WorldWideScience

Sample records for components base program

  1. Component fragility research program

    International Nuclear Information System (INIS)

    Tsai, N.C.; Mochizuki, G.L.; Holman, G.S.

    1989-11-01

    To demonstrate how ''high-level'' qualification test data can be used to estimate the ultimate seismic capacity of nuclear power plant equipment, we assessed in detail various electrical components tested by the Pacific Gas ampersand Electric Company for its Diablo Canyon plant. As part of our Phase I Component Fragility Research Program, we evaluated seismic fragility for five Diablo Canyon components: medium-voltage (4kV) switchgear; safeguard relay board; emergency light battery pack; potential transformer; and station battery and racks. This report discusses our Phase II fragility evaluation of a single Westinghouse Type W motor control center column, a fan cooler motor controller, and three local starters at the Diablo Canyon nuclear power plant. These components were seismically qualified by means of biaxial random motion tests on a shaker table, and the test response spectra formed the basis for the estimate of the seismic capacity of the components. The seismic capacity of each component is referenced to the zero period acceleration (ZPA) and, in our Phase II study only, to the average spectral acceleration (ASA) of the motion at its base. For the motor control center, the seismic capacity was compared to the capacity of a Westinghouse Five-Star MCC subjected to actual fragility tests by LLNL during the Phase I Component Fragility Research Program, and to generic capacities developed by the Brookhaven National Laboratory for motor control center. Except for the medium-voltage switchgear, all of the components considered in both our Phase I and Phase II evaluations were qualified in their standard commercial configurations or with only relatively minor modifications such as top bracing of cabinets. 8 refs., 67 figs., 7 tabs

  2. Component-oriented programming

    NARCIS (Netherlands)

    Bosch, J; Szyperski, C; Weck, W; Buschmann, F; Buchmann, AP; Cilia, MA

    2003-01-01

    This report covers the eighth Workshop on Component-Oriented Programming (WCOP). WCOP has been affiliated with ECOOP since its inception in 1996. The report summarizes the contributions made by authors of accepted position papers as well as those made by all attendees of the workshop sessions.

  3. Programs, interfaces and components

    NARCIS (Netherlands)

    Bergstra, J.A.; Loots, M.E.

    The jump instruction is considered essential for an adequate theoretical understanding of imperative sequential programming. Using atomic actions and tests as a basis we outline an algebra of programs, denoted PGA, which captures the crux of sequential programming. PGA provides an ontology for

  4. Development of a noise reduction program of a prompt gamma spectrum based on principal component analysis for an explosive detection

    International Nuclear Information System (INIS)

    Lee, Yun Hee; Im, Hee Jung; Song, Byung ChoI; Park, Yong Joon; Kim, Won Ho; Cho, Jung Hwan

    2005-01-01

    This work demonstrates a developed program to reduce noises of a prompt gamma-ray spectrum measured by irradiating neutrons into baggage. The noises refer to random variations mainly caused by electrical fluctuations and also by a measurement time. Especially, since the short measurement time yields such a noisy spectrum in which its special peak can not be observed, it is necessary to extract its characteristic signals from the spectrum to identify an explosive hidden in luggage. Principal component analysis(PCA) that is a multivariate statistical technique is closely related to singular value decomposition(SVD). The SVD-based PCA decreases the noise by reconstructing the spectrum after determining the number of principal components corresponding important signals based on the history data that sufficiently describe its population. In this study, we present a visualized program of the above procedure using the MATLAB 7.04 programming language. When our program is started, it requires an arbitrary measured spectrum to be reduced and history spectra as input files. If user selects the files with menu, our program automatically carries out the PCA procedure and provides its noise-reduced spectrum plot as well as the original spectrum plot into an output window. In addition, user can obtain signal-to-noise ratio of an interesting peak by defining the peak and noise ranges with menu

  5. Component Fragility Research Program: Phase 1 component prioritization

    International Nuclear Information System (INIS)

    Holman, G.S.; Chou, C.K.

    1987-06-01

    Current probabilistic risk assessment (PRA) methods for nuclear power plants utilize seismic ''fragilities'' - probabilities of failure conditioned on the severity of seismic input motion - that are based largely on limited test data and on engineering judgment. Under the NRC Component Fragility Research Program (CFRP), the Lawrence Livermore National Laboratory (LLNL) has developed and demonstrated procedures for using test data to derive probabilistic fragility descriptions for mechanical and electrical components. As part of its CFRP activities, LLNL systematically identified and categorized components influencing plant safety in order to identify ''candidate'' components for future NRC testing. Plant systems relevant to safety were first identified; within each system components were then ranked according to their importance to overall system function and their anticipated seismic capacity. Highest priority for future testing was assigned to those ''very important'' components having ''low'' seismic capacity. This report describes the LLNL prioritization effort, which also included application of ''high-level'' qualification data as an alternate means of developing probabilistic fragility descriptions for PRA applications

  6. Public commitment, resistance to advertising, and leisure promotion in a school-based drug abuse prevention program: a component dismantling study.

    Science.gov (United States)

    Hernández-Serrano, Olga; Griffin, Kenneth W; García-Fernández, José Manuel; Orgilés, Mireia; Espada, José P

    2013-01-01

    The objective of the present study was to examine the contribution of three intervention components (public commitment, resistance to advertising, and leisure promotion) on alcohol and protective variables in a school-based substance use prevention program. Participants included 480 Spanish students aged from 14 to 16 who received the Saluda prevention program in one of the following five experimental conditions: complete program, program minus public commitment, program minus resistance to advertising, program minus leisure promotion, and a waiting-list control. The students completed self-report surveys at pretest, posttest, and 6-month follow-up assessments. When excluding the healthy leisure promotion component, the Saluda program showed no loss of efficacy neither on alcohol use nor on other substance-related variables, while public commitment and resistance to advertising improved the aforementioned program's efficacy.

  7. CoC Awards by Program Component

    Data.gov (United States)

    Department of Housing and Urban Development — CoC Awards by Program Component reports provide snapshots of award data broken down by eligible program component types for the year selected. The reports, which can...

  8. Public Commitment, Resistance to Advertising, and Leisure Promotion in a School-Based Drug Abuse Prevention Program: A Component Dismantling Study

    Science.gov (United States)

    Hernández-Serrano, Olga; Griffin, Kenneth W.; García-Fernández, José Manuel; Espada, Mireia; Orgilés José P.

    2013-01-01

    The objective of the present study was to examine the contribution of three intervention components (public commitment, resistance to advertising, and leisure promotion) on alcohol and protective variables in a school-based substance use prevention program. Participants included 480 Spanish students aged from 14 to 16 who received the…

  9. Trial application of the candidate root cause categorization scheme and preliminary assessment of selected data bases for the root causes of component failures program

    International Nuclear Information System (INIS)

    Bruske, S.Z.; Cadwallader, L.C.; Stepina, P.L.

    1985-04-01

    The objective of the Nuclear Regulatory Commission's (NRC) Root Causes of Component Failures Program is to develop and apply a categorization scheme for identifying root causes of failures for components that comprise safety and safety support systems of nuclear power plants. Results from this program will provide valuable input in the areas of probabilistic risk assessment, reliability assurance, and application of risk assessments in the inspection program. This report presents the trial application and assessment of the candidate root cause categorization scheme to three failure data bases: the In-Plant Reliability Data System (IPRDS), the Licensee Event Report (LER) data base, and the Nuclear Plant Reliability Data System (NPRDS). Results of the trial application/assessment show that significant root cause information can be obtained from these failure data bases

  10. Component analysis of a school-based substance use prevention program in Spain: contributions of problem solving and social skills training content.

    Science.gov (United States)

    Espada, José P; Griffin, Kenneth W; Pereira, Juan R; Orgilés, Mireia; García-Fernández, José M

    2012-02-01

    The objective of the present research was to examine the contribution of two intervention components, social skills training and problem solving training, to alcohol- and drug-related outcomes in a school-based substance use prevention program. Participants included 341 Spanish students from age 12 to 15 who received the prevention program Saluda in one of four experimental conditions: full program, social skills condition, problem solving condition, and a wait-list control group. Students completed self-report surveys at the pretest, posttest and 12-month follow-up assessments. Compared to the wait-list control group, the three intervention conditions produced reductions in alcohol use and intentions to use other substances. The intervention effect size for alcohol use was greatest in magnitude for the full program with all components. Problem-solving skills measured at the follow-up were strongest in the condition that received the full program with all components. We discuss the implications of these findings, including the advantages and disadvantages of implementing tailored interventions to students by selecting intervention components after a skills-based needs assessment.

  11. Use of a Web-based Delphi for identifying critical components of a professional science master's program in biotechnology

    Science.gov (United States)

    Kantz, Jeannine Wells

    The primary purpose of this research was to develop a model for a professional science master's program combining biotechnology and business. The objectives were to identify stakeholder preferences for various dimensions of a professional science master's program combining biotechnology and business and to identify differences in priorities between subgroups. A secondary purpose was to examine user preferences between Web-based and traditional methods of conducting a Delphi study and the panelist's impressions of its usefulness for program development. Prior to the first round, demographic data were collected on panelists regarding their gender, age, years experience in their current field, position title and education levels. Round 1 started with eight open-ended questions designed to investigate (a) learning objectives, (b) internships, (c) thesis vs. non-thesis degrees, (d) program focus (e) possible entry level positions, (f) roles for the industry advisory board, (g) recommended hours of hands-on experience and (h) other issues of importance. The final round ended with three questions to assess the panelists' perception of the usefulness of the Delphi for program development in higher education. Twenty-four panelists started Round 1 and participation in subsequent rounds varied from 17 in Round 2 to 11 in Round 4. Education level varied and included all levels of education in science and business. Issues emerged early in the study regarding development of different program tracks and the program goals, which were clarified in subsequent rounds. Significant differences occurred between industry and academic subgroups for two tracks, six skills designated for tracks, method of evaluating the internship, and entry-level positions appropriate for new graduates. When analyzed by level of confidence (high confidence vs. low confidence), significant differences occurred for (a) the number of semesters of hands-on experience students should have upon graduation, (b

  12. Generic component failure data base

    International Nuclear Information System (INIS)

    Eide, S.A.; Calley, M.B.

    1992-01-01

    This report discusses comprehensive component generic failure data base which has been developed for light water reactor probabilistic risk assessments. The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) was used to generate component failure rates. Using this approach, most of the failure rates are based on actual plant data rather then existing estimates

  13. Ahead of the game protocol: a multi-component, community sport-based program targeting prevention, promotion and early intervention for mental health among adolescent males.

    Science.gov (United States)

    Vella, Stewart A; Swann, Christian; Batterham, Marijka; Boydell, Katherine M; Eckermann, Simon; Fogarty, Andrea; Hurley, Diarmuid; Liddle, Sarah K; Lonsdale, Chris; Miller, Andrew; Noetel, Michael; Okely, Anthony D; Sanders, Taren; Telenta, Joanne; Deane, Frank P

    2018-03-21

    There is a recognised need for targeted community-wide mental health strategies and interventions aimed specifically at prevention and early intervention in promoting mental health. Young males are a high need group who hold particularly negative attitudes towards mental health services, and these views are detrimental for early intervention and help-seeking. Organised sports provide a promising context to deliver community-wide mental health strategies and interventions to adolescent males. The aim of the Ahead of the Game program is to test the effectiveness of a multi-component, community-sport based program targeting prevention, promotion and early intervention for mental health among adolescent males. The Ahead of the Game program will be implemented within a sample drawn from community sporting clubs and evaluated using a sample drawn from a matched control community. Four programs are proposed, including two targeting adolescents, one for parents, and one for sports coaches. One adolescent program aims to increase mental health literacy, intentions to seek and/or provide help for mental health, and to decrease stigmatising attitudes. The second adolescent program aims to increase resilience. The goal of the parent program is to increase parental mental health literacy and confidence to provide help. The coach program is intended to increase coaches' supportive behaviours (e.g., autonomy supportive behaviours), and in turn facilitate high-quality motivation and wellbeing among adolescents. Programs will be complemented by a messaging campaign aimed at adolescents to enhance mental health literacy. The effects of the program on adolescent males' psychological distress and wellbeing will also be explored. Organised sports represent a potentially engaging avenue to promote mental health and prevent the onset of mental health problems among adolescent males. The community-based design, with samples drawn from an intervention and a matched control community

  14. Component-Oriented Programming (WCOP 2004)

    NARCIS (Netherlands)

    Bosch, J.; Szyperski, C.; Weck, W.; Malenfant, J; Ostvold, BM

    2004-01-01

    This report covers the ninth Workshop on Component-Oriented Programming (WCOP). WCOP has been affiliated with ECOOP since its inception in 1996. The report summarizes the contributions made by authors of accepted position papers as well as those made by all attendees of the workshop sessions.

  15. Components of cultural competence in three mental health programs.

    Science.gov (United States)

    Siegel, Carole; Haugland, Gary; Reid-Rose, Lenora; Hopper, Kim

    2011-06-01

    The aim of this study was to identify components of cultural competence in mental health programs developed for cultural groups by community and mental health professionals from these groups. Three programs were studied: a prevention program primarily serving African-American and Afro-Caribbean youth, a Latino adult acute inpatient unit, and a Chinese day treatment program in a community-based agency. Nine study-trained field researchers used a semistructured instrument that captures program genealogy, structure, processes, and cultural infusion. Program cultural elements were identified from field notes and from individual and group interviews of consumers and staff (N=104). A research-group consensus process with feedback from program staff was used to group elements by shared characteristics into the program components of cultural competence. Components included communication competencies (with use of colloquialisms and accepted forms of address); staff in culturally acceptable roles; culturally framed trust building (such as pairing youths with mentors), stigma reduction, friendly milieus (such as serving culturally familiar foods and playing music popular with the culture), and services; and peer, family, and community involvement (including use of peer counselors and mentors, hosting parent weekends, and linking clients with senior center and community services). Incorporating these components into any program in which underserved cultural populations are seen is recommended for improving cultural competence.

  16. Component-based development process and component lifecycle

    NARCIS (Netherlands)

    Crnkovic, I.; Chaudron, M.R.V.; Larsson, S.

    2006-01-01

    The process of component- and component-based system development differs in many significant ways from the "classical" development process of software systems. The main difference is in the separation of the development process of components from the development process of systems. This fact has a

  17. Human reliability program: Components and effects

    International Nuclear Information System (INIS)

    Baley-Downes, S.

    1986-01-01

    The term ''Human Reliability Program'' (HRP) is defined as a series of selective controls which are implemented and integrated to identify the ''insider threat'' from current and prospective employees who are dishonest, disloyal and unreliable. The HRP, although not a prediction of human behaviour, is an excellent tool for decision making and should compliment security and improve employee quality. The HRP consists of several component applications such as management evaluation; appropriate background investigative requirements; occupational health examination and laboratory testing; drug/alcohol screening; psychological testing and interviews; polygraph examination; job related aberrant behaviour recognition; on-going education and training; document control; drug/alcohol rehabilitation; periodic HRP audit; and implementation of an onsite central clearing house. The components and effects of HRP are discussed in further detail in this paper

  18. MODELING OF SYSTEM COMPONENTS OF EDUCATIONAL PROGRAMS IN HIGH SCHOOL

    Directory of Open Access Journals (Sweden)

    E. K. Samerkhanova

    2016-01-01

    Full Text Available Based on the principles of System Studies, describes the components of the educational programs of the control system. Educational Program Management is a set of substantive, procedural, resource, subject-activity, efficiently and evaluation components, which ensures the integrity of integration processes at all levels of education. Ensuring stability and development in the management of educational programs is achieved by identifying and securing social norms, the status of the educational institution program managers to ensure the achievement of modern quality of education.Content Management provides the relevant educational content in accordance with the requirements of the educational and professional standards; process control ensures the efficient organization of rational distribution process flows; Resource Management provides optimal distribution of personnel, information and methodological, material and technical equipment of the educational program; contingent management provides subject-activity interaction of participants of the educational process; quality control ensures the quality of educational services.

  19. How do eHealth Programs for Adolescents With Depression Work? A Realist Review of Persuasive System Design Components in Internet-Based Psychological Therapies.

    Science.gov (United States)

    Wozney, Lori; Huguet, Anna; Bennett, Kathryn; Radomski, Ashley D; Hartling, Lisa; Dyson, Michele; McGrath, Patrick J; Newton, Amanda S

    2017-08-09

    Major depressive disorders are common among adolescents and can impact all aspects of their daily life. Traditional therapies, cognitive behavioral therapy (CBT), and interpersonal psychotherapy (IPT) have been delivered face-to-face. However, Internet-based (online) delivery of these therapies is emerging as an option for adolescents. Internet-based CBT and IPT involve therapeutic content, interaction between the user and the system, and different technological features embedded into the online program (eg, multimedia). Studies of Internet-based CBT and IPT for adolescent depression differ on all three aspects, and variable, positive therapy effects have been reported. A better understanding of the treatment conditions that influence therapy outcomes is important to designing and evaluating these novel therapies. Our aim was to examine the technological and program delivery features of Internet-based CBT and IPT for adolescent depression and to document their potential relation to treatment outcomes and program use. We performed a realist synthesis. We started with an extensive search of published and gray literature. We included intervention studies that evaluated Internet-based CBT or IPT for adolescent depression. We included mixed-methods and qualitative studies, theoretical papers, and policy/implementation documents if they included a focus on how Internet-based psychological therapy is proposed to work for adolescents with depression/depressive symptoms. We used the Mixed-Methods Appraisal Tool to assess the methodological quality of studies. We used the Persuasive System Design (PSD) model as a framework for data extraction and analysis to examine how Internet-based CBT and IPT, as technology-based systems, influence the attitudes and behaviors of system users. PSD components described for the therapies were linked to reported outcomes using a cross-case comparison method and thematic synthesis. We identified 19 Internet-based CBT programs in 59 documents

  20. Faith Is Confidence: The Implication of Psychosocial Components in Faith-Based Educational Programs on Expressive Communication Skills of Adult Learners

    Science.gov (United States)

    Lynch, Erin M.

    2016-01-01

    Faith-based programs for adult learners have environmental factors that differentiate them from non-faith based programs, but explicit empirical studies evaluating the impact of the psychosocial factors have been lacking in the literature. This study comparatively examines the achievement level of expressive communication skills as measured…

  1. A classification of components of workplace disability management programs

    DEFF Research Database (Denmark)

    Gensby, U; Labriola, Merete; Irvin, E

    2014-01-01

    Purpose: This paper presents results from a Campbell systematic review on the nature and effectiveness of workplace disability management programs (WPDM) promoting return to work (RTW), as implemented and practiced by employers. A classification of WPDM program components, based on the review...... were conducted in pairs of reviewers. Studies were clustered around various dimensions of the design and context of programs. Results: 16,932 records were identified by the initial search. 599 papers were assessed for relevance. Thirteen studies met inclusion criteria. Twelve peer reviewed articles...

  2. Formalization in Component Based Development

    DEFF Research Database (Denmark)

    Holmegaard, Jens Peter; Knudsen, John; Makowski, Piotr

    2006-01-01

    We present a unifying conceptual framework for components, component interfaces, contracts and composition of components by focusing on the collection of properties or qualities that they must share. A specific property, such as signature, functionality behaviour or timing is an aspect. Each aspect...... may be specified in a formal language convenient for its purpose and, in principle, unrelated to languages for other aspects. Each aspect forms its own semantic domain, although a semantic domain may be parameterized by values derived from other aspects. The proposed conceptual framework is introduced...

  3. Scientific data base for safeguards components

    International Nuclear Information System (INIS)

    Hall, R.C.; Jones, R.D.

    1978-01-01

    The need to store and maintain vast amounts of data and the desire to avoid nonfunctional redundancy have provided an impetus for modern data base technology. Large-scale data base management systems (DBMS) have emerged during the past two decades evolving from earlier generalized file processing systems. This evolution has primarily involved certain business applications (e.g., production control, payroll, order entry) because of their high volume data processing characterization. Current data base technology, however, is becoming increasingly concerned with generality. Many diverse applications, including scientific ones, are benefiting from the generalized data base management software which has resulted. The concept of a data base management system is examined. The three common models which have been proposed for organizing data and relationships are identified: the network model, the hierarchical model, and the relational model. A specific implementation using a hierarchical data base management system is described. This is the data base for safeguards components which has been developed at Sandia Laboratories using the System 2000 developed by MRI Systems Corporation. Its organization, components, and functions are presented. The various interfaces it permits to user programs (e.g., safeguards automated facility evaluation software) and interactive terminal users are described

  4. Component protection based automatic control

    International Nuclear Information System (INIS)

    Otaduy, P.J.

    1992-01-01

    Control and safety systems as well as operation procedures are designed on the basis of critical process parameters limits. The expectation is that short and long term mechanical damage and process failures will be avoided by operating the plant within the specified constraints envelopes. In this paper, one of the Advanced Liquid Metal Reactor (ALMR) design duty cycles events is discussed to corroborate that the time has come to explicitly make component protection part of the control system. Component stress assessment and aging data should be an integral part of the control system. Then transient trajectory planning and operating limits could be aimed at minimizing component specific and overall plant component damage cost functions. The impact of transients on critical components could then be managed according to plant lifetime design goals. The need for developing methodologies for online transient trajectory planning and assessment of operating limits in order to facilitate the explicit incorporation of damage assessment capabilities to the plant control and protection systems is discussed. 12 refs

  5. Java Decaffeinated: experiences building a programming language from components

    OpenAIRE

    Farragher, Linda; Dobson, Simon

    2000-01-01

    non-peer-reviewed Most modern programming languages are complex and feature rich. Whilst this is (sometimes) an advantage for industrial-strength applications, it complicates both language teaching and language research. We describe our experiences in the design of a reduced sub-set of the Java language and its implementation using the Vanilla language development framework. We argue that Vanilla???s component-based approach allows the language???s feature set to be varied quickly and simp...

  6. Health insurers promoting employee wellness: strategies, program components and results.

    Science.gov (United States)

    Murphy, Brigid M; Schoenman, Julie A; Pirani, Hafiza

    2010-01-01

    To examine health insurance companies' role in employee wellness. Case studies of eight insurers. Wellness activities in work, clinical, online, and telephonic settings. Senior executives and wellness program leaders from Blue Cross Blue Shield health insurers and from one wellness organization. Telephone interviews with 20 informants. Health insurers were engaged in wellness as part of their mission to promote health and reduce health care costs. Program components included the following: education, health risk assessments, incentives, coaching, environmental consultation, targeted programming, onsite biometric screening, professional support, and full-time wellness staff. Programs relied almost exclusively on positive incentives to encourage participation. Results included participation rates as high as 90%, return on investment ranging from $1.09 to $1.65, and improved health outcomes. Health insurers have expertise in developing, implementing, and marketing health programs and have wide access to employers and their employees' health data. These capabilities make health insurers particularly well equipped to expand the reach of wellness programming to improve the health of many Americans. By coupling members' medical data with wellness-program data, health insurers can better understand an individual's health status to develop and deliver targeted interventions. Through program evaluation, health insurers can also contribute to the limited but growing evidence base on employee wellness programs.

  7. A component-based groupware development methodology

    NARCIS (Netherlands)

    Guareis de farias, Cléver; Ferreira Pires, Luis; van Sinderen, Marten J.

    2000-01-01

    Software development in general and groupware applications in particular can greatly benefit from the reusability and interoperability aspects associated with software components. Component-based software development enables the construction of software artefacts by assembling prefabricated,

  8. Components of Program for Analysis of Spectra and Their Testing

    Directory of Open Access Journals (Sweden)

    Ivan Taufer

    2013-11-01

    Full Text Available The spectral analysis of aqueous solutions of multi-component mixtures is used for identification and distinguishing of individual componentsin the mixture and subsequent determination of protonation constants and absorptivities of differently protonated particles in the solution in steadystate (Meloun and Havel 1985, (Leggett 1985. Apart from that also determined are the distribution diagrams, i.e. concentration proportions ofthe individual components at different pH values. The spectra are measured with various concentrations of the basic components (one or severalpolyvalent weak acids or bases and various pH values within the chosen range of wavelengths. The obtained absorbance response area has to beanalyzed by non-linear regression using specialized algorithms. These algorithms have to meet certain requirements concerning the possibility ofcalculations and the level of outputs. A typical example is the SQUAD(84 program, which was gradually modified and extended, see, e.g., (Melounet al. 1986, (Meloun et al. 2012.

  9. Manufacture of components for Canadian reactor programs

    International Nuclear Information System (INIS)

    Perry, L.P.

    Design features, especially those relating to calandrias, are pointed out for many CANDU-type reactors and the Taiwan research reactor. The special requirements shouldered by the Canadian suppliers of heavy reactor components are analyzed. (E.C.B.)

  10. Understanding science teacher enhancement programs: Essential components and a model

    Science.gov (United States)

    Spiegel, Samuel Albert

    Researchers and practioners alike recognize that "the national goal that every child in the United States has access to high-quality school education in science and mathematics cannot be realized without the availability of effective professional development of teachers" (Hewson, 1997, p. 16). Further, there is a plethora of reports calling for the improvement of professional development efforts (Guskey & Huberman, 1995; Kyle, 1995; Loucks-Horsley, Hewson, Love, & Stiles, 1997). In this study I analyze a successful 3-year teacher enhancement program, one form of professional development, to: (1) identify essential components of an effective teacher enhancement program; and (2) create a model to identify and articulate the critical issues in designing, implementing, and evaluating teacher enhancement programs. Five primary sources of information were converted into data: (1) exit questionnaires, (2) exit surveys, (3) exit interview transcripts, (4) focus group transcripts, and (5) other artifacts. Additionally, a focus group was used to conduct member checks. Data were analyzed in an iterative process which led to the development of the list of essential components. The Components are categorized by three organizers: Structure (e.g., science research experience, a mediator throughout the program), Context (e.g., intensity, collaboration), and Participant Interpretation (e.g., perceived to be "safe" to examine personal beliefs and practices, actively engaged). The model is based on: (1) a 4-year study of a successful teacher enhancement program; (2) an analysis of professional development efforts reported in the literature; and (3) reflective discussions with implementors, evaluators, and participants of professional development programs. The model consists of three perspectives, cognitive, symbolic interaction, and organizational, representing different viewpoints from which to consider issues relevant to the success of a teacher enhancement program. These

  11. The Collection of Data for the Research Component of the Internet-Based, ``Doctor of Astronomy'' Professional Degree Program at James Cook University

    Science.gov (United States)

    Millar, W.; White, G. L.; Filipović, M. D.; Hons, A.

    2008-06-01

    We discuss the means by which students collect, analyze and use original data to fulfill the research component of the Internet-based, professional ``Doctor of Astronomy'' degree, at the James Cook University Centre for Astronomy. We give an example of such data obtained with the 1.9 meter telescope at the South African Astronomical Observatory. We also discuss the use of such data in an introductory level astronomy class at a community college.

  12. Graphene-based spintronic components

    OpenAIRE

    Zeng, Minggang; Shen, Lei; Su, Haibin; Zhou, Miao; Zhang, Chun; Feng, Yuanping

    2010-01-01

    A major challenge of spintronics is in generating, controlling and detecting spin-polarized current. Manipulation of spin-polarized current, in particular, is difficult. We demonstrate here, based on calculated transport properties of graphene nanoribbons, that nearly +-100% spin-polarized current can be generated in zigzag graphene nanoribbons (ZGNRs) and tuned by a source-drain voltage in the bipolar spin diode, in addition to magnetic configurations of the electrodes. This unusual transpor...

  13. The artifacts of component-based development

    International Nuclear Information System (INIS)

    Rizwan, M.; Qureshi, J.; Hayat, S.A.

    2007-01-01

    Component based development idea was floated in a conference name Mass Produced Software Components in 1968 (1). Since then engineering and scientific libraries are developed to reuse the previously developed functions. This concept is now widely used in SW development as component based development (CBD). Component-based software engineering (CBSE) is used to develop/ assemble software from existing components (2). Software developed using components is called component where (3). This paper presents different architectures of CBD such as Active X, common object request broker architecture (CORBA), remote method invocation (RMI) and simple object access protocol (SOAP). The overall objective of this paper is to support the practice of CBD by comparing its advantages and disadvantages. This paper also evaluates object oriented process model to adapt it for CBD. (author)

  14. Higher-Order Components for Grid Programming

    CERN Document Server

    Dünnweber, Jan

    2009-01-01

    Higher-Order Components were developed within the CoreGRID European Network of Excellence and have become an optional extension of the popular Globus middleware. This book provides the reader with hands-on experience, describing a collection of example applications from various fields of science and engineering, including biology and physics.

  15. A Component-Oriented Programming for Embedded Mobile Robot Software

    Directory of Open Access Journals (Sweden)

    Safaai Deris

    2008-11-01

    Full Text Available Applying software reuse to many Embedded Real-Time (ERT systems poses significant challenges to industrial software processes due to the resource-constrained and real-time requirements of the systems. Autonomous Mobile Robot (AMR system is a class of ERT systems, hence, inherits the challenge of applying software reuse in general ERT systems. Furthermore, software reuse in AMR systems is challenged by the diversities in terms of robot physical size and shape, environmental interaction and implementation platform. Thus, it is envisioned that component-based software engineering will be the suitable way to promote software reuse in AMR systems with consideration to general requirements to be self-contained, platform-independent and real-time predictable. A framework for component-oriented programming for AMR software development using PECOS component model is proposed in this paper. The main features of this framework are: (1 use graphical representation for components definition and composition; (2 target C language for optimal code generation with resource-constrained micro-controller; and (3 minimal requirement for run-time support. Real-time implementation indicates that, the PECOS component model together with the proposed framework is suitable for resource constrained embedded AMR systems software development.

  16. Product costing program for wood component manufacturers

    Science.gov (United States)

    Adrienn Andersch; Urs Buehlmann; Jeff Palmer; Janice K Wiedenbeck; Steve. Lawser

    2013-01-01

    Accurate and timely product costing information is critically important for companies in planning the optimal utilization of company resources. While an overestimation of product costs can lead to loss of potential business and market share, underestimation of product costs can result in financial losses to the company. This article introduces a product costing program...

  17. 24 CFR 585.3 - Program components.

    Science.gov (United States)

    2010-04-01

    ... apprenticeship programs where possible. (b) Leadership training, counseling and other support activities, including: (1) Activities designed to develop employment and leadership skills, including support for youth councils; (2) Counseling services to assist trainees in personal, health, housing, child care, family or...

  18. 34 CFR 200.28 - Schoolwide program components.

    Science.gov (United States)

    2010-07-01

    ... instructional program. (c) Parental involvement. (1) A schoolwide program must involve parents in the planning... 34 Education 1 2010-07-01 2010-07-01 false Schoolwide program components. 200.28 Section 200.28 Education Regulations of the Offices of the Department of Education OFFICE OF ELEMENTARY AND SECONDARY...

  19. The Component-Based Application for GAMESS

    Energy Technology Data Exchange (ETDEWEB)

    Peng, Fang [Iowa State Univ., Ames, IA (United States)

    2007-01-01

    GAMESS, a quantum chetnistry program for electronic structure calculations, has been freely shared by high-performance application scientists for over twenty years. It provides a rich set of functionalities and can be run on a variety of parallel platforms through a distributed data interface. While a chemistry computation is sophisticated and hard to develop, the resource sharing among different chemistry packages will accelerate the development of new computations and encourage the cooperation of scientists from universities and laboratories. Common Component Architecture (CCA) offers an enviromnent that allows scientific packages to dynamically interact with each other through components, which enable dynamic coupling of GAMESS with other chetnistry packages, such as MPQC and NWChem. Conceptually, a cotnputation can be constructed with "plug-and-play" components from scientific packages and require more than componentizing functions/subroutines of interest, especially for large-scale scientific packages with a long development history. In this research, we present our efforts to construct cotnponents for GAMESS that conform to the CCA specification. The goal is to enable the fine-grained interoperability between three quantum chemistry programs, GAMESS, MPQC and NWChem, via components. We focus on one of the three packages, GAMESS; delineate the structure of GAMESS computations, followed by our approaches to its component development. Then we use GAMESS as the driver to interoperate integral components from the other tw"o packages, arid show the solutions for interoperability problems along with preliminary results. To justify the versatility of the design, the Tuning and Analysis Utility (TAU) components have been coupled with GAMESS and its components, so that the performance of GAMESS and its components may be analyzed for a wide range of systetn parameters.

  20. Laser based refurbishment of steel mill components

    CSIR Research Space (South Africa)

    Kazadi, P

    2006-03-01

    Full Text Available Laser refurbishment capabilities were demonstrated and promising results were obtained for repair of distance sleeves, foot rolls, descaler cassette, idler rolls. Based on the cost projections and the results of the in-situ testing, components which...

  1. Structured Performance Analysis for Component Based Systems

    OpenAIRE

    Salmi , N.; Moreaux , Patrice; Ioualalen , M.

    2012-01-01

    International audience; The Component Based System (CBS) paradigm is now largely used to design software systems. In addition, performance and behavioural analysis remains a required step for the design and the construction of efficient systems. This is especially the case of CBS, which involve interconnected components running concurrent processes. % This paper proposes a compositional method for modeling and structured performance analysis of CBS. Modeling is based on Stochastic Well-formed...

  2. National Nanotechnology Initiative Investments by Agency and Program Component Area

    Data.gov (United States)

    Office of Science and Technology Policy, Executive Office of the President — Data represents National Nanotechnology Initiative investments by agency and program component area (PCA) from FY 2001 through FY 2010 (requested). While this data...

  3. Modular Engine Noise Component Prediction System (MCP) Program Users' Guide

    Science.gov (United States)

    Golub, Robert A. (Technical Monitor); Herkes, William H.; Reed, David H.

    2004-01-01

    This is a user's manual for Modular Engine Noise Component Prediction System (MCP). This computer code allows the user to predict turbofan engine noise estimates. The program is based on an empirical procedure that has evolved over many years at The Boeing Company. The data used to develop the procedure include both full-scale engine data and small-scale model data, and include testing done by Boeing, by the engine manufacturers, and by NASA. In order to generate a noise estimate, the user specifies the appropriate engine properties (including both geometry and performance parameters), the microphone locations, the atmospheric conditions, and certain data processing options. The version of the program described here allows the user to predict three components: inlet-radiated fan noise, aft-radiated fan noise, and jet noise. MCP predicts one-third octave band noise levels over the frequency range of 50 to 10,000 Hertz. It also calculates overall sound pressure levels and certain subjective noise metrics (e.g., perceived noise levels).

  4. Lifestyles Based on Health Components in Iran

    Directory of Open Access Journals (Sweden)

    Babaei

    2016-07-01

    Full Text Available Context Lifestyle is a way employed by people, groups and nations and is formed in specific geographical, economic, political, cultural and religious texts. Health depends on lifestyle and is essential to preserve and promote health and improve lifestyle. Objectives The present study aimed to investigate lifestyle based on health-oriented components in Iran. Data Sources The research was conducted through E-banks including scientific information database (SID, Iran medical science databank (Iran Medex, Iran journal databank (Magiran and other databases such as Elsevier, PubMed and google scholar meta search engine regarding the subject from 2000 to 2014. Moreover, Official Iranian statistics and information were applied. The search terms used included lifestyle, health, health promoting behaviors, health-oriented lifestyle and lifestyle in Iran. Study Selection In the primary research, many papers were observed out of which 157 (120 in Farsi and 37 in English were selected. Data Extraction Following the careful study of these papers and excluding the unqualified papers, 19 papers with thorough information and higher relevance with the research purpose were selected. Results After examining articles based on the selected keywords and search strategies, 215 articles (134 in Farsi and 81 in English were obtained. Components of lifestyle and health are increasing in recent years; therefore, 8 (42% and 11 (58% articles were published during 2005 - 2010 and 2011 - 2014, respectively. Among them, there were 3 (16%, 8 (42%, 2 (10.5%, 2 (10.5% and 0 articles on the review of literature, descriptive-analytic, qualitative, analytic and descriptive articles, respectively. Conclusions Due to positive effect of healthy lifestyle on health promotion of individuals, it would be better for the government to provide comprehensive programs and policies in the society to enhance awareness of people about positive effects of health-oriented lifestyle on life and

  5. An Evaluation of "Success and Dyslexia"--A Multi Component School-Based Coping Program for Primary School Students with Learning Disabilities: Is It Feasible?

    Science.gov (United States)

    Firth, Nola Virginia; Frydenberg, Erica; Bond, Lyndal

    2012-01-01

    A learning disabilities coping program was implemented in the final year of two primary schools within the context of a whole class coping program and whole school learning disabilities professional development. Using data collected over three years from school surveys, reports, interviews, school documents and a field diary, this paper reports on…

  6. Financing Competency Based Programs.

    Science.gov (United States)

    Daniel, Annette

    Literature on the background, causes, and current prevalence of competency based programs is synthesized in this report. According to one analysis of the actual and probable costs of minimum competency testing, estimated costs for test development, test administration, bureaucratic structures, and remedial programs for students who cannot pass the…

  7. Component-Based Cartoon Face Generation

    Directory of Open Access Journals (Sweden)

    Saman Sepehri Nejad

    2016-11-01

    Full Text Available In this paper, we present a cartoon face generation method that stands on a component-based facial feature extraction approach. Given a frontal face image as an input, our proposed system has the following stages. First, face features are extracted using an extended Active Shape Model. Outlines of the components are locally modified using edge detection, template matching and Hermit interpolation. This modification enhances the diversity of output and accuracy of the component matching required for cartoon generation. Second, to bring cartoon-specific features such as shadows, highlights and, especially, stylish drawing, an array of various face photographs and corresponding hand-drawn cartoon faces are collected. These cartoon templates are automatically decomposed into cartoon components using our proposed method for parameterizing cartoon samples, which is fast and simple. Then, using shape matching methods, the appropriate cartoon component is selected and deformed to fit the input face. Finally, a cartoon face is rendered in a vector format using the rendering rules of the selected template. Experimental results demonstrate effectiveness of our approach in generating life-like cartoon faces.

  8. Selection of components based on their importance

    International Nuclear Information System (INIS)

    Stvan, F.

    2004-12-01

    A proposal is presented for sorting components of the Dukovany nuclear power plant with respect to their importance. The classification scheme includes property priority, property criticality and property structure. Each area has its criteria with weight coefficients to calculate the importance of each component by the Risk Priority Number method. The aim of the process is to generate a list of components in order of operating and safety importance, which will help spend funds to ensure operation and safety in an optimal manner. This proposal is linked to a proposal for a simple database which should serve to enter information and perform assessments. The present stage focused on a safety assessment of components categorized in safety classes BT1, BT2 and BT3 pursuant to Decree No. 76. Assessment was performed based ona PSE study for Level 1. The database includes inputs for entering financial data, which are represented by a potential damage resulting from the given failure and by the loss of MWh in financial terms. In a next input, the failure incidence intensity and time of correction can be entered. Information regarding the property structure, represented by the degree of backup and reparability of the component, is the last input available

  9. The effect of a multi-component camp-based weight-loss program on children's motor skills and physical fitness

    DEFF Research Database (Denmark)

    Larsen, Kristian Traberg; Huang, Tao; Larsen, Lisbeth Runge

    2016-01-01

    BACKGROUND: Many weight-loss programs in children are performed without specific foci on training both physical fitness and motor skills. The aim of this study was to describe the effect of a one-year weight-loss program on children's motor skills and physical fitness. METHODS: Participants......-respiratory fitness test. Motor skills were assessed by the Movement Assessment Battery for Children - second edition (M-ABC-2), age band 3. RESULTS: Loss to follow-up after 52 weeks was 19 % and 32 % in the DCIA and SIA, respectively. Balance skills were improved post-camp, but not after 52 weeks in children from....... CONCLUSION: In conclusion, the day-camp intervention led to improvements in physical fitness but not in motor skills compared to the standard intervention. Including both motor skills and physical fitness could advantageously be considered in future immersive intervention programmes. TRIAL REGISTRATION...

  10. Off-line programming and simulation in handling nuclear components

    International Nuclear Information System (INIS)

    Baker, C.P.

    1993-10-01

    IGRIP was used to create a simulation of the robotic workcell design for handling components at the PANTEX nuclear arms facility. This initial simulation identified problems with the customer's proposed worker layout, and allowed a correction to be proposed. Refinement of the IGRIP simulation allowed the design and construction of a workcell mock-up and accurate off-line programming of the system. IGRIP's off-line programming capabilities are being used to develop the motion control code for the workcell. PNLs success in this area suggests that simulation and off-line programming may be valuable tools for developing robotics in some automation resistant industries

  11. Successful Bullying Prevention Programs: Influence of Research Design, Implementation Features, and Program Components

    Directory of Open Access Journals (Sweden)

    Bryanna Hahn Fox

    2012-12-01

    Full Text Available Bullying prevention programs have been shown to be generally effective in reducing bullying and victimization. However, the effects are relatively small in randomized experiments and greater in quasi-experimental and age-cohort designs. Programs that are more intensive and of longer duration (for both children and teachers are more effective, as are programs containing more components. Several program components are associated with large effect sizes, including parent training or meetings and teacher training. These results should inform the design and evaluation of anti-bullying programs in the future, and a system ofaccreditation of effective programs.

  12. Development of components for the gas-cooled fast breeder reactor program

    International Nuclear Information System (INIS)

    Dee, J.B.; Macken, T.

    1977-01-01

    The gas-cooled fast breeder reactor (GCFR) component development program is based on an extension of high temperature gas-cooled reactor (HTGR) component technology; therefore, the GCFR development program is addressed primarily to components which differ in design and requirements from HTGR components. The principal differences in primary system components are due to the increase in helium coolant pressure level, which benefits system size and efficiency in the GCFR, and differences in the reactor internals and fuel handling systems due to the use of the compact metal-clad core. The purpose of this paper is to present an overview of the principal component design differences between the GCFR and HTGR and the consequent influences of these differences on GCFR component development programs. Development program plans are discussed and include those for the prestressed concrete reactor vessel (PCRV), the main helium circulator and its supporting systems, the steam generators, the reactor thermal shielding, and the fuel handling system. Facility requirements to support these development programs are also discussed. Studies to date show that GCFR component development continues to appear to be incremental in nature, and the required tests are adaptations of related HTGR test programs. (Auth.)

  13. Critical Components of a Summer Enrichment Program for Urban Low-Income Gifted Students

    Science.gov (United States)

    Kaul, Corina R.; Johnsen, Susan K.; Witte, Mary M.; Saxon, Terrill F.

    2015-01-01

    Effective program models are needed for low-income youth. This article describes one successful summer enrichment program, University for Young People's Project Promise, and outlines three key components of a Partnership for Promoting Potential in Low-Income Gifted Students (Partnership Model), which is based on Lee, Olszewski-Kubilius, and…

  14. School lunch program in India: background, objectives and components.

    Science.gov (United States)

    Chutani, Alka Mohan

    2012-01-01

    The School Lunch Program in India (SLP) is the largest food and nutrition assistance program feeding millions of children every day. This paper provides a review of the background information on the SLP in India earlier known as national program for nutrition support to primary education (NP-NSPE) and later as mid day meal scheme, including historical trends and objectives and components/characteristics of the scheme. It also addresses steps being taken to meet challenges being faced by the administrators of the program in monitoring and evaluation of the program. This program was initially started in 1960 in few states to overcome the complex problems malnutrition and illiteracy. Mid Day Meal Scheme is the popular name for school meal program. In 2001, as per the supreme court orders, it became mandatory to give a mid day meal to all primary and later extended to upper primary school children studying in the government and government aided schools. This scheme benefitted 140 million children in government assisted schools across India in 2008, strengthening child nutrition and literacy. In a country with a large percent of illiterate population with a high percent of children unable to read or write; governmental and non-governmental organizations have reported that mid day meal scheme has consistently increased enrollment in schools in India. One of the main goals of school lunch program is to promote the health and well-being of the Nation's children.

  15. Risk Management Program Application for the Component Test Capability

    International Nuclear Information System (INIS)

    Stephanie L. Austad; Jeffrey D. Bryan

    2009-01-01

    This paper documents the application of the risk management program requirements to Component Test Capability (CTC) Project activities for each CTC alternative. In particular, DOE O 413.3A, 'Program and Project Management for the Acquisition of Capital Assets,' and DOE G 413.3-7, 'Risk Management Guide for Project Management,' will apply in the event that Alternative 4, Single, Standalone Component Test Facility (CTF), is selected and approved. As such, it is advisable to begin planning to meet the associated Department of Energy (DOE) requirements and guidance as early in the acquisition process as practicable. This white paper is intended to assist in this planning and to support associated decision-making activities. Nontechnical risks associated with each alternative will be identified to support the Next Generation Nuclear Plant (NGNP) CTC alternatives analysis. Technical risks are assumed to be addressed through the Technology Development Risk Management modeling process and are inherent to the alternatives

  16. An evaluation of costs and effects of a nutrient-based skin care program as a component of prevention of skin tears in an extended convalescent center.

    Science.gov (United States)

    Groom, Marjorie; Shannon, Ronald J; Chakravarthy, Debashish; Fleck, Cynthia A

    2010-01-01

    A decision model was developed in a pilot study comparing a regimen using a skin care product line containing active ingredients and nutrients with a commercially available alternative skin care regimen in an elderly convalescent care hospital-based center. Using a decision-tree model, skin treatment with a nutrient-based skin care (NBSC) formulation was compared with products without nutrients. The number of skin-tear-free days was the primary outcome measure. A cost-effectiveness ratio was calculated for each skin treatment as the average cost for reaching a particular outcome. Incidence of skin tear data was collected from residents in a convalescent center from 2004 to 2005. An independent t test was used to compare differences in the number of skin tears between periods when NBSC and other formulations were used. All costs in the decision model were adjusted to 2007 dollars. Sensitivity analysis was used to test uncertain data. The NBSC provided more skin-tear-free days and was less costly than the use of non-NBSC products. The expected skin-tear-free days for a patient in the model treated with NBSC were 179.7 days compared with 154.6 days for non-NBSC products, yielding an incremental effect of 25.1 days. The expected cost of preventing skin tears and treatment via skin treatment per patient in the NBSC group was $281.00 versus $324.10 for periods when other products were used. The NBSC had a lower projected cost for prevention of skin tears and more skin-tear-free days when compared with non-NBSC products.

  17. A systematic approach for component-based software development

    NARCIS (Netherlands)

    Guareis de farias, Cléver; van Sinderen, Marten J.; Ferreira Pires, Luis

    2000-01-01

    Component-based software development enables the construction of software artefacts by assembling prefabricated, configurable and independently evolving building blocks, called software components. This paper presents an approach for the development of component-based software artefacts. This

  18. A Combined Approach for Component-based Software Design

    NARCIS (Netherlands)

    Guareis de farias, Cléver; van Sinderen, Marten J.; Ferreira Pires, Luis; Quartel, Dick; Baldoni, R.

    2001-01-01

    Component-based software development enables the construction of software artefacts by assembling binary units of production, distribution and deployment, the so-called software components. Several approaches addressing component-based development have been proposed recently. Most of these

  19. Seismic component fragility data base for IPEEE

    International Nuclear Information System (INIS)

    Bandyopadhyay, K.; Hofmayer, C.

    1990-01-01

    Seismic probabilistic risk assessment or a seismic margin study will require a reliable data base of seismic fragility of various equipment classes. Brookhaven National Laboratory (BNL) has selected a group of equipment and generically evaluated the seismic fragility of each equipment class by use of existing test data. This paper briefly discusses the evaluation methodology and the fragility results. The fragility analysis results when used in the Individual Plant Examination for External Events (IPEEE) Program for nuclear power plants are expected to provide insights into seismic vulnerabilities of equipment for earthquakes beyond the design basis. 3 refs., 1 fig., 1 tab

  20. Ageing management program for reactor components in HANARO

    International Nuclear Information System (INIS)

    Cho, Yeong-Garp; Wu, Sang-Ik; Lee, Jung-Hee; Ryu, Jeong-Soo; Park, Yong-Chul; Wu, Jong-Sup; Jun, Byung Jin

    2003-01-01

    The HANARO, an open-tank-in-pool type research reactor of 30MWth power in Korea, has operated for 8 years since its initial criticality in February of 1995. The reactor power has been gradually increased to 24 MWth through the service period. Therefore the reactor age is very young from the viewpoint of the ageing effect on the reactor structure and components by neutron irradiation considering the expected reactor lifetime. But, we have a few programs to manage the ageing from the aspect of design lifetime of reactor components. This paper summarizes the overall progress and plan for the ageing management for the reactor components including lifetime extension and design improvement, remote measurements and in-service inspections. The shutoff units and control absorber units have aged more rapidly than other structures or components because the number of rod drop cycles was higher than expected at the design stage. The system commissioning tests, periodic performance tests, and weekly operation for the stable supply of medical radioisotopes overriding the normal cycle operation have contributed to the high frequency of rod drop. Therefore, we have instituted a program to extend the lifetime of the shutoff units and the control absorber units. This program includes an endurance test to verify the performance for the extended number of drops and the management of shutdown methods to minimize the drop cycles for both the shutoff units and the control absorber units. The program also includes the design improvement of the damper mechanism of the control absorber units to reduce the impact force caused by rod drop. The inner shell of the reflector vessel surrounding the core is the most critical part from the viewpoint of neutron irradiation. The periodic measurement of the dimensional change in the vertical straightness of the inner shell is considered as one of the in-service inspections. We developed a few tools and verified the performance to measure the

  1. The data collection component of the Hanford Meteorology Monitoring Program

    Energy Technology Data Exchange (ETDEWEB)

    Glantz, C.S.; Islam, M.M.

    1988-09-01

    An intensive program of meteorological monitoring is in place at the US Department of Energy's Hanford Site. The Hanford Meteorology Monitoring Program involves the measurement, observation, and storage of various meteorological data; continuous monitoring of regional weather conditions by a staff of professional meteorologists; and around-the-clock forecasting of weather conditions for the Hanford Site. The objective of this report is to document the data collection component of the program. In this report, each meteorological monitoring site is discussed in detail. Each site's location and instrumentation are described and photographs are presented. The methods for processing and communicating data to the Hanford Meteorology Station are also discussed. Finally, the procedures followed to maintain and calibrate these instruments are presented. 2 refs., 83 figs., 15 tabs.

  2. Computer software program for monitoring the availability of systems and components of electric power generating systems

    International Nuclear Information System (INIS)

    Petersen, T.A.; Hilsmeier, T.A.; Kapinus, D.M.

    1994-01-01

    As availabilities of electric power generating stations systems and components become more and more important from a financial, personnel safety, and regulatory requirements standpoint, it is evident that a comprehensive, yet simple and user-friendly program for system and component tracking and monitoring is needed to assist in effectively managing the large volume of systems and components with their large numbers of associated maintenance/availability records. A user-friendly computer software program for system and component availability monitoring has been developed that calculates, displays and monitors selected component and system availabilities. This is a Windows trademark based (Graphical User Interface) program that utilizes a system flow diagram for the data input screen which also provides a visual representation of availability values and limits for the individual components and associated systems. This program can be customized to the user's plant-specific system and component selections and configurations. As will be discussed herein, this software program is well suited for availability monitoring and ultimately providing valuable information for improving plant performance and reducing operating costs

  3. Component failure data base of TRIGA reactors

    International Nuclear Information System (INIS)

    Djuricic, M.

    2004-10-01

    This compilation provides failure data such as first criticality, component type description (reactor component, population, cumulative calendar time, cumulative operating time, demands, failure mode, failures, failure rate, failure probability) and specific information on each type of component of TRIGA Mark-II reactors in Austria, Bangladesh, Germany, Finland, Indonesia, Italy, Indonesia, Slovenia and Romania. (nevyjel)

  4. Measurement and monitoring technologies are important SITE program component

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    An ongoing component of the Superfund Innovative Technologies Evaluation (SITE) Program, managed by the US EPA at its Hazardous Waste Engineering Research Laboratory in Cincinnati, is the development and demonstration of new and innovative measurement and monitoring technologies that will be applicable to Superfund site characterization. There are four important roles for monitoring and measurement technologies at Superfund sites: (1) to assess the extent of contamination at a site, (2) to supply data and information to determine impacts to human health and the environment, (3) to supply data to select the appropriate remedial action, and (4) to monitor the success or effectiveness of the selected remedy. The Environmental Monitoring Systems Laboratory in Las Vegas, Nevada (EMSL-LV) has been supporting the development of improved measurement and monitoring techniques in conjunction with the SITE Program with a focus on two areas: Immunoassay for toxic substances and fiber optic sensing for in-situ analysis at Superfund sites

  5. Process Evaluation for a Prison-based Substance Abuse Program.

    Science.gov (United States)

    Staton, Michele; Leukefeld, Carl; Logan, T. K.; Purvis, Rick

    2000-01-01

    Presents findings from a process evaluation conducted in a prison-based substance abuse program in Kentucky. Discusses key components in the program, including a detailed program description, modifications in planned treatment strategies, program documentation, and perspectives of staff and clients. Findings suggest that prison-based programs have…

  6. Integrated data base program

    International Nuclear Information System (INIS)

    Notz, K.J.

    1981-01-01

    The IDB Program provides direct support to the DOE Nuclear Waste Management and Fuel Cycle Programs and their lead sites and support contractors by providing and maintaining a current, integrated data base of spent fuel and radioactive waste inventories and projections. All major waste types (HLW, TRU, and LLW) and sources (government, commerical fuel cycle, and I/I) are included. A major data compilation was issued in September, 1981: Spent Fuel and Radioactive Waste Inventories and Projections as of December 31, 1980, DOE/NE-0017. This report includes chapters on Spent Fuel, HLW, TRU Waste, LLW, Remedial Action Waste, Active Uranium Mill Tailings, and Airborne Waste, plus Appendices with more detailed data in selected areas such as isotopics, radioactivity, thermal power, projections, and land usage. The LLW sections include volumes, radioactivity, thermal power, current inventories, projected inventories and characteristics, source terms, land requirements, and a breakdown in terms of government/commercial and defense/fuel cycle/I and I

  7. A classification of components of workplace disability management programs: results from a systematic review.

    Science.gov (United States)

    Gensby, U; Labriola, M; Irvin, E; Amick, B C; Lund, T

    2014-06-01

    This paper presents results from a Campbell systematic review on the nature and effectiveness of workplace disability management programs (WPDM) promoting return to work (RTW), as implemented and practiced by employers. A classification of WPDM program components, based on the review results, is proposed. Twelve databases were searched between 1948 to July 2010 for peer-reviewed studies of WPDM programs provided by employers to re-entering workers with occupational or non-occupational illnesses or injuries. Screening of articles, risk of bias assessment and data extraction were conducted in pairs of reviewers. Studies were clustered around various dimensions of the design and context of programs. 16,932 records were identified by the initial search. 599 papers were assessed for relevance. Thirteen studies met inclusion criteria. Twelve peer reviewed articles (two non-randomized studies, and ten single group experimental before and after studies), including ten different WPDM programs informed the synthesis of results. Narrative descriptions of the included program characteristics provided insight on program scope, components, procedures and human resources involved. However, there were insufficient data on the characteristics of the sample and the effect sizes were uncertain. A taxonomy classifying policies and practices around WPDM programs is proposed. There is insufficient evidence to draw conclusions on the effectiveness of employer provided WPDM programs promoting RTW. It was not possible to determine if specific program components or specific sets of components are driving effectiveness. The proposed taxonomy may guide future WPDM program evaluation and clarify the setup of programs offered to identify gaps in existing company strategies.

  8. Reactor materials program process water component failure probability

    International Nuclear Information System (INIS)

    Daugherty, W. L.

    1988-01-01

    The maximum rate loss of coolant accident for the Savannah River Production Reactors is presently specified as the abrupt double-ended guillotine break (DEGB) of a large process water pipe. This accident is not considered credible in light of the low applied stresses and the inherent ductility of the piping materials. The Reactor Materials Program was initiated to provide the technical basis for an alternate, credible maximum rate LOCA. The major thrust of this program is to develop an alternate worst case accident scenario by deterministic means. In addition, the probability of a DEGB is also being determined; to show that in addition to being mechanistically incredible, it is also highly improbable. The probability of a DEGB of the process water piping is evaluated in two parts: failure by direct means, and indirectly-induced failure. These two areas have been discussed in other reports. In addition, the frequency of a large bread (equivalent to a DEGB) in other process water system components is assessed. This report reviews the large break frequency for each component as well as the overall large break frequency for the reactor system

  9. Sodium components cleaning status in the Italian fast reactor program

    Energy Technology Data Exchange (ETDEWEB)

    De Luca, B [CNEN-RIT/MAT - Laboratorio Sviluppo Processi - C.S.N. Cassacia, Rome (Italy); Labanti, V [CNEN-DRV, Bologna (Italy); Mennucci, M [NIRA, Genoa (Italy)

    1978-08-01

    As a consequence of the Italian Fast Reactor Development, mainly aimed to the PEC project and to the participation in the French Superphenix project, it is of increasing importance to set up a reliable method for specific reactor components and related test loops. The first problem was the cleaning of the PEC fuelling machine. In order to perform the routine maintenance of the machine an alcohol cleaning method based on the use of 2-butoxyethanol-NN dimethylformamide mixture has been proposed.

  10. Structuring Serendipity: Mentoring as a Component of Leadership Development Programs in Higher Education

    Science.gov (United States)

    Bonebright, Denise A.

    2014-01-01

    The need to develop a pool of well-qualified future leaders is a key concern for human resource development scholars and practitioners in higher education. Research indicates that formal leadership development programs are most effective when they are based on experiential models. Mentoring is one experiential component that can enhance such…

  11. Components of a comprehensive capital equipment planning program.

    Science.gov (United States)

    Gresch, Alan

    2010-01-01

    As you may have already figured out, there is crossover and gaps between all of these capital equipment components. CE often will, and proactively should, make recommendations based on the CE, clinical, and financial components but rarely has direct knowledge of the strategic element. The clinical, finance, and administrative folks likely have visibility to most of these, but may lack full awareness of at least one component. The key is to engage key stakeholders from all these critical areas and develop a process to pull all this information together in one nice, neat package. Defining the person or persons responsible for taking the lead on this in your organization will depend greatly on the organization's type and size. For a single, standalone community hospital, it will likely be the facility administrator. For an integrated delivery network (IDN), a corporate entity, led by supply chain, finance, or both, may take the lead. Your organization may also employ consultative services or software to help facilitate this function. Regardless of who takes the lead, a weighting or scoring system that assigns certain values in all the outlined component categories, is clearly defined, and is easy to understand for all the contributors will need to be developed. If you are unaware or unclear of what the process is, find out and figure out how you can be a vital contributor to the process. This is one more way you can demonstrate the value you and your department bring to your organization.

  12. The development of component-based information systems

    CERN Document Server

    Cesare, Sergio de; Macredie, Robert

    2015-01-01

    This work provides a comprehensive overview of research and practical issues relating to component-based development information systems (CBIS). Spanning the organizational, developmental, and technical aspects of the subject, the original research included here provides fresh insights into successful CBIS technology and application. Part I covers component-based development methodologies and system architectures. Part II analyzes different aspects of managing component-based development. Part III investigates component-based development versus commercial off-the-shelf products (COTS), includi

  13. Advanced diesel engine component development program, tasks 4-14

    Science.gov (United States)

    Kaushal, Tony S.; Weber, Karen E.

    1994-01-01

    This report summarizes the Advanced Diesel Engine Component Development (ADECD) Program to develop and demonstrate critical technology needed to advance the heavy-duty low heat rejection engine concept. Major development activities reported are the design, analysis, and fabrication of monolithic ceramic components; vapor phase and solid film lubrication; electrohydraulic valve actuation; and high pressure common rail injection. An advanced single cylinder test bed was fabricated as a laboratory tool in studying these advanced technologies. This test bed simulates the reciprocator for a system having no cooling system, turbo compounding, Rankine bottoming cycle, common rail injection, and variable valve actuation to achieve fuel consumption of 160 g/kW-hr (.26 lb/hp-hr). The advanced concepts were successfully integrated into the test engine. All ceramic components met their functional and reliability requirements. The firedeck, cast-in-place ports, valves, valve guides, piston cap, and piston ring were made from silicon nitride. Breakthroughs required to implement a 'ceramic' engine included the fabrication of air-gap cylinder heads, elimination of compression gaskets, machining of ceramic valve seats within the ceramic firedeck, fabrication of cast-in-place ceramic port liners, implementation of vapor phase lubrication, and elimination of the engine coolant system. Silicon nitride valves were successfully developed to meet several production abuse test requirements and incorporated into the test bed with a ceramic valve guide and solid film lubrication. The ADECD cylinder head features ceramic port shields to increase insulation and exhaust energy recovery. The combustion chamber includes a ceramic firedeck and piston cap. The tribological challenge posed by top ring reversal temperatures of 550 C was met through the development of vapor phase lubrication using tricresyl phosphate at the ring-liner interface. A solenoid-controlled, variable valve actuation system

  14. Advanced diesel engine component development program, tasks 4-14

    Science.gov (United States)

    Kaushal, Tony S.; Weber, Karen E.

    1994-11-01

    This report summarizes the Advanced Diesel Engine Component Development (ADECD) Program to develop and demonstrate critical technology needed to advance the heavy-duty low heat rejection engine concept. Major development activities reported are the design, analysis, and fabrication of monolithic ceramic components; vapor phase and solid film lubrication; electrohydraulic valve actuation; and high pressure common rail injection. An advanced single cylinder test bed was fabricated as a laboratory tool in studying these advanced technologies. This test bed simulates the reciprocator for a system having no cooling system, turbo compounding, Rankine bottoming cycle, common rail injection, and variable valve actuation to achieve fuel consumption of 160 g/kW-hr (.26 lb/hp-hr). The advanced concepts were successfully integrated into the test engine. All ceramic components met their functional and reliability requirements. The firedeck, cast-in-place ports, valves, valve guides, piston cap, and piston ring were made from silicon nitride. Breakthroughs required to implement a 'ceramic' engine included the fabrication of air-gap cylinder heads, elimination of compression gaskets, machining of ceramic valve seats within the ceramic firedeck, fabrication of cast-in-place ceramic port liners, implementation of vapor phase lubrication, and elimination of the engine coolant system. Silicon nitride valves were successfully developed to meet several production abuse test requirements and incorporated into the test bed with a ceramic valve guide and solid film lubrication. The ADECD cylinder head features ceramic port shields to increase insulation and exhaust energy recovery. The combustion chamber includes a ceramic firedeck and piston cap. The tribological challenge posed by top ring reversal temperatures of 550 C was met through the development of vapor phase lubrication using tricresyl phosphate at the ring-liner interface. A solenoid-controlled, variable valve actuation system

  15. Base Research Program

    Energy Technology Data Exchange (ETDEWEB)

    Everett Sondreal; John Hendrikson

    2009-03-31

    In June 2009, the Energy & Environmental Research Center (EERC) completed 11 years of research under the U.S. Department of Energy (DOE) Base Cooperative Agreement No. DE-FC26-98FT40320 funded through the Office of Fossil Energy (OFE) and administered at the National Energy Technology Laboratory (NETL). A wide range of diverse research activities were performed under annual program plans approved by NETL in seven major task areas: (1) resource characterization and waste management, (2) air quality assessment and control, (3) advanced power systems, (4) advanced fuel forms, (5) value-added coproducts, (6) advanced materials, and (7) strategic studies. This report summarizes results of the 67 research subtasks and an additional 50 strategic studies. Selected highlights in the executive summary illustrate the contribution of the research to the energy industry in areas not adequately addressed by the private sector alone. During the period of performance of the agreement, concerns have mounted over the impact of carbon emissions on climate change, and new programs have been initiated by DOE to ensure that fossil fuel resources along with renewable resources can continue to supply the nation's transportation fuel and electric power. The agreement has addressed DOE goals for reductions in CO{sub 2} emissions through efficiency, capture, and sequestration while expanding the supply and use of domestic energy resources for energy security. It has further contributed to goals for near-zero emissions from highly efficient coal-fired power plants; environmental control capabilities for SO{sub 2}, NO{sub x}, fine respirable particulate (PM{sub 2.5}), and mercury; alternative transportation fuels including liquid synfuels and hydrogen; and synergistic integration of fossil and renewable resources (e.g., wind-, biomass-, and coal-based electrical generation).

  16. A refinement driven component-based design

    DEFF Research Database (Denmark)

    Chen, Zhenbang; Liu, Zhiming; Ravn, Anders Peter

    2007-01-01

    the work on the Common Component Modelling Example (CoCoME). This gives evidence that the formal techniques developed in rCOS can be integrated into a model-driven development process and shows where it may be integrated in computer-aided software engineering (CASE) tools for adding formally supported...

  17. Educational Technologies Based on Software Components

    Directory of Open Access Journals (Sweden)

    Marian DARDALA

    2006-01-01

    Full Text Available Informatics technologies allow to easily develop and adapt e-learning systems. In order to be used by any users, the system must be developed to permit the lessons construction in a dynamic way. The component technology is a solution to this problem and offers the possibility to define the basic objects that will be connected at the run time to develop the personalized e-lessons.

  18. Is Stacking Intervention Components Cost-Effective? An Analysis of the Incredible Years Program

    Science.gov (United States)

    Foster, E. Michael; Olchowski, Allison E.; Webster-Stratton, Carolyn H.

    2007-01-01

    The cost-effectiveness of delivering stacked multiple intervention components for children is compared to implementing single intervention by analyzing the Incredible Years Series program. The result suggests multiple intervention components are more cost-effective than single intervention components.

  19. Meta-analysis of graduated driver licensing laws: effectiveness of specific program components : traffic tech.

    Science.gov (United States)

    2015-11-01

    Graduated driver licensing (GDL) programs in the United States do not represent a single homogeneous intervention; rather, they contain different combinations and variations of program components. Programs vary by the duration of each stage of the GD...

  20. Component-based framework for subsurface simulations

    International Nuclear Information System (INIS)

    Palmer, B J; Fang, Yilin; Hammond, Glenn; Gurumoorthi, Vidhya

    2007-01-01

    Simulations in the subsurface environment represent a broad range of phenomena covering an equally broad range of scales. Developing modelling capabilities that can integrate models representing different phenomena acting at different scales present formidable challenges both from the algorithmic and computer science perspective. This paper will describe the development of an integrated framework that will be used to combine different models into a single simulation. Initial work has focused on creating two frameworks, one for performing smooth particle hydrodynamics (SPH) simulations of fluid systems, the other for performing grid-based continuum simulations of reactive subsurface flow. The SPH framework is based on a parallel code developed for doing pore scale simulations, the continuum grid-based framework is based on the STOMP (Subsurface Transport Over Multiple Phases) code developed at PNNL Future work will focus on combining the frameworks together to perform multiscale, multiphysics simulations of reactive subsurface flow

  1. Component-based development of software language engineering tools

    NARCIS (Netherlands)

    Ssanyu, J.; Hemerik, C.

    2011-01-01

    In this paper we outline how Software Language Engineering (SLE) could benefit from Component-based Software Development (CBSD) techniques and present an architecture aimed at developing a coherent set of lightweight SLE components, fitting into a general-purpose component framework. In order to

  2. Base isolation strategies for structures and components

    International Nuclear Information System (INIS)

    Varma, Veto; Reddy, G.R.; Vaze, K.K.; Kushwaha, H.S.

    2003-08-01

    In the present report the effect of laminated rubber bearing (LRB) system on the dynamic response of the structure was studied. A LRB system was designed and tested in the laboratory for its dynamic characteristics. Finite element analysis was also performed and based on this analysis, isolator for PHWR nuclear power plant was designed. Analysis of the building was performed with and without isolator. Comparison of responses was made in terms of frequencies, accelerations and displacements and floor response spectra. (author)

  3. Component-Based Approach in Learning Management System Development

    Science.gov (United States)

    Zaitseva, Larisa; Bule, Jekaterina; Makarov, Sergey

    2013-01-01

    The paper describes component-based approach (CBA) for learning management system development. Learning object as components of e-learning courses and their metadata is considered. The architecture of learning management system based on CBA being developed in Riga Technical University, namely its architecture, elements and possibilities are…

  4. IAEA's experience in compiling a generic component reliability data base

    International Nuclear Information System (INIS)

    Tomic, B.; Lederman, L.

    1991-01-01

    Reliability data are essential in probabilistic safety assessment, with component reliability parameters being particularly important. Component failure data which is plant specific would be most appropriate but this is rather limited. However, similar components are used in different designs. Generic data, that is all data that is not plant specific to the plant being analyzed but which relates to components more generally, is important. The International Atomic Energy Agency has compiled the Generic Component Reliability Data Base from data available in the open literature. It is part of the IAEA computer code package for fault/event tree analysis. The Data Base contains 1010 different records including most of the components used in probabilistic safety analyses of nuclear power plants. The data base input was quality controlled and data sources noted. The data compilation procedure and problems associated with using generic data are explained. (UK)

  5. A CORBA BASED ARCHITECTURE FOR ACCESSING REUSABLE SOFTWARE COMPONENTS ON THE WEB.

    Directory of Open Access Journals (Sweden)

    R. Cenk ERDUR

    2003-01-01

    Full Text Available In a very near future, as a result of the continious growth of Internet and advances in networking technologies, Internet will become the common software repository for people and organizations who employ component based reuse approach in their software development life cycles. In order to use the reusable components such as source codes, analysis, designs, design patterns during new software development processes, environments that support the identification of the components over Internet are needed. Basic elements of such an environment are the coordinator programs which deliver user requests to appropriate component libraries, user interfaces for querying, and programs that wrap the component libraries. First, a CORBA based architecture is proposed for such an environment. Then, an alternative architecture that is based on the Java 2 platform technologies is given for the same environment. Finally, the two architectures are compared.

  6. Generalized structured component analysis a component-based approach to structural equation modeling

    CERN Document Server

    Hwang, Heungsun

    2014-01-01

    Winner of the 2015 Sugiyama Meiko Award (Publication Award) of the Behaviormetric Society of Japan Developed by the authors, generalized structured component analysis is an alternative to two longstanding approaches to structural equation modeling: covariance structure analysis and partial least squares path modeling. Generalized structured component analysis allows researchers to evaluate the adequacy of a model as a whole, compare a model to alternative specifications, and conduct complex analyses in a straightforward manner. Generalized Structured Component Analysis: A Component-Based Approach to Structural Equation Modeling provides a detailed account of this novel statistical methodology and its various extensions. The authors present the theoretical underpinnings of generalized structured component analysis and demonstrate how it can be applied to various empirical examples. The book enables quantitative methodologists, applied researchers, and practitioners to grasp the basic concepts behind this new a...

  7. Canadian programs on understanding and managing aging degradation of nuclear power plant components

    International Nuclear Information System (INIS)

    Chadha, J.A.; Pachner, J.

    1989-06-01

    Maintaining adequate safety and reliability of nuclear power plants and nuclear power plant life assurance and life extension are growing in importance as nuclear plants get older. Age-related degradation of plant components is complex and not fully understood. This paper provides an overview of the Canadian approach and the main activities and their results towards understanding and managing age-related degradation of nuclear power plant components, structures and systems. A number of pro-active programs have been initiated to anticipate, detect and mitigate potential aging degradation at an early stage before any serious impact on plant safety and reliability. These programs include Operational Safety Management Program, Nuclear Plant Life Assurance Program, systematic plant condition assessment, refurbishment and upgrading, post-service examination and testing, equipment qualification, research and development, and participation in the IAEA programs on safety aspects of nuclear power plant aging and life extension. A regulatory policy on nuclear power plants is under development and will be based on the domestic as well as foreign and international studies and experience

  8. Commercial Video Programs: A Component to Enhance Language Skills.

    Science.gov (United States)

    Linares, H. A.

    After the passage of a resolution by the South Dakota Board of Regents to place greater emphasis on the study of foreign language, Northern State College introduced commercial video programs in Spanish for classroom use. After installing a parabolic antenna and the other necessary equipment, the department selected and edited a series of programs,…

  9. Trail Crews: Developing a Service Component to Your Program.

    Science.gov (United States)

    Boehringer, Brad; Merrill, Kurt

    Through wilderness stewardship programs, service projects, or trail crews, college outdoor programs can help land management agencies with their maintenance needs and provide student participants with rewarding service learning opportunities. Trail crews are usually composed of volunteer outdoor enthusiasts who take part in a multitude of…

  10. Conflict Resolution Education: A Component of Peer Programs

    Science.gov (United States)

    Mayorga, Mary G.; Oliver, Marvarene

    2006-01-01

    Conflict resolution programs are one part of peer programs offered in schools to enhance the development of life skills of students. This article addresses the need for and role of conflict resolution education in the schools. It then describes several approaches to conflict resolution education. A review of outcome research concerning conflict…

  11. Root Causes of Component Failures Program: Methods and applications

    International Nuclear Information System (INIS)

    Satterwhite, D.G.; Cadwallader, L.C.; Vesely, W.E.; Meale, B.M.

    1986-12-01

    This report contains information pertaining to definitions, methodologies, and applications of root cause analysis. Of specific interest, and highlighted throughout the discussion, are applications pertaining to current and future Nuclear Regulatory Commission (NRC) light water reactor safety programs. These applications are discussed in view of addressing specific program issues under NRC consideration and reflect current root cause analysis capabilities

  12. Application of quality assurance program to safety related aging equipment or components

    International Nuclear Information System (INIS)

    Papaiya, N.C.

    1990-01-01

    This paper addresses how quality assurance programs and their criteria are applied to safety related and aging equipment or components used in commercial nuclear plant applications. The QA Programs referred to are 10CFR50 Appendix B and EPRI NP-5652. The QA programs as applicable are applied to equipment/component aging qualification, preventive maintenance, surveillance testing and procurement engineering. The intent of this paper is not the technical issues, methods and research of aging. The paper addresses QA program's application to age-related equipment or components in safety related applications. Quality Assurance Program 10CFR50 Appendix B applies to all safety related aging components or equipment related to the qualification program and associated preventive maintenance and surveillance testing programs. Quality Assurance involvement with procurement engineering for age-related commercial grade items supports EPRI NP-5652 and assures that the dedicated OGI is equal to the item purchased as a basic component to 10CFR50 Appendix B requirements

  13. Reliability-based sensitivity of mechanical components with arbitrary distribution parameters

    International Nuclear Information System (INIS)

    Zhang, Yi Min; Yang, Zhou; Wen, Bang Chun; He, Xiang Dong; Liu, Qiaoling

    2010-01-01

    This paper presents a reliability-based sensitivity method for mechanical components with arbitrary distribution parameters. Techniques from the perturbation method, the Edgeworth series, the reliability-based design theory, and the sensitivity analysis approach were employed directly to calculate the reliability-based sensitivity of mechanical components on the condition that the first four moments of the original random variables are known. The reliability-based sensitivity information of the mechanical components can be accurately and quickly obtained using a practical computer program. The effects of the design parameters on the reliability of mechanical components were studied. The method presented in this paper provides the theoretic basis for the reliability-based design of mechanical components

  14. Real Time Engineering Analysis Based on a Generative Component Implementation

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Klitgaard, Jens

    2007-01-01

    The present paper outlines the idea of a conceptual design tool with real time engineering analysis which can be used in the early conceptual design phase. The tool is based on a parametric approach using Generative Components with embedded structural analysis. Each of these components uses the g...

  15. Component Composability Issues in Object-Oriented Programming

    NARCIS (Netherlands)

    Aksit, Mehmet; Tekinerdogan, B.

    1997-01-01

    Building software from reusable components is considered important in reducing development costs. Object-oriented languages such as C++, Smalltalk and Java, however, are not capable of expressing certain aspects of applications in a composable way. Software engineers may experience difficulties in

  16. Algorithmic fault tree construction by component-based system modeling

    International Nuclear Information System (INIS)

    Majdara, Aref; Wakabayashi, Toshio

    2008-01-01

    Computer-aided fault tree generation can be easier, faster and less vulnerable to errors than the conventional manual fault tree construction. In this paper, a new approach for algorithmic fault tree generation is presented. The method mainly consists of a component-based system modeling procedure an a trace-back algorithm for fault tree synthesis. Components, as the building blocks of systems, are modeled using function tables and state transition tables. The proposed method can be used for a wide range of systems with various kinds of components, if an inclusive component database is developed. (author)

  17. Verifying Embedded Systems using Component-based Runtime Observers

    DEFF Research Database (Denmark)

    Guan, Wei; Marian, Nicolae; Angelov, Christo K.

    against formally specified properties. This paper presents a component-based design method for runtime observers, which are configured from instances of prefabricated reusable components---Predicate Evaluator (PE) and Temporal Evaluator (TE). The PE computes atomic propositions for the TE; the latter...... is a reconfigurable component processing a data structure, representing the state transition diagram of a non-deterministic state machine, i.e. a Buchi automaton derived from a system property specified in Linear Temporal Logic (LTL). Observer components have been implemented using design models and design patterns...

  18. Essential components of a successful doctoral program in nanomedicine

    Directory of Open Access Journals (Sweden)

    van de Ven AL

    2014-12-01

    Full Text Available Anne L van de Ven,1,2 Mary H Shann,3 Srinivas Sridhar1,2 1Nanomedicine Science and Technology Center, 2Department of Physics, Northeastern University, Boston, MA, USA; 3School of Education, Boston University, Boston, MA, USAAbstract: The Nanomedicine program at Northeastern University provides a unique interdisciplinary graduate education that combines experiential research, didactic learning, networking, and outreach. Students are taught how to apply nanoscience and nanotechnology to problems in medicine, translate basic research to the development of marketable products, negotiate ethical and social issues related to nanomedicine, and develop a strong sense of community involvement within a global perspective. Since 2006, the program has recruited 50 doctoral students from ten traditional science, technology, and engineering disciplines to participate in the 2-year specialization program. Each trainee received mentoring from two or more individuals, including faculty members outside the student’s home department and faculty members at other academic institutions, and/or clinicians. Both students and faculty members reported a significant increase in interdisciplinary scholarly activities, including publications, presentations, and funded research proposals, as a direct result of the program. Nearly 90% of students graduating with a specialization in nanomedicine have continued on to careers in the health care sector. Currently, 43% of graduates are performing research or developing products that directly involve nanomedicine. This article identifies some key elements of the Nanomedicine program, describes how they were implemented, and reports on the metrics of success.Keywords: nanomedicine, IGERT, nanotechnology, nanoscience, education, graduate training

  19. Essential components of a successful doctoral program in nanomedicine.

    Science.gov (United States)

    van de Ven, Anne L; Shann, Mary H; Sridhar, Srinivas

    2015-01-01

    The Nanomedicine program at Northeastern University provides a unique interdisciplinary graduate education that combines experiential research, didactic learning, networking, and outreach. Students are taught how to apply nanoscience and nanotechnology to problems in medicine, translate basic research to the development of marketable products, negotiate ethical and social issues related to nanomedicine, and develop a strong sense of community involvement within a global perspective. Since 2006, the program has recruited 50 doctoral students from ten traditional science, technology, and engineering disciplines to participate in the 2-year specialization program. Each trainee received mentoring from two or more individuals, including faculty members outside the student's home department and faculty members at other academic institutions, and/or clinicians. Both students and faculty members reported a significant increase in interdisciplinary scholarly activities, including publications, presentations, and funded research proposals, as a direct result of the program. Nearly 90% of students graduating with a specialization in nanomedicine have continued on to careers in the health care sector. Currently, 43% of graduates are performing research or developing products that directly involve nanomedicine. This article identifies some key elements of the Nanomedicine program, describes how they were implemented, and reports on the metrics of success.

  20. [Intervention programs in hospital nutrition: actions, design, components and implementation].

    Science.gov (United States)

    Santana Porben, S; Barreto Penié, J

    2005-01-01

    Metabolic, Nutrient and Feeding Intervention Programs must become the methodological tool for dealing with the health problem posed by disease-associated-malnutrition on one side, and the "Bad Practices" affecting the nutritional status of the patient, on the other one. Programs like these ones should prescribe clear policies and actions in the three domains of contemporary medical practice: assistance, research and education. The fullfillment of these Program's objectives, and the relization of the implicit benefits, will only be possible if a methodological platform that armonically integrates elements of Continuous Education, Cost Analysis, Recording and Documentation, and Quality Control and Assurance, is created. The experience acumulated after the inception and conduction of the Intervention Program at the Clinical-Surgical "Hermanos Ameijeiras" Hospital (Havana City, Cuba) has served to demostrate that it is feasible not only to create a theoretical and practical body to satisfy the aforementioned goals, but, also, to export it to another institutions of the country, in view of the fact that minimal investments for adquiring the resources needed to deploy such Program, as well as for training and capacitation of medic and paramedic personel in the corresponding Recording & Documentation and Feeding & Nutrition Good Practices might result in short-term economical and medical care benefits.

  1. Generic aging management programs for license renewal of BWR reactor coolant systems components

    International Nuclear Information System (INIS)

    Shah, V.N.; Liu, Y.Y.

    2002-01-01

    The paper reviews the existing generic aging management programs (AMPs) for the reactor coolant system (RCS) components in boiling water reactors (BWRs), including the reactor pressure vessel and internals, the reactor recirculation system, and the connected piping. These programs have been evaluated in the U.S. Nuclear Regulatory Commission (NRC) report, Generic Aging Lessons Learned (GALL), NUREG-1801, for their use in the license renewal process to manage several aging effects, including loss of material, crack initiation and growth, loss of fracture toughness, loss of preload, wall thinning, and cumulative fatigue damage. The program evaluation includes a review of ten attributes (scope of program, preventive actions, parameters monitored/inspected, detection of aging effects, monitoring and trending, acceptance criteria, corrective actions, confirmative process, administrative control, and operating experience) for their effectiveness in managing a specific aging effect in a given component(s). The generic programs are based on the ASME Section XI inservice inspection requirements; industry guidelines for inspection and evaluation of aging effects in BWR reactor vessel, internals, and recirculation piping; monitoring and control of BWR water chemistry; and operating experience as reported in the USNRC generic communications and industry reports. The review concludes that all generic AMPs are acceptable for managing aging effects in BWR RCS components during an extended period of operation and do not need further evaluation. However, the plant-specific programs for managing aging in certain RCS components during an extended period of operation do require further evaluation. For some plant-specific AMPs, the GALL report recommends an aging management activity to verify their effectiveness. An example of such an activity is a one-time inspection of Class 1 small-bore piping to ensure that service-induced weld cracking is not occurring in the piping. Several of

  2. Generic Aging Management Programs for License Renewal of BWR Reactor Coolant System Components

    International Nuclear Information System (INIS)

    Shah, V.N.; Liu, Y.Y.

    2002-01-01

    The paper reviews the existing generic aging management programs (AMPs) for the reactor coolant system (RCS) components in boiling water reactors (BWRs), including the reactor pressure vessel and internals, the reactor recirculation system, and the connected piping. These programs have been evaluated in the U.S. Nuclear Regulatory Commission (NRC) report, Generic Aging Lessons Learned (GALL), NUREG-1801, for their use in the license renewal process to manage several aging effects, including loss of material, crack initiation and growth, loss of fracture toughness, loss of preload, wall thinning, and cumulative fatigue damage. The program evaluation includes a review of ten attributes (scope of program, preventive actions, parameters monitored/inspected, detection of aging effects, monitoring and trending, acceptance criteria, corrective actions, confirmative process, administrative control, and operating experience) for their effectiveness in managing a specific aging effect in a given component(s). The generic programs are based on the ASME Section XI inservice inspection requirements; industry guidelines for inspection and evaluation of aging effects in BWR reactor vessel, internals, and recirculation piping; monitoring and control of BWR water chemistry; and operating experience as reported in the USNRC generic communications and industry reports. The review concludes that all generic AMPs are acceptable for managing aging effects in BWR RCS components during an extended period of operation and do not need further evaluation. However, the plant-specific programs for managing aging in certain RCS components during an extended period of operation do require further evaluation. For some plant-specific AMPs, the GALL report recommends an aging management activity to verify their effectiveness. An example of such an activity is a one-time inspection of Class 1 small-bore piping to ensure that service-induced weld cracking is not occurring in the piping. Several of

  3. Flexible optical network components based on densely integrated microring resonators

    NARCIS (Netherlands)

    Geuzebroek, D.H.

    2005-01-01

    This thesis addresses the design, realization and characterization of reconfigurable optical network components based on multiple microring resonators. Since thermally tunable microring resonators can be used as wavelength selective space switches, very compact devices with high complexity and

  4. Component-Based Software Engineering and Runtime Type Definition

    OpenAIRE

    A. R. Shakurov

    2011-01-01

    The component-based approach to software engineering, its current implementations and their limitations are discussed. A new extended architecture for such systems is presented. Its main architectural concepts and principles are considered.

  5. Imprecise system reliability and component importance based on survival signature

    International Nuclear Information System (INIS)

    Feng, Geng; Patelli, Edoardo; Beer, Michael; Coolen, Frank P.A.

    2016-01-01

    The concept of the survival signature has recently attracted increasing attention for performing reliability analysis on systems with multiple types of components. It opens a new pathway for a structured approach with high computational efficiency based on a complete probabilistic description of the system. In practical applications, however, some of the parameters of the system might not be defined completely due to limited data, which implies the need to take imprecisions of component specifications into account. This paper presents a methodology to include explicitly the imprecision, which leads to upper and lower bounds of the survival function of the system. In addition, the approach introduces novel and efficient component importance measures. By implementing relative importance index of each component without or with imprecision, the most critical component in the system can be identified depending on the service time of the system. Simulation method based on survival signature is introduced to deal with imprecision within components, which is precise and efficient. Numerical example is presented to show the applicability of the approach for systems. - Highlights: • Survival signature is a novel way for system reliability and component importance • High computational efficiency based on a complete description of system. • Include explicitly the imprecision, which leads to bounds of the survival function. • A novel relative importance index is proposed as importance measure. • Allows to identify critical components depending on the service time of the system.

  6. Parallel PDE-Based Simulations Using the Common Component Architecture

    International Nuclear Information System (INIS)

    McInnes, Lois C.; Allan, Benjamin A.; Armstrong, Robert; Benson, Steven J.; Bernholdt, David E.; Dahlgren, Tamara L.; Diachin, Lori; Krishnan, Manoj Kumar; Kohl, James A.; Larson, J. Walter; Lefantzi, Sophia; Nieplocha, Jarek; Norris, Boyana; Parker, Steven G.; Ray, Jaideep; Zhou, Shujia

    2006-01-01

    The complexity of parallel PDE-based simulations continues to increase as multimodel, multiphysics, and multi-institutional projects become widespread. A goal of component based software engineering in such large-scale simulations is to help manage this complexity by enabling better interoperability among various codes that have been independently developed by different groups. The Common Component Architecture (CCA) Forum is defining a component architecture specification to address the challenges of high-performance scientific computing. In addition, several execution frameworks, supporting infrastructure, and general purpose components are being developed. Furthermore, this group is collaborating with others in the high-performance computing community to design suites of domain-specific component interface specifications and underlying implementations. This chapter discusses recent work on leveraging these CCA efforts in parallel PDE-based simulations involving accelerator design, climate modeling, combustion, and accidental fires and explosions. We explain how component technology helps to address the different challenges posed by each of these applications, and we highlight how component interfaces built on existing parallel toolkits facilitate the reuse of software for parallel mesh manipulation, discretization, linear algebra, integration, optimization, and parallel data redistribution. We also present performance data to demonstrate the suitability of this approach, and we discuss strategies for applying component technologies to both new and existing applications

  7. Cloud Based Big Data Infrastructure: Architectural Components and Automated Provisioning

    OpenAIRE

    Demchenko, Yuri; Turkmen, Fatih; Blanchet, Christophe; Loomis, Charles; Laat, Caees de

    2016-01-01

    This paper describes the general architecture and functional components of the cloud based Big Data Infrastructure (BDI). The proposed BDI architecture is based on the analysis of the emerging Big Data and data intensive technologies and supported by the definition of the Big Data Architecture Framework (BDAF) that defines the following components of the Big Data technologies: Big Data definition, Data Management including data lifecycle and data structures, Big Data Infrastructure (generical...

  8. Focus on Student Success: Components for Effective Summer Bridge Programs

    Science.gov (United States)

    Gonzalez Quiroz, Alicia; Garza, Nora R.

    2018-01-01

    Using research focused on best practices, focus group information, and data analytics, the Title V: Focus on Student Success (FOSS) Grant created a model for the development, implementation, and evaluation of a summer bridge program. Results included increased academic performance indicators in first-year Hispanic college students. Validation for…

  9. 36 CFR 72.11 - Action program components.

    Science.gov (United States)

    2010-07-01

    ... of the Action Program will be placed on the rehabilitation of deteriorating facilities, it also will describe how the rehabilitation effort is linked to the overall goals, priorities and strategies of the... linked to the objectives, needs, plans, and institutional arrangements of the community. The Action...

  10. Formative Evaluation of the Behavior Change Components within a Colorado Weatherization Assistance Program

    Science.gov (United States)

    Sandoval, Perla K.

    A formative evaluation of behavior change elements of an ongoing Weatherization Assistance Program (WAP) offered by the Energy Resource Center (E.R.C.) in Denver, CO was conducted. The WAP as administered by the E.R.C. in Colorado saves residents an average 15% of energy consumption (E.R.C., 2015). However, research suggests that adding behavioral components to WAPs could increase energy savings to 21-26% (Gregory, 1992; APPRAISE, 2002). The goal of this evaluation is to provide recommendations to E.R.C. for program changes using Community Based Social Marketing (CBSM) and Theory of Planned Behavior. The CBSM Step 1- Step 3 is the focus of this formative evaluation. This program evaluation has four components: 1) review of written materials, 2) interviews with staff, 3) surveys mailed to E.R.C. clients and 4) in-home observations conducted with E.R.C. clients. Results of this formative evaluation has 3 sections of behaviors recommended for future intervention high priority, mid priority, and low priority recommendations based on CBSM penetration, probability, and impact factors. Behaviors that are listed as high priority for E.R.C. Behavioral intervention are cold water washing, hang drying, setting back thermostats, and window coverings. Overall increase in staff engagement is also recommended to be pursued. Each staff level is also given recommendations on how to engage in behavior change interventions.

  11. Research program Integrity of Components (FKS). A substantial contribution to component safety

    International Nuclear Information System (INIS)

    Kussmaul, K.; Roos, E.; Foehl, J.

    1998-01-01

    The main objectives pursued are: (a) verify the quality of reactor pressure vessels in existing LWR-type reactors, and (b) quantify the safety margin using both specified and non-specified materials and welds. On the basis of knowledge obtained through earlier programmes, the research project was to examine in particular deviations from the specified materials properties, for more exact quantification of the safety margin before RPV failure. There are three major factors influencing the component performance until failure, which are aggregate material fatigue, flaws, loading conditions, and the research work was to focus on the materials properties. An item of main interest was to assess the impact of long service life on the materials properties, assuming particularly unfavourable boundary conditions for materials properties and operational loads. (orig./CB) [de

  12. Recommendations for strengthening the infrared technology component of any condition monitoring program

    Science.gov (United States)

    Nicholas, Jack R., Jr.; Young, R. K.

    1999-03-01

    This presentation provides insights of a long term 'champion' of many condition monitoring technologies and a Level III infra red thermographer. The co-authors present recommendations based on their observations of infra red and other components of predictive, condition monitoring programs in manufacturing, utility and government defense and energy activities. As predictive maintenance service providers, trainers, informal observers and formal auditors of such programs, the co-authors provide a unique perspective that can be useful to practitioners, managers and customers of advanced programs. Each has over 30 years experience in the field of machinery operation, maintenance, and support the origins of which can be traced to and through the demanding requirements of the U.S. Navy nuclear submarine forces. They have over 10 years each of experience with programs in many different countries on 3 continents. Recommendations are provided on the following: (1) Leadership and Management Support (For survival); (2) Life Cycle View (For establishment of a firm and stable foundation for a program); (3) Training and Orientation (For thermographers as well as operators, managers and others); (4) Analyst Flexibility (To innovate, explore and develop their understanding of machinery condition); (5) Reports and Program Justification (For program visibility and continued expansion); (6) Commitment to Continuous Improvement of Capability and Productivity (Through application of updated hardware and software); (7) Mutual Support by Analysts (By those inside and outside of the immediate organization); (8) Use of Multiple Technologies and System Experts to Help Define Problems (Through the use of correlation analysis of data from up to 15 technologies. An example correlation analysis table for AC and DC motors is provided.); (9) Root Cause Analysis (Allows a shift from reactive to proactive stance for a program); (10) Master Equipment Identification and Technology Application (To

  13. Algorithms and programs for evaluating fault trees with multi-state components

    International Nuclear Information System (INIS)

    Wickenhaeuser, A.

    1989-07-01

    Part 1 and 2 of the report contain a summary overview of methods and algorithms for the solution of fault tree analysis problems. The following points are treated in detail: Treatment of fault tree components with more than two states. Acceleration of the solution algorithms. Decomposition and modularization of extensive systems. Calculation of the structural function and the exact occurrence probability. Treatment of statistical dependencies. A flexible tool to be employed in solving these problems is the method of forming Boolean variables with restrictions. In this way, components with more than two states can be treated, the possibilities of forming modules expanded, and statistical dependencies treated. Part 3 contains descriptions of the MUSTAFA, MUSTAMO, PASPI, and SIMUST computer programs based on these methods. (orig./HP) [de

  14. Isocyanide based multi component reactions in combinatorial chemistry.

    NARCIS (Netherlands)

    Dömling, A.

    1998-01-01

    Although usually regarded as a recent development, the combinatorial approach to the synthesis of libraries of new drug candidates was first described as early as 1961 using the isocyanide-based one-pot multicomponent Ugi reaction. Isocyanide-based multi component reactions (MCR's) markedly differ

  15. Independent component analysis based filtering for penumbral imaging

    International Nuclear Information System (INIS)

    Chen Yenwei; Han Xianhua; Nozaki, Shinya

    2004-01-01

    We propose a filtering based on independent component analysis (ICA) for Poisson noise reduction. In the proposed filtering, the image is first transformed to ICA domain and then the noise components are removed by a soft thresholding (shrinkage). The proposed filter, which is used as a preprocessing of the reconstruction, has been successfully applied to penumbral imaging. Both simulation results and experimental results show that the reconstructed image is dramatically improved in comparison to that without the noise-removing filters

  16. Design of multi-tiered database application based on CORBA component

    International Nuclear Information System (INIS)

    Sun Xiaoying; Dai Zhimin

    2003-01-01

    As computer technology quickly developing, middleware technology changed traditional two-tier database system. The multi-tiered database system, consisting of client application program, application servers and database serves, is mainly applying. While building multi-tiered database system using CORBA component has become the mainstream technique. In this paper, an example of DUV-FEL database system is presented, and then discuss the realization of multi-tiered database based on CORBA component. (authors)

  17. Nuclear component design ontology building based on ASME codes

    International Nuclear Information System (INIS)

    Bao Shiyi; Zhou Yu; He Shuyan

    2005-01-01

    The adoption of ontology analysis in the study of concept knowledge acquisition and representation for the nuclear component design process based on computer-supported cooperative work (CSCW) makes it possible to share and reuse numerous concept knowledge of multi-disciplinary domains. A practical ontology building method is accordingly proposed based on Protege knowledge model in combination with both top-down and bottom-up approaches together with Formal Concept Analysis (FCA). FCA exhibits its advantages in the way it helps establish and improve taxonomic hierarchy of concepts and resolve concept conflict occurred in modeling multi-disciplinary domains. With Protege-3.0 as the ontology building tool, a nuclear component design ontology based ASME codes is developed by utilizing the ontology building method. The ontology serves as the basis to realize concept knowledge sharing and reusing of nuclear component design. (authors)

  18. IAEA's experience in compiling a generic component reliability data base

    International Nuclear Information System (INIS)

    Tomic, B.; Lederman, L.

    1988-01-01

    Reliability data are an essential part of probabilistic safety assessment. The quality of data can determine the quality of the study as a whole. It is obvious that component failure data originated from the plant being analyzed would be most appropriate. However, in few cases complete reliance on plant experience is possible, mainly because of the rather limited operating experience. Nuclear plants, although of different design, often use fairly similar components, so some of the experience could be combined and transferred from one plant to another. In addition information about component failures is available also from experts with knowledge on component design, manufacturing and operation. That bring us to the importance of assessing generic data. (Generic is meant to be everything that is not plant specific regarding the plant being analyzed). The generic data available in the open literature, can be divided in three broad categories. The first one includes data base used in previous analysis. These can be plant specific or updated from generic with plant specific information (latter case deserve special attention). The second one is based on compilation of plants' operating experience usually based on some kind of event reporting system. The third category includes data sources based on expert opinions (single or aggregate) or combination of expert opinions and other nuclear and non-nuclear experience. This paper reflects insights gained in compiling data from generic data sources and highlights advantages and pitfalls of using generic component reliability data in PSAs

  19. Heat source component development program, October 1977--February 1978

    International Nuclear Information System (INIS)

    1978-03-01

    The General Purpose Heat Source (GPHS) is being developed by Los Alamos Scientific Laboratory (LASL) for the Department of Energy (DOE) Division of Nuclear Research and Application (DNRA). The first mission scheduled for the GPHS is the NASA Out-of-Ecliptic Flight in January, 1983. During the current reporting period (October--December, 1977, January--February, 1978), activities in this task were conducted as follows: (1) documentation of results of the reentry thermal, ablation, and thermal stress analyses of the conceptual designs; (2) identification and completion of modifications to the thermal and ablation models used to determine the performance response of the heat source modules during reentry; (3) initiation of modifications to the thermal stress model used to determine the performance response of heat source modules during reentry; (4) completion and documentation of the surface chemistry experiments; (5) initiation and completion of activities in support of LASL to define test plans for the trial design phase of the GPHS development program; (6) participation in the GPHS design review meeting held at DOE/Germantown, Maryland, December 19--20, 1977; and (7) initiation of the thermal analysis of Trial Design 1.1

  20. Type systems for distributed programs components and sessions

    CERN Document Server

    Dardha, Ornela

    2016-01-01

    In this book we develop powerful techniques based on formal methods for the verification of correctness, consistency and safety properties related to dynamic reconfiguration and communication in complex distributed systems. In particular, static analysis techniques based on types and type systems are an adequate methodology considering their success in guaranteeing not only basic safety properties, but also more sophisticated ones like deadlock or lock freedom in concurrent settings. The main contributions of this book are twofold. i) We design a type system for a concurrent object-oriented calculus to statically ensure consistency of dynamic reconfigurations. ii) We define an encoding of the session pi-calculus, which models communication in distributed systems, into the standard typed pi-calculus. We use this encoding to derive properties like type safety and progress in the session pi-calculus by exploiting the corresponding properties in the standard typed pi-calculus.

  1. Towards a Component Based Model for Database Systems

    Directory of Open Access Journals (Sweden)

    Octavian Paul ROTARU

    2004-02-01

    Full Text Available Due to their effectiveness in the design and development of software applications and due to their recognized advantages in terms of reusability, Component-Based Software Engineering (CBSE concepts have been arousing a great deal of interest in recent years. This paper presents and extends a component-based approach to object-oriented database systems (OODB introduced by us in [1] and [2]. Components are proposed as a new abstraction level for database system, logical partitions of the schema. In this context, the scope is introduced as an escalated property for transactions. Components are studied from the integrity, consistency, and concurrency control perspective. The main benefits of our proposed component model for OODB are the reusability of the database design, including the access statistics required for a proper query optimization, and a smooth information exchange. The integration of crosscutting concerns into the component database model using aspect-oriented techniques is also discussed. One of the main goals is to define a method for the assessment of component composition capabilities. These capabilities are restricted by the component’s interface and measured in terms of adaptability, degree of compose-ability and acceptability level. The above-mentioned metrics are extended from database components to generic software components. This paper extends and consolidates into one common view the ideas previously presented by us in [1, 2, 3].[1] Octavian Paul Rotaru, Marian Dobre, Component Aspects in Object Oriented Databases, Proceedings of the International Conference on Software Engineering Research and Practice (SERP’04, Volume II, ISBN 1-932415-29-7, pages 719-725, Las Vegas, NV, USA, June 2004.[2] Octavian Paul Rotaru, Marian Dobre, Mircea Petrescu, Integrity and Consistency Aspects in Component-Oriented Databases, Proceedings of the International Symposium on Innovation in Information and Communication Technology (ISIICT

  2. Component based modelling of piezoelectric ultrasonic actuators for machining applications

    International Nuclear Information System (INIS)

    Saleem, A; Ahmed, N; Salah, M; Silberschmidt, V V

    2013-01-01

    Ultrasonically Assisted Machining (UAM) is an emerging technology that has been utilized to improve the surface finishing in machining processes such as turning, milling, and drilling. In this context, piezoelectric ultrasonic transducers are being used to vibrate the cutting tip while machining at predetermined amplitude and frequency. However, modelling and simulation of these transducers is a tedious and difficult task. This is due to the inherent nonlinearities associated with smart materials. Therefore, this paper presents a component-based model of ultrasonic transducers that mimics the nonlinear behaviour of such a system. The system is decomposed into components, a mathematical model of each component is created, and the whole system model is accomplished by aggregating the basic components' model. System parameters are identified using Finite Element technique which then has been used to simulate the system in Matlab/SIMULINK. Various operation conditions are tested and performed to demonstrate the system performance

  3. Context sensitivity and ambiguity in component-based systems design

    Energy Technology Data Exchange (ETDEWEB)

    Bespalko, S.J.; Sindt, A.

    1997-10-01

    Designers of components-based, real-time systems need to guarantee to correctness of soft-ware and its output. Complexity of a system, and thus the propensity for error, is best characterized by the number of states a component can encounter. In many cases, large numbers of states arise where the processing is highly dependent on context. In these cases, states are often missed, leading to errors. The following are proposals for compactly specifying system states which allow the factoring of complex components into a control module and a semantic processing module. Further, the need for methods that allow for the explicit representation of ambiguity and uncertainty in the design of components is discussed. Presented herein are examples of real-world problems which are highly context-sensitive or are inherently ambiguous.

  4. Arthropod Surveillance Programs: Basic Components, Strategies, and Analysis

    Science.gov (United States)

    2012-01-01

    CA. 9 NAMRU-3, US Navy, Cairo, Egypt . inferences from trap capture data. The following is a review of the three arthropod surveillance compo- nents...by thigmotaxis. Fig. 1. The two traps used for stored product insects, A) the commonly used Dome trap (Trècè) and B) the newly developed pyramid ...trap. The pyramid trap is made up of two elements: a cover (1) and a base (2) with a center pitfall (3). (Online Þgure in color.) 140 ANNALS OF THE

  5. Effectiveness of a 16-month multi-component and environmental school-based intervention for recovery of poor income overweight/obese children and adolescents: study protocol of the health multipliers program

    Directory of Open Access Journals (Sweden)

    Pollyanna Fernandes Patriota

    2017-09-01

    Full Text Available Abstract Background Excess of weight is a serious public health concern in almost all countries, afflicting people of different ages and socioeconomic backgrounds. Studies have indicated the need for developing treatment strategies that intervene directly in the obesogenic environment. This study aims to evaluate the effectiveness of a multi-component and environmental school-based intervention, lasting 16 months, on the recovery of the nutritional status of low-income children and adolescents with overweight/ obesity. Methods/study design The study was conducted by the Center for Recovery and Nutritional Education (CREN in São Paulo, Brazil. Two schools located in poor neighborhoods were selected for the intervention, between March 2016 and June 2017. The participants were all students aged 8 to 12 years from the two participating schools. At the beginning of the intervention, anthropometric measurements were carried out to assess the nutritional status of the students. For convenience, students from one of the schools were considered as the control group, while those from the other school formed the experimental group. The intervention in the experimental group (n = 438 consists of the following weekly activities at school: psychological counseling in groups, theoretical/practical nutrition workshops, and supervised physical education classes. In addition, theoretical and practical educational activities are held regularly for parents, teachers, and cooks. Students with excess of weight (≥1 body mass index [BMI] –for-age Z score, n = 138 received clinical and nutritional care periodically at the outpatient care at CREN. Students enrolled in the control group (n = 353 participated in psychological counseling groups and theoretical/practical nutrition workshops for 6 months held in the school environment to provide motivation to entire classrooms. In the following 10 months, students with excess of weight from the control group (n

  6. Effectiveness of a 16-month multi-component and environmental school-based intervention for recovery of poor income overweight/obese children and adolescents: study protocol of the health multipliers program.

    Science.gov (United States)

    Patriota, Pollyanna Fernandes; Filgueiras, Andrea Rocha; de Almeida, Viviane Belucci Pires; Alexmovitz, Guilherme Aparecido Costa; da Silva, Carlos Eduardo; de Carvalho, Vivian Fortuna Feres; Carvalho, Natália; de Albuquerque, Maria Paula; Domene, Semiramis Martins Alvares; do Prado, Wagner Luiz; Torres, Gustavo Enrique Salazar; de Oliveira, Ana Paula Reis; Sesso, Ricardo; Sawaya, Ana Lydia

    2017-09-15

    Excess of weight is a serious public health concern in almost all countries, afflicting people of different ages and socioeconomic backgrounds. Studies have indicated the need for developing treatment strategies that intervene directly in the obesogenic environment. This study aims to evaluate the effectiveness of a multi-component and environmental school-based intervention, lasting 16 months, on the recovery of the nutritional status of low-income children and adolescents with overweight/ obesity. The study was conducted by the Center for Recovery and Nutritional Education (CREN) in São Paulo, Brazil. Two schools located in poor neighborhoods were selected for the intervention, between March 2016 and June 2017. The participants were all students aged 8 to 12 years from the two participating schools. At the beginning of the intervention, anthropometric measurements were carried out to assess the nutritional status of the students. For convenience, students from one of the schools were considered as the control group, while those from the other school formed the experimental group. The intervention in the experimental group (n = 438) consists of the following weekly activities at school: psychological counseling in groups, theoretical/practical nutrition workshops, and supervised physical education classes. In addition, theoretical and practical educational activities are held regularly for parents, teachers, and cooks. Students with excess of weight (≥1 body mass index [BMI] -for-age Z score, n = 138) received clinical and nutritional care periodically at the outpatient care at CREN. Students enrolled in the control group (n = 353) participated in psychological counseling groups and theoretical/practical nutrition workshops for 6 months held in the school environment to provide motivation to entire classrooms. In the following 10 months, students with excess of weight from the control group (n = 125) were invited to attend the routine outpatient

  7. Clean Diesel Engine Component Improvement Program Diesel Truck Thermoelectric Generator

    Energy Technology Data Exchange (ETDEWEB)

    Elsner, N. B. [Hi-Z Technology, Inc., San Diego, CA (United States); Bass, J. C. [Hi-Z Technology, Inc., San Diego, CA (United States); Ghamaty, S. [Hi-Z Technology, Inc., San Diego, CA (United States); Krommenhoek, D. [Hi-Z Technology, Inc., San Diego, CA (United States); Kushch, A. [Hi-Z Technology, Inc., San Diego, CA (United States); Snowden, D. [Hi-Z Technology, Inc., San Diego, CA (United States); Marchetti, S. [Hi-Z Technology, Inc., San Diego, CA (United States)

    2005-03-16

    Hi-Z Technology, Inc. (Hi-Z) is currently developing four different auxiliary generator designs that are used to convert a portion (5 to 20%) of the waste heat from vehicle engines exhaust directly to electricity. The four designs range from 200 Watts to 10 kW. The furthest along is the 1 kW Diesel Truck Thermoelectric Generator (DTTEG) for heavy duty Class 8 Diesel trucks, which, under this program, has been subjected to 543,000 equivalent miles of bouncing and jarring on PACCAR's test track. Test experience on an earlier version of the DTTEG on the same track showed the need for design modifications incorporated in DTTEG Mod 2, such as a heavy duty shock mounting system and reinforcement of the electrical leads mounting system, the thermocouple mounting system and the thermoelectric module restraints. The conclusion of the 543,000 mile test also pointed the way for an upgrading to heavy duty hose or flex connections for the internal coolant connections for the TEG, and consideration of a separate lower temperature cooling loop with its own radiator. Fuel savings of up to $750 per year and a three to five year payback are believed to be possible with the 5 % efficiency modules. The economics are expected to improve considerably to approach a two year payback when the 5 kW to 10 kW generators make it to the market in a few years with a higher efficiency (20%) thermoelectric module system called Quantum Wells, which are currently under development by Hi-Z. Ultimately, as automation takes over to reduce material and labor costs in the high volume production of QW modules, a one year payback for the 5 kW to10 kW generator appears possible. This was one of the stated goals at the beginning of the project. At some future point in time, with the DTTEG becoming standard equipment on all trucks and automobiles, fuel savings from the 25% conversion of exhaust heat to useable electricity nationwide equates to a 10% reduction in the 12 to 15 million barrels per day of

  8. Reduction of uncertainties on the components of the reactivity loss per cycle, the Balzac program on Masurca

    International Nuclear Information System (INIS)

    D'Angelo, A.; Karouby-Cohen, N.; Palmiotti, G.; Rimpault, G.; Salvatores, M.; Soule, R.

    1984-10-01

    The uncertainties on the reactivity loss per cycle are mainly due to the uncertainties on the heavy isotopes component. This paper, presents an experimental program for reducing these uncertainties. This program is based on a range of fuel irradiation experiments on power reactor and a range of isotopic variations experiments in the critical facility MASURCA consisting basically of subcritical measurements, from a reference configuration and in several different spectra

  9. Development of geophysical and geochemical data processing software based on component GIS

    International Nuclear Information System (INIS)

    Ke Dan; Yu Xiang; Wu Qubo; Han Shaoyang; Li Xi

    2013-01-01

    Based on component GIS and mixed programming techniques, a software which combines the basic GIS functions, conventional and unconventional data process methods for the regional geophysical and geochemical data together, is designed and developed. The software has many advantages, such as friendly interface, easy to use and utility functions and provides a useful platform for regional geophysical and geochemical data processing. (authors)

  10. Components of effective randomized controlled trials of hydrotherapy programs for fibromyalgia syndrome: A systematic review

    Directory of Open Access Journals (Sweden)

    Luke Perraton

    2009-11-01

    Full Text Available Luke Perraton, Zuzana Machotka, Saravana KumarInternational Centre for Allied Health Evidence, University of South Australia, Adelaide, South Australia, AustraliaAim: Previous systematic reviews have found hydrotherapy to be an effective management strategy for fibromyalgia syndrome (FMS. The aim of this systematic review was to summarize the components of hydrotherapy programs used in randomized controlled trials.Method: A systematic review of randomized controlled trials was conducted. Only trials that have reported significant FMS-related outcomes were included. Data relating to the components of hydrotherapy programs (exercise type, duration, frequency and intensity, environmental factors, and service delivery were analyzed.Results: Eleven randomized controlled trials were included in this review. Overall, the quality of trials was good. Aerobic exercise featured in all 11 trials and the majority of hydrotherapy programs included either a strengthening or flexibility component. Great variability was noted in both the environmental components of hydrotherapy programs and service delivery.Conclusions: Aerobic exercise, warm up and cool-down periods and relaxation exercises are common features of hydrotherapy programs that report significant FMS-related outcomes. Treatment duration of 60 minutes, frequency of three sessions per week and an intensity equivalent to 60%–80% maximum heart rate were the most commonly reported exercise components. Exercise appears to be the most important component of an effective hydrotherapy program for FMS, particularly when considering mental health-related outcomes.Keywords: hydrotherapy, fibromyalgia syndrome, exercise, effective, components

  11. MENO-II: An AI-Based Programming Tutor.

    Science.gov (United States)

    Soloway, Elliot; And Others

    This report examines the features and performance of the BUG-FINDing component of MENO-II, a computer-based tutor for beginning PASCAL programming students. A discussion of the use of artificial intelligence techniques is followed by a summary of the system status and objectives. The two main components of MENO-II are described, beginning with the…

  12. Management of Globally Distributed Component-Based Software Development Projects

    NARCIS (Netherlands)

    J. Kotlarsky (Julia)

    2005-01-01

    textabstractGlobally Distributed Component-Based Development (GD CBD) is expected to become a promising area, as increasing numbers of companies are setting up software development in a globally distributed environment and at the same time are adopting CBD methodologies. Being an emerging area, the

  13. Monitoring extensions for component-based distributed software

    NARCIS (Netherlands)

    Diakov, N.K.; Papir, Z.; van Sinderen, Marten J.; Quartel, Dick

    2000-01-01

    This paper defines a generic class of monitoring extensions to component-based distributed enterprise software. Introducing a monitoring extension to a legacy application system can be very costly. In this paper, we identify the minimum support for application monitoring within the generic

  14. Integration of Simulink Models with Component-based Software Models

    DEFF Research Database (Denmark)

    Marian, Nicolae

    2008-01-01

    Model based development aims to facilitate the development of embedded control systems by emphasizing the separation of the design level from the implementation level. Model based design involves the use of multiple models that represent different views of a system, having different semantics...... of abstract system descriptions. Usually, in mechatronics systems, design proceeds by iterating model construction, model analysis, and model transformation. Constructing a MATLAB/Simulink model, a plant and controller behavior is simulated using graphical blocks to represent mathematical and logical...... constraints. COMDES (Component-based Design of Software for Distributed Embedded Systems) is such a component-based system framework developed by the software engineering group of Mads Clausen Institute for Product Innovation (MCI), University of Southern Denmark. Once specified, the software model has...

  15. Feature-based component model for design of embedded systems

    Science.gov (United States)

    Zha, Xuan Fang; Sriram, Ram D.

    2004-11-01

    An embedded system is a hybrid of hardware and software, which combines software's flexibility and hardware real-time performance. Embedded systems can be considered as assemblies of hardware and software components. An Open Embedded System Model (OESM) is currently being developed at NIST to provide a standard representation and exchange protocol for embedded systems and system-level design, simulation, and testing information. This paper proposes an approach to representing an embedded system feature-based model in OESM, i.e., Open Embedded System Feature Model (OESFM), addressing models of embedded system artifacts, embedded system components, embedded system features, and embedded system configuration/assembly. The approach provides an object-oriented UML (Unified Modeling Language) representation for the embedded system feature model and defines an extension to the NIST Core Product Model. The model provides a feature-based component framework allowing the designer to develop a virtual embedded system prototype through assembling virtual components. The framework not only provides a formal precise model of the embedded system prototype but also offers the possibility of designing variation of prototypes whose members are derived by changing certain virtual components with different features. A case study example is discussed to illustrate the embedded system model.

  16. Nuclear Power Reactor simulator - based training program

    International Nuclear Information System (INIS)

    Abdelwahab, S.A.S.

    2009-01-01

    nuclear power stations will continue playing a major role as an energy source for electric generation and heat production in the world. in this paper, a nuclear power reactor simulator- based training program will be presented . this program is designed to aid in training of the reactor operators about the principles of operation of the plant. also it could help the researchers and the designers to analyze and to estimate the performance of the nuclear reactors and facilitate further studies for selection of the proper controller and its optimization process as it is difficult and time consuming to do all experiments in the real nuclear environment.this program is written in MATLAB code as MATLAB software provides sophisticated tools comparable to those in other software such as visual basic for the creation of graphical user interface (GUI). moreover MATLAB is available for all major operating systems. the used SIMULINK reactor model for the nuclear reactor can be used to model different types by adopting appropriate parameters. the model of each component of the reactor is based on physical laws rather than the use of look up tables or curve fitting.this simulation based training program will improve acquisition and retention knowledge also trainee will learn faster and will have better attitude

  17. The effects of exercise program on burnout and metabolic syndrome components in banking and insurance workers.

    Science.gov (United States)

    Tsai, Han Hui; Yeh, Ching Ying; Su, Chien Tien; Chen, Chiou Jong; Peng, Shu Mei; Chen, Ruey Yu

    2013-01-01

    To explore the effectiveness of exercise program for banking and insurance workers and clarify the association between exercise, burnout, and metabolic syndrome components. In the process of the study, a practicable worksite exercise program was developed for bank and insurance enterprises. A three-month (12-wk) exercise course was conducted, and its benefits evaluated. Levels of burnout and metabolic syndrome components were analyzed after exercise intervention. After intervention, the indicators of burnout and metabolic syndrome components were significantly improved in both low and high intensity groups, and the improvement were expressed in reduction of waist circumference, systolic blood pressure, person burnout and work-related burnout. A dose-response of burnouts and metabolic syndrome components with exercise intensity are shown (psyndrome components were independently associated with burnout and exercise intensity in the crude model. After adjustment for potential confounders, waist circumference and systolic blood pressure differences showed significant associations with exercise intensity (pburnouts and metabolic syndrome components.

  18. Components of effective randomized controlled trials of hydrotherapy programs for fibromyalgia syndrome: A systematic review.

    Science.gov (United States)

    Perraton, Luke; Machotka, Zuzana; Kumar, Saravana

    2009-11-30

    Previous systematic reviews have found hydrotherapy to be an effective management strategy for fibromyalgia syndrome (FMS). The aim of this systematic review was to summarize the components of hydrotherapy programs used in randomized controlled trials. A systematic review of randomized controlled trials was conducted. Only trials that have reported significant FMS-related outcomes were included. Data relating to the components of hydrotherapy programs (exercise type, duration, frequency and intensity, environmental factors, and service delivery) were analyzed. Eleven randomized controlled trials were included in this review. Overall, the quality of trials was good. Aerobic exercise featured in all 11 trials and the majority of hydrotherapy programs included either a strengthening or flexibility component. Great variability was noted in both the environmental components of hydrotherapy programs and service delivery. Aerobic exercise, warm up and cool-down periods and relaxation exercises are common features of hydrotherapy programs that report significant FMS-related outcomes. Treatment duration of 60 minutes, frequency of three sessions per week and an intensity equivalent to 60%-80% maximum heart rate were the most commonly reported exercise components. Exercise appears to be the most important component of an effective hydrotherapy program for FMS, particularly when considering mental health-related outcomes.

  19. Component-based software for high-performance scientific computing

    Energy Technology Data Exchange (ETDEWEB)

    Alexeev, Yuri; Allan, Benjamin A; Armstrong, Robert C; Bernholdt, David E; Dahlgren, Tamara L; Gannon, Dennis; Janssen, Curtis L; Kenny, Joseph P; Krishnan, Manojkumar; Kohl, James A; Kumfert, Gary; McInnes, Lois Curfman; Nieplocha, Jarek; Parker, Steven G; Rasmussen, Craig; Windus, Theresa L

    2005-01-01

    Recent advances in both computational hardware and multidisciplinary science have given rise to an unprecedented level of complexity in scientific simulation software. This paper describes an ongoing grass roots effort aimed at addressing complexity in high-performance computing through the use of Component-Based Software Engineering (CBSE). Highlights of the benefits and accomplishments of the Common Component Architecture (CCA) Forum and SciDAC ISIC are given, followed by an illustrative example of how the CCA has been applied to drive scientific discovery in quantum chemistry. Thrusts for future research are also described briefly.

  20. Component-based software for high-performance scientific computing

    International Nuclear Information System (INIS)

    Alexeev, Yuri; Allan, Benjamin A; Armstrong, Robert C; Bernholdt, David E; Dahlgren, Tamara L; Gannon, Dennis; Janssen, Curtis L; Kenny, Joseph P; Krishnan, Manojkumar; Kohl, James A; Kumfert, Gary; McInnes, Lois Curfman; Nieplocha, Jarek; Parker, Steven G; Rasmussen, Craig; Windus, Theresa L

    2005-01-01

    Recent advances in both computational hardware and multidisciplinary science have given rise to an unprecedented level of complexity in scientific simulation software. This paper describes an ongoing grass roots effort aimed at addressing complexity in high-performance computing through the use of Component-Based Software Engineering (CBSE). Highlights of the benefits and accomplishments of the Common Component Architecture (CCA) Forum and SciDAC ISIC are given, followed by an illustrative example of how the CCA has been applied to drive scientific discovery in quantum chemistry. Thrusts for future research are also described briefly

  1. Integration of Simulink Models with Component-based Software Models

    Directory of Open Access Journals (Sweden)

    MARIAN, N.

    2008-06-01

    Full Text Available Model based development aims to facilitate the development of embedded control systems by emphasizing the separation of the design level from the implementation level. Model based design involves the use of multiple models that represent different views of a system, having different semantics of abstract system descriptions. Usually, in mechatronics systems, design proceeds by iterating model construction, model analysis, and model transformation. Constructing a MATLAB/Simulink model, a plant and controller behavior is simulated using graphical blocks to represent mathematical and logical constructs and process flow, then software code is generated. A Simulink model is a representation of the design or implementation of a physical system that satisfies a set of requirements. A software component-based system aims to organize system architecture and behavior as a means of computation, communication and constraints, using computational blocks and aggregates for both discrete and continuous behavior, different interconnection and execution disciplines for event-based and time-based controllers, and so on, to encompass the demands to more functionality, at even lower prices, and with opposite constraints. COMDES (Component-based Design of Software for Distributed Embedded Systems is such a component-based system framework developed by the software engineering group of Mads Clausen Institute for Product Innovation (MCI, University of Southern Denmark. Once specified, the software model has to be analyzed. One way of doing that is to integrate in wrapper files the model back into Simulink S-functions, and use its extensive simulation features, thus allowing an early exploration of the possible design choices over multiple disciplines. The paper describes a safe translation of a restricted set of MATLAB/Simulink blocks to COMDES software components, both for continuous and discrete behavior, and the transformation of the software system into the S

  2. Analysis of School Food Safety Programs Based on HACCP Principles

    Science.gov (United States)

    Roberts, Kevin R.; Sauer, Kevin; Sneed, Jeannie; Kwon, Junehee; Olds, David; Cole, Kerri; Shanklin, Carol

    2014-01-01

    Purpose/Objectives: The purpose of this study was to determine how school districts have implemented food safety programs based on HACCP principles. Specific objectives included: (1) Evaluate how schools are implementing components of food safety programs; and (2) Determine foodservice employees food-handling practices related to food safety.…

  3. A probabilistic model for component-based shape synthesis

    KAUST Repository

    Kalogerakis, Evangelos

    2012-07-01

    We present an approach to synthesizing shapes from complex domains, by identifying new plausible combinations of components from existing shapes. Our primary contribution is a new generative model of component-based shape structure. The model represents probabilistic relationships between properties of shape components, and relates them to learned underlying causes of structural variability within the domain. These causes are treated as latent variables, leading to a compact representation that can be effectively learned without supervision from a set of compatibly segmented shapes. We evaluate the model on a number of shape datasets with complex structural variability and demonstrate its application to amplification of shape databases and to interactive shape synthesis. © 2012 ACM 0730-0301/2012/08-ART55.

  4. Empirical projection-based basis-component decomposition method

    Science.gov (United States)

    Brendel, Bernhard; Roessl, Ewald; Schlomka, Jens-Peter; Proksa, Roland

    2009-02-01

    Advances in the development of semiconductor based, photon-counting x-ray detectors stimulate research in the domain of energy-resolving pre-clinical and clinical computed tomography (CT). For counting detectors acquiring x-ray attenuation in at least three different energy windows, an extended basis component decomposition can be performed in which in addition to the conventional approach of Alvarez and Macovski a third basis component is introduced, e.g., a gadolinium based CT contrast material. After the decomposition of the measured projection data into the basis component projections, conventional filtered-backprojection reconstruction is performed to obtain the basis-component images. In recent work, this basis component decomposition was obtained by maximizing the likelihood-function of the measurements. This procedure is time consuming and often unstable for excessively noisy data or low intrinsic energy resolution of the detector. Therefore, alternative procedures are of interest. Here, we introduce a generalization of the idea of empirical dual-energy processing published by Stenner et al. to multi-energy, photon-counting CT raw data. Instead of working in the image-domain, we use prior spectral knowledge about the acquisition system (tube spectra, bin sensitivities) to parameterize the line-integrals of the basis component decomposition directly in the projection domain. We compare this empirical approach with the maximum-likelihood (ML) approach considering image noise and image bias (artifacts) and see that only moderate noise increase is to be expected for small bias in the empirical approach. Given the drastic reduction of pre-processing time, the empirical approach is considered a viable alternative to the ML approach.

  5. An analysis of the procedural components of supported employment programs associated with employment outcomes.

    OpenAIRE

    McDonnell, J; Nofs, D; Hardman, M; Chambless, C

    1989-01-01

    This study examined the relation between the procedural components of supported employment programs and employment outcomes for 120 individuals with disabilities. These individuals were involved in supported employment programs established through the Utah Supported Employment Project. The results suggest that successful implementation of supported employment services led to ongoing employment of study participants in community work sites, increased wages, and ongoing opportunities for worker...

  6. Saul: Towards Declarative Learning Based Programming.

    Science.gov (United States)

    Kordjamshidi, Parisa; Roth, Dan; Wu, Hao

    2015-07-01

    We present Saul , a new probabilistic programming language designed to address some of the shortcomings of programming languages that aim at advancing and simplifying the development of AI systems. Such languages need to interact with messy, naturally occurring data, to allow a programmer to specify what needs to be done at an appropriate level of abstraction rather than at the data level, to be developed on a solid theory that supports moving to and reasoning at this level of abstraction and, finally, to support flexible integration of these learning and inference models within an application program. Saul is an object-functional programming language written in Scala that facilitates these by (1) allowing a programmer to learn, name and manipulate named abstractions over relational data; (2) supporting seamless incorporation of trainable (probabilistic or discriminative) components into the program, and (3) providing a level of inference over trainable models to support composition and make decisions that respect domain and application constraints. Saul is developed over a declaratively defined relational data model, can use piecewise learned factor graphs with declaratively specified learning and inference objectives, and it supports inference over probabilistic models augmented with declarative knowledge-based constraints. We describe the key constructs of Saul and exemplify its use in developing applications that require relational feature engineering and structured output prediction.

  7. EDF ageing management program of nuclear components: a safety and economical issue

    International Nuclear Information System (INIS)

    Faidy, C.

    2005-01-01

    Ageing management of Nuclear Power Plants is an essential issue for utilities, in term of safety and availability and corresponding economical consequences. Practically all nuclear countries have developed a systematic program to deal with ageing of components on their plants. This paper presents the ageing management program developed by EDF and that are compared with different other approaches in other countries (IAEA guidelines and GALL report). The paper presents a general overview of the programs, the major results, recommendations and conclusions. (author)

  8. Development of web-based integrity evaluation system for primary components in a nuclear power plant

    International Nuclear Information System (INIS)

    Lee, S.M.; Kim, J.C.; Choi, J.B.; Kim, Y.J.; Choi, S.N.; Jang, K.S.; Hong, S.Y.

    2004-01-01

    A nuclear power plant is composed of a number of primary components. Maintaining the integrity of these components is one of the most critical issues in nuclear industry. In order to maintain the integrity of these primary components, a complicated procedure is required including periodical in-service inspection, failure assessment, fracture mechanics analysis, etc. Also, experts in different fields have to co-operate to resolve the integrity issues on the basis of inspection results. This integrity evaluation process usually takes long, and thus, is detrimental for the plant productivity. Therefore, an effective safety evaluation system is essential to manage integrity issues on a nuclear power plant. In this paper, a web-based integrity evaluation system for primary components in a nuclear power plant is proposed. The proposed system, which is named as WEBIES (web-based integrity evaluation system), has been developed in the form of 3-tier system architecture. The system consists of three servers; application program server, user interface program server and data warehouse server. The application program server includes the defect acceptance analysis module and the fracture mechanics analysis module which are programmed on the basis of ASME sec. XI, appendix A. The data warehouse server provides data for the integrity evaluation including material properties, geometry information, inspection data and stress data. The user interface program server provides information to all co- workers in the field of integrity evaluation. The developed system provides engineering knowledge-based information and concurrent and collaborative working environment through internet, and thus, is expected to raise the efficiency of integrity evaluation procedures on primary components of a nuclear power plant. (orig.)

  9. Development of web-based integrity evaluation system for primary components in a nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.M.; Kim, J.C.; Choi, J.B.; Kim, Y.J. [SAFE Research Center, Sungkyunkwan Univ., Suwon (Korea); Choi, S.N.; Jang, K.S.; Hong, S.Y. [Korea Electronic Power Research Inst., Daejeon (Korea)

    2004-07-01

    A nuclear power plant is composed of a number of primary components. Maintaining the integrity of these components is one of the most critical issues in nuclear industry. In order to maintain the integrity of these primary components, a complicated procedure is required including periodical in-service inspection, failure assessment, fracture mechanics analysis, etc. Also, experts in different fields have to co-operate to resolve the integrity issues on the basis of inspection results. This integrity evaluation process usually takes long, and thus, is detrimental for the plant productivity. Therefore, an effective safety evaluation system is essential to manage integrity issues on a nuclear power plant. In this paper, a web-based integrity evaluation system for primary components in a nuclear power plant is proposed. The proposed system, which is named as WEBIES (web-based integrity evaluation system), has been developed in the form of 3-tier system architecture. The system consists of three servers; application program server, user interface program server and data warehouse server. The application program server includes the defect acceptance analysis module and the fracture mechanics analysis module which are programmed on the basis of ASME sec. XI, appendix A. The data warehouse server provides data for the integrity evaluation including material properties, geometry information, inspection data and stress data. The user interface program server provides information to all co- workers in the field of integrity evaluation. The developed system provides engineering knowledge-based information and concurrent and collaborative working environment through internet, and thus, is expected to raise the efficiency of integrity evaluation procedures on primary components of a nuclear power plant. (orig.)

  10. Polarized BRDF for coatings based on three-component assumption

    Science.gov (United States)

    Liu, Hong; Zhu, Jingping; Wang, Kai; Xu, Rong

    2017-02-01

    A pBRDF(polarized bidirectional reflection distribution function) model for coatings is given based on three-component reflection assumption in order to improve the polarized scattering simulation capability for space objects. In this model, the specular reflection is given based on microfacet theory, the multiple reflection and volume scattering are given separately according to experimental results. The polarization of specular reflection is considered from Fresnel's law, and both multiple reflection and volume scattering are assumed depolarized. Simulation and measurement results of two satellite coating samples SR107 and S781 are given to validate that the pBRDF modeling accuracy can be significantly improved by the three-component model given in this paper.

  11. Secure wireless embedded systems via component-based design

    DEFF Research Database (Denmark)

    Hjorth, T.; Torbensen, R.

    2010-01-01

    This paper introduces the method secure-by-design as a way of constructing wireless embedded systems using component-based modeling frameworks. This facilitates design of secure applications through verified, reusable software. Following this method we propose a security framework with a secure c......, with full support for confidentiality, authentication, and integrity using keypairs. The approach has been demonstrated in a multi-platform home automation prototype that can remotely unlock a door using a PDA over the Internet....

  12. Research on Air Quality Evaluation based on Principal Component Analysis

    Science.gov (United States)

    Wang, Xing; Wang, Zilin; Guo, Min; Chen, Wei; Zhang, Huan

    2018-01-01

    Economic growth has led to environmental capacity decline and the deterioration of air quality. Air quality evaluation as a fundamental of environmental monitoring and air pollution control has become increasingly important. Based on the principal component analysis (PCA), this paper evaluates the air quality of a large city in Beijing-Tianjin-Hebei Area in recent 10 years and identifies influencing factors, in order to provide reference to air quality management and air pollution control.

  13. Implementing components of the routines-based model

    OpenAIRE

    McWilliam, Robin; Fernández Valero, Rosa

    2015-01-01

    The MBR is comprised of 17 components that can generally be grouped into practices related to (a) functional assessment and intervention planning (for example, Routines-Based Interview), (b) organization of services (including location and staffing), (c) service delivery to children and families (using a consultative approach with families and teachers, integrated therapy), (d) classroom organization (for example, classroom zones), and (e) supervision and training through ch...

  14. Empirical usability testing in a component-based environment : improving test efficiency with component-specific usability measures

    NARCIS (Netherlands)

    Brinkman, W.P.; Haakma, R.; Bouwhuis, D.G.; Bastide, R.; Palanque, P.; Roth, J.

    2005-01-01

    This paper addresses the issue of usability testing in a component-based software engineering environment, specifically measuring the usability of different versions of a component in a more powerful manner than other, more holistic, usability methods. Three component-specific usability measures are

  15. Multi-spectrometer calibration transfer based on independent component analysis.

    Science.gov (United States)

    Liu, Yan; Xu, Hao; Xia, Zhenzhen; Gong, Zhiyong

    2018-02-26

    Calibration transfer is indispensable for practical applications of near infrared (NIR) spectroscopy due to the need for precise and consistent measurements across different spectrometers. In this work, a method for multi-spectrometer calibration transfer is described based on independent component analysis (ICA). A spectral matrix is first obtained by aligning the spectra measured on different spectrometers. Then, by using independent component analysis, the aligned spectral matrix is decomposed into the mixing matrix and the independent components of different spectrometers. These differing measurements between spectrometers can then be standardized by correcting the coefficients within the independent components. Two NIR datasets of corn and edible oil samples measured with three and four spectrometers, respectively, were used to test the reliability of this method. The results of both datasets reveal that spectra measurements across different spectrometers can be transferred simultaneously and that the partial least squares (PLS) models built with the measurements on one spectrometer can predict that the spectra can be transferred correctly on another.

  16. Cognitive components underpinning the development of model-based learning.

    Science.gov (United States)

    Potter, Tracey C S; Bryce, Nessa V; Hartley, Catherine A

    2017-06-01

    Reinforcement learning theory distinguishes "model-free" learning, which fosters reflexive repetition of previously rewarded actions, from "model-based" learning, which recruits a mental model of the environment to flexibly select goal-directed actions. Whereas model-free learning is evident across development, recruitment of model-based learning appears to increase with age. However, the cognitive processes underlying the development of model-based learning remain poorly characterized. Here, we examined whether age-related differences in cognitive processes underlying the construction and flexible recruitment of mental models predict developmental increases in model-based choice. In a cohort of participants aged 9-25, we examined whether the abilities to infer sequential regularities in the environment ("statistical learning"), maintain information in an active state ("working memory") and integrate distant concepts to solve problems ("fluid reasoning") predicted age-related improvements in model-based choice. We found that age-related improvements in statistical learning performance did not mediate the relationship between age and model-based choice. Ceiling performance on our working memory assay prevented examination of its contribution to model-based learning. However, age-related improvements in fluid reasoning statistically mediated the developmental increase in the recruitment of a model-based strategy. These findings suggest that gradual development of fluid reasoning may be a critical component process underlying the emergence of model-based learning. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  17. Component Fragility Research Program: Phase 1, Demonstration tests: Volume 1, Summary report

    International Nuclear Information System (INIS)

    Holman, G.S.; Chou, C.K.; Shipway, G.D.; Glozman, V.

    1987-08-01

    This report describes tests performed in Phase I of the NRC Component Fragility Research Program. The purpose of these tests was to demonstrate procedures for characterizing the seismic fragility of a selected component, investigating how various parameters affect fragility, and finally using test data to develop practical fragility descriptions suitable for application in probabilistic risk assessments. A three-column motor control center housing motor controllers of various types and sizes as well as relays of different types and manufacturers was subjected to seismic input motions up to 2.5g zero period acceleration. To investigate the effect of base flexibility on the structural behavior of the MCC and on the functional behavior of the electrical devices, multiple tests were performed on each of four mounting configurations: four bolts per column with top bracking, four bolts per column with no top brace, four bolts per column with internal diagonal bracking, and two bolts per column with no top or internal bracking. Device fragility was characterized by contact chatter correlated to local in-cabinet response at the device location. Seismic capacities were developed for each device on the basis of local input motion required to cause chatter; these results were then applied to develop probabilistic fragility curves for each type of device, including estimates of the ''high-confidence low probability of failure'' capacity of each

  18. Aeromagnetic Compensation Algorithm Based on Principal Component Analysis

    Directory of Open Access Journals (Sweden)

    Peilin Wu

    2018-01-01

    Full Text Available Aeromagnetic exploration is an important exploration method in geophysics. The data is typically measured by optically pumped magnetometer mounted on an aircraft. But any aircraft produces significant levels of magnetic interference. Therefore, aeromagnetic compensation is important in aeromagnetic exploration. However, multicollinearity of the aeromagnetic compensation model degrades the performance of the compensation. To address this issue, a novel aeromagnetic compensation method based on principal component analysis is proposed. Using the algorithm, the correlation in the feature matrix is eliminated and the principal components are using to construct the hyperplane to compensate the platform-generated magnetic fields. The algorithm was tested using a helicopter, and the obtained improvement ratio is 9.86. The compensated quality is almost the same or slightly better than the ridge regression. The validity of the proposed method was experimentally demonstrated.

  19. Robust LOD scores for variance component-based linkage analysis.

    Science.gov (United States)

    Blangero, J; Williams, J T; Almasy, L

    2000-01-01

    The variance component method is now widely used for linkage analysis of quantitative traits. Although this approach offers many advantages, the importance of the underlying assumption of multivariate normality of the trait distribution within pedigrees has not been studied extensively. Simulation studies have shown that traits with leptokurtic distributions yield linkage test statistics that exhibit excessive Type I error when analyzed naively. We derive analytical formulae relating the deviation from the expected asymptotic distribution of the lod score to the kurtosis and total heritability of the quantitative trait. A simple correction constant yields a robust lod score for any deviation from normality and for any pedigree structure, and effectively eliminates the problem of inflated Type I error due to misspecification of the underlying probability model in variance component-based linkage analysis.

  20. A Component Based Approach to Scientific Workflow Management

    CERN Document Server

    Le Goff, Jean-Marie; Baker, Nigel; Brooks, Peter; McClatchey, Richard

    2001-01-01

    CRISTAL is a distributed scientific workflow system used in the manufacturing and production phases of HEP experiment construction at CERN. The CRISTAL project has studied the use of a description driven approach, using meta- modelling techniques, to manage the evolving needs of a large physics community. Interest from such diverse communities as bio-informatics and manufacturing has motivated the CRISTAL team to re-engineer the system to customize functionality according to end user requirements but maximize software reuse in the process. The next generation CRISTAL vision is to build a generic component architecture from which a complete software product line can be generated according to the particular needs of the target enterprise. This paper discusses the issues of adopting a component product line based approach and our experiences of software reuse.

  1. A component based approach to scientific workflow management

    International Nuclear Information System (INIS)

    Baker, N.; Brooks, P.; McClatchey, R.; Kovacs, Z.; LeGoff, J.-M.

    2001-01-01

    CRISTAL is a distributed scientific workflow system used in the manufacturing and production phases of HEP experiment construction at CERN. The CRISTAL project has studied the use of a description driven approach, using meta-modelling techniques, to manage the evolving needs of a large physics community. Interest from such diverse communities as bio-informatics and manufacturing has motivated the CRISTAL team to re-engineer the system to customize functionality according to end user requirements but maximize software reuse in the process. The next generation CRISTAL vision is to build a generic component architecture from which a complete software product line can be generated according to the particular needs of the target enterprise. This paper discusses the issues of adopting a component product line based approach and our experiences of software reuse

  2. EBRPOCO - a program to calculate detailed contributions of power reactivity components of EBR-II

    International Nuclear Information System (INIS)

    Meneghetti, D.; Kucera, D.A.

    1981-01-01

    The EBRPOCO program has been developed to facilitate the calculations of the power coefficients of reactivity of EBR-II loadings. The program enables contributions of various components of the power coefficient to be delineated axially for every subassembly. The program computes the reactivity contributions of the power coefficients resulting from: density reduction of sodium coolant due to temperature; displacement of sodium coolant by thermal expansions of cladding, structural rods, subassembly cans, and lower and upper axial reflectors; density reductions of these steel components due to temperature; displacement of bond-sodium (if present) in gaps by differential thermal expansions of fuel and cladding; density reduction of bond-sodium (if present) in gaps due to temperature; free axial expansion of fuel if unrestricted by cladding or restricted axial expansion of fuel determined by axial expansion of cladding. Isotopic spatial contributions to the Doppler component my also be obtained. (orig.) [de

  3. Radiation Effects and Component Hardening testing program at the Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Draper, J.V.; Weil, B.S.; Chesser, J.B.

    1993-01-01

    This paper describes Phase II of the Radiation Effects and Component Hardening (REACH) testing program, performed as part of the joint collaborative agreement between the United States Department of Energy (USDOE) and the Power Reactor and Nuclear Fuel Development Corporation (PNC) of Japan, Components and materials were submitted to 10 5 R/hr gamma radiation fields for 10,000 hr, producing accumulated doses of 10 9 R; most performed as expected

  4. Laser-Based Maintenance and Repair Technologies for Reactor Components

    International Nuclear Information System (INIS)

    Masaki Yoda; Naruhiko Mukai; Makoto Ochiai; Masataka Tamura; Satoshi Okada; Katsuhiko Sato; Motohiko Kimura; Yuji Sano; Noboru Saito; Seishi Shima; Tetsuo Yamamoto

    2004-01-01

    Toshiba has developed various laser-based maintenance and repair technologies and applied them to existing nuclear power plants. Laser-based technology is considered to be the best tool for remote processing in nuclear power plants, and particularly so for the maintenance and repair of reactor core components. Accessibility could be drastically improved by a simple handling system owing to the absence of reactive force against laser irradiation and the flexible optical fiber. For the preventive maintenance, laser peening (LP) technology was developed and applied to reactor components in operating BWR plants. LP is a novel process to improve residual stress from tensile to compressive on material surface layer by irradiating focused high-power laser pulses in water. We have developed a fiber-delivered LP system as a preventive maintenance measure against stress corrosion cracking (SCC). Laser ultrasonic testing (LUT) has a great potential to be applied to the remote inspection of reactor components. Laser-induced surface acoustic wave (SAW) inspection system was developed using a compact probe with a multi-mode optical fiber and an interferometer. The developed system successfully detected a micro slit of 0.5 mm depth on weld metal and heat-affected zone (HAZ). An artificial SCC was also detected by the system. We are developing a new LP system combined with LUT to treat the inner surface of bottom-mounted instruments (BMI) of PWR plants. Underwater laser seal welding (LSW) technology was also developed to apply surface crack. LSW is expected to isolate the crack tip from corrosive water environment and to stop the propagation of the crack. Rapid heating and cooling of the process minimize the heat effect, which extends the applicability to neutron-irradiated material. This paper describes recent advances in the development and application of such laser-based technologies. (authors)

  5. Principal Component Analysis Based Measure of Structural Holes

    Science.gov (United States)

    Deng, Shiguo; Zhang, Wenqing; Yang, Huijie

    2013-02-01

    Based upon principal component analysis, a new measure called compressibility coefficient is proposed to evaluate structural holes in networks. This measure incorporates a new effect from identical patterns in networks. It is found that compressibility coefficient for Watts-Strogatz small-world networks increases monotonically with the rewiring probability and saturates to that for the corresponding shuffled networks. While compressibility coefficient for extended Barabasi-Albert scale-free networks decreases monotonically with the preferential effect and is significantly large compared with that for corresponding shuffled networks. This measure is helpful in diverse research fields to evaluate global efficiency of networks.

  6. Bayou Choctaw Well Integrity Grading Component Based on Geomechanical Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Park, Byoung [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Geotechnology & Engineering Dept.

    2016-09-08

    This letter report provides a Bayou Choctaw (BC) Strategic Petroleum Reserve (SPR) well grading system based on the geomechanical simulation. The analyses described in this letter were used to evaluate the caverns’ geomechanical effect on wellbore integrity, which is an important component in the well integrity grading system recently developed by Roberts et al. [2015]. Using these analyses, the wellbores for caverns BC-17 and 20 are expected to be significantly impacted by cavern geomechanics, BC-18 and 19 are expected to be medium impacted; and the other caverns are expected to be less impacted.

  7. Priority of VHS Development Based in Potential Area using Principal Component Analysis

    Science.gov (United States)

    Meirawan, D.; Ana, A.; Saripudin, S.

    2018-02-01

    The current condition of VHS is still inadequate in quality, quantity and relevance. The purpose of this research is to analyse the development of VHS based on the development of regional potential by using principal component analysis (PCA) in Bandung, Indonesia. This study used descriptive qualitative data analysis using the principle of secondary data reduction component. The method used is Principal Component Analysis (PCA) analysis with Minitab Statistics Software tool. The results of this study indicate the value of the lowest requirement is a priority of the construction of development VHS with a program of majors in accordance with the development of regional potential. Based on the PCA score found that the main priority in the development of VHS in Bandung is in Saguling, which has the lowest PCA value of 416.92 in area 1, Cihampelas with the lowest PCA value in region 2 and Padalarang with the lowest PCA value.

  8. Youth and Families with Promise: A Multi-Component Youth Development Program

    Directory of Open Access Journals (Sweden)

    Brian J. Higginbotham

    2007-03-01

    Full Text Available Integrating mentoring into existing youth programs has been suggested as a promising approach to youth development. This article discusses a theoretical rationale underlying the integration of one-on-one mentoring into established youth development programs. From an ecological perspective, the addition of mentoring into traditional programs should theoretically enhance the youth development experience. Mentoring, in addition to programs like 4-H, enriches the context in which developing youth are supported and encouraged by non-parental adults to develop competencies, to take on leadership responsibilities, and to integrate into positive peer groups (i.e., 4-H clubs. A multi-component program that involves at-risk youth in both mentoring and 4-H activities is highlighted. Results from at-risk youth and their parents indicate that Utah’s 4-H/ Mentoring: Youth and Families with Promise program strengthens the protective factors of academic achievement, social competence, and family bonds.

  9. Exercise Based- Pain Relief Program

    DEFF Research Database (Denmark)

    Zadeh, Mahdi Hossein

    in the current study was to use exercise induced- muscle damage followed by ECC as an acute pain model and observe its effects on the sensitivity of the nociceptive system and blood supply in healthy subjects. Then, the effect of a repeated bout of the same exercise as a healthy pain relief strategy......Exercise-based pain management programs are suggested for relieving from musculoskeletal pain; however the pain experienced after unaccustomed, especially eccentric exercise (ECC) alters people´s ability to participate in therapeutic exercises. Subsequent muscle pain after ECC has been shown...... to cause localized pressure pain and hyperalgesia. A prior bout of ECC has been repeatedly reported to produce a protective adaptation known as repeated bout effect (RBE). One of the main scopes of the current project was to investigate the adaptations by which the RBE can be resulted from. The approach...

  10. [Development and application of component-based Chinese medicine theory].

    Science.gov (United States)

    Zhang, Jun-Hua; Fan, Guan-Wei; Zhang, Han; Fan, Xiao-Hui; Wang, Yi; Liu, Li-Mei; Li, Chuan; Gao, Yue; Gao, Xiu-Mei; Zhang, Bo-Li

    2017-11-01

    Traditional Chinese medicine (TCM) prescription is the main therapies for disease prevention and treatment in Chinese medicine. Following the guidance of the theory of TCM and developing drug by composing prescriptions of TCM materials and pieces, it is a traditional application mode of TCM, and still widely used in clinic. TCM prescription has theoretical advantages and rich clinical application experience in dealing with multi-factor complex diseases, but scientific research is relatively weak. The lack of scientific cognition of the effective substances and mechanism of Chinese medicine leads to insufficient understanding of the efficacy regularity, which affects the stability of effect and hinders the improvement of quality of Chinese medicinal products. Component-based Chinese medicine (CCM) is an innovation based on inheritance, which breaks through the tradition of experience-based prescription and realize the transformation of compatibility from herbal pieces to components. CCM is an important achievement during the research process of modernization of Chinese medicine. Under the support of three national "973" projects, in order to reveal the scientific connotation of the prescription compatibility theory and develop innovative Chinese drugs, we have launched theoretical innovation and technological innovation around the "two relatively clear", and opened up the research field of CCM. CCM is an innovation based on inheritance, breaking through the tradition of experience based prescription, and realizing the transformation from compatibility of herbal pieces to component compatibility, which is an important achievement of the modernization of traditional Chinese medicine. In the past more than 10 years, with the deepening of research and the expansion of application, the theory and methods of CCM and efficacy-oriented compatibility have been continuously improved. The value of CCM is not only in developing new drug, more important is to build a

  11. Nonlinear Process Fault Diagnosis Based on Serial Principal Component Analysis.

    Science.gov (United States)

    Deng, Xiaogang; Tian, Xuemin; Chen, Sheng; Harris, Chris J

    2018-03-01

    Many industrial processes contain both linear and nonlinear parts, and kernel principal component analysis (KPCA), widely used in nonlinear process monitoring, may not offer the most effective means for dealing with these nonlinear processes. This paper proposes a new hybrid linear-nonlinear statistical modeling approach for nonlinear process monitoring by closely integrating linear principal component analysis (PCA) and nonlinear KPCA using a serial model structure, which we refer to as serial PCA (SPCA). Specifically, PCA is first applied to extract PCs as linear features, and to decompose the data into the PC subspace and residual subspace (RS). Then, KPCA is performed in the RS to extract the nonlinear PCs as nonlinear features. Two monitoring statistics are constructed for fault detection, based on both the linear and nonlinear features extracted by the proposed SPCA. To effectively perform fault identification after a fault is detected, an SPCA similarity factor method is built for fault recognition, which fuses both the linear and nonlinear features. Unlike PCA and KPCA, the proposed method takes into account both linear and nonlinear PCs simultaneously, and therefore, it can better exploit the underlying process's structure to enhance fault diagnosis performance. Two case studies involving a simulated nonlinear process and the benchmark Tennessee Eastman process demonstrate that the proposed SPCA approach is more effective than the existing state-of-the-art approach based on KPCA alone, in terms of nonlinear process fault detection and identification.

  12. Integration of Simulink Models with Component-based Software Models

    DEFF Research Database (Denmark)

    Marian, Nicolae; Top, Søren

    2008-01-01

    , communication and constraints, using computational blocks and aggregates for both discrete and continuous behaviour, different interconnection and execution disciplines for event-based and time-based controllers, and so on, to encompass the demands to more functionality, at even lower prices, and with opposite...... to be analyzed. One way of doing that is to integrate in wrapper files the model back into Simulink S-functions, and use its extensive simulation features, thus allowing an early exploration of the possible design choices over multiple disciplines. The paper describes a safe translation of a restricted set...... of MATLAB/Simulink blocks to COMDES software components, both for continuous and discrete behaviour, and the transformation of the software system into the S-functions. The general aim of this work is the improvement of multi-disciplinary development of embedded systems with the focus on the relation...

  13. The Use of Workforce Assessment as a Component of Career and Technical Education Program Evaluation

    Science.gov (United States)

    Bartlett, Kenneth R.; Schleif, Nicole L.; Bowen, Mauvalyn M.

    2011-01-01

    This research project examined the extent to which Career and Technical Education (CTE)-related programs use workforce needs assessment as a component of their evaluation activities. An employer perspective was used to develop a conceptual framework drawing on strategic human resource management theory. The extent and methods utilized for…

  14. Millennial and Non-Millennial Agriculture Teachers' Current and Ideal Emphasis on the Three Components of the Agricultural Education Program

    Science.gov (United States)

    Shoulders, Catherine W.; Toland, Hannah

    2017-01-01

    Classroom and laboratory instruction, FFA, and SAE have long represented the complete agricultural education program via the three-component model. While the model depicts three circles of equal size to represent these components, the focus and level of emphasis of each component within the agriculture program is the decision of the agriculture…

  15. Modelling raster-based monthly water balance components for Europe

    Energy Technology Data Exchange (ETDEWEB)

    Ulmen, C.

    2000-11-01

    The terrestrial runoff component is a comparatively small but sensitive and thus significant quantity in the global energy and water cycle at the interface between landmass and atmosphere. As opposed to soil moisture and evapotranspiration which critically determine water vapour fluxes and thus water and energy transport, it can be measured as an integrated quantity over a large area, i.e. the river basin. This peculiarity makes terrestrial runoff ideally suited for the calibration, verification and validation of general circulation models (GCMs). Gauging stations are not homogeneously distributed in space. Moreover, time series are not necessarily continuously measured nor do they in general have overlapping time periods. To overcome this problems with regard to regular grid spacing used in GCMs, different methods can be applied to transform irregular data to regular so called gridded runoff fields. The present work aims to directly compute the gridded components of the monthly water balance (including gridded runoff fields) for Europe by application of the well-established raster-based macro-scale water balance model WABIMON used at the Federal Institute of Hydrology, Germany. Model calibration and validation is performed by separated examination of 29 representative European catchments. Results indicate a general applicability of the model delivering reliable overall patterns and integrated quantities on a monthly basis. For time steps less then too weeks further research and structural improvements of the model are suggested. (orig.)

  16. High Q, Miniaturized LCP-Based Passive Components

    KAUST Repository

    Shamim, Atif

    2014-10-16

    Various methods and systems are provided for high Q, miniaturized LCP-based passive components. In one embodiment, among others, a spiral inductor includes a center connection and a plurality of inductors formed on a liquid crystal polymer (LCP) layer, the plurality of inductors concentrically spiraling out from the center connection. In another embodiment, a vertically intertwined inductor includes first and second inductors including a first section disposed on a side of the LCP layer forming a fraction of a turn and a second section disposed on another side of the LCP layer. At least a portion of the first section of the first inductor is substantially aligned with at least a portion of the second section of the second inductor and at least a portion of the first section of the second inductor is substantially aligned with at least a portion of the second section of the first inductor.

  17. High Q, Miniaturized LCP-Based Passive Components

    KAUST Repository

    Shamim, Atif; Arabi, Eyad A.

    2014-01-01

    Various methods and systems are provided for high Q, miniaturized LCP-based passive components. In one embodiment, among others, a spiral inductor includes a center connection and a plurality of inductors formed on a liquid crystal polymer (LCP) layer, the plurality of inductors concentrically spiraling out from the center connection. In another embodiment, a vertically intertwined inductor includes first and second inductors including a first section disposed on a side of the LCP layer forming a fraction of a turn and a second section disposed on another side of the LCP layer. At least a portion of the first section of the first inductor is substantially aligned with at least a portion of the second section of the second inductor and at least a portion of the first section of the second inductor is substantially aligned with at least a portion of the second section of the first inductor.

  18. Iris recognition based on robust principal component analysis

    Science.gov (United States)

    Karn, Pradeep; He, Xiao Hai; Yang, Shuai; Wu, Xiao Hong

    2014-11-01

    Iris images acquired under different conditions often suffer from blur, occlusion due to eyelids and eyelashes, specular reflection, and other artifacts. Existing iris recognition systems do not perform well on these types of images. To overcome these problems, we propose an iris recognition method based on robust principal component analysis. The proposed method decomposes all training images into a low-rank matrix and a sparse error matrix, where the low-rank matrix is used for feature extraction. The sparsity concentration index approach is then applied to validate the recognition result. Experimental results using CASIA V4 and IIT Delhi V1iris image databases showed that the proposed method achieved competitive performances in both recognition accuracy and computational efficiency.

  19. Performance-based planning and programming guidebook.

    Science.gov (United States)

    2013-09-01

    "Performance-based planning and programming (PBPP) refers to the application of performance management principles within the planning and programming processes of transportation agencies to achieve desired performance outcomes for the multimodal tran...

  20. Performance of nickel base superalloy components in gas turbines

    DEFF Research Database (Denmark)

    Dahl, Kristian Vinter

    2006-01-01

    The topic of this thesis is the microstructural behaviour of hot section components in the industrial gas turbine......The topic of this thesis is the microstructural behaviour of hot section components in the industrial gas turbine...

  1. TITAN: a computer program for accident occurrence frequency analyses by component Monte Carlo simulation

    International Nuclear Information System (INIS)

    Nomura, Yasushi; Tamaki, Hitoshi; Kanai, Shigeru

    2000-04-01

    In a plant system consisting of complex equipments and components for a reprocessing facility, there might be grace time between an initiating event and a resultant serious accident, allowing operating personnel to take remedial actions, thus, terminating the ongoing accident sequence. A component Monte Carlo simulation computer program TITAN has been developed to analyze such a complex reliability model including the grace time without any difficulty to obtain an accident occurrence frequency. Firstly, basic methods for the component Monte Carlo simulation is introduced to obtain an accident occurrence frequency, and then, the basic performance such as precision, convergence, and parallelization of calculation, is shown through calculation of a prototype accident sequence model. As an example to illustrate applicability to a real scale plant model, a red oil explosion in a German reprocessing plant model is simulated to show that TITAN can give an accident occurrence frequency with relatively good accuracy. Moreover, results of uncertainty analyses by TITAN are rendered to show another performance, and a proposal is made for introducing of a new input-data format to adapt the component Monte Carlo simulation. The present paper describes the calculational method, performance, applicability to a real scale, and new proposal for the TITAN code. In the Appendixes, a conventional analytical method is shown to avoid complex and laborious calculation to obtain a strict solution of accident occurrence frequency, compared with Monte Carlo method. The user's manual and the list/structure of program are also contained in the Appendixes to facilitate TITAN computer program usage. (author)

  2. A model surveillance program based on regulatory experience

    International Nuclear Information System (INIS)

    Conte, R.J.

    1980-01-01

    A model surveillance program is presented based on regulatory experience. The program consists of three phases: Program Delineation, Data Acquistion and Data Analysis. Each phase is described in terms of key quality assurance elements and some current philosophies is the United States Licensing Program. Other topics include the application of these ideas to test equipment used in the surveillance progam and audits of the established program. Program Delineation discusses the establishment of administrative controls for organization and the description of responsibilities using the 'Program Coordinator' concept, with assistance from Data Acquisition and Analysis Teams. Ideas regarding frequency of surveillance testing are also presented. The Data Acquisition Phase discusses various methods for acquiring data including operator observations, test procedures, operator logs, and computer output, for trending equipment performance. The Data Analysis Phase discusses the process for drawing conclusions regarding component/equipment service life, proper application, and generic problems through the use of trend analysis and failure rate data. (orig.)

  3. Repository-Based Software Engineering Program: Working Program Management Plan

    Science.gov (United States)

    1993-01-01

    Repository-Based Software Engineering Program (RBSE) is a National Aeronautics and Space Administration (NASA) sponsored program dedicated to introducing and supporting common, effective approaches to software engineering practices. The process of conceiving, designing, building, and maintaining software systems by using existing software assets that are stored in a specialized operational reuse library or repository, accessible to system designers, is the foundation of the program. In addition to operating a software repository, RBSE promotes (1) software engineering technology transfer, (2) academic and instructional support of reuse programs, (3) the use of common software engineering standards and practices, (4) software reuse technology research, and (5) interoperability between reuse libraries. This Program Management Plan (PMP) is intended to communicate program goals and objectives, describe major work areas, and define a management report and control process. This process will assist the Program Manager, University of Houston at Clear Lake (UHCL) in tracking work progress and describing major program activities to NASA management. The goal of this PMP is to make managing the RBSE program a relatively easy process that improves the work of all team members. The PMP describes work areas addressed and work efforts being accomplished by the program; however, it is not intended as a complete description of the program. Its focus is on providing management tools and management processes for monitoring, evaluating, and administering the program; and it includes schedules for charting milestones and deliveries of program products. The PMP was developed by soliciting and obtaining guidance from appropriate program participants, analyzing program management guidance, and reviewing related program management documents.

  4. Reliability and integrity management program for PBMR helium pressure boundary components - HTR2008-58036

    International Nuclear Information System (INIS)

    Fleming, K. N.; Gamble, R.; Gosselin, S.; Fletcher, J.; Broom, N.

    2008-01-01

    The purpose of this paper is to present the results of a study to establish strategies for the reliability and integrity management (RIM) of passive metallic components for the PBMR. The RIM strategies investigated include design elements, leak detection and testing approaches, and non-destructive examinations. Specific combinations of strategies are determined to be necessary and sufficient to achieve target reliability goals for passive components. This study recommends a basis for the RIM program for the PBMR Demonstration Power Plant (DPP) and provides guidance for the development by the American Society of Mechanical Engineers (ASME) of RIM requirements for Modular High Temperature Gas-Cooled Reactors (MHRs). (authors)

  5. BWR Refill-Reflood Program, Task 4.7 - model development: TRAC-BWR component models

    International Nuclear Information System (INIS)

    Cheung, Y.K.; Parameswaran, V.; Shaug, J.C.

    1983-09-01

    TRAC (Transient Reactor Analysis Code) is a computer code for best-estimate analysis for the thermal hydraulic conditions in a reactor system. The development and assessment of the BWR component models developed under the Refill/Reflood Program that are necessary to structure a BWR-version of TRAC are described in this report. These component models are the jet pump, steam separator, steam dryer, two-phase level tracking model, and upper-plenum mixing model. These models have been implemented into TRAC-B02. Also a single-channel option has been developed for individual fuel-channel analysis following a system-response calculation

  6. Evaluating the hydrological consistency of satellite based water cycle components

    KAUST Repository

    Lopez Valencia, Oliver Miguel

    2016-06-15

    Advances in multi-satellite based observations of the earth system have provided the capacity to retrieve information across a wide-range of land surface hydrological components and provided an opportunity to characterize terrestrial processes from a completely new perspective. Given the spatial advantage that space-based observations offer, several regional-to-global scale products have been developed, offering insights into the multi-scale behaviour and variability of hydrological states and fluxes. However, one of the key challenges in the use of satellite-based products is characterizing the degree to which they provide realistic and representative estimates of the underlying retrieval: that is, how accurate are the hydrological components derived from satellite observations? The challenge is intrinsically linked to issues of scale, since the availability of high-quality in-situ data is limited, and even where it does exist, is generally not commensurate to the resolution of the satellite observation. Basin-scale studies have shown considerable variability in achieving water budget closure with any degree of accuracy using satellite estimates of the water cycle. In order to assess the suitability of this type of approach for evaluating hydrological observations, it makes sense to first test it over environments with restricted hydrological inputs, before applying it to more hydrological complex basins. Here we explore the concept of hydrological consistency, i.e. the physical considerations that the water budget impose on the hydrologic fluxes and states to be temporally and spatially linked, to evaluate the reproduction of a set of large-scale evaporation (E) products by using a combination of satellite rainfall (P) and Gravity Recovery and Climate Experiment (GRACE) observations of storage change, focusing on arid and semi-arid environments, where the hydrological flows can be more realistically described. Our results indicate no persistent hydrological

  7. Designing an Elderly Assistance Program Based-on Home Care

    Science.gov (United States)

    Umusya'adah, L.; Juwaedah, A.; Jubaedah, Y.; Ratnasusanti, H.; Puspita, R. H.

    2018-02-01

    PKH (Program Keluarga Harapan) is a program of Indonesia’s Government through the ministry of social directorate to accelerate the poverty reduction and the achievement of Millennium Development Goals (MDGs) target as well as the policies development in social protection and social welfare domain or commonly referred to as Indonesian Conditional Cash Transfer (CCT) Program. This research is motivated that existing participants of the family expectation program (PKH) that already exist in Sumedang, Indoensia, especially in the South Sumedang on the social welfare components is only limited to the health checking, while for assisting the elderly based Home Care program there has been no structured and systematic, where as the elderly still need assistance, especially from the family and community environment. This study uses a method of Research and Development with Model Addie which include analysis, design, development, implementation and evaluation. Participants in this study using purposive sampling, where selected families of PKH who provide active assistance to the elderly with 82 participants. The program is designed consists of program components: objectives, goals, forms of assistance, organizing institutions and implementing the program, besides, program modules include assisting the elderly. Form of assistance the elderly cover physical, social, mental and spiritual. Recommended for families and companions PKH, the program can be implemented to meet the various needs of the elderly. For the elderly should introspect, especially in the health and follow the advice recommended by related parties

  8. General purpose nonlinear analysis program FINAS for elevated temperature design of FBR components

    International Nuclear Information System (INIS)

    Iwata, K.; Atsumo, H.; Kano, T.; Takeda, H.

    1982-01-01

    This paper presents currently available capabilities of a general purpose finite element nonlinear analysis program FINAS (FBR Inelastic Structural Analysis System) which has been developed at Power Reactor and Nuclear Fuel Development Corporation (PNC) since 1976 to support structural design of fast breeder reactor (FBR) components in Japan. This program is capable of treating inelastic responses of arbitrary complex structures subjected to static and dynamic load histories. Various types of finite element covering rods, beams, pipes, axisymmetric, two and three dimensional solids, plates and shells, are implemented in the program. The thermal elastic-plastic creep analysis is possible for each element type, with primary emphasis on the application to FBR components subjected to sustained or cyclic loads at elevated temperature. The program permits large deformation, buckling, fracture mechanics, and dynamic analyses for some of the element types and provides a number of options for automatic mesh generation and computer graphics. Some examples including elevated temperature effects are shown to demonstrate the accuracy and the efficiency of the program

  9. 78 FR 6344 - Certain Wireless Communications Base Stations and Components Thereof Notice of Receipt of...

    Science.gov (United States)

    2013-01-30

    ... INTERNATIONAL TRADE COMMISSION Certain Wireless Communications Base Stations and Components.... International Trade Commission has received a complaint entitled Certain Wireless Communications Base Stations... communications base stations and components thereof. The complaint names as respondents Telefonaktiebolaget LM...

  10. Application of fuzzy-MOORA method: Ranking of components for reliability estimation of component-based software systems

    Directory of Open Access Journals (Sweden)

    Zeeshan Ali Siddiqui

    2016-01-01

    Full Text Available Component-based software system (CBSS development technique is an emerging discipline that promises to take software development into a new era. As hardware systems are presently being constructed from kits of parts, software systems may also be assembled from components. It is more reliable to reuse software than to create. It is the glue code and individual components reliability that contribute to the reliability of the overall system. Every component contributes to overall system reliability according to the number of times it is being used, some components are of critical usage, known as usage frequency of component. The usage frequency decides the weight of each component. According to their weights, each component contributes to the overall reliability of the system. Therefore, ranking of components may be obtained by analyzing their reliability impacts on overall application. In this paper, we propose the application of fuzzy multi-objective optimization on the basis of ratio analysis, Fuzzy-MOORA. The method helps us find the best suitable alternative, software component, from a set of available feasible alternatives named software components. It is an accurate and easy to understand tool for solving multi-criteria decision making problems that have imprecise and vague evaluation data. By the use of ratio analysis, the proposed method determines the most suitable alternative among all possible alternatives, and dimensionless measurement will realize the job of ranking of components for estimating CBSS reliability in a non-subjective way. Finally, three case studies are shown to illustrate the use of the proposed technique.

  11. Components of effective randomized controlled trials of hydrotherapy programs for fibromyalgia syndrome: A systematic review

    OpenAIRE

    Perraton, Luke; Machotka, Zuzana; Kumar, Saravana

    2009-01-01

    Luke Perraton, Zuzana Machotka, Saravana KumarInternational Centre for Allied Health Evidence, University of South Australia, Adelaide, South Australia, AustraliaAim: Previous systematic reviews have found hydrotherapy to be an effective management strategy for fibromyalgia syndrome (FMS). The aim of this systematic review was to summarize the components of hydrotherapy programs used in randomized controlled trials.Method: A systematic review of randomized controlled trials was conducted. Onl...

  12. Material testing facilities and programs for plasma-facing component testing

    Science.gov (United States)

    Linsmeier, Ch.; Unterberg, B.; Coenen, J. W.; Doerner, R. P.; Greuner, H.; Kreter, A.; Linke, J.; Maier, H.

    2017-09-01

    Component development for operation in a large-scale fusion device requires thorough testing and qualification for the intended operational conditions. In particular environments are necessary which are comparable to the real operation conditions, allowing at the same time for in situ/in vacuo diagnostics and flexible operation, even beyond design limits during the testing. Various electron and neutral particle devices provide the capabilities for high heat load tests, suited for material samples and components from lab-scale dimensions up to full-size parts, containing toxic materials like beryllium, and being activated by neutron irradiation. To simulate the conditions specific to a fusion plasma both at the first wall and in the divertor of fusion devices, linear plasma devices allow for a test of erosion and hydrogen isotope recycling behavior under well-defined and controlled conditions. Finally, the complex conditions in a fusion device (including the effects caused by magnetic fields) are exploited for component and material tests by exposing test mock-ups or material samples to a fusion plasma by manipulator systems. They allow for easy exchange of test pieces in a tokamak or stellarator device, without opening the vessel. Such a chain of test devices and qualification procedures is required for the development of plasma-facing components which then can be successfully operated in future fusion power devices. The various available as well as newly planned devices and test stands, together with their specific capabilities, are presented in this manuscript. Results from experimental programs on test facilities illustrate their significance for the qualification of plasma-facing materials and components. An extended set of references provides access to the current status of material and component testing capabilities in the international fusion programs.

  13. Facilitators, barriers, and components of a culturally tailored afterschool physical activity program in preadolescent African American girls and their mothers.

    Science.gov (United States)

    Alhassan, Sofiya; Greever, Cory; Nwaokelemeh, Ogechi; Mendoza, Albert; Barr-Anderson, Daheia J

    2014-01-01

    Traditional physical activity (PA) programs have not been effective in increasing PA in African American girls. Currently, there is limited information regarding the components of PA programs that drive participation in African American girls. The purpose of our investigation was to describe the facilitators, barriers, and components of a culturally tailored afterschool PA program that will potentially inspire the participation of African American mother-daughter dyads. Six focus groups (n=12 mother-daughter dyads; daughters, 7-10 yrs in age) were conducted between March and May 2012. Focus group semi-structured interviews were transcribed, coded, and systematically analyzed using NVivo. Mothers reported a preference for non-traditional (dancing, household chores) types of PA. While daughters preferred to participate in both dance-based and traditional types (walking, riding bikes) of PA. Participants felt that the use of a culturally tailored dance program would be appealing because it highlights the cultural and historical legacy of the African American culture. Mothers wanted programs that would allow them time to spend with their daughters. Top three dance styles that mothers wanted to participate in were African, hip-hop, and Salsa/samba, while daughters reported that they would enjoy participating in hip-hop, African, and jazz. The most common responses given for resources needed for participating in a culturally tailored afterschool dance program were the location of the program, transportation, and childcare for siblings. Our investigation highlights some cultural factors related to facilitators and barriers of PA that should be addressed in designing PA studies for African American girls and their mothers.

  14. Cnn Based Retinal Image Upscaling Using Zero Component Analysis

    Science.gov (United States)

    Nasonov, A.; Chesnakov, K.; Krylov, A.

    2017-05-01

    The aim of the paper is to obtain high quality of image upscaling for noisy images that are typical in medical image processing. A new training scenario for convolutional neural network based image upscaling method is proposed. Its main idea is a novel dataset preparation method for deep learning. The dataset contains pairs of noisy low-resolution images and corresponding noiseless highresolution images. To achieve better results at edges and textured areas, Zero Component Analysis is applied to these images. The upscaling results are compared with other state-of-the-art methods like DCCI, SI-3 and SRCNN on noisy medical ophthalmological images. Objective evaluation of the results confirms high quality of the proposed method. Visual analysis shows that fine details and structures like blood vessels are preserved, noise level is reduced and no artifacts or non-existing details are added. These properties are essential in retinal diagnosis establishment, so the proposed algorithm is recommended to be used in real medical applications.

  15. Service oriented architecture assessment based on software components

    Directory of Open Access Journals (Sweden)

    Mahnaz Amirpour

    2016-01-01

    Full Text Available Enterprise architecture, with detailed descriptions of the functions of information technology in the organization, tries to reduce the complexity of technology applications resulting in tools with greater efficiency in achieving the objectives of the organization. Enterprise architecture consists of a set of models describing this technology in different components performance as well as various aspects of the applications in any organization. Therefore, information technology development and maintenance management can perform well within organizations. This study aims to suggest a method to identify different types of services in service-oriented architecture analysis step that applies some previous approaches in an integrated form and, based on the principles of software engineering, to provide a simpler and more transparent approach through the expression of analysis details. Advantages and disadvantages of proposals should be evaluated before the implementation and costs allocation. Evaluation methods can better identify strengths and weaknesses of the current situation apart from selecting appropriate model out of several suggestions, and clarify this technology development solution for organizations in the future. We will be able to simulate data and processes flow within the organization by converting the output of the model to colored Petri nets and evaluate and test it by examining various inputs to enterprise architecture before implemented in terms of reliability and response time. A model of application has been studied for the proposed model and the results can describe and design architecture for data.

  16. Internet MEMS design tools based on component technology

    Science.gov (United States)

    Brueck, Rainer; Schumer, Christian

    1999-03-01

    The micro electromechanical systems (MEMS) industry in Europe is characterized by small and medium sized enterprises specialized on products to solve problems in specific domains like medicine, automotive sensor technology, etc. In this field of business the technology driven design approach known from micro electronics is not appropriate. Instead each design problem aims at its own, specific technology to be used for the solution. The variety of technologies at hand, like Si-surface, Si-bulk, LIGA, laser, precision engineering requires a huge set of different design tools to be available. No single SME can afford to hold licenses for all these tools. This calls for a new and flexible way of designing, implementing and distributing design software. The Internet provides a flexible manner of offering software access along with methodologies of flexible licensing e.g. on a pay-per-use basis. New communication technologies like ADSL, TV cable of satellites as carriers promise to offer a bandwidth sufficient even for interactive tools with graphical interfaces in the near future. INTERLIDO is an experimental tool suite for process specification and layout verification for lithography based MEMS technologies to be accessed via the Internet. The first version provides a Java implementation even including a graphical editor for process specification. Currently, a new version is brought into operation that is based on JavaBeans component technology. JavaBeans offers the possibility to realize independent interactive design assistants, like a design rule checking assistants, a process consistency checking assistants, a technology definition assistants, a graphical editor assistants, etc. that may reside distributed over the Internet, communicating via Internet protocols. Each potential user thus is able to configure his own dedicated version of a design tool set dedicated to the requirements of the current problem to be solved.

  17. Structural aging program to assess the adequacy of critical concrete components in nuclear power plants

    International Nuclear Information System (INIS)

    Naus, D.J.; Marchbanks, M.F.; Oland, C.B.; Arndt, E.G.

    1989-01-01

    The Structural Aging (SAG) Program is carried out by the Oak Ridge National Laboratory (ORNL) under sponsorship of the United States Nuclear Regulatory Commission (USNRC). The Program has evolved from preliminary studies conducted to evaluate the long-term environmental challenges to light-water reactor safety-related concrete civil structures. An important conclusion of these studies was that a damage methodology, which can provide a quantitative measure of a concrete structure's durability with respect to potential future requirements, needs to be developed. Under the SAG Program, this issue is being addressed through: establishment of a structural materials information center, evaluation of structural component assessment and repair technologies, and development of a quantitative methodology for structural aging determinations. Progress to date of each of these activities is presented as well as future plans. 7 refs., 5 figs

  18. Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    International Nuclear Information System (INIS)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun

    2004-02-01

    The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds

  19. Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2004-02-15

    The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds.

  20. Developments of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2003-03-15

    The objective of this research is to develop an efficient evaluation technology and to investigate applicability of newly-developed technology, such as internet-based cyber platform, to operating power plants. Development of efficient evaluation systems for Nuclear Power Plant components, based on structural integrity assessment techniques, are increasingly demanded for safe operation with the increasing operating period of Nuclear Power Plants. The following five topics are covered in this project: development of assessment method for wall-thinned nuclear piping based on pipe test; development of structural integrity program for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for mam components of NPP; development of internet-based cyber platform and integrity program for primary components of NPP; effect of aging on strength of dissimilar welds.

  1. Multistage principal component analysis based method for abdominal ECG decomposition

    International Nuclear Information System (INIS)

    Petrolis, Robertas; Krisciukaitis, Algimantas; Gintautas, Vladas

    2015-01-01

    Reflection of fetal heart electrical activity is present in registered abdominal ECG signals. However this signal component has noticeably less energy than concurrent signals, especially maternal ECG. Therefore traditionally recommended independent component analysis, fails to separate these two ECG signals. Multistage principal component analysis (PCA) is proposed for step-by-step extraction of abdominal ECG signal components. Truncated representation and subsequent subtraction of cardio cycles of maternal ECG are the first steps. The energy of fetal ECG component then becomes comparable or even exceeds energy of other components in the remaining signal. Second stage PCA concentrates energy of the sought signal in one principal component assuring its maximal amplitude regardless to the orientation of the fetus in multilead recordings. Third stage PCA is performed on signal excerpts representing detected fetal heart beats in aim to perform their truncated representation reconstructing their shape for further analysis. The algorithm was tested with PhysioNet Challenge 2013 signals and signals recorded in the Department of Obstetrics and Gynecology, Lithuanian University of Health Sciences. Results of our method in PhysioNet Challenge 2013 on open data set were: average score: 341.503 bpm 2 and 32.81 ms. (paper)

  2. The International Coal Statistics Data Base program maintenance guide

    International Nuclear Information System (INIS)

    1991-06-01

    The International Coal Statistics Data Base (ICSD) is a microcomputer-based system which contains information related to international coal trade. This includes coal production, consumption, imports and exports information. The ICSD is a secondary data base, meaning that information contained therein is derived entirely from other primary sources. It uses dBase III+ and Lotus 1-2-3 to locate, report and display data. The system is used for analysis in preparing the Annual Prospects for World Coal Trade (DOE/EIA-0363) publication. The ICSD system is menu driven and also permits the user who is familiar with dBase and Lotus operations to leave the menu structure to perform independent queries. Documentation for the ICSD consists of three manuals -- the User's Guide, the Operations Manual, and the Program Maintenance Manual. This Program Maintenance Manual provides the information necessary to maintain and update the ICSD system. Two major types of program maintenance documentation are presented in this manual. The first is the source code for the dBase III+ routines and related non-dBase programs used in operating the ICSD. The second is listings of the major component database field structures. A third important consideration for dBase programming, the structure of index files, is presented in the listing of source code for the index maintenance program. 1 fig

  3. A flexible framework for sparse simultaneous component based data integration

    Directory of Open Access Journals (Sweden)

    Van Deun Katrijn

    2011-11-01

    Full Text Available Abstract 1 Background High throughput data are complex and methods that reveal structure underlying the data are most useful. Principal component analysis, frequently implemented as a singular value decomposition, is a popular technique in this respect. Nowadays often the challenge is to reveal structure in several sources of information (e.g., transcriptomics, proteomics that are available for the same biological entities under study. Simultaneous component methods are most promising in this respect. However, the interpretation of the principal and simultaneous components is often daunting because contributions of each of the biomolecules (transcripts, proteins have to be taken into account. 2 Results We propose a sparse simultaneous component method that makes many of the parameters redundant by shrinking them to zero. It includes principal component analysis, sparse principal component analysis, and ordinary simultaneous component analysis as special cases. Several penalties can be tuned that account in different ways for the block structure present in the integrated data. This yields known sparse approaches as the lasso, the ridge penalty, the elastic net, the group lasso, sparse group lasso, and elitist lasso. In addition, the algorithmic results can be easily transposed to the context of regression. Metabolomics data obtained with two measurement platforms for the same set of Escherichia coli samples are used to illustrate the proposed methodology and the properties of different penalties with respect to sparseness across and within data blocks. 3 Conclusion Sparse simultaneous component analysis is a useful method for data integration: First, simultaneous analyses of multiple blocks offer advantages over sequential and separate analyses and second, interpretation of the results is highly facilitated by their sparseness. The approach offered is flexible and allows to take the block structure in different ways into account. As such

  4. A flexible framework for sparse simultaneous component based data integration.

    Science.gov (United States)

    Van Deun, Katrijn; Wilderjans, Tom F; van den Berg, Robert A; Antoniadis, Anestis; Van Mechelen, Iven

    2011-11-15

    High throughput data are complex and methods that reveal structure underlying the data are most useful. Principal component analysis, frequently implemented as a singular value decomposition, is a popular technique in this respect. Nowadays often the challenge is to reveal structure in several sources of information (e.g., transcriptomics, proteomics) that are available for the same biological entities under study. Simultaneous component methods are most promising in this respect. However, the interpretation of the principal and simultaneous components is often daunting because contributions of each of the biomolecules (transcripts, proteins) have to be taken into account. We propose a sparse simultaneous component method that makes many of the parameters redundant by shrinking them to zero. It includes principal component analysis, sparse principal component analysis, and ordinary simultaneous component analysis as special cases. Several penalties can be tuned that account in different ways for the block structure present in the integrated data. This yields known sparse approaches as the lasso, the ridge penalty, the elastic net, the group lasso, sparse group lasso, and elitist lasso. In addition, the algorithmic results can be easily transposed to the context of regression. Metabolomics data obtained with two measurement platforms for the same set of Escherichia coli samples are used to illustrate the proposed methodology and the properties of different penalties with respect to sparseness across and within data blocks. Sparse simultaneous component analysis is a useful method for data integration: First, simultaneous analyses of multiple blocks offer advantages over sequential and separate analyses and second, interpretation of the results is highly facilitated by their sparseness. The approach offered is flexible and allows to take the block structure in different ways into account. As such, structures can be found that are exclusively tied to one data platform

  5. TITAN: a computer program for accident occurrence frequency analyses by component Monte Carlo simulation

    Energy Technology Data Exchange (ETDEWEB)

    Nomura, Yasushi [Department of Fuel Cycle Safety Research, Nuclear Safety Research Center, Tokai Research Establishment, Japan Atomic Energy Research Institute, Tokai, Ibaraki (Japan); Tamaki, Hitoshi [Department of Safety Research Technical Support, Tokai Research Establishment, Japan Atomic Energy Research Institute, Tokai, Ibaraki (Japan); Kanai, Shigeru [Fuji Research Institute Corporation, Tokyo (Japan)

    2000-04-01

    In a plant system consisting of complex equipments and components for a reprocessing facility, there might be grace time between an initiating event and a resultant serious accident, allowing operating personnel to take remedial actions, thus, terminating the ongoing accident sequence. A component Monte Carlo simulation computer program TITAN has been developed to analyze such a complex reliability model including the grace time without any difficulty to obtain an accident occurrence frequency. Firstly, basic methods for the component Monte Carlo simulation is introduced to obtain an accident occurrence frequency, and then, the basic performance such as precision, convergence, and parallelization of calculation, is shown through calculation of a prototype accident sequence model. As an example to illustrate applicability to a real scale plant model, a red oil explosion in a German reprocessing plant model is simulated to show that TITAN can give an accident occurrence frequency with relatively good accuracy. Moreover, results of uncertainty analyses by TITAN are rendered to show another performance, and a proposal is made for introducing of a new input-data format to adapt the component Monte Carlo simulation. The present paper describes the calculational method, performance, applicability to a real scale, and new proposal for the TITAN code. In the Appendixes, a conventional analytical method is shown to avoid complex and laborious calculation to obtain a strict solution of accident occurrence frequency, compared with Monte Carlo method. The user's manual and the list/structure of program are also contained in the Appendixes to facilitate TITAN computer program usage. (author)

  6. Improving the Effectiveness of the Bio-slurry Extension Component of National Biodigester Program in Cambodia

    Energy Technology Data Exchange (ETDEWEB)

    Islam, M. F.

    2009-10-15

    This report deals with the escalating challenge Cambodia faces in its agricultural sector for providing sufficient feeding to an increasing population, while also having improper soil management. Based on field visits, interviews, regular meetings, training workshops, and joint analysis it was revealed that farmers used both organic (bio-slurry) and inorganic fertilisers but were unaware of the balance needed and required doses of fertiliser. Further, it appeared that farmers have limited access to improve crop management practices, specifically to fertiliser management. In a response to the problem, the current weaknesses, and further scope of improvement of present organisational setup of slurry extension component of NBP and subsidy system have been analysed in depth. Extensive recommendations are offered on an organisational setup level (e.g. strengthen the linkage between Provincial Biogas Program Office-PBPO and Cambodian Centre for Study and Development in Agriculture-CEDAC by involving CEDAC in the planning process), subsidy (e.g. provide subsidy to attract farmers for construction of standard compost hut, boundaries and shade), planning (e.g. bottom up planning approach is suggested where a seasonal planning meeting should be organized at province by the project director involving CEDAC provincial coordinator), development of training materials (e.g. a national consultant should be hired for developing a training manual on bio-slurry systems), training (e.g. strengthen user training by increasing its number, frequency, topics), farmers participatory action research (e.g. the participatory approach should be replaced by a demonstration one), monitoring and reporting (e.g. monitoring system should be established as desk and field monitoring)

  7. A probabilistic model for component-based shape synthesis

    KAUST Repository

    Kalogerakis, Evangelos; Chaudhuri, Siddhartha; Koller, Daphne; Koltun, Vladlen

    2012-01-01

    represents probabilistic relationships between properties of shape components, and relates them to learned underlying causes of structural variability within the domain. These causes are treated as latent variables, leading to a compact representation

  8. Application of risk-based methods for inspection of nuclear power plant components

    International Nuclear Information System (INIS)

    Balkey, K.R.

    1992-01-01

    In-service inspections (ISIs) can play a significant role in minimizing equipment and structural failures. All aspects of inspections, i.e., objectives, method, timing, and the acceptance criteria for detected flaws can affect the probability of component failure. Where ISI programs exist, they are primarily based on prior experience and engineering judgment. At best, some include an implicit consideration of risk (probability of failure multiplied by consequence). Since late 1988, a multidisciplined American Society of Mechanical Engineers (ASME) Research Task Force on Risk-Based Inspection Guidelines has been addressing the general question of how to formally incorporate risk considerations into plans and requirements for the ISI of components and structural systems. The task force and steering committee that guided the project have concluded that appropriate analytical methods exist for evaluating and quantifying risks associated with pressure boundary and structural failures. With the support of about a dozen industry and government organizations, the research group has recommended a general methodology for establishing a risk-based inspection program that could be applied to any nuclear system or structural system

  9. Nuclear Plant Aging Research (NPAR) program plan: Components, systems, and structures

    International Nuclear Information System (INIS)

    1987-09-01

    The nuclear plant aging research described in this plan is intended to resolve issues related to the aging and service wear of equipment and systems and major components at commercial reactor facilities and their possible impact on plant safety. Emphasis has been placed on identification and characterization of the mechanisms of material and component degradation during service and evaluation of methods of inspection, surveillance, condition monitoring, and maintenance as means of mitigating such effects. Specifically, the goals of the program are as follows: (1) to identify and characterize aging and service wear effects which, if unchecked, could cause degradation of equipment, a systems, and major components and thereby impair plant safety; (2) to identify methods of inspection, surveillance, and monitoring, or of evaluating residual life of equipment, systems, and major components, which will ensure timely detection of significant aging effects prior to loss of safety function; and (3) to evaluate the effectiveness of storage, maintenance, repair, and replacement practices in mitigating the rate and extent of degradation caused by aging and service wear

  10. Perceived helpfulness of the individual components of a behavioural weight loss program: results from the Hopkins POWER Trial

    OpenAIRE

    Dalcin, A. T.; Jerome, G. J.; Fitzpatrick, S. L.; Louis, T. A.; Wang, N?Y.; Bennett, W. L.; Durkin, N.; Clark, J. M.; Daumit, G. L.; Appel, L. J.; Coughlin, J. W.

    2015-01-01

    Summary Background Behavioural weight loss programs are effective first?line treatments for obesity and are recommended by the US Preventive Services Task Force. Gaining an understanding of intervention components that are found helpful by different demographic groups can improve tailoring of weight loss programs. This paper examined the perceived helpfulness of different weight loss program components. Methods Participants (n?=?236) from the active intervention conditions of the Practice?bas...

  11. A combined Component-Based Approach for the Design of Distributed Software Systems

    NARCIS (Netherlands)

    Guareis de farias, Cléver; Ferreira Pires, Luis; van Sinderen, Marten J.; Quartel, Dick; Yang, H.; Gupta, S.

    2001-01-01

    Component-based software development enables the construction of software artefacts by assembling binary units of production, distribution and deployment, the so-called components. Several approaches to component-based development have been proposed recently. Most of these approaches are based on

  12. Effectiveness of a Multi-Component Intervention for Overweight and Obese Children (Nereu Program: A Randomized Controlled Trial.

    Directory of Open Access Journals (Sweden)

    Noemi Serra-Paya

    Full Text Available Treatment of childhood obesity is a complex challenge for primary health care professionals.To evaluate the effectiveness of the Nereu Program in improving anthropometric parameters, physical activity and sedentary behaviours, and dietary intake.Randomized, controlled, multicentre clinical trial comparing Nereu Program and usual counselling group interventions in primary care settings. The 8-month study recruited 113 children aged 6 to 12 years with overweight/obesity. Before recruitment, eligible participants were randomly allocated to an intensive, family-based multi-component behavioural intervention (Nereu Program group or usual advice from their paediatrician on healthy eating and physical activity. Anthropometric parameters, objectively measured sedentary and physical activity behaviours, and dietary intake were evaluated pre- and post-intervention.At the end of the study period, both groups achieved a similar decrease in body mass index (BMIsd compared to baseline. Nereu Program participants (n = 54 showed greater increases in moderate-intense physical activity (+6.27% vs. -0.61%, p<0.001 and daily fruit servings (+0.62 vs. +0.13, p<0.026, and decreased daily soft drinks consumption (-0.26 vs. -0.02, p<0.047, respectively, compared to the counselling group (n = 59.At the end of the 8-month intervention, participants in the Nereu Program group showed improvement in physical activity and dietary behaviours, compared to the counselling group.ClinicalTrials.gov NCT01878994.

  13. Algorithms and programs of dynamic mixture estimation unified approach to different types of components

    CERN Document Server

    Nagy, Ivan

    2017-01-01

    This book provides a general theoretical background for constructing the recursive Bayesian estimation algorithms for mixture models. It collects the recursive algorithms for estimating dynamic mixtures of various distributions and brings them in the unified form, providing a scheme for constructing the estimation algorithm for a mixture of components modeled by distributions with reproducible statistics. It offers the recursive estimation of dynamic mixtures, which are free of iterative processes and close to analytical solutions as much as possible. In addition, these methods can be used online and simultaneously perform learning, which improves their efficiency during estimation. The book includes detailed program codes for solving the presented theoretical tasks. Codes are implemented in the open source platform for engineering computations. The program codes given serve to illustrate the theory and demonstrate the work of the included algorithms.

  14. The Feed Materials Program of the Manhattan Project: A Foundational Component of the Nuclear Weapons Complex

    Science.gov (United States)

    Reed, B. Cameron

    2014-12-01

    The feed materials program of the Manhattan Project was responsible for procuring uranium-bearing ores and materials and processing them into forms suitable for use as source materials for the Project's uranium-enrichment factories and plutonium-producing reactors. This aspect of the Manhattan Project has tended to be overlooked in comparison with the Project's more dramatic accomplishments, but was absolutely vital to the success of those endeavors: without appropriate raw materials and the means to process them, nuclear weapons and much of the subsequent cold war would never have come to pass. Drawing from information available in Manhattan Engineer District Documents, this paper examines the sources and processing of uranium-bearing materials used in making the first nuclear weapons and how the feed materials program became a central foundational component of the postwar nuclear weapons complex.

  15. Development of the disposal technology research component of the national uranium tailings program

    International Nuclear Information System (INIS)

    Melis, L.A.

    1983-03-01

    The National Technical Planning Group on Uranium Tailings Research, organized by CANMET in 1980, recommended the establishment of a National Uranium Tailings Program to develop research on the long-term abandonment of uranium mine tailings. This report deals with the disposal technology component of this program and attempts to provide recommendations with respect to potential research avenues in this area. A description of uranium tailings in Canada is provided in order to identify the current situation with uranium tailings management. Uranium mining sites described include the Elliot Lake and Bancroft area of Ontario, the northern Saskatchewan properties and the two abandoned sites in the North West Territories. The description of the sites was facilitated by subdividing the tailings into inactive sites, active sites, new tailings sites and areas of tailings in a close-out situation. Methods identified as promising include subsurface disposal, in-situ leaching, prevention of pyrite oxidation and reclamation studies at abandoned sites

  16. Opportunity-based block replacement: the single component case

    NARCIS (Netherlands)

    R. Dekker (Rommert); E. Smeitink

    1991-01-01

    textabstractIn this paper we consider a block replacement model in which a component can be replaced preventively at maintenance opportunities only. Maintenance opportunities occur randomly and are modelled through a renewal process. In the first, theoretical part of the paper we derive an

  17. Component Architectures and Web-Based Learning Environments

    Science.gov (United States)

    Ferdig, Richard E.; Mishra, Punya; Zhao, Yong

    2004-01-01

    The Web has caught the attention of many educators as an efficient communication medium and content delivery system. But we feel there is another aspect of the Web that has not been given the attention it deserves. We call this aspect of the Web its "component architecture." Briefly it means that on the Web one can develop very complex…

  18. Community-Based Native Teacher Education Programs.

    Science.gov (United States)

    Heimbecker, Connie; Minner, Sam; Prater, Greg

    This paper describes two exemplary school-based Native teacher education programs offered by Northern Arizona University (NAU) to serve Navajo students and by Lakehead University (Ontario) to serve members of the Nishnabe Nation of northern Ontario. The Reaching American Indian Special/Elementary Educators (RAISE) program is located in Kayenta,…

  19. School-Based First Aid Training Programs: A Systematic Review.

    Science.gov (United States)

    Reveruzzi, Bianca; Buckley, Lisa; Sheehan, Mary

    2016-04-01

    This review examines the breadth of first aid training delivered to school students and the components that are age appropriate to adolescents. Eligible studies included school-based first aid interventions targeting students aged between 10 and 18 years. Online databases were searched, for peer-reviewed publications available as at August 2014. A total of 20 journal articles were relevant to the review. Research supported programs with longer durations (3 hours or more). Most programs taught resuscitation alone and few included content that was context-specific and relevant to the target group. The training experience of the facilitator did not appear to impact on student outcomes. Incorporating both practical and didactic components was found to be an important factor in delivering material and facilitating the retention of knowledge. Educational resources and facilitator training were found to be common features of effective programs. The review supports first aid in school curriculum and provides details of key components pertinent to design of school-based first aid programs. The findings suggest that first aid training may have benefits wider than the uptake and retention of knowledge and skills. There is a need for future research, particularly randomized controlled trials to aid in identifying best practice approaches. © 2016, American School Health Association.

  20. A two-component NZRI metamaterial based rectangular cloak

    Directory of Open Access Journals (Sweden)

    Sikder Sunbeam Islam

    2015-10-01

    Full Text Available A new two-component, near zero refractive index (NZRI metamaterial is presented for electromagnetic rectangular cloaking operation in the microwave range. In the basic design a pi-shaped, metamaterial was developed and its characteristics were investigated for the two major axes (x and z-axis wave propagation through the material. For the z-axis wave propagation, it shows more than 2 GHz bandwidth and for the x-axis wave propagation; it exhibits more than 1 GHz bandwidth of NZRI property. The metamaterial was then utilized in designing a rectangular cloak where a metal cylinder was cloaked perfectly in the C-band area of microwave regime. The experimental result was provided for the metamaterial and the cloak and these results were compared with the simulated results. This is a novel and promising design for its two-component NZRI characteristics and rectangular cloaking operation in the electromagnetic paradigm.

  1. Component Pin Recognition Using Algorithms Based on Machine Learning

    Science.gov (United States)

    Xiao, Yang; Hu, Hong; Liu, Ze; Xu, Jiangchang

    2018-04-01

    The purpose of machine vision for a plug-in machine is to improve the machine’s stability and accuracy, and recognition of the component pin is an important part of the vision. This paper focuses on component pin recognition using three different techniques. The first technique involves traditional image processing using the core algorithm for binary large object (BLOB) analysis. The second technique uses the histogram of oriented gradients (HOG), to experimentally compare the effect of the support vector machine (SVM) and the adaptive boosting machine (AdaBoost) learning meta-algorithm classifiers. The third technique is the use of an in-depth learning method known as convolution neural network (CNN), which involves identifying the pin by comparing a sample to its training. The main purpose of the research presented in this paper is to increase the knowledge of learning methods used in the plug-in machine industry in order to achieve better results.

  2. PyCatch: Component based hydrological catchment modelling

    NARCIS (Netherlands)

    Lana-Renault, N.; Karssenberg, D.J.

    2013-01-01

    Dynamic numerical models are powerful tools for representing and studying environmental processes through time. Usually they are constructed with environmental modelling languages, which are high-level programming languages that operate at the level of thinking of the scientists. In this paper we

  3. A Development Process for Enterprise Information Systems Based on Automatic Generation of the Components

    Directory of Open Access Journals (Sweden)

    Adrian ALEXANDRESCU

    2008-01-01

    Full Text Available This paper contains some ideas concerning the Enterprise Information Systems (EIS development. It combines known elements from the software engineering domain, with original elements, which the author has conceived and experimented. The author has followed two major objectives: to use a simple description for the concepts of an EIS, and to achieve a rapid and reliable EIS development process with minimal cost. The first goal was achieved defining some models, which describes the conceptual elements of the EIS domain: entities, events, actions, states and attribute-domain. The second goal is based on a predefined architectural model for the EIS, on predefined analyze and design models for the elements of the domain and finally on the automatic generation of the system components. The proposed methods do not depend on a special programming language or a data base management system. They are general and may be applied to any combination of such technologies.

  4. Learning Algorithms for Audio and Video Processing: Independent Component Analysis and Support Vector Machine Based Approaches

    National Research Council Canada - National Science Library

    Qi, Yuan

    2000-01-01

    In this thesis, we propose two new machine learning schemes, a subband-based Independent Component Analysis scheme and a hybrid Independent Component Analysis/Support Vector Machine scheme, and apply...

  5. A service component-based accounting and charging architecture to support interim mechanisms across multiple domains

    NARCIS (Netherlands)

    Le, M. van; Beijnum, B.J.F. van; Huitema, G.B.

    2004-01-01

    Today, telematics services are often compositions of different chargeable service components offered by different service providers. To enhance component-based accounting and charging, the service composition information is used to match with the corresponding charging structure of a service

  6. Identifying effective components of alcohol abuse prevention programs: effects of fear appeals, message style, and source expertise.

    Science.gov (United States)

    Stainback, R D; Rogers, R W

    1983-04-01

    Despite the importance of alcohol abuse prevention programs, the effectiveness of many components of these programs has not been demonstrated empirically. An experiment tested the efficacy of three components of many prevention programs: fear appeals, one- versus two-sided message style, and the expertise of the source. The persuasive impact of this information was examined on 113 ninth-grade students' intentions to abstain from drinking alcohol while they are teenagers. The results reveal that fear appeals are successful in strengthening students' intentions to refrain from drinking. Implications are discussed for implementing these principles and for designing future investigations of alcohol abuse prevention programs.

  7. Marketing for a Web-Based Master's Degree Program in Light of Marketing Mix Model

    Science.gov (United States)

    Pan, Cheng-Chang

    2012-01-01

    The marketing mix model was applied with a focus on Web media to re-strategize a Web-based Master's program in a southern state university in U.S. The program's existing marketing strategy was examined using the four components of the model: product, price, place, and promotion, in hopes to repackage the program (product) to prospective students…

  8. [PSYCHOEDUCATIONAL PROGRAM AS A WAY OF CORRECTING MOTIVATIONAL COMPONENTS IN PATIENTS WITH PARANOID SCHIZOPHRENIA WITH ABDOMINAL OBESITY].

    Science.gov (United States)

    Sinayko, V; Korovina, L

    2016-01-01

    The aim of the study was to investigate the influence of motivational and targeted psychoeducational programs designed for patients with paranoid schizophrenia with abdominal obesity. We observed 34 women aged 18-42 with continuous-flow type paranoid schizophrenia. All patients had a concomitant abdominal obesity, which developed secondarily after long-term administration of second generation antipsychotic medications (at least 1 year). Based on clinical-psychopathological and psychometric methods of assessment and on the analysis of Treatment Satisfaction Questionnaire we have developed modules for psychoeducational programs. Based on the results of the treatment we conclude that the application of psychoeducational programs is an effective component of complex treatment of patients with paranoid schizophrenia. Abdominal obesity should be regarded as an important and the main side effect of long-term therapy with atypical antipsychotic medications. It has a marked negative effect on subjective assessment of patients and decreases the level of their mental and social adaptation. This factor should be the basis for the formation of re-socialization and compliance-oriented actions.

  9. The Component Operational Experience Degradation and Ageing Program (CODAP). Review and lessons learned (2011-2014)

    International Nuclear Information System (INIS)

    Dragea, Tudor; Riznic, Jovica R.

    2015-01-01

    The structural integrity of piping systems is crucial to continuous and safe operation of nuclear power plants. Across all designs, the pressure boundary and its related piping and components, form one of the many levels of defense in the continuous and safe operation of a nuclear power plant. It is therefore necessary to identify, understand, evaluate and catalogue all of the various degradation mechanisms and failures that affect various piping systems and components across all nuclear power plants (NPP's). This need was first recognized in 1994 by the Swedish Nuclear Power Inspectorate (SKI) which launched a five-year Research and Development (R and D) project to explore the viability of creating an international pipe failure database (SKI-PIPE) (Riznic, 2007). The project was considered to be very successful and in 2002, the Organization for Economic Co-operation and Development (OECD) Pipe Failure Data Exchange (OPDE) was created. OPDE was operated under the umbrella of the OECD Nuclear Energy Agency (NEA) and was created in order to produce an international database on the piping service experience applicable to commercial nuclear power plants. After the successful completion of OPDE, the OECD, as well as other international members, agreed to participate in OPDE's successor: the Component Operational Experience Degradation and Ageing Program (CODAP). The objective of CODAP is to collect information on all possible events related to the failure and degradation of passive metallic components in NPP's. With CODAP winding down to the completion of its first phase in December 2014, this report will focus on the conclusions and the lessons learned throughout the many years of CODAP's implementation. There are currently 14 countries participating in CODAP, many of whom are industry leaders (France, Canada, U.S.A., Germany, Japan, Korea etc.). This cooperation on an international scale provides a library of OPerational EXperience (OPEX) for all participating NPP

  10. Component design challenges for the ground-based SP-100 nuclear assembly test

    International Nuclear Information System (INIS)

    Markley, R.A.; Disney, R.K.; Brown, G.B.

    1989-01-01

    The SP-100 ground engineering system (GES) program involves a ground test of the nuclear subsystems to demonstrate their design. The GES nuclear assembly test (NAT) will be performed in a simulated space environment within a vessel maintained at ultrahigh vacuum. The NAT employs a radiation shielding system that is comprised of both prototypical and nonprototypical shield subsystems to attenuate the reactor radiation leakage and also nonprototypical heat transport subsystems to remove the heat generated by the reactor. The reactor is cooled by liquid lithium, which will operate at temperatures prototypical of the flight system. In designing the components for these systems, a number of design challenges were encountered in meeting the operational requirements of the simulated space environment (and where necessary, prototypical requirements) while also accommodating the restrictions of a ground-based test facility with its limited available space. This paper presents a discussion of the design challenges associated with the radiation shield subsystem components and key components of the heat transport systems

  11. Component-Based Approach for Educating Students in Bioinformatics

    Science.gov (United States)

    Poe, D.; Venkatraman, N.; Hansen, C.; Singh, G.

    2009-01-01

    There is an increasing need for an effective method of teaching bioinformatics. Increased progress and availability of computer-based tools for educating students have led to the implementation of a computer-based system for teaching bioinformatics as described in this paper. Bioinformatics is a recent, hybrid field of study combining elements of…

  12. Component Data Base for Space Station Resistojet Auxiliary Propulsion

    Science.gov (United States)

    Bader, Clayton H.

    1988-01-01

    The resistojet was baselined for Space Station auxiliary propulsion because of its operational versatility, efficiency, and durability. This report was conceived as a guide to designers and planners of the Space Station auxiliary propulsion system. It is directed to the low thrust resistojet concept, though it should have application to other station concepts or systems such as the Environmental Control and Life Support System (ECLSS), Manufacturing and Technology Laboratory (MTL), and the Waste Fluid Management System (WFMS). The information will likely be quite useful in the same capacity for other non-Space Station systems including satellite, freeflyers, explorers, and maneuvering vehicles. The report is a catalog of the most useful information for the most significant feed system components and is organized for the greatest convenience of the user.

  13. Environmental risk assessment of biocidal products: identification of relevant components and reliability of a component-based mixture assessment.

    Science.gov (United States)

    Coors, Anja; Vollmar, Pia; Heim, Jennifer; Sacher, Frank; Kehrer, Anja

    2018-01-01

    Biocidal products are mixtures of one or more active substances (a.s.) and a broad range of formulation additives. There is regulatory guidance currently under development that will specify how the combined effects of the a.s. and any relevant formulation additives shall be considered in the environmental risk assessment of biocidal products. The default option is a component-based approach (CBA) by which the toxicity of the product is predicted from the toxicity of 'relevant' components using concentration addition. Hence, unequivocal and practicable criteria are required for identifying the 'relevant' components to ensure protectiveness of the CBA, while avoiding unnecessary workload resulting from including by default components that do not significantly contribute to the product toxicity. The present study evaluated a set of different criteria for identifying 'relevant' components using confidential information on the composition of 21 wood preservative products. Theoretical approaches were complemented by experimentally testing the aquatic toxicity of seven selected products. For three of the seven tested products, the toxicity was underestimated for the most sensitive endpoint (green algae) by more than factor 2 if only the a.s. were considered in the CBA. This illustrated the necessity of including at least some additives along with the a.s. Considering additives that were deemed 'relevant' by the tentatively established criteria reduced the underestimation of toxicity for two of the three products. A lack of data for one specific additive was identified as the most likely reason for the remaining toxicity underestimation of the third product. In three other products, toxicity was overestimated by more than factor 2, while prediction and observation fitted well for the seventh product. Considering all additives in the prediction increased only the degree of overestimation. Supported by theoretical calculations and experimental verifications, the present

  14. Heat source component development program. Report for July--December 1978

    International Nuclear Information System (INIS)

    Foster, E.L. Jr.

    1979-01-01

    This is the seventh of a series of reports describing the results of several analytical and experimental programs being conducted at Battelle-Columbus Laboratories to develop components for advanced radioisotope heat source applications. The heat sources will for the most part be used in advanced static and dynamic power conversion systems. Battelle's support of LASL during the current reporting period has been to determine the operational and reentry response of selected heat source trial designs, and their thermal response to a space shuttle solid propellant fire environment. Thermal, ablation, and thermal stress analyses were conducted using two-dimensional modeling techniques previously employed for the analysis of the earlier trial design versions, and modified in part to improve the modeling accuracy. Further modifications were made to improve the modeling accuracy as described herein. Thermal, ablation, and thermal stress analyses were then conducted for the trial design selected by LASL/DOE for more detailed studies using three-dimensional modeling techniques

  15. Core components of a comprehensive quality assurance program in anatomic pathology.

    Science.gov (United States)

    Nakhleh, Raouf E

    2009-11-01

    In this article the core components of a comprehensive quality assurance and improvement plan are outlined. Quality anatomic pathology work comes with focus on accurate, timely, and complete reports. A commitment to continuous quality improvement and a systems approach with a persistent effort helps to achieve this end. Departments should have a quality assurance and improvement plan that includes a risk assessment of real and potential problems facing the laboratory. The plan should also list the individuals responsible for carrying out the program with adequate resources, a defined timetable, and annual assessment for progress and future directions. Quality assurance monitors should address regulatory requirements and be organized by laboratory division (surgical pathology, cytology, etc) as well as 5 segments (preanalytic, analytic, postanalytic phases of the test cycle, turn-around-time, and customer satisfaction). Quality assurance data can also be used to evaluate individual pathologists using multiple parameters with peer group comparison.

  16. Critical components for diamond-based quantum coherent devices

    International Nuclear Information System (INIS)

    Greentree, Andrew D; Olivero, Paolo; Draganski, Martin; Trajkov, Elizabeth; Rabeau, James R; Reichart, Patrick; Gibson, Brant C; Rubanov, Sergey; Huntington, Shane T; Jamieson, David N; Prawer, Steven

    2006-01-01

    The necessary elements for practical devices exploiting quantum coherence in diamond materials are summarized, and progress towards their realization documented. A brief review of future prospects for diamond-based devices is also provided

  17. 78 FR 13895 - Certain Wireless Communications Base Stations and Components Thereof; Institution of...

    Science.gov (United States)

    2013-03-01

    ... the sale within the United States after importation of certain wireless communications base stations... United States after importation of certain wireless communications base stations and components thereof... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-871] Certain Wireless Communications Base...

  18. Heat source component development program. Quarterly report for April--June 1977

    Energy Technology Data Exchange (ETDEWEB)

    Foster, E.L. Jr. (comp.)

    1977-07-01

    This is the third in a series of quarterly reports describing the results of several experimental programs being conducted at Battelle-Columbus to develop components for advanced radioisotope heat source applications. The heat sources will for the most part be used in advanced static and dynamic power conversion systems. The specific component development efforts which are described include: improved selective and nonselective vents for helium release from the fuel containment; an improved reentry member and an improved impact member, singly and combined. The unitized reentry-impact member (RIM) is under development to be used as a bifunctional ablator. The development of a unitized reentry-impact member (RIM) has been stopped and the efforts are being redirected to the evaluation of materials that could be used in the near term for the module housing of the General Purpose Heat Source (GPHS). This redirection will be particularly felt in the selection of (improved) materials for reentry analysis and in the experimental evaluation of materials in impact tests. Finally thermochemical supporting studies are reported.

  19. WIPP/SRL in-situ tests: MIIT program--The effects of metal package components

    International Nuclear Information System (INIS)

    Covington, J.A.; Wicks, G.G.; Molecke, M.A.

    1991-01-01

    The Materials Interface Interactions Tests or MIIT is the largest in-situ testing program in progress, involving burial of many simulated nuclear waste systems and accompanying package components. In MIIT, waste glass samples were fabricated into the shape of 'pineapple slices', polished on one side. Proposed package components were also made into a similar configuration and the various glasses, metals, and geologic samples were than stacked onto heater elements within Teflon assemblies. This produced interactions of interest by creating glass/glass, glass/salt, and glass/metal interfaces. Since the outer diameter of the metal was smaller than the outer diameter of the glass, a lip was created which was also produced a glass/liquid interface, which was also studied. Overall, a total of 50 stacks or assemblies of pineapple slices were created in seven different stacking arrangements. Each individual assembly was then installed in an instrumented borehole at WIPP. Brine was then added to most of boreholes and the assemblies heated and maintained at 90 degrees C. This was achieved by energizing the central heating and rod that traversed through the middle opening of each of the pineapple slices in each assembly. Due to the design of these units, glass, metal and geologic samples could be removed at time intervals of 6 mos., 1 year, 2 years, and 5 years. Currently, all but the 5 year samples have been removed from test and are being evaluated in laboratories of MIIT participants

  20. Methodology of aging management in structures, systems and components of a nuclear power plant and its application to a pilot program in Laguna Verde

    International Nuclear Information System (INIS)

    Jarvio C, G.; Fernandez S, G.

    2009-10-01

    From its origin the nuclear power plants confront the effects of time and of environment, giving as result the aging of its structures, systems and components. In this document the general process is described for the establishment of Aging Management Program developed by IAEA. Following the program methodology is guaranteed that a nuclear power plant manages the aging effects appropriately and to make decisions for its solution, assuring the characteristic functions of structures, systems and components of same nuclear power plant. On the other hand, the implantation of an aging management program constitutes the base for development of a licence renovation program, like it can be the specific case of the Central Laguna Verde Units 1 and 2. (Author)

  1. 45 CFR 1306.33 - Home-based program option.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Home-based program option. 1306.33 Section 1306.33... PROGRAM HEAD START STAFFING REQUIREMENTS AND PROGRAM OPTIONS Head Start Program Options § 1306.33 Home-based program option. (a) Grantees implementing a home-based program option must: (1) Provide one home...

  2. Research program Integrity of Components (FKS). A substantial contribution to component safety; Forschungsvorhaben Komponentensicherheit (FKS). Ein wesentlicher Beitrag zur Komponentensicherheit

    Energy Technology Data Exchange (ETDEWEB)

    Kussmaul, K.; Roos, E.; Foehl, J.

    1998-11-01

    The main objectives pursued are: (a) verify the quality of reactor pressure vessels in existing LWR-type reactors, and (b) quantify the safety margin using both specified and non-specified materials and welds. On the basis of knowledge obtained through earlier programmes, the research project was to examine in particular deviations from the specified materials properties, for more exact quantification of the safety margin before RPV failure. There are three major factors influencing the component performance until failure, which are aggregate material fatigue, flaws, loading conditions, and the research work was to focus on the materials properties. An item of main interest was to assess the impact of long service life on the materials properties, assuming particularly unfavourable boundary conditions for materials properties and operational loads. (orig./CB) [Deutsch] Die Hauptziele des Forschungsvorhabens Komponentensicherheit waren (a) die Qualitaet bestehender Reaktordruckbehaelter von Leichtwasserreaktoren zu verifizieren, und (b) den Sicherheitsabstand zu quantifizieren unter Verwendung von Werkstoffen und Schweissverbindungen, die innerhalb und ausserhalb der Spezifikation liegen. Gestuetzt auf Erkenntnisse aus frueheren Programmen sollten zur quantitativen Erfassung des Sicherheitsabstandes gegen Versagen des RDB`s insbesondere auch Abweichungen vom spezifikationsgemaessen Werkstoffzustand betrachtet werden. Von den drei Haupteinflussgroessen Werkstoffzustand, Fehlerzustand, Beanspruchungszustand, die das Versagensverhalten bestimmen, lag der Schwerpunkt des FKS auf der Untersuchung des Werkstoffeinflusses. Insbesondere sollte geprueft werden, wie sich der Langzeitbetrieb auf die Aenderung der Werkstoffeigenschaften auswirkt, wenn besonders unguenstige Randbedingungen von Werkstoffzustand und Betriebsbedingungen zugrunde gelegt werden. (orig./MM)

  3. Base Program on Energy Related Research

    Energy Technology Data Exchange (ETDEWEB)

    Western Research Institute

    2008-06-30

    The main objective of the Base Research Program was to conduct both fundamental and applied research that will assist industry in developing, deploying, and commercializing efficient, nonpolluting fossil energy technologies that can compete effectively in meeting the energy requirements of the Nation. In that regard, tasks proposed under the WRI research areas were aligned with DOE objectives of secure and reliable energy; clean power generation; development of hydrogen resources; energy efficiency and development of innovative fuels from low and no-cost sources. The goal of the Base Research Program was to develop innovative technology solutions that will: (1) Increase the production of United States energy resources--coal, natural gas, oil, and renewable energy resources; (2) Enhance the competitiveness of United States energy technologies in international markets and assist in technology transfer; (3) Reduce the nation's dependence on foreign energy supplies and strengthen both the United States and regional economies; and (4) Minimize environmental impacts of energy production and utilization. This report summarizes the accomplishments of the overall Base Program. This document represents a stand-alone Final Report for the entire Program. It should be noted that an interim report describing the Program achievements was prepared in 2003 covering the progress made under various tasks completed during the first five years of this Program.

  4. Component fragility data base for reliability and probability studies

    International Nuclear Information System (INIS)

    Bandyopadhyay, K.; Hofmayer, C.; Kassier, M.; Pepper, S.

    1989-01-01

    Safety-related equipment in a nuclear plant plays a vital role in its proper operation and control, and failure of such equipment due to an earthquake may pose a risk to the safe operation of the plant. Therefore, in order to assess the overall reliability of a plant, the reliability of performance of the equipment should be studied first. The success of a reliability or a probability study depends to a great extent on the data base. To meet this demand, Brookhaven National Laboratory (BNL) has formed a test data base relating the seismic capacity of equipment specimens to the earthquake levels. Subsequently, the test data have been analyzed for use in reliability and probability studies. This paper describes the data base and discusses the analysis methods. The final results that can be directly used in plant reliability and probability studies are also presented in this paper

  5. GENERIC, COMPONENT FAILURE DATA BASE FOR LIGHT WATER AND LIQUID SODIUM REACTOR PRAs

    Energy Technology Data Exchange (ETDEWEB)

    S. A. Eide; S. V. Chmielewski; T. D. Swantz

    1990-02-01

    A comprehensive generic component failure data base has been developed for light water and liquid sodium reactor probabilistic risk assessments (PRAs) . The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) and the Centralized Reliability Data Organization (CREDO) data bases were used to generate component failure rates . Using this approach, most of the failure rates are based on actual plant data rather than existing estimates .

  6. EEG-Based Emotion Recognition Using Deep Learning Network with Principal Component Based Covariate Shift Adaptation

    Directory of Open Access Journals (Sweden)

    Suwicha Jirayucharoensak

    2014-01-01

    Full Text Available Automatic emotion recognition is one of the most challenging tasks. To detect emotion from nonstationary EEG signals, a sophisticated learning algorithm that can represent high-level abstraction is required. This study proposes the utilization of a deep learning network (DLN to discover unknown feature correlation between input signals that is crucial for the learning task. The DLN is implemented with a stacked autoencoder (SAE using hierarchical feature learning approach. Input features of the network are power spectral densities of 32-channel EEG signals from 32 subjects. To alleviate overfitting problem, principal component analysis (PCA is applied to extract the most important components of initial input features. Furthermore, covariate shift adaptation of the principal components is implemented to minimize the nonstationary effect of EEG signals. Experimental results show that the DLN is capable of classifying three different levels of valence and arousal with accuracy of 49.52% and 46.03%, respectively. Principal component based covariate shift adaptation enhances the respective classification accuracy by 5.55% and 6.53%. Moreover, DLN provides better performance compared to SVM and naive Bayes classifiers.

  7. At-Risk Programs for Middle School and High School: Essential Components and Recommendations for Administrators and Teachers.

    Science.gov (United States)

    Bateman, Susan; Karr-Kidwell, PJ

    This paper provides an extensive literature review concerning at-risk students and their needs, identifies the essential components necessary for effective at-risk programming, and describes successful at-risk programs and recommendations for administrators and teachers at the middle- and high-school levels. The literature review presents research…

  8. The Importance and Implementation of Eight Components of College and Career Readiness Counseling in School Counselor Education Programs

    Science.gov (United States)

    Perusse, Rachelle; Poynton, Timothy A.; Parzych, Jennifer L.; Goodnough, Gary E.

    2015-01-01

    School counselor education program administrators (N = 131) responded to an online questionnaire where the importance and extent of implementation of The College Board's National Office of School Counselor Advocacy (NOSCA) Eight Components of College and Career Readiness in their school counselor education program were assessed. The mean…

  9. Topics in Semantics-based Program Manipulation

    DEFF Research Database (Denmark)

    Grobauer, Bernt

    four articles in the field of semantics-based techniques for program manipulation: three articles are about partial evaluation, a method for program specialization; the fourth article treats an approach to automatic cost analysis. Partial evaluation optimizes programs by specializing them with respect...... article in this dissertation describes how the second Futamura projection can be achieved for type-directed partial evaluation (TDPE), a relatively recent approach to partial evaluation: We derive an ML implementation of the second Futamura projection for TDPE. Due to the differences between ‘traditional...... denotational semantics—allows us to relate various possible semantics to each other both conceptually and formally. We thus are able to explain goal-directed evaluation using an intuitive list-based semantics, while using a continuation semantics for semantics-based compilation through partial evaluation...

  10. Assessing a Faculty Development Program for the Adoption of Brain-Based Learning Strategies

    Science.gov (United States)

    Lavis, Catherine C.; Williams, Kimberly A.; Fallin, Jana; Barnes, Pamela K.; Fishback, Sarah J.; Thien, Stephen

    2016-01-01

    Kansas State University designed a 20-month faculty development program with the goal of fostering broad, institution-wide adoption of teaching practices that focus on brain-based learning. Components of the program included annual teaching and learning workshops, reading and discussion groups based on content of a book about how the brain learns…

  11. Modeling media as latent semantics based on cognitive components

    DEFF Research Database (Denmark)

    Petersen, Michael Kai

    as distinct states in the continuous ebb and flow of emotions underlying consciousness. Whether it being a soundscape of structured peaks or tiny black characters lined up across a page, we rely on syntax for parsing sequences of symbols, which based on hierarchically nested structures allow us to express...

  12. Selection of independent components based on cortical mapping of electromagnetic activity

    Science.gov (United States)

    Chan, Hui-Ling; Chen, Yong-Sheng; Chen, Li-Fen

    2012-10-01

    Independent component analysis (ICA) has been widely used to attenuate interference caused by noise components from the electromagnetic recordings of brain activity. However, the scalp topographies and associated temporal waveforms provided by ICA may be insufficient to distinguish functional components from artifactual ones. In this work, we proposed two component selection methods, both of which first estimate the cortical distribution of the brain activity for each component, and then determine the functional components based on the parcellation of brain activity mapped onto the cortical surface. Among all independent components, the first method can identify the dominant components, which have strong activity in the selected dominant brain regions, whereas the second method can identify those inter-regional associating components, which have similar component spectra between a pair of regions. For a targeted region, its component spectrum enumerates the amplitudes of its parceled brain activity across all components. The selected functional components can be remixed to reconstruct the focused electromagnetic signals for further analysis, such as source estimation. Moreover, the inter-regional associating components can be used to estimate the functional brain network. The accuracy of the cortical activation estimation was evaluated on the data from simulation studies, whereas the usefulness and feasibility of the component selection methods were demonstrated on the magnetoencephalography data recorded from a gender discrimination study.

  13. FY1995 study of very flexible software structures based on soft-software components; 1995 nendo yawarankana software buhin ni motozuku software no choju kozo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The purpose of this study is to develop the method and tools for changing the software structure flexibly along with the continuous continuous change of its environment and conditions of use. The goal is the software of very high adaptability by using soft-software components and flexible assembly. The CASE tool platform Sapid based on a fine-grained repository was developed and enforced for raising the abstraction level of program code and for mining potential flexible components. To reconstruct the software adaptable to a required environment, the SQM (Software Quark Model) was used in managing interconnectivity and other semantic relationships of among components. On these two basic systems, we developed various methods and tools such as those for static and dynamic analysis of very flexible software structures, program transformation description, program pattern extraction and composition component optimization by partial evaluation, component extraction by function slicing, code encapsulation, and component navigation and application. (NEDO)

  14. Are All Program Elements Created Equal? Relations Between Specific Social and Emotional Learning Components and Teacher-Student Classroom Interaction Quality.

    Science.gov (United States)

    Abry, Tashia; Rimm-Kaufman, Sara E; Curby, Timothy W

    2017-02-01

    School-based social and emotional learning (SEL) programs are presented to educators with little understanding of the program components that have the greatest leverage for improving targeted outcomes. Conducted in the context of a randomized controlled trial, the present study used variation in treatment teachers' (N = 143) implementation of four core components of the Responsive Classroom approach to examine relations between each component and the quality of teachers' emotional, organizational, and instructional interactions in third, fourth, and fifth grade classrooms (controlling for pre-intervention interaction quality and other covariates). We also examined the extent to which these relations varied as a function of teachers' baseline levels of interaction quality. Indices of teachers' implementation of Morning Meeting, Rule Creation, Interactive Modeling, and Academic Choice were derived from a combination of teacher-reported surveys and classroom observations. Ratings of teacher-student classroom interactions were aggregated across five observations conducted throughout the school year. Structural path models indicated that teachers' use of Morning Meeting and Academic Choice related to higher levels of emotionally supportive interactions; Academic Choice also related to higher levels of instructional interactions. In addition, teachers' baseline interaction quality moderated several associations such that the strongest relations between RC component use and interaction quality emerged for teachers with the lowest baseline interaction quality. Results highlight the value of examining individual program components toward the identification of program active ingredients that can inform intervention optimization and teacher professional development.

  15. Knowledge Based Components of Expertise in Medical Diagnosis.

    Science.gov (United States)

    1981-09-01

    the ability to ac- cess and use knowledge that one "has" is situationally dependent (e.g., Melton, 1963)1 Tulving and Pearlstone , 1966). For example...Londons Wiley, 1976. Tulving , E., & Pearlstone , E. Availability versus accessibility of information in memory for words. Journal of Verbal Learning...encounter (c.f.Flexser’and Tulving , 19781 Tulving ., 1976). Expert-based instructional devices (computer assisted instruction or decision support sys

  16. Radiation induced defect flux behaviors at zirconium based component

    International Nuclear Information System (INIS)

    Choi, Sang Il; Kim, Ji Hyun; Kwon, Jun Hyun; Lee, Gyeong Geun

    2013-01-01

    In commercial reactor core, structure materials are located in high temperature and high pressure environment. Therefore, main concern of structure materials is corrosion and mechanical properties change than radiation effects on materials. However, radiation effects on materials become more important phenomena because research reactor condition is different from commercial reactor. The temperature is lower than 100 .deg. C and radiation dose is much higher than that of commercial reactor. Among the radiation effect on zirconium based metal, radiation induced growth (RIG), known as volume conservative distortion, is one of the most important phenomena. Recently, theoretical RIG modeling based on radiation damage theory (RDT) and balance equation are developed. However, these growth modeling have limited framework of single crystal and high temperature. To model theoretical RIG in research reactor, qualitative mechanism must be set up. Therefore, this paper intent is establishing defect flux mechanism of zirconium base metal in research reactor for RIG modeling. After than theoretical RIG work will be expanded to research reactor condition

  17. Structured behavioral observation techniques as components of an effective fitness-for-duty program

    International Nuclear Information System (INIS)

    Hauth, J.T.; Barnes, V.E.; Moore, C.J.; Toquam, J.L.

    1989-01-01

    Performance-based tests are designed to evaluate physical and cognitive performance and have several attractive features that may be useful in nuclear power plant fitness-for-duty programs. Three types of performance-based testing that may eventually be useful in the nuclear power industry are reviewed in this paper: (a) the Los Angeles Police Department's Drug Recognition Expert program, (b) performance assessment batteries, and (c) performance assessment devices. Each of these techniques is evaluated here in terms of the following measures of effectiveness: (1) scope, or the range of potential problems that can be detected; (2) reliability, or the consistency of results; (3) sensitivity, or the ability of the test to detect impairment or the presence of drugs at low levels; (4) specificity, or the ability of the test to correctly identify the source of impairment or the drug present; (5) implementation, or the practicality of using the technique in the nuclear power plant setting. This information analyzed in this paper indicates that although performance and cognitive assessment techniques currently lack the reliability, sensitivity, and specificity of random chemical screening to detect and deter substance abuse, they can address a variety of fitness-for-duty concerns that may not be adequately addressed by a urinalysis testing program alone. These include detection of drug use not detected by urinalysis, psychological stress, or physical injury or illness

  18. Research: Detailed and Selective Follow-up of Students for Improvement of Programs/Program Components in Business & Office Education and Marketing & Distributive Education. Final Report.

    Science.gov (United States)

    Scott, Gary D.; Chapman, Alberta

    The Kentucky student follow-up system was studied to identify the current status of follow-up activities in business and office education and marketing and distributive education; to identify the impact of follow-up data on these programs; to identify program components for which detailed follow-up can provide information to assist in program…

  19. Nuclear reactor component populations, reliability data bases, and their relationship to failure rate estimation and uncertainty analysis

    International Nuclear Information System (INIS)

    Martz, H.F.; Beckman, R.J.

    1981-12-01

    Probabilistic risk analyses are used to assess the risks inherent in the operation of existing and proposed nuclear power reactors. In performing such risk analyses the failure rates of various components which are used in a variety of reactor systems must be estimated. These failure rate estimates serve as input to fault trees and event trees used in the analyses. Component failure rate estimation is often based on relevant field failure data from different reliability data sources such as LERs, NPRDS, and the In-Plant Data Program. Various statistical data analysis and estimation methods have been proposed over the years to provide the required estimates of the component failure rates. This report discusses the basis and extent to which statistical methods can be used to obtain component failure rate estimates. The report is expository in nature and focuses on the general philosophical basis for such statistical methods. Various terms and concepts are defined and illustrated by means of numerous simple examples

  20. Integrated Data Base Program: a status report

    International Nuclear Information System (INIS)

    Notz, K.J.; Klein, J.A.

    1984-06-01

    The Integrated Data Base (IDB) Program provides official Department of Energy (DOE) data on spent fuel and radioactive waste inventories, projections, and characteristics. The accomplishments of FY 1983 are summarized for three broad areas: (1) upgrading and issuing of the annual report on spent fuel and radioactive waste inventories, projections, and characteristics, including ORIGEN2 applications and a quality assurance plan; (2) creation of a summary data file in user-friendly format for use on a personal computer and enhancing user access to program data; and (3) optimizing and documentation of the data handling methodology used by the IDB Program and providing direct support to other DOE programs and sites in data handling. Plans for future work in these three areas are outlined. 23 references, 11 figures

  1. Technical program to study the benefits of nonlinear analysis methods in LWR component designs. Technical report TR-3723-1

    International Nuclear Information System (INIS)

    Raju, P.P.

    1980-05-01

    This report summarizes the results of the study program to assess the benefits of nonlinear analysis methods in Light Water Reactor (LWR) component designs. The current study reveals that despite its increased cost and other complexities, nonlinear analysis is a practical and valuable tool for the design of LWR components, especially under ASME Level D service conditions (faulted conditions) and it will greatly assist in the evaluation of ductile fracture potential of pressure boundary components. Since the nonlinear behavior is generally a local phenomenon, the design of complex components can be accomplished through substructuring isolated localized regions and evaluating them in detail using nonlinear analysis methods

  2. Low-power adaptive filter based on RNS components

    DEFF Research Database (Denmark)

    Bernocchi, Gian Luca; Cardarilli, Gian Carlo; Del Re, Andrea

    2007-01-01

    In this paper a low-power implementation of an adaptive FIR filter is presented. The filter is designed to meet the constraints of channel equalization for fixed wireless communications that typically requires a large number of taps, but a serial updating of the filter coefficients, based...... on the least mean squares (LMS) algorithm, is allowed. Previous work showed that the use of the residue number system (RNS) for the variable FIR filter grants advantages both in area and power consumption. On the other hand, the use of a binary serial implementation of the adaptation algorithm eliminates...... the need for complex scaling circuits in RNS. The advantages in terms of area and speed of the presented filter, with respect to its two's complement counterpart, are evaluated for implementations in standard cells....

  3. High performance coated board inspection system based on commercial components

    CERN Document Server

    Barjaktarovic, M; Radunovic, J

    2007-01-01

    This paper presents a vision system for defect (fault) detection on a coated board developed using three industrial firewire cameras and a PC. Application for image processing and system control was realized with the LabView software package. Software for defect detection is based on a variation of the image segmentation algorithm. Standard steps in image segmentation are modified to match the characteristics of defects. Software optimization was accomplished using SIMD (Single Instruction Multiple Data) technology available in the Intel Pentium 4 processors that provided real time inspection capability. System provides benefits such as: improvement in production process, higher quality of delivered coated board and reduction of waste. This was proven during successful exploitation of the system for more than a year.

  4. Collaborative Communication in Work Based Learning Programs

    Science.gov (United States)

    Wagner, Stephen Allen

    2017-01-01

    This basic qualitative study, using interviews and document analysis, examined reflections from a Work Based Learning (WBL) program to understand how utilizing digital collaborative communication tools influence the educational experience. The Community of Inquiry (CoI) framework was used as a theoretical frame promoting the examination of the…

  5. School-Based Child Abuse Prevention Programs

    Science.gov (United States)

    Brassard, Marla R.; Fiorvanti, Christina M.

    2015-01-01

    Child abuse is a leading cause of emotional, behavioral, and health problems across the lifespan. It is also preventable. School-based abuse prevention programs for early childhood and elementary school children have been found to be effective in increasing student knowledge and protective behaviors. The purpose of this article is to help school…

  6. ITPI: Initial Transcription Process-Based Identification Method of Bioactive Components in Traditional Chinese Medicine Formula

    Directory of Open Access Journals (Sweden)

    Baixia Zhang

    2016-01-01

    Full Text Available Identification of bioactive components is an important area of research in traditional Chinese medicine (TCM formula. The reported identification methods only consider the interaction between the components and the target proteins, which is not sufficient to explain the influence of TCM on the gene expression. Here, we propose the Initial Transcription Process-based Identification (ITPI method for the discovery of bioactive components that influence transcription factors (TFs. In this method, genome-wide chip detection technology was used to identify differentially expressed genes (DEGs. The TFs of DEGs were derived from GeneCards. The components influencing the TFs were derived from STITCH. The bioactive components in the formula were identified by evaluating the molecular similarity between the components in formula and the components that influence the TF of DEGs. Using the formula of Tian-Zhu-San (TZS as an example, the reliability and limitation of ITPI were examined and 16 bioactive components that influence TFs were identified.

  7. Issues and approaches in risk-based aging analyses of passive components

    International Nuclear Information System (INIS)

    Uryasev, S.P.; Samanta, P.K.; Vesely, W.E.

    1994-01-01

    In previous NRC-sponsored work a general methodology was developed to quantify the risk contributions from aging components at nuclear plants. The methodology allowed Probabilistic Risk Analyses (PRAs) to be modified to incorporate the age-dependent component failure rates and also aging maintenance models to evaluate and prioritize the aging contributions from active components using the linear aging failure rate model and empirical components aging rates. In the present paper, this methodology is extended to passive components (for example, the pipes, heat exchangers, and the vessel). The analyses of passive components bring in issues different from active components. Here, we specifically focus on three aspects that need to be addressed in risk-based aging prioritization of passive components

  8. Mixed waste chemical compatibility: A testing program for plastic packaging components

    International Nuclear Information System (INIS)

    Nigrey, P.J.

    1995-01-01

    The purpose of hazardous and radioactive materials packaging is to enable these materials to be transported without posing a threat to the health or property of the general public. To achieve this aim, regulations in the United States have been written establishing general design requirements for such packagings. While no regulations have been written specifically for mixed waste packaging, regulations for the constituents of mixed wastes, i.e., hazardous and radioactive substances, have been codified by the US Department of Transportation (DOT, 49 CFR 173) and the US Nuclear Regulatory Commission (NRC, 10 CFR 71). The design requirements for both hazardous [49 CFR 173.24 (e)(1)] and radioactive [49 CFR 173.412 (g)] materials packaging specify packaging compatibility, i.e., that the materials of the packaging at sign d any contents be chemically compatible with each other. Furthermore, Type A [49 CFR 173.412 (g)] and Type B (10 CFR 71.43) packaging design requirements stipulate that there be no significant chemical, galvanic, or other reaction between the materials and contents of the package. Based on these requirements, a Chemical Compatibility Testing Program was developed in the Transportation Systems Department at Sandia National Laboratories (SNL). The program attempts to assure any regulatory body that the issue of packaging material compatibility towards hazardous and radioactive materials has been addressed. This program has been described in considerable detail in an internal SNL document, the Chemical Compatibility Test Plan ampersand Procedure Report (Nigrey 1993)

  9. Unifying Model-Based and Reactive Programming within a Model-Based Executive

    Science.gov (United States)

    Williams, Brian C.; Gupta, Vineet; Norvig, Peter (Technical Monitor)

    1999-01-01

    Real-time, model-based, deduction has recently emerged as a vital component in AI's tool box for developing highly autonomous reactive systems. Yet one of the current hurdles towards developing model-based reactive systems is the number of methods simultaneously employed, and their corresponding melange of programming and modeling languages. This paper offers an important step towards unification. We introduce RMPL, a rich modeling language that combines probabilistic, constraint-based modeling with reactive programming constructs, while offering a simple semantics in terms of hidden state Markov processes. We introduce probabilistic, hierarchical constraint automata (PHCA), which allow Markov processes to be expressed in a compact representation that preserves the modularity of RMPL programs. Finally, a model-based executive, called Reactive Burton is described that exploits this compact encoding to perform efficIent simulation, belief state update and control sequence generation.

  10. Calculations of atomic magnetic nuclear shielding constants based on the two-component normalized elimination of the small component method

    Science.gov (United States)

    Yoshizawa, Terutaka; Zou, Wenli; Cremer, Dieter

    2017-04-01

    A new method for calculating nuclear magnetic resonance shielding constants of relativistic atoms based on the two-component (2c), spin-orbit coupling including Dirac-exact NESC (Normalized Elimination of the Small Component) approach is developed where each term of the diamagnetic and paramagnetic contribution to the isotropic shielding constant σi s o is expressed in terms of analytical energy derivatives with regard to the magnetic field B and the nuclear magnetic moment 𝝁 . The picture change caused by renormalization of the wave function is correctly described. 2c-NESC/HF (Hartree-Fock) results for the σiso values of 13 atoms with a closed shell ground state reveal a deviation from 4c-DHF (Dirac-HF) values by 0.01%-0.76%. Since the 2-electron part is effectively calculated using a modified screened nuclear shielding approach, the calculation is efficient and based on a series of matrix manipulations scaling with (2M)3 (M: number of basis functions).

  11. Research on development model of nuclear component based on life cycle management

    International Nuclear Information System (INIS)

    Bao Shiyi; Zhou Yu; He Shuyan

    2005-01-01

    At present the development process of nuclear component, even nuclear component itself, is more and more supported by computer technology. This increasing utilization of the computer and software has led to the faster development of nuclear technology on one hand and also brought new problems on the other hand. Especially, the combination of hardware, software and humans has increased nuclear component system complexities to an unprecedented level. To solve this problem, Life Cycle Management technology is adopted in nuclear component system. Hence, an intensive discussion on the development process of a nuclear component is proposed. According to the characteristics of the nuclear component development, such as the complexities and strict safety requirements of the nuclear components, long-term design period, changeable design specifications and requirements, high capital investment, and satisfaction for engineering codes/standards, the development life-cycle model of nuclear component is presented. The development life-cycle model is classified at three levels, namely, component level development life-cycle, sub-component development life-cycle and component level verification/certification life-cycle. The purposes and outcomes of development processes are stated in detailed. A process framework for nuclear component based on system engineering and development environment of nuclear component is discussed for future research work. (authors)

  12. Analysis of appraisal tool of system security engineering capability maturity based on component

    International Nuclear Information System (INIS)

    Liu Zhenghai; Yang Xiaohua; Zou Shuliang; Liu Yachun; Xiao Jiantian; Liu Zhiming

    2012-01-01

    Spent Fuel Reprocessing is a part of nuclear fuel cycle and is the inevitably choice of nuclear power sustainable development. Reprocessing needs to face with radiological, criticality, chemical hazards. Besides using the tradition appraisal methods based on the security goals, it is a beneficial supplement that using the appraisal method of system security engineering capability maturity model based on the process. Experts should check and approve large numbers of documents during the appraisal based on system security engineering capability maturity model, so it is necessary that developing a tool to assist the expert to complete the appraisal. The method of developing software based on component is highly effective, nimble and reliable. Component technology is analyzed, the methods of extraction model domain components and general components is introduced, and the appraisal system is developed based on component technology. (authors)

  13. Motion Learning Based on Bayesian Program Learning

    Directory of Open Access Journals (Sweden)

    Cheng Meng-Zhen

    2017-01-01

    Full Text Available The concept of virtual human has been highly anticipated since the 1980s. By using computer technology, Human motion simulation could generate authentic visual effect, which could cheat human eyes visually. Bayesian Program Learning train one or few motion data, generate new motion data by decomposing and combining. And the generated motion will be more realistic and natural than the traditional one.In this paper, Motion learning based on Bayesian program learning allows us to quickly generate new motion data, reduce workload, improve work efficiency, reduce the cost of motion capture, and improve the reusability of data.

  14. The structural aging assessment program: ranking methodology for CANDU nuclear generating station concrete components

    International Nuclear Information System (INIS)

    Philipose, K.E.; Muhkerjee, P.K.; McColm, E.J.

    1997-01-01

    Most of the major structural components in CANDU nuclear generating stations are constructed of reinforced concrete. Although passive in nature, these structures perform many critical safety functions in the operation of each facility. Aging can affect the structural capacity and integrity of structures. The reduction in capacity due to aging is not addressed in design codes. Thus a program is warranted to monitor the aging of safety-related CANDU plant structures and to prioritize those that require maintenance and repairs. Prioritization of monitoring efforts is best accomplished by focusing on those structures judged to be the most critical to plant performance and safety. The safety significance of each sub-element and its degradation with time can be evaluated using a numerical rating system. This will simplify the utility's efforts, thereby saving maintenance costs while providing a higher degree of assurance that performance is maintained. This paper describes the development of a rating system (ranking procedure) as part of the Plant Life Management of CANDU generating station concrete structures and illustrates its application to an operating plant. (author)

  15. FAILPROB-A Computer Program to Compute the Probability of Failure of a Brittle Component; TOPICAL

    International Nuclear Information System (INIS)

    WELLMAN, GERALD W.

    2002-01-01

    FAILPROB is a computer program that applies the Weibull statistics characteristic of brittle failure of a material along with the stress field resulting from a finite element analysis to determine the probability of failure of a component. FAILPROB uses the statistical techniques for fast fracture prediction (but not the coding) from the N.A.S.A. - CARES/life ceramic reliability package. FAILPROB provides the analyst at Sandia with a more convenient tool than CARES/life because it is designed to behave in the tradition of structural analysis post-processing software such as ALGEBRA, in which the standard finite element database format EXODUS II is both read and written. This maintains compatibility with the entire SEACAS suite of post-processing software. A new technique to deal with the high local stresses computed for structures with singularities such as glass-to-metal seals and ceramic-to-metal braze joints is proposed and implemented. This technique provides failure probability computation that is insensitive to the finite element mesh employed in the underlying stress analysis. Included in this report are a brief discussion of the computational algorithms employed, user instructions, and example problems that both demonstrate the operation of FAILPROB and provide a starting point for verification and validation

  16. MS-SQL data base programming

    Energy Technology Data Exchange (ETDEWEB)

    Noh, Chang Bae; Kim, Nam Jung; Lee, Hyeong Gyo

    2002-07-15

    This is about MS-SQL data base programming which is divided into thirteen chapters. The contents of this book are to understand MS-SQL 2000 DBMS with its composition, new function and history of MS-SQL, to learn conception of data base, install, run and closing of MS-SQL 2000 DBMS, to deal with the basic of MS-SQL DBMS, to handle the intermediate level of MS-SQL DBMS, to deal with MS-SQL DBMS in advanced level, to practice query like changing data base and checking of data lists, function on its use and data diff, get date, date add, char, upper and system function, set-up of MS-SQL ODBC, constructing of web server of windows 2000, web programming using visual studio.net.making board and making reference room.

  17. MS-SQL data base programming

    International Nuclear Information System (INIS)

    Noh, Chang Bae; Kim, Nam Jung; Lee, Hyeong Gyo

    2002-07-01

    This is about MS-SQL data base programming which is divided into thirteen chapters. The contents of this book are to understand MS-SQL 2000 DBMS with its composition, new function and history of MS-SQL, to learn conception of data base, install, run and closing of MS-SQL 2000 DBMS, to deal with the basic of MS-SQL DBMS, to handle the intermediate level of MS-SQL DBMS, to deal with MS-SQL DBMS in advanced level, to practice query like changing data base and checking of data lists, function on its use and data diff, get date, date add, char, upper and system function, set-up of MS-SQL ODBC, constructing of web server of windows 2000, web programming using visual studio.net.making board and making reference room.

  18. Two efficient label-equivalence-based connected-component labeling algorithms for 3-D binary images.

    Science.gov (United States)

    He, Lifeng; Chao, Yuyan; Suzuki, Kenji

    2011-08-01

    Whenever one wants to distinguish, recognize, and/or measure objects (connected components) in binary images, labeling is required. This paper presents two efficient label-equivalence-based connected-component labeling algorithms for 3-D binary images. One is voxel based and the other is run based. For the voxel-based one, we present an efficient method of deciding the order for checking voxels in the mask. For the run-based one, instead of assigning each foreground voxel, we assign each run a provisional label. Moreover, we use run data to label foreground voxels without scanning any background voxel in the second scan. Experimental results have demonstrated that our voxel-based algorithm is efficient for 3-D binary images with complicated connected components, that our run-based one is efficient for those with simple connected components, and that both are much more efficient than conventional 3-D labeling algorithms.

  19. The right maintenance on the right components, at the right time, with the right parts: maintaining high plant reliability through an effective maintenance program

    International Nuclear Information System (INIS)

    Von Hatten, P.

    2008-01-01

    The objective of the maintenance program at a Nuclear Power Plant is to be proactive and prevent unexpected failures of equipment that can impact on Nuclear or Conventional Safety and Plant Production. This does not mean that all equipment failures will be prevented; in a number of cases the most cost effective solution is to allow equipment to run to failure. Deciding what components are critical to the plant is the first step. The industry uses guidance from INPO Advanced Process, AP913, to classify components as Critical, Non Critical or Run to Failure based on the consequence of the failure. Once this is complete, then the right maintenance program needs to be specified. This is done through utilization of experience from the industry based on the type of component. Maintenance strategies and templates have been produced for most power plant components. Each station or fleet needs then to apply the criteria, with exceptions as required, to determine the maintenance requirements and frequency for their components. This includes predictive and preventative maintenance. The more critical the component is the more rigorous the maintenance requirements. Once the maintenance program is defined it can be implemented. This requires that the Preventative Maintenance (PM's) are updated to ensure the correct tasks are in place and the frequency is correct. Work Management will group the PM's so they can scheduled efficiently and to minimize equipment down time. The last element is to ensure that the required parts are specified and are stocked or readily available for the maintenance when it is scheduled. This is an ongoing effort since components become obsolete or suppliers go out of business or change hands. (author)

  20. Community-based radon education programs

    International Nuclear Information System (INIS)

    Laquatra, J.

    1990-01-01

    This paper reports that in the United States, educational programs about radon gas have been developed and implemented by federal and state government entities and other organizations, including the Cooperative Extension Service and affiliated land grant universities. Approaches have included the production of brochures, pamphlets, workshops for targeted audiences, and consumer telephone hotlines. In a free market for radon mitigation products and services, these efforts can be appropriate for their credibility, lack of bias, and individualized approaches. The purpose of this paper is to report on an educational program about radon undertaken by Cornell Cooperative Extension, including county-based workshops targeted to homeowners, housing professionals, high school teachers, and others. An analysis of survey data from program participants forms the basis for a discussion of the effectiveness of the Cooperative Extension Service in reaching the public about this topic

  1. Feedback loops and temporal misalignment in component-based hydrologic modeling

    Science.gov (United States)

    Elag, Mostafa M.; Goodall, Jonathan L.; Castronova, Anthony M.

    2011-12-01

    In component-based modeling, a complex system is represented as a series of loosely integrated components with defined interfaces and data exchanges that allow the components to be coupled together through shared boundary conditions. Although the component-based paradigm is commonly used in software engineering, it has only recently been applied for modeling hydrologic and earth systems. As a result, research is needed to test and verify the applicability of the approach for modeling hydrologic systems. The objective of this work was therefore to investigate two aspects of using component-based software architecture for hydrologic modeling: (1) simulation of feedback loops between components that share a boundary condition and (2) data transfers between temporally misaligned model components. We investigated these topics using a simple case study where diffusion of mass is modeled across a water-sediment interface. We simulated the multimedia system using two model components, one for the water and one for the sediment, coupled using the Open Modeling Interface (OpenMI) standard. The results were compared with a more conventional numerical approach for solving the system where the domain is represented by a single multidimensional array. Results showed that the component-based approach was able to produce the same results obtained with the more conventional numerical approach. When the two components were temporally misaligned, we explored the use of different interpolation schemes to minimize mass balance error within the coupled system. The outcome of this work provides evidence that component-based modeling can be used to simulate complicated feedback loops between systems and guidance as to how different interpolation schemes minimize mass balance error introduced when components are temporally misaligned.

  2. Leveraging Existing Mission Tools in a Re-Usable, Component-Based Software Environment

    Science.gov (United States)

    Greene, Kevin; Grenander, Sven; Kurien, James; z,s (fshir. z[orttr); z,scer; O'Reilly, Taifun

    2006-01-01

    Emerging methods in component-based software development offer significant advantages but may seem incompatible with existing mission operations applications. In this paper we relate our positive experiences integrating existing mission applications into component-based tools we are delivering to three missions. In most operations environments, a number of software applications have been integrated together to form the mission operations software. In contrast, with component-based software development chunks of related functionality and data structures, referred to as components, can be individually delivered, integrated and re-used. With the advent of powerful tools for managing component-based development, complex software systems can potentially see significant benefits in ease of integration, testability and reusability from these techniques. These benefits motivate us to ask how component-based development techniques can be relevant in a mission operations environment, where there is significant investment in software tools that are not component-based and may not be written in languages for which component-based tools even exist. Trusted and complex software tools for sequencing, validation, navigation, and other vital functions cannot simply be re-written or abandoned in order to gain the advantages offered by emerging component-based software techniques. Thus some middle ground must be found. We have faced exactly this issue, and have found several solutions. Ensemble is an open platform for development, integration, and deployment of mission operations software that we are developing. Ensemble itself is an extension of an open source, component-based software development platform called Eclipse. Due to the advantages of component-based development, we have been able to vary rapidly develop mission operations tools for three surface missions by mixing and matching from a common set of mission operation components. We have also had to determine how to

  3. Professional Development Graduate Courses and a Masters of Arts in Physics Education with Web Based Course Components

    Science.gov (United States)

    Lindgren, Richard; Thornton, Stephen

    2010-02-01

    Professional development courses offered in physical/Earth science and physics by the Department of Physics are delivered by different venues to accommodate the needs of the K-12 teaching community. The majority of teachers take our courses off-site or through our distance-learning web-based program on the Internet for endorsement or recertification, but with a gradually increasing number enrolling in our 30 credit Masters of Arts in Physics Education degree (MAPE) program. The purpose of the Masters program is to provide increased physics content to those teachers who feel inadequately prepared to teach high school physics. The increase in numbers and success of this program is partly due to the convenience of taking online web-based courses which is made possible by using the latest communication technologies on the high speed internet. There is also a residential component of the MAPE program, which requires the candidates to earn 14 credits of calculus-based core physics in residence in the summer at the University. We have graduated a total of 91 teachers since the program began in 2000. )

  4. A testing program to evaluate the effects of simulant mixed wastes on plastic transportation packaging components

    International Nuclear Information System (INIS)

    Nigrey, P.J.; Dickens, T.G.

    1997-01-01

    Based on regulatory requirements for Type A and B radioactive material packaging, a Testing Program was developed to evaluate the effects of mixed wastes on plastic materials which could be used as liners and seals in transportation containers. The plastics evaluated in this program were butadiene-acrylonitrile copolymer (Nitrile rubber), cross-linked polyethylene, epichlorohydrin, ethylene-propylene rubber (EPDM), fluorocarbons, high-density polyethylene (HDPE), butyl rubber, polypropylene, polytetrafluoroethylene, and styrene-butadiene rubber (SBR). These plastics were first screened in four simulant mixed wastes. The liner materials were screened using specific gravity measurements and seal materials by vapor transport rate (VTR) measurements. For the screening of liner materials, Kel-F, HDPE, and XLPE were found to offer the greatest resistance to the combination of radiation and chemicals. The tests also indicated that while all seal materials passed exposure to the aqueous simulant mixed waste, EPDM and SBR had the lowest VTRs. In the chlorinated hydrocarbon simulant mixed waste, only Viton passed the screening tests. In both the simulant scintillation fluid mixed waste and the ketone mixture waste, none of the seal materials met the screening criteria. Those materials which passed the screening tests were subjected to further comprehensive testing in each of the simulant wastes. The materials were exposed to four different radiation doses followed by exposure to a simulant mixed waste at three temperatures and four different exposure times (7, 14, 28, 180 days). Materials were tested by measuring specific gravity, dimensional, hardness, stress cracking, VTR, compression set, and tensile properties. The second phase of this Testing Program involving the comprehensive testing of plastic liner has been completed and for seal materials is currently in progress

  5. Association test based on SNP set: logistic kernel machine based test vs. principal component analysis.

    Directory of Open Access Journals (Sweden)

    Yang Zhao

    Full Text Available GWAS has facilitated greatly the discovery of risk SNPs associated with complex diseases. Traditional methods analyze SNP individually and are limited by low power and reproducibility since correction for multiple comparisons is necessary. Several methods have been proposed based on grouping SNPs into SNP sets using biological knowledge and/or genomic features. In this article, we compare the linear kernel machine based test (LKM and principal components analysis based approach (PCA using simulated datasets under the scenarios of 0 to 3 causal SNPs, as well as simple and complex linkage disequilibrium (LD structures of the simulated regions. Our simulation study demonstrates that both LKM and PCA can control the type I error at the significance level of 0.05. If the causal SNP is in strong LD with the genotyped SNPs, both the PCA with a small number of principal components (PCs and the LKM with kernel of linear or identical-by-state function are valid tests. However, if the LD structure is complex, such as several LD blocks in the SNP set, or when the causal SNP is not in the LD block in which most of the genotyped SNPs reside, more PCs should be included to capture the information of the causal SNP. Simulation studies also demonstrate the ability of LKM and PCA to combine information from multiple causal SNPs and to provide increased power over individual SNP analysis. We also apply LKM and PCA to analyze two SNP sets extracted from an actual GWAS dataset on non-small cell lung cancer.

  6. Microservices as an Evolutionary Architecture of Component-Based Development: A Think-aloud Study

    OpenAIRE

    Parizi, Reza M.

    2018-01-01

    Microservices become a fast growing and popular architectural style based on service-oriented development. One of the major advantages using component-based approaches is to support reuse. In this paper, we present a study of microservices and how these systems are related to the traditional abstract models of component-based systems. This research focuses on the core properties of microservices including their scalability, availability and resilience, consistency, coupling and cohesion, and ...

  7. Repository-based software engineering program

    Science.gov (United States)

    Wilson, James

    1992-01-01

    The activities performed during September 1992 in support of Tasks 01 and 02 of the Repository-Based Software Engineering Program are outlined. The recommendations and implementation strategy defined at the September 9-10 meeting of the Reuse Acquisition Action Team (RAAT) are attached along with the viewgraphs and reference information presented at the Institute for Defense Analyses brief on legal and patent issues related to software reuse.

  8. Stacked Deck: An Effective, School-Based Program for the Prevention of Problem Gambling

    Science.gov (United States)

    Williams, Robert J.; Wood, Robert T.; Currie, Shawn R.

    2010-01-01

    School-based prevention programs are an important component of problem gambling prevention, but empirically effective programs are lacking. Stacked Deck is a set of 5-6 interactive lessons that teach about the history of gambling; the true odds and "house edge"; gambling fallacies; signs, risk factors, and causes of problem gambling; and…

  9. An ontology for component-based models of water resource systems

    Science.gov (United States)

    Elag, Mostafa; Goodall, Jonathan L.

    2013-08-01

    Component-based modeling is an approach for simulating water resource systems where a model is composed of a set of components, each with a defined modeling objective, interlinked through data exchanges. Component-based modeling frameworks are used within the hydrologic, atmospheric, and earth surface dynamics modeling communities. While these efforts have been advancing, it has become clear that the water resources modeling community in particular, and arguably the larger earth science modeling community as well, faces a challenge of fully and precisely defining the metadata for model components. The lack of a unified framework for model component metadata limits interoperability between modeling communities and the reuse of models across modeling frameworks due to ambiguity about the model and its capabilities. To address this need, we propose an ontology for water resources model components that describes core concepts and relationships using the Web Ontology Language (OWL). The ontology that we present, which is termed the Water Resources Component (WRC) ontology, is meant to serve as a starting point that can be refined over time through engagement by the larger community until a robust knowledge framework for water resource model components is achieved. This paper presents the methodology used to arrive at the WRC ontology, the WRC ontology itself, and examples of how the ontology can aid in component-based water resources modeling by (i) assisting in identifying relevant models, (ii) encouraging proper model coupling, and (iii) facilitating interoperability across earth science modeling frameworks.

  10. 45 CFR 1306.32 - Center-based program option.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Center-based program option. 1306.32 Section 1306... START PROGRAM HEAD START STAFFING REQUIREMENTS AND PROGRAM OPTIONS Head Start Program Options § 1306.32 Center-based program option. (a) Class size. (1) Head Start classes must be staffed by a teacher and an...

  11. Methods of Si based ceramic components volatilization control in a gas turbine engine

    Science.gov (United States)

    Garcia-Crespo, Andres Jose; Delvaux, John; Dion Ouellet, Noemie

    2016-09-06

    A method of controlling volatilization of silicon based components in a gas turbine engine includes measuring, estimating and/or predicting a variable related to operation of the gas turbine engine; correlating the variable to determine an amount of silicon to control volatilization of the silicon based components in the gas turbine engine; and injecting silicon into the gas turbine engine to control volatilization of the silicon based components. A gas turbine with a compressor, combustion system, turbine section and silicon injection system may be controlled by a controller that implements the control method.

  12. Hazardous Materials Pharmacies - A Vital Component of a Robust P2 Program

    International Nuclear Information System (INIS)

    McCarter, S.

    2006-01-01

    Integrating pollution prevention (P2) into the Department of Energy Integrated Safety Management (ISM) - Environmental Management System (EMS) approach, required by DOE Order 450.1, leads to an enhanced ISM program at large and complex installations and facilities. One of the building blocks to integrating P2 into a comprehensive environmental and safety program is the control and tracking of the amounts, types, and flow of hazardous materials used on a facility. Hazardous materials pharmacies (typically called HazMarts) provide a solid approach to resolving this issue through business practice changes that reduce use, avoid excess, and redistribute surplus. If understood from concept to implementation, the HazMart is a powerful tool for reducing pollution at the source, tracking inventory storage, controlling usage and flow, and summarizing data for reporting requirements. Pharmacy options can range from a strict, single control point for all hazardous materials to a virtual system, where the inventory is user controlled and reported over a common system. Designing and implementing HazMarts on large, diverse installations or facilities present a unique set of issues. This is especially true of research and development (R and D) facilities where the chemical use requirements are extensive and often classified. There are often multiple sources of supply; a wide variety of chemical requirements; a mix of containers ranging from small ampoules to large bulk storage tanks; and a wide range of tools used to track hazardous materials, ranging from simple purchase inventories to sophisticated tracking software. Computer systems are often not uniform in capacity, capability, or operating systems, making it difficult to use a server-based unified tracking system software. Each of these issues has a solution or set of solutions tied to fundamental business practices. Each requires an understanding of the problem at hand, which, in turn, requires good communication among all

  13. Perceived Benefits and Barriers of a Community-Based Diabetes Prevention and Management Program.

    Science.gov (United States)

    Shawley-Brzoska, Samantha; Misra, Ranjita

    2018-03-13

    This study examined the perceptions of benefits of and barriers to participating in a community-based diabetes program to improve program effectiveness. The Diabetes Prevention and Management (DPM) program was a twenty-two session, 1-year program, modeled after the evidence-based National Diabetes Prevention Program and AADE7 Self-Care Behaviors framework. Community-based participatory research approach was used to culturally tailor the curriculum. Participants included overweight or obese adults with dysglycemia. A benefits and barriers survey was developed to gather information on participants' perception of the program, as well as information on demographics and health literacy levels. Eighty-nine adults participated in the DPM program (73% females; 62% diabetic; 77% had adequate health literacy); 79% of participants completed the benefits and barriers survey. Principal component analysis indicated two components representing benefits (Cronbach's α = 0.83) and barriers (α = 0.65). The majority perceived high benefits and low barriers to program participation; benefits included helpful interaction with health coach or program leader (73%), improved lifestyle modification (65%) due to the program, and satisfaction with the program (75%). Open-ended questions confirmed themes related to benefits of program participation, suggestion for programmatic improvements as well as barriers to participation. Participant feedback could be used to guide interventions and tailor future program implementation.

  14. A Study on Components of Internal Control-Based Administrative System in Secondary Schools

    Science.gov (United States)

    Montri, Paitoon; Sirisuth, Chaiyuth; Lammana, Preeda

    2015-01-01

    The aim of this study was to study the components of the internal control-based administrative system in secondary schools, and make a Confirmatory Factor Analysis (CFA) to confirm the goodness of fit of empirical data and component model that resulted from the CFA. The study consisted of three steps: 1) studying of principles, ideas, and theories…

  15. Design and fabrication of a eccentric wheels based motorised alignment mechanism for cylindrical accelerator components

    International Nuclear Information System (INIS)

    Mundra, G.; Jain, V.; Karmarkar, Mangesh; Kotaiah, S.

    2006-01-01

    Precision alignment mechanisms with long term stability are required for accelerator components. For some of the components motorised and remotely operable alignment mechanism are required. An eccentric wheel mechanism based alignment system is very much suitable for such application. One such alignment system is designed, a prototype is machined/fabricated for SFDTL type accelerating structure and preliminary trial experiments have been done. (author)

  16. Prediction of Pure Component Adsorption Equilibria Using an Adsorption Isotherm Equation Based on Vacancy Solution Theory

    DEFF Research Database (Denmark)

    Marcussen, Lis; Aasberg-Petersen, K.; Krøll, Annette Elisabeth

    2000-01-01

    An adsorption isotherm equation for nonideal pure component adsorption based on vacancy solution theory and the Non-Random-Two-Liquid (NRTL) equation is found to be useful for predicting pure component adsorption equilibria at a variety of conditions. The isotherm equation is evaluated successfully...... adsorption systems, spreading pressure and isosteric heat of adsorption are also calculated....

  17. A Service Component-based Accounting and Charging Architecture to Support Interim Mechanisms across Multiple Domains

    NARCIS (Netherlands)

    Le, V.M.; van Beijnum, Bernhard J.F.; Huitema, G.B.

    Today, telematics services are o Aen compositions of different chargeable service components offered by different service providers. To enhance component-based accounting and charging, the service composition information is used to match with the corresponding charging structure of a service

  18. Design and Application of an Ontology for Component-Based Modeling of Water Systems

    Science.gov (United States)

    Elag, M.; Goodall, J. L.

    2012-12-01

    Many Earth system modeling frameworks have adopted an approach of componentizing models so that a large model can be assembled by linking a set of smaller model components. These model components can then be more easily reused, extended, and maintained by a large group of model developers and end users. While there has been a notable increase in component-based model frameworks in the Earth sciences in recent years, there has been less work on creating framework-agnostic metadata and ontologies for model components. Well defined model component metadata is needed, however, to facilitate sharing, reuse, and interoperability both within and across Earth system modeling frameworks. To address this need, we have designed an ontology for the water resources community named the Water Resources Component (WRC) ontology in order to advance the application of component-based modeling frameworks across water related disciplines. Here we present the design of the WRC ontology and demonstrate its application for integration of model components used in watershed management. First we show how the watershed modeling system Soil and Water Assessment Tool (SWAT) can be decomposed into a set of hydrological and ecological components that adopt the Open Modeling Interface (OpenMI) standard. Then we show how the components can be used to estimate nitrogen losses from land to surface water for the Baltimore Ecosystem study area. Results of this work are (i) a demonstration of how the WRC ontology advances the conceptual integration between components of water related disciplines by handling the semantic and syntactic heterogeneity present when describing components from different disciplines and (ii) an investigation of a methodology by which large models can be decomposed into a set of model components that can be well described by populating metadata according to the WRC ontology.

  19. IPTV program recommendation based on combination strategies

    Directory of Open Access Journals (Sweden)

    Li Hao

    2018-01-01

    Full Text Available As a new interactive service technology, IPTV has been extensively studying in the field of TV pro-gram recommendation, but the sparse of the user-program rating matrix and the cold-start problem is a bottleneck that the program recommended accurately. In this paper, a flexible combination of two recommendation strategies proposed, which explored the sparse and cold-start problem as well as the issue of user interest change over time. This paper achieved content-based filtering section and collaborative filtering section according to the two combination strategies, which effectively solved the cold-start program and over the sparse problem and the problem of users interest change over time. The experimental results showed that this combinational recommendation system in optimal parameters compared by using any one of two combination strategies or not using any combination strategy at all, and the reducing range of MAE is [2.7%,3%].The increasing range of precision and recall is [13.8%95.5%] and [0,97.8%], respectively. The experiment showed better results when using combinational recommendation system in optimal parameters than using each combination strategies individually or not using any combination strategy.

  20. Motivating programming students by Problem Based Learning and LEGO robots

    DEFF Research Database (Denmark)

    Lykke, Marianne; Coto Chotto, Mayela; Mora, Sonia

    2014-01-01

    . For this reason the school is focusing on different teaching methods to help their students master these skills. This paper introduces an experimental, controlled comparison study of three learning designs, involving a problem based learning (PBL) approach in connection with the use of LEGO Mindstorms to improve...... students programming skills and motivation for learning in an introductory programming course. The paper reports the results related with one of the components of the study - the experiential qualities of the three learning designs. The data were collected through a questionnaire survey with 229 students...... from three groups exposed to different learning designs and through six qualitative walk-alongs collecting data from these groups by informal interviews and observations. Findings from the three studies were discussed in three focus group interviews with 10 students from the three experimental groups....

  1. Users guide for WoodCite, a product cost quotation tool for wood component manufacturers [computer program

    Science.gov (United States)

    Jeff Palmer; Adrienn Andersch; Jan Wiedenbeck; Urs. Buehlmann

    2014-01-01

    WoodCite is a Microsoft® Access-based application that allows wood component manufacturers to develop product price quotations for their current and potential customers. The application was developed by the U.S. Forest Service and Virginia Polytechnic Institute and State University, in cooperation with the Wood Components Manufacturers Association.

  2. Pilot monitoring program: geologic input for the hillslope component (includes a discussion of Caspar Creek geology and geomorphology)

    Science.gov (United States)

    T. E. Spittler

    1995-01-01

    The California Department of Conservation, Division of Mines and Geology (DMG) is submitting this report and accompanying maps to the California Department of Forestry and Fire Protection (CDF) to fulfill Interagency Agreement number 8CA38400, Pilot Monitoring Program -- Geologic Input for the Hillslope Component. Under this agreement, DMG has assisted CDF in the...

  3. Set up for Success: An Examination of the Ronald E. McNair Postbaccalaureate Achievement Program's Mentoring Component

    Science.gov (United States)

    Wyre, Dwuena Cene

    2011-01-01

    Often, individuals are set up to fail. However, effective mentoring can set individuals up to succeed. This nonexperimental cross-sectional, predictive study examines the Ronald E. McNair Postbaccalaureate Achievement Program's mentoring component. Specific focus is placed on faculty mentor competency and its impact on McNair student intent to…

  4. Central obesity is important but not essential component of the metabolic syndrome for predicting diabetes mellitus in a hypertensive family-based cohort. Results from the Stanford Asia-pacific program for hypertension and insulin resistance (SAPPHIRe) Taiwan follow-up study.

    Science.gov (United States)

    Lee, I-Te; Chiu, Yen-Feng; Hwu, Chii-Min; He, Chih-Tsueng; Chiang, Fu-Tien; Lin, Yu-Chun; Assimes, Themistocles; Curb, J David; Sheu, Wayne H-H

    2012-04-26

    Metabolic abnormalities have a cumulative effect on development of diabetes, but only central obesity has been defined as the essential criterion of metabolic syndrome (MetS) by the International Diabetes Federation. We hypothesized that central obesity contributes to a higher risk of new-onset diabetes than other metabolic abnormalities in the hypertensive families. Non-diabetic Chinese were enrolled and MetS components were assessed to establish baseline data in a hypertensive family-based cohort study. Based on medical records and glucose tolerance test (OGTT), the cumulative incidence of diabetes was analyzed in this five-year study by Cox regression models. Contribution of central obesity to development of new-onset diabetes was assessed in subjects with the same number of positive MetS components. Among the total of 595 subjects who completed the assessment, 125 (21.0%) developed diabetes. Incidence of diabetes increased in direct proportion to the number of positive MetS components (P ≪ 0.001). Although subjects with central obesity had a higher incidence of diabetes than those without (55.7 vs. 30.0 events/1000 person-years, P ≪ 0.001), the difference became non-significant after adjusting of the number of positive MetS components (hazard ratio = 0.72, 95%CI: 0.45-1.13). Furthermore, in all participants with three positive MetS components, there was no difference in the incidence of diabetes between subjects with and without central obesity (hazard ratio = 1.04, 95%CI: 0.50-2.16). In Chinese hypertensive families, the incidence of diabetes in subjects without central obesity was similar to that in subjects with central obesity when they also had the same number of positive MetS components. We suggest that central obesity is very important, but not the essential component of the metabolic syndrome for predicting of new-onset diabetes. ( NCT00260910, ClinicalTrials.gov).

  5. Communicative automata based programming. Society Framework

    Directory of Open Access Journals (Sweden)

    Andrei Micu

    2015-10-01

    Full Text Available One of the aims of this paper is to present a new programming paradigm based on the new paradigms intensively used in IT industry. Implementation of these techniques can improve the quality of code through modularization, not only in terms of entities used by a program, but also in terms of states in which they pass. Another aspect followed in this paper takes into account that in the development of software applications, the transition from the design to the source code is a very expensive step in terms of effort and time spent. Diagrams can hide very important details for simplicity of understanding, which can lead to incorrect or incomplete implementations. To improve this process communicative automaton based programming comes with an intermediate step. We will see how it goes after creating modeling diagrams to communicative automata and then to writing code for each of them. We show how the transition from one step to another is much easier and intuitive.

  6. Building upon Bystander Intervention: A Multi-Component Prevention Programming Approach for University Sorority Members

    Science.gov (United States)

    Steward, Jennifer M.

    2017-01-01

    Sexual violence on college campuses is a pervasive problem with the potential for extensive physical and psychological health consequences. Institutions have begun implementing prevention programs; however, more research is needed to understand whether these programs are effective. Bystander intervention programs have increased in popularity…

  7. Nuclear electronic components of surface contamination monitor based on multi-electrode proportional counter

    International Nuclear Information System (INIS)

    Du Xiangyang; Zhang Yong; Han Shuping; Rao Xianming; Fang Jintu

    2001-01-01

    The nuclear electronic components applying in Portal Monitor and Hands and Feet Surface Contamination Monitor were based on modern integrated circuit are introduced. The detailed points in circuit design and manufacturing technique are analyzed

  8. A component-based open hypermedia approach to integreting structure services

    DEFF Research Database (Denmark)

    Grønbæk, Kaj; Nürnberg, Peter J.; Bucka-Lassen, Dirk

    1999-01-01

    In this paper, we consider the issue of integrating different structure services within a component-based open hypermedia system. We do so by considering the task of collaborative editing, which calls for a variety of different structures traditionally supplied by different structure services. We...... discuss the nature of collaborative editing and how it can be supported by a combination of spatial and navigational hypermedia services. We then present a component-based open hypermedia system architecture and describe various methods of integrating different structure services provided within...... such an architecture. We show the advantages of integration within a component-based framework over other means of integration, highlighting some of the main advantages of the component-based approach to open hypermedia system design and implementation....

  9. Model-Based Design Tools for Extending COTS Components To Extreme Environments, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovation in this project is model-based design (MBD) tools for predicting the performance and useful life of commercial-off-the-shelf (COTS) components and...

  10. RF Front End Based on MEMS Components for Miniaturized Digital EVA Radio, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — In this SBIR project, AlphaSense, Inc. and the Carnegie Mellon University propose to develop a RF receiver front end based on CMOS-MEMS components for miniaturized...

  11. Uniframe: A Unified Framework for Developing Service-Oriented, Component-Based Distributed Software Systems

    National Research Council Canada - National Science Library

    Raje, Rajeev R; Olson, Andrew M; Bryant, Barrett R; Burt, Carol C; Auguston, Makhail

    2005-01-01

    .... It describes how this approach employs a unifying framework for specifying such systems to unite the concepts of service-oriented architectures, a component-based software engineering methodology...

  12. Adding a Performance-Based Component to Surface Warfare Officer Bonuses: Will it Affect Retention?

    National Research Council Canada - National Science Library

    Carman, Aron S; Mudd, Ryan M

    2008-01-01

    ... Authorization and the current officer inventory beginning at 9 years of commissioned service. The objective of this study was to analyze the 13-year retention effect of adding a performance-based component to the SWO Critical Skills Bonus (CSB...

  13. Predictive factors of adherence to frequency and duration components in home exercise programs for neck and low back pain: an observational study

    Directory of Open Access Journals (Sweden)

    Jimeno-Serrano Francisco J

    2009-12-01

    Full Text Available Abstract Background Evidence suggests that to facilitate physical activity sedentary people may adhere to one component of exercise prescriptions (intensity, duration or frequency without adhering to other components. Some experts have provided evidence for determinants of adherence to different components among healthy people. However, our understanding remains scarce in this area for patients with neck or low back pain. The aims of this study are to determine whether patients with neck or low back pain have different rates of adherence to exercise components of frequency per week and duration per session when prescribed with a home exercise program, and to identify if adherence to both exercise components have distinct predictive factors. Methods A cohort of one hundred eighty-four patients with chronic neck or low back pain who attended physiotherapy in eight primary care centers were studied prospectively one month after intervention. The study had three measurement periods: at baseline (measuring characteristics of patients and pain, at the end of physiotherapy intervention (measuring characteristics of the home exercise program and a month later (measuring professional behaviors during clinical encounters, environmental factors and self-efficacy, and adherence behavior. Results Adherence to duration per session (70.9% ± 7.1 was more probable than adherence to frequency per week (60.7% ± 7.0. Self-efficacy was a relevant factor for both exercise components (p Conclusion We have shown in a clinic-based study that adherence to exercise prescription frequency and duration components have distinct levels and predictive factors. We recommend additional study, and advise that differential attention be given in clinical practice to each exercise component for improving adherence.

  14. 75 FR 67751 - Medicare Program: Community-Based Care Transitions Program (CCTP) Meeting

    Science.gov (United States)

    2010-11-03

    ...] Medicare Program: Community-Based Care Transitions Program (CCTP) Meeting AGENCY: Centers for Medicare... guidance and ask questions about the upcoming Community-based Care Transitions Program. The meeting is open... conference will also provide an overview of the Community-based Care Transitions Program (CCTP) and provide...

  15. Seca Coal-Based Systems Program

    International Nuclear Information System (INIS)

    Alinger, Matthew

    2008-01-01

    This report summarizes the progress made during the August 1, 2006 - May 31, 2008 award period under Cooperative Agreement DE-FC26-05NT42614 for the U. S. Department of Energy/National Energy Technology Laboratory (USDOE/NETL) entitled 'SECA Coal Based Systems'. The initial overall objective of this program was to design, develop, and demonstrate multi-MW integrated gasification fuel cell (IGFC) power plants with >50% overall efficiency from coal (HHV) to AC power. The focus of the program was to develop low-cost, high performance, modular solid oxide fuel cell (SOFC) technology to support coal gas IGFC power systems. After a detailed GE internal review of the SOFC technology, the program was de-scoped at GE's request. The primary objective of this program was then focused on developing a performance degradation mitigation path for high performing, cost-effective solid oxide fuel cells (SOFCs). There were two initial major objectives in this program. These were: (1) Develop and optimize a design of a >100 MWe integrated gasification fuel cell (IGFC) power plant; (2) Resolve identified barrier issues concerning the long-term economic performance of SOFC. The program focused on designing and cost estimating the IGFC system and resolving technical and economic barrier issues relating to SOFC. In doing so, manufacturing options for SOFC cells were evaluated, options for constructing stacks based upon various cell configurations identified, and key performance characteristics were identified. Key factors affecting SOFC performance degradation for cells in contact with metallic interconnects were be studied and a fundamental understanding of associated mechanisms was developed using a fixed materials set. Experiments and modeling were carried out to identify key processes/steps affecting cell performance degradation under SOFC operating conditions. Interfacial microstructural and elemental changes were characterized, and their relationships to observed degradation

  16. Seca Coal-Based Systems Program

    Energy Technology Data Exchange (ETDEWEB)

    Matthew Alinger

    2008-05-31

    This report summarizes the progress made during the August 1, 2006 - May 31, 2008 award period under Cooperative Agreement DE-FC26-05NT42614 for the U. S. Department of Energy/National Energy Technology Laboratory (USDOE/NETL) entitled 'SECA Coal Based Systems'. The initial overall objective of this program was to design, develop, and demonstrate multi-MW integrated gasification fuel cell (IGFC) power plants with >50% overall efficiency from coal (HHV) to AC power. The focus of the program was to develop low-cost, high performance, modular solid oxide fuel cell (SOFC) technology to support coal gas IGFC power systems. After a detailed GE internal review of the SOFC technology, the program was de-scoped at GE's request. The primary objective of this program was then focused on developing a performance degradation mitigation path for high performing, cost-effective solid oxide fuel cells (SOFCs). There were two initial major objectives in this program. These were: (1) Develop and optimize a design of a >100 MWe integrated gasification fuel cell (IGFC) power plant; (2) Resolve identified barrier issues concerning the long-term economic performance of SOFC. The program focused on designing and cost estimating the IGFC system and resolving technical and economic barrier issues relating to SOFC. In doing so, manufacturing options for SOFC cells were evaluated, options for constructing stacks based upon various cell configurations identified, and key performance characteristics were identified. Key factors affecting SOFC performance degradation for cells in contact with metallic interconnects were be studied and a fundamental understanding of associated mechanisms was developed using a fixed materials set. Experiments and modeling were carried out to identify key processes/steps affecting cell performance degradation under SOFC operating conditions. Interfacial microstructural and elemental changes were characterized, and their relationships to observed

  17. Power Transformer Differential Protection Based on Neural Network Principal Component Analysis, Harmonic Restraint and Park's Plots

    OpenAIRE

    Tripathy, Manoj

    2012-01-01

    This paper describes a new approach for power transformer differential protection which is based on the wave-shape recognition technique. An algorithm based on neural network principal component analysis (NNPCA) with back-propagation learning is proposed for digital differential protection of power transformer. The principal component analysis is used to preprocess the data from power system in order to eliminate redundant information and enhance hidden pattern of differential current to disc...

  18. A Component-based Software Development and Execution Framework for CAx Applications

    Directory of Open Access Journals (Sweden)

    N. Matsuki

    2004-01-01

    Full Text Available Digitalization of the manufacturing process and technologies is regarded as the key to increased competitive ability. The MZ-Platform infrastructure is a component-based software development framework, designed for supporting enterprises to enhance digitalized technologies using software tools and CAx components in a self-innovative way. In the paper we show the algorithm, system architecture, and a CAx application example on MZ-Platform. We also propose a new parametric data structure based on MZ-Platform.

  19. Data base formation for important components of reactor TRIGA MARK II

    International Nuclear Information System (INIS)

    Jordan, R.; Mavko, B.; Kozuh, M.

    1992-01-01

    The paper represents specific data base formation for reactor TRIGA MARK II in Podgorica. Reactor operation data from year 1985 to 1990 were collected. Two groups of collected data were formed. The first group includes components data and the second group covers data of reactor scrams. Time related and demand related models were used for data evaluation. Parameters were estimated by classical method. Similar data bases are useful everywhere where components unavailabilities may have severe drawback. (author) [sl

  20. Software Component Clustering and Retrieval: An Entropy-based Fuzzy k-Modes Methodology

    OpenAIRE

    Stylianou, Constantinos; Andreou, Andreas S.

    2008-01-01

    The number of software houses attempting to adopt a component-based development approach is rapidly increasing. However many organisations still find it difficult to complete the shift as it requires them to alter their entire software development process and philosophy. Furthermore, to promote component-based software engineering, organisations must be ready to promote reusability and this can only be attained if the proper framework exists from which a developer can access, search and retri...

  1. Safety prediction for basic components of safety critical software based on static testing

    International Nuclear Information System (INIS)

    Son, H.S.; Seong, P.H.

    2001-01-01

    The purpose of this work is to develop a safety prediction method, with which we can predict the risk of software components based on static testing results at the early development stage. The predictive model combines the major factor with the quality factor for the components, both of which are calculated based on the measures proposed in this work. The application to a safety-critical software system demonstrates the feasibility of the safety prediction method. (authors)

  2. Safety prediction for basic components of safety-critical software based on static testing

    International Nuclear Information System (INIS)

    Son, H.S.; Seong, P.H.

    2000-01-01

    The purpose of this work is to develop a safety prediction method, with which we can predict the risk of software components based on static testing results at the early development stage. The predictive model combines the major factor with the quality factor for the components, which are calculated based on the measures proposed in this work. The application to a safety-critical software system demonstrates the feasibility of the safety prediction method. (authors)

  3. Research Based Science Education: An Exemplary Program for Broader Impacts

    Science.gov (United States)

    Walker, C. E.; Pompea, S. M.

    2016-12-01

    Broader impacts are most effective when standing on the shoulders of successful programs. The Research Based Science Education (RBSE) program was such a successful program and played a major role in activating effective opportunities beyond the scope of its program. NSF funded the National Optical Astronomy Observatory (NOAO) to oversee the project from 1996-2008. RBSE provided primarily high school teachers with on-site astronomy research experiences and their students with astronomy research projects that their teachers could explain with confidence. The goal of most student research projects is to inspire and motivate students to go into STEM fields. The authors of the original NSF proposal felt that for students to do research in the classroom, a foundational research experience for teachers must first be provided. The key components of the program consisted of 16 teachers/year on average; a 15-week distance learning course covering astronomy content, research, mentoring and leadership skills; a subsequent 10-day summer workshop with half the time on Kitt Peak on research-class telescopes; results presented on the 9th day; research brought back to the classroom; more on-site observing opportunities for students and teachers; data placed on-line to reach a wider audience; opportunities to submit research articles to the project's refereed journal; and travel for teachers (and the 3 teachers they each mentored) to a professional meeting. In 2004, leveraging on the well-established RBSE program, the NOAO/NASA Spitzer Space Telescope Research began. Between 2005 and 2008, metrics included 32 teachers (mostly from RBSE), 10 scientists, 15 Spitzer Director Discretionary proposals, 31 AAS presentations and many Intel ISEF winners. Under new funding in 2009, the NASA/IPAC Teacher Archive Research Program was born with similar goals and thankfully still runs today. Broader impacts, lessons learned and ideas for future projects will be discussed in this presentation.

  4. An Evidence-Based Assessment of Faith-Based Programs: Do Faith-Based Programs "Work" to Reduce Recidivism?

    Science.gov (United States)

    Dodson, Kimberly D.; Cabage, Leann N.; Klenowski, Paul M.

    2011-01-01

    Faith-based organizations administer many of the prison-based programs aimed at reducing recidivism. Many of these organizations also manage treatment programs for substance abusers, at-risk juveniles, and ex-offenders. Much of the research on religiosity and delinquency indicates that the two are inversely related. Therefore, it seems plausible…

  5. Why every national deep-geological-isolation program needs a long-term science & technology component

    International Nuclear Information System (INIS)

    Budnitz, R J

    2006-01-01

    The objective of this paper is to set down the rationale for a separate Science & Technology (S&T) Program within every national deep-geological-isolation program. The fundamental rationale for such a Program is to provide a dedicated focus for longer-term science and technology activities that ultimately will benefit the whole repository mission. Such a Program, separately funded and with a dedicated staff (separate from the ''mainline'' activities to develop the repository, the surface facilities, and the transportation system), can devote itself exclusively to the development and management of a long-term science and technology program. Broad experience in governments worldwide has demonstrated that line offices are unlikely to be able to develop and sustain both the appropriate longer-term philosophy and the specialized skills associated with managing longer-term science and technology projects. Accomplishing both of these requires a separate dedicated program office with its own staff

  6. Textile-Based Electronic Components for Energy Applications: Principles, Problems, and Perspective.

    Science.gov (United States)

    Kaushik, Vishakha; Lee, Jaehong; Hong, Juree; Lee, Seulah; Lee, Sanggeun; Seo, Jungmok; Mahata, Chandreswar; Lee, Taeyoon

    2015-09-07

    Textile-based electronic components have gained interest in the fields of science and technology. Recent developments in nanotechnology have enabled the integration of electronic components into textiles while retaining desirable characteristics such as flexibility, strength, and conductivity. Various materials were investigated in detail to obtain current conductive textile technology, and the integration of electronic components into these textiles shows great promise for common everyday applications. The harvest and storage of energy in textile electronics is a challenge that requires further attention in order to enable complete adoption of this technology in practical implementations. This review focuses on the various conductive textiles, their methods of preparation, and textile-based electronic components. We also focus on fabrication and the function of textile-based energy harvesting and storage devices, discuss their fundamental limitations, and suggest new areas of study.

  7. Textile-Based Electronic Components for Energy Applications: Principles, Problems, and Perspective

    Directory of Open Access Journals (Sweden)

    Vishakha Kaushik

    2015-09-01

    Full Text Available Textile-based electronic components have gained interest in the fields of science and technology. Recent developments in nanotechnology have enabled the integration of electronic components into textiles while retaining desirable characteristics such as flexibility, strength, and conductivity. Various materials were investigated in detail to obtain current conductive textile technology, and the integration of electronic components into these textiles shows great promise for common everyday applications. The harvest and storage of energy in textile electronics is a challenge that requires further attention in order to enable complete adoption of this technology in practical implementations. This review focuses on the various conductive textiles, their methods of preparation, and textile-based electronic components. We also focus on fabrication and the function of textile-based energy harvesting and storage devices, discuss their fundamental limitations, and suggest new areas of study.

  8. Fault Diagnosis Method Based on Information Entropy and Relative Principal Component Analysis

    Directory of Open Access Journals (Sweden)

    Xiaoming Xu

    2017-01-01

    Full Text Available In traditional principle component analysis (PCA, because of the neglect of the dimensions influence between different variables in the system, the selected principal components (PCs often fail to be representative. While the relative transformation PCA is able to solve the above problem, it is not easy to calculate the weight for each characteristic variable. In order to solve it, this paper proposes a kind of fault diagnosis method based on information entropy and Relative Principle Component Analysis. Firstly, the algorithm calculates the information entropy for each characteristic variable in the original dataset based on the information gain algorithm. Secondly, it standardizes every variable’s dimension in the dataset. And, then, according to the information entropy, it allocates the weight for each standardized characteristic variable. Finally, it utilizes the relative-principal-components model established for fault diagnosis. Furthermore, the simulation experiments based on Tennessee Eastman process and Wine datasets demonstrate the feasibility and effectiveness of the new method.

  9. Development of active-X component for use in web based thermal hydraulic data bank

    International Nuclear Information System (INIS)

    Lee, Y. J.; Chung, B. D.

    2003-01-01

    An active-X component to use as the engine for the web-based thermal hydraulic data bank has been developed. The development of the active-X component was carried out primarily for employment in the web-based thermal-hydraulic databank. The active-X component was developed with the objective to minimize the size of the component and the data traffic while maximizing the functionality. For this end, the data is downloaded in a compressed format to minimize the downloading time, and Delphi language is used in the efforts to minimize the size of the active-X component as well as for fast execution time. The functionality of active-X component was tested on ENCOUNTER data package by embedding the component in a prototype web-page under a server-client environment. The test demonstrated that the active-X component functions as intended and that it is capable of very easy data retrieval and display

  10. Conceptual bases of Christian, faith-based substance abuse rehabilitation programs: qualitative analysis of staff interviews.

    Science.gov (United States)

    McCoy, Lisa K; Hermos, John A; Bokhour, Barbara G; Frayne, Susan M

    2004-09-01

    Faith-based substance abuse rehabilitation programs provide residential treatment for many substance abusers. To determine key governing concepts of such programs, we conducted semi-structured interviews with sample of eleven clinical and administrative staff referred to us by program directors at six, Evangelical Christian, faith-based, residential rehabilitation programs representing two large, nationwide networks. Qualitative analysis using grounded theory methods examined how spirituality is incorporated into treatment and elicited key theories of addiction and recovery. Although containing comprehensive secular components, the core activities are strongly rooted in a Christian belief system that informs their understanding of addiction and recovery and drives the treatment format. These governing conceptions, that addiction stems from attempts to fill a spiritual void through substance use and recovery through salvation and a long-term relationship with God, provide an explicit, theory-driven model upon which they base their core treatment activities. Knowledge of these core concepts and practices should be helpful to clinicians in considering referrals to faith-based recovery programs.

  11. A Flexible Component based Access Control Architecture for OPeNDAP Services

    Science.gov (United States)

    Kershaw, Philip; Ananthakrishnan, Rachana; Cinquini, Luca; Lawrence, Bryan; Pascoe, Stephen; Siebenlist, Frank

    2010-05-01

    . These components filter requests to the service they protect and apply the required authentication and authorisation schemes. Filters have been developed for OpenID and SSL client based authentication. The latter enabling access with MyProxy issued credentials. By preserving a clear separation between the security and application functionality, multiple authentication technologies may be supported without the need for modification to the underlying OPeNDAP application. The software has been developed in the Python programming language securing the Python based OPeNDAP implementation, PyDAP. This utilises the Python WSGI (Web Server Gateway Interface) specification to create distinct security filter components. Work is also currently underway to develop a parallel Java based filter implementation to secure the THREDDS Data Server. Whilst the ability to apply this flexible approach to the server side security layer is important, the development of compatible client software is vital to the take up of these services across a wide user base. To date PyDAP and wget based clients have been tested and work is planned to integrate the required security interface into the netCDF API. This forms part of ongoing collaboration with the OPeNDAP user and development community to ensure interoperability.

  12. Pilot study of a mindfulness-based, multi-component, in-school group sleep intervention in adolescent girls.

    Science.gov (United States)

    Bei, Bei; Byrne, Michelle L; Ivens, Clare; Waloszek, Joanna; Woods, Michael J; Dudgeon, Paul; Murray, Greg; Nicholas, Christian L; Trinder, John; Allen, Nicholas B

    2013-05-01

    Existing literature links poor sleep and anxiety symptoms in adolescents. This pilot study aimed to develop a practical method through which a program to improve sleep could reach adolescents in need and to examine the feasibility of a mindfulness-based, multi-component group sleep intervention using sleep and anxiety as outcome measures. Sixty-two grade 9 students (aged 13-15) at a girls' school were screened with the Pittsburgh Sleep Quality Index (PSQI) and Spence Children's Anxiety Scale (SCAS). Ten participants with self-reported poor sleep were enrolled into a six-session program based on Bootzin & Stevens, with added stress/anxiety-specific components. Sessions covered key aspects of basic mindfulness concepts and practice, sleep hygiene, sleep scheduling, evening/daytime habits, stimulus control, skills for bedtime worries and healthy attitudes to sleep. Treatment changes were measured by pre-post scores on the PSQI, SCAS and 7-day actigraphy-measured sleep. The program demonstrated high acceptability, with a completion rate of 90%. Based on effect-size analysis, participants showed significant improvement on objective sleep onset latency (SOL), sleep efficiency and total sleep time; actigraphy data also showed significantly earlier bedtime, rise time and smaller day-to-day bedtime variation. Post-intervention global PSQI scores were significantly lower than that of pre-intervention, with significant improvement in subjective SOL, sleep quality and sleep-related daytime dysfunction. There were small improvements on some subscales of the SCAS, but change on its total score was minimal. A mindfulness-based, multi-component, in-school group sleep intervention following brief screening is feasible, and has the potential to improve sleep. Its impact on anxiety needs further investigation. © 2012 Wiley Publishing Asia Pty Ltd.

  13. Low Cost High Performance Generator Technology Program. Volume 3. Component development

    International Nuclear Information System (INIS)

    1975-06-01

    The status of the component development effort both in the thermoelectric module area and in the heat source task is reported. In addition, related efforts by outside facilities are identified and a bibliography of heat source development documents is presented

  14. Mathematical programming solver based on local search

    CERN Document Server

    Gardi, Frédéric; Darlay, Julien; Estellon, Bertrand; Megel, Romain

    2014-01-01

    This book covers local search for combinatorial optimization and its extension to mixed-variable optimization. Although not yet understood from the theoretical point of view, local search is the paradigm of choice for tackling large-scale real-life optimization problems. Today's end-users demand interactivity with decision support systems. For optimization software, this means obtaining good-quality solutions quickly. Fast iterative improvement methods, like local search, are suited to satisfying such needs. Here the authors show local search in a new light, in particular presenting a new kind of mathematical programming solver, namely LocalSolver, based on neighborhood search. First, an iconoclast methodology is presented to design and engineer local search algorithms. The authors' concern about industrializing local search approaches is of particular interest for practitioners. This methodology is applied to solve two industrial problems with high economic stakes. Software based on local search induces ex...

  15. Solving Component Structural Dynamic Failures Due to Extremely High Frequency Structural Response on the Space Shuttle Program

    Science.gov (United States)

    Frady, Greg; Nesman, Thomas; Zoladz, Thomas; Szabo, Roland

    2010-01-01

    For many years, the capabilities to determine the root-cause failure of component failures have been limited to the analytical tools and the state of the art data acquisition systems. With this limited capability, many anomalies have been resolved by adding material to the design to increase robustness without the ability to determine if the design solution was satisfactory until after a series of expensive test programs were complete. The risk of failure and multiple design, test, and redesign cycles were high. During the Space Shuttle Program, many crack investigations in high energy density turbomachines, like the SSME turbopumps and high energy flows in the main propulsion system, have led to the discovery of numerous root-cause failures and anomalies due to the coexistences of acoustic forcing functions, structural natural modes, and a high energy excitation, such as an edge tone or shedding flow, leading the technical community to understand many of the primary contributors to extremely high frequency high cycle fatique fluid-structure interaction anomalies. These contributors have been identified using advanced analysis tools and verified using component and system tests during component ground tests, systems tests, and flight. The structural dynamics and fluid dynamics communities have developed a special sensitivity to the fluid-structure interaction problems and have been able to adjust and solve these problems in a time effective manner to meet budget and schedule deadlines of operational vehicle programs, such as the Space Shuttle Program over the years.

  16. Impact of a multifaceted community-based falls prevention program on balance-related psychologic factors.

    Science.gov (United States)

    Filiatrault, Johanne; Gauvin, Lise; Richard, Lucie; Robitaille, Yvonne; Laforest, Sophie; Fournier, Michel; Corriveau, Hélène

    2008-10-01

    To assess the impact of a multifaceted falls prevention program including exercise and educational components on perceived balance and balance confidence among community-dwelling seniors. Quasi-experimental design. Community-based organizations. Two hundred community-dwelling adults aged 60 years and over recruited by community-based organizations. A 12-week multifaceted falls prevention program including 3 components (a 1-hour group exercise class held twice a week, a 30-minute home exercise module to be performed at least once a week, a 30-minute educational class held once a week). Perceived balance and balance confidence. Multivariate analysis showed that the program was successful in increasing perceived balance in experimental participants. However, balance confidence was not improved by program participation. A multifaceted community-based falls prevention program that was successful in improving balance performance among community-dwelling seniors also had a positive impact on perceived balance. However, the program did not improve participants' balance confidence. These results suggest that balance confidence has determinants other than balance and that new components and/or modifications of existing components of the program are required to achieve maximal benefits for seniors in terms of physical and psychologic outcomes.

  17. Spirituality as a Component in a Treatment Program for Sexually Addicted Roman Catholic Clergy.

    Science.gov (United States)

    Hudson, Patricia E.

    1997-01-01

    A treatment program that integrates spirituality and therapy for sex abusers who are Roman Catholic priests or brothers is described. Selections from an interview with the program director cover definitions, philosophy, women as therapists, daily activity, candidates, and the spiritual dimension. Measures of success and after-care are discussed.…

  18. Principal component analysis of tomato genotypes based on some morphological and biochemical quality indicators

    Directory of Open Access Journals (Sweden)

    Glogovac Svetlana

    2012-01-01

    Full Text Available This study investigates variability of tomato genotypes based on morphological and biochemical fruit traits. Experimental material is a part of tomato genetic collection from Institute of Filed and Vegetable Crops in Novi Sad, Serbia. Genotypes were analyzed for fruit mass, locule number, index of fruit shape, fruit colour, dry matter content, total sugars, total acidity, lycopene and vitamin C. Minimum, maximum and average values and main indicators of variability (CV and σ were calculated. Principal component analysis was performed to determinate variability source structure. Four principal components, which contribute 93.75% of the total variability, were selected for analysis. The first principal component is defined by vitamin C, locule number and index of fruit shape. The second component is determined by dry matter content, and total acidity, the third by lycopene, fruit mass and fruit colour. Total sugars had the greatest part in the fourth component.

  19. High Temperature Corrosion Problem of Boiler Components in presence of Sulfur and Alkali based Fuels

    Science.gov (United States)

    Ghosh, Debashis; Mitra, Swapan Kumar

    2011-04-01

    Material degradation and ageing is of particular concern for fossil fuel fired power plant components. New techniques/approaches have been explored in recent years for Residual Life assessment of aged components and material degradation due to different damage mechanism like creep, fatigue, corrosion and erosion etc. Apart from the creep, the high temperature corrosion problem in a fossil fuel fired boiler is a matter of great concern if the fuel contains sulfur, chlorine sodium, potassium and vanadium etc. This paper discusses the material degradation due to high temperature corrosion in different critical components of boiler like water wall, superheater and reheater tubes and also remedial measures to avoid the premature failure. This paper also high lights the Residual Life Assessment (RLA) methodology of the components based on high temperature fireside corrosion. of different critical components of boiler.

  20. Leaders Growing Leaders: Designing a Tier-Based Leadership Program for Surgeons.

    Science.gov (United States)

    Torbeck, Laura; Rozycki, Grace; Dunnington, Gary

    2018-02-07

    Leadership has emerged as a crucial component of professional development for physicians in academic medicine. Most leadership skills can be learned and therefore best practices of delivering leadership development are in high demand. For practicing surgeons, specific strategies to teach leadership have been lacking. The purpose of this paper is to describe the structure of a tier-based leadership development program called Leaders Growing Leaders, to identify the major curricular components to each tier including measures and outcomes, and to share lessons learned for those who may want to begin a similar leadership development program. Copyright © 2018 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  1. SPSS and SAS programs for determining the number of components using parallel analysis and velicer's MAP test.

    Science.gov (United States)

    O'Connor, B P

    2000-08-01

    Popular statistical software packages do not have the proper procedures for determining the number of components in factor and principal components analyses. Parallel analysis and Velicer's minimum average partial (MAP) test are validated procedures, recommended widely by statisticians. However, many researchers continue to use alternative, simpler, but flawed procedures, such as the eigenvalues-greater-than-one rule. Use of the proper procedures might be increased if these procedures could be conducted within familiar software environments. This paper describes brief and efficient programs for using SPSS and SAS to conduct parallel analyses and the MAP test.

  2. Optimal condition-based maintenance decisions for systems with dependent stochastic degradation of components

    International Nuclear Information System (INIS)

    Hong, H.P.; Zhou, W.; Zhang, S.; Ye, W.

    2014-01-01

    Components in engineered systems are subjected to stochastic deterioration due to the operating environmental conditions, and the uncertainty in material properties. The components need to be inspected and possibly replaced based on preventive or failure replacement criteria to provide the intended and safe operation of the system. In the present study, we investigate the influence of dependent stochastic degradation of multiple components on the optimal maintenance decisions. We use copula to model the dependent stochastic degradation of components, and formulate the optimal decision problem based on the minimum expected cost rule and the stochastic dominance rules. The latter is used to cope with decision maker's risk attitude. We illustrate the developed probabilistic analysis approach and the influence of the dependency of the stochastic degradation on the preferred decisions through numerical examples

  3. Color Independent Components Based SIFT Descriptors for Object/Scene Classification

    Science.gov (United States)

    Ai, Dan-Ni; Han, Xian-Hua; Ruan, Xiang; Chen, Yen-Wei

    In this paper, we present a novel color independent components based SIFT descriptor (termed CIC-SIFT) for object/scene classification. We first learn an efficient color transformation matrix based on independent component analysis (ICA), which is adaptive to each category in a database. The ICA-based color transformation can enhance contrast between the objects and the background in an image. Then we compute CIC-SIFT descriptors over all three transformed color independent components. Since the ICA-based color transformation can boost the objects and suppress the background, the proposed CIC-SIFT can extract more effective and discriminative local features for object/scene classification. The comparison is performed among seven SIFT descriptors, and the experimental classification results show that our proposed CIC-SIFT is superior to other conventional SIFT descriptors.

  4. Predictive based monitoring of nuclear plant component degradation using support vector regression

    International Nuclear Information System (INIS)

    Agarwal, Vivek; Alamaniotis, Miltiadis; Tsoukalas, Lefteri H.

    2015-01-01

    Nuclear power plants (NPPs) are large installations comprised of many active and passive assets. Degradation monitoring of all these assets is expensive (labor cost) and highly demanding task. In this paper a framework based on Support Vector Regression (SVR) for online surveillance of critical parameter degradation of NPP components is proposed. In this case, on time replacement or maintenance of components will prevent potential plant malfunctions, and reduce the overall operational cost. In the current work, we apply SVR equipped with a Gaussian kernel function to monitor components. Monitoring includes the one-step-ahead prediction of the component's respective operational quantity using the SVR model, while the SVR model is trained using a set of previous recorded degradation histories of similar components. Predictive capability of the model is evaluated upon arrival of a sensor measurement, which is compared to the component failure threshold. A maintenance decision is based on a fuzzy inference system that utilizes three parameters: (i) prediction evaluation in the previous steps, (ii) predicted value of the current step, (iii) and difference of current predicted value with components failure thresholds. The proposed framework will be tested on turbine blade degradation data.

  5. Reliability Evaluation of Machine Center Components Based on Cascading Failure Analysis

    Science.gov (United States)

    Zhang, Ying-Zhi; Liu, Jin-Tong; Shen, Gui-Xiang; Long, Zhe; Sun, Shu-Guang

    2017-07-01

    In order to rectify the problems that the component reliability model exhibits deviation, and the evaluation result is low due to the overlook of failure propagation in traditional reliability evaluation of machine center components, a new reliability evaluation method based on cascading failure analysis and the failure influenced degree assessment is proposed. A direct graph model of cascading failure among components is established according to cascading failure mechanism analysis and graph theory. The failure influenced degrees of the system components are assessed by the adjacency matrix and its transposition, combined with the Pagerank algorithm. Based on the comprehensive failure probability function and total probability formula, the inherent failure probability function is determined to realize the reliability evaluation of the system components. Finally, the method is applied to a machine center, it shows the following: 1) The reliability evaluation values of the proposed method are at least 2.5% higher than those of the traditional method; 2) The difference between the comprehensive and inherent reliability of the system component presents a positive correlation with the failure influenced degree of the system component, which provides a theoretical basis for reliability allocation of machine center system.

  6. A Natural Component-Based Oxygen Indicator with In-Pack Activation for Intelligent Food Packaging.

    Science.gov (United States)

    Won, Keehoon; Jang, Nan Young; Jeon, Junsu

    2016-12-28

    Intelligent food packaging can provide consumers with reliable and correct information on the quality and safety of packaged foods. One of the key constituents in intelligent packaging is a colorimetric oxygen indicator, which is widely used to detect oxygen gas involved in food spoilage by means of a color change. Traditional oxygen indicators consisting of redox dyes and strong reducing agents have two major problems: they must be manufactured and stored under anaerobic conditions because air depletes the reductant, and their components are synthetic and toxic. To address both of these serious problems, we have developed a natural component-based oxygen indicator characterized by in-pack activation. The conventional oxygen indicator composed of synthetic and artificial components was redesigned using naturally occurring compounds (laccase, guaiacol, and cysteine). These natural components were physically separated into two compartments by a fragile barrier. Only when the barrier was broken were all of the components mixed and the function as an oxygen indicator was begun (i.e., in-pack activation). Depending on the component concentrations, the natural component-based oxygen indicator exhibited different response times and color differences. The rate of the color change was proportional to the oxygen concentration. This novel colorimetric oxygen indicator will contribute greatly to intelligent packaging for healthier and safer foods.

  7. Built-In Data-Flow Integration Testing in Large-Scale Component-Based Systems

    Science.gov (United States)

    Piel, Éric; Gonzalez-Sanchez, Alberto; Gross, Hans-Gerhard

    Modern large-scale component-based applications and service ecosystems are built following a number of different component models and architectural styles, such as the data-flow architectural style. In this style, each building block receives data from a previous one in the flow and sends output data to other components. This organisation expresses information flows adequately, and also favours decoupling between the components, leading to easier maintenance and quicker evolution of the system. Integration testing is a major means to ensure the quality of large systems. Their size and complexity, together with the fact that they are developed and maintained by several stake holders, make Built-In Testing (BIT) an attractive approach to manage their integration testing. However, so far no technique has been proposed that combines BIT and data-flow integration testing. We have introduced the notion of a virtual component in order to realize such a combination. It permits to define the behaviour of several components assembled to process a flow of data, using BIT. Test-cases are defined in a way that they are simple to write and flexible to adapt. We present two implementations of our proposed virtual component integration testing technique, and we extend our previous proposal to detect and handle errors in the definition by the user. The evaluation of the virtual component testing approach suggests that more issues can be detected in systems with data-flows than through other integration testing approaches.

  8. [Design of traditional Chinese medicines with antihypertensive components based on medicinal property combination modes].

    Science.gov (United States)

    Liao, Su-Fen; Yan, Su-Rong; Guo, Wei-Jia; Luo, Ji; Sun, Jing; Dong, Fang; Wang, Yun; Qiao, Yan-Jiang

    2014-07-01

    Multi-component traditional Chinese medicines are an innovative research mode for traditional Chinese medicines. Currently, there are many design methods for developing multi-component traditional Chinese medicines, but their common feature is the lack of effective connection of the traditional Chinese medicine theory. In this paper, the authors discussed the multi-component traditional Chinese medicine design methods based on medicinal property combination modes, provided the combination methods with the characteristics of traditional Chinese medicine for the prescription combinations, and proved its feasibly with hypertension cases.

  9. Optimal test intervals of standby components based on actual plant-specific data

    International Nuclear Information System (INIS)

    Jones, R.B.; Bickel, J.H.

    1987-01-01

    Based on standard reliability analysis techniques, both under testing and over testing affect the availability of standby components. If tests are performed too often, unavailability is increased since the equipment is being used excessively. Conversely if testing is performed too infrequently, the likelihood of component unavailability is also increased due to the formation of rust, heat or radiation damage, dirt infiltration, etc. Thus from a physical perspective, an optimal test interval should exist which minimizes unavailability. This paper illustrates the application of an unavailability model that calculates optimal testing intervals for components with a failure database. (orig./HSCH)

  10. Program information architecture/document hierarchy. [Information Management Systems, it's components and rationale

    Energy Technology Data Exchange (ETDEWEB)

    Woods, T.W.

    1991-09-01

    The Nuclear Waste Management System (NWMS) Management Systems Improvement Strategy (MSIS) (DOE 1990) requires that the information within the computer program and information management system be ordered into a precedence hierarchy for consistency. Therefore, the US Department of Energy (DOE). Office of Civilian Radioactive Waste Management (OCRWM) requested Westinghouse Hanford Company to develop a plan for NWMS program information which the MSIS calls a document hierarchy. This report provides the results of that effort and describes the management system as a program information architecture.'' 3 refs., 3 figs.

  11. Multi-Step Deep Reactive Ion Etching Fabrication Process for Silicon-Based Terahertz Components

    Science.gov (United States)

    Jung-Kubiak, Cecile (Inventor); Reck, Theodore (Inventor); Chattopadhyay, Goutam (Inventor); Perez, Jose Vicente Siles (Inventor); Lin, Robert H. (Inventor); Mehdi, Imran (Inventor); Lee, Choonsup (Inventor); Cooper, Ken B. (Inventor); Peralta, Alejandro (Inventor)

    2016-01-01

    A multi-step silicon etching process has been developed to fabricate silicon-based terahertz (THz) waveguide components. This technique provides precise dimensional control across multiple etch depths with batch processing capabilities. Nonlinear and passive components such as mixers and multipliers waveguides, hybrids, OMTs and twists have been fabricated and integrated into a small silicon package. This fabrication technique enables a wafer-stacking architecture to provide ultra-compact multi-pixel receiver front-ends in the THz range.

  12. Design of multi-tiered database application based on CORBA component in SDUV-FEL system

    International Nuclear Information System (INIS)

    Sun Xiaoying; Shen Liren; Dai Zhimin

    2004-01-01

    The drawback of usual two-tiered database architecture was analyzed and the Shanghai Deep Ultraviolet-Free Electron Laser database system under development was discussed. A project for realizing the multi-tiered database architecture based on common object request broker architecture (CORBA) component and middleware model constructed by C++ was presented. A magnet database was given to exhibit the design of the CORBA component. (authors)

  13. Optimization of basic parameters in temperature-programmed gas chromatographic separations of multi-component samples within a given time

    NARCIS (Netherlands)

    Repka, D.; Krupcik, J.; Brunovska, A.; Leclercq, P.A.; Rijks, J.A.

    1989-01-01

    A new procedure is introduced for the optimization of column peak capacity in a given time. The opitmization focuses on temperature-programmed operating conditions, notably the initial temperature and hold time, and the programming rate. Based conceptually upon Lagrange functions, experiments were

  14. Program for calculating multi-component high-intense ion beam transport

    International Nuclear Information System (INIS)

    Kazarinov, N.Yu.; Prejzendorf, V.A.

    1985-01-01

    The CANAL program for calculating transport of high-intense beams containing ions with different charges in a channel consisting of dipole magnets and quadrupole lenses is described. The equations determined by the method of distribution function momenta and describing coordinate variations of the local mass centres and r.m.s. transverse sizes of beams with different charges form the basis of the calculation. The program is adapted for the CDC-6500 and SM-4 computers. The program functioning is organized in the interactive mode permitting to vary the parameters of any channel element and quickly choose the optimum version in the course of calculation. The calculation time for the CDC-6500 computer for the 30-40 m channel at the integration step of 1 cm is about 1 min. The program is used for calculating the channel for the uranium ion beam injection from the collective accelerator into the heavy-ion synchrotron

  15. Shaking table test and dynamic response analysis of 3-D component base isolation system using multi-layer rubber bearings and coil springs

    Energy Technology Data Exchange (ETDEWEB)

    Tsutsumi, Hideaki; Yamada, Hiroyuki; Ebisawa, Katsumi; Shibata, Katsuyuki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Fujimoto, Shigeru [Toshiba Corp., Tokyo (Japan)

    2001-06-01

    Introduction of the base isolation technique into the seismic design of nuclear power plant components as well as buildings has been expected as one of the effective countermeasure to reduce the seismic force applied to components. A research program on the base isolation of nuclear components has been carried out at the Japan Atomic Energy Research Institute (JAERI) since 1991. A methodology and a computer code (EBISA: Equipment Base Isolation System Analysis) for evaluating the failure frequency of the nuclear component with the base isolation were developed. In addition, a test program, which is concerned with the above development, aiming at improvement of failure frequency analysis models in the code has been conducted since 1996 to investigate the dynamic behavior and to verify the effectiveness of component base isolation systems. Two base isolation test systems with different characteristics were fabricated and static and dynamic characteristics were measured by static loading and free vibration tests. One which consists of ball bearings and air springs was installed on the test bed to observe the dynamic response under natural earthquake motion. The effect of base isolation system has been observed under several earthquakes. Three-dimensional response and effect of base isolation of another system using multi-layer-rubber-bearings and coil springs has been investigated under various large earthquake motions by shaking table test. This report describes the results of the shaking table tests and dynamic response analysis. (author)

  16. Age-dependent risk-based methodology and its application to prioritization of nuclear power plant components and to maintenance for managing aging using PRAs

    International Nuclear Information System (INIS)

    Levy, I.S.; Vesely, W.E.

    1990-01-01

    This paper is based on a study to demonstrate several important ways that the age-dependent risk-based methodology developed by the Nuclear Plant Aging Research (NPAR) Program may be applied to resolving important issues related to the aging of nuclear power plant systems, structures, and components (SSCs). The study was sponsored by the NPAR Program of the Division of Engineering, Office of Nuclear Regulatory Research of the U.S. Nuclear Regulatory Commission (NRC). Initiated on the basis of a Users Need Request, the age-dependent risk-based methodology has been under development by the NPAR Program for several years. In this methodology, the time-dependent change in a component's risk contribution is the product of two factors: (1) the risk importance of the component (e.g., the change in its risk contribution when it is assumed to be totally unavailable to perform its intended safety function) and (2) the change in its unavailability with time. This change in the component's unavailability with time is a function of the component's aging rate and plant inspection and maintenance practices. The methodology permits evaluations of the age-dependent risk contributions from both single- and multiple-components. Principal results and conclusions generated by the methodology demonstrations are discussed

  17. 76 FR 39006 - Medicare Program; Hospital Inpatient Value-Based Purchasing Program; Correction

    Science.gov (United States)

    2011-07-05

    ... and 480 [CMS-3239-CN] RIN 0938-AQ55 Medicare Program; Hospital Inpatient Value-Based Purchasing... Value-Based Purchasing Program.'' DATES: Effective Date: These corrections are effective on July 1, 2011... for the hospital value-based purchasing program. Therefore, in section III. 6. and 7. of this notice...

  18. Feature selection for neural network based defect classification of ceramic components using high frequency ultrasound.

    Science.gov (United States)

    Kesharaju, Manasa; Nagarajah, Romesh

    2015-09-01

    The motivation for this research stems from a need for providing a non-destructive testing method capable of detecting and locating any defects and microstructural variations within armour ceramic components before issuing them to the soldiers who rely on them for their survival. The development of an automated ultrasonic inspection based classification system would make possible the checking of each ceramic component and immediately alert the operator about the presence of defects. Generally, in many classification problems a choice of features or dimensionality reduction is significant and simultaneously very difficult, as a substantial computational effort is required to evaluate possible feature subsets. In this research, a combination of artificial neural networks and genetic algorithms are used to optimize the feature subset used in classification of various defects in reaction-sintered silicon carbide ceramic components. Initially wavelet based feature extraction is implemented from the region of interest. An Artificial Neural Network classifier is employed to evaluate the performance of these features. Genetic Algorithm based feature selection is performed. Principal Component Analysis is a popular technique used for feature selection and is compared with the genetic algorithm based technique in terms of classification accuracy and selection of optimal number of features. The experimental results confirm that features identified by Principal Component Analysis lead to improved performance in terms of classification percentage with 96% than Genetic algorithm with 94%. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. Wavelet decomposition based principal component analysis for face recognition using MATLAB

    Science.gov (United States)

    Sharma, Mahesh Kumar; Sharma, Shashikant; Leeprechanon, Nopbhorn; Ranjan, Aashish

    2016-03-01

    For the realization of face recognition systems in the static as well as in the real time frame, algorithms such as principal component analysis, independent component analysis, linear discriminate analysis, neural networks and genetic algorithms are used for decades. This paper discusses an approach which is a wavelet decomposition based principal component analysis for face recognition. Principal component analysis is chosen over other algorithms due to its relative simplicity, efficiency, and robustness features. The term face recognition stands for identifying a person from his facial gestures and having resemblance with factor analysis in some sense, i.e. extraction of the principal component of an image. Principal component analysis is subjected to some drawbacks, mainly the poor discriminatory power and the large computational load in finding eigenvectors, in particular. These drawbacks can be greatly reduced by combining both wavelet transform decomposition for feature extraction and principal component analysis for pattern representation and classification together, by analyzing the facial gestures into space and time domain, where, frequency and time are used interchangeably. From the experimental results, it is envisaged that this face recognition method has made a significant percentage improvement in recognition rate as well as having a better computational efficiency.

  20. Changes in selected physical, motor performance and anthropometric components of university-level rugby players after one microcycle of a combined rugby conditioning and plyometric training program.

    Science.gov (United States)

    Pienaar, Cindy; Coetzee, Ben

    2013-02-01

    The purpose of this study was to determine the effects of a microcycle (4 weeks) combined rugby conditioning plyometric compared with a nonplyometric rugby conditioning program on selected physical and motor performance components and anthropometric measurements of university-level rugby players. Players (18.94 ± 0.40 years) were assigned to either a control (n = 16) or experimental group (n = 19) from the U/19 rugby teams of the North-West University (South Africa). Twenty-six direct and indirect anthropometric measurements were taken, and the players performed a battery of 5 physical and motor performance tests before and after a microcycle (4 week) combined rugby conditioning plyometric (experimental group) and a nonplyometric rugby conditioning program (control group). The dependent t-test results showed that the control group's upper-body explosive power decreased significantly, whereas the stature, skeletal mass, and femur breadth increased significantly from pre- to posttesting. The experimental group showed significant increases in wrist breadth, speed over 20 m, agility, and power and work measurements of the Wingate anaerobic test (WAnT). Despite these results, the independent t-test revealed that speed over 20 m, average power output at 20 seconds, relative work of the WAnT, and agility were the only components of the experimental group that improved significantly more than the control group. A microcycle combined rugby conditioning plyometric program therefore leads to significantly bigger changes in selected physical and motor performance components of university-level rugby players than a nonplyometric rugby conditioning program alone. Based on these findings, coaches and sport scientists should implement 3 weekly combined rugby conditioning plyometric programs in rugby players' training regimens to improve the players' speed, agility, and power.

  1. Biochemical component identification by plasmonic improved whispering gallery mode optical resonance based sensor

    Science.gov (United States)

    Saetchnikov, Vladimir A.; Tcherniavskaia, Elina A.; Saetchnikov, Anton V.; Schweiger, Gustav; Ostendorf, Andreas

    2014-05-01

    Experimental data on detection and identification of variety of biochemical agents, such as proteins, microelements, antibiotic of different generation etc. in both single and multi component solutions under varied in wide range concentration analyzed on the light scattering parameters of whispering gallery mode optical resonance based sensor are represented. Multiplexing on parameters and components has been realized using developed fluidic sensor cell with fixed in adhesive layer dielectric microspheres and data processing. Biochemical component identification has been performed by developed network analysis techniques. Developed approach is demonstrated to be applicable both for single agent and for multi component biochemical analysis. Novel technique based on optical resonance on microring structures, plasmon resonance and identification tools has been developed. To improve a sensitivity of microring structures microspheres fixed by adhesive had been treated previously by gold nanoparticle solution. Another technique used thin film gold layers deposited on the substrate below adhesive. Both biomolecule and nanoparticle injections caused considerable changes of optical resonance spectra. Plasmonic gold layers under optimized thickness also improve parameters of optical resonance spectra. Biochemical component identification has been also performed by developed network analysis techniques both for single and for multi component solution. So advantages of plasmon enhancing optical microcavity resonance with multiparameter identification tools is used for development of a new platform for ultra sensitive label-free biomedical sensor.

  2. Component-Based Development of Runtime Observers in the COMDES Framework

    DEFF Research Database (Denmark)

    Guan, Wei; Li, Gang; Angelov, Christo K.

    2013-01-01

    against formally specified properties. This paper presents a component-based design method for runtime observers in the context of COMDES framework—a component-based framework for distributed embedded system and its supporting tools. Therefore, runtime verification is facilitated by model......Formal verification methods, such as exhaustive model checking, are often infeasible because of high computational complexity. Runtime observers (monitors) provide an alternative, light-weight verification method, which offers a non-exhaustive but still feasible approach to monitor system behavior...

  3. Prognostic Health Monitoring System: Component Selection Based on Risk Criteria and Economic Benefit Assessment

    International Nuclear Information System (INIS)

    Pham, Binh T.; Agarwal, Vivek; Lybeck, Nancy J.; Tawfik, Magdy S.

    2012-01-01

    Prognostic health monitoring (PHM) is a proactive approach to monitor the ability of structures, systems, and components (SSCs) to withstand structural, thermal, and chemical loadings over the SSCs planned service lifespan. The current efforts to extend the operational license lifetime of the aging fleet of U.S. nuclear power plants from 40 to 60 years and beyond can benefit from a systematic application of PHM technology. Implementing a PHM system would strengthen the safety of nuclear power plants, reduce plant outage time, and reduce operation and maintenance costs. However, a nuclear power plant has thousands of SSCs, so implementing a PHM system that covers all SSCs requires careful planning and prioritization. This paper therefore focuses on a component selection that is based on the analysis of a component's failure probability, risk, and cost. Ultimately, the decision on component selection depends on the overall economical benefits arising from safety and operational considerations associated with implementing the PHM system. (author)

  4. Condition Based Prognostics of Passive Components - A New Era for Nuclear Power Plant Life Management

    International Nuclear Information System (INIS)

    Bakhtiari, S.; Mohanty, S.; Prokofiev, I.; Tregoning, R.

    2012-01-01

    As part of a research project sponsored by the U.S. NRC, Argonne National Laboratory (ANL) conducted scoping studies to identify viable and promising sensors and techniques for in-situ inspection and real-time monitoring of degradation in nuclear power plant (NPP) systems, structures, and components (SSC). Significant advances have been made over the past two decades toward development of online monitoring (OLM) techniques for detection, diagnostics, and prognostics of degradation in active nuclear power plant (NPP) components (e.g., pumps, valves). However, early detection of damage and degradation in safety-critical passive components, (e.g. piping, tubing pressure vessel), is challenging, and will likely remain so for the foreseeable future. Ensuring the structural integrity of the reactor pressure vessel (RPV) and piping systems in particular is a prerequisite to long term safe operation of NPPs. The current practice is to implement inservice inspection (ISI) and preventive maintenance programs. While these programs have generally been successful, they are limited in that information is only obtained during plant outages. Additionally, these inspections, often the critical path in the outage schedule, are costly, time consuming, and involve potentially high dose to nondestructive examination/evaluation (NDE) personnel. A viable plant-wide on-line structural health monitoring program for continuous and automatic monitoring of critical SSCs could be a more effective approach for guarding against unexpected failures. Specifically, OLM information about the current condition of the SSCs could be input to an online prognostics (OLP) system to forecast their remaining useful life in real time. This paper provides an overview of scoping studies performed at ANL on assessing the viability of OLM and OLP systems for real time and automated monitoring and remaining of condition and the remaining useful life of passive components in NPPs. (author)

  5. Components Needed for the Design of a Sustainable Career and Technical Education Program

    Science.gov (United States)

    Lassiter, Vann Mizzelle

    2012-01-01

    As education has changed to meet the needs of society and has been shaped by the enactment of new laws, various aspects included under the massive umbrella of education have also changed to maintain momentum One such educational program is career and technical education (CTE). Changes to CTE have been made to continually meet the needs of all…

  6. 40 CFR 1033.645 - Non-OEM component certification program.

    Science.gov (United States)

    2010-07-01

    ... program. 1033.645 Section 1033.645 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...) Pistons. (iii) Piston rings. (iv) Heads (v) Fuel injectors. (vi) Turbochargers (vii) Aftercoolers and... that fails. You may choose to accept that your part is causing an emission problem rather than...

  7. Systematic Evaluation Strategies for Innovative Programs in Health Professions Education: Need, Function and Components.

    Science.gov (United States)

    Taft, Thomas B., Jr.; Logan, Nelson S.

    As change occurs in various health sciences programs, evaluational strategies should be developed so that adaptive decisions may be made. Evaluation models taking into account inputs, methodology, and outputs (Stake, 1967, and Astin and Panes, 1971) need examination. Alternative measurement instruments for formative and summative evaluations,…

  8. Constraint-based component-modeling for knowledge-based design

    Science.gov (United States)

    Kolb, Mark A.

    1992-01-01

    The paper describes the application of various advanced programming techniques derived from artificial intelligence research to the development of flexible design tools for conceptual design. Special attention is given to two techniques which appear to be readily applicable to such design tools: the constraint propagation technique and the object-oriented programming. The implementation of these techniques in a prototype computer tool, Rubber Airplane, is described.

  9. Design Optimization Method for Composite Components Based on Moment Reliability-Sensitivity Criteria

    Science.gov (United States)

    Sun, Zhigang; Wang, Changxi; Niu, Xuming; Song, Yingdong

    2017-08-01

    In this paper, a Reliability-Sensitivity Based Design Optimization (RSBDO) methodology for the design of the ceramic matrix composites (CMCs) components has been proposed. A practical and efficient method for reliability analysis and sensitivity analysis of complex components with arbitrary distribution parameters are investigated by using the perturbation method, the respond surface method, the Edgeworth series and the sensitivity analysis approach. The RSBDO methodology is then established by incorporating sensitivity calculation model into RBDO methodology. Finally, the proposed RSBDO methodology is applied to the design of the CMCs components. By comparing with Monte Carlo simulation, the numerical results demonstrate that the proposed methodology provides an accurate, convergent and computationally efficient method for reliability-analysis based finite element modeling engineering practice.

  10. Components installation. Scheduling techniques applied at Framatome for the French nuclear program

    International Nuclear Information System (INIS)

    Cremese, G.

    1982-09-01

    The first scheduling objective is a timely delivery of heavy components manufactured by FRAMATOME factories: reactor vessel, steam generators and pressurizer. The second scheduling function is the preparation and updating of overall and detailed schedules for the coordination and follow-up of: design activities, progress at equipment suppliers, construction and erection activities of sub-contractors, test and start-up tasks by FRAMATOME and customer teams, and maintenance operations by FRAMATOME teams. I shall first describe the schedules for the contract first unit then show how the following units of the contract are scheduled in their turn

  11. Integrating Gender into World Bank Financed Transport Programs : Component 1. Case Study Summary and Final Report

    OpenAIRE

    IC Net

    2004-01-01

    The World Bank in November 2001 commissioned IC Net Limited of Japan to carry out a study titled 'Integrating Gender into World Bank Financed Transport Programs' in accord with the terms of reference (TOR) issued in June 2001. The study was financed by a grant from the Japanese Large Studies Trust Fund. The contract came into effect on 15 December 2001 and covers the period to 15 June 2004...

  12. Model of the fine-grain component of martian soil based on Viking lander data

    International Nuclear Information System (INIS)

    Nussinov, M.D.; Chernyak, Y.B.; Ettinger, J.L.

    1978-01-01

    A model of the fine-grain component of the Martian soil is proposed. The model is based on well-known physical phenomena, and enables an explanation of the evolution of the gases released in the GEX (gas exchange experiments) and GCMS (gas chromatography-mass spectrometer experiments) of the Viking landers. (author)

  13. Efficient real time OD matrix estimation based on principal component analysis

    NARCIS (Netherlands)

    Djukic, T.; Flötteröd, G.; Van Lint, H.; Hoogendoorn, S.P.

    2012-01-01

    In this paper we explore the idea of dimensionality reduction and approximation of OD demand based on principal component analysis (PCA). First, we show how we can apply PCA to linearly transform the high dimensional OD matrices into the lower dimensional space without significant loss of accuracy.

  14. Entropy-based automated classification of independent components separated from fMCG

    International Nuclear Information System (INIS)

    Comani, S; Srinivasan, V; Alleva, G; Romani, G L

    2007-01-01

    Fetal magnetocardiography (fMCG) is a noninvasive technique suitable for the prenatal diagnosis of the fetal heart function. Reliable fetal cardiac signals can be reconstructed from multi-channel fMCG recordings by means of independent component analysis (ICA). However, the identification of the separated components is usually accomplished by visual inspection. This paper discusses a novel automated system based on entropy estimators, namely approximate entropy (ApEn) and sample entropy (SampEn), for the classification of independent components (ICs). The system was validated on 40 fMCG datasets of normal fetuses with the gestational age ranging from 22 to 37 weeks. Both ApEn and SampEn were able to measure the stability and predictability of the physiological signals separated with ICA, and the entropy values of the three categories were significantly different at p <0.01. The system performances were compared with those of a method based on the analysis of the time and frequency content of the components. The outcomes of this study showed a superior performance of the entropy-based system, in particular for early gestation, with an overall ICs detection rate of 98.75% and 97.92% for ApEn and SampEn respectively, as against a value of 94.50% obtained with the time-frequency-based system. (note)

  15. Prototypic implementations of the building block for component based open Hypermedia systems (BB/CB-OHSs)

    DEFF Research Database (Denmark)

    Mohamed, Omer I. Eldai

    2005-01-01

    In this paper we describe the prototypic implementations of the BuildingBlock (BB/CB-OHSs) that proposed to address some of the Component-based Open Hypermedia Systems (CB-OHSs) issues, including distribution and interoperability [4, 11, 12]. Four service implementations were described below. The...

  16. A model for determining condition-based maintenance policies for deteriorating multi-component systems

    NARCIS (Netherlands)

    Hontelez, J.A.M.; Wijnmalen, D.J.D.

    1993-01-01

    We discuss a method to determine strategies for preventive maintenance of systems consisting of gradually deteriorating components. A model has been developed to compute not only the range of conditions inducing a repair action, but also inspection moments based on the last known condition value so

  17. A model-based software development methodology for high-end automotive components

    NARCIS (Netherlands)

    Ravanan, Mahmoud

    2014-01-01

    This report provides a model-based software development methodology for high-end automotive components. The V-model is used as a process model throughout the development of the software platform. It offers a framework that simplifies the relation between requirements, design, implementation,

  18. Development of component reliability data for PSA and risk based management in Japan

    International Nuclear Information System (INIS)

    Yoshihiro Tomioka; Mitsumasa Hirano; Shunsuke Kondo

    1997-01-01

    The author presents the outline of development of the component reliability data for PSA and risk based management in Japan. In the first part following the introduction, the development process is described. The next part describes issues discussed in the course of the development, which are treatment of zero failure data, error factor, estimation of unavailable failure rate and integral test

  19. A stable systemic risk ranking in China's banking sector: Based on principal component analysis

    Science.gov (United States)

    Fang, Libing; Xiao, Binqing; Yu, Honghai; You, Qixing

    2018-02-01

    In this paper, we compare five popular systemic risk rankings, and apply principal component analysis (PCA) model to provide a stable systemic risk ranking for the Chinese banking sector. Our empirical results indicate that five methods suggest vastly different systemic risk rankings for the same bank, while the combined systemic risk measure based on PCA provides a reliable ranking. Furthermore, according to factor loadings of the first component, PCA combined ranking is mainly based on fundamentals instead of market price data. We clearly find that price-based rankings are not as practical a method as fundamentals-based ones. This PCA combined ranking directly shows systemic risk contributions of each bank for banking supervision purpose and reminds banks to prevent and cope with the financial crisis in advance.

  20. Gas chromatography/mass spectrometry based component profiling and quality prediction for Japanese sake.

    Science.gov (United States)

    Mimura, Natsuki; Isogai, Atsuko; Iwashita, Kazuhiro; Bamba, Takeshi; Fukusaki, Eiichiro

    2014-10-01

    Sake is a Japanese traditional alcoholic beverage, which is produced by simultaneous saccharification and alcohol fermentation of polished and steamed rice by Aspergillus oryzae and Saccharomyces cerevisiae. About 300 compounds have been identified in sake, and the contribution of individual components to the sake flavor has been examined at the same time. However, only a few compounds could explain the characteristics alone and most of the attributes still remain unclear. The purpose of this study was to examine the relationship between the component profile and the attributes of sake. Gas chromatography coupled with mass spectrometry (GC/MS)-based non-targeted analysis was employed to obtain the low molecular weight component profile of Japanese sake including both nonvolatile and volatile compounds. Sake attributes and overall quality were assessed by analytical descriptive sensory test and the prediction model of the sensory score from the component profile was constructed by means of orthogonal projections to latent structures (OPLS) regression analysis. Our results showed that 12 sake attributes [ginjo-ka (aroma of premium ginjo sake), grassy/aldehydic odor, sweet aroma/caramel/burnt odor, sulfury odor, sour taste, umami, bitter taste, body, amakara (dryness), aftertaste, pungent/smoothness and appearance] and overall quality were accurately explained by component profiles. In addition, we were able to select statistically significant components according to variable importance on projection (VIP). Our methodology clarified the correlation between sake attribute and 200 low molecular components and presented the importance of each component thus, providing new insights to the flavor study of sake. Copyright © 2014 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  1. Independent component analysis based digital signal processing in coherent optical fiber communication systems

    Science.gov (United States)

    Li, Xiang; Luo, Ming; Qiu, Ying; Alphones, Arokiaswami; Zhong, Wen-De; Yu, Changyuan; Yang, Qi

    2018-02-01

    In this paper, channel equalization techniques for coherent optical fiber transmission systems based on independent component analysis (ICA) are reviewed. The principle of ICA for blind source separation is introduced. The ICA based channel equalization after both single-mode fiber and few-mode fiber transmission for single-carrier and orthogonal frequency division multiplexing (OFDM) modulation formats are investigated, respectively. The performance comparisons with conventional channel equalization techniques are discussed.

  2. A Theory Based Introductory Programming Course

    DEFF Research Database (Denmark)

    Hansen, Michael Reichhardt; Kristensen, Jens Thyge; Rischel, Hans

    1999-01-01

    This paper presents an introductory programming course designed to teach programming as an intellectual activity. The course emphasizes understandable concepts which can be useful in designing programs, while the oddities of today's technology are considered of secondary importance. An important...... goal is to fight the trial-and-error approach to programming which is a result of the students battles with horribly designed and documented systems and languages prior to their studies at university. Instead, the authors strive for giving the students a good experience of programming as a systematic......, intellectual activity where the solution of a programming problem can be described in an understandable way. The approach is illustrated by an example which is a commented solution of a problem posed to the students in the course....

  3. Risk-based inservice testing program modifications at Palo Verde nuclear generating station

    Energy Technology Data Exchange (ETDEWEB)

    Knauf, S.; Lindenlaub, B.; Linthicum, R.

    1996-12-01

    Arizona Public Service Company (APS) is investigating changes to the Palo Verde Inservice Testing (IST) Program that are intended to result in the reduction of the required test frequency for various valves in the American Society of Mechanical Engineers (ASME) Section XI IST program. The analytical techniques employed to select candidate valves and to demonstrate that these frequency reductions are acceptable are risk based. The results of the Palo Verde probabilistic risk assessment (PRA), updated in June 1994, and the risk significant determination performed as part of the implementation efforts for 10 CFR 50.65 (the maintenance rule) were used to select candidate valves for extended test intervals. Additional component level evaluations were conducted by an `expert panel.` The decision to pursue these changes was facilitated by the ASME Risk-Based Inservice Testing Research Task Force for which Palo Verde is participating as a pilot plant. The NRC`s increasing acceptance of cost beneficial licensing actions and risk-based submittals also provided incentive to seek these changes. Arizona Public Service is pursuing the risk-based IST program modification in order to reduce the unnecessary regulatory burden of the IST program through qualitative and quantitative analysis consistent with maintaining a high level of plant safety. The objectives of this project at Palo Verde are as follows: (1) Apply risk-based technologies to IST components to determine their risk significance (i.e., high or low). (2) Apply a combination of deterministic and risk-based methods to determine appropriate testing requirements for IST components including improvement of testing methods and frequency intervals for high-risk significant components. (3) Apply risk-based technologies to high-risk significant components identified by the {open_quotes}expert panel{close_quotes} and outside of the IST program to determine whether additional testing requirements are appropriate.

  4. Risk-based inservice testing program modifications at Palo Verde nuclear generating station

    International Nuclear Information System (INIS)

    Knauf, S.; Lindenlaub, B.; Linthicum, R.

    1996-01-01

    Arizona Public Service Company (APS) is investigating changes to the Palo Verde Inservice Testing (IST) Program that are intended to result in the reduction of the required test frequency for various valves in the American Society of Mechanical Engineers (ASME) Section XI IST program. The analytical techniques employed to select candidate valves and to demonstrate that these frequency reductions are acceptable are risk based. The results of the Palo Verde probabilistic risk assessment (PRA), updated in June 1994, and the risk significant determination performed as part of the implementation efforts for 10 CFR 50.65 (the maintenance rule) were used to select candidate valves for extended test intervals. Additional component level evaluations were conducted by an 'expert panel.' The decision to pursue these changes was facilitated by the ASME Risk-Based Inservice Testing Research Task Force for which Palo Verde is participating as a pilot plant. The NRC's increasing acceptance of cost beneficial licensing actions and risk-based submittals also provided incentive to seek these changes. Arizona Public Service is pursuing the risk-based IST program modification in order to reduce the unnecessary regulatory burden of the IST program through qualitative and quantitative analysis consistent with maintaining a high level of plant safety. The objectives of this project at Palo Verde are as follows: (1) Apply risk-based technologies to IST components to determine their risk significance (i.e., high or low). (2) Apply a combination of deterministic and risk-based methods to determine appropriate testing requirements for IST components including improvement of testing methods and frequency intervals for high-risk significant components. (3) Apply risk-based technologies to high-risk significant components identified by the open-quotes expert panelclose quotes and outside of the IST program to determine whether additional testing requirements are appropriate

  5. Environmental components of OCS policy committee recommendations regarding national oil spill prevention and response program

    International Nuclear Information System (INIS)

    Groat, C.G.; Thorman, J.

    1991-01-01

    The Exxon Valdez oil spill of March 24, 1989 resulted in thousands of pages of analytical reports assessing the environmental, organizational, legal, procedural, social, economic, and political aspects of the event. Even though the accident was a transportation incident, it had a major impact on the public and political perception of offshore oil operations. This caused the OCS Policy Committee, which advises the Secretary of the Interior and the Minerals Management Service on Outer Continental Shelf resource development and environmental matters, to undertake a review of the reports for the purpose of developing recommendations to the secretary for improvements in OCS operations that would insure maximum efforts to prevent spills and optimal ability to deal with any that occur. The Committee felt strongly that 'a credible national spill prevention and response program from both OCS and non-OCS oil spills in the marine environment is needed to create the political climate for a viable OCS program.' The report of the Committee described eight essential elements of this program; four of these focused on the environmental aspects of oil spills, calling for (1) adequate characterization of the marine and coastal environment, including both information and analysis, accessible to decision makers, (2) the capacity to restore economic and environmental resources as quickly as possible if damage occurs, (3) a mechanism for research on oil spill impacts, and (4) a meaningful role for all interested and responsible parties, including the public, in as many of these activities as possible, from spill prevention and contingency planning to environmental oversight of ongoing operations and participation in clean-up and restoration activities

  6. Postabortion Care: 20 Years of Strong Evidence on Emergency Treatment, Family Planning, and Other Programming Components.

    Science.gov (United States)

    Huber, Douglas; Curtis, Carolyn; Irani, Laili; Pappa, Sara; Arrington, Lauren

    2016-09-28

    Worldwide 75 million women need postabortion care (PAC) services each year following safe or unsafe induced abortions and miscarriages. We reviewed more than 550 studies on PAC published between 1994 and 2013 in the peer-reviewed and gray literature, covering emergency treatment, postabortion family planning, organization of services, and related topics that impact practices and health outcomes, particularly in the Global South. In this article, we present findings from studies with strong evidence that have major implications for programs and practice. For example, vacuum aspiration reduced morbidity, costs, and time in comparison to sharp curettage. Misoprostol 400 mcg sublingually or 600 mcg orally achieved 89% to 99% complete evacuation rates within 2 weeks in multiple studies and was comparable in effectiveness, safety, and acceptability to manual vacuum aspiration. Misoprostol was safely introduced in several PAC programs through mid-level providers, extending services to secondary hospitals and primary health centers. In multiple studies, postabortion family planning uptake before discharge increased by 30-70 percentage points within 1-3 years of strengthening postabortion family planning services; in some cases, increases up to 60 percentage points in 4 months were achieved. Immediate postabortion contraceptive acceptance increased on average from 32% before the interventions to 69% post-intervention. Several studies found that women receiving immediate postabortion intrauterine devices and implants had fewer unintended pregnancies and repeat abortions than those who were offered delayed insertions. Postabortion family planning is endorsed by the professional organizations of obstetricians/gynecologists, midwives, and nurses as a standard of practice; major donors agree, and governments should be encouraged to provide universal access to postabortion family planning. Important program recommendations include offering all postabortion women family planning

  7. Optimal pattern synthesis for speech recognition based on principal component analysis

    Science.gov (United States)

    Korsun, O. N.; Poliyev, A. V.

    2018-02-01

    The algorithm for building an optimal pattern for the purpose of automatic speech recognition, which increases the probability of correct recognition, is developed and presented in this work. The optimal pattern forming is based on the decomposition of an initial pattern to principal components, which enables to reduce the dimension of multi-parameter optimization problem. At the next step the training samples are introduced and the optimal estimates for principal components decomposition coefficients are obtained by a numeric parameter optimization algorithm. Finally, we consider the experiment results that show the improvement in speech recognition introduced by the proposed optimization algorithm.

  8. DOOCS patterns, reusable software components for FPGA based RF GUN field controller

    International Nuclear Information System (INIS)

    Pucyk, P.

    2006-01-01

    Modern accelerator technology combines software and hardware solutions to provide distributed, high efficiency digital systems for High Energy Physics experiments. Providing flexible, maintainable software is crucial for ensuring high availability of the whole system. In order to fulfil all these requirements, appropriate design and development techniques have to be used. Software patterns are well known solution for common programming issues, providing proven development paradigms, which can help to avoid many design issues. DOOCS patterns introduces new concepts of reusable software components for control system algorithms development and implementation in DOOCS framework. Chosen patterns have been described and usage examples have been presented in this paper. (orig.)

  9. DOOCS patterns, reusable software components for FPGA based RF GUN field controller

    Energy Technology Data Exchange (ETDEWEB)

    Pucyk, P. [Institute of Electronic Systems, Warsaw (Poland)

    2006-07-01

    Modern accelerator technology combines software and hardware solutions to provide distributed, high efficiency digital systems for High Energy Physics experiments. Providing flexible, maintainable software is crucial for ensuring high availability of the whole system. In order to fulfil all these requirements, appropriate design and development techniques have to be used. Software patterns are well known solution for common programming issues, providing proven development paradigms, which can help to avoid many design issues. DOOCS patterns introduces new concepts of reusable software components for control system algorithms development and implementation in DOOCS framework. Chosen patterns have been described and usage examples have been presented in this paper. (orig.)

  10. Applications of ultrasonic phased array technique during fabrication of nuclear tubing and other components for the Indian nuclear power program

    International Nuclear Information System (INIS)

    Kapoor, K.

    2015-01-01

    Ultrasonic phased array technique has been applied in fabrication of nuclear fuel and structural at NFC. The integrity of the nuclear fuel and structural components is most crucial as they are exposed to severe environment during operation leading to rapid degradation of its properties during its lifecycle. Nuclear Fuel Complex has mandate for the fabrication of the nuclear fuel and core structurals for Indian PHWRs/BWR, sub-assemblies for the PFBR and steam generator tubing for PFBR and PHWRs which are the most critical materials for the Indian Nuclear Power program. NDE during fabrication of these materials is thus most crucial as it provides the confidence to the designer for safe operation during its lifetime. Many of these techniques have to be developed in-house to meet unique requirements of high sensitivity, resolution and shape of the components. Some of the advancements in the NDE during the fabrication include use of ultrasonic phased array which is detailed in this paper

  11. Reliability prediction system based on the failure rate model for electronic components

    International Nuclear Information System (INIS)

    Lee, Seung Woo; Lee, Hwa Ki

    2008-01-01

    Although many methodologies for predicting the reliability of electronic components have been developed, their reliability might be subjective according to a particular set of circumstances, and therefore it is not easy to quantify their reliability. Among the reliability prediction methods are the statistical analysis based method, the similarity analysis method based on an external failure rate database, and the method based on the physics-of-failure model. In this study, we developed a system by which the reliability of electronic components can be predicted by creating a system for the statistical analysis method of predicting reliability most easily. The failure rate models that were applied are MILHDBK- 217F N2, PRISM, and Telcordia (Bellcore), and these were compared with the general purpose system in order to validate the effectiveness of the developed system. Being able to predict the reliability of electronic components from the stage of design, the system that we have developed is expected to contribute to enhancing the reliability of electronic components

  12. The results of the program to change the cognitive component of social representations about the consequences of drug use in adolescents

    Directory of Open Access Journals (Sweden)

    M.P. Ryabov

    2013-07-01

    Full Text Available We argue the need of development and implementation of informational programs to focus drug prevention in adolescents due to the fact that the researchers neglected the distortion of knowledge and ideas about the consequences of drug use. The results of the program aimed at change the cognitive component of social representations of teenagers about taking drugs are presented. The program implemented in general education school is based on informational approach: a video is shown about the consequences of drug use on human health and life. The study involved 158 adolescents aged 15 to 18 years, students of 9th and 11th grades. As a result of the program, we recorded a significant reduction in the desire of teens to try drugs, their increased knowledge about the consequences of drug use, change in the hierarchy of consequences of initiation to drugs important for adolescents, and their life orientations. We identified and described age-and gender-specific impact of the program on the study parameters.

  13. Innovative Research on the Development of Game-based Tourism Information Services Using Component-based Software Engineering

    Directory of Open Access Journals (Sweden)

    Wei-Hsin Huang

    2018-02-01

    Full Text Available In recent years, a number of studies have been conducted exploring the potential of digital tour guides, that is, multimedia components (e.g., 2D graphic, 3D models, and sound effects that can be integrated into digital storytelling with location-based services. This study uses component-based software engineering to develop the content of game-based tourism information services. The results of this study are combined with 3D VR/AR technology to implement the digital 2D/3D interactive tour guide and show all the attractions’ information on a service platform for the gamification of cultural tourism. Nine kinds of game templates have been built in the component module. Five locations have completed indoor or external 3D VR real scenes and provide online visitors with a virtual tour of the indoor or outdoor attractions. The AR interactive work has three logos. The interactive digital guide includes animated tour guides, interactive guided tours, directions and interactive guides. Based on the usage analysis of the component databases built by this study, VR game types are suited to object-oriented game templates, such as the puzzle game template and the treasure hunt game template. Background music is the database component required for each game. The icons and cue tones are the most commonly used components in 2D graphics and sound effects, but the icons are gathered in different directions to approximate the shape of the component to be consistent. This study built a vivid story of a scene tour for online visitors to enhance the interactive digital guide. However, the developer can rapidly build new digital guides by rearranging the components of the modules to shorten the development time by taking advantage of the usage frequency of various databases that have been built by this study to effectively continue to build and expand the database components. Therefore, more game-based digital tour guides can be created to make better defined high

  14. Pixel-level multisensor image fusion based on matrix completion and robust principal component analysis

    Science.gov (United States)

    Wang, Zhuozheng; Deller, J. R.; Fleet, Blair D.

    2016-01-01

    Acquired digital images are often corrupted by a lack of camera focus, faulty illumination, or missing data. An algorithm is presented for fusion of multiple corrupted images of a scene using the lifting wavelet transform. The method employs adaptive fusion arithmetic based on matrix completion and self-adaptive regional variance estimation. Characteristics of the wavelet coefficients are used to adaptively select fusion rules. Robust principal component analysis is applied to low-frequency image components, and regional variance estimation is applied to high-frequency components. Experiments reveal that the method is effective for multifocus, visible-light, and infrared image fusion. Compared with traditional algorithms, the new algorithm not only increases the amount of preserved information and clarity but also improves robustness.

  15. A Component-Based Modeling and Validation Method for PLC Systems

    Directory of Open Access Journals (Sweden)

    Rui Wang

    2014-05-01

    Full Text Available Programmable logic controllers (PLCs are complex embedded systems that are widely used in industry. This paper presents a component-based modeling and validation method for PLC systems using the behavior-interaction-priority (BIP framework. We designed a general system architecture and a component library for a type of device control system. The control software and hardware of the environment were all modeled as BIP components. System requirements were formalized as monitors. Simulation was carried out to validate the system model. A realistic example from industry of the gates control system was employed to illustrate our strategies. We found a couple of design errors during the simulation, which helped us to improve the dependability of the original systems. The results of experiment demonstrated the effectiveness of our approach.

  16. Fault detection in nonlinear chemical processes based on kernel entropy component analysis and angular structure

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Qingchao; Yan, Xuefeng; Lv, Zhaomin; Guo, Meijin [East China University of Science and Technology, Shanghai (China)

    2013-06-15

    Considering that kernel entropy component analysis (KECA) is a promising new method of nonlinear data transformation and dimensionality reduction, a KECA based method is proposed for nonlinear chemical process monitoring. In this method, an angle-based statistic is designed because KECA reveals structure related to the Renyi entropy of input space data set, and the transformed data sets are produced with a distinct angle-based structure. Based on the angle difference between normal status and current sample data, the current status can be monitored effectively. And, the confidence limit of the angle-based statistics is determined by kernel density estimation based on sample data of the normal status. The effectiveness of the proposed method is demonstrated by case studies on both a numerical process and a simulated continuous stirred tank reactor (CSTR) process. The KECA based method can be an effective method for nonlinear chemical process monitoring.

  17. Fault detection in nonlinear chemical processes based on kernel entropy component analysis and angular structure

    International Nuclear Information System (INIS)

    Jiang, Qingchao; Yan, Xuefeng; Lv, Zhaomin; Guo, Meijin

    2013-01-01

    Considering that kernel entropy component analysis (KECA) is a promising new method of nonlinear data transformation and dimensionality reduction, a KECA based method is proposed for nonlinear chemical process monitoring. In this method, an angle-based statistic is designed because KECA reveals structure related to the Renyi entropy of input space data set, and the transformed data sets are produced with a distinct angle-based structure. Based on the angle difference between normal status and current sample data, the current status can be monitored effectively. And, the confidence limit of the angle-based statistics is determined by kernel density estimation based on sample data of the normal status. The effectiveness of the proposed method is demonstrated by case studies on both a numerical process and a simulated continuous stirred tank reactor (CSTR) process. The KECA based method can be an effective method for nonlinear chemical process monitoring

  18. Physics-Based Stress Corrosion Cracking Component Reliability Model cast in an R7-Compatible Cumulative Damage Framework

    Energy Technology Data Exchange (ETDEWEB)

    Unwin, Stephen D.; Lowry, Peter P.; Layton, Robert F.; Toloczko, Mychailo B.; Johnson, Kenneth I.; Sanborn, Scott E.

    2011-07-01

    This is a working report drafted under the Risk-Informed Safety Margin Characterization pathway of the Light Water Reactor Sustainability Program, describing statistical models of passives component reliabilities.

  19. Primary prevention of metabolic syndrome in the community using an evidence-based exercise program.

    Science.gov (United States)

    Dalleck, Lance C; Van Guilder, Gary P; Quinn, Esther M; Bredle, Don L

    2013-10-01

    The purpose of the present study was to examine the effectiveness of a community-based exercise program to lower metabolic syndrome (MetS) risk factors. MetS components were retrospectively analyzed in 332 adults (190 women, 142 men) before and after a 14-week supervised community exercise program between January 2007 and May 2012 at the University of Wisconsin-Eau Claire. Except for total cholesterol, all health outcome variables, including the 5 MetS components, improved following community exercise. Individuals having MetS decreased from 22.3% before participation to 13.5% at end (pexercise program is an effective method to reduce cardiovascular risk in adults by substantially decreasing the prevalence of MetS and its components. Greater volumes of exercise may increase the likelihood of MetS risk factor elimination. Copyright © 2013 Elsevier Inc. All rights reserved.

  20. A 2-dimensional RBS simulation program for studying the edges of multilayer integrated circuit components

    Energy Technology Data Exchange (ETDEWEB)

    Guo, X.S.; Lanford, W.A. (Dept. of Physics, State Univ. of New York, Albany, NY (USA)); Rodbell, K.P. (IBM East Fishkill, Hopewell Junction, NY (USA))

    1990-01-01

    A computer program has been written to simulate the RBS spectrum from a sample consisting of many parallel three-layer stripes on a substrate (e.g. Al/Hf/Al stripes on SiO{sub 2}). The simulated RBS spectrum depends on the thickness of the different layers, the width of the stripes, the angle of the stripe side wall, the ion beam angle, the detector angle and the size and position of the ion beam on the stripe. The simulation fits experimental data well and can be used to determine diffusion in horizontal directions. It also provides an accurate way of measuring the angle of the stripe side wall. (orig.).

  1. Health Games: A Key Component for the Evolution of Wellness Programs.

    Science.gov (United States)

    Lenihan, David

    2012-06-01

    Healthcare cost growth has been a major concern for both governments and employers. Considerable efforts have been made to "bend the trend" or find ways to control costs. At the highest levels, this has been the move from indemnity care models to managed care and then to consumer-directed health models using Healthcare Reimbursement Accounts and Healthcare Spending Accounts in plan designs. Accompanying this move in plan design has been an effort to get the consumer/patient/employee more engaged and responsible for his or her health expenditures, health decision-making, and activities. Consumers have gone through the phases of health being doctor-centric (indemnity care model), to health plan-centric (managed care models), to consumer-centric (consumer-directed health models). There is currently a need to incorporate wellness into the equation. Simply put, wellness is intended to keep people out of the health system by reducing the risk factors that would put them into the system in the first place. This includes things like smoking cessation, exercise, weight management, nutrition, and other factors over which individuals have a significant level of control over, as well as condition management such as medication adherence, and condition monitoring (such as glucose monitoring for diabetics). Wellness will become increasingly more common for major buyers, initially large self-funded employers and then health plans that will offer it as a part of their overall Plan Design and Administration services. Wellness initiatives will also be offered by Federal and State governments and will include programs for the elderly and at-risk populations as well as for the general population. The measure of success of wellness programs to actually "bend the trend" will be engagement. How large a piece of the population can be captured and retained will be the critical metric for success…and metrics require real data and will be used by the entire healthcare value-chain to measure

  2. THE ANALYSIS OF EFFECTIVENESS OF CORRECTIVE PROGRAM OF FORMING OF COMPONENTS OF PROFESSIONAL SELF-DEVELOPMENT OF FUTURE PRIMARY SCHOOL TEACHERS

    Directory of Open Access Journals (Sweden)

    Artem Smoliuk

    2017-07-01

    Full Text Available The analysis of effectiveness of corrective program of forming of components of professional self-development of future primary school teachers is made in the article. The methodological base of design of corrective program was the principles of systematic and genetic, personal and active, action approaches to the professional self-development, humanist theory of self- actualization and self-realization of the personality. The program, designed by author consisted of: diagnostic, forming and recovering, psychical and preventive and correctional, control blocks. In the psychical and preventive and correctional process the gaming technologies, which consist of numerous exercises and performed both individually and within groups, psychological actions and role games and quests, personality-oriented technologies of professional development were used. The conducted justification of effectiveness of corrective program showed, that the specially arranged events allowed to increase levels of such components of professional self-development of future primary school teachers as: need and motivational, reflexive and value and social-communicative. During the conducting of pedagogical correction the specially organized training as the addition to traditional educational forms were used. The objectives of such education are the following: the promotion of forming of subjective position of the personality about the professional promotion; the supporting of personal-professional development; the stimulating of upward professional mobility and career growth in the pedagogical activity; optimization of attitude to oneself as to the professional; the expansion of oriental level in the professional field; the actualization of personal resources in the professional self-development; help in passing of new professional status of future pedagogue; the prognostication of possible difficulties, which are related to the future pedagogical activity. Thus proved, that the

  3. Analyzing best practices in employee health management: how age, sex, and program components relate to employee engagement and health outcomes.

    Science.gov (United States)

    Terry, Paul E; Grossmeier, Jessica; Mangen, David J; Gingerich, Stefan B

    2013-04-01

    Examine the influence of employee health management (EHM) best practices on registration, participation, and health behavior change in telephone-based coaching programs. Individual health assessment data, EHM program data, and health coaching participation data were analyzed for associations with coaching program enrollment, active participation, and risk reduction. Multivariate analyses occurred at the individual (n = 205,672) and company levels (n = 55). Considerable differences were found in how age and sex impacted typical EHM evaluation metrics. Cash incentives for the health assessment were associated with more risk reduction for men than for women. Providing either a noncash or a benefits-integrated incentive for completing the health assessment, or a noncash incentive for lifestyle management, strengthened the relationship between age and risk reduction. In EHM programs, one size does not fit all. These results can help employers tailor engagement strategies for their specific population.

  4. A Component-Based Vocabulary-Extensible Sign Language Gesture Recognition Framework.

    Science.gov (United States)

    Wei, Shengjing; Chen, Xiang; Yang, Xidong; Cao, Shuai; Zhang, Xu

    2016-04-19

    Sign language recognition (SLR) can provide a helpful tool for the communication between the deaf and the external world. This paper proposed a component-based vocabulary extensible SLR framework using data from surface electromyographic (sEMG) sensors, accelerometers (ACC), and gyroscopes (GYRO). In this framework, a sign word was considered to be a combination of five common sign components, including hand shape, axis, orientation, rotation, and trajectory, and sign classification was implemented based on the recognition of five components. Especially, the proposed SLR framework consisted of two major parts. The first part was to obtain the component-based form of sign gestures and establish the code table of target sign gesture set using data from a reference subject. In the second part, which was designed for new users, component classifiers were trained using a training set suggested by the reference subject and the classification of unknown gestures was performed with a code matching method. Five subjects participated in this study and recognition experiments under different size of training sets were implemented on a target gesture set consisting of 110 frequently-used Chinese Sign Language (CSL) sign words. The experimental results demonstrated that the proposed framework can realize large-scale gesture set recognition with a small-scale training set. With the smallest training sets (containing about one-third gestures of the target gesture set) suggested by two reference subjects, (82.6 ± 13.2)% and (79.7 ± 13.4)% average recognition accuracy were obtained for 110 words respectively, and the average recognition accuracy climbed up to (88 ± 13.7)% and (86.3 ± 13.7)% when the training set included 50~60 gestures (about half of the target gesture set). The proposed framework can significantly reduce the user's training burden in large-scale gesture recognition, which will facilitate the implementation of a practical SLR system.

  5. A Component-Based Vocabulary-Extensible Sign Language Gesture Recognition Framework

    Directory of Open Access Journals (Sweden)

    Shengjing Wei

    2016-04-01

    Full Text Available Sign language recognition (SLR can provide a helpful tool for the communication between the deaf and the external world. This paper proposed a component-based vocabulary extensible SLR framework using data from surface electromyographic (sEMG sensors, accelerometers (ACC, and gyroscopes (GYRO. In this framework, a sign word was considered to be a combination of five common sign components, including hand shape, axis, orientation, rotation, and trajectory, and sign classification was implemented based on the recognition of five components. Especially, the proposed SLR framework consisted of two major parts. The first part was to obtain the component-based form of sign gestures and establish the code table of target sign gesture set using data from a reference subject. In the second part, which was designed for new users, component classifiers were trained using a training set suggested by the reference subject and the classification of unknown gestures was performed with a code matching method. Five subjects participated in this study and recognition experiments under different size of training sets were implemented on a target gesture set consisting of 110 frequently-used Chinese Sign Language (CSL sign words. The experimental results demonstrated that the proposed framework can realize large-scale gesture set recognition with a small-scale training set. With the smallest training sets (containing about one-third gestures of the target gesture set suggested by two reference subjects, (82.6 ± 13.2% and (79.7 ± 13.4% average recognition accuracy were obtained for 110 words respectively, and the average recognition accuracy climbed up to (88 ± 13.7% and (86.3 ± 13.7% when the training set included 50~60 gestures (about half of the target gesture set. The proposed framework can significantly reduce the user’s training burden in large-scale gesture recognition, which will facilitate the implementation of a practical SLR system.

  6. AXIOLOGICAL COMPONENT OF VOCATIONAL TRAINING (THE EXAMPLE OF BACHELOR PROGRAMS IN THE FIELD OF THE GARMENT INDUSTRY PRODUCTS DESIGN

    Directory of Open Access Journals (Sweden)

    Lyudmila V. Rosnovskaya

    2015-01-01

    Full Text Available The aim of the article is to review and study the significance of an axiological component and its mechanisms implementation for bachelor vocational training in the field of designing garment industry products.Methods. The methods involve theoretical analysis of philosophical, psychological and pedagogical literature, as well as modeling and classification methods.Scientific novelty and results. An independent axiological component based on structural and content analysis of a clothes designer’s professional work is identified; the content of this component is justified and determined. The substantive characteristics of clothes designer professional competencies are determined in terms of the axiological component. The education objectives aimed at forming the axiological component of Bachelors’ of garment design competencies are classified in correlation with the functions of training. Activity-related information and specifications necessary for values related to actual practice are identified, including channels and mechanisms of translation values in the vocational education process. A model of the educational situation is elaborated, which is proposed to be used as an orientation basis for designing specific educational situations, adequate to this or that kind of value experience. The dialogue activity is shown as the most favorable environment and a form of student activities organization in the development of emotionally-valuable experience.Practical significance. The article is supposed to be used while the training process for the garment industry and the fashion industry staff.

  7. Saul: Towards Declarative Learning Based Programming

    OpenAIRE

    Kordjamshidi, Parisa; Roth, Dan; Wu, Hao

    2015-01-01

    We present Saul, a new probabilistic programming language designed to address some of the shortcomings of programming languages that aim at advancing and simplifying the development of AI systems. Such languages need to interact with messy, naturally occurring data, to allow a programmer to specify what needs to be done at an appropriate level of abstraction rather than at the data level, to be developed on a solid theory that supports moving to and reasoning at this level of abstraction and,...

  8. Blind Separation of Acoustic Signals Combining SIMO-Model-Based Independent Component Analysis and Binary Masking

    Directory of Open Access Journals (Sweden)

    Hiekata Takashi

    2006-01-01

    Full Text Available A new two-stage blind source separation (BSS method for convolutive mixtures of speech is proposed, in which a single-input multiple-output (SIMO-model-based independent component analysis (ICA and a new SIMO-model-based binary masking are combined. SIMO-model-based ICA enables us to separate the mixed signals, not into monaural source signals but into SIMO-model-based signals from independent sources in their original form at the microphones. Thus, the separated signals of SIMO-model-based ICA can maintain the spatial qualities of each sound source. Owing to this attractive property, our novel SIMO-model-based binary masking can be applied to efficiently remove the residual interference components after SIMO-model-based ICA. The experimental results reveal that the separation performance can be considerably improved by the proposed method compared with that achieved by conventional BSS methods. In addition, the real-time implementation of the proposed BSS is illustrated.

  9. Future-based Static Analysis of Message Passing Programs

    Directory of Open Access Journals (Sweden)

    Wytse Oortwijn

    2016-06-01

    Full Text Available Message passing is widely used in industry to develop programs consisting of several distributed communicating components. Developing functionally correct message passing software is very challenging due to the concurrent nature of message exchanges. Nonetheless, many safety-critical applications rely on the message passing paradigm, including air traffic control systems and emergency services, which makes proving their correctness crucial. We focus on the modular verification of MPI programs by statically verifying concrete Java code. We use separation logic to reason about local correctness and define abstractions of the communication protocol in the process algebra used by mCRL2. We call these abstractions futures as they predict how components will interact during program execution. We establish a provable link between futures and program code and analyse the abstract futures via model checking to prove global correctness. Finally, we verify a leader election protocol to demonstrate our approach.

  10. Components and Outcomes of Internet-Based Interventions for Caregivers of Older Adults: Systematic Review.

    Science.gov (United States)

    Guay, Cassioppée; Auger, Claudine; Demers, Louise; Mortenson, W Ben; Miller, William C; Gélinas-Bronsard, Dominique; Ahmed, Sara

    2017-09-19

    When trying to access interventions to improve their well-being and quality of life, family caregivers face many challenges. Internet-based interventions provide new and accessible opportunities to remotely support them and can contribute to reducing their burden. However, little is known about the link existing between the components, the use of behavior change techniques, and the outcomes of these Internet-based interventions. This study aimed to provide an update on the best available evidence about the efficacy of Internet-based interventions for caregivers of older adults. Specifically, the components and the use of behavior change techniques and how they impact on the efficacy of the intervention were sought. A systematic review searched primary source studies published between 2000 and 2015. Included studies were scored with a high level of evidence by independent raters using the GRADE criteria and reported caregiver-specific outcomes about interventions delivered through the Internet for caregivers of people aged 50 years and older. A narrative synthesis identified intervention components (eg, content, multimedia use, interactive online activities, and provision of support), behavior change techniques, and caregiver outcomes (eg, effects on stressors, mediators, and psychological health). The risk of bias within the included studies was assessed. A total of 2338 articles were screened and 12 studies describing 10 Internet-based interventions were identified. Seven of these interventions led to statistically significant improvements in caregiver outcomes (eg, reducing depression or anxiety, n=4). These efficacious interventions used interactive components, such as online exercises and homework (n=4) or questionnaires on health status (n=2) and five of them incorporated remote human support, either by professionals or peers. The most frequently used behavior change techniques included in efficacious interventions were provision of social support (n=6) and

  11. Institutional blood glucose monitoring system for hospitalized patients: an integral component of the inpatient glucose control program.

    Science.gov (United States)

    Boaz, Mona; Landau, Zohar; Matas, Zipora; Wainstein, Julio

    2009-09-01

    The ability to measure patient blood glucose levels at bedside in hospitalized patients and to transmit those values to a central database enables and facilitates glucose control and follow-up and is an integral component in the care of the hospitalized diabetic patient. The goal of this study was to evaluate the performance of an institutional glucometer employed in the framework of the Program for the Treatment of the Hospitalized Diabetic Patient (PTHDP) at E. Wolfson Medical Center, Holon, Israel. As part of the program to facilitate glucose control in hospitalized diabetic patients, an institutional glucometer was employed that permits uploading of data from stands located in each inpatient department and downloading of that data to a central hospital-wide database. Blood glucose values from hospitalized diabetic patients were collected from August 2007 to October 2008. The inpatient glucose control program was introduced gradually beginning January 2008. During the follow-up period, more than 150,000 blood glucose measures were taken. Mean glucose was 195.7 +/- 99.12 mg/dl during the follow-up period. Blood glucose values declined from 206 +/- 105 prior to PTHDP (August 2007-December 2007) to 186 +/- 92 after its inception (January 2008-October 2008). The decline was associated significantly with time (r = 0.11, p < 0.0001). The prevalence of blood glucose values lower than 60 mg/dl was 1.48% [95% confidence interval (CI) 0.36%] prior to vs 1.55% (95% CI 0.37%) following implementation of the PTHDP. Concomitantly, a significant increase in the proportion of blood glucose values between 80 and 200 mg/dl was observed, from 55.5% prior to program initiation vs 61.6% after program initiation (p < 0.0001). The present study was designed to observe changes in institution-wide glucose values following implementation of the PTHDP. Information was extracted from the glucometer system itself. Because the aforementioned study was not a clinical trial, we cannot rule out

  12. Using Discrete Event Simulation for Programming Model Exploration at Extreme-Scale: Macroscale Components for the Structural Simulation Toolkit (SST).

    Energy Technology Data Exchange (ETDEWEB)

    Wilke, Jeremiah J [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Kenny, Joseph P. [Sandia National Laboratories (SNL-CA), Livermore, CA (United States)

    2015-02-01

    Discrete event simulation provides a powerful mechanism for designing and testing new extreme- scale programming models for high-performance computing. Rather than debug, run, and wait for results on an actual system, design can first iterate through a simulator. This is particularly useful when test beds cannot be used, i.e. to explore hardware or scales that do not yet exist or are inaccessible. Here we detail the macroscale components of the structural simulation toolkit (SST). Instead of depending on trace replay or state machines, the simulator is architected to execute real code on real software stacks. Our particular user-space threading framework allows massive scales to be simulated even on small clusters. The link between the discrete event core and the threading framework allows interesting performance metrics like call graphs to be collected from a simulated run. Performance analysis via simulation can thus become an important phase in extreme-scale programming model and runtime system design via the SST macroscale components.

  13. Economic-based design of engineering systems with degrading components using probabilistic loss of quality

    International Nuclear Information System (INIS)

    Son, Young Kap; Savage, Gordon J.; Chang, Seog Weon

    2007-01-01

    The allocation of means and tolerances to provide quality, functional reliability and performance reliability in engineering systems is a challenging problem. Traditional measures to help select the best means and tolerances include mean time to failure and its variance: however, they have some shortcomings. In this paper, a monetary measure based on present worth is invoked as a more inclusive metric. We consider the sum of the production cost and the expected loss of quality cost over a planned horizon at the customer's discount rates. Key to the approach is a probabilistic loss of quality cost that incorporates the cumulative distribution function that arises from time-variant distributions of system performance measures due to degrading components. The proposed design approach investigates both degradation and uncertainty in component. Moreover, it tries to obviate problems of current Taguchi's loss function-based design approaches. Case studies show the practicality and promise of the approach

  14. Refinement and verification in component-based model-driven design

    DEFF Research Database (Denmark)

    Chen, Zhenbang; Liu, Zhiming; Ravn, Anders Peter

    2009-01-01

    Modern software development is complex as it has to deal with many different and yet related aspects of applications. In practical software engineering this is now handled by a UML-like modelling approach in which different aspects are modelled by different notations. Component-based and object-o...... be integrated in computer-aided software engineering (CASE) tools for adding formally supported checking, transformation and generation facilities.......Modern software development is complex as it has to deal with many different and yet related aspects of applications. In practical software engineering this is now handled by a UML-like modelling approach in which different aspects are modelled by different notations. Component-based and object...

  15. Risk-based management of remaining life of power plant components

    International Nuclear Information System (INIS)

    Roos, E.; Jovanovic, A.S.; Maile, K.; Auerkari, P.

    1999-01-01

    The paper describes application of different modules of the MPA-System ALIAS in risk-based management of remaining life of power plant components. The system allows comprehensive coverage of all aspects of the remaining life management, including also the risk analysis and risk management. In addition, thanks to the modular character of the system it is also possible to implement new methods: In the case described here, a new (probabilistic) method for determination of the next inspection time for the components exposed to creep loading has been developed and implemented in the system. Practical application of the method has shown (a) that the mean values obtained by the method fall into the range of results obtained by other methods (based on expert knowledge), and (b) that it is possible to quantify the probability of aberration from the mean values. This in turn allows quantifying the additional risks linked to e.g. prolonging of inspection intervals. (orig.) [de

  16. Spectral network based on component cells under the SOPHIA European project

    Energy Technology Data Exchange (ETDEWEB)

    Núñez, Rubén, E-mail: ruben.nunez@ies-def.upm.es; Antón, Ignacio; Askins, Steve; Sala, Gabriel [Instituto de Energía Solar - Universidad Politécnica de Madrid, Ciudad Universitaria, 28040 Madrid (Spain); Domínguez, César; Voarino, Philippe [CEA-INES, 50 avenue du Lac Léman, 73375 Le Bourget-du-Lac (France); Steiner, Marc; Siefer, Gerald [Fraunhofer ISE, Heidenhofstr. 2, 79110 Freiburg (Germany); Fucci, Rafaelle; Roca, Franco [ENEA, P.le E.Fermi 1, Località Granatello, 80055 Portici (Italy); Minuto, Alessandro; Morabito, Paolo [RSE, Via Rubattino 54, 20134 Milan (Italy)

    2015-09-28

    In the frame of the European project SOPHIA, a spectral network based on component (also called isotypes) cells has been created. Among the members of this project, several spectral sensors based on component cells and collimating tubes, so-called spectroheliometers, were installed in the last years, allowing the collection of minute-resolution spectral data useful for CPV systems characterization across Europe. The use of spectroheliometers has been proved useful to establish the necessary spectral conditions to perform power rating of CPV modules and systems. If enough data in a given period of time is collected, ideally a year, it is possible to characterize spectrally the place where measurements are taken, in the same way that hours of annual irradiation can be estimated using a pyrheliometer.

  17. Effectiveness of a Core-Competency–based Program on Residents’ Learning and Experience

    Science.gov (United States)

    Charles, Lesley; Triscott, Jean; Dobbs, Bonnie; Tian, Peter George; Babenko, Oksana

    2016-01-01

    Background The Care of the Elderly (COE) Diploma Program is a six-to-twelve-month enhanced skills program taken after two years of core residency training in Family Medicine. In 2010, we developed and implemented a core-competency–based COE Diploma program (CC), in lieu of one based on learning objectives (LO). This study assessed the effectiveness of the core-competency–based program on residents’ learning and their training experience as compared to residents trained using learning objectives. Methods The data from the 2007–2013 COE residents were used in the study, with nine and eight residents trained in the LO and CC programs, respectively. Residents’ learning was measured using preceptors’ evaluations of residents’ skills/abilities throughout the program (118 evaluations in total). Residents’ rating of training experience was measured using the Graduate’s Questionnaire which residents completed after graduation. Results For residents’ learning, overall, there was no significant difference between the two programs. However, when examined as a function of the four CanMEDS roles, there were significant increases in the CC residents’ scores for two of the CanMEDS roles: Communicator/Collaborator/Manager and Scholar compared to residents in the LO program. With respect to residents’ training experience, seven out of ten program components were rated by the CC residents higher than by the LO residents. Conclusion The implementation of a COE CC program appears to facilitate resident learning and training experience. PMID:27403213

  18. Effectiveness of a Core-Competency-based Program on Residents' Learning and Experience.

    Science.gov (United States)

    Charles, Lesley; Triscott, Jean; Dobbs, Bonnie; Tian, Peter George; Babenko, Oksana

    2016-06-01

    The Care of the Elderly (COE) Diploma Program is a six-to-twelve-month enhanced skills program taken after two years of core residency training in Family Medicine. In 2010, we developed and implemented a core-competency-based COE Diploma program (CC), in lieu of one based on learning objectives (LO). This study assessed the effectiveness of the core-competency-based program on residents' learning and their training experience as compared to residents trained using learning objectives. The data from the 2007-2013 COE residents were used in the study, with nine and eight residents trained in the LO and CC programs, respectively. Residents' learning was measured using preceptors' evaluations of residents' skills/abilities throughout the program (118 evaluations in total). Residents' rating of training experience was measured using the Graduate's Questionnaire which residents completed after graduation. For residents' learning, overall, there was no significant difference between the two programs. However, when examined as a function of the four CanMEDS roles, there were significant increases in the CC residents' scores for two of the CanMEDS roles: Communicator/Collaborator/Manager and Scholar compared to residents in the LO program. With respect to residents' training experience, seven out of ten program components were rated by the CC residents higher than by the LO residents. The implementation of a COE CC program appears to facilitate resident learning and training experience.

  19. Protocol-Based Verification of Message-Passing Parallel Programs

    DEFF Research Database (Denmark)

    López-Acosta, Hugo-Andrés; Eduardo R. B. Marques, Eduardo R. B.; Martins, Francisco

    2015-01-01

    We present ParTypes, a type-based methodology for the verification of Message Passing Interface (MPI) programs written in the C programming language. The aim is to statically verify programs against protocol specifications, enforcing properties such as fidelity and absence of deadlocks. We develo...

  20. Development of a component centered fault monitoring and diagnosis knowledge based system for space power system

    Science.gov (United States)

    Lee, S. C.; Lollar, Louis F.

    1988-01-01

    The overall approach currently being taken in the development of AMPERES (Autonomously Managed Power System Extendable Real-time Expert System), a knowledge-based expert system for fault monitoring and diagnosis of space power systems, is discussed. The system architecture, knowledge representation, and fault monitoring and diagnosis strategy are examined. A 'component-centered' approach developed in this project is described. Critical issues requiring further study are identified.

  1. An Intuitionistic Fuzzy Methodology for Component-Based Software Reliability Optimization

    DEFF Research Database (Denmark)

    Madsen, Henrik; Grigore, Albeanu; Popenţiuvlǎdicescu, Florin

    2012-01-01

    Component-based software development is the current methodology facilitating agility in project management, software reuse in design and implementation, promoting quality and productivity, and increasing the reliability and performability. This paper illustrates the usage of intuitionistic fuzzy...... degree approach in modelling the quality of entities in imprecise software reliability computing in order to optimize management results. Intuitionistic fuzzy optimization algorithms are proposed to be used for complex software systems reliability optimization under various constraints....

  2. Temperature Programmed Desorption of Quench-condensed Krypton and Acetone in Air; Selective Concentration of Ultra-trace Gas Components.

    Science.gov (United States)

    Suzuki, Taku T; Sakaguchi, Isao

    2016-01-01

    Selective concentration of ultra-trace components in air-like gases has an important application in analyzing volatile organic compounds in the gas. In the present study, we examined quench-condensation of the sample gas on a ZnO substrate below 50 K followed by temperature programmed desorption (TPD) (low temperature TPD) as a selective gas concentration technique. We studied two specific gases in the normal air; krypton as an inert gas and acetone as a reactive gas. We evaluated the relationship between the operating condition of low temperature TPD and the lowest detection limit. In the case of krypton, we observed the selective concentration by exposing at 6 K followed by thermal desorption at about 60 K. On the other hand, no selectivity appeared for acetone although trace acetone was successfully concentrated. This is likely due to the solvent effect by a major component in the air, which is suggested to be water. We suggest that pre-condensation to remove the water component may improve the selectivity in the trace acetone analysis by low temperature TPD.

  3. Two-Component Structure of the Radio Source 0014+813 from VLBI Observations within the CONT14 Program

    Science.gov (United States)

    Titov, O. A.; Lopez, Yu. R.

    2018-03-01

    We consider a method of reconstructing the structure delay of extended radio sources without constructing their radio images. The residuals derived after the adjustment of geodetic VLBI observations are used for this purpose. We show that the simplest model of a radio source consisting of two point components can be represented by four parameters (the angular separation of the components, the mutual orientation relative to the poleward direction, the flux-density ratio, and the spectral index difference) that are determined for each baseline of a multi-baseline VLBI network. The efficiency of this approach is demonstrated by estimating the coordinates of the radio source 0014+813 observed during the two-week CONT14 program organized by the International VLBI Service (IVS) in May 2014. Large systematic deviations have been detected in the residuals of the observations for the radio source 0014+813. The averaged characteristics of the radio structure of 0014+813 at a frequency of 8.4 GHz can be calculated from these deviations. Our modeling using four parameters has confirmed that the source consists of two components at an angular separation of 0.5 mas in the north-south direction. Using the structure delay when adjusting the CONT14 observations leads to a correction of the average declination estimate for the radio source 0014+813 by 0.070 mas.

  4. Structural health monitoring of power plant components based on a local temperature measurement concept

    International Nuclear Information System (INIS)

    Rudolph, Juergen; Bergholz, S.; Hilpert, R.; Jouan, B.; Goetz, A.

    2012-01-01

    The fatigue assessment of power plant components based on fatigue monitoring approaches is an essential part of the integrity concept and modern lifetime management. It is comparable to structural health monitoring approaches in other engineering fields. The methods of fatigue evaluation of nuclear power plant components based on realistic thermal load data measured on the plant are addressed. In this context the Fast Fatigue Evaluation (FFE) and Detailed Fatigue Calculation (DFC) of nuclear power plant components are parts of the three staged approach to lifetime assessment and lifetime management of the AREVA Fatigue Concept (AFC). The three stages Simplified Fatigue Estimation (SFE), Fast Fatigue Evaluation (FFE) and Detailed Fatigue Calculation (DFC) are characterized by increasing calculation effort and decreasing degree of conservatism. Their application is case dependent. The quality of the fatigue lifetime assessment essentially depends on one hand on the fatigue model assumptions and on the other hand on the load data as the basic input. In the case of nuclear power plant components thermal transient loading is most fatigue relevant. Usual global fatigue monitoring approaches rely on measured data from plant instrumentation. As an extension, the application of a local fatigue monitoring strategy (to be described in detail within the scope of this paper) paves the way of delivering continuously (nowadays at a frequency of 1 Hz) realistic load data at the fatigue relevant locations. Methods of qualified processing of these data are discussed in detail. Particularly, the processing of arbitrary operational load sequences and the derivation of representative model transients is discussed. This approach related to realistic load-time histories is principally applicable for all fatigue relevant components and ensures a realistic fatigue evaluation. (orig.)

  5. [Research on fast classification based on LIBS technology and principle component analyses].

    Science.gov (United States)

    Yu, Qi; Ma, Xiao-Hong; Wang, Rui; Zhao, Hua-Feng

    2014-11-01

    Laser-induced breakdown spectroscopy (LIBS) and the principle component analysis (PCA) were combined to study aluminum alloy classification in the present article. Classification experiments were done on thirteen different kinds of standard samples of aluminum alloy which belong to 4 different types, and the results suggested that the LIBS-PCA method can be used to aluminum alloy fast classification. PCA was used to analyze the spectrum data from LIBS experiments, three principle components were figured out that contribute the most, the principle component scores of the spectrums were calculated, and the scores of the spectrums data in three-dimensional coordinates were plotted. It was found that the spectrum sample points show clear convergence phenomenon according to the type of aluminum alloy they belong to. This result ensured the three principle components and the preliminary aluminum alloy type zoning. In order to verify its accuracy, 20 different aluminum alloy samples were used to do the same experiments to verify the aluminum alloy type zoning. The experimental result showed that the spectrum sample points all located in their corresponding area of the aluminum alloy type, and this proved the correctness of the earlier aluminum alloy standard sample type zoning method. Based on this, the identification of unknown type of aluminum alloy can be done. All the experimental results showed that the accuracy of principle component analyses method based on laser-induced breakdown spectroscopy is more than 97.14%, and it can classify the different type effectively. Compared to commonly used chemical methods, laser-induced breakdown spectroscopy can do the detection of the sample in situ and fast with little sample preparation, therefore, using the method of the combination of LIBS and PCA in the areas such as quality testing and on-line industrial controlling can save a lot of time and cost, and improve the efficiency of detection greatly.

  6. Aquarius' Object-Oriented, Plug and Play Component-Based Flight Software

    Science.gov (United States)

    Murray, Alexander; Shahabuddin, Mohammad

    2013-01-01

    The Aquarius mission involves a combined radiometer and radar instrument in low-Earth orbit, providing monthly global maps of Sea Surface Salinity. Operating successfully in orbit since June, 2011, the spacecraft bus was furnished by the Argentine space agency, Comision Nacional de Actividades Espaciales (CONAE). The instrument, built jointly by NASA's Caltech/JPL and Goddard Space Flight Center, has been successfully producing expectation-exceeding data since it was powered on in August of 2011. In addition to the radiometer and scatterometer, the instrument contains an command & data-handling subsystem with a computer and flight software (FSW) that is responsible for managing the instrument, its operation, and its data. Aquarius' FSW is conceived and architected as a Component-based system, in which the running software consists of a set of Components, each playing a distinctive role in the subsystem, instantiated and connected together at runtime. Component architectures feature a well-defined set of interfaces between the Components, visible and analyzable at the architectural level (see [1]). As we will describe, this kind of an architecture offers significant advantages over more traditional FSW architectures, which often feature a monolithic runtime structure. Component-based software is enabled by Object-Oriented (OO) techniques and languages, the use of which again is not typical in space mission FSW. We will argue in this paper that the use of OO design methods and tools (especially the Unified Modeling Language), as well as the judicious usage of C++, are very well suited to FSW applications, and we will present Aquarius FSW, describing our methods, processes, and design, as a successful case in point.

  7. Novel Ontologies-based Optical Character Recognition-error Correction Cooperating with Graph Component Extraction

    Directory of Open Access Journals (Sweden)

    Sarunya Kanjanawattana

    2017-01-01

    Full Text Available literature. Extracting graph information clearly contributes to readers, who are interested in graph information interpretation, because we can obtain significant information presenting in the graph. A typical tool used to transform image-based characters to computer editable characters is optical character recognition (OCR. Unfortunately, OCR cannot guarantee perfect results, because it is sensitive to noise and input quality. This becomes a serious problem because misrecognition provides misunderstanding information to readers and causes misleading communication. In this study, we present a novel method for OCR-error correction based on bar graphs using semantics, such as ontologies and dependency parsing. Moreover, we used a graph component extraction proposed in our previous study to omit irrelevant parts from graph components. It was applied to clean and prepare input data for this OCR-error correction. The main objectives of this paper are to extract significant information from the graph using OCR and to correct OCR errors using semantics. As a result, our method provided remarkable performance with the highest accuracies and F-measures. Moreover, we examined that our input data contained less of noise because of an efficiency of our graph component extraction. Based on the evidence, we conclude that our solution to the OCR problem achieves the objectives.

  8. Age estimation in forensic anthropology: quantification of observer error in phase versus component-based methods.

    Science.gov (United States)

    Shirley, Natalie R; Ramirez Montes, Paula Andrea

    2015-01-01

    The purpose of this study was to assess observer error in phase versus component-based scoring systems used to develop age estimation methods in forensic anthropology. A method preferred by forensic anthropologists in the AAFS was selected for this evaluation (the Suchey-Brooks method for the pubic symphysis). The Suchey-Brooks descriptions were used to develop a corresponding component-based scoring system for comparison. Several commonly used reliability statistics (kappa, weighted kappa, and the intraclass correlation coefficient) were calculated to assess observer agreement between two observers and to evaluate the efficacy of each of these statistics for this study. The linear weighted kappa was determined to be the most suitable measure of observer agreement. The results show that a component-based system offers the possibility for more objective scoring than a phase system as long as the coding possibilities for each trait do not exceed three states of expression, each with as little overlap as possible. © 2014 American Academy of Forensic Sciences.

  9. Optimization Research of Generation Investment Based on Linear Programming Model

    Science.gov (United States)

    Wu, Juan; Ge, Xueqian

    Linear programming is an important branch of operational research and it is a mathematical method to assist the people to carry out scientific management. GAMS is an advanced simulation and optimization modeling language and it will combine a large number of complex mathematical programming, such as linear programming LP, nonlinear programming NLP, MIP and other mixed-integer programming with the system simulation. In this paper, based on the linear programming model, the optimized investment decision-making of generation is simulated and analyzed. At last, the optimal installed capacity of power plants and the final total cost are got, which provides the rational decision-making basis for optimized investments.

  10. Adapting Animal-Assisted Therapy Trials to Prison-Based Animal Programs.

    Science.gov (United States)

    Allison, Molly; Ramaswamy, Megha

    2016-09-01

    Prison-based animal programs have shown promise when it comes to increased sociability, responsibility, and levels of patience for inmates who participate in these programs. Yet there remains a dearth of scientific research that demonstrates the impact of prison-based animal programs on inmates' physical and mental health. Trials of animal-assisted therapy interventions, a form of human-animal interaction therapy most often used with populations affected by depression/anxiety, mental illness, and trauma, may provide models of how prison-based animal program research can have widespread implementation in jail and prison settings, whose populations have high rates of mental health problems. This paper reviews the components of prison-based animal programs most commonly practiced in prisons today, presents five animal-assisted therapy case studies, evaluates them based on their adaptability to prison-based animal programs, and discusses the institutional constraints that act as barriers for rigorous prison-based animal program research implementation. This paper can serve to inform the development of a research approach to animal-assisted therapy that nurses and other public health researchers can use in working with correctional populations. © 2016 Wiley Periodicals, Inc.

  11. A national survey of school-based, adolescent suicide prevention programs.

    Science.gov (United States)

    Garland, A; Shaffer, D; Whittle, B

    1989-11-01

    A national survey of suicide prevention programs was conducted to determine the number, distribution and content of school-based, curriculum programs for adolescents. One hundred fifteen programs were identified. The total number of students and schools targeted for prevention efforts more than doubled during the academic years 1984/1985 to 1986/1987. Content of the programs was similar, with nearly all including information on suicide warning signs and other facts, as well as on accessing community mental health resources. Most included a separate component for school staff and parents. Ninety-five percent subscribed to the view that suicide is most commonly a response to extreme stress or pressure and could happen to anyone. Possible negative implications of this "stress model" of suicide were discussed. While this survey plays an important first step in providing a description of these programs, more evaluative research is needed to determine what effect, if any, these programs have on suicidal behavior.

  12. A constructive Indian country response to the evidence-based program mandate.

    Science.gov (United States)

    Walker, R Dale; Bigelow, Douglas A

    2011-01-01

    Over the last 20 years governmental mandates for preferentially funding evidence-based "model" practices and programs has become doctrine in some legislative bodies, federal agencies, and state agencies. It was assumed that what works in small sample, controlled settings would work in all community settings, substantially improving safety, effectiveness, and value-for-money. The evidence-based "model" programs mandate has imposed immutable "core components," fidelity testing, alien programming and program developers, loss of familiar programs, and resource capacity requirements upon tribes, while infringing upon their tribal sovereignty and consultation rights. Tribal response in one state (Oregon) went through three phases: shock and rejection; proposing an alternative approach using criteria of cultural appropriateness, aspiring to evaluability; and adopting logic modeling. The state heard and accepted the argument that the tribal way of knowing is different and valid. Currently, a state-authorized tribal logic model and a review panel process are used to approve tribal best practices for state funding. This constructive response to the evidence-based program mandate elevates tribal practices in the funding and regulatory world, facilitates continuing quality improvement and evaluation, while ensuring that practices and programs remain based on local community context and culture. This article provides details of a model that could well serve tribes facing evidence-based model program mandates throughout the country.

  13. Component Degradation Susceptibilities As The Bases For Modeling Reactor Aging Risk

    International Nuclear Information System (INIS)

    Unwin, Stephen D.; Lowry, Peter P.; Toyooka, Michael Y.

    2010-01-01

    The extension of nuclear power plant operating licenses beyond 60 years in the United States will be necessary if we are to meet national energy needs while addressing the issues of carbon and climate. Characterizing the operating risks associated with aging reactors is problematic because the principal tool for risk-informed decision-making, Probabilistic Risk Assessment (PRA), is not ideally-suited to addressing aging systems. The components most likely to drive risk in an aging reactor - the passives - receive limited treatment in PRA, and furthermore, standard PRA methods are based on the assumption of stationary failure rates: a condition unlikely to be met in an aging system. A critical barrier to modeling passives aging on the wide scale required for a PRA is that there is seldom sufficient field data to populate parametric failure models, and nor is there the availability of practical physics models to predict out-year component reliability. The methodology described here circumvents some of these data and modeling needs by using materials degradation metrics, integrated with conventional PRA models, to produce risk importance measures for specific aging mechanisms and component types. We suggest that these measures have multiple applications, from the risk-screening of components to the prioritization of materials research.

  14. [Construction of multiple drug release system based on components of traditional Chinese medicine].

    Science.gov (United States)

    Liu, Dan; Jia, Xiaobin; Yu, Danhong; Zhang, Zhenhai; Sun, E

    2012-08-01

    With the development of the modernization drive of traditional Chinese medicine (TCM) preparations, new-type TCM dosage forms research have become a hot spot in the field. Because of complexity of TCM components as well as uncertainty of material base, there is still not a scientific system for modern TCM dosage forms so far. Modern TCM preparations inevitably take the nature of the multi-component and the general function characteristics of multi-link and multi-target into account. The author suggests building a multiple drug release system for TCM using diverse preparation techniques and drug release methods at levels on the basis the nature and function characteristics of TCM components. This essay expounds elaborates the ideas to build the multiple traditional Chinese medicine release system, theoretical basis, preparation techniques and assessment system, current problems and solutions, in order to build a multiple TCM release system with a view of enhancing the bioavailability of TCM components and provide a new form for TCM preparations.

  15. Facilitating in vivo tumor localization by principal component analysis based on dynamic fluorescence molecular imaging

    Science.gov (United States)

    Gao, Yang; Chen, Maomao; Wu, Junyu; Zhou, Yuan; Cai, Chuangjian; Wang, Daliang; Luo, Jianwen

    2017-09-01

    Fluorescence molecular imaging has been used to target tumors in mice with xenograft tumors. However, tumor imaging is largely distorted by the aggregation of fluorescent probes in the liver. A principal component analysis (PCA)-based strategy was applied on the in vivo dynamic fluorescence imaging results of three mice with xenograft tumors to facilitate tumor imaging, with the help of a tumor-specific fluorescent probe. Tumor-relevant features were extracted from the original images by PCA and represented by the principal component (PC) maps. The second principal component (PC2) map represented the tumor-related features, and the first principal component (PC1) map retained the original pharmacokinetic profiles, especially of the liver. The distribution patterns of the PC2 map of the tumor-bearing mice were in good agreement with the actual tumor location. The tumor-to-liver ratio and contrast-to-noise ratio were significantly higher on the PC2 map than on the original images, thus distinguishing the tumor from its nearby fluorescence noise of liver. The results suggest that the PC2 map could serve as a bioimaging marker to facilitate in vivo tumor localization, and dynamic fluorescence molecular imaging with PCA could be a valuable tool for future studies of in vivo tumor metabolism and progression.

  16. Blood component therapy in anesthesia and intensive care: Adoption of evidence based approaches

    Directory of Open Access Journals (Sweden)

    Sukhminder Jit Singh Bajwa

    2014-01-01

    Full Text Available Transfusion of blood and its components has undergone technological advancement, and its use is increasing both perioperatively as well as in the Intensive Care Unit. The separation of blood into its various components has made it very economical as blood donated from a single donor can be utilized for many recipients at the same time. However, the transfusion of blood and its components do carry the inherent risk of various transfusion reactions as well as transmission of infections. The indications for transfusion should be strictly adhered to for preventing nonjudicious use. The health care persons involved in transfusion should be well aware of implications of the mismatched transfusion and should be able to provide treatment if such mishaps do occur. A health care professional should carefully weigh the benefits of blood transfusion against the risks involved before subjecting the patients to the transfusion. This manuscript aims to comprehensively review the current evidence based approaches in blood and component transfusion which are being followed in anesthesiology and intensive care practice.

  17. Identifying and Analyzing Strong Components of an Industrial Network Based on Cycle Degree

    Directory of Open Access Journals (Sweden)

    Zhiying Zhang

    2016-01-01

    Full Text Available In the era of big data and cloud computing, data research focuses not only on describing the individual characteristics but also on depicting the relationships among individuals. Studying dependence and constraint relationships among industries has aroused significant interest in the academic field. From the network perspective, this paper tries to analyze industrial relational structures based on cycle degree. The cycle degree of a vertex, that is, the number of cycles through a vertex in an industrial network, can describe the roles of the vertices of strong components in industrial circulation. In most cases, different vertices in a strong component have different cycle degrees, and the one with a larger cycle degree plays more important roles. However, the concept of cycle degree does not involve the lengths of the cycles, which are also important for circulations. The more indirect the relationship between two industries is, the weaker it is. In order to analyze strong components thoroughly, this paper proposes the concept of circular centrality taking into consideration the influence by two factors: the lengths and the numbers of cycles through a vertex. Exemplification indicates that a profound analysis of strong components in an industrial network can reveal the features of an economy.

  18. Community-Based Rehabilitation in Bangladesh, Health Components Need to be Integrated with Primary Health Care

    Directory of Open Access Journals (Sweden)

    Md Shahidur Rahman

    2018-01-01

    Full Text Available Community-based rehabilitation (CBR is defined as a strategy within general community development for the rehabilitation, equalization of opportunities, poverty reduction and social inclusion of people with disabilities. The role of CBR is to work closely with the health sector to ensure that the needs of people with disabilities and their family members are addressed in the areas of health promotion, prevention, medical care, rehabilitation and assistive devices. CBR also needs to work with individuals and their families to facilitate their access to health services and to work with other sectors to ensure that all aspects of health are addressed. Health components of CBR as per WHO guidelines are grossly neglected in Bangladesh. Some government and non-government organizations are working independently, but health components are inadequately addressed. We observed that primary health care, if integrated with medical rehabilitation of disabled, will better address the need and help bring disabled into mainstream of development. Health care providers at grass root level need to be trained in CBR activities which can be arranged centrally with health ministry, social welfare ministry and rehabilitation specialists. In this review we have tried to reveal the health components of CBR in global and Bangladesh context and importance of integrating health components of CBR with primary health care.

  19. Risk-based priorities for inspection of nuclear pressure boundary components at selected LWRs

    International Nuclear Information System (INIS)

    Vo, T.V.; Simonen, F.A.; Gore, B.F.; Doctor, S.R.; Smith, B.W.

    1990-03-01

    Data from existing probabilistic risk assessments for eight representative nuclear power plants were used to identify and prioritize the most relevant systems to plant safety. The objective was to assess current in-service inspection requirements for pressure boundary systems and components, and to develop recommendations for improvements. This study demonstrates the feasibility of using risk-based methods to develop plant-specific inspection plans. Results for the eight representative plants also indicate generic trends that suggest improvements in current inspection plans now based on priorities set in accordance with code definitions of Class 1, 2, and 3 systems. 2 refs., 4 figs., 5 tabs

  20. Risk-based priorities for inspection of nuclear pressure boundary components at selected LWRs

    International Nuclear Information System (INIS)

    Vo, T.V.; Simonen, F.A.; Gore, B.F.; Doctor, S.R.; Smith, B.W.

    1990-01-01

    Data from existing probabilistic risk assessments for eight representative nuclear power plants were used to identify and prioritize the most relevant systems to plant safety. The objective of this paper is to assess current in-service inspection requirements for pressure boundary systems and components, and to develop recommendations for improvements. This study demonstrates the feasibility of using risk-based methods to develop plant-specific inspection plans. Results for the eight representative plants also indicate generic trends that suggest improvements in current inspection plans now based on priorities set in accordance with code definitions of Class 1, 2, and 3 systems

  1. An intensive primary-literature-based teaching program directly benefits undergraduate science majors and facilitates their transition to doctoral programs.

    Science.gov (United States)

    Kozeracki, Carol A; Carey, Michael F; Colicelli, John; Levis-Fitzgerald, Marc; Grossel, Martha

    2006-01-01

    UCLA's Howard Hughes Undergraduate Research Program (HHURP), a collaboration between the College of Letters and Science and the School of Medicine, trains a group of highly motivated undergraduates through mentored research enhanced by a rigorous seminar course. The course is centered on the presentation and critical analysis of scientific journal articles as well as the students' own research. This article describes the components and objectives of the HHURP and discusses the results of three program assessments: annual student evaluations, interviews with UCLA professors who served as research advisors for HHURP scholars, and a survey of program alumni. Students indicate that the program increased their ability to read and present primary scientific research and to present their own research and enhanced their research experience at UCLA. After graduating, they find their involvement in the HHURP helped them in securing admission to the graduate program of their choice and provided them with an advantage over their peers in the interactive seminars that are the foundation of graduate education. On the basis of the assessment of the program from 1998-1999 to 2004-2005, we conclude that an intensive literature-based training program increases student confidence and scientific literacy during their undergraduate years and facilitates their transition to postgraduate study.

  2. A METHOD FOR SOLVING LINEAR PROGRAMMING PROBLEMS WITH FUZZY PARAMETERS BASED ON MULTIOBJECTIVE LINEAR PROGRAMMING TECHNIQUE

    OpenAIRE

    M. ZANGIABADI; H. R. MALEKI

    2007-01-01

    In the real-world optimization problems, coefficients of the objective function are not known precisely and can be interpreted as fuzzy numbers. In this paper we define the concepts of optimality for linear programming problems with fuzzy parameters based on those for multiobjective linear programming problems. Then by using the concept of comparison of fuzzy numbers, we transform a linear programming problem with fuzzy parameters to a multiobjective linear programming problem. To this end, w...

  3. A component-based system for agricultural drought monitoring by remote sensing.

    Science.gov (United States)

    Dong, Heng; Li, Jun; Yuan, Yanbin; You, Lin; Chen, Chao

    2017-01-01

    In recent decades, various kinds of remote sensing-based drought indexes have been proposed and widely used in the field of drought monitoring. However, the drought-related software and platform development lag behind the theoretical research. The current drought monitoring systems focus mainly on information management and publishing, and cannot implement professional drought monitoring or parameter inversion modelling, especially the models based on multi-dimensional feature space. In view of the above problems, this paper aims at fixing this gap with a component-based system named RSDMS to facilitate the application of drought monitoring by remote sensing. The system is designed and developed based on Component Object Model (COM) to ensure the flexibility and extendibility of modules. RSDMS realizes general image-related functions such as data management, image display, spatial reference management, image processing and analysis, and further provides drought monitoring and evaluation functions based on internal and external models. Finally, China's Ningxia region is selected as the study area to validate the performance of RSDMS. The experimental results show that RSDMS provide an efficient and scalable support to agricultural drought monitoring.

  4. A component-based system for agricultural drought monitoring by remote sensing.

    Directory of Open Access Journals (Sweden)

    Heng Dong

    Full Text Available In recent decades, various kinds of remote sensing-based drought indexes have been proposed and widely used in the field of drought monitoring. However, the drought-related software and platform development lag behind the theoretical research. The current drought monitoring systems focus mainly on information management and publishing, and cannot implement professional drought monitoring or parameter inversion modelling, especially the models based on multi-dimensional feature space. In view of the above problems, this paper aims at fixing this gap with a component-based system named RSDMS to facilitate the application of drought monitoring by remote sensing. The system is designed and developed based on Component Object Model (COM to ensure the flexibility and extendibility of modules. RSDMS realizes general image-related functions such as data management, image display, spatial reference management, image processing and analysis, and further provides drought monitoring and evaluation functions based on internal and external models. Finally, China's Ningxia region is selected as the study area to validate the performance of RSDMS. The experimental results show that RSDMS provide an efficient and scalable support to agricultural drought monitoring.

  5. Programming languages and operating systems used in data base systems

    International Nuclear Information System (INIS)

    Radulescu, T.G.

    1977-06-01

    Some apsects of the use of the programming languages and operating systems in the data base systems are presented. There are four chapters in this paper. In the first chapter we present some generalities about the programming languages. In the second one we describe the use of the programming languages in the data base systems. A classification of the programming languages used in data base systems is presented in the third one. An overview of the operating systems is made in the last chapter. (author)

  6. Usage of Parameterized Fatigue Spectra and Physics-Based Systems Engineering Models for Wind Turbine Component Sizing: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Parsons, Taylor; Guo, Yi; Veers, Paul; Dykes, Katherine; Damiani, Rick

    2016-01-26

    Software models that use design-level input variables and physics-based engineering analysis for estimating the mass and geometrical properties of components in large-scale machinery can be very useful for analyzing design trade-offs in complex systems. This study uses DriveSE, an OpenMDAO-based drivetrain model that uses stress and deflection criteria to size drivetrain components within a geared, upwind wind turbine. Because a full lifetime fatigue load spectrum can only be defined using computationally-expensive simulations in programs such as FAST, a parameterized fatigue loads spectrum that depends on wind conditions, rotor diameter, and turbine design life has been implemented. The parameterized fatigue spectrum is only used in this paper to demonstrate the proposed fatigue analysis approach. This paper details a three-part investigation of the parameterized approach and a comparison of the DriveSE model with and without fatigue analysis on the main shaft system. It compares loads from three turbines of varying size and determines if and when fatigue governs drivetrain sizing compared to extreme load-driven design. It also investigates the model's sensitivity to shaft material parameters. The intent of this paper is to demonstrate how fatigue considerations in addition to extreme loads can be brought into a system engineering optimization.

  7. Physical Activity into Socialization: A Movement-Based Social Skills Program for Children with Autism Spectrum Disorder

    Science.gov (United States)

    Lee, Jihyun; Vargo, Kristina K.

    2017-01-01

    Children with autism spectrum disorder (ASD) often exhibit deficits in social-communicative behaviors. Given the increased prevalence of children with ASD, programs designed to teach social-communicative behaviors are necessary. This article introduces a movement-based program that embeds social-skill components to improve the motor skills and…

  8. Comparison of thorium-based fuels with different fissile components in existing BWRs

    International Nuclear Information System (INIS)

    Bjoerk, Klara Insulander; Fhager, Valentin; Demaziere, Christophe

    2009-01-01

    Three different types of thorium based BWR fuel have been developed, in each of which thorium was combined with a different fissile component, the three components being reactor grade plutonium, uranium enriched to 20% in uranium 235 and pure uranium 233. A BWR nuclear bundle design, based on the geometrical fuel assembly design GE14, was developed for each of these fissile components. The properties and performance of the corresponding fuel assemblies were investigated via full core calculations carried out for an existing BWR and compared with the ones of an ordinary Low Enriched Uranium (LEU) fuel, which was developed for reference. The fuel assemblies and cores were designed to meet existing fuel design criteria, and were then analyzed with regards to reactivity coefficients, delayed neutron fractions, control rod worths and shutdown margins. The results show that all three alternatives seem to be feasible, although some difficulties remain with complying with the thermal limits, and with the moderator temperature and coolant void coefficients of the U-233 containing fuel being positive under some circumstances. (author)

  9. A new methodology based on functional principal component analysis to study postural stability post-stroke.

    Science.gov (United States)

    Sánchez-Sánchez, M Luz; Belda-Lois, Juan-Manuel; Mena-Del Horno, Silvia; Viosca-Herrero, Enrique; Igual-Camacho, Celedonia; Gisbert-Morant, Beatriz

    2018-05-05

    A major goal in stroke rehabilitation is the establishment of more effective physical therapy techniques to recover postural stability. Functional Principal Component Analysis provides greater insight into recovery trends. However, when missing values exist, obtaining functional data presents some difficulties. The purpose of this study was to reveal an alternative technique for obtaining the Functional Principal Components without requiring the conversion to functional data beforehand and to investigate this methodology to determine the effect of specific physical therapy techniques in balance recovery trends in elderly subjects with hemiplegia post-stroke. A randomized controlled pilot trial was developed. Thirty inpatients post-stroke were included. Control and target groups were treated with the same conventional physical therapy protocol based on functional criteria, but specific techniques were added to the target group depending on the subjects' functional level. Postural stability during standing was quantified by posturography. The assessments were performed once a month from the moment the participants were able to stand up to six months post-stroke. The target group showed a significant improvement in postural control recovery trend six months after stroke that was not present in the control group. Some of the assessed parameters revealed significant differences between treatment groups (P Functional Principal Component Analysis to be performed when data is scarce. Moreover, it allowed the dynamics of recovery of two different treatment groups to be determined, showing that the techniques added in the target group increased postural stability compared to the base protocol. Copyright © 2018 Elsevier Ltd. All rights reserved.

  10. New component-based normalization method to correct PET system models

    International Nuclear Information System (INIS)

    Kinouchi, Shoko; Miyoshi, Yuji; Suga, Mikio; Yamaya, Taiga; Yoshida, Eiji; Nishikido, Fumihiko; Tashima, Hideaki

    2011-01-01

    Normalization correction is necessary to obtain high-quality reconstructed images in positron emission tomography (PET). There are two basic types of normalization methods: the direct method and component-based methods. The former method suffers from the problem that a huge count number in the blank scan data is required. Therefore, the latter methods have been proposed to obtain high statistical accuracy normalization coefficients with a small count number in the blank scan data. In iterative image reconstruction methods, on the other hand, the quality of the obtained reconstructed images depends on the system modeling accuracy. Therefore, the normalization weighing approach, in which normalization coefficients are directly applied to the system matrix instead of a sinogram, has been proposed. In this paper, we propose a new component-based normalization method to correct system model accuracy. In the proposed method, two components are defined and are calculated iteratively in such a way as to minimize errors of system modeling. To compare the proposed method and the direct method, we applied both methods to our small OpenPET prototype system. We achieved acceptable statistical accuracy of normalization coefficients while reducing the count number of the blank scan data to one-fortieth that required in the direct method. (author)

  11. A Co-modeling Method Based on Component Features for Mechatronic Devices in Aero-engines

    Science.gov (United States)

    Wang, Bin; Zhao, Haocen; Ye, Zhifeng

    2017-08-01

    Data-fused and user-friendly design of aero-engine accessories is required because of their structural complexity and stringent reliability. This paper gives an overview of a typical aero-engine control system and the development process of key mechatronic devices used. Several essential aspects of modeling and simulation in the process are investigated. Considering the limitations of a single theoretic model, feature-based co-modeling methodology is suggested to satisfy the design requirements and compensate for diversity of component sub-models for these devices. As an example, a stepper motor controlled Fuel Metering Unit (FMU) is modeled in view of the component physical features using two different software tools. An interface is suggested to integrate the single discipline models into the synthesized one. Performance simulation of this device using the co-model and parameter optimization for its key components are discussed. Comparison between delivery testing and the simulation shows that the co-model for the FMU has a high accuracy and the absolute superiority over a single model. Together with its compatible interface with the engine mathematical model, the feature-based co-modeling methodology is proven to be an effective technical measure in the development process of the device.

  12. Building Rural Communities through School-Based Agriculture Programs

    Science.gov (United States)

    Martin, Michael J.; Henry, Anna

    2012-01-01

    The purpose of this study was to develop a substantive theory for community development by school-based agriculture programs through grounded theory methodology. Data for the study included in-depth interviews and field observations from three school-based agriculture programs in three non-metropolitan counties across a Midwestern state. The…

  13. An evidence-based rehabilitation program for tracheoesophageal speakers

    NARCIS (Netherlands)

    Jongmans, P.; Rossum, M.; As-Brooks, C.; Hilgers, F.; Pols, L.; Hilgers, F.J.M.; Pols, L.C.W.; van Rossum, M.; van den Brekel, M.W.M.

    2008-01-01

    Objectives: to develop an evidence-based therapy program aimed at improving tracheoesophageal speech intelligibility. The therapy program is based on particular problems found for TE speakers in a previous study as performed by the authors. Patients/Materials and Methods: 9 male laryngectomized

  14. Vibration energy harvesting based on integrated piezoelectric components operating in different modes.

    Science.gov (United States)

    Hu, Junhui; Jong, Januar; Zhao, Chunsheng

    2010-01-01

    To increase the vibration energy-harvesting capability of the piezoelectric generator based on a cantilever beam, we have proposed a piezoelectric generator that not only uses the strain change of piezoelectric components bonded on a cantilever beam, but also employs the weights at the tip of the cantilever beam to hit piezoelectric components located on the 2 sides of weights. A prototype of the piezoelectric generator has been fabricated and its characteristics have been measured and analyzed. The experimental results show that the piezoelectric components operating in the hit mode can substantially enhance the energy harvesting of the piezoelectric generator on a cantilever beam. Two methods are used and compared in the management of rectified output voltages from different groups of piezoelectric components. In one of them, the DC voltages from rectifiers are connected in series, and then the total DC voltage is applied to a capacitor. In another connection, the DC voltage from each group is applied to different capacitors. It is found that 22.3% of the harvested energy is wasted due to the series connection. The total output electric energy of our piezoelectric generator at nonresonance could be up to 43 nJ for one vibration excitation applied by spring, with initial vibration amplitude (0-p) of 18 mm and frequency of 18.5 Hz, when the rectified voltages from different groups of piezoelectric components are connected to their individual capacitors. In addition, the motion and impact of the weights at the tip of the cantilever beam are theoretically analyzed, which well explains the experimental phenomena and suggests the measures to improve the generator.

  15. Soft Sensor of Vehicle State Estimation Based on the Kernel Principal Component and Improved Neural Network

    Directory of Open Access Journals (Sweden)

    Haorui Liu

    2016-01-01

    Full Text Available In the car control systems, it is hard to measure some key vehicle states directly and accurately when running on the road and the cost of the measurement is high as well. To address these problems, a vehicle state estimation method based on the kernel principal component analysis and the improved Elman neural network is proposed. Combining with nonlinear vehicle model of three degrees of freedom (3 DOF, longitudinal, lateral, and yaw motion, this paper applies the method to the soft sensor of the vehicle states. The simulation results of the double lane change tested by Matlab/SIMULINK cosimulation prove the KPCA-IENN algorithm (kernel principal component algorithm and improved Elman neural network to be quick and precise when tracking the vehicle states within the nonlinear area. This algorithm method can meet the software performance requirements of the vehicle states estimation in precision, tracking speed, noise suppression, and other aspects.

  16. Protection algorithm for a wind turbine generator based on positive- and negative-sequence fault components

    DEFF Research Database (Denmark)

    Zheng, Tai-Ying; Cha, Seung-Tae; Crossley, Peter A.

    2011-01-01

    A protection relay for a wind turbine generator (WTG) based on positive- and negative-sequence fault components is proposed in the paper. The relay uses the magnitude of the positive-sequence component in the fault current to detect a fault on a parallel WTG, connected to the same power collection...... feeder, or a fault on an adjacent feeder; but for these faults, the relay remains stable and inoperative. A fault on the power collection feeder or a fault on the collection bus, both of which require an instantaneous tripping response, are distinguished from an inter-tie fault or a grid fault, which...... in the fault current is used to decide on either instantaneous or delayed operation. The operating performance of the relay is then verified using various fault scenarios modelled using EMTP-RV. The scenarios involve changes in the position and type of fault, and the faulted phases. Results confirm...

  17. Brazing and machining of carbon based materials for plasma facing components

    International Nuclear Information System (INIS)

    Brossa, M.; Guerreschi, U.; Rossi, M.

    1994-01-01

    Carbon based materials in the recent years have often been considered and used as armour material in plasma facing components for several fusion devices, because of their low Z and good high temperature characteristics that are compatible with the operation of nuclear reactors. These materials are often connected (mechanically or by brazing) to metals, that allow the support and the cooling functions (heat sink materials). In the following the experience of Ansaldo Ricerche about the study and the manufacturing of plasma facing components and mockups is described with reference to the influence of the carbon materials in performing brazing junction with metals. It is interesting to observe how the different characteristics of the carbon materials influence the brazing process. ((orig.))

  18. Research on The Construction of Flexible Multi-body Dynamics Model based on Virtual Components

    Science.gov (United States)

    Dong, Z. H.; Ye, X.; Yang, F.

    2018-05-01

    Focus on the harsh operation condition of space manipulator, which cannot afford relative large collision momentum, this paper proposes a new concept and technology, called soft-contact technology. In order to solve the problem of collision dynamics of flexible multi-body system caused by this technology, this paper also proposes the concepts of virtual components and virtual hinges, and constructs flexible dynamic model based on virtual components, and also studies on its solutions. On this basis, this paper uses NX to carry out model and comparison simulation for space manipulator in 3 different modes. The results show that using the model of multi-rigid body + flexible body hinge + controllable damping can make effective control on amplitude for the force and torque caused by target satellite collision.

  19. Analysis of Active Components in Salvia Miltiorrhiza Injection Based on Vascular Endothelial Cell Protection

    Directory of Open Access Journals (Sweden)

    Shen Jie

    2014-09-01

    Full Text Available Correlation analysis based on chromatograms and pharmacological activities is essential for understanding the effective components in complex herbal medicines. In this report, HPLC and measurement of antioxidant properties were used to describe the active ingredients of Salvia miltiorrhiza injection (SMI. HPLC results showed that tanshinol, protocatechuic aldehyde, rosmarinic acid, salvianolic acid B, protocatechuic acid and their metabolites in rat serum may contribute to the efficacy of SMI. Assessment of antioxidant properties indicated that differences in the composition of serum powder of SMI caused differences in vascular endothelial cell protection. When bivariate correlation was carried out it was found that salvianolic acid B, tanshinol and protocatechuic aldehyde were active components of SMI because they were correlated to antioxidant properties.

  20. Fluvial facies reservoir productivity prediction method based on principal component analysis and artificial neural network

    Directory of Open Access Journals (Sweden)

    Pengyu Gao

    2016-03-01

    Full Text Available It is difficult to forecast the well productivity because of the complexity of vertical and horizontal developments in fluvial facies reservoir. This paper proposes a method based on Principal Component Analysis and Artificial Neural Network to predict well productivity of fluvial facies reservoir. The method summarizes the statistical reservoir factors and engineering factors that affect the well productivity, extracts information by applying the principal component analysis method and approximates arbitrary functions of the neural network to realize an accurate and efficient prediction on the fluvial facies reservoir well productivity. This method provides an effective way for forecasting the productivity of fluvial facies reservoir which is affected by multi-factors and complex mechanism. The study result shows that this method is a practical, effective, accurate and indirect productivity forecast method and is suitable for field application.

  1. Principal components analysis of an evaluation of the hemiplegic subject based on the Bobath approach.

    Science.gov (United States)

    Corriveau, H; Arsenault, A B; Dutil, E; Lepage, Y

    1992-01-01

    An evaluation based on the Bobath approach to treatment has previously been developed and partially validated. The purpose of the present study was to verify the content validity of this evaluation with the use of a statistical approach known as principal components analysis. Thirty-eight hemiplegic subjects participated in the study. Analysis of the scores on each of six parameters (sensorium, active movements, muscle tone, reflex activity, postural reactions, and pain) was evaluated on three occasions across a 2-month period. Each time this produced three factors that contained 70% of the variation in the data set. The first component mainly reflected variations in mobility, the second mainly variations in muscle tone, and the third mainly variations in sensorium and pain. The results of such exploratory analysis highlight the fact that some of the parameters are not only important but also interrelated. These results seem to partially support the conceptual framework substantiating the Bobath approach to treatment.

  2. Conceptual design of a fission-based integrated test facility for fusion reactor components

    International Nuclear Information System (INIS)

    Watts, K.D.; Deis, G.A.; Hsu, P.Y.S.; Longhurst, G.R.; Masson, L.S.; Miller, L.G.

    1982-01-01

    The testing of fusion materials and components in fission reactors will become increasingly important because of lack of fusion engineering test devices in the immediate future and the increasing long-term demand for fusion testing when a fusion reactor test station becomes available. This paper presents the conceptual design of a fission-based Integrated Test Facility (ITF) developed by EG and G Idaho. This facility can accommodate entire first wall/blanket (FW/B) test modules such as those proposed for INTOR and can also accommodate smaller cylindrical modules similar to those designed by Oak Ridge National laboratory (ORNL) and Westinghouse. In addition, the facility can be used to test bulk breeder blanket materials, materials for tritium permeation, and components for performance in a nuclear environment. The ITF provides a cyclic neutron/gamma flux as well as the numerous module and experiment support functions required for truly integrated tests

  3. Photonic Beamformer Model Based on Analog Fiber-Optic Links’ Components

    International Nuclear Information System (INIS)

    Volkov, V A; Gordeev, D A; Ivanov, S I; Lavrov, A P; Saenko, I I

    2016-01-01

    The model of photonic beamformer for wideband microwave phased array antenna is investigated. The main features of the photonic beamformer model based on true-time-delay technique, DWDM technology and fiber chromatic dispersion are briefly analyzed. The performance characteristics of the key components of photonic beamformer for phased array antenna in the receive mode are examined. The beamformer model composed of the components available on the market of fiber-optic analog communication links is designed and tentatively investigated. Experimental demonstration of the designed model beamforming features includes actual measurement of 5-element microwave linear array antenna far-field patterns in 6-16 GHz frequency range for antenna pattern steering up to 40°. The results of experimental testing show good accordance with the calculation estimates. (paper)

  4. Effect of components of a workplace lactation program on breastfeeding duration among employees of a public-sector employer.

    Science.gov (United States)

    Balkam, Jane A Johnston; Cadwell, Karin; Fein, Sara B

    2011-07-01

    The purpose of this study was to evaluate the impact of the individual services offered via a workplace lactation program of one large public-sector employer on the duration of any breastfeeding and exclusive breastfeeding. Exclusive breastfeeding was defined as exclusive feeding of human milk for the milk feeding. A cross-sectional mailed survey approach was used. The sample (n = 128) consisted of women who had used at least one component of the lactation program in the past 3 years and who were still employed at the same organization when data were collected. Descriptive statistics included frequency distributions and contingency table analysis. Chi-square analysis was used for comparison of groups, and both analysis of variance (ANOVA) and univariate analysis of variance from a general linear model were used for comparison of means. The survey respondents were primarily older, white, married, well-educated, high-income women. More of the women who received each lactation program service were exclusively breastfeeding at 6 months of infant age in all categories of services, with significant differences in the categories of telephone support and return to work consultation. After adjusting for race and work status, logistic regression analysis showed the number of services received was positively related to exclusive breastfeeding at 6 months and participation in a return to work consultation was positively related to any breastfeeding at 6 months. The study demonstrated that the workplace lactation program had a positive impact on duration of breastfeeding for the women who participated. Participation in the telephone support and return to work consultation services, and the total number of services used were related to longer duration of exclusive and/or any breastfeeding.

  5. Finite Countermodel Based Verification for Program Transformation (A Case Study

    Directory of Open Access Journals (Sweden)

    Alexei P. Lisitsa

    2015-12-01

    Full Text Available Both automatic program verification and program transformation are based on program analysis. In the past decade a number of approaches using various automatic general-purpose program transformation techniques (partial deduction, specialization, supercompilation for verification of unreachability properties of computing systems were introduced and demonstrated. On the other hand, the semantics based unfold-fold program transformation methods pose themselves diverse kinds of reachability tasks and try to solve them, aiming at improving the semantics tree of the program being transformed. That means some general-purpose verification methods may be used for strengthening program transformation techniques. This paper considers the question how finite countermodels for safety verification method might be used in Turchin's supercompilation method. We extract a number of supercompilation sub-algorithms trying to solve reachability problems and demonstrate use of an external countermodel finder for solving some of the problems.

  6. School-based smoking prevention programs with the promise of long-term effects

    Directory of Open Access Journals (Sweden)

    Flay Brian R

    2009-03-01

    Full Text Available Abstract I provide a systematic review of trials of school-based smoking prevention programs that had at least 15 sessions, preferably with some in high school, that reported significant short-term effects, and that included long-term follow-up. This is supplemented with a description of some other programs that produce short-term effects that portend large long-term effects. I conclude that school-based programs can have long-term effects of practical importance it they: include 15 or more sessions over multiple years, including some in high school; use the social influence model and interactive delivery methods; include components on norms, commitment not to use, intentions not to use, and training and practice in the use of refusal and other life skills; and use peer leaders in some role. School-based programs of this type can reduce smoking onset by 25–30%, and school plus community programs can reduce smoking onset by 35–40% by the end of high school. Some early childhood programs that do not have smoking prevention as their main aim, including home nursing, the Good Behavior Game, the Positive Action program and others, seem to change the developmental trajectories of children so that they are less likely to engage in multiple problem behaviors, including smoking, as adolescents. This review makes it clear that effective school-based smoking prevention programs exist and can be adopted, adapted and deployed with success – and should be.

  7. A systematic review of school-based suicide prevention programs.

    Science.gov (United States)

    Katz, Cara; Bolton, Shay-Lee; Katz, Laurence Y; Isaak, Corinne; Tilston-Jones, Toni; Sareen, Jitender

    2013-10-01

    Suicide is one of the leading causes of death among youth today. Schools are a cost-effective way to reach youth, yet there is no conclusive evidence regarding the most effective prevention strategy. We conducted a systematic review of the empirical literature on school-based suicide prevention programs. Studies were identified through MEDLINE and Scopus searches, using keywords such as "suicide, education, prevention and program evaluation." Additional studies were identified with a manual search of relevant reference lists. Individual studies were rated for level of evidence, and the programs were given a grade of recommendation. Five reviewers rated all studies independently and disagreements were resolved through discussion. Sixteen programs were identified. Few programs have been evaluated for their effectiveness in reducing suicide attempts. Most studies evaluated the programs' abilities to improve students' and school staffs' knowledge and attitudes toward suicide. Signs of Suicide and the Good Behavior Game were the only programs found to reduce suicide attempts. Several other programs were found to reduce suicidal ideation, improve general life skills, and change gatekeeper behaviors. There are few evidence-based, school-based suicide prevention programs, a combination of which may be effective. It would be useful to evaluate the effectiveness of general mental health promotion programs on the outcome of suicide. The grades assigned in this review are reflective of the available literature, demonstrating a lack of randomized controlled trials. Further evaluation of programs examining suicidal behavior outcomes in randomized controlled trials is warranted. © 2013 Wiley Periodicals, Inc.

  8. Constraint-based verification of imperative programs

    OpenAIRE

    Beyene, Tewodros Awgichew

    2011-01-01

    work presented in the context of the European Master’s program in Computational Logic, as the partial requirement for obtaining Master of Science degree in Computational Logic The continuous reduction in the cost of computing ever since the first days of computers has resulted in the ubiquity of computing systems today; there is no any sphere of life in the daily routine of human beings that is not directly or indirectly influenced by computer systems anymore. But this high reliance ...

  9. Component-based engineering of real-time JAVA : applications on a polychronous design platform

    OpenAIRE

    Talpin , Jean-Pierre; Le Dez , Bruno; Gamatié , Abdoulaye; Le Guernic , Paul; Berner , David

    2003-01-01

    Rising complexity and performances of embedded systems, shortening time-to-ma- rket demands for digital equipments, growing installed bases of intellectual properties, stress high-level design as a prominent research topic to compensate a widening productivity gap. In this aim, we put the principles of polychronous design (i.e. multi-clocked and synchronous) to work in the context of the real-time Java programming language by introducing a method for modeling, transforming, verifying and simu...

  10. Operating Experience of Digital, Software-based Components Used in I and C and Electrical Systems in German NPPs

    International Nuclear Information System (INIS)

    Blum, Stefanie; Lochthofen, Andre; Quester, Claudia; Arians, Robert

    2015-01-01

    In recent years, many components in instrumentation and control (I and C) and electrical systems of nuclear power plants (NPPs) were replaced by digital, software-based components. Due to the more complex structure, software-based I and C and electrical components show the potential for new failure mechanisms and an increasing number of failure possibilities, including the potential for common cause failures. An evaluation of the operating experience of digital, software-based components may help to determine new failure modes of these components. In this paper, we give an overview over the results of the evaluation of the operating experience of digital, software-based components used in I and C and electrical systems in NPPs in Germany. (authors)

  11. A Biometric Face Recognition System Using an Algorithm Based on the Principal Component Analysis Technique

    Directory of Open Access Journals (Sweden)

    Gheorghe Gîlcă

    2015-06-01

    Full Text Available This article deals with a recognition system using an algorithm based on the Principal Component Analysis (PCA technique. The recognition system consists only of a PC and an integrated video camera. The algorithm is developed in MATLAB language and calculates the eigenfaces considered as features of the face. The PCA technique is based on the matching between the facial test image and the training prototype vectors. The mathcing score between the facial test image and the training prototype vectors is calculated between their coefficient vectors. If the matching is high, we have the best recognition. The results of the algorithm based on the PCA technique are very good, even if the person looks from one side at the video camera.

  12. Study on fatigue life evaluation of structural component based on crack growth criterion

    International Nuclear Information System (INIS)

    Shibata, Katsuyuki

    1984-07-01

    As one of the practical application of fracture mechanics, fatigue life evaluation method based on crack growth criterion has been diffusing in various field of technology in order to determine the rational and reliable life of structural components. The fatigue life by this method is evaluated based on the fatigue crack growth analysis from defects, while many problems, such as the influence of residual stress on the crack growth behavior, the effect of overloading, and evaluation method for multiple surface cracks, are not sufficiently solved yet. In this paper, the above problems are treated, and based on some exprimental data some simple mehtods for fatigue life evaluation are proposed regarding the above problems. Verification of the proposed methods are shown in the paper by comparing with some experimental results, and the applicability of the proposed method is also examined by the fatigue test of pipes with cracks in the inner surface. (author)

  13. Simulation based design strategy for EMC compliance of components in hybrid vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Maass, Uwe; Ndip, Ivan; Hoene, Eckard; Guttowski, Stephan [Fraunhofer-Institut fuer Zuverlaessigkeit und Mikrointegration (IZM), Berlin (Germany); Tschoban, Christian; Lang, Klaus-Dieter [Technische Univ. Berlin (Germany)

    2012-11-01

    The design of components for the power train of hybrid vehicles needs to take into account EMC compliance standards related to hazardous electromagnetic fields. Using a simulation based design strategy allows for virtual EMC tests in parallel to the mechanical / electrical power design and thus reduces (re-)design time and costs. Taking as an example a high-voltage battery for a hybrid vehicle the emitted magnetic fields outside the battery are examined. The simulation stategy is based on 3D EM simulations using a full-wave and an eddy current solver. The simulation models are based on the actual CAD data from the mechanical construction resulting in and a high geometrical aspect ratio. The impact of simulation specific aspects such as boundary conditions and excitation is given. It was found that using field simulations it is possible to identify noise sources and coupling paths as well as aid the construction of the battery. (orig.)

  14. Interaction between clay-based shaft seal components and crystalline host rock

    International Nuclear Information System (INIS)

    Priyanto, D.; Dixon, D.; Man, A.

    2010-01-01

    Document available in extended abstract form only. The Government of Canada has accepted the Nuclear Waste Management Organization's (NWMO) recommendation of Adaptive Phased Management (APM) as the long-term management approach for Canada's used nuclear fuel. APM ultimately involves the isolation and containment of used nuclear fuel deep in a Deep Geological Repository (DGR). On completion of waste emplacement operation and during repository closure, shaft seals, comprising clay-based shaft seal components, will be installed at strategic locations, such as where significant fracture zones (FZs) are located. The primary function of a shaft seal is to limit and prevent short-circuiting of the groundwater flow regime via the shaft. Currently, at Atomic Energy of Canada Limited's Underground Research Laboratory (URL) a full-scale shaft seal is being constructed at the intersection of a low dipping thrust fault called FZ 2 as part of the overall URL decommissioning activities. Both crystalline rock and sedimentary rock are considered potentially suitable host rocks formations for a DGR. This paper presents the results of numerical simulation of a shaft seal installed in moderately to sparsely fractured crystalline rock (MFR). The shape and thickness of the shaft seal modelled for a DGR in this exercise are similar to the shaft seal at the URL, but in the modelling exercise it is given a larger diameter (i.e. 7.30 m) equal to the assumed diameter of a production shaft of a repository. The seal consists of a blended bentonite-sand (BS) component that is constrained between two massive concrete seals. Dense backfill (DBF) materials are installed above and below the concrete seals (CS). The concrete seals are keyed into the access shaft to better anchor the concrete units in place and in order to restrain the swelling of the bentonite-sand component of the seal as it hydrates. The reference geosphere in the proposed work is MFR similar to the rock conditions

  15. A meta-model based approach for rapid formability estimation of continuous fibre reinforced components

    Science.gov (United States)

    Zimmerling, Clemens; Dörr, Dominik; Henning, Frank; Kärger, Luise

    2018-05-01

    Due to their high mechanical performance, continuous fibre reinforced plastics (CoFRP) become increasingly important for load bearing structures. In many cases, manufacturing CoFRPs comprises a forming process of textiles. To predict and optimise the forming behaviour of a component, numerical simulations are applied. However, for maximum part quality, both the geometry and the process parameters must match in mutual regard, which in turn requires numerous numerically expensive optimisation iterations. In both textile and metal forming, a lot of research has focused on determining optimum process parameters, whilst regarding the geometry as invariable. In this work, a meta-model based approach on component level is proposed, that provides a rapid estimation of the formability for variable geometries based on pre-sampled, physics-based draping data. Initially, a geometry recognition algorithm scans the geometry and extracts a set of doubly-curved regions with relevant geometry parameters. If the relevant parameter space is not part of an underlying data base, additional samples via Finite-Element draping simulations are drawn according to a suitable design-table for computer experiments. Time saving parallel runs of the physical simulations accelerate the data acquisition. Ultimately, a Gaussian Regression meta-model is built from the data base. The method is demonstrated on a box-shaped generic structure. The predicted results are in good agreement with physics-based draping simulations. Since evaluations of the established meta-model are numerically inexpensive, any further design exploration (e.g. robustness analysis or design optimisation) can be performed in short time. It is expected that the proposed method also offers great potential for future applications along virtual process chains: For each process step along the chain, a meta-model can be set-up to predict the impact of design variations on manufacturability and part performance. Thus, the method is

  16. Robust and Effective Component-based Banknote Recognition by SURF Features.

    Science.gov (United States)

    Hasanuzzaman, Faiz M; Yang, Xiaodong; Tian, YingLi

    2011-01-01

    Camera-based computer vision technology is able to assist visually impaired people to automatically recognize banknotes. A good banknote recognition algorithm for blind or visually impaired people should have the following features: 1) 100% accuracy, and 2) robustness to various conditions in different environments and occlusions. Most existing algorithms of banknote recognition are limited to work for restricted conditions. In this paper we propose a component-based framework for banknote recognition by using Speeded Up Robust Features (SURF). The component-based framework is effective in collecting more class-specific information and robust in dealing with partial occlusion and viewpoint changes. Furthermore, the evaluation of SURF demonstrates its effectiveness in handling background noise, image rotation, scale, and illumination changes. To authenticate the robustness and generalizability of the proposed approach, we have collected a large dataset of banknotes from a variety of conditions including occlusion, cluttered background, rotation, and changes of illumination, scaling, and viewpoints. The proposed algorithm achieves 100% recognition rate on our challenging dataset.

  17. A Novel Busbar Protection Based on the Average Product of Fault Components

    Directory of Open Access Journals (Sweden)

    Guibin Zou

    2018-05-01

    Full Text Available This paper proposes an original busbar protection method, based on the characteristics of the fault components. The method firstly extracts the fault components of the current and voltage after the occurrence of a fault, secondly it uses a novel phase-mode transformation array to obtain the aerial mode components, and lastly, it obtains the sign of the average product of the aerial mode voltage and current. For a fault on the busbar, the average products that are detected on all of the lines that are linked to the faulted busbar are all positive within a specific duration of the post-fault. However, for a fault at any one of these lines, the average product that has been detected on the faulted line is negative, while those on the non-faulted lines are positive. On the basis of the characteristic difference that is mentioned above, the identification criterion of the fault direction is established. Through comparing the fault directions on all of the lines, the busbar protection can quickly discriminate between an internal fault and an external fault. By utilizing the PSCAD/EMTDC software (4.6.0.0, Manitoba HVDC Research Centre, Winnipeg, MB, Canada, a typical 500 kV busbar model, with one and a half circuit breakers configuration, was constructed. The simulation results show that the proposed busbar protection has a good adjustability, high reliability, and rapid operation speed.

  18. Airborne electromagnetic data levelling using principal component analysis based on flight line difference

    Science.gov (United States)

    Zhang, Qiong; Peng, Cong; Lu, Yiming; Wang, Hao; Zhu, Kaiguang

    2018-04-01

    A novel technique is developed to level airborne geophysical data using principal component analysis based on flight line difference. In the paper, flight line difference is introduced to enhance the features of levelling error for airborne electromagnetic (AEM) data and improve the correlation between pseudo tie lines. Thus we conduct levelling to the flight line difference data instead of to the original AEM data directly. Pseudo tie lines are selected distributively cross profile direction, avoiding the anomalous regions. Since the levelling errors of selective pseudo tie lines show high correlations, principal component analysis is applied to extract the local levelling errors by low-order principal components reconstruction. Furthermore, we can obtain the levelling errors of original AEM data through inverse difference after spatial interpolation. This levelling method does not need to fly tie lines and design the levelling fitting function. The effectiveness of this method is demonstrated by the levelling results of survey data, comparing with the results from tie-line levelling and flight-line correlation levelling.

  19. Multiple-input multiple-output visible light communication system based on disorder dispersion components

    Science.gov (United States)

    Yang, Tao; Zhang, Qi; Hao, Yue; Zhou, Xin-hui; Yi, Ming-dong; Wei, Wei; Huang, Wei; Li, Xing-ao

    2017-10-01

    A multiple-input multiple-output visible light communication (VLC) system based on disorder dispersion components is presented. Instead of monochromatic sources and large size photodetectors used in the traditional VLC systems, broadband sources with different spectra act as the transmitters and a compact imaging chip sensor accompanied by a disorder dispersion component and a calculating component serve as the receivers in the proposed system. This system has the merits of small size, more channels, simple structure, easy integration, and low cost. Simultaneously, the broadband sources are suitable to act as illumination sources for their white color. A regularized procedure is designed to solve a matrix equation for decoding the signals at the receivers. A proof-of-concept experiment using on-off keying modulation has been done to prove the feasibility of the design. The experimental results show that the signals decoded by the receivers fit well with those generated from the transmitters, but the bit error ratio is increased with the number of the signal channels. The experimental results can be further improved using a high-speed charge-coupled device, decreasing noises, and increasing the distance between the transmitters and the receivers.

  20. A configurable component-based software system for magnetic field measurements

    Energy Technology Data Exchange (ETDEWEB)

    Nogiec, J.M.; DiMarco, J.; Kotelnikov, S.; Trombly-Freytag, K.; Walbridge, D.; Tartaglia, M.; /Fermilab

    2005-09-01

    A new software system to test accelerator magnets has been developed at Fermilab. The magnetic measurement technique involved employs a single stretched wire to measure alignment parameters and magnetic field strength. The software for the system is built on top of a flexible component-based framework, which allows for easy reconfiguration and runtime modification. Various user interface, data acquisition, analysis, and data persistence components can be configured to form different measurement systems that are tailored to specific requirements (e.g., involving magnet type or test stand). The system can also be configured with various measurement sequences or tests, each of them controlled by a dedicated script. It is capable of working interactively as well as executing a preselected sequence of tests. Each test can be parameterized to fit the specific magnet type or test stand requirements. The system has been designed with portability in mind and is capable of working on various platforms, such as Linux, Solaris, and Windows. It can be configured to use a local data acquisition subsystem or a remote data acquisition computer, such as a VME processor running VxWorks. All hardware-oriented components have been developed with a simulation option that allows for running and testing measurements in the absence of data acquisition hardware.

  1. Modelling Creativity: Identifying Key Components through a Corpus-Based Approach.

    Science.gov (United States)

    Jordanous, Anna; Keller, Bill

    2016-01-01

    Creativity is a complex, multi-faceted concept encompassing a variety of related aspects, abilities, properties and behaviours. If we wish to study creativity scientifically, then a tractable and well-articulated model of creativity is required. Such a model would be of great value to researchers investigating the nature of creativity and in particular, those concerned with the evaluation of creative practice. This paper describes a unique approach to developing a suitable model of how creative behaviour emerges that is based on the words people use to describe the concept. Using techniques from the field of statistical natural language processing, we identify a collection of fourteen key components of creativity through an analysis of a corpus of academic papers on the topic. Words are identified which appear significantly often in connection with discussions of the concept. Using a measure of lexical similarity to help cluster these words, a number of distinct themes emerge, which collectively contribute to a comprehensive and multi-perspective model of creativity. The components provide an ontology of creativity: a set of building blocks which can be used to model creative practice in a variety of domains. The components have been employed in two case studies to evaluate the creativity of computational systems and have proven useful in articulating achievements of this work and directions for further research.

  2. Crude oil price analysis and forecasting based on variational mode decomposition and independent component analysis

    Science.gov (United States)

    E, Jianwei; Bao, Yanling; Ye, Jimin

    2017-10-01

    As one of the most vital energy resources in the world, crude oil plays a significant role in international economic market. The fluctuation of crude oil price has attracted academic and commercial attention. There exist many methods in forecasting the trend of crude oil price. However, traditional models failed in predicting accurately. Based on this, a hybrid method will be proposed in this paper, which combines variational mode decomposition (VMD), independent component analysis (ICA) and autoregressive integrated moving average (ARIMA), called VMD-ICA-ARIMA. The purpose of this study is to analyze the influence factors of crude oil price and predict the future crude oil price. Major steps can be concluded as follows: Firstly, applying the VMD model on the original signal (crude oil price), the modes function can be decomposed adaptively. Secondly, independent components are separated by the ICA, and how the independent components affect the crude oil price is analyzed. Finally, forecasting the price of crude oil price by the ARIMA model, the forecasting trend demonstrates that crude oil price declines periodically. Comparing with benchmark ARIMA and EEMD-ICA-ARIMA, VMD-ICA-ARIMA can forecast the crude oil price more accurately.

  3. [Study of Determination of Oil Mixture Components Content Based on Quasi-Monte Carlo Method].

    Science.gov (United States)

    Wang, Yu-tian; Xu, Jing; Liu, Xiao-fei; Chen, Meng-han; Wang, Shi-tao

    2015-05-01

    Gasoline, kerosene, diesel is processed by crude oil with different distillation range. The boiling range of gasoline is 35 ~205 °C. The boiling range of kerosene is 140~250 °C. And the boiling range of diesel is 180~370 °C. At the same time, the carbon chain length of differentmineral oil is different. The carbon chain-length of gasoline is within the scope of C7 to C11. The carbon chain length of kerosene is within the scope of C12 to C15. And the carbon chain length of diesel is within the scope of C15 to C18. The recognition and quantitative measurement of three kinds of mineral oil is based on different fluorescence spectrum formed in their different carbon number distribution characteristics. Mineral oil pollution occurs frequently, so monitoring mineral oil content in the ocean is very important. A new method of components content determination of spectra overlapping mineral oil mixture is proposed, with calculation of characteristic peak power integrationof three-dimensional fluorescence spectrum by using Quasi-Monte Carlo Method, combined with optimal algorithm solving optimum number of characteristic peak and range of integral region, solving nonlinear equations by using BFGS(a rank to two update method named after its inventor surname first letter, Boyden, Fletcher, Goldfarb and Shanno) method. Peak power accumulation of determined points in selected area is sensitive to small changes of fluorescence spectral line, so the measurement of small changes of component content is sensitive. At the same time, compared with the single point measurement, measurement sensitivity is improved by the decrease influence of random error due to the selection of points. Three-dimensional fluorescence spectra and fluorescence contour spectra of single mineral oil and the mixture are measured by taking kerosene, diesel and gasoline as research objects, with a single mineral oil regarded whole, not considered each mineral oil components. Six characteristic peaks are

  4. Estimation of cellular manufacturing cost components using simulation and activity-based costing

    OpenAIRE

    Paul Savory; Robert Williams

    2010-01-01

    It can be difficult estimating all of the cost components that are attributed to a machined part.  This problem is more pronounced when a factory uses group technology manufacturing cells as opposed to a functional or process layout of a job shop.  This paper describes how activity-based costing (ABC) concepts can be integrated into a discrete-event simulation model of a U-shaped manufacturing cell producing a part family with four members.  The simulation model generates detai...

  5. Estimation of cellular manufacturing cost components using simulation and activity-based costing

    OpenAIRE

    Savory, Paul

    2010-01-01

    It can be difficult estimating all of the cost components that are attributed to a machined part. This problem is more pronounced when a factory uses group technology manufacturing cells as opposed to a functional or process layout of a job shop. This paper describes how activity-based costing (ABC) concepts can be integrated into a discrete-event simulation model of a U-shaped manufacturing cell producing a part family with four members. The simulation model generates detailed Bills of Ac...

  6. A Novel Method for Surface Defect Detection of Photovoltaic Module Based on Independent Component Analysis

    Directory of Open Access Journals (Sweden)

    Xuewu Zhang

    2013-01-01

    Full Text Available This paper proposed a new method for surface defect detection of photovoltaic module based on independent component analysis (ICA reconstruction algorithm. Firstly, a faultless image is used as the training image. The demixing matrix and corresponding ICs are obtained by applying the ICA in the training image. Then we reorder the ICs according to the range values and reform the de-mixing matrix. Then the reformed de-mixing matrix is used to reconstruct the defect image. The resulting image can remove the background structures and enhance the local anomalies. Experimental results have shown that the proposed method can effectively detect the presence of defects in periodically patterned surfaces.

  7. Reliability-based optimization of maintenance scheduling of mechanical components under fatigue

    Science.gov (United States)

    Beaurepaire, P.; Valdebenito, M.A.; Schuëller, G.I.; Jensen, H.A.

    2012-01-01

    This study presents the optimization of the maintenance scheduling of mechanical components under fatigue loading. The cracks of damaged structures may be detected during non-destructive inspection and subsequently repaired. Fatigue crack initiation and growth show inherent variability, and as well the outcome of inspection activities. The problem is addressed under the framework of reliability based optimization. The initiation and propagation of fatigue cracks are efficiently modeled using cohesive zone elements. The applicability of the method is demonstrated by a numerical example, which involves a plate with two holes subject to alternating stress. PMID:23564979

  8. Probabilistic fatigue life prediction methodology for notched components based on simple smooth fatigue tests

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Z. R.; Li, Z. X. [Dept.of Engineering Mechanics, Jiangsu Key Laboratory of Engineering Mechanics, Southeast University, Nanjing (China); Hu, X. T.; Xin, P. P.; Song, Y. D. [State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing (China)

    2017-01-15

    The methodology of probabilistic fatigue life prediction for notched components based on smooth specimens is presented. Weakestlink theory incorporating Walker strain model has been utilized in this approach. The effects of stress ratio and stress gradient have been considered. Weibull distribution and median rank estimator are used to describe fatigue statistics. Fatigue tests under different stress ratios were conducted on smooth and notched specimens of titanium alloy TC-1-1. The proposed procedures were checked against the test data of TC-1-1 notched specimens. Prediction results of 50 % survival rate are all within a factor of two scatter band of the test results.

  9. In-plant reliability data base for nuclear power plant components: data collection and methodology report

    International Nuclear Information System (INIS)

    Drago, J.P.; Borkowski, R.J.; Pike, D.H.; Goldberg, F.F.

    1982-07-01

    The development of a component reliability data for use in nuclear power plant probabilistic risk assessments and reliabiilty studies is presented in this report. The sources of the data are the in-plant maintenance work request records from a sample of nuclear power plants. This data base is called the In-Plant Reliability Data (IPRD) system. Features of the IPRD system are compared with other data sources such as the Licensee Event Report system, the Nuclear Plant Reliability Data system, and IEEE Standard 500. Generic descriptions of nuclear power plant systems formulated for IPRD are given

  10. On risk-based operation and maintenance of offshore wind turbine components

    DEFF Research Database (Denmark)

    Nielsen, Jannie Jessen; Sørensen, John Dalsgaard

    2011-01-01

    Operation and maintenance are significant contributors to the cost of energy for offshore wind turbines. Optimal planning could rationally be based on Bayesian pre-posterior decision theory, and all costs through the lifetime of the structures should be included. This paper contains a study...... of a generic case where the costs are evaluated for a single wind turbine with a single component. Costs due to inspections, repairs, and lost production are included in the model. The costs are compared for two distinct maintenance strategies, namely with and without inclusion of periodic imperfect...

  11. An open, component-based information infrastructure for integrated health information networks.

    Science.gov (United States)

    Tsiknakis, Manolis; Katehakis, Dimitrios G; Orphanoudakis, Stelios C

    2002-12-18

    A fundamental requirement for achieving continuity of care is the seamless sharing of multimedia clinical information. Different technological approaches can be adopted for enabling the communication and sharing of health record segments. In the context of the emerging global information society, the creation of and access to the integrated electronic health record (I-EHR) of a citizen has been assigned high priority in many countries. This requirement is complementary to an overall requirement for the creation of a health information infrastructure (HII) to support the provision of a variety of health telematics and e-health services. In developing a regional or national HII, the components or building blocks that make up the overall information system ought to be defined and an appropriate component architecture specified. This paper discusses current international priorities and trends in developing the HII. It presents technological challenges and alternative approaches towards the creation of an I-EHR, being the aggregation of health data created during all interactions of an individual with the healthcare system. It also presents results from an ongoing Research and Development (R&D) effort towards the implementation of the HII in HYGEIAnet, the regional health information network of Crete, Greece, using a component-based software engineering approach. Critical design decisions and related trade-offs, involved in the process of component specification and development, are also discussed and the current state of development of an I-EHR service is presented. Finally, Human Computer Interaction (HCI) and security issues, which are important for the deployment and use of any I-EHR service, are considered.

  12. Infrared and visible image fusion based on robust principal component analysis and compressed sensing

    Science.gov (United States)

    Li, Jun; Song, Minghui; Peng, Yuanxi

    2018-03-01

    Current infrared and visible image fusion methods do not achieve adequate information extraction, i.e., they cannot extract the target information from infrared images while retaining the background information from visible images. Moreover, most of them have high complexity and are time-consuming. This paper proposes an efficient image fusion framework for infrared and visible images on the basis of robust principal component analysis (RPCA) and compressed sensing (CS). The novel framework consists of three phases. First, RPCA decomposition is applied to the infrared and visible images to obtain their sparse and low-rank components, which represent the salient features and background information of the images, respectively. Second, the sparse and low-rank coefficients are fused by different strategies. On the one hand, the measurements of the sparse coefficients are obtained by the random Gaussian matrix, and they are then fused by the standard deviation (SD) based fusion rule. Next, the fused sparse component is obtained by reconstructing the result of the fused measurement using the fast continuous linearized augmented Lagrangian algorithm (FCLALM). On the other hand, the low-rank coefficients are fused using the max-absolute rule. Subsequently, the fused image is superposed by the fused sparse and low-rank components. For comparison, several popular fusion algorithms are tested experimentally. By comparing the fused results subjectively and objectively, we find that the proposed framework can extract the infrared targets while retaining the background information in the visible images. Thus, it exhibits state-of-the-art performance in terms of both fusion effects and timeliness.

  13. A method for the preparation of a fuel, by the addition of one or more components to a base fuel

    NARCIS (Netherlands)

    2013-01-01

    The present invention relates to a method for the preparation of a fuel, by the addition of one or more components to a base fuel, wherein the method comprises the following steps: i) providing a base fuel; ii) withdrawing aromatic components from a styrene / propylene ox ide production plant; iii)

  14. Three-dimensional NDE of VHTR core components via simulation-based testing. Final report

    International Nuclear Information System (INIS)

    Guzina, Bojan; Kunerth, Dennis

    2014-01-01

    A next generation, simulation-driven-and-enabled testing platform is developed for the 3D detection and characterization of defects and damage in nuclear graphite and composite structures in Very High Temperature Reactors (VHTRs). The proposed work addresses the critical need for the development of high-fidelity Non-Destructive Examination (NDE) technologies for as-manufactured and replaceable in-service VHTR components. Centered around the novel use of elastic (sonic and ultrasonic) waves, this project deploys a robust, non-iterative inverse solution for the 3D defect reconstruction together with a non-contact, laser-based approach to the measurement of experimental waveforms in VHTR core components. In particular, this research (1) deploys three-dimensional Scanning Laser Doppler Vibrometry (3D SLDV) as a means to accurately and remotely measure 3D displacement waveforms over the accessible surface of a VHTR core component excited by mechanical vibratory source; (2) implements a powerful new inverse technique, based on the concept of Topological Sensitivity (TS), for non-iterative elastic waveform tomography of internal defects - that permits robust 3D detection, reconstruction and characterization of discrete damage (e.g. holes and fractures) in nuclear graphite from limited-aperture NDE measurements; (3) implements state-of-the art computational (finite element) model that caters for accurately simulating elastic wave propagation in 3D blocks of nuclear graphite; (4) integrates the SLDV testing methodology with the TS imaging algorithm into a non-contact, high-fidelity NDE platform for the 3D reconstruction and characterization of defects and damage in VHTR core components; and (5) applies the proposed methodology to VHTR core component samples (both two- and three-dimensional) with a priori induced, discrete damage in the form of holes and fractures. Overall, the newly established SLDV-TS testing platform represents a next-generation NDE tool that surpasses

  15. Three-dimensional NDE of VHTR core components via simulation-based testing. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Guzina, Bojan [Univ. of Minnesota, Minneapolis, MN (United States); Kunerth, Dennis [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-09-30

    A next generation, simulation-driven-and-enabled testing platform is developed for the 3D detection and characterization of defects and damage in nuclear graphite and composite structures in Very High Temperature Reactors (VHTRs). The proposed work addresses the critical need for the development of high-fidelity Non-Destructive Examination (NDE) technologies for as-manufactured and replaceable in-service VHTR components. Centered around the novel use of elastic (sonic and ultrasonic) waves, this project deploys a robust, non-iterative inverse solution for the 3D defect reconstruction together with a non-contact, laser-based approach to the measurement of experimental waveforms in VHTR core components. In particular, this research (1) deploys three-dimensional Scanning Laser Doppler Vibrometry (3D SLDV) as a means to accurately and remotely measure 3D displacement waveforms over the accessible surface of a VHTR core component excited by mechanical vibratory source; (2) implements a powerful new inverse technique, based on the concept of Topological Sensitivity (TS), for non-iterative elastic waveform tomography of internal defects - that permits robust 3D detection, reconstruction and characterization of discrete damage (e.g. holes and fractures) in nuclear graphite from limited-aperture NDE measurements; (3) implements state-of-the art computational (finite element) model that caters for accurately simulating elastic wave propagation in 3D blocks of nuclear graphite; (4) integrates the SLDV testing methodology with the TS imaging algorithm into a non-contact, high-fidelity NDE platform for the 3D reconstruction and characterization of defects and damage in VHTR core components; and (5) applies the proposed methodology to VHTR core component samples (both two- and three-dimensional) with a priori induced, discrete damage in the form of holes and fractures. Overall, the newly established SLDV-TS testing platform represents a next-generation NDE tool that surpasses

  16. Site-Specific Incorporation of Functional Components into RNA by an Unnatural Base Pair Transcription System

    Directory of Open Access Journals (Sweden)

    Rie Kawai

    2012-03-01

    Full Text Available Toward the expansion of the genetic alphabet, an unnatural base pair between 7-(2-thienylimidazo[4,5-b]pyridine (Ds and pyrrole-2-carbaldehyde (Pa functions as a third base pair in replication and transcription, and provides a useful tool for the site-specific, enzymatic incorporation of functional components into nucleic acids. We have synthesized several modified-Pa substrates, such as alkylamino-, biotin-, TAMRA-, FAM-, and digoxigenin-linked PaTPs, and examined their transcription by T7 RNA polymerase using Ds-containing DNA templates with various sequences. The Pa substrates modified with relatively small functional groups, such as alkylamino and biotin, were efficiently incorporated into RNA transcripts at the internal positions, except for those less than 10 bases from the 3′-terminus. We found that the efficient incorporation into a position close to the 3′-terminus of a transcript depended on the natural base contexts neighboring the unnatural base, and that pyrimidine-Ds-pyrimidine sequences in templates were generally favorable, relative to purine-Ds-purine sequences. The unnatural base pair transcription system provides a method for the site-specific functionalization of large RNA molecules.

  17. Platform for Lipid Based Nanocarriers' Formulation Components and their Potential Effects: A Literature Review.

    Science.gov (United States)

    Farid, Ragwa Mohamed; Youssef, Nancy Abdel Hamid Abou; Kassem, Abeer Ahmed

    2017-11-27

    Lipid based nanocarriers have gained recently enormous interest for pharmaceutical application. They have the potential to provide controlled drug release and to target the drug to a specific area. In addition, lipid based nanocarriers can improve the bioavailability of drugs suffering from high hepatic first-pass metabolism, by enhancing their transport via the lymphatic system. The main components of lipid based nanocarriers are lipids and surfactants. Both have great influence on the prepared lipid based systems characteristics. The criteria for their selection are much related to physicochemical properties of the drug and the required administration route. This work gives an overview on the effect of both the type and amount of lipids and surfactants used in the manufacture of lipid based nanocarriers on their behavior and characteristics. Recent studies revealed that the properties of the final product including; particle size, homogeneity, drug loading capacity, zeta potential, drug release profile, stability, permeability, pharmacokinetic properties, crystallinity and cytotoxicity, may be significantly influenced not only by the type but also the amount of the lipids and/or surfactants included in the formulation of the lipid based nanocarriers. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  18. Recognition of grasp types through principal components of DWT based EMG features.

    Science.gov (United States)

    Kakoty, Nayan M; Hazarika, Shyamanta M

    2011-01-01

    With the advancement in machine learning and signal processing techniques, electromyogram (EMG) signals have increasingly gained importance in man-machine interaction. Multifingered hand prostheses using surface EMG for control has appeared in the market. However, EMG based control is still rudimentary, being limited to a few hand postures based on higher number of EMG channels. Moreover, control is non-intuitive, in the sense that the user is required to learn to associate muscle remnants actions to unrelated posture of the prosthesis. Herein lies the promise of a low channel EMG based grasp classification architecture for development of an embedded intelligent prosthetic controller. This paper reports classification of six grasp types used during 70% of daily living activities based on two channel forearm EMG. A feature vector through principal component analysis of discrete wavelet transform coefficients based features of the EMG signal is derived. Classification is through radial basis function kernel based support vector machine following preprocessing and maximum voluntary contraction normalization of EMG signals. 10-fold cross validation is done. We have achieved an average recognition rate of 97.5%. © 2011 IEEE

  19. Assessment of military population-based psychological resilience programs.

    Science.gov (United States)

    Morgan, Brenda J; Bibb, Sandra C Garmon

    2011-09-01

    Active duty service members' (ADSMs) seemingly poor adaptability to traumatic stressors is a risk to force health. Enhancing the psychological resilience of ADSMs has become a key focus of Department of Defense (DoD) leaders and the numbers of military programs for enhancing psychological resilience have increased. The purpose of this article is to describe the results of an assessment conducted to determine comprehensiveness of current psychological resilience building programs that target ADSMs. A modified six-step, population-based needs assessment was used to evaluate resilience programs designed to meet the psychological needs of the ADSM population. The assessment results revealed a gap in published literature regarding program outcomes. DoD leaders may benefit from targeted predictive research that assesses program effectiveness outcomes. The necessity of including preventive, evidence-based interventions in new programs, such as positive emotion interventions shown to enhance psychological resilience in civilian samples, is also recommended.

  20. Porous silicon based micro-opto-electro-mechanical-systems (MOEMS) components for free space optical interconnects

    Science.gov (United States)

    Song, Da

    2008-02-01

    One of the major challenges confronting the current integrated circuits (IC) industry is the metal "interconnect bottleneck". To overcome this obstacle, free space optical interconnects (FSOIs) can be used to address the demand for high speed data transmission, multi-functionality and multi-dimensional integration for the next generation IC. One of the crucial elements in FSOIs system is to develop a high performance and flexible optical network to transform the incoming optical signal into a distributed set of optical signals whose direction, alignment and power can be independently controlled. Among all the optical materials for the realization of FSOI components, porous silicon (PSi) is one of the most promising candidates because of its unique optical properties, flexible fabrication methods and integration with conventional IC material sets. PSi-based Distributed Bragg Reflector (DBR) and Fabry-Perot (F-P) structures with unique optical properties are realized by electrochemical etching of silicon. By incorporating PSi optical structures with Micro-Opto-Electro-Mechanical-Systems (MOEMS), several components required for FSOI have been developed. The first type of component is the out-of-plane freestanding optical switch. Implementing a PSi DBR structure as an optically active region, the device can realize channel selection by changing the tilting angle of the micromirror supported by the thermal bimorph actuator. All the fabricated optical switches have reached kHz working frequency and life time of millions of cycles. The second type of component is the in-plane tunable optical filter. By introducing PSi F-P structure into the in-plane PSi film, a thermally tunable optical filter with a sensitivity of 7.9nm/V has been realized for add/drop optical signal selection. Also, for the first time, a new type of PSi based reconfigurable diffractive optical element (DOE) has been developed. By using patterned photoresist as a protective mask for electrochemical