WorldWideScience

Sample records for component software tascs

  1. Center for Technology for Advanced Scientific Component Software (TASCS)

    Energy Technology Data Exchange (ETDEWEB)

    Damevski, Kostadin [Virginia State Univ., Petersburg, VA (United States)

    2009-03-30

    A resounding success of the Scientific Discover through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedened computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS) tackles these issues by exploiting component-based software development to facilitate collaborative hig-performance scientific computing.

  2. Center for Center for Technology for Advanced Scientific Component Software (TASCS)

    Energy Technology Data Exchange (ETDEWEB)

    Kostadin, Damevski [Virginia State Univ., Petersburg, VA (United States)

    2015-01-25

    A resounding success of the Scientific Discovery through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedented computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS)1 tackles these these issues by exploiting component-based software development to facilitate collaborative high-performance scientific computing.

  3. Center for Technology for Advanced Scientific Component Software (TASCS) Consolidated Progress Report July 2006 - March 2009

    Energy Technology Data Exchange (ETDEWEB)

    Bernholdt, D E; McInnes, L C; Govindaraju, M; Bramley, R; Epperly, T; Kohl, J A; Nieplocha, J; Armstrong, R; Shasharina, S; Sussman, A L; Sottile, M; Damevski, K

    2009-04-14

    A resounding success of the Scientific Discovery through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedented computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS) tackles these issues by exploiting component-based software development to facilitate collaborative high-performance scientific computing.

  4. Final Report for 'Center for Technology for Advanced Scientific Component Software'

    International Nuclear Information System (INIS)

    Shasharina, Svetlana

    2010-01-01

    The goal of the Center for Technology for Advanced Scientific Component Software is to fundamentally changing the way scientific software is developed and used by bringing component-based software development technologies to high-performance scientific and engineering computing. The role of Tech-X work in TASCS project is to provide an outreach to accelerator physics and fusion applications by introducing TASCS tools into applications, testing tools in the applications and modifying the tools to be more usable.

  5. Software component quality evaluation

    Science.gov (United States)

    Clough, A. J.

    1991-01-01

    The paper describes a software inspection process that can be used to evaluate the quality of software components. Quality criteria, process application, independent testing of the process and proposed associated tool support are covered. Early results indicate that this technique is well suited for assessing software component quality in a standardized fashion. With automated machine assistance to facilitate both the evaluation and selection of software components, such a technique should promote effective reuse of software components.

  6. Performance Engineering Technology for Scientific Component Software

    Energy Technology Data Exchange (ETDEWEB)

    Malony, Allen D.

    2007-05-08

    Large-scale, complex scientific applications are beginning to benefit from the use of component software design methodology and technology for software development. Integral to the success of component-based applications is the ability to achieve high-performing code solutions through the use of performance engineering tools for both intra-component and inter-component analysis and optimization. Our work on this project aimed to develop performance engineering technology for scientific component software in association with the DOE CCTTSS SciDAC project (active during the contract period) and the broader Common Component Architecture (CCA) community. Our specific implementation objectives were to extend the TAU performance system and Program Database Toolkit (PDT) to support performance instrumentation, measurement, and analysis of CCA components and frameworks, and to develop performance measurement and monitoring infrastructure that could be integrated in CCA applications. These objectives have been met in the completion of all project milestones and in the transfer of the technology into the continuing CCA activities as part of the DOE TASCS SciDAC2 effort. In addition to these achievements, over the past three years, we have been an active member of the CCA Forum, attending all meetings and serving in several working groups, such as the CCA Toolkit working group, the CQoS working group, and the Tutorial working group. We have contributed significantly to CCA tutorials since SC'04, hosted two CCA meetings, participated in the annual ACTS workshops, and were co-authors on the recent CCA journal paper [24]. There are four main areas where our project has delivered results: component performance instrumentation and measurement, component performance modeling and optimization, performance database and data mining, and online performance monitoring. This final report outlines the achievements in these areas for the entire project period. The submitted progress

  7. SBA Network Components & Software Inventory

    Data.gov (United States)

    Small Business Administration — SBA’s Network Components & Software Inventory contains a complete inventory of all devices connected to SBA’s network including workstations, servers, routers,...

  8. Unblockable Compositions of Software Components

    DEFF Research Database (Denmark)

    Dong, Ruzhen; Faber, Johannes; Liu, Zhiming

    2012-01-01

    We present a new automata-based interface model describing the interaction behavior of software components. Contrary to earlier component- or interface-based approaches, the interface model we propose specifies all the non-blockable interaction behaviors of a component with any environment...... composition of interface models preserves unblockable sequences of provided services....

  9. Behavior Protocols for Software Components

    Czech Academy of Sciences Publication Activity Database

    Plášil, František; Višňovský, Stanislav

    2002-01-01

    Roč. 28, č. 11 (2002), s. 1056-1076 ISSN 0098-5589 R&D Projects: GA AV ČR IAA2030902; GA ČR GA201/99/0244 Grant - others:Eureka(XE) Pepita project no.2033 Institutional research plan: AV0Z1030915 Keywords : behavior protocols * component-based programming * software architecture Subject RIV: JC - Computer Hardware ; Software Impact factor: 1.170, year: 2002

  10. Adaptation of Black-Box Software Components

    Directory of Open Access Journals (Sweden)

    Rolf Andreas Rasenack

    2008-01-01

    Full Text Available The globalization of the software market leads to crucial problems for software companies. More competition between software companies arises and leads to the force on companies to develop ever newer software products in ever shortened time interval. Therefore the time to market for software systems is shortened and obviously the product life cycle is shortened too. Thus software companies shortened the time interval for research and development. Due to the fact of competition between software companies software products have to develop low-priced and this leads to a smaller return on investment. A big challenge for software companies is the use of an effective research and development process to have these problems under control. A way to control these problems can be the reuse of existing software components and adapt those software components to new functionality or accommodate mismatched interfaces. Complete redevelopment of software products is more expensive and time consuming than to develop software components. The approach introduced here presents novel technique together with a supportive environment that enables developers to cope with the adaptability of black-box software components. A supportive environment will be designed that checks the compatibility of black-box software components with the assistance of their specifications. Generated adapter software components can take over the part of adaptation and advance the functionality. Besides, a pool of software components can be used to compose an application to satisfy customer needs. Certainly this pool of software components consists of black-box software components and adapter software components which can be connected on demand.

  11. Analyser Framework to Verify Software Components

    Directory of Open Access Journals (Sweden)

    Rolf Andreas Rasenack

    2009-01-01

    Full Text Available Today, it is important for software companies to build software systems in a short time-interval, to reduce costs and to have a good market position. Therefore well organized and systematic development approaches are required. Reusing software components, which are well tested, can be a good solution to develop software applications in effective manner. The reuse of software components is less expensive and less time consuming than a development from scratch. But it is dangerous to think that software components can be match together without any problems. Software components itself are well tested, of course, but even if they composed together problems occur. Most problems are based on interaction respectively communication. Avoiding such errors a framework has to be developed for analysing software components. That framework determines the compatibility of corresponding software components. The promising approach discussed here, presents a novel technique for analysing software components by applying an Abstract Syntax Language Tree (ASLT. A supportive environment will be designed that checks the compatibility of black-box software components. This article is concerned to the question how can be coupled software components verified by using an analyzer framework and determines the usage of the ASLT. Black-box Software Components and Abstract Syntax Language Tree are the basis for developing the proposed framework and are discussed here to provide the background knowledge. The practical implementation of this framework is discussed and shows the result by using a test environment.

  12. Model-integrating software components engineering flexible software systems

    CERN Document Server

    Derakhshanmanesh, Mahdi

    2015-01-01

    In his study, Mahdi Derakhshanmanesh builds on the state of the art in modeling by proposing to integrate models into running software on the component-level without translating them to code. Such so-called model-integrating software exploits all advantages of models: models implicitly support a good separation of concerns, they are self-documenting and thus improve understandability and maintainability and in contrast to model-driven approaches there is no synchronization problem anymore between the models and the code generated from them. Using model-integrating components, software will be

  13. Verification of Software Components: Addressing Unbounded Paralelism

    Czech Academy of Sciences Publication Activity Database

    Adámek, Jiří

    2007-01-01

    Roč. 8, č. 2 (2007), s. 300-309 ISSN 1525-9293 R&D Projects: GA AV ČR 1ET400300504 Institutional research plan: CEZ:AV0Z10300504 Keywords : software components * formal verification * unbounded parallelism Subject RIV: JC - Computer Hardware ; Software

  14. Software Component Certification: 10 Useful Distinctions

    National Research Council Canada - National Science Library

    Wallnau, Kurt C

    2004-01-01

    .... One persistent and largely unaddressed challenge is how the consumers of software components-that is, the developers of mission-critical systems-can obtain a meaningful level of trust in the runtime...

  15. A systematic approach for component-based software development

    NARCIS (Netherlands)

    Guareis de farias, Cléver; van Sinderen, Marten J.; Ferreira Pires, Luis

    2000-01-01

    Component-based software development enables the construction of software artefacts by assembling prefabricated, configurable and independently evolving building blocks, called software components. This paper presents an approach for the development of component-based software artefacts. This

  16. Runtime Concepts of Hierarchical Software Components

    Czech Academy of Sciences Publication Activity Database

    Bureš, Tomáš; Hnětynka, P.; Plášil, František

    2007-01-01

    Roč. 8, special (2007), s. 454-463 ISSN 1525-9293 R&D Projects: GA AV ČR 1ET400300504 Institutional research plan: CEZ:AV0Z10300504 Keywords : component-based development * hierarchical components * connectors * controlers * runtime environment Subject RIV: JC - Computer Hardware ; Software

  17. Composing simulations using persistent software components

    Energy Technology Data Exchange (ETDEWEB)

    Holland, J.V.; Michelsen, R.E.; Powell, D.R.; Upton, S.C.; Thompson, D.R.

    1999-03-01

    The traditional process for developing large-scale simulations is cumbersome, time consuming, costly, and in some cases, inadequate. The topics of software components and component-based software engineering are being explored by software professionals in academic and industrial settings. A component is a well-delineated, relatively independent, and replaceable part of a software system that performs a specific function. Many researchers have addressed the potential to derive a component-based approach to simulations in general, and a few have focused on military simulations in particular. In a component-based approach, functional or logical blocks of the simulation entities are represented as coherent collections of components satisfying explicitly defined interface requirements. A simulation is a top-level aggregate comprised of a collection of components that interact with each other in the context of a simulated environment. A component may represent a simulation artifact, an agent, or any entity that can generated events affecting itself, other simulated entities, or the state of the system. The component-based approach promotes code reuse, contributes to reducing time spent validating or verifying models, and promises to reduce the cost of development while still delivering tailored simulations specific to analysis questions. The Integrated Virtual Environment for Simulation (IVES) is a composition-centered framework to achieve this potential. IVES is a Java implementation of simulation composition concepts developed at Los Alamos National Laboratory for use in several application domains. In this paper, its use in the military domain is demonstrated via the simulation of dismounted infantry in an urban environment.

  18. A Combined Approach for Component-based Software Design

    NARCIS (Netherlands)

    Guareis de farias, Cléver; van Sinderen, Marten J.; Ferreira Pires, Luis; Quartel, Dick; Baldoni, R.

    2001-01-01

    Component-based software development enables the construction of software artefacts by assembling binary units of production, distribution and deployment, the so-called software components. Several approaches addressing component-based development have been proposed recently. Most of these

  19. The TASC Wheel Supports a Honey Bee Challenge

    Science.gov (United States)

    Seeley, Claire

    2011-01-01

    The concept of TASC (Thinking Actively in a Social Context) was created by Belle Wallace (Wallace et al., 1993) as a model that can be used to nurture and develop thinking skills. As children work through the TASC wheel, the teacher has a very good opportunity to facilitate explicit conversations about thinking. This allows the children to grow in…

  20. Software Components and Formal Methods from a Computational Viewpoint

    OpenAIRE

    Lambertz, Christian

    2012-01-01

    Software components and the methodology of component-based development offer a promising approach to master the design complexity of huge software products because they separate the concerns of software architecture from individual component behavior and allow for reusability of components. In combination with formal methods, the specification of a formal component model of the later software product or system allows for establishing and verifying important system properties in an automatic a...

  1. Decision criteria for software component sourcing: steps towards a framework

    NARCIS (Netherlands)

    Kusters, R.J.; Pouwelse, L.; Martin, H.; Trienekens, J.J.M.; Hammoudi, Sl.; Maciaszek, L.; Missikoff, M.M.; Camp, O.; Cordeiro, J.

    2016-01-01

    Software developing organizations nowadays have a wide choice when it comes to sourcing software components. This choice ranges from developing or adapting in-house developed components via buying closed source components to utilizing open source components. This study seeks to determine criteria

  2. Component-based development of software language engineering tools

    NARCIS (Netherlands)

    Ssanyu, J.; Hemerik, C.

    2011-01-01

    In this paper we outline how Software Language Engineering (SLE) could benefit from Component-based Software Development (CBSD) techniques and present an architecture aimed at developing a coherent set of lightweight SLE components, fitting into a general-purpose component framework. In order to

  3. A Code Generator for Software Component Services in Smart Devices

    OpenAIRE

    Ahmad, Manzoor

    2010-01-01

    A component is built to be reused and reusability has significant impact on component generality and flexibility requirement. A component model plays a critical role in reusability of software component and defines a set of standards for component implementation, evolution, composition, deployment and standardization of the run-time environment for execution of component. In component based development (CBD), standardization of the runtime environment includes specification of component’s int...

  4. System Risk Balancing Profiles: Software Component

    Science.gov (United States)

    Kelly, John C.; Sigal, Burton C.; Gindorf, Tom

    2000-01-01

    The Software QA / V&V guide will be reviewed and updated based on feedback from NASA organizations and others with a vested interest in this area. Hardware, EEE Parts, Reliability, and Systems Safety are a sample of the future guides that will be developed. Cost Estimates, Lessons Learned, Probability of Failure and PACTS (Prevention, Avoidance, Control or Test) are needed to provide a more complete risk management strategy. This approach to risk management is designed to help balance the resources and program content for risk reduction for NASA's changing environment.

  5. Gazing through Windows at component software development

    International Nuclear Information System (INIS)

    Foster, David

    1996-01-01

    What has been presented here is an overview of the architectural plan for distributed computing by Microsoft. The business opportunity is tied to the rapid growth of consumer computing which is happening now and will continue far into the future. Being able to create a logically centralized, through the use of interface standards, and physically distributed computing environment where anyone can provide services is major challenge. Managing complexity and creating a consistent framework through the use of componentware technology is paramount to its success. The ability to scale distributed processing, manage diverse groups involved in data analysis and facilitate collaboration at all levels are the business processes of particular interest to the HEP community. In realizing the business opportunity they see, Microsoft and others, will help solve many of the basic problems facing HEP in the next ten years. By closely tracking the software developments and investing in understanding the technologies presented here, HEP will gain great benefit from commodity computing. (author)

  6. Educational Technologies Based on Software Components

    Directory of Open Access Journals (Sweden)

    Marian DARDALA

    2006-01-01

    Full Text Available Informatics technologies allow to easily develop and adapt e-learning systems. In order to be used by any users, the system must be developed to permit the lessons construction in a dynamic way. The component technology is a solution to this problem and offers the possibility to define the basic objects that will be connected at the run time to develop the personalized e-lessons.

  7. A Component-Oriented Programming for Embedded Mobile Robot Software

    Directory of Open Access Journals (Sweden)

    Safaai Deris

    2008-11-01

    Full Text Available Applying software reuse to many Embedded Real-Time (ERT systems poses significant challenges to industrial software processes due to the resource-constrained and real-time requirements of the systems. Autonomous Mobile Robot (AMR system is a class of ERT systems, hence, inherits the challenge of applying software reuse in general ERT systems. Furthermore, software reuse in AMR systems is challenged by the diversities in terms of robot physical size and shape, environmental interaction and implementation platform. Thus, it is envisioned that component-based software engineering will be the suitable way to promote software reuse in AMR systems with consideration to general requirements to be self-contained, platform-independent and real-time predictable. A framework for component-oriented programming for AMR software development using PECOS component model is proposed in this paper. The main features of this framework are: (1 use graphical representation for components definition and composition; (2 target C language for optimal code generation with resource-constrained micro-controller; and (3 minimal requirement for run-time support. Real-time implementation indicates that, the PECOS component model together with the proposed framework is suitable for resource constrained embedded AMR systems software development.

  8. Software Atom: An approach towards software components structuring to improve reusability

    Directory of Open Access Journals (Sweden)

    Muhammad Hussain Mughal

    2017-12-01

    Full Text Available Diversity of application domain compelled to design sustainable classification scheme for significantly amassing software repository. The atomic reusable software components are articulated to improve the software component reusability in volatile industry.  Numerous approaches of software classification have been proposed over past decades. Each approach has some limitations related to coupling and cohesion. In this paper, we proposed a novel approach by constituting the software based on radical functionalities to improve software reusability. We analyze the element's semantics in Periodic Table used in chemistry to design our classification approach, and present this approach using tree-based classification to curtail software repository search space complexity and further refined based on semantic search techniques. We developed a Global unique Identifier (GUID for indexing the functions and related components. We have exploited the correlation between chemistry element and software elements to simulate one to one mapping between them. Our approach is inspired from sustainability chemical periodic table. We have proposed software periodic table (SPT representing atomic software components extracted from real application software. Based on SPT classified repository tree parsing & extraction to enable the user to program their software by customizing the ingredients of software requirements. The classified repository of software ingredients assist user to exploits their requirements to software engineer and enable requirement engineer to develop a rapid large-scale prototype with great essence. Furthermore, we would predict the usability of the categorized repository based on feedback of users.  The continuous evolution of that proposed repository will be fine-tuned based on utilization and SPT would be gradually optimized by ant colony optimization techniques. Succinctly would provoke automating the software development process.

  9. Tips for Finding the Right Partner. A TASC Resource Guide

    Science.gov (United States)

    ExpandED Schools, 2014

    2014-01-01

    ExpandED Schools (formerly TASC) has spent the past 17 years helping schools and community organizations find the right partners. This resource guide offers a guide to the strategic questions school teams might ask themselves and their potential partners to have the best outcomes for young people. The following attachment is included: School…

  10. Transactions in Software Components: Container-Interposed Transactions

    Czech Academy of Sciences Publication Activity Database

    Procházka, M.; Plášil, František

    2002-01-01

    Roč. 3, č. 2 (2002), s. - ISSN 1525-9293 R&D Projects: GA ČR GA201/99/0244; GA AV ČR IAA2030902 Institutional research plan: AV0Z1030915 Keywords : transactions * component-based software architectures * transaction propagation policy * transaction attributes * container -interposed transactions Subject RIV: JC - Computer Hardware ; Software

  11. Component-Based Software Engineering and Runtime Type Definition

    OpenAIRE

    A. R. Shakurov

    2011-01-01

    The component-based approach to software engineering, its current implementations and their limitations are discussed. A new extended architecture for such systems is presented. Its main architectural concepts and principles are considered.

  12. Integration of Simulink Models with Component-based Software Models

    Directory of Open Access Journals (Sweden)

    MARIAN, N.

    2008-06-01

    Full Text Available Model based development aims to facilitate the development of embedded control systems by emphasizing the separation of the design level from the implementation level. Model based design involves the use of multiple models that represent different views of a system, having different semantics of abstract system descriptions. Usually, in mechatronics systems, design proceeds by iterating model construction, model analysis, and model transformation. Constructing a MATLAB/Simulink model, a plant and controller behavior is simulated using graphical blocks to represent mathematical and logical constructs and process flow, then software code is generated. A Simulink model is a representation of the design or implementation of a physical system that satisfies a set of requirements. A software component-based system aims to organize system architecture and behavior as a means of computation, communication and constraints, using computational blocks and aggregates for both discrete and continuous behavior, different interconnection and execution disciplines for event-based and time-based controllers, and so on, to encompass the demands to more functionality, at even lower prices, and with opposite constraints. COMDES (Component-based Design of Software for Distributed Embedded Systems is such a component-based system framework developed by the software engineering group of Mads Clausen Institute for Product Innovation (MCI, University of Southern Denmark. Once specified, the software model has to be analyzed. One way of doing that is to integrate in wrapper files the model back into Simulink S-functions, and use its extensive simulation features, thus allowing an early exploration of the possible design choices over multiple disciplines. The paper describes a safe translation of a restricted set of MATLAB/Simulink blocks to COMDES software components, both for continuous and discrete behavior, and the transformation of the software system into the S

  13. FY1995 study of very flexible software structures based on soft-software components; 1995 nendo yawarankana software buhin ni motozuku software no choju kozo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The purpose of this study is to develop the method and tools for changing the software structure flexibly along with the continuous continuous change of its environment and conditions of use. The goal is the software of very high adaptability by using soft-software components and flexible assembly. The CASE tool platform Sapid based on a fine-grained repository was developed and enforced for raising the abstraction level of program code and for mining potential flexible components. To reconstruct the software adaptable to a required environment, the SQM (Software Quark Model) was used in managing interconnectivity and other semantic relationships of among components. On these two basic systems, we developed various methods and tools such as those for static and dynamic analysis of very flexible software structures, program transformation description, program pattern extraction and composition component optimization by partial evaluation, component extraction by function slicing, code encapsulation, and component navigation and application. (NEDO)

  14. Component-based software for high-performance scientific computing

    Energy Technology Data Exchange (ETDEWEB)

    Alexeev, Yuri; Allan, Benjamin A; Armstrong, Robert C; Bernholdt, David E; Dahlgren, Tamara L; Gannon, Dennis; Janssen, Curtis L; Kenny, Joseph P; Krishnan, Manojkumar; Kohl, James A; Kumfert, Gary; McInnes, Lois Curfman; Nieplocha, Jarek; Parker, Steven G; Rasmussen, Craig; Windus, Theresa L

    2005-01-01

    Recent advances in both computational hardware and multidisciplinary science have given rise to an unprecedented level of complexity in scientific simulation software. This paper describes an ongoing grass roots effort aimed at addressing complexity in high-performance computing through the use of Component-Based Software Engineering (CBSE). Highlights of the benefits and accomplishments of the Common Component Architecture (CCA) Forum and SciDAC ISIC are given, followed by an illustrative example of how the CCA has been applied to drive scientific discovery in quantum chemistry. Thrusts for future research are also described briefly.

  15. Software, component, and service deployment in computational Grids

    International Nuclear Information System (INIS)

    von Laszewski, G.; Blau, E.; Bletzinger, M.; Gawor, J.; Lane, P.; Martin, S.; Russell, M.

    2002-01-01

    Grids comprise an infrastructure that enables scientists to use a diverse set of distributed remote services and resources as part of complex scientific problem-solving processes. We analyze some of the challenges involved in deploying software and components transparently in Grids. We report on three practical solutions used by the Globus Project. Lessons learned from this experience lead us to believe that it is necessary to support a variety of software and component deployment strategies. These strategies are based on the hosting environment

  16. Component-based software for high-performance scientific computing

    International Nuclear Information System (INIS)

    Alexeev, Yuri; Allan, Benjamin A; Armstrong, Robert C; Bernholdt, David E; Dahlgren, Tamara L; Gannon, Dennis; Janssen, Curtis L; Kenny, Joseph P; Krishnan, Manojkumar; Kohl, James A; Kumfert, Gary; McInnes, Lois Curfman; Nieplocha, Jarek; Parker, Steven G; Rasmussen, Craig; Windus, Theresa L

    2005-01-01

    Recent advances in both computational hardware and multidisciplinary science have given rise to an unprecedented level of complexity in scientific simulation software. This paper describes an ongoing grass roots effort aimed at addressing complexity in high-performance computing through the use of Component-Based Software Engineering (CBSE). Highlights of the benefits and accomplishments of the Common Component Architecture (CCA) Forum and SciDAC ISIC are given, followed by an illustrative example of how the CCA has been applied to drive scientific discovery in quantum chemistry. Thrusts for future research are also described briefly

  17. Integration of Simulink Models with Component-based Software Models

    DEFF Research Database (Denmark)

    Marian, Nicolae

    2008-01-01

    Model based development aims to facilitate the development of embedded control systems by emphasizing the separation of the design level from the implementation level. Model based design involves the use of multiple models that represent different views of a system, having different semantics...... of abstract system descriptions. Usually, in mechatronics systems, design proceeds by iterating model construction, model analysis, and model transformation. Constructing a MATLAB/Simulink model, a plant and controller behavior is simulated using graphical blocks to represent mathematical and logical...... constraints. COMDES (Component-based Design of Software for Distributed Embedded Systems) is such a component-based system framework developed by the software engineering group of Mads Clausen Institute for Product Innovation (MCI), University of Southern Denmark. Once specified, the software model has...

  18. Management of Globally Distributed Component-Based Software Development Projects

    NARCIS (Netherlands)

    J. Kotlarsky (Julia)

    2005-01-01

    textabstractGlobally Distributed Component-Based Development (GD CBD) is expected to become a promising area, as increasing numbers of companies are setting up software development in a globally distributed environment and at the same time are adopting CBD methodologies. Being an emerging area, the

  19. Monitoring extensions for component-based distributed software

    NARCIS (Netherlands)

    Diakov, N.K.; Papir, Z.; van Sinderen, Marten J.; Quartel, Dick

    2000-01-01

    This paper defines a generic class of monitoring extensions to component-based distributed enterprise software. Introducing a monitoring extension to a legacy application system can be very costly. In this paper, we identify the minimum support for application monitoring within the generic

  20. The Node Monitoring Component of a Scalable Systems Software Environment

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Samuel James [Iowa State Univ., Ames, IA (United States)

    2006-01-01

    This research describes Fountain, a suite of programs used to monitor the resources of a cluster. A cluster is a collection of individual computers that are connected via a high speed communication network. They are traditionally used by users who desire more resources, such as processing power and memory, than any single computer can provide. A common drawback to effectively utilizing such a large-scale system is the management infrastructure, which often does not often scale well as the system grows. Large-scale parallel systems provide new research challenges in the area of systems software, the programs or tools that manage the system from boot-up to running a parallel job. The approach presented in this thesis utilizes a collection of separate components that communicate with each other to achieve a common goal. While systems software comprises a broad array of components, this thesis focuses on the design choices for a node monitoring component. We will describe Fountain, an implementation of the Scalable Systems Software (SSS) node monitor specification. It is targeted at aggregate node monitoring for clusters, focusing on both scalability and fault tolerance as its design goals. It leverages widely used technologies such as XML and HTTP to present an interface to other components in the SSS environment.

  1. Software components for medical image visualization and surgical planning

    Science.gov (United States)

    Starreveld, Yves P.; Gobbi, David G.; Finnis, Kirk; Peters, Terence M.

    2001-05-01

    Purpose: The development of new applications in medical image visualization and surgical planning requires the completion of many common tasks such as image reading and re-sampling, segmentation, volume rendering, and surface display. Intra-operative use requires an interface to a tracking system and image registration, and the application requires basic, easy to understand user interface components. Rapid changes in computer and end-application hardware, as well as in operating systems and network environments make it desirable to have a hardware and operating system as an independent collection of reusable software components that can be assembled rapidly to prototype new applications. Methods: Using the OpenGL based Visualization Toolkit as a base, we have developed a set of components that implement the above mentioned tasks. The components are written in both C++ and Python, but all are accessible from Python, a byte compiled scripting language. The components have been used on the Red Hat Linux, Silicon Graphics Iris, Microsoft Windows, and Apple OS X platforms. Rigorous object-oriented software design methods have been applied to ensure hardware independence and a standard application programming interface (API). There are components to acquire, display, and register images from MRI, MRA, CT, Computed Rotational Angiography (CRA), Digital Subtraction Angiography (DSA), 2D and 3D ultrasound, video and physiological recordings. Interfaces to various tracking systems for intra-operative use have also been implemented. Results: The described components have been implemented and tested. To date they have been used to create image manipulation and viewing tools, a deep brain functional atlas, a 3D ultrasound acquisition and display platform, a prototype minimally invasive robotic coronary artery bypass graft planning system, a tracked neuro-endoscope guidance system and a frame-based stereotaxy neurosurgery planning tool. The frame-based stereotaxy module has been

  2. Software Engineering Environment for Component-based Design of Embedded Software

    DEFF Research Database (Denmark)

    Guo, Yu

    2010-01-01

    as well as application models in a computer-aided software engineering environment. Furthermore, component models have been realized following carefully developed design patterns, which provide for an efficient and reusable implementation. The components have been ultimately implemented as prefabricated...... executable objects that can be linked together into an executable application. The development of embedded software using the COMDES framework is supported by the associated integrated engineering environment consisting of a number of tools, which support basic functionalities, such as system modelling......, validation, and executable code generation for specific hardware platforms. Developing such an environment and the associated tools is a highly complex engineering task. Therefore, this thesis has investigated key design issues and analysed existing platforms supporting model-driven software development...

  3. Integration of Simulink Models with Component-based Software Models

    DEFF Research Database (Denmark)

    Marian, Nicolae; Top, Søren

    2008-01-01

    , communication and constraints, using computational blocks and aggregates for both discrete and continuous behaviour, different interconnection and execution disciplines for event-based and time-based controllers, and so on, to encompass the demands to more functionality, at even lower prices, and with opposite...... to be analyzed. One way of doing that is to integrate in wrapper files the model back into Simulink S-functions, and use its extensive simulation features, thus allowing an early exploration of the possible design choices over multiple disciplines. The paper describes a safe translation of a restricted set...... of MATLAB/Simulink blocks to COMDES software components, both for continuous and discrete behaviour, and the transformation of the software system into the S-functions. The general aim of this work is the improvement of multi-disciplinary development of embedded systems with the focus on the relation...

  4. A Longitudinal Study of the e-Market for Software Components

    NARCIS (Netherlands)

    van Hillegersberg, Jos; Traas, Vincent; Dragt, Roland

    2001-01-01

    Component Based Software Development (CBD) holds high promises, but develops its full potential only when software components are traded in a component market. The Internet seems ideal for this purpose and various sources have predicted a bright future for the Internet Software Component Market

  5. Endovascular interventions for TASC II D femoropopliteal lesions.

    Science.gov (United States)

    Baril, Donald T; Chaer, Rabih A; Rhee, Robert Y; Makaroun, Michel S; Marone, Luke K

    2010-06-01

    Advances in endovascular techniques have provided new options in the treatment of complex infrainguinal occlusive lesions. The purpose of this study was to evaluate outcomes of endovascular interventions on TransAtlantic InterSociety (TASC) II D femoropopliteal occlusive disease. All patients undergoing endovascular interventions for femoropopliteal occlusive disease between July 2004 and July 2009 were reviewed. Patient demographics, pre- and postprocedure ankle-brachial indices (ABI) and anatomic factors were analyzed. Outcomes evaluated included primary patency, assisted-patency, secondary patency, predictors of restenosis, and wound healing. Five hundred eighty-five limbs were treated during the period reviewed. The study group included 79 TASC D limbs in 74 patients (mean age 76.5 +/- 11.9 years, male sex: 53%). Fifty-six limbs (71%) underwent treatment for critical limb ischemia, including 42 (53%) with tissue loss. Eleven patients (15%) had previous failed bypasses. Preoperative ABIs were unobtainable for 23 patients, while the remaining 56 had a mean baseline ABI of 0.54 +/- 0.28. There was one periprocedural mortality. Five patients (6.3%) had periprocedural complications. Mean increase in ABI postprocedure was 0.49 +/- 0.35. Follow-up was available for 74 limbs at a mean of 10.7 months (range, 1-35). There were 18 mortalities (24.3%) during the follow-up period. No patient required a major amputation during this follow-up period. Twenty-one limbs (26.6%) experienced restenosis and nine limbs (11.4%) experienced occlusion. Twenty-nine limbs underwent reintervention during the follow-up time, including nine which underwent multiple reinterventions. Primary, assisted-primary, and secondary patency rates at 12 and 24 months were 52.2%, 88.4%, 92.6% and 27.5%, 74.2%, and 88.9%, respectively. Predictors of restenosis/occlusion included hypercholesterolemia, the presence of a popliteal artery stent, and patients who were current or former smokers. Endovascular

  6. 77 FR 35427 - Certain Mobile Devices, Associated Software, and Components Thereof Final Determination of...

    Science.gov (United States)

    2012-06-13

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-744] Certain Mobile Devices, Associated... importation of certain mobile devices, associated software, and components thereof by reason of infringement... importation of certain mobile devices, associated software, and components thereof containing same by reason...

  7. Development of E-learning Software Based Multiplatform Components

    OpenAIRE

    Salamah, Irma; Ganiardi, M. Aris

    2017-01-01

    E-learning software is a product of information and communication technology used to help dynamic and flexible learning process between teacher and student. The software technology was first used in the development of e-learning software in the form of web applications. The advantages of this technology because of the ease in the development, installation, and distribution of data. Along with advances in mobile/wireless electronics technology, e-learning software is adapted to this technology...

  8. Service oriented architecture assessment based on software components

    Directory of Open Access Journals (Sweden)

    Mahnaz Amirpour

    2016-01-01

    Full Text Available Enterprise architecture, with detailed descriptions of the functions of information technology in the organization, tries to reduce the complexity of technology applications resulting in tools with greater efficiency in achieving the objectives of the organization. Enterprise architecture consists of a set of models describing this technology in different components performance as well as various aspects of the applications in any organization. Therefore, information technology development and maintenance management can perform well within organizations. This study aims to suggest a method to identify different types of services in service-oriented architecture analysis step that applies some previous approaches in an integrated form and, based on the principles of software engineering, to provide a simpler and more transparent approach through the expression of analysis details. Advantages and disadvantages of proposals should be evaluated before the implementation and costs allocation. Evaluation methods can better identify strengths and weaknesses of the current situation apart from selecting appropriate model out of several suggestions, and clarify this technology development solution for organizations in the future. We will be able to simulate data and processes flow within the organization by converting the output of the model to colored Petri nets and evaluate and test it by examining various inputs to enterprise architecture before implemented in terms of reliability and response time. A model of application has been studied for the proposed model and the results can describe and design architecture for data.

  9. A Hybrid Hardware and Software Component Architecture for Embedded System Design

    Science.gov (United States)

    Marcondes, Hugo; Fröhlich, Antônio Augusto

    Embedded systems are increasing in complexity, while several metrics such as time-to-market, reliability, safety and performance should be considered during the design of such systems. A component-based design which enables the migration of its components between hardware and software can cope to achieve such metrics. To enable that, we define hybrid hardware and software components as a development artifact that can be deployed by different combinations of hardware and software elements. In this paper, we present an architecture for developing such components in order to construct a repository of components that can migrate between the hardware and software domains to meet the design system requirements.

  10. COTS-based OO-component approach for software inter-operability and reuse (software systems engineering methodology)

    Science.gov (United States)

    Yin, J.; Oyaki, A.; Hwang, C.; Hung, C.

    2000-01-01

    The purpose of this research and study paper is to provide a summary description and results of rapid development accomplishments at NASA/JPL in the area of advanced distributed computing technology using a Commercial-Off--The-Shelf (COTS)-based object oriented component approach to open inter-operable software development and software reuse.

  11. A combined Component-Based Approach for the Design of Distributed Software Systems

    NARCIS (Netherlands)

    Guareis de farias, Cléver; Ferreira Pires, Luis; van Sinderen, Marten J.; Quartel, Dick; Yang, H.; Gupta, S.

    2001-01-01

    Component-based software development enables the construction of software artefacts by assembling binary units of production, distribution and deployment, the so-called components. Several approaches to component-based development have been proposed recently. Most of these approaches are based on

  12. In Search of the Philosopher's Stone: Simulation Composability Versus Component-Based Software Design

    National Research Council Canada - National Science Library

    Bartholet, Robert G; Brogan, David C; Reynolds, Jr., Paul F; Carnahan, Joseph C

    2004-01-01

    The simulation community and the software engineering community are actively conducting research on technology that will make it possible to easily build complex systems by combining existing components...

  13. Application of fuzzy-MOORA method: Ranking of components for reliability estimation of component-based software systems

    Directory of Open Access Journals (Sweden)

    Zeeshan Ali Siddiqui

    2016-01-01

    Full Text Available Component-based software system (CBSS development technique is an emerging discipline that promises to take software development into a new era. As hardware systems are presently being constructed from kits of parts, software systems may also be assembled from components. It is more reliable to reuse software than to create. It is the glue code and individual components reliability that contribute to the reliability of the overall system. Every component contributes to overall system reliability according to the number of times it is being used, some components are of critical usage, known as usage frequency of component. The usage frequency decides the weight of each component. According to their weights, each component contributes to the overall reliability of the system. Therefore, ranking of components may be obtained by analyzing their reliability impacts on overall application. In this paper, we propose the application of fuzzy multi-objective optimization on the basis of ratio analysis, Fuzzy-MOORA. The method helps us find the best suitable alternative, software component, from a set of available feasible alternatives named software components. It is an accurate and easy to understand tool for solving multi-criteria decision making problems that have imprecise and vague evaluation data. By the use of ratio analysis, the proposed method determines the most suitable alternative among all possible alternatives, and dimensionless measurement will realize the job of ranking of components for estimating CBSS reliability in a non-subjective way. Finally, three case studies are shown to illustrate the use of the proposed technique.

  14. 77 FR 16860 - Certain GPS Navigation Products, Components Thereof, and Related Software; Termination of...

    Science.gov (United States)

    2012-03-22

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-783] Certain GPS Navigation Products, Components Thereof, and Related Software; Termination of Investigation on the Basis of Settlement AGENCY: U.S... GPS navigation products, components thereof, and related software, by reason of the infringement of...

  15. An Intuitionistic Fuzzy Methodology for Component-Based Software Reliability Optimization

    DEFF Research Database (Denmark)

    Madsen, Henrik; Grigore, Albeanu; Popenţiuvlǎdicescu, Florin

    2012-01-01

    Component-based software development is the current methodology facilitating agility in project management, software reuse in design and implementation, promoting quality and productivity, and increasing the reliability and performability. This paper illustrates the usage of intuitionistic fuzzy...... degree approach in modelling the quality of entities in imprecise software reliability computing in order to optimize management results. Intuitionistic fuzzy optimization algorithms are proposed to be used for complex software systems reliability optimization under various constraints....

  16. Software Component Clustering and Retrieval: An Entropy-based Fuzzy k-Modes Methodology

    OpenAIRE

    Stylianou, Constantinos; Andreou, Andreas S.

    2008-01-01

    The number of software houses attempting to adopt a component-based development approach is rapidly increasing. However many organisations still find it difficult to complete the shift as it requires them to alter their entire software development process and philosophy. Furthermore, to promote component-based software engineering, organisations must be ready to promote reusability and this can only be attained if the proper framework exists from which a developer can access, search and retri...

  17. Cost estimation in software engineering projects with web components development

    Directory of Open Access Journals (Sweden)

    Javier de Andrés

    2015-01-01

    Full Text Available Existen multitud de modelos propuestos para la predicción de co stes en proyectos de software, al gunos orientados específicamen te para proyectos Web. Este trabajo analiza si los modelos específicos para proyectos Web están justifi cados, examinando el comportami ento diferencial de los costes entre proyectos de desarrollo softwar e Web y no Web. Se analizan dos aspectos del cálculo de costes: las deseconomías de escala, y el im pacto de algunas características de estos proyectos que son utilizadas como cost drivers. Se en uncian dos hipótesis: (a en estos proyect os las deseconomías de escala so n mayores y (b el incremento de coste que provocan los cost dr ivers es menor para los proyectos Web. Se contrastaron estas hipótesis a nalizando un conjunto de proyectos reales. Los resultados sugie ren que ambas hipótesis se cumplen. Por lo tanto, la principal contribu ción a la literatura de esta inv estigación es que el desarrollo de modelos específicos para los proyectos Web está justificado.

  18. Developing Reusable and Reconfigurable Real-Time Software using Aspects and Components

    OpenAIRE

    Tešanović, Aleksandra

    2006-01-01

    Our main focus in this thesis is on providing guidelines, methods, and tools for design, configuration, and analysis of configurable and reusable real-time software, developed using a combination of aspect-oriented and component-based software development. Specifically, we define a reconfigurable real-time component model (RTCOM) that describes how a real-time component, supporting aspects and enforcing information hiding, could efficiently be designed and implemented. In this context, we out...

  19. Integrating environmental component models. Development of a software framework

    NARCIS (Netherlands)

    Schmitz, O.

    2014-01-01

    Integrated models consist of interacting component models that represent various natural and social systems. They are important tools to improve our understanding of environmental systems, to evaluate cause–effect relationships of human–natural interactions, and to forecast the behaviour of

  20. Outcomes of endovascular interventions for TASC II B and C femoropopliteal lesions.

    Science.gov (United States)

    Baril, Donald T; Marone, Luke K; Kim, Justine; Go, Michael R; Chaer, Rabih A; Rhee, Robert Y

    2008-09-01

    To evaluate outcomes of endovascular interventions on femoropopliteal occlusive disease and determine predictors of restenosis of Trans Atlantic Inter-Societal Consensus (TASC) II B and C lesions. All patients undergoing endovascular interventions for femoropopliteal occlusive disease between May 2003 and July 2007 were reviewed. Patient demographics, pre- and post-procedure ankle-brachial indices (ABI), and anatomic factors (including categorization by TASC II classification, lesion length, and runoff vessel status) were analyzed. Outcomes evaluated included freedom from restenoses, freedom from re-intervention, overall patency, and assisted-patency. A total of 237 total limbs were treated during the period reviewed. The study group included 108 TASC B and 32 TASC C limbs in 125 patients (mean age 73.1 +/- 10.4 years, male sex: 59%). Seventy-one percent of patients were Rutherford classification 2/3 while the remaining 29% were Rutherford classification 4/5. Mean follow-up period was 12.7 months (range, 1-52 m). Forty-one (41) limbs experienced restenosis or occlusion at a mean time of 8 months (range, 1-24 m). Freedom from restenosis/occlusion was 58.9% at 12 months and 47.9% at 24 months. Predictors of restenosis included a preoperative ABI <0.5 (hazard ratio [HR] 3.05, 95% confidence interval [CI] 1.36-6.86, P = .007) and hypercholesterolemia (HR 2.42, 95% CI 1.11-5.25, P = .025). Lesion length as a continuous variable (per centimeter) also correlated with a higher risk of restenosis (HR 1.06, 95% CI 1.00-1.12, P = .057). The overall assisted-primary and secondary-patency rates were 87% and 94% respectively at 3 years with no significant differences between TASC B and TASC C limbs. Endovascular interventions for TASC II B and C lesions are associated with restenosis/occlusion rates that are at least as good as those of open femoropopliteal bypass surgery from historical, previously published series. Furthermore, overall assisted-patency rates are excellent

  1. Development of the software for the component reliability database system of Korean nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Han, Sang Hoon; Kim, Seung Hwan; Choi, Sun Young [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2002-03-01

    A study was performed to develop the system for the component reliability database which consists of database system to store the reliability data and softwares to analyze the reliability data.This system is a part of KIND (Korea Information System for Nuclear Reliability Database).The MS-SQL database is used to stores the component population data, component maintenance history, and the results of reliability analysis. Two softwares were developed for the component reliability system. One is the KIND-InfoView for the data storing, retrieving and searching. The other is the KIND-CompRel for the statistical analysis of component reliability. 4 refs., 13 figs., 7 tabs. (Author)

  2. Generation of components for software renovation factories from context-free grammars

    NARCIS (Netherlands)

    Brand, van den M.G.J.; Sellink, M.P.A.; Verhoef, C.

    2000-01-01

    We present an approach for the generation of components for a software renovation factory. These components are generated from a contex-free grammar definition that recognizes the code that has to be renovated. We generate analysis and transformation components that can be instantiated with a

  3. Proceedings International Workshop on Formal Engineering approaches to Software Components and Architectures

    OpenAIRE

    Kofroň, Jan; Tumova, Jana

    2017-01-01

    These are the proceedings of the 14th International Workshop on Formal Engineering approaches to Software Components and Architectures (FESCA). The workshop was held on April 22, 2017 in Uppsala (Sweden) as a satellite event to the European Joint Conference on Theory and Practice of Software (ETAPS'17). The aim of the FESCA workshop is to bring together junior researchers from formal methods, software engineering, and industry interested in the development and application of formal modelling ...

  4. Proceedings 10th International Workshop on Formal Engineering Approaches to Software Components and Architectures

    OpenAIRE

    Buhnova, Barbora; Happe, Lucia; Kofroň, Jan

    2013-01-01

    These are the proceedings of the 10th International Workshop on Formal Engineering approaches to Software Components and Architectures (FESCA). The workshop was held on March 23, 2013 in Rome (Italy) as a satellite event to the European Joint Conference on Theory and Practice of Software (ETAPS'13). The aim of the FESCA workshop is to bring together both young and senior researchers from formal methods, software engineering, and industry interested in the development and application of formal...

  5. SIMODIS - a software package for simulating nuclear reactor components

    International Nuclear Information System (INIS)

    Guimaraes, Lamartine; Borges, Eduardo M.

    2000-01-01

    In this paper it is presented the initial development effort in building a nuclear reactor component simulation package. This package was developed to be used in the MATLAB simulation environment. It uses the graphical capabilities from MATLAB and the advantages of compiled languages, as for instance FORTRAN and C ++ . From the MATLAB it takes the facilities for better displaying the calculated results. From the compiled languages it takes processing speed. So far models from reactor core, UTSG and OTSG have been developed. Also, a series a user-friendly graphical interfaces have been developed for the above models. As a by product a set of water and sodium thermal and physical properties have been developed and may be used directly as a function from MATLAB, or by being called from a model, as part of its calculation process. The whole set was named SIMODIS, which stands for SIstema MODular Integrado de Simulacao. (author)

  6. Specification and Generation of Environment for Model Checking of Software Components

    Czech Academy of Sciences Publication Activity Database

    Pařízek, P.; Plášil, František

    2007-01-01

    Roč. 176, - (2007), s. 143-154 ISSN 1571-0661 R&D Projects: GA AV ČR 1ET400300504 Institutional research plan: CEZ:AV0Z10300504 Keywords : software components * behavior protocols * model checking * automated generation of environment Subject RIV: JC - Computer Hardware ; Software

  7. RAGE Reusable Game Software Components and Their Integration into Serious Game Engines

    NARCIS (Netherlands)

    Van der Vegt, Wim; Nyamsuren, Enkhbold; Westera, Wim

    2016-01-01

    This paper presents and validates a methodology for integrating reusable software components in diverse game engines. While conforming to the RAGE com-ponent-based architecture described elsewhere, the paper explains how the interac-tions and data exchange processes between a reusable software

  8. A model-based software development methodology for high-end automotive components

    NARCIS (Netherlands)

    Ravanan, Mahmoud

    2014-01-01

    This report provides a model-based software development methodology for high-end automotive components. The V-model is used as a process model throughout the development of the software platform. It offers a framework that simplifies the relation between requirements, design, implementation,

  9. Development of geophysical and geochemical data processing software based on component GIS

    International Nuclear Information System (INIS)

    Ke Dan; Yu Xiang; Wu Qubo; Han Shaoyang; Li Xi

    2013-01-01

    Based on component GIS and mixed programming techniques, a software which combines the basic GIS functions, conventional and unconventional data process methods for the regional geophysical and geochemical data together, is designed and developed. The software has many advantages, such as friendly interface, easy to use and utility functions and provides a useful platform for regional geophysical and geochemical data processing. (authors)

  10. Leveraging Existing Mission Tools in a Re-Usable, Component-Based Software Environment

    Science.gov (United States)

    Greene, Kevin; Grenander, Sven; Kurien, James; z,s (fshir. z[orttr); z,scer; O'Reilly, Taifun

    2006-01-01

    Emerging methods in component-based software development offer significant advantages but may seem incompatible with existing mission operations applications. In this paper we relate our positive experiences integrating existing mission applications into component-based tools we are delivering to three missions. In most operations environments, a number of software applications have been integrated together to form the mission operations software. In contrast, with component-based software development chunks of related functionality and data structures, referred to as components, can be individually delivered, integrated and re-used. With the advent of powerful tools for managing component-based development, complex software systems can potentially see significant benefits in ease of integration, testability and reusability from these techniques. These benefits motivate us to ask how component-based development techniques can be relevant in a mission operations environment, where there is significant investment in software tools that are not component-based and may not be written in languages for which component-based tools even exist. Trusted and complex software tools for sequencing, validation, navigation, and other vital functions cannot simply be re-written or abandoned in order to gain the advantages offered by emerging component-based software techniques. Thus some middle ground must be found. We have faced exactly this issue, and have found several solutions. Ensemble is an open platform for development, integration, and deployment of mission operations software that we are developing. Ensemble itself is an extension of an open source, component-based software development platform called Eclipse. Due to the advantages of component-based development, we have been able to vary rapidly develop mission operations tools for three surface missions by mixing and matching from a common set of mission operation components. We have also had to determine how to

  11. 78 FR 32690 - Certain Gaming and Entertainment Consoles, Related Software, and Components Thereof; Notice of...

    Science.gov (United States)

    2013-05-31

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-752] Certain Gaming and Entertainment... importation of certain gaming and entertainment consoles, related software, and components thereof by reason... violation of [[Page 32691

  12. Uniframe: A Unified Framework for Developing Service-Oriented, Component-Based Distributed Software Systems

    National Research Council Canada - National Science Library

    Raje, Rajeev R; Olson, Andrew M; Bryant, Barrett R; Burt, Carol C; Auguston, Makhail

    2005-01-01

    .... It describes how this approach employs a unifying framework for specifying such systems to unite the concepts of service-oriented architectures, a component-based software engineering methodology...

  13. A Component-based Software Development and Execution Framework for CAx Applications

    Directory of Open Access Journals (Sweden)

    N. Matsuki

    2004-01-01

    Full Text Available Digitalization of the manufacturing process and technologies is regarded as the key to increased competitive ability. The MZ-Platform infrastructure is a component-based software development framework, designed for supporting enterprises to enhance digitalized technologies using software tools and CAx components in a self-innovative way. In the paper we show the algorithm, system architecture, and a CAx application example on MZ-Platform. We also propose a new parametric data structure based on MZ-Platform.

  14. Safety prediction for basic components of safety critical software based on static testing

    International Nuclear Information System (INIS)

    Son, H.S.; Seong, P.H.

    2001-01-01

    The purpose of this work is to develop a safety prediction method, with which we can predict the risk of software components based on static testing results at the early development stage. The predictive model combines the major factor with the quality factor for the components, both of which are calculated based on the measures proposed in this work. The application to a safety-critical software system demonstrates the feasibility of the safety prediction method. (authors)

  15. Safety prediction for basic components of safety-critical software based on static testing

    International Nuclear Information System (INIS)

    Son, H.S.; Seong, P.H.

    2000-01-01

    The purpose of this work is to develop a safety prediction method, with which we can predict the risk of software components based on static testing results at the early development stage. The predictive model combines the major factor with the quality factor for the components, which are calculated based on the measures proposed in this work. The application to a safety-critical software system demonstrates the feasibility of the safety prediction method. (authors)

  16. DOOCS patterns, reusable software components for FPGA based RF GUN field controller

    International Nuclear Information System (INIS)

    Pucyk, P.

    2006-01-01

    Modern accelerator technology combines software and hardware solutions to provide distributed, high efficiency digital systems for High Energy Physics experiments. Providing flexible, maintainable software is crucial for ensuring high availability of the whole system. In order to fulfil all these requirements, appropriate design and development techniques have to be used. Software patterns are well known solution for common programming issues, providing proven development paradigms, which can help to avoid many design issues. DOOCS patterns introduces new concepts of reusable software components for control system algorithms development and implementation in DOOCS framework. Chosen patterns have been described and usage examples have been presented in this paper. (orig.)

  17. DOOCS patterns, reusable software components for FPGA based RF GUN field controller

    Energy Technology Data Exchange (ETDEWEB)

    Pucyk, P. [Institute of Electronic Systems, Warsaw (Poland)

    2006-07-01

    Modern accelerator technology combines software and hardware solutions to provide distributed, high efficiency digital systems for High Energy Physics experiments. Providing flexible, maintainable software is crucial for ensuring high availability of the whole system. In order to fulfil all these requirements, appropriate design and development techniques have to be used. Software patterns are well known solution for common programming issues, providing proven development paradigms, which can help to avoid many design issues. DOOCS patterns introduces new concepts of reusable software components for control system algorithms development and implementation in DOOCS framework. Chosen patterns have been described and usage examples have been presented in this paper. (orig.)

  18. A CORBA BASED ARCHITECTURE FOR ACCESSING REUSABLE SOFTWARE COMPONENTS ON THE WEB.

    Directory of Open Access Journals (Sweden)

    R. Cenk ERDUR

    2003-01-01

    Full Text Available In a very near future, as a result of the continious growth of Internet and advances in networking technologies, Internet will become the common software repository for people and organizations who employ component based reuse approach in their software development life cycles. In order to use the reusable components such as source codes, analysis, designs, design patterns during new software development processes, environments that support the identification of the components over Internet are needed. Basic elements of such an environment are the coordinator programs which deliver user requests to appropriate component libraries, user interfaces for querying, and programs that wrap the component libraries. First, a CORBA based architecture is proposed for such an environment. Then, an alternative architecture that is based on the Java 2 platform technologies is given for the same environment. Finally, the two architectures are compared.

  19. The ATLAS online High Level Trigger framework experience reusing offline software components in the ATLAS trigger

    CERN Document Server

    Wiedenmann, W

    2009-01-01

    Event selection in the Atlas High Level Trigger is accomplished to a large extent by reusing software components and event selection algorithms developed and tested in an offline environment. Many of these offline software modules are not specifically designed to run in a heavily multi-threaded online data flow environment. The Atlas High Level Trigger (HLT) framework based on the Gaudi and Atlas Athena frameworks, forms the interface layer, which allows the execution of the HLT selection and monitoring code within the online run control and data flow software. While such an approach provides a unified environment for trigger event selection across all of Atlas, it also poses strict requirements on the reused software components in terms of performance, memory usage and stability. Experience of running the HLT selection software in the different environments and especially on large multi-node trigger farms has been gained in several commissioning periods using preloaded Monte Carlo events, in data taking peri...

  20. Using MDA for integration of heterogeneous components in software supply chains

    NARCIS (Netherlands)

    Hartmann, Johan Herman; Keren, Mila; Matsinger, Aart; Rubin, Julia; Trew, Tim; Yatzkar-Haham, Tali

    2013-01-01

    Software product lines are increasingly built using components from specialized suppliers. A company that is in the middle of a supply chain has to integrate components from its suppliers and offer (partially configured) products to its customers. To satisfy both the variability required by each

  1. Assume-Guarantee Verification of Software Components in SOFA 2 Framework

    Czech Academy of Sciences Publication Activity Database

    Parízek, P.; Plášil, František

    2010-01-01

    Roč. 4, č. 3 (2010), s. 210-221 ISSN 1751-8806 R&D Projects: GA AV ČR 1ET400300504 Grant - others:GA MŠk(CZ) 7E08004 Institutional research plan: CEZ:AV0Z10300504 Keywords : components * software verification * model checking Subject RIV: JC - Computer Hardware ; Software Impact factor: 0.671, year: 2010

  2. The ATLAS online High Level Trigger framework: Experience reusing offline software components in the ATLAS trigger

    International Nuclear Information System (INIS)

    Wiedenmann, Werner

    2010-01-01

    Event selection in the ATLAS High Level Trigger is accomplished to a large extent by reusing software components and event selection algorithms developed and tested in an offline environment. Many of these offline software modules are not specifically designed to run in a heavily multi-threaded online data flow environment. The ATLAS High Level Trigger (HLT) framework based on the GAUDI and ATLAS ATHENA frameworks, forms the interface layer, which allows the execution of the HLT selection and monitoring code within the online run control and data flow software. While such an approach provides a unified environment for trigger event selection across all of ATLAS, it also poses strict requirements on the reused software components in terms of performance, memory usage and stability. Experience of running the HLT selection software in the different environments and especially on large multi-node trigger farms has been gained in several commissioning periods using preloaded Monte Carlo events, in data taking periods with cosmic events and in a short period with proton beams from LHC. The contribution discusses the architectural aspects of the HLT framework, its performance and its software environment within the ATLAS computing, trigger and data flow projects. Emphasis is also put on the architectural implications for the software by the use of multi-core processors in the computing farms and the experiences gained with multi-threading and multi-process technologies.

  3. Towards a Complete Model for Software Component Deployment on Heterogeneous Platform

    Directory of Open Access Journals (Sweden)

    Švogor Ivan

    2014-12-01

    Full Text Available This report briefly describes an ongoing research related to optimization of allocating software components to heterogeneous computing platform (which includes CPU, GPU and FPGA. Research goal is also presented, along with current hot topics of the research area, related research teams, and finally results and contribution of my research. It involves mathematical modelling which results in goal function, optimization method which finds a suboptimal solution to the goal function and a software modeling tool which enables graphical representation of the problem at hand and help developers determine component placement in the system design phase.

  4. Characterizing and Modeling the Cost of Rework in a Library of Reusable Software Components

    Science.gov (United States)

    Basili, Victor R.; Condon, Steven E.; ElEmam, Khaled; Hendrick, Robert B.; Melo, Walcelio

    1997-01-01

    In this paper we characterize and model the cost of rework in a Component Factory (CF) organization. A CF is responsible for developing and packaging reusable software components. Data was collected on corrective maintenance activities for the Generalized Support Software reuse asset library located at the Flight Dynamics Division of NASA's GSFC. We then constructed a predictive model of the cost of rework using the C4.5 system for generating a logical classification model. The predictor variables for the model are measures of internal software product attributes. The model demonstrates good prediction accuracy, and can be used by managers to allocate resources for corrective maintenance activities. Furthermore, we used the model to generate proscriptive coding guidelines to improve programming, practices so that the cost of rework can be reduced in the future. The general approach we have used is applicable to other environments.

  5. Servicing HEP experiments with a complete set of ready integreated and configured common software components

    International Nuclear Information System (INIS)

    Roiser, Stefan; Gaspar, Ana; Perrin, Yves; Kruzelecki, Karol

    2010-01-01

    The LCG Applications Area at CERN provides basic software components for the LHC experiments such as ROOT, POOL, COOL which are developed in house and also a set of 'external' software packages (70) which are needed in addition such as Python, Boost, Qt, CLHEP, etc. These packages target many different areas of HEP computing such as data persistency, math, simulation, grid computing, databases, graphics, etc. Other packages provide tools for documentation, debugging, scripting languages and compilers. All these packages are provided in a consistent manner on different compilers, architectures and operating systems. The Software Process and Infrastructure project (SPI) [1] is responsible for the continous testing, coordination, release and deployment of these software packages. The main driving force for the actions carried out by SPI are the needs of the LHC experiments, but also other HEP experiments could profit from the set of consistent libraries provided and receive a stable and well tested foundation to build their experiment software frameworks. This presentation will first provide a brief description of the tools and services provided for the coordination, testing, release, deployment and presentation of LCG/AA software packages and then focus on a second set of tools provided for outside LHC experiments to deploy a stable set of HEP related software packages both as binary distribution or from source.

  6. Servicing HEP experiments with a complete set of ready integreated and configured common software components

    Energy Technology Data Exchange (ETDEWEB)

    Roiser, Stefan; Gaspar, Ana; Perrin, Yves [CERN, CH-1211 Geneva 23, PH Department, SFT Group (Switzerland); Kruzelecki, Karol, E-mail: stefan.roiser@cern.c, E-mail: ana.gaspar@cern.c, E-mail: yves.perrin@cern.c, E-mail: karol.kruzelecki@cern.c [CERN, CH-1211 Geneva 23, PH Department, LBC Group (Switzerland)

    2010-04-01

    The LCG Applications Area at CERN provides basic software components for the LHC experiments such as ROOT, POOL, COOL which are developed in house and also a set of 'external' software packages (70) which are needed in addition such as Python, Boost, Qt, CLHEP, etc. These packages target many different areas of HEP computing such as data persistency, math, simulation, grid computing, databases, graphics, etc. Other packages provide tools for documentation, debugging, scripting languages and compilers. All these packages are provided in a consistent manner on different compilers, architectures and operating systems. The Software Process and Infrastructure project (SPI) [1] is responsible for the continous testing, coordination, release and deployment of these software packages. The main driving force for the actions carried out by SPI are the needs of the LHC experiments, but also other HEP experiments could profit from the set of consistent libraries provided and receive a stable and well tested foundation to build their experiment software frameworks. This presentation will first provide a brief description of the tools and services provided for the coordination, testing, release, deployment and presentation of LCG/AA software packages and then focus on a second set of tools provided for outside LHC experiments to deploy a stable set of HEP related software packages both as binary distribution or from source.

  7. 77 FR 40082 - Certain Gaming and Entertainment Consoles, Related Software, and Components Thereof...

    Science.gov (United States)

    2012-07-06

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-745] Certain Gaming and Entertainment... gaming and entertainment consoles, related software, and components thereof by reason of infringement of... finally concluded that an industry exists within the United States that practices the '896, '094, '571...

  8. Use of NMR and NMR Prediction Software to Identify Components in Red Bull Energy Drinks

    Science.gov (United States)

    Simpson, Andre J.; Shirzadi, Azadeh; Burrow, Timothy E.; Dicks, Andrew P.; Lefebvre, Brent; Corrin, Tricia

    2009-01-01

    A laboratory experiment designed as part of an upper-level undergraduate analytical chemistry course is described. Students investigate two popular soft drinks (Red Bull Energy Drink and sugar-free Red Bull Energy Drink) by NMR spectroscopy. With assistance of modern NMR prediction software they identify and quantify major components in each…

  9. Design and Implementation of a Media Access Component at Picsearch Using a Rigorous Software Engineering Approach

    OpenAIRE

    Silva, Diego Núñez

    2011-01-01

    With the arrival of a new generation of sophisticated smartphones, possibilities for mobile video usage are presenting exciting new opportunities. This Master's thesis is based on a collaboration with Picsearch to design and implement a software component that enables the company's video services in Android smartphones.

  10. 76 FR 52970 - In the Matter of Certain Biometric Scanning Devices, Components Thereof, Associated Software, and...

    Science.gov (United States)

    2011-08-24

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-720] In the Matter of Certain Biometric... 17, 2010 based on a complaint filed on May 11, 2010, by Cross Match Technologies, Inc. (``Cross Match... certain biometric scanning devices, components thereof, associated software, and products containing the...

  11. Supporting Social and Cognitive Growth Among Disadvantaged Middle-Grades Students in TASC After-School Projects

    Directory of Open Access Journals (Sweden)

    Christina A. Russell

    2006-09-01

    Full Text Available The field of after-school programming remains rife with unanswered questions. What constitutes quality in after-school programs? Are after-school opportunities valuable for participants regardless of their quality? Are differences in quality associated with differences in participant benefit? This sub-study of the longitudinal evaluation of The After-School Corporation (TASC looks at how after-school opportunities with varying features affect urban middle-grades (6-8 adolescents who live in impoverished circumstances. Supported by the William T. Grant Foundation, the study explores the associations between after-school project features and the social and cognitive outcomes of disadvantaged middle-grades participants in TASC programs. The study relies on data collected during the 2001-02 and 2002-03 school years in eight TASC projects serving middle-grades students.

  12. Computer software program for monitoring the availability of systems and components of electric power generating systems

    International Nuclear Information System (INIS)

    Petersen, T.A.; Hilsmeier, T.A.; Kapinus, D.M.

    1994-01-01

    As availabilities of electric power generating stations systems and components become more and more important from a financial, personnel safety, and regulatory requirements standpoint, it is evident that a comprehensive, yet simple and user-friendly program for system and component tracking and monitoring is needed to assist in effectively managing the large volume of systems and components with their large numbers of associated maintenance/availability records. A user-friendly computer software program for system and component availability monitoring has been developed that calculates, displays and monitors selected component and system availabilities. This is a Windows trademark based (Graphical User Interface) program that utilizes a system flow diagram for the data input screen which also provides a visual representation of availability values and limits for the individual components and associated systems. This program can be customized to the user's plant-specific system and component selections and configurations. As will be discussed herein, this software program is well suited for availability monitoring and ultimately providing valuable information for improving plant performance and reducing operating costs

  13. The RAGE Game Software Components Repository for Supporting Applied Game Development

    Directory of Open Access Journals (Sweden)

    Krassen Stefanov

    2017-09-01

    Full Text Available This paper presents the architecture of the RAGE repository, which is a unique and dedicated infrastructure that provides access to a wide variety of advanced technology components for applied game development. The RAGE project, which is the principal Horizon2020 research and innovation project on applied gaming, develops up to three dozens of software components (RAGE software assets that are reusable across a wide diversity of game engines, game platforms and programming languages. The RAGE repository provides storage space for assets and their artefacts and is designed as an asset life-cycle management system for defining, publishing, updating, searching and packaging for distribution of these assets. It will be embedded in a social platform for asset developers and other users. A dedicated Asset Repository Manager provides the main functionality of the repository and its integration with other systems. Tools supporting the Asset Manager are presented and discussed. When the RAGE repository is in full operation, applied game developers will be able to easily enhance the quality of their games by including selected advanced game software assets. Making available the RAGE repository system and its variety of software assets aims to enhance the coherence and decisiveness of the applied game industry.

  14. The verification methodologies for a software modeling of Engineered Safety Features- Component Control System (ESF-CCS)

    International Nuclear Information System (INIS)

    Lee, Young-Jun; Cheon, Se-Woo; Cha, Kyung-Ho; Park, Gee-Yong; Kwon, Kee-Choon

    2007-01-01

    The safety of a software is not guaranteed through a simple testing of the software. The testing reviews only the static functions of a software. The behavior, dynamic state of a software is not reviewed by a software testing. The Ariane5 rocket accident and the failure of the Virtual Case File Project are determined by a software fault. Although this software was tested thoroughly, the potential errors existed internally. There are a lot of methods to solve these problems. One of the methods is a formal methodology. It describes the software requirements as a formal specification during a software life cycle and verifies a specified design. This paper suggests the methods which verify the design to be described as a formal specification. We adapt these methods to the software of a ESF-CCS (Engineered Safety Features-Component Control System) and use the SCADE (Safety Critical Application Development Environment) tool for adopting the suggested verification methods

  15. Constructing a working taxonomy of functional Ada software components for real-time embedded system applications

    Science.gov (United States)

    Wallace, Robert

    1986-01-01

    A major impediment to a systematic attack on Ada software reusability is the lack of an effective taxonomy for software component functions. The scope of all possible applications of Ada software is considered too great to allow the practical development of a working taxonomy. Instead, for the purposes herein, the scope of Ada software application is limited to device and subsystem control in real-time embedded systems. A functional approach is taken in constructing the taxonomy tree for identified Ada domain. The use of modular software functions as a starting point fits well with the object oriented programming philosophy of Ada. Examples of the types of functions represented within the working taxonomy are real time kernels, interrupt service routines, synchronization and message passing, data conversion, digital filtering and signal conditioning, and device control. The constructed taxonomy is proposed as a framework from which a need analysis can be performed to reveal voids in current Ada real-time embedded programming efforts for Space Station.

  16. Development of software for computing forming information using a component based approach

    Directory of Open Access Journals (Sweden)

    Kwang Hee Ko

    2009-12-01

    Full Text Available In shipbuilding industry, the manufacturing technology has advanced at an unprecedented pace for the last decade. As a result, many automatic systems for cutting, welding, etc. have been developed and employed in the manufacturing process and accordingly the productivity has been increased drastically. Despite such improvement in the manufacturing technology, however, development of an automatic system for fabricating a curved hull plate remains at the beginning stage since hardware and software for the automation of the curved hull fabrication process should be developed differently depending on the dimensions of plates, forming methods and manufacturing processes of each shipyard. To deal with this problem, it is necessary to create a “plug-in” framework, which can adopt various kinds of hardware and software to construct a full automatic fabrication system. In this paper, a framework for automatic fabrication of curved hull plates is proposed, which consists of four components and related software. In particular the software module for computing fabrication information is developed by using the ooCBD development methodology, which can interface with other hardware and software with minimum effort. Examples of the proposed framework applied to medium and large shipyards are presented.

  17. The prototype readout chain for CBM using the AFCK board and its software components

    Science.gov (United States)

    Loizeau, Pierre-Alain; Emscherman, David; Lehnert, Jörg; Müller, Walter F. J.; Yang, Junfeng

    2015-09-01

    This paper presents a prototype for the readout chain of the Compressed Baryonic Matter (CBM) experiment using the AFCK FPGA board as Data Processing Board (DPB). The components of the readout chain are described, followed by some test setups, all based on different flavors of AFCK-DPB. Details about the functional blocks in the different versions of the DPB firmware are given, followed by a description of the corresponding software elements.

  18. Endovascular revascularization of TASC C and D femoropopliteal occlusive disease using carbon dioxide as contrast

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, Cynthia de Almeida; Teivelis, Marcelo Passos; Kuzniec, Sergio; Fukuda, Juliana Maria; Wolosker, Nelson [Hospital Israelita Albert Einstein, São Paulo, SP (Brazil)

    2016-07-01

    To analyze the results of ten angioplasties of TASC C and D femoropopliteal lesions using CO{sub 2} as primary contrast in patients with no formal contraindication to iodine, aiming to decrease allergic reactions and potential nephrotoxicity in high-risk patients. We describe the results of ten angioplasties of TASC C and D femoropopliteal lesions using CO{sub 2} as primary contrast in patients with high risk for open revascularization and no formal contraindication to iodine. We analyzed feasibility of the procedures, complications, quality of the angiographic images, clinical and surgical outcomes, and costs of C and D lesions treated using CO{sub 2} as contrast medium. The use of CO{sub 2} in C and D lesions needed iodine complementation in most of the cases (nine cases) but decreased the potential nephrotoxicity of iodine contrast medium by the reduction of its volume in this group of high-risk patients. The extension of the arterial lesions was the factor that most contributed to the need for iodine supplementation due to the difficulty to visualize the refill after a long arterial occlusion. The use of CO{sub 2} as contrast in patients with C and D lesions with no restriction for iodine contrast medium was an alternative that did not dismiss the need of iodine supplementation in most of the cases, but could decrease the potential nephrotoxicity of iodine constrast medium.

  19. Management of peripheral arterial disease patients: comparing the ACC/AHA and TASC-II guidelines.

    Science.gov (United States)

    Mohler, Emile; Giri, Jay

    2008-09-01

    Peripheral arterial disease (PAD) is a common manifestation of systemic atherosclerosis associated with a high risk of morbidity and mortality from cardiovascular events. Despite this, PAD is often undiagnosed and, therefore, undertreated. The purpose of this review is to highlight and provide clinical insight into the similarities and differences between the available PAD treatment guidelines developed by the American College of Cardiology/American Heart Association (ACC/AHA) and the Trans-Atlantic Inter-Society Consensus II (TASC II) working group. Recommendations from the ACC/AHA 2005 Practice Guidelines for the Management of Patients with Peripheral Arterial Disease (Lower Extremity, Renal, Mesenteric, and Abdominal Aortic) and TASC II Inter-Society Consensus for the Management of Peripheral Arterial users for personal Disease, initiated in 2004 and published in 2007, were compared. Supplemental information was obtained by searching the PubMed and MEDLINE databases using relevant terms. Unintentional bias may have been introduced into the manuscript by not performing a systematic review of the literature with pre-defined search terms. While some variation exists in the content of the recommendations, both documents agree on the need for aggressive management of patients with PAD. In spite of these recommendations, there is a general lack of adherence to the current guidelines-a critical concern considering the high morbidity and mortality associated with the disease. However, the results of ongoing clinical trials may serve to increase awareness of the importance of aggressive management of PAD.

  20. Aquarius' Object-Oriented, Plug and Play Component-Based Flight Software

    Science.gov (United States)

    Murray, Alexander; Shahabuddin, Mohammad

    2013-01-01

    The Aquarius mission involves a combined radiometer and radar instrument in low-Earth orbit, providing monthly global maps of Sea Surface Salinity. Operating successfully in orbit since June, 2011, the spacecraft bus was furnished by the Argentine space agency, Comision Nacional de Actividades Espaciales (CONAE). The instrument, built jointly by NASA's Caltech/JPL and Goddard Space Flight Center, has been successfully producing expectation-exceeding data since it was powered on in August of 2011. In addition to the radiometer and scatterometer, the instrument contains an command & data-handling subsystem with a computer and flight software (FSW) that is responsible for managing the instrument, its operation, and its data. Aquarius' FSW is conceived and architected as a Component-based system, in which the running software consists of a set of Components, each playing a distinctive role in the subsystem, instantiated and connected together at runtime. Component architectures feature a well-defined set of interfaces between the Components, visible and analyzable at the architectural level (see [1]). As we will describe, this kind of an architecture offers significant advantages over more traditional FSW architectures, which often feature a monolithic runtime structure. Component-based software is enabled by Object-Oriented (OO) techniques and languages, the use of which again is not typical in space mission FSW. We will argue in this paper that the use of OO design methods and tools (especially the Unified Modeling Language), as well as the judicious usage of C++, are very well suited to FSW applications, and we will present Aquarius FSW, describing our methods, processes, and design, as a successful case in point.

  1. Operating Experience of Digital, Software-based Components Used in I and C and Electrical Systems in German NPPs

    International Nuclear Information System (INIS)

    Blum, Stefanie; Lochthofen, Andre; Quester, Claudia; Arians, Robert

    2015-01-01

    In recent years, many components in instrumentation and control (I and C) and electrical systems of nuclear power plants (NPPs) were replaced by digital, software-based components. Due to the more complex structure, software-based I and C and electrical components show the potential for new failure mechanisms and an increasing number of failure possibilities, including the potential for common cause failures. An evaluation of the operating experience of digital, software-based components may help to determine new failure modes of these components. In this paper, we give an overview over the results of the evaluation of the operating experience of digital, software-based components used in I and C and electrical systems in NPPs in Germany. (authors)

  2. NASA JPL Distributed Systems Technology (DST) Object-Oriented Component Approach for Software Inter-Operability and Reuse

    Science.gov (United States)

    Hall, Laverne; Hung, Chaw-Kwei; Lin, Imin

    2000-01-01

    The purpose of this paper is to provide a description of NASA JPL Distributed Systems Technology (DST) Section's object-oriented component approach to open inter-operable systems software development and software reuse. It will address what is meant by the terminology object component software, give an overview of the component-based development approach and how it relates to infrastructure support of software architectures and promotes reuse, enumerate on the benefits of this approach, and give examples of application prototypes demonstrating its usage and advantages. Utilization of the object-oriented component technology approach for system development and software reuse will apply to several areas within JPL, and possibly across other NASA Centers.

  3. A configurable component-based software system for magnetic field measurements

    Energy Technology Data Exchange (ETDEWEB)

    Nogiec, J.M.; DiMarco, J.; Kotelnikov, S.; Trombly-Freytag, K.; Walbridge, D.; Tartaglia, M.; /Fermilab

    2005-09-01

    A new software system to test accelerator magnets has been developed at Fermilab. The magnetic measurement technique involved employs a single stretched wire to measure alignment parameters and magnetic field strength. The software for the system is built on top of a flexible component-based framework, which allows for easy reconfiguration and runtime modification. Various user interface, data acquisition, analysis, and data persistence components can be configured to form different measurement systems that are tailored to specific requirements (e.g., involving magnet type or test stand). The system can also be configured with various measurement sequences or tests, each of them controlled by a dedicated script. It is capable of working interactively as well as executing a preselected sequence of tests. Each test can be parameterized to fit the specific magnet type or test stand requirements. The system has been designed with portability in mind and is capable of working on various platforms, such as Linux, Solaris, and Windows. It can be configured to use a local data acquisition subsystem or a remote data acquisition computer, such as a VME processor running VxWorks. All hardware-oriented components have been developed with a simulation option that allows for running and testing measurements in the absence of data acquisition hardware.

  4. A Sociotechnical Negotiation Mechanism to Support Component Markets in Software Ecosystems

    Directory of Open Access Journals (Sweden)

    Rodrigo Santos

    2017-12-01

    Full Text Available Organizations have opened up their software platforms and reusable assets to others, including partners and third-party developers around the world, creating software ecosystems (SECOs. This perspective can contribute to minimize nontechnical barriers of software reuse in industry because it explores potential benefits from the relations among companies and stakeholders. An inhibitor is the complexity in defining value for reusable assets in a scenario where producers try to meet customers’ expectations, and vice-versa. In this paper, we present a value-based mechanism to support component negotiation and socialization processes in a reuse repository in the SECO context as an extension of the Brechó-EcoSys environment. Social resources were integrated into the mechanism in order to aid component negotiation. An evaluation of the negotiation mechanism was initially performed based on an analysis of its elements and functions against critical factors in the negotiation within a SECO, identified in a previous systematic literature review. In addition, an analysis of the social resources supporting the negotiation mechanism was performed against popular sociotechnical elements for SECOs, identified in a previous survey with experts in the field. Finally, the negotiation process and the potential support provided by sociotechnical resources were investigated through an observational study where participants were engaged in some tasks playing as consumer and producers using the sociotechnical negotiation mechanism at Brechó-EcoSys environment. We concluded that sociotechnical resources (e.g., forum and tag cloud support component producers and consumers with useful information from the SECO community.

  5. LEGOS: Object-based software components for mission-critical systems. Final report, June 1, 1995--December 31, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-08-01

    An estimated 85% of the installed base of software is a custom application with a production quantity of one. In practice, almost 100% of military software systems are custom software. Paradoxically, the marginal costs of producing additional units are near zero. So why hasn`t the software market, a market with high design costs and low productions costs evolved like other similar custom widget industries, such as automobiles and hardware chips? The military software industry seems immune to market pressures that have motivated a multilevel supply chain structure in other widget industries: design cost recovery, improve quality through specialization, and enable rapid assembly from purchased components. The primary goal of the ComponentWare Consortium (CWC) technology plan was to overcome barriers to building and deploying mission-critical information systems by using verified, reusable software components (Component Ware). The adoption of the ComponentWare infrastructure is predicated upon a critical mass of the leading platform vendors` inevitable adoption of adopting emerging, object-based, distributed computing frameworks--initially CORBA and COM/OLE. The long-range goal of this work is to build and deploy military systems from verified reusable architectures. The promise of component-based applications is to enable developers to snap together new applications by mixing and matching prefabricated software components. A key result of this effort is the concept of reusable software architectures. A second important contribution is the notion that a software architecture is something that can be captured in a formal language and reused across multiple applications. The formalization and reuse of software architectures provide major cost and schedule improvements. The Unified Modeling Language (UML) is fast becoming the industry standard for object-oriented analysis and design notation for object-based systems. However, the lack of a standard real-time distributed

  6. Simulation of the removal of NET internal components with dynamic modeling software

    International Nuclear Information System (INIS)

    Becquet, M.; Crutzen, Y.R.; Farfaletti-Casali, F.

    1989-01-01

    The replacement of the internal plasma-facing components (first-wall and blanket segments) for maintenance or at the end of their lifetime is an important aspect of the design of the next European torus (NET) and of the remote handling procedures. The first phase of development of the design software tool INVDYN (inverse dynamics) is presented, which will allow optimization of the movements of the internal segments during replacement, taking into account inertial effects and structural deformations. A first analysis of the removal of one NET internal segment provides, for a defined trajectory, the required generalized forces that must be applied on the crane system

  7. InterFace: A software package for face image warping, averaging, and principal components analysis.

    Science.gov (United States)

    Kramer, Robin S S; Jenkins, Rob; Burton, A Mike

    2017-12-01

    We describe InterFace, a software package for research in face recognition. The package supports image warping, reshaping, averaging of multiple face images, and morphing between faces. It also supports principal components analysis (PCA) of face images, along with tools for exploring the "face space" produced by PCA. The package uses a simple graphical user interface, allowing users to perform these sophisticated image manipulations without any need for programming knowledge. The program is available for download in the form of an app, which requires that users also have access to the (freely available) MATLAB Runtime environment.

  8. Software

    Energy Technology Data Exchange (ETDEWEB)

    Macedo, R.; Budd, G.; Ross, E.; Wells, P.

    2010-07-15

    The software section of this journal presented new software programs that have been developed to help in the exploration and development of hydrocarbon resources. Software provider IHS Inc. has made additions to its geological and engineering analysis software tool, IHS PETRA, a product used by geoscientists and engineers to visualize, analyze and manage well production, well log, drilling, reservoir, seismic and other related information. IHS PETRA also includes a directional well module and a decline curve analysis module to improve analysis capabilities in unconventional reservoirs. Petris Technology Inc. has developed a software to help manage the large volumes of data. PetrisWinds Enterprise (PWE) helps users find and manage wellbore data, including conventional wireline and MWD core data; analysis core photos and images; waveforms and NMR; and external files documentation. Ottawa-based Ambercore Software Inc. has been collaborating with Nexen on the Petroleum iQ software for steam assisted gravity drainage (SAGD) producers. Petroleum iQ integrates geology and geophysics data with engineering data in 3D and 4D. Calgary-based Envirosoft Corporation has developed a software that reduces the costly and time-consuming effort required to comply with Directive 39 of the Alberta Energy Resources Conservation Board. The product includes an emissions modelling software. Houston-based Seismic Micro-Technology (SMT) has developed the Kingdom software that features the latest in seismic interpretation. Holland-based Joa Oil and Gas and Calgary-based Computer Modelling Group have both supplied the petroleum industry with advanced reservoir simulation software that enables reservoir interpretation. The 2010 software survey included a guide to new software applications designed to facilitate petroleum exploration, drilling and production activities. Oil and gas producers can use the products for a range of functions, including reservoir characterization and accounting. In

  9. Advances in model-based software for simulating ultrasonic immersion inspections of metal components

    Science.gov (United States)

    Chiou, Chien-Ping; Margetan, Frank J.; Taylor, Jared L.; Engle, Brady J.; Roberts, Ronald A.

    2018-04-01

    Under the sponsorship of the National Science Foundation's Industry/University Cooperative Research Center at ISU, an effort was initiated in 2015 to repackage existing research-grade software into user-friendly tools for the rapid estimation of signal-to-noise ratio (SNR) for ultrasonic inspections of metals. The software combines: (1) a Python-based graphical user interface for specifying an inspection scenario and displaying results; and (2) a Fortran-based engine for computing defect signals and backscattered grain noise characteristics. The later makes use the Thompson-Gray measurement model for the response from an internal defect, and the Thompson-Margetan independent scatterer model for backscattered grain noise. This paper, the third in the series [1-2], provides an overview of the ongoing modeling effort with emphasis on recent developments. These include the ability to: (1) treat microstructures where grain size, shape and tilt relative to the incident sound direction can all vary with depth; and (2) simulate C-scans of defect signals in the presence of backscattered grain noise. The simulation software can now treat both normal and oblique-incidence immersion inspections of curved metal components. Both longitudinal and shear-wave inspections are treated. The model transducer can either be planar, spherically-focused, or bi-cylindrically-focused. A calibration (or reference) signal is required and is used to deduce the measurement system efficiency function. This can be "invented" by the software using center frequency and bandwidth information specified by the user, or, alternatively, a measured calibration signal can be used. Defect types include flat-bottomed-hole reference reflectors, and spherical pores and inclusions. Simulation outputs include estimated defect signal amplitudes, root-mean-square values of grain noise amplitudes, and SNR as functions of the depth of the defect within the metal component. At any particular depth, the user can view

  10. Surgical planning of total hip arthroplasty: accuracy of computer-assisted EndoMap software in predicting component size

    International Nuclear Information System (INIS)

    Davila, Jesse A.; Kransdorf, Mark J.; Duffy, Gavan P.

    2006-01-01

    The purpose of our study was to assess the accuracy of a computer-assisted templating in the surgical planning of patients undergoing total hip arthroplasty utilizing EndoMap software (Siemans AG, Medical Solutions, Erlangen, Germany). Endomap Software is an electronic program that uses DICOM images to analyze standard anteroposterior radiographs for determination of optimal prosthesis component size. We retrospectively reviewed the preoperative radiographs of 36 patients undergoing uncomplicated primary total hip arthroplasty, utilizing EndoMap software, Version VA20. DICOM anteroposterior radiographs were analyzed using standard manufacturer supplied electronic templates to determine acetabular and femoral component sizes. No additional clinical information was reviewed. Acetabular and femoral component sizes were assessed by an orthopedic surgeon and two radiologists. Mean and estimated component size was compared with component size as documented in operative reports. The mean estimated acetabular component size was 53 mm (range 48-60 mm), 1 mm larger than the mean implanted size of 52 mm (range 48-62 mm). Thirty-one of 36 acetabular component sizes (86%) were accurate within one size. The mean calculated femoral component size was 4 (range 2-7), 1 size smaller than the actual mean component size of 5 (range 2-9). Twenty-six of 36 femoral component sizes (72%) were accurate within one size, and accurate within two sizes in all but four cases (94%). EndoMap Software predicted femoral component size well, with 72% within one component size of that used, and 94% within two sizes. Acetabular component size was predicted slightly better with 86% within one component size and 94% within two component sizes. (orig.)

  11. Testing, installation and development of hardware and software components for the forward pixel detector of CMS

    CERN Document Server

    Florez Bustos, Carlos Andres

    2007-01-01

    The LHC (Large Hadron Collider) will be the particle accelerator with the highest collision energy ever. CMS (Compact Muon Solenoid) is one of the two largest experiments at the LHC. A main goal of CMS is to elucidate the electroweak symmetry breaking and determine if the Higgs mechanism is responsible for it. The pixel detector in CMS is the closest detector to the interaction point and is part of the tracker system. This thesis presents four different projects related to the forward pixel detector, performed as part of the testing and development of its hardware and software components. It presents the methods, implementation and results for the data acquisition and installation of the detector control system at the Meson Test Beam Facility of Fermilab for the beam test of the detector; the study of the C.A.E.N power supply and the multi service cable; the layout of the test stands for the assembly of the half-disk and half-service cylinder and the development of a software interface to the data acquisition...

  12. Mid-Term Outcomes of Endovascular Treatment for TASC-II D Femoropopliteal Occlusive Disease with Critical Limb Ischemia

    Energy Technology Data Exchange (ETDEWEB)

    Torres-Blanco, Álvaro, E-mail: atorres658@yahoo.es; Edo-Fleta, Gemma; Gómez-Palonés, Francisco; Molina-Nácher, Vicente; Ortiz-Monzón, Eduardo [Hospital Universitario Dr. Peset, Department of Angiology, Endovascular and Vascular Surgery (Spain)

    2016-03-15

    PurposeThe purpose of the study was to assess the safety and midterm effectiveness of endovascular treatment in Trans-Atlantic Inter-Society Consensus II (TASC-II) D femoropopliteal occlusions in patients with critical limb ischemia (CLI).MethodsPatients with CLI who underwent endovascular treatment for TASC-D de novo femoropopliteal occlusive disease between September 2008 and December 2013 were selected. Data included anatomic features, pre- and postprocedure ankle-brachial index, duplex ultrasound, and periprocedural complications. Sustained clinical improvement, limb salvage rate, freedom from target lesion revascularization (TLR), and freedom from target extremity revascularization (TER) were assessed by Kaplan–Meier estimation and predictors of restenosis/occlusion with Cox analysis.ResultsThirty-two patients underwent treatment of 35 TASC-D occlusions. Mean age was 76 ± 9. Mean lesion length was 23 ± 5 cm. Twenty-eight limbs (80 %) presented tissue loss. Seventeen limbs underwent treatment by stent, 13 by stent-graft, and 5 by angioplasty. Mean follow-up was 29 ± 20 months. Seven patients required major amputation and six patients died during follow-up. Eighteen endovascular and three surgical TLR procedures were performed due to restenosis or occlusion. Estimated freedom from TLR and TER rates at 2 years were 41 and 76 %, whereas estimated primary and secondary patency rates were 41 and 79 %, respectively.ConclusionsEndovascular treatment for TASC II D lesions is safe and offers satisfying outcomes. This patient subset would benefit from a minimally invasive approach. Follow-up is advisable due to a high rate of restenosis. Further follow-up is necessary to know the long-term efficacy of these procedures.

  13. A Component Approach to Collaborative Scientific Software Development: Tools and Techniques Utilized by the Quantum Chemistry Science Application Partnership

    Directory of Open Access Journals (Sweden)

    Joseph P. Kenny

    2008-01-01

    Full Text Available Cutting-edge scientific computing software is complex, increasingly involving the coupling of multiple packages to combine advanced algorithms or simulations at multiple physical scales. Component-based software engineering (CBSE has been advanced as a technique for managing this complexity, and complex component applications have been created in the quantum chemistry domain, as well as several other simulation areas, using the component model advocated by the Common Component Architecture (CCA Forum. While programming models do indeed enable sound software engineering practices, the selection of programming model is just one building block in a comprehensive approach to large-scale collaborative development which must also address interface and data standardization, and language and package interoperability. We provide an overview of the development approach utilized within the Quantum Chemistry Science Application Partnership, identifying design challenges, describing the techniques which we have adopted to address these challenges and highlighting the advantages which the CCA approach offers for collaborative development.

  14. An adaptive neuro fuzzy model for estimating the reliability of component-based software systems

    Directory of Open Access Journals (Sweden)

    Kirti Tyagi

    2014-01-01

    Full Text Available Although many algorithms and techniques have been developed for estimating the reliability of component-based software systems (CBSSs, much more research is needed. Accurate estimation of the reliability of a CBSS is difficult because it depends on two factors: component reliability and glue code reliability. Moreover, reliability is a real-world phenomenon with many associated real-time problems. Soft computing techniques can help to solve problems whose solutions are uncertain or unpredictable. A number of soft computing approaches for estimating CBSS reliability have been proposed. These techniques learn from the past and capture existing patterns in data. The two basic elements of soft computing are neural networks and fuzzy logic. In this paper, we propose a model for estimating CBSS reliability, known as an adaptive neuro fuzzy inference system (ANFIS, that is based on these two basic elements of soft computing, and we compare its performance with that of a plain FIS (fuzzy inference system for different data sets.

  15. Impact of Base Functional Component Types on Software Functional Size based Effort Estimation

    OpenAIRE

    Gencel, Cigdem; Buglione, Luigi

    2008-01-01

    Software effort estimation is still a significant challenge for software management. Although Functional Size Measurement (FSM) methods have been standardized and have become widely used by the software organizations, the relationship between functional size and development effort still needs further investigation. Most of the studies focus on the project cost drivers and consider total software functional size as the primary input to estimation models. In this study, we investigate whether u...

  16. Enhancing requirements engineering for patient registry software systems with evidence-based components.

    Science.gov (United States)

    Lindoerfer, Doris; Mansmann, Ulrich

    2017-07-01

    Patient registries are instrumental for medical research. Often their structures are complex and their implementations use composite software systems to meet the wide spectrum of challenges. Commercial and open-source systems are available for registry implementation, but many research groups develop their own systems. Methodological approaches in the selection of software as well as the construction of proprietary systems are needed. We propose an evidence-based checklist, summarizing essential items for patient registry software systems (CIPROS), to accelerate the requirements engineering process. Requirements engineering activities for software systems follow traditional software requirements elicitation methods, general software requirements specification (SRS) templates, and standards. We performed a multistep procedure to develop a specific evidence-based CIPROS checklist: (1) A systematic literature review to build a comprehensive collection of technical concepts, (2) a qualitative content analysis to define a catalogue of relevant criteria, and (3) a checklist to construct a minimal appraisal standard. CIPROS is based on 64 publications and covers twelve sections with a total of 72 items. CIPROS also defines software requirements. Comparing CIPROS with traditional software requirements elicitation methods, SRS templates and standards show a broad consensus but differences in issues regarding registry-specific aspects. Using an evidence-based approach to requirements engineering for registry software adds aspects to the traditional methods and accelerates the software engineering process for registry software. The method we used to construct CIPROS serves as a potential template for creating evidence-based checklists in other fields. The CIPROS list supports developers in assessing requirements for existing systems and formulating requirements for their own systems, while strengthening the reporting of patient registry software system descriptions. It may be

  17. Reliability Analysis and Optimal Release Problem Considering Maintenance Time of Software Components for an Embedded OSS Porting Phase

    Science.gov (United States)

    Tamura, Yoshinobu; Yamada, Shigeru

    OSS (open source software) systems which serve as key components of critical infrastructures in our social life are still ever-expanding now. Especially, embedded OSS systems have been gaining a lot of attention in the embedded system area, i.e., Android, BusyBox, TRON, etc. However, the poor handling of quality problem and customer support prohibit the progress of embedded OSS. Also, it is difficult for developers to assess the reliability and portability of embedded OSS on a single-board computer. In this paper, we propose a method of software reliability assessment based on flexible hazard rates for the embedded OSS. Also, we analyze actual data of software failure-occurrence time-intervals to show numerical examples of software reliability assessment for the embedded OSS. Moreover, we compare the proposed hazard rate model for the embedded OSS with the typical conventional hazard rate models by using the comparison criteria of goodness-of-fit. Furthermore, we discuss the optimal software release problem for the porting-phase based on the total expected software maintenance cost.

  18. Software Hardware Asset Reuse Enterprise (SHARE) Repository Framework Final Report: Component Specification and Ontology

    National Research Council Canada - National Science Library

    Johnson, Jean; Blais, Curtis

    2008-01-01

    ...) was tasked to develop a component specification and ontology for the SHARE repository. A description of SHARE and the requirements for a component specification and ontology supporting this repository are available in Johnson (2007...

  19. A Pattern Language for the Evolution of Component-based Software Architectures

    DEFF Research Database (Denmark)

    Ahmad, Aakash; Jamshidi, Pooyan; Pahl, Claus

    2013-01-01

    Modern software systems are prone to a continuous evolution under frequently varying requirements. Architecture-centric software evolution enables change in system’s structure and behavior while maintaining a global view of the software to address evolution-centric tradeoffs. Lehman’s law...... evolution problems. We propose that architectural evolution process requires an explicit evolution-centric knowledge – that can be discovered, shared, and reused – to anticipate and guide change management. Therefore, we present a pattern language as a collection of interconnected change patterns......) as a complementary and integrated phase to facilitate reuse-driven architecture change execution (pattern language application). Reuse-knowledge in the proposed pattern language is expressed as a formalised collection of interconnected-patterns. Individual patterns in the language build on each other to facilitate...

  20. 22 CFR 121.8 - End-items, components, accessories, attachments, parts, firmware, software and systems.

    Science.gov (United States)

    2010-04-01

    ... an assembled article ready for its intended use. Only ammunition, fuel or another energy source is...-item without which the end-item is inoperable. (Example: Airframes, tail sections, transmissions, tank..., operating systems and support software for design, implementation, test, operation, diagnosis and repair. A...

  1. Evaluation of Solid Rocket Motor Component Data Using a Commercially Available Statistical Software Package

    Science.gov (United States)

    Stefanski, Philip L.

    2015-01-01

    Commercially available software packages today allow users to quickly perform the routine evaluations of (1) descriptive statistics to numerically and graphically summarize both sample and population data, (2) inferential statistics that draws conclusions about a given population from samples taken of it, (3) probability determinations that can be used to generate estimates of reliability allowables, and finally (4) the setup of designed experiments and analysis of their data to identify significant material and process characteristics for application in both product manufacturing and performance enhancement. This paper presents examples of analysis and experimental design work that has been conducted using Statgraphics®(Registered Trademark) statistical software to obtain useful information with regard to solid rocket motor propellants and internal insulation material. Data were obtained from a number of programs (Shuttle, Constellation, and Space Launch System) and sources that include solid propellant burn rate strands, tensile specimens, sub-scale test motors, full-scale operational motors, rubber insulation specimens, and sub-scale rubber insulation analog samples. Besides facilitating the experimental design process to yield meaningful results, statistical software has demonstrated its ability to quickly perform complex data analyses and yield significant findings that might otherwise have gone unnoticed. One caveat to these successes is that useful results not only derive from the inherent power of the software package, but also from the skill and understanding of the data analyst.

  2. Five-year Irish trial of CLI patients with TASC II type C/D lesions undergoing subintimal angioplasty or bypass surgery based on plaque echolucency.

    LENUS (Irish Health Repository)

    Sultan, Sherif

    2009-06-01

    To report a 5-year observational parallel group study comparing the effectiveness of subintimal angioplasty (SIA) to bypass grafting (BG) for treatment of TASC II type C\\/D lesions in the lower limb arteries of patients with critical limb ischemia (CLI).

  3. Integrated Syntactic/Semantic XML Data Validation with a Reusable Software Component

    Science.gov (United States)

    Golikov, Steven

    2013-01-01

    Data integration is a critical component of enterprise system integration, and XML data validation is the foundation for sound data integration of XML-based information systems. Since B2B e-commerce relies on data validation as one of the critical components for enterprise integration, it is imperative for financial industries and e-commerce…

  4. The migration of femoral components after total hip replacement surgery: accuracy and precision of software-aided measurements

    International Nuclear Information System (INIS)

    Decking, J.; Schuetz, U.; Decking, R.; Puhl, W.

    2003-01-01

    Objective: To assess the accuracy and precision of a software-aided system to measure migration of femoral components after total hip replacement (THR) on digitised radiographs. Design and patients: Subsidence and varus-valgus tilt of THR stems within the femur were measured on digitised anteroposterior pelvic radiographs. The measuring software (UMA, GEMED, Germany) relies on bony landmarks and comparability parameters of two consecutive radiographs. Its accuracy and precision were calculated by comparing it with the gold standard in migration measurements, radiostereometric analysis (RSA). Radiographs and corresponding RSA measurements were performed in 60 patients (38-69 years) following cementless THR surgery. Results and conclusions: The UMA software measured the subsidence of the stems with an accuracy of ±2.5 mm and varus-valgus tilt with an accuracy of ±1.8 (95% confidence interval). A good interobserver and intraobserver reliability was calculated with Cronbach's alpha ranging from 0.86 to 0.97. Measuring the subsidence of THR stems within the femur is an important parameter in the diagnosis of implant loosening. Software systems such as UMA improve the accuracy of migration measurements and are easy to use on routinely performed radiographs of operated hip joints. (orig.)

  5. ROSMOD: A Toolsuite for Modeling, Generating, Deploying, and Managing Distributed Real-time Component-based Software using ROS

    Directory of Open Access Journals (Sweden)

    Pranav Srinivas Kumar

    2016-09-01

    Full Text Available This paper presents the Robot Operating System Model-driven development tool suite, (ROSMOD an integrated development environment for rapid prototyping component-based software for the Robot Operating System (ROS middleware. ROSMOD is well suited for the design, development and deployment of large-scale distributed applications on embedded devices. We present the various features of ROSMOD including the modeling language, the graphical user interface, code generators, and deployment infrastructure. We demonstrate the utility of this tool with a real-world case study: an Autonomous Ground Support Equipment (AGSE robot that was designed and prototyped using ROSMOD for the NASA Student Launch competition, 2014–2015.

  6. Evaluation of components and systems of RSG-GAS and developing of maintenance evaluation software

    International Nuclear Information System (INIS)

    Pane, Jupiter-Sitorus; Kadarusmanto

    2003-01-01

    In order to enhance the evaluation of components and systems, inventarization of failure and repair data has been performed. The evaluation was done by calculating distribution function of failure, failure rate, MTTF, MTTR, and unavailability. The evaluation was comprehend in a code program of SYSCOM-RSG-GAS, that are able to performed statistical analysis, reliability parameters, and Fault Tree Analysis. This paper will describe some results of the program

  7. Integrated Design Software Predicts the Creep Life of Monolithic Ceramic Components

    Science.gov (United States)

    1996-01-01

    Significant improvements in propulsion and power generation for the next century will require revolutionary advances in high-temperature materials and structural design. Advanced ceramics are candidate materials for these elevated-temperature applications. As design protocols emerge for these material systems, designers must be aware of several innate features, including the degrading ability of ceramics to carry sustained load. Usually, time-dependent failure in ceramics occurs because of two different, delayedfailure mechanisms: slow crack growth and creep rupture. Slow crack growth initiates at a preexisting flaw and continues until a critical crack length is reached, causing catastrophic failure. Creep rupture, on the other hand, occurs because of bulk damage in the material: void nucleation and coalescence that eventually leads to macrocracks which then propagate to failure. Successful application of advanced ceramics depends on proper characterization of material behavior and the use of an appropriate design methodology. The life of a ceramic component can be predicted with the NASA Lewis Research Center's Ceramics Analysis and Reliability Evaluation of Structures (CARES) integrated design programs. CARES/CREEP determines the expected life of a component under creep conditions, and CARES/LIFE predicts the component life due to fast fracture and subcritical crack growth. The previously developed CARES/LIFE program has been used in numerous industrial and Government applications.

  8. Long-Term Primary Patency Rate After Nitinol Self-Expandable Stents Implantation in Long, Totally Occluded Femoropopliteal (TASC II C & D) Lesions.

    Science.gov (United States)

    Elmahdy, Mahmoud Farouk; Buonamici, Piergiovanni; Trapani, Maurizio; Valenti, Renato; Migliorini, Angela; Parodi, Guido; Antoniucci, David

    2017-06-01

    Endovascular therapy for long femoropopliteal lesions using percutaneous transluminal balloon angioplasty or first-generation of peripheral stents has been associated with unacceptable one-year restenosis rates. However, with recent advances in equipment and techniques, a better primary patency rate is expected. This study was conducted to detect the long-term primary patency rate of nitinol self-expandable stents implanted in long, totally occluded femoropopliteal lesions TransAtlantic Inter-Society Census (TASC II type C & D), and determine the predictors of reocclusion or restenosis in the stented segments. The demographics, clinical, anatomical, and procedural data of 213 patients with 240 de novo totally occluded femoropopliteal (TASC II type C & D) lesions treated with nitinol self-expandable stents were retrospectively analysed. Of these limbs, 159 (66.2%) presented with intermittent claudication, while 81 (33.8%) presented with critical limb ischaemia. The mean-time of follow-up was 36±22.6 months, (range: 6.3-106.2 months). Outcomes evaluated were, primary patency rate and predictors of reocclusion or restenosis in the stented segments. The mean age of the patients was 70.9±9.3 years, with male gender 66.2%. Mean pre-procedural ABI was 0.45±0.53. One-hundred-and-seventy-five (73%) lesions were TASC II type C, while 65 (27%) were type D lesions. The mean length of the lesions was 17.9±11.3mm. Procedure related complications occurred in 10 (4.1%) limbs. There was no periprocedural mortality. Reocclusion and restenosis were detected during follow-up in 45 and 30 limbs respectively, and all were re-treated by endovascular approach. None of the patients required major amputation. Primary patency rates were 81.4±1.1%, 77.7±1.9% and 74.4±2.8% at 12, 24, and 36 months respectively. Male gender, severe calcification, and TASC II D lesion were independent predictors for reocclusion, while predictors of restenosis were DM, smoking and TASC II D lesions

  9. WebGL and web audio software lightweight components for multimedia education

    Science.gov (United States)

    Chang, Xin; Yuksel, Kivanc; Skarbek, Władysław

    2017-08-01

    The paper presents the results of our recent work on development of contemporary computing platform DC2 for multimedia education usingWebGL andWeb Audio { the W3C standards. Using literate programming paradigm the WEBSA educational tools were developed. It offers for a user (student), the access to expandable collection of WEBGL Shaders and web Audio scripts. The unique feature of DC2 is the option of literate programming, offered for both, the author and the reader in order to improve interactivity to lightweightWebGL andWeb Audio components. For instance users can define: source audio nodes including synthetic sources, destination audio nodes, and nodes for audio processing such as: sound wave shaping, spectral band filtering, convolution based modification, etc. In case of WebGL beside of classic graphics effects based on mesh and fractal definitions, the novel image processing analysis by shaders is offered like nonlinear filtering, histogram of gradients, and Bayesian classifiers.

  10. Innovative Research on the Development of Game-based Tourism Information Services Using Component-based Software Engineering

    Directory of Open Access Journals (Sweden)

    Wei-Hsin Huang

    2018-02-01

    Full Text Available In recent years, a number of studies have been conducted exploring the potential of digital tour guides, that is, multimedia components (e.g., 2D graphic, 3D models, and sound effects that can be integrated into digital storytelling with location-based services. This study uses component-based software engineering to develop the content of game-based tourism information services. The results of this study are combined with 3D VR/AR technology to implement the digital 2D/3D interactive tour guide and show all the attractions’ information on a service platform for the gamification of cultural tourism. Nine kinds of game templates have been built in the component module. Five locations have completed indoor or external 3D VR real scenes and provide online visitors with a virtual tour of the indoor or outdoor attractions. The AR interactive work has three logos. The interactive digital guide includes animated tour guides, interactive guided tours, directions and interactive guides. Based on the usage analysis of the component databases built by this study, VR game types are suited to object-oriented game templates, such as the puzzle game template and the treasure hunt game template. Background music is the database component required for each game. The icons and cue tones are the most commonly used components in 2D graphics and sound effects, but the icons are gathered in different directions to approximate the shape of the component to be consistent. This study built a vivid story of a scene tour for online visitors to enhance the interactive digital guide. However, the developer can rapidly build new digital guides by rearranging the components of the modules to shorten the development time by taking advantage of the usage frequency of various databases that have been built by this study to effectively continue to build and expand the database components. Therefore, more game-based digital tour guides can be created to make better defined high

  11. Use of ROOM in the design of data-acquisition software components

    CERN Document Server

    Carena, W; Van de Vyvre, P; Vascotto, Alessandro

    1999-01-01

    Presentation made at the Real Time Conference, Santa Fe, New Mexico 14-18 June 1999The Event Builder and Distribution System (EBDS) is a component of the data-acquisition architecture of the ALICE experiment at CERN. The purpose of the EBDS is to dispatch the sub-events originated in the detector front-end electronics to the processors of the Event Filter Farm, where the full events are assembled.For the design of the EBDS, we use the Real-time Object-Oriented Modelling method (ROOM), which was chosen because of its powerful modelling paradigm, well suited to this type of application. The use of ROOM is aided by the ObecTime Developer tool set, which fully supports the method and covers all the aspects of the development cycle, from analysis to code generation. Fast prototyping and simulation bring a new perspective to the designer, who can advance by gradual refinements.We describe how ROOM has been used to design a model of both the EBDS and its environment, and the results obtained from the simulation. We ...

  12. Development of internet-based information systems using software components with the emphasis on the application in the military organization

    Directory of Open Access Journals (Sweden)

    Miloš J. Pejanović

    2011-01-01

    Full Text Available The development of personal computers and Internet technology causes continuous changes in methodological approaches and concepts of development of information systems. Most existing information systems, due to their heterogeneity, have a problem of integration of subsystems. In order to overcome this problem, software vendors offer different solutions. In this work we explore different approaches and propose an optimal way, with a special emphasis on its application in the military organization. By applying modern approaches in the development of information systems on the concept of distributed component systems, we come to the set of proposed solutions from different manufacturers. The solutions are related to the mechanisms which should ensure that components written in different languages cooperate with each other in heterogeneous systems that are in different nodes in the computer network. This work describes the concept of component distributed information systems of Internet technology and their capabilities and offers a solution specifying the implementation environment in the military organization. Access to the development of information systems In the development of information systems, an important role is given to the choice of appropriate methods and tools. For large systems such as military organizations, standardized procedures and methodologies for the development of information systems are recommended. There are different methodological approaches in the development of information systems: a systematic integrated approach to development (from design, implementation to implementation and maintenance and development of information systems as technical - technological structures (standard computer and network service. The combination of these two approaches leads to the concept of 'open systems' that allow different standards and IT services to operate on these systems. The UML system description of the process of software

  13. Identification of Water Quality Significant Parameter with Two Transformation/Standardization Methods on Principal Component Analysis and Scilab Software

    Directory of Open Access Journals (Sweden)

    Jovan Putranda

    2016-09-01

    Full Text Available Water quality monitoring is prone to encounter error on its recording or measuring process. The monitoring on river water quality not only aims to recognize the water quality dynamic, but also to evaluate the data to create river management policy and water pollution in order to maintain the continuity of human health or sanitation requirement, and biodiversity preservation. Evaluation on water quality monitoring needs to be started by identifying the important water quality parameter. This research objected to identify the significant parameters by using two transformation or standardization methods on water quality data, which are the river Water Quality Index, WQI (Indeks Kualitas Air, Sungai, IKAs transformation or standardization method and transformation or standardization method with mean 0 and variance 1; so that the variability of water quality parameters could be aggregated with one another. Both of the methods were applied on the water quality monitoring data which its validity and reliability have been tested. The PCA, Principal Component Analysis (Analisa Komponen Utama, AKU, with the help of Scilab software, has been used to process the secondary data on water quality parameters of Gadjah Wong river in 2004-2013, with its validity and reliability has been tested. The Scilab result was cross examined with the result from the Excel-based Biplot Add In software. The research result showed that only 18 from total 35 water quality parameters that have passable data quality. The two transformation or standardization data methods gave different significant parameter type and amount result. On the transformation or standardization mean 0 variances 1, there were water quality significant parameter dynamic to mean concentration of each water quality parameters, which are TDS, SO4, EC, TSS, NO3N, COD, BOD5, Grease Oil and NH3N. On the river WQI transformation or standardization, the water quality significant parameter showed the level of

  14. A Platform for the Development and the Validation of HW IP Components Starting from Reference Software Specifications

    Directory of Open Access Journals (Sweden)

    2009-02-01

    Full Text Available Signal processing algorithms become more and more efficient as a result of the developments of new standards. It is particularly true in the field video compression. However, at each improvement in efficiency and functionality, the complexity of the algorithms is also increasing. Textual specifications, that in the past were the original form of specifications, have been substituted by reference software which became the starting point of any design flow leading to implementation. Therefore, designing an embedded application has become equivalent to port a generic software on a, possibly heterogeneous, embedded platform. Such operation is getting more and more difficult because of the increased algorithm complexity and the wide range of architectural solutions. This paper describes a new platform aiming at supporting a step-by-step mapping of reference software (i.e., generic and nonoptimized software into software and hardware implementations. The platform provides a seamless interface between the software and hardware environments with profiling capabilities for the analysis of data transfers between hardware and software. Such profiling capabilities help the designer to achieve different implementations aiming at specific objectives such as the optimization of hardware processing resources, of the memory architectures, or the minimization of data transfers to reach low-power designs.

  15. Computer software.

    Science.gov (United States)

    Rosenthal, L E

    1986-10-01

    Software is the component in a computer system that permits the hardware to perform the various functions that a computer system is capable of doing. The history of software and its development can be traced to the early nineteenth century. All computer systems are designed to utilize the "stored program concept" as first developed by Charles Babbage in the 1850s. The concept was lost until the mid-1940s, when modern computers made their appearance. Today, because of the complex and myriad tasks that a computer system can perform, there has been a differentiation of types of software. There is software designed to perform specific business applications. There is software that controls the overall operation of a computer system. And there is software that is designed to carry out specialized tasks. Regardless of types, software is the most critical component of any computer system. Without it, all one has is a collection of circuits, transistors, and silicone chips.

  16. Research of component-based software development approach in RFID field%RFID领域软件构件化开发技术研究

    Institute of Scientific and Technical Information of China (English)

    徐孟娟; 杨威

    2012-01-01

    将软件构件化开发技术应用至RFID领域.基于领域工程的分析方法,对RFID领域内变化性需求进行封装、隔离和抽象,分析出RFID体系架构,提炼出RFID软件构件模型。针对构件的管理,研究了RFID构件的分类方法,提出刻面分类法.并详细描述RFID软件构件分类的刻面及每个刻面的术语空间。%Component-based software development approach had been applied in RFID field in this paper. Based on the analysis method of domain engineering, to encapsulate isolate and abstract the demands within the area of RFID , the RFID software component model had been extracted after its architecture was analyzed. For the management of the component, faceted classification method, a detailed description of the space and each facet terms of RFID software component had been given in the paper.

  17. Low-level profiling and MARTE-compatible modeling of software components for real-time systems

    NARCIS (Netherlands)

    Triantafyllidis, K.; Bondarev, E.; With, de P.H.N.

    2012-01-01

    In this paper, we present a method for (a) profiling of individual components at high accuracy level, (b) modeling of the components with the accurate data obtained from profiling, and (c) model conversion to the MARTE profile. The resulting performance models of individual components are used at

  18. Core component integration tests for the back-end software sub-system in the ATLAS data acquisition and event filter prototype -1 project

    International Nuclear Information System (INIS)

    Badescu, E.; Caprini, M.; Niculescu, M.; Radu, A.

    2000-01-01

    The ATLAS data acquisition (DAQ) and Event Filter (EF) prototype -1 project was intended to produce a prototype system for evaluating candidate technologies and architectures for the final ATLAS DAQ system on the LHC accelerator at CERN. Within the prototype project, the back-end sub-system encompasses the software for configuring, controlling and monitoring the DAQ. The back-end sub-system includes core components and detector integration components. The core components provide the basic functionality and had priority in terms of time-scale for development in order to have a baseline sub-system that can be used for integration with the data-flow sub-system and event filter. The following components are considered to be the core of the back-end sub-system: - Configuration databases, describe a large number of parameters of the DAQ system architecture, hardware and software components, running modes and status; - Message reporting system (MRS), allows all software components to report messages to other components in the distributed environment; - Information service (IS) allows the information exchange for software components; - Process manager (PMG), performs basic job control of software components (start, stop, monitoring the status); - Run control (RC), controls the data taking activities by coordinating the operations of the DAQ sub-systems, back-end software and external systems. Performance and scalability tests have been made for individual components. The back-end subsystem integration tests bring together all the core components and several trigger/DAQ/detector integration components to simulate the control and configuration of data taking sessions. For back-end integration tests a test plan was provided. The tests have been done using a shell script that goes through different phases as follows: - starting the back-end server processes to initialize communication services and PMG; - launching configuration specific processes via DAQ supervisor as

  19. Component Provider’s and Tool Developer’s Handbook. Central Archive for Reusable Defense Software (CARDS)

    Science.gov (United States)

    1994-03-25

    metrics [DISA93b]. " The Software Engineering Institute (SET) has developed a domain analysis process (Feature-Oriented Domain Analysis - FODA ) and is...and expresses the range of variability of these decisions. 3.2.2.3 Feature Oriented Domain Analysis Feature Oriented Domain Analysis ( FODA ) is a domain...documents created in this phase. From a purely profit-oriented business point of view, a company may develop its own analysis of a government or commercial

  20. The MyHealthService approach for chronic disease management based on free open source software and low cost components.

    Science.gov (United States)

    Vognild, Lars K; Burkow, Tatjana M; Luque, Luis Fernandez

    2009-01-01

    In this paper we present an approach to building personal health services, supporting following-up, physical exercising, health education, and psychosocial support for the chronically ill, based on free open source software and low-cost computers, mobile devices, and consumer health and fitness devices. We argue that this will lower the cost of the systems, which is important given the increasing number of people with chronicle diseases and limited healthcare budgets.

  1. Development of real time system imaging software for the protection of plasma facing components(PFCs) in Wendelstein 7-X

    Energy Technology Data Exchange (ETDEWEB)

    Ali, Adnan; Jakubowski, Marcin; Sunn Pedersen, Thomas; Rodatos, Alexander [Max-Planck-Institute for Plasma Physics, Greifswald (Germany); Greuner, Henri [Max-Planck-Institute for Plasma Physics, Garching (Germany)

    2016-07-01

    One of the main aims of Wendelstein 7-X, an advanced stellarator in Greifswald, is the investigation of quasi-steady state operation of magnetic fusion devices, for which power exhaust is a very important issue. The predominant fraction of the energy lost from the confined plasma region will be removed by 10 so-called island divertors, which can sustain up to 10 MW/Sq-m. In order to protect the divertor elements from overheating and to monitor power deposition onto the divertor elements, 10 state-of-the-art infrared endoscopes will be installed at W7-X and software is under development for real-time analysis of automatic detection of the hot spots and other abnormal events. The pre-defined algorithms designed for early detection of defects e.g. hotspots, surface layers and delaminations during the discharge are being implemented into the software acquiring the images from the infrared cameras and broadcast them to the main Discharge Control System(DCS). This allows for automatic control of the scenario of the discharge in order to assure safe operation of W7-X. The first online tests of the software will soon be performed at GLADIS in Garching.

  2. Methods and software tools for agro-ecological evaluation at farm level: the livestock component within the SIPEAA project

    Directory of Open Access Journals (Sweden)

    E. Basile

    2010-01-01

    Full Text Available Livestock farms need to adapt to social and economics changes. Often, farmers must take decision in order to: - remain competitive, meanwhile market and public aids change; - reduce impact on environment. Improvement of efficiency seems to be the only way to conciliate these two different needs. Livestock farm are very complex systems involving physical and biologic components.

  3. Use of FPGA to face electronic component obsolescence in software based safety I and C in NPPS

    International Nuclear Information System (INIS)

    Hadj, Abdellah; Bach, Julien; Esmenjaud, Claude; Daumas, Frederic; Salauen, Patrick

    2010-01-01

    In order to extend the life time of their Nuclear Power Plants (NPPs), most utilities are looking for ways to implement the renovation of their existing Instrumentation and Control (I and C) systems. When the I and C to modernize is software based, three paths can be considered: - to keep the legacy microprocessor and limit refurbishment to the associated hardware (i.e. the I/O boards, memories and the CPU board itself), - to move to another I and C platform based on another microprocessor, - to move to a non microprocessor based I and C platform. Software based I and C provide strong advantages such as flexibility and ability to implement advanced functions, however the complexity and the decreasing life time of nowadays microprocessors, mainly developed for the needs of the personal computer market, makes difficult their use and licensing for safety digital I and C systems. Solutions based on re-engineering of legacy microprocessors, or use of microprocessors dedicated to critical application need to be considered. In order to share a prospective vision of the future of I and C systems in NPPs, Electricite de France (EDF) Research and Development division and Rolls-Royce have launched a three year cooperation program on the use of the ASIC/FPGA technology in safety I and C systems. The first step of this program addresses the ability of the ASIC/FPGA technology to provide replacement solutions for former microprocessors taking as example the replacement of the Motorola MC6800 microprocessor. This paper presents the development of an IP cloning the Motorola MC6800 microprocessor, suitable for use in the refurbishment of safety I and C equipment based on this microprocessor. (authors)

  4. Development and application of analytical methods for the assessment of software-based IC components in German nuclear power plants; Entwicklung und Einsatz von Analysemethoden zur Beurteilung softwarebasierter leittechnischer Einrichtungen in deutschen Kernkraftwerken

    Energy Technology Data Exchange (ETDEWEB)

    Arians, Robert; Arnold, Simone; Blum, Stefanie; Buchholz, Marcel; Lochthofen, Andre; Quester, Claudia; Sommer, Dagmar

    2015-03-15

    In this report, results and data from examinations concerning software-based I and C components are evaluated. As failure modes of software-based components and failure causes differ fundamentally from non-software-based components, an evaluation of the operating experience of such components was carried out. This evaluation should show whether or not existing approaches for non-software-based components can be directly transferred to software-based components, or if a different approach has to be developed. The state of the art and science was gathered and is described for the national as well as the international situation. To include failures in non-safety systems, events not fulfilling the incident reporting criteria of German authorities were also included in this evaluation. The data provided by licensees of six German NPPs (different Boiling Water Reactors and Pressurized Water Reactors) was recorded for at least 8 years. The software-based components used in the NPPs are identified and their operating experience is analyzed in order to identify relevant failure modes and to establish a knowledge base for future failure rating.

  5. R PROJECT: SU APLICACIÓN COMO SOFTWARE LIBRE PARA ANÁLISIS EN COMPONENTES PRINCIPALES (R PROJECT: ITS USE AS OPEN SOURCE FOR PRINCIPAL COMPONENTS ANALYSIS

    Directory of Open Access Journals (Sweden)

    Bolaños Guerrero Fabricio

    2011-06-01

    Full Text Available Resumen:Este artículo es producto de un proyecto de investigación realizado en colaboración con profesores de la Escuela de Matemáticas de la Universidad de Costa Rica (UCR, para dar a conocer una opción de software estadístico llamado R Project®. Con este paquete es posible hacer Análisis en Componentes Principales (ACP y representar los resultados usando el Plano Principal y el Círculo de Correlaciones, como herramientas para poder realizar una mejor interpretación de los datos de la tabla (individuos y variables. El software R es de distribución libre, su implementación es sencilla y no requiere de mayores recursos informáticos. Dentro de sus diversas aplicaciones está el ACP, que es una herramienta que se utiliza para la interpretación de la información presentada en una tabla de datos cuantitativos; por lo tanto, las personas investigadoras de diferentes áreas tienen una opción económica y sencilla para realizar Análisis de Datos. Se llevan a cabo dos ejemplos de ACP, donde se muestra un posible uso de la herramienta y se dan las instrucciones sobre cómo realizarlo paso a paso.Abstract: This article is a product of a research project made in collaboration with teachers of the Mathematics School of the University of Costa Rica, in order to show an option of statistical software called “R Project®”. With this software, it is possible to do an Analysis in the Principal Components (PCA and to represent the results using the “principal plane” and the “circle of correlations”, as tools to have a better interpretation of the data in the chart (individuals and variables. The software R is for free distribution, its implementation is simple and it does not require great computer resources. Among its diverse applications there is the PCA, which is a tool used to interpret the information showed in a chart with quantitative data; therefore, the researchers of different areas have a cheap and simple option to do a Data

  6. Superficial femoral artery TASC D Registry: twelve-month effectiveness analysis of the Pulsar-18 SE nitinol stent in patients with critical limb ischemia.

    Science.gov (United States)

    Lichtenberg, M; Stahlhoff, W; Boese, D

    2013-08-01

    Single center observational study analyzing the primary patency rate and freedom from target lesions revascularization rate of the Pulsar-18 nitinol stent after recanalization of long superficial femoral artery (SFA) occlusions (TASC D) in 22 patients with critical limb ischemia (CLI). Between 1/2011 and 7/2011, 22 consecutive patients (9 male, 13 female) with chronic total occlusions (CTO) of the femoro-popliteal arteries presenting with CLI (17 patients with Rutherford 4 score, and 5 patients with Rutherford 5 score) were enrolled and successfully recanalized using the Pulsar-18 self-expanding (SE) nitinol stent (BIOTRONIK AG, Buelach, Switzerland). Primary patency at 12 months was defined as no binary restenosis (>50%) on Duplex ultrasound (PSVRPulsar-18 SE nitinol stent was 77% with a per protocol restenosis in 5 of 22 patients. Seventeen patients showed a walking capacity on treadmill test >300 meters (Rutherford II). Two patients with a documented restenosis were Rutherford, these patients were treated conservatively. Three patients with restenosis and a Rutherford III score were scheduled for an endovascular target lesion revascularization leading to a freedom from target lesion revascularization rate of 86%. Endovascular intervention of long SFA occlusions using subintimal or intraluminal recanalization technique with implantation of the Pulsar-18 SE nitinol stent in CLI patients is safe and clinically effective with a primary patency rate after 12 months of 77% and a freedom from target lesion revascularization rate of 86%.

  7. Package-based software development

    NARCIS (Netherlands)

    Jonge, de M.; Chroust, G.; Hofer, C.

    2003-01-01

    The main goal of component-based software engineering is to decrease development time and development costs of software systems, by reusing prefabricated building blocks. Here we focus on software reuse within the implementation of such component-based applications, and on the corresponding software

  8. A component-based groupware development methodology

    NARCIS (Netherlands)

    Guareis de farias, Cléver; Ferreira Pires, Luis; van Sinderen, Marten J.

    2000-01-01

    Software development in general and groupware applications in particular can greatly benefit from the reusability and interoperability aspects associated with software components. Component-based software development enables the construction of software artefacts by assembling prefabricated,

  9. From Software Development to Software Assembly

    NARCIS (Netherlands)

    Sneed, Harry M.; Verhoef, Chris

    2016-01-01

    The lack of skilled programming personnel and the growing burden of maintaining customized software are forcing organizations to quit producing their own software. It's high time they turned to ready-made, standard components to fulfill their business requirements. Cloud services might be one way to

  10. Ultrasonic TOFD method application for steel components and welds of 10 mm wall thickness using ultrasonic flaw detector and ULTRA7 TOFD software

    International Nuclear Information System (INIS)

    Kasarov, R.; Tabakova, B.

    2008-01-01

    Pressure Vessels inspection is carried out using complex of NDT techniques. A relatively recent technique ultrasonic NDJ is the Time-of-Flight Diffraction (TOFD,) method as an effective method for detection and sizing of flaws. One of the way inspection heavy duty steel elements and welds is to use manual TOFD technique with longitudinal waves at refracted angles of 45 to 70 degrees. Typically inspections using this method have been on steel elements and welds varying from 12 mm to 300 mm wall thickness. In this paper is presented examples of using the TOFD techniques for 10 mm wall thickness using USM 35X5 and ULTRA-7 TOFD software. This software provides TOFD inspection design (PCS, sound path, beam coverage, dead zones) and validation services. The calculations of the two dead zones are derived from relatively trigonometric equation, graphically displayed on a PC-screen and weld frame form. Using ULTRA-7 TOFD the user must move the gate at which the flaw is located on PC-screen to determine the depth of defect. The diffraction points graphically displayed in a weld frame form and analyzed using geometry calculations. (authors)

  11. Software architecture 2

    CERN Document Server

    Oussalah, Mourad Chabanne

    2014-01-01

    Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural templa

  12. Software architecture 1

    CERN Document Server

    Oussalah , Mourad Chabane

    2014-01-01

    Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural template

  13. Software Engineering Program: Software Process Improvement Guidebook

    Science.gov (United States)

    1996-01-01

    The purpose of this document is to provide experience-based guidance in implementing a software process improvement program in any NASA software development or maintenance community. This guidebook details how to define, operate, and implement a working software process improvement program. It describes the concept of the software process improvement program and its basic organizational components. It then describes the structure, organization, and operation of the software process improvement program, illustrating all these concepts with specific NASA examples. The information presented in the document is derived from the experiences of several NASA software organizations, including the SEL, the SEAL, and the SORCE. Their experiences reflect many of the elements of software process improvement within NASA. This guidebook presents lessons learned in a form usable by anyone considering establishing a software process improvement program within his or her own environment. This guidebook attempts to balance general and detailed information. It provides material general enough to be usable by NASA organizations whose characteristics do not directly match those of the sources of the information and models presented herein. It also keeps the ideas sufficiently close to the sources of the practical experiences that have generated the models and information.

  14. Software engineering

    CERN Document Server

    Sommerville, Ian

    2010-01-01

    The ninth edition of Software Engineering presents a broad perspective of software engineering, focusing on the processes and techniques fundamental to the creation of reliable, software systems. Increased coverage of agile methods and software reuse, along with coverage of 'traditional' plan-driven software engineering, gives readers the most up-to-date view of the field currently available. Practical case studies, a full set of easy-to-access supplements, and extensive web resources make teaching the course easier than ever.

  15. Use of Human Modeling Simulation Software in the Task Analysis of the Environmental Control and Life Support System Component Installation Procedures

    Science.gov (United States)

    Estes, Samantha; Parker, Nelson C. (Technical Monitor)

    2001-01-01

    Virtual reality and simulation applications are becoming widespread in human task analysis. These programs have many benefits for the Human Factors Engineering field. Not only do creating and using virtual environments for human engineering analyses save money and time, this approach also promotes user experimentation and provides increased quality of analyses. This paper explains the human engineering task analysis performed on the Environmental Control and Life Support System (ECLSS) space station rack and its Distillation Assembly (DA) subsystem using EAI's human modeling simulation software, Jack. When installed on the International Space Station (ISS), ECLSS will provide the life and environment support needed to adequately sustain crew life. The DA is an Orbital Replaceable Unit (ORU) that provides means of wastewater (primarily urine from flight crew and experimental animals) reclamation. Jack was used to create a model of the weightless environment of the ISS Node 3, where the ECLSS is housed. Computer aided drawings of the ECLSS rack and DA system were also brought into the environment. Anthropometric models of a 95th percentile male and 5th percentile female were used to examine the human interfaces encountered during various ECLSS and DA tasks. The results of the task analyses were used in suggesting modifications to hardware and crew task procedures to improve accessibility, conserve crew time, and add convenience for the crew. This paper will address some of those suggested modifications and the method of presenting final analyses for requirements verification.

  16. A Constructive Approach To Software Evolution

    NARCIS (Netherlands)

    Ciraci, S.; van den Broek, P.M.; Aksit, Mehmet

    2007-01-01

    In many software design and evaluation techniques, either the software evolution problem is not systematically elaborated, or only the impact of evolution is considered. Thus, most of the time software is changed by editing the components of the software system, i.e. breaking down the software

  17. SOFTWARE OPEN SOURCE, SOFTWARE GRATIS?

    Directory of Open Access Journals (Sweden)

    Nur Aini Rakhmawati

    2006-01-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Berlakunya Undang – undang Hak Atas Kekayaan Intelektual (HAKI, memunculkan suatu alternatif baru untuk menggunakan software open source. Penggunaan software open source menyebar seiring dengan isu global pada Information Communication Technology (ICT saat ini. Beberapa organisasi dan perusahaan mulai menjadikan software open source sebagai pertimbangan. Banyak konsep mengenai software open source ini. Mulai dari software yang gratis sampai software tidak berlisensi. Tidak sepenuhnya isu software open source benar, untuk itu perlu dikenalkan konsep software open source mulai dari sejarah, lisensi dan bagaimana cara memilih lisensi, serta pertimbangan dalam memilih software open source yang ada. Kata kunci :Lisensi, Open Source, HAKI

  18. Software Epistemology

    Science.gov (United States)

    2016-03-01

    in-vitro decision to incubate a startup, Lexumo [7], which is developing a commercial Software as a Service ( SaaS ) vulnerability assessment...LTS Label Transition System MUSE Mining and Understanding Software Enclaves RTEMS Real-Time Executive for Multi-processor Systems SaaS Software ...as a Service SSA Static Single Assignment SWE Software Epistemology UD/DU Def-Use/Use-Def Chains (Dataflow Graph)

  19. Software reliability

    CERN Document Server

    Bendell, A

    1986-01-01

    Software Reliability reviews some fundamental issues of software reliability as well as the techniques, models, and metrics used to predict the reliability of software. Topics covered include fault avoidance, fault removal, and fault tolerance, along with statistical methods for the objective assessment of predictive accuracy. Development cost models and life-cycle cost models are also discussed. This book is divided into eight sections and begins with a chapter on adaptive modeling used to predict software reliability, followed by a discussion on failure rate in software reliability growth mo

  20. Software Radar Technology

    Directory of Open Access Journals (Sweden)

    Tang Jun

    2015-08-01

    Full Text Available In this paper, the definition and the key features of Software Radar, which is a new concept, are proposed and discussed. We consider the development of modern radar system technology to be divided into three stages: Digital Radar, Software radar and Intelligent Radar, and the second stage is just commencing now. A Software Radar system should be a combination of various modern digital modular components conformed to certain software and hardware standards. Moreover, a software radar system with an open system architecture supporting to decouple application software and low level hardware would be easy to adopt "user requirements-oriented" developing methodology instead of traditional "specific function-oriented" developing methodology. Compared with traditional Digital Radar, Software Radar system can be easily reconfigured and scaled up or down to adapt to the changes of requirements and technologies. A demonstration Software Radar signal processing system, RadarLab 2.0, which has been developed by Tsinghua University, is introduced in this paper and the suggestions for the future development of Software Radar in China are also given in the conclusion.

  1. The Software Management Environment (SME)

    Science.gov (United States)

    Valett, Jon D.; Decker, William; Buell, John

    1988-01-01

    The Software Management Environment (SME) is a research effort designed to utilize the past experiences and results of the Software Engineering Laboratory (SEL) and to incorporate this knowledge into a tool for managing projects. SME provides the software development manager with the ability to observe, compare, predict, analyze, and control key software development parameters such as effort, reliability, and resource utilization. The major components of the SME, the architecture of the system, and examples of the functionality of the tool are discussed.

  2. Interface-based software testing

    Directory of Open Access Journals (Sweden)

    Aziz Ahmad Rais

    2016-10-01

    Full Text Available Software quality is determined by assessing the characteristics that specify how it should work, which are verified through testing. If it were possible to touch, see, or measure software, it would be easier to analyze and prove its quality. Unfortunately, software is an intangible asset, which makes testing complex. This is especially true when software quality is not a question of particular functions that can be tested through a graphical user interface. The primary objective of software architecture is to design quality of software through modeling and visualization. There are many methods and standards that define how to control and manage quality. However, many IT software development projects still fail due to the difficulties involved in measuring, controlling, and managing software quality. Software quality failure factors are numerous. Examples include beginning to test software too late in the development process, or failing properly to understand, or design, the software architecture and the software component structure. The goal of this article is to provide an interface-based software testing technique that better measures software quality, automates software quality testing, encourages early testing, and increases the software’s overall testability

  3. Software Innovation

    DEFF Research Database (Denmark)

    Rose, Jeremy

      Innovation is the forgotten key to modern systems development - the element that defines the enterprising engineer, the thriving software firm and the cutting edge software application.  Traditional forms of technical education pay little attention to creativity - often encouraging overly...

  4. Software engineering

    CERN Document Server

    Sommerville, Ian

    2016-01-01

    For courses in computer science and software engineering The Fundamental Practice of Software Engineering Software Engineering introduces readers to the overwhelmingly important subject of software programming and development. In the past few years, computer systems have come to dominate not just our technological growth, but the foundations of our world's major industries. This text seeks to lay out the fundamental concepts of this huge and continually growing subject area in a clear and comprehensive manner. The Tenth Edition contains new information that highlights various technological updates of recent years, providing readers with highly relevant and current information. Sommerville's experience in system dependability and systems engineering guides the text through a traditional plan-based approach that incorporates some novel agile methods. The text strives to teach the innovators of tomorrow how to create software that will make our world a better, safer, and more advanced place to live.

  5. Software Components for Serious Game Development

    NARCIS (Netherlands)

    Westera, Wim; Van der Vegt, Wim; Bahreini, Kiavash; Dascalu, Mihai; Van Lankveld, Giel

    2016-01-01

    The large upfront investments required for game development pose a severe barrier for the wider uptake of serious games in education and training. Also, there is a lack of well-established methods and tools that support game developers at preserving and enhancing the games’ pedagogical

  6. Components of a Business Intelligence software solution

    OpenAIRE

    Daniel BALACEANU

    2007-01-01

    Business intelligence (BI) is a business management term which refers to applications and technologies which are used to gather, provide access to, and analyze data and information about company operations. Business intelligence systems can help companies have a more comprehensive knowledge of the factors affecting their business, such as metrics on sales, production, internal operations, and they can help companies to make better business decisions.

  7. Software requirements

    CERN Document Server

    Wiegers, Karl E

    2003-01-01

    Without formal, verifiable software requirements-and an effective system for managing them-the programs that developers think they've agreed to build often will not be the same products their customers are expecting. In SOFTWARE REQUIREMENTS, Second Edition, requirements engineering authority Karl Wiegers amplifies the best practices presented in his original award-winning text?now a mainstay for anyone participating in the software development process. In this book, you'll discover effective techniques for managing the requirements engineering process all the way through the development cy

  8. A software engineering process for safety-critical software application

    International Nuclear Information System (INIS)

    Kang, Byung Heon; Kim, Hang Bae; Chang, Hoon Seon; Jeon, Jong Sun

    1995-01-01

    Application of computer software to safety-critical systems in on the increase. To be successful, the software must be designed and constructed to meet the functional and performance requirements of the system. For safety reason, the software must be demonstrated not only to meet these requirements, but also to operate safely as a component within the system. For longer-term cost consideration, the software must be designed and structured to ease future maintenance and modifications. This paper presents a software engineering process for the production of safety-critical software for a nuclear power plant. The presentation is expository in nature of a viable high quality safety-critical software development. It is based on the ideas of a rational design process and on the experience of the adaptation of such process in the production of the safety-critical software for the shutdown system number two of Wolsung 2, 3 and 4 nuclear power generation plants. This process is significantly different from a conventional process in terms of rigorous software development phases and software design techniques, The process covers documentation, design, verification and testing using mathematically precise notations and highly reviewable tabular format to specify software requirements and software requirements and software requirements and code against software design using static analysis. The software engineering process described in this paper applies the principle of information-hiding decomposition in software design using a modular design technique so that when a change is required or an error is detected, the affected scope can be readily and confidently located. it also facilitates a sense of high degree of confidence in the 'correctness' of the software production, and provides a relatively simple and straightforward code implementation effort. 1 figs., 10 refs. (Author)

  9. Software Reviews.

    Science.gov (United States)

    Dwyer, Donna; And Others

    1989-01-01

    Reviewed are seven software packages for Apple and IBM computers. Included are: "Toxicology"; "Science Corner: Space Probe"; "Alcohol and Pregnancy"; "Science Tool Kit Plus"; Computer Investigations: Plant Growth"; "Climatrolls"; and "Animal Watch: Whales." (CW)

  10. Software Reviews.

    Science.gov (United States)

    Davis, Shelly J., Ed.; Knaupp, Jon, Ed.

    1984-01-01

    Reviewed is computer software on: (1) classification of living things, a tutorial program for grades 5-10; and (2) polynomial practice using tiles, a drill-and-practice program for algebra students. (MNS)

  11. Software Reviews.

    Science.gov (United States)

    Miller, Anne, Ed.; Radziemski, Cathy, Ed.

    1988-01-01

    Three pieces of computer software are described and reviewed: HyperCard, to build and use varied applications; Iggy's Gnees, for problem solving with shapes in grades kindergarten-two; and Algebra Shop, for practicing skills and problem solving. (MNS)

  12. Software reengineering

    Science.gov (United States)

    Fridge, Ernest M., III

    1991-01-01

    Today's software systems generally use obsolete technology, are not integrated properly with other software systems, and are difficult and costly to maintain. The discipline of reverse engineering is becoming prominent as organizations try to move their systems up to more modern and maintainable technology in a cost effective manner. JSC created a significant set of tools to develop and maintain FORTRAN and C code during development of the Space Shuttle. This tool set forms the basis for an integrated environment to re-engineer existing code into modern software engineering structures which are then easier and less costly to maintain and which allow a fairly straightforward translation into other target languages. The environment will support these structures and practices even in areas where the language definition and compilers do not enforce good software engineering. The knowledge and data captured using the reverse engineering tools is passed to standard forward engineering tools to redesign or perform major upgrades to software systems in a much more cost effective manner than using older technologies. A beta vision of the environment was released in Mar. 1991. The commercial potential for such re-engineering tools is very great. CASE TRENDS magazine reported it to be the primary concern of over four hundred of the top MIS executives.

  13. Software Authentication

    International Nuclear Information System (INIS)

    Wolford, J.K.; Geelhood, B.D.; Hamilton, V.A.; Ingraham, J.; MacArthur, D.W.; Mitchell, D.J.; Mullens, J.A.; Vanier, P. E.; White, G.K.; Whiteson, R.

    2001-01-01

    The effort to define guidance for authentication of software for arms control and nuclear material transparency measurements draws on a variety of disciplines and has involved synthesizing established criteria and practices with newer methods. Challenges include the need to protect classified information that the software manipulates as well as deal with the rapid pace of innovation in the technology of nuclear material monitoring. The resulting guidance will shape the design of future systems and inform the process of authentication of instruments now being developed. This paper explores the technical issues underlying the guidance and presents its major tenets

  14. Software engineering

    CERN Document Server

    Thorin, Marc

    1985-01-01

    Software Engineering describes the conceptual bases as well as the main methods and rules on computer programming. This book presents software engineering as a coherent and logically built synthesis and makes it possible to properly carry out an application of small or medium difficulty that can later be developed and adapted to more complex cases. This text is comprised of six chapters and begins by introducing the reader to the fundamental notions of entities, actions, and programming. The next two chapters elaborate on the concepts of information and consistency domains and show that a proc

  15. PyBus -- A Python Software Bus

    OpenAIRE

    Lavrijsen, W

    2005-01-01

    A software bus, just like its hardware equivalent, allows for the discovery, installation, configuration, loading, unloading, and run-time replacement of software components, as well as channeling of inter-component communication. Python, a popular open-source programming language, encourages a modular design on software written in it, but it offers little or no component functionality. However, the language and its interpreter provide sufficient hooks to implement a thin, integral layer...

  16. ORNL's DCAL software package

    International Nuclear Information System (INIS)

    Eckerman, K.F.

    2007-01-01

    Oak Ridge National Laboratory has released its Dose and Risk Calculation software, DCAL. DCAL, developed with the support of the U.S. Environmental Protection Agency, consists of a series of computational modules, driven in either an interactive or a batch mode for computation of dose and risk coefficients from intakes of radionuclides or exposure to radionuclides in environmental media. The software package includes extensive libraries of biokinetic and dosimetric data that represent the current state of the art. The software has unique capability for addressing intakes of radionuclides by non-adults. DCAL runs as 32-bit extended DOS and console applications under Windows 98/NT/2000/XP. It is intended for users familiar with the basic elements of computational radiation dosimetry. Components of DCAL have been used to prepare U.S. Environmental Protection Agency's Federal Guidance Reports 12 and 13 and several publications of the International Commission on Radiological Protection. (author)

  17. Reviews, Software.

    Science.gov (United States)

    Science Teacher, 1988

    1988-01-01

    Reviews two computer software packages for use in physical science, physics, and chemistry classes. Includes "Physics of Model Rocketry" for Apple II, and "Black Box" for Apple II and IBM compatible computers. "Black Box" is designed to help students understand the concept of indirect evidence. (CW)

  18. Software Reviews.

    Science.gov (United States)

    Kinnaman, Daniel E.; And Others

    1988-01-01

    Reviews four educational software packages for Apple, IBM, and Tandy computers. Includes "How the West was One + Three x Four,""Mavis Beacon Teaches Typing,""Math and Me," and "Write On." Reviews list hardware requirements, emphasis, levels, publisher, purchase agreements, and price. Discusses the strengths…

  19. Software Review.

    Science.gov (United States)

    McGrath, Diane, Ed.

    1989-01-01

    Reviewed is a computer software package entitled "Audubon Wildlife Adventures: Grizzly Bears" for Apple II and IBM microcomputers. Included are availability, hardware requirements, cost, and a description of the program. The murder-mystery flavor of the program is stressed in this program that focuses on illegal hunting and game…

  20. Software Reviews.

    Science.gov (United States)

    Teles, Elizabeth, Ed.; And Others

    1990-01-01

    Reviewed are two computer software packages for Macintosh microcomputers including "Phase Portraits," an exploratory graphics tool for studying first-order planar systems; and "MacMath," a set of programs for exploring differential equations, linear algebra, and other mathematical topics. Features, ease of use, cost, availability, and hardware…

  1. MIAWARE Software

    DEFF Research Database (Denmark)

    Wilkowski, Bartlomiej; Pereira, Oscar N. M.; Dias, Paulo

    2008-01-01

    is automatically generated. Furthermore, MIAWARE software is accompanied with an intelligent search engine for medical reports, based on the relations between parts of the lungs. A logical structure of the lungs is introduced to the search algorithm through the specially developed ontology. As a result...

  2. Applied software risk management a guide for software project managers

    CERN Document Server

    Pandian, C Ravindranath

    2006-01-01

    Few software projects are completed on time, on budget, and to their original specifications. Focusing on what practitioners need to know about risk in the pursuit of delivering software projects, Applied Software Risk Management: A Guide for Software Project Managers covers key components of the risk management process and the software development process, as well as best practices for software risk identification, risk planning, and risk analysis. Written in a clear and concise manner, this resource presents concepts and practical insight into managing risk. It first covers risk-driven project management, risk management processes, risk attributes, risk identification, and risk analysis. The book continues by examining responses to risk, the tracking and modeling of risks, intelligence gathering, and integrated risk management. It concludes with details on drafting and implementing procedures. A diary of a risk manager provides insight in implementing risk management processes.Bringing together concepts ...

  3. Flight Software Math Library

    Science.gov (United States)

    McComas, David

    2013-01-01

    The flight software (FSW) math library is a collection of reusable math components that provides typical math utilities required by spacecraft flight software. These utilities are intended to increase flight software quality reusability and maintainability by providing a set of consistent, well-documented, and tested math utilities. This library only has dependencies on ANSI C, so it is easily ported. Prior to this library, each mission typically created its own math utilities using ideas/code from previous missions. Part of the reason for this is that math libraries can be written with different strategies in areas like error handling, parameters orders, naming conventions, etc. Changing the utilities for each mission introduces risks and costs. The obvious risks and costs are that the utilities must be coded and revalidated. The hidden risks and costs arise in miscommunication between engineers. These utilities must be understood by both the flight software engineers and other subsystem engineers (primarily guidance navigation and control). The FSW math library is part of a larger goal to produce a library of reusable Guidance Navigation and Control (GN&C) FSW components. A GN&C FSW library cannot be created unless a standardized math basis is created. This library solves the standardization problem by defining a common feature set and establishing policies for the library s design. This allows the libraries to be maintained with the same strategy used in its initial development, which supports a library of reusable GN&C FSW components. The FSW math library is written for an embedded software environment in C. This places restrictions on the language features that can be used by the library. Another advantage of the FSW math library is that it can be used in the FSW as well as other environments like the GN&C analyst s simulators. This helps communication between the teams because they can use the same utilities with the same feature set and syntax.

  4. Finding upper bounds for software failure probabilities - experiments and results

    International Nuclear Information System (INIS)

    Kristiansen, Monica; Winther, Rune

    2005-09-01

    This report looks into some aspects of using Bayesian hypothesis testing to find upper bounds for software failure probabilities. In the first part, the report evaluates the Bayesian hypothesis testing approach for finding upper bounds for failure probabilities of single software components. The report shows how different choices of prior probability distributions for a software component's failure probability influence the number of tests required to obtain adequate confidence in a software component. In the evaluation, both the effect of the shape of the prior distribution as well as one's prior confidence in the software component were investigated. In addition, different choices of prior probability distributions are discussed based on their relevance in a software context. In the second part, ideas on how the Bayesian hypothesis testing approach can be extended to assess systems consisting of multiple software components are given. One of the main challenges when assessing systems consisting of multiple software components is to include dependency aspects in the software reliability models. However, different types of failure dependencies between software components must be modelled differently. Identifying different types of failure dependencies are therefore an important condition for choosing a prior probability distribution, which correctly reflects one's prior belief in the probability for software components failing dependently. In this report, software components include both general in-house software components, as well as pre-developed software components (e.g. COTS, SOUP, etc). (Author)

  5. Software Tools for Software Maintenance

    Science.gov (United States)

    1988-10-01

    COMMUNICATIONS, AND COMPUTER SCIENCES I ,(AIRMICS) FO~SOFTWARE TOOLS (.o FOR SOF1 ’ARE MAINTENANCE (ASQBG-1-89-001) October, 1988 DTIC ELECTE -ifB...SUNWW~. B..c Program An~Iysw HA.c C-Tractr C Cobol Stncturing Facility VS Cobol 11 F-Scan Foctma Futbol Cobol Fortran Sltiuc Code Anaiyaer Fortran IS

  6. GCS component development cycle

    Science.gov (United States)

    Rodríguez, Jose A.; Macias, Rosa; Molgo, Jordi; Guerra, Dailos; Pi, Marti

    2012-09-01

    The GTC1 is an optical-infrared 10-meter segmented mirror telescope at the ORM observatory in Canary Islands (Spain). First light was at 13/07/2007 and since them it is in the operation phase. The GTC control system (GCS) is a distributed object & component oriented system based on RT-CORBA8 and it is responsible for the management and operation of the telescope, including its instrumentation. GCS has used the Rational Unified process (RUP9) in its development. RUP is an iterative software development process framework. After analysing (use cases) and designing (UML10) any of GCS subsystems, an initial component description of its interface is obtained and from that information a component specification is written. In order to improve the code productivity, GCS has adopted the code generation to transform this component specification into the skeleton of component classes based on a software framework, called Device Component Framework. Using the GCS development tools, based on javadoc and gcc, in only one step, the component is generated, compiled and deployed to be tested for the first time through our GUI inspector. The main advantages of this approach are the following: It reduces the learning curve of new developers and the development error rate, allows a systematic use of design patterns in the development and software reuse, speeds up the deliverables of the software product and massively increase the timescale, design consistency and design quality, and eliminates the future refactoring process required for the code.

  7. EPIQR software

    Energy Technology Data Exchange (ETDEWEB)

    Flourentzos, F. [Federal Institute of Technology, Lausanne (Switzerland); Droutsa, K. [National Observatory of Athens, Athens (Greece); Wittchen, K.B. [Danish Building Research Institute, Hoersholm (Denmark)

    1999-11-01

    The support of the EPIQR method is a multimedia computer program. Several modules help the users of the method to treat the data collected during a diagnosis survey, to set up refurbishment scenario and calculate their cost or energy performance, and finally to visualize the results in a comprehensive way and to prepare quality reports. This article presents the structure and the main features of the software. (au)

  8. Software quality assurance plans for safety-critical software

    International Nuclear Information System (INIS)

    Liddle, P.

    2006-01-01

    Application software is defined as safety-critical if a fault in the software could prevent the system components from performing their nuclear-safety functions. Therefore, for nuclear-safety systems, the AREVA TELEPERM R XS (TXS) system is classified 1E, as defined in the Inst. of Electrical and Electronics Engineers (IEEE) Std 603-1998. The application software is classified as Software Integrity Level (SIL)-4, as defined in IEEE Std 7-4.3.2-2003. The AREVA NP Inc. Software Program Manual (SPM) describes the measures taken to ensure that the TELEPERM XS application software attains a level of quality commensurate with its importance to safety. The manual also describes how TELEPERM XS correctly performs the required safety functions and conforms to established technical and documentation requirements, conventions, rules, and standards. The program manual covers the requirements definition, detailed design, integration, and test phases for the TELEPERM XS application software, and supporting software created by AREVA NP Inc. The SPM is required for all safety-related TELEPERM XS system applications. The program comprises several basic plans and practices: 1. A Software Quality-Assurance Plan (SQAP) that describes the processes necessary to ensure that the software attains a level of quality commensurate with its importance to safety function. 2. A Software Safety Plan (SSP) that identifies the process to reasonably ensure that safety-critical software performs as intended during all abnormal conditions and events, and does not introduce any new hazards that could jeopardize the health and safety of the public. 3. A Software Verification and Validation (V and V) Plan that describes the method of ensuring the software is in accordance with the requirements. 4. A Software Configuration Management Plan (SCMP) that describes the method of maintaining the software in an identifiable state at all times. 5. A Software Operations and Maintenance Plan (SO and MP) that

  9. Software preservation

    Directory of Open Access Journals (Sweden)

    Tadej Vodopivec

    2011-01-01

    Full Text Available Comtrade Ltd. covers a wide range of activities related to information and communication technologies; its deliverables include web applications, locally installed programs,system software, drivers, embedded software (used e.g. in medical devices, auto parts,communication switchboards. Also the extensive knowledge and practical experience about digital long-term preservation technologies have been acquired. This wide spectrum of activities puts us in the position to discuss the often overlooked aspect of the digital preservation - preservation of software programs. There are many resources dedicated to digital preservation of digital data, documents and multimedia records,but not so many about how to preserve the functionalities and features of computer programs. Exactly these functionalities - dynamic response to inputs - render the computer programs rich compared to documents or linear multimedia. The article opens the questions on the beginning of the way to the permanent digital preservation. The purpose is to find a way in the right direction, where all relevant aspects will be covered in proper balance. The following questions are asked: why at all to preserve computer programs permanently, who should do this and for whom, when we should think about permanent program preservation, what should be persevered (such as source code, screenshots, documentation, and social context of the program - e.g. media response to it ..., where and how? To illustrate the theoretic concepts given the idea of virtual national museum of electronic banking is also presented.

  10. Verification of safety critical software

    International Nuclear Information System (INIS)

    Son, Ki Chang; Chun, Chong Son; Lee, Byeong Joo; Lee, Soon Sung; Lee, Byung Chai

    1996-01-01

    To assure quality of safety critical software, software should be developed in accordance with software development procedures and rigorous software verification and validation should be performed. Software verification is the formal act of reviewing, testing of checking, and documenting whether software components comply with the specified requirements for a particular stage of the development phase[1]. New software verification methodology was developed and was applied to the Shutdown System No. 1 and 2 (SDS1,2) for Wolsung 2,3 and 4 nuclear power plants by Korea Atomic Energy Research Institute(KAERI) and Atomic Energy of Canada Limited(AECL) in order to satisfy new regulation requirements of Atomic Energy Control Boars(AECB). Software verification methodology applied to SDS1 for Wolsung 2,3 and 4 project will be described in this paper. Some errors were found by this methodology during the software development for SDS1 and were corrected by software designer. Outputs from Wolsung 2,3 and 4 project have demonstrated that the use of this methodology results in a high quality, cost-effective product. 15 refs., 6 figs. (author)

  11. Establishing software quality assurance

    International Nuclear Information System (INIS)

    Malsbury, J.

    1983-01-01

    This paper is concerned with four questions about establishing software QA: What is software QA. Why have software QA. What is the role of software QA. What is necessary to ensure the success of software QA

  12. Distribution and communication in software engineering environments. Application to the HELIOS Software Bus.

    OpenAIRE

    Jean, F. C.; Jaulent, M. C.; Coignard, J.; Degoulet, P.

    1991-01-01

    Modularity, distribution and integration are current trends in Software Engineering. To reach these goals HELIOS, a distributive Software Engineering Environment dedicated to the medical field, has been conceived and a prototype implemented. This environment is made by the collaboration of several, well encapsulated Software Components. This paper presents the architecture retained to allow communication between the different components and focus on the implementation details of the Software ...

  13. Effective Software Engineering Leadership for Development Programs

    Science.gov (United States)

    Cagle West, Marsha

    2010-01-01

    Software is a critical component of systems ranging from simple consumer appliances to complex health, nuclear, and flight control systems. The development of quality, reliable, and effective software solutions requires the incorporation of effective software engineering processes and leadership. Processes, approaches, and methodologies for…

  14. Physics Validation of the LHC Software

    CERN Multimedia

    CERN. Geneva

    2004-01-01

    The LHC Software will be confronted to unprecedented challenges as soon as the LHC will turn on. We summarize the main Software requirements coming from the LHC detectors, triggers and physics, and we discuss several examples of Software components developed by the experiments and the LCG project (simulation, reconstruction, etc.), their validation, and their adequacy for LHC physics.

  15. The Evolution of Software Publication in Astronomy

    Science.gov (United States)

    Cantiello, Matteo

    2018-01-01

    Software is a fundamental component of the scientific research process. As astronomical discoveries increasingly rely on complex numerical calculations and the analysis of big data sets, publishing and documenting software is a fundamental step in ensuring transparency and reproducibility of results. I will briefly discuss the recent history of software publication and highlight the challenges and opportunities ahead.

  16. Software quality metrics aggregation in industry

    NARCIS (Netherlands)

    Mordal, K.; Anquetil, N.; Laval, J.; Serebrenik, A.; Vasilescu, B.N.; Ducasse, S.

    2013-01-01

    With the growing need for quality assessment of entire software systems in the industry, new issues are emerging. First, because most software quality metrics are defined at the level of individual software components, there is a need for aggregation methods to summarize the results at the system

  17. Pybus - A Python Software Bus

    International Nuclear Information System (INIS)

    Lavrijsen, Wim T.L.P.

    2004-01-01

    A software bus, just like its hardware equivalent, allows for the discovery, installation, configuration, loading, unloading, and run-time replacement of software components, as well as channeling of inter-component communication. Python, a popular open-source programming language, encourages a modular design on software written in it, but it offers little or no component functionality. However, the language and its interpreter provide sufficient hooks to implement a thin, integral layer of component support. This functionality can be presented to the developer in the form of a module, making it very easy to use. This paper describes a Pythonmodule, PyBus, with which the concept of a ''software bus'' can be realized in Python. It demonstrates, within the context of the ATLAS software framework Athena, how PyBus can be used for the installation and (run-time) configuration of software, not necessarily Python modules, from a Python application in a way that is transparent to the end-user

  18. Software Prototyping

    Science.gov (United States)

    Del Fiol, Guilherme; Hanseler, Haley; Crouch, Barbara Insley; Cummins, Mollie R.

    2016-01-01

    Summary Background Health information exchange (HIE) between Poison Control Centers (PCCs) and Emergency Departments (EDs) could improve care of poisoned patients. However, PCC information systems are not designed to facilitate HIE with EDs; therefore, we are developing specialized software to support HIE within the normal workflow of the PCC using user-centered design and rapid prototyping. Objective To describe the design of an HIE dashboard and the refinement of user requirements through rapid prototyping. Methods Using previously elicited user requirements, we designed low-fidelity sketches of designs on paper with iterative refinement. Next, we designed an interactive high-fidelity prototype and conducted scenario-based usability tests with end users. Users were asked to think aloud while accomplishing tasks related to a case vignette. After testing, the users provided feedback and evaluated the prototype using the System Usability Scale (SUS). Results Survey results from three users provided useful feedback that was then incorporated into the design. After achieving a stable design, we used the prototype itself as the specification for development of the actual software. Benefits of prototyping included having 1) subject-matter experts heavily involved with the design; 2) flexibility to make rapid changes, 3) the ability to minimize software development efforts early in the design stage; 4) rapid finalization of requirements; 5) early visualization of designs; 6) and a powerful vehicle for communication of the design to the programmers. Challenges included 1) time and effort to develop the prototypes and case scenarios; 2) no simulation of system performance; 3) not having all proposed functionality available in the final product; and 4) missing needed data elements in the PCC information system. PMID:27081404

  19. Global Software Engineering: A Software Process Approach

    Science.gov (United States)

    Richardson, Ita; Casey, Valentine; Burton, John; McCaffery, Fergal

    Our research has shown that many companies are struggling with the successful implementation of global software engineering, due to temporal, cultural and geographical distance, which causes a range of factors to come into play. For example, cultural, project managementproject management and communication difficulties continually cause problems for software engineers and project managers. While the implementation of efficient software processes can be used to improve the quality of the software product, published software process models do not cater explicitly for the recent growth in global software engineering. Our thesis is that global software engineering factors should be included in software process models to ensure their continued usefulness in global organisations. Based on extensive global software engineering research, we have developed a software process, Global Teaming, which includes specific practices and sub-practices. The purpose is to ensure that requirements for successful global software engineering are stipulated so that organisations can ensure successful implementation of global software engineering.

  20. Terra Harvest software architecture

    Science.gov (United States)

    Humeniuk, Dave; Klawon, Kevin

    2012-06-01

    Under the Terra Harvest Program, the DIA has the objective of developing a universal Controller for the Unattended Ground Sensor (UGS) community. The mission is to define, implement, and thoroughly document an open architecture that universally supports UGS missions, integrating disparate systems, peripherals, etc. The Controller's inherent interoperability with numerous systems enables the integration of both legacy and future UGS System (UGSS) components, while the design's open architecture supports rapid third-party development to ensure operational readiness. The successful accomplishment of these objectives by the program's Phase 3b contractors is demonstrated via integration of the companies' respective plug-'n'-play contributions that include controllers, various peripherals, such as sensors, cameras, etc., and their associated software drivers. In order to independently validate the Terra Harvest architecture, L-3 Nova Engineering, along with its partner, the University of Dayton Research Institute, is developing the Terra Harvest Open Source Environment (THOSE), a Java Virtual Machine (JVM) running on an embedded Linux Operating System. The Use Cases on which the software is developed support the full range of UGS operational scenarios such as remote sensor triggering, image capture, and data exfiltration. The Team is additionally developing an ARM microprocessor-based evaluation platform that is both energy-efficient and operationally flexible. The paper describes the overall THOSE architecture, as well as the design decisions for some of the key software components. Development process for THOSE is discussed as well.

  1. Web components and the semantic web

    OpenAIRE

    Casey, Maire; Pahl, Claus

    2003-01-01

    Component-based software engineering on the Web differs from traditional component and software engineering. We investigate Web component engineering activites that are crucial for the development,com position, and deployment of components on the Web. The current Web Services and Semantic Web initiatives strongly influence our work. Focussing on Web component composition we develop description and reasoning techniques that support a component developer in the composition activities,fo cussing...

  2. Software system safety

    Science.gov (United States)

    Uber, James G.

    1988-01-01

    Software itself is not hazardous, but since software and hardware share common interfaces there is an opportunity for software to create hazards. Further, these software systems are complex, and proven methods for the design, analysis, and measurement of software safety are not yet available. Some past software failures, future NASA software trends, software engineering methods, and tools and techniques for various software safety analyses are reviewed. Recommendations to NASA are made based on this review.

  3. Software-based acoustical measurements

    CERN Document Server

    Miyara, Federico

    2017-01-01

    This textbook provides a detailed introduction to the use of software in combination with simple and economical hardware (a sound level meter with calibrated AC output and a digital recording system) to obtain sophisticated measurements usually requiring expensive equipment. It emphasizes the use of free, open source, and multiplatform software. Many commercial acoustical measurement systems use software algorithms as an integral component; however the methods are not disclosed. This book enables the reader to develop useful algorithms and provides insight into the use of digital audio editing tools to document features in the signal. Topics covered include acoustical measurement principles, in-depth critical study of uncertainty applied to acoustical measurements, digital signal processing from the basics, and metrologically-oriented spectral and statistical analysis of signals. The student will gain a deep understanding of the use of software for measurement purposes; the ability to implement software-based...

  4. Software Configurable Multichannel Transceiver

    Science.gov (United States)

    Freudinger, Lawrence C.; Cornelius, Harold; Hickling, Ron; Brooks, Walter

    2009-01-01

    Emerging test instrumentation and test scenarios increasingly require network communication to manage complexity. Adapting wireless communication infrastructure to accommodate challenging testing needs can benefit from reconfigurable radio technology. A fundamental requirement for a software-definable radio system is independence from carrier frequencies, one of the radio components that to date has seen only limited progress toward programmability. This paper overviews an ongoing project to validate the viability of a promising chipset that performs conversion of radio frequency (RF) signals directly into digital data for the wireless receiver and, for the transmitter, converts digital data into RF signals. The Software Configurable Multichannel Transceiver (SCMT) enables four transmitters and four receivers in a single unit the size of a commodity disk drive, programmable for any frequency band between 1 MHz and 6 GHz.

  5. Component-based development process and component lifecycle

    NARCIS (Netherlands)

    Crnkovic, I.; Chaudron, M.R.V.; Larsson, S.

    2006-01-01

    The process of component- and component-based system development differs in many significant ways from the "classical" development process of software systems. The main difference is in the separation of the development process of components from the development process of systems. This fact has a

  6. Effective Results Analysis for the Similar Software Products’ Orthogonality

    Directory of Open Access Journals (Sweden)

    Ion Ivan

    2009-10-01

    Full Text Available It is defined the concept of similar software. There are established conditions of archiving the software components. It is carried out the orthogonality evaluation and the correlation between the orthogonality and the complexity of the homogenous software components is analyzed. Shall proceed to build groups of similar software products, belonging to the orthogonality intervals. There are presented in graphical form the results of the analysis. There are detailed aspects of the functioning of the software product allocated for the orthogonality.

  7. Hirabayashi, Satoshi; Kroll, Charles N.; Nowak, David J. 2011. Component-based development and sensitivity analyses of an air pollutant dry deposition model. Environmental Modelling & Software. 26(6): 804-816.

    Science.gov (United States)

    Satoshi Hirabayashi; Chuck Kroll; David Nowak

    2011-01-01

    The Urban Forest Effects-Deposition model (UFORE-D) was developed with a component-based modeling approach. Functions of the model were separated into components that are responsible for user interface, data input/output, and core model functions. Taking advantage of the component-based approach, three UFORE-D applications were developed: a base application to estimate...

  8. Software Quality Assurance for Nuclear Safety Systems

    International Nuclear Information System (INIS)

    Sparkman, D R; Lagdon, R

    2004-01-01

    The US Department of Energy has undertaken an initiative to improve the quality of software used to design and operate their nuclear facilities across the United States. One aspect of this initiative is to revise or create new directives and guides associated with quality practices for the safety software in its nuclear facilities. Safety software includes the safety structures, systems, and components software and firmware, support software and design and analysis software used to ensure the safety of the facility. DOE nuclear facilities are unique when compared to commercial nuclear or other industrial activities in terms of the types and quantities of hazards that must be controlled to protect workers, public and the environment. Because of these differences, DOE must develop an approach to software quality assurance that ensures appropriate risk mitigation by developing a framework of requirements that accomplishes the following goals: (sm b ullet) Ensures the software processes developed to address nuclear safety in design, operation, construction and maintenance of its facilities are safe (sm b ullet) Considers the larger system that uses the software and its impacts (sm b ullet) Ensures that the software failures do not create unsafe conditions Software designers for nuclear systems and processes must reduce risks in software applications by incorporating processes that recognize, detect, and mitigate software failure in safety related systems. It must also ensure that fail safe modes and component testing are incorporated into software design. For nuclear facilities, the consideration of risk is not necessarily sufficient to ensure safety. Systematic evaluation, independent verification and system safety analysis must be considered for software design, implementation, and operation. The software industry primarily uses risk analysis to determine the appropriate level of rigor applied to software practices. This risk-based approach distinguishes safety

  9. Software Reuse Within the Earth Science Community

    Science.gov (United States)

    Marshall, James J.; Olding, Steve; Wolfe, Robert E.; Delnore, Victor E.

    2006-01-01

    Scientific missions in the Earth sciences frequently require cost-effective, highly reliable, and easy-to-use software, which can be a challenge for software developers to provide. The NASA Earth Science Enterprise (ESE) spends a significant amount of resources developing software components and other software development artifacts that may also be of value if reused in other projects requiring similar functionality. In general, software reuse is often defined as utilizing existing software artifacts. Software reuse can improve productivity and quality while decreasing the cost of software development, as documented by case studies in the literature. Since large software systems are often the results of the integration of many smaller and sometimes reusable components, ensuring reusability of such software components becomes a necessity. Indeed, designing software components with reusability as a requirement can increase the software reuse potential within a community such as the NASA ESE community. The NASA Earth Science Data Systems (ESDS) Software Reuse Working Group is chartered to oversee the development of a process that will maximize the reuse potential of existing software components while recommending strategies for maximizing the reusability potential of yet-to-be-designed components. As part of this work, two surveys of the Earth science community were conducted. The first was performed in 2004 and distributed among government employees and contractors. A follow-up survey was performed in 2005 and distributed among a wider community, to include members of industry and academia. The surveys were designed to collect information on subjects such as the current software reuse practices of Earth science software developers, why they choose to reuse software, and what perceived barriers prevent them from reusing software. In this paper, we compare the results of these surveys, summarize the observed trends, and discuss the findings. The results are very

  10. Sandia software guidelines: Software quality planning

    Energy Technology Data Exchange (ETDEWEB)

    1987-08-01

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standard for Software Quality Assurance Plans, this volume identifies procedures to follow in producing a Software Quality Assurance Plan for an organization or a project, and provides an example project SQA plan. 2 figs., 4 tabs.

  11. Dependability Analysis Methods For Configurable Software

    International Nuclear Information System (INIS)

    Dahll, Gustav; Pulkkinen, Urho

    1996-01-01

    Configurable software systems are systems which are built up by standard software components in the same way as a hardware system is built up by standard hardware components. Such systems are often used in the control of NPPs, also in safety related applications. A reliability analysis of such systems is therefore necessary. This report discusses what configurable software is, and what is particular with respect to reliability assessment of such software. Two very commonly used techniques in traditional reliability analysis, viz. failure mode, effect and criticality analysis (FMECA) and fault tree analysis are investigated. A real example is used to illustrate the discussed methods. Various aspects relevant to the assessment of the software reliability in such systems are discussed. Finally some models for quantitative software reliability assessment applicable on configurable software systems are described. (author)

  12. Avoidable Software Procurements

    Science.gov (United States)

    2012-09-01

    software license, software usage, ELA, Software as a Service , SaaS , Software Asset...PaaS Platform as a Service SaaS Software as a Service SAM Software Asset Management SMS System Management Server SEWP Solutions for Enterprise Wide...delivery of full Cloud Services , we will see the transition of the Cloud Computing service model from Iaas to SaaS , or Software as a Service . Software

  13. Validating Timed Component Contracts

    DEFF Research Database (Denmark)

    Le Guilly, Thibaut; Liu, Shaoying; Olsen, Petur

    2015-01-01

    This paper presents a technique for testing software components with contracts that specify functional behavior, synchronization, as well as timing behavior. The approach combines elements from unit testing with model-based testing techniques for timed automata. The technique is implemented...... in an online testing tool, and we demonstrate its use on a concrete use case....

  14. Software engineering architecture-driven software development

    CERN Document Server

    Schmidt, Richard F

    2013-01-01

    Software Engineering: Architecture-driven Software Development is the first comprehensive guide to the underlying skills embodied in the IEEE's Software Engineering Body of Knowledge (SWEBOK) standard. Standards expert Richard Schmidt explains the traditional software engineering practices recognized for developing projects for government or corporate systems. Software engineering education often lacks standardization, with many institutions focusing on implementation rather than design as it impacts product architecture. Many graduates join the workforce with incomplete skil

  15. The software life cycle

    CERN Document Server

    Ince, Darrel

    1990-01-01

    The Software Life Cycle deals with the software lifecycle, that is, what exactly happens when software is developed. Topics covered include aspects of software engineering, structured techniques of software development, and software project management. The use of mathematics to design and develop computer systems is also discussed. This book is comprised of 20 chapters divided into four sections and begins with an overview of software engineering and software development, paying particular attention to the birth of software engineering and the introduction of formal methods of software develop

  16. Software Maintenance and Evolution: The Implication for Software ...

    African Journals Online (AJOL)

    PROF. O. E. OSUAGWU

    2013-06-01

    Jun 1, 2013 ... component of software development process. [25]. It is the ... technologies and stand the test of time. 2.0 Background of ..... costing and time span, and optimization of resource allocation have made long term estimation of ...

  17. Understanding software faults and their role in software reliability modeling

    Science.gov (United States)

    Munson, John C.

    1994-01-01

    regression equation. Since most of the existing metrics have common elements and are linear combinations of these common elements, it seems reasonable to investigate the structure of the underlying common factors or components that make up the raw metrics. The technique we have chosen to use to explore this structure is a procedure called principal components analysis. Principal components analysis is a decomposition technique that may be used to detect and analyze collinearity in software metrics. When confronted with a large number of metrics measuring a single construct, it may be desirable to represent the set by some smaller number of variables that convey all, or most, of the information in the original set. Principal components are linear transformations of a set of random variables that summarize the information contained in the variables. The transformations are chosen so that the first component accounts for the maximal amount of variation of the measures of any possible linear transform; the second component accounts for the maximal amount of residual variation; and so on. The principal components are constructed so that they represent transformed scores on dimensions that are orthogonal. Through the use of principal components analysis, it is possible to have a set of highly related software attributes mapped into a small number of uncorrelated attribute domains. This definitively solves the problem of multi-collinearity in subsequent regression analysis. There are many software metrics in the literature, but principal component analysis reveals that there are few distinct sources of variation, i.e. dimensions, in this set of metrics. It would appear perfectly reasonable to characterize the measurable attributes of a program with a simple function of a small number of orthogonal metrics each of which represents a distinct software attribute domain.

  18. Models for composing software : an analysis of software composition and objects

    NARCIS (Netherlands)

    Bergmans, Lodewijk

    1999-01-01

    In this report, we investigate component-based software construction with a focus on composition. In particular we try to analyze the requirements and issues for components and software composition. As a means to understand this research area, we introduce a canonical model for representing

  19. First International Workshop on Variability in Software Architecture (VARSA 2011)

    NARCIS (Netherlands)

    Galster, Matthias; Avgeriou, Paris; Weyns, Danny; Mannisto, Tomi

    2011-01-01

    Variability is the ability of a software artifact to be changed for a specific context. Mechanisms to accommodate variability include software product lines, configuration wizards and tools in commercial software, configuration interfaces of software components, or the dynamic runtime composition of

  20. A Multi-mission Event-Driven Component-Based System for Support of Flight Software Development, ATLO, and Operations first used by the Mars Science Laboratory (MSL) Project

    Science.gov (United States)

    Dehghani, Navid; Tankenson, Michael

    2006-01-01

    This viewgraph presentation reviews the architectural description of the Mission Data Processing and Control System (MPCS). MPCS is an event-driven, multi-mission ground data processing components providing uplink, downlink, and data management capabilities which will support the Mars Science Laboratory (MSL) project as its first target mission. MPCS is designed with these factors (1) Enabling plug and play architecture (2) MPCS has strong inheritance from GDS components that have been developed for other Flight Projects (MER, MRO, DAWN, MSAP), and are currently being used in operations and ATLO, and (3) MPCS components are Java-based, platform independent, and are designed to consume and produce XML-formatted data

  1. A Multi-mission Event-Driven Component-Based System for Support of Flight Software Development, ATLO, and Operations first used by the Mars Science Laboratory (MSL) Project

    Science.gov (United States)

    Dehghani, Navid; Tankenson, Michael

    2006-01-01

    This paper details an architectural description of the Mission Data Processing and Control System (MPCS), an event-driven, multi-mission ground data processing components providing uplink, downlink, and data management capabilities which will support the Mars Science Laboratory (MSL) project as its first target mission. MPCS is developed based on a set of small reusable components, implemented in Java, each designed with a specific function and well-defined interfaces. An industry standard messaging bus is used to transfer information among system components. Components generate standard messages which are used to capture system information, as well as triggers to support the event-driven architecture of the system. Event-driven systems are highly desirable for processing high-rate telemetry (science and engineering) data, and for supporting automation for many mission operations processes.

  2. ESTSC - Software Best Practices

    Science.gov (United States)

    DOE Scientific and Technical Software Best Practices December 2010 Table of Contents 1.0 Introduction 2.0 Responsibilities 2.1 OSTI/ESTSC 2.2 SIACs 2.3 Software Submitting Sites/Creators 2.4 Software Sensitivity Review 3.0 Software Announcement and Submission 3.1 STI Software Appropriate for Announcement 3.2

  3. Software Assurance Competency Model

    Science.gov (United States)

    2013-03-01

    COTS) software , and software as a service ( SaaS ). L2: Define and analyze risks in the acquisition of contracted software , COTS software , and SaaS ...2010a]: Application of technologies and processes to achieve a required level of confidence that software systems and services function in the...

  4. A Software Development Platform for Mechatronic Systems

    DEFF Research Database (Denmark)

    Guan, Wei

    Software has become increasingly determinative for development of mechatronic systems, which underscores the importance of demands for shortened time-to-market, increased productivity, higher quality, and improved dependability. As the complexity of systems is dramatically increasing, these demands...... present a challenge to the practitioners who adopt conventional software development approach. An effective approach towards industrial production of software for mechatronic systems is needed. This approach requires a disciplined engineering process that encompasses model-driven engineering and component......-based software engineering, whereby we enable incremental software development using component models to address the essential design issues of real-time embedded systems. To this end, this dissertation presents a software development platform that provides an incremental model-driven development process based...

  5. Software attribute visualization for high integrity software

    Energy Technology Data Exchange (ETDEWEB)

    Pollock, G.M.

    1998-03-01

    This report documents a prototype tool developed to investigate the use of visualization and virtual reality technologies for improving software surety confidence. The tool is utilized within the execution phase of the software life cycle. It provides a capability to monitor an executing program against prespecified requirements constraints provided in a program written in the requirements specification language SAGE. The resulting Software Attribute Visual Analysis Tool (SAVAnT) also provides a technique to assess the completeness of a software specification.

  6. The Use of Utility Accounting Software at Miami University.

    Science.gov (United States)

    Wenner, Paul

    1999-01-01

    Describes how Miami University successfully developed an accounting software package that tracked and recorded their utility usage, including examples of its graphics and reporting components. Background information examining the decision to pursue an energy management software package is included. (GR)

  7. Software reliability prediction using SPN | Abbasabadee | Journal of ...

    African Journals Online (AJOL)

    Software reliability prediction using SPN. ... In this research for computation of software reliability, component reliability model based on SPN would be proposed. An isomorphic markov ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  8. NASA Software Engineering Benchmarking Study

    Science.gov (United States)

    Rarick, Heather L.; Godfrey, Sara H.; Kelly, John C.; Crumbley, Robert T.; Wifl, Joel M.

    2013-01-01

    To identify best practices for the improvement of software engineering on projects, NASA's Offices of Chief Engineer (OCE) and Safety and Mission Assurance (OSMA) formed a team led by Heather Rarick and Sally Godfrey to conduct this benchmarking study. The primary goals of the study are to identify best practices that: Improve the management and technical development of software intensive systems; Have a track record of successful deployment by aerospace industries, universities [including research and development (R&D) laboratories], and defense services, as well as NASA's own component Centers; and Identify candidate solutions for NASA's software issues. Beginning in the late fall of 2010, focus topics were chosen and interview questions were developed, based on the NASA top software challenges. Between February 2011 and November 2011, the Benchmark Team interviewed a total of 18 organizations, consisting of five NASA Centers, five industry organizations, four defense services organizations, and four university or university R and D laboratory organizations. A software assurance representative also participated in each of the interviews to focus on assurance and software safety best practices. Interviewees provided a wealth of information on each topic area that included: software policy, software acquisition, software assurance, testing, training, maintaining rigor in small projects, metrics, and use of the Capability Maturity Model Integration (CMMI) framework, as well as a number of special topics that came up in the discussions. NASA's software engineering practices compared favorably with the external organizations in most benchmark areas, but in every topic, there were ways in which NASA could improve its practices. Compared to defense services organizations and some of the industry organizations, one of NASA's notable weaknesses involved communication with contractors regarding its policies and requirements for acquired software. One of NASA's strengths

  9. Reliability of software

    International Nuclear Information System (INIS)

    Kopetz, H.

    1980-01-01

    Common factors and differences in the reliability of hardware and software; reliability increase by means of methods of software redundancy. Maintenance of software for long term operating behavior. (HP) [de

  10. Space Flight Software Development Software for Intelligent System Health Management

    Science.gov (United States)

    Trevino, Luis C.; Crumbley, Tim

    2004-01-01

    The slide presentation examines the Marshall Space Flight Center Flight Software Branch, including software development projects, mission critical space flight software development, software technical insight, advanced software development technologies, and continuous improvement in the software development processes and methods.

  11. Why Free Software Matters for Literacy Educators.

    Science.gov (United States)

    Brunelle, Michael D.; Bruce, Bertram C.

    2002-01-01

    Notes that understanding what "free software" means and its implications for access and use of new technologies is an important component of the new literacies. Concludes that if free speech and free press are essential to the development of a general literacy, then free software can promote the development of computer literacy. (SG)

  12. Automating Software Development Process using Fuzzy Logic

    NARCIS (Netherlands)

    Marcelloni, Francesco; Aksit, Mehmet; Damiani, Ernesto; Jain, Lakhmi C.; Madravio, Mauro

    2004-01-01

    In this chapter, we aim to highlight how fuzzy logic can be a valid expressive tool to manage the software development process. We characterize a software development method in terms of two major components: artifact types and methodological rules. Classes, attributes, operations, and inheritance

  13. Software Engineering Guidebook

    Science.gov (United States)

    Connell, John; Wenneson, Greg

    1993-01-01

    The Software Engineering Guidebook describes SEPG (Software Engineering Process Group) supported processes and techniques for engineering quality software in NASA environments. Three process models are supported: structured, object-oriented, and evolutionary rapid-prototyping. The guidebook covers software life-cycles, engineering, assurance, and configuration management. The guidebook is written for managers and engineers who manage, develop, enhance, and/or maintain software under the Computer Software Services Contract.

  14. Effective Results Analysis for the Similar Software Products’ Orthogonality

    OpenAIRE

    Ion Ivan; Daniel Milodin

    2009-01-01

    It is defined the concept of similar software. There are established conditions of archiving the software components. It is carried out the orthogonality evaluation and the correlation between the orthogonality and the complexity of the homogenous software components is analyzed. Shall proceed to build groups of similar software products, belonging to the orthogonality intervals. There are presented in graphical form the results of the analysis. There are detailed aspects of the functioning o...

  15. Teaching Software Componentization: A Bar Chart Java Bean

    Science.gov (United States)

    Mitri, Michel

    2010-01-01

    In the current object-oriented paradigm, software construction increasingly involves creating and utilizing "software components". These components can serve a variety of functions, from common algorithmic processes to database connectivity to graphical interfaces. The advantage of component architectures is that programmers can use pre-existing…

  16. Robotic Software Integration Using MARIE

    Directory of Open Access Journals (Sweden)

    Carle Côté

    2006-03-01

    Full Text Available This paper presents MARIE, a middleware framework oriented towards developing and integrating new and existing software for robotic systems. By using a generic communication framework, MARIE aims to create a flexible distributed component system that allows robotics developers to share software programs and algorithms, and design prototypes rapidly based on their own integration needs. The use of MARIE is illustrated with the design of a socially interactive autonomous mobile robot platform capable of map building, localization, navigation, tasks scheduling, sound source localization, tracking and separation, speech recognition and generation, visual tracking, message reading and graphical interaction using a touch screen interface.

  17. GENII Version 2 Software Design Document

    Energy Technology Data Exchange (ETDEWEB)

    Napier, Bruce A.; Strenge, Dennis L.; Ramsdell, James V.; Eslinger, Paul W.; Fosmire, Christian J.

    2004-03-08

    This document describes the architectural design for the GENII-V2 software package. This document defines details of the overall structure of the software, the major software components, their data file interfaces, and specific mathematical models to be used. The design represents a translation of the requirements into a description of the software structure, software components, interfaces, and necessary data. The design focuses on the major components and data communication links that are key to the implementation of the software within the operating framework. The purpose of the GENII-V2 software package is to provide the capability to perform dose and risk assessments of environmental releases of radionuclides. The software also has the capability of calculating environmental accumulation and radiation doses from surface water, groundwater, and soil (buried waste) media when an input concentration of radionuclide in these media is provided. This report represents a detailed description of the capabilities of the software product with exact specifications of mathematical models that form the basis for the software implementation and testing efforts. This report also presents a detailed description of the overall structure of the software package, details of main components (implemented in the current phase of work), details of data communication files, and content of basic output reports. The GENII system includes the capabilities for calculating radiation doses following chronic and acute releases. Radionuclide transport via air, water, or biological activity may be considered. Air transport options include both puff and plume models, each allow use of an effective stack height or calculation of plume rise from buoyant or momentum effects (or both). Building wake effects can be included in acute atmospheric release scenarios. The code provides risk estimates for health effects to individuals or populations; these can be obtained using the code by applying

  18. Other components

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    This chapter includes descriptions of electronic and mechanical components which do not merit a chapter to themselves. Other hardware requires mention because of particularly high tolerance or intolerance of exposure to radiation. A more systematic analysis of radiation responses of structures which are definable by material was given in section 3.8. The components discussed here are field effect transistors, transducers, temperature sensors, magnetic components, superconductors, mechanical sensors, and miscellaneous electronic components

  19. The artifacts of component-based development

    International Nuclear Information System (INIS)

    Rizwan, M.; Qureshi, J.; Hayat, S.A.

    2007-01-01

    Component based development idea was floated in a conference name Mass Produced Software Components in 1968 (1). Since then engineering and scientific libraries are developed to reuse the previously developed functions. This concept is now widely used in SW development as component based development (CBD). Component-based software engineering (CBSE) is used to develop/ assemble software from existing components (2). Software developed using components is called component where (3). This paper presents different architectures of CBD such as Active X, common object request broker architecture (CORBA), remote method invocation (RMI) and simple object access protocol (SOAP). The overall objective of this paper is to support the practice of CBD by comparing its advantages and disadvantages. This paper also evaluates object oriented process model to adapt it for CBD. (author)

  20. Ensuring Software IP Cleanliness

    Directory of Open Access Journals (Sweden)

    Mahshad Koohgoli

    2007-12-01

    Full Text Available At many points in the life of a software enterprise, determination of intellectual property (IP cleanliness becomes critical. The value of an enterprise that develops and sells software may depend on how clean the software is from the IP perspective. This article examines various methods of ensuring software IP cleanliness and discusses some of the benefits and shortcomings of current solutions.

  1. Commercial Literacy Software.

    Science.gov (United States)

    Balajthy, Ernest

    1997-01-01

    Presents the first year's results of a continuing project to monitor the availability of software of relevance for literacy education purposes. Concludes there is an enormous amount of software available for use by teachers of reading and literacy--whereas drill-and-practice software is the largest category of software available, large numbers of…

  2. Ensuring Software IP Cleanliness

    OpenAIRE

    Mahshad Koohgoli; Richard Mayer

    2007-01-01

    At many points in the life of a software enterprise, determination of intellectual property (IP) cleanliness becomes critical. The value of an enterprise that develops and sells software may depend on how clean the software is from the IP perspective. This article examines various methods of ensuring software IP cleanliness and discusses some of the benefits and shortcomings of current solutions.

  3. Statistical Software Engineering

    Science.gov (United States)

    1998-04-13

    multiversion software subject to coincident errors. IEEE Trans. Software Eng. SE-11:1511-1517. Eckhardt, D.E., A.K Caglayan, J.C. Knight, L.D. Lee, D.F...J.C. and N.G. Leveson. 1986. Experimental evaluation of the assumption of independence in multiversion software. IEEE Trans. Software

  4. Agile Software Development

    Science.gov (United States)

    Biju, Soly Mathew

    2008-01-01

    Many software development firms are now adopting the agile software development method. This method involves the customer at every level of software development, thus reducing the impact of change in the requirement at a later stage. In this article, the principles of the agile method for software development are explored and there is a focus on…

  5. Improving Software Developer's Competence

    DEFF Research Database (Denmark)

    Abrahamsson, Pekka; Kautz, Karlheinz; Sieppi, Heikki

    2002-01-01

    Emerging agile software development methods are people oriented development approaches to be used by the software industry. The personal software process (PSP) is an accepted method for improving the capabilities of a single software engineer. Five original hypotheses regarding the impact...

  6. Software - Naval Oceanography Portal

    Science.gov (United States)

    are here: Home › USNO › Earth Orientation › Software USNO Logo USNO Navigation Earth Orientation Products GPS-based Products VLBI-based Products EO Information Center Publications about Products Software Search databases Auxiliary Software Supporting Software Form Folder Earth Orientation Matrix Calculator

  7. Software Engineering Education Directory

    Science.gov (United States)

    1990-04-01

    and Engineering (CMSC 735) Codes: GPEV2 * Textiooks: IEEE Tutoria on Models and Metrics for Software Management and Engameeing by Basi, Victor R...Software Engineering (Comp 227) Codes: GPRY5 Textbooks: IEEE Tutoria on Software Design Techniques by Freeman, Peter and Wasserman, Anthony 1. Software

  8. Model-driven software migration a methodology

    CERN Document Server

    Wagner, Christian

    2014-01-01

    Today, reliable software systems are the basis of any business or company. The continuous further development of those systems is the central component in software evolution. It requires a huge amount of time- man power- as well as financial resources. The challenges are size, seniority and heterogeneity of those software systems. Christian Wagner addresses software evolution: the inherent problems and uncertainties in the process. He presents a model-driven method which leads to a synchronization between source code and design. As a result the model layer will be the central part in further e

  9. Development of a fatigue analysis software system

    International Nuclear Information System (INIS)

    Choi, B. I.; Lee, H. J.; Han, S. W.; Kim, J. Y.; Hwang, K. H.; Kang, J. Y.

    2001-01-01

    A general purpose fatigue analysis software to predict fatigue lives of mechanical components and structures was developed. This software has some characteristic features including functions of searching weak regions on the free surface in order to reduce computing time significantly, a database of fatigue properties for various materials, and an expert system which can assist any users to get more proper results. This software can be used in the environment consists of commercial finite element packages. Using the software developed fatigue analyses for a SAE keyhole specimen and an automobile knuckle were carried out. It was observed that the results were agree well with those from commercial packages

  10. A development methodology for scientific software

    International Nuclear Information System (INIS)

    Cort, G.; Barrus, D.M.; Goldstone, J.A.; Miller, L.; Nelson, R.O.; Poore, R.V.

    1985-01-01

    We present the details of a software development methodology that addresses all phases of the software life cycle, yet is well suited for application by small projects with limited resources. The methodology has been developed at the Los Alamos Weapons Neutron Research (WNR) Facility and was utilized during the recent development of the WNR Data Acquisition Command Language. The methodology emphasizes the development and maintenance of comprehensive documentation for all software components. The impact of the methodology upon software quality and programmer productivity is assessed

  11. Workflow-Based Software Development Environment

    Science.gov (United States)

    Izygon, Michel E.

    2013-01-01

    The Software Developer's Assistant (SDA) helps software teams more efficiently and accurately conduct or execute software processes associated with NASA mission-critical software. SDA is a process enactment platform that guides software teams through project-specific standards, processes, and procedures. Software projects are decomposed into all of their required process steps or tasks, and each task is assigned to project personnel. SDA orchestrates the performance of work required to complete all process tasks in the correct sequence. The software then notifies team members when they may begin work on their assigned tasks and provides the tools, instructions, reference materials, and supportive artifacts that allow users to compliantly perform the work. A combination of technology components captures and enacts any software process use to support the software lifecycle. It creates an adaptive workflow environment that can be modified as needed. SDA achieves software process automation through a Business Process Management (BPM) approach to managing the software lifecycle for mission-critical projects. It contains five main parts: TieFlow (workflow engine), Business Rules (rules to alter process flow), Common Repository (storage for project artifacts, versions, history, schedules, etc.), SOA (interface to allow internal, GFE, or COTS tools integration), and the Web Portal Interface (collaborative web environment

  12. Great software debates

    CERN Document Server

    Davis, A

    2004-01-01

    The industry’s most outspoken and insightful critic explains how the software industry REALLY works. In Great Software Debates, Al Davis, shares what he has learned about the difference between the theory and the realities of business and encourages you to question and think about software engineering in ways that will help you succeed where others fail. In short, provocative essays, Davis fearlessly reveals the truth about process improvement, productivity, software quality, metrics, agile development, requirements documentation, modeling, software marketing and sales, empiricism, start-up financing, software research, requirements triage, software estimation, and entrepreneurship.

  13. The MINERVA Software Development Process

    Science.gov (United States)

    Narkawicz, Anthony; Munoz, Cesar A.; Dutle, Aaron M.

    2017-01-01

    This paper presents a software development process for safety-critical software components of cyber-physical systems. The process is called MINERVA, which stands for Mirrored Implementation Numerically Evaluated against Rigorously Verified Algorithms. The process relies on formal methods for rigorously validating code against its requirements. The software development process uses: (1) a formal specification language for describing the algorithms and their functional requirements, (2) an interactive theorem prover for formally verifying the correctness of the algorithms, (3) test cases that stress the code, and (4) numerical evaluation on these test cases of both the algorithm specifications and their implementations in code. The MINERVA process is illustrated in this paper with an application to geo-containment algorithms for unmanned aircraft systems. These algorithms ensure that the position of an aircraft never leaves a predetermined polygon region and provide recovery maneuvers when the region is inadvertently exited.

  14. Views on Software Testability

    OpenAIRE

    Shimeall, Timothy; Friedman, Michael; Chilenski, John; Voas, Jeffrey

    1994-01-01

    The field of testability is an active, well-established part of engineering of modern computer systems. However, only recently have technologies for software testability began to be developed. These technologies focus on accessing the aspects of software that improve or depreciate the ease of testing. As both the size of implemented software and the amount of effort required to test that software increase, so will the important of software testability technologies in influencing the softwa...

  15. Agile software assessment

    OpenAIRE

    Nierstrasz Oscar; Lungu Mircea

    2012-01-01

    Informed decision making is a critical activity in software development but it is poorly supported by common development environments which focus mainly on low level programming tasks. We posit the need for agile software assessment which aims to support decision making by enabling rapid and effective construction of software models and custom analyses. Agile software assessment entails gathering and exploiting the broader context of software information related to the system at hand as well ...

  16. Creating and Testing Simulation Software

    Science.gov (United States)

    Heinich, Christina M.

    2013-01-01

    The goal of this project is to learn about the software development process, specifically the process to test and fix components of the software. The paper will cover the techniques of testing code, and the benefits of using one style of testing over another. It will also discuss the overall software design and development lifecycle, and how code testing plays an integral role in it. Coding is notorious for always needing to be debugged due to coding errors or faulty program design. Writing tests either before or during program creation that cover all aspects of the code provide a relatively easy way to locate and fix errors, which will in turn decrease the necessity to fix a program after it is released for common use. The backdrop for this paper is the Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI), a project whose goal is to simulate a launch using simulated models of the ground systems and the connections between them and the control room. The simulations will be used for training and to ensure that all possible outcomes and complications are prepared for before the actual launch day. The code being tested is the Programmable Logic Controller Interface (PLCIF) code, the component responsible for transferring the information from the models to the model Programmable Logic Controllers (PLCs), basic computers that are used for very simple tasks.

  17. Software Quality Assurance Metrics

    Science.gov (United States)

    McRae, Kalindra A.

    2004-01-01

    Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.

  18. Software qualification in safety applications

    International Nuclear Information System (INIS)

    Lawrence, J.D.

    2000-01-01

    The developers of safety-critical instrumentation and control systems must qualify the design of the components used, including the software in the embedded computer systems, in order to ensure that the component can be trusted to perform its safety function under the full range of operating conditions. There are well known ways to qualify analog systems using the facts that: (1) they are built from standard modules with known properties; (2) design documents are available and described in a well understood language; (3) the performance of the component is constrained by physics; and (4) physics models exist to predict the performance. These properties are not generally available for qualifying software, and one must fall back on extensive testing and qualification of the design process. Neither of these is completely satisfactory. The research reported here is exploring an alternative approach that is intended to permit qualification for an important subset of instrumentation software. The research goal is to determine if a combination of static analysis and limited testing can be used to qualify a class of simple, but practical, computer-based instrumentation components for safety application. These components are of roughly the complexity of a motion detector alarm controller. This goal is accomplished by identifying design constraints that enable meaningful analysis and testing. Once such design constraints are identified, digital systems can be designed to allow for analysis and testing, or existing systems may be tested for conformance to the design constraints as a first step in a qualification process. This will considerably reduce the cost and monetary risk involved in qualifying commercial components for safety-critical service

  19. Computational Homology for Software Validation

    Science.gov (United States)

    2015-03-01

    involving compound data-types. 15. SUBJECT TERMS Abstract datatypes , convergence structure, topological methods, specification logics, hybrid software...composite datatype values are networks strewn through the device’s memory; think of a variable whose type is an array of balanced trees. Some means...structural in nature, is required to rigorously specify the evolution of composite states involving non-numerical, non-metric components. Composite datatypes

  20. Computer software design description for the integrated control and data acquisition system LDUA system

    International Nuclear Information System (INIS)

    Aftanas, B.L.

    1998-01-01

    This Computer Software Design Description (CSDD) document provides the overview of the software design for all the software that is part of the integrated control and data acquisition system of the Light Duty Utility Arm System (LDUA). It describes the major software components and how they interface. It also references the documents that contain the detailed design description of the components

  1. Electronic components

    CERN Document Server

    Colwell, Morris A

    1976-01-01

    Electronic Components provides a basic grounding in the practical aspects of using and selecting electronics components. The book describes the basic requirements needed to start practical work on electronic equipment, resistors and potentiometers, capacitance, and inductors and transformers. The text discusses semiconductor devices such as diodes, thyristors and triacs, transistors and heat sinks, logic and linear integrated circuits (I.C.s) and electromechanical devices. Common abbreviations applied to components are provided. Constructors and electronics engineers will find the book useful

  2. Open Component Portability Infrastructure (OPENCPI)

    Science.gov (United States)

    2013-03-01

    declaration of the authored worker that must be implemented . If there is existing legacy VHDL entity architecture, then it is wrapped or modified to...that the software implementations were written to. Since all of the original code was VHDL , the HDL Authoring Model for VHDL was enhanced to meet...engineering process. This application was completed for the execution of all the components, the software implementations , and the VHDL skeletons for the

  3. TMT approach to observatory software development process

    Science.gov (United States)

    Buur, Hanne; Subramaniam, Annapurni; Gillies, Kim; Dumas, Christophe; Bhatia, Ravinder

    2016-07-01

    The purpose of the Observatory Software System (OSW) is to integrate all software and hardware components of the Thirty Meter Telescope (TMT) to enable observations and data capture; thus it is a complex software system that is defined by four principal software subsystems: Common Software (CSW), Executive Software (ESW), Data Management System (DMS) and Science Operations Support System (SOSS), all of which have interdependencies with the observatory control systems and data acquisition systems. Therefore, the software development process and plan must consider dependencies to other subsystems, manage architecture, interfaces and design, manage software scope and complexity, and standardize and optimize use of resources and tools. Additionally, the TMT Observatory Software will largely be developed in India through TMT's workshare relationship with the India TMT Coordination Centre (ITCC) and use of Indian software industry vendors, which adds complexity and challenges to the software development process, communication and coordination of activities and priorities as well as measuring performance and managing quality and risk. The software project management challenge for the TMT OSW is thus a multi-faceted technical, managerial, communications and interpersonal relations challenge. The approach TMT is using to manage this multifaceted challenge is a combination of establishing an effective geographically distributed software team (Integrated Product Team) with strong project management and technical leadership provided by the TMT Project Office (PO) and the ITCC partner to manage plans, process, performance, risk and quality, and to facilitate effective communications; establishing an effective cross-functional software management team composed of stakeholders, OSW leadership and ITCC leadership to manage dependencies and software release plans, technical complexities and change to approved interfaces, architecture, design and tool set, and to facilitate

  4. Reliability analysis of software based safety functions

    International Nuclear Information System (INIS)

    Pulkkinen, U.

    1993-05-01

    The methods applicable in the reliability analysis of software based safety functions are described in the report. Although the safety functions also include other components, the main emphasis in the report is on the reliability analysis of software. The check list type qualitative reliability analysis methods, such as failure mode and effects analysis (FMEA), are described, as well as the software fault tree analysis. The safety analysis based on the Petri nets is discussed. The most essential concepts and models of quantitative software reliability analysis are described. The most common software metrics and their combined use with software reliability models are discussed. The application of software reliability models in PSA is evaluated; it is observed that the recent software reliability models do not produce the estimates needed in PSA directly. As a result from the study some recommendations and conclusions are drawn. The need of formal methods in the analysis and development of software based systems, the applicability of qualitative reliability engineering methods in connection to PSA and the need to make more precise the requirements for software based systems and their analyses in the regulatory guides should be mentioned. (orig.). (46 refs., 13 figs., 1 tab.)

  5. Test process for the safety-critical embedded software

    International Nuclear Information System (INIS)

    Sung, Ahyoung; Choi, Byoungju; Lee, Jangsoo

    2004-01-01

    Digitalization of nuclear Instrumentation and Control (I and C) system requires high reliability of not only hardware but also software. Verification and Validation (V and V) process is recommended for software reliability. But a more quantitative method is necessary such as software testing. Most of software in the nuclear I and C system is safety-critical embedded software. Safety-critical embedded software is specified, verified and developed according to V and V process. Hence two types of software testing techniques are necessary for the developed code. First, code-based software testing is required to examine the developed code. Second, after code-based software testing, software testing affected by hardware is required to reveal the interaction fault that may cause unexpected results. We call the testing of hardware's influence on software, an interaction testing. In case of safety-critical embedded software, it is also important to consider the interaction between hardware and software. Even if no faults are detected when testing either hardware or software alone, combining these components may lead to unexpected results due to the interaction. In this paper, we propose a software test process that embraces test levels, test techniques, required test tasks and documents for safety-critical embedded software. We apply the proposed test process to safety-critical embedded software as a case study, and show the effectiveness of it. (author)

  6. Predicting Software Suitability Using a Bayesian Belief Network

    Science.gov (United States)

    Beaver, Justin M.; Schiavone, Guy A.; Berrios, Joseph S.

    2005-01-01

    The ability to reliably predict the end quality of software under development presents a significant advantage for a development team. It provides an opportunity to address high risk components earlier in the development life cycle, when their impact is minimized. This research proposes a model that captures the evolution of the quality of a software product, and provides reliable forecasts of the end quality of the software being developed in terms of product suitability. Development team skill, software process maturity, and software problem complexity are hypothesized as driving factors of software product quality. The cause-effect relationships between these factors and the elements of software suitability are modeled using Bayesian Belief Networks, a machine learning method. This research presents a Bayesian Network for software quality, and the techniques used to quantify the factors that influence and represent software quality. The developed model is found to be effective in predicting the end product quality of small-scale software development efforts.

  7. An empirical study of software architectures' effect on product quality

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius; Jonasson, Kristjan; Neukirchen, Helmut

    2011-01-01

    Software architectures shift the focus of developers from lines-of-code to coarser-grained components and their interconnection structure. Unlike 2ne-grained objects, these components typically encompass business functionality and need to be aware of the underlying business processes. Hence......, the interface of a component should re4ect relevant parts of the business process and the software architecture should emphasize the coordination among components. To shed light on these issues, we provide a framework for component-based software architectures focusing on the process perspective. The interface...

  8. Spectrum-based Fault Localization in Embedded Software

    NARCIS (Netherlands)

    Abreu, R.

    2009-01-01

    Locating software components that are responsible for observed failures is a time-intensive and expensive phase in the software development cycle. Automatic fault localization techniques aid developers/testers in pinpointing the root cause of software failures, as such reducing the debugging effort.

  9. Customer configuration updating in a software supply network

    NARCIS (Netherlands)

    Jansen, S.R.L.

    2007-01-01

    Product software development is the activity of development, modification, reuse, re-engineering, maintenance, or any other activities that result in packaged configurations of software components or software-based services that are released for and traded in a specific market \\cite{XuBrinkkemper}.

  10. A Conceptual Framework for Lean Regulated Software Development

    DEFF Research Database (Denmark)

    Cawley, Oisin; Richardson, Ita; Wang, Xiaofeng

    2015-01-01

    for software development within a regulated environment? This poster presents the results of our empirical research into lean and regulated software development. Built from a combination of data sources, we have developed a conceptual framework comprising five primary components. In addition the relationships...... they have with both the central focus of the framework (the situated software development practices) and with each other are indicated....

  11. Software Engineering Improvement Plan

    Science.gov (United States)

    2006-01-01

    In performance of this task order, bd Systems personnel provided support to the Flight Software Branch and the Software Working Group through multiple tasks related to software engineering improvement and to activities of the independent Technical Authority (iTA) Discipline Technical Warrant Holder (DTWH) for software engineering. To ensure that the products, comments, and recommendations complied with customer requirements and the statement of work, bd Systems personnel maintained close coordination with the customer. These personnel performed work in areas such as update of agency requirements and directives database, software effort estimation, software problem reports, a web-based process asset library, miscellaneous documentation review, software system requirements, issue tracking software survey, systems engineering NPR, and project-related reviews. This report contains a summary of the work performed and the accomplishments in each of these areas.

  12. Spotting software errors sooner

    International Nuclear Information System (INIS)

    Munro, D.

    1989-01-01

    Static analysis is helping to identify software errors at an earlier stage and more cheaply than conventional methods of testing. RTP Software's MALPAS system also has the ability to check that a code conforms to its original specification. (author)

  13. Avionics and Software Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of the AES Avionics and Software (A&S) project is to develop a reference avionics and software architecture that is based on standards and that can be...

  14. Paladin Software Support Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The Paladin Software Support Environment (SSE) occupies 2,241 square-feet. It contains the hardware and software tools required to support the Paladin Automatic Fire...

  15. Pragmatic Software Innovation

    DEFF Research Database (Denmark)

    Aaen, Ivan; Jensen, Rikke Hagensby

    2014-01-01

    We understand software innovation as concerned with introducing innovation into the development of software intensive systems, i.e. systems in which software development and/or integration are dominant considerations. Innovation is key in almost any strategy for competitiveness in existing markets......, for creating new markets, or for curbing rising public expenses, and software intensive systems are core elements in most such strategies. Software innovation therefore is vital for about every sector of the economy. Changes in software technologies over the last decades have opened up for experimentation......, learning, and flexibility in ongoing software projects, but how can this change be used to facilitate software innovation? How can a team systematically identify and pursue opportunities to create added value in ongoing projects? In this paper, we describe Deweyan pragmatism as the philosophical foundation...

  16. Process mining software repositories

    NARCIS (Netherlands)

    Poncin, W.; Serebrenik, A.; Brand, van den M.G.J.

    2011-01-01

    Software developers' activities are in general recorded in software repositories such as version control systems, bug trackers and mail archives. While abundant information is usually present in such repositories, successful information extraction is often challenged by the necessity to

  17. Optimization of Antivirus Software

    OpenAIRE

    Catalin BOJA; Adrian VISOIU

    2007-01-01

    The paper describes the main techniques used in development of computer antivirus software applications. For this particular category of software, are identified and defined optimum criteria that helps determine which solution is better and what are the objectives of the optimization process. From the general viewpoint of software optimization are presented methods and techniques that are applied at code development level. Regarding the particularities of antivirus software, the paper analyze...

  18. Open Source Software Development

    Science.gov (United States)

    2011-01-01

    appropriate to refer to FOSS or FLOSS (L for Libre , where the alternative term “ libre software ” has popularity in some parts of the world) in order...Applying Social Network Analysis to Community-Drive Libre Software Projects, Intern. J. Info. Tech. and Web Engineering, 2006, 1(3), 27-28. 17...Open Source Software Development* Walt Scacchi Institute for Software Researcher University of California, Irvine Irvine, CA 92697-3455 USA Abstract

  19. Gammasphere software development

    International Nuclear Information System (INIS)

    Piercey, R.B.

    1994-01-01

    This report describes the activities of the nuclear physics group at Mississippi State University which were performed during 1993. Significant progress has been made in the focus areas: chairing the Gammasphere Software Working Group (SWG); assisting with the porting and enhancement of the ORNL UPAK histogramming software package; and developing standard formats for Gammasphere data products. In addition, they have established a new public ftp archive to distribute software and software development tools and information

  20. Software engineer's pocket book

    CERN Document Server

    Tooley, Michael

    2013-01-01

    Software Engineer's Pocket Book provides a concise discussion on various aspects of software engineering. The book is comprised of six chapters that tackle various areas of concerns in software engineering. Chapter 1 discusses software development, and Chapter 2 covers programming languages. Chapter 3 deals with operating systems. The book also tackles discrete mathematics and numerical computation. Data structures and algorithms are also explained. The text will be of great use to individuals involved in the specification, design, development, implementation, testing, maintenance, and qualit

  1. Software Testing Requires Variability

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    2003-01-01

    Software variability is the ability of a software system or artefact to be changed, customized or configured for use in a particular context. Variability in software systems is important from a number of perspectives. Some perspectives rightly receive much attention due to their direct economic...... impact in software production. As is also apparent from the call for papers these perspectives focus on qualities such as reuse, adaptability, and maintainability....

  2. Computer software quality assurance

    International Nuclear Information System (INIS)

    Ives, K.A.

    1986-06-01

    The author defines some criteria for the evaluation of software quality assurance elements for applicability to the regulation of the nuclear industry. The author then analyses a number of software quality assurance (SQA) standards. The major extracted SQA elements are then discussed, and finally specific software quality assurance recommendations are made for the nuclear industry

  3. Software Architecture Evolution

    Science.gov (United States)

    Barnes, Jeffrey M.

    2013-01-01

    Many software systems eventually undergo changes to their basic architectural structure. Such changes may be prompted by new feature requests, new quality attribute requirements, changing technology, or other reasons. Whatever the causes, architecture evolution is commonplace in real-world software projects. Today's software architects, however,…

  4. XES Software Communication Extension

    NARCIS (Netherlands)

    Leemans, M.; Liu, C.

    2017-01-01

    During the execution of software, execution data can be recorded. With the development of process mining techniques on the one hand, and the growing availability of software execution data on the other hand, a new form of software analytics comes into reach. That is, applying process mining

  5. Neutron Scattering Software

    Science.gov (United States)

    Home Page | Facilities | Reference | Software | Conferences | Announcements | Mailing Lists Neutron Scattering Banner Neutron Scattering Software A new portal for neutron scattering has just been established sets KUPLOT: data plotting and fitting software ILL/TAS: Matlab probrams for analyzing triple axis data

  6. XES Software Event Extension

    NARCIS (Netherlands)

    Leemans, M.; Liu, C.

    2017-01-01

    During the execution of software, execution data can be recorded. With the development of process mining techniques on the one hand, and the growing availability of software execution data on the other hand, a new form of software analytics comes into reach. That is, applying process mining

  7. ARC Software and Models

    Science.gov (United States)

    Archives RESEARCH ▼ Research Areas Ongoing Projects Completed Projects SOFTWARE CONTACT ▼ Primary Contacts Researchers External Link MLibrary Deep Blue Software Archive Most research conducted at the ARC produce software code and methodologies that are transferred to TARDEC and industry partners. These

  8. XES Software Telemetry Extension

    NARCIS (Netherlands)

    Leemans, M.; Liu, C.

    2017-01-01

    During the execution of software, execution data can be recorded. With the development of process mining techniques on the one hand, and the growing availability of software execution data on the other hand, a new form of software analytics comes into reach. That is, applying process mining

  9. Specifications in software prototyping

    OpenAIRE

    Luqi; Chang, Carl K.; Zhu, Hong

    1998-01-01

    We explore the use of software speci®cations for software prototyping. This paper describes a process model for software prototyping, and shows how specifications can be used to support such a process via a cellular mobile phone switch example.

  10. Software Engineering for Portability.

    Science.gov (United States)

    Stanchev, Ivan

    1990-01-01

    Discussion of the portability of educational software focuses on the software design and development process. Topics discussed include levels of portability; the user-computer dialog; software engineering principles; design techniques for student performance records; techniques of courseware programing; and suggestions for further research and…

  11. Software Acquisition and Software Engineering Best Practices

    National Research Council Canada - National Science Library

    Eslinger, S

    1999-01-01

    The purpose of this white paper is to address the issues raised in the recently published Senate Armed Services Committee Report 106-50 concerning Software Management Improvements for the Department of Defense (DoD...

  12. Software Quality Assurance in Software Projects: A Study of Pakistan

    OpenAIRE

    Faisal Shafique Butt; Sundus Shaukat; M. Wasif Nisar; Ehsan Ullah Munir; Muhammad Waseem; Kashif Ayyub

    2013-01-01

    Software quality is specific property which tells what kind of standard software should have. In a software project, quality is the key factor of success and decline of software related organization. Many researches have been done regarding software quality. Software related organization follows standards introduced by Capability Maturity Model Integration (CMMI) to achieve good quality software. Quality is divided into three main layers which are Software Quality Assurance (SQA), Software Qu...

  13. Neural network-based retrieval from software reuse repositories

    Science.gov (United States)

    Eichmann, David A.; Srinivas, Kankanahalli

    1992-01-01

    A significant hurdle confronts the software reuser attempting to select candidate components from a software repository - discriminating between those components without resorting to inspection of the implementation(s). We outline an approach to this problem based upon neural networks which avoids requiring the repository administrators to define a conceptual closeness graph for the classification vocabulary.

  14. Software qualification for digital safety system in KNICS project

    International Nuclear Information System (INIS)

    Kwon, Kee-Choon; Lee, Dong-Young; Choi, Jong-Gyun

    2012-01-01

    In order to achieve technical self-reliance in the area of nuclear instrumentation and control, the Korea Nuclear Instrumentation and Control System (KNICS) project had been running for seven years from 2001. The safety-grade Programmable Logic Controller (PLC) and the digital safety system were developed by KNICS project. All the software of the PLC and digital safety system were developed and verified following the software development life cycle Verification and Validation (V and V) procedure. The main activities of the V and V process are preparation of software planning documentations, verification of the Software Requirement Specification (SRS), Software Design Specification (SDS) and codes, and a testing of the software components, the integrated software, and the integrated system. In addition, a software safety analysis and a software configuration management are included in the activities. For the software safety analysis at the SRS and SDS phases, the software Hazard Operability (HAZOP) was performed and then the software fault tree analysis was applied. The software fault tree analysis was applied to a part of software module with some critical defects identified by the software HAZOP in SDS phase. The software configuration management was performed using the in-house tool developed in the KNICS project. (author)

  15. Computer, Network, Software, and Hardware Engineering with Applications

    CERN Document Server

    Schneidewind, Norman F

    2012-01-01

    There are many books on computers, networks, and software engineering but none that integrate the three with applications. Integration is important because, increasingly, software dominates the performance, reliability, maintainability, and availability of complex computer and systems. Books on software engineering typically portray software as if it exists in a vacuum with no relationship to the wider system. This is wrong because a system is more than software. It is comprised of people, organizations, processes, hardware, and software. All of these components must be considered in an integr

  16. Business engineering. Generic Software Architecture in an Object Oriented View

    Directory of Open Access Journals (Sweden)

    Mihaela MURESAN

    2006-01-01

    Full Text Available The generic software architecture offers a solution for the the information system's development and implementation. A generic software/non-software model could be developed by integrating the enterprise blueprint concept (Zachman and the object oriented paradigm (Coad's archetype concept. The standardization of the generic software architecture for various specific software components could be a direction of crucial importance, offering the guarantee of the quality of the model and increasing the efficiency of the design, development and implementation of the software. This approach is also useful for the implementation of the ERP systems designed to fit the user’s particular requirements.

  17. Licensing safety critical software

    International Nuclear Information System (INIS)

    Archinoff, G.H.; Brown, R.A.

    1990-01-01

    Licensing difficulties with the shutdown system software at the Darlington Nuclear Generating Station contributed to delays in starting up the station. Even though the station has now been given approval by the Atomic Energy Control Board (AECB) to operate, the software issue has not disappeared - Ontario Hydro has been instructed by the AECB to redesign the software. This article attempts to explain why software based shutdown systems were chosen for Darlington, why there was so much difficulty licensing them, and what the implications are for other safety related software based applications

  18. Medical device software: defining key terms.

    Science.gov (United States)

    Pashkov, Vitalii; Gutorova, Nataliya; Harkusha, Andrii

    one of the areas of significant growth in medical devices has been the role of software - as an integral component of a medical device, as a standalone device and more recently as applications on mobile devices. The risk related to a malfunction of the standalone software used within healthcare is in itself not a criterion for its qualification or not as a medical device. It is therefore, necessary to clarify some criteria for the qualification of stand-alone software as medical devices Materials and methods: Ukrainian, European Union, United States of America legislation, Guidelines developed by European Commission and Food and Drug Administration's, recommendations represented by international voluntary group and scientific works. This article is based on dialectical, comparative, analytic, synthetic and comprehensive research methods. the legal regulation of software which is used for medical purpose in Ukraine limited to one definition. In European Union and United States of America were developed and applying special guidelines that help developers, manufactures and end users to difference software on types standing on medical purpose criteria. Software becomes more and more incorporated into medical devices. Developers and manufacturers may not have initially appreciated potential risks to patients and users such situation could have dangerous results for patients or users. It is necessary to develop and adopt the legislation that will intend to define the criteria for the qualification of medical device software and the application of the classification criteria to such software, provide some illustrative examples and step by step recommendations to qualify software as medical device.

  19. Software criticality analysis of COTS/SOUP

    International Nuclear Information System (INIS)

    Bishop, Peter; Bloomfield, Robin; Clement, Tim; Guerra, Sofia

    2003-01-01

    This paper describes the Software Criticality Analysis (SCA) approach that was developed to support the justification of using commercial off-the-shelf software (COTS) in a safety-related system. The primary objective of SCA is to assess the importance to safety of the software components within the COTS and to show there is segregation between software components with different safety importance. The approach taken was a combination of Hazops based on design documents and on a detailed analysis of the actual code (100 kloc). Considerable effort was spent on validation and ensuring the conservative nature of the results. The results from reverse engineering from the code showed that results based only on architecture and design documents would have been misleading

  20. Software reliability for safety-critical applications

    International Nuclear Information System (INIS)

    Everett, B.; Musa, J.

    1994-01-01

    In this talk, the authors address the question open-quotes Can Software Reliability Engineering measurement and modeling techniques be applied to safety-critical applications?close quotes Quantitative techniques have long been applied in engineering hardware components of safety-critical applications. The authors have seen a growing acceptance and use of quantitative techniques in engineering software systems but a continuing reluctance in using such techniques in safety-critical applications. The general case posed against using quantitative techniques for software components runs along the following lines: safety-critical applications should be engineered such that catastrophic failures occur less frequently than one in a billion hours of operation; current software measurement/modeling techniques rely on using failure history data collected during testing; one would have to accumulate over a billion operational hours to verify failure rate objectives of about one per billion hours

  1. Software criticality analysis of COTS/SOUP

    Energy Technology Data Exchange (ETDEWEB)

    Bishop, Peter; Bloomfield, Robin; Clement, Tim; Guerra, Sofia

    2003-09-01

    This paper describes the Software Criticality Analysis (SCA) approach that was developed to support the justification of using commercial off-the-shelf software (COTS) in a safety-related system. The primary objective of SCA is to assess the importance to safety of the software components within the COTS and to show there is segregation between software components with different safety importance. The approach taken was a combination of Hazops based on design documents and on a detailed analysis of the actual code (100 kloc). Considerable effort was spent on validation and ensuring the conservative nature of the results. The results from reverse engineering from the code showed that results based only on architecture and design documents would have been misleading.

  2. HAZARD ANALYSIS SOFTWARE

    International Nuclear Information System (INIS)

    Sommer, S; Tinh Tran, T.

    2008-01-01

    Washington Safety Management Solutions, LLC developed web-based software to improve the efficiency and consistency of hazard identification and analysis, control selection and classification, and to standardize analysis reporting at Savannah River Site. In the new nuclear age, information technology provides methods to improve the efficiency of the documented safety analysis development process which includes hazard analysis activities. This software provides a web interface that interacts with a relational database to support analysis, record data, and to ensure reporting consistency. A team of subject matter experts participated in a series of meetings to review the associated processes and procedures for requirements and standard practices. Through these meetings, a set of software requirements were developed and compiled into a requirements traceability matrix from which software could be developed. The software was tested to ensure compliance with the requirements. Training was provided to the hazard analysis leads. Hazard analysis teams using the software have verified its operability. The software has been classified as NQA-1, Level D, as it supports the analysis team but does not perform the analysis. The software can be transported to other sites with alternate risk schemes. The software is being used to support the development of 14 hazard analyses. User responses have been positive with a number of suggestions for improvement which are being incorporated as time permits. The software has enforced a uniform implementation of the site procedures. The software has significantly improved the efficiency and standardization of the hazard analysis process

  3. Software Validation in ATLAS

    International Nuclear Information System (INIS)

    Hodgkinson, Mark; Seuster, Rolf; Simmons, Brinick; Sherwood, Peter; Rousseau, David

    2012-01-01

    The ATLAS collaboration operates an extensive set of protocols to validate the quality of the offline software in a timely manner. This is essential in order to process the large amounts of data being collected by the ATLAS detector in 2011 without complications on the offline software side. We will discuss a number of different strategies used to validate the ATLAS offline software; running the ATLAS framework software, Athena, in a variety of configurations daily on each nightly build via the ATLAS Nightly System (ATN) and Run Time Tester (RTT) systems; the monitoring of these tests and checking the compilation of the software via distributed teams of rotating shifters; monitoring of and follow up on bug reports by the shifter teams and periodic software cleaning weeks to improve the quality of the offline software further.

  4. Developing a Model Component

    Science.gov (United States)

    Fields, Christina M.

    2013-01-01

    The Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI) is responsible for providing simulations to support test and verification of SCCS hardware and software. The Universal Coolant Transporter System (UCTS) was a Space Shuttle Orbiter support piece of the Ground Servicing Equipment (GSE). The initial purpose of the UCTS was to provide two support services to the Space Shuttle Orbiter immediately after landing at the Shuttle Landing Facility. The UCTS is designed with the capability of servicing future space vehicles; including all Space Station Requirements necessary for the MPLM Modules. The Simulation uses GSE Models to stand in for the actual systems to support testing of SCCS systems during their development. As an intern at Kennedy Space Center (KSC), my assignment was to develop a model component for the UCTS. I was given a fluid component (dryer) to model in Simulink. I completed training for UNIX and Simulink. The dryer is a Catch All replaceable core type filter-dryer. The filter-dryer provides maximum protection for the thermostatic expansion valve and solenoid valve from dirt that may be in the system. The filter-dryer also protects the valves from freezing up. I researched fluid dynamics to understand the function of my component. The filter-dryer was modeled by determining affects it has on the pressure and velocity of the system. I used Bernoulli's Equation to calculate the pressure and velocity differential through the dryer. I created my filter-dryer model in Simulink and wrote the test script to test the component. I completed component testing and captured test data. The finalized model was sent for peer review for any improvements. I participated in Simulation meetings and was involved in the subsystem design process and team collaborations. I gained valuable work experience and insight into a career path as an engineer.

  5. Co-sourcing in software development offshoring

    DEFF Research Database (Denmark)

    Schlichter, Bjarne Rerup; Persson, John Stouby

    2013-01-01

    Software development projects are increasingly geographical distributed with offshoring, which introduce complex risks that can lead to project failure. Co-sourcing is a highly integrative and cohesive approach, seen successful, to software development offshoring. However, research of how co-sour......-taking by high attention to of the closely interrelated structure and technology components in terms of CMMI and the actors’ cohesion and integration in terms of Scrum....

  6. General software design for multisensor data fusion

    Science.gov (United States)

    Zhang, Junliang; Zhao, Yuming

    1999-03-01

    In this paper a general method of software design for multisensor data fusion is discussed in detail, which adopts object-oriented technology under UNIX operation system. The software for multisensor data fusion is divided into six functional modules: data collection, database management, GIS, target display and alarming data simulation etc. Furthermore, the primary function, the components and some realization methods of each modular is given. The interfaces among these functional modular relations are discussed. The data exchange among each functional modular is performed by interprocess communication IPC, including message queue, semaphore and shared memory. Thus, each functional modular is executed independently, which reduces the dependence among functional modules and helps software programing and testing. This software for multisensor data fusion is designed as hierarchical structure by the inheritance character of classes. Each functional modular is abstracted and encapsulated through class structure, which avoids software redundancy and enhances readability.

  7. Manifesto for the Software Development Professionalization

    Directory of Open Access Journals (Sweden)

    Red Latinoamericana en Ingeniería de Software (RedLatinaIS

    2013-12-01

    Full Text Available One of the central problems of current economic development and industrial competitiveness, social and scientific, is the complexity of large and intensive software systems, and processes for their development and implementation. This complexity is defined by the amount and heterogeneity of the interaction of the hardware with the software components, their inter-relationships, of incorporation of the technical and organizational environments, and the interfaces to humans. The domain of these systems requires actions and scientific thoughts, hierarchical and systematic; also, the success of the products, services and organizations, is increasingly determined by the availability of suitable software products. Therefore, highly qualified professionals, able to understand and master the systems, involved in the entire life cycle of software engineering, and adopt different roles during the development. This is the reason that guide the thinking of this Manifesto , which aims is to achieve the Professionalization of Software Development.

  8. Proposal for a New ’Rights in Software’ Clause for Software Acquisitions by the Department of Defense.

    Science.gov (United States)

    1986-09-01

    point here Is that the capital cost of design and development (including the cost of software tools and/or CAD/CAM programs which aided in the development...and capitalization , software Is in many ways more Ike a hardware component than it is Ike the tech- nical documentation which supports the hardware...Invoked, the owner of intelectual property rights in software may attach appropriate copyright notices to software delivered under this contract. 2.2.2

  9. Formalizing the ISDF Software Development Methodology

    Directory of Open Access Journals (Sweden)

    Mihai Liviu DESPA

    2015-01-01

    Full Text Available The paper is aimed at depicting the ISDF software development methodology by emphasizing quality management and software development lifecycle. The ISDF methodology was built especially for innovative software development projects. The ISDF methodology was developed empirically by trial and error in the process of implementing multiple innovative projects. The research process began by analysing key concepts like innovation and software development and by settling the important dilemma of what makes a web application innovative. Innovation in software development is presented from the end-user, project owner and project manager’s point of view. The main components of a software development methodology are identified. Thus a software development methodology should account for people, roles, skills, teams, tools, techniques, processes, activities, standards, quality measuring tools, and team values. Current software development models are presented and briefly analysed. The need for a dedicated innovation oriented software development methodology is emphasized by highlighting shortcomings of current software development methodologies when tackling innovation. The ISDF methodology is presented in the context of developing an actual application. The ALHPA application is used as a case study for emphasizing the characteristics of the ISDF methodology. The development life cycle of the ISDF methodology includes research, planning, prototyping, design, development, testing, setup and maintenance. Artefacts generated by the ISDF methodology are presented. Quality is managed in the ISDF methodology by assessing compliance, usability, reliability, repeatability, availability and security. In order to properly asses each quality component a dedicated indicator is built. A template for interpreting each indicator is provided. Conclusions are formulated and new related research topics are submitted for debate.

  10. Achieving strategic surety for high consequence software

    Energy Technology Data Exchange (ETDEWEB)

    Pollock, G.M.

    1996-09-01

    A strategic surety roadmap for high consequence software systems under the High Integrity Software (HIS) Program at Sandia National Laboratories guides research in identifying methodologies to improve software surety. Selected research tracks within this roadmap are identified and described detailing current technology and outlining advancements to be pursued over the coming decade to reach HIS goals. The tracks discussed herein focus on Correctness by Design, and System Immunology{trademark}. Specific projects are discussed with greater detail given on projects involving Correct Specification via Visualization, Synthesis, & Analysis; Visualization of Abstract Objects; and Correct Implementation of Components.

  11. NASA software documentation standard software engineering program

    Science.gov (United States)

    1991-01-01

    The NASA Software Documentation Standard (hereinafter referred to as Standard) can be applied to the documentation of all NASA software. This Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. This basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

  12. Science and Software

    Science.gov (United States)

    Zelt, C. A.

    2017-12-01

    Earth science attempts to understand how the earth works. This research often depends on software for modeling, processing, inverting or imaging. Freely sharing open-source software is essential to prevent reinventing the wheel and allows software to be improved and applied in ways the original author may never have envisioned. For young scientists, releasing software can increase their name ID when applying for jobs and funding, and create opportunities for collaborations when scientists who collect data want the software's creator to be involved in their project. However, we frequently hear scientists say software is a tool, it's not science. Creating software that implements a new or better way of earth modeling or geophysical processing, inverting or imaging should be viewed as earth science. Creating software for things like data visualization, format conversion, storage, or transmission, or programming to enhance computational performance, may be viewed as computer science. The former, ideally with an application to real data, can be published in earth science journals, the latter possibly in computer science journals. Citations in either case should accurately reflect the impact of the software on the community. Funding agencies need to support more software development and open-source releasing, and the community should give more high-profile awards for developing impactful open-source software. Funding support and community recognition for software development can have far reaching benefits when the software is used in foreseen and unforeseen ways, potentially for years after the original investment in the software development. For funding, an open-source release that is well documented should be required, with example input and output files. Appropriate funding will provide the incentive and time to release user-friendly software, and minimize the need for others to duplicate the effort. All funded software should be available through a single web site

  13. Software Maintenance and Evolution: The Implication for Software ...

    African Journals Online (AJOL)

    Software Maintenance and Evolution: The Implication for Software Development. ... Software maintenance is the process of modifying existing operational software by correcting errors, ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  14. MAUS: MICE Analysis User Software

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    The Muon Ionization Cooling Experiment (MICE) has developed the MICE Analysis User Software (MAUS) to simulate and analyse experimental data. It serves as the primary codebase for the experiment, providing for online data quality checks and offline batch simulation and reconstruction. The code is structured in a Map-Reduce framework to allow parallelization whether on a personal machine or in the control room. Various software engineering practices from industry are also used to ensure correct and maintainable physics code, which include unit, functional and integration tests, continuous integration and load testing, code reviews, and distributed version control systems. Lastly, there are various small design decisions like using JSON as the data structure, using SWIG to allow developers to write components in either Python or C++, or using the SCons python-based build system that may be of interest to other experiments.

  15. The NLC Software Requirements Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Shoaee, Hamid

    2002-08-20

    We describe the software requirements and development methodology developed for the NLC control system. Given the longevity of that project, and the likely geographical distribution of the collaborating engineers, the planned requirements management process is somewhat more formal than the norm in high energy physics projects. The short term goals of the requirements process are to accurately estimate costs, to decompose the problem, and to determine likely technologies. The long term goal is to enable a smooth transition from high level functional requirements to specific subsystem and component requirements for individual programmers, and to support distributed development. The methodology covers both ends of that life cycle. It covers both the analytical and documentary tools for software engineering, and project management support. This paper introduces the methodology, which is fully described in [1].

  16. Techniques and tools for software qualification in KNICS

    International Nuclear Information System (INIS)

    Cha, Kyung H.; Lee, Yeong J.; Cheon, Se W.; Kim, Jang Y.; Lee, Jang S.; Kwon, Kee C.

    2004-01-01

    This paper describes techniques and tools for qualifying safety software in Korea Nuclear Instrumentation and Control System (KNICS). Safety software are developed and applied for a Reactor Protection System (RPS), an Engineered Safety Features and Component Control System (ESF-CCS), and a safety Programmable Logic Controller (PLC) in the KNICS. Requirements and design specifications of safety software are written by both natural language and formal specification languages. Statechart is used for formal specification of software of the ESF-CCS and the safety PLC while NuSCR is used for formal specification of them of the RPS. pSET (POSCON Software Engineering Tool) as a software development tool has been developed and utilized for the IEC61131-3 based PLC programming. The qualification of the safety software consists of software verification and validation (V and V) through software life cycle, software safety analysis, and software configuration management, software quality assurance, and COTS (Commercial-Off-The-Shelf) dedication. The criteria and requirements for qualifying the safety software have been established with them in Software Review Plan (SRP)/Branch Technical Positions (BTP)-14, IEEE Std. 7-4.3.2-1998, NUREG/CR-6463, IEEE Std. 1012-1998, and so on. Figure 1 summarizes qualification techniques and tools for the safety software

  17. Software Defined Networking Demands on Software Technologies

    DEFF Research Database (Denmark)

    Galinac Grbac, T.; Caba, Cosmin Marius; Soler, José

    2015-01-01

    Software Defined Networking (SDN) is a networking approach based on a centralized control plane architecture with standardised interfaces between control and data planes. SDN enables fast configuration and reconfiguration of the network to enhance resource utilization and service performances....... This new approach enables a more dynamic and flexible network, which may adapt to user needs and application requirements. To this end, systemized solutions must be implemented in network software, aiming to provide secure network services that meet the required service performance levels. In this paper......, we review this new approach to networking from an architectural point of view, and identify and discuss some critical quality issues that require new developments in software technologies. These issues we discuss along with use case scenarios. Here in this paper we aim to identify challenges...

  18. Component Verification and Certification in NASA Missions

    Science.gov (United States)

    Giannakopoulou, Dimitra; Penix, John; Norvig, Peter (Technical Monitor)

    2001-01-01

    Software development for NASA missions is a particularly challenging task. Missions are extremely ambitious scientifically, have very strict time frames, and must be accomplished with a maximum degree of reliability. Verification technologies must therefore be pushed far beyond their current capabilities. Moreover, reuse and adaptation of software architectures and components must be incorporated in software development within and across missions. This paper discusses NASA applications that we are currently investigating from these perspectives.

  19. Principal components

    NARCIS (Netherlands)

    Hallin, M.; Hörmann, S.; Piegorsch, W.; El Shaarawi, A.

    2012-01-01

    Principal Components are probably the best known and most widely used of all multivariate analysis techniques. The essential idea consists in performing a linear transformation of the observed k-dimensional variables in such a way that the new variables are vectors of k mutually orthogonal

  20. Overview of NWIS Software

    International Nuclear Information System (INIS)

    Mullens, J.A.

    1999-01-01

    The Nuclear Weapons Identification System (NWIS) is a system that performs radiation signature measurements on objects such as nuclear weapons components. NWIS consists of a 252 Cf fission source, radiation detectors and associated analog electronics, data acquisition boards, and a computer running Windows NT and the application software. NWIS uses signal processing techniques to produce a radiation signature from the radiation emitted from the object. This signature can be stored and later compared to another signature to determine whether two objects are similar. A library of such signatures can be used to identify objects in closed containers as well as determine attributes such as fissile mass and in some cases enrichment. NWIS uses a 252 Cf source on one side of the object to produce radiation that its detectors measure on the other side of the target (active mode). If the object naturally emits enough radiation, the 252 Cf source is not required (passive mode). The NWIS data acquisition hardware has five detector channels. Each channel receives shaped detector pulses and times those pulses with 1 nanosecond resolution. In active mode measurements one of these channels receives pulses from a detector measuring the 252 Cf source fissions. Thus, for active mode measurements, NWIS has the time of each 252 Cf fission and the subsequent injection of neutrons and gamma rays into the object. The remaining channels receive pulses from the detectors measuring radiation from the object. These detectors record the amount and time of radiation exiting the object. By correlating the radiation events among the source and the other detectors, and among the detectors themselves, a characteristic response of the object to 252 Cf radiation or its own internal radiation is measured. The data acquisition hardware consists of two custom-made boards. The Data Capture and Compression (DCC) board is built around a Gallium Arsine (GaAs) chip designed at ORNL. This chip assigns a time

  1. Adaptable component frameworks

    DEFF Research Database (Denmark)

    Katajainen, Jyrki; Simonsen, Bo

    2009-01-01

    The CPH STL is a special edition of the STL, the containers and algorithms part of the C++ standard library. The specification of the generic components of the STL is given in the C++ standard. Any implementation of the STL, e.g. the one that ships with your standard-compliant C++ compiler, should...... for vector, which is undoubtedly the most used container of the C++ standard library. In particular, we specify the details of a vector implementation that is safe with respect to referential integrity and strong exception safety. Additionally, we report the experiences and lessons learnt from...... the development of component frameworks which we hope to be of benefit to persons engaged in the design and implementation of generic software libraries....

  2. Software engineering in industry

    Science.gov (United States)

    Story, C. M.

    1989-12-01

    Can software be "engineered"? Can a few people with limited resources and a negligible budget produce high quality software solutions to complex software problems? It is possible to resolve the conflict between research activities and the necessity to view software development as a means to an end rather than as an end in itself? The aim of this paper is to encourage further thought and discussion on various topics which, in the author's experience, are becoming increasingly critical in large current software production and development projects, inside and outside high energy physics (HEP). This is done by briefly exploring some of the software engineering ideas and technologies now used in the information industry, using, as a case-study, a project with many similarities to those currently under way in HEP.

  3. Initial Ada components evaluation

    Science.gov (United States)

    Moebes, Travis

    1989-01-01

    The SAIC has the responsibility for independent test and validation of the SSE. They have been using a mathematical functions library package implemented in Ada to test the SSE IV and V process. The library package consists of elementary mathematical functions and is both machine and accuracy independent. The SSE Ada components evaluation includes code complexity metrics based on Halstead's software science metrics and McCabe's measure of cyclomatic complexity. Halstead's metrics are based on the number of operators and operands on a logical unit of code and are compiled from the number of distinct operators, distinct operands, and total number of occurrences of operators and operands. These metrics give an indication of the physical size of a program in terms of operators and operands and are used diagnostically to point to potential problems. McCabe's Cyclomatic Complexity Metrics (CCM) are compiled from flow charts transformed to equivalent directed graphs. The CCM is a measure of the total number of linearly independent paths through the code's control structure. These metrics were computed for the Ada mathematical functions library using Software Automated Verification and Validation (SAVVAS), the SSE IV and V tool. A table with selected results was shown, indicating that most of these routines are of good quality. Thresholds for the Halstead measures indicate poor quality if the length metric exceeds 260 or difficulty is greater than 190. The McCabe CCM indicated a high quality of software products.

  4. Verification and validation process for the safety software in KNICS

    International Nuclear Information System (INIS)

    Kwon, Kee-Choon; Lee, Jang-Soo; Kim, Jang-Yeol

    2004-01-01

    This paper describes the Verification and Validation (V and V ) process for safety software of Programmable Logic Controller (PLC), Digital Reactor Protection System (DRPS), and Engineered Safety Feature-Component Control System (ESF-CCS) that are being developed in Korea Nuclear Instrumentation and Control System (KNICS) projects. Specifically, it presents DRPS V and V experience according to the software development life cycle. The main activities of DRPS V and V process are preparation of software planning documentation, verification of Software Requirement Specification (SRS), Software Design Specification (SDS) and codes, and testing of the integrated software and the integrated system. In addition, they include software safety analysis and software configuration management. SRS V and V of DRPS are technical evaluation, licensing suitability evaluation, inspection and traceability analysis, formal verification, preparing integrated system test plan, software safety analysis, and software configuration management. Also, SDS V and V of RPS are technical evaluation, licensing suitability evaluation, inspection and traceability analysis, formal verification, preparing integrated software test plan, software safety analysis, and software configuration management. The code V and V of DRPS are traceability analysis, source code inspection, test case and test procedure generation, software safety analysis, and software configuration management. Testing is the major V and V activity of software integration and system integration phase. Software safety analysis at SRS phase uses Hazard Operability (HAZOP) method, at SDS phase it uses HAZOP and Fault Tree Analysis (FTA), and at implementation phase it uses FTA. Finally, software configuration management is performed using Nu-SCM (Nuclear Software Configuration Management) tool developed by KNICS project. Through these activities, we believe we can achieve the functionality, performance, reliability and safety that are V

  5. A software product certification model

    NARCIS (Netherlands)

    Heck, P.M.; Klabbers, M.D.; van Eekelen, Marko

    2010-01-01

    Certification of software artifacts offers organizations more certainty and confidence about software. Certification of software helps software sales, acquisition, and can be used to certify legislative compliance or to achieve acceptable deliverables in outsourcing. In this article, we present a

  6. Software verification for nuclear industry

    International Nuclear Information System (INIS)

    Wilburn, N.P.

    1985-08-01

    Why verification of software products throughout the software life cycle is necessary is considered. Concepts of verification, software verification planning, and some verification methodologies for products generated throughout the software life cycle are then discussed

  7. EMMA: a new paradigm in configurable software

    International Nuclear Information System (INIS)

    Nogiec, J. M.; Trombly-Freytag, K.

    2017-01-01

    EMMA is a framework designed to create a family of configurable software systems, with emphasis on extensibility and flexibility. It is based on a loosely coupled, event driven architecture. The EMMA framework has been built upon the premise of composing software systems from independent components. It opens up opportunities for reuse of components and their functionality and composing them together in many different ways. As a result, it provides the developer of test and measurement applications with a lightweight alternative to microservices, while sharing their various advantages, including composability, loose coupling, encapsulation, and reuse.

  8. EMMA: a new paradigm in configurable software

    Science.gov (United States)

    Nogiec, J. M.; Trombly-Freytag, K.

    2017-10-01

    EMMA is a framework designed to create a family of configurable software systems, with emphasis on extensibility and flexibility. It is based on a loosely coupled, event driven architecture. The EMMA framework has been built upon the premise of composing software systems from independent components. It opens up opportunities for reuse of components and their functionality and composing them together in many different ways. It provides the developer of test and measurement applications with a lightweight alternative to microservices, while sharing their various advantages, including composability, loose coupling, encapsulation, and reuse.

  9. Software evolution and maintenance

    CERN Document Server

    Tripathy, Priyadarshi

    2014-01-01

    Software Evolution and Maintenance: A Practitioner's Approach is an accessible textbook for students and professionals, which collates the advances in software development and provides the most current models and techniques in maintenance.Explains two maintenance standards: IEEE/EIA 1219 and ISO/IEC14764Discusses several commercial reverse and domain engineering toolkitsSlides for instructors are available onlineInformation is based on the IEEE SWEBOK (Software Engineering Body of Knowledge)

  10. Software for microcircuit systems

    International Nuclear Information System (INIS)

    Kunz, P.F.

    1978-10-01

    Modern Large Scale Integration (LSI) microcircuits are meant to be programed in order to control the function that they perform. The basics of microprograming and new microcircuits have already been discussed. In this course, the methods of developing software for these microcircuits are explored. This generally requires a package of support software in order to assemble the microprogram, and also some amount of support software to test the microprograms and to test the microprogramed circuit itself. 15 figures, 2 tables

  11. Hospital Management Software Development

    OpenAIRE

    sobogunGod, olawale

    2012-01-01

    The purpose of this thesis was to implement a hospital management software which is suitable for small private hospitals in Nigeria, especially for the ones that use a file based system for storing information rather than having it stored in a more efficient and safer environment like databases or excel programming software. The software developed within this thesis project was specifically designed for the Rainbow specialist hospital which is based in Lagos, the commercial neurological cente...

  12. Computer software configuration management

    International Nuclear Information System (INIS)

    Pelletier, G.

    1987-08-01

    This report reviews the basic elements of software configuration management (SCM) as defined by military and industry standards. Several software configuration management standards are evaluated given the requirements of the nuclear industry. A survey is included of available automated tools for supporting SCM activities. Some information is given on the experience of establishing and using SCM plans of other organizations that manage critical software. The report concludes with recommendations of practices that would be most appropriate for the nuclear power industry in Canada

  13. Gammasphere software development

    International Nuclear Information System (INIS)

    Piercey, R.B.

    1993-01-01

    Activities of the nuclear physics group are described. Progress was made in organizing the Gammasphere Software Working Group, establishing a nuclear computing facility, participating in software development at Lawrence Berkeley, developing a common data file format, and adapting the ORNL UPAK software to run at Gammasphere. A universal histogram object was developed that defines a file format and provides for an objective-oriented programming model. An automated liquid nitrogen fill system was developed for Gammasphere (110 Ge detectors comprise the sphere)

  14. Software quality management

    International Nuclear Information System (INIS)

    Bishop, D.C.; Pymm, P.

    1991-01-01

    As programmable electronic (software-based) systems are increasingly being proposed as design solutions for high integrity applications in nuclear power stations, the need to adopt suitable quality management arrangements is paramount. The authors describe Scottish Nuclear's strategy for software quality management and, using the main on-line monitoring system at Torness Power Station as an example, explain how this strategy is put into practice. Particular attention is given to the topics of software quality planning and change control. (author)

  15. Software Process Improvement Defined

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2002-01-01

    This paper argues in favor of the development of explanatory theory on software process improvement. The last one or two decades commitment to prescriptive approaches in software process improvement theory may contribute to the emergence of a gulf dividing theorists and practitioners....... It is proposed that this divide be met by the development of theory evaluating prescriptive approaches and informing practice with a focus on the software process policymaking and process control aspects of improvement efforts...

  16. Assuring Software Reliability

    Science.gov (United States)

    2014-08-01

    technologies and processes to achieve a required level of confidence that software systems and services function in the intended manner. 1.3 Security Example...that took three high-voltage lines out of service and a software fail- ure (a race condition3) that disabled the computing service that notified the... service had failed. Instead of analyzing the details of the alarm server failure, the reviewers asked why the following software assurance claim had

  17. Software evolution with XVCL

    DEFF Research Database (Denmark)

    Zhang, Weishan; Jarzabek, Stan; Zhang, Hongyu

    2004-01-01

    This chapter introduces software evolution with XVCL (XML-based Variant Configuration Language), which is an XML-based metaprogramming technique. As the software evolves, a large number of variants may arise, especially whtn such kinds of evolutions are related to multiple platforms as shown in our...... case study. Handling variants and tracing the impact of variants across the development lifecycle is a challenge. This chapter shows how we can maintain different versions of software in a reuse-based way....

  18. FASTBUS software status

    International Nuclear Information System (INIS)

    Gustavson, D.B.

    1980-10-01

    Computer software will be needed in addition to the mechanical, electrical, protocol and timing specifications of the FASTBUS, in order to facilitate the use of this flexible new multiprocessor and multisegment data acquisition and processing system. Software considerations have been important in the FASTBUS design, but standard subroutines and recommended algorithms will be needed as the FASTBUS comes into use. This paper summarizes current FASTBUS software projects, goals and status

  19. Software configuration management

    CERN Document Server

    Keyes, Jessica

    2004-01-01

    Software Configuration Management discusses the framework from a standards viewpoint, using the original DoD MIL-STD-973 and EIA-649 standards to describe the elements of configuration management within a software engineering perspective. Divided into two parts, the first section is composed of 14 chapters that explain every facet of configuration management related to software engineering. The second section consists of 25 appendices that contain many valuable real world CM templates.

  20. Solar Asset Management Software

    Energy Technology Data Exchange (ETDEWEB)

    Iverson, Aaron [Ra Power Management, Inc., Oakland, CA (United States); Zviagin, George [Ra Power Management, Inc., Oakland, CA (United States)

    2016-09-30

    Ra Power Management (RPM) has developed a cloud based software platform that manages the financial and operational functions of third party financed solar projects throughout their lifecycle. RPM’s software streamlines and automates the sales, financing, and management of a portfolio of solar assets. The software helps solar developers automate the most difficult aspects of asset management, leading to increased transparency, efficiency, and reduction in human error. More importantly, our platform will help developers save money by improving their operating margins.

  1. Essential software architecture

    CERN Document Server

    Gorton, Ian

    2011-01-01

    Job titles like ""Technical Architect"" and ""Chief Architect"" nowadays abound in software industry, yet many people suspect that ""architecture"" is one of the most overused and least understood terms in professional software development. Gorton's book tries to resolve this dilemma. It concisely describes the essential elements of knowledge and key skills required to be a software architect. The explanations encompass the essentials of architecture thinking, practices, and supporting technologies. They range from a general understanding of structure and quality attributes through technical i

  2. Software engineering the current practice

    CERN Document Server

    Rajlich, Vaclav

    2011-01-01

    INTRODUCTION History of Software EngineeringSoftware PropertiesOrigins of SoftwareBirth of Software EngineeringThird Paradigm: Iterative ApproachSoftware Life Span ModelsStaged ModelVariants of Staged ModelSoftware Technologies Programming Languages and CompilersObject-Oriented TechnologyVersion Control SystemSoftware ModelsClass DiagramsUML Activity DiagramsClass Dependency Graphs and ContractsSOFTWARE CHANGEIntroduction to Software ChangeCharacteristics of Software ChangePhases of Software ChangeRequirements and Their ElicitationRequirements Analysis and Change InitiationConcepts and Concept

  3. Precise Documentation: The Key to Better Software

    Science.gov (United States)

    Parnas, David Lorge

    The prime cause of the sorry “state of the art” in software development is our failure to produce good design documentation. Poor documentation is the cause of many errors and reduces efficiency in every phase of a software product's development and use. Most software developers believe that “documentation” refers to a collection of wordy, unstructured, introductory descriptions, thousands of pages that nobody wanted to write and nobody trusts. In contrast, Engineers in more traditional disciplines think of precise blueprints, circuit diagrams, and mathematical specifications of component properties. Software developers do not know how to produce precise documents for software. Software developments also think that documentation is something written after the software has been developed. In other fields of Engineering much of the documentation is written before and during the development. It represents forethought not afterthought. Among the benefits of better documentation would be: easier reuse of old designs, better communication about requirements, more useful design reviews, easier integration of separately written modules, more effective code inspection, more effective testing, and more efficient corrections and improvements. This paper explains how to produce and use precise software documentation and illustrate the methods with several examples.

  4. Software Performs Complex Design Analysis

    Science.gov (United States)

    2008-01-01

    Designers use computational fluid dynamics (CFD) to gain greater understanding of the fluid flow phenomena involved in components being designed. They also use finite element analysis (FEA) as a tool to help gain greater understanding of the structural response of components to loads, stresses and strains, and the prediction of failure modes. Automated CFD and FEA engineering design has centered on shape optimization, which has been hindered by two major problems: 1) inadequate shape parameterization algorithms, and 2) inadequate algorithms for CFD and FEA grid modification. Working with software engineers at Stennis Space Center, a NASA commercial partner, Optimal Solutions Software LLC, was able to utilize its revolutionary, one-of-a-kind arbitrary shape deformation (ASD) capability-a major advancement in solving these two aforementioned problems-to optimize the shapes of complex pipe components that transport highly sensitive fluids. The ASD technology solves the problem of inadequate shape parameterization algorithms by allowing the CFD designers to freely create their own shape parameters, therefore eliminating the restriction of only being able to use the computer-aided design (CAD) parameters. The problem of inadequate algorithms for CFD grid modification is solved by the fact that the new software performs a smooth volumetric deformation. This eliminates the extremely costly process of having to remesh the grid for every shape change desired. The program can perform a design change in a markedly reduced amount of time, a process that would traditionally involve the designer returning to the CAD model to reshape and then remesh the shapes, something that has been known to take hours, days-even weeks or months-depending upon the size of the model.

  5. Agile software development

    CERN Document Server

    Dingsoyr, Torgeir; Moe, Nils Brede

    2010-01-01

    Agile software development has become an umbrella term for a number of changes in how software developers plan and coordinate their work, how they communicate with customers and external stakeholders, and how software development is organized in small, medium, and large companies, from the telecom and healthcare sectors to games and interactive media. Still, after a decade of research, agile software development is the source of continued debate due to its multifaceted nature and insufficient synthesis of research results. Dingsoyr, Dyba, and Moe now present a comprehensive snapshot of the kno

  6. Optimization of Antivirus Software

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available The paper describes the main techniques used in development of computer antivirus software applications. For this particular category of software, are identified and defined optimum criteria that helps determine which solution is better and what are the objectives of the optimization process. From the general viewpoint of software optimization are presented methods and techniques that are applied at code development level. Regarding the particularities of antivirus software, the paper analyzes some of the optimization concepts applied to this category of applications

  7. Dtest Testing Software

    Science.gov (United States)

    Jain, Abhinandan; Cameron, Jonathan M.; Myint, Steven

    2013-01-01

    This software runs a suite of arbitrary software tests spanning various software languages and types of tests (unit level, system level, or file comparison tests). The dtest utility can be set to automate periodic testing of large suites of software, as well as running individual tests. It supports distributing multiple tests over multiple CPU cores, if available. The dtest tool is a utility program (written in Python) that scans through a directory (and its subdirectories) and finds all directories that match a certain pattern and then executes any tests in that directory as described in simple configuration files.

  8. Software quality assurance

    CERN Document Server

    Laporte, Claude Y

    2018-01-01

    This book introduces Software Quality Assurance (SQA) and provides an overview of standards used to implement SQA. It defines ways to assess the effectiveness of how one approaches software quality across key industry sectors such as telecommunications, transport, defense, and aerospace. * Includes supplementary website with an instructor's guide and solutions * Applies IEEE software standards as well as the Capability Maturity Model Integration for Development (CMMI) * Illustrates the application of software quality assurance practices through the use of practical examples, quotes from experts, and tips from the authors

  9. Software as quality product

    International Nuclear Information System (INIS)

    Enders, A.

    1975-01-01

    In many discussions on the reliability of computer systems, software is presented as the weak link in the chain. The contribution attempts to identify the reasons for this situation as seen from the software development. The concepts correctness and reliability of programmes are explained as they are understood in the specialist discussion of today. Measures and methods are discussed which are particularly relevant as far as the obtaining of fault-free and reliable programmes is concerned. Conclusions are drawn for the user of software so that he is in the position to judge himself what can be justly expected frm the product software compared to other products. (orig./LH) [de

  10. Essence: Facilitating Software Innovation

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2008-01-01

      This paper suggests ways to facilitate creativity and innovation in software development. The paper applies four perspectives – Product, Project, Process, and People –to identify an outlook for software innovation. The paper then describes a new facility–Software Innovation Research Lab (SIRL......) – and a new method concept for software innovation – Essence – based on views, modes, and team roles. Finally, the paper reports from an early experiment using SIRL and Essence and identifies further research....

  11. Global Software Engineering

    DEFF Research Database (Denmark)

    Ebert, Christof; Kuhrmann, Marco; Prikladnicki, Rafael

    2016-01-01

    Professional software products and IT systems and services today are developed mostly by globally distributed teams, projects, and companies. Successfully orchestrating Global Software Engineering (GSE) has become the major success factor both for organizations and practitioners. Yet, more than...... and experience reported at the IEEE International Conference on Software Engineering (ICGSE) series. The outcomes of our analysis show GSE as a field highly attached to industry and, thus, a considerable share of ICGSE papers address the transfer of Software Engineering concepts and solutions to the global stage...

  12. Software Intensive Systems

    National Research Council Canada - National Science Library

    Horvitz, E; Katz, D. J; Rumpf, R. L; Shrobe, H; Smith, T. B; Webber, G. E; Williamson, W. E; Winston, P. H; Wolbarsht, James L

    2006-01-01

    .... Additionally, recommend that DoN invest in software engineering, particularly as it complements commercial industry developments and promotes the application of systems engineering methodology...

  13. Contractor Software Charges

    National Research Council Canada - National Science Library

    Granetto, Paul

    1994-01-01

    .... Examples of computer software costs that contractors charge through indirect rates are material management systems, security systems, labor accounting systems, and computer-aided design and manufacturing...

  14. Decentralized Software Architecture

    National Research Council Canada - National Science Library

    Khare, Rohit

    2002-01-01

    .... While the term "decentralization" is familiar from political and economic contexts, it has been applied extensively, if indiscriminately, to describe recent trends in software architecture towards...

  15. Qualification of software and hardware

    International Nuclear Information System (INIS)

    Gossner, S.; Schueller, H.; Gloee, G.

    1987-01-01

    The qualification of on-line process control equipment is subdivided into three areas: 1) materials and structural elements; 2) on-line process-control components and devices; 3) electrical systems (reactor protection and confinement system). Microprocessor-aided process-control equipment are difficult to verify for failure-free function owing to the complexity of the functional structures of the hardware and to the variety of the software feasible for microprocessors. Hence, qualification will make great demands on the inspecting expert. (DG) [de

  16. Social software in global software development

    DEFF Research Database (Denmark)

    Giuffrida, Rosalba; Dittrich, Yvonne

    2010-01-01

    variety of tools such as: instant messaging, internet forums, mailing lists, blogs, wikis, social network sites, social bookmarking, social libraries, virtual worlds. Though normally rather belonging to the private realm, the use of social software in corporate context has been reported, e.g. as a way...

  17. GOATS - Orbitology Component

    Science.gov (United States)

    Haber, Benjamin M.; Green, Joseph J.

    2010-01-01

    The GOATS Orbitology Component software was developed to specifically address the concerns presented by orbit analysis tools that are often written as stand-alone applications. These applications do not easily interface with standard JPL first-principles analysis tools, and have a steep learning curve due to their complicated nature. This toolset is written as a series of MATLAB functions, allowing seamless integration into existing JPL optical systems engineering modeling and analysis modules. The functions are completely open, and allow for advanced users to delve into and modify the underlying physics being modeled. Additionally, this software module fills an analysis gap, allowing for quick, high-level mission analysis trades without the need for detailed and complicated orbit analysis using commercial stand-alone tools. This software consists of a series of MATLAB functions to provide for geometric orbit-related analysis. This includes propagation of orbits to varying levels of generalization. In the simplest case, geosynchronous orbits can be modeled by specifying a subset of three orbit elements. The next case is a circular orbit, which can be specified by a subset of four orbit elements. The most general case is an arbitrary elliptical orbit specified by all six orbit elements. These orbits are all solved geometrically, under the basic problem of an object in circular (or elliptical) orbit around a rotating spheroid. The orbit functions output time series ground tracks, which serve as the basis for more detailed orbit analysis. This software module also includes functions to track the positions of the Sun, Moon, and arbitrary celestial bodies specified by right ascension and declination. Also included are functions to calculate line-of-sight geometries to ground-based targets, angular rotations and decompositions, and other line-of-site calculations. The toolset allows for the rapid execution of orbit trade studies at the level of detail required for the

  18. NASA's Software Safety Standard

    Science.gov (United States)

    Ramsay, Christopher M.

    2007-01-01

    NASA relies more and more on software to control, monitor, and verify its safety critical systems, facilities and operations. Since the 1960's there has hardly been a spacecraft launched that does not have a computer on board that will provide command and control services. There have been recent incidents where software has played a role in high-profile mission failures and hazardous incidents. For example, the Mars Orbiter, Mars Polar Lander, the DART (Demonstration of Autonomous Rendezvous Technology), and MER (Mars Exploration Rover) Spirit anomalies were all caused or contributed to by software. The Mission Control Centers for the Shuttle, ISS, and unmanned programs are highly dependant on software for data displays, analysis, and mission planning. Despite this growing dependence on software control and monitoring, there has been little to no consistent application of software safety practices and methodology to NASA's projects with safety critical software. Meanwhile, academia and private industry have been stepping forward with procedures and standards for safety critical systems and software, for example Dr. Nancy Leveson's book Safeware: System Safety and Computers. The NASA Software Safety Standard, originally published in 1997, was widely ignored due to its complexity and poor organization. It also focused on concepts rather than definite procedural requirements organized around a software project lifecycle. Led by NASA Headquarters Office of Safety and Mission Assurance, the NASA Software Safety Standard has recently undergone a significant update. This new standard provides the procedures and guidelines for evaluating a project for safety criticality and then lays out the minimum project lifecycle requirements to assure the software is created, operated, and maintained in the safest possible manner. This update of the standard clearly delineates the minimum set of software safety requirements for a project without detailing the implementation for those

  19. SOFA 2 Component Framework and Its Ecosystem

    Czech Academy of Sciences Publication Activity Database

    Malohlava, M.; Hnětynka, P.; Bureš, Tomáš

    2013-01-01

    Roč. 295, 9 May (2013), s. 101-106 ISSN 1571-0661. [FESCA 2012. International Workshop on Formal Engineering approaches to Software Components and Architectures /9./. Tallinn, 31.03.2012] R&D Projects: GA ČR GD201/09/H057 Grant - others:GA AV ČR(CZ) GAP202/11/0312; UK(CZ) SVV-2012-265312 Keywords : CBSE * component system * component model * component * sofa * ecosystem * development tool Subject RIV: JC - Computer Hardware ; Software

  20. Customer Interaction in Software Development: A Comparison of Software Methodologies Deployed in Namibian Software Firms

    CSIR Research Space (South Africa)

    Iyawa, GE

    2016-01-01

    Full Text Available within the Namibian context. An implication for software project managers and software developers is that customer interaction should be properly managed to ensure that the software methodologies for improving software development processes...

  1. A Framework for Seamless Interoperation of Heterogeneous Distributed Software Components

    Science.gov (United States)

    2005-05-01

    have access control policy This paper proposes that access control patterns (in that is defined by privacy and confidentiality legislation the form of...2003, Prentice Hall, Upper Saddle River, New Jersey 07458 [5] Dhbingra, V., "Business-to-Business Ecommerce ," http://proiects.bus.lsu.edu/independent

  2. Genesis: A Framework for Achieving Software Component Diversity

    Science.gov (United States)

    2007-01-01

    correctly—the initial filters develop to fix the Hotmail vulnerability could be circumvented by using alternate character encodings4. Hence, we focus on...Remotely Exploitable Cross-Site Scripting in Hotmail and Yahoo, (March 2004); http://www.greymagic.com/security/advisories/gm005-mc/. 4...EyeonSecurity, Microsoft Passport Account Hijack Attack: Hacking Hotmail and More, Hacker’s Digest. 5. Y.-W. Huang et al., Web Application Security Assessment by

  3. Reconfigurable Computing for Embedded Systems, FPGA Devices and Software Components

    National Research Council Canada - National Science Library

    Bardouleau, Graham; Kulp, James

    2005-01-01

    In recent years the size and capabilities of field-programmable gate array (FPGA) devices have increased to a point where they can be deployed as adjunct processing elements within a multicomputer environment...

  4. Marketing Mix del Software.

    Directory of Open Access Journals (Sweden)

    Yudith del Carmen Rodríguez Pérez

    2006-03-01

    Por ello, en este trabajo se define el concepto de producto software, se caracteriza al mismo y se exponen sus atributos de calidad. Además, se aborda la mezcla de marketing del software necesaria y diferente a la de otros productos para que este triunfe en el mercado.

  5. Sustainability in Software Engineering

    NARCIS (Netherlands)

    Wolfram, N.J.E.; Lago, P.; Osborne, Francesco

    2017-01-01

    The intersection between software engineering research and issues related to sustainability and green IT has been the subject of increasing attention. In spite of that, we observe that sustainability is still not clearly defined, or understood, in the field of software engineering. This lack of

  6. Software cost estimation

    NARCIS (Netherlands)

    Heemstra, F.J.

    1992-01-01

    The paper gives an overview of the state of the art of software cost estimation (SCE). The main questions to be answered in the paper are: (1) What are the reasons for overruns of budgets and planned durations? (2) What are the prerequisites for estimating? (3) How can software development effort be

  7. Software cost estimation

    NARCIS (Netherlands)

    Heemstra, F.J.; Heemstra, F.J.

    1993-01-01

    The paper gives an overview of the state of the art of software cost estimation (SCE). The main questions to be answered in the paper are: (1) What are the reasons for overruns of budgets and planned durations? (2) What are the prerequisites for estimating? (3) How can software development effort be

  8. Software engineering ethics

    Science.gov (United States)

    Bown, Rodney L.

    1991-01-01

    Software engineering ethics is reviewed. The following subject areas are covered: lack of a system viewpoint; arrogance of PC DOS software vendors; violation od upward compatibility; internet worm; internet worm revisited; student cheating and company hiring interviews; computing practitioners and the commodity market; new projects and old programming languages; schedule and budget; and recent public domain comments.

  9. Computer Software Reviews.

    Science.gov (United States)

    Hawaii State Dept. of Education, Honolulu. Office of Instructional Services.

    Intended to provide guidance in the selection of the best computer software available to support instruction and to make optimal use of schools' financial resources, this publication provides a listing of computer software programs that have been evaluated according to their currency, relevance, and value to Hawaii's educational programs. The…

  10. Software product family evaluation

    NARCIS (Netherlands)

    van der Linden, F; Bosch, J; Kamsties, E; Kansala, K; Krzanik, L; Obbink, H; VanDerLinden, F

    2004-01-01

    This paper proposes a 4-dimensional software product family engineering evaluation model. The 4 dimensions relate to the software engineering concerns of business, architecture, organisation and process. The evaluation model is meant to be used within organisations to determine the status of their

  11. Selecting the Right Software.

    Science.gov (United States)

    Shearn, Joseph

    1987-01-01

    Selection of administrative software requires analyzing present needs and, to meet future needs, choosing software that will function with a more powerful computer system. Other important factors to include are a professional system demonstration, maintenance and training, and financial considerations that allow leasing or renting alternatives.…

  12. Trends in software testing

    CERN Document Server

    Mohanty, J; Balakrishnan, Arunkumar

    2017-01-01

    This book is focused on the advancements in the field of software testing and the innovative practices that the industry is adopting. Considering the widely varied nature of software testing, the book addresses contemporary aspects that are important for both academia and industry. There are dedicated chapters on seamless high-efficiency frameworks, automation on regression testing, software by search, and system evolution management. There are a host of mathematical models that are promising for software quality improvement by model-based testing. There are three chapters addressing this concern. Students and researchers in particular will find these chapters useful for their mathematical strength and rigor. Other topics covered include uncertainty in testing, software security testing, testing as a service, test technical debt (or test debt), disruption caused by digital advancement (social media, cloud computing, mobile application and data analytics), and challenges and benefits of outsourcing. The book w...

  13. Revisiting software ecosystems research

    DEFF Research Database (Denmark)

    Manikas, Konstantinos

    2016-01-01

    Software ecosystems’ is argued to first appear as a concept more than 10 years ago and software ecosystem research started to take off in 2010. We conduct a systematic literature study, based on the most extensive literature review in the field up to date, with two primarily aims: (a) to provide...... an updated overview of the field and (b) to document evolution in the field. In total, we analyze 231 papers from 2007 until 2014 and provide an overview of the research in software ecosystems. Our analysis reveals a field that is rapidly growing both in volume and empirical focus while becoming more mature...... from evolving. We propose means for future research and the community to address them. Finally, our analysis shapes the view of the field having evolved outside the existing definitions of software ecosystems and thus propose the update of the definition of software ecosystems....

  14. Software safety hazard analysis

    International Nuclear Information System (INIS)

    Lawrence, J.D.

    1996-02-01

    Techniques for analyzing the safety and reliability of analog-based electronic protection systems that serve to mitigate hazards in process control systems have been developed over many years, and are reasonably well understood. An example is the protection system in a nuclear power plant. The extension of these techniques to systems which include digital computers is not well developed, and there is little consensus among software engineering experts and safety experts on how to analyze such systems. One possible technique is to extend hazard analysis to include digital computer-based systems. Software is frequently overlooked during system hazard analyses, but this is unacceptable when the software is in control of a potentially hazardous operation. In such cases, hazard analysis should be extended to fully cover the software. A method for performing software hazard analysis is proposed in this paper

  15. Systematic Software Development

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Méndez Fernández, Daniel

    2015-01-01

    The speed of innovation and the global allocation of resources to accelerate development or to reduce cost put pressure on the software industry. In the global competition, especially so-called high-price countries have to present arguments why the higher development cost is justified and what...... makes these countries an attractive host for software companies. Often, high-quality engineering and excellent quality of products, e.g., machinery and equipment, are mentioned. Yet, the question is: Can such arguments be also found for the software industry? We aim at investigating the degree...... of professionalism and systematization of software development to draw a map of strengths and weaknesses. To this end, we conducted as a first step an exploratory survey in Germany, presented in this paper. In this survey, we focused on the perceived importance of the two general software engineering process areas...

  16. Software architecture evolution

    DEFF Research Database (Denmark)

    Barais, Olivier; Le Meur, Anne-Francoise; Duchien, Laurence

    2008-01-01

    Software architectures must frequently evolve to cope with changing requirements, and this evolution often implies integrating new concerns. Unfortunately, when the new concerns are crosscutting, existing architecture description languages provide little or no support for this kind of evolution....... The software architect must modify multiple elements of the architecture manually, which risks introducing inconsistencies. This chapter provides an overview, comparison and detailed treatment of the various state-of-the-art approaches to describing and evolving software architectures. Furthermore, we discuss...... one particular framework named Tran SAT, which addresses the above problems of software architecture evolution. Tran SAT provides a new element in the software architecture descriptions language, called an architectural aspect, for describing new concerns and their integration into an existing...

  17. Software quality in 1997

    Energy Technology Data Exchange (ETDEWEB)

    Jones, C. [Software Productivity Research, Inc., Burlington, MA (United States)

    1997-11-01

    For many years, software quality assurance lagged behind hardware quality assurance in terms of methods, metrics, and successful results. New approaches such as Quality Function Deployment (QFD) the ISO 9000-9004 standards, the SEI maturity levels, and Total Quality Management (TQM) are starting to attract wide attention, and in some cases to bring software quality levels up to a parity with manufacturing quality levels. Since software is on the critical path for many engineered products, and for internal business systems as well, the new approaches are starting to affect global competition and attract widespread international interest. It can be hypothesized that success in mastering software quality will be a key strategy for dominating global software markets in the 21st century.

  18. Developing Software Simulations

    Directory of Open Access Journals (Sweden)

    Tom Hall

    2007-06-01

    Full Text Available Programs in education and business often require learners to develop and demonstrate competence in specified areas and then be able to effectively apply this knowledge. One method to aid in developing a skill set in these areas is through the use of software simulations. These simulations can be used for learner demonstrations of competencies in a specified course as well as a review of the basic skills at the beginning of subsequent courses. The first section of this paper discusses ToolBook, the software used to develop our software simulations. The second section discusses the process of developing software simulations. The third part discusses how we have used software simulations to assess student knowledge of research design by providing simulations that allow the student to practice using SPSS and Excel.

  19. Software licenses: Stay honest!

    CERN Multimedia

    Computer Security Team

    2012-01-01

    Do you recall our article about copyright violation in the last issue of the CERN Bulletin, “Music, videos and the risk for CERN”? Now let’s be more precise. “Violating copyright” not only means the illegal download of music and videos, it also applies to software packages and applications.   Users must respect proprietary rights in compliance with the CERN Computing Rules (OC5). Not having legitimately obtained a program or the required licenses to run that software is not a minor offense. It violates CERN rules and puts the Organization at risk! Vendors deserve credit and compensation. Therefore, make sure that you have the right to use their software. In other words, you have bought the software via legitimate channels and use a valid and honestly obtained license. This also applies to “Shareware” and software under open licenses, which might also come with a cost. Usually, only “Freeware” is complete...

  20. Software for virtual accelerator designing

    International Nuclear Information System (INIS)

    Kulabukhova, N.; Ivanov, A.; Korkhov, V.; Lazarev, A.

    2012-01-01

    The article discusses appropriate technologies for software implementation of the Virtual Accelerator. The Virtual Accelerator is considered as a set of services and tools enabling transparent execution of computational software for modeling beam dynamics in accelerators on distributed computing resources. Distributed storage and information processing facilities utilized by the Virtual Accelerator make use of the Service-Oriented Architecture (SOA) according to a cloud computing paradigm. Control system tool-kits (such as EPICS, TANGO), computing modules (including high-performance computing), realization of the GUI with existing frameworks and visualization of the data are discussed in the paper. The presented research consists of software analysis for realization of interaction between all levels of the Virtual Accelerator and some samples of middle-ware implementation. A set of the servers and clusters at St.-Petersburg State University form the infrastructure of the computing environment for Virtual Accelerator design. Usage of component-oriented technology for realization of Virtual Accelerator levels interaction is proposed. The article concludes with an overview and substantiation of a choice of technologies that will be used for design and implementation of the Virtual Accelerator. (authors)

  1. Simple solution to the medical instrumentation software problem

    Science.gov (United States)

    Leif, Robert C.; Leif, Suzanne B.; Leif, Stephanie H.; Bingue, E.

    1995-04-01

    Medical devices now include a substantial software component, which is both difficult and expensive to produce and maintain. Medical software must be developed according to `Good Manufacturing Practices', GMP. Good Manufacturing Practices as specified by the FDA and ISO requires the definition and compliance to a software processes which ensures quality products by specifying a detailed method of software construction. The software process should be based on accepted standards. US Department of Defense software standards and technology can both facilitate the development and improve the quality of medical systems. We describe the advantages of employing Mil-Std-498, Software Development and Documentation, and the Ada programming language. Ada provides the very broad range of functionalities, from embedded real-time to management information systems required by many medical devices. It also includes advanced facilities for object oriented programming and software engineering.

  2. Advanced software development workstation project: Engineering scripting language. Graphical editor

    Science.gov (United States)

    1992-01-01

    Software development is widely considered to be a bottleneck in the development of complex systems, both in terms of development and in terms of maintenance of deployed systems. Cost of software development and maintenance can also be very high. One approach to reducing costs and relieving this bottleneck is increasing the reuse of software designs and software components. A method for achieving such reuse is a software parts composition system. Such a system consists of a language for modeling software parts and their interfaces, a catalog of existing parts, an editor for combining parts, and a code generator that takes a specification and generates code for that application in the target language. The Advanced Software Development Workstation is intended to be an expert system shell designed to provide the capabilities of a software part composition system.

  3. RT-Syn: A real-time software system generator

    Science.gov (United States)

    Setliff, Dorothy E.

    1992-01-01

    This paper presents research into providing highly reusable and maintainable components by using automatic software synthesis techniques. This proposal uses domain knowledge combined with automatic software synthesis techniques to engineer large-scale mission-critical real-time software. The hypothesis centers on a software synthesis architecture that specifically incorporates application-specific (in this case real-time) knowledge. This architecture synthesizes complex system software to meet a behavioral specification and external interaction design constraints. Some examples of these external constraints are communication protocols, precisions, timing, and space limitations. The incorporation of application-specific knowledge facilitates the generation of mathematical software metrics which are used to narrow the design space, thereby making software synthesis tractable. Success has the potential to dramatically reduce mission-critical system life-cycle costs not only by reducing development time, but more importantly facilitating maintenance, modifications, and extensions of complex mission-critical software systems, which are currently dominating life cycle costs.

  4. A Role-Playing Game for a Software Engineering Lab: Developing a Product Line

    Science.gov (United States)

    Zuppiroli, Sara; Ciancarini, Paolo; Gabbrielli, Maurizio

    2012-01-01

    Software product line development refers to software engineering practices and techniques for creating families of similar software systems from a basic set of reusable components, called shared assets. Teaching how to deal with software product lines in a university lab course is a challenging task, because there are several practical issues that…

  5. A flexible modelling software for data acquisition

    International Nuclear Information System (INIS)

    Shu Yantai; Chen Yanhui; Yang Songqi; Liu Genchen

    1992-03-01

    A flexible modelling software for data acquisition is based on an event-driven simulator. It can be used to simulate a wide variety of systems which can be modelled as open queuing networks. The main feature of the software is its flexibility to evaluate the performance of various data acquisition system, whether pulsed or not. The flexible features of this software as follow: The user can choose the number of processors in the model and the route which every job takes to move the model. the service rate of a processor is automatically adapted. The simulator has a pipe-line mechanism. A job can be divided into several segments and a processor may be used as a compression component etc. Some modelling techniques and applications of this software in plasma physics laboratories are also presented

  6. The ATLAS Data Management Software Engineering Process

    CERN Document Server

    Lassnig, M; The ATLAS collaboration; Stewart, G A; Barisits, M; Beermann, T; Vigne, R; Serfon, C; Goossens, L; Nairz, A; Molfetas, A

    2014-01-01

    Rucio is the next-generation data management system of the ATLAS experiment. The software engineering process to develop Rucio is fundamentally different to existing software development approaches in the ATLAS distributed computing community. Based on a conceptual design document, development takes place using peer-reviewed code in a test-driven environment. The main objectives are to ensure that every engineer understands the details of the full project, even components usually not touched by them, that the design and architecture are coherent, that temporary contributors can be productive without delay, that programming mistakes are prevented before being committed to the source code, and that the source is always in a fully functioning state. This contribution will illustrate the workflows and products used, and demonstrate the typical development cycle of a component from inception to deployment within this software engineering process. Next to the technological advantages, this contribution will also hi...

  7. The ATLAS Data Management Software Engineering Process

    CERN Document Server

    Lassnig, M; The ATLAS collaboration; Stewart, G A; Barisits, M; Beermann, T; Vigne, R; Serfon, C; Goossens, L; Nairz, A

    2013-01-01

    Rucio is the next-generation data management system of the ATLAS experiment. The software engineering process to develop Rucio is fundamentally different to existing software development approaches in the ATLAS distributed computing community. Based on a conceptual design document, development takes place using peer-reviewed code in a test-driven environment. The main objectives are to ensure that every engineer understands the details of the full project, even components usually not touched by them, that the design and architecture are coherent, that temporary contributors can be productive without delay, that programming mistakes are prevented before being committed to the source code, and that the source is always in a fully functioning state. This contribution will illustrate the workflows and products used, and demonstrate the typical development cycle of a component from inception to deployment within this software engineering process. Next to the technological advantages, this contribution will also hi...

  8. Model Driven Software Development for Agricultural Robotics

    DEFF Research Database (Denmark)

    Larsen, Morten

    The design and development of agricultural robots, consists of both mechan- ical, electrical and software components. All these components must be de- signed and combined such that the overall goal of the robot is fulfilled. The design and development of these systems require collaboration between...... processing, control engineering, etc. This thesis proposes a Model-Driven Software Develop- ment based approach to model, analyse and partially generate the software implementation of a agricultural robot. Furthermore, Guidelines for mod- elling the architecture of an agricultural robots are provided......, assisting with bridging the different engineering disciplines. Timing play an important role in agricultural robotic applications, synchronisation of robot movement and implement actions is important in order to achieve precision spraying, me- chanical weeding, individual feeding, etc. Discovering...

  9. Towards an Ontology of Software

    OpenAIRE

    Wang, Xiaowei

    2016-01-01

    Software is permeating every aspect of our personal and social life. And yet, the cluster of concepts around the notion of software, such as the notions of a software product, software requirements, software specifications, are still poorly understood with no consensus on the horizon. For many, software is just code, something intangible best defined in contrast with hardware, but it is not particularly illuminating. This erroneous notion, software is just code, presents both in the ontology ...

  10. LDUA software custodian's notebook

    International Nuclear Information System (INIS)

    Aftanas, B.L.

    1998-01-01

    This plan describes the activities to be performed and controls to be applied to the process of specifying, obtaining, and qualifying the control and data acquisition software for the Light Duty Utility Arm (LDUA) System. It serves the purpose of a software quality assurance plan, a verification and validation plan, and a configuration management plan. This plan applies to all software that is an integral part of the LDUA control and data acquisition system, that is, software that is installed in the computers that are part of the LDUA system as it is deployed in the field. This plan applies to the entire development process, including: requirements; design; implementation; and operations and maintenance. This plan does not apply to any software that is not integral with the LDUA system. This plan has-been prepared in accordance with WHC-CM-6-1 Engineering Practices, EP-2.1; WHC-CM-3-10 Software Practices; and WHC-CM-4-2, QR 19.0, Software Quality Assurance Requirements

  11. Software Formal Inspections Guidebook

    Science.gov (United States)

    1993-01-01

    The Software Formal Inspections Guidebook is designed to support the inspection process of software developed by and for NASA. This document provides information on how to implement a recommended and proven method for conducting formal inspections of NASA software. This Guidebook is a companion document to NASA Standard 2202-93, Software Formal Inspections Standard, approved April 1993, which provides the rules, procedures, and specific requirements for conducting software formal inspections. Application of the Formal Inspections Standard is optional to NASA program or project management. In cases where program or project management decide to use the formal inspections method, this Guidebook provides additional information on how to establish and implement the process. The goal of the formal inspections process as documented in the above-mentioned Standard and this Guidebook is to provide a framework and model for an inspection process that will enable the detection and elimination of defects as early as possible in the software life cycle. An ancillary aspect of the formal inspection process incorporates the collection and analysis of inspection data to effect continual improvement in the inspection process and the quality of the software subjected to the process.

  12. The STARLINK software collection

    Science.gov (United States)

    Penny, A. J.; Wallace, P. T.; Sherman, J. C.; Terret, D. L.

    1993-12-01

    A demonstration will be given of some recent Starlink software. STARLINK is: a network of computers used by UK astronomers; a collection of programs for the calibration and analysis of astronomical data; a team of people giving hardware, software and administrative support. The Starlink Project has been in operation since 1980 to provide UK astronomers with interactive image processing and data reduction facilities. There are now Starlink computer systems at 25 UK locations, serving about 1500 registered users. The Starlink software collection now has about 25 major packages covering a wide range of astronomical data reduction and analysis techniques, as well as many smaller programs and utilities. At the core of most of the packages is a common `software environment', which provides many of the functions which applications need and offers standardized methods of structuring and accessing data. The software environment simplifies programming and support, and makes it easy to use different packages for different stages of the data reduction. Users see a consistent style, and can mix applications without hitting problems of differing data formats. The Project group coordinates the writing and distribution of this software collection, which is Unix based. Outside the UK, Starlink is used at a large number of places, which range from installations at major UK telescopes, which are Starlink-compatible and managed like Starlink sites, to individuals who run only small parts of the Starlink software collection.

  13. Klystron control software in the SLC

    International Nuclear Information System (INIS)

    Jobe, R.K.; Thompson, K.; Phinney, N.

    1985-05-01

    Triggering, control, and monitoring of 240 high-power klystrons will be supported by the SLC control system this summer. The control software is distributed among a VAX host computer, a local microprocessor cluster, and a dedicated intelligent CAMAC module. The functions performed by these three components and the algorithms used are discussed

  14. A designerly methodology for software development

    NARCIS (Netherlands)

    Du Bois, E.

    2013-01-01

    This PhD researches the domain of industrial design engineering starting from the strong technological evolutions and changing economic, social and ecological needs. Our current products are not only build from hardware components, but are a complex mix of hardware, software and services (in

  15. Evidence synthesis software.

    Science.gov (United States)

    Park, Sophie Elizabeth; Thomas, James

    2018-06-07

    It can be challenging to decide which evidence synthesis software to choose when doing a systematic review. This article discusses some of the important questions to consider in relation to the chosen method and synthesis approach. Software can support researchers in a range of ways. Here, a range of review conditions and software solutions. For example, facilitating contemporaneous collaboration across time and geographical space; in-built bias assessment tools; and line-by-line coding for qualitative textual analysis. EPPI-Reviewer is a review software for research synthesis managed by the EPPI-centre, UCL Institute of Education. EPPI-Reviewer has text mining automation technologies. Version 5 supports data sharing and re-use across the systematic review community. Open source software will soon be released. EPPI-Centre will continue to offer the software as a cloud-based service. The software is offered via a subscription with a one-month (extendible) trial available and volume discounts for 'site licences'. It is free to use for Cochrane and Campbell reviews. The next EPPI-Reviewer version is being built in collaboration with National Institute for Health and Care Excellence using 'surveillance' of newly published research to support 'living' iterative reviews. This is achieved using a combination of machine learning and traditional information retrieval technologies to identify the type of research each new publication describes and determine its relevance for a particular review, domain or guideline. While the amount of available knowledge and research is constantly increasing, the ways in which software can support the focus and relevance of data identification are also developing fast. Software advances are maximising the opportunities for the production of relevant and timely reviews. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise

  16. Beginning software engineering

    CERN Document Server

    Stephens, Rod

    2015-01-01

    Beginning Software Engineering demystifies the software engineering methodologies and techniques that professional developers use to design and build robust, efficient, and consistently reliable software. Free of jargon and assuming no previous programming, development, or management experience, this accessible guide explains important concepts and techniques that can be applied to any programming language. Each chapter ends with exercises that let you test your understanding and help you elaborate on the chapter's main concepts. Everything you need to understand waterfall, Sashimi, agile, RAD, Scrum, Kanban, Extreme Programming, and many other development models is inside!

  17. Software industrial flexible

    OpenAIRE

    Díaz Araya, Daniel; Muñoz, Leandro; Sirerol, Daniel; Oviedo, Sandra; Ibáñez, Francisco S.

    2012-01-01

    En este trabajo se pretende investigar y proponer técnicas, métodos y tecnologías que permitan el desarrollo de software flexible en ambientes industriales. El objetivo es generar métodos y técnicas para facilitar el desarrollo de software flexible en ambientes industriales. Las áreas de investigación son los sistemas de scheduling de producción, la generación de software para plataformas de hardware abiertas y la innovación.

  18. Thyroid uptake software

    International Nuclear Information System (INIS)

    Alonso, Dolores; Arista, Eduardo

    2003-01-01

    The DETEC-PC software was developed as a complement to a measurement system (hardware) able to perform Iodine Thyroid Uptake studies. The software was designed according to the principles of Object oriented programming using C++ language. The software automatically fixes spectrometric measurement parameters and besides patient measurement also performs statistical analysis of a batch of samples. It possesses a PARADOX database with all information of measured patients and a help system with the system options and medical concepts related to the thyroid uptake study

  19. Criteria for software modularization

    Science.gov (United States)

    Card, David N.; Page, Gerald T.; Mcgarry, Frank E.

    1985-01-01

    A central issue in programming practice involves determining the appropriate size and information content of a software module. This study attempted to determine the effectiveness of two widely used criteria for software modularization, strength and size, in reducing fault rate and development cost. Data from 453 FORTRAN modules developed by professional programmers were analyzed. The results indicated that module strength is a good criterion with respect to fault rate, whereas arbitrary module size limitations inhibit programmer productivity. This analysis is a first step toward defining empirically based standards for software modularization.

  20. Error Free Software

    Science.gov (United States)

    1985-01-01

    A mathematical theory for development of "higher order" software to catch computer mistakes resulted from a Johnson Space Center contract for Apollo spacecraft navigation. Two women who were involved in the project formed Higher Order Software, Inc. to develop and market the system of error analysis and correction. They designed software which is logically error-free, which, in one instance, was found to increase productivity by 600%. USE.IT defines its objectives using AXES -- a user can write in English and the system converts to computer languages. It is employed by several large corporations.

  1. Upgrade Software and Computing

    CERN Document Server

    The LHCb Collaboration, CERN

    2018-01-01

    This document reports the Research and Development activities that are carried out in the software and computing domains in view of the upgrade of the LHCb experiment. The implementation of a full software trigger implies major changes in the core software framework, in the event data model, and in the reconstruction algorithms. The increase of the data volumes for both real and simulated datasets requires a corresponding scaling of the distributed computing infrastructure. An implementation plan in both domains is presented, together with a risk assessment analysis.

  2. Global Software Engineering

    DEFF Research Database (Denmark)

    Ebert, Christof; Kuhrmann, Marco; Prikladnicki, Rafael

    2016-01-01

    SOFTWARE, LIKE ALL industry products, is the result of complex multinational supply chains with many partners from concept to development to production and maintenance. Global software engineering (GSE), IT outsourcing, and business process outsourcing during the past decade have showed growth...... rates of 10 to 20 percent per year. This instalment of Practitioner’s Digest summarizes experiences and guidance from industry to facilitate knowledge and technology transfer for GSE. It’s based on industry feedback from the annual IEEE International Conference on Global Software Engineering, which had...

  3. Software for microcircuit systems

    International Nuclear Information System (INIS)

    Kunz, P.F.

    1978-01-01

    Modern Large Scale Integration (LSI) microcircuits are meant to be programmed in order to control the function that they perform. In the previous paper the author has already discussed the basics of microprogramming and have studied in some detail two types of new microcircuits. In this paper, methods of developing software for these microcircuits are explored. This generally requires a package of support software in order to assemble the microprogram, and also some amount of support software to test the microprograms and to test the microprogrammed circuit itself. (Auth.)

  4. Guide to software export

    CERN Document Server

    Philips, Roger A

    2014-01-01

    An ideal reference source for CEOs, marketing and sales managers, sales consultants, and students of international marketing, Guide to Software Export provides a step-by-step approach to initiating or expanding international software sales. It teaches you how to examine critically your candidate product for exportability; how to find distributors, agents, and resellers abroad; how to identify the best distribution structure for export; and much, much more!Not content with providing just the guidelines for setting up, expanding, and managing your international sales channels, Guide to Software

  5. Software takes command

    CERN Document Server

    Manovich, Lev

    2013-01-01

    Software has replaced a diverse array of physical, mechanical, and electronic technologies used before 21st century to create, store, distribute and interact with cultural artifacts. It has become our interface to the world, to others, to our memory and our imagination - a universal language through which the world speaks, and a universal engine on which the world runs. What electricity and combustion engine were to the early 20th century, software is to the early 21st century. Offering the the first theoretical and historical account of software for media authoring and its effects on the prac

  6. Software quality assurance handbook

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    There are two important reasons for Software Quality Assurance (SQA) at Allied-Signal Inc., Kansas City Division (KCD): First, the benefits from SQA make good business sense. Second, the Department of Energy has requested SQA. This handbook is one of the first steps in a plant-wide implementation of Software Quality Assurance at KCD. The handbook has two main purposes. The first is to provide information that you will need to perform software quality assurance activities. The second is to provide a common thread to unify the approach to SQA at KCD. 2 figs.

  7. Sobre software libre

    OpenAIRE

    Matellán Olivera, Vicente; González Barahona, Jesús; Heras Quirós, Pedro de las; Robles Martínez, Gregorio

    2004-01-01

    220 p. "Sobre software libre" reune casi una treintena de ensayos sobre temas de candente actualidad relacionados con el software libre (del cual Linux es su ex- ponente más conocido). Los ensayos que el lector encontrará están divididos en bloques temáticos que van desde la propiedad intelectual o las cuestiones económicas y sociales de este modelo hasta su uso en la educación y las administraciones publicas, pasando por alguno que repasa la historia del software libre en l...

  8. SOFTWARE IN TOURISM INDUSTRY : A Study On Emerging New Niches Of Software In Hotel Industry

    OpenAIRE

    Regmi, Krishna Kumar; Thapa, Bikesh

    2010-01-01

    This study was structured as a part of Bachelor Degree thesis in Tourism Degree Programme in Laurea University of Applied Sciences. The study examines the role of software as a major component of ICTs (Information and Communication Technologies) in hotel industry in Finland. The study was conducted in three major hotel chains in Finland in order to identify the scope and possibility of developing new software module within the periphery of contemporary Property Management Systems (PMS). Marke...

  9. Review of Software Reliability Assessment Methodologies for Digital I and C Software of Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Jae Hyun; Lee, Seung Jun; Jung, Won Dea [KAERI, Daejeon (Korea, Republic of)

    2014-08-15

    Digital instrumentation and control (I and C) systems are increasingly being applied to current nuclear power plants (NPPs) due to its advantages; zero drift, advanced data calculation capacity, and design flexibility. Accordingly, safety issues of software that is main part of the digital I and C system have been raised. As with hardware components, the software failure in NPPs could lead to a large disaster, therefore failure rate test and reliability assessment of software should be properly performed, and after that adopted in NPPs. However, the reliability assessment of the software is quite different with that of hardware, owing to the nature difference between software and hardware. The one of the most different thing is that the software failures arising from design faults as 'error crystal', whereas the hardware failures are caused by deficiencies in design, production, and maintenance. For this reason, software reliability assessment has been focused on the optimal release time considering the economy. However, the safety goal and public acceptance of the NPPs is so distinctive with other industries that the software in NPPs is dependent on reliability quantitative value rather than economy. The safety goal of NPPs compared to other industries is exceptionally high, so conventional methodologies on software reliability assessment already used in other industries could not adjust to safety goal of NPPs. Thus, the new reliability assessment methodology of the software of digital I and C on NPPs need to be developed. In this paper, existing software reliability assessment methodologies are reviewed to obtain the pros and cons of them, and then to assess the usefulness of each method to software of NPPs.

  10. Review of Software Reliability Assessment Methodologies for Digital I and C Software of Nuclear Power Plants

    International Nuclear Information System (INIS)

    Cho, Jae Hyun; Lee, Seung Jun; Jung, Won Dea

    2014-01-01

    Digital instrumentation and control (I and C) systems are increasingly being applied to current nuclear power plants (NPPs) due to its advantages; zero drift, advanced data calculation capacity, and design flexibility. Accordingly, safety issues of software that is main part of the digital I and C system have been raised. As with hardware components, the software failure in NPPs could lead to a large disaster, therefore failure rate test and reliability assessment of software should be properly performed, and after that adopted in NPPs. However, the reliability assessment of the software is quite different with that of hardware, owing to the nature difference between software and hardware. The one of the most different thing is that the software failures arising from design faults as 'error crystal', whereas the hardware failures are caused by deficiencies in design, production, and maintenance. For this reason, software reliability assessment has been focused on the optimal release time considering the economy. However, the safety goal and public acceptance of the NPPs is so distinctive with other industries that the software in NPPs is dependent on reliability quantitative value rather than economy. The safety goal of NPPs compared to other industries is exceptionally high, so conventional methodologies on software reliability assessment already used in other industries could not adjust to safety goal of NPPs. Thus, the new reliability assessment methodology of the software of digital I and C on NPPs need to be developed. In this paper, existing software reliability assessment methodologies are reviewed to obtain the pros and cons of them, and then to assess the usefulness of each method to software of NPPs

  11. Intellectual Property Protection of Software – At the Crossroads of Software Patents and Open Source Software

    OpenAIRE

    Tantarimäki, Maria

    2018-01-01

    The thesis considers the intellectual property protection of software in Europe and in the US, which is increasingly important subject as the world is globalizing and digitalizing. The special nature of software has challenges the intellectual property rights. The current protection of software is based on copyright protection but in this thesis, two other options are considered: software patents and open source software. Software patents provide strong protection for software whereas the pur...

  12. Center for Adaptive Optics | Software

    Science.gov (United States)

    Optics Software The Center for Adaptive Optics acts as a clearing house for distributing Software to Institutes it gives specialists in Adaptive Optics a place to distribute their software. All software is shared on an "as-is" basis and the users should consult with the software authors with any

  13. A concept of software testing for SMART MMIS software

    International Nuclear Information System (INIS)

    Seo, Yong Seok; Seong, Seung Hwan; Park, Keun Ok; Hur, Sub; Kim, Dong Hoon

    2001-01-01

    In order to achieve high quality of SMART MMIS software, the well-constructed software testing concept shall be required. This paper established software testing concept which is to be applied to SMART MMIS software, in terms of software testing organization, documentation. procedure, and methods. The software testing methods are classified into source code static analysis and dynamic testing. The software dynamic testing methods are discussed with two aspects: white-box and black-box testing. As software testing concept introduced in this paper is applied to the SMART MMIS software. the high quality of the software will be produced. In the future, software failure data will be collected through the construction of SMART MMIS prototyping facility which the software testing concept of this paper is applied to

  14. Computer Center: Software Review.

    Science.gov (United States)

    Duhrkopf, Richard, Ed.; Belshe, John F., Ed.

    1988-01-01

    Reviews a software package, "Mitosis-Meiosis," available for Apple II or IBM computers with colorgraphics capabilities. Describes the documentation, presentation and flexibility of the program. Rates the program based on graphics and usability in a biology classroom. (CW)

  15. Petroleum software profiles

    International Nuclear Information System (INIS)

    Anon.

    1996-01-01

    A profile of twenty-two software packages designed for petroleum exploration and production was provided. Some focussed on the oil and gas engineering industry, and others on mapping systems containing well history files and well data summaries. Still other programs provided accounting systems designed to address the complexities of the oil and gas industry. The software packages reviewed were developed by some of the best-known groups involved in software development for the oil and gas industry, including among others, Geoquest, the Can Tek Group, Applied Terravision Systems Inc., Neotechnology Consultants Ltd., (12) OGCI Software Inc., Oracle Energy, Production Revenue Information Systems Management, Virtual Computing Services Ltd., and geoLogic Systems Ltd

  16. Next Generation Software Development

    National Research Council Canada - National Science Library

    Manna, Zohar

    2005-01-01

    Under this grant we have studied the development of a scientifically sound basis for software development that builds on widely used pragmatic methods but is firmly grounded in well-established formal...

  17. Managing Distributed Software Projects

    DEFF Research Database (Denmark)

    Persson, John Stouby

    Increasingly, software projects are becoming geographically distributed, with limited face-toface interaction between participants. These projects face particular challenges that need careful managerial attention. This PhD study reports on how we can understand and support the management...... of distributed software projects, based on a literature study and a case study. The main emphasis of the literature study was on how to support the management of distributed software projects, but also contributed to an understanding of these projects. The main emphasis of the case study was on how to understand...... the management of distributed software projects, but also contributed to supporting the management of these projects. The literature study integrates what we know about risks and risk-resolution techniques, into a framework for managing risks in distributed contexts. This framework was developed iteratively...

  18. eSoftwareList

    Data.gov (United States)

    US Agency for International Development — USAID Software Database reporting tool created in Oracle Application Express (APEX). This version provides read only access to a database view of the JIRA SAR...

  19. Software didattico: integrazione scolastica

    Directory of Open Access Journals (Sweden)

    Lucia Ferlino

    1996-01-01

    Full Text Available Discussion of the use of educational software for school integration. Requires being aware of its potential effectiveness and know that it also lies in the choice of functional products.

  20. Core Flight Software

    Data.gov (United States)

    National Aeronautics and Space Administration — The AES Core Flight Software (CFS) project purpose is to analyze applicability, and evolve and extend the reusability of the CFS system originally developed by...

  1. Tier2 Submit Software

    Science.gov (United States)

    Download this tool for Windows or Mac, which helps facilities prepare a Tier II electronic chemical inventory report. The data can also be exported into the CAMEOfm (Computer-Aided Management of Emergency Operations) emergency planning software.

  2. SEER Data & Software

    Science.gov (United States)

    Options for accessing datasets for incidence, mortality, county populations, standard populations, expected survival, and SEER-linked and specialized data. Plus variable definitions, documentation for reporting and using datasets, statistical software (SEER*Stat), and observational research resources.

  3. Managing Software Process Evolution

    DEFF Research Database (Denmark)

    This book focuses on the design, development, management, governance and application of evolving software processes that are aligned with changing business objectives, such as expansion to new domains or shifting to global production. In the context of an evolving business world, it examines...... the complete software process lifecycle, from the initial definition of a product to its systematic improvement. In doing so, it addresses difficult problems, such as how to implement processes in highly regulated domains or where to find a suitable notation system for documenting processes, and provides...... essential insights and tips to help readers manage process evolutions. And last but not least, it provides a wealth of examples and cases on how to deal with software evolution in practice. Reflecting these topics, the book is divided into three parts. Part 1 focuses on software business transformation...

  4. Software for nuclear spectrometry

    International Nuclear Information System (INIS)

    1998-10-01

    The Advisory Group Meeting (AGM) on Software for Nuclear Spectrometry was dedicated to review the present status of software for nuclear spectrometry and to advise on future activities in this field. Because similar AGM and consultant's meetings had been held in the past; together with an attempt to get more streamlined, this AGM was devoted to the specific field of software for gamma ray spectrometry. Nevertheless, many of the issues discussed and the recommendations made are of general concern for any software on nuclear spectrometry. The report is organized by sections. The 'Summary' gives conclusions and recommendations adopted at the AGM. These conclusions and recommendations resulted from the discussions held during and after presentations of the scientific and technical papers. These papers are reported here in their integral form in the following Sections

  5. Software for radiation protection

    International Nuclear Information System (INIS)

    Graffunder, H.

    2002-01-01

    The software products presented are universally usable programs for radiation protection. The systems were designed in order to establish a comprehensive database specific to radiation protection and, on this basis, model in programs subjects of radiation protection. Development initially focused on the creation of the database. Each software product was to access the same nuclide-specific data; input errors and differences in spelling were to be excluded from the outset. This makes the products more compatible with each other and able to exchange data among each other. The software products are modular in design. Functions recurring in radiation protection are always treated the same way in different programs, and also represented the same way on the program surface. The recognition effect makes it easy for users to familiarize with the products quickly. All software products are written in German and are tailored to the administrative needs and codes and regulations in Germany and in Switzerland. (orig.) [de

  6. ITSY Handheld Software Radio

    National Research Council Canada - National Science Library

    Bose, Vanu

    2001-01-01

    .... A handheld software radio platform would enable the construction of devices that could inter-operate with multiple legacy systems, download new waveforms and be used to construct adhoc networks...

  7. Error-Free Software

    Science.gov (United States)

    1989-01-01

    001 is an integrated tool suited for automatically developing ultra reliable models, simulations and software systems. Developed and marketed by Hamilton Technologies, Inc. (HTI), it has been applied in engineering, manufacturing, banking and software tools development. The software provides the ability to simplify the complex. A system developed with 001 can be a prototype or fully developed with production quality code. It is free of interface errors, consistent, logically complete and has no data or control flow errors. Systems can be designed, developed and maintained with maximum productivity. Margaret Hamilton, President of Hamilton Technologies, also directed the research and development of USE.IT, an earlier product which was the first computer aided software engineering product in the industry to concentrate on automatically supporting the development of an ultrareliable system throughout its life cycle. Both products originated in NASA technology developed under a Johnson Space Center contract.

  8. MARS software package status

    International Nuclear Information System (INIS)

    Azhgirej, I.L.; Talanov, V.V.

    2000-01-01

    The MARS software package is intended for simulating the nuclear-electromagnetic cascades and the secondary neutrons and muons transport in the heterogeneous medium of arbitrary complexity in the magnetic fields presence. The inclusive approach to describing the particle production in the nuclear and electromagnetic interactions and by the unstable particles decay is realized in the package. The MARS software package was actively applied for solving various radiation physical problems [ru

  9. MAGIC user's group software

    International Nuclear Information System (INIS)

    Warren, G.; Ludeking, L.; McDonald, J.; Nguyen, K.; Goplen, B.

    1990-01-01

    The MAGIC User's Group has been established to facilitate the use of electromagnetic particle-in-cell software by universities, government agencies, and industrial firms. The software consists of a series of independent executables that are capable of inter-communication. MAGIC, SOS, μ SOS are used to perform electromagnetic simulations while POSTER is used to provide post-processing capabilities. Each is described in the paper. Use of the codes for Klystrode simulation is discussed

  10. Global software development

    DEFF Research Database (Denmark)

    Matthiesen, Stina

    2016-01-01

    This overview presents the mid stages of my doctoral research-based on ethnographic work conducted in IT companies in India and in Denmark-on collaborative work within global software development (GSD). In the following I briefly introduce how this research seeks to spark a debate in CSCW...... by challenging contemporary ideals about software development outsourcing through the exploration of the multiplicities and asymmetric dynamics inherent in the collaborative work of GSD....

  11. Principles of Antifragile Software

    OpenAIRE

    Monperrus, Martin

    2014-01-01

    The goal of this paper is to study and define the concept of "antifragile software". For this, I start from Taleb's statement that antifragile systems love errors, and discuss whether traditional software dependability fits into this class. The answer is somewhat negative, although adaptive fault tolerance is antifragile: the system learns something when an error happens, and always imrpoves. Automatic runtime bug fixing is changing the code in response to errors, fault injection in productio...

  12. Software product quality measurement

    OpenAIRE

    Godliauskas, Eimantas

    2016-01-01

    This paper analyses Ruby product quality measures, suggesting three new measures for Ruby product quality measurement tool Rubocop to measure Ruby product quality characteristics defined in ISO 2502n standard series. This paper consists of four main chapters. The first chapter gives a brief view of software product quality and software product quality measurement. The second chapter analyses object oriented quality measures. The third chapter gives a brief view of the most popular Ruby qualit...

  13. Software Engineering Issues for Cyber-Physical Systems

    DEFF Research Database (Denmark)

    Al-Jaroodi, Jameela; Mohamed, Nader; Jawhar, Imad

    2016-01-01

    step; however, designing and implementing the right software to integrate and use them effectively is essential. The software facilitates better interfaces, more control and adds smart services, high flexibility and many other added values and features to the CPS. However, software development for CPS......Cyber-Physical Systems (CPS) provide many smart features for enhancing physical processes. These systems are designed with a set of distributed hardware, software, and network components that are embedded in physical systems and environments or attached to humans. Together they function seamlessly...... to offer specific functionalities or features that help enhance human lives, operations or environments. While different CPS components play important roles in a successful CPS development, the software plays the most important role among them. Acquiring and using high quality CPS components is the first...

  14. Examining software complexity and quality for scientific software

    International Nuclear Information System (INIS)

    Kelly, D.; Shepard, T.

    2005-01-01

    Research has not found a simple relationship between software complexity and software quality, and particularly no relationship between commonly used software complexity metrics and the occurrence of software faults. A study with an example of scientific software from the nuclear power industry illustrates the importance of addressing cognitive complexity, the complexity related to understanding the intellectual content of the software. Simple practices such as aptly-named variables contributes more to high quality software than limiting code sizes. This paper examines the research into complexity and quality and reports on a longitudinal study using the example of nuclear software. (author)

  15. The Effect of AOP on Software Engineering, with Particular Attention to OIF and Event Quantification

    Science.gov (United States)

    Havelund, Klaus; Filman, Robert; Korsmeyer, David (Technical Monitor)

    2003-01-01

    We consider the impact of Aspect-Oriented Programming on Software Engineering, and, in particular, analyze two AOP systems, one of which does component wrapping and the other, quantification over events, for their software engineering effects.

  16. Research and Development on Food Nutrition Statistical Analysis Software System

    OpenAIRE

    Du Li; Ke Yun

    2013-01-01

    Designing and developing a set of food nutrition component statistical analysis software can realize the automation of nutrition calculation, improve the nutrition processional professional’s working efficiency and achieve the informatization of the nutrition propaganda and education. In the software development process, the software engineering method and database technology are used to calculate the human daily nutritional intake and the intelligent system is used to evaluate the user’s hea...

  17. REENGINEERING OF THE AIR SIMULATORS LEGACY SOFTWARE

    Directory of Open Access Journals (Sweden)

    Nikolay O. Sidorov

    2008-02-01

    Full Text Available  There are the technical complexes consisting of components, parts of which are actively used, but the rest has lost working capacity owing to moral and physical deterioration. An example of such a complex is the aviation-flight complex "plane-simulator". High cost of components which continue to be used (plane do the actual task of restoring and supporting the out-of-order components (simulator. The considerable part of such complexes is the software, which owing to replacement of the obsolete and physically worn out hardware requires the rework. The rework method is reengineering.

  18. Automating risk analysis of software design models.

    Science.gov (United States)

    Frydman, Maxime; Ruiz, Guifré; Heymann, Elisa; César, Eduardo; Miller, Barton P

    2014-01-01

    The growth of the internet and networked systems has exposed software to an increased amount of security threats. One of the responses from software developers to these threats is the introduction of security activities in the software development lifecycle. This paper describes an approach to reduce the need for costly human expertise to perform risk analysis in software, which is common in secure development methodologies, by automating threat modeling. Reducing the dependency on security experts aims at reducing the cost of secure development by allowing non-security-aware developers to apply secure development with little to no additional cost, making secure development more accessible. To automate threat modeling two data structures are introduced, identification trees and mitigation trees, to identify threats in software designs and advise mitigation techniques, while taking into account specification requirements and cost concerns. These are the components of our model for automated threat modeling, AutSEC. We validated AutSEC by implementing it in a tool based on data flow diagrams, from the Microsoft security development methodology, and applying it to VOMS, a grid middleware component, to evaluate our model's performance.

  19. Computing and software

    Directory of Open Access Journals (Sweden)

    White, G. C.

    2004-06-01

    Full Text Available The reality is that the statistical methods used for analysis of data depend upon the availability of software. Analysis of marked animal data is no different than the rest of the statistical field. The methods used for analysis are those that are available in reliable software packages. Thus, the critical importance of having reliable, up–to–date software available to biologists is obvious. Statisticians have continued to develop more robust models, ever expanding the suite of potential analysis methods available. But without software to implement these newer methods, they will languish in the abstract, and not be applied to the problems deserving them. In the Computers and Software Session, two new software packages are described, a comparison of implementation of methods for the estimation of nest survival is provided, and a more speculative paper about how the next generation of software might be structured is presented. Rotella et al. (2004 compare nest survival estimation with different software packages: SAS logistic regression, SAS non–linear mixed models, and Program MARK. Nests are assumed to be visited at various, possibly infrequent, intervals. All of the approaches described compute nest survival with the same likelihood, and require that the age of the nest is known to account for nests that eventually hatch. However, each approach offers advantages and disadvantages, explored by Rotella et al. (2004. Efford et al. (2004 present a new software package called DENSITY. The package computes population abundance and density from trapping arrays and other detection methods with a new and unique approach. DENSITY represents the first major addition to the analysis of trapping arrays in 20 years. Barker & White (2004 discuss how existing software such as Program MARK require that each new model’s likelihood must be programmed specifically for that model. They wishfully think that future software might allow the user to combine

  20. Improving the software fault localization process through testability information

    NARCIS (Netherlands)

    Gonzalez-Sanchez, A.; Abreu, R.; Gross, H.; Van Gemund, A.

    2010-01-01

    When failures occur during software testing, automated software fault localization helps to diagnose their root causes and identify the defective components of a program to support debugging. Diagnosis is carried out by selecting test cases in such way that their pass or fail information will narrow

  1. Visualizing Metrics on Areas of Interest in Software Architecture Diagrams

    NARCIS (Netherlands)

    Byelas, Heorhiy; Telea, Alexandru; Eades, P; Ertl, T; Shen, HW

    2009-01-01

    We present a new method for the combined visualization of software architecture diagrams, Such as UML class diagrams or component diagrams, and software metrics defined on groups of diagram elements. Our method extends an existing rendering technique for the so-called areas of interest in system

  2. Software Engineering Reviews and Audits

    CERN Document Server

    Summers, Boyd L

    2011-01-01

    Accurate software engineering reviews and audits have become essential to the success of software companies and military and aerospace programs. These reviews and audits define the framework and specific requirements for verifying software development efforts. Authored by an industry professional with three decades of experience, Software Engineering Reviews and Audits offers authoritative guidance for conducting and performing software first article inspections, and functional and physical configuration software audits. It prepares readers to answer common questions for conducting and perform

  3. Business Management Software Axolon ERP

    OpenAIRE

    Axolon ERP Solution

    2018-01-01

    Axolon ERP a Business Management Software www.axolonerp.com by Micromind is a comprehensive business management software solution for businesses. We deliver Business Management Software Dubai in UAE, GCC Countries and products also include ERP Software Dubai. HR & Payroll, Inventory Software, Project Management, Software Development, Solutions and Services in Dubai, UAE for small and medium sized Enterprises (SME) in the middle east with a easy-to-use, secure and efficient business management...

  4. Desenvolupament d'un sistema de monitoratge per a Software Defined Networks (SDN)

    OpenAIRE

    Navarro Sánchez, Albert

    2015-01-01

    Les Software Defined-Networks (SDN) són una tecnologia emergent que permet als components software estendre funcionalitats sobre la xarxa. En aquest projecte s'estudia com pot encaixar Polygraph, un sistema de monitoratge per a xarxes tradicionals, dins les SDN. Software Defined-Networks (SDN) are a new tecnology that allows software components to add new functionalities on networks. This project studies how Polygraph, a monitoring system for traditional networks, can fit in a SDN scenario.

  5. Software FMEA analysis for safety-related application software

    International Nuclear Information System (INIS)

    Park, Gee-Yong; Kim, Dong Hoon; Lee, Dong Young

    2014-01-01

    Highlights: • We develop a modified FMEA analysis suited for applying to software architecture. • A template for failure modes on a specific software language is established. • A detailed-level software FMEA analysis on nuclear safety software is presented. - Abstract: A method of a software safety analysis is described in this paper for safety-related application software. The target software system is a software code installed at an Automatic Test and Interface Processor (ATIP) in a digital reactor protection system (DRPS). For the ATIP software safety analysis, at first, an overall safety or hazard analysis is performed over the software architecture and modules, and then a detailed safety analysis based on the software FMEA (Failure Modes and Effect Analysis) method is applied to the ATIP program. For an efficient analysis, the software FMEA analysis is carried out based on the so-called failure-mode template extracted from the function blocks used in the function block diagram (FBD) for the ATIP software. The software safety analysis by the software FMEA analysis, being applied to the ATIP software code, which has been integrated and passed through a very rigorous system test procedure, is proven to be able to provide very valuable results (i.e., software defects) that could not be identified during various system tests

  6. High-level Component Interfaces for Collaborative Development: A Proposal

    Directory of Open Access Journals (Sweden)

    Thomas Marlowe

    2009-12-01

    Full Text Available Software development has rapidly moved toward collaborative development models where multiple partners collaborate in creating and evolving software intensive systems or components of sophisticated ubiquitous socio-technical-ecosystems. In this paper we extend the concept of software interface to a flexible high-level interface as means for accommodating change and localizing, controlling and managing the exchange of knowledge and functional, behavioral, quality, project and business related information between the partners and between the developed components.

  7. The contribution of instrumentation and control software to system reliability

    International Nuclear Information System (INIS)

    Fryer, M.O.

    1984-01-01

    Advanced instrumentation and control systems are usually implemented using computers that monitor the instrumentation and issue commands to control elements. The control commands are based on instrument readings and software control logic. The reliability of the total system will be affected by the software design. When comparing software designs, an evaluation of how each design can contribute to the reliability of the system is desirable. Unfortunately, the science of reliability assessment of combined hardware and software systems is in its infancy. Reliability assessment of combined hardware/software systems is often based on over-simplified assumptions about software behavior. A new method of reliability assessment of combined software/hardware systems is presented. The method is based on a procedure called fault tree analysis which determines how component failures can contribute to system failure. Fault tree analysis is a well developed method for reliability assessment of hardware systems and produces quantitative estimates of failure probability based on component failure rates. It is shown how software control logic can be mapped into a fault tree that depicts both software and hardware contributions to system failure. The new method is important because it provides a way for quantitatively evaluating the reliability contribution of software designs. In many applications, this can help guide designers in producing safer and more reliable systems. An application to the nuclear power research industry is discussed

  8. National software infrastructure for lattice gauge theory

    International Nuclear Information System (INIS)

    Brower, Richard C

    2005-01-01

    The current status of the SciDAC software infrastructure project for lattice gauge theory is summarized. This includes the the design of a QCD application programmers interface (API) that allows existing and future codes to be run efficiently on Terascale hardware facilities and to be rapidly ported to new dedicated or commercial platforms. The critical components of the API have been implemented and are in use on the US QCDOC hardware at BNL and on both the switched and mesh architecture Pentium 4 clusters at Fermi National Accelerator Laboratory (FNAL) and Thomas Jefferson National Accelerator Facility (JLab). Future software infrastructure requirements and research directions are also discussed

  9. A learning apprentice for software parts composition

    Science.gov (United States)

    Allen, Bradley P.; Holtzman, Peter L.

    1987-01-01

    An overview of the knowledge acquisition component of the Bauhaus, a prototype computer aided software engineering (CASE) workstation for the development of domain-specific automatic programming systems (D-SAPS) is given. D-SAPS use domain knowledge in the refinement of a description of an application program into a compilable implementation. The approach to the construction of D-SAPS was to automate the process of refining a description of a program, expressed in an object-oriented domain language, into a configuration of software parts that implement the behavior of the domain objects.

  10. The Ettention software package

    International Nuclear Information System (INIS)

    Dahmen, Tim; Marsalek, Lukas; Marniok, Nico; Turoňová, Beata; Bogachev, Sviatoslav; Trampert, Patrick; Nickels, Stefan; Slusallek, Philipp

    2016-01-01

    We present a novel software package for the problem “reconstruction from projections” in electron microscopy. The Ettention framework consists of a set of modular building-blocks for tomographic reconstruction algorithms. The well-known block iterative reconstruction method based on Kaczmarz algorithm is implemented using these building-blocks, including adaptations specific to electron tomography. Ettention simultaneously features (1) a modular, object-oriented software design, (2) optimized access to high-performance computing (HPC) platforms such as graphic processing units (GPU) or many-core architectures like Xeon Phi, and (3) accessibility to microscopy end-users via integration in the IMOD package and eTomo user interface. We also provide developers with a clean and well-structured application programming interface (API) that allows for extending the software easily and thus makes it an ideal platform for algorithmic research while hiding most of the technical details of high-performance computing. - Highlights: • Novel software package for “reconstruction from projections” in electron microscopy. • Support for high-resolution reconstructions on iterative reconstruction algorithms. • Support for CPU, GPU and Xeon Phi. • Integration in the IMOD software. • Platform for algorithm researchers: object oriented, modular design.

  11. Software reliability assessment

    International Nuclear Information System (INIS)

    Barnes, M.; Bradley, P.A.; Brewer, M.A.

    1994-01-01

    The increased usage and sophistication of computers applied to real time safety-related systems in the United Kingdom has spurred on the desire to provide a standard framework within which to assess dependable computing systems. Recent accidents and ensuing legislation have acted as a catalyst in this area. One particular aspect of dependable computing systems is that of software, which is usually designed to reduce risk at the system level, but which can increase risk if it is unreliable. Various organizations have recognized the problem of assessing the risk imposed to the system by unreliable software, and have taken initial steps to develop and use such assessment frameworks. This paper relates the approach of Consultancy Services of AEA Technology in developing a framework to assess the risk imposed by unreliable software. In addition, the paper discusses the experiences gained by Consultancy Services in applying the assessment framework to commercial and research projects. The framework is applicable to software used in safety applications, including proprietary software. Although the paper is written with Nuclear Reactor Safety applications in mind, the principles discussed can be applied to safety applications in all industries

  12. The Ettention software package

    Energy Technology Data Exchange (ETDEWEB)

    Dahmen, Tim, E-mail: Tim.Dahmen@dfki.de [German Research Center for Artificial Intelligence GmbH (DFKI), 66123 Saarbrücken (Germany); Saarland University, 66123 Saarbrücken (Germany); Marsalek, Lukas [Eyen SE, Na Nivách 1043/16, 141 00 Praha 4 (Czech Republic); Saarland University, 66123 Saarbrücken (Germany); Marniok, Nico [Saarland University, 66123 Saarbrücken (Germany); Turoňová, Beata [Saarland University, 66123 Saarbrücken (Germany); IMPRS-CS, Max-Planck Institute for Informatics, Campus E 1.4, 66123 Saarbrücken (Germany); Bogachev, Sviatoslav [Saarland University, 66123 Saarbrücken (Germany); Trampert, Patrick; Nickels, Stefan [German Research Center for Artificial Intelligence GmbH (DFKI), 66123 Saarbrücken (Germany); Slusallek, Philipp [German Research Center for Artificial Intelligence GmbH (DFKI), 66123 Saarbrücken (Germany); Saarland University, 66123 Saarbrücken (Germany)

    2016-02-15

    We present a novel software package for the problem “reconstruction from projections” in electron microscopy. The Ettention framework consists of a set of modular building-blocks for tomographic reconstruction algorithms. The well-known block iterative reconstruction method based on Kaczmarz algorithm is implemented using these building-blocks, including adaptations specific to electron tomography. Ettention simultaneously features (1) a modular, object-oriented software design, (2) optimized access to high-performance computing (HPC) platforms such as graphic processing units (GPU) or many-core architectures like Xeon Phi, and (3) accessibility to microscopy end-users via integration in the IMOD package and eTomo user interface. We also provide developers with a clean and well-structured application programming interface (API) that allows for extending the software easily and thus makes it an ideal platform for algorithmic research while hiding most of the technical details of high-performance computing. - Highlights: • Novel software package for “reconstruction from projections” in electron microscopy. • Support for high-resolution reconstructions on iterative reconstruction algorithms. • Support for CPU, GPU and Xeon Phi. • Integration in the IMOD software. • Platform for algorithm researchers: object oriented, modular design.

  13. Automated Freedom from Interference Analysis for Automotive Software

    OpenAIRE

    Leitner-Fischer , Florian; Leue , Stefan; Liu , Sirui

    2016-01-01

    International audience; Freedom from Interference for automotive software systems developed according to the ISO 26262 standard means that a fault in a less safety critical software component will not lead to a fault in a more safety critical component. It is an important concern in the realm of functional safety for automotive systems. We present an automated method for the analysis of concurrency-related interferences based on the QuantUM approach and tool that we have previously developed....

  14. Web accessibility and open source software.

    Science.gov (United States)

    Obrenović, Zeljko

    2009-07-01

    A Web browser provides a uniform user interface to different types of information. Making this interface universally accessible and more interactive is a long-term goal still far from being achieved. Universally accessible browsers require novel interaction modalities and additional functionalities, for which existing browsers tend to provide only partial solutions. Although functionality for Web accessibility can be found as open source and free software components, their reuse and integration is complex because they were developed in diverse implementation environments, following standards and conventions incompatible with the Web. To address these problems, we have started several activities that aim at exploiting the potential of open-source software for Web accessibility. The first of these activities is the development of Adaptable Multi-Interface COmmunicator (AMICO):WEB, an infrastructure that facilitates efficient reuse and integration of open source software components into the Web environment. The main contribution of AMICO:WEB is in enabling the syntactic and semantic interoperability between Web extension mechanisms and a variety of integration mechanisms used by open source and free software components. Its design is based on our experiences in solving practical problems where we have used open source components to improve accessibility of rich media Web applications. The second of our activities involves improving education, where we have used our platform to teach students how to build advanced accessibility solutions from diverse open-source software. We are also partially involved in the recently started Eclipse projects called Accessibility Tools Framework (ACTF), the aim of which is development of extensible infrastructure, upon which developers can build a variety of utilities that help to evaluate and enhance the accessibility of applications and content for people with disabilities. In this article we briefly report on these activities.

  15. Automated Improvement of Software Architecture Models for Performance and Other Quality Attributes

    OpenAIRE

    Koziolek, Anne

    2013-01-01

    Quality attributes, such as performance or reliability, are crucial for the success of a software system and largely influenced by the software architecture. Their quantitative prediction supports systematic, goal-oriented software design and forms a base of an engineering approach to software design. This thesis proposes a method and tool to automatically improve component-based software architecture (CBA) models based on such quantitative quality prediction techniques.

  16. Component framework support for developing device drivers

    OpenAIRE

    Michiels, Sam; Kenens, Peter; Matthijs, Frank; Walravens, Dirk; Berbers, Yolande; Verbaeten, Pierre

    2000-01-01

    In this paper, we advocate the use of component framework technology for developing state-of-the-art system software. Relevant contributions of DiPS (Distrinet Protocol Stack), a component framework, include its anonymous interaction model, connectors for handling non-functional issues such as the concurrency model, and builder support. DiPS has effectively been used in industrial protocol stacks. This paper shows how we are using the DiPS component framework to build and support flexib...

  17. Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 14

    Science.gov (United States)

    1996-01-01

    The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

  18. Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 15

    Science.gov (United States)

    1997-01-01

    The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

  19. Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 13

    Science.gov (United States)

    1995-01-01

    The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

  20. Software cost/resource modeling: Software quality tradeoff measurement

    Science.gov (United States)

    Lawler, R. W.

    1980-01-01

    A conceptual framework for treating software quality from a total system perspective is developed. Examples are given to show how system quality objectives may be allocated to hardware and software; to illustrate trades among quality factors, both hardware and software, to achieve system performance objectives; and to illustrate the impact of certain design choices on software functionality.

  1. Software architecture analysis tool : software architecture metrics collection

    NARCIS (Netherlands)

    Muskens, J.; Chaudron, M.R.V.; Westgeest, R.

    2002-01-01

    The Software Engineering discipline lacks the ability to evaluate software architectures. Here we describe a tool for software architecture analysis that is based on metrics. Metrics can be used to detect possible problems and bottlenecks in software architectures. Even though metrics do not give a

  2. Impact of Agile Software Development Model on Software Maintainability

    Science.gov (United States)

    Gawali, Ajay R.

    2012-01-01

    Software maintenance and support costs account for up to 60% of the overall software life cycle cost and often burdens tightly budgeted information technology (IT) organizations. Agile software development approach delivers business value early, but implications on software maintainability are still unknown. The purpose of this quantitative study…

  3. Improving Software Sustainability: Lessons Learned from Profiles in Science.

    Science.gov (United States)

    Gallagher, Marie E

    2013-01-01

    The Profiles in Science® digital library features digitized surrogates of historical items selected from the archival collections of the U.S. National Library of Medicine as well as collaborating institutions. In addition, it contains a database of descriptive, technical and administrative metadata. It also contains various software components that allow creation of the metadata, management of the digital items, and access to the items and metadata through the Profiles in Science Web site [1]. The choices made building the digital library were designed to maximize the sustainability and long-term survival of all of the components of the digital library [2]. For example, selecting standard and open digital file formats rather than proprietary formats increases the sustainability of the digital files [3]. Correspondingly, using non-proprietary software may improve the sustainability of the software--either through in-house expertise or through the open source community. Limiting our digital library software exclusively to open source software or to software developed in-house has not been feasible. For example, we have used proprietary operating systems, scanning software, a search engine, and office productivity software. We did this when either lack of essential capabilities or the cost-benefit trade-off favored using proprietary software. We also did so knowing that in the future we would need to replace or upgrade some of our proprietary software, analogous to migrating from an obsolete digital file format to a new format as the technological landscape changes. Since our digital library's start in 1998, all of its software has been upgraded or replaced, but the digitized items have not yet required migration to other formats. Technological changes that compelled us to replace proprietary software included the cost of product licensing, product support, incompatibility with other software, prohibited use due to evolving security policies, and product abandonment

  4. Belle II Software

    International Nuclear Information System (INIS)

    Kuhr, T; Ritter, M

    2016-01-01

    Belle II is a next generation B factory experiment that will collect 50 times more data than its predecessor, Belle. The higher luminosity at the SuperKEKB accelerator leads to higher background levels and requires a major upgrade of the detector. As a consequence, the simulation, reconstruction, and analysis software must also be upgraded substantially. Most of the software has been redesigned from scratch, taking into account the experience from Belle and other experiments and utilizing new technologies. The large amount of experimental and simulated data requires a high level of reliability and reproducibility, even in parallel environments. Several technologies, tools, and organizational measures are employed to evaluate and monitor the performance of the software during development. (paper)

  5. New Media as Software

    Directory of Open Access Journals (Sweden)

    Manuel Portela

    2014-03-01

    Full Text Available Review of Lev Manovich, Software Takes Command: Extending the Language of New Media. London: Bloomsbury, 2013, 358 pp. ISBN 978-1-6235-6817-7. In Lev Manovich’s most recent book, this programmatic interrogation of our medial condition leads to the following question: do media still exist after software? This is the question that triggers Manovich’s dialogue both with computing history and with theories of digital media of recent decades, including the extension of his own previous formulations in The Language of New Media, published in 2001, and which became a major reference work in the field. The subtitle of the new book points precisely to this critical revisiting of his earlier work in the context of ubiquitous computing and accelerated transcoding of social, cultural and artistic practices by software.

  6. LHCb software strategy

    CERN Document Server

    Van Herwijnen, Eric

    1998-01-01

    This document describes the software strategy of the LHCb experiment. The main objective is to reuse designs and code wherever possible; We will implement an architecturally driven design process; This architectural process will be implemented using Object Technology; We aim for platform indepence; try to take advantage of distributed computing and will use industry standards, commercial software and profit from HEP developments; We will implement a common software process and development environment. One of the major problems that we are immediately faced with is the conversion of our current code from Fortran into an Object Oriented language and the conversion of our current developers to Object technology. Some technical terms related to OO programming are defined in Annex A.1

  7. Test af Software

    DEFF Research Database (Denmark)

    Dette dokument udgør slutrapporten for netværkssamarbejdet ”Testnet”, som er udført i perioden 1.4.2006 til 31.12.2008. Netværket beskæftiger sig navnlig med emner inden for test af indlejret og teknisk software, men et antal eksempler på problemstillinger og løsninger forbundet med test af...... administrativ software indgår også. Rapporten er opdelt i følgende 3 dele: Overblik. Her giver vi et resumé af netværkets formål, aktiviteter og resultater. State of the art af software test ridses op. Vi omtaler, at CISS og netværket tager nye tiltag. Netværket. Formål, deltagere og behandlede emner på ti...

  8. Aircraft Design Software

    Science.gov (United States)

    1997-01-01

    Successful commercialization of the AirCraft SYNThesis (ACSYNT) tool has resulted in the creation of Phoenix Integration, Inc. ACSYNT has been exclusively licensed to the company, an outcome of a seven year, $3 million effort to provide unique software technology to a focused design engineering market. Ames Research Center formulated ACSYNT and in working with the Virginia Polytechnic Institute CAD Laboratory, began to design and code a computer-aided design for ACSYNT. Using a Joint Sponsored Research Agreement, Ames formed an industry-government-university alliance to improve and foster research and development for the software. As a result of the ACSYNT Institute, the software is becoming a predominant tool for aircraft conceptual design. ACSYNT has been successfully applied to high- speed civil transport configuration, subsonic transports, and supersonic fighters.

  9. Lecture 2: Software Security

    CERN Multimedia

    CERN. Geneva

    2013-01-01

    Computer security has been an increasing concern for IT professionals for a number of years, yet despite all the efforts, computer systems and networks remain highly vulnerable to attacks of different kinds. Design flaws and security bugs in the underlying software are among the main reasons for this. This lecture addresses the following question: how to create secure software? The lecture starts with a definition of computer security and an explanation of why it is so difficult to achieve. It then introduces the main security principles (like least-privilege, or defense-in-depth) and discusses security in different phases of the software development cycle. The emphasis is put on the implementation part: most common pitfalls and security bugs are listed, followed by advice on best practice for security development, testing and deployment. Sebastian Lopienski is CERN’s deputy Computer Security Officer. He works on security strategy and policies; offers internal consultancy and audit services; develops and ...

  10. Managing Scientific Software Complexity with Bocca and CCA

    Directory of Open Access Journals (Sweden)

    Benjamin A. Allan

    2008-01-01

    Full Text Available In high-performance scientific software development, the emphasis is often on short time to first solution. Even when the development of new components mostly reuses existing components or libraries and only small amounts of new code must be created, dealing with the component glue code and software build processes to obtain complete applications is still tedious and error-prone. Component-based software meant to reduce complexity at the application level increases complexity to the extent that the user must learn and remember the interfaces and conventions of the component model itself. To address these needs, we introduce Bocca, the first tool to enable application developers to perform rapid component prototyping while maintaining robust software-engineering practices suitable to HPC environments. Bocca provides project management and a comprehensive build environment for creating and managing applications composed of Common Component Architecture components. Of critical importance for high-performance computing (HPC applications, Bocca is designed to operate in a language-agnostic way, simultaneously handling components written in any of the languages commonly used in scientific applications: C, C++, Fortran, Python and Java. Bocca automates the tasks related to the component glue code, freeing the user to focus on the scientific aspects of the application. Bocca embraces the philosophy pioneered by Ruby on Rails for web applications: start with something that works, and evolve it to the user's purpose.

  11. Software Correlator for Radioastron Mission

    Science.gov (United States)

    Likhachev, Sergey F.; Kostenko, Vladimir I.; Girin, Igor A.; Andrianov, Andrey S.; Rudnitskiy, Alexey G.; Zharov, Vladimir E.

    In this paper, we discuss the characteristics and operation of Astro Space Center (ASC) software FX correlator that is an important component of space-ground interferometer for Radioastron project. This project performs joint observations of compact radio sources using 10m space radio telescope (SRT) together with ground radio telescopes at 92, 18, 6 and 1.3 cm wavelengths. In this paper, we describe the main features of space-ground VLBI data processing of Radioastron project using ASC correlator. Quality of implemented fringe search procedure provides positive results without significant losses in correlated amplitude. ASC Correlator has a computational power close to real time operation. The correlator has a number of processing modes: “Continuum”, “Spectral Line”, “Pulsars”, “Giant Pulses”,“Coherent”. Special attention is paid to peculiarities of Radioastron space-ground VLBI data processing. The algorithms of time delay and delay rate calculation are also discussed, which is a matter of principle for data correlation of space-ground interferometers. During five years of Radioastron SRT successful operation, ASC correlator showed high potential of satisfying steady growing needs of current and future ground and space VLBI science. Results of ASC software correlator operation are demonstrated.

  12. Software diagnostic aids on Aladdin

    International Nuclear Information System (INIS)

    Eisert, D.E.; Stott, J.P.

    1990-01-01

    The upgrade of the Aladdin control system included many enhancements in the software. Some of the new diagnostic aids provided are: intelligent temporary logging of all readbacks for at least the previous 12 hours, permanent logging of specified readbacks into disk files, temporary logging of beam positions at an operator-specified interval, an alarm system for all devices, including range limits for analogue readbacks that should remain fixed and window limits which automatically track readbacks that should decay or increase monotonically, automated checklists to verify the devices are within the specified operating range for a particular phase of operation, latched digital signals to capture momentary changes. The software has been designed to alert the operator when something is wrong, without generating a flood of unimportant messages, and to make it possible to observe and record readbacks over a range of time scales. The latter capability is essential for tracking down marginal components and correlating observed problems with possible causes. The algorithms used for these diagnostic aids, and how well they perform their desired tasks, are described in this paper. (orig.)

  13. Methods of Software Verification

    Directory of Open Access Journals (Sweden)

    R. E. Gurin

    2015-01-01

    Full Text Available This article is devoted to the problem of software verification (SW. Methods of software verification designed to check the software for compliance with the stated requirements such as correctness, system security and system adaptability to small changes in the environment, portability and compatibility, etc. These are various methods both by the operation process and by the way of achieving result. The article describes the static and dynamic methods of software verification and paid attention to the method of symbolic execution. In its review of static analysis are discussed and described the deductive method, and methods for testing the model. A relevant issue of the pros and cons of a particular method is emphasized. The article considers classification of test techniques for each method. In this paper we present and analyze the characteristics and mechanisms of the static analysis of dependencies, as well as their views, which can reduce the number of false positives in situations where the current state of the program combines two or more states obtained both in different paths of execution and in working with multiple object values. Dependences connect various types of software objects: single variables, the elements of composite variables (structure fields, array elements, the size of the heap areas, the length of lines, the number of initialized array elements in the verification code using static methods. The article pays attention to the identification of dependencies within the framework of the abstract interpretation, as well as gives an overview and analysis of the inference tools.Methods of dynamic analysis such as testing, monitoring and profiling are presented and analyzed. Also some kinds of tools are considered which can be applied to the software when using the methods of dynamic analysis. Based on the work a conclusion is drawn, which describes the most relevant problems of analysis techniques, methods of their solutions and

  14. Software Dependability and Safety Evaluations ESA's Initiative

    Science.gov (United States)

    Hernek, M.

    ESA has allocated funds for an initiative to evaluate Dependability and Safety methods of Software. The objectives of this initiative are; · More extensive validation of Safety and Dependability techniques for Software · Provide valuable results to improve the quality of the Software thus promoting the application of Dependability and Safety methods and techniques. ESA space systems are being developed according to defined PA requirement specifications. These requirements may be implemented through various design concepts, e.g. redundancy, diversity etc. varying from project to project. Analysis methods (FMECA. FTA, HA, etc) are frequently used during requirements analysis and design activities to assure the correct implementation of system PA requirements. The criticality level of failures, functions and systems is determined and by doing that the critical sub-systems are identified, on which dependability and safety techniques are to be applied during development. Proper performance of the software development requires the development of a technical specification for the products at the beginning of the life cycle. Such technical specification comprises both functional and non-functional requirements. These non-functional requirements address characteristics of the product such as quality, dependability, safety and maintainability. Software in space systems is more and more used in critical functions. Also the trend towards more frequent use of COTS and reusable components pose new difficulties in terms of assuring reliable and safe systems. Because of this, its dependability and safety must be carefully analysed. ESA identified and documented techniques, methods and procedures to ensure that software dependability and safety requirements are specified and taken into account during the design and development of a software system and to verify/validate that the implemented software systems comply with these requirements [R1].

  15. User book of SPAD software

    International Nuclear Information System (INIS)

    Eschylle, R.

    1987-01-01

    Data-gathering and accumulation is swelling in any domain thanks to computer science. A data analysis is aimed at extraction of useful data easily readable for the user. Among the mathematical methods used three of them are developed in the Spad software: - principal component analysis, - factorial analysis of simple correspondence, - factorial analysis of multiple correspondence. Data tables are first defined in this paper together with terms used by statisticians. Then the user manual describes the six analysis steps (or modules) included in the program, the links of steps which give classical data analysis. At last, for each step an ''using notice'' is given which describes the step parameters after some comments on the step object [fr

  16. A SOFTWARE RELIABILITY ESTIMATION METHOD TO NUCLEAR SAFETY SOFTWARE

    Directory of Open Access Journals (Sweden)

    GEE-YONG PARK

    2014-02-01

    Full Text Available A method for estimating software reliability for nuclear safety software is proposed in this paper. This method is based on the software reliability growth model (SRGM, where the behavior of software failure is assumed to follow a non-homogeneous Poisson process. Two types of modeling schemes based on a particular underlying method are proposed in order to more precisely estimate and predict the number of software defects based on very rare software failure data. The Bayesian statistical inference is employed to estimate the model parameters by incorporating software test cases as a covariate into the model. It was identified that these models are capable of reasonably estimating the remaining number of software defects which directly affects the reactor trip functions. The software reliability might be estimated from these modeling equations, and one approach of obtaining software reliability value is proposed in this paper.

  17. Agile software development

    CERN Document Server

    Stober, Thomas

    2009-01-01

    Software Development is moving towards a more agile and more flexible approach. It turns out that the traditional 'waterfall' model is not supportive in an environment where technical, financial and strategic constraints are changing almost every day. But what is agility? What are today's major approaches? And especially: What is the impact of agile development principles on the development teams, on project management and on software architects? How can large enterprises become more agile and improve their business processes, which have been existing since many, many years? What are the limit

  18. Software Testing as Science

    Directory of Open Access Journals (Sweden)

    Ingrid Gallesdic

    2013-06-01

    Full Text Available The most widespread opinion among people who have some connection with software testing is that this activity is an art. In fact, books have been published widely whose titles refer to it as art, role or process. But because software complexity is increasing every year, this paper proposes a new approach, conceiving the test as a science. This is because the processes by which they are applied are the steps of the scientific method: inputs, processes, outputs. The contents of this paper examines the similarities and test characteristics as science.

  19. Provider software buyer's guide.

    Science.gov (United States)

    1994-03-01

    To help long term care providers find new ways to improve quality of care and efficiency, Provider magazine presents the fourth annual listing of software firms marketing computer programs for all areas of nursing facility operations. On the following five pages, more than 80 software firms display their wares, with programs such as minimum data set and care planning, dietary, accounting and financials, case mix, and medication administration records. The guide also charts compatible hardware, integration ability, telephone numbers, company contacts, and easy-to-use reader service numbers.

  20. Model of software quality

    OpenAIRE

    Valencia Ayala, Luz Estela; Villa Sánchez, Paula Andréa; Ocampo S., Carlos Alberto

    2009-01-01

    En un mercado globalizado donde las empresas deben innovar y mejorar continuamente para crecer y ser más competitivas, es necesario tener acceso a certificaciones de calidad internacionales que les den un respaldo y puedan mantenerse en este mercado. Las certificaciones de calidad en la industria del software ayudan a las empresas a ser más productivas disminuyendo costos y tiempo en sus desarrollos. Las empresas de desarrollo de software de nuestro país en su mayoría son micro y pequeñas...

  1. Security System Software

    Science.gov (United States)

    1993-01-01

    C Language Integration Production System (CLIPS), a NASA-developed expert systems program, has enabled a security systems manufacturer to design a new generation of hardware. C.CURESystem 1 Plus, manufactured by Software House, is a software based system that is used with a variety of access control hardware at installations around the world. Users can manage large amounts of information, solve unique security problems and control entry and time scheduling. CLIPS acts as an information management tool when accessed by C.CURESystem 1 Plus. It asks questions about the hardware and when given the answer, recommends possible quick solutions by non-expert persons.

  2. Software product quality control

    CERN Document Server

    Wagner, Stefan

    2013-01-01

    Quality is not a fixed or universal property of software; it depends on the context and goals of its stakeholders. Hence, when you want to develop a high-quality software system, the first step must be a clear and precise specification of quality. Yet even if you get it right and complete, you can be sure that it will become invalid over time. So the only solution is continuous quality control: the steady and explicit evaluation of a product's properties with respect to its updated quality goals.This book guides you in setting up and running continuous quality control in your environment. Star

  3. Software Safety and Security

    CERN Document Server

    Nipkow, T; Hauptmann, B

    2012-01-01

    Recent decades have seen major advances in methods and tools for checking the safety and security of software systems. Automatic tools can now detect security flaws not only in programs of the order of a million lines of code, but also in high-level protocol descriptions. There has also been something of a breakthrough in the area of operating system verification. This book presents the lectures from the NATO Advanced Study Institute on Tools for Analysis and Verification of Software Safety and Security; a summer school held at Bayrischzell, Germany, in 2011. This Advanced Study Institute was

  4. Maintenance simulation: Software issues

    Energy Technology Data Exchange (ETDEWEB)

    Luk, C.H.; Jette, M.A.

    1995-07-01

    The maintenance of a distributed software system in a production environment involves: (1) maintaining software integrity, (2) maintaining and database integrity, (3) adding new features, and (4) adding new systems. These issues will be discussed in general: what they are and how they are handled. This paper will present our experience with a distributed resource management system that accounts for resources consumed, in real-time, on a network of heterogenous computers. The simulated environments to maintain this system will be presented relate to the four maintenance areas.

  5. Processeringsoptimering med Canons software

    DEFF Research Database (Denmark)

    Precht, Helle

    2009-01-01

    . Muligheder i software optimering blev studeret i relation til optimal billedkvalitet og kontrol optagelser, for at undersøge om det var muligt at acceptere diagnostisk billedkvalitet og derved tage afsæt i ALARA. Metode og materialer Et kvantitativt eksperimentelt studie baseret på forsøg med teknisk og...... humant fantom. CD Rad fantom anvendes som teknisk fantom, hvor billederne blev analyseret med CD Rad software, og resultatet var en objektiv IQF værdi. Det humane fantom var et lamme pelvis med femur, der via NRPB’ er sammenlignelig med absorptionen ved et femårigt barn. De humane forsøgsbilleder blev...

  6. Agile distributed software development

    DEFF Research Database (Denmark)

    Persson, John Stouby; Mathiassen, Lars; Aaen, Ivan

    2012-01-01

    While face-to-face interaction is fundamental in agile software development, distributed environments must rely extensively on mediated interactions. Practicing agile principles in distributed environments therefore poses particular control challenges related to balancing fixed vs. evolving quality...... requirements and people vs. process-based collaboration. To investigate these challenges, we conducted an in-depth case study of a successful agile distributed software project with participants from a Russian firm and a Danish firm. Applying Kirsch’s elements of control framework, we offer an analysis of how...

  7. Six Sigma software development

    CERN Document Server

    Tayntor, Christine B

    2002-01-01

    Since Six Sigma has had marked success in improving quality in other settings, and since the quality of software remains poor, it seems a natural evolution to apply the concepts and tools of Six Sigma to system development and the IT department. Until now however, there were no books available that applied these concepts to the system development process. Six Sigma Software Development fills this void and illustrates how Six Sigma concepts can be applied to all aspects of the evolving system development process. It includes the traditional waterfall model and in the support of legacy systems,

  8. Inventory of safeguards software

    International Nuclear Information System (INIS)

    Suzuki, Mitsutoshi; Horino, Koichi

    2009-03-01

    The purpose of this survey activity will serve as a basis for determining what needs may exist in this arena for development of next-generation safeguards systems and approaches. 23 software tools are surveyed by JAEA and NMCC. Exchanging information regarding existing software tools for safeguards and discussing about a next R and D program of developing a general-purpose safeguards tool should be beneficial to a safeguards system design and indispensable to evaluate a safeguards system for future nuclear fuel facilities. (author)

  9. Machine Tool Software

    Science.gov (United States)

    1988-01-01

    A NASA-developed software package has played a part in technical education of students who major in Mechanical Engineering Technology at William Rainey Harper College. Professor Hack has been using (APT) Automatically Programmed Tool Software since 1969 in his CAD/CAM Computer Aided Design and Manufacturing curriculum. Professor Hack teaches the use of APT programming languages for control of metal cutting machines. Machine tool instructions are geometry definitions written in APT Language to constitute a "part program." The part program is processed by the machine tool. CAD/CAM students go from writing a program to cutting steel in the course of a semester.

  10. Green in software engineering

    CERN Document Server

    Calero Munoz, Coral

    2015-01-01

    This is the first book that presents a comprehensive overview of sustainability aspects in software engineering. Its format follows the structure of the SWEBOK and covers the key areas involved in the incorporation of green aspects in software engineering, encompassing topics from requirement elicitation to quality assurance and maintenance, while also considering professional practices and economic aspects. The book consists of thirteen chapters, which are structured in five parts. First the "Introduction" gives an overview of the primary general concepts related to Green IT, discussing wha

  11. Translator for Optimizing Fluid-Handling Components

    Science.gov (United States)

    Landon, Mark; Perry, Ernest

    2007-01-01

    A software interface has been devised to facilitate optimization of the shapes of valves, elbows, fittings, and other components used to handle fluids under extreme conditions. This software interface translates data files generated by PLOT3D (a NASA grid-based plotting-and- data-display program) and by computational fluid dynamics (CFD) software into a format in which the files can be read by Sculptor, which is a shape-deformation- and-optimization program. Sculptor enables the user to interactively, smoothly, and arbitrarily deform the surfaces and volumes in two- and three-dimensional CFD models. Sculptor also includes design-optimization algorithms that can be used in conjunction with the arbitrary-shape-deformation components to perform automatic shape optimization. In the optimization process, the output of the CFD software is used as feedback while the optimizer strives to satisfy design criteria that could include, for example, improved values of pressure loss, velocity, flow quality, mass flow, etc.

  12. Model-driven software engineering

    NARCIS (Netherlands)

    Amstel, van M.F.; Brand, van den M.G.J.; Protic, Z.; Verhoeff, T.; Hamberg, R.; Verriet, J.

    2014-01-01

    Software plays an important role in designing and operating warehouses. However, traditional software engineering methods for designing warehouse software are not able to cope with the complexity, size, and increase of automation in modern warehouses. This chapter describes Model-Driven Software

  13. The fallacy of Software Patents

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    Software patents are usually used as argument for innovation but do they really promote innovation? Who really benefits from software patents? This talk attempts to show the problems with software patents and how they can actually harm innovation having little value for software users and our society in general.

  14. A methodology for software documentation

    OpenAIRE

    Torres Júnior, Roberto Dias; Ahlert, Hubert

    2000-01-01

    With the growing complexity of window based software and the use of object-oriented, the development of software is getting more complex than ever. Based on that, this article intends to present a methodology for software documentation and to analyze our experience and how this methodology can aid the software maintenance

  15. Flexible Software Design for Korean WA-DGNSS Reference Station

    Directory of Open Access Journals (Sweden)

    Wan Sik Choi

    2013-03-01

    Full Text Available In this paper, we describe the software design results of WA-DGNSS reference station that will be constructed in Korea in the near future. Software design of the WRS (Wide area Reference Station is carried out by applying object oriented software methodology in order to provide flexibilities: easy of model change (namely ionospheric delay model etc and system addition (Galileo, GLONASS in addition to GPS etc. Software design results include the use case diagrams for the functions to be executed, the architecture diagram showing components and their relationships, the activity diagrams of behaviors and models among them, and class diagrams describing the attribute and operation.

  16. Next-generation business intelligence software with Silverlight 3

    CERN Document Server

    Czernicki, Bart

    2010-01-01

    Business Intelligence (BI) software is the code and tools that allow you to view different components of a business using a single visual platform, making comprehending mountains of data easier. Applications that include reports, analytics, statistics, and historical and predictive modeling are all examples of BI applications. Currently, we are in the second generation of BI software, called BI 2.0. This generation is focused on writing BI software that is predictive, adaptive, simple, and interactive. As computers and software have evolved, more data can be presented to end users with increas

  17. Software testing concepts and operations

    CERN Document Server

    Mili, Ali

    2015-01-01

    Explores and identifies the main issues, concepts, principles and evolution of software testing, including software quality engineering and testing concepts, test data generation, test deployment analysis, and software test managementThis book examines the principles, concepts, and processes that are fundamental to the software testing function. This book is divided into five broad parts. Part I introduces software testing in the broader context of software engineering and explores the qualities that testing aims to achieve or ascertain, as well as the lifecycle of software testing. Part II c

  18. Patterns for Parallel Software Design

    CERN Document Server

    Ortega-Arjona, Jorge Luis

    2010-01-01

    Essential reading to understand patterns for parallel programming Software patterns have revolutionized the way we think about how software is designed, built, and documented, and the design of parallel software requires you to consider other particular design aspects and special skills. From clusters to supercomputers, success heavily depends on the design skills of software developers. Patterns for Parallel Software Design presents a pattern-oriented software architecture approach to parallel software design. This approach is not a design method in the classic sense, but a new way of managin

  19. The Art of Software Testing

    CERN Document Server

    Myers, Glenford J; Badgett, Tom

    2011-01-01

    The classic, landmark work on software testing The hardware and software of computing have changed markedly in the three decades since the first edition of The Art of Software Testing, but this book's powerful underlying analysis has stood the test of time. Whereas most books on software testing target particular development techniques, languages, or testing methods, The Art of Software Testing, Third Edition provides a brief but powerful and comprehensive presentation of time-proven software testing approaches. If your software development project is mission critical, this book is an investme

  20. What Counts in Software Process?

    DEFF Research Database (Denmark)

    Cohn, Marisa

    2009-01-01

    and conversations in negotiating between prescriptions from a model and the contingencies that arise in an enactment. A qualitative field study at two Agile software development companies was conducted to investigate the role of artifacts in the software development work and the relationship between these artifacts...... and the Software Process. Documentation of software requirements is a major concern among software developers and software researchers. Agile software development denotes a different relationship to documentation, one that warrants investigation. Empirical findings are presented which suggest a new understanding...