WorldWideScience

Sample records for components life evaluation

  1. Development of life evaluation technology for nuclear power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin [Sungkyunkwan Univ., Seoul (Korea, Republic of); Kwon, J. D. [Yeungnam Univ., Gyeongsan (Korea, Republic of); Kang, K. J. [Chonnam National Univ., Gwangju (Korea, Republic of)] (and others)

    2001-03-15

    This research focuses on development of reliable life evaluation technology for nuclear power plant (NPP) components, and is divided into two parts, development of life evaluation systems for pressurized components and evaluation of applicability of emerging technology to operating plants. For the development of life evaluation system for nuclear pressure vessels, the following seven topics are covered: development of expert systems for integrity assessment of pressurized components, development of integrity evaluation systems of steam generator tubes, prediction of failure probability for NPP components based on probabilistic fracture mechanics, development of fatigue damage evaluation technique for plant life extension, domestic round robin analysis for pressurized thermal shock of reactor vessels, domestic round robin analysis of constructing P--T limit curves for reactor vessels, and development of data base for integrity assessment. For evaluation of applicability of emerging technology to operating plants, on the other hand, the following eight topics are covered: applicability of the Leak-Before-Break analysis to Cast S/S piping, collection of aged material tensile and toughness data for aged Cast S/S piping, finite element analyses for load carrying capacity of corroded pipes, development of Risk-based ISI methodology for nuclear piping, collection of toughness data for integrity assessment of bi-metallic joints, applicability of the Master curve concept to reactor vessel integrity assessment, measurement of dynamic fracture toughness, and provision of information related to regulation and plant life extension issues.

  2. Development of life evaluation technology for nuclear power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Kim, Yun Jae; Choi, Jae Boong [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2002-03-15

    This project focuses on developing reliable life evaluation technology for nuclear power plant components, and is divided into two parts, development of a life evaluation system for nuclear pressure vessels and evaluation of applicability of emerging technology to operating plants. For the development of life evaluation system for nuclear pressure vessels, the following seven topics are covered in this project: defect assessment method for steam generator tubes, development of fatigue monitoring system, assessment of corroded pipes, domestic round robin analysis for constructing P-T limit curve for RPV, development of probabilistic integrity assessment technique, effect of aging on strength of dissimilar welds, applicability of LBB to cast stainless steel, and development of probabilistic piping fracture mechanics.

  3. System, structure, and component evaluation for life-cycle management

    International Nuclear Information System (INIS)

    Hanley, N.E.; Banerjee, A.K.; Woods, P.B.; Perrin, J.S.; Marian, F.A.

    1992-01-01

    In recent years, many nuclear organizations and utilities have studied the possibility of extending the service life of nuclear power plants beyond the original license period. From these studies, recommendations have resulted for maintaining the option of future decisions concerning operating license renewal. Several of the recommendations are considered beneficial to the management and operation of nuclear plants in meeting many of their near-term goals. In 1986, Public Service Electric and Gas (PSE and G) concluded that a full-scale nuclear plant license renewal program for their Salem 1 and 2 and Hope Creek nuclear stations was not cost-effective at that time. Rather, it would be better served if the nuclear plant life extension (PLEX) option were maintained for future consideration. To help plan for the life extension option, a strategic 5-yr life cycle management (LCM) program was begun. In support of the LCM program, evaluations for the following Salem structures and components were performed: (1) intake structures, (2) reactor vessel support, (3) containment liner, and (4) containment structure (below grade). This paper discusses the systems, structures, and components (SSC) evaluation methodology and, as an example, discusses the evaluation performed for reactor vessel support

  4. Evaluation of operating experience for service life of components

    International Nuclear Information System (INIS)

    Schulz, H.; Sunder, R.

    1987-01-01

    The evaluation of the operating experience of German light-water reactor components based on licensee event reports indicates that a large part of the defects and failures are caused by fatigue and/or corrosion type mechanisms. Actions have been taken to eliminate the causes by redesigning systems, replacement of components and change of operating procedures. The interaction of fatigue and corrosion mechanisms are not understood in all details today, further research is still necessary. To establish a more realistic data base of the local loading and water chemistry condition for all loading conditions the application of advanced monitoring systems is proposed. The benefits of these systems are that the operating procedures can be further optimized, the actual used life time fraction can be calculated regularly and the data base can be used for life time extension. (orig.) [de

  5. Development of life evaluation technology for nuclear power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Song, Sung Jin; Kim, Young Hwan; Shin, Hyun Jae [Sungkwunkwan Univ., Seoul (Korea, Republic of); Lee, Hyang Beom [Soongsil Univ., Seoul (Korea, Republic of); Shin, Young Kil [Kunsan National Univ., Gunsan (Korea, Republic of); Chung, Hyun Jo [Wonkwang Univ., Iksan (Korea, Republic of); Park, Ik Keun; Park, Eun Soo [Seoul National University of Technology, Seoul (Korea, Republic of)

    2001-03-15

    Retaining reliabilities of nondestructive testing is essential for the life-time maintenance of nuclear power plant. In order to Improve reliabilities of ultrasonic testing and eddy current testing, the following five subjects were carried out in this study: development of BEM analysis technique for ECT of SG tube, development of neural network technique for the intelligent analysis of ECT flaw signals of SG tubes, development of RFECT technology for the inspection of SG tube, FEM analysis of ultrasonic scattering field and evaluation of statistical reliability of PD-RR test of ultrasonic testing. As results, BEM analysis of eddy current signal, intelligent analysis of eddy current signal using neural network, and FEM analysis of remote field eddy current testing have been developed for the inspection of SG tubes. FEM analysis of ultrasonic waves in 2-dimensional media and evaluation of statistical reliability of ultrasonic testing with PD-RR test also have been carried out for the inspection of weldments. Those results can be used to Improve reliability of nondestructive testing.

  6. Development of life evaluation technology for nuclear power plant components

    International Nuclear Information System (INIS)

    Song, Sung Jin; Kim, Young Hwan; Shin, Hyun Jae; Lee, Hyang Beom; Shin, Young Kil; Chung, Hyun Jo; Park, Ik Keun; Park, Eun Soo

    2001-03-01

    Retaining reliabilities of nondestructive testing is essential for the life-time maintenance of nuclear power plant. In order to Improve reliabilities of ultrasonic testing and eddy current testing, the following five subjects were carried out in this study: development of BEM analysis technique for ECT of SG tube, development of neural network technique for the intelligent analysis of ECT flaw signals of SG tubes, development of RFECT technology for the inspection of SG tube, FEM analysis of ultrasonic scattering field and evaluation of statistical reliability of PD-RR test of ultrasonic testing. As results, BEM analysis of eddy current signal, intelligent analysis of eddy current signal using neural network, and FEM analysis of remote field eddy current testing have been developed for the inspection of SG tubes. FEM analysis of ultrasonic waves in 2-dimensional media and evaluation of statistical reliability of ultrasonic testing with PD-RR test also have been carried out for the inspection of weldments. Those results can be used to Improve reliability of nondestructive testing

  7. Study on fatigue life evaluation of structural component based on crack growth criterion

    International Nuclear Information System (INIS)

    Shibata, Katsuyuki

    1984-07-01

    As one of the practical application of fracture mechanics, fatigue life evaluation method based on crack growth criterion has been diffusing in various field of technology in order to determine the rational and reliable life of structural components. The fatigue life by this method is evaluated based on the fatigue crack growth analysis from defects, while many problems, such as the influence of residual stress on the crack growth behavior, the effect of overloading, and evaluation method for multiple surface cracks, are not sufficiently solved yet. In this paper, the above problems are treated, and based on some exprimental data some simple mehtods for fatigue life evaluation are proposed regarding the above problems. Verification of the proposed methods are shown in the paper by comparing with some experimental results, and the applicability of the proposed method is also examined by the fatigue test of pipes with cracks in the inner surface. (author)

  8. A procedure for evaluating residual life of major components in light water reactors

    International Nuclear Information System (INIS)

    Uchida, S.; Fujimori, H.; Ibe, E.; Kuniya, J.; Hayashi, M.; Fuse, M.; Yamauchi, K.

    1995-01-01

    A computer program for evaluating residual life of major components in boiling water reactors is proposed. It divides the stress corrosion cracking process into two stages; a probabilistic crack generation stage and a deterministic crack propagation one. The minimum period of the crack generation stage is evaluated assuming an exponential distribution of the stage. The crack propagation rate is calculated by the slip-dissolution/film-rupture model. The neutron flux and fluence dependence of the neutron radiation effects on material properties was evaluated by using theoretical models of radiation damage. The computer program works on an engineering work station. Evaluated results are displayed as a map of the residual life, or as graphs of crack length evolution

  9. The use of focus groups in evaluating quality of life components among elderly Chinese people.

    Science.gov (United States)

    Leung, Kai-Kuen; Wu, En-Chang; Lue, Bee-Horng; Tang, Li-Yu

    2004-02-01

    In Taiwan, to measure the quality of life (QOL) of elderly Chinese, one must rely on instruments developed in other Chinese or Western populations and not specifically for the elderly. The purpose of this study is to understand the components of QOL for elderly Chinese from Taiwan living in residential homes or in their communities. Forty-four elderly men and women divided into six focus groups were interviewed on video tape and the resultant recording was analyzed qualitatively by six independent researchers. The study yielded 15 QOL domains grouped into six dimensions: physical health (physical well-being, impact of illness, medical care), psychological health (mood states, life attitude and retrospection, philosophy of living, self-efficacy), social function (connectedness, exercise and leisure activities, social activities and services), living environment (living environment and arrangements, institutional factors), economic status, and religion and death (religion, death). For elderly Chinese in Taiwan, positive and negative life domains are equally important in the perception of life quality; person-environment interaction is a major consideration in the evaluation of QOL; family ties are an important component of QOL; traditional Chinese beliefs exert a positive influence on perceived QOL; and social functioning and vitality have a different meaning in Chinese compared to Western cultures.

  10. Evaluation of Service Life of Polystyrene in Tropical Marine Environment by Principal Component Analysis

    Directory of Open Access Journals (Sweden)

    Dongdong Song

    2015-01-01

    Full Text Available To predict the service life of polystyrene (PS under an aggressive environment, the nondimensional expression Z was established from a data set of multiple properties of PS by principal component analysis (PCA. In this study, PS specimens were exposed to the tropical environment on Xisha Islands in China for two years. Chromatic aberration, gloss, tensile strength, elongation at break, flexural strength, and impact strength were tested to evaluate the aging behavior of PS. Based on different needs of industries, each of the multiple properties could be used to evaluate the service life of PS. However, selecting a single performance variation will inevitably hide some information about the entire aging process. Therefore, finding a comprehensive measure representing the overall aging performance of PS can be highly significant. Herein, PCA was applied to obtain a specific property (Z which can represent all properties of PS. Z of PS degradation showed a slight decrease for the initial two months of exposure after which it increased rapidly in the next eight months. Subsequently, a slower increase of Z value was observed. From the three different stages shown as Z value increases, three stages have been identified for PS service life.

  11. A new creep-strain-replica method for evaluating the remaining life time of components

    International Nuclear Information System (INIS)

    Joas, H.D.

    2001-01-01

    To realise a safe and economic operation of older power- or chemical plants a strategy for maintenance is necessary, which makes it possible to operate a component or the plant longer than 300,000 operating hours, this also for the situation that the mode of operation has changed meanwhile. In Germany a realistic evaluation of the remaining life-time is done by comparing the actual calculated test data of a component with the code TRD 301 and TRD 508 and additional non-destructive tests or other codes like ASME, Sec. II, BS 5500, AFCEN (1985). According to many boundary conditions, the calculated data are inaccurate and the measuring of creep-strain at temperatures of about 600 o C with capacitive strain-gauges very expensive. Description of the approach of the problems: spotwelding of two gauges to the surface of a component (in a defined distance), forming a gap, producing of replica of the gap after certain operating hours at shut-down conditions by trained personal, evaluation of the replica to gain the amount of creep-strain using a scanning electron microscope, assessment of the creep-strain data. (Author)

  12. Evaluating the Impact of Conservatism in Industrial Fatigue Analysis of Life-Limited Components

    Directory of Open Access Journals (Sweden)

    Hoole Joshua

    2018-01-01

    Full Text Available This paper presents a review of the conservatism approaches applied by different industrial sectors to the stress-life (S-N analysis of ‘life-limited’ or ‘safe-life’ components. A comparison of the fatigue design standards for 6 industrial sectors identified that the conservatism approaches are highly inconsistent when comparing the areas of variability and uncertainty accounted for along with the conservatism magnitude and method of application. Through the use of a case-study based on the SAE keyhole benchmark and 4340 steel S-N data, the industrial sector which introduces the greatest reduction of a component life-limit was identified as the nuclear sector. The results of the case-study also highlighted that conservatism applied to account for scatter in S-N data currently provides the greatest contribution to the reduction of component life-limits.

  13. Small punch creep test: A promising methodology for high temperature plant components life evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Tettamanti, S. [CISE SpA, Milan (Italy); Crudeli, R. [ENEL SpA, Milan (Italy)

    1998-12-31

    CISE and ENEL are involved for years in a miniaturization creep methodology project to obtain similar non-destructive test with the same standard creep test reliability. The goal can be reached with `Small punch creep test` that collect all the requested characteristics; quasi nondestructive disk specimens extracted both on external or internal side of components, than accurately machined and tested on little and cheap apparatus. CISE has developed complete creep small punch procedure that involved peculiar test facility and correlation`s law comparable with the more diffused isostress methodology for residual life evaluation on ex-serviced high temperature plant components. The aim of this work is to obtain a simple and immediately applicable relationship useful for plant maintenance managing. More added work is need to validate the Small Punch methodology and for relationship calibration on most diffusion high temperature structural materials. First obtained results on a comparative work on ASTM A355 P12 ex-serviced pipe material are presented joint with a description of the Small Punch apparatus realized in CISE. (orig.) 6 refs.

  14. Small punch creep test: A promising methodology for high temperature plant components life evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Tettamanti, S [CISE SpA, Milan (Italy); Crudeli, R [ENEL SpA, Milan (Italy)

    1999-12-31

    CISE and ENEL are involved for years in a miniaturization creep methodology project to obtain similar non-destructive test with the same standard creep test reliability. The goal can be reached with `Small punch creep test` that collect all the requested characteristics; quasi nondestructive disk specimens extracted both on external or internal side of components, than accurately machined and tested on little and cheap apparatus. CISE has developed complete creep small punch procedure that involved peculiar test facility and correlation`s law comparable with the more diffused isostress methodology for residual life evaluation on ex-serviced high temperature plant components. The aim of this work is to obtain a simple and immediately applicable relationship useful for plant maintenance managing. More added work is need to validate the Small Punch methodology and for relationship calibration on most diffusion high temperature structural materials. First obtained results on a comparative work on ASTM A355 P12 ex-serviced pipe material are presented joint with a description of the Small Punch apparatus realized in CISE. (orig.) 6 refs.

  15. Potential emissions savings of lightweight composite aircraft components evaluated through life cycle assessment

    Directory of Open Access Journals (Sweden)

    2011-03-01

    Full Text Available A cradle-to-grave life cycle assessment (LCA of structural aircraft materials has been utilised to assess and compare the total emissions produced during manufacturing, use and disposal of aerospace materials and their selected components. First, a comparison of aluminium, GLARE and carbon fibre reinforced polymer (CFRP plates was performed to investigate the potential of lightweight composites in reducing aviation emissions. Subsequently, a case study is presented on a tubular component for which more accurate manufacturing data were directly available. A structural steel tube was replaced with a composite tubular component. The analysis has shown that once the composite material is used as a component in the aircraft, there is a cumulative saving of aircraft fuel and emissions, in particular from CFRP structures. The environmental analysis included the long-term use predictions for CFRPs, involving detailed raw materials production, use and operation, and disposal scenarios.

  16. Development of a web-based fatigue life evaluation system for primary components in a nuclear power plant

    International Nuclear Information System (INIS)

    Seo, Hyong Won; Lee, Sang Min; Choi, Jae Boong; Kim, Young Jin; Choi, Sung Nam; Jang, Ki Sang; Hong, Sung Yull

    2004-01-01

    A nuclear power plant is composed of a number of primary components. Maintaining the integrity of these components is one of the most critical issues in nuclear industry. In order to maintain the integrity of these primary components, a complicated procedure is required including regular in-service inspection, failure assessment, fracture mechanics analysis, etc. Also, experts in different fields have to co-operate to resolve the integrity issues on the basis of inspection results. This integrity evaluation process usually takes long, and thus, is detrimental for the plant productivity. Therefore, an effective safety evaluation system is essential to manage the integrity issues on a nuclear power plant. In this paper, a web-based fatigue life evaluation system for primary components in nuclear power plant is proposed. This system provides engineering knowledge-based information and concurrent and collaborative working environment through internet, and thus, is expected to raise the efficiency of integrity evaluation procedures on primary components of a nuclear power plant

  17. Software component quality evaluation

    Science.gov (United States)

    Clough, A. J.

    1991-01-01

    The paper describes a software inspection process that can be used to evaluate the quality of software components. Quality criteria, process application, independent testing of the process and proposed associated tool support are covered. Early results indicate that this technique is well suited for assessing software component quality in a standardized fashion. With automated machine assistance to facilitate both the evaluation and selection of software components, such a technique should promote effective reuse of software components.

  18. Corrosion allowances for sodium heated steam generators: evaluation of effects and extrapolation to component life time

    Energy Technology Data Exchange (ETDEWEB)

    Grosser, E E; Menken, G

    1975-07-01

    Steam generator tubes are subjected to two categories of corrosion; metal/sodium reactions and metal/water-steam interactions. Referring to these environmental conditions the relevant parameters are discussed. The influences of these parameters on the sodium corrosion and water/steam-reactions are evaluated. Extrapolations of corrosion values to steam generator design conditions are performed and discussed in detail. (author)

  19. Corrosion allowances for sodium heated steam generators: evaluation of effects and extrapolation to component life time

    International Nuclear Information System (INIS)

    Grosser, E.E.; Menken, G.

    1975-01-01

    Steam generator tubes are subjected to two categories of corrosion; metal/sodium reactions and metal/water-steam interactions. Referring to these environmental conditions the relevant parameters are discussed. The influences of these parameters on the sodium corrosion and water/steam-reactions are evaluated. Extrapolations of corrosion values to steam generator design conditions are performed and discussed in detail. (author)

  20. Initial Ada components evaluation

    Science.gov (United States)

    Moebes, Travis

    1989-01-01

    The SAIC has the responsibility for independent test and validation of the SSE. They have been using a mathematical functions library package implemented in Ada to test the SSE IV and V process. The library package consists of elementary mathematical functions and is both machine and accuracy independent. The SSE Ada components evaluation includes code complexity metrics based on Halstead's software science metrics and McCabe's measure of cyclomatic complexity. Halstead's metrics are based on the number of operators and operands on a logical unit of code and are compiled from the number of distinct operators, distinct operands, and total number of occurrences of operators and operands. These metrics give an indication of the physical size of a program in terms of operators and operands and are used diagnostically to point to potential problems. McCabe's Cyclomatic Complexity Metrics (CCM) are compiled from flow charts transformed to equivalent directed graphs. The CCM is a measure of the total number of linearly independent paths through the code's control structure. These metrics were computed for the Ada mathematical functions library using Software Automated Verification and Validation (SAVVAS), the SSE IV and V tool. A table with selected results was shown, indicating that most of these routines are of good quality. Thresholds for the Halstead measures indicate poor quality if the length metric exceeds 260 or difficulty is greater than 190. The McCabe CCM indicated a high quality of software products.

  1. Emerging technology for component life assessment

    International Nuclear Information System (INIS)

    O'Donnell, W.J.; Porowski, J.S.

    1991-01-01

    In this paper operating plant component damage and failure experience is reviewed. Loading conditions such as thermal stratification and striping, turbulent flow and flow-induced vibrations are often found to limit useful life, even though such loadings were typically not considered when the components were designed. High cycle thermal and mechanical fatigue are identified as important damage mechanisms. A new method of correlating fatigue data and extrapolating to the very high cycle regime is described. The results of environmental degradation testing during the past fifteen years have shown that such effects are much more deleterious than previously assumed. Therefore environmental and aging effects must be taken into account in evaluating the reliability and dependability of components for extended periods of operation. Since most of the available data on environmental effects focuses on measured crack growth rates, methods of developing improved fatigue life evaluation methods which include environmental effects on crack growth rates are now being developed. Fatigue tests on polished specimens are characterized by nominal stress amplitudes over yield, where linear elastic fracture mechanics (da/dn vs Δk) methods, such as those used in the ASME Code, are not valid

  2. Microgreens: Production, shelf life, and bioactive components.

    Science.gov (United States)

    Mir, Shabir Ahmad; Shah, Manzoor Ahmad; Mir, Mohammad Maqbool

    2017-08-13

    Microgreens are emerging specialty food products which are gaining popularity and increased attention nowadays. They are young and tender cotyledonary leafy greens that are found in a pleasing palette of colors, textures, and flavors. Microgreens are a new class of edible vegetables harvested when first leaves have fully expanded and before true leaves have emerged. They are gaining popularity as a new culinary ingredient. They are used to enhance salads or as edible garnishes to embellish a wide variety of other dishes. Common microgreens are grown mainly from mustard, cabbage, radish, buckwheat, lettuce, spinach, etc. The consumption of microgreens has nowadays increased due to higher concentrations of bioactive components such as vitamins, minerals, and antioxidants than mature greens, which are important for human health. However, they typically have a short shelf life due to rapid product deterioration. This review aimed to evaluate the postharvest quality, potential bioactive compounds, and shelf life of microgreens for proper management of this specialty produce.

  3. Component flaw evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, K [Babcock and Wilcox Co., Lynchburg, VA (United States). Nuclear Power Div.

    1988-12-31

    This document deals with flaw evaluation during in-service inspection. These flaws can be divided into two groups: defects originating from the manufacturing fabrication stage or service-induced flaws. These are mainly caused by high cycle thermal fatigue and are influenced by the presence of stress corrosion cracking mechanisms such as nozzles or pump shaft. (TEC).

  4. Calculation of the surface water pollution index in the evaluation of environmental component of product life cycle

    Directory of Open Access Journals (Sweden)

    Олег Аскольдович Проскурнин

    2015-05-01

    Full Text Available The assessment feasibility of the combined effect of the product life cycle on the environment is grounded. As an example, the pollution of surface waters at the production stage is considered in the article. A mechanism of ranking indicators of surface water pollution according to their importance is proposed. An algorithm for checking the consistency of the statistical expert judgment in determining weight coefficient for the indicators of pollution, based on the use of the concordance coefficient, is given

  5. Reproducibility of the items on the Stroke Specific Quality of Life questionnaire that evaluate the participation component of the International Classification of Functioning, Disability and Health.

    Science.gov (United States)

    Silva, Soraia Micaela; Corrêa, Fernanda Ishida; Faria, Christina Danielli Coelho de Morais; Pereira, Gabriela Santos; Attié, Edna Alves Dos Anjos; Corrêa, João Carlos Ferrari

    2016-12-01

    To evaluate the reproducibility of the Stroke Specific Quality of Life (SS-QOL) items that address the participation component of the International Classification of Functioning, Disability and Health (ICF) and analyse the correlation between the subscore of these 26 items and the total SS-QOL score. Seventy-five stroke survivors participated in this study. Reproducibility was evaluated using the intraclass correlation coefficient (ICC2,1), standard error of measurement (SEM), minimum detectable change (MDC) and the Bland-Altman plot. The correlation between the subscore of the 26 items and the total SS-QOL score was analysed using Spearman's correlation coefficients (rho) and simple linear regression. An alpha risk ≤ 0.05 was considered for all analyses. The SS-QOL items that address the participation component of the ICF demonstrated excellent reliability (intra-rater ICC2,1 = 0.96; inter-rater ICC2,1 = 0.95). The SEM and MDC were adequate. The Bland-Altman plot demonstrated satisfactory agreement. A significant and strong correlation (rho = 0.83) was found between the 26 SS-QOL items that address participation and the total SS-QOL score. Moreover, the evaluation of participation was found to explain 73% of the evaluation of health-related quality of life. The 26 SS-QOL items that address the participation component of the ICF demonstrated adequate reproducibility. Thus, participation, which represents the social aspects of functionality, can be adequately evaluated with these items. Implications for Rehabilitation The 26 Stroke Specific Quality of Life items that address participation proved to be reproducible for the analysis of social participation following a stroke. The findings can lead to a better understanding of the social participation of individuals with chronic hemiparesis and assist in the establishment of adequate treatment for such individuals. The rehabilitation process can be directed towards more specific goals focused on the

  6. Actual service life prediction of building components

    DEFF Research Database (Denmark)

    Aagaard, Niels-Jørgen; Brandt, Erik; Hansen, Ernst Jan de Place

    2014-01-01

    In recent years, sustainability and life cycle cost in the construction industry have been given great attention in many countries due to the heavy climatic and environmental impact from this sector. In Denmark, a sustainability certification scheme for buildings has been developed including....... Finally, it is discussed how to adjust the model for practical purposes, and a scheme for actual service life for selected building components important for analysis of sustainability is linked. The schemes are now being implemented as basis for sustainability certification of new buildings in Denmark....

  7. Pricing end-of-life components

    Science.gov (United States)

    Vadde, Srikanth; Kamarthi, Sagar V.; Gupta, Surendra M.

    2005-11-01

    The main objective of a product recovery facility (PRF) is to disassemble end-of-life (EOL) products and sell the reclaimed components for reuse and recovered materials in second-hand markets. Variability in the inflow of EOL products and fluctuation in demand for reusable components contribute to the volatility in inventory levels. To stay profitable the PRFs ought to manage their inventory by regulating the price appropriately to minimize holding costs. This work presents two deterministic pricing models for a PRF bounded by environmental regulations. In the first model, the demand is price dependent and in the second, the demand is both price and time dependent. The models are valid for single component with no inventory replenishment sale during the selling horizon . Numerical examples are presented to illustrate the models.

  8. Simulation of Microdamage and Evaluation of Remaining Life of Steam Conduit Components from New-Generation Refractory Steel 10Kh9MF-Sh

    Science.gov (United States)

    Gladshtein, V. I.

    2018-03-01

    The effects of microdamage on the remaining life of high-temperature components of steam conduits from high-chromium steel 10Kh9MF-Sh and low-alloy steel 12Kh1M1F are compared. To simulate the microdamage, specimens with a circular notch and different relative diameters are fabricated. Specimens with a notch simulating the highest degree of microdamage and smooth specimens are tested for long-term strength. The coefficient of the remaining life of a conduit is computed for the range of relative damage presenting practical interest.

  9. RCM and component evaluation logic

    International Nuclear Information System (INIS)

    Davis, B.; Anderson, J.

    1991-01-01

    This paper reports on the prevention maintenance program at Palo Verde Nuclear Generating Station (PVNGS), initially developed based on recommendations found in vendor technical manuals and accepted industry standards. The method was used until there was sufficient operating history to justify changes. The Reliability Centered Maintenance (RCM) project was started to provide another approach to the implementation of preventive maintenance. RCM evaluations were performed on nine systems. RCM was then suspended since it was found during implementation that additional documentation was necessary. RCM was selected as a preventive maintenance development process because it provides a documented analytical approach to establishing a preventive maintenance program. It is also being developed throughout the industry as a standard approach to preventive maintenance. PVNGS became interested in performing RCM analyses primarily to ensure that system and component reliability is maintained at the highest level possible and that hidden or rare failures are addressed by appropriate and effective maintenance. A secondary reason was to save maintenance expenditures

  10. Component aging evaluation with expert systems

    International Nuclear Information System (INIS)

    Wiesemann, J.S.; Maguire, H.T. Jr.

    1988-01-01

    The age degradation of components involves a complex relationship between a variety of variables. These relationships are typically modeled using probabilistic and deterministic analyses. These methods depend upon a formal understanding of the underlying degradation mechanisms and a database of experience which allows statistical analyses to extract numerical trends. At present, not all age degradation mechanisms are adequately modeled and available data for age degradation is in most cases insufficient. In addition, these methods tend to focus upon answers to isolated questions (e.g., What is the component failure rate?) rather than the more pertinent questions concerning operations and maintenance (e.g., should the component be replaced at the next outage). Fortunately, knowledge in the form of personal experience does exist which allows plant personnel to make decisions concerning operations and maintenance. This knowledge can be modeled using expert systems. This paper discusses CAGES (Component Aging Expert System). It combines expert rules (heuristics), probabilistic models, and deterministic models to make evaluations of component aging; predict the implications for component life extension, operational readiness, maintenance effectiveness, and safety, and make recommendations for maintenance and operation

  11. EPRI research on component aging and nuclear plant life extension

    International Nuclear Information System (INIS)

    Sliter, G.E.; Carey, J.J.

    1985-01-01

    This paper first describes several research efforts sponsored by the Electric Power Research Institute (EPRI) that examine the aging degradation of organic materials and the nuclear plant equipment in which they appear. This research includes a compendium of material properties characterizing the effects of thermal and radiation aging, shake table testing to evaluate the effects of aging on the seismic performance of electrical components, and a review of condition monitoring techniques applicable to electrical equipment. Also described is a long-term investigation of natural versus artificial aging using reactor buildings as test beds. The paper then describes how the equipment aging research fits into a broad-scoped EPRI program on nuclear plant life extension. The objective of this program is to provide required information, technology, and guidelines to enable utilities to significantly extend operating life beyond the current 40-year licensed term

  12. Self-Evaluation Scores of Hearing Difficulties and Quality of Life Components among Retired Workers with Noise-Related Hearing Loss

    Science.gov (United States)

    MIYAKITA, T.; UEDA, A.; ZUSHO, H.; KUDOH, Y.

    2002-02-01

    This study is intended to clarify the relationships between hearing loss caused both by noise exposure and aging and self-rated scores of hearing disabilities and to elucidate the structure of the quality of life (QOL) determinants and their moderating conditions among retired workers with noise-related hearing loss. The questionnaire consisted of three parts: background questions, the hearing disabilities and handicap scale (HDHS), and questions regarding QOL covering five areas, self-rated health, personal health practice, social support network, life satisfaction, and life events. Two hundred ten retired workers aged 56-65 years old (60·6±1·6) with noise-related hearing loss responded to our questionnaire. All were previously engaged in noise exposed work such as shipbuilding, steel and woodwork. According to the hearing disability score (DIS score), subjects were divided into three groups and comparisons were made of the hearing handicap score (HD score) among those groups. Although groups with a higher DIS score showed a higher HD score, a large individual difference in HD score was observed in each of the three groups with the same DIS score level. The results of multiple regression analysis including two variables (life satisfaction and HD score) as the dependent variables and seven variables as the independent variables showed that the strongest explanatory variable for life satisfaction was social support network, followed by handicaps caused by hearing disabilities, self-rated health and personal health practice. It was demonstrated that hearing disabilities and handicap measured by the Japanese version of the HDHS were directly associated with the deterioration in QOL. Measures of the social support network, life satisfaction, and hearing disabilities and handicaps may assist in the detection of workers who can be targeted for a variety of interventions, such as audiological rehabilitation or the creation of a barrier-free community that is supportive

  13. Determination of the remaining operational life of power plant components

    International Nuclear Information System (INIS)

    Eiden, H.; Vorwerk, K.; Graeff, D.; Hoff, E.

    1983-01-01

    The proceedings volume presents, in full wording, eight papers read at a TUEV Rheinland meeting in Johannesburg, South Africa, in August 1982. Subjects: Layout, quality assurance, service life analysis etc. of power plant components. (RW) [de

  14. Probabilistic approaches to life prediction of nuclear plant structural components

    International Nuclear Information System (INIS)

    Villain, B.; Pitner, P.; Procaccia, H.

    1996-01-01

    In the last decade there has been an increasing interest at EDF in developing and applying probabilistic methods for a variety of purposes. In the field of structural integrity and reliability they are used to evaluate the effect of deterioration due to aging mechanisms, mainly on major passive structural components such as steam generators, pressure vessels and piping in nuclear plants. Because there can be numerous uncertainties involved in a assessment of the performance of these structural components, probabilistic methods. The benefits of a probabilistic approach are the clear treatment of uncertainly and the possibility to perform sensitivity studies from which it is possible to identify and quantify the effect of key factors and mitigative actions. They thus provide information to support effective decisions to optimize In-Service Inspection planning and maintenance strategies and for realistic lifetime prediction or reassessment. The purpose of the paper is to discuss and illustrate the methods available at EDF for probabilistic component life prediction. This includes a presentation of software tools in classical, Bayesian and structural reliability, and an application on two case studies (steam generator tube bundle, reactor pressure vessel). (authors)

  15. Probabilistic approaches to life prediction of nuclear plant structural components

    International Nuclear Information System (INIS)

    Villain, B.; Pitner, P.; Procaccia, H.

    1996-01-01

    In the last decade there has been an increasing interest at EDF in developing and applying probabilistic methods for a variety of purposes. In the field of structural integrity and reliability they are used to evaluate the effect of deterioration due to aging mechanisms, mainly on major passive structural components such as steam generators, pressure vessels and piping in nuclear plants. Because there can be numerous uncertainties involved in an assessment of the performance of these structural components, probabilistic methods provide an attractive alternative or supplement to more conventional deterministic methods. The benefits of a probabilistic approach are the clear treatment of uncertainty and the possibility to perform sensitivity studies from which it is possible to identify and quantify the effect of key factors and mitigative actions. They thus provide information to support effective decisions to optimize In-Service Inspection planning and maintenance strategies and for realistic lifetime prediction or reassessment. The purpose of the paper is to discuss and illustrate the methods available at EDF for probabilistic component life prediction. This includes a presentation of software tools in classical, Bayesian and structural reliability, and an application on two case studies (steam generator tube bundle, reactor pressure vessel)

  16. Residual strength evaluation of concrete structural components ...

    Indian Academy of Sciences (India)

    fundamental material parameters that can be determined for use in design or evaluation. ... of plain and reinforced concrete beams using fracture mechanics principles. Design equations ... components accounting for tension softening effect.

  17. Fatigue evaluation in reactor vessel components

    International Nuclear Information System (INIS)

    Mattar Neto, Miguel; Miranda, Carlos A. de J.

    1994-01-01

    This paper presents a sequence of increasing complexity forms of evaluating fatigue damage of nuclear pressure vessel components caused by cycling loadings. Examples are included in order to illustrate such procedures. (author)

  18. NHI Component Technical Readiness Evaluation System

    International Nuclear Information System (INIS)

    Sherman, S.; Wilson, Dane F.; Pawel, Steven J.

    2007-01-01

    A decision process for evaluating the technical readiness or maturity of components (i.e., heat exchangers, chemical reactors, valves, etc.) for use by the U.S. DOE Nuclear Hydrogen Initiative is described. This system is used by the DOE NHI to assess individual components in relation to their readiness for pilot-scale and larger-scale deployment and to drive the research and development work needed to attain technical maturity. A description of the evaluation system is provided, and examples are given to illustrate how it is used to assist in component R and D decisions.

  19. Aging evaluation of active components by using performance evaluation

    International Nuclear Information System (INIS)

    Jung, S. K.; Jin, T. E.; Kim, J. S.; Jung, I. S.; Kim, T. R.

    2003-01-01

    Risk analysis and performance evaluation methodology were applied to the aging evaluation of active components in the periodic safety review of Wolsung unit 1. We conclude that evaluation of performance is more effective to discriminate the aging degradation of active component than the evaluation of aging mechanism. It is essential to analyze the common cause failures of low performance components to evaluate the properness of present maintenance system. Past 10 years failure history is used for establishing the performance criteria. Past 2 years failure history is used for the evaluating the recent performance condition. We analyze the failure mode of the components to improve the maintenance system. Performance evaluation methodology is useful for the quantitative evaluation of aging degradation of active components. Analysis on the repeated failures can be useful for the feedback to maintenance plan and interval

  20. Sandia_HighTemperatureComponentEvaluation_2015

    Energy Technology Data Exchange (ETDEWEB)

    Cashion, Avery T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-03-01

    The objective of this project is to perform independent evaluation of high temperature components to determine their suitability for use in high temperature geothermal tools. Development of high temperature components has been increasing rapidly due to demand from the high temperature oil and gas exploration and aerospace industries. Many of these new components are at the late prototype or first production stage of development and could benefit from third party evaluation of functionality and lifetime at elevated temperatures. In addition to independent testing of new components, this project recognizes that there is a paucity of commercial-off-the-shelf COTS components rated for geothermal temperatures. As such, high-temperature circuit designers often must dedicate considerable time and resources to determine if a component exists that they may be able to knead performance out of to meet their requirements. This project aids tool developers by characterization of select COTS component performances beyond published temperature specifications. The process for selecting components includes public announcements of project intent (e.g., FedBizOps), direct discussions with candidate manufacturers,and coordination with other DOE funded programs.

  1. Solid Propulsion Systems, Subsystems, and Components Service Life Extension

    Science.gov (United States)

    Hundley, Nedra H.; Jones, Connor

    2011-01-01

    The service life extension of solid propulsion systems, subsystems, and components will be discussed based on the service life extension of the Space Transportation System Reusable Solid Rocket Motor (RSRM) and Booster Separation Motors (BSM). The RSRM is certified for an age life of five years. In the aftermath of the Columbia accident there were a number of motors that were approaching the end of their five year service life certification. The RSRM Project initiated an assessment to determine if the service life of these motors could be extended. With the advent of the Constellation Program, a flight test was proposed that would utilize one of the RSRMs which had been returned from the launch site due to the expiration of its five year service life certification and twelve surplus Chemical Systems Division BSMs which had exceeded their eight year service life. The RSRM age life tracking philosophy which establishes when the clock starts for age life tracking will be described. The role of the following activities in service life extension will be discussed: subscale testing, accelerated aging, dissecting full scale aged hardware, static testing full scale aged motors, data mining industry data, and using the fleet leader approach. The service life certification and extension of the BSMs will also be presented.

  2. Residual life estimation of cracked aircraft structural components

    OpenAIRE

    Maksimović, Mirko S.; Vasović, Ivana V.; Maksimović, Katarina S.; Trišović, Nataša; Maksimović, Stevan M.

    2018-01-01

    The subject of this investigation is focused on developing computation procedure for strength analysis of damaged aircraft structural components with respect to fatigue and fracture mechanics. For that purpose, here will be defined computation procedures for residual life estimation of aircraft structural components such as wing skin and attachment lugs under cyclic loads of constant amplitude and load spectrum. A special aspect of this investigation is based on using of the Strain Energy Den...

  3. Life-time management for mechanical components; Lebensdauermanagement mechanischer Komponenten

    Energy Technology Data Exchange (ETDEWEB)

    Roos, E. [Stuttgart Univ. (DE). Materialpruefungsanstalt (MPA)

    2006-07-01

    The safety and economic efficiency of industrial systems depend on the quality of components and systems. In the field of power generation, power plants should be safe and have high availability and minimum specific generation cost. Life management is essential for this. Depending on the safety relevance of systems, structures and components (SSC), this includes proofs of integrity, time-oriented or condition-oriented preventive maintenance, or just failure-oriented maintenance. (orig.)

  4. Columbia River Component Data Evaluation Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    C.S. Cearlock

    2006-08-02

    The purpose of the Columbia River Component Data Compilation and Evaluation task was to compile, review, and evaluate existing information for constituents that may have been released to the Columbia River due to Hanford Site operations. Through this effort an extensive compilation of information pertaining to Hanford Site-related contaminants released to the Columbia River has been completed for almost 965 km of the river.

  5. Component evaluation testing and analysis algorithms.

    Energy Technology Data Exchange (ETDEWEB)

    Hart, Darren M.; Merchant, Bion John

    2011-10-01

    The Ground-Based Monitoring R&E Component Evaluation project performs testing on the hardware components that make up Seismic and Infrasound monitoring systems. The majority of the testing is focused on the Digital Waveform Recorder (DWR), Seismic Sensor, and Infrasound Sensor. In order to guarantee consistency, traceability, and visibility into the results of the testing process, it is necessary to document the test and analysis procedures that are in place. Other reports document the testing procedures that are in place (Kromer, 2007). This document serves to provide a comprehensive overview of the analysis and the algorithms that are applied to the Component Evaluation testing. A brief summary of each test is included to provide the context for the analysis that is to be performed.

  6. Residual strength evaluation of concrete structural components ...

    Indian Academy of Sciences (India)

    This paper presents methodologies for residual strength evaluation of concrete structural components using linear elastic and nonlinear fracture mechanics principles. The effect of cohesive forces due to aggregate bridging has been represented mathematically by employing tension softening models. Various tension ...

  7. Flight service evaluation of composite helicopter components

    Science.gov (United States)

    Mardoian, George H.; Ezzo, Maureen B.

    1994-01-01

    This paper presents the results of a NASA funded contract and Sikorsky research and development programs to evaluate structural composite components in flight service on Sikorsky Model S-76 helicopters. Selected components were removed and tested at prescribed intervals over a nine year time frame. Four horizontal stabilizers and thirteen tail rotor spars were returned from commercial service in West Palm Beach, Florida and in the Gulf Coast region of Louisiana to determine the long term effects of operations in hot and humid climates on component performance. Concurrent with the flight component evaluation, panels of materials used in their fabrication were exposed to the environment in ground racks. Selected panels were tested annually to determine the effects of exposure on physical and mechanical properties. The results of 55,741 component flight hours and 911 months of field exposure are reported and compared with initial Federal Aviation Administration (FAA) certification data. The findings of this program have provided increased confidence in the long term durability of advanced composite materials used in helicopter structural applications.

  8. REUSE OF AUTOMOTIVE COMPONENTS FROM DISMANTLED END OF LIFE VEHICLES

    Directory of Open Access Journals (Sweden)

    Piotr NOWAKOWSKI

    2013-12-01

    Full Text Available The problem of recycling end of life automotive vehicles is serious worldwide. It is one of the most important streams of waste in developed countries. It has big importance as recycling potential of raw materials content in automotive vehicles is valuable. Different parts and assemblies after dismantling can also be reused in vehicles where replacement of specific component is necessary. Reuse of the components should be taken into consideration in selecting the vehicles dismantling strategy. It also complies with European Union policy concerning end of life vehicles (ELV. In the paper it is presented systematic approach to dismantling strategies including disassembly oriented on further reuse of components. It is focused on decision making and possible benefits calculation from economic and environmental point of view.

  9. Aging techniques and qualified life for safety system components

    International Nuclear Information System (INIS)

    Weaver, W.W.

    1980-01-01

    Presently, the qualified life objective for Class IE safety system components in nuclear power plants is somewhat of a subjective engineering judgment. When the desired qualified life is ascertained, there are other choices that must be made (which may be influenced by the desired qualified life) such as selecting the aging procedure to use in the qualification process. Adding complexity to the situation is the fact that there are some limitations in aging techniques at the present time. This article presents (1) a discussion of the limitations in aging procedures, (2) the general philosophy of qualification, and (3) a proposed method for specifying a desired qualified life, which uses a probabilistic approach. The probabilistic approach proposed in item 3 can be applied to natural aging programs and eventually to accelerated aging once the present technical difficulties are overcome

  10. Integrated Evaluation of Closed Loop Air Revitalization System Components

    Science.gov (United States)

    Murdock, K.

    2010-01-01

    NASA s vision and mission statements include an emphasis on human exploration of space, which requires environmental control and life support technologies. This Contractor Report (CR) describes the development and evaluation of an Air Revitalization System, modeling and simulation of the components, and integrated hardware testing with the goal of better understanding the inherent capabilities and limitations of this closed loop system. Major components integrated and tested included a 4-Bed Modular Sieve, Mechanical Compressor Engineering Development Unit, Temperature Swing Adsorption Compressor, and a Sabatier Engineering and Development Unit. The requisite methodolgy and technical results are contained in this CR.

  11. Life extension of components with high cumulative fatigue usage

    International Nuclear Information System (INIS)

    Server, W.L.

    1985-01-01

    The current ASME Boiler and Pressure Vessel Code fatigue design approach has significant margins of safety as evidenced by fatigue data on full-scale vessels. In order to extend qualification (life) of components which have reached the Code design usage limit of unity, improved criteria are needed which address crack initiation and propagation separately such that safe operation of these components is ensured. The fatigue initiation phase is composed of two processes: initial microcracking of internal particles or accumulation of local strain (cyclic slip) creating discontinuities which form microcracks, and the growth of the microcracks in a noncontinuum manner. The microcracks which initiate will eventually grow to a size in which continuum mechanics apply, and fracture mechanics concepts have been employed. The later propagation to failure of a component is also composed of two parts, continuum crack growth in a stable manner and eventual unstable fracture of the remaining ligament of material. This paper reviews the current status of technology in assessing initiation and propagation relative to the current design Code and suggests areas of improvement to cover extended life of high usage factor components. To illustrate some of these considerations, a case study for a small manufacturing defect was reviewed. A realistic component was analyzed to investigate the interrelationship between the ASME Code Section III design life and crack propagation behavior of a small manufacturing defect. A pressurized water reactor (PWR) primary coolant system was used in the analysis, and the terminal end of the hot-leg pipe at the safe end weld was selected since usage factors as high as 0.95 had been reported. The particular plant chosen was Zion-1 because the necessary information on loading, including thermal transients, was available in the open literature. 11 refs., 1 fig., 1 tab

  12. Thermomechanical fatigue life prediction of high temperature components

    Energy Technology Data Exchange (ETDEWEB)

    Seifert, Thomas; Hartrott, Philipp von; Riedel, Hermann; Siegele, Dieter [Fraunhofer-Inst. fuer Werkstoffmechanik (IWM), Freiburg (Germany)

    2009-07-01

    The aim of the work described in this paper is to provide a computational method for fatigue life prediction of high temperature components, in which the time and temperature dependent fatigue crack growth is a relevant damage mechanism. The fatigue life prediction is based on a law for microcrack growth and a fracture mechanics estimate of the cyclic crack tip opening displacement. In addition, a powerful model for nonisothermal cyclic plasticity is employed, and an efficient laboratory test procedure is proposed for the determination of the model parameters. The models are efficiently implemented into finite element programs and are used to predict the fatigue life of a cast iron exhaust manifold and a notch in the perimeter of a turbine rotor made of a ferritic/martensitic 10%-chromium steel. (orig.)

  13. Service Life Of Main Piping Component Due To Low Thermal Stresses.Fatigue

    International Nuclear Information System (INIS)

    Miroshnik, R.; Jeager, A.; Ben Haim, H.

    1998-01-01

    The paper deals with estimating the service life of the power station Main piping component and describing the repair process for extending of its service life. After a long period of service, several circular fatigue cracks have been discovered at the bottom of the Main piping component chamber. Finite element analyses of transient thermal stresses, caused by power station startup, are carried out in the paper. The calculation results show good agreement between the theoretical locations of the maximum stresses and the actual locations of the cracks. There is a good agreement between theoretical evaluation and actual service life, as well. The possibility of machining out the cracks in order to prevent their growing is examined here. The machining enables us to extend the power station component's life service

  14. Lifetime evaluation of Bohunice NPP components

    International Nuclear Information System (INIS)

    Kupca, L.

    2001-01-01

    The paper discuss some aspects of the main primary components lifetime evaluation program in Bohunice NPP which is performed by Nuclear Power Plant Research Institute (NPPRI) Trnava in cooperation with Bohunice and other organizations involved. Facts presented here are based on the NPPRI research report which is regularly issued after each reactor fuel campaign under conditions of project resulted from the contract between NPPRI and Bohunice NPP. For the calculations, there has been used some computer codes adapted (or made) by NPPRI and the results are just the conclusive and very brief, presented here in Tables (Figures). (authors)

  15. Improved methods of creep-fatigue life assessment of components

    Energy Technology Data Exchange (ETDEWEB)

    Scholz, Alfred; Berger, Christina [Inst. fuer Werkstoffkunde (IfW), Technische Univ. Darmstadt (Germany)

    2009-07-01

    The improvement of life assessment methods contributes to a reduction of efforts at design and an effective long term operation of high temperature components, reduces technical risk and increases high economical advantages. Creep-fatigue at multi-stage loading, covering cold start, warm start and hot start cycles in typical loading sequences e.g. for medium loaded power plants, was investigated here. At hold times creep and stress relaxation, respectively, lead to an acceleration of crack initiation. Creep fatigue life time can be calculated by a modified damage accumulation rule, which considers the fatigue fraction rule for fatigue damage and the life fraction rule for creep damage. Mean stress effects, internal stress and interaction effects of creep and fatigue are considered. Along with the generation of advanced creep data, fatigue data and creep fatigue data as well scatter band analyses are necessary in order to generate design curves and lower bound properties inclusive. Besides, in order to improve lifing methods the enhancement of modelling activities for deformation and life time are important. For verification purposes, complex experiments at variable creep conditions as well as at creep fatigue interaction under multi-stage loading are of interest. Generally, the development of methods to transfer uniaxial material properties to multiaxial loading situations is a current challenge. For specific design purposes, a constitutive material model is introduced which is implemented as an user subroutine for Finite Element applications due to start-up and shut-down phases of components. Identification of material parameters have been performed by Neural Networks. (orig.)

  16. Simulation work of fatigue life prediction of rubber automotive components

    International Nuclear Information System (INIS)

    Samad, M S A; Ali, Aidy

    2010-01-01

    The usage of rubbers has always been so important, especially in automotive industries. Rubbers have a hyper elastic behaviour which is the ability to withstand very large strain without failure. The normal applications for rubbers are used for shock absorption, sound isolation and mounting. In this study, the predictions of fatigue life of an engine mount of rubber automotive components were presented. The finite element analysis was performed to predict the critical part and the strain output were incorporated into fatigue model for prediction. The predicted result shows agreement in term of failure location of rubber mount.

  17. Evaluation of local corrosion life by statistical method

    International Nuclear Information System (INIS)

    Kato, Shunji; Kurosawa, Tatsuo; Takaku, Hiroshi; Kusanagi, Hideo; Hirano, Hideo; Kimura, Hideo; Hide, Koichiro; Kawasaki, Masayuki

    1987-01-01

    In this paper, for the purpose of achievement of life extension of light water reactor, we examined the evaluation of local corrosion by satistical method and its application of nuclear power plant components. There are many evaluation examples of maximum cracking depth of local corrosion by dowbly exponential distribution. This evaluation method has been established. But, it has not been established that we evaluate service lifes of construction materials by satistical method. In order to establish of service life evaluation by satistical method, we must strive to collect local corrosion dates and its analytical researchs. (author)

  18. Construct validity of the items on the Stroke Specific Quality of Life (SS-QOL) questionnaire that evaluate the participation component of the International Classification of Functioning, Disability and Health.

    Science.gov (United States)

    Silva, Soraia Micaela; Corrêa, Fernanda Ishida; Pereira, Gabriela Santos; Faria, Christina Danielli Coelho de Morais; Corrêa, João Carlos Ferrari

    2018-01-01

    Analyze the construct validity and internal consistency of the Stroke Specific Quality of Life (SS-QOL) items that address the participation component of the ICF as well as analyze the ceiling and floor effects. One hundred subjects were analyzed: 85 community-dwelling and 15 institutionalized individuals. The analysis of construct validity was performed using classic psychometrics: (1) the comparison of known groups (individuals without restriction to participation vs. those with restriction to participation) using the Mann-Whitney test and (2) convergent validity - correlation between the scores on the SS-QOL items that address participation and the subscale scores of measures used to evaluate the similar constructs and concepts [the Short-Form Health Survey (SF-36), Functional Independence Measure (FIM) and grip strength test]. Spearman's correlation coefficients were calculated for this analysis. Cronbach's α was used for the analysis of internal consistency and both the ceiling and floor effects were analyzed. The level of significance for all analyses was α = 0.05. The a priori hypotheses regarding construct validity were partially demonstrated, as only five of the eight domains exhibited positive moderate to strong correlations (r > 0.40) with measures that address constructs similar to those addressed on the SS-QOL questionnaire. The items demonstrated adequate internal consistency and are capable of differentiating individuals with and without restriction to participation. The ceiling and floor effects were considered adequate for the total SS-QOL score, but beyond acceptable standards for some domains. The 26 items of the SS-QOL questionnaire measure a multidimensional construct and therefore do not only address participation. However, the items demonstrated adequate internal consistency and are capable of differentiating individuals with and without restriction to participation. Implications for rehabilitation The 26 items of the SS

  19. Service life monitoring of the main components at the Temelin nuclear power plant

    International Nuclear Information System (INIS)

    Hahn, J.; Vincour, D.

    2007-01-01

    Knowledge and experience gained from the introduction and periodical implementation of life assessment of the major components of the Temelin nuclear power plant is summarized. The initial Soviet technical design of the plant did not incorporate lifetime monitoring and evaluation, therefore it was completed with demonstrative strength and lifetime calculations from Czech companies. Moreover, a Westinghouse primary circuit diagnosis and monitoring system, including the monitoring of temperature and pressure cycles for low-cycle fatigue evaluation, was installed at the plant. The DIALIFE code for the calculation of mainly the low-cycle fatigue of the key pressure components, was developed and installed subsequently as a superstructure to the monitoring system. (author)

  20. Ageing and life prediction of cast duplex stainless steel components

    International Nuclear Information System (INIS)

    Chung, H.M.

    1992-01-01

    Cast duplex stainless steels, used extensively in nuclear, chemical and petroleum industries because of higher strength, better weldability, higher resistance to stress corrosion cracking, and soundness of casting, are susceptible to thermal aging embrittlement during service at temperatures as low as ∼250 o C. Recent advances in understanding the aging mechanisms, kinetics, and mechanical properties are presented, with emphasis on application of the material in safety-significant components in a nuclear reactor. Aging embrittlement is primarily due to spinodal decomposition of ferrite involving segregation of Fe, Cr, and Ni, and precipitation of M 23 C 6 on ferrite-austenite boundaries or in ferrite. Aging kinetics are strongly influenced by synergistic effects of other metallurgical reactions that occur in parallel with the spinodal decomposition, i.e. clustering of Ni, Mo, and Si and G-phase precipitation in ferrite. A number of methods are outlined for estimating end-of-life aging, depending on several factors such as degree of permissible conservatism, availability of component archive material, and methods of estimating and verifying the activation energy of aging. (Author)

  1. Improved computation method in residual life estimation of structural components

    Directory of Open Access Journals (Sweden)

    Maksimović Stevan M.

    2013-01-01

    Full Text Available This work considers the numerical computation methods and procedures for the fatigue crack growth predicting of cracked notched structural components. Computation method is based on fatigue life prediction using the strain energy density approach. Based on the strain energy density (SED theory, a fatigue crack growth model is developed to predict the lifetime of fatigue crack growth for single or mixed mode cracks. The model is based on an equation expressed in terms of low cycle fatigue parameters. Attention is focused on crack growth analysis of structural components under variable amplitude loads. Crack growth is largely influenced by the effect of the plastic zone at the front of the crack. To obtain efficient computation model plasticity-induced crack closure phenomenon is considered during fatigue crack growth. The use of the strain energy density method is efficient for fatigue crack growth prediction under cyclic loading in damaged structural components. Strain energy density method is easy for engineering applications since it does not require any additional determination of fatigue parameters (those would need to be separately determined for fatigue crack propagation phase, and low cyclic fatigue parameters are used instead. Accurate determination of fatigue crack closure has been a complex task for years. The influence of this phenomenon can be considered by means of experimental and numerical methods. Both of these models are considered. Finite element analysis (FEA has been shown to be a powerful and useful tool1,6 to analyze crack growth and crack closure effects. Computation results are compared with available experimental results. [Projekat Ministarstva nauke Republike Srbije, br. OI 174001

  2. Integrated Design Software Predicts the Creep Life of Monolithic Ceramic Components

    Science.gov (United States)

    1996-01-01

    Significant improvements in propulsion and power generation for the next century will require revolutionary advances in high-temperature materials and structural design. Advanced ceramics are candidate materials for these elevated-temperature applications. As design protocols emerge for these material systems, designers must be aware of several innate features, including the degrading ability of ceramics to carry sustained load. Usually, time-dependent failure in ceramics occurs because of two different, delayedfailure mechanisms: slow crack growth and creep rupture. Slow crack growth initiates at a preexisting flaw and continues until a critical crack length is reached, causing catastrophic failure. Creep rupture, on the other hand, occurs because of bulk damage in the material: void nucleation and coalescence that eventually leads to macrocracks which then propagate to failure. Successful application of advanced ceramics depends on proper characterization of material behavior and the use of an appropriate design methodology. The life of a ceramic component can be predicted with the NASA Lewis Research Center's Ceramics Analysis and Reliability Evaluation of Structures (CARES) integrated design programs. CARES/CREEP determines the expected life of a component under creep conditions, and CARES/LIFE predicts the component life due to fast fracture and subcritical crack growth. The previously developed CARES/LIFE program has been used in numerous industrial and Government applications.

  3. LOGIC SIMULATION OF LIFE SUPPORT SYSTEM COMPONENT IN REAL TIME

    Directory of Open Access Journals (Sweden)

    A. S. Marchenko

    2016-01-01

    Full Text Available Abstract. The article proposed the use of simulation methods for evaluating the effectiveness of a stepped fan engine speed control while maintaining the air flow volume in the set boundaries of the «fan-filter» system. A detailed algorithm of the program made on the basis of an Any Logic software package. Is analyzed the possibility of using the proposed method in the design of ventilation systems.The proposed method allows at the design stage to determine the maximum replacement intervals of the systems filter elements, as well as to predict the time to switch the fan motor speeds. Using of the technique allows to refuse the complex air flow systems and maximize the life of the filter elements set.Methods of logical processes modeling allows to reduce construction costs and improve energy efficiency of buildings. 

  4. DETERMINATION OF THE STRUCTURAL COMPONENTS OF LIFE COMPETENCE IN STUDENTS OF CLASSICAL UNIVERSITIES

    Directory of Open Access Journals (Sweden)

    Liudmyla Zubkova

    2016-11-01

    Full Text Available Nowadays, life competence of a person plays a very important role as it helps to solve effectively problems that every person can face in his/her life. Nevertheless, contemporary students show an unsatisfactory level of life competence, so it is very important for teachers in high education to pay attention to its formation. It was found that structural components of life competence have been researched by such scientists as M. Stepanenko, N. Nischeta, L. Scherbakova and others. However, in our opinion structural components of life competence should be generalized, so it is the purpose of our article. It is in studies revealing that there is no unified point of view of life competence structural components. In particular, scientists have distinguished such life competence structural components as 1 meta anthropologic, individual and personal, contextual, and social components (M. Stepanenko; 2 self-conception, axiological values, emotional and characterful components (V. Nischeta, 3 social, educative, communicative, and auto psychological components (L. Scherbakova. It should be noticed that the meta anthropologic component concentrates on the ability of a person to reflect individually main attributes of a human life; the individual and personal component focuses on self-identification and self-realization; the contextual component considers the ability of an individual to take real-life situations in good sense; the social component focuses on personal ability to solve real-life tasks regarding to social circumstances. The educative component of life competence includes knowledge of educational process essence and specific features of higher educational establishments. The communicative component represents knowledge about the role of communication in life success strategy. Taking into account scientists’ opinion and the author’s consideration it is concluded that the elucidation and generalization of life competence structural components

  5. Control of selected VVER components life time SKODA JS a.s. experience

    International Nuclear Information System (INIS)

    Zdebor, J.; Pribulla, E.

    2005-01-01

    Experience from the operation of nuclear power plants with type VVER reactors has shown that the life time management of a number of nuclear reactor components is technically as well as with respect to safety substantiated even at the time which exceeds their originally designed life time. To accept such solution it was necessary to develop and implement a number of programs based on which it was possible to evaluate the actual condition of monitored equipment. It is a condition allowing to adopt solution concerning the possibility of their further operation. Experience from the manufacture of 21 sets of reactor equipment for VVER 440 and 3 sets VVER 1000 has been gathered in SKODA JS a.s. which have been completed by experience from service activities performed at operated nuclear power plants. Analyses of manufacturing data and in-service inspection results completed by a lot of laboratory tests have become the basis for the development of selected VVER components life time management programs. The paper focuses on the life time management of those VVER components which SKODA JS a.s. has most experience with. (authors)

  6. NPP component maintenance and life management in Russia

    International Nuclear Information System (INIS)

    Tutnov, I.; Lyssakov, V.

    2002-01-01

    This report represents the conceptual strategies (ideas) on life management programs for nuclear power plants. Use of the optimum programs for NPP's NDE, maintenance service, operation and service life can provide the best economic benefit for the utilities. The paper presents general approaches to life management, maintenance service, and risks of operating and service life of NPPs in Russia. The report offers some optimized ways for the solution of these important tasks

  7. Life Extension of Critical Components Betterments and Modifications

    International Nuclear Information System (INIS)

    Baero, G.; D'Annucci, F.; Russ, J.

    1992-01-01

    Ageing plants reveal that some of the components within the primary circuit do not show the expected life time. Betterments have been enabled by repairing or replacing defective parts. ABB. has developed specific repair processes to meet these requirements. The goal is to be as flexible as possible in order to adjust methods, procedures, and equipment to the specific needs of each plant within the shortest time possible. Inspection methods and repair procedures are discussed to present betterments and modifications for some components within the primary circuit by explaining the ABB. approach for e. g. the Inspection of pressure vessel closure head penetrations: The manipulator is designed, constructed, controlled and monitored just like a manipulator developed for steam generator inspections and repair. The E CT-probes are qualified to resolve cracks ensuring a high sensitivity if there is no thermal sleeve or if the probe is inserted into the gap. Looking through the thermal sleeve by an E CT-probe reduces the sensitivity slightly. The inspection and repair of internals, e. g. fuel alignment pins and baffle former bolts: the UST-methods, the manipulator equipment, the tools and the procedures are provided to find defective pins resp. Bolts, and to replace them. Approximately 1000 fuel alignment pins have been replaced. Three inspection systems have been provided to inspect baffle former bolts. They were upgraded for an exchange of baffle former bolts. The bolt resp. pin betterment is achieved by an improved material and a ventilation preventing stagnant water. Advances in maintenance of steam generators: Focus is given to identify potentially defective steam generator tube areas within tube support plates or ABB reviation bars. The good experience gained with the Micro lock of ABB. removable plugs is transferred to the sleeves which have a Micro lock joint at the bottom. Chemically cleaning the secondary side of a steam generator utilizing the SIG process at

  8. Concrete component aging and its significance relative to life extension of nuclear power plants

    International Nuclear Information System (INIS)

    Naus, D.J.

    1986-09-01

    The objectives of this study are to (1) expand upon the work that was initiated in the first two Electric Power Research Institute studies relative to longevity and life extension considerations of safety-related concrete components in light-water reactor (LWR) facilities and (2) provide background that will logically lead to subsequent development of a methodology for assessing and predicting the effects of aging on the performance of concrete-based materials and components. These objectives are consistent with Nuclear Plant Aging Research (NPAR) Program goals: (1) to identify and characterize aging and service wear effects that, if unchecked, could cause degradation of structures, components, and systems and, thereby, impair plant safety; (2) to identify methods of inspection, surveillance, and monitoring or of evaluating residual life of structures, components, and systems that will ensure timely detection of significant aging effects before loss of safety function; and (3) to evaluate the effectiveness of storage, maintenance, repair, and replacement practices in mitigating the rate and extent of degradation caused by aging and service wear

  9. Evaluation of aging degradation of structural components

    International Nuclear Information System (INIS)

    Chopra, O.K.; Shack, W.J.

    1992-03-01

    Irradiation embrittlement of the neutron shield tank (NST) A212 Grade B steel from the Shippingport reactor, as well as thermal embrittlement of CF-8 cast stainless steel components from the Shippingport and KRB reactors, has been characterized. Increases in Charpy transition temperature (CTT), yield stress, and hardness of the NST material in the low-temperature low-flux environment are consistent with the test reactor data for irradiations at 8 n/cm 2 ·s at the low operating temperature of the Shippingport NST, i.e., 55 degrees C. This suggest that radiation damage in Shippingport NST and HFIR surveillance samples may be different because of the neutron spectra and/or Cu and Ni content of the two materials. Cast stainless steel components show relatively modest decreases in fracture toughness and Charpy-impact properties and a small increase in tensile strength. Correlations for estimating mechanical properties of cast stainless steels predict accurate or slightly conservative values for Charpy-impact energy, tensile flow stress, fracture toughness J-R curve, and J IC of the materials. The kinetics of thermal embrittlement and degree of embrittlement at saturation, i.e., the minimum impact energy achieved after long-term aging, were established from materials that were aged further in the laboratory. The results were consistent with the estimates. The correlations successfully predict the mechanical properties of the Ringhals 2 reactor hot- and crossover-leg elbows (CF-8M steel) after service of ∼15 y

  10. The prediction of reliability and residual life of reactor pressure components

    International Nuclear Information System (INIS)

    Nemec, J.; Antalovsky, S.

    1978-01-01

    The paper deals with the problem of PWR pressure components reliability and residual life evaluation and prediction. A physical model of damage cumulation which serves as a theoretical basis for all considerations presents two major aspects. The first one describes the dependence of the degree of damage in the crack leading-edge in pressure components on the reactor system load-time history, i.e. on the number of transient loads. Both stages, fatigue crack initiation and growth through the wall until the critical length is reached, are investigated. The crack is supposed to initiate at the flaws in a strength weld joint or in the bimetallic weld of the base ferritic steel and the austenitic stainless overlay cladding. The growth rates of developed cracks are analysed in respect to different load-time histories. Important cyclic properties of some steels are derived from the low-cycle fatigue theory. The second aspect is the load-time history-dependent process of precipitation, deformation and radiation aging, characterized entirely by the critical crack-length value mentioned above. The fracture point, defined by the equation ''crack-length=critical value'' and hence the residual life, can be evaluated using this model and verified by in-service inspection. The physical model described is randomized by considering all the parameters of the model as random. Monte Carlo methods are applied and fatigue crack initiation and growth is simulated. This permits evaluation of the reliability and residual life of the component. The distributions of material and load-time history parameters are needed for such simulation. Both the deterministic and computer-simulated probabilistic predictions of reliability and residual life are verified by prior-to-failure sequential testing of data coming from in-service NDT periodical inspections. (author)

  11. Research on development model of nuclear component based on life cycle management

    International Nuclear Information System (INIS)

    Bao Shiyi; Zhou Yu; He Shuyan

    2005-01-01

    At present the development process of nuclear component, even nuclear component itself, is more and more supported by computer technology. This increasing utilization of the computer and software has led to the faster development of nuclear technology on one hand and also brought new problems on the other hand. Especially, the combination of hardware, software and humans has increased nuclear component system complexities to an unprecedented level. To solve this problem, Life Cycle Management technology is adopted in nuclear component system. Hence, an intensive discussion on the development process of a nuclear component is proposed. According to the characteristics of the nuclear component development, such as the complexities and strict safety requirements of the nuclear components, long-term design period, changeable design specifications and requirements, high capital investment, and satisfaction for engineering codes/standards, the development life-cycle model of nuclear component is presented. The development life-cycle model is classified at three levels, namely, component level development life-cycle, sub-component development life-cycle and component level verification/certification life-cycle. The purposes and outcomes of development processes are stated in detailed. A process framework for nuclear component based on system engineering and development environment of nuclear component is discussed for future research work. (authors)

  12. Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    International Nuclear Information System (INIS)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun

    2004-02-01

    The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds

  13. Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2004-02-15

    The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds.

  14. Life prediction methodology for ceramic components of advanced vehicular heat engines: Volume 1. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Khandelwal, P.K.; Provenzano, N.J.; Schneider, W.E. [Allison Engine Co., Indianapolis, IN (United States)

    1996-02-01

    One of the major challenges involved in the use of ceramic materials is ensuring adequate strength and durability. This activity has developed methodology which can be used during the design phase to predict the structural behavior of ceramic components. The effort involved the characterization of injection molded and hot isostatic pressed (HIPed) PY-6 silicon nitride, the development of nondestructive evaluation (NDE) technology, and the development of analytical life prediction methodology. Four failure modes are addressed: fast fracture, slow crack growth, creep, and oxidation. The techniques deal with failures initiating at the surface as well as internal to the component. The life prediction methodology for fast fracture and slow crack growth have been verified using a variety of confirmatory tests. The verification tests were conducted at room and elevated temperatures up to a maximum of 1371 {degrees}C. The tests involved (1) flat circular disks subjected to bending stresses and (2) high speed rotating spin disks. Reasonable correlation was achieved for a variety of test conditions and failure mechanisms. The predictions associated with surface failures proved to be optimistic, requiring re-evaluation of the components` initial fast fracture strengths. Correlation was achieved for the spin disks which failed in fast fracture from internal flaws. Time dependent elevated temperature slow crack growth spin disk failures were also successfully predicted.

  15. Methodology to identify, review, and evaluate components for license renewal

    International Nuclear Information System (INIS)

    Carlson, D.D.; Gregor, F.E.; Walker, R.S.

    1988-01-01

    A methodology has been developed to systematically identify, review, and evaluate plant equipment for license renewal. The method builds upon the existing licensing basis, operating history, and accepted deterministic and probabilistic techniques. Use of these approaches provides a focus for license renewal upon those safety-significant systems and components that are not routinely replaced, refurbished, or subject to detailed inspection as part of the plant's existing test, maintenance, and surveillance programs. Application of the method identified the PWR and BWR systems that should be subjected to detailed license renewal review. Detailed examination of two example systems demonstrates the approach. The review and evaluation of plant equipment for license renewal differ from the initial licensing of the plant. A substantial operating history has been established, the licensing basis has evolved from the original one, and plant equipment has been subject to periodic maintenance and surveillance throughout its life. In consideration of these differences, a basis for license renewal is needed. License renewal should be based upon continuation of the existing licensing basis and recognition of existing programs and operating history

  16. A method for evaluation the activity of the reactor components

    International Nuclear Information System (INIS)

    Gugiu, E.D.; Roth, Cs.

    2003-01-01

    The ability to predict the radioactivity levels of the reactor components is an important aspect from waste management point of view, as well as from radioprotection purposes. A special case is represented by the research reactors where, one of the major contributions to the radioactivity inventory is due to the experimental devices involved in various research works during reactor life. Generally, aluminum and aluminum alloys are used in manufacturing these devices; as a result, the work presented in this paper is focused on the qualitative and quantitative analysis of the radioactive isotopes contained in these materials. A device used for silicon doping by neutron transmutation that was placed near TRIGA reactor core is investigated. The isotopic content of various samplings drawn from various points of the device was analyzed by gamma spectrometry using a HPGe detector. Computations, using the MCNP5 code, are also performed in order to evaluate the reaction rates for all the isotopes and their reactions. The Monte Carlo simulations are performed for a detailed geometry and material composition of the reactor core and the device. The Origen-S code is also used in order to evaluate the isotopic inventory and the activity values. A detailed analysis regarding the possibility to estimate by computations and/or by gamma spectrometry the activity values of the isotopes which are of interest for decommissioning is presented in the paper. (authors)

  17. Actions concerning nuclear power plant life evaluation

    International Nuclear Information System (INIS)

    Chocron, M.; Fabbri, S.; Mizrahi, R.; Savino, E.J.; Versaci, R.A.

    1998-01-01

    One of the main activities to be undertaken by CNEA will be to provide technological assistance to NASA in problems concerning NPP operation. Works on life extensions of NPP are included in these activities. To fulfill these requirements the Atomic Energy National Commission (CNEA) has constituted a technical committee for Nuclear Power Plants Support (CAPCEN). CAPCEN should be the knowledge reservoir of those issues concerning the performance, safety and life extension of Nuclear Power Plants. One of CAPCEN's most important activities is to promote research work connected with such issues. The main technical areas are: Pressure Vessel and Piping, Heat Exchanges and Fuel Channels and Reactor Inner Components. Efforts are focused on the identification of the main components susceptible of ageing, the study of their ageing mechanisms, the follow-up of their behaviour during operation, and the measures taken to extend their life. (author)

  18. Aging and life extension of major light water reactor components

    International Nuclear Information System (INIS)

    Shah, V.N.; MacDonald, P.E.

    1993-01-01

    An understanding of the aging degradation of the major pressurized and boiling water reactor structures and components is given. The design and fabrication of each structure or component is briefly described followed by information on the associated stressors. Interactions between the design, materials and various stressors that cause aging degradation are reviewed. In many cases, aging degradation problems have occurred, and the plant experience to date is analyzed. The discussion summarize the available aging-related information and are supported with extensive references, including references to US Nuclear Regulatory Commission (USNRC) documents, Electric Power Research Institute reports, US and international conference proceedings and other publications

  19. Novel Repair Technique for Life-Extension of Hydraulic Turbine Components in Hydroelectric Power Stations

    Science.gov (United States)

    Hiramatsu, Yoichi; Ishii, Jun; Funato, Kazuhiro

    A significant number of hydraulic turbines operated in Japan were installed in the first half of the 20th century. Today, aging degradation and flaws are observed in these turbine equipments. So far, Japanese engineers have applied NDI technology of Ultrasonic Testing (UT) to detect the flaws, and after empirical evaluation of the remaining life they decided an adequate moment to replace the equipments. Since the replacement requires a large-scale field site works and high-cost, one of the solutions for life-extension of the equipments is introduction of repair services. We have been working in order to enhance the accuracy of results during the detection of flaws and flaws dimensioning, in particular focusing on the techniques of Tip-echo, TOFD and Phased-Array UT, accompanied by the conventional UT. These NDI methods made possible to recognize the entire image of surface and embedded flaws with complicated geometry. Then, we have developed an evaluation system of these flaws based on the theory of crack propagation, of the logic of crack growth driven by the stress-intensity factor of the crack tip front. The sophisticated evaluation system is constituted by a hand-made software and database of stress-intensity factor. Based on these elemental technologies, we propose a technique of repair welding to provide a life-extension of hydraulic turbine components.

  20. Remaining life assessment and plant life extension in high temperature components of power and petrochemical plant

    International Nuclear Information System (INIS)

    Fleming, A.

    2003-01-01

    This paper explains the reasons why plant life can so easily be extended beyond the original design life. It details the means by which plant life extension is normally achieved, a structured plan for achieving such plant life extension at reasonable cost and some of the key techniques used in assessing the remaining life and discusses the simple repair options available. (author)

  1. Reactor pressure vessel and reactor coolant circuit cast duplex stainless steel components contribution of the expertise for life management studies

    International Nuclear Information System (INIS)

    Bezdikian, Georges

    2006-09-01

    The life management of French Nuclear Power Plants is a major stake from an economic and a technical point of view considering the aging management assessment of the key components of the plant. The actual life evaluation is the result of prediction of life assessment from important program of expertise for the 3-loop PWR and 4-loop PWR plants in operation. To optimize the strategic policy in order to achieve the best possible performance and to prepare the technical and economical choice and decision, the paper presents the association of life management strategy and the program of expertise considering: - the identification of degradation for different components and prediction criteria proposed; - the large database from cast reactor coolant and component removed from nuclear power plants and expertise studies to confirm the prediction; - the life evaluation of RPV with radiation surveillance program based on the expertise of irradiation capsules, it is particularly shown how the expertise is in the center of the strategic choice. The French utility has organized the life management of nuclear plant as a function of several programs of expertise of knowledge on the long term experience feedback and the maintenance program for life. This paper shows updated on RPV and reactor coolant equipment activities engaged by utility on: - periodic maintenance and volume of expertise; - Alternative maintenance actions; - Large volume of expertise and how are managed these results to predict the aging management. (author)

  2. Reactor coolant pump service life evaluation for current life cycle optimization and license renewal

    International Nuclear Information System (INIS)

    Doroshuk, B.W.; Berto, D.S.; Robles, M.

    1990-01-01

    This paper reports that as part of the plant life cycle management and license renewal program, Baltimore Gas and Electric Company (BG and E) has completed a service life evaluation of their reactor coolant pumps, funded jointly by EPRI and performed by ABB Combustion Engineering Nuclear Power. Two of the goals of the BG and E plant life cycle management and license renewal program, and of this current evaluation, are to identify actions which would optimize current plant operation, and ensure that license renewal remains a viable option. The reactor coolant pumps (RCPs) at BG and E's Calvert Cliffs Units 1 and 2 are Byron Jackson pumps with a diffuser and a single suction. This pump design is also used in many other nuclear plants. The RCP service life evaluation assessed the effect of all plausible age-related degradation mechanisms (ARDMs) on the RCP components. Cyclic fatigue and thermal embrittlement were two ARDMs identified as having a high potential to limit the service life of the pump case. The pump case is a primary pressure boundary component. Hence, ensuring its continued structural integrity is important

  3. Fatigue life of the plasma-facing components in PULSAR

    International Nuclear Information System (INIS)

    Crowell, J.A.; Blanchard, J.P.

    1994-01-01

    The PULSAR project is a multi-institutional effort to determine the advantages that can be gained by building a tokamak without current drive. This machine would reduce the capital and operating costs of the machine by avoiding the need for complex current drive hardware but it must compensate for this with an energy storage scheme and with increased structural requirements due to cyclic fatigue. This paper presents the results of the fatigue analysis for the plasma-facing components of PULSAR. The structural analysis is carried out using two-dimensional finite element models and a variety of boundary conditions to account for the third dimension. In some cases the temperature distribution is modified to simulate behaviors which cannot normally be modeled with two-dimensional finite element models. PULSAR features two major engineering designs: a liquid metal-cooled vanadium design and a helium-cooled SiC/SiC design. Results are given for each. It is shown that the superior thermal and strength properties of the vanadium alloy simplify the component design process significantly. The SiC composite properties cause significantly more difficulty for the designer and, in particular, no credible design is found for a divertor fabricated solely from the SiC composite. This conclusion is based on current data for the thermophysical properties and fatigue strength of SiC fiber composites, so developments in these areas could allow the fabrication of a SiC/SiC divertor for a pulsed tokamak

  4. Tracking and Control of Gas Turbine Engine Component Damage/Life

    Science.gov (United States)

    Jaw, Link C.; Wu, Dong N.; Bryg, David J.

    2003-01-01

    This paper describes damage mechanisms and the methods of controlling damages to extend the on-wing life of critical gas turbine engine components. Particularly, two types of damage mechanisms are discussed: creep/rupture and thermo-mechanical fatigue. To control these damages and extend the life of engine hot-section components, we have investigated two methodologies to be implemented as additional control logic for the on-board electronic control unit. This new logic, the life-extending control (LEC), interacts with the engine control and monitoring unit and modifies the fuel flow to reduce component damages in a flight mission. The LEC methodologies were demonstrated in a real-time, hardware-in-the-loop simulation. The results show that LEC is not only a new paradigm for engine control design, but also a promising technology for extending the service life of engine components, hence reducing the life cycle cost of the engine.

  5. Condition Based Prognostics of Passive Components - A New Era for Nuclear Power Plant Life Management

    International Nuclear Information System (INIS)

    Bakhtiari, S.; Mohanty, S.; Prokofiev, I.; Tregoning, R.

    2012-01-01

    As part of a research project sponsored by the U.S. NRC, Argonne National Laboratory (ANL) conducted scoping studies to identify viable and promising sensors and techniques for in-situ inspection and real-time monitoring of degradation in nuclear power plant (NPP) systems, structures, and components (SSC). Significant advances have been made over the past two decades toward development of online monitoring (OLM) techniques for detection, diagnostics, and prognostics of degradation in active nuclear power plant (NPP) components (e.g., pumps, valves). However, early detection of damage and degradation in safety-critical passive components, (e.g. piping, tubing pressure vessel), is challenging, and will likely remain so for the foreseeable future. Ensuring the structural integrity of the reactor pressure vessel (RPV) and piping systems in particular is a prerequisite to long term safe operation of NPPs. The current practice is to implement inservice inspection (ISI) and preventive maintenance programs. While these programs have generally been successful, they are limited in that information is only obtained during plant outages. Additionally, these inspections, often the critical path in the outage schedule, are costly, time consuming, and involve potentially high dose to nondestructive examination/evaluation (NDE) personnel. A viable plant-wide on-line structural health monitoring program for continuous and automatic monitoring of critical SSCs could be a more effective approach for guarding against unexpected failures. Specifically, OLM information about the current condition of the SSCs could be input to an online prognostics (OLP) system to forecast their remaining useful life in real time. This paper provides an overview of scoping studies performed at ANL on assessing the viability of OLM and OLP systems for real time and automated monitoring and remaining of condition and the remaining useful life of passive components in NPPs. (author)

  6. Experimental Facilities for Performance Evaluation of Fast Reactor Components

    International Nuclear Information System (INIS)

    Chandramouli, S.; Kumar, V.A. Suresh; Shanmugavel, M.; Vijayakumar, G.; Vinod, V.; Noushad, I.B.; Babu, B.; Kumar, G. Padma; Nashine, B.K.; Rajan, K.K.

    2013-01-01

    Brief details about various experimental facilities catering to the testing and performance evaluation requirements of fast reactor components have been brought out. These facilities have been found to be immensely useful to continue research and development activities in the areas of component development and testing, sodium technology, thermal hydraulics and sodium instrumentation for the SFR’s. In addition new facilities which have been planned will be of great importance for the developmental activities related to future SFR’s

  7. Evaluation of cutting force uncertainty components in turning

    DEFF Research Database (Denmark)

    Axinte, Dragos Aurelian; Belluco, Walter; De Chiffre, Leonardo

    2000-01-01

    A procedure is proposed for the evaluation of those uncertainty components of a single cutting force measurement in turning that are related to the contributions of the dynamometer calibration and the cutting process itself. Based on an empirical model including errors form both sources......, the uncertainty for a single measurement of cutting force is presented, and expressions for the expected uncertainty vs. cutting parameters are proposed. This approach gives the possibility of evaluating cutting force uncertainty components in turning, for a defined range of cutting parameters, based on few...

  8. Design of reactor components (non replaceable) of 500 MWe PHWR for enhanced life

    International Nuclear Information System (INIS)

    Dwivedi, K.P.; Seth, V.K.

    1994-01-01

    A nuclear power station is characterised by large initial cost and low operating cost. So a plant which is capable of operating for a longer period of time will be economically more attractive. In the past approach had been to design a nuclear power plant for 30 to 40 years of life time. However, with the improvement in technology and incorporation of redundant and diverse safety features it is now possible to design a nuclear power plant for longer life. Now internationally it is being realised that without sacrificing safety features, plant life should be extended till the cost of maintenance or refurbishment is larger than the cost of the replacement capacity. In order to meet the objective of long life, for the components which cannot be easily replaced the life time of about 100 years is being considered as the design objective. For other items replacement, layout space, shielding, access route and lifting capacity and component design are receiving additional emphasis so as to provide a long total station life time. With the above background, design improvements to enhance the life of reactor components for 500 MWe PHWR namely calandria, end shields and calandria vault liners which cannot be replaced and on which any repair is extremely difficult, have been made. This paper deals with design life of these components and the modifications incorporated in the design. (author). 3 refs., 2 tabs., 3 figs

  9. Computational models for residual creep life prediction of power plant components

    International Nuclear Information System (INIS)

    Grewal, G.S.; Singh, A.K.; Ramamoortry, M.

    2006-01-01

    All high temperature - high pressure power plant components are prone to irreversible visco-plastic deformation by the phenomenon of creep. The steady state creep response as well as the total creep life of a material is related to the operational component temperature through, respectively, the exponential and inverse exponential relationships. Minor increases in the component temperature can thus have serious consequences as far as the creep life and dimensional stability of a plant component are concerned. In high temperature steam tubing in power plants, one mechanism by which a significant temperature rise can occur is by the growth of a thermally insulating oxide film on its steam side surface. In the present paper, an elegantly simple and computationally efficient technique is presented for predicting the residual creep life of steel components subjected to continual steam side oxide film growth. Similarly, fabrication of high temperature power plant components involves extensive use of welding as the fabrication process of choice. Naturally, issues related to the creep life of weldments have to be seriously addressed for safe and continual operation of the welded plant component. Unfortunately, a typical weldment in an engineering structure is a zone of complex microstructural gradation comprising of a number of distinct sub-zones with distinct meso-scale and micro-scale morphology of the phases and (even) chemistry and its creep life prediction presents considerable challenges. The present paper presents a stochastic algorithm, which can be' used for developing experimental creep-cavitation intensity versus residual life correlations for welded structures. Apart from estimates of the residual life in a mean field sense, the model can be used for predicting the reliability of the plant component in a rigorous probabilistic setting. (author)

  10. Research on Air Quality Evaluation based on Principal Component Analysis

    Science.gov (United States)

    Wang, Xing; Wang, Zilin; Guo, Min; Chen, Wei; Zhang, Huan

    2018-01-01

    Economic growth has led to environmental capacity decline and the deterioration of air quality. Air quality evaluation as a fundamental of environmental monitoring and air pollution control has become increasingly important. Based on the principal component analysis (PCA), this paper evaluates the air quality of a large city in Beijing-Tianjin-Hebei Area in recent 10 years and identifies influencing factors, in order to provide reference to air quality management and air pollution control.

  11. Evaluation of aging of cast stainless steel components

    International Nuclear Information System (INIS)

    Chung, H.M.

    1991-02-01

    Cast stainless steel is used extensively in nuclear reactors for primary-pressure-boundary components such as primary coolant pipes, elbows, valves, pumps, and safe ends. These components are, however, susceptible to thermal aging embrittlement in light water reactors because of the segregation of Cr atoms from Fe and Ni by spinodal decomposition in ferrite and the precipitation of Cr-rich carbides on ferrite/austenite boundaries. A recent advance in understanding the aging kinetics is presented. Aging kinetics are strongly influenced by the synergistic effects of other metallurgical reactions that occur in parallel with spinodal decomposition, i.e., clustering of Ni, Mo, and Si solute atoms and the nucleation and growth of G-phase precipitates in the ferrite phase. A number of methods are outlined for estimating aging embrittlement under end-of-life of life-extension conditions, depending on several factors such as degree of permissible conservatism, availability of component archive material, and methods of estimating and verifying the activation energy of aging. 33 refs., 6 figs., 3 tabs

  12. Evaluating fire-damaged components of historic covered bridges

    Science.gov (United States)

    Brian Kukay; Charles Todd; Tyler Jahn; Jenson Sannon; Logan Dunlap; Robert White; Mark Dietenberger

    2016-01-01

    Arson continues to claim many historic covered bridges. Site-specific, post-fire evaluations of the structural integrity of a bridge are often necessary in a fire’s aftermath. Decisions on whether individual wood components can be rehabilitated, reconstructed, or replaced must be made. This report includes coverage of existing approaches and exploratory approaches that...

  13. Fracture mechanics and fatigue evaluation of nuclear reactor components

    International Nuclear Information System (INIS)

    Mattar Neto, Miguel; Andrade, Arnaldo H.P. de; Maneschy, Eduardo

    1995-01-01

    This paper presents a theoretical study available in the available literature for evaluation the environmental effects on the lifetime of nuclear power plant components. The author's motivation is to provide some technical tools to identify what research development could be done in this area

  14. Inservice inspection of heavy water plants - a tool in assessing damage to components and life extension

    International Nuclear Information System (INIS)

    Subramanian, C.V.; Thavasimuthu, M.; Bhattacharys, D.K.; Baldev Raj

    1994-01-01

    Any system and its components are expected to give trouble free service over a certain period of time known as life time. The life time is estimated during the design stage. To achieve the design life, certain level of quality are to be defined and this quality has to be worked into the components by proper fabrication processes and their compliance with quality are to be checked. In addition, one has to guard against initiation or propagation of defects which may occur due to normal and abnormal service conditions. Non-destructive test (NDT) techniques are widely used for finding the health of the component. The role of NDT extends from the production stage to the entire life period of the system. This paper highlights the periodic in-service inspection (ISI) carried out on various components of the Heavy Water Plants (HWP) in India in assessing the integrity of the components and predicting the life of the components. (author). 3 refs., 4 figs

  15. Statistical analysis of manufacturing defects on fatigue life of wind turbine casted Component

    DEFF Research Database (Denmark)

    Rafsanjani, Hesam Mirzaei; Sørensen, John Dalsgaard; Mukherjee, Krishnendu

    2014-01-01

    Wind turbine components experience heavily variable loads during its lifetime and fatigue failure is a main failure mode of casted components during their design working life. The fatigue life is highly dependent on the microstructure (grain size and graphite form and size), number, type, location...... and size of defects in the casted components and is therefore rather uncertain and needs to be described by stochastic models. Uncertainties related to such defects influence prediction of the fatigue strengths and are therefore important in modelling and assessment of the reliability of wind turbine...... for the fatigue life, namely LogNormal and Weibull distributions. The statistical analyses are performed using the Maximum Likelihood Method and the statistical uncertainty is estimated. Further, stochastic models for the fatigue life obtained from the statistical analyses are used for illustration to assess...

  16. Evaluating Current Practices in Shelf Life Estimation.

    Science.gov (United States)

    Capen, Robert; Christopher, David; Forenzo, Patrick; Huynh-Ba, Kim; LeBlond, David; Liu, Oscar; O'Neill, John; Patterson, Nate; Quinlan, Michelle; Rajagopalan, Radhika; Schwenke, James; Stroup, Walter

    2018-02-01

    The current International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) methods for determining the supported shelf life of a drug product, described in ICH guidance documents Q1A and Q1E, are evaluated in this paper. To support this evaluation, an industry data set is used which is comprised of 26 individual stability batches of a common drug product where most batches are measured over a 24 month storage period. Using randomly sampled sets of 3 or 6 batches from the industry data set, the current ICH methods are assessed from three perspectives. First, the distributional properties of the supported shelf lives are summarized and compared to the distributional properties of the true shelf lives associated with the industry data set, assuming the industry data set represents a finite population of drug product batches for discussion purposes. Second, the results of the ICH "poolability" tests for model selection are summarized and the separate shelf life distributions from the possible alternative models are compared. Finally, the ICH methods are evaluated in terms of their ability to manage risk. Shelf life estimates that are too long result in an unacceptable percentage of nonconforming batches at expiry while those that are too short put the manufacturer at risk of possibly having to prematurely discard safe and efficacious drug product. Based on the analysis of the industry data set, the ICH-recommended approach did not produce supported shelf lives that effectively managed risk. Alternative approaches are required.

  17. Principal component approach in variance component estimation for international sire evaluation

    Directory of Open Access Journals (Sweden)

    Jakobsen Jette

    2011-05-01

    Full Text Available Abstract Background The dairy cattle breeding industry is a highly globalized business, which needs internationally comparable and reliable breeding values of sires. The international Bull Evaluation Service, Interbull, was established in 1983 to respond to this need. Currently, Interbull performs multiple-trait across country evaluations (MACE for several traits and breeds in dairy cattle and provides international breeding values to its member countries. Estimating parameters for MACE is challenging since the structure of datasets and conventional use of multiple-trait models easily result in over-parameterized genetic covariance matrices. The number of parameters to be estimated can be reduced by taking into account only the leading principal components of the traits considered. For MACE, this is readily implemented in a random regression model. Methods This article compares two principal component approaches to estimate variance components for MACE using real datasets. The methods tested were a REML approach that directly estimates the genetic principal components (direct PC and the so-called bottom-up REML approach (bottom-up PC, in which traits are sequentially added to the analysis and the statistically significant genetic principal components are retained. Furthermore, this article evaluates the utility of the bottom-up PC approach to determine the appropriate rank of the (covariance matrix. Results Our study demonstrates the usefulness of both approaches and shows that they can be applied to large multi-country models considering all concerned countries simultaneously. These strategies can thus replace the current practice of estimating the covariance components required through a series of analyses involving selected subsets of traits. Our results support the importance of using the appropriate rank in the genetic (covariance matrix. Using too low a rank resulted in biased parameter estimates, whereas too high a rank did not result in

  18. Strategy for determining life expectancy in mechanical components in an overall system

    International Nuclear Information System (INIS)

    Tenckhoff, E.; Erve, M.

    1990-01-01

    The safety standard at a nuclear power station achieved at the time of commissioning on the basis of the state of the art during the design and construction stage has to be maintained over the entire working life of the unit. Original design life expectancy is under review in the light of new safety experience and developments. The results of such analysis can serve not only preventive maintenance purposes but also as the basis for supporting and extending the planned or approved working life; they help increase availability. A comprehensive analysis strategy to establish the actual condition and residual life expectancy of components, systems and complete units has been developed by Siemens/KWU. The results of this analysis can lead to action to extend the life expectancy of components and systems and improvements in systems and subsystems. This report quotes a number of examples. 6 figs

  19. On the structural integrity evaluation about aged components

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    About one third of the nuclear power plants in Japan have been operated more than 30 years and flaws due to age-related degradation mechanisms have been detected in some components such as piping systems or core shrouds these years. Moreover, several severe earthquakes such as the Tohoku District - off the Pacific Ocean Earthquake or the Niigata-ken Chuetsu-oki Earthquake have struck some nuclear power plants in Japan recent years. Therefore, the structural integrity evaluation about nuclear installations and components considering seismic loads and aging mechanisms has become more and more important. In this study, several evaluation methods were proposed to assess the crack growth rate under the seismic loading conditions, to assess the failure conditions or the realistic failure capacities of the aged piping systems considering seismic or general loading conditions. Furthermore, analysis codes were developed considering aging mechanisms to carry out the integrity evaluation, or the failure probability evaluation which is useful in the seismic PSA evaluation. All of these assessment methods and analysis codes are being used and will be used more and more in the cross-check analyses or the safety reviews about nuclear installations and components. (author)

  20. Evaluation of pavement life cycle cost analysis: Review and analysis

    Directory of Open Access Journals (Sweden)

    Peyman Babashamsi

    2016-07-01

    Full Text Available The cost of road construction consists of design expenses, material extraction, construction equipment, maintenance and rehabilitation strategies, and operations over the entire service life. An economic analysis process known as Life-Cycle Cost Analysis (LCCA is used to evaluate the cost-efficiency of alternatives based on the Net Present Value (NPV concept. It is essential to evaluate the above-mentioned cost aspects in order to obtain optimum pavement life-cycle costs. However, pavement managers are often unable to consider each important element that may be required for performing future maintenance tasks. Over the last few decades, several approaches have been developed by agencies and institutions for pavement Life-Cycle Cost Analysis (LCCA. While the transportation community has increasingly been utilising LCCA as an essential practice, several organisations have even designed computer programs for their LCCA approaches in order to assist with the analysis. Current LCCA methods are analysed and LCCA software is introduced in this article. Subsequently, a list of economic indicators is provided along with their substantial components. Collecting previous literature will help highlight and study the weakest aspects so as to mitigate the shortcomings of existing LCCA methods and processes. LCCA research will become more robust if improvements are made, facilitating private industries and government agencies to accomplish their economic aims. Keywords: Life-Cycle Cost Analysis (LCCA, Pavement management, LCCA software, Net Present Value (NPV

  1. Developments of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2003-03-15

    The objective of this research is to develop an efficient evaluation technology and to investigate applicability of newly-developed technology, such as internet-based cyber platform, to operating power plants. Development of efficient evaluation systems for Nuclear Power Plant components, based on structural integrity assessment techniques, are increasingly demanded for safe operation with the increasing operating period of Nuclear Power Plants. The following five topics are covered in this project: development of assessment method for wall-thinned nuclear piping based on pipe test; development of structural integrity program for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for mam components of NPP; development of internet-based cyber platform and integrity program for primary components of NPP; effect of aging on strength of dissimilar welds.

  2. Residual life assessment of major LWR components: NPAR approach and results

    International Nuclear Information System (INIS)

    Shah, V.N.; Weidenhamer, G.H.; Vora, J.P.

    1991-01-01

    The nuclear plant aging research (NPAR) program is systematically addressing the technical issues associated with understanding and managing aging of major LWR components. Twenty-one major components have been identified and prioritized according to their relevance to plant safety. Qualitative aging assessment has identified pertinent design features, materials, stressors, environments, aging mechanisms. and failure modes for each of the components. Emerging inspection, surveillance, and monitoring methods to characterize aging damage and mitigation methods to reduce the damage are currently being assessed. The results of all these assessments are used to develop life-assessment procedures for the components and are included in appropriate documents supporting the regulatory requirements for license renewal. (author)

  3. The role of NDE in maintaining and extending the life cycle of engineering components

    International Nuclear Information System (INIS)

    Doctor, S.R.

    1997-01-01

    A successful life cycle of engineering components begins during the design to select the best materials for a given application, designing for economical maintenance, and accommodating NDE inspections. NDE in the nuclear industry is part of the defense in depth to insure structural integrity of components. High reliability NDE is needed to reliably detect and accurately characterize the failure modes that have occurred in nuclear components. The move toward risk-informed inservice inspection programs focusses the NDE on the most safety significant components. The use of performance demonstration testing is leading to improved inservice inspections through screening out ineffective procedure/equipment/personnel. (orig.)

  4. Identification of the key parameters defining the life of graphite core components

    International Nuclear Information System (INIS)

    Mitchell, M.N.

    2005-01-01

    The Core Structures of a Pebble Bed rector core comprise graphite reflectors constructed from blocks. These blocks are subject to high flux and temperatures as well as significant gradients in flux and temperature. This loading combined with the behaviour of graphite under irradiation gives rise to complex stress states within the reflector blocks. At some point, the stress state will reach a critical level and cracks will initiate within the blocks. The point of crack initiation is a useful point to define as the end of the part's life. The life of these graphite reflector parts in a pebble bed reactor (PBR) core determines the service life of the Core Structures. The replacement of the Core Structures' components will be a costly and time consuming. It is important that the components of the Core Structures be designed for the best life possible. As part of the conceptual design of the Pebble Bed Modular Reactor (PBMR), the assessment of the life of these components was examined. To facilitate the understanding of the parameters that influence the design life of the PBMR, a study has been completed into the effect of various design parameters on the design life of a typical side reflector block. Parameters investigated include: block geometry, material property variations, and load variations. The results of this study are to be presented. (author)

  5. Methodology for predicting the life of waste-package materials, and components using multifactor accelerated life tests

    International Nuclear Information System (INIS)

    Thomas, R.E.; Cote, R.W.

    1983-09-01

    Accelerated life tests are essential for estimating the service life of waste-package materials and components. A recommended methodology for generating accelerated life tests is described in this report. The objective of the methodology is to define an accelerated life test program that is scientifically and statistically defensible. The methodology is carried out using a select team of scientists and usually requires 4 to 12 man-months of effort. Specific agendas for the successive meetings of the team are included in the report for use by the team manager. The agendas include assignments for the team scientists and a different set of assignments for the team statistician. The report also includes descriptions of factorial tables, hierarchical trees, and associated mathematical models that are proposed as technical tools to guide the efforts of the design team

  6. Test facility for the evaluation of microwave transmission components

    International Nuclear Information System (INIS)

    Fong, C.G.; Poole, B.R.

    1985-01-01

    A Low Power Test Facility (LPTF) was developed to evaluate the performance of Electron Cyclotron Resonance Heating (ECRH) microwave transmission components for the Mirror Fusion Test Facility (MFTF-B). The facility generates 26 to 60 GHz in modes of TE 01 , TE 02 , or TE 03 launched at power levels of 1/2 milliwatt. The propagation of the rf as it radiates from either transmitting or secondary reflecting microwave transmission components is recorded by a discriminating crystal detector mechanically manipulated at constant radius in spherical coordinates. The facility is used to test, calibrate, and verify the design of overmoded, circular waveguide components, quasi-optical reflecting elements before high power use. The test facility consists of microwave sources and metering components, such as VSWR, power and frequency meters, a rectangular TE 10 to circular TE 01 mode transducer, mode filter, circular TE 01 to 2.5 in. diameter overmoded waveguide with mode converters for combination of TE 01 to TE 03 modes. This assembly then connects to a circular waveguide launcher or the waveguide component under test

  7. Aging management of major LWR components with nondestructive evaluation

    International Nuclear Information System (INIS)

    Shah, V.N.; MacDonald, P.E.; Akers, D.W.; Sellers, C.; Murty, K.L.; Miraglia, P.Q.; Mathew, M.D.; Haggag, F.M.

    1997-01-01

    Nondestructive evaluation of material damage can contribute to continued safe, reliable, and economical operation of nuclear power plants through their current and renewed license period. The aging mechanisms active in the major light water reactor components are radiation embrittlement, thermal aging, stress corrosion cracking, flow-accelerated corrosion, and fatigue, which reduce fracture toughness, structural strength, or fatigue resistance of the components and challenge structural integrity of the pressure boundary. This paper reviews four nondestructive evaluation methods with the potential for in situ assessment of damage caused by these mechanisms: stress-strain microprobe for determining mechanical properties of reactor pressure vessel and cast stainless materials, magnetic methods for estimating thermal aging damage in cast stainless steel, positron annihilation measurements for estimating early fatigue damage in reactor coolant system piping, and ultrasonic guided wave technique for detecting cracks and wall thinning in tubes and pipes and corrosion damage to embedded portion of metal containments

  8. Evaluating fugacity models for trace components in landfill gas

    Energy Technology Data Exchange (ETDEWEB)

    Shafi, Sophie [Integrated Waste Management Centre, Sustainable Systems Department, Building 61, School of Industrial and Manufacturing Science, Cranfield University, Cranfield, Bedfordshire MK43 0AL (United Kingdom); Sweetman, Andrew [Department of Environmental Science, Lancaster University, Lancaster LA1 4YQ (United Kingdom); Hough, Rupert L. [Integrated Waste Management Centre, Sustainable Systems Department, Building 61, School of Industrial and Manufacturing Science, Cranfield University, Cranfield, Bedfordshire MK43 0AL (United Kingdom); Smith, Richard [Integrated Waste Management Centre, Sustainable Systems Department, Building 61, School of Industrial and Manufacturing Science, Cranfield University, Cranfield, Bedfordshire MK43 0AL (United Kingdom); Rosevear, Alan [Science Group - Waste and Remediation, Environment Agency, Reading RG1 8DQ (United Kingdom); Pollard, Simon J.T. [Integrated Waste Management Centre, Sustainable Systems Department, Building 61, School of Industrial and Manufacturing Science, Cranfield University, Cranfield, Bedfordshire MK43 0AL (United Kingdom)]. E-mail: s.pollard@cranfield.ac.uk

    2006-12-15

    A fugacity approach was evaluated to reconcile loadings of vinyl chloride (chloroethene), benzene, 1,3-butadiene and trichloroethylene in waste with concentrations observed in landfill gas monitoring studies. An evaluative environment derived from fictitious but realistic properties such as volume, composition, and temperature, constructed with data from the Brogborough landfill (UK) test cells was used to test a fugacity approach to generating the source term for use in landfill gas risk assessment models (e.g. GasSim). SOILVE, a dynamic Level II model adapted here for landfills, showed greatest utility for benzene and 1,3-butadiene, modelled under anaerobic conditions over a 10 year simulation. Modelled concentrations of these components (95 300 {mu}g m{sup -3}; 43 {mu}g m{sup -3}) fell within measured ranges observed in gas from landfills (24 300-180 000 {mu}g m{sup -3}; 20-70 {mu}g m{sup -3}). This study highlights the need (i) for representative and time-referenced biotransformation data; (ii) to evaluate the partitioning characteristics of organic matter within waste systems and (iii) for a better understanding of the role that gas extraction rate (flux) plays in producing trace component concentrations in landfill gas. - Fugacity for trace component in landfill gas.

  9. Proceedings: 2003 Workshop on Life Cycle Management Planning for Systems, Structures, and Components

    International Nuclear Information System (INIS)

    2003-01-01

    These proceedings of the 2003 EPRI Life Cycle Management Workshop provide nuclear plant owners with an overview of the state of development of methods and tools for performing long-term planning for maintenance, aging management, and obsolescence management of systems, structures, and components important to a plant's long-term safety, power production, and value in a market-driven industry. The proceedings summarize the results of applying life cycle management at several plants

  10. Towards a more consolidated approach to material data management in life assessment of power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Jovanovic, A.; Maile, K. [MPA Stuttgart (Germany)

    1998-12-31

    The presentation discusses the necessity of having a more consolidated (unified, possibly `European`) framework for all (not only pure experimental) material data needed for optimized life management and assessment of high-temperature and other components in power and process plants. After setting the main requirements for such a system, a description of efforts done in this direction at MPA Stuttgart in the area of high-temperature components in power plants is given. Furthermore, a reference to other relevant efforts elsewhere is made and an example of practical application of the proposed solution described (optimized material selection and life assessment of high-temperature piping). (orig.) 10 refs.

  11. Towards a more consolidated approach to material data management in life assessment of power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Jovanovic, A; Maile, K [MPA Stuttgart (Germany)

    1999-12-31

    The presentation discusses the necessity of having a more consolidated (unified, possibly `European`) framework for all (not only pure experimental) material data needed for optimized life management and assessment of high-temperature and other components in power and process plants. After setting the main requirements for such a system, a description of efforts done in this direction at MPA Stuttgart in the area of high-temperature components in power plants is given. Furthermore, a reference to other relevant efforts elsewhere is made and an example of practical application of the proposed solution described (optimized material selection and life assessment of high-temperature piping). (orig.) 10 refs.

  12. AVALIAÇÃO QUÍMICA E FÍSICA DE COMPONENTES DO BARU (Dipteryx alata Vog. PARA ESTUDO DA VIDA DE PRATELEIRA CHEMICAL AND PHYSICAL EVALUATION OF BARU (Dipteryx alata Vog. COMPONENTS FOR SHELF LIFE STUDY

    Directory of Open Access Journals (Sweden)

    Aline Medeiros Alves

    2010-08-01

    such as baru, which is highly genetically variable, but also widely used as a source of income by the regional population. The objective of this study was to evaluate the chemical and physical characteristics of baru pulp, along a 181-day storage period. For that purpose, weight and size analyses, centesimal analysis, monitoring of changes, and sensorial analysis of dry biscuits, in which 25% of the wheat flour was replaced by baru pulp, were carried out. Physical characteristics such as weight, length, and width did not present significant differences, during the storage period. The level of total sugars and reducers increased during the storage period, unlike the tannin level, which decreased. Baru pulp may be considered an important source of sugars and dietary fiber. In addition, the biscuits obtained satisfactory scores for both taste and appearance, on the acceptability test, and their nutritional quality increased.

    KEY-WORDS: Baru; pulp; physical and chemical analyses; kinetics; sensorial analysis.

  13. A methodology for on-line fatigue life monitoring of Indian nuclear power plant components

    International Nuclear Information System (INIS)

    Mukhopadhyay, N.K.; Dutta, B.K.; Kushawaha, H.S.

    1992-01-01

    Fatigue is one of the most important aging effects of nuclear power plant components. Information about accumulation of fatigue helps in assessing structural degradation of the components. This assists in-service inspection and maintenance and may also support future life extension program of a plant. In the present report a methodology is being proposed for monitoring on line fatigue life of nuclear power plant components using available plant instrumentations. Major factors affecting fatigue life of a nuclear power plant components are the fluctuations of temperature, pressure and flow rate. Green's function technique is used in on line fatigue monitoring as computation time is much less than finite element method. A code has been developed which computes temperature and stress Green's functions in 2-D and axisymmetric structure by finite element method due to unit change in various fluid parameters. A post processor has also been developed which computes the temperature and stress responses using corresponding Green's functions and actual fluctuation in fluid parameters. In this post processor, the multiple site problem is solved by superimposing single site Green's function technique. It is also shown that Green's function technique is best suited for on line fatigue life monitoring of nuclear power plant components. (author). 6 refs., 43 figs

  14. Evaluation of microstructure of irradiated fuel channel components of PHWR

    International Nuclear Information System (INIS)

    Ramadasan, E.

    2005-01-01

    Performance evaluation and failure analysis of irradiated reactor structural components such as those in-core and PHT circuit components necessitate metallographic evaluation using special metallographic specimen preparation techniques due to the radiation dose and contamination levels involved in handling the specimens. The metallographic specimen preparation techniques that are resorted to involve use of fully automatic and semi automatic machines, shielded metallographic microscope and specialised equipment developed for lead-cell metallography. The techniques used and the results obtained in the metallographic studies on irradiated fuel channel components such as pressure tubes and garter springs of various Indian PHWRs at RAPS, NAPS and MAPS are presented as case studies in the paper. The evaluation of oxidation and hydriding behaviour of zircaloy-2 pressure tubes and garter springs are presented. The paper also gives in detail the microstructural evaluation of hydride blistering seen at the PT-CT contact location of the pressure tubes of RAPS-2. The evaluation revealed that the hydride blisters was small compared to their length, unlike the hydride blisters seen in the CANDU pressure tube G-16 of Pickering-2. This could be attributed to be due to the difference in the annulus conditions between the two types of reactors. The hydride blisters in J-07 pressure tube of RAPS-2 had ductile material adjacent to them. The paper also gives the hydride blistering observation on irradiated Zr-2.5% Nb-0.5% Cu garter springs of RAPS-2. It was seen that there was only negligible hydriding of the garter springs during service through they showed presence of benign hydride blisters in them. The general hydriding observations made on the pressure tubes of Indian PHWRs under different conditions are also presented. (author)

  15. Development of an aging evaluation and life extension program for the Advanced Test Reactor

    International Nuclear Information System (INIS)

    Dwight, J.E. Jr.

    1988-01-01

    A life extension program has been developed for the US Department of Energy's Advanced Test Reactor. The program is an adaptation of life extension pilot programs at the Surry Unit 1 and Monticello generating stations and is being completed in three phases. In Phase 1, the critical plant components were identified. In Phase 2, existing lifetime analyses and support data for the critical components were reviewed. The results from the review give a preliminary indication that an overall plant lifetime in excess of forty years is feasible. In Phase 3, now in progress, detailed evaluations for component life extensions are being performed. 2 refs., 2 figs., 1 tab

  16. A method for uncertainty quantification in the life prediction of gas turbine components

    Energy Technology Data Exchange (ETDEWEB)

    Lodeby, K.; Isaksson, O.; Jaervstraat, N. [Volvo Aero Corporation, Trolhaettan (Sweden)

    1998-12-31

    A failure in an aircraft jet engine can have severe consequences which cannot be accepted and high requirements are therefore raised on engine reliability. Consequently, assessment of the reliability of life predictions used in design and maintenance are important. To assess the validity of the predicted life a method to quantify the contribution to the total uncertainty in the life prediction from different uncertainty sources is developed. The method is a structured approach for uncertainty quantification that uses a generic description of the life prediction process. It is based on an approximate error propagation theory combined with a unified treatment of random and systematic errors. The result is an approximate statistical distribution for the predicted life. The method is applied on life predictions for three different jet engine components. The total uncertainty became of reasonable order of magnitude and a good qualitative picture of the distribution of the uncertainty contribution from the different sources was obtained. The relative importance of the uncertainty sources differs between the three components. It is also highly dependent on the methods and assumptions used in the life prediction. Advantages and disadvantages of this method is discussed. (orig.) 11 refs.

  17. Life prediction methodology for ceramic components of advanced heat engines. Phase 1: Volume 1, Final report

    Energy Technology Data Exchange (ETDEWEB)

    Cuccio, J.C.; Brehm, P.; Fang, H.T. [Allied-Signal Aerospace Co., Phoenix, AZ (United States). Garrett Engine Div.] [and others

    1995-03-01

    Emphasis of this program is to develop and demonstrate ceramics life prediction methods, including fast fracture, stress rupture, creep, oxidation, and nondestructive evaluation. Significant advancements were made in these methods and their predictive capabilities successfully demonstrated.

  18. The Components of Communication Systems in Universities: Their Influence on Academic Work Life

    Science.gov (United States)

    Uslu, Baris

    2018-01-01

    This research aimed to identify the components of communication systems in universities and to explore their influence on academic life. To collect data, interviews were carried out with academics from Australian universities. Thematic descriptive and content analyses were performed on the data-set. Analyses showed that the human relations unit,…

  19. Effect of Defects Distribution on Fatigue Life of Wind Turbine Components

    DEFF Research Database (Denmark)

    Rafsanjani, Hesam Mirzaei; Sørensen, John Dalsgaard

    2015-01-01

    by a Poisson process / field where the defects form clusters that consist of a parent defect and related defects around the parent defect. The fatigue life is dependent on the number, type, location and size of the defects in the component and is therefore quite uncertain and needs to be described...

  20. Constitutive innate immunity is a component of the pace-of-life syndrome in tropical birds

    NARCIS (Netherlands)

    Tieleman, BI; Williams, JB; Ricklefs, RE; Klasing, KC; Williams, Joseph B.; Ricklefs, Robert E.; Klasing, Kirk C.

    2005-01-01

    We studied the relationship between one component of immune function and basal metabolic rate (BMR), an indicator of the 'pace-of-life syndrome', among 12 tropical bird species and among individuals of the tropical house wren (Troglodytes aedon), to gain insights into functional connections between

  1. Evaluating Spiritual Experiences and Some Psychological Components in Medical Students

    Directory of Open Access Journals (Sweden)

    Zahra Taheri Kharameh

    2017-05-01

    Full Text Available Background: Spiritual experiences seem to be an important component in Religious and spiritual life of some one. Aim of the present study was to determinate relation between daily spiritual experiences, and psychological variables in students of Qom University of Medical Sciences. Methods: In this descriptive and analytical study, 138 students of the Qom University of Medical Sciences were selected via random sampling methods. These students completed the Daily Spiritual Experiences Scale, Depression, Anxiety, Stress Scale (DASS-21 and General Health Questionnaire (GHQ-12. Data were analyzed in SPSS16 software environment utilizing descriptive statistics and the Independent t-test, ANOVA and Pearson correlation coefficient. Results: Mean and standard deviations of daily spiritual experiences scores was 28.27(4.90.  The daily spiritual experiences was associated with mental health (r = -0.22, P-value = 0.01 depression(r = -0.25, P-value = 0.005, and stress (r = -0.23, P-value = 0.01. Conclusion: The findings indicated that spiritual experiences were respectively the most important religious - spiritual components which may affect psychological health in students.

  2. Effect of the combined stress on the life of components under thermal cycling conditions

    International Nuclear Information System (INIS)

    Zuchowski, R.; Zietkowski, L.

    1987-01-01

    The life of structural components subjected to temperature changes is affected, among other factors, by the nature of the stress field. If life prediction for axially stressed components can be accomplished with a number of well established techniques, the behaviour under a complex state of stress and varying temperature conditions still is the object of intensive research. The present study was aimed at assessing the influence of the stress field upon the life of specimens made of chromium-nickel H23N18 steel under thermal cycling conditions. The designation of steel is in accordance with Polish Standards. The experiments were made on thin-walled tubular specimens loaded with various combinations of a static axial force and a static torque. (orig./GL)

  3. Residual life and strength estimates of aircraft structural components with MSD/MED

    Science.gov (United States)

    Singh, Ripudaman; Park, Jai H.; Atluri, Satya N.

    1994-01-01

    Economic and safe operation of the flight vehicles flying beyond their initial design life calls for an in-depth structural integrity evaluation of all components with potential for catastrophic damages. Fuselage panels with cracked skin and/or stiffening elements is one such example. A three level analytical approach is developed to analyze the pressurized fuselage stiffened shell panels with damaged skin or stiffening elements. A global finite element analysis is first carried out to obtain the load flow pattern through the damaged panel. As an intermediate step, the damaged zone is treated as a spatially three-dimensional structure modeled by plate and shell finite elements, with all the neighboring elements that can alter the stress state at the crack tip. This is followed by the Schwartz-Neumann alternating method for local analysis to obtain the relevant crack tip parameters that govern the onset of fracture and the crack growth. The methodology developed is generic in nature and aims at handling a large fraction of problem areas identified by the Industry Committee on Wide-Spread Fatigue Damage.

  4. Accelerated life assessment of coating on the radar structure components in coastal environment.

    Science.gov (United States)

    Liu, Zhe; Ming, ZhiMao

    2016-07-04

    This paper aimed to build an accelerated life test scheme and carry out quantitative analysis between accelerated life test in the laboratory and actual service for the coating composed of epoxy primer and polyurethane paint on structure components of some kind of radar served in the coastal environment of South China Sea. The accelerated life test scheme was built based on the service environment and failure analysis of the coating. The quantitative analysis between accelerated life test and actual service was conducted by comparing the gloss loss, discoloration, chalking, blistering, cracking and electrochemical impedance spectroscopy of the coating. The main factors leading to the coating failure were ultraviolet radiation, temperature, moisture, salt fog and loads, the accelerated life test included ultraviolet radiation, damp heat, thermal shock, fatigue and salt spray. The quantitative relationship was that one cycle of the accelerated life test was equal to actual service for one year. It was established that one cycle of the accelerated life test was equal to actual service for one year. It provided a precise way to predict actual service life of newly developed coatings for the manufacturer.

  5. Evaluation of the RELAP5/MOD3 multidimensional component model

    International Nuclear Information System (INIS)

    Tomlinson, E.T.; Rens, T.E.; Coffield, R.D.

    1994-01-01

    Accurate plenum predictions, which are directly related to the mixing models used, are an important plant modeling consideration because of the consequential impact on basic transient performance calculations for the integrated system. The effect of plenum is a time shift between inlet and outlet temperature changes to the particular volume. Perfect mixing, where the total volume interacts instantaneously with the total inlet flow, does not occur because of effects such as inlet/outlet nozzle jetting, flow stratification, nested vortices within the volume and the general three-dimensional velocity distribution of the flow field. The time lag which exists between the inlet and outlet flows impacts the predicted rate of temperature change experienced by various plant system components and this impacts local component analyses which are affected by the rate of temperature change. This study includes a comparison of two-dimensional plenum mixing predictions using CFD-FLOW3D, RELAP5/MOD3 and perfect mixing models. Three different geometries (flat, square and tall) are assessed for scalar transport times using a wide range of inlet velocity and isothermal conditions. In addition, the three geometries were evaluated for low flow conditions with the inlet flow experiencing a large step temperature decrease. A major conclusion from this study is that the RELAP5/MOD3 multidimensional component model appears to be adequately predicting plenum mixing for a wide range of thermal-hydraulic conditions representative of plant transients

  6. State of the Art in Life Assessment for High Temperature Components Using Replication Method

    International Nuclear Information System (INIS)

    Kim, Duck Hee; Choi, Hyun Sun

    2010-01-01

    The power generation and chemical industry have been subjected to further material degradation with long term operations and need to predict the remaining service life of components, such as reformer tube and turbine rotor, that have operated at elevated temperatures. As a non-destructive technique, replication method with reliable metallurgical life and microstructural soundness assessment has been recognized with strongly useful method until now. Developments of this method have variously accomplished by new quantitative approach, such as carbide analysis, with A-parameter and grain deformation method. An overview of replication, some new techniques for material degradation and life assessment were introduced in this paper. Also, on-site applications and its reasonableness were described. As a result of having analyzed microstructure by replication method, carbide approach was quantitatively useful to life assessment

  7. Decrudding and chemical cleaning of carbon steel components - an evaluation

    International Nuclear Information System (INIS)

    Gaonkar, K.B.; Elayathu, N.S.D.; Shibad, P.R.; Gadiyar, H.S.

    1982-01-01

    Corrosion and accumulation of corrosion products on the surfaces of structural components and plant equipments can cause se vereoperational problems during service. An illustration is the heat exchanger systems in nuclear power stations. Development and standardisation of appropriate chemical cleaning and decontamination procedures and their evaluation hence merit serious consideration. A number of chemical cleaning procedures using formulations based on hydrochloric and citric acid solutions have been examined to study their crud dissolving and derusting ability in addition to the attack on base material. The compositions were chosen: (1) along with complexing agents EDTA and ammonium citrate, (2) with pH control, and (3) with the use of inhibitors acridine, rhodine, hexamine and phenyl-thiourea. The evaluations have been made at 28 and 60 deg C. Rusted carbon steel coupons having a rust of 10-12 mg/cm 2 on the surface have been used for the purpose of the above evaluations. Data on corrosion rates of monel and cupronickel (70:30) in the descaling solutions have also been presented. Results on the above evaluation studies have been discussed. (author)

  8. Thermal aging of some decommissioned reactor components and methodology for life prediction

    International Nuclear Information System (INIS)

    Chung, H.M.

    1989-03-01

    Since a realistic aging of cast stainless steel components for end-of-life or life-extension conditions cannot be produced, it is customary to simulate the thermal aging embrittlement by accelerated aging at ∼400 degree C. In this investigation, field components obtained from decommissioned reactors have been examined after service up to 22 yr to provide a benchmark of the laboratory simulation. The primary and secondary aging processes were found to be identical to those of the laboratory-aged specimens, and the kinetic characteristics were also similar. The extent of the aging embrittlement processes and other key factors that are known to influence the embrittlement kinetics have been compared for the decommissioned reactor components and materials aged under accelerated conditions. On the basis of the study, a mechanistic understanding of the causes of the complex behavior in kinetics and activation energy of aging (i.e., the temperature dependence of aging embrittlement between the accelerated and reactor-operating conditions) is presented. A mechanistic correlation developed thereon is compared with a number of available empirical correlations to provide an insight for development of a better methodology of life prediction of the reactor components. 18 refs., 18 figs., 5 tabs

  9. Ames life science telescience testbed evaluation

    Science.gov (United States)

    Haines, Richard F.; Johnson, Vicki; Vogelsong, Kristofer H.; Froloff, Walt

    1989-01-01

    Eight surrogate spaceflight mission specialists participated in a real-time evaluation of remote coaching using the Ames Life Science Telescience Testbed facility. This facility consisted of three remotely located nodes: (1) a prototype Space Station glovebox; (2) a ground control station; and (3) a principal investigator's (PI) work area. The major objective of this project was to evaluate the effectiveness of telescience techniques and hardware to support three realistic remote coaching science procedures: plant seed germinator charging, plant sample acquisition and preservation, and remote plant observation with ground coaching. Each scenario was performed by a subject acting as flight mission specialist, interacting with a payload operations manager and a principal investigator expert. All three groups were physically isolated from each other yet linked by duplex audio and color video communication channels and networked computer workstations. Workload ratings were made by the flight and ground crewpersons immediately after completing their assigned tasks. Time to complete each scientific procedural step was recorded automatically. Two expert observers also made performance ratings and various error assessments. The results are presented and discussed.

  10. Contribution to life-time predictions of gas turbine components under cyclic load

    Energy Technology Data Exchange (ETDEWEB)

    Hoelscher, R.

    1982-02-15

    The low cycle fatique life of gas turbine components is analysed using the turbine blade of the ATAR 101 F jet engine turbine as example. The results show that, among other things thermal stresses during start-up and shut-off cause considerable damage to the material. Tests using a model rig showed that damage caused by material creep and LCF-mechanisms stongly depended on cyclic parameters such as temperature, temperature development, and power etc. Two long-term tests confirm that the Manson model can be used to give a reasonable prediction of turbine blade life.

  11. Evaluating the Dominant Components of Warming in Pliocene Climate Simulations

    Science.gov (United States)

    Hill, D. J.; Haywood, A. M.; Lunt, D. J.; Hunter, S. J.; Bragg, F. J.; Contoux, C.; Stepanek, C.; Sohl, L.; Rosenbloom, N. A.; Chan, W.-L.; hide

    2014-01-01

    The Pliocene Model Intercomparison Project (PlioMIP) is the first coordinated climate model comparison for a warmer palaeoclimate with atmospheric CO2 significantly higher than pre-industrial concentrations. The simulations of the mid-Pliocene warm period show global warming of between 1.8 and 3.6 C above pre-industrial surface air temperatures, with significant polar amplification. Here we perform energy balance calculations on all eight of the coupled ocean-atmosphere simulations within PlioMIP Experiment 2 to evaluate the causes of the increased temperatures and differences between the models. In the tropics simulated warming is dominated by greenhouse gas increases, with the cloud component of planetary albedo enhancing the warming in most of the models, but by widely varying amounts. The responses to mid-Pliocene climate forcing in the Northern Hemisphere midlatitudes are substantially different between the climate models, with the only consistent response being a warming due to increased greenhouse gases. In the high latitudes all the energy balance components become important, but the dominant warming influence comes from the clear sky albedo, only partially offset by the increases in the cooling impact of cloud albedo. This demonstrates the importance of specified ice sheet and high latitude vegetation boundary conditions and simulated sea ice and snow albedo feedbacks. The largest components in the overall uncertainty are associated with clouds in the tropics and polar clear sky albedo, particularly in sea ice regions. These simulations show that albedo feedbacks, particularly those of sea ice and ice sheets, provide the most significant enhancements to high latitude warming in the Pliocene.

  12. Risk-based management of remaining life of power plant components

    International Nuclear Information System (INIS)

    Roos, E.; Jovanovic, A.S.; Maile, K.; Auerkari, P.

    1999-01-01

    The paper describes application of different modules of the MPA-System ALIAS in risk-based management of remaining life of power plant components. The system allows comprehensive coverage of all aspects of the remaining life management, including also the risk analysis and risk management. In addition, thanks to the modular character of the system it is also possible to implement new methods: In the case described here, a new (probabilistic) method for determination of the next inspection time for the components exposed to creep loading has been developed and implemented in the system. Practical application of the method has shown (a) that the mean values obtained by the method fall into the range of results obtained by other methods (based on expert knowledge), and (b) that it is possible to quantify the probability of aberration from the mean values. This in turn allows quantifying the additional risks linked to e.g. prolonging of inspection intervals. (orig.) [de

  13. Self-assembly kinetics of microscale components: A parametric evaluation

    Science.gov (United States)

    Carballo, Jose M.

    The goal of the present work is to develop, and evaluate a parametric model of a basic microscale Self-Assembly (SA) interaction that provides scaling predictions of process rates as a function of key process variables. At the microscale, assembly by "grasp and release" is generally challenging. Recent research efforts have proposed adapting nanoscale self-assembly (SA) processes to the microscale. SA offers the potential for reduced equipment cost and increased throughput by harnessing attractive forces (most commonly, capillary) to spontaneously assemble components. However, there are challenges for implementing microscale SA as a commercial process. The existing lack of design tools prevents simple process optimization. Previous efforts have characterized a specific aspect of the SA process. However, the existing microscale SA models do not characterize the inter-component interactions. All existing models have simplified the outcome of SA interactions as an experimentally-derived value specific to a particular configuration, instead of evaluating it outcome as a function of component level parameters (such as speed, geometry, bonding energy and direction). The present study parameterizes the outcome of interactions, and evaluates the effect of key parameters. The present work closes the gap between existing microscale SA models to add a key piece towards a complete design tool for general microscale SA process modeling. First, this work proposes a simple model for defining the probability of assembly of basic SA interactions. A basic SA interaction is defined as the event where a single part arrives on an assembly site. The model describes the probability of assembly as a function of kinetic energy, binding energy, orientation and incidence angle for the component and the assembly site. Secondly, an experimental SA system was designed, and implemented to create individual SA interactions while controlling process parameters independently. SA experiments

  14. Theoretical modeling and experimental study on fatigue initiation life of 16MnR notched components

    International Nuclear Information System (INIS)

    Wang Xiaogui; Gao Zengliang; Qiu Baoxiang; Jiang Yanrao

    2010-01-01

    In order to investigate the effects of notch geometry and loading conditions on the fatigue initiation life and fatigue fracture life of 16MnR material, fatigue experiments were conducted for both smooth rod specimens and notched rod specimens. The detailed elastic-plastic stress and strain responses were computed by the finite element software (ABAQUS) incorporating a robust cyclic plasticity model via a user subroutine UMAT. The obtained stresses and strains were applied to the multiaxial fatigue damage criterion to compute the fatigue damage induced by a loading cycle on the critical material plane. The fatigue initiation life was then obtained by the proposed theoretical model. The well agreement between the predicted results and the experiment data indicated that the fatigue initiation of notched components in the multiaxial stress state related to all the nonzero stress and strain quantities. (authors)

  15. Probabilistic evaluation of uncertainties and risks in aerospace components

    Science.gov (United States)

    Shah, A. R.; Shiao, M. C.; Nagpal, V. K.; Chamis, C. C.

    1992-01-01

    This paper summarizes a methodology developed at NASA Lewis Research Center which computationally simulates the structural, material, and load uncertainties associated with Space Shuttle Main Engine (SSME) components. The methodology was applied to evaluate the scatter in static, buckling, dynamic, fatigue, and damage behavior of the SSME turbo pump blade. Also calculated are the probability densities of typical critical blade responses, such as effective stress, natural frequency, damage initiation, most probable damage path, etc. Risk assessments were performed for different failure modes, and the effect of material degradation on the fatigue and damage behaviors of a blade were calculated using a multi-factor interaction equation. Failure probabilities for different fatigue cycles were computed and the uncertainties associated with damage initiation and damage propagation due to different load cycle were quantified. Evaluations on the effects of mistuned blades on a rotor were made; uncertainties in the excitation frequency were found to significantly amplify the blade responses of a mistuned rotor. The effects of the number of blades on a rotor were studied. The autocorrelation function of displacements and the probability density function of the first passage time for deterministic and random barriers for structures subjected to random processes also were computed. A brief discussion was included on the future direction of probabilistic structural analysis.

  16. Evaluation of components and systems of RSG-GAS and developing of maintenance evaluation software

    International Nuclear Information System (INIS)

    Pane, Jupiter-Sitorus; Kadarusmanto

    2003-01-01

    In order to enhance the evaluation of components and systems, inventarization of failure and repair data has been performed. The evaluation was done by calculating distribution function of failure, failure rate, MTTF, MTTR, and unavailability. The evaluation was comprehend in a code program of SYSCOM-RSG-GAS, that are able to performed statistical analysis, reliability parameters, and Fault Tree Analysis. This paper will describe some results of the program

  17. Hospital executive leadership: a critical component for improving care at the end of life.

    Science.gov (United States)

    Cooney, James P; Landers, Glenn M; Williams, Julianna M

    2002-01-01

    End-of-life care and its planning by individuals, in concert with their families and professional healthcare givers, pose important social, legal, and ethical issues. The authors evaluate the results of a multi-year (1997-2001) collaborative effort among representatives of Georgia healthcare providers, healthcare payers, and the general public that was designed to (a) improve end-of-life care through a community-focused field effort to increase public awareness, execution, and institutional management of advance directives and (b) impact institutional and state government systems and policies around end-of-life care. The authors conclude that a proactive presence of senior management is integral in implementing systematic change in hospital-based end-of-life care and offer practical recommendations to hospital leaders to affect real change in their institutions.

  18. Evaluating the hydrological consistency of satellite based water cycle components

    KAUST Repository

    Lopez Valencia, Oliver Miguel

    2016-06-15

    Advances in multi-satellite based observations of the earth system have provided the capacity to retrieve information across a wide-range of land surface hydrological components and provided an opportunity to characterize terrestrial processes from a completely new perspective. Given the spatial advantage that space-based observations offer, several regional-to-global scale products have been developed, offering insights into the multi-scale behaviour and variability of hydrological states and fluxes. However, one of the key challenges in the use of satellite-based products is characterizing the degree to which they provide realistic and representative estimates of the underlying retrieval: that is, how accurate are the hydrological components derived from satellite observations? The challenge is intrinsically linked to issues of scale, since the availability of high-quality in-situ data is limited, and even where it does exist, is generally not commensurate to the resolution of the satellite observation. Basin-scale studies have shown considerable variability in achieving water budget closure with any degree of accuracy using satellite estimates of the water cycle. In order to assess the suitability of this type of approach for evaluating hydrological observations, it makes sense to first test it over environments with restricted hydrological inputs, before applying it to more hydrological complex basins. Here we explore the concept of hydrological consistency, i.e. the physical considerations that the water budget impose on the hydrologic fluxes and states to be temporally and spatially linked, to evaluate the reproduction of a set of large-scale evaporation (E) products by using a combination of satellite rainfall (P) and Gravity Recovery and Climate Experiment (GRACE) observations of storage change, focusing on arid and semi-arid environments, where the hydrological flows can be more realistically described. Our results indicate no persistent hydrological

  19. Guarantee of remaining life time. Integrity of mechanical components and control of ageing phenomena

    International Nuclear Information System (INIS)

    Schuler, X.; Herter, K.H.; Koenig, G.

    2012-01-01

    The life time of safety relevant systems, structures and components (SSC) of Nuclear Power Plants (NPP) is determined by two main principles. First of all the required quality has to be produced during the design and fabrication process. This means that quality has to be produced and can't be improved by excessive inspections (Basis Safety - quality through production principle). The second one is assigned to the initial quality which has to be maintained during operation. This concerns safe operation during the total life time (life time management), safety against ageing phenomena (AM - ageing management) as well as proof of integrity (e.g. break preclusion or avoidance of fracture for SSC with high safety relevance). Initiated by the Fukushima Dai-ichi event in Japan in spring 2011 for German NPP's Long Term Operation (LTO) is out of question. In June 2011 legislation took decision to phase-out from nuclear by 2022. As a fact safe operation shall be guaranteed for the remaining life time. Within this technical framework the ageing management is a key element. Depending on the safety-relevance of the SSC under observation including preventive maintenance various tasks are required in particular to clarify the mechanisms which contribute systemspecifically to the damage of the components and systems and to define their controlling parameters which have to be monitored and checked. Appropriate continuous or discontinuous measures are to be considered in this connection. The approach to ensure a high standard of quality in operation for the remaining life time and the management of the technical and organizational aspects are demonstrated and explained. The basis for ageing management to be applied to NNPs is included in Nuclear Safety Standard 1403 which describes the ageing management procedures. For SSC with high safety relevance a verification analysis for rupture preclusion (proof of integrity, integrity concept) shall be performed (Nuclear Safety Standard 3206

  20. Evaluation of quality of life in oncology clinic

    International Nuclear Information System (INIS)

    Jarema, A.; Marzecki, Z.

    1994-01-01

    In 18 patients with various malignancies the quality of life was evaluated with the use of the SF-36 questionnaire before and after radiotherapy. The quality of life was better among patients whose physical condition was better both before and after radiotherapy. The quality of life deteriorated after radiotherapy in patients whose physical status before treatment was evaluated as more serious. After the treatment the correlation was found between the global evaluation of quality of life and the intensity of pain and physical disability. However, both before and after radiotherapy the correlation was found between global quality of life and the severity of depression. The subjective estimation of quality of life by cancer patients did not correlate with the clinical evaluation of the severity of their state in doctor's opinion. (author)

  1. Life Cycle Management Managing the Aging of Critical Nuclear Plant Components

    International Nuclear Information System (INIS)

    Meyer, Theodore A.; Elder, G. Gary; Llovet, Ricardo

    2002-01-01

    Life Cycle Management is a structured process to manage equipment aging and long-term equipment reliability for nuclear plant Systems, Structures and Components (SSCs). The process enables the identification of effective repair, replace, inspect, test and maintenance activities and the optimal timing of the activities to maximize the economic value to the nuclear plant. This paper will provide an overview of the process and some of the tools that can be used to implement the process for the SSCs deemed critical to plant safety and performance objectives. As nuclear plants strive to reduce costs, extend life and maximize revenue, the LCM process and the supporting tools summarized in this paper can enable development of a long term, cost efficient plan to manage the aging of the plant SSCs. (authors)

  2. The construction of life prediction models for the design of Stirling engine heater components

    Science.gov (United States)

    Petrovich, A.; Bright, A.; Cronin, M.; Arnold, S.

    1983-01-01

    The service life of Stirling-engine heater structures of Fe-based high-temperature alloys is predicted using a numerical model based on a linear-damage approach and published test data (engine test data for a Co-based alloy and tensile-test results for both the Co-based and the Fe-based alloys). The operating principle of the automotive Stirling engine is reviewed; the economic and technical factors affecting the choice of heater material are surveyed; the test results are summarized in tables and graphs; the engine environment and automotive duty cycle are characterized; and the modeling procedure is explained. It is found that the statistical scatter of the fatigue properties of the heater components needs to be reduced (by decreasing the porosity of the cast material or employing wrought material in fatigue-prone locations) before the accuracy of life predictions can be improved.

  3. Probabilistic fatigue life prediction methodology for notched components based on simple smooth fatigue tests

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Z. R.; Li, Z. X. [Dept.of Engineering Mechanics, Jiangsu Key Laboratory of Engineering Mechanics, Southeast University, Nanjing (China); Hu, X. T.; Xin, P. P.; Song, Y. D. [State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing (China)

    2017-01-15

    The methodology of probabilistic fatigue life prediction for notched components based on smooth specimens is presented. Weakestlink theory incorporating Walker strain model has been utilized in this approach. The effects of stress ratio and stress gradient have been considered. Weibull distribution and median rank estimator are used to describe fatigue statistics. Fatigue tests under different stress ratios were conducted on smooth and notched specimens of titanium alloy TC-1-1. The proposed procedures were checked against the test data of TC-1-1 notched specimens. Prediction results of 50 % survival rate are all within a factor of two scatter band of the test results.

  4. Lower-Energy Energy Storage System (LEESS) Component Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Gonder, J.; Cosgrove, J.; Shi, Y.; Saxon, A.; Pesaran, A.

    2014-10-01

    Alternate hybrid electric vehicle (HEV) energy storage systems (ESS) such as lithium-ion capacitors (LICs) and electrochemical double-layer capacitor (EDLC) modules have the potential for improved life, superior cold temperature performance, and lower long-term cost projections relative to traditional battery storage systems. If such lower-energy ESS (LEESS) devices can also be shown to maintain high HEV fuel savings, future HEVs designed with these devices could have an increased value proposition relative to conventional vehicles. NREL's vehicle test platform is helping validate the in-vehicle performance capability of alternative LEESS devices and identify unforeseen issues. NREL created the Ford Fusion Hybrid test platform for in-vehicle evaluation of such alternative LEESS devices, bench testing of the initial LIC pack, integration and testing of the LIC pack in the test vehicle, and bench testing and installation of an EDLC module pack. EDLC pack testing will continue in FY15. The in-vehicle LIC testing results suggest technical viability of LEESS devices to support HEV operation. Several LIC configurations tested demonstrated equivalent fuel economy and acceleration performance as the production nickel-metal-hydride ESS configuration across all tests conducted. The lowest energy LIC scenario demonstrated equivalent performance over several tests, although slightly higher fuel consumption on the US06 cycle and slightly slower acceleration performance. More extensive vehicle-level calibration may be able to reduce or eliminate these performance differences. The overall results indicate that as long as critical attributes such as engine start under worst case conditions can be retained, considerable ESS downsizing may minimally impact HEV fuel savings.

  5. Regression to fuzziness method for estimation of remaining useful life in power plant components

    Science.gov (United States)

    Alamaniotis, Miltiadis; Grelle, Austin; Tsoukalas, Lefteri H.

    2014-10-01

    Mitigation of severe accidents in power plants requires the reliable operation of all systems and the on-time replacement of mechanical components. Therefore, the continuous surveillance of power systems is a crucial concern for the overall safety, cost control, and on-time maintenance of a power plant. In this paper a methodology called regression to fuzziness is presented that estimates the remaining useful life (RUL) of power plant components. The RUL is defined as the difference between the time that a measurement was taken and the estimated failure time of that component. The methodology aims to compensate for a potential lack of historical data by modeling an expert's operational experience and expertise applied to the system. It initially identifies critical degradation parameters and their associated value range. Once completed, the operator's experience is modeled through fuzzy sets which span the entire parameter range. This model is then synergistically used with linear regression and a component's failure point to estimate the RUL. The proposed methodology is tested on estimating the RUL of a turbine (the basic electrical generating component of a power plant) in three different cases. Results demonstrate the benefits of the methodology for components for which operational data is not readily available and emphasize the significance of the selection of fuzzy sets and the effect of knowledge representation on the predicted output. To verify the effectiveness of the methodology, it was benchmarked against the data-based simple linear regression model used for predictions which was shown to perform equal or worse than the presented methodology. Furthermore, methodology comparison highlighted the improvement in estimation offered by the adoption of appropriate of fuzzy sets for parameter representation.

  6. Main features of the pressurized component life management related R and D activity in Hungary

    International Nuclear Information System (INIS)

    Gillemot, F.; Oszwald, F.

    1995-01-01

    During the last one and half years the following main developments related to the life-time management of the NPP units took place in Hungary: 1. National project named AGNES (Advanced General New Evaluation of Safety) finished. 2. The first results of the extended surveillance program of NPP Paks has been measured. 3. The upgraded ultrasonic testing equipment used for RPV outside testing, and nozzle testing is regularly used in refuelling periods. 4. Radiation embrittlement and thermal ageing research started on RPV materials, mainly on cladding. 5. Participation in the development of the IAEA RPV ageing database. 6. Participation in IAEA pilot studies on ageing. 7. Operation of the Budapest Research Reactor, and building a new high capacity helium cooled irradiation rig. 8. Nondestructive evaluation of material ageing of a steam generator vessels. 9. A life-time calculation of Paks RPV-s. This report is a short survey of these developments. 19 refs, 4 figs

  7. Component unavailability versus inservice test (IST) interval: Evaluations of component aging effects with applications to check valves

    International Nuclear Information System (INIS)

    Vesely, W.E.; Poole, A.B.

    1997-07-01

    Methods are presented for calculating component unavailabilities when inservice test (IST) intervals are changed and when component aging is explicitly included. The methods extend usual approaches for calculating unavailability and risk effects of changing IST intervals which utilize Probabilistic Risk Assessment (PRA) methods that do not explicitly include component aging. Different IST characteristics are handled including ISTs which are followed by corrective maintenances which completely renew or partially renew the component. ISTs which are not followed by maintenance activities needed to renew the component are also handled. Any downtime associated with IST, including the test downtime and the following maintenance downtime, is included in the unavailability evaluations. A range of component aging behaviors is studied including both linear and nonlinear aging behaviors. Based upon evaluations completed to date, pooled failure data on check valves show relatively small aging (e.g., less than 7% per year). However, data from some plant systems could be evidence for larger aging rates occurring in time periods less than 5 years. The methods are utilized in this report to carry out a range of sensitivity evaluations to evaluate aging effects for different possible applications. Based on the sensitivity evaluations, summary tables are constructed showing how optimal IST interval ranges for check valves can vary relative to different aging behaviors which might exist. The evaluations are also used to identify IST intervals for check valves which are robust to component aging effects. General insights on aging effects are also extracted. These sensitivity studies and extracted results provide useful information which can be supplemented or be updated with plant specific information. The models and results can also be input to PRAs to determine associated risk implications

  8. A Bayesian analysis of component life expectancy and its implications on the inspection schedule

    International Nuclear Information System (INIS)

    Mason, Paolo

    2017-01-01

    A model of crack initiation and residual component life is fitted to the inspection history, inclusive of two in-service failures, of a set of gas circulator impellers at two UK power stations. The model is then used to estimate the probability of future in-service failure of each item in scenarios in which the next opportunity for inspection (i.e. detection of a developing crack) is exploited or forgone. The study takes into account in exact manner both variability and uncertainty. A novel Approximate Bayesian Computation (ABC) methodology is introduced for the quantification of uncertainty, i.e. the sampling of the posterior distribution of the parameters of the model. At the price of the discretization of this distribution, the methodology represents a quickly implemented option in problems where standard ABC rejection sampling is unacceptably inefficient. - Highlights: • A model of crack initiation and residual component life is introduced. • The model is fitted to the inspection log of a set of gas circulator impellers. • The odds of future failure are computed under different inspection schedules. • This prediction informs the choice to perform or forgo future inspection. • A novel Approximate Bayesian Computation algorithm is introduced and validated.

  9. Replacement of major nuclear power plant components for service life extension

    International Nuclear Information System (INIS)

    Novak, S.

    1987-01-01

    Problems are discussed associated with replacement of nuclear power plant components with the aim to extend their original scheduled life. The existing foreign experience shows that it is technically feasible to replace practically all basic components for which the necessity of replacement is established. Data is summed up on the replacement of steam generators in US and West German nuclear power plants showing the duration of the job, the total consumption of manhours, the collective dose equivalent and the cost. Attention is also focused on implemented and projected replacements of circulation pipes in nuclear power plants abroad. Based on these figures, the cost is estimated of the replacement of the reactor vessel and the steam generators for WWER-440 nuclear power plants. The conclusion is arrived at that even based on a conservative estimate, the extension by 20 years of the service life of a nuclear power plant is economically more effective than the construction of a new plant. (Z.M.) 2 tabs., 15 refs., 3 figs

  10. Use of virtual reality for optimizing the life cycle of a fusion component

    Energy Technology Data Exchange (ETDEWEB)

    Keller, D., E-mail: delphine.keller@cea.fr [CEA, IRFM, F-13108 St-Paul-Lez-Durance (France); Doceul, L.; Ferlay, F.; Louison, C.; Pilia, A.; Pavy, K. [CEA, IRFM, F-13108 St-Paul-Lez-Durance (France); Chodorge, L.; Andriot, C. [CEA Saclay – DIGITEO Moulon, DRT/LIST/DIASI/LSI, F-91191 Gif Sur Yvette (France)

    2015-12-15

    Efficient development of a complex system such as a fusion component needs a stringent integration of standard and new constraints. For example, compared to the previous fusion experimental devices, remote handling (RH) and safety requirements are in ITER key parameters which must be integrated since the earliest design. For optimizing such integration studies, CEA, IRFM decided in 2010 to implement the use of virtual reality (VR) tools during the life cycle (from design to operation) of a fusion component. This paper describes a first feedback of such use for fusion engineering purposes. After a short overview of the CEA, IRFM VR platform capabilities, three main uses will be described: design review, simulation of remote handling and hands-on operations, with man in the loop. The Design review mode was intensively used within the framework of a fruitful collaboration with ITER design Integration Team. This mode, fully compatible with CAD software, enables scale one data visualization with stereoscopic rendering. It improves the efficiency in detecting inconsistencies inside models and machine sub-system design optimization needs. Several accessibility cases of major Safety Important Components (SIC-1) were studied giving important requirements to the design at an early stage. CEA, IRFM, in close collaboration with expertise of CEA, LIST for VR simulation software, applies VR technologies for designing RH maintenance scenario for ITER Test Blanket System (TBS) and Ion cyclotron Resonance Heating (ICRH) Port Plugs. RH compatibility studies using VR pointed out major design drivers while helping to propose credible solution. VR platform is intensively used in the design of WEST (Tungsten (W) Environment Steady-state Tokamak) components and assembly studies, providing important information about the feasibility of assembly processes, optimization of physical mock-ups and ergonomic posture and gestures of operator. Finally, new perspectives, as the integration of

  11. Use of virtual reality for optimizing the life cycle of a fusion component

    International Nuclear Information System (INIS)

    Keller, D.; Doceul, L.; Ferlay, F.; Louison, C.; Pilia, A.; Pavy, K.; Chodorge, L.; Andriot, C.

    2015-01-01

    Efficient development of a complex system such as a fusion component needs a stringent integration of standard and new constraints. For example, compared to the previous fusion experimental devices, remote handling (RH) and safety requirements are in ITER key parameters which must be integrated since the earliest design. For optimizing such integration studies, CEA, IRFM decided in 2010 to implement the use of virtual reality (VR) tools during the life cycle (from design to operation) of a fusion component. This paper describes a first feedback of such use for fusion engineering purposes. After a short overview of the CEA, IRFM VR platform capabilities, three main uses will be described: design review, simulation of remote handling and hands-on operations, with man in the loop. The Design review mode was intensively used within the framework of a fruitful collaboration with ITER design Integration Team. This mode, fully compatible with CAD software, enables scale one data visualization with stereoscopic rendering. It improves the efficiency in detecting inconsistencies inside models and machine sub-system design optimization needs. Several accessibility cases of major Safety Important Components (SIC-1) were studied giving important requirements to the design at an early stage. CEA, IRFM, in close collaboration with expertise of CEA, LIST for VR simulation software, applies VR technologies for designing RH maintenance scenario for ITER Test Blanket System (TBS) and Ion cyclotron Resonance Heating (ICRH) Port Plugs. RH compatibility studies using VR pointed out major design drivers while helping to propose credible solution. VR platform is intensively used in the design of WEST (Tungsten (W) Environment Steady-state Tokamak) components and assembly studies, providing important information about the feasibility of assembly processes, optimization of physical mock-ups and ergonomic posture and gestures of operator. Finally, new perspectives, as the integration of

  12. Evaluation of nutritional components by Plackett- Burman design for ...

    African Journals Online (AJOL)

    GREGORY

    2011-12-16

    Dec 16, 2011 ... African Journal of Biotechnology Vol. ... A number of medium components influencing lipase production by Penicillium citrinum (ATCC 42799) ... in the field of bioenergy, especially in biodiesel produc- ..... and algal culture.

  13. The eudaimonic component of satisfaction with life and psychological well-being in Spanish cultures.

    Science.gov (United States)

    Díaz, Darío; Stavraki, María; Blanco, Amalio; Gandarillas, Beatriz

    2015-01-01

    In the study of well-being there are two partially overlapping traditions that have been developed in parallel. Subjective well-being (SWB) has been associated with the hedonistic approach of well-being, and psychological well-being (PWB) with the eudaimonistic one. However, satisfaction with life, the most common SWB indicator, is not strictly a hedonic concept and contains many eudaimonic components. The objective of this research is to examine whether a Eudaimonic Well-being G-Factor of Satisfaction with Life (SWLS) and Psychological Well-being Scales (PWBS) emerges. 400 people from the general population of Colombia (Study 1) and 401 from Spain (Study 2), recruited via advertisement, voluntarily participated and filled in a booklet containing, in order of appearance, the PWBS and the SWLS. According to our hypothesis, parallel analysis, eigenvalues, scree plot graphs and exploratory factor analysis (Study 1) suggested the existence of a one-factor structure. Confirmatory factor analysis (Study 2) indicated that this one-factor model provided excellent data fit. Results of a multi-group confirmatory factor analysis confirmed cross-cultural factor invariance. These results question the view that the satisfaction with life indicator is uniquely hedonic and point to the need for a greater integration between hedonic and eudaimonic traditions.

  14. Measuring service life and evaluating the quality of solid tires

    Directory of Open Access Journals (Sweden)

    Charoenyut Dechwayukul

    2010-08-01

    Full Text Available The objective of this research is to propose procedures for measuring service life and evaluating the quality of locallymade and used solid tires in Thailand. The solid tires were stressed and rotated until blowout on a drum-like test apparatuswhich is designed, constructed by the authors and equipped with laboratory instrumentation. Solid tires from five differentmanufacturers were selected for testing. We measured service life, length of time to tire failure, at three different loadingamplitudes and three different speeds on the testing drum. The service life of all specimens was studied and compared todetermine the possibility of using service life to evaluate the quality of a solid tire.

  15. Snus use during the life-course and risk of the metabolic syndrome and its components.

    Science.gov (United States)

    Byhamre, Marja Lisa; Gustafsson, Per E; Jansson, Jan-Håkan; Wennberg, Maria; Hammarström, Anne; Wennberg, Patrik

    2017-12-01

    We aimed to investigate the association between life-course exposure to snus and prevalence of the metabolic syndrome and its components in adulthood. Tobacco habits at baseline (age 16) and three follow-ups (ages 21, 30 and 43) were assessed among 880 participants in a population-based cohort in Northern Sweden. Presence of the metabolic syndrome at age 43 was ascertained using the International Diabetes Federation criteria. Odds ratios and CIs for risk of the metabolic syndrome and its components by snus use at 16, 21, 30 and 43 years were calculated using logistic regression. Cumulative snus use was defined as number of life periods (1-4) with current snus use. At age 43, 164 participants (18.6%) were current snus users. We found no association between exclusive snus use at the ages of 16, 21, 30 and 43 years and the metabolic syndrome at age 43 years. Snus use (among non-smokers) was associated with raised triglycerides and high blood pressure in crude analysis, but not in multivariable models. There was no association between cumulative snus use and risk of the metabolic syndrome. Cumulative snus use was associated with central obesity, raised triglycerides and impaired fasting glucose/diabetes mellitus type 2 in crude analyses, but not after adjustments. The health consequences of snus exposure from adolescence to mid-adulthood do not seem to include increased risk of the metabolic syndrome or its components. The cardio-metabolic risk of dual exposure to snus and cigarettes may warrant further attention.

  16. The Impact of Stress Urinary Incontinence on Individual Components of Quality of Life in Malaysian Women.

    Science.gov (United States)

    Lim, Renly; Liong, Men Long; Leong, Wing Seng; Lau, Yong Khee; Khan, Nurzalina Abdul Karim; Yuen, Kah Hay

    2018-02-01

    To assess the impact of stress urinary incontinence (SUI) on individual components of quality of life (QoL) using both condition-specific and generic questionnaires, and to compare the results of the 2 instruments with a control group. Women with or without SUI aged ≥21 years old were recruited. Subjects completed the International Consultation of Incontinence-Urinary Incontinence Short Form (ICIQ-UI-SF), International Consultation of Incontinence-Lower Urinary Tract Symptoms Quality of Life (ICIQ-LUTSqol), and EQ-5D questionnaires. A total of 120 women with SUI and 145 controls participated. The ICIQ-LUTSqol total score (mean ± standard deviation) was significantly higher in the SUI group (38.96 ± 10.28) compared with the control group (20.78 ± 2.73) (P women with SUI affected "moderately" or "a lot." When measured using the EQ-5D questionnaire, there were significantly higher percentages of patients with SUI who had problems with usual activities, pain or discomfort, and anxiety or depression (P Women suffering from SUI have significantly poorer QoL compared with continent women when measured using both condition-specific and generic QoL measures. Clinicians should pay closer attention to the impact of SUI on individual components of QoL, particularly limitations on physical activities and jobs, which were the 2 most impairing and frequently reported components of QoL. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. Determining the residual lifetime for the main RBMK components in frame of life extension of power units

    International Nuclear Information System (INIS)

    Baldin, V.D.; Petrov, A.A.; Potapov, A.A.

    2005-01-01

    At present time 11 power units of NPPs with RBMK reactors produce annually 140 billion kWh of electricity, which is about half of all electricity generated at Russian NPPs. Commissioned during the period of 1973 to 1990, they have the specified service life of 30 years. The power units have been regularly upgraded during operation to raise their safety and reliability. As the result now they meet modem requirements in terms of safety and their lifetime can considerably exceed their specified service life. The task of the plant life extension becomes more urgent. The main nonreplaceable RBMK reactor components that determine the reactor life, are graphite stack and metal support structures. The aging of these structures is monitored and the structures residual lifetime is predicted in accordance with procedures approved by regulatory authorities. The lead unit among all RBMK power units is Leningrad NPP Unit 1 commissioned in 1973. A complex of activities was performed for this power unit in 2002-2003 to prove the feasibility of its life extension. In terms of defining the residual lifetime of the reactor components, the activities were performed in three major areas: - examination of the state of the reactor structures; - materials studies of irradiated metal and graphite specimens in hot chambers; - performing the calculation and prediction evaluations. The results of examining the metal structures and studying specimens have shown that: 1)The metal and the welds do not have visible defects. The state of protective coatings is largely satisfactory. 2)The ultimate strength and hardness of steel have grown. 3)The brittle fracture transition temperature shift is at the allowable level. 4)The leak-tightness of the metal structures has not been violated. The results of the graphite stack examination have shown that the graphite is at the hardening stage. No tendency for deterioration of mechanical properties has been recorded. According to the results of measuring the

  18. Structural evaluation of safety class components to natural phenomena loadings

    International Nuclear Information System (INIS)

    Conrads, T.J.

    1989-01-01

    This paper addresses the efforts completed at the US Department of Energy Hanford Site near Richland, Washington, to qualify structurally a number of existing safety class components in the Plutonium Finishing Plant complex. Design, fabrication, and installation of the facility occurred in the 1950s and 1960s and were based on the Uniform Building Code criteria for wind and earthquake loads. Recently the buildings were qualified to site-specific wind and seismic hazards. The methodology employed to qualify seismically the safety class components is discussed

  19. Evaluating Work-Life Balance in the Department of Defense

    Science.gov (United States)

    2011-04-18

    Evaluating Work - Life Balance in the Department of Defense Erin A. Moeser Defense Equal Opportunity Management Institute (DEOMI) Kizzy M. Parks...for service members’ family lives may increase satisfaction with work - life balance . Examples of family-friendly organizational policies include...1,500 active duty military personnel were surveyed on the value of work / life balance initiates. More specifically, this study assessed respondents

  20. Measuring student satisfaction from their satisfaction in life: a relationship of different components.

    Directory of Open Access Journals (Sweden)

    Alfonso Ríos Sánchez

    2015-02-01

    Full Text Available The study sought to find significant satisfaction variables regarding the quality of education concomitantly linked to life satisfaction. It was conducted during 2012-2013, with a population of 235 students of 3rd and 4th graders from Secondary School Education. A measuring instrument based on the sub-dimensional model of comprehensive evaluation and program Scheerens Stufflebeam was created. The ratio of the sub dimensions through regression analysis was studied. Empathy, personal achievements and recognition of success, were the most significant variables as predictors of satisfaction with the quality of education in connection with satisfaction with life. These variables can help us overcome a reduced view on satisfaction, emphasizing areas of school management that can be strengthened and which students consider relevant to their educational development.

  1. Recent development in life management of the pressurised components. National report

    International Nuclear Information System (INIS)

    Gillemot, F.

    1998-01-01

    Hungarian activities concerning NPP life management include government actions, regulatory actions, utility actions, and related research and development. Nuclear Regulatory Body and the National Committee of Atomic Energy were reorganised. New national Code of Safety was issued and the Nuclear Regulatory Committee is sponsoring a series of studies on ageing evaluation and management. NPP Paks started life management program, started several safety enhance actions, revised operation instructions according to enhanced safety requirements, extended surveillance program, built up a new training center. Research actions are concerned with study of thermal ageing, development of PTS methodology, study of welding properties of WWER-440 reactors, participation in IAEA CRP on use of Master curve, use of new IAEA PTS guide, method for crack measurements, elaboration of national database on RPV materials and management of the IAEA RPV database

  2. Evaluation Of Blood Component Request And Ultrasound In ...

    African Journals Online (AJOL)

    Results: A total of 1097 blood component was requested for transfusion. Out of these, 1066 were used and 31 were returned and later discarded due to contamination. The commonest prescribed blood type was whole blood (81.1%) Blood used was higher for obstetrics and gynaecological cases and least for paediatric ...

  3. Evaluation of Integrated High Temperature Component Testing Needs

    Energy Technology Data Exchange (ETDEWEB)

    Rafael Soto; David Duncan; Vincent Tonc

    2009-05-01

    This paper describes the requirements for a large-scale component test capability to support the development of advanced nuclear reactor technology and their adaptation to commercial applications that advance U.S. energy economy, reliability, and security and reduce carbon emissions.

  4. Meaning and components of quality of life among individuals with spinal cord injury in Yogyakarta Province, Indonesia

    NARCIS (Netherlands)

    Ferdiana, Astri; Post, Marcel W M; King, Nigel; Bültmann, Ute; van der Klink, Jac J L

    2018-01-01

    Purpose: Knowledge on the meaning of quality of life in individuals with spinal cord injury in developing countries is limited. This study aims to explore the meaning and components of quality of life for individuals with spinal cord injury in a rural area in Indonesia. Method: Data were obtained

  5. Evaluation of HEPA filter service life

    International Nuclear Information System (INIS)

    Fretthold, J.K.; Stithem, A.R.

    1997-01-01

    Rocky Flats Environmental Technology Site (RFETS), has approximately 10,000 High Efficiency Particulate Air (HEPA) Filters installed in a variety of filter plenums. These ventilation/filtration plenum systems are used to control the release of airborne particulate contaminates to the environment during normal operations and potential accidents. This report summarizes the results of destructive and non-destructive tests on HEPA filters obtained from a wide variety of ages and service conditions. These tests were performed to determine an acceptable service life criteria for HEPA filters used at Rocky Flats Environmental Technology Site (RFETS). A total of 140 filters of various ages (1972 to 1996) and service history (new, aged unused, used) were tested. For the purpose of this report, filter age from manufacture date/initial test date to the current sample date was used, as opposed to the actual time a filter was installed in an operating system

  6. Aging of concrete components and its significance relative to life extension of nuclear power plants

    International Nuclear Information System (INIS)

    Naus, D.J.

    1987-01-01

    Nuclear power currently supplies about 16% of the US electricity requirements, with the percentage expected to rise to 20% by 1990. Despite the increasing role of nuclear power in energy production, cessation of orders for new nuclear plants in combination with expiration of operating licenses for several plants in the next 15 to 20 years results in a potential loss of electrical generating capacity of 50 to 60 gigawatts during the time period 2005 to 2020. A potential timely and cost-effective solution to the problem of meeting future energy demand is available through extension of the service life of existing nuclear plants. Any consideration of plant life extension, however, must consider the concrete components in these plants, since they play a vital safety role. Under the USNRC Nuclear Plant Aging Research (NPAR) Program, a study was conducted to review operating experience and to provide background that will lead to subsequent development of a methodology for assessing and predicting the effects of aging on the performance of concrete-based structures. The approach followed was in conformance with the NPAR strategy

  7. Evaluation of feed components contamination with ochratoxin in Vojvodina

    Directory of Open Access Journals (Sweden)

    Jurić Verica B.

    2005-01-01

    Full Text Available Ochratoxin A is cancerogenic, teratogenetic, immunotoxic and nephrotoxic The mentioned order stresses the importance of this toxin concerning its harm to human health. The harmful effects of ochratoxin A include the effects at molecular level, such as DNA fragmentation, protein synthesis inhibition gluconeogenesis, lipid peroxidation, disorder of oxydative phosphorization in mitochondria, inhibition of blood coagulation and apoptosis. The presence of ochratoxin A in a great number of food samples, both of plant and animal origin, is the obvious risk to human health, which is confirmed by the high incidence of this toxin in samples of human serum and milk. It could be stated, with certainty, that the above - mentioned facts are the reason for which the EU has paid great attention to this mycotoxin in recent years. This paper deals with the results of the analysis of the animal feed component samples for the period 2000-2003 concerning the ochratoxin A content. The analysed feed components were taken from the farms with significant health problems of animals (not monitoring. The samples were analysed by chromatography on a thin layer and with a limited detection method for ochratoxin A of 40 ppb. The analysis was carried out on 108 maize samples, 11 barley samples, 21 wheat samples, 42 sunflower pellets samples and 47 soybean pellets samples (Table 1. The samples of sunflower pellets were contaminated in the greatest percentage, which indicates the inadequate storage of this feed component.

  8. Machine and component residual life estimation through the application of neural networks

    International Nuclear Information System (INIS)

    Herzog, M.A.; Marwala, T.; Heyns, P.S.

    2009-01-01

    This paper concerns the use of neural networks for predicting the residual life of machines and components. In addition, the advantage of using condition-monitoring data to enhance the predictive capability of these neural networks was also investigated. A number of neural network variations were trained and tested with the data of two different reliability-related datasets. The first dataset represents the renewal case where the failed unit is repaired and restored to a good-as-new condition. Data were collected in the laboratory by subjecting a series of similar test pieces to fatigue loading with a hydraulic actuator. The average prediction error of the various neural networks being compared varied from 431 to 841 s on this dataset, where test pieces had a characteristic life of 8971 s. The second dataset were collected from a group of pumps used to circulate a water and magnetite solution within a plant. The data therefore originated from a repaired system affected by reliability degradation. When optimized, the multi-layer perceptron neural networks trained with the Levenberg-Marquardt algorithm and the general regression neural network produced a sum-of-squares error within 11.1% of each other for the renewal dataset. The small number of inputs and poorly mapped input space on the second dataset meant that much larger errors were recorded on some of the test data. The potential for using neural networks for residual life prediction and the advantage of incorporating condition-based data into the model was nevertheless proven for both examples

  9. Residential aged care residents and components of end of life care in an Australian hospital.

    Science.gov (United States)

    Leong, Laurence Jee Peng; Crawford, Gregory Brian

    2018-06-09

    With ageing of Australians, the numbers of residential aged care (RAC) residents is rising. This places a spotlight on decisions about appropriate care for this population, including hospitalisation and end-of-life (EOL) care. The aim was to study a sample of RAC residents who attended and died in hospital, to quantify measurable components of EOL care so as to describe the extent of palliative care required. A retrospective case-note review of hospital records was conducted in Adelaide, Australia. Participants were 109 RAC residents who attended from July 2013 to June 2014 and died in hospital. Measurements were advance care planning, health care input from the RAC facilities to hospital and components of EOL care. Residents with and without advanced dementia were compared. Advance care directives (ACDs) were present from 11 to 50%, and advance care plans (ACPs) at 60%. There were more ACPs, resuscitation orders (for/against) and do-not-hospitalise orders in residents with advanced dementia than those without. General practitioner (GP) and extended care paramedic (ECP) input on decisions for hospital transfer were 30% and 1 %. Mean hospital stay to death was 5.2 days. For residents admitted under non-palliative care teams, specialist palliative care (SPC) was needed for phone advice in 5%, consultation in 45%, transfer to palliative care unit in 37%, and takeover by SPC team in 19%. Mean number of documented goals-of-care discussions with family/caregiver was 1.7. In the last 3 days of life, the mean daily number of doses of EOL medications was 4.2. Continuous subcutaneous infusion was commenced in 35%. Staff in RAC need to be adequately resourced to make complex decisions about whether to transfer to hospital. RAC nurses are mainly making these decisions as GP and ECP input were suboptimal. Ways to support nurses and optimise decision-making are needed. Advance care planning can be improved, especially documentation of EOL wishes and hospitalisation orders. By

  10. Core Self-Evaluations, life satisfaction, and sport satisfaction

    OpenAIRE

    Antón Aluja

    2014-01-01

    We investigated the association between Core Self-Evaluations (CSE) and life and sport satisfaction to assess whether the Core Self-Evaluations scale was a better predictor of life satisfaction or sport satisfaction. The study included three hundred and thirteen athletes (231 men and 82 women; age range to 47 years (Mage=22.9 years, SDage=5.9 years)). Participants completed the French language version of the CSE scale, the Satisfaction with Life Scale, and the Satisfaction with Sport Scale. A...

  11. Development of fatigue life evaluation technique using miniature specimen

    International Nuclear Information System (INIS)

    Nogami, Shuhei; Nishimura, Arata; Fujiwara, Masaharu; Hisaka, Tomoaki

    2012-01-01

    To develop the fatigue life evaluation technique using miniature specimen, the investigation of the effect of specimen size and specimen shape on the fatigue life and the development of the fatigue testing machine, especially the extensometer, were carried out. The effect of specimen size on the fatigue life was almost negligible for the round-bar specimens. The shorter fatigue life at relatively low strain range conditions for the hourglass specimen that the standard specimen were observed. Therefore the miniature round-bar specimen was considered to be adequate for the fatigue life evaluation using small specimen. Several types of the extensometer system using a strain gauge and a laser has been developed for realizing the fatigue test of the miniature round-bar specimen at high temperature in vacuum. (author)

  12. Evaluation and Comparison of the Principal Component Analysis ...

    African Journals Online (AJOL)

    2012-08-01

    Aug 1, 2012 ... Comparison evaluation of performance indicates that, with PCA,. 80% of good GTE ... power generation Systems, Trains, Marine ... distributed around the median. Before ... GTE data is nonlinear and the distribution of the data ...

  13. Evaluating the hydrological consistency of satellite based water cycle components

    KAUST Repository

    Lopez Valencia, Oliver Miguel; Houborg, Rasmus; McCabe, Matthew

    2016-01-01

    observation. Basin-scale studies have shown considerable variability in achieving water budget closure with any degree of accuracy using satellite estimates of the water cycle. In order to assess the suitability of this type of approach for evaluating

  14. Enterprise’s employment potential: concept, components and evaluation methods

    Directory of Open Access Journals (Sweden)

    Korbut K.Ye.

    2017-06-01

    Full Text Available The present study deals with the main interpretations and views of scientists on the economic category «labor potential». The conditions and factors affecting the labor potential are given. The author makes the classification and provides the general characteristic to the factors, which characterize the mechanism of formation of the labor potential. The detailed description of the main components and the components of the labor potential at the enterprise has been determined, analyzed and provided. The levels of the labor potential manifestation are summarized, and examined, and the explanation is given to each of them. The general characteristic of the constituent elements of workers’ labor potential is provided. The principal data of the labor potential at the micro level are provided. The main types of the labor potential at the enterprise are singled out and characterized in detail by the level of aggregated estimates, by the range of coverage of opportunities, by the nature of participation in the production and economic process and by the place in the socio-economic system of the enterprise. Considerable attention is paid to the views of scientists on the main methods of assessing the labor potential of the enterprise.

  15. Evaluation on thermal aging embrittlement of cast stainless steel components in domestic PWRs

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Bong Sang; Hwa, Hong Jun; Chi, Se Hwan; Ryu, Woo Seog; Kuk, Il Hyun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-06-01

    This report reviewed the R and D states of thermal aging embrittlement of cast stainless steel components in PWRs. Cast stainless steel is being widely used in PWRs including primary piping. This material shows the reduction of fracture toughness during operating life due to high temperature. Micromechanisms and kinetics are summarized to improve the materials properties. The reduction of toughness due to thermal embrittlement in domestic reactors are predicted based on each chemical composition until the end of plant life time. Substantial degradation was predicted in some components during plant life time. (Author) 26 refs., 19 figs., 11 tabs.

  16. 3D additive manufactured 316L components microstructural features and changes induced by working life cycles

    Science.gov (United States)

    Pace, M. L.; Guarnaccio, A.; Dolce, P.; Mollica, D.; Parisi, G. P.; Lettino, A.; Medici, L.; Summa, V.; Ciancio, R.; Santagata, A.

    2017-10-01

    's number, an increase of twinning due to the growth of grains and to the release of local stresses can be hypothesized following that an important role could be played by the presence of dislocations in cell boundaries as well as oxides nano-inclusion formed in-situ during the Additive Manufacturing process (Saeidi et al., 2015) [2]. From these outcomes it is going to be presented how the 3D components produced by Additive Manufacturing could change and improve their features for potential industrial applications during life cycles and enhance such a behavior by taking carefully into account the laser parameters and its scanning speed.

  17. Evaluation of Life and Death Studies Course on Attitudes Toward Life and Death Among Nursing Students

    Directory of Open Access Journals (Sweden)

    Huei-Lih Hwang

    2005-12-01

    Full Text Available The aim of this study was to evaluate attitudes toward life and death among nursing students after attending the life and death studies (LDS program. Both qualitative and quantitative methods were used to collect data. The pretest-posttest control group design randomly assigned students to an experimental (n = 47 or control group (n = 49. The 13-week course included lectures, video appraisal, games, simulations, films, books, assignments and group sharing. Statistical and content analysis were used to analyze qualitative and quantitative data. The findings showed a significant improvement in perception of the meaningfulness of life in four categories of improvement: expanded viewpoint, sadness about death, treating life sincerely, and instilling hope in life. The qualitative data indicated that a positive change in meaning of life was associated with interaction with others and self-reflection.

  18. Evaluation of life and death studies course on attitudes toward life and death among nursing students.

    Science.gov (United States)

    Hwang, Huei-Lih; Lin, Huey-Shyan; Chen, Wen-Tin

    2005-12-01

    The aim of this study was to evaluate attitudes toward life and death among nursing students after attending the life and death studies (LDS) program. Both qualitative and quantitative methods were used to collect data. The pretest-posttest control group design randomly assigned students to an experimental (n = 47) or control group (n = 49). The 13-week course included lectures, video appraisal, games, simulations, films, books, assignments and group sharing. Statistical and content analysis were used to analyze qualitative and quantitative data. The findings showed a significant improvement in perception of the meaningfulness of life in four categories of improvement: expanded viewpoint, sadness about death, treating life sincerely, and instilling hope in life. The qualitative data indicated that a positive change in meaning of life was associated with interaction with others and self-reflection.

  19. Environmental Evaluation of New Generation Vehicles and Vehicle Components

    Energy Technology Data Exchange (ETDEWEB)

    Schexnayder, S.M.

    2002-02-06

    This report documents assessments that address waste issues and life cycle impacts associated with the vehicle materials and vehicle technologies being developed under the Partnership for a New Generation of Vehicles (PNGV) program. We refer to these vehicles as 3XVs, referring to the PNGV goal that their fuel mileage be three times better than the baseline vehicle. To meet the program's fuel consumption goals, these vehicles substitute lightweight materials for heavier materials such as steel and iron that currently dominate the composition of vehicles, and use engineering and power system changes. Alternative power systems being developed through the PNGV program include batteries for hybrid electric vehicles and fuel cells. With respect to all these developments, it is imperative to learn what effects they will have on the environment before adopting these designs and technologies on a large-scale basis.

  20. Aging/Systems Interaction Study, Component Residual Lifetime Evaluation and Feasibility of Relicensing. Progress report, FY 1985

    International Nuclear Information System (INIS)

    Close, J.A.; Jacobs, P.T.; Korth, G.E.; Mudlin, J.M.; Server, W.L.; Spaletta, H.W.

    1985-10-01

    This report documents the work performed on four research tasks in Fiscal Year 1985 (FY-1985) which were part of the Aging/Systems Interaction Study, Component Residual Lifetime Evaluation and Feasibility of Relicensing Project. The technical and management/institutional objectives for the project are described, followed by a description of the results of each task. The work on Task 1 involved identifying and prioritizing new research activities for the Nuclear Regulatory Commission (NRC) Nuclear Plant Aging Research (NPAR) Program. A proposed methodology and plan for aging-system interaction studies was developed in Task 2. The description of Task 3 work comprises a summary of nuclear plant life extension activities in the US, the technical basis associated with the residual life of metallic materials and a proposed plan for research on residual life assessment. Task 4 describes the initial evaluation of selected Standard Review Plan (NUREG-0800) sections to investigate the feasibility of relicensing. 14 refs., 13 figs., 20 tabs

  1. An evaluation of life satisfaction and health - Quality of life of senior citizens.

    Science.gov (United States)

    Ziółkowski, Artur; Błachnio, Aleksandra; Pąchalska, Maria

    2015-01-01

    Modern medicine is still searching for the antecedents which will lead to successful aging. The article discusses the self-perception of life satisfaction and health of senior citizens. The aim of the study was to determine the relationship between self-evaluation of life satisfaction and health by senior citizens in comparison to different age groups. The study included 463 persons - 230 men and 233 women. The age of the participants was in the range 16 - 83 years. All participants were asked to fill the Life Satisfaction Questionnaire (Fragebogen zur Lebenszufriedenheit - FLZ). The FLZ questionnaire assesses the global life satisfaction of a person and health domain separately. The results show age-related differences in the evaluation of life satisfaction. Accordingly, there is a significant change in health evaluations in different age groups, but there are no significant gender differences in health self-report data. The senior citizens' assessment of general health, although the lowest among all the age-subgroups, showed significant difference only in relation to the people below 45 years of age. The significant differences in satisfaction from mental health occurred only for the elderly and participants aged 25-34 and 35-44. Life satisfaction is associated with subjective health evaluations. There are two domains (mental health and performance) that are positively evaluated by more than two-thirds of senior citizens. The observed differences challenge stereotypes and prejudices relating to negative aging process. Senior citizens can improve their control beliefs and develop self-regulation and coping skills.

  2. Development on methods for evaluating structure reliability of piping components

    International Nuclear Information System (INIS)

    Schimpfke, T.; Grebner, H.; Peschke, J.; Sievers, J.

    2003-01-01

    In the frame of the German reactor safety research program of the Federal Ministry of Economics and Labour, GRS has started to develop an analysis code named PROST (PRObabilistic STructure analysis) for estimating the leak and break probabilities of piping systems in nuclear power plants. The development is based on the experience achieved with applications of the public available US code PRAISE 3.10 (Piping Reliability Analysis Including Seismic Events), which was supplemented by additional features regarding the statistical evaluation and the crack orientation. PROST is designed to be more flexible to changes and supplementations. Up to now it can be used for calculating fatigue problems. The paper mentions the main capabilities and theoretical background of the present PROST development and presents a parametric study on the influence by changing the method of stress intensity factor and limit load calculation and the statistical evaluation options on the leak probability of an exemplary pipe with postulated axial crack distribution. Furthermore the resulting leak probability of an exemplary pipe with postulated circumferential crack distribution is compared with the results of the modified PRAISE computer program. The intention of this investigation is to show trends. Therefore the resulting absolute values for probabilities should not be considered as realistic evaluations. (author)

  3. Deep Charging Evaluation of Satellite Power and Communication System Components

    Science.gov (United States)

    Schneider, T. A.; Vaughn, J. A.; Chu, B.; Wong, F.; Gardiner, G.; Wright, K. H.; Phillips, B.

    2016-01-01

    Deep charging, in contrast to surface charging, focuses on electron penetration deep into insulating materials applied over conductors. A classic example of this scenario is an insulated wire. Deep charging can pose a threat to material integrity, and to sensitive electronics, when it gives rise to an electrostatic discharge or arc. With the advent of Electric Orbit Raising, which requires spiraling through Earth's radiation belts, satellites are subjected to high energy electron environments which they normally would not encounter. Beyond Earth orbit, missions to Jupiter and Saturn face deep charging concerns due to the high energy radiation environments. While predictions can be made about charging in insulating materials, it is difficult to extend those predictions to complicated geometries, such as the case of an insulating coating around a small wire, or a non-uniform silicone grouting on a bus bar. Therefore, to conclusively determine the susceptibility of a system to arcs from deep charging, experimental investigations must be carried out. This paper will describe the evaluation carried out by NASA's Marshall Space Flight Center on subscale flight-like samples developed by Space Systems/Loral, LLC. Specifically, deep charging evaluations of solar array wire coupons, a photovoltaic cell coupon, and a coaxial microwave transmission cable, will be discussed. The results of each evaluation will be benchmarked against control sample tests, as well as typical power system levels, to show no significant deep charging threat existed for this set of samples under the conditions tested.

  4. LongerLife products increase the sustainability. Is corrosion protection ecologically useful for steel components?; LongerLife-Produkte erhoehen die Nachhaltigkeit. Ist Korrosionsschutz von Stahlbauteilen oekologisch sinnvoll?

    Energy Technology Data Exchange (ETDEWEB)

    Rogall, Armin Dietmar [Fachhochschule Dortmund (Germany). Fachbereich Architektur

    2011-07-01

    The installation of hot-dip galvanized construction units means sustainable acting. Since corrosion protection by hot-dip galvanizing can be particularly named sustainable due to its longevity, its environmental careful production, its recycling ability and life extension of steel components. Particularly the reduction of the maintenance cycles and utilization costs accompanying with a slightly higher initial investment makes the hot-dip galvanizing a sustainable system. Steel components which are treated with galvanization and colour coating, have a maintenance-free life span of more than 80 years.

  5. Development of overall evaluation system for nuclear plant life extension, (3)

    International Nuclear Information System (INIS)

    Soneda, Naoki; Takao, Takeshi

    1990-01-01

    Life and integrity assessment of structural components is essential for the nuclear plant life evaluation. Many works have been done on the life and integrity assessment methods up to date. However, there are few methods for the reliability evaluation of analysis results obtained by those methods. This report presents a reliability evaluation method of analysis results based on knowledge base and its application to the integrity assessment of PWR reactor pressure vessel against PTS event. Probabilistic fracture mechanics method is used to obtain the sensitivity of failure probability to analysis inputs. Knowledge base of fuzzy rules is constructed using the sensitivity analysis results. This method makes it possible to set reasonable safety margins to the analysis results. (author)

  6. Evaluation of metal matrix composite to replace spheroidal graphite iron for a critical component, steering knuckle

    International Nuclear Information System (INIS)

    Vijayarangan, S.; Rajamanickam, N.; Sivananth, V.

    2013-01-01

    performed on MMC model before and after optimization. The life of the MMC knuckle is evaluated for maximum load case. The results obtained from numerical analysis and experimental testing encouraged using particulate reinforced metal matrix composites for critical component steering knuckle with a weight saving about 55% when compared with currently used SG iron.

  7. The Service Life Evaluation for Concrete Structure of NPP

    International Nuclear Information System (INIS)

    Lee, Choon Min; Kim, Seong Soo; Bae, Sung Hwan; Sik, Yoon Eui

    2014-01-01

    Prolonged exposure to the marine environment degrades the durability of concrete and shortens the service life of concrete due to degradation factors such as chloride, carbonation, freezing and thawing, sulfate. Therefore, many country's organizations like the Korea Concrete Institute (KCI), the American Concrete Institute (ACI), the International Federation for Structural Concrete (FIB), the American Society for Testing and Material (ASTM) which recognized the seriousness of this deterioration proposed equation models to evaluate the service life for the concrete structures. As a result, this paper is to especially consider the service life evaluation using these equation models for concrete structure of NPP in Korea compared with 60 years as a design service life. The concrete durability evaluation for Shin-Hanul NPP units 1 and 2 is carried out by using typically proposed assessment models in domestic and foreign standard. It is confirmed that the service life of concrete durability for each of deterioration factors is significantly higher than 60 years as a design service life. As a result, the study of combined deterioration for the concrete structures of NPP in future is positively necessary and maintenance control through regular monitoring should be conducted to secure safety margin basis

  8. Evaluation and measures of the life extension of TVO I and TVO II power plant

    International Nuclear Information System (INIS)

    Hakala, J.

    1994-01-01

    A continuous and wide preventive maintenance and renovation is chosen to the life extension strategy at TVO I and II units. This requires extensive concentration on all ageing phenomena on theoretical level as well as on following their development at the power plant. The work related to ageing is partly performed by persons who are responsible for systems and components in the power plant organization, partly by the working groups, which are organized for those purposes. The evaluation of the ageing phenomenon of the power plant systems, of large components and of different technical fields has revealed several needs for measures. Partly those are already performed. However the evaluation has not revealed any such ageing phenomena, which would limit the power plant life time to originally planned 40 years. (orig.)

  9. Nuclear plant components: mechanical analysis and lifetime evaluation

    International Nuclear Information System (INIS)

    Chator, T.

    1993-09-01

    This paper concerns the methodology adopted by the Research and Development Division to handle mechanical problems found in structures and machines. Usually, these often very complex studies (3-D structures, complex loadings, non linear behavior laws) call for advanced tools and calculation means. In order to do these complex studies, R and D Division is developing a software. It handles very complex thermo-mechanical analysis using the Finite Element Method. It enables us to analyse static, dynamic, elasto-plastic problems as well as contact problems or evaluating damage and lifetime of structures. This paper will be illustrated by actual industrial case examples. The major ones will be dealing with: 1. Analysis of a new impeller/shaft assembly of a primary coolant pump. The 3D meshing is submitted simultaneously to thermal load, pressure, hydraulic, centrifugal and axial forces and clamping of studs; contacts between shaft/impeller, nuts bearing side/shaft bearing side. For this study, we have developed a new method to handle the clamping of studs. The stud elongation value is given into the software which automatically computes the distorsions between both the structures in contact and then the final position of bearing areas (using an iterative non-linear algorithm of modified Newton-Raphson type). 2. Analysis of the stress intensity factor of crack. The 3D meshing (representing the crack) is submitted simultaneously to axial and radial forces. In this case, we use the Theta method to calculate the energy restitution rate in order to determine the stress intensity factors. (authors). 7 figs., 1 tab., 3 refs

  10. Quality of life and physical components linked to sarcopenia: The SarcoPhAge study.

    Science.gov (United States)

    Beaudart, C; Reginster, J Y; Petermans, J; Gillain, S; Quabron, A; Locquet, M; Slomian, J; Buckinx, F; Bruyère, O

    2015-09-01

    The SarcoPhAge project is an ongoing longitudinal study following community-dwelling elderly subjects with the objective to assess some health and functional consequences of sarcopenia. The sarcopenia diagnosis algorithm developed by the European Working Group on Sarcopenia in Older People (EWGSOP) and used in the present study needs further validation through cross-sectional and longitudinal studies. The aim of the present study is to assess, using this algorithm, the prevalence of sarcopenia and the clinical components linked to this geriatric syndrome. Participants were community dwelling subjects aged 65years or older. To diagnose sarcopenia, we applied the definition of the EWGSOP. Muscle mass was measured by dual-energy X-ray absorptiometry, muscle strength by a hydraulic dynamometer and physical performance by the SPPB test. Large amounts of socio-demographic, anamnestic and clinical data were collected in all subjects. 534 subjects were recruited for this study (60.5% of women, mean age of 73.5±6.16years), among whom 73 subjects were diagnosed sarcopenic, which represents a global prevalence of 13.7%. Prevalence was 11.8% in men and 14.9% in women. Sarcopenic subjects were older; had a lower Body Mass Index, lower calf, waist, wrist and arm circumferences; presented more cognitive impairments (Mini-Mental State Examination), more comorbidities; were more often malnourished; and consumed more drugs. After adjustment for age, BMI, cognitive status, nutritional status, number of comorbidities and number of drugs, sarcopenic subjects had a worse physical health-related quality of life (SF-36) for the domain of physical functioning, were at higher risk of falls (Timed Up and Go test), were more frail (Fried), presented more often tiredness for the achievement of activities of daily living (Mobility-test), presented less fat mass and obviously less lean mass. Sarcopenic women were also more dependent for housekeeping and handling finances (Lawton scale) than non

  11. Development of fatigue life evaluation method using small specimen

    International Nuclear Information System (INIS)

    Nogami, Shuhei; Nishimura, Arata; Wakai, Eichi; Tanigawa, Hiroyasu; Itoh, Takamoto; Hasegawa, Akira

    2013-01-01

    For developing the fatigue life evaluation method using small specimen, the effect of specimen size and shape on the fatigue life of the reduced activation ferritic/martensitic steels (F82H-IEA, F82H-BA07 and JLF-1) was investigated by the fatigue test at room temperature in air using round-bar and hourglass specimens with various specimen sizes (test section diameter: 0.85–10 mm). The round-bar specimen showed no specimen size and no specimen shape effects on the fatigue life, whereas the hourglass specimen showed no specimen size effect and obvious specimen shape effect on it. The shorter fatigue life of the hourglass specimen observed under low strain ranges could be attributed to the shorter micro-crack initiation life induced by the stress concentration dependent on the specimen shape. On the basis of this study, the small round-bar specimen was an acceptable candidate for evaluating the fatigue life using small specimen

  12. Evaluation of composite components on the Bell 206L and Sikorsky S-76 helicopters

    Science.gov (United States)

    Baker, Donald J.

    1990-01-01

    Progress on two programs to evaluate structural composite components in flight service on Bell 206L and Sikorsky S-76 commercial helicopters is described. Forty ship sets of composite components that include the litter door, baggage door, forward fairing, and vertical fin have been installed on Bell Model 206L helicopters that are operating in widely different climates. Component installation started in 1981 and selected components were removed and tested at prescribed intervals over a ten year evaluation. Four horizontal stabilizers and eleven tail rotor spars that are production components on the S-76 helicopter were tested after prescribed periods of service to determine the effects of the operating environment on their performance. Concurrent with the flight evaluation, materials used to fabricate the components were exposed in ground racks and tested at specified intervals to determine the effects of outdoor environments. Results achieved from 123,000 hours of accumulated service on the Bell 206L components and 53,000 hours on the Sikorsky S-76 components are reported. Seventy-eight Bell 206L components were removed and tested statically. Results of seven years of ground exposure of materials used to fabricate the Bell 206L components are presented. Results of tests on four Sikorsky S-76 horizontal stabilizers and eleven tail rotor spars are also presented. Panels of material used to fabricate the Sikorsky S-76 components that were exposed for six years were tested and results are presented.

  13. An evaluation of life satisfaction and health – Quality of life of senior citizens

    Directory of Open Access Journals (Sweden)

    Artur Ziółkowski

    2015-02-01

    Full Text Available [b]Introduction and objective[/b]. Modern medicine is still searching for the antecedents which will lead to [i]successful aging[/i]. The article discusses the self-perception of life satisfaction and health of senior citizens. The aim of the study was to determine the relationship between self-evaluation of life satisfaction and health by senior citizens in comparison to different age groups. [b]Materials and method[/b]. The study included 463 persons – 230 men and 233 women. The age of the participants was in the range 16 – 83 years. All participants were asked to fill the Life Satisfaction Questionnaire ([i]Fragebogen zur Lebenszufriedenheit [/i]– FLZ. The FLZ questionnaire assesses the global life satisfaction of a person and health domain separately. [b]Results[/b]. The results show age-related differences in the evaluation of life satisfaction. Accordingly, there is a significant change in health evaluations in different age groups, but there are no significant gender differences in health self-report data. The senior citizens’ assessment of general health, although the lowest among all the age-subgroups, showed significant difference only in relation to the people below 45 years of age. The significant differences in satisfaction from mental health occurred only for the elderly and participants aged 25–34 and 35–44. [b]Conclusions[/b]. Life satisfaction is associated with subjective health evaluations. There are two domains (mental health and performance that are positively evaluated by more than two-thirds of senior citizens. The observed differences challenge stereotypes and prejudices relating to negative aging process. Senior citizens can improve their control beliefs and develop self-regulation and coping skills.

  14. Evaluation of material integrity on electricity generator water steam cycles component (Main Steam Pipe)

    International Nuclear Information System (INIS)

    Sudardjo; Histori; Triyadi, Ari

    1998-01-01

    The evaluation of material integrity on electricity generator component has been done. That component was main steam pipe of Unit II Suralaya Coal Fired Power Plant. evaluation was done by replication technique. The damage was found are two porosity's, from two point samples of six points sample population. Based on cavity evaluation in steels, which proposed by Neubauer and Wedel that porosity's still at class A damage. For class A damage, its means no remedial action would be required until next major scheduled maintenance outage. That porosity's was grouped on isolated cavities and not need ti repair that main steam pipe component less than three year after replication test

  15. Probabilistic Remaining Useful Life Prediction of Composite Aircraft Components, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — A Probabilistic Fatigue Damage Assessment Network (PFDAN) toolkit for Abaqus will be developed for probabilistic life management of a laminated composite structure...

  16. Assessing Customer Evaluation and Revenue Consequences of Component Sharing Across Brands in the Vertical Product Line

    NARCIS (Netherlands)

    P.C. Verhoef (Peter); K.H. Pauwels (Koen)

    2005-01-01

    textabstractComponent sharing may look great in the boardroom, but not in the showroom. Indeed, savings on R&D and production costs could be offset by a plunge in customer brand attractiveness and willingness to pay. This paper investigates the impact of component sharing on customer evaluation of

  17. A Component Analysis of the Impact of Evaluative and Objective Feedback on Performance

    Science.gov (United States)

    Johnson, Douglas A.

    2013-01-01

    Despite the frequency with which performance feedback interventions are used in organizational behavior management, component analyses of such feedback are rare. It has been suggested that evaluation of performance and objective details about performance are two necessary components for performance feedback. The present study was designed to help…

  18. Reliability Evaluation of Machine Center Components Based on Cascading Failure Analysis

    Science.gov (United States)

    Zhang, Ying-Zhi; Liu, Jin-Tong; Shen, Gui-Xiang; Long, Zhe; Sun, Shu-Guang

    2017-07-01

    In order to rectify the problems that the component reliability model exhibits deviation, and the evaluation result is low due to the overlook of failure propagation in traditional reliability evaluation of machine center components, a new reliability evaluation method based on cascading failure analysis and the failure influenced degree assessment is proposed. A direct graph model of cascading failure among components is established according to cascading failure mechanism analysis and graph theory. The failure influenced degrees of the system components are assessed by the adjacency matrix and its transposition, combined with the Pagerank algorithm. Based on the comprehensive failure probability function and total probability formula, the inherent failure probability function is determined to realize the reliability evaluation of the system components. Finally, the method is applied to a machine center, it shows the following: 1) The reliability evaluation values of the proposed method are at least 2.5% higher than those of the traditional method; 2) The difference between the comprehensive and inherent reliability of the system component presents a positive correlation with the failure influenced degree of the system component, which provides a theoretical basis for reliability allocation of machine center system.

  19. Development of stress corrosion techniques for structural integrity evaluation and life extension of PWR facilities

    International Nuclear Information System (INIS)

    Moreira, Pedro A.L.D.L. Pinheiro; Vilela, Jeferson J.; Lorenzo, Roberto F. Di; Lopes, Jadir A.M.

    2000-01-01

    The stress corrosion is a mechanism of degradation present in the nuclear plants. To extend the life of the plants components, this corrosion type it should be known. An evaluation for the implantation of methodologies of stress corrosion study in CDTN/CNEN, shows that the technique of slow deformation can be used in the evaluation of integrity structural nuclear power stations. This technique consists of straining a sample slowly, usually, in strain rate between 10 -4 and 10- 8 s -1 and in conditions that simulate the reactivity of the metal in environment (pressure, temperature, chemical composition of the water and etc) similar to the found at the nuclear power power stations. This simulation allows evaluating susceptibility the stress corrosion of components mechanical and structure that operate in central nuclear. (author)

  20. Associative and Strategic Components of Episodic Memory: A Life-Span Dissociation

    Science.gov (United States)

    Shing, Yee Lee; Werkle-Bergner, Markus; Li, Shu-Chen; Lindenberger, Ulman

    2008-01-01

    The authors investigated the strategic component (i.e., elaboration and organization of episodic features) and the associative component (i.e., binding processes) of episodic memory and their interactions in 4 age groups (10-12, 13-15, 20-25, and 70-75 years of age). On the basis of behavioral and neural evidence, the authors hypothesized that the…

  1. Evaluation of perception of quality of life of disabled athletes

    Directory of Open Access Journals (Sweden)

    Bartosz Bolach

    2014-02-01

    Full Text Available Purpose: To evaluate the perception of quality of life for athletes - disabled, participating in individual and team Paralympic sports. Material: The study involved 32 athletes sports club "Start" in Wroclaw in 2013, engaged in individual sports: swimming, weightlifting, powerlifting (powerlifting and command: wheelchair basketball and volleyball in a sitting position. Results: Studies have proven that sports people with physical disabilities have a positive effect on the quality of their lives. Conclusions: 1. Study aspects of perception of quality of life is a complex issue, but deserves proper attention and appropriate force to study it. 2. Athletes - Disabled involved both individual and team sports, the perception of quality of life is average.

  2. Analytical evaluation of the roller bearing service life

    Directory of Open Access Journals (Sweden)

    Antsupov Aleksey

    2017-01-01

    Full Text Available An analytical method has been developed for the design evaluation of the service life of roller bearings by the criterion of contact endurance of elements that does not require carrying out the experimental studies. It is based on the kinetic approach to the description of the solids destruction process and the theory of parametric reliability of machine parts. In contradistinction to the standard empirical dependence, which is currently used, the method allows one to take into account the effect of the material properties, and basic design and operational parameters on the service life. The results of the theoretical studies of the service life of roller bearing No. 212 (DIN 5412 T1 are presented for the quantitative assessment of this effect. They showed that the temperature-force loading conditions or material properties that were not taken into account might result in the prediction error of 1.5 or more times.

  3. Quality of life evaluation of workers for diagnostic radiology services

    International Nuclear Information System (INIS)

    Fernandes, Ivani Martins

    2011-01-01

    The main objective of this study was to evaluate the quality of life (QOL) of diagnostic radiology services workers at a hospital of Sao Paulo city. It aimed also to draw the profile of these workers identifying the variables, as its influence on their quality of life. A descriptive exploratory study with qualitative and quantitative approaches was carried out. The data were collected using the questionnaires: the abbreviated instrument for the assessment of the QOL, World Health Organization Quality of Life Instrument bref (WHOQOL-bref) and a questionnaire including the social demographic variables, work conditions and the variables that express the lifestyle of individuals, both questionnaires self-applied. The sample was formed by 118 workers, among them: physicians, technologists/technicians in radiology, nurses, technicians and assistants in nursing, and others health professionals. The data analysis included descriptive statistics, nonparametric tests and the use of a linear regression model. The reliability of the instrument for the studied sample was verified by Cronbach's Alpha Coefficient (α). The WHOQOL-bref proved to be an adequate instrument, with a good level of internal consistency (α=0.884), being easily and quickly administrated for the evaluation of the QOL. The study provided an overview of the perception of quality of life of the studied group. (author)

  4. Comparison of evaluation guidelines for life-safety seismic hazards

    International Nuclear Information System (INIS)

    Wyllie, L.A.; Love, R.J.

    1989-01-01

    The guidelines presented in Design Evaluation guidelines for Department of Energy Facilities Subjected to natural Phenomena Hazards (UCRL 15910 Draft; May 1989) include evaluation criteria for existing Department of Energy buildings subjected to earthquakes. These criteria were developed at the Lawrence Livermore National Laboratory for use in both the seismic design of new structures and the evaluation of existing structures. ATC-14: Evaluating The Seismic Resistance of Existing Buildings developed by the Applied Technology Council, consists of guidelines and criteria for identifying the buildings or building components that present unacceptable risk to human lives. This paper compares and contrasts the two evaluation guidelines for existing buildings using a prototype building as an example. The prototype building is a seven story, concrete shear wall building assuming a General Use Occupancy

  5. Evaluation of perception of quality of life of disabled athletes

    OpenAIRE

    Bartosz Bolach; Tetyana. Prystupa

    2014-01-01

    Purpose: To evaluate the perception of quality of life for athletes - disabled, participating in individual and team Paralympic sports. Material: The study involved 32 athletes sports club "Start" in Wroclaw in 2013, engaged in individual sports: swimming, weightlifting, powerlifting (powerlifting) and command: wheelchair basketball and volleyball in a sitting position. Results: Studies have proven that sports people with physical disabilities have a positive effect on the quality of their li...

  6. Combined Versus Detailed Evaluation Components in Medical Student Global Rating Indexes

    Directory of Open Access Journals (Sweden)

    Kim L. Askew

    2015-11-01

    Full Text Available Introduction: To determine if there is any correlation between any of the 10 individual components of a global rating index on an emergency medicine (EM student clerkship evaluation form. If there is correlation, to determine if a weighted average of highly correlated components loses predictive value for the final clerkship grade. Methods: This study reviewed medical student evaluations collected over two years of a required fourth-year rotation in EM. Evaluation cards, comprised of a detailed 10-part evaluation, were completed after each shift. We used a correlation matrix between evaluation category average scores, using Spearman’s rho, to determine if there was any correlation of the grades between any of the 10 items on the evaluation form. Results: A total of 233 students completed the rotation over the two-year period of the study. There were strong correlations (>0.80 between assessment components of medical knowledge, history taking, physical exam, and differential diagnosis. There were also strong correlations between assessment components of team rapport, patient rapport, and motivation. When these highly correlated were combined to produce a four-component model, linear regression demonstrated similar predictive power in terms of final clerkship grade (R2 =0.71, CI95=0.65–0.77 and R2 =0.69, CI95=0.63–0.76 for the full and reduced models respectively. Conclusion: This study revealed that several components of the evaluation card had a high degree of correlation. Combining the correlated items, a reduced model containing four items (clinical skills, interpersonal skills, procedural skills, and documentation was as predictive of the student’s clinical grade as the full 10-item evaluation. Clerkship directors should be aware of the performance of their individual global rating scales when assessing medical student performance, especially if attempting to measure greater than four components.

  7. Research on Evaluation Methodology for High Temperature Components and Technical Issues

    International Nuclear Information System (INIS)

    Kim, Y.J.; Han, S.B.

    2007-03-01

    The research on evaluation methodology for high temperature components and technical issues includes the comparison of evaluation technology of Very High Temperature Reactors(VHTRs) with that of present commercial reactors, the review of Hot Gas Duct(HGD) insulation designs, the analysis of the codes related to VHTR component construction and the analysis of technical issues on application of present codes to HGD construction. Codes to assure the integrity of the VHTR components are not fully prepared yet in any country. To understand the evaluation technology of the VHTR-related codes, key requirements of ASME B and PV Code Section III, Subsection NB and NH were compared. Six kinds of HGD designs were reviewed and compared. A reference which analyzed seven kinds of present component codes were reviewed and the limitations of them were summarized. Especially it was found that the selection of materials is limited, material property data are not enough, and design analysis methodology is not fully specified

  8. Advanced Materials Test Methods for Improved Life Prediction of Turbine Engine Components

    National Research Council Canada - National Science Library

    Stubbs, Jack

    2000-01-01

    Phase I final report developed under SBIR contract for Topic # AF00-149, "Durability of Turbine Engine Materials/Advanced Material Test Methods for Improved Use Prediction of Turbine Engine Components...

  9. Evaluation of an innovative late-life depression training program.

    Science.gov (United States)

    Smith, Marianne; Stolder, Mary Ellen; Liu, Megan Fang

    2014-01-01

    This paper describes evaluation findings associated with an innovative, CD-based, self-directed training program that was designed to improve general practice nurses' abilities to identify and care for older adults with depression. A voluntary sample of nurses completed an evaluation that focused on participants' perceptions of changes in their knowledge and skills and usefulness of the program. Quantitative items received high ratings, and narrative responses to open-ended questions were largely positive. Many opportunities exist for psychiatric nurses to facilitate, support, and extend training principles to promote late-life depression recognition and treatment. © 2013 Wiley Periodicals, Inc.

  10. Measuring, processing and evaluation of dynamic signal components of diagnostic systems and instrumentation and control systems at the Temelin NPP

    International Nuclear Information System (INIS)

    Stulik, P.; Sipek, B.

    2005-10-01

    The quality of the RVMS measuring chains was examined during an outage of the Temelin-1 reactor unit. This consisted of a defined measurement of the measuring chain output of the ionization chambers of the power zone and thermocouples by the RVMS system, processing of the time series obtained, and evaluation of the spectral parameters within the given frequency band. The results of evaluation were classified for the transfer function values along with their differences and for the phase shift values. The dynamic components of the resistance thermometers on the primary loops of the Temelin-1 and 2 reactor units were measured and the measurements were evaluated. The results in the frequency region, in the form of spectral characteristics for both the hot and cold legs, indicate that the non-invasive determination of the dynamics of the resistance thermometer measuring chains can serve as a promising basic tool for the diagnosis and life monitoring of this important in-service measurement

  11. Rating Evaluation of the Quality of Life in Russian Regions

    Directory of Open Access Journals (Sweden)

    Sergey Valentinovich Kuznetsov

    2017-03-01

    Full Text Available In the article, the authors consider the quality of life as an objective and its indicators as the criteria for evaluating the effectiveness of balanced spatial development. The problem of measuring the quality of life has a complex and integrated nature, therefore, we should develop the practice of ratings in its spatial comparisons. The article demonstrates the possibility of using the rating lists of the quality of life of Russian regions by the rating agency “RIA Rating” for 2013–2015 as an information tool for the analysis of the efficiency and effectiveness of the public development of the regional administration. The authors have concluded that with a consecutive growth of an average value of the integrated rating index of quality of life, the different ways of assessing the degree of differentiation of the regions according to the quality of life provide conflicting results. It is necessary to pay attention not so much to ranging and grading of regions as to their classification depending on to the nature of typical problems. Therefore, the rating scale is structured on the basis of the “problematic principle of regional grouping”. The authors have proposed the method of the gradation of the rating scale, allowing to take into account the direction of change of the region’s position in the ranking. The relevance of the rating as a key information tool to reduce the regional differentiation of the life quality of the population among the regulatory bodies and civil society will increase if: it is also used for other subnational entities of the Russian Federation; there is the use of econometric and computational capabilities of high-tech software systems for a posteriori analysis and models for strategic forecasting of the rankings; there is the search of a synergistic effect from a variety of estimates of the degree of spatial development.

  12. Evaluation of material integrity on electricity power steam generator cycles (turbine casing) component

    International Nuclear Information System (INIS)

    Histori; Benedicta; Farokhi; S A, Soedardjo; Triyadi, Ari; Natsir, M

    1999-01-01

    The evaluation of material integrity on power steam generator cycles component was done. The test was carried out on casing turbine which is made from Inconel 617. The tested material was taken from t anjung Priok plant . The evaluation was done by metallography analysis using microscope with magnification of 400. From the result, it is shown that the material grains are equiaxed

  13. A Bayesian least-squares support vector machine method for predicting the remaining useful life of a microwave component

    Directory of Open Access Journals (Sweden)

    Fuqiang Sun

    2017-01-01

    Full Text Available Rapid and accurate lifetime prediction of critical components in a system is important to maintaining the system’s reliable operation. To this end, many lifetime prediction methods have been developed to handle various failure-related data collected in different situations. Among these methods, machine learning and Bayesian updating are the most popular ones. In this article, a Bayesian least-squares support vector machine method that combines least-squares support vector machine with Bayesian inference is developed for predicting the remaining useful life of a microwave component. A degradation model describing the change in the component’s power gain over time is developed, and the point and interval remaining useful life estimates are obtained considering a predefined failure threshold. In our case study, the radial basis function neural network approach is also implemented for comparison purposes. The results indicate that the Bayesian least-squares support vector machine method is more precise and stable in predicting the remaining useful life of this type of components.

  14. Fatigue life estimation of welded components considering welding residual stress relaxation and its mean stress effect

    International Nuclear Information System (INIS)

    Han, Seung Ho; Han, Jeong Woo; Shin, Byung Chun; Kim, Jae Hoon

    2003-01-01

    The fatigue life of welded joints is sensitive to welding residual stress and complexity of their geometric shapes. To predict the fatigue life more reasonably, the effects of welding residual stress and its relaxation on their fatigue strengths should be considered quantitatively, which are often regarded to be equivalent to the effects of mean stresses by external loads. The hot-spot stress concept should be also adopted which can reduce the dependence of fatigue strengths for various welding details. Considering the factors mentioned above, a fatigue life prediction model using the modified Goodman's diagram was proposed. In this model, an equivalent stress was introduced which is composed of the mean stress based on the hot-spot stress concept and the relaxed welding residual stress. From the verification of the proposed model to real welding details, it is proved that this model can be applied to predict reasonably their fatigue lives

  15. Fatigue life estimation considering welding residual stress and hot-spot stress of welded components

    International Nuclear Information System (INIS)

    Han, S. H.; Lee, T. K.; Shin, B. C.

    2002-01-01

    The fatigue life of welded joints is sensitive to welding residual stress and complexity of their geometric shapes. To predict the fatigue life more reasonably, the effects of welding residual stress and its relaxation have to be considered quantitatively which are equivalent to mean stress by external loads. The hot-spot stress concept should be also adopted which can be reduce the dependence of fatigue strengths for various welding details. Considering the factors mentioned above, a fatigue life prediction model using the modified Goodman's diagram was proposed. In this model, an equivalent stress was introduced which are composed of the mean stress based on the hot-spot stress concept and the relaxed welding residual stress. From the verification of the proposed model to real welding details, it is confirmed that this model can be applied to predict reasonably their fatigue lives

  16. Improvement of Fatigue Life of Welded Structural Components of a Large Two-Stroke Diesel Engine by Grinding

    DEFF Research Database (Denmark)

    Agerskov, Henning; Hansen, Anders V.; Bjørnbak-Hansen, Jørgen

    2004-01-01

    one side only, with no access to the root side. Various investigations on the fatigue life of the structural components of this new design have been carried out. The present investigation concentrates on the improvement in fatigue life which may be obtained by grinding of the weld toes. The tests...... grinding to m=6 for the test series with grinding. In one of the test series, it was observed that in most cases crack initiation moved from the weld toe to the non-ground surface between the ground areas at the weld toes. Tests were made on steel S 275, on centrally and eccentrically loaded test specimens.......The crankshaft housings of large two-stroke diesel engines are welded structures subjected to constant amplitude loading and designed for infinite life at full design load. A new design of the so-called frame box has been introduced in the engine using butt weld joints of thick plates, welded from...

  17. NPP Evaluation, backfitting and life extension. An engineering viewpoint

    International Nuclear Information System (INIS)

    Gonzalez Lopez, A.

    1993-01-01

    During the decade of the 80s, the Owners of the two oldest operating plants in Spain designed and built during the 60s - namely, Jose Cabrera NPP, a Westinghouse PWR, and Santa Maria de Garona NPP, a GE BWR- undertook the following important programs: 1. A far-reaching Systematic Evaluation Program (SEP) for the Jose Cabrera NPP consisting in the systematic safety review of the plant design, followed by the necessary hardware modifications, to upgrade it and make it comply with current safety criteria, and a Plant Upgrading Program for the Garona Nuclear Station focusing on specific topics affecting GE BWR Mark-I type plants of the same vintage. 2. A Remaining Life Management Program to ensure that the units, after extensive backfittings and high capital investment, would complete their design life, leaving open the option for plant life extension. These two units are today considered by the Spanish nuclear industry as the pilot plants for Plant Life Extension (PLEX) programs for PWRs and BWRs in our country The purpose of this paper is to summarize the principal lessons learned from EMPRESARIOS AGRUPADOS' participation as an architect-engineering organization in the engineering, design and implementation of these Programs. They are practical examples of positive experience which could be considered as a reference when carrying out similar programs for other plants. (author)

  18. NPP Evaluation, backfitting and life extension. An engineering viewpoint

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Lopez, A [Empresarios Agrupados, A.I.E., Madrid (Spain)

    1993-12-15

    During the decade of the 80s, the Owners of the two oldest operating plants in Spain designed and built during the 60s - namely, Jose Cabrera NPP, a Westinghouse PWR, and Santa Maria de Garona NPP, a GE BWR- undertook the following important programs: 1. A far-reaching Systematic Evaluation Program (SEP) for the Jose Cabrera NPP consisting in the systematic safety review of the plant design, followed by the necessary hardware modifications, to upgrade it and make it comply with current safety criteria, and a Plant Upgrading Program for the Garona Nuclear Station focusing on specific topics affecting GE BWR Mark-I type plants of the same vintage. 2. A Remaining Life Management Program to ensure that the units, after extensive backfittings and high capital investment, would complete their design life, leaving open the option for plant life extension. These two units are today considered by the Spanish nuclear industry as the pilot plants for Plant Life Extension (PLEX) programs for PWRs and BWRs in our country The purpose of this paper is to summarize the principal lessons learned from EMPRESARIOS AGRUPADOS' participation as an architect-engineering organization in the engineering, design and implementation of these Programs. They are practical examples of positive experience which could be considered as a reference when carrying out similar programs for other plants. (author)

  19. Evaluation of life quality after arterial uterine embolization for leiomyoma

    International Nuclear Information System (INIS)

    Liu Zhaoyu; Shan Ming; Lu Zaiming; Zheng Jiahe; Zhang Jun; Sun Wei

    2007-01-01

    Objective: To evaluate the quality of life in women with uterine leiomyoma after treatment by uterine arterial embolization. Methodes: 118 patients of uterine leiomyoma were treated by uterine arterial embolization (UAE) from January 2003 to March 2005. The quality of life was measured by a fibroid specific symptom and HRQOL questionnaire pre-and post-embolization. Patients satisfaction was surveyed together with decrease of fibroids' mass measurement. Results: The decrease of fibroid size and uterine volume were 49.6% and 45.2% at 6 months after embolization with simultaneously obvious improvement of clinical symptoms. The scores of quality of life obviously improved in all follow-up subscales (P<0.001). No amenorrhea occurred during the period of observation with more than 60% of respondents acknowledging the positive improvement in fibroid-related symptoms though UAE; and 80% would probably or definitely take UAE as the first choice of treatment again. Conclusion: The treatment of symptomatic leiomyomas by UAE can improve the quality of life dramatically with a promising satisfaction. (authors)

  20. Quality of Life after Ventral Hernia Repair with Endoscopic Component Separation Technique

    DEFF Research Database (Denmark)

    Thomsen, C Ø; Brøndum, T L; Jørgensen, Lars Nannestad

    2016-01-01

    of the hernia size. Demographic data, operative information, and postoperative complications were recorded. All patients completed two similar questionnaires regarding their function level, cosmetic satisfaction, analgesic medication, alcohol consumption, and self-estimated physical and mental health before...... center operated on with endoscopic components separation. MATERIAL AND METHODS: A total of 19 consecutive patients scheduled for open hernia repair with endoscopic components separation from October 2010 to June 2012 were included. All procedures included endoscopic components separation because...... and after the hernia repair. Patients were assessed as outpatient median 2 months and 16 months after operation for exclusion of hernia recurrence and completion of the postoperative questionnaire. RESULTS AND CONCLUSIONS: Operating room time was median 204 min and correlated significantly with the hernia...

  1. A methodology to evaluate the fatigue life of flexible pipes

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, Fernando J.M. de; Sousa, Jose Renato M. de; Siqueira, Marcos Q. de; Sagrilo, Luis V.S. [Coordenacao dos Programas de Pos-graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil); Lemos, Carlos Alberto D. de [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    This paper focus on a methodology to perform the fatigue analysis of flexible pipes. This methodology employs functions that convert forces and moments obtained in global analyses into stresses. The stresses are then processed by well-known cycle counting methods, and S-N curves evaluate the damage at several points in the pipe cross-section. Palmgren-Miner linear damage hypothesis is assumed in order to calculate the accumulated fatigue damage. A parametric study on the fatigue life of a flexible pipe employing this methodology is presented. The main points addressed in the study are the influence of friction between layers in the results, the importance of evaluating the fatigue life in various points of the pipe cross-section and the effect of different mean stress levels. The obtained results suggest that the consideration of friction effects strongly influences the fatigue life of flexible risers and these effects have to be accounted both in the global and local analyses of the riser. Moreover, mean stress effects are also significant and at least 8 equally spaced wires in each analyzed section of the riser must be considered in fatigue analyses. (author)

  2. REGIONAL COMPONENTS OF GROWTH THE QUALITY OF LIFE OF THE POPULATION (FOR EXAMPLE, VORONEZH REGION

    Directory of Open Access Journals (Sweden)

    N. A. Serebryakova

    2015-01-01

    Full Text Available At the present stage of development of economy there is a transformation of main objectives of the state from ensuring growth of welfare of citizens to ensuring continuous growth of quality of life. Ensuring growth of quality of life of the population is carried out not only on state, but also on regional levels. At the state level key tasks are formed, the state assumes a considerable share of functions on achievement of the designated purpose. In the real research the attention to consideration of the program documents directed on improvement of quality of life of the population on the example of the Voronezh region is paid. The program documents of a social orientation existing in the region are for this purpose studied. It is revealed that in the region a number of the programs and subprogrammes aimed at improvement of a demographic situation, improvement of a regional budgetary and tax policy, social support of citizens in general works. As tools which use regional authorities, are noted: social standards, address social help, social contracts. It is established that introduction of system of social contracts allows to save budget funds and, at the same time, to motivate the persons which are in a difficult life situation on change of the situation to the best, joint efforts with social security authorities. It is noted that as the leading principles of rendering the social help paramount value has detailed definition of degree of need of the help and a condition of granting. The last often generate dependant moods which are important for leveling, using levers of social interaction. The analysis of the contents of the realized programs for improvement of quality of life of the population allowed to reveal advantages and defects in these programs, and also to define reserves of growth of quality of life. So, it is specified that program documents of regional level in the prevailing majority have a narrow focus on ensuring the help and

  3. AGARD/SMP Review Damage Tolerance for Engine Structures. 3. Component Behaviour and Life Management

    Science.gov (United States)

    1990-06-01

    logistic and financial planning of engine overhauls and component replacements. Conclusions This workshop covers the critical technologies that relate the...veloppements trZs importants do la part des instituits et laboratoires do recherchos 2A-2 franqais, soutenus en celii par la SNECD1A. Aujourd’hui, ces mod&1es

  4. Neutral theory for life histories and individual variability in fitness components

    DEFF Research Database (Denmark)

    Steiner, Uli; Tuljapurkar, Shripad

    2012-01-01

    in real populations. Of course, (genotypic) vital rates in real populations are expected to differ by small but evolutionarily important amounts among genotypes, but we show that such differences only modestly increase variances in fitness components. We conclude that observed differences in fitness...

  5. Using ABAQUS Scripting Interface for Materials Evaluation and Life Prediction

    Science.gov (United States)

    Powers, Lynn M.; Arnold, Steven M.; Baranski, Andrzej

    2006-01-01

    An ABAQUS script has been written to aid in the evaluation of the mechanical behavior of viscoplastic materials. The purposes of the script are to: handle complex load histories; control load/displacement with alternate stopping criteria; predict failure and life; and verify constitutive models. Material models from the ABAQUS library may be used or the UMAT routine may specify mechanical behavior. User subroutines implemented include: UMAT for the constitutive model; UEXTERNALDB for file manipulation; DISP for boundary conditions; and URDFIL for results processing. Examples presented include load, strain and displacement control tests on a single element model. The tests are creep with a life limiting strain criterion, strain control with a stress limiting cycle and a complex interrupted cyclic relaxation test. The techniques implemented in this paper enable complex load conditions to be solved efficiently with ABAQUS.

  6. Nuclear power plant life management. An overview of identification of key components in relation with degradation mechanism - IAEA guidelines presentation

    International Nuclear Information System (INIS)

    Bezdikian, Georges

    2005-01-01

    Nuclear Power Plant (NPP) lifetime has a direct bearing on the cost of the electricity generated from it. The annual unit cost of electricity is dependent upon the operational time, and also annual costs and the capital cost assumptions function of Euros/kw. If the actual NPP lifetime has been underestimated then an economic penalty could be incurred. But the ageing degradation, of nuclear power plants is an important aspect that requires to be addressed to ensure: - that necessary safety margins are maintained throughout service life; - the adequate reliability and therefore the economic viability of older plants is maintained; - that unforeseen an uncontrolled degradation of critical plant components does not foreshorten the plant lifetime. Accommodating the inevitable obsolescence of some components has also to be addressed during plant life. Plant lifetime management requires the identification and life assessment of those components which not only limit the lifetime of the plant but also those which cannot be reasonably replaced. The planned replacement of major or 'key' components needs to be considered - where economic considerations will largely dictate replacement or the alternative strategy of power plant decommissioning. The necessary but timely planning for maintenance and replacements is a necessary consideration so that functions and reliability are maintained. The reasons for the current increasing attention in the area of plant life management are diverse and range from the fact that many of the older plants are approaching for the oldest plants more than 30 years in operation, and for important number of NPPs between 20 and 30 years. The impact of plant life management on the economics of generating electricity is the subject of ongoing studies and it can readily be seen that there can be both savings and additional costs associated with these activities. Not all degradation processes will be of significance in eroding safety margins and there is a

  7. Evaluation of flow-induced vibration prediction techniques for in-reactor components

    International Nuclear Information System (INIS)

    Mulcahy, T.M.; Turula, P.

    1975-05-01

    Selected in-reactor components of a hydraulic and structural dynamic scale model of the U. S. Energy Research and Development Administration experimental Fast Test Reactor have been studied in an effort to develop and evaluate techniques for predicting vibration behavior of elastic structures exposed to a moving fluid. Existing analysis methods are used to compute the natural frequencies and modal shapes of submerged beam and shell type components. Component response is calculated, assuming as fluid forcing mechanisms both vortex shedding and random excitations characterized by the available hydraulic data. The free and force vibration response predictions are compared with extensive model flow and shaker test data. (U.S.)

  8. Perception of Quality of Life and its Components among Russian Students – Implications for Academic Teaching

    OpenAIRE

    Gawlik, Remigiusz; Titarenko, Roman; Titov, Sergei

    2015-01-01

    The paper has 3 objectives: (i) identify QoL determinants of Russian Students; (ii) assess their relevance for decision-making when choosing life strategies; (iii) recognize their implications for academic teaching. The research sample were students from two Russian Universities. The study employed: literature analysis; exploratory research (direct individual in-depth interviews, survey based on a self-administered, web-based questionnaire with single-answer, limited choice qualitative & quan...

  9. CLOTHING AS COMPONENT OF RED ARMY EVERYDAY LIFE IN 1941-1945

    Directory of Open Access Journals (Sweden)

    Алексей Эдиславович Ларионов

    2014-12-01

    Full Text Available This article is devoted to the creature comforts of a field army during the Great Patriotic War. Clothing is characterized and analyzed from the perspective of everyday life forces. Observed dynamic changes uniforms, unlike the formal statutory requirements and frontline realities concluded the dialectical character of the material faces everyday life forces that combined formal- organized and spontaneous moments. The article as a description of the material combines facets of everyday front of the Red Army and its analysis based on the use of sources of personal origin and archival documents, including previously unpublished. During the analysis, the amount of historical facts, the author comes to the conclusion that the relationship that face the front of her everyday life with other parties, as well as macro-historical processes in the Great Patriotic War. While wearing military uniforms realities often reflected not so much the statutory requirements as the need to adapt to society representatives militarnogo harsh conditions of total war. Simultaneously change the appearance of the Red Army soldiers on the basis of the directives of the military and political leadership of the Soviet Union reflected the dynamics of ideological and political power fluctuations official rate.

  10. Evaluation of Embedded System Component Utilized in Delivery Integrated Design Project Course

    Science.gov (United States)

    Junid, Syed Abdul Mutalib Al; Hussaini, Yusnira; Nazmie Osman, Fairul; Razak, Abdul Hadi Abdul; Idros, Mohd Faizul Md; Karimi Halim, Abdul

    2018-03-01

    This paper reports the evaluation of the embedded system component utilized in delivering the integrated electronic engineering design project course. The evaluation is conducted based on the report project submitted as to fulfil the assessment criteria for the integrated electronic engineering design project course named; engineering system design. Six projects were assessed in this evaluation. The evaluation covers the type of controller, programming language and the number of embedded component utilization as well. From the evaluation, the C-programming based language is the best solution preferred by the students which provide them flexibility in the programming. Moreover, the Analog to Digital converter is intensively used in the projects which include sensors in their proposed design. As a conclusion, in delivering the integrated design project course, the knowledge over the embedded system solution is very important since the high density of the knowledge acquired in accomplishing the project assigned.

  11. Life time evaluation of spectrum loaded machine parts

    Energy Technology Data Exchange (ETDEWEB)

    Rabb, R. [Waertsilae NSD Corporation, Vaasa (Finland)

    1998-12-31

    In a medium speed diesel engine there are some important components, such as the cylinder head, the piston and the cylinder liner, which are subjected to a specific load spectrum consisting of mainly two distinct parts. One is the low cycle part which is due to the temperature field that builds up after that the engine has been started. This low cycle part causes a big stress amplitude but consists of only a couple of thousand cycles during the engine life time. The other part of the load spectrum is the high cycle part due to the firing pressure. The high cycle part has a smaller amplitude but consists of billions of cycles during the engine life time. The cylinder head and the cylinder liner are made of cast iron. In this investigation the true extension into the high cycle domain of the S-N curve for grey cast iron grade 300/ISO 185 was established through fatigue tests with a load spectrum resembling the existing one. This testing resulted in much new and improved knowledge about the fatigue properties of grey cast iron and it was even possible to generalize the outcome of the spectrum fatigue tests into a simple design curve. (orig.) 11 refs.

  12. Principal component analysis of the Norwegian version of the quality of life in late-stage dementia scale.

    Science.gov (United States)

    Mjørud, Marit; Kirkevold, Marit; Røsvik, Janne; Engedal, Knut

    2014-01-01

    To investigate which factors the Quality of Life in Late-Stage Dementia (QUALID) scale holds when used among people with dementia (pwd) in nursing homes and to find out how the symptom load varies across the different severity levels of dementia. We included 661 pwd [mean age ± SD, 85.3 ± 8.6 years; 71.4% women]. The QUALID and the Clinical Dementia Rating (CDR) scale were applied. A principal component analysis (PCA) with varimax rotation and Kaiser normalization was applied to test the factor structure. Nonparametric analyses were applied to examine differences of symptom load across the three CDR groups. The mean QUALID score was 21.5 (±7.1), and the CDR scores of the three groups were 1 in 22.5%, 2 in 33.6% and 3 in 43.9%. The results of the statistical measures employed were the following: Crohnbach's α of QUALID, 0.74; Bartlett's test of sphericity, p Kaiser-Meyer-Olkin measure, 0.77. The PCA analysis resulted in three components accounting for 53% of the variance. The first component was 'tension' ('facial expression of discomfort', 'appears physically uncomfortable', 'verbalization suggests discomfort', 'being irritable and aggressive', 'appears calm', Crohnbach's α = 0.69), the second was 'well-being' ('smiles', 'enjoys eating', 'enjoys touching/being touched', 'enjoys social interaction', Crohnbach's α = 0.62) and the third was 'sadness' ('appears sad', 'cries', 'facial expression of discomfort', Crohnbach's α 0.65). The mean score on the components 'tension' and 'well-being' increased significantly with increasing severity levels of dementia. Three components of quality of life (qol) were identified. Qol decreased with increasing severity of dementia. © 2013 S. Karger AG, Basel.

  13. Improvement of system code importing evaluation of Life Cycle Analysis of tokamak fusion power reactors

    International Nuclear Information System (INIS)

    Kobori, Hikaru; Kasada, Ryuta; Hiwatari, Ryoji; Konishi, Satoshi

    2016-01-01

    Highlights: • We incorporated the Life Cycle Analysis (LCA) of tokamak type DEMO reactor and following commercial reactors as an extension of a system code. • We calculated CO_2 emissions from reactor construction, operation and decommissioning that is considered as a major environmental cost. • We found that the objective of conceptual design of the tokamak fusion power reactor is moved by changing evaluation index. • The tokamak fusion reactor can reduce CO_2 emissions in the life cycle effectively by reduction of the amount involved in the replacement of internal components. • The tokamak fusion reactor achieves under 0.174$/kWh electricity cost, the tokamak fusion reactor is contestable with 1500 degrees-class LNG-fired combined cycle power plant. - Abstract: This study incorporate the Life Cycle Analysis (LCA) of tokamak type DEMO reactor and following commercial reactors as an extension of a system code to calculate CO_2 emissions from reactor construction, operation and decommissioning that is considered as a major environmental cost. Competitiveness of tokamak fusion power reactors is expected to be evaluated by the cost and environmental impact represented by the CO_2 emissions, compared with present and future power generating systems such as fossil, nuclear and renewables. Result indicated that (1) The objective of conceptual design of the tokamak fusion power reactor is moved by changing evaluation index. (2) The tokamak fusion reactor can reduce CO_2 emissions in the life cycle effectively by reduction of the amount involved in the replacement of internal components. (3) The tokamak fusion reactor achieves under 0.174$/kWh electricity cost, the tokamak fusion reactor is contestable with 1500 degrees-class LNG-fired combined cycle power plant.

  14. Improvement of system code importing evaluation of Life Cycle Analysis of tokamak fusion power reactors

    Energy Technology Data Exchange (ETDEWEB)

    Kobori, Hikaru [Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan); Kasada, Ryuta, E-mail: r-kasada@iae.kyoto-u.ac.jp [Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan); Hiwatari, Ryoji [Central Research Institute of Electric Power Industry, Tokyo (Japan); Konishi, Satoshi [Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan)

    2016-11-01

    Highlights: • We incorporated the Life Cycle Analysis (LCA) of tokamak type DEMO reactor and following commercial reactors as an extension of a system code. • We calculated CO{sub 2} emissions from reactor construction, operation and decommissioning that is considered as a major environmental cost. • We found that the objective of conceptual design of the tokamak fusion power reactor is moved by changing evaluation index. • The tokamak fusion reactor can reduce CO{sub 2} emissions in the life cycle effectively by reduction of the amount involved in the replacement of internal components. • The tokamak fusion reactor achieves under 0.174$/kWh electricity cost, the tokamak fusion reactor is contestable with 1500 degrees-class LNG-fired combined cycle power plant. - Abstract: This study incorporate the Life Cycle Analysis (LCA) of tokamak type DEMO reactor and following commercial reactors as an extension of a system code to calculate CO{sub 2} emissions from reactor construction, operation and decommissioning that is considered as a major environmental cost. Competitiveness of tokamak fusion power reactors is expected to be evaluated by the cost and environmental impact represented by the CO{sub 2} emissions, compared with present and future power generating systems such as fossil, nuclear and renewables. Result indicated that (1) The objective of conceptual design of the tokamak fusion power reactor is moved by changing evaluation index. (2) The tokamak fusion reactor can reduce CO{sub 2} emissions in the life cycle effectively by reduction of the amount involved in the replacement of internal components. (3) The tokamak fusion reactor achieves under 0.174$/kWh electricity cost, the tokamak fusion reactor is contestable with 1500 degrees-class LNG-fired combined cycle power plant.

  15. Evaluation on the life of world's natural gas supplies

    International Nuclear Information System (INIS)

    EL-Gassier, M.M.

    1993-01-01

    Utilization of natural gas as a primary source of energy has been increasing steadily. It constituted about 22.7% of the primary energy consumed by the world in 1991. In this paper the life of world natural gas reserves is evaluated in relationship to the rate of their consumption. An algorithm is used to calculate the rate of consumption and the life of these reserves as a function of annual growth rate of gas consumption. If the future rate of consumption is kept constant at the level of 1991, i.e., zero annual growth rate, the gas reserves will last for about 62 years. The same reserves will last for only 34 and 28 years for annual growth rates of 3.33% and 5.0%, respectively. Increase in the amount of reserves will only increase its life slightly at high annual growth rates. On the other hand, natural gas reserves can last indefinitely if world annual growth rate is -1.63% or lower. (author)

  16. Development of web-based integrity evaluation system for primary components in a nuclear power plant

    International Nuclear Information System (INIS)

    Lee, S.M.; Kim, J.C.; Choi, J.B.; Kim, Y.J.; Choi, S.N.; Jang, K.S.; Hong, S.Y.

    2004-01-01

    A nuclear power plant is composed of a number of primary components. Maintaining the integrity of these components is one of the most critical issues in nuclear industry. In order to maintain the integrity of these primary components, a complicated procedure is required including periodical in-service inspection, failure assessment, fracture mechanics analysis, etc. Also, experts in different fields have to co-operate to resolve the integrity issues on the basis of inspection results. This integrity evaluation process usually takes long, and thus, is detrimental for the plant productivity. Therefore, an effective safety evaluation system is essential to manage integrity issues on a nuclear power plant. In this paper, a web-based integrity evaluation system for primary components in a nuclear power plant is proposed. The proposed system, which is named as WEBIES (web-based integrity evaluation system), has been developed in the form of 3-tier system architecture. The system consists of three servers; application program server, user interface program server and data warehouse server. The application program server includes the defect acceptance analysis module and the fracture mechanics analysis module which are programmed on the basis of ASME sec. XI, appendix A. The data warehouse server provides data for the integrity evaluation including material properties, geometry information, inspection data and stress data. The user interface program server provides information to all co- workers in the field of integrity evaluation. The developed system provides engineering knowledge-based information and concurrent and collaborative working environment through internet, and thus, is expected to raise the efficiency of integrity evaluation procedures on primary components of a nuclear power plant. (orig.)

  17. Development of web-based integrity evaluation system for primary components in a nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.M.; Kim, J.C.; Choi, J.B.; Kim, Y.J. [SAFE Research Center, Sungkyunkwan Univ., Suwon (Korea); Choi, S.N.; Jang, K.S.; Hong, S.Y. [Korea Electronic Power Research Inst., Daejeon (Korea)

    2004-07-01

    A nuclear power plant is composed of a number of primary components. Maintaining the integrity of these components is one of the most critical issues in nuclear industry. In order to maintain the integrity of these primary components, a complicated procedure is required including periodical in-service inspection, failure assessment, fracture mechanics analysis, etc. Also, experts in different fields have to co-operate to resolve the integrity issues on the basis of inspection results. This integrity evaluation process usually takes long, and thus, is detrimental for the plant productivity. Therefore, an effective safety evaluation system is essential to manage integrity issues on a nuclear power plant. In this paper, a web-based integrity evaluation system for primary components in a nuclear power plant is proposed. The proposed system, which is named as WEBIES (web-based integrity evaluation system), has been developed in the form of 3-tier system architecture. The system consists of three servers; application program server, user interface program server and data warehouse server. The application program server includes the defect acceptance analysis module and the fracture mechanics analysis module which are programmed on the basis of ASME sec. XI, appendix A. The data warehouse server provides data for the integrity evaluation including material properties, geometry information, inspection data and stress data. The user interface program server provides information to all co- workers in the field of integrity evaluation. The developed system provides engineering knowledge-based information and concurrent and collaborative working environment through internet, and thus, is expected to raise the efficiency of integrity evaluation procedures on primary components of a nuclear power plant. (orig.)

  18. [Characteristics of the proteins of unicellular organisms as potential components of ecological life-support systems].

    Science.gov (United States)

    Barashkov, V A; Trubachev, I N; Gitel'zon, I I

    1979-01-01

    A comparative characterization of the biological value of proteins from green and blue-green algae, bacteria, and microbial coenosis of straw mineralizing active sludge is given with respect to the fractional composition of total protein, its amino acid composition, and affinity for proteolytic enzymes in vitro. The above microorganisms have an adequate amino acid composition, a high content of essential amino acids, and differ in their content of readily soluble proteins. The presence of protein complexes with other cellular components, for instance lipids and carbohydrates, seems to be responsible for a poor digestibility of these proteins.

  19. Design and fabrication of stainless steel components for long life of spent fuel reprocessing plants

    International Nuclear Information System (INIS)

    Natarajan, R.; Ramkumar, P.; Sundararaman, V.; Kamachi Mudali, U.; Baldev Raj; Shanmugam, K.

    2010-01-01

    Reprocessing of spent nuclear fuels based on the PUREX process is the proven process with many commercial plants operating satisfactorily worldwide. The process medium being nitric acid, austenitic stainless steel is the material of construction as it is the best commercially available material for meeting the conditions in the reprocessing plants. Because of the high radiation fields, contact maintenance of equipment and systems of these plants are very time consuming and costly unlike other chemical process plants. Though the plants constructed in the early years required extensive shut downs for replacement of equipment and systems within the first fifteen years of operation itself, development in the field of stainless steel metallurgy and fabrication techniques have made it possible to design the present day plants for an operating life period of forty years. A review of the operational experience of the PUREX process based aqueous reprocessing plants has been made in this paper and reveals that life limiting failures of equipment and systems are mainly due to corrosion while a few are due to stresses. Presently there are no standards for design specification of materials and fabrication of reprocessing plants like the nuclear power plants, where well laid down ASTM and ASME codes and standards are available which are based on the large scale operational feedbacks on pressure vessels for conventional and nuclear industries. (author)

  20. Service life evaluation of non-metallic containment seals

    International Nuclear Information System (INIS)

    Pringle, T.G.

    1994-01-01

    A Service Life Evaluation Program (SLEP) was successfully completed for expansion joint seals used in the pressure relief duct of Pickering NGS, an eight unit CANDU station. These seals are part of the containment boundary, are difficult to replace and then only during station outages which are scheduled at ten year intervals. The SLEP, consisting of an accelerated aging program and a qualification test, was undertaken to determine the service life of the seals such that they would be capable of remaining functional following a combination of service life, a design basis accident and a subsequent seismic event. The Arrhenius model of aging was used for the accelerated aging program. Samples of seal material were subjected to oven aging at five temperatures, 150, 160, 170, 180 and 190 deg C. Tensile properties and hardness were measured at various aging times and Arrhenius plots constructed. Based on changes in elongation, activation energies of 1.2 eV and 1.1 eV were calculated for the reinforcing fabric and the silicone cover rubber, respectively. Hardness measurements were also taken but as expected, no precise quantitative aging relationship could be determined from material hardness. For the qualification test a representative length of seal was installed and field-spliced in a test frame built to simulate the installed configuration of the seal. It then underwent accelerated aging equivalent to the service life, followed by LOCA irradiation exposure to LOCA conditions of humidity, temperature and pressure and a design-basis seismic event. Finally, a pressure test to approximately five times design pressure was successfully performed to demonstrate the remaining margin of safety. Periodic air leakage tests indicated no deterioration in sealing performance and no physical deterioration was apparent. (author). 11 refs., 2 tabs., 8 figs

  1. Analyses of component degradation to evaluate maintenance effectiveness and aging effects

    International Nuclear Information System (INIS)

    Samanta, P.K.; Hsu, F.; Subudhi, M.; Vesely, W.E.

    1991-01-01

    This paper describes degradation modeling, an approach for analyzing degradation and failure of components to understand the aging process of components. As used in our study, degradation modeling is the analysis of information on degradation of components for developing models of the degradation process and its implications. This modeling focuses on the analysis of the times of degradations of components, to model how the rate of degradation changes with the age of the component. With this methodology we also determine the effectiveness of maintenance as applicable to aging evaluations. The specific applications which are performed show quantitative models of degradation rates of components and failure rates of components from plant-specific data. The statistical techniques allow aging trends to be identified in the degradation data and in the failure data. Initial estimates of the effectiveness of maintenance in limiting degradations from becoming failures are developed. These results are important first steps in degradation modeling, and show that degradation can be modeled to identify aging trends. 2 refs., 8 figs., 1 tab

  2. A kernel principal component analysis–based degradation model and remaining useful life estimation for the turbofan engine

    Directory of Open Access Journals (Sweden)

    Delong Feng

    2016-05-01

    Full Text Available Remaining useful life estimation of the prognostics and health management technique is a complicated and difficult research question for maintenance. In this article, we consider the problem of prognostics modeling and estimation of the turbofan engine under complicated circumstances and propose a kernel principal component analysis–based degradation model and remaining useful life estimation method for such aircraft engine. We first analyze the output data created by the turbofan engine thermodynamic simulation that is based on the kernel principal component analysis method and then distinguish the qualitative and quantitative relationships between the key factors. Next, we build a degradation model for the engine fault based on the following assumptions: the engine has only had constant failure (i.e. no sudden failure is included, and the engine has a Wiener process, which is a covariate stand for the engine system drift. To predict the remaining useful life of the turbofan engine, we built a health index based on the degradation model and used the method of maximum likelihood and the data from the thermodynamic simulation model to estimate the parameters of this degradation model. Through the data analysis, we obtained a trend model of the regression curve line that fits with the actual statistical data. Based on the predicted health index model and the data trend model, we estimate the remaining useful life of the aircraft engine as the index reaches zero. At last, a case study involving engine simulation data demonstrates the precision and performance advantages of this prediction method that we propose. At last, a case study involving engine simulation data demonstrates the precision and performance advantages of this proposed method, the precision of the method can reach to 98.9% and the average precision is 95.8%.

  3. Evaluation on Glare from Vehicle Lamps and Effectiveness of Road Components as Glare Barriers

    NARCIS (Netherlands)

    Mangkuto, R.A.; Paripurna, A.; Soelami, F.X.N.

    2009-01-01

    Vehicle lamps are vital components which are required to ensure the driver’s safety, particularly at nighttime. However, vehicle lamps may cause glare which can reduce visibility and create discomfort. The objectives of this research are to evaluate glare from car headlamp and motorcycle lamps; and

  4. Metallurgical evaluation of laser additive manufactured Ti6Al4V components

    CSIR Research Space (South Africa)

    Mutombo, K

    2013-10-01

    Full Text Available of contact between single deposited layer and Ti6Al4V base as well as the tensile properties of the component were evaluated. Powdered metal globularization, size segregation, un-melted or semi-melted particles and chemical surface contamination were revealed...

  5. Evaluating the speech output component of a smart-home system

    NARCIS (Netherlands)

    Möller, S.; Krebber, J.; Smeele, P.

    2006-01-01

    This paper describes four experiments which have been carried out to evaluate the speech output component of the INSPIRE spoken dialogue system, providing speech control for di.erent devices located in a ‘‘smart’’ home environment. The aim is to quantify the impact of different factors on the

  6. The Use of Workforce Assessment as a Component of Career and Technical Education Program Evaluation

    Science.gov (United States)

    Bartlett, Kenneth R.; Schleif, Nicole L.; Bowen, Mauvalyn M.

    2011-01-01

    This research project examined the extent to which Career and Technical Education (CTE)-related programs use workforce needs assessment as a component of their evaluation activities. An employer perspective was used to develop a conceptual framework drawing on strategic human resource management theory. The extent and methods utilized for…

  7. Investigation of the effects of a seismic event on accelerated aged components and benefits in equipment life extension

    International Nuclear Information System (INIS)

    Rygg, D.E.; Epstein, J.L.

    1985-01-01

    Westinghouse has performed extensive testing to determine the effects of aging on a wide range of components. Additionally, Westinghouse has an extensive data base of nuclear plant equipment and components. This paper presents how the data base of information on plant parts can be analyzed, modified, and managed or tracked to reflect in-plant parts life extension based on actual tests on aging. Such an approach can benefit utility programs for parts inventory, plant operations and plant availability, and can also reduce the costs of parts reordering. Rather than weigh the merits of the positions in this debate, this paper presents the results of a component aging program which simulates from five to twenty years of operation followed by a seismic event and identifies the possible incorporation of this data into a plant data base which offers quick reference and provides other relevant information on the component and equipment. The use of this data as part of a well structured maintenance and surveillance program offers an avenue to resolve this debate in a cost effective manner

  8. Environmental zoning for service life prediction of building components in Malaysia

    International Nuclear Information System (INIS)

    Fathoni U; Rohayu C O; Zakaria C M

    2013-01-01

    Interactions between building materials and environment are very complex. More often than not, deterioration of building component is due to environmental loads with the result of reducing its durability. The environmental loads are less overlooked or underestimated in early design phase. Objective of this study is to distinguish the difference of environmental load for different area in Malaysia. The environmental data consist of climate and pollution data which extracted from the Malaysia Meteorology Department's data bank. From this study, six different environmental zones in Malaysia are distinguished. There are different characteristic of environmental parameters found where some of them dominant to others. This information can assist the engineer to justify the use of different technology, material or construction method in construction industry.

  9. Creep-fatigue life property of FBR high-temperature structural materials under tension-torsion loading and life evaluation method

    International Nuclear Information System (INIS)

    Ogata, Takashi; Nitta, Akito

    1994-01-01

    Creep-fatigue damage in high temperature structural components in a FBR progress under multiaxial stress condition depending on their operating conditions and configuration. Therefore, multiaxial stress effects on creep-fatigue damage evolution must be clarified to make precise creep-fatigue damage evaluation of these components. In this study, creep-fatigue tests in FBR high temperature materials such as SUS304, 316FR stainless steels and a modified 9Cr steel were conducted under biaxial stress subjecting tension-compression and torsion loading, in order to examine biaxial stress effects on failure mechanism and life property, and to discuss creep-fatigue life evaluation methods under biaxial stress. Main results obtained in this study are summarized as follows: 1. The main cracks under cyclic torsion loading propagated by shear mode in three materials. But intergranular failure was occurred in SUS304 and 316FR, and transgranular failure was observed in Mod.9Cr steel. 2. Nonlinear damage accumulation model proposed based on uniaxial creep-fatigue test results was extended to apply for creep-fatigue damage evaluation under biaxial stress state by considering the biaxial stress effects on fatigue and creep damage evolution. 3. It was confirmed that creep-fatigue life under biaxial stress could be predicted by the extended evaluation method with higher accuracy than existing methods. (author)

  10. Pilot evaluation of an adolescent risk and injury prevention programme incorporating curriculum and school connectedness components.

    Science.gov (United States)

    Chapman, R L; Buckley, L; Sheehan, M; Shochet, I M

    2013-08-01

    School connectedness is an important protective factor for adolescent risk-taking behaviour. This study examined a pilot version of the Skills for Preventing Injury in Youth (SPIY) programme, combining teacher professional development (PD) for increasing school connectedness (connectedness component) with a risk and injury prevention curriculum for early adolescents (curriculum component). A process evaluation was conducted on the connectedness component, involving assessments of programme reach, participant receptiveness and initial use, and a preliminary impact evaluation was conducted on the combined connectedness and curriculum programme. The connectedness component was well received by teacher participants, who saw benefits for both themselves and their students. Classroom observation also showed that teachers who received PD made use of the programme strategies. Grade 8 students who participated in the SPIY programme were less likely to report violent behaviour at 6-month follow-up than were control students, and trends also suggested reduced transport injuries. The results of this research support the use of the combined SPIY connectedness and curriculum components in a large-scale effectiveness trial to assess the impact of the programme on students' connectedness, risk-taking and associated injuries.

  11. Test and evaluation of semiconductor components in mixed field radiation monitoring

    International Nuclear Information System (INIS)

    Cardenas, Jose Patricio N.; Madi Filho, Tufic; Rodrigues, Leticia L.C.

    2009-01-01

    Silicon components have found extensive use in nuclear spectroscopy and counting, as described in many articles in the last three decades. These devices have found utility in radiation dosimetry because a diode, for instance, produces a current approximately 18000 times higher than any ionization chamber of equal sensitive volume. This reduces stringent requirements from the electronics used to amplify or integrate the current and / or allows approaching the ideal detector point for the mapping of radiation fields. For better performance, in the case of diodes, they are normally used with high inverse polarity to obtain a deeper barrier, less noise and shorter transit time. The aim of this work was the evaluation of these semiconductor components for application in ionizing radiation fields monitoring, in nuclear research reactors and radiotherapy facilities, for radiation protection and health physics purposes. Experimental configurations to analyze the performance of commercial semiconductors, such as silicon PIN Photodiodes and Silicon Surface Barrier Detectors, were developed and the performance of three different configurations of charge preamplifier with silicon components was also studied. Components were evaluated for application as neutron detectors, using some types of radiators (converters). The radiation response of these silicon components to neutron fields from nuclear research reactors IEA-R1 and IPEN-MB1 (thermal, epithermal and fast neutrons), from beam holes, experimental halls and AmBe neutron sources in laboratory was investigated. (author)

  12. Flight service evaluation of composite components on Bell 206L and Sikorsky S-76 helicopters

    Science.gov (United States)

    Baker, D. J.

    1983-01-01

    Progress on two programs to evaluate composite structural components in flight service on commercial helicopters is described. Thirty-six ship sets of composite components that include the litter door, baggage door, forward fairing, and vertical fin were installed on Bell Model 206L helicopters that are operating in widely different climatic areas. Four horizontal stabilizers and ten tail rotor spars that are production components on the S-76 helicopter were tested after prescribed periods of service to determine the effects of the operating environment on their performance. Concurrent with the flight evaluation, specimens from materials used to fabricate the components were exposed in ground racks and tested at specified intervals to determine the effects of outdoor environments. Results achieved from 14,000 hours of accumulated service on the 206L components, tests on a S-76 horizontal stabilizer after 1600 hours of service, tests on a S-76 tail rotor spar after 2300 hours service, and two years of ground based exposure of material coupons are reported.

  13. Flaw evaluation methodology for class 2, 3 components in light water reactors

    International Nuclear Information System (INIS)

    Miura, Naoki; Kashima, Koichi; Miyazaki, Katsumasa; Hasegawa, Kunio; Oritani, Naohiko

    2006-01-01

    It is quite important to validate the structural integrity of operating plant components as aged LWR plants are gradually increasing in Japan. The rules on fitness-for-service for nuclear power plants constituted by the JSME provides flaw evaluation methodology. They are mainly focused on Class 1 components, while flaw evaluation criteria for Class 2, 3 components are not consolidated. As such, they also required from the viewpoints of in-service inspection request, reduction of operating cost and systematization of consistent code/standard. In this study, basic concept of flaw evaluation for Class 2, 3 piping was considered, and it is concluded that the same evaluation procedure as Class 1 piping in the current rules is applicable. Some technical issues on practical flaw evaluation for Class 2, 3 piping were listed up, and a countermeasure for each issue was devised. Especially, both allowable flaw sizes in acceptance standards and critical flaw sizes in acceptance criteria have to be determined in consideration of degraded fracture toughness. (author)

  14. Principal components analysis of an evaluation of the hemiplegic subject based on the Bobath approach.

    Science.gov (United States)

    Corriveau, H; Arsenault, A B; Dutil, E; Lepage, Y

    1992-01-01

    An evaluation based on the Bobath approach to treatment has previously been developed and partially validated. The purpose of the present study was to verify the content validity of this evaluation with the use of a statistical approach known as principal components analysis. Thirty-eight hemiplegic subjects participated in the study. Analysis of the scores on each of six parameters (sensorium, active movements, muscle tone, reflex activity, postural reactions, and pain) was evaluated on three occasions across a 2-month period. Each time this produced three factors that contained 70% of the variation in the data set. The first component mainly reflected variations in mobility, the second mainly variations in muscle tone, and the third mainly variations in sensorium and pain. The results of such exploratory analysis highlight the fact that some of the parameters are not only important but also interrelated. These results seem to partially support the conceptual framework substantiating the Bobath approach to treatment.

  15. Examples of fatigue lifetime and reliability evaluation of larger wind turbine components

    DEFF Research Database (Denmark)

    Tarp-Johansen, N.J.

    2003-01-01

    This report is one out of several that constitute the final report on the ELSAM funded PSO project “Vindmøllekomponenters udmattelsesstyrke og levetid”, project no. 2079, which regards the lifetime distribution of larger wind turbine components in ageneric turbine that has real life dimensions....... Though it was the initial intention of the project to consider only the distribution of lifetimes the work reported in this document provides also calculations of reliabilities and partial load safetyfactors under specific assumptions about uncertainty sources, as reliabilities are considered...

  16. Microalgal biomass production pathways: evaluation of life cycle environmental impacts.

    Science.gov (United States)

    Zaimes, George G; Khanna, Vikas

    2013-06-20

    Microalgae are touted as an attractive alternative to traditional forms of biomass for biofuel production, due to high productivity, ability to be cultivated on marginal lands, and potential to utilize carbon dioxide (CO2) from industrial flue gas. This work examines the fossil energy return on investment (EROIfossil), greenhouse gas (GHG) emissions, and direct Water Demands (WD) of producing dried algal biomass through the cultivation of microalgae in Open Raceway Ponds (ORP) for 21 geographic locations in the contiguous United States (U.S.). For each location, comprehensive life cycle assessment (LCA) is performed for multiple microalgal biomass production pathways, consisting of a combination of cultivation and harvesting options. Results indicate that the EROIfossil for microalgae biomass vary from 0.38 to 1.08 with life cycle GHG emissions of -46.2 to 48.9 (g CO2 eq/MJ-biomass) and direct WDs of 20.8 to 38.8 (Liters/MJ-biomass) over the range of scenarios analyzed. Further anaylsis reveals that the EROIfossil for production pathways is relatively location invariant, and that algae's life cycle energy balance and GHG impacts are highly dependent on cultivation and harvesting parameters. Contrarily, algae's direct water demands were found to be highly sensitive to geographic location, and thus may be a constraining factor in sustainable algal-derived biofuel production. Additionally, scenarios with promising EROIfossil and GHG emissions profiles are plagued with high technological uncertainty. Given the high variability in microalgae's energy and environmental performance, careful evaluation of the algae-to-fuel supply chain is necessary to ensure the long-term sustainability of emerging algal biofuel systems. Alternative production scenarios and technologies may have the potential to reduce the critical demands of biomass production, and should be considered to make algae a viable and more efficient biofuel alternative.

  17. Evaluating the effect of Locking on Multitenancy Isolation for Components of Cloud-hosted Services

    Directory of Open Access Journals (Sweden)

    Laud Charles Ochei

    2018-05-01

    Full Text Available Multitenancy isolation is a way of ensuring that the performance, stored data volume and access privileges required by one tenant and/or component does not affect other tenants and/or components. One of the conditions that can influence the varying degrees of isolation is when locking is enabled for a process or component that is being shared. Although the concept of locking has been extensively studied in database management, there is little or no research on how locking affects multitenancy isolation and its implications for optimizing the deployment of components of a cloud-hosted service in response to workload changes. This paper applies COMITRE (Component-based approach to Multitenancy Isolation through Request Re-routing to evaluate the impact of enabling locking for a shared process or component of a cloud-hosted application. Results show that locking has a significant effect on the performance and resource consumption of tenants especially for operations that interact directly with the local file system of the platform used on the cloud infrastructure. We also present recommendations for achieving the required degree of multitenancy isolation when locking is enabled for three software processes: continuous integration, version control, and bug tracking.

  18. Evaluation of relationship between metacognition components and dysfunctional attitudes in outpatients with bipolar mood disorder II

    Directory of Open Access Journals (Sweden)

    H Kazemi

    2012-05-01

    Full Text Available Introduction: The aim of this study was to evaluate the relationship between metacognitive components and dysfunctional attitudes in outpatients with bipolar mood disorder II. Methods: Thirty-six young adult outpatients with current diagnoses of BMD II(20 females and 16 males were recruited from Esfahan Counseling Center. Diagnoses were based on the Structured Clinical Interview for DSM-IV Axis I Disorder-Clinical Version(SCID-CV. A battery of questionnaires including Metacognition Questionnaire and Dysfunctional Attitude Scale(DAS were self-assessed by patients before medical therapy. Results: Pearson's correlation analysis showed that the components of metacognition and its relationship with dysfunctional attitudes is positive and significant(r= 28/0, p<0/05. Multiple regression analysis showed that two of the metacognitive components emerged as potentially useful in prediction of dysfunctional attitudes(negative beliefs about uncontrollability, danger and thoughts control. Also, results indicated that those two components have a significant positive relationship with vulnerability, perfectionism and effectivenessR²= 0/29, 0/35; p<0/05. Components of positive beliefs about worry and beliefs about cognitive self-consciousness related to cognitive confidence in predicting the criterion variable and its components showed no significant contribution. Conclusion: Study findings suggest that DSM-IV BMD II outpatients with metacognitive distortions have shown higher levels of dysfunctional attitudes.

  19. Utilization of Minor Actinides as a Fuel Component for Ultra-Long Life VHTR Configurations: Designs, Advantages and Limitations

    International Nuclear Information System (INIS)

    Tsvetkov, Pavel V.

    2009-01-01

    This project assessed the advantages and limitations of using minor actinides as a fuel component to achieve ultra-long life Very High Temperature Reactor (VHTR) configurations. Researchers considered and compared the capabilities of pebble-bed and prismatic core designs with advanced actinide fuels to achieve ultra-long operation without refueling. Since both core designs permit flexibility in component configuration, fuel utilization, and fuel management, it is possible to improve fissile properties of minor actinides by neutron spectrum shifting through configuration adjustments. The project studied advanced actinide fuels, which could reduce the long-term radio-toxicity and heat load of high-level waste sent to a geologic repository and enable recovery of the energy contained in spent fuel. The ultra-long core life autonomous approach may reduce the technical need for additional repositories and is capable to improve marketability of the Generation IV VHTR by allowing worldwide deployment, including remote regions and regions with limited industrial resources. Utilization of minor actinides in nuclear reactors facilitates developments of new fuel cycles towards sustainable nuclear energy scenarios.

  20. Utilization of Minor Actinides as a Fuel Component for Ultra-Long Life Bhr Configurations: Designs, Advantages and Limitations

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Pavel V. Tsvetkov

    2009-05-20

    This project assessed the advantages and limitations of using minor actinides as a fuel component to achieve ultra-long life Very High Temperature Reactor (VHTR) configurations. Researchers considered and compared the capabilities of pebble-bed and prismatic core designs with advanced actinide fuels to achieve ultra-long operation without refueling. Since both core designs permit flexibility in component configuration, fuel utilization, and fuel management, it is possible to improve fissile properties of minor actinides by neutron spectrum shifting through configuration adjustments. The project studied advanced actinide fuels, which could reduce the long-term radio-toxicity and heat load of high-level waste sent to a geologic repository and enable recovery of the energy contained in spent fuel. The ultra-long core life autonomous approach may reduce the technical need for additional repositories and is capable to improve marketability of the Generation IV VHTR by allowing worldwide deployment, including remote regions and regions with limited industrial resources. Utilization of minor actinides in nuclear reactors facilitates developments of new fuel cycles towards sustainable nuclear energy scenarios.

  1. The Cost Analysis of Corrosion Protection Solutions for Steel Components in Terms of the Object Life Cycle Cost

    Directory of Open Access Journals (Sweden)

    Kowalski Dariusz

    2017-09-01

    Full Text Available Steel materials, due to their numerous advantages - high availability, easiness of processing and possibility of almost any shaping are commonly applied in construction for carrying out basic carrier systems and auxiliary structures. However, the major disadvantage of this material is its high corrosion susceptibility, which depends strictly on the local conditions of the facility and the applied type of corrosion protection system. The paper presents an analysis of life cycle costs of structures installed on bridges used in the road lane conditions. Three anti-corrosion protection systems were considered, analyzing their essential cost components. The possibility of reducing significantly the costs associated with anti-corrosion protection at the stage of steel barriers maintenance over a period of 30 years has been indicated. The possibility of using a new approach based on the life cycle cost estimation in the anti-corrosion protection of steel elements is presented. The relationship between the method of steel barrier protection, the scope of repair, renewal work and costs is shown. The article proposes an optimal solution which, while reducing the cost of maintenance of road infrastructure components in the area of corrosion protection, allows to maintain certain safety standards for steel barriers that are installed on the bridge.

  2. Technique for the residual life assessment of high temperature components based on creep-rupture testing on welded miniature specimens

    Energy Technology Data Exchange (ETDEWEB)

    Garzillo, A.; Guardamagna, C.; Moscotti, L.; Ranzani, L. [Ente Nazionale per l`Energia Elettrica, Milan (Italy)

    1995-06-01

    Following the present trend in the development of advanced methodologies for residual life assessment of high temperature components operating in power plants, particularly in non destructive methods, a testing technique has been set up at ENEL-CRAM based on creep-rupture testa in an argon on welded miniature specimens. Five experimental systems for creep-rupture tests in an argon atmosphere have been set up which include high accuracy systems, vacuum chambers and exrwnsometer devices. With the aim of establishing and validating the suitability of the experimental methodology, creep-rupture and interrupted creep testing programmes have been performed on miniature specimens (2 mm diameter and 10 mm gauge lenght). On the basis of experience gathered by various European research laboratories, a miniature specimen construction procedure has been developed using a laser welding technique for joining threaded heads to sample material. Low alloy ferritic steels, such as virgin 2.25CrlMo, 0.5Cr 0.5Mo 0.25V, and IN 738 superalloy miniature specimens have been investigated and the results, compared with those from standard specimens, show a regular trend in deformation vs time. Additional efforts to provide guidelines for material sampling from each plant component will be required in order to reduce uncertainties in residual life prediction.

  3. The Cost Analysis of Corrosion Protection Solutions for Steel Components in Terms of the Object Life Cycle Cost

    Science.gov (United States)

    Kowalski, Dariusz; Grzyl, Beata; Kristowski, Adam

    2017-09-01

    Steel materials, due to their numerous advantages - high availability, easiness of processing and possibility of almost any shaping are commonly applied in construction for carrying out basic carrier systems and auxiliary structures. However, the major disadvantage of this material is its high corrosion susceptibility, which depends strictly on the local conditions of the facility and the applied type of corrosion protection system. The paper presents an analysis of life cycle costs of structures installed on bridges used in the road lane conditions. Three anti-corrosion protection systems were considered, analyzing their essential cost components. The possibility of reducing significantly the costs associated with anti-corrosion protection at the stage of steel barriers maintenance over a period of 30 years has been indicated. The possibility of using a new approach based on the life cycle cost estimation in the anti-corrosion protection of steel elements is presented. The relationship between the method of steel barrier protection, the scope of repair, renewal work and costs is shown. The article proposes an optimal solution which, while reducing the cost of maintenance of road infrastructure components in the area of corrosion protection, allows to maintain certain safety standards for steel barriers that are installed on the bridge.

  4. Evaluation of two streamlined life cycle assessment methods

    International Nuclear Information System (INIS)

    Hochschomer, Elisabeth; Finnveden, Goeran; Johansson, Jessica

    2002-02-01

    Two different methods for streamlined life cycle assessment (LCA) are described: the MECO-method and SLCA. Both methods are tested on an already made case-study on cars fuelled with petrol or ethanol, and electric cars with electricity produced from hydro power or coal. The report also contains some background information on LCA and streamlined LCA, and a deschption of the case study used. The evaluation of the MECO and SLCA-methods are based on a comparison of the results from the case study as well as practical aspects. One conclusion is that the SLCA-method has some limitations. Among the limitations are that the whole life-cycle is not covered, it requires quite a lot of information and there is room for arbitrariness. It is not very flexible instead it difficult to develop further. We are therefore not recommending the SLCA-method. The MECO-method does in comparison show several attractive features. It is also interesting to note that the MECO-method produces information that is complementary compared to a more traditional quantitative LCA. We suggest that the MECO method needs some further development and adjustment to Swedish conditions

  5. Life cycle assessment and sustainable engineering in the context of near net shape grown components: striving towards a sustainable way of future production.

    Science.gov (United States)

    Kämpfer, Christoph; Seiler, Thomas-Benjamin; Beger, Anna-Lena; Jacobs, Georg; Löwer, Manuel; Moser, Franziska; Reimer, Julia; Trautz, Martin; Usadel, Björn; Wormit, Alexandra; Hollert, Henner

    2017-01-01

    Technical product harvesting (TEPHA) is a newly developing interdisciplinary approach in which bio-based production is investigated from a technical and ecological perspective. Society's demand for ecologically produced and sustainably operable goods is a key driver for the substitution of conventional materials like metals or plastics through bio-based alternatives. Technical product harvesting of near net shape grown components describes the use of suitable biomass for the production of technical products through influencing the natural shape of plants during their growth period. The use of natural materials may show positive effects on the amount of non-renewable resource consumption. This also increases the product recyclability at the end of its life cycle. Furthermore, through the near net shape growth of biomass, production steps can be reduced. As a consequence such approaches may save energy and the needed resources like crude oil, coal or gas. The derived near net shape grown components are not only considered beneficial from an environmental point of view. They can also have mechanical advantages through an intrinsic topology optimization in contrast to common natural materials, which are influenced in their shape after harvesting. In order to prove these benefits a comprehensive, interdisciplinary scientific strategy is needed. Here, both mechanical investigations and life cycle assessment as a method of environmental evaluation are used.

  6. Point and interval forecasts of mortality rates and life expectancy: A comparison of ten principal component methods

    Directory of Open Access Journals (Sweden)

    Han Lin Shang

    2011-07-01

    Full Text Available Using the age- and sex-specific data of 14 developed countries, we compare the point and interval forecast accuracy and bias of ten principal component methods for forecasting mortality rates and life expectancy. The ten methods are variants and extensions of the Lee-Carter method. Based on one-step forecast errors, the weighted Hyndman-Ullah method provides the most accurate point forecasts of mortality rates and the Lee-Miller method is the least biased. For the accuracy and bias of life expectancy, the weighted Hyndman-Ullah method performs the best for female mortality and the Lee-Miller method for male mortality. While all methods underestimate variability in mortality rates, the more complex Hyndman-Ullah methods are more accurate than the simpler methods. The weighted Hyndman-Ullah method provides the most accurate interval forecasts for mortality rates, while the robust Hyndman-Ullah method provides the best interval forecast accuracy for life expectancy.

  7. Development of strength evaluation method for high-pressure ceramic components

    Energy Technology Data Exchange (ETDEWEB)

    Takegami, Hiroaki, E-mail: takegami.hiroaki@jaea.go.jp; Terada, Atsuhiko; Inagaki, Yoshiyuki

    2014-05-01

    Japan Atomic Energy Agency is conducting R and D on nuclear hydrogen production by the Iodine-Sulfur (IS) process. Since highly corrosive materials such as sulfuric and hydriodic acids are used in the IS process, it is very important to develop components made of corrosion resistant materials. Therefore, we have been developing a sulfuric acid decomposer made of a ceramic material, that is, silicon carbide (SiC), which shows excellent corrosion resistance to sulfuric acid. One of the key technological challenges for the practical use of a ceramic sulfuric acid decomposer made of SiC is to be licensed in accordance with the High Pressure Gas Safety Act for high-pressure operations of the IS process. Since the strength of a ceramic material depends on its geometric form, etc., the strength evaluation method required for a pressure design is not established. Therefore, we propose a novel strength evaluation method for SiC structures based on the effective volume theory in order to extend the range of application of the effective volume. We also developed a design method for ceramic apparatus with the strength evaluation method in order to obtain a license in accordance with the High Pressure Gas Safety Act. In this paper, the minimum strength of SiC components was calculated by Monte Carlo simulation, and the minimum strength evaluation method of SiC components was developed by using the results of simulation. The method was confirmed by fracture test of tube model and reference data.

  8. Applying the System Component and Operationally Relevant Evaluation (SCORE) Framework to Evaluate Advanced Military Technologies

    Science.gov (United States)

    2010-03-01

    and charac- terize the actions taken by the soldier (e.g., running, walking, climbing stairs ). Real-time image capture and exchange N The ability of...multimedia information sharing among soldiers in the field, two-way speech translation systems, and autonomous robotic platforms. Key words: Emerging...soldiers in the field, two-way speech translation systems, and autonomous robotic platforms. It has been the foundation for 10 technology evaluations

  9. Damage evaluation under thermal fatigue of a vertical target full scale component for the ITER divertor

    International Nuclear Information System (INIS)

    Missirlian, M.; Escourbiac, F.; Merola, M.; Durocher, A.; Bobin-Vastra, I.; Schedler, B.

    2007-01-01

    An extensive development programme has been carried out in the EU on high heat flux components within the ITER project. In this framework, a Full Scale Vertical Target (VTFS) prototype was manufactured with all the main features of the corresponding ITER divertor design. The fatigue cycling campaign on CFC and W armoured regions, proved the capability of such a component to meet the ITER requirements in terms of heat flux performances for the vertical target. This paper discusses thermographic examination and thermal fatigue testing results obtained on this component. The study includes thermal analysis, with a tentative proposal to evaluate with finite element approach the location/size of defects and the possible propagation during fatigue cycling

  10. Evaluation of the robustness of estimating five components from a skin spectral image

    Science.gov (United States)

    Akaho, Rina; Hirose, Misa; Tsumura, Norimichi

    2018-04-01

    We evaluated the robustness of a method used to estimate five components (i.e., melanin, oxy-hemoglobin, deoxy-hemoglobin, shading, and surface reflectance) from the spectral reflectance of skin at five wavelengths against noise and a change in epidermis thickness. We also estimated the five components from recorded images of age spots and circles under the eyes using the method. We found that noise in the image must be no more 0.1% to accurately estimate the five components and that the thickness of the epidermis affects the estimation. We acquired the distribution of major causes for age spots and circles under the eyes by applying the method to recorded spectral images.

  11. Damage Evaluation of Critical Components of Tilted Support Spring Nonlinear System under a Rectangular Pulse

    Directory of Open Access Journals (Sweden)

    Ningning Duan

    2015-01-01

    Full Text Available Dimensionless nonlinear dynamical equations of a tilted support spring nonlinear packaging system with critical components were obtained under a rectangular pulse. To evaluate the damage characteristics of shocks to packaged products with critical components, a concept of the damage boundary surface was presented and applied to a titled support spring system, with the dimensionless critical acceleration of the system, the dimensionless critical velocity, and the frequency parameter ratio of the system taken as the three basic parameters. Based on the numerical results, the effects of the frequency parameter ratio, the mass ratio, the dimensionless peak pulse acceleration, the angle of the system, and the damping ratio on the damage boundary surface of critical components were discussed. It was demonstrated that with the increase of the frequency parameter ratio, the decrease of the angle, and/or the increase of the mass ratio, the safety zone of critical components can be broadened, and increasing the dimensionless peak pulse acceleration or the damping ratio may lead to a decrease of the damage zone for critical components. The results may lead to a thorough understanding of the design principles for the tilted support spring nonlinear system.

  12. Evaluation of materials for heat exchanging components in advanced helium-cooled reactors

    International Nuclear Information System (INIS)

    Schubert, F.

    1984-01-01

    The qualification of metallic materials for advanced HTR applications is based on creep behaviour, fatigue properties, structural stability and corrosion resistance. A brief state of the art is provided for the materials for heat exchanging components. The experimental results are treated with respect to the importance for the design, the characteristic of time-depend materials behaviour are evaluated. Of specific interest are the possible effects of helium on the mechanical properties. Helium, which serves as primary coolant, contains traces of reactive impurities such as hydrogen, methane, carbon monoxide and water vapor. The evaluation of the HTR materials program serves as basis for structural design rules of components with operation temperatures above 800 deg C. The materials mechanical topics are discussed. Alloy improvement and the progress in development of new alloys are reviewed. (author)

  13. Development of safety factors to be used for evaluation of cracked nuclear components

    International Nuclear Information System (INIS)

    Brickstad, B.; Bergman, M.

    1996-10-01

    A modified concept for safety evaluation is introduced which separately accounts for the failure mechanisms fracture and plastic collapse. For application on nuclear components a set of safety factors are also proposed that retain the safety margins expressed in ASME, section III and XI. By performing comparative studies of the acceptance levels for surface cracks in pipes and a pressure vessel, it is shown that some of the anomalies connected with the old safety procedures are removed. It is the authors belief that the outlined safety evaluation procedure has the capability of treating cracks in a consistent way and that the procedure together with the proposed safety factors fulfill the basic safety requirements for nuclear components. Hopefully, it is possible in the near future to develop a probabilistic safety assessment procedure in Sweden, which enables a systematic treatment of uncertainties in the involved data. 14 refs

  14. Perceived Leadership Life Skills Developed through Participation at the Arkansas FFA Leadership Conference: A Program Evaluation

    Science.gov (United States)

    Ahrens, Chelsey Ann; Cox, Casandra Kay; Burris, Scott; Dykes, Mollie

    2015-01-01

    Youth leadership life skills are the "development of life skills necessary to perform leadership functions in real life" (Miller, 1976, p.2). A model developed by Kapostasy indicates life skills should be taught through FFA [formerly Future Farmers of America] (Staller, 2001). Thus, it is important to evaluate youth leadership life…

  15. A Method for Evaluating Information Security Governance (ISG) Components in Banking Environment

    Science.gov (United States)

    Ula, M.; Ula, M.; Fuadi, W.

    2017-02-01

    As modern banking increasingly relies on the internet and computer technologies to operate their businesses and market interactions, the threats and security breaches have highly increased in recent years. Insider and outsider attacks have caused global businesses lost trillions of Dollars a year. Therefore, that is a need for a proper framework to govern the information security in the banking system. The aim of this research is to propose and design an enhanced method to evaluate information security governance (ISG) implementation in banking environment. This research examines and compares the elements from the commonly used information security governance frameworks, standards and best practices. Their strength and weakness are considered in its approaches. The initial framework for governing the information security in banking system was constructed from document review. The framework was categorized into three levels which are Governance level, Managerial level, and technical level. The study further conducts an online survey for banking security professionals to get their professional judgment about the ISG most critical components and the importance for each ISG component that should be implemented in banking environment. Data from the survey was used to construct a mathematical model for ISG evaluation, component importance data used as weighting coefficient for the related component in the mathematical model. The research further develops a method for evaluating ISG implementation in banking based on the mathematical model. The proposed method was tested through real bank case study in an Indonesian local bank. The study evidently proves that the proposed method has sufficient coverage of ISG in banking environment and effectively evaluates the ISG implementation in banking environment.

  16. Evaluation of low dose ionizing radiation effect on some blood components in animal model

    OpenAIRE

    El-Shanshoury, H.; El-Shanshoury, G.; Abaza, A.

    2016-01-01

    Exposure to ionizing radiation is known to have lethal effects in blood cells. It is predicted that an individual may spend days, weeks or even months in a radiation field without becoming alarmed. The study aimed to discuss the evaluation of low dose ionizing radiation (IR) effect on some blood components in animal model. Hematological parameters were determined for 110 animal rats (divided into 8 groups) pre- and post-irradiation. An attempt to explain the blood changes resulting from both ...

  17. Damage and lifetime evaluation of three dimensional components subjected to complex loadings

    International Nuclear Information System (INIS)

    Comte, A.; Chator, T.

    1992-12-01

    Forecasting the mechanical behavior of structures and evaluating the lifetime of machine components are essential for the availability and safety of nuclear power stations. On this subject, Electricite de France has developed numerical methods for structural design with regard to cracking and damage to three dimensional structures. We explain here the methods adopted by the R and D Division which successfully produced the mechanical analysis for which it is responsible. (authors). 9 figs., 2 refs

  18. Formative Evaluation of the Behavior Change Components within a Colorado Weatherization Assistance Program

    Science.gov (United States)

    Sandoval, Perla K.

    A formative evaluation of behavior change elements of an ongoing Weatherization Assistance Program (WAP) offered by the Energy Resource Center (E.R.C.) in Denver, CO was conducted. The WAP as administered by the E.R.C. in Colorado saves residents an average 15% of energy consumption (E.R.C., 2015). However, research suggests that adding behavioral components to WAPs could increase energy savings to 21-26% (Gregory, 1992; APPRAISE, 2002). The goal of this evaluation is to provide recommendations to E.R.C. for program changes using Community Based Social Marketing (CBSM) and Theory of Planned Behavior. The CBSM Step 1- Step 3 is the focus of this formative evaluation. This program evaluation has four components: 1) review of written materials, 2) interviews with staff, 3) surveys mailed to E.R.C. clients and 4) in-home observations conducted with E.R.C. clients. Results of this formative evaluation has 3 sections of behaviors recommended for future intervention high priority, mid priority, and low priority recommendations based on CBSM penetration, probability, and impact factors. Behaviors that are listed as high priority for E.R.C. Behavioral intervention are cold water washing, hang drying, setting back thermostats, and window coverings. Overall increase in staff engagement is also recommended to be pursued. Each staff level is also given recommendations on how to engage in behavior change interventions.

  19. Quality of life evaluation of children with sleep bruxism

    Directory of Open Access Journals (Sweden)

    Gavião Maria

    2010-06-01

    Full Text Available Abstract Background The study of potential factors associated with sleep bruxism (SB may help in determining the etiology of such parafunction. Thus, this study aimed to evaluate the quality of life (QoL of children with SB by means of a generic scale, in addition to the association of sociodemographic characteristics and other parafunctional habits. Methods This cross-sectional study included healthy children of both genders, aged 7.18 ± 0.59 years, with (n = 25 and without (n = 69 signs and symptoms of SB. Data were collected in caries-free children from public schools by applying a translated and validated version of the Autoquestionnaire Qualite de Vie Enfant Image (AUQUEI, clinical examination and interview with the parents. The psychometric properties evaluated for the scale referred to internal consistency (ceiling and floor effects, Cronbach's Alpha coefficient, Items Correlation Matrix, and corrected Item-Total Correlation and the discriminant validity (t-test. By means of logistic regression with stepwise backward elimination, associations were evaluated between SB and age, gender, body mass index, maternal use of alcohol/tobacco/medicine during pregnancy, maternal age at birth, parent's schooling, presence of sucking habit, nail biting, enuresis, number of children, child's order (first born, occurrence of divorce/parent's death, and AUQUEI scores. Results The results of the AUQUEI psychometric analysis showed homogeneity of items and a Cronbach's alpha coefficient of 0.65; no negative correlations between the items were found. The mean AUQUEI scores for children with SB did not differ significantly from those of children without the parafunction. Only the independent variable "maternal age at birth" showed a significant negative association with SB. Conclusions In the studied sample, children with SB presented scores of QoL that were similar to those without the parafunction, and children from the youngest mothers were more likely

  20. Quality of life evaluation of children with sleep bruxism.

    Science.gov (United States)

    Castelo, Paula M; Barbosa, Taís S; Gavião, Maria Beatriz D

    2010-06-14

    The study of potential factors associated with sleep bruxism (SB) may help in determining the etiology of such parafunction. Thus, this study aimed to evaluate the quality of life (QoL) of children with SB by means of a generic scale, in addition to the association of sociodemographic characteristics and other parafunctional habits. This cross-sectional study included healthy children of both genders, aged 7.18 +/- 0.59 years, with (n = 25) and without (n = 69) signs and symptoms of SB. Data were collected in caries-free children from public schools by applying a translated and validated version of the Autoquestionnaire Qualite de Vie Enfant Image (AUQUEI), clinical examination and interview with the parents. The psychometric properties evaluated for the scale referred to internal consistency (ceiling and floor effects, Cronbach's Alpha coefficient, Items Correlation Matrix, and corrected Item-Total Correlation) and the discriminant validity (t-test). By means of logistic regression with stepwise backward elimination, associations were evaluated between SB and age, gender, body mass index, maternal use of alcohol/tobacco/medicine during pregnancy, maternal age at birth, parent's schooling, presence of sucking habit, nail biting, enuresis, number of children, child's order (first born), occurrence of divorce/parent's death, and AUQUEI scores. The results of the AUQUEI psychometric analysis showed homogeneity of items and a Cronbach's alpha coefficient of 0.65; no negative correlations between the items were found. The mean AUQUEI scores for children with SB did not differ significantly from those of children without the parafunction. Only the independent variable "maternal age at birth" showed a significant negative association with SB. In the studied sample, children with SB presented scores of QoL that were similar to those without the parafunction, and children from the youngest mothers were more likely to present SB.

  1. [Clinical evaluation of the ceramic femoral component used for reconstruction of total knee replacement].

    Science.gov (United States)

    Vavrík, P; Landor, I; Denk, F

    2008-12-01

    The study evaluates mid-term results of total knee replacement with a zirconia ceramic (ZrO2) femoral component. The evaluated group comprised 20 knees in 19 patients (4 men and 15 women). In one patient the replacement was performed bilaterally. Two patients had in the contralateral knee the same type of prosthesis with a femoral chrome-cobalt component.The mean age at the time of operation was 65.2 years (range, 38-81 years).The primary indication was 14 times osteoarthritis and 5 times rheumatoid arthritis. The average follow-up period was 6.5 years (range, 2.1-8.5 years). Patients included in the study regardless of age, body mass and the basic diagnosis, agreed with the use of the ceramic femoral component. The evaluation covered a range of motion, mechanical axis, joint stability, pain, swelling, ability to walk on level ground and on stairs, subjective satisfaction (EULAR Knee Chart). Radiograph were assessed at one year intervals in two projections to identify the incidence of radiolucency around the implant. The Kaplan-Meier survival curve was used and compared with the survival curve in identical chrome-cobalt implants. At he final follow-up, 14 knees were evaluated, because 3 patients died without any connection with the implant, in one case the tibial component migrated due to necrosis of the tibial condyle in a patient with RA and two implants had to be revised and replaced due to polyethylene wear. No infection or negative tissue reaction was recorded in the evaluated group. The average flexion range was 109 degrees. All knees were stable and without swelling, in two cases there occurred slight femoropatellar pain. Twelve patients were fully satisfied, 2 patients were satisfied with a certain reservation. The differences in the course of the survival curves of chrome-cobalt and ceramic implants were statistically insignificant. Although the use of zirconia ceramics in vitro reduces the amount of polyethylene wear, the clinical outcomes of total knee

  2. Failure and life cycle evaluation of watering valves.

    Science.gov (United States)

    Gonzalez, David M; Graciano, Sandy J; Karlstad, John; Leblanc, Mathias; Clark, Tom; Holmes, Scott; Reuter, Jon D

    2011-09-01

    Automated watering systems provide a reliable source of ad libitum water to animal cages. Our facility uses an automated water delivery system to support approximately 95% of the housed population (approximately 14,000 mouse cages). Drinking valve failure rates from 2002 through 2006 never exceeded the manufacturer standard of 0.1% total failure, based on monthly cage census and the number of floods. In 2007, we noted an increase in both flooding and cases of clinical dehydration in our mouse population. Using manufacturer's specifications for a water flow rate of 25 to 50 mL/min, we initiated a wide-scale screening of all valves used. During a 4-mo period, approximately 17,000 valves were assessed, of which 2200 failed according to scoring criteria (12.9% overall; 7.2% low flow; 1.6% no flow; 4.1% leaky). Factors leading to valve failures included residual metal shavings, silicone flash, introduced debris or bedding, and (most common) distortion of the autoclave-rated internal diaphragm and O-ring. Further evaluation revealed that despite normal autoclave conditions of heat, pressure, and steam, an extreme negative vacuum pull caused the valves' internal silicone components (diaphragm and O-ring) to become distorted and water-permeable. Normal flow rate often returned after a 'drying out' period, but components then reabsorbed water while on the animal rack or during subsequent autoclave cycles to revert to a variable flow condition. On the basis of our findings, we recalibrated autoclaves and initiated a preventative maintenance program to mitigate the risk of future valve failure.

  3. Evaluation of carbon-14 life cycle in reactors VVER-1000

    International Nuclear Information System (INIS)

    Lysakova, Katerina; Neumann, Jan; Vonkova, Katerina

    2012-09-01

    This work is aimed at the evaluation of carbon-14 life cycle in light water reactors VVER-1000. Carbon-14 is generated as a side product in different systems of nuclear reactors and has been an issue not only in radioactive waste management but mainly in release into the environment in the form of gaseous effluents. The principal sources of this radionuclide are in primary cooling water and fuel. Considerable amount of C-14 is generated by neutron reactions with oxygen 17 O and nitrogen 14 N present in water coolant and fuel. The reaction likelihood and consequently volume of generated radioisotope depends on several factors, especially on the effective cross-section, concentrations of parent elements and conditions of power plant operating strategies. Due to its long half-life and high capability of integration into the environment and thus into the living species, it is very important to monitor the movement of carbon-14 in all systems of nuclear power plant and to manage its release out of NPP. The dominant forms of radioactive carbon-14 are the hydrocarbons owing to the combinations with hydrogen used for absorption of radiolytic oxygen. These organic compounds, such as formaldehyde, methyl alcohol, ethyl alcohol and formic acid can be mostly retained on ion exchange resins used in the system for purifying primary cooling water. The gaseous carbon compounds (CH 4 and CO 2 ) are released into the atmosphere via the ventilation systems of NPP. Based on the information and data obtained from different sources, it has been designed a balance model of possible carbon-14 pathways throughout the whole NPP. This model includes also mass balance model equations for each important node in system and available sampling points which will be the background for further calculations. This document is specifically not to intended to describe the best monitoring program attributes or technologies but rather to provide evaluation of obtained data and find the optimal way to

  4. Components of Standing Postural Control Evaluated in Pediatric Balance Measures: A Scoping Review.

    Science.gov (United States)

    Sibley, Kathryn M; Beauchamp, Marla K; Van Ooteghem, Karen; Paterson, Marie; Wittmeier, Kristy D

    2017-10-01

    To identify measures of standing balance validated in pediatric populations, and to determine the components of postural control captured in each tool. Electronic searches of MEDLINE, Embase, and CINAHL databases using key word combinations of postural balance/equilibrium, psychometrics/reproducibility of results/predictive value of tests, and child/pediatrics; gray literature; and hand searches. Inclusion criteria were measures with a stated objective to assess balance, with pediatric (≤18y) populations, with at least 1 psychometric evaluation, with at least 1 standing task, with a standardized protocol and evaluation criteria, and published in English. Two reviewers independently identified studies for inclusion. There were 21 measures included. Two reviewers extracted descriptive characteristics, and 2 investigators independently coded components of balance in each measure using a systems perspective for postural control, an established framework for balance in pediatric populations. Components of balance evaluated in measures were underlying motor systems (100% of measures), anticipatory postural control (72%), static stability (62%), sensory integration (52%), dynamic stability (48%), functional stability limits (24%), cognitive influences (24%), verticality (9%), and reactive postural control (0%). Assessing children's balance with valid and comprehensive measures is important for ensuring development of safe mobility and independence with functional tasks. Balance measures validated in pediatric populations to date do not comprehensively assess standing postural control and omit some key components for safe mobility and independence. Existing balance measures, that have been validated in adult populations and address some of the existing gaps in pediatric measures, warrant consideration for validation in children. Copyright © 2017 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  5. Evaluation of the integrity and duration of the Laguna Verde nuclear power plant life- Plant Life Management program (PLIM). TC MEX 04/53 Technical Cooperation Project

    International Nuclear Information System (INIS)

    Arganis J, C.R.; Diaz S, A.; Aguilar T, J.A.

    2006-01-01

    As part of the IAEA TC MEX 04/53 Project 'Evaluation of the integrity and extension of life of the Laguna Verde nuclear power plant Handling Program of plant' whose objective is the one of beginning the actions to apply the methodology of Handling of plant life in the Unit 1 of the Laguna Verde Nucleo electric Central for to obtain the Renovation of License in 2020 the ININ, through the Department of Synthesis and Characterization of materials has carried out more of 20 analysis of susceptibility to the intergranular cracking for corrosion under effort in interns so much of the reactor of the unit 1 like of the unit 2 documenting the current state of components based on the type or types of materials that conform them, to it thermomechanical history, operational and of production, as well as of the particularities associated to its use and operation. For the application of the methodology of life handling of plant 5 structure systems or pilot components were selected, to carry out the programs of handling of the aging and handling of plant life: The encircling of the reactor core (Core Shroud), the reactor pressure vessel (Reactor Pressure Vessel), the primary container (Primary Containment), the recirculation system of feeding water (Reactor Feed Water) and cables. (Author)

  6. Development of a web-based aging monitoring system for an integrity evaluation of the major components in a nuclear power plant

    International Nuclear Information System (INIS)

    Choi, Jae-Boong; Yeum, Seung-Won; Ko, Han-Ok; Kim, Young-Jin; Kim, Hong-Key; Choi, Young-Hwan; Park, Youn-Won

    2010-01-01

    Structural and mechanical components in a nuclear power plant are designed to operate for its entire service life. Recently, a number of nuclear power plants are being operated beyond their design life to produce more electricity without shutting down. The critical issue in extending a lifetime is to maintain the level of safety during the extended operation period while satisfying the international regulatory standards. However, only a small portion of these components are of great importance for a significant aging degradation which would deeply affect the long-term safety and reliability of the related facilities. Therefore, it is beneficial to build a monitoring system to measure an aging status. While a number of integrity evaluation systems have been developed for NPPs, a real-time aging monitoring system has not been proposed yet . This paper proposes an expert system for the integrity evaluation of nuclear power plants based on a Web-based Reality Environment (WRE). The proposed system provides the integrity assessment for the major mechanical components of a nuclear power plant under concurrent working environments. In the WRE, it is possible for users to understand a mechanical system such as its size, geometry, coupling condition etc. In conclusion, it is anticipated that the proposed system can be used for a more efficient integrity evaluation of the major components subjected to an aging degradation.

  7. Development of a web-based aging monitoring system for an integrity evaluation of the major components in a nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jae-Boong, E-mail: boong33@skku.ed [SAFE Research Centre, School of Mechanical Engineering, Sungkyunkwan University, 300 Chunchun-dong, Jangan-gu, Suwon, Kyonggi-do 440-746 (Korea, Republic of); Yeum, Seung-Won; Ko, Han-Ok; Kim, Young-Jin [SAFE Research Centre, School of Mechanical Engineering, Sungkyunkwan University, 300 Chunchun-dong, Jangan-gu, Suwon, Kyonggi-do 440-746 (Korea, Republic of); Kim, Hong-Key; Choi, Young-Hwan; Park, Youn-Won [Korea Institute of Nuclear Safety, 34 Gwahak-ro, Yusong-ku, Teajon 305-338 (Korea, Republic of)

    2010-01-15

    Structural and mechanical components in a nuclear power plant are designed to operate for its entire service life. Recently, a number of nuclear power plants are being operated beyond their design life to produce more electricity without shutting down. The critical issue in extending a lifetime is to maintain the level of safety during the extended operation period while satisfying the international regulatory standards. However, only a small portion of these components are of great importance for a significant aging degradation which would deeply affect the long-term safety and reliability of the related facilities. Therefore, it is beneficial to build a monitoring system to measure an aging status. While a number of integrity evaluation systems have been developed for NPPs, a real-time aging monitoring system has not been proposed yet . This paper proposes an expert system for the integrity evaluation of nuclear power plants based on a Web-based Reality Environment (WRE). The proposed system provides the integrity assessment for the major mechanical components of a nuclear power plant under concurrent working environments. In the WRE, it is possible for users to understand a mechanical system such as its size, geometry, coupling condition etc. In conclusion, it is anticipated that the proposed system can be used for a more efficient integrity evaluation of the major components subjected to an aging degradation.

  8. Design and Psychometric Evaluation of the Quality of Life in Patients With Anal Fistula Questionnaire.

    Science.gov (United States)

    Ferrer-Márquez, Manuel; Espínola-Cortés, Natalia; Reina-Duarte, Angel; Granero-Molina, José; Fernández-Sola, Cayetano; Hernández-Padilla, José Manuel

    2017-10-01

    Quality of life is often considered when deciding and evaluating the treatment strategy for patients diagnosed with anal fistula. The purpose of this study was to develop and psychometrically test the Quality of Life in Patients with Anal Fistula Questionnaire. This was an observational cross-sectional study for the development and validation of a psychometric tool. The study was conducted at a general hospital in the southeast of Spain. A convenience sample included 54 patients diagnosed with anal fistula. The reliability of the tool was assessed through its internal consistency (Cronbach α) and temporal stability (Spearman correlation coefficient (r) between test-retest). The content validity index of the items and the scale was calculated. Correlation analysis and an ordinal regression analysis between the developed tool and the Short Form 12 Health Survey examined its concurrent validity. Principal component analysis and known-group analysis using the Kruskal-Wallis test examined its construct validity. The reliability of the developed questionnaire was very high (α = 0.908; r = 0.861; p questionnaire to detect expected differences in patients presenting with different symptomatology. The major limitations of this study were the use of a small sample of Spanish-speaking patients, not including patients in the initial development of the questionnaire, and developing the scoring system using a summation method. The Quality of Life in Patients with Anal Fistula Questionnaire has proven to be a valid, reliable, and concise tool that could contribute to the evaluation of quality of life among patients with an anal fistula. See Video Abstract at http://links.lww.com/DCR/A368.

  9. Smoking, health-related quality of life and economic evaluation.

    Science.gov (United States)

    López-Nicolás, Ángel; Trapero-Bertran, Marta; Muñoz, Celia

    2018-06-01

    The economic evaluation of tobacco control policies requires the adoption of assumptions about the impact of changes in smoking status on health-related quality of life (HRQoL). Estimates for such impacts are necessary for different populations. This paper aims to test whether smoking status has an independent effect on HRQoL over and above the effect derived from the increased likelihood of suffering a tobacco related disease, and to calculate utility values for the Spanish population. Using data from the Spanish Encuesta Nacional de Salud of 2011-12, we estimate statistical models for HRQoL as measured by the EQ-5D-5L instrument as a function of smoking status. We include a comprehensive set of controls for biological, clinical, lifestyle and socioeconomic characteristics. Smoking status has an independent, statistically significant effect on HRQoL. However, the size of the effect is small. The typical smoking related diseases, such as lung cancer, are associated with a reduction in HRQoL about 5 times larger than the difference between current smokers and never smokers. Attributing substantive HRQoL gains to quitting smoking as well as accounting for the concomitant HRQoL gain derived from a smaller likelihood of contracting tobacco related diseases might lead to an overestimation of the benefits of tobacco control policies. Nonetheless, the relatively large drops in HRQoL associated with being diagnosed with diseases that might be causally linked to tobacco suggest that such diseases should not be omitted from the economic evaluations of tobacco control policies.

  10. Bayesian methodology for generic seismic fragility evaluation of components in nuclear power plants

    International Nuclear Information System (INIS)

    Yamaguchi, Akira; Campbell, R.D.; Ravindra, M.K.

    1991-01-01

    Bayesian methodology for updating the seismic fragility of components in nuclear power plants is presented. The generic fragility data which have been evaluated based on the past SPSAs are combined with the seismic experience data. Although the seismic experience is limited to the acceleration range below the median capacity of the components, it has been found that the evidence is effective to update the fragility tail. In other words, the uncertainty of the fragility is reduced although the median capacity itself is not modified to a great extent. The annual frequency of failure is also reduced as a result of the updating of the fragility tail. The PDF of the seismic capacity is handled in discrete form, which enables the use of arbitrary type of prior distribution. Accordingly, the Log-N prior can be used which is consistent with the widely used fragility model. For evaluating posterior fragility parameters (A m and B U ), two methods have been proposed. Furthermore, it has been found that the importance of evidence used in the Bayesian methodology can be quantified by the entropy of the evidence. Only the events with high entropy need to be considered in the Bayesian updating of the fragility. The currently available seismic experience database for typical components can be utilized to develop the fragility tail which is contributive to the seismically-induced failure frequency. The combined use of generic fragility and seismic experience data, with the aid of Bayesian methodology, provides refined generic fragility curves which are useful for SPSA studies. (author)

  11. Component evaluation for intersystem loss-of-coolant accidents in advanced light water reactors

    International Nuclear Information System (INIS)

    Ware, A.G.

    1994-07-01

    Using the methodology outlined in NUREG/CR-5603 this report evaluates (on a probabilistic basis) design rules for components in ALWRs that could be subjected to intersystem loss-of-coolant accidents (ISLOCAs). The methodology is intended for piping elements, flange connections, on-line pumps and valves, and heat exchangers. The NRC has directed that the design rules be evaluated for BWR pressures of 7.04 MPa (1025 psig), PWR pressures of 15.4 MPa (2235 psig), and 177 degrees C (350 degrees F), and has established a goal of 90% probability that system rupture will not occur during an ISLOCA event. The results of the calculations in this report show that components designed for a pressure of 0.4 of the reactor coolant system operating pressure will satisfy the NRC survival goal in most cases. Specific recommendations for component strengths for BWR and PWR applications are made in the report. A peer review panel of nationally recognized experts was selected to review and critique the initial results of this program

  12. [Integrated evaluation of circular agriculture system: a life cycle perspective].

    Science.gov (United States)

    Liang, Long; Chen, Yuan-Quan; Gao, Wang-Sheng

    2010-11-01

    For the point of view that recycling economy system is one of ways to achieve the low-carbon economy, we have made an evaluation on a typical circular agriculture duck industry in Hunan Province, China, through improving the framework of life cycle assessment (LCA). The analysis indicated that the consumption of non-renewable resources, land and water were 48.629 MJ, 2.36 m2 and 1 321.41 kg, while the potential greenhouse gas (GHGs), acidification, eutrophication, human toxicity, freshwater ecotoxicity and terrestrial ecotoxicity were 11 543.26 g (CO2 eq), 52.36g (SO2eq), 25.83g (PO4eq), 1.26, 60.74 and 24.65 g (1,4-DCBeq), respectively. The potential damage of aquatic eutrophication, freshwater ecotoxicity and terrestrial ecotoxicity was more serious than that of GHGs. Main results were following: i. the circular agricultural chain promoted the principle of "moderate circulation", which based on the traditional production methods; ii. circular agriculture could not blindly pursue low carbon development. Instead, soil and biological carbon sequestration should be considered, in addition to reducing carbon emissions; iii. circular economy and circular agriculture should take other potential environmental impacts into account such as acidification, eutrophication and ecotoxicity,with the exception to carbon emissions,to developed integrated system assessment; iv. LCA could provide a comprehensive assessment of circular agriculture, and it was worth of further study.

  13. Using Survival Analysis to Evaluate Medical Equipment Battery Life.

    Science.gov (United States)

    Kuhajda, David

    2016-01-01

    As hospital medical device managers obtain more data, opportunities exist for using the data to improve medical device management, enhance patient safety, and evaluate costs of decisions. As a demonstration of the ability to use data analytics, this article applies survival analysis statistical techniques to assist in making decisions on medical equipment maintenance. The analysis was performed on a large amount of data related to failures of an infusion pump manufacturer's lithium battery and two aftermarket replacement lithium batteries from one hospital facility. The survival analysis resulted in statistical evidence showing that one of the third-party batteries had a lower survival curve than the infusion pump manufacturer's battery. This lower survival curve translates to a shorter expected life before replacement is needed. The data suggested that to limit unexpected failures, replacing batteries at a two-year interval, rather than the current industry recommendation of three years, may be warranted. For less than $5,400 in additional annual cost, the risk of unexpected battery failures can be reduced from an estimated 28% to an estimated 7%.

  14. Life cycle evaluation of emerging lignocellulosic ethanol conversion technologies.

    Science.gov (United States)

    Spatari, Sabrina; Bagley, David M; MacLean, Heather L

    2010-01-01

    Lignocellulosic ethanol holds promise for addressing climate change and energy security issues associated with personal transportation through lowering the fuel mixes' carbon intensity and petroleum demand. We compare the technological features and life cycle environmental impacts of near- and mid-term ethanol bioconversion technologies in the United States. Key uncertainties in the major processes: pre-treatment, hydrolysis, and fermentation are evaluated. The potential to reduce fossil energy use and greenhouse gas (GHG) emissions varies among bioconversion processes, although all options studied are considerably more attractive than gasoline. Anticipated future performance is found to be considerably more attractive than that published in the literature as being achieved to date. Electricity co-product credits are important in characterizing the GHG impacts of different ethanol production pathways; however, in the absence of near-term liquid transportation fuel alternatives to gasoline, optimizing ethanol facilities to produce ethanol (as opposed to co-products) is important for reducing the carbon intensity of the road transportation sector and for energy security.

  15. Reinforced wind turbine blades--an environmental life cycle evaluation.

    Science.gov (United States)

    Merugula, Laura; Khanna, Vikas; Bakshi, Bhavik R

    2012-09-04

    A fiberglass composite reinforced with carbon nanofibers (CNF) at the resin-fiber interface is being developed for potential use in wind turbine blades. An energy and midpoint impact assessment was performed to gauge impacts of scaling production to blades 40 m and longer. Higher loadings force trade-offs in energy return on investment and midpoint impacts relative to the base case while remaining superior to thermoelectric power generation in these indicators. Energy-intensive production of CNFs forces impacts disproportionate to mass contribution. The polymer nanocomposite increases a 2 MW plant's global warming potential nearly 100% per kWh electricity generated with 5% CNF by mass in the blades if no increase in electrical output is realized. The relative scale of impact must be compensated by systematic improvements whether by deployment in higher potential zones or by increased life span; the trade-offs are expected to be significantly lessened with CNF manufacturing maturity. Significant challenges are faced in evaluating emerging technologies including uncertainty in future scenarios and process scaling. Inventories available for raw materials and monte carlos analysis have been used to gain insight to impacts of this development.

  16. Shock Analysis Method for Systematic Performance Evaluation of Component Embedded in Handheld Electronic Devices

    Directory of Open Access Journals (Sweden)

    C.S. Chin

    2006-01-01

    Full Text Available It is important to identify the robustness of product (or embedded component inside the product against shock due to free drop. With the increasing mobile and fast-paced lifestyle of the average consumer, much is required of the products; such as consumers expect mobile products to continue to operate after drop impact. Since free drop test is commonly used to evaluate the robustness of small component embedded in MP3 player, it is difficult to produce a repeatable shock reading due to highly uncontrolled orientation during the impact on ground. Hence attention has been focus on shock table testing, which produces a higher repeatable result. But it failed to demonstrate the actual shock with the presence of rotational movement due to free drop and also it suffers from a similar limitation of repeatability. From drop to drop, shock tables can vary about ± 5% in velocity change but suitable for making a consistent tracking the product improvement.

  17. Replication quality assessment and uncertainty evaluation of a polymer precision injection moulded component

    DEFF Research Database (Denmark)

    Baruffi, Federico; Calaon, Matteo; Tosello, Guido

    2017-01-01

    Precision injection moulding holds a central role in manufacturing as only replication process currently capable of accurately producing complex shaped polymer parts integrating micrometric features on a mass scale production. In this scenario, a study on the replication quality of a polymer...... injection moulded precision component for telecommunication applications is presented. The effects of the process parameters on the component dimensional variation have been investigated using a statistical approach. Replication fidelity of produced parts has been assessed using a focus variation microscope...... with sub-micrometric resolution. Measurement uncertainty has then been evaluated, according to the GUM considering contributions from different process settings combinations and mould geometries. The analysis showed that the injection moulding manufacturing process and the utilized measurement chain...

  18. Fatigue test results of flat plate specimens with surface cracks and evaluation of crack growth in structural components

    International Nuclear Information System (INIS)

    Shibata, Katsuyuki; Yokoyama, Norio; Ohba, Toshihiro; Kawamura, Takaichi; Miyazono, Shohachiro

    1982-12-01

    Part-through surface cracks are most frequently observed in the inspection of structural components, and it is one of the important subjects in the assessment of safety to evaluate appropriately the growth of such cracks during the service life of structural components. Due to the complexity of the stress at the front free surface, the crack growth at the surface shows a different behavior from the other part. Besides, an effect of interaction is caused in the growth of multiple surface cracks. These effects should be included in the growth analysis of surface part-through cracks. Authors have carried out a series of fatigue tests on some kinds of pipes with multiple cracks in the inner surface, and subsequently the fatigue test of flat plate specimens, made of Type 304L stainless steel, with a single or double surface cracks was carried out to study the basic characteristics in the growth of multiple surface cracks. Based on the results of the flat plate test. the correction factors for the front free surface (Cs) and interaction (Ci) of surface cracks were derived quantitatively by the following empirical expressions; Cs = 0.824. Ci = (0.227(a/b) 2 (sec(PI X/2) - 1) + 1)sup(1/m). Using these two correction factors, a procedure to predict the growth of surface cracks was developed by applying the crack growth formula to both the thickness and surface directions. Besides, the crack growth predictions based on the procedure of ASME Code Sex. XI, and the above procedure without the correction of the free surface and interactions on the crack growth behaviors were compared with the test results of flat plate specimens. The crack growth behavior predicted by the procedure described in this report showed the best agreement with the test results in respects of the crack growth life and the change in the crack shape. The criteria of the ASME Code did not agree with the test results. (author)

  19. A New Strategy for Quality Evaluation and Identification of Representative Chemical Components in Polygonum multiflorum Thunb.

    Directory of Open Access Journals (Sweden)

    Yun-xia Li

    2017-01-01

    Full Text Available Polygonum multiflorum Thunb. (HSW is widely used as herb medicine and health food additive. Recently, a series of HSW-induced hepatotoxicities have been reported and many studies have been carried out to investigate it. But contradictory conclusions were drawn that might be caused by the inconsistent quality of market decoction pieces. Therefore, the HSW decoction pieces quality was evaluated with a developed novel method in the paper. 25 batches of raw HSW (RHSW and 21 batches of processed HSW (PHSW samples were purchased from different provinces of China. HPLC determination was performed to identify and detect the contents of 16 chemical compounds in herbal material. Fingerprint similarity was analyzed using chromatography information and the results showed that most herbs were in good similarity. Then, a comprehensive evaluation strategy based on principal component analysis with representative quality control indicators was developed to evaluate the quality of HSW samples. And the rationality of the developed method was verified by HCA analysis. The results showed that the herb from Dabashan, Sichuan Province, no matter RHSW or PHSW had the best quality. Different representative components were selected for RHSW or PHSW decoction pieces which might be caused by the chemical reaction during processing. And most PHSW were unqualified according to the requirement of Chinese Pharmacopeia which might take the responsibility for the toxicity of HSW.

  20. An Evaluation Tool for CONUS-Scale Estimates of Components of the Water Balance

    Science.gov (United States)

    Saxe, S.; Hay, L.; Farmer, W. H.; Markstrom, S. L.; Kiang, J. E.

    2016-12-01

    Numerous research groups are independently developing data products to represent various components of the water balance (e.g. runoff, evapotranspiration, recharge, snow water equivalent, soil moisture, and climate) at the scale of the conterminous United States. These data products are derived from a range of sources, including direct measurement, remotely-sensed measurement, and statistical and deterministic model simulations. An evaluation tool is needed to compare these data products and the components of the water balance they contain in order to identify the gaps in the understanding and representation of continental-scale hydrologic processes. An ideal tool will be an objective, universally agreed upon, framework to address questions related to closing the water balance. This type of generic, model agnostic evaluation tool would facilitate collaboration amongst different hydrologic research groups and improve modeling capabilities with respect to continental-scale water resources. By adopting a comprehensive framework to consider hydrologic modeling in the context of a complete water balance, it is possible to identify weaknesses in process modeling, data product representation and regional hydrologic variation. As part of its National Water Census initiative, the U.S. Geological survey is facilitating this dialogue to developing prototype evaluation tools.

  1. The usefulness of Quality of Life Childhood Epilepsy (QOLCE) questionnaire in evaluating the quality of life of children with epilepsy.

    Science.gov (United States)

    Talarska, D

    2007-01-01

    Evaluation of quality of life has become a frequently used method in treatment effects supervision. Quality of Life Childhood Epilepsy (QOLCE) questionnaire, which is completed by patients' parents, has been prepared for children with epilepsy. It enables to determine the quality of life in children aged 4-18 years. The aim of the study was to show the usefulness of QOLCE questionnaire in evaluating the quality of life of children with epilepsy. 160 epileptic children, aged 8-18 years and their parents were examined in the Chair and Department of Developmental Neurology, K. Marcinkowski University of Medical Sciences in Poznań. QOLCE questionnaire was completed by parents and "Young people and epilepsy" questionnaire was designed for children. Reliability index of the complete questionnaire in own research and in the original amounted to 0.93 Cronbach alpha coefficient. Epileptic, drug-resistant children constituted 28% of the examined group. Parents of children with controlled seizures evaluated children's functioning in analyzed areas of quality of life higher. 1. QOLCE questionnaire is a suitable tool to evaluate the quality of children's and adolescents' life. 2. The most significant differences in functioning of epileptic, drug-resistant patients and those with controlled seizures were observed in areas of cognitive processes and social activity.

  2. An empirical investigation into the determinants and persistence of happiness and life evaluation

    OpenAIRE

    Chrostek, Pawel

    2013-01-01

    A comparison of measures of happiness and life evaluation indicates significant differences in correlates. Life evaluation is less dependent on external circumstances than happiness. Temporary changes in health, labour market status and income have a smaller impact on life evaluation than on happiness. Despite the differences both types of well-being exhibit a positive relation between current and past well-being. This result contradicts the hypothesis of general habituation.

  3. Experience with the source evaluation board method of procuring technical components for the Fermilab Main Injector

    International Nuclear Information System (INIS)

    Harding, D.J.; Collins, J.P.; Kobliska, G.R.; Chester, N.S.; Pewitt, E.G.; Fowler, W.B.

    1993-01-01

    Fermilab has adopted the Source Evaluation Board (SEB) method for procuring certain major technical components of the Fermilab Main Injector. The SEB procedure is designed to ensure the efficient and effective expenditure of Government funds at the same time that it optimizes the opportunity for attainment of project objectives. A qualitative trade-off is allowed between price and technical factors. The process involves a large amount of work and is only justified for a very limited number of procurements. Fermilab has gained experience with the SEB process in awarding subcontracts for major subassemblies of the Fermilab Main Injector dipoles

  4. Integrity evaluation of power plant components by fracture mechanics and related techniques

    International Nuclear Information System (INIS)

    Mukherjee, B.; Vanderglas, M.L.; Davies, P.H.

    1982-01-01

    Power plant components can be subject to unexpected failures with serious consequences, unless careful attention is paid to minute crack defects and their possible growth. The Linear Elastic Fracture Mechanics approach to structural integrity evaluation, as it appears in the ASME Code, is discussed. Projects related to material data generation and the development of structural analysis methods to make the above method usable are described. Several integrity-related questions outside the scope of the Code guidelines are documented, concluding with comments on possible future developments

  5. Emission of toxic components as a factor of the best practice options for waste management: Application of LCA (Life Cycle Assessment

    Directory of Open Access Journals (Sweden)

    Stevanović-Čarapina Hristina D.

    2011-01-01

    Full Text Available Health and safety have been the major concerns in waste management. Waste must be managed in a way that minimizes risk to human health. Environmental concerns over the management and disposal of waste can be divided into two major areas: conservation of resources and pollution of the environment. Integrated Waste Management (IWM systems combine waste streams, waste collection, treatment and disposal methods, with the objective of achieving environmental benefits, economic optimization and societal acceptability. Integrated waste management using Life Cycle Assessment (LCA attempts to offer the most benign options for waste management. LCA is a compilation and evaluation of the inputs, the outputs and the potential environmental impacts of a product system throughout its life cycle. It can be successfully applied to municipal solid waste management systems to identify the overall environmental burdens and to assess the potential environmental impacts. This paper deals with the LCA of the two waste management options for final disposal of municipal waste, landfilling (landfill without landfill gas collection or leachate collection and sanitary landfilling (landfill with landfill gas collection and recovery and leachate collection and treatments analyzed for town Sombor, Serbia. The research is conducted with the use of the Software Package IWM-2. The indicators which are used in the assessment are air and water emissions of toxic compounds. The results indicated that waste disposal practice has a significant effect on the emission of the toxic components and environmental burdens. Sanitary landfilling of municipal solid waste significantly reduces toxic emission and negative influence on the environment.

  6. Pilot Evaluation Study of the Life Skills Program REBOUND

    Directory of Open Access Journals (Sweden)

    Henrik Jungaberle

    2015-11-01

    Full Text Available The main aim of the study is pilot evaluation of the life skills program REBOUND in a school context focusing on substance use, risk perception, and knowledge about psychoactive substances ( n IG + CG = 723 students in five schools and 46 classes, Mage = 14.8, range 14-18 for the total sample and in the subgroups gender, age, and school type. Main goal of the study is collecting evidence for program optimization. A controlled study was carried out with repeated measurement before and after the intervention (4-6 months. Multilevel analyses, ANCOVA, and logistic regression analyses were applied to measure the effects. Overall, significantly lower incidence rates of drunkenness (odds ratio [OR] = .55; p = .033, improved knowledge about psychoactive substances (p = .006, lower personal (p = .013 and general tobacco risk perception among users (p = .002, and lower general tobacco (p = .018 and cannabis (p = .000 risk perception in non-users were found in the total intervention group. In subgroups, significantly lower rates for the incidence of drunkenness can be shown for males (p = .008 and for younger participants (p = .004. Students at academic high school (German Gymnasium showed a decrease in 30-day prevalence for alcohol (p = .017 and cannabis (p = .014, and they improved in their knowledge about psychoactive substances (p = .000. In vocational high school classes (German Realschule, there was an increase in the relative alcohol risk perception of the students (p = .019. REBOUND contributes to a controlled use of alcohol and increases knowledge about psychoactive substances. REBOUND has various effects on the examined subgroups age, gender, and school type: Males, younger students, and students in academic high school benefitted more from the course regarding consumption-related criteria. We suggest a program optimization specific to school form and age, inclusion of a tobacco intervention, and the use of more gender-segregated interventions.

  7. Methodologies for verification and validation of expert systems as a function of component, criticality and life-cycle phase

    International Nuclear Information System (INIS)

    Miller, L.

    1992-01-01

    The review of verification and validation (V and V) methods presented here is based on results of the initial two tasks of a contract with the US Nuclear Regulatory Commission and the Electric Power Research Institute to Develop and Document Guidelines for Verifying and Validating Expert Systems. The first task was to review the applicability of conventional software techniques to expert systems; the second was to directly survey V and V practices associated with development of expert systems. Subsequent tasks will focus on selecting, synthesizing or developing V and V methods appropriate for the overall system, for specific expert systems components, and for different phases of the life-cycle. In addition, final guidelines will most likely be developed for each of three levels of expert systems: safety-related (systems whose functions directly relate to system safety, so-called safety-critical systems), important-to-safety (systems which support the critical safety functions), and non-safety (systems which are unrelated to safety functions). For the present purposes of categorizing and discussing various types of V and V methods, the authors simplify the life-cycle and consider only two aspects - systems validation phase. The authors identified a number of techniques for the first, combined, phase and two general classes of V and V techniques for the latter phase: static testing techniques, which do not involve execution of the system code, and dynamic testing techniques, which do. In the next two sections the author reviews first the applicability to expert systems of conventional V and V techniques and, second, the techniques expert system developers actually use. In the last section the authors make some general observations

  8. The evaluation of extensive intraductal component (EIC) in breast carcinoma using MR mammography

    Energy Technology Data Exchange (ETDEWEB)

    Saito, Yasuhiro; Mineta, Masayuki; Yamada, Tomonori [Asahikawa Medical Univ. (Japan)] [and others

    1997-10-01

    Twenty-one patients with breast cancer underwent MR mammography (MRM) for evaluation of extensive intraductal component (EIC). Linear or small nodular structures continuing to main tumor, irregular margin, and early stain on dynamic scan were considered to be suggestive of EIC. The sensitivity, specificity and accuracy of detecting EIC were 88.9%, 91.7% and 90.5%, respectively. Misleading structures or pathological conditions to distinguish from EIC on MRM were interstitial connective tissue, interstitial spreading of the cancer, mastitis, and vessels. Although MRM appears to be very useful in evaluating EIC of the breast cancer, it is necessary for the radiologist to understand that there are several misleading signal intensities or abnormal enhancement to discriminate from EIC. (author)

  9. On-Site Evaluation of Large Components Using Saft and Tofd Ultrasonic Imaging

    Science.gov (United States)

    Spies, M.; Rieder, H.; Dillhöfer, A.

    2011-06-01

    This contribution addresses ultrasonic inspection and evaluation of welds in large components. An approach has been developed in order to enhance the reliability of welded ship propellers. The Synthetic Aperture Focusing Technique (SAFT) has been modified with regard to the curved surfaces and the sound attenuation of cast Ni-Al bronzes. For weld inspection in steels the Time-of-Flight Diffraction technique (TOFD) can provide additional information for specific defect orientations. Both techniques have been combined in view of the determination of defect sizes and shapes in longitudinal welds of pipes with diameters of up to 48 inches. Details on the inspection and evaluation concepts as well as experimental results are presented.

  10. Evaluation of heat exchange performance for the auxiliary component cooling water system cooling tower in HTTR

    International Nuclear Information System (INIS)

    Tochio, Daisuke; Kameyama, Yasuhiko; Shimizu, Atsushi; Inoi, Hiroyuki; Yamazaki, Kazunori; Shimizu, Yasunori; Aragaki, Etsushi; Ota, Yukimaru; Fujimoto, Nozomu

    2006-09-01

    The auxiliary component cooling water system (ACCWS) is one of the cooling system in High Temperature Engineering Test Reactor (HTTR). The ACCWS has main two features, many facilities cooling, and heat sink of the vessel cooling system which is one of the engineering safety features. Therefore, the ACCWS is required to satisfy the design criteria of heat removal performance. In this report, heat exchange performance data of the rise-to-power-up test and the in-service operation for the ACCWS cooling tower was evaluated. Moreover, the evaluated values were compared with the design values, and it is confirmed that ACCWS cooling tower has the required heat exchange performance in the design. (author)

  11. Sarcopenia Is Associated With Physical and Mental Components of Health-Related Quality of Life in Older Adults.

    Science.gov (United States)

    Manrique-Espinoza, Betty; Salinas-Rodríguez, Aarón; Rosas-Carrasco, Oscar; Gutiérrez-Robledo, Luis Miguel; Avila-Funes, José Alberto

    2017-07-01

    To estimate the association between sarcopenia and the health-related quality of life (HRQoL) among community-dwelling older adults. Cross-sectional analysis of a prospective cohort. The Rural Frailty Study, a prospective study on the prevalence of frailty in rural settings in Mexico, with baseline and follow-up measurements conducted in 2009 and 2013, respectively. Five hundred forty-three men and women older than 70 years. Information regarding demographic characteristics, comorbidities, mental status, dependency in activities of daily living, frailty, HRQoL, and other characteristics was obtained. Objective measurements of muscle strength and physical performance were grip strength using a manual hydraulic dynamometer and walking speed; measure of low muscle was by a calf circumference. Sarcopenia was defined according to the European Working Group on Sarcopenia in Older People criteria. Physical and mental components of the HRQoL were measured through the Medical Outcomes Study Health Survey Questionnaire 36-Item Short Form. Prevalence of sarcopenia was 20.6% for severe and 15.8% for moderate. After adjusting for sociodemographic and health characteristics, severe sarcopenia was significantly and inversely associated with both the physical (β = -5.39; P = .010) and the mental components (β = -3.69; P = .057) of HRQoL when compared with pre- and nonsarcopenic individuals. Our results on the association between sarcopenia and HRQoL suggest that the latter declines in the presence of severe sarcopenia in older adults. This finding highlights the relevance of the early detection of sarcopenia in older individuals, and even that its detection must be a part of routine diagnosis procedures. Copyright © 2017 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

  12. Influences of 3D PET scanner components on increased scatter evaluated by a Monte Carlo simulation

    Science.gov (United States)

    Hirano, Yoshiyuki; Koshino, Kazuhiro; Iida, Hidehiro

    2017-05-01

    Monte Carlo simulation is widely applied to evaluate the performance of three-dimensional positron emission tomography (3D-PET). For accurate scatter simulations, all components that generate scatter need to be taken into account. The aim of this work was to identify the components that influence scatter. The simulated geometries of a PET scanner were: a precisely reproduced configuration including all of the components; a configuration with the bed, the tunnel and shields; a configuration with the bed and shields; and the simplest geometry with only the bed. We measured and simulated the scatter fraction using two different set-ups: (1) as prescribed by NEMA-NU 2007 and (2) a similar set-up but with a shorter line source, so that all activity was contained only inside the field-of-view (FOV), in order to reduce influences of components outside the FOV. The scatter fractions for the two experimental set-ups were, respectively, 45% and 38%. Regarding the geometrical configurations, the former two configurations gave simulation results in good agreement with the experimental results, but simulation results of the simplest geometry were significantly different at the edge of the FOV. From the simulation of the precise configuration, the object (scatter phantom) was the source of more than 90% of the scatter. This was also confirmed by visualization of photon trajectories. Then, the bed and the tunnel were mainly the sources of the rest of the scatter. From the simulation results, we concluded that the precise construction was not needed; the shields, the tunnel, the bed and the object were sufficient for accurate scatter simulations.

  13. Evaluating the quality of life in children with gastroesophagel reflux disease

    Directory of Open Access Journals (Sweden)

    I.M. Nesinа

    2017-08-01

    Full Text Available Background. The purpose of the study was the assessment of the quality of life in adolescents with gastroesophageal reflux disease (GERD during the treatment. Materials and methods. 49 children aged 13–17 years with gastroesophageal reflux disease were examined. The comparison group consisted of 40 apparently healthy children of the same age. The effectiveness of therapy was evaluated during the treatment and in catamnesis, three months later. Quality of life was assessed using the PedsQL 4.0 inventory adapted for children aged 13 to 18 years, and GSRS — a specialized questionnaire for patients with digestive system diseases. Results. It was found that during the exacerbation of GERD, PedsQL 4.0 scores for all scales of the quality of life, especially psychophysiological features in children, reduced significantly by parent’s estimations. According to the GSRS questionnaire, a positive clinical effect was observed after the treatment, but the analysis of the PedsQL 4.0 inventory scales showed that the rates remained significantly lower compared to the control group. Only after 3 months, there was a positive trend toward increasing the number of points according to all the criteria of the PedsQL 4.0 inventory, which described improvements in the quality of teenager’s lives. Conclusions. The study of the quality of life parameters in the period of GERD clinical remission is a necessary component of treatment and the main criterion for assessing the state in adolescents. It allow to determine the clinical effectiveness and time of the main course of therapy, as well as to predict further course of the disease.

  14. An Initial Evaluation of the Comprehensive Quality of Life Scale--Intellectual Disability.

    Science.gov (United States)

    Cummins, Robert A.; And Others

    1997-01-01

    A study of 59 Australian people with an intellectual disability and 69 university students evaluated a new scale to measure the life quality of people with an intellectual disability. The Comprehensive Quality of Life Scale--Intellectual Disability was found to be a useful instrument to measure comparative life quality. (Author/CR)

  15. Impact of High-Power Pulsed Light on Microbial Contamination, Health Promoting Components and Shelf Life of Strawberries

    Directory of Open Access Journals (Sweden)

    Irina Buchovec

    2013-01-01

    Full Text Available The aim of this work is to evaluate the impact of high-power pulsed light (HPPL on the microbial control and nutritional properties of strawberries. Berries were treated with HPPL and afterwards analyzed in terms of microbial contamination, shelf life extension, antioxidant capacity, firmness, total phenolic, total anthocyanin and ascorbic acid content, and colour. Results indicate that the decontamination of strawberries by HPPL was significant compared to control. Naturally distributed mesophilic bacteria on the surface of strawberries were inactivated by 2.2 log, and inoculated Bacillus cereus and Listeria monocytogenes were inactivated by 1.5 and 1.1 log, respectively. Yeasts/microfungi distributed on the surface of strawberries were inactivated by 1 log. The shelf life of treated strawberries was extended by 2 days. The increase of temperature on the surface of fruit never exceeded 42 °C. No significantly important differences were observed in total phenolic, total anthocyanin and ascorbic acid content, and antioxidant capacity of strawberry fruits before and after pulsed light treatment. Moreover, no impact on the strawberry colour or firmness was found after HPPL treatment. In conclusion, HPPL is fast, effective, non-thermal and environmentally friendly technique which can be applied for microbial control of strawberries.

  16. Early-life residential exposure to soil components in rural areas and childhood respiratory health and allergy.

    Science.gov (United States)

    Devereux, Graham; Tagiyeva, Nara; Turner, Stephen W; Ayres, Jon G; Seaton, Anthony; Hudson, Gordon; Hough, Rupert L; Campbell, Colin D; Shand, Charles A

    2014-01-01

    The increase in asthma and allergies has been attributed to declining exposure to environmental microorganisms. The main source of these is soil, the composition of which varies geographically and which is a major component (40-45%) of household dust. Our hypothesis-generating study aimed to investigate associations between soil components, respiratory health and allergy in a Scottish birth cohort. The cohort was recruited in utero in 1997/8, and followed up at one, two and five years for the development of wheezing, asthma and eczema. Lung function, exhaled nitric oxide and allergic sensitization were measured at age five in a subset. The Scottish Soils Database held at The James Hutton Institute was linked to the birth cohort data by the residential postcode at birth and five years. The soil database contained information on size separates, organic matter concentration, pH and a range of inorganic elements. Soil and clinical outcome data were available for 869, 790 and 727 children at one, two and five years. Three hundred and fifty nine (35%) of children had the same address at birth and five years. No associations were found between childhood outcomes and soil content in the residential area at age five. The soil silt content (2-20 μm particle size) of the residential area at birth was associated with childhood wheeze (adjusted OR 1.20, 95% CI [1.05; 1.37]), wheeze without a cold (1.41 [1.18; 1.69]), doctor-diagnosed asthma (1.54 [1.04; 2.28]), lung function (FEV1: beta -0.025 [-0.047;-0.001]) and airway inflammation (FENO: beta 0.15 [0.03; 0.27]) at age five, but not with allergic status or eczema. Whilst residual confounding is the most likely explanation for the associations reported, the results of this study lead us to hypothesise that early life exposure to residential soil silt may adversely influence childhood respiratory health, possibly because of the organic components of silt. © 2013 Elsevier B.V. All rights reserved.

  17. Whither Educational Evaluation: Life, Death, and Reincarnation? Research into Practice Project.

    Science.gov (United States)

    Herman, Joan; And Others

    1984-01-01

    The current health and future well-being of educational evaluation is considered in terms of financial support, official mandate, evaluators' status, evaluation prevalence, and evaluation utility in these seven symposium papers. "Educational Evaluation--Indicators of Life, Death, or Reincarnation," by Susan Klein, assesses recent federal…

  18. Impact evaluation of rolling contact fatigue life models

    International Nuclear Information System (INIS)

    Choi, Young Sik; Yang, Xiaoping

    2012-01-01

    Since the accurate prediction of fatigue life has a significant value, many researchers have attempted to develop a reliable fatigue life model. Recently, rolling contact fatigue life models incorporating machining impact were developed. These models have contributed to a significant improvement in prediction accuracy as compared with earlier models, thus representing a major step forward in the modeling effort. This paper compares the prediction accuracy of these models with that of the prediction method in International Standards. When α is set to 0.25, the observed improvement of prediction accuracy as measured by variance of prediction errors due to these models over that due to prediction method in International Standards is statistically significant. Impact analyses of such improvement are conducted to illustrate its value. It is further noted that while difference was observed between the variance of prediction errors due to the crack initiation life model based on a dislocation model and that due to the crack initiation life model based on a local stress-life curve, the observed difference is not statistically significant

  19. A Principal Component Analysis/Fuzzy Comprehensive Evaluation for Rockburst Potential in Kimberlite

    Science.gov (United States)

    Pu, Yuanyuan; Apel, Derek; Xu, Huawei

    2018-02-01

    Kimberlite is an igneous rock which sometimes bears diamonds. Most of the diamonds mined in the world today are found in kimberlite ores. Burst potential in kimberlite has not been investigated, because kimberlite is mostly mined using open-pit mining, which poses very little threat of rock bursting. However, as the mining depth keeps increasing, the mines convert to underground mining methods, which can pose a threat of rock bursting in kimberlite. This paper focuses on the burst potential of kimberlite at a diamond mine in northern Canada. A combined model with the methods of principal component analysis (PCA) and fuzzy comprehensive evaluation (FCE) is developed to process data from 12 different locations in kimberlite pipes. Based on calculated 12 fuzzy evaluation vectors, 8 locations show a moderate burst potential, 2 locations show no burst potential, and 2 locations show strong and violent burst potential, respectively. Using statistical principles, a Mahalanobis distance is adopted to build a comprehensive fuzzy evaluation vector for the whole mine and the final evaluation for burst potential is moderate, which is verified by a practical rockbursting situation at mine site.

  20. Statistically based evaluation of toughness properties of components in older nuclear power stations

    International Nuclear Information System (INIS)

    Aurich, D.; Jaenicke, B.; Veith, H.

    1996-01-01

    The KTA code 3201.2 contains provisions for the evaluation of K Ic values measured in components, but there are no instructions on how to proceed. According to the present state of the art in science and technology, fracture toughness values K Ic (T) should be evaluated statistically in order to specify the relationship to the loading values K I (T). The 'Master Curve' concept of Wallin yields too flat a curve shape at high temperatures. The statistical evaluation of K Ic values can also be carried out with the KTA-K Ic reference temperature function assuming a normal distribution of the measuring values. The KTA-K Ic reference temperature curve approximately corresponds to a fracture probability of 5 % when the KTA-K Ic reference temperature function is used for the statistical evaluation of the test results. Conclusions for the assessment of the safe distances can be drawn from the steeper shape of the KTA-K Ic reference temperature function in comparison to the 'Master Curve'. (orig.) [de

  1. Using the Cluster Analysis and the Principal Component Analysis in Evaluating the Quality of a Destination

    Directory of Open Access Journals (Sweden)

    Ida Vajčnerová

    2016-01-01

    Full Text Available The objective of the paper is to explore possibilities of evaluating the quality of a tourist destination by means of the principal components analysis (PCA and the cluster analysis. In the paper both types of analysis are compared on the basis of the results they provide. The aim is to identify advantage and limits of both methods and provide methodological suggestion for their further use in the tourism research. The analyses is based on the primary data from the customers’ satisfaction survey with the key quality factors of a destination. As output of the two statistical methods is creation of groups or cluster of quality factors that are similar in terms of respondents’ evaluations, in order to facilitate the evaluation of the quality of tourist destinations. Results shows the possibility to use both tested methods. The paper is elaborated in the frame of wider research project aimed to develop a methodology for the quality evaluation of tourist destinations, especially in the context of customer satisfaction and loyalty.

  2. Evaluation of resilient abutment components on measured strain using dynamic loading conditions.

    Science.gov (United States)

    Morton, D; Stanford, C M; Aquilino, S A

    1998-07-01

    Factors that affect transmission of strain from prostheses to bone may affect the long-term success of loaded implants. Current in vitro models are theoretically predictive (finite element modeling) or facsimile (photoelastic) in nature. A more clinically relevant in vitro model for strain evaluation should be investigated. This study attempted: (1) to validate a human cadaver bone model for vitro measurement of cortical bone strain, and (2) to evaluate the effect on cortical strain measurements of a resilient plastic component incorporated within a titanium implant in response to variable dynamic loading. Two IMZ (Interpore International) abutment alternatives were used: the titanium Abutment Complete and the polyoxymethylene Intra-mobile Element. The model system consisted of two implants placed in unfixed human cadaver ulna bone to simulate an implant bound edentulous region. Four biaxial rosette strain gauges simultaneously recorded cortical bone strain immediately mesial and distal to each implant. During experimentation a simulated prosthetic framework supported by either titanium or polyoxymethylene abutments was dynamically loaded 6 min from the terminal abutment along a cantilever extension. Cyclic nominal peak loads were applied with a materials testing machine at 20-N intervals from 20 to 200 N at a crosshead speed of 5 mm/minute. The protocol allowed frequency of load application to vary. A Newtonian linear correlation (r2 > or = 0.98) between load application and strain output was determined for each gauge position except for the terminal gauge located opposite the cantilever. Cortical strains recorded were within reported physiologic ranges involved in bone modeling and remodeling. Further, the polyoxymethylene abutment components did not result in reduction of peak microstrain at any gauge position. The Intra-mobile Element abutments, however, did increase the time required to complete 10 loading cycles when compared with the titanium Abutment

  3. SecondLife as an Evaluation Platform for Multiagent Systems Featuring Social Interactions

    DEFF Research Database (Denmark)

    Rehm, Matthias; Rosina, Peter

    2008-01-01

    In this paper we propose to use SecondLife as an evaluation environment for multiagent systems that model social group dynamics and social interactions. To this end we developed a control interface for NPCs in SecondLife that allows for running supervised or unsupervised long-term evaluations. Thus...

  4. Statistical properties of material strength for reliability evaluation of components of fast reactors. Austenitic stainless steels

    International Nuclear Information System (INIS)

    Takaya, Shigeru; Sasaki, Naoto; Tomobe, Masato

    2015-03-01

    Many efforts have been made to implement the System Based Code concept of which objective is to optimize margins dispersed in several codes and standards. Failure probability is expected to be a promising quantitative index for optimization of margins, and statistical information for random variables is needed to evaluate failure probability. Material strength like tensile strength is an important random variable, but the statistical information has not been provided enough yet. In this report, statistical properties of material strength such as creep rupture time, steady creep strain rate, yield stress, tensile stress, flow stress, fatigue life and cyclic stress-strain curve, were estimated for SUS304 and 316FR steel, which are typical structural materials for fast reactors. Other austenitic stainless steels like SUS316 were also used for statistical estimation of some material properties such as fatigue life. These materials are registered in the JSME code of design and construction of fast reactors, so test data used for developing the code were used as much as possible in this report. (author)

  5. A probability evaluation method of early deterioration condition for the critical components of wind turbine generator systems

    DEFF Research Database (Denmark)

    Hu, Y.; Li, H.; Liao, X

    2016-01-01

    method of early deterioration condition for critical components based only on temperature characteristic parameters. First, the dynamic threshold of deterioration degree function was proposed by analyzing the operational data between temperature and rotor speed. Second, a probability evaluation method...... of early deterioration condition was presented. Finally, two cases showed the validity of the proposed probability evaluation method in detecting early deterioration condition and in tracking their further deterioration for the critical components.......This study determines the early deterioration condition of critical components for a wind turbine generator system (WTGS). Due to the uncertainty nature of the fluctuation and intermittence of wind, early deterioration condition evaluation poses a challenge to the traditional vibration...

  6. Some technological aspects of an evaluation and visualisation component for the safeguards integrated information system

    International Nuclear Information System (INIS)

    Belenki, A.; Nishiwaki, Y.; Matsuoka, H.; Fedoseeva, I.

    2001-01-01

    According to Safeguards strengthening measures which include both Measures under Comprehensive Safeguards Agreements and Measures under Model Additional Protocol, the Agency receives much more information than some years before. It seems reasonable to develop an integrated information system (IIS) because information evaluation and review are important parts of Safeguards assessments. An integrated information system can include the following components: information search, primary messages selection, evaluation of received information, data storage, visualisation and evaluation of State's nuclear programme (SNP) and elaboration of management decisions. Hereby, IIS is a human-computer system where all components listed above are implemented. Within the framework of SNP a human factor plays an important role. SNP has a number of special properties such as uniqueness, multi-dimensions, subjectivity of its state evaluation, time variation, incompleteness of its description and the mentioned above human factor. For realistic simulation of SNP development it is necessary to reduce usage of quantitative methods and apply methods which are closer to perception of the outward things by a human being. This task requires to convert all available information, both qualitative and quantitative, into a special format. The format requires methods which are being developed on the basis of pragmatic, visual and Zadeh's linguistic variables which define corresponding scales. A pragmatic scale is defined on a basic metric scale taking into account a particular pragmatic cut of SNP. In other words pragmatic scale maps a pragmatic cut of the problem which is important from the point of view of IIS goal. By using pragmatic scales it is possible, for example, to estimate the speed of development of processes existing within the framework of SNP. The visual variable allows to solve the following engineering tasks: input of the expert's evaluations in the system and interpretations of its

  7. Evaluation of quality of life, physical, and mental aspects in longevous patients with chronic kidney disease.

    Science.gov (United States)

    Martini, Adriana; Ammirati, Adriano; Garcia, Carlos; Andrade, Carolina; Portela, Odete; Cendoroglo, Maysa S; Sesso, Ricardo

    2018-04-01

    The diagnosis of chronic kidney disease (CKD) in elderly individuals has been increasing. The objective of this study was to evaluate physical, mental and social aspects in longevous elderly patients with CKD. Eighty patients with CKD (stage 4 and 5, not on dialysis) and 60 longevous elderly (≥ 80 years) paired by gender and age living in the community were evaluated. Physical, cognitive, social and quality of life aspects were analyzed according to the following scales: Charlson comorbidity index, Medical Outcomes Study Short Form 36-Item (SF-36), Medical Outcomes Study, Boston Naming Test, verbal fluency test (animal naming), sit-to-stand test, gait speed, and the Mini-Mental state examination. Compared to the control group, the CKD group had a higher mean in the comorbidities index (3.5 ± 1.2 vs. 1.0 ± 1, respectively, p < 0.001). In the multivariate analysis, the CKD group presented worse performance in the SF-36 dimensions: 'physical functioning,' 'general health,' 'emotional functioning,' 'vitality,' and physical component summary. On the other hand, they presented better results for the 'mental health' dimension, in addition to lower  social support, worse verbal fluency and worse results on the sit-to-stand test. Longevous patients with stage 4 or 5 CKD presented worse evaluation in several domains of physical and emotional functioning, lower social support and evidence of worse cognitive performance. These aspects should be taken into account in order to improve the care provided to these patients, improve their quality of life and prevent their morbidity.

  8. Evaluation of the Introduction of an e-Health Skills Component for Dietetics Students.

    Science.gov (United States)

    Rollo, Megan E; Collins, Clare E; MacDonald-Wicks, Lesley

    2017-11-01

    Appropriate and effective use of technology within practice is a key competency outlined in Australian dietetics training standards. An e-health skills component (lecture and workshop) was introduced to undergraduate students enrolled in an Australian nutrition and dietetics program. The lecture orientated students to key e-health terms and concepts relating to telehealth and m-health technologies, while the workshop provided an opportunity to apply knowledge. The workshop consisted of four stations with activities relating to (1) orientation to telehealth equipment; (2) comparison of dietetic consultation components completed in person versus remotely via video call; (3) quality assessment of mobile apps; and (4) exploration of advantages and disadvantages, and the ethical, security, and privacy issues relating to use of e-health technologies in dietetic practice. Student experience of the training was evaluated via questionnaire. Forty-five students (62.2% aged ≤19-24 years, 86.7% female) completed the survey. Following the workshop, the level of understanding relating to each key e-health concept improved significantly (p education to support the use of e-health technologies within dietetic practice were rated a high level of importance by most students (78-80%). The majority of students (93.3% to 97.8%) reported a positive experience at each of the four workshop stations, with "informative" the most common word selected to rate each station (37.8% to 44.4% of students across the four stations). The introduction of an e-health skills component resulted in an improved understanding of concepts for using these technologies. These findings provide preliminary support for integration of further e-health training within the dietetics program.

  9. Evaluation and development of measurement components for a catalytic converter test system

    Energy Technology Data Exchange (ETDEWEB)

    Chan, A.K.

    1997-08-01

    The purpose of this research and development project was to evaluate and configure the components of a test system designed for the analysis of full-scale vehicle-aged automobile catalytic converters. The components tested included an exhaust gas analyzer for measuring hydrocarbon, CO, CO{sub 2} and O{sub 2} contents and a chemiluminescence detector (CLD) for measuring NO{sub x}, as well as thermocouples and pressure meters. A software package (TestPoint vers.2.Ob, Capital Equipment) was used to develop a computer-based data sampling and acquisition interface with the components and sensors connected to the test system. Tests of the Sun MGA-1200, a non-dispersive infrared (NDIR) analyzer, with CO, CO{sub 2} and various hydrocarbons (propane and octane) revealed sensitivity to large pressure changes (greater than 500 mbar). There was no significant cross-sensitivity between the gases except for the slight response of the hydrocarbon (HC) register to water vapor and CO. However, the low range of HC(5-30 vppm) expected in car exhaust after the converter means any cross-sensitivity could have an effect on the measurement, depending on measurement conditions. Tests of the EcoPhysics CLD 700 NO{sub x} meter also indicated sensitivity to pressure. An executable TestPoint run-time application was created to allow near real-time monitoring of the test system using a desktop computer. Nine channels of analog data are fed to a desktop computer via an A/D board and seven exhaust gas parameters through an RS-232C interface with the MGA-1200 23 refs, 32 figs, 10 tabs. Examination paper

  10. Evaluation of acne quality of life, loneliness and life satisfaction levels in adolescents with acne vulgaris

    Directory of Open Access Journals (Sweden)

    İjlal Erturan

    2014-12-01

    Full Text Available Background and Design: Acne vulgaris is a dermatological disorder mainly seen in adolescents. Psychiatric morbidity has been reported in these patients. The aim of the present study was to investigate the quality of life, loneliness and life satisfaction levels in adolescents with acne vulgaris. Materials and Methods: A total of 264 adolescents with acne and 250 controls were included in the study. Acne severity was determined by the Global Acne Grading System (GAGS. Acne Quality of Life Scale (AQOL; developed by Gupta et al., UCLA Loneliness scale (ULS; developed by Russell, Peplau & Ferguson (1978, and the Life Satisfaction Scale (LSS; developed by Diener et al. were used to asses life quality, loneliness and life satisfaction levels, respectively in adolescents with acne and in controls. Results: The mean AQOL and the mean ULS scores were significantly higher in patients (13.67±4.75 vs 11.14±2.94, p<0.001 and 32.15±8.46 vs 30.52±8.70,p=0.031, respectively. The mean LSS score was significantly lower in acne patients (21.82±6.40 than in controls (23.04±6.45, p=0.033. There was a statistically significant difference in the mean LSS scores between the mild, moderate and severe acne patients (22.15±6.32, 21.61±6.20, 16.00±7.26, respectively; Kruskal Wallis Test p=0.036. While there was no significant difference in the mean ULS and LSS scores between the genders. The mean ALQI score was significantly higher in males than in females (p=0.004. Conclusion: Our results indicated that acne quality of life and life satisfaction levels were significantly reduced while loneliness levels were significantly increased in adolescents with acne compared to controls. Our study is important in terms of being the first study investigating the loneliness and life satisfaction levels in acne patients and the relationship between these parameters and severity of acne.

  11. [Quality evaluation of rhubarb dispensing granules based on multi-component simultaneous quantitative analysis and bioassay].

    Science.gov (United States)

    Tan, Peng; Zhang, Hai-Zhu; Zhang, Ding-Kun; Wu, Shan-Na; Niu, Ming; Wang, Jia-Bo; Xiao, Xiao-He

    2017-07-01

    This study attempts to evaluate the quality of Chinese formula granules by combined use of multi-component simultaneous quantitative analysis and bioassay. The rhubarb dispensing granules were used as the model drug for demonstrative study. The ultra-high performance liquid chromatography (UPLC) method was adopted for simultaneously quantitative determination of the 10 anthraquinone derivatives (such as aloe emodin-8-O-β-D-glucoside) in rhubarb dispensing granules; purgative biopotency of different batches of rhubarb dispensing granules was determined based on compound diphenoxylate tablets-induced mouse constipation model; blood activating biopotency of different batches of rhubarb dispensing granules was determined based on in vitro rat antiplatelet aggregation model; SPSS 22.0 statistical software was used for correlation analysis between 10 anthraquinone derivatives and purgative biopotency, blood activating biopotency. The results of multi-components simultaneous quantitative analysisshowed that there was a great difference in chemical characterizationand certain differences inpurgative biopotency and blood activating biopotency among 10 batches of rhubarb dispensing granules. The correlation analysis showed that the intensity of purgative biopotency was significantly correlated with the content of conjugated anthraquinone glycosides (Panalysis and bioassay can achieve objective quantification and more comprehensive reflection on overall quality difference among different batches of rhubarb dispensing granules. Copyright© by the Chinese Pharmaceutical Association.

  12. Evaluation of phyllosilicates as a buffer component in the disposal of nuclear fuel waste

    International Nuclear Information System (INIS)

    Oscarson, D.W.; Cheung, S.C.H.

    1983-12-01

    The disposal concept now being assessed in the Canadian Nuclear Fuel Waste Management program entails the emplacement of containers with used fuel or fuel recycle waste deep in a stable plutonic formation, possibly in the Canadian Shield. One of the engineered barriers to radionuclide movement from the waste containers to the biosphere is a buffer material placed between the containers and the surrounding rock mass. An effective buffer material should have a combination of the following properties: low hydraulic conductivity and diffusivity for water and dissolved chemical species, a high sorption capacity for radionuclides, high thermal conductivity, sufficient physical strength to support the waste containers, and long-term stability under the conditions existing in a disposal vault. This report evaluates phyllosilicates for their effectiveness as potential buffer components. It concludes that bentonite, because of its high swelling potential, low hydraulic conductivity, low effective porosity, and high sorption capacity for many radionuclides, would be the most effective phyllosilicate for use as a buffer component

  13. Critical components of odors in evaluating the performance of food waste composting plants

    International Nuclear Information System (INIS)

    Mao, I-F.; Tsai, C.-J.; Shen, S.-H.; Lin, T.-F.; Chen, W.-K.; Chen, M.-L.

    2006-01-01

    The current Taiwan government policy toward food waste management encourages composting for resource recovery. This study used olfactometry, gas chromatography-mass spectrometry (GC-MS) and gas detector tubes to evaluate the ambient air at three of the largest food waste composting plants in Taiwan. Ambient air inside the plants, at exhaust outlets and plant boundaries was examined to determine the comprehensive odor performance, critical components, and odor elimination efficiencies of various odor control engineering. Analytical results identified 29 compounds, including ammonia, amines, acetic acid, and multiple volatile organic compounds (VOCs) (hydrocarbons, ketones, esters, terpenes and S-compounds) in the odor from food waste composting plants. Concentrations of six components - ammonia, amines, dimethyl sulfide, acetic acid, ethyl benzene and p-Cymene - exceeded human olfactory thresholds. Ammonia, amines, dimethyl sulfide and acetic acid accounted for most odors compared to numerous VOCs. The results also show that the biotrickling filter was better at eliminating the concentrations of odor, NH 3 , amines, S-compounds and VOCs than the chemical scrubber and biofilters. All levels measured by olfactometry at the boundaries of food waste composting plants (range, 74-115 Odor Concentration (OC)) exceeded Taiwan's EPA standard of 50 OC. This study indicated that the malodor problem continued to be a significant problem for food waste recovery

  14. A method for evaluating the funding of components of natural resource and conservation projects

    Energy Technology Data Exchange (ETDEWEB)

    Wellington, John F., E-mail: welling@ipfw.edu [Indiana University – Purdue University Fort Wayne (IPFW), Doermer School of Business, 203 Stonegate Drive Erie, PA 16505 (United States); Lewis, Stephen A., E-mail: lewis.sa07@gmail.com [Mongrel Works, LLC., Columbus, OH 43209 (United States)

    2016-02-15

    Many public and private entities such as government agencies and private foundations have missions related to the improvement, protection, and sustainability of the environment. In pursuit of their missions, they fund projects with related outcomes. Typically, the funding scene consists of scarce funding dollars for the many project requests. In light of funding limitations and funder's search for innovative funding schemes, a method to support the allocation of scarce dollars among project components is presented. The proposed scheme has similarities to methods in the project selection literature but differs in its focus on project components and its connection to and enumeration of the universe of funding possibilities. The value of having access to the universe is demonstrated with illustrations. The presentation includes Excel implementations that should appeal to a broad spectrum of project evaluators and reviewers. Access to the space of funding possibilities facilitates a rich analysis of funding alternatives. - Highlights: • Method is given for allocating scarce funding dollars among competing projects. • Allocations are made to fund parts of projects • Proposed method provides access to the universe of funding possibilities. • Proposed method facilitates a rich analysis of funding possibilities. • Excel spreadsheet implementations are provided.

  15. Critical components of odors in evaluating the performance of food waste composting plants

    Energy Technology Data Exchange (ETDEWEB)

    Mao, I-F. [Institute of Environmental Health Sciences, National Yang-Ming University, No. 155, Sec.2, Li-Nong St., Beitou, Taipei, Taiwan (China)]. E-mail: ifmao@ym.edu.tw; Tsai, C.-J. [Institute of Environmental Health Sciences, National Yang-Ming University, No. 155, Sec.2, Li-Nong St., Beitou, Taipei, Taiwan (China); Shen, S.-H. [Department of Environment Management, Jin Wen Institute of Technology, No. 99, An-Chung Rd., Hsin-Tien City, Taipei, Taiwan (China); Lin, T.-F. [Institute of Environmental Engineering, National Cheng Kung University, No. 1, Ta-Hsueh Rd., Tainan, Taiwan (China); Chen, W.-K. [Department of Environment Management, Jin Wen Institute of Technology, No. 99, An-Chung Rd., Hsin-Tien City, Taipei, Taiwan (China); Chen, M.-L. [Institute of Environmental Health Sciences, National Yang-Ming University, No. 155, Sec.2, Li-Nong St., Beitou, Taipei, Taiwan (China)]. E-mail: mlchen@ym.edu.tw

    2006-11-01

    The current Taiwan government policy toward food waste management encourages composting for resource recovery. This study used olfactometry, gas chromatography-mass spectrometry (GC-MS) and gas detector tubes to evaluate the ambient air at three of the largest food waste composting plants in Taiwan. Ambient air inside the plants, at exhaust outlets and plant boundaries was examined to determine the comprehensive odor performance, critical components, and odor elimination efficiencies of various odor control engineering. Analytical results identified 29 compounds, including ammonia, amines, acetic acid, and multiple volatile organic compounds (VOCs) (hydrocarbons, ketones, esters, terpenes and S-compounds) in the odor from food waste composting plants. Concentrations of six components - ammonia, amines, dimethyl sulfide, acetic acid, ethyl benzene and p-Cymene - exceeded human olfactory thresholds. Ammonia, amines, dimethyl sulfide and acetic acid accounted for most odors compared to numerous VOCs. The results also show that the biotrickling filter was better at eliminating the concentrations of odor, NH{sub 3}, amines, S-compounds and VOCs than the chemical scrubber and biofilters. All levels measured by olfactometry at the boundaries of food waste composting plants (range, 74-115 Odor Concentration (OC)) exceeded Taiwan's EPA standard of 50 OC. This study indicated that the malodor problem continued to be a significant problem for food waste recovery.

  16. Laser Safety Evaluation of the MILES and Mini MILES Laser Emitting Components; TOPICAL

    International Nuclear Information System (INIS)

    AUGUSTONI, ARNOLD L.

    2002-01-01

    Laser safety evaluation and output emission measurements were performed (during October and November 2001) on SNL MILES and Mini MILES laser emitting components. The purpose, to verify that these components, not only meet the Class 1 (eye safe) laser hazard criteria of the CDRH Compliance Guide for Laser Products and 21 CFR 1040 Laser Product Performance Standard; but also meet the more stringent ANSI Std. z136.1-2000 Safe Use of Lasers conditions for Class 1 lasers that govern SNL laser operations. The results of these measurements confirmed that all of the Small Arms Laser Transmitters, as currently set (''as is''), meet the Class 1 criteria. Several of the Mini MILES Small Arms Transmitters did not. These were modified and re-tested and now meet the Class 1 laser hazard criteria. All but one System Controllers (hand held and rifle stock) met class 1 criteria for single trigger pulls and all presented Class 3a laser hazard levels if the trigger is held (continuous emission) for more than 5 seconds on a single point target. All units were Class 3a for ''aided'' viewing. These units were modified and re-tested and now meet the Class 1 hazard criteria for both ''aided'' as well as ''unaided'' viewing. All the Claymore Mine laser emitters tested are laser hazard Class 1 for both ''aided'' as well as ''unaided'' viewing

  17. A method for evaluating the funding of components of natural resource and conservation projects

    International Nuclear Information System (INIS)

    Wellington, John F.; Lewis, Stephen A.

    2016-01-01

    Many public and private entities such as government agencies and private foundations have missions related to the improvement, protection, and sustainability of the environment. In pursuit of their missions, they fund projects with related outcomes. Typically, the funding scene consists of scarce funding dollars for the many project requests. In light of funding limitations and funder's search for innovative funding schemes, a method to support the allocation of scarce dollars among project components is presented. The proposed scheme has similarities to methods in the project selection literature but differs in its focus on project components and its connection to and enumeration of the universe of funding possibilities. The value of having access to the universe is demonstrated with illustrations. The presentation includes Excel implementations that should appeal to a broad spectrum of project evaluators and reviewers. Access to the space of funding possibilities facilitates a rich analysis of funding alternatives. - Highlights: • Method is given for allocating scarce funding dollars among competing projects. • Allocations are made to fund parts of projects • Proposed method provides access to the universe of funding possibilities. • Proposed method facilitates a rich analysis of funding possibilities. • Excel spreadsheet implementations are provided

  18. Post annealing performance evaluation of printable interdigital capacitive sensors by principal component analysis

    KAUST Repository

    Zia, Asif Iqbal

    2015-06-01

    The surface roughness of thin-film gold electrodes induces instability in impedance spectroscopy measurements of capacitive interdigital printable sensors. Post-fabrication thermodynamic annealing was carried out at temperatures ranging from 30 °C to 210 °C in a vacuum oven and the variation in surface morphology of thin-film gold electrodes was observed by scanning electron microscopy. Impedance spectra obtained at different temperatures were translated into equivalent circuit models by applying complex nonlinear least square curve-fitting algorithm. Principal component analysis was applied to deduce the classification of the parameters affected due to the annealing process and to evaluate the performance stability using mathematical model. Physics of the thermodynamic annealing was discussed based on the surface activation energies. The post anneal testing of the sensors validated the achieved stability in impedance measurement. © 2001-2012 IEEE.

  19. Characterization of starch and other components from African crops and quality evaluation of derived products

    International Nuclear Information System (INIS)

    Quattrucci, E.; Acquistucci, R.; Carcea, M.; Cubadda, R.

    1997-01-01

    Research was carried out on African staple foods on characterization of components of cereals and tubers, and quality evaluation of foods manufactured from composite flours. Cereal starch, alimentary fiber and minerals from cassava were investigated. Starch was isolated under conditions of minimum damage from seeds of three sorghum and two fonio cultivars, and its physico-chemical properties were compared with commercial wheat starch. Fiber, ash and mineral content of samples of genetically improved varieties of cassava from Ghana were determined to understand the role of factors that influence texture of cooked products. Bread and pasta were produced from either triticale alone or in combination with different amounts of cassava flour, and by varying the amount of wheat flour. The organoleptic quality of the raw materials and final products were determined. (author). 15 refs, 10 tabs

  20. Evaluations of the criterion for lateral expansion of steels for nuclear components

    International Nuclear Information System (INIS)

    Susukida, H.; Satoh, M.; Fukuhara, A.

    1980-01-01

    The Charpy V notch impact tests were performed on Japanese made ferritic steels for nuclear components and their lateral expansions were investigated. The correlations of lateral expansion and absorbed energy with yield strength, and the correlation between lateral expansion and fracture toughness were also studied. The correlation at each lateral expansion level between absorbed energy and yield strength almost agreed with that published by the US PVRC. It was confirmed that lateral expansion could be used as a criterion for the toughness of the steels corresponding to changes in their yield strength, and that the lateral expansion criterion adopted in the ASME Code Section III was appropriate. Further, the correlation between fracture toughness and lateral expansion and that between fracture toughness and absorbed energy, were evaluated, and respective equations of correlation were proposed. (author)

  1. An Assessment of Nondestructive Evaluation Capability for Complex Additive Manufacturing Aerospace Components

    Science.gov (United States)

    Walker, James; Beshears, Ron; Lambert, Dennis; Tilson, William

    2016-01-01

    The primary focus of this work is to investigate some of the fundamental relationships between processing, mechanical testing, materials characterization, and NDE for additively manufactured (AM) components using the powder bed fusion direct melt laser sintered process. The goal is to understand the criticality of defects unique to the AM process and then how conventional nondestructive evaluation methods as well as some of the more non-traditional methods such as computed tomography, are effected by the AM material. Specific defects including cracking, porosity and partially/unfused powder will be addressed. Besides line-of-site NDE, as appropriate these inspection capabilities will be put into the context of complex AM geometries where hidden features obscure, or inhibit traditional NDE methods.

  2. Reactor Safety Gap Evaluation of Accident Tolerant Components and Severe Accident Analysis

    International Nuclear Information System (INIS)

    Farmer, Mitchell T.; Bunt, R.; Corradini, M.; Ellison, Paul B.; Francis, M.; Gabor, John D.; Gauntt, R.; Henry, C.; Linthicum, R.; Luangdilok, W.; Lutz, R.; Paik, C.; Plys, M.; Rabiti, Cristian; Rempe, J.; Robb, K.; Wachowiak, R.

    2015-01-01

    The overall objective of this study was to conduct a technology gap evaluation on accident tolerant components and severe accident analysis methodologies with the goal of identifying any data and/or knowledge gaps that may exist, given the current state of light water reactor (LWR) severe accident research, and additionally augmented by insights obtained from the Fukushima accident. The ultimate benefit of this activity is that the results can be used to refine the Department of Energy's (DOE) Reactor Safety Technology (RST) research and development (R&D) program plan to address key knowledge gaps in severe accident phenomena and analyses that affect reactor safety and that are not currently being addressed by the industry or the Nuclear Regulatory Commission (NRC).

  3. The COD concept and its application to fracture mechanical evaluation of cracked components

    International Nuclear Information System (INIS)

    Kockelmann, H.

    1984-01-01

    Based on a comprehensive literature study, this report critically evaluates the current state of experiences with the COD concept in fracture mechanics. First the concept is explained and the procedure of materials testing with a view to fracture mechanics is discussed in detail with emphasis on: The definition of crack shape modification; the procedure to detect crack modification, with subsequent comparison; the determination of material characteristics; the impact on the characteristics of the crack tip opening and the dispersion of results. The correlation between crack tip opening characteristics and notch impact strength is explained, and the methods applied for analysis of the streses affecting the structural components are shown. The design-based and failure threshold curves and the treatment of real crack geometries are also discussed. Problems still to be solved are shown. (orig./HP) [de

  4. Characterization of starch and other components from African crops and quality evaluation of derived products

    Energy Technology Data Exchange (ETDEWEB)

    Quattrucci, E; Acquistucci, R; Carcea, M [National Insti. of Nutrion, Rome (Italy); Cubadda, R [University of Molise, Campobasso (Italy)

    1997-07-01

    Research was carried out on African staple foods on characterization of components of cereals and tubers, and quality evaluation of foods manufactured from composite flours. Cereal starch, alimentary fiber and minerals from cassava were investigated. Starch was isolated under conditions of minimum damage from seeds of three sorghum and two fonio cultivars, and its physico-chemical properties were compared with commercial wheat starch. Fiber, ash and mineral content of samples of genetically improved varieties of cassava from Ghana were determined to understand the role of factors that influence texture of cooked products. Bread and pasta were produced from either triticale alone or in combination with different amounts of cassava flour, and by varying the amount of wheat flour. The organoleptic quality of the raw materials and final products were determined. (author). 15 refs, 10 tabs.

  5. Reactor Safety Gap Evaluation of Accident Tolerant Components and Severe Accident Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Farmer, Mitchell T. [Argonne National Lab. (ANL), Argonne, IL (United States); Bunt, R. [Southern Nuclear, Atlanta, GA (United States); Corradini, M. [Univ. of Wisconsin, Madison, WI (United States); Ellison, Paul B. [GE Power and Water, Duluth, GA (United States); Francis, M. [Argonne National Lab. (ANL), Argonne, IL (United States); Gabor, John D. [Erin Engineering, Walnut Creek, CA (United States); Gauntt, R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Henry, C. [Fauske and Associates, Burr Ridge, IL (United States); Linthicum, R. [Exelon Corp., Chicago, IL (United States); Luangdilok, W. [Fauske and Associates, Burr Ridge, IL (United States); Lutz, R. [PWR Owners Group (PWROG); Paik, C. [Fauske and Associates, Burr Ridge, IL (United States); Plys, M. [Fauske and Associates, Burr Ridge, IL (United States); Rabiti, Cristian [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rempe, J. [Rempe and Associates LLC, Idaho Falls, ID (United States); Robb, K. [Argonne National Lab. (ANL), Argonne, IL (United States); Wachowiak, R. [Electric Power Research Inst. (EPRI), Knovville, TN (United States)

    2015-01-31

    The overall objective of this study was to conduct a technology gap evaluation on accident tolerant components and severe accident analysis methodologies with the goal of identifying any data and/or knowledge gaps that may exist, given the current state of light water reactor (LWR) severe accident research, and additionally augmented by insights obtained from the Fukushima accident. The ultimate benefit of this activity is that the results can be used to refine the Department of Energy’s (DOE) Reactor Safety Technology (RST) research and development (R&D) program plan to address key knowledge gaps in severe accident phenomena and analyses that affect reactor safety and that are not currently being addressed by the industry or the Nuclear Regulatory Commission (NRC).

  6. Post annealing performance evaluation of printable interdigital capacitive sensors by principal component analysis

    KAUST Repository

    Zia, Asif Iqbal; Mukhopadhyay, Subhas Chandra; Yu, Paklam; Al-Bahadly, Ibrahim H.; Gooneratne, Chinthaka Pasan; Kosel, Jü rgen

    2015-01-01

    The surface roughness of thin-film gold electrodes induces instability in impedance spectroscopy measurements of capacitive interdigital printable sensors. Post-fabrication thermodynamic annealing was carried out at temperatures ranging from 30 °C to 210 °C in a vacuum oven and the variation in surface morphology of thin-film gold electrodes was observed by scanning electron microscopy. Impedance spectra obtained at different temperatures were translated into equivalent circuit models by applying complex nonlinear least square curve-fitting algorithm. Principal component analysis was applied to deduce the classification of the parameters affected due to the annealing process and to evaluate the performance stability using mathematical model. Physics of the thermodynamic annealing was discussed based on the surface activation energies. The post anneal testing of the sensors validated the achieved stability in impedance measurement. © 2001-2012 IEEE.

  7. Evaluation of the quality of life and risk of suicide

    Directory of Open Access Journals (Sweden)

    Verônica de Medeiros Alves

    2016-03-01

    Full Text Available OBJECTIVE: To identify the socio-demographic profiles, suicidal ideation, the presence of mental disorders and the quality of life of patients using mental health services in Arapiraca, Alagoas, Brazil. METHOD: Interviews were conducted in family health units and the Psychosocial Attention Center. The sample included 202 mental disorder patients with a risk of suicide attempts, 207 mental disorder patients without a risk of suicide attempts and 196 controls. This study used an identification questionnaire, the abbreviated World Health Organization Quality of Life questionnaire, Beck‘s Suicidal Ideation Scale and the Mini International Neuropsychiatric Interview. RESULTS: Patients who had a mental disorder and a risk of suicide attempts tended to be single, had less education and lower family income, were not working and showed lower scores in quality of life domains; 73 of these patients had suicidal ideation in the previous week. Depressive disorders, manic episodes, hypomanic episodes, social phobias, obsessive compulsive disorder, post-traumatic stress disorder, psychotic syndromes and generalized anxiety disorder were more frequent and statistically significant for patients at risk for suicide attempts. CONCLUSION: The management of patients with a risk of suicide attempts must focus on individual patients because this risk is directly linked to changes in quality of life and the improvement of these patients’ prognosis.

  8. Evaluation of depression and quality of life in patients with ...

    African Journals Online (AJOL)

    Abstract. Background: Sleep fragmentation, repetitive hypoxemia during sleep, excessive sleepiness during the day, lack of concentration, memory loss, depression, decreased libido, and impotence are the characteristics of obstructive sleep apnea syndrome (OSAS) that may impair quality of life (QOL). This study aimed to ...

  9. Psychometric Evaluation of the Malay Satisfaction with Life Scale

    Science.gov (United States)

    Swami, Viren; Chamorro-Premuzic, Tomas

    2009-01-01

    The Satisfaction With Life Scale (SWLS) is one of the most widely used scales for the measurement of subjective well-being across the globe, but no satisfactory version exists for use among Malay-speaking populations. The present study reports on the translation of a new Malay SWLS and examines its psychometric properties in a community sample of…

  10. Evaluation of depression and quality of life in patients with ...

    African Journals Online (AJOL)

    2015-12-07

    Dec 7, 2015 ... positive correlation with the Epworth scale (t < 90% SaO2) (r = 0.285, ... Key words: Depression, obstructive sleep apnea, quality of life ... during sleep, which may contribute to sleep apnea. ... QOL is the combination of the physical, emotional, and ... symptoms, which in turn are related to treatment and.

  11. Postural stability in patients with knee osteoarthritis: comparison with controls and evaluation of relationships between postural stability scores and International Classification of Functioning, Disability and Health components.

    Science.gov (United States)

    Hsieh, Ru-Lan; Lee, Wen-Chung; Lo, Min-Tzu; Liao, Wei-Cheng

    2013-02-01

    To assess the differences in postural stability between patients with knee osteoarthritis and controls without knee osteoarthritis, and to evaluate possible relations between postural stability scores and International Classification of Functioning, Disability and Health (ICF) components. An age-matched, case-controlled trial with a cross-sectional design. A teaching hospital. Patients with knee osteoarthritis (n=73) and age-matched controls (n=60). Data on patients' postural stability and additional health-related variables were collected using various instruments. These included the Hospital Anxiety and Depression Scale, the Multidimensional Fatigue Inventory, the World Health Organization Quality of Life Brief Version, the physical function test (chair-rising time), the Chinese version of the Western Ontario and McMaster Universities Osteoarthritis Index, the Chinese version of the Knee Injury and Osteoarthritis Outcome Score, and the Biodex Stability System. A comparison of postural stability in patients with knee osteoarthritis versus that of controls was performed. The relation between postural stability scores for patients with knee osteoarthritis and ICF components was evaluated. Pearson correlation tests were used to determine the variables that correlated with postural stability among these patients. Patients with knee osteoarthritis displayed lower overall postural stability than controls (scores of 0.7 vs. 0.5, P=.006) and scored lower on the environmental domain of the World Health Organization Quality of Life Brief Version (62.2 vs 66.8, P=.014). For patients with knee osteoarthritis, postural stability was weakly associated with the ICF components of body functions and structures, including pain (r=.33-.34, P=.004), physical fatigue (r=.28, P=.016), and reduced motivation (r=.30, P=.011). Weak to moderate associations between postural stability and the ICF components of activities and participation were found; the relevant ICF variables included

  12. HPLC evaluation of the minor lipid components of by-products resulting from edible oil processing

    Directory of Open Access Journals (Sweden)

    EL-Shami, Safinaz Mohamed M.

    2006-12-01

    Full Text Available An analytical evaluation of some by-products resulting from edible oil refining processing steps has been carried out. By-product samples were taken from four different local refineries that apply chemical refining technology. Pretreatment of the representative samples of the by-products were done prior to analysis followed by chromatographic isolation and derivatization of the minor components, namely, free and acylated sterol (FS and AS as well as free and acylated sterylglycosides (FSG and ASG. However, tocopherols were directly determined in the pretreated samples. HPLC, using different detectors, was carried out for the determination of these minor components. Several authors have focused on the analysis of sterols and sterol esters, as well as tocopherols in the refining byproducts; however sterylglycosides, as biologically important components, have not been dealt with. This study throws light on the by – products enriched with certain minor components to be possibly utilized as sources for such components. Also, the role of the conditions of the refining steps followed in removing these valuable minor components from oils was discussed. It was found that soapstock samples contained various amounts of total tocopherols ranging from 80 to 230ppm; total FS and AS ranged from 240 to 4000 mg/100g while total FSG and ASG ranged from 1120 to 6375 mg/100g. In the case of deodorization distillate samples total tocopherols ranged from 960 to 7360ppm; total FS and AS ranged from 1020 to 4160 mg/100g and total FSG, ASG ranged from 395 to 880 mg/100g.El trabajo realiza una evaluación analítica de algunos subproductos resultantes del la refinación de aceites comestibles. Las muestras procedieron de 4 plantas que aplicaban refinación química. Después de un pretratamiento de las muestras estas se sometieron a un análisis cromatográfico para el aislamiento y derivatización de los siguientes componentes minoritarios: esteroles libres y

  13. Fatigue life evaluation of 42CrMo4 nitrided steel by local approach: Equivalent strain-life-time

    International Nuclear Information System (INIS)

    Terres, Mohamed Ali; Sidhom, Habib

    2012-01-01

    Highlights: → Ion nitriding treatment of 42CrMo4 steel improves their fatigue strength by 32% as compared with the untreated state. → This improvement is the result of the beneficial effects of the superficial work- hardening and of the stabilized compressive residual stress. → The notch region is found to be the fatigue crack nucleation site resulting from a stress concentration (Kt = 1.6). → The local equivalent strain-fatigue life method was found to be an interesting predictive fatigue life method for nitrided parts. -- Abstract: In this paper, the fatigue resistance of 42CrMo4 steel in his untreated and nitrided state was evaluated, using both experimental and numerical approaches. The experimental assessment was conducted using three points fatigue flexion tests on notched specimens at R = 0.1. Microstructure analysis, micro-Vickers hardness test, and scanning electron microscope observation were carried out for evaluating experiments. In results, the fatigue cracks of nitrided specimens were initiated at the surface. The fatigue life of nitrided specimens was prolonged compared to that of the untreated. The numerical method used in this study to predict the nucleation fatigue life was developed on the basis of a local approach, which took into account the applied stresses and stabilized residual stresses during the cyclic loading and the low cyclic fatigue characteristics. The propagation fatigue life was calculated using fracture mechanics concepts. It was found that the numerical results were well correlated with the experimental ones.

  14. International Space Station Bacteria Filter Element Service Life Evaluation

    Science.gov (United States)

    Perry, J. L.

    2005-01-01

    The International Space Station (ISS) uses high-efficiency particulate air filters to remove particulate matter from the cabin atmosphere. Known as bacteria filter elements (BFEs), there are 13 elements deployed on board the ISS's U.S. segment in the flight 4R assembly level. The preflight service life prediction of 1 yr for the BFEs is based upon engineering analysis of data collected during developmental testing that used a synthetic dust challenge. While this challenge is considered reasonable and conservative from a design perspective, an understanding of the actual filter loading is required to best manage the critical ISS program resources. Testing was conducted on BFEs returned from the ISS to refine the service life prediction. Results from this testing and implications to ISS resource management are provided.

  15. Evaluation of environmental samples containing heavy hydrocarbon components in environmental forensic investigations

    Energy Technology Data Exchange (ETDEWEB)

    Raia, J.C.; Blakley, C.R.; Fuex, A.N.; Villalanti, D.C.; Fahrenthold, P.D. [Triton Anal Corp, Houston, TX (United States)

    2004-03-01

    This article presents a procedure to evaluate and characterize environmental samples containing mixtures of hydrocarbons over a wide boiling range of materials that include fuels and other products used in commerce. The range of the method extends to the higher boiling and heavier molecular weight hydrocarbon products in the range of motor oil, bunker fuel, and heavier residue materials. The procedure uses the analytical laboratory technique of high-temperature simulated distillation along with mathematical regression of the analytical data to estimate the relative contribution of individual products in mixtures of hydrocarbons present in environmental samples. An analytical technique to determine hydrocarbon-type distributions by gas chromatography-mass spectrometry with nitric oxide ionization spectrometry evaluation is also presented. This type of analysis allows complex hydrocarbon mixtures to be classified by their chemical composition, or types of hydrocarbons that include paraffins, cycloparaffins, monoaromatics, and polycyclic aromatic hydrocarbons. Characteristic hydrocarbon patterns for example, in the relative distribution of polycyclic aromatic hydrocarbons are valuable for determining the potential origin of materials present in environmental samples. These methods provide quantitative data for hydrocarbon components in mixtures as a function of boiling range and 'hydrocarbon fingerprints' of the types of materials present. This information is valuable in assessing environmental impacts of hydrocarbons at contaminated sites and establishing the liabilities and cost allocations for responsible parties.

  16. Evaluation of alternative methods of simulating asymmetric bulk heating in fusion reactor blanket/shield components

    International Nuclear Information System (INIS)

    Deis, G.A.; Longhurst, G.R.; Miller, L.G.; Wadkins, R.P.; Wessol, D.E.

    1981-10-01

    As a part of Phase O, Test Program Element-II of the Office of Fusion Energy First Wall/Blanket/Shield Engineering Test Program, a study was conducted by EG and G Idaho, Inc., to identify, characterize, and recommend alternative approaches for simulating fusion bulk heating in blanket/shield components. This is the report on that effort. Since the usefulness of any simulation approach depends upon the particular experiment considered, classes of problem types (thermal-hydraulic, thermomechanical, etc.) and material types (structure, solid breeder, etc.) are developed. The evaluation of the various simulation approaches is performed for the various significant combinations of problem class and material class. The simulation approaches considered are discrete-source heating, direct resistance, electromagnetic induction, microwave heating, and nuclear heating. From the evaluations performed for each experiment type, discrete - source heating emerges as a good approach for bulk heating simulation in thermal - hydraulics experiments, and nuclear heating appears to be a good approach in experiments addressing thermomechanics and combined thermal-hydraulic/thermomechanics

  17. Life cycle assessment. Specific indicators for Italy in impact evaluation

    International Nuclear Information System (INIS)

    Masoni, P.

    1999-01-01

    After a brief recall and a short description of the LCA (life cycle assessment) methodology, the work is focused on the impact assessment step, discussing the state of the art and a critical identification of environmental indicators, of normalization and weighting principles for the different environmental categories specific for Italy. The application methodology to a case study concerning the production of butter by the Consorzio Granterre of Modena (Italy) is also described [it

  18. Tools for evaluating oral health and quality of life

    OpenAIRE

    Bettie, Nirmal F.; Ramachandiran, Hari; Anand, Vijay; Sathiamurthy, Anusha; Sekaran, Preethi

    2015-01-01

    The seven dimensions of quality of life are required for a healthy living. Any impairment or disability affects any one or more of these dimensions resulting in functional impairment or handicap, which indicates the presence of disease. The success of any oral treatment depends on how far the individual is relieved of his disease process. Relief of symptoms provides patient comfort and enable functional activities. This well-being is considered as a measure of oral health and reflects patient...

  19. The Mediator Roles of Life Satisfaction and Self-Esteem between the Affective Components of Psychological Well-Being and the Cognitive Symptoms of Problematic Internet Use

    Science.gov (United States)

    Senol-Durak, Emre; Durak, Mithat

    2011-01-01

    The factors associated with cognitions about problematic Internet use have been empirically tested in various studies. The aim of the present study was to examine the mediator roles of both life satisfaction and self-esteem between affective components of subjective well-being and cognitions about problematic Internet use. For this purpose, the…

  20. Half-life evaluations for 3H, 90Sr, and 90Y

    International Nuclear Information System (INIS)

    MacMahon, Desmond

    2006-01-01

    A recent paper has reviewed methods for the evaluation of discrepant sets of data and demonstrated the results of applying these methods to the published half-life data of 90 Sr and 137 Cs [MacMahon, T.D., Pearce, A., Harris, P., 2004. Convergence of techniques for the evaluation of discrepant data. Appl. Radiat. Isot. 60, 275-281]. The half-life data for 3 H has been subject to a comprehensive review and critical evaluation by Lucas and Unterweger [2000. Comprehensive review and critical evaluation of the half-life of tritium. J. Res. Natl. Inst. Stand. Technol. 105, 541-549]. The current paper reports the results of applying the various evaluation procedures of MacMahon et al. Convergence of techniques for the evaluation of discrepant data. Appl. Radiat. Isot. 60, 275-281] to the data of Lucas and Unterweger [Comprehensive review and critical evaluation of the half-life of tritium. J. Res. Natl. Inst. Stand. Technol. 105, 541-549], resulting in a recommended half-life of 4497(4) days. MacMahon et al. [Convergence of techniques for the evaluation of discrepant data. Appl. Radiat. Isot. 60, 275-281] highlighted problems in the evaluation of the discrepant half-life data of 90 Sr, in particular the worrying upward trend in the data, where the weighted mean of all the measurements increases, on average, by 35 days each time a new measurement result is added. The current paper reports on further analyses of these data. New measurements of the half-life of 90 Y have been reported by Kossert and Schrader [2004. Standardization by liquid scintillation counting and half-life measurements of 90 Y. Appl. Radiat. Isot. 60, 741]. This has prompted a new evaluation of all available published 90 Y half-life data. The data are fairly consistent, and a value of 64.063(16) h is recommended

  1. Life-Cycle Evaluation of Domestic Energy Systems

    Science.gov (United States)

    Bando, Shigeru; Hihara, Eiji

    Among the growing number of environmental issues, the global warming due to the increasing emission of greenhouse gases, such as carbon dioxide CO2, is the most serious one. In order to reduce CO2 emissions in energy use, it is necessary to reduce primary energy consumption, and to replace energy sources with alternatives that emit less CO2.One option of such ideas is to replace fossil gas for water heating with electricity generated by nuclear power, hydraulic power, and other methods with low CO2 emission. It is also important to use energy efficiently and to reduce waste heat. Co-generation system is one of the applications to be able to use waste heat from a generator as much as possible. The CO2 heat pump water heaters, the polymer electrolyte fuel cells, and the micro gas turbines have high potential for domestic energy systems. In the present study, the life-cycle cost, the life-cycle consumption of primary energy and the life-cycle emission of CO2 of these domestic energy systems are compare. The result shows that the CO2 heat pump water heaters have an ability to reduce CO2 emission by 10%, and the co-generation systems also have another ability to reduce primary energy consumption by 20%.

  2. Evaluating failure rate of fault-tolerant multistage interconnection networks using Weibull life distribution

    International Nuclear Information System (INIS)

    Bistouni, Fathollah; Jahanshahi, Mohsen

    2015-01-01

    Fault-tolerant multistage interconnection networks (MINs) play a vital role in the performance of multiprocessor systems where reliability evaluation becomes one of the main concerns in analyzing these networks properly. In many cases, the primary objective in system reliability analysis is to compute a failure distribution of the entire system according to that of its components. However, since the problem is known to be NP-hard, in none of the previous efforts, the precise evaluation of the system failure rate has been performed. Therefore, our goal is to investigate this parameter for different fault-tolerant MINs using Weibull life distribution that is one of the most commonly used distributions in reliability. In this paper, four important groups of fault-tolerant MINs will be examined to find the best fault-tolerance techniques in terms of failure rate; (1) Extra-stage MINs, (2) Parallel MINs, (3) Rearrangeable non-blocking MINs, and (4) Replicated MINs. This paper comprehensively analyzes all perspectives of the reliability (terminal, broadcast, and network reliability). Moreover, in this study, all reliability equations are calculated for different network sizes. - Highlights: • The failure rate of different MINs is analyzed by using Weibull life distribution. • This article tries to find the best fault-tolerance technique in the field of MINs. • Complex series-parallel RBDs are used to determine the reliability of the MINs. • All aspects of the reliability (i.e. terminal, broadcast, and network) are analyzed. • All reliability equations will be calculated for different size N×N.

  3. Modelling in Evaluating a Working Life Project in Higher Education

    Science.gov (United States)

    Sarja, Anneli; Janhonen, Sirpa; Havukainen, Pirjo; Vesterinen, Anne

    2012-01-01

    This article describes an evaluation method based on collaboration between the higher education, a care home and university, in a R&D project. The aim of the project was to elaborate modelling as a tool of developmental evaluation for innovation and competence in project cooperation. The approach was based on activity theory. Modelling enabled a…

  4. Using the learning management evaluation model for advancing to life skills of lower secondary students in the 21st century

    Science.gov (United States)

    Kansaart, Preecha; Suikraduang, Arun; Panya, Piyatida

    2018-01-01

    The aims of this research study were to develop the Learning Management Evaluation Model (LMEM) for advancing to lower secondary students of their life skills in the 21st century with the Research & Development process technique. The research procedures were administered of four steps that composed of analyze, the synthetic indicator to assess learning to advance to their life skills in the 21st century by the 4-educational experts were interviewed. The LMEM model was developed by the information from the first draft format and the educational experts to check a suitability and feasibility of the draft assessment form with a technical symposium multipath characteristics to find consensus dimensional (Multi-Attribute Consensus Reaching: MACR) by 12 specialists who provided the instruction in the form of Assessment and Evaluation Guide (AEG) was brought to five the number of professionals who ensure the proper coverage, a clear assessment of the manual before using the AEG. The LMEM model was to trial at an experiment with different schools in the Secondary Educational Office Area 26 (Maha Sarakham) whereas taught at the upper secondary educational school with the sample consisted of 7 schools with the purposive sampling was selected. Assessing the LMEM model was evaluated the based on the evaluation criteria of the educational development. The assessor was related to the trial consisted of 35 evaluators. Using the interview form with the rubric score and a five rating scale level was analyzed; the qualitative and quantitative data were used. It has found that: The LMEM evaluation model of learning to advance to life skills of students in the 21st century was a chart structure that ties together of 6 relevant components of the evaluation such as; the purpose of the assessment, the evaluation focused assessment methods, the evaluator, the evaluation technique, and the evaluation criteria. The evaluation targets were to assess the management of learning, the factors

  5. Evaluating drug prices, availability, affordability, and price components: implications for access to drugs in Malaysia.

    Science.gov (United States)

    Babar, Zaheer Ud Din; Ibrahim, Mohamed Izham Mohamed; Singh, Harpal; Bukahri, Nadeem Irfan; Creese, Andrew

    2007-03-27

    Malaysia's stable health care system is facing challenges with increasing medicine costs. To investigate these issues a survey was carried out to evaluate medicine prices, availability, affordability, and the structure of price components. The methodology developed by the World Health Organization (WHO) and Health Action International (HAI) was used. Price and availability data for 48 medicines was collected from 20 public sector facilities, 32 private sector retail pharmacies and 20 dispensing doctors in four geographical regions of West Malaysia. Medicine prices were compared with international reference prices (IRPs) to obtain a median price ratio. The daily wage of the lowest paid unskilled government worker was used to gauge the affordability of medicines. Price component data were collected throughout the supply chain, and markups, taxes, and other distribution costs were identified. In private pharmacies, innovator brand (IB) prices were 16 times higher than the IRPs, while generics were 6.6 times higher. In dispensing doctor clinics, the figures were 15 times higher for innovator brands and 7.5 for generics. Dispensing doctors applied high markups of 50%-76% for IBs, and up to 316% for generics. Retail pharmacy markups were also high-25%-38% and 100%-140% for IBs and generics, respectively. In the public sector, where medicines are free, availability was low even for medicines on the National Essential Drugs List. For a month's treatment for peptic ulcer disease and hypertension people have to pay about a week's wages in the private sector. The free market by definition does not control medicine prices, necessitating price monitoring and control mechanisms. Markups for generic products are greater than for IBs. Reducing the base price without controlling markups may increase profits for retailers and dispensing doctors without reducing the price paid by end users. To increase access and affordability, promotion of generic medicines and improved availability

  6. Evaluating drug prices, availability, affordability, and price components: implications for access to drugs in Malaysia.

    Directory of Open Access Journals (Sweden)

    Zaheer Ud Din Babar

    2007-03-01

    Full Text Available BACKGROUND: Malaysia's stable health care system is facing challenges with increasing medicine costs. To investigate these issues a survey was carried out to evaluate medicine prices, availability, affordability, and the structure of price components. METHODS AND FINDINGS: The methodology developed by the World Health Organization (WHO and Health Action International (HAI was used. Price and availability data for 48 medicines was collected from 20 public sector facilities, 32 private sector retail pharmacies and 20 dispensing doctors in four geographical regions of West Malaysia. Medicine prices were compared with international reference prices (IRPs to obtain a median price ratio. The daily wage of the lowest paid unskilled government worker was used to gauge the affordability of medicines. Price component data were collected throughout the supply chain, and markups, taxes, and other distribution costs were identified. In private pharmacies, innovator brand (IB prices were 16 times higher than the IRPs, while generics were 6.6 times higher. In dispensing doctor clinics, the figures were 15 times higher for innovator brands and 7.5 for generics. Dispensing doctors applied high markups of 50%-76% for IBs, and up to 316% for generics. Retail pharmacy markups were also high-25%-38% and 100%-140% for IBs and generics, respectively. In the public sector, where medicines are free, availability was low even for medicines on the National Essential Drugs List. For a month's treatment for peptic ulcer disease and hypertension people have to pay about a week's wages in the private sector. CONCLUSIONS: The free market by definition does not control medicine prices, necessitating price monitoring and control mechanisms. Markups for generic products are greater than for IBs. Reducing the base price without controlling markups may increase profits for retailers and dispensing doctors without reducing the price paid by end users. To increase access and

  7. Evaluating Drug Prices, Availability, Affordability, and Price Components: Implications for Access to Drugs in Malaysia

    Science.gov (United States)

    Babar, Zaheer Ud Din; Ibrahim, Mohamed Izham Mohamed; Singh, Harpal; Bukahri, Nadeem Irfan; Creese, Andrew

    2007-01-01

    Background Malaysia's stable health care system is facing challenges with increasing medicine costs. To investigate these issues a survey was carried out to evaluate medicine prices, availability, affordability, and the structure of price components. Methods and Findings The methodology developed by the World Health Organization (WHO) and Health Action International (HAI) was used. Price and availability data for 48 medicines was collected from 20 public sector facilities, 32 private sector retail pharmacies and 20 dispensing doctors in four geographical regions of West Malaysia. Medicine prices were compared with international reference prices (IRPs) to obtain a median price ratio. The daily wage of the lowest paid unskilled government worker was used to gauge the affordability of medicines. Price component data were collected throughout the supply chain, and markups, taxes, and other distribution costs were identified. In private pharmacies, innovator brand (IB) prices were 16 times higher than the IRPs, while generics were 6.6 times higher. In dispensing doctor clinics, the figures were 15 times higher for innovator brands and 7.5 for generics. Dispensing doctors applied high markups of 50%–76% for IBs, and up to 316% for generics. Retail pharmacy markups were also high—25%–38% and 100%–140% for IBs and generics, respectively. In the public sector, where medicines are free, availability was low even for medicines on the National Essential Drugs List. For a month's treatment for peptic ulcer disease and hypertension people have to pay about a week's wages in the private sector. Conclusions The free market by definition does not control medicine prices, necessitating price monitoring and control mechanisms. Markups for generic products are greater than for IBs. Reducing the base price without controlling markups may increase profits for retailers and dispensing doctors without reducing the price paid by end users. To increase access and affordability

  8. Use of an additive in biofuel to evaluate emissions, engine component wear and lubrication characteristics

    International Nuclear Information System (INIS)

    Kalam, M.A.; Majsuki, H.H.

    2003-01-01

    This paper presents the results of experiments carried out to evaluate the effect of adding an anticorrosion additive to blended biofuel and lubricating oil on emissions, engine component wear and lubrication characteristics. The blended biofuels consist of 7.5 and 15 per cent palm olein (PO) with ordinary diesel oil (OD). Pure OD was used for comparison purposes. Exhaust emission gases such as NO x , CO and hydrocarbons (HCs) were measured by an exhaust emission analyser for engine operation on 50 per cent throttle at speeds of 800-3600 r/min. To measure engine component wear and lubricating oil characteristics, the engine was operated at 50 per cent throttle at a speed of 2000 r/min for a period of 100 h with each of the fuel samples. The same lubricating oil, conventional SAE 40, was used in all the fuels. A multielement oil analyser (MOA) was used to measure the increase in wear of metals (Fe, Cu, Al, Pd) and the decrease in lubricating oil additives (Zn, Ca) in the lubricating oil used. An ISL automatic Houillon viscometer (ASTM D445) and potentiometric titration (ASTM D2896) were used to measure viscosity and total base number (TBN) respectively. The results show that the addition of anticorrosion additive with biofuel and lubricating oil improves the emission and engine wear characteristics; both the exhaust emission gases (NO x , CO and HCs) and the wear of metals (Fe, Cu, Al and Pd) decrease with the blended fuels in comparison with the base fuel OD. Detailed results, including engine brake power, are discussed. (Author)

  9. Verifying Digital Components of Physical Systems: Experimental Evaluation of Test Quality

    Science.gov (United States)

    Laputenko, A. V.; López, J. E.; Yevtushenko, N. V.

    2018-03-01

    This paper continues the study of high quality test derivation for verifying digital components which are used in various physical systems; those are sensors, data transfer components, etc. We have used logic circuits b01-b010 of the package of ITC'99 benchmarks (Second Release) for experimental evaluation which as stated before, describe digital components of physical systems designed for various applications. Test sequences are derived for detecting the most known faults of the reference logic circuit using three different approaches to test derivation. Three widely used fault types such as stuck-at-faults, bridges, and faults which slightly modify the behavior of one gate are considered as possible faults of the reference behavior. The most interesting test sequences are short test sequences that can provide appropriate guarantees after testing, and thus, we experimentally study various approaches to the derivation of the so-called complete test suites which detect all fault types. In the first series of experiments, we compare two approaches for deriving complete test suites. In the first approach, a shortest test sequence is derived for testing each fault. In the second approach, a test sequence is pseudo-randomly generated by the use of an appropriate software for logic synthesis and verification (ABC system in our study) and thus, can be longer. However, after deleting sequences detecting the same set of faults, a test suite returned by the second approach is shorter. The latter underlines the fact that in many cases it is useless to spend `time and efforts' for deriving a shortest distinguishing sequence; it is better to use the test minimization afterwards. The performed experiments also show that the use of only randomly generated test sequences is not very efficient since such sequences do not detect all the faults of any type. After reaching the fault coverage around 70%, saturation is observed, and the fault coverage cannot be increased anymore. For

  10. High income improves evaluation of life but not emotional well-being.

    Science.gov (United States)

    Kahneman, Daniel; Deaton, Angus

    2010-09-21

    Recent research has begun to distinguish two aspects of subjective well-being. Emotional well-being refers to the emotional quality of an individual's everyday experience--the frequency and intensity of experiences of joy, stress, sadness, anger, and affection that make one's life pleasant or unpleasant. Life evaluation refers to the thoughts that people have about their life when they think about it. We raise the question of whether money buys happiness, separately for these two aspects of well-being. We report an analysis of more than 450,000 responses to the Gallup-Healthways Well-Being Index, a daily survey of 1,000 US residents conducted by the Gallup Organization. We find that emotional well-being (measured by questions about emotional experiences yesterday) and life evaluation (measured by Cantril's Self-Anchoring Scale) have different correlates. Income and education are more closely related to life evaluation, but health, care giving, loneliness, and smoking are relatively stronger predictors of daily emotions. When plotted against log income, life evaluation rises steadily. Emotional well-being also rises with log income, but there is no further progress beyond an annual income of ~$75,000. Low income exacerbates the emotional pain associated with such misfortunes as divorce, ill health, and being alone. We conclude that high income buys life satisfaction but not happiness, and that low income is associated both with low life evaluation and low emotional well-being.

  11. High income improves evaluation of life but not emotional well-being

    Science.gov (United States)

    Kahneman, Daniel; Deaton, Angus

    2010-01-01

    Recent research has begun to distinguish two aspects of subjective well-being. Emotional well-being refers to the emotional quality of an individual's everyday experience—the frequency and intensity of experiences of joy, stress, sadness, anger, and affection that make one's life pleasant or unpleasant. Life evaluation refers to the thoughts that people have about their life when they think about it. We raise the question of whether money buys happiness, separately for these two aspects of well-being. We report an analysis of more than 450,000 responses to the Gallup-Healthways Well-Being Index, a daily survey of 1,000 US residents conducted by the Gallup Organization. We find that emotional well-being (measured by questions about emotional experiences yesterday) and life evaluation (measured by Cantril's Self-Anchoring Scale) have different correlates. Income and education are more closely related to life evaluation, but health, care giving, loneliness, and smoking are relatively stronger predictors of daily emotions. When plotted against log income, life evaluation rises steadily. Emotional well-being also rises with log income, but there is no further progress beyond an annual income of ~$75,000. Low income exacerbates the emotional pain associated with such misfortunes as divorce, ill health, and being alone. We conclude that high income buys life satisfaction but not happiness, and that low income is associated both with low life evaluation and low emotional well-being. PMID:20823223

  12. Development of an integrated database management system to evaluate integrity of flawed components of nuclear power plant

    International Nuclear Information System (INIS)

    Mun, H. L.; Choi, S. N.; Jang, K. S.; Hong, S. Y.; Choi, J. B.; Kim, Y. J.

    2001-01-01

    The object of this paper is to develop an NPP-IDBMS(Integrated DataBase Management System for Nuclear Power Plants) for evaluating the integrity of components of nuclear power plant using relational data model. This paper describes the relational data model, structure and development strategy for the proposed NPP-IDBMS. The NPP-IDBMS consists of database, database management system and interface part. The database part consists of plant, shape, operating condition, material properties and stress database, which are required for the integrity evaluation of each component in nuclear power plants. For the development of stress database, an extensive finite element analysis was performed for various components considering operational transients. The developed NPP-IDBMS will provide efficient and accurate way to evaluate the integrity of flawed components

  13. Evaluating the life cycle environmental impact of short span bridges

    DEFF Research Database (Denmark)

    Du, Guangli; Pettersson, Lars; Karoumi, Raid

    2016-01-01

    impact of the construction sector. Life cycle assessment (LCA) is a systematic method for assessing the environmental impact of products and systems, but its application in bridges is scarce. In Swede, most of the bridges are short spans and the type of concrete slab-frame bridge (CFB) accounts...... for a large share. Soil steel composite bridge (SSCB) is a functional equivalent solution for CFB. In order to mitigate the environmental burdens of short span bridges, this paper performed a comparative LCA study between these two types of bridge. The results indicate that the initial material consumption...

  14. Tools for evaluating oral health and quality of life.

    Science.gov (United States)

    Bettie, Nirmal F; Ramachandiran, Hari; Anand, Vijay; Sathiamurthy, Anusha; Sekaran, Preethi

    2015-08-01

    The seven dimensions of quality of life are required for a healthy living. Any impairment or disability affects any one or more of these dimensions resulting in functional impairment or handicap, which indicates the presence of disease. The success of any oral treatment depends on how far the individual is relieved of his disease process. Relief of symptoms provides patient comfort and enable functional activities. This well-being is considered as a measure of oral health and reflects patient satisfaction. This article presents various instruments or tools available in the form of a questionnaire that estimates patient satisfaction and thereby oral health.

  15. Life satisfaction, health, self-evaluation and sexuality in current university students of sport sciences, education and natural sciences

    Directory of Open Access Journals (Sweden)

    Martin Sigmund

    2014-12-01

    Full Text Available Background: Lifestyle and health of an individual are influenced by many factors; a significant factor is life satisfaction. Life satisfaction is understood as a multidimensional construct closely related to the area of personal wellbeing and quality of life. Life satisfaction in university students represents one of the determinants of good health, high motivation for studying, work productivity, satisfactory interpersonal relationships and overall healthy lifestyle. Objective: The main objective of the present study is to identify and compare the level of overall life satisfaction and selected components of health, self-evaluation and sexuality in current university students with respect to their study specialization. Methods: The study included a total of 522 students from Palacký University. These were students from the Faculty of Physical Culture (n = 118, Faculty of Education (n = 218 and Faculty of Science (n = 186. In terms of age, the study focused on young adults aged 19 to 26. To assess the current level of life satisfaction, the research study used a standardized psychodiagnostic tool - Life Satisfaction Questionnaire (LSQ. The used diagnostic methods are fully standardized and contain domestic normative values. Statistical result processing was conducted using the Statistica programme v10.0. Results: The highest level of overall life satisfaction was revealed in university students of sport sciences. In comparison with the students of education and students of natural sciences the difference is significant. Satisfaction with health among the students of sport sciences is significantly higher than in the students of education (p ≤ .001; d = 0.53 and the students of natural sciences (p ≤ .05; d = 0.38. Similar results were found in the area of satisfaction with own person and self-evaluation, where the values of the students of sport sciences were significantly higher compared with the students of education (p

  16. Monitoring and evaluation of wire mesh forming life

    Science.gov (United States)

    Enemuoh, Emmanuel U.; Zhao, Ping; Kadlec, Alec

    2018-03-01

    Forming tables are used with stainless steel wire mesh conveyor belts to produce variety of products. The forming tables will typically run continuously for several days, with some hours of scheduled downtime for maintenance, cleaning and part replacement after several weeks of operation. The wire mesh conveyor belts show large variation in their remaining life due to associated variations in their nominal thicknesses. Currently the industry is dependent on seasoned operators to determine the replacement time for the wire mesh formers. The drawback of this approach is inconsistency in judgements made by different operators and lack of data knowledge that can be used to develop decision making system that will be more consistent with wire mesh life prediction and replacement time. In this study, diagnostic measurements about the health of wire mesh former is investigated and developed. The wire mesh quality characteristics considered are thermal measurement, tension property, gage thickness, and wire mesh wear. The results show that real time thermal sensor and wear measurements would provide suitable data for the estimation of wire mesh failure, therefore, can be used as a diagnostic parameter for developing structural health monitoring (SHM) system for stainless steel wire mesh formers.

  17. Life cycle evaluation of spaceflight qualified nickel-hydrogen batteries

    Energy Technology Data Exchange (ETDEWEB)

    Coates, D.K.; Brill, J.N. [Eagle-Picher Industries, Inc., Joplin, MO (United States). Advanced Systems Operation

    1995-12-31

    Life cycle test results are summarized from more than 300 spaceflight qualified nickel-hydrogen (NiH{sub 2}) battery cells currently on life test. Cells ranging in size from 4 ampere-hours (Ah) to 120 Ah are being tested under a variety of conditions to support current NiH{sub 2} battery applications. Results to date include 55,600 accelerated LEO cycles at 30% DOD; 102,840 accelerated LEO cycles at 15% DOD; 44,900 cycles under a real-time LEO profile; 44,100 cycles in real-time LEO; 30 accelerated GEO eclipse seasons and 7 real-time GEO eclipse seasons, both at 75% DOD maximum. Alternative separator materials have completed more than 40,000 charge/discharge cycles in accelerated LEO testing and advanced design electrocatalytic hydrogen electrodes have completed more than 16,000 cycles in real-time LEO testing. Common pressure vessel cell designs have completed 18,000 cycles in real-time LEO testing at 45% DOD.

  18. Psychometric evaluation of the Danish and Swedish Satisfaction with Life Scale in first episode psychosis patients

    DEFF Research Database (Denmark)

    Hochwälder, Jacek; Mattsson, Maria; Holmqvist, Ragnhild

    2012-01-01

    PURPOSE: To psychometrically evaluate the Satisfaction with Life Scale in two cohorts of first-episode psychosis patients in the Danish National Schizophrenia Project and in the Swedish Parachute Project. METHOD: Four properties of the Satisfaction with Life Scale were examined in the Danish cohort....... The dimensions were confirmed in the Swedish sample. CONCLUSION: The Satisfaction with Life Scale shows satisfactory psychometric properties and seems valid and useful among first-episode psychosis patients....

  19. High income improves evaluation of life but not emotional well-being

    OpenAIRE

    Kahneman, Daniel; Deaton, Angus

    2010-01-01

    Recent research has begun to distinguish two aspects of subjective well-being. Emotional well-being refers to the emotional quality of an individual's everyday experience—the frequency and intensity of experiences of joy, stress, sadness, anger, and affection that make one's life pleasant or unpleasant. Life evaluation refers to the thoughts that people have about their life when they think about it. We raise the question of whether money buys happiness, separately for these two aspects of we...

  20. Development of methodology for evaluation of long-term safety aspects of organic cement paste components

    International Nuclear Information System (INIS)

    Andersson, M.; Holgersson, S.; Ervanne, H.

    2008-12-01

    Long-term safety aspects of superplasticizers (SP) and other cement paste components were studied in this joint Nagra - NUMO - SKB - Posiva project with aim to develop a methodology for the evaluation of the long-term safety aspects of superplasticizers (SP) and other organic components of cement pastes. The study also evaluated the effects of SPs and other cement paste components that have already been used or that are most likely to be used in the construction of the high-level nuclear waste repositories in Sweden, Switzerland, Finland and Japan. The main long-term safety issue of concern is whether the superplasticizers and/or other organic components of cement pastes might affect the transport properties of radionuclides. A full evaluation of whether the superplasticizers can be used in a high-level nuclear waste repository cannot be answered based on the studies but a classification of the superplasticizers based on their impact on sorption of radionuclides has been done. The basic methodology for testing, leaching and analyzing of leachants and solid samples of different types was developed at CRIEPI. Two different methodologies for studying the impact of SPs on the sorption of Eu on crushed rock were tested and developed by Helsinki University (HU) and Chalmers University of Technology (CTH). Methods for analyzing organics leaching from grouts were successfully tested by CRIEPI and CTH (Chalmers University of Technology). At CRIEPI the total organic content (TOC) of the leachants was analyzed by Infrared absorption spectrometry (IR) followed by Gel Permeation Chromatography (GPC) for the identification of the organic compounds. At CTH several different analytical methods were tested (e.g. IR, UV spectroscopy, NMR, MALDI-TOF), but these methods still require improvement. In addition to SPs, organics are present in several components of cement pastes, for example in cement grinding aid (CGA) and micro silica slurry. The results suggests that the main high

  1. Introduction of an index for drought evaluation using principle components analysis

    Directory of Open Access Journals (Sweden)

    S. Farhangfar

    2016-05-01

    Full Text Available Isfahan province is located in the center of Iran and has arid and semi-arid climate. In recent years, water shortage has increased in this region and has affected crop production. Wheat is one of the most important crops of the province. In the present research, an index (DEI has been developed for drought evaluation using long term climatic data through application of principle components analysis (PCA. The counties of the province were classified and evaluated according to drought intensity. In addition to DEI for quantifying drought, Aridity index (AI was also calculated at different time scales in each county. The climatic and grain yield data were collected from the Iranian Meteorological Organization and Isfahan Agricultural Organization, respectively. In order to remove the positive effects of genetic improvement and progress in agronomic management on long-term wheat grain yield, double exponential smoothing technique was used. According to DEI, Isfahan, Shahreza, Golpaygan and Natanz had semi-arid climate and Ardestan, Khoorobiabanak, Kashan and Naein could be classified as arid, while according to AI studied counties had arid climate. AI had the greatest amount only in Golpaygan while DEI had the greatest value in Isfahan, Shahreza, Golpaygan, Kashan and Natanz. PCA results showed that maximum temperature (coefficient of 3.51 followed by mean wind speed (coefficient of 2.27 were the main climatic variable influencing counties weather. Calculated drought indices showed poor correlation with wheat yield, indicating that other meteorological indices should still be examined to capture wheat yield variability in this province.

  2. The Effects of the Wildlife Habitat Evaluation Program on Targeted Life Skills

    Science.gov (United States)

    Allen, Kevin; Elmore, R. Dwayne

    2012-01-01

    Does participation in the Wildlife Habitat Evaluation Program (WHEP) help develop life skills? 4-H members and coaches who participated in the National WHEP Contest between the years 2003-2005 and 2007-2009 were asked to complete an evaluation at the end of each contest. A portion of the evaluation asked participants and coaches to determine if…

  3. Evaluating a "Second Life" Problem-Based Learning (PBL) Demonstrator Project: What Can We Learn?

    Science.gov (United States)

    Beaumont, Chris; Savin-Baden, Maggi; Conradi, Emily; Poulton, Terry

    2014-01-01

    This article reports the findings of a demonstrator project to evaluate how effectively Immersive Virtual Worlds (IVWs) could support problem-based learning. The project designed, created and evaluated eight scenarios within "Second Life" (SL) for undergraduate courses in health care management and paramedic training. Evaluation was…

  4. Evaluation of the nutrition counselling component of a fitness programme for children with disabilities.

    Science.gov (United States)

    Fragala-Pinkham, Maria A; Bradford, Laura; Haley, Stephen M

    2006-01-01

    To describe and evaluate the nutrition counselling component of a fitness programme for children with disabilities. Twenty-eight children with disabilities, ages 6-14 years, participated in a 16-week comprehensive fitness programme consisting of twice weekly exercise sessions, nutrition counselling and physical activity promotion education sessions. Nutrition sessions consisted of three individual and two group sessions. Individual nutrition goals were developed for each child using 3-day food intake diaries and parent interview. Body Mass Index (BMI) and progress towards nutrition goals were documented. No significant BMI changes were recorded for the entire group (n=28) or a sub-group with a goal to decrease BMI (n=8). Most of the children made improvements in individual goals indicating improvements in healthy eating habits. This included eating the daily recommended amount of servings of each food group, trying new foods and limiting foods containing saturated and trans fats, sodium and sugar. Short-term changes were noted in eating habits and behaviours during the 16-week fitness programme, although the effects did not influence overall BMI during the 16-week programme. Children with disabilities are at nutritional risk, and long-term follow-up is needed to determine if initial changes in parent-reported child eating behaviours will impact long-term nutrition, BMI and overall health.

  5. Quantitative evaluation of hidden defects in cast iron components using ultrasound activated lock-in vibrothermography.

    Science.gov (United States)

    Montanini, R; Freni, F; Rossi, G L

    2012-09-01

    This paper reports one of the first experimental results on the application of ultrasound activated lock-in vibrothermography for quantitative assessment of buried flaws in complex cast parts. The use of amplitude modulated ultrasonic heat generation allowed selective response of defective areas within the part, as the defect itself is turned into a local thermal wave emitter. Quantitative evaluation of hidden damages was accomplished by estimating independently both the area and the depth extension of the buried flaws, while x-ray 3D computed tomography was used as reference for sizing accuracy assessment. To retrieve flaw's area, a simple yet effective histogram-based phase image segmentation algorithm with automatic pixels classification has been developed. A clear correlation was found between the thermal (phase) signature measured by the infrared camera on the target surface and the actual mean cross-section area of the flaw. Due to the very fast cycle time (<30 s/part), the method could potentially be applied for 100% quality control of casting components.

  6. Fatigue evaluation including environmental effects for primary circuit components in nuclear power plants

    International Nuclear Information System (INIS)

    Seichter, Johannes; Reese, Sven H.; Klucke, Dietmar

    2013-01-01

    The influence of LWR coolant environment to the lifetime of materials in Nuclear Power Plants is in discussion internationally. Environmental phenomena were investigated in laboratory tests and published in recent years. The discussion is mainly focused both on the transition from laboratory to real plant components and on numerical calculation procedures. Since publishing of the NUREG/CR-6909 report in 2007, formulae for calculating the Fen factors have been modified several times. Various calculation procedures like the so called 'Strain-integrated Method' and 'Simplified Approach' have been published while each approach yields to different results. The recent revision of the calculation procedure, proposed by ANL in 2012, is presented and discussed with regard to possible variations in the results depending on the assumptions made. In German KTA Rules the effect of environmentally assisted fatigue (EAF) is taken into account by means of so called attention thresholds. If the threshold value is exceeded, further measures like NDT, in-service inspections including fracture mechanical evaluations or detailed assessment procedures have to be performed. One way to handle those measures is to apply sophisticated procedures and to show that the calculated CUF is below the defined attention thresholds. On the basis of a practical example, methods and approaches will be discussed and recommendations in terms of avoiding over-conservatism and misinterpretation will be presented.

  7. Evaluation of the Waste Isolation Pilot Plant classification of systems, structures and components

    International Nuclear Information System (INIS)

    1985-07-01

    A review of the classification system for systems, structures, and components at the Waste Isolation Pilot Plant (WIPP) was performed using the WIPP Safety Analysis Report (SAR) and Bechtel document D-76-D-03 as primary source documents. The regulations of the US Nuclear Regulatory Commission (NRC) covering ''Disposal of High level Radioactive Wastes in Geologic Repositories,'' 10 CFR 60, and the regulations relevant to nuclear power plant siting and construction (10 CFR 50, 51, 100) were used as standards to evaluate the WIPP design classification system, although it is recognized that the US Department of Energy (DOE) is not required to comply with these NRC regulations in the design and construction of WIPP. The DOE General Design Criteria Manual (DOE Order 6430.1) and the Safety Analysis and Review System for AL Operation document (AL 54f81.1A) were reviewed in part. This report includes a discussion of the historical basis for nuclear power plant requirements, a review of WIPP and nuclear power plant classification bases, and a comparison of the codes and standards applicable to each quality level. Observations made during the review of the WIPP SAR are noted in the text of this reoport. The conclusions reached by this review are: WIPP classification methodology is comparable to corresponding nuclear power procedures. The classification levels assigned to WIPP systems are qualitatively the same as those assigned to nuclear power plant systems

  8. Evaluation of Algorithms for Photon Depth of Interaction Estimation for the TRIMAGE PET Component

    Science.gov (United States)

    Camarlinghi, Niccolò; Belcari, Nicola; Cerello, Piergiorgio; Pennazio, Francesco; Sportelli, Giancarlo; Zaccaro, Emanuele; Del Guerra, Alberto

    2016-02-01

    The TRIMAGE consortium aims to develop a multimodal PET/MR/EEG brain scanner dedicated to the early diagnosis of schizophrenia and other mental health disorders. The TRIMAGE PET component features a full ring made of 18 detectors, each one consisting of twelve 8 ×8 Silicon PhotoMultipliers (SiPMs) tiles coupled to two segmented LYSO crystal matrices with staggered layers. The identification of the pixel where a photon interacted is performed on-line at the front-end level, thus allowing the FPGA board to emit fully digital event packets. This allows to increase the effective bandwidth, but imposes restrictions on the complexity of the algorithms to be implemented. In this work, two algorithms, whose implementation is feasible directly on an FPGA, are presented and evaluated. The first algorithm is driven by physical considerations, while the other consists in a two-class linear Support Vector Machine (SVM). The validation of the algorithm performance is carried out by using simulated data generated with the GAMOS Monte Carlo. The obtained results show that the achieved accuracy in layer identification is above 90% for both the proposed approaches. The feasibility of tagging and rejecting events that underwent multiple interactions within the detector is also discussed.

  9. An evaluation of governance capacity of the specialized component of pharmaceutical services in Brazil.

    Science.gov (United States)

    Rover, Marina Raijche Mattozo; Peláez, Claudia Marcela Vargas; Faraco, Emília Baierle; Farias, Mareni Rocha; Leite, Silvana Nair

    2017-08-01

    This paper presents application of an indicator protocol to assessment of current levels of governance capacity of the Specialized Component of Pharmaceutical Services (CEAF) in a state of the South of Brazil. We chose the theoretical referential of 'governance capacity' proposed by Carlos Matus, which reflects in the concepts of management capacity and pharmaceutical service management, due to the perception of a need to overcome the fragmentation and technicist reductionism that we believe has been imposed on the area of pharmaceutical services. Data was collected using the protocol in 74 municipal or state units. The results of the analysis indicate that the currently existing governance capacity needs improvement in all three dimensions that were evaluated, principally in relation to the aspects that seek sustainability of the governance. The model and the protocol used indicate a way forward for governance of pharmaceutical service by proposing a change from the technicist-logistical focus to an emphasis on strategic and political actions, or ones which foster greater participation and autonomy. With these results in hand, it will be possible to develop strategies for improvement of access to medicines in the SUS, in the sense that the CEAF becomes able to guarantee integrality of medicines treatments.

  10. Fatigue evaluation including environmental effects for primary circuit components in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Seichter, Johannes [Siempelkamp Pruef- und Gutachter-Gesellschaft mbH, Dresden (Germany); Reese, Sven H.; Klucke, Dietmar [Component Technology Global Unit Generation, E.ON Kernkraft GmbH, Hannover (Germany)

    2013-05-15

    The influence of LWR coolant environment to the lifetime of materials in Nuclear Power Plants is in discussion internationally. Environmental phenomena were investigated in laboratory tests and published in recent years. The discussion is mainly focused both on the transition from laboratory to real plant components and on numerical calculation procedures. Since publishing of the NUREG/CR-6909 report in 2007, formulae for calculating the Fen factors have been modified several times. Various calculation procedures like the so called 'Strain-integrated Method' and 'Simplified Approach' have been published while each approach yields to different results. The recent revision of the calculation procedure, proposed by ANL in 2012, is presented and discussed with regard to possible variations in the results depending on the assumptions made. In German KTA Rules the effect of environmentally assisted fatigue (EAF) is taken into account by means of so called attention thresholds. If the threshold value is exceeded, further measures like NDT, in-service inspections including fracture mechanical evaluations or detailed assessment procedures have to be performed. One way to handle those measures is to apply sophisticated procedures and to show that the calculated CUF is below the defined attention thresholds. On the basis of a practical example, methods and approaches will be discussed and recommendations in terms of avoiding over-conservatism and misinterpretation will be presented.

  11. Design Of Measurements For Evaluating Readiness Of Technoware Components To Meet The Required Standard Of Products

    Science.gov (United States)

    Fauzi, Ilham; Muharram Hasby, Fariz; Irianto, Dradjad

    2018-03-01

    Although government is able to make mandatory standards that must be obeyed by the industry, the respective industries themselves often have difficulties to fulfil the requirements described in those standards. This is especially true in many small and medium sized enterprises that lack the required capital to invest in standard-compliant equipment and machineries. This study aims to develop a set of measurement tools for evaluating the level of readiness of production technology with respect to the requirements of a product standard based on the quality function deployment (QFD) method. By combining the QFD methodology, UNESCAP Technometric model [9] and Analytic Hierarchy Process (AHP), this model is used to measure a firm’s capability to fulfill government standard in the toy making industry. Expert opinions from both the governmental officers responsible for setting and implementing standards and the industry practitioners responsible for managing manufacturing processes are collected and processed to find out the technological capabilities that should be improved by the firm to fulfill the existing standard. This study showed that the proposed model can be used successfully to measure the gap between the requirements of the standard and the readiness of technoware technological component in a particular firm.

  12. Evaluation by EPR of potential antioxidant components of 60Co-irradiated varieties of soybean

    International Nuclear Information System (INIS)

    Oliveira, Marcos Ronaldo Ramos de

    2009-01-01

    Brazil is today the second main producer of soybean in the world with a planted ground of about 21 million hectares and an annual production of 60 million tons in 2008, being slight more than a fourth of the annual production. The presence of flavonoids, particularly isoflavones in soybean products has been related as important for human health. It has been suggested that flavonoids play a role in the protection of plants by screening vital cellular components from damaging UV radiation. Electron paramagnetic resonance (EPR) spectroscopy can measure free radicals produced by dissociation molecules resulting from irradiation. It has been successfully employed for the detection of some irradiated food products. Twenty one Brazilian soybean cultivars from two crops were gamma-irradiated with a 60 Co source and evaluated by EPR. Correlation coefficients were made among the central EPR signal (g = 2.0039) and the total and partial isoflavones contents. There was no correlation with total contents, though glicitein and acetyl-daidzin showed a negative correlation. Even 7 months after irradiation the intensity of central EPR signal were high enough to distinguish the irradiated samples. EPR measurements of separated parts of the grain were more efficient for that purpose, particularly from hilum and coat. The radiation did not change substantially the total isoflavone contents, although there were some evidences suggesting some conversion of glycosides to aglycones. (author)

  13. Magnetic Resonance Evaluation of the Presence of an Extensive Intraductal Component in Breast Cancer

    International Nuclear Information System (INIS)

    Ikeda, O.; Nishimura, R.; Miyayama, H.; Yasunaga, T.; Ozaki, Y.; Tsuji, A.; Yamashita, Y.

    2004-01-01

    Purpose: To determine whether the presence of extensive intraductal components (EIC) in breast carcinomas can be accurately evaluated on magnetic resonance (MR) images. Material and Methods: Ninety-three women with breast cancer, aged between 32 and 79 years (mean 54 years), underwent three-dimensional dynamic MR imaging (dyMRI) with fat suppression and magnetization transfer contrast before breast-conserving surgery. The tumors were classified on dyMRI as circumscribed, microlobulated, and/or speculated, and their size was measured. Spotty or linear continuous enhancement (SLE) from the main tumor to the nipple and segmental enhancement surrounding the main tumor (SE) were considered indicative of intraductal tumor spread. The correlation between preoperative MRI and macroscopic and microscopic findings was examined. Results: On MR images, the tumor sizes ranged from 0.8 to 3.4 cm. These measurements coincided with histologic measurements in circumscribed tumors. However, in tumors with microlobulated or spiculated borders, tumor size tended to be underestimated on MR images. Of 93 patients, 59 (63.4%) had histologically confirmed EIC; 42 of the 59 cancers (71.2%) manifested SLE or SE on MR images. The sensitivity, specificity, and accuracy of MR imaging in detecting EIC were 71%, 85%, and 76%, respectively. Conclusion: MR imaging facilitates the detection of EIC in breast masses. This information is valuable for the planning of breast-conserving surgery

  14. Evaluation of Staining-Dependent Colour Changes in Resin Composites Using Principal Component Analysis.

    Science.gov (United States)

    Manojlovic, D; Lenhardt, L; Milićević, B; Antonov, M; Miletic, V; Dramićanin, M D

    2015-10-09

    Colour changes in Gradia Direct™ composite after immersion in tea, coffee, red wine, Coca-Cola, Colgate mouthwash, and distilled water were evaluated using principal component analysis (PCA) and the CIELAB colour coordinates. The reflection spectra of the composites were used as input data for the PCA. The output data (scores and loadings) provided information about the magnitude and origin of the surface reflection changes after exposure to the staining solutions. The reflection spectra of the stained samples generally exhibited lower reflection in the blue spectral range, which was manifested in the lower content of the blue shade for the samples. Both analyses demonstrated the high staining abilities of tea, coffee, and red wine, which produced total colour changes of 4.31, 6.61, and 6.22, respectively, according to the CIELAB analysis. PCA revealed subtle changes in the reflection spectra of composites immersed in Coca-Cola, demonstrating Coca-Cola's ability to stain the composite to a small degree.

  15. Prospective longitudinal evaluation of lung function during the first year of life after extracorporeal membrane oxygenation

    NARCIS (Netherlands)

    Hofhuis, W.; Hanekamp, M.N.; Ijsselstijn, H.; Nieuwhof, E.M.; Hop, W.C.J.; Tibboel, D.; Jongste, J.C. de; Merkus, P.J.F.M.

    2011-01-01

    OBJECTIVE: To collect longitudinal data on lung function in the first year of life after extracorporeal membrane oxygenation and to evaluate relationships between lung function and perinatal factors. Longitudinal data on lung function in the first year of life after extracorporeal membrane

  16. Evaluation of life cycle inventory data for recycling systems

    DEFF Research Database (Denmark)

    Brogaard, Line Kai-Sørensen; Damgaard, Anders; Jensen, Morten Bang

    2014-01-01

    This paper reviews databases on material recycling (primary as well as secondary production) used in life cycle assessments (LCA) of waste management systems. A total of 366 datasets, from 1980 to 2010 and covering 14 materials, were collected from databases and reports. Totals for CO2-equivalent...... the primary production of newsprint, HDPE and glass were 238%, 443% and 452%, respectively. For steel and aluminium the differences were 1761% and 235%, respectively. There is a severe lack of data for some recycled materials; for example, only one dataset existed for secondary cardboard. The study shows...... datasets to use could not be determined from the study. However, from the gathered data, recycling in general showed lower emission of CO2 per kg material than primary production, so the recycling of materials (considered in this study) is thus beneficial in most cases....

  17. Noninvasive Medical Tools for Evaluating Voiding Pattern in Real Life

    Directory of Open Access Journals (Sweden)

    Kwonsoo Chun

    2017-04-01

    Full Text Available Voiding dysfunction is a common disease that contributes to a lower quality of life and has an increased prevalence in the elderly population. Noninvasive and objective methods such as uroflowmetry (UFM and voiding diaries (VDs are essential for exact diagnosis and effective treatment of this condition because patients with different causes of voiding dysfunction can complain of the same lower urinary tract symptoms. Further, different treatment options can be determined based on the diagnosis made from these symptoms. In order to improve the quality of UFM and VDs and to provide a convenient testing environment, several advances have been made by previous investigators. In this study, we investigate the history and technological mechanisms of UFM and VDs. We also aim to review UFM from the viewpoint of clinical and at-home uses, including the recently proposed toilet-shaped UFM and electronic VDs.

  18. Environmental profile evaluations of piezoelectric polymers using life cycle assessment

    Science.gov (United States)

    Parvez Mahmud, M. A.; Huda, Nazmul; Hisan Farjana, Shahjadi; Lang, Candace

    2018-05-01

    Piezoelectric materials are indispensable to produce electricity, harvesting ambient mechanical energy through motion for sectors and products, from sensors, to biomedical systems, to tiny electronics. Nylon 66 and tetrafluoroethylene dominate the market among thousands of piezoelectric materials to provide an autonomous power supply. Emphasis has been given on investigating the environmental impacts of both materials due to the growing consciousness of the ecological and health risks of piezoelectric polymers. The fabrication steps of these polymers from raw materials are extremely hazardous to the environment in terms of toxicity and human health effects. However, no quantification of the possible environmental impacts for the manufacturing of nylon 66 and tetrafluoroethylene exists. This research paper addresses their comparative environmental effects, in terms of chemical constituents. Life cycle impact analysis has been carried out by ReCipe 2016 Endpoint, Ecopoints 97, Raw material flows and CML-IA baseline methods, using Australasian life cycle inventory database and SimaPro software. The impacts are considered in categories like global warming, eutrophication, terrestrial ecotoxicity, human carcinogenic toxicity, fine particulates, and marine ecotoxicity. The results show that there is a significant environmental impact caused by tetrafluoroethylene in comparison with nylon 66 polymer during the manufacturing process. These impacts occur due to the quantity of toxic chemical elements present as constituents of tetrafluoroethylene raw material and its fabrication periods. It can be anticipated that a better ecological performance can be attained through optimization, especially by cautiously picking substitute materials and machines, taking into account the toxicity aspects, and by minimizing the impacts related to designs, fabrication processes and usage.

  19. Structural mechanics research and development for main components of chinese 300 MWe PWR NPPs: from design to life management

    International Nuclear Information System (INIS)

    Yao Weida; Dou Yikang; Xie Yongcheng; He Yinbiao; Zhang Ming; Liang Xingyun

    2005-01-01

    Qinshan Nuclear Power Plant (Unit I), is a 300 MWe prototype PWR independently developed by Chinese own efforts, from design, manufacture, construction, installation, commissioning, to operation, inspection, maintenance, ageing management and lifetime assessment. Shanghai Nuclear Engineering Research and Design Institute (SNERDI) has taken up with and involved in deeply the R and D to tackle problems of this type of reactor since very beginning in early 1970s. Structural mechanics is one of the important aspects to ensure the safety and reliability for NPP components. This paper makes a summary on role of structural mechanics for component safety and reliability assessment in different stages of design, commissioning, operation, as well as lifetime assessment on this type PWR NPPs, including Qinshan-I and Chashma-I, a sister plant in Pakistan designed by SNERDI. The main contents of the paper cover design by analysis for key components of NSSS; mechanical problems relating to safety analysis; special problems relating to pressure retaining components, such as fracture mechanics, sealing analysis and its test verifications, etc.; experimental research on flow-induced vibration; seismic qualification for components; component failure diagnosis and root cause analysis; vibration qualification and diagnosis technique; component online monitoring technique; development of defect assessment; methodology of aging management and lifetime assessment for key components of NPPs, etc. (authors)

  20. BTC method for evaluation of remaining strength and service life of bridge cables.

    Science.gov (United States)

    2011-09-01

    "This report presents the BTC method; a comprehensive state-of-the-art methodology for evaluation of remaining : strength and residual life of bridge cables. The BTC method is a probability-based, proprietary, patented, and peerreviewed : methodology...

  1. Failure rate evaluation for different components operating in sodium, based on operating experience of the RAPSODIE and the PHENIX reactors and the test loops

    International Nuclear Information System (INIS)

    Boisseau, J.; Dorey, J.; Hedin, F.; Le Floch, C.

    1982-01-01

    The failure rates of the following components, valves operating in sodium, mechanical and electromagnetic pumps, and heat exchangers including intermediate heat exchangers, cold traps, steam generators, are evaluated by analysing the main incidents which occurred on these components. Therefore, this paper contains an evaluation of the operating experience of components working in sodium and of the reliability of these components

  2. Evaluating the Sustainability of Manufacturing: Process and Life Cycle Assessments

    Science.gov (United States)

    The Circular Economy is a popular term in environmental studies, but methods are needed to quickly and accurately evaluate recycling opportunities rather than assuming that recycling is appropriate. Through the study of recycling processes (i.e., processes that turn wastes into ...

  3. Evaluation of manual wheelchair performance in everyday life

    NARCIS (Netherlands)

    van der Woude, L.H.V.; de Groot, S.; van Drongelen, S.; Janssen, T.W.J.; Haisma, J.; Valent, L.; Veeger, H.E.J.

    2009-01-01

    Evaluation of wheelchair performance (capacity and skills) is crucial in the investigation of wheeled mobility in people with a spinal cord injury (SCI). Manual wheelchair use is a complex combination of skills, which together determine overall functioning, daily activities, participation, and

  4. Fluoride in the Serra Geral Aquifer System: Source Evaluation Using Stable Isotopes and Principal Component Analysis

    OpenAIRE

    Nanni, Arthur Schmidt; Roisenberg, Ari; de Hollanda, Maria Helena Bezerra Maia; Marimon, Maria Paula Casagrande; Viero, Antonio Pedro; Scheibe, Luiz Fernando

    2013-01-01

    Groundwater with anomalous fluoride content and water mixture patterns were studied in the fractured Serra Geral Aquifer System, a basaltic to rhyolitic geological unit, using a principal component analysis interpretation of groundwater chemical data from 309 deep wells distributed in the Rio Grande do Sul State, Southern Brazil. A four-component model that explains 81% of the total variance in the Principal Component Analysis is suggested. Six hydrochemical groups were identified. δ18O and δ...

  5. Evaluation of Life Sciences and Social Sciences Course Books in Term of Societal Sexuality

    Science.gov (United States)

    Aykac, Necdet

    2012-01-01

    This study aims to evaluate primary school Life Sciences (1st, 2nd, and 3rd grades) and Social Sciences (4th, 5th, and 6th grades) course books in terms of gender discrimination. This study is a descriptive study aiming to evaluate the primary school Life Sciences (1st, 2nd, 3rd grades) and Social Sciences (4th, 5th, and 6th grades) course books…

  6. Combined cycle power plants: A comparison between two different dynamic models to evaluate transient behaviour and residual life

    International Nuclear Information System (INIS)

    Benato, Alberto; Stoppato, Anna; Bracco, Stefano

    2014-01-01

    Highlights: • Two procedures aimed at simulating the dynamic behaviour of power plants are compared. • They both are aimed at predicting the residual life of plant devices. • A single pressure gas-steam combined plant has been modelled. • A good correspondence has been found despite the different approaches used. - Abstract: The deregulated energy market and the increasing quota of electrical capacity covered by non-predictable renewable sources require strongly irregular and discontinuous operation of thermoelectric plants to satisfy users demand and compensate the variability of renewable sources. As a consequence, due to thermo-mechanical fatigue, creep and corrosion, a lifetime reduction of the most critical components occurs. The availability of a procedure able to predict the residual life of plant devices is necessary to assist the management decisions about power plants’ operation and maintenance scheduling. The first step of this procedure is the capability of simulating the plant behaviour versus time by evaluating the trends of the main thermodynamic parameters that describe the plant operation during different transient periods. In this context, the main contribution of the present paper is to propose a complete procedure able to simulate the plant dynamic behaviour and estimate the residual life reduction of some components. Indeed, two different models, developed by two different research groups, of the same single pressure heat recovery steam generator unit are presented and utilized to characterize the dynamic behaviour of the above mentioned power plant. The main thermodynamic variables during different transient operation conditions are predicted and good correspondence between the two methods is obtained. It can be also noted that, when the geometry and size of the devices are considered, the thermal inertia related to heat exchangers tubes, pipes and other physical masses causes a delay in the system response. Moreover, a residual life

  7. A Study for Shelf Life Evaluation of Rubber O-ring

    International Nuclear Information System (INIS)

    Jung, Sun Chul; Kim, Jong Seog

    2005-01-01

    Non-metallic materials stored in warehouses in nuclear power plants have shelf life. The shelf life means the maximum storage time allowable such that the install life of the material is not affected. Materials whose shelf lives expire are generally discarded. unless the shelf lives of these materials can be extended by reducing the install life. Examples of this case are rubber materials. Rubber materials are widely used for sealing of various machines. There are various life evaluation methods for rubber material. For example, the compression set is generally used for evaluation the aging condition of rubber materials used for sealing. A compression set value can be calculated according to the ASTM D395. We have tried the compression set test by using specimens with 6.99mm diameter O-ring even when ASTM D 395 recommends the use of bar specimen. Test results and comparison between O-ring and reference data of EPRI NP-6608 are presented below

  8. Study of a simplified method of evaluating the economic maintenance importance of components in nuclear power plant system

    International Nuclear Information System (INIS)

    Aoki, Takayuki; Takagi, Toshiyuki; Kodama, Noriko

    2014-01-01

    Safety risk importance of components in nuclear power plants has been evaluated based on the probabilistic risk assessment and used for the decisions in various plant managements. But economic risk importance of the components has not been discussed very much. Therefore, this paper discusses risk importance of the components from the viewpoint of plant economic efficiency and proposes a simplified evaluation method of the economic risk importance (or economic maintenance importance). As a result of consideration, the followings were obtained. (1) A unit cost of power generation is selected as a performance indicator and can be related to a failure rate of components in nuclear power plant which is a result of maintenance. (2) The economic maintenance importance has to major factors, i.e. repair cost at component failure and production loss associated with plant outage due to component failure. (3) The developed method enables easy understanding of economic impacts of plant shutdown or power reduction due to component failures on the plane which adopts the repair cost in vertical axis and the production loss in horizontal axis. (author)

  9. [Evaluate drug interaction of multi-components in Morus alba leaves based on α-glucosidase inhibitory activity].

    Science.gov (United States)

    Ji, Tao; Su, Shu-Lan; Guo, Sheng; Qian, Da-Wei; Ouyang, Zhen; Duan, Jin-Ao

    2016-06-01

    Column chromatography was used for enrichment and separation of flavonoids, alkaloids and polysaccharides from the extracts of Morus alba leaves; glucose oxidase method was used with sucrose as the substrate to evaluate the multi-components of M. alba leaves in α-glucosidase inhibitory models; isobole method, Chou-Talalay combination index analysis and isobolographic analysis were used to evaluate the interaction effects and dose-effect characteristics of two components, providing scientific basis for revealing the hpyerglycemic mechanism of M. alba leaves. The components analysis showed that flavonoid content was 5.3%; organic phenolic acids content was 10.8%; DNJ content was 39.4%; and polysaccharide content was 18.9%. Activity evaluation results demonstrated that flavonoids, alkaloids and polysaccharides of M. alba leaves had significant inhibitory effects on α-glucosidase, and the inhibitory rate was increased with the increasing concentration. Alkaloids showed most significant inhibitory effects among these three components. Both compatibility of alkaloids and flavonoids, and the compatibility of alkaloids and polysaccharides demonstrated synergistic effects, but the compatibility of flavonoids and polysaccharides showed no obvious synergistic effects. The results have confirmed the interaction of multi-components from M. alba leaves to regulate blood sugar, and provided scientific basis for revealing hpyerglycemic effectiveness and mechanism of the multi-components from M. alba leaves. Copyright© by the Chinese Pharmaceutical Association.

  10. Evaluation of algorithms for photon depth of interaction estimation for the TRIMAGE PET component

    Energy Technology Data Exchange (ETDEWEB)

    Camarlinghi, Niccolo; Belcari, Nicola [University of Pisa (Italy); Cerello, Piergiorgio [University of Torino (Italy); Sportelli, Giancarlo [University of Pisa (Italy); Pennazio, Francesco [University of Torino (Italy); Zaccario, Emanuele; Del Guerra, Alberto [University of Pisa (Italy)

    2015-05-18

    The TRIMAGE consortium aims to develop a multimodal PET/MR/EEG brain scanner dedicated to the early diagnosis of schizophrenia and other mental health disorders. The PET component features a full ring made of 18 detectors, each one consisting of twelve 8x8 Silicon PhotoMultipliers (SiPMs) tiles coupled to two segmented LYSO crystal matrices with staggered layers. In each module, the crystals belonging to the bottom layer are coupled one to one to the SiPMs, while each crystal of the top layer is coupled to four crystals of the bottom layer. This configuration allows to increase the crystal thickness while reducing the depth of interaction uncertainty, as photons interacting in different layers are expected to produce different light patterns on the SiPMs. The PET scanner will implement the pixel/layer identification on a front-end FPGA. This will allow increasing the effective bandwidth, setting at the same time restrictions on the complexity of the algorithms to be implemented. In this work two algorithms whose implementation is feasible directly on an FPGA are presented and evaluated. The first algorithm implements a method based on adaptive thresholding, while the other uses a linear Support Vector Machine (SVM) trained to distinguish the light pattern coming from two different layers. The validation of the algorithm performance is carried out by using simulated data generated with the GAMOS Monte Carlo. The obtained results show that the achieved accuracy in layer and pixel identification is above the 90% for both the proposed approaches.

  11. Performance evaluation of the CT component of the IRIS PET/CT preclinical tomograph

    Energy Technology Data Exchange (ETDEWEB)

    Panetta, Daniele [CNR Institute of Clinical Physiology (IFC-CNR), v. G. Moruzzi 1, I-56124 Pisa (Italy); Belcari, Nicola [Department of Physics “E. Fermi”, University of Pisa, L.go B. Pontecorvo 3, I-56127 Pisa (Italy); Tripodi, Maria [CNR Institute of Clinical Physiology (IFC-CNR), v. G. Moruzzi 1, I-56124 Pisa (Italy); Burchielli, Silvia [Fondazione CNR/Toscana “G. Monasterio” – FTGM, v. G. Moruzzi 1, I-56124 Pisa (Italy); Salvadori, Piero A. [CNR Institute of Clinical Physiology (IFC-CNR), v. G. Moruzzi 1, I-56124 Pisa (Italy); Del Guerra, Alberto [Department of Physics “E. Fermi”, University of Pisa, L.go B. Pontecorvo 3, I-56127 Pisa (Italy)

    2016-01-01

    In this paper, we evaluate the physical performance of the CT component of the IRIS scanner, a novel combined PET/CT scanner for preclinical imaging. The performance assessment is based on phantom measurement for the determination of image quality parameters (spatial resolution, linearity, geometric accuracy, contrast to noise ratio) and reproducibility in dynamic (4D) imaging. The CTDI{sub 100} has been measured free in air with a pencil ionization chamber, and the animal dose was calculated using Monte Carlo derived conversion factors taken from the literature. The spatial resolution at the highest quality protocol was 6.9 lp/mm at 10% of the MTF, using the smallest reconstruction voxel size of 58.8 μm. The accuracy of the reconstruction voxel size was within 0.1%. The linearity of the CT numbers as a function of the concentration of iodine was very good, with R{sup 2}>0.996 for all the tube voltages. The animal dose depended strongly on the scanning protocol, ranging from 158 mGy for the highest quality protocol (2 min, 80 kV) to about 12 mGy for the fastest protocol (7.3 s, 80 kV). In 4D dynamic modality, the maximum scanning rate reached was 3.1 frames per minute, using a short-scan protocol with 7.3 s of scan time per frame at the isotropic voxel size of 235 μm. The reproducibility of the system was high throughout the 10 frames acquired in dynamic modality, with a standard deviation of the CT values of all frames <8 HU and an average spatial reproducibility within 30% of the voxel size across all the field of view. Example images obtained during animal experiments are also shown.

  12. Performance evaluation of the CT component of the IRIS PET/CT preclinical tomograph

    Science.gov (United States)

    Panetta, Daniele; Belcari, Nicola; Tripodi, Maria; Burchielli, Silvia; Salvadori, Piero A.; Del Guerra, Alberto

    2016-01-01

    In this paper, we evaluate the physical performance of the CT component of the IRIS scanner, a novel combined PET/CT scanner for preclinical imaging. The performance assessment is based on phantom measurement for the determination of image quality parameters (spatial resolution, linearity, geometric accuracy, contrast to noise ratio) and reproducibility in dynamic (4D) imaging. The CTDI100 has been measured free in air with a pencil ionization chamber, and the animal dose was calculated using Monte Carlo derived conversion factors taken from the literature. The spatial resolution at the highest quality protocol was 6.9 lp/mm at 10% of the MTF, using the smallest reconstruction voxel size of 58.8 μm. The accuracy of the reconstruction voxel size was within 0.1%. The linearity of the CT numbers as a function of the concentration of iodine was very good, with R2>0.996 for all the tube voltages. The animal dose depended strongly on the scanning protocol, ranging from 158 mGy for the highest quality protocol (2 min, 80 kV) to about 12 mGy for the fastest protocol (7.3 s, 80 kV). In 4D dynamic modality, the maximum scanning rate reached was 3.1 frames per minute, using a short-scan protocol with 7.3 s of scan time per frame at the isotropic voxel size of 235 μm. The reproducibility of the system was high throughout the 10 frames acquired in dynamic modality, with a standard deviation of the CT values of all frames <8 HU and an average spatial reproducibility within 30% of the voxel size across all the field of view. Example images obtained during animal experiments are also shown.

  13. Performance evaluation of the CT component of the IRIS PET/CT preclinical tomograph

    International Nuclear Information System (INIS)

    Panetta, Daniele; Belcari, Nicola; Tripodi, Maria; Burchielli, Silvia; Salvadori, Piero A.; Del Guerra, Alberto

    2016-01-01

    In this paper, we evaluate the physical performance of the CT component of the IRIS scanner, a novel combined PET/CT scanner for preclinical imaging. The performance assessment is based on phantom measurement for the determination of image quality parameters (spatial resolution, linearity, geometric accuracy, contrast to noise ratio) and reproducibility in dynamic (4D) imaging. The CTDI_1_0_0 has been measured free in air with a pencil ionization chamber, and the animal dose was calculated using Monte Carlo derived conversion factors taken from the literature. The spatial resolution at the highest quality protocol was 6.9 lp/mm at 10% of the MTF, using the smallest reconstruction voxel size of 58.8 μm. The accuracy of the reconstruction voxel size was within 0.1%. The linearity of the CT numbers as a function of the concentration of iodine was very good, with R"2>0.996 for all the tube voltages. The animal dose depended strongly on the scanning protocol, ranging from 158 mGy for the highest quality protocol (2 min, 80 kV) to about 12 mGy for the fastest protocol (7.3 s, 80 kV). In 4D dynamic modality, the maximum scanning rate reached was 3.1 frames per minute, using a short-scan protocol with 7.3 s of scan time per frame at the isotropic voxel size of 235 μm. The reproducibility of the system was high throughout the 10 frames acquired in dynamic modality, with a standard deviation of the CT values of all frames <8 HU and an average spatial reproducibility within 30% of the voxel size across all the field of view. Example images obtained during animal experiments are also shown.

  14. Evaluation of steam-to-sodium leak detectors in the sodium components test installation (SCTI)

    Energy Technology Data Exchange (ETDEWEB)

    McKee, J M; Simmons, W R

    1975-07-01

    Two nickel diffusion-membrane type hydrogen detectors were installed in the secondary sodium system of the Sodium Components Test Installation and evaluated during the 12-month performance test of the Modular Steam Generator (MSG). Hydrogen in the expansion tank cover gas was monitored with a gas chromatograph. During this period, numerous steam and hydrogen injections were made, simulating steam leaks into the sodium of an LMFBR steam generator. The response of the detectors was evaluated for leak sizes ranging from 10{sup -6} to 10{sup -4} 1b H{sub 2}O/sec, injection periods of 0.5 to 300 min, secondary sodium flow rates of 0.2 x 10{sup 6} to 1.5 x 10{sup 6} 1b/hr, and sodium temperatures of 400 to 950 deg. F. The response of the leak detection system was influenced significantly by two regimes of sodium temperature. Below 600 deg. F, the cover gas hydrogen detector gave the largest response; this is attributed to the long dissolution time of hydrogen bubbles relative to the transit time of hydrogen to the expansion tank. Above 600 deg. F, the hydrogen apparently dissolved rapidly and the detectors were much more effective in the sodium than in the cover gas. At least 75% of the hydrogen and 50% of the oxygen content of injected steam appeared as detectable activity if the reaction products were dispersed in the sodium stream and the sodium was above 600 deg. F. Hydrogen injections into semi-stagnant sodium at the MSG tube sheets were detected with better sensitivity than steam injections into the main sodium stream. It appeared that high local concentrations of hydrogen were quickly carried to the nearest detector by upward currents created by the injected gas. The alarm system functioned as expected, 2.1 ppb/min being the smallest rate-of-rise in hydrogen concentration to give an automatic alarm. With more sensitive rate-of-rise alarm settings, leaks as small as 2 x 10{sup -5} 1b H{sub 2}O/sec could be detected in a system such as the Clinch River Breeder

  15. Evaluation of steam-to-sodium leak detectors in the sodium components test installation (SCTI)

    International Nuclear Information System (INIS)

    McKee, J.M.; Simmons, W.R.

    1975-01-01

    Two nickel diffusion-membrane type hydrogen detectors were installed in the secondary sodium system of the Sodium Components Test Installation and evaluated during the 12-month performance test of the Modular Steam Generator (MSG). Hydrogen in the expansion tank cover gas was monitored with a gas chromatograph. During this period, numerous steam and hydrogen injections were made, simulating steam leaks into the sodium of an LMFBR steam generator. The response of the detectors was evaluated for leak sizes ranging from 10 -6 to 10 -4 1b H 2 O/sec, injection periods of 0.5 to 300 min, secondary sodium flow rates of 0.2 x 10 6 to 1.5 x 10 6 1b/hr, and sodium temperatures of 400 to 950 deg. F. The response of the leak detection system was influenced significantly by two regimes of sodium temperature. Below 600 deg. F, the cover gas hydrogen detector gave the largest response; this is attributed to the long dissolution time of hydrogen bubbles relative to the transit time of hydrogen to the expansion tank. Above 600 deg. F, the hydrogen apparently dissolved rapidly and the detectors were much more effective in the sodium than in the cover gas. At least 75% of the hydrogen and 50% of the oxygen content of injected steam appeared as detectable activity if the reaction products were dispersed in the sodium stream and the sodium was above 600 deg. F. Hydrogen injections into semi-stagnant sodium at the MSG tube sheets were detected with better sensitivity than steam injections into the main sodium stream. It appeared that high local concentrations of hydrogen were quickly carried to the nearest detector by upward currents created by the injected gas. The alarm system functioned as expected, 2.1 ppb/min being the smallest rate-of-rise in hydrogen concentration to give an automatic alarm. With more sensitive rate-of-rise alarm settings, leaks as small as 2 x 10 -5 1b H 2 O/sec could be detected in a system such as the Clinch River Breeder Reactor Plant. A preliminary

  16. City of Flagstaff Project: Ground Water Resource Evaluation, Remote Sensing Component

    Science.gov (United States)

    Chavez, Pat S.; Velasco, Miguel G.; Bowell, Jo-Ann; Sides, Stuart C.; Gonzalez, Rosendo R.; Soltesz, Deborah L.

    1996-01-01

    (that is, vegetation and/or soil type). The spatial information gives the distribution, variation, and topographic relief of the cover types from pixel to pixel. Therefore, the main characteristics that determine a pixel's brightness/reflectance and, consequently, the digital number (DN) assigned to the pixel, are the physical properties of the surface and near surface, the cover type, and the topographic slope. In this application, the ability to detect and map lineaments, especially those related to fractures and faults, is critical. Therefore, the extraction of spatial information from the digital images was of prime interest in this project. The spatial information varies among the different spectral bands available; in particular, a near infrared spectral band is better than a visible band when extracting spatial information in highly vegetated areas. In this study, both visible and near infrared bands were analyzed and used to extract the desired spatial information from the images. The wide swath coverage of remotely sensed satellite digital images makes them ideal for regional analysis and mapping. Since locating and mapping highly fractured and faulted areas is a major requirement for ground water resource evaluation and exploration this aspect of satellite images was considered critical; it allowed us to stand back (actually up about 440 miles), look at, and map the regional structural setting of the area. The main focus of the remote sensing and digital image processing component of this project was to use both remotely sensed digital satellite images and a Digital Elevation Model (DEM) to extract spatial information related to the structural and topographic patterns in the area. The data types used were digital satellite images collected by the United States' Landsat Thematic Mapper (TM) and French Systeme Probatoire d'Observation de laTerre (SPOT) imaging systems, along with a DEM of the Flagstaff region. The USGS Mini Image Processing Sy

  17. [Construction of abridged life table for health evaluation of local resident using Excel program].

    Science.gov (United States)

    Chen, Qingsha; Wang, Feng; Li, Xiaozhen; Yang, Jian; Yu, Shouyi; Hu, Jun

    2012-05-01

    To provide an easy computational tool for evaluating the health condition of local residents. An abridged life table was programmed by applying mathematical functions and formula in Excel program and tested with the real study data to evaluate the results computed. The Excel was capable of computing group death probability of age in the life table ((n)q(x)), number of survivors (l(x)), number of death ((n)d(x)), survival per person-year ((n)L(x)), survival total per person-year (T(x)) and life expectancy (e(x)). The calculated results were consistent with those by SAS. The abridged life table constructed using Microsoft Excel can conveniently and accurately calculate the relevant indices for evaluating the health condition of the residents.

  18. Radiation damage and life-time evaluation of RBMK graphite stack

    Energy Technology Data Exchange (ETDEWEB)

    Platonov, P A; Chugunov, O K; Manevsky, V N; Karpukhin, V I [Russian Research Centre Kurchatov Inst., Moscow (Russian Federation). Reactor Material Div.

    1996-08-01

    At the present time there are 11 NPP units with RBMK reactors in operation in Russia, with the oldest now in operation 22 years. Design life-time of the RBMK-1000 reactor is 30 years. This paper addresses the evaluation of RBMK graphite stack life-time. It is the practice in Russia to evaluate the reliability of the channel reactor graphite stack using at least three criteria: degradation of physical-mechanical properties of graphite, preservation of the graphite brick integrity, and degradation of the graphite stack as a structure. Stack life-time evaluation by different criteria indicates that the most realistic approach may be realized on the basis of the criteria of brick cracking and degradation of the graphite stack as a structure. The RBMK reactor graphite stack life-time depends on its temperature and for different units it may be different. (author). 2 refs, 10 figs.

  19. Evaluation and silicon nitride internal combustion engine components. Final report, Phase I

    Energy Technology Data Exchange (ETDEWEB)

    Voldrich, W. [Allied-Signal Aerospace Co., Torrance, CA (United States). Garrett Ceramic Components Div.

    1992-04-01

    The feasibility of silicon nitride (Si{sub 3}N{sub 4}) use in internal combustion engines was studied by testing three different components for wear resistance and lower reciprocating mass. The information obtained from these preliminary spin rig and engine tests indicates several design changes are necessary to survive high-stress engine applications. The three silicon nitride components tested were valve spring retainers, tappet rollers, and fuel pump push rod ends. Garrett Ceramic Components` gas-pressure sinterable Si{sub 3}N{sub 4} (GS-44) was used to fabricate the above components. Components were final machined from densified blanks that had been green formed by isostatic pressing of GS-44 granules. Spin rig testing of the valve spring retainers indicated that these Si{sub 3}N{sub 4} components could survive at high RPM levels (9,500) when teamed with silicon nitride valves and lower spring tension than standard titanium components. Silicon nitride tappet rollers showed no wear on roller O.D. or I.D. surfaces, steel axles and lifters; however, due to the uncrowned design of these particular rollers the cam lobes indicated wear after spin rig testing. Fuel pump push rod ends were successful at reducing wear on the cam lobe and rod end when tested on spin rigs and in real-world race applications.

  20. Presenteeism In Work Life: An Evaluation In Hotel Industry

    Directory of Open Access Journals (Sweden)

    Ebru Arslaner

    2015-12-01

    Full Text Available This study aims to examine presenteeism problem encountered in businesses frequently and evaluate this issue for hotel enterprises. Presenteeism is defined as when an employee shows up for work even though he or she is sick and performs ineffectively. Thus, it causes great costs for companies due to ineffective work performance. This situation arises in hotel businesses due to labor-intensive features of industry. It is considered that the intensity of human relationships and long shifts in hotel businesses induce stressfull working conditions and that factors increase presenteeism. Businesses could produce solutions for presenteeism with practices that prioritise employees satisfaction and take precautions to remedy physical and mental health of employees.

  1. The optimum measurement precision evaluation for blood components using near-infrared spectra on 1000-2500 nm

    Science.gov (United States)

    Zhang, Ziyang; Sun, Di; Han, Tongshuai; Guo, Chao; Liu, Jin

    2016-10-01

    In the non-invasive blood components measurement using near infrared spectroscopy, the useful signals caused by the concentration variation in the interested components, such as glucose, hemoglobin, albumin etc., are relative weak. Then the signals may be greatly disturbed by a lot of noises in various ways. We improved the signals by using the optimum path-length for the used wavelength to get a maximum variation of transmitted light intensity when the concentration of a component varies. And after the path-length optimization for every wavelength in 1000-2500 nm, we present the detection limits for the components, including glucose, hemoglobin and albumin, when measuring them in a tissue phantom. The evaluated detection limits could be the best reachable precision level since it assumed the measurement uses a high signal-to-noise ratio (SNR) signal and the optimum path-length. From the results, available wavelengths in 1000-2500 nm for the three component measurements can be screened by comparing their detection limit values with their measurement limit requirements. For other blood components measurement, the evaluation their detection limits could also be designed using the method proposed in this paper. Moreover, we use an equation to estimate the absorbance at the optimum path-length for every wavelength in 1000-2500 nm caused by the three components. It could be an easy way to realize the evaluation because adjusting the sample cell's size to the precise path-length value for every wavelength is not necessary. This equation could also be referred to other blood components measurement using the optimum path-length for every used wavelength.

  2. Galaxy Makers Exhibition: Re-engagement, Evaluation and Content Legacy through an Online Component

    Science.gov (United States)

    Borrow, J.; Harrison, C.

    2017-09-01

    For the Royal Society Summer Science Exhibition 2016, Durham University's Institute of Computational Cosmology created the Galaxy Makers exhibit to communicate our computational cosmology and astronomy research. In addition to the physical exhibit we created an online component to foster re-engagement, create a permanent home for our content and allow us to collect important information about participation and impact. Here we summarise the details of the exhibit and the degree of success attached to the online component. We also share suggestions for further uses and improvements that could be implemented for the online components of other science exhibitions.

  3. A study of the daily life of modern teenagers: the presence in social networks as an integral component of communication

    Directory of Open Access Journals (Sweden)

    Koroleva D.O.

    2016-06-01

    Full Text Available The article introduces the methodologies of the study of the everyday life of modern teenagers whiсh can simultaneously be used to traceevents occurring in real and virtual space: “Online and offline diary" and "15 minutes". The data of pilot studies showed that the teenager’s online performance is mainly presented in a form of communication in social networks. We have discovered that the on- and offline convergence of space for growth is inseparable from respondents themselves. Through the active use of social networks, a modern teenager is able to be present in different socialenvironments simultaneously. Constant checking news and posts in social networks is a new, peculiar to teenage daily ritual. The so-called "red zones", where a teenager consciously waives the possibility of "escape" into a parallel reality, are linked to significant events in everyday life, while a feeling of boredom brings to life the compensation through "getting about" in virtual space.

  4. RACLETTE: a model for evaluating the thermal response of plasma facing components to slow high power plasma transients. Pt. II. Analysis of ITER plasma facing components

    International Nuclear Information System (INIS)

    Federici, G.; Raffray, A.R.

    1997-01-01

    For pt.I see ibid., p.85-100, 1997. The transient thermal model RACLETTE (acronym of Rate Analysis Code for pLasma Energy Transfer Transient Evaluation) described in part I of this paper is applied here to analyse the heat transfer and erosion effects of various slow (100 ms-10 s) high power energy transients on the actively cooled plasma facing components (PFCs) of the International Thermonuclear Experimental Reactor (ITER). These have a strong bearing on the PFC design and need careful analysis. The relevant parameters affecting the heat transfer during the plasma excursions are established. The temperature variation with time and space is evaluated together with the extent of vaporisation and melting (the latter only for metals) for the different candidate armour materials considered for the design (i.e., Be for the primary first wall, Be and CFCs for the limiter, Be, W, and CFCs for the divertor plates) and including for certain cases low-density vapour shielding effects. The critical heat flux, the change of the coolant parameters and the possible severe degradation of the coolant heat removal capability that could result under certain conditions during these transients, for example for the limiter, are also evaluated. Based on the results, the design implications on the heat removal performance and erosion damage of the various ITER PFCs are critically discussed and some recommendations are made for the selection of the most adequate protection materials and optimum armour thickness. (orig.)

  5. RACLETTE: a model for evaluating the thermal response of plasma facing components to slow high power plasma transients. Part II: Analysis of ITER plasma facing components

    Science.gov (United States)

    Federici, Gianfranco; Raffray, A. René

    1997-04-01

    The transient thermal model RACLETTE (acronym of Rate Analysis Code for pLasma Energy Transfer Transient Evaluation) described in part I of this paper is applied here to analyse the heat transfer and erosion effects of various slow (100 ms-10 s) high power energy transients on the actively cooled plasma facing components (PFCs) of the International Thermonuclear Experimental Reactor (ITER). These have a strong bearing on the PFC design and need careful analysis. The relevant parameters affecting the heat transfer during the plasma excursions are established. The temperature variation with time and space is evaluated together with the extent of vaporisation and melting (the latter only for metals) for the different candidate armour materials considered for the design (i.e., Be for the primary first wall, Be and CFCs for the limiter, Be, W, and CFCs for the divertor plates) and including for certain cases low-density vapour shielding effects. The critical heat flux, the change of the coolant parameters and the possible severe degradation of the coolant heat removal capability that could result under certain conditions during these transients, for example for the limiter, are also evaluated. Based on the results, the design implications on the heat removal performance and erosion damage of the variuos ITER PFCs are critically discussed and some recommendations are made for the selection of the most adequate protection materials and optimum armour thickness.

  6. Evaluation of runaway-electron effects on plasma-facing components for NET

    Science.gov (United States)

    Bolt, H.; Calén, H.

    1991-03-01

    Runaway electrons which are generated during disruptions can cause serious damage to plasma facing components in a next generation device like NET. A study was performed to quantify the response of NET plasma facing components to runaway-electron impact. For the determination of the energy deposition in the component materials Monte Carlo computations were performed. Since the subsurface metal structures can be strongly heated under runaway-electron impact from the computed results damage threshold values for the thermal excursions were derived. These damage thresholds are strongly dependent on the materials selection and the component design. For a carbonmolybdenum divertor with 10 and 20 mm carbon armour thickness and 1 degree electron incidence the damage thresholds are 100 MJ/m 2 and 220 MJ/m 2. The thresholds for a carbon-copper divertor under the same conditions are about 50% lower. On the first wall damage is anticipated for energy depositions above 180 MJ/m 2.

  7. Evaluation of beam-line components for use in a large neutral-beam injector

    International Nuclear Information System (INIS)

    Fink, J.H.

    1977-01-01

    A conceptual model of a neutral-beam injector was used to examine the effect of beam-line components on reactor performance. Criteria were established to optimize a reactor's reliability and minimize its cost

  8. Enhancement of nondestructive evaluation techniques for magnetic and nonmagnetic structural components (Final report for doctoral fellowship)

    International Nuclear Information System (INIS)

    Chen, Zhenmao

    2000-03-01

    In this report, research works performed in the Structural Safety Engineering Group of OEC/JNC are summarized as the final report of the doctoral fellowship. The main objective of this study is for the enhancement of the nondestructive evaluation techniques for structural components of both magnetic and nonmagnetic material. Studies in three topics have been carried out aiming at the quantitative evaluation of crack with the eddy current testing and the validation of a natural magnetic field based NDE method for detecting mechanical damages in a paramagnetic material. In the first part of the study, an approach to the reconstruction of the natural crack was proposed and implemented with an idealized crack model for its validation. In the second part, the correlation of the natural magnetization and the mechanical damages in the SUS304 stainless steel was investigated by using an experimental approach. In part 3, an inverse method of the measured magnetic fields is proposed for the reconstruction of magnetic charges in the inspected material by using an optimization method and wavelet. As the first work, an approach to the reconstruction of an idealized natural crack of non-vanishing conductivity is proposed with use of signals of eddy current testing. Two numerical models are introduced at first for modeling the natural crack in order to represented it with a set of crack parameters. A method for the rapid prediction of the eddy current testing signals coming from these idealized cracks is given then by extending a knowledge based fast forward solver to the case of a non-vanishing conductivity. Based on this fast forward solver, the inverse algorithm of conjugate gradient method is updated to identify the crack parameters. Several examples are presented finally as a validation of the proposed strategy. The results show that both the two numerical models can give reasonable reconstruction results for signal of low noise. The model concerning the touch of crack

  9. Evaluation of remaining life of the double-shell tank waste systems

    International Nuclear Information System (INIS)

    Schwenk, E.B.

    1995-01-01

    A remaining life assessment of the DSTs (double-shell tanks) and their associated waste transfer lines, for continued operation over the next 10 years, was favorable. The DST assessment was based on definition of significant loads, evaluation of data for possible material degradation and geometric changes and evaluation of structural analyses. The piping assessment was based primarily on service experience

  10. Evaluation of remaining life of the double-shell tank waste systems

    Energy Technology Data Exchange (ETDEWEB)

    Schwenk, E.B.

    1995-05-04

    A remaining life assessment of the DSTs (double-shell tanks) and their associated waste transfer lines, for continued operation over the next 10 years, was favorable. The DST assessment was based on definition of significant loads, evaluation of data for possible material degradation and geometric changes and evaluation of structural analyses. The piping assessment was based primarily on service experience.

  11. How Reliable Are Students' Evaluations of Teaching Quality? A Variance Components Approach

    Science.gov (United States)

    Feistauer, Daniela; Richter, Tobias

    2017-01-01

    The inter-rater reliability of university students' evaluations of teaching quality was examined with cross-classified multilevel models. Students (N = 480) evaluated lectures and seminars over three years with a standardised evaluation questionnaire, yielding 4224 data points. The total variance of these student evaluations was separated into the…

  12. Evaluation of the quality of life of pregnant women from 2005 to 2015.

    Science.gov (United States)

    Morin, M; Vayssiere, C; Claris, O; Irague, F; Mallah, S; Molinier, L; Matillon, Y

    2017-07-01

    Over the past two decades, quality of life has become an essential preoccupation in the care of patients. Many measuring instruments are available to assess physical, psychological and social quality of life. These tools allow healthcare professionals to determine the best quality of their patients. However, the quality of life for the pregnant woman seems to be little studied. This article presents the results of a bibliographic review of publications between 2005 and 2015 - referenced in PUBMED and COCHRANE - on the quality of life of pregnant women giving birth after the 22nd week of amenorrhea. The articles were selected by a reading committee. 195 publications responding to keywords were identified. 75 articles on the problem were selected. The main countries that have published on this subject are Iran (n=11) and Brazil (n=9). France ranks 17th with only one publication. 74% of articles deal with quality of life for pathological pregnancies (gestational or pre-existing pathologies). 23 pathologies were identified, mainly depression (20% of items). This review reveals a growing global interest in quality of life in pregnant women. However, few studies evaluate the impact of care in terms of quality of life in pregnant women, contrary to the recommendations of different health authorities. Finally, the analysis of the various articles shows that, in general, few measurements are made to evaluate the quality of life, not requiring a standardized curve of quality of life during pregnancy. There is thus a significant lack of data to establish a standardized curve for the quality of life of pregnant women, which allows a simple comparison of quality of life measures according to the different clinical management. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Overview and Evaluation of the NESC Projects for Fracture Assessments of Nuclear Components

    International Nuclear Information System (INIS)

    Sattari-Far, Iradj; Lorentzon, Mikael

    2011-02-01

    The overall objective of the NESC network has been to examine the reliability of the entire process of structural integrity assessment within an international framework. Within this network, six projects were conducted under the period of 1993-2008. The main targets of these projects were: NESC-I: This project evaluated the interactions among various technical disciplines applied to the integrity assessment of a large-scale thermally shocked spinning cylinder experiment. The cylinder test was designed to simulate selected conditions associated with an ageing flawed reactor pressure vessel. NESC-II: This project was on brittle crack initiation, propagation and arrest of shallow cracks in clad vessels under PTS loading. The results of this project underlined the conservatism of existing defects assessment procedures for shallow RPV flaws. NESC-III: This project was to quantify the accuracy of structural integrity assessment procedures for defects in dissimilar welds. The project was built around the conducted ADIMEW-project to share its overall objectives and to provide additional input. NESC-IV: This project was an experimental/analytical program to develop validated analysis methods for transferring fracture toughness data generated on standard test specimens to shallow flaws in reactor pressure vessel welds subject to biaxial loading in the lower-transition temperature region. NESC-V: This project aimed to develop a European multi-level procedure for handling of thermal fatigue phenomena in the nuclear power plant components. It also aimed to create a database of service and mock-up data for better understanding of thermal fatigue damage mechanisms. NESC-VI: This project was an extension of the NESC-IV project. Embedded subclad racks in beam specimens under uniaxial loading were studied to study the transferability of fracture toughness data between different crack configurations. This report gives an overview report of these six NESC projects. The reports cover

  14. Development of the Chinese version of Meaning in Life Scale for cancer patients and psychometric evaluation.

    Science.gov (United States)

    Xia, Hao-Zhi; Gao, Lei; Wang, Yang; Song, Hui; Shi, Bao-Xin

    2017-11-01

    To develop a Meaning in Life Scale for cancer patients in Chinese version and to test the validity and reliability. Meaning in life is a protective factor of psychological well-being and is negatively related to depression and demoralisation among cancer patients. The existing scales measuring meaning in life are mostly designed in English and there is no scale designed for Chinese cancer patients based on Chinese cultural background. Process of instrument development and psychometric evaluation were used. Items were generated from literature review and a focus group interview. Delphi technique was used to test the content validity. Item analysis and exploratory factor analysis were performed with data from 251 cancer patients. The internal consistency of the scale was tested by Cronbach's alpha. A 25-item Meaning in Life Scale in Chinese version with five domains was developed. The five factors explained 62·686% of the variance. The Cronbach's alpha for the total scale was 0·897. The Meaning in Life Scale in Chinese version has acceptable internal consistency reliability and good content validity and acceptable construct validity. The content of the scale reflected the attitudes of cancer patients towards meaning in life based on Chinese cultural background. The Chinese version of Meaning in Life Scale for Cancer Patients appears to be a new scale to assess meaning in life among Chinese cancer patients exactly and the concept of meaning in life presented in this scale provides new ideas of meaning intervention in routine clinical practice. © 2016 John Wiley & Sons Ltd.

  15. Design & Evaluation of a Protection Algorithm for a Wind Turbine Generator based on the fault-generated Symmetrical Components

    DEFF Research Database (Denmark)

    Zheng, T. Y.; Cha, Seung-Tae; Lee, B. E.

    2011-01-01

    A protection relay for a wind turbine generator (WTG) based on the fault-generated symmetrical components is proposed in the paper. At stage 1, the relay uses the magnitude of the positive-sequence component in the fault current to distinguish faults on a parallel WTG, connected to the same feeder......, or on an adjacent feeder from those on the connected feeder, on the collection bus, at an inter-tie or at a grid. For the former faults, the relay should remain stable and inoperative whilst the instantaneous or delayed tripping is required for the latter faults. At stage 2, the fault type is first evaluated using...... the relationships of the fault-generated symmetrical components. Then, the magnitude of the positive-sequence component in the fault current is used again to decide on either instantaneous or delayed operation. The operating performance of the relay is then verified using various fault scenarios modelled using...

  16. Functional remediation components: A conceptual method of evaluating the effects of remediation on risks to ecological receptors.

    Science.gov (United States)

    Burger, Joanna; Gochfeld, Michael; Bunn, Amoret; Downs, Janelle; Jeitner, Christian; Pittfield, Taryn; Salisbury, Jennifer

    2016-01-01

    Governmental agencies, regulators, health professionals, tribal leaders, and the public are faced with understanding and evaluating the effects of cleanup activities on species, populations, and ecosystems. While engineers and managers understand the processes involved in different remediation types such as capping, pump and treat, and natural attenuation, there is often a disconnect between (1) how ecologists view the influence of different types of remediation, (2) how the public perceives them, and (3) how engineers understand them. The overall goal of the present investigation was to define the components of remediation types (= functional remediation). Objectives were to (1) define and describe functional components of remediation, regardless of the remediation type, (2) provide examples of each functional remediation component, and (3) explore potential effects of functional remediation components in the post-cleanup phase that may involve continued monitoring and assessment. Functional remediation components include types, numbers, and intensity of people, trucks, heavy equipment, pipes, and drill holes, among others. Several components may be involved in each remediation type, and each results in ecological effects, ranging from trampling of plants, to spreading invasive species, to disturbing rare species, and to creating fragmented habitats. In some cases remediation may exert a greater effect on ecological receptors than leaving the limited contamination in place. A goal of this conceptualization is to break down functional components of remediation such that managers, regulators, and the public might assess the effects of timing, extent, and duration of different remediation options on ecological systems.

  17. EVALUASI MODEL-MODEL PENDUGAAN UMUR SIMPAN PANGAN DARI DIFUSI HUKUM FICK UNIDIREKSIONAL EVALUATION OF SHELF-LIFE EQUATION MODELS DERIVED FROM UNIDIRECTIONAL FICK’S LAW

    Directory of Open Access Journals (Sweden)

    M. Arpah

    2000-04-01

    Full Text Available The aim of this research was to study the variation of shelf-life values, obtained in quantifying shelf-life of biscuits among models of accelerated storage studies (ASS from unidirectional Fick’S law. Shelf-life of biscuits is defined as the length of time of a packaged biscuits can be stored before the onset quality change appears.Four models: Heiss-Eichner (1971, Labuza (1983, Rudolph (1986 and Half Value Period or HVP model (Syarief, 1986 were evaluated. These models shared a common basic principle that they were all derived and developed from unidirectional Fick’s law. Therefore, each parameter of individual model can be compared to the athers. A semi empirical approach using reaction kinetics through Arrhenius plot was used as a real shelf-life values.Quantification resulted in two categories of shelf-life values, First those which higher than expected value and second, were lower than expected. Parameter evaluation of components of Heiss-Eichner and Labuza models clearly shown less in number than components of Rudolph and HVP models. This led to a conclusion that the more sophisticated models gave higher shelf-life values as compared to the Arhenius model.

  18. THE DISTRIBUTION OF ORGANIC CARBON IN MAJOR COMPONENTS OF FORESTS LOCATED IN FIVE LIFE ZONES OF VENEZUELA

    Science.gov (United States)

    One of the major uncertainties concerning the role of tropical forests in the global carbon cycle is the lack of adequate data on the carbon content of all their components. The goal of this study was to contribute to filling this data gap by estimating the quantity of carbon in ...

  19. The influence of hydrogen on the fatigue life of metallic leaf spring components in a vacuum environment

    NARCIS (Netherlands)

    Kouters, M.H.M.; Slot, H.M.; Zwieten, W. van; Veer, J. van der

    2014-01-01

    Hydrogen is used as a process gas in vacuum environments for semiconductor manufacturing equipment. If hydrogen dissolves in metallic components during operation it can result in hydrogen embrittlement. In order to assess if hydrogen embrittlement occurs in such a vacuum environment a special

  20. ALIAS an innovative intranet-system for the remaining life analysis of systems and components; ALIAS - ein innovatives Intranet-System zur Restlebensdaueranalyse von Systemen und Bauteilen

    Energy Technology Data Exchange (ETDEWEB)

    Jovanovic, A S; Schweikhard, T [Stuttgart Univ. (Germany). Staatliche Materialpruefungsanstalt; Balos, D [Stuttgart Univ. (Germany). Staatliche Materialpruefungsanstalt; [Grosskraftwerk Mannheim AG (Germany)

    1998-11-01

    The paper describes an innovative and advanced system for remaining life assessment of industrial high-temperature components developed at MPA Stuttgart, Germany and being currently introduced into the power plants in Germany and in several other countries. The system is a corporate memory system, essentially meaning that all the information/knowledge of a corporation (company, institute, etc.) should be maximally exploited in future activities of the company, with minimum changes in the existing structure of the data/information/knowledge already available. The system has two main aspects of practical implementation: (a) the organizational one, represented by MPA LifeTech, and (b) the software system one represented by the ``parent systems`` WISDOM and (WISDOM - WWW-based Intelligent System for Data and Documentation Management, ALIAS - The Advanced modular intelligent Life Assessment Software System). (orig.) [Deutsch] Das Papier beschreibt ein innovatives und fortschrittliches Softwaresystem, das an der MPA Stuttgart entwickelt wurde und bei mehreren europaeischen und deutschen Kraftwerksbetreibern eingefuehrt wird. Das Konzept beruht auf der Idee von s.g. corporate memory systems mit der Zielsetzung, die gesamte Bandbreite an Informationen und Wissen eines Unternehmens (Firma, Institution usw.) fuer dessen zukuenftige Aktivitaeten optimal zu nutzen. Die bestehende Struktur der bereits vorhandenen Daten sollte dabei nur geringfuegig geaendert werden muessen. Zur praktischen Durchfuehrung des Konzepts sind zwei Aspekte von Bedeutung: die Organisation (MPA LifeTech) und das Softwaresystem bzw. Systeme WISDOM und ALIAS (WISDOM - WWW-based Intelligent System for Data and Documentation Management, ALIAS - The Advanced modular Intelligent Life Assessment Software System). (orig.)

  1. Evaluation of Environmental Impacts for Rice Agroecosystems using Life Cycle Assessment (LCA)

    OpenAIRE

    S. Khoramdel; J. Shabahang; A. Amin Ghafouri

    2017-01-01

    In order to evaluate life cycle assessment (LCA) for rice agroecosystems based on mean of nitrogen fertilizer levels (less than 190, 190-200, 200-210, 210-220 and more than 220 kg N ha) during 1999-2012, an experiment was conducted. Four steps includung goal definition and scoping, inventory analysis, life cycle impact assessment and integration and interpretation were computed. Functional unit was considered as one tone paddy. Impact categories were acidification, eutrophication in aquatic a...

  2. Evaluation of Component Failure Data of the Operating Nuclear Power Plants in Korea Based on NUREG/CR-6928

    International Nuclear Information System (INIS)

    Jeon, Hojun; Na, Janghwan; Shin, Taeyoung

    2014-01-01

    This paper focuses on ensuring the quality of component failure data. When performing data analysis in PSA, we have customized the component failure data based on Bayesian analysis using plant specific experiences and the generic data of Advanced Light Water Reactor Utility Requirements Document (ALWR URD). However, ALWR URD was established by collecting US nuclear power plant (NPP) practices from mid 1980s to early 1990s. We analyzed the component failure data using the raw data of component failures in Pressurized Water Reactor (PWR) plants by 2012. This paper presents the results from analyzing the component failure data based on the new generic data and the latest specific failure data. We also compare the new component failure data to the existing data of PSA models, and evaluate the risk impacts by applying the new data to the PSA models of reference NPPs in this paper. To apply the new generic data source to PSA models, we reviewed and compared NUREG/CR-6928 and the existing generic data source, ALWR URD. In addition, we analyzed the component failure data generated from 16 PWR plants by the end of 2012, and performed the Bayesian update with these raw data based on the new generic data source of NUREG/CR-6928. Also, we reviewed the PSA models of the reference NPP, and identified some important components to CDF. The failure data of the major components decreased in general by applying the new generic data and the latest plant specific data. As a result, the CDF of the reference NPP decreased over 30% compared to the value of the existing CDF

  3. Evaluation of the Inductive Coupling between Equivalent Emission Sources of Components

    Directory of Open Access Journals (Sweden)

    Moisés Ferber

    2012-01-01

    Full Text Available The electromagnetic interference between electronic systems or between their components influences the overall performance. It is important thus to model these interferences in order to optimize the position of the components of an electronic system. In this paper, a methodology to construct the equivalent model of magnetic field sources is proposed. It is based on the multipole expansion, and it represents the radiated emission of generic structures in a spherical reference frame. Experimental results for different kinds of sources are presented illustrating our method.

  4. Systematic Evaluation Strategies for Innovative Programs in Health Professions Education: Need, Function and Components.

    Science.gov (United States)

    Taft, Thomas B., Jr.; Logan, Nelson S.

    As change occurs in various health sciences programs, evaluational strategies should be developed so that adaptive decisions may be made. Evaluation models taking into account inputs, methodology, and outputs (Stake, 1967, and Astin and Panes, 1971) need examination. Alternative measurement instruments for formative and summative evaluations,…

  5. The Relationship of Core Self-Evaluations and Life Satisfaction in College Students with Disabilities: Evaluation of a Mediator Model

    Science.gov (United States)

    Smedema, Susan Miller; Chan, Fong; Yaghmaian, Rana A.; Cardoso, Elizabeth DaSilva; Muller, Veronica; Keegan, John; Dutta, Alo; Ebener, Deborah J.

    2015-01-01

    This study examined the factorial structure of the construct core self-evaluations (CSE) and tested a mediational model of the relationship between CSE and life satisfaction in college students with disabilities. We conducted a quantitative descriptive design using exploratory and confirmatory factor analysis and multiple regression analysis.…

  6. Use of on-line fatigue monitoring of nuclear reactor components as a tool for plant life extension

    International Nuclear Information System (INIS)

    Stevens, G.L.; Ranganath, S.

    1991-01-01

    In this paper the application of an on-line fatigue monitoring system for tracking fatigue usage in operating power plants is described. The system, like several others which have been developed, uses the influence function approach, operates on a microcomputer, and determines component stresses using temperature, pressure, and flow rate data that are typically available from plant computers. Using plant-unique influence functions developed specifically for each component location, the system calculates stresses as a function of time and computes the fatigue usage. Stress values are calculated at time internals defined by the user and the fatigue values are saved on files for use at a later time. The application of the GE Fatigue Monitoring System (GEFMS) to calculate fatigue usage in the feedwater nozzle of a GE boiling Water Reactor is described in this paper

  7. Evaluation of Hose in Hose Transfer Line Service Life for Hanford's Interim Stabilization Program

    International Nuclear Information System (INIS)

    TORRES, T.D.

    2000-01-01

    RPP-6153, Engineering Task Plan for Hose-in-Hose Transfer System for the Interim Stabilization Program, defines the programmatic goals, functional requirements, and technical criteria for the development and subsequent installation of transfer line equipment to support Hanford's Interim Stabilization Program. RPP-6028, Specification for Hose in Hose Transfer Lines for Hanford's Interim Stabilization Program, has been issued to define the specific requirements for the design, manufacture, and verification of transfer line assemblies for specific waste transfer applications. Included in RPP-6028 are tables defining the chemical constituents of concern to which transfer lines will be exposed. Current Interim Stabilization Program planning forecasts that the at-grade transfer lines will be required to convey pumpable waste for as much as three years after commissioning. Prudent engineering dictates that the equipment placed in service have a working life in excess of this forecasted time period, with some margin to allow for future adjustments to the planned schedule. This document evaluates the effective service life of the Hose-in-Hose Transfer Lines, based on information submitted by the manufacturer and published literature. The effective service life of transfer line assemblies is a function of several factors. Foremost among these are process fluid characteristics, ambient environmental conditions, and the manufacturer's stated shelf life. This evaluation examines the manufacturer's certification of shelf life, the manufacturer's certifications of chemical compatibility with waste, and published literature on the effects of exposure to ionizing radiation on the mechanical properties of elastomeric materials to evaluate transfer line service life

  8. Evaluation of an international doctoral educational program in space life sciences: The Helmholtz Space Life Sciences Research School (SpaceLife) in Germany

    Science.gov (United States)

    Hellweg, C. E.; Spitta, L. F.; Kopp, K.; Schmitz, C.; Reitz, G.; Gerzer, R.

    2016-01-01

    documented. The applicants' statistics revealed that personal contacts and the DLR website were most important the recruitment of doctoral candidates. The evaluation of the application and selection procedure revealed that prediction of thesis success based on master thesis mark or evaluation by the selection committee is difficult. SpaceLife Doctoral Students greatly contributed to the scientific output in terms of peer-reviewed publications of the Institute of Aerospace Medicine with a peak in the fourth year after start of the thesis and they continuously received awards for their scientific work.

  9. Evaluation of skin melanoma in spectral range 450-950 nm using principal component analysis

    Science.gov (United States)

    Jakovels, D.; Lihacova, I.; Kuzmina, I.; Spigulis, J.

    2013-06-01

    Diagnostic potential of principal component analysis (PCA) of multi-spectral imaging data in the wavelength range 450- 950 nm for distant skin melanoma recognition is discussed. Processing of the measured clinical data by means of PCA resulted in clear separation between malignant melanomas and pigmented nevi.

  10. Statistical evaluation of nutritional components impacting phycocyanin production in Synechocystis SP

    Directory of Open Access Journals (Sweden)

    Devendra V. Deshmukh

    2012-03-01

    Full Text Available Alkaliphilic cyanobacterial cultures were isolated from Lonar lake (MS, India. Among the set of cultures, Synechocystis sp, was studied for phycocyanin production. A maximum yield was obtained in BG-11 medium at optimized conditions (pH 10 and 16 h light. In order to increase the phycocyanin yield media optimization based on the eight media components a Plackett-Burman design of the 12 experimental trials was used. As per the analysis CaCl2.2H2O and Na2CO3 have been found to be the most influencing media components at 95% significance. Further the optimum concentrations of these components were estimated following a Box Wilson Central Composite Design (CCD with four star points and five replicates at the center points for each of two factors was adopted for optimization of these two media components. The results indicated that there was an interlinked influence of CaCl2.2H2O and Na2CO3 on 98% significance. The maximum yield of phycocyanin (12% of dry wt could be obtained at 0.058 g/l and 0.115 g/l of CaCl2.2H2O and Na2CO3, respectively.

  11. An Integrated Health Monitoring Method for Structural Fatigue Life Evaluation Using Limited Sensor Data

    Directory of Open Access Journals (Sweden)

    Jingjing He

    2016-11-01

    Full Text Available A general framework for structural fatigue life evaluation under fatigue cyclic loading using limited sensor data is proposed in this paper. First, limited sensor data are measured from various sensors which are preset on the complex structure. Then the strain data at remote spots are used to obtain the strain responses at critical spots by the strain/stress reconstruction method based on empirical mode decomposition (REMD method. All the computations in this paper are directly performed in the time domain. After the local stress responses at critical spots are determined, fatigue life evaluation can be performed for structural health management and risk assessment. Fatigue life evaluation using the reconstructed stresses from remote strain gauge measurement data is also demonstrated with detailed error analysis. Following this, the proposed methodology is demonstrated using a three-dimensional frame structure and a simplified airfoil structure. Finally, several conclusions and future work are drawn based on the proposed study.

  12. LIFE Materials: Topical Assessment Report for LIFE Volume 1 TOPIC: Solid First Wall and Structural Components TASK: Radiation Effects on First Wall

    Energy Technology Data Exchange (ETDEWEB)

    Caro, A

    2008-11-26

    This report consists of the following chapters: CHAPTER A: LIFE Requirements for Materials. Part 1: The structure of the First Wall--Basic requirements; A qualitative view of the challenge; The candidate materials; and Base-line material's properties. CHAPTER B: Summary of Existing Knowledge--Brief historical introduction; Design window; The temperature window; Evolution of the design window with damage; Damage calculations; He and H production; Swelling resistance; Incubation dose for swelling; Design criterion No. 1, Strength; Design criterion No. 2, Corrosion resistance; Design criterion No. 3, Creep resistance; Design criterion No. 4, Radiation induced embrittlement; and Conclusions. CHAPTER C: Identification of Gaps in Knowledge & Vulnerabilities. CHAPTER D: Strategy and Future Work.

  13. Evaluation of Adolescents Diagnosed with Acne Vulgaris for Quality of Life and Psychosocial Challenges

    Science.gov (United States)

    Eyüboglu, Murat; Kalay, Incilay; Eyüboglu, Damla

    2018-01-01

    Background: Acne vulgaris is a common skin condition which affects most adolescents. It has a major impact on quality of life and psychosocial well-being. Aims: The aims of the study were to examine the psychosocial effects of acne on adolescents and changes in quality of life, and to reveal any difference in the possible effect between genders. In addition, an investigation of the association between acne severity and quality of life as well as psychosocial stress was conducted. Materials and Methods: The present study included 164 adolescents with a mean age of 12–18 years and was diagnosed with acne vulgaris without any previous treatment. The control group consisted of 188 healthy volunteers. Acne severity was evaluated by the global acne grading system. All patients filled in a Children's Dermatology Life Quality Index, Pediatric Quality of Life Questionnaire (PedsQL), and a Strength and Difficulties Questionnaire (SDQ). Results: The scores of SDQ and PedsQL were significantly lower in the case group. There was no significant correlation found between the genders in the control group for acne severity and scale scores. No significant correlation was found between acne severity and psychosocial challenges. Conclusions: The results of the present study show that acne has a significant effect on quality of life for adolescents, and this has an impact on their psychosocial life. Another important finding of the present study is that worsening in quality of life is not affected by some factors such as duration, severity of acne and age. PMID:29692454

  14. The SPAtial EFficiency metric (SPAEF): multiple-component evaluation of spatial patterns for optimization of hydrological models

    Science.gov (United States)

    Koch, Julian; Cüneyd Demirel, Mehmet; Stisen, Simon

    2018-05-01

    The process of model evaluation is not only an integral part of model development and calibration but also of paramount importance when communicating modelling results to the scientific community and stakeholders. The modelling community has a large and well-tested toolbox of metrics to evaluate temporal model performance. In contrast, spatial performance evaluation does not correspond to the grand availability of spatial observations readily available and to the sophisticate model codes simulating the spatial variability of complex hydrological processes. This study makes a contribution towards advancing spatial-pattern-oriented model calibration by rigorously testing a multiple-component performance metric. The promoted SPAtial EFficiency (SPAEF) metric reflects three equally weighted components: correlation, coefficient of variation and histogram overlap. This multiple-component approach is found to be advantageous in order to achieve the complex task of comparing spatial patterns. SPAEF, its three components individually and two alternative spatial performance metrics, i.e. connectivity analysis and fractions skill score, are applied in a spatial-pattern-oriented model calibration of a catchment model in Denmark. Results suggest the importance of multiple-component metrics because stand-alone metrics tend to fail to provide holistic pattern information. The three SPAEF components are found to be independent, which allows them to complement each other in a meaningful way. In order to optimally exploit spatial observations made available by remote sensing platforms, this study suggests applying bias insensitive metrics which further allow for a comparison of variables which are related but may differ in unit. This study applies SPAEF in the hydrological context using the mesoscale Hydrologic Model (mHM; version 5.8), but we see great potential across disciplines related to spatially distributed earth system modelling.

  15. Physical activity, evaluation of menopause, life satisfaction and influence tactics in marriage of perimenopausal women

    Directory of Open Access Journals (Sweden)

    Eugenia Mandal

    2016-10-01

    Full Text Available Background Domination of the biomedical approach to menopause may imply creation of negative attitudes to the phenomenon, and at the same time negatively affect women’s life satisfaction and behaviour in the family. It is assumed that physical activity may be a defensive factor, as this type of activity may reduce the intensity of menopause symptoms. The aim of the research was to determine the relation between menopause evaluation, life satisfaction and tactics of influence employed in marriage by women who differ in involvement in physical exercise. Participants and procedure The research was conducted among 90 women, at the age of 45-55: 45 physically active women and 45 women who do not engage in any physical activity. The following research methods were used: the Menopause Evaluation Scale, the Satisfaction With Life Scale (SWLS and the Questionnaire of Influence in Close Relations of Women and Men. Results Positive evaluation of menopause was related to involvement in physical exercise as well as to a stronger tendency to use positive strategies of exerting influence on one’s spouse. The research also showed a slight correlation between life satisfaction and involvement in physical exercise. Negative evaluation of menopause was related to avoiding physical activity. Conclusions Physical activity is more frequently related to a positive attitude towards menopause and the use of more positive tactics of exerting influence on one’s spouse, and slightly positively conducive to one’s life satisfaction level.

  16. Fatigue life evaluation method of austenitic stainless steel in PWR water

    International Nuclear Information System (INIS)

    Sakaguchi, Katsumi; Nomura, Yuichiro; Suzuki, Shigeki; Kanasaki, Hiroshi; Higuchi, Makoto

    2006-09-01

    It is known that the fatigue life in elevated temperature water is substantially reduced compared with that in the air. The fatigue life reduction has been investigated experimentally in EFT project of Japan Nuclear Energy Safety Organization (JNES) to evaluate the environmental effect on fatigue life. Many tests have been done for carbon, low alloy, stainless steels and nickel-based alloy under the various conditions. In this paper, the results of the stainless steel in simulated PWR water environments were reported. Fatigue life tests in simulated PWR environments were carried out and the effect of key parameters on fatigue life reduction was examined. The materials used in this study were base and weld metal of austenitic stainless steel SS316, weld metal of SS304 and the base and aged metal of the duplex stainless steel SCS14A. In order to evaluate the effects of stain amplitude, strain rate, strain ratio, temperature, aging, water flow rate and strain holding time, many fatigue tests were examined. In transient condition in an actual plant, however, such parameters as temperature and strain rate are not constant. In order to evaluate fatigue damage in actual plant on the basis of experimental results under constant temperature and strain rate condition, the modified rate approach method was developed. Various kinds of transient have to be taken into account of in actual plant fatigue evaluation, and stress cycle of several ranges of amplitude has to be considered in assessing damage from fatigue. Generally, cumulative usage factor is applied in this type of evaluation. In this study, in order to confirm the applicability of modified rate approach method together with cumulative usage factor, fatigue tests were carried out by combining stress cycle blocks of different strain amplitude levels, in which strain rate changes in response to temperature in a simulated PWR water environment. Consequently, fatigue life could be evaluated with an accuracy of factor of 3

  17. Design of a cryogenic test facility for evaluating the performance of interferometric components of the SPICA/SAFARI instrument

    Science.gov (United States)

    Veenendaal, Ian T.; Naylor, David A.; Gom, Brad G.

    2014-08-01

    The Japanese SPace Infrared telescope for Cosmology and Astrophysics (SPICA), a 3 m class telescope cooled to ~ 6 K, will provide extremely low thermal background far-infrared observations. An imaging Fourier transform spectrometer (SAFARI) is being developed to exploit the low background provided by SPICA. Evaluating the performance of the interferometer translation stage and key optical components requires a cryogenic test facility. In this paper we discuss the design challenges of a pulse tube cooled cryogenic test facility that is under development for this purpose. We present the design of the cryostat and preliminary results from component characterization and external optical metrology.

  18. Evaluation test of high temperature strain gages used in a stethoscope for OGL-1 components in an elevated temperature service

    International Nuclear Information System (INIS)

    Sato, Toshimi; Tanaka, Isao; Komori, Yoshihiro; Suzuki; Toshiaki.

    1982-01-01

    The stethoscope for OGL-1 components in a elevated temperature service (SOCETS) is a measuring system of evaluation integrity of structures for high temperature pipings during operations of Japan Material Testing Reactor. This paper is described about the results on fundamental performance on high temperature strain gages. From their test results that have been based on correlation of temperature-timestrain factors, it became clear that two weldable strain gages and a capacitance strain gage were available for strain measurements of OGL-1 components. (author)

  19. Evaluation test of high temperature strain gages used in a stethoscope for OGL-1 components in an elevated temperature service

    Energy Technology Data Exchange (ETDEWEB)

    Sato, Toshimi (Kyowa Electronic Inst. Co. Ltd. (Japan)); Tanaka, Isao; Komori, Yoshihiro; Suzuki; Toshiaki

    1982-08-01

    The stethoscope for OGL-1 components in a elevated temperature service (SOCETS) is a measuring system of evaluation integrity of structures for high temperature pipings during operations of Japan Material Testing Reactor. This paper is described about the results on fundamental performance on high temperature strain gages. From their test results that have been based on correlation of temperature-timestrain factors, it became clear that two weldable strain gages and a capacitance strain gage were available for strain measurements of OGL-1 components.

  20. Evaluation for membrane components of water recycling system. Mizu saisei junkan system yoso no tokusei hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Tanemura, T; Otsubo, K; Oguchi, M [National Aerospace Laboratory, Tokyo (Japan); Ashida, A; Hamano, N; Mitani, K [Hitachi, Ltd., Tokyo (Japan)

    1992-04-01

    The configuration of water recycling systems with membrane filters was studied to purify waste water discharged from human beings, animals and plants which is a key subsystem for closed ecological life support systems (CELSS) essential to long-term manned space activity. The filter performance test apparatus with three kinds of filters such as pre-filter, reverse osmosis membrane filter and ultra membrane filter was fabricated to conduct long-term cycling high-concentration tests using artificial urine as original waste water. As a result, since every membrane filter offered their nominal performance incompletely in high-concentration tests, it was necessary to add an NaCl removing apparatus to the system as primary treated water should be used for vegetation. It was also required to test the membrane performance preliminarily because the performance such as membrane life was different between various waste waters. 7 refs., 32 figs., 9 tabs.

  1. Specialized data analysis for the Space Shuttle Main Engine and diagnostic evaluation of advanced propulsion system components

    Science.gov (United States)

    1993-01-01

    The Marshall Space Flight Center is responsible for the development and management of advanced launch vehicle propulsion systems, including the Space Shuttle Main Engine (SSME), which is presently operational, and the Space Transportation Main Engine (STME) under development. The SSME's provide high performance within stringent constraints on size, weight, and reliability. Based on operational experience, continuous design improvement is in progress to enhance system durability and reliability. Specialized data analysis and interpretation is required in support of SSME and advanced propulsion system diagnostic evaluations. Comprehensive evaluation of the dynamic measurements obtained from test and flight operations is necessary to provide timely assessment of the vibrational characteristics indicating the operational status of turbomachinery and other critical engine components. Efficient performance of this effort is critical due to the significant impact of dynamic evaluation results on ground test and launch schedules, and requires direct familiarity with SSME and derivative systems, test data acquisition, and diagnostic software. Detailed analysis and evaluation of dynamic measurements obtained during SSME and advanced system ground test and flight operations was performed including analytical/statistical assessment of component dynamic behavior, and the development and implementation of analytical/statistical models to efficiently define nominal component dynamic characteristics, detect anomalous behavior, and assess machinery operational condition. In addition, the SSME and J-2 data will be applied to develop vibroacoustic environments for advanced propulsion system components, as required. This study will provide timely assessment of engine component operational status, identify probable causes of malfunction, and indicate feasible engineering solutions. This contract will be performed through accomplishment of negotiated task orders.

  2. Reliable tool life measurements in turning - an application to cutting fluid efficiency evaluation

    DEFF Research Database (Denmark)

    Axinte, Dragos A.; Belluco, Walter; De Chiffre, Leonardo

    2001-01-01

    The paper proposes a method to obtain reliable measurements of tool life in turning, discussing some aspects related to experimental procedure and measurement accuracy. The method (i) allows and experimental determination of the extended Taylor's equation, with a limited set of experiments and (ii......) provides efficiency evaluation. Six cutting oils, five of which formulated from vegetable basestock, were evaluated in turning. Experiments were run in a range of cutting parameters. according to a 2, 3-1 factorial design, machining AISI 316L stainless steel with coated carbide tools. Tool life...

  3. Evaluation of the oxidation behavior and strength of the graphite components in the VHTR, (1)

    International Nuclear Information System (INIS)

    Eto, Motokuni; Kurosawa, Takeshi; Nomura, Shinzo; Imai, Hisashi

    1987-04-01

    Oxidation experiments have been carried out mainly on a fine-grained isotropic graphite, IG-110, at temperatures between 1173 and 1473 K in a water vapor/helium mixture. In most cases water vapor concentration was 0.65 vol% and helium pressure, 1 atm. Reaction rate and burn-off profile were measured using cylindrical specimens. On the basis of the experimental data the oxidation behavior of fuel block and core support post under the condition of the VHTR operation was estimated using the first-order or Langmuir-Hinshelwood equation with regard to water vapor concentration. Strength and stress-strain relationship of the graphite components with burn-off profiles estimated above were analyzed on the basis of the model for stress-strain relationship and strength of graphite specimens with density gradients. The estimation indicated that the integrity of the components would be maintained during normal reactor operation. (author)

  4. Matrix effects in PIXE evaluation of the major components in thick homogeneous samples

    International Nuclear Information System (INIS)

    Oystaeyen, B. van; Demortier, G.

    1983-01-01

    Matrix effects on the major component X-ray yields in PIXE measurements are studied in general terms with the Au-Cu-Ag matrix as practical example. Postulating firstly that all the major components may be simultaneously detected through one well-isolated peak for each of them, and secondly that a known reference material is available which contains all the elements of the unknown sample, we propose a direct method to extract the true concentrations of the latter taking into accout the matrix effects. The geometrical parameters describing the target location with respect to ion beam direction and detector position are also studied and a first attempt is made to include them in the data treatment. (orig.)

  5. Algorithms and programs for evaluating fault trees with multi-state components

    International Nuclear Information System (INIS)

    Wickenhaeuser, A.

    1989-07-01

    Part 1 and 2 of the report contain a summary overview of methods and algorithms for the solution of fault tree analysis problems. The following points are treated in detail: Treatment of fault tree components with more than two states. Acceleration of the solution algorithms. Decomposition and modularization of extensive systems. Calculation of the structural function and the exact occurrence probability. Treatment of statistical dependencies. A flexible tool to be employed in solving these problems is the method of forming Boolean variables with restrictions. In this way, components with more than two states can be treated, the possibilities of forming modules expanded, and statistical dependencies treated. Part 3 contains descriptions of the MUSTAFA, MUSTAMO, PASPI, and SIMUST computer programs based on these methods. (orig./HP) [de

  6. Evaluation of functional scintigraphy of gastric emptying by the principal component method

    Energy Technology Data Exchange (ETDEWEB)

    Haeussler, M.; Eilles, C.; Reiners, C.; Moll, E.; Boerner, W.

    1980-10-01

    Gastric emptying of a standard semifluid test-meal, labeled with /sup 99/sup(m)Tc-DTPA, was studied by functional scintigraphy in 88 subjects (normals, patients with duodenal and gastric ulcer before and after selective proximal vagotomy with and without pyloroplasty). Gastric emptying curves were analysed by the method of principal components. Patients after selective proximal vagotomy with pyloroplasty showed an rapid initial emptying, whereas this was a rare finding in patients after selective proximal vagotomy without pyloroplasty. The method of principal components is well suited for mathematical analysis of gastric emptying; nevertheless the results are difficult to interpret. The method has advantages when looking at larger collectives and allows a separation into groups with different gastric emptying.

  7. EVALUATION OF CHEMICAL AND ELECTROLYTE COMPONENTS OF MILK IN SUBCLINICAL MASTITIS IN HOLSTEIN X HARYANA CATTLE

    Directory of Open Access Journals (Sweden)

    Anirban Guha

    2012-01-01

    Full Text Available The present investigation was carried out to investigate whether the chemical and electrolyte components of milk can be used as an indicator to detect subclinical mastitis in Holstein X Haryana cows. The bacterial cultural examination revealed 32 cows comprising 34 quarters are SCM positive. SCM positive and negative samples were estimated for electrical conductivity (EC and pH with respective meters, sodium (Na+ and potassium (K+ with Flame photometer and chloride (Cl- by titremetric method. The result demonstrated statistically significant (p<0.01 increase in EC, Na+ and Cl- and decrease in K+. After studying the correlation coefficient among the milk components and comparing them with a Gold standard (Log10 SCC separately in normal and infected milk it was found that Na+, Cl- and K+ are the indicators of SCM in the present study.

  8. Evaluation of High Pressure Components of Fuel Injection Systems Using Speckle Interferometry

    OpenAIRE

    Basara, Adis

    2007-01-01

    The modern high pressure fuel injection systems installed in engines provide a highly efficient combustion process accompanied by low emissions of exhaust gases and an impressive level of dynamic response. The design and development of mechanical components for such systems pose a great challenge, since they have to operate under extremely high fluctuating pressures (e.g. up to 2000 bar) for a long lifetime (more than 1000 injections per minute). The permanent change between a higher and a lo...

  9. Evaluation of nuclear power plant component failure probability and core damage probability using simplified PSA model

    International Nuclear Information System (INIS)

    Shimada, Yoshio

    2000-01-01

    It is anticipated that the change of frequency of surveillance tests, preventive maintenance or parts replacement of safety related components may cause the change of component failure probability and result in the change of core damage probability. It is also anticipated that the change is different depending on the initiating event frequency or the component types. This study assessed the change of core damage probability using simplified PSA model capable of calculating core damage probability in a short time period, which is developed by the US NRC to process accident sequence precursors, when various component's failure probability is changed between 0 and 1, or Japanese or American initiating event frequency data are used. As a result of the analysis, (1) It was clarified that frequency of surveillance test, preventive maintenance or parts replacement of motor driven pumps (high pressure injection pumps, residual heat removal pumps, auxiliary feedwater pumps) should be carefully changed, since the core damage probability's change is large, when the base failure probability changes toward increasing direction. (2) Core damage probability change is insensitive to surveillance test frequency change, since the core damage probability change is small, when motor operated valves and turbine driven auxiliary feed water pump failure probability changes around one figure. (3) Core damage probability change is small, when Japanese failure probability data are applied to emergency diesel generator, even if failure probability changes one figure from the base value. On the other hand, when American failure probability data is applied, core damage probability increase is large, even if failure probability changes toward increasing direction. Therefore, when Japanese failure probability data is applied, core damage probability change is insensitive to surveillance tests frequency change etc. (author)

  10. Evaluating the perception of virtual characters by manipulating components of their physical appearance

    OpenAIRE

    ZIBREK, KATJA

    2017-01-01

    APPROVED This work explores the possibilities of studying the perception of 3D generated (virtual) based on the knowledge of perceptual organisation and methods used to study human behaviour. Our main intention is to present studies which explore responses towards virtual characters by manipulating specific components of their appearance. The literature on virtual characters presents some examples on how appearance could affect the perceiver's response. The most well-known phenomenon is th...

  11. Application of principal component analysis to multispectral imaging data for evaluation of pigmented skin lesions

    Science.gov (United States)

    Jakovels, Dainis; Lihacova, Ilze; Kuzmina, Ilona; Spigulis, Janis

    2013-11-01

    Non-invasive and fast primary diagnostics of pigmented skin lesions is required due to frequent incidence of skin cancer - melanoma. Diagnostic potential of principal component analysis (PCA) for distant skin melanoma recognition is discussed. Processing of the measured clinical multi-spectral images (31 melanomas and 94 nonmalignant pigmented lesions) in the wavelength range of 450-950 nm by means of PCA resulted in 87 % sensitivity and 78 % specificity for separation between malignant melanomas and pigmented nevi.

  12. Evaluating the impact of relationship marketing components on customers' loyalty level: Evidence from Iran Khodro Corporation

    Directory of Open Access Journals (Sweden)

    Mohammad Hakkak

    2013-02-01

    Full Text Available During the past few years, Iranian auto industries sell their products directly to customers and the increase competition among domestic auto makers has increased motivation to pay especial attention to their customers. This paper investigates relationship between marketing and customer’s loyalty. The study designs a questionnaire consists of three parts. The first part is associated with customer information, the second part considers relationship marketing factors and the third part measures components of customer’s loyalty. Cronbach alpha in relationship marketing, loyalty and overall alpha were measured 0.878, 0.891 and 0.712, respectively. Obtained data were analyzed using LISREL software. Ranking the components of the internal and external latent variable are discussed by using the Friedman test and our investigation indicates that some components are not meaningful when the level of significance is five percent. Based on the results of Freedman test, common sense is the most important factor with relative weight of 4.08, followed by relationship (4.01, trust (3.90, commitment(3.86, trouble shooting (2.88 and for the variable of loyalty, quality(3.89, reputation(3.57, decoration(3.4, responsibility(2.96, clients seeking variety (1.75 have the highest average respectively. Note that the results of Friedman test are consistent with the results of structural equation modeling. Chi-Square values have been calculated as 597.701 and 108.917 for marketing relationship and loyalty, respectively.

  13. CONCEPT AND MODELS FOR EVALUATION OF BLACK AND WHITE SMOKE COMPONENTS IN DIESEL ENGINE EXHAUST

    Directory of Open Access Journals (Sweden)

    Igor BLYANKINSHTEIN

    2017-09-01

    Full Text Available A method for measuring exhaust smoke opacity has been developed, which allows estimating the differentiated components forming black exhaust and those forming white smoke. The method is based on video recording and special software for processing the video recording data. The flow of the diesel exhaust gas is visualised using the digital camera, against the background of the screen, on a cut of an exhaust pipe, and with sufficient illumination of the area. The screen represents standards of whiteness and blackness. The content of the black components (soot is determined by the degree of blackening of the white standard in the frames of the video, and the content of whitish components (unburned fuel and oil, etc. is determined by the degree of whitening of black standard on the frames of the video. The paper describes the principle and the results of testing the proposed method of measuring exhaust smoke opacity. We present an algorithm for the frame-by-frame analysis of the video sequence, and static and dynamic mathematical models of exhaust opacity, measured under free-acceleration of a diesel engine.

  14. The Fear of Positive Evaluation Scale: assessing a proposed cognitive component of social anxiety.

    Science.gov (United States)

    Weeks, Justin W; Heimberg, Richard G; Rodebaugh, Thomas L

    2008-01-01

    Cognitive-behavioral models propose that fear of negative evaluation is the core feature of social anxiety disorder. However, it may be that fear of evaluation in general is important in social anxiety, including fears of positive as well as negative evaluation. To test this hypothesis, we developed the Fear of Positive Evaluation Scale (FPES) and conducted analyses to examine the psychometric properties of the FPES, as well as test hypotheses regarding the construct of fear of positive evaluation (FPE). Responses from a large (n = 1711) undergraduate sample were utilized. The reliability, construct validity, and factorial validity of the FPES were examined; the distinction of FPE from fear of negative evaluation was evaluated utilizing confirmatory factor analysis; and the ability of FPE to predict social interaction anxiety above and beyond fear of negative evaluation was assessed. Results provide preliminary support for the psychometric properties of the FPES and the validity of the construct of FPE. The implications of FPE with respect to the study and treatment of social anxiety disorder are discussed.

  15. Evaluation of Quality of Life of Those Living near a Wind Farm.

    Science.gov (United States)

    Mroczek, Bożena; Banaś, Joanna; Machowska-Szewczyk, Małgorzata; Kurpas, Donata

    2015-05-29

    Health-related quality of life (HRQoL) can serve as a multidimensional means of evaluating the relationship between the presence of wind turbines in residential areas and their consequence for health. The purpose of this study was to determine whether a relationship exists between the presence of wind farms at different stages of development and the HRQoL of people living in their vicinity in Poland. The instruments employed in this study were the SF-36v2, a questionnaire measuring self-reported health problems, and a sociodemographic questionnaire. The study involved 1277 people who lived within 2 km from a wind turbine. The highest overall QoL scores were obtained by respondents living the closest to wind turbines. The mental health, role emotional, and social functioning scores were significantly higher among respondents living near wind farms and wind-farm construction sites than among those living close to locations where wind farms were planned but where construction had not yet begun. Positive correlations were found between physical and mental component scores and reactions to the news of plans to construct a wind farm. Significant differences in physical and mental component scores were observed between residents who reacted calmly and those who responded with apprehension. Residents who expected the improvement of their financial standing as a result of the wind farm assessed their general health higher than those who did not expect to receive any economic benefits. The lowest QoL scores corresponded to frequent headaches, stomach aches, and back pain over the previous three months, as well as recurrent problems with falling asleep, anxiety, and a lack of acceptance of the project. The lowest overall QoL and general health scores were noted among residents of places where wind-farm developments were either at the stage of planning or under construction. In order to find ways of reducing environmental stress and its adverse effects on health, it is

  16. A framework for evaluating the accessibility of raw materials from end-of-life products and the Earth's crust.

    Science.gov (United States)

    Mueller, Sandra R; Wäger, Patrick A; Turner, David A; Shaw, Peter J; Williams, Ian D

    2017-10-01

    An increasing number of geochemically scarce metallic raw materials are entering into our lives via new technologies. A reversal of this trend is not foreseeable, leading to concerns regarding the security of their supply. However, the evaluation of raw material supply is currently hampered by inconsistent use of fundamental terminologies and incomplete assessment criteria. In this paper, we aim to establish a consistent framework for evaluating raw material supply from both anthropogenic and geological sources. A method for concept extraction was applied to evaluate systematically the use of fundamental terms in the evaluation of raw material supply. The results have shown that 'availability' is commonly used in raw material supply evaluations, whilst other researchers suggest that raw material supply should be evaluated based on 'accessibility'. It was revealed that 'accessibility' actually comprises two aspects: 'availability' and 'approachability'. Raw material 'approachability' has not previously been explicitly addressed at a system level. A novel, consistent framework for evaluating raw material supply was therefore developed. To demonstrate the application of the established framework, we evaluated the raw material supply of four rare earth element case studies. Three case studies are End-of-Life products (the anthroposphere) from Switzerland: (i) phosphors in fluorescent lamps, (i) permanent magnets in the drive motors of electric cars and (iii) fibre optic cable. The fourth case study source is the Earth's crust (the geosphere): Mount Weld deposit in Australia. The framework comprises a comprehensive evaluation of six components relating to raw material mining and processing: their geological knowledge, eligibility, technology, economic, societal and environmental impacts. Our results show that metals are not considered to be fully accessible in any of the case studies due to a lack of necessary technologies and potential societal and environmental

  17. An evaluation of the relations between flow regime components, stream characteristics, species traits and meta-demographic rates of warmwater stream fishes: Implications for aquatic resource management

    Science.gov (United States)

    Peterson, James T.; Shea, C.P.

    2015-01-01

    Fishery biologists are increasingly recognizing the importance of considering the dynamic nature of streams when developing streamflow policies. Such approaches require information on how flow regimes influence the physical environment and how those factors, in turn, affect species-specific demographic rates. A more cost-effective alternative could be the use of dynamic occupancy models to predict how species are likely to respond to changes in flow. To appraise the efficacy of this approach, we evaluated relative support for hypothesized effects of seasonal streamflow components, stream channel characteristics, and fish species traits on local extinction, colonization, and recruitment (meta-demographic rates) of stream fishes. We used 4 years of seasonal fish collection data from 23 streams to fit multistate, multiseason occupancy models for 42 fish species in the lower Flint River Basin, Georgia. Modelling results suggested that meta-demographic rates were influenced by streamflows, particularly short-term (10-day) flows. Flow effects on meta-demographic rates also varied with stream size, channel morphology, and fish species traits. Small-bodied species with generalized life-history characteristics were more resilient to flow variability than large-bodied species with specialized life-history characteristics. Using this approach, we simplified the modelling framework, thereby facilitating the development of dynamic, spatially explicit evaluations of the ecological consequences of water resource development activities over broad geographic areas. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

  18. Evaluation of individual quality of life among hemodialysis patients: nominated themes using SEIQoL-adapted.

    Science.gov (United States)

    Matlabi, Hossein; Ahmadzadeh, Sharareh

    2017-01-01

    Quality of life (QoL) has become an important issue for patients with chronic renal failure diseases who are permanently undergoing hemodialysis. In this study, an adapted schedule for the evaluation of individual quality of life (SEIQoL-adapted) was used to evaluate QoL among hemodialysis patients, to explore their views about the most important aspects of life satisfaction. A multiple approach design and convenience sampling were applied to recruit 53 patients from a hemodialysis unit in Iran. Data were collected through structured interviews and then analyzed using conventional content analysis. A total score for QoL was calculated using scale guideline. The most important aspects of life were health, family, financial status, living conditions, leisure activities, relationships and socializing, religious and spiritual issues, medical knowledge, and therapies or treatments. The calculated mean QoL score was 66.2, indicating a relatively high life satisfaction. Males had higher QoL scores than females in both married and single groups. Moreover, the relationships between the QoL scores and education, job and marital status were not statistically significant. The SEIQoL-adapted revealed reasonable lay definitions of QoL in a group of patients following chronic renal failure. The patients' views of the aspects of life could be used by health policy makers, clinicians, and caregivers as a reliable guide to the most important priorities for treatment and medical interventions.

  19. Evaluation of social anxiety, self-esteem, life quality in adolescents with acne vulgaris.

    Science.gov (United States)

    Unal, Dilek; Emiroğlu, Nazan; Cengiz, Fatma Pelin

    2016-08-05

    Acne vulgaris is a visible skin disease commonly seen in adolescence. As it affects the appearance, it is likely to bring stress to the adolescent's life regarding sensitivity about their appearance. The aim of the study was to investigate the social anxiety level, acne-specific life quality, and self-esteem among adolescents with acne vulgaris. In addition, we evaluated the relationship between these parameters, clinical severity, and sociodemographic data. One hundred and two adolescents with acne vulgaris, aged 12-17 years without any psychiatric or medical comorbidity were recruited. The control group consisted of 83 adolescents in the same age range, who had neither psychiatric disease nor acne. Sociodemographic form (SDF), Capa Social Phobia Scale for Children and Adolescents (CSPSCA), and Rosenberg Self-esteem Scale (RSES) were applied to both groups. Additionally, the severity of acne was determined with Global Acne Grading System (GAGS), and life quality of the patients was evaluated with Acne Quality of Life Scale (AQOL). There was no significant difference in social anxiety levels and self-esteem between the study and control groups. Life quality impairment and high social anxiety levels, as well as low self-esteem, were found to be associated regardless of the clinical severity. Clinicians should be aware of the psychiatric comorbidities when treating adolescents with acne vulgaris. Especially, low self-esteem and life quality impairment should warn clinicians to predict high social anxiety levels in adolescent acne patients.

  20. Implementation of constitutive equations for creep damage mechanics into the ABAQUS finite element code - some practical cases in high temperature component design and life assessment

    International Nuclear Information System (INIS)

    Segle, P.; Samuelson, L.Aa.; Andersson, Peder; Moberg, F.

    1996-01-01

    Constitutive equations for creep damage mechanics are implemented into the finite element program ABAQUS using a user supplied subroutine, UMAT. A modified Kachanov-Rabotnov constitutive equation which accounts for inhomogeneity in creep damage is used. With a user defined material a number of bench mark tests are analyzed for verification. In the cases where analytical solutions exist, the numerical results agree very well. In other cases, the creep damage evolution response appear to be realistic in comparison with laboratory creep tests. The appropriateness of using the creep damage mechanics concept in design and life assessment of high temperature components is demonstrated. 18 refs

  1. Evaluation of Lithium-ion Battery Second Life Performance and Degradation

    DEFF Research Database (Denmark)

    Martinez-Laserna, Egoitz; Sarasketa-Zabala, Elixabet; Stroe, Daniel Loan

    2016-01-01

    the effects of lithium-ion (Li-ion) battery State of Health (SOH) and ageing history over the second life performance on two different applications: a residential demand management application and a power smoothing renewable integration application. The performance and degradation of second life batteries......Reusing electric vehicle batteries once they have been retired from the automotive application is stated as one of the possible solutions to reduce electric vehicle costs. Many publications in the literature have analyzed the economic viability of such a solution, and some car manufacturers have...... recently started running several projects to demonstrate the technical viability of the so-called battery second life. Nevertheless, the performance and degradation of second life batteries remain an unknown topic and one of the biggest gaps in the literature. The present work aims at evaluating...

  2. Management status of end-of-life vehicles and development strategies of used automotive electronic control components recycling industry in China.

    Science.gov (United States)

    Wang, Junjun; Chen, Ming

    2012-11-01

    Recycling companies play a leading role in the system of end-of-life vehicles (ELVs) in China. Automotive manufacturers in China are rarely involved in recycling ELVs, and they seldom provide dismantling information for recycling companies. In addition, no professional shredding plant is available. The used automotive electronic control components recycling industry in China has yet to take shape because of the lack of supporting technology and profitable models. Given the rapid growth of the vehicle population and electronic control units in automotives in China, the used automotive electronic control components recycling industry requires immediate development. This paper analyses the current recycling system of ELVs in China and introduces the automotive product recycling technology roadmap as well as the recycling industry development goals. The strengths, weaknesses, opportunities and challenges of the current used automotive electronic control components recycling industry in China are analysed comprehensively based on the 'strengths, weaknesses, opportunities and threats' (SWOT) method. The results of the analysis indicate that this recycling industry responds well to all the factors and has good opportunities for development. Based on the analysis, new development strategies for the used automotive electronic control components recycling industry in accordance with the actual conditions of China are presented.

  3. Extending the life of thermal power plants components by using the triad: checking - diagnosis - restoring; Extinderea duratei de viata a componentelor termoenergetice utilizand Triada: expertiza - diagnoza - remediere

    Energy Technology Data Exchange (ETDEWEB)

    Lupescue, L.; Nicolescu, N.; Delamarian, C.

    2004-12-01

    The current state of thermal power plants components requires a clear cut definition of how to apply the concept of 'Assessing the state and lifetime' to them. The application of the concept of prolonging the life of thermal power plants components represents a practical alternative to the activity of preventive maintenance, by using 'the component oriented maintenance'. A feasibility study gives results that are a covering prediction for the level of technical risk characterizing the operation of technological equipment. There are many methods of analysing the dangers and assessing the risk, as two basic types can be established: a deductive one, in which the final event is presupposed and the events that might cause this final event are searched, and an inductive one, in which the failure of a component is presupposed, and the analysis is to identify the events that led to failure. In compliance with the worldwide trends the authors of the present paper make efforts to apply the methods specific of the probability analyses, efficiently and harmoniously supplementing the concerns and results of the activities based on deterministic methods and models. 13 refs., 1 fig.

  4. C-reactive protein as an available biomarker determining mental component of health-related quality of life among individuals with spinal cord injury.

    Science.gov (United States)

    Sabour, Hadis; Latifi, Sahar; Soltani, Zahra; Shakeri, Hania; Norouzi Javidan, Abbas; Ghodsi, Seyed-Mohammad; Hadian, Mohammad Reza; Emami Razavi, Seyed-Hassan

    2017-05-01

    C-reactive protein (CRP) has been shown to correlate with health-related quality of life (HRQL) in some chronic medical conditions. However, these associations have not yet described in spinal cord injury (SCI). In this study, we tried to identify biomarkers associated with HRQL in SCI. Cross-sectional. Tertiary rehabilitation center. Referred patients to Brain and Spinal Cord Injury Research Center between November 2010 and April 2013. Blood samples were taken to measure circulatory CRP, leptin, adiponectin, ferritin, parathyroid hormone, calcitonin, thyroid hormones, fasting plasma glucose and lipid profile. All the analyses were performed with adjustment for injury-related confounders (level of injury, injury completeness and time since injury) and demographic characteristics. HRQL was measured with Short Form health survey (SF-36). The initial inverse association between CRP and total score of SF-36 (P: 0.006, r = -0.28) was lost after adjustment for confounders. However, the negative correlation between CRP and Mental Component Summary (MCS) remained significant (P: 0.0005, r = -0.38). Leptin level was inversely correlated with Physical Component Summary (PCS) (P: 0.02, r = -0.30). Although CRP and leptin levels were not related with total scores of SF-36 questionnaire, CRP can be more useful in determining mental component of HRQL whereas leptin can be a determinant of physical component. The combined consideration of these two biomarkers may help to predict HRQL in individuals with SCI.

  5. Evaluation of content validity for the FACT-G quality of life questionaire through multidimensional escalation techniques

    International Nuclear Information System (INIS)

    Sanchez, Ricardo; Ballesteros, Monica; Ortiz, Natascha

    2010-01-01

    Objective: To evaluate the structure of FACT-G latent variables in a sample of patients attending the National Cancer Institute of Colombia Methods: The FACT-G questionnaire was applied in 473 patients with different types of cancer during 2005-2007. A factor analysis was done based on a polychoric matrix and multidimensional escalation techniques for ordinal variables determining the domain structure of the questionnaire. Results: Breast and prostate cancer were the most frequent types of tumors. In total 54.6% were men and the mean age was 61 years (SD 11.7). The four domains of the questionnaire revealed a similar score. The factor analysis showed a similar structure to the original FACT-G with the emotional function as the less consistent domain. According to the multidimensional escalation analysis, a bidimensional structure is suitable after different adjustment indexes. Only the emotional function domain exposed a heterogeneous structure; the remaining revealed clustered structures and independence among them. Central components for quality of life were functional well-being and social/family well-being. Conclusions: The FACT-G quality of life questionnaire applied in a sample of Colombian patients was consistent wit the original instrument. The multidimensional escalation techniques provide additional information to conventional analysis and are useful to validate quality of life questionnaires.

  6. Evaluating thermodynamic quantities in mixed-phase regions of a single-component material

    Energy Technology Data Exchange (ETDEWEB)

    Chisolm, Eric D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-11-22

    I explain how to evaluate a multiphase EOS at a given density and energy, which is the standard case in hydrodynamic simulations, when the EOS is provided in the form of individual EOS for each phase and tabulated phase boundaries.

  7. EVALUATION OF VIBRATION LOAD ON COMMON RAIL FUEL SYSTEM COMPONENTS FOR DIESEL ENGINE

    Directory of Open Access Journals (Sweden)

    G. M. Kuharonak

    2014-01-01

    Full Text Available The objective of the paper is to develop a program, a methodology and execute vibration load tests of Common Rail fuel system components for a diesel engine. The paper contains an analysis of parameters that characterize vibration activity of research object and determine its applicability as a part of the specific mechanical system. A tests program has been developed that includes measurements of general peak values of vibration acceleration in the fuel system components, transformation of the obtained data while taking into account the fact that peak vibration acceleration values depend on crank-shaft rotation frequency and spectrum of vibration frequency, comparison of these dependences with the threshold limit values obtained in the process of component tests with the help of vibration shaker. The investigations have been carried out in one of the most stressed elements of the Common Rail fuel system that is a RDS 4.2-pressure sensor in a fuel accumulator manufactured by Robert Bosch GmbH and mounted on the MMZ D245.7E4-engines.According to the test methodology measurements have been performed on an engine test bench at all fullload engine curves. Vibration measurements have resulted in time history of the peak vibration acceleration values in three directions from every accelerometer and crank-shaft rotation frequency.It has been proposed to increase a diameter of mounting spacers of the fuel accumulator and install a damping clamp on high pressure tubes from a high pressure fuel pump to the fuel accumulator that permits to reduce a maximum peak vibration acceleration value on the pressure sensor in the fuel accumulator by 400 m/s2 and ensure its application in the given engine.

  8. Oxidation damage evaluation by non-destructive method for graphite components in high temperature gas-cooled reactor

    International Nuclear Information System (INIS)

    Shibata, Taiju; Tada, Tatsuya; Sumita, Junya; Sawa, Kazuhiro

    2008-01-01

    To develop non-destructive evaluation methods for oxidation damage on graphite components in High Temperature Gas-cooled Reactors (HTGRs), the applicability of ultrasonic wave and micro-indentation methods were investigated. Candidate graphites, IG-110 and IG-430, for core components of Very High Temperature Reactor (VHTR) were used in this study. These graphites were oxidized uniformly by air at 500degC. The following results were obtained from this study. (1) Ultrasonic wave velocities with 1 MHz can be expressed empirically by exponential formulas to burn-off, oxidation weight loss. (2) The porous condition of the oxidized graphite could be evaluated with wave propagation analysis with a wave-pore interaction model. It is important to consider the non-uniformity of oxidized porous condition. (3) Micro-indentation method is expected to determine the local oxidation damage. It is necessary to assess the variation of the test data. (author)

  9. Evaluation of in-core measurements by means of principal components method

    International Nuclear Information System (INIS)

    Makai, M.; Temesvari, E.

    1996-01-01

    Surveillance of a nuclear reactor core comprehends determination of assemblies' three-dimensional (3D) power distribution. Derived from other assemblies' measured values, power of non-measured assembly is calculated for every assembly with the help of principal components method (PCM) which is also presented. The measured values are interpolated for different geometrical coverings of the WWER-440 core. Different procedures have been elaborated and investigated, among them the most successful methods are discussed. Each method offers self consistent means to determine numerical errors of the interpolated values. (author). 13 refs, 7 figs, 2 tabs

  10. Identification and behavioral evaluation of sex pheromone components of the Chinese pine caterpillar moth, Dendrolimus tabulaeformis.

    Directory of Open Access Journals (Sweden)

    Xiang-Bo Kong

    Full Text Available BACKGROUND: The Chinese pine caterpillar moth, Dendrolimus tabulaeformis Tsai and Liu (Lepidoptera: Lasiocampidae is the most important defoliator of coniferous trees in northern China. Outbreaks occur over enormous areas and often lead to the death of forests during 2-3 successive years of defoliation. The sex pheromone of D. tabulaeformis was investigated to define its chemistry and behavioral activity. METHODOLOGY/PRINCIPAL FINDINGS: Sex pheromone was collected from calling female D. tabulaeformis by headspace solid phase microextraction (SPME and by solvent extraction of pheromone glands. Extracts were analyzed by coupled gas chromatography/mass spectrometry (GC-MS and coupled GC-electroantennographic detection (GC-EAD, using antennae from male moths. Five components from the extracts elicited antennal responses. These compounds were identified by a combination of retention indices, electron impact mass spectral matches, and derivatization as (Z-5-dodecenyl acetate (Z5-12:OAc, (Z-5-dodecenyl alcohol (Z5-12:OH, (5Z,7E-5,7-dodecadien-1-yl acetate (Z5,E7-12:OAc, (5Z,7E-5,7-dodecadien-1-yl propionate (Z5,E7-12:OPr, and (5Z,7E-5,7-dodecadien-1-ol (Z5,E7-12:OH. Behavioral assays showed that male D. tabulaeformis strongly discriminated against incomplete and aberrant blend ratios. The correct ratio of Z5,E7-12:OAc, Z5,E7-12:OH, and Z5,E7-12:OPr was essential for optimal upwind flight and source contact. The two monoenes, Z5-12:OAc and Z5-12:OH, alone or binary mixtures, had no effect on behavioral responses when added to the optimal three-component blend. CONCLUSIONS/SIGNIFICANCE: The fact that deviations from the optimal ratio of 100:100:4.5 of Z5,E7-12:OAc, Z5,EZ7-12:OH, and Z5,E7-12:OPr resulted in marked decreases in male responses suggests that biosynthesis of the pheromone components is precisely controlled. The optimal blend of the sex pheromone components of D. tabulaeformis worked out in this study should find immediate use in monitoring

  11. Fatigue evaluation including environmental effects for primary circuit components in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Seichter, Johannes [Siempelkamp Pruef- und Gutachter-Gesellschaft mbH, Dresden (Germany); Reese, Sven H.; Klucke, Dietmar [E.ON Kernkraft GmbH, Hannover (Germany). Component Technology

    2013-06-01

    The influence of LWR coolant environment to the lifetime of materials in nuclear power plants is being discussed internationally. Environmental phenomena had been investigated in laboratory tests and published in recent years. The discussion is mainly focused both on the transition from laboratory to real plant components and on numerical calculation procedures. Since publishing of the NUREG/CR-6909 report in 2007, formulae for calculating the Fen factors have been modified several times. Various calculation procedures are discussed and recommendations are made how to avoid extremely conservative results. (orig.)

  12. Evaluation of solution stability for two-component polydisperse systems by small-angle scattering

    Science.gov (United States)

    Kryukova, A. E.; Konarev, P. V.; Volkov, V. V.

    2017-12-01

    The article is devoted to the modelling of small-angle scattering data using the program MIXTURE designed for the study of polydisperse multicomponent mixtures. In this work we present the results of solution stability studies for theoretical small-angle scattering data sets from two-component models. It was demonstrated that the addition of the noise to the data influences the stability range of the restored structural parameters. The recommendations for the optimal minimization schemes that permit to restore the volume size distributions for polydisperse systems are suggested.

  13. Preliminary Evaluation of Yield and Yield Components of Some Khorasanian Sesame Ecotypes (Sesamum indicum L.

    Directory of Open Access Journals (Sweden)

    A. Nezami

    2014-09-01

    Full Text Available In most region of Khorasan, sesame ecotypes have been planted for many years, but there is little information about seed yield and yield components of them. Therefore a field experimental was conducted to investigation of yield parameters of 14 sesame ecotypes (MSC1, MSC2, MSC3, MSC4, MSC5, MSC6, MSC7, MSC8, MSC9, MSC10, MSC11, MSC12, MSC13 and MSC14 in randomized complete block design with three replications at experimental station, Collage of Agriculture, Ferdowsi University of Mashhad during 2009. Results showed that there were significant difference (P

  14. Adolescents own perceptions of self-evaluation: Self esteem, self efficacy and life satisfaction

    OpenAIRE

    Águeda Parra; Mª del Carmen Reina; Alfredo Oliva

    2010-01-01

    In this study we analyse the relationships between three variablesof self-evaluations, being self esteem, self efficacy and life satisfaction. Moreover, we study the evolution of these three aspects during adolescence paying attention to gender differences. The sample was made up of 2400 teenagers aged between 12 and 17 years old taken from 20 high schools in Western Andalusia. In this study we also analyse the relationship between teenager self evaluation and parenting style. Our results sho...

  15. Evaluation of powder metallurgical processing routes for multi-component niobium silicide-based high-temperature alloys

    Energy Technology Data Exchange (ETDEWEB)

    Seemueller, Hans Christoph Maximilian

    2016-03-22

    Niobium silicide-based composites are potential candidates to replace nickel-base superalloys for turbine applications. The goal of this work was to evaluate the feasibility and differences in ensuing properties of various powder metallurgical processing techniques that are capable of manufacturing net-shape turbine components. Two routes for powder production, mechanical alloying and gas atomization were combined with compaction via hot isostatic pressing and powder injection molding.

  16. Evaluation of the quality of blood components obtained after automated separation of whole blood by a new multiunit processor

    DEFF Research Database (Denmark)

    Lagerberg, Johan W; Salado-Jimena, Jose A; Löf, Helena

    2013-01-01

    The Reveos system (Terumo BCT) is a fully automated device able to process four whole blood (WB) units simultaneously into a plasma unit, a red blood cell (RBC) unit, and an interim platelet (PLT) unit (IPU). Multiple IPUs can be pooled to form a transfusable PLT product. The aim of our study...... was to evaluate the quality of components made with the Reveos system from either fresh (2-8 hr) or overnight-held WB....

  17. A novel dataset for real-life evaluation of facial expression recognition methodologies

    NARCIS (Netherlands)

    Siddiqi, Muhammad Hameed; Ali, Maqbool; Idris, Muhammad; Banos Legran, Oresti; Lee, Sungyoung; Choo, Hyunseung

    2016-01-01

    One limitation seen among most of the previous methods is that they were evaluated under settings that are far from real-life scenarios. The reason is that the existing facial expression recognition (FER) datasets are mostly pose-based and assume a predefined setup. The expressions in these datasets

  18. Psychometric Evaluation of the Serbian Version of the Multidimensional Students' Life Satisfaction Scale

    Science.gov (United States)

    Jovanovic, Veljko; Zuljevic, Dragan

    2013-01-01

    The main purpose of this study was to evaluate psychometric properties of the Serbian version of the Multidimensional Students' Life Satisfaction Scale (MSLSS). The research was carried out on a sample of 408 high school students (250 females, 158 males), with the mean age 16.6. The Serbian version of the MSLSS has demonstrated good psychometric…

  19. Evaluation of a Life Skills Program for Women Inmates in Michigan.

    Science.gov (United States)

    Schram, Pamela J.; Morash, Merry

    2002-01-01

    Describes and evaluates a life skills program that focuses on addressing the special needs of female inmates. Analyses of pre- and post-test scores of program participants compared emotional empathy, self-esteem, coping resources, problem solving, parenting stress, employability, and well-being. Results suggest tat the program does address some of…

  20. Evaluating European imports of Asian aquaculture products using statistically supported life cycle assessments

    NARCIS (Netherlands)

    Henriksson, Patrik John Gustav

    2015-01-01

    This thesis aims to evaluate the environmental sustainability of European imports of farmed aquatic food products from Asia, using life cycle assessment (LCA). Farming of Asian tiger prawn, whiteleg shrimp, freshwater prawn, tilapia and pangasius catfish in Bangladesh, China, Thailand and Vietnam