Hfq stimulates the activity of the CCA-adding enzyme

Directory of Open Access Journals (Sweden)

Betat Heike

2007-10-01

Full Text Available Abstract Background The bacterial Sm-like protein Hfq is known as an important regulator involved in many reactions of RNA metabolism. A prominent function of Hfq is the stimulation of RNA polyadenylation catalyzed by E. coli poly(A polymerase I (PAP. As a member of the nucleotidyltransferase superfamily, this enzyme shares a high sequence similarity with an other representative of this family, the tRNA nucleotidyltransferase that synthesizes the 3'-terminal sequence C-C-A to all tRNAs (CCA-adding enzyme. Therefore, it was assumed that Hfq might not only influence the poly(A polymerase in its specific activity, but also other, similar enzymes like the CCA-adding enzyme. Results Based on the close evolutionary relation of these two nucleotidyltransferases, it was tested whether Hfq is a specific modulator acting exclusively on PAP or whether it also influences the activity of the CCA-adding enzyme. The obtained data indicate that the reaction catalyzed by this enzyme is substantially accelerated in the presence of Hfq. Furthermore, Hfq binds specifically to tRNA transcripts, which seems to be the prerequisite for the observed effect on CCA-addition. Conclusion The increase of the CCA-addition in the presence of Hfq suggests that this protein acts as a stimulating factor not only for PAP, but also for the CCA-adding enzyme. In both cases, Hfq interacts with RNA substrates, while a direct binding to the corresponding enzymes was not demonstrated up to now (although experimental data indicate a possible interaction of PAP and Hfq. So far, the basic principle of these stimulatory effects is not clear yet. In case of the CCA-adding enzyme, however, the presented data indicate that the complex between Hfq and tRNA substrate might enhance the product release from the enzyme.

Role of the CCA bulge of prohead RNA of bacteriophage ø29 in DNA packaging.

Science.gov (United States)

Zhao, Wei; Morais, Marc C; Anderson, Dwight L; Jardine, Paul J; Grimes, Shelley

2008-11-14

The oligomeric ring of prohead RNA (pRNA) is an essential component of the ATP-driven DNA packaging motor of bacteriophage ø29. The A-helix of pRNA binds the DNA translocating ATPase gp16 (gene product 16) and the CCA bulge in this helix is essential for DNA packaging in vitro. Mutation of the bulge by base substitution or deletion showed that the size of the bulge, rather than its sequence, is primary in DNA packaging activity. Proheads reconstituted with CCA bulge mutant pRNAs bound the packaging ATPase gp16 and the packaging substrate DNA-gp3, although DNA translocation was not detected with several mutants. Prohead/bulge-mutant pRNA complexes with low packaging activity had a higher rate of ATP hydrolysis per base pair of DNA packaged than proheads with wild-type pRNA. Cryoelectron microscopy three-dimensional reconstruction of proheads reconstituted with a CCA deletion pRNA showed that the protruding pRNA spokes of the motor occupy a different position relative to the head when compared to particles with wild-type pRNA. Therefore, the CCA bulge seems to dictate the orientation of the pRNA spokes. The conformational changes observed for this mutant pRNA may affect gp16 conformation and/or subsequent ATPase-DNA interaction and, consequently, explain the decreased packaging activity observed for CCA mutants.

SciDAC-Center for Plasma Edge Simulation Report

Energy Technology Data Exchange (ETDEWEB)

Parker, Steven [Univ. of Utah, Salt Lake City, UT (United States)

2013-12-24

The Common Component Architecture (CCA) effort is the embodiment of a long-range program of research and development into the formulation, roles, and use of component technologies in high-performance scientific computing. CCA components can interoperate with other components in a variety of frameworks, including SCIRun2 from the University of Utah. The SCIRun2 framework is also developing the ability to connect components from a variety of different models through a mechanism called meta-components. The meta component model operates by providing a plugin architecture for component models. Abstract components are manipulated and managed by the SCIRun2 framework, while concrete component models perform the actual work and communicate with each other directly. We will leverage the SCIRun2 framework and the Kepler system to orchestrate components in the Fusion Simulation Project (FSP) and to provide a CCA-based interface with Kepler. The groundwork for this functionality is being performed with the Scientific Data Management center. The SDM center is developing CCA-compliant interfaces for expressing and executing workflows and create workflow components based on SCIRun and Ptolemy (Kepler) execution engines, including development of uniform interfaces for selecting, starting, and monitoring scientific workflows. Accomplishments include Introduction to CCA and Simulation Software Systems, Introduction into SCIRun2 and Bridging within SCIRun2, CCALoop: A scalable design for a distributed component framework, and Combining Workflow methodologies with Component Architectures.

Development of high performance scientific components for interoperability of computing packages

Energy Technology Data Exchange (ETDEWEB)

Gulabani, Teena Pratap [Iowa State Univ., Ames, IA (United States)

2008-01-01

Three major high performance quantum chemistry computational packages, NWChem, GAMESS and MPQC have been developed by different research efforts following different design patterns. The goal is to achieve interoperability among these packages by overcoming the challenges caused by the different communication patterns and software design of each of these packages. A chemistry algorithm is hard to develop as well as being a time consuming process; integration of large quantum chemistry packages will allow resource sharing and thus avoid reinvention of the wheel. Creating connections between these incompatible packages is the major motivation of the proposed work. This interoperability is achieved by bringing the benefits of Component Based Software Engineering through a plug-and-play component framework called Common Component Architecture (CCA). In this thesis, I present a strategy and process used for interfacing two widely used and important computational chemistry methodologies: Quantum Mechanics and Molecular Mechanics. To show the feasibility of the proposed approach the Tuning and Analysis Utility (TAU) has been coupled with NWChem code and its CCA components. Results show that the overhead is negligible when compared to the ease and potential of organizing and coping with large-scale software applications.

Developing multi-cellular tumor spheroid model (MCTS) in the chitosan/collagen/alginate (CCA) fibrous scaffold for anticancer drug screening.

Science.gov (United States)

Wang, Jian-Zheng; Zhu, Yu-Xia; Ma, Hui-Chao; Chen, Si-Nan; Chao, Ji-Ye; Ruan, Wen-Ding; Wang, Duo; Du, Feng-guang; Meng, Yue-Zhong

2016-05-01

In this work, a 3D MCTS-CCA system was constructed by culturing multi-cellular tumor spheroid (MCTS) in the chitosan/collagen/alginate (CCA) fibrous scaffold for anticancer drug screening. The CCA scaffolds were fabricated by spray-spinning. The interactions between the components of the spray-spun fibers were evidenced by methods of Coomassie Blue stain, X-ray diffraction (XRD) and Fourier transform-infrared spectroscopy (FTIR). Co-culture indicated that MCF-7 cells showed a spatial growth pattern of multi-cellular tumor spheroid (MCTS) in the CCA fibrous scaffold with increased proliferation rate and drug-resistance to MMC, ADM and 5-Aza comparing with the 2D culture cells. Significant increases of total viable cells were found in 3D MCTS groups after drug administration by method of apoptotic analysis. Glucose-lactate analysis indicated that the metabolism of MCTS in CCA scaffold was closer to the tumor issue in vivo than the monolayer cells. In addition, MCTS showed the characteristic of epithelial mesenchymal transition (EMT) which is subverted by carcinoma cells to facilitate metastatic spread. These results demonstrated that MCTS in CCA scaffold possessed a more conservative phenotype of tumor than monolayer cells, and anticancer drug screening in 3D MCTS-CCA system might be superior to the 2D culture system. Copyright © 2016 Elsevier B.V. All rights reserved.

A Component Approach to Collaborative Scientific Software Development: Tools and Techniques Utilized by the Quantum Chemistry Science Application Partnership

Directory of Open Access Journals (Sweden)

Joseph P. Kenny

2008-01-01

Full Text Available Cutting-edge scientific computing software is complex, increasingly involving the coupling of multiple packages to combine advanced algorithms or simulations at multiple physical scales. Component-based software engineering (CBSE has been advanced as a technique for managing this complexity, and complex component applications have been created in the quantum chemistry domain, as well as several other simulation areas, using the component model advocated by the Common Component Architecture (CCA Forum. While programming models do indeed enable sound software engineering practices, the selection of programming model is just one building block in a comprehensive approach to large-scale collaborative development which must also address interface and data standardization, and language and package interoperability. We provide an overview of the development approach utilized within the Quantum Chemistry Science Application Partnership, identifying design challenges, describing the techniques which we have adopted to address these challenges and highlighting the advantages which the CCA approach offers for collaborative development.

Cloud Based Big Data Infrastructure: Architectural Components and Automated Provisioning

OpenAIRE

Demchenko, Yuri; Turkmen, Fatih; Blanchet, Christophe; Loomis, Charles; Laat, Caees de

2016-01-01

This paper describes the general architecture and functional components of the cloud based Big Data Infrastructure (BDI). The proposed BDI architecture is based on the analysis of the emerging Big Data and data intensive technologies and supported by the definition of the Big Data Architecture Framework (BDAF) that defines the following components of the Big Data technologies: Big Data definition, Data Management including data lifecycle and data structures, Big Data Infrastructure (generical...

The Component-Based Application for GAMESS

Energy Technology Data Exchange (ETDEWEB)

Peng, Fang [Iowa State Univ., Ames, IA (United States)

2007-01-01

GAMESS, a quantum chetnistry program for electronic structure calculations, has been freely shared by high-performance application scientists for over twenty years. It provides a rich set of functionalities and can be run on a variety of parallel platforms through a distributed data interface. While a chemistry computation is sophisticated and hard to develop, the resource sharing among different chemistry packages will accelerate the development of new computations and encourage the cooperation of scientists from universities and laboratories. Common Component Architecture (CCA) offers an enviromnent that allows scientific packages to dynamically interact with each other through components, which enable dynamic coupling of GAMESS with other chetnistry packages, such as MPQC and NWChem. Conceptually, a cotnputation can be constructed with "plug-and-play" components from scientific packages and require more than componentizing functions/subroutines of interest, especially for large-scale scientific packages with a long development history. In this research, we present our efforts to construct cotnponents for GAMESS that conform to the CCA specification. The goal is to enable the fine-grained interoperability between three quantum chemistry programs, GAMESS, MPQC and NWChem, via components. We focus on one of the three packages, GAMESS; delineate the structure of GAMESS computations, followed by our approaches to its component development. Then we use GAMESS as the driver to interoperate integral components from the other tw"o packages, arid show the solutions for interoperability problems along with preliminary results. To justify the versatility of the design, the Tuning and Analysis Utility (TAU) components have been coupled with GAMESS and its components, so that the performance of GAMESS and its components may be analyzed for a wide range of systetn parameters.

Extractive decontamination of heavy metals from CCA contaminated ...

African Journals Online (AJOL)

In this paper, the mobilization and extraction of As, Cr and Cu from chromated copper arsenate (CCA) contaminated soil obtained from a wood treatment factory site by four organic acids are presented and discussed. The CCA contaminated soil (pH = 5.91, carbon = 0.32, CEC = 47.84 meq/100 g) was found to contain 39.55 ...

Utility poles not affected by CCA decision

Energy Technology Data Exchange (ETDEWEB)

De Venzio, H. [Arch Wood Protection Canada, Mississauga, ON (Canada)

2002-08-01

A voluntary decision by industry to move non-industrial use of treated lumber products away from pressure-treated wood containing chromated copper arsenate (CCA) preservative was announced by the Environmental Protection Agency on February 12, 2002. Although new alternative wood preservatives would be used, this decision does not affect utility poles, which will continue to be sold and installed. The author provides a brief historical outline concerning the creation of CCA in 1933 and its subsequent uses. CCA has many advantages, including clean surface of the poles, ground line treatment that is not required thus eliminating the requirement to rotate the poles during extended storage periods. Conductivity is low, as is corrosivity without affecting the bending characteristics of the wood. The injection of a refined hydrocarbon oil emulsion in the outer layer of the pole after the treatment with CCA is offered by some pole producers to facilitate gaff penetration. Sawing, drilling and nailing are also made easier. Water repellents can be added to the treating solution to improve climbability, slowing down the absorption and release of moisture. Warranties, extending for 50-year periods, are offered by some companies against wood-destroying organisms. The North American Wood Pole Coalition (NAWPC) was formed in 1998 to promote the use of wood poles, and publishes brochures and technical bulletins to that effect.

Caracterización de las cibercomunidades de aprendizaje (cCA

Directory of Open Access Journals (Sweden)

Iñaki Murua Anzola

2015-01-01

Full Text Available En este artículo se presentan los principales resultados de la investigación exploratoria llevada a cabo sobre las cibercomunidades de aprendizaje (cCA y la formación del profesorado aplicando , entre otros, el método Delphi; e l marco teórico y contextual de la misma se presentó en el número 43 de la revista RED. Los participantes de l panel de expertos han sido 31 encuestados online con el instrumento Delphi - cCA, y 19 respo nsables de comunidades que han contestado al cuestionario - cCA. Entre los principales resultados se destacan las condiciones para la creación y desarrollo de cCA, las herramientas y funcionalidades de las comunidades y las tipologías de participación ( perso nas implicadas, activas, pasivas y ausentes.

RAGE Architecture for Reusable Serious Gaming Technology Components

Directory of Open Access Journals (Sweden)

Wim van der Vegt

2016-01-01

Full Text Available For seizing the potential of serious games, the RAGE project—funded by the Horizon-2020 Programme of the European Commission—will make available an interoperable set of advanced technology components (software assets that support game studios at serious game development. This paper describes the overall software architecture and design conditions that are needed for the easy integration and reuse of such software assets in existing game platforms. Based on the component-based software engineering paradigm the RAGE architecture takes into account the portability of assets to different operating systems, different programming languages, and different game engines. It avoids dependencies on external software frameworks and minimises code that may hinder integration with game engine code. Furthermore it relies on a limited set of standard software patterns and well-established coding practices. The RAGE architecture has been successfully validated by implementing and testing basic software assets in four major programming languages (C#, C++, Java, and TypeScript/JavaScript, resp.. Demonstrator implementation of asset integration with an existing game engine was created and validated. The presented RAGE architecture paves the way for large scale development and application of cross-engine reusable software assets for enhancing the quality and diversity of serious gaming.

Mechanical and chemical properties of CCA-treated lumber removed from spent residential decks

Science.gov (United States)

Robert L. Smith; David Bailey; Philip A. Araman

2007-01-01

The amount of chromated copper arsenate (CCA)- treated wood being removed from spent residential decks is increasing at a tremendous rate. While most spent CCA-treated wood is being disposed in landfills, further useful and environmentally beneficial alternatives have to be met. If the volume of CCA-treated wood reaching landfills continues to rise, stricter disposal...

A CORBA BASED ARCHITECTURE FOR ACCESSING REUSABLE SOFTWARE COMPONENTS ON THE WEB.

Directory of Open Access Journals (Sweden)

R. Cenk ERDUR

2003-01-01

Full Text Available In a very near future, as a result of the continious growth of Internet and advances in networking technologies, Internet will become the common software repository for people and organizations who employ component based reuse approach in their software development life cycles. In order to use the reusable components such as source codes, analysis, designs, design patterns during new software development processes, environments that support the identification of the components over Internet are needed. Basic elements of such an environment are the coordinator programs which deliver user requests to appropriate component libraries, user interfaces for querying, and programs that wrap the component libraries. First, a CORBA based architecture is proposed for such an environment. Then, an alternative architecture that is based on the Java 2 platform technologies is given for the same environment. Finally, the two architectures are compared.

Carcinogenic risk of chromium, copper and arsenic in CCA-treated wood

International Nuclear Information System (INIS)

Ohgami, Nobutaka; Yamanoshita, Osamu; Thang, Nguyen Dinh; Yajima, Ichiro; Nakano, Chihiro; Wenting, Wu; Ohnuma, Shoko

2015-01-01

We showed that 2.1% of 233 pieces of lumber debris after the Great East Japan Earthquake was chromated copper arsenate (CCA)-treated wood. Since hexavalent chromium (Cr), copper (Cu) and pentavalent arsenic (As) in the debris may be diffused in the air via incineration, we exposed human lung normal (BEAS-2B) and carcinoma (A549) cells to Cr, Cu and As at the molar ratio in a representative CCA-treated wood. Co-exposure to 0.10 μM Cr and 0.06 μM As, which solely had no effect on colony formation, synergistically promoted colony formation in BEAS-2B cells, but not A549 cells, with activation of the PI3K/AKT pathway. Sole exposure and co-exposure to Cu showed limited effects. Since previous reports showed Cr and As concentrations to which human lungs might be exposed, our results suggest the importance to avoid diffusion of Cr and As in the air via incineration of debris including CCA-treated wood after the disaster. - Highlights: • CCA-treated wood was found in debris after the Great East Japan Earthquake in 2011. • Carcinogenic risk of CCA-treated woods was evaluated with human lung cell lines. • Co-exposure to Cr and As synergistically promoted colony formation. • Co-exposure to Cr and As synergistically activated the PI3/AKT pathway. • Effects of sole exposure and co-exposure to Cu on colony formation were limited. - Co-exposure to Cr and As, but not Cu, in CCA-treated wood debris from the Great East Japan Earthquake showed carcinogenicity in vitro.

REMOVAL COPPER, CHROMIUM, ARSENIC FROM OUT-OF- SERVICE CCA-TREATED WOOD MATERIALS

Directory of Open Access Journals (Sweden)

Engin Derya Gezer

2004-11-01

Full Text Available Remediation can be defined as removing copper, chromium and arsenic from out-of-service CCA treated wood products. There are some various remediation methods that can be applied to remove copper, chromium and arsenic from out-of service CCA treated wood products in order to re-use that wooden materials and minimize adverse impacts of those out-of service CCA treated wood to environment, human health, animals and other living organisms. In this study, those applied various remediation methods to remove copper, chromium and arsenic were summarized.

Component Architectures and Web-Based Learning Environments

Science.gov (United States)

Ferdig, Richard E.; Mishra, Punya; Zhao, Yong

2004-01-01

The Web has caught the attention of many educators as an efficient communication medium and content delivery system. But we feel there is another aspect of the Web that has not been given the attention it deserves. We call this aspect of the Web its "component architecture." Briefly it means that on the Web one can develop very complex…

Lifecycle Prognostics Architecture for Selected High-Cost Active Components

Energy Technology Data Exchange (ETDEWEB)

N. Lybeck; B. Pham; M. Tawfik; J. B. Coble; R. M. Meyer; P. Ramuhalli; L. J. Bond

2011-08-01

There are an extensive body of knowledge and some commercial products available for calculating prognostics, remaining useful life, and damage index parameters. The application of these technologies within the nuclear power community is still in its infancy. Online monitoring and condition-based maintenance is seeing increasing acceptance and deployment, and these activities provide the technological bases for expanding to add predictive/prognostics capabilities. In looking to deploy prognostics there are three key aspects of systems that are presented and discussed: (1) component/system/structure selection, (2) prognostic algorithms, and (3) prognostics architectures. Criteria are presented for component selection: feasibility, failure probability, consequences of failure, and benefits of the prognostics and health management (PHM) system. The basis and methods commonly used for prognostics algorithms are reviewed and summarized. Criteria for evaluating PHM architectures are presented: open, modular architecture; platform independence; graphical user interface for system development and/or results viewing; web enabled tools; scalability; and standards compatibility. Thirteen software products were identified and discussed in the context of being potentially useful for deployment in a PHM program applied to systems in a nuclear power plant (NPP). These products were evaluated by using information available from company websites, product brochures, fact sheets, scholarly publications, and direct communication with vendors. The thirteen products were classified into four groups of software: (1) research tools, (2) PHM system development tools, (3) deployable architectures, and (4) peripheral tools. Eight software tools fell into the deployable architectures category. Of those eight, only two employ all six modules of a full PHM system. Five systems did not offer prognostic estimates, and one system employed the full health monitoring suite but lacked operations and

Lifecycle Prognostics Architecture for Selected High-Cost Active Components

International Nuclear Information System (INIS)

Lybeck, N.; Pham, B.; Tawfik, M.; Coble, J.B.; Meyer, R.M.; Ramuhalli, P.; Bond, L.J.

2011-01-01

There are an extensive body of knowledge and some commercial products available for calculating prognostics, remaining useful life, and damage index parameters. The application of these technologies within the nuclear power community is still in its infancy. Online monitoring and condition-based maintenance is seeing increasing acceptance and deployment, and these activities provide the technological bases for expanding to add predictive/prognostics capabilities. In looking to deploy prognostics there are three key aspects of systems that are presented and discussed: (1) component/system/structure selection, (2) prognostic algorithms, and (3) prognostics architectures. Criteria are presented for component selection: feasibility, failure probability, consequences of failure, and benefits of the prognostics and health management (PHM) system. The basis and methods commonly used for prognostics algorithms are reviewed and summarized. Criteria for evaluating PHM architectures are presented: open, modular architecture; platform independence; graphical user interface for system development and/or results viewing; web enabled tools; scalability; and standards compatibility. Thirteen software products were identified and discussed in the context of being potentially useful for deployment in a PHM program applied to systems in a nuclear power plant (NPP). These products were evaluated by using information available from company websites, product brochures, fact sheets, scholarly publications, and direct communication with vendors. The thirteen products were classified into four groups of software: (1) research tools, (2) PHM system development tools, (3) deployable architectures, and (4) peripheral tools. Eight software tools fell into the deployable architectures category. Of those eight, only two employ all six modules of a full PHM system. Five systems did not offer prognostic estimates, and one system employed the full health monitoring suite but lacked operations and

Evaluation of Strength Characteristics of Laterized Concrete with Corn Cob Ash (CCA) Blended Cement

Science.gov (United States)

Ikponmwosa, E. E.; Salau, M. A.; Kaigama, W. B.

2015-11-01

Agricultural wastes are dumped in landfills or left on land in which they constitute nuisance. This study presents the results of investigation of strength characteristics of reinforced laterized concrete beams with cement partially replaced with corn cob (agricultural wastes) ash (CCA). Laterized concrete specimen of 25% laterite and 75% sharp sand were made by blending cement with corn cob ash at 0 to 40% in steps of 10%. A concrete mix ratio of 1:2:4 was used to cast 54 cubes of 150×150×150mm size and 54 beams of dimension 750×150×150mm. The results show that the consistency and setting time of cement increased as the percentage replacement of cement with CCA increased while the workability and density of concrete decreased as the percentage of CCA increased. There was a decrease in compressive strength when laterite was introduced to the concrete from 25.04 to 22.96N/mm2 after 28 days and a continual reduction in strength when CCA was further added from 10% to 40% at steps of 10%. Generally, the beam specimens exhibited majorly shear failure with visible diagonal cracks extending from support points to the load points. The corresponding central deflection in beams, due to two points loading, increased as the laterite was added to the concrete mix but reduced and almost approaching that of the control as 10% CCA was added. The deflection then increased as the CCA content further increased to 20%, 30% and 40% in the mix. It was also noted that the deflection of all percentage replacement including 40% CCA is less than the standard recommended maximum deflection of the beam. The optimal flexural strength occurred with 10% CCA content.

The common component architecture for particle accelerator simulations

International Nuclear Information System (INIS)

Dechow, D.R.; Norris, B.; Amundson, J.

2007-01-01

Synergia2 is a beam dynamics modeling and simulation application for high-energy accelerators such as the Tevatron at Fermilab and the International Linear Collider, which is now under planning and development. Synergia2 is a hybrid, multilanguage software package comprised of two separate accelerator physics packages (Synergia and MaryLie/Impact) and one high-performance computer science package (PETSc). We describe our approach to producing a set of beam dynamics-specific software components based on the Common Component Architecture specification. Among other topics, we describe particular experiences with the following tasks: using Python steering to guide the creation of interfaces and to prototype components; working with legacy Fortran codes; and an example component-based, beam dynamics simulation.

Impact of chromated copper arsenate (CCA) in wood mulch.

Science.gov (United States)

Townsend, Timothy G; Solo-Gabriele, Helena; Tolaymat, Thabet; Stook, Kristin

2003-06-20

The production of landscape mulch is a major market for the recycling of yard trash and waste wood. When wood recovered from construction and demolition (C&D) debris is used as mulch, it sometimes contains chromated copper arsenate (CCA)-treated wood. The presence of CCA-treated wood may cause some potential environmental problems as a result of the chromium, copper, and arsenic present. Research was performed to examine the leachability of the three metals from a variety of processed wood mixtures in Florida. The mixtures tested included mixed wood from C&D debris recycling facilities and mulch purchased from retail outlets. The synthetic precipitation leaching procedure (SPLP) was performed to examine the leaching of chromium, copper and arsenic. Results were compared to Florida's groundwater cleanup target levels (GWCTLs). Eighteen of the 22 samples collected from C&D debris processing facilities leached arsenic at concentrations greater than Florida's GWCTL of 50 microg/l. The mean leachable arsenic concentration for the C&D debris samples was 153 microg/l with a maximum of 558 microg/l. One of the colored mulch samples purchased from a retail outlet leached arsenic above 50 microg/l, while purchased mulch samples derived from virgin materials did not leach detectable arsenic (<5 microg/l). A mass balance approach was used to compute the potential metal concentrations (mg/kg) that would result from CCA-treated wood being present in wood mulch. Less than 0.1% CCA-treated wood would cause a mulch to exceed Florida's residential clean soil guideline for arsenic (0.8 mg/kg).

Judicious use of custom development in an open source component architecture

Science.gov (United States)

Bristol, S.; Latysh, N.; Long, D.; Tekell, S.; Allen, J.

2014-12-01

Modern software engineering is not as much programming from scratch as innovative assembly of existing components. Seamlessly integrating disparate components into scalable, performant architecture requires sound engineering craftsmanship and can often result in increased cost efficiency and accelerated capabilities if software teams focus their creativity on the edges of the problem space. ScienceBase is part of the U.S. Geological Survey scientific cyberinfrastructure, providing data and information management, distribution services, and analysis capabilities in a way that strives to follow this pattern. ScienceBase leverages open source NoSQL and relational databases, search indexing technology, spatial service engines, numerous libraries, and one proprietary but necessary software component in its architecture. The primary engineering focus is cohesive component interaction, including construction of a seamless Application Programming Interface (API) across all elements. The API allows researchers and software developers alike to leverage the infrastructure in unique, creative ways. Scaling the ScienceBase architecture and core API with increasing data volume (more databases) and complexity (integrated science problems) is a primary challenge addressed by judicious use of custom development in the component architecture. Other data management and informatics activities in the earth sciences have independently resolved to a similar design of reusing and building upon established technology and are working through similar issues for managing and developing information (e.g., U.S. Geoscience Information Network; NASA's Earth Observing System Clearing House; GSToRE at the University of New Mexico). Recent discussions facilitated through the Earth Science Information Partners are exploring potential avenues to exploit the implicit relationships between similar projects for explicit gains in our ability to more rapidly advance global scientific cyberinfrastructure.

Efficient KDM-CCA Secure Public-Key Encryption via Auxiliary-Input Authenticated Encryption

Directory of Open Access Journals (Sweden)

Shuai Han

2017-01-01

Full Text Available KDM[F]-CCA security of public-key encryption (PKE ensures the privacy of key-dependent messages f(sk which are closely related to the secret key sk, where f∈F, even if the adversary is allowed to make decryption queries. In this paper, we study the design of KDM-CCA secure PKE. To this end, we develop a new primitive named Auxiliary-Input Authenticated Encryption (AIAE. For AIAE, we introduce two related-key attack (RKA security notions, including IND-RKA and weak-INT-RKA. We present a generic construction of AIAE from tag-based hash proof system (HPS and one-time secure authenticated encryption (AE and give an instantiation of AIAE under the Decisional Diffie-Hellman (DDH assumption. Using AIAE as an essential building block, we give two constructions of efficient KDM-CCA secure PKE based on the DDH and the Decisional Composite Residuosity (DCR assumptions. Specifically, (i our first PKE construction is the first one achieving KDM[Faff]-CCA security for the set of affine functions and compactness of ciphertexts simultaneously. (ii Our second PKE construction is the first one achieving KDM[Fpolyd]-CCA security for the set of polynomial functions and almost compactness of ciphertexts simultaneously. Our PKE constructions are very efficient; in particular, they are pairing-free and NIZK-free.

Development of x-ray laser architectural components

International Nuclear Information System (INIS)

Wan, A.S.; Da Silva, L.B.; Moreno, J.C.

1994-06-01

This paper describes the recent experimental and computational development of short-pulse, enhanced-coherence, and high-brilliance x-ray lasers (XRLs). The authors will describe the development of an XRL cavity by injecting laser photons back into an amplifying XRL plasma. Using a combination of LASNEX/GLF/SPECTRE-BEAM3 codes, they obtained good agreement with experimental results. They will describe the adaptive spatial filtering technique used to design small-aperture shaped XRLs with near diffraction-limited output. Finally they will discuss issues concerning the development of high-brilliance XRL architecture, with emphasis on scaling the XRL aperture. Combining these advances in XRL architectural components allows them to develop a short-pulse, high-brilliance, coherent XRL suitable for applications in areas such as biological holography, plasma interferometry, and nonlinear optics

Physical and mechanical properties of flakeboard produced from recycled CCA-treated wood

Science.gov (United States)

W. Li; T.F. Shupe; Chung-Yun Hse

2004-01-01

Chromated copper arsenate (CCA) treated wood has been most widely used in North America since the 1970s for many exterior applications such as decks, fences, playground equipment, utility poles, and others. A large volume of CCA-treated wood is currently coming out of service. Traditional disposal methods such as landfilling and incineration are not without adverse...

Finishability of CCA pressure-treated wood

Science.gov (United States)

Alan Ross; Richard Carlson; William Feist; Steven Bussjaeger

2000-01-01

Thus, a need arose for the development of surface finishes for CCA-treated wood that could address the special requirements of this substrate and provide protection against the ravages of water, sunlight, mildew, and other aspects of weathering and wear. Initially, this need was not addressed, most wood preserving companies had little expertise in surface finishes and...

Fractionation of heavy metals in liquefied chromated copper arsenate (CCA)-treated wood sludge using a modified BCR-sequential extraction procedure

Science.gov (United States)

Hui Pan; Chung-Yun Hse; Robert Gambrell; Todd F. Shupe

2009-01-01

Chromated copper arsenate (CCA)-treated wood was liquefied with polyethylene glycol/glycerin and sulfuric acid. After liquefaction, most CCA metals (98% As, 92% Cr, and 83% Cu) were removed from liquefied CCA-treated wood by precipitation with calcium hydroxide. The original CCA-treated wood and liquefied CCA-treated wood sludge were fractionated by a modified...

Evaluation of commercial landscaping mulch for possible contamination from CCA.

Science.gov (United States)

Jacobi, Gary; Solo-Gabriele, Helena; Dubey, Brajesh; Townsend, Timothy; Shibata, Tomoyuki

2007-01-01

Wood treated with chromated copper arsenate (CCA) is found in construction and demolition (C&D) debris, and a common use for wood recycled from C&D debris is the production of mulch. Given the high metals concentrations in CCA-treated wood, a small fraction of CCA-treated wood can increase the metal concentrations in the mulch above regulatory thresholds. The objective of this study was to determine the extent of contamination of CCA-treated wood in consumer landscaping mulch and to determine whether visual methods or rapid X-ray fluorescence (XRF) technology can be used to identify suspect mulch. Samples were collected throughout the State of Florida (USA) and evaluated both visually and chemically. Visual analysis focused on documenting wood-chip size distribution, whether the samples were artificially colored, and whether they contained plywood chips which is an indication that the sample was, in part, made from recycled C&D wood. Chemical analysis included measurements of total recoverable metals, leachable metals as per the standardized synthetic precipitation leaching procedure (SPLP), and XRF analysis. Visual identification methods, such as colorant addition or presence of plywood, were found effective to preliminarily screen suspect mulch. XRF analysis was found to be effective for identifying mulch containing higher than 75 mg/kg arsenic. For mulch samples that were not colored and did not contain evidence of C&D wood, none exceeded leachable metal concentrations of 50 microg/L and only 3% exceeded 10 mg/kg for recoverable metals. The majority of the colored mulch made from recycled C&D wood contained from 1% to 5% CCA-treated wood (15% maximum fraction) resulting in leachable metals in excess of 50 microg/L and total recoverable metals in excess of 10 mg/kg. The maximum arsenic concentration measured in the mulch samples evaluated was 230 mg/kg, which was above the Florida residential direct exposure regulatory guideline of 2.1 mg/kg.

Service oriented architecture assessment based on software components

Directory of Open Access Journals (Sweden)

Mahnaz Amirpour

2016-01-01

Full Text Available Enterprise architecture, with detailed descriptions of the functions of information technology in the organization, tries to reduce the complexity of technology applications resulting in tools with greater efficiency in achieving the objectives of the organization. Enterprise architecture consists of a set of models describing this technology in different components performance as well as various aspects of the applications in any organization. Therefore, information technology development and maintenance management can perform well within organizations. This study aims to suggest a method to identify different types of services in service-oriented architecture analysis step that applies some previous approaches in an integrated form and, based on the principles of software engineering, to provide a simpler and more transparent approach through the expression of analysis details. Advantages and disadvantages of proposals should be evaluated before the implementation and costs allocation. Evaluation methods can better identify strengths and weaknesses of the current situation apart from selecting appropriate model out of several suggestions, and clarify this technology development solution for organizations in the future. We will be able to simulate data and processes flow within the organization by converting the output of the model to colored Petri nets and evaluate and test it by examining various inputs to enterprise architecture before implemented in terms of reliability and response time. A model of application has been studied for the proposed model and the results can describe and design architecture for data.

Modeling Banking, Sovereign, and Macro Risk in a CCA Global VAR

OpenAIRE

Dale F. Gray

2013-01-01

The purpose of this paper is to develop a model framework for the analysis of interactions between banking sector risk, sovereign risk, corporate sector risk, real economic activity, and credit growth for 15 European countries and the United States. It is an integrated macroeconomic systemic risk model framework that draws on the advantages of forward-looking contingent claims analysis (CCA) risk indicators for the banking systems in each country, forward-looking CCA risk indicators for sover...

Transgenic plants expressing GLK1 and CCA1 having increased nitrogen assimilation capacity

Science.gov (United States)

Coruzzi, Gloria [New York, NY; Gutierrez, Rodrigo A [Santiago, CL; Nero, Damion C [Woodside, NY

2012-04-10

Provided herein are compositions and methods for producing transgenic plants. In specific embodiments, transgenic plants comprise a construct comprising a polynucleotide encoding CCA1, GLK1 or bZIP1, operably linked to a plant-specific promote, wherein the CCA1, GLK1 or bZIP1 is ectopically overexpressed in the transgenic plants, and wherein the promoter is optionally a constitutive or inducible promoter. In other embodiments, transgenic plants in which express a lower level of CCA1, GLK1 or bZIP1 are provided. Also provided herein are commercial products (e.g., pulp, paper, paper products, or lumber) derived from the transgenic plants (e.g., transgenic trees) produced using the methods provided herein.

A component architecture for the two-phase flows simulation system Neptune

Energy Technology Data Exchange (ETDEWEB)

Bechaud, C; Boucker, M; Douce, A [Electricite de France (EDF-RD/MFTT), 78 - Chatou (France); Grandotto, M [CEA Cadarache (DEN/DTP/STH), 13 - Saint-Paul-lez-Durance (France); Tajchman, M [CEA Saclay (DEN/DM2S/SFME), 91 - Gif-sur-Yvette (France)

2003-07-01

Electricite de France (EdF) and the French atomic energy commission (Cea) have planed a large project to build a new set of software in nuclear reactors analysis. One of the main idea is to allow coupled calculations in which several scientific domains are involved. This paper presents the software architecture of the two-phase flows simulation Neptune project. Neptune should allow computations of two-phase flows in 3 dimensions under normal operating conditions as well as safety conditions. Three scales are identified: the local scale where there is only homogenization between the two phases, an intermediate scale where solid internal structures are homogenized with the fluid and the system scale where some parts of the geometry under study are considered point-wise or subject to one dimensional simplifications. The main properties of this architecture are as follow: -) coupling with scientific domains, and between different scales, -) re-using of quite all or parts of existing validated codes, -) components usable by the different scales, -) easy introducing of new physical modeling as well as new numerical methods, -) local, distributed and parallel computing. The Neptune architecture is based on the component concept with stable and well suited interface. In the case of a distributed application the components are managed through a Corba bus. The building of the components is organized in shell: a programming shell (Fortran or C++ routines), a managing shell (C++ language), an interpreted shell (Python language), a Corba shell and a global driving shell (C++ or Python). Neptune will use the facilities offered by the Salome project: pre and post processors and controls. A data model has been built to have a common access to the information exchanged between the components (meshes, fields, physical and technical information). This architecture has first been setup and tested on some simple but significant cases and is now currently in use to build the Neptune

A component architecture for the two-phase flows simulation system Neptune

International Nuclear Information System (INIS)

Bechaud, C.; Boucker, M.; Douce, A.; Grandotto, M.; Tajchman, M.

2003-01-01

Electricite de France (EdF) and the French atomic energy commission (Cea) have planed a large project to build a new set of software in nuclear reactors analysis. One of the main idea is to allow coupled calculations in which several scientific domains are involved. This paper presents the software architecture of the two-phase flows simulation Neptune project. Neptune should allow computations of two-phase flows in 3 dimensions under normal operating conditions as well as safety conditions. Three scales are identified: the local scale where there is only homogenization between the two phases, an intermediate scale where solid internal structures are homogenized with the fluid and the system scale where some parts of the geometry under study are considered point-wise or subject to one dimensional simplifications. The main properties of this architecture are as follow: -) coupling with scientific domains, and between different scales, -) re-using of quite all or parts of existing validated codes, -) components usable by the different scales, -) easy introducing of new physical modeling as well as new numerical methods, -) local, distributed and parallel computing. The Neptune architecture is based on the component concept with stable and well suited interface. In the case of a distributed application the components are managed through a Corba bus. The building of the components is organized in shell: a programming shell (Fortran or C++ routines), a managing shell (C++ language), an interpreted shell (Python language), a Corba shell and a global driving shell (C++ or Python). Neptune will use the facilities offered by the Salome project: pre and post processors and controls. A data model has been built to have a common access to the information exchanged between the components (meshes, fields, physical and technical information). This architecture has first been setup and tested on some simple but significant cases and is now currently in use to build the Neptune

Accuracy of urine circulating cathodic antigen (CCA test for Schistosoma mansoni diagnosis in different settings of Côte d'Ivoire.

Directory of Open Access Journals (Sweden)

Jean T Coulibaly

2011-11-01

Full Text Available BACKGROUND: Promising results have been reported for a urine circulating cathodic antigen (CCA test for the diagnosis of Schistosoma mansoni. We assessed the accuracy of a commercially available CCA cassette test (designated CCA-A and an experimental formulation (CCA-B for S. mansoni diagnosis. METHODOLOGY: We conducted a cross-sectional survey in three settings of Côte d'Ivoire: settings A and B are endemic for S. mansoni, whereas S. haematobium co-exists in setting C. Overall, 446 children, aged 8-12 years, submitted multiple stool and urine samples. For S. mansoni diagnosis, stool samples were examined with triplicate Kato-Katz, whereas urine samples were tested with CCA-A. The first stool and urine samples were additionally subjected to an ether-concentration technique and CCA-B, respectively. Urine samples were examined for S. haematobium using a filtration method, and for microhematuria using Hemastix dipsticks. PRINCIPAL FINDINGS: Considering nine Kato-Katz as diagnostic 'gold' standard, the prevalence of S. mansoni in setting A, B and C was 32.9%, 53.1% and 91.8%, respectively. The sensitivity of triplicate Kato-Katz from the first stool and a single CCA-A test was 47.9% and 56.3% (setting A, 73.9% and 69.6% (setting B, and 94.2% and 89.6% (setting C. The respective sensitivity of a single CCA-B was 10.4%, 29.9% and 75.0%. The ether-concentration technique showed a low sensitivity for S. mansoni diagnosis (8.3-41.0%. The specificity of CCA-A was moderate (76.9-84.2%; CCA-B was high (96.7-100%. The likelihood of a CCA-A color reaction increased with higher S. mansoni fecal egg counts (odds ratio: 1.07, p<0.001. A concurrent S. haematobium infection or the presence of microhematuria did not influence the CCA-A test results for S. mansoni diagnosis. CONCLUSION/SIGNIFICANCE: CCA-A showed similar sensitivity than triplicate Kato-Katz for S. mansoni diagnosis with no cross-reactivity to S. haematobium and microhematuria. The low sensitivity

The functional interplay between protein kinase CK2 and CCA1 transcriptional activity is essential for clock temperature compensation in Arabidopsis.

Directory of Open Access Journals (Sweden)

Sergi Portolés

2010-11-01

Full Text Available Circadian rhythms are daily biological oscillations driven by an endogenous mechanism known as circadian clock. The protein kinase CK2 is one of the few clock components that is evolutionary conserved among different taxonomic groups. CK2 regulates the stability and nuclear localization of essential clock proteins in mammals, fungi, and insects. Two CK2 regulatory subunits, CKB3 and CKB4, have been also linked with the Arabidopsis thaliana circadian system. However, the biological relevance and the precise mechanisms of CK2 function within the plant clockwork are not known. By using ChIP and Double-ChIP experiments together with in vivo luminescence assays at different temperatures, we were able to identify a temperature-dependent function for CK2 modulating circadian period length. Our study uncovers a previously unpredicted mechanism for CK2 antagonizing the key clock regulator CIRCADIAN CLOCK-ASSOCIATED 1 (CCA1. CK2 activity does not alter protein accumulation or subcellular localization but interferes with CCA1 binding affinity to the promoters of the oscillator genes. High temperatures enhance the CCA1 binding activity, which is precisely counterbalanced by the CK2 opposing function. Altering this balance by over-expression, mutation, or pharmacological inhibition affects the temperature compensation profile, providing a mechanism by which plants regulate circadian period at changing temperatures. Therefore, our study establishes a new model demonstrating that two opposing and temperature-dependent activities (CCA1-CK2 are essential for clock temperature compensation in Arabidopsis.

Electrochemical removal of CU, CR and AS from CCA-treated waste wood

Energy Technology Data Exchange (ETDEWEB)

Kristensen, I.V.; Ottosen, L.M.; Villumsen, A. [Dept. of Geology and Geotechnical Engineering, The Technical Univ. of Denmark, Lyngby (Denmark); Ribeiro, A.B. [Dept. of Geology and Geotechnical Engineering, The Technical Univ. of Denmark, Lyngby (Denmark)]|[Dept. de Ciencias e Engenharia do Ambiente, Faculdade de Ciencias e Tecnologia, Univ. Nova de Lisboa, Caparica (Portugal)

2001-07-01

CCA-treated waste wood poses a potential environmental problem due to the content of copper, chromium and arsenic. This paper presents the results obtained by electrodialytic remediation of CCA-treated waste wood. It is found that more than 90% Cu, and approximately 85% Cr and As was removed from the wood during the remediation. Thereby the concentration of copper in the wood is reduced from app. 426 ppm to app. 25 ppm, chromium is reduced from app. 837 ppm to app. 135 ppm and the arsenic content decreases from app. 589 ppm to app. 151 ppm. After remediation the removed metals are collected into liquids. The use of ion exchange membranes to separate the wood from the electrolytes result in a distribution of the metals after remediation that makes the collection of the metals easier, and reuse of the metals, for e.g. new CCA, may be possible. (orig.)

A Pseudoproxy-Ensemble Study of Late-Holocene Climate Field Reconstructions Using CCA

Science.gov (United States)

Amrhein, D. E.; Smerdon, J. E.

2009-12-01

Recent evaluations of late-Holocene multi-proxy reconstruction methods have used pseudoproxy experiments derived from millennial General Circulation Model (GCM) integrations. These experiments assess the performance of a reconstruction technique by comparing pseudoproxy reconstructions, which use restricted subsets of model data, against complete GCM data fields. Most previous studies have tested methodologies using different pseudoproxy noise levels, but only with single realizations for each noise classification. A more robust evaluation of performance is to create an ensemble of pseudoproxy networks with distinct sets of noise realizations and a corresponding reconstruction ensemble that can be evaluated for consistency and sensitivity to random error. This work investigates canonical correlation analysis (CCA) as a late-Holocene climate field reconstruction (CFR) technique using ensembles of pseudoproxy experiments derived from the NCAR CSM 1.4 millennial integration. Three 200-member reconstruction ensembles are computed using pseudoproxies with signal-to-noise ratios (by standard deviation) of 1, 0.5, and 0.25 and locations that approximate the spatial distribution of real-world multiproxy networks. An important component of these ensemble calculations is the independent optimization of the three CCA truncation parameters for each ensemble member. This task is accomplished using an inexpensive discrete optimization algorithm that minimizes both RMS error in the calibration interval and the number of free parameters in the reconstruction model to avoid artificial skill. Within this framework, CCA is investigated for its sensitivity to the level of noise in the pseudoproxy network and the spatial distribution of the network. Warm biases, variance losses, and validation-interval error increase with noise level and vary spatially within the reconstructed fields. Reconstruction skill, measured as grid-point correlations during the validation interval, is lowest in

Potential arsenic exposures in 25 species of zoo animals living in CCA-wood enclosures

International Nuclear Information System (INIS)

Gress, J.; Silva, E.B. da; Oliveira, L.M. de; Zhao, Di; Anderson, G.; Heard, D.; Stuchal, L.D.; Ma, L.Q.

2016-01-01

Animal enclosures are often constructed from wood treated with the pesticide chromated copper arsenate (CCA), which leaches arsenic (As) into adjacent soil during normal weathering. This study evaluated potential pathways of As exposure in 25 species of zoo animals living in CCA-wood enclosures. We analyzed As speciation in complete animal foods, dislodgeable As from CCA-wood, and As levels in enclosure soils, as well as As levels in biomarkers of 9 species of crocodilians (eggs), 4 species of birds (feathers), 1 primate species (hair), and 1 porcupine species (quills). Elevated soil As in samples from 17 enclosures was observed at 1.0–110 mg/kg, and enclosures housing threatened and endangered species had As levels higher than USEPA's risk-based Eco-SSL for birds and mammals of 43 and 46 mg/kg. Wipe samples of CCA-wood on which primates sit had dislodgeable As residues of 4.6–111 μg/100 cm 2 , typical of unsealed CCA-wood. Inorganic As doses from animal foods were estimated at 0.22–7.8 μg/kg bw/d. Some As levels in bird feathers and crocodilian eggs were higher than prior studies on wild species. However, hair from marmosets had 6.37 mg/kg As, 30-fold greater than the reference value, possibly due to their inability to methylate inorganic As. Our data suggested that elevated As in soils and dislodgeable As from CCA-wood could be important sources of As exposure for zoo animals. - Highlights: • Daily inorganic As dose from zoo animal foods was 0.22–7.8 μg/kg bw/day. • Total As concentrations in soils of zoo animal enclosures were 1.0–110 mg/kg. • Endangered zoo animals live in soils with As above USEPA Eco-SSLs for avian and mammal species. • Dislodgeable As on CCA-wood beams where primates sit was 4.6–111 μg/100 cm 2 . • Marmoset hair had 6.37 mg/kg As compared to a reference value of 0.21 mg/kg.

Potential arsenic exposures in 25 species of zoo animals living in CCA-wood enclosures

Energy Technology Data Exchange (ETDEWEB)

Gress, J. [State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Jiangsu 201146 (China); Soil and Water Science Department, University of Florida, Gainesville, FL 32611 (United States); Silva, E.B. da; Oliveira, L.M. de [Soil and Water Science Department, University of Florida, Gainesville, FL 32611 (United States); Zhao, Di [State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Jiangsu 201146 (China); Anderson, G. [Virginia Polytechnic Institute and State University, Blacksburg, VA 24061 (United States); Heard, D. [Department of Small Animal Clinical Sciences, University of Florida, Gainesville, FL 32610 (United States); Stuchal, L.D. [Center for Environmental and Human Toxicology, University of Florida, Gainesville, FL 32611 (United States); Department of Environmental and Global Health, College of Public Health and Health Professions, University of Florida, Gainesville, FL 32611 (United States); Ma, L.Q., E-mail: lqma@ufl.edu [State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Jiangsu 201146 (China); Soil and Water Science Department, University of Florida, Gainesville, FL 32611 (United States)

2016-05-01

Animal enclosures are often constructed from wood treated with the pesticide chromated copper arsenate (CCA), which leaches arsenic (As) into adjacent soil during normal weathering. This study evaluated potential pathways of As exposure in 25 species of zoo animals living in CCA-wood enclosures. We analyzed As speciation in complete animal foods, dislodgeable As from CCA-wood, and As levels in enclosure soils, as well as As levels in biomarkers of 9 species of crocodilians (eggs), 4 species of birds (feathers), 1 primate species (hair), and 1 porcupine species (quills). Elevated soil As in samples from 17 enclosures was observed at 1.0–110 mg/kg, and enclosures housing threatened and endangered species had As levels higher than USEPA's risk-based Eco-SSL for birds and mammals of 43 and 46 mg/kg. Wipe samples of CCA-wood on which primates sit had dislodgeable As residues of 4.6–111 μg/100 cm{sup 2}, typical of unsealed CCA-wood. Inorganic As doses from animal foods were estimated at 0.22–7.8 μg/kg bw/d. Some As levels in bird feathers and crocodilian eggs were higher than prior studies on wild species. However, hair from marmosets had 6.37 mg/kg As, 30-fold greater than the reference value, possibly due to their inability to methylate inorganic As. Our data suggested that elevated As in soils and dislodgeable As from CCA-wood could be important sources of As exposure for zoo animals. - Highlights: • Daily inorganic As dose from zoo animal foods was 0.22–7.8 μg/kg bw/day. • Total As concentrations in soils of zoo animal enclosures were 1.0–110 mg/kg. • Endangered zoo animals live in soils with As above USEPA Eco-SSLs for avian and mammal species. • Dislodgeable As on CCA-wood beams where primates sit was 4.6–111 μg/100 cm{sup 2}. • Marmoset hair had 6.37 mg/kg As compared to a reference value of 0.21 mg/kg.

ASSESSING CHILDREN'S EXPOSURES TO THE WOOD PRESERVATIVE CCA (CHROMATED COPPER ARSENATE) ON TREATED PLAYSETS AND DECKS

Science.gov (United States)

Concerns have been raised regarding the safety of young children contacting arsenic and chromium residues while playing on and around Chromated Copper Arsenate (CCA) treated wood playground structures and decks. Although CCA registrants voluntarily canceled treated wood for re...

Narrowing the Broader Autism Phenotype: A Study Using the Communication Checklist-Adult Version (CC-A)

Science.gov (United States)

Whitehouse, Andrew J. O.; Coon, Hilary; Miller, Judith; Salisbury, Bryanna; Bishop, Dorothy V. M.

2010-01-01

This study investigated whether the Communication Checklist-Adult (CC-A) could identify subtypes of social and communication dysfunction in autism probands and their parents. The CC-A is divided into subscales measuring linguistic ability as well as two aspects of social communication: the Pragmatic Skills subscale assesses the level of pragmatic…

A Hybrid Hardware and Software Component Architecture for Embedded System Design

Science.gov (United States)

Marcondes, Hugo; Fröhlich, Antônio Augusto

Embedded systems are increasing in complexity, while several metrics such as time-to-market, reliability, safety and performance should be considered during the design of such systems. A component-based design which enables the migration of its components between hardware and software can cope to achieve such metrics. To enable that, we define hybrid hardware and software components as a development artifact that can be deployed by different combinations of hardware and software elements. In this paper, we present an architecture for developing such components in order to construct a repository of components that can migrate between the hardware and software domains to meet the design system requirements.

Uncoupling File System Components for Bridging Legacy and Modern Storage Architectures

Science.gov (United States)

Golpayegani, N.; Halem, M.; Tilmes, C.; Prathapan, S.; Earp, D. N.; Ashkar, J. S.

2016-12-01

Long running Earth Science projects can span decades of architectural changes in both processing and storage environments. As storage architecture designs change over decades such projects need to adjust their tools, systems, and expertise to properly integrate such new technologies with their legacy systems. Traditional file systems lack the necessary support to accommodate such hybrid storage infrastructure resulting in more complex tool development to encompass all possible storage architectures used for the project. The MODIS Adaptive Processing System (MODAPS) and the Level 1 and Atmospheres Archive and Distribution System (LAADS) is an example of a project spanning several decades which has evolved into a hybrid storage architecture. MODAPS/LAADS has developed the Lightweight Virtual File System (LVFS) which ensures a seamless integration of all the different storage architectures, including standard block based POSIX compliant storage disks, to object based architectures such as the S3 compliant HGST Active Archive System, and the Seagate Kinetic disks utilizing the Kinetic Protocol. With LVFS, all analysis and processing tools used for the project continue to function unmodified regardless of the underlying storage architecture enabling MODAPS/LAADS to easily integrate any new storage architecture without the costly need to modify existing tools to utilize such new systems. Most file systems are designed as a single application responsible for using metadata to organizing the data into a tree, determine the location for data storage, and a method of data retrieval. We will show how LVFS' unique approach of treating these components in a loosely coupled fashion enables it to merge different storage architectures into a single uniform storage system which bridges the underlying hybrid architecture.

kCCA Transformation-Based Radiometric Normalization of Multi-Temporal Satellite Images

Directory of Open Access Journals (Sweden)

Yang Bai

2018-03-01

Full Text Available Radiation normalization is an essential pre-processing step for generating high-quality satellite sequence images. However, most radiometric normalization methods are linear, and they cannot eliminate the regular nonlinear spectral differences. Here we introduce the well-established kernel canonical correlation analysis (kCCA into radiometric normalization for the first time to overcome this problem, which leads to a new kernel method. It can maximally reduce the image differences among multi-temporal images regardless of the imaging conditions and the reflectivity difference. It also perfectly eliminates the impact of nonlinear changes caused by seasonal variation of natural objects. Comparisons with the multivariate alteration detection (CCA-based normalization and the histogram matching, on Gaofen-1 (GF-1 data, indicate that the kCCA-based normalization can preserve more similarity and better correlation between an image-pair and effectively avoid the color error propagation. The proposed method not only builds the common scale or reference to make the radiometric consistency among GF-1 image sequences, but also highlights the interesting spectral changes while eliminates less interesting spectral changes. Our method enables the application of GF-1 data for change detection, land-use, land-cover change detection etc.

Digital visual communications using a Perceptual Components Architecture

Science.gov (United States)

Watson, Andrew B.

1991-01-01

The next era of space exploration will generate extraordinary volumes of image data, and management of this image data is beyond current technical capabilities. We propose a strategy for coding visual information that exploits the known properties of early human vision. This Perceptual Components Architecture codes images and image sequences in terms of discrete samples from limited bands of color, spatial frequency, orientation, and temporal frequency. This spatiotemporal pyramid offers efficiency (low bit rate), variable resolution, device independence, error-tolerance, and extensibility.

A CCA+ICA based model for multi-task brain imaging data fusion and its application to schizophrenia.

Science.gov (United States)

Sui, Jing; Adali, Tülay; Pearlson, Godfrey; Yang, Honghui; Sponheim, Scott R; White, Tonya; Calhoun, Vince D

2010-05-15

Collection of multiple-task brain imaging data from the same subject has now become common practice in medical imaging studies. In this paper, we propose a simple yet effective model, "CCA+ICA", as a powerful tool for multi-task data fusion. This joint blind source separation (BSS) model takes advantage of two multivariate methods: canonical correlation analysis and independent component analysis, to achieve both high estimation accuracy and to provide the correct connection between two datasets in which sources can have either common or distinct between-dataset correlation. In both simulated and real fMRI applications, we compare the proposed scheme with other joint BSS models and examine the different modeling assumptions. The contrast images of two tasks: sensorimotor (SM) and Sternberg working memory (SB), derived from a general linear model (GLM), were chosen to contribute real multi-task fMRI data, both of which were collected from 50 schizophrenia patients and 50 healthy controls. When examining the relationship with duration of illness, CCA+ICA revealed a significant negative correlation with temporal lobe activation. Furthermore, CCA+ICA located sensorimotor cortex as the group-discriminative regions for both tasks and identified the superior temporal gyrus in SM and prefrontal cortex in SB as task-specific group-discriminative brain networks. In summary, we compared the new approach to some competitive methods with different assumptions, and found consistent results regarding each of their hypotheses on connecting the two tasks. Such an approach fills a gap in existing multivariate methods for identifying biomarkers from brain imaging data.

CSMA/CCA: A Modified CSMA/CA Protocol Mitigating the Fairness Problem for IEEE 802.11 DCF

Directory of Open Access Journals (Sweden)

Wang Xin

2006-01-01

Full Text Available Carrier sense multiple access with collision avoidance (CSMA/CA has been adopted by the IEEE 802.11 standards for wireless local area networks (WLANs. Using a distributed coordination function (DCF, the CSMA/CA protocol reduces collisions and improves the overall throughput. To mitigate fairness issues arising with CSMA/CA, we develop a modified version that we term CSMA with copying collision avoidance (CSMA/CCA. A station in CSMA/CCA contends for the shared wireless medium by employing a binary exponential backoff similar to CSMA/CA. Different from CSMA/CA, CSMA/CCA copies the contention window (CW size piggybacked in the MAC header of an overheard data frame within its basic service set (BSS and updates its backoff counter according to the new CW size. Simulations carried out in several WLAN configurations illustrate that CSMA/CCA improves fairness relative to CSMA/CA and offers considerable advantages for deployment in the 802.11-standard-based WLANs.

Arsenic, chromium, and copper leaching from CCA-treated wood and their potential impacts on landfill leachate in a tropical country.

Science.gov (United States)

Kamchanawong, S; Veerakajohnsak, C

2010-04-01

This study looks into the potential risks of arsenic, chromium, and copper leaching from disposed hardwoods treated with chromated copper arsenate (CCA) in a tropical climate. The Toxicity Characteristic Leaching Procedure (TCLP) and the Waste Extraction Test (WET) were employed to examine new CCA-treated Burseraceae and Keruing woods, weathered CCA-treated teak wood, and ash from new CCA-treated Burseraceae wood. In addition, a total of six lysimeters, measuring 2 m high and 203 mm in diameter were prepared to compare the leachate generated from the wood monofills, construction and demolition (C&D) debris landfills and municipal solid waste (MSW) landfills, containing CCA-treated Burseraceae wood. The TCLP and WET results showed that the CCA-treated Burseraceae wood leached higher metal concentrations (i.e. 9.19-17.70 mg/L, 1.14-5.89 mg/L and 4.83-23.89 mg/L for arsenic, chromium, and copper, respectively) than the CCA-treated Keruing wood (i.e. 1.74-11.34 mg/L, 0.26-3.57 mg/L and 0.82-13.64 mg/L for arsenic, chromium and copper, respectively). Ash from the CCA-treated Burseraceae wood leached significantly higher metal concentrations (i.e. 108.5-116.9 mg/L, 1522-3862 mg/L and 84.03-114.4 mg/L for arsenic, chromium and copper, respectively), making this type of ash of high concern. The lysimeter study results showed that the MSW lysimeter exhibited higher reducing conditions, more biological activities and more dissolved ions in their leachates than the wood monofill and C&D debris lysimeters. All leachates generated from the lysimeters containing the CCA-treated Burseraceae wood contained significantly higher concentrations of arsenic in comparison to those of the untreated wood: in the range of 0.53-15.7 mg/L. It can be concluded that the disposal of CCA-treated Burseraceae wood in an unlined C&D landfill or a MSW landfill has the potential to contaminate groundwater.

Leaching of CCA-treated wood: implications for waste disposal

International Nuclear Information System (INIS)

Townsend, Timothy; Tolaymat, Thabet; Solo-Gabriele, Helena; Dubey, Brajesh; Stook, Kristin; Wadanambi, Lakmini

2004-01-01

Leaching of arsenic, chromium, and copper from chromated copper arsenate (CCA)-treated wood poses possible environmental risk when disposed. Samples of un-weathered CCA-treated wood were tested using a variety of the US regulatory leaching procedures, including the toxicity characteristic leaching procedure (TCLP), synthetic precipitation leaching procedure (SPLP), extraction procedure toxicity method (EPTOX), waste extraction test (WET), multiple extraction procedure (MEP), and modifications of these procedures which utilized actual MSW landfill leachates, a construction and demolition (C and D) debris leachate, and a concrete enhanced leachate. Additional experiments were conducted to assess factors affecting leaching, such as particle size, pH, and leaching contact time. Results from the regulatory leaching tests provided similar results with the exception of the WET, which extracted greater quantities of metals. Experiments conducted using actual MSW leachate, C and D debris leachate, and concrete enhanced leachate provided results that were within the same order of magnitude as results obtained from TCLP, SPLP, and EPTOX. Eleven of 13 samples of CCA-treated dimensional lumber exceeded the US EPA's toxicity characteristic (TC) threshold for arsenic (5 mg/L). If un-weathered arsenic-treated wood were not otherwise excluded from the definition of hazardous waste, it frequently would require management as such. When extracted with simulated rainwater (SPLP), 9 of the 13 samples leached arsenic at concentrations above 5 mg/L. Metal leachability tended to increase with decreasing particle size and at pH extremes. All three metals leached above the drinking water standards thus possibly posing a potential risk to groundwater. Arsenic is a major concern from a disposal point of view with respect to ground water quality

Music recommendation according to human motion based on kernel CCA-based relationship

Science.gov (United States)

Ohkushi, Hiroyuki; Ogawa, Takahiro; Haseyama, Miki

2011-12-01

In this article, a method for recommendation of music pieces according to human motions based on their kernel canonical correlation analysis (CCA)-based relationship is proposed. In order to perform the recommendation between different types of multimedia data, i.e., recommendation of music pieces from human motions, the proposed method tries to estimate their relationship. Specifically, the correlation based on kernel CCA is calculated as the relationship in our method. Since human motions and music pieces have various time lengths, it is necessary to calculate the correlation between time series having different lengths. Therefore, new kernel functions for human motions and music pieces, which can provide similarities between data that have different time lengths, are introduced into the calculation of the kernel CCA-based correlation. This approach effectively provides a solution to the conventional problem of not being able to calculate the correlation from multimedia data that have various time lengths. Therefore, the proposed method can perform accurate recommendation of best matched music pieces according to a target human motion from the obtained correlation. Experimental results are shown to verify the performance of the proposed method.

Rapid microwave-assisted acid extraction of metals from chromated copper arsenate (CCA)-treated southern pine wood

Science.gov (United States)

Bin Yu; Chung Y. Hse; Todd F. Shupe

2009-01-01

The effects of acid concentration, reaction time, and temperature in a microwave reactor on recovery of CCA-treated wood were evaluated. Extraction of copper, chromium, and arsenic metals from chromated copper arsenate (CCA)-treated southern pine wood samples with three different acids (i.e., acetic acid, oxalic acid, and phosphoric acid) was investigated using in...

Advancing Coordination Between DRM and CCA in Integrated Flood Risk Management

DEFF Research Database (Denmark)

Jebens, Martin; Sørensen, Carlo Sass

Flood hazards in coastal regions induce risks toward lives, property, economy and the environment. In need of sustainable and holistic actions to reduce risks, these should include innovative Disaster Risk Management (DRM) and Climate Change Adaptation (CCA) measures. While differing on important...... flood events to exert pressure on the national government, and in a top-down approach the government could identify the needs among the civil society to include these in the decision-making process.......-structural measures is hampered by lack in coordination that should be improved to agree e.g. on an acceptable risk definition and to avoid duplicating efforts. To advance awareness and coordination between DRM and CCA and to improve measures, a bottom-up approach could by initiated by civil society using recent...

Evaluation of circulating cathodic antigen (CCA strip for diagnosis of urinary schistosomiasis in Hassoba school children, Afar, Ethiopia

Directory of Open Access Journals (Sweden)

Ayele B.

2008-03-01

Full Text Available A total of 206 urine samples collected from Hassoba Elementary schoolchildren, Afar, Ethiopia, a low Schistosoma haematobium endemic setting, was diagnosed to evaluate the performance of CCA strip using double references, urine filtration technique and urinalysis dipstick (Combur 10 Test® that detect schistosome eggs and blood in urine, respectively. The former was used as a gold standard reference method. Sensitivity, specificity, positive and negative predictive values for the CCA were 52%, 63.8%, 56.7% and 59% respectively, with reference to urine filtration technique whereas these parameters were 50.4%, 62.4%, 55.6% and 57.5% respectively, with reference to Combur 10 Test®. 47 S. haematobium egg-positive children were found negative by CCA strip while 38 egg-negative children were found positive by CCA strip. Moreover, among the pre-tests done in duplicate, inconsistent results were also recorded. Assays were also compared with regard to the cost of equipment and reagents, speed and simplicity of use. Though CCA strip was found to be rapid and could be performed with minimal training, it was found to be expensive (US $ 4.95 per test to use it for large-scale field use even if its diagnostic value would have been satisfactory. Further development and standardization of the CCA strip are required for its applicability for field use. It is also recommended that its cost per strip should be substantially cut down if it is to be used in poor schistosomiasis endemic countries.

Chinese adaptation of Emotion Regulation Questionnaire for Children and Adolescents (ERQ-CCA): A psychometric evaluation in Chinese children.

Science.gov (United States)

Liu, Wen; Chen, Liang; Tu, Xintian

2017-10-01

This study validated a Chinese adaptation of the Emotion Regulation Questionnaire for Children and Adolescents (ERQ-CCA), a self-report instrument that evaluates two emotion regulation (ER) strategies, based on the process model of ER. The ERQ-CCA was evaluated using a sample of 1381 Chinese children aged between 7 and 12 years. The internal consistencies of the two factors indicated adequate reliability. Confirmatory factor analysis (CFA) revealed good support as the structure proved to be identical with that of the original instrument. Multigroup CFA supported an invariant factor solution of the ERQ-CCA across several demographic variations (gender, age, registered permanent residence and migrant status) in different groups. Test-retest correlations over a 2-month period were calculated using a subsample of children (N = 70). Convergent validity was evaluated in relation to the model dimensions of the ERQ-CCA, Chinese version of the Children's Depression Inventory, and Chinese version of the Eysenck Personality Questionnaire for Children and Adolescents. Results indicated that the ERQ-CCA has generally satisfactory reliability and validity in investigating the use of two ER strategies during the middle childhood developmental period. © 2015 International Union of Psychological Science.

Narrowing the broader autism phenotype: A study using the Communication Checklist - Adult Version (CC-A)

OpenAIRE

Whitehouse, AJ; Coon, H; Miller, J; Salisbury, B; Bishop, DV

2010-01-01

This study investigated whether the Communication Checklist – Adult (CC-A) could identify subtypes of social and communication dysfunction in autism probands and their parents. The CC-A is divided into subscales measuring linguistic ability as well as two aspects of social communication: the Pragmatic Skills subscale assesses the level of pragmatic oddities (e.g., excessive talking), while the Social Engagement subscale picks up on those behaviours that reflect a more passive communication st...

A PROBABILISTIC EXPOSURE ASSESSMENT FOR CHILDREN WHO CONTACT CCA-TREATED PLAYSETS AND DECKS USING THE STOCHASTIC HUMAN EXPOSURE AND DOSE SIMULATION (SHEDS) MODEL FOR THE WOOD PRESERVATIVE EXPOSURE SCENARIO

Science.gov (United States)

The U.S. Environmental Protection Agency has conducted a probabilistic exposure and dose assessment on the arsenic (As) and chromium (Cr) components of Chromated Copper Arsenate (CCA) using the Stochastic Human Exposure and Dose Simulation model for wood preservatives (SHEDS-Wood...

Component-Level Electronic-Assembly Repair (CLEAR) System Architecture

Science.gov (United States)

Oeftering, Richard C.; Bradish, Martin A.; Juergens, Jeffrey R.; Lewis, Michael J.; Vrnak, Daniel R.

2011-01-01

This document captures the system architecture for a Component-Level Electronic-Assembly Repair (CLEAR) capability needed for electronics maintenance and repair of the Constellation Program (CxP). CLEAR is intended to improve flight system supportability and reduce the mass of spares required to maintain the electronics of human rated spacecraft on long duration missions. By necessity it allows the crew to make repairs that would otherwise be performed by Earth based repair depots. Because of practical knowledge and skill limitations of small spaceflight crews they must be augmented by Earth based support crews and automated repair equipment. This system architecture covers the complete system from ground-user to flight hardware and flight crew and defines an Earth segment and a Space segment. The Earth Segment involves database management, operational planning, and remote equipment programming and validation processes. The Space Segment involves the automated diagnostic, test and repair equipment required for a complete repair process. This document defines three major subsystems including, tele-operations that links the flight hardware to ground support, highly reconfigurable diagnostics and test instruments, and a CLEAR Repair Apparatus that automates the physical repair process.

Electrodialytic remediation of CCA treated waste wood in pilot scale

DEFF Research Database (Denmark)

Pedersen, Anne Juul; Christensen, Iben Vernegren; Ottosen, Lisbeth M.

2005-01-01

study the utility of the method Electrodialytic Remediation was demonstrated for handling of CCA treated waste wood in pilot scale. The electrodialytic remediation method, which uses a low level DC current as the cleaning agent, combines elektrokinetic movement of ions in the wood matrix with the princi......-ples of electrodialysis. It has previously been shown that it is possible to remove Cu, Cr and As from CCA treated wood using electrodialytic remediation in laboratory scale (Ribeiro et al., 2000; Kristensen et al., 2003), but until now, the method had not been studied in larger scale. The pilot scale plant used...... in this study was designed to contain up to 2 m3 wood chips. Six remediation experiments were carried out. In these experiments, the process was up-scaled stepwise by increasing the distance between the electrodes from initially 60 cm to fi-nally 150 cm. The remediation time was varied between 11 and 21 days...

CCA-treated wood disposed in landfills and life-cycle trade-offs with waste-to-energy and MSW landfill disposal.

Science.gov (United States)

Jambeck, Jenna; Weitz, Keith; Solo-Gabriele, Helena; Townsend, Timothy; Thorneloe, Susan

2007-01-01

Chromated copper arsenate (CCA)-treated wood is a preservative treated wood construction product that grew in use in the 1970s for both residential and industrial applications. Although some countries have banned the use of the product for some applications, others have not, and the product continues to enter the waste stream from construction, demolition and remodeling projects. CCA-treated wood as a solid waste is managed in various ways throughout the world. In the US, CCA-treated wood is disposed primarily within landfills; however some of the wood is combusted in waste-to-energy (WTE) facilities. In other countries, the predominant disposal option for wood, sometimes including CCA-treated wood, is combustion for the production of energy. This paper presents an estimate of the quantity of CCA-treated wood entering the disposal stream in the US, as well as an examination of the trade-offs between landfilling and WTE combustion of CCA-treated wood through a life-cycle assessment and decision support tool (MSW DST). Based upon production statistics, the estimated life span and the phaseout of CCA-treated wood, recent disposal projections estimate the peak US disposal rate to occur in 2008, at 9.7 million m(3). CCA-treated wood, when disposed with construction and demolition (C&D) debris and municipal solid waste (MSW), has been found to increase arsenic and chromium concentrations in leachate. For this reason, and because MSW landfills are lined, MSW landfills have been recommended as a preferred disposal option over unlined C&D debris landfills. Between landfilling and WTE for the same mass of CCA-treated wood, WTE is more expensive (nearly twice the cost), but when operated in accordance with US Environmental Protection Agency (US EPA) regulations, it produces energy and does not emit fossil carbon emissions. If the wood is managed via WTE, less landfill area is required, which could be an influential trade-off in some countries. Although metals are concentrated

Genome-wide association study identified genetic variations and candidate genes for plant architecture component traits in Chinese upland cotton.

Science.gov (United States)

Su, Junji; Li, Libei; Zhang, Chi; Wang, Caixiang; Gu, Lijiao; Wang, Hantao; Wei, Hengling; Liu, Qibao; Huang, Long; Yu, Shuxun

2018-06-01

Thirty significant associations between 22 SNPs and five plant architecture component traits in Chinese upland cotton were identified via GWAS. Four peak SNP loci located on chromosome D03 were simultaneously associated with more plant architecture component traits. A candidate gene, Gh_D03G0922, might be responsible for plant height in upland cotton. A compact plant architecture is increasingly required for mechanized harvesting processes in China. Therefore, cotton plant architecture is an important trait, and its components, such as plant height, fruit branch length and fruit branch angle, affect the suitability of a cultivar for mechanized harvesting. To determine the genetic basis of cotton plant architecture, a genome-wide association study (GWAS) was performed using a panel composed of 355 accessions and 93,250 single nucleotide polymorphisms (SNPs) identified using the specific-locus amplified fragment sequencing method. Thirty significant associations between 22 SNPs and five plant architecture component traits were identified via GWAS. Most importantly, four peak SNP loci located on chromosome D03 were simultaneously associated with more plant architecture component traits, and these SNPs were harbored in one linkage disequilibrium block. Furthermore, 21 candidate genes for plant architecture were predicted in a 0.95-Mb region including the four peak SNPs. One of these genes (Gh_D03G0922) was near the significant SNP D03_31584163 (8.40 kb), and its Arabidopsis homologs contain MADS-box domains that might be involved in plant growth and development. qRT-PCR showed that the expression of Gh_D03G0922 was upregulated in the apical buds and young leaves of the short and compact cotton varieties, and virus-induced gene silencing (VIGS) proved that the silenced plants exhibited increased PH. These results indicate that Gh_D03G0922 is likely the candidate gene for PH in cotton. The genetic variations and candidate genes identified in this study lay a foundation

Microservices as an Evolutionary Architecture of Component-Based Development: A Think-aloud Study

OpenAIRE

Parizi, Reza M.

2018-01-01

Microservices become a fast growing and popular architectural style based on service-oriented development. One of the major advantages using component-based approaches is to support reuse. In this paper, we present a study of microservices and how these systems are related to the traditional abstract models of component-based systems. This research focuses on the core properties of microservices including their scalability, availability and resilience, consistency, coupling and cohesion, and ...

Advancing Coordination Between DRM and CCA in Integrated Flood Risk Management

DEFF Research Database (Denmark)

Flood hazards in coastal regions induce risks toward lives, property, economy and the environment. In need of sustainable and holistic actions to reduce risks, these should include innovative Disaster Risk Management (DRM) and Climate Change Adaptation (CCA) measures. While differing on important...

Chemical yields from low-temperature pyrolysis of CCA-treated wood

Science.gov (United States)

Qirong Fu; Dimitris Argyropolous; Lucian Lucia; David Tilotta; Stan Lebow

2009-01-01

Low-temperature pyrolysis offers a feasible option for wood-waste management and the recovery of a variety of useful chemicals. The effect of chromated copper arsenate (CCA) wood preservative on the yield and composition of various pyrolysis products was investigated in the present research. A novel quantitative 31P nuclear magnetic resonance (...

RETENTION AND PENETRATION OF CCA IN WOOD OF FIRST AND SECOND ROTATION OF Eucalyptus urophylla S.T. Blake

Directory of Open Access Journals (Sweden)

Mara Lúcia Agostini Valle

2013-06-01

Full Text Available http://dx.doi.org/10.5902/198050989292This study aimed to evaluate the retention and penetration of copper chrome arsenate (CCA type C as well as some wood properties of two rotations of two natural hybrid of Eucalyptus urophylla S. T. Blake, aiming their use as treated wood. The study was conducted with material from commercial plantations, with 63 months of age. For the wood characterization, the relationship sapwood-heartwood, the basic density and the size of fibers and vessels were evaluated. For the evaluation of treated wood, the penetration and retention of copper chrome arsenate (CCA type C were determined. Four trees per rotation and genetic material were used, which subsequently were split into three logs, in a total of 12 logs for each treatment. The preservative treatment was performed using the full cell process in autoclave using CCA solution with 2% concentration of active ingredients. The treatment process used was effective under the conditions required by the NBR 9480, with retention values ​​higher than the minimum required by the standard, which is 6.5 kg/m3 of CCA per treated wood, and in addition, provided deep penetration and regular condom in sapwood of all timber treated. There are no restrictions on the use of wood from the first and second rotation for preservative treatment, based on the properties evaluated. There was no correlation between the type C CCA retention and wood properties evaluated.

A 10 Gb/s passive-components-based WDM-TDM reconfigurable optical access network architecture

NARCIS (Netherlands)

Tran, N.C.; Jung, H.D.; Okonkwo, C.M.; Tangdiongga, E.; Koonen, A.M.J.

2011-01-01

We propose a cost-effective, reconfigurable optical access network by employing passive components in the remote node and dual conventional optical transceivers in ONUs. The architecture is demonstrated with bidirectional transmission at 10 Gb/s.

Leaching of chromated copper arsenate (CCA)-treated wood in a simulated monofill and its potential impacts to landfill leachate

Energy Technology Data Exchange (ETDEWEB)

Jambeck, Jenna R. [Department of Environmental Engineering Sciences, University of Florida, Gainesville, FL 32611-6450 (United States); Townsend, Timothy [Department of Environmental Engineering Sciences, University of Florida, Gainesville, FL 32611-6450 (United States)]. E-mail: ttown@ufl.edu; Solo-Gabriele, Helena [Department of Civil, Architectural, and Environmental Engineering, University of Miami, Coral Gables, FL 33146-0630 (United States)

2006-07-31

The proper end-of-life management of chromated copper arsenate (CCA)-treated wood, which contains arsenic, copper, and chromium, is a concern to the solid waste management community. Landfills are often the final repository of this waste stream, and the impacts of CCA preservative metals on leachate quality are not well understood. Monofills are a type of landfill designed and operated to dispose a single waste type, such as ash, tires, mining waste, or wood. The feasibility of managing CCA-treated wood in monofills was examined using a simulated landfill (a leaching lysimeter) that contained a mix of new and weathered CCA-treated wood. The liquid to solid ratio (LS) reached in the experiment was 0.63:1. Arsenic, chromium, and copper leached from the lysimeter at average concentrations of 42 mg/L for arsenic, 9.4 mg/L for chromium, and 2.4 mg/L for copper. Complementary batch leaching studies using deionized water were performed on similar CCA-treated wood samples at LS of 5:1 and 10:1. When results from the lysimeter were compared to the batch test results, copper and chromium leachability appeared to be reduced in the lysimeter disposal environment. Of the three metals, arsenic leached to the greatest extent and was found to have the best correlation between the batch and the lysimeter experiments.

W342F Mutation in CCaMK Enhances Its Affinity to Calmodulin But Compromises Its Role in Supporting Root Nodule Symbiosis in Medicago truncatula

Directory of Open Access Journals (Sweden)

Edgard Jauregui

2017-11-01

Full Text Available The calcium/calmodulin-dependent protein kinase (CCaMK is regulated by free Ca2+ and Ca2+-loaded calmodulin. This dual binding is believed to be involved in its regulation and associated physiological functions, although direct experimental evidence for this is lacking. Here we document that site-directed mutations in the calmodulin-binding domain of CCaMK alters its binding capacity to calmodulin, providing an effective approach to study how calmodulin regulates CCaMK in terms of kinase activity and regulation of rhizobial symbiosis in Medicago truncatula. We observed that mutating the tryptophan at position 342 to phenylalanine (W342F markedly increased the calmodulin-binding capability of the mutant. The mutant CCaMK underwent autophosphorylation and catalyzed substrate phosphorylation in the absence of calcium and calmodulin. When the mutant W342F was expressed in ccamk-1 roots, the transgenic roots exhibited an altered nodulation phenotype. These results indicate that altering the calmodulin-binding domain of CCaMK could generate a constitutively activated kinase with a negative role in the physiological function of CCaMK.

A General Construction of IND-CCA2 Secure Public Key Encryption

DEFF Research Database (Denmark)

Kiltz, Eike; Malone-Lee, John

2003-01-01

We propose a general construction for public key encryption schemes that are IND-CCA2 secure in the random oracle model. We show that the scheme proposed in [1, 2] fits our general framework and moreover that our method of analysis leads to a more efficient security reduction....

Parallel, Multigrid Finite Element Simulator for Fractured/Faulted and Other Complex Reservoirs based on Common Component Architecture (CCA)

Energy Technology Data Exchange (ETDEWEB)

Milind Deo; Chung-Kan Huang; Huabing Wang

2008-08-31

Black-oil, compositional and thermal simulators have been developed to address different physical processes in reservoir simulation. A number of different types of discretization methods have also been proposed to address issues related to representing the complex reservoir geometry. These methods are more significant for fractured reservoirs where the geometry can be particularly challenging. In this project, a general modular framework for reservoir simulation was developed, wherein the physical models were efficiently decoupled from the discretization methods. This made it possible to couple any discretization method with different physical models. Oil characterization methods are becoming increasingly sophisticated, and it is possible to construct geologically constrained models of faulted/fractured reservoirs. Discrete Fracture Network (DFN) simulation provides the option of performing multiphase calculations on spatially explicit, geologically feasible fracture sets. Multiphase DFN simulations of and sensitivity studies on a wide variety of fracture networks created using fracture creation/simulation programs was undertaken in the first part of this project. This involved creating interfaces to seamlessly convert the fracture characterization information into simulator input, grid the complex geometry, perform the simulations, and analyze and visualize results. Benchmarking and comparison with conventional simulators was also a component of this work. After demonstration of the fact that multiphase simulations can be carried out on complex fracture networks, quantitative effects of the heterogeneity of fracture properties were evaluated. Reservoirs are populated with fractures of several different scales and properties. A multiscale fracture modeling study was undertaken and the effects of heterogeneity and storage on water displacement dynamics in fractured basements were investigated. In gravity-dominated systems, more oil could be recovered at a given pore

Workflow-enabled distributed component-based information architecture for digital medical imaging enterprises.

Science.gov (United States)

Wong, Stephen T C; Tjandra, Donny; Wang, Huili; Shen, Weimin

2003-09-01

Few information systems today offer a flexible means to define and manage the automated part of radiology processes, which provide clinical imaging services for the entire healthcare organization. Even fewer of them provide a coherent architecture that can easily cope with heterogeneity and inevitable local adaptation of applications and can integrate clinical and administrative information to aid better clinical, operational, and business decisions. We describe an innovative enterprise architecture of image information management systems to fill the needs. Such a system is based on the interplay of production workflow management, distributed object computing, Java and Web techniques, and in-depth domain knowledge in radiology operations. Our design adapts the approach of "4+1" architectural view. In this new architecture, PACS and RIS become one while the user interaction can be automated by customized workflow process. Clinical service applications are implemented as active components. They can be reasonably substituted by applications of local adaptations and can be multiplied for fault tolerance and load balancing. Furthermore, the workflow-enabled digital radiology system would provide powerful query and statistical functions for managing resources and improving productivity. This paper will potentially lead to a new direction of image information management. We illustrate the innovative design with examples taken from an implemented system.

An Efficient Connected Component Labeling Architecture for Embedded Systems

Directory of Open Access Journals (Sweden)

Fanny Spagnolo

2018-03-01

Full Text Available Connected component analysis is one of the most fundamental steps used in several image processing systems. This technique allows for distinguishing and detecting different objects in images by assigning a unique label to all pixels that refer to the same object. Most of the previous published algorithms have been designed for implementation by software. However, due to the large number of memory accesses and compare, lookup, and control operations when executed on a general-purpose processor, they do not satisfy the speed performance required by the next generation high performance computer vision systems. In this paper, we present the design of a new Connected Component Labeling hardware architecture suitable for high performance heterogeneous image processing of embedded designs. When implemented on a Zynq All Programmable-System on Chip (AP-SOC 7045 chip, the proposed design allows a throughput rate higher of 220 Mpixels/s to be reached using less than 18,000 LUTs and 5000 FFs, dissipating about 620 μJ.

Effect of moisture content on strength of CCA-treated lumber

Science.gov (United States)

Jerrold E. Winandy

1995-01-01

Recent studies on the effects of chromated copper arsenate (CCA) treatment on lumber design properties have primarily evaluated the effects of such treatment at or near 12% moisture content and at failure times of 1 to 10 min. The influence of various moisture contents and faster loading rates is unknown. This report discusses the influence of moisture content and its...

Arsenic levels in wipe samples collected from play structures constructed with CCA-treated wood: Impact on exposure estimates

Energy Technology Data Exchange (ETDEWEB)

Barraj, Leila M. [Chemical Regulation and Food Safety, Exponent, Inc., Suite 1100, 1150 Connecticut Ave., NW, Washington, DC 20036 (United States)], E-mail: lbarraj@exponent.com; Scrafford, Carolyn G. [Chemical Regulation and Food Safety, Exponent, Inc., Suite 1100, 1150 Connecticut Ave., NW, Washington, DC 20036 (United States); Eaton, W. Cary [RTI International, 3040 Cornwallis Road, Research Triangle Park, NC 27709 (United States); Rogers, Robert E.; Jeng, Chwen-Jyh [Toxcon Health Sciences Research Centre Inc., 9607 - 41 Avenue, Edmonton, Alberta, T6E 5X7 (Canada)

2009-04-01

Lumber treated with chromated copper arsenate (CCA) has been used in residential outdoor wood structures and playgrounds. The U.S. EPA has conducted a probabilistic assessment of children's exposure to arsenic from CCA-treated structures using the Stochastic Human Exposure and Dose Simulation model for the wood preservative scenario (SHEDS-Wood). The EPA assessment relied on data from an experimental study using adult volunteers and designed to measure arsenic in maximum hand and wipe loadings. Analyses using arsenic handloading data from a study of children playing on CCA-treated play structures in Edmonton, Canada, indicate that the maximum handloading values significantly overestimate the exposure that occurs during actual play. The objective of our paper is to assess whether the dislodgeable arsenic residues from structures in the Edmonton study are comparable to those observed in other studies and whether they support the conclusion that the values derived by EPA using modeled maximum loading values overestimate hand exposures. We compared dislodgeable arsenic residue data from structures in the playgrounds in the Edmonton study to levels observed in studies used in EPA's assessment. Our analysis showed that the dislodgeable arsenic levels in the Edmonton playground structures are similar to those in the studies used by EPA. Hence, the exposure estimates derived using the handloading data from children playing on CCA-treated structures are more representative of children's actual exposures than the overestimates derived by EPA using modeled maximum values. Handloading data from children playing on CCA-treated structures should be used to reduce the uncertainty of modeled estimates derived using the SHEDS-Wood model.

Architectural freedom and industrialized architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

to explain that architecture can be thought as a complex and diverse design through customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performing expression in direct relation to the given context. Through the last couple of years we have...... proportions, to organize the process on site choosing either one room wall components or several rooms wall components – either horizontally or vertically. Combined with the seamless joint the playing with these possibilities the new industrialized architecture can deliver variations in choice of solutions...... for retrofit design. If we add the question of the installations e.g. ventilation to this systematic thinking of building technique we get a diverse and functional architecture, thereby creating a new and clearer story telling about new and smart system based thinking behind architectural expression....

Managing Scientific Software Complexity with Bocca and CCA

Directory of Open Access Journals (Sweden)

Benjamin A. Allan

2008-01-01

Full Text Available In high-performance scientific software development, the emphasis is often on short time to first solution. Even when the development of new components mostly reuses existing components or libraries and only small amounts of new code must be created, dealing with the component glue code and software build processes to obtain complete applications is still tedious and error-prone. Component-based software meant to reduce complexity at the application level increases complexity to the extent that the user must learn and remember the interfaces and conventions of the component model itself. To address these needs, we introduce Bocca, the first tool to enable application developers to perform rapid component prototyping while maintaining robust software-engineering practices suitable to HPC environments. Bocca provides project management and a comprehensive build environment for creating and managing applications composed of Common Component Architecture components. Of critical importance for high-performance computing (HPC applications, Bocca is designed to operate in a language-agnostic way, simultaneously handling components written in any of the languages commonly used in scientific applications: C, C++, Fortran, Python and Java. Bocca automates the tasks related to the component glue code, freeing the user to focus on the scientific aspects of the application. Bocca embraces the philosophy pioneered by Ruby on Rails for web applications: start with something that works, and evolve it to the user's purpose.

Evaluation of circulating cathodic antigen (CCA) strip for diagnosis of urinary schistosomiasis in Hassoba school children, Afar, Ethiopia

OpenAIRE

Ayele B.; Erko B.; Legesse M.; Hailu A.; Medhin G.

2008-01-01

A total of 206 urine samples collected from Hassoba Elementary schoolchildren, Afar, Ethiopia, a low Schistosoma haematobium endemic setting, was diagnosed to evaluate the performance of CCA strip using double references, urine filtration technique and urinalysis dipstick (Combur 10 Test®) that detect schistosome eggs and blood in urine, respectively. The former was used as a gold standard reference method. Sensitivity, specificity, positive and negative predictive values for the CCA were 52%...

Integrating deep and shallow natural language processing components : representations and hybrid architectures

OpenAIRE

Schäfer, Ulrich

2006-01-01

We describe basic concepts and software architectures for the integration of shallow and deep (linguistics-based, semantics-oriented) natural language processing (NLP) components. The main goal of this novel, hybrid integration paradigm is improving robustness of deep processing. After an introduction to constraint-based natural language parsing, we give an overview of typical shallow processing tasks. We introduce XML standoff markup as an additional abstraction layer that eases integration ...

Sumoylation of the Plant Clock Transcription Factor CCA1 Suppresses DNA Binding

NARCIS (Netherlands)

Hansen, L.L.; Imrie, L.; Le Bihan, T.; van den Burg, H.A.; van Ooijen, G.

2017-01-01

In plants, the circadian clock regulates the expression of one-third of all transcripts and is crucial to virtually every aspect of metabolism and growth. We now establish sumoylation, a posttranslational protein modification, as a novel regulator of the key clock protein CCA1 in the model plant

HiMoP: A three-component architecture to create more human-acceptable social-assistive robots : Motivational architecture for assistive robots.

Science.gov (United States)

Rodríguez-Lera, Francisco J; Matellán-Olivera, Vicente; Conde-González, Miguel Á; Martín-Rico, Francisco

2018-05-01

Generation of autonomous behavior for robots is a general unsolved problem. Users perceive robots as repetitive tools that do not respond to dynamic situations. This research deals with the generation of natural behaviors in assistive service robots for dynamic domestic environments, particularly, a motivational-oriented cognitive architecture to generate more natural behaviors in autonomous robots. The proposed architecture, called HiMoP, is based on three elements: a Hierarchy of needs to define robot drives; a set of Motivational variables connected to robot needs; and a Pool of finite-state machines to run robot behaviors. The first element is inspired in Alderfer's hierarchy of needs, which specifies the variables defined in the motivational component. The pool of finite-state machine implements the available robot actions, and those actions are dynamically selected taking into account the motivational variables and the external stimuli. Thus, the robot is able to exhibit different behaviors even under similar conditions. A customized version of the "Speech Recognition and Audio Detection Test," proposed by the RoboCup Federation, has been used to illustrate how the architecture works and how it dynamically adapts and activates robots behaviors taking into account internal variables and external stimuli.

Evaluation of the wood CCA preservative treatment process of Eucalyptus (Eucaliptus ssp) by X-ray fluorescence technique

International Nuclear Information System (INIS)

Pereira Junior, Sergio Matias; Salvador, Vera Lucia Ribeiro; Sato, Ivone Mulako

2013-01-01

Brazil produces around 1,2 mi m 3 of treated wood to meet the annual demand of railway, electric, rural and construction sectors. The treated woods used for poles, sleepers, fence posts and plywoods should be according to Brazilian norms requirements. The most used wood species are eucalyptus (Eucaliptus ssp)and pine (Pinus ssp). The most wood preservative products used in Brazil are CCA (Chromated Copper Arsenate) and CCB (Copper Chromium and Boron Salt). The analytical methods, such as Flame Atomic Absorption Spectrometry (FAAS) and Plasma Inductively Coupled Optical Emission Spectrometry (ICPOES) have been used for the evaluation of those treatment processes. In this work, the sapwood sample was obtained from eucalyptus trees (Eucaliptus ssp) obtained from Minas Gerais State, Brazil, cut plantation areas. Sawdust sapwood sample was grounded and submitted to different additions of CCA solutions (0.2, 0.7, 1.3, 2.3, 3.6, 6.3, 11.7and17.9 kg m -3 ). Power and pressed pellets sapwood samples, analyzed by EDXRFS, showed a good linear relation (r 2 >0.99) between the characteristic intensity fluorescent lines (CuΚα, CrΚαand AsΚΒ) and their concentration, also, showed adequate sensitivity (LQ -1 ) for Cu, Cr and As determination in treated woods. Cu, Cr and As were determined in powdered sawdust samples by FAA spectrometry, using the AWPA A11-93 standard method; the relation between the CCA retention and their concentration showed a lower linear relation than EDXRFS; the FAAS spreading result could be attributed to laboratorial CCA addition process. (author)

New Approach to Remove Metals from Chromated Copper Arsenate (CCA)-Treated Wood

Science.gov (United States)

Todd F. Shupe; Chung Y. Hse; Hui Pan

2012-01-01

Recovery of metals from chromated copper arsenate (CCA)-treated southern pine wood particles was investigated using binary acid solutions consisting of acetic, oxalic, and phosphoric acids in a microwave reactor. Formation of an insoluble copper oxalate complex in the binary solution containing oxalic acid was the major factor for low copper removal. Furthermore, the...

Proceedings International Workshop on Formal Engineering approaches to Software Components and Architectures

OpenAIRE

Kofroň, Jan; Tumova, Jana

2017-01-01

These are the proceedings of the 14th International Workshop on Formal Engineering approaches to Software Components and Architectures (FESCA). The workshop was held on April 22, 2017 in Uppsala (Sweden) as a satellite event to the European Joint Conference on Theory and Practice of Software (ETAPS'17). The aim of the FESCA workshop is to bring together junior researchers from formal methods, software engineering, and industry interested in the development and application of formal modelling ...

Rainfall prediction of Cimanuk watershed regions with canonical correlation analysis (CCA)

Science.gov (United States)

Rustiana, Shailla; Nurani Ruchjana, Budi; Setiawan Abdullah, Atje; Hermawan, Eddy; Berliana Sipayung, Sinta; Gede Nyoman Mindra Jaya, I.; Krismianto

2017-10-01

Rainfall prediction in Indonesia is very influential on various development sectors, such as agriculture, fisheries, water resources, industry, and other sectors. The inaccurate predictions can lead to negative effects. Cimanuk watershed is one of the main pillar of water resources in West Java. This watersheds divided into three parts, which is a headwater of Cimanuk sub-watershed, Middle of Cimanuk sub-watershed and downstream of Cimanuk sub- watershed. The flow of this watershed will flow through the Jatigede reservoir and will supply water to the north-coast area in the next few years. So, the reliable model of rainfall prediction is very needed in this watershed. Rainfall prediction conducted with Canonical Correlation Analysis (CCA) method using Climate Predictability Tool (CPT) software. The prediction is every 3months on 2016 (after January) based on Climate Hazards group Infrared Precipitation with Stations (CHIRPS) data over West Java. Predictors used in CPT were the monthly data index of Nino3.4, Dipole Mode (DMI), and Monsoon Index (AUSMI-ISMI-WNPMI-WYMI) with initial condition January. The initial condition is chosen by the last data update. While, the predictant were monthly rainfall data CHIRPS region of West Java. The results of prediction rainfall showed by skill map from Pearson Correlation. High correlation of skill map are on MAM (Mar-Apr-May), AMJ (Apr-May-Jun), and JJA (Jun-Jul-Aug) which means the model is reliable to forecast rainfall distribution over Cimanuk watersheds region (over West Java) on those seasons. CCA score over those season prediction mostly over 0.7. The accuracy of the model CPT also indicated by the Relative Operating Characteristic (ROC) curve of the results of Pearson correlation 3 representative point of sub-watershed (Sumedang, Majalengka, and Cirebon), were mostly located in the top line of non-skill, and evidenced by the same of rainfall patterns between observation and forecast. So, the model of CPT with CCA method

Application of a CCA-treated wood waste decontamination process to other copper-based preservative-treated wood after disposal

Energy Technology Data Exchange (ETDEWEB)

Janin, Amelie, E-mail: amelie.janin@ete.inrs.ca [University of Toronto, Faculty of Forestry, 33, Willcocks St., Toronto, ON, M5S 3B3 (Canada); Coudert, Lucie, E-mail: lucie.coudert@ete.inrs.ca [Institut national de la recherche scientifique (Centre Eau, Terre et Environnement), Universite du Quebec, 490 rue de la Couronne, Quebec, QC, G1K 9A9 (Canada); Riche, Pauline, E-mail: pauline.riche@ete.inrs.ca [Institut national de la recherche scientifique (Centre Eau, Terre et Environnement), Universite du Quebec, 490 rue de la Couronne, Quebec, QC, G1K 9A9 (Canada); Mercier, Guy, E-mail: guy_mercier@ete.inrs.ca [Institut national de la recherche scientifique (Centre Eau, Terre et Environnement), Universite du Quebec, 490 rue de la Couronne, Quebec, QC, G1K 9A9 (Canada); Cooper, Paul, E-mail: p.cooper@utoronto.ca [University of Toronto, Faculty of Forestry, 33, Willcocks St., Toronto, ON, M5S 3B3 (Canada); Blais, Jean-Francois, E-mail: blaisjf@ete.inrs.ca [Institut national de la recherche scientifique (Centre Eau, Terre et Environnement), Universite du Quebec, 490 rue de la Couronne, Quebec, QC, G1K 9A9 (Canada)

2011-02-28

Research highlights: {yields} This paper describes a process for the metal removal from treated (CA-, ACQ- or MCQ-) wood wastes. {yields} This sulfuric acid leaching process is simple and economic. {yields} The remediated wood could be recycled in the industry. - Abstract: Chromated copper arsenate (CCA)-treated wood was widely used until 2004 for residential and industrial applications. Since 2004, CCA was replaced by alternative copper preservatives such as alkaline copper quaternary (ACQ), copper azole (CA) and micronized copper quaternary (MCQ), for residential applications due to health concerns. Treated wood waste disposal is becoming an issue. Previous studies identified a chemical process for decontaminating CCA-treated wood waste based on sulfuric acid leaching. The potential application of this process to wood treated with the copper-based preservatives (alkaline copper quaternary (ACQ), copper azole (CA) and micronized copper quaternary (MCQ)) is investigated here. Three consecutive leaching steps with 0.1 M sulfuric acid at 75 deg, C for 2 h were successful for all the types of treated wood and achieved more than 98% copper solubilisation. The different acidic leachates produced were successively treated by coagulation using ferric chloride and precipitation (pH = 7) using sodium hydroxide. Between 94 and 99% of copper in leachates could be recovered by electrodeposition after 90 min using 2 A electrical current. Thus, the process previously developed for CCA-treated wood waste decontamination could be efficiently applied for CA-, ACQ- or MCQ-treated wood.

Demonstration of the efficiency and robustness of an acid leaching process to remove metals from various CCA-treated wood samples.

Science.gov (United States)

Coudert, Lucie; Blais, Jean-François; Mercier, Guy; Cooper, Paul; Janin, Amélie; Gastonguay, Louis

2014-01-01

In recent years, an efficient and economically attractive leaching process has been developed to remove metals from copper-based treated wood wastes. This study explored the applicability of this leaching process using chromated copper arsenate (CCA) treated wood samples with different initial metal loading and elapsed time between wood preservation treatment and remediation. The sulfuric acid leaching process resulted in the solubilization of more than 87% of the As, 70% of the Cr, and 76% of the Cu from CCA-chips and in the solubilization of more than 96% of the As, 78% of the Cr and 91% of the Cu from CCA-sawdust. The results showed that the performance of this leaching process might be influenced by the initial metal loading of the treated wood wastes and the elapsed time between preservation treatment and remediation. The effluents generated during the leaching steps were treated by precipitation-coagulation to satisfy the regulations for effluent discharge in municipal sewers. Precipitation using ferric chloride and sodium hydroxide was highly efficient, removing more than 99% of the As, Cr, and Cu. It appears that this leaching process can be successfully applied to remove metals from different CCA-treated wood samples and then from the effluents. Copyright © 2013 Elsevier Ltd. All rights reserved.

Evaluation of the wood CCA preservative treatment process of Eucalyptus (Eucaliptus ssp) by X-ray fluorescence technique

Energy Technology Data Exchange (ETDEWEB)

Pereira Junior, Sergio Matias, E-mail: matias@ipt.br [Instituto de Pesquisas Tecnologicas (IPT), Sao Paulo, SP (Brazil); Salvador, Vera Lucia Ribeiro; Sato, Ivone Mulako, E-mail: imsato@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2013-07-01

Brazil produces around 1,2 mi m{sup 3} of treated wood to meet the annual demand of railway, electric, rural and construction sectors. The treated woods used for poles, sleepers, fence posts and plywoods should be according to Brazilian norms requirements. The most used wood species are eucalyptus (Eucaliptus ssp)and pine (Pinus ssp). The most wood preservative products used in Brazil are CCA (Chromated Copper Arsenate) and CCB (Copper Chromium and Boron Salt). The analytical methods, such as Flame Atomic Absorption Spectrometry (FAAS) and Plasma Inductively Coupled Optical Emission Spectrometry (ICPOES) have been used for the evaluation of those treatment processes. In this work, the sapwood sample was obtained from eucalyptus trees (Eucaliptus ssp) obtained from Minas Gerais State, Brazil, cut plantation areas. Sawdust sapwood sample was grounded and submitted to different additions of CCA solutions (0.2, 0.7, 1.3, 2.3, 3.6, 6.3, 11.7and17.9 kg m{sup -3}). Power and pressed pellets sapwood samples, analyzed by EDXRFS, showed a good linear relation (r{sup 2}>0.99) between the characteristic intensity fluorescent lines (CuΚα, CrΚαand AsΚΒ) and their concentration, also, showed adequate sensitivity (LQ < 5mgkg{sup -1}) for Cu, Cr and As determination in treated woods. Cu, Cr and As were determined in powdered sawdust samples by FAA spectrometry, using the AWPA A11-93 standard method; the relation between the CCA retention and their concentration showed a lower linear relation than EDXRFS; the FAAS spreading result could be attributed to laboratorial CCA addition process. (author)

Carotid stenosis measurement on colour Doppler ultrasound: Agreement of ECST, NASCET and CCA methods applied to ultrasound with intra-arterial angiographic stenosis measurement

International Nuclear Information System (INIS)

Wardlaw, Joanna M.; Lewis, Steff

2005-01-01

Purpose: Carotid stenosis is usually determined on Doppler ultrasound from velocity readings. We wondered if angiography-style stenosis measurements applied to ultrasound images improved accuracy over velocity readings alone, and if so, which measure correlated best with angiography. Materials and methods: We studied prospectively patients undergoing colour Doppler ultrasound (CDU) for TIA or minor stroke. Those with 50%+ symptomatic internal carotid artery (ICA) stenosis had intra-arterial angiography (IAA). We measured peak systolic ICA velocity, and from the ultrasound image, the minimal residual lumen, the original lumen (ECST), ICA diameter distal (NASCET) and CCA diameter proximal (CCA method) to the stenosis. The IAAs were measured by ECST, NASCET and CCA methods also, blind to CDU. Results: Amongst 164 patients (328 arteries), on CDU the ECST, NASCET and CCA stenosis measures were similarly related to each other (ECST = 0.54 NASCET + 46) as on IAA (ECST = 0.6 NASCET + 40). Agreement between CDU- and IAA-measured stenosis was similar for ECST (r = 0.51), and CCA (r = 0.48) methods, and slightly worse for NASCET (r = 0.41). Adding IAA-style stenosis to the peak systolic ICA velocity did not improve agreement with IAA over peak systolic velocity alone. Conclusion: Angiography-style stenosis measures have similar inter-relationships when applied to CDU, but do not improve accuracy of ultrasound over peak systolic ICA velocity alone

Software architecture 2

CERN Document Server

Oussalah, Mourad Chabanne

2014-01-01

Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural templa

Software architecture 1

CERN Document Server

Oussalah , Mourad Chabane

2014-01-01

Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural template

Removal of muscle artifact from EEG data: comparison between stochastic (ICA and CCA) and deterministic (EMD and wavelet-based) approaches

Science.gov (United States)

Safieddine, Doha; Kachenoura, Amar; Albera, Laurent; Birot, Gwénaël; Karfoul, Ahmad; Pasnicu, Anca; Biraben, Arnaud; Wendling, Fabrice; Senhadji, Lotfi; Merlet, Isabelle

2012-12-01

Electroencephalographic (EEG) recordings are often contaminated with muscle artifacts. This disturbing myogenic activity not only strongly affects the visual analysis of EEG, but also most surely impairs the results of EEG signal processing tools such as source localization. This article focuses on the particular context of the contamination epileptic signals (interictal spikes) by muscle artifact, as EEG is a key diagnosis tool for this pathology. In this context, our aim was to compare the ability of two stochastic approaches of blind source separation, namely independent component analysis (ICA) and canonical correlation analysis (CCA), and of two deterministic approaches namely empirical mode decomposition (EMD) and wavelet transform (WT) to remove muscle artifacts from EEG signals. To quantitatively compare the performance of these four algorithms, epileptic spike-like EEG signals were simulated from two different source configurations and artificially contaminated with different levels of real EEG-recorded myogenic activity. The efficiency of CCA, ICA, EMD, and WT to correct the muscular artifact was evaluated both by calculating the normalized mean-squared error between denoised and original signals and by comparing the results of source localization obtained from artifact-free as well as noisy signals, before and after artifact correction. Tests on real data recorded in an epileptic patient are also presented. The results obtained in the context of simulations and real data show that EMD outperformed the three other algorithms for the denoising of data highly contaminated by muscular activity. For less noisy data, and when spikes arose from a single cortical source, the myogenic artifact was best corrected with CCA and ICA. Otherwise when spikes originated from two distinct sources, either EMD or ICA offered the most reliable denoising result for highly noisy data, while WT offered the better denoising result for less noisy data. These results suggest that

Study of Selected Components of Architectural Environment of Primary Schools - Preferences of Adults and Analysis of the Specialist Literature

Science.gov (United States)

Halarewicz, Aleksandra

2017-10-01

The school is one of the oldest social institutions designed to prepare a young man for an adult life. It performs a teaching and educational function in child’s life. It is a place where, apart from home, the child spends most of the time in a day, therefore it is one of the most important institutions in the life of a young person. The school environment has a direct impact on the student's personality and ambition, and it shapes an attitude of the young person. Therefore, the design process preceding the establishment of school facilities is extremely responsible and should be conducted in a conscious and thoughtful way. This article is a summary and an attempt to synthesize the data obtained from the survey carried out by the author in the context of the design guidelines contained in the specialist literature. The questionnaire survey was designed to make an attempt to determine adult’s preferences, opinions and perceptions about selected components of the primary school environment, including the factors which determine the choice of school for children, the priorities of architecture components made for early childhood use, also to specify the type and the scale of existing drawbacks and problems in the school construction industry, as well as expectations about the contemporary architecture of primary schools and its future changes. Moreover, in the article, based on the analysis of the available specialist’s literature, the following are broadly discussed: the general division and characterization of school spaces, issues related to the influence of selected components of the architectural environment on the physical, mental and psychological safety of children. Furthermore, the author raises the subject of the influence of the architectural interiors and furniture on the mood, emotions or comfort of children in the early school age, based on the anthropometric characteristics of children and issues related to the perception of space with an extra

Research initiatives for plug-and-play scientific computing

International Nuclear Information System (INIS)

McInnes, Lois Curfman; Dahlgren, Tamara; Nieplocha, Jarek; Bernholdt, David; Allan, Ben; Armstrong, Rob; Chavarria, Daniel; Elwasif, Wael; Gorton, Ian; Kenny, Joe; Krishan, Manoj; Malony, Allen; Norris, Boyana; Ray, Jaideep; Shende, Sameer

2007-01-01

This paper introduces three component technology initiatives within the SciDAC Center for Technology for Advanced Scientific Component Software (TASCS) that address ever-increasing productivity challenges in creating, managing, and applying simulation software to scientific discovery. By leveraging the Common Component Architecture (CCA), a new component standard for high-performance scientific computing, these initiatives tackle difficulties at different but related levels in the development of component-based scientific software: (1) deploying applications on massively parallel and heterogeneous architectures, (2) investigating new approaches to the runtime enforcement of behavioral semantics, and (3) developing tools to facilitate dynamic composition, substitution, and reconfiguration of component implementations and parameters, so that application scientists can explore tradeoffs among factors such as accuracy, reliability, and performance

Estudio psicométrico del Cuestionario de Conducta Antisocial (CC-A en adolescentes tempranos de Tucumán, Argentina

Directory of Open Access Journals (Sweden)

Ana Betina Lacunza

2016-01-01

Full Text Available El comportamiento antisocial se refiere a una diversidad de actos que infringen las normas sociales y de convivencia. Su delimitación está dada tanto por la valoración social de la gravedad de los comportamientos como por su alejamiento a las pautas normativas de una sociedad. El objetivo de este trabajo fue analizar las propiedades psicométricas del cuestionario de Conducta Antisocial (CC-A en adolescentes de Tucumán, Argentina. Se aplicó el CC-A y la Batería de Socialización BAS-3 a quinientos once adolescentes escolarizados de once y doce años. Se encontró una solución de tres factores que explicaban el 35 % de la varianza, congruente con la propuesta original. Los coeficientes Alpha de Cronbach fueron adecuados en Agresividad (.735, Aislamiento (.769 y Ansiedad/Retraimiento (.681, y se establecieron relaciones entre CC-A y BAS-3. Así mismo, se observaron correlaciones negativas entre Agresividad, Consideración con los demás y Autocontrol mientras que fueron positivas entre Aislamiento y Retraimiento. Posteriormente, se determinaron las categorías percentilares de esta versión (CC-A de ventiocho ítems; 18% de los adolescentes presentaban percentiles de riesgo en Agresividad mientras que un 20.9% lo hacía en Aislamiento. El estudio aporta datos con respecto a las propiedades psicométricas del instrumento en población local, indicando su sensibilidad para la evaluación del comportamiento antisocial.

Evaluation and optimization of the Circulating Cathodic Antigen (POC-CCA) cassette test for detecting Schistosoma mansoni infection by using image analysis in school children in Mwanza Region, Tanzania

DEFF Research Database (Denmark)

Partal, Miriam Casacuberta; Kinunghi, Safari; Vennervald, Birgitte J

2016-01-01

of Lake Victoria in Mwanza Region, Tanzania, and to optimize the reading of the POC-CCA test lines by using a computer software image analysis. Initially, a pilot study in 106 school children indicated that time of urine collection did not have an impact on CCA results as 84.9% (90) had identical scores...... POC-CCAs were compared to six Kato-Katz smears (75.0% vs. 42.6%; p reading of the POC-CCA, a Software...... tool (Image Studio Lite®) was used to read and quantify the colour (expressed as pixels) of the test line on all positive tests, showing a positive correlation between number of pixels and the visually scored intensities and between number of pixels and egg counts. In conclusion, the POC-CCA assay...

Electrodialytic remediation of CCA-treated waste wood in a 2 m3 pilot plant

DEFF Research Database (Denmark)

Christensen, Iben Vernegren; Pedersen, Anne Juul; Ottosen, Lisbeth M.

2006-01-01

Waste wood that has been treated with chromated-copper-arsenate (CCA) poses a potential environmental problem due to the content of copper, chromium and arsenic. A pilot plant for electrodialytic remediation of up to 2 m3 wood has been designed and tested and the results are presented here. Sever...

Crystal structures of CCa2CuO5 and CSr1.9Ca1.1Cu2O7 refined from single crystal data

International Nuclear Information System (INIS)

Kopnin, E.M.; Matveev, A.T.; Salamakha, P.S.; Sato, A.; Takayama-Muromachi, E.

2003-01-01

Single crystals were grown for new layered oxycarbonates CCa 2 CuO 5 and CSr 1.9 Ca 1.1 Cu 2 O 7 at 6 GPa using a belt-type apparatus. Their crystal structures were determined using single crystal X-ray diffraction data with R1(wR2)=0.0294(0.0659) and 0.0199(0.0457) for CCa 2 CuO 5 and CSr 1.9 Ca 1.1 Cu 2 O 7 , respectively. These phases crystallize in the space group P4/mmm (No. 123), Z=1 with a=3.8157(1) Angst, c=7.1426(3) Angst for CCa 2 CuO 5 and a=3.8753(1) Angst, c=10.6765(5) Angst for CSr 1.9 Ca 1.1 Cu 2 O 7 . In contrast to CSr 2 CuO 5 , no ordering in the orientation of the triangular CO 3 groups was revealed in CCa 2 CuO 5 and CSr 1.9 Ca 1.1 Cu 2 O 7

Hilar cholangiocarcinoma is pathologically similar to pancreatic duct adenocarcinoma: suggestions of similar background and development.

Science.gov (United States)

Nakanuma, Yasuni; Sato, Yasunori

2014-07-01

Routine experiences suggest that cholangiocarcinomas (CCAs) show different clinicopathological behaviors along the biliary tree, and hilar CCA apparently resembles pancreatic duct adenocarcinoma (PDAC). Herein, the backgrounds for these similarities were reviewed. While all cases of PDAC, hilar CCA, intrahepatic CCA (ICCA) and CCA components of combined hepatocellular-cholangiocarcinoma (cHC-CCA) were adenocarcinomas, micropapillary patterns and columnar carcinoma cells were common in PDAC and hilar CCA, and trabecular components and cuboidal carcinoma cells were common in ICCA and CCA components of cHC-CCA. Anterior gradient protein-2 and S100P were frequently expressed in perihilar CCA and PDAC, while neural cell adhesion molecule and luminal epithelial membrane antigen were common in CCA components of c-HC-CCA. Pdx1 and Hes1 were frequently and markedly expressed aberrantly in PDAC and perihilar CCA, although their expression was rare and mild in CCA components in cHC-CCA and ICCA. Hilar CCA showed a similar postoperative prognosis to PDAC but differed from ICCA and cHC-CCA. Taken together, hilar CCA may differ from ICCA and CCA components of cHC-CCA but have a similar development to PDAC. These similarities may be explained by the unique anatomical, embryological and reactive nature of the pancreatobiliary tract. Further studies of these intractable malignancies are warranted. © 2014 Japanese Society of Hepato-Biliary-Pancreatic Surgery.

[Influence of elevated homocystein level and selected lipid parameters in kidney transplant patients on the progression of atherosclerotic changes assessed by intima-media thickness index (CCA-IMT)].

Science.gov (United States)

Janda, Katarzyna; Aksamit, Dariusz; Drozdz, Maciej; Krzanowski, Marcin; Ignacak, Ewa; Kowalczyk-Michałek, Martyna; Tabor-Ciepiela, Barbara; Sułowicz, Władysław

2012-01-01

The aim of the study was to evaluate the influence of elevated homocystein (Hcy) level and selected lipid parameters on the progression of atherosclerotic changes in patients after kidney transplantation (KTx). The study included 51 pts (17 F, 34 M) aged 15-62 years (median 38.1) after cadaver KTx. The mean observation period equaled 21.2 months (6-24 months); while total observation period was 90 patients/ years. Hcy levels was measured using HPLC, Lp(a) and Apo-B levels using the nephelometric method and total cholesterol with its' HDL and LDL fractions, triglycerides and creatinine based on the Hitachi 917 analyzer. Patients' blood was drawn before renal transplantation and 3, 6, 9, 12, 15, 18, 21 and 24 months after KTx. Common carotid artery intima media thickness (CCA-IMT) was evaluated by ultrasound on 14 days, 12 and 24 months after KTx. CCA-IMT correlated significantly with Hcy levels after 12 months (R=0.53; p=0.0009) and 24 months (R=0.38; p=0.0356) after KTx. Significant differences were found 12 and 24 months after KTx in CCA-IMT between patients with normal (15 micromol/ l) mean Hcy concentrations: p=0.0035 and p= 0.015, respectively. Analyzing changes in CCA-IMT, significant differences were noted when comparing the CCA-IMT increment after 12 and 24 months post KTx in patients with normal (15 micromol/l) homocystein concentrations: p=0.049 and p=0.0039, respectively. Increment of CCA-IMT 12 months after KTx, significantly correlated with mean total cholesterol level (R=0.35; p=0.0333), whereas 24 months after procedure correlated significantly with 0.0315). Hcy level is an independent risk factor for atherosclerosis development in patients after KTx. Elevated Hcy level as well as increased cholesterol and Lp(a) levels enhance the progression of atherosclerotic changes evaluated by CCA-IMT in KTx patients.

Abstract interfaces for data analysis - component architecture for data analysis tools

International Nuclear Information System (INIS)

Barrand, G.; Binko, P.; Doenszelmann, M.; Pfeiffer, A.; Johnson, A.

2001-01-01

The fast turnover of software technologies, in particular in the domain of interactivity (covering user interface and visualisation), makes it difficult for a small group of people to produce complete and polished software-tools before the underlying technologies make them obsolete. At the HepVis'99 workshop, a working group has been formed to improve the production of software tools for data analysis in HENP. Beside promoting a distributed development organisation, one goal of the group is to systematically design a set of abstract interfaces based on using modern OO analysis and OO design techniques. An initial domain analysis has come up with several categories (components) found in typical data analysis tools: Histograms, Ntuples, Functions, Vectors, Fitter, Plotter, analyzer and Controller. Special emphasis was put on reducing the couplings between the categories to a minimum, thus optimising re-use and maintainability of any component individually. The interfaces have been defined in Java and C++ and implementations exist in the form of libraries and tools using C++ (Anaphe/Lizard, OpenScientist) and Java (Java Analysis Studio). A special implementation aims at accessing the Java libraries (through their Abstract Interfaces) from C++. The authors give an overview of the architecture and design of the various components for data analysis as discussed in AIDA

A new version of code Java for 3D simulation of the CCA model

Science.gov (United States)

Zhang, Kebo; Xiong, Hailing; Li, Chao

2016-07-01

In this paper we present a new version of the program of CCA model. In order to benefit from the advantages involved in the latest technologies, we migrated the running environment from JDK1.6 to JDK1.7. And the old program was optimized into a new framework, so promoted extendibility.

metaCCA: summary statistics-based multivariate meta-analysis of genome-wide association studies using canonical correlation analysis.

Science.gov (United States)

Cichonska, Anna; Rousu, Juho; Marttinen, Pekka; Kangas, Antti J; Soininen, Pasi; Lehtimäki, Terho; Raitakari, Olli T; Järvelin, Marjo-Riitta; Salomaa, Veikko; Ala-Korpela, Mika; Ripatti, Samuli; Pirinen, Matti

2016-07-01

A dominant approach to genetic association studies is to perform univariate tests between genotype-phenotype pairs. However, analyzing related traits together increases statistical power, and certain complex associations become detectable only when several variants are tested jointly. Currently, modest sample sizes of individual cohorts, and restricted availability of individual-level genotype-phenotype data across the cohorts limit conducting multivariate tests. We introduce metaCCA, a computational framework for summary statistics-based analysis of a single or multiple studies that allows multivariate representation of both genotype and phenotype. It extends the statistical technique of canonical correlation analysis to the setting where original individual-level records are not available, and employs a covariance shrinkage algorithm to achieve robustness.Multivariate meta-analysis of two Finnish studies of nuclear magnetic resonance metabolomics by metaCCA, using standard univariate output from the program SNPTEST, shows an excellent agreement with the pooled individual-level analysis of original data. Motivated by strong multivariate signals in the lipid genes tested, we envision that multivariate association testing using metaCCA has a great potential to provide novel insights from already published summary statistics from high-throughput phenotyping technologies. Code is available at https://github.com/aalto-ics-kepaco anna.cichonska@helsinki.fi or matti.pirinen@helsinki.fi Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press.

Landfill disposal of CCA-treated wood with construction and demolition (C&D) debris: arsenic, chromium, and copper concentrations in leachate.

Science.gov (United States)

Jambeck, Jenna R; Townsend, Timothy G; Solo-Gabriele, Helena M

2008-08-01

Although phased out of many residential uses in the United States, the disposal of CCA-treated wood remains a concern because significant quantities have yet to be taken out of service, and it is commonly disposed in landfills. Catastrophic events have also led to the concentrated disposal of CCA-treated wood, often in unlined landfills. The goal of this research was to simulate the complex chemical and biological activity of a construction and demolition (C&D) debris landfill containing a realistic quantity of CCA-treated wood (10% by mass), produce leachate, and then evaluate the arsenic, copper, and chromium concentrations in the leachate as an indication of what may occur in a landfill setting. Copper concentrations were not significantly elevated in the control or experimental simulated landfill setting (alpha = 0.05). However, the concentrations of arsenic and chromium were significantly higher in the experimental simulated landfill leachate compared to the control simulated landfill leachate (alpha = 0.05, p debris can impact leachate quality which, in turn could affect leachate management practices or aquifers below unlined landfills.

Product Architecture Modularity Strategies

DEFF Research Database (Denmark)

Mikkola, Juliana Hsuan

2003-01-01

The focus of this paper is to integrate various perspectives on product architecture modularity into a general framework, and also to propose a way to measure the degree of modularization embedded in product architectures. Various trade-offs between modular and integral product architectures...... and how components and interfaces influence the degree of modularization are considered. In order to gain a better understanding of product architecture modularity as a strategy, a theoretical framework and propositions are drawn from various academic literature sources. Based on the literature review......, the following key elements of product architecture are identified: components (standard and new-to-the-firm), interfaces (standardization and specification), degree of coupling, and substitutability. A mathematical function, termed modularization function, is introduced to measure the degree of modularization...

THE ARCHITECTURE OF MULTI-COMPONENT DISTRIBUTED HYBRID EXPERT TRAINING SYSTEM

Directory of Open Access Journals (Sweden)

Оleh Shevchuk

2016-09-01

Full Text Available The paper reports on the design of a multi-component architecture of distributed hybrid expert training system that can be used for the study of knowledge base of both internal and external expert systems and artificial intelligence systems that are distributed on Internet servers and other computer networks. Expert training system is based on three groups of basic principles: cybernetic, reflecting experience of previous research of systems of artificial intelligence, expert training systems; pedagogical, determining the principles, on which pedagogical design and use of expert training systems are based; psychological, determining preconditious and understanding of pupils psychics, on which the processes of design and use of expert training systems in professional training of future specialists are based.It accounts for the efficient training through the distributed knowledge via the Internet, which greatly increases the didactic capabilities of the system.

Improvement of POC-CCA Interpretation by Using Lyophilization of Urine from Patients with Schistosoma mansoni Low Worm Burden: Towards an Elimination of Doubts about the Concept of Trace.

Directory of Open Access Journals (Sweden)

Paulo Marcos Zech Coelho

2016-06-01

Full Text Available Accurate diagnostic techniques for schistosomiasis are essential for prevalence determination and identification of positive patients. A point-of-care test for detecting schistosome circulating cathodic antigen (POC-CCA has been evaluated for its accuracy in different endemic regions. This reagent strip/dipstick based assay has showed high sensitivity for individuals with high or moderate worm burden, but the interpretation of light infections is less clear, especially for trace readings.We introduced a urine lyophilization step to the POC-CCA assay to improve its sensitivity and clarify the interpretation of traces. We evaluated POC-CCA sensitivity and specificity within individuals with low parasite burdens in a Brazilian endemic area where a high number of traces were detected. Patients that were positive for other helminths were also evaluated for cross reactions. In all cases, a combined parasitological diagnosis using Kato-Katz (24 slides and Saline Gradient (1 g of feces were used as reference. At baseline, diagnosis by POC-CCA (1-2 cassettes showed 6% sensitivity, inaccurately predicting a low prevalence of Schistosoma mansoni infections (2 POC-CCA positives/32 egg positives. After urine lyophilization, the sensitivity was increased significantly (p < 0.05. Prevalence rates changed from 2% to 32% (27 POC-CCA positives/32 egg positives, equivalent to parasitological techniques. Most of the trace readings changed to positive after lyophilization while some negatives turned into traces. Cross reaction analysis confirmed the specificity of POC-CCA.Trace readings cannot be primarily defined as positive or negative cases. It is critical to verify case-by-case by concentrating urine 10 fold by lyophilization for the diagnosis. Following lyophilization, persistent trace readings should be read as negatives. No trained technician is needed and cost is restricted to the cost of a lyophilizer and the electricity to run it.

CCA 3101/4101 Environmental Humanities: The History of a Unit through an Ecopedagogical Lens

Science.gov (United States)

Ryan, John Charles

2012-01-01

In 2011 the author taught, for the first time, the well-established unit CCA3101/4101 Environmental Humanities in the School of Communications and Arts at ECU (Edith Cowan University) in Western Australia. The unit has a 20-year history through associate professor Rod Giblett and parallels the development of the environmental humanities as a field…

Proceedings 10th International Workshop on Formal Engineering Approaches to Software Components and Architectures

OpenAIRE

Buhnova, Barbora; Happe, Lucia; Kofroň, Jan

2013-01-01

These are the proceedings of the 10th International Workshop on Formal Engineering approaches to Software Components and Architectures (FESCA). The workshop was held on March 23, 2013 in Rome (Italy) as a satellite event to the European Joint Conference on Theory and Practice of Software (ETAPS'13). The aim of the FESCA workshop is to bring together both young and senior researchers from formal methods, software engineering, and industry interested in the development and application of formal...

Architectural freedom and industrialized architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

to explain that architecture can be thought as a complex and diverse design through customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performing expression in direct relation to the given context. Through the last couple of years we have...... expression in the specific housing area. It is the aim of this article to expand the different design strategies which architects can use – to give the individual project attitudes and designs with architectural quality. Through the customized component production it is possible to choose different...... for retrofit design. If we add the question of the installations e.g. ventilation to this systematic thinking of building technique we get a diverse and functional architecture, thereby creating a new and clearer story telling about new and smart system based thinking behind architectural expression....

Regressional modeling of electrodialytic removal of Cu, Cr and As from CCA treated timber waste

DEFF Research Database (Denmark)

Moreira, E.E.; Ribeiro, Alexandra B.; Mateus, Eduardo

2005-01-01

) removal of Cu, Cr and As from CCA treated timber waste. The method uses a low-level direct current as the cleaning agent, combining the electrokinetic movement of ions in the matrix with the principle of electrodialysis. The technique was tested in eight experiments using a laboratory cell on sawdust...

An SOA-based architecture framework

NARCIS (Netherlands)

Aalst, van der W.M.P.; Beisiegel, M.; Hee, van K.M.; König, D.; Stahl, C.

2007-01-01

We present an Service-Oriented Architecture (SOA)– based architecture framework. The architecture framework is designed to be close to industry standards, especially to the Service Component Architecture (SCA). The framework is language independent and the building blocks of each system, activities

3D Microstructural Architectures for Metal and Alloy Components Fabricated by 3D Printing/Additive Manufacturing Technologies

Science.gov (United States)

Martinez, E.; Murr, L. E.; Amato, K. N.; Hernandez, J.; Shindo, P. W.; Gaytan, S. M.; Ramirez, D. A.; Medina, F.; Wicker, R. B.

The layer-by-layer building of monolithic, 3D metal components from selectively melted powder layers using laser or electron beams is a novel form of 3D printing or additive manufacturing. Microstructures created in these 3D products can involve novel, directional solidification structures which can include crystallographically oriented grains containing columnar arrays of precipitates characteristic of a microstructural architecture. These microstructural architectures are advantageously rendered in 3D image constructions involving light optical microscopy and scanning and transmission electron microscopy observations. Microstructural evolution can also be effectively examined through 3D image sequences which, along with x-ray diffraction (XRD) analysis in the x-y and x-z planes, can effectively characterize related crystallographic/texture variances. This paper compares 3D microstructural architectures in Co-base and Ni-base superalloys, columnar martensitic grain structures in 17-4 PH alloy, and columnar copper oxides and dislocation arrays in copper.

Attribute-Based Signcryption: Signer Privacy, Strong Unforgeability and IND-CCA Security in Adaptive-Predicates Model (Extended Version

Directory of Open Access Journals (Sweden)

Tapas Pandit

2016-08-01

Full Text Available Attribute-Based Signcryption (ABSC is a natural extension of Attribute-Based Encryption (ABE and Attribute-Based Signature (ABS, where one can have the message confidentiality and authenticity together. Since the signer privacy is captured in security of ABS, it is quite natural to expect that the signer privacy will also be preserved in ABSC. In this paper, first we propose an ABSC scheme which is weak existential unforgeable and IND-CCA secure in adaptive-predicates models and, achieves signer privacy. Then, by applying strongly unforgeable one-time signature (OTS, the above scheme is lifted to an ABSC scheme to attain strong existential unforgeability in adaptive-predicates model. Both the ABSC schemes are constructed on common setup, i.e the public parameters and key are same for both the encryption and signature modules. Our first construction is in the flavor of CtE&S paradigm, except one extra component that will be computed using both signature components and ciphertext components. The second proposed construction follows a new paradigm (extension of CtE&S , we call it “Commit then Encrypt and Sign then Sign” (CtE&S . The last signature is generated using a strong OTS scheme. Since, the non-repudiation is achieved by CtE&S paradigm, our systems also achieve the same.

Memory architecture

NARCIS (Netherlands)

2012-01-01

A memory architecture is presented. The memory architecture comprises a first memory and a second memory. The first memory has at least a bank with a first width addressable by a single address. The second memory has a plurality of banks of a second width, said banks being addressable by components

Systems approach identifies an organic nitrogen-responsive gene network that is regulated by the master clock control gene CCA1.

Science.gov (United States)

Gutiérrez, Rodrigo A; Stokes, Trevor L; Thum, Karen; Xu, Xiaodong; Obertello, Mariana; Katari, Manpreet S; Tanurdzic, Milos; Dean, Alexis; Nero, Damion C; McClung, C Robertson; Coruzzi, Gloria M

2008-03-25

Understanding how nutrients affect gene expression will help us to understand the mechanisms controlling plant growth and development as a function of nutrient availability. Nitrate has been shown to serve as a signal for the control of gene expression in Arabidopsis. There is also evidence, on a gene-by-gene basis, that downstream products of nitrogen (N) assimilation such as glutamate (Glu) or glutamine (Gln) might serve as signals of organic N status that in turn regulate gene expression. To identify genome-wide responses to such organic N signals, Arabidopsis seedlings were transiently treated with ammonium nitrate in the presence or absence of MSX, an inhibitor of glutamine synthetase, resulting in a block of Glu/Gln synthesis. Genes that responded to organic N were identified as those whose response to ammonium nitrate treatment was blocked in the presence of MSX. We showed that some genes previously identified to be regulated by nitrate are under the control of an organic N-metabolite. Using an integrated network model of molecular interactions, we uncovered a subnetwork regulated by organic N that included CCA1 and target genes involved in N-assimilation. We validated some of the predicted interactions and showed that regulation of the master clock control gene CCA1 by Glu or a Glu-derived metabolite in turn regulates the expression of key N-assimilatory genes. Phase response curve analysis shows that distinct N-metabolites can advance or delay the CCA1 phase. Regulation of CCA1 by organic N signals may represent a novel input mechanism for N-nutrients to affect plant circadian clock function.

Effect of simulated rainfall and weathering on release of preservative elements from CCA treated wood

Science.gov (United States)

Stan Lebow; R. Sam Williams; Patricia Lebow

2003-01-01

The release of arsenic from wood pressure-treated with chromated copper arsenate (CCA) can be decreased by application of wood finishes, but little is known about the types of finishes that are best suited for this purpose. This study evaluated the effects of finish water repellent content and ultraviolet (UV) radiation on the release of arsenic, copper, and chromium...

CCA retention and its effects on the bonding performance of decommissioned treated wood: a preliminary study

Science.gov (United States)

Cheng Piao; Todd F. Shupe; Mark Gibson; Chung Y. Hse

2009-01-01

Chromated copper arsenate (CCA) continues to be widely used as a wood preservative for industrial uses in the U.S. Disposal of treated wood is a potential long-term environmental liability. Current practices for disposing of decommissioned preservative-treated wood include landfilling and incineration, which are increasingly impractical due to environmental...

Evaluation in vitro of the infection times of engorged females of Rhipicephalus (Boophilus microplus by the entomopathogenic nematode Steinernema glaseri CCA strain Avaliação in vitro dos tempos de infecção de fêmeas ingurgitadas de Rhipicephalus (Boophilus microplus pelo nematoide entomopatogênico Steinernema glaseri estirpe CCA

Directory of Open Access Journals (Sweden)

Leandro Barbiéri de Carvalho

2010-04-01

Full Text Available Studies have shown that ticks are susceptible to infection by entomopathogenic nematodes. These studies indicate different susceptibilities of ticks to infection by these fungi, depending on the tick species, development phase, entomopathogenic nematodes species and strains and the time the ticks are exposed to them. Usually this period ranges from 24 to 72 hours. The aim of this study was to evaluate the infection times in vitro of engorged Rhipicephalus (Boophilus microplus females by the entomopathogenic nematodes Steinernema glaseri CCA strain, by analysis of the ticks' biological parameters. The results show that a 2-hour exposure time was sufficient for the engorged R. microplus females to be infected by S. glaseri CCA, but that a minimum exposure time of 24 hours was necessary to generate treatment efficacy above 90%.Os carrapatos são susceptíveis à infecção por nematoides entomopatogênicos. Essa susceptibilidade diverge quanto às espécies de carrapato estudadas, à fase evolutiva, às espécies e estirpes dos nematoides e ao tempo ao qual os carrapatos ficam expostos a estes. O presente trabalho teve como objetivo avaliar os tempos de infecção in vitro de fêmeas ingurgitadas de Rhipicephalus (Boophilus microplus pelo nematoide entomopatogênico Steinernema glaseri estirpe CCA, pela análise dos parâmetros biológicos do carrapato. Os resultados obtidos demonstraram que um período de duas horas de exposição foi suficiente para que fêmeas ingurgitadas de R. microplus fossem infectadas por S. glaseri CCA e que um período de exposição mínimo de 24h foi necessário para que houvesse infecção de fêmeas ingurgitadas de R. microplus por S. glaseri estirpe CCA, capaz de gerar, in vitro, eficácia no tratamento superior a 90%.

PICNIC Architecture.

Science.gov (United States)

Saranummi, Niilo

2005-01-01

The PICNIC architecture aims at supporting inter-enterprise integration and the facilitation of collaboration between healthcare organisations. The concept of a Regional Health Economy (RHE) is introduced to illustrate the varying nature of inter-enterprise collaboration between healthcare organisations collaborating in providing health services to citizens and patients in a regional setting. The PICNIC architecture comprises a number of PICNIC IT Services, the interfaces between them and presents a way to assemble these into a functioning Regional Health Care Network meeting the needs and concerns of its stakeholders. The PICNIC architecture is presented through a number of views relevant to different stakeholder groups. The stakeholders of the first view are national and regional health authorities and policy makers. The view describes how the architecture enables the implementation of national and regional health policies, strategies and organisational structures. The stakeholders of the second view, the service viewpoint, are the care providers, health professionals, patients and citizens. The view describes how the architecture supports and enables regional care delivery and process management including continuity of care (shared care) and citizen-centred health services. The stakeholders of the third view, the engineering view, are those that design, build and implement the RHCN. The view comprises four sub views: software engineering, IT services engineering, security and data. The proposed architecture is founded into the main stream of how distributed computing environments are evolving. The architecture is realised using the web services approach. A number of well established technology platforms and generic standards exist that can be used to implement the software components. The software components that are specified in PICNIC are implemented in Open Source.

Improving the two-step remediation process for CCA-treated wood. Part I, Evaluating oxalic acid extraction

Science.gov (United States)

Carol Clausen

2004-01-01

In this study, three possible improvements to a remediation process for chromated-copper-arsenate (CCA) treated wood were evaluated. The process involves two steps: oxalic acid extraction of wood fiber followed by bacterial culture with Bacillus licheniformis CC01. The three potential improvements to the oxalic acid extraction step were (1) reusing oxalic acid for...

Intelligent CAMAC crate controller with CC-A2 functionality and VICbus interface

International Nuclear Information System (INIS)

Erven, W.; Holzer, J.; Kopp, H.; Loevenich, H.W.; Meiling, W.; Zwoll, K.; Bovier, J.; Re, G.; Worm, F.

1992-01-01

This paper reports that for nuclear physics experiments at the Julich Cooler Synchrotron COSY a data acquisition system is under development. With this background, and in order to enhance existing CAMAC systems, an intelligent CAMAC crate controller with CC-A2 functionality was developed. The main enhancement is the replacement of the Branch Highway with a new standard of inter-crate connection: the VICbus. The other highlights are: optional use of a Motorola 68030 microprocessor as CAMAC list-processor and optimization of CAMAC blocktransfers, optional Ethernet or Cheapernet connection. This controller is commercially available from CES, Geneva and called VCC 2117

Addressing Cloud Computing in Enterprise Architecture: Issues and Challenges

OpenAIRE

Khan, Khaled; Gangavarapu, Narendra

2009-01-01

This article discusses how the characteristics of cloud computing affect the enterprise architecture in four domains: business, data, application and technology. The ownership and control of architectural components are shifted from organisational perimeters to cloud providers. It argues that although cloud computing promises numerous benefits to enterprises, the shifting control from enterprises to cloud providers on architectural components introduces several architectural challenges. The d...

Information security architecture an integrated approach to security in the organization

CERN Document Server

Killmeyer, Jan

2000-01-01

An information security architecture is made up of several components. Each component in the architecture focuses on establishing acceptable levels of control. These controls are then applied to the operating environment of an organization. Functionally, information security architecture combines technical, practical, and cost-effective solutions to provide an adequate and appropriate level of security.Information Security Architecture: An Integrated Approach to Security in the Organization details the five key components of an information security architecture. It provides C-level executives

Architectures for single-chip image computing

Science.gov (United States)

Gove, Robert J.

1992-04-01

This paper will focus on the architectures of VLSI programmable processing components for image computing applications. TI, the maker of industry-leading RISC, DSP, and graphics components, has developed an architecture for a new-generation of image processors capable of implementing a plurality of image, graphics, video, and audio computing functions. We will show that the use of a single-chip heterogeneous MIMD parallel architecture best suits this class of processors--those which will dominate the desktop multimedia, document imaging, computer graphics, and visualization systems of this decade.

Evaluation of the AJCC 8th Edition Staging System for Pathologically Versus Clinically Staged Intrahepatic Cholangiocarcinoma (iCCA): a Time to Revisit a Dogma? A Surveillance, Epidemiology, and End Results (SEER) Analysis.

Science.gov (United States)

Kamarajah, Sivesh K

2018-03-07

Recently, the AJCC has released its 8th edition changes to the staging system for intrahepatic cholangiocarcinoma (iCCA). This study sought to validate the proposed changes to the 8th edition of AJCC system for T and N classification of iCCA using a population-based data set. Using the Surveillance, Epidemiology, and End Results (SEER) database (1998-2013), patients undergoing resection or non-surgical management for non-metastatic iCCA were identified. Overall survival was estimated using the Kaplan-Meier method and compared using log-rank tests. Concordance indices (c-indices) calculated from Cox proportional hazards models were calculated to evaluate discriminatory power. The study included 2630 patients resected (37%) or non-surgically managed (63%) for iCCA. Nodal staging was performed in 56%, of whom 31% had positive nodes. For all patients with iCCA, the median 5-year survival by AJCC T classification for T1a, T1b, T2, T3, and T4 was 32, 21, 14, 10, and 10 months, respectively (p < 0.001). The concordance index for the staging system was 0.57 for all patients, 0.62 for those who underwent resection, and 0.54 for patients who did not undergo resection. In summary, the new AJCC 8th edition staging system is comparable to the 7th edition and valid in stratifying patients with iCCA. However, the performance of the staging system is better in patients undergoing surgical resection than those undergoing non-surgical management. These findings further highlight the need for improved accuracy of radiological imaging in clinically staging patients to guide prognosis.

An empirical study of software architectures' effect on product quality

DEFF Research Database (Denmark)

Hansen, Klaus Marius; Jonasson, Kristjan; Neukirchen, Helmut

2011-01-01

Software architectures shift the focus of developers from lines-of-code to coarser-grained components and their interconnection structure. Unlike 2ne-grained objects, these components typically encompass business functionality and need to be aware of the underlying business processes. Hence......, the interface of a component should re4ect relevant parts of the business process and the software architecture should emphasize the coordination among components. To shed light on these issues, we provide a framework for component-based software architectures focusing on the process perspective. The interface...

Aspects for Run-time Component Integration

DEFF Research Database (Denmark)

Truyen, Eddy; Jørgensen, Bo Nørregaard; Joosen, Wouter

2000-01-01

Component framework technology has become the cornerstone of building a family of systems and applications. A component framework defines a generic architecture into which specialized components can be plugged. As such, the component framework leverages the glue that connects the different inserted...... to dynamically integrate into the architecture of middleware systems new services that support non-functional aspects such as security, transactions, real-time....

Conceptual service architecture for adaptive mobile location services

DEFF Research Database (Denmark)

Schou, Saowanee

2008-01-01

This paper presents a conceptual service architecture for adaptive mobile location services designed to be used on the next generation wireless network. The developed service architecture consists of a set of concepts, principles, rules and guidelines for constructing, deploying, and operating...... the mobile location services. The service architecture identifies the components required to build the mobile location services and describes how these components are combined and how they should interact. As a means of exploring the developed conceptual service architecture, an illustrative case study...... of a new-concept tracking service is chosen to demonstrate the applicability of the architecture. Through the case study, the service request and response processes will be illustrated. New possible service functions provided by the developed service architecture will be examined and discussed...

Applying of component system development in object methodology

Directory of Open Access Journals (Sweden)

Milan Mišovič

2013-01-01

Full Text Available In the last three decades, the concept and implementation of component-based architectures have been promoted in software systems creation. Increasingly complex demands are placed on the software component systems, in particular relating to the dynamic properties. The emergence of such requirements has been gradually enforced by the practice of development and implementation of these systems, especially for information systems software.Just the information systems (robust IS of different types require that target software meets their requirements. Among other things, we mean primarily the adaptive processes of different domains, high distributives due to the possibilities of the Internet 2.0, acceptance of high integrity of life domains (process, data and communications integrity, scalability, and flexible adaptation to process changes, a good context for external devices and transparent structure of the sub-process modules and architectural units.Of course, the target software of required qualities and the type robust cannot be a monolith. As commonly known, development of design toward information systems software has clearly come to the need for the software composition of completely autonomous, but cooperating architectural units that communicate with each other using messages of prescribed formats.Although for such units there were often used the so called subsystems and modules, see (Jac, Boo, Rumbo, 1998 and (Arlo, Neus, 2007, their abstraction being gradually enacted as the term component. In other words, the subsystems and modules are specific types of components.In (Král, Žeml, 2000 and (Král, Žeml, 2003 there are considered two types of target software of information systems. The first type – there are SWC (Software Components, composed of permanently available components, which are thought as services – Confederate software. The second type – SWA (Software Alliance, called semi Confederate, formed during the run-time of the

The Role of Environmentally Conscious Architecture and Planning As Components of Future National Development Plans in Egypt

Directory of Open Access Journals (Sweden)

Karim M. Ayyad

2013-10-01

Full Text Available Egypt has been experiencing challenging economic, social and political disturbance during the end of the twentieth century and towards the beginning of the twenty-first. With its fast expanding population, high consumption rate and economic deficit, the Egyptian community continues to experience a low quality of living. These issues contributed greatly to the uprising, following the Tunisian model, in January, 2011. However, the political change that followed did not help a lot, as development strategies are still far from being sustainable. In the beginning of the millennium, Egypt experienced an 8.6% energy deficit, followed by a growing energy crisis [1]. Knowing that almost 50% of the energy produced in Egypt is consumed inside buildings [2], environmentally conscious architecture can be a very powerful tool in development plans, as it can reasonably reduce the consumption of energy and other resources and enhance the quality of living for people. This work analyzes the supposed role of environmentally conscious architecture and, hence, evaluates its importance as a major component of national development plans in the near future. The analysis encompasses a review of the status quo in terms of consumption patterns and required services and, then, compares it with the case in which environmentally conscious architecture is adopted.

GITEWS, an extensible and open integration platform for manifold sensor systems and processing components based on Sensor Web Enablement and the principles of Service Oriented Architectures

Science.gov (United States)

Haener, Rainer; Waechter, Joachim; Fleischer, Jens; Herrnkind, Stefan; Schwarting, Herrmann

2010-05-01

The German Indonesian Tsunami Early Warning System (GITEWS) is a multifaceted system consisting of various sensor types like seismometers, sea level sensors or GPS stations, and processing components, all with their own system behavior and proprietary data structure. To operate a warning chain, beginning from measurements scaling up to warning products, all components have to interact in a correct way, both syntactically and semantically. Designing the system great emphasis was laid on conformity to the Sensor Web Enablement (SWE) specification by the Open Geospatial Consortium (OGC). The technical infrastructure, the so called Tsunami Service Bus (TSB) follows the blueprint of Service Oriented Architectures (SOA). The TSB is an integration concept (SWE) where functionality (observe, task, notify, alert, and process) is grouped around business processes (Monitoring, Decision Support, Sensor Management) and packaged as interoperable services (SAS, SOS, SPS, WNS). The benefits of using a flexible architecture together with SWE lead to an open integration platform: • accessing and controlling heterogeneous sensors in a uniform way (Functional Integration) • assigns functionality to distinct services (Separation of Concerns) • allows resilient relationship between systems (Loose Coupling) • integrates services so that they can be accessed from everywhere (Location Transparency) • enables infrastructures which integrate heterogeneous applications (Encapsulation) • allows combination of services (Orchestration) and data exchange within business processes Warning systems will evolve over time: New sensor types might be added, old sensors will be replaced and processing components will be improved. From a collection of few basic services it shall be possible to compose more complex functionality essential for specific warning systems. Given these requirements a flexible infrastructure is a prerequisite for sustainable systems and their architecture must be

Drawing-Based Procedural Modeling of Chinese Architectures.

Science.gov (United States)

Fei Hou; Yue Qi; Hong Qin

2012-01-01

This paper presents a novel modeling framework to build 3D models of Chinese architectures from elevation drawing. Our algorithm integrates the capability of automatic drawing recognition with powerful procedural modeling to extract production rules from elevation drawing. First, different from the previous symbol-based floor plan recognition, based on the novel concept of repetitive pattern trees, small horizontal repetitive regions of the elevation drawing are clustered in a bottom-up manner to form architectural components with maximum repetition, which collectively serve as building blocks for 3D model generation. Second, to discover the global architectural structure and its components' interdependencies, the components are structured into a shape tree in a top-down subdivision manner and recognized hierarchically at each level of the shape tree based on Markov Random Fields (MRFs). Third, shape grammar rules can be derived to construct 3D semantic model and its possible variations with the help of a 3D component repository. The salient contribution lies in the novel integration of procedural modeling with elevation drawing, with a unique application to Chinese architectures.

A Pattern Language for the Evolution of Component-based Software Architectures

DEFF Research Database (Denmark)

Ahmad, Aakash; Jamshidi, Pooyan; Pahl, Claus

2013-01-01

Modern software systems are prone to a continuous evolution under frequently varying requirements. Architecture-centric software evolution enables change in system’s structure and behavior while maintaining a global view of the software to address evolution-centric tradeoffs. Lehman’s law...... evolution problems. We propose that architectural evolution process requires an explicit evolution-centric knowledge – that can be discovered, shared, and reused – to anticipate and guide change management. Therefore, we present a pattern language as a collection of interconnected change patterns......) as a complementary and integrated phase to facilitate reuse-driven architecture change execution (pattern language application). Reuse-knowledge in the proposed pattern language is expressed as a formalised collection of interconnected-patterns. Individual patterns in the language build on each other to facilitate...

Insider Threat Security Reference Architecture

Science.gov (United States)

2012-04-01

this challenge. CMU/SEI-2012-TR-007 | 2 2 The Components of the ITSRA Figure 2 shows the four layers of the ITSRA. The Business Security layer......organizations improve their level of preparedness to address the insider threat. Business Security Architecture Data Security Architecture

The Software Architecture of Global Climate Models

Science.gov (United States)

Alexander, K. A.; Easterbrook, S. M.

2011-12-01

It has become common to compare and contrast the output of multiple global climate models (GCMs), such as in the Climate Model Intercomparison Project Phase 5 (CMIP5). However, intercomparisons of the software architecture of GCMs are almost nonexistent. In this qualitative study of seven GCMs from Canada, the United States, and Europe, we attempt to fill this gap in research. We describe the various representations of the climate system as computer programs, and account for architectural differences between models. Most GCMs now practice component-based software engineering, where Earth system components (such as the atmosphere or land surface) are present as highly encapsulated sub-models. This architecture facilitates a mix-and-match approach to climate modelling that allows for convenient sharing of model components between institutions, but it also leads to difficulty when choosing where to draw the lines between systems that are not encapsulated in the real world, such as sea ice. We also examine different styles of couplers in GCMs, which manage interaction and data flow between components. Finally, we pay particular attention to the varying levels of complexity in GCMs, both between and within models. Many GCMs have some components that are significantly more complex than others, a phenomenon which can be explained by the respective institution's research goals as well as the origin of the model components. In conclusion, although some features of software architecture have been adopted by every GCM we examined, other features show a wide range of different design choices and strategies. These architectural differences may provide new insights into variability and spread between models.

Layered distributed architecture for plant automation

International Nuclear Information System (INIS)

Aravamuthan, G.; Verma, Yachika; Ranjan, Jyoti; Chachondia, Alka S.; Ganesh, G.

2005-01-01

The development of plant automation system and associated software remains one of the greatest challenges to the widespread implementation of highly adaptive re-configurable automation technology. This paper presents a layered distributed architecture for a plant automation system designed to support rapid reconfiguration and redeployment of automation components. The paper first presents evolution of automation architecture and their associated environment in the past few decades and then presents the concept of layered system architecture and the use of automation components to support the construction of a wide variety of automation system. It also highlights the role of standards and technology, which can be used in the development of automation components. We have attempted to adhere to open standards and technology for the development of automation component at a various layers. It also highlights the application of this concept in the development of an Operator Information System (OIS) for Advanced Heavy Water Reactor (AHWR). (author)

A comparative study on Cu, Cr and As removal from CCA-treated wood waste by dialytic and electrodialytic processes

DEFF Research Database (Denmark)

Velizarova, Emiliya; Ribeiro, Alexandra B.; Ottosen, Lisbeth M.

2002-01-01

In this study, electrodialytic and dialytic techniques were used for Cu, Cr and As removal from 20-years out-of-service CCA-treated Pinus pinaster Ait. pole. The effect of applying direct current, as "cleaning agent", of up to 120mA was investigated. Focus was given to a parallel comparison...

Fixation effects on the release of copper, chromium and arsenic from CCA-C treated marine piles

Science.gov (United States)

Stan Lebow

1999-01-01

This study sought to determine the effect of fixation time and temperature on the release of copper, chromium and arsenic from treated marine piles immersed in seawater under "worst case" conditions. Sections of piles were CCA-C treated to a target retention of 2.5 lbs/ft3) (40 kg/m3) and then allowed to Condition at 36°F (2°C) for either 3, 7 or 20 days. As...

Application of colony complex algorithm to nuclear component optimization design

International Nuclear Information System (INIS)

Yan Changqi; Li Guijing; Wang Jianjun

2014-01-01

Complex algorithm (CA) has got popular application to the region of nuclear engineering. In connection with the specific features of the application of traditional complex algorithm (TCA) to the optimization design in engineering structures, an improved method, colony complex algorithm (CCA), was developed based on the optimal combination of many complexes, in which the disadvantages of TCA were overcame. The optimized results of benchmark function show that CCA has better optimizing performance than TCA. CCA was applied to the high-pressure heater optimization design, and the optimization effect is obvious. (authors)

A Reference Architecture for Space Information Management

Science.gov (United States)

Mattmann, Chris A.; Crichton, Daniel J.; Hughes, J. Steven; Ramirez, Paul M.; Berrios, Daniel C.

2006-01-01

We describe a reference architecture for space information management systems that elegantly overcomes the rigid design of common information systems in many domains. The reference architecture consists of a set of flexible, reusable, independent models and software components that function in unison, but remain separately managed entities. The main guiding principle of the reference architecture is to separate the various models of information (e.g., data, metadata, etc.) from implemented system code, allowing each to evolve independently. System modularity, systems interoperability, and dynamic evolution of information system components are the primary benefits of the design of the architecture. The architecture requires the use of information models that are substantially more advanced than those used by the vast majority of information systems. These models are more expressive and can be more easily modularized, distributed and maintained than simpler models e.g., configuration files and data dictionaries. Our current work focuses on formalizing the architecture within a CCSDS Green Book and evaluating the architecture within the context of the C3I initiative.

Advanced and secure architectural EHR approaches.

Science.gov (United States)

Blobel, Bernd

2006-01-01

Electronic Health Records (EHRs) provided as a lifelong patient record advance towards core applications of distributed and co-operating health information systems and health networks. For meeting the challenge of scalable, flexible, portable, secure EHR systems, the underlying EHR architecture must be based on the component paradigm and model driven, separating platform-independent and platform-specific models. Allowing manageable models, real systems must be decomposed and simplified. The resulting modelling approach has to follow the ISO Reference Model - Open Distributing Processing (RM-ODP). The ISO RM-ODP describes any system component from different perspectives. Platform-independent perspectives contain the enterprise view (business process, policies, scenarios, use cases), the information view (classes and associations) and the computational view (composition and decomposition), whereas platform-specific perspectives concern the engineering view (physical distribution and realisation) and the technology view (implementation details from protocols up to education and training) on system components. Those views have to be established for components reflecting aspects of all domains involved in healthcare environments including administrative, legal, medical, technical, etc. Thus, security-related component models reflecting all view mentioned have to be established for enabling both application and communication security services as integral part of the system's architecture. Beside decomposition and simplification of system regarding the different viewpoint on their components, different levels of systems' granularity can be defined hiding internals or focusing on properties of basic components to form a more complex structure. The resulting models describe both structure and behaviour of component-based systems. The described approach has been deployed in different projects defining EHR systems and their underlying architectural principles. In that context

Sourcing from an Enterprise Architecture Perspective

DEFF Research Database (Denmark)

Gøtze, John; Axél, Mette

2013-01-01

Enterprise architecture offers direct input in order to define the appropriate combination of people, components and services used to produce and deliver products and services. Sourcing, as the process of optimally organizing and procuring this inside and outside an organization, is therefore...... a central enterprise architecture concern. In this chapter we will discuss how enterprise architecture can benefit an enterprise’s sourcing strategy....

A Flexible Component based Access Control Architecture for OPeNDAP Services

Science.gov (United States)

Kershaw, Philip; Ananthakrishnan, Rachana; Cinquini, Luca; Lawrence, Bryan; Pascoe, Stephen; Siebenlist, Frank

2010-05-01

Network data access services such as OPeNDAP enable widespread access to data across user communities. However, without ready means to restrict access to data for such services, data providers and data owners are constrained from making their data more widely available. Even with such capability, the range of different security technologies available can make interoperability between services and user client tools a challenge. OPeNDAP is a key data access service in the infrastructure under development to support the CMIP5 (Couple Model Intercomparison Project Phase 5). The work is being carried out as part of an international collaboration including the US Earth System Grid and Curator projects and the EU funded IS-ENES and Metafor projects. This infrastructure will bring together Petabytes of climate model data and associated metadata from over twenty modelling centres around the world in a federation with a core archive mirrored at three data centres. A security system is needed to meet the requirements of organisations responsible for model data including the ability to restrict data access to registered users, keep them up to date with changes to data and services, audit access and protect finite computing resources. Individual organisations have existing tools and services such as OPeNDAP with which users in the climate research community are already familiar. The security system should overlay access control in a way which maintains the usability and ease of access to these services. The BADC (British Atmospheric Data Centre) has been working in collaboration with the Earth System Grid development team and partner organisations to develop the security architecture. OpenID and MyProxy were selected at an early stage in the ESG project to provide single sign-on capability across the federation of participating organisations. Building on the existing OPeNDAP specification an architecture based on pluggable server side components has been developed at the BADC

The Acoustical Properties of the Polyurethane Concrete Made of Oyster Shell Waste Comparing Other Concretes as Architectural Design Components

Science.gov (United States)

Setyowati, Erni; Hardiman, Gagoek; Purwanto

2018-02-01

This research aims to determine the acoustical properties of concrete material made of polyurethane and oyster shell waste as both fine aggregate and coarse aggregate comparing to other concrete mortar. Architecture needs aesthetics materials, so the innovation in architectural material should be driven through the efforts of research on materials for building designs. The DOE methods was used by mixing cement, oyster shell, sands, and polyurethane by composition of 160 ml:40 ml:100 ml: 120 ml respectively. Refer to the results of previous research, then cement consumption is reduced up to 20% to keep the concept of green material. This study compared three different compositions of mortars, namely portland cement concrete with gravel (PCG), polyurethane concrete of oyster shell (PCO) and concrete with plastics aggregate (PCP). The methods of acoustical tests were conducted refer to the ASTM E413-04 standard. The research results showed that polyurethane concrete with oyster shell waste aggregate has absorption coefficient 0.52 and STL 63 dB and has a more beautiful appearance when it was pressed into moulding. It can be concluded that polyurethane concrete with oyster shell aggregate (PCO) is well implemented in architectural acoustics-components.

Reflective Self-Regenerative Systems Architecture Study

National Research Council Canada - National Science Library

Pu, Carlton; Blough, Douglas

2006-01-01

In this study, we develop the Reflective Self-Regenerative Systems (RSRS) architecture in detail, describing the internal structure of each component and the mutual invocations among the components...

Open software architecture for east articulated maintenance arm

International Nuclear Information System (INIS)

Wu, Jing; Wu, Huapeng; Song, Yuntao; Li, Ming; Yang, Yang; Alcina, Daniel A.M.

2016-01-01

Highlights: • A software requirement of serial-articulated robot for EAST assembly and maintains is presented. • A open software architecture of the robot is developed. • A component-based model distribution system with real-time communication of the robot is constructed. - Abstract: For the inside inspection and the maintenance of vacuum vessel in the EAST, an articulated maintenance arm is developed. In this article, an open software architecture developed for the EAST articulated maintenance arm (EAMA) is described, which offers a robust and proper performance and easy-going experience based on standard open robotic platform OROCOS. The paper presents a component-based model software architecture using multi-layer structure: end layer, up layer, middle, and down layer. In the end layer the components are defined off-line in the task planner manner. The components in up layer complete the function of trajectory plan. The CORBA, as a communication framework, is adopted to exchange the data between the distributed components. The contributors use Real-Time Workshop from the MATLAB/Simulink to generate the components in the middle layer. Real-time Toolkit guarantees control applications running in the hard real-time mode. Ethernets and the CAN bus are used for data transfer in the down layer, where the components implement the hardware functions. The distributed architecture of control system associates each processing node with each joint, which is mapped to a component with all functioning features of the framework.

Open software architecture for east articulated maintenance arm

Energy Technology Data Exchange (ETDEWEB)

Wu, Jing, E-mail: wujing@ipp.ac.cn [Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Rd Hefei Anhui (China); Lappeenranta University of Technology, Skinnarilankatu 34 Lappeenranta (Finland); Wu, Huapeng [Lappeenranta University of Technology, Skinnarilankatu 34 Lappeenranta (Finland); Song, Yuntao [Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Rd Hefei Anhui (China); Li, Ming [Lappeenranta University of Technology, Skinnarilankatu 34 Lappeenranta (Finland); Yang, Yang [Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Rd Hefei Anhui (China); Alcina, Daniel A.M. [Lappeenranta University of Technology, Skinnarilankatu 34 Lappeenranta (Finland)

2016-11-01

Highlights: • A software requirement of serial-articulated robot for EAST assembly and maintains is presented. • A open software architecture of the robot is developed. • A component-based model distribution system with real-time communication of the robot is constructed. - Abstract: For the inside inspection and the maintenance of vacuum vessel in the EAST, an articulated maintenance arm is developed. In this article, an open software architecture developed for the EAST articulated maintenance arm (EAMA) is described, which offers a robust and proper performance and easy-going experience based on standard open robotic platform OROCOS. The paper presents a component-based model software architecture using multi-layer structure: end layer, up layer, middle, and down layer. In the end layer the components are defined off-line in the task planner manner. The components in up layer complete the function of trajectory plan. The CORBA, as a communication framework, is adopted to exchange the data between the distributed components. The contributors use Real-Time Workshop from the MATLAB/Simulink to generate the components in the middle layer. Real-time Toolkit guarantees control applications running in the hard real-time mode. Ethernets and the CAN bus are used for data transfer in the down layer, where the components implement the hardware functions. The distributed architecture of control system associates each processing node with each joint, which is mapped to a component with all functioning features of the framework.

Effect of weathering on chromated copper arsenate (CCA) treated wood : leaching of metal salts and change in water repellency

Science.gov (United States)

R. Sam Williams; Stan Lebow; Patricia Lebow

2003-01-01

Wood pressure-treated with chromated copper arsenate (CCA) wood preservative is commonly used for outdoor construction. Oxides of arsenic, copper, and chromium are bound in the wood by a complex series of chemical reactions, but a small percentage of these compounds are gradually released by leaching and weathering. Recent studies suggest that the release of these...

Teaching Case: Enterprise Architecture Specification Case Study

Science.gov (United States)

Steenkamp, Annette Lerine; Alawdah, Amal; Almasri, Osama; Gai, Keke; Khattab, Nidal; Swaby, Carval; Abaas, Ramy

2013-01-01

A graduate course in enterprise architecture had a team project component in which a real-world business case, provided by an industry sponsor, formed the basis of the project charter and the architecture statement of work. The paper aims to share the team project experience on developing the architecture specifications based on the business case…

Digitally-Driven Architecture

Directory of Open Access Journals (Sweden)

Henriette Bier

2014-07-01

Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisation focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means.In this context, this sixth Footprint issue examines the influence of digital means as pragmatic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sens­ing, actuating, or other mechanisms that enable buildings to inter­act with their users and surroundings in real time in the real world through physical or sensory change and variation.

A Proposal of Client Application Architecture using Loosely Coupled Component Connection Method in Banking Branch System

Science.gov (United States)

Someya, Harushi; Mori, Yuichi; Abe, Masahiro; Machida, Isamu; Hasegawa, Atsushi; Yoshie, Osamu

Due to the deregulation of financial industry, the branches in banking industry need to shift to the sales-oriented bases from the operation-oriented bases. For corresponding to this movement, new banking branch systems are being developed. It is the main characteristics of new systems that we bring the form operations that have traditionally been performed at each branch into the centralized operation center for the purpose of rationalization and efficiency of the form operations. The branches treat a wide variety of forms. The forms can be described by common items in many cases, but the items include the different business logic and each form has the different relation among the items. And there is a need to develop the client application by user oneself. Consequently the challenge is to arrange the development environment that is high reusable, easy customizable and user developable. We propose a client application architecture that has a loosely coupled component connection method, and allows developing the applications by only describing the screen configurations and their transitions in XML documents. By adopting our architecture, we developed client applications of the centralized operation center for the latest banking branch system. Our experiments demonstrate good performances.

Relational Architecture

DEFF Research Database (Denmark)

Reeh, Henrik

2018-01-01

in a scholarly institution (element #3), as well as the certified PhD scholar (element #4) and the architectural profession, notably its labour market (element #5). This first layer outlines the contemporary context which allows architectural research to take place in a dynamic relationship to doctoral education...... a human and institutional development going on since around 1990 when the present PhD institution was first implemented in Denmark. To be sure, the model is centred around the PhD dissertation (element #1). But it involves four more components: the PhD candidate (element #2), his or her supervisor...... and interrelated fields in which history, place, and sound come to emphasize architecture’s relational qualities rather than the apparent three-dimensional solidity of constructed space. A third layer of relational architecture is at stake in the professional experiences after the defence of the authors...

EAP high-level product architecture

DEFF Research Database (Denmark)

Guðlaugsson, Tómas Vignir; Mortensen, Niels Henrik; Sarban, Rahimullah

2013-01-01

EAP technology has the potential to be used in a wide range of applications. This poses the challenge to the EAP component manufacturers to develop components for a wide variety of products. Danfoss Polypower A/S is developing an EAP technology platform, which can form the basis for a variety...... of EAP technology products while keeping complexity under control. High level product architecture has been developed for the mechanical part of EAP transducers, as the foundation for platform development. A generic description of an EAP transducer forms the core of the high level product architecture...... the function of the EAP transducers to be changed, by basing the EAP transducers on a different combination of organ alternatives. A model providing an overview of the high level product architecture has been developed to support daily development and cooperation across development teams. The platform approach...

Architectural Design of a LMS with LTSA-Conformance

Science.gov (United States)

Sengupta, Souvik; Dasgupta, Ranjan

2017-01-01

This paper illustrates an approach for architectural design of a Learning Management System (LMS), which is verifiable against the Learning Technology System Architecture (LTSA) conformance rules. We introduce a new method for software architectural design that extends the Unified Modeling Language (UML) component diagram with the formal…

The NASA Integrated Information Technology Architecture

Science.gov (United States)

Baldridge, Tim

1997-01-01

of IT systems, 3) the Technical Architecture: a common, vendor-independent framework for design, integration and implementation of IT systems and 4) the Product Architecture: vendor=specific IT solutions. The Systems Architecture is effectively a description of the end-user "requirements". Generalized end-user requirements are discussed and subsequently organized into specific mission and project functions. The Technical Architecture depicts the framework, and relationship, of the specific IT components that enable the end-user functionality as described in the Systems Architecture. The primary components as described in the Technical Architecture are: 1) Applications: Basic Client Component, Object Creation Applications, Collaborative Applications, Object Analysis Applications, 2) Services: Messaging, Information Broker, Collaboration, Distributed Processing, and 3) Infrastructure: Network, Security, Directory, Certificate Management, Enterprise Management and File System. This Architecture also provides specific Implementation Recommendations, the most significant of which is the recognition of IT as core to NASA activities and defines a plan, which is aligned with the NASA strategic planning processes, for keeping the Architecture alive and useful.

Statistics of Shared Components in Complex Component Systems

Science.gov (United States)

Mazzolini, Andrea; Gherardi, Marco; Caselle, Michele; Cosentino Lagomarsino, Marco; Osella, Matteo

2018-04-01

Many complex systems are modular. Such systems can be represented as "component systems," i.e., sets of elementary components, such as LEGO bricks in LEGO sets. The bricks found in a LEGO set reflect a target architecture, which can be built following a set-specific list of instructions. In other component systems, instead, the underlying functional design and constraints are not obvious a priori, and their detection is often a challenge of both scientific and practical importance, requiring a clear understanding of component statistics. Importantly, some quantitative invariants appear to be common to many component systems, most notably a common broad distribution of component abundances, which often resembles the well-known Zipf's law. Such "laws" affect in a general and nontrivial way the component statistics, potentially hindering the identification of system-specific functional constraints or generative processes. Here, we specifically focus on the statistics of shared components, i.e., the distribution of the number of components shared by different system realizations, such as the common bricks found in different LEGO sets. To account for the effects of component heterogeneity, we consider a simple null model, which builds system realizations by random draws from a universe of possible components. Under general assumptions on abundance heterogeneity, we provide analytical estimates of component occurrence, which quantify exhaustively the statistics of shared components. Surprisingly, this simple null model can positively explain important features of empirical component-occurrence distributions obtained from large-scale data on bacterial genomes, LEGO sets, and book chapters. Specific architectural features and functional constraints can be detected from occurrence patterns as deviations from these null predictions, as we show for the illustrative case of the "core" genome in bacteria.

Rapid microwave-assisted acid extraction of southern pine waste wood to remove metals from chromated copper arsenate (CCA) treatment

Science.gov (United States)

Chung-Yun Hse; Todd F. Shupe; Bin Yu

2013-01-01

Recovery of metals from chromated copper arsenate (CCA)-treated southern pine wood particles was investigated by extraction in a microwave reactor with binary combinations of acetic acid (AA), oxalic acid (OxA), and phosphoric acid (PhA). Use of OxA was not successful, as insoluble copper oxalate complexes impeded copper removal. The combination of OxA and AA also had...

Digitally-Driven Architecture

Directory of Open Access Journals (Sweden)

Henriette Bier

2010-06-01

Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisa­tion focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means. In this context, this sixth Footprint issue examines the influence of digital means as prag­matic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sens­ing, actuating, or other mechanisms that enable buildings to inter­act with their users and surroundings in real time in the real world through physical or sensory change and variation.

Flexible weapons architecture design

Science.gov (United States)

Pyant, William C., III

Present day air-delivered weapons are of a closed architecture, with little to no ability to tailor the weapon for the individual engagement. The closed architectures require weaponeers to make the target fit the weapon instead of fitting the individual weapons to a target. The concept of a flexible weapons aims to modularize weapons design using an open architecture shell into which different modules are inserted to achieve the desired target fractional damage while reducing cost and civilian casualties. This thesis shows that the architecture design factors of damage mechanism, fusing, weapons weight, guidance, and propulsion are significant in enhancing weapon performance objectives, and would benefit from modularization. Additionally, this thesis constructs an algorithm that can be used to design a weapon set for a particular target class based on these modular components.

Toward a Fault Tolerant Architecture for Vital Medical-Based Wearable Computing.

Science.gov (United States)

Abdali-Mohammadi, Fardin; Bajalan, Vahid; Fathi, Abdolhossein

2015-12-01

Advancements in computers and electronic technologies have led to the emergence of a new generation of efficient small intelligent systems. The products of such technologies might include Smartphones and wearable devices, which have attracted the attention of medical applications. These products are used less in critical medical applications because of their resource constraint and failure sensitivity. This is due to the fact that without safety considerations, small-integrated hardware will endanger patients' lives. Therefore, proposing some principals is required to construct wearable systems in healthcare so that the existing concerns are dealt with. Accordingly, this paper proposes an architecture for constructing wearable systems in critical medical applications. The proposed architecture is a three-tier one, supporting data flow from body sensors to cloud. The tiers of this architecture include wearable computers, mobile computing, and mobile cloud computing. One of the features of this architecture is its high possible fault tolerance due to the nature of its components. Moreover, the required protocols are presented to coordinate the components of this architecture. Finally, the reliability of this architecture is assessed by simulating the architecture and its components, and other aspects of the proposed architecture are discussed.

Software Architecture Evolution

Science.gov (United States)

2013-12-01

system’s major components occurring via a Java Message Service message bus [69]. This architecture was designed to promote loose coupling of soft- ware...play reconfiguration of the system. The components were Java -based and platform-independent; the interfaces by which they communicated were based on...The MPCS database, a MySQL database used for storing telemetry as well as some other information, such as logs and commanding data [68]. This

Architectural Synthesis of Flow-Based Microfluidic Large-Scale Integration Biochips

DEFF Research Database (Denmark)

Minhass, Wajid Hassan; Pop, Paul; Madsen, Jan

2012-01-01

,we propose a top-down architectural synthesis methodology for the flow-based biochips. Starting from a given biochemical application and a microfluidic component library, we are interested in synthesizing a biochip architecture, i.e., performing component allocation from the library based on the biochemical....... By combining several microvalves, more complex units, such as micropumps, switches, mixers, and multiplexers, can be built. The manufacturing technology, soft lithography, used for the flow-based biochips is advancing faster than Moore's law, resulting in increased architectural complexity. However...... by synthesizing architectures for real-life applications as well as synthetic benchmarks....

Genetic Components of Root Architecture Remodeling in Response to Salt Stress

KAUST Repository

Julkowska, Magdalena; Koevoets, Iko Tamar; Mol, Selena; Hoefsloot, Huub CJ; Feron, Richard; Tester, Mark A.; Keurentjes, Joost J.B.; Korte, Arthur; Haring, Michel A; de Boer, Gert-Jan; Testerink, Christa

2017-01-01

Salinity of the soil is highly detrimental to plant growth. Plants respond by a redistribution of root mass between main and lateral roots, yet the genetic machinery underlying this process is still largely unknown. Here, we describe the natural variation among 347 Arabidopsis thaliana accessions in root system architecture (RSA) and identify the traits with highest natural variation in their response to salt. Salt-induced changes in RSA were associated with 100 genetic loci using genome-wide association studies (GWAS). Two candidate loci associated with lateral root development were validated and further investigated. Changes in CYP79B2 expression in salt stress positively correlated with lateral root development in accessions, and cyp79b2 cyp79b3 double mutants developed fewer and shorter lateral roots under salt stress, but not in control conditions. By contrast, high HKT1 expression in the root repressed lateral root development, which could be partially rescued by addition of potassium. The collected data and Multi-Variate analysis of multiple RSA traits, available through the Salt_NV_Root App, capture root responses to salinity. Together, our results provide a better understanding of effective RSA remodeling responses, and the genetic components involved, for plant performance in stress conditions.

Genetic Components of Root Architecture Remodeling in Response to Salt Stress

KAUST Repository

Julkowska, Magdalena

2017-11-07

Salinity of the soil is highly detrimental to plant growth. Plants respond by a redistribution of root mass between main and lateral roots, yet the genetic machinery underlying this process is still largely unknown. Here, we describe the natural variation among 347 Arabidopsis thaliana accessions in root system architecture (RSA) and identify the traits with highest natural variation in their response to salt. Salt-induced changes in RSA were associated with 100 genetic loci using genome-wide association studies (GWAS). Two candidate loci associated with lateral root development were validated and further investigated. Changes in CYP79B2 expression in salt stress positively correlated with lateral root development in accessions, and cyp79b2 cyp79b3 double mutants developed fewer and shorter lateral roots under salt stress, but not in control conditions. By contrast, high HKT1 expression in the root repressed lateral root development, which could be partially rescued by addition of potassium. The collected data and Multi-Variate analysis of multiple RSA traits, available through the Salt_NV_Root App, capture root responses to salinity. Together, our results provide a better understanding of effective RSA remodeling responses, and the genetic components involved, for plant performance in stress conditions.

Statistics of Shared Components in Complex Component Systems

Directory of Open Access Journals (Sweden)

Andrea Mazzolini

2018-04-01

Full Text Available Many complex systems are modular. Such systems can be represented as “component systems,” i.e., sets of elementary components, such as LEGO bricks in LEGO sets. The bricks found in a LEGO set reflect a target architecture, which can be built following a set-specific list of instructions. In other component systems, instead, the underlying functional design and constraints are not obvious a priori, and their detection is often a challenge of both scientific and practical importance, requiring a clear understanding of component statistics. Importantly, some quantitative invariants appear to be common to many component systems, most notably a common broad distribution of component abundances, which often resembles the well-known Zipf’s law. Such “laws” affect in a general and nontrivial way the component statistics, potentially hindering the identification of system-specific functional constraints or generative processes. Here, we specifically focus on the statistics of shared components, i.e., the distribution of the number of components shared by different system realizations, such as the common bricks found in different LEGO sets. To account for the effects of component heterogeneity, we consider a simple null model, which builds system realizations by random draws from a universe of possible components. Under general assumptions on abundance heterogeneity, we provide analytical estimates of component occurrence, which quantify exhaustively the statistics of shared components. Surprisingly, this simple null model can positively explain important features of empirical component-occurrence distributions obtained from large-scale data on bacterial genomes, LEGO sets, and book chapters. Specific architectural features and functional constraints can be detected from occurrence patterns as deviations from these null predictions, as we show for the illustrative case of the “core” genome in bacteria.

Optical linear algebra processors - Architectures and algorithms

Science.gov (United States)

Casasent, David

1986-01-01

Attention is given to the component design and optical configuration features of a generic optical linear algebra processor (OLAP) architecture, as well as the large number of OLAP architectures, number representations, algorithms and applications encountered in current literature. Number-representation issues associated with bipolar and complex-valued data representations, high-accuracy (including floating point) performance, and the base or radix to be employed, are discussed, together with case studies on a space-integrating frequency-multiplexed architecture and a hybrid space-integrating and time-integrating multichannel architecture.

Space Elevators Preliminary Architectural View

Science.gov (United States)

Pullum, L.; Swan, P. A.

Space Systems Architecture has been expanded into a process by the US Department of Defense for their large scale systems of systems development programs. This paper uses the steps in the process to establishes a framework for Space Elevator systems to be developed and provides a methodology to manage complexity. This new approach to developing a family of systems is based upon three architectural views: Operational View OV), Systems View (SV), and Technical Standards View (TV). The top level view of the process establishes the stages for the development of the first Space Elevator and is called Architectural View - 1, Overview and Summary. This paper will show the guidelines and steps of the process while focusing upon components of the Space Elevator Preliminary Architecture View. This Preliminary Architecture View is presented as a draft starting point for the Space Elevator Project.

A Layered Component-Based Architecture of a Virtual Learning Environment

NARCIS (Netherlands)

Avgeriou, Paris; Retalis, Simos; Skordalakis, Manolis; Psaromiligos, Yiannis

2001-01-01

There exists an urgent demand on defining architectures for Virtual Learning Environments (VLEs), so that high-level frameworks for understanding these systems can be discovered, portability, interoperability and reusability can be achieved and adaptability over time can be accomplished. In this

Evolutionary dynamics of protein domain architecture in plants

Directory of Open Access Journals (Sweden)

Zhang Xue-Cheng

2012-01-01

Full Text Available Abstract Background Protein domains are the structural, functional and evolutionary units of the protein. Protein domain architectures are the linear arrangements of domain(s in individual proteins. Although the evolutionary history of protein domain architecture has been extensively studied in microorganisms, the evolutionary dynamics of domain architecture in the plant kingdom remains largely undefined. To address this question, we analyzed the lineage-based protein domain architecture content in 14 completed green plant genomes. Results Our analyses show that all 14 plant genomes maintain similar distributions of species-specific, single-domain, and multi-domain architectures. Approximately 65% of plant domain architectures are universally present in all plant lineages, while the remaining architectures are lineage-specific. Clear examples are seen of both the loss and gain of specific protein architectures in higher plants. There has been a dynamic, lineage-wise expansion of domain architectures during plant evolution. The data suggest that this expansion can be largely explained by changes in nuclear ploidy resulting from rounds of whole genome duplications. Indeed, there has been a decrease in the number of unique domain architectures when the genomes were normalized into a presumed ancestral genome that has not undergone whole genome duplications. Conclusions Our data show the conservation of universal domain architectures in all available plant genomes, indicating the presence of an evolutionarily conserved, core set of protein components. However, the occurrence of lineage-specific domain architectures indicates that domain architecture diversity has been maintained beyond these core components in plant genomes. Although several features of genome-wide domain architecture content are conserved in plants, the data clearly demonstrate lineage-wise, progressive changes and expansions of individual protein domain architectures, reinforcing

Component-Based Approach in Learning Management System Development

Science.gov (United States)

Zaitseva, Larisa; Bule, Jekaterina; Makarov, Sergey

2013-01-01

The paper describes component-based approach (CBA) for learning management system development. Learning object as components of e-learning courses and their metadata is considered. The architecture of learning management system based on CBA being developed in Riga Technical University, namely its architecture, elements and possibilities are…

The architecture of LAMOST observatory control system

International Nuclear Information System (INIS)

Wang Jian; Jin Ge; Yu Xiaoqi; Wan Changsheng; Hao Likai; Li Xihua

2005-01-01

The design of architecture is the one of the most important part in development of Observatory Control System (OCS) for LAMOST. Based on the complexity of LAMOST, long time of development for LAMOST and long life-cycle of OCS system, referring many kinds of architecture pattern, the architecture of OCS is established which is a component-based layered system using many patterns such as the MVC and proxy. (authors)

The artifacts of component-based development

International Nuclear Information System (INIS)

Rizwan, M.; Qureshi, J.; Hayat, S.A.

2007-01-01

Component based development idea was floated in a conference name Mass Produced Software Components in 1968 (1). Since then engineering and scientific libraries are developed to reuse the previously developed functions. This concept is now widely used in SW development as component based development (CBD). Component-based software engineering (CBSE) is used to develop/ assemble software from existing components (2). Software developed using components is called component where (3). This paper presents different architectures of CBD such as Active X, common object request broker architecture (CORBA), remote method invocation (RMI) and simple object access protocol (SOAP). The overall objective of this paper is to support the practice of CBD by comparing its advantages and disadvantages. This paper also evaluates object oriented process model to adapt it for CBD. (author)

Constructional Efficiency in Al_Ahwaar Traditional Architecture

Directory of Open Access Journals (Sweden)

Usama Abdul-Mun'em Khuraibet

2016-03-01

Full Text Available Constructional Efficiency in architecture in general is one of the most important standard success for any structure and a measure of its continuity and relevance across time and space. Given the importance of Al-Ahwaar environment that owned the spatial, environmental, economic and social elements had a prominent impact in creation of architecture patterns form to create special architectural and structural environment, which had many qualities and ingredients that contributed to its continuity and existence over the years. From the premise that man and his environment is the main goal to any architectural style, Thus the research problem focusing on the lack of clarity of the previous literatures in its studies for the role of architectural styles in Al-Ahwaar in achieving constructional efficiency, despite the large number of studies on Al-Ahwaar architecture but it is mostly marked by non-clarity and lack in the constructional and technical aspects, Therefore, the research goal focusing on clarification of the impact of the techniques that used in formations Al_Ahwaar traditional architecture in order to reach to the constructional efficiency in various aspects such as technical, material, economical, and expressional. Assuming that achieving to the constructional efficiency at Al-Ahwaar traditional architecture depends on its characteristics and elements that contributed to the continuity of their patterns across time. The research depended on analytical method of a model of traditional architecture in Al-Ahwaar to reach those goals, as the study of these items aims to deepen the understanding of the designer to the requirements of each component in order to achieve integration together. These components must not conflict with each other, but it must be integrated during and after the design process until it comes out as a creative of architectural destination. al-ahwaar architecture, constructional efficiency, technical and material

Chemical-specific health consultation for chromated copper arsenate chemical mixture: port of Djibouti.

Science.gov (United States)

Chou, Selene; Colman, Joan; Tylenda, Carolyn; De Rosa, Christopher

2007-05-01

The Agency for Toxic Substances and Disease Registry (ATSDR) prepared this health consultation to provide support for assessing the public health implications of hazardous chemical exposure, primarily through drinking water, related to releases of chromated copper arsenate (CCA) in the port of Djibouti. CCA from a shipment, apparently intended for treating electric poles, is leaking into the soil in the port area. CCA is a pesticide used to protect wood against decay-causing organisms. This mixture commonly contains chromium(VI) (hexavalent chromium) as chromic acid, arsenic(V) (pentavalent arsenic) as arsenic pentoxide and copper (II) (divalent copper) as cupric oxide, often in an aqueous solution or concentrate. Experimental studies of the fate of CCA in soil and monitoring studies of wood-preserving sites where CCA was spilled on the soil indicate that the chromium(VI), arsenic and copper components of CCA can leach from soil into groundwater and surface water. In addition, at CCA wood-preserving sites, substantial concentrations of chromium(VI), arsenic and copper remained in the soil and were leachable into water four years after the use of CCA was discontinued, suggesting prolonged persistence in soil, with continued potential for leaching. The degree of leaching depended on soil composition and the extent of soil contamination with CCA. In general, leaching was highest for chromium(VI), intermediate for arsenic and lowest for copper. Thus, the potential for contamination of sources of drinking water exists. Although arsenic that is leached from CCA-contaminated soil into surface water may accumulate in the tissues of fish and shellfish, most of the arsenic in these animals will be in a form (often called fish arsenic) that is less harmful. Copper, which leaches less readily than the other components, can accumulate in tissues of mussels and oysters. Chromium is not likely to accumulate in the tissues of fish and shellfish. Limited studies of air

Melatonin-induced CBF/DREB1s are essential for diurnal change of disease resistance and CCA1 expression in Arabidopsis.

Science.gov (United States)

Shi, Haitao; Wei, Yunxie; He, Chaozu

2016-03-01

Melatonin (N-acetyl-5-methoxytryptamine) is an important regulator of circadian rhythms and immunity in animals. However, the diurnal changes of endogenous melatonin and melatonin-mediated diurnal change of downstream responses remain unclear in Arabidopsis. Using the publicly available microarray data, we found that the transcript levels of two melatonin synthesis genes (serotonin N-acetyltransferase (SNAT) and caffeate O-methyltransferase (COMT)) and endogenous melatonin level were regulated by diurnal cycles, with different magnitudes of change. Moreover, the transcripts of C-repeat-binding factors (CBFs)/Drought response element Binding 1 factors (DREB1s) were co-regulated by exogenous melatonin and diurnal changes, indicating the possible correlation among clock, endogenous melatonin level and AtCBFs expressions. Interestingly, diurnal change of plant immunity against Pst DC3000 and CIRCADIANCLOCK ASSOCIATED 1 (CCA1) expression were largely lost in AtCBFs knockdown line-amiR-1. Taken together, this study identifies the molecular pathway underlying the diurnal changes of immunity in Arabidopsis. Notably, the diurnal changes of endogenous melatonin may regulate corresponding changes of AtCBF/DREB1s expression and their underlying diurnal cycle of plant immunity and AtCCA1. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Method for producing components with internal architectures, such as micro-channel reactors, via diffusion bonding sheets

Science.gov (United States)

Alman, David E [Corvallis, OR; Wilson, Rick D [Corvallis, OR; Davis, Daniel L [Albany, OR

2011-03-08

This invention relates to a method for producing components with internal architectures, and more particularly, this invention relates to a method for producing structures with microchannels via the use of diffusion bonding of stacked laminates. Specifically, the method involves weakly bonding a stack of laminates forming internal voids and channels with a first generally low uniaxial pressure and first temperature such that bonding at least between the asperites of opposing laminates occurs and pores are isolated in interfacial contact areas, followed by a second generally higher isostatic pressure and second temperature for final bonding. The method thereby allows fabrication of micro-channel devices such as heat exchangers, recuperators, heat-pumps, chemical separators, chemical reactors, fuel processing units, and combustors without limitation on the fin aspect ratio.

A High Performance COTS Based Computer Architecture

Science.gov (United States)

Patte, Mathieu; Grimoldi, Raoul; Trautner, Roland

2014-08-01

Using Commercial Off The Shelf (COTS) electronic components for space applications is a long standing idea. Indeed the difference in processing performance and energy efficiency between radiation hardened components and COTS components is so important that COTS components are very attractive for use in mass and power constrained systems. However using COTS components in space is not straightforward as one must account with the effects of the space environment on the COTS components behavior. In the frame of the ESA funded activity called High Performance COTS Based Computer, Airbus Defense and Space and its subcontractor OHB CGS have developed and prototyped a versatile COTS based architecture for high performance processing. The rest of the paper is organized as follows: in a first section we will start by recapitulating the interests and constraints of using COTS components for space applications; then we will briefly describe existing fault mitigation architectures and present our solution for fault mitigation based on a component called the SmartIO; in the last part of the paper we will describe the prototyping activities executed during the HiP CBC project.

An Internet of Things Generic Reference Architecture

DEFF Research Database (Denmark)

Bhalerao, Dipashree M.; Riaz, Tahir; Madsen, Ole Brun

2013-01-01

Internet of things Network is a future application of Internet. This network has three major basic blocks as business process or Application, core network or internetwork and peripheral network as Things or objects. The assembly has the basic intention of connecting all physical and virtual things......, and keeping track of all these things for monitoring and controlling some information. IoT architecture is studied from software architecture, overall system architecture and network architecture point of view. Paper puts forward the requirements of software architecture along with, its component...... and deployment diagram, process and interface diagram at abstract level. Paper proposes the abstract generic IoT reference and concrete abstract generic IoT reference architectures. Network architecture is also put up as a state of the art. Paper shortly gives overviews of protocols used for IoT. Some...

Advanced connection systems for architectural glazing

CERN Document Server

Afghani Khoraskani, Roham

2015-01-01

This book presents the findings of a detailed study to explore the behavior of architectural glazing systems during and after an earthquake and to develop design proposals that will mitigate or even eliminate the damage inflicted on these systems. The seismic behavior of common types of architectural glazing systems are investigated and causes of damage to each system, identified. Furthermore, depending on the geometrical and structural characteristics, the ultimate horizontal load capacity of glass curtain wall systems is defined based on the stability of the glass components. Detailed attention is devoted to the incorporation of advanced connection devices between the structure of the building and the building envelope system in order to minimize the damage to glazed components. An innovative new connection device is introduced that results in a delicate and functional system easily incorporated into different architectural glazing systems, including those demanding maximum transparency.

Web Service Architecture for e-Learning

Directory of Open Access Journals (Sweden)

Xiaohong Qiu

2005-10-01

Full Text Available Message-based Web Service architecture provides a unified approach to applications and Web Services that incorporates the flexibility of messaging and distributed components. We propose SMMV and MMMV collaboration as the general architecture of collaboration based on a Web service model, which accommodates both instructor-led learning and participatory learning. This approach derives from our message-based Model-View-Controller (M-MVC architecture of Web applications, comprises an event-driven Publish/Subscribe scheme, and provides effective collaboration with high interactivity of rich Web content for diverse clients over heterogeneous network environments.

Self-Contained Cross-Cutting Pipeline Software Architecture

OpenAIRE

Patwardhan, Amol; Patwardhan, Rahul; Vartak, Sumalini

2016-01-01

Layered software architecture contains several intra-layer and inter-layer dependencies. Each layer depends on shared components making it difficult to release a code change, bug fix or feature without exhaustive testing and having to build the entire software code base. This paper proposed self-contained, cross-cutting pipeline architecture (SCPA) that is independent of existing layers. We chose 2 open source projects and 3 internal intern projects that used n-tier architecture and applied t...

Terra Harvest software architecture

Science.gov (United States)

Humeniuk, Dave; Klawon, Kevin

2012-06-01

Under the Terra Harvest Program, the DIA has the objective of developing a universal Controller for the Unattended Ground Sensor (UGS) community. The mission is to define, implement, and thoroughly document an open architecture that universally supports UGS missions, integrating disparate systems, peripherals, etc. The Controller's inherent interoperability with numerous systems enables the integration of both legacy and future UGS System (UGSS) components, while the design's open architecture supports rapid third-party development to ensure operational readiness. The successful accomplishment of these objectives by the program's Phase 3b contractors is demonstrated via integration of the companies' respective plug-'n'-play contributions that include controllers, various peripherals, such as sensors, cameras, etc., and their associated software drivers. In order to independently validate the Terra Harvest architecture, L-3 Nova Engineering, along with its partner, the University of Dayton Research Institute, is developing the Terra Harvest Open Source Environment (THOSE), a Java Virtual Machine (JVM) running on an embedded Linux Operating System. The Use Cases on which the software is developed support the full range of UGS operational scenarios such as remote sensor triggering, image capture, and data exfiltration. The Team is additionally developing an ARM microprocessor-based evaluation platform that is both energy-efficient and operationally flexible. The paper describes the overall THOSE architecture, as well as the design decisions for some of the key software components. Development process for THOSE is discussed as well.

Artificial intelligent e-learning architecture

Science.gov (United States)

Alharbi, Mafawez; Jemmali, Mahdi

2017-03-01

Many institutions and university has forced to use e learning, due to its ability to provide additional and flexible solutions for students and researchers. E-learning In the last decade have transported about the extreme changes in the distribution of education allowing learners to access multimedia course material at any time, from anywhere to suit their specific needs. In the form of e learning, instructors and learners live in different places and they do not engage in a classroom environment, but within virtual universe. Many researches have defined e learning based on their objectives. Therefore, there are small number of e-learning architecture have proposed in the literature. However, the proposed architecture has lack of embedding intelligent system in the architecture of e learning. This research argues that unexplored potential remains, as there is scope for e learning to be intelligent system. This research proposes e-learning architecture that incorporates intelligent system. There are intelligence components, which built into the architecture.

Functional Interface Considerations within an Exploration Life Support System Architecture

Science.gov (United States)

Perry, Jay L.; Sargusingh, Miriam J.; Toomarian, Nikzad

2016-01-01

As notional life support system (LSS) architectures are developed and evaluated, myriad options must be considered pertaining to process technologies, components, and equipment assemblies. Each option must be evaluated relative to its impact on key functional interfaces within the LSS architecture. A leading notional architecture has been developed to guide the path toward realizing future crewed space exploration goals. This architecture includes atmosphere revitalization, water recovery and management, and environmental monitoring subsystems. Guiding requirements for developing this architecture are summarized and important interfaces within the architecture are discussed. The role of environmental monitoring within the architecture is described.

Decoding the auditory brain with canonical component analysis.

Science.gov (United States)

de Cheveigné, Alain; Wong, Daniel D E; Di Liberto, Giovanni M; Hjortkjær, Jens; Slaney, Malcolm; Lalor, Edmund

2018-05-15

The relation between a stimulus and the evoked brain response can shed light on perceptual processes within the brain. Signals derived from this relation can also be harnessed to control external devices for Brain Computer Interface (BCI) applications. While the classic event-related potential (ERP) is appropriate for isolated stimuli, more sophisticated "decoding" strategies are needed to address continuous stimuli such as speech, music or environmental sounds. Here we describe an approach based on Canonical Correlation Analysis (CCA) that finds the optimal transform to apply to both the stimulus and the response to reveal correlations between the two. Compared to prior methods based on forward or backward models for stimulus-response mapping, CCA finds significantly higher correlation scores, thus providing increased sensitivity to relatively small effects, and supports classifier schemes that yield higher classification scores. CCA strips the brain response of variance unrelated to the stimulus, and the stimulus representation of variance that does not affect the response, and thus improves observations of the relation between stimulus and response. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

Assortative Mating for Psychopathy Components and its Effects on the Relationship Quality in Intimate Partners

Directory of Open Access Journals (Sweden)

Igor Kardum

2017-05-01

Full Text Available In three studies, we examined assortative mating for psychopathy components as well as its effects on the relationship quality in intimate partners. Compared to the original structure we confirmed three factors of psychopathy: criminal tendencies (CT, erratic lifestyle (ELS and interpersonal manipulation (IM, while callous affect (CA was not replicated. Hypotheses regarding positive versus negative assortment, initial assortment versus convergence, and active assortment versus social homogamy were tested. All hypotheses were examined using both variable-centered approach (VCA and couple-centered approach (CCA. We found moderate positive assortment between intimate partners in psychopathy as a latent construct estimated by structural modelling. Furthermore, positive assortment for all three components of psychopathy was found either by using only VCA (CT, only CCA (IM or both approaches (ELS. Additionally, initial assortment rather than convergence hypothesis and active assortment rather than social homogamy hypothesis was confirmed for all three psychopathy components, with a slight tendency towards divergence and social homogamy. We explored the effects of similarity in psychopathy components on the women and men' relationship quality by using profile similarity and polynomial regression analyses. Profile similarity in IM was significantly positively related to women's relationship quality, while the results of the polynomial regression analyses were more complex, and showed that only (dissimilarity in CT did not exert any effect on women and men's relationship quality. Greater disagreement between women and men's ELS was related with more sharp decrease of women's relationship quality, while men's relationship quality decreased at the higher levels of women and men's ELS. Greater disagreement between women and men's IM results in a lower women's relationship quality, while women and men's relationship quality was higher when women's IM was

2005 dossier: granite. Tome: architecture and management of the geologic disposal; Dossier 2005: granite. Tome architecture et gestion du stockage geologique

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This document makes a status of the researches carried out by the French national agency of radioactive wastes (ANDRA) about the geologic disposal of high-level and long-lived radioactive wastes in granite formations. Content: 1 - Approach of the study: main steps since the December 30, 1991 law, ANDRA's research program on disposal in granitic formations; 2 - high-level and long-lived (HLLL) wastes: production scenarios, waste categories, inventory model; 3 - disposal facility design in granitic environment: definition of the geologic disposal functions, the granitic material, general facility design options; 4 - general architecture of a disposal facility in granitic environment: surface facilities, underground facilities, disposal process, operational safety; 5 - B-type wastes disposal area: primary containers of B-type wastes, safety options, concrete containers, disposal alveoles, architecture of the B-type wastes disposal area, disposal process and feasibility aspects, functions of disposal components with time; 6 - C-type wastes disposal area: C-type wastes primary containers, safety options, super-containers, disposal alveoles, architecture of the C-type wastes disposal area, disposal process in a reversibility logics, functions of disposal components with time; 7 - spent fuels disposal area: spent fuel assemblies, safety options, spent fuel containers, disposal alveoles, architecture of the spent fuel disposal area, disposal process in a reversibility logics, functions of disposal components with time; 8 - conclusions: suitability of the architecture with various types of French granites, strong design, reversibility taken into consideration. (J.S.)

The PSIM environment architecture

NARCIS (Netherlands)

Goossenaerts, J.B.M.; Reyneri, C.; van den Berg, R.J.; Eijnatten, van F.M.

2002-01-01

Abstract. This chapter describes the architecture of the PSIM environment. It briefly presents the PSIM objectives and the role the PSIM environment plays in meeting these objectives. It then states the role and place of each of technological components of the environment: the ontology, the

Overall Architecture of the Intraflagellar Transport (IFT)-B Complex Containing Cluap1/IFT38 as an Essential Component of the IFT-B Peripheral Subcomplex*

Science.gov (United States)

Katoh, Yohei; Terada, Masaya; Nishijima, Yuya; Takei, Ryota; Nozaki, Shohei; Hamada, Hiroshi; Nakayama, Kazuhisa

2016-01-01

Intraflagellar transport (IFT) is essential for assembly and maintenance of cilia and flagella as well as ciliary motility and signaling. IFT is mediated by multisubunit complexes, including IFT-A, IFT-B, and the BBSome, in concert with kinesin and dynein motors. Under high salt conditions, purified IFT-B complex dissociates into a core subcomplex composed of at least nine subunits and at least five peripherally associated proteins. Using the visible immunoprecipitation assay, which we recently developed as a convenient protein-protein interaction assay, we determined the overall architecture of the IFT-B complex, which can be divided into core and peripheral subcomplexes composed of 10 and 6 subunits, respectively. In particular, we identified TTC26/IFT56 and Cluap1/IFT38, neither of which was included with certainty in previous models of the IFT-B complex, as integral components of the core and peripheral subcomplexes, respectively. Consistent with this, a ciliogenesis defect of Cluap1-deficient mouse embryonic fibroblasts was rescued by exogenous expression of wild-type Cluap1 but not by mutant Cluap1 lacking the binding ability to other IFT-B components. The detailed interaction map as well as comparison of subcellular localization of IFT-B components between wild-type and Cluap1-deficient cells provides insights into the functional relevance of the architecture of the IFT-B complex. PMID:26980730

Lunar architecture and urbanism

Science.gov (United States)

Sherwood, Brent

1992-01-01

Human civilization and architecture have defined each other for over 5000 years on Earth. Even in the novel environment of space, persistent issues of human urbanism will eclipse, within a historically short time, the technical challenges of space settlement that dominate our current view. By adding modern topics in space engineering, planetology, life support, human factors, material invention, and conservation to their already renaissance array of expertise, urban designers can responsibly apply ancient, proven standards to the exciting new opportunities afforded by space. Inescapable facts about the Moon set real boundaries within which tenable lunar urbanism and its component architecture must eventually develop.

Component-Based Software Engineering and Runtime Type Definition

OpenAIRE

A. R. Shakurov

2011-01-01

The component-based approach to software engineering, its current implementations and their limitations are discussed. A new extended architecture for such systems is presented. Its main architectural concepts and principles are considered.

Move-tecture: A Conceptual Framework for Designing Movement in Architecture

Science.gov (United States)

Yilmaz, Irem

2017-10-01

Along with the technological improvements in our age, it is now possible for the movement to become one of the basic components of the architectural space. Accordingly, architectural construction of movement changes both our architectural production practices and our understanding of architectural space. However, existing design concepts and approaches are insufficient to discuss and understand this change. In this respect, this study aims to form a conceptual framework on the relationship of architecture and movement. In this sense, the conceptualization of move-tecture is developed to research on the architectural construction of movement and the potentials of spatial creation through architecturally constructed movement. Move-tecture, is a conceptualization that treats movement as a basic component of spatial creation. It presents the framework of a qualitative categorization on the design of moving architectural structures. However, this categorization is a flexible one that can evolve in the direction of the expanding possibilities of the architectural design and the changing living conditions. With this understanding, six categories have been defined within the context of the article: Topological Organization, Choreographic Formation, Kinetic Structuring, Corporeal Constitution, Technological Configuration and Interactional Patterning. In line with these categories, a multifaceted perspective on the moving architectural structures is promoted. It is aimed that such an understanding constitutes a new initiative in the design practices carried out in this area and provides a conceptual basis for the discussions to be developed.

Developing Dynamic Field Theory Architectures for Embodied Cognitive Systems with cedar.

Science.gov (United States)

Lomp, Oliver; Richter, Mathis; Zibner, Stephan K U; Schöner, Gregor

2016-01-01

Embodied artificial cognitive systems, such as autonomous robots or intelligent observers, connect cognitive processes to sensory and effector systems in real time. Prime candidates for such embodied intelligence are neurally inspired architectures. While components such as forward neural networks are well established, designing pervasively autonomous neural architectures remains a challenge. This includes the problem of tuning the parameters of such architectures so that they deliver specified functionality under variable environmental conditions and retain these functions as the architectures are expanded. The scaling and autonomy problems are solved, in part, by dynamic field theory (DFT), a theoretical framework for the neural grounding of sensorimotor and cognitive processes. In this paper, we address how to efficiently build DFT architectures that control embodied agents and how to tune their parameters so that the desired cognitive functions emerge while such agents are situated in real environments. In DFT architectures, dynamic neural fields or nodes are assigned dynamic regimes, that is, attractor states and their instabilities, from which cognitive function emerges. Tuning thus amounts to determining values of the dynamic parameters for which the components of a DFT architecture are in the specified dynamic regime under the appropriate environmental conditions. The process of tuning is facilitated by the software framework cedar , which provides a graphical interface to build and execute DFT architectures. It enables to change dynamic parameters online and visualize the activation states of any component while the agent is receiving sensory inputs in real time. Using a simple example, we take the reader through the workflow of conceiving of DFT architectures, implementing them on embodied agents, tuning their parameters, and assessing performance while the system is coupled to real sensory inputs.

Raexplore: Enabling Rapid, Automated Architecture Exploration for Full Applications

Energy Technology Data Exchange (ETDEWEB)

Zhang, Yao [Argonne National Lab. (ANL), Argonne, IL (United States); Balaprakash, Prasanna [Argonne National Lab. (ANL), Argonne, IL (United States); Meng, Jiayuan [Argonne National Lab. (ANL), Argonne, IL (United States); Morozov, Vitali [Argonne National Lab. (ANL), Argonne, IL (United States); Parker, Scott [Argonne National Lab. (ANL), Argonne, IL (United States); Kumaran, Kalyan [Argonne National Lab. (ANL), Argonne, IL (United States)

2014-12-01

We present Raexplore, a performance modeling framework for architecture exploration. Raexplore enables rapid, automated, and systematic search of architecture design space by combining hardware counter-based performance characterization and analytical performance modeling. We demonstrate Raexplore for two recent manycore processors IBM Blue- Gene/Q compute chip and Intel Xeon Phi, targeting a set of scientific applications. Our framework is able to capture complex interactions between architectural components including instruction pipeline, cache, and memory, and to achieve a 3–22% error for same-architecture and cross-architecture performance predictions. Furthermore, we apply our framework to assess the two processors, and discover and evaluate a list of architectural scaling options for future processor designs.

Frontier: High Performance Database Access Using Standard Web Components in a Scalable Multi-Tier Architecture

International Nuclear Information System (INIS)

Kosyakov, S.; Kowalkowski, J.; Litvintsev, D.; Lueking, L.; Paterno, M.; White, S.P.; Autio, Lauri; Blumenfeld, B.; Maksimovic, P.; Mathis, M.

2004-01-01

A high performance system has been assembled using standard web components to deliver database information to a large number of broadly distributed clients. The CDF Experiment at Fermilab is establishing processing centers around the world imposing a high demand on their database repository. For delivering read-only data, such as calibrations, trigger information, and run conditions data, we have abstracted the interface that clients use to retrieve data objects. A middle tier is deployed that translates client requests into database specific queries and returns the data to the client as XML datagrams. The database connection management, request translation, and data encoding are accomplished in servlets running under Tomcat. Squid Proxy caching layers are deployed near the Tomcat servers, as well as close to the clients, to significantly reduce the load on the database and provide a scalable deployment model. Details the system's construction and use are presented, including its architecture, design, interfaces, administration, performance measurements, and deployment plan

A Proposed Information Architecture for Telehealth System Interoperability

Energy Technology Data Exchange (ETDEWEB)

Craft, R.L.; Funkhouser, D.R.; Gallagher, L.K.; Garica, R.J.; Parks, R.C.; Warren, S.

1999-04-20

We propose an object-oriented information architecture for telemedicine systems that promotes secure `plug-and-play' interaction between system components through standardized interfaces, communication protocols, messaging formats, and data definitions. In this architecture, each component functions as a black box, and components plug together in a ''lego-like'' fashion to achieve the desired device or system functionality. Introduction Telemedicine systems today rely increasingly on distributed, collaborative information technology during the care delivery process. While these leading-edge systems are bellwethers for highly advanced telemedicine, most are custom-designed and do not interoperate with other commercial offerings. Users are limited to a set of functionality that a single vendor provides and must often pay high prices to obtain this functionality, since vendors in this marketplace must deliver en- tire systems in order to compete. Besides increasing corporate research and development costs, this inhibits the ability of the user to make intelligent purchasing decisions regarding best-of-breed technologies. This paper proposes a reference architecture for plug-and-play telemedicine systems that addresses these issues.

Using business critical design rules to frame new architecture introduction in multi-architecture portfolios

DEFF Research Database (Denmark)

Løkkegaard, Martin; Mortensen, Niels Henrik; Hvam, Lars

2018-01-01

component sharing, or sharing critical design principles. This alignment is not trivial, as extensive design knowledge is needed to overview a portfolio with many, often highly different products and manufacturing lines. In this paper, we suggest establishing a frame of reference for new......When introducing new architectures to an industrial portfolio, counting multiple existing product and manufacturing solutions, time-to-market and investments in manufacturing equipment can be significantly reduced if new concepts are aligned with the existing portfolio. This can be done through......-product introduction based on several ‘game rules’, or Business Critical Design Rules (BCDRs), which denote the most critical features of the product and manufacturing architectures, and should be considered an obligatory reference for design when introducing new architectures. BCDRs are derived from the portfolio...

The dynamic relationship between plant architecture and competition.

Science.gov (United States)

Ford, E David

2014-01-01

In this review, structural and functional changes are described in single-species, even-aged, stands undergoing competition for light. Theories of the competition process as interactions between whole plants have been advanced but have not been successful in explaining these changes and how they vary between species or growing conditions. This task now falls to researchers in plant architecture. Research in plant architecture has defined three important functions of individual plants that determine the process of canopy development and competition: (i) resource acquisition plasticity; (ii) morphogenetic plasticity; (iii) architectural variation in efficiency of interception and utilization of light. In this review, this research is synthesized into a theory for competition based on five groups of postulates about the functioning of plants in stands. Group 1: competition for light takes place at the level of component foliage and branches. Group 2: the outcome of competition is determined by the dynamic interaction between processes that exert dominance and processes that react to suppression. Group 3: species differences may affect both exertion of dominance and reaction to suppression. Group 4: individual plants may simultaneously exhibit, in different component parts, resource acquisition and morphogenetic plasticity. Group 5: mortality is a time-delayed response to suppression. Development of architectural models when combined with field investigations is identifying research needed to develop a theory of architectural influences on the competition process. These include analyses of the integration of foliage and branch components into whole-plant growth and precise definitions of environmental control of morphogenetic plasticity and its interaction with acquisition of carbon for plant growth.

Temperature development and sterilization of red pine poles during CCA treatment, elevated temperature fixation and drying

Energy Technology Data Exchange (ETDEWEB)

Cooper, P.; Albright, M.; Srinivasan, U.; Ung, A. [New Brunswick Univ., Fredericton, NB (Canada). Wood Science and Technology Centre

2002-07-01

The application of chromated copper arsenate (CCA) treatment and fixation and drying under the conditions of the study to large red pine poles left for an air seasoning period of 10 months in Quebec, Canada progressively reduced the number of micro-organisms present. A large number of microfungi isolations were effected before the treatment from the sapwood and heartwood of all poles and wood decay fungi on 8 selected poles from the 20 test poles. They originated from the sapwood zone. A reduction of approximately 50 per cent in the number of microfungi isolated from the sapwood was noted after the CCA treatment. In the case of 9 of 30 poles, basidiomycetes were isolated after treatment primarily from the untreated heartwood. There were a few instances where basidiomycetes were isolated from unpenetrated sapwood (wet pockets). Temperatures of 55 to 60 degrees Celsius were achieved under moderate temperature fixation schedules (20 hours) for approximately 5 hours at full sapwood depth. Only by the end of the schedule was a temperature of 55 degrees celsius achieved at the centre of the poles. Most of the microfungi were eliminated by this temperature regime. Trichoderma was eliminated, and only one isolation of basidiomycetes was left from the heartwood of one pole. Temperatures of 55 to 60 degrees Celsius were achieved in the wood core for 9 to 10 days during kiln drying. No basidiomycete isolations remained after this exposure. In several of the poles, there was evidence of Paecilomyces variotii, a thermo-tolerant species and a number of species of Penicillium moulds. It was concluded that there was a negligible probability of decay fungi surviving the sequence of processes as described, given the effectiveness of the fixation exposure and the higher wood temperatures sustained for longer periods. 16 refs., 5 tabs., 2 figs.

Advanced customization in architectural design and construction

CERN Document Server

Naboni, Roberto

2015-01-01

This book presents the state of the art in advanced customization within the sector of architectural design and construction, explaining important new technologies that are boosting design, product and process innovation and identifying the challenges to be confronted as we move toward a mass customization construction industry. Advanced machinery and software integration are discussed, as well as an overview of the manufacturing techniques offered through digital methods that are acquiring particular significance within the field of digital architecture. CNC machining, Robotic Fabrication, and Additive Manufacturing processes are all clearly explained, highlighting their ability to produce personalized architectural forms and unique construction components. Cutting-edge case studies in digitally fabricated architectural realizations are described and, looking towards the future, a new model of 100% customized architecture for design and construction is presented. The book is an excellent guide to the profoun...

Conservation of local architecture from primary education

Directory of Open Access Journals (Sweden)

Paula Esther Azcuy Chiroles

2005-12-01

Full Text Available The knowledge of the local architecture in the primary school is insufficient, according to results of the diagnosis carried out for the investigation of the Project of Local Art of the Artistic Education Department of ISP “Rafael M. Mendive.” The lack of systematic work was demonstrated in the promotion of local architecture starting from the subject of Plastic arts, in its curricular and extracurricular components. This is the reason for presenting an Strategy for the promotion of the local architecture in primary teaching, with a System of Activities for the promotion of the local civil architecture that allows the motivation of the students, professors, family and Institutions toward the acquisition of knowledge on the local artistic culture, and the appreciation of the most illustrative architectural patrimonial values in Pinar del Río city.

Calcification rates of crustose coralline algae (CCA) derived from Calcification Accretion Units (CAUs) deployed at coral reef sites in Batangas, Philippines in 2012 and recovered in 2015 (NCEI Accession 0162831)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Laboratory experiments reveal calcification rates of crustose coralline algae (CCA) are strongly correlated to seawater aragonite saturation state. Predictions of...

Radiology systems architecture.

Science.gov (United States)

Deibel, S R; Greenes, R A

1996-05-01

This article focuses on the software requirements for enterprise integration in radiology. The needs of a future radiology systems architecture are examined, both at a concrete functional level and at an abstract system-properties level. A component-based approach to software development is described and is validated in the context of each of the abstract system requirements for future radiology computing environments.

Developing dynamic field theory architectures for embodied cognitive systems with cedar

Directory of Open Access Journals (Sweden)

Oliver Lomp

2016-11-01

Full Text Available Embodied artificial cognitive systems such as autonomous robots or intelligent observers connect cognitive processes to sensory and effector systems in real time. Prime candidates for such embodied intelligence are neurally inspired architectures. While components such as forward neural networks are well established, designing pervasively autonomous neural architectures remains a challenge. This includes the problem of tuning the parameters of such architectures so that they deliver specified functionality under variable environmental conditions and retain these functions as the architectures are expanded. The scaling and autonomy problems are solved, in part, by dynamic field theory (DFT, a theoretical framework for the neural grounding of sensorimotor and cognitive processes. In this paper, we address how to efficiently build DFT architectures that control embodied agents and how to tune their parameters so that the desired cognitive functions emerge while such agents are situated in real environments. In DFT architectures, dynamic neural fields or nodes are assigned dynamic regimes, that is, attractor states and their instabilities, from which cognitive function emerges. Tuning thus amounts to determining values of the dynamic parameters for which the components of a DFT architecture are in the specified dynamic regime under the appropriate environmental conditions. The process of tuning is facilitated by the software framework cedar, which provides a graphical interface to build and execute DFT architectures. It enables to change dynamic parameters online and visualize the activation states of any component while the agent is receiving sensory inputs in real-time. Using a simple example, we take the reader through the workflow of conceiving of DFT architectures, implementing them on embodied agents, tuning their parameters, and assessing performance while the system is coupled to real sensory inputs.

Design of low-power coarse-grained reconfigurable architectures

CERN Document Server

Kim, Yoonjin

2010-01-01

Coarse-grained reconfigurable architecture (CGRA) has emerged as a solution for flexible, application-specific optimization of embedded systems. Helping you understand the issues involved in designing and constructing embedded systems, Design of Low-Power Coarse-Grained Reconfigurable Architectures offers new frameworks for optimizing the architecture of components in embedded systems in order to decrease area and save power. Real application benchmarks and gate-level simulations substantiate these frameworks.The first half of the book explains how to reduce power in the configuration cache. T

Software representation methodology for agile application development: An architectural approach

Directory of Open Access Journals (Sweden)

Alejandro Paolo Daza Corredor

2016-06-01

Full Text Available The generation of Web applications represents the execution of repetitive tasks, this process involves determining information structures, the generation of different types of components and finally deployment tasks and tuning applications. In many applications of this type are coincident components generated from application to application. Current trends in software engineering as MDE, MDA or MDD pretend to automate the generation of applications based on structuring a model to apply transformations to the achievement of the application. This document intends to translate an architectural foundation that facilitates the generation of these applications relying on model-driven architecture but without ignoring the existence and relevance of existing trends mentioned in this summary architectural models.

From green architecture to architectural green

DEFF Research Database (Denmark)

Earon, Ofri

2011-01-01

that describes the architectural exclusivity of this particular architecture genre. The adjective green expresses architectural qualities differentiating green architecture from none-green architecture. Currently, adding trees and vegetation to the building’s facade is the main architectural characteristics...... they have overshadowed the architectural potential of green architecture. The paper questions how a green space should perform, look like and function. Two examples are chosen to demonstrate thorough integrations between green and space. The examples are public buildings categorized as pavilions. One......The paper investigates the topic of green architecture from an architectural point of view and not an energy point of view. The purpose of the paper is to establish a debate about the architectural language and spatial characteristics of green architecture. In this light, green becomes an adjective...

Overall Architecture of the Intraflagellar Transport (IFT)-B Complex Containing Cluap1/IFT38 as an Essential Component of the IFT-B Peripheral Subcomplex.

Science.gov (United States)

Katoh, Yohei; Terada, Masaya; Nishijima, Yuya; Takei, Ryota; Nozaki, Shohei; Hamada, Hiroshi; Nakayama, Kazuhisa

2016-05-20

Intraflagellar transport (IFT) is essential for assembly and maintenance of cilia and flagella as well as ciliary motility and signaling. IFT is mediated by multisubunit complexes, including IFT-A, IFT-B, and the BBSome, in concert with kinesin and dynein motors. Under high salt conditions, purified IFT-B complex dissociates into a core subcomplex composed of at least nine subunits and at least five peripherally associated proteins. Using the visible immunoprecipitation assay, which we recently developed as a convenient protein-protein interaction assay, we determined the overall architecture of the IFT-B complex, which can be divided into core and peripheral subcomplexes composed of 10 and 6 subunits, respectively. In particular, we identified TTC26/IFT56 and Cluap1/IFT38, neither of which was included with certainty in previous models of the IFT-B complex, as integral components of the core and peripheral subcomplexes, respectively. Consistent with this, a ciliogenesis defect of Cluap1-deficient mouse embryonic fibroblasts was rescued by exogenous expression of wild-type Cluap1 but not by mutant Cluap1 lacking the binding ability to other IFT-B components. The detailed interaction map as well as comparison of subcellular localization of IFT-B components between wild-type and Cluap1-deficient cells provides insights into the functional relevance of the architecture of the IFT-B complex. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.

SecureCore Software Architecture: Trusted Path Application (TPA) Requirements

National Research Council Canada - National Science Library

Clark, Paul C; Irvine, Cynthia E; Levin, Timothy E; Nguyen, Thuy D; Vidas, Timothy M

2007-01-01

.... A high-level architecture is described to provide such features. In addition, a usage scenario is described for a potential use of the architecture, with emphasis on the trusted path, a non-spoofable user interface to the trusted components of the system. Detailed requirements for the trusted path are provided.

Integrated Optical Interconnect Architectures for Embedded Systems

CERN Document Server

Nicolescu, Gabriela

2013-01-01

This book provides a broad overview of current research in optical interconnect technologies and architectures. Introductory chapters on high-performance computing and the associated issues in conventional interconnect architectures, and on the fundamental building blocks for integrated optical interconnect, provide the foundations for the bulk of the book which brings together leading experts in the field of optical interconnect architectures for data communication. Particular emphasis is given to the ways in which the photonic components are assembled into architectures to address the needs of data-intensive on-chip communication, and to the performance evaluation of such architectures for specific applications.   Provides state-of-the-art research on the use of optical interconnects in Embedded Systems; Begins with coverage of the basics for high-performance computing and optical interconnect; Includes a variety of on-chip optical communication topologies; Features coverage of system integration and opti...

Architecture on Architecture

DEFF Research Database (Denmark)

Olesen, Karen

2016-01-01

that is not scientific or academic but is more like a latent body of data that we find embedded in existing works of architecture. This information, it is argued, is not limited by the historical context of the work. It can be thought of as a virtual capacity – a reservoir of spatial configurations that can...... correlation between the study of existing architectures and the training of competences to design for present-day realities.......This paper will discuss the challenges faced by architectural education today. It takes as its starting point the double commitment of any school of architecture: on the one hand the task of preserving the particular knowledge that belongs to the discipline of architecture, and on the other hand...

The Linux kernel as flexible product-line architecture

NARCIS (Netherlands)

M. de Jonge (Merijn)

2002-01-01

textabstractThe Linux kernel source tree is huge ($>$ 125 MB) and inflexible (because it is difficult to add new kernel components). We propose to make this architecture more flexible by assembling kernel source trees dynamically from individual kernel components. Users then, can select what

Hybrid architecture for building secure sensor networks

Science.gov (United States)

Owens, Ken R., Jr.; Watkins, Steve E.

2012-04-01

Sensor networks have various communication and security architectural concerns. Three approaches are defined to address these concerns for sensor networks. The first area is the utilization of new computing architectures that leverage embedded virtualization software on the sensor. Deploying a small, embedded virtualization operating system on the sensor nodes that is designed to communicate to low-cost cloud computing infrastructure in the network is the foundation to delivering low-cost, secure sensor networks. The second area focuses on securing the sensor. Sensor security components include developing an identification scheme, and leveraging authentication algorithms and protocols that address security assurance within the physical, communication network, and application layers. This function will primarily be accomplished through encrypting the communication channel and integrating sensor network firewall and intrusion detection/prevention components to the sensor network architecture. Hence, sensor networks will be able to maintain high levels of security. The third area addresses the real-time and high priority nature of the data that sensor networks collect. This function requires that a quality-of-service (QoS) definition and algorithm be developed for delivering the right data at the right time. A hybrid architecture is proposed that combines software and hardware features to handle network traffic with diverse QoS requirements.

A new method for performance evaluation of enterprise architecture using streotypes

Directory of Open Access Journals (Sweden)

Samaneh Khamseh

2013-11-01

Full Text Available These days, we see many organizations with extremely complex systems with various processes, organizational units, individuals, and information technology support where there are complex relationships among their various elements. In these organizations, poor architecture reduces efficiency and flexibility. Enterprise architecture, with full description of the functions of information technology in the organization, attempts to reduce the complexity of the most efficient tools to reach organizational objectives. Enterprise architecture can better assess the optimal conditions for achieving organizational goals. For evaluating enterprise architecture, executable model need to be applied. Executable model using a static architectural view to describe necessary documents need to be created. Therefore, to make an executable model, we need a requirement to produce products of the enterprise architecture to create an executable model. In this paper, for the production of an enterprise architecture, object-oriented approach is implemented. We present an algorithm to use stereotypes by considering reliability assessment. The approach taken in this algorithm is to improve the reliability by considering additional components in parallel and using redundancy techniques to maintain the minimum number of components. Furthermore, we implement the proposed algorithm on a case study and the results are compared with previous algorithms.

Baseline Architecture of ITER Control System

Science.gov (United States)

Wallander, A.; Di Maio, F.; Journeaux, J.-Y.; Klotz, W.-D.; Makijarvi, P.; Yonekawa, I.

2011-08-01

The control system of ITER consists of thousands of computers processing hundreds of thousands of signals. The control system, being the primary tool for operating the machine, shall integrate, control and coordinate all these computers and signals and allow a limited number of staff to operate the machine from a central location with minimum human intervention. The primary functions of the ITER control system are plant control, supervision and coordination, both during experimental pulses and 24/7 continuous operation. The former can be split in three phases; preparation of the experiment by defining all parameters; executing the experiment including distributed feed-back control and finally collecting, archiving, analyzing and presenting all data produced by the experiment. We define the control system as a set of hardware and software components with well defined characteristics. The architecture addresses the organization of these components and their relationship to each other. We distinguish between physical and functional architecture, where the former defines the physical connections and the latter the data flow between components. In this paper, we identify the ITER control system based on the plant breakdown structure. Then, the control system is partitioned into a workable set of bounded subsystems. This partition considers at the same time the completeness and the integration of the subsystems. The components making up subsystems are identified and defined, a naming convention is introduced and the physical networks defined. Special attention is given to timing and real-time communication for distributed control. Finally we discuss baseline technologies for implementing the proposed architecture based on analysis, market surveys, prototyping and benchmarking carried out during the last year.

Molecular basis of angiosperm tree architecture.

Science.gov (United States)

Hollender, Courtney A; Dardick, Chris

2015-04-01

The architecture of trees greatly impacts the productivity of orchards and forestry plantations. Amassing greater knowledge on the molecular genetics that underlie tree form can benefit these industries, as well as contribute to basic knowledge of plant developmental biology. This review describes the fundamental components of branch architecture, a prominent aspect of tree structure, as well as genetic and hormonal influences inferred from studies in model plant systems and from trees with non-standard architectures. The bulk of the molecular and genetic data described here is from studies of fruit trees and poplar, as these species have been the primary subjects of investigation in this field of science. No claim to original US Government works. New Phytologist © 2014 New Phytologist Trust.

PLA-b-PEG/magnetite hyperthermic agent prepared by Ugi four component condensation

Directory of Open Access Journals (Sweden)

L. P. Icart

2016-03-01

Full Text Available Ugi four component condensation (UFCC, is an important tool for the synthesis of different types of bioconjugate species. In this study, a PLA-PEG/magnetite magnetic composite was prepared by a synthetic-route approach based on UFCC. In particular, poly(lactic acid (PLA was synthesized by autocatalytic polycondensation. Also, poly(ethyleneglycol bis-amine (bis-amine PEG was synthesized by two different methods: via carbonyldiimidazol (CDI/ethylenediamine (ED (75% yield and via chlorate monochlorated acetyl (CCA/ED (95% yield. All products were characterized by gel permeation chromatography (GPC, hydrogen-1 nuclear magnetic resonance (NMR 1H, Fourier transform infrared (FTIR, differential scanning calorimetry (DSC and thermogravimetric analysis (TGA. In addition, magnetite was prepared and modified to generate aldehyde groups which are also necessary for UFCC. This product was characterized by DSC, TGA, X-ray diffraction (XRD and magnetic force (MF techniques. Also, the magnetic composite PLA-PEG/magnetite was synthesized by UFCC. The calculated yield was equal to 80%. Furthermore, magnetic microspheres were prepared by the procedure of emulsion solvent-evaporation and characterized by scanning electron microscopy (SEM and magnetic induction hyperthermia (MIH. The main contribution of these results is to propose a new application for UFCC in the preparation of biomasked magnetic drug delivery systems able to improve the cancer treatment and even the welfare of the patients.

Simulation system architecture design for generic communications link

Science.gov (United States)

Tsang, Chit-Sang; Ratliff, Jim

1986-01-01

This paper addresses a computer simulation system architecture design for generic digital communications systems. It addresses the issues of an overall system architecture in order to achieve a user-friendly, efficient, and yet easily implementable simulation system. The system block diagram and its individual functional components are described in detail. Software implementation is discussed with the VAX/VMS operating system used as a target environment.

4th Conference on Advances in architectural geometry 2014

CERN Document Server

Knippers, Jan; Mitra, Niloy; Wang, Wenping

2015-01-01

This book contains 24 technical papers presented at the fourth edition of the Advances in Architectural Geometry conference, AAG 2014, held in London, England, September 2014. It offers engineers, mathematicians, designers, and contractors insight into the efficient design, analysis, and manufacture of complex shapes, which will help open up new horizons for architecture. The book examines geometric aspects involved in architectural design, ranging from initial conception to final fabrication. It focuses on four key topics: applied geometry, architecture, computational design, and also practice in the form of case studies. In addition, the book also features algorithms, proposed implementation, experimental results, and illustrations. Overall, the book presents both theoretical and practical work linked to new geometrical developments in architecture. It gathers the diverse components of the contemporary architectural tendencies that push the building envelope towards free form in order to respond to multiple...

Security Aspects of an Enterprise-Wide Network Architecture.

Science.gov (United States)

Loew, Robert; Stengel, Ingo; Bleimann, Udo; McDonald, Aidan

1999-01-01

Presents an overview of two projects that concern local area networks and the common point between networks as they relate to network security. Discusses security architectures based on firewall components, packet filters, application gateways, security-management components, an intranet solution, user registration by Web form, and requests for…

Component-based development of software language engineering tools

NARCIS (Netherlands)

Ssanyu, J.; Hemerik, C.

2011-01-01

In this paper we outline how Software Language Engineering (SLE) could benefit from Component-based Software Development (CBSD) techniques and present an architecture aimed at developing a coherent set of lightweight SLE components, fitting into a general-purpose component framework. In order to

Genotypic Variation in Yield, Yield Components, Root Morphology and Architecture, in Soybean in Relation to Water and Phosphorus Supply

Science.gov (United States)

He, Jin; Jin, Yi; Du, Yan-Lei; Wang, Tao; Turner, Neil C.; Yang, Ru-Ping; Siddique, Kadambot H. M.; Li, Feng-Min

2017-01-01

Water shortage and low phosphorus (P) availability limit yields in soybean. Roots play important roles in water-limited and P-deficient environment, but the underlying mechanisms are largely unknown. In this study we determined the responses of four soybean [Glycine max (L.) Merr.] genotypes [Huandsedadou (HD), Bailudou (BLD), Jindou 21 (J21), and Zhonghuang 30 (ZH)] to three P levels [applied 0 (P0), 60 (P60), and 120 (P120) mg P kg-1 dry soil to the upper 0.4 m of the soil profile] and two water treatment [well-watered (WW) and water-stressed (WS)] with special reference to root morphology and architecture, we compared yield and its components, root morphology and root architecture to find out which variety and/or what kind of root architecture had high grain yield under P and drought stress. The results showed that water stress and low P, respectively, significantly reduced grain yield by 60 and 40%, daily water use by 66 and 31%, P accumulation by 40 and 80%, and N accumulation by 39 and 65%. The cultivar ZH with the lowest daily water use had the highest grain yield at P60 and P120 under drought. Increased root length was positively associated with N and P accumulation in both the WW and WS treatments, but not with grain yield under water and P deficits. However, in the WS treatment, high adventitious and lateral root densities were associated with high N and P uptake per unit root length which in turn was significantly and positively associated with grain yield. Our results suggest that (1) genetic variation of grain yield, daily water use, P and N accumulation, and root morphology and architecture were observed among the soybean cultivars and ZH had the best yield performance under P and water limited conditions; (2) water has a major influence on nutrient uptake and grain yield, while additional P supply can modestly increase yields under drought in some soybean genotypes; (3) while conserved water use plays an important role in grain yield under drought

Information architecture for a planetary 'exploration web'

Science.gov (United States)

Lamarra, N.; McVittie, T.

2002-01-01

'Web services' is a common way of deploying distributed applications whose software components and data sources may be in different locations, formats, languages, etc. Although such collaboration is not utilized significantly in planetary exploration, we believe there is significant benefit in developing an architecture in which missions could leverage each others capabilities. We believe that an incremental deployment of such an architecture could significantly contribute to the evolution of increasingly capable, efficient, and even autonomous remote exploration.

Deciphering structural and temporal interplays during the architectural development of mango trees.

Science.gov (United States)

Dambreville, Anaëlle; Lauri, Pierre-Éric; Trottier, Catherine; Guédon, Yann; Normand, Frédéric

2013-05-01

Plant architecture is commonly defined by the adjacency of organs within the structure and their properties. Few studies consider the effect of endogenous temporal factors, namely phenological factors, on the establishment of plant architecture. This study hypothesized that, in addition to the effect of environmental factors, the observed plant architecture results from both endogenous structural and temporal components, and their interplays. Mango tree, which is characterized by strong phenological asynchronisms within and between trees and by repeated vegetative and reproductive flushes during a growing cycle, was chosen as a plant model. During two consecutive growing cycles, this study described vegetative and reproductive development of 20 trees submitted to the same environmental conditions. Four mango cultivars were considered to assess possible cultivar-specific patterns. Integrative vegetative and reproductive development models incorporating generalized linear models as components were built. These models described the occurrence, intensity, and timing of vegetative and reproductive development at the growth unit scale. This study showed significant interplays between structural and temporal components of plant architectural development at two temporal scales. Within a growing cycle, earliness of bud burst was highly and positively related to earliness of vegetative development and flowering. Between growing cycles, flowering growth units delayed vegetative development compared to growth units that did not flower. These interplays explained how vegetative and reproductive phenological asynchronisms within and between trees were generated and maintained. It is suggested that causation networks involving structural and temporal components may give rise to contrasted tree architectures.

Architecturally Reconfigurable Development of Mobile Games

DEFF Research Database (Denmark)

Zhang, Weishan

2005-01-01

. Mobile game domain variants could be handled uniformly and traced across all kinds of software assets. The architecture and configuration mechanism in our approach make optimizations that built into meta-components propagated to all product line members. We show this approach with an industrial Role-Playing-Game......Mobile game development must face the problem of multiple hardware and software platforms, which will bring large number of variants. To cut the development and maintenance efforts, in this paper, we present an architecturally reconfigurable software product line approach to develop mobile games...

Relaxing Chosen-Ciphertext Security

DEFF Research Database (Denmark)

Canetti, Ran; Krawczyk, Hugo; Nielsen, Jesper Buus

2003-01-01

Security against adaptive chosen ciphertext attacks (or, CCA security) has been accepted as the standard requirement from encryption schemes that need to withstand active attacks. In particular, it is regarded as the appropriate security notion for encryption schemes used as components within...... general protocols and applications. Indeed, CCA security was shown to suffice in a large variety of contexts. However, CCA security often appears to be somewhat too strong: there exist encryption schemes (some of which come up naturally in practice) that are not CCA secure, but seem sufficiently secure...... “for most practical purposes.” We propose a relaxed variant of CCA security, called Replayable CCA (RCCA) security. RCCA security accepts as secure the non-CCA (yet arguably secure) schemes mentioned above; furthermore, it suffices for most existing applications of CCA security. We provide three...

Hadoop Oriented Smart Cities Architecture

Science.gov (United States)

Bologa, Ana-Ramona; Bologa, Razvan

2018-01-01

A smart city implies a consistent use of technology for the benefit of the community. As the city develops over time, components and subsystems such as smart grids, smart water management, smart traffic and transportation systems, smart waste management systems, smart security systems, or e-governance are added. These components ingest and generate a multitude of structured, semi-structured or unstructured data that may be processed using a variety of algorithms in batches, micro batches or in real-time. The ICT architecture must be able to handle the increased storage and processing needs. When vertical scaling is no longer a viable solution, Hadoop can offer efficient linear horizontal scaling, solving storage, processing, and data analyses problems in many ways. This enables architects and developers to choose a stack according to their needs and skill-levels. In this paper, we propose a Hadoop-based architectural stack that can provide the ICT backbone for efficiently managing a smart city. On the one hand, Hadoop, together with Spark and the plethora of NoSQL databases and accompanying Apache projects, is a mature ecosystem. This is one of the reasons why it is an attractive option for a Smart City architecture. On the other hand, it is also very dynamic; things can change very quickly, and many new frameworks, products and options continue to emerge as others decline. To construct an optimized, modern architecture, we discuss and compare various products and engines based on a process that takes into consideration how the products perform and scale, as well as the reusability of the code, innovations, features, and support and interest in online communities. PMID:29649172

Hadoop Oriented Smart Cities Architecture

Directory of Open Access Journals (Sweden)

Vlad Diaconita

2018-04-01

Full Text Available A smart city implies a consistent use of technology for the benefit of the community. As the city develops over time, components and subsystems such as smart grids, smart water management, smart traffic and transportation systems, smart waste management systems, smart security systems, or e-governance are added. These components ingest and generate a multitude of structured, semi-structured or unstructured data that may be processed using a variety of algorithms in batches, micro batches or in real-time. The ICT architecture must be able to handle the increased storage and processing needs. When vertical scaling is no longer a viable solution, Hadoop can offer efficient linear horizontal scaling, solving storage, processing, and data analyses problems in many ways. This enables architects and developers to choose a stack according to their needs and skill-levels. In this paper, we propose a Hadoop-based architectural stack that can provide the ICT backbone for efficiently managing a smart city. On the one hand, Hadoop, together with Spark and the plethora of NoSQL databases and accompanying Apache projects, is a mature ecosystem. This is one of the reasons why it is an attractive option for a Smart City architecture. On the other hand, it is also very dynamic; things can change very quickly, and many new frameworks, products and options continue to emerge as others decline. To construct an optimized, modern architecture, we discuss and compare various products and engines based on a process that takes into consideration how the products perform and scale, as well as the reusability of the code, innovations, features, and support and interest in online communities.

Hadoop Oriented Smart Cities Architecture.

Science.gov (United States)

Diaconita, Vlad; Bologa, Ana-Ramona; Bologa, Razvan

2018-04-12

A smart city implies a consistent use of technology for the benefit of the community. As the city develops over time, components and subsystems such as smart grids, smart water management, smart traffic and transportation systems, smart waste management systems, smart security systems, or e-governance are added. These components ingest and generate a multitude of structured, semi-structured or unstructured data that may be processed using a variety of algorithms in batches, micro batches or in real-time. The ICT architecture must be able to handle the increased storage and processing needs. When vertical scaling is no longer a viable solution, Hadoop can offer efficient linear horizontal scaling, solving storage, processing, and data analyses problems in many ways. This enables architects and developers to choose a stack according to their needs and skill-levels. In this paper, we propose a Hadoop-based architectural stack that can provide the ICT backbone for efficiently managing a smart city. On the one hand, Hadoop, together with Spark and the plethora of NoSQL databases and accompanying Apache projects, is a mature ecosystem. This is one of the reasons why it is an attractive option for a Smart City architecture. On the other hand, it is also very dynamic; things can change very quickly, and many new frameworks, products and options continue to emerge as others decline. To construct an optimized, modern architecture, we discuss and compare various products and engines based on a process that takes into consideration how the products perform and scale, as well as the reusability of the code, innovations, features, and support and interest in online communities.

Specifying structural constraints of architectural patterns in the ARCHERY language

International Nuclear Information System (INIS)

Sanchez, Alejandro; Barbosa, Luis S.; Riesco, Daniel

2015-01-01

ARCHERY is an architectural description language for modelling and reasoning about distributed, heterogeneous and dynamically reconfigurable systems in terms of architectural patterns. The language supports the specification of architectures and their reconfiguration. This paper introduces a language extension for precisely describing the structural design decisions that pattern instances must respect in their (re)configurations. The extension is a propositional modal logic with recursion and nominals referencing components, i.e., a hybrid µ-calculus. Its expressiveness allows specifying safety and liveness constraints, as well as paths and cycles over structures. Refinements of classic architectural patterns are specified

Specifying structural constraints of architectural patterns in the ARCHERY language

Energy Technology Data Exchange (ETDEWEB)

Sanchez, Alejandro [Departamento de Informática, Universidad Nacional de San Luis, Ejército de los Andes 950, D5700HHW San Luis (Argentina); HASLab INESC TEC and Universidade do Minho, Campus de Gualtar, 4710-057 Braga (Portugal); Barbosa, Luis S. [HASLab INESC TEC and Universidade do Minho, Campus de Gualtar, 4710-057 Braga (Portugal); Riesco, Daniel [Departamento de Informática, Universidad Nacional de San Luis, Ejército de los Andes 950, D5700HHW San Luis (Argentina)

2015-03-10

ARCHERY is an architectural description language for modelling and reasoning about distributed, heterogeneous and dynamically reconfigurable systems in terms of architectural patterns. The language supports the specification of architectures and their reconfiguration. This paper introduces a language extension for precisely describing the structural design decisions that pattern instances must respect in their (re)configurations. The extension is a propositional modal logic with recursion and nominals referencing components, i.e., a hybrid µ-calculus. Its expressiveness allows specifying safety and liveness constraints, as well as paths and cycles over structures. Refinements of classic architectural patterns are specified.

A Novel Multimodal Biometrics Recognition Model Based on Stacked ELM and CCA Methods

Directory of Open Access Journals (Sweden)

Jucheng Yang

2018-04-01

Full Text Available Multimodal biometrics combine a variety of biological features to have a significant impact on identification performance, which is a newly developed trend in biometrics identification technology. This study proposes a novel multimodal biometrics recognition model based on the stacked extreme learning machines (ELMs and canonical correlation analysis (CCA methods. The model, which has a symmetric structure, is found to have high potential for multimodal biometrics. The model works as follows. First, it learns the hidden-layer representation of biological images using extreme learning machines layer by layer. Second, the canonical correlation analysis method is applied to map the representation to a feature space, which is used to reconstruct the multimodal image feature representation. Third, the reconstructed features are used as the input of a classifier for supervised training and output. To verify the validity and efficiency of the method, we adopt it for new hybrid datasets obtained from typical face image datasets and finger-vein image datasets. Our experimental results demonstrate that our model performs better than traditional methods.

Exploring Socio-material Orderings in Ethnography of Architectural Design

DEFF Research Database (Denmark)

Lotz, Katrine; Stang Våland, Marianne

How can the socio-material assemblages involved in contemporary ‘doings of architecture’ be identified and studied? The paper discusses recent transformations within architectural design practice and the extended network of local actors and technologies mobilized in contemporary building...... construction. Interested in examining how the current requirements in the field are – and can be - handled in architectural production, we aim to contribute to the ongoing development of ethnography of Architectural Design (Yaneva 2008, 2009, 2012). In our research, we focus on recent requirements...... in contemporary architectural design. We attempt to follow the actors in detail through their socio-material involvements and ‘architectural inventions’ such as visualized motives of space, materials, atmospheres, buildingparts and -components, and to explore how relations continuously tie and untie as a means...

Spatial Narrative As Feature Of Singularity In Sacral Architecture

Directory of Open Access Journals (Sweden)

Gytis Oržikauskas

2014-05-01

Full Text Available The paper analyses architectural compositions of various religious complexes – historical and contemporary – apart from their stylistic features. The most prominent ensembles under analysis have one noticeably common feature – spatial narrative. The foreseen sequence of forms of experience and spatial structure tell different religious narratives depending on which different aspects of faith were actualized in a given period. The analyzed examples stand in proof that suggestibility of religious aspects in sacral architecture are inseparable from their artistic suggestibility aspects. In some cases, these aspects are less related to architectural stylistic means, but have a direct connection to such components of architectural compositions as foreseen sequence of a visitor’s experience and semantics of particular forms, i.e. architectural narrative, which is achieved not only through the means of perception of space, but also by the relationship to social and cultural meanings and subtext of architecture.

3D DIGITAL SIMULATION OF MINNAN TEMPLE ARCHITECTURE CAISSON'S CRAFT TECHNIQUES

OpenAIRE

Y. C. Lin; T. C. Wu; M. F. Hsu

2013-01-01

Caisson is one of the important representations of the Minnan (southern Fujian) temple architecture craft techniques and decorative aesthetics. The special component design and group building method present the architectural thinking and personal characteristics of great carpenters of Minnan temple architecture. In late Qing Dynasty, the appearance and style of caissons of famous temples in Taiwan apparently presented the building techniques of the great carpenters. However, as the y...

Design of multi-tiered database application based on CORBA component in SDUV-FEL system

International Nuclear Information System (INIS)

Sun Xiaoying; Shen Liren; Dai Zhimin

2004-01-01

The drawback of usual two-tiered database architecture was analyzed and the Shanghai Deep Ultraviolet-Free Electron Laser database system under development was discussed. A project for realizing the multi-tiered database architecture based on common object request broker architecture (CORBA) component and middleware model constructed by C++ was presented. A magnet database was given to exhibit the design of the CORBA component. (authors)

The CCA-end of P-tRNA Contacts Both the Human RPL36AL and the A-site Bound Translation Termination Factor eRF1 at the Peptidyl Transferase Center of the Human 80S Ribosome.

Science.gov (United States)

Hountondji, Codjo; Bulygin, Konstantin; Créchet, Jean-Bernard; Woisard, Anne; Tuffery, Pierre; Nakayama, Jun-Ichi; Frolova, Ludmila; Nierhaus, Knud H; Karpova, Galina; Baouz, Soria

2014-01-01

We have demonstrated previously that the E-site specific protein RPL36AL present in human ribosomes can be crosslinked with the CCA-end of a P-tRNA in situ. Here we report the following: (i) We modeled RPL36AL into the structure of the archaeal ortholog RPL44E extracted from the known X-ray structure of the 50S subunit of Haloarcula marismortui. Superimposing the obtained RPL36AL structure with that of P/E tRNA observed in eukaryotic 80S ribosomes suggested that RPL36AL might in addition to its CCA neighbourhood interact with the inner site of the tRNA elbow similar to an interaction pattern known from tRNA•synthetase pairs. (ii) Accordingly, we detected that the isolated recombinant protein RPL36AL can form a tight binary complex with deacylated tRNA, and even tRNA fragments truncated at their CCA end showed a high affinity in the nanomolar range supporting a strong interaction outside the CCA end. (iii) We constructed programmed 80S complexes containing the termination factor eRF1 (stop codon UAA at the A-site) and a 2',3'-dialdehyde tRNA (tRNAox) analog at the P-site. Surprisingly, we observed a crosslinked ternary complex containing the tRNA, eRF1 and RPL36AL crosslinked both to the aldehyde groups of tRNAox at the 2'- and 3'-positions of the ultimate A. We also demonstrated that, upon binding to the ribosomal A-site, eRF1 induces an alternative conformation of the ribosome and/or the tRNA, leading to a novel crosslink of tRNAox to another large-subunit ribosomal protein (namely L37) rather than to RPL36AL, both ribosomal proteins being labeled in a mutually exclusive fashion. Since the human 80S ribosome in complex with P-site bound tRNAox and A-site bound eRF1 corresponds to the post-termination state of the ribosome, the results represent the first biochemical evidence for the positioning of the CCA-arm of the P-tRNA in close proximity to both RPL36AL and eRF1 at the end of the translation process.

HyperCell : A Bio-inspired Design Framework for Real-time Interactive Architectures

NARCIS (Netherlands)

Chang, J.R.

2018-01-01

This pioneering research focuses on Biomimetic Interactive Architecture using “Computation”, “Embodiment”, and “Biology” to generate an intimate embodied convergence to propose a novel rule-based design framework for creating organic architectures composed of swarm-based intelligent components.

A Bayesian Approach to Model Selection in Hierarchical Mixtures-of-Experts Architectures.

Science.gov (United States)

Tanner, Martin A.; Peng, Fengchun; Jacobs, Robert A.

1997-03-01

There does not exist a statistical model that shows good performance on all tasks. Consequently, the model selection problem is unavoidable; investigators must decide which model is best at summarizing the data for each task of interest. This article presents an approach to the model selection problem in hierarchical mixtures-of-experts architectures. These architectures combine aspects of generalized linear models with those of finite mixture models in order to perform tasks via a recursive "divide-and-conquer" strategy. Markov chain Monte Carlo methodology is used to estimate the distribution of the architectures' parameters. One part of our approach to model selection attempts to estimate the worth of each component of an architecture so that relatively unused components can be pruned from the architecture's structure. A second part of this approach uses a Bayesian hypothesis testing procedure in order to differentiate inputs that carry useful information from nuisance inputs. Simulation results suggest that the approach presented here adheres to the dictum of Occam's razor; simple architectures that are adequate for summarizing the data are favored over more complex structures. Copyright 1997 Elsevier Science Ltd. All Rights Reserved.

Outline of a novel architecture for cortical computation.

Science.gov (United States)

Majumdar, Kaushik

2008-03-01

In this paper a novel architecture for cortical computation has been proposed. This architecture is composed of computing paths consisting of neurons and synapses. These paths have been decomposed into lateral, longitudinal and vertical components. Cortical computation has then been decomposed into lateral computation (LaC), longitudinal computation (LoC) and vertical computation (VeC). It has been shown that various loop structures in the cortical circuit play important roles in cortical computation as well as in memory storage and retrieval, keeping in conformity with the molecular basis of short and long term memory. A new learning scheme for the brain has also been proposed and how it is implemented within the proposed architecture has been explained. A few mathematical results about the architecture have been proposed, some of which are without proof.

Orthogonal transformations for change detection, Matlab code

DEFF Research Database (Denmark)

2005-01-01

Matlab code to do multivariate alteration detection (MAD) analysis, maximum autocorrelation factor (MAF) analysis, canonical correlation analysis (CCA) and principal component analysis (PCA) on image data.......Matlab code to do multivariate alteration detection (MAD) analysis, maximum autocorrelation factor (MAF) analysis, canonical correlation analysis (CCA) and principal component analysis (PCA) on image data....

Bio-inspired adaptive feedback error learning architecture for motor control.

Science.gov (United States)

Tolu, Silvia; Vanegas, Mauricio; Luque, Niceto R; Garrido, Jesús A; Ros, Eduardo

2012-10-01

This study proposes an adaptive control architecture based on an accurate regression method called Locally Weighted Projection Regression (LWPR) and on a bio-inspired module, such as a cerebellar-like engine. This hybrid architecture takes full advantage of the machine learning module (LWPR kernel) to abstract an optimized representation of the sensorimotor space while the cerebellar component integrates this to generate corrective terms in the framework of a control task. Furthermore, we illustrate how the use of a simple adaptive error feedback term allows to use the proposed architecture even in the absence of an accurate analytic reference model. The presented approach achieves an accurate control with low gain corrective terms (for compliant control schemes). We evaluate the contribution of the different components of the proposed scheme comparing the obtained performance with alternative approaches. Then, we show that the presented architecture can be used for accurate manipulation of different objects when their physical properties are not directly known by the controller. We evaluate how the scheme scales for simulated plants of high Degrees of Freedom (7-DOFs).

Outline of a novel architecture for cortical computation

OpenAIRE

Majumdar, Kaushik

2007-01-01

In this paper a novel architecture for cortical computation has been proposed. This architecture is composed of computing paths consisting of neurons and synapses only. These paths have been decomposed into lateral, longitudinal and vertical components. Cortical computation has then been decomposed into lateral computation (LaC), longitudinal computation (LoC) and vertical computation (VeC). It has been shown that various loop structures in the cortical circuit play important roles in cortica...

2005 dossier: granite. Tome: architecture and management of the geologic disposal

International Nuclear Information System (INIS)

2005-01-01

This document makes a status of the researches carried out by the French national agency of radioactive wastes (ANDRA) about the geologic disposal of high-level and long-lived radioactive wastes in granite formations. Content: 1 - Approach of the study: main steps since the December 30, 1991 law, ANDRA's research program on disposal in granitic formations; 2 - high-level and long-lived (HLLL) wastes: production scenarios, waste categories, inventory model; 3 - disposal facility design in granitic environment: definition of the geologic disposal functions, the granitic material, general facility design options; 4 - general architecture of a disposal facility in granitic environment: surface facilities, underground facilities, disposal process, operational safety; 5 - B-type wastes disposal area: primary containers of B-type wastes, safety options, concrete containers, disposal alveoles, architecture of the B-type wastes disposal area, disposal process and feasibility aspects, functions of disposal components with time; 6 - C-type wastes disposal area: C-type wastes primary containers, safety options, super-containers, disposal alveoles, architecture of the C-type wastes disposal area, disposal process in a reversibility logics, functions of disposal components with time; 7 - spent fuels disposal area: spent fuel assemblies, safety options, spent fuel containers, disposal alveoles, architecture of the spent fuel disposal area, disposal process in a reversibility logics, functions of disposal components with time; 8 - conclusions: suitability of the architecture with various types of French granites, strong design, reversibility taken into consideration. (J.S.)

Agricultural Urbanism in the Context of Landscape Ecological Architecture

Science.gov (United States)

Maltseva, I. N.; Kaganovich, N. N.; Mindiyrova, T. N.

2017-11-01

The article analyzes some of the fundamental aspects of cities sustainable development connected in many respects with the concept of ecological architecture. One of the main concepts of sustainability is considered in detail: the city as an eco-sustainable and balanced system, architectural objects as a full-fledged part of this system, which, most likely, will be determined by one of the directions of this development - the development of landscape architecture as an tool for integration of nature into the urban environment. At the same time, the variety of its functional forms and architectural methods in the system of organization of internal and external space is outlined as well as its interrelation with energy-saving architecture defining them as the two most important components of eco-sustainable development. The development forms of landscape architecture are considered in the review of analogs, as an example (agricultural urbanism object) a thesis on the topic “Vertical Farm Agroindustrial Complex” is presented.

Innovative on board payload optical architecture for high throughput satellites

Science.gov (United States)

Baudet, D.; Braux, B.; Prieur, O.; Hughes, R.; Wilkinson, M.; Latunde-Dada, K.; Jahns, J.; Lohmann, U.; Fey, D.; Karafolas, N.

2017-11-01

For the next generation of HighThroughPut (HTP) Telecommunications Satellites, space end users' needs will result in higher link speeds and an increase in the number of channels; up to 512 channels running at 10Gbits/s. By keeping electrical interconnections based on copper, the constraints in term of power dissipation, number of electrical wires and signal integrity will become too demanding. The replacement of the electrical links by optical links is the most adapted solution as it provides high speed links with low power consumption and no EMC/EMI. But replacing all electrical links by optical links of an On Board Payload (OBP) is challenging. It is not simply a matter of replacing electrical components with optical but rather the whole concept and architecture have to be rethought to achieve a high reliability and high performance optical solution. In this context, this paper will present the concept of an Innovative OBP Optical Architecture. The optical architecture was defined to meet the critical requirements of the application: signal speed, number of channels, space reliability, power dissipation, optical signals crossing and components availability. The resulting architecture is challenging and the need for new developments is highlighted. But this innovative optically interconnected architecture will substantially outperform standard electrical ones.

Promoting the Effect of the Qing Dynasty Imperial Garden Architectural Component Library on the Digitalization of Cultural Heritage

Science.gov (United States)

Jindan, C.; Junsong, Z.; Jiujun, Z.

2015-08-01

With the development of computer technology and practical verification, digital virtual technology has matured and is increasingly being widely applied to cultural heritage protection and research. With this advancement in technology, there is pressing need to simplify heritage-related puzzles. Thus the main question that has increasingly become the most central and fundamental problem in heritage digitalization work is how to choose the "proper technology" that provides support directly, accurately and rapidly for the research, protection and exchange of cultural heritage. Based on the principles of "authenticity" and "completeness" found in the Venice Charter in regards to dealing with cultural heritage; this paper proposes the concept of the component library which facilitates the improvement and efficiency of virtual reconstruction, provides a visual discussion platform for cultural heritage protection, virtual scene construction, accuracy assessment, and multi-space-time exhibition; thereby implementing the spirit of tolerance and respect found in the Nara Document on Authenticity. The paper further aims to illustrate the significance of the Qing dynasty imperial garden architectural component library for cultural heritage study and protection, the principles for virtual library construction, use and maintenance of the library, and classification approaches, and also provide some suggestions about making high quality 3D models and effective means for database integration.

A Flexible Binding Site Architecture Provides New Insights into CcpA Global Regulation in Gram-Positive Bacteria

Directory of Open Access Journals (Sweden)

Yunpeng Yang

2017-01-01

Full Text Available Catabolite control protein A (CcpA is the master regulator in Gram-positive bacteria that mediates carbon catabolite repression (CCR and carbon catabolite activation (CCA, two fundamental regulatory mechanisms that enable competitive advantages in carbon catabolism. It is generally regarded that CcpA exerts its regulatory role by binding to a typical 14- to 16-nucleotide (nt consensus site that is called a catabolite response element (cre within the target regions. However, here we report a previously unknown noncanonical flexible architecture of the CcpA-binding site in solventogenic clostridia, providing new mechanistic insights into catabolite regulation. This novel CcpA-binding site, named crevar, has a unique architecture that consists of two inverted repeats and an intervening spacer, all of which are variable in nucleotide composition and length, except for a 6-bp core palindromic sequence (TGTAAA/TTTACA. It was found that the length of the intervening spacer of crevar can affect CcpA binding affinity, and moreover, the core palindromic sequence of crevar is the key structure for regulation. Such a variable architecture of crevar shows potential importance for CcpA’s diverse and fine regulation. A total of 103 potential crevar sites were discovered in solventogenic Clostridium acetobutylicum, of which 42 sites were picked out for electrophoretic mobility shift assays (EMSAs, and 30 sites were confirmed to be bound by CcpA. These 30 crevar sites are associated with 27 genes involved in many important pathways. Also of significance, the crevar sites are found to be widespread and function in a great number of taxonomically different Gram-positive bacteria, including pathogens, suggesting their global role in Gram-positive bacteria.

Miniaturized Analytical Platforms From Nanoparticle Components: Studies in the Construction, Characterization, and High-Throughput Usage of These Novel Architectures

Energy Technology Data Exchange (ETDEWEB)

Pris, Andrew David [Iowa State Univ., Ames, IA (United States)

2003-01-01

The scientific community has recently experienced an overall effort to reduce the physical size of many experimental components to the nanometer size range. This size is unique as the characteristics of this regime involve aspects of pure physics, biology, and chemistry. One extensively studied example of a nanometer sized experimental component, which acts as a junction between these three principle scientific theologies, is deoxyribonucleic acid (DNA) or ribonucleic acid (RNA). These biopolymers not only contain the biological genetic guide to code for the production of life-sustaining materials, but are also being probed by physicists as a means to create electrical circuits and furthermore as controllable architectural and sensor motifs in the chemical disciplines. Possibly the most common nano-sized component between these sciences are nanoparticles composed of a variety of materials. The cross discipline employment of nanoparticles is evident from the vast amount of literature that has been produced from each of the individual communities within the last decade. Along these cross-discipline lines, this dissertation examines the use of several different types of nanoparticles with a wide array of surface chemistries to understand their adsorption properties and to construct unique miniaturized analytical and immunoassay platforms. This introduction will act as a literature review to provide key information regarding the synthesis and surface chemistries of several types of nanoparticles. This material will set the stage for a discussion of assembling ordered arrays of nanoparticles into functional platforms, architectures, and sensors. The introduction will also include a short explanation of the atomic force microscope that is used throughout the thesis to characterize the nanoparticle-based structures. Following the Introduction, four research chapters are presented as separate manuscripts. Chapter 1 examines the self-assembly of polymeric nanoparticles

An integrated architecture for shallow and deep processing

OpenAIRE

Crysmann, Berthold; Frank, Anette; Kiefer, Bernd; Müller, Stefan; Neumann, Günter; Piskorski, Jakub; Schäfer, Ulrich; Siegel, Melanie; Uszkoreit, Hans; Xu, Feiyu; Becker, Markus; Krieger, Hans-Ulrich

2011-01-01

We present an architecture for the integration of shallow and deep NLP components which is aimed at flexible combination of different language technologies for a range of practical current and future applications. In particular, we describe the integration of a high-level HPSG parsing system with different high-performance shallow components, ranging from named entity recognition to chunk parsing and shallow clause recognition. The NLP components enrich a representation of natural language te...

Evolution of bow-tie architectures in biology.

Directory of Open Access Journals (Sweden)

Tamar Friedlander

2015-03-01

Full Text Available Bow-tie or hourglass structure is a common architectural feature found in many biological systems. A bow-tie in a multi-layered structure occurs when intermediate layers have much fewer components than the input and output layers. Examples include metabolism where a handful of building blocks mediate between multiple input nutrients and multiple output biomass components, and signaling networks where information from numerous receptor types passes through a small set of signaling pathways to regulate multiple output genes. Little is known, however, about how bow-tie architectures evolve. Here, we address the evolution of bow-tie architectures using simulations of multi-layered systems evolving to fulfill a given input-output goal. We find that bow-ties spontaneously evolve when the information in the evolutionary goal can be compressed. Mathematically speaking, bow-ties evolve when the rank of the input-output matrix describing the evolutionary goal is deficient. The maximal compression possible (the rank of the goal determines the size of the narrowest part of the network-that is the bow-tie. A further requirement is that a process is active to reduce the number of links in the network, such as product-rule mutations, otherwise a non-bow-tie solution is found in the evolutionary simulations. This offers a mechanism to understand a common architectural principle of biological systems, and a way to quantitate the effective rank of the goals under which they evolved.

Enterprise Architecture in the Company Management Framework

Directory of Open Access Journals (Sweden)

Bojinov Bojidar Violinov

2016-11-01

Full Text Available The study aims to explore the role and importance of the concept of enterprise architecture in modern company management. For this purpose it clarifies the nature, scope, components of the enterprise architecture and relationships within it using the Zachman model. Based on the critical analysis of works by leading scientists, there presented a definition of enterprise architecture as a general description of all elements of strategic management of the company combined with description of its organizational, functional and operational structure, including the relationship between all tangible and intangible resources essential for its normal functioning and development. This in turn enables IT enterprise architecture to be defined as a set of corporate IT resources (hardware, software and technology, their interconnection and integration within the overall architecture of the company, as well as their formal description, methods and tools for their modeling and management in order to achieve strategic business goals of the organization. In conclusion the article summarizes the significance and role of enterprise architecture for strategic management of the company in today’s digital economy. The study underlines the importance of an integrated multidisciplinary approach to the work of a contemporary company, and the need for adequate matching and alignment of IT with business priorities and objectives of the company.

Cognitive Architecture of Common and Scientific Concepts

Science.gov (United States)

Tarábek, Paul

2010-07-01

The cognitive architecture of concept is a specific structure consisting of the concept core, concept periphery, the semantic frame as the meaning and the sense of the concept, and the relations among all components of this structure. The model of the cognitive architecture of scientific and common concepts is a conceptual meta-model built upon Vygotsky's concept theory, Fillmore's semantic frame, semantic triangle, on widespread ideas of the structuring of conceptual systems, and the Hestenes' Modeling Theory. The method of semantic mapping of concepts flowing from the model is designed.

Generation of a Multicomponent Library of Disulfide Donor-Acceptor Architectures Using Dynamic Combinatorial Chemistry.

Science.gov (United States)

Drożdż, Wojciech; Kołodziejski, Michał; Markiewicz, Grzegorz; Jenczak, Anna; Stefankiewicz, Artur R

2015-07-17

We describe here the generation of new donor-acceptor disulfide architectures obtained in aqueous solution at physiological pH. The application of a dynamic combinatorial chemistry approach allowed us to generate a large number of new disulfide macrocyclic architectures together with a new type of [2]catenanes consisting of four distinct components. Up to fifteen types of structurally-distinct dynamic architectures have been generated through one-pot disulfide exchange reactions between four thiol-functionalized aqueous components. The distribution of disulfide products formed was found to be strongly dependent on the structural features of the thiol components employed. This work not only constitutes a success in the synthesis of topologically- and morphologically-complex targets, but it may also open new horizons for the use of this methodology in the construction of molecular machines.

A Proposed Information Architecture for Telehealth System Interoperability

Energy Technology Data Exchange (ETDEWEB)

Warren, S.; Craft, R.L.; Parks, R.C.; Gallagher, L.K.; Garcia, R.J.; Funkhouser, D.R.

1999-04-07

Telemedicine technology is rapidly evolving. Whereas early telemedicine consultations relied primarily on video conferencing, consultations today may utilize video conferencing, medical peripherals, store-and-forward capabilities, electronic patient record management software, and/or a host of other emerging technologies. These remote care systems rely increasingly on distributed, collaborative information technology during the care delivery process, in its many forms. While these leading-edge systems are bellwethers for highly advanced telemedicine, the remote care market today is still immature. Most telemedicine systems are custom-designed and do not interoperate with other commercial offerings. Users are limited to a set of functionality that a single vendor provides and must often pay high prices to obtain this functionality, since vendors in this marketplace must deliver entire systems in order to compete. Besides increasing corporate research and development costs, this inhibits the ability of the user to make intelligent purchasing decisions regarding best-of-breed technologies. We propose a secure, object-oriented information architecture for telemedicine systems that promotes plug-and-play interaction between system components through standardized interfaces, communication protocols, messaging formats, and data definitions. In this architecture, each component functions as a black box, and components plug together in a lego-like fashion to achieve the desired device or system functionality. The architecture will support various ongoing standards work in the medical device arena.

An Architecture for Continuous Data Quality Monitoring in Medical Centers.

Science.gov (United States)

Endler, Gregor; Schwab, Peter K; Wahl, Andreas M; Tenschert, Johannes; Lenz, Richard

2015-01-01

In the medical domain, data quality is very important. Since requirements and data change frequently, continuous and sustainable monitoring and improvement of data quality is necessary. Working together with managers of medical centers, we developed an architecture for a data quality monitoring system. The architecture enables domain experts to adapt the system during runtime to match their specifications using a built-in rule system. It also allows arbitrarily complex analyses to be integrated into the monitoring cycle. We evaluate our architecture by matching its components to the well-known data quality methodology TDQM.

SOFA 2 Component Framework and Its Ecosystem

Czech Academy of Sciences Publication Activity Database

Malohlava, M.; Hnětynka, P.; Bureš, Tomáš

2013-01-01

Roč. 295, 9 May (2013), s. 101-106 ISSN 1571-0661. [FESCA 2012. International Workshop on Formal Engineering approaches to Software Components and Architectures /9./. Tallinn, 31.03.2012] R&D Projects: GA ČR GD201/09/H057 Grant - others:GA AV ČR(CZ) GAP202/11/0312; UK(CZ) SVV-2012-265312 Keywords : CBSE * component system * component model * component * sofa * ecosystem * development tool Subject RIV: JC - Computer Hardware ; Software

Comparing architectural solutions of IPT application SDKs utilizing H.323 and SIP

Science.gov (United States)

Keskinarkaus, Anja; Korhonen, Jani; Ohtonen, Timo; Kilpelanaho, Vesa; Koskinen, Esa; Sauvola, Jaakko J.

2001-07-01

This paper presents two approaches to efficient service development for Internet Telephony. In first approach we consider services ranging from core call signaling features and media control as stated in ITU-T's H.323 to end user services that supports user interaction. The second approach supports IETF's SIP protocol. We compare these from differing architectural perspectives, economy of network and terminal development, and propose efficient architecture models for both protocols. In their design, the main criteria were component independence, lightweight operation and portability in heterogeneous end-to-end environments. In proposed architecture, the vertical division of call signaling and streaming media control logic allows for using the components either individually or combined, depending on the level of functionality required by an application.

Flexible distributed architecture for semiconductor process control and experimentation

Science.gov (United States)

Gower, Aaron E.; Boning, Duane S.; McIlrath, Michael B.

1997-01-01

Semiconductor fabrication requires an increasingly expensive and integrated set of tightly controlled processes, driving the need for a fabrication facility with fully computerized, networked processing equipment. We describe an integrated, open system architecture enabling distributed experimentation and process control for plasma etching. The system was developed at MIT's Microsystems Technology Laboratories and employs in-situ CCD interferometry based analysis in the sensor-feedback control of an Applied Materials Precision 5000 Plasma Etcher (AME5000). Our system supports accelerated, advanced research involving feedback control algorithms, and includes a distributed interface that utilizes the internet to make these fabrication capabilities available to remote users. The system architecture is both distributed and modular: specific implementation of any one task does not restrict the implementation of another. The low level architectural components include a host controller that communicates with the AME5000 equipment via SECS-II, and a host controller for the acquisition and analysis of the CCD sensor images. A cell controller (CC) manages communications between these equipment and sensor controllers. The CC is also responsible for process control decisions; algorithmic controllers may be integrated locally or via remote communications. Finally, a system server images connections from internet/intranet (web) based clients and uses a direct link with the CC to access the system. Each component communicates via a predefined set of TCP/IP socket based messages. This flexible architecture makes integration easier and more robust, and enables separate software components to run on the same or different computers independent of hardware or software platform.

Application architecture for .NET designing applications and services

CERN Document Server

Microsoft. Redmond

2003-01-01

Get expert architectural and design-level guidance for building distributed solutions with the Microsoft® .NET Framework-learning how to synthesize your knowledge of application development, servers, and infrastructure and business requirements. This guide assumes you are familiar with .NET component development and the basic principles of a layered distributed application design. It examines architectural issues and solution design for a range of project stakeholders-whether you build and design applications and services, recommend appropriate technologies and products for applications and s

MOMCC: Market-Oriented Architecture for Mobile Cloud Computing Based on Service Oriented Architecture

OpenAIRE

Abolfazli, Saeid; Sanaei, Zohreh; Gani, Abdullah; Shiraz, Muhammad

2012-01-01

The vision of augmenting computing capabilities of mobile devices, especially smartphones with least cost is likely transforming to reality leveraging cloud computing. Cloud exploitation by mobile devices breeds a new research domain called Mobile Cloud Computing (MCC). However, issues like portability and interoperability should be addressed for mobile augmentation which is a non-trivial task using component-based approaches. Service Oriented Architecture (SOA) is a promising design philosop...

H‐shaped double graft copolymers: Effect of molecular architecture on morphology

International Nuclear Information System (INIS)

Lee, Chin; Gido, Samuel P.; Poulos, Yiannis; Hadjichristidis, Nikos; Tan, Nora Beck; Trevino, Samuel F.; Mays, Jimmy W.

1997-01-01

The morphologies formed by block copolymers with a double‐graft, H or S 2 IS 2 architecture were investigated using transmission electron microscopy (TEM) and small angle neutron scattering (SANS). Here S and I represent blocks of polystyrene and polyisoprene, respectively. These materials were synthesized using anionic polymerization and chlorosilane linking, and they were characterized using size exclusion chromatography, membrane osmometry, and low‐angle laser light scattering. This characterization work confirmed the desired molecular architectures and narrow molecular weight distributions. The results of morphological characterization indicate that one can understand complex grafting architectures by decomposing them into fundamental building blocks, which are taken as the component single graft structures out of which the larger structure is constructed. We propose rules for dividing structures into these components, which we call constituting block copolymers. The morphological behavior of the more complex architecture is approximately equivalent to that of the constituting block copolymer structure. Through the use of the constituting block copolymers we map the experimentally determined morphological behavior of the H architecture onto the morphology diagram calculated by Milner for miktoarm stars [Macromolecules 27, 2333 (1994)]. Mapping the H architecture onto the morphology diagram in this way produces general agreement between experimental results and the model. However, it is found that in the case of the H architecture, as well as in previously published results for I 2 S and I 3 S miktoarm star materials, that the morphology diagram slightly overestimates the amount of shift in the order‐order transition lines produced by asymmetry in molecular architecture. This overestimation in the theory is attribute to a junction point localization effect which was neglected in Milner’s calculation

Architectural slicing

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak; Hansen, Klaus Marius

2013-01-01

Architectural prototyping is a widely used practice, con- cerned with taking architectural decisions through experiments with light- weight implementations. However, many architectural decisions are only taken when systems are already (partially) implemented. This is prob- lematic in the context...... of architectural prototyping since experiments with full systems are complex and expensive and thus architectural learn- ing is hindered. In this paper, we propose a novel technique for harvest- ing architectural prototypes from existing systems, \\architectural slic- ing", based on dynamic program slicing. Given...... a system and a slicing criterion, architectural slicing produces an architectural prototype that contain the elements in the architecture that are dependent on the ele- ments in the slicing criterion. Furthermore, we present an initial design and implementation of an architectural slicer for Java....

A component-based open hypermedia approach to integreting structure services

DEFF Research Database (Denmark)

Grønbæk, Kaj; Nürnberg, Peter J.; Bucka-Lassen, Dirk

1999-01-01

In this paper, we consider the issue of integrating different structure services within a component-based open hypermedia system. We do so by considering the task of collaborative editing, which calls for a variety of different structures traditionally supplied by different structure services. We...... discuss the nature of collaborative editing and how it can be supported by a combination of spatial and navigational hypermedia services. We then present a component-based open hypermedia system architecture and describe various methods of integrating different structure services provided within...... such an architecture. We show the advantages of integration within a component-based framework over other means of integration, highlighting some of the main advantages of the component-based approach to open hypermedia system design and implementation....

The development of component-based information systems

CERN Document Server

Cesare, Sergio de; Macredie, Robert

2015-01-01

This work provides a comprehensive overview of research and practical issues relating to component-based development information systems (CBIS). Spanning the organizational, developmental, and technical aspects of the subject, the original research included here provides fresh insights into successful CBIS technology and application. Part I covers component-based development methodologies and system architectures. Part II analyzes different aspects of managing component-based development. Part III investigates component-based development versus commercial off-the-shelf products (COTS), includi

SUSTAINABLE ARCHITECTURE : WHAT ARCHITECTURE STUDENTS THINK

OpenAIRE

SATWIKO, PRASASTO

2013-01-01

Sustainable architecture has become a hot issue lately as the impacts of climate change become more intense. Architecture educations have responded by integrating knowledge of sustainable design in their curriculum. However, in the real life, new buildings keep coming with designs that completely ignore sustainable principles. This paper discusses the results of two national competitions on sustainable architecture targeted for architecture students (conducted in 2012 and 2013). The results a...

Word-serial Architectures for Filtering and Variable Rate Decimation

Directory of Open Access Journals (Sweden)

Eugene Grayver

2002-01-01

Full Text Available A new flexible architecture is proposed for word-serial filtering and variable rate decimation/interpolation. The architecture is targeted for low power applications requiring medium to low data rate and is ideally suited for implementation on either an ASIC or an FPGA. It combines the small size and low power of an ASIC with the programmability and flexibility of a DSP. An efficient memory addressing scheme eliminates the need for power hungry shift registers and allows full reconfiguration. The decimation ratio, filter length and filter coefficients can all be changed in real time. The architecture takes advantage of coefficient symmetries in linear phase filters and in polyphase components.

Architectural considerations in the certification of modular systems

Energy Technology Data Exchange (ETDEWEB)

Bate, Iain; Kelly, Tim

2003-09-01

Modular system architectures, such as integrated modular avionics (IMA) in the aerospace sector, offer potential benefits of improved flexibility in function allocation, reduced development costs and improved maintainability. However, they require a new certification approach. The traditional approach to certification is to prepare monolithic safety cases as bespoke developments for a specific system in a fixed configuration. However, this nullifies the benefits of flexibility and reduced rework claimed of IMA-based systems and will necessitate the development of new safety cases for all possible (current and future) configurations of the architecture. This paper discusses a modular approach to safety case construction, whereby the safety case is partitioned into separable arguments of safety corresponding with the components of the system architecture. Such an approach relies upon properties of the IMA system architecture (such as segregation and location independence) having been established. The paper describes how such properties can be assessed to show that they are met and trade-offs performed during architecture definition reusing information and techniques from the safety argument process.

Architectural considerations in the certification of modular systems

International Nuclear Information System (INIS)

Bate, Iain; Kelly, Tim

2003-01-01

Modular system architectures, such as integrated modular avionics (IMA) in the aerospace sector, offer potential benefits of improved flexibility in function allocation, reduced development costs and improved maintainability. However, they require a new certification approach. The traditional approach to certification is to prepare monolithic safety cases as bespoke developments for a specific system in a fixed configuration. However, this nullifies the benefits of flexibility and reduced rework claimed of IMA-based systems and will necessitate the development of new safety cases for all possible (current and future) configurations of the architecture. This paper discusses a modular approach to safety case construction, whereby the safety case is partitioned into separable arguments of safety corresponding with the components of the system architecture. Such an approach relies upon properties of the IMA system architecture (such as segregation and location independence) having been established. The paper describes how such properties can be assessed to show that they are met and trade-offs performed during architecture definition reusing information and techniques from the safety argument process

"Sia funzion la rappresentazione". Carlo Lodoli and the Crisis of Architecture

Directory of Open Access Journals (Sweden)

Ungureanu, Cosmin

2011-03-01

Full Text Available Similarly with the progressive turn from magic to sciences, architecture underwent a slow transformation starting with the last decades of the 17thcentury. Inevitably, the increase in rationality provoked the loss of the mythical component that still infused the Early Modern architectural theory. Carlo Lodoli's thought plays an important part in this process, as it carries forth the questioning of the authority of ancient knowledge, practice and aesthetics, while emphasizing the ethical function of architecture. This paper is an attempt to see Lodoli's theory through the lens of the coeval scientific achievements, while presenting him as an actor of the architectural crisis at the end of classical modernity.

Architecture

OpenAIRE

Clear, Nic

2014-01-01

When discussing science fiction’s relationship with architecture, the usual practice is to look at the architecture “in” science fiction—in particular, the architecture in SF films (see Kuhn 75-143) since the spaces of literary SF present obvious difficulties as they have to be imagined. In this essay, that relationship will be reversed: I will instead discuss science fiction “in” architecture, mapping out a number of architectural movements and projects that can be viewed explicitly as scien...

Assembling Components using SysML with Non-Functional Requirements

OpenAIRE

Chouali , Samir; Hammad , Ahmed; Mountassir , Hassan

2013-01-01

International audience; Non-functional requirements of component based systems are important as their functional requirements, therefore they must be considered in components assembly. These properties are beforehand specified with SysML requirement diagram. We specify component based system architecture with SysML block definition diagram, and component behaviors with sequence diagrams. We propose to specify formally component interfaces with interface automata, obtained from requirement and...

CHRONOS architecture: Experiences with an open-source services-oriented architecture for geoinformatics

Science.gov (United States)

Fils, D.; Cervato, C.; Reed, J.; Diver, P.; Tang, X.; Bohling, G.; Greer, D.

2009-01-01

CHRONOS's purpose is to transform Earth history research by seamlessly integrating stratigraphic databases and tools into a virtual on-line stratigraphic record. In this paper, we describe the various components of CHRONOS's distributed data system, including the encoding of semantic and descriptive data into a service-based architecture. We give examples of how we have integrated well-tested resources available from the open-source and geoinformatic communities, like the GeoSciML schema and the simple knowledge organization system (SKOS), into the services-oriented architecture to encode timescale and phylogenetic synonymy data. We also describe on-going efforts to use geospatially enhanced data syndication and informally including semantic information by embedding it directly into the XHTML Document Object Model (DOM). XHTML DOM allows machine-discoverable descriptive data such as licensing and citation information to be incorporated directly into data sets retrieved by users. ?? 2008 Elsevier Ltd. All rights reserved.

Advanced Topology Optimization Methods for Conceptual Architectural Design

DEFF Research Database (Denmark)

Aage, Niels; Amir, Oded; Clausen, Anders

2015-01-01

This paper presents a series of new, advanced topology optimization methods, developed specifically for conceptual architectural design of structures. The proposed computational procedures are implemented as components in the framework of a Grasshopper plugin, providing novel capacities...

Advanced Topology Optimization Methods for Conceptual Architectural Design

DEFF Research Database (Denmark)

Aage, Niels; Amir, Oded; Clausen, Anders

2014-01-01

This paper presents a series of new, advanced topology optimization methods, developed specifically for conceptual architectural design of structures. The proposed computational procedures are implemented as components in the framework of a Grasshopper plugin, providing novel capacities...

Marine bioactive compounds: stereospecific anti-inflammatory activity of natural and synthetic cordiachromene A.

Science.gov (United States)

Benslimane, A F; Pouchus, Y F; Verbist, J F; Petit, J Y; Khettab, E N; Welin, L; Brion, J D

1992-01-01

A new synthesis is proposed for cordiachromene A (CCA), a bioactive component of the ascidian Aplidium antillense Gravier, using a method producing a racemic mixture. The anti-inflammatory activities of a natural extract and a chemically synthetic form of CCA were assessed in vivo by carrageenan-induced rat-paw edema. The activity of synthetic CCA was confirmed by a test on kaolin-induced granuloma in the rat. Strong activities were measured for both CCA, but comparison of results of the first test suggests that only the natural optically active isomer has an anti-inflammatory effect. CCA is similar to indomethacin in its effect on carrageenan-induced rat-paw edema and ten times as active as phenylbutazone.

Modeling Architectural Patterns Using Architectural Primitives

NARCIS (Netherlands)

Zdun, Uwe; Avgeriou, Paris

2005-01-01

Architectural patterns are a key point in architectural documentation. Regrettably, there is poor support for modeling architectural patterns, because the pattern elements are not directly matched by elements in modeling languages, and, at the same time, patterns support an inherent variability that

Technology System Architecture for Web–Based Education

Directory of Open Access Journals (Sweden)

A. Canales–Cruz

2009-04-01

Full Text Available In this paper a new architecture for development of Web–Based Education systems is presented. The se systems are centered in the learner and adapted to their personals needs in intelligent form. The architecture is based on the IEEE 1484 LTSA (Learning Technology System Architecture specification and it assembles to software development and instructional design patterns. On the one hand, the software development pattern is supported under a Multi–Agents System, it employs the methods and technical of the Domain Engineering for development of IRLCOO (Intelligent Reusable Learning Components Object Oriented. IRLCOO are a special type of Sharable Content Object according to SCORM (Sharable Content Object Reusable Model. On the other hand, the instructional design pattern incorporates a mental model as the Conceptual Maps to transmit, build and generate appropriate knowledge to this educational environment type.

RAGE Architecture for Reusable Serious Gaming Technology Components

NARCIS (Netherlands)

Van der Vegt, Wim; Westera, Wim; Nyamsuren, Enkhbold; Georgiev, Atanas; Martinez Ortiz, Ivan

2016-01-01

For seizing the potential of serious games, the RAGE project - funded by the Horizon-2020 Programme of the European Commission - will make available an interoperable set of advanced technology components (software assets) that support game studios at serious game development. This paper describes

An OER Architecture Framework: Need and Design

Directory of Open Access Journals (Sweden)

Pankaj Khanna

2013-03-01

Full Text Available This paper describes an open educational resources (OER architecture framework that would bring significant improvements in a well-structured and systematic way to the educational practices of distance education institutions of India. The OER architecture framework is articulated with six dimensions: pedagogical, technological, managerial, academic, financial, and ethical. These dimensions are structured with the component areas of relevance: IT infrastructure services, management support systems, open content development and maintenance, online teaching-learning, and learner assessment and evaluation of the OER architecture framework. An OER knowledge and information base, including a web portal, is proposed in the form of a series of knowledge repositories. This system would not only streamline the delivery of distance education but also would enhance the quality of distance learning through the development of high quality e-content, instructional processes, course/programme content development, IT infrastructure, and network systems. Thus the proposed OER architecture framework when implemented in the distance education system (DES of India would improve the quality of distance education and also increase its accessibility in a well-organised and structured way.

Hybrid Power Management-Based Vehicle Architecture

Science.gov (United States)

Eichenberg, Dennis J.

2011-01-01

Hybrid Power Management (HPM) is the integration of diverse, state-of-the-art power devices in an optimal configuration for space and terrestrial applications (s ee figure). The appropriate application and control of the various power devices significantly improves overall system performance and efficiency. The basic vehicle architecture consists of a primary power source, and possibly other power sources, that provides all power to a common energy storage system that is used to power the drive motors and vehicle accessory systems. This architecture also provides power as an emergency power system. Each component is independent, permitting it to be optimized for its intended purpose. The key element of HPM is the energy storage system. All generated power is sent to the energy storage system, and all loads derive their power from that system. This can significantly reduce the power requirement of the primary power source, while increasing the vehicle reliability. Ultracapacitors are ideal for an HPM-based energy storage system due to their exceptionally long cycle life, high reliability, high efficiency, high power density, and excellent low-temperature performance. Multiple power sources and multiple loads are easily incorporated into an HPM-based vehicle. A gas turbine is a good primary power source because of its high efficiency, high power density, long life, high reliability, and ability to operate on a wide range of fuels. An HPM controller maintains optimal control over each vehicle component. This flexible operating system can be applied to all vehicles to considerably improve vehicle efficiency, reliability, safety, security, and performance. The HPM-based vehicle architecture has many advantages over conventional vehicle architectures. Ultracapacitors have a much longer cycle life than batteries, which greatly improves system reliability, reduces life-of-system costs, and reduces environmental impact as ultracapacitors will probably never need to be

Synthesis of conjugated polymers with complex architecture for photovoltaic applications

DEFF Research Database (Denmark)

Kiriy, Anton; Krebs, Frederik C

2017-01-01

A common approach to bulk heterojunction solar cells involves a “trialand- error” approach in finding optimal kinetically unstable morphologies. An alternative approach assumes the utilization of complex polymer architectures, such as donor–acceptor block copolymers. Because of a covalent preorga...... preorganization of the donor and acceptor components, these materials may form desirable morphologies at thermodynamic equilibrium. This chapter reviews synthetic approaches to such architectures and shows the first photovoltaic results....

Software Components and Formal Methods from a Computational Viewpoint

OpenAIRE

Lambertz, Christian

2012-01-01

Software components and the methodology of component-based development offer a promising approach to master the design complexity of huge software products because they separate the concerns of software architecture from individual component behavior and allow for reusability of components. In combination with formal methods, the specification of a formal component model of the later software product or system allows for establishing and verifying important system properties in an automatic a...

Advanced information processing system: The Army fault tolerant architecture conceptual study. Volume 2: Army fault tolerant architecture design and analysis

Science.gov (United States)

Harper, R. E.; Alger, L. S.; Babikyan, C. A.; Butler, B. P.; Friend, S. A.; Ganska, R. J.; Lala, J. H.; Masotto, T. K.; Meyer, A. J.; Morton, D. P.

1992-01-01

Described here is the Army Fault Tolerant Architecture (AFTA) hardware architecture and components and the operating system. The architectural and operational theory of the AFTA Fault Tolerant Data Bus is discussed. The test and maintenance strategy developed for use in fielded AFTA installations is presented. An approach to be used in reducing the probability of AFTA failure due to common mode faults is described. Analytical models for AFTA performance, reliability, availability, life cycle cost, weight, power, and volume are developed. An approach is presented for using VHSIC Hardware Description Language (VHDL) to describe and design AFTA's developmental hardware. A plan is described for verifying and validating key AFTA concepts during the Dem/Val phase. Analytical models and partial mission requirements are used to generate AFTA configurations for the TF/TA/NOE and Ground Vehicle missions.

Advanced router architectures

CERN Document Server

Kloth, Axel K

2005-01-01

Routers, switches, and transmission equipment form the backbone of the Internet, yet many users and service technicians do not understand how these nodes really work.Advanced Router Architectures addresses how components of advanced routers work together and how they are integrated with each other. This book provides the background behind why these building blocks perform certain functions, and how the function is implemented in general use. It offers an introduction to the subject matter that is intended to trigger deeper interest from the reader. The book explains, for example, why traffic m

The Impact of Basic Architectural Design

DEFF Research Database (Denmark)

Naboni, Emanuele; Malcangi, Antonio

2015-01-01

The research explores the impact of the shape, construction type, materials and components of buildings and users' scenarios – on buildings' key energy loads (heating, cooling and lighting) in Copenhagen's climate. Applying a genetic algorithm, a search space consisting of over 408,000 simulated ...... by proper basic design choices based on energy simulation coupled with genetic optimization. The Impact of Basic Architectural Design. Thinking beyond BR10 and Passivhaus Standard Prescriptions with the Use of Genetic Optimization (PDF Download Available). Available from: https......://www.researchgate.net/publication/287994281_The_Impact_of_Basic_Architectural_Design_Thinking_beyond_BR10_and_Passivhaus_Standard_Prescriptions_with_the_Use_of_Genetic_Optimization [accessed Jan 21, 2016]....

Augmenting interoperability across repositories architectural ideas

CERN Multimedia

CERN. Geneva

2005-01-01

The aDORe digital repository architecture designed and implemented by the Los Alamos Research Library is fully standards-based and highly modular, with the various components of the architecture interacting in a protocol-driven manner. Although aDORe was designed for use in the context of the Los Alamos Library, its modular and standards-based design has led to interesting insights regarding possible new levels of interoperability in a federation of heterogeneous repositories. The presentation will discuss these insights, and will illustrate that attractive federations of repositories can be built by introducing rather basic interoperability requirements. The presentation will also show that, once these requirements are met, a powerful service framework that overlays the federation can emerge.

Contemporary earthen architecture in the northern temperate climate

DEFF Research Database (Denmark)

Vestergaard, Inge; Eybye, Birgitte Tanderup

2017-01-01

houses designed using passive strategies and renewable materials have increased. Often the earth material, with its low environmental impact, is involved in the construction process. Building qualities include both pleasant living spaces and comfort in terms of better indoor climate. During the last few...... years new developments towards industrialized earthen building components can be seen. Hence the research question is: how can earth as a building material contribute to future Danish architecture? The results point out possible future developments in earthen architecture in Denmark. The methodologies...... and studying the applied materials and techniques....

Trust information-based privacy architecture for ubiquitous health.

Science.gov (United States)

Ruotsalainen, Pekka Sakari; Blobel, Bernd; Seppälä, Antto; Nykänen, Pirkko

2013-10-08

Ubiquitous health is defined as a dynamic network of interconnected systems that offers health services independent of time and location to a data subject (DS). The network takes place in open and unsecure information space. It is created and managed by the DS who sets rules that regulate the way personal health information is collected and used. Compared to health care, it is impossible in ubiquitous health to assume the existence of a priori trust between the DS and service providers and to produce privacy using static security services. In ubiquitous health features, business goals and regulations systems followed often remain unknown. Furthermore, health care-specific regulations do not rule the ways health data is processed and shared. To be successful, ubiquitous health requires novel privacy architecture. The goal of this study was to develop a privacy management architecture that helps the DS to create and dynamically manage the network and to maintain information privacy. The architecture should enable the DS to dynamically define service and system-specific rules that regulate the way subject data is processed. The architecture should provide to the DS reliable trust information about systems and assist in the formulation of privacy policies. Furthermore, the architecture should give feedback upon how systems follow the policies of DS and offer protection against privacy and trust threats existing in ubiquitous environments. A sequential method that combines methodologies used in system theory, systems engineering, requirement analysis, and system design was used in the study. In the first phase, principles, trust and privacy models, and viewpoints were selected. Thereafter, functional requirements and services were developed on the basis of a careful analysis of existing research published in journals and conference proceedings. Based on principles, models, and requirements, architectural components and their interconnections were developed using system

DAPNA: an architectural framework for data processing networks

NARCIS (Netherlands)

Sözer, Hasan; Nouta, Sander; Wombacher, Andreas; Perona, Paolo

2013-01-01

A data processing network is as a set of (software) components connected through communication channels to apply a series of operations on data. Realization and maintenance of large-scale data processing networks necessitate an architectural approach that supports analysis, verification,

Orthogonal transformations for change detection, Matlab code (ENVI-like headers)

DEFF Research Database (Denmark)

2007-01-01

Matlab code to do (iteratively reweighted) multivariate alteration detection (MAD) analysis, maximum autocorrelation factor (MAF) analysis, canonical correlation analysis (CCA) and principal component analysis (PCA) on image data; accommodates ENVI (like) header files.......Matlab code to do (iteratively reweighted) multivariate alteration detection (MAD) analysis, maximum autocorrelation factor (MAF) analysis, canonical correlation analysis (CCA) and principal component analysis (PCA) on image data; accommodates ENVI (like) header files....

Aquarius' Object-Oriented, Plug and Play Component-Based Flight Software

Science.gov (United States)

Murray, Alexander; Shahabuddin, Mohammad

2013-01-01

The Aquarius mission involves a combined radiometer and radar instrument in low-Earth orbit, providing monthly global maps of Sea Surface Salinity. Operating successfully in orbit since June, 2011, the spacecraft bus was furnished by the Argentine space agency, Comision Nacional de Actividades Espaciales (CONAE). The instrument, built jointly by NASA's Caltech/JPL and Goddard Space Flight Center, has been successfully producing expectation-exceeding data since it was powered on in August of 2011. In addition to the radiometer and scatterometer, the instrument contains an command & data-handling subsystem with a computer and flight software (FSW) that is responsible for managing the instrument, its operation, and its data. Aquarius' FSW is conceived and architected as a Component-based system, in which the running software consists of a set of Components, each playing a distinctive role in the subsystem, instantiated and connected together at runtime. Component architectures feature a well-defined set of interfaces between the Components, visible and analyzable at the architectural level (see [1]). As we will describe, this kind of an architecture offers significant advantages over more traditional FSW architectures, which often feature a monolithic runtime structure. Component-based software is enabled by Object-Oriented (OO) techniques and languages, the use of which again is not typical in space mission FSW. We will argue in this paper that the use of OO design methods and tools (especially the Unified Modeling Language), as well as the judicious usage of C++, are very well suited to FSW applications, and we will present Aquarius FSW, describing our methods, processes, and design, as a successful case in point.

A federated design for a neurobiological simulation engine: the CBI federated software architecture.

Directory of Open Access Journals (Sweden)

Hugo Cornelis

Full Text Available Simulator interoperability and extensibility has become a growing requirement in computational biology. To address this, we have developed a federated software architecture. It is federated by its union of independent disparate systems under a single cohesive view, provides interoperability through its capability to communicate, execute programs, or transfer data among different independent applications, and supports extensibility by enabling simulator expansion or enhancement without the need for major changes to system infrastructure. Historically, simulator interoperability has relied on development of declarative markup languages such as the neuron modeling language NeuroML, while simulator extension typically occurred through modification of existing functionality. The software architecture we describe here allows for both these approaches. However, it is designed to support alternative paradigms of interoperability and extensibility through the provision of logical relationships and defined application programming interfaces. They allow any appropriately configured component or software application to be incorporated into a simulator. The architecture defines independent functional modules that run stand-alone. They are arranged in logical layers that naturally correspond to the occurrence of high-level data (biological concepts versus low-level data (numerical values and distinguish data from control functions. The modular nature of the architecture and its independence from a given technology facilitates communication about similar concepts and functions for both users and developers. It provides several advantages for multiple independent contributions to software development. Importantly, these include: (1 Reduction in complexity of individual simulator components when compared to the complexity of a complete simulator, (2 Documentation of individual components in terms of their inputs and outputs, (3 Easy removal or replacement of

Modeling, analysis and optimization of network-on-chip communication architectures

CERN Document Server

Ogras, Umit Y

2013-01-01

Traditionally, design space exploration for Systems-on-Chip (SoCs) has focused on the computational aspects of the problem at hand. However, as the number of components on a single chip and their performance continue to increase, the communication architecture plays a major role in the area, performance and energy consumption of the overall system. As a result, a shift from computation-based to communication-based design becomes mandatory. Towards this end, network-on-chip (NoC) communication architectures have emerged recently as a promising alternative to classical bus and point-to-point communication architectures. This book explores outstanding research problems related to modeling, analysis and optimization of NoC communication architectures. More precisely, we present novel design methodologies, software tools and FPGA prototypes to aid the design of application-specific NoCs.

Technical architecture of ONC-approved plans for statewide health information exchange.

Science.gov (United States)

Barrows, Randolph C; Ezzard, John

2011-01-01

ONC-approved state plans for HIE were reviewed for descriptions and depictions of statewide HIE technical architecture. Review was complicated by non-standard organizational elements and technical terminology across state plans. Findings were mapped to industry standard, referenced, and defined HIE architecture descriptions and characteristics. Results are preliminary due to the initial subset of ONC-approved plans available, the rapid pace of new ONC-plan approvals, and continuing advancements in standards and technology of HIE, etc. Review of 28 state plans shows virtually all include a direct messaging component, but for participating entities at state-specific levels of granularity (RHIO, enterprise, organization/provider). About ½ of reviewed plans describe a federated architecture, and ¼ of plans utilize a single-vendor "hybrid-federated" architecture. About 1/3 of states plan to leverage new federal and open exchange technologies (DIRECT, CONNECT, etc.). Only one plan describes a centralized architecture for statewide HIE, but others combine central and federated architectural approaches.

Supervision and prognosis architecture based on dynamical classification method for the predictive maintenance of dynamical evolving systems

International Nuclear Information System (INIS)

Traore, M.; Chammas, A.; Duviella, E.

2015-01-01

In this paper, we are concerned by the improvement of the safety, availability and reliability of dynamical systems’ components subjected to slow degradations (slow drifts). We propose an architecture for efficient Predictive Maintenance (PM) according to the real time estimate of the future state of the components. The architecture is built on supervision and prognosis tools. The prognosis method is based on an appropriated supervision technique that consists in drift tracking of the dynamical systems using AUDyC (AUto-adaptive and Dynamical Clustering), that is an auto-adaptive dynamical classifier. Thus, due to the complexity and the dynamical of the considered systems, the Failure Mode Effect and Criticity Analysis (FMECA) is used to identify the key components of the systems. A component is defined as an element of the system that can be impacted by only one failure. A failure of a key component causes a long downtime of the system. From the FMECA, a Fault Tree Analysis (FTA) of the system are built to determine the propagation laws of a failure on the system by using a deductive method. The proposed architecture is implemented for the PM of a thermoregulator. The application on this real system highlights the interests and the performances of the proposed architecture

A task-based support architecture for developing point-of-care clinical decision support systems for the emergency department.

Science.gov (United States)

Wilk, S; Michalowski, W; O'Sullivan, D; Farion, K; Sayyad-Shirabad, J; Kuziemsky, C; Kukawka, B

2013-01-01

The purpose of this study was to create a task-based support architecture for developing clinical decision support systems (CDSSs) that assist physicians in making decisions at the point-of-care in the emergency department (ED). The backbone of the proposed architecture was established by a task-based emergency workflow model for a patient-physician encounter. The architecture was designed according to an agent-oriented paradigm. Specifically, we used the O-MaSE (Organization-based Multi-agent System Engineering) method that allows for iterative translation of functional requirements into architectural components (e.g., agents). The agent-oriented paradigm was extended with ontology-driven design to implement ontological models representing knowledge required by specific agents to operate. The task-based architecture allows for the creation of a CDSS that is aligned with the task-based emergency workflow model. It facilitates decoupling of executable components (agents) from embedded domain knowledge (ontological models), thus supporting their interoperability, sharing, and reuse. The generic architecture was implemented as a pilot system, MET3-AE--a CDSS to help with the management of pediatric asthma exacerbation in the ED. The system was evaluated in a hospital ED. The architecture allows for the creation of a CDSS that integrates support for all tasks from the task-based emergency workflow model, and interacts with hospital information systems. Proposed architecture also allows for reusing and sharing system components and knowledge across disease-specific CDSSs.

Determination of chromated copper arsenate (CCA) in treated wood of Eucalyptus

International Nuclear Information System (INIS)

Parreira, Paulo S.; Vendrametto, Guilherme R.; Cunha, Magda E.T.

2009-01-01

This work deals with the possible application of a portable energy dispersive handmade system (PXRF-LFNA-02) for the determination of Chromium, Copper and Arsenic in the preservative solution used to protect commercial wood of Eucalyptus, which are employed as wood fence, posts, contention fences, railroad sleepers, etc. It was prepared five body-of-proof made of eucalyptus alburnum with different concentrations for each element varying from 0.0061 to 0.0180 (g/g) for CrO 3 , 0.0024 to 0.0070 (g/g) for CuO and 0.0044 to 0.0129 (g/g) for As 2 O 5 . Four of them were used for calibration curves and one used as reference sample. It was used a commercial CCA (Chromated Copper Arsenate ) solution to prepare the samples. The results show a good linear regression between concentrations and X-rays intensities, after applied the multiple linear regression methodology for interelemental corrections. The values obtained with this methodology were 3.01(kg/m 3 ), 1.18 (kg/m 3 ) e 2.21 (kg/m 3 ) for CrO 3 , CuO and As 2 O 5 , respectively, while the nominal values are 2.90 (kg/m 3 ) for CrO 3 , 1.13 (kg/m 3 ) for CuO and 2.07 (kg/m 3 ) for As 2 O 5 . The ED-XRF (Energy Dispersive X-Rays Fluorescence) is a well established technique with high-speed of analytical procedure and its portable configuration allowing a multielemental, simultaneous and non destructive analyses besides in situ application. (author)

Biomedical laboratories: architecture and radioprotection principles

International Nuclear Information System (INIS)

Lapa, Renata

2005-01-01

In institutions where biological research are made and some technologies make use of radioisotope, the radiation protection is an issue of biosecurity for conceptual reasons. In the process of architectural design of Biomedical Laboratories, engineering and architecture reveal interfaces with other areas of knowledge and specific concepts. Exploring the role of architectural design in favor of personal and environmental protection in biological containment laboratories that handle non-sealed sources in research, the work discusses the triad that compose the principle of containment in health environments: best practices, protective equipment, physical facilities, with greater emphasis on the latter component. The shortcomings of the design process are reflected in construction and in use-operation and maintenance of these buildings, with direct consequences on the occupational health and safety, environmental and credibility of work processes. In this context, the importance of adoption of alternatives to improve the design process is confirmed, taking into account the early consideration of several variables involved and providing subsidies to the related laboratories . The research, conducted at FIOCRUZ - a Brazilian health institution, developed from the analysis of the participants in the architectural project, aiming at the formulation of design guidelines which could contribute to the rationalisation of this kind of building construction

Cost management and cross-functional communication through product architectures

NARCIS (Netherlands)

Zwerink, Ruud; Wouters, Marc; Hissel, Paul; Kerssens-van Drongelen, I.C.

2007-01-01

Product architecture decisions regarding, for example, product modularity, component commonality, and design re-use, are important for balancing costs, responsiveness, quality, and other important business objectives. Firms are challenged with complex tradeoffs between competing design priorities,

Component-Level Electronic-Assembly Repair (CLEAR) Operational Concept

Science.gov (United States)

Oeftering, Richard C.; Bradish, Martin A.; Juergens, Jeffrey R.; Lewis, Michael J.; Vrnak, Daniel R.

2011-01-01

This Component-Level Electronic-Assembly Repair (CLEAR) Operational Concept document was developed as a first step in developing the Component-Level Electronic-Assembly Repair (CLEAR) System Architecture (NASA/TM-2011-216956). The CLEAR operational concept defines how the system will be used by the Constellation Program and what needs it meets. The document creates scenarios for major elements of the CLEAR architecture. These scenarios are generic enough to apply to near-Earth, Moon, and Mars missions. The CLEAR operational concept involves basic assumptions about the overall program architecture and interactions with the CLEAR system architecture. The assumptions include spacecraft and operational constraints for near-Earth orbit, Moon, and Mars missions. This document addresses an incremental development strategy where capabilities evolve over time, but it is structured to prevent obsolescence. The approach minimizes flight hardware by exploiting Internet-like telecommunications that enables CLEAR capabilities to remain on Earth and to be uplinked as needed. To minimize crew time and operational cost, CLEAR exploits offline development and validation to support online teleoperations. Operational concept scenarios are developed for diagnostics, repair, and functional test operations. Many of the supporting functions defined in these operational scenarios are further defined as technologies in NASA/TM-2011-216956.

SME2EM: Smart mobile end-to-end monitoring architecture for life-long diseases.

Science.gov (United States)

Serhani, Mohamed Adel; Menshawy, Mohamed El; Benharref, Abdelghani

2016-01-01

Monitoring life-long diseases requires continuous measurements and recording of physical vital signs. Most of these diseases are manifested through unexpected and non-uniform occurrences and behaviors. It is impractical to keep patients in hospitals, health-care institutions, or even at home for long periods of time. Monitoring solutions based on smartphones combined with mobile sensors and wireless communication technologies are a potential candidate to support complete mobility-freedom, not only for patients, but also for physicians. However, existing monitoring architectures based on smartphones and modern communication technologies are not suitable to address some challenging issues, such as intensive and big data, resource constraints, data integration, and context awareness in an integrated framework. This manuscript provides a novel mobile-based end-to-end architecture for live monitoring and visualization of life-long diseases. The proposed architecture provides smartness features to cope with continuous monitoring, data explosion, dynamic adaptation, unlimited mobility, and constrained devices resources. The integration of the architecture׳s components provides information about diseases׳ recurrences as soon as they occur to expedite taking necessary actions, and thus prevent severe consequences. Our architecture system is formally model-checked to automatically verify its correctness against designers׳ desirable properties at design time. Its components are fully implemented as Web services with respect to the SOA architecture to be easy to deploy and integrate, and supported by Cloud infrastructure and services to allow high scalability, availability of processes and data being stored and exchanged. The architecture׳s applicability is evaluated through concrete experimental scenarios on monitoring and visualizing states of epileptic diseases. The obtained theoretical and experimental results are very promising and efficiently satisfy the proposed

A Centerless Circular Array Method: Extracting Maximal Information on Phase Velocities of Rayleigh Waves From Microtremor Records From a Simple Seismic Array

Science.gov (United States)

Cho, I.; Tada, T.; Shinozaki, Y.

2005-12-01

We have developed a Centerless Circular Array (CCA) method of microtremor exploration, an algorithm that enables to estimate phase velocities of Rayleigh waves by analyzing vertical-component records of microtremors that are obtained with an array of three or five seismic sensors placed around a circumference. Our CCA method shows a remarkably high performance in long-wavelength ranges because, unlike the frequency-wavenumber spectral method, our method does not resolve individual plane-wave components in the process of identifying phase velocities. Theoretical considerations predict that the resolving power of our CCA method in long-wavelength ranges depends upon the SN ratio, or the ratio of power of the propagating components to that of the non-propagating components (incoherent noise) contained in the records from the seismic array. The applicability of our CCA method to small-sized arrays on the order of several meters in radius has already been confirmed in our earlier work (Cho et al., 2004). We have deployed circular seismic arrays of different sizes at test sites in Japan where the underground structure is well documented through geophysical exploration, and have applied our CCA method to microtremor records to estimate phase velocities of Rayleigh waves. The estimates were then checked against "model" phase velocities that are derived from theoretical calculations. For arrays of 5, 25, 300 and 600 meters in radii, the estimated and model phase velocities demonstrated fine agreement within a broad wavelength range extending from a little larger than 3r (r: the array radius) up to at least 40r, 14r, 42r and 9r, respectively. This demonstrates the applicability of our CCA method to arrays on the order of several to several hundreds of meters in radii, and also illustrates, in a typical way, the markedly high performance of our CCA method in long-wavelength ranges. We have also invented a mathematical model that enables to evaluate the SN ratio in a given

A modular microfluidic architecture for integrated biochemical analysis.

Science.gov (United States)

Shaikh, Kashan A; Ryu, Kee Suk; Goluch, Edgar D; Nam, Jwa-Min; Liu, Juewen; Thaxton, C Shad; Chiesl, Thomas N; Barron, Annelise E; Lu, Yi; Mirkin, Chad A; Liu, Chang

2005-07-12

Microfluidic laboratory-on-a-chip (LOC) systems based on a modular architecture are presented. The architecture is conceptualized on two levels: a single-chip level and a multiple-chip module (MCM) system level. At the individual chip level, a multilayer approach segregates components belonging to two fundamental categories: passive fluidic components (channels and reaction chambers) and active electromechanical control structures (sensors and actuators). This distinction is explicitly made to simplify the development process and minimize cost. Components belonging to these two categories are built separately on different physical layers and can communicate fluidically via cross-layer interconnects. The chip that hosts the electromechanical control structures is called the microfluidic breadboard (FBB). A single LOC module is constructed by attaching a chip comprised of a custom arrangement of fluid routing channels and reactors (passive chip) to the FBB. Many different LOC functions can be achieved by using different passive chips on an FBB with a standard resource configuration. Multiple modules can be interconnected to form a larger LOC system (MCM level). We demonstrated the utility of this architecture by developing systems for two separate biochemical applications: one for detection of protein markers of cancer and another for detection of metal ions. In the first case, free prostate-specific antigen was detected at 500 aM concentration by using a nanoparticle-based bio-bar-code protocol on a parallel MCM system. In the second case, we used a DNAzyme-based biosensor to identify the presence of Pb(2+) (lead) at a sensitivity of 500 nM in <1 nl of solution.

Experiencing a Problem-Based Learning Approach for Teaching Reconfigurable Architecture Design

Directory of Open Access Journals (Sweden)

Erwan Fabiani

2009-01-01

Full Text Available This paper presents the “reconfigurable computing” teaching part of a computer science master course (first year on parallel architectures. The practical work sessions of this course rely on active pedagogy using problem-based learning, focused on designing a reconfigurable architecture for the implementation of an application class of image processing algorithms. We show how the successive steps of this project permit the student to experiment with several fundamental concepts of reconfigurable computing at different levels. Specific experiments include exploitation of architectural parallelism, dataflow and communicating component-based design, and configurability-specificity tradeoffs.

Requirements for e-Navigation Architectures

Directory of Open Access Journals (Sweden)

Axel Hahn

2016-12-01

Full Text Available Technology is changing the way of navigation. New technologies for communication and navigation can be found on virtually every vessel. System architectures define structure and cooperation of components and subsystems. IMO, IALA, costal authorities, technology provider and many more actually propose new architectures for e-Navigation. This paper looks at other transportation domains and technical as normative requirements for e-Navigation architectures. With the aim of identifying possible synergies in the research, development, certification and standardization, this paper sets out to compare requirements and approaches of these two domains with respect to safety and security aspects. Since from an autonomy perspective, the automotive domain has started earlier and therefore has achieved a higher degree of technical progress, we will start with an overview of the developments in this domain. After that, the paper discusses the requirements on automation and assistance systems in the maritime domain and gives an overview of the developments into this direction within the maritime domain. This then allows us to compare developments in both domains and to derive recommendations for further developments in the maritime domain at the end of this paper.

Elemental analysis of ash residue from combustion of CCA treated wood waste before and after electrodialytic extraction

DEFF Research Database (Denmark)

Pedersen, Anne Juul; Ottosen, Lisbeth M.

2006-01-01

Element distribution in a combined fly ash and bottom ash from combustion of copper chromate arsenate (CCA) treated wood waste was investigated by scanning electron microscopy (SEM/EDX) before and after electrodialytic extraction. The untreated ash contained various particles, including pieces...... of incompletely combusted wood rich in Cr and Ca, and irregular particles rich in Si, Al and K. Cr was also found incorporated in silica-based matrix particles. As was associated with Ca in porous (char) particles, indicating that Ca-arsenates had been formed during combustion. Cu was associated with Cr...... in the incompletely combusted wood pieces and was also found in almost pure form in a surface layer of some matrix particles – indicating surface condensation of volatile Cu species. In treated ash, Ca and As were no longer found together, indicating that Ca-arsenates had been dissolved due to the electrodialytic...

Architectural prototyping

DEFF Research Database (Denmark)

Bardram, Jakob Eyvind; Christensen, Henrik Bærbak; Hansen, Klaus Marius

2004-01-01

A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders...

An overview of an architecture proposal for a high energy physics Grid

CERN Document Server

Wäänänen, A; Konstantinov, A S; Kónya, B; Smirnova, O G

2002-01-01

The article gives an overview of a Grid testbed architecture proposal for the NorduGrid project. The aim of the project is to establish an inter-Nordic (Denmark, Norway, Sweden and Finland) testbed facility for implementation of wide area computing and data handling. The architecture is supposed to define a Grid system suitable for solving data intensive problems at the Large Hadron Collider at CERN. We present the various architecture components needed for such a system. After that we go on to give a description of the dynamics by showing the task flow. (12 refs).

Architectural communication: Intra and extra activity of architecture

Directory of Open Access Journals (Sweden)

Stamatović-Vučković Slavica

2013-01-01

Full Text Available Apart from a brief overview of architectural communication viewed from the standpoint of theory of information and semiotics, this paper contains two forms of dualistically viewed architectural communication. The duality denotation/connotation (”primary” and ”secondary” architectural communication is one of semiotic postulates taken from Umberto Eco who viewed architectural communication as a semiotic phenomenon. In addition, architectural communication can be viewed as an intra and an extra activity of architecture where the overall activity of the edifice performed through its spatial manifestation may be understood as an act of communication. In that respect, the activity may be perceived as the ”behavior of architecture”, which corresponds to Lefebvre’s production of space.

Comparative study on liquefaction of creosote and chromated copper arsenate (CCA)-treated wood and untreated southern pine wood: effects of acid catalyst content, liquefaction time, temperature, and phenol to wood ratio

Science.gov (United States)

Hui Pan; Chung-Yun Hse; Todd F. Shupe

2009-01-01

Creosote- and chromated copper arsenate (CCA)-treated wood waste and untreated southern pine wood were liquefied with phenol and sulfuric acid. The effects of sulfuric acid content, liquefaction time, liquefaction temperature, and phenol to wood ratio on liquefaction rate (i.e., wood residue content) were investigated and analyzed by analysis of variance (...

Nova control system: goals, architecture, and system design

International Nuclear Information System (INIS)

Suski, G.J.; Duffy, J.M.; Gritton, D.G.; Holloway, F.W.; Krammen, J.R.; Ozarski, R.G.; Severyn, J.R.; Van Arsdall, P.J.

1982-01-01

The control system for the Nova laser must operate reliably in a harsh pulse power environment and satisfy requirements of technical functionality, flexibility, maintainability and operability. It is composed of four fundamental subsystems: Power Conditioning, Alignment, Laser Diagnostics, and Target Diagnostics, together with a fifth, unifying subsystem called Central Controls. The system architecture utilizes a collection of distributed microcomputers, minicomputers, and components interconnected through high speed fiber optic communications systems. The design objectives, development strategy and architecture of the overall control system and each of its four fundamental subsystems are discussed. Specific hardware and software developments in several areas are also covered

An ODMG-compatible testbed architecture for scalable management and analysis of physics data

International Nuclear Information System (INIS)

Malon, D.M.; May, E.N.

1997-01-01

This paper describes a testbed architecture for the investigation and development of scalable approaches to the management and analysis of massive amounts of high energy physics data. The architecture has two components: an interface layer that is compliant with a substantial subset of the ODMG-93 Version 1.2 specification, and a lightweight object persistence manager that provides flexible storage and retrieval services on a variety of single- and multi-level storage architectures, and on a range of parallel and distributed computing platforms

Platform Architecture for Decentralized Positioning Systems

Directory of Open Access Journals (Sweden)

Zakaria Kasmi

2017-04-01

Full Text Available A platform architecture for positioning systems is essential for the realization of a flexible localization system, which interacts with other systems and supports various positioning technologies and algorithms. The decentralized processing of a position enables pushing the application-level knowledge into a mobile station and avoids the communication with a central unit such as a server or a base station. In addition, the calculation of the position on low-cost and resource-constrained devices presents a challenge due to the limited computing, storage capacity, as well as power supply. Therefore, we propose a platform architecture that enables the design of a system with the reusability of the components, extensibility (e.g., with other positioning technologies and interoperability. Furthermore, the position is computed on a low-cost device such as a microcontroller, which simultaneously performs additional tasks such as data collecting or preprocessing based on an operating system. The platform architecture is designed, implemented and evaluated on the basis of two positioning systems: a field strength system and a time of arrival-based positioning system.

Architectural freedom and industrialised architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

Architectural freedom and industrialized architecture. Inge Vestergaard, Associate Professor, Cand. Arch. Aarhus School of Architecture, Denmark Noerreport 20, 8000 Aarhus C Telephone +45 89 36 0000 E-mai l inge.vestergaard@aarch.dk Based on the repetitive architecture from the "building boom" 1960...... customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performed expression in direct relation to the given context. Through the last couple of years we have in Denmark been focusing a more sustainable and low energy building technique, which also include...... to the building physic problems a new industrialized period has started based on light weight elements basically made of wooden structures, faced with different suitable materials meant for individual expression for the specific housing area. It is the purpose of this article to widen up the different design...

D Digital Simulation of Minnan Temple Architecture CAISSON'S Craft Techniques

Science.gov (United States)

Lin, Y. C.; Wu, T. C.; Hsu, M. F.

2013-07-01

Caisson is one of the important representations of the Minnan (southern Fujian) temple architecture craft techniques and decorative aesthetics. The special component design and group building method present the architectural thinking and personal characteristics of great carpenters of Minnan temple architecture. In late Qing Dynasty, the appearance and style of caissons of famous temples in Taiwan apparently presented the building techniques of the great carpenters. However, as the years went by, the caisson design and craft techniques were not fully inherited, which has been a great loss of cultural assets. Accordingly, with the caisson of Fulong temple, a work by the well-known great carpenter in Tainan as an example, this study obtained the thinking principles of the original design and the design method at initial period of construction through interview records and the step of redrawing the "Tng-Ko" (traditional design, stakeout and construction tool). We obtained the 3D point cloud model of the caisson of Fulong temple using 3D laser scanning technology, and established the 3D digital model of each component of the caisson. Based on the caisson component procedure obtained from interview records, this study conducted the digital simulation of the caisson component to completely recode and present the caisson design, construction and completion procedure. This model of preserving the craft techniques for Minnan temple caisson by using digital technology makes specific contribution to the heritage of the craft techniques while providing an important reference for the digital preservation of human cultural assets.

Universal discrete Fourier optics RF photonic integrated circuit architecture.

Science.gov (United States)

Hall, Trevor J; Hasan, Mehedi

2016-04-04

This paper describes a coherent electro-optic circuit architecture that generates a frequency comb consisting of N spatially separated orders using a generalised Mach-Zenhder interferometer (MZI) with its N × 1 combiner replaced by an optical N × N Discrete Fourier Transform (DFT). Advantage may be taken of the tight optical path-length control, component and circuit symmetries and emerging trimming algorithms offered by photonic integration in any platform that offers linear electro-optic phase modulation such as LiNbO3, silicon, III-V or hybrid technology. The circuit architecture subsumes all MZI-based RF photonic circuit architectures in the prior art given an appropriate choice of output port(s) and dimension N although the principal application envisaged is phase correlated subcarrier generation for all optical orthogonal frequency division multiplexing. A transfer matrix approach is used to model the operation of the architecture. The predictions of the model are validated by simulations performed using an industry standard software tool. Implementation is found to be practical.

Challenges in the Development and Evolution of Secure Open Architecture Command and Control Systems (Briefing Charts)

Science.gov (United States)

2013-06-01

widgets for an OA system Design-time architecture: Browser, email, widget, DB, OS Go ogle Instance architecture: Chrome, Gmail, Google...provides functionally similar components or applications compatible with an OA system design Firefox Browser, WP, calendar Opera Instance...architecture: Firefox , AbiWord, Evolution, Fedora GPL Ab1Word Google Docs Instance ardlitecture: Fire fox, OR Google cal., Google Docs, Fedora

Study of heterogeneous and reconfigurable architectures in the communication domain

Science.gov (United States)

Feldkaemper, H. T.; Blume, H.; Noll, T. G.

2003-05-01

One of the most challenging design issues for next generations of (mobile) communication systems is fulfilling the computational demands while finding an appropriate trade-off between flexibility and implementation aspects, especially power consumption. Flexibility of modern architectures is desirable, e.g. concerning adaptation to new standards and reduction of time-to-market of a new product. Typical target architectures for future communication systems include embedded FPGAs, dedicated macros as well as programmable digital signal and control oriented processor cores as each of these has its specific advantages. These will be integrated as a System-on-Chip (SoC). For such a heterogeneous architecture a design space exploration and an appropriate partitioning plays a crucial role. On the exemplary vehicle of a Viterbi decoder as frequently used in communication systems we show which costs in terms of ATE complexity arise implementing typical components on different types of architecture blocks. A factor of about seven orders of magnitude spans between a physically optimised implementation and an implementation on a programmable DSP kernel. An implementation on an embedded FPGA kernel is in between these two representing an attractive compromise with high flexibility and low power consumption. Extending this comparison to further components, it is shown quantitatively that the cost ratio between different implementation alternatives is closely related to the operation to be performed. This information is essential for the appropriate partitioning of heterogeneous systems.

Video sensor architecture for surveillance applications.

Science.gov (United States)

Sánchez, Jordi; Benet, Ginés; Simó, José E

2012-01-01

This paper introduces a flexible hardware and software architecture for a smart video sensor. This sensor has been applied in a video surveillance application where some of these video sensors are deployed, constituting the sensory nodes of a distributed surveillance system. In this system, a video sensor node processes images locally in order to extract objects of interest, and classify them. The sensor node reports the processing results to other nodes in the cloud (a user or higher level software) in the form of an XML description. The hardware architecture of each sensor node has been developed using two DSP processors and an FPGA that controls, in a flexible way, the interconnection among processors and the image data flow. The developed node software is based on pluggable components and runs on a provided execution run-time. Some basic and application-specific software components have been developed, in particular: acquisition, segmentation, labeling, tracking, classification and feature extraction. Preliminary results demonstrate that the system can achieve up to 7.5 frames per second in the worst case, and the true positive rates in the classification of objects are better than 80%.

Video Sensor Architecture for Surveillance Applications

Directory of Open Access Journals (Sweden)

José E. Simó

2012-02-01

Full Text Available This paper introduces a flexible hardware and software architecture for a smart video sensor. This sensor has been applied in a video surveillance application where some of these video sensors are deployed, constituting the sensory nodes of a distributed surveillance system. In this system, a video sensor node processes images locally in order to extract objects of interest, and classify them. The sensor node reports the processing results to other nodes in the cloud (a user or higher level software in the form of an XML description. The hardware architecture of each sensor node has been developed using two DSP processors and an FPGA that controls, in a flexible way, the interconnection among processors and the image data flow. The developed node software is based on pluggable components and runs on a provided execution run-time. Some basic and application-specific software components have been developed, in particular: acquisition, segmentation, labeling, tracking, classification and feature extraction. Preliminary results demonstrate that the system can achieve up to 7.5 frames per second in the worst case, and the true positive rates in the classification of objects are better than 80%.

A review on DC/DC converter architectures for power fuel cell applications

International Nuclear Information System (INIS)

Kolli, Abdelfatah; Gaillard, Arnaud; De Bernardinis, Alexandre; Bethoux, Olivier; Hissel, Daniel; Khatir, Zoubir

2015-01-01

Highlights: • Different DC/DC power converter topologies for Fuel Cell systems are presented. • Advantages and drawbacks of the DC/DC power converter topologies are detailed. • Wide-BandGap semiconductors are attractive candidates for design of converters. • Wide-BandGap semiconductors improve efficiency and thermal limits of converters. • Different semiconductor technologies are assessed. - Abstract: Fuel cell-based power sources are attractive devices. Through multi-stack architecture, they offer flexibility, reliability, and efficiency. Keys to accessing the market are simplifying its architecture and each components. These include, among others, the power converter enabling the output voltage regulation. This article focuses on this specific component. The present paper gives a comprehensive overview of the power converter interfaces potentially favorable for the automotive, railways, aircrafts and small stationary domains. First, with respect to the strategic development of a modular design, it defines the specifications of a basic interface. Second, it inventories the best architecture opportunities with respect to these requirements. Based on this study, it fully designs a basic module and points out the outstanding contribution of the new developed silicon carbide switch technology. In conclusion, this review article exhibits the importance of choosing the right power converter architecture and the related technology. In this context it is highlighted that the output power interface can be efficient, compact and modular. In addition, its features enable a thermal compatibility with many ways of integrating this component in the global fuel cell based power source.

A proposed clinical decision support architecture capable of supporting whole genome sequence information.

Science.gov (United States)

Welch, Brandon M; Loya, Salvador Rodriguez; Eilbeck, Karen; Kawamoto, Kensaku

2014-04-04

Whole genome sequence (WGS) information may soon be widely available to help clinicians personalize the care and treatment of patients. However, considerable barriers exist, which may hinder the effective utilization of WGS information in a routine clinical care setting. Clinical decision support (CDS) offers a potential solution to overcome such barriers and to facilitate the effective use of WGS information in the clinic. However, genomic information is complex and will require significant considerations when developing CDS capabilities. As such, this manuscript lays out a conceptual framework for a CDS architecture designed to deliver WGS-guided CDS within the clinical workflow. To handle the complexity and breadth of WGS information, the proposed CDS framework leverages service-oriented capabilities and orchestrates the interaction of several independently-managed components. These independently-managed components include the genome variant knowledge base, the genome database, the CDS knowledge base, a CDS controller and the electronic health record (EHR). A key design feature is that genome data can be stored separately from the EHR. This paper describes in detail: (1) each component of the architecture; (2) the interaction of the components; and (3) how the architecture attempts to overcome the challenges associated with WGS information. We believe that service-oriented CDS capabilities will be essential to using WGS information for personalized medicine.

Enterprise architecture evaluation using architecture framework and UML stereotypes

Directory of Open Access Journals (Sweden)

Narges Shahi

2014-08-01

Full Text Available There is an increasing need for enterprise architecture in numerous organizations with complicated systems with various processes. Support for information technology, organizational units whose elements maintain complex relationships increases. Enterprise architecture is so effective that its non-use in organizations is regarded as their institutional inability in efficient information technology management. The enterprise architecture process generally consists of three phases including strategic programing of information technology, enterprise architecture programing and enterprise architecture implementation. Each phase must be implemented sequentially and one single flaw in each phase may result in a flaw in the whole architecture and, consequently, in extra costs and time. If a model is mapped for the issue and then it is evaluated before enterprise architecture implementation in the second phase, the possible flaws in implementation process are prevented. In this study, the processes of enterprise architecture are illustrated through UML diagrams, and the architecture is evaluated in programming phase through transforming the UML diagrams to Petri nets. The results indicate that the high costs of the implementation phase will be reduced.

Incorporation of Tenascin-C into the Extracellular Matrix by Periostin Underlies an Extracellular Meshwork Architecture*

OpenAIRE

Kii, Isao; Nishiyama, Takashi; Li, Minqi; Matsumoto, Ken-ichi; Saito, Mitsuru; Amizuka, Norio; Kudo, Akira

2009-01-01

Extracellular matrix (ECM) underlies a complicated multicellular architecture that is subjected to significant forces from mechanical environment. Although various components of the ECM have been enumerated, mechanisms that evolve the sophisticated ECM architecture remain to be addressed. Here we show that periostin, a matricellular protein, promotes incorporation of tenascin-C into the ECM and organizes a meshwork architecture of the ECM. We found that both periostin null mice and tenascin-C...

Tool Integration: Experiences and Issues in Using XMI and Component Technology

DEFF Research Database (Denmark)

Damm, Christian Heide; Hansen, Klaus Marius; Thomsen, Michael

2000-01-01

of conflicting data models, and provide architecture for doing so, based on component technology and XML Metadata Interchange. As an example, we discuss the implementation of an electronic whiteboard tool, Knight, which adds support for creative and collaborative object-oriented modeling to existing Computer-Aided...... Software Engineering through integration using our proposed architecture....

Lightweight enterprise architectures

CERN Document Server

Theuerkorn, Fenix

2004-01-01

STATE OF ARCHITECTUREArchitectural ChaosRelation of Technology and Architecture The Many Faces of Architecture The Scope of Enterprise Architecture The Need for Enterprise ArchitectureThe History of Architecture The Current Environment Standardization Barriers The Need for Lightweight Architecture in the EnterpriseThe Cost of TechnologyThe Benefits of Enterprise Architecture The Domains of Architecture The Gap between Business and ITWhere Does LEA Fit? LEA's FrameworkFrameworks, Methodologies, and Approaches The Framework of LEATypes of Methodologies Types of ApproachesActual System Environmen

Efficient Architecture for Spike Sorting in Reconfigurable Hardware

Science.gov (United States)

Hwang, Wen-Jyi; Lee, Wei-Hao; Lin, Shiow-Jyu; Lai, Sheng-Ying

2013-01-01

This paper presents a novel hardware architecture for fast spike sorting. The architecture is able to perform both the feature extraction and clustering in hardware. The generalized Hebbian algorithm (GHA) and fuzzy C-means (FCM) algorithm are used for feature extraction and clustering, respectively. The employment of GHA allows efficient computation of principal components for subsequent clustering operations. The FCM is able to achieve near optimal clustering for spike sorting. Its performance is insensitive to the selection of initial cluster centers. The hardware implementations of GHA and FCM feature low area costs and high throughput. In the GHA architecture, the computation of different weight vectors share the same circuit for lowering the area costs. Moreover, in the FCM hardware implementation, the usual iterative operations for updating the membership matrix and cluster centroid are merged into one single updating process to evade the large storage requirement. To show the effectiveness of the circuit, the proposed architecture is physically implemented by field programmable gate array (FPGA). It is embedded in a System-on-Chip (SOC) platform for performance measurement. Experimental results show that the proposed architecture is an efficient spike sorting design for attaining high classification correct rate and high speed computation. PMID:24189331

Efficient Architecture for Spike Sorting in Reconfigurable Hardware

Directory of Open Access Journals (Sweden)

Sheng-Ying Lai

2013-11-01

Full Text Available This paper presents a novel hardware architecture for fast spike sorting. The architecture is able to perform both the feature extraction and clustering in hardware. The generalized Hebbian algorithm (GHA and fuzzy C-means (FCM algorithm are used for feature extraction and clustering, respectively. The employment of GHA allows efficient computation of principal components for subsequent clustering operations. The FCM is able to achieve near optimal clustering for spike sorting. Its performance is insensitive to the selection of initial cluster centers. The hardware implementations of GHA and FCM feature low area costs and high throughput. In the GHA architecture, the computation of different weight vectors share the same circuit for lowering the area costs. Moreover, in the FCM hardware implementation, the usual iterative operations for updating the membership matrix and cluster centroid are merged into one single updating process to evade the large storage requirement. To show the effectiveness of the circuit, the proposed architecture is physically implemented by field programmable gate array (FPGA. It is embedded in a System-on-Chip (SOC platform for performance measurement. Experimental results show that the proposed architecture is an efficient spike sorting design for attaining high classification correct rate and high speed computation.

Coral identity underpins architectural complexity on Caribbean reefs.

Science.gov (United States)

Alvarez-Filip, Lorenzo; Dulvy, Nicholas K; Côte, Isabelle M; Watkinson, Andrew R; Gill, Jennifer A

2011-09-01

The architectural complexity of ecosystems can greatly influence their capacity to support biodiversity and deliver ecosystem services. Understanding the components underlying this complexity can aid the development of effective strategies for ecosystem conservation. Caribbean coral reefs support and protect millions of livelihoods, but recent anthropogenic change is shifting communities toward reefs dominated by stress-resistant coral species, which are often less architecturally complex. With the regionwide decline in reef fish abundance, it is becoming increasingly important to understand changes in coral reef community structure and function. We quantify the influence of coral composition, diversity, and morpho-functional traits on the architectural complexity of reefs across 91 sites at Cozumel, Mexico. Although reef architectural complexity increases with coral cover and species richness, it is highest on sites that are low in taxonomic evenness and dominated by morpho-functionally important, reef-building coral genera, particularly Montastraea. Sites with similar coral community composition also tend to occur on reefs with very similar architectural complexity, suggesting that reef structure tends to be determined by the same key species across sites. Our findings provide support for prioritizing and protecting particular reef types, especially those dominated by key reef-building corals, in order to enhance reef complexity.

Impaired activity of CCA-adding enzyme TRNT1 impacts OXPHOS complexes and cellular respiration in SIFD patient-derived fibroblasts.

Science.gov (United States)

Liwak-Muir, Urszula; Mamady, Hapsatou; Naas, Turaya; Wylie, Quinlan; McBride, Skye; Lines, Matthew; Michaud, Jean; Baird, Stephen D; Chakraborty, Pranesh K; Holcik, Martin

2016-06-18

SIFD (Sideroblastic anemia with B-cell immunodeficiency, periodic fevers, and developmental delay) is a novel form of congenital sideroblastic anemia associated with B-cell immunodeficiency, periodic fevers, and developmental delay caused by mutations in the CCA-adding enzyme TRNT1, but the precise molecular pathophysiology is not known. We show that the disease causing mutations in patient-derived fibroblasts do not affect subcellular localization of TRNT1 and show no gross morphological differences when compared to control cells. Analysis of cellular respiration and oxidative phosphorylation (OXPHOS) complexes demonstrates that both basal and maximal respiration rates are decreased in patient cells, which may be attributed to an observed decrease in the abundance of select proteins of the OXPHOS complexes. Our data provides further insight into cellular pathophysiology of SIFD.

Automated Improvement of Software Architecture Models for Performance and Other Quality Attributes

OpenAIRE

Koziolek, Anne

2013-01-01

Quality attributes, such as performance or reliability, are crucial for the success of a software system and largely influenced by the software architecture. Their quantitative prediction supports systematic, goal-oriented software design and forms a base of an engineering approach to software design. This thesis proposes a method and tool to automatically improve component-based software architecture (CBA) models based on such quantitative quality prediction techniques.

Indigenous architecture as a context-oriented architecture, a look at ...

African Journals Online (AJOL)

What has become problematic as the achievement of international style and globalization of architecture during the time has been the purely technological look at architecture, and the architecture without belonging to a place. In recent decades, the topic of sustainable architecture and reconsidering indigenous architecture ...

Dialogue management in a home machine environment : linguistic components over an agent architecture

OpenAIRE

Quesada Moreno, José Francisco; García, Federico; Sena Pichardo, María Esther; Bernal Bermejo, José Ángel; Amores Carredano, José Gabriel de

2001-01-01

This paper presents the main characteristics of an Agent-based Architecture for the design and implementation of a Spoken Dialogue System. From a theoretical point of view, the system is based on the Information State Update approach, in particular, the system aims at the management of Natural Command Language Dialogue Moves in a Home Machine Environment. Specifically, the paper is focused on the Natural Language Understanding and Dialogue Management Agents...

Architecture in the Islamic Civilization: Muslim Building or Islamic Architecture

OpenAIRE

Yassin, Ayat Ali; Utaberta, Dr. Nangkula

2012-01-01

The main problem of the theory in the arena of islamic architecture is affected by some of its Westernthoughts, and stereotyping the islamic architecture according to Western thoughts; this leads to the breakdownof the foundations in the islamic architecture. It is a myth that islamic architecture is subjected to theinfluence from foreign architectures. This paper will highlight the dialectical concept of islamic architecture ormuslim buildings and the areas of recognition in islamic architec...

Determination of chromated copper arsenate (CCA) in treated wood of Eucalyptus

Energy Technology Data Exchange (ETDEWEB)

Parreira, Paulo S., E-mail: parreira@uel.b [Universidade Estadual de Londrina (UEL), PR (Brazil). Dept. de Fisica. Lab.de Fisica Nuclear Aplicada; Vendrametto, Guilherme R.; Cunha, Magda E.T., E-mail: grvendrametto@gmail.co [Universidade Norte do Parana, Arapongas, PR (Brazil). Centro de Ciencias Humanas, da Saude, Exatas e Tecnologicas-A

2009-07-01

This work deals with the possible application of a portable energy dispersive handmade system (PXRF-LFNA-02) for the determination of Chromium, Copper and Arsenic in the preservative solution used to protect commercial wood of Eucalyptus, which are employed as wood fence, posts, contention fences, railroad sleepers, etc. It was prepared five body-of-proof made of eucalyptus alburnum with different concentrations for each element varying from 0.0061 to 0.0180 (g/g) for CrO{sub 3}, 0.0024 to 0.0070 (g/g) for CuO and 0.0044 to 0.0129 (g/g) for As{sub 2}O{sub 5}. Four of them were used for calibration curves and one used as reference sample. It was used a commercial CCA (Chromated Copper Arsenate ) solution to prepare the samples. The results show a good linear regression between concentrations and X-rays intensities, after applied the multiple linear regression methodology for interelemental corrections. The values obtained with this methodology were 3.01(kg/m{sup 3}), 1.18 (kg/m{sup 3}) e 2.21 (kg/m{sup 3}) for CrO{sub 3}, CuO and As{sub 2}O{sub 5}, respectively, while the nominal values are 2.90 (kg/m{sup 3}) for CrO{sub 3}, 1.13 (kg/m{sup 3}) for CuO and 2.07 (kg/m{sup 3}) for As{sub 2}O{sub 5}. The ED-XRF (Energy Dispersive X-Rays Fluorescence) is a well established technique with high-speed of analytical procedure and its portable configuration allowing a multielemental, simultaneous and non destructive analyses besides in situ application. (author)

Sensitivity Study on Availability of I&C Components Using Bayesian Network

Directory of Open Access Journals (Sweden)

Rahman Khalil Ur

2013-01-01

Full Text Available The objective of this study is to find out the impact of instrumentation and control (I&C components on the availability of I&C systems in terms of sensitivity analysis using Bayesian network. The analysis has been performed on I&C architecture of reactor protection system. The analysis results would be applied to develop I&C architecture which will meet the desire reliability features and save cost. RPS architecture unavailability P(x=0 and availability P(x=1 were estimated to 6.1276E-05 and 9.9994E-01 for failure (0 and perfect (1 states, respectively. The impact of I&C components on overall system risk has been studied in terms of risk achievement worth (RAW and risk reduction worth (RRW. It is found that circuit breaker failure (TCB, bi-stable processor (BP, sensor transmitter (TR, and pressure transmitter (PT have high impact on risk. The study concludes and recommends that circuit breaker bi-stable processor should be given more consideration while designing I&C architecture.

WDM packet switch architectures and analysis of the influence of tunable wavelength converters on the performance

DEFF Research Database (Denmark)

Danielsen, Søren Lykke; Mikkelsen, Benny; Jørgensen, Carsten

1997-01-01

A detailed analytical traffic model for a photonic wavelength division multiplexing (WDM) packet switch block is presented and the requirements to the buffer size is analyzed. Three different switch architectures are considered, each of them representing different complexities in terms of component.......e., the possibility of several outlets sharing the same physical buffer. For the three architectures presented here, a tradeoff in the buffer architectures is addressed: a buffer physically shared among an outlets requires many wavelengths internally in the switch block, whereas, architectures with buffers dedicated...

NDARC-NASA Design and Analysis of Rotorcraft Theoretical Basis and Architecture

Science.gov (United States)

Johnson, Wayne

2010-01-01

The theoretical basis and architecture of the conceptual design tool NDARC (NASA Design and Analysis of Rotorcraft) are described. The principal tasks of NDARC are to design (or size) a rotorcraft to satisfy specified design conditions and missions, and then analyze the performance of the aircraft for a set of off-design missions and point operating conditions. The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated. The aircraft attributes are obtained from the sum of the component attributes. NDARC provides a capability to model general rotorcraft configurations, and estimate the performance and attributes of advanced rotor concepts. The software has been implemented with low-fidelity models, typical of the conceptual design environment. Incorporation of higher-fidelity models will be possible, as the architecture of the code accommodates configuration flexibility, a hierarchy of models, and ultimately multidisciplinary design, analysis and optimization.

Software architecture analysis tool : software architecture metrics collection

NARCIS (Netherlands)

Muskens, J.; Chaudron, M.R.V.; Westgeest, R.

2002-01-01

The Software Engineering discipline lacks the ability to evaluate software architectures. Here we describe a tool for software architecture analysis that is based on metrics. Metrics can be used to detect possible problems and bottlenecks in software architectures. Even though metrics do not give a

AN ARCHITECTURAL APPROACH FOR QUALITY IMPROVING OF ANDROID APPLICATIONS DEVELOPMENT WHICH IMPLEMENTED TO COMMUNICATION APPLICATION FOR MECHATRONICS ROBOT LABORATORY ONAFT

Directory of Open Access Journals (Sweden)

V. Makarenko

2017-11-01

Full Text Available Developing a proper system architecture is a critical factor for the success of the project. After the analysisphase is complete, system design begins. For an effective solution developing it is very important that it will be flexible andscalable. During the system design, its component composition and development tools are determined. The system designphase is an opportunity to maximize the speed and effectiveness of subsequent development.There are quite a lot of architectural approaches for building systems. Despite their small differences, they have much incommon. They all define ways of splitting the application into separate layers. At the same time, in each system, at least, thereis a layer containing the business logic of the application, a layer of data interaction and a layer for displaying data.The "Clean Architecture" approach has been analyzed and adapted to the communication application for mechatronicsrobot laboratory developing. This approach allows to solve all the problems while building the application architecture: itmakes the code modular, tested and easily readable, and also positively affects the quality of development.New architectural components which was introduced by Google in 2017 was considered. The analysis showed that theArchitecture Components fit well into the concept and will interact with the "Clean Architecture" approach. Dagger 2framework was applied for a complete abstraction and simplify testing. Also, it is planned to implement the RxJava library.

High-Performance Monitoring Architecture for Large-Scale Distributed Systems Using Event Filtering

Science.gov (United States)

Maly, K.

1998-01-01

Monitoring is an essential process to observe and improve the reliability and the performance of large-scale distributed (LSD) systems. In an LSD environment, a large number of events is generated by the system components during its execution or interaction with external objects (e.g. users or processes). Monitoring such events is necessary for observing the run-time behavior of LSD systems and providing status information required for debugging, tuning and managing such applications. However, correlated events are generated concurrently and could be distributed in various locations in the applications environment which complicates the management decisions process and thereby makes monitoring LSD systems an intricate task. We propose a scalable high-performance monitoring architecture for LSD systems to detect and classify interesting local and global events and disseminate the monitoring information to the corresponding end- points management applications such as debugging and reactive control tools to improve the application performance and reliability. A large volume of events may be generated due to the extensive demands of the monitoring applications and the high interaction of LSD systems. The monitoring architecture employs a high-performance event filtering mechanism to efficiently process the large volume of event traffic generated by LSD systems and minimize the intrusiveness of the monitoring process by reducing the event traffic flow in the system and distributing the monitoring computation. Our architecture also supports dynamic and flexible reconfiguration of the monitoring mechanism via its Instrumentation and subscription components. As a case study, we show how our monitoring architecture can be utilized to improve the reliability and the performance of the Interactive Remote Instruction (IRI) system which is a large-scale distributed system for collaborative distance learning. The filtering mechanism represents an Intrinsic component integrated

A dynamical model for plant cell wall architecture formation.

NARCIS (Netherlands)

Mulder, B.M.; Emons, A.M.C.

2001-01-01

We discuss a dynamical mathematical model to explain cell wall architecture in plant cells. The highly regular textures observed in cell walls reflect the spatial organisation of the cellulose microfibrils (CMFs), the most important structural component of cell walls. Based on a geometrical theory

Integrating Branding Strategy Across Markets: Building International Brand Architecture

NARCIS (Netherlands)

Douglas, S.P.; Craig, S.; Nijssen, E.J.

2001-01-01

Brands play a critical role in establishing a firm’s visibility and position in international markets. Building a coherent international brand architecture is a key component of the firm’s overall international marketing strategy, because it provides a structure to leverage strong brands into other

Planning and Design Soa Architecture Blueprint

OpenAIRE

Tulenan, Virginia

2013-01-01

Service Oriented Architecture (SOA) is a framework for integrating business processes and supporting IT infrastructure as secure, standardized components-services-that can be reused and combined to address changing business priorities. Services are the building blocks of SOA and new applications can be constructed through consuming these services and orchestrating services within a business process. In SOA, services map to the business functions that are identified during business process ana...

Experience in-between architecture and context: the New Acropolis Museum, Athens

DEFF Research Database (Denmark)

Jakobsen, Annette Svaneklink

2012-01-01

This article is an introduction to how architecture’s context and conditions can be understood as signaletic with reference to Gilles Deleuze’s concept of the signaletic material. The understanding of architecture’s signaletic material addresses the process of becoming through the potentials...... of context and the requests towards function and programme, as well as through the methods for creating architecture - all seen as conditional components of a specific work of architecture and, consequently, as part of the signaletic material. A visit to the New Acropolis Museum is analysed to discuss how...... the potential of the in-between encounters of architecture, context and the experiencing subject can be part of the signaletic material and the process of becoming. This potential is actualised, for instance, in relation to the movement through the museum. The museum architecture affords experiences...

Execution Management in the Virtual Ship Architecture Issue 1.00

National Research Council Canada - National Science Library

Cramp, Anthony

2000-01-01

The Virtual Ship is an application of the High Level Architecture (HLA) in which simulation models that represent the components of a warship are brought together in a distributed manner to create a virtual representation of a warship...

Evolutionary Effect on the Embodied Beauty of Landscape Architectures.

Science.gov (United States)

Zhang, Wei; Tang, Xiaoxiang; He, Xianyou; Chen, Guangyao

2018-01-01

According to the framework of evolutionary aesthetics, a sense of beauty is related to environmental adaptation and plasticity of human beings, which has adaptive value and biological foundations. Prior studies have demonstrated that organisms derive benefits from the landscape. In this study, we investigated whether the benefits of landscape might elicit a stronger sense of beauty and what the nature of this sense of beauty is. In two experiments, when viewing classical landscape and nonlandscape architectures photographs, participants rated the aesthetic scores (Experiment 1) and had a two-alternative forced choice aesthetic judgment by pressing the reaction button located near to (15 cm) or far from (45 cm) the presenting stimuli (Experiment 2). The results showed that reaction of aesthetic ratings for classical landscape architectures was faster than those of classical nonlandscape architectures. Furthermore, only the reaction of beautiful judgment of classical landscape architecture photograph was significantly faster when the reaction button was in the near position to the presenting photograph than those in the position of far away from the presenting photograph. This finding suggests a facilitated effect for the aesthetic perception of classical landscape architectures due to their corresponding components including water and green plants with strong evolutionary implications. Furthermore, this sense of beauty for classical landscape architectures might be the embodied approach to beauty based on the viewpoint of evolutionary aesthetics and embodied cognition.

3D DIGITAL SIMULATION OF MINNAN TEMPLE ARCHITECTURE CAISSON'S CRAFT TECHNIQUES

Directory of Open Access Journals (Sweden)

Y. C. Lin

2013-07-01

Full Text Available Caisson is one of the important representations of the Minnan (southern Fujian temple architecture craft techniques and decorative aesthetics. The special component design and group building method present the architectural thinking and personal characteristics of great carpenters of Minnan temple architecture. In late Qing Dynasty, the appearance and style of caissons of famous temples in Taiwan apparently presented the building techniques of the great carpenters. However, as the years went by, the caisson design and craft techniques were not fully inherited, which has been a great loss of cultural assets. Accordingly, with the caisson of Fulong temple, a work by the well-known great carpenter in Tainan as an example, this study obtained the thinking principles of the original design and the design method at initial period of construction through interview records and the step of redrawing the "Tng-Ko" (traditional design, stakeout and construction tool. We obtained the 3D point cloud model of the caisson of Fulong temple using 3D laser scanning technology, and established the 3D digital model of each component of the caisson. Based on the caisson component procedure obtained from interview records, this study conducted the digital simulation of the caisson component to completely recode and present the caisson design, construction and completion procedure. This model of preserving the craft techniques for Minnan temple caisson by using digital technology makes specific contribution to the heritage of the craft techniques while providing an important reference for the digital preservation of human cultural assets.

Study of heterogeneous and reconfigurable architectures in the communication domain

Directory of Open Access Journals (Sweden)

H. T. Feldkaemper

2003-01-01

Full Text Available One of the most challenging design issues for next generations of (mobile communication systems is fulfilling the computational demands while finding an appropriate trade-off between flexibility and implementation aspects, especially power consumption. Flexibility of modern architectures is desirable, e.g. concerning adaptation to new standards and reduction of time-to-market of a new product. Typical target architectures for future communication systems include embedded FPGAs, dedicated macros as well as programmable digital signal and control oriented processor cores as each of these has its specific advantages. These will be integrated as a System-on-Chip (SoC. For such a heterogeneous architecture a design space exploration and an appropriate partitioning plays a crucial role. On the exemplary vehicle of a Viterbi decoder as frequently used in communication systems we show which costs in terms of ATE complexity arise implementing typical components on different types of architecture blocks. A factor of about seven orders of magnitude spans between a physically optimised implementation and an implementation on a programmable DSP kernel. An implementation on an embedded FPGA kernel is in between these two representing an attractive compromise with high flexibility and low power consumption. Extending this comparison to further components, it is shown quantitatively that the cost ratio between different implementation alternatives is closely related to the operation to be performed. This information is essential for the appropriate partitioning of heterogeneous systems.

Opinion on the examination of the control-command general architecture of the Flamanville 3 EPR reactor and of its associated platforms

International Nuclear Information System (INIS)

2009-06-01

This report first recalls the different technical and hardware elements and components discussed by the ISRN (Nuclear Radioprotection and Safety Institute) in front of the Expert Permanent Group for nuclear reactors. These elements and components are concerning the control-command architecture as a whole, and the technical ability of networks, computers, and robots. It outlines the main principles which the control-and-command must comply with: compliance of each component of the retained technological solution with the design requirements corresponding to the safety classification, robustness of the whole control-command architecture. Then, it comments and sometimes criticizes the status of the various components of the control-command platforms with respect to this compliance. Eight recommendations are given for the SPPA T2000 control-command platform and for the robustness of the control-command architecture

Reducing Development and Operations Costs using NASA's "GMSEC" Systems Architecture

Science.gov (United States)

Smith, Dan; Bristow, John; Crouse, Patrick

2007-01-01

This viewgraph presentation reviews the role of Goddard Mission Services Evolution Center (GMSEC) in reducing development and operation costs in handling the massive data from NASA missions. The goals of GMSEC systems architecture development are to (1) Simplify integration and development, (2)Facilitate technology infusion over time, (3) Support evolving operational concepts, and (4) All for mix of heritage, COTS and new components. First 3 missions (i.e., Tropical Rainforest Measuring Mission (TRMM), Small Explorer (SMEX) missions - SWAS, TRACE, SAMPEX, and ST5 3-Satellite Constellation System) each selected a different telemetry and command system. These results show that GMSEC's message-bus component-based framework architecture is well proven and provides significant benefits over traditional flight and ground data system designs. The missions benefit through increased set of product options, enhanced automation, lower cost and new mission-enabling operations concept options .

Multimedia architectures: from desktop systems to portable appliances

Science.gov (United States)

Bhaskaran, Vasudev; Konstantinides, Konstantinos; Natarajan, Balas R.

1997-01-01

Future desktop and portable computing systems will have as their core an integrated multimedia system. Such a system will seamlessly combine digital video, digital audio, computer animation, text, and graphics. Furthermore, such a system will allow for mixed-media creation, dissemination, and interactive access in real time. Multimedia architectures that need to support these functions have traditionally required special display and processing units for the different media types. This approach tends to be expensive and is inefficient in its use of silicon. Furthermore, such media-specific processing units are unable to cope with the fluid nature of the multimedia market wherein the needs and standards are changing and system manufacturers may demand a single component media engine across a range of products. This constraint has led to a shift towards providing a single-component multimedia specific computing engine that can be integrated easily within desktop systems, tethered consumer appliances, or portable appliances. In this paper, we review some of the recent architectural efforts in developing integrated media systems. We primarily focus on two efforts, namely the evolution of multimedia-capable general purpose processors and a more recent effort in developing single component mixed media co-processors. Design considerations that could facilitate the migration of these technologies to a portable integrated media system also are presented.

Open architecture design and approach for the Integrated Sensor Architecture (ISA)

Science.gov (United States)

Moulton, Christine L.; Krzywicki, Alan T.; Hepp, Jared J.; Harrell, John; Kogut, Michael

2015-05-01

Integrated Sensor Architecture (ISA) is designed in response to stovepiped integration approaches. The design, based on the principles of Service Oriented Architectures (SOA) and Open Architectures, addresses the problem of integration, and is not designed for specific sensors or systems. The use of SOA and Open Architecture approaches has led to a flexible, extensible architecture. Using these approaches, and supported with common data formats, open protocol specifications, and Department of Defense Architecture Framework (DoDAF) system architecture documents, an integration-focused architecture has been developed. ISA can help move the Department of Defense (DoD) from costly stovepipe solutions to a more cost-effective plug-and-play design to support interoperability.

A Proposed Clinical Decision Support Architecture Capable of Supporting Whole Genome Sequence Information

Directory of Open Access Journals (Sweden)

Brandon M. Welch

2014-04-01

Full Text Available Whole genome sequence (WGS information may soon be widely available to help clinicians personalize the care and treatment of patients. However, considerable barriers exist, which may hinder the effective utilization of WGS information in a routine clinical care setting. Clinical decision support (CDS offers a potential solution to overcome such barriers and to facilitate the effective use of WGS information in the clinic. However, genomic information is complex and will require significant considerations when developing CDS capabilities. As such, this manuscript lays out a conceptual framework for a CDS architecture designed to deliver WGS-guided CDS within the clinical workflow. To handle the complexity and breadth of WGS information, the proposed CDS framework leverages service-oriented capabilities and orchestrates the interaction of several independently-managed components. These independently-managed components include the genome variant knowledge base, the genome database, the CDS knowledge base, a CDS controller and the electronic health record (EHR. A key design feature is that genome data can be stored separately from the EHR. This paper describes in detail: (1 each component of the architecture; (2 the interaction of the components; and (3 how the architecture attempts to overcome the challenges associated with WGS information. We believe that service-oriented CDS capabilities will be essential to using WGS information for personalized medicine.

Healthy eating design guidelines for school architecture.

Science.gov (United States)

Huang, Terry T-K; Sorensen, Dina; Davis, Steven; Frerichs, Leah; Brittin, Jeri; Celentano, Joseph; Callahan, Kelly; Trowbridge, Matthew J

2013-01-01

We developed a new tool, Healthy Eating Design Guidelines for School Architecture, to provide practitioners in architecture and public health with a practical set of spatially organized and theory-based strategies for making school environments more conducive to learning about and practicing healthy eating by optimizing physical resources and learning spaces. The design guidelines, developed through multidisciplinary collaboration, cover 10 domains of the school food environment (eg, cafeteria, kitchen, garden) and 5 core healthy eating design principles. A school redesign project in Dillwyn, Virginia, used the tool to improve the schools' ability to adopt a healthy nutrition curriculum and promote healthy eating. The new tool, now in a pilot version, is expected to evolve as its components are tested and evaluated through public health and design research.

Multi-core System Architecture for Safety-critical Control Applications

DEFF Research Database (Denmark)

Li, Gang

and size, and high power consumption. Increasing the frequency of a processor is becoming painful now due to the explosive power consumption. Furthermore, components integrated into a single-core processor have to be certified to the highest SIL, due to that no isolation is provided in a traditional single...... certification cost. Meanwhile, hardware platforms with improved processing power are required to execute the applications of larger size. To tackle the two issues mentioned above, the state of the art approaches are using more Electronic Control Units (ECU) in a federated architecture or increasing......-core processor. A promising alternative to improve processing power and provide isolation is to adopt a multi-core architecture with on-chip isolation. In general, a specific multi-core architecture can facilitate the development and certification of safety-related systems, due to its physical isolation between...

THE SUSTAINABLE ARCHITECTURAL VALUES OF ECLECTIC STYLE SHOPHOUSES CASE STUDY: SUN YAT SEN MUSEUM PENANG, MALAYSIA

Directory of Open Access Journals (Sweden)

Akram Zwain

2017-07-01

Full Text Available The Sun Yat Sen shophouse in Penang is a small private Museum, which was converted from a shophouse or townhouse situated in the Armenian Street heritage area of George Town. The building is an example of embraces of the architectural heritage of George Town which is an extraordinarily beautiful example of Straits Settlements merchant's shophouse. Historically, it is associated with the global historical personality of Dr. Sun Yat Sen and his revolutionary. This city was added to the UNESCO's world heritage list in 2008 to acknowledge its rich cultural heritage that constitutes of unique architectural and cultural townscape along the Straits of Melaka. This paper investigates the architectural plan of a shophouse and the values of cultural heritage buildings which eventually was converted into a Museum in George Town, Penang. Classified as an eclectic style shophouse, it is rich in design and art components featured in its architecture that are still sustaining until today. This building has an interesting mixture of architectural and cultural inspirations adapted from the Chinese origin, with the local Malay ethnicity and the European influences that colonised the region. The introduction of new non related architectural components into the southern Chinese (eclectic style style in shophouses in George Town has resulted in the disappearance of this unique style of architecture. This investigation employs a qualitative research approach by documenting evidence and understanding the architectural as well as cultural influences of the southern Chinese eclectic style by studying the Sun Yat Sen Museum as a case study. The findings of the research point towards an understanding of the architectural and cultural influences that govern the design of the shophouse and its architectural character. Key words: sustainable architectural values, George Town, eclectic style, shophouses

Formation of metal agglomerates during carbonisation of chromated copper arsenate (CCA) treated wood waste: Comparison between a lab scale and an industrial plant

Energy Technology Data Exchange (ETDEWEB)

Helsen, Lieve [Katholieke Universiteit Leuven, Department of Mechanical Engineering, Division of Applied Mechanics and Energy Conversion, Celestijnenlaan 300A, B-3001 Leuven (Heverlee) (Belgium)]. E-mail: lieve.helsen@mech.kuleuven.be; Hacala, Amelie [Company Thermya, 1 rue Nicolas Appert, 33140 Villenave d' Ornon (France)]. E-mail: hacala@thermya.com

2006-10-11

This paper compares the results obtained by scanning electron microscopy coupled to X-ray analysis (SEM-EDXA) of the solid product after carbonisation of treated wood waste in a lab scale and in an industrial installation. These setups (lab scale and industrial) are characterized by different operating conditions of the carbonisation process. Moreover, the wood waste input to the processes differs significantly. From this study, it is clear that some similarities but also some differences exist between the lab scale study and the study with the industrial Chartherm plant. In both reactors, a metal (and mineral) agglomeration process takes place, even in the case of untreated wood. The agglomerates initially present in the wood input may serve as a seed for the metal agglomeration process during 'chartherisation'. The industrial setup leads to a broader range of agglomerates' size (0.1-50 {mu}m) and composition (all possible combinations of Cu, Cr, As and wood minerals). Some agglomerates contain the three metals but the major part is a combination of wood minerals and one or two of the three preservative metals, while all agglomerates analysed in the lab scale product contain the three metals. The separate influence of wood input characteristics and process conditions cannot be derived from these experiments, but the observations suggest that the higher the CCA retention in the wood input is, the easier is the metal agglomeration process during chartherisation of CCA treated wood waste. From the analyses performed in this study it seems that copper behaves differently in the sense that it agglomerates easily, but the resulting particles are small (<1 {mu}m)

Formation of metal agglomerates during carbonisation of chromated copper arsenate (CCA) treated wood waste: Comparison between a lab scale and an industrial plant

International Nuclear Information System (INIS)

Helsen, Lieve; Hacala, Amelie

2006-01-01

This paper compares the results obtained by scanning electron microscopy coupled to X-ray analysis (SEM-EDXA) of the solid product after carbonisation of treated wood waste in a lab scale and in an industrial installation. These setups (lab scale and industrial) are characterized by different operating conditions of the carbonisation process. Moreover, the wood waste input to the processes differs significantly. From this study, it is clear that some similarities but also some differences exist between the lab scale study and the study with the industrial Chartherm plant. In both reactors, a metal (and mineral) agglomeration process takes place, even in the case of untreated wood. The agglomerates initially present in the wood input may serve as a seed for the metal agglomeration process during 'chartherisation'. The industrial setup leads to a broader range of agglomerates' size (0.1-50 μm) and composition (all possible combinations of Cu, Cr, As and wood minerals). Some agglomerates contain the three metals but the major part is a combination of wood minerals and one or two of the three preservative metals, while all agglomerates analysed in the lab scale product contain the three metals. The separate influence of wood input characteristics and process conditions cannot be derived from these experiments, but the observations suggest that the higher the CCA retention in the wood input is, the easier is the metal agglomeration process during chartherisation of CCA treated wood waste. From the analyses performed in this study it seems that copper behaves differently in the sense that it agglomerates easily, but the resulting particles are small (<1 μm)

Analysis of Architecture Pattern Usage in Legacy System Architecture Documentation

NARCIS (Netherlands)

Harrison, Neil B.; Avgeriou, Paris

2008-01-01

Architecture patterns are an important tool in architectural design. However, while many architecture patterns have been identified, there is little in-depth understanding of their actual use in software architectures. For instance, there is no overview of how many patterns are used per system or

Designing a database for performance assessment: Lessons learned from WIPP

International Nuclear Information System (INIS)

Martell, M.A.; Schenker, A.

1997-01-01

The Waste Isolation Pilot Plant (WIPP) Compliance Certification Application (CCA) Performance Assessment (PA) used a relational database that was originally designed only to supply the input parameters required for implementation of the PA codes. Reviewers used the database as a point of entry to audit quality assurance measures for control, traceability, and retrievability of input information used for analysis, and output/work products. During these audits it became apparent that modifications to the architecture and scope of the database would benefit the EPA regulator and other stakeholders when reviewing the recertification application. This paper contains a discussion of the WPP PA CCA database and lessons learned for designing a database

On the Architectural Engineering Competences in Architectural Design

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning

2007-01-01

In 1997 a new education in Architecture & Design at Department of Architecture and Design, Aalborg University was started with 50 students. During the recent years this number has increased to approximately 100 new students each year, i.e. approximately 500 students are following the 3 years...... bachelor (BSc) and the 2 years master (MSc) programme. The first 5 semesters are common for all students followed by 5 semesters with specialization into Architectural Design, Urban Design, Industrial Design or Digital Design. The present paper gives a short summary of the architectural engineering...

Information Architecture without Internal Theory: An Inductive Design Process.

Science.gov (United States)

Haverty, Marsha

2002-01-01

Suggests that information architecture design is primarily an inductive process, partly because it lacks internal theory and partly because it is an activity that supports emergent phenomena (user experiences) from basic design components. Suggests a resemblance to Constructive Induction, a design process that locates the best representational…

Determination of the distribution of copper and chromium in partly remediated CCA-treated pine wood using SEM and EDX analyses

DEFF Research Database (Denmark)

Christensen, Iben Vernegren; Ottosen, Lisbeth M.; Melcher, Eckhard

2005-01-01

. After soaking, a small amount of Cu and Cr was still present in the cell walls but larger particles were now found on wall surfaces. Most effective removal of Cu was obtained after soaking in phosphoric and oxalic acid followed by EDR; here numerous rice grain-shaped particles were observed containing...... large amounts of Cu and no Cr. Cr was most effectively removed after soaking in oxalic acid and subsequent EDR treatment or dual soaking in phosphoric acid and oxalic acid with and without subsequent EDR.......Soaking in different acids and electrodialytic remediation (EDR) were applied for removing copper and chromium from freshly Chromated Copper Arsenate (CCA) impregnated EN 113 pine wood samples. After remedial treatments, AAS analyses revealed that the concentration of copper (Cu) and chromium (Cr...

Copper tolerance of brown-rot fungi : oxalic acid production in southern pine treated with arsenic-free preservatives

Science.gov (United States)

Frederick Green; Carol A. Clausen

2005-01-01

The voluntary withdrawal of chromated copper arsenate (CCA)-treated wood from most residential applications has increased the use of non-arsenical copper-based organic wood preservatives. Because the arsenic component of CCA controlled copper tolerant fungi, scientists have renewed interest in and concern about the decay capacity in the important copper-tolerant group...

Behavior Protocols for Software Components

Czech Academy of Sciences Publication Activity Database

Plášil, František; Višňovský, Stanislav

2002-01-01

Roč. 28, č. 11 (2002), s. 1056-1076 ISSN 0098-5589 R&D Projects: GA AV ČR IAA2030902; GA ČR GA201/99/0244 Grant - others:Eureka(XE) Pepita project no.2033 Institutional research plan: AV0Z1030915 Keywords : behavior protocols * component-based programming * software architecture Subject RIV: JC - Computer Hardware ; Software Impact factor: 1.170, year: 2002

Connecting Architecture and Implementation

Science.gov (United States)

Buchgeher, Georg; Weinreich, Rainer

Software architectures are still typically defined and described independently from implementation. To avoid architectural erosion and drift, architectural representation needs to be continuously updated and synchronized with system implementation. Existing approaches for architecture representation like informal architecture documentation, UML diagrams, and Architecture Description Languages (ADLs) provide only limited support for connecting architecture descriptions and implementations. Architecture management tools like Lattix, SonarJ, and Sotoarc and UML-tools tackle this problem by extracting architecture information directly from code. This approach works for low-level architectural abstractions like classes and interfaces in object-oriented systems but fails to support architectural abstractions not found in programming languages. In this paper we present an approach for linking and continuously synchronizing a formalized architecture representation to an implementation. The approach is a synthesis of functionality provided by code-centric architecture management and UML tools and higher-level architecture analysis approaches like ADLs.

ARCHITECTURAL PLACEMAKING OF TECHNOLOGY PARKS: ENCOURAGEMENT OF CREATIVE THINKING

Directory of Open Access Journals (Sweden)

Rykov Kirill Nikolaevich

2012-10-01

Full Text Available The present-day postindustrial or information-oriented society features an ever growing role of creative and intellectual abilities. This trend facilitates transformation of the workforce, as the portion of manual labor is reduced, while the one of intellectual labor goes up. As a result, architectural placemaking has to meet the new requirements driven by the specific nature of social and physiological constituents of the headwork. The aim of the article is the identification of new challenges that the high-quality architecture has to meet in its efforts to service the intellectual labour environment. For illustrative purposes, the author has chosen research and technology parks as the most typical postindustrial facilities. According to the author, intellectual constituents of the architectural practice represent systematic and research components. This division is the result of the analysis of research and technology parks. The author has made an attempt to identify special conditions of effective creativity in architectural practice. They include comfort, availability, information system development, calm, sociality, significance and variability. The list of conditions and general methods of their implementation presented by the author can be used in a wide range of project goals connected with the architectural design of research and technology parks and stimulation of creative potential of the people involved.

An agent architecture with on-line learning of both procedural and declarative knowledge

Energy Technology Data Exchange (ETDEWEB)

Sun, R.; Peterson, T.; Merrill, E. [Univ. of Alabama, Tuscaloosa, AL (United States)

1996-12-31

In order to develop versatile cognitive agents that learn in situated contexts and generalize resulting knowledge to different environments, we explore the possibility of learning both declarative and procedural knowledge in a hybrid connectionist architecture. The architecture is based on the two-level idea proposed earlier by the author. Declarative knowledge is represented symbolically, while procedural knowledge is represented subsymbolically. The architecture integrates reactive procedures, rules, learning, and decision-making in a unified framework, and structures different learning components (including Q-learning and rule induction) in a synergistic way to perform on-line and integrated learning.

Virtual Business Operating Environment in the Cloud: Conceptual Architecture and Challenges

Science.gov (United States)

Nezhad, Hamid R. Motahari; Stephenson, Bryan; Singhal, Sharad; Castellanos, Malu

Advances in service oriented architecture (SOA) have brought us close to the once imaginary vision of establishing and running a virtual business, a business in which most or all of its business functions are outsourced to online services. Cloud computing offers a realization of SOA in which IT resources are offered as services that are more affordable, flexible and attractive to businesses. In this paper, we briefly study advances in cloud computing, and discuss the benefits of using cloud services for businesses and trade-offs that they have to consider. We then present 1) a layered architecture for the virtual business, and 2) a conceptual architecture for a virtual business operating environment. We discuss the opportunities and research challenges that are ahead of us in realizing the technical components of this conceptual architecture. We conclude by giving the outlook and impact of cloud services on both large and small businesses.

Peptidoglycan architecture of Gram-positive bacteria by solid-state NMR.

Science.gov (United States)

Kim, Sung Joon; Chang, James; Singh, Manmilan

2015-01-01

Peptidoglycan is an essential component of cell wall in Gram-positive bacteria with unknown architecture. In this review, we summarize solid-state NMR approaches to address some of the unknowns in the Gram-positive bacteria peptidoglycan architecture: 1) peptidoglycan backbone conformation, 2) PG-lattice structure, 3) variations in the peptidoglycan architecture and composition, 4) the effects of peptidoglycan bridge-length on the peptidoglycan architecture in Fem mutants, 5) the orientation of glycan strands with respect to the membrane, and 6) the relationship between the peptidoglycan structure and the glycopeptide antibiotic mode of action. Solid-state NMR analyses of Staphylococcus aureus cell wall show that peptidoglycan chains are surprisingly ordered and densely packed. The peptidoglycan disaccharide backbone adopts 4-fold screw helical symmetry with the disaccharide unit periodicity of 40Å. Peptidoglycan lattice in the S. aureus cell wall is formed by cross-linked PG stems that have parallel orientations. The structural characterization of Fem-mutants of S. aureus with varying lengths of bridge structures suggests that the PG-bridge length is an important determining factor for the PG architecture. Copyright © 2014 Elsevier B.V. All rights reserved.

How organisation of architecture documentation affects architectural knowledge retrieval

NARCIS (Netherlands)

de Graaf, K.A.; Liang, P.; Tang, A.; Vliet, J.C.

A common approach to software architecture documentation in industry projects is the use of file-based documents. This approach offers a single-dimensional arrangement of the architectural knowledge. Knowledge retrieval from file-based architecture documentation is efficient if the organisation of

The implementation of common object request broker architecture (CORBA) for controlling robot arm via web

International Nuclear Information System (INIS)

Syed Mahamad Zuhdi Amin; Mohd Yazid Idris; Wan Mohd Nasir Wan Kadir

2001-01-01

This paper presents the employment of the Common Object Request Broker Architecture (CORBA) technology in the implementation of our distributed Arm Robot Controller (ARC). CORBA is an industrial standard architecture based on distributed abstract object model, which is developed by Object Management Group (OMG). The architecture consists of five components i.e. Object Request Broker (ORB), Interface Definition Language (IDL), Dynamic Invocation Interface (DII), Interface Repositories (IR) and Object adapter (OA). CORBA objects are different from typical programming objects in three ways i.e. they can be executed on any platform, located anywhere on the network and written in any language that supports IDL mapping. In the implementation of the system, 5 degree of freedom (DOF) arm robot RCS 6.0 and Java as a programming mapping to the CORBA IDL. By implementing this architecture, the objects in the server machine can be distributed over the network in order to run the controller. the ultimate goal for our ARC system is to demonstrate concurrent execution of multiple arm robots through multiple instantiations of distributed object components. (Author)

Towards a preliminary design of the ITER plasma control system architecture

International Nuclear Information System (INIS)

Treutterer, W.; Rapson, C.J.; Raupp, G.; Snipes, J.; Vries, P. de; Winter, A.; Humphreys, D.A.; Walker, M.; Tommasi, G. de; Cinque, M.; Bremond, S.; Moreau, P.; Nouailletas, R.; Felton, R.

2017-01-01

Highlights: • ITER control requirements and use scenarios for initial plasma operation have been analysed. • Basic choices from conceptual design could be confirmed. • Architectural design considers dynamic structure changes. • All PCS components are integrated in an exception handling hierarchy. - Abstract: Design of the ITER plasma control system is proceeding towards its next – preliminary design – stage. During the conceptual design in 2013 an overall assessment of high-level control tasks and their relationships has been conducted. The goal of the preliminary design is to show, that a reasonable implementation of the proposed concepts exists which fulfills the high-level requirements and is suitable for realistic use cases. This verification is conducted with focus on the concrete use cases of early operation and first plasma, since these phases are mandatory for ITER startup. In particular, detailed control requirements and functions for commissioning and first plasma operation including breakdown, burn-through and ramp-up in L-mode, as well as for planned or exceptional shutdown are identified. Control functions related to those operational phases and the underlying control system architecture are modeled. The goal is to check whether the flexibility of the conceptual architectural approach is adequate also in consideration of the more elaborate definitions for control functions and their interactions. In addition, architecture shall already be prepared for extension to H-mode operation and burn-control, even if the related control functions are only roughly defined at the moment. As a consequence, the architectural design is amended where necessary and converted into base components and infrastructure services allowing to deploy control and exception handling algorithms for the concrete first-plasma operation.

Towards a preliminary design of the ITER plasma control system architecture

Energy Technology Data Exchange (ETDEWEB)

Treutterer, W., E-mail: Wolfgang.Treutterer@ipp.mpg.de [Max-Planck-Institut für Plasmaphysik, Boltzmannstraße 2, 85748 Garching (Germany); Rapson, C.J.; Raupp, G. [Max-Planck-Institut für Plasmaphysik, Boltzmannstraße 2, 85748 Garching (Germany); Snipes, J.; Vries, P. de; Winter, A. [ITER Organization, Route de Vinon sur Verdon, 13067 St Paul Lez Durance (France); Humphreys, D.A.; Walker, M. [General Atomics, PO Box 85608, San Diego, CA 92186-5608 (United States); Tommasi, G. de; Cinque, M. [CREATE/Università di Napoli Federico II, Napoli (Italy); Bremond, S.; Moreau, P.; Nouailletas, R. [Association CEA pour la Fusion Contrôlée, CEA Cadarache, 13108 St Paul les Durance (France); Felton, R. [CCFE Fusion Association, Culham Centre for Fusion Energy, Culham Science Centre, Oxfordshire, OX14 3DB (United Kingdom)

2017-02-15

Highlights: • ITER control requirements and use scenarios for initial plasma operation have been analysed. • Basic choices from conceptual design could be confirmed. • Architectural design considers dynamic structure changes. • All PCS components are integrated in an exception handling hierarchy. - Abstract: Design of the ITER plasma control system is proceeding towards its next – preliminary design – stage. During the conceptual design in 2013 an overall assessment of high-level control tasks and their relationships has been conducted. The goal of the preliminary design is to show, that a reasonable implementation of the proposed concepts exists which fulfills the high-level requirements and is suitable for realistic use cases. This verification is conducted with focus on the concrete use cases of early operation and first plasma, since these phases are mandatory for ITER startup. In particular, detailed control requirements and functions for commissioning and first plasma operation including breakdown, burn-through and ramp-up in L-mode, as well as for planned or exceptional shutdown are identified. Control functions related to those operational phases and the underlying control system architecture are modeled. The goal is to check whether the flexibility of the conceptual architectural approach is adequate also in consideration of the more elaborate definitions for control functions and their interactions. In addition, architecture shall already be prepared for extension to H-mode operation and burn-control, even if the related control functions are only roughly defined at the moment. As a consequence, the architectural design is amended where necessary and converted into base components and infrastructure services allowing to deploy control and exception handling algorithms for the concrete first-plasma operation.

Influence of the main components of an electric-powered vehicle on its E/E architecture; Einfluss der Hauptkomponenten eines elektrischen Fahrzeugs auf seine E/E Architektur

Energy Technology Data Exchange (ETDEWEB)

Wagemann, Rolf; Holzmann, Frederic; Hack, Christine; Wagner, Gunnar [Intedis GmbH und Co.KG, Wuerzburg (Germany)

2010-07-01

The diminution of energy resources and the increase of CO{sub 2} emissions are high motivation for the willingness for developing electric vehicles. That is why we can see currently a huge range of vehicle concepts starting from different hybrids up to full electric vehicles with different performances. Electric driveline is already established in production and railway transportation but did not play a huge role in the vehicle transportation until today. Thus a significant jump transfer from energy technology to the world of vehicles has to done and to comply with the typical safety and reliability requirements of that domain. Beside the possibility to reach the zero emission targets, the new vehicle platform provides new innovation spectrum for vehicle construction. The E/E architecture is the core part of the vehicle platform by bringing together the new components and functions. Hereby the architecture has to provide a safe and convenient integration platform to the new technologies. A developing process, established at Intedis, starting with the definition fo safety and reliability requirements in parallel to general behavior and simulation of virtual proto-types ensures to achieve goal. (orig.)

Capital Architecture: Situating symbolism parallel to architectural methods and technology

Science.gov (United States)

Daoud, Bassam

Capital Architecture is a symbol of a nation's global presence and the cultural and social focal point of its inhabitants. Since the advent of High-Modernism in Western cities, and subsequently decolonised capitals, civic architecture no longer seems to be strictly grounded in the philosophy that national buildings shape the legacy of government and the way a nation is regarded through its built environment. Amidst an exceedingly globalized architectural practice and with the growing concern of key heritage foundations over the shortcomings of international modernism in representing its immediate socio-cultural context, the contextualization of public architecture within its sociological, cultural and economic framework in capital cities became the key denominator of this thesis. Civic architecture in capital cities is essential to confront the challenges of symbolizing a nation and demonstrating the legitimacy of the government'. In today's dominantly secular Western societies, governmental architecture, especially where the seat of political power lies, is the ultimate form of architectural expression in conveying a sense of identity and underlining a nation's status. Departing with these convictions, this thesis investigates the embodied symbolic power, the representative capacity, and the inherent permanence in contemporary architecture, and in its modes of production. Through a vast study on Modern architectural ideals and heritage -- in parallel to methodologies -- the thesis stimulates the future of large scale governmental building practices and aims to identify and index the key constituents that may respond to the lack representation in civic architecture in capital cities.

Software architecture evolution

DEFF Research Database (Denmark)

Barais, Olivier; Le Meur, Anne-Francoise; Duchien, Laurence

2008-01-01

Software architectures must frequently evolve to cope with changing requirements, and this evolution often implies integrating new concerns. Unfortunately, when the new concerns are crosscutting, existing architecture description languages provide little or no support for this kind of evolution....... The software architect must modify multiple elements of the architecture manually, which risks introducing inconsistencies. This chapter provides an overview, comparison and detailed treatment of the various state-of-the-art approaches to describing and evolving software architectures. Furthermore, we discuss...... one particular framework named Tran SAT, which addresses the above problems of software architecture evolution. Tran SAT provides a new element in the software architecture descriptions language, called an architectural aspect, for describing new concerns and their integration into an existing...

Architectural design decisions

NARCIS (Netherlands)

Jansen, Antonius Gradus Johannes

2008-01-01

A software architecture can be considered as the collection of key decisions concerning the design of the software of a system. Knowledge about this design, i.e. architectural knowledge, is key for understanding a software architecture and thus the software itself. Architectural knowledge is mostly

Non-structural Components influencing Hospital Disaster Preparedness in Malaysia

Science.gov (United States)

Samsuddin, N. M.; Takim, R.; Nawawi, A. H.; Rosman, M. R.; SyedAlwee, S. N. A.

2018-04-01

Hospital disaster preparedness refers to measures taken by the hospital’s stakeholders to prepare, reduce the effects of disaster and ensure effective coordination during incident response. Among the measures, non-structural components (i.e., medical laboratory equipment & supplies; architectural; critical lifeline; external; updated building document; and equipment & furnishing) are critical towards hospital disaster preparedness. Nevertheless, over the past few years these components are badly affected due to various types of disasters. Hence, the objective of this paper is to investigate the non-structural components influencing hospital’s disaster preparedness. Cross-sectional survey was conducted among thirty-one (31) Malaysian hospital’s employees. A total of 6 main constructs with 107 non-structural components were analysed and ranked by using SPSS and Relative Importance Index (RII). The results revealed that 6 main constructs (i.e. medical laboratory equipment & supplies; architectural; critical lifeline; external; updated building document; and equipment & furnishing) are rated as ‘very critical’ by the respondents. Among others, availability of medical laboratory equipment and supplies for diagnostic and equipment was ranked first. The results could serve as indicators for the public hospitals to improve its disaster preparedness in terms of planning, organising, knowledge training, equipment, exercising, evaluating and corrective actions through non-structural components.

Architecture Governance: The Importance of Architecture Governance for Achieving Operationally Responsive Ground Systems

Science.gov (United States)

Kolar, Mike; Estefan, Jeff; Giovannoni, Brian; Barkley, Erik

2011-01-01

Topics covered (1) Why Governance and Why Now? (2) Characteristics of Architecture Governance (3) Strategic Elements (3a) Architectural Principles (3b) Architecture Board (3c) Architecture Compliance (4) Architecture Governance Infusion Process. Governance is concerned with decision making (i.e., setting directions, establishing standards and principles, and prioritizing investments). Architecture governance is the practice and orientation by which enterprise architectures and other architectures are managed and controlled at an enterprise-wide level

Minimalism in architecture: Architecture as a language of its identity

Directory of Open Access Journals (Sweden)

Vasilski Dragana

2012-01-01

Full Text Available Every architectural work is created on the principle that includes the meaning, and then this work is read like an artifact of the particular meaning. Resources by which the meaning is built primarily, susceptible to transformation, as well as routing of understanding (decoding messages carried by a work of architecture, are subject of semiotics and communication theories, which have played significant role for the architecture and the architect. Minimalism in architecture, as a paradigm of the XXI century architecture, means searching for essence located in the irreducible minimum. Inspired use of architectural units (archetypical elements, trough the fatasm of simplicity, assumes the primary responsibility for providing the object identity, because it participates in language formation and therefore in its reading. Volume is form by clean language that builds the expression of the fluid areas liberated of recharge needs. Reduced architectural language is appropriating to the age marked by electronic communications.

Experience in-between architecture and context: the New Acropolis Museum, Athens

Directory of Open Access Journals (Sweden)

Annette Svaneklink Jakobsen

2012-06-01

Full Text Available This article is an introduction to how architecture's context and conditions can be understood as signaletic with reference to Gilles Deleuze's concept of the signaletic material. The understanding of architecture's signaletic material addresses the process of becoming through the potentials of context and the requests towards function and programme, as well as through the methods for creating architecture—all seen as conditional components of a specific work of architecture and, consequently, as part of the signaletic material. A visit to the New Acropolis Museum is analysed to discuss how the potential of the in-between encounters of architecture, context and the experiencing subject can be part of the signaletic material and the process of becoming. This potential is actualised, for instance, in relation to the movement through the museum. The museum architecture affords experiences on potentially several levels spanning from the most pragmatic and functional use of the building as exhibition space, restaurant, book shop, etc. to the awareness of being part of an architectural intentionality as a moving body, a contemplating viewer and as a perceiver of relations between the museum building and its historical and geographical context. In the article the term “visitor” is used to emphasise this complexity of experiential potential that is made accessible by the museum's architectural design.

Architectural Narratives

DEFF Research Database (Denmark)

Kiib, Hans

2010-01-01

a functional framework for these concepts, but tries increasingly to endow the main idea of the cultural project with a spatially aesthetic expression - a shift towards “experience architecture.” A great number of these projects typically recycle and reinterpret narratives related to historical buildings......In this essay, I focus on the combination of programs and the architecture of cultural projects that have emerged within the last few years. These projects are characterized as “hybrid cultural projects,” because they intend to combine experience with entertainment, play, and learning. This essay...... and architectural heritage; another group tries to embed new performative technologies in expressive architectural representation. Finally, this essay provides a theoretical framework for the analysis of the political rationales of these projects and for the architectural representation bridges the gap between...

Constellation's Command, Control, Communications and Information (C3I) Architecture

Science.gov (United States)

Breidenthal, Julian C.

2007-01-01

Operations concepts are highly effective for: 1) Developing consensus; 2) Discovering stakeholder needs, goals, objectives; 3) Defining behavior of system components (especially emergent behaviors). An interoperability standard can provide an excellent lever to define the capabilities needed for system evolution. Two categories of architectures are needed in a program of this size are: 1) Generic - Needed for planning, design and construction standards; 2) Specific - Needed for detailed requirement allocations, interface specs. A wide variety of architectural views are needed to address stakeholder concerns, including: 1) Physical; 2) Information (structure, flow, evolution); 3) Processes (design, manufacturing, operations); 4) Performance; 5) Risk.

Business engineering. Generic Software Architecture in an Object Oriented View

Directory of Open Access Journals (Sweden)

Mihaela MURESAN

2006-01-01

Full Text Available The generic software architecture offers a solution for the the information system's development and implementation. A generic software/non-software model could be developed by integrating the enterprise blueprint concept (Zachman and the object oriented paradigm (Coad's archetype concept. The standardization of the generic software architecture for various specific software components could be a direction of crucial importance, offering the guarantee of the quality of the model and increasing the efficiency of the design, development and implementation of the software. This approach is also useful for the implementation of the ERP systems designed to fit the user’s particular requirements.

A Hybrid Power Management (HPM) Based Vehicle Architecture

Science.gov (United States)

Eichenberg, Dennis J.

2011-01-01

Society desires vehicles with reduced fuel consumption and reduced emissions. This presents a challenge and an opportunity for industry and the government. The NASA John H. Glenn Research Center (GRC) has developed a Hybrid Power Management (HPM) based vehicle architecture for space and terrestrial vehicles. GRC's Electrical and Electromagnetics Branch of the Avionics and Electrical Systems Division initiated the HPM Program for the GRC Technology Transfer and Partnership Office. HPM is the innovative integration of diverse, state-of-the-art power devices in an optimal configuration for space and terrestrial applications. The appropriate application and control of the various power devices significantly improves overall system performance and efficiency. The basic vehicle architecture consists of a primary power source, and possibly other power sources, providing all power to a common energy storage system, which is used to power the drive motors and vehicle accessory systems, as well as provide power as an emergency power system. Each component is independent, permitting it to be optimized for its intended purpose. This flexible vehicle architecture can be applied to all vehicles to considerably improve system efficiency, reliability, safety, security, and performance. This unique vehicle architecture has the potential to alleviate global energy concerns, improve the environment, stimulate the economy, and enable new missions.

Assessment of modularity architecture for recovery process of electric vehicle in supporting sustainable design

Science.gov (United States)

Baroroh, D. K.; Alfiah, D.

2018-05-01

The electric vehicle is one of the innovations to reduce the pollution of the vehicle. Nevertheless, it still has a problem, especially for disposal stage. In supporting product design and development strategy, which is the idea of sustainable design or problem solving of disposal stage, assessment of modularity architecture from electric vehicle in recovery process needs to be done. This research used Design Structure Matrix (DSM) approach to deciding interaction of components and assessment of modularity architecture using the calculation of value from 3 variables, namely Module Independence (MI), Module Similarity (MS), and Modularity for End of Life Stage (MEOL). The result of this research shows that existing design of electric vehicles has the architectural design which has a high value of modularity for recovery process on disposal stage. Accordingly, so it can be reused and recycled in component level or module without disassembly process to support the product that is environmentally friendly (sustainable design) and able reduce disassembly cost.

A HIPAA-compliant architecture for securing clinical images

Science.gov (United States)

Liu, Brent J.; Zhou, Zheng; Huang, H. K.

2005-04-01

The HIPAA (Health Insurance Portability and Accountability Act, Instituted April 2003) Security Standards mandate health institutions to protect health information against unauthorized use or disclosure. One approach to addressing this mandate is by utilizing user access control and generating audit trails of the various authorized as well as unauthorized user access of health data. Although most current clinical image systems (eg, PACS) have components that generate log files as a solution to address the HIPAA mandate, there is a lack of methodology to obtain and synthesize the pertinent data from the large volumes of log file data generated by these multiple components within a PACS. We have designed and developed a HIPAA Compliant Architecture specifically for tracking and auditing the image workflow of clinical imaging systems such as PACS. As an initial first step, a software toolkit was implemented based on the HIPAA Compliant architecture. The toolkit was implemented within a testbed PACS Simulator located in the Image Processing and Informatics (IPI) lab at the University of Southern California. Evaluation scenarios were developed where different user types performed legal and illegal access of PACS image data within each of the different components in the PACS Simulator. Results were based on whether the scenarios of unauthorized access were correctly identified and documented as well as normal operational activity.

A Potential Transmitter Architecture for Future Generation Green Wireless Base Station

Directory of Open Access Journals (Sweden)

Mike Faulkner

2009-01-01

Full Text Available Current radio frequency power amplifiers in 3G base stations have very high power consumption leading to a hefty cost and negative environmental impact. In this paper, we propose a potential architecture design for future wireless base station. Issues associated with components of the architecture are investigated. The all-digital transmitter architecture uses a combination of envelope elimination and restoration (EER and pulse width modulation (PWM/pulse position modulation (PPM modulation. The performance of this architecture is predicted from the measured output power and efficiency curves of a GaN amplifier. 57% efficiency is obtained for an OFDM signal limited to 8 dB peak to average power ratio. The PWM/PPM drive signal is generated using the improved Cartesian sigma delta techniques. It is shown that an RF oversampling by a factor of four meets the WLAN spectral mask, and WCDMA specification is met by an RF oversampling of sixteen.

Coordinating space telescope operations in an integrated planning and scheduling architecture

Science.gov (United States)

Muscettola, Nicola; Smith, Stephen F.; Cesta, Amedeo; D'Aloisi, Daniela

1992-01-01

The Heuristic Scheduling Testbed System (HSTS), a software architecture for integrated planning and scheduling, is discussed. The architecture has been applied to the problem of generating observation schedules for the Hubble Space Telescope. This problem is representative of the class of problems that can be addressed: their complexity lies in the interaction of resource allocation and auxiliary task expansion. The architecture deals with this interaction by viewing planning and scheduling as two complementary aspects of the more general process of constructing behaviors of a dynamical system. The principal components of the software architecture are described, indicating how to model the structure and dynamics of a system, how to represent schedules at multiple levels of abstraction in the temporal database, and how the problem solving machinery operates. A scheduler for the detailed management of Hubble Space Telescope operations that has been developed within HSTS is described. Experimental performance results are given that indicate the utility and practicality of the approach.

A Potential Transmitter Architecture for Future Generation Green Wireless Base Station

Directory of Open Access Journals (Sweden)

Cijvat Ellie

2009-01-01

Full Text Available Abstract Current radio frequency power amplifiers in 3G base stations have very high power consumption leading to a hefty cost and negative environmental impact. In this paper, we propose a potential architecture design for future wireless base station. Issues associated with components of the architecture are investigated. The all-digital transmitter architecture uses a combination of envelope elimination and restoration (EER and pulse width modulation (PWM/pulse position modulation (PPM modulation. The performance of this architecture is predicted from the measured output power and efficiency curves of a GaN amplifier. 57% efficiency is obtained for an OFDM signal limited to 8 dB peak to average power ratio. The PWM/PPM drive signal is generated using the improved Cartesian sigma delta techniques. It is shown that an RF oversampling by a factor of four meets the WLAN spectral mask, and WCDMA specification is met by an RF oversampling of sixteen.

A SCORM Thin Client Architecture for E-Learning Systems Based on Web Services

Science.gov (United States)

Casella, Giovanni; Costagliola, Gennaro; Ferrucci, Filomena; Polese, Giuseppe; Scanniello, Giuseppe

2007-01-01

In this paper we propose an architecture of e-learning systems characterized by the use of Web services and a suitable middleware component. These technical infrastructures allow us to extend the system with new services as well as to integrate and reuse heterogeneous software e-learning components. Moreover, they let us better support the…

Architecture Level Safety Analyses for Safety-Critical Systems

Directory of Open Access Journals (Sweden)

K. S. Kushal

2017-01-01

Full Text Available The dependency of complex embedded Safety-Critical Systems across Avionics and Aerospace domains on their underlying software and hardware components has gradually increased with progression in time. Such application domain systems are developed based on a complex integrated architecture, which is modular in nature. Engineering practices assured with system safety standards to manage the failure, faulty, and unsafe operational conditions are very much necessary. System safety analyses involve the analysis of complex software architecture of the system, a major aspect in leading to fatal consequences in the behaviour of Safety-Critical Systems, and provide high reliability and dependability factors during their development. In this paper, we propose an architecture fault modeling and the safety analyses approach that will aid in identifying and eliminating the design flaws. The formal foundations of SAE Architecture Analysis & Design Language (AADL augmented with the Error Model Annex (EMV are discussed. The fault propagation, failure behaviour, and the composite behaviour of the design flaws/failures are considered for architecture safety analysis. The illustration of the proposed approach is validated by implementing the Speed Control Unit of Power-Boat Autopilot (PBA system. The Error Model Annex (EMV is guided with the pattern of consideration and inclusion of probable failure scenarios and propagation of fault conditions in the Speed Control Unit of Power-Boat Autopilot (PBA. This helps in validating the system architecture with the detection of the error event in the model and its impact in the operational environment. This also provides an insight of the certification impact that these exceptional conditions pose at various criticality levels and design assurance levels and its implications in verifying and validating the designs.

Landscape architecture as an entity of property development in Wilayah Persekutuan, Putrajaya

Directory of Open Access Journals (Sweden)

Ahmad Nasyution bin Abdul Razak

2015-12-01

Full Text Available This study explores the relationship between landscape architecture and property development. Landscape architecture emphasizes the nature of conservation, development of public parks, city parks, local parks, artificial forests, lakes, recreational areas, outdoor recreation centers, open space systems and other components of landscape architecture in providing opportunities and benefits for real estate development. Backed by ample literature review, this study reveals the significant relationship between land, real estate and landscape architecture. Landscape architecture which provides an open park and green space can be expanded to benefit the social, environment and economy through optimal used of space in property development project. Hence, this study discusses the objectives which are to determine significant factors in the development of landscape architecture, to identify the importance of landscape architecture in real estate development, and to assess the relationship between landscape architecture and property development land. This study involved 50 respondents from renowned developers; Putrajaya Holdings Sdn Bhd (PJH, Selangor State Development Corporation (PKNS, the local authority; Putrajaya Corporation (PPJ, Kajang Municipal Council (MPKj, relevant agencies; Valuation and Property Services Department-JPPH (Ministry of Finance, Department of Town and Country Planning (Peninsular Malaysia, developers registered with ReHDA and residents / property owners in the study area. To conclude, this study offers adequate benefits to policy makers, also relevant agencies such as the local authorities, landowners, property developers, the relevant professionals and communities on the positive effects and significant relationships between landscape architecture and property development.

Architecture & Environment

Science.gov (United States)

Erickson, Mary; Delahunt, Michael

2010-01-01

Most art teachers would agree that architecture is an important form of visual art, but they do not always include it in their curriculums. In this article, the authors share core ideas from "Architecture and Environment," a teaching resource that they developed out of a long-term interest in teaching architecture and their fascination with the…

A Multi-homed VPN Architecture Based on Extended SOCKS+TLS Protocols

Institute of Scientific and Technical Information of China (English)

无

2005-01-01

A multi-homed VPN architecture based on extended SOCKSv5 and TLS was proposed. The architecture employs a dynamic connection mechanism for multiple proxies in the end system,in which the security-demanded transmission connections can switch smoothly among the multiple proxies by maintaining a coherent connection context. The mechanism is transparent to application programs and can support the building of VPN. With the cooperation of some other security components,the mechanism guarantees the resource availability and reliability of the end system against some attacks to the specific ports or hosts.

Electromagnetic Vibration Energy Harvesting Devices Architectures, Design, Modeling and Optimization

CERN Document Server

Spreemann, Dirk

2012-01-01

Electromagnetic vibration transducers are seen as an effective way of harvesting ambient energy for the supply of sensor monitoring systems. Different electromagnetic coupling architectures have been employed but no comprehensive comparison with respect to their output performance has been carried out up to now. Electromagnetic Vibration Energy Harvesting Devices introduces an optimization approach which is applied to determine optimal dimensions of the components (magnet, coil and back iron). Eight different commonly applied coupling architectures are investigated. The results show that correct dimensions are of great significance for maximizing the efficiency of the energy conversion. A comparison yields the architectures with the best output performance capability which should be preferably employed in applications. A prototype development is used to demonstrate how the optimization calculations can be integrated into the design–flow. Electromagnetic Vibration Energy Harvesting Devices targets the design...

Exporting Humanist Architecture

DEFF Research Database (Denmark)

Nielsen, Tom

2016-01-01

The article is a chapter in the catalogue for the Danish exhibition at the 2016 Architecture Biennale in Venice. The catalogue is conceived at an independent book exploring the theme Art of Many - The Right to Space. The chapter is an essay in this anthology tracing and discussing the different...... values and ethical stands involved in the export of Danish Architecture. Abstract: Danish architecture has, in a sense, been driven by an unwritten contract between the architects and the democratic state and its institutions. This contract may be viewed as an ethos – an architectural tradition...... with inherent aesthetic and moral values. Today, however, Danish architecture is also an export commodity. That raises questions, which should be debated as openly as possible. What does it mean for architecture and architects to practice in cultures and under political systems that do not use architecture...

Evaluation of CNN architectures for gait recognition based on optical flow maps

OpenAIRE

Castro, F. M.; Marín-Jiménez, M.J.; Guil, N.; López-Tapia, S.; Pérez de la Blanca, N.

2017-01-01

This work targets people identification in video based on the way they walk (\\ie gait) by using deep learning architectures. We explore the use of convolutional neural networks (CNN) for learning high-level descriptors from low-level motion features (\\ie optical flow components). The low number of training samples for each subject and the use of a test set containing subjects different from the training ones makes the search of a good CNN architecture a challenging task. Universidad de Mál...

Electro-optic architecture for servicing sensors and actuators in advanced aircraft propulsion systems

Science.gov (United States)

Poppel, G. L.; Glasheen, W. M.

1989-01-01

A detailed design of a fiber optic propulsion control system, integrating favored sensors and electro-optics architecture is presented. Layouts, schematics, and sensor lists describe an advanced fighter engine system model. Components and attributes of candidate fiber optic sensors are identified, and evaluation criteria are used in a trade study resulting in favored sensors for each measurand. System architectural ground rules were applied to accomplish an electro-optics architecture for the favored sensors. A key result was a considerable reduction in signal conductors. Drawings, schematics, specifications, and printed circuit board layouts describe the detailed system design, including application of a planar optical waveguide interface.

Fragments of Architecture

DEFF Research Database (Denmark)

Bang, Jacob Sebastian

2016-01-01

Topic 3: “Case studies dealing with the artistic and architectural work of architects worldwide, and the ties between specific artistic and architectural projects, methodologies and products”......Topic 3: “Case studies dealing with the artistic and architectural work of architects worldwide, and the ties between specific artistic and architectural projects, methodologies and products”...

Visualizing Metrics on Areas of Interest in Software Architecture Diagrams

NARCIS (Netherlands)

Byelas, Heorhiy; Telea, Alexandru; Eades, P; Ertl, T; Shen, HW

2009-01-01

We present a new method for the combined visualization of software architecture diagrams, Such as UML class diagrams or component diagrams, and software metrics defined on groups of diagram elements. Our method extends an existing rendering technique for the so-called areas of interest in system

Super-resolution microscopy reveals cell wall dynamics and peptidoglycan architecture in ovococcal bacteria.

Science.gov (United States)

Wheeler, Richard; Mesnage, Stéphane; Boneca, Ivo G; Hobbs, Jamie K; Foster, Simon J

2011-12-01

Cell morphology and viability in Eubacteria is dictated by the architecture of peptidoglycan, the major and essential structural component of the cell wall. Although the biochemical composition of peptidoglycan is well understood, how the peptidoglycan architecture can accommodate the dynamics of growth and division while maintaining cell shape remains largely unknown. Here, we elucidate the peptidoglycan architecture and dynamics of bacteria with ovoid cell shape (ovococci), which includes a number of important pathogens, by combining biochemical analyses with atomic force and super-resolution microscopies. Atomic force microscopy analysis showed preferential orientation of the peptidoglycan network parallel to the short axis of the cell, with distinct architectural features associated with septal and peripheral wall synthesis. Super-resolution three-dimensional structured illumination fluorescence microscopy was applied for the first time in bacteria to unravel the dynamics of peptidoglycan assembly in ovococci. The ovococci have a unique peptidoglycan architecture and growth mode not observed in other model organisms. © 2011 Blackwell Publishing Ltd.

Enterprise architecture management

DEFF Research Database (Denmark)

Rahimi, Fatemeh; Gøtze, John; Møller, Charles

2017-01-01

Despite the growing interest in enterprise architecture management, researchers and practitioners lack a shared understanding of its applications in organizations. Building on findings from a literature review and eight case studies, we develop a taxonomy that categorizes applications of enterprise...... architecture management based on three classes of enterprise architecture scope. Organizations may adopt enterprise architecture management to help form, plan, and implement IT strategies; help plan and implement business strategies; or to further complement the business strategy-formation process....... The findings challenge the traditional IT-centric view of enterprise architecture management application and suggest enterprise architecture management as an approach that could support the consistent design and evolution of an organization as a whole....

Enterprise architecture management

DEFF Research Database (Denmark)

Rahimi, Fatemeh; Gøtze, John; Møller, Charles

2017-01-01

architecture management based on three classes of enterprise architecture scope. Organizations may adopt enterprise architecture management to help form, plan, and implement IT strategies; help plan and implement business strategies; or to further complement the business strategy-formation process......Despite the growing interest in enterprise architecture management, researchers and practitioners lack a shared understanding of its applications in organizations. Building on findings from a literature review and eight case studies, we develop a taxonomy that categorizes applications of enterprise....... The findings challenge the traditional IT-centric view of enterprise architecture management application and suggest enterprise architecture management as an approach that could support the consistent design and evolution of an organization as a whole....

SOA based Data Architecture for HTML5 Web Applications

Directory of Open Access Journals (Sweden)

Catalin STRIMBEI

2013-01-01

Full Text Available Web Services based architectures have already been established as the preferred way to integrate SOA specific components, from the front-end to the back-end business services. One of the key elements of such architecture are data-based or entity services. In this context, SDO standard and SDO related technologies have been confirmed as a possible approach to aggregate such enterprise-wide federation of data services, mainly backed by database servers, but not limited to them. In the followings, we will discuss an architectural purpose based on SDO approach to seamlessly integrate presentation and data services within an enterprise SOA context. This way we will outline the benefits of a common end-to-end data integration strategy. Also, we will try to argue that using HTML5 based clients as front end services in conjunction with SDO data services could be an effective strategy to adopt the mobile computing in the enterprise context.

An open architecture for medical image workstation

Science.gov (United States)

Liang, Liang; Hu, Zhiqiang; Wang, Xiangyun

2005-04-01

Dealing with the difficulties of integrating various medical image viewing and processing technologies with a variety of clinical and departmental information systems and, in the meantime, overcoming the performance constraints in transferring and processing large-scale and ever-increasing image data in healthcare enterprise, we design and implement a flexible, usable and high-performance architecture for medical image workstations. This architecture is not developed for radiology only, but for any workstations in any application environments that may need medical image retrieving, viewing, and post-processing. This architecture contains an infrastructure named Memory PACS and different kinds of image applications built on it. The Memory PACS is in charge of image data caching, pre-fetching and management. It provides image applications with a high speed image data access and a very reliable DICOM network I/O. In dealing with the image applications, we use dynamic component technology to separate the performance-constrained modules from the flexibility-constrained modules so that different image viewing or processing technologies can be developed and maintained independently. We also develop a weakly coupled collaboration service, through which these image applications can communicate with each other or with third party applications. We applied this architecture in developing our product line and it works well. In our clinical sites, this architecture is applied not only in Radiology Department, but also in Ultrasonic, Surgery, Clinics, and Consultation Center. Giving that each concerned department has its particular requirements and business routines along with the facts that they all have different image processing technologies and image display devices, our workstations are still able to maintain high performance and high usability.

Plant components and authenticity of landscape architecture monuments

Directory of Open Access Journals (Sweden)

Miloš Pejchal

2011-01-01

Full Text Available Plants specifications emphasize the fundamental meaning of the “fourth space dimension” – time by their usage: (a the space cannot be composed as a static image; (b some used plants are not the planned part of the target state; (c delayed onset of full functionality; (d substantial importance of care for achieving and maintaining of the full functionality; (e cultivation measures must be implemented in a certain time period, i.e. the “time window”; (f replacement of already obsolete generation of full-grown and long-aged trees with a new generation is often carried out in the amended site conditions and different social situation. Historical authenticity of the plant components has the following specifics: (a its basic assumption may not be the original specimens of plants, it is the preservation of the principle contained in this original substance; (b the period during which the plant is able to represent the principle of the original substance is often shorter than the length of its existence; (c gradual recovery of surviving individuals is often difficult to impossible in plants groups and stands; (d it is often impossible to meet the recommendations of Venice Charter to not to apply the hypothesis and differentiation of added parts from the original ones. There was not paid enough attention to following aspects of the authenticity of plant components: (a the importance of particular developmental stages of the element; (b the role of age structure (the same age – different age for different types of elements; (c the effect of different length of the existence of space-formative elements (different periods of their recovery to the overall composition effect; (d role of historical technologies.

Self-Healing Many-Core Architecture: Analysis and Evaluation

Directory of Open Access Journals (Sweden)

Arezoo Kamran

2016-01-01

Full Text Available More pronounced aging effects, more frequent early-life failures, and incomplete testing and verification processes due to time-to-market pressure in new fabrication technologies impose reliability challenges on forthcoming systems. A promising solution to these reliability challenges is self-test and self-reconfiguration with no or limited external control. In this work a scalable self-test mechanism for periodic online testing of many-core processor has been proposed. This test mechanism facilitates autonomous detection and omission of faulty cores and makes graceful degradation of the many-core architecture possible. Several test components are incorporated in the many-core architecture that distribute test stimuli, suspend normal operation of individual processing cores, apply test, and detect faulty cores. Test is performed concurrently with the system normal operation without any noticeable downtime at the application level. Experimental results show that the proposed test architecture is extensively scalable in terms of hardware overhead and performance overhead that makes it applicable to many-cores with more than a thousand processing cores.

Open Component Portability Infrastructure (OPENCPI)

Science.gov (United States)

2013-03-01

declaration of the authored worker that must be implemented . If there is existing legacy VHDL entity architecture, then it is wrapped or modified to...that the software implementations were written to. Since all of the original code was VHDL , the HDL Authoring Model for VHDL was enhanced to meet...engineering process. This application was completed for the execution of all the components, the software implementations , and the VHDL skeletons for the

Soil Architecture and physicochemical functions

DEFF Research Database (Denmark)

de Jonge, Lis Wollesen; Møldrup, Per; Vendelboe, Anders Lindblad

2012-01-01

, and modeling of soil structure (architecture) and physical, chemical, and biological processes in different porous media systems and at different scales. Several studies in this special section also outline and discuss emerging and exciting interdisciplinary challenges for the rapidly growing vadose zone......Soils function as Earth's life support system, a thin layer full of life covering most of the terrestrial surfaces. Soils form the foundation of society. Norman Borlaug stated in his Nobel laureate lecture that “the first essential component of social justice is adequate food for all mankind.......” If we are to provide this component while sustaining environmental quality in the midst of a growing population and rapidly diminishing resources, it is imperative to study and obtain a deeper level of understanding of soil functions using state-of-the-art technologies as well as provide the next...

Modeling Architectural Patterns’ Behavior Using Architectural Primitives

NARCIS (Netherlands)

Waqas Kamal, Ahmad; Avgeriou, Paris

2008-01-01

Architectural patterns have an impact on both the structure and the behavior of a system at the architecture design level. However, it is challenging to model patterns’ behavior in a systematic way because modeling languages do not provide the appropriate abstractions and because each pattern

Self-Assembly of Hierarchical DNA Nanotube Architectures with Well-Defined Geometries.

Science.gov (United States)

Jorgenson, Tyler D; Mohammed, Abdul M; Agrawal, Deepak K; Schulman, Rebecca

2017-02-28

An essential motif for the assembly of biological materials such as actin at the scale of hundreds of nanometers and beyond is a network of one-dimensional fibers with well-defined geometry. Here, we demonstrate the programmed organization of DNA filaments into micron-scale architectures where component filaments are oriented at preprogrammed angles. We assemble L-, T-, and Y-shaped DNA origami junctions that nucleate two or three micron length DNA nanotubes at high yields. The angles between the nanotubes mirror the angles between the templates on the junctions, demonstrating that nanoscale structures can control precisely how micron-scale architectures form. The ability to precisely program filament orientation could allow the assembly of complex filament architectures in two and three dimensions, including circuit structures, bundles, and extended materials.

Space and Architecture's Current Line of Research? A Lunar Architecture Workshop With An Architectural Agenda.

Science.gov (United States)

Solomon, D.; van Dijk, A.

The "2002 ESA Lunar Architecture Workshop" (June 3-16) ESTEC, Noordwijk, NL and V2_Lab, Rotterdam, NL) is the first-of-its-kind workshop for exploring the design of extra-terrestrial (infra) structures for human exploration of the Moon and Earth-like planets introducing 'architecture's current line of research', and adopting an architec- tural criteria. The workshop intends to inspire, engage and challenge 30-40 European masters students from the fields of aerospace engineering, civil engineering, archi- tecture, and art to design, validate and build models of (infra) structures for Lunar exploration. The workshop also aims to open up new physical and conceptual terrain for an architectural agenda within the field of space exploration. A sound introduc- tion to the issues, conditions, resources, technologies, and architectural strategies will initiate the workshop participants into the context of lunar architecture scenarios. In my paper and presentation about the development of the ideology behind this work- shop, I will comment on the following questions: * Can the contemporary architectural agenda offer solutions that affect the scope of space exploration? It certainly has had an impression on urbanization and colonization of previously sparsely populated parts of Earth. * Does the current line of research in architecture offer any useful strategies for com- bining scientific interests, commercial opportunity, and public space? What can be learned from 'state of the art' architecture that blends commercial and public pro- grammes within one location? * Should commercial 'colonisation' projects in space be required to provide public space in a location where all humans present are likely to be there in a commercial context? Is the wave in Koolhaas' new Prada flagship store just a gesture to public space, or does this new concept in architecture and shopping evolve the public space? * What can we learn about designing (infra-) structures on the Moon or any other

IDD Archival Hardware Architecture and Workflow

Energy Technology Data Exchange (ETDEWEB)

Mendonsa, D; Nekoogar, F; Martz, H

2008-10-09

This document describes the functionality of every component in the DHS/IDD archival and storage hardware system shown in Fig. 1. The document describes steps by step process of image data being received at LLNL then being processed and made available to authorized personnel and collaborators. Throughout this document references will be made to one of two figures, Fig. 1 describing the elements of the architecture and the Fig. 2 describing the workflow and how the project utilizes the available hardware.

A resource management architecture for metacomputing systems.

Energy Technology Data Exchange (ETDEWEB)

Czajkowski, K.; Foster, I.; Karonis, N.; Kesselman, C.; Martin, S.; Smith, W.; Tuecke, S.

1999-08-24

Metacomputing systems are intended to support remote and/or concurrent use of geographically distributed computational resources. Resource management in such systems is complicated by five concerns that do not typically arise in other situations: site autonomy and heterogeneous substrates at the resources, and application requirements for policy extensibility, co-allocation, and online control. We describe a resource management architecture that addresses these concerns. This architecture distributes the resource management problem among distinct local manager, resource broker, and resource co-allocator components and defines an extensible resource specification language to exchange information about requirements. We describe how these techniques have been implemented in the context of the Globus metacomputing toolkit and used to implement a variety of different resource management strategies. We report on our experiences applying our techniques in a large testbed, GUSTO, incorporating 15 sites, 330 computers, and 3600 processors.

A Flexible Binding Site Architecture Provides New Insights into CcpA Global Regulation in Gram-Positive Bacteria.

Science.gov (United States)

Yang, Yunpeng; Zhang, Lu; Huang, He; Yang, Chen; Yang, Sheng; Gu, Yang; Jiang, Weihong

2017-01-24

Catabolite control protein A (CcpA) is the master regulator in Gram-positive bacteria that mediates carbon catabolite repression (CCR) and carbon catabolite activation (CCA), two fundamental regulatory mechanisms that enable competitive advantages in carbon catabolism. It is generally regarded that CcpA exerts its regulatory role by binding to a typical 14- to 16-nucleotide (nt) consensus site that is called a catabolite response element (cre) within the target regions. However, here we report a previously unknown noncanonical flexible architecture of the CcpA-binding site in solventogenic clostridia, providing new mechanistic insights into catabolite regulation. This novel CcpA-binding site, named cre var , has a unique architecture that consists of two inverted repeats and an intervening spacer, all of which are variable in nucleotide composition and length, except for a 6-bp core palindromic sequence (TGTAAA/TTTACA). It was found that the length of the intervening spacer of cre var can affect CcpA binding affinity, and moreover, the core palindromic sequence of cre var is the key structure for regulation. Such a variable architecture of cre var shows potential importance for CcpA's diverse and fine regulation. A total of 103 potential cre var sites were discovered in solventogenic Clostridium acetobutylicum, of which 42 sites were picked out for electrophoretic mobility shift assays (EMSAs), and 30 sites were confirmed to be bound by CcpA. These 30 cre var sites are associated with 27 genes involved in many important pathways. Also of significance, the cre var sites are found to be widespread and function in a great number of taxonomically different Gram-positive bacteria, including pathogens, suggesting their global role in Gram-positive bacteria. In Gram-positive bacteria, the global regulator CcpA controls a large number of important physiological and metabolic processes. Although a typical consensus CcpA-binding site, cre, has been identified, it remains

Transactions in Software Components: Container-Interposed Transactions

Czech Academy of Sciences Publication Activity Database

Procházka, M.; Plášil, František

2002-01-01

Roč. 3, č. 2 (2002), s. - ISSN 1525-9293 R&D Projects: GA ČR GA201/99/0244; GA AV ČR IAA2030902 Institutional research plan: AV0Z1030915 Keywords : transactions * component-based software architectures * transaction propagation policy * transaction attributes * container -interposed transactions Subject RIV: JC - Computer Hardware ; Software

Developing Historic Building Information Modelling Guidelines and Procedures for Architectural Heritage in Ireland

Science.gov (United States)

Murphy, M.; Corns, A.; Cahill, J.; Eliashvili, K.; Chenau, A.; Pybus, C.; Shaw, R.; Devlin, G.; Deevy, A.; Truong-Hong, L.

2017-08-01

Cultural heritage researchers have recently begun applying Building Information Modelling (BIM) to historic buildings. The model is comprised of intelligent objects with semantic attributes which represent the elements of a building structure and are organised within a 3D virtual environment. Case studies in Ireland are used to test and develop the suitable systems for (a) data capture/digital surveying/processing (b) developing library of architectural components and (c) mapping these architectural components onto the laser scan or digital survey to relate the intelligent virtual representation of a historic structure (HBIM). While BIM platforms have the potential to create a virtual and intelligent representation of a building, its full exploitation and use is restricted to narrow set of expert users with access to costly hardware, software and skills. The testing of open BIM approaches in particular IFCs and the use of game engine platforms is a fundamental component for developing much wider dissemination. The semantically enriched model can be transferred into a WEB based game engine platform.

An Auto-Configuration System for the GMSEC Architecture and API

Science.gov (United States)

Moholt, Joseph; Mayorga, Arturo

2007-01-01

A viewgraph presentation on an automated configuration concept for The Goddard Mission Services Evolution Center (GMSEC) architecture and Application Program Interface (API) is shown. The topics include: 1) The Goddard Mission Services Evolution Center (GMSEC); 2) Automated Configuration Concept; 3) Implementation Approach; and 4) Key Components and Benefits.

In-Depth Modeling of the UNIX Operating System for Architectural Cyber Security Analysis

OpenAIRE

Vernotte, Alexandre; Johnson, Pontus; Ekstedt, Mathias; Lagerström, Robert

2017-01-01

ICT systems have become an integral part of business and life. At the same time, these systems have become extremely complex. In such systems exist numerous vulnerabilities waiting to be exploited by potential threat actors. pwnPr3d is a novel modelling approach that performs automated architectural analysis with the objective of measuring the cyber security of the modeled architecture. Its integrated modelling language allows users to model software and hardware components with great level o...

An Agent Architecture for Multi-Attribute Negotiation Using Incomplete Preference Information

NARCIS (Netherlands)

Jonker, C.M.; Robu, V.; Treur, J.

2007-01-01

A component-based generic agent architecture for multi-attribute (integrative) negotiation is introduced and its application is described in a prototype system for negotiation about cars, developed in cooperation with, among others, Dutch Telecom KPN. The approach can be characterized as cooperative

An Architecture, System Engineering, and Acquisition Approach for Space System Software Resiliency

Science.gov (United States)

Phillips, Dewanne Marie

Software intensive space systems can harbor defects and vulnerabilities that may enable external adversaries or malicious insiders to disrupt or disable system functions, risking mission compromise or loss. Mitigating this risk demands a sustained focus on the security and resiliency of the system architecture including software, hardware, and other components. Robust software engineering practices contribute to the foundation of a resilient system so that the system "can take a hit to a critical component and recover in a known, bounded, and generally acceptable period of time". Software resiliency must be a priority and addressed early in the life cycle development to contribute a secure and dependable space system. Those who develop, implement, and operate software intensive space systems must determine the factors and systems engineering practices to address when investing in software resiliency. This dissertation offers methodical approaches for improving space system resiliency through software architecture design, system engineering, increased software security, thereby reducing the risk of latent software defects and vulnerabilities. By providing greater attention to the early life cycle phases of development, we can alter the engineering process to help detect, eliminate, and avoid vulnerabilities before space systems are delivered. To achieve this objective, this dissertation will identify knowledge, techniques, and tools that engineers and managers can utilize to help them recognize how vulnerabilities are produced and discovered so that they can learn to circumvent them in future efforts. We conducted a systematic review of existing architectural practices, standards, security and coding practices, various threats, defects, and vulnerabilities that impact space systems from hundreds of relevant publications and interviews of subject matter experts. We expanded on the system-level body of knowledge for resiliency and identified a new software

Memory intensive functional architecture for distributed computer control systems

International Nuclear Information System (INIS)

Dimmler, D.G.

1983-10-01

A memory-intensive functional architectue for distributed data-acquisition, monitoring, and control systems with large numbers of nodes has been conceptually developed and applied in several large-scale and some smaller systems. This discussion concentrates on: (1) the basic architecture; (2) recent expansions of the architecture which now become feasible in view of the rapidly developing component technologies in microprocessors and functional large-scale integration circuits; and (3) implementation of some key hardware and software structures and one system implementation which is a system for performing control and data acquisition of a neutron spectrometer at the Brookhaven High Flux Beam Reactor. The spectrometer is equipped with a large-area position-sensitive neutron detector

Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE)

Science.gov (United States)

2005-04-01

PA 15213-3890 Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE) Felix Bachmann and Mark Klein Software...DATES COVERED 00-00-2005 to 00-00-2005 4. TITLE AND SUBTITLE Methodical Design of Software Architecture Using an Architecture Design Assistant...important for architecture design – quality requirements and constraints are most important Here’s some evidence: If the only concern is

Architectural frameworks: defining the structures for implementing learning health systems.

Science.gov (United States)

Lessard, Lysanne; Michalowski, Wojtek; Fung-Kee-Fung, Michael; Jones, Lori; Grudniewicz, Agnes

2017-06-23

The vision of transforming health systems into learning health systems (LHSs) that rapidly and continuously transform knowledge into improved health outcomes at lower cost is generating increased interest in government agencies, health organizations, and health research communities. While existing initiatives demonstrate that different approaches can succeed in making the LHS vision a reality, they are too varied in their goals, focus, and scale to be reproduced without undue effort. Indeed, the structures necessary to effectively design and implement LHSs on a larger scale are lacking. In this paper, we propose the use of architectural frameworks to develop LHSs that adhere to a recognized vision while being adapted to their specific organizational context. Architectural frameworks are high-level descriptions of an organization as a system; they capture the structure of its main components at varied levels, the interrelationships among these components, and the principles that guide their evolution. Because these frameworks support the analysis of LHSs and allow their outcomes to be simulated, they act as pre-implementation decision-support tools that identify potential barriers and enablers of system development. They thus increase the chances of successful LHS deployment. We present an architectural framework for LHSs that incorporates five dimensions-goals, scientific, social, technical, and ethical-commonly found in the LHS literature. The proposed architectural framework is comprised of six decision layers that model these dimensions. The performance layer models goals, the scientific layer models the scientific dimension, the organizational layer models the social dimension, the data layer and information technology layer model the technical dimension, and the ethics and security layer models the ethical dimension. We describe the types of decisions that must be made within each layer and identify methods to support decision-making. In this paper, we outline

Free-electron laser emission architecture impact on extreme ultraviolet lithography

Science.gov (United States)

Hosler, Erik R.; Wood, Obert R.; Barletta, William A.

2017-10-01

Laser-produced plasma (LPP) EUV sources have demonstrated ˜125 W at customer sites, establishing confidence in EUV lithography (EUVL) as a viable manufacturing technology. However, for extension to the 3-nm technology node and beyond, existing scanner/source technology must enable higher-NA imaging systems (requiring increased resist dose and providing half-field exposures) and/or EUV multipatterning (requiring increased wafer throughput proportional to the number of exposure passes). Both development paths will require a substantial increase in EUV source power to maintain the economic viability of the technology, creating an opportunity for free-electron laser (FEL) EUV sources. FEL-based EUV sources offer an economic, high-power/single-source alternative to LPP EUV sources. Should FELs become the preferred next-generation EUV source, the choice of FEL emission architecture will greatly affect its operational stability and overall capability. A near-term industrialized FEL is expected to utilize one of the following three existing emission architectures: (1) self-amplified spontaneous emission, (2) regenerative amplifier, or (3) self-seeding. Model accelerator parameters are put forward to evaluate the impact of emission architecture on FEL output. Then, variations in the parameter space are applied to assess the potential impact to lithography operations, thereby establishing component sensitivity. The operating range of various accelerator components is discussed based on current accelerator performance demonstrated at various scientific user facilities. Finally, comparison of the performance between the model accelerator parameters and the variation in parameter space provides a means to evaluate the potential emission architectures. A scorecard is presented to facilitate this evaluation and provides a framework for future FEL design and enablement for EUVL applications.

δ-Catenin Regulates Spine Architecture via Cadherin and PDZ-dependent Interactions*

Science.gov (United States)

Yuan, Li; Seong, Eunju; Beuscher, James L.; Arikkath, Jyothi

2015-01-01

The ability of neurons to maintain spine architecture and modulate it in response to synaptic activity is a crucial component of the cellular machinery that underlies information storage in pyramidal neurons of the hippocampus. Here we show a critical role for δ-catenin, a component of the cadherin-catenin cell adhesion complex, in regulating spine head width and length in pyramidal neurons of the hippocampus. The loss of Ctnnd2, the gene encoding δ-catenin, has been associated with the intellectual disability observed in the cri du chat syndrome, suggesting that the functional roles of δ-catenin are vital for neuronal integrity and higher order functions. We demonstrate that loss of δ-catenin in a mouse model or knockdown of δ-catenin in pyramidal neurons compromises spine head width and length, without altering spine dynamics. This is accompanied by a reduction in the levels of synaptic N-cadherin. The ability of δ-catenin to modulate spine architecture is critically dependent on its ability to interact with cadherin and PDZ domain-containing proteins. We propose that loss of δ-catenin during development perturbs synaptic architecture leading to developmental aberrations in neural circuit formation that contribute to the learning disabilities in a mouse model and humans with cri du chat syndrome. PMID:25724647

A Pipelined and Parallel Architecture for Quantum Monte Carlo Simulations on FPGAs

Directory of Open Access Journals (Sweden)

Akila Gothandaraman

2010-01-01

Full Text Available Recent advances in Field-Programmable Gate Array (FPGA technology make reconfigurable computing using FPGAs an attractive platform for accelerating scientific applications. We develop a deeply pipelined and parallel architecture for Quantum Monte Carlo simulations using FPGAs. Quantum Monte Carlo simulations enable us to obtain the structural and energetic properties of atomic clusters. We experiment with different pipeline structures for each component of the design and develop a deeply pipelined architecture that provides the best performance in terms of achievable clock rate, while at the same time has a modest use of the FPGA resources. We discuss the details of the pipelined and generic architecture that is used to obtain the potential energy and wave function of a cluster of atoms.

Research of Ancient Architectures in Jin-Fen Area Based on GIS&BIM Technology

Science.gov (United States)

Jia, Jing; Zheng, Qiuhong; Gao, Huiying; Sun, Hai

2017-05-01

The number of well-preserved ancient buildings located in Shanxi Province, enjoying the absolute maximum proportion of ancient architectures in China, is about 18418, among which, 9053 buildings have the structural style of wood frame. The value of the application of BIM (Building Information Modeling) and GIS (Geographic Information System) is gradually probed and testified in the corresponding fields of ancient architecture’s spatial distribution information management, routine maintenance and special conservation & restoration, the evaluation and simulation of related disasters, such as earthquake. The research objects are ancient architectures in JIN-FEN area, which were first investigated by Sicheng LIANG and recorded in his work of “Chinese ancient architectures survey report”. The research objects, i.e. the ancient architectures in Jin-Fen area include those in Sicheng LIANG’s investigation, and further adjustments were made through authors’ on-site investigation and literature searching & collection. During this research process, the spatial distributing Geodatabase of research objects is established utilizing GIS. The BIM components library for ancient buildings is formed combining on-site investigation data and precedent classic works, such as “Yingzao Fashi”, a treatise on architectural methods in Song Dynasty, “Yongle Encyclopedia” and “Gongcheng Zuofa Zeli”, case collections of engineering practice, by the Ministry of Construction of Qing Dynasty. A building of Guangsheng temple in Hongtong county is selected as an example to elaborate the BIM model construction process based on the BIM components library for ancient buildings. Based on the foregoing work results of spatial distribution data, attribute data of features, 3D graphic information and parametric building information model, the information management system for ancient architectures in Jin-Fen Area, utilizing GIS&BIM technology, could be constructed to support the

Architectural freedom and industrialised architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

to the building physic problems a new industrialized period has started based on light weight elements basically made of wooden structures, faced with different suitable materials meant for individual expression for the specific housing area. It is the purpose of this article to widen up the different design...... to this systematic thinking of the building technique we get a diverse and functional architecture. Creating a new and clearer story telling about new and smart system based thinking behind the architectural expression....

Preemptive Architecture: Explosive Art and Future Architectures in Cursed Urban Zones

Directory of Open Access Journals (Sweden)

Stahl Stenslie

2017-04-01

Full Text Available This article describes the art and architectural research project Preemptive Architecture that uses artistic strategies and approaches to create bomb-ready architectural structures that act as instruments for the undoing of violence in war. Increasing environmental usability through destruction represents an inverse strategy that reverses common thinking patterns about warfare, art and architecture. Building structures predestined for a construc­tive destruction becomes a creative act. One of the main motivations behind this paper is to challenge and expand the material thinking as well as the socio-political conditions related to artistic, architectural and design based practices.   Article received: December 12, 2016; Article accepted: January 10, 2017; Published online: April 20, 2017 Original scholarly paper How to cite this article: Stenslie, Stahl, and Magne Wiggen. "Preemptive Architecture: Explosive Art and Future Architectures in Cursed Urban Zones." AM Journal of Art and Media Studies 12 (2017: 29-39. doi: 10.25038/am.v0i12.165

The Distinction of Ornament and Decoration in Architecture

Directory of Open Access Journals (Sweden)

Fatemeh Ahani

2017-06-01

Full Text Available Ornament has been present throughout the recorded history, revealing human's aspirations, reflections and imaginations. Correspondingly, the discussion of ornament has almost uninterruptedly been a major topic for architectural discourses; one which has led to the publication of several significant texts in which ornamental practices has been addressed from a variety of perspectives. An investigation into the key architectural texts however, reveals that the absence of a certain definition of ornament and its functions in architecture as well as the interchangeable use of the terms 'decoration' and ornament as synonyms, have always been a serious obstacle to reach a clear conception of ornament nature . In this regard, the present paper attempted to distinguish between 'ornament' and 'decoration' based on a comparative analysis of the scholars’ accounts and the way the terms were employed in the architectural texts. Results indicated that the aforementioned concepts can be distinguished by means of seven criteria including components, connection, reference source, role, field of application and reference mode. According to the most referred criteria, ornament is an essential part of architecture which creates a firm bonding with its carrier and often fulfills functions more than aesthetic one .It is mostly made up of transformed motifs and evokes natural forces that originate deeply beyond or within the body of building. Decoration on the other hand, is a pleasing arrangement of real things; a suggestion of the decorous which does not have a permanent connection with its carrier. It is also purely representational, due to its reference to external matters such as mythology, religion, history, or cultural practice.

Control System Architectures, Technologies and Concepts for Near Term and Future Human Exploration of Space

Science.gov (United States)

Boulanger, Richard; Overland, David

2004-01-01

Technologies that facilitate the design and control of complex, hybrid, and resource-constrained systems are examined. This paper focuses on design methodologies, and system architectures, not on specific control methods that may be applied to life support subsystems. Honeywell and Boeing have estimated that 60-80Y0 of the effort in developing complex control systems is software development, and only 20-40% is control system development. It has also been shown that large software projects have failure rates of as high as 50-65%. Concepts discussed include the Unified Modeling Language (UML) and design patterns with the goal of creating a self-improving, self-documenting system design process. Successful architectures for control must not only facilitate hardware to software integration, but must also reconcile continuously changing software with much less frequently changing hardware. These architectures rely on software modules or components to facilitate change. Architecting such systems for change leverages the interfaces between these modules or components.

Component-Based Modelling for Scalable Smart City Systems Interoperability: A Case Study on Integrating Energy Demand Response Systems.

Science.gov (United States)

Palomar, Esther; Chen, Xiaohong; Liu, Zhiming; Maharjan, Sabita; Bowen, Jonathan

2016-10-28

Smart city systems embrace major challenges associated with climate change, energy efficiency, mobility and future services by embedding the virtual space into a complex cyber-physical system. Those systems are constantly evolving and scaling up, involving a wide range of integration among users, devices, utilities, public services and also policies. Modelling such complex dynamic systems' architectures has always been essential for the development and application of techniques/tools to support design and deployment of integration of new components, as well as for the analysis, verification, simulation and testing to ensure trustworthiness. This article reports on the definition and implementation of a scalable component-based architecture that supports a cooperative energy demand response (DR) system coordinating energy usage between neighbouring households. The proposed architecture, called refinement of Cyber-Physical Component Systems (rCPCS), which extends the refinement calculus for component and object system (rCOS) modelling method, is implemented using Eclipse Extensible Coordination Tools (ECT), i.e., Reo coordination language. With rCPCS implementation in Reo, we specify the communication, synchronisation and co-operation amongst the heterogeneous components of the system assuring, by design scalability and the interoperability, correctness of component cooperation.

Enterprise architecture patterns practical solutions for recurring IT-architecture problems

CERN Document Server

Perroud, Thierry

2013-01-01

Every enterprise architect faces similar problems when designing and governing the enterprise architecture of a medium to large enterprise. Design patterns are a well-established concept in software engineering, used to define universally applicable solution schemes. By applying this approach to enterprise architectures, recurring problems in the design and implementation of enterprise architectures can be solved over all layers, from the business layer to the application and data layer down to the technology layer.Inversini and Perroud describe patterns at the level of enterprise architecture

A Conceptual Architecture for Adaptive Human-Computer Interface of a PT Operation Platform Based on Context-Awareness

Directory of Open Access Journals (Sweden)

Qing Xue

2014-01-01

Full Text Available We present a conceptual architecture for adaptive human-computer interface of a PT operation platform based on context-awareness. This architecture will form the basis of design for such an interface. This paper describes components, key technologies, and working principles of the architecture. The critical contents covered context information modeling, processing, relationship establishing between contexts and interface design knowledge by use of adaptive knowledge reasoning, and visualization implementing of adaptive interface with the aid of interface tools technology.

MUF architecture /art London

DEFF Research Database (Denmark)

Svenningsen Kajita, Heidi

2009-01-01

Om MUF architecture samt interview med Liza Fior og Katherine Clarke, partnere i muf architecture/art......Om MUF architecture samt interview med Liza Fior og Katherine Clarke, partnere i muf architecture/art...