Comparative study of environmental impact assessment methods ...

African Journals Online (AJOL)

This study aims to introduce and systematically investigate the environmental issues during important decision-making stages. Meanwhile, impacts of development on the environmental components will be also analyzed. This research studies various methods of predicting the environmental changes and determining the ...

The comparative risk assessment framework and tools (CRAFT)

Science.gov (United States)

Southern Research Station. USDA Forest Service

2010-01-01

To help address these challenges, the USDA Forest Service’s Eastern Forest Environmental Threat Assessment Center (EFETAC) and the University of North Carolina Asheville’s National Environmental Modeling and Analysis Center (NEMAC) designed a planning framework, called the Comparative Risk Assessment Framework and Tools (CRAFT). CRAFT is...

Environmental assessment of wood domestic heating. Synthetic report

International Nuclear Information System (INIS)

2005-12-01

This report proposes a synthesis of the results of an environmental assessment of wood domestic heating. This study is based on a life cycle analysis which quantifies the impacts on the environment of all the related activities: fuel extraction, retailing, final use, and so on. Environmental impacts are assessed by means of different indicators: energetic assessment, greenhouse effect assessment, air pollution (acidification), water pollution (eutrophication), toxic material emissions in air and into the soils. Wood is compared to other heating sources (gas, fuel, electricity). Ways to improve this environmental assessment are discussed for the different types of wood (logs, pellets)

Environmental sustainability assessment of palm biodiesel production in Thailand

International Nuclear Information System (INIS)

Silalertruksa, Thapat; Gheewala, Shabbir H.

2012-01-01

The study assesses the environmental sustainability of palm biodiesel production systems in Thailand by focusing on their energy efficiency and environmental impact potentials. The Net Energy Balance (NEB) and Renewability indicate energy gain for palm biodiesel and its co-products as compared to fossil energy inputs. In addition, life cycle assessment also reveals lower values of environmental impact potentials of biodiesel as compared to conventional diesel. For example, palm biodiesel can provide greenhouse gas (GHG) reduction of around 46–73% as compared to diesel. Nitrogen-fertilizer production and application in the plantation and the air emissions from the ponds treating palm oil mill effluent (POME) are found to be the major environmental aspects. However, the energy and environmental performances depend on various factors such as the management efficiency of empty fruit bunches (EFB) and POME and the possible land-use change in the future. Recommendations are made for improving environmental performance of palm biodiesel and for securing the long-term availability of crude palm oil supply with a view towards sustainable palm biodiesel production. -- Highlights: ► Environmental sustainability of palm biodiesel production in Thailand is assessed. ► Palm biodiesel can provide GHG reduction of around 46–73% as compared to diesel. ► Net energy ratio and renewability of palm biodiesel both range between 2 and 4. ► Efficient use of by-products in the value chain enhances environmental benefits.

Seminar on Comparative assessment of the environmental impact of radionuclides released during three major nuclear accidents: Kyshtym, Windscale, Chernobyl. Vol. 1

International Nuclear Information System (INIS)

1991-01-01

These proceedings of seminar on comparative assessment of the environmental impact of radionuclides released during three major nuclear accidents (Kyshtym, Windscale, Chernobyl) are divided into 5 parts bearing on: part 1: accident source terms; part 2: atmospheric dispersion, resuspension, chemical and physical forms of contamination; part 3: environmental contamination and transfer; part 4: radiological implications for man and his environment; part 5: countermeasures

Comparative Assessment of Energy Supply Options

International Nuclear Information System (INIS)

Rogner, H.-H.; Vladu, I. F.

2000-01-01

The complexity facing today's energy planners and decision-makers, particularly in electricity sector, has increased. They must take into account many elements in selecting technologies and strategies that will impact near term energy development and applications in their countries. While costs remain a key factor, tradeoffs between the demands of environmental protection and economic development will have to be made. This fact, together with the needs of many countries to define their energy and electricity programmes in a sustainable manner, has resulted in a growing interest in the application of improved data, tools and techniques for comparative assessment of different electricity generation options, particularly from an environmental and human health viewpoint. Although global emissions of greenhouse gases and other pollutants, e.g. SO 2 , NO x and particulate, must be reduced, the reality today is that these emissions are increasing and are expected to continue increasing. In examining the air pollutants, as well as water effluents and solid waste generated by electricity production, it is necessary to assess the full energy chain from fuel extraction to waste disposal, including the production of construction and auxiliary materials. The paper describes this concept and illustrates its implementation for assessing and comparing electricity generation costs, emissions, wastes and other environmental burdens from different energy sources. (author)

Nuclear Power and Environment Comparative Assessment of Environmental and Health Impacts of Electricity Generating Systems

International Nuclear Information System (INIS)

Rashed, S.M.

1999-01-01

This paper deals with comparative assessment of the environmental and health impacts of nuclear and other electricity generation systems. The study including normal operations and accidents in full energy chain analysis. The comparison of the environmental impacts arising from the waste management cycles associated with non emission waste are also discussed. Nuclear Power while economically feasible and meeting 17% of the world,s demand for electricity is almost free of the air polluting gases that threaten the global climate. Comparing nuclear power with other sources for electricity generation in terms of their associated environmental releases of pollutant such as SO 2 , NOX, CO 2 , CH 4 and radioisotopes, taking into account the full fuel chains chains of supply option, nuclear power will help to reduce environmental degradation due to electricity generation activities. In view of CO 2 emission, the ranking order commences with hydro, followed by nuclear, wind and photovoltaic Power Plants. CO 2 emissions from a nuclear power plant are by two orders of magnitude lower than those of fossil fueled power plants. A consequent risk comparison between different energy sources has to include al phases of the whole energy cycle. Coal mines accidents have resulted in several 1000 acute deaths over the years. Later fatalities have never been estimated. Then came hydropower, also resulting in many catastrophes and losses of human lives. Followed oil and gas energy industry, its tribute in acute fatalities is expressed in more than 1000 life lost. No estimate is available concerning later fatalities. latest in the list is commercial nuclear energy, badly illustrated by the Chernobyl accident resulting officially in 31 acute fatalities, 145 latent fatalities, and 135000 evacuated individuals. The paper offers some findings and conclusions on the role of nuclear power in protecting the global environment

Environmental impact assessment report

Energy Technology Data Exchange (ETDEWEB)

Jung, K. J.; Paik, S. T.; Chung, U. S.; Jung, K. H.; Park, S. K.; Lee, D. G.; Kim, H. R.; Kim, J. K.; Yang, S. H.; Lee, B. J.; Kim, E. H.; Choi, K. S

2000-10-01

This report is the revised Environmental Impact Assessment Report which was made and submitted as one of the license documents for TRIGA Research Reactor D and D Project. The Environmental Impact Assessment Report includes introduction of decommissioning plan, status of reactors and environmental impact of surroundings. Also it was assessed and analyzed on radioactivity for environment, and the plan was established to minimize radioactive material release. Finally environmental monitoring plan was established to confirm whether contaminated or not from radioactivity during decommissioning period. According to the assessment results, the risk of excess exposure will be not on environment and public. The first Environmental Impact Assessment Report was submitted to the government for the license and reviewed by Korea Institute of Nuclear Safety. The first Report was revised including answers for the questions arising from review process.

Cumulative Impact Assessment: Approaching Environmental Capacity in Development Area Using Environmental Impact Assessment Information

Science.gov (United States)

Cho, N.; Lee, M. J.; Maeng, J. H.

2017-12-01

Environmental impact assessment estimates the impact of development as a business unit and establishes mitigation plan. If the development is done, its economic effects can spread to the nearby areas. So that various developments can be distributed at different time intervals. The impact of the new developments can be combined with existing environmental impacts and can have a larger impact. That is, Cumulative impact assessment is needed to consider the environmental capacity of the Nearby area. Cumulative impact assessments require policy tools such as environmental impact assessment information and cumulative impact estimation models. In Korea, environmental information (water quality, air quality, etc.) of the development site is measured for environmental impact assessment and monitored for a certain period (generally 5 years) after the project. In addition, by constructing the environmental information as a spatial database, it is possible to express the environmental impact on a regional basis spatially and to intuitively use it for development site selection. Utilizing a composite model of environmental impact assessment information and Remote Sensing data for cumulative impact estimation, That can be used as a policy decision support tool that provides quantitative information for development area management, such as time series effect and sprawl phenomenon.

Nuclear power and the environment: comparative assessment of environmental and health impacts of electricity-generating systems

International Nuclear Information System (INIS)

Rashad, S.M.; Hammad, F.H.

2000-01-01

This paper deals with comparative assessment of the environmental and health impacts of nuclear and other electricity-generation systems. The study includes normal operations and accidents in the full energy chain analysis. The comparison of environmental impacts arising from the waste-management cycles associated with non-emission waste are also discussed. Nuclear power, while economically feasible and meeting 17% of the world's demand for electricity, is almost free of the air polluting gases that threaten the global climate. Comparing nuclear power with other sources for electricity generation in terms of their associated environmental releases of pollutant such as SO 2 , NOx, CO 2 CH 4 and radioisotopes, taking into account the full fuel chains of supply option, nuclear power will help to reduce environmental degradation due to electricity generation activities. In view of CO 2 emission, the ranking order commences with hydro, followed by nuclear, wind and photovoltaic power plants. CO 2 emissions from a nuclear power plant are by two order of magnitude lower than those of fossil-fuelled power plants. A consequent risk comparison between different energy sources has to include all phases of the whole energy cycle. Coal mine accidents have resulted in several 1000 acute deaths over the years. Then came hydropower, also resulting in many catastrophes and loss of human lives, followed by the oil and gas energy industries, last in the list is commercial nuclear energy, which has had a 'bad' press because of the Chernobyl accidents, resulting officially in 31 acute fatalities, and at least 145 latent fatalities. The paper offers some findings and conclusions on the role of nuclear power in protecting the global environment. (Author)

An environmental assessment system for environmental technologies

DEFF Research Database (Denmark)

Clavreul, Julie; Baumeister, Hubert; Christensen, Thomas Højlund

2014-01-01

A new model for the environmental assessment of environmental technologies, EASETECH, has been developed. The primary aim of EASETECH is to perform life-cycle assessment (LCA) of complex systems handling heterogeneous material flows. The objectives of this paper are to describe the EASETECH...

Energy and environmental assessment

DEFF Research Database (Denmark)

Lund, Henrik; Sukkumnoed, Decharut

2004-01-01

The paper introduce and discuss strategic environmental assessment (SEA) and economic assessment for energy innovation and suggests approach to influence support for sustainable energy development in Thailand.......The paper introduce and discuss strategic environmental assessment (SEA) and economic assessment for energy innovation and suggests approach to influence support for sustainable energy development in Thailand....

Integrating environmental and socioeconomic assessment

International Nuclear Information System (INIS)

Branch, K.M.; Cluett, C.; Page, T.L.

1987-01-01

Since the passage of the National Environmental Policy Act (NEPA) in 1969, considerable scientific and regulatory attention has been given to the preparation of environmental impact assessments. Part of this attention has been directed to definition of the proper scope of an environmental assessment and to debate about how the ''human environment'' should be addressed. This debate continues, and is reflected in the ongoing evolution of the definition of and relationship between the ''environmental'' and ''socioeconomic'' components of an integrated environmental impact assessment. This paper discusses the need for close integration between the environmental and socioeconomic assessment efforts and examines some of the benefits and difficulties of achieving this integration

Environmental economic impact assessment in China: Problems and prospects

International Nuclear Information System (INIS)

Lindhjem, Henrik; Hu Tao; Ma Zhong; Skjelvik, John Magne; Song Guojun; Vennemo, Haakon; Wu Jian; Zhang Shiqiu

2007-01-01

The use of economic valuation methods to assess environmental impacts of projects and policies has grown considerably in recent years. However, environmental valuation appears to have developed independently of regulations and practice of environmental impact assessment (EIA), despite its potential benefits to the EIA process. Environmental valuation may be useful in judging significance of impacts, determining mitigation level, comparing alternatives and generally enabling a more objective analysis of tradeoffs. In China, laws and regulations require the use of environmental valuation in EIA, but current practice lags far behind. This paper assesses the problems and prospects of introducing environmental valuation into the EIA process in China. We conduct four case studies of environmental economic impact assessment (EEIA), three of which are based on environmental impact statements of construction projects (a power plant, a wastewater treatment plant and a road construction project) and one for a regional pollution problem (wastewater irrigation). The paper demonstrates the potential usefulness of environmental valuation but also discusses several challenges to the introduction and wider use of EEIA, many of which are likely to be of relevance far beyond the Chinese context. The paper closes with suggesting some initial core elements of an EEIA guideline

Methodology for comparative assessment of various electricity generation systems using health and environmental impacts as the indicators

International Nuclear Information System (INIS)

Takahara, Shogo; Homma, Toshimitsu; Matsuki, Yoshio; Muramatsu, Ken

2010-12-01

This report describes the procedure of the comparative risk assessment, which is the standard approach to compare health and environmental impacts of different electricity generation systems, together with the results of the assessments and the international consensus. While there are several approaches to compare the impacts, the Impact Pathway (Damage Function) Approach is known as a popular method. This approach is characterized as the methodology that considers the emissions from power plants and the other sources, the dispersions of those pollutants, and then the impacts to the recipients of the pollutants; while, the scope of the assessments, such as types of the fuel chains as well as the time and the space of the impacts, needs to be defined upon the purpose, and the data and the model need to be justified through the process of the assessment. This approach was examined at the Coordinated Research Programme (hereinafter, 'CRP), which the International Atomic Energy Agency (hereinafter, 'IAEA) implemented with the research institutes of 12 countries on the comparative risk assessment. Upon the results of the assessments made by the CRP of the IAEA and the ExternE of the European Commission (hereinafter 'EC'), it is concluded that the impacts of the fossil fuel (coal, oil and natural gas) chains are relatively larger than of the other fuel chains, especially when the secondary chemical transformation of the pollutants and the effects of global warming are considered. On the contrary, the impacts of nuclear fuel cycle are smaller than of the fossil fuel chains'; although, there are still needs for further consensus building on the risks of the severe accidents and on the impacts of long-lived radio-nuclides spreading on the global level. (author)

Comparative environmental performance of lignocellulosic ethanol from different feedstocks

Energy Technology Data Exchange (ETDEWEB)

Gonzalez-Garcia, Sara; Moreira, M. Teresa; Feijoo, Gumersindo [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782 Santiago de Compostela (Spain)

2010-09-15

A renewable biofuel economy is projected as a pathway to decrease dependence on fossil fuels as well as to reduce greenhouse gases (GHG) emissions. Ethanol produced on large-scale from lignocellulosic raw materials is considered the most potential next generation automotive fuel. In this paper, a Life Cycle Assessment model was developed to evaluate the environmental implications of the production of ethanol from five lignocellulosic materials: alfalfa stems, poplar, Ethiopian mustard, flax shives and hemp hurds and its use in passenger cars. Two ethanol-based fuel applications, E10 (a mixture of 10% ethanol and 90% gasoline by volume) and E85 (85% ethanol and 15% gasoline by volume) were assessed and the results were compared to those of conventional gasoline (CG) in an equivalent car. The environmental performance was assessed in terms of fossil fuels requirements, global warming, photochemical oxidant formation, acidification and eutrophication by means of the Life Cycle Assessment (LCA) methodology in order to identify the best environmental friendly lignocellulosic source. The results show that, compared to CG, life cycle greenhouse gases emissions are lower for etanol blends, specifically up to 145% lower for E85-fueled car derived from Ethiopian mustard. This crop is also the best option in terms of eutrophying emissions regardless the ratio of ethanol in the blend. In the remaining impact categories, other feedstocks are considered beneficial, that is, poplar in the case of photochemical oxidants formation and flax shives for acidification. Concerning fossil fuels requirements, decreases up to 10% and 63% for E10 and E85 derived from hemp hurds and Ethiopian mustard, respectively, were obtained. According to the results, the study clearly demonstrates the importance of using low intensive energy and high biomass yield crops. LCA procedure helps to identify the key areas in the ethanol production life cycle where the researchers and technicians need to work

Life cycle assessment of energy products: environmental impact assessment of biofuels

Energy Technology Data Exchange (ETDEWEB)

Zah, R.; Boeni, H.; Gauch, M.; Hischier, R.; Lehmann, M.; Waeger, P.

2007-05-15

This final report for the Swiss Federal Office of Energy (SFOE) deals with the results of a study that evaluated the environmental impact of the entire production chain of fuels made from biomass and used in Switzerland. Firstly, the study supplies an analysis of the possible environmental impacts of biofuels that can be used as a basis for political decisions. Secondly, an environmental life cycle assessment (LCA) of various biofuels is presented. In addition, the impacts of fuel use are compared with other uses for bioenergy such as the generation of electricity and heat. The methods used in the LCA are discussed, including the Swiss method of ecological scarcity (Environmental Impact Points, UBP 06), and the European Eco-indicator 99 method. The results of the study are discussed, including the finding that not all biofuels can reduce environmental impacts as compared to fossil fuels. The role to be played by biofuels produced in an environmentally-friendly way together with other forms of renewable energy in our future energy supply is discussed.

Comparative study of environmental impact assessment methods ...

African Journals Online (AJOL)

STORAGESEVER

2009-07-20

Jul 20, 2009 ... 3Department of Environmental Health, School of Public Health, Ahvaz University of Medical Sciences, Ahvaz, Iran. .... lines in a virtual place aiming at goals opportunity. .... available to show the reality of quantitative model.

Environmental Impact Assessment: A Procedure.

Science.gov (United States)

Stover, Lloyd V.

Prepared by a firm of consulting engineers, this booklet outlines the procedural "whys and hows" of assessing environmental impact, particularly for the construction industry. Section I explores the need for environmental assessment and evaluation to determine environmental impact. It utilizes a review of the National Environmental Policy Act and…

Parameters for assessing the aquatic environmental impact of cosmetic products.

Science.gov (United States)

Vita, N A; Brohem, C A; Canavez, A D P M; Oliveira, C F S; Kruger, O; Lorencini, M; Carvalho, C M

2018-05-01

The cosmetic industry's growing concern about the impact of its supply chain on the environment, sustainability of raw materials, and biodiversity increases the need to ensure that the final product has a lower environmental impact. The objective of this review is to summarize and compare the information available from international organizations and legislation regarding the main criteria used to assess raw materials for aquatic toxicity, as well as the most suitable alternative methods for obtaining assessment parameters. Using the literature available in databases, a review of the scientific literature and international legislation, this work discusses and compares the parameters established by international organizations such as the Environmental Protection Agency (EPA) and Cradle to Cradle (C2C), as well as European legislation, namely, European Regulation 1272/2008, for assessing environmental impact. Defining the ecotoxicity parameters of the main classes of raw materials in rinse-off cosmetic products can enable the development of products that are more environmentally sustainable, prioritizing substances with less environmental impact. Copyright © 2018 Elsevier B.V. All rights reserved.

A comparative study on the Environmental Impact Assessment of industrial projects in Malaysia

Science.gov (United States)

Marmaya, E. A.; Mahbub, R.

2018-02-01

In the past decade, mankind has been manipulating the natural environment to better suit its needs for providing buildings and infrastructure for residential, commercial, business and industrial purposes. The rapid industrialization that has taken place has generated several issues regarding the environment. Therefore, managing environmental risks in construction projects has been recognized as an important process to achieve the project objectives in terms of time, cost, quality, safety and environmental sustainability. The aim of this research is to assess the environmental impact of industrial projects to the surrounding areas. The impact to the environment can be categorized into several aspects such as ecosystem impact, natural resources impact and public impact. This research employs the quantitative approach, that is, a questionnaire survey targeted at the occupants living in the surrounding areas of the case study location, namely the industrial sites in Sabah Ammonia Urea (SAMUR), Sipitang, Sabah and Lynas Advanced Materials Plant (LAMP), Gebeng Pahang. The findings of the research show that the two projects are perceived to have negative environmental impact especially for land pollution and green-house gas emissions.

Environmental income improves household-level poverty assessments and dynamics

DEFF Research Database (Denmark)

Walelign, Solomon Zena; Charlery, Lindy Callen; Smith-Hall, Carsten

2016-01-01

Household-level poverty assessments and analyses of poverty dynamics in developing countries typically do not include environmental income. Using household (n = 427 in 2006, 2009 and 2012) total income panel data sets, with and without environmental income, from Nepal, we analysed the importance...... of environmental income in household-level poverty assessments (Foster-Greer-Thorbecke indices) and dynamics (movements in the Poverty Transition Matrix). Random effects logit and ordered logit models were applied to estimate variables covarying with poverty categories and compared for annual household incomes...... with and without environmental income. Using the without environmental income data set significantly changed the number of households classified as poor, as well as rates of movements in and out of poverty. Excluding household-level environmental income also distorted estimation of covariates of poverty incidence...

Environmental assessment of solid waste systems and technologies: EASEWASTE

DEFF Research Database (Denmark)

Kirkeby, Janus Torsten; Birgisdottir, Harpa; Hansen, Trine Lund

2006-01-01

A new model has been developed for evaluating the overall resource consumption and environmental impacts of municipal solid waste management systems by the use of life cycle assessment. The model is named EASEWASTE (Environmental Assessment of Solid Waste Systems and Technologies) and is able...... may not always be the most environmentally friendly. The EASEWASTE model can identify the most environmentally sustainable solution, which may differ among waste materials and regions and can add valuable information about environmental achievements from each process in a solid waste management system....... to compare different waste management strategies, waste treatment methods and waste process technologies. The potential environmental impacts can be traced back to the most important processes and waste fractions that contribute to the relevant impacts. A model like EASEWASTE can be used by waste planners...

An Environmental Risk Assessment for Human-Use Trimethoprim in European Surface Waters

OpenAIRE

Straub, J?rg Oliver

2013-01-01

An environmental risk assessment (ERA) for the aquatic compartment in Europe from human use was developed for the old antibiotic Trimethoprim (TMP), comparing exposure and effects. The exposure assessment is based on European risk assessment default values on one hand and is refined with documented human use figures in Western Europe from IMS Health and measured removal in wastewater treatment on the other. The resulting predicted environmental concentrations (PECs) are compared with measured...

A comprehensive environmental impact assessment method for shale gas development

Directory of Open Access Journals (Sweden)

Renjin Sun

2015-03-01

Full Text Available The great success of US commercial shale gas exploitation stimulates the shale gas development in China, subsequently, the corresponding supporting policies were issued in the 12th Five-Year Plan. But from the experience in the US shale gas development, we know that the resulted environmental threats are always an unavoidable issue, but no uniform and standard evaluation system has yet been set up in China. The comprehensive environment refers to the combination of natural ecological environment and external macro-environment. In view of this, we conducted a series of studies on how to set up a comprehensive environmental impact assessment system as well as the related evaluation methodology and models. First, we made an in-depth investigation into shale gas development procedures and any possible environmental impacts, and then compared, screened and modified environmental impact assessment methods for shale gas development. Also, we established an evaluating system and assessment models according to different status of the above two types of environment: the correlation matrix method was employed to assess the impacts on natural ecological environment and the optimization distance method was modified to evaluate the impacts on external macro-environment. Finally, we substitute the two subindexes into the comprehensive environmental impact assessment model and achieved the final numerical result of environmental impact assessment. This model can be used to evaluate if a shale gas project has any impact on environment, compare the impacts before and after a shale gas development project, or the impacts of different projects.

Environmental and economic assessment of a road safety product made with virgin and recycled HDPE: a comparative study.

Science.gov (United States)

L Simões, Carla; Costa Pinto, Lígia M; Bernardo, C A

2013-01-15

The development of value-added products made from post-consumer plastic recyclates has become an important goal in the quest for a sustainable society. To attain such goal, tools with higher accuracy and wider scope are increasingly necessary. The present work describes the application of a Life Cycle Assessment (LCA)/Life Cycle Costing (LCC) integrated model, with inclusion of externalities (environmental and social costs), to Anti-Glare Lamellae (AGL) made with High Density Polyethylene (HDPE). It compares an AGL currently manufactured from virgin HDPE (current AGL) with an alternative one made with recycled HDPE (optional AGL). The results obtained show that neither the current nor the optional AGL depict the best environmental performance in all impact categories. Nevertheless, there is a clear overall environmental and economic advantage in replacing virgin HDPE with recycled HDPE. The present work also makes evident that the LCA/LCC integrated model allows the identification of economic and environmental win-win and trade-off situations related to the full life cycle of products. As such, its results can be used as valuable guidelines in product development. Copyright © 2012 Elsevier Ltd. All rights reserved.

Dealing with uncertainties in environmental burden of disease assessment

Directory of Open Access Journals (Sweden)

van der Sluijs Jeroen P

2009-04-01

Full Text Available Abstract Disability Adjusted Life Years (DALYs combine the number of people affected by disease or mortality in a population and the duration and severity of their condition into one number. The environmental burden of disease is the number of DALYs that can be attributed to environmental factors. Environmental burden of disease estimates enable policy makers to evaluate, compare and prioritize dissimilar environmental health problems or interventions. These estimates often have various uncertainties and assumptions which are not always made explicit. Besides statistical uncertainty in input data and parameters – which is commonly addressed – a variety of other types of uncertainties may substantially influence the results of the assessment. We have reviewed how different types of uncertainties affect environmental burden of disease assessments, and we give suggestions as to how researchers could address these uncertainties. We propose the use of an uncertainty typology to identify and characterize uncertainties. Finally, we argue that uncertainties need to be identified, assessed, reported and interpreted in order for assessment results to adequately support decision making.

Fuels and Materials Examination Facility: Environmental assessment, Hanford site, Richland, Washington: Environmental assessment

International Nuclear Information System (INIS)

1980-07-01

The Fuels and Materials Examination Facility (FMEF) and the High Performance Fuel Laboratory (HPFL) were originally proposed to be constructed as separate facilities in the 400 Area of the Hanford Site near Richland, Washington. The environmental effects of these two facilities were described and evaluated in the FMEF Environmental Assessment and the HPFL Final Environmental Impact Statement, ERDA-1550. For economic reasons, the two facilities will no longer be built as separate facilities. The FMEF facility plans have been modified to incorporate some of the features of the proposed HPFL facility while retaining essentially all of the capabilities of the original FMEF proposal. The purpose of this document is to update the FMEF Environmental Assessment to appropriately reflect addition of certain HPFL features into the FMEF facility and to assess the environmental affects of the facility which resulted from inclusion of HPFL features into the FMEF facility

Environmental assessment of energy production from waste and biomass

DEFF Research Database (Denmark)

Tonini, Davide

. To evaluate the environmental and energy performance of bioenergy and wasteto-energy systems life cycle assessment was used in this thesis. This was supported by other tools such as material, substance, energy flow analysis and energy system analysis. The primary objective of this research was to provide...... a consistent framework for the environmental assessment of innovative bioenergy and waste-to-energy systems including the integration of LCA with other tools (mentioned earlier). The focus was on the following aspects: - Evaluation of potential future energy scenarios for Denmark. This was doneby integrating...... assessing the environmental performance of the waste refinery, a detailed knowledge of the waste composition is recommendable as this determines the energy outputs and thereby the assessment results. The benefits offered by the waste refinery compared with incinerators and MBT plants are primarily related...

Health and environmental impacts of electricity generation systems: procedures for comparative assessments

International Nuclear Information System (INIS)

Demin, V.F.

2002-01-01

The IAEA technical report involving description of the Manual for procedure of comparison risk assessment (CRA) and external cost (ECA) of environmental and public health effect from nuclear energetics and other power generation is treated. CRA and ECA results depend on national and regional social-economic, geographic, medical and demographic, and other features. When using CRA and ECA procedures developed in concrete countries their adaptation is necessary for conditions of other countries [ru

Environmental Management Assessment of the Fernald Environmental Management Project (FEMP)

Energy Technology Data Exchange (ETDEWEB)

1993-04-01

This report documents the results of the Environmental Management Assessment performed at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio. During this assessment, the activities conducted by the assessment team included review of internal documents and reports from previous audits and assessments; interviews with US Department of Energy (DOE) and FEMP contractor personnel; and inspection and observation of selected facilities and operations. The onsite portion of the assessment was conducted from March 15 through April 1, 1993, by DOE`s Office of Environmental Audit (EH-24) located within the Office of the Assistant Secretary for Environment, Safety, and Health (EH-1). EH-24 carries out independent assessments of DOE facilities and activities as part of the EH-1 Environment, Safety, and Health (ES&H) Oversight Audit Program. The EH-24 program is designed to evaluate the status of DOE facilities and activities with respect to compliance with Federal, state, and local environmental laws and regulations; compliance with DOE Orders, Guidance and Directives; conformance with accepted industry practices and standards of performance; and the status and adequacy of management systems developed to address environmental requirements. The Environmental Management Assessment of FEMP focused on the adequacy of environmental management systems. Further, in response to requests by the Office of Environmental Restoration and Waste Management (EM) and Fernald Field Office (FN), Quality Assurance and Environmental Radiation activities at FEMP were evaluated from a programmatic standpoint. The results of the evaluation of these areas are contained in the Environmental Protection Programs section in this report.

Environmental Management Assessment of the Fernald Environmental Management Project (FEMP)

International Nuclear Information System (INIS)

1993-04-01

This report documents the results of the Environmental Management Assessment performed at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio. During this assessment, the activities conducted by the assessment team included review of internal documents and reports from previous audits and assessments; interviews with US Department of Energy (DOE) and FEMP contractor personnel; and inspection and observation of selected facilities and operations. The onsite portion of the assessment was conducted from March 15 through April 1, 1993, by DOE's Office of Environmental Audit (EH-24) located within the Office of the Assistant Secretary for Environment, Safety, and Health (EH-1). EH-24 carries out independent assessments of DOE facilities and activities as part of the EH-1 Environment, Safety, and Health (ES ampersand H) Oversight Audit Program. The EH-24 program is designed to evaluate the status of DOE facilities and activities with respect to compliance with Federal, state, and local environmental laws and regulations; compliance with DOE Orders, Guidance and Directives; conformance with accepted industry practices and standards of performance; and the status and adequacy of management systems developed to address environmental requirements. The Environmental Management Assessment of FEMP focused on the adequacy of environmental management systems. Further, in response to requests by the Office of Environmental Restoration and Waste Management (EM) and Fernald Field Office (FN), Quality Assurance and Environmental Radiation activities at FEMP were evaluated from a programmatic standpoint. The results of the evaluation of these areas are contained in the Environmental Protection Programs section in this report

Comparative life cycle assessments: The case of paper and digital media

Energy Technology Data Exchange (ETDEWEB)

Bull, Justin G., E-mail: jgbull@gmail.com; Kozak, Robert A., E-mail: rob.kozak@ubc.ca

2014-02-15

The consumption of the written word is changing, as media transitions from paper products to digital alternatives. We reviewed the life cycle assessment (LCA) research literature that compared the environmental footprint of digital and paper media. To validate the role of context in influencing LCA results, we assessed LCAs that did not compare paper and print, but focused on a product or component that is part of the Information and Communication Technology (ICT) sector. Using a framework that identifies problems in LCA conduct, we assessed whether the comparative LCAs were accurate expressions of the environmental footprints of paper and print. We hypothesized that the differences between the product systems that produce paper and digital media weaken LCA's ability to compare environmental footprints. We also hypothesized that the characteristics of ICT as an industrial sector weaken LCA as an environmental assessment methodology. We found that existing comparative LCAs offered problematic comparisons of paper and digital media for two reasons — the stark material differences between ICT products and paper products, and the unique characteristics of the ICT sector. We suggested that the context of the ICT sector, best captured by the concept of “Moore's Law”, will continuously impede the ability of the LCA methodology to measure ICT products. -- Highlights: • We review the LCA research that compares paper and digital media. • We contrast the comparative LCAs with LCAs that examine only digital products. • Stark differences between paper and digital media weakens LCA findings. • Digital products in general challenge the LCA method's reliability. • Continuous innovation and global nature of digital products impedes LCA methodology.

Comparative life cycle assessments: The case of paper and digital media

International Nuclear Information System (INIS)

Bull, Justin G.; Kozak, Robert A.

2014-01-01

The consumption of the written word is changing, as media transitions from paper products to digital alternatives. We reviewed the life cycle assessment (LCA) research literature that compared the environmental footprint of digital and paper media. To validate the role of context in influencing LCA results, we assessed LCAs that did not compare paper and print, but focused on a product or component that is part of the Information and Communication Technology (ICT) sector. Using a framework that identifies problems in LCA conduct, we assessed whether the comparative LCAs were accurate expressions of the environmental footprints of paper and print. We hypothesized that the differences between the product systems that produce paper and digital media weaken LCA's ability to compare environmental footprints. We also hypothesized that the characteristics of ICT as an industrial sector weaken LCA as an environmental assessment methodology. We found that existing comparative LCAs offered problematic comparisons of paper and digital media for two reasons — the stark material differences between ICT products and paper products, and the unique characteristics of the ICT sector. We suggested that the context of the ICT sector, best captured by the concept of “Moore's Law”, will continuously impede the ability of the LCA methodology to measure ICT products. -- Highlights: • We review the LCA research that compares paper and digital media. • We contrast the comparative LCAs with LCAs that examine only digital products. • Stark differences between paper and digital media weakens LCA findings. • Digital products in general challenge the LCA method's reliability. • Continuous innovation and global nature of digital products impedes LCA methodology

The methodology of environmental impacts assessment of environmentally hazardous facilities

OpenAIRE

Adamenko, Yaroslav

2017-01-01

The article deals with the methodology of environmental impacts assessment of environmentally hazardous facilities and activities. The stages of evaluation of environmental impacts are proved. The algorithm and technology of decision-making in the system of environmental impact assessments based on a multi-criteria utility theory are proposed.

Comparative Analysis of Environmental Impacts of Selected Products

Directory of Open Access Journals (Sweden)

A. Fedoryszyn

2013-01-01

Full Text Available The purpose of the present study is to demonstrate that environmental impacts exerted by manufactured products throughout their entire life cycle are major aspects to be considered, alongside their functional features and cost-effectiveness. One of the available methods to evaluate environmental impacts is known to as the Life Cycle Assessment (LCA method.The study summarises the reports from the literature on the subject of environmental impact assessment. In conclusions, the authorsindicate the need for assessing the environmental impact of cast products made from conventional and newly introduced alloys.

Comparative Analysis of Environmental Impacts of Selected Products

Directory of Open Access Journals (Sweden)

Fedoryszyn A.

2013-03-01

Full Text Available The purpose of the present study is to demonstrate that environmental impacts exerted by manufactured products throughout their entire life cycle are major aspects to be considered, alongside their functional features and cost-effectiveness. One of the available methods to evaluate environmental impacts is known to as the Life Cycle Assessment (LCA method. The study summarises the reports from the literature on the subject of environmental impact assessment. In conclusions, the authors indicate the need for assessing the environmental impact of cast products made from conventional and newly introduced alloys.

Assessment of Environmental Sustainability in Health Care Organizations

Directory of Open Access Journals (Sweden)

María Carmen Carnero

2015-06-01

Full Text Available Healthcare organizations should set a standard in corporate social responsibility and encourage environmental sustainability, since protection of the environment implies the development of preventive measures in healthcare. Environmental concern has traditionally focused on manufacturing plants. However, a Health Care Organization (HCO is the only type of company which generates all existing classes of waste, and 20% is dangerous, being infectious, toxic or radioactive in nature. Despite the extensive literature analysing environmental matters, there is no objective model for assessing the environmental sustainability of HCOs in such a way that the results may be compared over time for an organization, and between different organizations, to give a comparison or benchmarking tool for HCOs. This paper presents a Multi-Criteria Decision Analysis model integrating a Fuzzy Analytic Hierarchy Process and utility theory, to evaluate environmental sustainability in HCOs. The model uses criteria assessed as a function of the number of annual treatments undertaken. The model has been tested in two HCOs of very different sizes.

The comparative study on the environmental impact for various energy generating systems

International Nuclear Information System (INIS)

Jung, J. T.; Ha, J. J.; Jung, H. S.

2002-01-01

The concern about environmental problem due to electricity generation is increasing. And the current debate about the environmental and socioeconomic effects of energy use is now turning towards the internalization of externalities imposed on society and the environment that are not accounted by the producers and consumers of energy. The result of internalization of externalities are to be used in the decision making of selecting available options. Therefore, the environmental impact analysis for various energy generating systems were made by using Life Cycle Assessment(LCA). According to the results, the environmental burden due to nuclear power generating systems is low comparing with other energy generating systems due to low usage of resources. The results will be used in the comparative study on the environmental impacts for various energy generating systems

Environmental assessment of organic soybean (Glycine max.) imported from China to Denmark

DEFF Research Database (Denmark)

Knudsen, Marie Trydeman; Yu-Hui, Qiao; Van, Luo

2010-01-01

Growing global trade with organic products has increased the demand for environmental impact assessments during both production and transport. Environmental hotspots of organic soybeans produced in China and imported to Denmark were identified in a case study using a life cycle assessment approach....... Furthermore, environmental impacts of organic and conventional soybeans at farm gate were compared in the case study. The total global warming potential (GWP) per ton organic soybeans imported to Denmark revealed that 51% came from transportation and 35% from the farm level. Comparing organic and conventional...

Environmental and social life cycle assessment of bamboo bicycle frames made in Ghana

NARCIS (Netherlands)

Agyekum, Eric Ofori; Fortuin, K.P.J.; Harst-Wintraecken, van der E.J.M.

2017-01-01

This case study assessed the environmental and social impact of bicycle frames made from wild Ghanaian bamboo. The environmental life cycle assessment (LCA) of the bamboo frame was compared to the LCA results of an aluminium frame and a steel frame. The results show that the overall environmental

Environmental impacts assessment: Instruments for environmental policy making and resource management

International Nuclear Information System (INIS)

Cavelli, C.M.; Sartori, S.

1993-06-01

This review of evaluation criteria for environmental impacts assessments in Italy covers the following aspects: the efficacy of current Italian normatives governing assessment methods, the current approach of regional public administrations, the necessity for the creation of a national regulating board, environmental impacts assessment for complex environmental systems, the application of impacts assessment recommendations to resource development modelling in the planning of integrated environmental-economic systems, the involvement of the general public in decision making, techniques to determine the monetary worth of environmental resources, the use of multi-criteria analysis techniques

7 CFR 1955.136 - Environmental Assessment (EA) and Environmental Impact Statement (EIS).

Science.gov (United States)

2010-01-01

... 7 Agriculture 14 2010-01-01 2009-01-01 true Environmental Assessment (EA) and Environmental Impact... Disposal of Inventory Property General § 1955.136 Environmental Assessment (EA) and Environmental Impact Statement (EIS). (a) Prior to a final decision on some disposal actions, an environmental assessment must be...

ENVIRONMENTAL IMPACT ASSESSMENT AND MONITORING ...

African Journals Online (AJOL)

protect the environment, it is imperative to conduct environmental impact assessment ... Ethiopia enacted the Environmental Impact Assessment Proclamation in 2002 ... flora, fauna, soil, air, water, climate, natural or cultural heritage, other.

Environmental contaminants: assessment and control

National Research Council Canada - National Science Library

Vallero, Daniel A

2004-01-01

... Understanding Policy by Understanding Science Connections and Interrelationships of Environmental Science Environmental Assessment and Intervention Engineering Technical Note: Cleaning up a Hazardous Waste Site Social Aspects of Environmental Science Introduction to Environmental Policy The National Environmental Policy Act Issues in Environmental Science: Co...

Environmental assessment in the uranium industry

International Nuclear Information System (INIS)

Frost, S.E.

2002-01-01

The paper examines the subject matter to be dealt with in environmental impact assessments for uranium production facilities, the development of environmental impact statements and the processes used for assessing projects. Different types of regulatory process used to assess projects are described, using Canadian and Australian examples. Some of the techniques used in developing environmental assessments are described. Public participation, including that of special interest groups, is discussed. Some examples of assessments are examined, particularly looking at recent assessments for uranium mining projects in Canada. Trends in environmental assessment are described, using examples from a number of different projects over the past 25 years. Some recommendations for the future are offered. (author)

Environmental assessment in the uranium industry

International Nuclear Information System (INIS)

Frost, S.E.

2000-01-01

The paper examines the subject matter to be dealt with in environmental impact assessments for uranium production facilities, the development of environmental impact statements and the processes used for assessing projects. Different types of regulatory process used to assess projects are described, using Canadian and Australian examples. Some of the techniques used in developing environmental assessments are described. Public participation, including that of special interest groups, is discussed. Some examples of assessments are examined, particularly looking at recent assessments for uranium mining projects in Canada. Trends in environmental assessment are described, using examples from a number of different projects over the past 25 years. Some recommendations for the future are offered. (author)

Environmental impact assessment of abnormal events: a follow-up study

International Nuclear Information System (INIS)

Hunsaker, D.B. Jr.; Lee, D.W.

1985-01-01

Impact analyses included in environmental assessments for a selected nuclear power plant, petroleum storage facility, crude oil pipeline, and geopressure well that have experienced operational, abnormal events are compared with the data quantifying the environmental impacts of the events. Comparisons of predicted vs actual impacts suggests that prediction of the types of events and associated impacts could be improved; in some instances, impacts have been underestimated. Analysis of abnormal events is especially important in environmental assessment documents addressing a technology that is novel or unique to a particular area. Incorporation of abnormal event impact analysis into project environmental monitoring and emergency response plans can help improve these plans and can help reduce the magnitude of environmental impacts resulting from said events

Environmental impact assessment screening tool

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-05-01

An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities. 2 figs. 7 refs.

Environmental impact assessment screening tool

International Nuclear Information System (INIS)

1995-05-01

An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities

Environmental Assessment of Packaging: The Consumer Point of View

Science.gov (United States)

Van Dam YK

1996-09-01

When marketing environmentally responsible packaged products, the producer is confronted with consumer beliefs concerning the environmental friendliness of packaging materials. When making environmentally conscious packaging decisions, these consumer beliefs should be taken into account alongside the technical guidelines. Dutch consumer perceptions of the environmental friendliness of packaged products are reported and compared with the results of a life-cycle analysis assessment. It is shown that consumers judge environmental friendliness mainly from material and returnability. Furthermore, the consumer perception of the environmental friendliness of packaging material is based on the postconsumption waste, whereas the environmental effects of production are ignored. From the consumer beliefs concerning environmental friendliness implications are deduced for packaging policy and for environmental policy.KEY WORDS: Consumer behavior; Environment; Food; Packaging; Perception; Waste

Criticism on Environmental Assessment Tools

NARCIS (Netherlands)

Abdalla, G.; Maas, G.J.; Huyghe, J.; Oostra, M.; Saji Baby, xx; Bogdan Zygmunt, xx

2011-01-01

Using environmental assessment tools to assess the sustainability of buildings, homes and mixed- use area is increasing. Environmental tools assign scores to projects using some sustainability (sub) aspects according to design and realization documents and evidences. Six European sustainable urban

Scope and profoundness of environmental assessments. A study in the frame of environmental impact assessments. Strategic environmental assessment and FFH (fauna-flora-habitat) impact assessment under specific consideration of the conflict wind energy - bird protection

International Nuclear Information System (INIS)

Erb, Mareen

2013-01-01

The legal background of environmental impact assessments and the principle regulations and guidelines for this assessment are shortly summarized. The following Issues are discussed in detail: fundamentals of environmental assessments, profoundness and scope in environmental assessments; the conflict wind energy parks and birds.

Environmental assessment, Richton Dome site, Mississippi

International Nuclear Information System (INIS)

1986-05-01

The Nuclear Waste Policy Act of 1982 (42 USC Sections 10101-10226) requires the environmental assessment of a potential site to include a statement of the basis for the nomination of a site as suitable for characterization. Volume 2 of this environmental assessment provides a detailed evaluation of the Richton Dome Site and its suitability as the site for a radioactive waste disposal facility under DOE siting guidelines, as well as a comparison of the Richton Dome site with other proposed sites. Evaluation of the Richton Dome site is based on the reference repository design, but the evaluation will not change if based on the Mission Plan repository concept. The comparative evaluation of proposed sites is required under DOE guidelines, but is not intended to directly support the subsequent recommendation of three sites for characterization as candidate sites. 428 refs., 24 figs., 62 tabs

Inherent health and environmental risk assessment of nanostructured metal oxide production processes.

Science.gov (United States)

Torabifard, Mina; Arjmandi, Reza; Rashidi, Alimorad; Nouri, Jafar; Mohammadfam, Iraj

2018-01-10

The health and environmental effects of chemical processes can be assessed during the initial stage of their production. In this paper, the Chemical Screening Tool for Exposure and Environmental Release (ChemSTEER) software was used to compare the health and environmental risks of spray pyrolysis and wet chemical techniques for the fabrication of nanostructured metal oxide on a semi-industrial scale with a capacity of 300 kg/day in Iran. The pollution sources identified in each production process were pairwise compared in Expert Choice software using indicators including respiratory damage, skin damage, and environmental damages including air, water, and soil pollution. The synthesis of nanostructured zinc oxide using the wet chemical technique (with 0.523 wt%) leads to lower health and environmental risks compared to when spray pyrolysis is used (with 0.477 wt%). The health and environmental risk assessment of nanomaterial production processes can help select safer processes, modify the operation conditions, and select or modify raw materials that can help eliminate the risks.

Environmental Workplace Assessment.

Science.gov (United States)

Bernier, Jacques; And Others

1994-01-01

Describes environmental workplace assessments as tools in developing customized training, highlighting the group process and individual interview techniques. Suggests that, by assessing the cultural climate of an organization, education providers can gather essential baseline information on an organization and thereby provide a guide for further…

Strategic environmental assessment

DEFF Research Database (Denmark)

Kørnøv, Lone

1997-01-01

The integration of environmental considerations into strategic decision making is recognized as a key to achieving sustainability. In the European Union a draft directive on Strategic Environmental Assessment (SEA) is currently being reviewed by the member states. The nature of the proposed SEA...... that the SEA directive will influence the decision-making process positively and will help to promote improved environmental decisions. However, the guidelines for public participation are not sufficient and the democratic element is strongly limited. On the basis of these findings, recommendations relating...

Transboundary Environmental Impact Assessment : An Introduction

NARCIS (Netherlands)

Bastmeijer, C.J.; Koivurova, T.; Bastmeijer, K.; Koivurova, T.

2008-01-01

Environmental Impact Assessment (EIA) is a well-established instrument of environmental law and policy that aims to ensure that potential adverse environmental effects of human activities are assessed before decisions on such activities are made. The instrument is increasingly being applied in

Methodology of environmental risk assessment management

Directory of Open Access Journals (Sweden)

Saša T. Bakrač

2012-04-01

Full Text Available Successful protection of environment is mostly based on high-quality assessment of potential and present risks. Environmental risk management is a complex process which includes: identification, assessment and control of risk, namely taking measures in order to minimize the risk to an acceptable level. Environmental risk management methodology: In addition to these phases in the management of environmental risk, appropriate measures that affect the reduction of risk occurrence should be implemented: - normative and legal regulations (laws and regulations, - appropriate organizational structures in society, and - establishing quality monitoring of environment. The emphasis is placed on the application of assessment methodologies (three-model concept, as the most important aspect of successful management of environmental risk. Risk assessment methodology - European concept: The first concept of ecological risk assessment methodology is based on the so-called European model-concept. In order to better understand this ecological risk assessment methodology, two concepts - hazard and risk - are introduced. The European concept of environmental risk assessment has the following phases in its implementation: identification of hazard (danger, identification of consequences (if there is hazard, estimate of the scale of consequences, estimate of consequence probability and risk assessment (also called risk characterization. The European concept is often used to assess risk in the environment as a model for addressing the distribution of stressors along the source - path - receptor line. Risk assessment methodology - Canadian concept: The second concept of the methodology of environmental risk assessment is based on the so-called Canadian model-concept. The assessment of ecological risk includes risk arising from natural events (floods, extreme weather conditions, etc., technological processes and products, agents (chemical, biological, radiological, etc

Comparative assessment of EIA systems in MENA countries: challenges and prospects

International Nuclear Information System (INIS)

El-Fadl, Karma; El-Fadel, Mutasem

2004-01-01

Environmental impact assessment (EIA) was devised as a decision tool in response to the grand swell of ecocentric concerns to mediate between the technocentric view of continued development and the ability to create economic growth while overcoming environmental problems. The assimilation of the philosophy and practice of EIA into a broad range of cultures and political systems reflects the desire and need to integrate environmental considerations into the decision-making process. This paper unveils the status of EIA systems in countries of the Middle East and North Africa region through a comparative assessment of existing and planned legislation and procedures

Comparative and Predictive Multimedia Assessments Using Monte Carlo Uncertainty Analyses

Science.gov (United States)

Whelan, G.

2002-05-01

Multiple-pathway frameworks (sometimes referred to as multimedia models) provide a platform for combining medium-specific environmental models and databases, such that they can be utilized in a more holistic assessment of contaminant fate and transport in the environment. These frameworks provide a relatively seamless transfer of information from one model to the next and from databases to models. Within these frameworks, multiple models are linked, resulting in models that consume information from upstream models and produce information to be consumed by downstream models. The Framework for Risk Analysis in Multimedia Environmental Systems (FRAMES) is an example, which allows users to link their models to other models and databases. FRAMES is an icon-driven, site-layout platform that is an open-architecture, object-oriented system that interacts with environmental databases; helps the user construct a Conceptual Site Model that is real-world based; allows the user to choose the most appropriate models to solve simulation requirements; solves the standard risk paradigm of release transport and fate; and exposure/risk assessments to people and ecology; and presents graphical packages for analyzing results. FRAMES is specifically designed allow users to link their own models into a system, which contains models developed by others. This paper will present the use of FRAMES to evaluate potential human health exposures using real site data and realistic assumptions from sources, through the vadose and saturated zones, to exposure and risk assessment at three real-world sites, using the Multimedia Environmental Pollutant Assessment System (MEPAS), which is a multimedia model contained within FRAMES. These real-world examples use predictive and comparative approaches coupled with a Monte Carlo analysis. A predictive analysis is where models are calibrated to monitored site data, prior to the assessment, and a comparative analysis is where models are not calibrated but

Environmental assessment of different solar driven advanced oxidation processes

Energy Technology Data Exchange (ETDEWEB)

Munoz, Ivan; Rieradevall, Joan [Institut de Ciencia i Tecnologia Ambientals (ICTA), Universitat Autonoma de Barcelona, 08193 Bellaterra (Barcelona) (Spain); Torrades, Francesc [Departament d' Enginyeria Quimica, ETSEI de Terrassa, Universitat Politecnica de Catalunya, 08222 Terrassa (Barcelona) (Spain); Peral, Jose; Domenech, Xavier [Departament de Quimica, Universitat Autonoma de Barcelona, 08193 Bellaterra (Barcelona) (Spain)

2005-10-01

In this work a comparative environmental assessment of different advanced oxidation processes (AOP's) is performed. Two energy scenarios have been considered according to the energy source used: solar energy and electricity (UVA lamp). A life cycle assessment (LCA) is carried out in order to quantify the environmental impacts of the AOP's. The treatments considered are heterogenous photocatalysis, photo-Fenton reactions, the coupling of heterogeneous photocatalysis and photo-Fenton, and heterogeneous photocatalysis in combination with hydrogen peroxide. These AOP's are applied to the treatment of kraft mill bleaching wastewaters. The system under study includes the production of the catalysts, reagents as well as the production of electricity; eight environmental impact categories are assessed for each AOP: global warming, ozone depletion, aquatic eutrophication, acidification, human toxicity, freshwater aquatic toxicity, photochemical ozone formation, and abiotic resource depletion. the results of the LCA show that the environmental impact of AOP's is caused mainly by the amount of electricity consumed, whereas the impact of producing the reagents and catalysts is comparatively low. For this reason, the solar energy scenario reduces the impact more than 90% for almost all AOP's and impact categories. None of the solar driven AOP's can be identified as the best in all impact categories, but heterogenous photocatalysis and photo-Fenton reactions obtain better results than the remaining treatments, since these treatments do not consume simultaneously both TiO{sub 2} and H{sub 2}O{sub 2}, the chemicals with highest environmental burdens in the system. (author)

A Pilot Study on Comparative Assessment of Electricity Generating Systems Using Monetary Value

International Nuclear Information System (INIS)

Kim, Kil Yoo; Kim, Seong Ho; Kim, Tae Woon

2005-01-01

Recently, many variables which affect the cost of electricity generating systems are drastically changing. For examples, the price of crude oil soared above 70 dollars a barrel and it will be continuously going up. Kyoto Protocol, an international agreement signed by 141 countries that promise to reduce greenhouse gases, finally entered into force on February 16, 2005. A total of 39 countries are required to reduce their emissions of greenhouse gases, including carbon dioxide, methane and nitrous oxide, to 5.2 percent below the 1990 levels during 2008-2012. Also, many researches and government support are concentrated on the renewable energy. In Korea, the portion of renewable energy in the electricity generation will be increased up to 7% in 2010. Therefore, a comparative assessment among electricity generating systems by considering the environmental impacts, risks, health effects, and social effects is required to establish the national energy and power systems planning systematically and scientifically. Up to now, several papers for data collection and analysis of the environmental impacts, risks, and health effects for various electricity generation systems in Korea were published. However, they were not the comparative assessment covering all impacts and effects but just a partial assessment (e.g., environmental impacts assessment only), or not covering all generating systems such as nuclear, coal, LNG, hydro, oil, wind, photo-voltaic (=solar) but covering partial ones (e.g., nuclear, coal, LNG, and wind only). Although Ref. deals all electricity generating systems, and all impacts such as economic, environmental, health, and social impacts, it used too much subjective opinion by using pairwise comparison questionnaire to know the relative importance among the economic, environmental, health, and social effects. However, if economic, environmental, health, and social effects of the various electricity generation systems could be calculated by monetary value

Assessing High School Students’ Pro-Environmental Behaviour

Science.gov (United States)

Hidayah, N.; Agustin, R. R.

2017-09-01

This paper aims to reveal students’ pro-environmental behavior in a High School. Self-reported behavior assessment was administered in this study involving students with age range 15 to 18 years. Pro-environmental behavior in this study comprises six domains. Those are recycling, waste avoidance, consumerism, energy conservation, mobility and transportation, and vicarious conservation behavior. Pro-environmental behavior (PEB) of science class students was compared to behavior of non-science class students. Effect of students’ grade level and extracurricular activity on the behavior was evaluated. Study revealed that science could improve students’ PEB. It is because environmental topics are covered in science class. Student’s involvement in extracurricular activity may enhance PEB as well. In conclusion, students’ PEB is influenced by class program (science or non-science) but it is not influenced by time length in learning science. This finding could be consider by science educator in choosing strategy to enhance student’s pro-environmental behaviour.

Green energy criteria and life cycle assessment in assessing environmental competitiveness of energy products

International Nuclear Information System (INIS)

Maelkki, H.; Hongisto, M.; Turkulainen, T.; Kuisma, J.; Loikkanen, T.

1999-01-01

The liberalisation of energy markets has increased the need to enlarge the information base of fuel chains, to evaluate the environmental quality of energy products transparently and to communicate results in a credible way. The preparedness of energy purchasers, producers and sellers to support energy choices of their customers and to meet the information requirements of various stake holders can be strengthened. The environmental impacts related to energy products are turning into a significant dimension of competitiveness. Possibilities to promote market-driven environmental protection mechanisms and to construct incentives, which cover the whole energy production system exist and can be supported. Knowledge of environmental impacts of various energy products can be increased by means of several supplementary instruments like eco-profiles, environmental labels and life cycle assessments of products. Life cycle assessment forms a systematic basis of information, which supports the environmental communications directed to various stake holders. In this study selected public LCA-studies concerning energy production have been compared, criteria of green energy have been charted and their outlook has been assessed. In addition the development of an LCA- based relative environmental performance indicator system, which supports various transparent comparisons, has been outlined. The mapping of methodological differences of published LCA-studies regarding various energy alternatives proves, that there is differences e.g. in allocation principles, system boundaries, and age of source information and in many other details. These discrepancies should be known, because they also affect the results. That is why the use of available LCA studies as a basis for comparative assertions may be problematic. The renewability of an energy source is a threshold requirement in eco-energy criteria formulated and introduced by Finnish, Swedish and Norwegian nature conservation

Combined nutritional and environmental life cycle assessment of fruits and vegetables

DEFF Research Database (Denmark)

Stylianou, Katerina S.; Fantke, Peter; Jolliet, Olivier

2016-01-01

-LCA) framework that compares environmental and nutritional effects of foods in a common end -point metric, Disability Adjusted Life Years (DALY). In the assessment, environmental health impact categories include green house gases, particulate matter (PM), and pesticide residues on fruits and vegetables, while......; 35 μDALY/serving fruit benefit compared to a factor 10 lower impact. Replacing detrimental foods, such as trans-fat and red meat, with fruits or vegetables further enhances health benefit. This study illustrates the importance of considering nutritional effects in food-LCA.......Nutritional health effects from the ‘use stage’ of the life cycle of food products can be substantial, especially for fruits and vegetables. To assess potential one-serving increases in fruit and vegetable consumption in Europe, we employ the Combined Nutritional and Environmental LCA (CONE...

New technologies - How to assess environmental effects

Science.gov (United States)

Sullivan, P. J.; Lavin, M. L.

1981-01-01

A method is provided for assessing the environmental effects of a room-and-pillar mining system (RP) and a new hydraulic borehole mining system (HBM). Before environmental assessment can begin, each technology is defined in terms of its engineering characteristics at both the conceptual and preliminary design stages. The mining sites are also described in order to identify the significant advantages and constraints for each system. This can be a basic physical and biological survey of the region at the conceptual stage, but a more specific representation of site characteristics is required at the preliminary stage. Assessment of potential environmental effects of each system at the conceptual design is critical to its hardware development and application. A checklist can be used to compare and identify the negative impacts of each method, outlining the resource affected, the type of impact involved, and the exact activity causing that impact. At the preliminary design stage, these impacts should be evaluated as a result of either utilization or alteration. Underground coal mining systems have three major utilization impacts - the total area disturbed, the total water resources withdrawn from other uses, and the overall energy efficiency of the process - and one major alteration impact - the degradation of water quality by sedimentation and acid contamination. A comparison of the RP and HBM systems shows the HBM to be an environmentally less desirable system for the Central Appalachia region.

Environmental Assessment of a Waste Incineration Tax. Case Study and Evaluation of a Framework for Strategic Environmental Assessment

International Nuclear Information System (INIS)

Bjoerklund, Anna; Johansson, Jessica; Nilsson, Maans; Eldh, Peter; Finnveden, Goeran

2003-12-01

A framework for Strategic Environmental Assessment (SEA) is tested in a case study on a proposed waste incineration tax. Also included is testing of developed methods for valuation and site-dependent life cycle impact assessment. The results indicate that although a suggested waste incineration tax of 400 SEK/ton is likely to lead to environmental improvements, these are small compared to the potential improvements as shown in more visionary scenarios. In order to go in this direction a waste incineration tax based on the content of fossil carbon in the waste would be useful. The framework for SEA includes several different pathways. These have different advantages and disadvantages and provide different types of information. It is therefore suggested that they largely complement each other and that the choice of methods should be done in relation to the function of the SEA and the questions asked.

Environmental assessment: challenges and opportunities

International Nuclear Information System (INIS)

Hilbig, J.; Moffett, D.; Beri, K.

2007-01-01

As part of a $4.5 billion investment,Bruce Power is refurbishing Bruce A Units 1 and 2, having successfully completed an environmental assessment to return these units to service after a lay-up of almost 10 years. The project includes implementing a series of refurbishments and upgrades which will enhance safety, increase electricity generation capacity and improve reliability for the 30-year extended life of the units. This paper describes four challenges that were successfully managed during the extensive environmental assessment: (i) defining the scope of the Project; (ii) understanding the EA trigger under the Canadian Environmental Assessment Act; (iii) maintaining an effective relationship with the regulatory agencies; and (iv) managing stakeholder communications. (author)

Environmental assessment: challenges and opportunities

International Nuclear Information System (INIS)

Hilbig, J.; Moffett, D.; Beri, K.

2007-01-01

As part of a $4.5 billion investment, Bruce Power is refurbishing Bruce A Units 1 and 2, having successfully completed an environmental assessment to return these units to service after a lay-up of almost 10 years. The project includes implementing a series of refurbishments and upgrades which will enhance safety, increase electricity generation capacity and improve reliability for the 30-year extended life of the units. This paper describes four challenges that were successfully managed during the extensive environmental assessment: (i) defining the scope of the Project; (ii) understanding the EA trigger under the Canadian Environmental Assessment Act; (iii) maintaining an effective relationship with the regulatory agencies; and (iv) managing stakeholder communications. (author)

Environmental assessment of wood industrial and collective (with heat network) heating. Synthetic report

International Nuclear Information System (INIS)

2005-12-01

This report proposes a synthesis of the results of an environmental assessment of wood industrial and collective heating. This study is based on a life cycle analysis which quantifies the impacts on the environment of all the related activities: fuel extraction, retailing, final use, and so on. Environmental impacts are assessed by means of different indicators: energetic assessment, greenhouse effect assessment, air pollution (acidification), water pollution (eutrophication), toxic material emissions in air and into the soils. Wood is compared to other heating sources (gas, fuel, electricity). Ways to improve this environmental assessment are discussed with respect to wood supply, boiler auxiliary equipment, boiler and combustion

Policy-Led Comparative Environmental Risk Assessment of Genetically Modified Crops: Testing for Increased Risk Rather Than Profiling Phenotypes Leads to Predictable and Transparent Decision-Making

Directory of Open Access Journals (Sweden)

Alan Raybould

2018-04-01

Full Text Available We describe two contrasting methods of comparative environmental risk assessment for genetically modified (GM crops. Both are science-based, in the sense that they use science to help make decisions, but they differ in the relationship between science and policy. Policy-led comparative risk assessment begins by defining what would be regarded as unacceptable changes when the use a particular GM crop replaces an accepted use of another crop. Hypotheses that these changes will not occur are tested using existing or new data, and corroboration or falsification of the hypotheses is used to inform decision-making. Science-led comparative risk assessment, on the other hand, tends to test null hypotheses of no difference between a GM crop and a comparator. The variables that are compared may have little or no relevance to any previously stated policy objective and hence decision-making tends to be ad hoc in response to possibly spurious statistical significance. We argue that policy-led comparative risk assessment is the far more effective method. With this in mind, we caution that phenotypic profiling of GM crops, particularly with omics methods, is potentially detrimental to risk assessment.

How strategic environmental assessment can inform lenders about potential environmental risks

DEFF Research Database (Denmark)

Banhalmi-Zakar, Zsuzsa; Larsen, Sanne Vammen

2015-01-01

at a time when it can be used as an input to bank lending decisions, which can assist banks in making lending decisions with better environmental outcomes. For these reasons, we argue that in some circumstances, and particularly for project finance transactions, SEA may be a more useful environmental......In this paper, we explore the potential for strategic environmental assessment (SEA) to be a useful tool for banks to manage environmental risks and inform lending decisions. SEA is an environmental assessment tool that was developed to assist strategic-level decision-makers, such as policy...

An Environmental Risk Assessment for Human-Use Trimethoprim in European Surface Waters

Science.gov (United States)

Straub, Jürg Oliver

2013-01-01

An environmental risk assessment (ERA) for the aquatic compartment in Europe from human use was developed for the old antibiotic Trimethoprim (TMP), comparing exposure and effects. The exposure assessment is based on European risk assessment default values on one hand and is refined with documented human use figures in Western Europe from IMS Health and measured removal in wastewater treatment on the other. The resulting predicted environmental concentrations (PECs) are compared with measured environmental concentrations (MECs) from Europe, based on a large dataset incorporating more than 1800 single MECs. On the effects side, available chronic ecotoxicity data from the literature were complemented by additional, new chronic results for fish and other organisms. Based on these data, chronic-based deterministic predicted no effect concentrations (PNECs) were derived as well as two different probabilistic PNEC ranges. The ERA compares surface water PECs and MECs with aquatic PNECs for TMP. Based on all the risk characterization ratios (PEC÷PNEC as well as MEC÷PNEC) and risk graphs, there is no significant risk to surface waters. PMID:27029296

An Environmental Risk Assessment for Human-Use Trimethoprim in European Surface Waters

Directory of Open Access Journals (Sweden)

Jürg Oliver Straub

2013-03-01

Full Text Available An environmental risk assessment (ERA for the aquatic compartment in Europe from human use was developed for the old antibiotic Trimethoprim (TMP, comparing exposure and effects. The exposure assessment is based on European risk assessment default values on one hand and is refined with documented human use figures in Western Europe from IMS Health and measured removal in wastewater treatment on the other. The resulting predicted environmental concentrations (PECs are compared with measured environmental concentrations (MECs from Europe, based on a large dataset incorporating more than 1800 single MECs. On the effects side, available chronic ecotoxicity data from the literature were complemented by additional, new chronic results for fish and other organisms. Based on these data, chronic-based deterministic predicted no effect concentrations (PNECs were derived as well as two different probabilistic PNEC ranges. The ERA compares surface water PECs and MECs with aquatic PNECs for TMP. Based on all the risk characterization ratios (PEC÷PNEC as well as MEC÷PNEC and risk graphs, there is no significant risk to surface waters.

Environmental assessment methodologies for sea dumping of radioactive wastes

International Nuclear Information System (INIS)

1984-01-01

This document, which describes the content of an environmental assessment report, will assist national authorities to meet their obligations under the London Dumping Convention (LDC, 1972) by initiating those steps which are to be undertaken to ensure that ''the procedure to be followed and the nature of such reports shall be agreed by the parties in consultation'' (Article VI. 4). In the context of sea disposal of radioactive wastes, environmental assessments are taken to mean those evaluations which are undertaken to assist in the decision-making processes used by national authorities to determine: 1) How the option of sea disposal compares environmentally, technically, socially and economically with other disposal options (this constitutes the comparison with land-based alternatives); and 2) Whether the impact of a proposed sea disposal option is acceptable (this requires a detailed evaluation of the proposed operation including site selection, quantities and types of waste to be dumped, operational requirements and calculation of radiological and other risks). The term ''environmental assessment'' in these respects is deemed to include both the evaluation of the impact of sea dumping and the document that describes this evaluation

Environmental impact assessment: Process and implementation

International Nuclear Information System (INIS)

Chen, S.Y.; Tsai, S.Y.

1989-01-01

In this paper, the procedures and issues regarding the preparation of an environmental impact assessment in accordance with the National Environmental Policy Act (NEPA) as promulgated by the US Congress in 1969 are discussed. NEPA procedures and requirements are covered in general, while particular attention is given to the preparation of the environmental impact assessment. Also included is a discussion of the social impact assessment. The aim of the social impact assessment is to address the social issues involved in enhancing public understanding of the hazardous risks, thereby mitigating any conflicts that may arise in the NEPA process. 3 refs., 1 fig., 1 tab

Strategic environmental assessment can help solve environmental impact assessment failures in developing countries

International Nuclear Information System (INIS)

Alshuwaikhat, Habib M.

2005-01-01

The current trend of industrialization and urbanization in developing nations has a huge impact on anthropogenic and natural ecosystems. Pollution sources increase with the expansion of cities and cause contamination of water, air and soil. The absence of urban environmental planning and management strategies has resulted in greater concern for future urban development. This paper advocates the adoption of strategic environmental assessment (SEA) as a means to achieve sustainable development in developing countries. It investigates project-level environmental impact assessment (EIA) and its limitations. The exploration of SEA and its features are addressed. The effective implementation of SEA can create a roadmap for sustainable development. In many developing countries, the lack of transparency and accountability and ineffective public participation in the development of the policy, plan and program (PPP) would be mitigated by the SEA process. Moreover, the proactive and broadly based characteristics of SEA would benefit the institutional development of the PPP process, which is rarely experienced in many developing countries. The paper also explores the prospects for SEA and its guiding principles in developing countries. Finally, the paper calls for a coordinated effort between all government, nongovernment and international organizations involved with PPPs to enable developing countries to pursue a path of sustainable development through the development and application of strategic environmental assessment

Environmental assessment, Richton Dome site, Mississippi (US)

Energy Technology Data Exchange (ETDEWEB)

none,

1986-05-01

The Nuclear Waste Policy Act of 1982 (42 USC Sections 10101-10226) requires the environmental assessment of a potential site to include a statement of the basis for the nomination of a site as suitable for characterization. Volume 2 of this environmental assessment provides a detailed evaluation of the Richton Dome Site and its suitability as the site for a radioactive waste disposal facility under DOE siting guidelines, as well as a comparison of the Richton Dome site with other proposed sites. Evaluation of the Richton Dome site is based on the reference repository design, but the evaluation will not change if based on the Mission Plan repository concept. The comparative evaluation of proposed sites is required under DOE guidelines, but is not intended to directly support the subsequent recommendation of three sites for characterization as candidate sites. 428 refs., 24 figs., 62 tabs. (MHB)

Environmental Assessment

OpenAIRE

The Inspection Panel

2017-01-01

The Inspection Panel, the World Bank’s independent accountability mechanism, has released the third report in its Emerging Lessons Series. The latest report identifies lessons from Panel cases related to environmental assessment (EA) issues. The Panel is an impartial fact-finding body, independent from the World Bank management and staff, reporting directly to the Board. In response to com...

Methods for comparative risk assessment of different energy sources

International Nuclear Information System (INIS)

1992-10-01

The environmental and health aspects of different energy systems, particularly those associated with the generation of electricity, are emerging as significant issues for policy formulation and implementation. This, together with the growing need of many countries to define their energy programmes for the next century, has provided the basis for a renewed interest in the comparative risk assessment of different energy sources (fossil, nuclear, renewables). This document is the outcome of a Specialists Meeting on the procedural and methodological issues associated with comparative health and environmental risks of different energy sources. After an introductory chapter outlining the issues under consideration the papers presented at the Meeting, which have been indexed separately, are given. Refs, figs and tabs

Environmental impact assessment of fish farm hatcheries ...

African Journals Online (AJOL)

Environmental impact assessment of fish farm hatcheries management in lower ... Environmental impact assessments were taken to determine the causes of ... Of significance of impact assessment were activities like air, traffic, noise, had ...

A comparative study among fossil fuel power plants in PJM and California ISO by DEA environmental assessment

International Nuclear Information System (INIS)

Sueyoshi, Toshiyuki; Goto, Mika

2013-01-01

This study compares among fossil fuel power plants in PJM and California ISO by their unified (operational and environmental) performance. DEA (Data Envelopment Analysis) is used as a methodology. For comparative analysis, DEA incorporates strategic concepts such as natural and managerial disposability into the computational process. This study explores both how to measure Returns to Scale (RTS) under natural disposability and how to measure Damages to Scale (DTS) under managerial disposability. This empirical study obtains two implications on US energy policy. One of the two policy implications is that California ISO outperforms PJM in terms of the three unified efficiency measures. The result implies that strict regulation on undesirable outputs, as found in California, is important in enhancing the performance of US fossil fuel power plants. Thus, it is necessary for federal and local governments to regulate the fossil fuel power plants under the strict implementation of environmental protection. Under such a policy direction, it is possible for US fossil fuel power plants to attain economic prosperity (by enhancing their operational efficiencies) and to satisfy environmental regulation (by enhancing their environmental efficiencies). The other policy implication is that coal-fired and gas-fired power plants in PJM and California ISO need to reduce their operational sizes or introduce technology innovation on desirable and undesirable outputs and/or new management for environmental protection within their operations. Meanwhile, oil-fired power plants may increase their operational sizes if they can introduce technology innovation and new management on undesirable outputs. - Highlights: • This study compares fossil fuel power plants in PJM and California ISO. • California ISO outperforms PJM in terms of their unified efficiency measures. • Regulation by Clean Air Act is important for environmental protection. • Fossil fuel power plants need technology

Environmental assessment of PSS, feedback on 2 years of experimentation

Science.gov (United States)

Allais, Romain; Gobert, Julie

2018-05-01

This communication details the sustainability assessment of the partial transition of business model from selling products to product renting for small household equipment (SHE). Perceived by the French SHE manufacturer as a strategic opportunity to meet customers' expectations and environmental regulation, 2-years experimentation was performed on a specific territory with the support of a network of new competencies (B-to-B-to-C market). Researchers were mandated for the sustainability assessment of such a transition but this communication focuses on the environmental performance of the experimentation. The results of the comparative LCA are presented and the main environmental impacts linked to this business model transition are specified and discussed. Then, different eco-design scenarios are explored and recommendations for this specific case are proposed.

Assessment of environmental external effects in the production of energy

DEFF Research Database (Denmark)

Schleisner, L.; Meyer, H.J.; Morthorst, P.E.

1995-01-01

A project in Denmark has been carried out with the purpose to assess the environmental damages and the external costs in the production of energy. The energy production technologies that will be reported in this paper are wind power and a conventional coal fired plant. In the project the environm......A project in Denmark has been carried out with the purpose to assess the environmental damages and the external costs in the production of energy. The energy production technologies that will be reported in this paper are wind power and a conventional coal fired plant. In the project...... the environmental damages for the energy production technologies are compared, and externalities in the production of energy using renewable energy and fossil fuels are identified, estimated and monetized....

Radiation environmental impact assessment of copper exploitation

International Nuclear Information System (INIS)

Fan Guang; Wen Zhijian

2010-01-01

The radiation environmental impact of mineral exploitation on the surrounding environment has become a public concern. This paper presents the radiation environmental impact assessment of copper exploitation. Based on the project description and detailed investigations of surrounding environment, systematic radiation environmental impacts have been identified. The environmental impacts are assessed during both construction and operation phase. The environmental protection measures have also been proposed. The related conclusion and measures can play an active role in copper exploitation and environmental protection. (authors)

Environmental assessment of solid waste landfilling technologies by means of LCA-modeling

DEFF Research Database (Denmark)

Manfredi, Simone; Christensen, Thomas Højlund

2009-01-01

By using life cycle assessment (LCA) modeling, this paper compares the environmental performance of six landfilling technologies (open dump, conventional landfill with flares, conventional landfill with energy recovery, standard bioreactor landfill, flushing bioreactor landfill and semi......-aerobic landfill) and assesses the influence of the active operations practiced on these performances. The environmental assessments have been performed by means of the LCA-based tool EASEWASTE, whereby the functional unit utilized for the LCA is “landfilling of 1 ton of wet household waste in a 10 m deep landfill...... that it is crucially important to ensure the highest collection efficiency of landfill gas and leachate since a poor capture compromises the overall environmental performance. Once gas and leachate are collected and treated, the potential impacts in the standard environmental categories and on spoiled groundwater...

Methodologies of environmental impact assessment

International Nuclear Information System (INIS)

Schroll, H.

1994-01-01

This article gives a brief introduction covering the objectives of environmental impact assessment (EIA) and sustainable development, before going on to describe the screening procedure to define the environmental and socio-economic impacts of projects. The EIA procedure outlined encompasses a description of the project, examination of all environmental effects (scoping), identification of existing and predicted environmental conditions and impacts, alternative measures and mitigating measures, co-ordination, with environmental regulations, public participation, and monitoring and approval of the EIA. (UK)

Comparative analysis of methods for integrating various environmental impacts as a single index in life cycle assessment

International Nuclear Information System (INIS)

Ji, Changyoon; Hong, Taehoon

2016-01-01

Previous studies have proposed several methods for integrating characterized environmental impacts as a single index in life cycle assessment. Each of them, however, may lead to different results. This study presents internal and external normalization methods, weighting factors proposed by panel methods, and a monetary valuation based on an endpoint life cycle impact assessment method as the integration methods. Furthermore, this study investigates the differences among the integration methods and identifies the causes of the differences through a case study in which five elementary school buildings were used. As a result, when using internal normalization with weighting factors, the weighting factors had a significant influence on the total environmental impacts whereas the normalization had little influence on the total environmental impacts. When using external normalization with weighting factors, the normalization had more significant influence on the total environmental impacts than weighing factors. Due to such differences, the ranking of the five buildings varied depending on the integration methods. The ranking calculated by the monetary valuation method was significantly different from that calculated by the normalization and weighting process. The results aid decision makers in understanding the differences among these integration methods, and, finally, help them select the method most appropriate for the goal at hand.

Comparative analysis of methods for integrating various environmental impacts as a single index in life cycle assessment

Energy Technology Data Exchange (ETDEWEB)

Ji, Changyoon, E-mail: changyoon@yonsei.ac.kr; Hong, Taehoon, E-mail: hong7@yonsei.ac.kr

2016-02-15

Previous studies have proposed several methods for integrating characterized environmental impacts as a single index in life cycle assessment. Each of them, however, may lead to different results. This study presents internal and external normalization methods, weighting factors proposed by panel methods, and a monetary valuation based on an endpoint life cycle impact assessment method as the integration methods. Furthermore, this study investigates the differences among the integration methods and identifies the causes of the differences through a case study in which five elementary school buildings were used. As a result, when using internal normalization with weighting factors, the weighting factors had a significant influence on the total environmental impacts whereas the normalization had little influence on the total environmental impacts. When using external normalization with weighting factors, the normalization had more significant influence on the total environmental impacts than weighing factors. Due to such differences, the ranking of the five buildings varied depending on the integration methods. The ranking calculated by the monetary valuation method was significantly different from that calculated by the normalization and weighting process. The results aid decision makers in understanding the differences among these integration methods, and, finally, help them select the method most appropriate for the goal at hand.

16 CFR 260.8 - Environmental assessment.

Science.gov (United States)

2010-01-01

....8 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE USE OF ENVIRONMENTAL MARKETING CLAIMS § 260.8 Environmental assessment. (a) National Environmental Policy... and analysis to determine whether issuing the Guides for the Use of Environmental Marketing Claims...

Framework for conducting environmental assessments of trade negotiations

International Nuclear Information System (INIS)

2001-02-01

This document described the complex task of assessing the environmental impacts of trade negotiations with particular emphasis on the framework of the Strategic Environmental Assessment which the Government of Canada will conduct through a systematic process which can identify and evaluate possible and significant environmental impacts of an initiative. The objective of the assessment is to integrate environmental considerations into decision-making processes at the earliest possible stage. The first part of the framework identifies the importance of recognizing environmental considerations of trade and explains how the framework will contribute to environmental policy. The second part of the framework outlines the process and analytical requirements for conducting an environmental assessment of a trade negotiation. Environmental Assessment Committees will be formed by the Department of Foreign Affairs and International Trade, and will include representatives from federal government departments and agencies. All analyses will be conducted in four stages which will include identifying the economic effect of the negotiation, identifying the likely environmental impact of such changes, assessing the significance of the likely environmental impacts, and identifying enhancement/mitigation options to inform the negotiations. The framework is designed to be flexible enough to be used at current and future trade negotiations in the World Trade Organization, the Free Trade Area of the Americas and in bilateral Free Trade Agreements. An environmental assessment of trade negotiations is considered to be an important decision-making tool for promoting sustainable development. 16 refs., 1 tab

Feasibility study on application of new concept of environmental assessment to nuclear energy

International Nuclear Information System (INIS)

Lee, Young Eal; Lee, Kun Jai

2000-01-01

The existing environmental assessments of nuclear energy are focused on the two kinds of issues such as prevention of green house gas emission and radiological impact assessment. So, the comparative assessment of the other resources such as fossil fuels has been the main part and this result has been the side of nuclear power as the clean energy resource. However, now is when to develop the methodology that approaches to environmental assessment of energy in terms of the various environmental categories. Life Cycle Assessment (LCA) would be the effective environmental assessment tool, which is able to meet the necessity mentioned above. Also classification of the radiological impact and calculation of the environmental impact from the radioactive substances are indispensable as long as the nuclear energy is considered in the application of LCA for the utilization of energy in the industry. However, direct introduction of LCA to the nuclear energy is difficult more or less due to the absence of the methodology for the radiological impact assessment within the LCA framework. Therefore, this study suggests the new concept of environmental assessment. Also current status of development for the classification factor of radiological impact is introduced and investigates the feasibility of application of it to nuclear power generation system

The environmental impacts of production and use of energy. Part IV - The comparative assessment of the environmental impacts of energy sources. Phase I - Comparative data on the emissions, residuals and health hazards of energy sources. Report of the Executive Director

Energy Technology Data Exchange (ETDEWEB)

Tolba, Mostafa K [United Nations Environment Programme, Nairobi (Kenya)

1985-01-01

UNEP has undertaken a number of in-depth reviews of the environmental aspects of production and use of all sources of energy. Three major studies have so far been carried out. The first one, dealing with the environmental impacts of production, transport, processing and use of fossil fuels, was reviewed by an International Panel of Experts that met in Warsaw in April 1978. The second study, which deals with the environmental impacts of nuclear energy, was reviewed by an International Panel of Experts that met in Geneva in November 1978, and was revised at a second meeting held in Nairobi in April 1979. The third study, dealing with the environmental aspects of renewable sources of energy, was reviewed by an International Panel of Experts that met in Bangkok in January 1980. Preparations are already underway to update these three reports. This report was prepared by Dr. Yehia ElMahgary of the UNEP secretariat on the basis of papers prepared for, and discussed in, the course of UNEP's International Panel of Experts on the Comparative Assessment of the Environmental Impacts of Commercial Sources of Energy prepared for by Dr. Essam El-Hinnawi and held in Munich in November 1980, and information provided by participants after the meeting and collected by UNEP from other sources. In the course of the meeting it was realized that our knowledge was not sufficient on several issues, that many approaches existed for tackling the problem, and that it was difficult to agree on unique procedures to undertake the comparison. The draft version of this report was revised again at a second meeting held in December 1983 in New York and additional comments were collected. The Biomedical Laboratory Group of Brookhaven National Laboratory has assisted the UNEP secretariat to collect and update many figures in this cost-benefit analysis of the different sources from the bulk of the report and to treat it in a separate and more comprehensive study. The study is being undertaken by the

The environmental impacts of production and use of energy. Part IV - The comparative assessment of the environmental impacts of energy sources. Phase I - Comparative data on the emissions, residuals and health hazards of energy sources. Report of the Executive Director

International Nuclear Information System (INIS)

Tolba, Mostafa K.

1985-01-01

UNEP has undertaken a number of in-depth reviews of the environmental aspects of production and use of all sources of energy. Three major studies have so far been carried out. The first one, dealing with the environmental impacts of production, transport, processing and use of fossil fuels, was reviewed by an International Panel of Experts that met in Warsaw in April 1978. The second study, which deals with the environmental impacts of nuclear energy, was reviewed by an International Panel of Experts that met in Geneva in November 1978, and was revised at a second meeting held in Nairobi in April 1979. The third study, dealing with the environmental aspects of renewable sources of energy, was reviewed by an International Panel of Experts that met in Bangkok in January 1980. Preparations are already underway to update these three reports. This report was prepared by Dr. Yehia ElMahgary of the UNEP secretariat on the basis of papers prepared for, and discussed in, the course of UNEP's International Panel of Experts on the Comparative Assessment of the Environmental Impacts of Commercial Sources of Energy prepared for by Dr. Essam El-Hinnawi and held in Munich in November 1980, and information provided by participants after the meeting and collected by UNEP from other sources. In the course of the meeting it was realized that our knowledge was not sufficient on several issues, that many approaches existed for tackling the problem, and that it was difficult to agree on unique procedures to undertake the comparison. The draft version of this report was revised again at a second meeting held in December 1983 in New York and additional comments were collected. The Biomedical Laboratory Group of Brookhaven National Laboratory has assisted the UNEP secretariat to collect and update many figures in this cost-benefit analysis of the different sources from the bulk of the report and to treat it in a separate and more comprehensive study. The study is being undertaken by the

Environmental impact analysis of batik natural dyes using life cycle assessment

Science.gov (United States)

Rinawati, Dyah Ika; Sari, Diana Puspita; Purwanggono, Bambang; Hermawan, Andy Tri

2017-11-01

The use of natural dyes for batik dyeing is fewer than synthetic dyes because of its limitations in the application such complexity in manufacture and usage. For ease of use, natural dyes need to be processed into instant products. Extract of natural dyes are generally produced in liquid form that are less practical in long-term use. Dye powder obtained by drying the liquid extract using spray dryer. Production process of liquid natural dye is simpler and require less energy but need more energy for transporting. It is important to know which type of natural dyes should be produced based on their environmental impact. This research aim to compare environmental impact between liquid and powder natural dyes and also to find relative contribution of different stage in life cycle to total environmental impact. The appropriate method to analyze and compare the environmental impacts of powder and liquid natural dyes is Life Cycle Assessment (LCA). The "cradle to grave" approach used to assess environmental impact of powder and liquid natural dyes of Jalawe rind throughout production process of natural dyes, distribution and use of natural dyes for coloring batik. Results of this research show that powder natural dyes has lower environmental impacts than liquid natural dyes. It was found that distribution, mordanting and packaging of liquid dyes have big contribution to environmental impact.

Application of improved topsis method to comprehensive assessment of radiological environmental quality

International Nuclear Information System (INIS)

Shi Dongsheng; Di Yuming; Zhou Chunlin

2007-01-01

TOPSIS is a method for multiobjective decision-making, which can be applied to comprehensive assessment of radiological environmental quality. This paper introduces the principle of TOPSIS method and sets up the model of improved TOPSIS method, discusses the application of improved TOPSIS method to comprehensive assessment of radiological environmental quality. This method sufficiently makes use of the information of the optimal matrix. Analysis of practical examples using MATLAB program shows that it is objectively reasonable and feasible to comprehensively assess radiological environmental quality by improved TOPSIS method. This paper also provides the result of optimum number of sites and compares it with optimal index method based on TOPSIS method and traditional method. (authors)

Assessing Environmental Competencies of Primary Education Pre-Service Teachers in Spain: A Comparative Study between Two Universities

Science.gov (United States)

Alvarez-García, Olaya; Sureda-Negre, Jaume; Comas-Forgas, Rubén

2018-01-01

Purpose: In this paper, the results of an investigation aimed at analysing and comparing the environmental competences of future teachers undergoing training in two universities are presented. The purpose of this paper is to analyse the difference in the acquisition of environmental competences amongst two groups of students enrolled in two…

Environmental assessment of farm-scaled anaerobic co-digestion for bioenergy production

Energy Technology Data Exchange (ETDEWEB)

Lijó, Lucía, E-mail: lucia.lijo@usc.es [Department of Chemical Engineering, Institute of Technology, University of Santiago de Compostela, 15782 Santiago de Compostela (Spain); González-García, Sara [Department of Chemical Engineering, Institute of Technology, University of Santiago de Compostela, 15782 Santiago de Compostela (Spain); Bacenetti, Jacopo; Negri, Marco; Fiala, Marco [Department of Agricultural and Environmental Sciences, Production, Landscape, Agroenergy, University of Milan, Milan (Italy); Feijoo, Gumersindo; Moreira, María Teresa [Department of Chemical Engineering, Institute of Technology, University of Santiago de Compostela, 15782 Santiago de Compostela (Spain)

2015-07-15

Highlights: • Anaerobic monodigestion and codigestion were compared. • The environmental advantages of suitable waste management were proved. • The use of cereal crops as feedstock improves biogas yield. • Cultivation step implies the most important environmental hotspot. • Digestate management options were evaluated. - Abstract: The aim of this study was to assess the environmental profile of a bioenergy system based on a co-digestion plant using maize silage and pig slurry as substrates. All the processes involved in the production of bioenergy as well as the avoided processes accrued from the biogas production system were evaluated. The results evidenced the environmental importance of the cultivation step and the environmental credits associated to the avoided processes. In addition, this plant was compared with two different plants that digest both substrates separately. The results revealed the environmental benefits of the utilisation of pig slurry due to the absence of environmental burdens associated with its production as well as credits provided when avoiding its conventional management. The results also presented the environmental drawbacks of the utilisation of maize silage due to the environmental burdens related with its production. Accordingly, the anaerobic mono-digestion of maize silage achieved the worst results. The co-digestion of both substrates was ranked in an intermediate position. Additionally, three possible digestate management options were assessed. The results showed the beneficial effect of digestate application as an organic fertiliser, principally on account of environmental credits due to avoided mineral fertilisation. However, digestate application involves important acidifying and eutrophicating emissions.

Environmental assessment of farm-scaled anaerobic co-digestion for bioenergy production

International Nuclear Information System (INIS)

Lijó, Lucía; González-García, Sara; Bacenetti, Jacopo; Negri, Marco; Fiala, Marco; Feijoo, Gumersindo; Moreira, María Teresa

2015-01-01

Highlights: • Anaerobic monodigestion and codigestion were compared. • The environmental advantages of suitable waste management were proved. • The use of cereal crops as feedstock improves biogas yield. • Cultivation step implies the most important environmental hotspot. • Digestate management options were evaluated. - Abstract: The aim of this study was to assess the environmental profile of a bioenergy system based on a co-digestion plant using maize silage and pig slurry as substrates. All the processes involved in the production of bioenergy as well as the avoided processes accrued from the biogas production system were evaluated. The results evidenced the environmental importance of the cultivation step and the environmental credits associated to the avoided processes. In addition, this plant was compared with two different plants that digest both substrates separately. The results revealed the environmental benefits of the utilisation of pig slurry due to the absence of environmental burdens associated with its production as well as credits provided when avoiding its conventional management. The results also presented the environmental drawbacks of the utilisation of maize silage due to the environmental burdens related with its production. Accordingly, the anaerobic mono-digestion of maize silage achieved the worst results. The co-digestion of both substrates was ranked in an intermediate position. Additionally, three possible digestate management options were assessed. The results showed the beneficial effect of digestate application as an organic fertiliser, principally on account of environmental credits due to avoided mineral fertilisation. However, digestate application involves important acidifying and eutrophicating emissions

A comparative review of accident studies from recent environmental impact statements

International Nuclear Information System (INIS)

Mueller, C.; Folga, S.; Nabelssi, B.

1996-01-01

The U.S. Department of Energy (DOE) has recently prepared or is in the process of preparing a number of programmatic and site-specific environmental impact statements (EISs). This study was conducted for the purpose of reviewing the self-consistency of programmatic alternatives, associated relative impacts, and supporting data, methods, and assumptions in EISs prepared for related activities. The following EISs, which deal with waste management issues, are reviewed in this paper (the parenthetical acronyms are referred to in Table 1): (1) Final Environmental Impact Statement, Savannah River Site Waste Management, DOE/EIS-0217, Vol. II, July 1995. (SRS WM-EIS), (2) Draft Waste Management Programmatic Environmental Impact Statement for Managing Treatment, Storage, and Disposal of Radioactive and Hazardous Waste, DOE/EIS-0200-D, Vol. IV, Aug. 1995. (WM PEIS), (3) Final Environmental Impact Statement, Interim Management of Nuclear Materials at the Savannah River Site. DOE/EIS-0220, Oct. 1995. (IMNM EIS), (4) Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Environmental Impact Statement, DOE/EIS-0203-F, April 1995. (INEL Site-Wide-EIS), (5) Draft Environmental Impact Statement, Disposition of Surplus Highly Enriched Uranium, DOE/EIS-0240-D, Oct. 1995. (HEU Disposition EIS), (6) Final Environmental Impact Statement, Safe Interim Storage of Hanford Tank Wastes, Hanford Site, Richland, Washington, DOE/EIS-0212, Oct. 1995. (SIS EIS). This study compares the facility accident analysis approaches used in these EISs vis-a-vis the National Environmental Policy Act (NEPA) guidance developed by DOE (Recommendations for the Preparation of Environmental Assessments and Environmental Impact Statements, Office of NEPA Oversight). The purpose of the comparative review of these approaches with NEPA guidance is to identify potential preferred paths for future EISs

Regional Environmental Monitoring and Assessment Program Data (REMAP)

Data.gov (United States)

U.S. Environmental Protection Agency — The Regional Environmental Monitoring and Assessment Program (REMAP) was initiated to test the applicability of the Environmental Monitoring and Assessment Program...

Environmental assessment of current and future Swiss electricity supply options

International Nuclear Information System (INIS)

Bauer, Christian; Heck, Thomas; Hirschberg, Stefan; Dones, Roberto

2008-01-01

Options for near future electricity supply are currently one of the main topics in the Swiss energy policy debate. Contrary to the total energy demand per capita the trend of rising electricity demand per capita is still visible. This paper presents a comparative environmental assessment of a broad portfolio of current and future electricity generation technologies including nuclear, fossil, and renewable power plants with their associated energy chains. The evaluation, based on Life Cycle Assessment (LCA), is carried out quantifying ten different environmental indicators, grouped in the categories greenhouse gas emissions, consumption of resources, waste, and impact on ecosystems. Hydropower shows minimal environmental impacts for all indicators; for other systems, the picture is diverse. The comparison of non-aggregated indicators allows preliminary conclusions about the environmental performance of the assessed systems. Establishing ranking of technologies calls for aggregating the indicators, which can be done by weighting of the indicators based on individual or stakeholder group preferences, either within a Multi-Criteria Decision Analysis (MCDA) framework or with Life Cycle Impact Assessment (LCIA) methods. Calculating total costs of electricity by adding external costs due to impacts on human health and ecosystems to the electricity production costs poses another option for ranking of technologies. (authors)

Planning Environmental Impact Assessment Orienting Sustainable Development:Opportunities and Challenges

Institute of Scientific and Technical Information of China (English)

Sun Yanjun; Chen Xingeng; Bao Yun; Peng Xiaochun; Gao Changbo

2005-01-01

Strategic Environmental Assessment is a frontier subject in the field of Environmental Impact Assessment. In the past two decades, especially in recent years, much more importance has been attached to Strategic Environmental Assessment. The Environmental Impact Assessment Law of the P.R.China which was promulgated provides a great opportunity for the development of Planning Environmental Impact Assessment and brings great challenges for the development of traditional Project Environmental Impact Assessment and Planning Environmental Impact Assessment at the same time.In order to promote the implementation of"The EIA Law", the inherent limitations of Project Environmental Impact Assessment must be identified sufficiendy and the theory research and practice of Planning Environmental Impact Assessment should be strengthened as well. Measures should be taken currendy to enforce the operation system. The authors wish to offer a few references to the progress and implementation of Planning Environmental Impact Assessment in China.

Environmental flow assessments for transformed estuaries

Science.gov (United States)

Sun, Tao; Zhang, Heyue; Yang, Zhifeng; Yang, Wei

2015-01-01

Here, we propose an approach to environmental flow assessment that considers spatial pattern variations in potential habitats affected by river discharges and tidal currents in estuaries. The approach comprises four steps: identifying and simulating the distributions of critical environmental factors for habitats of typical species in an estuary; mapping of suitable habitats based on spatial distributions of the Habitat Suitability Index (HSI) and adopting the habitat aggregation index to understand fragmentation of potential suitable habitats; defining variations in water requirements for a certain species using trade-off analysis for different protection objectives; and recommending environmental flows in the estuary considering the compatibility and conflict of freshwater requirements for different species. This approach was tested using a case study in the Yellow River Estuary. Recommended environmental flows were determined by incorporating the requirements of four types of species into the assessments. Greater variability in freshwater inflows could be incorporated into the recommended environmental flows considering the adaptation of potential suitable habitats with variations in the flow regime. Environmental flow allocations should be conducted in conjunction with land use conflict management in estuaries. Based on the results presented here, the proposed approach offers flexible assessment of environmental flow for aquatic ecosystems that may be subject to future change.

Environmental impact assessment - a selected bibliography

International Nuclear Information System (INIS)

Lawson, W.J.

1989-01-01

This bibliography of literature relevant to the environmental impact assessment process is essentially a list of material dealing with the environmental impact assessment process held by Griffith University Library. The list is however well supplemented with citations of material not held in the Griffith University Library. Some economic and social impact assessment citations have been included in the bibliography, as the the environmental impact assessment concept has been interpreted very broadly. The citations are arranged according to broad subject areas, such as methodology, critical reviews, social impacts etc. Citations in each of these subject areas, which are listed in the table of contents, are identified by prefixes which are given in parentheses before the subjects headings. Within each subject area the citations are arragend in alphabetic author sequence

Environmental Assessment of R&D Programmes

DEFF Research Database (Denmark)

Lyhne, Ivar; Byriel, Inger Pihl

2013-01-01

cause severe negative environmental impacts. This paper presents an innovative environmental assessment practice on R&D programmes in Denmark. It reports on the challenges and experiences of assessing the Danish R&D programme ForskEL, which promotes R&D projects within the electricity sector......Despite their important role in shaping the technologies of the future, public research and development (R&D) programmes are rarely based on systematic assessments of the environmental effects. R&D programmes thus allocate a huge amount of financial resources to projects, which potentially may....... The programme is characterised by uncertainty about impacts and incomparable project types and technologies. A methodology for dealing with these challenges is presented, and experiences from a testing of the methodology on the 2012 programme are reflected upon. Finally the assessment is discussed in terms...

A comparative life cycle assessment of marine power systems

International Nuclear Information System (INIS)

Ling-Chin, Janie; Roskilly, Anthony P.

2016-01-01

Highlights: • Correlation among resources, emissions, key components and processes was attained. • Environmental benefits of innovative power systems were verified. • New-build system showed a great advantage over retrofit and conventional systems. • Relative contribution of significant components remained or became more profound. • Influence of fuel consumption quantity over the estimates varied with impact types. - Abstract: Despite growing interest in advanced marine power systems, knowledge gaps existed as it was uncertain which configuration would be more environmentally friendly. Using a conventional system as a reference, the comparative life cycle assessment (LCA) study aimed to compare and verify the environmental benefits of advanced marine power systems i.e. retrofit and new-build systems which incorporated emerging technologies. To estimate the environmental impact attributable to each system, a bottom-up integrated system approach was applied, i.e. LCA models were developed for individual components using GaBi, optimised operational profiles and input data standardised from various sources. The LCA models were assessed using CML2001, ILCD and Eco-Indicator99 methodologies. The estimates for the advanced systems were compared to those of the reference system. The inventory analysis results showed that both retrofit and new-build systems consumed less fuels (8.28% and 29.7% respectively) and released less emissions (5.2–16.6% and 29.7–55.5% respectively) during operation whilst more resources were consumed during manufacture, dismantling and the end of life. For 14 impact categories relevant to global warming, acidification, eutrophication, photochemical ozone creation and PM/respiratory inorganic health issues, reduction in LCIA results was achieved by retrofit (2.7–6.6%) and new-build systems (35.7–50.7%). The LCIA results of the retrofit system increased in ecotoxicity (1–8%), resource depletion (1–2%) and fossil fuel depletion

Catalyst-Free Biodiesel Production Methods: A Comparative Technical and Environmental Evaluation

Directory of Open Access Journals (Sweden)

Oseweuba Valentine Okoro

2018-01-01

Full Text Available In response to existing global focus on improved biodiesel production methods via highly efficient catalyst-free high temperature and high pressure technologies, this study considered the comparative study of catalyst-free technologies for biodiesel production as an important research area. In this study, therefore, catalyst-free integrated subcritical lipid hydrolysis and supercritical esterification and catalyst-free one step supercritical transesterification processes for biodiesel production have been evaluated via undertaking straight forward comparative energetic and environmental assessments. Energetic comparisons were undertaken after heat integration was performed since energy reduction has favourable effects on the environmental performance of chemical processes. The study confirmed that both processes are capable of producing biodiesel of high purity with catalyst-free integrated subcritical lipid hydrolysis and supercritical esterification characterised by a greater energy cost than catalyst-free one step supercritical transesterification processes for an equivalent biodiesel productivity potential. It was demonstrated that a one-step supercritical transesterification for biodiesel production presents an energetically more favourable catalyst-free biodiesel production pathway compared to the integrated subcritical lipid hydrolysis and supercritical esterification biodiesel production process. The one-step supercritical transesterification for biodiesel production was also shown to present an improved environmental performance compared to the integrated subcritical lipid hydrolysis and supercritical esterification biodiesel production process. This is because of the higher potential environment impact calculated for the integrated subcritical lipid hydrolysis and supercritical esterification compared to the potential environment impact calculated for the supercritical transesterification process, when all material and energy flows are

Environmental assessment of incinerator residue utilisation.

Science.gov (United States)

Toller, S; Kärrman, E; Gustafsson, J P; Magnusson, Y

2009-07-01

Incineration ashes may be treated either as a waste to be dumped in landfill, or as a resource that is suitable for re-use. In order to choose the best management scenario, knowledge is needed on the potential environmental impact that may be expected, including not only local, but also regional and global impact. In this study, A life cycle assessment (LCA) based approach was outlined for environmental assessment of incinerator residue utilisation, in which leaching of trace elements as well as other emissions to air and water and the use of resources were regarded as constituting the potential environmental impact from the system studied. Case studies were performed for two selected ash types, bottom ash from municipal solid waste incineration (MSWI) and wood fly ash. The MSWI bottom ash was assumed to be suitable for road construction or as drainage material in landfill, whereas the wood fly ash was assumed to be suitable for road construction or as a nutrient resource to be recycled on forest land after biofuel harvesting. Different types of potential environmental impact predominated in the activities of the system and the use of natural resources and the trace element leaching were identified as being relatively important for the scenarios compared. The scenarios differed in use of resources and energy, whereas there is a potential for trace element leaching regardless of how the material is managed. Utilising MSWI bottom ash in road construction and recycling of wood ash on forest land saved more natural resources and energy than when these materials were managed according to the other scenarios investigated, including dumping in landfill.

Public participation in Malawi's environmental impact assessment ...

African Journals Online (AJOL)

Since the adoption of the Environmental Management Act of 1996, Malawi has been using environmental impact assessment (EIA) as a tool for predicting and assessing the impact of development projects on the environment. This study assessed the extent of public participation in Malawi's EIA process. Desktop study of ...

Comparative evaluation of the US Environmental Protection Agency's and the Oak Ridge Institute for Science and Education's environmental survey and site assessment program field sampling procedures

International Nuclear Information System (INIS)

Vitkus, T.J.; Bright, T.L.; Roberts, S.A.

1997-10-01

At the request of the U.S. Nuclear Regulatory Commission's (NRC's) Headquarters Office, the Environmental Survey and Site Assessment Program (ESSAP) of the Oak Ridge Institute for Science and Education (ORISE) compared the documented procedures that the U.S. Environmental Protection Agency (EPA) and ESSAP use for collecting environmental samples. The project objectives were to review both organizations' procedures applicable to collecting various sample matrices, compare the procedures for similarities and differences, and then to evaluate the reason for any identified procedural differences and their potential impact on ESSAP's sample data quality. The procedures reviewed included those for sampling surface and subsurface soil, surface and groundwater, vegetation, air, and removable surface contamination. ESSAP obtained copies of relevant EPA documents and reviewed and prepared a tabulated summary of each applicable procedure. The methods for collecting and handling each type of sample were evaluated for differences, and where these were identified, the significance and effect of the differences on analytical quality were determined. The results of the comparison showed that, overall, the procedures and methods that EPA and ESSAP use for sample collection are very similar. The number of minor differences noted were the result of restrictions or procedures necessary to ensure sample integrity and prevent the introduction of interfering compounds when samples are to be analyzed for chemical parameters. For most radio nuclide analyses, these additional procedures are not necessary. Another item noted was EPA's inclusion of steps that reduce the potential for sample cross-contamination by preparing (dressing) a location prior to collecting a sample or removing a portion of a sample prior to containerization

The inter-agency joint project decades: a framework for comparatively assessing electricity generation options and strategies

International Nuclear Information System (INIS)

Bertel, E.

1995-01-01

The environmental and health-related impacts of different energy systems are become some the important issues for the years to come. The fact that all fuel chains for the electricity generation system involve some health risks and lead to some environmental impacts and that many countries have the need to define their energy programmes for the coming decades, have arouse a growing interest in the application of improved data, tools and techniques for comparative assessment of different electricity systems, and more specially for theirs environmental and human health aspects. The need to design and implement sustainable strategies in the electricity sector has been stressed in many international fora. The essential goal of sustainable strategies is to provide the energy services required for supporting economic growth and improving quality of life, especially in developing countries, while minimizing the health and environmental impacts of human activities. The inter-agency joint project on data bases and methodologies for comparative assessment of different energy sources for electricity generation (DECADES) has been established with the objective of enhancing capabilities for incorporating health and environmental issues in the comparative assessment of different electricity generation chains and strategies in the process of planning and decision making for the electricity sector. This project is carried out jointly by a number of international organizations. In order to cover the main issues to be addressed for carrying out this comparative assessment the DECADES project focuses on: technology inventory, development of an integrated software package for electricity system analysis and expansion planning, compilation and review of methodologies, analytical models and computerized tools for comparative assessment, some case studies addressing specific national or regional issues. (author). 3 boxes

31 CFR 26.3 - Availability of Environmental Impact Assessment Summaries (EIA Summaries) and Environmental...

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Availability of Environmental Impact Assessment Summaries (EIA Summaries) and Environmental Impact Assessments (EIAs). 26.3 Section 26.3 Money and... DEVELOPMENT BANDS (MDBs) § 26.3 Availability of Environmental Impact Assessment Summaries (EIA Summaries) and...

Environmental impact assessment of alfalfa (Medicago sativa L.) hay production.

Science.gov (United States)

Bacenetti, Jacopo; Lovarelli, Daniela; Tedesco, Doriana; Pretolani, Roberto; Ferrante, Valentina

2018-09-01

On-farm production of hay and high-protein-content feed has several advantages such as diversification of on-farm cultivated crops, reduction of off-farm feed concentrates transported over long distances and a reduction in runoff during the winter season if grown crops are perennial. Among those crops cultivated for high-protein-content feed, alfalfa (Medicago sativa L.) is one of the most important in the Italian context. Nevertheless, up to now, only a few studies have assessed the environmental performance of alfalfa hay production. In this study, using the Life Cycle Assessment approach, the environmental impact of alfalfa hay production in Northern Italy was analyzed. More in detail, two production practices (without and with irrigation) were compared. The results show that alfalfa hay production in irrigated fields has a better environmental performance compared to non-irrigated production, mainly because of the yield increase achieved with irrigation. In particular, for the Climate Change impact category, the impact is equal to 84.54 and 80.21kgCO 2 /t of hay for the scenario without and with irrigation, respectively. However, for two impact categories (Ozone Depletion and Human Toxicity-No Cancer Effect), the impact of irrigation completely offsets the yield increase, and the cultivation practice without irrigation shows the best environmental performance. For both scenarios, the mechanization of harvest is the main environmental hotspot, mostly due to fuel consumption and related combustion emissions. Wide differences were highlighted by comparing the two scenarios with the Ecoinvent process of alfalfa hay production; these differences are mostly due to the cultivation practice and, in particular, to the more intensive fertilization in Swiss production. Copyright © 2018 Elsevier B.V. All rights reserved.

The meaning of results. Understanding comparative risk assessments of energy options

International Nuclear Information System (INIS)

Wilson, R.; Holland, M.; Rabl, A.; Dreicer, M.

1999-01-01

Results of comparative risk assessments can be used for a range of potential applications: choice and balance of technologies for strategic energy planning; choice of a new power plant; optimal dispatching of existing plants; optimization of regulations (emission limits, environmental quality objectives such as air quality limits, tradable permits, pollution taxes); accounting for climate change. When reporting the results of comparative risk assessment, a number of factors should be clear: precise nature of the energy system being assessed; what has been excluded from the analysis; sources of data used in assessment; assumptions that have been made; and what the analysts and other experts have regarded as the key sensitivities in the analysis. If all factors are addressed, the results of comparative risk assessment will prove to be an essential resource for making the best decisions about energy options and policies

Environmental Impact Assessment in Antarctica

NARCIS (Netherlands)

Bastmeijer, C.J.; Roura, R.; Bastmeijer, K.; Koivurova, T.

2008-01-01

This publication focuses on the instrument of Environmental Impact Assessment (EIA) that has been developed within the Antarctic Treaty System (ATS) as one of the tools to promote environmental protection. The states involved in the ATS already recognized the importance of this instrument in 1975

Setting boundaries of participation in environmental impact assessment

Energy Technology Data Exchange (ETDEWEB)

Salomons, Geoffrey H., E-mail: gsalomon@ualberta.ca [University of Alberta, Department of Political Science, 10-16 Henry Marshall Tory Building, University of Alberta, Edmonton, AB T6G 2H4 (Canada); Hoberg, George, E-mail: george.hoberg@ubc.ca [University of British Columbia, Faculty of Forestry, Forest Sciences Centre 2045, 2424 Main Mall, Vancouver, British Columbia V6T 1Z4 (Canada)

2014-02-15

Public participation processes are touted as an effective way to increase the capacity and legitimacy of environmental assessment and the regulatory process that rely on them. Recent changes to the Canadian environmental assessment process narrowed the criteria for who can participate in environmental assessments from any who were interested to those who were most directly affected. This article examines the potential consequences of this change by exploring other areas of Canadian regulatory law where a similar directed affected test has been applied. This new standard risks institutionalizing the long-understood representational bias confronted by more diffuse interest like environmental protection. Restricting participation to the “directly affected” is far too narrow a test for processes like environmental assessment that are designed to determine the public interest. -- Highlights: • Public participation can improve the legitimacy of environmental assessments. • New Canadian rules narrow the range of eligible participants. • Similar rules in Alberta have excluded environmental representation. • The new rules may institutionalize bias against more diffuse interests. • Restricting participation to the “directly affected” is far too narrow.

Setting boundaries of participation in environmental impact assessment

International Nuclear Information System (INIS)

Salomons, Geoffrey H.; Hoberg, George

2014-01-01

Public participation processes are touted as an effective way to increase the capacity and legitimacy of environmental assessment and the regulatory process that rely on them. Recent changes to the Canadian environmental assessment process narrowed the criteria for who can participate in environmental assessments from any who were interested to those who were most directly affected. This article examines the potential consequences of this change by exploring other areas of Canadian regulatory law where a similar directed affected test has been applied. This new standard risks institutionalizing the long-understood representational bias confronted by more diffuse interest like environmental protection. Restricting participation to the “directly affected” is far too narrow a test for processes like environmental assessment that are designed to determine the public interest. -- Highlights: • Public participation can improve the legitimacy of environmental assessments. • New Canadian rules narrow the range of eligible participants. • Similar rules in Alberta have excluded environmental representation. • The new rules may institutionalize bias against more diffuse interests. • Restricting participation to the “directly affected” is far too narrow

Institutional Assessment of Environmentally Oriented Subsoil Use

Directory of Open Access Journals (Sweden)

Irina Gennadyevna Polyanskaya

2017-06-01

Full Text Available The article solves two relevant problems related to the implementation of the institutional assessment of environmentally oriented subsoil use: 1 the definition of the ‘environmental security’ and 2 the determination of the development level of institutional bases of environmentally oriented subsoil use including the institutional capacity of subsoil use and institutional capacity of environmental security. The article shows an analysis of the existing definitions of “environmental security” and offers the own one. Despite the significant national and foreign experience in the institutional capacity assessment of various processes, there are still some difficulties in defining and measuring the institutional capacity. We eliminate these difficulties by employing 1 original factors, previously identified, and the content of the “institutional capacity” term; 2 quality characteristics for the institutional capacity assessment of the process regulated at the macroeconomic level, and 3 a consistent methodological tool for the institutional assessment of environmentally oriented subsoil use. The study is based on the hypothesis of the necessity of legal and discreet state intervention in the process of subsoil use. Therefore, we identify the evaluation indicator of state regulation in the environmentally oriented subsoil use as the institutional capacity level calculated by using the fuzzy-set theory. As a result, the institutional capacity levels of the environmentally oriented subsoil use have been defined for both the transport corridor «Arctic-Central Asia» and for the countries composing it. The obtained values of the assessment of institutional capacity levels of the environmentally oriented subsoil use can serve as a basis for identifying the vector of its increase

Disappearing rivers — The limits of environmental assessment for hydropower in India

International Nuclear Information System (INIS)

Erlewein, Alexander

2013-01-01

The mountain rivers of the Indian Himalaya possess a vast potential for hydropower generation. After decades of comparatively modest development recent years have seen a major intensification in the construction of new hydropower dams. Although increasingly portrayed as a form of renewable energy generation, hydropower development may lead to extensive alterations of fluvial systems and conflicts with resource use patterns of local communities. To appraise and reduce adverse effects is the purpose of statutory Environmental Impact Assessments (EIA) and corresponding mitigation plans. However, in the light of ambitious policies for hydropower expansion conventional approaches of environmental assessment are increasingly challenged to keep up with the intensity and pace of development. This paper aims to explore the systemic limitations of environmental assessment for hydropower development in the Indian state of Himachal Pradesh. Based on a qualitative methodology involving interviews with environmental experts, document reviews and field observations the study suggests that the current practice of constraining EIAs to the project level fails to address the larger effects of extensive hydropower development. Furthermore, it is critically discussed as to what extent the concept of Strategic Environmental Assessment (SEA) might have the potential to overcome existing shortcomings

A Study on improvement of environmental assessment system in social, economic, and environmental sectors

Energy Technology Data Exchange (ETDEWEB)

Nam, Young Sook; Koo, Doh Wan; Keum, Kee Yong [Korea Environment Institute, Seoul (Korea)

1998-12-01

The environmental assessment system is assessed as a mechanism that can achieve the goal for environmental policy in 21st century. As it can evaluate social and economic feasibility of large-scale development program, this system can achieve a sustainable society by mitigating social conflicts arising from environmental problems. For making the environmental assessment system substantial, this study was implemented by the need of improvement of the system, by analyzing problems of social, economic, and environmental evaluation, which is implemented under the present system. 44 refs., 1 fig., 25 tabs.

Preliminary environmental site assessments in New York City

International Nuclear Information System (INIS)

Lundy, P.; Gasson, D.R.; Longendyke, S.T.

1991-01-01

Preliminary Environmental Site Assessments are often performed prior to real estate transactions or refinancing. These assessments are typically performed for real estate buyers, sellers and lending institutions. Undertaking a Preliminary Environmental Site Assessment in New York City can often be quite complex and time-consuming. This is due, in part, to the age and density of buildings in the city as well as the myriad of regulatory agencies with jurisdiction over environmental issues. This paper will discuss how environmental assessments are performed with a special emphasis on building in New York City. In includes hazardous wastes management for Radon, PCB's and asbestos

A proposed tool to integrate environmental and economical assessments of products

International Nuclear Information System (INIS)

Senthil, Kumaran D.; Ong, S.K.; Nee, A.Y.C.; Tan, Reginald B.H.

2003-01-01

An attempt has been made to interpret the outcomes of a Life Cycle Assessment (LCA) in terms of environmental costs. This attempt ensures the environmental accountability of the products while LCA ensures their eco-friendly nature. Keeping this as an objective, a Life Cycle Environmental Cost Analysis (LCECA) model was developed. This new tool incorporates costing into the LCA practice. This model prescribes a life cycle environmental cost model to estimate and correlate the effects of these costs in all the life cycle stages of the product. The newly developed categories of eco-costs are: costs of effluent treatment/control/disposal, environmental management systems, eco-taxes, rehabilitation, energy and savings of recycling and reuse strategies. The mathematical model of LCECA determines quantitative expressions between the total cost of products and the various eco-costs. The eco-costs of the alternatives are compared with the computational LCECA model. This method enables the environmental as well as the economic assessment of products, which leads to cost-effective, eco-friendly design of products

Environmental Impact Assessment and Space Activities

Science.gov (United States)

Viikari, L.

Environmental Impact Assessment (EIA) is a common tool for environment a l protection and management on Earth today, as prior assessment of the environmental consequences of planned activities. It is meant to provide the decision-makers with as comprehensive as possible information about the different environmental effects the proposed activity would entail, including alternative courses of action and the zero-alternative (i.e. the no action alternative). Additionally, plans for mitigation in respect of each alternative are to be outlined. The assessments take account of i.a. environmental impacts on ecosystems, diminution of aesthetic and scientific values, long-term or cumulative effects, as well as transfrontier implications. They also consider issues such as pollution control, environmental protection measures, reporting, post-project analysis, rehabilitation and so on. Also uncertainties in the assessment process are to be expressly presented. Most importantly, a common requirement also is that the results of the impact studies are presented in a way comprehensible to the g neral public,e too. Although the central aspect of the EIA is to provide the decision-makers with scientific information, the process also has other important implications. One of the most relevant of them is the involvement of those people potentially affected in some way by the proposed activity: most EIA systems require in some way the participation of the public, alongside with the relevant governmental authorities and other stake-holders. Such public involvement has various aims and goals: it may serve as a testimony to good governance in general, or be considered in more practical terms as improved planning, due to the concrete contribution of the public to the decision-making process. Obviously, it also is a tool for reducing conflict and developing wider support for the eventual decisions. In short, it enables the public to gain information about planned activities and influence

Predictions of models for environmental radiological assessment

International Nuclear Information System (INIS)

Peres, Sueli da Silva; Lauria, Dejanira da Costa; Mahler, Claudio Fernando

2011-01-01

In the field of environmental impact assessment, models are used for estimating source term, environmental dispersion and transfer of radionuclides, exposure pathway, radiation dose and the risk for human beings Although it is recognized that the specific information of local data are important to improve the quality of the dose assessment results, in fact obtaining it can be very difficult and expensive. Sources of uncertainties are numerous, among which we can cite: the subjectivity of modelers, exposure scenarios and pathways, used codes and general parameters. The various models available utilize different mathematical approaches with different complexities that can result in different predictions. Thus, for the same inputs different models can produce very different outputs. This paper presents briefly the main advances in the field of environmental radiological assessment that aim to improve the reliability of the models used in the assessment of environmental radiological impact. The intercomparison exercise of model supplied incompatible results for 137 Cs and 60 Co, enhancing the need for developing reference methodologies for environmental radiological assessment that allow to confront dose estimations in a common comparison base. The results of the intercomparison exercise are present briefly. (author)

Comparing the health and environmental hazards of different energy systems

Energy Technology Data Exchange (ETDEWEB)

Hamilton, L.D.

1982-01-01

Energy and environment can pose difficult challenges for policy makers and scientists. Assessing health impacts of different energy sources requires synthesis of research results from many different disciplines into a rational framework. Information is often scanty; qualitatively different risks, or energy systems with quite different end uses, must be put on a common footing. Risk-assessment methods reviewed include examples drawn from work of the Biomedical and Environmental Assessment Division at Brookhaven National Laboratory and elsewhere. Coal and nuclear fuel cycles are compared in respect to morbidity and mortality. Other cycles (oil, gas and renewables) are also examined. In broadening comparisons to include new technologies, one must include the impact of manufacturing the energy-producing devices as part of an expanded fuel cycle, via input-output methods. Input-output analysis allows comparisons of direct and system-wide impacts. Throughout the analysis, uncertainties must be explicitly recognized in the results, including uncertainty in validity of data and uncertainty in choice of appropriate models. No single method of comparative risk assessment is fully satisfactory; each has its limitations. By use of several methods progress has been made in understanding the relative impact of energy technologies.

Comparing the health and environmental hazards of different energy systems

International Nuclear Information System (INIS)

Hamilton, L.D.

1982-01-01

Energy and environment can pose difficult challenges for policy makers and scientists. Assessing health impacts of different energy sources requires synthesis of research results from many different disciplines into a rational framework. Information is often scanty; qualitatively different risks, or energy systems with quite different end uses, must be put on a common footing. Risk-assessment methods reviewed include examples drawn from work of the Biomedical and Environmental Assessment Division at Brookhaven National Laboratory and elsewhere. Coal and nuclear fuel cycles are compared in respect to morbidity and mortality. Other cycles (oil, gas and renewables) are also examined. In broadening comparisons to include new technologies, one must include the impact of manufacturing the energy-producing devices as part of an expanded fuel cycle, via input-output methods. Input-output analysis allows comparisons of direct and system-wide impacts. Throughout the analysis, uncertainties must be explicitly recognized in the results, including uncertainty in validity of data and uncertainty in choice of appropriate models. No single method of comparative risk assessment is fully satisfactory; each has its limitations. By use of several methods progress has been made in understanding the relative impact of energy technologies

36 CFR 220.7 - Environmental assessment and decision notice.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Environmental assessment and decision notice. 220.7 Section 220.7 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) COMPLIANCE § 220.7 Environmental assessment and decision notice. (a) Environmental assessment...

A weight of evidence framework for environmental assessments: Inferring quantities.

Science.gov (United States)

Suter, Glenn; Cormier, Susan; Barron, Mace

2017-11-01

The US Environmental Protection Agency (USEPA) has developed a generally applicable framework for a weight-of-evidence (WoE) process for deriving quantitative values from multiple estimates. These guidelines are intended for environmental assessments that require the generation of quantitative parameters such as degradation rates or that develop quantitative products such as criterion values or magnitudes of effects. The basic steps are to weigh evidence for the environmental quality to be quantified, generate the value by merging estimates or by identifying the best estimate, and weight the results to determine confidence in the numerical value. When multiple data sets or outputs of multiple models are available, it may be appropriate to weigh the evidence. Use of the framework to weigh multiple estimates may increase the accuracy of quantitative results compared to a single estimate from a default method. Its use can provide greater transparency compared to ad hoc weighing of evidence. Integr Environ Assess Manag 2017;13:1045-1051. Published 2017. This article is a US Government work and is in the public domain in the USA. Published 2017. This article is a US Government work and is in the public domain in the USA.

International conference on comparative assessments of solar power technologies

International Nuclear Information System (INIS)

Roy, A.

1994-02-01

Many regions in the world which lack fossil fuel resources but possess ample sunshine seek to identify near-term solar technologies capable of gradually replacing their fuel imports in cost-effective fashion. The conference addresses the following topics: technical and economical studies specifying their underlying basic assumption, methods and rules for evaluation in order to enable meaningful comparison between different technologies and systems. Detailed delineation of numerical and graphical representations, critical analysis and comparison between simulations, and test validity. Generalized performance indicators for systems and subsystems, problems of measuring and evaluating physical parameters, of terminology and conceptual tools for comparative evaluations. Advances in research development, engineering and field performance, including implications pertaining to comparative assessments and definitions of criteria and standards helpful to comparative evaluation. Assessments of the full (and hidden) cost of fossil energies as compared to solar, including environmental costs. Cost/benefit studies for remote versus centralized systems. (ed.)

Integrated Environmental Assessment Part III: ExposureAssessment

Energy Technology Data Exchange (ETDEWEB)

McKone, Thomas E.; Small, Mitchell J.

2006-06-01

Human exposure assessment is a key step in estimating the environmental and public health burdens that result chemical emissions in the life cycle of an industrial product or service. This column presents the third in a series of overviews of the state of the art in integrated environmental assessment - earlier columns described emissions estimation (Frey and Small, 2003) and fate and transport modeling (Ramaswami, et al., 2004). When combined, these first two assessment elements provide estimates of ambient concentrations in the environment. Here we discuss how both models and measurements are used to translate ambient concentrations into metrics of human and ecological exposure, the necessary precursors to impact assessment. Exposure assessment is the process of measuring and/or modeling the magnitude, frequency and duration of contact between a potentially harmful agent and a target population, including the size and characteristics of that population (IPCS, 2001; Zartarian, et al., 2005). Ideally the exposure assessment process should characterize the sources, routes, pathways, and uncertainties in the assessment. Route of exposure refers to the way that an agent enters the receptor during an exposure event. Humans contact pollutants through three routes--inhalation, ingestion, and dermal uptake. Inhalation occurs in both outdoor environments and indoor environments where most people spend the majority of their time. Ingestion includes both water and food, as well as soil and dust uptake due to hand-to-mouth activity. Dermal uptake occurs through contacts with consumer products; indoor and outdoor surfaces; the water supply during washing or bathing; ambient surface waters during swimming or boating; soil during activities such as work, gardening, and play; and, to a lesser extent, from the air that surrounds us. An exposure pathway is the course that a pollutant takes from an ambient environmental medium (air, soil, water, biota, etc), to an exposure medium

76 FR 44891 - Monsanto Co.; Availability of Petition, Plant Pest Risk Assessment, and Environmental Assessment...

Science.gov (United States)

2011-07-27

...] Monsanto Co.; Availability of Petition, Plant Pest Risk Assessment, and Environmental Assessment for... Monsanto petition, our plant pest risk assessment, and our draft environmental assessment for the proposed...-2817 before coming. The petition, draft environmental assessment, and plant pest risk assessment are...

Theory and Practice of Transboundary Environmental Impact Assessment

NARCIS (Netherlands)

Bastmeijer, C.J.; Koivurova, T.

2008-01-01

Environmental Impact Assessment (EIA) is a well-established instrument of environmental law and policy that aims to ensure that potential adverse environmental effects of human activities are assessed before decisions on such activities are made. The instrument is increasingly being applied in

Environmental and Economic Assessment of Electrothermal Swing Adsorption of Air Emissions from Sheet-Foam Production Compared to Conventional Abatement Techniques.

Science.gov (United States)

Johnsen, David L; Emamipour, Hamidreza; Guest, Jeremy S; Rood, Mark J

2016-02-02

A life-cycle assessment (LCA) and cost analysis are presented comparing the environmental and economic impacts of using regenerative thermal oxidizer (RTO), granular activated carbon (GAC), and activated carbon fiber cloth (ACFC) systems to treat gaseous emissions from sheet-foam production. The ACFC system has the lowest operational energy consumption (i.e., 19.2, 8.7, and 3.4 TJ/year at a full-scale facility for RTO, GAC, and ACFC systems, respectively). The GAC system has the smallest environmental impacts across most impact categories for the use of electricity from select states in the United States that produce sheet foam. Monte Carlo simulations indicate the GAC and ACFC systems perform similarly (within one standard deviation) for seven of nine environmental impact categories considered and have lower impacts than the RTO for every category for the use of natural gas to produce electricity. The GAC and ACFC systems recover adequate isobutane to pay for themselves through chemical-consumption offsets, whereas the net present value of the RTO is $4.1 M (20 years, $0.001/m(3) treated). The adsorption systems are more environmentally and economically competitive than the RTO due to recovered isobutane for the production process and are recommended for resource recovery from (and treatment of) sheet-foam-production exhaust gas. Research targets for these adsorption systems should focus on increasing adsorptive capacity and saturation of GAC systems and decreasing electricity and N2 consumption of ACFC systems.

Preliminary assessment of the environmental and health impacts of nuclear and coal fuel cycles

International Nuclear Information System (INIS)

Yang Yin; Chen Zhuzhou; Pan Ziqiang

1992-01-01

The paper reports on the environmental impacts and health effects of coal and nuclear fuel cycles in China. Data of interest for China are presented in a comparative manner; epidemiological investigations in Shanxi province indicate that the incidences of chronic pulmonary diseases and infant cogenital malformation were apparently increased over the fall-out areas of coal-fired power stations and coal mines. The authors outline the framework of a research project on environmental assessment of nuclear energy and other energy systems. The main features of the project are: environmental and health impacts of coal and nuclear fuel cycles, environmental impact assessment of coal transportation, cost accounting of nuclear and other energy sources, health risk assessment. (author). 24 refs, 4 tabs

Environmental Impact Assessment in the Visegrad Group countries

Energy Technology Data Exchange (ETDEWEB)

Gałaś, Slávka, E-mail: sgalas@geol.agh.edu.pl [AGH University of Science and Technology, Faculty of Geology, Geophysics and Environmental Protection, Department of Environmental Analysis, Cartography and Economic Geology Al. Mickiewicza 30, 30 059 Krakow (Poland); Gałaś, Andrzej, E-mail: pollux@geol.agh.edu.pl [AGH University of Science and Technology, Faculty of Geology, Geophysics and Environmental Protection, Department of Environmental Analysis, Cartography and Economic Geology Al. Mickiewicza 30, 30 059 Krakow (Poland); Zeleňáková, Martina, E-mail: martina.zelenakova@tuke.sk [Technical University of Košice, Faculty of Civil Engineering, Institute of Environmental Engineering, Vysokoškolská 4, 042 00 Košice (Slovakia); Zvijáková, Lenka, E-mail: lenkazvijakova@gmail.com [Technical University of Košice, Faculty of Civil Engineering, Institute of Environmental Engineering, Vysokoškolská 4, 042 00 Košice (Slovakia); Fialová, Jitka, E-mail: jitka.fialova@mendelu.cz [Mendel University in Brno, Faculty of Forestry and Wood Technology, Department of Landscape Management, Zemědělská 3, 613 00 Brno (Czech Republic); and others

2015-11-15

Highlights: • Comparison and evaluation of EIA systems in the V4 countries are presented. • Strengths and weaknesses of EIA systems based on a questionnaire survey are stated. • The function and efficiency of the EIA application in the V4 countries are analysed. • Irregularities and shortcomings of EIA systems in the V4 should be eliminated. The Environmental Impact Assessment Directive (EIA Directive) has created a reference framework for the implementation of the system of Environmental Impact Assessment (EIA) into the legal systems of the Member States of the European Union, including the countries belonging to the Visegrad Group (V4): Poland, Slovakia, the Czech Republic and Hungary. The Directive was the basis for the introduction of compulsory stages of the EIA process in the V4. The stages were then adapted to national requirements, including thresholds of the qualifying criteria of projects at the screening and scoping stages. The EIA system in the analysed countries has been growing, changing and being modified together with the political and economic changes of the last 30 years. Although all Visegrad Group countries are members of the EU and should harmonize the provisions of the EIA Directive and its amendments, there still exist singularities in each country's national EIA legislation, in terms of complementarities among the V4 countries, access to information resources, protection of natural resources, mitigation of socio-environmental impacts, or transboundary impact assessment. The article compares and evaluates the EIA systems in the four countries, specifies similarities and differences in the implementation of administrative proceedings and points out opportunities to strengthen the system. It presents selected results of a study conducted in 2013 within the framework of the international project “Assessment of the quality of the environment in the V4 Countries” (AQE V4). This paper indicates examples of good practice in the EIA

Environmental Impact Assessment in the Visegrad Group countries

International Nuclear Information System (INIS)

Gałaś, Slávka; Gałaś, Andrzej; Zeleňáková, Martina; Zvijáková, Lenka; Fialová, Jitka

2015-01-01

Highlights: • Comparison and evaluation of EIA systems in the V4 countries are presented. • Strengths and weaknesses of EIA systems based on a questionnaire survey are stated. • The function and efficiency of the EIA application in the V4 countries are analysed. • Irregularities and shortcomings of EIA systems in the V4 should be eliminated. The Environmental Impact Assessment Directive (EIA Directive) has created a reference framework for the implementation of the system of Environmental Impact Assessment (EIA) into the legal systems of the Member States of the European Union, including the countries belonging to the Visegrad Group (V4): Poland, Slovakia, the Czech Republic and Hungary. The Directive was the basis for the introduction of compulsory stages of the EIA process in the V4. The stages were then adapted to national requirements, including thresholds of the qualifying criteria of projects at the screening and scoping stages. The EIA system in the analysed countries has been growing, changing and being modified together with the political and economic changes of the last 30 years. Although all Visegrad Group countries are members of the EU and should harmonize the provisions of the EIA Directive and its amendments, there still exist singularities in each country's national EIA legislation, in terms of complementarities among the V4 countries, access to information resources, protection of natural resources, mitigation of socio-environmental impacts, or transboundary impact assessment. The article compares and evaluates the EIA systems in the four countries, specifies similarities and differences in the implementation of administrative proceedings and points out opportunities to strengthen the system. It presents selected results of a study conducted in 2013 within the framework of the international project “Assessment of the quality of the environment in the V4 Countries” (AQE V4). This paper indicates examples of good practice in the EIA

Environmental Tools and Radiological Assessment

Science.gov (United States)

This presentation details two tools (SADA and FRAMES) available for use in environmental assessments of chemicals that can also be used for radiological assessments of the environment. Spatial Analysis and Decision Assistance (SADA) is a Windows freeware program that incorporate...

Relation of Environmental Impact Assessment (EIA and Strategic Environmental Assessment (SEA and the Importance of Strategic Environmental Assessment in Landscape Planning Process

Directory of Open Access Journals (Sweden)

Gizem CENGİZ GÖKÇE

2015-07-01

Full Text Available The main goal in the countries which have not completed their development progress is industrialization and development just as soon as possible. Therefore, negative effects of industrialization and development on envi ronment and/or nature cannot be mostly discussed adequately. One of the planning approach instruments that targets sustainability, Environmental Impact Assessment (EIA is used in many countries effectively. But in recent years, that has understood; EIA is an impact assessment instrument that contains defensive preventions only on the basis of projects and this situation has caused some concerns against EIA. In this direction, Strategical Environmental Assessment (SEA exists as the final point of the instruments which are formed to provide sustainable development . In this study; the importance and the requirement of effectively taking a role of landscape architectures that have ecological based job, in the SEA workings which isn’t have got a legal status in Turkey yet, are emphasized by reviewing the relations between EIA and SEA concepts.

Electricity, health and the environment: Comparative assessment in support of decision making. Proceedings of a symposium

International Nuclear Information System (INIS)

1996-01-01

The main objective of the Symposium was to enhance and strengthen information sharing and co-operation between interested and affected parties in the field of electricity demand analysis and supply planning, aiming at implementing sustainable policies in the power sector, taking into account economic, social, health and environmental aspects. To meet this objective, the Symposium sessions addressed the following topics: key issues in the decision making process; assessment of health and environmental impacts; integrated framework for comparative assessment; implementation of comparative assessment; country case studies; and comparative assessment in decision making. A closing round table focused on challenges for international co-operation aiming at implementation of sustainable electricity policies. In addition to the main sessions, poster presentations illustrated results from comparative assessment studies carried out in different countries, and software demonstration provided opportunities for participants to gain information about state of the art computer tools, databases and analytical models that are available for use in decision support studies. Refs, figs, tabs

Integrated environmental and economic assessment of waste management systems

DEFF Research Database (Denmark)

Martinez Sanchez, Veronica

in the “Optimization approach” the scenarios are the results of an optimization process. • The cost approach describes cost principles and level of LCA integration. Conventional and Environmental LCCs are financial assessments, i.e. include marketed goods/services, but while Environmental LCCs include environmental...... assessment of SWM systems alongside environmental impacts assessment to take budget constrains into account. In light of the need for combined environmental and economic assessment of SWM, this PhD thesis developed a consistent and comprehensive method for integrated environmental and economic assessment...... of SWM technologies and systems. The method resulted from developing further the generic Life Cycle Costing (LCC) framework suggested by Hunkeler et al. (2008) and Swarr et al. (2011) to apply it on the field of SWM. The method developed includes: two modelling approaches (Accounting and Optimization...

Building better environmental risk assessments

Directory of Open Access Journals (Sweden)

Raymond eLayton

2015-08-01

Full Text Available Risk assessment is a reasoned, structured approach to address uncertainty based on scientific and technical evidence. It forms the foundation for regulatory decision making, which is bound by legislative and policy requirements, as well as the need for making timely decisions using available resources. In order to be most useful, environmental risk assessments (ERA for genetically modified (GM crops should provide consistent, reliable, and transparent results across all types of GM crops, traits, and environments. The assessments must also separate essential information from scientific or agronomic data of marginal relevance or value for evaluating risk and complete the assessment in a timely fashion. Challenges in conducting ERAs differ across regulatory systems – examples are presented from Canada, Malaysia, and Argentina. One challenge faced across the globe is the conduct of risk assessments with limited resources. This challenge can be overcome by clarifying risk concepts, placing greater emphasis on data critical to assess environmental risk (for example, phenotypic and plant performance data rather than molecular data, and adapting advances in risk analysis from other relevant disciplines.

Building Better Environmental Risk Assessments

Science.gov (United States)

Layton, Raymond; Smith, Joe; Macdonald, Phil; Letchumanan, Ramatha; Keese, Paul; Lema, Martin

2015-01-01

Risk assessment is a reasoned, structured approach to address uncertainty based on scientific and technical evidence. It forms the foundation for regulatory decision-making, which is bound by legislative and policy requirements, as well as the need for making timely decisions using available resources. In order to be most useful, environmental risk assessments (ERAs) for genetically modified (GM) crops should provide consistent, reliable, and transparent results across all types of GM crops, traits, and environments. The assessments must also separate essential information from scientific or agronomic data of marginal relevance or value for evaluating risk and complete the assessment in a timely fashion. Challenges in conducting ERAs differ across regulatory systems – examples are presented from Canada, Malaysia, and Argentina. One challenge faced across the globe is the conduct of risk assessments with limited resources. This challenge can be overcome by clarifying risk concepts, placing greater emphasis on data critical to assess environmental risk (for example, phenotypic and plant performance data rather than molecular data), and adapting advances in risk analysis from other relevant disciplines. PMID:26301217

Building Better Environmental Risk Assessments.

Science.gov (United States)

Layton, Raymond; Smith, Joe; Macdonald, Phil; Letchumanan, Ramatha; Keese, Paul; Lema, Martin

2015-01-01

Risk assessment is a reasoned, structured approach to address uncertainty based on scientific and technical evidence. It forms the foundation for regulatory decision-making, which is bound by legislative and policy requirements, as well as the need for making timely decisions using available resources. In order to be most useful, environmental risk assessments (ERAs) for genetically modified (GM) crops should provide consistent, reliable, and transparent results across all types of GM crops, traits, and environments. The assessments must also separate essential information from scientific or agronomic data of marginal relevance or value for evaluating risk and complete the assessment in a timely fashion. Challenges in conducting ERAs differ across regulatory systems - examples are presented from Canada, Malaysia, and Argentina. One challenge faced across the globe is the conduct of risk assessments with limited resources. This challenge can be overcome by clarifying risk concepts, placing greater emphasis on data critical to assess environmental risk (for example, phenotypic and plant performance data rather than molecular data), and adapting advances in risk analysis from other relevant disciplines.

Comparative assessment and management of the health and environmental impacts of energy systems. General framework and preliminary results for the nuclear fuel cycle

Energy Technology Data Exchange (ETDEWEB)

Rostron, W; Schneider, T; Thieme, M; Dreicer, M

1992-06-01

The comparison of the effects of electricity producing systems is of growing importance in decision-making processes for energy planning. This report documents the preliminary results of a project for the CEC-DG XII Radiation Protection Programme on the comparative assessment and management of the health and environmental impacts of energy systems. The work reported in this document has also been supported by EDF - Mission Environnement. In order to profit from the comparative studies already existing, some of the most important ones were surveyed. The aim of these past energy comparison studies was mainly to obtain a global measure of the risks associated with an energy cycle, with a view to ranking the various electricity production systems; but this is now recognised as merely an academic exercise, with a limited impact in decision-making. For energy planning the development of a multi-dimensional approach seems more suitable, as this allows the different types of indicators and measures needed to assess the risks of different energy cycles to be compared. From the past studies it has been seen that health indicators are generally well established, but a weakness is noted with respect to indicators of environmental impacts. This remains a difficult subject, and until such indicators are established, surrogates like concentrations in the environment will have to be used, or qualitative comparisons must suffice. This report presents a general framework allowing for consistent comparisons between different energy systems. The key issues discussed are: assessment by fuel cycle, consideration of the dimensions of time and space, the impact pathway approach for assessing risk, and coherent indicators that can be used to measure the impacts. First results are presented for four activities of the nuclear fuel cycle according to the approach developed: (1) the construction and dismantling of a 900 MWe pressurized water reactor, (2) the transportation of materials between

Discussion of some issues in assessing nuclear and radiation environmental impacts and in related assessment

International Nuclear Information System (INIS)

Pan Ziqiang

1998-01-01

The author discusses some noticeable issues in drafting assessment report of nuclear and radiation environmental impacts and relevant aspects needed to be considered from the point of view of comprehensive environmental assessment. The considerable issue are principles of radioactive waste management, optimization of radiation protection and collective dose, and uncertainty of the assessment. Implementing reporting system on assessment of nuclear and radiation environmental impacts would improve environmental protection for nuclear and radiation facilities. However, trade's, regional , country and global assessment of environmental impacts has to be enhanced. For this purpose, it is necessary to develop methodology of qualitative and quantitative comprehensive assessment

Environmental risk assessment system for phosphogypsum tailing dams.

Science.gov (United States)

Sun, Xin; Ning, Ping; Tang, Xiaolong; Yi, Honghong; Li, Kai; Zhou, Lianbi; Xu, Xianmang

2013-01-01

This paper may be of particular interest to the readers as it provides a new environmental risk assessment system for phosphogypsum tailing dams. In this paper, we studied the phosphogypsum tailing dams which include characteristics of the pollution source, environmental risk characteristics and evaluation requirements to identify the applicable environmental risk assessment methods. Two analytical methods, that is, the analytic hierarchy process (AHP) and fuzzy logic, were used to handle the complexity of the environmental and nonquantitative data. Using our assessment method, different risk factors can be ranked according to their contributions to the environmental risk, thereby allowing the calculation of their relative priorities during decision making. Thus, environmental decision-makers can use this approach to develop alternative management strategies for proposed, ongoing, and completed PG tailing dams.

Ecological risk assessment as a framework for environmental impact assessments

CSIR Research Space (South Africa)

Claassen, Marius

1999-01-01

Full Text Available Environmental impact assessments in South Africa are usually conducted according to the integrated environmental management (IEM) procedure. The preliminary investigation reported here, indicated that most of the ecological requirements specified...

Radiation safety assessment and development of environmental radiation monitoring technology

CERN Document Server

Choi, B H; Kim, S G

2002-01-01

The Periodic Safety Review(PSR) of the existing nuclear power plants is required every ten years according to the recently revised atomic energy acts. The PSR of Kori unit 1 and Wolsong unit 1 that have been operating more than ten years is ongoing to comply the regulations. This research project started to develop the techniques necessary for the PSR. The project developed the following four techniques at the first stage for the environmental assessment of the existing plants. 1) Establishment of the assessment technology for contamination and accumulation trends of radionuclides, 2) alarm point setting of environmental radiation monitoring system, 3) Development of Radiation Safety Evaluation Factor for Korean NPP, and 4) the evaluation of radiation monitoring system performance and set-up of alarm/warn set point. A dynamic compartment model to derive a relationship between the release rates of gas phase radionuclides and the concentrations in the environmental samples. The model was validated by comparing ...

A comparative study on energetic, exergetic and environmental performance assessments of novel M-Cycle based air coolers for buildings

International Nuclear Information System (INIS)

Caliskan, Hakan; Dincer, Ibrahim; Hepbasli, Arif

2012-01-01

Highlights: ► Applying exergy, environment and sustainability analyses to the three (novel M-Cycle based) air coolers. ► Assessing energy and exergy efficiencies, environmental impact and sustainability. ► Proposing System II (using PV-based electricity) as the most environmentally friendly air cooler. ► Proposing System III (using coal-based electricity) as the most efficient air cooler. - Abstract: In this study, three various novel air coolers based on M-Cycle are evaluated using energy and exergy analyses based efficiency assessments along with environmental impact and sustainability parameters. The M-Cycle systems are considered to cool a building room air while their inlet air parameters are same, but outlet cooled air parameters are different. Systems I and III draw electricity directly taken from an electric grid in the building while System II, which is stand alone system, produces and draws electricity from its solar PV panels. In the energy analysis, wet bulb effectiveness, cooling capacity, Coefficient of Performance (energetic COP) and Primary Energy Ratio (PER) are found. In the exergy analysis, exergy input and output rates, exergy loss rate, exergy destruction rate, Exergetic Coefficient of Performance (COP ex ), Primary Exergy Ratio (PE x R) and exergy efficiency are obtained for six different dead state temperatures changing between 10 °C and 35 °C. Also, sustainability assessments of the systems are obtained using sustainability index (SI) tool for these various dead state temperatures. Finally, environmental assessments of the systems are calculated from their greenhouse gas (GHG) emissions (gCO 2 /kW h) due to their electricity consumptions. Maximum exergy efficiencies and sustainability assessments are found to be 35.13% and 1.5415 for System III and 34.94% and 1.5372 for System II, respectively. GHG emissions of the systems are calculated to be 2119.68 gCO 2 /day, 153.6 gCO 2 /day and 3840 gCO 2 /day for Systems I, II and III

75 FR 78994 - Notice of Intent To Prepare an Environmental Assessment, Request for Comments on Environmental...

Science.gov (United States)

2010-12-17

... Prepare an Environmental Assessment, Request for Comments on Environmental Issues, and Notice of Public...: Notice of intent to prepare an Environmental Assessment, request for comments on Environmental Issues... and/or special expertise with respect to environmental issues to formally cooperate with GSA in the...

Environmental impact assessment in the Nordic Countries

International Nuclear Information System (INIS)

Broden, K.; Palsson, S.E.; Poroddsson, P.

2000-12-01

A meeting on Environmental Impact Assessment has been held in Iceland, September 2-6, 2000. It was held within the framework of the project NKS/SOS-3 (Radioactive waste), subproject NKS/SOS-3.1 (Environmental Impact Assessment). The meeting included presentations, discussions and a study trip to the Egilsstadir and Myvatn districts. (au)

Comparative life cycle assessment of biodiesel and fossil diesel fuel

International Nuclear Information System (INIS)

Ceuterick, D.; Nocker, L. De; Spirinckx, C.

1999-01-01

Biofuels offer clear advantages in terms of greenhouse gas emissions, but do they perform better when we look at all the environmental impacts from a life cycle perspective. In the context of a demonstration project at the Flemish Institute for Technology Research (VITO) on the use of rapeseed methyl ester (RME) or biodiesel as automotive fuel, a life cycle assessment (LCA) of biodiesel and diesel was made. The primary concern was the question as to whether or not the biodiesel chain was comparable to the conventional diesel chain, from an environmental point of view, taking into account all stages of the life cycle of the two products. Additionally, environmental damage costs were calculated, using an impact pathway analysis. This paper presents the results of the two methods for evaluation of environmental impacts of RME and conventional diesel. Both methods are complementary and share the conclusion that although biodiesel has much lower greenhouse gas emissions, it still has significant impacts on other impact categories. The external costs of biodiesel are a bit lower compared to fossil diesel. For both fuels, external costs are significantly higher than the private production cost. (Author)

Life Cycle Assessment of Bio-diesel Production—A Comparative Analysis

Science.gov (United States)

Chatterjee, R.; Sharma, V.; Mukherjee, S.; Kumar, S.

2014-04-01

This work deals with the comparative analysis of environmental impacts of bio-diesel produced from Jatropha curcas, Rapeseed and Palm oil by applying the life cycle assessment and eco-efficiency concepts. The environmental impact indicators considered in the present paper include global warming potential (GWP, CO2 equivalent), acidification potential (AP, SO2 equivalent) and eutrophication potential (EP, NO3 equivalent). Different weighting techniques have been used to present and evaluate the environmental characteristics of bio-diesel. With the assistance of normalization values, the eco-efficiency was demonstrated in this work. The results indicate that the energy consumption of bio-diesel production is lowest in Jatropha while AP and EP are more in case of Jatropha than that of Rapeseed and Palm oil.

Performance of GPS-devices for environmental exposure assessment.

Science.gov (United States)

Beekhuizen, Johan; Kromhout, Hans; Huss, Anke; Vermeulen, Roel

2013-01-01

Integration of individual time-location patterns with spatially resolved exposure maps enables a more accurate estimation of personal exposures to environmental pollutants than using estimates at fixed locations. Current global positioning system (GPS) devices can be used to track an individual's location. However, information on GPS-performance in environmental exposure assessment is largely missing. We therefore performed two studies. First, a commute-study, where the commute of 12 individuals was tracked twice, testing GPS-performance for five transport modes and two wearing modes. Second, an urban-tracking study, where one individual was tracked repeatedly through different areas, focused on the effect of building obstruction on GPS-performance. The median error from the true path for walking was 3.7 m, biking 2.9 m, train 4.8 m, bus 4.9 m, and car 3.3 m. Errors were larger in a high-rise commercial area (median error=7.1 m) compared with a low-rise residential area (median error=2.2 m). Thus, GPS-performance largely depends on the transport mode and urban built-up. Although ~85% of all errors were 50 m. Modern GPS-devices are useful tools for environmental exposure assessment, but large GPS-errors might affect estimates of exposures with high spatial variability.

Road ecology in environmental impact assessment

International Nuclear Information System (INIS)

Karlson, Mårten; Mörtberg, Ulla; Balfors, Berit

2014-01-01

Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, and 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized

Road ecology in environmental impact assessment

Energy Technology Data Exchange (ETDEWEB)

Karlson, Mårten, E-mail: mkarlso@kth.se; Mörtberg, Ulla, E-mail: mortberg@kth.se; Balfors, Berit, E-mail: balfors@kth.se

2014-09-15

Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, and 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized

Operable Unit 3: Proposed Plan/Environmental Assessment for interim remedial action

International Nuclear Information System (INIS)

1993-12-01

This document presents a Proposed Plan and an Environmental Assessment for an interim remedial action to be undertaken by the US Department of Energy (DOE) within Operable Unit 3 (OU3) at the Fernald Environmental Management Project (FEMP). This proposed plan provides site background information, describes the remedial alternatives being considered, presents a comparative evaluation of the alternatives and a rationnale for the identification of DOE's preferred alternative, evaluates the potential environmental and public health effects associated with the alternatives, and outlines the public's role in helping DOE and the EPA to make the final decision on a remedy

Comparative assessment of spent nuclear fuel transportation routes using risk factors and a geographic information system

International Nuclear Information System (INIS)

Toth, D.M.

1996-01-01

The assessment of potential alternative routes was simplified through the use of six comparative risk factors evaluated using detailed, route-specific data. The route and environmental attributes varied strongly with location and were developed from national, state, and local sources. The six comparative factors were risk measures of incident-free transportation radiation exposure, radiological accident population exposure, nonradiological accidents, contamination of environmental sensitive areas, environmental justice for minority populations, and environmental justice for low-income populations. An assessment of four real North-Central Florida routes provided a sample implementation of the analysis tools and risk factors. The assessment routes, consisting of common beginning and end locations, included an interstate highway, a rural highway, a mostly urban highway, and a combination interstate highway with rural bypass. This route comparative assessment study predicted that the interstate highway, despite a higher population density, greater traffic volume, and greater number of vehicular fatality accidents, would present the lowest cumulative risk. On the contrary, the rural highway route, characterized as having the lowest population density, minimal vehicle traffic volume, and the lowest percentages of minority and low-income populations, displayed the highest cumulative risk measure. Factors contributing to the high risk for the rural highway route included greater route length, higher vehicular fatality accident rates per vehicle mile traveled, and the close proximity to environmentally sensitive areas. This route comparative assessment study predicted that the interstate highway, despite a higher population density, greater traffic volume, and greater number of vehicular fatality accidents, would present the lowest cumulative risk. On the contrary, the rural highway route, characterized as having the lowest population density, minimal vehicle traffic volume

On - Site Assessment Methods For Environmental Radioactivity

International Nuclear Information System (INIS)

Petrinec, B.; Babic, D.; Bituh, T.

2015-01-01

A method for the rapid determination of radioactivity in cases of release into the environment as well as in cases of nuclear/radiological accidents is described. These measurements would enable a direct risk assessment for humans and biota, without any sampling and at a considerably larger number of locations than in previous studies. Thus obtained, the substantially expanded dataset is expected to shed more light on the properties of environmental radioactivity both in the region studied and in other similar areas. Field measurements will be performed and samples of soil and biota will be collected in order to compare field results with laboratory measurements. Once the method has been validated, previously unexplored locations will be included in the study. Our measurements at numerous locations will also provide control values for comparison in cases of any unplanned or accidental radiological event. An assessment of the possible effects of radionuclide concentrations on the human food chain and biota will be performed within the appropriate models used worldwide exactly for this purpose. In this way, the project should contribute to regional, European, and global efforts towards understanding the radiological impact on ecosystems. Field measurements will also address certain issues in the environmental metrology of radioactive substances, e.g., simultaneous determination of activity concentrations and related dose rates. This will serve as a tool for rapid risk assessment in emergency situations. (author).

Technology needs assessment for DOE environmental restoration programs

International Nuclear Information System (INIS)

Duray, J.R.; Carlson, T.J.; Carpenter, C.E.; Cummins, L.E.; Daub, G.J.

1992-01-01

The 'Technology Needs Assessment Final Report' describes current and planned environmental restoration activity, identifies technologies intended to be used or under consideration, and ranks technology deficiencies in the U.S. Department of Energy's environmental restoration program. Included in the ranking are treatment technologies, characterization technologies, and non-technology issues that affect environmental restoration. Data used for the assessment was gathered during interviews in the spring of 1991 with DOE site personnel responsible for the environmental restoration work. (author)

An environmental life cycle assessment comparing Australian sugarcane with US corn and UK sugar beet as producers of sugars for fermentation

International Nuclear Information System (INIS)

Renouf, M.A.; Wegener, M.K.; Nielsen, L.K.

2008-01-01

Sugarcane is a highly suitable substrate for the production of bio-products. As well as producing high yields of sugar, much of the plant's fibre is also recovered and used as a source of renewable energy. A life cycle assessment (LCA) of sugarcane production and processing in Australia was performed to develop an environmental profile of sugarcane as a source of bio-products. The application examined was fermentation products from sugar. The sugarcane results were compared with results for other sugar producing crops-US corn and UK sugar beet-to gauge its relative environmental performance. The results show sugarcane to have an advantage in respect of energy input, greenhouse gas emissions and possibly acidification potential due to its high saccharide yield and the displacement of fossil fuels with surplus renewable energy from cane fibre (bagasse). However Australian sugarcane can exhibit high nitrous oxide emissions, which would reduce greenhouse gas advantages in some regions. For eutrophication, sugar beet provides advantages due to the avoided production of other agricultural crops displaced by the use of beet pulp as an animal feed. The three factors found to have the most influence on the environmental impacts of these agro-industrial systems were the commodities displaced by by-products, agricultural yields, and nitrogen use efficiency

An environmental life cycle assessment comparing Australian sugarcane with US corn and UK sugar beet as producers of sugars for fermentation

Energy Technology Data Exchange (ETDEWEB)

Renouf, M.A. [School of Geography, Planning and Architecture, The University of Queensland, Brisbane, QLD 4072 (Australia); CRC for Sugar Industry Innovation through Biotechnology, The University of Queensland, Brisbane, QLD 4072 (Australia); Wegener, M.K. [School of Natural and Rural Systems Management, The University of Queensland, QLD 4072 (Australia); CRC for Sugar Industry Innovation through Biotechnology, The University of Queensland, Brisbane, QLD 4072 (Australia); Nielsen, L.K. [Australian Institute of Bioengineering and Nanotechnology, The University of Queensland, Brisbane, QLD 4072 (Australia); CRC for Sugar Industry Innovation through Biotechnology, The University of Queensland, Brisbane, QLD 4072 (Australia)

2008-12-15

Sugarcane is a highly suitable substrate for the production of bio-products. As well as producing high yields of sugar, much of the plant's fibre is also recovered and used as a source of renewable energy. A life cycle assessment (LCA) of sugarcane production and processing in Australia was performed to develop an environmental profile of sugarcane as a source of bio-products. The application examined was fermentation products from sugar. The sugarcane results were compared with results for other sugar producing crops - US corn and UK sugar beet - to gauge its relative environmental performance. The results show sugarcane to have an advantage in respect of energy input, greenhouse gas emissions and possibly acidification potential due to its high saccharide yield and the displacement of fossil fuels with surplus renewable energy from cane fibre (bagasse). However Australian sugarcane can exhibit high nitrous oxide emissions, which would reduce greenhouse gas advantages in some regions. For eutrophication, sugar beet provides advantages due to the avoided production of other agricultural crops displaced by the use of beet pulp as an animal feed. The three factors found to have the most influence on the environmental impacts of these agro-industrial systems were the commodities displaced by by-products, agricultural yields, and nitrogen use efficiency. (author)

Environmental assessment of incinerator residue utilisation

OpenAIRE

Toller, Susanna; Kärrman, Erik; Gustafsson, Jon Petter; Magnusson, Y.

2009-01-01

Incineration ashes may be treated either as a waste to be dumped in landfill, or as a resource that is suit able for re-use. In order to choose the best management scenario, knowledge is needed on the potential environmental impact that may be expected, including not only local, but also regional and global impact. In this study. A life cycle assessment (LCA) based approach Was Outlined for environmental assessment of incinerator residue utilisation, in which leaching of trace elements as wel...

Environmental Safety and Health Analytical Laboratory, Pantex Plant, Amarillo, Texas. Final Environmental Assessment

International Nuclear Information System (INIS)

1995-06-01

The US Department of Energy (DOE) has prepared an Environmental Assessment (EA) of the construction and operation of an Environmental Safety and Health (ES ampersand H) Analytical Laboratory and subsequent demolition of the existing Analytical Chemistry Laboratory building at Pantex Plant near Amarillo, Texas. In accordance with the Council on Environmental Quality requirements contained in 40 CFR 1500--1508.9, the Environmental Assessment examined the environmental impacts of the Proposed Action and discussed potential alternatives. Based on the analysis of impacts in the EA, conducting the proposed action, construction of an analytical laboratory and demolition of the existing facility, would not significantly effect the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA) and the Council on Environmental Quality regulations in 40 CFR 1508.18 and 1508.27

Environmental implications of United States coal exports: a comparative life cycle assessment of future power system scenarios.

Science.gov (United States)

Bohnengel, Barrett; Patiño-Echeverri, Dalia; Bergerson, Joule

2014-08-19

Stricter emissions requirements on coal-fired power plants together with low natural gas prices have contributed to a recent decline in the use of coal for electricity generation in the United States. Faced with a shrinking domestic market, many coal companies are taking advantage of a growing coal export market. As a result, U.S. coal exports hit an all-time high in 2012, fueled largely by demand in Asia. This paper presents a comparative life cycle assessment of two scenarios: a baseline scenario in which coal continues to be burned domestically for power generation, and an export scenario in which coal is exported to Asia. For the coal export scenario we focus on the Morrow Pacific export project being planned in Oregon by Ambre Energy that would ship 8.8 million tons of Powder River Basin (PRB) coal annually to Asian markets via rail, river barge, and ocean vessel. Air emissions (SOx, NOx, PM10 and CO2e) results assuming that the exported coal is burned for electricity generation in South Korea are compared to those of a business as usual case in which Oregon and Washington's coal plants, Boardman and Centralia, are retrofitted to comply with EPA emissions standards and continue their coal consumption. Findings show that although the environmental impacts of shipping PRB coal to Asia are significant, the combination of superior energy efficiency among newer South Korean coal-fired power plants and lower emissions from U.S. replacement of coal with natural gas could lead to a greenhouse gas reduction of 21% in the case that imported PRB coal replaces other coal sources in this Asian country. If instead PRB coal were to replace natural gas or nuclear generation in South Korea, greenhouse gas emissions per unit of electricity generated would increase. Results are similar for other air emissions such as SOx, NOx and PM. This study provides a framework for comparing energy export scenarios and highlights the importance of complete life cycle assessment in

Implementation of the Leaching Environmental Assessment ...

Science.gov (United States)

LEAF provides a uniform and integrated approach for evaluating leaching from solid materials (e.g., waste, treated wastes such as by solidification/stabilization, secondary materials such as blast furnace slags, energy residuals such as coal fly ash, soil, sediments, mining and mineral processing wastes). Assessment using LEAF applies a stepwise approach that considers the leaching behavior of COPCs in response to chemical and physical factors that control and material properties across a range of plausible field conditions (US EPA, 2010). The framework provides the flexibility to tailor testing to site conditions and select the extent of testing based on assessment objectives and the level of detailed information needed to support decision-making. The main focus will be to discuss the implementation of LEAF in the US and the How to Guide that has recently been completed. To present the How To Guide for the implementation of the leaching environmental assessment framework to an international audience already familiar with comparable leaching tests in use in Europe. Will be meeting with European colleagues on their interest in expanding methods to include organics.

A Comparative Analysis of the Environmental Benefits of Drone-Based Delivery Services in Urban and Rural Areas

OpenAIRE

Jiyoon Park; Solhee Kim; Kyo Suh

2018-01-01

Unmanned aerial vehicles (UAV, drones) used as delivery vehicles have received increasing attention due to their mobility and accessibility to remote areas. The purpose of this study is to evaluate the environmental impacts of drone versus motorcycle delivery and to compare the expected environmental improvements due to drone delivery in urban and rural areas. In addition, the potential environmental contributions of electric motorcycles were assessed to determine the effects of introducing t...

Life cycle assessment of energy products: environmental impact assessment of biofuels; Oekobilanz von Energieprodukten: Oekologische Bewertung von Biotreibstoffen

Energy Technology Data Exchange (ETDEWEB)

Zah, R.; Boeni, H.; Gauch, M.; Hischier, R.; Lehmann, M.; Waeger, P.

2007-05-15

This final report for the Swiss Federal Office of Energy (SFOE) deals with the results of a study that evaluated the environmental impact of the entire production chain of fuels made from biomass and used in Switzerland. Firstly, the study supplies an analysis of the possible environmental impacts of biofuels that can be used as a basis for political decisions. Secondly, an environmental life cycle assessment (LCA) of various biofuels is presented. In addition, the impacts of fuel use are compared with other uses for bioenergy such as the generation of electricity and heat. The methods used in the LCA are discussed, including the Swiss method of ecological scarcity (Environmental Impact Points, UBP 06), and the European Eco-indicator 99 method. The results of the study are discussed, including the finding that not all biofuels can reduce environmental impacts as compared to fossil fuels. The role to be played by biofuels produced in an environmentally-friendly way together with other forms of renewable energy in our future energy supply is discussed.

Radiological assessments, environmental monitoring, and study design

International Nuclear Information System (INIS)

Hansen, W.R.; Elle, D.R.

1980-01-01

Studies of the behavior of transuranic elements in the environment form the basic data for applied programs in radiological assessment, environmental monitoring, derivation of radiation-protection standards, and environmental impact statements. This chapter introduces some of the major information requirements of these applications of transuranic research data. Characteristics of the source terms from nuclear activities usually are needed for an analysis of environmental pathways or deployment of monitoring systems. Major inhalation and ingestion pathways are considered in assessments of hazards from transuranics and are discussed from the viewpoint of research needed

Hybrid LCA model for assessing the embodied environmental impacts of buildings in South Korea

International Nuclear Information System (INIS)

Jang, Minho; Hong, Taehoon; Ji, Changyoon

2015-01-01

The assessment of the embodied environmental impacts of buildings can help decision-makers plan environment-friendly buildings and reduce environmental impacts. For a more comprehensive assessment of the embodied environmental impacts of buildings, a hybrid life cycle assessment model was developed in this study. The developed model can assess the embodied environmental impacts (global warming, ozone layer depletion, acidification, eutrophication, photochemical ozone creation, abiotic depletion, and human toxicity) generated directly and indirectly in the material manufacturing, transportation, and construction phases. To demonstrate the application and validity of the developed model, the environmental impacts of an elementary school building were assessed using the developed model and compared with the results of a previous model used in a case study. The embodied environmental impacts from the previous model were lower than those from the developed model by 4.6–25.2%. Particularly, human toxicity potential (13 kg C 6 H 6 eq.) calculated by the previous model was much lower (1965 kg C 6 H 6 eq.) than what was calculated by the developed model. The results indicated that the developed model can quantify the embodied environmental impacts of buildings more comprehensively, and can be used by decision-makers as a tool for selecting environment-friendly buildings. - Highlights: • The model was developed to assess the embodied environmental impacts of buildings. • The model evaluates GWP, ODP, AP, EP, POCP, ADP, and HTP as environmental impacts. • The model presents more comprehensive results than the previous model by 4.6–100%. • The model can present the HTP of buildings, which the previous models cannot do. • Decision-makers can use the model for selecting environment-friendly buildings

Environmental Management Assessment of the Stanford Linear Accelerator Center

International Nuclear Information System (INIS)

1994-01-01

This report documents the results of the Environmental Management Assessment of the Stanford Linear Accelerator Center (SLAC), Menlo Park, California. During this assessment, the activities conducted by the assessment team included reviews of internal documents and reports from previous assessments; interviews with the US Department of Energy (DOE), US Environmental Protection Agency, State Water Resources Board, California Regional Water Quality Control Board, and SLAC contractor personnel; and inspections and observations of selected facilities and operations. Onsite portion of the assessment was conducted from January 18 through January 31, 1994, by the DOE Office of Environmental Audit (EH-24), located within the Office of Environment, Safety and Health (EH), and the Environment and Safety Support Division (ESS), located within the Oakland Operations Office (OAK). The EH-24 environmental management assessment and the OAK functional appraisal were combined to minimize disruptions to the site. The management disciplines and three technical areas (air quality, groundwater, and inactive waste sites) were evaluated by EH-24, and four other technical areas (surface water, waste management, toxic and chemical materials, and environmental radiation) were assessed by ESS

Federal environmental assessment panel process

International Nuclear Information System (INIS)

Edwards, R.A.; King, J.M.

1996-01-01

The Government of Canada inaugurated an environmental assessment process in 1973. Since that time, the Department of Natural Resources, or its predecessor, the Department of Energy Mines and Resources, and industrial clients of the Department, have been major participants in the process. In 1995, the authors interviewed representatives of a number of client industries and selected individuals, to ask their opinion of the public hearing part of the environmental assessment process, with the objective of identifying shortcomings and proposing improvements. Respondents criticized the hearings as costly, time-wasting, bureaucratic, and uncertain in cost, time, and outcome. A number of observations on noted areas of shortcoming are presented in this paper, with suggestions for improvement

Federal environmental assessment panel process

Energy Technology Data Exchange (ETDEWEB)

Edwards, R A; King, J M [Natural Resources Canada, Ottawa, ON (Canada)

1997-12-31

The Government of Canada inaugurated an environmental assessment process in 1973. Since that time, the Department of Natural Resources, or its predecessor, the Department of Energy Mines and Resources, and industrial clients of the Department, have been major participants in the process. In 1995, the authors interviewed representatives of a number of client industries and selected individuals, to ask their opinion of the public hearing part of the environmental assessment process, with the objective of identifying shortcomings and proposing improvements. Respondents criticized the hearings as costly, time-wasting, bureaucratic, and uncertain in cost, time, and outcome. A number of observations on noted areas of shortcoming are presented in this paper, with suggestions for improvement.

Comparative life cycle assessment of real pilot reactors for microalgae cultivation in different seasons

International Nuclear Information System (INIS)

Pérez-López, Paula; De Vree, Jeroen H.; Feijoo, Gumersindo; Bosma, Rouke; Barbosa, Maria J.; Moreira, María Teresa; Wijffels, René H.; Van Boxtel, Anton J.B.; Kleinegris, Dorinde M.M.

2017-01-01

Highlights: •Life cycle assessment was used to compare 3 real pilot systems for algae cultivation. •The temperature control system was the main contributor to environmental impacts. •Tubular reactors had lower impacts per unit of biomass produced than open pond. •Meteorological conditions on the reactors played a critical role in LCA results. •Environmental impact reductions of 17–90% were estimated for optimized full-scale reactors. -- Abstract: Microalgae are promising natural resources for biofuels, chemical, food and feed products. Besides their economic potential, the environmental sustainability must be examined. Cultivation has a significant environmental impact that depends on reactor selection and operating conditions. To identify the main environmental bottlenecks for scale-up to industrial facilities this study provides a comparative life cycle assessment (LCA) of open raceway ponds and tubular photobioreactors at pilot scale. The results are based on experimental data from real pilot plants operated in summer, fall and winter at AlgaePARC (Wageningen, The Netherlands). The energy consumption for temperature regulation presented the highest environmental burden. The production of nutrients affected some categories. Despite limited differences compared to the vertical system, the horizontal PBR was found the most efficient in terms of productivity and environmental impact. The ORP was, given the Dutch climatic conditions, only feasible under summer operation. The results highlight the relevance of LCA as a tool for decision-making in process design. Weather conditions and availability of sources for temperature regulation were identified as essential factors for the selection of geographic locations and for microalgal cultivation systems based on environmental criteria. Simulation of large-scale reactors with optimized temperature regulation systems lead to environmental improvements and energy demand reductions ranging from 17% up to 90% for

Techno-economic viability assessments of greener propulsion technology under potential environmental regulatory policy scenarios

International Nuclear Information System (INIS)

Nalianda, D.K.; Kyprianidis, K.G.; Sethi, V.; Singh, R.

2015-01-01

Highlights: • An advanced method is presented for techno-economic assessment under potential environmental regulatory policy scenarios. • The viability of the contra-rotating open rotor concept is investigated under various environmental policies. • CO_2 taxation is needed to drive the aerospace industry towards greener solutions. - Abstract: Sustainability of the aviation industry, as any other industry, depends on the elasticity of demand for the product and profitability through minimising operating costs. Of paramount importance is assessing and understanding the interdependency and effects of environmentally optimised solutions and emission mitigation policies. This paper describes the development and application of assessment methodologies to better understand the effects of environmental taxation/energy policies aimed at environmental pollution reduction and the future potential economic impact they may have on the adaptation of “greener” novel technologies. These studies are undertaken using a Techno-economic Environmental Risk Assessment approach. The methodology demonstrated allows the assessment of the economic viability of new technologies compared to conventional technologies, for various CO_2 emission taxation and fuel price scenarios. It considers relative increases in acquisition price and maintenance costs. A study undertaken as a ‘proof of concept’ compares a Counter Rotating Open Rotor aircraft with a conventional aircraft for short range operations. It indicates that at current fuel price and with no carbon taxation, a highly fuel efficient technology, such as the one considered, could be rendered economically unviable. The work goes on to demonstrate that in comparison to the conventional aircraft, any economic benefits that may be accrued from improvement in fuel consumption through such a technology, may well be negated through increases in acquisition price and maintenance costs. The work further demonstrates that if policy

Impact Assessment and Environmental Evaluation of Various Ammonia Production Processes

Science.gov (United States)

Bicer, Yusuf; Dincer, Ibrahim; Vezina, Greg; Raso, Frank

2017-05-01

In the current study, conventional resources-based ammonia generation routes are comparatively studied through a comprehensive life cycle assessment. The selected ammonia generation options range from mostly used steam methane reforming to partial oxidation of heavy oil. The chosen ammonia synthesis process is the most common commercially available Haber-Bosch process. The essential energy input for the methods are used from various conventional resources such as coal, nuclear, natural gas and heavy oil. Using the life cycle assessment methodology, the environmental impacts of selected methods are identified and quantified from cradle to gate. The life cycle assessment outcomes of the conventional resources based ammonia production routes show that nuclear electrolysis-based ammonia generation method yields the lowest global warming and climate change impacts while the coal-based electrolysis options bring higher environmental problems. The calculated greenhouse gas emission from nuclear-based electrolysis is 0.48 kg CO2 equivalent while it is 13.6 kg CO2 per kg of ammonia for coal-based electrolysis method.

Power and environmental assessment

DEFF Research Database (Denmark)

Cashmore, Matthew Asa; Richardson, Tim

2013-01-01

The significance of politics and power dynamics has long been recognised in environmental assessment (EA) research, but there has not been sustained attention to power, either theoretically or empirically. The aim of this special issue is to encourage the EA community to engage more consistently...

Environmental assessment of incinerator residue utilisation

OpenAIRE

Toller, Susanna

2008-01-01

 In Sweden, utilisation of incinerator residues outside disposal areas is restricted by environmental concerns, as such residues commonly contain greater amounts of potentially toxic trace elements than the natural materials they replace. On the other hand, utilisation can also provide environmental benefits by decreasing the need for landfill and reducing raw material extraction. This thesis provides increased knowledge and proposes better approaches for environmental assessment of incinerat...

Route assessment using comparative risk factors integrated through a GIS

International Nuclear Information System (INIS)

Toth, D.M.; O'Connell, W.J.

1996-01-01

The assessment of potential alternative routes for the shipment of spent nuclear fuel was simplified through the use of comparative risk factors evaluated using detailed route and environmental attributes. The route characteristics, integrated into risk measures, vary strongly with location and were developed from national, state, and local sources. The route data and evaluation were managed using a geographic information system (GIS). An assessment of four real North Florida routes was performed and an interstate highway route exhibited the lowest risk based on the application of the risk factors

Modeling Of Construction Noise For Environmental Impact Assessment

Directory of Open Access Journals (Sweden)

Mohamed F. Hamoda

2008-06-01

Full Text Available This study measured the noise levels generated at different construction sites in reference to the stage of construction and the equipment used, and examined the methods to predict such noise in order to assess the environmental impact of noise. It included 33 construction sites in Kuwait and used artificial neural networks (ANNs for the prediction of noise. A back-propagation neural network (BPNN model was compared with a general regression neural network (GRNN model. The results obtained indicated that the mean equivalent noise level was 78.7 dBA which exceeds the threshold limit. The GRNN model was superior to the BPNN model in its accuracy of predicting construction noise due to its ability to train quickly on sparse data sets. Over 93% of the predictions were within 5% of the observed values. The mean absolute error between the predicted and observed data was only 2 dBA. The ANN modeling proved to be a useful technique for noise predictions required in the assessment of environmental impact of construction activities.

Environmental assessment of low-organic waste landfill scenarios by means of life-cycle assessment modelling (EASEWASTE)

DEFF Research Database (Denmark)

Manfredi, Simone; Christensen, Thomas Højlund; Scharff, H.

2010-01-01

for in the life-cycle impact assessment calculation, the small gas generation in low-organic waste landfills reduced the actual potential for energy generation and therefore the environmental savings obtained were reduced proportionally. Groundwater pollution from input of leachate was also evaluated and the WHO......The environmental performance of two low-organic waste landfill scenarios ('low-organic-energy' and 'low-organic-flare') was developed and compared with two household waste landfill scenarios ('household-energy' and 'household-flare') by means of LCA-modelling. The LCA-modelling was made for 1...

Comparative analysis of energy impacts of traditional and partly electronic environmental auditing: Learning from the Japanese automotive industry case

OpenAIRE

Mbohwa, C

2008-01-01

This paper does a comparative analysis and assessment of energy impacts of traditional and partly electronic ISO 14001 environmental management system auditing that using videoconferencing systems. The focus is on the Japanese automotive industry. The idea is to quantify the environmental impacts of auditing and resolve the important question on whether or not the use of information and communication technology (ICT) in environmental auditing reduces environmental impacts in IS...

Applicable international environmental impact assessment laws for ...

African Journals Online (AJOL)

Lawrence Hart

1971-05-28

May 28, 1971 ... appraise selected International Environmental laws and the Nigerian Environmental Impact Assessment methodology ... maze of pipelines, delivery lines, flow lines, canals and .... Toxic Materials and international waterways.

Environmental risk assessment for plant pests: a procedure to evaluate their impacts on ecosystem services

DEFF Research Database (Denmark)

Gilioli, G.; Schrader, G.; Baker, R.H.A.

2014-01-01

and temporal resolution is then used to explore how an IAS, as an exogenous driving force, may trigger modifications in the target environment. The method presented here provides a standardized approach to generate comparable and reproducible results for environmental risk assessment as a component of Pest...... Risk Analysis. The method enables the assessment of overall environmental risk which integrates the impacts on different components of the environment and their probabilities of occurrence. The application of the proposed scheme is illustrated by evaluating the environmental impacts of the invasive......The current methods to assess the environmental impacts of plant pests differ in their approaches and there is a lack of the standardized procedures necessary to provide accurate and consistent results, demonstrating the complexity of developing a commonly accepted scheme for this purpose...

Environmental valuation - to use or not to use? A comparative study of the United States and Europe

International Nuclear Information System (INIS)

Navrud, S.; Pruckner, G.J.

1997-01-01

Valuation methods have been used for five main purposes in environmental decision- making. Cost-benefit analysis (CBA) of projects, CBA of new regulations, natural resource damage assessment, environmental costing, and environmental accounting. The relatively lower importance attached to economic efficiency in environmental decision-making in most European countries compared to the U.S.A., both legally and in practice, might account for our general finding that there are very few valuation studies in Europe which have served as a decisive basis for environmental policy and regulations. However, with EU's goal to establish environmentally adjusted national accounts and to apply CBA to environmental policy and regulations, time seems ripe for an increased use of valuation techniques in Europe. 66 refs

Environmental Risk Assessment System for Phosphogypsum Tailing Dams

OpenAIRE

Xin Sun; Ping Ning; Xiaolong Tang; Honghong Yi; Kai Li; Lianbi Zhou; Xianmang Xu

2013-01-01

This paper may be of particular interest to the readers as it provides a new environmental risk assessment system for phosphogypsum tailing dams. In this paper, we studied the phosphogypsum tailing dams which include characteristics of the pollution source, environmental risk characteristics and evaluation requirements to identify the applicable environmental risk assessment methods. Two analytical methods, that is, the analytic hierarchy process (AHP) and fuzzy logic, were used to handle the...

Compared assessment of chemical risk and radiological risk for the environment

International Nuclear Information System (INIS)

Beaugelin-Seiller, K.; Garnier-Laplace, J.

2007-01-01

The environmental protection is today a global issue that concerns all the human activities. The challenge is to be able to prove their compatibility with the protection of the natural environment, but also if required to manage adequately a potential or established risk, generally in the context of ever strict regulations. Regarding the chemical aspects, known methods are available for the assessment of the associated risk for the environment. From the radiological point of view, the necessity to have such tools recently became more apparent, in order to justify for the public and with a full transparency the release of radioactive substances into the environment, to meet the requirements of the new regulations in terms of environmental protection and finally to harmonize the approaches between human and environmental radioprotection as well as between chemical and radioactive pollutants, simultaneously present for example in routine releases from nuclear power plants. At this end of harmonization, the assessment methodologies of the environmental risk linked to radionuclides or chemical substances are exposed from the theory to their comparative application, a new approach under development from which the first results are summarised. (authors)

Assessment of the implementation of environmental management ...

African Journals Online (AJOL)

Assessment of the implementation of environmental management system in the construction ... Journal of Fundamental and Applied Sciences ... The Environmental Management System (EMS) illustrates a possible solution to reduce the ...

43 CFR 46.310 - Contents of an environmental assessment.

Science.gov (United States)

2010-10-01

... implementation without the need for further analysis. Adaptive management includes a monitoring component... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Contents of an environmental assessment... OF THE NATIONAL ENVIRONMENTAL POLICY ACT OF 1969 Environmental Assessments § 46.310 Contents of an...

ABOUT FORMS, EFFICIENCY AND ASSESSMENT OF ENVIRONMENTAL MANAGEMENT

Directory of Open Access Journals (Sweden)

H. Bachev

2015-03-01

Full Text Available We suggest a holistic framework for analyzing, assessment and improvement of environmental management using “agrariansector” as an example. It incorporates an interdisciplinary approach (Economics, Organization, Law, Sociology, Ecology, Technology, Behavioral and Political Sciences and includes: specification of managerial actors, needs and spectrum of governing modes (institutional environment; private, collective, market, public modes at different level of decision-making (individual, farm, eco-system, local, regional, national, transnational, global; specification of critical socio-economic, natural, technological, behavioral etc. factors of managerial choice, and feasible spectrum of managerial forms; defining and assessing comparative and absolute efficiency of eco-management forms and system; improvement of forms of public intervention in eco-management.

Environmental assessment, proposed generating station for Darlington

International Nuclear Information System (INIS)

1975-04-01

This document indicates the intention of Ontario Hydro to seek approval from the Provincial Government for its plan to construct and operate a 3400 MWe nuclear generating station at the Darlington site, west of Bowmanville. This preliminary proposal also contains the environmental assessment. The environmental section of this proposal describes and assesses the existing environment and the environmental influences which would occur due to the construction and operation of a nuclear generating station, consisting of four 850 MW units, at the Darlington site. This proposed station is similar to the Bruce GS A station presently under construction. (author)

The mediation of environmental assessment's influence: What role for power?

International Nuclear Information System (INIS)

Cashmore, Matthew; Axelsson, Anna

2013-01-01

Considerable empirical research has been conducted on why policy tools such as environmental assessment (EA) often appear to have ‘little effect’ (after Weiss) on policy decisions. This article revisits this debate but looks at a mediating factor that has received limited attention to-date in the context of EA — political power. Using a tripartite analytical framework, a comparative analysis of the influence and significance of power in mediating environmental policy integration is undertaken. Power is analysed, albeit partially, through an exploration of institutions that underpin social order. Empirically, the research examines the case of a new approach to policy-level EA (essentially a form of Strategic Environmental Assessment) developed by the World Bank and its trial application to urban environmental governance and planning in Dhaka mega-city, Bangladesh. The research results demonstrate that power was intimately involved in mediating the influence of the policy EA approach, in both positive (enabling) and negative (constraining) ways. It is suggested that the policy EA approach was ultimately a manifestation of a corporate strategy to maintain the powerful position of the World Bank as a leading authority on international development which focuses on knowledge generation. Furthermore, as constitutive of an institution and reflecting the worldviews of its proponents, the development of a new approach to EA also represents a significant power play. This leads us to, firstly, emphasise the concepts of strategy and intentionality in theorising how and why EA tools are employed, succeed and fail; and secondly, reflect on the reasons why power has received such limited attention to-date in EA scholarship. - Highlights: ► Conducts empirical research on the neglected issue of power. ► Employs an interpretation of power in which it is viewed as a productive phenomenon. ► Analyses the influence of power in the trial application of a new approach to

Comparative life cycle assessment of ghana-made bamboo-frame bicycle and conventional bicycles assembled and used in the Netherlands

NARCIS (Netherlands)

Agyekum, E.O.; Fortuin, K.P.J.; Harst, van der E.J.M.

2014-01-01

In order to assess the sustainability of bamboo-framed bicycles produced in Ghana, an environmental and social life cycle assessments (LCA) were performed. For the environmental LCA, a bamboo-frame bicycle was compared with aluminium- and steel-frame bicycles, focussing on processes related to the

Selecting environmental indicator for use in strategic environmental assessment

International Nuclear Information System (INIS)

Donnelly, Alison; Jones, Mike; O'Mahony, Tadhg; Byrne, Gerry

2007-01-01

The primary aim of carrying out Strategic Environmental Assessment (SEA) is to provide for a high level of environmental protection and to integrate environmental considerations into the planning process. The SEA Directive (2001/42/EC) recommends monitoring to determine the environmental impact of the implementation of plans and programmes. Environmental indicators are a useful tool by which this impact may be measured. However, careful consideration must be given to developing a set of indicators in order to isolate, plan or programme specific impacts. Here, we demonstrate the effectiveness of a workshop-based approach to develop appropriate criteria for selecting environmental indicator for use in SEA. A multi-disciplinary team was used in the approach which consisted of representatives from each of four environmental fields i.e. biodiversity, water, air and climatic factors, together with SEA experts, planning experts, academics and consultants. The team reviewed various sets of criteria, already in existence, for environmental indicator development but not specifically for SEA indicators. The results of this review together with original criteria were applied to the final list agreed upon. Some of the criteria recommended includes, relevance to plan, ability to prioritise, and ability to identify conflict with other plan or SEA objectives

Environmental Engineering Curricula assessment in the global world

Science.gov (United States)

Caporali, Enrica; Catelani, Marcantonio; Manfrida, Giampaolo; Valdiserri, Juna

2014-05-01

accordance with the Bologna Process, offered at School of Engineering, University of Firenze. The application of the accreditation model EUR-ACE to the multidisciplinary first cycle degree in Civil, Building and Environmental Engineering and the more specific second cycle degree in Environmental Engineering is discussed. Particularly, the critical issues to guarantee the quality and the status of environmental engineering graduates, in terms of applying knowledge capacities and technical innovative competences are examined. The expected learning outcomes of the quality assessment according the Dublin descriptors or the more engineering focused EUR-ACE skill descriptors, and at local and global scale are analysed. The system for educating engineers in communicating knowledge and understanding, making informed judgments and choices, capacities to lifelong learning is also assessed. The involvement of the professional working world in the definition of goals in skills, of typical expectations of achievements and abilities, and in general in comparing the teaching profile with the actual needs of the technical workforce, is described. With the aim to promote the innovative aspects related with the environmental engineering education, the important role that science and technology could play is also taken into consideration.

The value of environmental impact assessments

International Nuclear Information System (INIS)

Sohocki, D.D.

1996-01-01

The environment and the economy are inextricably linked. Today the environmental, economic, and social associated with project and program decisions are at times of such a magnitude and duration that they exceed our ability to understand, let alone mitigate them. Energy production, distribution, pricing, policies, end uses, and externalities demonstrate the need for wise planning and informed decision making. International cooperation, based upon mutually shared respect, responsibility, and innovative solutions is an essential component of addressing contemporary issues, impacts, and opportunities. Both egypt and the united states have laws requiring environmental impact assessments. Just as egypt can learn from our successes and failures in the environmental impact assessment field over the past 36 years, the united states and other nations can learn as egypt develops and innovates its own approaches and solutions

Comparative Probabilistic Assessment of Occupational Pesticide Exposures Based on Regulatory Assessments

Science.gov (United States)

Pouzou, Jane G.; Cullen, Alison C.; Yost, Michael G.; Kissel, John C.; Fenske, Richard A.

2018-01-01

Implementation of probabilistic analyses in exposure assessment can provide valuable insight into the risks of those at the extremes of population distributions, including more vulnerable or sensitive subgroups. Incorporation of these analyses into current regulatory methods for occupational pesticide exposure is enabled by the exposure data sets and associated data currently used in the risk assessment approach of the Environmental Protection Agency (EPA). Monte Carlo simulations were performed on exposure measurements from the Agricultural Handler Exposure Database and the Pesticide Handler Exposure Database along with data from the Exposure Factors Handbook and other sources to calculate exposure rates for three different neurotoxic compounds (azinphos methyl, acetamiprid, emamectin benzoate) across four pesticide-handling scenarios. Probabilistic estimates of doses were compared with the no observable effect levels used in the EPA occupational risk assessments. Some percentage of workers were predicted to exceed the level of concern for all three compounds: 54% for azinphos methyl, 5% for acetamiprid, and 20% for emamectin benzoate. This finding has implications for pesticide risk assessment and offers an alternative procedure that may be more protective of those at the extremes of exposure than the current approach. PMID:29105804

Comparative Probabilistic Assessment of Occupational Pesticide Exposures Based on Regulatory Assessments.

Science.gov (United States)

Pouzou, Jane G; Cullen, Alison C; Yost, Michael G; Kissel, John C; Fenske, Richard A

2017-11-06

Implementation of probabilistic analyses in exposure assessment can provide valuable insight into the risks of those at the extremes of population distributions, including more vulnerable or sensitive subgroups. Incorporation of these analyses into current regulatory methods for occupational pesticide exposure is enabled by the exposure data sets and associated data currently used in the risk assessment approach of the Environmental Protection Agency (EPA). Monte Carlo simulations were performed on exposure measurements from the Agricultural Handler Exposure Database and the Pesticide Handler Exposure Database along with data from the Exposure Factors Handbook and other sources to calculate exposure rates for three different neurotoxic compounds (azinphos methyl, acetamiprid, emamectin benzoate) across four pesticide-handling scenarios. Probabilistic estimates of doses were compared with the no observable effect levels used in the EPA occupational risk assessments. Some percentage of workers were predicted to exceed the level of concern for all three compounds: 54% for azinphos methyl, 5% for acetamiprid, and 20% for emamectin benzoate. This finding has implications for pesticide risk assessment and offers an alternative procedure that may be more protective of those at the extremes of exposure than the current approach. © 2017 Society for Risk Analysis.

Fuzzy comprehensive evaluation of multiple environmental factors for swine building assessment and control.

Science.gov (United States)

Xie, Qiuju; Ni, Ji-Qin; Su, Zhongbin

2017-10-15

In confined swine buildings, temperature, humidity, and air quality are all important for animal health and productivity. However, the current swine building environmental control is only based on temperature; and evaluation and control methods based on multiple environmental factors are needed. In this paper, fuzzy comprehensive evaluation (FCE) theory was adopted for multi-factor assessment of environmental quality in two commercial swine buildings using real measurement data. An assessment index system and membership functions were established; and predetermined weights were given using analytic hierarchy process (AHP) combined with knowledge of experts. The results show that multi-factors such as temperature, humidity, and concentrations of ammonia (NH 3 ), carbon dioxide (CO 2 ), and hydrogen sulfide (H 2 S) can be successfully integrated in FCE for swine building environment assessment. The FCE method has a high correlation coefficient of 0.737 compared with the method of single-factor evaluation (SFE). The FCE method can significantly increase the sensitivity and perform an effective and integrative assessment. It can be used as part of environmental controlling and warning systems for swine building environment management to improve swine production and welfare. Copyright © 2017 Elsevier B.V. All rights reserved.

GIS based procedure of cumulative environmental impact assessment.

Science.gov (United States)

Balakrishna Reddy, M; Blah, Baiantimon

2009-07-01

Scale and spatial limits of impact assessment study in a GIS platform are two very important factors that could have a bearing on the genuineness and quality of impact assessment. While effect of scale has been documented and well understood, no significant study has been carried out on spatial considerations in an impact assessment study employing GIS technique. A novel technique of impact assessment demonstrable through GIS approach termed hereby as 'spatial data integrated GIS impact assessment method (SGIAM)' is narrated in this paper. The technique makes a fundamental presumption that the importance of environmental impacts is dependent, among other things, on spatial distribution of the effects of the proposed action and of the affected receptors in a study area. For each environmental component considered (e.g., air quality), impact indices are calculated through aggregation of impact indicators which are measures of the severity of the impact. The presence and spread of environmental descriptors are suitably quantified through modeling techniques and depicted. The environmental impact index is calculated from data exported from ArcINFO, thus giving significant importance to spatial data in the impact assessment exercise.

PRINCIPLES OF ENVIRONMENTAL ASSESSMENT IN THE LIFECYCLE OF PRODUCTS

Directory of Open Access Journals (Sweden)

Joanna Kulczycka

2017-02-01

Full Text Available One of the aims of the European Commission (EC activities is to introduce uniform rules for the environmental performance assessment based on the life cycle assessment method (LCA, which can be widely used e.g. in eco-labeling, assessment of goods, services, technology, etc. Therefore, from 1 November 2013 the European Commission implemented a pilot phase of the project on developing common methods for measuring the environmental performance of the product and organisation, aims to develop guidance documents in this field. The pilot phase includes development of the Category Rules relating to the calculation, verification and communication for environmental footprint of the 25 categories of products and two organizations. Therefore, the article presents the principle of environmental performance based on life cycle assessment in relation to the objectives of the proposed methodology of environmental footprint.

Hybrid LCA model for assessing the embodied environmental impacts of buildings in South Korea

Energy Technology Data Exchange (ETDEWEB)

Jang, Minho, E-mail: minmin40@hanmail.net [Asset Management Division, Mate Plus Co., Ltd., 9th Fl., Financial News Bldg. 24-5 Yeouido-dong, Yeongdeungpo-gu, Seoul, 150-877 (Korea, Republic of); Hong, Taehoon, E-mail: hong7@yonsei.ac.kr [Department of Architectural Engineering, Yonsei University, Seoul, 120-749 (Korea, Republic of); Ji, Changyoon, E-mail: chnagyoon@yonsei.ac.kr [Department of Architectural Engineering, Yonsei University, Seoul, 120-749 (Korea, Republic of)

2015-01-15

The assessment of the embodied environmental impacts of buildings can help decision-makers plan environment-friendly buildings and reduce environmental impacts. For a more comprehensive assessment of the embodied environmental impacts of buildings, a hybrid life cycle assessment model was developed in this study. The developed model can assess the embodied environmental impacts (global warming, ozone layer depletion, acidification, eutrophication, photochemical ozone creation, abiotic depletion, and human toxicity) generated directly and indirectly in the material manufacturing, transportation, and construction phases. To demonstrate the application and validity of the developed model, the environmental impacts of an elementary school building were assessed using the developed model and compared with the results of a previous model used in a case study. The embodied environmental impacts from the previous model were lower than those from the developed model by 4.6–25.2%. Particularly, human toxicity potential (13 kg C{sub 6}H{sub 6} eq.) calculated by the previous model was much lower (1965 kg C{sub 6}H{sub 6} eq.) than what was calculated by the developed model. The results indicated that the developed model can quantify the embodied environmental impacts of buildings more comprehensively, and can be used by decision-makers as a tool for selecting environment-friendly buildings. - Highlights: • The model was developed to assess the embodied environmental impacts of buildings. • The model evaluates GWP, ODP, AP, EP, POCP, ADP, and HTP as environmental impacts. • The model presents more comprehensive results than the previous model by 4.6–100%. • The model can present the HTP of buildings, which the previous models cannot do. • Decision-makers can use the model for selecting environment-friendly buildings.

Sustainable energy provision: a comparative assessment of the various electricity supply options

International Nuclear Information System (INIS)

Voss, A.

2000-01-01

The provision of electricity is of central importance for economic growth and societal development. While numerous societal and economic benefits arise from the use of electricity, the production of electricity can also have negative impacts on the environment and the climate system. The commitment to sustainable development calls for the evaluation of the extent to which the different electricity supply options fulfill the sustainability criteria. The conceptual framework of Life Cycle Assessment (LCA) can provide a solid basis for a comparative assessment of different electricity supply options with regard to their environmental impacts, raw material requirements as well as their resulting external costs. Results of a comprehensive comparative assessment of nuclear energy and other electricity options are presented. (author)

A life cycle assessment framework combining nutritional and environmental health impacts of diet: a case study on milk

DEFF Research Database (Denmark)

Stylianou, Katerina S.; Heller, Martin C.; Fulgoni III, Victor L.

2016-01-01

of less healthy foods (sugar-sweetened beverages). Further studies are needed to test whether this conclusion holds within a more comprehensive assessment of environmental and nutritional health impacts. Conclusions This case study provides the first quantitative epidemiology-based estimate......Purpose While there has been considerable effort to understand the environmental impact of a food or diet, nutritional effects are not usually included in food-related life cycle assessment (LCA). Methods We developed a novel Combined Nutritional and Environmental Life Cycle Assessment (CONE......-LCA) framework that evaluates and compares in parallel the environmental and nutritional effects of foods or diets. We applied this framework to assess human health impacts, expressed in Disability Adjusted Life Years (DALYs), in a proof-of conceptcase study that investigated the environmental and nutritional...

Environmental assessment for the Processing and Environmental Technology Laboratory (PETL)

International Nuclear Information System (INIS)

1995-09-01

The U.S. Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Processing and Environmental Technology Laboratory (PETC) at Sandia National Laboratories/New Mexico (SNL/NM). This facility is needed to integrate, consolidate, and enhance the materials science and materials process research and development (R ampersand D) currently in progress at SNL/NM. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an environmental impact statement is not required, and DOE is issuing this Finding of No Significant Impact (FONSI)

Environmental assessment for the Processing and Environmental Technology Laboratory (PETL)

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

The U.S. Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Processing and Environmental Technology Laboratory (PETC) at Sandia National Laboratories/New Mexico (SNL/NM). This facility is needed to integrate, consolidate, and enhance the materials science and materials process research and development (R&D) currently in progress at SNL/NM. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an environmental impact statement is not required, and DOE is issuing this Finding of No Significant Impact (FONSI).

Graphical Methodology of Global Pollution Index for the Environmental Impact Assessment Using Two Environmental Components

OpenAIRE

Corneliu Cojocaru; Diana Mariana Cocârţă; Irina Aura Istrate; Igor Creţescu

2017-01-01

One of the applied methods for environmental impact assessment is the index of global pollution (IGP) proposed by Rojanschi in 1991. This methodology enables the global estimation for the ecosystem state affected more or less by human activities. Unfortunately, Rojanschi’s method has a limitation; it can be applied only if at least three environmental components are considered. Frequently, many environmental impact assessment applications rely on analysis of only two environmental components....

Environmental Assessments and Stakeholder Involvement

International Nuclear Information System (INIS)

Wesolowski, Cassandra

2006-01-01

Directives and legislation on EIA and SEA need to provide more guidance on how and when public participation should be used. There are now several examples of how well public participation can be performed and the methods are becoming more proactive and innovative. By increasing the role of public participation within the Environmental Assessment process, plans, programmes and projects will become more publicly acceptable. There does need to be a balance as to where public participation is performed in the system, as too much can be a stress on resources and time, as well as producing ineffective results. Key stages such as scoping, preparing the environmental statement or report and decision-making need to be highlighted for the benefits public participation can have. The Aarhus Convention is certainly making a difference in the UK; however it is difficult to judge exactly how much difference yet. It was only fully implemented in the UK in 2005 although some Authorities were applying the three pillars prior to implementation. It is not clear how aware the general public are of the Convention and their rights. Empowering communities in the UK. will communities for decision-making in Environmental Assessments? Providing the public with resources to enable them to fully engage in the process will improve the participation and increase their confidence, but how will this increase their influence within the decision-making process? Ultimately, should the stakeholders and public just influence the incremental decisions made in Environmental Assessments or have more responsibility within the major decisions taken? It will be interesting to see how these issues are addressed over the coming years

Environmental Assessments and Stakeholder Involvement

Energy Technology Data Exchange (ETDEWEB)

Wesolowski, Cassandra [Univ. of Manchester, School of Environment and Development (United Kingdom). Planning and Landscape

2006-09-15

Directives and legislation on EIA and SEA need to provide more guidance on how and when public participation should be used. There are now several examples of how well public participation can be performed and the methods are becoming more proactive and innovative. By increasing the role of public participation within the Environmental Assessment process, plans, programmes and projects will become more publicly acceptable. There does need to be a balance as to where public participation is performed in the system, as too much can be a stress on resources and time, as well as producing ineffective results. Key stages such as scoping, preparing the environmental statement or report and decision-making need to be highlighted for the benefits public participation can have. The Aarhus Convention is certainly making a difference in the UK; however it is difficult to judge exactly how much difference yet. It was only fully implemented in the UK in 2005 although some Authorities were applying the three pillars prior to implementation. It is not clear how aware the general public are of the Convention and their rights. Empowering communities in the UK. will communities for decision-making in Environmental Assessments? Providing the public with resources to enable them to fully engage in the process will improve the participation and increase their confidence, but how will this increase their influence within the decision-making process? Ultimately, should the stakeholders and public just influence the incremental decisions made in Environmental Assessments or have more responsibility within the major decisions taken? It will be interesting to see how these issues are addressed over the coming years.

Environmental risk assessment: an Australian perspective. Supervising Scientist Report 102

International Nuclear Information System (INIS)

Beer, T.; Ziolkowski, F.

1995-01-01

Environmental risk assessment can be used as a strategic tool to set environmental priorities and as a tactical tool to set environmental standards. This report is designed to inform Australian environmental managers about the techniques and applications of environmental risk assessment and to familiarize risk analysts with some of the issues that are of concern to environmental managers. The use of risk assessment is illustrated by applying its techniques to five case studies which include: risk from chemicals and from contaminated sites; risk to people and to the natural environment from development, such as uranium mining; climate change; and risk associated with political decision-making. Then, by considering Australian and overseas practice, a generic framework is presented within which environmental risk assessment in Australia can be undertaken, and possible methods of implementation are discussed. refs., 38 figs

Environmental assessment of incinerator residue utilisation

Energy Technology Data Exchange (ETDEWEB)

Toller, Susanna

2008-10-15

In Sweden, utilisation of incinerator residues outside disposal areas is restricted by environmental concerns, as such residues commonly contain greater amounts of potentially toxic trace elements than the natural materials they replace. On the other hand, utilisation can also provide environmental benefits by decreasing the need for landfill and reducing raw material extraction. This thesis provides increased knowledge and proposes better approaches for environmental assessment of incinerator residue utilisation, particularly bottom ash from municipal solid waste incineration (MSWI). A life cycle assessment (LCA) based approach was outlined for environmental assessment of incinerator residue utilisation, in which leaching of trace elements as well as other emissions to air and water and the use of resources were regarded as constituting the potential environmental impact from the system studied. Case studies were performed for i) road construction with or without MSWI bottom ash, ii) three management scenarios for MSWI bottom ash and iii) three management scenarios for wood ash. Different types of potential environmental impact predominated in the activities of the system and the scenarios differed in use of resources and energy. Utilising MSWI bottom ash in road construction and recycling of wood ash on forest land saved more natural resources and energy than when these materials were managed according to the other scenarios investigated, including dumping in landfill. There is a potential for trace element leaching regardless of how the ash is managed. Trace element leaching, particularly of copper (Cu), was identified as being relatively important for environmental assessment of MSWI bottom ash utilisation. CuO is suggested as the most important type of Cu-containing mineral in weathered MSWI bottom ash, whereas in the leachate Cu is mainly present in complexes with dissolved organic matter (DOM). The hydrophilic components of the DOM were more important for Cu

Environmental impact assessment in the Fijian state sector

International Nuclear Information System (INIS)

Turnbull, Jane

2003-01-01

For over 20 years, the South Pacific state of Fiji has required developers to conduct more than 70 environmental impact assessments (EIA), without specifying the environmental quality or impacts it considers (in)appropriate. It has ignored aspects of EIA to which agencies funding development have paid little attention--assessing alternatives, monitoring outcomes and enforcing consent conditions. This infers the Fijian state is not serious about using EIA to control environmental quality. Factors other than technical shortcomings are shaping the way the state constrains EIA practice. Unless these factors change, the comprehensive EIA system proposed in Sustainable Development legislation will not prevent environmental degradation

Methods of Environmental Impact Assessment in Colombia

Directory of Open Access Journals (Sweden)

Javier Toro Calderón

2013-10-01

Full Text Available The Environmental Impact Assessment (EIA in Colombia constitutes the primary tool for making decisions with respect to projects, works and activities (PWA with potential for significant environmental impacts. In the case of the infrastructure of the PWA, the EIA is mandatory and determines the environmental license (EL for construction and operation. This paper analyzes the methods used to assess the environmental impact of the PWA that have applied for licenses with the Ministry of Environment and Sustainable Development. It was found that the method most frequently used is the qualitative proposal by Conesa, with modifications that reduce the effectiveness of the EIA and favor the subjectivity and bias of the evaluator. Finally a series of recom­mendations to improve the process in the country are proposed.

Consumer and producer environmental responsibility. Comparing two approaches

International Nuclear Information System (INIS)

Rodrigues, Joao; Domingos, Tiago

2008-01-01

Two different indicators of 'environmental responsibility' were independently proposed by Rodrigues et al. [Rodrigues, J., Domingos, T., Giljum, S., Schneider, F., 2006. Designing an indicator of environmental responsibility. Ecological Economics, 59 (3): 256-266.] and Lenzen et al. [Lenzen, M., Murray, J., Sack, F., Wiedmann, T., 2007. Shared producer and consumer responsibility - theory and practice. Ecological Economics, 61: 27-42.]. These indicators are both supposed to reflect the indirect effects of consumer and producer behavior in the generation of environmental pressure. In this paper we compare their mathematical properties and interpretation. We conclude that they have different implications for environmental policy. (author)

Comparative study on life cycle environmental impact assessment of copper and aluminium cables

Science.gov (United States)

Bao, Wei; Lin, Ling; Song, Dan; Guo, Huiting; Chen, Liang; Sun, Liang; Liu, Mei; Chen, Jianhua

2017-11-01

With the rapid development of industrialization and urbanization in China, domestic demands for copper and aluminium resources increase continuously and the output of copper and aluminium minerals rises steadily. The output of copper in China increased from 0.6 million tons (metal quantity) in 2003 to 1.74 million tons (metal quantity) in 2014, and the output of bauxite increased from 21 million tons in 2006 to 59.21 million tons in 2014. In the meantime, the import of copper and aluminium minerals of China is also on a rise. The import of copper concentrate and bauxite increased from 4.94 million tons and 9.68 million tons in 2006 to 10.08 million tons and 70.75 million tons in 2013 respectively. Copper and aluminium resources are widely applied in fields such as construction, electrical and electronics, machinery manufacturing, and transportation, and serve as important material basis for the national economic and social development of China. Cable industry is a typical industry where copper and aluminium resources are widely used. In this paper, a product assessment model is built from the perspective of product life cycle. Based on CNLCD database, differences in environmental impacts of copper and aluminium cables are analyzed from aspects such as resource acquisition, product production, transportation, utilization, and resource recycling. Furthermore, the advantages and disadvantages of products at different stages with different types of environmental impact are analyzed, so as to provide data support for cable industry in terms of product design and production, etc.

Environmental assessment of energy production from waste and biomass

Energy Technology Data Exchange (ETDEWEB)

Tonini, D.

2013-02-15

To evaluate the environmental and energy performance of bioenergy and waste-to-energy systems life cycle assessment was used in this thesis. This was supported by other tools such as material, substance, energy flow analysis and energy system analysis. The primary objective of this research was to provide a consistent framework for the environmental assessment of innovative bioenergy and waste-to-energy systems including the integration of LCA with other tools (mentioned earlier). The focus was on the following aspects: - Evaluation of potential future energy scenarios for Denmark. This was done by integrating the results of energy system analysis into life cycle assessment scenarios. - Identification of the criticalities of bioenergy systems, particularly in relation to land use changes. - Identification of potentials and criticalities associated with innovative waste refinery technologies. This was done by assessing a specific pilot-plant operated in Copenhagen, Denmark. The waste refining treatment was compared with a number of different state-of-the-art technologies such as incineration, mechanical-biological treatment and landfilling in bioreactor. The results highlighted that production of liquid and solid biofuels from energy crops should be limited when inducing indirect land use changes (iLUC). Solid biofuels for use in combined heat and power plants may perform better than liquid biofuels due to higher energy conversion efficiencies. The iLUC impacts stood out as the most important contributor to the induced GHG emissions within bioenergy systems. Although quantification of these impacts is associated with high uncertainty, an increasing number of studies are documenting the significance of the iLUC impacts in the bioenergy life cycle. With respect to municipal solid waste, state of the art incineration, MBT and waste refining (with associated energy and material recovery processes) may all provide important and comparable GHG emission savings. The waste

Environmental impact assessment of coal power plants in operation

Directory of Open Access Journals (Sweden)

Bartan Ayfer

2017-01-01

Full Text Available Coal power plants constitute an important component of the energy mix in many countries. However, coal power plants can cause several environmental risks such as: climate change and biodiversity loss. In this study, a tool has been proposed to calculate the environmental impact of a coal-fired thermal power plant in operation by using multi-criteria scoring and fuzzy logic method. We take into account the following environmental parameters in our tool: CO, SO2, NOx, particulate matter, fly ash, bottom ash, the cooling water intake impact on aquatic biota, and the thermal pollution. In the proposed tool, the boundaries of the fuzzy logic membership functions were established taking into account the threshold values of the environmental parameters which were defined in the environmental legislation. Scoring of these environmental parameters were done with the statistical analysis of the environmental monitoring data of the power plant and by using the documented evidences that were obtained during the site visits. The proposed method estimates each environmental impact factor level separately and then aggregates them by calculating the Environmental Impact Score (EIS. The proposed method uses environmental monitoring data and documented evidence instead of using simulation models. The proposed method has been applied to the 4 coal-fired power plants that have been operation in Turkey. The Environmental Impact Score was obtained for each power plant and their environmental performances were compared. It is expected that those environmental impact assessments will contribute to the decision-making process for environmental investments to those plants. The main advantage of the proposed method is its flexibility and ease of use.

Environmental impact assessment of coal power plants in operation

Science.gov (United States)

Bartan, Ayfer; Kucukali, Serhat; Ar, Irfan

2017-11-01

Coal power plants constitute an important component of the energy mix in many countries. However, coal power plants can cause several environmental risks such as: climate change and biodiversity loss. In this study, a tool has been proposed to calculate the environmental impact of a coal-fired thermal power plant in operation by using multi-criteria scoring and fuzzy logic method. We take into account the following environmental parameters in our tool: CO, SO2, NOx, particulate matter, fly ash, bottom ash, the cooling water intake impact on aquatic biota, and the thermal pollution. In the proposed tool, the boundaries of the fuzzy logic membership functions were established taking into account the threshold values of the environmental parameters which were defined in the environmental legislation. Scoring of these environmental parameters were done with the statistical analysis of the environmental monitoring data of the power plant and by using the documented evidences that were obtained during the site visits. The proposed method estimates each environmental impact factor level separately and then aggregates them by calculating the Environmental Impact Score (EIS). The proposed method uses environmental monitoring data and documented evidence instead of using simulation models. The proposed method has been applied to the 4 coal-fired power plants that have been operation in Turkey. The Environmental Impact Score was obtained for each power plant and their environmental performances were compared. It is expected that those environmental impact assessments will contribute to the decision-making process for environmental investments to those plants. The main advantage of the proposed method is its flexibility and ease of use.

Guidelines for evaluating the environmental performance of Product/Service-Systems through life cycle assessment

DEFF Research Database (Denmark)

Kjær, Louise Laumann; Pigosso, Daniela C. A.; McAloone, Tim C.

2018-01-01

Product/Service-Systems (PSS) such as integrated solutions, performance-based contracts or sharing systems are often proposed as means to enable improved environmental sustainability. However, PSS are not necessarily environmentally benign compared to conventional systems. Quantitative environmen......Product/Service-Systems (PSS) such as integrated solutions, performance-based contracts or sharing systems are often proposed as means to enable improved environmental sustainability. However, PSS are not necessarily environmentally benign compared to conventional systems. Quantitative....... In this article, we propose a set of guidelines consisting of six steps, which elaborates the LCA process with respect to the specific consideration for PSS assessment. The guidelines were developed based on identified challenges for the application of LCA on PSS, a review of existing LCAs on PSS case studies...

Environmental assessment of nanomaterial use in Denmark

DEFF Research Database (Denmark)

Kjølholt, Jesper; Gottschalk, Fadri; Brinch, Anna

This is the concluding report of the project "Nanomaterials – occurrence and effects in the Danish environment" (abbreviated NanoDEN), which part the Danish Government's initiative "Better Control of Nanomaterials" (“Bedre styr på nanomaterialer”) which is administered by the Danish Environmental...... Protection Agency. The projects in NanoDEN have aimed to investigate and generate new environmentally relevant knowledge on of nanomaterials on the Danish market and to assess the possible associated risks to the environment. The results from the sub-projects are summarized in the current report...... and it is assessed whether and how nanomaterials may pose a risk for the environment in Denmark. The assessment is based on investigations of nine selected nanomaterials, which are expected to be environmentally relevant based on knowledge of consumption quantities or how they are used. These data contribute...

Environmental impact assessment of european non-ferro mining industries through life-cycle assessment

Science.gov (United States)

Hisan Farjana, Shahjadi; Huda, Nazmul; Parvez Mahmud, M. A.

2018-05-01

European mining industries are the vast industrial sector which contributes largely on their economy which constitutes of ferro and non-ferro metals and minerals industries. The non-ferro metals extraction and processing industries require focus of attention due to sustainability concerns as their manufacturing processes are highly energy intensive and impacts globally on environment. This paper analyses major environmental effects caused by European metal industries based on the life-cycle impact analysis technologies. This research work is the first work in considering the comparative environmental impact analysis of European non-ferro metal industries which will reveal their technological similarities and dissimilarities to assess their environmental loads. The life-cycle inventory datasets are collected from the EcoInvent database while the analysis is done using the CML baseline and ReCipe endpoint method using SimaPro software version 8.4. The CML and ReCipe method are chosen because they are specialized impact assessment methods for European continent. The impact categories outlined for discussion here are human health, global warming and ecotoxicity. The analysis results reveal that the gold industry is vulnerable for the environment due to waste emission and similar result retained by silver mines a little bit. But copper, lead, manganese and zinc mining processes and industries are environment friendly in terms of metal extraction technologies and waste emissions.

LCA and external costs in comparative assessment of electricity chains. Decision support for sustainable electricity provision?

International Nuclear Information System (INIS)

Voss, A.

2002-01-01

The provision of energy and electricity plays an important role in a country's economic and environmental performance and the sustainability of its development. Sustainable development of the energy and electricity sector depends on finding ways of meeting energy service demands of the present generation that are economically viable, environmentally sound, and socially acceptable and do not jeopardize the ability of future generations to meet their own energy needs. Life Cycle Assessment (LCA) and external cost valuation are considered to offer opportunities to assist energy policy in a comprehensive comparative evaluation of electricity supply options with regard to the different dimensions of sustainable energy provision as well as in the implementation of appropriate internalization strategies. The paper addresses life cycle assessment and external cost analysis carried out for selected electricity systems of interest under German conditions. Results from a comprehensive comparative assessment of various electricity supply options with regard to their environmental impacts, health risks, raw materials requirements as well as their resulting external cost will be summarised. The use of LCA based indicators for assessing the relative sustainability of electricity systems and the use of total (internal plus external) cost assessment as measure of economic and environmental efficiency of energy systems will be discussed. Open problems related to life cycle analysis of energy chains and the assessment of environmental damage costs are critically reviewed, to illustrate how in spite of existing uncertainties the state of the art results may provide helpful energy policy decision support. The paper starts with some remarks on what the concept of sustainability in terms of energy systems means. (author)

Multi-indicator assessment of water environment in government environmental auditing

Institute of Scientific and Technical Information of China (English)

HE Gui-zhen; LU Yong-long; MA Hua; WANG Xiao-long

2007-01-01

This study focuses on a multi-indicator assessment methodology for governmental environmental auditing of water protection programs. The environmental status of Wuli Lake in China was assessed using the global indicators (driver-status-response) developed by the CSD, and four additional indicators proposed by the author- water quality, pollution load, aquatic ecosystem status and lake sediment deposition. Various hydrological, chemical, biological and environmental parameters were used to estimate the values of the indicators for assessment of environmental status of the lake based on time series data sets for twenty years. The indicators proposed can be customized to meeting the needs for particular assessment of water protection programs. This method can be used to evaluate the performance of national environmental protection programs and provide technical support for environmental auditors.

Managing Air Quality - Human Health, Environmental and Economic Assessments

Science.gov (United States)

Human health and environmental assessments characterize health and environmental risks associated with exposure to pollution. Economic assessments evaluate the cost and economic impact of a policy or regulation & can estimate economic benefits.

Proposal of an environmental performance index to assess solid waste treatment technologies

International Nuclear Information System (INIS)

Goulart Coelho, Hosmanny Mauro; Lange, Liséte Celina; Coelho, Lineker Max Goulart

2012-01-01

Highlights: ► Proposal of a new concept in waste management: Cleaner Treatment. ► Development of an index to assess quantitatively waste treatment technologies. ► Delphi Method was carried out so as to define environmental indicators. ► Environmental performance evaluation of waste-to-energy plants. - Abstract: Although the concern with sustainable development and environment protection has considerably grown in the last years it is noted that the majority of decision making models and tools are still either excessively tied to economic aspects or geared to the production process. Moreover, existing models focus on the priority steps of solid waste management, beyond waste energy recovery and disposal. So, in order to help the lack of models and tools aiming at the waste treatment and final disposal, a new concept is proposed: the Cleaner Treatment, which is based on the Cleaner Production principles. This paper focuses on the development and validation of the Cleaner Treatment Index (CTI), to assess environmental performance of waste treatment technologies based on the Cleaner Treatment concept. The index is formed by aggregation (summation or product) of several indicators that consists in operational parameters. The weights of the indicator were established by Delphi Method and Brazilian Environmental Laws. In addition, sensitivity analyses were carried out comparing both aggregation methods. Finally, index validation was carried out by applying the CTI to 10 waste-to-energy plants data. From sensitivity analysis and validation results it is possible to infer that summation model is the most suitable aggregation method. For summation method, CTI results were superior to 0.5 (in a scale from 0 to 1) for most facilities evaluated. So, this study demonstrates that CTI is a simple and robust tool to assess and compare the environmental performance of different treatment plants being an excellent quantitative tool to support Cleaner Treatment implementation.

The assessment of eco-design with a comprehensive index incorporating environmental impact and economic profit

Science.gov (United States)

Yang, Shuo; Fu, Yun; Wang, Xiuteng; Xu, Bingsheng; Li, Zheng

2017-11-01

Eco-design is an advanced design approach which plays an important part in the national innovation project and serves as a key point for the successful transformation of the supply structure. However, the practical implementation of the pro-environmental designs and technologies always faces a dilemma situation, where some processes can effectively control their emissions to protect the environment at relatively high costs, while others pursue the individual interest in making profit by ignoring the possible adverse environmental impacts. Thus, the assessment on the eco-design process must be carried out based on the comprehensive consideration of the economic and environmental aspects. Presently, the assessment systems in China are unable to fully reflect the new environmental technologies regarding their innovative features or performance. Most of the assessment systems adopt scoring method based on the judgments of the experts, which are easy to use but somewhat subjective. The assessment method presented in this paper includes the environmental impact (EI) assessment based on LCA principal and willingness-to-pay theory, and economic profit (EP) assessment mainly based on market price. The results from the assessment are in the form of EI/EP, which evaluate the targeted process from a combined perspective of environmental and economic performance. A case study was carried out upon the utilization process of coal fly ash, which indicates the proposed method can compare different technical processes in an effective and objective manner, and provide explicit and insightful suggestions for decision making.

Comparative life cycle assessment (LCA) of biodiesel and fossil diesel fuel

International Nuclear Information System (INIS)

Spirinckx, C.; Xeuterick, D.

1997-01-01

Complementary to VlTO's demonstration project on the use of biodiesel as engine fuel (including on the road emission measurements) in Flanders, Belgium, a comparative life cycle assessment (LCA) has been carried out for rapeseed methyl ester (RME) and fossil diesel fuel. The primary concern of this study is the question as to whether or not the production of biodiesel is comparable to the production of fossil diesel fuel from an environmental point of view, taking into account all stages of the life cycle of these two products. The study covers: (1) a description of the LCA methodology used; (2) a definition of the goal and scope of the study: (3) an inventory of the consumption of energy and materials and the discharges to the environment, from the cradle to the grave, for both alternative fuels: (4) a comparative impact assessment; and (5) the interpretation of the results. The results of this comparative LCA can be used in the final decision making process next to the results of a social and economical assessment. 6 refs

An assessment methodology of environmental risks associated with radioactive waste management

International Nuclear Information System (INIS)

Goldberg, S.M.; Logan, S.E.; Berbano, M.C.

1977-01-01

One major environmental concern associated with the projected increase in nuclear power generation is the treatment and storage or disposal of radioactive wastes. The US Environmental Protection Agency (EPA), in collaboration with the University of New Mexico, has been developing a detailed assessment methodology of short- and long-term quantitative risks to the environment resulting from release of radionuclides during all phases of radioactive waste management operations. The paper describes a comprehensive model developed during 1976 for the public health and environmental impacts from the disposal of high-level and transuranic waste in geological formations. Parametric studies have been performed with this model for various geological disposal media and for waste in different forms. EPA has planned to utilize these parametric risk calculations to translate probabilities and consequences of risk occurrences into a cost-effectiveness perspective for decision-making purposes. This comprehensive model consisted of a release or fault-tree model, an environmental model and an economic model. Fault trees have been constructed to provide the relationships between various geophysical, meteorological and man-caused events which are potential mechanisms for release of radioactive material to the environment from waste repositories. The environmental model includes transport to and accumulations at various receptors in the biosphere, including a determination of pathways from environmental input concentrations to radiation dose to man. Finally, the economic results are used to compare and assess the various disposal concepts as a basis for formulating policy decisions. Implementation of this assessment methodology is possible for a whole range of radioactive and non-radioactive hazardous materials which require perpetual care. Further, the output will be used by EPA in the short term to develop general environmental standards applicable to any radioactive waste management

An assessment methodology of environmental risks associated with radioactive waste management

International Nuclear Information System (INIS)

Goldberg, S.M.; Logan, S.E.; Brebano, M.C.

1977-01-01

One of the major environmental concerns associated with the projected increase in nuclear power generation is the treatment and storage or disposal of radioactive wastes. The U.S. Environmental Protection Agency (EPA) in collaboration with the University of New Mexico has been developing a detailed assessment methodology of both the short-term as well as long-term quantitative risks on the environment resulting from the release of radionuclides during all phases of radioactive waste management operations. This past year a comprehensive model has been developed for the public health and environmental impacts from the disposal of high-level and transuranic waste in geological formations. Parametric studies have been performed with this model for various geological disposal media and for waste in different forms. EPA has planned to utilize these parametric risk calculations to translate probabilities and consequences of risk occurrences into a cost-effectiveness perspective for decision-making purposes. This comprehensive model has consisted of a release or fault tree model, an environmental model, and an economic model. Fault trees have been constructed to provide the relationships between various geophysical, meteorological, and man-caused events which are potential mechanisms for release of radioactive material to the environment from waste repositories. The environmental model includes the transport to and accumulations at various receptors in the biosphere, including a determination of pathways from environmental input concentrations to radiation dose to man. Finally, the economic results are used to compare and assess the various disposal concepts as a basis for formulating policy decisions. Implementation of this assessment methodology is possible for a whole range of both radioactive as well as non-radioactive hazardous materials which require perpetual care. Further, the output will be used by EPA in the short-term to develop general environmental standards

76 FR 48119 - Oral Rabies Vaccine Trial; Availability of a Risk Assessment and an Environmental Assessment

Science.gov (United States)

2011-08-08

...] Oral Rabies Vaccine Trial; Availability of a Risk Assessment and an Environmental Assessment AGENCY... environmental assessment relative to an oral rabies vaccination field trial in West Virginia. The environmental... rabies vaccine, analyzes the use of that vaccine in field safety and efficacy trials in West Virginia...

Impact Assessment and Environmental Evaluation of Various Ammonia Production Processes.

Science.gov (United States)

Bicer, Yusuf; Dincer, Ibrahim; Vezina, Greg; Raso, Frank

2017-05-01

In the current study, conventional resources-based ammonia generation routes are comparatively studied through a comprehensive life cycle assessment. The selected ammonia generation options range from mostly used steam methane reforming to partial oxidation of heavy oil. The chosen ammonia synthesis process is the most common commercially available Haber-Bosch process. The essential energy input for the methods are used from various conventional resources such as coal, nuclear, natural gas and heavy oil. Using the life cycle assessment methodology, the environmental impacts of selected methods are identified and quantified from cradle to gate. The life cycle assessment outcomes of the conventional resources based ammonia production routes show that nuclear electrolysis-based ammonia generation method yields the lowest global warming and climate change impacts while the coal-based electrolysis options bring higher environmental problems. The calculated greenhouse gas emission from nuclear-based electrolysis is 0.48 kg CO 2 equivalent while it is 13.6 kg CO 2 per kg of ammonia for coal-based electrolysis method.

34 CFR 75.601 - Applicant's assessment of environmental impact.

Science.gov (United States)

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Applicant's assessment of environmental impact. 75.601... Conditions Must Be Met by a Grantee? Construction § 75.601 Applicant's assessment of environmental impact. An applicant shall include with its application its assessment of the impact of the proposed construction on...

Review and environmental impact assessment of green technologies for base courses in bituminous pavements

Energy Technology Data Exchange (ETDEWEB)

Anthonissen, Joke, E-mail: joke.anthonissen@uantwerpen.be [Faculty of Applied Engineering, University of Antwerp, Rodestraat 4, 2000 Antwerp (Belgium); Van den bergh, Wim, E-mail: wim.vandenbergh@uantwerpen.be [Faculty of Applied Engineering, University of Antwerp, Rodestraat 4, 2000 Antwerp (Belgium); Braet, Johan, E-mail: johan.braet@uantwerpen.be [Department Engineering Management, Faculty of Applied Economics, University of Antwerp, Prinsstraat 13, 2000 Antwerp (Belgium)

2016-09-15

This paper provides a critical review of different approaches applied in the Belgian asphalt sector in order to reduce the environmental impact of bituminous road construction works. The focus is on (1) reusing reclaimed asphalt pavement, (2) reducing the asphalt production temperature, and (3) prolonging the service life of the pavement. Environmental impact assessment of these methods is necessary to be able to compare these approaches and understand better the ability to reduce the environmental impact during the life cycle of the road pavement. Attention should be drawn to the possible shift in environmental impact between various life cycle stages, e.g., raw material production, asphalt production, or waste treatment. Life cycle assessment is necessary to adequately assess the environmental impact of these approaches over the entire service life of the bituminous pavement. The three approaches and their implementation in the road sector in Flanders (region in Belgium) are described and the main findings from life cycle assessment studies on these subjects are discussed. It was found from the review that using reclaimed asphalt pavement in new bituminous mixtures might yield significant environmental gains. The environmental impact of the application of warm mix asphalt technologies, on the other hand, depends on the technique used. - Highlights: • Recycling, lower production temperature and durability of asphalt are investigated. • The use of RAP in new asphalt mixtures yields significant environmental advantages. • It would be beneficial to allow RAP in asphalt mixtures for wearing courses. • The use of particular additives might counteract the environmental gain from WMA. • The service life and the environmental data source influence the LCA results.

Review and environmental impact assessment of green technologies for base courses in bituminous pavements

International Nuclear Information System (INIS)

Anthonissen, Joke; Van den bergh, Wim; Braet, Johan

2016-01-01

This paper provides a critical review of different approaches applied in the Belgian asphalt sector in order to reduce the environmental impact of bituminous road construction works. The focus is on (1) reusing reclaimed asphalt pavement, (2) reducing the asphalt production temperature, and (3) prolonging the service life of the pavement. Environmental impact assessment of these methods is necessary to be able to compare these approaches and understand better the ability to reduce the environmental impact during the life cycle of the road pavement. Attention should be drawn to the possible shift in environmental impact between various life cycle stages, e.g., raw material production, asphalt production, or waste treatment. Life cycle assessment is necessary to adequately assess the environmental impact of these approaches over the entire service life of the bituminous pavement. The three approaches and their implementation in the road sector in Flanders (region in Belgium) are described and the main findings from life cycle assessment studies on these subjects are discussed. It was found from the review that using reclaimed asphalt pavement in new bituminous mixtures might yield significant environmental gains. The environmental impact of the application of warm mix asphalt technologies, on the other hand, depends on the technique used. - Highlights: • Recycling, lower production temperature and durability of asphalt are investigated. • The use of RAP in new asphalt mixtures yields significant environmental advantages. • It would be beneficial to allow RAP in asphalt mixtures for wearing courses. • The use of particular additives might counteract the environmental gain from WMA. • The service life and the environmental data source influence the LCA results.

Discussion on the post-project assessment of environmental impact for nuclear facilities

International Nuclear Information System (INIS)

Shang Zhaorong

2013-01-01

The paper introduces the background of post-project assessment of environmental impact in the world and focuses on the characteristic of environmental impact assessment for Chinese nuclear facilities construction projects, analyzes the necessity, principle and contents of post-project assessment of environmental impact on current Chinese nuclear facilities operation. It is considered that to start the post-project assessment of environmental impact, perfect the post-project assessment mechanism, introduce the post-project assessment into environmental impact assessment system are just at the night time. (author)

Comparative assessment of nuclear power and other energy sources: the DECADES project

International Nuclear Information System (INIS)

Bennett, L.L.

1996-01-01

The environmental and health related impacts of different energy systems are emerging as significant issues. To promote international cooperation in this field, the inter-agency project on databases and methodologies for comparative assessment of different energy sources for electricity generation, called DECADES, was established at the end of 1992. In October 1995 was held the International Symposium on ''Electricity, Health and the Environment - Comparative Assessment in Support of Decision Making''. Through its programs and activities, the IAEA plays a leading role, in cooperation with other organizations, in the DECADES project, to examine areas in which international expertise and support can best be applied to assist national policy and decision makers in objectively and comprehensively assessing their energy systems and strategies

Biodiversity in environmental assessment-current practice and tools for prediction

International Nuclear Information System (INIS)

Gontier, Mikael; Balfors, Berit; Moertberg, Ulla

2006-01-01

Habitat loss and fragmentation are major threats to biodiversity. Environmental impact assessment and strategic environmental assessment are essential instruments used in physical planning to address such problems. Yet there are no well-developed methods for quantifying and predicting impacts of fragmentation on biodiversity. In this study, a literature review was conducted on GIS-based ecological models that have potential as prediction tools for biodiversity assessment. Further, a review of environmental impact statements for road and railway projects from four European countries was performed, to study how impact prediction concerning biodiversity issues was addressed. The results of the study showed the existing gap between research in GIS-based ecological modelling and current practice in biodiversity assessment within environmental assessment

Strategic environmental assessment for UK LLW management - 16392

International Nuclear Information System (INIS)

Craze, Andrew; Clark, Matthew; Davis, Pete

2009-01-01

NDA is delivering a Strategic Environmental Assessment (SEA) to underpin the UK Nuclear Industry Low Level Waste Strategy. The purpose of this assessment is embed sustainability issues into our decision making and to fulfill our requirements under the European Union's Strategic Environmental Assessment (SEA) Directive (2004/42/EU) and transposing UK Regulations, and to underpin the development of the strategy. The outputs of the SEA have provided input into particular aspects of the strategy, leading to a more robust and better informed result. Development of options to be assessed under the SEA has looked at a number of factors, including: - what the strategy is aiming to achieve - expectation from stakeholders as to what should be addressed - consideration of tactical approaches to implementation of the strategy in addition to high level strategic issues - links to other projects and programmes (for example the Environmental Safety Case for the Low Level Waste Repository. The SEA aims to provide a robust assessment of the environmental and sustainability impacts of alternative strategies for providing continued capability and capacity for the management and disposal of LLW in the UK. The assessment also considers other, more tactical, issues around implementation of the strategy, for example: issues around the location of LLW management facilities; the environmental impacts of alternative waste treatment options (metal recycling etc); considerations of alternative approaches to the classification of radioactive waste and opportunities that would result. Critical to the development of the SEA has been the involvement of statutory and non-statutory stakeholders, who have informed both the output and the approach taken. (authors)

Assessing the state of environmental quality in cities – A multi-component urban performance (EMCUP) index

International Nuclear Information System (INIS)

Stossel, Zeev; Kissinger, Meidad; Meir, Avinoam

2015-01-01

Urban environmental quality indices can provide policy makers and the public with valuable information. However, common assessment tools have several shortcomings: most indices do leave out some important components of the state of urban environmental quality; they use a relative assessment in which urban environmental performance is evaluated relative to other cities, not against established environmental benchmarks; and only a few assessment tools compare urban performance to environmental quality standards. This paper presents a new multi component urban performance (EMCUP) index aiming to tackle those shortcomings. It analyses the overall state of urban environmental quality by using a list of indicators to evaluate key urban environmental quality topics such as air, water, open space, sanitation and solid waste. It presents an absolute score calculated in relation to both the standard and desired optimum levels. The use of the index is demonstrated by three Israeli cities. - Highlights: • The index provides a new framework for analyzing the overall urban environmental quality. • The index scores are calculated based on environmental standards and desired optimum benchmark values. • The paper demonstrates the gap between the state of existing urban environmental quality and the desired goals. - Introducing a multi component urban performance (EMCUP) index, which measures urban environmental quality related to environmental benchmarks.

Environmental Life Cycle Assessment of long-term organic rice production in a Subtropical area of China

DEFF Research Database (Denmark)

Xueqing, He; Qiao, Yuhui; Liang, Long

2018-01-01

a considerable environmental impact and changing from conventional to organic rice cultivation might therefore have a potentially great impact. Meanwhile, it takes time for the organic farming systems to reach a new steady state after conversion to organic. Thus, the environmental profile of the organic products...... will change over time and it is therefore important to examine whether the difference to conventional will be reduced (and disappear) or be increased over time. The aim of the present study was therefore to assess the environmental impact of organic rice production 5 (OR5), 10 (OR10) and 15 (OR15) years since...... conversion and compare it to conventional rice (CR) in subtropical China. The life cycle assessment (LCA) method was used to assess environmental impact of rice production systems with regard to nine environmental impact categories: Non-renewable Energy Depletion (NED), Water Depletion (WD), Land Occupation...

Environmental radiation exposure: Regulation, monitoring, and assessment

International Nuclear Information System (INIS)

Chen, S.Y.; Yu, C.; Hong, K.J.

1991-01-01

Radioactive releases to the environment from nuclear facilities constitute a public health concern. Protecting the public from such releases can be achieved through the establishment and enforcement of regulatory standards. In the United States, numerous standards have been promulgated to regulate release control at nuclear facilities. Most recent standards are more restrictive than those in the past and require that radioactivity levels be as low as reasonably achievable (ALARA). Environmental monitoring programs and radiological dose assessment are means of ensuring compliance with regulations. Environmental monitoring programs provide empirical information on releases, such as the concentrations of released radioactivity in environmental media, while radiological dose assessment provides the analytical means of quantifying dose exposures for demonstrating compliance

Environmental assessment of the Carlsbad Environmental Monitoring and Research Center Facility

International Nuclear Information System (INIS)

1995-10-01

This Environmental Assessment has been prepared to determine if the Carlsbad Environmental Monitoring and Research Center (the Center), or its alternatives would have significant environmental impacts that must be analyzed in an Environmental Impact Statement. DOE's proposed action is to continue funding the Center. While DOE is not funding construction of the planned Center facility, operation of that facility is dependent upon continued funding. To implement the proposed action, the Center would initially construct a facility of approximately 2,300 square meters (25,000 square feet). The Phase 1 laboratory facilities and parking lot will occupy approximately 1.2 hectares (3 acres) of approximately 8.9 hectares (22 acres) of land which were donated to New Mexico State University (NMSU) for this purpose. The facility would contain laboratories to analyze chemical and radioactive materials typical of potential contaminants that could occur in the environment in the vicinity of the DOE Waste Isolation Pilot Plant (WIPP) site or other locations. The facility also would have bioassay facilities to measure radionuclide levels in the general population and in employees of the WIPP. Operation of the Center would meet the DOE requirement for independent monitoring and assessment of environmental impacts associated with the planned disposal of transuranic waste at the WIPP

Environmental assessment of the Carlsbad Environmental Monitoring and Research Center Facility

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-01

This Environmental Assessment has been prepared to determine if the Carlsbad Environmental Monitoring and Research Center (the Center), or its alternatives would have significant environmental impacts that must be analyzed in an Environmental Impact Statement. DOE`s proposed action is to continue funding the Center. While DOE is not funding construction of the planned Center facility, operation of that facility is dependent upon continued funding. To implement the proposed action, the Center would initially construct a facility of approximately 2,300 square meters (25,000 square feet). The Phase 1 laboratory facilities and parking lot will occupy approximately 1.2 hectares (3 acres) of approximately 8.9 hectares (22 acres) of land which were donated to New Mexico State University (NMSU) for this purpose. The facility would contain laboratories to analyze chemical and radioactive materials typical of potential contaminants that could occur in the environment in the vicinity of the DOE Waste Isolation Pilot Plant (WIPP) site or other locations. The facility also would have bioassay facilities to measure radionuclide levels in the general population and in employees of the WIPP. Operation of the Center would meet the DOE requirement for independent monitoring and assessment of environmental impacts associated with the planned disposal of transuranic waste at the WIPP.

40 CFR 8.9 - Measures to assess and verify environmental impacts.

Science.gov (United States)

2010-07-01

... environmental impacts. 8.9 Section 8.9 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL ENVIRONMENTAL IMPACT ASSESSMENT OF NONGOVERNMENTAL ACTIVITIES IN ANTARCTICA § 8.9 Measures to assess and verify environmental impacts. (a) The operator shall conduct appropriate monitoring of key environmental indicators as...

Comparing environmental issues in Cuba before and after the Special Period: balancing sustainable development and survival.

Science.gov (United States)

Maal-Bared, Rasha

2006-04-01

Following the Earth Summit in 1992, Cuba designed and implemented a variety of programs, administrative structures, and public awareness activities to promote sound environmental management and sustainable development. This came shortly after the fall of the Soviet Union and the strengthening of the US blockade in 1990, which resulted in a 35% drop in Cuban GDP. This period, referred to as the Special Period, witnessed a decrease in many environmentally damaging activities both by choice and by necessity, but also resulted in many decisions to resuscitate the Cuban economy. The purpose of this work was to compare and rank the environmental risks Cuba faced before and during the Special Period (1990-2000) using two Comparative environmental risk assessments (CERAs). To do so, an ecosystem integrity risk assessment matrix was constructed with 42 risk end points. The matrix assessed the risk posed by 17 problem areas including air pollution, water contamination, solid waste sites, pesticides and ecosystem degradation. The risks were calculated using five criteria: area affected, vulnerability of affected population, severity of impact, irreversibility of effect and uncertainty. To construct this matrix, both literature reviews and expert interviews in Cuba were conducted in 2000. The results showed a general decrease in risk scores during the Special Period. Before the Special Period, high risks were posed by: terrestrial degradation and industrial wastewater and sludge, followed by freshwater degradation, surface water stressors, and pesticides. After the Special Period, industrial wastewater and sludge and pesticides were no longer high-risk areas, but municipal wastewater and marine coastal degradation ranked higher than previously. Also, the risk endpoints most stressed after 1990 were affected by activities controlled by the government, such as mining and tourism, and lack of infrastructure. Therefore, the claims that public environmental education is the main

Improving environmental impact and cost assessment for supplier evaluation

Science.gov (United States)

Beucker, Severin; Lang, Claus

2004-02-01

Improving a company"s environmental and financial performance necessitates the evaluation of environmental impacts deriving from the production and cost effects of corporate actions. These effects have to be made transparent and concrete targets have to be developed. Such an evaluation has to be done on a regular basis but with limited expenses. To achieve this, different instruments of environmental controlling such as LCA and environmental performance indicators have to be combined with methods from cost accounting. Within the research project CARE (Computer Aided Resource Efficiency Accounting for Medium-Sized Enterprises), the method Resource Efficiency Accounting (REA) is used to give the participating companies new insights into hidden costs and environmental effects of their production and products. The method combines process based cost accounting with environmental impact assessment methodology and offers results that can be integrated into a company"s environmental controlling system and business processes like cost accounting, supplier assessment, etc. Much of the data necessary for the combined assessment can be available within a company"s IT system and therefore can be efficiently used for the assessment process. The project CARE puts a strong focus on the use of company data and information systems for the described assessment process and offers a methodological background for the evaluation and the structuring of such data. Besides the general approach of the project CARE the paper will present results from a case study in which the described approach is used for the evaluation of suppliers.

Environmental assessment [of nuclear installations

International Nuclear Information System (INIS)

Townsley, M.

1989-01-01

The European Community has introduced a directive which instructs that for all projects likely to have a significant effect on the environment consent should only be given after a rigorous assessment of such effects has been carried out and presented as an environmental statement. Projects requiring environmental assessment include nuclear power stations, any thermal power station over 300MW, any radioactive waste storage or disposal facility, any installation which produces electricity, power lines, installations for fuel production, fuel reprocessing, radioactive waste processing and fuel enrichment. The statement must include a description of the likely effects, direct and indirect, on the environment of the development, with reference to human beings, flora, fauna, soil, water, air, climate, landscape, interactions of two or more of these, material assets and cultural heritage. Measures to avoid or remedy the impact must be included. (U.K.)

Assessing the Environmental Risks of Nanomaterials

DEFF Research Database (Denmark)

Grieger, Khara Deanne; Hansen, Steffen Foss; Baun, Anders

to a wide range of technical limitations. For instance, serious knowledge gaps remain within e.g. the detection of NM in the environment, developing adequate testing equipment and protocols, and toxicity endpoints (Grieger et al., 2009). In the past few years, many scientists and organizations have...... considered. Furthermore, we recommend the use of biomonitoring in some environmental ‘hot spots’ to serve as early warning detectors while the field of NM environmental risk assessment matures, as recommended in our previous work. Ultimately, this analysis may aid the advancement of environmental risk...

Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products, Part 3: LED Environmental Testing

Energy Technology Data Exchange (ETDEWEB)

Tuenge, Jason R.; Hollomon, Brad; Dillon, Heather E.; Snowden-Swan, Lesley J.

2013-03-01

This report covers the third part of a larger U.S. Department of Energy (DOE) project to assess the life-cycle environmental and resource impacts in the manufacturing, transport, use, and disposal of light-emitting diode (LED) lighting products in relation to incumbent lighting technologies. All three reports are available on the DOE website (www.ssl.energy.gov/tech_reports.html). • Part 1: Review of the Life-Cycle Energy Consumption of Incandescent, Compact Fluorescent and LED Lamps; • Part 2: LED Manufacturing and Performance; • Part 3: LED Environmental Testing. Parts 1 and 2 were published in February and June 2012, respectively. The Part 1 report included a summary of the life-cycle assessment (LCA) process and methodology, provided a literature review of more than 25 existing LCA studies of various lamp types, and performed a meta-analysis comparing LED lamps with incandescent and compact fluorescent lamps (CFLs). Drawing from the Part 1 findings, Part 2 performed a more detailed assessment of the LED manufacturing process and used these findings to provide a comparative LCA taking into consideration a wider range of environmental impacts. Both reports concluded that the life-cycle environmental impact of a given lamp is dominated by the energy used during lamp operation—the upstream generation of electricity drives the total environmental footprint of the product. However, a more detailed understanding of end-of-life disposal considerations for LED products has become increasingly important as their installation base has grown. The Part 3 study (reported herein) was undertaken to augment the LCA findings with chemical analysis of a variety of LED, CFL, and incandescent lamps using standard testing procedures. A total of 22 samples, representing 11 different models, were tested to determine whether any of 17 elements were present at levels exceeding California or Federal regulatory thresholds for hazardous waste. Key findings include: • The selected

Comparative environmental analysis of waste brominated plastic thermal treatments

International Nuclear Information System (INIS)

Bientinesi, M.; Petarca, L.

2009-01-01

The aim of this research activity is to investigate the environmental impact of different thermal treatments of waste electric and electronic equipment (WEEE), applying a life cycle assessment methodology. Two scenarios were assessed, which both allow the recovery of bromine: (A) the co-combustion of WEEE and green waste in a municipal solid waste combustion plant, and (B) the staged-gasification of WEEE and combustion of produced syngas in gas turbines. Mass and energy balances on the two scenarios were set and the analysis of the life cycle inventory and the life cycle impact assessment were conducted. Two impact assessment methods (Ecoindicator 99 and Impact 2002+) were slightly modified and then used with both scenarios. The results showed that scenario B (staged-gasification) had a potentially smaller environmental impact than scenario A (co-combustion). In particular, the thermal treatment of staged-gasification was more energy efficient than co-combustion, and therefore scenario B performed better than scenario A, mainly in the impact categories of 'fossil fuels' and 'climate change'. Moreover, the results showed that scenario B allows a higher recovery of bromine than scenario A; however, Br recovery leads to environmental benefits for both the scenarios. Finally the study demonstrates that WEEE thermal treatment for energy and matter recovery is an eco-efficient way to dispose of this kind of waste

Environmental Performance of Kettle Production: Product Life Cycle Assessment

Science.gov (United States)

Marcinkowski, Andrzej; Zych, Krzysztof

2017-12-01

The main objective of this paper is to compare the environmental impact caused by two different types of water boiling processes. The aim was achieved thanks to product life cycle assessment (LCA) conducted for stovetop and electric kettles. A literature review was carried out. A research model was worked out on the basis of data available in literature as well as additional experiments. In order to have a better opportunity to compare LCA results with reviewed literature, eco-indicator 99 assessment method was chosen. The functional unit included production, usage and waste disposal of each product (according to from cradle to grave approach) where the main function is boiling 3360 l of water during 4-year period of time. A very detailed life cycle inventory was carried out. The mass of components was determined with accuracy of three decimal places (0.001 g). The majority of environmental impact is caused by electricity or natural gas consumption during usage stage: 92% in case of the electric and kettle and 99% in case of stovetop one. Assembly stage contributed in 7% and 0.8% respectively. Uncertainty and sensitivity analyses took into consideration various waste scenario patterns as well as demand for transport. Environmental impact turned out to be strongly sensitive to a chosen pattern of energy delivery (electricity mix) which determined final comparison results. Basing on LCA results, some improvements of products were suggested. The boiling time optimization was pointed out for electric kettle's efficiency improvement. Obtained results can be used by manufacturers in order to improve their eco-effectiveness. Moreover, conclusions following the research part can influence the future choices of home appliances users.

ENVIRONMENTAL PERFORMANCE OF KETTLE PRODUCTION: PRODUCT LIFE CYCLE ASSESSMENT

Directory of Open Access Journals (Sweden)

Andrzej MARCINKOWSKI

2017-10-01

Full Text Available The main objective of this paper is to compare the environmental impact caused by two different types of water boiling processes. The aim was achieved thanks to product life cycle assessment (LCA conducted for stovetop and electric kettles. A literature review was carried out. A research model was worked out on the basis of data available in literature as well as additional experiments. In order to have a better opportunity to compare LCA results with reviewed literature, eco-indicator 99 assessment method was chosen. The functional unit included production, usage and waste disposal of each product (according to from cradle to grave approach where the main function is boiling 3360 l of water during 4- year period of time. A very detailed life cycle inventory was carried out. The mass of components was determined with accuracy of three decimal places (0.001 g. The majority of environmental impact is caused by electricity or natural gas consumption during usage stage: 92% in case of the electric and kettle and 99% in case of stovetop one. Assembly stage contributed in 7% and 0.8% respectively. Uncertainty and sensitivity analyses took into consideration various waste sce-nario patterns as well as demand for transport. Environmental impact turned out to be strongly sensitive to a chosen pattern of energy delivery (electricity mix which determined final comparison results. Basing on LCA results, some im-provements of products were suggested. The boiling time optimization was pointed out for electric kettle's efficiency improvement. Obtained results can be used by manufacturers in order to improve their eco-effectiveness. Moreover, conclusions following the research part can influence the future choices of home appliances users.

A statistical proposal for environmental impact assessment of development projects

International Nuclear Information System (INIS)

Plazas C, Julian A; De J Lema T, Alvaro; Leon P, Juan Diego

2009-01-01

Environmental impact assessment of development projects is a fundamental process, which main goal is to avoid that their construction and functioning, lead to serious and negative consequences on the environment. Some of the most important limitations of the models employed to assess environmental impacts, are the subjectivity of its parameters and weights, and the multicolineality among the variables, which represent high quantities of similar information. This work presents a multivariate statistical-based method that tries to diminish such limitations. For this purpose, environmental impact assessment, is valuated through different environmental impact attributes and environmental elements, synthesized in an environmental quality index (ICA in Spanish). ICA can be applied at different levels, such as at a project level, or applied only at a partial level on one or some environmental components.

Life cycle assessment of energy products: environmental impact assessment of biofuels; Ecobilan d'agents energetiques. Evaluation ecologique de biocarburants

Energy Technology Data Exchange (ETDEWEB)

Zah, R.; Boeni, H.; Gauch, M.; Hischier, R.; Lehmann, M.; Waeger, P.

2007-05-15

This final report for the Swiss Federal Office of Energy (SFOE) deals with the results of a study that evaluated the environmental impact of the entire production chain of fuels made from biomass and used in Switzerland. Firstly, the study supplies an analysis of the possible environmental impacts of biofuels that can be used as a basis for political decisions. Secondly, an environmental life cycle assessment (LCA) of various biofuels is presented. In addition, the impacts of fuel use are compared with other uses for bioenergy such as the generation of electricity and heat. The methods used in the LCA are discussed, including the Swiss method of ecological scarcity (Environmental Impact Points, UBP 06), and the European Eco-indicator 99 method. The results of the study are discussed, including the finding that not all biofuels can reduce environmental impacts as compared to fossil fuels. The role to be played by biofuels produced in an environmentally-friendly way together with other forms of renewable energy in our future energy supply is discussed.

Health assessment of environmental pollutants: proliferative and degenerative diseases

International Nuclear Information System (INIS)

Stuart, B.O.

1988-01-01

In order to achieve a balanced approach to risk assessment between carcinogenic and non-carcinogenic health effects one must examine the risk of disease or death in the general population exposed to a particular air pollutant that can be related quantitatively to intensity and duration of exposures (National Academy of Sciences, 1983). Such risk assessment should be based upon careful evaluation of scientific findings of dose-response relationships in the chronically exposed population. Quantitative assessment of environmentally produced disease in man has proven to be complex and demanding. A variety of factors play important roles in this task. As an example, there are induction-latency periods for chronic diseases, including cancer, which may range from five to twenty-five years. The diseases themselves, whether proliferative or degenerative, may follow several stages of progression. There is only sparse epidemiological data on serious health effects that may be due to environmental as compared to occupational exposures. Exposures to chemical or radiological air contaminants do not occur singly but to a multiplicity of agents, and disease processes are frequently markedly affected by the interaction of a variety of factors, particularly that of cigarette smoking. There is growing recognition of potentially sensitive subpopulations, including the elderly and the very young, but adequate techniques for assessing the magnitude of increased risks to these groups have not yet been developed

Quantitative assessments of municipal waste management systems: using different indicators to compare and rank programs in New York State.

Science.gov (United States)

Greene, Krista L; Tonjes, David J

2014-04-01

The primary objective of waste management technologies and policies in the United States is to reduce the harmful environmental impacts of waste, particularly those relating to energy consumption and climate change. Performance indicators are frequently used to evaluate the environmental quality of municipal waste systems, as well as to compare and rank programs relative to each other in terms of environmental performance. However, there currently is no consensus on the best indicator for performing these environmental evaluations. The purpose of this study is to examine the common performance indicators used to assess the environmental benefits of municipal waste systems to determine if there is agreement between them regarding which system performs best environmentally. Focus is placed on how indicator selection influences comparisons between municipal waste management programs and subsequent system rankings. The waste systems of ten municipalities in the state of New York, USA, were evaluated using each common performance indicator and Spearman correlations were calculated to see if there was a significant association between system rank orderings. Analyses showed that rank orders of waste systems differ substantially when different indicators are used. Therefore, comparative system assessments based on indicators should be considered carefully, especially those intended to gauge environmental quality. Insight was also gained into specific factors which may lead to one system achieving higher rankings than another. However, despite the insufficiencies of indicators for comparative quality assessments, they do provide important information for waste managers and they can assist in evaluating internal programmatic performance and progress. To enhance these types of assessments, a framework for scoring indicators based on criteria that evaluate their utility and value for system evaluations was developed. This framework was used to construct an improved model for

E-IMPACT - A ROBUST HAZARD-BASED ENVIRONMENTAL IMPACT ASSESSMENT APPROACH FOR PROCESS INDUSTRIES

Directory of Open Access Journals (Sweden)

KHANDOKER A. HOSSAIN

2008-04-01

Full Text Available This paper proposes a hazard-based environmental impact assessment approach (E-Impact, for evaluating the environmental impact during process design and retrofit stages. E-Impact replaces the normalisation step of the conventional impact assessment phase. This approach compares the impact scores for different options and assigns a relative score to each option. This eliminates the complexity of the normalisation step in the evaluation phase. The applicability of the E-Impact has been illustrated through a case study of solvent selection in an acrylic acid manufacturing plant. E-Impact is used in conjunction with Aspen-HYSYS process simulator to develop mass and heat balance data.

Is Environmental Impact Assessment fulfilling its potential?

DEFF Research Database (Denmark)

Larsen, Sanne Vammen

2014-01-01

fuel with CO2-neutral energy sources. A variety of these projects are subject to environmental impact assessment (EIA), which raises the following questions: What role does an impact assessment play? When is the project environmentally friendly? How are climate change-related impacts assessed......One of the topics receiving much attention in recent years is climate change and the potential of its integration in impact assessment, both in terms of achieving mitigation and adaptation. Renewable energy projects are part of the efforts to mitigate climate change, replacing the use of fossil...... adaptation is absent. Also, the results show an emphasis on positive impacts in the reports, and in a few cases discussions of enhancements. Identification and assessment of negative climate change impacts are less apparent. This leads to a discussion of the results in the light of the purpose of EIA....

Risk analysis within environmental impact assessment of proposed construction activity

Energy Technology Data Exchange (ETDEWEB)

Zeleňáková, Martina; Zvijáková, Lenka

2017-01-15

Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

Risk analysis within environmental impact assessment of proposed construction activity

International Nuclear Information System (INIS)

Zeleňáková, Martina; Zvijáková, Lenka

2017-01-01

Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

Environmental Impact Assessment (EIA, Strategic Environmental Assessment (SEA and Sustainability in Minas Gerais

Directory of Open Access Journals (Sweden)

Evandro Sanguinetto

2011-07-01

Full Text Available This paper was aimed at conducting a bibliographical research on Environmental Impact Assessment (EIA, Strategic Environmental Assessment (SEA and their relation to the Ecological Economic Zoning (EEZ in the state of Minas Gerais. It is believed that the EIA is subject to failures as it does not take into account larger impacts upon space, time, cumulative and synergistic effects, whereas reflecting a reductionist point of view of the undertaking to the detriment of a broader, systemic, holistic perspective. With a view to compensate for such failure, the SEA is seen as an appropriate tool for the evaluation of political impacts, plans and programs which, conversely, guides the implementation of projects in an more integrated manner. Therefore, two EIAs can be used as reference; one refers to a rural electrification program in the state of Minas Gerais and the other approaches the integration planning of water sources in the metropolitan area of the state of São Paulo. While planning the Ecological Economic Zoning of the state, Minas Gerais takes a decisive step forward the reduction of conflicts related with multiple interests of economic development, providing and forming the basis for the essential balance among profit, preservation and environmental conservation, social justice, respect and cultural diversity, political and institutional maturation, ethic and plurality, which splash the sustainability colors on the canvas of the future.

Health Impact Assessment Practice and Potential for Integration within Environmental Impact and Strategic Environmental Assessments in Italy

Science.gov (United States)

Linzalone, Nunzia; Assennato, Giorgio; Ballarini, Adele; Cadum, Ennio; Cirillo, Mario; Cori, Liliana; De Maio, Francesca; Musmeci, Loredana; Natali, Marinella; Rieti, Sabrina; Soggiu, Maria Eleonora; Bianchi, Fabrizio

2014-01-01

Avoiding or minimizing potential environmental impact is the driving idea behind protecting a population’s health via Environmental Impact Assessments (EIAs) and Strategic Environmental Assessments (SEAs). However, both are often carried out without any systematic approach. This paper describes the findings of a review of HIA, EIA and SEA experiences carried out by the authors, who act as institutional competent subjects at the national and regional levels in Italy. The analysis of how health is tackled in EIA and SEA procedures could support the definition of a protocol for the integration of HIA with EIA and SEA. Although EIA and SEA approaches include the aim of protecting health, significant technical and methodological gaps are present when assessing health systematically, and their basic principles regarding assessment are unsatisfactory for promoting and addressing healthcare concepts stated by the WHO. HIA is still poorly integrated into the decision-making process, screening and monitoring phases are only occasionally implemented, and operational details are not well-defined. The collaborative approach of institutions involved in environment and health is a core element in a systematic advancement toward supporting effective decisions and effective protection of the environment and health. At the Italian national level, the definition of guidelines and tools for HIA, also in relation with EIA and SEA, is of great interest. PMID:25493391

Strategic environmental assessment in post-modern times

International Nuclear Information System (INIS)

Fischer, Thomas B.

2003-01-01

The increasing awareness of the findings of policy and decision making theory in the environmental assessment community has recently led to an intensifying debate on the theoretical foundations and the appropriate practical use of strategic environmental assessment (SEA). In this context, most of the recent suggestions on how to improve practice have been influenced--consciously or sub-consciously--by the post-modernist paradigm, focusing particularly on a better integration of SEA into 'real' decision making and procedural flexibility. There have also been suggestions that traditional project environmental impact assessment (EIA)-based SEA approaches are generally inadequate. Reacting to the latter criticism, this paper aims at defending 'traditional' systematically structured and normative approaches to SEA. While it is acknowledged that a purely professional and technological paradigm to SEA is something of the past, it is proposed that leaving the design of 'flexible' SEA to the will of proponents and stakeholders might ultimately render it incapable of protecting the environment

Environmental assessment of solid waste landfilling technologies by means of LCA-modeling.

Science.gov (United States)

Manfredi, Simone; Christensen, Thomas H

2009-01-01

By using life cycle assessment (LCA) modeling, this paper compares the environmental performance of six landfilling technologies (open dump, conventional landfill with flares, conventional landfill with energy recovery, standard bioreactor landfill, flushing bioreactor landfill and semi-aerobic landfill) and assesses the influence of the active operations practiced on these performances. The environmental assessments have been performed by means of the LCA-based tool EASEWASTE, whereby the functional unit utilized for the LCA is "landfilling of 1ton of wet household waste in a 10m deep landfill for 100 years". The assessment criteria include standard categories (global warming, nutrient enrichment, ozone depletion, photo-chemical ozone formation and acidification), toxicity-related categories (human toxicity and ecotoxicity) and impact on spoiled groundwater resources. Results demonstrate that it is crucially important to ensure the highest collection efficiency of landfill gas and leachate since a poor capture compromises the overall environmental performance. Once gas and leachate are collected and treated, the potential impacts in the standard environmental categories and on spoiled groundwater resources significantly decrease, although at the same time specific emissions from gas treatment lead to increased impact potentials in the toxicity-related categories. Gas utilization for energy recovery leads to saved emissions and avoided impact potentials in several environmental categories. Measures should be taken to prevent leachate infiltration to groundwater and it is essential to collect and treat the generated leachate. The bioreactor technologies recirculate the collected leachate to enhance the waste degradation process. This allows the gas collection period to be reduced from 40 to 15 years, although it does not lead to noticeable environmental benefits when considering a 100 years LCA-perspective. In order to more comprehensively understand the influence

Wind turbine environmental assessment -- Vol 1: Screening document

International Nuclear Information System (INIS)

2000-04-01

The environmental effects of the proposed construction and operation of up to three wind turbines on the Toronto waterfront are evaluated in accordance with the requirements of the Canadian Environmental Assessment Act (CEAA) and Regulations. The nine sections of the report provide background on the environmental assessment and the wind turbine project; provide justification for the project and describes alternative sites and wind turbine technologies; outlines the scope of the project; sketches the biophysical and socio-economic environment; presents an evaluation of the environmental impacts and proposed mitigating measures; describes the public consultation program that was carried out; summarizes the comments received from interested parties; presents the conclusion of the environmental impact assessment; and responds to the public comments received on the draft screening document. Most of the concerns raised involved avoidance reactions by birds, disruption or fragmentation of wildlife, the potential for high kill rate of small nocturnal migrants and young birds, and the effect of noise on breeding birds. The overall recommendation of the consultants is that the project is not likely to cause significant adverse environmental effects and its construction and operations should be authorized. 115 refs., 8 tabs., 2 figs. (14 appendices are in volume 2)

Assessing Environmental Impact on Aquatic Macrophyte Species ...

African Journals Online (AJOL)

Impact of environmental variables on distribution and composition of aquatic macrophyte community in a tropical river was assessed for one year (March 2009 to February 2010). Hypothesis tested was that the spatial variation in environmental variables on the river's longitudinal gradient affects macrophyte species ...

Environmental Warning System Based on the DPSIR Model: A Practical and Concise Method for Environmental Assessment

Directory of Open Access Journals (Sweden)

Wenqi Wang

2018-05-01

Full Text Available Though we are in urgent need of environmental warnings to slow environmental deterioration, currently, there is no internationally concise method for environmental warnings. In addition, the existing approaches do not combine the three aspects of ecology, resources, and environment. At the same time, the three elements of the environment (air, water, and soil are separated in most environmental warning systems. Thus, the method this paper gives is an innovative attempt and aims to make environmental assessment more practical. This paper establishes the index system of an environmental early warning based on the Driving–Pressure–State–Influence–Response (DPSIR model. The Analytic Hierarchy Process (AHP method was used to determine the weights. Next, single and integrated index methods further assess the environmental warning state, in which the weighted summation method is used to summarize the data and results. The case of Tianjin is used to confirm the applicability of this method. In conclusion, the method in this paper is more well-behaved and, therefore, more suitable to assist cities in their environmental assessment.

The environmental impact assessment of uranium mining in Australia

International Nuclear Information System (INIS)

Morvell, G.

2002-01-01

Federal environmental impact assessment legislation has existed in Australia since 1974. A number of uranium mines have been developed in this time, utilizing a range of mining techniques, including opencut, underground and in-situ leach. Projects have also been undertaken in a variety of geographical areas requiring consideration of diverse biodiversity, cultural heritage and social impact issues. Assessment of uranium mining proposals in Australia is also conducted in a climate of political opposition from a cross section of the Australian community. This paper outlines some of the key issues that arose during recent assessments and which provide a lead to the role of environmental impact assessment in environmental policy development. Issues are also relevant to recent assessments on a replacement nuclear reactor, shipments of waste for reprocessing and proposed assessments on proposals for low and intermediate level nuclear waste facilities. (author)

Guidance on the environmental risk assessment of plant pests

DEFF Research Database (Denmark)

Baker, R.; Candresse, T.; Dormannsne Simon, E.

2011-01-01

The European Food Safety Authority (EFSA) requested the Panel on Plant Health to develop a methodology for assessing the environmental risks posed by harmful organisms that may enter, establish and spread in the European Union. To do so, the Panel first reviewed the methods for assessing...... the environmental risks of plant pests that have previously been used in pest risk assessment. The limitations identified by the review led the Panel to define the new methodology for environmental risk assessment which is described in this guidance document. The guidance is primarily addressed to the EFSA PLH...... (biodiversity) and the functional (ecosystem services) aspects of the environment, this new approach includes methods for assessing both aspects for the first time in a pest risk assessment scheme. A list of questions has been developed for the assessor to evaluate the consequences for structural biodiversity...

Spatial information in public consultation within environmental impact assessments

NARCIS (Netherlands)

Mwenda, A.N.

2015-01-01

Thesis Summary

Spatial information in public consultation within Environmental Impact Assessments

Angela N. Mwenda

Established in the United States of America in 1970, Environmental Impact Assessment (EIA) is an interdisciplinary approach that

Collaborative environmental assessment in the Northwest Territories, Canada

International Nuclear Information System (INIS)

Armitage, Derek R.

2005-01-01

Recent trends in environmental assessment theory and practice indicate a growing concern with collaboration and learning. Although there are few examples of the institutional, organizational, and socio-political forms and processes required to foster this collaboration and learning, the establishment of an environmental planning, management, and assessment regime in Canada's Northwest Territories offers useful insights. Consequently, this paper identifies and examines the institutional, organizational, and socio-political conditions that have encouraged more collaborative forms of environmental assessment practice in the Northwest Territories. Key issues highlighted include: (1) the development of decentralized regulatory organizations more responsive to changing circumstances; (2) strategies for more effective communication and participation of community interests; (3) efforts to build a collaborative vision of economic and social development through region-specific land use plans; (4) the integration of knowledge frameworks; and (5) a concern with the capacity required to encourage effective intervention in the assessment process

Environmental compliance assessment review

International Nuclear Information System (INIS)

Hilliday, G.H.

1991-01-01

During the period 1972-1991, The United States Congress passed stringent environmental statues which the Environment Protection Agency implemented via regulations. The statues and regulations contain severe civil and criminal penalties. Civil violations resulted in fines, typically payable by the company. The act of willfully and knowingly violating the permit conditions or regulations can result in criminal charges being imposed upon the responsible part, i.e., either the company or individual. Criminal charges can include fines, lawyer fees, court costs and incarceration. This paper describes steps necessary to form an effective Environmental Compliance Assessment Review [CAR] program, train field and engineering personnel and perform a CAR audit. Additionally, the paper discusses the findings of a number of Exploration and Production [E and P] field audits

Environmental assessment of freight transportation

Energy Technology Data Exchange (ETDEWEB)

Flodstroem, E. [MariTerm AB, Goeteborg (Sweden)

1998-04-01

This report is a short version in English of two reports in Swedish: KFB report 1994:6 `Environmental effects of change of transport mode for goods transportation` and `Combining of transport models` which was performed as a commission for the Swedish environmental protection agency. The aim of both studies is to investigate the environmental effects of political measures to transfer goods from one transport mode to another. To be able to calculate the environmental effects a method to follow the transport chains has been developed. By defining the transport chains with a main transport mode it has been possible to relate the emissions to the different modes. The main results are that the transferable volumes are limited and even if a maximum volume is transferred, the positive environmental effects are small compared to the effects of measures to reduce the emissions from the vehicles 3 refs, 22 figs, 34 tabs

Environmental assessment of different management options for individual waste fractions by means of life-cycle assessment modelling

DEFF Research Database (Denmark)

Manfredi, Simone; Tonini, Davide; Christensen, Thomas Højlund

2011-01-01

and environmental factors involved, including energy generation from landfill gas and storage of biogenic carbon. Leachate and gas emissions associated to each individual waste fraction have been estimated by means of a mathematical modelling. This approach towards landfilling emissions allows for a more precise...... quantification of the landfill impacts when comparing management options for selected waste fractions.Results from the life-cycle impact assessment (LCIA) show that the environmental performance estimated for landfilling with energy recovery of the fractions “organics” and “recyclable paper” is comparable...... with composting (for “organics”) and incineration (for “recyclable paper”). This however requires high degree of control over gas and leachate emissions, high gas collection efficiency and extensive gas utilization at the landfill. For the other waste fractions, recycling and incineration are favourable, although...

Environmental impact assessment Geopressure Subprogram

Energy Technology Data Exchange (ETDEWEB)

None

1977-07-01

This environmental impact assessment (EIA) addresses the expected programmatic activities of the Geopressure Subprogram of the Division of Geothermal Energy. The goal of the Geopressure Subprogram is to stimulate development of geopressured resources as an economic, reliable, operationally safe, and environmentally acceptable energy source. The subprogram includes activities in the areas of engineering research and development; resource exploration, assessment, and development; resource utilization including pilot and demonstration facilities; and environmental research and control technology development. It should be recognized that most of the subprogram activities extend over several years and are in their early stages of implementation at this time. The zones of potential geopressure development are in the region located along the Texas and Louisiana Gulf Coasts extending up to 200 miles (300 km) inland. Geopressured zones are sedimentary basins where water is trapped at high pressures within or below thick, nearly impermeable shale sequences. The confined water supports most or all of the weight of the overburden. This inhibits sediment compaction and causes formation pore pressure to exceed hydrostatic pressure. in sedimentary basins that are underlain by thin oceanic crust, upward thermal conduction from the mantle heats geopressured fluids and sediments to abnormally high temperatures, often in excess of 260 C (500 F).

ENVIRONMENTAL IMPACT ASSESSMENT OF A HEALTH TECHNOLOGY: A SCOPING REVIEW.

Science.gov (United States)

Polisena, Julie; De Angelis, Gino; Kaunelis, David; Gutierrez-Ibarluzea, Iñaki

2018-06-13

The Health Technology Expert Review Panel is an advisory body to Canadian Agency for Drugs and Technologies in Health (CADTH) that develops recommendations on health technology assessments (HTAs) for nondrug health technologies using a deliberative framework. The framework spans several domains, including the environmental impact of the health technology(ies). Our research objective was to identify articles on frameworks, methods or case studies on the environmental impact assessment of health technologies. A literature search in major databases and a focused gray literature search were conducted. The main search concepts were HTA and environmental impact/sustainability. Eligible articles were those that described a conceptual framework or methods used to conduct an environmental assessment of health technologies, and case studies on the application of an environmental assessment. From the 1,710 citations identified, thirteen publications were included. Two articles presented a framework to incorporate environmental assessment in HTAs. Other approaches described weight of evidence practices and comprehensive and integrated environmental impact assessments. Central themes derived include transparency and repeatability, integration of components in a framework or of evidence into a single outcome, data availability to ensure the accuracy of findings, and familiarity with the approach used. Each framework and methods presented have different foci related to the ecosystem, health economics, or engineering practices. Their descriptions suggested transparency, repeatability, and the integration of components or of evidence into a single outcome as their main strengths. Our review is an initial step of a larger initiative by CADTH to develop the methods and processes to address the environmental impact question in an HTA.

Metal bioavailability in ecological risk assessment of freshwater ecosystems: From science to environmental management.

Science.gov (United States)

Väänänen, Kristiina; Leppänen, Matti T; Chen, XuePing; Akkanen, Jarkko

2018-01-01

Metal contamination in freshwater ecosystems is a global issue and metal discharges to aquatic environments are monitored in order to protect aquatic life and human health. Bioavailability is an important factor determining metal toxicity. In aquatic systems, metal bioavailability depends on local water and sediment characteristics, and therefore, the risks are site-specific. Environmental quality standards (EQS) are used to manage the risks of metals in aquatic environments. In the simplest form of EQSs, total concentrations of metals in water or sediment are compared against pre-set acceptable threshold levels. Now, however, the environmental administration bodies have stated the need to incorporate metal bioavailability assessment tools into environmental regulation. Scientific advances have been made in metal bioavailability assessment, including passive samplers and computational models, such as biotic ligand models (BLM). However, the cutting-edge methods tend to be too elaborate or laborious for standard environmental monitoring. We review the commonly used metal bioavailability assessment methods and introduce the latest scientific advances that might be applied to environmental management in the future. We present the current practices in environmental management in North America, Europe and China, highlighting the good practices and the needs for improvement. Environmental management has met these new challenges with varying degrees of success: the USA has implemented site-specific environmental risk assessment for water and sediment phases, and they have already implemented metal mixture toxicity evaluation. The European Union is promoting the use of bioavailability and BLMs in ecological risk assessment (ERA), but metal mixture toxicity and sediment phase are still mostly neglected. China has regulation only for total concentrations of metals in surface water. We conclude that there is a need for (1) Advanced and up-to-date guidelines and legislation

Environmental Assessment. Moanalua Shopping Center Redevelopment Oahu, Hawaii

National Research Council Canada - National Science Library

Pingree, Ryan; Halperin, William

2004-01-01

The Department of the Navy has prepared an Environmental Assessment (EA) and determined that an Environmental Impact Statement is not required for the redevelopment of the Moanalua Shopping Center (MSC) Oahu Hawaii...

Environmental Assessment for decontamination and dismantlement, Pinellas Plant

International Nuclear Information System (INIS)

1995-06-01

The US Department of Energy (DOE) has prepared an Environmental Assessment (EA) (DOE/EA-1092) of the proposed decontamination and dismantlement of the Pinellas Plant in Largo, Florida. Under the Decontamination and Dismantlement EA, the DOE proposes to clean up facilities, structures, and utilities; dismantle specific structures; and mitigate or eliminate any environmental impacts associated with the cleanup, dismantlement, and related activities. Related activities include utilization of specific areas by new tenants prior to full-scale cleanup. Based on the analyses in the EA, the DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the National Environmental Policy Act of 1969. Therefore, the preparation of an environmental impact statement is not required. This report contains the Environmental Assessment, as well as the Finding of No Significant Impact (FONSI)

Participatory Risk Assessment for Environmental Decision-Making

International Nuclear Information System (INIS)

Homan, Jacqueline; Petts, Judith

2001-01-01

Recent research, discussion and practice in the role environmental decision-making as an integral part of a democratic society have resulted in legislation, policy and guidance that encourage, and indeed may require, greater participation. The focus of this research paper is to explore these participatory ideas in the context of environmental risk assessment. Participation methods have generic application. However, the importance of fitting method to purpose requires that different contexts and issues relative to the objectives be addressed. In relation to environmental risk assessment these issues include: the complexity of risk issues per se; the inherent uncertainty that dominates any risk assessment; the quantitative nature of many risk assessments and the difficulty of dealing with low probability-high consequence outconies; the possibility of controversy in relation to decisions involving risk and thus the careful attention needed to the process and identification of participants; the traditional role and culture of experts in risk decisions and the challenge of reconciling this with the role of lay knowledge and the potential for the public to act as quality assurers in the risk decision process; the tendency for people to need reassurance when confronted with risk, even during a participation process; the need to acknowledge the public's ability to deal with complex technical issues and the need for information and data to respond to their questions, and the fact that 'risk' per se will often not be the only issue of public concern. The contributions to the risk debate from the social sciences are having considerable influence on the practice of environmental decision-making. Calls for increased stakeholder involvement in risk decisions are requiring greater access to and engagement with environmental risk assessments. Mechanisms for this level of involvement, however, are not well defined. For these aspirational calls to be realised in practice, decision

Participatory Risk Assessment for Environmental Decision-Making

Energy Technology Data Exchange (ETDEWEB)

Homan, Jacqueline; Petts, Judith [Univ. of Birmingham (United Kingdom). Centre for Environmental Research and Training; Pollard, Simon; Twigger-Ross, Clare [National Centre for Risk Analysis and Options Appraisal, London (United Kingdom)

2001-07-01

Recent research, discussion and practice in the role environmental decision-making as an integral part of a democratic society have resulted in legislation, policy and guidance that encourage, and indeed may require, greater participation. The focus of this research paper is to explore these participatory ideas in the context of environmental risk assessment. Participation methods have generic application. However, the importance of fitting method to purpose requires that different contexts and issues relative to the objectives be addressed. In relation to environmental risk assessment these issues include: the complexity of risk issues per se; the inherent uncertainty that dominates any risk assessment; the quantitative nature of many risk assessments and the difficulty of dealing with low probability-high consequence outconies; the possibility of controversy in relation to decisions involving risk and thus the careful attention needed to the process and identification of participants; the traditional role and culture of experts in risk decisions and the challenge of reconciling this with the role of lay knowledge and the potential for the public to act as quality assurers in the risk decision process; the tendency for people to need reassurance when confronted with risk, even during a participation process; the need to acknowledge the public's ability to deal with complex technical issues and the need for information and data to respond to their questions, and the fact that 'risk' per se will often not be the only issue of public concern. The contributions to the risk debate from the social sciences are having considerable influence on the practice of environmental decision-making. Calls for increased stakeholder involvement in risk decisions are requiring greater access to and engagement with environmental risk assessments. Mechanisms for this level of involvement, however, are not well defined. For these aspirational calls to be realised in

An integrated risk assessment approach: Risk assessment in the programmatic environmental impact statement

International Nuclear Information System (INIS)

Morris, J.M.

1994-01-01

The following paper is an informal summary of salient points made in the presentation entitled open-quotes An Integrated Risk Assessment Approach: Risk Assessment in the Programmatic Environmental Impact Statement (PEIS).close quotes. This presentation was given at the U.S. DOE Integrated Planning Workshop in Denver, Colorado on June 2, 1994. Integrated decision analysis is very important in environmental restoration and waste management in the evaluation of such things as land use planning, waste load forecasting, cost analyses, and technology development activities. Integrated risk assessment is an approach that addresses multiple components of risk, including: risks from surplus facilities as well as typical environmental restoration sites, risks to the public, risks to workers, ecological risk, risks before, during and after remediation activities, and others

Environmental justice, impact assessment and the politics of knowledge: The implications of assessing the social distribution of environmental outcomes

International Nuclear Information System (INIS)

Walker, Gordon

2010-01-01

Claims of environmental injustice have increasingly become part of environmental conflicts, both explicitly through the work of environmental justice campaigning groups and implicitly through the arguments deployed about the rights and wrongs of a given situation. Such claims can centre on different notions of justice, including those concerned with questions of distribution and procedure. This paper focuses on distributional or outcome justice and explores what implications follow when the distributional concerns of environmental justice are included in the practice of impact assessment processes, including through social impact assessment (SIA). The current use of impact assessment methods in the UK is reviewed showing that although practices are evolving there is a little routine assessment of distributional inequalities. It is argued that whilst this should become part of established practice to ensure that inequalities are revealed and matters of justice are given a higher profile, the implications for conflict within decision making processes are not straightforward. On the one hand, there could be scope for conflict to be ameliorated by analysis of inequalities informing the debate between stakeholders, and facilitating the implementation of mitigation and compensation measures for disadvantaged groups. On the other hand, contestation over how evidence is produced and therefore what it shows, and disagreement as to the basis on which justice and injustice are to be determined, means that conflict may also be generated and sustained within what are essentially political and strategic settings.

The Environmental Assessment Technique: An Empirical Study.

Science.gov (United States)

Overall, Jesse U., IV

The purpose of the study was to investigate the effectiveness of Alexander Astin's Environmental Assessment Technique (EAT) in describing the environmental press at a large public university, California State University at Los Angeles. Results indicate that EAT is a very economical method for broadly describing aspects of a university's…

An Assessment of Environmental Impacts Assessment (EIA in Malaysia

Directory of Open Access Journals (Sweden)

Abdul Hamid Masdiah

2017-01-01

Full Text Available The effectiveness of Environmental Impact Assessment (EIA in evaluating the planning project is a debatable issue among academics and practitioners, since EIA has been claimed to be unable to eliminate the environmental issues. Focusing only on technical improvements is not sufficient for rectifying the problems of EIA; the process of EIA should be clearly identified instead to maximise the effective use of EIA. It is important to note that the effective use of EIA, particularly on process-related issues could significantly minimise bad environmental effects. In summary, this study aims to explore and identify the effectiveness of EIA in the planning process and barriers to evaluate the environmental performance in Malaysia. The findings of this study could be a baseline for organisation to minimize emission, avoid the risk of prosecution and fines arising from potential environment breaches and cost reduction within the organisation.

A new paradigm for Environmental Assessment (EA) in Korea

International Nuclear Information System (INIS)

Song, Young-Il; Glasson, John

2010-01-01

Over the last 30 years, Environmental Impact Assessment (EIA) in Korea has played an important role in decision-making processes particularly for environmentally sensitive projects. However, the EIA system alone has sometimes not been effective enough to ensure the successful resolution of environmental concerns. In order to compensate for the limitations of the EIA system, a new assessment system called Prior Environmental Review System (PERS), which is relevant to Strategic Environmental Assessment (SEA) in some aspects, was introduced in 1993. PERS aims to balance development and preservation by identifying possible environmental impacts of some administrative plans mainly related to development projects in the early stages of planning. However, PERS still appeared to have some weak points such as a limited range of subjects to be assessed, and weakness of tiering (or vertical integration) from PERS to EIA. Therefore, the necessity for reform of the Korean Environmental Assessment (EA) system, including PERS, was raised. In response, the Korean government sought to establish its policy direction for implementing SEA by enhancing the objectivity and expertise of PERS. The policy was approved by the National Assembly in May 2005, and went into effect in June 2006. The introduction of SEA, by enhancing PERS, provides a framework for a system of EA from the strategic level, including PPPs, to the project level. Yet, despite such improvements, some managerial and technical problems associated with subsequent EA implementation remain. This paper critically reviews the evolution of the EA system in Korea and suggests essential improvements for the current EA system based on experiences of implementation of both EIA and SEA since June 2006, in the context of international good practice.

A mathematical model for environmental risk assessment in manufacturing industry

Institute of Scientific and Technical Information of China (English)

何莉萍; 徐盛明; 陈大川; 党创寅

2002-01-01

Environmental conscious manufacturing has become an important issue in industry because of market pressure and environmental regulations. An environmental risk assessment model was developed based on the network analytic method and fuzzy set theory. The "interval analysis method" was applied to deal with the on-site monitoring data as basic information for assessment. In addition, the fuzzy set theory was employed to allow uncertain, interactive and dynamic information to be effectively incorporated into the environmental risk assessment. This model is a simple, practical and effective tool for evaluating the environmental risk of manufacturing industry and for analyzing the relative impacts of emission wastes, which are hazardous to both human and ecosystem health. Furthermore, the model is considered useful for design engineers and decision-maker to design and select processes when the costs, environmental impacts and performances of a product are taken into consideration.

A Concept for Multi-Criteria Environmental Assessment of Aircraft Trajectories

Directory of Open Access Journals (Sweden)

Sigrun Matthes

2017-08-01

Full Text Available Comprehensive assessment of the environmental aspects of flight movements is of increasing interest to the aviation sector as a potential input for developing sustainable aviation strategies that consider climate impact, air quality and noise issues simultaneously. However, comprehensive assessments of all three environmental aspects do not yet exist and are in particular not yet operational practice in flight planning. The purpose of this study is to present a methodology which allows to establish a multi-criteria environmental impact assessment directly in the flight planning process. The method expands a concept developed for climate optimisation of aircraft trajectories, by representing additionally air quality and noise impacts as additional criteria or dimensions, together with climate impact of aircraft trajectory. We present the mathematical framework for environmental assessment and optimisation of aircraft trajectories. In that context we present ideas on future implementation of such advanced meteorological services into air traffic management and trajectory planning by relying on environmental change functions (ECFs. These ECFs represent environmental impact due to changes in air quality, noise and climate impact. In a case study for Europe prototype ECFs are implemented and a performance assessment of aircraft trajectories is performed for a one-day traffic sample. For a single flight fuel-optimal versus climate-optimized trajectory solution is evaluated using prototypic ECFs and identifying mitigation potential. The ultimate goal of such a concept is to make available a comprehensive assessment framework for environmental performance of aircraft operations, by providing key performance indicators on climate impact, air quality and noise, as well as a tool for environmental optimisation of aircraft trajectories. This framework would allow studying and characterising changes in traffic flows due to environmental optimisation, as well

ENVIRONMENTAL AUDITING: AN INTEGRATED ENVIRONMENTAL ASSESSMENT OF THE U.S. MID-ATLANTIC REGION

Science.gov (United States)

Many of today's environmental problems are regional in scope and their effects overlap and interact. We developed a simple method to provide an integrated assessment of environmental conditions and estimate cumulative impacts across a large region, by combining data on land-cove...

Integrated manure management to reduce environmental impact: II. Environmental impact assessment of strategies

NARCIS (Netherlands)

Vries, de J.W.; Groenestein, C.M.; Schroder, J.J.; Hoogmoed, W.B.; Sukkel, W.; Groot Koerkamp, P.W.G.; Boer, de I.J.M.

2015-01-01

Manure management contributes to adverse environmental impacts through losses of nitrogen (N), phosphorus, and carbon (C). In this study, we aimed to assess the potential of newly designed strategies for integrated manure management (IS) to reduce environmental impact. An important aspect of the

A comparison between two full-scale MBR and CAS municipal wastewater treatment plants: techno-economic-environmental assessment.

Science.gov (United States)

Bertanza, Giorgio; Canato, Matteo; Laera, Giuseppe; Vaccari, Mentore; Svanström, Magdalena; Heimersson, Sara

2017-07-01

A holistic assessment procedure has been used in this study for comparing conventional activated sludge (CAS) and membrane bioreactor (MBR) processes for the treatment of municipal wastewater. Technical, social, administrative, economic and environmental impacts have been evaluated based on 1 year of operational data from three full-scale lines (one MBR and two CAS) working in parallel in a large municipal treatment plant. The comparative assessment evidences a slight advantage of the conventional process in the studied case, essentially due to lower costs, complexity and energy consumption. On the other hand, the MBR technology has a better social acceptance and similar overall environmental footprint. Although these results are influenced by site-specific parameters and cannot be generalized, the assessment procedure allowed identifying the most important factors affecting the final scores for each technology and the main differences between the compared technologies. Local conditions can affect the relative importance of the assessed impacts, and the use of weighting factors is proposed for better tailoring the comparative assessment to the local needs and circumstances. A sensitivity analysis on the weighted final scores demonstrated how local factors are very important and must be carefully evaluated in the decision making process.

Strategic Environmental Assessment and Sustainable Development

Science.gov (United States)

Tian, Mingjing; Gao, Qingjun; Wang, Nan; Yang, Xigen; Xu, Xin; Zhang, Lu

2018-04-01

The development of social science and technology economy, the international community more and more attention to environmental and development issues. So the main goal pursued by people is not only to meet the needs of social and natural resources, while at the same time being able to protect the needs of future generations. This is the path of sustainable development. Therefore, this paper is a detailed study of strategic environmental assessment and sustainable development.

Recovery in environmental risk assessment at EFSA

NARCIS (Netherlands)

Brock, T.C.M.

2016-01-01

EFSA performs environmental risk assessments (ERAs) for single potential stressors such as plant protection products, genetically modified organisms and feed additives and for invasive alien species that are harmful for plant health. In this risk assessment domain, the EFSA Scientific Committee

Geomorphological hazards and environmental impact: Assessment and mapping

Science.gov (United States)

Panizza, Mario

In five sections the author develops the methods for the integration of geomorphological concepts into Environmental Impact and Mapping. The first section introduces the concepts of Impact and Risk through the relationships between Geomorphological Environment and Anthropical Element. The second section proposes a methodology for the determination of Geomorphological Hazard and the identification of Geomorphological Risk. The third section synthesizes the procedure for the compilation of a Geomorphological Hazards Map. The fourth section outlines the concepts of Geomorphological Resource Assessment for the analysis of the Environmental Impact. The fifth section considers the contribution of geomorphological studies and mapping in the procedure for Environmental Impact Assessment.

Human exposure assessment to environmental chemicals using biomonitoring.

Science.gov (United States)

Calafat, Antonia M; Ye, Xiaoyun; Silva, Manori J; Kuklenyik, Zsuzsanna; Needham, Larry L

2006-02-01

In modern societies, humans may be exposed to a wide spectrum of environmental chemicals. Although the health significance of this exposure for many chemicals is unknown, studies to investigate the prevalence of exposure are warranted because of the chemicals' potential harmful health effects, as often indicated in animal studies. Three tools have been used to assess exposure: exposure history/questionnaire information, environmental monitoring, and biomonitoring (i.e. measuring concentrations of the chemicals, their metabolites, or their adducts in human specimens). We present an overview on the use of biomonitoring in exposure assessment using phthalates, bisphenol A and other environmental phenols, and perfluorinated chemicals as examples. We discuss some factors relevant for interpreting and understanding biomonitoring data, including selection of both biomarkers of exposure and human matrices, and toxicokinetic information. The use of biomonitoring in human risk assessment is not discussed.

Some anemonefish lack personality: a comparative assessment of behavioral variation and repeatability in relation to environmental and social factors

Science.gov (United States)

Wong, Marian Y. L.; Beasley, Amanda L.; Douglass, Tasman; Whalan, Steve; Scott, Anna

2017-12-01

Determining the extent of repeatable differences in the behavior of animals and the factors that influence behavioral expression is important for understanding individual fitness and population processes, thereby aiding in species conservation. However, little is known about the causes of variation in the repeatability of behavioral differences among species because rarely have comparative studies been undertaken to examine the repeatability of behavioral differences among individuals within their natural ecological settings. Using two species of endemic subtropical anemonefishes, Amphiprion mccullochi and A. latezonatus at Lord Howe and North Solitary Islands, Australia, we conducted an in situ comparative analysis of personality traits, examining the repeatability of boldness, sociability and aggression as well as the potential role of environmental and social factors on behavioral expression. For A. mccullochi, only boldness and aggression were highly repeatable and these behaviors formed a behavioral syndrome. For A. latezonatus, none of the three behaviors were repeatable due to low-inter-individual variation in behavior. We suggest that the harsher and more variable environmental and social conditions experienced by A. latezonatus have resulted in reduced repeatability in behavior, in contrast to A. mccullochi which typically inhabits a more stable lagoonal reef environment. Additionally, group size and size rank, rather than nearest-neighbor distance and anemone size, influenced the expression of these behaviors in both species, suggesting that behavioral variation was more sensitive to social than environmental factors. Overall, differences in repeatability between these closely related species likely reflect adaptations to contrasting environmental and social conditions, although alternative explanations must be considered. The differences in behavioral consistency between these two endemic anemonefishes could lead to disparity in their resilience to

Environmental integrated impact assessment for waste treatment activity: methodology and case-study application

International Nuclear Information System (INIS)

Lonati, G.; Panzeri, A.

2008-01-01

A literature method for the environmental integrated impact assessment, according to the IPPC Directive, has been critically analysed and adjusted in order to be used for the environmental performance assessment of waste treatment activities. The assessment parameters, sorted in eight treatment and combined pollution categories, have been partly redefined and re balanced. The adjusted methodology has been applied to a real case-study, a chemical- physical waste treatment plant, in order to calculate the current performance (Actual Integrated Index) and the ideal performance (Actual Integrated Index) achievable by technical and operational improvements. The adjusted methodology has also been used as a decision support system, in order to estimate the value of the expected environmental performances improvement after the execution achievable from the introduction of a single one or a set of improvement actions. The valuation of the Integrated Index percentage reduction, along with the action achievable, made the best actions able to be identified, both in comparative way and in the cost-effective one. The results, 50 as Effective Integrated Index and 42 as Ideal Integrated Index, in a 10-100 scale, show a medium impact level and point out an appreciable improvement margin on all the environmental performances, especially in air emission control and water consumption [it

A Framework for Comparative Assessments of Energy Efficiency Policy Measures

Energy Technology Data Exchange (ETDEWEB)

Blum, Helcio; Atkinson, Barbara; Lekov, Alex

2011-05-24

When policy makers propose new policies, there is a need to assess the costs and benefits of the proposed policy measures, to compare them to existing and alternative policies, and to rank them according to their effectiveness. In the case of equipment energy efficiency regulations, comparing the effects of a range of alternative policy measures requires evaluating their effects on consumers’ budgets, on national energy consumption and economics, and on the environment. Such an approach should be able to represent in a single framework the particularities of each policy measure and provide comparable results. This report presents an integrated methodological framework to assess prospectively the energy, economic, and environmental impacts of energy efficiency policy measures. The framework builds on the premise that the comparative assessment of energy efficiency policy measures should (a) rely on a common set of primary data and parameters, (b) follow a single functional approach to estimate the energy, economic, and emissions savings resulting from each assessed measure, and (c) present results through a set of comparable indicators. This framework elaborates on models that the U.S. Department of Energy (DOE) has used in support of its rulemakings on mandatory energy efficiency standards. In addition to a rigorous analysis of the impacts of mandatory standards, DOE compares the projected results of alternative policy measures to those projected to be achieved by the standards. The framework extends such an approach to provide a broad, generic methodology, with no geographic or sectoral limitations, that is useful for evaluating any type of equipment energy efficiency market intervention. The report concludes with a demonstration of how to use the framework to compare the impacts estimated for twelve policy measures focusing on increasing the energy efficiency of gas furnaces in the United States.

Ecological geology environmental assessment of open-pit mines

International Nuclear Information System (INIS)

Dong Shuangfa; Jiang Xue

2010-01-01

In this paper, there is a detail description of ecological geology environmental assessment of open-pit mines, including method, process and results. We took ecological geology environmental assessment work on the base of the results of some open-pit mines such as extremely low content magnetite in Hebei Province, inducted and summarized the ecological geology environment quality. The results are reasonable. It provides basic data for the second mines programming in Hebei Province. (authors)

Environmental Risk Assessment Strategy for Nanomaterials

Directory of Open Access Journals (Sweden)

Janeck J. Scott‐Fordsmand

2017-10-01

Full Text Available An Environmental Risk Assessment (ERA for nanomaterials (NMs is outlined in this paper. Contrary to other recent papers on the subject, the main data requirements, models and advancement within each of the four risk assessment domains are described, i.e., in the: (i materials, (ii release, fate and exposure, (iii hazard and (iv risk characterisation domains. The material, which is obviously the foundation for any risk assessment, should be described according to the legislatively required characterisation data. Characterisation data will also be used at various levels within the ERA, e.g., exposure modelling. The release, fate and exposure data and models cover the input for environmental distribution models in order to identify the potential (PES and relevant exposure scenarios (RES and, subsequently, the possible release routes, both with regard to which compartment(s NMs are distributed in line with the factors determining the fate within environmental compartment. The initial outcome in the risk characterisation will be a generic Predicted Environmental Concentration (PEC, but a refined PEC can be obtained by applying specific exposure models for relevant media. The hazard information covers a variety of representative, relevant and reliable organisms and/or functions, relevant for the RES and enabling a hazard characterisation. The initial outcome will be hazard characterisation in test systems allowing estimating a Predicted No-Effect concentration (PNEC, either based on uncertainty factors or on a NM adapted version of the Species Sensitivity Distributions approach. The risk characterisation will either be based on a deterministic risk ratio approach (i.e., PEC/PNEC or an overlay of probability distributions, i.e., exposure and hazard distributions, using the nano relevant models.

Environmental Risk Assessment Strategy for Nanomaterials.

Science.gov (United States)

Scott-Fordsmand, Janeck J; Peijnenburg, Willie J G M; Semenzin, Elena; Nowack, Bernd; Hunt, Neil; Hristozov, Danail; Marcomini, Antonio; Irfan, Muhammad-Adeel; Jiménez, Araceli Sánchez; Landsiedel, Robert; Tran, Lang; Oomen, Agnes G; Bos, Peter M J; Hund-Rinke, Kerstin

2017-10-19

An Environmental Risk Assessment (ERA) for nanomaterials (NMs) is outlined in this paper. Contrary to other recent papers on the subject, the main data requirements, models and advancement within each of the four risk assessment domains are described, i.e., in the: (i) materials, (ii) release, fate and exposure, (iii) hazard and (iv) risk characterisation domains. The material, which is obviously the foundation for any risk assessment, should be described according to the legislatively required characterisation data. Characterisation data will also be used at various levels within the ERA, e.g., exposure modelling. The release, fate and exposure data and models cover the input for environmental distribution models in order to identify the potential (PES) and relevant exposure scenarios (RES) and, subsequently, the possible release routes, both with regard to which compartment(s) NMs are distributed in line with the factors determining the fate within environmental compartment. The initial outcome in the risk characterisation will be a generic Predicted Environmental Concentration (PEC), but a refined PEC can be obtained by applying specific exposure models for relevant media. The hazard information covers a variety of representative, relevant and reliable organisms and/or functions, relevant for the RES and enabling a hazard characterisation. The initial outcome will be hazard characterisation in test systems allowing estimating a Predicted No-Effect concentration (PNEC), either based on uncertainty factors or on a NM adapted version of the Species Sensitivity Distributions approach. The risk characterisation will either be based on a deterministic risk ratio approach (i.e., PEC/PNEC) or an overlay of probability distributions, i.e., exposure and hazard distributions, using the nano relevant models.

Environmental assessment, Pinellas Plant site, Petersburg, Florida

International Nuclear Information System (INIS)

1983-07-01

The purpose of this environmental assessment is to describe the operations at the Pinellas Plant, discuss the locale in which the plant is situated and assess the actual and possible impacts of plant operation on the surrounding environment. The facility and the local environment are described; impacts on the economy, local community and the environment discussed, and alternatives presented. A comparison of the environmental impact of operating the Pinellas Plant versus the benefits gained by its operation suggests that the plant should continue its function of supplying nuclear weapons components for the US Department of Energy

Characteristics of environmental gamma-rays and dose assessment

International Nuclear Information System (INIS)

Saito, Kimiaki; Moriuchi, Shigeru

1986-01-01

Environmental radioactivity has attracted much attention in terms of exposure to the population, although its exposure doses are minimal. This paper presents problems encountered in the assessment of exposure doses using model and monitoring systems, focusing on the characteristics, such as energy distribution, direction distribution, and site, of environmental gamma-rays. The assessment of outdoor and indoor exposure doses of natural gamma-rays is discussed in relation to the shielding effect of the human body. In the assessment of artificial gamma-rays, calculation of exposure doses using build-up factor, the shielding effect of the human body, and energy dependency of the measuring instrument are covered. A continuing elucidation about uncertainties in dose assessment is emphasized. (Namekawa, K.)

Environmental impact assessment of nuclear desalination

International Nuclear Information System (INIS)

2010-03-01

Nuclear desalination is gaining interest among the IAEA Member States, as indicated by the planned projects, and it is expected that the number of nuclear desalination plants will increase in the near future. The IAEA has already provided its Member States with reports and documents that disseminate information regarding the technical and economic feasibility of nuclear desalination. With the rising environmental awareness, in the scope of IAEA's activities on seawater desalination using nuclear power, a need was identified for a report that would provide a generic assessment of the environmental issues in nuclear desalination. In order to offer an overview of specific environmental impacts which are to be expected, their probable magnitude, and recommended mitigation measures, this publication encompasses information provided by the IAEA Member States as well as other specialized sources. It is intended for decision makers and experts dealing with environmental, desalination and water management issues, offering insight into the environmental aspects that are essential in planning and developing nuclear desalination

[Ecological environmental quality assessment of Hangzhou urban area based on RS and GIS].

Science.gov (United States)

Xu, Pengwei; Zhao, Duo

2006-06-01

In allusion to the shortage of traditional ecological environmental quality assessment, this paper studied the spatial distribution of assessing factors at a mid-small scale, and the conversion of integer character to girding assessing cells. The main assessing factors including natural environmental condition, environmental quality, natural landscape and urbanization pressure, which were classified into four types with about eleven assessing factors, were selected from RS images and GIS-spatial analyzing environmental quality vector graph. Based on GIS, a comprehensive assessment model for the ecological environmental quality in Hangzhou urban area was established. In comparison with observed urban heat island effects, the assessment results were in good agreement with the ecological environmental quality in the urban area of Hangzhou.

Environmental Methods Review: Retooling Impact Assessment for the New Century

Science.gov (United States)

1998-03-01

Environmental Assessment Research Council. Netherlands, Commission for Environmental Impact Assessment. 1993. Year book of the Commission for Environmental...professional standards. Currently. the main avenues to obtain information in order to maintain or improve competence include: • journals. books ...World Wide Web • professional associations and networks such as IAIA. All of these. however. rely on using the expertise of others secondhand . Who

Environmental assessment: Industry perspective

International Nuclear Information System (INIS)

Meadley, T.

1994-01-01

The Canadian mining industry supports the concept of environmental assessment, but the current process at the time of the conference had a number of problems that the industry felt should be addressed. The author makes the following suggestions: that the process for individual projects should be separated from policy issues; that panel members should be drawn from a full-time staff; that there should be better referral criteria to determine which projects require full scale assessment including public hearings; that either the government or project opponents should participate but not both; that the financial burden on proponents should be reduced; that funding of intervenors should be controlled; that there should be a definite time frame

An investigation of environmental and sustainability discourses associated with the substantive purposes of environmental assessment

Energy Technology Data Exchange (ETDEWEB)

Rozema, Jaap G., E-mail: j.rozema@uea.ac.uk [Science, Society and Sustainability Research Group, School of Environmental Sciences, University of East Anglia (UEA), Norwich, NR4 7TJ (United Kingdom); Bond, Alan J., E-mail: alan.bond@uea.ac.uk [Science, Society and Sustainability Research Group, School of Environmental Sciences, University of East Anglia (UEA), Norwich, NR4 7TJ (United Kingdom); Cashmore, Matthew, E-mail: cashmore@plan.aau.dk [Danish Centre for Environmental Assessment, Department of Development and Planning, Aalborg University, Fibigerstraede 13, 9220 Aalborg O (Denmark); Chilvers, Jason, E-mail: jason.chilvers@uea.ac.uk [Science, Society and Sustainability Research Group, School of Environmental Sciences, University of East Anglia (UEA), Norwich, NR4 7TJ (United Kingdom)

2012-02-15

This paper investigates the discursive construction of the substantive purposes of environmental assessment (EA). It addresses these purposes by exploring the complex and often multifaceted linkages between political factors and plural views of democracy, public participation, and the role of science that are embedded in environmental and sustainability discourses. The interaction between policy-making and public actors leads to the formulation of divergent and potentially competing rationales for public participation, and for social appraisal more generally. Participatory approaches have also given impetus to the development of several interpretations on the role of science in assessment procedures. Science is important in mediating public participation and the two are therefore reciprocally linked. This leads to discourses that become manifest in the construction of substantive purposes. Discourse analysis in EA is a relevant method for examining trends and patterns in sustainable development. It is argued that public participation is an important, if not decisive, variable in the articulation and civil legitimacy of certain purposes. A general proposition that results from this paper is that EA, although typically presented as an objective scientific tool, is an intrinsically normative process. Enhanced knowledge on the construction, and reconstruction over time, of substantive purposes is required if environmental and sustainability discourses are to be used and understood as meaningful analytical instruments to assess the socio-political implications of EA. - Highlights: Black-Right-Pointing-Pointer Substantive purposes related to environmental assessment may be best analyzed through discourse analysis. Black-Right-Pointing-Pointer Environmental and sustainability discourses are contingent on the level of participatory democracy and civic science. Black-Right-Pointing-Pointer Public participation is a decisive variable in the construction of the substantive

An investigation of environmental and sustainability discourses associated with the substantive purposes of environmental assessment

International Nuclear Information System (INIS)

Rozema, Jaap G.; Bond, Alan J.; Cashmore, Matthew; Chilvers, Jason

2012-01-01

This paper investigates the discursive construction of the substantive purposes of environmental assessment (EA). It addresses these purposes by exploring the complex and often multifaceted linkages between political factors and plural views of democracy, public participation, and the role of science that are embedded in environmental and sustainability discourses. The interaction between policy-making and public actors leads to the formulation of divergent and potentially competing rationales for public participation, and for social appraisal more generally. Participatory approaches have also given impetus to the development of several interpretations on the role of science in assessment procedures. Science is important in mediating public participation and the two are therefore reciprocally linked. This leads to discourses that become manifest in the construction of substantive purposes. Discourse analysis in EA is a relevant method for examining trends and patterns in sustainable development. It is argued that public participation is an important, if not decisive, variable in the articulation and civil legitimacy of certain purposes. A general proposition that results from this paper is that EA, although typically presented as an objective scientific tool, is an intrinsically normative process. Enhanced knowledge on the construction, and reconstruction over time, of substantive purposes is required if environmental and sustainability discourses are to be used and understood as meaningful analytical instruments to assess the socio-political implications of EA. - Highlights: ► Substantive purposes related to environmental assessment may be best analyzed through discourse analysis. ► Environmental and sustainability discourses are contingent on the level of participatory democracy and civic science. ► Public participation is a decisive variable in the construction of the substantive purpose of environmental assessment.

Graphical Methodology of Global Pollution Index for the Environmental Impact Assessment Using Two Environmental Components

Directory of Open Access Journals (Sweden)

Corneliu Cojocaru

2017-04-01

Full Text Available One of the applied methods for environmental impact assessment is the index of global pollution (IGP proposed by Rojanschi in 1991. This methodology enables the global estimation for the ecosystem state affected more or less by human activities. Unfortunately, Rojanschi’s method has a limitation; it can be applied only if at least three environmental components are considered. Frequently, many environmental impact assessment applications rely on analysis of only two environmental components. Therefore, this work aimed to develop a new graphical method to extend Rojanschi’s approach for the case of two environmental components. The proposed method avoids the average value of evaluation grades and uses only the graphical correspondence for calculation of the index of global pollution. A right-angle triangle graph methodology was proposed, where bases represented the values of evaluation grades. Thus, for the case of two environmental components, the index of global pollution was calculated as the relation between the ideal and real ecosystem states represented by the ratio between areas of external and enclosed right triangles. The developed graphical method was tested and validated for real case studies: the environmental impact assessment from a refinery located on the Romanian Black Sea Coast considering Air and Water environmental components and from a coal-fired thermoelectric power plant from Eastern Romania regarding Air and Soil environmental components. In this way, it was provided a reliable and faster tool to be used for the pollution characterization of human-derived chemicals for better decisions in risk management.

Environmental impact assessment: use of literature data versus use of specific local and regional data

International Nuclear Information System (INIS)

Rochedo, Elaine R.R.; Wasserman, Maria Angelica

2000-01-01

The environmental radiological impact assessment methodology includes a large number of parameters to simulate the environmental transfer and population exposure. Local and regional data are often not available, particularly for tropical regions, which leads to the use of literature data, mostly determined at temperate climate countries. Since 1993, IRD has been developing radioecological studies aiming the determination soil-plant transfer factors, which showed the possibility of finding values up to one order of magnitude higher than those found at temperate climate countries literature. This paper compares dose results for several scenarios, using regional and literature data, assessing the relevance of using site specific data for radiological impact assessments, for both practices and intervention situations. (author)

Environmental risk assessment in GMO analysis.

Science.gov (United States)

Pirondini, Andrea; Marmiroli, Nelson

2010-01-01

Genetically modified or engineered organisms (GMOs, GEOs) are utilised in agriculture, expressing traits of interest, such as insect or herbicide resistance. Soybean, maize, cotton and oilseed rape are the GM crops with the largest acreage in the world. The distribution of GM acreage in the different countries is related with the different positions concerning labelling of GMO products: based on the principle of substantial equivalence, or rather based on the precautionary principle. The paper provides an overview on how the risks associated with release of GMO in the environments can be analysed and predicted, in view of a possible coexistence of GM and non-GM organisms in agriculture.Risk assessment procedures, both qualitative and quantitative, are compared in the context of application to GMOs considering also legislation requirements (Directive 2001/18/EC). Criteria and measurable properties to assess harm for human health and environmental safety are listed, and the possible consequences are evaluated in terms of significance.Finally, a mapping of the possible risks deriving from GMO release is reported, focusing on gene transfer to related species, horizontal gene transfer, direct and indirect effects on non target organisms, development of resistance in target organisms, and effects on biodiversity.

Model of environmental life cycle assessment for coal mining operations.

Science.gov (United States)

Burchart-Korol, Dorota; Fugiel, Agata; Czaplicka-Kolarz, Krystyna; Turek, Marian

2016-08-15

This paper presents a novel approach to environmental assessment of coal mining operations, which enables assessment of the factors that are both directly and indirectly affecting the environment and are associated with the production of raw materials and energy used in processes. The primary novelty of the paper is the development of a computational environmental life cycle assessment (LCA) model for coal mining operations and the application of the model for coal mining operations in Poland. The LCA model enables the assessment of environmental indicators for all identified unit processes in hard coal mines with the life cycle approach. The proposed model enables the assessment of greenhouse gas emissions (GHGs) based on the IPCC method and the assessment of damage categories, such as human health, ecosystems and resources based on the ReCiPe method. The model enables the assessment of GHGs for hard coal mining operations in three time frames: 20, 100 and 500years. The model was used to evaluate the coal mines in Poland. It was demonstrated that the largest environmental impacts in damage categories were associated with the use of fossil fuels, methane emissions and the use of electricity, processing of wastes, heat, and steel supports. It was concluded that an environmental assessment of coal mining operations, apart from direct influence from processing waste, methane emissions and drainage water, should include the use of electricity, heat and steel, particularly for steel supports. Because the model allows the comparison of environmental impact assessment for various unit processes, it can be used for all hard coal mines, not only in Poland but also in the world. This development is an important step forward in the study of the impacts of fossil fuels on the environment with the potential to mitigate the impact of the coal industry on the environment. Copyright © 2016 Elsevier B.V. All rights reserved.

Assessing the environmental performance of construction materials testing using EMS: An Australian study.

Science.gov (United States)

Dejkovski, Nick

2016-10-01

This paper reports the audit findings of the waste management practices at 30 construction materials testing (CMT) laboratories (constituting 4.6% of total accredited CMT laboratories at the time of the audit) that operate in four Australian jurisdictions and assesses the organisation's Environmental Management System (EMS) for indicators of progress towards sustainable development (SD). In Australia, waste indicators are 'priority indicators' of environmental performance yet the quality and availability of waste data is poor. National construction and demolition waste (CDW) data estimates are not fully disaggregated and the contribution of CMT waste (classified as CDW) to the national total CDW landfill burden is difficult to quantify. The environmental and human impacts of anthropogenic release of hazardous substances contained in CMT waste into the ecosphere can be measured by construing waste indicators from the EMS. An analytical framework for evaluating the EMS is developed to elucidate CMT waste indicators and assess these indicators against the principle of proportionality. Assessing against this principle allows for: objective evaluations of whether the environmental measures prescribed in the EMS are 'proportionate' to the 'desired' (subjective) level of protection chosen by decision-makers; and benchmarking CMT waste indicators against aspirational CDW targets set by each Australian jurisdiction included in the audit. Construed together, the EMS derived waste indicators and benchmark data provide a composite indicator of environmental performance and progress towards SD. The key audit findings indicate: CMT laboratories have a 'poor' environmental performance (and overall progress towards SD) when EMS waste data are converted into indicator scores and assessed against the principle of proportionality; CMT waste recycling targets are lower when benchmarked against jurisdictional CDW waste recovery targets; and no significant difference in the average

Determining Vulnerability Importance in Environmental Impact Assessment

International Nuclear Information System (INIS)

Toro, Javier; Duarte, Oscar; Requena, Ignacio; Zamorano, Montserrat

2012-01-01

The concept of vulnerability has been used to describe the susceptibility of physical, biotic, and social systems to harm or hazard. In this sense, it is a tool that reduces the uncertainties of Environmental Impact Assessment (EIA) since it does not depend exclusively on the value assessments of the evaluator, but rather is based on the environmental state indicators of the site where the projects or activities are being carried out. The concept of vulnerability thus reduces the possibility that evaluators will subjectively interpret results, and be influenced by outside interests and pressures during projects. However, up until now, EIA has been hindered by a lack of effective methods. This research study analyzes the concept of vulnerability, defines Vulnerability Importance and proposes its inclusion in qualitative EIA methodology. The method used to quantify Vulnerability Importance is based on a set of environmental factors and indicators that provide a comprehensive overview of the environmental state. The results obtained in Colombia highlight the usefulness and objectivity of this method since there is a direct relation between this value and the environmental state of the departments analyzed. - Research Highlights: ► The concept of vulnerability could be considered defining Vulnerability Importance included in qualitative EIA methodology. ► The use of the concept of environmental vulnerability could reduce the subjectivity of qualitative methods of EIA. ► A method to quantify the Vulnerability Importance proposed provides a comprehensive overview of the environmental state. ► Results in Colombia highlight the usefulness and objectivity of this method.

Assessing the wider environmental value of remediating land contamination

NARCIS (Netherlands)

Bardos, R.P.; Kearney, T.E.; Nathanail, C.P.; Weenk, A.; Martin, I.D.

2000-01-01

The aim of this paper is to consider qualitative and quantitative approaches for assessing the wider environmental value of remediating land contamination. In terms of the environmental element of sustainable development, a remediation project's overall environmental performance is the sum of the

Proposing an Environmental Excellence Self-Assessment Model

DEFF Research Database (Denmark)

Meulengracht Jensen, Peter; Johansen, John; Wæhrens, Brian Vejrum

2013-01-01

that the EEA model can be used in global organizations to differentiate environmental efforts depending on the maturity stage of the individual sites. Furthermore, the model can be used to support the decision-making process regarding when organizations should embark on more complex environmental efforts......This paper presents an Environmental Excellence Self-Assessment (EEA) model based on the structure of the European Foundation of Quality Management Business Excellence Framework. Four theoretical scenarios for deploying the model are presented as well as managerial implications, suggesting...

Use of comparative genomics approaches to characterize interspecies differences in response to environmental chemicals: Challenges, opportunities, and research needs

International Nuclear Information System (INIS)

Burgess-Herbert, Sarah L.; Euling, Susan Y.

2013-01-01

A critical challenge for environmental chemical risk assessment is the characterization and reduction of uncertainties introduced when extrapolating inferences from one species to another. The purpose of this article is to explore the challenges, opportunities, and research needs surrounding the issue of how genomics data and computational and systems level approaches can be applied to inform differences in response to environmental chemical exposure across species. We propose that the data, tools, and evolutionary framework of comparative genomics be adapted to inform interspecies differences in chemical mechanisms of action. We compare and contrast existing approaches, from disciplines as varied as evolutionary biology, systems biology, mathematics, and computer science, that can be used, modified, and combined in new ways to discover and characterize interspecies differences in chemical mechanism of action which, in turn, can be explored for application to risk assessment. We consider how genetic, protein, pathway, and network information can be interrogated from an evolutionary biology perspective to effectively characterize variations in biological processes of toxicological relevance among organisms. We conclude that comparative genomics approaches show promise for characterizing interspecies differences in mechanisms of action, and further, for improving our understanding of the uncertainties inherent in extrapolating inferences across species in both ecological and human health risk assessment. To achieve long-term relevance and consistent use in environmental chemical risk assessment, improved bioinformatics tools, computational methods robust to data gaps, and quantitative approaches for conducting extrapolations across species are critically needed. Specific areas ripe for research to address these needs are recommended

Risk and environmental impact assessment: nuclear and environmental licensing interface

International Nuclear Information System (INIS)

Costa, Eduardo M.; Monteiro, Iara A.

1997-01-01

The main aims of this paper are the identification and discussion of interfaces and application of common concepts in the existing nuclear and environmental licensing procedures. Risk and impact assessment of nuclear electricity generation are two of these concepts which are discussed detail. The risk concept, which had initially focused on engineering projects, has been extended to many other areas of human activity. Risk resulting from the use of ionization radiation has been associated to the dose for the critical members of the public. Therefore, radiation protection applies basic dose limits which are established in national and international recommendations. These recommendations are increasing the emphasis to keep all the exposures to ionizing radiation as low as reasonable achievable, economical and social factors being taken into account. On the other hand, environmental impact assessment has been used as a tool in planning and decision-making processes, thus including environmental concern in the discussion of social and economical development strategies. This paper aims to discuss the association of these two concepts by presenting the procedures of control of radiological impact during normal operation of a nuclear power plant and the various forms of risk communication to the public in the case of events occurrence. (author). 13 refs

Citizen involvement in sustainability-centred environmental assessment follow-up

International Nuclear Information System (INIS)

Hunsberger, Carol A.; Gibson, Robert B.; Wismer, Susan K.

2005-01-01

In Canada, many project proponents and planners in the public and private sectors are required to forecast and minimize the adverse environmental effects of their undertakings. However, environmental assessments have traditionally been weak in the areas of planning and conducting effective monitoring, encouraging public participation, integrating social and ecological considerations, encouraging environmental rehabilitation and enhancement, and examining cumulative effects of multiple projects. This paper attempts to address these deficiencies together by drawing from theory and practice in citizen-based monitoring, in the interests of sustainable livelihoods, using local knowledge. Informed by case study research in several regions of Canada, the discussion focuses on opportunities for using citizen-based approaches to broad and continuing regional monitoring as a foundation for the project-centred work that is the usual concern of environmental assessment follow-up. Such approaches have advantages beyond the usual expectations of project-centred monitoring and beyond the conventional arguments for increasing local involvement in environmental assessments. However, there are also challenges including those of integrating local and conventional (or scientific) knowledge systems, addressing concerns about the credibility and biases of citizens and project proponents, ensuring attention to broader sustainability goals such as increased stewardship and civility, and developing practical ways of coordinating and funding integrated and participatory monitoring programs. The concluding recommendations call for a dramatically different approach to follow-up activities on the part of private and public project proponents, as well as novel thinking for environmental assessment practitioners

The mediation of environmental assessment's influence: What role for power?

Energy Technology Data Exchange (ETDEWEB)

Cashmore, Matthew, E-mail: cashmore@plan.aau.dk [Danish Centre for Environmental Assessment, Department of Development and Planning, Aalborg University Copenhagen, A.C. Meyers Vaenge 15, DK-2450 Copenhagen SV (Denmark); Axelsson, Anna [Naturskyddsforeningen, Box 4625, 116 91 Stockholm (Sweden)

2013-02-15

Considerable empirical research has been conducted on why policy tools such as environmental assessment (EA) often appear to have 'little effect' (after Weiss) on policy decisions. This article revisits this debate but looks at a mediating factor that has received limited attention to-date in the context of EA - political power. Using a tripartite analytical framework, a comparative analysis of the influence and significance of power in mediating environmental policy integration is undertaken. Power is analysed, albeit partially, through an exploration of institutions that underpin social order. Empirically, the research examines the case of a new approach to policy-level EA (essentially a form of Strategic Environmental Assessment) developed by the World Bank and its trial application to urban environmental governance and planning in Dhaka mega-city, Bangladesh. The research results demonstrate that power was intimately involved in mediating the influence of the policy EA approach, in both positive (enabling) and negative (constraining) ways. It is suggested that the policy EA approach was ultimately a manifestation of a corporate strategy to maintain the powerful position of the World Bank as a leading authority on international development which focuses on knowledge generation. Furthermore, as constitutive of an institution and reflecting the worldviews of its proponents, the development of a new approach to EA also represents a significant power play. This leads us to, firstly, emphasise the concepts of strategy and intentionality in theorising how and why EA tools are employed, succeed and fail; and secondly, reflect on the reasons why power has received such limited attention to-date in EA scholarship. - Highlights: Black-Right-Pointing-Pointer Conducts empirical research on the neglected issue of power. Black-Right-Pointing-Pointer Employs an interpretation of power in which it is viewed as a productive phenomenon. Black

Scoping and public participation in the environmental impact assessment: Finnish experiences

International Nuclear Information System (INIS)

Leskinen, A.

2002-01-01

Environmental Impact Assessment (EIA) is a process that produces information for decision making. Therefore it can be described as planning. It is also a systematic way to compare alternative options. One major lesson learned during the early years of EIA was that everything cannot and should not be assessed. The first reports of the assessments in the US were massive documents that were of very limited use in decision making. Therefore the scoping-phase was adopted. The aim of scoping is to focus on important issues at the beginning of the EIA-process. I try to shed some light to the importance of the scoping or programming phase of the process. (author)

Comparative environmental evaluation of construction waste management through different waste sorting systems in Hong Kong.

Science.gov (United States)

Hossain, Md Uzzal; Wu, Zezhou; Poon, Chi Sun

2017-11-01

This study aimed to compare the environmental performance of building construction waste management (CWM) systems in Hong Kong. Life cycle assessment (LCA) approach was applied to evaluate the performance of CWM systems holistically based on primary data collected from two real building construction sites and secondary data obtained from the literature. Different waste recovery rates were applied based on compositions and material flow to assess the influence on the environmental performance of CWM systems. The system boundary includes all stages of the life cycle of building construction waste (including transportation, sorting, public fill or landfill disposal, recovery and reuse, and transformation and valorization into secondary products). A substitutional LCA approach was applied for capturing the environmental gains due to the utilizations of recovered materials. The results showed that the CWM system by using off-site sorting and direct landfilling resulted in significant environmental impacts. However, a considerable net environmental benefit was observed through an on-site sorting system. For example, about 18-30kg CO 2 eq. greenhouse gases (GHGs) emission were induced for managing 1 t of construction waste through off-site sorting and direct landfilling, whereas significant GHGs emission could be potentially avoided (considered as a credit -126 to -182kg CO 2 eq.) for an on-site sorting system due to the higher recycling potential. Although the environmental benefits mainly depend on the waste compositions and their sortability, the analysis conducted in this study can serve as guidelines to design an effective and resource-efficient building CWM system. Copyright © 2017 Elsevier Ltd. All rights reserved.

Environmental impact assessment of different design schemes of an industrial ecosystem

International Nuclear Information System (INIS)

Singh, Aditi; Lou, Helen H.; Yaws, Carl L.; Hopper, Jack R.; Pike, Ralph W.

2007-01-01

Industrial ecosystem is an important approach for sustainable development. In an industrial ecosystem, a group of industries are inter-connected through mass and energy exchanges for mutual benefits. However, some mass and energy exchange activities may cause unexpected environmental impacts. Therefore, it is vital to evaluate the environmental impacts of the symbiosis in order to provide a clear guidance for the decision-makers and stakeholders. The agro-chemical complex in the Lower Mississippi River Corridor with thirteen chemical and petrochemical industries emits huge amount of carbon dioxide. A bi-level design methodology is used to reconfigure this complex for utilizing surplus carbon dioxide. By using a superstructure-based approach, a new design scheme for this industrial ecosystem is proposed. In this paper, an LCA-type environmental impact assessment of different design schemes for this complex is conducted using the software TRACI, a tool developed by the United States Environmental Protection Agency (USEPA). This analysis compares various environmental impacts of different designs and identifies the potential trade-offs in different environmental impact categories. This information provides deep insight about the environmental sustainability of industrial ecosystems and facilitates the development of the most eco-effective symbiosis for recycle, reuse and resource conservation. (author)

Comparative life cycle assessment of pistachio, almond and apple production

Directory of Open Access Journals (Sweden)

G. Bartzas

2017-09-01

Full Text Available A comparative life cycle assessment (LCA, with the use of GaBi 6 software and specific related databases, of three water intensive tree cultivation systems was conducted in order to evaluate environmental impacts and energy consumption. The tree crops are traditionally cultivated in two representative areas in Greece, namely Aegina island, Attica region, for pistachios and Agia, East Thessaly region, central Greece, for apples and almonds. The impact categories considered include global warming potential (GWP, eutrophication potential (EP, acidification potential (AP and cumulative energy demand (CED. Based upon the results obtained, it is deduced that pistachios and almonds show minor differences for all impact categories considered, while apples exhibit the best environmental profile. The phases of fertilizers production, irrigation system and field management were identified as the main “hot-spots” for all crops, exhibiting the highest environmental impacts and energy consumption. A sensitivity analysis was performed to explore actions that can be considered at farm scale, such as water desalination for irrigation purposes, transition to organic production and use of renewable energy, in order to reduce water requirements and promote energy conservation, especially in semi-arid and arid Mediterranean regions which suffer from water shortage and are prone to salinization. Finally, the results of this study were compared with the results derived from other relevant LCA studies.

Draft environmental assessment: Ocean Thermal Energy Conversion (OTEC) Pilot Plants

Energy Technology Data Exchange (ETDEWEB)

Sullivan, S.M.; Sands, M.D.; Donat, J.R.; Jepsen, P.; Smookler, M.; Villa, J.F.

1981-02-01

This Environmental Assessment (EA) has been prepared, in accordance with the National Environmental Policy Act of 1969, for the deployment and operation of a commercial 40-Megawatt (MW) Ocean Thermal Energy Conversion (OTEC) Pilot Plant (hereafter called the Pilot Plant). A description of the proposed action is presented, and a generic environment typical of the candidate Pilot Plant siting regions is described. An assessment of the potential environmental impacts associated with the proposed action is given, and the risk of credible accidents and mitigating measures to reduce these risks are considered. The Federal and State plans and policies the proposed action will encompass are described. Alternatives to the proposed action are presented. Appendix A presents the navigation and environmental information contained in the US Coast Pilot for each of the candidate sites; Appendix B provides a brief description of the methods and calculations used in the EA. It is concluded that environmental disturbances associated with Pilot Plant activities could potentially cause significant environmental impacts; however, the magnitude of these potential impacts cannot presently be assessed, due to insufficient engineering and environmental information. A site- and design-specific OTEC Pilot Plant Environmental Impact Statement (EIS) is required to resolve the potentially significant environmental effects associated with Pilot Plant deployment and operation. (WHK)

Systematic comparative and sensitivity analyses of additive and outranking techniques for supporting impact significance assessments

International Nuclear Information System (INIS)

Cloquell-Ballester, Vicente-Agustin; Monterde-Diaz, Rafael; Cloquell-Ballester, Victor-Andres; Santamarina-Siurana, Maria-Cristina

2007-01-01

Assessing the significance of environmental impacts is one of the most important and all together difficult processes of Environmental Impact Assessment. This is largely due to the multicriteria nature of the problem. To date, decision techniques used in the process suffer from two drawbacks, namely the problem of compensation and the problem of identification of the 'exact boundary' between sub-ranges. This article discusses these issues and proposes a methodology for determining the significance of environmental impacts based on comparative and sensitivity analyses using the Electre TRI technique. An application of the methodology for the environmental assessment of a Power Plant project within the Valencian Region (Spain) is presented, and its performance evaluated. It is concluded that contrary to other techniques, Electre TRI automatically identifies those cases where allocation of significance categories is most difficult and, when combined with sensitivity analysis, offers greatest robustness in the face of variation in weights of the significance attributes. Likewise, this research demonstrates the efficacy of systematic comparison between Electre TRI and sum-based techniques, in the solution of assignment problems. The proposed methodology can therefore be regarded as a successful aid to the decision-maker, who will ultimately take the final decision

Modern biogeochemistry environmental risk assessment

CERN Document Server

Bashkin, Vladimir N

2006-01-01

Most books deal mainly with various technical aspects of ERA description and calculationsAims at generalizing the modern ideas of both biogeochemical and environmental risk assessment during recent yearsAims at supplementing the existing books by providing a modern understanding of mechanisms that are responsible for the ecological risk for human beings and ecosystem

Environmental impact assessment around TRIGA research reactor

International Nuclear Information System (INIS)

Lee, Jeong Ho; Lee, Hyun Duk; Lee, Young Bok; Cheong, Kyu Hoi; Ahn, Jong Sung; Kim, Kug Chan; You, Byung Sun; Kim, Byung Woo; Kim, Sang Bok; Han Moon Hee

1985-01-01

Population distribution, atmospheric change, X/Q, characteristics of terrestrial ecosystem around Seoul site were surveyed. Environmental radiation and radioactivities such as grossα, grossβ, Cs-137, Sr-90 and H-3 of various environmental samples were analyzed. The values of environmental radiation dose tended to increase gradually in the light of the recent five years' results of environmental radiation monitoring around the nuclear power plants from 1980 to 1984, however, the changes were not significant. In addition, continuous assessment of environmental radiation monitoring on the roofs of main building and life science building at KAERI showed that the environmental radiation dose tended to increase a little during the night time. Judging from the above results, it is concluded that environmental contamination level by radioactive materials could be ignored in the case of radioisotope production or experiment using radioisotopes except the release of gaseous radioactive materials such as Ar-41 of short half life by the operation of nuclear reactor. (Author)

Environmental risk assessment for plant pests: a procedure to evaluate their impacts on ecosystem services.

Science.gov (United States)

Gilioli, G; Schrader, G; Baker, R H A; Ceglarska, E; Kertész, V K; Lövei, G; Navajas, M; Rossi, V; Tramontini, S; van Lenteren, J C

2014-01-15

The current methods to assess the environmental impacts of plant pests differ in their approaches and there is a lack of the standardized procedures necessary to provide accurate and consistent results, demonstrating the complexity of developing a commonly accepted scheme for this purpose. By including both the structural and functional components of the environment threatened by invasive alien species (IAS), in particular plant pests, we propose an environmental risk assessment scheme that addresses this complexity. Structural components are investigated by evaluating the impacts of the plant pest on genetic, species and landscape diversity. Functional components are evaluated by estimating how plant pests modify ecosystem services in order to determine the extent to which an IAS changes the functional traits that influence ecosystem services. A scenario study at a defined spatial and temporal resolution is then used to explore how an IAS, as an exogenous driving force, may trigger modifications in the target environment. The method presented here provides a standardized approach to generate comparable and reproducible results for environmental risk assessment as a component of Pest Risk Analysis. The method enables the assessment of overall environmental risk which integrates the impacts on different components of the environment and their probabilities of occurrence. The application of the proposed scheme is illustrated by evaluating the environmental impacts of the invasive citrus long-horn beetle, Anoplophora chinensis. © 2013.

Assessing environmental impacts in a life cycle perspective

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky

2005-01-01

is focused on the product system which comprises all the processes which the product and its components meet throughout their lives- from the extraction of raw materials via manufacture, use and waste management to final disposal, or in short from the cradle to the grave (see Figure 1). The focus......What are the environmental impacts from an armchairor a cellular phone or a steak, if you take into account all the activities needed to produce, maintain, use or consume and eventually dispose of it? Life cycle impact assessment is the part of life cycle assessment (LCA) where the inventory...... of material flows in the life cycle of a product are translated into environmental impacts and consumption of resources, and questions like these are given an answer. The environmental impacts may range from very local (e.g. land use) to global (like climate change). As an environmental analysis tool, LCA...

Environmental site assessments should include radon gas testing

International Nuclear Information System (INIS)

Nardi, M.A.

1991-01-01

There are two emerging influences that will require radon gas testing as part of many property transfers and most site assessments. These requirements come from lending regulators and state legislatures. Fannie Mae and others have developed environmental investigation guidelines for the purchase of environmentally contaminated real estate. These guidelines include radon gas testing for many properties. Several states have enacted laws that require environmental disclosure forms be prepared to ensure that the parties involved in certain real estate transactions are aware of the environmental liabilities that may come with the transfer of property. Indiana has recently enacted legislation that would require the disclosure of the presence of radon gas on many commercial real estate transactions. With more lenders and state governments likely to follow this trend, radon gas testing should be performed during all property transfers and site assessment to protect the parties involved from any legal liabilities

Radiation environmental impact assessment of the radioisotope's application on nuclear medical science

International Nuclear Information System (INIS)

Liu Hongshi

2004-01-01

The radiation environmental impact assessment of the radioisotope's application on nuclear medical science is introduced, including the assessment criteria, the assessment methods and the environmental impact assessment of three wastes emission. (authors)

The screening and scoping of Environmental Impact Assessment and Strategic Environmental Assessment of Carbon Capture and Storage in the Netherlands

International Nuclear Information System (INIS)

Koornneef, Joris; Faaij, Andre; Turkenburg, Wim

2008-01-01

The Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are procedural tools which have as goal to assess and evaluate possible environmental effects of, respectively, a proposed project or policy plan. The goal of this article is to explore possible bottlenecks in applying both the EIA and SEA procedures on Carbon Capture and Storage (CCS) activities in the Netherlands, as experience is currently minimal or lacking. In this study we focus mainly on the institutional and procedural aspects of the screening and scoping phases of both procedures. This is achieved by reviewing EIA and SEA procedures for analogue projects for the three distinctive process steps of a CCS project, namely the power plant with capture, the transport and finally the underground storage of the CO 2 . Additionally, EIA and SEA or similar procedures on CCS in other countries are reviewed and the legal framework for the Dutch EIA and SEA is studied. This article shows a concise overview of the EIA and SEA procedure in the Netherlands and the relation between both procedures. Based on our findings we have constructed a conceptual taxonomy for the scope of both procedures for CCS in the Netherlands. This taxonomy conceptualizes the possible integration of assessing the environmental impacts for tiered levels of decision making. This integration might be needed for first CCS projects as decisions on the strategic (spatial planning) level are currently absent for CCS in the Netherlands. Perpendicular to such integration is the integration of linked activities in the CCS chain and their alternatives, into one procedure. We argue that it would be beneficial to combine the separate EIA procedures for CCS activities into one procedure or at least provide close linkage between them. This issue should be carefully considered by regulators, competent authorities and project initiators in an early stage to avoid delaying legal procedures in the future. For the same reason

Internal cycle modeling and environmental assessment of multiple cycle consumer products

International Nuclear Information System (INIS)

Tsiliyannis, C.A.

2012-01-01

Highlights: ► Dynamic flow models are presented for remanufactured, reused or recycled products. ► Early loss and stochastic return are included for fast and slow cycling products. ► The reuse-to-input flow ratio (Internal Cycle Factor, ICF) is determined. ► The cycle rate, which is increasing with the ICF, monitors eco-performance. ► Early internal cycle losses diminish the ICF, the cycle rate and performance. - Abstract: Dynamic annual flow models incorporating consumer discard and usage loss and featuring deterministic and stochastic end-of-cycle (EOC) return by the consumer are developed for reused or remanufactured products (multiple cycle products, MCPs), including fast and slow cycling, short and long-lived products. It is shown that internal flows (reuse and overall consumption) increase proportionally to the dimensionless internal cycle factor (ICF) which is related to environmental impact reduction factors. The combined reuse/recycle (or cycle) rate is shown capable for shortcut, albeit effective, monitoring of environmental performance in terms of waste production, virgin material extraction and manufacturing impacts of all MCPs, a task, which physical variables (lifetime, cycling frequency, mean or total number of return trips) and conventional rates, via which environmental policy has been officially implemented (e.g. recycling rate) cannot accomplish. The cycle rate is shown to be an increasing (hyperbolic) function of ICF. The impact of the stochastic EOC return characteristics on total reuse and consumption flows, as well as on eco-performance, is assessed: symmetric EOC return has a small, positive effect on performance compared to deterministic, while early shifted EOC return is more beneficial. In order to be efficient, environmental policy should set higher minimum reuse targets for higher trippage MCPs. The results may serve for monitoring, flow accounting and comparative eco-assessment of MCPs. They may be useful in identifying

Using Art to Assess Environmental Education Outcomes

Science.gov (United States)

Flowers, Ami A.; Carroll, John P.; Green, Gary T.; Larson, Lincoln R.

2015-01-01

Construction of developmentally appropriate tools for assessing the environmental attitudes and awareness of young learners has proven to be challenging. Art-based assessments that encourage creativity and accommodate different modes of expression may be a particularly useful complement to conventional tools (e.g. surveys), but their efficacy and…

Critical factors in environmental impact assessment

International Nuclear Information System (INIS)

Creasey, R.

1999-01-01

Environmental impact assessment (EIA) has shown that it is of proven benefit to the overall planning and environmental management of resource development projects, but certain elements within the application and practice of EIA remain problematic for proponents and regulatory decision makers alike. The use of the word 'critical' in the title of this paper suggests that if the components identified are not considered or implemented properly through the process of EIA, the product will be of less value to both the proponent and decision maker. In the context of EIA, the regulatory, financial, legal and social benefits that accrue make the need for good EIA practice even more imperative. A discussion is included that highlights a number of issues that need to be addressed to improve the effectiveness of EIA, a tool necessary to attaining provincial and federal regulatory approvals. To a large extent, the discussion reflects items of contemporary public concern, and those emerging issues of the scientific and regulatory community. At the same time, it needs to be realized that not all the identified items are necessarily new to the practice of impact assessment, but are nonetheless important to professional environmental impact assessment and decision making. Insight is also provided into the direction of decision making of the Energy and Utilities Board as it will affect the regulatory review and administration of resource development projects in the province of Alberta. 16 refs

The Contribution of Project Environmental Assessment to Assessing and Managing Cumulative Effects: Individually and Collectively Insignificant?

Science.gov (United States)

Noble, Bram; Liu, Jialang; Hackett, Paul

2017-04-01

This paper explores the opportunities and constraints to project-based environmental assessment as a means to support the assessment and management of cumulative environmental effects. A case study of the hydroelectric sector is used to determine whether sufficient information is available over time through project-by-project assessments to support an adequate understanding of cumulative change. Results show inconsistency from one project to the next in terms of the components and indicators assessed, limited transfer of baseline information between project assessments over time, and the same issues and concerns being raised by review panels-even though the projects reviewed are operating in the same watershed and operated by the same proponent. Project environmental assessments must be managed, and coordinated, as part of a larger system of impact assessment, if project-by-project assessments are to provide a meaningful forum for learning and understanding cumulative change. The paper concludes with recommendations for improved project-based assessment practice in support of cumulative effects assessment and management.

Formerly Utilized Sites Remedial Action Program environmental compliance assessment checklists

Energy Technology Data Exchange (ETDEWEB)

Levine, M.B.; Sigmon, C.F.

1989-09-29

The purpose of the Environmental Compliance Assessment Program is to assess the compliance of Formerly Utilized Site Remedial Action Program (FUSRAP) sites with applicable environmental regulations and Department of Energy (DOE) Orders. The mission is to identify, assess, and decontaminate sites utilized during the 1940s, 1950s, and 1960s to process and store uranium and thorium ores in support of the Manhattan Engineer District and the Atomic Energy Commission. To conduct the FUSRAP environmental compliance assessment, checklists were developed that outline audit procedures to determine the compliance status of the site. The checklists are divided in four groups to correspond to these regulatory areas: Hazardous Waste Management, PCB Management, Air Emissions, and Water Discharges.

Formerly Utilized Sites Remedial Action Program environmental compliance assessment checklists

International Nuclear Information System (INIS)

Levine, M.B.; Sigmon, C.F.

1989-01-01

The purpose of the Environmental Compliance Assessment Program is to assess the compliance of Formerly Utilized Site Remedial Action Program (FUSRAP) sites with applicable environmental regulations and Department of Energy (DOE) Orders. The mission is to identify, assess, and decontaminate sites utilized during the 1940s, 1950s, and 1960s to process and store uranium and thorium ores in support of the Manhattan Engineer District and the Atomic Energy Commission. To conduct the FUSRAP environmental compliance assessment, checklists were developed that outline audit procedures to determine the compliance status of the site. The checklists are divided in four groups to correspond to these regulatory areas: Hazardous Waste Management, PCB Management, Air Emissions, and Water Discharges

Environmental Monitoring and Assessment Program (EMAP) National Coastal Database

Data.gov (United States)

U.S. Environmental Protection Agency — The Environmental Monitoring and Assessment Program (EMAP) National Coastal Database contains estuarine and coastal data that EMAP and Regional-EMAP have collected...

Radiological assessment. A textbook on environmental dose analysis

Energy Technology Data Exchange (ETDEWEB)

Till, J.E.; Meyer, H.R. (eds.)

1983-09-01

Radiological assessment is the quantitative process of estimating the consequences to humans resulting from the release of radionuclides to the biosphere. It is a multidisciplinary subject requiring the expertise of a number of individuals in order to predict source terms, describe environmental transport, calculate internal and external dose, and extrapolate dose to health effects. Up to this time there has been available no comprehensive book describing, on a uniform and comprehensive level, the techniques and models used in radiological assessment. Radiological Assessment is based on material presented at the 1980 Health Physics Society Summer School held in Seattle, Washington. The material has been expanded and edited to make it comprehensive in scope and useful as a text. Topics covered include (1) source terms for nuclear facilities and Medical and Industrial sites; (2) transport of radionuclides in the atmosphere; (3) transport of radionuclides in surface waters; (4) transport of radionuclides in groundwater; (5) terrestrial and aquatic food chain pathways; (6) reference man; a system for internal dose calculations; (7) internal dosimetry; (8) external dosimetry; (9) models for special-case radionuclides; (10) calculation of health effects in irradiated populations; (11) evaluation of uncertainties in environmental radiological assessment models; (12) regulatory standards for environmental releases of radionuclides; (13) development of computer codes for radiological assessment; and (14) assessment of accidental releases of radionuclides.

Radiological assessment. A textbook on environmental dose analysis

International Nuclear Information System (INIS)

Till, J.E.; Meyer, H.R.

1983-09-01

Radiological assessment is the quantitative process of estimating the consequences to humans resulting from the release of radionuclides to the biosphere. It is a multidisciplinary subject requiring the expertise of a number of individuals in order to predict source terms, describe environmental transport, calculate internal and external dose, and extrapolate dose to health effects. Up to this time there has been available no comprehensive book describing, on a uniform and comprehensive level, the techniques and models used in radiological assessment. Radiological Assessment is based on material presented at the 1980 Health Physics Society Summer School held in Seattle, Washington. The material has been expanded and edited to make it comprehensive in scope and useful as a text. Topics covered include (1) source terms for nuclear facilities and Medical and Industrial sites; (2) transport of radionuclides in the atmosphere; (3) transport of radionuclides in surface waters; (4) transport of radionuclides in groundwater; (5) terrestrial and aquatic food chain pathways; (6) reference man; a system for internal dose calculations; (7) internal dosimetry; (8) external dosimetry; (9) models for special-case radionuclides; (10) calculation of health effects in irradiated populations; (11) evaluation of uncertainties in environmental radiological assessment models; (12) regulatory standards for environmental releases of radionuclides; (13) development of computer codes for radiological assessment; and (14) assessment of accidental releases of radionuclides

Environmental impact assessment based on planning support system

NARCIS (Netherlands)

Carsjens, G.J.; Chen, W.

2011-01-01

How to assess environmental impact is one of the keys in land use planning. This article described in detail the concepts of activities, impact zones, functions, and sensitivities, as well as the development of STEPP (strategic tool for integrating environmental aspects in planning procedures) based

Comparative Assessment of Severe Accidents in the Chinese Energy Sector

Energy Technology Data Exchange (ETDEWEB)

Hirschberg, S; Burgherr, P; Spiekerman, G; Cazzoli, E; Vitazek, J; Cheng, L

2003-03-01

This report deals with the comparative assessment of accidents risks characteristic for the various electricity supply options. A reasonably complete picture of the wide spectrum of health, environmental and economic effects associated with various energy systems can only be obtained by considering damages due to normal operation as well as due to accidents. The focus of the present work is on severe accidents, as these are considered controversial. By severe accidents we understand potential or actual accidents that represent a significant risk to people, property and the environment and may lead to large consequences. (author)

Environmental assessment of Swedish agriculture

International Nuclear Information System (INIS)

Engstroem, Rebecka; Finnveden, Goeran; Wadeskog, Anders

2007-01-01

This article describes an environmental assessment of Swedish agriculture, including upstream and downstream effects. The analysis is based on environmentally extended input-output analysis, but it is also supplemented with data from other sources. The analysis shows that direct effects by the Swedish agriculture are the most important, while indirect effects from other sources including mobile and impacts abroad are also considerable. The most important impacts from Swedish agriculture according to the analysis are eutrophication, global warming and resource use. The agricultural sector produces a large share of the Swedish emissions causing both global warming and eutrophication. In addition, current agricultural practice causes problems with loss of biodiversity. The most important actors in the sector are agriculture itself, but also all actors using fossil fuels: primarily the transport sector and the energy sector. In addition, consumers are important since they can influence the composition of agricultural production. The analysis shows the importance of including upstream and downstream effects when analysing the environmental impacts from a sector. (author)

Comparative life cycle assessment of wastewater treatment in Denmark including sensitivity and uncertainty analysis

DEFF Research Database (Denmark)

Niero, Monia; Pizzol, Massimo; Gundorph Bruun, Henrik

2014-01-01

Wastewater treatment has nowadays multiple functions and produces both clean effluents and sludge, which is increasingly seen as a resource rather than a waste product. Technological as well as management choices influence the performance of wastewater treatment plants (WWTPs) on the multiple...... functions. In this context, Life Cycle Assessment (LCA) can determine what choices provide the best environmental performance. However, the assessment is not straightforward due to the intrinsic space and time-related variability of the wastewater treatment process. These challenges were addressed...... in a comparative LCA of four types of WWTPs, representative of mainstream treatment options in Denmark. The four plant types differ regarding size and treatment technology: aerobic versus anaerobic, chemical vs. combined chemical and biological. Trade-offs in their environmental performance were identified...

A Comparative Assessment of Life-Cycle Greenhouse Gas Emissions from Hypothetical Electric Airport Transportation Services in Thailand

Science.gov (United States)

Koiwanit, J.

2018-05-01

Global warming is an increase of average temperature in the atmosphere, which causes adverse effects on the environment. Carbon dioxide (CO2) from transportation sector is one of the main contributors of the overall greenhouse gases (GHG). To cope with this issue, electric car services are increasingly seen as popular alternative modes of green transportation especially for urban cities as it is more flexible, more environmentally-friendly, and less expensive than the use of conventional vehicles. The study analyses and compare the hypothetical electric car systems from airport transportation services. Center of Environmental Science of Leiden University (CML) 2001, the Life Cycle Impact Assessment (LCIA) method, is applied to convert life cycle inventory data into environmental impacts. The observed results showed that the electric shuttle bus had the highest impact in global warming potential (GWP) compared to other transportation types. Alternatively, this Life Cycle Assessment (LCA) study that evaluated different transportations provided important information for decision makers on quantifying the differences between each scenario.

Regional restrictions on environmental impact assessment approval in China: the legitimacy of environmental authoritarianism

NARCIS (Netherlands)

Zhu, X.; Zhang, L.; Ran, R.; Mol, A.P.J.

2015-01-01

The poor enforcement and effectiveness of environmental impact assessment (EIA) on construction and investment projects in China has long been blamed for not preventing environmental pollution and degradation. At the same time, freezing EIA approval of all new projects in an administrative region,

Alternatives and implication in process of environmental impact assessment

Directory of Open Access Journals (Sweden)

Tauš Peter

2001-12-01

Full Text Available EIA is an interactive, rule-based expert system for the environmental impact assessment. It is designed for a screening level assessment of development projects at a pre-feasibility stage. Typical problems for the evaluation include: resettlement; watershed degradation; encroachment upon precious ecosystems; encroachment on historical/cultural values; watershed erosion; reservoir siltation; impairment of navigation; changes in groundwater hydrology, waterlogging; seepage and evaporation losses; migration of valuable fish species; inundation of mineral resources/forests; other inundation losses and adverse effects. It is important to prevent environmental pollution when carrying out large-scale development projects, such as artificial change of landscapes and building of certain structures that may cause a tremendous impact on the environment. In accordance with Cities Environmental Impact Assessment Departments it is necessary to provide project organisers with a necessary advice and instructions concerning the environmental impact assessment a survey to predict and evaluate environmental impact to be conducted by project organisers. Prior to offering the advice and instructions, cities need to hear the opinions of residents of the areas concerned, mayors of related municipalities and other opinion leaders, including specialists, to reflect their views in the environmental preservation. The first aspect in any quality assessment is to determine the representativeness of data both in terms of physical siting and data collected. It must be recognised the environment is a dynamic fluid; quality therefore varies over space and time. There will be locations in any community that experience poorer quality than recorded at a monitoring station. Likewise other sites will have a better quality. Most communities have only a single monitoring site. Therefore, the air quality monitors are sited to provide a representative estimate of the community exposure

[Status Quo, Uncertainties and Trends Analysis of Environmental Risk Assessment for PFASs].

Science.gov (United States)

Hao, Xue-wen; Li, Li; Wang, Jie; Cao, Yan; Liu, Jian-guo

2015-08-01

This study systematically combed the definition and change of terms, category and application of perfluoroalkyl and polyfluoroalkyl substances (PFASs) in international academic, focusing on the environmental risk and exposure assessment of PFASs, to comprehensively analyze the current status, uncertainties and trends of PFASs' environmental risk assessment. Overall, the risk assessment of PFASs is facing a complicated situation involving complex substance pedigrees, various types, complex derivative relations, confidential business information and risk uncertainties. Although the environmental risk of long-chain PFASs has been widely recognized, the short-chain PFASs and short-chain fluorotelomers as their alternatives still have many research gaps and uncertainties in environmental hazards, environmental fate and exposure risk. The scope of risk control of PFASs in the international community is still worth discussing. Due to trade secrets and market competition, the chemical structure and risk information of PFASs' alternatives are generally lack of openness and transparency. The environmental risk of most fluorinated and non-fluorinated alternatives is not clear. In total, the international research on PFASs risk assessment gradually transfer from long-chain perfluoroalkyl acids (PFAAs) represented by perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) to short-chain PFAAs, and then extends to other PFASs. The main problems to be solved urgently and researched continuously are: the environmental hazardous assessment indexes, such as bioaccumulation and environmental migration, optimization method, the environmental release and multimedia environmental fate of short-chain PFASs; the environmental fate of neutral PFASs and the transformation and contribution as precursors of short-chain PFASs; the risk identification and assessment of fluorinated and non-fluorinated alternatives of PFASs.

Carbon Footprint in Flexible Ureteroscopy: A Comparative Study on the Environmental Impact of Reusable and Single-Use Ureteroscopes.

Science.gov (United States)

Davis, Niall F; McGrath, Shannon; Quinlan, Mark; Jack, Gregory; Lawrentschuk, Nathan; Bolton, Damien M

2018-03-01

There are no comparative assessments on the environmental impact of endourologic instruments. We evaluated and compared the environmental impact of single-use flexible ureteroscopes with reusable flexible ureteroscopes. An analysis of the typical life cycle of the LithoVue™ (Boston Scientific) single-use digital flexible ureteroscope and Olympus Flexible Video Ureteroscope (URV-F) was performed. To measure the carbon footprint, data were obtained on manufacturing of single-use and reusable flexible ureteroscopes and from typical uses obtained with a reusable scope, including repairs, replacement instruments, and ultimate disposal of both ureteroscopes. The solid waste generated (kg) and energy consumed (kWh) during each case were quantified and converted into their equivalent mass of carbon dioxide (kg of CO 2 ) released. Flexible ureteroscopic raw materials composed of plastic (90%), steel (4%), electronics (4%), and rubber (2%). The manufacturing cost of a flexible ureteroscope was 11.49 kg of CO 2 per 1 kg of ureteroscope. The weight of the single-use LithoVue and URV-F flexible ureteroscope was 0.3 and 1 kg, respectively. The total carbon footprint of the lifecycle assessment of the LithoVue was 4.43 kg of CO 2 per endourologic case. The total carbon footprint of the lifecycle of the reusable ureteroscope was 4.47 kg of CO 2 per case. The environmental impacts of the reusable flexible ureteroscope and the single-use flexible ureteroscope are comparable. Urologists should be aware that the typical life cycle of urologic instruments is a concerning source of environmental emissions.

Variability of building environmental assessment tools on evaluating carbon emissions

Energy Technology Data Exchange (ETDEWEB)

Ng, S. Thomas, E-mail: tstng@hkucc.hku.hk; Chen Yuan, E-mail: chenyuan4@gmail.com; Wong, James M.W., E-mail: jmwwong@hku.hk

2013-01-15

With an increasing importance of sustainability in construction, more and more clients and designers employ building environmental assessment (BEA) tools to evaluate the environmental friendliness of their building facilities, and one important aspect of evaluation in the BEA models is the assessment of carbon emissions. However, in the absence of any agreed framework for carbon auditing and benchmarking, the results generated by the BEA tools might vary significantly which could lead to confusion or misinterpretation on the carbon performance of a building. This study thus aims to unveil the properties of and the standard imposed by the current BEA models on evaluating the life cycle carbon emissions. The analyses cover the (i) weighting of energy efficiency and emission levels among various environmental performance indicators; (ii) building life cycle stages in which carbon is taken into consideration; (iii) objectiveness of assessment; (iv) baseline set for carbon assessment; (v) mechanism for benchmarking the emission level; and (v) limitations of the carbon assessment approaches. Results indicate that the current BEA schemes focus primarily on operational carbon instead of the emissions generated throughout the entire building life cycle. Besides, the baseline and benchmark for carbon evaluation vary significantly among the BEA tools based on the analytical results of a hypothetical building. The findings point to the needs for a more transparent framework for carbon auditing and benchmarking in BEA modeling. - Highlights: Black-Right-Pointing-Pointer Carbon emission evaluation in building environmental assessment schemes are studied. Black-Right-Pointing-Pointer Simulative carbon emission is modeled for building environmental assessment schemes. Black-Right-Pointing-Pointer Carbon assessments focus primarily on operational stage instead of entire lifecycle. Black-Right-Pointing-Pointer Baseline and benchmark of carbon assessment vary greatly among BEA

Variability of building environmental assessment tools on evaluating carbon emissions

International Nuclear Information System (INIS)

Ng, S. Thomas; Chen Yuan; Wong, James M.W.

2013-01-01

With an increasing importance of sustainability in construction, more and more clients and designers employ building environmental assessment (BEA) tools to evaluate the environmental friendliness of their building facilities, and one important aspect of evaluation in the BEA models is the assessment of carbon emissions. However, in the absence of any agreed framework for carbon auditing and benchmarking, the results generated by the BEA tools might vary significantly which could lead to confusion or misinterpretation on the carbon performance of a building. This study thus aims to unveil the properties of and the standard imposed by the current BEA models on evaluating the life cycle carbon emissions. The analyses cover the (i) weighting of energy efficiency and emission levels among various environmental performance indicators; (ii) building life cycle stages in which carbon is taken into consideration; (iii) objectiveness of assessment; (iv) baseline set for carbon assessment; (v) mechanism for benchmarking the emission level; and (v) limitations of the carbon assessment approaches. Results indicate that the current BEA schemes focus primarily on operational carbon instead of the emissions generated throughout the entire building life cycle. Besides, the baseline and benchmark for carbon evaluation vary significantly among the BEA tools based on the analytical results of a hypothetical building. The findings point to the needs for a more transparent framework for carbon auditing and benchmarking in BEA modeling. - Highlights: ► Carbon emission evaluation in building environmental assessment schemes are studied. ► Simulative carbon emission is modeled for building environmental assessment schemes. ► Carbon assessments focus primarily on operational stage instead of entire lifecycle. ► Baseline and benchmark of carbon assessment vary greatly among BEA schemes. ► A more transparent and comprehensive framework for carbon assessment is required.

Environmental and life cycle assessment of the Finnish Forest Research Institute's (Metla) research centre in Joensuu

International Nuclear Information System (INIS)

Haekkinen, T.; Wirtanen, L.

2006-05-01

The publication presents the results from the environmental assessment of Metla office building. The assessment was done according to the principles introduced in the so called EKA-methodology. The publication analyses the influence of the use of wood on the environmental impacts on building level paying attention to the use of resources and release of carbon dioxide emissions. Wooden structures were compared to corresponding concrete structures. The alternative structures were comparable in terms of structural capacity and thermal performance (U-values). The study covered the structural parts of the building while other building parts were excluded. The exclusion was justified because the choice of structural components did not essentially affect the quality and quantity of other products. The study focused on the production and procurement of building products and the building. The study did not consider the effects of assembling, in-situ construction, care and maintenance and demolition on the material flows and relative environmental impacts. The study only dealt with the physical building and did not consider the environmental impacts from the use of the building. On the basis of the results the environmental impacts caused by the wooden structures of the Metla office building are significantly smaller than those of the corresponding concrete structures. For example the assessed total release of CO 2 emissions for the wooden building is 320 000 kg, while the corresponding value for the concrete building is 800 000 kg CO 2 . The result can be explained on the basis of the low weight of the wooden structures compared to the weight of corresponding concrete structures. The total weight of the structural parts (building skeleton and envelope) of the Metla building is roughly 2000 tons while the total weight of the corresponding concrete structures is nearly 5000 tons. (orig.)

Environmental Impacts of Future Urban Deployment of Electric Vehicles: Assessment Framework and Case Study of Copenhagen for 2016-2030.

Science.gov (United States)

Bohnes, Florence A; Gregg, Jay S; Laurent, Alexis

2017-12-05

To move toward environmentally sustainable transport systems, electric vehicles (EVs) are increasingly seen as viable alternatives to internal combustion vehicles (ICVs). To ensure effectiveness of such deployment, holistic assessments of environmental impacts can help decision-makers determine optimized urban strategies in a long-term perspective. However, explicit guidance and conduct of such assessments are currently missing. Here, we therefore propose a framework using life cycle assessment that enables the quantification of environmental impacts of a transport system at full urban scale from a fleet-based, foresight perspective. The analysis of the passenger car fleet development in the city of Copenhagen for the years 2016-2030 is used as a proof-of-concept. We modeled and compared five powertrain technologies, and we assessed four fleet-based scenarios for the entire city. Our results showed relative environmental benefits from range-extended and fuel-cell EVs over ICVs and standard EVs. These results were found to be sensitive to local settings, like electricity grid mix, which could alter the relative environmental performances across EV technologies. The comprehensive framework developed here can be applied to other geographic areas and contexts to assess the environmental sustainability of transport systems.