entre poussoir et soupape. Cette validation a montré que la simulation reflétait bien la réalité, notamment en ce qui concerne les effets de l'aération. A model of valvetrain equipped with a direct acting hydraulic lash adjuster (HLA is presented. As it is the cause of many problems, a possible aeration is taken into account. The main model is made of three submodels:1. The first one is a mechanical one with masses, springs and dampers and needs the cam laws and the pressure of the chamber of the HLA as data. 2. The second submodel is an hydraulic one. It studies the HLA chamber through the check valve flows, the leakage flow and the mechanical strains on the chamber oil. This submodel gives the chamber pressure to the first submodel. 3. The third submodel is a physical one and evaluates the instantaneous amount of air present in the chamber oil. It takes into account the arrival of new bubbles through the check valve and the mass exchanges (diffusion, dissolution between the bubbles and the oil bulk. This amount of air has a direct influence on the chamber pressure calculation made in the second submodel. Experimental validation of the model was conducted on an engine head. This engine head was feeded by an oil circuit in which

  4. Le harcèlement organisationnel des relations sous emprise

    CERN Document Server

    Guhel, Cécile

    2014-01-01

    Le lien entre harcèlement et emprise professionnelle est bien réel. Il est aussi puissant que destructeur. L'aide extérieure est importante mais la prise de conscience du sujet et sa mise à distance sont primordiales pour le retour à Soi. Un facteur de risque organisationnel est un facteur qui relève de l'organisation et qui comporte le risque ou la probabilité qu'un tel comportement abusif voie le jour et qu'il ait des effets négatifs. Un tel facteur peut également contribuer à la persistance ou à l'aggravation du comportement. En abordant la relation d'emprise sous l'éclairage de différentes théories psychologiques, cela vous permettra d'observer les mécanismes intrapsychiques conscients et inconscients qui sous-tendent les comportements de l'instigateur de la relation d'emprise d'une part, et de sa victime d'autre part. Enfin, à travers trois témoignages, de salariées en poste, vous découvrirez combien la parole sur le travail est importante dans la prise de conscience du processus de de...

  5. Différences de sexe et rôle de l'internalisation des règles sur la propension des enfants à prendre des risques à vélo

    OpenAIRE

    GRANIE, Marie-Axelle

    2011-01-01

    L'objectif de cette étude est d'explorer les différences de sexe et l'effet de l'internalisation des règles routières sur la propension des enfants à prendre des risques à vélo. La perception du risque accidentel pour soi, l'internalisation des règles routières relatives aux comportements cyclistes et la propension à prendre des risques à vélo de 145 enfants (86 garçons et 59 filles) de 9 à 12 ans ont été mesurés par un autoquestionnaire. Les résultats montrent des différences de sexe sur l'i...

  6. Actinide recovery techniques utilizing electromechanical processes

    International Nuclear Information System (INIS)

    Westphal, B.R.; Benedict, R.W.

    1994-01-01

    Under certain conditions, the separation of actinides using electromechanical techniques may be an effective means of residue processing. The separation of granular mixtures of actinides and other materials is based on appreciable differences in the magnetic and electrical properties of the actinide elements. In addition, the high density of actinides, particularly uranium and plutonium, may render a simultaneous separation based on mutually complementary parameters. Both high intensity magnetic separation and electrostatic separation have been investigated for the concentration of an actinide waste stream. Waste stream constituents include an actinide metal alloy and broken quartz shards. The investigation of these techniques is in support of the Integral Fast Reactor (IFR) concept currently being developed at Argonne National Laboratory under the auspices of the Department of Energy

  7. Actinide recovery techniques utilizing electromechanical processes

    International Nuclear Information System (INIS)

    Westphal, B.R.; Benedict, R.W.

    1994-01-01

    Under certain conditions, the separation of actinides using electromechanical techniques may be an effective means of residue processing. The separation of granular mixtures of actinides and other materials discussed in this report is based on appreciable differences in the magnetic and electrical properties of the actinide elements. In addition, the high density of actinides, particularly uranium and plutonium, may render a simultaneous separation based on mutually complementary parameters. Both high intensity magnetic separation and electrostatic separation have been investigated for the concentration of an actinide waste stream. Waste stream constituents include an actinide metal alloy and broken quartz shards. The investigation of these techniques is in support of the Integral Fast Reactor (IFR) concept currently being developed at Argonne National Laboratory under the auspices of the Department of Energy

  8. Analytical evaluation of actinide sensitivities

    International Nuclear Information System (INIS)

    Sola, A.

    1977-01-01

    The analytical evaluation of the sensitivities of actinides to various parameters such as cross sections, decay constants, flux and time is presented. The formulae are applied to isotopes of the Uranium, Neptunium, Plutonium and Americium series. The agreement between analytically obtained and computer evaluated sensitivities being always good, it is throught that the formulation includes all the important parameters entering in the evaluation of sensitivities. A study of the published data is made

  9. Study of the dynamic behaviour of the reactor Rapsodie; Etude du comportement dynamique de la pile rapsodie

    Energy Technology Data Exchange (ETDEWEB)

    Abdon, R; Chaigne, M [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1964-07-01

    . The investigation of the control, carried out on analog computer, served to determine the different possible means of starting and changing the conditions of the reactor as well as its automatic control. The calculations were examined in the totality by the construction of a training simulator composed of a board similar to the control board of the reactor, all of whose commands (reactivity and flows) work on an analogue computer which resolves in the real time the dynamic equations of the reactor and which reproduces simultaneously all the parameters representing the state of the installation (power, period, temperatures, etc. ) in the case of various incidents as well as under normal conditions of functioning. (authors) [French] On sait que le developpement des reacteurs surgenerateurs a neutrons rapides pose des problemes nouveaux d'une part dans les domaines mecanique et thermique et d'autre part en ce qui concerne leur comportement dynamique et leur surete. La pile RAPSODIE a ete l'objet de tres nombreuses etudes dynamiques effectuees sur machines analogiques et digitales, pour deux versions du combustible (metal et oxyde). Apres elaboration des modeles mathematiques representatifs de l'ensemble de l'installation (bloc pile et circuit de refroidissement) tant du point de vue neutronique que du point de vue thermodynamique, on a mis au point les schemas analogiques et les codes digitaux utilisables pour mener a bien les simulations d'incidents, de conduite et de stabilite du reacteur. On s'est attache, par rapport aux methodes habituelles a obtenir une precision plus grande, par un decoupage en zones plus fines, par l'emploi de formulations plus representatives du systeme reel, voire solubles analytiquement. Les etudes d'incidents ont ete effectuees par voie analogique pour l'ensemble de l'installation et par voie digitale pour l'etude du bloc pile seul ou de l'installation fonctionnant avec un seul circuit thermique. Un programme complementaire special - qui, a

  10. Carsim : un système pour convertir des textes en scènes tridimensionnelles animées

    NARCIS (Netherlands)

    Nugues, P.; Dupuy, S.; Egges, A.

    2004-01-01

    Cet article décrit un système de conversion de textes en scènes tridimensionnelles animées. Les textes sont des constats d’accidents de voitures rédigés par un des conducteurs. Le processus de conversion comporte de deux étapes. Un premier module d’extraction d’informations crée une description

  11. Research on the chemical speciation of actinides

    International Nuclear Information System (INIS)

    Jung, Euo Chang; Park, K. K.; Cho, H. R.

    2012-04-01

    A demand for the safe and effective management of spent nuclear fuel and radioactive waste generated from nuclear power plant draws increasing attention with the growth of nuclear power industry. The objective of this project is to establish the basis of research on the actinide chemistry by using highly sensitive and advanced laser-based spectroscopic systems. Researches on the chemical speciation of actinides are prerequisite for the development of technologies related to nuclear fuel cycles, especially, such as the safe management of high level radioactive wastes and the chemical examination of irradiated nuclear fuels. For supporting these technologies, laser-based spectroscopies have been applied for the chemical speciation of actinide in aqueous solutions and the quantitative analysis of actinide isotopes in spent nuclear fuels. In this report, results on the following subjects have been summarized. Development of TRLFS technology for the chemical speciation of actinides, Development of laser-induced photo-acoustic spectroscopy (LPAS) system, Application of LIBD technology to investigate dynamic behaviors of actinides dissolution reactions, Development of nanoparticle analysis technology in groundwater using LIBD, Chemical speciation of plutonium complexes by using a LWCC system, Development of LIBS technology for the quantitative analysis of actinides, Evaluation on the chemical reactions between actinides and humic substances, Spectroscopic speciation of uranium-ligand complexes in aqueous solution, Chemical speciation of actinides adsorbed on metal oxides surfaces

  12. Chemistry of actinides and fission products

    International Nuclear Information System (INIS)

    Pruett, D.J.; Sherrow, S.A.; Toth, L.M.

    1988-01-01

    This task is concerned primarily with the fundamental chemistry of the actinide and fission product elements. Special efforts are made to develop research programs in collaboration with researchers at universities and in industry who have need of national laboratory facilities. Specific areas currently under investigation include: (1) spectroscopy and photochemistry of actinides in low-temperature matrices; (2) small-angle scattering studies of hydrous actinide and fission product polymers in aqueous and nonaqueous solvents; (3) kinetic and thermodynamic studies of complexation reactions in aqueous and nonaqueous solutions; and (4) the development of inorganic ion exchange materials for actinide and lanthanide separations. Recent results from work in these areas are summarized here

  13. Recovery of trans-plutonium elements; Recuperation des elements transplutoniens

    Energy Technology Data Exchange (ETDEWEB)

    Espie, J Y; Poncet, B; Simon, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1970-07-01

    The object of this work is to study the recovery of americium and curium from the fission-product solution obtained from the processing of irradiated fuel elements made of natural metallic uranium alloyed with aluminium, iron and silicon; these elements have been subjected to an average irradiation of 4000 MW days/ton in a gas-graphite type reactor having a thermal power of 3.7 MW/ton of uranium. The process used consists of 3 extraction cycles and one americium-curium separation: - 1) extraction cycle in 40 per cent TBP: extraction of actinides and lanthanides; elimination of fission products; - 2) extraction cycle in 8 per cent D2EHPA: decontamination from the fission products, decontamination of actinides from lanthanides; - 3) extraction cycle in 40 per cent TBP: separation of the complexing agent and concentration of the actinides; - 4) americium-curium separation by precipitation. (authors) [French] Cette etude a pour objet, la recuperation de l'americium et du curium de la solution de produits de fission provenant du traitement de combustibles irradies a base d'uranium naturel metallique allie a l'aluminium, le fer, et le silicium, et ayant subi une irradiation moyenne de 4000 MWj/t dans une pile du type graphite-gaz, dont la puissance thermique est de 3.7 MW/t d'uranium. Le procede utilise comprend 3 cycles d'extraction et une separation americium-curium: - 1. cycle d'extraction dans le TBP a 40 pour cent: extraction des actinides et des lanthanides, elimination des produits de fission; - 2. cycle d'extraction dans le D2EHPA a 8 pour cent: decontamination en produits de fission, decontamination des actinides en lanthanides; - 3. cycle d'extraction dans le TBP a 40 pour cent: separation du complexant et concentration des actinides; - 4. separation americium-curium par precipitation. (auteurs)

  14. Réutilisation d'argiles très plastiques (A4) en remblai : Suivi du comportement après trois ans de réalisation

    OpenAIRE

    BERCHE, Véronique; ROBERT, Nicolas; BOUSSAFIR, Yasmina; FERBER, Valéry

    2013-01-01

    Cet article présente la réalisation de remblais en argile très plastiques en 2003 sur l'A34 dans les Ardennes (France) ainsi que les résultats du suivi du comportement de ces remblais dans le temps. Après un bref rappel des conditions de réalisation de ces remblais, un résumé des résultats de portance et de densité à court et moyen terme sera exposé. Dans un deuxième temps, des résultats de densité (double sonde Gamma et passage au banc Gamma) et essais Dynaplaque réalisés en 2006 seront c...

  15. Analysis of working conditions and comportment of prevention in radiation protection

    International Nuclear Information System (INIS)

    Bouhnik, C.

    1992-01-01

    In this article, the author presents analysis methods of working conditions( environment of working stations, working stress, socio-technical environment, ability and, emotion and relation phenomena) that permit to understand how the prevention comportment is regulated

  16. Les clients des services d'escorte tels que perçus par des femmes offrant ces services

    Directory of Open Access Journals (Sweden)

    Jacqueline

    2015-07-01

    Full Text Available La discussion de projets de loi criminalisant l'achat des services sexuels constitue un sujet brûlant d'actualité dans plusieurs pays, dont le Canada. Pourtant, bon nombre d'études indiquent que la plupart des clients agissent de manière civilisée envers la personne travailleuse du sexe, alors que seule une infime minorité de clients présentent des comportements violents. Interviewant 16 femmes offrant des services d'escorte, quant à leur expérience de sexualité dans le cadre du travail, celles-ci ont beaucoup discuté des besoins qu'elles percevaient chez leurs clients, de même que des attitudes de ces derniers envers elles. Les participantes décrivent ceux-ci comme étant le plus souvent respectueux, la plupart recherchant un contact chaleureux avec elle et agissant en conséquence. En outre, ceux des clients qui ne recherchent qu'une expérience sexuelle tendent à être également respectueux envers l'escorte. Par contre, certains clients présentent une attitude ou un comportement désagréable. Quelques participantes ont également eu affaire à un client violent au cours de leur parcours comme escorte. La plupart des participantes étaient en mesure de choisir leurs clients, ce qui leur a permis de surtout rencontrer des clients aimables et qui, à l'occasion, leur procure également du plaisir sexuel. Par contre, les participantes plus vulnérables et moins capables de choisir et de maintenir leurs limites ont rencontré plus de clients désagréables ou agressifs.

  17. Risk-Based Tailoring of the Verification, Validation, and Accreditation/Acceptance Processes (Adaptation fondee sur le risque, des processus de verification, de validation, et d’accreditation/d’acceptation)

    Science.gov (United States)

    2012-04-01

    AGARD doivent comporter la dénomination « RTO » ou « AGARD » selon le cas, suivi du numéro de série. Des informations analogues, telles que le titre ...MSG-054 Risk-Based Tailoring of the Verification, Validation, and Accreditation/ Acceptance Processes (Adaptation fondée sur le risque, des...MSG-054 Risk-Based Tailoring of the Verification, Validation, and Accreditation/ Acceptance Processes (Adaptation fondée sur le risque, des

  18. Study of the behaviour of artificial radioactive aerosols. Applications to some problems of atmospheric circulation (1963); Etude du comportement dcs aerosols radioactifs artificiels. Applications a quelques problemes de circulation atmospherique (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Lambert, G. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-11-15

    The aim of this work, consists in the examination of the behaviour of radioactive aerosols produced in the atmosphere by nuclear explosions, in order to deduce the most general laws governing atmospheric circulation and diffusion. After having given a general table of the radioactive aerosols present the authors consider the validity and the precision of the measurement methods and the concentration of the aerosols at ground level and in the upper atmosphere, as well as their deposition on the ground. The existence is thus demonstrated of a tropospheric equatorial barrier and of discontinuous and seasonal aspects of stratosphere-troposphere transfers. The role is shown of precipitations and dry auto-filtration in the lower atmosphere cleaning processes. This work makes it possible to describe the general behaviour of dust from the stratosphere, and to improve the total radioactive contamination of the globe. (author) [French] L'objectif de ce travail consiste a examiner le comportement des aerosols radioactifs introduits dans l'atmosphere par les explosions nucleaires, pour en deduire les lois les plus generals de la circulation et diffusion atmospheriques. Apres avoir dresse un tableau d'ensemble des aerosols radioactifs presents, on examine la validite et la precision des methodes de mesure de leur concentration, au niveau du sol et en haute atmosphere, ainsi que de leur depot a la surface du sol. On met ainsi en evidence l'existence d'une barriere equatoriale tropospherique; l'aspect discontinu et saisonnier des transferts stratosphere-troposphere; le role des precipitations et de l'auto-filtration seche, dans les processus de nettoyage de la basse atmosphere. Ces etudes permettent de decrire le comportement general des poussieres d'origine stratospherique et d'ameliorer le bilan de la contamination radioactive du globe. (auteur)

  19. Study of the behaviour of artificial radioactive aerosols. Applications to some problems of atmospheric circulation (1963); Etude du comportement dcs aerosols radioactifs artificiels. Applications a quelques problemes de circulation atmospherique (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Lambert, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-11-15

    The aim of this work, consists in the examination of the behaviour of radioactive aerosols produced in the atmosphere by nuclear explosions, in order to deduce the most general laws governing atmospheric circulation and diffusion. After having given a general table of the radioactive aerosols present the authors consider the validity and the precision of the measurement methods and the concentration of the aerosols at ground level and in the upper atmosphere, as well as their deposition on the ground. The existence is thus demonstrated of a tropospheric equatorial barrier and of discontinuous and seasonal aspects of stratosphere-troposphere transfers. The role is shown of precipitations and dry auto-filtration in the lower atmosphere cleaning processes. This work makes it possible to describe the general behaviour of dust from the stratosphere, and to improve the total radioactive contamination of the globe. (author) [French] L'objectif de ce travail consiste a examiner le comportement des aerosols radioactifs introduits dans l'atmosphere par les explosions nucleaires, pour en deduire les lois les plus generals de la circulation et diffusion atmospheriques. Apres avoir dresse un tableau d'ensemble des aerosols radioactifs presents, on examine la validite et la precision des methodes de mesure de leur concentration, au niveau du sol et en haute atmosphere, ainsi que de leur depot a la surface du sol. On met ainsi en evidence l'existence d'une barriere equatoriale tropospherique; l'aspect discontinu et saisonnier des transferts stratosphere-troposphere; le role des precipitations et de l'auto-filtration seche, dans les processus de nettoyage de la basse atmosphere. Ces etudes permettent de decrire le comportement general des poussieres d'origine stratospherique et d'ameliorer le bilan de la contamination radioactive du globe. (auteur)

  20. Study of learning capabilities of tropical clupeoïdes using artificial stimulus

    OpenAIRE

    Soria, Marc

    1990-01-01

    Nous avons étudié dans des conditions expérimentales l'apprentissage et le conditionnement de petits poissons pélagiques à un stress. Les poissons peuvent être conditionnés et peuvent après conditionnement, entraîner des réactions dans un banc de poissons naïfs. Nous discutons ensuite de l'influence possible des comportements observés sur la capturabilité. (Résumé d'auteur)

  1. Progettazione dello spazio urbano e comportamenti criminosi / Planification de l’espace urbain et comportements criminels / Urban space planning and crime

    Directory of Open Access Journals (Sweden)

    Sicurella Sandra

    2012-04-01

    Full Text Available Crime is a common phenomenon in urban spaces. There is a relationship between crime, urban environment and the perception of security. For this reason, it is important to plan safe public spaces from an architectural point of view because it may help to reduce number of crimes and citizens’ feelings of insecurity. It is thus necessary to study the problem of urban crime from different perspectives: in this sense, architecture, town planning, law, sociology and criminology may help actively to solve the problems connected to crime in our cities.L’espace urbain est l’un des principaux lieux des phénomènes criminels. C’est en effet dans les villes que se développent des phénomènes indicatifs de la genèse, de l’explication des comportements criminels et du contrôle social. Dans la relation entre criminalité, environnement physique et perception de la sécurité, une importance considérable est accordée à la planification des espaces urbains car une organisation soignée du point de vue architectural et urbanistique peut affecter positivement l’atténuation du sentiment de vulnérabilité et contribuer à la réduction de la criminalité. Afin de limiter les possibilités de commission des crimes et de réduire le sentiment d’insécurité ressenti par les citoyens, il est donc nécessaire d’utiliser une approche multidisciplinaire pour aborder les problématiques de nos villes : architectes, urbanistes, juristes, sociologues et criminologues peuvent, tous ensemble, devenir les acteurs de la concertation urbaine pour intervenir efficacement dans nos villes.

  2. Analysis of large soil samples for actinides

    Science.gov (United States)

    Maxwell, III; Sherrod, L [Aiken, SC

    2009-03-24

    A method of analyzing relatively large soil samples for actinides by employing a separation process that includes cerium fluoride precipitation for removing the soil matrix and precipitates plutonium, americium, and curium with cerium and hydrofluoric acid followed by separating these actinides using chromatography cartridges.

  3. Burn of actinides in MOX fuel cells

    International Nuclear Information System (INIS)

    Martinez C, E.; Ramirez S, J. R.; Alonso V, G.

    2017-09-01

    The spent fuel from nuclear reactors is stored temporarily in dry repositories in many countries of the world. However, the main problem of spent fuel, which is its high radio-toxicity in the long term, is not solved. A new strategy is required to close the nuclear fuel cycle and for the sustain ability of nuclear power generation, this strategy could be the recycling of plutonium to obtain more energy and recycle the actinides generated during the irradiation of the fuel to transmute them in less radioactive radionuclides. In this work we evaluate the quantities of actinides generated in different fuels and the quantities of actinides that are generated after their recycling in a thermal reactor. First, we make a reference calculation with a regular enriched uranium fuel, and then is changed to a MOX fuel, varying the plutonium concentrations and determining the quantities of actinides generated. Finally, different amounts of actinides are introduced into a new fuel and the amount of actinides generated at the end of the fuel burn is calculated, in order to determine the reduction of minor actinides obtained. The results show that if the concentration of plutonium in the fuel is high, then the production of minor actinides is also high. The calculations were made using the cell code CASMO-4 and the results obtained are shown in section 6 of this work. (Author)

  4. Environmental chemistry of the actinide elements

    International Nuclear Information System (INIS)

    Rao Linfeng

    1986-01-01

    The environmental chemistry of the actinide elements is a new branch of science developing with the application of nuclear energy on a larger and larger scale. Various aspects of the environmental chemistry of the actinide elements are briefly reviewed in this paper, such as its significance in the nuclear waste disposal, its coverage of research fields and possible directions for future study

  5. Calculated Atomic Volumes of the Actinide Metals

    DEFF Research Database (Denmark)

    Skriver, H.; Andersen, O. K.; Johansson, B.

    1979-01-01

    The equilibrium atomic volume is calculated for the actinide metals. It is possible to account for the localization of the 5f electrons taking place in americium.......The equilibrium atomic volume is calculated for the actinide metals. It is possible to account for the localization of the 5f electrons taking place in americium....

  6. Minor Actinides Recycling in PWRs

    International Nuclear Information System (INIS)

    Delpech, M.; Golfier, H.; Vasile, A.; Varaine, F.; Boucher, L.; Greneche, D.

    2006-01-01

    Recycling of minor actinides in current and near future PWR is considered as one of the options of the general waste management strategy. This paper presents the analysis of this option both from the core physics and fuel cycle point of view. A first indicator of the efficiency of different neutron spectra for transmutation purposes is the capture to fission cross sections ratio which is less favourable by a factor between 5 to 10 in PWRs compared to fast reactors. Another indicator presented is the production of high ranking isotopes like Curium, Berkelium or Californium in the thermal or epithermal spectrum conditions of PWR cores by successive neutron captures. The impact of the accumulation of this elements on the fabrication process of such PWR fuels strongly penalizes this option. The main constraint on minor actinides loadings in PWR (or fast reactors) fuels are related to their direct impact (or the impact of their transmutation products) on the reactivity coefficients, the reactivity control means and the core kinetics parameters. The main fuel cycle physical parameters like the neutron source, the alpha decay power, the gamma and neutrons dose rate and the criticality aspects are also affected. Recent neutronic calculations based on a reference core of the Evolutionary Pressurized Reactor (EPR), indicates typical maximum values of 1 % loadings. Different fuel design options for minor actinides transmutation purposes in PWRs are presented: UOX and MOX, homogeneous and heterogeneous assemblies. In this later case, Americium loading is concentrated in specific pins of a standard UOX assembly. Recycling of Neptunium in UOX and MOX fuels was also studied to improve the proliferation resistance of the fuel. The impact on the core physics and penalties on Uranium enrichment were underlined in this case. (authors)

  7. PIE analysis for minor actinide

    International Nuclear Information System (INIS)

    Suyama, Kenya

    2005-01-01

    Minor actinide (MA) is generated in nuclear fuel during the operation of power reactor. For fuel design, reactivity decrease due to it should be considered. Out of reactors, MA plays key role to define the property of spent fuel (SF) such as α-radioactivity, neutron emission rate, and criticality of SF. In order to evaluate the calculation codes and libraries for predicting the amount of MA, comparison between calculation results and experimentally obtained data has been conducted. In this report, we will present the status of PIE data of MA taken by post irradiation examinations (PIE) and several calculation results. (author)

  8. Review of actinide decorporation with chelating agents

    Energy Technology Data Exchange (ETDEWEB)

    Ansoborlo, E. [CEA Valrho, Dir. de l' Energie Nucleaire (DEN/DRCP/CETAMA), 30 - Marcoule (France); Amekraz, B.; Moulin, Ch. [CEA Saclay, Dept. de Physico-Chimie (DEN/DPC/SECR), 91 - Gif sur Yvette (France); Moulin, V. [CEA Saclay, Dir. du Developpement et de l' Innovation Nucleares (DEN/DDIN/MR), 91 - Gif Sur Yvette (France); Taran, F. [CEA Saclay (DSV/DBJC/SMMCB), 91 - Gif-sur-Yvette (France); Bailly, Th.; Burgada, R. [Centre National de la Recherche Scientifique (CNRS/LCSB/UMR 7033), 93 - Bobigny (France); Henge-Napoli, M.H. [CEA Valrho, Site de Marcoule (INSTN), 30 (France); Jeanson, A.; Den Auwer, Ch.; Bonin, L.; Moisy, Ph. [CEA Valrho, Dir. de l' Energie Nucleaire (DEN/DRCP/SCPS), 30 - Marcoule (France)

    2007-10-15

    In case of accidental release of radionuclides in a nuclear facility or in the environment, internal contamination (inhalation, ingestion or wound) with actinides represents a severe health risk to human beings. It is therefore important to provide effective chelation therapy or decorporation to reduce acute radiation damage, chemical toxicity, and late radiation effects. Speciation governs bioavailability and toxicity of elements and it is a prerequisite tool for the design and success of new ligands or chelating agents. The purpose of this review is to present the state-of-the-art of actinide decorporation within biological media, to recall briefly actinide metabolism, to list the basic constraints of actinide-ligand for development, to describe main tools developed and used for decorporation studies, to review mainly the chelating agents tested for actinides, and finally to conclude on the future trends in this field. (authors)

  9. Catalytic Organic Transformations Mediated by Actinide Complexes

    Directory of Open Access Journals (Sweden)

    Isabell S. R. Karmel

    2015-10-01

    Full Text Available This review article presents the development of organoactinides and actinide coordination complexes as catalysts for homogeneous organic transformations. This chapter introduces the basic principles of actinide catalysis and deals with the historic development of actinide complexes in catalytic processes. The application of organoactinides in homogeneous catalysis is exemplified in the hydroelementation reactions, such as the hydroamination, hydrosilylation, hydroalkoxylation and hydrothiolation of alkynes. Additionally, the use of actinide coordination complexes for the catalytic polymerization of α-olefins and the ring opening polymerization of cyclic esters is presented. The last part of this review article highlights novel catalytic transformations mediated by actinide compounds and gives an outlook to the further potential of this field.

  10. Study of the electrical behavior of various magnetohydrodynamic generators using explosives; Etude du comportement electrique de differents generateurs magnetohydrodynamiques a explosif

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, J; Jouys, J [Commissariat a l' Energie Atomique, Limeil-Brevannes (France). Centre d' Etudes

    1969-07-01

    This report studies the electric behaviour of several types of pulse generators which use the M. H.D. conversion of explosives chemical energy to supply experiments of plasma physics. We study and compare their electric parameters and behaviour on ohmic and inductive loads. The electrical energy which appears on the load is studied in respect of the load and generator characteristics. We point out the way to amplify the initial electric energy. (author) [French] On definit dans ce rapport les principaux types de generateurs electriques utilisant la conversion magnetohydrodynamique de l'energie chimique de l'explosif et leurs differents modes de fonctionnement. On etudie et on compare leurs comportements electriques lorsqu'ils debitent sur un circuit selfique et resistif. On analyse l'influence des parametres electriques sur l'energie recuperee par la charge d'utilisation et on precise les conditions permettant d'obtenir une amplification de l'energie electrique initiale du systeme. (auteur)

  11. Les oiseaux piscivores comme indicateurs de la qualité de l'environnement marin: suivi des effets de la plche littorale en Afrique du Nord-Ouest

    NARCIS (Netherlands)

    Veen, J.; Peeters, J.; Leopold, M.F.; Damme, van C.J.G.; Veen, T.

    2003-01-01

    Les recherches rapportées ici avaient pour objectif d'établir un systOme de suivi permettant de mesurer les effets futurs de la plche devant la côte ouest-africaine. Les recherches concernaient le comportement dans les sites de reproduction et la nourriture des oiseaux de mer pour avoir une idée de

  12. 1 Influence des paramètres de composition sur le comportement du ...

    African Journals Online (AJOL)

    AKA BOKO

    N. BOUHAMOU et al. 2 some arrangement parameters upon the self-compacting concrete at it's fresh state. ... Keywords : Self-compacting concrete, superplasticizer, limestone powder, local materials, fresh concrete ...... [10] - S. Utsi, M. Emborg, J. Carsward “Relation between workability and theological parameters”, Therd ...

  13. Comportement et fragmentation dynamique des matériaux quasi-fragiles

    OpenAIRE

    Rouabhi , Ahmed

    2004-01-01

    This thesis seeks to find a computational methodology to simulate both the behaviour and the fragmentation of quasi-brittle materials, such as rocks and concrete, under dynamic loading. Such a methodology will help to a better understanding of the explosive rock breakage mechanisms and, as consequence, will contribute in the optimization of blasting performances. In this study, we consider that the fragmentation process is a natural extension of the fracture process. In order to describe the ...

  14. Human Behaviour Representation in Constructive Modelling (Representation du comportement humain dans des modelisations creatives)

    Science.gov (United States)

    2009-09-01

    Resources and Performance. Action Group 19. Representation of Human Behavior. Lanchester , F. W. (1916). Aircraft in warfare . The dawn of the fourth...Operations and non-kinetic warfare . The second keynote presentation, by Mr. Mike Greenley, CAE Inc. provided an industry perspective, noting the need for...concentrated on tactical-conventional warfare and the emergence of world-wide “irregular warfare ” and “small wars” drive the present and future need

  15. Resetting dynamic behaviour of pipework systems; Recalage du comportement dynamique des reseaux de tuyauteries

    Energy Technology Data Exchange (ETDEWEB)

    Gaudin, M [Electricite de France (EDF), Direction des Etudes et Recherches, 92 - Clamart (France)

    1998-12-31

    Resetting models is applied to electricity generating plant pipework systems. A frequency approach to the problem is made in an original way thanks to the use of precise dynamic rigidity matrices. The method assumes two kinds of unknown: the usually processed mechanical characteristics (Young`s Modulus, density etc.) and new resetting parameters acting on the dynamic behaviour of unknown connections. As the latter have a very wide range of possible variation, they benefit from a change of variable which allows the assumptions formulated to be complied with. The minimized cost function is based on a error in load. The frequencies required for building it are automatically selected thanks to different tests on measurements. Minimization uses a sensitivity technique linked with a method of least standard squares. The method has been programmed in Fortran 90 within the CIRCUS code and tried out on various examples which were simulated and sound effects cases as well as an actual case. (author). 128 refs.

  16. Resetting dynamic behaviour of pipework systems; Recalage du comportement dynamique des reseaux de tuyauteries

    Energy Technology Data Exchange (ETDEWEB)

    Gaudin, M. [Electricite de France (EDF), Direction des Etudes et Recherches, 92 - Clamart (France)

    1997-12-31

    Resetting models is applied to electricity generating plant pipework systems. A frequency approach to the problem is made in an original way thanks to the use of precise dynamic rigidity matrices. The method assumes two kinds of unknown: the usually processed mechanical characteristics (Young`s Modulus, density etc.) and new resetting parameters acting on the dynamic behaviour of unknown connections. As the latter have a very wide range of possible variation, they benefit from a change of variable which allows the assumptions formulated to be complied with. The minimized cost function is based on a error in load. The frequencies required for building it are automatically selected thanks to different tests on measurements. Minimization uses a sensitivity technique linked with a method of least standard squares. The method has been programmed in Fortran 90 within the CIRCUS code and tried out on various examples which were simulated and sound effects cases as well as an actual case. (author). 128 refs.

  17. Transient behaviour of deep underground salt caverns; Comportement transitoire des cavites salines profondes

    Energy Technology Data Exchange (ETDEWEB)

    Karimi-Jafari, M

    2007-11-15

    This work deals with the transient behaviour of deep underground salt caverns. It has been shown that a cavern is a complex system, in which there are mechanical, thermal, chemical and hydraulic evolutions. The importance of the transient evolutions, particularly the role of the 'reverse' creep in the interpretation of the tightness test in a salt cavern is revealed. Creep is characterized by a formulation of the behaviour law which presents the advantage, in a practical point of view, to only have a reduced number of parameters while accounting of the essential of what it is observed. The initiation of the rupture in the effective traction in a salt cavern rapidly pressurized is discussed. A model fitted to a very long term behaviour (after abandonment) is developed too. In this case too, a lot of phenomena, more or less coupled, occur, when the existing literature took only into account some phenomena. (O.M.)

  18. Minor actinide transmutation - a waste management option

    International Nuclear Information System (INIS)

    Koch, L.

    1986-01-01

    The incentive to recycle minor actinides results from the reduction of the long-term α-radiological risk rather than from a better utilization of the uranium resources. Nevertheless, the gain in generated electricity by minor actinide transmutation in a fast breeder reactor can compensate for the costs of their recovery and make-up into fuel elements. Different recycling options of minor actinides are discussed: transmutation in liquid metal fast breeder reactors (LMFBRs) is possible as long as plutonium is not recycled in light water reactors (LWRs). In this case a minor actinide burner with fuel of different composition has to be introduced. The development of appropriate minor actinide fuels and their properties are described. The irradiation experiments underway or planned are summarized. A review of minor actinide partitioning from the PUREX waste stream is given. From the present constraints of LMFBR technology a reduction of the long-term α-radiological risk by a factor of 200 is deduced relative to that from the direct storage of spent LWR fuel. Though the present accumulation of minor actinides is low, nuclear transmutation may be needed when nuclear energy production has grown. (orig.)

  19. Criteria for achieving actinide reduction goals

    International Nuclear Information System (INIS)

    Liljenzin, J.O.

    1996-01-01

    In order to discuss various criteria for achieving actinide reduction goals, the goals for actinide reduction must be defined themselves. In this context the term actinides is interpreted to mean plutonium and the so called ''minor actinides'' neptunium, americium and curium, but also protactinium. Some possible goals and the reasons behind these will be presented. On the basis of the suggested goals it is possible to analyze various types of devices for production of nuclear energy from uranium or thorium, such as thermal or fast reactors and accelerator driven system, with their associated fuel cycles with regard to their ability to reach the actinide reduction goals. The relation between necessary single cycle burn-up values, fuel cycle processing losses and losses to waste will be defined and discussed. Finally, an attempt is made to arrange the possible systems on order of performance with regard to their potential to reduce the actinide inventory and the actinide losses to wastes. (author). 3 refs, 3 figs, 2 tabs

  20. Actinides burnup in a sodium fast reactor

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez S, J. R.; Pineda A, R.; Martinez C, E.; Alonso, G., E-mail: ramon.ramirez@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2017-09-15

    The burnup of actinides in a nuclear reactor is been proposed as part of an advanced nuclear fuel cycle, this process would close the fuel cycle recycling some of the radioactive material produced in the open nuclear fuel cycle. These actinides are found in the spent nuclear fuel from nuclear power reactors at the end of their burnup in the reactor. Previous studies of actinides recycling in thermal reactors show that would be possible reduce the amounts of actinides at least in 50% of the recycled amounts. in this work, the amounts of actinides that can be burned in a fast reactor is calculated, very interesting results surge from the calculations, first, the amounts of actinides generated by the fuel is higher than for thermal fuel and the composition of the actinides vector is different as in fuel for thermal reactor the main isotope is the {sup 237}Np in the fuel for fast reactor the main isotope is the {sup 241}Am, finally it is concluded that the fast reactor, also generates important amounts of waste. (Author)

  1. Le Pétrole et les dispersants dans les mers baignant le littoral canadien: évaluation des recherches et recommandations

    National Research Council Canada - National Science Library

    Sprague, John B; Vandermeulen, J. H; Wells, P. G; Birchard, E. C

    1982-01-01

    ...; les methodes d'analyse; les effets du petrole, des dispersants et du petrole disperse chimiquement sur le phytoplancton, les macrophytes, le zooplancton, les poissons, les organismes et animaux benthiques et intertidaux, les oiseaux, les mammiferes marins, les communautes et les ecosystemes. Il comporte certaines recommandations en vue de recherches futures indispensables et donne des conseils sur la facon de minimiser les effets de deversements de petrole dans le milieu marin canadien.

  2. Experimental studies of actinides in molten salts

    International Nuclear Information System (INIS)

    Reavis, J.G.

    1985-06-01

    This review stresses techniques used in studies of molten salts containing multigram amounts of actinides exhibiting intense alpha activity but little or no penetrating gamma radiation. The preponderance of studies have used halides because oxygen-containing actinide compounds (other than oxides) are generally unstable at high temperatures. Topics discussed here include special enclosures, materials problems, preparation and purification of actinide elements and compounds, and measurements of various properties of the molten volts. Property measurements discussed are phase relationships, vapor pressure, density, viscosity, absorption spectra, electromotive force, and conductance. 188 refs., 17 figs., 6 tabs

  3. Experimental studies of actinides in molten salts

    Energy Technology Data Exchange (ETDEWEB)

    Reavis, J.G.

    1985-06-01

    This review stresses techniques used in studies of molten salts containing multigram amounts of actinides exhibiting intense alpha activity but little or no penetrating gamma radiation. The preponderance of studies have used halides because oxygen-containing actinide compounds (other than oxides) are generally unstable at high temperatures. Topics discussed here include special enclosures, materials problems, preparation and purification of actinide elements and compounds, and measurements of various properties of the molten volts. Property measurements discussed are phase relationships, vapor pressure, density, viscosity, absorption spectra, electromotive force, and conductance. 188 refs., 17 figs., 6 tabs.

  4. Neutron nuclear data evaluation for actinide nucleic

    International Nuclear Information System (INIS)

    Chen Guochang; Yu Baosheng; Duan Junfeng; Ge Zhigang; Cao Wentian; Tang Guoyou; Shi Zhaomin; Zou Yubin

    2010-01-01

    The nuclear data with high accuracy for minor actinides are playing an important role in nuclear technology applications, including reactor design and operation, fuel cycle concepts, estimation of the amount of minor actinides in high burn-up reactors and the minor actinides transmutation. Through describe the class of nuclear data and nuclear date library, and introduce the procedure of neutron nuclear data evaluation. 234 U(n, f) and 237 Np(n, 2n) reaction experimental data evaluation was evaluated. The fission nuclear data are updated and improved. (authors)

  5. Actinide chemistry in the far field

    International Nuclear Information System (INIS)

    Livens, F.R.; Morris, K.; Parkman, R.; Moyes, L.

    1996-01-01

    The environmental chemistry of the actinides is complicated due both to the extensive redox and coordination chemistry of the elements and also to the complexity of the reactive phases encountered in natural environments. In the far field, interactions with reactive surfaces, coatings and colloidal particles will play a crucial role in controlling actinide mobility. By virtue of both their abundance and reactivity; clays and other layer aluminosilicate minerals, hydrous oxides and organic matter (humic substances) are all identified as having the potential to react with actinide ions and some possible modes of interaction are described, together with experimental evidence for their occurrence. (author)

  6. Spin and orbital moments in actinide compounds

    DEFF Research Database (Denmark)

    Lebech, B.; Wulff, M.; Lander, G.H.

    1991-01-01

    The extended spatial distribution of both the transition-metal 3d electrons and the actinide 5f electrons results in a strong interaction between these electron states when the relevant elements are alloyed. A particular interesting feature of this hybridization, which is predicted by single...... experiments designed to determine the magnetic moments at the actinide and transition-metal sublattice sites in compounds such as UFe2, NpCo2, and PuFe2 and to separate the spin and orbital components at the actinide sites. The results show, indeed, that the ratio of the orbital to spin moment is reduced...

  7. COMPORTEMENT D’UN COMPOSITE FINE MINERALE - CIMENT - BOIS ELABORE A L’AIDE DE DECHETS INDUSTRIELS SOLIDES

    Directory of Open Access Journals (Sweden)

    M.L BENMALEK

    2000-06-01

    Full Text Available Cinq fines minérales de différentes natures minéralogiques et de limites granulaires comparables, provenant de résidus de carrières, ont été traitées pour former le squelette de bétons légers d'isolation. L'allégement et le pouvoir isolant de ces bétons sont obtenus par incorporation de granulats de bois dans la matrice constituée de la fine minérale et de ciment CPA. Dans une première partie, sont présentés les principales caractéristiques de ces fines: minéralogie par diffraction des rayons X, granulométrie laser, conductivité thermique à la sonde TPS, densité sèche par  pycnomètrie à eau et morphologie au MEB. La seconde partie est consacrée à l'étude de l'effet des caractéristiques de ces fines sur le comportement hygrothermique et mécanique de ces bétons élaborés avec une même formulation et un même état de consistance au moulage. Les résultats de ces investigations sont comparés entre eux et  à ceux de matériaux usuels classés par la RILEM.

  8. Elaboration de nouvelles approches micromecaniques pour l'optimisation des performances mecaniques des materiaux heterogenes

    Science.gov (United States)

    Aboutajeddine, Ahmed

    donner de bons resultats. Finalement, ce modele de Mori-Tanaka corrige est utilise avec les operateurs de Hill pour construire un modele de transition d'echelle pour les materiaux ayant une interphase elastoplastique. La loi de comportement effective trouvee est de nature incrementale et elle est conjuguee a la relation de la plasticite de l'interphase. Des simulations d'essais mecaniques pour plusieurs proprietes de l'interphase plastique a permis de dresser des profils de l'enrobage octroyant un meilleur comportement au materiau.

  9. Actinide recovery from pyrochemical residues

    International Nuclear Information System (INIS)

    Avens, L.R.; Clifton, D.G.; Vigil, A.R.

    1984-01-01

    A new process for recovery of plutonium and americium from pyrochemical waste has been demonstrated. It is based on chloride solution anion exchange at low acidity, which eliminates corrosive HCl fumes. Developmental experiments of the process flowsheet concentrated on molten salt extraction (MSE) residues and gave >95% plutonium and >90% americium recovery. The recovered plutonium contained 6 = from high chloride-low acid solution. Americium and other metals are washed from the ion exchange column with 1N HNO 3 -4.8M NaCl. The plutonium is recovered, after elution, via hydroxide precipitation, while the americium is recovered via NaHCO 3 precipitation. All filtrates from the process are discardable as low-level contaminated waste. Production-scale experiments are now in progress for MSE residues. Flow sheets for actinide recovery from electrorefining and direct oxide reduction residues are presented and discussed

  10. Actinide recovery from pyrochemical residues

    International Nuclear Information System (INIS)

    Avens, L.R.; Clifton, D.G.; Vigil, A.R.

    1985-05-01

    We demonstrated a new process for recovering plutonium and americium from pyrochemical waste. The method is based on chloride solution anion exchange at low acidity, or acidity that eliminates corrosive HCl fumes. Developmental experiments of the process flow chart concentrated on molten salt extraction (MSE) residues and gave >95% plutonium and >90% americium recovery. The recovered plutonium contained 6 2- from high-chloride low-acid solution. Americium and other metals are washed from the ion exchange column with lN HNO 3 -4.8M NaCl. After elution, plutonium is recovered by hydroxide precipitation, and americium is recovered by NaHCO 3 precipitation. All filtrates from the process can be discardable as low-level contaminated waste. Production-scale experiments are in progress for MSE residues. Flow charts for actinide recovery from electro-refining and direct oxide reduction residues are presented and discussed

  11. Subsurface interactions of actinide species and microorganisms. Implications for the bioremediation of actinide-organic mixtures

    International Nuclear Information System (INIS)

    Banaszak, J.E.; Rittmann, B.E.; Reed, D.T.

    1999-01-01

    By reviewing how microorganisms interact with actinides in subsurface environments, the way how bioremediation controls the fate of actinides is assessed. Actinides often are co-contaminants with strong organic chelators, chlorinated solvents, and fuel hydrocarbons. Bioremediation can immobilize the actinides, biodegrade the co-contaminants, or both. Actinides at the IV oxidation state are the least soluble, and microorganisms accelerate precipitation by altering the actinide's oxidation state or its speciation. The way how microorganisms directly oxidize or reduce actinides and how microbiological reactions that biodegrade strong organic chelators, alter the pH, and consume or produce precipitating anions strongly affect actinide speciation and, therefore, mobility is described. Why inhibition caused by chemical or radiolytic toxicities uniquely affects microbial reactions is explained. Due to the complex interactions of the microbiological and chemical phenomena, mathematical modeling is an essential tool for research on and application of bioremediation involving co-contamination with actinides. Development of mathematical models that link microbiological and geochemical reactions is described. Throughout, the key research needs are identified. (author)

  12. Subsurface interactions of actinide species and microorganisms : implications for the bioremediation of actinide-organic mixtures

    International Nuclear Information System (INIS)

    Banaszak, J.E.; Reed, D.T.; Rittmann, B.E.

    1999-01-01

    By reviewing how microorganisms interact with actinides in subsurface environments, we assess how bioremediation controls the fate of actinides. Actinides often are co-contaminants with strong organic chelators, chlorinated solvents, and fuel hydrocarbons. Bioremediation can immobilize the actinides, biodegrade the co-contaminants, or both. Actinides at the IV oxidation state are the least soluble, and microorganisms accelerate precipitation by altering the actinide's oxidation state or its speciation. We describe how microorganisms directly oxidize or reduce actinides and how microbiological reactions that biodegrade strong organic chelators, alter the pH, and consume or produce precipitating anions strongly affect actinide speciation and, therefore, mobility. We explain why inhibition caused by chemical or radiolytic toxicities uniquely affects microbial reactions. Due to the complex interactions of the microbiological and chemical phenomena, mathematical modeling is an essential tool for research on and application of bioremediation involving co-contamination with actinides. We describe the development of mathematical models that link microbiological and geochemical reactions. Throughout, we identify the key research needs

  13. Subsurface interactions of actinide species and microorganisms : implications for the bioremediation of actinide-organic mixtures.

    Energy Technology Data Exchange (ETDEWEB)

    Banaszak, J.E.; Reed, D.T.; Rittmann, B.E.

    1999-02-12

    By reviewing how microorganisms interact with actinides in subsurface environments, we assess how bioremediation controls the fate of actinides. Actinides often are co-contaminants with strong organic chelators, chlorinated solvents, and fuel hydrocarbons. Bioremediation can immobilize the actinides, biodegrade the co-contaminants, or both. Actinides at the IV oxidation state are the least soluble, and microorganisms accelerate precipitation by altering the actinide's oxidation state or its speciation. We describe how microorganisms directly oxidize or reduce actinides and how microbiological reactions that biodegrade strong organic chelators, alter the pH, and consume or produce precipitating anions strongly affect actinide speciation and, therefore, mobility. We explain why inhibition caused by chemical or radiolytic toxicities uniquely affects microbial reactions. Due to the complex interactions of the microbiological and chemical phenomena, mathematical modeling is an essential tool for research on and application of bioremediation involving co-contamination with actinides. We describe the development of mathematical models that link microbiological and geochemical reactions. Throughout, we identify the key research needs.

  14. Mécanismes d'action des fines et des granulats de verre sur la réaction alcali-silice et la réaction pouzzolanique

    OpenAIRE

    Idir, Rachida

    2009-01-01

    Le recyclage du verre mixte contenant plusieurs couleurs pour la fabrication de nouveaux verres n'est actuellement pas économiquement viable. Ceci explique la recherche d'autres débouchés que le stockage ou l'enfouissement en décharges. L'une des applications envisageables est sa valorisation dans la fabrication des ciments et des bétons. Néanmoins, il est nécessaire de gérer les deux principaux comportements que peut avoir ce verre lorsqu'il est mis en contact avec une matrice cimentaire, à ...

  15. Le mixed price bundling, une stratégie marketing alternative ? Le cas bancaire des « offres jeunes »

    OpenAIRE

    Lambey-Checchin, Christine

    2013-01-01

    International audience; Pratique courante notamment chez les prestataires de service, le mixed price bundling consiste à vendre ensemble des produits ou services complémentaires à un prix spécial. La littérature a montré la supériorité de cette forme de bundling en étudiant ses effets sur les comportements des consommateurs. Le papier l'envisage comme une stratégie marketing et examine ses caractéristiques d'offre et de prix. Les résultats d'une analyse comparative des packages proposés par l...

  16. Signification biogéographique des processus d'adaptation photosynthétiques : 1. L'exemple des Kalanchoe malgaches

    OpenAIRE

    Brulfert, J.; Ravelomanana, D.; Gehrig, H.; Kluge, M.

    1996-01-01

    Le Métabolisme Acide des Crassulacées (CAM) est un type de photosynthèse présenté par les plantes qui ont dans les conditions naturelles à faire face à une contrainte hydrique. Il est caractérisé par la capacité de fixer le CO2 externe pendant la nuit (via la phosphoenolpyruvate carboxylase, PEPC) mais aussi pendant le jour (via la ribulose bisphosphate carboxylase oxygénase, Rubisco). Ces propriétés sont associées à un comportement particulier des stomates qui sont ouverts la nuit (favorisan...

  17. Advanced Aqueous Separation Systems for Actinide Partitioning

    Energy Technology Data Exchange (ETDEWEB)

    Nash, Kenneth L.; Clark, Sue; Meier, G Patrick; Alexandratos, Spiro; Paine, Robert; Hancock, Robert; Ensor, Dale

    2012-03-21

    One of the most challenging aspects of advanced processing of spent nuclear fuel is the need to isolate transuranium elements from fission product lanthanides. This project expanded the scope of earlier investigations of americium (Am) partitioning from the lanthanides with the synthesis of new separations materials and a centralized focus on radiochemical characterization of the separation systems that could be developed based on these new materials. The primary objective of this program was to explore alternative materials for actinide separations and to link the design of new reagents for actinide separations to characterizations based on actinide chemistry. In the predominant trivalent oxidation state, the chemistry of lanthanides overlaps substantially with that of the trivalent actinides and their mutual separation is quite challenging.

  18. Electronic structure and correlation effects in actinides

    International Nuclear Information System (INIS)

    Albers, R.C.

    1998-01-01

    This report consists of the vugraphs given at a conference on electronic structure. Topics discussed are electronic structure, f-bonding, crystal structure, and crystal structure stability of the actinides and how they are inter-related

  19. BWR Assembly Optimization for Minor Actinide Recycling

    Energy Technology Data Exchange (ETDEWEB)

    G. Ivan Maldonado; John M. Christenson; J.P. Renier; T.F. Marcille; J. Casal

    2010-03-22

    The Primary objective of the proposed project is to apply and extend the latest advancements in LWR fuel management optimization to the design of advanced boiling water reactor (BWR) fuel assemblies specifically for the recycling of minor actinides (MAs).

  20. Research for actinides extractants from various wastes

    International Nuclear Information System (INIS)

    Musikas, C.; Cuillerdier, C.; Condamines, N.

    1990-01-01

    This paper is an overview of the actinides solvent extraction research undertaken in Fontenay-aux-Roses. Two kinds of extractants are investigated; those usable for the improvement of the nowadays nuclear fuels reprocessing and those necessary for advanced fuels cycles which include the minor actinides (Np, Am) recovery for a further elimination through nuclear reactions. In the first class the mono and diamides, alternative to the organophosphorus extractants, TBP and polyfunctional phosphonates, showed promising properties. The main results are discussed. For the future efficient extractants for trivalent actinides-lanthanides group separations are suitable. The point about the actinides (III) - lanthanides (III) group separation chemistry and the development of some of these extractants are given

  1. Actinide isotopes in the marine environment

    International Nuclear Information System (INIS)

    Holm, E.; Fukai, R.

    1986-01-01

    Studies of actinide isotopes in the environment are important not only from the viewpoint of their radiological effects on human life, but also from the fact that they act as excellent biochemical and geochemical tracers especially in the marine environment. For several of the actinide isotopes there is still a lack of basic data on concentration levels and further investigations on their chemical and physical speciation are required to understand their behaviour in the marine environment. The measured and estimated activity concentration levels of artificial actinides are at present in general a few orders of magnitude lower than those of the natural ones and their concentration factors in biota are relatively low, except in a few species of macroalgae and phytoplankton. The contribution from seafood to total ingestion of actinides by the world population is a few per cent and, therefore, the dose to man from these long-lived radionuclides caused by seafood ingestion is usually low. (orig.)

  2. Robust membrane systems for actinide separations

    International Nuclear Information System (INIS)

    Jarvinen, Gordon D.; McCleskey, T. Mark; Bluhm, Elizabeth A.; Abney, Kent D.; Ehler, Deborah S.; Bauer, Eve; Le, Quyen T.; Young, Jennifer S.; Ford, Doris K.; Pesiri, David R.; Dye, Robert C.; Robison, Thomas W.; Jorgensen, Betty S.; Redondo, Antonio; Pratt, Lawrence R.; Rempe, Susan L.

    2000-01-01

    Our objective in this project is to develop very stable thin membrane structures containing ionic recognition sites that facilitate the selective transport of target metal ions, especially the actinides

  3. Synthèse bibliographique sur le comportement de recherche de l’hôte chez la punaise de lit (Cimex lectularius) et applications dans le cadre de la lutte intégrée

    OpenAIRE

    Legrand, Pauline; Verheggen, François; Haubruge, Eric; Francis, Frédéric

    2016-01-01

    Cette étude analyse le comportement de recherche de l’hôte chez la punaise de lit, Cimex lectularius, en portant une attention particulière sur les stimuli émis par l’Homme et impliqués dans ce processus d’orientation. Elle met également en évidence les applications possibles en matière de lutte intégrée. La punaise de lit est un ectoparasite exclusivement hématophage étroitement lié à l’Homme depuis des millénaires. Lors de sa recherche alimentaire, cet insecte utilise des stimuli émis pa...

  4. On the stability of non-linear systems; Sur la stabilite des systemes non-lineaires

    Energy Technology Data Exchange (ETDEWEB)

    Guelman, M [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires, services scientifiques

    1968-09-01

    A study is made of the absolute stability of nonlinear systems, using Liapounov's second method and taking into account the results obtained from V.M. Popov's work. The results already established are first presented, in particular concerning the frequency domain criterions for absolute stability of automatic control systems containing one single non linearity. The results have been extended to show the existence of a limiting parabola. New use is then made of the methods studied for deriving absolute stability criterions for a system containing a different type of non linearity. Finally, the results obtained are considered from the point of view of Aizerman's conjecture. (author) [French] Dans ce travail, on etudie la stabilite absolue des systemes non lineaires utilisant la deuxieme methode de Liapounov en tenant compte des resultats acquis a partir des travaux de V.M. Popov. On fait d'abord un expose des resultats deja etablis, en particulier en ce qui concerne les criteres frequentiels de stabilite absolue pour le cas d'un systeme de commande automatique comportant une seule non linearite. On a prolonge ces resultats jusqu'a l'etablissement de l'existence d'une parabole limite. On fait ensuite une nouvelle utilisation des methodes etudiees, etablissant des criteres de stabilite absolue pour un systeme comportant un type different de non linearite. On etudie enfin les resultats obtenus, dans l'optique de la conjecture de Aizerman. (auteur)

  5. Possible existence of backbending in actinide nuclei

    International Nuclear Information System (INIS)

    Dudek, J.; Nazarewicz, W.; Szymanski, Z.

    1982-01-01

    The possibilities for the backbending effect to occur in actinide nuclei are studied using the pairing-self-consistent independent quasiparticle method. The Hamiltonian used is that of the deformed Woods-Saxon potential plus monopole pairing term. The results of the calculations explain why there is no backbending in most actinide nuclei and simultaneously suggest that in some light neutron deficient nuclei around Th and 22 Ra a backbending effect may occur

  6. Lattice effects in the light actinides

    International Nuclear Information System (INIS)

    Lawson, A.C.; Cort, B.; Roberts, J.A.; Bennett, B.I.; Brun, T.O.; Dreele, R.B. von; Richardson, J.W. Jr.

    1998-01-01

    The light actinides show a variety of lattice effects that do not normally appear in other regions of the periodic table. The article will cover the crystal structures of the light actinides, their atomic volumes, their thermal expansion behavior, and their elastic behavior as reflected in recent thermal vibration measurements made by neutron diffraction. A discussion of the melting points will be given in terms of the thermal vibration measurements. Pressure effects will be only briefly indicated

  7. Transmutation of actinides in power reactors.

    Science.gov (United States)

    Bergelson, B R; Gerasimov, A S; Tikhomirov, G V

    2005-01-01

    Power reactors can be used for partial short-term transmutation of radwaste. This transmutation is beneficial in terms of subsequent storage conditions for spent fuel in long-term storage facilities. CANDU-type reactors can transmute the main minor actinides from two or three reactors of the VVER-1000 type. A VVER-1000-type reactor can operate in a self-service mode with transmutation of its own actinides.

  8. Predictive Modeling in Actinide Chemistry and Catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Ping [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-16

    These are slides from a presentation on predictive modeling in actinide chemistry and catalysis. The following topics are covered in these slides: Structures, bonding, and reactivity (bonding can be quantified by optical probes and theory, and electronic structures and reaction mechanisms of actinide complexes); Magnetic resonance properties (transition metal catalysts with multi-nuclear centers, and NMR/EPR parameters); Moving to more complex systems (surface chemistry of nanomaterials, and interactions of ligands with nanoparticles); Path forward and conclusions.

  9. Subcritical limits for special fissile actinides

    International Nuclear Information System (INIS)

    Clark, H.K.

    1980-01-01

    Critical masses and subcritical mass limits in oxide-water mixtures were calculated for actinide nuclides other than /sup 233/U, /sup 235/U, and /sup 239/Pu that have an odd number of neutrons in the nucleus; S/sub n/ transport theory was used together with cross sections, drawn from the GLASS multigroup library, developed to provide accurate forecasts of actinide production at Savannah River

  10. Proposal for experiments with actinide elements

    International Nuclear Information System (INIS)

    Sanchez, R.G.

    1994-01-01

    An analytical study was conducted in which critical masses for some actinide isotopes were calculated with the Monte Carlo Neutron Photon (MCNP) Transport computer code. Different spherical computer models were used for even- and odd-neutron nuclides. Critical masses obtained are tabulated for Np-237, Pu-242, Am-241, Am-243, Pu-241, and Am-242m, together with indirect experimental data. Experimental data are needed for actinides with odd number of neutrons

  11. Interaction between actinides and protein: the calmodulin

    International Nuclear Information System (INIS)

    Brulfert, Florian

    2016-01-01

    Considering the environmental impact of the Fukushima nuclear accident, it is fundamental to study the mechanisms governing the effects of the released radionuclides on the biosphere and thus identify the molecular processes generating the transport and deposition of actinides, such as neptunium and uranium. However, the information about the microscopic aspect of the interaction between actinides and biological molecules (peptides, proteins...) is scarce. The data being mostly reported from a physiological point of view, the structure of the coordination sites remains largely unknown. These microscopic data are indeed essential for the understanding of the interdependency between structural aspect, function and affinity.The Calmodulin (CaM) (abbreviation for Calcium-Modulated protein), also known for its affinity towards actinides, acts as a metabolic regulator of calcium. This protein is a Ca carrier, which is present ubiquitously in the human body, may also bind other metals such as actinides. Thus, in case of a contamination, actinides that bind to CaM could avoid the protein to perform properly and lead to repercussions on a large range of vital functions.The complexation of Np and U was studied by EXAFS spectroscopy which showed that actinides were incorporated in a calcium coordination site. Once the thermodynamical and structural aspects studied, the impact of the coordination site distortion on the biological efficiency was analyzed. In order to evaluate these consequences, a calorimetric method based on enzyme kinetics was developed. This experiment, which was conducted with both uranium (50 - 500 nM) and neptunium (30 - 250 nM) showed a decrease of the heat produced by the enzymatic reaction with an increasing concentration of actinides in the medium. Our findings showed that the Calmodulin actinide complex works as an enzymatic inhibitor. Furthermore, at higher neptunium (250 nM) and uranium (500 nM) concentration the metals seem to have a poison

  12. Positron Spectroscopy of Hydrothermally Grown Actinide Oxides

    Science.gov (United States)

    2014-03-27

    actinide oxides . The work described here is an attempt to characterize the quality of crystals using positron annihilation spectroscopy (PALS). The...Upadhyaya, R. V. Muraleedharan, B. D. Sharma and K. G. Prasad, " Positron lifetime studies on thorium oxide powders," Philosohical Magazine A, vol. 45... crystals . A strong foundation for actinide PALS studies was laid, but further work is required to build a more effective system. Positron Spectroscopy

  13. Separation of actinides and their transmutation

    International Nuclear Information System (INIS)

    Bouchard, M.; Bathelier, M.; Cousin, M.

    1978-08-01

    Neutron irradiation of long-half-life actinides for transmutation into elements with shorter half-life is investigated as a means to reduce the long-term hazards of these actinides. The effectiveness of the method is analysed by applying it to fission product solutions from the first extraction cycle of fuel reprocessing plants. Basic principles, separation techniques and transmutation efficiencies are studied and discussed in detail

  14. The removal of actinide metals from solution

    International Nuclear Information System (INIS)

    Hancock, R.D.; Howell, I.V.

    1980-01-01

    A process is specified for removing actinide metals (e.g. uranium) from solutions. The solution is contacted with a substrate comprising the product obtained by reacting an inorganic solid containing surface hydroxyl groups (e.g. silica gel) with a compound containing a silane grouping, a nitrogen-containing group (e.g. an amine) and other specified radicals. After treatment, the actinide metal is recovered from the substrate. (U.K.)

  15. PREPARATION OF ACTINIDE-ALUMINUM ALLOYS

    Science.gov (United States)

    Moore, R.H.

    1962-09-01

    BS>A process is given for preparing alloys of aluminum with plutonium, uranium, and/or thorium by chlorinating actinide oxide dissolved in molten alkali metal chloride with hydrochloric acid, chlorine, and/or phosgene, adding aluminum metal, and passing air and/or water vapor through the mass. Actinide metal is formed and alloyed with the aluminum. After cooling to solidification, the alloy is separated from the salt. (AEC)

  16. Evaluation of actinide partitioning and transmutation

    International Nuclear Information System (INIS)

    1982-01-01

    After a few centuries of radioactive decay the long-lived actinides, the elements of atomic numbers 89-103, may constitute the main potential radiological health hazard in nuclear wastes. This is because all but a very few fission products (principally technetium-99 and iodine-129) have by then undergone radioactive decay to insignificant levels, leaving the actinides as the principal radionuclides remaining. It was therefore at first sight an attractive concept to recycle the actinides to nuclear reactors, so as to eliminate them by nuclear fission. Thus, investigations of the feasibility and potential benefits and hazards of the concept of 'actinide partitioning and transmutation' were started in numerous countries in the mid-1970s. This final report summarizes the results and conclusions of technical studies performed in connection with a four-year IAEA Co-ordinated Research Programme, started in 1976, on the ''Environmental Evaluation and Hazard Assessment of the Separation of Actinides from Nuclear Wastes followed by either Transmutation or Separate Disposal''. Although many related studies are still continuing, e.g. on waste disposal, long-term safety assessments, and waste actinide management (particularly for low and intermediate-level wastes), some firm conclusions on the overall concept were drawn by the programme participants, which are reflected in this report

  17. Advances in computational actinide chemistry in China

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Dongqi; Wu, Jingyi; Chai, Zhifang [Chinese Academy of Sciences, Beijing (China). Multidisciplinary Initiative Center; Su, Jing [Chinese Academy of Sciences, Shanghai (China). Div. of Nuclear Materials Science and Engineering; Li, Jun [Tsinghua Univ., Beijing (China). Dept. of Chemistry and Laboratory of Organic Optoelectronics and Molecular Engineering

    2014-04-01

    The advances in computational actinide chemistry made in China are reviewed. Several areas relevant to chemistry of actinides in gas, liquid, and solid phases have been explored. However, we limit the scope to selected contributions in the chemistry of molecular actinide systems in gas and liquid phases. These studies may be classified into two categories: treatment of relativistic effects, which cover the development of two- and four-component Hamiltonians and the optimization of relativistic pseudopotentials, and the applications of theoretical methods in actinide chemistry. The applications include (1) the electronic structures of actinocene, noble gas complexes, An-C multiple bonding compounds, uranyl and its isoelectronic species, fluorides and oxides, molecular systems with metal-metal bonding in their isolated forms (U{sub 2}, Pu{sub 2}) and in fullerene (U{sub 2} rate at C{sub 60}), and the excited states of actinide complexes; (2) chemical reactions, including oxidation, hydrolysis of UF{sub 6}, ligand exchange, reactivities of thorium oxo and sulfido metallocenes, CO{sub 2}/CS{sub 2} functionalization promoted by trivalent uranium complex; and (3) migration of actinides in the environment. A future outlook is discussed. (orig.)

  18. Rapid determination of actinides in seawater samples

    International Nuclear Information System (INIS)

    Maxwell, S.L.; Culligan, B.K.; Hutchison, J.B.; Utsey, R.C.; McAlister, D.R.

    2014-01-01

    A new rapid method for the determination of actinides in seawater samples has been developed at the Savannah River National Laboratory. The actinides can be measured by alpha spectrometry or inductively-coupled plasma mass spectrometry. The new method employs novel pre-concentration steps to collect the actinide isotopes quickly from 80 L or more of seawater. Actinides are co-precipitated using an iron hydroxide co-precipitation step enhanced with Ti +3 reductant, followed by lanthanum fluoride co-precipitation. Stacked TEVA Resin and TRU Resin cartridges are used to rapidly separate Pu, U, and Np isotopes from seawater samples. TEVA Resin and DGA Resin were used to separate and measure Pu, Am and Cm isotopes in seawater volumes up to 80 L. This robust method is ideal for emergency seawater samples following a radiological incident. It can also be used, however, for the routine analysis of seawater samples for oceanographic studies to enhance efficiency and productivity. In contrast, many current methods to determine actinides in seawater can take 1-2 weeks and provide chemical yields of ∼30-60 %. This new sample preparation method can be performed in 4-8 h with tracer yields of ∼85-95 %. By employing a rapid, robust sample preparation method with high chemical yields, less seawater is needed to achieve lower or comparable detection limits for actinide isotopes with less time and effort. (author)

  19. Gouvernance environnementale locale et comportements économiques

    Directory of Open Access Journals (Sweden)

    Christophe Beaurain

    2004-02-01

    Full Text Available La notion de gouvernance est mobilisée de manière croissante aujourd’hui pour évoquer de nouvelles formes de coopérations entre acteurs de la vie économique et sociale. Appliquée aux questions environnementales, la gouvernance pose à la fois la question de la maîtrise du temps par les acteurs et celle du territoire d’application des décisions prises. On peut donc considérer qu’elle engage un renouvellement de l’articulation entre le temps et l’espace, que doit prendre en compte l’analyse des choix économiques dans ce domaine. L’exemple du bassin d’emploi dunkerquois montre que cette articulation est au cœur d’une participation des entreprises à la gouvernance environnementale.The concept of governance is more and more raised to conjure up new ways of cooperation between actors of the economic and social life. Applied to environmental matters, governance ask both the question of mastery of the time and the one of the territory’s application for taken decisions. We can consider that it engage a renewal of the joint between time and space, that the analysis of economic choices had to take into account. The example of “Dunkerque” show that this joint is the heart of firm’s collaboration in environmental governance.

  20. Radioactive contamination of aquatic media and organisms; La contamination radioactive des milieux et des organismes aquatiques

    Energy Technology Data Exchange (ETDEWEB)

    Fontaine, Y [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    After a brief account of the radioactive wastes produced by peaceful or military uses of Atomic Industry, the author first describes a series of observations carried out 'in the field' on the extent of contamination in aquatic organisms with respect to that of the medium. The experimental studies are then analysed, with reference both to the radioisotope metabolism and to the factors and types of contamination of aquatic organisms by wastes from atomic industry. A precise experimental project is presented at the end of the paper, including almost 300 references. (author) [French] Apres une courte etude des dechets radioactifs produits par les utilisations pacifiques ou militaires de l'Industrie Atomique, l'auteur fait etat d'abord des observations effectuees 'sur le terrain' concernant l'extension de la contamination des organismes aquatiques en rapport avec celle du milieu. L'auteur analyse ensuite les etudes experimentales se rapportant aussi bien au metabolisme des radioisotopes qu'aux facteurs et aux modalites de la contamination des organismes aquatiques par les dechets de l'industrie atomique. Un projet de travail experimental precis est presente a la fin de cette revue qui comporte pres de 300 references bibliographiques. (auteur)

  1. Radioactive contamination of aquatic media and organisms; La contamination radioactive des milieux et des organismes aquatiques

    Energy Technology Data Exchange (ETDEWEB)

    Fontaine, Y. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    After a brief account of the radioactive wastes produced by peaceful or military uses of Atomic Industry, the author first describes a series of observations carried out 'in the field' on the extent of contamination in aquatic organisms with respect to that of the medium. The experimental studies are then analysed, with reference both to the radioisotope metabolism and to the factors and types of contamination of aquatic organisms by wastes from atomic industry. A precise experimental project is presented at the end of the paper, including almost 300 references. (author) [French] Apres une courte etude des dechets radioactifs produits par les utilisations pacifiques ou militaires de l'Industrie Atomique, l'auteur fait etat d'abord des observations effectuees 'sur le terrain' concernant l'extension de la contamination des organismes aquatiques en rapport avec celle du milieu. L'auteur analyse ensuite les etudes experimentales se rapportant aussi bien au metabolisme des radioisotopes qu'aux facteurs et aux modalites de la contamination des organismes aquatiques par les dechets de l'industrie atomique. Un projet de travail experimental precis est presente a la fin de cette revue qui comporte pres de 300 references bibliographiques. (auteur)

  2. Recovery of Actinides from Actinide-Aluminium Alloys: Chlorination Route

    International Nuclear Information System (INIS)

    Mendes, E.; Malmbeck, R.; Soucek, P.; Jardin, R.; Glatz, J.P.; Cassayre, L.

    2008-01-01

    A method for recovery of actinides (An) from An-Al alloys formed by electrochemical separation of metallic spent nuclear fuel on solid aluminium electrodes in molten chloride salts is described. The proposed route consists of three main steps: -) vacuum distillation of salt adhered on the electrodes, -) chlorination of An-Al alloy by pure chlorine gas and -) sublimation of formed AlCl 3 . A thermochemical study of the route was performed to determine important chemical reactions and to find optimum experimental conditions for all process steps. Vacuum distillation of the electrode is efficient for complete removal of remaining salt and most fission products, full chlorination of the An-Al alloys is possible at any working temperature and evaporation of AlCl 3 is achieved by heating under argon. Experiments have been carried out using U-Al alloy in order to define parameters providing full alloy chlorination without formation of volatile UCl 5 and UCl 6 . It was shown that full chlorination of An-Al alloys without An losses should be possible at a temperature approx. 150 deg. C. (authors)

  3. Recovery of Actinides from Actinide-Aluminium Alloys: Chlorination Route

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, E.; Malmbeck, R.; Soucek, P.; Jardin, R.; Glatz, J.P. [European Commission, JRC, Institute for Transuranium Elements, Postfach 2340, 76125 Karlsruhe (Germany); Cassayre, L. [Laboratoire de Genie Chimique (LGC), Universite Paul Sabatier, UMR CNRS 5503, 118 route de Narbonne, 31062 Toulouse Cedex 04 (France)

    2008-07-01

    A method for recovery of actinides (An) from An-Al alloys formed by electrochemical separation of metallic spent nuclear fuel on solid aluminium electrodes in molten chloride salts is described. The proposed route consists of three main steps: -) vacuum distillation of salt adhered on the electrodes, -) chlorination of An-Al alloy by pure chlorine gas and -) sublimation of formed AlCl{sub 3}. A thermochemical study of the route was performed to determine important chemical reactions and to find optimum experimental conditions for all process steps. Vacuum distillation of the electrode is efficient for complete removal of remaining salt and most fission products, full chlorination of the An-Al alloys is possible at any working temperature and evaporation of AlCl{sub 3} is achieved by heating under argon. Experiments have been carried out using U-Al alloy in order to define parameters providing full alloy chlorination without formation of volatile UCl{sub 5} and UCl{sub 6}. It was shown that full chlorination of An-Al alloys without An losses should be possible at a temperature approx. 150 deg. C. (authors)

  4. Reactor physics aspects of burning actinides in a nuclear reactor

    International Nuclear Information System (INIS)

    Hage, W.; Schmidt, E.

    1978-01-01

    A short review of the different recycling strategies of actinides other than fuel treated in the literature, is given along with nuclear data requirements for actinide build-up and transmutation studies. The effects of recycling actinides in a nuclear reactor on the flux distribution, the infinite neutron multiplication factor, the reactivity control system, the reactivity coefficients and the delayed neutron fraction are discussed considering a notional LWR or LMFBR as an Actinide Trasmutaton Reactor. Some operational problems of Actinide Transmutation reactors are mentioned, which are caused by the α-decay heat and the neutron sources of Actinide Target Elements

  5. Heavy water reactors physics; Physique des reacteurs a eau lourde

    Energy Technology Data Exchange (ETDEWEB)

    Girard, Y; Lourme, P; Naudet, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    particulieres aux reseaux comportant le refroidissement par gaz mesures de distributions fines de densite (indices de spectre, etc mesures sur des reseaux ou des echantillons comportant de l'uranium a des enrichissements differents ou du plutonium. Dans la deuxieme partie on passe en revue les etudes de caractere theorique. L'ensemble des resultats a permis d'asseoir des methodes de calcul qui ont accru notablement la comprehension des phenomenes neutroniques dans les reseaux, et d'etablir un formulaire rendant compte des experiences sur reseaux neufs et capable de predire correctement l'evolution des proprietes neutroniques du combustible avec l'irradiation. Quelques etudes particulieres aux reacteurs de puissance sont mentionnees. (auteurs)

  6. Incidence des mesures antitabac et de la contrebande sur la ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ils intégreront les résultats préliminaires tirés de l'enquête mondiale sur le tabagisme chez les adultes qu'ont réalisée le ministère de la Santé et l'Instituto Conmemorativo Gorgas de Estudios de la Salud en 2012. Ces données seront intégrées à une analyse de la demande plus structurée comportant des intervalles ...

  7. Changements organisationnels, structures industrielles et innovations environnementales : le cas des firmes industrielles françaises

    OpenAIRE

    Nadel, Simon

    2014-01-01

    La thèse analyse les déterminants de l’adoption des innovations environnementales dans l’industrie française et ses interactions avec les changements organisationnels, d’une part, et les structures industrielles, d’autre part. Elle offre tout d’abord une revue de la littérature économique qui fonde l’analyse de l’innovation environnementale. Elle propose ensuite une analyse empirique, sur données d’entreprise, du comportement éco-innovateur des firmes autour de trois éclairages. La première p...

  8. Littoral Infrared Ship Self Defence Technology Studies (Autodefense cotiere infrarouge des navires etudes technologiques)

    Science.gov (United States)

    2014-05-01

    Panels, vous pouvez demander d’être inclus soit à titre personnel, soit au nom de votre organisation, sur la liste d’envoi. Les publications de la STO...doivent comporter la dénomination « STO », « RTO » ou « AGARD » selon le cas, suivi du numéro de série. Des informations analogues, telles que le titre ...ou « AGARD » selon le cas, suivie du numéro de série (par exemple AGARD-AG-315). Des informations analogues, telles que le titre et la date de

  9. Actinide transmutation in nuclear reactors

    International Nuclear Information System (INIS)

    Bultman, J.H.

    1995-01-01

    An optimization method is developed to maximize the burning capability of the ALMR while complying with all constraints imposed on the design for reliability and safety. This method leads to a maximal transuranics enrichment, which is being limited by constraints on reactivity. The enrichment can be raised by using the neutrons less efficiently by increasing leakage from the fuel. With the developed optimization method, a metallic and an oxide fueled ALMR were optimized. Both reactors perform equally well considering the burning of transuranics. However, metallic fuel has a much higher heat conductivity coefficient, which in general leads to better safety characteristics. In search of a more effective waste transmuter, a modified Molten Salt Reactor was designed. A MSR operates on a liquid fuel salt which makes continuous refueling possible, eliminating the issue of the burnup reactivity loss. Also, a prompt negative reactivity feedback is possible for an overmoderated reactor design, even when the Doppler coefficient is positive, due to the fuel expansion with fuel temperature increase. Furthermore, the molten salt fuel can be reprocessed based on a reduction process which is not sensitive to the short-lived spontaneously fissioning actinides. (orig./HP)

  10. Actinide/crown ether chemistry

    International Nuclear Information System (INIS)

    Benning, M.M.

    1988-01-01

    A structural survey of actinide/crown ether compounds was conducted in order to investigate the solid state chemistry of these complexes. Several parameters - the metal size, crown type, counterion, solvent systems and reaction and crystallization conditions - were varied to correlate their importance in complexation. Under atmospheric conditions, two types of complexes were isolated, those containing only hydrogen-bonded crown interactions and instances where the crown interacts directly with the metal center. In both cases, water seems to play a very important role. When coordinated to the metal, water molecules exhibit the necessary donor properties required for the formation of hydrogen-bonded contacts. The water molecules also provide fierce competition with the crown ethers for metal-binding sites and in most cases prohibit the formation of complexes in which direct metal-ligand association exists. The results of this study indicate that direct interaction between the metal atoms and the crown ethers, in the presence of water, can only occur with polyether conformations which limit the steric replusions within the metal coordination sphere

  11. Actinide transmutation in nuclear reactors

    Energy Technology Data Exchange (ETDEWEB)

    Bultman, J H

    1995-01-17

    An optimization method is developed to maximize the burning capability of the ALMR while complying with all constraints imposed on the design for reliability and safety. This method leads to a maximal transuranics enrichment, which is being limited by constraints on reactivity. The enrichment can be raised by using the neutrons less efficiently by increasing leakage from the fuel. With the developed optimization method, a metallic and an oxide fueled ALMR were optimized. Both reactors perform equally well considering the burning of transuranics. However, metallic fuel has a much higher heat conductivity coefficient, which in general leads to better safety characteristics. In search of a more effective waste transmuter, a modified Molten Salt Reactor was designed. A MSR operates on a liquid fuel salt which makes continuous refueling possible, eliminating the issue of the burnup reactivity loss. Also, a prompt negative reactivity feedback is possible for an overmoderated reactor design, even when the Doppler coefficient is positive, due to the fuel expansion with fuel temperature increase. Furthermore, the molten salt fuel can be reprocessed based on a reduction process which is not sensitive to the short-lived spontaneously fissioning actinides. (orig./HP).

  12. Lithium actinide recycle process demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, G.K.; Pierce, R.D.; McPheeters, C.C. [Argonne National Laboratory, IL (United States)

    1995-10-01

    Several pyrochemical processes have been developed in the Chemical Technology Division of Argonne Laboratory for recovery of actinide elements from LWR spent fuel. The lithium process was selected as the reference process from among the options. In this process the LWR oxide spent fuel is reduced by lithium at 650{degrees}C in the presence of molten LiCl. The Li{sub 2}O formed during the reduction process is soluble in the salt. The spent salt and lithium are recycled after the Li{sub 2}O is electrochemically reduced. The oxygen is liberated as CO{sub 2} at a carbon anode or oxygen at an inert anode. The reduced metal components of the LWR spent fuel are separated from the LiCL salt phase and introduced into an electrorefiner. The electrorefining step separates the uranium and transuranium (TRU) elements into two product streams. The uranium product, which comprises about 96% of the LWR spent fuel mass, may be enriched for recycle into the LWR fuel cycle, stored for future use in breeder reactors, or converted to a suitable form for disposal as waste. The TRU product can be recycled as fast reactor fuel or can be alloyed with constituents of the LWR cladding material to produce a stable waste form.

  13. Comportement à la corrosion intrinsèque de couches minces à base ...

    African Journals Online (AJOL)

    Comportement à la corrosion intrinsèque de couches minces à base d'aluminium (Al-M: M=Mo, Mg, ... Département de Physique, Université Badji Mokhtar, BP 12, Annaba 23000, Algérie. .... dépôts réalisés sur substrat en verre servent pour la ...

  14. Etude expérimentale et analyse probabiliste du comportement à la ...

    African Journals Online (AJOL)

    DK

    en traction de composites verre-perlon-acrylique à usage orthopédique. Experimental ... du comportement à la rupture de ces stratifiés ainsi que l'aspect probabiliste de cette dernière sont décrits .... signification physique qui donne au volume.

  15. Comparative study of the creep behaviour of single crystals and polycrystals of alpha uranium; Etude comparee du comportement au fluage de l'uranium alpha mono et polycristallin

    Energy Technology Data Exchange (ETDEWEB)

    Andre, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-03-01

    In the first chapter, one describes the creep machine developed to study the deformation of uranium at high temperature in vacuum with a continuous recording. The second chapter presents the results concerning the polycrystals of uranium. The application of the DORN method gives an activation energy for creep of 42 {+-} 2 Kc, above 550 Celsius degrees, equal to the activation energy for self-diffusion. The study of the variation of the creep rate with the applied stress and the metallographic observations of the deformation induced polygonization allow to conclude that the deformation is controlled by climb of dislocations. In the third chapter, the deformation above 550 Celsius degrees of single crystals of uranium (obtained by {beta} {yields} {alpha} change) is studied. The major deformation mode is slip. The preexisting polygonization of these single crystals is very stable and the disorientation between adjacent sub-grains increases with the deformation. The activation energy for creep is higher than that for polycrystals. These results show the influence of the polygonization due to the {beta} {yields} {alpha} change on the creep behaviour of {alpha} uranium. (authors) [French] Dans le premier chapitre, on decrit la machine de fluage sous vide a enregistrement continu, mise au point pour etudier le phenomene. Le deuxieme chapitre presente les resultats relatifs aux polycristaux. L'utilisation de la methode de DORN a permis de constater que, au-dessus de 550 degres Celsius, l'energie d'activation pour le fluage avait une valeur constante egale a 42 {+-} 2 Kc, voisine de la chaleur d'autodiffusion. L'etude de l'influence de la contrainte appliquee sur la vitesse de fluage et l'observation micrographique de la polygonisation developpee au cours de la deformation permettent de conclure que le phenomene est controle par la montee des dislocations. Dans le troisieme chapitre, on etudie le comportement au fluage au-dessus de 550 C des monocristaux obtenus par

  16. La psychologie du comportement de Pierre Naville (1904-1993).

    OpenAIRE

    Carbonel , Frédéric

    2012-01-01

    working paper ; preprint non référencé; Acquis au marxisme dès 1925, militant trotskiste depuis 1928, Pierre Naville est mobilisé en septembre 1939 comme simple caporal au train des Equipages sur Paris puis au secrétariat du cabinet Daladier au tout début de la " drôle de guerre ". On oublie trop souvent l'œuvre critique de Pierre Naville en matière de psychologie essentiellement développée entre 1942 et 1945.

  17. Study of actinide paramagnetism in solution

    International Nuclear Information System (INIS)

    Autillo, Matthieu

    2015-01-01

    The physiochemical properties of actinide (An) solutions are still difficult to explain, particularly the behavioral differences between An(III) and Ln(III). The study of actinide paramagnetic behavior may be a 'simple' method to analyze the electronic properties of actinide elements and to obtain information on the ligand-actinide interaction. The objective of this PhD thesis is to understand the paramagnetic properties of these elements by magnetic susceptibility measurements and chemical shift studies. Studies on actinide electronic properties at various oxidation states in solution were carried out by magnetic susceptibility measurements in solution according to the Evans method. Unlike Ln(III) elements, there is no specific theory describing the magnetic properties of these ions in solution. To obtain accurate data, the influence of experimental measurement technique and radioactivity of these elements was analyzed. Then, to describe the electronic structure of their low energy states, the experimental results were complemented with quantum chemical calculations from which the influence of the ligand field was studied. Finally, these interpretations were applied to better understand the variations in the magnetic properties of actinide cations in chloride and nitrate media. Information about ligand-actinide interactions may be determined from an NMR chemical shift study of actinide complexes. Indeed, modifications induced by a paramagnetic complex can be separated into two components. The first component, a Fermi contact contribution (δ_c) is related to the degree of covalency in coordination bonds with the actinide ions and the second, a dipolar contribution (δ_p_c) is related to the structure of the complex. The paramagnetic induced shift can be used only if we can isolate these two terms. To achieve this study on actinide elements, we chose to work with the complexes of dipicolinic acid (DPA). Firstly, to characterize the geometrical parameters, a

  18. Actinide science. Fundamental and environmental aspects

    International Nuclear Information System (INIS)

    Choppin, Gregory R.

    2005-01-01

    Nuclear test explosions and reactor wastes have deposited an estimated 16x10 15 Bq of plutonium into the world's aquatic systems. However, plutonium concentration in open ocean waters is orders of magnitude less, indicating that most of the plutonium is quite insolvable in marine waters and has been incorporated into sediments. Actinide ions in waters often are not in a state of thermodynamic equilibrium and their solubility and migration behavior is related to the form in which the nuclides were introduced into the aquatic system. Actinide solubility depends on such factors as pH(hydrolysis), E H (oxidation state), reaction with complexants (e.g. carbonate, phosphate, humic acid, etc.) sorption to surfaces of minerals and/or colloids, etc., in the water. The most significant of these variables is the oxidation sate of the metal ion. The simultaneous presence of more than one oxidation state for some actinides (e.g. plutonium) in a solution complicates actinide environmental behavior. Both Np(V)O 2 + and Pu(V)O 2 + , the most significant soluble states in natural oxic waters are relatively noncomplexing and resistant to hydrolysis and subsequent precipitation but can undergo reduction to the Pu(IV) oxidation state with its different elemental behavior. The solubility of NpO 2 + can be as high as 10 -4 M while that of PuO 2 + is more limited by reduction to the insoluble tetravalent species, Pu(OH) 4 , (pK SP - 56). The net solubility of hexavalent UO 2 2+ in sea water is also limited by hydrolysis; however, it has a relatively high concentration due to formation of carbonate complexes. The insoluble trivalent americium hydroxocarbonate, Am(CO) 3 (OH), is the limiting species for the solubility of Am(III) in sea water. Thorium is found exclusively as the tetravalent species and its solubility is limited by the formation of quite insoluble Th(OH) 4 . The chemistry of actinide ions in the environment is reviewed to show the spectrum of reactions that can occur in

  19. Comportement en vapocraquage de molécules modèles et de distillats sous vide hydrotraités. Deuxième partie : pyrolyse de molécules modèles représentatives des distillats sous vide bruts et hydrotraités Steam-Cracking Behavior of Model Molecules and Hydrotreated Vacuum Distillates Part Two: Pyrolysis of Model Molecules Representative of Unprocessed and Hydrotreated Vacuum Distillates

    Directory of Open Access Journals (Sweden)

    Freund E.

    2006-11-01

    Full Text Available La pyrolyse de molécules modèles a permis sur la base d'écarts de rendements obtenus entre le n -décane et leur mélange à 20 % avec celui-ci, l'établissement d'une échelle de potentialité de craquage présentée précédemment. L'approche des phénomènes de pyrolyse par des schémas réactionnels simplifiés est développée dans le présent article pour des molécules modèles, exemples de chaque grande famille susceptible de constituer le distillat sous vide : le perhydrophénanthrène pour les naphtènes lourds, l'octahydrophénanthrène symétrique pour les naphténoaromatiques, le naphtalène et l'alpha méthylnaphtalène pour les aromatiques méthylés ou non, le dodécylbenzène pour les aromatiques substitués par une longue chaîne aliphatique. Le cas de l'acénaphtylène a été examiné à part. On the basis of differences in yields obtained between n-decane and a 20% mixture of model molecules with n-decane, the pyrolysis of model molecules was used to determine a cracking potentiality scale that was previous described. The present article describes the approach to pyrolysis phenomena by simplified reaction mechanisms for model molecules taken from each major family liable to make up vacuum distillate, i. e. perhydrophenanthrene for heavy naphthenes, symmetrical octahydrophenanthrene for naphthenoaromatics, naphthalene and alpha-methynaphthalene for methylated or nonmethylated aromatics, dodecylbenzene for aromatics substituted for by a long aliphatic chain. The case of acenaphthylene is examined separately.

  20. Use of fast reactors for actinide transmutation

    International Nuclear Information System (INIS)

    1993-03-01

    The management of radioactive waste is one of the key issues in today's discussions on nuclear energy, especially the long term disposal of high level radioactive wastes. The recycling of plutonium in liquid metal fast breeder reactors (LMFBRs) would allow 'burning' of the associated extremely long life transuranic waste, particularly actinides, thus reducing the required isolation time for high level waste from tens of thousands of years to hundreds of years for fission products only. The International Working Group on Fast Reactors (IWGFR) decided to include the topic of actinide transmutation in liquid metal fast breeder reactors in its programme. The IAEA organized the Specialists Meeting on Use of Fast Breeder Reactors for Actinide Transmutation in Obninsk, Russian Federation, from 22 to 24 September 1992. The specialists agree that future progress in solving transmutation problems could be achieved by improvements in: Radiochemical partitioning and extraction of the actinides from the spent fuel (at least 98% for Np and Cm and 99.9% for Pu and Am isotopes); technological research and development on the design, fabrication and irradiation of the minor actinides (MAs) containing fuels; nuclear constants measurement and evaluation (selective cross-sections, fission fragments yields, delayed neutron parameters) especially for MA burners; demonstration of the feasibility of the safe and economic MA burner cores; knowledge of the impact of maximum tolerable amount of rare earths in americium containing fuels. Refs, figs and tabs

  1. TUCS/phosphate mineralization of actinides

    Energy Technology Data Exchange (ETDEWEB)

    Nash, K.L. [Argonne National Lab., IL (United States)

    1997-10-01

    This program has as its objective the development of a new technology that combines cation exchange and mineralization to reduce the concentration of heavy metals (in particular actinides) in groundwaters. The treatment regimen must be compatible with the groundwater and soil, potentially using groundwater/soil components to aid in the immobilization process. The delivery system (probably a water-soluble chelating agent) should first concentrate the radionuclides then release the precipitating anion, which forms thermodynamically stable mineral phases, either with the target metal ions alone or in combination with matrix cations. This approach should generate thermodynamically stable mineral phases resistant to weathering. The chelating agent should decompose spontaneously with time, release the mineralizing agent, and leave a residue that does not interfere with mineral formation. For the actinides, the ideal compound probably will release phosphate, as actinide phosphate mineral phases are among the least soluble species for these metals. The most promising means of delivering the precipitant would be to use a water-soluble, hydrolytically unstable complexant that functions in the initial stages as a cation exchanger to concentrate the metal ions. As it decomposes, the chelating agent releases phosphate to foster formation of crystalline mineral phases. Because it involves only the application of inexpensive reagents, the method of phosphate mineralization promises to be an economical alternative for in situ immobilization of radionuclides (actinides in particular). The method relies on the inherent (thermodynamic) stability of actinide mineral phases.

  2. Band structure studies of actinide systems

    International Nuclear Information System (INIS)

    Koelling, D.D.

    1976-01-01

    The nature of the f-orbitals in an actinide system plays a crucial role in determining the electronic properties. It has long been realized that when the actinide separation is small enough for the f-orbitals to interact directly, the system will exhibit itinerant electron properties: an absence of local moment due to the f-orbitals and sometimes even superconductivity. However, a number of systems with the larger actinide separation that should imply local moment behavior also exhibit intinerant properties. Such systems (URh 3 , UIr 3 , UGe 3 , UC) were examined to learn something about the other f-interactions. A preliminary observation made is that there is apparently a very large and ansiotropic mass enhancement in these systems. There is very good reason to believe that this is not solely due to large electron--electron correlations but to a large electron--phonon interaction as well. These features of the ''non-magnetic'', large actinide separation systems are discussed in light of our results to date. Finally, the results of some recent molecular calculations on actinide hexafluorides are used to illustrate the shielding effects on the intra-atomic Coulomb term U/sub f-f/ which would appear in any attempt to study the formation of local moments. As one becomes interested in materials for which a band structure is no longer an adequate model, this screened U/sub ff/ is the significant parameter and efforts must be made to evaluate it in solid state systems

  3. Nonaqueous method for dissolving lanthanide and actinide metals

    International Nuclear Information System (INIS)

    Crisler, L.R.

    1975-01-01

    Lanthanide and actinide beta-diketonate complex molecular compounds are produced by reacting a beta-diketone compound with a lanthanide or actinide element in the elemental metallic state in a mixture of carbon tetrachloride and methanol

  4. Strategies for minority actinides transmutation in fast reactors

    International Nuclear Information System (INIS)

    Perez-Martin, S.; Martin-Fuertes, F.; Alvarez-Velarde, F.

    2010-01-01

    Presentation of the strategies that can be followed in fast reactors designed for the fourth generation to reduce the inventory of minority actinides generated in current light water reactors, as the actinides generation in fast reactor.

  5. Efficacité d'un exutoire de dévalaison pour smolts de saumon atlantique (Salmo salar L.) et comportement des poissons au niveau de l'aménagement hydroélectrique de Bedous sur le gave d'Aspe étudiés par la technique de marquage-recapture et par radiotélémétrie

    OpenAIRE

    CHANSEAU M.; LARINIER M.; TRAVADE F.

    1999-01-01

    Deux expérimentations ont été conduites en 1995 et 1998 au niveau de la prise d'eau de l'aménagement hydroélectrique de Bedous sur le Gave d'Aspe afin de tester l'efficacité d'un exutoire de dévalaison pour smolts de saumon atlantique (Salmo salar L.). Le dispositif de dévalaison est situé en rive droite à proximité immédiate du plan des grilles. Le débit moyen alimentant l'exutoire a varié au cours de l'étude de 0,4 m3/s à 1,2 m3/s ce qui correspond à 1,6 % à 4,3 % du débit turbiné. Lefficac...

  6. L’éducation à la gestion des risques naturels dans le manuel de géographie de la 1ère année secondaire en Tunisie : analyse didactique et propositions

    OpenAIRE

    Harzalli, Fadhel

    2016-01-01

    L’introduction de l’éducation à la gestion des risques naturels dans les programmes et les manuels est récente dans l’enseignement de la géographie en Tunisie. En effet, l’éducation à la gestion des risques peut être considérée comme un champ éducatif émergeant et un ensemble d’interventions qui vise à informer, motiver et aider les apprenants à adopter volontairement des comportements favorables à la vie, et à se construire une opinion raisonnée sur des questions vives où l’intime et le soci...

  7. Les déterminants de l’intention entrepreneuriale des jeunes diplômés

    Directory of Open Access Journals (Sweden)

    Ali Maâlej

    2013-11-01

    Full Text Available En nous inspirant du modèle psychosocial du comportement planifié d’Ajzen, nous avons expliqué l’intention entrepreneuriale à travers les caractéristiques individuelles et le milieu environnant. Nous avons envisagé de jeter la lumière sur un échantillon de diplômés issus de l’école supérieure de commerce de Sfax. Nos résultats révèlent l’importance des attitudes associées au comportement ainsi que l’importance des normes sociales dans l’intention entrepreneuriale. À contrario, les contraintes financières, la formation en création d’entreprise et tout ce qui se rapporte aux perceptions du contrôle comportemental sont d’un effet non significatif sur l’intention.

  8. 1981 Annual Status Report. Plutonium fuels and actinide programme

    International Nuclear Information System (INIS)

    1981-01-01

    In this 1981 report the work carried out by the European Institute for Transuranium elements is reviewed. Main topics are: operation limits of plutonium fuels: swelling of advanced fuels, oxide fuel transients, equation of state of nuclear materials; actinide cycle safety: formation of actinides (FACT), safe handling of plutonium fuel (SHAPE), aspects of the head-end processing of carbide fuel (RECARB); actinide research: crystal chemistry, solid state studies, applied actinide research

  9. Ultratrace analysis of transuranic actinides by laser-induced fluorescence

    Science.gov (United States)

    Miller, S.M.

    1983-10-31

    Ultratrace quantities of transuranic actinides are detected indirectly by their effect on the fluorescent emissions of a preselected fluorescent species. Transuranic actinides in a sample are coprecipitated with a host lattice material containing at least one preselected fluorescent species. The actinide either quenches or enhances the laser-induced fluorescence of the preselected fluorescent species. The degree of enhancement or quenching is quantitatively related to the concentration of actinide in the sample.

  10. Electronic sorting of radioactive ores; Triage electronique des minerais radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Sandier, J.

    1958-01-15

    Electronic sorting of radioactive ores consists in passing the rock lumps, after sieving, one by one in front of radioactivity detectors; these detectors command electromechanical systems which class the ores according to their radioactivity level. This note sets on the state of progress of the work going on at the D.R.E.M.: use of scintillometers for γ-ray detection, with circuits carrying magnetic memories to improve their operation; results of laboratory and semi-industrial tests on several deposits; description of the material, data on the first factory project; notes on the financial returns of the process. A description is also given of the electronic sorting material used skip by skip for a first rough classification of the ores according to their content, as they leave the shaft. (author) [French] Le triage electronique des minerais radioactifs consiste a faire passer, apres criblage, les cailloux un par un devant des detecteurs de radioactivite; ces detecteurs commandent des systemes electromecaniques qui classent les minerais selon leur niveau de radioactivite. La note expose l'etat d'avancement des travaux en cours a la D.R.E.M: utilisation des scintillometres pour la detection des rayonnements γ, de circuits comportant des memoires magnetiques pour ameliorer le fonctionnement; resultats d'essais de laboratoire et semi-industriels sur plusieurs gisements; description du materiel, donnees sur le premier projet d'usine; notes sur la rentabilite du procede. Est egalement decrit le materiel de triage electronique skip par skip utilise pour une premiere classification grossiere des minerais selon leurs teneurs, des la sortie des puits. (auteur)

  11. Special actinide nuclides: Fuel or waste?

    International Nuclear Information System (INIS)

    Srinivasan, M.; Rao, K.S.; Dingankar, M.V.

    1989-01-01

    The special actinide nuclides such as Np, Cm, etc. which are produced as byproducts during the operation of fission reactors are presently looked upon as 'nuclear waste' and are proposed to be disposed of as part of high level waste in deep geological repositories. The potential hazard posed to future generations over periods of thousands of years by these long lived nuclides has been a persistent source of concern to critics of nuclear power. However, the authors have recently shown that each and every one of the special actinide nuclides is a better nuclear fuel than the isotopes of plutonium. This finding suggests that one does not have to resort to exotic neutron sources for transmuting/incinerating them as proposed by some researchers. Recovery of the special actinide elements from the waste stream and recycling them back into conventional fission reactors would eliminate one of the stigmas attached to nuclear energy

  12. Interaction of actinides with natural microporous materials

    International Nuclear Information System (INIS)

    Misaelides, P.; Godelirsas, A.

    1998-01-01

    The existing studies mainly concern the sorption of thorium, uranium, neptunium, plutonium and americium from aqueous media by clay minerals and zeolites as well as the determination of the corresponding chemical processes taking place at the mineral-water interface. The investigation techniques applied for this purpose include, except the conventional wet-chemical and radiochemical methods, advanced spectroscopic methods such as extended X-ray absorption fine structure spectroscopy (EXAFS), Rutherford Backscattered Spectroscopy (RBS), X-ray photoelectron spectroscopy (XPS) and Raman Spectroscopy. These techniques significantly contribute to the characterization of the reacted mineral waters and to the explanation of the structural and compositional characteristics of the sorbed actinide species. Theoretical models regarding the aqueous chemistry and speciation of the actinides have also been developed aiming the elucidation of the complex actinide sorption mechanisms. This contribution will critically review of the existing literature, present recently obtained unpublished results and discuss the necessity of future work in the field. (authors)

  13. Actinide distribution in the human skeleton

    International Nuclear Information System (INIS)

    Kathren, R.L.; McInroy, J.F.; Swint, M.J.

    1985-05-01

    Radiochemical analysis of two half skeletons donated to the United States Transuranium Registry, one from an individual with an occupationally incurred deposition of 241 Am and the other with a deposition of 239 Pu, revealed an inverse linear relationship between the concentration of actinide in the bone ash and the fraction of ash. Two distinct relationships were noted, one for the cranium and the other for the remainder of the skeleton. The results suggest that the actinide content of the skeleton as a whole, Q, can be obtained with an uncertainty of +-50% from analysis of a single sample of any bone (except the cranium) by Q = [(830 C/sub sample/)/(0.61 - f/sub sample/)], in which C/sub sample/ refers to the actinide content per g of ash and f/sub sample/ the fraction of ash (i.e., ratio of dry to wet weight) in the sample. 5 figs., 3 tabs

  14. Neutron scattering studies of the actinides

    International Nuclear Information System (INIS)

    Lander, G.H.

    1979-01-01

    The electronic structure of actinide materials presents a unique example of the interplay between localized and band electrons. Together with a variety of other techniques, especially magnetization and the Mossbauer effect, neutron studies have helped us to understand the systematics of many actinide compounds that order magnetically. A direct consequence of the localization of 5f electrons is the spin-orbit coupling and subsequent spin-lattice interaction that often leads to strongly anisotropic behavior. The unusual phase transition in UO 2 , for example, arises from interactions between quadrupole moments. On the other hand, in the monopnictides and monochalcogenides, the anisotropy is more difficult to understand, but probably involves an interaction between actinide and anion wave functions. A variety of neutron experiments, including form-factor studies, critical scattering and measurements of the elementary excitations have now been performed, and the conceptual picture emerging from these studies will be discussed

  15. Monazite as a suitable actinide waste form

    Energy Technology Data Exchange (ETDEWEB)

    Schlenz, Hartmut; Heuser, Julia; Schmitz, Stephan; Bosbach, Dirk [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Energie und Klimaforschung (IEK), Nukleare Entsorgung und Reaktorsicherheit (IEK-6); Neumann, Andreas [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Energie und Klimaforschung (IEK), Nukleare Entsorgung und Reaktorsicherheit (IEK-6); RWTH Aachen Univ. (Germany). Inst. for Crystallography

    2013-03-01

    The conditioning of radioactive waste from nuclear power plants and in some countries even of weapons plutonium is an important issue for science and society. Therefore the research on appropriate matrices for the immobilization of fission products and actinides is of great interest. Beyond the widely used borosilicate glasses, ceramics are promising materials for the conditioning of actinides like U, Np, Pu, Am, and Cm. Monazite-type ceramics with general composition LnPO{sub 4} (Ln = La to Gd) and solid solutions of monazite with cheralite or huttonite represent important materials in this field. Monazite appears to be a promising candidate material, especially because of its outstanding properties regarding radiation resistance and chemical durability. This article summarizes the most recent results concerning the characterization of monazite and respective solid solutions and the study of their chemical, thermal, physical and structural properties. The aim is to demonstrate the suitability of monazite as a secure and reliable waste form for actinides. (orig.)

  16. Actinide separations by supported liquid membranes

    International Nuclear Information System (INIS)

    Danesi, P.R.; Horwitz, E.P.; Rickert, P.; Chiarizia, R.

    1984-01-01

    The work has demonstrated that actinide removal from synthetic waste solutions using both flat-sheet and hollow-fiber SLM's is a feasible chemical process at the laboratory scale level. The process is characterized by the typical features of SLM's processes: very small quantities of extractant required; the potential for operations with high feed/strip volume ratios, resulting in a corresponding concentration factor of the actinides; and simplicity of operation. Major obstacles to the implementation of the SLM technology to the decontamination of liquid nuclear wastes are the probable low resistance of polypropylene supports to high radiation fields, which may prevent the application to high-level nuclear wastes; the unknown lifetime of the SLM; and the high Na content of the separated actinide solution

  17. Research on Actinides in Nuclear Fuel Cycles

    International Nuclear Information System (INIS)

    Song, Kyu Seok; Park, Yong Joon; Cho, Young Hwan

    2010-04-01

    The electrochemical/spectroscopic integrated measurement system was designed and set up for spectro-electrochemical measurements of lanthanide and actinide ions in high temperature molten salt media. A compact electrochemical cell and electrode system was also developed for the minimization of reactants, and consequently minimization of radioactive waste generation. By applying these equipment, oxidation and reduction behavior of lanthanide and actinide ions in molten salt media have been made. Also, thermodynamic parameter values are determined by interpreting the results obtained from electrochemical measurements. Several lanthanide ions exhibited fluorescence properties in molten salt. Also, UV-VIS measurement provided the detailed information regarding the oxidation states of lanthanide and actinide ions in high temperature molten salt media

  18. Research on Actinides in Nuclear Fuel Cycles

    Energy Technology Data Exchange (ETDEWEB)

    Song, Kyu Seok; Park, Yong Joon; Cho, Young Hwan

    2010-04-15

    The electrochemical/spectroscopic integrated measurement system was designed and set up for spectro-electrochemical measurements of lanthanide and actinide ions in high temperature molten salt media. A compact electrochemical cell and electrode system was also developed for the minimization of reactants, and consequently minimization of radioactive waste generation. By applying these equipment, oxidation and reduction behavior of lanthanide and actinide ions in molten salt media have been made. Also, thermodynamic parameter values are determined by interpreting the results obtained from electrochemical measurements. Several lanthanide ions exhibited fluorescence properties in molten salt. Also, UV-VIS measurement provided the detailed information regarding the oxidation states of lanthanide and actinide ions in high temperature molten salt media

  19. Ground-state electronic structure of actinide monocarbides and mononitrides

    DEFF Research Database (Denmark)

    Petit, Leon; Svane, Axel; Szotek, Z.

    2009-01-01

    The self-interaction corrected local spin-density approximation is used to investigate the ground-state valency configuration of the actinide ions in the actinide monocarbides, AC (A=U,Np,Pu,Am,Cm), and the actinide mononitrides, AN. The electronic structure is characterized by a gradually increa...

  20. Sequential analysis of selected actinides in urine

    International Nuclear Information System (INIS)

    Kramer, G.H.

    1980-07-01

    The monitoring of personnel by urinalysis for suspected contamination by actinides necessitated the development and implementation of an analytical scheme that will separate and identify alpha emitting radionuclides of these elements. The present work deals with Pu, Am, and Th. These elements are separated from an ashed urine sample by means of coprecipitation and ion exchange techniques. The final analysis is carried out by electroplating the actinides and counting in a α-spectrometer. Mean recoveries of these elements from urine are: Pu 64%, Am 74% and Th 69%. (auth)

  1. Aqueous actinide complexes: A thermochemical assessment

    International Nuclear Information System (INIS)

    Fuger, J.; Khodakovsky, I.L.; Medvedev, V.A.; Navratil, J.D.

    1979-01-01

    The scope and purpose of an assessment of the thermodynamic properties of the aqueous actinide complexes are presented. This work which, at present, is limited to inorganic ligands and three selected organic ligands (formate, acetate and oxalate), is part of an effort established by the International Atomic Energy Agency to assess the thermodynamic properties of the actinides and their compounds. The problems involved in this work are illustrated by discussing the present status of the assessment as related to a few complex species, (hydroxyl-, fluoride-, carbonate complexes). (orig.) [de

  2. Actinide elements in aquatic and terrestrial environments

    International Nuclear Information System (INIS)

    Bondietti, E.A.; Bogle, M.A.; Brantley, J.N.

    1979-01-01

    Progress is reported on the following research projects: water-sediment interactions of U, Pu, Am, and Cm; relative availability of actinide elements from abiotic to aquatic biota; comparative uptake of transuranic elements by biota bordering Pond 3513; metabolic reduction of 239 Np from Np(V) to Np(IV) in cotton rats; evaluation of hazards associated with transuranium releases to the biosphere; predicting Pu in bone; adsorption--solubility--complexation phenomena in actinide partitioning between sorbents and solution; comparative soil extraction data; and comparative plant uptake data

  3. Hydrothermal processing of actinide contaminated organic wastes

    International Nuclear Information System (INIS)

    Worl, A.; Buelow, S.J.; Le, L.A.; Padilla, D.D.; Roberts, J.H.

    1997-01-01

    Hydrothermal oxidation is an innovative process for the destruction of organic wastes, that occurs above the critical temperature and pressure of water. The process provides high destruction and removal efficiencies for a wide variety of organic and hazardous substances. For aqueous/organic mixtures, organic materials, and pure organic liquids hydrothermal processing removes most of the organic and nitrate components (>99.999%) and facilitates the collection and separation of the actinides. We have designed, built and tested a hydrothermal processing unit for the removal of the organic and hazardous substances from actinide contaminated liquids and solids. Here we present results for the organic generated at the Los Alamos National Laboratory Plutonium Facility

  4. Actinide phosphonate complexes in aqueous solutions

    International Nuclear Information System (INIS)

    Nash, K.L.

    1993-01-01

    Complexes formed by actinides with carboxylic acids, polycarboxylic acids, and aminopolycarboxylic acids play a central role in both the basic and process chemistry of the actinides. Recent studies of f-element complexes with phosphonic acid ligands indicate that new ligands incorporating doubly ionizable phosphonate groups (-PO 3 H 2 ) have many properties which are unique chemically, and promise more efficient separation processes for waste cleanup and environmental restoration. Simple diphosphonate ligands form much stronger complexes than isostructural carboxylates, often exhibiting higher solubility as well. In this manuscript recent studies of the thermodynamics and kinetics of f-element complexation by 1,1 and 1,2 diphosphonic acid ligands are described

  5. A worldwide perspective on actinide burning

    International Nuclear Information System (INIS)

    Burch, W.D.

    1991-01-01

    Worldwide interest has been evident over the past few years in reexamining the merits of recovering the actinides from spent light-water reactor (LWR) fuel and transmuting them in fast reactors to reduce hazards in geologic repositories. This paper will summarize some of the recent activities in this field. Several countries are embarked on programs of reprocessing and vitrification of present wastes, from which removal of the actinides is largely precluded. The United States is assessing the ideas related to the fast reactor program and the potential application to defense wastes. 18 refs., 2 figs

  6. Molecular dynamics studies of actinide nitrides

    International Nuclear Information System (INIS)

    Kurosaki, Ken; Uno, Masayoshi; Yamanaka, Shinsuke; Minato, Kazuo

    2004-01-01

    The molecular dynamics (MD) calculation was performed for actinide nitrides (UN, NpN, and PuN) in the temperature range from 300 to 2800 K to evaluate the physical properties viz., the lattice parameter, thermal expansion coefficient, compressibility, and heat capacity. The Morse-type potential function added to the Busing-Ida type potential was employed for the ionic interactions. The interatomic potential parameters were determined by fitting to the experimental data of the lattice parameter. The usefulness and applicability of the MD method to evaluate the physical properties of actinide nitrides were studied. (author)

  7. Actinide and fission product separation and transmutation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-07-01

    The second international information exchange meeting on actinide and fission product separation and transmutation, took place in Argonne National Laboratory in Illinois United States, on 11-13 November 1992. The proceedings are presented in four sessions: Current strategic system of actinide and fission product separation and transmutation, progress in R and D on partitioning processes wet and dry, progress in R and D on transmutation and refinements of neutronic and other data, development of the fuel cycle processes fuel types and targets. (A.L.B.)

  8. Static and dynamic deformations of actinide nuclei

    International Nuclear Information System (INIS)

    Rozmej, P.

    1985-09-01

    The zero-point quadrupole-hexadecapole vibrations have been taken into account to calculate dynamical deformations for even-even actinide nuclei. The collective and intrinsic motions are separated according to the Born-Oppenheimer approximation. The collective Hamiltonian is constructed using the macroscopic-microscopic method in the potential energy part and the cranking model in the kinetic energy part. The BCS theory with a modified oscillator potential is applied to describe the intrinsic motion of nucleons. A new set of Nilsson potential parameters, which produces a much better description of the properties of light actinide nuclei, has also been found. (orig.)

  9. Spin–orbit coupling in actinide cations

    DEFF Research Database (Denmark)

    Bagus, Paul S.; Ilton, Eugene S.; Martin, Richard L.

    2012-01-01

    The limiting case of Russell–Saunders coupling, which leads to a maximum spin alignment for the open shell electrons, usually explains the properties of high spin ionic crystals with transition metals. For actinide compounds, the spin–orbit splitting is large enough to cause a significantly reduced...... spin alignment. Novel concepts are used to explain the dependence of the spin alignment on the 5f shell occupation. We present evidence that the XPS of ionic actinide materials may provide direct information about the angular momentum coupling within the 5f shell....

  10. Développement de la pupillométrie pour la mesure objective des émotions dans le contexte de la consommation alimentaire

    OpenAIRE

    Lemercier, Anaïs

    2014-01-01

    Les perceptions sensorielles et hédoniques résultent de processus complexes d’intégration, qui ne sont pas seulement rationnels, mais aussi fondés sur des sentiments, des émotions et des souvenirs. Afin d'appréhender au mieux le comportement du consommateur, il est devenu indispensable de mesurer les émotions afin de comprendre leur rôle fondamental dans la prise de décision. En science du consommateur, les émotions sont principalement mesurées par questionnaire. Malheureusement, cette mesure...

  11. Comportement du béton à l'eau de mer. Synthèse bibliographique Concrete Behavior in Marine Environment. a Review Paper

    Directory of Open Access Journals (Sweden)

    Lesage J.

    2006-11-01

    Full Text Available Depuis quelques années, dans l'élaboration de structures destinées à l'exploration et à l'exploitation des hydrocarbures en mer, le choix se porte parfois sur les structures en béton plutôt que sur les structures en acier, en particulier dans les zones difficiles de la mer du Nord. C'est pourquoi il nous a semblé intéressant de faire le point des connaissances actuelles sur le comportement du béton à l'eau de mer. Les problèmes les plus importants se situent au niveau de la zone de marnage, c'est-à-dire la zone où le béton est alternativement immergé. Ils sont de tous ordres : contraintes mécaniques avec érosion et cavitation, action capillaire de l'eau avec alternance d'humidification et de séchage, action du gel et du dégel. Les moyens de lutte ne manquent pas : constructions massives, voire surdimensionnées, résistant au choc, choix des formes, mise en aeuvre soignée d'un béton de qualité riche en ciment, correctement dosé en agrégats, dur, dense, compact, imperméable; introduction dans le béton d'un entraineur d'air pour diminuer les effets du gel. L'utilisation d'un ciment prise mer et le choix d'un rapport eau/ciment voisin de 0,45 sont hautement recommandés. Quant à la corrosion, elle concerne les structures en béton à tous les niveaux, aussi bien dans la zone immergée en continu que dans la zone alternativement immergée. L'attaque du béton par les sulfates contenus dans l'eau de mer conduit à la formation de sels de Candlot qui provoquent une dégradation du béton. Le remède consiste à limiter la teneur en aluminate tricalcique du ciment. L'attaque des aciers de renfort par les chlorures a fait l'objet de nombreuses études: la solution consiste surtout à protéger les aciers par galvanisation ou protection cathodique. D'une manière générale, le béton placé dans ce milieu agressif que constitue l'eau de mer subit des contraintes mécaniques et physicochimiques importantes, mais on sait en g

  12. Transmutation of waste actinides in light water reactors

    International Nuclear Information System (INIS)

    Gorrell, T.C.

    1979-04-01

    Actinide recycle and transmutation calculations were made for three irradiation options of a light water reactor (LWR). The cases considered were: all actinides recycled in regular uranium fuel assemblies; transuranic actinides recycled in separate MOX assemblies with 235 U enrichment of uranium; and transuranic actinides recycled in separate MOX assemblies with plutonium enrichment of natural uranium. When all actinides were recycled in a uniform lattice, the transuranic inventory after ten recycles was 38% of the inventory accumulated without recycle. When the transuranics from two regular uranium assemblies were combined with those recycled from a MOX assembly, the transuranic inventory was reduced 50% after five recycles

  13. Chemical compatibility of HLW borosilicate glasses with actinides

    International Nuclear Information System (INIS)

    Walker, C.T.; Scheffler, K.; Riege, U.

    1978-11-01

    During liquid storage of HLLW the formation of actinide enriched sludges is being expected. Also during melting of HLW glasses an increase of top-to-bottom actinide concentrations can take place. Both effects have been studied. Besides, the vitrification of plutonium enriched wastes from Pu fuel element fabrication plants has been investigated with respect to an isolated vitrification process or a combined one with the HLLW. It is shown that the solidification of actinides from HLLW and actinide waste concentrates will set no principal problems. The leaching of actinides has been measured in salt brine at 23 0 C and 115 0 C. (orig.) [de

  14. Actinide recycle in LMFBRs as a waste management alternative

    International Nuclear Information System (INIS)

    Beaman, S.L.

    1979-01-01

    A strategy of actinide burnup in fast reactor systems has been investigated as an approach for reducing the long term hazards and storage requirements of the actinide waste elements and their decay daughters. The actinide recycle studies also included plutonium burnup studies in the event that plutonium is no longer required as a fuel. Particular emphasis was placed upon the timing of the recycle program, the requirements for separability of the waste materials, and the impact of the actinides on the reactor operations and performance. It is concluded that actinide recycle and plutonium burnout are attractive alternative waste management concepts. 25 refs., 14 figs., 34 tabs

  15. Transmutation of LWR waste actinides in thermal reactors

    International Nuclear Information System (INIS)

    Gorrell, T.C.

    1979-01-01

    Recycle of actinides to a reactor for transmutation to fission products is being considered as a possible means of waste disposal. Actinide transmutation calculations were made for two irradiation options in a thermal (LWR) reactor. The cases considered were: all actinides recycled in regular uranium fuel assemblies, and transuranic actinides recycled in separate mixed oxide (MOX) assemblies. When all actinides were recycled in a uranium lattice, a reduction of 62% in the transuranic inventory was achieved after 10 recycles, compared to the inventory accumulated without recycle. When the transuranics from 2 regular uranium assemblies were combined with those recycled from a MOX assembly, the transuranic inventory was reduced 50% after 5 recycles

  16. OGM Diffusion des OGM et impact pour les agriculteurs : quels sont les liens ?

    Directory of Open Access Journals (Sweden)

    Lemarie Stéphane

    2001-05-01

    Full Text Available Les OGM actuellement sur le marché présentent des innovations sur des fonctions de protection des plantes. Selon les problèmes de protection des plantes, les gains des agriculteurs liés à l’adoption des OGM sont très variables. Cette hétérogénéité pose d’importants problèmes méthodologiques pour pouvoir estimer correctement la distribution des gains pour l’ensemble des agriculteurs. Une synthèse de plusieurs études américaines est réalisée ici et met bien en évidence la diversité des méthodes utilisées, chacune d’elles présentant ses avantages et ses limites. Globalement, si la diffusion des OGM est un fait indéniable, les études ne permettent pas de tirer des conclusions aussi nettes quant à l’impact des OGM pour tous les agriculteurs qui adoptent ces produits, et cela en particulier pour le soja. Cette absence de conclusion s’explique en grande partie par la difficulté à mesurer certains facteurs qui influencent le comportement d’adoption, comme par exemple la simplification de la conduite des cultures. En contrepartie, il faut noter que les études présentées ici ne prennent pas en compte un certain nombre d’effets indirects qui peuvent faire diminuer les gains des agriculteurs.

  17. Irradiation Behaviour of Uranium Carbide Fuels; Comportement des carbures d'uranium sous l’effet de l'irradiation; ПОВЕДЕНИЕ УРАНО-КАРБИДНОГО ТОПЛИВА ПРИ ОБЛУЧЕНИИ; Comportamiento de los combustibles de carburo de uranio frente a la irradiación

    Energy Technology Data Exchange (ETDEWEB)

    Sinizer, D. I.; Webb, B. A.; Berger, S. [Atomics International, Canoga Park, CA (United States)

    1963-08-15

    is a void-free, single-phase microstructure in the decarburized region of the originally hyperstoichiometric fuel. No carbon transfer is observed with hypo- stoichiometric U-C. Carbon removed from hyperstoichiometric (J-C fuel is readily transferred across the Na bond to carburize stainless-steel cladding in both in-pile and out-of-pile experiments. This transfer represents a possible limitation of choice of fuel composition for Na-bonded stainless-steel-clad elements. Nevertheless, available data lead to the present conclusions that stoichiometric or hyperstoichiometric U-C Na-bonded to stainless steel can be effectively used in Na-cooled power reactors. Fission-gas release or fuel swelling do not represent limitations under presently conceived Na-cooled reactor conditions. Alternative cladding materials such as Cb alloys or gas-bonded fuel elements may be required for ultra-high-temperature applications. (author) [French] Des combustibles UC ayant uùe composition quasi stoechiométrique, obtenus par fusion à l’arc électrique et enfermés dans des gaines en acier inoxydable avec lien de sodium ou de NaK, ont été irradiés à des températures au centre allant jusqu'à 1950°F (1065°C) [température moyenne: 1750°F (950°C)] et des taux de combustion allant jusqu'à 25 000 MWj/t d'U, Les combustibles stoechiométriques et légèrement tiyperstoechiométriques accusent une augmentation à peu près linéaire du diamètre pour des taux de combustion allam jusqu'à 25 000 MWj/t d'U. Pour une température au centre moyenne de 1500°F (815°C), l'augmentation de diamètre est inférieure à 3% au-dessus de 25 000 MWj/t d’U; elle est proportionnellement moindre losque la température du combustible s'abaisse. A la température moyenne de 1000°F (540°C), on observe une dilatation qui est à peu près égal à celle que l'on peut prévoir du fait de l'accumulation des produits de fission. La libération des gaz de fission est estimée à moins de 1% au-dessus de

  18. Intégration des matériaux en terre cuite dans la valorisation des sédiments marins

    Directory of Open Access Journals (Sweden)

    Frar Ikram

    2014-04-01

    Full Text Available L’objectif de ce travail est de valoriser les sédiments de dragage portuaire non traités des ports de Tanger et de Larache dans des matériaux de construction en terre cuite et plus précisément dans les briques. Une caractérisation complète des sédiments de dragage des ports de Tanger et de Larache a été réalisée à partir d’analyses chimiques, physiques, minéralogiques et environnementales. On a noté l’absence de pollution métallique. La suite de l’étude a consisté à élaborer des échantillons de briques à base de sédiments à l’échelle du laboratoire. Le taux de substitution optimum d’argile entrant dans la formulation des briques par les sédiments a été évalué à l’aide d’essais mécaniques. Les paramètres tels que la surface spécifique des mélanges, la porosité, l’absorption d’eau et la masse volumique apparente influençant le comportement des briques ont été déterminés.

  19. Heterogeneous all actinide recycling in LWR all actinide cycle closure concept

    International Nuclear Information System (INIS)

    Tondinelli, Luciano

    1980-01-01

    A project for the elimination of transuranium elements (Waste Actinides, WA) by neutron transmutation is developed in a commercial BWR with U-Pu (Fuel Actinides, FA) recycle. The project is based on the All Actinide Cycle Closure concept: 1) closure of the 'back end' of the fuel cycle, U-Pu coprocessing, 2) waste actinide disposal by neutron transmutation. The reactor core consists of Pu-island fuel assemblies containing WAs in target pins. Two parallel reprocessing lines for FAs and WAs are provided. Mass balance, hazard measure, spontaneous activity during 10 recycles are calculated. Conclusions are: the reduction in All Actinide inventory achieved by Heterogeneous All Actinide Recycling is on the order of 83% after 10 recycles. The U235 enrichment needed for a constant end of cycle reactivity decreases for increasing number of recycles after the 4th recycle. A diffusion-burnup calculation of the pin power peak factors in the fuel assembly shows that design limits can be satisfied. A strong effort should be devoted to the solution of the problems related to high values of spontaneous emission by the target pins

  20. Calculated investigation of actinide transmutation in the BOR-60 reactor

    International Nuclear Information System (INIS)

    Zhemkov, I.Yu.; Ishunina, O.V.; Yakovleva, I.V.

    2000-01-01

    One of the prospective actinide burner reactor type is the fast reactor with a 'hard' spectrum and small breeding factor, which is the BOR-60. The calculated investigations demonstrate that Loading up to 40% of minor-actinides to the BOR-60 reactor did not lead to the considerable change of neutron-physical characteristics. The performed calculations show that the BOR- 60 reactor possesses a high efficiency of the minor-actinide and plutonium bum-up (up to 37 kg/(TW · h)) hat is comparable with properties of the actinide burner-reactors under design. The BOR-60 reactor can provide a homogeneous minor-actinide Loading (minor-actinide addition to the standard fuel) to the core and heterogeneous Loading (as separate assemblies-targets with a high minor-actinide fraction) to the first rows of a radial blanket that allows the optimum usage of the reactor and its characteristics. (authors)

  1. ENDF/B-5 Actinides (Rev. 86)

    International Nuclear Information System (INIS)

    Lemmel, H.D.

    1986-05-01

    This document summarizes the contents of the Actinides part of the ENDF/B-5 nuclear data library released by the US National Nuclear Data Center. This library or selective retrievals of it, are available costfree from the IAEA Nuclear Data Section upon request. The present version of the library is the Revision of 1986. (author). Refs, figs and tabs

  2. Trends in actinide processing at Hanford

    International Nuclear Information System (INIS)

    Harmon, H.D.

    1993-09-01

    In 1989, the mission at the Hanford Site began a dramatic and sometimes painful transition. The days of production--as we used to know it--are over. Our mission officially has become waste management and environmental cleanup. This mission change didn't eliminate many jobs--in fact, budgets have grown dramatically to support the new mission. Most all of the same skilled crafts, engineers, and scientists are still required for the new mission. This change has not eliminated the need for actinide processing, but it has certainly changed the focus that our actinide chemists and process engineers have. The focus used to be on such things as increasing capacity, improving separations efficiency, and product purity. Minimizing waste had become a more important theme in recent years and it is still a very important concept in the waste management and environmental cleanup arena. However, at Hanford, a new set of words dominates the actinide process scene as we work to deal with actinides that still reside in a variety of forms at the Hanford Site. These words are repackage, stabilize, remove, store and dispose. Some key activities in each of these areas are described in this report

  3. Report of the panel on inhaled actinides

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    Some topics discussed are as follows: assessment of risks to man of inhaling actinides; use of estimates for developing protection standards; epidemiology of lung cancer in exposed human populations; development of respiratory tract models; and effects in animals: dose- and effect-modifying factors

  4. Actinide and fission product partitioning and transmutation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The third international information exchange meeting on actinide and fission product partitioning and transmutation, took place in Cadarache France, on 12-14 December 1994. The proceedings are presented in six sessions : an introduction session, the major programmes and international cooperation, the systems studies, the reactors fuels and targets, the chemistry and a last discussions session. (A.L.B.)

  5. Placental transfer of plutonium and other actinides

    International Nuclear Information System (INIS)

    Griessl, I.; Stieve, F.E.

    1988-10-01

    The report is based on an extensive literature search. All data available from studies on placental transfer of plutonium and other actinides in man and animals have been collected and analysed, and the report presents the significant results as well as unresolved questions and knowledge gaps which may serve as a waypost to future research work. (orig./MG) [de

  6. Partitioning and Transmutation of minor actinides

    International Nuclear Information System (INIS)

    Koch, L.; Wellum, R.

    1991-01-01

    The partitioning of minor actinides from spent fuels and their transmutation into short-lived fission products has been the topic of two dedicated meetings organized jointly by the European Commission and the OECD. The conclusion of the last meeting in 1980, in short, was that partitioning and transmutation of minor actinides, especially in fast reactors, seemed possible. However, the incentive, which would be a reduction of the radiological hazard to the public, was too small if long-lived fission products were not included. Furthermore this meeting showed that minor actinide targets or possible nuclear fuels containing minor actinides for transmutation had not yet been developed. The European Institute for Transuranium Elements took up this task and has carried it out as a small activity for several years. Interests expressed recently by an expert meeting of the OECD/NEA (Paris, 25 April 1989), which was initiated by the proposed Japanese project Omega, led us to the conclusion that the present state of knowledge should be looked at in a workshop environment. Since the Japanese proposal within the project Omega is based on a broader approach we needed this evaluation to assess the relevance of our present activity and wanted to identifiy additional studies which might be needed to cover possible future demands from the public. This workshop was therefore organized, and participants active in the field from EC countries, the USA and Japan were invited

  7. Supercritical fluid carbon dioxide extraction of actinides

    International Nuclear Information System (INIS)

    Rao, Ankita; Tomar, B.S.

    2016-01-01

    Supercritical fluid extraction (SFE) is a process akin to liquid-liquid or solvent extraction where a Supercritical fluid (SCF) is contacted with a solid/ liquid matrix for the purpose of separating the component of interest from the original matrix. Carbon dioxide is a preferred choice as supercritical fluid (SCF) owing to its moderate critical parameter (P c = 7.38 MPa and T c = 304.1K) coupled with radiation and chemical stability, non toxic nature and low cost. Despite widespread applications for extraction of organic compounds and associated advantages especially liquid waste minimization, the SFE of metal ions was left unexplored for quite some time, as direct metal ion extraction is inefficient due charge neutralization requirement and weak solute-solvent interaction. Neutral SCF soluble metal-ligand complexation is imperative and SFE of actinides was reported only in 1994. Several studies have been carried out on SFE of uranium, thorium and plutonium from nitric acid medium employing different sets of ligands (organophosphorus, diketones, amides). Especially attractive is the possibility of direct dissolution and extraction of actinides employing ligand-acid adducts (like TBP.HNO 3 adduct) from solid matrices of different stages of nuclear fuel cycle viz. ores, spent nuclear fuels and radioactive wastes. Also, partitioning of actinides from fission products has been explored in spent nuclear fuel. These studies on supercritical fluid extraction of actinides indicate a more efficient and environmentally sustainable technology. (author)

  8. ACTINET: a European Network for Actinide Sciences

    International Nuclear Information System (INIS)

    Bernard Boullis; Pascal Chaix

    2006-01-01

    Full text of publication follows: The research in Actinide sciences appear as a strategic issue for the future of nuclear systems. Sustainability issues are clearly in connection with the way actinide elements are managed (either addressing saving natural resource, or decreasing the radiotoxicity of the waste). The recent developments in the field of minor actinide P and T offer convincing indications of what could be possible options, possible future processes for the selective recovery of minor actinides. But they point out, too, some lacks in the basic understanding of key-issues (such as for instance the control An versus Ln selectivity, or solvation phenomena in organic phases). Such lacks could be real obstacles for an optimization of future processes, with new fuel compounds and facing new recycling strategies. This is why a large and sustainable work appears necessary, here in the field of basic actinide separative chemistry. And similar examples could be taken from other aspects of An science, for various applications (nuclear fuel or transmutation targets design, or migration issues,): future developments need a strong, enlarged, scientific basis. The Network ACTINET, established with the support of the European Commission, has the following objectives: - significantly improve the accessibility of the major actinide facilities to the European scientific community, and form a set of pooled facilities, as the corner-stone of a progressive integration process, - improve mobility between the member organisations, in particular between Academic Institutions and National Laboratories holding the pooled facilities, - merge part of the research programs conducted by the member institutions, and optimise the research programs and infrastructure policy via joint management procedures, - strengthen European excellence through a selection process of joint proposals, and reduce the fragmentation of the community by putting critical mass of resources and expertise on

  9. European Europart integrated project on actinide partitioning

    International Nuclear Information System (INIS)

    Madic, C.; Hudson, M.J.

    2005-01-01

    This poster presents the objectives of EUROPART, a scientific integrated project between 24 European partners, mostly funded by the European Community within the FP6. EUROPART aims at developing chemical partitioning processes for the so-called minor actinides (MA) contained in nuclear wastes, i.e. from Am to Cf. In the case of dedicated spent fuels or targets, the actinides to be separated also include U, Pu and Np. The techniques considered for the separation of these radionuclides belong to the fields of hydrometallurgy and pyrometallurgy, as in the previous FP5 programs named PARTNEW and PYROREP. The two main axes of research within EUROPART will be: The partitioning of MA (from Am to Cf) from high burn-up UO x fuels and multi-recycled MOx fuels; the partitioning of the whole actinide family for recycling, as an option for advanced dedicated fuel cycles (and in connection with the studies to be performed in the EUROTRANS integrated project). In hydrometallurgy, the research is organised into five Work Packages (WP). Four WP are dedicated to the study of partitioning methods mainly based on the use of solvent extraction methods, one WP is dedicated to the development of actinide co-conversion methods for fuel or target preparation. The research in pyrometallurgy is organized into four WP, listed hereafter: development of actinide partitioning methods, study of the basic chemistry of trans-curium elements in molten salts, study of the conditioning of the wastes, some system studies. Moreover, a strong management team will be concerned not only with the technical and financial issues arising from EUROPART, but also with information, communication and benefits for Europe. Training and education of young researchers will also pertain to the project. EUROPART has also established collaboration with US DOE and Japanese CRIEPI. (authors)

  10. A new look at actinide recycle

    International Nuclear Information System (INIS)

    Burch, W.D.; Croff, A.G.; Rawlins, J.A.; Schulz, W.W.

    1991-01-01

    This paper will address the justification for reexamination of the value of recovering the minor actinides and certain fission products from spent light-water reactor fuels and describe some of the technical progress that has been made since the major studies of a decade ago. During this time, the US Environmental Protection Agency (EPA) and the Nuclear Regulatory Commission have begun establishing detailed criteria and regulations for geologic repositories. An examination of the hazards of waste disposal relative to the EPA release standards reveals that removal of 99.9% of the actinides (Pu, Am, and Np) reduces these hazards quite close to the EPA standards after 300 years' decay of the strontium and cesium. It may be also useful to remove and separately manage and dispose of certain of the long-lived fission products, such as 99 Tc and 129 I. Much additional work is required to fully assess the appropriate target recoveries as the hazards and risks are more closely examined and as the standards are reworked and refined. The two decades before the projected start of the US repository may present a window of opportunity to introduce several better management practices that act to simplify the repository safety issues. From a technical standpoint, significant progress has been made on recovery of the actinides from aqueous wastes though use of the TRUEX process. Additional work is required to demonstrate the application of the process to spent LWR fuels, but it appears straightforward. In addition, work at the Argonne National Laboratory on the liquid-metal reactor metal fuel cycle shows the relative simplicity of recycle of the actinides in that fast reactor cycle. Much work remains to fully demonstrate that actinides from all secondary waste streams can be removed to the target levels from both the aqueous reprocessing of LWR fuel and the pyro processes for the metal-fueled fast reactor. 9 refs., 2 figs

  11. Synroc tailored waste forms for actinide immobilization

    Energy Technology Data Exchange (ETDEWEB)

    Gregg, Daniel J.; Vance, Eric R. [Australian Nuclear Science and Technology Organisation, Kirrawee (Australia). ANSTOsynroc, Inst. of Materials Engineering

    2017-07-01

    Since the end of the 1970s, Synroc at the Australian Nuclear Science and Technology Organisation (ANSTO) has evolved from a focus on titanate ceramics directed at PUREX waste to a platform waste treatment technology to fabricate tailored glass-ceramic and ceramic waste forms for different types of actinide, high- and intermediate level wastes. The particular emphasis for Synroc is on wastes which are problematic for glass matrices or existing vitrification process technologies. In particular, nuclear wastes containing actinides, notably plutonium, pose a unique set of requirements for a waste form, which Synroc ceramic and glass-ceramic waste forms can be tailored to meet. Key aspects to waste form design include maximising the waste loading, producing a chemically durable product, maintaining flexibility to accommodate waste variations, a proliferation resistance to prevent theft and diversion, and appropriate process technology to produce waste forms that meet requirements for actinide waste streams. Synroc waste forms incorporate the actinides within mineral phases, producing products which are much more durable in water than baseline borosilicate glasses. Further, Synroc waste forms can incorporate neutron absorbers and {sup 238}U which provide criticality control both during processing and whilst within the repository. Synroc waste forms offer proliferation resistance advantages over baseline borosilicate glasses as it is much more difficult to retrieve the actinide and they can reduce the radiation dose to workers compared to borosilicate glasses. Major research and development into Synroc at ANSTO over the past 40 years has included the development of waste forms for excess weapons plutonium immobilization in collaboration with the US and for impure plutonium residues in collaboration with the UK, as examples. With a waste loading of 40-50 wt.%, Synroc would also be considered a strong candidate as an engineered waste form for used nuclear fuel and highly

  12. Éducation alimentaire en milieu populaire: des normes en concurrence

    OpenAIRE

    Lhuissier, Anne

    2010-01-01

    L’article s’intéresse aux modalités de diffusion, à un niveau local, d’une campagne nationale française en matière de prévention de l’obésité. Il met en évidence les difficultés rencontrées par les promoteurs d’un groupe d’éducation nutritionnelle dans leur tentative d’imposer de nouvelles normes en matière de comportement alimentaire. Leurs préceptes se heur­tent aux représentations que les femmes en surpoids se font de leur propre comportement alimentaire et des moyens prescriptifs pour par...

  13. Influence de l\\'addition d\\'inhibiteurs azotés sur le comportement ...

    African Journals Online (AJOL)

    Influence de l\\'addition d\\'inhibiteurs azotés sur le comportement électrochimique et métallurgique de fontes au chrome-nickel (pompes d\\'extraction) en milieu ... en évidence l\\'existence d\\'un film très mince à la surface de la fonte Fa et d\\'une couche épaisse et poreuse de produits de corrosion à la surface de la fonte Fb.

  14. 'You're repulsive': Limits to acceptable drunken comportment for young adults.

    Science.gov (United States)

    MacLean, Sarah; Pennay, Amy; Room, Robin

    2018-03-01

    Researchers have described a 'culture of intoxication' among young people. Yet drunkenness remains a socially risky practice with potential to evoke emotions of irritation and even disgust. We consider intoxicated practices that young adults in Melbourne, Australia, described as distasteful, to identify contemporary cultural forces that constrain intoxication and limit how it is enacted. Interviews were conducted with 60 participants in Melbourne, Australia, each with recent drinking experience. Participants were asked to provide accounts of moments when they regarded their own or others' drunken comportment as unsociable or unpleasant. Transcripts were analysed to identify recurrent themes. Despite amusement when recounting drunken antics, almost everyone in the study identified some discomfort at their own or other's drunkenness. We describe four interacting domains where lines delineating acceptable comportment appear be drawn. The first concerns intoxicated practices. Unpleasant drunken comportment often entailed a sense that the drunk person had disturbed others through an overflow of the self - extruding intimacy, sexuality, violence or bodily fluids. The second domain was gendering, with women vulnerable to being regarded as sexually inappropriate, and men as threatening. Third, the settings where intoxicated behaviour occurred influenced whether intoxicated people risked censure. Finally, the relationships between the drunk person and others, including their respective social positions and drinking patterns, shaped how they were perceived. The capacity of alcohol to render people more open to the world is both sought and reviled. It is important to recognise that there remain limits on acceptable drunken comportment, although these are complex and contingent. These limits are enforced via people's affective responses to drunkenness. This is form of alcohol harm reduction that occurs outside of public health intervention. Thus, cultures that constrain

  15. Etude du comportement de deux variétés de manioc en culture in ...

    African Journals Online (AJOL)

    Les techniques de multiplication peu améliorées du manioc associées aux problèmes de maladies bactériennes et virales participent à la régression de son rendement. Le but de cette étude est d'analyser le comportement de deux variétés de manioc en culture in vitro puis l'impact de cette technique sur la qualité de l'ADN ...

  16. L'interdisciplinarite en sciences sociales pour l'etude du contact des langues (Interdisciplinarity in Social Sciences of the Study of the Relationships of Languages). Proceedings of a Colloquium of the International Center for Research on Bilingualism and the Institute for Interethnic and Intercultural Studies and Research (2nd, Quebec City, Quebec, Canada, October 1-5, 1984).

    Science.gov (United States)

    Prujiner, Alain, Ed.

    Papers given at an international conference applying the social sciences to the study of the relationships of languages include the following: "Reseaux sociaux et comportements langagiers en milieu de contact des langues" ("Social Networks and Language Behaviors in a Language Contact Setting") by M. Blanc and J. Hamers, with…

  17. Mouvements et utilisation de l'habitat en hiver chez un prédateur nomade: le harfang des neiges

    OpenAIRE

    Robillard, Audrey

    2017-01-01

    La migration est un processus écologique permettant aux individus d’exploiter des habitats où les ressources alimentaires et les conditions environnementales fluctuent de façon saisonnière. Certaines espèces présentent une étonnante variabilité et imprévisibilité dans leurs comportements migratoires, notamment les migrateurs facultatifs. L’objectif général de cette thèse est de mieux comprendre l’écologie des espèces migratrices dont les déplacements sont imprévisibles durant la période hiver...

  18. Irradiation behaviour of mixed uranium-plutonium carbides, nitrides and carbonitrides; Comportement a l'irradiation de carbures, nitrures et carbonitrures mixtes d'uranium et de plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Mikailoff, H; Mustelier, J P; Bloch, J; Leclere, J; Hayet, L [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-07-01

    1550MWj/t, mettent en evidence un comportement satisfaisant des trois elements combustibles. (auteurs)

  19. Geochemical behaviour of uranium in the cycle of alteration; Comportement geochimique de l'uranium dans le cycle d'alteration

    Energy Technology Data Exchange (ETDEWEB)

    Chervet, J; Coulomb, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Soudan, P [Centre d' Etude de Lalumine, Compagnie Pechiney (France)

    1958-07-01

    examinons l'influence de la presence de gisements d'uranium sur la composition de ces eaux. d) Nous observons l'amplitude des phenomenes qui limitent les dispersions: fixations, precipitations, etc., et le comportement de la vegetation dans les zones uraniferes. e) Enfin, l'antagonisme: alteration chimique - equilibre radioactif provoque un profond desequilibre dans les materiaux alteres. Nous essayons d'utiliser la mesure de ce desequilibre pour l'explication de mecanismes geochimiques. (auteur)

  20. Method of evaluation of radiant heat transfers for geometries having cast shadows; Methode d`evaluation des echanges radiatifs pour des geometries comportant des ombres portees

    Energy Technology Data Exchange (ETDEWEB)

    Lair, P; Millan, P [ONERA-CERT/DERMES, 31 - Toulouse (France); Dumoulin, J [INSA-UPS, LETHEM, 31 - Toulouse (France)

    1997-12-31

    Experimental studies on aero-thermal characterization of various flows are carried out by the CERT/DERMES centre of the French national office of aerospace studies and research (ONERA). The measurement is based on the infrared thermography method which requires a correction of surface fluxes. This correction is necessarily based on a radiative statement of the cell where the flow takes place. A numerical method of form factors calculation in complex geometrical configuration has been developed. This method is applicable to surfaces (flat or not) and takes into account the shadow phenomena as they can exist inside an experimental test path. Two methods of radiative statements have been developed and compared. The influence of form factors calculation on the radiative statement is also analyzed and the problem of the sensitivity of the methods with respect to possible measurement errors is evoked. (J.S.) 8 refs.

  1. Prevention des Toxicomanies Aupres des Filles avec des Problemes de Comportement: Effets a Court Terme (Prevention of Drug Addiction in Girls with Behavior Problems: Short-Term Effects).

    Science.gov (United States)

    Vitaro, Frank; And Others

    1992-01-01

    This article, written in French, describes and evaluates the first phase of a program to prevent drug addiction among 110 fifth-grade girls with behavior problems in Montreal (Quebec, Canada). Evaluation of the instructional program showed positive results for student knowledge level, attitudes, and behaviors and supported program continuation…

  2. A study of anharmonic al and nonlinear behaviours of vibrations of atomic nuclei; Etude des comportements anharmonioques et non lineaires des vibrations des noyaux atomiques

    Energy Technology Data Exchange (ETDEWEB)

    Volpe, M.C. [Caen Univ., 14 (France)

    1997-12-31

    Double Giant Resonances, vibrational states in which a Giant Resonance is excited on top of another Giant Resonance, have been in the last years the object of many theories and studies. Whereas the measured energies and widths of these states agree with a theoretical predictions, the measured excitation cross sections on the other hand are almost always larger than the calculated ones. The standard theoretical approaches are based both on a harmonic approximation for the collective motion on the nucleus and on its linear response to an external field. In this work the influence of anharmonicities and non-linearities in the external field on the excitation of Double Giant Resonances are studied. First, an oscillator model and an extension of the Lipkin-Meshkow-Glick model are used to study the effects of anharmonicities and non-linearities on the excitation probabilities. The results show that these terms can influence the excitation probability of the second excited state in a significant way. Secondly, these exactly soluble schematic models are used to study some of the approximations made in microscopic calculations based on boson expansion methods and also some aspects on the time-dependent mean field approach. Finally, a microscopic calculation of the Coulomb excitation cross sections of Double Giant Resonances is presented for several nuclei. It is found that, for {sup 208} Pb, the inclusion of anharmonicities and non-linearities and the consideration of many states that play a role in the excitation process give a satisfactory agreement between calculated and observed cross sections. (author). 113 refs.

  3. About the identification of behaviour law parameters of clayey rocks; Sur l'identification des parametres des lois de comportement des roches argileuses

    Energy Technology Data Exchange (ETDEWEB)

    Lecampion, B

    2002-09-15

    This work aims at developing identification methods for clayey rock parameters. These methods are necessary for the interpretation of the numerous data obtained at the ANDRA's Meuse/Haute-Marne underground laboratory. Two main rheological aspects have been considered: the poro-elastic behaviour and the elasto-visco-plastic behaviour. The first part of the study focusses on the poro-elastic parameters. Chapter 2 recalls the direct problem and discusses some important points of the identification inverse problem. Chapter 3 deals with the formulation of gradient calculation techniques for the linear poro-elastic case. The resolution using the finite-element method is discussed. The direct and associated state differentiation methods are validated for a 2D numerical example using the finite-element code Cast3M. The identification of poro-elastic coefficients of the Meuse/Haute-Marne argillaceous rocks is discussed in detail in chapter 4. The use of approximate semi-explicit solutions of the direct problems allows to obtain a fast identification method. The second part deals with the identification of elasto-visco-plastic parameters. The visco-plastic behaviour of Meuse/Haute-Marne rocks is discussed in chapter 5 and a visco-plastic model with nonlinear isotropic cold-drawing is proposed which allows to reproduce the tests. The parameters of this behaviour law are identified on a 1D creep test in drained conditions. Thus, the delayed deformations come from the poro-elastic and visco-plastic behaviour of the rock. It is shown that both phenomena can be separated. All poro-elasto-visco-plastic parameters are identified and a semi-explicit solution of the creep test is used. Chapter 6 presents an identification method of the elasto-visco-plastic parameters for the general case. The identification is equivalent to the minimization of a cost functional. The gradient of the functional is calculated by direct differentiation. The direct differentiation method is developed in Cast3M for the Norton-Hoff elasto-visco-plastic law. The identification of the parameters of this law on 1D and 2D configurations of underground facilities is then presented. Measurements are simulated using a direct calculation, eventually disturbed. The unicity and stability of this identification problem are discussed. In chapter 7, the method is applied to a real case: the Chamoise tunnel. 1D and 2D flat deformation modeling is used to solve the direct problem. The modeling hypotheses are justified and the obtained parameters allow to correctly reproduce the data. (J.S.)

  4. Method of evaluation of radiant heat transfers for geometries having cast shadows; Methode d`evaluation des echanges radiatifs pour des geometries comportant des ombres portees

    Energy Technology Data Exchange (ETDEWEB)

    Lair, P.; Millan, P. [ONERA-CERT/DERMES, 31 - Toulouse (France); Dumoulin, J. [INSA-UPS, LETHEM, 31 - Toulouse (France)

    1996-12-31

    Experimental studies on aero-thermal characterization of various flows are carried out by the CERT/DERMES centre of the French national office of aerospace studies and research (ONERA). The measurement is based on the infrared thermography method which requires a correction of surface fluxes. This correction is necessarily based on a radiative statement of the cell where the flow takes place. A numerical method of form factors calculation in complex geometrical configuration has been developed. This method is applicable to surfaces (flat or not) and takes into account the shadow phenomena as they can exist inside an experimental test path. Two methods of radiative statements have been developed and compared. The influence of form factors calculation on the radiative statement is also analyzed and the problem of the sensitivity of the methods with respect to possible measurement errors is evoked. (J.S.) 8 refs.

  5. Adventures in Actinide Chemistry: A Year of Exploring Uranium and Thorium in Los Alamos

    Energy Technology Data Exchange (ETDEWEB)

    Pagano, Justin [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-01-08

    The first part of this collection of slides is concerned with considerations when working with actinides. The topics discussed in the document as a whole are the following: Actinide chemistry vs. transition metal chemistry--tools we can use; New synthetic methods to obtain actinide hydrides; Actinide metallacycles: synthesis, structure, and properties; and Reactivity of actinide metallacycles.

  6. Etude theorique et experimentale des evaporateurs de dioxyde de carbone operant dans des conditions de givrage

    Science.gov (United States)

    Bendaoud, Adlane Larbi

    Les evaporateurs de refrigeration sont surtout du type tube a ailettes, appeles serpentins, et fonctionnent dans l'une des conditions suivantes: seche, humide ou avec formation de givre. Il a ete demontre que la formation du givre sur la paroi exterieure de l'echangeur engendre une surconsommation energetique a cause des operations de degivrage puisque 15 a 20% seulement de la chaleur produite sert au degivrage tandis que le reste est dissipee dans l'environnement [1]. Avec l'avenement des nouveaux refrigerants, moins nocifs envers l'environnement, l'industrie du froid se trouve penalisee du fait que peu ou pas de composantes mecaniques (compresseur, pompe, echangeur...etc.) adaptees sont disponibles [3]. Il s'agit pour la communaute des frigoristes de combler ce retard technologique en redeveloppant ces composantes mecaniques afin qu'elles soient adaptees aux nouveaux refrigerants. Dans cette optique, et afin de mieux comprendre le comportement thermique des evaporateurs au CO2 fonctionnant dans des conditions seches, qu'un groupe de chercheurs du CanmetENERGIE avaient lance, en 2000, un programme de R & D. Dans le cadre de programme un outil de simulation des evaporateurs au CO2 a ete developpe et un banc d'essai contenant une boucle secondaire de refrigeration utilisant le CO2 comme refrigerant a ete construit. Comme continuite de ce travail de recherche, en 2006 ce meme groupe de recherche a lance un nouveau projet qui consiste a faire une etude theorique et experimentale des evaporateurs au CO2 operants dans des conditions de givrage. Et, c'est exactement dans le cadre de ce projet que se positionne ce travail de these. Ce travail de recherche a ete entrepris pour mieux comprendre le comportement thermique et hydrodynamique des serpentins fonctionnant dans des conditions de givrage, l'effet des circuits de refrigerant ainsi que celui des parametres geometriques et d'operation. Pour cela, un travail theorique supporte par une etude experimentale a ete effectue

  7. Electrorecovery of actinides at room temperature

    Energy Technology Data Exchange (ETDEWEB)

    Stoll, Michael E [Los Alamos National Laboratory; Oldham, Warren J [Los Alamos National Laboratory; Costa, David A [Los Alamos National Laboratory

    2008-01-01

    There are a large number of purification and processing operations involving actinide species that rely on high-temperature molten salts as the solvent medium. One such application is the electrorefining of impure actinide metals to provide high purity material for subsequent applications. There are some drawbacks to the electrodeposition of actinides in molten salts including relatively low yields, lack of accurate potential control, maintaining efficiency in a highly corrosive environment, and failed runs. With these issues in mind we have been investigating the electrodeposition of actinide metals, mainly uranium, from room temperature ionic liquids (RTILs) and relatively high-boiling organic solvents. The RTILs we have focused on are comprised of 1,3-dialkylimidazolium or quaternary ammonium cations and mainly the {sup -}N(SO{sub 2}CF{sub 3}){sub 2} anion [bis(trif1uoromethylsulfonyl)imide {equivalent_to} {sup -}NTf{sub 2}]. These materials represent a class of solvents that possess great potential for use in applications employing electrochemical procedures. In order to ascertain the feasibility of using RTILs for bulk electrodeposition of actinide metals our research team has been exploring the electron transfer behavior of simple coordination complexes of uranium dissolved in the RTIL solutions. More recently we have begun some fundamental electrochemical studies on the behavior of uranium and plutonium complexes in the organic solvents N-methylpyrrolidone (NMP) and dimethylsulfoxide (DMSO). Our most recent results concerning electrodeposition will be presented in this account. The electrochemical behavior of U(IV) and U(III) species in RTILs and the relatively low vapor pressure solvents NMP and DMSO is described. These studies have been ongoing in our laboratory to uncover conditions that will lead to the successful bulk electrodeposition of actinide metals at a working electrode surface at room temperature or slightly elevated temperatures. The RTILs we

  8. Recovery of actinides from actinide-aluminium alloys by chlorination: Part I

    Energy Technology Data Exchange (ETDEWEB)

    Cassayre, L., E-mail: cassayre@chimie.ups-tlse.fr [Laboratoire de Genie Chimique (LGC), Departement Procedes Electrochimiques, CNRS-UMR 5503, Universite de Toulouse III - Paul Sabatier, 31062 Toulouse (France); Soucek, P.; Mendes, E.; Malmbeck, R.; Nourry, C.; Eloirdi, R.; Glatz, J.-P. [European Commission, JRC, Institute for Transuranium Elements, Postfach 2340, 76125 Karlsruhe (Germany)

    2011-07-01

    Pyrochemical processes in molten LiCl-KCl are being developed in ITU for recovery of actinides from spent nuclear fuel. The fuel is anodically dissolved to the molten salt electrolyte and actinides are electrochemically reduced on solid aluminium cathodes forming solid actinide-aluminium alloys. A chlorination route is being investigated for recovery of actinides from the alloys. This route consists in three steps: Vacuum distillation for removal of the salt adhered on the electrode, chlorination of the actinide-aluminium alloys by chlorine gas and sublimation of the formed AlCl{sub 3}. A thermochemical study showed thermodynamic feasibility of all three steps. On the basis of the conditions identified by the calculations, experiments using pure UAl{sub 3} alloy were carried out to evaluate and optimise the chlorination step. The work was focused on determination of the optimal temperature and Cl{sub 2}/UAl{sub 3} molar ratio, providing complete chlorination of the alloy without formation of volatile UCl{sub 5} and UCl{sub 6}. The results showed high efficient chlorination at a temperature of 150 deg. C.

  9. Recovery of actinides from actinide-aluminium alloys by chlorination: Part I

    International Nuclear Information System (INIS)

    Cassayre, L.; Soucek, P.; Mendes, E.; Malmbeck, R.; Nourry, C.; Eloirdi, R.; Glatz, J.-P.

    2011-01-01

    Pyrochemical processes in molten LiCl-KCl are being developed in ITU for recovery of actinides from spent nuclear fuel. The fuel is anodically dissolved to the molten salt electrolyte and actinides are electrochemically reduced on solid aluminium cathodes forming solid actinide-aluminium alloys. A chlorination route is being investigated for recovery of actinides from the alloys. This route consists in three steps: Vacuum distillation for removal of the salt adhered on the electrode, chlorination of the actinide-aluminium alloys by chlorine gas and sublimation of the formed AlCl 3 . A thermochemical study showed thermodynamic feasibility of all three steps. On the basis of the conditions identified by the calculations, experiments using pure UAl 3 alloy were carried out to evaluate and optimise the chlorination step. The work was focused on determination of the optimal temperature and Cl 2 /UAl 3 molar ratio, providing complete chlorination of the alloy without formation of volatile UCl 5 and UCl 6 . The results showed high efficient chlorination at a temperature of 150 deg. C.

  10. Minor actinide transmutation on PWR burnable poison rods

    International Nuclear Information System (INIS)

    Hu, Wenchao; Liu, Bin; Ouyang, Xiaoping; Tu, Jing; Liu, Fang; Huang, Liming; Fu, Juan; Meng, Haiyan

    2015-01-01

    Highlights: • Key issues associated with MA transmutation are the appropriate loading pattern. • Commercial PWRs are the only choice to transmute MAs in large scale currently. • Considerable amount of MA can be loaded to PWR without disturbing k eff markedly. • Loading MA to PWR burnable poison rods for transmutation is an optimal loading pattern. - Abstract: Minor actinides are the primary contributors to long term radiotoxicity in spent fuel. The majority of commercial reactors in operation in the world are PWRs, so to study the minor actinide transmutation characteristics in the PWRs and ultimately realize the successful minor actinide transmutation in PWRs are crucial problem in the area of the nuclear waste disposal. The key issues associated with the minor actinide transmutation are the appropriate loading patterns when introducing minor actinides to the PWR core. We study two different minor actinide transmutation materials loading patterns on the PWR burnable poison rods, one is to coat a thin layer of minor actinide in the water gap between the zircaloy cladding and the stainless steel which is filled with water, another one is that minor actinides substitute for burnable poison directly within burnable poison rods. Simulation calculation indicates that the two loading patterns can load approximately equivalent to 5–6 PWR annual minor actinide yields without disturbing the PWR k eff markedly. The PWR k eff can return criticality again by slightly reducing the boric acid concentration in the coolant of PWR or removing some burnable poison rods without coating the minor actinide transmutation materials from PWR core. In other words, loading minor actinide transmutation material to PWR does not consume extra neutron, minor actinide just consumes the neutrons which absorbed by the removed control poisons. Both minor actinide loading patterns are technically feasible; most importantly do not need to modify the configuration of the PWR core and

  11. On the solvation of actinide ions

    International Nuclear Information System (INIS)

    Hagberg, D.

    2007-01-01

    Complete text of publication follows: Simulation of the universal ions in water solution is a standardized tool commonly used today. The route to simulation of actinide ions is normally tough because the evaluation of the simulation parameters are normally not given empirically and standard Hartree-Fock calculations are not accurate enough. We use multiconfigurational quantum chemical calculations when deriving the parameters for actinide ion-water potential [1]. The parameters are then simulated using classical molecular dynamics. A case study of the Cm 3+ ion will be presented on the poster. Results from the simulations will be also be discussed, e.g. the radial distribution functions and the coordination number. [1] D. Hagberg, G. Karlstrom, B.O. Roos and L. Gagliardi The coordination of uranyl in water: a combined quantum chemical and molecular simulation study J. Am. Chem. Soc. 127, 14250-14256 (2005)

  12. Rapid ion-exchange separations of actinides

    International Nuclear Information System (INIS)

    Usuda, Shigekazu

    1988-01-01

    For the purpose of studying short-lived actinide nuclides, three methods for rapid ion exchange separation of actinide elements with mineral acid-alcohol mixed media were developed: anion exchange with nitric acid-methyl alcohol mixed media to separate the transplutonium and rare earth elements from target material, U or Pu and Al catcher foils; anion exchange with hydrochloric acid-methyl alcohol media to separate Am+Cm, Bk and Cf+Fm from the target, catcher foils and major fission products; and cation exchange with hydrochloric acid-methyl alcohol media and with concentrated hydrochloric acid to separate the transplutonium elements as a group from the rare earths after eliminating the large amounts of U, Al, Cu, Fe etc. The methods enable one to perform rapid and effective separation at elevated temperature (90 deg C) and immediate source preparation for alpha-ray spectrometry. (author) 47 refs.; 10 figs

  13. Actinide and fission product separation and transmutation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-07-01

    The first international information exchange meeting on actinide and fission product separation and transmutation, took place in Mito in Japan, on 6-8 November 1990. It starts with a number of general overview papers to give us some broad perspectives. Following that it takes a look at some basic facts about physics and about the quantities of materials it is talking about. Then it proceeds to some specific aspects of partitioning, starting with evolution from today commercially applied processes and going on to other possibilities. At the end of the third session it takes a look at the significance of partitioning and transmutation of actinides before it embarks on two sessions on transmutation, first in reactors and second in accelerators. The last session is designed to throw back into the discussion the main points which need to be looked at when considering future work in this area. (A.L.B.)

  14. Chemistry of the actinide elements. Second edition

    International Nuclear Information System (INIS)

    Katz, J.J.; Seaborg, G.T.; Morss, L.R.

    1987-01-01

    This is an exhaustive, updated discourse on the chemistry of Actinides, Volume 1 contains a systematic coverage of the elements Ac, Th, Pa, U, Np, and Pu, which constitutes Part 1 of the work. The characterization of each element is discussed in terms of its nuclear properties, occurrence, preparation, atomic and metallic properties, chemistry of specific compounds, and solution chemistry. The first part of Volume 2 follows the same format as Volume 1 but is confined to the elements Am, Cm, Bk, Cf, and Es, plus a more condensed coverage of the Transeinsteinium elements (Fm, Md, No, Lw, and 104-109). Part 2 of this volume is devoted to a discussion of the actinide elements in general, with a specific focus on electronic spectra, thermodynamic and magnetic properties, the metallic state, structural chemistry, solution kinetics, organometallic chemistry for σ- and π-bonded compounds, and some concluding remarks on the superheavy elements

  15. The thermodynamic functions of gaseous actinide elements

    International Nuclear Information System (INIS)

    Rand, M.H.

    1979-01-01

    The actinide gases have large number of unobserved energy states - up to 3 x 10 6 for Pu(g) - which could contribute to the partition function and its derivatives, from which the thermal functions of these gases are calculated. Existing compilations have simply ignored these levels. By making reasonable assumptions as to the distribution of these energy states, their effect on the functions can be calculated. It is concluded that the existing compilations will be inadequate above approximately 2000K. The effect is particularly marked on the heat capacity. For example, when unobserved levels for Pu(g) are included, the heat capacity of Pu(g) reaches a maximum value of more than 12R at 3200K. Similar considerations will apply to the gaseous actinide ions. (orig.) [de

  16. Actinide and fission product separation and transmutation

    International Nuclear Information System (INIS)

    1991-01-01

    The first international information exchange meeting on actinide and fission product separation and transmutation, took place in Mito in Japan, on 6-8 November 1990. It starts with a number of general overview papers to give us some broad perspectives. Following that it takes a look at some basic facts about physics and about the quantities of materials it is talking about. Then it proceeds to some specific aspects of partitioning, starting with evolution from today commercially applied processes and going on to other possibilities. At the end of the third session it takes a look at the significance of partitioning and transmutation of actinides before it embarks on two sessions on transmutation, first in reactors and second in accelerators. The last session is designed to throw back into the discussion the main points which need to be looked at when considering future work in this area. (A.L.B.)

  17. Seventeen-coordinate actinide helium complexes

    Energy Technology Data Exchange (ETDEWEB)

    Kaltsoyannis, Nikolas [School of Chemistry, The University of Manchester (United Kingdom)

    2017-06-12

    The geometries and electronic structures of molecular ions featuring He atoms complexed to actinide cations are explored computationally using density functional and coupled cluster theories. A new record coordination number is established, as AcHe{sub 17}{sup 3+}, ThHe{sub 17}{sup 4+}, and PaHe{sub 17}{sup 4+} are all found to be true geometric minima, with the He atoms clearly located in the first shell around the actinide. Analysis of AcHe{sub n}{sup 3+} (n=1-17) using the quantum theory of atoms in molecules (QTAIM) confirms these systems as having closed shell, charge-induced dipole bonding. Excellent correlations (R{sup 2}>0.95) are found between QTAIM metrics (bond critical point electron densities and delocalization indices) and the average Ac-He distances, and also with the incremental He binding energies. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

  18. Actinide uptake by transferrin and ferritin metalloproteins

    International Nuclear Information System (INIS)

    Den Auwer, C.; Llorens, I.; Moisy, Ph.; Vidaud, C.; Goudard, F.; Barbot, C.; Solari, P.L.; Funke, H.

    2005-01-01

    In order to better understand the mechanisms of actinide uptake by specific biomolecules, it is essential to explore the intramolecular interactions between the cation and the protein binding site. Although this has long been done for widely investigated transition metals, very few studies have been devoted to complexation mechanisms of actinides by active chelation sites of metalloproteins. In this field, X-ray absorption spectroscopy has been extensively used as a structural and electronic metal cation probe. The two examples that are presented here are related to two metalloproteins in charge of iron transport and storage in eukaryote cells: transferrin and ferritin. U(VI)O 2 2+ , Np(IV) and Pu(IV) have been selected because of their possible role as contaminant from the geosphere. (orig.)

  19. Minor actinide transmutation in accelerator driven systems

    Energy Technology Data Exchange (ETDEWEB)

    Friess, Friederike [IANUS, TU Darmstadt (Germany)

    2015-07-01

    Transmutation of radioactive waste, the legacy of nuclear energy use, gains rising interest. This includes the development of facilities able to transmute minor actinides (MA) into stable or short-lived isotopes before final disposal. The most common proposal is to use a double-strata approach with accelerator-driven-systems (ADS) for the efficient transmutation of MA and power reactors to dispose plutonium. An ADS consists of a sub-critical core that reaches criticality with neutrons supplied by a spallation target. An MCNP model of the ADS system Multi Purpose Research Reactor for Hightech Applications will be presented. Depletion calculations have been performed for both standard MOX fuel and transmutation fuel with an increased content of minor actinides. The resulting transmutation rates for MAs are compared to published values. Special attention is given to selected fission products such as Tc-99 and I-129, which impact the radiation from the spent fuel significantly.

  20. Actinides: from heavy fermions to plutonium metallurgy

    International Nuclear Information System (INIS)

    Smith, J.L.; Fisk, Z.; Hecker, S.S.

    1984-01-01

    The actinide elements mark the emergence of 5f electrons. The f electrons possess sufficiently unusual characteristics that their participation in atomic binding often result in dramatic changes in properties. This provides an excellent opportunity to study the question of localization of electrons; a question that is paramount in predicting the physical and chemical properties of d and f electron transition metals. The transition region between localized (magnetic) and itinerant (often superconducting) behavior provides for many interesting phenomena such as structural instabilities (polymorphism), spin fluctuations, mixed valences, charge density waves, exceptional catalytic activity and hydrogen storage. This region offers most interesting behavior such as that exhibited by the actinide compounds UBe 13 and UPt 3 . Both compounds are heavy-fermion superconductors in which both magnetic and superconducting behavior exist in the same electrons. The consequences of f-electron bonding (which appears greatest at Plutonium) show dramatic effects on phase stability, alloying behavior, phase transformations and mechanical behavior

  1. Actinide Source Term Program, position paper. Revision 1

    International Nuclear Information System (INIS)

    Novak, C.F.; Papenguth, H.W.; Crafts, C.C.; Dhooge, N.J.

    1994-01-01

    The Actinide Source Term represents the quantity of actinides that could be mobilized within WIPP brines and could migrate with the brines away from the disposal room vicinity. This document presents the various proposed methods for estimating this source term, with a particular focus on defining these methods and evaluating the defensibility of the models for mobile actinide concentrations. The conclusions reached in this document are: the 92 PA open-quotes expert panelclose quotes model for mobile actinide concentrations is not defensible; and, although it is extremely conservative, the open-quotes inventory limitsclose quotes model is the only existing defensible model for the actinide source term. The model effort in progress, open-quotes chemical modeling of mobile actinide concentrationsclose quotes, supported by a laboratory effort that is also in progress, is designed to provide a reasonable description of the system and be scientifically realistic and supplant the open-quotes Inventory limitsclose quotes model

  2. Actinides reduction by recycling in a thermal reactor

    International Nuclear Information System (INIS)

    Ramirez S, J. R.; Martinez C, E.; Balboa L, H.

    2014-10-01

    This work is directed towards the evaluation of an advanced nuclear fuel cycle in which radioactive actinides could be recycled to remove most of the radioactive material; firstly a production reference of actinides in standard nuclear fuel of uranium at the end of its burning in a BWR reactor is established, after a fuel containing plutonium is modeled to also calculate the actinides production in MOX fuel type. Also it proposes a design of fuel rod containing 6% of actinides in a matrix of uranium from the tails of enrichment, then four standard uranium fuel rods are replaced by actinides rods to evaluate the production and transmutation thereof, the same procedure was performed in the fuel type MOX and the end actinide reduction in the fuel was evaluated. (Author)

  3. Strength of Coriolis Coupling in actinide nuclei

    International Nuclear Information System (INIS)

    Peker, L.K.; Rasmussen, J.O.; Hamilton, J.H.

    1982-01-01

    Coriolis Coupling V/sub cor/ plays an important role in deformed nuclei. V/sub cor/ is proportional to h 2 /J[j (j + 1) -Ω (Ω + 1)]/sup 1/2/ and therefore is particularly significant in the nuclei with large j and low Ω Nilsson levels close to Fermi surface: n(i/sub 13/2/) in A = 150 to 170 rare-earth nuclei and p(i/sub 13/2/) and n(j/sub 15/2/) in A greater than or equal to 224 actinide nuclei. Because of larger j (n(j/sub 15/2/) versus n(i/sub 13/2/)) and smaller deformations (β approx. = 0.22 versus β 0.28) it was reasonable to expect that in actinide nuclei Coriolis effects are stronger than in the rare earth nuclei. Recently it was realized that the strength of observed Coriolis effects depends not only on the genuine Coriolis Coupling but also on the interplay between Coriolis ad pairing forces which leads to an interference between the wave functions of two mixing rotational bands. As a consequence the effective interaction V/sub eff/ of both bands is an oscillating function of the degree of shell filling (or chemical potential lambda F). It was shown that in the rare earth nuclei this interference strongly influenced conclusions about the trends in the Coriolis coupling strength and explained many of the observed band-mixing features (the sharpness of back banding curves, details of the blocking effect etc.). From theoretical analysis it was concluded that in the majority of actinide nuclei the effective interaction V/sub eff/ is strong, and therefore the Coriolis band-mixing have to be very strong. In this paper we would like to demonstrate that contrary to these predictions experimental data suggest that Coriolis band mixing in studied actinide nuclei is relatively weak and possibly significantly weaker than in rare earth nuclei

  4. Actinide and fission product partitioning and transmutation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    The fourth international information exchange meeting on actinide and fission product partitioning and transmutation, took place in Mito City in Japan, on 111-13 September 1996. The proceedings are presented in six sessions: the major programmes and international cooperation, the partitioning and transmutation programs, feasibility studies, particular separation processes, the accelerator driven transmutation, and the chemistry of the fuel cycle. (A.L.B.)

  5. Actinide burning in the integral fast reactor

    International Nuclear Information System (INIS)

    Chang, Y.I.

    1993-01-01

    During the past few years, Argonne National Laboratory has been developing the integral fast reactor (IFR), an advanced liquid-metal reactor concept. In the IFR, the inherent properties of liquid-metal cooling are combined with a new metallic fuel and a radically different refining process to allow breakthroughs in passive safety, fuel cycle economics, and waste management. A key feature of the IFR concept is its unique pyroprocessing. Pyroprocessing has the potential to radically improve long-term waste management strategies by exploiting the following attributes: 1. Minor actinides accompany plutonium product stream; therefore, actinide recycling occurs naturally. Actinides, the primary source of long-term radiological toxicity, are removed from the waste stream and returned to the reactor for in situ burning, generating useful energy. 2. High-level waste volume from pyroprocessing call be reduced substantially as compared with direct disposal of spent fuel. 3. Decay heat loading in the repository can be reduced by a large factor, especially for the long-term burden. 4. Low-level waste generation is minimal. 5. Troublesome fission products, such as 99 Tc, 129 I, and 14 C, are contained and immobilized. Singly or in combination, the foregoing attributes provide important improvements in long-term waste management in terms of the ease in meeting technical performance requirements (perhaps even the feasibility of demonstrating that technical performance requirements can be met) and perhaps also in ultimate public acceptance. Actinide recycling, if successfully developed, could well help the current repository program by providing an opportunity to enhance capacity utilization and by deferring the need for future repositories. It also represents a viable technical backup option in the event unforeseen difficulties arise in the repository licensing process

  6. BWR Assembly Optimization for Minor Actinide Recycling

    International Nuclear Information System (INIS)

    Maldonado, G. Ivan; Christenson, John M.; Renier, J.P.; Marcille, T.F.; Casal, J.

    2010-01-01

    The Primary objective of the proposed project is to apply and extend the latest advancements in LWR fuel management optimization to the design of advanced boiling water reactor (BWR) fuel assemblies specifically for the recycling of minor actinides (MAs). A top-level objective of the Advanced Fuel Cycle Systems Analysis program element of the DOE NERI program is to investigate spent fuel treatment and recycling options for current light water reactors (LWRs). Accordingly, this project targets to expand the traditional scope of nuclear fuel management optimization into the following two complementary specific objectives: (1) To develop a direct coupling between the pin-by-pin within-bundle loading control variables and core-wide (bundle-by-bundle) optimization objectives, (2) to extend the methodology developed to explicitly encompass control variables, objectives, and constraints designed to maximize minor actinide incineration in BWR bundles and cycles. The first specific objective is projected to 'uncover' dormant thermal margin made available by employing additional degrees of freedom within the optimization process, while the addition of minor actinides is expected to 'consume' some of the uncovered thermal margin. Therefore, a key underlying goal of this project is to effectively invest some of the uncovered thermal margin into achieving the primary objective.

  7. Measurement of actinide neutron cross sections

    International Nuclear Information System (INIS)

    Firestone, Richard B.; Nitsche, Heino; Leung, Ka-Ngo; Perry, DaleL.; English, Gerald

    2003-01-01

    The maintenance of strong scientific expertise is critical to the U.S. nuclear attribution community. It is particularly important to train students in actinide chemistry and physics. Neutron cross-section data are vital components to strategies for detecting explosives and fissile materials, and these measurements require expertise in chemical separations, actinide target preparation, nuclear spectroscopy, and analytical chemistry. At the University of California, Berkeley and the Lawrence Berkeley National Laboratory we have trained students in actinide chemistry for many years. LBNL is a leader in nuclear data and has published the Table of Isotopes for over 60 years. Recently, LBNL led an international collaboration to measure thermal neutron capture radiative cross sections and prepared the Evaluated Gamma-ray Activation File (EGAF) in collaboration with the IAEA. This file of 35, 000 prompt and delayed gamma ray cross-sections for all elements from Z=1-92 is essential for the neutron interrogation of nuclear materials. LBNL has also developed new, high flux neutron generators and recently opened a 1010 n/s D+D neutron generator experimental facility

  8. Value of burnup credit beyond actinides

    International Nuclear Information System (INIS)

    Lancaster, D.; Fuentes, E.; Kang, Chi.

    1997-01-01

    DOE has submitted a topical report to the NRC justifying burnup credit based only on actinide isotopes (U-234, U-235, U-236, U-238, Pu-238, Pu-239, Pu-240, Pu-241, Pu-242, and Am-241). When this topical report is approved, it will allow a great deal of the commercial spent nuclear fuel to be transported in significantly higher capacity casks. A cost savings estimate for shipping fuel in 32 assembly (burnup credit) casks as opposed to 24 assembly (non-burnup credit) casks was previously presented. Since that time, more detailed calculations have been performed using the methodology presented in the Actinide-Only Burnup Credit Topical Report. Loading curves for derated casks have been generated using actinide-only burnup credit and are presented in this paper. The estimates of cost savings due to burnup credit for shipping fuel utilizing 32, 30, 28, and 24 assembly casks where only the 24 assembly cask does not burnup credit have been created and are discussed. 4 refs., 2 figs

  9. Study on remain actinides recovery in pyro reprocessing

    International Nuclear Information System (INIS)

    Suharto, Bambang

    1996-01-01

    The spent fuel reprocessing by dry process called pyro reprocessing have been studied. Most of U, Pu and MA (minor actinides) from the spent fuel will be recovered and be fed back to the reactor as new fuel. Accumulation of remain actinides will be separated by extraction process with liquid cadmium solvent. The research was conducted by computer simulation to calculate the stage number required. The calculation's results showed on the 20 stages extractor more than 99% actinides can be separated. (author)

  10. Successive change regularity of actinide properties with atomic number

    International Nuclear Information System (INIS)

    Yang Xuexian

    1990-08-01

    The development and achievements on chemistry of actinide elements are summarised. The relations of properties of actinides to their electronic configurations of valence electronic shells are discussed. Some anomalies of solid properties, the radius contraction, the stable state effect of f 7n -orbits (n = 0, 1, 2) and the tetrad effect of oxidation states, etc., with atomic number (Z) are described. 31 figures appended show directly the successive change regularity of actinide properties with Z

  11. Actinide recycle potential in the integral fast reactor

    International Nuclear Information System (INIS)

    Chang, Y.I.

    1993-01-01

    The Integral Fast Reactor (IFR) fuel cycle holds promise for substantial improvements in economics, diversion-resistance, and waste management. In the IFR pyroprocessing, minor actinides accompany plutonium product stream, and therefore, actinide recycle occurs naturally. The fast neutron spectrum of the IFR makes it an ideal actinide burner, as well. This paper discusses technical features of the IFR fuel cycle, its technical progress, the development status, and potential implications on long-term waste management

  12. Preparation, properties, and some recent studies of the actinide metals

    International Nuclear Information System (INIS)

    Haire, R.G.

    1985-01-01

    The actinide elements form a unique series of metals. The variation in their physial properties combined with the varying availability of the different elements offers a challenge to the preparative scientist. This article provides a brief review of selected methods used for preparing μg to kg amounts of the actinide metals and the properties of these metals. In addition, some recent studies on selected actinide metals are discussed. 62 refs

  13. Hydrothermal decomposition of actinide(IV oxalates: a new aqueous route towards reactive actinide oxide nanocrystals

    Directory of Open Access Journals (Sweden)

    Walter Olaf

    2016-01-01

    Full Text Available The hydrothermal decomposition of actinide(IV oxalates (An= Th, U, Pu at temperatures between 95 and 250 °C is shown to lead to the production of highly crystalline, reactive actinide oxide nanocrystals (NCs. This aqueous process proved to be quantitative, reproducible and fast (depending on temperature. The NCs obtained were characterised by X-ray diffraction and TEM showing their size to be smaller than 15 nm. Attempts to extend this general approach towards transition metal or lanthanide oxalates failed in the 95–250 °C temperature range. The hydrothermal decomposition of actinide oxalates is therefore a clean, flexible and powerful approach towards NCs of AnO2 with possible scale-up potential.

  14. Recent progress in actinide and lanthanide solvent extraction

    International Nuclear Information System (INIS)

    Musikas, C.; Hubert, H.; Benjelloun, N.; Vitorge, P.; Bonnin, M.; Forchioni, A.; Chachaty, C.

    1983-04-01

    Work in progress on actinide solvent extraction is briefly reviewed in this paper. 1 H and 31 P NMR are used to elucidate several fundamental unsolved problems concerning organophosphorous extractants often used in actinides extraction: determination of site of dialkylthiophosphate protonation and addition of basic phosphine oxide to dibutylthiophosphoric acid dimer. Extraction of Am III and Eu from high radioactivity level wastes by tetrasubsituted methylene diamides is investigated. Trivalent actinide-lanthanide group are separated by solvent extraction using soft donor ligand complexes which are more stable. The synergism of dinonylnaphtalene sulfonic acid (HDNNS) associated with several neutral donors like TBP, TOPO, amides are examined in the trivalent and tetravalent actinide extraction

  15. Biotransformation of uranium and other actinides in radioactive wastes

    International Nuclear Information System (INIS)

    Francis, A.J.

    1998-01-01

    Microorganisms affect the solubility, bioavailability, and mobility of actinides in radioactive wastes. Under appropriate conditions, actinides are solubilized or stabilized by the direct enzymatic or indirect nonenzymatic actions of microorganisms. Biotransformation of various forms of uranium (ionic, inorganic, and organic complexes) by aerobic and anaerobic microorganisms has been extensively studied, whereas limited information is available on other important actinides (Th, Np, Pu, and Am). Fundamental information on the mechanisms of biotransformation of actinides by microbes under various environmental conditions will be useful in predicting the long-term performance of waste repositories and in developing strategies for waste management and remediation of contaminated sites. (orig.)

  16. La communauté dans l'espace de reproduction des familles paysannes au Pérou

    OpenAIRE

    Bey, Marguerite

    1992-01-01

    L'objet de ce texte est l'étude du changement social dans la communauté paysanne. La recherche porte sur deux communautés des Andes centrales péruviennes, dans une vallée proche de la capitale. L'analyse des comportements des familles paysannes recouvre une période d'un trentaine d'années, durant laquelle les communautés subissent des transformations rapides du fait de l'importance accrue de deux phénomènes : l'éducation scolaire et la monétarisation de l'économie paysanne, qu'accompagne l'ou...

  17. Advanced Aqueous Separation Systems for Actinide Partitioning

    Energy Technology Data Exchange (ETDEWEB)

    Nash, Ken [Washington State Univ., Pullman, WA (United States); Martin, Leigh [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lumetta, Gregg [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-04-02

    One of the most challenging aspects of advanced processing of used nuclear fuel is the separation of transplutonium actinides from fission product lanthanides. This separation is essential if actinide transmutation options are to be pursued in advanced fuel cycles, as lanthanides compete with actinides for neutrons in both thermal and fast reactors, thus limiting efficiency. The separation is difficult because the chemistry of Am3+ and Cm3+ is nearly identical to that of the trivalent lanthanides (Ln3+). The prior literature teaches that two approaches offer the greatest probability of devising a successful group separation process based on aqueous processes: 1) the application of complexing agents containing ligand donor atoms that are softer than oxygen (N, S, Cl-) or 2) changing the oxidation state of Am to the IV, V, or VI state to increase the essential differences between Am and lanthanide chemistry (an approach utilized in the PUREX process to selectively remove Pu4+ and UO22+ from fission products). The latter approach offers the additional benefit of enabling a separation of Am from Cm, as Cm(III) is resistant to oxidation and so can easily be made to follow the lanthanides. The fundamental limitations of these approaches are that 1) the soft(er) donor atoms that interact more strongly with actinide cations than lanthanides form substantially weaker bonds than oxygen atoms, thus necessitating modification of extraction conditions for adequate phase transfer efficiency, 2) soft donor reagents have been seen to suffer slow phase transfer kinetics and hydro-/radiolytic stability limitations and 3) the upper oxidation states of Am are all moderately strong oxidants, hence of only transient stability in media representative of conventional aqueous separations systems. There are examples in the literature of both approaches having been described. However, it is not clear at present that any extant process is sufficiently robust for application at the scale

  18. Catastrophes et consommation des substances psychoactives

    Directory of Open Access Journals (Sweden)

    Krivokapić Žilijeta

    2009-01-01

    Full Text Available (francuski Les catastrophes, les accidents, les stress, les traumatismes sont des expériences négatives de vie accompagnées de changements physiologiques, cognitifs, émotionnels et comportementaux. Les stratégies les plus courantes inefficaces à résoudre les expériences de vie négatives sont: l' agression - ouverte (physique et / ou verbale, passive et latente, le retrait social, le placage, la dépression, l'impuissance, l' isolement et l' abus de médicaments, en particulier de drogues. Les personnes se trouvant dans des situations stressantes essayent de s' aider elles-mêmes souvent en recourant à des substances qui procurent une amélioration de leur état et suppriment le malaise momentané. Cette 'thérapie par auto-thérapie' comporte de graves risques La personne qui, après une période de consommation de ces substances devenaient dépendante, manifeste des changements visibles au niveau physique et psychologique. Elle se dérobe à ses obligations, rompt avec les activités auxquelles elle prenait plaisir autrefois de même qu' avec ses loisirs et ses intérêts; elle change des amis, ses relations familiales et amicales deviennent pauvres et remplies de nombreux conflits; elle devient moins critique et plus manipulative, commence à mentir, trompe pour dissimuler sa toxicomanie, rejoint un groupe de ses semblables, se livre à des activités criminogènes, de plus en plus se dégrade physiquement. L' alcool qui, étant le plus accessible et par conséquent généralement 'la première mesure d' auto-thérapie', a un impact particulièrement dévastateur sur l' organisme sensible au point de vue psycho-physique. Nous assistons à de nombreuses difficultés et des problèmes qui, à la suite de la consommation d' alcool, aggravent ceux liés à des expériences des événements traumatisants. De même l' efficacité de certains comprimés de réduire les tensions ou d' améliorer l' état du patient conduit fréquemment

  19. Developpement des betons semi autoplacants a rheologie adaptee pour des infrastructures

    Science.gov (United States)

    Sotomayor Cruz, Cristian Daniel

    Au cours des dernières décennies, les infrastructures canadiennes et québécoises comportent plusieurs structures en béton armé présentant des problèmes de durabilité dus aux conditions climatiques sévères, à la mauvaise conception des structures, à la qualité des matériaux, aux types des bétons choisis, aux systèmes de construction ou à l'existence d'événements incontrôlables. En ce qui concerne le choix du béton pour la construction des infrastructures, une vaste gamme de béton divisée en deux principaux types peut être utilisée: le béton conventionnel vibré (BCV) et le béton autoplaçant (BAP). Dans le cas d'un BCV, la consolidation inadéquate par vibration a été un problème récurrent, occasionnant des dommages structuraux. Ceci a conduit à une réduction de la durabilité et à une augmentation du coût d'entretien et de réparation des infrastructures. Rien que l'utilisation d'un BAP a des avantages tels que l'élimination de la vibration, la réduction des coûts de main d'oeuvre et l'amélioration de la qualité des structures, néanmoins, le coût initial d'un BAP par rapport à un BCV ne permet pas encore de généraliser son utilisation dans l'industrie de la construction. Ce mémoire présente la conception d'une nouvelle gamme de béton semi-autoplaçant pour la construction des infrastructures (BSAP-I) exigeant une vibration minimale. Il s'agit de trouver un équilibre optimal entre la rhéologie et le coût initial du nouveau béton pour conférer une bonne performance structurale et économique aux structures. Le programme expérimental établi a premièrement permis d'évaluer la faisabilité d'utilisation des BSAP-I pour la mise en place des piliers d'une infrastructure de pont à Sherbrooke. En plus, l'utilisation d'un plan d'expériences a permis l'évaluation de trois paramètres de formulation sur les propriétés des mélanges de BSAP-I à l'état frais et durci. Finalement, l'évaluation de la performance des

  20. De l'importance des orbites periodiques: Detection et applications

    Science.gov (United States)

    Doyon, Bernard

    L'ensemble des Orbites Periodiques Instables (OPIs) d'un systeme chaotique est intimement relie a ses proprietes dynamiques. A partir de l'ensemble (en principe infini) d'OPIs cachees dans l'espace des phases, on peut obtenir des quantites dynamiques importantes telles les exposants de Lyapunov, la mesure invariante, l'entropie topologique et la dimension fractale. En chaos quantique (i.e. l'etude de systemes quantiques qui ont un equivalent chaotique dans la limite classique), ces memes OPIs permettent de faire le pont entre le comportement classique et quantique de systemes non-integrables. La localisation de ces cycles fondamentaux est un probleme complexe. Cette these aborde dans un premier temps le probleme de la detection des OPIs dans les systemes chaotiques. Une etude comparative de deux algorithmes recents est presentee. Nous approfondissons ces deux methodes afin de les utiliser sur differents systemes dont des flots continus dissipatifs et conservatifs. Une analyse du taux de convergence des algorithmes est aussi realisee afin de degager les forces et les limites de ces schemes numeriques. Les methodes de detection que nous utilisons reposent sur une transformation particuliere de la dynamique initiale. Cette astuce nous a inspire une methode alternative pour cibler et stabiliser une orbite periodique quelconque dans un systeme chaotique. Le ciblage est en general combine aux methodes de controle pour stabiliser rapidement un cycle donne. En general, il faut connaitre la position et la stabilite du cycle en question. La nouvelle methode de ciblage que nous presentons ne demande pas de connaitre a priori la position et la stabilite des orbites periodiques. Elle pourrait etre un outil complementaire aux methodes de ciblage et de controle actuelles.

  1. Structural characterization of the Actinides (III) and (IV) - DOTA complexes

    International Nuclear Information System (INIS)

    Audras, Matthieu

    2014-01-01

    The polyamino-carboxylate anions have been identified as compounds of interest in the operations of actinide separation, in actinide migration in the environment and in human radio-toxicology. The structural characterization of complexes formed between actinides and polyamino-carboxylates ligands is essential for a better understanding of actinide-ligands interactions. Among the polyamino-carboxylate anions, the DOTA ligand (1,4,7,10-tetraaza-cyclododecane tetraacetic acid) is described as a very strong complexing agent of the lanthanides(III), but has been little studied with actinides. The objective of this thesis is to describe the complexes formed between the actinides (III) and (IV) and the DOTA ligand, and compare them with the lanthanide complexes. For this, an approach has been introduced to characterize the complexes by complementary analytical techniques (spectrophotometry, electro-spray ionization mass spectrometry, NMR, EXAFS, electrochemistry), but also by calculations of theoretical chemistry to help the interpretation of the experimental data. The formation of a 1:1 complex is observed with the actinides(III) (plutonium and americium) as for lanthanides(III): rapid formation of intermediate species which evolves slowly towards the formation of a limit complex. Within this complex, the cation is located inside the cavity formed by the ligand. Four nitrogen atoms and four oxygen atoms from the carboxylate functions are involved in the coordination sphere of the cation. However, differences were observed in the bond lengths formed between the cation and the nitrogen atoms (the bonds are somewhat shorter in the case of actinide complexes) as well as the complexation kinetics, which is slightly faster for the actinides(III) than for lanthanide(III) ions of equivalent radius. The same behavior was observed in solution upon complexation of actinides(IV) (uranium, plutonium and neptunium): slow formation of a 1:1 complex (actinide(IV):ligand) in wherein the

  2. Influence de la nuance d'acier des roues ferroviaires en Fatigue de Contact de Roulement

    Directory of Open Access Journals (Sweden)

    Langueh Amavi

    2013-11-01

    Full Text Available Cet article propose une méthodologie de prédiction de la durée de vie des roues ferroviaires permettant de prendre en compte les sollicitations locales via la géométrie réelle du contact roue/rail, le comportement inélastique du matériau (acier et d'intégrer un critère de fatigue. Le contexte industriel, d'étudier l'influence de la nuance d'acier sur la durabilité de la roue. Les principales étapes de l'approche sont l'identification du comportement des matériaux, la détermination des champs de contrainte-déformation stabilisés et l'application d'un critère de fatigue. L'algorithme stationnaire est utilisé pour déterminer les contraintes et déformations suivant les conditions d'exploitation. Trois aciers ont été étudiés en analysant leurs réponses mécaniques, leurs limites d'adaptation et leurs durées de vie moyenne.

  3. Aphasie : Contraintes vs Gouvernement, le cas des clusters

    Directory of Open Access Journals (Sweden)

    Prince Typhanie

    2012-07-01

    faire surfacer les troubles phonémiques à travers une tâche de dénomination et de répétition. Nous comparons le traitement réalisé par chacun des cadres pour le cas des aphasies confrontant ainsi les notions de Contraintes et de Gouvernement en phonologie. Nous montrons comment le cadre CVCV apporte une solution à la question des clusters consonantiques et de leur rôle dans la définition de la complexité segmentale et syllabique. Ce cadre permet de reconsidérer cette notion de complexité en terme d'opérations conditionnées par le gouvernement et la structure interne des segments. Enfin, ce modèle ouvre de nouvelles perspectives d'analyses des comportements aphasiques : comment rendre compte de la structure interne des segments qui soit compatible avec leur comportement syllabique ?

  4. Non-compound nucleus fission in actinide and pre-actinide regions

    Indian Academy of Sciences (India)

    Data on the evaporation residue cross-sections, in addition to those on mass and angular distributions, are necessary for better understanding of the contribution from non-compound nucleus fission in the pre-actinide region. Measurement of mass-resolved angular distribution of fission products in 20Ne+232Th reaction ...

  5. Synergistic extraction of actinides : Part I. Hexa-and pentavalent actinides

    International Nuclear Information System (INIS)

    Patil, S.K.; Ramakrishna, V.V.

    1980-01-01

    A detailed discussion on the reported literature on the synergistic extraction of hexa- and pentavalent actinide ions, by different combinations of extractants and from different aqueous media, is presented. Structural aspects of the various complexes involved in synergism also are reviewed. A short account of the applications based on synergistic extraction is also given. (author)

  6. La prévention des blessures dans les terrains de jeux

    Science.gov (United States)

    Fuselli, Pamela; Yanchar, Natalie L

    2012-01-01

    RÉSUMÉ Dans un climat d’inquiétude croissante à l’égard de l’obésité juvénile et de l’inactivité, les terrains de jeux permettent aux enfants d’être actifs. Ils comportent toutefois aussi des risques, les blessures causées par des chutes étant de loin les plus courants. Les recherches démontrent la possibilité de réduire les blessures dans les terrains de jeux si on abaisse la hauteur des structures de jeu et si on utilise des surfaces molles et profondes pour amortir les chutes. L’Association canadienne de normalisation a publié des normes volontaires qu’elle a mises à jour plusieurs fois pour tenir compte de ces risques. Afin de contribuer à les réduire, les parents peuvent respecter des stratégies simples. Le présent document de principes souligne le fardeau des blessures subies dans les terrains de jeux. Il procure également aux parents et aux dispensateurs de soins des occasions de réduire l’incidence et la gravité des blessures grâce à l’éducation et à la défense d’intérêts, ainsi que de mettre en œuvre des normes de sécurité probantes et des stratégies plus sécuritaires dans les terrains de jeux locaux. Enfin, il remplace le document de principes de la Société canadienne de pédiatrie publié en 2002 sur le sujet.

  7. Research needs in metabolism and dosimetry of the actinides

    International Nuclear Information System (INIS)

    Richmond, C.R.

    1978-01-01

    The following topics are discussed: uranium mine and mill tailings; environmental standards; recommendations of NCRP and ICRP; metabolic models and health effects; life-time exposures to actinides and other alpha emitters; high-specific-activity actinide isotopes versus naturally occurring isotopic mixtures of uranium isotopes; adequacy of the n factor; and metabolism and dosimetry;

  8. ACTINET - EU network of excellence for actinide sciences

    International Nuclear Information System (INIS)

    Gompper, K.

    2006-01-01

    ACTINET, the Network of Excellence for Actinide Sciences within the 6th EU Framework Program, was launched in March 2004 for an initial period of four years. A number of tools are available in ACTINET to serve the purposes of the project, i.e. stimulate and coordinate actinide research in Europe, promote integration, train young scientists and, in this way, ensure and enhance European competence. The large European actinide laboratories with their unique experimental and analytical equipment are available to scientists from Europe as so-called 'pool facilities' within the framework of joint research projects. Setting up a 'theoretical user lab' has turned out to be a promising way of exploiting the synergies of theory and experiment in various fields of actinide science. Joint research projects are supported within the network, working with actinides being made possible in the pool facilities. Training and instruction are ensured by seminars, workshops, and schools organized annually. In familiarizing young scientists with actinide work, ACTINET exercises training functions and contributes to ensuring and enhancing European competence in the field on the medium and long term. Even after only half of its term, ACTINET is developing into a live network, thus decisively contributing towards promoting, coordinating and integrating European actinide research. As actinides play a key role in the use of nuclear power, this benefits European industries, research centers, operators of nuclear power plants and nuclear facilities as well as licensing and regulatory authorities. (orig.)

  9. Transmutation of minor actinide using thorium fueled BWR core

    International Nuclear Information System (INIS)

    Susilo, Jati

    2002-01-01

    One of the methods to conduct transmutation of minor actinide is the use of BWR with thorium fuel. Thorium fuel has a specific behaviour of producing a little secondary minor actinides. Transmutation of minor actinide is done by loading it in the BWR with thorium fuel through two methods, namely close recycle and accumulation recycle. The calculation of minor actinide composition produced, weigh of minor actinide transmuted, and percentage of reminder transmutation was carried SRAC. The calculations were done to equivalent cell modeling from one fuel rod of BWR. The results show that minor actinide transmutation is more effective using thorium fuel than uranium fuel, through both close recycle and accumulation recycle. Minor actinide transmutation weight show that the same value for those recycle for 5th recycle. And most of all minor actinide produced from 5 unit BWR uranium fuel can transmuted in the 6 t h of close recycle. And, the minimal value of excess reactivity of the core is 12,15 % Δk/k, that is possible value for core operation

  10. Actinide extractants for the nuclear industry of the future

    International Nuclear Information System (INIS)

    Musikas, C.; Morisseau, J.C.; Hoel, P.; Guillaume, B.

    1987-06-01

    Non organo-phosphorus extractants properties regarding the extractions of actinides in nuclear fuels reprocessing are presented. N,N-dialkylamides are proposed as alternatives to TBP.N,N'-tetraalkylamides or pentaalkyl propane diamides properties are reported. They show that those bidentate extractants are alternatives to bidentate organophosphorus extractants for actinides (III) extraction from concentrated nitric acid. 11 figs, 15 refs

  11. Separations chemistry for actinide elements: Recent developments and historical perspective

    International Nuclear Information System (INIS)

    Nash, K.L.; Choppin, G.R.

    1997-01-01

    With the end of the cold war, the principal mission in actinide separations has changed from production of plutonium to cleanup of the immense volume of moderately radioactive mixed wastes which resulted from fifty years of processing activities. In order to approach the cleanup task from a proper perspective, it is necessary to understand how the wastes were generated. Most of the key separations techniques central to actinide production were developed in the 40's and 50's for the identification and production of actinide elements. Total actinide recovery, lanthanide/actinide separations, and selective partitioning of actinides from inert constituents are currently of primary concern. To respond to the modern world of actinide separations, new techniques are being developed for separations ranging from analytical methods to detect ultra-trace concentrations (for bioassay and environmental monitoring) to large-scale waste treatment procedures. In this report, the history of actinide separations, both the basic science and production aspects, is examined and evaluated in terms of contemporary priorities

  12. Potential carcinogenic effects of actinides in the environment

    International Nuclear Information System (INIS)

    Harley, N.H.; Pasternack, B.S.

    1979-01-01

    Inhalation of alpha emitting actinides delivers a dose to critical cancer sites in the human body. These sites are the bronchial epithelium and cells near bone surfaces. Inhalation of the naturally occurring actinides uranium and thorium in resuspended soil in the air results in a continuous exposure for the global population of about 0.1 fCi/m 3 for each of these actinides. The highest dose is from the natural actinide 230 Th. Over 50 yr, the dose to bronchial epithelium is 0.05 mrad and to bone surfaces 0.4 mrad. In the case of accidental environmental contamination (e.g. near a nuclear fuel reprocessing plant) the man-made actinides plutonium, americium and curium could deliver about the same alpha dose to these sites if the soil is contaminated to the same level as the natural actinides (approximately 1 pCi/g). Two nuclear accidents have already produced contamination of about this level. Exposures in this case, however, are to small local populations compared with global exposure for the natural actinides. Significant enhancement of the natural radioactive actinide pollution by combustion of all types of fossil fuel is suspected but not enough data are available to estimate total population doses. (author)

  13. Solubility of actinides and surrogates in nuclear glasses

    International Nuclear Information System (INIS)

    Lopez, Ch.

    2003-01-01

    The nuclear wastes are currently incorporated in borosilicate glass matrices. The resulting glass must be perfectly homogeneous. The work discussed here is a study of actinide (thorium and plutonium) solubility in borosilicate glass, undertaken to assess the extent of actinide solubility in the glass and to understand the mechanisms controlling actinide solubilization. Glass specimens containing; actinide surrogates were used to prepare and optimize the fabrication of radioactive glass samples. These preliminary studies revealed that actinide Surrogates solubility in the glass was enhanced by controlling the processing temperature, the dissolution kinetic of the surrogate precursors, the glass composition and the oxidizing versus reducing conditions. The actinide solubility was investigated in the borosilicate glass. The evolution of thorium solubility in borosilicate glass was determined for temperatures ranging from 1200 deg C to 1400 deg C.Borosilicate glass specimens containing plutonium were fabricated. The experimental result showed that the plutonium solubility limit ranged from 1 to 2.5 wt% PuO 2 at 1200 deg C. A structural approach based on the determination of the local structure around actinides and their surrogates by EXAFS spectroscopy was used to determine their structural role in the glass and the nature of their bonding with the vitreous network. This approach revealed a correlation between the length of these bonds and the solubility of the actinides and their surrogates. (author)

  14. Des schémas équivalents pour les circuits couplés multi-enroulements

    Science.gov (United States)

    Keradec, J. P.; Cogitore, B.; Laveuve, E.; Bensoam, M.

    1994-04-01

    The aim of this paper is to represent the electrical behaviour of any number of magnetically coupled windings with couplers and inductors. Two methods, mathematicaly justified, are proposed. The second one introduces only positive inductances. As an exemple, it is applied to the representation of a three column three phase transformer. The obtained circuits supply the requisite guide to design more complete circuits which allow the high frequency behaviour of wound components to be taken into account, especialy in electronics simulation softwares. Le but de cet article est de traduire le comportement électrique d'un nombre quelconque d'enroulements magnétiquement couplés, par des coupleurs et des inductances. Deux méthodes, établies mathématiquement, sont proposées. La seconde n'introduit que des inductances positives. A titre d'exemple, elle est appliquée à la représentation d'un transformateur triphasé à trois colonnes. Les schémas obtenus fournissent l'indispensable ossature de schémas plus complets, aptes à représenter le comportement haute fréquence des composants bobinés, notamment dans un logiciel de simulation électronique.

  15. Thermodynamic analysis of light-actinide elements

    International Nuclear Information System (INIS)

    Brosh, Eli; Makov, Guy; Shneck, Roni Z.

    2005-01-01

    The thermophysical properties of the alpha phases of the light actinide elements Th, U, Np and Pu were analysed. For each of the analysed elements, the Gibbs free-energy was modelled by an explicit function of temperature T and pressure P over the whole relevant T-P range, in a manner compatible with the CALPHAD (Calculation of Alloy Phase Diagrams) method. Several adjustable model-parameters were fitted to available experimental results. The model is based on a new semi-empirical equation of state, which interpolates with Thomas-Fermi type models for the volume and with the Dulong-Petit value for the heat capacity, at extreme pressures

  16. Determination of actinides using ICP-SFMS

    International Nuclear Information System (INIS)

    Nygren, Ulrika

    2006-01-01

    Interest in the determination of the actinides using ICP-MS has steadily increased with the development of systems capable of more sensitive and precise measurements. However, the analysis of less abundant actinides such as Pu and Am is not straightforward due to the need for chemical separation of these elements prior to determination. In many applications of mass-spectrometric actinide analysis, isotope ratio measurements are important, either for the analysis of the isotopic composition of, e.g., U or Pu in the sample, or for quantitative determinations using isotope dilution mass spectrometry. In order to achieve high precision and accuracy in an isotope ratio measurement, corrections for instrumentally induced systematic errors, e.g., due to dead-time and mass bias, need to be considered. In this thesis, different aspects of actinide analysis using ICP-SFMS have been addressed. In Papers I and III, separation procedures based on solid phase extraction for Pu, Am and U were developed and evaluated with respect to chemical yield and separation from elements causing spectral interferences. Applications of the analytical procedures developed comprised measurement of the 240 Pu/ 2 3 9Pu ratio in environmental reference materials, and age determination of Pu based on the 241 Pu/ 241 Am and 240 Pu/ 236 U ratios. In the application of different separation procedures for Pu, previously unidentified spectral interferences were discovered. In Paper II, these interferences were identified as lanthanide phosphate ions and the composition and formation of these species with respect to different instrumental parameters were further examined. Due to the importance of precise and accurate isotope ratio determination, a thorough investigation of the instrumental dead time of an ICP-SFMS system was performed. The dead time was evaluated via both isotope ratio and electronic measurements of the output from the detector amplifier. It was found that the overall uncertainty in ratio

  17. Photofissility of actinide nuclei at intermediate energies

    International Nuclear Information System (INIS)

    Deppman, A.; Tavares, O.A.P.; Duarte, S.B.; Oliveira, E.C. de; Arruda-Neto, J.D.T.; Pina, S.R. de; Likhachev, V.P.; Mesa, J.; Goncalves, M.

    2001-08-01

    We analyze the recent experimental data on photofissility for 237 Np, 238 U, and 232 Th at incident photon energies above 200 MeV. For this analysis, we developed a Monte carlo algorithm for the nuclear evaporation process in photonuclear reactions. This code is used in association with the multi-collisional model for the photon-induced intranuclear cascade process. Our results show a good quantitative and qualitative agreement with the experimental data. It is shown that the emission of protons and alpha particles at the evaporation stage is an important component for the non-saturation of the actinides photofissility up to, at least, 1GeV. (author)

  18. Thermal decomposition of lanthanide and actinide tetrafluorides

    International Nuclear Information System (INIS)

    Gibson, J.K.; Haire, R.G.

    1988-01-01

    The thermal stabilities of several lanthanide/actinide tetrafluorides have been studied using mass spectrometry to monitor the gaseous decomposition products, and powder X-ray diffraction (XRD) to identify solid products. The tetrafluorides, TbF 4 , CmF 4 , and AmF 4 , have been found to thermally decompose to their respective solid trifluorides with accompanying release of fluorine, while cerium tetrafluoride has been found to be significantly more thermally stable and to congruently sublime as CeF 4 prior to appreciable decomposition. The results of these studies are discussed in relation to other relevant experimental studies and the thermodynamics of the decomposition processes. 9 refs., 3 figs

  19. Electronic structure of the light actinides

    International Nuclear Information System (INIS)

    Dunlap, B.D.

    1976-01-01

    In the last few years, considerable advances have been made in our understanding of the properties of the light actinides. Although these are 5f transition elements formally equivalent to the lanthanide (4f) elements, these materials show a much more varied behavior due to the larger spatial extent and ionizability of the 5f electrons. A review is given of some areas of current interest, especially where hyperfine measurements have played an active role. These include studies of a variety of magnetic phenomena, systematics of isomer shift measurements, and studies of paramagnetic relaxation

  20. Fission cross section measurements for minor actinides

    Energy Technology Data Exchange (ETDEWEB)

    Fursov, B. [IPPE, Obninsk (Russian Federation)

    1997-03-01

    The main task of this work is the measurement of fast neutron induced fission cross section for minor actinides of {sup 238}Pu, {sup 242m}Am, {sup 243,244,245,246,247,248}Cm. The task of the work is to increase the accuracy of data in MeV energy region. Basic experimental method, fissile samples, fission detectors and electronics, track detectors, alpha counting, neutron generation, fission rate measurement, corrections to the data and error analysis are presented in this paper. (author)

  1. Status of nuclear data for actinides

    Energy Technology Data Exchange (ETDEWEB)

    Guzhovskii, B.Y.; Gorelov, V.P.; Grebennikov, A.N. [Russia Federal Nuclear Centre, Arzamas (Russian Federation)] [and others

    1995-10-01

    Nuclear data required for transmutation problem include many actinide nuclei. In present paper the analysis of neutron fission, capture, (n,2n) and (n,3n) reaction cross sections at energy region from thermal point to 14 MeV was carried out for Th, Pa, U, Np, Pu, Am and Cm isotops using modern evaluated nuclear data libraries and handbooks of recommended nuclear data. Comparison of these data indicates on substantial discrepancies in different versions of files, that connect with quality and completeness of original experimental data.

  2. Compilation of actinide neutron nuclear data

    International Nuclear Information System (INIS)

    1979-01-01

    The Swedish nuclear data committee has compiled a selected set of neutron cross section data for the 16 most important actinide isotopes. The aim of the report is to present available data in a comprehensible way to allow a comparison between different evaluated libraries and to judge about the reliability of these libraries from the experimental data. The data are given in graphical form below about 1 ev and above about 10 keV shile the 2200 m/s cross sections and resonance integrals are given in numerical form. (G.B.)

  3. Thermodynamics of carbothermic synthesis of actinide mononitrides

    International Nuclear Information System (INIS)

    Ogawa, T.; Shirasu, Y.; Minato, K.; Serizawa, H.

    1997-01-01

    Carbothermic synthesis will be further applied to the fabrication of nitride fuels containing minor actinides (MA) such as neptunium, americium and curium. A thorough understanding of the carbothermic synthesis of UN will be beneficial in the development of the MA-containing fuels. Thermodynamic analysis was carried out for conditions of practical interest in order to better understand the recent fabrication experiences. Two types of solution phases, oxynitride and carbonitride phases, were taken into account. The Pu-N-O ternary isotherm was assessed for the modelling of M(C, N, O). With the understanding of the UN synthesis, the fabrication problems of Am-containing nitrides are discussed. (orig.)

  4. Calculated Bulk Properties of the Actinide Metals

    DEFF Research Database (Denmark)

    Skriver, Hans Lomholt; Andersen, O. K.; Johansson, B.

    1978-01-01

    Self-consistent relativistic calculations of the electronic properties for seven actinides (Ac-Am) have been performed using the linear muffin-tin orbitals method within the atomic-sphere approximation. Exchange and correlation were included in the local spin-density scheme. The theory explains...... the variation of the atomic volume and the bulk modulus through the 5f series in terms of an increasing 5f binding up to plutonium followed by a sudden localisation (through complete spin polarisation) in americium...

  5. Impact of minor actinide recycling on sustainable fuel cycle options

    Energy Technology Data Exchange (ETDEWEB)

    Heidet, F.; Kim, T. K.; Taiwo, T. A.

    2017-11-01

    The recent Evaluation and Screening study chartered by the U.S. Department of Energy, Office of Nuclear Energy, has identified four fuel cycle options as being the most promising. Among these four options, the two single-stage fuel cycles rely on a fast reactor and are differing in the fact that in one case only uranium and plutonium are recycled while in the other case minor actinides are also recycled. The two other fuel cycles are two-stage and rely on both fast and thermal reactors. They also differ in the fact that in one case only uranium and plutonium are recycled while in the other case minor actinides are also recycled. The current study assesses the impact of recycling minor actinides on the reactor core design, its performance characteristics, and the characteristics of the recycled material and waste material. The recycling of minor actinides is found not to affect the reactor core performance, as long as the same cycle length, core layout and specific power are being used. One notable difference is that the required transuranics (TRU) content is slightly increased when minor actinides are recycled. The mass flows are mostly unchanged given a same specific power and cycle length. Although the material mass flows and reactor performance characteristics are hardly affected by recycling minor actinides, some differences are observed in the waste characteristics between the two fuel cycles considered. The absence of minor actinides in the waste results in a different buildup of decay products, and in somewhat different behaviors depending on the characteristic and time frame considered. Recycling of minor actinides is found to result in a reduction of the waste characteristics ranging from 10% to 90%. These results are consistent with previous studies in this domain and depending on the time frame considered, packaging conditions, repository site, repository strategy, the differences observed in the waste characteristics could be beneficial and help improve

  6. Mitigation of Ship Electro-Optical Susceptibility Against Conventional and Asymmetric Threats (Attenuation de la vulnerabilite electro-optique des navires contre les menaces conventionnelles et asymetriques)

    Science.gov (United States)

    2014-04-01

    Panels, vous pouvez demander d’être inclus soit à titre personnel, soit au nom de votre organisation, sur la liste d’envoi. Les publications de la STO...doivent comporter la dénomination « STO », « RTO » ou « AGARD » selon le cas, suivi du numéro de série. Des informations analogues, telles que le titre ...ou « AGARD » selon le cas, suivie du numéro de série (par exemple AGARD-AG-315). Des informations analogues, telles que le titre et la date de

  7. Propriétés de l'enzyme malique des bactéries lactiques isolées de vins

    Directory of Open Access Journals (Sweden)

    Simone LAFON-LAFOURCADE

    1970-06-01

    Le comportement différent des bactéries lactiques vis-à-vis de l'acide L malique suivant la nature du test utilisé permet de supposer qu'il existe plusieurs sortes d'enzymes maliques d'activité, de localisation et de diffusion différentes ; il n'est pas exclu encore que la fermentation lactique de l'acide L malique puisse s'opérer par des voies différentes.

  8. The electronic structure of the lanthanides and actinides, a comparison

    International Nuclear Information System (INIS)

    Edelstein, N.M.

    1998-01-01

    Full text: Optical spectra of the two f-element series (the lanthanides and actinides) are comparable in many respects. For the trivalent ions isolated in single crystals, both series exhibit rich, narrow line spectra. These data can be analysed in terms of a parametric model based on a free-ion Hamiltonian plus the addition of a crystal field Hamiltonian. For most systems the agreement between the calculated and experimental energy levels is quite good. In the actinide series there appears to be a correlation between the magnitude of the crystal field and the inadequacy of the fits. The early actinides exhibit multiple oxidation states for which there is no precedent in the lanthanide series. The parametric model mentioned earlier has been utilized for some tetravalent actinide systems with reasonably good results. A selective survey of results describing the similarities and differences of various lanthanide and actinide systems will be given

  9. Actinide recovery from waste and low-grade sources

    International Nuclear Information System (INIS)

    Navratil, J.D.; Schulz, W.W.

    1982-01-01

    Actinide and nuclear fuel cycle operations generate a variety of process waste streams. New methods are needed to remove and recover actinides. More interest is also being expressed in recovering uranium from oceans, phosphoric acid, and other low grade sources. To meet the need for an up-to-date status report in the area of actinide recovery from waste and low grade sources, these papers were brought together. The papers provide an authoritative, in-depth coverage of an important area of nuclear and industrial and engineering chemistry which cover the following topics: uranium recovery from oceans and phosphoric acid; recovery of actinides from solids and liquid wastes; plutonium scrap recovery technology; and other new developments in actinide recovery processes

  10. Actinide-Aluminate Speciation in Alkaline Radioactive Waste

    International Nuclear Information System (INIS)

    Clark, David L.; Fedosseev, Alexander M.

    2001-01-01

    Investigation of behavior of actinides in alkaline media containing AL(III) showed that no aluminate complexes of actinides in oxidation states (IIII-VIII) were formed in alkaline solutions. At alkaline precipitation IPH (10-14) of actinides in presence of AL(III) formation of aluminate compounds is not observed. However, in precipitates contained actinides (IIV)<(VI), and to a lesser degree actinides (III), some interference of components takes place that is reflected in change of solid phase properties in comparison with pure components or their mechanical mixture. The interference decreases with rise of precipitation PH and at PH 14 is exhibited very feebly. In the case of NP(VII) the individual compound with AL(III) is obtained, however it is not aluminate of neptunium(VII), but neptunate of aluminium(III) similar to neptunates of other metals obtained earlier

  11. Direction des Publications

    African Journals Online (AJOL)

    Synthese

    Comportement à la corrosion de couches minces nano structurées. FexSiy, élaborées par ... Fe1-xSix thin films were obtained by DC magnetron sputtering on glass substrates. The alloys were prepared from pure Fe and Si targets. The alloys ...

  12. The radiological impact of actinides discharged to the Irish Sea

    International Nuclear Information System (INIS)

    Hunt, G.J.; Smith, B.D.

    1999-01-01

    This paper describes the radiological effects of releases of actinides to the Irish Sea from Sellafield, the major source. Exposure pathways to man since the commencement of discharges in 1952 are reviewed; the importance of actinides began to increase with increased discharges in the 1970s. With the demise of the porphyra/laverbread pathway due to transport difficulties, the pathway due to fish and shellfish consumption became critical, particularly for actinides through molluscan shellfish. A reassessment on the current basis of effective dose shows that peak exposures to the critical group of about 2 mSv yr -1 were received in the mid-1970s, about 30% of which was due to actinides. Effective doses have since reduced but the relative importance of actinides is greater, due to the interplay of discharges of radionuclides from Sellafield and their behaviour in the environment. Additive doses through sea food due to releases of natural radionuclides from the Marchon phosphate plant at Whitehaven are also considered, although the actinide component from this source has been small. Exposures due to actinides from Sellafield via other pathways are shown to be much lower than those involving sea food. Collective doses are also considered; these peaked at about 300 man-Sv to the European population (including the UK) in 1979, with only a few percent due to actinides. As in the case of critical group doses, the relative importance of actinides has increased in recent years within the decreasing total collective dose. For both critical group and collective doses, therefore, the actinide component needs to be kept under review. (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

  13. Les théories des mouvements sociaux et la dialectique des niveaux : un cadre d’analyse pour l’étude des évolutions d’Al-Qaïda au Maghreb islamique

    OpenAIRE

    Adib Bencherif

    2013-01-01

    Les théories des mouvements sociaux sont de plus en plus utilisées pour étudier les groupes terroristes. Elles comportent différents niveaux d’analyse: les niveaux macro-analytique, méso-analytique et micro-analytique. Le présent article tente d’adapter ce corpus théorique à l’étude du groupe jihadiste Al-Qaïda au Maghreb islamique (AQMI). En effet, au cours des dernières années, AQMI ne s’est pas développé au Maghreb alors que ses activités ont augmenté exponentiellement dans la région sahél...

  14. Modelling the hydro-mechanical behaviour of swelling unsaturated soils; Modelisation du comportement hydromecanique des sols gonflants non satures

    Energy Technology Data Exchange (ETDEWEB)

    Mrad, M

    2005-10-15

    The use of compacted swelling soils in engineering practice is very widely spread, especially in geotechnical and environmental engineering. After their setup, these materials are likely to be subject to complex suction/stress paths involving significant variations of their hydro-mechanical properties which can affect their initial behaviour. It is important to be able to predict the hydro-mechanical behaviour of these materials taking into account the significant applications for which they are intended. Barcelona team developed a finite-element code (Code-Bright) for the thermo-hydro-mechanical coupling (THM) integrating the BBM elastoplastic model for unsaturated soils based on the independent variables approach. This model is recognized to correctly describe the hydro-mechanical behaviour of unsaturated soils but fails to take into account some particular observed aspects on swelling soils. A second model BExM was then proposed to address these aspects. The objective of this study is: (i) to implement the elastoplastic model BExM for the unsaturated swelling soils in the finite-element code (Code-Bright); (ii) to check the numerical model validity through the numerical simulation of laboratory tests made on swelling soils; and (iii) to apply this model to some practical problems. For this purpose, a new family of numerical procedures adapted to the BExM model was introduced into the code. The equation of the yield surface of this model for a given deviatoric stress states was given in a manner to facilitate calculations of its derivatives. The model was checked by the numerical simulation of suction-controlled odometric tests made on three different swelling soils. The simulation results showed that the numerical model is able to correctly reproduce the experimental data. Lastly, the model was applied to two practical problems: radioactive waste repository in deep geological layers and a shallow footing under the action of a swelling soil. The results obtained showed the ability of the numerical model to modeling hydro-mechanical coupled problems. (author)

  15. Temperature effect on the behaviour of engineered clay barriers; Effet de la temperature sur le comportement des barrieres de confinement

    Energy Technology Data Exchange (ETDEWEB)

    Tang, A.M

    2005-11-15

    The present work deals with the thermo-hydro-mechanical behaviour of compacted swelling clay used for engineered barriers in high-level radioactive repositories. The MX80 bentonite was chosen for this work. Firstly, an experimental work on the thermal conductivity of the compacted bentonite was performed. The results evidenced the effects of dry density, water content, volumetric fraction of soil components, microstructure, and mineralogy. This experimental work gave rise to the proposition of a theoretical model for estimate the thermal conductivity of compacted bentonites. Secondly, after a calibration of suction generated by saturated saline solution in function of temperature, water retention curves were determined at different temperatures. The experimental results showed a decrease of the water retention capacity of soil after heating. A simple model based on the interfacial tension air-water was formulated to simulate this effect. Thirdly, a new isotropic cell enabling a simultaneous control of suction, temperature and mechanical stress was developed. With this new cell, an experimental work on the thermo-mechanical behaviour of the unsaturated compacted bentonite was performed. Finally, a constitutive model was developed for simulate the thermo-hydro-mechanical behaviours obtained experimentally. (author)

  16. Influence of defects on the vibrations of rotating systems; Influence de defauts sur le comportement vibratoire des systemes tournants

    Energy Technology Data Exchange (ETDEWEB)

    Lazarus, A. [CEA Saclay, Dept. Modelisation de Systemes et Structures (DEN/DANS/DM2S/SEMT), 91 - Gif sur Yvette (France)

    2008-07-01

    For high rotation speeds, the imperfections (cracks, anisotropy...) of rotating machinery of the energy sector lead to a specific vibratory behavior which can damage the machine. The simulation of rotating machinery are usually realized for systems without defect. The aim of this thesis is to understand the influence of defects and to propose an algorithm to predict the dynamical behavior. In a first part the author studies the simplified rotating oscillators to propose a numerical method in order to taking into account the dynamic of these systems. This method is then applied to real rotating machinery with the Cast3m software. The numerical results are validated with experiments. (A.L.B.)

  17. Comportements spatio-temporels des touristes dans la région de Québec

    OpenAIRE

    Kercuku, Hava

    2009-01-01

    La pratique du tourisme urbain est un facteur important pour le développement économique et spatial de nombreuses villes et régions dans le monde. Cependant de nouvelles destinations et de nouvelles pratiques émergent constamment. D’une part, l’offre touristique urbaine se modifie et se diversifie constamment, et d’autre part, les pratiques touristiques se renouvellent, s’entrecroisent et se ressemblent en cherchant toujours plus, plus vite et plus personnalisé. La région touristique de Québe...

  18. Environmental mineralogy - Understanding element behavior in ecosystems; Mineralogie environnementale: comprendre le comportement des elements dans les ecosystemes

    Energy Technology Data Exchange (ETDEWEB)

    Brown Jr, G.E. [Department of Geological and Environmental Sciences, Stanford University, Stanford, CA 94305-2115 (United States); Department of Photon Science and Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, Menlo Park, CA 94025 (United States); Calas, G. [Institut de mineralogie et de physique des milieux condenses (IMPMC), universite Paris-6 - universite Paris-7, IPGP, CNRS, case 115, 75252 Paris (France)

    2011-02-15

    Environmental Mineralogy has developed over the past decade in response to the recognition that minerals are linked in many important ways with the global ecosystem. Minerals are the main repositories of the chemical elements in Earth's crust and thus are the main sources of elements needed for the development of civilization, contaminant and pollutant elements that impact global and local ecosystems, and elements that are essential plant nutrients. These elements are released from minerals through natural processes, such as chemical weathering, and anthropogenic activities, such as mining and energy production, agriculture and industrial activities, and careless waste disposal. Minerals also play key roles in the biogeochemical cycling of the elements, sequestering elements and releasing them as the primary minerals in crustal rocks undergo various structural and compositional transformations in response to physical, chemical, and biological processes that produce secondary minerals and soils. These processes have resulted in the release of toxic elements such as arsenic in groundwater aquifers, which is having a major impact on the health of millions of people in South and Southeast Asia. The interfaces between mineral surfaces and aqueous solutions are the locations of most chemical reactions that control the composition of the natural environment, including the composition of natural waters. The nuclear fuel cycle, from uranium mining to the disposition of high-level nuclear waste, is also intimately related to minerals. A fundamental understanding of these processes requires molecular-scale information about minerals, their bulk structures and properties such as solubility, their surfaces, and their interactions with aqueous solutions, atmospheric and soil gases, natural organic matter, and biological organisms. Gaining this understanding is further complicated by the presence of natural, incidental, and manufactured nano-particles in the environment, which are becoming increasingly important due to the rapidly developing field of nano-technology. As a result of this complexity, Environmental Mineralogy requires the use of the most modern molecular-scale analytical and theoretical methods and overlaps substantially with closely related fields such as Environmental Sciences, low-temperature Geochemistry, and Geo-microbiology. This paper provides brief overviews of the above topics and discusses the complexity of minerals, natural vs. anthropogenic inputs of elements and pollutants into the biosphere, the role of minerals in the biogeochemical cycling of elements, natural nano-particles, and the Environmental Mineralogy of three major potential pollutant elements (Hg, As and U). (authors)

  19. Wastes behavior and environmental impacts, researches and methods; Comportement des dechets et impacts environnementaux, recherches et methodes

    Energy Technology Data Exchange (ETDEWEB)

    Labeyrie, J; Chateau, L [Agence de l' Environnement et de la Maitrise de l' Energie, (ADEME), 49 - Angers (France); Gin, St [CEA/VALRHO - site de Marcoule, Dept. de Recherche en Retraitement et en Vitrification DRRV, 30 - Marcoule (France); and others

    2001-07-01

    The wastes management policy takes into account more and more often the environmental impacts mastership. This evolution is particularly appreciable when the wastes directly interact with the environment: storage, utilization for roads construction and so on. In this context the ADEME organized the 8 june 2000 a colloquium to present the new evaluation methods and tools, to describe the regulations and to identify the research programs needed for this environmental policy. Eleven papers are presented. (A.L.B.)

  20. Recycle of LWR actinides to an IFR

    International Nuclear Information System (INIS)

    Pierce, R.D.; Ackerman, J.P.; Johnson, G.K.; Mulcahey, T.P.; Poa, D.S.

    1991-01-01

    Large quantities of actinide elements are present in irradiated light water reactor fuel that is stored throughout the world. Because of the high fission to capture ratio for the transuranium (TRU) elements with the high energy neutrons in metal-fueled integral fast reactors (IFR), that reactor can consume these elements effectively. The stored fuel may represent valuable resource for the expanding application of fast power reactors. In addition, the removal of TRU elements from spent LWR fuel has the potential for increasing the capacity of high level waste facilities by reducing the heat load and may increase the margin of safety in meeting licensing requirement. Argonne National Laboratory is developing a pyrochemical process, which is compatible with the IFR fuel cycle for the recovery of TRU elements from LWR fuel. The proposed product is a metallic actinide ingot, which can be introduced into the electrorefining step of the IFR process. Two pyrochemical processes, that is, salt transport process and blanket processing study, are discussed in this paper. Also the experimental studies are reported. (K.I.)

  1. Subcritical limits for special fissile actinides

    International Nuclear Information System (INIS)

    Clark, H.K.

    1980-01-01

    Critical masses and subcritical mass limits in oxide-water mixtures were calculated for actinide nuclides other than 233 U, 235 U, and 239 Pu that have an odd number of neutrons in the nucleus: S/sub n/ transport theory was used together with cross sections, drawn from the GLASS multigroup library, developed to provide accurate forecasts of actinide production at Savannah River. The subcritical limits are 201 g for 241 Pu, 13 g for 242 /sup m/Am, 90 g for 243 Cm, 30 g for 245 Cm, 900 g for 247 Cm, 10 g for 249 Cf, and 5 g for 251 Cf. Association of 241 Pu with an equal mass of 240 Pu increases the 241 Pu limit to a value greater than that for pure 239 Pu. Association of 242 /sup m/Am with 241 Am increases the limit for the mixture to that for dry, theoretical density AmO 2 at isotopic concentrations of 242 /sup m/Am less than approx. 6%. Association of 245 Cm with 244 Cm increases the limit according to the formula 30 + 0.3 244 Cm/ 245 Cm up to the limit for dry CmO 2 . A limiting mass of 8.15 kg for plutonium containing at least 67% 238 Pu as oxide was calculated that applies (provided 240 Pu exceeds 241 Pu) with no limit on moderation. 1 figure, 5 tables

  2. The dose from actinides in the environment

    International Nuclear Information System (INIS)

    Harley, Naomi H.; Pasternack, Bernard S.

    1978-01-01

    We attempt to evaluate the health effects on local populations from the nuclear power industry. The nuclides which are thought to be most hazardous are the long-lived, alpha-emitting isotopes of plutonium, americium and curium. These long-lived alpha emitters will almost certainly be dispersed in the environment during fuel reprocessing. Their effect is local, not global and at worst a single community could be affected. The most important pathway for exposure to the actinides is through inhalation following resuspension of contaminated soil particles. The most important alpha dose estimates are to cells in bronchial epithelium and cells on bone surfaces. These alpha dose estimates are calculated for a dispersal which contaminates soil with 1 pCi/g of each of the nuclides Pu 238,239 , Am 241 , Cm 242,244 . These bronchial and bone cell dose estimates are compared with those from the naturally occurring actinide 232 Th (and daughters) which are normally found in soil at a level of about 1 pCi/g. (author)

  3. Consistent biokinetic models for the actinide elements

    International Nuclear Information System (INIS)

    Leggett, R.W.

    2001-01-01

    The biokinetic models for Th, Np, Pu, Am and Cm currently recommended by the International Commission on Radiological Protection (ICRP) were developed within a generic framework that depicts gradual burial of skeletal activity in bone volume, depicts recycling of activity released to blood and links excretion to retention and translocation of activity. For other actinide elements such as Ac, Pa, Bk, Cf and Es, the ICRP still uses simplistic retention models that assign all skeletal activity to bone surface and depicts one-directional flow of activity from blood to long-term depositories to excreta. This mixture of updated and older models in ICRP documents has led to inconsistencies in dose estimates and interpretation of bioassay for radionuclides with reasonably similar biokinetics. This paper proposes new biokinetic models for Ac, Pa, Bk, Cf and Es that are consistent with the updated models for Th, Np, Pu, Am and Cm. The proposed models are developed within the ICRP's generic model framework for bone-surface-seeking radionuclides, and an effort has been made to develop parameter values that are consistent with results of comparative biokinetic data on the different actinide elements. (author)

  4. Burning minor actinides in a HTR energy spectrum

    International Nuclear Information System (INIS)

    Pohl, Christoph; Rütten, H. Jochem

    2012-01-01

    Highlights: ► Burn-up analysis for varying plutonium/minor actinide fuel compositions. ► The influence of varying heavy metal fuel element loads is investigated. ► Significant burn-up via radiative capture and subsequently fission is observed. ► Difference observed between fuel element burn-up and total actinide burning rate. - Abstract: The generation of nuclear energy by means of the existing nuclear reactor systems is based mainly on the fission of U-235. But this comes along with the capture of neutrons by the U-238 faction and results in a build-up of plutonium isotopes and minor actinides as neptunium, americium and curium. These actinides are dominant for the long time assessment of the radiological risk of a final disposal therefore a minimization of the long living isotopes is aspired. Burning the actinides in a high temperature helium cooled graphite moderated reactor (HTR) is one of these options. The use of plutonium isotopes to sustain the criticality of the system is intended to avoid on the one hand highly enriched uranium because of international regulations and on the other hand low enriched uranium because of the build up of new actinides from neutron capture in the U-238 fraction. Because initial minor actinide isotopes are typically not fissionable by thermal neutrons the idea is to fission instead the intermediate isotopes generated by the first neutron capture. This paper comprises calculations for plutonium/minor actinides/thorium fuel compositions and their correlated final burn-up for a generic pebble bed HTR based on the reference design of the 400 MW PBMR. In particular the cross sections and the neutron balance of the different minor actinide isotopes in the higher thermal energy spectrum of a HTR will be discussed. For a fuel mixture of plutonium and minor actinides a significant burn-up of these actinides up to 20% can be achieved but at the expense of a higher residual fraction of plutonium in the burned fuel. Combining

  5. Contribution to the study of can deformations in the fuel elements of gas-graphite reactors during thermal cycling; Contribution a l'etude des deformations des gaines des elements combustibles de reacteur graphite-gaz au cours du cyclage thermique

    Energy Technology Data Exchange (ETDEWEB)

    Gauthron, M; Boudouresques, B; Delpeyroux, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The cans of fuel cartridges used in reactors of the gas-graphite type have either longitudinal fins of variable thickness, short herring-bone fins, or else a mixture of the two. An important test of the strength of these cartridges is their behaviour during thermal cycling carried out in cells reproducing in-pile conditions. It has been observed during with rapid cooling that there occurs a shortening at the base of the fins which can be accompanied in particular by a compression effect at the fin type, which has a tendency to curl, and by a tractive force acting on the body of the can at the ends of the longitudinal fins; this last phenomenon can result in a fracturing of the welds at the extremities or of the ends of the cartridge. This report presents first of all the way in which the stress diagram can be drawn for a can touching the fuel, and then the effect of the ratchet along a fin fixed to a bar with or without grooves. Finally the importance is shown of the test cycling variables (temperature, heating and cooling rates). (authors) [French] Les gaines des cartouches combustibles des reacteurs de la filiere graphite-gaz comportent soit des ailettes longitudinales plus ou moins epaisses, soit de courtes ailettes a chevrons, soit un ensemble des deux. Un test important de la tenue des cartouches, est la tenue au cyclage thermique en cellule pour reproduire le comportement en pile. On a observe au cours des cyclages a refroidissement rapide, un raccourcissement a la base des ailettes qui peut s'accompagner notamment d'une mise en compression du sommet de l'ailette qui a tendance a friser, et d'une traction exercee sur le corps des gaines au bout des ailettes longitudinales; ce dernier phenomene peut se traduire par des ruptures de soudures d'extremites ou des parties terminales de la cartouche. Ce rapport presente d'abord la maniere dont peut etre trace le diagramme des contraintes dans une gaine liee au combustible, puis l'effet du rochet le long d

  6. Contribution to the study of the thermodynamic properties of solutions using their phase diagrams (1961); Contribution au calcul des proprietes thermodynamiques des solutions a partir des diagrammes de phases (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Hagege, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-10-15

    The thermodynamic study of the behaviour of solutions is of great interest in applied metallurgical problems, since the use of physical phenomena (solubility or volatility, for example) makes it possible to effect chemical reactions which, would not take place if the products formed did not mix. It is interesting to be able to predict this behaviour, at least for binary systems, using a knowledge of the phase diagrams. After showing the theoretical impossibility of resolving this problem without further data, an attempt is made to show what can be calculated from a knowledge of the phase diagrams: on the one hand it is possible to study the coherence between different types of data (calorimetric or equilibrium); on the other hand can be calculated the 'model' parameters, whether they be empirical, or statistically derived, and their validity can be checked. (author) [French] L'etude thermodynamique du comportement des solutions presente un grand interet dans les problemes de metallurgie appliquee puisque l'emploi de phenomenes physiques (solubilite ou volatilisation par exemple) permet de realiser des reactions chimiques qui seraient irrealisables si les produits formes ne se melangeaient pas. Il semble tres interessant de pouvoir prevoir ce comportement, tout au moins dans le cas de systemes binaires, a partir de la connaissance des diagrammes de phases. Apres avoir montre l'impossibilite theorique de resoudre ce probleme sans autres donnees, on essaie de voir ce que permet de calculer la connaissance des diagrammes de phases: d'une part, on peut etudier la coherenc entre divers types de donnees (calorimetrique ou d'equilibre); d'autre-part, on peut calculer les parametres de 'modeles', qu'ils soient empiriques ou a base statistique, et verifier leur validite. (auteur)

  7. CARACTERISATION DE RESEAUX DE POLYMERES RETICULES ACRYLIQUES ETUDE DE L’INFLUENCE DES PARAMETRES DE PH DES SOLVANTS ET DE TEMPERATURE

    OpenAIRE

    HAMRI, Salah

    2009-01-01

    La préparation des solutions de PH différents, ainsi que la synthèse des réseaux de poly(acrylate de nbutyle)( PABu) et de poly(acrylate de 2-éthylhexyl)(PEHA), par photo polymérisation, constitue la première étape de notre travail, Le comportement de gonflement de réseaux réticulés acryliques l’ABu et l’EHA a été étudié en fonction de trois paramètres : le PH du milieu, le taux de réticulation et la température, Suivant les courbes que nous ayons obtenues, l’influence du PH reste...

  8. End point control of an actinide precipitation reactor

    International Nuclear Information System (INIS)

    Muske, K.R.

    1997-01-01

    The actinide precipitation reactors in the nuclear materials processing facility at Los Alamos National Laboratory are used to remove actinides and other heavy metals from the effluent streams generated during the purification of plutonium. These effluent streams consist of hydrochloric acid solutions, ranging from one to five molar in concentration, in which actinides and other metals are dissolved. The actinides present are plutonium and americium. Typical actinide loadings range from one to five grams per liter. The most prevalent heavy metals are iron, chromium, and nickel that are due to stainless steel. Removal of these metals from solution is accomplished by hydroxide precipitation during the neutralization of the effluent. An end point control algorithm for the semi-batch actinide precipitation reactors at Los Alamos National Laboratory is described. The algorithm is based on an equilibrium solubility model of the chemical species in solution. This model is used to predict the amount of base hydroxide necessary to reach the end point of the actinide precipitation reaction. The model parameters are updated by on-line pH measurements

  9. On the suitability of lanthanides as actinide analogs

    International Nuclear Information System (INIS)

    Raymond, Kenneth; Szigethy, Geza

    2008-01-01

    With the current level of actinide materials used in civilian power generation and the need for safe and efficient methods for the chemical separation of these species from their daughter products and for long-term storage requirements, a detailed understanding of actinide chemistry is of great importance. Due to the unique bonding properties of the f-elements, the lanthanides are commonly used as structural and chemical models for the actinides, but differences in the bonding between these 4f and 5f elements has become a question of immediate applicability to separations technology. This brief overview of actinide coordination chemistry in the Raymond group at UC Berkeley/LBNL examines the validity of using lanthanide analogs as structural models for the actinides, with particular attention paid to single crystal X-ray diffraction structures. Although lanthanides are commonly accepted as reasonable analogs for the actinides, these comparisons suggest the careful study of actinide materials independent of their lanthanide analogs to be of utmost importance to present and future efforts in nuclear industries. (authors)

  10. Actinide separation chemistry in nuclear waste streams and materials

    International Nuclear Information System (INIS)

    1997-12-01

    The separation of actinide elements from various waste materials, produced either in nuclear fuel cycles or in past nuclear weapons production, represents a significant issue facing developed countries. Improvements in the efficiencies of the separation processes can be expected to occur as a result of better knowledge of the elements in these complex matrices. The Nuclear Science Committee of the OECD/NEA has established a task force of experts in actinide separation chemistry to review current and developing separation techniques and chemical processes. The report consist of eight chapters. In Chapter 1 the importance of actinide separation chemistry in the fields of waste management and its background are summarized.In Chapter 2 the types of waste streams are classified according to their relative importance, by physical form and by source of actinides. The basic data of actinide chemical thermodynamics, such as oxidation states, hydrolysis, complexation, sorption, Gibbs energies of formation, and volatility, were collected and are presented in Chapter 3. Actinide analyses related to separation processes are also mentioned in this chapter. The state of the art of actinide separation chemistry is classified in three groups, including hydrometallurgy, pyrochemical process and process based on fields, and is described in Chapter 4 along with the relationship of kinetics to separations. In Chapter 5 basic chemistry research needs and the inherent limitation on separation processes are discussed. Prioritization of research and development is discussed in Chapter 6 in the context of several attributes of waste management problems. These attributes include: mass or volume of waste; concentration of the actinide in the waste; expected difficulty of treating the wastes; short-term hazard of the waste; long-term hazard of the waste; projected cost of treatment; amount of secondary waste. Based on the priority, recommendations were made for the direction of future research

  11. Actinide separation chemistry in nuclear waste streams and materials

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    The separation of actinide elements from various waste materials, produced either in nuclear fuel cycles or in past nuclear weapons production, represents a significant issue facing developed countries. Improvements in the efficiencies of the separation processes can be expected to occur as a result of better knowledge of the elements in these complex matrices. The Nuclear Science Committee of the OECD/NEA has established a task force of experts in actinide separation chemistry to review current and developing separation techniques and chemical processes. The report consist of eight chapters. In Chapter 1 the importance of actinide separation chemistry in the fields of waste management and its background are summarized.In Chapter 2 the types of waste streams are classified according to their relative importance, by physical form and by source of actinides. The basic data of actinide chemical thermodynamics, such as oxidation states, hydrolysis, complexation, sorption, Gibbs energies of formation, and volatility, were collected and are presented in Chapter 3. Actinide analyses related to separation processes are also mentioned in this chapter. The state of the art of actinide separation chemistry is classified in three groups, including hydrometallurgy, pyrochemical process and process based on fields, and is described in Chapter 4 along with the relationship of kinetics to separations. In Chapter 5 basic chemistry research needs and the inherent limitation on separation processes are discussed. Prioritization of research and development is discussed in Chapter 6 in the context of several attributes of waste management problems. These attributes include: mass or volume of waste; concentration of the actinide in the waste; expected difficulty of treating the wastes; short-term hazard of the waste; long-term hazard of the waste; projected cost of treatment; amount of secondary waste. Based on the priority, recommendations were made for the direction of future research

  12. Developpement d'une methode calorimetrique de mesure des pertes ac pour des rubans supraconducteurs a haute temperature critique

    Science.gov (United States)

    Dolez, Patricia

    supraconductrice qui restent fixes a l'interface coeur-enveloppe, et le revetement en alliage d'argent. L'interet d'une methode calorimetrique par rapport a la technique electrique, plus rapide, plus sensible et maintenant fiable, reside dans la possibilite de realiser des mesures de pertes ac dans des environnements complexes, reproduisant la situation presente par exemple dans un cable de transport d'energie ou dans un transformateur. En particulier, la superposition d'un courant dc en plus du courant ac habituel nous a permis d'observer experimentalement, pour la premiere fois a notre connaissance, un comportement particulier des pertes ac en fonction de la valeur du courant dc decrit theoriquement par LeBlanc. Nous avons pu en deduire la presence d'un courant d'ecrantage Meissner de 16 A, ce qui nous permet de determiner les conditions dans lesquelles une reduction du niveau de pertes ac pourrait etre obtenue par application d'un courant dc, phenomene denomme "vallee de Clem".

  13. Process for denitrating waste solutions containing nitrates and actinides with simultaneous separation of the actinides

    International Nuclear Information System (INIS)

    Gompper, K.

    1986-01-01

    The invention is intended to reduce the acid and nitrate content of nitrate waste solutions, to reduce the total salt content of the waste solution, to remove the actinides contained in it by precipitation, without any danger of violent reactions or an increase in the volume of the waste solution. The invention achieves this by mixing the waste solution with diethyl oxalate at room temperature and heating the mixture to at least 80 0 C. (orig./PW) [de

  14. General survey of applications which require actinide nuclear data

    International Nuclear Information System (INIS)

    Raman, S.

    1976-01-01

    This review paper discusses the actinide waste problem, the buildup of toxic isotopes in the fuel, the neutron activity associated with irradiated fuel, the 252 Cf buildup problem, and the production of radioisotope power sources as broad areas that require actinide cross-section data. Decay data enter into the area of radiological safety and health physics. This paper also discusses a few cross-section measurements in progress at the Oak Ridge Electron Linear Accelerator. The availability of actinide samples through the Transuranium Program at Oak Ridge is discussed in considerable detail. The present data status with respect to the various applications is reviewed along with recommendations for improving the data base

  15. Review of actinide nitride properties with focus on safety aspects

    Energy Technology Data Exchange (ETDEWEB)

    Albiol, Thierry [CEA Cadarache, St Paul Lez Durance Cedex (France); Arai, Yasuo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2001-12-01

    This report provides a review of the potential advantages of using actinide nitrides as fuels and/or targets for nuclear waste transmutation. Then a summary of available properties of actinide nitrides is given. Results from irradiation experiments are reviewed and safety relevant aspects of nitride fuels are discussed, including design basis accidents (transients) and severe (core disruptive) accidents. Anyway, as rather few safety studies are currently available and as many basic physical data are still missing for some actinide nitrides, complementary studies are proposed. (author)

  16. Minor Actinide Laboratory at JRC-ITU: Fuel fabrication facility

    International Nuclear Information System (INIS)

    Fernandez, A.; McGinley, J.; Somers, J.

    2008-01-01

    The Minor Actinide Laboratory (MA-lab) of the Institute for Transuranium Elements is a unique facility for the fabrication of fuels and targets containing minor actinides (MA). It is of key importance for research on Partitioning and Transmutation in Europe, as it is one of the only dedicated facilities for the fabrication of MA containing materials, either for property measurements or for the production of test pins for irradiation experiments. In this paper a detailed description of the MA-Lab facility and the fabrication processes developed to fabricate fuels and samples containing high content of minor actinides is given. In addition, experience gained and improvements are also outlined. (authors)

  17. Status report on actinide and fission product transmutation studies

    International Nuclear Information System (INIS)

    1997-06-01

    The management of radioactive waste is one of the key issues in today's political and public discussions on nuclear energy. One of the fields that looks into the future possibilities of nuclear technology is the neutronic transmutation of actinides and of some most important fission products. Studies on transmutation of actinides are carried out in various countries and at an international level. This status report which gives an up-to-date general overview of current and planned research on transmutation of actinides and fission products in non-OECD countries, has been prepared by a Technical Committee meeting organized by the IAEA in September 1995. 168 refs, 16 figs, 34 tabs

  18. Report of the panel on practical problems in actinide biology

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    Practical problems are classified as the need to make operational decisions, the need for regulatory assessment either of individual facilities or of generic actions, and the overt appearance of radiobiological effects in man or radioactivity in man or the environment. Topics discussed are as follows: simulated reactor accident; long term effects of low doses; effects of repeated exposures to actinides; inhaled uranium mine air contaminants; metabolism and dosimetry; environmental equilibrium models; patterns of alpha dosimetry; internal dose calculations; interfaces between actinide biology and environmental studies; removal of actinides deposited in the body; and research needs related to uranium isotopes

  19. Critical masses for the even-neutron-numbered transuranium actinides

    International Nuclear Information System (INIS)

    Westfall, R.M.

    1981-01-01

    As part of a standards effort of the American Nuclear Society to establish subcritical mass limits for the transuranium actinides, critical masses were calculated for seven actinides, critical masses were calculated for seven actinide elements in bare, water-reflected, and steel-reflected metal systems. For the nuclides /sup 242/Pu and /sup 241/Am, values obtained with ENDF/B-V cross-section data were in much better agreement with values inferred from experimental measurement than were initial values calculated with ENDF/B-IV data. A brief description of the analytical methods employed is followed by a presentation of the results. 10 refs

  20. Actinide and Xenon reactivity effects in ATW high flux systems

    International Nuclear Information System (INIS)

    Woosley, M.; Olson, K.; Henderson, D.L.

    1995-01-01

    In this paper, initial system reactivity response to flux changes caused by the actinides and xenon are investigated separately for a high flux ATW system. The maximum change in reactivity after a flux change due to the effect of the changing quantities of actinides is generally at least two orders of magnitude smaller than either the positive or negative reactivity effect associated with xenon after a shutdown or start-up. In any transient flux event, the reactivity response of the system to xenon will generally occlude the response due to the actinides