Project W-320 ALARA Plan

International Nuclear Information System (INIS)

Harty, W.M.

1995-01-01

This supporting document establishes the As Low As Reasonable Achievable (ALARA) Plan to be followed during Sluicing Project W-320 design and construction activities to minimize personnel exposure to radiation and hazardous materials

Project W-320 ALARA Plan

Energy Technology Data Exchange (ETDEWEB)

Harty, W.M.

1995-06-06

This supporting document establishes the As Low As Reasonable Achievable (ALARA) Plan to be followed during Sluicing Project W-320 design and construction activities to minimize personnel exposure to radiation and hazardous materials.

Nozzle evaluation for Project W-314

International Nuclear Information System (INIS)

Galbraith, J.D.

1998-01-01

Revisions to the waste transfer system piping to be implemented by Project W-314 will eliminate the need to access a majority of interfarm jumper connections associated with specific process pits. Additionally, connections that formerly facilitated waste transfers from the Plutonium-Uranium Extraction (PUREX) Plant are no longer required. This document identified unneeded process pit jumper connections, describes former designated routing, denotes current status (i.e., open or blanked), and recommends appropriate disposition for all. Blanking of identified nozzles should be accomplished by Project W-314 upon installation of jumpers and acceptance by Tank Waste Remediation System (TWRS) Tank Farm Operations

MetaComp: comprehensive analysis software for comparative meta-omics including comparative metagenomics.

Science.gov (United States)

Zhai, Peng; Yang, Longshu; Guo, Xiao; Wang, Zhe; Guo, Jiangtao; Wang, Xiaoqi; Zhu, Huaiqiu

2017-10-02

During the past decade, the development of high throughput nucleic sequencing and mass spectrometry analysis techniques have enabled the characterization of microbial communities through metagenomics, metatranscriptomics, metaproteomics and metabolomics data. To reveal the diversity of microbial communities and interactions between living conditions and microbes, it is necessary to introduce comparative analysis based upon integration of all four types of data mentioned above. Comparative meta-omics, especially comparative metageomics, has been established as a routine process to highlight the significant differences in taxon composition and functional gene abundance among microbiota samples. Meanwhile, biologists are increasingly concerning about the correlations between meta-omics features and environmental factors, which may further decipher the adaptation strategy of a microbial community. We developed a graphical comprehensive analysis software named MetaComp comprising a series of statistical analysis approaches with visualized results for metagenomics and other meta-omics data comparison. This software is capable to read files generated by a variety of upstream programs. After data loading, analyses such as multivariate statistics, hypothesis testing of two-sample, multi-sample as well as two-group sample and a novel function-regression analysis of environmental factors are offered. Here, regression analysis regards meta-omic features as independent variable and environmental factors as dependent variables. Moreover, MetaComp is capable to automatically choose an appropriate two-group sample test based upon the traits of input abundance profiles. We further evaluate the performance of its choice, and exhibit applications for metagenomics, metaproteomics and metabolomics samples. MetaComp, an integrative software capable for applying to all meta-omics data, originally distills the influence of living environment on microbial community by regression analysis

Project W-314 phase I environmental permits and approvals plan

International Nuclear Information System (INIS)

TOLLEFSON, K.S.

1999-01-01

This document describes the range of environmental actions, including required permits and other agency approvals, for Project W-314 activities in the Hanford Site's Tank Waste Remediation System. This document outlines alternative approaches to satisfying applicable environmental standards, and describes selected strategies for acquiring permits and other approvals needed for waste feed delivery to proceed. This document also includes estimated costs and schedule to obtain the required permits and approvals based on the selected strategy. It also provides estimated costs for environmental support during design and construction based on the preliminary project schedule provided

Incorporating sustainability into TxDOT's transportation decision making : summary of work performed, methods used, and results achieved.

Science.gov (United States)

2011-02-01

This report summarizes the work performed in Fiscal Year (FY) 2009 and 2010 under TxDOT : Implementation Project 5-5541-01 Regional Workshops on Sustainability Enhancement : Tool. TxDOT Research Project 0-5541, Developing Sustainable Tra...

MED and PSACH COMP mutations affect chondrogenesis in chicken limb bud micromass cultures.

Science.gov (United States)

Roman-Blas, J; Dion, A S; Seghatoleslami, M R; Giunta, K; Oca, P; Jimenez, S A; Williams, C J

2010-09-01

Mutations in cartilage oligomeric matrix protein (COMP) cause pseudoachondroplasia (PSACH) and multiple epiphyseal dysplasia (MED). We studied the effects of over-expression of wild type and mutant COMP on early stages of chondrogenesis in chicken limb bud micromass cultures. Cells were transduced with RCAS virus harboring wild type or mutant (C328R, PSACH; T585R, MED) COMP cDNAs and cultured for 3, 4, and 5 days. The effect of COMP constructs on chondrogenesis was assessed by analyzing mRNA and protein expression of several COMP binding partners. Cell viability was assayed, and evaluation of apoptosis was performed by monitoring caspase 3 processing. Over-expression of COMP, and especially expression of COMP mutants, had a profound affect on the expression of syndecan 3 and tenascin C, early markers of chondrogenesis. Over-expression of COMP did not affect levels of type II collagen or matrilin-3; however, there were increases in type IX collagen expression and sulfated proteoglycan synthesis, particularly at day 5 of harvest. In contrast to cells over-expressing COMP, cells with mutant COMP showed reduction in type IX collagen expression and increased matrilin 3 expression. Finally, reduction in cell viability, and increased activity of caspase 3, at days 4 and 5, were observed in cultures expressing either wild type or mutant COMP. MED, and PSACH mutations, despite displaying phenotypic differences, demonstrated only subtle differences in their cellular viability and mRNA and protein expression of components of the extracellular matrix, including those that interact with COMP. These results suggest that COMP mutations, by disrupting normal interactions between COMP and its binding partners, significantly affect chondrogenesis. (c) 2010 Wiley-Liss, Inc.

The I-35W bridge Project Website

DEFF Research Database (Denmark)

Kampf, Constance

How can websites be used to rebuild trust?  In August 2007, the Interstate Highway 35-W bridge in Minneapolis, MN collapsed during rush hour.  Although many people were rescued and casualties were as limited as could be expected due to quick and effective intervention, the image of a major bridge...... collapsing during rush hour damaged the Minnesota Department of Transportation's reputation and resulted in the loss of public trust for the organization.  The ensuing bridge reconstruction project included a project website intended to rebuild this trust through transparency, community involvement......, and the use of multimodal features.  This paper looks at the I35-W bridge reconstruction project in Minneapolis through web-based communication by the Minnesota Department of Transportation (MnDOT) about the project. The MnDOT bridge reconstruction website will be examined using a combination of 1). Weick...

Project W-420 stack monitoring system upgrades

International Nuclear Information System (INIS)

CARPENTER, K.E.

1999-01-01

This project will execute the design, procurement, construction, startup, and turnover activities for upgrades to the stack monitoring system on selected Tank Waste Remediation System (TWRS) ventilation systems. In this plan, the technical, schedule, and cost baselines are identified, and the roles and responsibilities of project participants are defined for managing the Stack Monitoring System Upgrades, Project W-420

Conceptual design report, plutonium stabilization and handling,project W-460

Energy Technology Data Exchange (ETDEWEB)

Weiss, E.V.

1997-03-06

Project W-460, Plutonium Stabilization and Handling, encompasses procurement and installation of a Stabilization and Packaging System (SPS) to oxidize and package for long term storage remaining plutonium-bearing special nuclear materials currently in inventory at the Plutonium Finishing Plant (PFP), and modification of vault equipment to allow storage of resulting packages of stabilized SNM for up to fifty years. This Conceptual Design Report (CDR) provides conceptual design details for the vault modification, site preparation and site interface with the purchased SPS. Two concepts are described for vault configuration; acceleration of this phase of the project did not allow completion of analysis which would clearly identify a preferred approach.

CompTIA security+ review guide exam SY0-401

CERN Document Server

Stewart , James M

2014-01-01

Focused review for the CompTIA Security+ certification exam The CompTIA Security+ certification offers tremendous opportunities for IT professionals. For those who want to take their careers to the next level, CompTIA Security+ Review Guide: Exam SY0-401 is here to serve as a great resource for certification preparation. This concise, focused guide is easy to use and is organized by each exam objective for quick review and reinforcement of key topics. You'll find information on network security, compliance and operational security, and threats and vulnerabilities. Additionally, this indispensa

CASP CompTIA Advanced Security Practitioner Study Guide Exam CAS-001

CERN Document Server

Gregg, Michael

2012-01-01

Get Prepared for CompTIA Advanced Security Practitioner (CASP) Exam Targeting security professionals who either have their CompTIA Security+ certification or are looking to achieve a more advanced security certification, this CompTIA Authorized study guide is focused on the new CompTIA Advanced Security Practitioner (CASP) Exam CAS-001. Veteran IT security expert and author Michael Gregg details the technical knowledge and skills you need to conceptualize, design, and engineer secure solutions across complex enterprise environments. He prepares you for aspects of the certification test that as

CompTIA A+ complete lab manual

CERN Document Server

Pyles, James

2012-01-01

Boost your understanding of CompTIA A+ exam principles with practical, real-world exercises Designed to complement CompTIA A+ Complete Study Guide, this hands-on companion book takes you step by step through the tasks a PC technician is likely to face on any given day. It supports the theory explained in the test-prep guide with additional practical application, increasing a new PC technician's confidence and marketability. Various scenarios incorporate roadblocks that may occur on the job and explain ways to successfully complete the task at hand. In addition, each task is mapped to a specif

Project W-320, waste retrieval sluicing system: BIO/SER implementation matrices

International Nuclear Information System (INIS)

Bailey, J.W.

1998-01-01

This document provides verification that the safety related commitments specified in HNF-SD-WM-810-001, Addendum 1 for the Waste Retrieval Sluicing System, Project W-320 and Project W-320 Safety Evaluation Report (SER), have been implemented in the project hardware, procedures and administrative controls. Four appendices include matrices which show where the 810 commitments are implemented for limiting conditions of operation and surveillance requirements controls, administrative controls, defense-in-depth controls and controls discussed in 810 Addendum 1. A fifth appendix includes the implementation of Project W-320 SER issues and provisions

Conceptual design report for tank farm restoration and safe operations, project W-314

Energy Technology Data Exchange (ETDEWEB)

Briggs, S.R., Westinghouse Hanford

1996-05-02

This Conceptual Design Report (CDR) presents the conceptual level design approach that satisfies the established technical requirements for Project W-314, `Tank Farm Restoration and Safe Operations.` The CDR also addresses the initial cost and schedule baselines for performing the proposed Tank Farm infrastructure upgrades. The scope of this project includes capital improvements to Hanford`s existing tank farm facilities(primarily focused on Double- Shell Tank Farms) in the areas of instrumentation/control, tank ventilation, waste transfer, and electrical systems.

Development of 10kW SOFC module

Energy Technology Data Exchange (ETDEWEB)

Hisatome, N.; Nagata, K. [Mitsubishi Heavy Industries, Ltd., Nagasaki (Japan); Kakigami, S. [Electric Power Development Co., Inc., Tokyo (Japan)] [and others

1996-12-31

Mitsubishi Heavy industries, Ltd. (MHI) has been developing tubular type Solid Oxide Fuel Cells (SOFC) since 1984. A 1 kW module of SOFC has been continuously operated for 3,000 hours with 2 scheduled thermal cycles at Electric Power Development Co., Inc. (EPDC) Wakamatsu Power Station in 1993. We have obtained of 34% (HHV as H{sub 2}) module efficiency and deterioration rate of 2% Per 1,000 hours in this field test. As for next step, we have developed 10 kW module in 1995. The 10 kW module has been operated for 5,000 hours continuously. This module does not need heating support to maintain the operation temperature, and the module efficiency was 34% (HHV as H{sub 2}). On the other hand, we have started developing the technology of pressurized SOFC. In 1996, pressurized MW module has been tested at MHI Nagasaki Shipyard & Machinery, Works. We are now planning the development of pressurized 10 kW module.

W-320 Project thermal modeling

Energy Technology Data Exchange (ETDEWEB)

Sathyanarayana, K., Fluor Daniel Hanford

1997-03-18

This report summarizes the results of thermal analysis performed to provide a technical basis in support of Project W-320 to retrieve by sluicing the sludge in Tank 241-C-106 and to transfer into Tank 241-AY-102. Prior theraml evaluations in support of Project W-320 safety analysis assumed the availability of 2000 to 3000 CFM, as provided by Tank Farm Operations, for tank floor cooling channels from the secondary ventilation system. As this flow availability has no technical basis, a detailed Tank 241-AY-102 secondary ventilation and floor coating channel flow model was developed and analysis was performed. The results of the analysis show that only about 150 cfm flow is in floor cooLing channels. Tank 241-AY-102 thermal evaluation was performed to determine the necessary cooling flow for floor cooling channels using W-030 primary ventilation system for different quantities of Tank 241-C-106 sludge transfer into Tank 241-AY-102. These sludge transfers meet different options for the project along with minimum required modification of the ventilation system. Also the results of analysis for the amount of sludge transfer using the current system is presented. The effect of sludge fluffing factor, heat generation rate and its distribution between supernatant and sludge in Tank 241-AY-102 on the amount of sludge transfer from Tank 241-C-106 were evaluated and the results are discussed. Also transient thermal analysis was performed to estimate the time to reach the steady state. For a 2 feet sludge transfer, about 3 months time will be requirad to reach steady state. Therefore, for the purpose of process control, a detailed transient thermal analysis using GOTH Computer Code will be required to determine transient response of the sludge in Tank 241-AY-102. Process control considerations are also discussed to eliminate the potential for a steam bump during retrieval and storage in Tanks 241-C-106 and 241-AY-102 respectively.

Project W-211 initial tank retrieval systems year 2000 compliance assessment project plan

International Nuclear Information System (INIS)

BUSSELL, J.H.

1999-01-01

This document contains a limited assessment of Year 2000 compliance for Project W-211. Additional information is provided as a road map to project documents and other references that may be used to verify Year 2000 compliance

Project W-049H disposal facility test report

International Nuclear Information System (INIS)

Buckles, D.I.

1995-01-01

The purpose of this Acceptance Test Report (ATR) for the Project W-049H, Treated Effluent Disposal Facility, is to verify that the equipment installed in the Disposal Facility has been installed in accordance with the design documents and function as required by the project criteria

Tank farm restoration and safe operation, Project W-314, upgrade scope summary report (USSR)

International Nuclear Information System (INIS)

Gilbert, J.L.

1998-01-01

The revision to the Project W-314 Upgrade Scope Summary Report (USSR), incorporates changes to the project scope from customer guidance. Included are incorporation of the recommendations from HNF-2500, agreements regarding interfaces with Project W-211, and assumption of scope previously assigned to Project W-454

CompTIA Security+ Deluxe Study Guide Exam SY0-301

CERN Document Server

Dulaney, Emmett

2011-01-01

Get a host of extras with this Deluxe version including a Security Administration Simulator!  Prepare for CompTIA's new Security+ exam SY0-301 with this Deluxe Edition of our popular CompTIA Security+ Study Guide, 5th Edition. In addition to the 100% coverage of all exam essentials and study tools you'll find in the regular study guide, the Deluxe Edition gives you over additional hands-on lab exercises and study tools, three additional practice exams, author videos, and the exclusive Security Administration simulator. This book is a CompTIA Recommended product. Provides 100% coverage of all e

Advanced conceptual design report. Phase II. Liquid effluent treatment and disposal Project W-252

International Nuclear Information System (INIS)

1995-01-01

This Advanced Conceptual Design Report (ACDR) provides a documented review and analysis of the Conceptual Design Report (CDR), WHC-SD-W252-CDR-001, June 30, 1993. The ACDR provides further design evaluation of the major design approaches and uncertainties identified in the original CDR. The ACDR will provide a firmer basis for the both the design approach and the associated planning for the performance of the Definitive Design phase of the project

CompTox Chemistry Dashboard webinar

Science.gov (United States)

The CompTox Chemistry Dashboard is part of a suite of dashboards developed by EPA to help evaluate the safety of chemicals. The dashboard provides access to a variety of information on over 700,000 chemicals currently in use. Within the application, users

COMP-Ang1 Recovers Hematopoiesis after Gamma-ray Irradiation in Mice

International Nuclear Information System (INIS)

Lee, Hae-June; Lee, Yoon-Jin; Kwon, Hee-Choong; Lee, Su-Jae; Bae, Sang-Woo; Lee, Yun-Sil; Kim, Sung-Ho

2006-01-01

It has been reported that angiopoietin (Ang1) enhanced the ability of hematopoietic stem cells (HSCs) to become quiescent and induced adhesion to bone, resulting in protection of the HSC compartment from myleosuppressive stress. Ang1 activates Tie2 receptors expressed on the vascular endothelial cells and HSCs expressing the receptor tyrosine kinase Tie2 are quiescent and antiapoptotic, comprise a sidepopulation of HSCs. COMP-Ang1 is generated protein, is a soluble, stable, and potent Ang1 variant by replacing the N-terminal portion of Ang1 with short coiled-coil domain of cartilage oligomeric matrix protein (COMP). Radio- and chemotherapy induces considerable damage of bone marrow. Herein, by using COMP-Ang1, we investigated the effect of COMP-Ang1 on restoration of hematopoiesis in bone marrow against radiation-induced myelosuppression

Systems engineering management and implementation plan for Project W-464, immobilized high-level waste storage

International Nuclear Information System (INIS)

Wecks, M.D.

1998-01-01

The Systems Engineering Management and Implementation Plan (SEMIP) for TWRS Project W-46 describes the project implementation of the Tank Waste Remediation System Systems Engineering Management Plan. (TWRS SEMP), Rev. 1. The SEMIP outlines systems engineering (SE) products and processes to be used by the project for technical baseline development. A formal graded approach is used to determine the products necessary for requirements, design, and operational baseline completion. SE management processes are defined, and roles and responsibilities for management processes and major technical baseline elements are documented

Systems engineering management and implementation plan for Project W-465, immobilized low-activity waste storage

International Nuclear Information System (INIS)

Kaspar, J.R.; Latray, D.A.

1998-01-01

The Systems Engineering Management and Implementation Plan (SEMIP) for TWRS Project W-465 describes the project implementation of the Tank Waste Remediation System Systems Engineering Management Plan (TWRS SEMP), Rev. 1. The SEMIP outlines systems engineering (SE) products and processes to be used by the project for technical baseline development. A formal graded approach is used to determine the products necessary for requirements, design, and operational baseline completion. SE management processes are defined, and roles and responsibilities for management processes and major technical baseline elements are documented

COMP-1 promotes competitive advantage of nematode sperm.

Science.gov (United States)

Hansen, Jody M; Chavez, Daniela R; Stanfield, Gillian M

2015-03-19

Competition among sperm to fertilize oocytes is a ubiquitous feature of sexual reproduction as well as a profoundly important aspect of sexual selection. However, little is known about the cellular mechanisms sperm use to gain competitive advantage or how these mechanisms are regulated genetically. In this study, we utilize a forward genetic screen in Caenorhabditis elegans to identify a gene, comp-1, whose function is specifically required in competitive contexts. We show that comp-1 functions in sperm to modulate their migration through and localization within the reproductive tract, thereby promoting their access to oocytes. Contrary to previously described models, comp-1 mutant sperm show no defects in size or velocity, thereby defining a novel pathway for preferential usage. Our results indicate not only that sperm functional traits can influence the outcome of sperm competition, but also that these traits can be modulated in a context-dependent manner depending on the presence of competing sperm.

Fabrication and Characterization of novel W80Ni10Nb10 alloy produced by mechanical alloying

Science.gov (United States)

Saxena, R.; Patra, A.; Karak, S. K.; Pattanaik, A.; Mishra, S. C.

2016-02-01

Nanostructured tungsten (W) based alloy with nominal composition of W80Ni10Nb10 (in wt. %) was synthesized by mechanical alloying of elemental powders of tungsten (W), nickel (Ni), niobium (Nb) in a high energy planetary ball-mill for 20 h using chrome steel as grinding media and toluene as process control agent followed by compaction at 500 MPa pressure for 5 mins and sintering at 1500°C for 2 h in Ar atmosphere. The phase evolution and the microstructure of the milled powder and consolidated product were investigated by X-ray diffraction (XRD), Scanning electron microscopy (SEM) and Transmission electron microscopy (TEM). The crystallite size of W in W80Ni10Nb10 powder was reduced from 100 μm at 0 h to 45.6 nm at 10 h and 34.1 nm at 20 h of milling whereas lattice strain increases to 35% at 20 h of milling. The dislocation density shows sharp increase up to 5 h of milling and the rate of increase drops beyond 5 to 20 h of milling. The lattice parameter of tungsten in W80Ni10Nb10 expanded upto 0.04% at 10 h of milling and contracted upto 0.02% at 20 h of milling. The SEM micrograph revealed the presence of spherical and elongated particles in W80Ni10Nb10 powders at 20 h of milling. The particle size decreases from 100 μm to 2 μm with an increase in the milling time from 0 to 20 hours. The crystallite size of W in milled W80Ni10Nb10 alloy as evident from bright field TEM image was in well agreement with the measured crystallite size from XRD. Structure of W in 20 h milled W80Ni10Nb10 alloy was identified by indexing of selected area diffraction (SAD) pattern. Formation of NbNi intermetallic was evident from XRD pattern and SEM micrograph of sintered alloy. Maximum sinterability of 90.8% was achieved in 20 h milled sintered alloy. Hardness and wear study was also conducted to investigate the mechanical behaviour of the sintered product. Hardness of W80Ni10Nb10 alloy reduces with increasing load whereas wear rate increases with increasing load. The evaluated

Dry well conductivity monitoring report for Tanks W-8, W-9, and W-10, Oak Ridge National Laboratory, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

1997-10-01

A treatability study and waste removal program are being implemented for the Gunite ad Associated Tanks Operable Unit at Oak Ridge National Laboratory, Oak Ridge, Tennessee. This report documents the instrumentation and monitoring efforts to establish baseline conductivity conditions. The simulated liquid release (SLR) testing reported here demonstrates the effectiveness of the Conductivity-monitoring method (CMM) as a liquid-release detection method for consolidation Tanks W-8 and W-9 and Tank W-10 in the South Tank Farm (STF). The results show the remarkable sensitivity of the CMM to even very small simulated releases from the tank. The SLR testing for DW-8, DW-9 and DW-10 show that the dry well conductivity monitoring will be effective in detecting potential releases from the tanks during waste removal operations. The data in this report also make clear statements about the inferred integrity of the tanks, tank pads, and drain system: (1) the data substantiate earlier work and show that Tanks W-8, W-9, and W-10 are not leaking; (2) the data show that the pads under Tanks W-8, W-9, and W-10 are integral and connected to the dry wells; (3) the STF drain system appears to be functioning properly. This report presents these results and describes the release monitoring plan for the consolidation tanks and during waste removal operations at all of the tanks in the STF

Structure Identification Using High Resolution Mass Spectrometry Data and the EPA’s CompTox Chemistry Dashboard (EAS)

Science.gov (United States)

The iCSS CompTox Dashboard is a publicly accessible dashboard provided by the National Center for Computation Toxicology at the US-EPA. It serves a number of purposes, including providing a chemistry database underpinning many of our public-facing projects (e.g. ToxCast and ExpoC...

L’OCDE évalue les compétences des adultes

OpenAIRE

Bardi, Anne-Marie

2014-01-01

Une dizaine d’années après les premiers résultats du Programme international de suivi des acquis des élèves (PISA), l’Organisation de coopération et de développement économiques (OCDE) livre une étude sur les compétences des adultes de 16 à 65 ans. Ce nouveau Programme pour l’évaluation internationale des compétences des adultes (PIIAC) est conçu en cycles, dont le premier s’achève en 2013. Il vise à informer sur la maîtrise des compétences jugées indispensables pour évoluer dans un monde hyp...

Project W-420 Ventilation Stack Monitoring System Year 2000 Compliance Assessment Project Plan

International Nuclear Information System (INIS)

BUSSELL, J.H.

1999-01-01

This document contains a limited assessment of Year 2000 compliance for Project W-420. Additional information is provided as a road map to project documents and other references that may be used to verify Year 2000 compliance. This assessment describes the potential Year 2000 (Y2K) problems and describes the methods for achieving Y2K Compliance for Project W-420, Ventilation Stack Monitoring Systems Upgrades. The purpose of this assessment is to give an overview of the project. This document will not be updated and any dates contained in this document are estimates and may change. The project work scope includes upgrades to ventilation stacks and generic effluent monitoring systems (GEMS) at the 244-A Double Contained Receiver Tank (DCRT), the 244-BX DCRT, the 244-CR Vault, tanks 241-C-105 and 241-C-106, the 244-S DCRT, and the 244-TX DCRT. A detailed description of system dates, functions, interfaces, potential Y2K problems, and date resolutions can not be described since the project is in the definitive design phase, This assessment will describe the methods, protocols, and practices to ensure that equipment and systems do not have Y2K problems

Project W-519 TWRS privatization phase 1 infrastructure year 2000 compliance assessment project plan

International Nuclear Information System (INIS)

BUSSELL, J.H.

1999-01-01

This document contains a limited assessment of Year 2000 compliance for Project W-519. Additional information is provided as a road map to project documents and other references that may be used to verify Year 2000 compliance

Highlights from the Future Earth Water-Energy-Food (W-E-F) Nexus Cluster Project Consultations

Science.gov (United States)

Lawford, R. G.

2017-12-01

Future Earth launched its W-E-F Nexus project in 2015. The focus of the project was to explore how improved governance and integrated information systems could support sustainability in the W-E-F Nexus. Workshops were held in four regions of the world (North America, Europe, Eastern Asia, and Southern Africa) which facilitated a better understanding of the current role of information in decision-making within the W-E-F Nexus. In each of these workshops, needs and options for improving the provision of relevant integrated data and information to support decision-making were discussed. The workshops provided distinct perspectives on W-E-F issues for each region and each sector. Regional differences arise from climate, geomorphology, natural resources and existing infrastructure as well as the economic and social policies within each country. While the needs associated with this diversity are large, it is still possible to identify unifying themes and requirements for data and information which appeared very similar in all the regions. Important themes involve developing a common rigorous definition of the Nexus, ensuring the availability of data of all types are available in the scales, frequencies, and accuracies needed to support better decision making; and promoting the gathering, analysis and use of information to break down the silos associated with the three sectors are made. Information is also needed to monitor the effects of land ownership and land management on W-E-F issues, to maximize the efficiencies that can be realized from joint planning and increased coherence in the sectoral policy approaches to address climate and environmental issues. After commenting on these opportunities the presentation will outline possible elements of a research agenda for moving the W-E-F Nexus approach forward.

Emprego experimental da placa de compósito poli-hidroxibutirado/hidroxiapatita na fixação femoral em gatos

Directory of Open Access Journals (Sweden)

E.G.L. Alves

2010-10-01

Full Text Available Avaliou-se o compósito de poli-hidroxibutirado (PHB 70% e hidroxiapatita (HA 30% na forma de placas para fixação óssea em gatos. Foram usadas placas do compósito com 60mm de comprimento por 10mm de largura e espessura variando de 3mm no centro a 5mm nas extremidades, com seis orifícios. A placa do compósito foi empregada na fixação de osteotomia de fêmur em quatro gatos, totalizando seis intervenções. Verificou-se a ruptura de cinco placas (83,3% até o quarto dia e de uma placa (16,7% aos 21 dias, quando se observou um calo ósseo exuberante. O resultado da implantação da placa no gato mostrou que o compósito não possui resistência suficiente para ser empregado como placas de fixação de fêmur em gatos.

Tennessee Comptroller of the Treasury (TN COMP)

Data.gov (United States)

Social Security Administration — The Tennessee Comptroller of the Treasury (TN COMP) uses SSA's assistance in administering the Tennessee Property Tax Rebate Program. SSA provides assistance through...

Project management plan for Project W-178, 219-S secondary containment

International Nuclear Information System (INIS)

Buckles, D.I.

1995-01-01

This Project Management Plan (PMP) establishes the organizational responsibilities, control systems, and procedures for managing the execution of project activities for Project W-178, the 219-S Secondary Containment Upgrade. The scope of this project will provide the 219-S Facility with secondary containment for all tanks and piping systems. Tank 103 will be replaced with a new tank which will be designated as Tank 104. Corrosion protection shall be installed as required. The cells shall be cleaned and the surface repaired as required. The 219-S Waste Handling Facility (219-S Facility), located in the 200 West Area, was constructed in 1951 to support the 222-S Laboratory Facility. The 219-S Facility has three tanks, TK-101, TK-102, and TK-103, which receive and neutralize low level radioactive wastes from the 222-S Laboratory. For purposes of the laboratory, the different low level waste streams have been designated as high activity and intermediate activity. The 219-S Facility accumulates and treats the liquid waste prior to transferring it to SY Tank Farm in the 200-W Area. Transfers are normally made by pipeline from the 219-S Facility to the 241-SY Tank Farm. Presently transfers are being made by tanker truck to the 200-E Area Tank Farms due to the diversion box catch tank which has been removed from service

Project W-049H Collection System Acceptance Test

International Nuclear Information System (INIS)

Buckles, D.I.

1994-01-01

The Acceptance Test Procedure (ATP) Program for Project W-049H covers the following activities: Disposal system, Collection system, Instrumentation and control system. Each activity has its own ATP. The purpose of the ATPs is to verify that the systems have been constructed in accordance with the construction documents and to demonstrate that the systems function as required by the Project criteria. This ATP has been prepared to demonstrate that the Collection System Instrumentation functions as required by project criteria

76 FR 45906 - Proposed Collection; Comment Request for Form W-10

Science.gov (United States)

2011-08-01

... W-10 AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice and request for comments... Form W-10, Dependent Care Provider's Identification and Certification. DATES: Written comments should... Certification. OMB Number: 1545-XXXX. Form Number: Form W-10. Abstract: The proposed collection of information...

Apprentissage mobile et acquisition de la compétence pluriculturelle

Directory of Open Access Journals (Sweden)

LI Yue

2016-11-01

Full Text Available À mesure de l’évolution accélérée des technologies modernes, de nouveaux moyens d’apprentissage sont apparus dans le domaine de l’éducation, ce qui nous amène à nous demander comment en profiter en vue de favoriser l’enseignement/apprentissage du FLE. Dans cet article, nous prêtons une attention particulière à l’application de l’apprentissage mobile dans l’acquisition de la compétence pluriculturelle. Après une analyse de la compétence pluriculturelle, de l’apprentissage mobile, et de sa potentialité de développement en Chine, nous présentons les applications potentielles de l’apprentissage mobile dans l’acquisition de la compétence pluriculturelle des apprenants chinois de français.

SDN-controlled topology-reconfigurable optical mobile fronthaul architecture for bidirectional CoMP and low latency inter-cell D2D in the 5G mobile era.

Science.gov (United States)

Cvijetic, Neda; Tanaka, Akihiro; Kanonakis, Konstantinos; Wang, Ting

2014-08-25

We demonstrate the first SDN-controlled optical topology-reconfigurable mobile fronthaul (MFH) architecture for bidirectional coordinated multipoint (CoMP) and low latency inter-cell device-to-device (D2D) connectivity in the 5G mobile networking era. SDN-based OpenFlow control is used to dynamically instantiate the CoMP and inter-cell D2D features as match/action combinations in control plane flow tables of software-defined optical and electrical switching elements. Dynamic re-configurability is thereby introduced into the optical MFH topology, while maintaining back-compatibility with legacy fiber deployments. 10 Gb/s peak rates with <7 μs back-to-back transmission latency and 29.6 dB total power budget are experimentally demonstrated, confirming the attractiveness of the new approach for optical MFH of future 5G mobile systems.

Project W-151 Tank 101-AZ Waste Retrieval System Year 2000 Compliance Assessment Project Plan

International Nuclear Information System (INIS)

BUSSELL, J.H.

1999-01-01

This document contains a limited assessment of Year 2000 compliance for Project W-151. Additional information is provided as a road map to project documents and other references that may be used to verify Year 2000 compliance

Entre structure et action : la compétence communicative des TIC

Directory of Open Access Journals (Sweden)

Serge Agostinelli

2011-06-01

Full Text Available Cet article théorique explore comment les concepts de structure et d’action permettent une approche originale du concept de compétence dans le domaine des TIC. Cette approche relève d’une recherche de compatibilité entre des modèles issus des Technologies qui proposent les structures socio-techniques et ceux des Sciences Humaines qui organisent l’action des individus. Les modèles théoriques invoqués de domaines disciplinaires différents (sociologie, ethnométhodologie, psychologie sociale, linguistique, sciences de l’éducation et sciences de l’information-communication donnent au concept de compétence en TIC une nouvelle consistance, plus anthropocentrée et moins technico-pratique. Ils posent la question du rapport entre micro et macro, du rapport de l’individu au groupe, et posent aussi la question ontologique des structures. Les compétences ne se réduisent pas à la seule connaissance des aspects techniques, mais sont élargies à la maîtrise des conditions d’utilisation adéquate et des possibilités offertes par la technique. Utiliser les technologies, c’est construire de la relation grâce aux compétences communicatives des TIC.This theoretical article investigates how the concepts of structure and action allow an original approach of the concept of skill in the field of ICT. This approach concerns a search for compatibility between stemming models Technologies which propose the socio-technical structures and those of the Human Sciences who organize the action of the individuals. The theoretical models called by different disciplinary domains (sociology, ethnomethodology, social psychology, linguistic, education, communication and information science give to the concept of skill in ICT a new consistency, more anthropology centred and less technico-practical. They ask the question of the relationship between micro and macro, the relationship of the individual to the group, and also ask the ontological question

Conflict Approaches of Effective Project Manager in the Upstream Sector of Indonesian Oil & Gas Industry

OpenAIRE

Adhi Cahyono; Yanki Hartijasti

2012-01-01

Conflict can be functional or dysfunctional to the organization’s performance. This study focused on the relationship between conflict approaches implemented by the project manager based on project team member’s perception on the effectiveness of the project manager in managing project’s conflict. Questionnaires were modified from Barker et al. (1988) to measure conflict management approaches and outcomes of managing project conflict. Data were gathered from 57 respondents w...

Project W-030 safety class upgrade summary report

International Nuclear Information System (INIS)

Kriskovich, J.R.

1998-01-01

This document presents a summary of safety class criteria for the 241-AY/AZ Tank Farm primary ventilation system upgrade under Project W-030, and recommends acceptance of the system as constructed, based on a review of supporting documentation

Interface control document for tank waste remediation system privatization phase 1 infrastructure support Project W-519

International Nuclear Information System (INIS)

Parazin, R.J.

1998-01-01

This document describes the functional and physical interfaces between the Tank Waste Remediation System (TWRS) Privatization Phase 1 Infrastructure Project W-519 and the various other projects (i.e., Projects W-314, W-464, W-465, and W-520) supporting Phase 1 that will require the allocation of land in and about the Privatization Phase 1 Site and/or interface with the utilities extended by Project W-519. Project W-519 will identify land use allocations and upgrade/extend several utilities in the 200-East Area into the Privatization Phase 1 Site (formerly the Grout Disposal Compound) in preparation for the Privatization Contractors (PC) to construct treatment facilities. The project will upgrade/extend: Roads, Electrical Power, Raw Water (for process and fire suppression), Potable Water, and Liquid Effluent collection. The replacement of an existing Sanitary Sewage treatment system that may be displaced by Phase 1 site preparation activities may also be included

CompTIA A+ complete study guide exams 220-801 and 220-802

CERN Document Server

Docter, Quentin; Skandier, Toby

2012-01-01

CompTIA Authorized, fully updated Study Guide for the leading IT certification: CompTIA A+ CompTIA A+ is the de facto certification for IT technicians. Some vendors even require employees to achieve certification as part of their job training. This book prepares you for both required exams: 220-801 and 220-802. Totally updated to cover the 2012 exams, this popular prep guide covers all the exam objectives. Readers will also have access to additional study tools, including the Sybex Test Engine with bonus practice exams, electronic flashcards, and a glossary of important terms in searchable PD

Project W-058 monitor and control system logic

International Nuclear Information System (INIS)

ROBERTS, J.B.

1999-01-01

This supporting document contains the printout of the control logic for the Project W-058 Monitor and Control System, as developed by Programmable Control Services, Inc. The logic is arranged in five appendices, one for each programmable logic controller console

Risk Management Plan for Tank Farm Restoration and Safe Operations, Project W-314

International Nuclear Information System (INIS)

MCGREW, D.L.

2000-01-01

The Risk Management Plan for Project W-314 describes the systems, processes and procedures for implementation of applicable risk management practices described in HNF-0842, Volume IV, Section 2.6, ''Risk Management''. This plan is tailored specifically for use by Project W-314

System Safety Program Plan for Project W-314, tank farm restoration and safe operations

International Nuclear Information System (INIS)

Boos, K.A.

1996-01-01

This System Safety Program Plan (SSPP) outlines the safety analysis strategy for project W-314, ''Tank Farm Restoration and Safe Operations.'' Project W-314 will provide capital improvements to Hanford's existing Tank Farm facilities, with particular emphasis on infrastructure systems supporting safe operation of the double-shell activities related to the project's conceptual Design Phase, but is planned to be updated and maintained as a ''living document'' throughout the life of the project to reflect the current safety analysis planning for the Tank Farm Restoration and Safe Operations upgrades. This approved W-314 SSPP provides the basis for preparation/approval of all safety analysis documentation needed to support the project

340 Facility Secondary Containment and Leak Detection Project W-302 Functional Design Criteria

Energy Technology Data Exchange (ETDEWEB)

Stordeur, R.T.

1995-03-01

This functional design criteria for the upgrade to the 340 radioactive liquid waste storage facility (Project W-302) specifically addresses the secondary containment issues at the current vault facility of the 340 Complex. This vault serves as the terminus for the Radioactive Liquid Waste System (RLWS). Project W-302 is necessary in order to bring this portion of the Complex into full regulatory compliance. The project title, ``340 Facility Secondary Containment and Leak Detection``, illustrates preliminary thoughts of taking corrective action directly upon the existing vault (such as removing the tanks, lining the vault, and replacing tanks). However, based on the conclusion of the engineering study, ``Engineering Study of the 300 Area Process Wastewater Handling System``, WHC-SD-WM-ER-277 (as well as numerous follow-up meetings with cognizant staff), this FDC prescribes a complete replacement of the current tank/vault system. This offers a greater array of tanks, and provides greater operating flexibility and ease of maintenance. This approach also minimizes disruption to RLWS services during ``tie-in``, as compared to the alternative of trying to renovate the old vault. The proposed site is within the current Complex area, and maintains the receipt of RLWS solutions through gravity flow.

Functions and requirements for tank farm restoration and safe operations, Project W-314. Revision 3

International Nuclear Information System (INIS)

Garrison, R.C.

1995-01-01

This Functions and Requirements document (FRD) establishes the basic performance criteria for Project W-314, in accordance with the guidance outlined in the letter from R.W. Brown, RL, to President, WHC, ''Tank Waste Remediation System (TWRS) Project Documentation Methodology,'' 94-PRJ-018, dated 3/18/94. The FRD replaces the Functional Design Criteria (FDC) as the project technical baseline documentation. Project W-314 will improve the reliability of safety related systems, minimize onsite health and safety hazards, and support waste retrieval and disposal activities by restoring and/or upgrading existing Tank Farm facilities and systems. The scope of Project W-314 encompasses the necessary restoration upgrades of the Tank Farms' instrumentation, ventilation, electrical distribution, and waste transfer systems

Tank waste remediation system privatization Phase 1 infrastructure, project W-519, project execution plan

International Nuclear Information System (INIS)

Parazin, R.J.

1998-01-01

This Project Execution Plan (PEP) defines the overall strategy, objectives, and contractor management requirements for the execution phase of Project W-519 (98-D403), Privatization Phase 1 Infrastructure Support, whose mission is to effect the required Hanford site infrastructure physical changes to accommodate the Privatization Contractor facilities. This plan provides the project scope, project objectives and method of performing the work scope and achieving objectives. The plan establishes the work definitions, the cost goals, schedule constraints and roles and responsibilities for project execution. The plan also defines how the project will be controlled and documented

Quality Assurance program plan - plutonium stabilization and handling project W-460

International Nuclear Information System (INIS)

SCHULTZ, J.W.

1999-01-01

This Quality Assurance Program Plan (QAPP) identifies Project Quality Assurance (QA) program requirements for all parties participating in the design, procurement, demolition, construction, installation, inspection and testing for Project W-460

Project Execution Plan for Project W-211 Initial Tank Retrieval Systems (ITRS)

International Nuclear Information System (INIS)

VAN BEEK, J.E.

2000-01-01

This Project Execution Plan documents the methodology for managing Project W-211. Project W-211, Initial Tank Retrieval Systems (ITRS), is a fiscal year 1994 Major Systems Acquisition that will provide systems for retrieval of radioactive wastes from selected double-shell tanks (DST). The contents of these tanks are a combination of supernatant liquids and settled solids. To retrieve waste from the tanks, it is first necessary to mix the liquid and solids prior to transferring the slurry to alternative storage or treatment facilities. The ITRS will provide systems to mobilize the settled solids and transfer the wastes out of the tanks. In so doing, ITRS provides feed for the future waste treatment plant, allows for consolidation of tank solids to manage space within existing DST storage capacity, and supports continued safe storage of tank waste. The ITRS scope has been revised to include waste retrieval systems for tanks AP-102, AP-104, AN-102, AN-103, AN-104, AN-105, AY-102, AZ-102, and SY-102. This current tank selection and sequence provides retrieval systems supporting the River Protection Project (RF'P) Waste Treatment Facility and sustains the ability to provide final remediation of several watch list DSTs via treatment. The ITRS is configured to support changing program needs, as constrained by available budget, by maintaining the flexibility for exchanging tanks requiring mixer pump-based retrieval systems and shifting the retrieval sequence. Preliminary design was configured such that an adequate basis exists for initiating Title II design of a mixer pump-based retrieval system for any DST. This Project Execution Plan (PEP), derived from the predecessor Project Management Plan, documents the methodology for managing the ITRS, formalizes organizational responsibilities and interfaces, and identifies project requirements such as change control, design verification, systems engineering, and human factors engineering

Autosomal dominant precocious osteoarthropathy due to a mutation of the cartilage oligomeric matrix protein (COMP) gene: further expansion of the phenotypic variations of COMP defects

Energy Technology Data Exchange (ETDEWEB)

Kawaji, Hiroyuki [Department of Orthopaedic Surgery, Sanyudo Hospital, 6-1-219 Chuou, Yonezawa, Yamagata 992-0045 (Japan); Nishimura, Gen [Department of Radiology, Nasu Chuou Hospital, Tochigi (Japan); Watanabe, Sobei; Sasaki, Akira; Sano, Tokuhisa [Department of Orthopaedic Surgery, Tohoku Kohsei-Nenkin Hospital, Miyagi (Japan); Mabuchi, Akihiko; Ikeda, Toshiyuki; Ikegawa, Shiro [Laboratory for Bone and Joint Diseases, SNP Research Center, Tokyo (Japan); Ohashi, Hirofumi [Division of Medical Genetics, Saitama Children' s Medical Center, Saitama (Japan)

2002-12-01

We report on a Japanese family of four generations with an autosomal dominant precocious osteoarthropathy. The cardinal clinical manifestations of affected individuals were painful weight-bearing large joints, which started in late childhood or adolescence. The radiological hallmarks included coxa plana, mild epiphyseal dysplasia of the knee, and round talar domes with tibiotalar slant in childhood, which evolved into degenerative joint diseases in adulthood. The disease phenotype was cosegregated with a mutation of the cartilage oligomeric matrix protein (COMP) gene in the family members, who underwent molecular evaluation. COMP mutations have been reported in a mild form of multiple epiphyseal dysplasia (MED), Ribbing type, as well as allied disorders with more severe manifestations, such as MED Fairbank type and pseudoachondroplasia. Unlike previously reported cases with the Ribbing type, the present patients did not have short stature or brachydactyly. This report expands further the phenotypic variations of COMP defects. (orig.)

Accident consequence calculations for project W-058 safety analysis

International Nuclear Information System (INIS)

Van Keuren, J.C.

1997-01-01

This document describes the calculations performed to determine the accident consequences for the W-058 safety analysis. Project W-058 is the replacement cross site transfer system (RCSTS), which is designed to transort liquid waste between the 200 W and 200 E areas. Calculations for RCSTS safety analyses used the same methods as the calculations for the Tank Waste Remediation System (TWRS) Basis for Interim Operation (BIO) and its supporting calculation notes. Revised analyses were performed for the spray and pool leak accidents since the RCSTS flows and pressures differ from those assumed in the TWRS BIO. Revision 1 of the document incorporates review comments

Solid Waste Operations Complex W-113: Project cost estimate. Preliminary design report. Volume IV

International Nuclear Information System (INIS)

1995-01-01

This document contains Volume IV of the Preliminary Design Report for the Solid Waste Operations Complex W-113 which is the Project Cost Estimate and construction schedule. The estimate was developed based upon Title 1 material take-offs, budgetary equipment quotes and Raytheon historical in-house data. The W-113 project cost estimate and project construction schedule were integrated together to provide a resource loaded project network

TWRS phase 1 infrastructure project (W-519) characterization

International Nuclear Information System (INIS)

Mitchell, C.J.

1998-01-01

In order to treat the mixed radioactive and hazardous waste stored in 177 underground tanks, the Tank Waste Remediation System (TWRS) program is developing a 'demonstration' site for treatment and immobilization of these wastes by a private contractor. Project W-519 is providing the infrastructure support to this site by developing the designs and emplacing required pipelines, roads, electrical, etc. In support of the TWRS Phase 1 Infrastructure Project (W-519) Characterization, Numatec Hanford Corporation (NHC) contracted with Waste Management Federal Services, Inc., Northwest Operations (WMNW) to investigate a number of locations in and just outside the 200 East Area eastern fenceline boundary. These areas consisted of known or suspected waste lines or waste sites that could potentially impact the construction and emplacement of the proposed facility improvements, including waterlines and roads. These sites were all located subsurface and sugaring would be required to obtain sample material from the desired depth. The soils would then be sampled and submitted to the laboratory for analysis of radioactivity

Efeito do tratamento alcalino de fibras de Curauá sobre as propriedades de compósitos de matriz biodegradável

Directory of Open Access Journals (Sweden)

Lílian Vanessa Rossa Beltrami

2014-06-01

Full Text Available Neste trabalho avaliou-se a influência do tratamento alcalino das fibras de curauá, nas concentrações de 1, 5 e 10%(m/v de NaOH, nas propriedades dos compósitos com matriz de PHBV e 20% m/m de fibras de curauá. Os compósitos foram moldados por extrusão e injeção e avaliadas suas as propriedades morfológicas, térmicas e mecânicas. Os resultados de FTIR mostraram que o tratamento alcalino promoveu modificações na estrutura das fibras de curauá, comprovadas pela remoção da hemicelulose e da lignina, evidenciadas pela ausência das bandas típicas destes compostos. Nos compósitos com fibras de curauá tratadas com solução de NaOH na concentração de 5% apresentaram um aumento de 30% na resistência à flexão e 12% na resistência ao impacto, quando comparados aos compósitos com fibras sem tratamento. Estes resultados indicam que o tratamento alcalino promoveu uma melhoria na adesão das fibras na matriz, o que melhorou significativamente as propriedades mecânicas dos compósitos.

Compétences pour les PME de l'Amérique centrale dans l'économie ...

International Development Research Centre (IDRC) Digital Library (Canada)

... compétences nécessaires; b) des recherches pour comprendre les modèles sociaux ... Il existe un lien bien documenté entre les compétences nécessaires pour ... Bien que ces compétences ne soient pas nécessairement axées sur les TIC, ...

Characterization of Material from Wells 299-W10-35 (C7573) and 299-W14-74 (C7024)

International Nuclear Information System (INIS)

Tilton, Fred A.; Wellman, Dawn M.; Bovaird, Chase C.; Strandquist, Sara C.

2011-01-01

The objective of this work was to characterize material accumulating on wells 299-W10-35 (C7573) and 299-W14-74 (C7024) to determine the type of material (i.e., chemical or biological) and, if the material is biological, to identify the microorganisms present. Extraction and injection wells 299-W10-35 (C7573) and 299-W14-74 (C7024) possess unknown material attached to the well screens (Figure 1). Both wells are located on the Hanford Site. Well 299-W10-35 (C7573) is located west of the 218-W-3A dry waste burial ground, west of Dayton Avenue, and north of 23rd Street and has accumulated white material on the screen and in the sump. Well 299-W14-74 (C7024) is located south of 23rd Street and east of Beloit Avenue. There are two types of material: one is reddish/orange (hypothesized to be iron-utilizing bacterial colonies) and the other is white and may or may not be biological. CH2M HILL Plateau Remediation Company (CHPRC) is conducting onsite sampling for total organic carbon, calcium carbonate, and metals. Table 1 presents chemical data for the groundwater samples associated with these materials. The objective of this work was to characterize material accumulating on wells 299-W10-35 (C7573) and 299-W14-74 (C7024) to determine the type of material (i.e., chemical or biological), and if the material is biological, to identify the microorganisms present.

10 CFR 55.41 - Written examination: Operators.

Science.gov (United States)

2010-01-01

... licensed operator duties. The knowledge, skills, and abilities will be identified, in part, from learning... coolant chemistry, causes and effects of temperature, pressure and reactivity changes, effects of load...

Les compétences évaluatives des formateurs d'enseignants

OpenAIRE

Jorro , Anne

2005-01-01

Dans cette communication, je présenterai une recherche exploratoire conduite auprès de formateurs d'enseignants dont les missions d'accompagnement des professeurs - stagiaires supposent des compétences évaluatives. Or, les formateurs d'enseignants entrevoient quasi naturellement la nécessité de gagner des compétences analytiques sur l'activité observée. Ces professionnels recourent plus volontiers à des moments d'analyse de pratiques et déclarent éprouver des difficultés à investir l'évaluati...

Mass-Spectrometry Based Structure Identification of "Known-Unknowns" Using the EPA's CompTox Dashboard (ACS Spring National Meeting) 4 of 7

Science.gov (United States)

The CompTox Dashboard is a publicly accessible database provided by the National Center for Computational Toxicology at the US-EPA. The dashboard provides access to a database containing ~720,000 chemicals and integrates a number of our public-facing projects (e.g. ToxCast and Ex...

Test and evaluation plan for Project W-314 tank farm restoration and safe operations

International Nuclear Information System (INIS)

Hays, W.H.

1998-01-01

The ''Tank Farm Restoration and Safe Operations'' (TFRSO), Project W-314 will restore and/or upgrade existing Hanford Tank Farm facilities and systems to ensure that the Tank Farm infrastructure will be able to support near term TWRS Privatization's waste feed delivery and disposal system and continue safe management of tank waste. The capital improvements provided by this project will increase the margin of safety for Tank Farms operations, and will aid in aligning affected Tank Farm systems with compliance requirements from applicable state, Federal, and local regulations. Secondary benefits will be realized subsequent to project completion in the form of reduced equipment down-time, reduced health and safety risks to workers, reduced operating and maintenance costs, and minimization of radioactive and/or hazardous material releases to the environment. The original regulatory (e.g., Executive Orders, WACS, CFRS, permit requirements, required engineering standards, etc.) and institutional (e.g., DOE Orders, Hanford procedures, etc.) requirements for Project W-314 were extracted from the TWRS S/RIDs during the development of the Functions and Requirements (F and Rs). The entire family of requirements were then validated for TWRS and Project W-314. This information was contained in the RDD-100 database and used to establish the original CDR. The Project Hanford Management Contract (PHMC) team recognizes that safety, quality, and cost effectiveness in the Test and Evaluation (T and E) program is achieved through a planned systematic approach to T and E activities. It is to this end that the Test and Evaluation Plan (TEP) is created. The TEP for the TFRSO Project, was developed based on the guidance in HNF-IP-0842, and the Good Practice Guide GPG-FM-005, ''Test and Evaluation,'' which is derived from DOE Order 430.1, ''Life Cycle Asset Management.'' It describes the Test and Evaluation program for the TFRSO project starting with the definitive design phase and ending

CompTIA Security+ Review Guide Exam SY0-301

CERN Document Server

Stewart, James M

2011-01-01

Reinforce your preparation for CompTIA's new Security+ exam with this focused review tool Before you take CompTIA's new Security+ exam SY0-301, reinforce your learning with a thorough review and lots of practice. The new edition of this concise guide helps you do just that. It covers all six domains of exam SY0-301, all exam objectives, and includes a helpful "Exam Essentials" section after each domain to help you zero in on what you need to know for the exam. A companion CD offers additional study tools, including two complete practice exams, over a hundred electronic flashcards, and more.Rev

Supplemental design requirements document enhanced radioactive and mixed waste storage Phase V Project W-112

International Nuclear Information System (INIS)

Ocampo, V.P.; Boothe, G.F.; Greager, T.M.; Johnson, K.D.; Kooiker, S.L.; Martin, J.D.

1994-11-01

This document provides additional and supplemental information to WHC-SD-W112-FDC-001, Project W-112 for radioactive and mixed waste storage. It provides additional requirements for the design and summarizes Westinghouse Hanford Company key design guidance and establishes the technical baseline agreements to be used for definitive design of the Project W-112 facilities

Project W-420 Stack Monitoring system upgrades conceptual design report

International Nuclear Information System (INIS)

TUCK, J.A.

1998-01-01

This document describes the scope, justification, conceptual design, and performance of Project W-420 stack monitoring system upgrades on six NESHAP-designated, Hanford Tank Farms ventilation exhaust stacks

Project W-420 Stack Monitoring system upgrades conceptual design report

Energy Technology Data Exchange (ETDEWEB)

TUCK, J.A.

1998-11-06

This document describes the scope, justification, conceptual design, and performance of Project W-420 stack monitoring system upgrades on six NESHAP-designated, Hanford Tank Farms ventilation exhaust stacks.

Baseline comparison report for Project W-058, Replacement of the cross-site transfer system. Revision 1

International Nuclear Information System (INIS)

Mendoza, D.P.

1995-01-01

This BCR compares the Project W-058 Functional Design Criteria with the Project W-058 Preliminary Design Requirements Document, and identifies the differences between the two documents in the mission definition, project requirements, system functions, and interfaces. Impacts these differences have on current project design are also discussed

Research on industrial 10kW CO2 laser achieves major breakthrough

Science.gov (United States)

1991-01-01

The industrial 10kW CO2 laser is one of the items which the industrially developed nations are competing to develop. This laser is capable of continuous output power of over 10kW and can operate continuously for more than 6 hours. The 10kW CO2 laser developed as a key task of China's 7th Five-Year Plan and all its technological targets such as output power, electrooptical conversion efficiency and primary charging continuous operating time, have reached the level of world advancement, allowing China to enter the ranks of international advancement in the area of laser technology. The industrial 10kW CO2 laser can have wide application in such areas of industry as heat treating, machining, welding and surface treatment in industries such as steel, automobiles, ship building and aircraft manufacturing. For instance, using the high-efficiency laser beams of this 10kW laser to treat rollers, fan blades and automotive cylinder blocks can increase the life of these parts and produce large economic benefits. At present, industrial tests of gear welding is already being done on this 10kW laser.

Electric propulsion options for 10 kW class earth space missions

Science.gov (United States)

Patterson, M. J.; Curran, Francis M.

1989-01-01

Five and 10 kW ion and arcjet propulsion system options for a near-term space demonstration experiment have been evaluated. Analyses were conducted to determine first-order propulsion system performance and system component mass estimates. Overall mission performance of the electric propulsion systems was quantified in terms of the maximum thrusting time, total impulse, and velocity increment capability available when integrated onto a generic spacecraft under fixed mission model assumptions. Maximum available thrusting times for the ion-propelled spacecraft options, launched on a DELTA II 6920 vehicle, range from approximately 8,600 hours for a 4-engine 10 kW system to more than 29,600 hours for a single-engine 5 kW system. Maximum total impulse values and maximum delta-v's range from 1.2x10(7) to 2.1x10(7) N-s, and 3550 to 6200 m/s, respectively. Maximum available thrusting times for the arcjet propelled spacecraft launched on the DELTA II 6920 vehicle range from approximately 528 hours for the 6-engine 10 kW hydrazine system to 2328 hours for the single-engine 5 kW system. Maximum total impulse values and maximum delta-v's range from 2.2x10(6) to 3.6x10(6) N-s, and approximately 662 to 1072 m/s, respectively.

Electric Propulsion Options for 10 kW Class Earth-Space Missions

Science.gov (United States)

Patterson, M. J.; Curran, Francis M.

1989-01-01

Five and 10 kW ion and arcjet propulsion system options for a near-term space demonstration experiment were evaluated. Analyses were conducted to determine first-order propulsion system performance and system component mass estimates. Overall mission performance of the electric propulsion systems was quantified in terms of the maximum thrusting time, total impulse, and velocity increment capability available when integrated onto a generic spacecraft under fixed mission model assumptions. Maximum available thrusting times for the ion-propelled spacecraft options, launched on a DELTA 2 6920 vehicle, range from approximately 8,600 hours for a 4-engine 10 kW system to more than 29,600 hours for a single-engine 5 kW system. Maximum total impulse values and maximum delta-v's range from 1.2x10 (exp 7) to 2.1x10 (exp 7) N-s, and 3550 to 6200 m/s, respectively. Maximum available thrusting times for the arcjet propelled spacecraft launched on the DELTA 2 6920 vehicle range from approximately 528 hours for the 6-engine 10 kW hydrazine system to 2328 hours for the single-engine 5 kW system. Maximum total impulse values and maximum delta-v's range from 2.2x10 (exp 6) to 3.6x10 (exp 6) N-s, and approximately 662 to 1072 m/s, respectively.

Real-time prediction of Physicochemical and Toxicological Endpoints Using the Web-based CompTox Chemistry Dashboard (ACS Fall meeting) 10 of 12

Science.gov (United States)

The EPA CompTox Chemistry Dashboard developed by the National Center for Computational Toxicology (NCCT) provides access to data for ~750,000 chemical substances. The data include experimental and predicted data for physicochemical, environmental fate and transport and toxicologi...

A new Brief computerized cognitive screening battery (CompCogs for early diagnosis of Alzheimer's disease

Directory of Open Access Journals (Sweden)

Helenice Charchat Fichman

Full Text Available Abstract Screening tests for early diagnosis of dementia are of great clinical relevance. The ideal test set must be brief and reliable, and should probe cognitive components impaired in Alzheimer's disease (AD. Objectives: To develop a new Computerized Cognitive Screening test (CompCogs, and to investigate its validity for the early diagnosis of AD, and evaluate its heuristic value in understanding the processing of information in AD. Methods: The computerized neuropsychological performance battery, originally including six tests, was applied in forty seven patients with probable mild AD and 97 controls matched for age and education. This computerized neuropsychological test battery, developed with MEL Professional, allows control of timing and order of stimuli presentation, as well as recording of response type and latency. A brief-screening version, CompCogs, was selected using the most discriminative neuropsychological test variables derived from logistic regression analysis. Full battery administration lasted about 40 minutes, while the CompCogs took only 15 minutes. Results: CompCogs included the Face test (correct response and Word and Forms with Short term memory tests (reaction time. CompCogs presented 91.8% sensitivity and 93.6% specificity for the diagnosis of AD using ROC analyses of AD diagnosis probability derived by logistic regression. Conclusions: CompCogs showed high validity for AD early diagnosis and, therefore, may be a useful alternative screening instrument.

Cloud essentials CompTIA authorized courseware for exam CLO-001

CERN Document Server

Hausman, Kirk; Sampaio, Telmo

2013-01-01

CompTIA-Authorized courseware for the Cloud Essentials Exam (CLO-001) What better way to get up to speed on cloud computing than with this new book in the popular Sybex Essentials series? Cloud Essentials covers the basics of cloud computing and its place in the modern enterprise. Explore public and private clouds; contrast the ""as a service"" models for PaaS, SaaS, IaaS, or XaaS platforms; plan security; and more. In addition, the book covers the exam objectives for the both the CompTIA Cloud Essentials (Exam CLO-001) exam and the EXIN Cloud Computing Foundation (EX0-1

Immediate loading versus immediate provisionalization of maxillary single-tooth replacements: a prospective randomized study with BioComp implants

NARCIS (Netherlands)

Lindeboom, Jerome A.; Frenken, Joost W.; Dubois, Leander; Frank, Michael; Abbink, Ingmar; Kroon, Frans H.

2006-01-01

PURPOSE: The aim of this prospective randomized study was to evaluate the clinical outcome of immediately loaded solid plasma sprayed (TPS) BioComp (BioComp Industries BV, Vught, The Netherlands) implants versus immediate provisionalized but non-loaded BioComp implants in the anterior and premolar

Ingénierie des compétences et scénarisation pédagogique

Directory of Open Access Journals (Sweden)

Josianne Basque

2007-01-01

Full Text Available Cet article décrit un processus d’ingénierie éducative orienté compétences d’une activité d’autoévaluation et son intégration à un scénario pédagogique de cours à distance. Cette description est documentée par deux cas d’application dans un contexte de formation universitaire à distance. Le travail d’ingénierie utilise une approche en autogestion des compétences pour concevoir l’activité d’autoévaluation et l’instrumentaliser avec l’outil logiciel web d’autodiagnostic des compétences, appelé Compétences+. Cet acte d’ingénierie pédagogique porte l’attention de l’enseignant-concepteur sur une démarche centrée sur l’apprentissage dans une perspective d’autogestion des connaissances et de sa validation dans un usage en contexte isomorphe à une situation professionnelle réelle.

Project W-049H collection system Acceptance Test Procedure

International Nuclear Information System (INIS)

Carrigan, M.C.

1994-01-01

The purpose of this Acceptance Test Procedure (ATP) for the Project W-049H, Treated Effluent Disposal Facility, is to verify that the collection system equipment installed as Pump Station No. 1 (225-W) and Pump Station No. 2 (225-E) have been installed in accordance with the design documents and function as required by the project criteria. This will be a wet test with potable water being introduced into the pump pits to test for leakage. Potable water will also be employed in the testing of the pumps and related mechanical equipment. All Instrument and Control equipment related to the pump stations will be checked electronically with simulated inputs/outputs when actual input/output signals are unavailable. Water from Pump Station 1 will be moved through the TEDF piping system and discharged into the disposal ponds. This will check the proper function of the air/vac valves not tested during construction, and the automated samplers

Project W-320, 241-C-106 sluicing: Civil/structural calculations. Volume 6

Energy Technology Data Exchange (ETDEWEB)

Bailey, J.W.

1998-07-24

This supporting document has been prepared to make the FDNW calculations for Project W-320 readily retrievable. The purpose of this calculation is to conservatively estimate the weight of equipment and structures being added over Tank 241-C-106 as a result of Project W-320 and combine these weights with the estimated weights of existing structures and equipment as calculated in Attachment 1. The combined weights will be compared to the allowable live load limit to provide a preliminary assessment of loading conditions above Tank 241-C-106.

Project W-314 specific test and evaluation plan 241-AN-B valve pit

International Nuclear Information System (INIS)

Hays, W.H.

1998-01-01

The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made to the 241-AN-B Valve Pit by the W-314 Project. The STEP develops the outline for test procedures that verify the system's performance to the established Project design criteria. The STEP is a lower tier document based on the W-314 Test and Evaluation Plan (TEP)

Project management plan for Project W-320, Tank 241-C-106 sluicing. Revision 2

Energy Technology Data Exchange (ETDEWEB)

Phillips, D.R.

1994-07-01

A major mission of the US Department of Energy (DOE) is the permanent disposal of Hanford Site defense wastes by utilizing safe, environmentally acceptable, and cost-effective disposal methods that meet applicable regulations. The Tank Waste Remediation System (TWRS) Program was established at the Hanford Site to manage and control activities specific to the remediation of safety watch list tanks, including high-heat-producing tanks, and for the ultimate characterization, retrieval, pretreatment, and disposal of the low- and high-level fractions of the tank waste. Project W-320, Tank 241-C-106 Sluicing, provides the methodology, equipment, utilities, and facilities necessary for retrieving the high-heat waste from single-shell tank (SST) 24-C-106. Project W-320 is a fiscal year (FY) 1993 expense-funded major project, and has a design life of 2 years. Retrieval of the waste in tank 241-C-106 will be accomplished through mobilization of the sludge into a pumpable slurry using past-practice sluicing. The waste is then transferred directly to a double-shell tank for interim storage, subsequent pretreatment, and eventual disposal. A detailed description of the management organization and responsibilities of all participants is presented in this document.

Project management plan for Project W-320, Tank 241-C-106 sluicing. Revision 2

International Nuclear Information System (INIS)

Phillips, D.R.

1994-07-01

A major mission of the US Department of Energy (DOE) is the permanent disposal of Hanford Site defense wastes by utilizing safe, environmentally acceptable, and cost-effective disposal methods that meet applicable regulations. The Tank Waste Remediation System (TWRS) Program was established at the Hanford Site to manage and control activities specific to the remediation of safety watch list tanks, including high-heat-producing tanks, and for the ultimate characterization, retrieval, pretreatment, and disposal of the low- and high-level fractions of the tank waste. Project W-320, Tank 241-C-106 Sluicing, provides the methodology, equipment, utilities, and facilities necessary for retrieving the high-heat waste from single-shell tank (SST) 24-C-106. Project W-320 is a fiscal year (FY) 1993 expense-funded major project, and has a design life of 2 years. Retrieval of the waste in tank 241-C-106 will be accomplished through mobilization of the sludge into a pumpable slurry using past-practice sluicing. The waste is then transferred directly to a double-shell tank for interim storage, subsequent pretreatment, and eventual disposal. A detailed description of the management organization and responsibilities of all participants is presented in this document

Higher dimensional uniformisation and W-geometry

International Nuclear Information System (INIS)

Govindarajan, S.

1995-01-01

We formulate the uniformisation problem underlying the geometry of W n -gravity using the differential equation approach to W-algebras. We construct W n -space (analogous to superspace in supersymmetry) as an (n-1)-dimensional complex manifold using isomonodromic deformations of linear differential equations. The W n -manifold is obtained by the quotient of a Fuchsian subgroup of PSL(n,R) which acts properly discontinuously on a simply connected domain in bfCP n-1 . The requirement that a deformation be isomonodromic furnishes relations which enable one to convert non-linear W-diffeomorphisms to (linear) diffeomorphisms on the W n -manifold. We discuss how the Teichmueller spaces introduced by Hitchin can then be interpreted as the space of complex structures or the space of projective structures with real holonomy on the W n -manifold. The projective structures are characterised by Halphen invariants which are appropriate generalisations of the Schwarzian. This construction will work for all ''generic'' W-algebras. (orig.)

Project W-320, tank 241-C-106 sluicing acceptance for beneficial use

International Nuclear Information System (INIS)

BAILEY, J.W.

1999-01-01

The purpose of this document is to identify the Project W-320 Chiller Documentation required to be turned over from the Projects Organization to Tank Farm Operations as part of the acceptance of the new equipment for beneficial use

W-320 Department of Health documentation

International Nuclear Information System (INIS)

Bailey, J.W.

1998-01-01

The purpose of this document is to gather information required to show that Project W-320 is in compliance with Washington State Department of Health requirements as specified in Radioactive Air Emissions Notice of Construction Project W-320, Tank 241-C-106 Sluicing, DOE/RL-95-45. Specifically, that W-320 is in compliance with ASME N509-1989 (Nuclear Power Plant Air-Cleaning Units and Components) and ASME N5 10-1989 (Testing of Nuclear Air Treatment Systems) for the 296-C-006 exhaust system

W-320 Department of Health documentation

Energy Technology Data Exchange (ETDEWEB)

Bailey, J.W.

1998-08-07

The purpose of this document is to gather information required to show that Project W-320 is in compliance with Washington State Department of Health requirements as specified in Radioactive Air Emissions Notice of Construction Project W-320, Tank 241-C-106 Sluicing, DOE/RL-95-45. Specifically, that W-320 is in compliance with ASME N509-1989 (Nuclear Power Plant Air-Cleaning Units and Components) and ASME N5 10-1989 (Testing of Nuclear Air Treatment Systems) for the 296-C-006 exhaust system.

Project W-314 Polyurea Special Protective Coating (SPC) Test Report Chemical Compatibility and Physical Characteristics Testing

International Nuclear Information System (INIS)

MAUSER, R.W.

2001-01-01

This Engineering Test report outlines the results obtained from testing polyurea on its decon factor, tank waste compatibility, and adhesion strength when subjected to a high level of gamma radiation. This report is used in conjunction with RPP-7187 Project W-314 Pit Coatings Repair Requirements Analysis, to document the fact polyurea meets the project W-314 requirements contained in HNF-SD-W314-PDS-005 and is therefore an acceptable SPC for use in W-314 pit refurbishments

Project W-320, 241-C-106 sluicing: Construction specification W-320-C2

International Nuclear Information System (INIS)

Bailey, J.W.

1998-01-01

This supporting document has been prepared to make the construction specifications for Project W-320 readily available. Project W-320, Waste Retrieval Sluicing System (WRSS), specification is for procurement, fabrication and installation of equipment at the C Tank Farm, including Operator Station and some equipment just outside the C Tank Farm fence, necessary to support the sluicing operation. Work consists of furnishing labor, equipment, and materials to provide the means to procure materials and equipment, fabricate items, excavate and place concrete, and install equipment, piping, wiring, and structures in accordance with the Contract Documents. Major work elements include: Excavation for process and fire protection piping, electrical conduit trenches, and foundations for small structures; Placement of concrete cover blocks, foundations, and equipment pads; Procurement and installation of double walled piping, electrical conduit, fire and raw water piping, chilled water piping, and electrical cable; Procurement and installation of above-ground ventilation system piping between the (HVAC) Process building and Tank C-106; Core drill existing concrete; Furnish and installation of electrical distribution equipment; Installation of the concrete foundation, and assembly installation of the two Seismic Shutdown Systems with Environmental Enclosures; Fabrication and installation of in-pit pipe jumpers, including related valves, instruments and wiring; and Installation of a vertical submersible pump, horizontal booster pump, and winch assembly into tank access riser pits

Project W-320, 241-C-106 sluicing: Construction specification W-320-C2

Energy Technology Data Exchange (ETDEWEB)

Bailey, J.W.

1998-07-20

This supporting document has been prepared to make the construction specifications for Project W-320 readily available. Project W-320, Waste Retrieval Sluicing System (WRSS), specification is for procurement, fabrication and installation of equipment at the C Tank Farm, including Operator Station and some equipment just outside the C Tank Farm fence, necessary to support the sluicing operation. Work consists of furnishing labor, equipment, and materials to provide the means to procure materials and equipment, fabricate items, excavate and place concrete, and install equipment, piping, wiring, and structures in accordance with the Contract Documents. Major work elements include: Excavation for process and fire protection piping, electrical conduit trenches, and foundations for small structures; Placement of concrete cover blocks, foundations, and equipment pads; Procurement and installation of double walled piping, electrical conduit, fire and raw water piping, chilled water piping, and electrical cable; Procurement and installation of above-ground ventilation system piping between the (HVAC) Process building and Tank C-106; Core drill existing concrete; Furnish and installation of electrical distribution equipment; Installation of the concrete foundation, and assembly installation of the two Seismic Shutdown Systems with Environmental Enclosures; Fabrication and installation of in-pit pipe jumpers, including related valves, instruments and wiring; and Installation of a vertical submersible pump, horizontal booster pump, and winch assembly into tank access riser pits.

Project W-320, 241-C-106 sluicing: Construction specification W-320-C6

International Nuclear Information System (INIS)

Bailey, J.W.

1998-01-01

This supporting document has been prepared to make the construction specifications for Project W-320 readily available. Project W-320, Waste Retrieval Sluicing System (WRSS), specification is for procurement, fabrication and installation of equipment at the C Tank Farm, including Operator Station and some equipment just outside the C Tank Farm fence, necessary to support the sluicing operation. Work consists of furnishing labor, equipment, and materials to provide the means to procure materials and equipment, fabricate items, excavate and place concrete, and install equipment, piping, wiring, and structures in accordance with the Contract Documents. Major work elements include: Excavation for process and fire protection piping, electrical conduit trenches, and foundations for small structures; Placement of concrete cover blocks, foundations, and equipment pads; Procurement and installation of double walled piping, electrical conduit, fire and raw water piping, chilled water piping, and electrical cable; Procurement and installation of above-ground ventilation system piping between the (HVAC) Process building and Tank C-106; Core drill existing concrete; Furnish and installation of electrical distribution equipment; Installation of the concrete foundation, and assembly installation of the two Seismic Shutdown Systems with Environmental Enclosures; Fabrication and installation of in-pit pipe jumpers, including related valves, instruments and wiring; and Installation of a vertical submersible pump, horizontal booster pump, and winch assembly into tank access riser pits

Project W-320, 241-C-106 sluicing: Construction specification W-320-C5

International Nuclear Information System (INIS)

Bailey, J.W.

1998-01-01

This supporting document has been prepared to make the construction specifications for Project W-320 readily available. Project W-320, Waste Retrieval Sluicing System (WRSS), specification is for procurement, fabrication and installation of equipment at the C Tank Farm, including Operator Station and some equipment just outside the C Tank Farm fence, necessary to support the sluicing operation. Work consists of furnishing labor, equipment, and materials to provide the means to procure materials and equipment, fabricate items, excavate and place concrete, and install equipment, piping, wiring, and structures in accordance with the Contract Documents. Major work elements include: Excavation for process and fire protection piping, electrical conduit trenches, and foundations for small structures; Placement of concrete cover blocks, foundations, and equipment pads; Procurement and installation of double walled piping, electrical conduit, fire and raw water piping, chilled water piping, and electrical cable; Procurement and installation of above-ground ventilation system piping between the (HVAC) Process building and Tank C-106; Core drill existing concrete; Furnish and installation of electrical distribution equipment; Installation of the concrete foundation, and assembly installation of the two Seismic Shutdown Systems with Environmental Enclosures; Fabrication and installation of in-pit pipe jumpers, including related valves, instruments and wiring; and Installation of a vertical submersible pump, horizontal booster pump, and winch assembly into tank access riser pits

Project W-320, 241-C-106 sluicing: Construction specification W-320-C7

International Nuclear Information System (INIS)

Bailey, J.W.

1998-01-01

This supporting document has been prepared to make the construction specifications for Project W-320 readily available. Project W-320, Waste Retrieval Sluicing System (WRSS), specification is for procurement, fabrication and installation of equipment at the C Tank Farm, including Operator Station and some equipment just outside the C Tank Farm fence, necessary to support the sluicing operation. Work consists of furnishing labor, equipment, and materials to provide the means to procure materials and equipment, fabricate items, excavate and place concrete, and install equipment, piping, wiring, and structures in accordance with the Contract Documents. Major work elements include: Excavation for process and fire protection piping, electrical conduit trenches, and foundations for small structures; Placement of concrete cover blocks, foundations, and equipment pads; Procurement and installation of double walled piping, electrical conduit, fire and raw water piping, chilled water piping, and electrical cable; Procurement and installation of above-ground ventilation system piping between the (HVAC) Process building and Tank C-106; Core drill existing concrete; Furnish and installation of electrical distribution equipment; Installation of the concrete foundation, and assembly installation of the two Seismic Shutdown Systems with Environmental Enclosures; Fabrication and installation of in-pit pipe jumpers, including related valves, instruments and wiring; and Installation of a vertical submersible pump, horizontal booster pump, and winch assembly into tank access riser pits

Project W-320, 241-C-106 sluicing: Construction specification W-320-C5

Energy Technology Data Exchange (ETDEWEB)

Bailey, J.W.

1998-07-20

This supporting document has been prepared to make the construction specifications for Project W-320 readily available. Project W-320, Waste Retrieval Sluicing System (WRSS), specification is for procurement, fabrication and installation of equipment at the C Tank Farm, including Operator Station and some equipment just outside the C Tank Farm fence, necessary to support the sluicing operation. Work consists of furnishing labor, equipment, and materials to provide the means to procure materials and equipment, fabricate items, excavate and place concrete, and install equipment, piping, wiring, and structures in accordance with the Contract Documents. Major work elements include: Excavation for process and fire protection piping, electrical conduit trenches, and foundations for small structures; Placement of concrete cover blocks, foundations, and equipment pads; Procurement and installation of double walled piping, electrical conduit, fire and raw water piping, chilled water piping, and electrical cable; Procurement and installation of above-ground ventilation system piping between the (HVAC) Process building and Tank C-106; Core drill existing concrete; Furnish and installation of electrical distribution equipment; Installation of the concrete foundation, and assembly installation of the two Seismic Shutdown Systems with Environmental Enclosures; Fabrication and installation of in-pit pipe jumpers, including related valves, instruments and wiring; and Installation of a vertical submersible pump, horizontal booster pump, and winch assembly into tank access riser pits.

Project W-320, 241-C-106 sluicing: Construction specification W-320-C7

Energy Technology Data Exchange (ETDEWEB)

Bailey, J.W.

1998-07-20

This supporting document has been prepared to make the construction specifications for Project W-320 readily available. Project W-320, Waste Retrieval Sluicing System (WRSS), specification is for procurement, fabrication and installation of equipment at the C Tank Farm, including Operator Station and some equipment just outside the C Tank Farm fence, necessary to support the sluicing operation. Work consists of furnishing labor, equipment, and materials to provide the means to procure materials and equipment, fabricate items, excavate and place concrete, and install equipment, piping, wiring, and structures in accordance with the Contract Documents. Major work elements include: Excavation for process and fire protection piping, electrical conduit trenches, and foundations for small structures; Placement of concrete cover blocks, foundations, and equipment pads; Procurement and installation of double walled piping, electrical conduit, fire and raw water piping, chilled water piping, and electrical cable; Procurement and installation of above-ground ventilation system piping between the (HVAC) Process building and Tank C-106; Core drill existing concrete; Furnish and installation of electrical distribution equipment; Installation of the concrete foundation, and assembly installation of the two Seismic Shutdown Systems with Environmental Enclosures; Fabrication and installation of in-pit pipe jumpers, including related valves, instruments and wiring; and Installation of a vertical submersible pump, horizontal booster pump, and winch assembly into tank access riser pits.

Project W-320, 241-C-106 sluicing: Construction specification W-320-C6

Energy Technology Data Exchange (ETDEWEB)

Bailey, J.W.

1998-07-20

This supporting document has been prepared to make the construction specifications for Project W-320 readily available. Project W-320, Waste Retrieval Sluicing System (WRSS), specification is for procurement, fabrication and installation of equipment at the C Tank Farm, including Operator Station and some equipment just outside the C Tank Farm fence, necessary to support the sluicing operation. Work consists of furnishing labor, equipment, and materials to provide the means to procure materials and equipment, fabricate items, excavate and place concrete, and install equipment, piping, wiring, and structures in accordance with the Contract Documents. Major work elements include: Excavation for process and fire protection piping, electrical conduit trenches, and foundations for small structures; Placement of concrete cover blocks, foundations, and equipment pads; Procurement and installation of double walled piping, electrical conduit, fire and raw water piping, chilled water piping, and electrical cable; Procurement and installation of above-ground ventilation system piping between the (HVAC) Process building and Tank C-106; Core drill existing concrete; Furnish and installation of electrical distribution equipment; Installation of the concrete foundation, and assembly installation of the two Seismic Shutdown Systems with Environmental Enclosures; Fabrication and installation of in-pit pipe jumpers, including related valves, instruments and wiring; and Installation of a vertical submersible pump, horizontal booster pump, and winch assembly into tank access riser pits.

Effects of W on microstructure of as-cast 28 wt.%Cr–2.6 wt.%C–(0–10)wt.%W irons

Energy Technology Data Exchange (ETDEWEB)

Imurai, S. [Department of Physics and Materials Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Thanachayanont, C.; Pearce, J.T.H. [National Metal and Materials Technology Center, Pathumthani 12120 (Thailand); Tsuda, K. [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Sendai 980-8577 (Japan); Chairuangsri, T., E-mail: tchairuangsri@gmail.com [Department of Industrial Chemistry, Chiang Mai University, Chiang Mai 50200 (Thailand)

2015-01-15

Microstructures of as-cast 28 wt.%Cr–2.6 wt.%C irons containing (0–10)wt.%W with the Cr/C ratio about 10 were studied and related to their hardness. The experimental irons were cast into dry sand molds. Microstructural investigation was performed by light microscopy, X-ray diffractometry, scanning electron microscopy, transmission electron microscopy and energy-dispersive X-ray spectrometry. It was found that the irons with 1 to 10 wt.%W addition was hypereutectic containing large primary M{sub 7}C{sub 3}, whereas the reference iron without W addition was hypoeutectic. The matrix in all irons was austenite, partly transformed to martensite during cooling. The volume fractions of primary M{sub 7}C{sub 3} and the total carbides increased, but that of eutectic carbides decreased with increasing the W content of the irons. W addition promoted the formation of W-rich M{sub 7}C{sub 3}, M{sub 6}C and M{sub 23}C{sub 6}. At about 4 wt.%W, two eutectic carbides including M{sub 7}C{sub 3} and M{sub 6}C were observed together with primary M{sub 7}C{sub 3}. At 10 wt.%W, multiple carbides including primary M{sub 7}C{sub 3}, fish-bone M{sub 23}C{sub 6}, and M{sub 6}C were observed. M{sub x}C where x = 3 or less has not been found due possibly to the high M/C ratio in the studied irons. W distribution to all carbides has been determined increasing from ca. 0.3 to 0.8 in mass fraction as the W content in the irons was increased. W addition led to an increase in Vickers macro-hardness of the irons up to 671 kgf/(mm){sup 2} (HV30/15) obtained from the iron with 10 wt.%W. The formation of primary M{sub 7}C{sub 3} and aggregates of M{sub 6}C and M{sub 23}C{sub 6} were the main reasons for hardness increase, indicating potentially improved wear performance of the as-cast irons with W addition. - Highlights: • W addition at 1 up to 10 wt.%W to Fe–28Cr–2.6C produced “hypereutectic” structure. • W addition promoted the formation of W-rich M{sub 7}C{sub 3}, M{sub 6}C and M

Project W-320, backup: 1000 CFM portable exhausters acceptance for beneficial use

International Nuclear Information System (INIS)

Nelson, O.D.

1998-01-01

This document is to identify the Project W-320 1000 CFM portable exhauster documentation required to be turned over from the Projects Organization to the Tank Farm Operations as part of the acceptance of the 1000 CFM portable exhausters for beneficial use

SyGuS-Comp 2016: Results and Analysis

Directory of Open Access Journals (Sweden)

Rajeev Alur

2016-11-01

Full Text Available Syntax-Guided Synthesis (SyGuS is the computational problem of finding an implementation f that meets both a semantic constraint given by a logical formula φ in a background theory T, and a syntactic constraint given by a grammar G, which specifies the allowed set of candidate implementations. Such a synthesis problem can be formally defined in SyGuS-IF, a language that is built on top of SMT-LIB. The Syntax-Guided Synthesis Competition (SyGuS-Comp is an effort to facilitate, bring together and accelerate research and development of efficient solvers for SyGuS by providing a platform for evaluating different synthesis techniques on a comprehensive set of benchmarks. In this year's competition we added a new track devoted to programming by examples. This track consisted of two categories, one using the theory of bit-vectors and one using the theory of strings. This paper presents and analyses the results of SyGuS-Comp'16.

Hydroxychloroquine induces inhibition of collagen type II and oligomeric matrix protein COMP expression in chondrocytes

Directory of Open Access Journals (Sweden)

Tao Li

2016-06-01

Full Text Available The aim of this study was to investigate the effect of hydroxychloroquine on the level of collagen type II and oligomeric matrix protein COMP expression in chondrocytes of knee osteoarthritis. The rate of growth in cartilage cells was analyzed using MTT assay whereas the Col-2 and COMP expression levels were detected by RT-PCR and Western blotting analyses. For the determination of MMP-13 expression, ELISA test was used. The results revealed no significant change in the rate of cartilage cell proliferation in hydroxychloroquine-treated compared to untreated cells. Hydroxychloro-quine treatment exhibited concentration- and time-dependent effect on the inhibition of collagen type II and COMP expression in chondrocytes. However, its treatment caused a significant enhancement in the expression levels of MMP-13 compared to the untreated cells. Therefore, hydroxychloro-quine promotes expression of MMP-13 and reduces collagen type II and COMP expression levels in chondrocytes without any significant change in the growth of cells.

Informatisation de la gestion des compétences : évaluation de la démarche dans une collectivité territoriale

OpenAIRE

Bachelet, Catherine; Galey, Béatrice

2013-01-01

Notion répandue mais difficile à cerner, la gestion des compétences peut être définie comme une instrumentation sur laquelle les acteurs professionnels de la GRH se fondent pour instruire leurs décisions de gestion (Gilbert, 2003). Constituée d'un « ensemble de pratiques visant à acquérir, stimuler et réguler les compétences des salariés » (Defélix et Retour, 2003), elle permet d'améliorer l'adéquation entre les compétences nécessaires et les compétences disponibles, pour optimiser la compéti...

Preliminary Design Requirements Document for Project W-314

Energy Technology Data Exchange (ETDEWEB)

MCGREW, D.L.

2000-04-27

This document sets forth functional requirements, performance requirements, and design constraints for the tank farm systems elements identified in Section 3.1 of this document. These requirements shall be used to develop the Design Requirements Baseline for those system elements. System Overview--The tank farm system at Hanford Site currently consists of 149 single shell tanks and 28 double shell tanks with associated facilities and equipment, located in 18 separate groupings. Each grouping is known as a tank farm. They are located in the areas designated as 200 West and 200 East. Table 1-1 shows the number of tanks in each farm. The farms are connected together through a transfer system consisting of piping, diversion boxes, Double Contained Receiver Tanks (DCRT) and other miscellaneous facilities and elements. The tank farm system also connects to a series of processing plants which generate radioactive and hazardous wastes. The primary functions of the tank farm system are to store, transfer, concentrate, and characterize radioactive and hazardous waste generated at Hanford, until the waste can be safely retrieved, processed and dispositioned. The systems provided by Project W-314 support the store and transfer waste functions. The system elements to be upgraded by Project W-314 are identified in Section 3.1.

Preliminary Design Requirements Document for Project W-314

International Nuclear Information System (INIS)

MCGREW, D.L.

2000-01-01

This document sets forth functional requirements, performance requirements, and design constraints for the tank farm systems elements identified in Section 3.1 of this document. These requirements shall be used to develop the Design Requirements Baseline for those system elements. System Overview--The tank farm system at Hanford Site currently consists of 149 single shell tanks and 28 double shell tanks with associated facilities and equipment, located in 18 separate groupings. Each grouping is known as a tank farm. They are located in the areas designated as 200 West and 200 East. Table 1-1 shows the number of tanks in each farm. The farms are connected together through a transfer system consisting of piping, diversion boxes, Double Contained Receiver Tanks (DCRT) and other miscellaneous facilities and elements. The tank farm system also connects to a series of processing plants which generate radioactive and hazardous wastes. The primary functions of the tank farm system are to store, transfer, concentrate, and characterize radioactive and hazardous waste generated at Hanford, until the waste can be safely retrieved, processed and dispositioned. The systems provided by Project W-314 support the store and transfer waste functions. The system elements to be upgraded by Project W-314 are identified in Section 3.1

Project W-320, 241-C-106 sluicing: Piping calculations. Volume 8

International Nuclear Information System (INIS)

Bailey, J.W.

1998-01-01

This supporting document has been prepared to make the FDNW calculations for Project W-320 readily retrievable. The objective of this calculation is to perform the hydraulic analysis on the slurry line and the supernate line for W-320. This calculation will use the As-Built conditions of the slurry line and the supernate line. Booster Pump Curves vs System Curves shall be generated for the supernate system and the slurry system

Recommendation on changing interfaces of W-058 and W-236A

International Nuclear Information System (INIS)

Light, J.M.

1994-01-01

This position paper recommends changes to improve the interface between the Cross-Site Transfer System (Project W-058) and the Multi-Function Waste Tank Facility (Project W-236A) to handle planned waste retrieval and storage operations. Appendix A includes cost estimates and schedule impacts for each project. The cost estimates, schedule impacts, and this position paper will be the basis for writing a change request to formally implement these changes on Project W-236A and Project W-058/W-028. Recommendations are made on pipeline rerouting, pump and configuration, and flushing configuration

Conceptual design report, 219-S secondary containment upgrade, Project W-178

International Nuclear Information System (INIS)

Beyer, J.J.

1993-05-01

The 219-S Facility is located in the 200-West Area on the Hanford Site and was constructed in 1951. The facility receives and treats liquid, low-level mixed waste from the 222-S Laboratory prior to transfer of that waste to the SY Tank Farm. The 219-S Facility consists of Cell A containing Tanks 101 and 102 and Cell B containing Tank 103 and a spare space. Project W-178 will modify the 219-S Facility to bring it into compliance with the tank system standards in WAC 173-303-640. The secondary containment upgrade will consist of a stainless steel cell liner in both Cell A and the spare space in Cell B. Additionally, Cell B will be modified by taking Tank 103 out of service and installing a new tank: Tank 104. The construction work will be accomplished in phases to minimize service interruption to the 222-S Laboratory. The proposed design and construction method is the most cost effective of four alternatives evaluated during a value engineering session. Project W-178 is a fiscal year 1995 Line Item. Total estimated construction costs of the project are $2,600,000; other project costs are $710,000. The total project cost is $3,300,000

Final Scientific/Technical Report, USDOE Award DE-FG-02ER54684, Recipient: CompX, Project Title: Fokker-Planck/Ray Tracing for Electron Bernstein and Fast Wave Modeling in Support of NSTX

International Nuclear Information System (INIS)

Harvey, R.W.

2009-01-01

This DOE grant supported fusion energy research, a potential long-term solution to the world's energy needs. Magnetic fusion, exemplified by confinement of very hot ionized gases, i.e., plasmas, in donut-shaped tokamak vessels is a leading approach for this energy source. Thus far, a mixture of hydrogen isotopes has produced 10's of megawatts of fusion power for seconds in a tokamak reactor at Princeton Plasma Physics Laboratory in New Jersey. The research grant under consideration, ER54684, uses computer models to aid in understanding and projecting efficacy of heating and current drive sources in the National Spherical Torus Experiment, a tokamak variant, at PPPL. The NSTX experiment explores the physics of very tight aspect ratio, almost spherical tokamaks, aiming at producing steady-state fusion plasmas. The current drive is an integral part of the steady-state concept, maintaining the magnetic geometry in the steady-state tokamak. CompX further developed and applied models for radiofrequency (rf) heating and current drive for applications to NSTX. These models build on a 30 year development of rf ray tracing (the all-frequencies GENRAY code) and higher dimensional Fokker-Planck rf-collisional modeling (the 3D collisional-quasilinear CQL3D code) at CompX. Two mainline current-drive rf modes are proposed for injection into NSTX: (1) electron Bernstein wave (EBW), and (2) high harmonic fast wave (HHFW) modes. Both these current drive systems provide a means for the rf to access the especially high density plasma--termed high beta plasma--compared to the strength of the required magnetic fields. The CompX studies entailed detailed modeling of the EBW to calculate the efficiency of the current drive system, and to determine its range of flexibility for driving current at spatial locations in the plasma cross-section. The ray tracing showed penetration into NSTX bulk plasma, relatively efficient current drive, but a limited ability to produce current over the whole

Project W-314 specific test and evaluation plan for 241-AY-02A pump pit upgrade

International Nuclear Information System (INIS)

Hays, W.H.

1998-01-01

This Specific Test and Evaluation Plan (STEP) defines the test and evaluation activities encompassing the upgrade of the 241-AY-02A Pump Pit for the W-314 Project. The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made to the 241-AY-02A Pump Pit by the W-314 Project. The STEP develops the outline for test procedures that verify the system's performance to the established Project design criteria. The STEP is a lower tier document based on the W-314 Test and Evaluation Plan (TEP)

Project W-314 specific test and evaluation plan for 241-AY-01A pump pit upgrade

International Nuclear Information System (INIS)

Hays, W.H.

1998-01-01

This Specific Test and Evaluation Plan (STEP) defines the test and evaluation activities encompassing the upgrade of the 241-AY-0IA Pump Pit for the W-314 Project. The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made to the 241-AY-01A Pump Pit by the W-314 Project. The STEP develops the outline for test procedures that verify the system's performance to the established Project design criteria. The STEP is a lower tier document based on the W-314 Test and Evaluation Plan (TEP)

Thermodynamic design of 10 kW Brayton cryocooler for HTS cable

Science.gov (United States)

Chang, Ho-Myung; Park, C. W.; Yang, H. S.; Sohn, Song Ho; Lim, Ji Hyun; Oh, S. R.; Hwang, Si Dole

2012-06-01

Thermodynamic design of Brayton cryocooler is presented as part of an ongoing governmental project in Korea, aiming at 1 km HTS power cable in the transmission grid. The refrigeration requirement is 10 kW for continuously sub-cooling liquid nitrogen from 72 K to 65 K. An ideal Brayton cycle for this application is first investigated to examine the fundamental features. Then a practical cycle for a Brayton cryocooler is designed, taking into account the performance of compressor, expander, and heat exchangers. Commercial software (Aspen HYSYS) is used for simulating the refrigeration cycle with real fluid properties of refrigerant. Helium is selected as a refrigerant, as it is superior to neon in thermodynamic efficiency. The operating pressure and flow rate of refrigerant are decided with a constraint to avoid the freezing of liquid nitrogen

Project W-314 specific test and evaluation plan for 241-AN-A valve pit

International Nuclear Information System (INIS)

Hays, W.H.

1998-01-01

The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made to the 241-AN-A Valve Pit by the W-314 Project. The STEP develops the outline for test procedures that verify the system's performance to the established Project design criteria. The STEP is a lower tier document based on the W-314 Test and Evaluation Plan (TEP)

FY 1999 Results of research and development project for polymer electrolyte fuel cells (PEFCs). Development of high current density type 10kW class portable power source systems; 1999 nendo kotai kobunshigata nenryo denchi no kenkyu kaihatsu seika hokokusho. Kodenryu mitsudogata 10kW kyu kahangata dengen system no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Described herein are the FY 1999 results of the research and development project aimed at development of multi-stacked PEFC modules and plate-stack type methanol reformers, and researches on portable power source systems, for development of methanol-air 10kW class (over 0.3W/cm{sup 2}) PEFC systems for portable use by the end of the FY 2000. The programs for the multi-stacked PEFC modules include improvement of tolerance against CO by improvement of catalyst bed and gas passage structures; development of a multi-stacked 5kW class stack structured to prevent fuel starvation; endurance tests conducted at a constant load using a simulated methanol reformate gas; and development, on a trial basis, of the stack using a formed separator. The programs for the plate-stack type methanol reformers include development, on a trial basis, of reforming catalysts integrated with flow passages, combustion catalysts and CO oxidation catalysts, and endurance evaluation tests for the reformer elements. The researches on portable power source systems include studies on, e.g., system control/behavior and efficiency, and basic system designs. The performance and environment endurance tests are also conducted for auxiliary equipment, e.g., blowers. (NEDO)

Project W-420 Ventilation Stack Monitoring System Year 2000 Compliance Assessment Project Plan

International Nuclear Information System (INIS)

BUSSELL, J.H.

1999-01-01

This assessment describes the potential Year 2000 (Y2K) problems and describes the methods for achieving Y2K Compliance for Project W-420, Ventilation Stack Monitoring Systems Upgrades. The purpose of this assessment is to give an overview of the project. This document will not be updated and any dates contained in this document are estimates and may change. The project work scope includes upgrades to ventilation stacks and generic effluent monitoring systems (GEMS) at the 244-A Double Contained Receiver Tank (DCRT), the 244-BX DCRT, the 244-CR Vault, tanks 241-C-105 and 241-C-106, the 244-S DCRT, and the 244-TX DCRT. A detailed description of system dates, functions, interfaces, potential Y2K problems, and date resolutions can not be described since the project is in the definitive design phase, This assessment will describe the methods, protocols, and practices to ensure that equipment and systems do not have Y2K problems

Análise da influência do traço nas propriedades do compósito cimento-madeira

Directory of Open Access Journals (Sweden)

Alessandra Monique Weber

2017-08-01

Full Text Available Os compósitos de cimento com adição de madeira apresentam vantagens, quando comparados a outros materiais convencionais da construção civil, como resistência à água, ao fogo e aos agentes deterioradores. Um dos obstáculos para o uso desse compósito é a inibição causada pela madeira na cura do cimento, devido aos componentes da madeira afetarem as reações, tendo como consequência um compósito de baixa qualidade. Dessa forma, este trabalho teve por objetivo avaliar diferentes traços do compósito cimento-madeira, utilizando resíduos de Pinus spp., por meio de ensaios de laboratório. Foi utilizado o cimento Portland CP II Z 32, relação água/cimento igual a 0,4; o aditivo químico escolhido foi o cloreto de cálcio para acelerar a pega. Para a comparação de desempenho, foram delimitadas quatro dosagens diferentes, com teores de adição de madeira de 10%, 20%, 25% e 33% em relação à massa de cimento. Para a análise, foram feitos ensaios das propriedades físicas e mecânicas para todas as dosagens, sendo, posteriormente, submetidas à análise da variância e teste de Tukey. Os resultados dos ensaios das propriedades físicas e mecânicas dos compósitos demonstraram que, para as relações escolhidas, quanto menor for a adição de madeira melhores serão os resultados das propriedades, mas mesmo os traços com maiores teores de madeira apresentam resultados relevantes, atentando-se apenas para o fato da relação água/cimento ser baixa para os casos analisados, e, devido a isso, ter influenciado negativamente nos resultados.

Response of loblolly pine to complete woody and herbaceous control: projected yields and economic outcomes - the COMProject

Science.gov (United States)

James H. Miller; R.L. Busby; B.R. Zutter; S.M. Zedaker; M.B. Edwards; R.A. Newbold

1995-01-01

Abstract.Age-8 and -9 data from the 13 study plantations of the Competition Omission Monitoring Project (COMP) were used to project yields and derive economic outcomes for loblolly pine (Pinus taeda L.). COMP treatments were chop-burn, complete woody plant control, complete herbaceous plant control for 4 years, and complete woody...

Functional design criteria for project W-252, phase II liquid effluent treatment and disposal. Revision 2

International Nuclear Information System (INIS)

Hatch, C.E.

1995-05-01

This document is the Functional Design Criteria for Project W-252. Project W-252 provides the scope to provide BAT/AKART (best available technology...) to 200 Liquid Effluent Phase II streams (B-Plant). This revision (Rev. 2) incorporates a major descoping of the project. The descoping was done to reflect a combination of budget cutting measures allowed by a less stringent regulatory posture toward the Phase II streams

Project W-521, waste feed delivery systems environmental permits and approvals plan

International Nuclear Information System (INIS)

TOLLEFSON, K.S.

1999-01-01

This document has been prepared to define the specific environmental requirements applicable to Project W-521. The document describes the permits and approvals necessary for the project to design, construct, and install planned upgrades, and provides a schedule of activities and provides cost estimates to complete the required permitting and approval activities

Characterization of Material from Wells 299-W10-35 (C7573) and 299-W14-74 (C7024)

Energy Technology Data Exchange (ETDEWEB)

Tilton, Fred A.; Wellman, Dawn M.; Bovaird, Chase C.; Strandquist, Sara C.

2011-07-15

The objective of this work was to characterize material accumulating on wells 299-W10-35 (C7573) and 299-W14-74 (C7024) to determine the type of material (i.e., chemical or biological) and, if the material is biological, to identify the microorganisms present.

Compósitos polímero-madeira preparados por polimerização in situ de metil metacrilato usando aditivos bifuncionais

Directory of Open Access Journals (Sweden)

Bruno Dufau Mattos

2015-12-01

Full Text Available Resumo O presente trabalho teve por objetivo a confecção de compósitos polímero-madeira por meio de polimerização in situ de metil metacrilato (MMA, utilizando ácido metacrílico (MAA e glicidil metacrilato (GMA como agentes de ligação e reticulação. Amostras de madeira de guapuruvu foram impregnadas em um sistema de vácuo e pressão e polimerizadas em estufa a 90°C por 10h, usando 1,5% de peroxido de benzoíla como catalisador. Os compósitos foram caracterizados por meio de testes de absorção de água e estabilidade dimensional, molhabilidade, ATR-IR, TGA, MEV e WPG. Os espectros de ATR-IR mostraram incrementos nas bandas a 1746, 1460, e 1145 cm–1, referentes as estruturas químicas dos polímeros dentro da madeira, confirmado posteriormente pelas imagens de MEV. A termogravimetria apontou reações químicas entre os copolímeros e a parede celular da madeira nos compósitos com GMA e MAA. Os compósitos preparados com MMA apresentaram incrementos acima de 50% nas propriedades higroscópicas e de estabilidade dimensional, entretanto a adição de GMA e MAA resultou em maiores incrementos nas mesmas propriedades, entre 66-90%.

Project specific quality assurance plan for Project W-178, 219-S secondary containment

International Nuclear Information System (INIS)

Buckles, D.I.

1994-01-01

The scope of this Quality Assurance Program Plan (QAPP) is to provide a system of Quality Assurance reviews and verifications on the design, procurement and construction of the 219-S Secondary Containment Upgrade. The reviews and verifications will be on activities associated with design, procurement, and construction of the Secondary Containment Upgrade which includes, but is not limited to demolition, removal, new tank installation, tank 103 isolation, tank cell refurbishment, electrical, instrumentation, piping/tubing including supports, pump and valves, and special coatings. The full project scope is defined in the project Functional Design Criteria (FDC), SD-W178-FDC-001, and all activities must be in compliance with this FDC and related design documentation

10 kW Contactless Power Transfer System for Rapid Charger of Electric Vehicle

OpenAIRE

Yamanaka, Tomohiro; Kaneko, Yasuyoshi; Abe, Shigeru; Yasuda, Tomio

2012-01-01

A contactless power transfer system for charging electric vehicles requires a high efficiency, a large air gap, and a good tolerance to lateral misalignment and needs to be compact and lightweight. A double-sided winding 10 kW transformer based on a 1.5 kW H-shaped core transformer was developed for a rapid charger. Even though the transformer capacity was increased, the dimensions of the 10 kW transformer were almost the same as those of the 1.5 kW transformer. In this paper, the design conc...

Project W-320, 241-C-106 sluicing supporting documentation bibliography

International Nuclear Information System (INIS)

Bailey, J.W.

1998-01-01

This supporting document has been prepared to make the listing of documentation used to develop, or in support of Project W-320, readily retrievable. All documents are sorted by document number and list the document type. Tank 241-C-106 has been included on the High Heat Load Watch List

COMP-angiopoietin-1 recovers molecular biomarkers of neuropathy and improves vascularisation in sciatic nerve of ob/ob mice.

Directory of Open Access Journals (Sweden)

Joanna Kosacka

Full Text Available BACKGROUND: Leptin-deficient ob/ob mice are a model of type 2 diabetes induced peripheral neuropathy. Ob/ob mice exhibit obesity, insulin resistance, hyperglycaemia, and alterations of peripheral nerve fibres and endoneural microvessels. Here we test the hypothesis that cartilage oligomeric matrix protein (COMP-Ang-1, a soluble and stabile form of Ang-1 which promotes angiogenesis and nerve growth, improves regeneration of nerve fibres and endoneural microvessels in ob/ob mice. METHODS AND FINDINGS: COMP-Ang-1 (100 ng/ml or NaCl were intraperitoneally (i.p. injected into male (N = 184, 3-month old, ob/ob or ob/+ mice for 7 and 21 days. We measured expression of Nf68, GAP43, Cx32, Cx26, Cx43, and TNFα in sciatic nerves using Western blot analysis. To investigate the inflammation in sciatic nerves, numbers of macrophages and T-cells were counted after immunofluorescence staining. In ultrathin section, number of myelinated/non-mylinated nerve fibers, g-ratio, the thickness of Schwann cell basal lamina and microvessel endothelium were investigated. Endoneural microvessels were reconstructed with intracardial FITC injection. Treatment with COMP-Ang-1 over 21 days significantly reduced fasting blood glucose and plasma cholesterol concentrations compared to saline treated ob/ob mice. In addition, COMP-Ang-1 treatment: 1 up-regulated expression of Nf68 and GAP43; 2 improved expression of gap junction proteins including connexin 32 and 26; 3 suppressed the expression of TNFα and Cx43 and 4 led to decreased macrophage and T-cell infiltration in sciatic nerve of ob/ob mice. The significant changes of sciatic nerve ultrastructure were not observed after 21-day long COMP-Ang-1 treatment. COMP-Ang-1 treated ob/ob mice displayed regeneration of small-diameter endoneural microvessels. Effects of COMP-Ang-1 corresponded to increased phosphorylation of Akt and p38 MAPK upon Tie-2 receptor. CONCLUSIONS: COMP-Ang-1 recovers molecular biomarkers of neuropathy

Management of the installation of a 10 MeV, 50 kW electron-beam irradiator

International Nuclear Information System (INIS)

Lawrence, C.B.; Armstrong, L.; Drewell, N.H.; McKeown, J.; Scott, L.; O'Brien, D.; Svendsen, E.

1995-08-01

An IMPELA-10/50 electron-beam irradiator has been installed by AECL Accelerators in Iotron Industries' service centre near Vancouver. Construction of the facility, installation of the accelerator and conveyor, and commissioning to the full rated power of 50 kW were completed in 12 months. Iotron began commercial irradiation immediately and the first continuous operation achieved 250 hours of production in 12 days. The engineering, production and project management organizations and activities to complete the on-schedule installation and commissioning are reviewed. (author). 3 refs., 2 tabs., 1 fig

Comptia Network+ review guide exam N10-006

CERN Document Server

Ferguson, Bill

2015-01-01

Be prepared for the Network+ exam CompTIA Network+ Review Guide is your ideal study companion for preparing for the CompTIA Network+ exam (N10-006). This concise review is the perfect companion to the CompTIA Network+ Study Guide and the CompTIA Network+ Deluxe Study Guide, with full exam coverage organized by objective for quick review and reinforcement of key topics. Each of the book's five parts is devoted to a specific domain area of the exam, providing a focused review to bolster areas of weak understanding. You get access to the Sybex test engine, which includes two bonus practice tests

Effect of light-activation methods and water storage on the flexural strength of two composite resins and a compomer Efeito da fotoativação e da armazenagem em água na resistência à flexão de duas resinas compostas e um compômero

Directory of Open Access Journals (Sweden)

Leonardo Eloy Rodrigues Filho

2006-04-01

Full Text Available The present study evaluated the flexural strength of three composite resins recommended for direct esthetic restorations: a polyacid modified composite (Dyract AP, a unimodal composite resin (Filtek Z250 and a hybrid composite resin (Point 4. The variation factors, apart from the type of composite resin, were the light activation method and the water storage period. The composite resins were light-cured in continuous mode (40 s, 500 mW/cm² or in ramp mode (0-800 mW/cm² for 10 s followed by 30 s at 800 mW/cm² and stored for 24 hours or 30 days in distilled water at 37°C. The data were analyzed by ANOVA and Tukey test for multiple comparisons (alpha = 0.05. The composite resin Z250 presented the highest mean flexural strength (166.74 MPa and Dyract AP presented the lowest one (129.76 MPa. The storage for 30 days decreased the flexural strength in ramp mode (24 h: 156.64 MPa; 30 days: 135.58 MPa. The light activation method alone did not lead to different flexural strength values.O presente estudo analisou a resistência à flexão de três compósitos recomendados para restaurações estéticas diretas: um compósito poliácido-modificado (Dyract AP, uma resina composta unimodal (Filtek Z250 e uma resina composta híbrida (Point 4. Os fatores de variação, além do tipo de compósito, foram o método de fotoativação e o período de armazenagem em água. Os materiais foram fotoativados continuamente por 40 s (500 mW/cm² ou com intensidade de luz crescente (0-800 mW/cm² por 10 s seguidos de 30 s a 800 mW/cm². Os períodos de armazenagem foram de 24 horas ou 30 dias em água destilada a 37°C. Os dados foram submetidos à análise de variância e ao teste de Tukey para comparações múltiplas (alfa = 0,05. A resina composta Z250 apresentou a maior média de resistência à flexão (166,74 MPa e a Dyract AP, a menor (129,76 MPa. A armazenagem por 30 dias diminuiu a resistência à flexão para o método de fotoativação crescente (24 h

Operating test report for project W-417, T-plant steam removal upgrade, waste transfer portion

International Nuclear Information System (INIS)

Myers, N.K.

1997-01-01

This Operating Test Report (OTR) documents the performance results of the Operating Test Procedure HNF-SD-W417-OTP-001 that provides steps to test the waste transfer system installed in the 221-T Canyon under project W-417. Recent modifications have been performed on the T Plant Rail Car Waste Transfer System. This Operating Test Procedure (OTP) will document the satisfactory operation of the 221-T Rail Car Waste Transfer System modified by project W-417. Project W-417 installed a pump in Tank 5-7 to replace the steam jets used for transferring liquid waste. This testing is required to verify that operational requirements of the modified transfer system have been met. Figure 2 and 3 shows the new and existing system to be tested. The scope of this testing includes the submersible air driven pump operation in Tank 5-7, liquid waste transfer operation from Tank 5-7 to rail car (HO-IOH-3663 or HO-IOH-3664), associated line flushing, and the operation of the flow meter. This testing is designed to demonstrate the satisfactory operation-of the transfer line at normal operating conditions and proper functioning of instruments. Favorable results will support continued use of this system for liquid waste transfer. The Functional Design Criteria for this system requires a transfer flow rate of 40 gallons per minute (GPM). To establish these conditions the pump will be supplied up to 90 psi air pressure from the existing air system routed in the canyon. An air regulator valve will regulate the air pressure. Tank capacity and operating ranges are the following: Tank No. Capacity (gal) Operating Range (gal) 5-7 10,046 0 8040 (80%) Rail car (HO-IOH-3663 HO-IOH-3664) 097219,157 Existing Tank level instrumentation, rail car level detection, and pressure indicators will be utilized for acceptance/rejection Criteria. The flow meter will be verified for accuracy against the Tank 5-7 level indicator. The level indicator is accurate to within 2.2 %. This will be for information only

Cartilage oligomeric matrix protein (COMP) in rheumatoid arthritis and its correlation with sonographic knee cartilage thickness and disease activity.

Science.gov (United States)

Sakthiswary, Rajalingham; Rajalingam, Shamala; Hussein, Heselynn; Sridharan, Radhika; Asrul, Abdul Wahab

2017-12-01

The aim of the study is to investigate the correlation of serum cartilage oligomeric matrix protein (COMP) levels with articular cartilage damage based on sonographic knee cartilage thickness (KCT) and disease activity in rheumatoid arthritis (RA). A total of 61 RA patients and 27 healthy controls were recruited in this study. Serum samples were obtained from all subjects to determine the serum COMP levels. All subjects had bilateral ultrasound scan of their knees. The KCT was based on the mean of measurements at three sites: the medial condyle, lateral condyle and intercondylar notch. Besides, the RA patients were assessed for their disease activity based on 28-joint-based Disease Activity Score (DAS 28). Serum COMP concentrations were significantly elevated in the RA patients compared to the controls (p = 0.001). The serum COMP levels had an inverse relationship with bilateral KCT in RA subjects and the healthy controls. COMP correlated significantly with disease activity based on DAS 28 (r = 0.299, p = 0.010), disease duration (r = 0.439, p = correlation between serum COMP and DAS 28 scores was comparable to the traditional markers of inflammation: erythrocyte sedimentation rate (ESR) (r = 0.372, p = 0.003) and C-reactive protein (CRP) (r = 0.305, p = 0.017). The serum COMP is a promising biomarker in RA which reflects disease activity and damage to the articular cartilage.

Project W-320, 241-C-106 sluicing piping calculations, Volume 7

International Nuclear Information System (INIS)

Bailey, J.W.

1998-01-01

The object of this report is to calculate the hydraulic forces imposed at the sluicer nozzle. This is required by Project W-320 waste retrieval for tank 241-C-106. The method of analysis used is Bernoulli's momentum equation for stead flow

Ross In Situ Uranium Recovery Project NESHAP Subpart W Construction Approval

Science.gov (United States)

On May 5, 2015, EPA issued a Construction Approval under the National Emission Standards for Hazardous Air Pollutants (NESHAPs) at 40 CFR Part 61, subpart W, to Strata Energy, Inc., for their Ross In Situ Recovery (ISR) Uranium Project in Crook County, WY.

Influência de Negro de Fumo Modificado com Polianilina na Estrutura de Compósitos com Poli(Fluoreto de Vinilideno

Directory of Open Access Journals (Sweden)

Zucolotto Valtencir

2002-01-01

Full Text Available Compósitos condutores elétricos a base de poli(fluoreto de vinilideno (PVDF e negro de fumo modificado com polianilina (Eeonomer® foram preparados através do processamento por fusão. Resultados de reometria de torque indicaram que a presença de polianilina no negro de fumo é vantajosa ao processamento por fusão, reduzindo a viscosidade do fundido em comparação com a aditivação com negro de fumo puro. Compósitos contendo acima de 5% em peso de Eeonomer® apresentaram condutividade da ordem de 10-2 S/cm. Esse valor se manteve estável mesmo após tratamento térmico a 150degreesC por 170 h em atmosfera ambiente. Análises por calorimetria diferencial de varredura (DSC e difração de Raios-X mostraram que o tipo e a quantidade de Eeonomer®, assim como a taxa de resfriamento da amostra, podem afetar a temperatura de fusão, o grau de cristalinidade e a fase cristalina do PVDF presente no compósito.

Compósitos de Borracha Natural com Compostos Condutivos à Base de Negro de Fumo e Polímero Condutor Natural Rubber Composites with Conductive Compounds based on Carbon Black and Conducting Polymers

Directory of Open Access Journals (Sweden)

Marinalva A. dos Santos

2001-09-01

Full Text Available Neste trabalho foram desenvolvidos compósitos condutores elétricos de borracha natural contendo negro de fumo e compostos condutivos baseados em polímeros condutores (Eenomer®. Os compósitos foram processados a quente num reômetro de torque HAAKE e moldados por prensagem. Foram obtidas placas homogêneas, flexíveis e com ótimo acabamento superficial. Os compósitos foram analisados pelas medidas de torque no processamento, medidas de condutividade elétrica, análise termogravimétrica (TGA, calorimetria diferencial de varredura (DSC e ensaios de tração. Estes compósitos apresentaram valores de condutividade elétrica entre 10-7 a 10-1 S/cm, dependendo do tipo de negro de fumo ou composto condutivo utilizado e da quantidade destes no compósito. A análise térmica demonstrou que os compósitos são termicamente estáveis até cerca de 300°C. Os compostos condutivos atuam como reforço para a borracha natural melhorando suas propriedades mecânicas sem perder significativamente sua flexibilidade.In this work, electrically conducting composites of natural rubber with carbon black and natural rubber with conductive compounds containing electrically conducting polymers (Eenomer® were developed. The composites were processed in a torque reometer HAAKE and then hot pressed. Homogeneous and flexible plates were obtained with excellent surface finish. The composites were analysed by the torque measurement during processing, electrical conductivity, thermogravimetric analysis (TGA, differential scanning calorimetric (DSC and mechanical analysis. Conductivity in the order of 10-7 to 10-1 S/cm were achieved, depending on the type of carbon black or conductive compound used and their content in the composite. Thermal analysis demonstrated that the compounds are thermally stable until 300°C. The conductive compounds act as reinforcements in the natural rubber matrix, improving its mechanical properties without significant loss on its

Modelagem de dispositivo Iosipescu para medição de propriedades de cisalhamento de materiais compósitos

OpenAIRE

Fabrício Nascimento Ribeiro

2013-01-01

Os projetos de novas aeronaves possuem suas estruturas primárias fabricados em materiais compósitos, o que resulta em diferentes tipos de cargas agindo em peças de compósitos. O comportamento de compósitos sujeitos a carga de cisalhamento é algo difícil de caracterizar especialmente porque os ensaios de cisalhamento possuem dificuldades em obter uma condição de cisalhamento puro e uniforme. O presente trabalho busca modelar o ensaio de cisalhamento Iosipescu com o método de elementos finitos,...

Preliminary safety evaluation for 241-C-106 waste retrieval, project W-320

International Nuclear Information System (INIS)

Conner, J.C.

1994-01-01

This document presents the Preliminary Safety Evaluation for Project W-320, Tank 241-C-106 Waste Retrieval Sluicing System (WRSS). The US DOE has been mandated to develop plans for response to safety issues associated with the waste storage tanks at the Hanford Site, and to report the progress of implementing those plans to Congress. The objectives of Project W-230 are to design, fabricate, develop, test, and operate a new retrieval system capable of removing a minimum of about 75% of the high-heat waste contained in C-106. It is anticipated that sluicing operations can remove enough waste to reduce the remaining radiogenic heat load to levels low enough to resolve the high-heat safety issue as well as allow closure of the tank safety issue

Beam Transport Devices for the 10 kW IR Free Electron Laser

International Nuclear Information System (INIS)

Lawrence Dillon-Townes; Michael Bevins; David Kashy; Stephanie Slachtouski; Ronald Lassiter; George Neil; Michelle Shinn; Joseph Gubeli; Christopher Behre; David Douglas; David W. Waldman; George Biallas; Lawrence Munk; Christopher Gould

2005-01-01

Beam transport components for the 10kW IR Free Electron Laser (FEL) at Thomas Jefferson National Accelerator Facility (Jefferson Lab) were designed to manage (1) electron beam transport and (2) photon beam transport. An overview of the components will be presented in this paper. The electron beam transport components were designed to address RF heating, maintain an accelerator transport vacuum of 1 x 10 -8 torr, deliver photons to the optical cavity, and provide 50 kW of beam absorption during the energy recovery process. The components presented include a novel shielded bellows, a novel zero length beam clipper, a one decade differential pumping station with a 7.62 cm (3.0 inch) aperture, and a 50 kW beam dump. The photon beam transport components were designed to address the management of photons delivered by the accelerator transport. The optical cavity manages the photons and optical transport delivers the 10 kW of laser power to experimental labs. The optical cavity component presented is a unique high reflector vessel and the optical transport component presented is a turning mirror cassette

Project W-211, initial tank retrieval systems, retrieval control system software configuration management plan

International Nuclear Information System (INIS)

RIECK, C.A.

1999-01-01

This Software Configuration Management Plan (SCMP) provides the instructions for change control of the W-211 Project, Retrieval Control System (RCS) software after initial approval/release but prior to the transfer of custody to the waste tank operations contractor. This plan applies to the W-211 system software developed by the project, consisting of the computer human-machine interface (HMI) and programmable logic controller (PLC) software source and executable code, for production use by the waste tank operations contractor. The plan encompasses that portion of the W-211 RCS software represented on project-specific AUTOCAD drawings that are released as part of the C1 definitive design package (these drawings are identified on the drawing list associated with each C-1 package), and the associated software code. Implementation of the plan is required for formal acceptance testing and production release. The software configuration management plan does not apply to reports and data generated by the software except where specifically identified. Control of information produced by the software once it has been transferred for operation is the responsibility of the receiving organization

Leader mode d'emploi 10 compétences essentielles pour communiquer, collaborer et innover

CERN Document Server

Paquet, René

2013-01-01

Communiquer efficacement, favoriser la collaboration, stimuler la créativité et résoudre les conflits dans un climat de coopération, voilà les aptitudes qui caractérisent le leader qui dirige avec brio. Que vous soyez à la barre d'une équipe de cinq ou de trente personnes, vous trouverez dans cet ouvrage tous les outils pour entretenir la motivation de vos employés, susciter les bonnes réactions, éviter les faux pas, maximiser votre productivité et ainsi devenir un meneur de premier ordre. Quelques conseils à appliquer : Prendre le temps de créer une relation avec chacun de mes collaborateurs. Apprendre les règles, les normes et les valeurs de l'organisation. Favoriser le développement des compétences et l'acquisition des connaissances. Établir des canaux de communication. Exprimer des attentes claires. Quelques erreurs à éviter Faire de la micro-gestion : tenter de tout contrôler. Travailler en vase clos. Remettre à plus tard les tâches moins agréables. Rester dans ma zone de confort ...

Project W320 52-inch diameter equipment container load test: Test report

International Nuclear Information System (INIS)

Bellomy, J.R.

1995-01-01

This test report summarizes testing activities and documents the results of the load tests performed on-site and off-site to structural qualify the 52-inch equipment containers designed and fabricated under Project W-320

Permitting plan for Project W-340, Tank 241-C-106 manipulator retrieval arm

International Nuclear Information System (INIS)

Tollefson, K.S.

1995-01-01

This document describes the regulatory requirements and describes alternative strategies for obtaining permits and approvals for Project W-340, Tank 241-C-106 Manipulator Retrieval Arm. A comprehensive review of environmental regulations has indicated that several environmental reviews, permits, and approvals are required before design, construction, and operation of the facility. The environmental reviews, permits, and approvals, as well the regulatory authority potentially applicable to the Project W-340 Long Reach Manipulator Arm include the following: National Environmental Policy Act of 1969 -- US Department of Energy, Headquarters; State Environmental Policy Act of 1971 -- State of Washington Department of Ecology; Air Permitting; Dangerous Waste Permitting; Miscellaneous Reviews/Permits/Approvals. This document describes the environmental reviews, permits, and approval requirements for the project. It provides a summary of permit application data requirements, alternative strategies for permit completion and approval, as well as the estimated probability of success for each alternative strategy

Photovoltaic applications in the southwest for the National Park Service. [10 to 100 kW

Energy Technology Data Exchange (ETDEWEB)

Peatfield, C.R.; Jarvinen, P.O.

1977-04-28

Nearly three megawatts of electrical power are produced annually by diesel/electric generator sets at National Park Service sites, according to a survey conducted jointly by the NPS and MIT/Lincoln Laboratory. To prove the economic viability of photovoltaic power generation systems to meet NPS electric power needs as well as to stimulate public acceptance and reliance on solar-generated electricity, NPS and MIT/LL are cooperating in a Field Tests and Applications Project sponsored by the U.S. Energy Research and Development Administration. The power level for the applications will be in the range from 10 to 100 kW. Ten of the most promising NPS sites were visited and evaluated. Based on ten criteria, Natural Bridges National Monument in Utah was selected as the optimum first pick. The FT and A Project and evaluation details for the ten sites are described.

Estudo das propriedades mecânicas e térmicas do polímero Poli-3-hidroxibutirato (PHB e de compósitos PHB/pó de madeira Study of mechanical and thermal properties of the polymer Poly-3-hydroxybutyrate (PHB and PHB/wood flour composites

Directory of Open Access Journals (Sweden)

Miriam L. C. Machado

2010-01-01

Full Text Available O PHB (Poli-3-hidroxibutirato é um termoplástico biodegradável sintetizado por fermentação submersa a partir de matérias-primas renováveis. A utilização de fibras naturais tem sido pesquisada visando melhorar as propriedades e reduzir o custo do PHB. O objetivo deste trabalho foi o estudo das propriedades mecânicas (resistência à tração, térmicas (Análise termogravimétrica,TGA, e Calorimetria Exploratória Diferencial, DSC e reológicas (torque em câmera de mistura e Índice de Fluidez do PHB e de compósitos de PHB/pó de madeira processados e irradiados. Foram preparados compósitos com concentrações de PHB/pó de madeira de 90/10, 80/20 e 70/30 (m/m. Os materiais foram processados através das seguintes etapas de processamento: calandragem, fragmentação, extrusão, granulação, secagem e moldagem por injeção para confecção dos corpos de prova. A incorporação do pó de madeira aumentou o grau de cristalinidade e a temperatura de cristalização do polímero, e nos compósitos PHB/pó de madeira 80/20 e 70/30 a rigidez do material aumentou. A irradiação após o processamento (dose de 30 kGy provocou aumento da rigidez do PHB puro e dos compósitos PHB/pó de madeira 90/10 e 80/20, embora outras propriedades tenham decrescido. O compósito PHB/pó de madeira 70/30 apresentou os melhores resultados em termos econômicos e de processamento.PHB (Polyhydroxybutyrate is a biodegradable thermoplastic synthesized by submerse fermentation of renewable raw materials. The use of natural fibers has been largely researched to improve PHB properties, as well as reducing its cost. The purpose of this work was the study of the mechanical, thermal properties and rheological analyses (torque in mixer camera and melt flow index of processed and irradiated PHB, as well as PHB/wood flour composites. PHB/wood flour composites were prepared with PHB/wood relation of 90/10, 80/20 and 70/30 (w/w. Both pure PHB and composites were

Project W-320, 241-C-106 sluicing: Piping calculations. Volume 4

International Nuclear Information System (INIS)

Bailey, J.W.

1998-01-01

This supporting document has been prepared to make the FDNW calculations for Project W-320 readily retrievable. The objective of this calculation is to perform the structural analysis of the Pipe Supports designed for Slurry and Supernate transfer pipe lines in order to meet the requirements of applicable ASME codes. The pipe support design loads are obtained from the piping stress calculations W320-27-I-4 and W320-27-I-5. These loads are the total summation of the gravity, pressure, thermal and seismic loads. Since standard typical designs are used for each type of pipe support such as Y-Stop, Guide and Anchors, each type of support is evaluated for the maximum loads to which this type of supports are subjected. These loads are obtained from the AutoPipe analysis and used to check the structural adequacy of these supports

Project W-320, 241-C-106 sluicing: Piping calculations. Volume 4

Energy Technology Data Exchange (ETDEWEB)

Bailey, J.W.

1998-07-24

This supporting document has been prepared to make the FDNW calculations for Project W-320 readily retrievable. The objective of this calculation is to perform the structural analysis of the Pipe Supports designed for Slurry and Supernate transfer pipe lines in order to meet the requirements of applicable ASME codes. The pipe support design loads are obtained from the piping stress calculations W320-27-I-4 and W320-27-I-5. These loads are the total summation of the gravity, pressure, thermal and seismic loads. Since standard typical designs are used for each type of pipe support such as Y-Stop, Guide and Anchors, each type of support is evaluated for the maximum loads to which this type of supports are subjected. These loads are obtained from the AutoPipe analysis and used to check the structural adequacy of these supports.

Développer des compétences interactionnelles en collaborant à distance

Directory of Open Access Journals (Sweden)

Charlotte Dejean-Thircuir

2010-01-01

Full Text Available Cet article vise à montrer de quelles façons des étudiants d’un Master2 professionnel de didactique des langues engagés dans la réalisation d’une tâche collaborative à distance sont amenés à mettre en œuvre et à développer des compétences interactionnelles et des compétences instrumentales en construisant des schèmes d’utilisation de l’outil de communication qu’est le chat, dans ce contexte particulier. Cette étude s’inscrit dans le champ de la communication pédagogique médiatisée par ordinateur; l’analyse des interactions verbales entre étudiants s’appuie sur des outils issus du champ de la pragmatique linguistique interactionniste.

Tank farm restoration and safe operation, project W-314, upgrade scope summary report (USSR)

International Nuclear Information System (INIS)

Jacobson, R.W.

1997-01-01

This revision to the Project W-314 Upgrade Scope Summary Report (USSR), incorporates changes to the project scope from Alternative Generation Analysis (AGA), customer guidance, and changing requirements. It defines the actual upgrades currently in scope, and provides traceability to the requirements and/or drivers

Influência do tratamento químico da fibra de bananeira em compósitos de poli(etileno-co-acetato de vinila com e sem agente de expansão

Directory of Open Access Journals (Sweden)

Matheus V. G. Zimmermann

2014-01-01

Full Text Available Neste trabalho foi avaliada a influência do tratamento alcalino na fibra de bananeira (FB e seu uso como agente de reforço em compósitos expandidos de poli(etileno-co-acetato de vinila - EVA. O processo de mistura dos compósitos ocorreu em um misturador de rolos aberto e após conformados e expandidos em uma prensa aquecida com moldes de volumes variáveis. Os compósitos foram avaliados por suas propriedades mecânicas, térmicas e morfológicas. Os resultados indicam que o tratamento alcalino promove a extração de componentes menos estáveis na FB, tais como a lignina, hemicelulose, ceras e óleos de baixo peso molecular. O uso da FB nos compósitos proporciona um decréscimo das propriedades mecânicas de resistência à tração e rasgo em relação ao EVA puro devido a moderadas propriedades de interface polímero-fibra. Nos compósitos expandidos, as propriedades mecânicas decrescem com a diminuição da densidade em função da maior presença de espaços vazios no interior dos compósitos, porém as propriedades mecânicas específicas de resistência ao rasgo apresentaram melhores resultados com 10 pcr de FB em todos os moldes utilizados.

Compósitos a partir de materiais de fontes renováveis como alternativa para o desenvolvimento de produtos

Directory of Open Access Journals (Sweden)

Eliana Paula Calegari

2016-04-01

Full Text Available A preocupação ambiental tem gerado interesse na pesquisa de novos materiais que estejam alinhados com os princípios da sustentabilidade. Entre esses materiais, atualmente, encontram-se os compósitos produzidos a partir de recursos de fontes renováveis. Este artigo apresenta os resultados de um estudo de caso acerca de produtos em que são empregados os referidos compósitos. Realizou-se uma pesquisa na rede mundial de computadores usando a ferramenta de buscas google sobre produtos fabricados com esses compósitos e comparou-se com produtos fabricados a partir de materiais usualmente utilizados na indústria, tais como polímeros, metais e cerâmicas. Constatou-se que os compósitos feitos a partir de fontes renováveis estão sendo, principalmente, aplicados em embalagens, na produção de ferramentas para jardinagem e vasos para plantas. Dessa forma, observou-se que os referidos compósitos podem substituir materiais comumente empregados na indústria atendendo aos requisitos funcionais e estéticos demandados na confecção desses produtos.

5 MeV 300 kW electron accelerator project

International Nuclear Information System (INIS)

Auslender, V.L.; Cheskidov, V.G.; Gornakov, I.V.

2004-01-01

The paper presents a project of a high power linear accelerator for industrial applications. The accelerator has a modular structure and consists of the chain of accelerating cavities connected by the axis-located coupling cavities with coupling slots in the common walls. Main parameters of the accelerator are: operating frequency of 176 MHz, electron energy of up to 5 MeV, average beam power of 300 kW. The required RF pulse power can be supplied by the TH628 diacrode

Advanced conceptual design report solid waste retrieval facility, phase I, project W-113

International Nuclear Information System (INIS)

Smith, K.E.

1994-01-01

Project W-113 will provide the equipment and facilities necessary to retrieve suspect transuranic (TRU) waste from Trench 04 of the 218W-4C burial ground. As part of the retrieval process, waste drums will be assayed, overpacked, vented, head-gas sampled, and x-rayed prior to shipment to the Phase V storage facility in preparation for receipt at the Waste Receiving and Processing Facility (WRAP). Advanced Conceptual Design (ACD) studies focused on project items warranting further definition prior to Title I design and areas where the potential for cost savings existed. This ACD Report documents the studies performed during FY93 to optimize the equipment and facilities provided in relation to other SWOC facilities and to provide additional design information for Definitive Design

Efficient 10 kW diode-pumped Nd:YAG rod laser

Science.gov (United States)

Akiyama, Yasuhiro; Takada, Hiroyuki; Sasaki, Mitsuo; Yuasa, Hiroshi; Nishida, Naoto

2003-03-01

As a tool for high speed and high precision material processing such as cutting and welding, we developed a rod-type all-solid-state laser with an average power of more than 10 kW, an electrical-optical efficiency of more than 20%, and a laser head volume of less than 0.05 m3. We developed a highly efficient diode pumped module, and successfully obtained electrical-optical efficiencies of 22% in CW operation and 26% in QCW operation at multi-kW output powers. We also succeeded to reduce the laser head volume, and obtained the output power of 12 kW with an efficiency of 23%, and laser head volume of 0.045 m3. We transferred the technology to SHIBAURA mechatronics corp., who started to provide the LD pumped Nd:YAG laser system with output power up to 4.5 kW. We are now continuing development for further high power laser equipment.

Compósitos de borracha natural com polianilina Composites of natural rubber with polyaniline

Directory of Open Access Journals (Sweden)

Patrini D. Galiani

2007-06-01

Full Text Available Compósitos de borracha natural (Hevea brasiliensis-BN/polianilina - PANI, com diferentes composições foram obtidos através da polimerização por emulsão do monômero anilina na presença da BN e do ácido dodecilbenzeno sulfônico (DBSA. Filmes finos e homogêneos foram obtidos por prensagem a quente. Os compósitos foram caracterizados por condutividade elétrica, FTIR, UV-vis-NIR, DSC e difração de raios X. Compósito com condutividade elétrica cerca de 14 ordens de grandeza maior que a BN foi obtido. Este alto valor de condutividade é atribuído à formação da PANI no estado dopado no compósito, que foi verificado através das técnicas de UV-vis-NIR e FTIR. Os resultados obtidos com a técnica de DSC e difratometria de raios X indicaram que os polímeros são imiscíveis e que a presença da borracha não altera significantemente a fase cristalina da PANI-DBSA no compósito.In this work composites with different compositions were obtained from natural rubber (Hevea brasiliensis (NR and polyaniline (PANI using the emulsion polymerization of aniline in the presence of NR and dodecylbenzenesulfonic acid (DBSA. The samples in film form were obtained by pressing the precipitate at 100 °C for 5 minutes. The composites were characterized by electrical conductivity, Fourier-transform infrared spectroscopy (FTIR, UV-vis-NIR spectroscopy, differential scanning calorimetry (DSC and X ray diffraction. Composites with electrical conductivity about 14 orders of magnitude higher than NR were obtained. The UV-vis-NIR and FTIR spectra showed that PANI-DBSA was formed in the composites, thus making it responsible for their high conductivity. The DSC thermograms indicated that the two polymers are immiscible and X ray diffraction evidenced that NB does not considerably affect PANI-DBSA crystalline phase in the composite.

The missing binary tungsten iodide archetype cluster W{sub 4}I{sub 10}

Energy Technology Data Exchange (ETDEWEB)

Stroebele, Markus; Meyer, H. Juergen [Section for Solid State and Theoretical Inorganic Chemistry, Institute of Inorganic Chemistry, Universitaet Tuebingen (Germany)

2016-12-15

The tungsten iodide cluster W{sub 4}I{sub 10} is obtained by thermal conversion of W{sub 4}I{sub 13}. The crystal structure of W{sub 4}I{sub 10} was solved and refined by means of powder X-ray diffraction techniques. The structure is based on a tetrahedral tungsten cluster core, two face capping, five edge-bridging, and four apical iodido ligands of which two have bridging functionalities with adjacent clusters. Cluster chains in the structure are arranged following the motive of a kinked chain. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Êtres capables et compétents : lecture anthropologique et pistes pragmatiques

OpenAIRE

Genard, Jean-Louis; Cantelli, Fabrizio

2008-01-01

Les termes « compétences » et « capacités » occupent depuis quelques années une place de plus en plus importante dans le vocabulaire de la sociologie, notamment de la sociologie pragmatique. On les retrouve toutefois aussi dans d’autres champs théoriques (le terme capabilities chez Amartya Sen) ou dans le vocabulaire des politiques publiques qui évoquent des politiques de « capacitation », ou des « seuils de compétences ». Face à ce constat, l’article développe l’hypothèse d’un véritable tour...

Project W-320, 241-C-106 sluicing HVAC calculations, Volume 4

Energy Technology Data Exchange (ETDEWEB)

Bailey, J.W.

1998-07-30

This supporting document has been prepared to make the FDNW calculations for Project W-320, readily retrievable. The report contains the following design calculations: Cooling load in pump pit 241-AY-102; Pressure relief seal loop design; Process building piping stress analysis; Exhaust skid maximum allowable leakage criteria; and Recirculation heat, N509 duct requirements.

The semantics of Chemical Markup Language (CML for computational chemistry : CompChem

Directory of Open Access Journals (Sweden)

Phadungsukanan Weerapong

2012-08-01

Full Text Available Abstract This paper introduces a subdomain chemistry format for storing computational chemistry data called CompChem. It has been developed based on the design, concepts and methodologies of Chemical Markup Language (CML by adding computational chemistry semantics on top of the CML Schema. The format allows a wide range of ab initio quantum chemistry calculations of individual molecules to be stored. These calculations include, for example, single point energy calculation, molecular geometry optimization, and vibrational frequency analysis. The paper also describes the supporting infrastructure, such as processing software, dictionaries, validation tools and database repositories. In addition, some of the challenges and difficulties in developing common computational chemistry dictionaries are discussed. The uses of CompChem are illustrated by two practical applications.

On-line process analysis innovation: DiComp (tm) shunting dielectric sensor technology

Science.gov (United States)

Davis, Craig R.; Waldman, Frank A.

1993-01-01

The DiComp Shunting Dielectric Sensor (SDS) is a new patent-pending technology developed under the Small Business Innovation Research Program (SBIR) for NASA's Kennedy Space Center. The incorporation of a shunt electrode into a conventional fringing field dielectric sensor makes the SDS uniquely sensitive to changes in material dielectric properties in the KHz to MHz range which were previously detectable only at GHz measurement frequencies. The initial NASA application of the SDS for Nutrient Delivery Control has demonstrated SDS capabilities for thickness and concentration measurement of Hoagland nutrient solutions. The commercial introduction of DiComp SDS technology for concentration and percent solids measurements in dispersions, emulsions and solutions represents a new technology for process measurements for liquids in a variety of industries.

The semantics of Chemical Markup Language (CML) for computational chemistry : CompChem.

Science.gov (United States)

Phadungsukanan, Weerapong; Kraft, Markus; Townsend, Joe A; Murray-Rust, Peter

2012-08-07

: This paper introduces a subdomain chemistry format for storing computational chemistry data called CompChem. It has been developed based on the design, concepts and methodologies of Chemical Markup Language (CML) by adding computational chemistry semantics on top of the CML Schema. The format allows a wide range of ab initio quantum chemistry calculations of individual molecules to be stored. These calculations include, for example, single point energy calculation, molecular geometry optimization, and vibrational frequency analysis. The paper also describes the supporting infrastructure, such as processing software, dictionaries, validation tools and database repositories. In addition, some of the challenges and difficulties in developing common computational chemistry dictionaries are discussed. The uses of CompChem are illustrated by two practical applications.

Project W-320, operational test procedure OTP-320-003 test report

International Nuclear Information System (INIS)

Bevins, R.R.

1998-01-01

This report documents and summarizes the results of OTP-320-003 Project W-320 Operational Testing of the WRSS Supernate Transfer System. Project W-320 Operational Test OTP-320-003 was performed to verify components of the Waste Retrieval Sluicing System (WRSS) supernate transfer system functioned as designed following construction completion and turnover to operations. All equipment operation was performed by Tank Farms Operations personnel following the operational test procedure and referenced operating procedures. Supernate Transfer line Flushing System Testing was completed over the course of approximately 4 weeks as tank farm conditions and configuration, equipment availability, and operations resources allowed. All testing was performed with the 702-AZ ventilation system and the 296-P-16 ventilation systems in operation. Test procedure OTP-320-003 required two revisions during testing to incorporate Procedure Changes Authorizations (PCAs) necessary to facilitate testing. Various sections of testing are documented on each procedure revision. The completed test procedure is included as Attachment A. Exception Reports generated during the course of testing are included as Attachment B

Trevino Project: a fast-track approach for a small construction project

International Nuclear Information System (INIS)

Schick, C.J.; Lynn, N.S.

1982-01-01

The approach to a construction project can vary according to the size, location, and degree of difficulty associated with the project. This paper deals with one approach that can be taken to a small construction project, the fast-track approach. A small construction project can be defined as a project having less than $20 million capital cost or a project with a low degree of difficulty. This approach is very applicable to in-situ leaching uranium projects, small precious metal operations, etc. The approach to the small project is that of fast-tracking the project in order to minimize the time over which capital expenditure occurs and also to reduce the indirect costs of field expense, construction supplies, construction equipment, etc. In order to fast-track a project it is necessary to do a very precise job on the preliminary phases of the project such as preliminary engineering, plant site location, environmental permits, etc. 2 figures, 2 tables

Propriedades mecânicas de tração de compósitos poliéster/tecidos híbridos sisal/vidro Properties of polyester/hibrid sisal-glass fabrics

Directory of Open Access Journals (Sweden)

Laura H. de Carvalho

2006-03-01

Full Text Available O desempenho e o custo de compósitos podem ser alterados por hibridização e, neste sentido, é relativamente comum o uso combinado de fibras e reforços minerais no desenvolvimento destes materiais. No presente trabalho o desempenho mecânico de compósitos poliéster insaturado/ tecidos híbridos sisal-vidro foram investigados em função do teor de fibra e direção do teste. Foram confeccionados três tecidos híbridos (com 30, 40 e 50% em peso de vidro com fios de sisal no urdume e fibras de vidro na trama. Os compósitos foram moldados por compressão à temperatura ambiente com os tecidos alinhados. Os resultados indicam que houve um aumento nas propriedades mecânicas de tração de todos os compósitos com o aumento do teor de fibras. Para os compósitos reforçados por tecidos com baixo teor de fibra de vidro, as propriedades tenderam a ser mais elevadas quando os testes foram conduzidos na direção do sisal, enquanto que para os tecidos com elevado teor de vidro, o oposto foi observado. Estes comportamentos foram associados ao teor de fibra de vidro na direção do teste e ao diâmetro das fibras de sisal. Em baixos teores de fibra o sisal agiria como inclusão ou defeito, prejudicando as propriedades mecânicas; em elevados teores as propriedades do vidro suplantariam os defeitos provocados pelo sisal.Hybridization can alter both mechanical performance and cost of polymer composites, and novel composite materials can be obtained by the combination of both fibrous and mineral reinforcements. In the present work the mechanical performance of unsaturated polyester/hybrid sisal-glass fabrics was determined as a function of fibre content and test direction. Three different hybrid fabrics (30, 40 and 50% w/w glass content with sisal strings in the warp and glass roving in the weft were hand weaved. Aligned fabric compression moulded composites were obtained at room temperature. The results showed enhanced properties with fibre content

Estudo do comportamento da resina base na formulação de compósitos de politetrafluoretileno com bronze

OpenAIRE

Ronaldo Euzébio Bento

2011-01-01

Resumo: Esse trabalho concentra os estudos na investigação das propriedades de resistência a tração e alongamento do compósito de Politetrafluoretileno (PTFE) com 60% de bronze após a substituição do tipo de PTFE utilizado na formulação desse compósito. Atualmente esse compósito utiliza PTFE convencional na formulação e o objetivo é alterar para PTFE modificado. A motivação para essa alteração deveu-se ao fato que o PTFE convencional apresenta disponibilidade limitada dificultando o desenvolv...

5W intracavity frequency-doubled green laser for laser projection

Science.gov (United States)

Yan, Boxia; Bi, Yong; Li, Shu; Wang, Dongdong; Wang, Dongzhou; Qi, Yan; Fang, Tao

2014-11-01

High power green laser has many applications such as high brightness laser projection and large screen laser theater. A compact and high power green-light source has been developed in diode-pumped solid-state laser based on MgO doped periodically poled LiNbO3 (MgO:PPLN). 5W fiber coupled green laser is achieved by dual path Nd:YVO4/MgO:PPLN intra-cacity frequency-doubled. Single green laser maximum power 2.8W at 532nm is obtained by a 5.5W LD pumped, MgO:PPLN dimensions is 5mm(width)×1mm(thickness)×2mm(length), and the optical to optical conversion efficiency is 51%. The second LD series connected with the one LD, the second path green laser is obtained using the same method. Then the second path light overlap with the first path by the reflection mirrors, then couple into the fiber with a focus mirror. Dual of LD, Nd:YVO4, MgO:PPLN are placed on the same heat sink using a TEC cooling, the operating temperature bandwidth is about 12°C and the stablity is 5% in 96h. A 50×50×17mm3 laser module which generated continuous-wave 5 W green light with high efficiency and width temperature range is demonstrated.

CompTIA Linux+ study guide exam LX0-103 and exam LX0-104

CERN Document Server

Bresnahan, Christine

2015-01-01

CompTIA Authorized Linux+ prepCompTIA Linux+ Study Guide is your comprehensive study guide for the Linux+ Powered by LPI certification exams. With complete coverage of 100% of the objectives on both exam LX0-103 and exam LX0-104, this study guide provides clear, concise information on all aspects of Linux administration, with a focus on the latest version of the exam. You'll gain the insight of examples drawn from real-world scenarios, with detailed guidance and authoritative coverage of key topics, including GNU and Unix commands, system operation, system administration, system services, secu

CompTIA Linux+ Complete Study Guide (Exams LX0-101 and LX0-102)

CERN Document Server

Smith, Roderick W

2010-01-01

Prepare for CompTIA's Linux+ Exams. As the Linux server and desktop markets continue to grow, so does the need for qualified Linux administrators. CompTIA's Linux+ certification (Exams LX0-101 and LX0-102) includes the very latest enhancements to the popular open source operating system. This detailed guide not only covers all key exam topics—such as using Linux command-line tools, understanding the boot process and scripts, managing files and file systems, managing system security, and much more—it also builds your practical Linux skills with real-world examples. Inside, you'll find:. Full co

Functions and requirements for Project W-236B, Initial Pretreatment Module: Revision 1

International Nuclear Information System (INIS)

Swanson, L.M.

1994-01-01

Hanford Site tank waste supernatants will be pretreated to separate the low-level and high-level fractions. The low-level waste fraction, containing the bulk of the chemical constituents, must be processed into a vitrified waste product which will be disposed of onsite, in a safe, environmentally sound, and cost effective manner. The high-level waste fraction separated during supernatant pretreatment (primarily cesium) will be recombined with an additional high-level waste fraction generated from pretreatment of the tank waste sludges and solids. This combined high-level waste fraction will be immobilized as glass and disposed in a geological repository. The purpose of this document is to establish the functional requirements baseline for Project W-236B, Initial Pretreatment Module, by defining the level 5 and 6 functions and requirements for the project. A functional analysis approach has been used to break down the program functions and associated physical requirements that each function must meet. As the systems engineering process evolves, the design requirements document will replace this preliminary functions and requirements document. The design requirements document (DRD) will identify key decisions and associated uncertainties that impact the project. A revision of this document to a DRD is not expected to change the performance requirements or open issues. However, additional requirements and issues may be identified

Project W-314 specific test and evaluation plan for 241-AN-A valve pit

International Nuclear Information System (INIS)

Hays, W.H.

1997-01-01

The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made to the 241-AN-A Valve Pit by the W-314 Project. The STEP develops the outline for test procedures that verify the system's performance to the established Project design criteria. The STEP is a ''lower tier'' document based on the W-314 Test and Evaluation Plan (TEP) This STEP encompasses all testing activities required to demonstrate compliance to the project design criteria as it relates to the modifications of the AN-A valve pit. The Project Design Specifications (PDS) identify the specific testing activities required for the Project. Testing includes Validations and Verifications (e.g., Commercial Grade Item Dedication activities), Factory Acceptance Tests (FATs), installation tests and inspections, Construction Acceptance Tests (CATs), Acceptance Test Procedures (ATPs), Pre-Operational Test Procedures (POTPs), and Operational Test Procedures (OTPs). It should be noted that POTPs are not required for testing of the modifications to the 241-AN-A Valve Pit. The STEP will be utilized in conjunction with the TEP for verification and validation

Teaching Competencies for the Online Environment | Enseigner les compétences pour l’environnement en ligne

Directory of Open Access Journals (Sweden)

Heather Marie Farmer

2016-08-01

Full Text Available The goals of this study are to identify key competency areas that lead to success in online instruction and to develop a framework that supports professional development and self-assessment. To identify the key competency areas, skills and behaviours presented within current literature were analyzed. Secondly, gaps were identified and levels of competence were determined within each key competency area. The resulting analysis produced the Online Teaching Competency (OTC Matrix including five competency areas: Community & Netiquette, Active Teaching/Facilitating, Instructional Design, Tools & Technology, and Leadership & Instruction. This leveled competency matrix can be used to inform professional development in the online teaching environment and is also a useful guide in the areas of self-assessment, portfolio design, and the development and evaluation of professional development opportunities. Cette étude a comme objectifs de cerner les principaux domaines de compétences qui mènent à la réussite de l’instruction en ligne et de développer un cadre qui soutient le développement professionnel et l’autoévaluation. Afin de cerner les principaux domaines de compétences, une analyse des aptitudes et comportements présentés dans les études actuelles a été réalisée. Deuxièmement, les écueils ont été cernés et les niveaux de compétence ont été déterminés au sein de chaque domaine de compétences. L’analyse qui en a résulté a généré la matrice des compétences de l’enseignement en ligne, comprenant cinq domaines de compétences : collectivité et nétiquette, enseignement actif/animation active, conception de l’instruction, outils et technologie, ainsi que leadership et instruction. Cette matrice graduée peut servir à façonner le développement professionnel dans un environnement d’enseignement en ligne. Elle sert aussi de guide pratique pour les domaines de l’auto-évaluation, de la conception de

Systems Engineering Management Plan for Tank Farm Restoration and Safety Operations, Project W-314

International Nuclear Information System (INIS)

MCGREW, D.L.

2000-01-01

The Systems Engineering Management Plan for Project W-314 has been prepared within the guidelines of HNF-SD-WM-SEMP-002, TWRS Systems Engineering Management Plan. The activities within this SEMP have been tailored, in accordance with the TWRS SEMP and DOE Order 430.1, Life Cycle Asset Management, to meet the needs of the project

Impregnação de filmes do compósito de policarbonato (PC e sílica-gel (Si com corante fotocrômico em fluido supercrítico - DOI: 10.4025/actascitechnol.v32i1.1999

Directory of Open Access Journals (Sweden)

Fernanda de Almeida Fin de Lima

2009-12-01

Full Text Available O objetivo deste trabalho foi estudar a impregnação do corante fotocromático Reversacol Graphit® em filmes do compósito de policarbonato (PC e sílica-gel (Si, com a finalidade de obter aplicações em lentes fotocrômicas. Filmes de PC puros também foram impregnados nas mesmas condições, para verificar o efeito da adição de sílica-gel. Os filmes do compósito foram produzidos em proporções de Si:PC de 1:40 e 1:80 (m m-1, pelo método casting. Para a impregnação do corante Reversacol Graphit® nos filmes obtidos foi utilizado o processo supercrítico, pela sua eficiência e benefícios. A impregnação foi feita nos tempos de 15, 30, 45, 60, 90, 120, 150 e 180 min. A temperatura e a pressão adotadas foram de 60ºC e 120 bar. A quantidade de pigmento impregnado nos filmes de Si:PC – 1:40 e 1:80 (m m-1 foi de 29 e 23% de massa de corante por massa de compósito, respectivamente, e para o filme de PC puro foi de apenas 2,2% massa de corante por massa de compósito. Pelas análises térmicas, verificou-se que os filmes do compósito apresentaram maior estabilidade térmica. Pela técnica de microscopia eletrônica, observou-se que os filmes de PC puro e dos compósitos Si:PC – 1:40 e 1:80 (m m-1 apresentaram uma superfície lisa e homogênea.

Mild myopathy is associated with COMP but not MATN3 mutations in mouse models of genetic skeletal diseases.

Directory of Open Access Journals (Sweden)

Katarzyna A Piróg

Full Text Available Pseudoachondroplasia (PSACH and multiple epiphyseal dysplasia (MED are skeletal disorders resulting from mutations in COMP, matrilin-3 or collagen IX and are characterised by short-limbed dwarfism and premature osteoarthritis. Interestingly, recent reports suggest patients can also manifest with muscle weakness. Here we present a detailed analysis of two mouse models of the PSACH/MED disease spectrum; ΔD469 T3-COMP (PSACH and V194D matrilin-3 (MED. In grip test experiments T3-COMP mice were weaker than wild-type littermates, whereas V194D mice behaved as controls, confirming that short-limbed dwarfism alone does not contribute to PSACH/MED-related muscle weakness. Muscles from T3-COMP mice showed an increase in centronuclear fibers at the myotendinous junction. T3-COMP tendons became more lax in cyclic testing and showed thicker collagen fibers when compared with wild-type tissue; matrilin-3 mutant tissues were indistinguishable from controls. This comprehensive study of the myopathy associated with PSACH/MED mutations enables a better understanding of the disease progression, confirms that it is genotype specific and that the limb weakness originates from muscle and tendon pathology rather than short-limbed dwarfism itself. Since some patients are primarily diagnosed with neuromuscular symptoms, this study will facilitate better awareness of the differential diagnoses that might be associated with the PSACH/MED spectrum and subsequent care of PSACH/MED patients.

Environmental permits and approvals plan for high-level waste interim storage, Project W-464

International Nuclear Information System (INIS)

Deffenbaugh, M.L.

1998-01-01

This report discusses the Permitting Plan regarding NEPA, SEPA, RCRA, and other regulatory standards and alternatives, for planning the environmental permitting of the Canister Storage Building, Project W-464

Acceptance test procedure for Project W-049H

International Nuclear Information System (INIS)

Buckles, D.I.

1994-01-01

The Acceptance Test Procedure (ATP) program for Project W-049H (200 Area Treated Effluent Disposal Facility [TEDF]) covers three activities as follows: (1) Disposal System; (2) Collection System; and (3) Instrumentation and Control System. Each activity has its own ATP. The purpose of the ATPs is to reverify that the systems have been constructed in accordance with the construction documents and to demonstrate that the systems function as required by the Project criteria. The Disposal System ATP covers the testing of the following: disposal line flowmeters, room air temperatures in the Disposal Station Sampling Building, effluent valves and position indicators, disposal pond level monitors, automated sampler, pressure relief valves, and overflow diversion sluice gates. The Collection System ATP covers the testing of the two pump stations and all equipment installed therein. The Instrumentation and Control (I and C) ATP covers the testing of the entire TEDF I and C system. This includes 3 OCS units, modem, and GPLI cabinets in the ETC control room; 2 pump stations; disposal station sampling building; and all LCUs installed in the field

Managing projects using a project management approach

Directory of Open Access Journals (Sweden)

Marko D. Andrejić

2011-04-01

Full Text Available Modern management theory treats all complex tasks and duties like projects and make these projects possible to be managed by a particular organizational-management concept in order to achieve a goal effectively. A large number of jobs and tasks performed in the system of defense or for defense purposes have the characteristics of projects. Project management is both a skill and a science of monitoring human, material, financial, energy and other resources to achieve required objectives within the given limits: deadlines, time, budget, possibility of realization and the satisfaction of the interests of all project participants. Project management is a traditional area of applied (or functional management focused on managing complex and uncertain situations with defined goals. Introduction In conditions of rapid change and high uncertainty, only adaptive organizations survive, i. e. those that are able not only to react quickly to changes but also to proactively take advantage of changes. Development of project management The biggest influence on the development of the area had complex jobs within the engineering profession. In parallel with the traditional approach new approaches began to develop, while the traditional one still remained in use. Contrary to the traditional engineering approach, a dynamic model first developed in order to respond to demands for greater control of costs. Project management Project management is a skill and knowledge of human and material resources to achieve set objectives within prescribed limits: deadlines, time, budget, possibility of realization, and the satisfaction of all participants in the project. In order to realize a project effectively, it is necessary to manage it rationally. Planning and project management A project plan is a document that allows all team members insight on where to go, when to start and when to arrive, what is necessary to be done in order to achieve the project objectives and what

Dynamic simulation of 10 kW Brayton cryocooler for HTS cable

Science.gov (United States)

Chang, Ho-Myung; Park, Chan Woo; Yang, Hyung Suk; Hwang, Si Dole

2014-01-01

Dynamic simulation of a Brayton cryocooler is presented as a partial effort of a Korean governmental project to develop 1˜3 km HTS cable systems at transmission level in Jeju Island. Thermodynamic design of a 10 kW Brayton cryocooler was completed, and a prototype construction is underway with a basis of steady-state operation. This study is the next step to investigate the transient behavior of cryocooler for two purposes. The first is to simulate and design the cool-down process after scheduled or unscheduled stoppage. The second is to predict the transient behavior following the variation of external conditions such as cryogenic load or outdoor temperature. The detailed specifications of key components, including plate-fin heat exchangers and cryogenic turbo-expanders are incorporated into a commercial software (Aspen HYSYS) to estimate the temporal change of temperature and flow rate over the cryocooler. An initial cool-down scenario and some examples on daily variation of cryocooler are presented and discussed, aiming at stable control schemes of a long cable system.

Dynamic simulation of 10 kW Brayton cryocooler for HTS cable

International Nuclear Information System (INIS)

Chang, Ho-Myung; Park, Chan Woo; Yang, Hyung Suk; Hwang, Si Dole

2014-01-01

Dynamic simulation of a Brayton cryocooler is presented as a partial effort of a Korean governmental project to develop 1∼3 km HTS cable systems at transmission level in Jeju Island. Thermodynamic design of a 10 kW Brayton cryocooler was completed, and a prototype construction is underway with a basis of steady-state operation. This study is the next step to investigate the transient behavior of cryocooler for two purposes. The first is to simulate and design the cool-down process after scheduled or unscheduled stoppage. The second is to predict the transient behavior following the variation of external conditions such as cryogenic load or outdoor temperature. The detailed specifications of key components, including plate-fin heat exchangers and cryogenic turbo-expanders are incorporated into a commercial software (Aspen HYSYS) to estimate the temporal change of temperature and flow rate over the cryocooler. An initial cool-down scenario and some examples on daily variation of cryocooler are presented and discussed, aiming at stable control schemes of a long cable system

Dynamic simulation of 10 kW Brayton cryocooler for HTS cable

Energy Technology Data Exchange (ETDEWEB)

Chang, Ho-Myung; Park, Chan Woo [Hong Ik University, Department of Mechanical Engineering, Seoul, 121-791 (Korea, Republic of); Yang, Hyung Suk; Hwang, Si Dole [KEPCO Research Institute, Daejeon, 305-760 (Korea, Republic of)

2014-01-29

Dynamic simulation of a Brayton cryocooler is presented as a partial effort of a Korean governmental project to develop 1∼3 km HTS cable systems at transmission level in Jeju Island. Thermodynamic design of a 10 kW Brayton cryocooler was completed, and a prototype construction is underway with a basis of steady-state operation. This study is the next step to investigate the transient behavior of cryocooler for two purposes. The first is to simulate and design the cool-down process after scheduled or unscheduled stoppage. The second is to predict the transient behavior following the variation of external conditions such as cryogenic load or outdoor temperature. The detailed specifications of key components, including plate-fin heat exchangers and cryogenic turbo-expanders are incorporated into a commercial software (Aspen HYSYS) to estimate the temporal change of temperature and flow rate over the cryocooler. An initial cool-down scenario and some examples on daily variation of cryocooler are presented and discussed, aiming at stable control schemes of a long cable system.

SCIDAC Center for simulation of wave particle interactions CompX participation

Energy Technology Data Exchange (ETDEWEB)

Harvey, R.W. [CompX, Del Mar, CA (United States)

2017-11-14

Harnessing the energy that is released in fusion reactions would provide a safe and abundant source of power to meet the growing energy needs of the world population. The next step toward the development of fusion as a practical energy source is the construction of ITER, a device capable of producing and controlling the high performance plasma required for self-sustaining fusion reactions, or “burning” plasma. The input power required to drive the ITER plasma into the burning regime will be supplied primarily with a combination of external power from radio frequency waves in the ion cyclotron range of frequencies and energetic ions from neutral beam injection sources, in addition to internally generated Ohmic heating from the induced plasma current that also serves to create the magnetic equilibrium for the discharge. The ITER project is a large multi-billion dollar international project in which the US participates. The success of the ITER project depends critically on the ability to create and maintain burning plasma conditions, it is absolutely necessary to have physics-based models that can accurately simulate the RF processes that affect the dynamical evolution of the ITER discharge. The Center for Simulation of WavePlasma Interactions (CSWPI), also known as RF-SciDAC, is a multi-institutional collaboration that has conducted ongoing research aimed at developing: (1) Coupled core-to-edge simulations that will lead to an increased understanding of parasitic losses of the applied RF power in the boundary plasma between the RF antenna and the core plasma; (2) Development of models for core interactions of RF waves with energetic electrons and ions (including fusion alpha particles and fast neutral beam ions) that include a more accurate representation of the particle dynamics in the combined equilibrium and wave fields; and (3) Development of improved algorithms that will take advantage of massively parallel computing platforms at the petascale level and

COMP-angiopoietin 1 increases proliferation, differentiation, and migration of stem-like cells through Tie-2-mediated activation of p38 MAPK and PI3K/Akt signal transduction pathways

Energy Technology Data Exchange (ETDEWEB)

Kook, Sung-Ho [Cluster for Craniofacial Development and Regeneration Research, Institute of Oral Biosciences and School of Dentistry, Chonbuk National University, Jeonju (Korea, Republic of); Lim, Shin-Saeng [School of Dentistry and Dental Research Institute, Seoul National University, Seoul (Korea, Republic of); Cho, Eui-Sic; Lee, Young-Hoon; Han, Seong-Kyu; Lee, Kyung-Yeol [Cluster for Craniofacial Development and Regeneration Research, Institute of Oral Biosciences and School of Dentistry, Chonbuk National University, Jeonju (Korea, Republic of); Kwon, Jungkee [College of Veterinary Medicine, Chonbuk National University, Jeonju (Korea, Republic of); Hwang, Jae-Won; Bae, Cheol-Hyeon [Cluster for Craniofacial Development and Regeneration Research, Institute of Oral Biosciences and School of Dentistry, Chonbuk National University, Jeonju (Korea, Republic of); Seo, Young-Kwon [Research Institute of Biotechnology, Dongguk University, Seoul (Korea, Republic of); Lee, Jeong-Chae, E-mail: leejc88@jbnu.ac.kr [Cluster for Craniofacial Development and Regeneration Research, Institute of Oral Biosciences and School of Dentistry, Chonbuk National University, Jeonju (Korea, Republic of)

2014-12-12

Highlights: • COMP-Ang1 induces Tie-2 activation in BMMSCs, but not in primary osteoblasts. • Tie-2 knockdown inhibits COMP-Ang1-stimulated proliferation and osteoblastogenesis. • Tie-2 knockdown prevents COMP-Ang1-induced activation of PI3K/Akt and p38 MAPK. • COMP-Ang1 induces migration of cells via activation of PI3K/Akt and CXCR4 pathways. • COMP-Ang1 stimulates in vivo migration of PDLSCs into a calvarial defect site of rats. - Abstract: Recombinant COMP-Ang1, a chimera of angiopoietin-1 (Ang1) and a short coiled-coil domain of cartilage oligomeric matrix protein (COMP), is under consideration as a therapeutic agent capable of inducing the homing of cells with increased angiogenesis. However, the potentials of COMP-Ang1 to stimulate migration of mesenchymal stem cells (MSCs) and the associated mechanisms are not completely understood. We examined the potential of COMP-Ang1 on bone marrow (BM)-MSCs, human periodontal ligament stem cells (PDLSCs), and calvarial osteoblasts. COMP-Ang1 augmented Tie-2 induction at protein and mRNA levels and increased proliferation and expression of runt-related transcription factor 2 (Runx2), osterix, and CXCR4 in BMMSCs, but not in osteoblasts. The COMP-Ang1-mediated increases were inhibited by Tie-2 knockdown and by treating inhibitors of phosphoinositide 3-kinase (PI3K), LY294002, or p38 mitogen-activated protein kinase (MAPK), SB203580. Phosphorylation of p38 MAPK and Akt was prevented by siRNA-mediated silencing of Tie-2. COMP-Ang1 also induced in vitro migration of BMMSCs and PDLSCs. The induced migration was suppressed by Tie-2 knockdown and by CXCR4-specific peptide antagonist or LY294002, but not by SB203580. Furthermore, COMP-Ang1 stimulated the migration of PDLSCs into calvarial defect site of rats. Collectively, our results demonstrate that COMP-Ang1-stimulated proliferation, differentiation, and migration of progenitor cells may involve the Tie-2-mediated activation of p38 MAPK and PI3K/Akt pathways.

COMP-angiopoietin 1 increases proliferation, differentiation, and migration of stem-like cells through Tie-2-mediated activation of p38 MAPK and PI3K/Akt signal transduction pathways

International Nuclear Information System (INIS)

Kook, Sung-Ho; Lim, Shin-Saeng; Cho, Eui-Sic; Lee, Young-Hoon; Han, Seong-Kyu; Lee, Kyung-Yeol; Kwon, Jungkee; Hwang, Jae-Won; Bae, Cheol-Hyeon; Seo, Young-Kwon; Lee, Jeong-Chae

2014-01-01

Highlights: • COMP-Ang1 induces Tie-2 activation in BMMSCs, but not in primary osteoblasts. • Tie-2 knockdown inhibits COMP-Ang1-stimulated proliferation and osteoblastogenesis. • Tie-2 knockdown prevents COMP-Ang1-induced activation of PI3K/Akt and p38 MAPK. • COMP-Ang1 induces migration of cells via activation of PI3K/Akt and CXCR4 pathways. • COMP-Ang1 stimulates in vivo migration of PDLSCs into a calvarial defect site of rats. - Abstract: Recombinant COMP-Ang1, a chimera of angiopoietin-1 (Ang1) and a short coiled-coil domain of cartilage oligomeric matrix protein (COMP), is under consideration as a therapeutic agent capable of inducing the homing of cells with increased angiogenesis. However, the potentials of COMP-Ang1 to stimulate migration of mesenchymal stem cells (MSCs) and the associated mechanisms are not completely understood. We examined the potential of COMP-Ang1 on bone marrow (BM)-MSCs, human periodontal ligament stem cells (PDLSCs), and calvarial osteoblasts. COMP-Ang1 augmented Tie-2 induction at protein and mRNA levels and increased proliferation and expression of runt-related transcription factor 2 (Runx2), osterix, and CXCR4 in BMMSCs, but not in osteoblasts. The COMP-Ang1-mediated increases were inhibited by Tie-2 knockdown and by treating inhibitors of phosphoinositide 3-kinase (PI3K), LY294002, or p38 mitogen-activated protein kinase (MAPK), SB203580. Phosphorylation of p38 MAPK and Akt was prevented by siRNA-mediated silencing of Tie-2. COMP-Ang1 also induced in vitro migration of BMMSCs and PDLSCs. The induced migration was suppressed by Tie-2 knockdown and by CXCR4-specific peptide antagonist or LY294002, but not by SB203580. Furthermore, COMP-Ang1 stimulated the migration of PDLSCs into calvarial defect site of rats. Collectively, our results demonstrate that COMP-Ang1-stimulated proliferation, differentiation, and migration of progenitor cells may involve the Tie-2-mediated activation of p38 MAPK and PI3K/Akt pathways

Resistência de união de compósitos do tipo Bulk Fill: análise in vitro

Directory of Open Access Journals (Sweden)

Caroline de Farias CHARAMBA

2017-03-01

Full Text Available Resumo Introdução A classe dos compósitos Bulk-Fill tem obtido popularidade com a promessa de ser fotopolimerizado efetivamente em camadas de até quatro milímetros, fato que contrasta com os dois milímetros requisitados para os compósitos convencionais para manutenção da adesividade da restauração. Objetivo O objetivo deste estudo foi analisar a resistência de união à dentina de restaurações confeccionadas com compósitos do tipo Bulk-Fill. Material e método Foram utilizados 15 terceiros molares humanos, cuja superfície oclusal foi cortada e a dentina foi exposta. Esses elementos dentários foram divididos em três grupos conforme o material restaurador utilizado. O sistema adesivo usado foi o mesmo para todos os grupos. Posteriormente, os dentes restaurados foram cortados para originar palitos de aproximadamente 1 mm de largura, 1 mm de profundidade e 8 mm de altura, que foram fixados às garras do dispositivo de microtração. Foram utilizados dez palitos de cada dente, totalizando 50 palitos por grupo. Os dados de resistência de união à microtração foram expressos em megapascal (MPa. As fraturas foram analisadas em microscópio óptico. Os dados foram analisados através dos testes ANOVA e Tukey (p<0,05. Resultado Os três compósitos estudados diferiram estatisticamente entre si (p<0,000. Os compósitos Bulk-Fill apresentaram resistências de união semelhantes e superiores ao convencional (p<0,000. A fratura mais encontrada foi a mista, em todos os grupos. Conclusão Os compósitos Bulk-Fill apresentaram maiores valores de resistência de união com a técnica restauradora utilizada.

Project W-320 thermal hydraulic model benchmarking and baselining

International Nuclear Information System (INIS)

Sathyanarayana, K.

1998-01-01

Project W-320 will be retrieving waste from Tank 241-C-106 and transferring the waste to Tank 241-AY-102. Waste in both tanks must be maintained below applicable thermal limits during and following the waste transfer. Thermal hydraulic process control models will be used for process control of the thermal limits. This report documents the process control models and presents a benchmarking of the models with data from Tanks 241-C-106 and 241-AY-102. Revision 1 of this report will provide a baselining of the models in preparation for the initiation of sluicing

Project W-314 specific test and evaluation plan for AZ tank farm upgrades

International Nuclear Information System (INIS)

Hays, W.H.

1998-01-01

The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made by the addition of the SN-631 transfer line from the AZ-O1A pit to the AZ-02A pit by the W-314 Project. The STEP develops the outline for test procedures that verify the system's performance to the established Project design criteria. The STEP is a lower tier document based on the W-314 Test and Evaluation P1 an (TEP). Testing includes Validations and Verifications (e.g., Commercial Grade Item Dedication activities, etc), Factory Tests and Inspections (FTIs), installation tests and inspections, Construction Tests and Inspections (CTIs), Acceptance Test Procedures (ATPs), Pre-Operational Test Procedures (POTPs), and Operational Test Procedures (OTPs). The STEP will be utilized in conjunction with the TEP for verification and validation

Modelos de percolação elétrica aplicados para compósitos poliméricos condutores

Directory of Open Access Journals (Sweden)

Paulo Henrique da Silva Leite Coelho

Full Text Available Resumo O presente artigo apresenta a aplicação e adequação dos modelos de percolação elétrica em trabalhos experimentais e teóricos da literatura para compósitos poliméricos condutores. Foi realizado um levantamento das publicações referentes aos modelos estudados para os diferentes tipos de cargas condutoras mais aplicadas na preparação destes compósitos, tais como pós metálicos, grafite, negro de fumo, nanofibras e nanotubos de carbono. A discussão está apresentada quanto à adequação dos modelos ao comportamento dos compósitos na influência das cargas nas propriedades elétricas de matrizes poliméricas.

1000 Hours of Testing Completed on 10-kW Hall Thruster

Science.gov (United States)

Mason, Lee S.

2001-01-01

Between the months of April and August 2000, a 10-kW Hall effect thruster, designated T- 220, was subjected to a 1000-hr life test evaluation. Hall effect thrusters are propulsion devices that electrostatically accelerate xenon ions to produce thrust. Hall effect propulsion has been in development for many years, and low-power devices (1.35 kW) have been used in space for satellite orbit maintenance. The T-220, shown in the photo, produces sufficient thrust to enable efficient orbital transfers, saving hundreds of kilograms in propellant over conventional chemical propulsion systems. This test is the longest operation ever achieved on a high-power Hall thruster (greater than 4.5 kW) and is a key milestone leading to the use of this technology for future NASA, commercial, and military missions.

Project Management Plan for Initial Tank Retrieval Systems, Project W-211

International Nuclear Information System (INIS)

VAN BEEK, J.E.

1999-01-01

Project W-211, Initial Tank Retrieval Systems (ITRS), is a fiscal year 1994 Major Systems Acquisition that will provide systems for retrieval of radioactive wastes from selected double-shell tanks (DST). The contents of these tanks are a combination of supernatant liquids and settled solids. To retrieve waste from the tanks, it is first necessary to mix the liquid and solids prior to transferring the slurry to alternative storage or treatment facilities. The ITRS will provide systems to mobilize the settled solids and transfer the wastes out of the tanks. In so doing, ITRS provides feed for future processing plants, allows for consolidation of tank solids to manage space within existing DST storage capacity, and supports continued safe storage of tank waste. The ITRS scope has been revised to include waste retrieval systems for tanks AP-102, AP-104, AP-108, AN-103, AN-104, AN-105, AY-102, AZ-102, and SY-102. This current tank selection and sequence provides retrieval systems supporting the Privatized waste processing plant and sustains the ability to provide final remediation of several watch list DSTs via treatment. The ITRS is configured to support changing program needs, as constrained by available budget, by maintaining the flexibility for exchanging tanks requiring mixer pump-based retrieval systems and shifting the retrieval sequence. Preliminary design was configured such that an adequate basis exists for initiating Title II design of a mixer pump based retrieval system for any DST. This Project Management Plan (PMP) documents the methodology for managing the ITRS, formalizes organizational responsibilities and interfaces, and identifies project requirements such as change control, design verification, systems engineering, and human factors engineering

Design review report: AN valve pit upgrades for Project W-314, tank farm restoration and safe operations

International Nuclear Information System (INIS)

Boes, K.A.

1998-01-01

This Design Review Report (DRR) documents the contractor design verification methodology and records associated with project W-314's AN Valve Pit Upgrades design package. The DRR includes the documented comments and their respective dispositions for this design. Acceptance of the comment dispositions and closure of the review comments is indicated by the signatures of the participating reviewers. Project W-314, Tank Farm Restoration and Safe Operations, is a project within the Tank Waste Remediation System (TWRS) Tank Waste Retrieval Program. This project provides capital upgrades for the existing Hanford tank farms' waste transfer, instrumentation, ventilation, and electrical infrastructure systems. To support established TWRS programmatic objectives, the project is organized into two distinct phases. The initial focus of the project (i.e., Phase 1) is on waste transfer system upgrades needed to support the TWRS Privatization waste feed delivery system. Phase 2 of the project will provide upgrades to support resolution of regulatory compliance issues, improve tank infrastructure reliability, and reduce overall plant operating/maintenance costs. Within Phase 1 of the W-314 project, the waste transfer system upgrades are further broken down into six major packages which align with the project's work breakdown structure. Each of these six sub-elements includes the design, procurement, and construction activities necessary to accomplish the specific tank farm upgrades contained within the package. The first package to be performed is the AN Valve Pit Upgrades package. The scope of the modifications includes new pit cover blocks, valve manifolds, leak detectors, transfer line connections (for future planned transfer lines), and special protective coating for the 241-AN-A and 241-AN-B valve pits

Design requirements document for project W-520, immobilized low-activity waste disposal

International Nuclear Information System (INIS)

Ashworth, S.C.

1998-01-01

This design requirements document (DRD) identifies the functions that must be performed to accept, handle, and dispose of the immobilized low-activity waste (ILAW) produced by the Tank Waste Remediation System (TWRS) private treatment contractors and close the facility. It identifies the requirements that are associated with those functions and that must be met. The functional and performance requirements in this document provide the basis for the conceptual design of the Tank Waste Remediation System Immobilized Low-Activity Waste disposal facility project (W-520) and provides traceability from the program-level requirements to the project design activity

Design requirements document for project W-520, immobilized low-activity waste disposal

Energy Technology Data Exchange (ETDEWEB)

Ashworth, S.C.

1998-08-06

This design requirements document (DRD) identifies the functions that must be performed to accept, handle, and dispose of the immobilized low-activity waste (ILAW) produced by the Tank Waste Remediation System (TWRS) private treatment contractors and close the facility. It identifies the requirements that are associated with those functions and that must be met. The functional and performance requirements in this document provide the basis for the conceptual design of the Tank Waste Remediation System Immobilized Low-Activity Waste disposal facility project (W-520) and provides traceability from the program-level requirements to the project design activity.

Desenvolvimento e análise de compósitos cimentícios híbridos de alto desempenho

Directory of Open Access Journals (Sweden)

V. J. Ferrari

Full Text Available Neste trabalho, estudou-se o efeito da hibridização em compósitos cimentícios numa tentativa de modificar o material em sua microestrutura e melhorar o processo de transferência de tensões da matriz cimentícia para as fibras de aço. Para tanto, fibras curtas e microfibras de aço foram adicionadas a uma matriz cimentícia de argamassa para confecção de corpos-de-prova prismáticos entalhados e com dimensões de 150 mm x 150 mm x 500 mm. Os corpos-de-prova foram submetidos a ensaios de flexão com carga no meio do vão sob o controle dos deslocamentos de abertura da entrada do entalhe (CMOD. O desempenho dos compósitos híbridos foi comparado ao dos compósitos produzidos somente com a adição da fibra curta de aço e também ao da matriz sem fibras. Os resultados foram analisados considerando-se os parâmetros de tenacidade flexional e tenacidade ao fraturamento do material. O processo de hibridização permitiu obter compósitos de alto desempenho.

Design criteria document, Fire Protection Task, K Basin Essential Systems Recovery, Project W-405

International Nuclear Information System (INIS)

Johnson, B.H.

1994-01-01

The K Basin were constructed in the early 1950's with a 20 year design life. The K Basins are currently in their third design life and are serving as a near term storage facility for irradiated N Reactor fuel until an interim fuel storage solution can be implemented. In April 1994, Project W-405, K Basin Essential Systems Recovery, was established to address (among other things) the immediate fire protection needs of the 100K Area. A Fire Barrier Evaluation was performed for the wall between the active and inactive areas of the 105KE and 105KW buildings. This evaluation concludes that the wall is capable of being upgraded to provide an equivalent level of fire resistance as a qualified barrier having a fire resistance rating of 2 hours. The Fire Protection Task is one of four separate Tasks included within the scope of Project W405, K Basin Essential systems Recovery. The other three Tasks are the Water Distribution System Task, the Electrical System Task, and the Maintenance Shop/Support Facility Task. The purpose of Project W-405's Fire Protection Task is to correct Life Safety Code (NFPA 101) non-compliances and to provide fire protection features in Buildings 105KE, 105KW and 190KE that are essential for assuring the safe operation and storage of spent nuclear fuel at the 100K Area Facilities' Irradiated Fuel Storage Basins (K Basins)

Compósitos à base de gesso com resíduos de EVA e vermiculita

OpenAIRE

Oliveira,Marilia P. de; Barbosa,Normando P.; Torres,Sandro M.; Leal,Antonio F.; Silva,Cibelle G.

2012-01-01

O gesso é um dos materiais de construção mais antigos de que se tem conhecimento. Algumas de suas propriedades lhes conferem vantagens, tais como resistência ao fogo e isolamentos térmico e acústico. Objetivou-se, com este trabalho, avaliar as propriedades físico-mecânicas de compósitos à base de gesso com a incorporação de resíduos da indústria de calçados, o etileno acetato de vinila (EVA) e a vermiculita. O desenvolvimento desses compósitos tem como propósito a produção de elementos de rev...

Design review plan for Multi-Function Waste Tank Facility (Project W-236A)

International Nuclear Information System (INIS)

Renfro, G.G.

1994-01-01

This plan describes how the Multi-Function Waste Tank Facility (MWTF) Project conducts reviews of design media; describes actions required by Project participants; and provides the methodology to ensure that the design is complete, meets the technical baseline of the Project, is operable and maintainable, and is constructable. Project W-236A is an integrated project wherein the relationship between the operating contractor and architect-engineer is somewhat different than that of a conventional project. Working together, Westinghouse Hanford Company (WHC) and ICF Karser Hanford (ICF KH) have developed a relationship whereby ICF KH performs extensive design reviews and design verification. WHC actively participates in over-the-shoulder reviews during design development, performs a final review of the completed design, and conducts a formal design review of the Safety Class I, ASME boiler and Pressure Vessel Code items in accordance with WHC-CM-6-1, Standard Engineering Practices

Production of W + W - pairs via γ * γ * → W + W - subprocess with photon transverse momenta

Science.gov (United States)

Łuszczak, Marta; Schäfer, Wolfgang; Szczurek, Antoni

2018-05-01

We discuss production of W + W - pairs in proton-proton collisions induced by two-photon fusion including, for a first time, transverse momenta of incoming photons. The unintegrated inelastic fluxes (related to proton dissociation) of photons are calculated based on modern parametrizations of deep inelastic structure functions in a broad range of their arguments ( x and Q 2). In our approach we can get separate contributions of different W helicities states. Several one- and two-dimensional differential distributions are shown and discussed. The present results are compared to the results of previous calculations within collinear factorization approach. Similar results are found except of some observables such as e.g. transverse momentum of the pair of W + and W -. We find large contributions to the cross section from the region of large photon virtualities. We show decomposition of the total cross section as well as invariant mass distribution into the polarisation states of both W bosons. The role of the longitudinal F L structure function is quantified. Its inclusion leads to a 4-5% decrease of the cross section, almost independent of M WW .

Design review report: 200 East upgrades for Project W-314, tank farm restoration and safe operations

International Nuclear Information System (INIS)

Boes, K.A.

1998-01-01

This Design Review Report (DRR) documents the contractor design verification methodology and records associated with project W-314's 200 East (200E) Upgrades design package. The DRR includes the documented comments and their respective dispositions for this design. Acceptance of the comment dispositions and closure of the review comments is indicated by the signatures of the participating reviewers. Project W-314 is a project within the Tank Waste Remediation System (TWRS) Tank Waste Retrieval Program. This project provides capital upgrades for the existing Hanford tank farm waste transfer, instrumentation, ventilation, and electrical infrastructure systems. To support established TWRS programmatic objectives, the project is organized into two distinct phases. The initial focus of the project (i.e., Phase 1) is on waste transfer system upgrades needed to support the TWRS Privatization waste feed delivery system. Phase 2 of the project will provide upgrades to support resolution of regulatory compliance issues, improve tank infrastructure reliability, and reduce overall plant operating/maintenance costs. Within Phase 1 of the W-314 project, the waste transfer system upgrades are further broken down into six major packages which align with the project's work breakdown structure. Each of these six sub-elements includes the design, procurement, and construction activities necessary to accomplish the specific tank farm upgrades contained within the package. The first design package (AN Valve Pit Upgrades) was completed in November 1997, and the associated design verification activities are documented in HNF-1893. The second design package, 200 East (200E) Upgrades, was completed in March 1998. This design package identifies modifications to existing valve pits 241-AX-B and 241-A-B, as well as several new waste transfer pipelines to be constructed within the A Farm Complex of the 200E Area. The scope of the valve pit modifications includes new pit cover blocks, valve

Influência da relação estequiométrica resina/endurecedor em propriedades mecânicas de compósitos ternários hierárquicos resina - epóxi/tecido de fibra de carbono/nanotubos de carbono

Directory of Open Access Journals (Sweden)

Kássio André Lacerda

2014-01-01

Full Text Available A produção de materiais que apresentem alto desempenho em suas aplicações exige avanços tecnológicos e científicos. Os elevados valores de resistência à tração e módulo de elasticidade, aliados à flexibilidade, baixa densidade e alta razão de aspecto, fazem dos nanotubos de carbono excepcionais candidatos para reforçar compósitos poliméricos. Preparamos por laminação sistemas compósitos ternários à base de resina epóxi/tecidos de fibra de carbono (para os binários, acrescendo nanotubos de carbono para os sistemas ternários. Os parâmetros estequiométricos do sistema epoxídico (valor de Phr e concentração de nanotubos de carbono empregado nos sistemas compósitos tiveram avaliadas suas morfologias (MEV, propriedades térmicas (TG e mecânicas (ASTM D790. Embora o sistema epoxídico com Phr 10,0 tenha apresentado uma maior estabilidade térmica, os compósitos ternários produzidos a partir do sistema com Phr 26,6 mostraram valores de tensão máxima e módulo de elasticidade até 8 vezes maiores que aqueles produzidos com o sistema Phr 10. A adição de nanotubos de carbono aos compósitos com Phr 26,6 resultou em ganhos adicionais de aproximadamente 38 e 15% na tensão máxima e no módulo de elasticidade, respectivamente. Esses resultados revelaram a limitação nos métodos de integralização de nanoestruturas a sistemas compósitos, onde as dispersões estão limitadas a uma série de fatores inerentes a interação química e/ou física durante a fabricação dos compósitos nanoestruturados.

Project W-320, 241-C-106 sluicing HVAC calculations, Volume 1

International Nuclear Information System (INIS)

Bailey, J.W.

1998-01-01

This supporting document has been prepared to make the FDNW calculations for Project W-320, readily retrievable. The report contains the following calculations: Exhaust airflow sizing for Tank 241-C-106; Equipment sizing and selection recirculation fan; Sizing high efficiency mist eliminator; Sizing electric heating coil; Equipment sizing and selection of recirculation condenser; Chiller skid system sizing and selection; High efficiency metal filter shielding input and flushing frequency; and Exhaust skid stack sizing and fan sizing

Project W-320, 241-C-106 sluicing HVAC calculations, Volume 1

Energy Technology Data Exchange (ETDEWEB)

Bailey, J.W.

1998-08-07

This supporting document has been prepared to make the FDNW calculations for Project W-320, readily retrievable. The report contains the following calculations: Exhaust airflow sizing for Tank 241-C-106; Equipment sizing and selection recirculation fan; Sizing high efficiency mist eliminator; Sizing electric heating coil; Equipment sizing and selection of recirculation condenser; Chiller skid system sizing and selection; High efficiency metal filter shielding input and flushing frequency; and Exhaust skid stack sizing and fan sizing.

Systems approach to project risk management

Energy Technology Data Exchange (ETDEWEB)

Kindinger, J. P. (John P.)

2002-01-01

This paper describes the need for better performance in the planning and execution of projects and examines the capabilities of two different project risk analysis methods for improving project performance. A quantitative approach based on concepts and tools adopted from the disciplines of systems analysis, probabilistic risk analysis, and other fields is advocated for managing risk in large and complex research & development projects. This paper also provides an overview of how this system analysis approach for project risk management is being used at Los Alamos National Laboratory along with examples of quantitative risk analysis results and their application to improve project performance.

Phase V storage (Project W-112) Central Waste Complex operational readiness review, final report

International Nuclear Information System (INIS)

Wight, R.H.

1997-01-01

This document is the final report for the RFSH conducted, Contractor Operational Readiness Review (ORR) for the Central Waste Complex (CWC) Project W-112 and Interim Safety Basis implementation. As appendices, all findings, observations, lines of inquiry and the implementation plan are included

Phase 5 storage (Project W-112) Central Waste Complex operational readiness review, final report

Energy Technology Data Exchange (ETDEWEB)

Wight, R.H.

1997-05-30

This document is the final report for the RFSH conducted, Contractor Operational Readiness Review (ORR) for the Central Waste Complex (CWC) Project W-112 and Interim Safety Basis implementation. As appendices, all findings, observations, lines of inquiry and the implementation plan are included.

Pico-level DNA sensing by hetero-polymetalate, Na10{Dy2W10O30(µ-S)6}·80H2O, cluster

Science.gov (United States)

Dutta, Taposhree; Ganguly, Jhuma; Sarkar, Sabyasachi

2018-04-01

The polyoxometalate dysprosium cluster, (Dy-S-W POM) , Na10[Dy2W10O30(µ-S)6]·80H2O, shows remarkable dsDNA denaturation property. In the presence of 0.22 µmol of this Dy-S-W POM, the melting temperature (Tm) of calf-thymus (CT) dsDNA is decreased to 62.35 °C. Dy-S-W POM shows bleaching of methylene blue (MB). Addition of CT-DNA in the MB bleached solution of Dy-S-W POM apparently intercalates MB. Such trapped MB by CT-DNA responds to its re-oxidation by elemental sulfur formed in the bleaching process involving Dy-S-W POM. This reduction-oxidation property of MB with Dy-S-W POM led to the detection of pico (13.20 pmol) level of DNA even by naked eye, which will be helpful for rapid trace DNA detection in forensic science and DNA-related diagnostics, complimenting time-consuming sophisticated methodology.

PROJECT W-551 DETERMINATION DATA FOR EARLY LAW INTERIM PRETREATMENT SYSTEM SELECTION

Energy Technology Data Exchange (ETDEWEB)

TEDESCHI AR

2008-08-11

This report provides the detailed assessment forms and data for selection of the solids separation and cesium separation technology for project W-551, Interim Pretreatment System. This project will provide early pretreated low activity waste feed to the Waste Treatment Plant to allow Waste Treatment Plan Low Activity Waste facility operation prior to construction completion of the Pretreatment and High Level Waste facilities. The candidate solids separations technologies are rotary microfiltration and crossflow filtration, and the candidate cesium separation technologies are fractional crystallization, caustic-side solvent extraction, and ion-exchange using spherical resorcinol-formaldehyde resin. This data was used to prepare a cross-cutting technology summary, reported in RPP-RPT-37740.

Project W-519 CDR supplement: Raw water and electrical services for privatization contractor, AP tank farm operations

International Nuclear Information System (INIS)

Parazin, R.J.

1998-01-01

This supplement to the Project W-519 Conceptual Design will identify a means to provide RW and Electrical services to serve the needs of the TWRS Privatization Contractor (PC) at AP Tank Farm as directed by DOE-RL. The RW will serve the fire suppression and untreated process water requirements for the PC. The purpose of this CDR supplement is to identify Raw Water (RW) and Electrical service line routes to the TWRS Privatization Contractor (PC) feed delivery tanks, AP-106 and/or AP-108, and establish associated cost impacts to the Project W-519 baseline

Environmental Restoration Disposal Facility (Project W-296) Safety Assessment

International Nuclear Information System (INIS)

Armstrong, D.L.

1994-08-01

This Safety Assessment is based on information derived from the Conceptual Design Report for the Environmental Restoration Disposal Facility (DOE/RL 1994) and ancillary documentation developed during the conceptual design phase of Project W-296. The Safety Assessment has been prepared to support the Solid Waste Burial Ground Interim Safety Basis document. The purpose of the Safety Assessment is to provide an evaluation of the design to determine if the process, as proposed, will comply with US Department of Energy (DOE) Limits for radioactive and hazardous material exposures and be acceptable from an overall health and safety standpoint. The evaluation considered affects on the worker, onsite personnel, the public, and the environment

Environmental Restoration Disposal Facility (Project W-296) Safety Assessment

Energy Technology Data Exchange (ETDEWEB)

Armstrong, D.L.

1994-08-01

This Safety Assessment is based on information derived from the Conceptual Design Report for the Environmental Restoration Disposal Facility (DOE/RL 1994) and ancillary documentation developed during the conceptual design phase of Project W-296. The Safety Assessment has been prepared to support the Solid Waste Burial Ground Interim Safety Basis document. The purpose of the Safety Assessment is to provide an evaluation of the design to determine if the process, as proposed, will comply with US Department of Energy (DOE) Limits for radioactive and hazardous material exposures and be acceptable from an overall health and safety standpoint. The evaluation considered affects on the worker, onsite personnel, the public, and the environment.

Managing projects a team-based approach

CERN Document Server

Brown, Karen A

2010-01-01

Students today are likely to be assigned to project teams or to be project managers almost immediately in their first job. Managing Projects: A Team-Based Approach was written for a wide range of stakeholders, including project managers, project team members, support personnel, functional mangers who provide resources for projects, project customers (and customer representatives), project sponsors, project subcontractors, and anyone who plays a role in the project delivery process. The need for project management is on the rise as product life cycles compress, demand for IT systems increases, and business takes on an increasingly global character. This book adds to the project management knowledge base in a way that fills an unmet need—it shows how teams can apply many of the standard project management tools, as well as several tools that are relatively new to the field. Managing Projects: A Team-Based Approach offers the academic rigor found in most textbooks along with the practical attributes often foun...

Test report for run-in acceptance testing of Project W-151 300 HP mixing pumps

International Nuclear Information System (INIS)

Berglin, B.G.

1998-01-01

This report documents the results of a performance demonstration and operational checkout of three 300 HP mixer pumps in accordance with WHC-SD-WI51-TS-001 ''Mixer Pump Test Specification for Project W-151'' and Statement of Work 8K520-EMN-95-004 ''Mixer Pump Performance Demonstration at MASF'' in the 400 Area Maintenance and Storage Facility (MASF) building. Testing of the pumps was performed by Fast Flux Test Facility (FFTF) Engineering and funded by the Tank Waste Remediation System (TWRS) Project W-151. Testing began with the first pump on 04-01-95 and ended with the third pump on 11-01-96. Prior to testing, the MASF was modified and prepared to meet the pump testing requirements set forth by the Test Specification and the Statement of Work

Project W-151 flexible receiver radiation detector system acceptance test plan. Revision 1

International Nuclear Information System (INIS)

Troyer, G.L.

1994-01-01

The attached document is the Acceptance Test Plan for the portion of Project W-151 dealing with acceptance of gamma-ray detectors and associated electronics manufactured at the Idaho National Engineering Laboratory (INEL). The document provides a written basis for testing the detector system, which will take place in the 305 building (300 Area)

RISK MANAGEMENT APPROACHES AND PRACTICES IN IT PROJECTS

Directory of Open Access Journals (Sweden)

BRANDAS Claudiu

2012-07-01

Full Text Available Risk is identified in project management literature as an important factor influencing IT projects success, and it is relevant for both academic and practitionersn#8217; communities. The paper presents the past and current approaches to risk management in IT projects. The objective of this paper is to compare the different approaches and relate them to existing practices. Project management literature and practice have brought different approaches to risk management, and as a result, many projects ended in failure. We present how risk management is considered in the literature, and we compare the main two approaches: the evaluation approach and the management approach. The contingency approach does not consider risk management to be a specific process as it is an embedded process in the other project management processes. Then, we present the main practices in risk management. The methodology applied is based on documentary study review and analysis of the concepts used by the literature. We analyzed the literature published between 1978 and 2011 from the main journals for IT project management and found out that the essence of project management is risk management. The risk management practices have a considerable influence on stakeholdersn#8217; perception of project success. But, regardless of the chosen approach, a standard method for identifying, assessing, and responding to risks should be included in any project as this influences the outcome of the project.

Hexavalent Chrome Free Coatings for Electronics; Electromagnetic Interference (EMI) Shielding Effectiveness (SE)

Science.gov (United States)

Kessel, Kurt R.

2014-01-01

The purpose of this testing is to determine the suitability of trivalent chromium conversion coatings that meet the requirements of MIL-DTL-5541, Type II, for use in applications where high-frequency electrical performance is important. This project will evaluate the ability of coated aluminum to form adequate EMI seals. Testing will assess performance of the trivalent chromium coatings against the known control hexavalent chromium MIL-DTL-5541 Type I Class 3 before and after they have been exposed to a set of environmental conditions. Performance will be assessed by evaluating shielding effectiveness (SE) test data from a variety of test samples comprised of different aluminum types and/or conversion coatings.

Project W-314 performance mock-up test procedure

International Nuclear Information System (INIS)

CARRATT, R.T.

1999-01-01

The purpose of this Procedure is to assist construction in the pre-operational fabrication and testing of the pit leak detection system and the low point drain assembly by: (1) Control system testing of the pit leak detection system will be accomplished by actuating control switches and verifying that the control signal is initiated, liquid testing and overall operational requirements stated in HNF-SD-W314-PDS-003, ''Project Development Specification for Pit Leak Detection''. (2) Testing of the low point floor drain assembly by opening and closing the drain to and from the ''retracted'' and ''sealed'' positions. Successful operation of this drain will be to verify that the seal does not leak on the ''sealed'' position, the assembly holds liquid until the leak detector actuates and the assembly will operate from on top of the mock-up cover block

Project W-441 cold vacuum drying facility design requirements document

International Nuclear Information System (INIS)

O'Neill, C.T.

1997-01-01

This document has been prepared and is being released for Project W-441 to record the design basis for the design of the Cold Vacuum Drying Facility. This document sets forth the physical design criteria, Codes and Standards, and functional requirements that were used in the design of the Cold Vacuum Drying Facility. This document contains section 3, 4, 6, and 9 of the Cold Vacuum Drying Facility Design Requirements Document. The remaining sections will be issued at a later date. The purpose of the Facility is to dry, weld, and inspect the Multi-Canister Overpacks before transport to dry storage

La transmission efficace des compétences via Internet : exemple pratique

NARCIS (Netherlands)

Caniëls, M.C.J.

2005-01-01

Les universités sont de plus en plus nombreuses à adopter des modèles pédagogiques novateurs, plutôt axés sur le développement des compétences que sur la reproduction des connaissances. Ces nouveaux modèles pédagogiques soulignent l’importance de la mise en application des connaissances et du

CompTIA A+ certification all-in-one for dummies

CERN Document Server

Clarke, Glen E

2012-01-01

Comprehensive coverage of everything you must know to pass CompTIA's A+ exam A+ is the gateway certification into many IT careers, and interest in certification is exploding. This bestselling A+ certification guide is updated to cover the new A+ exam. It includes the new Windows coverage and reflects the revised emphasis on objectives. Nine minibooks focus individually on specific hardware and OS characteristics including installation and configuration, diagnostics, preventive maintenance, motherboard and processors, printers, networking, and fundamentals. A companion website contains the popu

Operational test report - Project W-320 cathodic protection systems

International Nuclear Information System (INIS)

Bowman, T.J.

1998-01-01

Washington Administrative Code (WAC) 173-303-640 specifies that corrosion protection must be designed into tank systems that treat or store dangerous wastes. Project W-320, Waste Retrieval Sluicing System (WRSS), utilizes underground encased waste transfer piping between tanks 241-C-106 and 241-AY-102. Corrosion protection is afforded to the encasements of the WRSS waste transfer piping through the application of earthen ionic currents onto the surface of the piping encasements. Cathodic protection is used in conjunction with the protective coatings that are applied upon the WRSS encasement piping. WRSS installed two new two rectifier systems (46 and 47) and modified one rectifier system (31). WAC 173-303-640 specifies that the proper operation of cathodic protection systems must be confirmed within six months after initial installation. The WRSS cathodic protection systems were energized to begin continuous operation on 5/5/98. Sixteen days after the initial steady-state start-up of the WRSS rectifier systems, the operational testing was accomplished with procedure OTP-320-006 Rev/Mod A-0. This operational test report documents the OTP-320-006 results and documents the results of configuration testing of integrated piping and rectifier systems associated with the W-320 cathodic protection systems

Development of a 10 kW PEM fuel cell for stationary applications

Energy Technology Data Exchange (ETDEWEB)

Barthels, H.; Mergel, J.; Oetjen, H.F. [Institute fuer Energieverfahrenstechnik (IEV), Juelich (Germany)] [and others

1996-12-31

A 10 kW Proton Exchange Membrane Fuel Cell (PEMFC) is being developed as part of a long-term energy storage path for electricity in the photovoltaic demonstration plant called PHOEBUS at the Forschungszentrum Julich.

Tank waste remediation system privatization phase I infrastructure, project W-519, Quality Assurance implementation plan

International Nuclear Information System (INIS)

HUSTON, J.J.

1999-01-01

This document has been prepared to identify the quality requirements for all products/activities developed by or for Project W-519. This plan is responsive to the Numatec Hanford Corporation, Quality Assurance Program Plan, NHC-MP-001

10-kW-class YAG laser application for heavy components

Science.gov (United States)

Ishide, Takashi; Tsubota, S.; Nayama, Michisuke; Shimokusu, Yoshiaki; Nagashima, Tadashi; Okimura, K.

2000-02-01

The authors have put the YAG laser of the kW class to practical use for repair welding of nuclear power plant steam generator heat exchanger tubes, all-position welding of pipings, etc. This paper describes following developed methods and systems of high power YAG laser processing. First, we apply the 6 kW to 10 kW YAG lasers for welding and cutting in heavy components. The beam guide systems we have used are optical fibers which core diameter is 0.6 mm to 0.8 mm and its length is 200 m as standard one. Using these system, we can get the 1 pass penetration of 15 mm to 20 mm and multi pass welding for more thick plates. Cutting of 100 mm thickness plate data also described for dismantling of nuclear power plants. In these systems we carried out the in-process monitoring by using CCD camera image processing and monitoring fiber which placed coaxial to the YAG optical lens system. In- process monitoring by the monitoring fiber, we measured the light intensity from welding area. Further, we have developed new hybrid welding with the TIG electrode at the center of lens for high power. The hybrid welding with TIG-YAG system aims lightening of welding groove allowances and welding of high quality. Through these techniques we have applied 7 kW class YAG laser for welding in the components of nuclear power plants.

Application of polyaniline dispersions by means of screen printing

Czech Academy of Sciences Publication Activity Database

Držková, M.; Peřinka, N.; Hajná, Milena; Kaplanová, M.; Stejskal, Jaroslav

2013-01-01

Roč. 19, č. 2013 (2013), s. 257-268 ISSN 1211-5541 R&D Projects: GA TA ČR TE01020022 Institutional support: RVO:61389013 Keywords : polyaniline * colloids * screen printing Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering

Supplmental design requirements document enhanced radioactive and mixed waste storage: Phase 5, Project W-113

International Nuclear Information System (INIS)

Ocampo, V.P.

1994-11-01

This Supplemental Design Requirements Document (SDRD) is used to communicate Project W-113 specific plant design information from Westinghouse Hanford Company (WHC) to the United States Department of Energy (DOE) and the cognizant Architect Engineer (A/E). The SDRD is prepared after the completion of the project Conceptual Design report (CDR) and prior to the initiation of definitive design. Information in the SDRD serves two purposes: to convey design requirements that are too detailed for inclusion in the Functional Design Criteria (FDC) report and to serve as a means of change control for design commitments in the Title I and Title II design. The Solid Waste Retrieval Project (W-113) SDRD has been restructured from the equipment based outline used in previous SDRDs to a functional systems outline. This was done to facilitate identification of deficiencies in the information provided in the initial draft SDRD and aid design confirmation. The format and content of this SDRD adhere as closely as practicable to the requirements of WHC-CM-6-1, Standard Engineering Practices for Functional Design Criteria

Do cosmological data rule out f (R ) with w ≠-1 ?

Science.gov (United States)

Battye, Richard A.; Bolliet, Boris; Pace, Francesco

2018-05-01

We review the equation of state (EoS) approach to dark sector perturbations and apply it to f (R ) gravity models of dark energy. We show that the EoS approach is numerically stable and use it to set observational constraints on designer models. Within the EoS approach we build an analytical understanding of the dynamics of cosmological perturbations for the designer class of f (R ) gravity models, characterized by the parameter B0 and the background equation of state of dark energy w . When we use the Planck cosmic microwave background temperature anisotropy, polarization, and lensing data as well as the baryonic acoustic oscillation data from SDSS and WiggleZ, we find B0<0.006 (95% C.L.) for the designer models with w =-1 . Furthermore, we find B0<0.0045 and |w +1 |<0.002 (95% C.L.) for the designer models with w ≠-1 . Previous analyses found similar results for designer and Hu-Sawicki f (R ) gravity models using the effective field theory approach [Raveri et al., Phys. Rev. D 90, 043513 (2014), 10.1103/PhysRevD.90.043513; Hu et al., Mon. Not. R. Astron. Soc. 459, 3880 (2016), 10.1093/mnras/stw775]; therefore this hints for the fact that generic f (R ) models with w ≠-1 can be tightly constrained by current cosmological data, complementary to solar system tests [Brax et al., Phys. Rev. D 78, 104021 (2008), 10.1103/PhysRevD.78.104021; Faulkner et al., Phys. Rev. D 76, 063505 (2007), 10.1103/PhysRevD.76.063505]. When compared to a w CDM fluid with the same sound speed, we find that the equation of state for f (R ) models is better constrained to be close to -1 by about an order of magnitude, due to the strong dependence of the perturbations on w .

Invention de soi et compétences à l’ère des réseaux sociaux

Directory of Open Access Journals (Sweden)

Daniel Apollon

2011-06-01

Full Text Available Les réseaux sociaux en ligne encouragent de nouvelles approches de la compétence centrées sur la construction biographique de l’individu et l’invention de soi. Ce nouvel art de faire des « produsagers », répond au besoin d’inventer une réponse individuelle et collective au sentiment aliénant de vacuité des sociétés post-industrielles et post-traditionnelles. Combinant opposition et soumission aux éléments structurants et aliénants de cette modernité tardive, ces produsagers réactualisent diverses ruses, tactiques et schèmes immémoriaux déjà explorés par divers auteurs avant Internet. Sur cette toile de fond, l’auteur propose une réinterprétation plus large de la notion de compétence.Social media practices encourage new approaches and visions of competence focusing on the construction of individual biography and the "invention of oneself". The new "artful skills" of "produsers" address the need to invent individual and collective responses to the sense of alienating emptiness pervading postindustrial and posttraditional societies. Combining and submission and opposition to both structuring and alienating aspects of late modernity, these produsagers actualize various tricks, tactics and immemorial schemes already mapped by various authors before the Internet. On this backdrop the author proposes a broader reinterpretation of the concept of competence.

Effect of light curing tip distance and resin shade on microhardness of a hybrid resin composite Efeito da distância da ponta do aparelho de fotoativação e da cor na microdureza superficial de um compósito híbrido

Directory of Open Access Journals (Sweden)

Flávio Henrique Baggio Aguiar

2005-12-01

Full Text Available Resin composite shades and resin composite polymerization performed with a distanced light tip are factors that can affect polymerization effectiveness. Thisin vitro study aimed to evaluate the influence of curing tip distance and resin shade on the microhardness of a hybrid resin composite (Z250 - 3M ESPE. Forty-five resin composite specimens were randomly prepared and divided into nine experimental groups (n = 5: three curing tip distances (2 mm, 4 mm, and 8 mm and three resin shades (A1, A3.5, and C2. All samples were polymerized with a continuous output at 550 mW/cm². After 24 hours, Knoop microhardness measurements were obtained on the top and bottom surfaces of the sample, with a load of 25 grams for 10 seconds. Five indentations were performed on each surface of each sample. Results showed that bottom surface samples light-cured at 2 mm and 4 mm presented significantly higher hardness values than samples light-cured at 8 mm. The resin shade A1 presented higher hardness values and was statistically different from C2. The resin shade A3.5 did not present statistical differences from A1 and C2. For the top surface, there were no statistical differences among the curing tip distances. For all experimental conditions, the top surface showed higher hardness values than the bottom surface. It was concluded that light curing tip distance and resin shade are important factors to be considered for obtaining adequate polymerization.A cor do compósito e a polimerização realizada com a ponta do aparelho de fotoativação distante da superfície do compósito são fatores que podem afetar a efetividade de polimerização. Assim, o objetivo deste estudo in vitro foi avaliar a influência desses fatores na microdureza superficial de um compósito híbrido (Z250 - 3M ESPE. Quarenta e cinco espécimes de compósito foram aleatoriamente preparados de acordo com os nove grupos experimentais (n = 5: três distâncias de fotoativação (2 mm, 4 mm e 8 mm e

Conceptual design statement of work for the immobilized low-activity waste disposal facility, project W-520

International Nuclear Information System (INIS)

Pickett, W.W.

1998-01-01

This Statement of Work outlines the deliverables and schedule for preparation of the Project W-520 Conceptual Design Report, including, work plans, site development plan, preliminary safety evaluation, and conceptual design

The 10 bar hydrogen time projection chamber of the MuCap experiment

Energy Technology Data Exchange (ETDEWEB)

Egger, Johny [Paul Scherrer Institute, Olga/019, CH - 5232 Villigen PSI (Switzerland); Hildebrandt, Malte, E-mail: malte.hildebrandt@psi.c [Paul Scherrer Institute, Olga/019, CH - 5232 Villigen PSI (Switzerland); Petitjean, Claude [Paul Scherrer Institute, Olga/019, CH - 5232 Villigen PSI (Switzerland)

2011-02-01

The experimental goal of the MuCap experiment at the Paul Scherrer Institute (PSI) is a high-precision measurement of the singlet capture rate of the nuclear muon capture on the free proton in the reaction {mu}{sup -}+p{yields}n+{nu}{sub {mu}.} The measuring principle is a lifetime measurement whereas the experimental approach is based on a specially developed Time Projection Chamber (TPC) operating with ultra-pure and deuterium-depleted hydrogen gas at a pressure of 10 bar. The TPC acts as an active muon stop detector and the 10 bar hydrogen operates as target and detector. Design, construction and operation of the Time Projection Chamber are presented.

Ocena występowania wad stóp u dzieci w wieku 9-10 lat w środowisku miejskim i wiejskim = Estimate the prevalence the feet defects in children aged 9-10 years in the urban and rural environment

Directory of Open Access Journals (Sweden)

Anna Plaskiewicz

2015-04-01

3 Wydział Kultury Fizycznej, Zdrowia i Turystyki, Uniwersytet Kazimierza Wielkiego w Bydgoszczy   Streszczenie   Wstęp. Wady stóp u dzieci są powszechnym problemem medyczno–społecznym w Polsce i na Świecie. Styl i szybkie tempo życia współczesnego człowieka wpływają niekorzystnie na postawę ciała, a stopy są szczególnie narażone na niekorzystny wpływ działania czynników środowiska zewnętrznego. Cel pracy. Celem pracy jest ocena występowania wad stóp u dzieci w wieku 9-10 lat w środowisku miejskim i wiejskim. Materiał i metody. Badaniami objęto grupę 40 dzieci w wieku 9-10 lat. Ze względu na miejsce zamieszkania dzieci podzielono na dwie grupy. Analizę stóp wykonano metodą platurograficzną polegającą na sporządzeniu odcisków podporowej powierzchni stopy. Oceniano wskaźniki opisujące wady stóp tj: wskaźnik „Ky” Sztritera-Godunowa, wskaźnik kątowy Clarke’a (CI, wskaźnik Wejsfloga, kąt piętowy oraz kąt koślawości palucha. Wyniki. Wśród przebadanych dzieci najczęstszą wadą stóp było płaskostopie. Zaobserwowano minimalnie mniej wad stóp u dzieci ze wsi w porównaniu z dziećmi mieszkającymi w mieście, jednak różnice nie są istotne statystycznie. Nie zaobserwowano różnic związanych z występowaniem wad stóp pomiędzy dziećmi ze wsi i z miasta. Wnioski. 1. Większość dzieci zarówno z miasta (65% jak i ze wsi (75% ma prawidłowo ukształtowane stopy. 2. Najczęstszą wadą stóp występującą wśród przebadanych dzieci jest płaskostopie. 3. Nie zaobserwowano istotnych różnic statystycznych w ocenie stóp pomiędzy dziećmi mieszkającymi w środowisku miejskim i wiejskim.   Abstract   Introduction. Feet defects in children is a common socio-medical problem in Poland and the world. Lifestyle of modern man adversely affect posture. The feet are particularly vulnerable to the adverse effects factors the external environment. Aim of the study. The aim of the study is to estimate the

PROJECT W-551 INTERIM PRETREATMENT SYSTEM TECHNOLOGY SELECTION SUMMARY DECISION REPORT AND RECOMMENDATION

International Nuclear Information System (INIS)

CONRAD EA

2008-01-01

This report provides the conclusions of the tank farm interim pretreatment technology decision process. It documents the methodology, data, and results of the selection of cross-flow filtration and ion exchange technologies for implementation in project W-551, Interim Pretreatment System. This selection resulted from the evaluation of specific scope criteria using quantitative and qualitative analyses, group workshops, and technical expert personnel

Nonradioactive air emissions notice of construction, Project W-320, 241-C-106 tank sluicing

International Nuclear Information System (INIS)

Hays, C.B.

1998-01-01

This document serves as a Notice of Construction for the Phase 2 activities of Project W-320, 241-C-106 Tank Sluicing, pursuant to the requirements of Washington Administrative Codes (WAC) 173-400 and 173-460. Phased permitting for Project W-320 was discussed with the Washington State Department of Ecology (Ecology) on November 2, 1993. In April 1994, it was deemed unnecessary because the Phase 1 activities did not constitute a new source of emissions and therefore did not require approval from Ecology. The 241-C-106 tank is a 2-million liter capacity, single-shell tank (SST) used for radioactive waste storage since 1947. Between mid-1963 and mid-1969, 241-C-106 tank received high-heat waste, PUREX (plutonium-uranium extraction) Facility high-level waste, and strontium-bearing solids from the strontium and cesium recovery activities. In 1971, temperatures exceeding 99 C were observed in the tank, and therefore, a ventilation system was installed to cool the tank. In addition, approximately 22,712 liters of cooling water are added to the tank each month to prevent the sludge from drying out and overheating. Excessive drying of the sludge could result in possible structural damage. The current radiolytic heat generation rate has been calculated at 32 kilowatts (kW) plus or minus 6 kW. The 241-C-106 tank was withdrawn from service in 1979 and currently is categorized as not leaking. The heat generation in 241-C-106 tank has been identified as a key safety issue on the Hanford Site. The evaporative cooling provided by the added water during operation and/or sluicing maintains the 241-C-106 tank within its specified operating temperature limits. Project W-320, 241-C-106 Tank Sluicing, will mobilize and remove the heat-generating sludge, allowing the water additions to cease. Following sludge removal, the 241-C-106 tank could be placed in a safe, interim stabilized condition. Tank-to-tank sluicing, an existing, proven technology, will provide the earliest possible

Nonradioactive air emissions notice of construction, Project W-320, 241-C-106 tank sluicing

Energy Technology Data Exchange (ETDEWEB)

Hays, C.B.

1998-01-28

This document serves as a Notice of Construction for the Phase 2 activities of Project W-320, 241-C-106 Tank Sluicing, pursuant to the requirements of Washington Administrative Codes (WAC) 173-400 and 173-460. Phased permitting for Project W-320 was discussed with the Washington State Department of Ecology (Ecology) on November 2, 1993. In April 1994, it was deemed unnecessary because the Phase 1 activities did not constitute a new source of emissions and therefore did not require approval from Ecology. The 241-C-106 tank is a 2-million liter capacity, single-shell tank (SST) used for radioactive waste storage since 1947. Between mid-1963 and mid-1969, 241-C-106 tank received high-heat waste, PUREX (plutonium-uranium extraction) Facility high-level waste, and strontium-bearing solids from the strontium and cesium recovery activities. In 1971, temperatures exceeding 99 C were observed in the tank, and therefore, a ventilation system was installed to cool the tank. In addition, approximately 22,712 liters of cooling water are added to the tank each month to prevent the sludge from drying out and overheating. Excessive drying of the sludge could result in possible structural damage. The current radiolytic heat generation rate has been calculated at 32 kilowatts (kW) plus or minus 6 kW. The 241-C-106 tank was withdrawn from service in 1979 and currently is categorized as not leaking. The heat generation in 241-C-106 tank has been identified as a key safety issue on the Hanford Site. The evaporative cooling provided by the added water during operation and/or sluicing maintains the 241-C-106 tank within its specified operating temperature limits. Project W-320, 241-C-106 Tank Sluicing, will mobilize and remove the heat-generating sludge, allowing the water additions to cease. Following sludge removal, the 241-C-106 tank could be placed in a safe, interim stabilized condition. Tank-to-tank sluicing, an existing, proven technology, will provide the earliest possible

Development of Si–W transient tolerant plasma facing material

Energy Technology Data Exchange (ETDEWEB)

Wong, C.P.C., E-mail: wongc@fusion.gat.com [General Atomics, PO Box 85608, San Diego, CA 92186-5608 (United States); Chen, B. [General Atomics, PO Box 85608, San Diego, CA 92186-5608 (United States); Hollmann, E.M.; Rudakov, D.L. [University of California, San Diego, 9500 Gilman Dr., La Jolla, CA 92093-0417 (United States); Wall, D.; Tao, R. [General Atomics, PO Box 85608, San Diego, CA 92186-5608 (United States); Wright, M. [Ultramet, 12173 Montague Street, Pacoima, CA 91331 (United States)

2013-07-15

Solid W is projected as the preferred plasma facing material. Unfortunately, W surfaces could suffer radiation damage under DT operation and will melt under Type-I edge localized modes and disruption events. A possible approach is the use of a low-Z sacrificial material, like Si deposited on the W-surface to withstand a few type-I ELMs and/or disruptions via the vapor shielding effect. Accordingly, sets of Si–W test buttons were fabricated and exposed in the DIII-D lower divertor. We found that when the Si–W buttons were exposed to a few DIII-D vertical displacement event disruptions, tungsten–silicide was formed which melts at 1414 °C. This clearly indicates that the Si–W combination cannot be used as a transient tolerance surface material, since the W surface can be damaged. Even when Si is used as a wall conditioning material the Si–W surface temperature should be operated at much lower than 1400 °C.

Crosslinking of epoxy-polysiloxane system by reactive blending

Czech Academy of Sciences Publication Activity Database

Gonzales, M.; Kadlec, Petr; Štěpánek, Petr; Strachota, Adam; Matějka, Libor

2004-01-01

Roč. 45, č. 16 (2004), s. 5533-5541 ISSN 0032-3861 R&D Projects: GA AV ČR IAA4050008 Keywords : reactive blending * siloxane network * epoxy network Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.433, year: 2004

Intelligence économique, compétitivité et cohésion sociale

Directory of Open Access Journals (Sweden)

Luc Marie Quoniam

2005-12-01

Full Text Available Book review: Intelligence économique, compétitivité et cohésion sociale by Bernard Carayon (.pdf rapportPublished by: Ministère de l’Intérieur français Année d'édition : 2003 Réf. : 9782110054913, 176 pages, 21x29,7 cm ISBN : 2-11-005491-3

Estudos das propriedades mecânicas e térmicas do polímero biodegradável poli-3-hidroxibutirato (PHB) e de compósitos PHB/pó de madeira.

OpenAIRE

Miriam Lúcia Chiquetto Machado

2008-01-01

O objetivo deste trabalho foi o estudo das propriedades mecânicas e térmicas do PHB e de compósitos de PHB/pó de madeira processados, reprocessados e irradiados. Foram preparados compósitos com PHB e pó de madeira com concentrações de PHB/pó de madeira de 90/10, 80/20 e 70/30 (m/m). Foram realizados ensaios de propriedades mecânicas, HDT, ponto de amolecimento Vicat, TGA e DSC. A incorporação do pó de madeira aumentou o grau de cristalinidade e a temperatura de cristalização do polímero, e no...

Developing Consensus on the CompHP Professional Standards for Health Promotion in Europe

Science.gov (United States)

Speller, Viv; Parish, Richard; Davison, Heather; Zilnyk, Anna

2012-01-01

Building on the CompHP Core Competencies for health promotion the Professional Standards for Health Promotion have been developed and consulted on across Europe. The standards were formulated to fit within the complexity of professional, occupational and educational standards frameworks in Europe as learning outcome standards with performance…

ECRH and W7-X: An intriguing pair

Science.gov (United States)

Erckmann, V.; Braune, H.; Gantenbein, G.; Jelonnek, J.; Kasparek, W.; Laqua, H. P.; Lechte, C.; Marushchenko, N. B.; Michel, G.; Plaum, B.; Thumm, M.; Weissgerber, M.; Wolf, R.; W7-X ECRH Teams

2014-02-01

The construction of the W7-X basic machine is almost completed and the device is approaching the commissioning phase. W7-X operation will be supported by ECRH working at 140 GHz in 2nd harmonic X- or O-mode with 10 MW cw power. Presently the activities at W7-X concentrate on the implementation of wall-armour, in-vessel components and diagnostics. The ECRH-system is in stand by with 5 out of 10 gyrotrons operational. The status of both, the W7-X device and the ECRH system is reported. Further R&D activities concentrate on extending the launching capability for sophisticated confinement investigations with remote steering launchers in a poloidal plane with weak magnetic field gradient.

Four Approaches to Project Evaluation

DEFF Research Database (Denmark)

Laursen, Markus; Svejvig, Per; Rode, Anna Le Gerstrøm

. Each of the framework’s four approaches provides a distinct evaluation that sheds light on some issues while leaving others unattended. Following these lines, the paper calls for more multi-faceted project evaluations. Introducing a framework that can help analyze existing evaluations and structure......There are many theoretical and practical reasons for evaluating projects – including explorative arguments focusing on expanding descriptive knowledge on project work as well as normative arguments focusing on improving prescriptive models of project performance. Despite the need for project...... management methodologies that work and combat project failure, and research methods that can assess effective project management and methodologies, as well as empirical research on the actuality of projects as practice, evaluation research on projects including project management and methodologies is scarce...

The Integration of SME'S into Fusion Projects - Especially for the Manufacturing of Components for W7-X

International Nuclear Information System (INIS)

Heyn, K.; Scheller, H.; Andersson, H.

2006-01-01

The Consortium of Babcock Noell in Wuerzburg (Germany) and Ansaldo Superconduttori in Genoa (Italy) is producing the 50 nonplanar superconducting coils for the W7-X project. For the realization of the W7-X coils, especially for the manufacturing of the different components, an international network of companies is used, among them several SME's: highly specialized small and medium size enterprises. One of these SME's, which surpassed itself, is the Swedish foundry oesterby Gjuteri AB which has produced the stainless steel coil casings for W7-X. The design of the SS casings was changed by the customer after placing the contact. This has caused the question to manufacture the halfrings with cast segments or as entire castings, which lead finally to the contact with oesterby. A lot of effort was necessary to design the 10 different patterns for the 5 types of casings each consisting of 2 halfrings. The qualification of the SS grade for the high requirements of the project, among them the low cobalt content or the required mechanical properties at 4 K needed some time. Further on a lot of investigations about the test procedures were necessary to be applied for the special geometry of the product, for the 3D measurements or the NDT. The conventional x-ray was not completely suitable for this product due to the thickness of the material in some areas. The main production steps for each halfring will be presented in the paper. The testing includes different NDT, the material tests at RT and 4 K and the 3D measurement. The first casing was delivered end of 2001 and the last in autumn 2005 after several unexpected interruptions. All were treated in a close contact with the customer and in good collaboration between oesterby and BNG and have lead to a significant increase of competence on both sides. Several other SME's are involved in the network for W7-X realization. There are for example: C-CON in Rottenburg and its subcontractors PEM and KUKA in Schwarzenberg for Final

Characterization of Vadose Zone Sediments Below the T Tank Farm: Boreholes C4104, C4105, 299-W10-196, and RCRA Borehole 299-W11-39

Energy Technology Data Exchange (ETDEWEB)

Serne, R. Jeffrey; Bjornstad, Bruce N.; Horton, Duane G.; Lanigan, David C.; Schaef, Herbert T.; Lindenmeier, Clark W.; Lindberg, Michael J.; Clayton, Ray E.; Legore, Virginia L.; Geiszler, Keith N.; Baum, Steven R.; Valenta, Michelle M.; Kutnyakov, Igor V.; Vickerman, Tanya S.; Orr, Robert D.; Brown, Christopher F.

2008-09-11

This report was revised in September 2008 to remove acid-extractable sodium data from Tables 4.8, 4.28, and 4.52. The sodium data was removed due to potential contamination introduced during the acid extraction process. The rest of the text remains unchanged from the original report issued in September 2004. The overall goal of the Tank Farm Vadose Zone Project, led by CH2M HILL Hanford Group, Inc., is to define risks from past and future single-shell tank farm activities at Hanford. To meet this goal, CH2M HILL Hanford Group, Inc. tasked scientists from Pacific Northwest National Laboratory to perform detailed analyses on vadose zone sediments from within Waste Management Area (WMA) T-TX-TY. This report is the second of two reports written to present the results of these analyses. Specifically, this report contains all the geologic, geochemical, and selected physical characterization data collected on vadose zone sediment recovered from boreholes C4104 and C4105 in the T Tank Farm, and from borehole 299-W-11-39 installed northeast of the T Tank Farm. Finally, the measurements on sediments from borehole C4104 are compared with a nearby borehole drilled in 1993, 299- W10-196, through the tank T-106 leak plume.

Developing a Competency-Based Pan-European Accreditation Framework for Health Promotion

Science.gov (United States)

Battel-Kirk, Barbara; Van der Zanden, Gerard; Schipperen, Marielle; Contu, Paolo; Gallardo, Carmen; Martinez, Ana; Garcia de Sola, Silvia; Sotgiu, Alessandra; Zaagsma, Miriam; Barry, Margaret M.

2012-01-01

Background: The CompHP Pan-European Accreditation Framework for Health Promotion was developed as part of the CompHP Project that aimed to develop competency-based standards and an accreditation system for health promotion practice, education, and training in Europe. Method: A phased, multiple-method approach was employed to facilitate consensus…

Functional analysis of the interdependence between DNA uptake sequence and its cognate ComP receptor during natural transformation in Neisseria species.

Directory of Open Access Journals (Sweden)

Jamie-Lee Berry

Full Text Available Natural transformation is the widespread biological process by which "competent" bacteria take up free DNA, incorporate it into their genomes, and become genetically altered or "transformed". To curb often deleterious transformation by foreign DNA, several competent species preferentially take up their own DNA that contains specific DUS (DNA uptake sequence watermarks. Our recent finding that ComP is the long sought DUS receptor in Neisseria species paves the way for the functional analysis of the DUS-ComP interdependence which is reported here. By abolishing/modulating ComP levels in Neisseria meningitidis, we show that the enhancement of transformation seen in the presence of DUS is entirely dependent on ComP, which also controls transformation in the absence of DUS. While peripheral bases in the DUS were found to be less important, inner bases are essential since single base mutations led to dramatically impaired interaction with ComP and transformation. Strikingly, naturally occurring DUS variants in the genomes of human Neisseria commensals differing from DUS by only one or two bases were found to be similarly impaired for transformation of N. meningitidis. By showing that ComPsub from the N. subflava commensal specifically binds its cognate DUS variant and mediates DUS-enhanced transformation when expressed in a comP mutant of N. meningitidis, we confirm that a similar mechanism is used by all Neisseria species to promote transformation by their own, or closely related DNA. Together, these findings shed new light on the molecular events involved in the earliest step in natural transformation, and reveal an elegant mechanism for modulating horizontal gene transfer between competent species sharing the same niche.

Towards e-Government project assessment: European approach

Directory of Open Access Journals (Sweden)

Pavel Mates

2013-06-01

Full Text Available The objective of the paper is to analyse current approaches to the assessment of e-Government projects as the specifi c public projects and to suggest how to improve these approaches in order to eliminate their shortcomings. The nonnormative theoretical methods are used to analyse empirical results of previous researches; particularly the deduction method is used to prove that current approaches to the evaluation of e-Government projects have some inequalities, the analogy and comparison methods are used to create general typology of e-Government projects and the induction method is used to seek examples of the indicators and metrics. The results are based on analysis of extensive amount of e-Government projects, which have been realized in different European countries in the past twenty years. The basic result of the research is creation of the ten most common types of e-Government projects typology. The fundamental conclusion obtained from the results of this research is that this typology can be used as the core of new E-Government General Assessment Framework, which eliminates problems of previous approaches, allows adjusting metrics and indicators to each type of projects, keeps comparability of results and thus making possible the use of benchmarking methods.

10 years of engineering and physics achievements by the Large Helical Device project

International Nuclear Information System (INIS)

Yamada, H.; Imagawa, S.; Takeiri, Y.; Kaneko, O.; Mutoh, T.; Mito, T.; Chikaraishi, H.; Hamaguchi, S.; Ida, K.; Igami, H.; Ikeda, K.; Kasahara, H.; Kobayashi, M.; Kubo, S.; Kumazawa, R.; Maekawa, R.; Masuzaki, S.; Miyazawa, J.; Morisaki, T.; Morita, S.

2009-01-01

This article reviews 10 years of engineering and physics achievements by the Large Helical Device (LHD) project with emphasis on the latest results. The LHD is the largest magnetic confinement device among diversified helical systems and employs the world's largest superconducting coils. The cryogenic system has been operated for 50,000 h in total without any serious trouble and routinely provides a confining magnetic field up to 2.96 T in steady state. The heating capability to date is 23 MW of NBI, 2.9 MW of ICRF and 2.1 MW of ECH. Negative-ion-based ion sources with the accelerating voltage of 180 keV are used for a tangential NBI with the power of 16 MW. The ICRF system has full steady-state operational capability with 1.6 MW. In these 10 years, operational experience as well as a physics database have been accumulated and the advantages of stable and steady-state features have been demonstrated by the combination of advanced engineering and the intrinsic physical advantage of helical systems in LHD. Highlighted physical achievements are high beta (5% at the magnetic field of 0.425 T), high density (1.1 x 10 21 m -3 at the central temperature of 0.4 keV), high ion temperature (T i of 5.2 keV at 1.5 x 10 19 m -3 ), and steady-state operation (3200 s with 490 kW). These physical parameters have elucidated the potential of net-current free helical plasmas for an attractive fusion reactor. It also should be pointed out that a major part of these engineering and physics achievements is complementary to the tokamak approach and even contributes directly to ITER.

30 CFR 402.10 - Research-project applications.

Science.gov (United States)

2010-07-01

... project title, project objectives, background information, research tasks, methodology to conduct the... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Research-project applications. 402.10 Section... PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Application, Evaluation, and Management...

La compétence interculturelle et la formation initiale : le point sur le CECR et l’IDI

Directory of Open Access Journals (Sweden)

Karen Olivia Ragoonaden

2011-12-01

Full Text Available Abstract Ce projet pilote traite principalement de la compétence interculturelle des étudiants en formation initiale du français langue seconde. Douze étudiants ont répondu au questionnaire de l’IDI (inventaire de développement interculturel, un outil méthodologique qui mesure les orientations concernant la différence culturelle. Les profils interculturels, calculés d’après les résultats de l’IDI, servent de toile de fond pour proposer la mise en œuvre des interventions interculturelles selon les paramètres établis par les compétences générales du Cadre européen commun de référence pour les langues (CECR. Les travaux menés pourraient contribuer à l’élaboration des cours/ateliers en compétence interculturelle, à l’intégration des savoirs socioculturels et à la prise de conscience interculturelle identifiés dans les compétences générales du Cadre européen commun de référence pour les langues dans les cours de formation initiale. Resume This pilot study focuses on the intercultural competence of preservice French as a second language (FSL teachers. The Intercultural Development Index (IDI, a statistically valid tool used to measure intercultural competence, was administered to twelve preservice candidates. These results serve as a basis to discuss the integration of intercultural competencies along the parameters established in the general competencies of the CEFR. This study has the potential to contribute to a growing area of research in the field of intercultural competence in preservice teacher education and explores how sociocultural saviors and intercultural awareness, identified by the Common European Framework of Reference for Languages, can be integrated into Teacher Education.

Alors ? méthode de français fondée sur l'approche des compétences : niveau B1 : CD et DVD inclus

CERN Document Server

Di Giura, Marcella

2008-01-01

Une nouvelle méthode qui propose des stratégies spécifiques pour l'acquisition des compétences communicatives, linguistiques et culturelles. Alors ? respecte les échelles de compétences des niveaux A1, A2 et B1 du CECRL.

1366 Project Automate: Enabling Automation for <$0.10/W High-Efficiency Kerfless Wafers Manufactured in the US

Energy Technology Data Exchange (ETDEWEB)

Lorenz, Adam [1366 Technologies, Bedford, MA (United States)

2017-05-10

For photovoltaic (PV) manufacturing to thrive in the U.S., there must be an innovative core to the technology. Project Automate builds on 1366’s proprietary Direct Wafer® kerfless wafer technology and aims to unlock the cost and efficiency advantages of thin kerfless wafers. Direct Wafer is an innovative, U.S.-friendly (efficient, low-labor content) manufacturing process that addresses the main cost barrier limiting silicon PV cost-reductions – the 35-year-old grand challenge of manufacturing quality wafers (40% of the cost of modules) without the cost and waste of sawing. This simple, scalable process will allow 1366 to manufacture “drop-in” replacement wafers for the $10 billion silicon PV wafer market at 50% of the cost, 60% of the capital, and 30% of the electricity of conventional casting and sawing manufacturing processes. This SolarMat project developed the Direct Wafer processes’ unique capability to tailor the shape of wafers to simultaneously make thinner AND stronger wafers (with lower silicon usage) that enable high-efficiency cell architectures. By producing wafers with a unique target geometry including a thick border (which determines handling characteristics) and thin interior regions (which control light capture and electron transport and therefore determine efficiency), 1366 can simultaneously improve quality and lower cost (using less silicon).

De la terre à la table : renforcer les compétences des agriculteurs ...

International Development Research Centre (IDRC) Digital Library (Canada)

De la terre à la table : renforcer les compétences des agriculteurs urbains en organisation et en mise en marché (Moyen-Orient et Afrique du Nord). Le réseau ... Stichting International Network of Resource Centres on Urban Agriculture and Food Security. Pays d' institution. Pays-Bas. Site internet. http://www.ruaf.org ...

Magnetic Measurement of the 10 kW, IR FEL Dipole Magnets

International Nuclear Information System (INIS)

Tommy Hiatt; Kenneth Baggett; J. Beck; George Biallas; David Douglas; Kevin Sullivan; C. Tennant

2003-01-01

Magnetic measurements have been performed on several families of dipoles for the 10 kW IR-FEL presently under construction at the Thomas Jefferson National Accelerator Facility. The requirements for these magnets include varying field strengths, large horizontal apertures and parts in 10,000 field homogeneity as well as setability of core and integrated field. Measurements were made to quantify the magnets according to these requirements and to determine the hysteresis protocol, ramp rate dependence, and field clamp settings that are used. This paper will describe the results of these measurements and the procedures used to accomplish them

Layout considerations on the 25GeV/300kW beam dump of the XFEL project

International Nuclear Information System (INIS)

Maslov, M.; Sychev, V.; Schmitz, M.

2006-08-01

The European X-Ray Free Electron Laser (XFEL) project, which is currently under design at DESY, requires 3 beam dumps downstream of the accelerator. By means of energy deposition, temperature and mechanical stress calculations the layout of a solid edge cooled beam dump is presented. This dump is able to withstand a high cyclic impact, as induced by each subsequent bunch train of up to 2.5.10 13 electrons in combination with a large amount of dissipated power density (∼1.8 kW/cm) coming from a beam with an average power of up to 300 kW at a variable energy up to 25 GeV. The cyclic impact is faced by using graphite as a core material in the dump and setting a lower limit for the incoming beam size at σ beam ≥2 mm. Introducing a slow (not within the bunch train) circular beam sweep answers the question of heat extraction. Alternative layouts are investigated in order to avoid active beam sweeping. Unfortunately more severe risks and disadvantages are coming along with them. That is why theses solutions are not regarded as reliable alternatives and the dump design with beam sweeping is considered to be the baseline solution, for which a technical layout is under way. (orig.)

Layout considerations on the 25GeV/300kW beam dump of the XFEL project

Energy Technology Data Exchange (ETDEWEB)

Maslov, M.; Sychev, V. [Institute for High Energy Physics (IHEP), Protvino (Russian Federation); Schmitz, M. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2006-08-15

The European X-Ray Free Electron Laser (XFEL) project, which is currently under design at DESY, requires 3 beam dumps downstream of the accelerator. By means of energy deposition, temperature and mechanical stress calculations the layout of a solid edge cooled beam dump is presented. This dump is able to withstand a high cyclic impact, as induced by each subsequent bunch train of up to 2.5.10{sup 13} electrons in combination with a large amount of dissipated power density ({approx}1.8 kW/cm) coming from a beam with an average power of up to 300 kW at a variable energy up to 25 GeV. The cyclic impact is faced by using graphite as a core material in the dump and setting a lower limit for the incoming beam size at {sigma}{sub beam}{>=}2 mm. Introducing a slow (not within the bunch train) circular beam sweep answers the question of heat extraction. Alternative layouts are investigated in order to avoid active beam sweeping. Unfortunately more severe risks and disadvantages are coming along with them. That is why theses solutions are not regarded as reliable alternatives and the dump design with beam sweeping is considered to be the baseline solution, for which a technical layout is under way. (orig.)

Progress of the 10 MW ECRH System for W7-X

International Nuclear Information System (INIS)

Michel, G.; Brand, P.; Dammertz, G.

2003-01-01

The electron cyclotron resonance heating system for the W7-X stellarator is a joint effort of the Max-Planck-Institut fuer Plasmaphysik in Greifswald, the Institut fuer Plasmaforschung Stuttgart and the Forschungszentrum Karlsruhe under the supervision of the latter. Currently it is being constructed at the Greifswald branch of IPP. It will consist of 10 gyrotrons (each with 1 MW 140 GHz in the CW regime) and a quasi optical multi-beam transmission line. W7-X gyrotron candidates are being developed separately in Western Europe and the USA. The prototype phase of the gyrotrons is almost over and significant results have been achieved. The manufacturing of the transmission line is ongoing. An overview over the system including data acquisition and control issues will be given and the current status of the construction will be presented. (authors)

Determination of Alkylphenols and Alkylphenol Ethoxylates in Water using Magnetically Modified Chromatographic Column Packing for Extraction

Czech Academy of Sciences Publication Activity Database

Komárek, K.; Hubka, T.; Šafaříková, Miroslava; Elcnerová, M.; Šafařík, Ivo; Kujalová, H.

2008-01-01

Roč. 14, March 08 (2008), s. 21-32 ISSN 1211-5541 R&D Projects: GA ČR GA203/03/1070 Institutional research plan: CEZ:AV0Z60870520 Keywords : Magnetic solid phase extarction * magnetic separation * alkylphenols * surfactants Subject RIV: EH - Ecology, Behaviour

Local Variability of the Peierls Barrier of Screw Dislocations in Ta-10W.

Energy Technology Data Exchange (ETDEWEB)

Foiles, Stephen M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-10-01

It is well know that the addition of substitutional elements changes the mechanical behavior of metals, a effect referred to solid solution hardening. For body-centered-cubic (BCC) metals, screw dislocation play a key role in the mechanical properties. Here the detailed modification of the Peierls barrier for screw dislocation motion in Ta with W substitutional atoms is computing using density functional theory (DFT). A reduced order model (ROM) of the influence of W substitution on the Peierls barrier is developed. The mean field change in the Peierls barrier for a Ta10W alloy is determined and shown to be larger than anticipated based on simple elasticity considerations. The ROM could be used in future calculations to determine the local variability of the Peierls barrier and the resultant influence on the motion of screw dislocation in this alloy.

Accident consequence calculations for project W-058 safetyanalysis

Energy Technology Data Exchange (ETDEWEB)

Van Keuren, J.C.

1997-06-10

Accident consequence analyses have been performed for Project W-058, the Replacement Cross Site Transfer System. using the assumption and analysis techniques developed for the Tank Remediation Waste system Basis for Interim Operation. most potential accident involving the FISTS are bounded by the TWRS BIO analysis. However, the spray leak and pool leak scenarios require revised analyses since the RCSTS design utilizes larger diameter pipe and higher pressures than those analyzed in the TWRS BIO. Also the volume of diversion box and vent station are larger than that assumed for the valve pits in the TWRS BIO, which effects results of sprays or spills into the pits. the revised analysis for the spray leak is presented in Section 2, for the above ground spill in Section 3, for the presented in Section 2, for the above ground spill in Section 3, for the subsurface spill forming a pool in Section 4, and for the subsurface pool remaining subsurface in Section 5. The conclusion from these sections are summarized below.

GeoComp-n, an advanced system for the processing of coarse and medium resolution satellite data. Part 2: biophysical products for Northern ecosystems

Energy Technology Data Exchange (ETDEWEB)

Cihlar, J. [Canada Centre for Remote Sensing, Natural Resources Canada, Ottawa, Ontario (Canada); Chen, J. [Canada Centre for Remote Sensing, Natural Resources Canada, Ottawa, Ontario (Canada); Univ. of Toronto, Dept. of Geography, Toronto, Ontario (Canada); Li, Z. [Canada Centre for Remote Sensing, Natural Resources Canada, Ottawa, Ontario (Canada); Univ. of Maryland, Dept of Meteorology, College Park, MD (United States)] [and others

2002-02-01

Effective use of satellite data for environmental monitoring requires consistent, high-throughput processing of large volumes of data as it is transformed from raw measurements to useful higher level products. 'GeoComp-n', the next generation of the Geocoding and Compositing System developed at the Canada Centre for Remote Sensing, Natural Resources Canada, was developed as a software solution to this challenge, for use with satellites that provide daily data for the landmass of Canada or comparably large areas. In this paper, the authors discuss the characteristics of the algorithms and methods used in the generation of GeoComp-n products. The theoretical basis and assumptions in the algorithms are described, and the quality of the products is discussed based on validation studies. Examples of a suite of products for Canada during one 10-day period illustrate the diversity and quality of observations for the terrestrial biosphere that may be derived frequently and over large areas from satellites. Issues related to quality assessment in a production environment are also discussed. (author)

GeoComp-n, an advanced system for the processing of coarse and medium resolution satellite data. Part 2: biophysical products for Northern ecosystems

International Nuclear Information System (INIS)

Cihlar, J.; Chen, J.; Li, Z.

2002-01-01

Effective use of satellite data for environmental monitoring requires consistent, high-throughput processing of large volumes of data as it is transformed from raw measurements to useful higher level products. 'GeoComp-n', the next generation of the Geocoding and Compositing System developed at the Canada Centre for Remote Sensing, Natural Resources Canada, was developed as a software solution to this challenge, for use with satellites that provide daily data for the landmass of Canada or comparably large areas. In this paper, the authors discuss the characteristics of the algorithms and methods used in the generation of GeoComp-n products. The theoretical basis and assumptions in the algorithms are described, and the quality of the products is discussed based on validation studies. Examples of a suite of products for Canada during one 10-day period illustrate the diversity and quality of observations for the terrestrial biosphere that may be derived frequently and over large areas from satellites. Issues related to quality assessment in a production environment are also discussed. (author)

Project W-314 241-AN-A valve pit upgrade acceptance for beneficial use

Energy Technology Data Exchange (ETDEWEB)

HAMMERS, J.S.

1999-07-21

This report identifies the responsibilities and requirements, applicable to the 241-AN-A Valve Pit Upgrades portion of Project W-314, for Acceptance for Beneficial Use in accordance with HNF-IP-0842, Vol IV, Sec 3.12. At project turnover, the end user accepts the affected Structures, Systems, and Components (SSCs) for beneficial use. This checklist is used to help the end user ensure that all documentation, training, and testing requirements are met prior to turnover. This checklist specifically identifies those items related to the upgrading of the 241-AN-A valve pit. The upgrades include: the installation of jumper/valve manifolds with position sensors, replacement pit leak detection systems, construction of replacement cover blocks, and electrical upgrades to support the instrumentation upgrades.

Project W-314 241-AN-A valve pit upgrade acceptance for beneficial use

International Nuclear Information System (INIS)

HAMMERS, J.S.

1999-01-01

This report identifies the responsibilities and requirements, applicable to the 241-AN-A Valve Pit Upgrades portion of Project W-314, for Acceptance for Beneficial Use in accordance with HNF-IP-0842, Vol IV, Sec 3.12. At project turnover, the end user accepts the affected Structures, Systems, and Components (SSCs) for beneficial use. This checklist is used to help the end user ensure that all documentation, training, and testing requirements are met prior to turnover. This checklist specifically identifies those items related to the upgrading of the 241-AN-A valve pit. The upgrades include: the installation of jumper/valve manifolds with position sensors, replacement pit leak detection systems, construction of replacement cover blocks, and electrical upgrades to support the instrumentation upgrades

Development of electrical efficiency measurement techniques for 10 kW-class SOFC system: Part I. Measurement of electrical efficiency

International Nuclear Information System (INIS)

Tanaka, Yohei; Momma, Akihiko; Kato, Ken; Negishi, Akira; Takano, Kiyonami; Nozaki, Ken; Kato, Tohru

2009-01-01

Measurement techniques to estimate electrical efficiency of 10 kW-class SOFC systems fueled by town-gas were developed and demonstrated for a system developed by Kansai Electric Power Company and Mitsubishi Materials Corporation under a NEDO project. Higher heating value of the fuel was evaluated with a transportable gas sampling unit and conventional gas chromatography in AIST laboratory with thermal-conductivity and flame-ionization detectors, leading to mean value 44.69 MJ m -3 on a volumetric base for ideal-gas at the standard state (0 deg. C, 101.325 kPa). Mass-flow-rate of the fuel was estimated as 33.04 slm with a mass-flow meter for CH 4 , which was calibrated to correct CH 4 flow-rate and effect of sensitivity change and to obtain conversion factor from CH 4 to town-gas. Without calibration, systematic effect would occur by 8% in flow-rate measurement in the case for CH 4 . Power output was measured with a precision power analyzer, a virtual three phase starpoint adapter, and tri-axial shunts. Power of fundamental wave (60 Hz) was estimated as 10.14 kW, considering from total active power, total higher harmonic distortion factor, and power consumption at the starpoint adapter. The electrical efficiency was presumed to be 41.2% (HHV), though this mean value will be complete only when uncertainty estimation is accompanied

Fabricação de compósitos com matriz de alumina reforçada com whiskers de mulita

OpenAIRE

Salles, Mário César Fernandez de

2008-01-01

Neste trabalho foram fabricados compósitos cerâmicos utilizando alumina como matriz e whiskers de mulita como reforço. As composições de whiskers foram 10, 20, 30 e 40% em peso. Os whiskers de mulita utilizados como matérias-primas foram obtidos através do tratamento térmico do mineral topázio incolor no Laboratório de Tratamento Térmico de Materiais do ICEB/UFOP. A alumina de elevada pureza foi fornecida pela empresa Alfa Apesar. As matérias primas, após serem pesadas, foram submetidas a um ...

The Japanese approach to financing LNG projects

International Nuclear Information System (INIS)

Aoki, Wataru

1995-01-01

The Japanese approach approach to financing LNG project has been what could be called a combined purchase and finance system which has been arranged mainly at the initiative of japan's Sogo Shosh (general trading companies) with the support of japanese governmental financial agencies and a purchase commitment from japanese utilities. In the QATARGAS project, despite it being the first greenfield LNG project in decade since North West Shelf Australia LNG project, financing for the LNG plant phase has been successfully arranged through Japanese financing. The structuring of the financial facilities for the QATARGAS project seems to have lessons for future development of the next generation of greenfield LNG projects. Discharge of the parties' liability, proper sharing of the risk burden and reconfirmation of the spirit of mutual understanding and trust among the parties concerned are key factors for the success of any new LNG project in the future. (Author)

Project W-320, 241-C-106 sluicing: Construction specification W-320-C1

International Nuclear Information System (INIS)

Bailey, J.W.

1998-01-01

Project W-320, Waste Retrieval Sluicing System (WRSS), specification is for procurement, fabrication and installation of equipment at the C Tank Farm, including Operator Station and some equipment just outside the C Tank Farm fence, necessary to support the sluicing operation. Work consists of furnishing labor, equipment, and materials to provide the means to procure materials and equipment, fabricate items, excavate and place concrete, and install equipment, piping, wiring, and structures in accordance with the Contract Documents. Major work elements include: Excavation for process and fire protection piping, electrical conduit trenches, and foundations for small structures; Placement of concrete cover blocks, foundations, and equipment pads; Procurement and installation of double walled piping, electrical conduit, fire and raw water piping, chilled water piping, and electrical cable; Procurement and installation of above-ground ventilation system piping between the (HVAC) Process building and Tank C-106; Core drill existing concrete; Furnish and installation of electrical distribution equipment; Installation of the concrete foundation, and assembly installation of the two Seismic Shutdown Systems with Environmental Enclosures; Fabrication and installation of in-pit pipe jumpers, including related valves, instruments and wiring; and Installation of a vertical submersible pump, horizontal booster pump, and winch assembly into tank access riser pits

OBLICZENIE PRZEPŁYWÓW MAKSYMALNYCH I ICH REDUKCJI W ZLEWNI ZURBANIZOWANEJ

Directory of Open Access Journals (Sweden)

Mariusz BARSZCZ

2016-03-01

Full Text Available W pracy przedstawiono wyniki zastosowania modelu SWMM do obliczenia przepływów o prawdopodobieństwach 50, 10, 2 i 1% w 8. przekrojach Potoku Służewieckiego na odcinku od km 0+000 do 6+576 oraz w 2. przekrojach Rowu Wolica. Zlewnia Potoku Służewieckiego jest zlokalizowana w południowej części Warszawy. Największe zagrożenie powodziowe występuje na odcinku Potoku Służewieckiego od km 0+000 do 3+875. Przepustowość koryta Potoku na tym odcinku kształtuje się na poziomie przepływu maksymalnego o prawdopodobieństwie 50%. Największe wartości przepływów w Potoku Służewieckim prognozowano w przekroju obliczeniowym numer V (km 4+267: Q50% = 13,863, Q10% = 23,019, Q2% = 28,825 i Q1% = 30,500 m3·s-1. Jedną z przyczyn występowania zagrożenia powodziowego w dolnym biegu Potoku Służewieckiego jest dopływ dużej ilości wód opadowych Rowem Wolica. Wartości przepływów w górnym odcinku Rowu Wolica (w przekroju VI zawierały się w granicach od 8,005 do 12,402 m3·s-1, w zależności od prawdopodobieństwa wystąpienia opadu obliczeniowego. W celu określenia możliwości redukcji przepływów w Rowie Wolica, przeprowadzono obliczenia w których uwzględniono zastosowanie kryzy na odcinku ujściowym kolektora do kanału otwartego. Zastosowanie kryzy w kolektorze pozwoli zredukować przepływy o prawdopodobieństwach 50, 10 i 2% odpowiednio o 61,0; 46,0 i 36,6%. Zastosowanie kryzy o stałej średnicy ϕ1,08 m, ustalonej dla przepływu o prawdopodobieństwie 2%, spowoduje znacznie mniejszą redukcję przepływów maksymalnych o prawdopodobieństwach 50 i 10%.

Correlation of serum cartilage oligomeric matrix protein (COMP) and interleukin-16 (IL-16) levels with disease severity in primary knee osteoarthritis: A pilot study in a Malaysian population.

Science.gov (United States)

Das Gupta, Esha; Ng, Wei Ren; Wong, Shew Fung; Bhurhanudeen, Abdul Kareem; Yeap, Swan Sim

2017-01-01

The aim of this study was to investigate the correlations between serum cartilage oligomeric matrix protein (COMP), interleukin-16 (IL-16) and different grades of knee osteoarthritis (KOA) in Malaysian subjects. Ninety subjects were recruited comprising 30 with Kellgren-Lawrence (K-L) grade 2 KOA, 27 with K-L grade 3 KOA, 7 with grade 4 KOA, and 30 healthy controls. All subjects completed the Western Ontario and McMaster Universities Arthritis Index (WOMAC) questionnaire. Serum COMP and IL-16 levels were measured using ELISA and their values log transformed to ensure a normal distribution. There was no significant differences in levels of log serum COMP and IL-16 between healthy controls and KOA patients. There were no significant differences in the log serum COMP and IL-16 levels within the different K-L grades in the KOA patients. In KOA patients, log serum IL-16 levels significantly correlated with the WOMAC score (p = 0.001) and its subscales, pain (p = 0.005), stiffness (p = 0.019) and physical function (p<0.0001). Serum IL-16 levels were significantly higher in Malaysian Indians compared to Malays and Chinese (p = 0.024). In this multi-ethnic Malaysian population, there was no difference in serum COMP and IL-16 levels between healthy controls and patients with KOA, nor was there any difference in serum COMP or IL-16 levels across the various K-L grades of KOA. However, there were significant inter-racial differences in serum IL-16 levels.

Economic Feasibility Analysis for Renewable Energy Project Using an Integrated TFN–AHP–DEA Approach on the Basis of Consumer Utility

Directory of Open Access Journals (Sweden)

Lu Gan

2017-12-01

Full Text Available A renewable energy (RE project has been brought into focus in recent years. Although there is quite a lot of research to assist investors in assessing the economic feasibility of the project, because of the lack of consideration of consumer utility, the existing approaches may still cause a biased result. In order to promote further development, this study focuses on the economic feasibility analysis of the RE project on the basis of consumer utility in the whole life cycle. Therefore, an integrated approach is proposed, which consists of triangular fuzzy numbers (TFNs, an analytic hierarchy process (AHP and data envelopment analysis (DEA. The first step is to determine the comprehensive cost index weights of DEA by TFN–AHP. Secondly, to solve the problem, the first DEA model, which is proposed by A. Charnes, W. W. Cooper and E. Rhodes (C2R, is established to calculate the DEA effectiveness. Then, the third task involves designing a computer-based intelligent interface (CBII to simplify realistic application and ensure performance efficiency. Finally, a solar water heater case study is demonstrated to validate the effectiveness of the entire method’s system. The study shows that this could make investors’ lives easier by using the CBII scientifically, reasonably and conveniently. Moreover, the research results could be easily extended to more complex real-world applications.

Effect of irradiation mode and filling technique on resin/dentin bonding strength in class I cavities Efeito do modo de ativação e da técnica restauradora na resistência de união entre compósito e dentina em cavidades classe I

Directory of Open Access Journals (Sweden)

Alex José Souza dos Santos

2004-09-01

Full Text Available Factors such as light-curing mode, filling technique and cavity configuration may affect the bonding strength to dentin. This study evaluated the effect of irradiation mode and filling technique on resin/dentin bonding strength on the buccal wall of class I cavities in human teeth. Occlusal enamel was removed to expose a flat dentin surface. Occlusal cavities (4 x 3 x 3 mm were prepared in dentin. The adhesive Single Bond was applied according to the manufacturer's instructions and TPH Spectrum composite resin was placed using the following: oblique incremental, horizontal incremental or bulk filling techniques. The composite resin was light-cured either by continuous (600 mW/cm² for 40 s or Soft-Start (250 mW/cm² for 10 s + 600 mW/cm² for 30 s modes. Specimens of the control group were obtained by bonding the material to the flat exposed buccal wall of the cavity (C-factor = 1. The teeth were stored in water at 37ºC for 24 h and prepared for microtensile testing. Bonded beams of approximately 0.8 mm² were obtained from the buccal wall and tested with a tension of 0.5 mm/min. Results were analyzed by two-way ANOVA, Tukey's test and Dunnett's test (alpha = 0.05. Incremental placement techniques with both irradiation modes produced higher bonding strength values than the bulk technique (p Fatores como o modo de ativação, a técnica restauradora e a configuração cavitária podem afetar a resistência adesiva à dentina. Este estudo avaliou os efeitos dos modos de ativação e das técnicas restauradoras na resistência de união compósito/dentina na parede vestibular de restaurações classe I. O esmalte oclusal dos dentes foi removido para expor uma superfície dentinária planificada. Cavidades oclusais (4 x 3 x 3 mm foram preparadas em dentina. O adesivo Single Bond foi aplicado de acordo com as instruções do fabricante, e o compósito TPH Spectrum, inserido através de três diferentes técnicas: oblíqua incremental, horizontal

Processamento de plásticos e materiais compósitos: comportamento mecânico de componentes em serviço

OpenAIRE

Capela, Carlos Alexandre Bento

2010-01-01

As vantagens dos materiais plásticos, tais como facilidade de processamento, baixo custo, alta produtividade e versatilidade, permite obter plásticos e materiais compósitos de matriz polimérica para um grande número de aplicações em engenharia. Os materiais compósitos são, actualmente, muito utilizados não só na indústria aeroespacial, mas, também, num crescente número de aplicações de Engenharia Mecânica, tais como componentes de máquinas, vasos de pressão, equipamentos industriais de proces...

W.A. Parish Post Combustion CO₂ Capture and Sequestration Project Final Public Design Report

Energy Technology Data Exchange (ETDEWEB)

Armpriester, Anthony [Petra Nova Parish Holdings, Washington, DC (United States)

2017-02-17

The Petra Nova Project is a commercial scale post-combustion carbon dioxide capture project that is being developed by a joint venture between NRG Energy (NRG) and JX Nippon Oil and Gas Exploration (JX). The project is designed to separate and capture carbon dioxide from an existing coal-fired unit's flue gas slipstream at NRG's W.A. Parish Generation Station located southwest of Houston, Texas. The captured carbon dioxide will be transported by pipeline and injected into the West Ranch oil field to boost oil production. The project, which is partially funded by financial assistance from the U.S. Department of Energy will use Mitsubishi Heavy Industries of America, Inc.'s Kansai Mitsubishi Carbon Dioxide Recovery (KM-CDR(R)) advanced amine-based carbon dioxide absorption technology to treat and capture at least 90% of the carbon dioxide from a 240 megawatt equivalent flue gas slipstream off of Unit 8 at W.A. Parish. The project will capture approximately 5,000 tons of carbon dioxide per day or 1.5 million tons per year that Unit 8 would otherwise emit, representing the largest commercial scale deployment of post-combustion carbon dioxide capture at a coal power plant to date. The joint venture issued full notice to proceed in July 2014 and when complete, the project is expected to be the world's largest post-combustion carbon dioxide capture facility on an existing coal plant. The detailed engineering is sufficiently complete to prepare and issue the Final Public Design Report.

Design criteria document, Maintenance Shop/Support Facility, K-Basin Essential Systems Recovery, Project W-405

International Nuclear Information System (INIS)

Strehlow, M.W.B.

1994-01-01

During the next 10 years a substantial amount of work is scheduled in the K-Basin Area related to the storage and eventual removal of irradiated N-Reactor fuel. Currently, maintenance support activities are housed in existing structures that were constructed in the early 1950's. These forty-year-old facilities and their supporting services are substandard, leading to inefficiencies. Because of numerous identified deficiencies and the planned increase in the numbers of K-Basin maintenance personnel, adequate maintenance support facilities that allow efficient operations are needed. The objective of this sub-project of Project W-405 is to provide a maintenance and storage facility which meets the K-Basin Maintenance Organization requirements as defined in Attachment 1. In Reference A, existing guidelines and requirements were used to allocate space for the maintenance activities and to provide a layout concept (See Attachment 2). The design solution includes modifying the existing 190 K-E building to provide space for shops, storage, and administration support functions. The primary reason for the modification is to simplify siting/permitting and make use of existing infrastructure. In addition, benefits relative to design loads will be realized by having the structure inside 190K-E. The new facility will meet the Maintenance Organization approved requirements in Attachment 1 relating to maintenance activities, storage areas, and personnel support services. This sub-project will also resolve outstanding findings and/or deficiencies relating to building fire protection, HVAC requirements, lighting replacement/upgrades, and personnel facilities. Compliance with building codes, local labor agreements and safety standards will result

Efeito do condicionamento ambiental nas propriedades de cisalhamento e viscoelásticas de compósitos híbridos metal-fibra

OpenAIRE

Damato, Cesar Augusto [UNESP

2010-01-01

O desenvolvimento da tecnologia dos compósitos híbridos, combinando laminados poliméricos reforçados com fibras longas e placas metálicas, normalmente ligas de alumínio, denominados de CHMF, tem como uma de suas finalidades formar um conjunto de materiais que combine elevados valores de resistência mecânica, resistência ao impacto, rigidez e baixa massa específica. Essa combinação de propriedades torna os CHMF particularmente atrativos como substituintes das ligas metálicas e dos compósitos t...

Avaliação dos modos de falha sob impacto de compósitos de matriz polimérica reforçados por fibras

Directory of Open Access Journals (Sweden)

Marcelo M. M. Naglis

1998-03-01

Full Text Available RESUMO: Neste trabalho é feita uma avaliação dos modos de falha de compósitos de matriz polimérica reforçados por fibras de vidro, carbono ou aramida, submetidos a carregamento dinâmico. Os compósitos unidirecionais analisados foram fabricados por prensagem e cura à vácuo de lâminas de pré-impregnados. A energia total absorvida na fratura mostrou uma correlação inversamente proporcional ao módulo elástico das fibras usadas como reforço. Os compósitos com fibras de carbono falharam de um modo frágil. Para estes compósitos o comportamento ao impacto pode ser modelado usando-se uma análise puramente elástica. Para os compósitos com fibras de vidro a falha foi controlada por um mecanismo misto de cisalhamento ao longo da interface fibra-matriz e tensão normal trativa atuando perpendicularmente às fibras. O modelo elástico empregado para simular o comportamento ao impacto subestima a energia absorvida por estes compósitos, porém, a diferença entre os valores experimentais e os calculados não ultrapassou 20 %. A falha dos compósitos com fibras aramidas foi atribuída, principalmente, ao componente de tensão trativa atuando perpendicularmente às fibras. Nestes compósitos foi observado arrancamento superficial nas fibras aramidas e o comportamento ao impacto não obedece o modelo elástico empregado.ABSTRACT: In this work an evaluation of the fracture mode of fiber reinforced resin matrix composites submitted to three point bending dynamic impact testing was undertaken. The unidirectional glass, carbon and aramid fiber-epoxy matrix composites used were fabricated by vacuum bagging prepreg laminas. The energy absorbed to fracture the composites had an inverse correlation to the fibres' elastic modulus. The carbon fiber composites failed in a brittle mode. The analysis of the fracture surfaces showed that for the glass fiber composites, the failure is controlled by a coupled mechanism of shear along the fiber

Jauch-Piron states in W*-algebraic quantum mechanics

Science.gov (United States)

Amann, Anton

1987-10-01

A state φ on a W*-algebra M is said to fulfill the Jauch-Piron condition if φ(p)=φ(q)=1 for projections p,q∈M implies φ(p∧q)=1. Here p∧q denotes the infimum of p and q in the projection lattice of M. The Jauch-Piron condition is a compatibility condition between the algebraic and the lattice-theoretic approach for the description of physical systems. Normal (i.e., σ-weakly continuous) states always fulfill the Jauch-Piron condition. It is argued that states not fulfilling this condition should be regarded as unphysical. It is shown that a state φ on a σ-finite factor M is singular if and only if projections e, f∈ M exist such that φ(e)=φ( f )=1 and e∧f=0. In particular, any pure state φ on M fulfilling the Jauch-Piron condition is normal, which implies that the underlying factor M is of type I. Furthermore, the following result is proved: Let φ be a pure Jauch-Piron state on W*-algebra M with separable predual and without any commutative summand. Then φ is normal and a central projection z0∈ M exists such that φ(z0)=1 and z0 Mz0 is a factor of type I. Thus, cum grano salis, pure Jauch-Piron states exist only on commutative W*-algebras and type I factors. The former case corresponds to classical theories, the latter to Hilbert-space quantum mechanics. The implications of these results on the interpretation of quantum mechanics are discussed.

An Approach for Implementation of Project Management Information Systems

Science.gov (United States)

Běrziša, Solvita; Grabis, Jānis

Project management is governed by project management methodologies, standards, and other regulatory requirements. This chapter proposes an approach for implementing and configuring project management information systems according to requirements defined by these methodologies. The approach uses a project management specification framework to describe project management methodologies in a standardized manner. This specification is used to automatically configure the project management information system by applying appropriate transformation mechanisms. Development of the standardized framework is based on analysis of typical project management concepts and process and existing XML-based representations of project management. A demonstration example of project management information system's configuration is provided.

Study on Risk Approaches in Software Development Projects

Directory of Open Access Journals (Sweden)

Claudiu BRANDAS

2012-01-01

Full Text Available Risk approaches in project development led to the integration in the IT project management methodologies and software development of activities and processes of risk management. The diversity and the advanced level of the used technologies in IT projects with increasing com-plexity leads to an exponential diversification of risk factors.The purpose of this research is to identify the level of the risk approach in IT projects both at the IT project management and software development methodologies level and the level of the perception of IT project man-agers, IT managers and IT analysts in Romanian IT companies. Thus, we want to determine the correlation between the use of a project management or software development methodology and the overall level of risk perceived by the project managers using these methodologies.

Advanced Imaging Approaches to Characterize Stromal and Metabolic Changes in In Vivo Mammary Tumor Models

Science.gov (United States)

2015-02-01

Bird , L. Yan, K. M. Vrotsos, K. W. Eliceiri, E. M. Vaughan, P. J. Keely, J. G. White, N. Ramanujam, Metabolic mapping of MCF10A human breast cells...1   Award Number: W81XWH-12-1-0025 TITLE: Advanced Imaging Approaches to Characterize Stromal and Metabolic Changes in In Vivo Mammary... Metabolic Changes in In Vivo Mammary Tumor Models 5b. GRANT NUMBER BC112240 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Betty Diamond 5d. PROJECT NUMBER

Efeito de aditivos desaerantes nas características de compósitos de epóxi/fibras de vidro

Directory of Open Access Journals (Sweden)

Alexsandro Oliveira

2014-01-01

Full Text Available A presença de vazios é um importante fator a afetar as propriedades de compósitos poliméricos. Existem várias causas para a formação de vazios, entre elas, o aprisionamento de gás (frequentemente gás úmido durante o processo de impregnação dos reforços fibrosos com resina e os voláteis gerados durante a formulação da resina. A quantidade de bolhas de ar aprisionadas pode ser, por vezes, reduzida se o sistema de resina é sujeito a um processo de desgaseificação por vácuo ou pelo uso de aditivos químicos especiais. O objetivo deste trabalho é investigar o efeito de um agente desaerante nas propriedades finais de compósitos de resina epóxi moldados pelo processo de RTM utilizando como reforço mantas e tecidos de fibras de vidro. Os compósitos produzidos foram avaliados quanto as suas propriedades de tração, flexão, dureza, short beam e análise dinâmico mecânica (DMA. Em geral, a utilização do aditivo desaerante não provocou alterações significativas nas propriedades mecânicas, tais como resistência e módulo de tração e flexão, as quais são determinadas principalmente pelo tipo e fração volumétrica de fibras. Contudo, os resultados de resistência ao cisalhamento e de dureza mostram um efeito positivo com a inclusão do agente desaerante, levando à melhora na qualidade dos compósitos.

A novel Mo-W interlayer approach for CVD diamond deposition on steel

Science.gov (United States)

Kundrát, Vojtěch; Zhang, Xiaoling; Cooke, Kevin; Sun, Hailin; Sullivan, John; Ye, Haitao

2015-04-01

Steel is the most widely used material in engineering for its cost/performance ratio and coatings are routinely applied on its surface to further improve its properties. Diamond coated steel parts are an option for many demanding industrial applications through prolonging the lifetime of steel parts, enhancement of tool performance as well as the reduction of wear rates. Direct deposition of diamond on steel using conventional chemical vapour deposition (CVD) processes is known to give poor results due to the preferential formation of amorphous carbon on iron, nickel and other elements as well as stresses induced from the significant difference in the thermal expansion coefficients of those materials. This article reports a novel approach of deposition of nanocrystalline diamond coatings on high-speed steel (M42) substrates using a multi-structured molybdenum (Mo) - tungsten (W) interlayer to form steel/Mo/Mo-W/W/diamond sandwich structures which overcome the adhesion problem related to direct magnetron sputtering deposition of pure tungsten. Surface, interface and tribology properties were evaluated to understand the role of such an interlayer structure. The multi-structured Mo-W interlayer has been proven to improve the adhesion between diamond films and steel substrates by acting as an effective diffusion barrier during the CVD diamond deposition.

A novel Mo-W interlayer approach for CVD diamond deposition on steel

Energy Technology Data Exchange (ETDEWEB)

Kundrát, Vojtěch; Sullivan, John; Ye, Haitao, E-mail: h.ye@aston.ac.uk [School of Engineering and Applied Science, Aston University, Birmingham, B4 7ET (United Kingdom); Zhang, Xiaoling; Cooke, Kevin; Sun, Hailin [Miba Coating Group: Teer Coatings Ltd, West-Stone-House, West-Stone, Berry-Hill-Industrial-Estate, WR9 9AS, Droitwich (United Kingdom)

2015-04-15

Steel is the most widely used material in engineering for its cost/performance ratio and coatings are routinely applied on its surface to further improve its properties. Diamond coated steel parts are an option for many demanding industrial applications through prolonging the lifetime of steel parts, enhancement of tool performance as well as the reduction of wear rates. Direct deposition of diamond on steel using conventional chemical vapour deposition (CVD) processes is known to give poor results due to the preferential formation of amorphous carbon on iron, nickel and other elements as well as stresses induced from the significant difference in the thermal expansion coefficients of those materials. This article reports a novel approach of deposition of nanocrystalline diamond coatings on high-speed steel (M42) substrates using a multi-structured molybdenum (Mo) – tungsten (W) interlayer to form steel/Mo/Mo-W/W/diamond sandwich structures which overcome the adhesion problem related to direct magnetron sputtering deposition of pure tungsten. Surface, interface and tribology properties were evaluated to understand the role of such an interlayer structure. The multi-structured Mo-W interlayer has been proven to improve the adhesion between diamond films and steel substrates by acting as an effective diffusion barrier during the CVD diamond deposition.

A novel Mo-W interlayer approach for CVD diamond deposition on steel

Directory of Open Access Journals (Sweden)

Vojtěch Kundrát

2015-04-01

Full Text Available Steel is the most widely used material in engineering for its cost/performance ratio and coatings are routinely applied on its surface to further improve its properties. Diamond coated steel parts are an option for many demanding industrial applications through prolonging the lifetime of steel parts, enhancement of tool performance as well as the reduction of wear rates. Direct deposition of diamond on steel using conventional chemical vapour deposition (CVD processes is known to give poor results due to the preferential formation of amorphous carbon on iron, nickel and other elements as well as stresses induced from the significant difference in the thermal expansion coefficients of those materials. This article reports a novel approach of deposition of nanocrystalline diamond coatings on high-speed steel (M42 substrates using a multi-structured molybdenum (Mo – tungsten (W interlayer to form steel/Mo/Mo-W/W/diamond sandwich structures which overcome the adhesion problem related to direct magnetron sputtering deposition of pure tungsten. Surface, interface and tribology properties were evaluated to understand the role of such an interlayer structure. The multi-structured Mo-W interlayer has been proven to improve the adhesion between diamond films and steel substrates by acting as an effective diffusion barrier during the CVD diamond deposition.

The mechanical properties of magnesium matrix composites reinforced with 10 wt.% W14Al86 alloy particles

International Nuclear Information System (INIS)

Tang, H.G.; Ma, X.F.; Zhao, W.; Cai, S.G.; Zhao, B.; Qiao, Z.H.

2007-01-01

The Mg-based metal matrix composite reinforced by 10 wt.% W 14 Al 86 alloy particles has been prepared by mechanical alloying and press-forming process. X-ray diffraction studies confirm the formation of the composite. Microstructure characterization of the samples reveals the uniform distribution of fine W 14 Al 86 alloy. Mechanical properties characterization revealed that the reinforcement of W 14 Al 86 alloy lead to a significant increase in hardness and tensile strength of Mg and AZ91

Immobilized low-activity waste interim storage facility, Project W-465 conceptual design report

International Nuclear Information System (INIS)

Pickett, W.W.

1997-01-01

This report outlines the design and Total Estimated Cost to modify the four unused grout vaults for the remote handling and interim storage of immobilized low-activity waste (ILAW). The grout vault facilities in the 200 East Area of the Hanford Site were constructed in the 1980s to support Tank Waste disposal activities. The facilities were to serve project B-714 which was intended to store grouted low-activity waste. The existing 4 unused grout vaults, with modifications for remote handling capability, will provide sufficient capacity for approximately three years of immobilized low activity waste (ILAW) production from the Tank Waste Remediation System-Privatization Vendors (TWRS-PV). These retrofit modifications to the grout vaults will result in an ILAW interim storage facility (Project W465) that will comply with applicable DOE directives, and state and federal regulations

Immobilized low-activity waste interim storage facility, Project W-465 conceptual design report

Energy Technology Data Exchange (ETDEWEB)

Pickett, W.W.

1997-12-30

This report outlines the design and Total Estimated Cost to modify the four unused grout vaults for the remote handling and interim storage of immobilized low-activity waste (ILAW). The grout vault facilities in the 200 East Area of the Hanford Site were constructed in the 1980s to support Tank Waste disposal activities. The facilities were to serve project B-714 which was intended to store grouted low-activity waste. The existing 4 unused grout vaults, with modifications for remote handling capability, will provide sufficient capacity for approximately three years of immobilized low activity waste (ILAW) production from the Tank Waste Remediation System-Privatization Vendors (TWRS-PV). These retrofit modifications to the grout vaults will result in an ILAW interim storage facility (Project W465) that will comply with applicable DOE directives, and state and federal regulations.

Safety impacts of the I-35W improvements done under Minnesota's urban partnership agreement (UPA) project : final report.

Science.gov (United States)

2017-06-01

As part of an Urban Partnership Agreement project, the Minnesota Department of Transportation added lanes : and began operating a priced dynamic shoulder lane (PDSL) on parts of Interstate 35W. Following the opening of : these improvements, the frequ...

Fire hazards analysis for the replacement cross-site transfer system, project W-058

International Nuclear Information System (INIS)

Sepahpur, J.B.

1996-01-01

The fire hazards analysis assess the risk from fire and determines compliance with the applicable criteria of DOE 5480.7A, DOE 6430.1A, and RLID 5480.7. (Project W-058 will provide encased pipelines to connect the SY Tank Farms in 200 West Area with the tank farms in 200 East Area via an interface with the 244-A lift station. Function of the cross-site transfer system will be to transfer radioactive waste from the SY Tank Farm to treatment, storage, and disposal facilities in 200 East Area.)

Compósitos de borracha natural ou policloropreno e celulose II: influência do tamanho de partícula Natural rubber or chloroprene rubber and cellulose II composites: influence of particle size

Directory of Open Access Journals (Sweden)

Bruno de A. Napolitano

2004-01-01

Full Text Available O objetivo deste trabalho foi o desenvolvimento de compósitos claros com propriedades de interesse tecnológico utilizando elastômeros com diferentes polaridades. Para que este objetivo fosse atingido, celulose II em pó foi usada como carga, em borracha natural (NR ou policloropreno (CR. A celulose II foi obtida por coagulação da solução de xantato de celulose em meio ácido, sob agitação constante e à temperatura ambiente, constituindo uma nova forma de obtenção deste tipo de carga. Compósitos com 10 phr de celulose II com NR e CR, respectivamente, foram desenvolvidos tendo como variável o tamanho de partícula da carga. As propriedades mecânicas e os aspectos microscópicos dos diferentes compósitos foram avaliados e comparados com aqueles das formulações sem carga. Os resultados permitiram identificar o compósito como o de melhor resultado, influenciado pela polaridade da matriz elastomérica e pelo tamanho de partícula da carga, conseqüência das condições de moagem usadas.The aim of this work was to develop light composites with properties of technological interest by using elastomers of different polarities. This was achieved by employing cellulose II, in the powder form, as filler in natural rubber (NR and chloroprene (CR. Cellulose II was obtained by coagulation of cellulose xanthate solution, in acid medium, under stirring and at room temperature, which represents, to our knowledge, a new way of obtaining this type of filler. Composites with 10phr of cellulose II and NR or CR were prepared having the particle size as variable. The mechanical properties and the microscopic aspect of the different composites were evaluated and compared with compounds without filler. The results indicated best results for the CR composite, influenced by the polarity of the elastomeric matrix and by the particle size, as a consequence of the milling conditions of the filler used.

Resistência ao Cisalhamento Interlaminar de Compósitos com Resina Epóxi com Diferentes Arranjos das Fibras na Presença de Vazios

Directory of Open Access Journals (Sweden)

Costa Michelle L.

2001-01-01

Full Text Available A presença de vazios em compósitos estruturais pode ter efeitos significativos. Em geral, os vazios diminuem a resistência estática e a vida em fadiga de laminados. Essa influência é bastante pronunciada na resistência ao cisalhamento interlaminar, compressão, entre outras, onde as propriedades mecânicas da matriz exercem maior influência sobre o comportamento do compósito. O presente artigo descreve o estudo do efeito da porosidade na resistência ao cisalhamento interlaminar de sistemas de compósitos de tecido e tape (fitas unidirecionais de carbono aglutinados com matriz epóxi. Os laminados foram produzidos de maneira semelhante, bem como o processo de introdução de vazios (na faixa de 0a 12% de porosidade.Os compósitos foram avaliados por análises microscópicas e inspeção ultra-sônica e os valores de atenuação medidos foram convertidos em coeficientes de absorção para permitir uma normalização dos dados. O critério de fratura de Mar-Lin apresentou bom ajuste, mostrando-se adequado para o estudo de porosidade em compósitos. Por meio desse critério foi determinado que somente os laminados com porosidade acima de 0,9% para tecido de carbono/epóxi e acima de 0,75% para laminados de tape de carbono/epóxi é que apresentam redução de suas propriedades mecânicas

Project W-320, 241-C-106 sluicing electrical calculations, Volume 2

International Nuclear Information System (INIS)

Bailey, J.W.

1998-01-01

This supporting document has been prepared to make the FDNW calculations for Project W-320, readily retrievable. These calculations are required: To determine the power requirements needed to power electrical heat tracing segments contained within three manufactured insulated tubing assemblies; To verify thermal adequacy of tubing assembly selection by others; To size the heat tracing feeder and branch circuit conductors and conduits; To size protective circuit breaker and fuses; and To accomplish thermal design for two electrical heat tracing segments: One at C-106 tank riser 7 (CCTV) and one at the exhaust hatchway (condensate drain). Contents include: C-Farm electrical heat tracing; Cable ampacity, lighting, conduit fill and voltage drop; and Control circuit sizing and voltage drop analysis for the seismic shutdown system

Voltammetric determination of butylated hydroxyanisol in biodiesel, mineral and synthetic oils using gold electrode

Czech Academy of Sciences Publication Activity Database

Tomášková, M.; Chýlková, J.; Jehlička, V.; Navrátil, Tomáš; Šelešovská, R.

2013-01-01

Roč. 19, č. 2013 (2013), s. 155-172 ISSN 1211-5541 R&D Projects: GA ČR(CZ) GAP208/12/1645 Grant - others:GA ČR(CZ) GP13-21409P Program:GP Institutional support: RVO:61388955 Keywords : voltammetry * butylated hydroxyanisol * gold electrode Subject RIV: CF - Physical ; Theoretical Chemistry

Supplement analysis for the proposed upgrades to the tank farm ventilation, instrumentation, and electrical systems under Project W-314 in support of tank farm restoration and safe operations

International Nuclear Information System (INIS)

1997-05-01

The mission of the TWRS program is to store, treat, and immobilize highly radioactive tank waste in an environmentally sound, safe, and cost-effective manner. Within this program, Project W-314, Tank Farm Restoration and Safe Operations, has been established to provide upgrades in the areas of instrumentation and control, tank ventilation, waste transfer, and electrical distribution for existing tank farm facilities. Requirements for tank farm infrastructure upgrades to support safe storage were being developed under Project W-314 at the same time that the TWRS EIS alternative analysis was being performed. Project W-314 provides essential tank farm infrastructure upgrades to support continued safe storage of existing tank wastes until the wastes can be retrieved and disposed of through follow-on TWRS program efforts. Section4.0 provides a description of actions associated with Project W-314. The TWRS EIS analyzes the environmental consequences form the entire TWRS program, including actions similar to those described for Project W-314 as a part of continued tank farm operations. The TWRS EIS preferred alternative was developed to a conceptual level of detail to assess bounding impact areas. For this Supplement Analysis, in each of the potential impact areas for Project W-314, the proposed action was evaluated and compared to the TWRS EIS evaluation of the preferred alternative (Section 5.0). Qualitative and/or quantitative comparisons are then provided in this Supplement Analysis to support a determination on the need for additional National Environmental Policy Act (NEPA) analysis. Based on this Supplement Analysis, the potential impacts for Project W-314 would be small in comparison to and are bounded by the impacts assessed for the TWRS EIS preferred alternative, and therefore no additional NEPA analysis is required (Section 7.0)

Yeast Interacting Proteins Database: YOR117W, YJL184W [Yeast Interacting Proteins Database

Lifescience Database Archive (English)

Full Text Available c stress response, telomere uncapping and elongation, transcription; component of the EKC/KEOPS protein comp...n proposed to be involved in the modification of N-linked oligosaccharides, osmotic stress response, telomere uncap

Requirements Verification Report AN Farm to 200E Waste Transfer System for Project W-314, Tank Farm Restoration and Safe Operations

International Nuclear Information System (INIS)

MCGREW, D.L.

1999-01-01

This Requirements Verification Report (RVR) for Project W-314 ''AN Farm to 200E Waste Transfer System'' package provides documented verification of design compliance to all the applicable Project Development Specification (PDS) requirements. Additional PDS requirements verification will be performed during the project's procurement, construction, and testing phases, and the RVR will be updated to reflect this information as appropriate

Accident consequence calculations for project W-058 safety analysis

International Nuclear Information System (INIS)

Van Keuren, J.C.

1997-01-01

Accident consequence analyses have been performed for Project W-058, the Replacement Cross Site Transfer System. using the assumption and analysis techniques developed for the Tank Remediation Waste system Basis for Interim Operation. most potential accident involving the FISTS are bounded by the TWRS BIO analysis. However, the spray leak and pool leak scenarios require revised analyses since the RCSTS design utilizes larger diameter pipe and higher pressures than those analyzed in the TWRS BIO. Also the volume of diversion box and vent station are larger than that assumed for the valve pits in the TWRS BIO, which effects results of sprays or spills into the pits. the revised analysis for the spray leak is presented in Section 2, for the above ground spill in Section 3, for the presented in Section 2, for the above ground spill in Section 3, for the subsurface spill forming a pool in Section 4, and for the subsurface pool remaining subsurface in Section 5. The conclusion from these sections are summarized below

Project W-320 SAR and process control thermal analyses

International Nuclear Information System (INIS)

Sathyanarayana, K.

1997-01-01

This report summarizes the results of thermal hydraulic computer modeling supporting Project W-320 for process control and SAR documentation. Parametric analyses were performed for the maximum steady state waste temperature. The parameters included heat load distribution, tank heat load, fluffing factor and thermal conductivity. Uncertainties in the fluffing factor and heat load distribution had the largest effect on maximum waste temperature. Safety analyses were performed for off normal events including loss of ventilation, loss of evaporation and loss of secondary chiller. The loss of both the primary and secondary ventilation was found to be the most limiting event with saturation temperature in the bottom waste reaching in just over 30 days. An evaluation was performed for the potential lowering of the supernatant level in tank 241-AY-102. The evaluation included a loss of ventilation and steam bump analysis. The reduced supernatant level decreased the time to reach saturation temperature in the waste for the loss of ventilation by about one week. However, the consequence of a steam bump were dramatically reduced

Project W-314 specific test and evaluation plan for SN-633 transfer line (241-AX-B to 241-AY-02A)

International Nuclear Information System (INIS)

Hays, W.H.

1998-01-01

The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made by the addition of the SN-633 transfer line by the W-314 Project. The STEP develops the outline for test procedures that verify the system's performance to the established Project design criteria. The STEP is a lower tier document based on the W-314 Test and Evaluation Plan (TEP). This STEP encompasses all testing activities required to demonstrate compliance to the project design criteria as it relates to the addition of transfer line SN-633. The Project Design Specifications (PDS) identify the specific testing activities required for the Project. Testing includes Validations and Verifications (e.g., Commercial Grade Item Dedication activities), Factory Acceptance Tests (FATs), installation tests and inspections, Construction Acceptance Tests (CATs), Acceptance Test Procedures (ATPs), Pre-Operational Test Procedures (POTPs), and Operational Test Procedures (OTPs). It should be noted that POTPs are not required for testing of the transfer line addition. The STEP will be utilized in conjunction with the TEP for verification and validation

Can T1 w/T2 w ratio be used as a myelin-specific measure in subcortical structures? Comparisons between FSE-based T1 w/T2 w ratios, GRASE-based T1 w/T2 w ratios and multi-echo GRASE-based myelin water fractions.

Science.gov (United States)

Uddin, Md Nasir; Figley, Teresa D; Marrie, Ruth Ann; Figley, Chase R

2018-03-01

Given the growing popularity of T 1 -weighted/T 2 -weighted (T 1 w/T 2 w) ratio measurements, the objective of the current study was to evaluate the concordance between T 1 w/T 2 w ratios obtained using conventional fast spin echo (FSE) versus combined gradient and spin echo (GRASE) sequences for T 2 w image acquisition, and to compare the resulting T 1 w/T 2 w ratios with histologically validated myelin water fraction (MWF) measurements in several subcortical brain structures. In order to compare these measurements across a relatively wide range of myelin concentrations, whole-brain T 1 w magnetization prepared rapid acquisition gradient echo (MPRAGE), T 2 w FSE and three-dimensional multi-echo GRASE data were acquired from 10 participants with multiple sclerosis at 3 T. Then, after high-dimensional, non-linear warping, region of interest (ROI) analyses were performed to compare T 1 w/T 2 w ratios and MWF estimates (across participants and brain regions) in 11 bilateral white matter (WM) and four bilateral subcortical grey matter (SGM) structures extracted from the JHU_MNI_SS 'Eve' atlas. Although the GRASE sequence systematically underestimated T 1 w/T 2 w values compared to the FSE sequence (revealed by Bland-Altman and mountain plots), linear regressions across participants and ROIs revealed consistently high correlations between the two methods (r 2 = 0.62 for all ROIs, r 2 = 0.62 for WM structures and r 2 = 0.73 for SGM structures). However, correlations between either FSE-based or GRASE-based T 1 w/T 2 w ratios and MWFs were extremely low in WM structures (FSE-based, r 2 = 0.000020; GRASE-based, r 2 = 0.0014), low across all ROIs (FSE-based, r 2 = 0.053; GRASE-based, r 2 = 0.029) and moderate in SGM structures (FSE-based, r 2 = 0.20; GRASE-based, r 2 = 0.17). Overall, our findings indicated a high degree of correlation (but not equivalence) between FSE-based and GRASE-based T 1 w/T 2 w ratios, and low correlations between T 1 w/T 2 w ratios and MWFs. This

Modèles et méthodologies d’analyse des compétences. Le double éclairage des pratiques et des recherches de Hajjar et Baubion-Broye

Directory of Open Access Journals (Sweden)

Jacques Leplat

2005-11-01

Full Text Available Le thème des compétences est d’actualité et de nombreuses disciplines se sentent concernées par son étude, notamment différentes spécialités de la psychologie, de l’ergonomie et de la sociologie. Octares témoigne de cet intérêt puisqu’il a déjà édité deux ouvrages sur ce thème : Leplat, J. et de Montmollin, M. (eds. (2001. Les compétences en ergonomie. Recueil de textes. Dupray, A., Guitton, C. & Monchatre, S. (eds.. (2003. Réfléchir la compétence. Approches sociologiques, juridiques, éco...

Position paper: Live load design criteria for Project W-236A Multi-Function Waste Tank Facility

International Nuclear Information System (INIS)

Giller, R.A.

1995-01-01

The purpose of this paper is to discuss the live loads applied to the underground storage tanks of the Multi Function Waste Tank Facility, and to provide the basis for Project W-236A live load criteria. Project 236A provides encompasses building a Weather Enclosure over the two underground storage tanks at the 200-West area. According to the Material Handling Study, the Groves AT 1100 crane used within the Weather Enclosure will have a gross vehicle weight of 66.5 tons. Therefore, a 100-ton concentrated live load is being used for the planning of the construction of the Weather Enclosure

10 CFR 611.102 - Eligible project costs.

Science.gov (United States)

2010-01-01

... Accounting Principles and these costs may be considered by DOE in determining the Borrower's contribution to... 10 Energy 4 2010-01-01 2010-01-01 false Eligible project costs. 611.102 Section 611.102 Energy... PROGRAM Direct Loan Program § 611.102 Eligible project costs. (a) Eligible costs are: (1) Those costs that...

METHOD FOR SELECTION OF PROJECT MANAGEMENT APPROACH BASED ON FUZZY CONCEPTS

Directory of Open Access Journals (Sweden)

Igor V. KONONENKO

2017-03-01

Full Text Available Literature analysis of works that devoted to research of the selection a project management approach and development of effective methods for this problem solution is given. Mathematical model and method for selection of project management approach with fuzzy concepts of applicability of existing approaches are proposed. The selection is made of such approaches as the PMBOK Guide, the ISO21500 standard, the PRINCE2 methodology, the SWEBOK Guide, agile methodologies Scrum, XP, and Kanban. The number of project parameters which have a great impact on the result of the selection and measure of their impact is determined. Project parameters relate to information about the project, team, communication, critical project risks. They include the number of people involved in the project, the customer's experience with this project team, the project team's experience in this field, the project team's understanding of requirements, adapting ability, initiative, and others. The suggested method is considered on the example of its application for selection a project management approach to software development project.

Linearizing W-algebras

International Nuclear Information System (INIS)

Krivonos, S.O.; Sorin, A.S.

1994-06-01

We show that the Zamolodchikov's and Polyakov-Bershadsky nonlinear algebras W 3 and W (2) 3 can be embedded as subalgebras into some linear algebras with finite set of currents. Using these linear algebras we find new field realizations of W (2) 3 and W 3 which could be a starting point for constructing new versions of W-string theories. We also reveal a number of hidden relationships between W 3 and W (2) 3 . We conjecture that similar linear algebras can exist for other W-algebra as well. (author). 10 refs

1.8kW laser diode pumped YAG laser; Shutsuryoku 1.8kW no handotai laser reiki YAG laser

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Toshiba Corporation, as a participant in Ministry of International Trade and Industry`s `photon measurement and processing technology project` since August, 1997, is engaged in the development of an energy-efficient LD (laser diode) pumped semiconductor YAG (yttrium-aluminum-garnet) laser device to be used for welding and cutting. It is a 5-year project and the goal is a mean output of 10kW and efficiency of 20%. In this article, a simulation program is developed which carries out calculation about element technology items such as the tracking of the beam from the pumping LD and the excitation distribution, temperature distribution, thermal stress distribution, etc., in the YAG rod. An oscillator is constructed, based on the results of the simulation, and it exhibits a world-high class continuous laser performance of a 1.8kW output and 13% efficiency. The record of 13% efficiency is five times higher than that achieved by the conventional lamp-driven YAG laser device. (translated by NEDO)

How should collective and distributed skills be considered in professional skills management? Quelle prise en compte des compétences collectives et distribuées dans la gestion des compétences professionnelles ? Cómo tomar en cuenta las competencias colectivas y distribuidas en la gestión de las competencias profesionales ?

Directory of Open Access Journals (Sweden)

Catherine Delgoulet

2008-05-01

Full Text Available The purpose of this paper is to discuss how collective and distributed skills are considered in a professional competence management system by associating sociological and ergonomic work approaches. Collective work in companies is currently paradoxical: on the one hand, its value is increased through various forms of cooperation, and on the other hand, it is restricted in its makeup and sustainability by new kinds of employment. However, the results of our study, carried out in a large industrial and retailing company in a high-risk sector, highlight that a “single” and individual professional competence management system is a partial system. Work contexts should take into account technical specialties, changes in populations, changes in technology, etc. An efficient skills management system therefore ought to combine both individual and collective approaches in order to anticipate organizations that promote the development of collective and/or distributed skills, and training situations that promote their construction and transmission.L’objectif de cet article est de discuter de la prise en compte des compétences collectives et distribuées dans un dispositif de gestion des compétences en associant des approches sociologiques et ergonomiques du travail. Le travail collectif dans l’entreprise est aujourd’hui paradoxal : valorisé dans l’organisation par des formes variées de coopérations et contraint et fragilisé dans sa constitution et pérennité face à de nouvelles formes d’emploi. Cependant, les résultats de cette étude, réalisée dans une grande entreprise industrielle et commerciale d’un secteur à risques, montrent qu’un dispositif de gestion de compétences ne peut être « unique ». Il doit se décliner selon des contextes, des spécialités, des évolutions de populations, des évolutions technologiques, etc. Une articulation des points de vue individuel et collectif est nécessaire pour une gestion des

Quelle prise en compte des compétences collectives et distribuées dans la gestion des compétences professionnelles ? How should collective and distributed skills be considered in professional skills management? Cómo tomar en cuenta las competencias colectivas y distribuidas en la gestión de las competencias profesionales ?

Directory of Open Access Journals (Sweden)

Catherine Delgoulet

2008-05-01

Full Text Available L’objectif de cet article est de discuter de la prise en compte des compétences collectives et distribuées dans un dispositif de gestion des compétences en associant des approches sociologiques et ergonomiques du travail. Le travail collectif dans l’entreprise est aujourd’hui paradoxal : valorisé dans l’organisation par des formes variées de coopérations et contraint et fragilisé dans sa constitution et pérennité face à de nouvelles formes d’emploi. Cependant, les résultats de cette étude, réalisée dans une grande entreprise industrielle et commerciale d’un secteur à risques, montrent qu’un dispositif de gestion de compétences ne peut être « unique ». Il doit se décliner selon des contextes, des spécialités, des évolutions de populations, des évolutions technologiques, etc. Une articulation des points de vue individuel et collectif est nécessaire pour une gestion des compétences qui permette de prévoir : des organisations propices au développement des compétences distribuées ou collectives, des situations de formation favorisant leur construction et leur transmission.The purpose of this paper is to discuss how collective and distributed skills are considered in a professional competence management system by associating sociological and ergonomic work approaches. Collective work in companies is currently paradoxical: on the one hand, its value is increased through various forms of cooperation, and on the other hand, it is restricted in its makeup and sustainability by new kinds of employment. However, the results of our study, carried out in a large industrial and retailing company in a high-risk sector, highlight that a “single” and individual professional competence management system is a partial system. Work contexts should take into account technical specialties, changes in populations, changes in technology, etc. An efficient skills management system therefore ought to combine both

Superconductors and novel ceramics for future communication technologies. Project: Cooler and cryotechnology. Final report

International Nuclear Information System (INIS)

Haefner, H.U.; Rolff, N.; Thummes, G.

2004-02-01

The project involved the production of a 6W rate at 77K stirling chiller for a HTS telecommunication experiment on the 'International Space Station' (project partner Bosch Telecom) and the production of a prototype long-lived stirling pulsed tube chiller of 10W rate at 77K for future applications in telecommunication. The projected was terminated prematurely. The following results were obtained: 1. The low-capacity chiller 'Mono-Kaltfinger' (stirling cold finger with displacement piston) achieved up to 5.3% COP at 80 K. 2. The chilling capacity was 10 W at 80 K for a maximum compressor uptake of 250 W. 3. An efficient pulsed tube chiller was constructed, as well as 4. A long-lived compressor with flexure bearings. (orig.) [de

Partial deletions of the W chromosome due to reciprocal translocation in the silkworm Bombyx mori.

Science.gov (United States)

Abe, H; Seki, M; Ohbayashi, F; Tanaka, N; Yamashita, J; Fujii, T; Yokoyama, T; Takahashi, M; Banno, Y; Sahara, K; Yoshido, A; Ihara, J; Yasukochi, Y; Mita, K; Ajimura, M; Suzuki, M G; Oshiki, T; Shimada, T

2005-08-01

In the silkworm, Bombyx mori (female, ZW; male, ZZ), femaleness is determined by the presence of a single W chromosome, irrespective of the number of autosomes or Z chromosomes. The W chromosome is devoid of functional genes, except the putative female-determining gene (Fem). However, there are strains in which chromosomal fragments containing autosomal markers have been translocated on to W. In this study, we analysed the W chromosomal regions of the Zebra-W strain (T(W;3)Ze chromosome) and the Black-egg-W strain (T(W;10)+(w-2) chromosome) at the molecular level. Initially, we undertook a project to identify W-specific RAPD markers, in addition to the three already established W-specific RAPD markers (W-Kabuki, W-Samurai and W-Kamikaze). Following the screening of 3648 arbitrary 10-mer primers, we obtained nine W-specific RAPD marker sequences (W-Bonsai, W-Mikan, W-Musashi, W-Rikishi, W-Sakura, W-Sasuke, W-Yukemuri-L, W-Yukemuri-S and BMC1-Kabuki), almost all of which contained the border regions of retrotransposons, namely portions of nested retrotransposons. We confirmed the presence of eleven out of twelve W-specific RAPD markers in the normal W chromosomes of twenty-five silkworm strains maintained in Japan. These results indicate that the W chromosomes of the strains in Japan are almost identical in type. The Zebra-W strain (T(W;3)Ze chromosome) lacked the W-Samurai and W-Mikan RAPD markers and the Black-egg-W strain (T(W;10)+(w-2) chromosome) lacked the W-Mikan RAPD marker. These results strongly indicate that the regions containing the W-Samurai and W-Mikan RAPD markers or the W-Mikan RAPD marker were deleted in the T(W;3)Ze and T(W;10)+(w-2) chromosomes, respectively, due to reciprocal translocation between the W chromosome and the autosome. This deletion apparently does not affect the expression of Fem; therefore, this deleted region of the W chromosome does not contain the putative Fem gene.

A new approach to cost effective projects: High performance project teams

International Nuclear Information System (INIS)

Chambers, N.C.

1994-01-01

In low oil price environment in which environmental conditions are more challenging, reservoir characteristics less favourable and political risk increasing, successful projects are required in such cases. The present paper deals with the visionary process of establishing high performance project teams. According to the author, such project teams embody dynamic recognition of holism. Holism is achieved as an output from the process of establishing the drivers and enablers for success on a project. They are given birth during the unfolding of the operators development plans and contracting strategy. The paper discusses the main drivers of project teams comprising purpose and performance goals, selection, common approach, commitment and accountability, and financial alignment

A new approach to cost effective projects: High performance project teams

Energy Technology Data Exchange (ETDEWEB)

Chambers, N.C. [Brown and Root Energy Services (United Kingdom)

1994-12-31

In low oil price environment in which environmental conditions are more challenging, reservoir characteristics less favourable and political risk increasing, successful projects are required in such cases. The present paper deals with the visionary process of establishing high performance project teams. According to the author, such project teams embody dynamic recognition of holism. Holism is achieved as an output from the process of establishing the drivers and enablers for success on a project. They are given birth during the unfolding of the operators development plans and contracting strategy. The paper discusses the main drivers of project teams comprising purpose and performance goals, selection, common approach, commitment and accountability, and financial alignment

Integrating a Project Management Approach to E-Business Application Course

Science.gov (United States)

Chen, Kuan C.; Chuang, Keh-Wen

2008-01-01

Teaching students project managements requires a hands-on approach. Incorporating project management concepts and processes into a student team Web development project adds a dimension that exposes students to the realities of effective Web development. This paper will describe the project management approach used in a Web development course in…

The enhancement of environmental literacy of High School students within the Sparkling Science project "Traisen w3"

Science.gov (United States)

Poppe, Michaela; Zitek, Andreas; Böck, Kerstin; Scheikl, Sigrid; Heidenreich, Andrea; Kurz-Aigner, Roman; Schrittwieser, Martin; Muhar, Susanne

2015-04-01

Environmental literacy is the knowledge necessary to understand the environment as an ecological system. It comprises the insight in the impact of human behaviour on the natural world and the disposition and motivation to apply ones knowledge, skills and insight in order to make environmentally beneficial decisions as rational citizen. The United Nations Environmental Programme states that young people will face major challenges in providing sufficient water and food, generating energy and adapting to climate change in future. Dealing with these challenges will require a major contribution from science and technology. But even more important, it is an issue of education to transfer the required system understanding as a basis to take informed decisions. In this way an education towards environmental literacy contributes significantly to the personal, social, and professional lives of young people, plays therefore a central role in young person`s "preparedness for life", and is a major prerequisite for sustainable development. For the purpose of developing new and engaging forms of learning, "Sparkling Science" projects are funded by the Federal Ministry of Science, Research and Economy in Austria. These projects target at integrating science with school learning by involving young people into scientific research. Within the Sparkling Science Projects "FlussAu:WOW" and" "Traisen.w3" scientists work together with 15-18-year-old students of an Austrian High School over four years. The projects aim to assess and evaluate crucial functions and processes of riverine landscapes particularly considering the floodplain area in near natural and anthropogenically changed landscapes. Within the first project "FlussAu:WOW" (2012-2014), students and scientists elaborated on indicators for assessing and evaluating the ecological functionality of floodplains and rivers. In a case study in the "Traisen.w3" project (2014-2016), scientists and students will focus at the catchment

Signatures of Parton Exogamy in e+ e- -> W+ W- -> hadrons

OpenAIRE

Ellis, John; Geiger, Klaus

1997-01-01

We propose possible signatures of `exogamous' combinations between partons in the different W+ and W- hadron showers in e+e- -> W+W- events with purely hadronic final states. Within the space-time model for hadronic shower development that we have proposed previously, we find a possible difference of about 10 % between the mean hadronic multiplicity in such purely hadronic final states and twice the hadronic multiplicity in events in which one W decays hadronically and the other leptonically,...

High power pulsed/microwave technologies for electron accelerators vis a vis 10MeV, 10kW electron LINAC for food irradiation at CAT

International Nuclear Information System (INIS)

Shrivastava, Purushottam; Mulchandani, J.; Mohania, P.; Baxy, D.; Wanmode, Y.; Hannurkar, P.R.

2005-01-01

Use of electron accelerators for irradiation of food items is gathering momentum in India. The various technologies for powering the electron LINAC were needed to be developed in the country due to embargo situations as well as reservations of the developers worldwide to share the information related to this development. Centre for Advanced Technology, CAT, Indore, is engaged in the development of particle accelerators for medical industrial and scientific applications. Amongst other electron accelerators developed in CAT, a 10MeV, 10kW LINAC for irradiation of food items has been commissioned and tested for full rated 10kW beam power. The high power pulsed microwave driver for the LINAC was designed, developed and commissioned with full indigenous efforts, and is right now operational at CAT. It consists of a 6MW, 25kW S-band pulsed klystron, 15MW peak power pulse modulator system for the klystron, microwave driver amplifier chain, stabilized generator, protection and control electronics, waveguide system to handle the high peak and average power, gun modulator electronics, grid electronics etc. The present paper highlights various technologies like the pulsed power systems and components, microwave circuits and systems etc. Also the performance results of the high power microwave driver for the 10MeV LINAC at CAT are discussed. Future strategies for developing the state of art technologies are highlighted. (author)

Analysis of problem solving on project based learning with resource based learning approach computer-aided program

Science.gov (United States)

Kuncoro, K. S.; Junaedi, I.; Dwijanto

2018-03-01

This study aimed to reveal the effectiveness of Project Based Learning with Resource Based Learning approach computer-aided program and analyzed problem-solving abilities in terms of problem-solving steps based on Polya stages. The research method used was mixed method with sequential explanatory design. The subject of this research was the students of math semester 4. The results showed that the S-TPS (Strong Top Problem Solving) and W-TPS (Weak Top Problem Solving) had good problem-solving abilities in each problem-solving indicator. The problem-solving ability of S-MPS (Strong Middle Problem Solving) and (Weak Middle Problem Solving) in each indicator was good. The subject of S-BPS (Strong Bottom Problem Solving) had a difficulty in solving the problem with computer program, less precise in writing the final conclusion and could not reflect the problem-solving process using Polya’s step. While the Subject of W-BPS (Weak Bottom Problem Solving) had not been able to meet almost all the indicators of problem-solving. The subject of W-BPS could not precisely made the initial table of completion so that the completion phase with Polya’s step was constrained.

On the origin of W-algebras

International Nuclear Information System (INIS)

Bilal, A.; Kogan, I.I.

1991-01-01

We show that the complex and projective structures on 2D Riemann surfaces are determined by the solutions to the linear differential equations obtained by the hamiltonian reduction of Sl(2,C) connections by the gauge parabolic subgroup. The compatibility of complex (μ) and projective (T) structures appears as the associated zero-curvature condition on the reduced symplectic manifold and is nothing but the conformal Ward identity. Generalizing this construction to the reduction of Sl(n,C) connections by the maximal parabolic gauge subgroup, we obtain generalized complex (μ,ρ,...) and projective (T,W,...) structures. From their compatibility conditions we explicitly obtain the Ward identities of W n -gravity and the operator product expansions of the W n -algebras. The associated linear differential equations (one of which involves the basic differential operator of the nth reduction of the KP hierarchy) allow for a geometric interpretation of the W-symmetries in terms of deformations of flag configurations in the jet bundle Γ (n-1) . We also show how to derive the W n -Ward identities from the quantization of the (2+1)-dimensional Chern-Simons theory. (orig.)

Dynamic Consolidation and Investigation of Nanostructural W-Cu / W-Y Cylindrical Billets

Science.gov (United States)

Godibadze, B.; Dgebuadze, A.; Chagelishvili, E.; Mamniashvili, G.; Peikrishvili, A.

2018-03-01

The main purpose of presented work is to obtain W-Cu & W-Y cylindrical bulk nanostructured billets by explosive consolidation technology (ECT) in hot condition, with low porosity near to theoretical densities and improved physical / mechanical properties. Nanocomposites were subjected to densification into cylindrical steel tube containers using hot explosive consolidation (HEC) technology to fabricate high dense cylindrical billets. The first stage : Preliminary explosive densification of the precursor powder blend is carried out at room temperature with a loading intensity up to 10GPa to increase the initial density and to activate the particle surfaces in the blend. The second stage investigation were carried out for the same already predensified billets, but consolidation were conducted in hot conditions, after heating of samples in between 940-11000C, the intensity of loading was equal to 10GPa. Consolidated different type of W-Cu composition containing 10-40% of nanoscale W, during investigation showed that the combination of high temperatures (above 940°C) and two-stage shock wave compression was beneficial to the consolidation of the incompatible pair W-Cu composites, resulting in high densities, good integrity and good electronic properties. The structure and property of the samples obtained, depended on the sizes of tungsten particles. It was established that in comparison with W-Cu composites with coarse tungsten the application of nanoscale W precursors and depending of content of W gives different result. Tungsten is a prime material candidate for the first wall of a future fusion reactor. In this study, the microstructure and microhardness of tungsten-yttrium (W-Y) composites were investigated as a function of Y doping content (0.5÷2 wt. %). It was found that the crystallite sizes and the powder particle sizes were increased as a result of the increase of Y content. Nearly fully dense materials were obtained for W-Y alloys when the Y content was

A 10kW series resonant converter design, transistor characterization, and base-drive optimization

Science.gov (United States)

Robson, R.; Hancock, D.

1981-01-01

Transistors are characterized for use as switches in resonant circuit applications. A base drive circuit to provide the optimal base drive to these transistors under resonant circuit conditions is developed and then used in the design, fabrication and testing of a breadboard, spaceborne type 10 kW series resonant converter.

El programa “Regla y compás”. Una experiencia utilizando un software gratuito para generar ambientes de aprendizaje en matemática

Directory of Open Access Journals (Sweden)

Zuleyka Suárez Valdes-Ayala

2004-12-01

Full Text Available The program “Regla y Compás” (“Ruler and Compasses” is useful to support the teaching of Math processes in geometry by means of a computer. One of the advantages it offers is that it may be obtained gratuitously in the internet. The way in which this type of programs allows for corporative and interdisciplinary work will by analyzed. For this purpose, the experiences obtained during the research project “Teaching high school mathematics whit free online software: The Ruler and Compasses case” will be discussed. The latter enabled the elaboration of tree manuals: “User's manual”, “Student's manual” and Teacher`s manual”. The objective is to facilitate the teaching of geometry through 32 practice and learning sessions.

PROJECT APPROACH TO ENERGY MANAGEMENT

Directory of Open Access Journals (Sweden)

Інга Борисівна СЕМКО

2016-02-01

Full Text Available Project management is widely used around the world as a tool to improve business performance. Correct implementation of the program of implementation of energy efficiency is accompanied by the adoption of an appropriate legislative framework, support programs, the approval of market-based instruments. Currently, it is paying enough attention to the effective application of market-based instruments, although most of the activities in the field of energy efficiency from the economic side are quite profitable. The authors suggested the use of the methodology of project management to the management of energy-saving measures, new approaches to the place and role of project management in the hierarchy of guidance. As a result, this innovation can improve the competitiveness of enterprises. The conclusions that the energy-saving project management allows you to get the best results for their implementation by reducing the time, resources, risk reduction.

W-jet tagging: Optimizing the identification of boosted hadronically-decaying W bosons

International Nuclear Information System (INIS)

Cui Yanou; Han Zhenyu; Schwartz, Matthew D.

2011-01-01

A method is proposed for distinguishing highly boosted hadronically-decaying W's (W jets) from QCD-jets using jet substructure. Previous methods, such as the filtering/mass-drop method, can give a factor of ∼2 improvement in S/√(B) for jet p T > or approx. 200 GeV. In contrast, a multivariate approach including new discriminants such as R cores, which characterize the shape of the W jet, subjet planar flow, and grooming-sensitivities is shown to provide a much larger factor of ∼5 improvement in S/√(B). For longitudinally polarized W's, such as those coming from many new physics models, the discrimination is even better. Comparing different Monte Carlo simulations, we observe a sensitivity of some variables to the underlying event; however, even with a conservative estimates, the multivariate approach is very powerful. Applications to semileptonic WW resonance searches and all-hadronic W+jet searches at the LHC are also discussed. Code implementing our W-jet tagging algorithm is publicly available at http://jets.physics.harvard.edu/wtag.

A Project Management Approach to Using Simulation for Cost Estimation on Large, Complex Software Development Projects

Science.gov (United States)

Mizell, Carolyn; Malone, Linda

2007-01-01

It is very difficult for project managers to develop accurate cost and schedule estimates for large, complex software development projects. None of the approaches or tools available today can estimate the true cost of software with any high degree of accuracy early in a project. This paper provides an approach that utilizes a software development process simulation model that considers and conveys the level of uncertainty that exists when developing an initial estimate. A NASA project will be analyzed using simulation and data from the Software Engineering Laboratory to show the benefits of such an approach.

Avaliação das propriedades mecânicas e morfológicas de compósitos de PEAD com pó de Pinus taeda e alumina calcinada

Directory of Open Access Journals (Sweden)

Karine Grison

2015-08-01

Full Text Available ResumoNeste estudo foram desenvolvidos compósitos utilizando PEAD, pó de madeira (Pinus taeda, alumina calcinada e dois diferentes tipos de agentes compatibilizantes para avaliação das propriedades morfológicas e mecânicas dos mesmos. Para aumentar a interação entre a matriz polimérica e o pó de madeira foram utilizados 2% de polietileno graftizado com anidrido maleico em todas as formulações. Para efeito comparativo foi desenvolvida uma formulação com viniltrietoxisilano como compatibilizante para a alumina calcinada. O teor de cargas variou de 4% a 33% para os compósitos de carga única e mantiveram o percentual de 28% para os compósitos com as duas cargas. A interação entre a matriz polimérica e as cargas, proporcionada pelo agente compatibilizante anidrido maleico, foi observada nas micrografias da interface da matriz/carga. A utilização do silano não proporcionou efeito adicional nas propriedades mecânicas dos compósitos. Os compósitos isentos de alumina apresentaram maior resistência à tração, porém na resistência à flexão a presença da alumina contribuiu para o aumento desta propriedade provavelmente devido à pequena interação existente entre a interface do seu grão e a matriz polimérica.

Physics design of a 10 MeV, 6 kW travelling wave electron linac

Indian Academy of Sciences (India)

We present the physics design of a 10 MeV, 6 kW S-band (2856 MHz) electron linear accelerator (linac), which has been recently built and successfully operated at Raja Ramanna Centre for Advanced Technology, Indore. The accelerating structure is a 2 π / 3 mode constant impedance travelling wave structure, which ...

Project W-236A, work plan for preparation of a design requirements document

International Nuclear Information System (INIS)

Groth, B.D.

1995-01-01

This work plan outlines the tasks necessary, and defines the organizational responsibilities for preparing a Design Requirements Document (DRD) for project W-236A, Multi-Function Waste Tank Facility (MWTF). A DRD is a Systems Engineering document which bounds, at a high level, the requirements of a discrete system element of the Tank Waste Remediation System (TWRS) Program. This system element is usually assigned to a specific project, in this case the MWTF. The DRD is the document that connects the TWRS program requirements with the highest level projects requirements and provides the project's link to the overall TWRS mission. The MWTF DRD effort is somewhat unique in that the project is already in detailed design, whereas a DRO is normally prepared prior to preliminary design. The MWTF design effort was initiated with a Functional Design Criteria (FDC) and a Supplemental Design Requirements Document (SDRD) bounding the high level requirements. Another unique aspect of this effort is that some of the TWRS program requirements are still in development. Because of these unique aspects of the MWTF DRD development, the MWTF will be developed from existing TWRS Program requirements and project specific requirements contained in the FDC and SDRD. The following list describes the objectives of the MWTF DRD: determine the primary functions of the tanks through a functional decomposition of the TWRS Program high level functions; allocate the primary functions to a sub-system architecture for the tanks; define the fundamental design features in terms of performance requirements for the system and subsystems; identify system interfaces and design constraints; and document the results in a DRD

Anticipated Radiological Dose to Worker for Plutonium Stabilization and Handling at PFP - Project W-460

International Nuclear Information System (INIS)

WEISS, E.V.

2000-01-01

This report provides estimates of the expected whole body and extremity radiological dose, expressed as dose equivalent (DE), to workers conducting planned plutonium (Pu) stabilization processes at the Hanford Site Plutonium Finishing Plant (PFP). The report is based on a time and motion dose study commissioned for Project W-460, Plutonium Stabilization and Handling, to provide personnel exposure estimates for construction work in the PFP storage vault area plus operation of stabilization and packaging equipment at PFP

Anticipated Radiological Dose to Worker for Plutonium Stabilization and Handling at PFP - Project W-460

CERN Document Server

Weiss, E V

2000-01-01

This report provides estimates of the expected whole body and extremity radiological dose, expressed as dose equivalent (DE), to workers conducting planned plutonium (Pu) stabilization processes at the Hanford Site Plutonium Finishing Plant (PFP). The report is based on a time and motion dose study commissioned for Project W-460, Plutonium Stabilization and Handling, to provide personnel exposure estimates for construction work in the PFP storage vault area plus operation of stabilization and packaging equipment at PFP.

W-symmetry, topological vertex and affine Yangian

Czech Academy of Sciences Publication Activity Database

Procházka, Tomáš

2016-01-01

Roč. 2016, č. 10 (2016), s. 1-73, č. článku 077. ISSN 1029-8479 R&D Projects: GA ČR GBP201/12/G028 Institutional support: RVO:68378271 Keywords : conformal field theory * W symmetry * integrability * Yangian * topological string Subject RIV: BE - Theoretical Physics OBOR OECD: Atomic, molecular and chemical physics (physics of atoms and molecules including collision, interaction with radiation, magnetic resonances, Mössbauer effect) Impact factor: 6.063, year: 2016

Zmienność zasobów termicznych w Polsce w aspekcie obserwowanych zmian klimatu

Directory of Open Access Journals (Sweden)

Agnieszka Sulikowska

2016-06-01

Full Text Available Obserwowany wzrost temperatury powietrza na półkuli północnej, zwłaszcza w Europie, może prowadzić do znacznych zmian w fenologii roślin, a w konsekwencji także w produkcji rolnej. Celem pracy jest ocena zróżnicowania przestrzennego zasobów termicznych na obszarze Polski oraz ich zmienności w okresie 1951–2010 w obliczu zmieniających się warunków termicznych. Analizę przeprowadzono z wykorzystaniem dobowych wartości temperatury powietrza. Zasoby termiczne zdefiniowane zostały za pomocą sum temperatur efektywnych (Growing Degree Days – GDD obliczonych dla wartości progowych temperatury powietrza: 0°C, 5°C i 10°C. Następstwem analizy zróżnicowania przestrzennego zasobów termicznych była ocena ich zmienności wieloletniej oraz tendencji zmian. Badania objęły w szczególności regiony sadownicze odznaczające się największą powierzchnią upraw drzew owocowych oraz wielkością zbiorów jabłek, śliw i wiśni. Uzyskane wyniki potwierdzają zwiększenie zasobów termicznych na obszarze kraju, będące konsekwencją wydłużającego się okresu wegetacyjnego.

Generation of 320 mW at 10.20 μm based on CdSe long-wave infrared crystal

Science.gov (United States)

Wang, Jian; Yuan, Ligang; Zhang, Yingwu; Chen, Guo; Cheng, Hongjuan; Gao, Yanzhao

2018-06-01

CdSe single crystal, with the sizes of ∼54 mm in diameter and ∼25 mm in length, was grown by a high pressure vertical gradient freeze (HPVGF) technique using (0 0 1)-oriented seed. The CdSe crystal was characterized with transmission spectrophotometer. The transmission spectra showed that the infrared transmission was above 68% and the mean absorption coefficient was 0.041 cm-1 in the range of 2.5-20 μm. Using fabricated CdSe crystal with the dimensions of 6 mm × 10 mm × 44 mm, we demonstrated an optical parametric oscillator (OPO) pumped by a 2.05 μm Ho:YLF laser at a pulse repetition frequency of 5 kHz. Up to 320 mW output was obtained at the idler wavelength of 10.20 μm with a pump power of 18.06 W. 320 mW at 10.20 μm, to our knowledge, was the highest power obtained with a 2.05 μm laser-pumped CdSe OPO.

A Project Approach to Teaching Aquaculture and Entrepreneurial Skills in the Cage Culture of Salmonids Program at the Marine Institute.

Science.gov (United States)

Churchill, Edgar; Smith, Boyd

Between September and December 1986, the Marine Institute in Newfoundland, Canada, used a "projects approach" to train aquaculture workers for 10 new salmon farms to be opened in spring 1987 by a producers' cooperative. The projects approach combined instruction in the aquaculture skills needed to operate a salmon farm and the entrepreneurial…

Resposta tecidual ao compósito 50% hidroxiapatita: 50% poli-hidroxibutirato para substituição óssea em coelhos Tissue response to the composite 50% hydroxyapatite: 50% polyhydroxybutyrate for bone substitution in rabbits

Directory of Open Access Journals (Sweden)

E.C. Carlo

2009-08-01

Full Text Available Avaliaram-se a biocompatibilidade, a osseointegração, a osseocondução e a biodegradação de compósitos de 50% hidroxiapatita (HAP-91® e 50% poli-hidroxibutirato. O compósito foi implantado em defeitos ósseos em 12 coelhos (grupo experimental, sendo comparado a defeitos não preenchidos (grupo-controle, de igual número. Os parâmetros clínicos dor, claudicação, infecção, deiscência e edema foram avaliados nos primeiros oito dias após a cirurgia e aos 45 e 90 dias. Radiografias foram realizadas aos oito, 45 e 90 dias após a cirurgia em quatro animais por grupo que, em seguida, foram submetidos à eutanásia para coleta de amostras destinadas a análises histológica e histomorfométrica. Não ocorreram diferenças entre os grupos para todos os parâmetros clínicos. Radiografias demonstraram um compósito com radiopacidade semelhante à do osso vizinho e contato direto entre osso e compósito aos 45 e 90 dias. Diferença significativa foi observada entre a porcentagem dos tecidos ósseo e conjuntivo dentro do defeito nos dias oito, 45 e 90, assim como na interface aos 45 e 90 dias. Foram observadas projeções dos tecidos ósseo e conjuntivo no interior do compósito e sinais de biodegradação na ausência de infiltrado inflamatório. Pode-se concluir que o compósito é biocompatível, osseocondutor, biodegradável e se integra ao tecido ósseo.The biocompatibility, osseointegration, osseoconductivity, and biodegradation of a 50-50% hydroxyapatite (HAP-91®-polyhydroxybutyrate were evaluated. The composite was implanted in bone defects of 12 rabbits (experimental group, being compared to unfilled defects (control group, 12 animals. The clinical parameters of pain, lameness, infection, dehiscence, and edema were evaluated during the first eight days and on the 45th and 90th days after surgery. Radiographs were taken in four animals per group at 8, 45, and 90 days after surgery, when animals were euthanized to collect samples for

Chenu F. (2015). L’évaluation des compétences professionnelles. Une mise à l'épreuve des notions et présupposés théoriques sous-jacents

OpenAIRE

Wittorski, Richard

2016-01-01

Dans son ouvrage intitulé L’évaluation des compétences professionnelles, Florent Chenu s’intéresse à une question « chargée » tant sur le plan scientifique (définitions multiples du terme compétence, souvent aujourd’hui considéré comme un « mot valise ») que sur le plan social (des enjeux et débats sociaux vifs concernant les modalités d’évaluation des compétences et, au-delà, concernant la façon de les reconnaître dans les milieux du travail). Dans ce contexte particulier, proposer une publi...

How the Project Approach Challenges Young Children

Science.gov (United States)

Burns, Marcia V.; Lewis, Alisha L.

2016-01-01

In this article, educators at University Primary School in Champaign, Illinois, share examples and understandings of the ways The Project Approach challenges young children to think critically about topics of importance in their world. Project investigations that provoke academic and social challenges for individuals and classroom communities of…

Regional Integrated Silvopastoral Approaches to Ecosystem Management Project

OpenAIRE

CIPAV (Centre For Research on Sustainable Agricultural Production Systems); CATIE (Centro Agronomico Tropical de Investigacion y Ensenanza); NITLAPAN

2007-01-01

Metadata only record The Regional Integrated Silvopastoral Approaches to Ecosystem Management Project introduces the payment for environmental services approach to silvopastoral farmers in Colombia, Costa Rica, and Nicaragua. The objectives of the project are to "demonstrate and measure a) the effects the introduction of payment incentives for environmental services to farmers on their adoption of integrated silvopastoral farming systems in degraded pasture lands; and b) the resulting impr...

Interaction of bentonite with dodecyl-benzyl-dimethylammonium bromide and N(1-(ethoxy carbonyl)penta-decyl)trimethylammonium bromide

Czech Academy of Sciences Publication Activity Database

Kalousová, J.; Votinský, J.; Beneš, Ludvík; Melánová, Klára; Zima, Vítězslav

1998-01-01

Roč. 4, - (1998), s. 65-73 ISSN 1211-5541 R&D Projects: GA ČR GA203/97/1010; GA AV ČR KSK2050602 Grant - others:Klíčový projekt AV ČR(CZ) No.12 Institutional research plan: CEZ:MSM 253100101; CEZ:AV0Z4050913 Subject RIV: CA - Inorganic Chemistry

Conflict Approaches of Effective Project Manager in the Upstream Sector of Indonesian Oil & Gas Industry

Directory of Open Access Journals (Sweden)

Adhi Cahyono

2012-11-01

Full Text Available Normal 0 false false false IN X-NONE AR-SA MicrosoftInternetExplorer4 Conflict can be functional or dysfunctional to the organization’s performance. This study focused on the relationship between conflict approaches implemented by the project manager based on project team member’s perception on the effectiveness of the project manager in managing project’s conflict. Questionnaires were modified from Barker et al. (1988 to measure conflict management approaches and outcomes of managing project conflict. Data were gathered from 57 respondents who worked in the Engineering, Procurement, and Construction (EPC contractors serving the upstream sector of the Oil and Gas industry in Indonesia. By using Pearson correlation, result of this study indicated that project managers were perceived to be effective in managing project conflict when implementing cooperative and confi rmative approaches, but ineffective when combining competitive and avoidance approaches. Further research should investigate correlation between cultural dimensions with conflict approaches and outcomes of managing conflict. Keywords: Conflict approaches, effective project manager, EPC contractors, upstream sector of oil and gas industry /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

Compósitos à base de gesso com resíduos de EVA e vermiculita Gypsum-based composites with EVA waste and vermiculite

Directory of Open Access Journals (Sweden)

Marilia P. de Oliveira

2012-06-01

Full Text Available O gesso é um dos materiais de construção mais antigos de que se tem conhecimento. Algumas de suas propriedades lhes conferem vantagens, tais como resistência ao fogo e isolamentos térmico e acústico. Objetivou-se, com este trabalho, avaliar as propriedades físico-mecânicas de compósitos à base de gesso com a incorporação de resíduos da indústria de calçados, o etileno acetato de vinila (EVA e a vermiculita. O desenvolvimento desses compósitos tem como propósito a produção de elementos de revestimento para proteção térmica de alvenarias. Para determinar a influência dos teores de resíduo de EVA e vermiculita e da relação água/gesso nas propriedades massa específica aparente e nas resistências a flexão e a compressão, foram incorporados cinco diferentes percentuais desses materiais, combinados com três relações água/gesso. Os resultados foram analisados por meio da estatística multivariável e indicaram que a massa específica aparente de ambos os compósitos e a resistência à flexão do compósito com vermiculita, mostraram maior dependência da relação água/gesso; por sua vez, o percentual de agregado apresentou maior influência na resistência à flexão do compósito com EVA e na resistência a compressão de ambos os compósitos.Gypsum is one of the oldest known building materials. Some of its properties confer advantages such as fire resistance, thermal and acoustic insulation. This work aims to study the physical and mechanical properties of gypsum-based composite with the incorporation of residues from the footwear industry ethylene vinyl acetate (EVA and vermiculite. The aim to develop these composites is to produce components for thermal protection of masonry. To determine the influence of different residue levels of EVA and vermiculite, and the water/plaster ratio on the bulk density, flexural and compressive strength, five different percentages of these materials were incorporated combined with

Physician Practice Patterns Within an Acute Care Facility.

Science.gov (United States)

1986-01-01

2.2 Severe or complete 0 2 Same as 2.1 Uterine Prolapse 2.3 W Ulceration 1 1 Same as 2.1 with Ulceration of Cervix Diagnostic Category - Endometriosis...d) suckling pigs, (e) mermaids, (f) fabulous ones, (g) stray dogs , (h) those that are included in this classification, (i) those that tremble as if...83 84 Evidence 1.1 Ltd Ovary 10 7 Physical Findings Diagnostic Category - Uterine Fibroma Supporting Stg Desc 83 84 Evidence 1.0 W/O Comp 62 58

JAERI 10kW High Power ERL-FEL and Its Applications in Nuclear Energy Industries

CERN Document Server

Minehara, E J; Iijima, H; Kikuzawa, N; Nagai, R; Nishimori, N; Nishitani, T; Sawamura, M; Yamauchi, T

2005-01-01

The JAERI high power ERL-FEL has been extended to the more powerful and efficient free-electron laser (FEL) than 10kW for nuclear energy industries, and other heavy industries like defense, shipbuilding, chemical industries, environmental sciences, space-debris, and power beaming and so on. In order to realize such a tunable, highly-efficient, high average power, high peak power and ultra-short pulse FEL, we need the efficient and powerful FEL driven by the JAERI compact, stand-alone and zero boil-off super-conducting RF linac with an energy-recovery geometry. Our discussions on the ERL-FEL will cover the current status of the 10kW upgrading and its applications of non-thermal peeling, cutting, and drilling to decommission the nuclear power plants, and to demonstrate successfully the proof of principle prevention of cold-worked stress-corrosion cracking failures in nuclear power reactors under routine operation using small cubic low-Carbon stainless steel samples.

Compósitos biodegradáveis de polihidroxibutirato (PHB reforçado com farinha de madeira: propriedades e degradação

Directory of Open Access Journals (Sweden)

José Claudio Caraschi

2002-04-01

Full Text Available O objetivo deste trabalho foi preparar e avaliar compósitos poliméricos mais compatíveis com o ambiente, ou seja, a obtenção de materiais que sejam biodegradáveis e que apresentem uma maior velocidade de degradação no ambiente. Os compósitos foram preparados a partir do plástico biodegradável polihidroxibutirato (PHB com e sem reforço de farinha de madeira, um resíduo agroindustrial, nas proporções de 10% a 40% em massa, pelo processo de extrusão e moldagem por injeção. As amostras foram avaliadas quanto à estabilidade dimensional, à absorção de água, à resistência química e à degradação natural em cinco diferentes situações ambientais, por diversos períodos de tempo. Os resultados obtidos indicaram que todas as amostras sofreram degradações evidenciadas pela perda de massa e pela descoloração em todas as situações avaliadas, e que a utilização de farinha de madeira resultou em materiais com menor resistência química e maiores taxa de absorção de umidade e velocidade de degradação no ambiente.

Final Technical Report: The Water-to-Wire (W2W) Project

Energy Technology Data Exchange (ETDEWEB)

Lissner, Daniel N. [Free Flow Power Corporation, Boston, MA (United States); Edward, Lovelace C. [Free Flow Power Corporation, Boston, MA (United States)

2013-12-24

The purpose of the Free Flow Power (FFP) Water-to-Wire Project (Project) was to evaluate and optimize the performance, environmental compatibility, and cost factors of FFP hydrokinetic turbines through design analyses and deployments in test flumes and riverine locations.

Deployed Flight Test of the Iraqi Air Force Comp Air 7SLX (CA-7)

Science.gov (United States)

2014-02-28

been built with a castering nose wheel mounted to the engine mount, a simple yet effective design. The team purchased new engine mounts and castering ...nose wheels from Aero Comp Inc. to solve these problems on all the CA-7s they refurbished, which Fred Webster called “a pretty big modification .”22...from a Cessna 310. The UAE had made numerous other modifications .2 The United States Central Command Air Forces (CENTAF) was working with the

Development of high average power industrial Nd:YAG laser with peak power of 10 kW class

International Nuclear Information System (INIS)

Kim, Cheol Jung; Kim, Jeong Mook; Jung, Chin Mann; Kim, Soo Sung; Kim, Kwang Suk; Kim, Min Suk; Cho, Jae Wan; Kim, Duk Hyun

1992-03-01

We developed and commercialized an industrial pulsed Nd:YAG laser with peak power of 10 kW class for fine cutting and drilling applications. Several commercial models have been investigated in design and performance. We improved its quality to the level of commercial Nd:YAG laser by an endurance test for each parts of laser system. The maximum peak power and average power of our laser were 10 kW and 250 W, respectively. Moreover, the laser pulse width could be controlled from 0.5 msec to 20 msec continuously. Many optical parts were localized and lowered much in cost. Only few parts were imported and almost 90% in cost were localized. Also, to accellerate the commercialization by the joint company, the training and transfer of technology were pursued in the joint participation in design and assembly by company researchers from the early stage. Three Nd:YAG lasers have been assembled and will be tested in industrial manufacturing process to prove the capability of developed Nd:YAG laser with potential users. (Author)

500 keV, 10 kW DC electron accelerator at BRIT, Vashi

International Nuclear Information System (INIS)

Sharma, D.K.; Rajan, R.N.; Bakhtsingh, R.I.; Acharya, S.; Rajawat, R.K.

2017-01-01

The 500 keV DC accelerator was indigenously designed and developed by Accelerator and Pulse Power Division, BARC during 1994-97 and commissioned at REPF Hall, BRIT, Vashi on 10"t"h August, 1998. The accelerator operation at 3kW beam power for 8 hour shifts was established in February 2001, confirming to industrial standards for EB treatment of plastic sheets as well as various surface-treatment processes for value addition of the products and materials. Since then, this EB facility is functional and being regularly utilized for various applications

Compósitos à base de cimento reforçados com polpa celulósica de bambu. Parte I: Determinação do teor de reforço ótimo Cement-based composite reinforced with bamboo pulp. Part I: Determination of optimum reinforcement percentage

Directory of Open Access Journals (Sweden)

Marcos A. S. dos Anjos

2003-08-01

Full Text Available Este trabalho apresenta os resultados experimentais de um estudo em que se procurou desenvolver compósitos de matriz cimentícia reforçada com polpa de bambu. Foram usados dois tipos de polpa: refinada e sem refino. Fez-se variar o teor de fibras de 0 a 16% em massa de cimento e se desenvolveu um processo com sucção, moldagem e prensagem para fabricação dos compósitos. As relações constitutivas dos compósitos foram definidas através de ensaio a compressão e tração de corpos-de-prova cilíndricos de 5x10 cm e do ensaio de flexão em três pontos. A partir delas, foi obtida a capacidade de absorção de energia. Determinaram-se, também, algumas propriedades físicas, como absorção, porosidade aparente, densidade seca e úmida dos compósitos. Os resultados mostraram melhor performance dos compósitos com fibras refinadas em relação àquelas com fibras sem refino e também indicaram que o teor ótimo de fibras refinadas se situou em torno de 8%, quando promoveram notáveis melhoramentos das propriedades mecânicas dos compósitos em relação à matriz plena.This work presents the experimental results of a study which intended to develop a composite with cementations matrix reinforced with bamboo pulp. Two types of pulps were used: refined and unrefined pulps. The fibre content varied between 0 and 16% cement (weight basis. After the preparation of fresh composite mix the experimental specimens were prepared applying a specially developed process based on Hastshek method using suction then moulding and pressing. The compression, tension and the flexural behavior and their constitutive relations were established using 5 cm diameter by 10 cm high cylindrical specimens and three point bending tests at respectively. The energy absorbing capacity of the new composites was also established. Physical properties such as water absorption, apparent porosity, dry and humid density were also obtained. The results showed a better performance

The Genome 10K Project: a way forward.

Science.gov (United States)

Koepfli, Klaus-Peter; Paten, Benedict; O'Brien, Stephen J

2015-01-01

The Genome 10K Project was established in 2009 by a consortium of biologists and genome scientists determined to facilitate the sequencing and analysis of the complete genomes of 10,000 vertebrate species. Since then the number of selected and initiated species has risen from ∼26 to 277 sequenced or ongoing with funding, an approximately tenfold increase in five years. Here we summarize the advances and commitments that have occurred by mid-2014 and outline the achievements and present challenges of reaching the 10,000-species goal. We summarize the status of known vertebrate genome projects, recommend standards for pronouncing a genome as sequenced or completed, and provide our present and future vision of the landscape of Genome 10K. The endeavor is ambitious, bold, expensive, and uncertain, but together the Genome 10K Consortium of Scientists and the worldwide genomics community are moving toward their goal of delivering to the coming generation the gift of genome empowerment for many vertebrate species.

Project W-320 acceptance test report for AY-farm electrical distribution

International Nuclear Information System (INIS)

Bevins, R.R.

1998-01-01

This Acceptance Test Procedure (ATP) has been prepared to demonstrate that the AY-Farm Electrical Distribution System functions as required by the design criteria. This test is divided into three parts to support the planned construction schedule; Section 8 tests Mini-Power Pane AY102-PPI and the EES; Section 9 tests the SSS support systems; Section 10 tests the SSS and the Multi-Pak Group Control Panel. This test does not include the operation of end-use components (loads) supplied from the distribution system. Tests of the end-use components (loads) will be performed by other W-320 ATPs

Effects of Dicto-Comp and Dictation on the Writing Skill of Female Adult Iranian EFL Learners

Science.gov (United States)

Adel, Rahil; Hashemian, Mahmood

2015-01-01

This study was an attempt to clarify and remind L2 learners/teachers of 2 kinds of writing: dicto-comp and dictation. We explored the effect of controlled writing on the accuracy of the writing of adult Iranian EFL learners. Prior to the study, the homogeneity of 30 adult EFL learners was checked through an OPT test. Thirty participants were…

Borehole data package for the 216-S-10 pond and ditch well 299-W26-13

International Nuclear Information System (INIS)

Horton, D.G.; Williams, B.A.; Cearlock, C.S.

2000-01-01

One new Resource Conservation and Recovery Act (RCRA) groundwater monitoring well was installed at the 216-S-10 pond and ditch during November and December 1999 in fulfillment of Tri-Party Agreement (Ecology 1996) milestone M-24-42. The well is 299-W26-13 and is located at the northeast comer to the 216-S-10 pond, southwest of 200 West Area. The well is a new downgradient well in the monitoring network. A figure shows the locations of all wells in the 216-S-10 pond and ditch monitoring network. The new well was constructed to the specifications and requirements described in Washington Administrative Code (WAC) 173-160 and WAC 173-303, the groundwater monitoring plan for the 216-S-10 pond and ditch (Airhart et al. 1990), and the description of work for well drilling and installation. During drilling and construction of well 299-W26-13, sampling and analysis activities were done to support remedial action, closure decisions at treatment, storage and disposal facilities, and to confirm preliminary site conceptual models developed in the 200-CS-1 Work Plan (DOE/RL 1999). This document compiles information on the drilling and construction, well development, pump installation, and sediment and groundwater testing applicable to well 299-W26-13. Appendix A contains the Well Summary Sheet (as-built diagram), the Well Construction Summary Report, and the geologist's log. Appendix B contains results of field and laboratory determinations of physical and chemical properties of sediment samples. Appendix C contains borehole geophysical logs. Additional documentation concerning well construction is on file with Bechtel Hanford, Inc., Richland, Washington

1?10 kW Stationary Combined Heat and Power Systems Status and Technical Potential: Independent Review

Energy Technology Data Exchange (ETDEWEB)

Maru, H. C.; Singhal, S. C.; Stone, C.; Wheeler, D.

2010-11-01

This independent review examines the status and technical potential of 1-10 kW stationary combined heat and power fuel cell systems and analyzes the achievability of the DOE cost, efficiency, and durability targets for 2012, 2015, and 2020.

Comparação do comportamento à flexão com restrições à deflexão de placas de compósitos de matriz polimérica epoxídica em função do tipo de fibra de reforço

Directory of Open Access Journals (Sweden)

Morais Willy A. de

2003-01-01

Full Text Available Placas finas de compósitos de matriz polimérica epoxídica reforçada por fibras de vidro, carbono ou aramida, bem como placas de um compósito híbrido vidro-aramida, foram submetidas a ensaios de flexão. As condições de fixação dos corpos de prova foram tais que o ensaios foram realizados com deflexão restrita. Os resultados experimentais obtidos para a deflexão máxima dos compósitos puderam ser qualitativamente previstos usando-se o método de balanço de energia de Ritz. Os compósitos reforçados por fibras de carbono apresentaram os maiores valores de energia de iniciação e de força máxima, o que foi atribuído às altas propriedades intrínsecas das fibras. As propriedades específicas do compósito híbrido foram superiores às dos compósitos apenas com fibras de vidro ou fibras aramidas. Este efeito sinergístico indicou um projeto adequado na fabricação deste compósito. O modo de falha macroscópico de todos os compósitos foi semelhante. Na face frontal, a interação compósito - punção seguiu o comportamento previsto pela Lei de Hertz. Na face posterior, houve preferencialmente delaminação.

CompNanoTox2015: novel perspectives from a European conference on computational nanotoxicology on predictive nanotoxicology

Energy Technology Data Exchange (ETDEWEB)

Bañares, Miguel A. [Instituto de Catalisis y Petroleoquimica, ICP, CSIC, Madrid, Spain,; Haase, Andrea [German Federal Institute for Risk Assessment (BfR), Department of Chemical and Product Safety, Berlin, Germany,; Tran, Lang [Statistics and Toxicology Section, Institute of Occupational Medicine, Edinburgh, UK,; Lobaskin, Vladimir [School of Physics, University College Dublin, Dublin, Ireland,; Oberdörster, Günter [Department of Environmental Medicine, University of Rochester, Rochester, NY, USA,; Rallo, Robert [Departament d’Enginyeria Informatica i Matematiques, Universitat Rovira i Virgili, Tarragona, Spain,; Advanced Computing, Mathematics, and Data Division, Pacific Northwest National Laboratory, Richland, WA, USA,; Leszczynski, Jerzy [Interdisciplinary Nanotoxicity Center, Jackson State University, Jackson, MS, USA,; Hoet, Peter [Public Health, Unit Lung Toxicology, K. U. Leuven, Leuven, Belgium,; Korenstein, Rafi [Faculty of Medicine, Tel-Aviv University, Tel Aviv, Israel,; Hardy, Barry [Technology Park Basel, Douglas Connect GmbH, Basel, Switzerland,; Puzyn, Tomasz [Laboratory of Environmental Chemometrics, Faculty of Chemistry, University of Gdansk, Gdansk, Poland

2017-08-09

A first European Conference on Computational Nanotoxicology, CompNanoTox, was held in November 2015 in Benahavís, Spain with the objectives to disseminate and integrate results from the European modeling and database projects (NanoPUZZLES, ModENPTox, PreNanoTox, MembraneNanoPart, MODERN, eNanoMapper and EU COST TD1204 MODENA) as well as to create synergies within the European NanoSafety Cluster. This conference was supported by the COST Action TD1204 MODENA on developing computational methods for toxicological risk assessment of engineered nanoparticles and provided a unique opportunity for crossfertilization among complementary disciplines. The efforts to develop and validate computational models crucially depend on high quality experimental data and relevant assays which will be the basis to identify relevant descriptors. The ambitious overarching goal of this conference was to promote predictive nanotoxicology, which can only be achieved by a close collaboration between the computational scientists (e.g. database experts, modeling experts for structure, (eco) toxicological effects, performance and interaction of nanomaterials) and experimentalists from different areas (in particular toxicologists, biologists, chemists and material scientists, among others). The main outcome and new perspectives of this conference are summarized here.

Project Development Specification for Special Protective Coating

International Nuclear Information System (INIS)

MCGREW, D.L.

2000-01-01

Establishes the performance, design development, and test requirements for the Special Protective Coating. The system engineering approach was used to develop this document in accordance with the guidelines laid out in the Systems Engineering Management Plan for Project W-314

Project Development Specification for Valve Pit Manifold

International Nuclear Information System (INIS)

MCGREW, D.L.

2000-01-01

Establishes the performance, design development, and test requirements for the valve pit manifolds. The system engineering approach was used to develop this document in accordance with the guidelines laid out in the Systems Engineering Management Plan for Project W-314

Physical state of implanted W in copper

International Nuclear Information System (INIS)

Borders, J.A.; Cullis, A.G.; Poate, J.M.

1975-01-01

Transmission electron microscopy and 4 He ion channeling measurements were combined to investigate the physical state of implanted W in copper. For 60 0 K implantations of 2 x 10 15 W cm -2 , W is found to be 100 percent substitutional and is still 90 percent substitutional for a dose of 10 16 W cm -2 . Implantation of 10 17 W cm -2 produces a thin disordered surface layer of W and Cu with the W occupying no regular lattice site. On annealing to 600 0 C, W precipitates are formed with dimensions of a few hundred A and certain preferred orientations in the Cu lattice. (auth)

34 CFR 271.10 - What types of projects may be funded?

Science.gov (United States)

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false What types of projects may be funded? 271.10 Section... Activities Does the Secretary Assist Under This Program? § 271.10 What types of projects may be funded? The Secretary awards grants to SEAs for projects offering technical assistance (including training) to school...

Preparation of W/CuCrZr monoblock test mock-up using vacuum brazing technique

International Nuclear Information System (INIS)

Singh, Kongkham Premjit; Khirwadkar, Samir S.; Bhope, Kedar; Patel, Nikunj; Mokaria, Prakash K.; Mehta, Mayur

2015-01-01

Development of the joining for W/CuCrZr monoblock PFC test mock-up is an interest area in Fusion R and D. W/Cu bimetallic material has prepared using OFHC copper casting approach on the radial surface of W monoblock tile surface. The W/Cu bimetallic material has been joined with CuCrZr tube (heat sink) material with the vacuum brazing route. Vacuum brazing of W/Cu-CuCrZr has been performed @ 970 °C for 10 mins using NiCuMn-37 filler material under deep vacuum environment (10 -6 mbar). Graphite fixtures were used for OFHC copper casting and vacuum brazing experiments. The joint integrity of W/Cu-CuCrZr monoblock mock-up on W/Cu and Cu-CuCrZr has been checked using ultrasonic immersion technique. Micro-structural examination and Spot-wise elemental analysis have been carried out using HR-SEM and EDAX. The results of the experimental work will be discussed in the paper. (author)

Project W-314 specific test and evaluation plan for SN-635 transfer line (241-AY-01A to 241-AY-02A) and SN-633 transfer line tie in

International Nuclear Information System (INIS)

Hays, W.H.

1998-01-01

This Specific Test and Evaluation Plan (STEP) defines the test and evaluation activities encompassing the installation of the SN-635 transfer line for the W-314 Project. The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made by the addition of the SN-635 transfer line and the tie in of SN-633 to the AY-02A pit by the W-314 Project. The STEP develops the outline for test procedures that verify the system's performance to the established Project design criteria. The STEP is a lower tier document based on the W-314 Test and Evaluation Plan (TEP)

Study of W boson polarisations and Triple Gauge boson Couplings in the reaction $e^{+}e^{-} \\to W^{+}W^{-}$ at LEP 2

CERN Document Server

Abdallah, J.; Adam, W.; Adzic, P.; Albrecht, T.; Alemany-Fernandez, R.; Allmendinger, T.; Allport, P.P.; Amaldi, U.; Amapane, N.; Amato, Sandra F.; Anashkin, E.; Andreazza, A.; Andringa, Sofia; Anjos, N.; Antilogus, Pierre; Apel, W-D.; Arnoud, Y.; Ask, S.; Asman, B.; Augustin, Jean-Eudes; Augustinus, A.; Baillon, P.; Ballestrero, A.; Bambade, P.; Barbier, R.; Bardin, D.; Barker, G.J.; Baroncelli, Antonio; Battaglia, Marco; Baubillier, M.; Becks, K-H.; Begalli, M.; Behrmann, A.; Ben-Haim, Eli; Benekos, N.; Benvenuti, A.; Berat, C.; Berggren, Mikael; Bertrand, D.; Besancon, Marc; Besson, N.; Bloch, Daniel; Blom, M.; Bluj, Michal; Bonesini, Maurizio; Boonekamp, M.; Booth, P.S.L.; Borisov, G.; Botner, Olga; Bouquet, B.; Bowcock, T.J.V.; Boyko, I.; Bracko, Marko; Brenner, R.; Brodet, E.; Bruckman, P.; Brunet, J.M.; Buschbeck, B.; Buschmann, P.; Calvi, M.; Camporesi, Tiziano; Canale, V.; Carena, F.; Castro, Nuno Filipe; Cavallo, F.; Chapkin, M.; Charpentier, Ph.; Checchia, Paolo; Chierici, R.; Chliapnikov, P.; Chudoba, J.; Chung, Suh-Urk; Cieslik, K.; Collins, P.; Contri, Roberto; Cosme, G.; Cossutti, Fabio; Costa, M.J.; Crennell, D.; Cuevas, Javier; D'Hondt, J.; da Silva, T.; Da Silva, W.; Della Ricca, Giuseppe; De Angelis, Alessandro; De Boer, W.; De Clercq, C.; De Lotto, Barbara; De Maria, N.; De Min, A.; de Paula, L.; Di Ciaccio, L.; Di Simone, A.; Doroba, K.; Eigen, G.; Ekelof, Tord; Ellert, Mattias; Elsing, M.; Espirito Santo, Maria Catarina; Fanourakis, George K.; Feindt, Michael; Fernandez, J.; Ferrer, Antonio; Ferro, F.; Flagmeyer, U.; Foeth, H.; Fokitis, E.; Fulda-Quenzer, F.; Fuster, J.; Gandelman, Miriam; Garcia, C.; Gavillet, Philippe; Gazis, Evangelos; Gomez-Ceballos, G.; Goncalves, P.; Graziani, E.; Grosdidier, G.; Grzelak, K.; Guy, J.; Haag, C.; Hallgren, A.; Hamacher, Klaus; Hamilton, K.; Haug, S.; Hauler, F.; Hedberg, Vincent; Hennecke, M.; Herr, H.; Hoffman, J.; Holmgren, S-O.; Holt, P.J.; Houlden, M.A.; Jackson, John Neil; Jarlskog, Goran; Jarry, P.; Jeans, D.; Johansson, E.K.; Jonsson, P.; Joram, C.; Jungermann, L.; Kapusta, Frederic; Katsanevas, S.; Katsoufis, E.; Kernel, Gabrijel; Kerzel, U.; King, B.T.; Kjaer, N.J.; Kluit, Peter; Kokkinias, P.; Kourkoumelis, C.; Kouznetsov, O.; Krumstein, Z.; Kucharczyk, M.; Lamsa, J.; Leder, G.; Ledroit, F.; Leinonen, L.; Leitner, R.; Lemonne, Jacques; Lepeltier, V.; Lesiak, T.; Liebig, W.; Liko, D.; Lipniacka, A.; Lopes, J.H.; Lopez, J.M.; Loukas, D.; Lutz, Pierre; Lyons, Louis; MacNaughton, J.; Malek, A.; Maltezos, S.; Mandl, F.; Marco, J.; Marco, R.; Marechal, B.; Margoni, M.; Marin, J-C.; Mariotti, C.; Markou, A.; Martinez-Rivero, C.; Masik, J.; Mastroyiannopoulos, N.; Matorras, F.; Matteuzzi, C.; Mazzucato, F.; Mazzucato, M.; Nulty, R.Mc; Meroni, C.; Migliore, E.; Mitaroff, W.; Mjoernmark, U.; Moa, T.; Moch, M.; Monge, R.; Montenegro, J.; Moraes, D.; Moreno, S.; Morettini, P.; Muller, Ulrich; Muenich, K.; Mulders, M.; Mundim Filho, Luiz Martins; Murray, W.; Muryn, B.; Myatt, G.; Myklebust, T.; Nassiakou, M.; Navarria, F.; Nawrocki, K.; Nicolaidou, R.; Oblakowska-Mucha, A.; Obraztsov, V.; Olshevski, A.; Onofre, A.; Orava, R.; Osterberg, K.; Ouraou, A.; Oyanguren, A.; Paganoni, M.; Paiano, S.; Palacios, J.P.; Palka, Henryk; Papadopoulou, Th.D.; Pape, L.; Parkes, C.; Parodi, F.; Parzefall, U.; Passeri, A.; Passon, O.; Peralta, L.; Perepelitsa, V.; Perrotta, Andrea; Petrolini, Alessandro; Piedra, Jonatan; Pieri, L.; Pierre, Francois; Pimenta, M.; Piotto, E.; Poireau, V.; Pol, M.E.; Polok, G.; Pozdniakov, V.; Pukhaeva, N.; Pullia, A.; Radojicic, D.; Rames, J.; Read, A.; Rebecchi, P.; Rehn, J.; Reid, D.; Reinhardt, R.; Renton, Peter; Richard, F.; Ridky, Jan; Rivero, M.; Rodriguez, D.; Romero, A.; Ronchese, Paolo; Roudeau, P.; Rovelli, T.; Ruhlmann, Vanina; Ryabtchikov, D.; Sadovsky, A.; Salmi, L.; Salt, J.; Sander, C.; Savoy-Navarro, A.; Schwickerath, U.; Segar, A.; Sekulin, R.; Siebel, Martin; Sisakian, A.; Smadja, G.; Smirnova, O.; Sokolov, Andrei Valerevich; Sopczak, A.; Sosnowski, R.; Spassov, T.; Stanitzki, M.; Stocchi, A.; Strauss, J.; Stugu, B.; Szczekowski, M.; Szeptycka, M.; Szumlak, T.; Tabarelli de Fatis, T.; Taffard, A.C.; Tegenfeldt, F.; Timmermans, Jan; Tkatchev, L.; Tobin, M.; Todorovova, S.; Tome, B.; Tonazzo, A.; Tortosa, P.; Travnicek, Petr; Treille, D.; Tristram, G.; Trochimczuk, M.; Troncon, Clara; Turluer, M-L.; Tyapkin, I.A.; Tyapkin, P.; Tzamarias, S.; Uvarov, V.; Valenti, Giovanni; Van Dam, P.; Van Eldik, J.; Van Lysebetten, A.; van Remortel, N.; Van Vulpen, I.; Vegni, G.; Veloso, Filipe; Venus, W.; Verdier, Patrice; Verzi, V.; Vilanova, D.; Vitale, Lorenzo; Vrba, V.; Wahlen, H.; Washbrook, A.J.; Weiser, C.; Wicke, D.; Wickens, J.; Wilkinson, G.; Winter, M.; Witek, M.; Yushchenko, O.; Zalewska, A.; Zalewski, P.; Zavrtanik, Danilo; Zhuravlov, V.; Zimine, N.I.; Zintchenko, Alexandre

2008-01-01

A determination of the single W Spin Density Matrix (SDM) elements in the reaction e+e- -> W+W- -> l nu q qbar (l=e/mu) is reported at centre-of-mass energies between 189 and 209 GeV. The data sample used corresponds to an integrated luminosity of 520 pb^{-1} taken by DELPHI between 1998 and 2000. The single W SDM elements, rho_{tau tau'}^{W+-} (tau,tau' = +/-1 or 0), are determined as a function of the W- production angle with respect to the e- beam direction and are obtained from measurements of the W decay products by the application of suitable projection operators, Lambda_{tau tau'}, which assume the V-A coupling of the W boson to fermions. The measured SDM elements are used to obtain the fraction of longitudinally polarised Ws, with the result: sigma_L/sigma_tot = 24.9 +/- 4.5(stat) +/- 2.2(syst) % at a mean energy of 198 GeV. The SDM elements are also used to determine the Triple Gauge Couplings Delta g_1^Z, Delta kappa_gamma, lambda_gamma and g_4^Z, ~kappa_Z and ~lambda_Z. For the CP-violating couplin...

Compósito para fabricação de implantes reabsorvíveis para osteossíntese: avaliação da biocompatibilidade em coelhos Composite for the fabrication of resorbable implants for osteosynthesis: biocompatibility evaluation in rabbits

Directory of Open Access Journals (Sweden)

Emily Correna Carlo

2009-02-01

Full Text Available A biocompatibilidade, a osseointegração e a reabsorção de compósitos contendo 10% de hidroxiapatita (HAP-91® e 90% de polihidroxibutirato foram analisadas após implantação em defeitos ósseos em coelhos. Foram obtidos dados clínicos, radiográficos, histológicos e histomorfométricos aos oito, 45 e 90 dias após a realização da cirurgia, sendo os resultados comparados aos de defeitos não-preenchidos. Não foram observadas diferenças significativas entre os grupos para os parâmetros clínicos avaliados. Radiografias demonstraram o compósito em contato direto com osso aos 45 e 90 dias. Tecido ósseo se formou normalmente no defeito e na interface com o material, quando comparado ao controle. Não foi observado infiltrado inflamatório. Em todos os dias, a porcentagem de tecido ósseo foi maior que a de tecido conjuntivo (P=0,001 aos 8 e 45 dias e 0,022 aos 90 dias dentro dos defeitos. Foram observados tecidos ósseo e conjuntivo na interface com o compósito, sendo o último significativamente maior que o primeiro aos 90 dias (P=0,004. Foram observados sinais de reabsorção do compósito: células gigantes na superfície de fragmentos do compósito separados do bloco original. Portanto, pode-se concluir que o compósito é biocompatível em coelhos, reabsorvível e se integra ao tecido ósseo.Biocompatibility, osseointegration, and resorption of a 10% hydroxyapatite (HAP-91® - 90% polyhydroxybutyrate composite were analyzed after implantation in rabbits´ bone defects. Clinical, radiographic, histologic and histomorphometric data were collected on the 8th, 45th, and 90th days after surgery and the results were compared to those of unfilled defects. No significant differences between groups for the evaluated clinical parameters existed. Radiographs showed bone-composite direct contact. Bone tissue was formed normally in the defect and at the composite-tissue interface when compared to the control. No inflammatory infiltrated was

34 CFR 272.10 - What types of projects may be funded?

Science.gov (United States)

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false What types of projects may be funded? 272.10 Section... Activities Does the Secretary Fund Under This Program? § 272.10 What types of projects may be funded? (a) The Secretary may award funds to DACs for projects offering technical assistance (including training) to school...

A project management approach to an ACPE accreditation self-study.

Science.gov (United States)

Dominelli, Angela; Iwanowicz, Susan L; Bailie, George R; Clarke, David W; McGraw, Patrick S

2007-04-15

In preparation for an on-site evaluation and accreditation by the American Council on Pharmaceutical Education (ACPE), the Albany College of Pharmacy employed project management techniques to complete a comprehensive self-study. A project lifecycle approach, including planning, production, and turnover phases, was used by the project's Self-Study Steering Committee. This approach, with minimal disruption to college operations, resulted in the completion of the self-study process on schedule. Throughout the project, the Steering Committee maintained a log of functions that either were executed successfully or in hindsight, could have been improved. To assess the effectiveness of the project management approach to the the self-study process, feedback was obtained from the College community through a poststudy survey. This feedback, coupled with the Steering Committee's data on possible improvements, form the basis for the lessons learned during this self-study process.

Development of electrical efficiency measurement techniques for 10 kW-class SOFC system: Part II. Uncertainty estimation

International Nuclear Information System (INIS)

Tanaka, Yohei; Momma, Akihiko; Kato, Ken; Negishi, Akira; Takano, Kiyonami; Nozaki, Ken; Kato, Tohru

2009-01-01

Uncertainty of electrical efficiency measurement was investigated for a 10 kW-class SOFC system using town gas. Uncertainty of heating value measured by the gas chromatography method on a mole base was estimated as ±0.12% at 95% level of confidence. Micro-gas chromatography with/without CH 4 quantification may be able to reduce uncertainty of measurement. Calibration and uncertainty estimation methods are proposed for flow-rate measurement of town gas with thermal mass-flow meters or controllers. By adequate calibrations for flowmeters, flow rate of town gas or natural gas at 35 standard litters per minute can be measured within relative uncertainty ±1.0% at 95 % level of confidence. Uncertainty of power measurement can be as low as ±0.14% when a precise wattmeter is used and calibrated properly. It is clarified that electrical efficiency for non-pressurized 10 kW-class SOFC systems can be measured within ±1.0% relative uncertainty at 95% level of confidence with the developed techniques when the SOFC systems are operated relatively stably

Experimental determination of the transient heat absorption of W divertor materials

International Nuclear Information System (INIS)

Greuner, H; Böswirth, B; Eich, T; Herrmann, A; Maier, H; Sieglin, B

2014-01-01

Fast infrared (IR) thermography resolves the transient edge localized mode (ELM) induced heat fluxes on divertor components on time scales of a few hundred microseconds. These heat loads range from 10 to several 100 MW m −2 and energy densities of 15–200 kJ m −2 . The calculation of the local ELM heat flux depends on the so-called surface heat transfer coefficient very sensitively. Therefore we performed dedicated experiments in the high heat flux test facility GLADIS with well-defined temporal and spatial shape of heat fluxes to reduce the uncertainties of the ELM heat flux calculations in JET. We have experimentally determined the surface heat transfer coefficient for the W components used as divertor components of the JET ILW project. Based on the results of the measured transient heat absorption, the coefficient was deduced in a temperature range from 400 to 1200 °C for the bulk W lamella and for 10 and 20 μm W-coated carbon fibre reinforced carbon tiles, respectively. The measurements allow an improved estimation of ELM heat loads in JET on W and W-coated tiles and an error estimate of the absorbed heat flux. (paper)

Signatures of Parton Exogamy in $e^+ e^- \\to W^+ W^- \\to$ hadrons

CERN Document Server

Ellis, Jonathan Richard; Ellis, John; Geiger, Klaus

1997-01-01

We propose possible signatures of `exogamous' combinations between partons in the different W+ and W- hadron showers in e+e- -> W+W- events with purely hadronic final states. Within the space-time model for hadronic shower development that we have proposed previously, we find a possible difference of about 10 % between the mean hadronic multiplicity in such purely hadronic final states and twice the hadronic multiplicity in events in which one W decays hadronically and the other leptonically, i.e., \

Compósitos de HDPE com resíduos de fibras têxteis. Parte I: caracterização mecânica HDPE composites with textile fibers waste. Part I: mechanical characterization

Directory of Open Access Journals (Sweden)

Maira Finkler

2005-07-01

Full Text Available Neste trabalho são apresentados e discutidos os resultados das propriedades mecânicas de novos materiais compósitos preparados com resíduos de fibras têxteis poliméricas e de polímeros commodities. As fibras naturais oferecem vantagens sobre as sintéticas, em termos de propriedades mecânicas e térmicas. Os compósitos foram preparados a partir da mistura de polietileno de alta densidade (HDPE e resíduos de fibras têxteis (50% algodão /50% acrílico em teores crescentes de 10 a 40%, em um misturador de alta velocidade, utilizando Surlyn 2601, Polybond 3009 e Polybond 1009 como agentes compatibilizantes. Corpos-de-prova para ensaios de tração, flexão e impacto foram produzidos a partir de chapas obtidas em uma prensa hidráulica. Os compósitos que utilizaram agentes compatibilizantes apresentaram os melhores resultados de resistência à tração e à flexão, principalmente com 5% do agente Polybond 3009 e 20 a 40% de resíduos de fibras têxteis.In this work, results of mechanical properties of new composites based on textile fiber residues from clothing industry and commodity polymers are discussed. Natural fibers offer some advantages over synthetic ones, regarding mechanical and thermal properties. The composites were produced by mixing high density polyethylene with the textile fibers (50% cotton /50% acrylic in increasing contents, from 10 to 40% in a thermokinetic mixer, using Surlyn 2601, Polybond 3009 and Polybond 1009 as coupling agents. The tensile, flexural and impact samples were produced by cutting sheets obtained in a hydraulic press. The composites with coupling agents showed good results of tensile and flexural strength, mainly with 5% of Polybond 3009 and 20-40% of textile fiber residues.

Effet sur la compétitivité des réglementations relatives à la gestion des effluents

DEFF Research Database (Denmark)

Andersen, Mikael Skou

2004-01-01

Grâce à un regard approfondi sur le secteur laitier dans les pays de l'OCDE, cette étude permet de mieux analyser l'impact des subventions à l'agriculture et des politiques de l'environnement sur l'environnement et sur la compétitivité internationale des produits laitiers. Ce chapitre étudie les ...

Non-Radial Oscillation Modes of Superfluid Neutron Stars Modeled with CompOSE

Directory of Open Access Journals (Sweden)

Prashanth Jaikumar

2018-03-01

Full Text Available We compute the principal non-radial oscillation mode frequencies of Neutron Stars described with a Skyrme-like Equation of State (EoS, taking into account the possibility of neutron and proton superfluidity. Using the CompOSE database and interpolation routines to obtain the needed thermodynamic quantities, we solve the fluid oscillation equations numerically in the background of a fully relativistic star, and identify imprints of the superfluid state. Though these modes cannot be observed with current technology, increased sensitivity of future Gravitational-Wave Observatories could allow us to observe these oscillations and potentially constrain or refine models of dense matter relevant to the interior of neutron stars.

Influência de estabilizantes na degradação foto-oxidativa de filmes de compósitos de SWy-1/poli(óxido de etileno

Directory of Open Access Journals (Sweden)

Patrícia Coelho Lombardo

2015-02-01

Full Text Available Compósitos de poli(óxido de etileno (PEO com argila montmorilonita SWy-1 e estabilizantes (2-hidroxibenzofenona e tinuvin 770 foram preparados pelo método de intercalação em solução. Os filmes obtidos foram expostos a irradiação UV, e os produtos da fotodegradação foram monitorados por FTIR (Fourier Transform Infrared Spectroscopy, ou Espectroscopia no infravermelho por transformada de Fourier e SEC (Size Exclusion Chromatography, ou cromatografia de exclusão por tamanho. O PEO puro apresentou maior coeficiente de degradação, kd, comparado com as demais amostras. O sistema que apresentou o menor valor para o coeficiente de degradação (kd = 1,9×10–6 mol g–1 h-1 foi o compósito de PEO/5%SWy-1 com 0,25% de tinuvin 770. Nesse caso, a estabilização da matriz de PEO pode ser atribuída à argila juntamente com o tinuvin 770. A argila dispersa e absorve a irradiação UV, e o tinuvin age como estabilizante do tipo HALS (do inglês hindered amine light stabilizer, ou estabilizantes à luz tipo aminas impedidas.

Development of a 100 W, single frequency, CW Nd:YAG Laser

International Nuclear Information System (INIS)

Veitch, P.J.; Mudge, D.; Munch, J.; Hamilton, M.W.; Ostermeyer, M.; Hosken, D.; Brooks, A.

2002-01-01

Full text: High power, diode-laser-pumped, continuous wave (cw) solid-state lasers with excellent beam quality, efficiency and reliability are required for demanding applications, including gravitational wave interferometry, where current additional requirements include single frequency, low noise and Nd:YAG. Our approach is a chain of injection locked laser oscillators, theoretically capable of achieving the lowest noise possible. We use a single-frequency (100 mW) master laser to injection lock a medium-power (10 W) laser that in turn injection locks a 100 W laser. Injection locking requires an optimized, single mode, power slave laser at each stage. We shall describe the nearly completed 10 W brass-board laser, which will also be deployed at the ACIGA Test Facility at Gingin. We shall also describe our 100 W laser using a scalable diode pumping scheme, an active control of thermal lensing and a stable-unstable resonator. Initial tests showed mode control to be limited by thermal focusing and thermally induced birefringence in the Nd:YAG medium at 70 W output. Recent efforts have identified the source of the thermal lens and significantly reduced its magnitude, leading to a modified design. We shall present our latest results from the experiments to demonstrate single mode, single frequency laser at 100 W

Physics design of a 10 MeV, 6 kW travelling wave electron linac for ...

Indian Academy of Sciences (India)

2016-10-11

Oct 11, 2016 ... We present the physics design of a 10 MeV, 6 kW S-band (2856 MHz) electron linear ... linac (in contrast with standing wave linac) is that it accepts the RF power over a band of frequencies. Three- ... structures are preferred for relatively higher energy ... klystron in a TW linac, which results in cost reduction.

Collaborative Engagement Approaches For Delivering Sustainable Infrastructure Projects In The AEC Sector

Directory of Open Access Journals (Sweden)

Adetola, Alaba

2011-12-01

Full Text Available The public sector has traditionally financed and operated infrastructure projects using resources from taxes and various levies (e.g. fuel taxes, road user charges. However, the rapid increase in human population growth coupled with extended globalisation complexities and associated social/political/economic challenges have placed new demands on the purveyors and operators of infrastructure projects. The importance of delivering quality infrastructure has been underlined by the United Nations declaration of the Millennium Development Goals; as has the provision of ‘adequate’ basic structures and facilities necessary for the well-being of urban populations in developing countries. Thus, in an effort to finance developing countries’ infrastructure needs, most countries have adopted some form of public-private collaboration strategy. This paper critically reviews these collaborative engagement approaches, identifies and highlights 10 critical themes that need to be appropriately captured and aligned to existing business models in order to successfully deliver sustainable infrastructure projects. Research findings show that infrastructure services can be delivered in many ways, and through various routes. For example, a purely public approach can cause problems such as slow and ineffective decision-making, inefficient organisational and institutional augmentation, and lack of competition and inefficiency (collectively known as government failure. On the other hand, adopting a purely private approach can cause problems such as inequalities in the distribution of infrastructure services (known as market failure. Thus, to overcome both government and market failures, a collaborative approach is advocated which incorporates the strengths of both of these polarised positions.

Comfort Characterization of Various Fabrics for Extremity Protection

Science.gov (United States)

2013-09-01

of Fabric Mechanical Properties on Drape. Textile Research Journal 1998, 68 (1), 57–64 20. Nilakantan, G.; Keefe , M.; Bogetti, T. A.; Gillespie, J. W...10), 1056–1071. 21. Keefe , M.; Wetzel, E. D. Modeling and Simulation of Fabric-Human Interactions. Proceedings of TexComp-11 Conference, Leuven

W. Edwards Deming, quality analysis, and total behavior management

OpenAIRE

Saunders, Richard R.; Saunders, Jay L.

1994-01-01

During the past 10 years, the inclusion of the word “quality” in descriptions of production methods, management approaches, educational systems, service system changes, and so forth, has grown exponentially. It appears that no new approach to any problem is likely to be given much consideration today without overt acknowledgment that some improvement in quality must be the outcome. The origins of the importance of quality are primarily rooted in the awakening recognition of the influence of W...

Temperature-dependent viscosity analysis of SAE 10W-60 engine oil with RheolabQC rotational rheometer

Directory of Open Access Journals (Sweden)

Zahariea Dănuț

2017-01-01

Full Text Available The purpose of this work was to determine a viscositytemperature relationship for SAE 10W-60 engine oil. The rheological properties of this engine oil, for a temperature range of 20÷60 °C, were obtained with RheolabQC rotational rheometer. For the first reference temperature of 40 °C, the experimental result was obtained with a relative error of 1.29%. The temperature-dependent viscosity was modelled, comparatively, with the Arrhenius and the 3rd degree polynomial models. Comparing the graphs of the fits with prediction bounds for 95% confidence level, as well as the goodness-of-fit statistics, the preliminary conclusion was that the 3rd degree polynomial could be the best fit model. However, the fit model should be used also for extrapolation, for the second reference temperature of 100 °C. This new approach changes the fit models order, the Arrhenius equation becoming the best fit model, because of the completely failed to predict the extrapolated value with the polynomial model.

Crystal structure of (OC5W(μ-dppeW(CO5

Directory of Open Access Journals (Sweden)

Hannah F. Drake

2016-10-01

Full Text Available The centrosymmetric title complex, [μ-ethane-1,2-diylbis(diphenylphosphane-κ2P:P′]bis[pentacarbonyltungsten(0], [W2(C26H24P2(CO10], consists of two W(CO5 moieties bridged by a bis(diphenylphosphanylethane (dppe ligand. The W0 atom has a slightly distorted octahedral coordination environment consisting of 5 carbonyl ligands and one P atom from the bridging dppe ligand with the nearest W0 atom 5.625 (5 Å away. The complex resides on a center of symmetry.

Usinabilidade de materiais compósitos poliméricos para aplicações automotivas

Directory of Open Access Journals (Sweden)

Juan Carlos Horta Gutiérrez

2014-12-01

Full Text Available A cada dia o avanço tecnológico nos leva a encruzilhadas como a construção de veículos mais leves, com menor consumo de combustível e mais seguros. Neste sentido, materiais compósitos poliméricos são materiais usados atualmente em diferentes aplicações nas quais a leveza combinada com um alto módulo de elasticidade são características importantes. Poliamidas reforçadas com fibras de vidro se apresentam como materiais de grande futuro em aplicações automotivas. Desta forma, torna-se importante o estudo do comportamento deste tipo de material quando submetidos a processos de usinagem. Dentre os processos de usinagem o processo de furação é um dos mais utilizados nos componentes de material compósito. Neste trabalho será analisada a influência do avanço, da velocidade de corte e da geometria da ferramenta na força de avanço, pressão específica de corte e desvios dimensionais do furo realizado. Os testes foram realizados em poliamida sem reforço (PA6 e reforçada com 30% fibra de vidro (PA66-GF30 utilizando brocas de carbonetos sinterizados (K20 com ângulos de ponta diferente. Os resultados apontam claramente para a melhor usinabilidade do material reforçado em comparação ao sem reforço.

Cloning and Expression of Plantaricin W Produced by Lactobacillus plantarum U10 Isolate from "Tempoyak" Indonesian Fermented Food as Immunity Protein in Lactococcus lactis.

Science.gov (United States)

Lages, Aksar Chair; Mustopa, Apon Zaenal; Sukmarini, Linda; Suharsono

2015-10-01

Plantaricins, one of bacteriocin produced by Lactobacillus plantarum, are already known to have activities against several pathogenic bacterium. L. plantarum U10 isolated from "tempoyak," an Indonesian fermented food, produced one kind of plantaricin designated as plantaricin W (plnW). The plnW is suggested as a putative membrane location of protein and has similar conserved motif which is important as immunity to bacteriocin itself. Thus, due to study about this plantaricin, several constructs have been cloned and protein was analyzed in Lactococcus lactis. In this study, plnW gene was successfully cloned into vector NICE system pNZ8148 and created the transformant named L. lactis NZ3900 pNZ8148-WU10. PlnW protein was 25.3 kDa in size. The concentration of expressed protein was significantly increased by 10 ng/mL nisin induction. Furthermore, PlnW exhibited protease activity with value of 2.22 ± 0.05 U/mL and specific activity about 1.65 ± 0.03 U/mg protein with 50 ng/mL nisin induction. Immunity study showed that the PlnW had immunity activity especially against plantaricin and rendered L. lactis recombinant an immunity broadly to other bacteriocins such as pediocin, fermentcin, and acidocin.

THE COMPACT, TIME-VARIABLE RADIO SOURCE PROJECTED INSIDE W3(OH): EVIDENCE FOR A PHOTOEVAPORATED DISK?

International Nuclear Information System (INIS)

Dzib, Sergio A.; Rodríguez-Garza, Carolina B.; Rodríguez, Luis F.; Kurtz, Stan E.; Loinard, Laurent; Zapata, Luis A.; Lizano, Susana

2013-01-01

We present new Karl G. Jansky Very Large Array (VLA) observations of the compact (∼0.''05), time-variable radio source projected near the center of the ultracompact H II region W3(OH). The analysis of our new data as well as of VLA archival observations confirms the variability of the source on timescales of years and for a given epoch indicates a spectral index of α = 1.3 ± 0.3 (S ν ∝ν α ). This spectral index and the brightness temperature of the source (∼6500 K) suggest that we are most likely detecting partially optically thick free-free radiation. The radio source is probably associated with the ionizing star of W3(OH), but an interpretation in terms of an ionized stellar wind fails because the detected flux densities are orders of magnitude larger than expected. We discuss several scenarios and tentatively propose that the radio emission could arise in a static ionized atmosphere around a fossil photoevaporated disk

NextGEOSS project: A user-driven approach to build a Earth Observations Data Hub

Science.gov (United States)

Percivall, G.; Voidrot, M. F.; Bye, B. L.; De Lathouwer, B.; Catarino, N.; Concalves, P.; Kraft, C.; Grosso, N.; Meyer-Arnek, J.; Mueller, A.; Goor, E.

2017-12-01

Several initiatives and projects contribute to support Group on Earth Observation's (GEO) global priorities including support to the UN 2030 Agenda for sustainable development, the Paris Agreement on climate change, and the Sendai Framework for Disaster Risk Reduction . Running until 2020, the NextGEOSS project evolves the European vision of a user driven GEOSS data exploitation for innovation and business, relying on the three main pillars: engaging communities of practice delivering technological advancements advocating the use of GEOSS These 3 pillars support the creation and deployment of Earth observation based innovative research activities and commercial services. In this presentation we will emphasise how the NextGEOSS project uses a pilot-driven approach to ramp up and consolidate the system in a pragmatique way, integrating the complexity of the existing global ecosystem, leveraging previous investments, adding new cloud technologies and resources and engaging the diverse communities to address all types of Sustainable Development Goals (SDGs). A set of 10 initial pilots have been defined by the project partners to address the main challenges and include as soon as possible contributions to SDGs associated with Food Sustainability, Bio Diversity, Space and Security, Cold Regions, Air Pollutions, Disaster Risk Reduction, Territorial Planning, Energy. In 2018 and 2019 the project team will work on two new series of Architecture Implementation Pilots (AIP-10 and AIP-11), opened world-wide, to increase discoverability, accessibility and usability of data with a strong User Centric approach for innovative GEOSS powered applications for multiple societal areas. All initiatives with an interest in and need of Earth observations (data, processes, models, ...) are welcome to participate to these pilots initiatives. NextGEOSS is a H2020 Research and Development Project from the European Community under grant agreement 730329.

Project W-211 Initial Tank Retrieval Systems (ITRS) Description of Operations for 241-AZ-102

Energy Technology Data Exchange (ETDEWEB)

BRIGGS, S.R.

2000-02-25

The primary purpose of the Initial Tank Retrieval Systems (ITRS) is to provide systems for retrieval of radioactive wastes stored in underground double-shell tanks (DSTs) for transfer to alternate storage, evaporation, pretreatment or treatment, while concurrently reducing risks associated with safety watch list and other DSTs. This Description of Operation (DOO) defines the control philosophy for the waste retrieval system for Tank 241-AZ-102 (AZ-102). This DOO provides a basis for the detailed design of the Project W-211 Retrieval Control System (RCS) for AZ-102 and also establishes test criteria for the RCS.

Project W-211 Initial Tank Retrieval Systems (ITRS) Description of Operations for 241-AZ-102

International Nuclear Information System (INIS)

BRIGGS, S.R.

2000-01-01

The primary purpose of the Initial Tank Retrieval Systems (ITRS) is to provide systems for retrieval of radioactive wastes stored in underground double-shell tanks (DSTs) for transfer to alternate storage, evaporation, pretreatment or treatment, while concurrently reducing risks associated with safety watch list and other DSTs. This Description of Operation (DOO) defines the control philosophy for the waste retrieval system for Tank 241-AZ-102 (AZ-102). This DOO provides a basis for the detailed design of the Project W-211 Retrieval Control System (RCS) for AZ-102 and also establishes test criteria for the RCS

A contingency table approach to nonparametric testing

CERN Document Server

Rayner, JCW

2000-01-01

Most texts on nonparametric techniques concentrate on location and linear-linear (correlation) tests, with less emphasis on dispersion effects and linear-quadratic tests. Tests for higher moment effects are virtually ignored. Using a fresh approach, A Contingency Table Approach to Nonparametric Testing unifies and extends the popular, standard tests by linking them to tests based on models for data that can be presented in contingency tables.This approach unifies popular nonparametric statistical inference and makes the traditional, most commonly performed nonparametric analyses much more comp

Dicósimo, Daniel y Simonassi, Silvia (comp., Trabajadores y empresarios en la Argentina del siglo XX: indagaciones desde la historia social

Directory of Open Access Journals (Sweden)

Valeria Ianni

2013-01-01

Full Text Available Dicósimo, Daniel y Simonassi, Silvia (comp., Trabajadores y empresarios en la Argentina del siglo XX: indagaciones desde la historia social, Prohistoria ediciones, Rosario, 2011 (194 págs..

The Lax operator approach for the Virasoro and the W-constraints in the generalized KdV hierarchy

International Nuclear Information System (INIS)

Panda, S.; Roy, S.

1992-08-01

We show directly in the Lax operator approach how the Virasoro and W-constraints on the τ-function arise in the p-reduced KP hierarchy or Generalized KdV hierarchy. In particular, we consider the KdV and the Boussinesq hierarchy to show that the Virasoro and the W-constraints follow from the string equation by expanding the ''additional symmetry'' operator in terms of the Lax operator. We also mention how this method could be generalized for higher KdV hierarchies. (author). 34 refs

Fabrication of nano ZrO2 dispersed novel W79Ni10Ti5Nb5 alloy by mechanical alloying and pressureless sintering

Science.gov (United States)

Sahoo, R. R.; Patra, A.; Karak, S. K.

2017-02-01

A high energy planetary ball-mill was employed to synthesize tungsten (W) based alloy with nominal composition of W79Ni10Ti5Nb5(ZrO2)1 (in wt. %) for 20 h with chrome steel as grinding media, toluene as process control agent (PCA) along with compaction at 500 MPa pressure for 5 mins and sintering at 1500°C for 2 h using Ar atmosphere. X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive spectroscopy (EDS), elemental mapping and Transmission electron microscopy (TEM) was used to study the phase formation, microstructure of both milled powder and consolidated alloy. The crystallite size of W in W79Ni10Ti5Nb5(ZrO2)1 powder was 37 nm, 14.7 nm at 10 h and 20 h of milling respectively and lattice strain enhances to 0.54% at 20 h of milling. The crystallite size reduction is more at 10 h of milling and the rate drop beyond 10 to 20 h of milling. The intense improvement in dislocation density was evident upto 10 h of milling and the rate decreases between 10 to 20 h of milling. Increase in the lattice parameter of tungsten in W79Ni10Ti5Nb5(ZrO2)1 alloy upto 0.09% was observed at 10 h of milling owing to severe stress assisted deformation followed by contraction upto 0.07% at 20 h of milling due to formation of solid solution. The large spherical particles at 0 h of milling transformed to elongated shape at 10 h of milling and finer morphology at 20 h of milling. The average particle size reduced from 100 µm to 4.5 µm with the progress of milling from 0 to 20 h. Formation of fine polycrystallites of W was revealed by bright field TEM analysis and the observed crystallite size from TEM study was well supported by the evaluated crystallite size from XRD. XRD pattern and SEM micrograph of sintered alloy revealed the formation of NbNi, Ni3Ti intermetallic phases. Densification of 91.5% was attained in the 20 h milled and sintered alloy. Mechanical behaviour of the sintered product was evaluated by hardness and wear study. W79Ni10Ti5Nb5(ZrO2)1 alloy

44 CFR 78.10 - Project grant approval process.

Science.gov (United States)

2010-10-01

..., DEPARTMENT OF HOMELAND SECURITY INSURANCE AND HAZARD MITIGATION National Flood Insurance Program FLOOD MITIGATION ASSISTANCE § 78.10 Project grant approval process. The State POC will solicit applications from...

Batch calculations in CalcHEP

International Nuclear Information System (INIS)

Pukhov, A.

2003-01-01

CalcHEP is a clone of the CompHEP project which is developed by the author outside of the CompHEP group. CompHEP/CalcHEP are packages for automatic calculations of elementary particle decay and collision properties in the lowest order of perturbation theory. The main idea prescribed into the packages is to make available passing on from the Lagrangian to the final distributions effectively with a high level of automation. According to this, the packages were created as a menu driven user friendly programs for calculations in the interactive mode. From the other side, long-time calculations should be done in the non-interactive regime. Thus, from the beginning CompHEP has a problem of batch calculations. In CompHEP 33.23 the batch session was realized by mean of interactive menu which allows to the user to formulate the task for batch. After that the not-interactive session was launched. This way is too restricted, not flexible, and leads to doubling in programming. In this article I discuss another approach how one can force an interactive program to work in non-interactive mode. This approach was realized in CalcHEP 2.1 disposed on http://theory.sinp.msu.ru/~pukhov/calchep.html

75 FR 10026 - Proposed Collection; Comment Request for Forms W-2, W-2c, W-2AS, W-2GU, W-2VI, W-3, W-3c, W-3cPR...

Science.gov (United States)

2010-03-04

... W-2, W-2c, W-2AS, W-2GU, W-2VI, W-3, W-3c, W-3cPR, W-3PR, and W-3SS AGENCY: Internal Revenue Service....C. 3506(c)(2)(A)). Currently, the IRS is soliciting comments concerning Forms W-2, W-2c, W-2AS, W-2GU, W-2VI, W-3, W-3c, W- 3cPR, W-3PR, and W-3SS. DATES: Written comments should be received on or...

Application of the graded management approach to Battelle's nuclear project

International Nuclear Information System (INIS)

Voth, C.B.

1996-01-01

Battelle's graded management approach provides an effective and efficient method to perform the Battelle Columbus Laboratories Decommissioning Project (BCLDP). The project is managed by Battelle under their US Nuclear Regulatory Commission (NRC) license but is partially funded by the US Department of Energy (DOE) on a cost-shared basis. Battelle's graded management approach adheres to the regulations and orders governing the BCLDP by the interaction of various plans, procedures, permits, and work instructions. By independent assessment, quality control, and worker training, Battelle has been able to establish a cost-effective approach to performing work and, at the same time, have a controlled checks and balance system to assure the proper safety considerations and project particulars are taken into account

Comparisons on International Approaches of Business and Project Risk Management

OpenAIRE

Nadia Carmen ENE

2005-01-01

In this article we intend to present a comparative approach between three recognized international methodologies for risk management: RISKMAN, Project Management Institute Methodology-PMBoK and Project Risk Analysis and Management Guide (produced by Association for Project Management).

Efeito de impactos repetidos de baixa energia em compósitos pultrudados

Directory of Open Access Journals (Sweden)

Morais Willy Ank de

2001-01-01

Full Text Available Danos internos podem ser gerados em compósitos de matriz polimérica submetidos a impactos de baixa energia. O efeito repetido de eventos desse tipo pode levar, eventualmente, à falha da estrutura. Neste trabalho dois tipos de perfis pultrudados foram submetidos a impactos por queda livre de peso de 0,5 m e 1,0 m de altura. Os resultados obtidos foram analisados em função da disposição das fibras nos perfis e mostram que a existência de uma camada rica em resina em um dos perfis, contribui para reduzir significativamente o desempenho deste perfil. Este comportamento foi associado à formação prematura de trincas na camada rica em resina. O número de eventos de impacto, o tempo de duração de cada choque e a forma da área danificada foram correlacionados com a presença, ou não, da região rica em resina. Os resultados obtidos indicam ainda que a diferença na microestrutura dos perfis analisados é mais significativa para os ensaios de menor energia (queda de 0,5 m. Para os ensaios de maior energia (queda de 1 m a configuração do material teve apenas uma importância secundária.

10 CFR 715.3 - Definition of “Nonrecourse Project-Financed”.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Definition of âNonrecourse Project-Financedâ. 715.3 Section 715.3 Energy DEPARTMENT OF ENERGY DEFINITION OF NON-RECOURSE PROJECT-FINANCED § 715.3 Definition... disqualify a facility from being “nonrecourse project-financed” as long as, at the time of the financing for...

Integer 1/0 Knapsack Problem Dynamic Programming Approach in Building Maintenance Optimization

Directory of Open Access Journals (Sweden)

Viska Dewi Fawzy

2017-12-01

Full Text Available The most common problem in urban areas is the high public demand and the limited provision of housing. In meeting the needs of affordable housing for low income communities, the Government of Indonesia implements Rusunawa Project. Object of this research is Pandanarang Rusunawa. Rusunawa Pandanarang is one of the vertical housing in Cilacap that is facing deterioration issue and needs good maintenance management. This study aims at insetting priority and optimizing maintenance plan due to limited funds (limited budget and the amount of damage that must be repaired.This study uses one of the optimization methods of Dynamic Programing on the application of Integer 1/0 Knapsack Problem, to determine an schedule the maintenance activities. The Criteria that are used such as: the level of building components damage and the level of occupants participation. In the first criterion, the benefit (p is the percentage of damage that is fixed with the cost (w. While on the second criterion, the benefit (p is the percentage of occupant participation rate on the maintenance activities with the cost (w. For the budget of Rp 125.000.000, 00, it was obtained from the simulation that the value of the optimum solution on the first criterion at the 7th stage of 71.88% with total cost Rp 106.000.000, 00. At the second criterion, the value of the optimum solution at the 7th stage of 89.29% with total cost Rp 124.000.000, 00.

Systems approach for design control at Monitored Retrievable Storage Project

International Nuclear Information System (INIS)

Kumar, P.N.; Williams, J.R.

1994-01-01

This paper describes the systems approach in establishing design control for the Monitored Retrievable Storage Project design development. Key elements in design control are enumerated and systems engineering aspects are detailed. Application of lessons learned from the Yucca Mountain Project experience is addressed. An integrated approach combining quality assurance and systems engineering requirements is suggested to practice effective design control

Security Administrator Street Smarts A Real World Guide to CompTIA Security+ Skills

CERN Document Server

Miller, David R

2011-01-01

A step-by-step guide to the tasks involved in security administration If you aspire to a career in security administration, one of your greatest challenges will be gaining hands-on experience. This book takes you through the most common security admin tasks step by step, showing you the way around many of the roadblocks you can expect on the job. It offers a variety of scenarios in each phase of the security administrator's job, giving you the confidence of first-hand experience. In addition, this is an ideal complement to the brand-new, bestselling CompTIA Security+ Study Guide, 5th Edition o

Learning from project experiences using a legacy-based approach

Science.gov (United States)

Cooper, Lynne P.; Majchrzak, Ann; Faraj, Samer

2005-01-01

As project teams become used more widely, the question of how to capitalize on the knowledge learned in project teams remains an open issue. Using previous research on shared cognition in groups, an approach to promoting post-project learning was developed. This Legacy Review concept was tested on four in tact project teams. The results from those test sessions were used to develop a model of team learning via group cognitive processes. The model and supporting propositions are presented.

The US EPA CompTox Chemistry Dashboard as a source of data to fill data gaps for chemical sources of risk

Science.gov (United States)

Chemical risk assessment is both time-consuming and difficult because it requires the assembly of data for chemicals generally distributed across multiple sources. The US EPA CompTox Chemistry Dashboard is a publicly accessible web-based application providing access to various da...

W-030, AY/AZ tank farm cooling and miscellaneous instrumentation

International Nuclear Information System (INIS)

Cole, D.B.

1996-01-01

This is the acceptance test report for construction functional testing of Project W-030 cooling systems and related instrumentation. Project W-030 provides a ventilation upgrade for the four Aging Waste Facility tanks. The Tank Farm Cooling System consists of four forced draft cooling towers, a chilled water system, and associated controls

Capping Layer (CL) Induced Antidamping in CL/Py/β-W System (CL: Al, β-Ta, Cu, β-W).

Science.gov (United States)

Behera, Nilamani; Guha, Puspendu; Pandya, Dinesh K; Chaudhary, Sujeet

2017-09-13

For achieving ultrafast switching speed and minimizing dissipation losses, the spin-based data storage device requires a control on effective damping (α eff ) of nanomagnetic bits. Incorporation of interfacial antidamping spin orbit torque (SOT) in spintronic devices therefore has high prospects for enhancing their performance efficiency. Clear evidence of such an interfacial antidamping is found in Al capped Py(15 nm)/β-W(t W )/Si (Py = Ni 81 Fe 19 and t W = thickness of β-W), which is in contrast to the increase of α eff (i.e., damping) usually associated with spin pumping as seen in Py(15 nm)/β-W(t W )/Si system. Because of spin pumping, the interfacial spin mixing conductance (g ↑↓ ) at Py/β-W interface and spin diffusion length (λ SD ) of β-W are found to be 1.63(±0.02) × 10 18 m -2 (1.44(±0.02) × 10 18 m -2 ) and 1.42(±0.19) nm (1.00(±0.10) nm) for Py(15 nm)/β-W(t W )/Si (β-W(t W )/Py(15 nm)/Si) bilayer systems. Other different nonmagnetic capping layers (CL), namely, β-W(2 nm), Cu(2 nm), and β-Ta(2,3,4 nm) were also grown over the same Py(15 nm)/β-W(t W ). However, antidamping is seen only in β-Ta(2,3 nm)/Py(15 nm)/β-W(t W )/Si. This decrease in α eff is attributed to the interfacial Rashba like SOT generated by nonequilibrium spin accumulation subsequent to the spin pumping. Contrary to this, when interlayer positions of Py(15 nm) and β-W(t W ) is interchanged irrespective of the fixed top nonmagnetic layer, an increase of α eff is observed, which is ascribed to spin pumping from Py to β-W layer.

Sprawozdanie z XII Międzynarodowej Konferencji pt. „Edukacja a nowe technologie w kulturze, informacji i komunikacji” (Toruń, 09–10.06.2015)

OpenAIRE

Kwiatkowska, Wioletta

2016-01-01

W dniach 9−10 czerwca 2015 roku odbyła się XII Międzynarodowa Konferencja Naukowa z cyklu „Technologia informacyjna w zmieniającej się edukacji”. Temat przewodni konferencji brzmiał: „Edukacja a nowe technologie w kulturze, informacji i komunikacji”. W tej edycji konferencji poruszane były zagadnienia dotyczące nowych technologii i ich znaczenie dla edukacji. Inicjatywy o takim charakterze podejmowane od kilkunastu lat przez Katedrę Dydaktyki i Mediów w Edukacji wpisały się w tradycję Wydział...

Towards a project-based service delivery approach : Uncovering organisational tensions

OpenAIRE

12330841 - Van der Waldt, Gerrit

2009-01-01

In line with the modernizing, re-inventing and alternative service delivery paradigm, governments increasingly utilise project-based methodologies to improve service delivery. There is general agreement that projects are becoming increasingly important for government institutions to operationalise strategic objectives and policy programmes. This approach is commonly known as ‗Management-by-Projects‘. To adopt this approach requires of public institutions to adjust their existing structures...

System supplier approach to projects and operations efficiency

Energy Technology Data Exchange (ETDEWEB)

Moe, P O [Siemens Offshore A/S (Norway)

1994-12-31

The conference paper outlines the most important elements for a new approach to project realisation that enable a cost reduction of 30-50% compared to conventional methods. The achievements are based on studies and evaluations to the Norwegian Vigdis development project. The system elements covered are the electrical and automation systems including safety and process control and all traditional phases of a project from concept design to the operational phase. The concept involves new principles for project execution where traditional borderlines and interfaces between the various participants have been redefined. Management attention has been verified as an important prerequisite for a successful implementation of this strategy. 2 figs.

APPROACHES FOR EVALUATING AND FINANCING INVESTMENT PROJECTS

Directory of Open Access Journals (Sweden)

MARIA-LOREDANA POPESCU

2011-04-01

Full Text Available This article presents the financial investment approach and the investment evaluation methods, which are criteria for assessing both investment projects and their funding sources. An important role in the analysis carried out is played by the investment decision and financing decision quality. Making an investment decision implies computing the related investment efficiency indicators. They allow the comparison of several variants of the same investment project as well as their comparison with other projects in the same industry or in other industries. The financing decision concerns the selection between their own sources (share capital, depreciation fund, profits, reserve funds, additional capital, revenues from investments, attracted sources (domestic resource mobilization and borrowed sources (credits.

APPLICATION OF PROJECT MANAGEMENT APPROACHES AT A SMALL BUSINESSES ENTERPRISES

OpenAIRE

Sergey V. Rajewski

2016-01-01

This article discusses the types of organizational structures of project management and their application in project management in small and medium-sized enterprises. Among the approaches and methods to organize projects emphasizing project management as part of the existing functional structure of the enterprise. Analyzed the most relevant organizational tools of project management in small business: a network schedule; matrix distribution of administrative and management tasks of the projec...

A Project-based Learning approach for teaching Robotics to ...

African Journals Online (AJOL)

In this research we used a project-based learning approach to teach robotics basics to undergraduate business computing students. The course coverage includes basic electronics, robot construction and programming using arduino. Students developed and tested a robot prototype. The project was evaluated using a ...

Reference Scenario Forecasting: A New Approach to Transport Project Assessment

DEFF Research Database (Denmark)

Salling, Kim Bang; Leleur, Steen; Skougaard, Britt Zoëga

2010-01-01

This paper presents a new approach to transport project assessment in terms of feasibility risk assessment and reference class forecasting. Normally, transport project assessment is based upon a cost-benefit approach where evaluation criteria such as net present values are obtained. Recent research...... construction cost estimates. Hereafter, a quantitative risk analysis is provided making use of Monte Carlo simulation. This stochastic approach facilitates random input parameters based upon reference class forecasting, hence, a parameter data fit has been performed in order to obtain validated probability...... forecasting (RSF) frame. The RSF is anchored in the cost-benefit analysis (CBA), thus, it provides decision-makers with a quantitative mean of assessing the transport infrastructure project. First, the RSF method introduces uncertainties within the CBA by applying Optimism Bias uplifts on the preliminary...

Selecting a MAPLE research reactor core for 1-10 mW operation

International Nuclear Information System (INIS)

Smith, H.J.; Roy, M.-F.; Carlson, P.A.

1986-06-01

The MAPLE class of research reactors is designed so that a single reactor concept can satisfy a wide range of practical applications. This paper reports the results of physics studies performed on a number of potential core configurations fuelled with either 5 w/o or 8 w/o enriched UO 2 or 20 w/o U 3 Si-Al and assesses the relative merits of each. Recommended core designs are given to maximize the neutron fluxes available for scientific application and isotope production

Relational approach in managing construction project safety: a social capital perspective.

Science.gov (United States)

Koh, Tas Yong; Rowlinson, Steve

2012-09-01

Existing initiatives in the management of construction project safety are largely based on normative compliance and error prevention, a risk management approach. Although advantageous, these approaches are not wholly successful in further lowering accident rates. A major limitation lies with the approaches' lack of emphasis on the social and team processes inherent in construction project settings. We advance the enquiry by invoking the concept of social capital and project organisational processes, and their impacts on project safety performance. Because social capital is a primordial concept and affects project participants' interactions, its impact on project safety performance is hypothesised to be indirect, i.e. the impact of social capital on safety performance is mediated by organisational processes in adaptation and cooperation. A questionnaire survey was conducted within Hong Kong construction industry to test the hypotheses. 376 usable responses were received and used for analyses. The results reveal that, while the structural dimension is not significant, the mediational thesis is generally supported with the cognitive and relational dimensions affecting project participants' adaptation and cooperation, and the latter two processes affect safety performance. However, the cognitive dimension also directly affects safety performance. The implications of these results for project safety management are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

THE COMPACT, TIME-VARIABLE RADIO SOURCE PROJECTED INSIDE W3(OH): EVIDENCE FOR A PHOTOEVAPORATED DISK?

Energy Technology Data Exchange (ETDEWEB)

Dzib, Sergio A.; Rodriguez-Garza, Carolina B.; Rodriguez, Luis F.; Kurtz, Stan E.; Loinard, Laurent; Zapata, Luis A.; Lizano, Susana, E-mail: s.dzib@crya.unam.mx [Centro de Radiostronomia y Astrofisica, Universidad Nacional Autonoma de Mexico, Morelia 58089 (Mexico)

2013-08-01

We present new Karl G. Jansky Very Large Array (VLA) observations of the compact ({approx}0.''05), time-variable radio source projected near the center of the ultracompact H II region W3(OH). The analysis of our new data as well as of VLA archival observations confirms the variability of the source on timescales of years and for a given epoch indicates a spectral index of {alpha} = 1.3 {+-} 0.3 (S{sub {nu}}{proportional_to}{nu}{sup {alpha}}). This spectral index and the brightness temperature of the source ({approx}6500 K) suggest that we are most likely detecting partially optically thick free-free radiation. The radio source is probably associated with the ionizing star of W3(OH), but an interpretation in terms of an ionized stellar wind fails because the detected flux densities are orders of magnitude larger than expected. We discuss several scenarios and tentatively propose that the radio emission could arise in a static ionized atmosphere around a fossil photoevaporated disk.

APPLICATION OF PROJECT MANAGEMENT APPROACHES AT A SMALL BUSINESSES ENTERPRISES

Directory of Open Access Journals (Sweden)

Sergey V. Rajewski

2016-01-01

Full Text Available This article discusses the types of organizational structures of project management and their application in project management in small and medium-sized enterprises. Among the approaches and methods to organize projects emphasizing project management as part of the existing functional structure of the enterprise. Analyzed the most relevant organizational tools of project management in small business: a network schedule; matrix distribution of administrative and management tasks of the project; schedule of the project plan; information and technological methods and models used in the process of project management; software applications for project management, used in the sphere of small business.

Derivation of mass relations for composite W* and Z* from effective Lagrangian approach

International Nuclear Information System (INIS)

Yasue, Masaki; Oneda, Sadao.

1985-04-01

In an effective-Lagrangian model with gauge bosons (W,Z,γ) and their neighboring spin J=1 composites (W*,Z*), we find relations among their masses, m sub(W), m sub(Z), m sub(W*) and m sub(Z*): m sub(W) m sub(W*) = cos theta m sub(Z) m sub(Z*) (as a generalization of m sub(W) = cos theta m sub(Z)) and m sub(W) 2 + m sub(W*) 2 + tan 2 theta m sub(W0) 2 = m sub(Z) 2 + m sub(Z*) 2 with m sub(W0) being the mass of W in the standard model provided that the system respects the SU(2) sub(L) x U(1) sub(Y) symmetry. W* and Z* are taken as the lowest-lying excited states belonging to an SU(2) sub(L)-triplet in the symmetric limit. The existence of W* coupling to the V-A current modifies the relation between G sub(F) and M sub(W) and that of Z* generates a new interaction of the (Jsup(em)) 2 -type as well as the deviation of sin theta sub(W) observed at low energies from the mixing angle sin theta in neutral-current interactions. (author)

An approach to establishing cooperative R ampersand D projects with Russian Institutes

International Nuclear Information System (INIS)

Hunter, T.; Albert, T.; Fryberger, T.; Romanovsky, V.

1993-01-01

An important part of technology exchange between the US and the former Soviet Union is the identification and implementation of cooperative projects that benefit both Russia and the US. The US Department of Energy and its laboratories have established an approach to identify potential technologies that can contribute to solving US environmental problems and to establish projects for enhancing technology development. This approach consists of screening technologies for US applications, conducting small-scale pilot projects with Russian scientists to evaluate the validity of mechanisms for larger projects, helping develop direct communication between US and Russian scientists who are developing these technologies, and implementing major projects in specific technology development areas. A recent example of this approach is the initiation of projects between the Khlopin Radium Institute and DOE through Sandia National Laboratories and SAIC. This effort has resulted in not only enhanced technology for the US but has also provided an example for future cooperative projects

Project approach study for nuclear power plants in the Netherlands

International Nuclear Information System (INIS)

1985-11-01

The new nuclear program in the Netherlands comprises the construction of two to four nuclear power plants up to the year 2000. The main objective pursued with the implementation of the nuclear program is the supply of low-cost electricity in the future. In order to prepare the program and to provide a basis for further decisions, the Ministry of Economic Affairs has entrusted Motor-Columbus Consulting Engineers Inc., Baden, Switzerland, with a study to determine the most suitable project approach option(s) for the implementation of the future nuclear program in the Netherlands. In carrying out this study, Motor-Columbus investigated the following main project approach options: 1. turnkey contract approach; 2. split-package contract approach; 3. multi-contract approach. It is concluded that if applied in the appropriate way, the normal turnkey contract approach represents the most suitable approach under the prevailing situation in the Netherlands. (orig.)

34 CFR 429.10 - What types of projects may be funded?

Science.gov (United States)

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What types of projects may be funded? 429.10 Section... of projects may be funded? The Secretary provides assistance through grants, contracts, or... instructional and curriculum materials, methods, or techniques; (c) Training projects to familiarize State...

Architecture of central control system for the 10 MW ECRH-plant at W7-X

Energy Technology Data Exchange (ETDEWEB)

Braune, H. [Max-Plank-Institut fuer Plasmaphysik, Euratom Association Teilinstitut Greifswald, Wendelsteinstrasse 1, D-17491 Greifswald (Germany)], E-mail: harald.braune@ipp.mpg.de; Brand, P. [Universitaet Stuttgart, Institut fuer Plasmaforschung Pfaffenwaldring 31, D-70569 Stuttgart (Germany); Erckmann, V.; Jonitz, L. [Max-Plank-Institut fuer Plasmaphysik, Euratom Association Teilinstitut Greifswald, Wendelsteinstrasse 1, D-17491 Greifswald (Germany); Leonhardt, W.; Mellein, D. [Forschungszentrum Karlsruhe, Association EURATOM-FZK, IHM, FZK, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Michel, G. [Max-Plank-Institut fuer Plasmaphysik, Euratom Association Teilinstitut Greifswald, Wendelsteinstrasse 1, D-17491 Greifswald (Germany); Mueller, G. [Universitaet Stuttgart, Institut fuer Plasmaforschung Pfaffenwaldring 31, D-70569 Stuttgart (Germany); Purps, F. [Max-Plank-Institut fuer Plasmaphysik, Euratom Association Teilinstitut Greifswald, Wendelsteinstrasse 1, D-17491 Greifswald (Germany); Schlueter, K.-H. [Universitaet Stuttgart, Institut fuer Plasmaforschung Pfaffenwaldring 31, D-70569 Stuttgart (Germany); Winkler, M. [Max-Plank-Institut fuer Plasmaphysik, Euratom Association Teilinstitut Greifswald, Wendelsteinstrasse 1, D-17491 Greifswald (Germany)

2007-10-15

Electron Cyclotron Resonance Heating (ECRH) is the main heating method for the Wendelstein 7-X stellarator (W7-X) which is presently under construction at IPP Greifswald. The mission of W7-X is to demonstrate the inherent steady state capability of stellarators at reactor relevant plasma parameters. A modular 10 MW ECRH-plant at 140 GHz with 1 MW CW-capability power for each module is also under construction to support the scientific objectives. The commissioning of the ECRH-plant is well under way; three gyrotrons are operational. The strict modular design allows to operate each gyrotron separately and independent from all others. The ECRH-plant consists of many devices such as gyrotrons and high voltage power supplies, superconductive magnets, collector sweep coils, gyrotron cooling systems with many water circuits and last but not least the quasi-optical transmission line for microwaves with remote controlled mirrors and further water cooled circuits. All these devices are essential for a CW operation. A steady state ECRH has specific requirements on the stellarator machine itself, on the microwave sources, transmission elements and in particular on the central control system. The quasi steady state operation (up to 30 min) asks for real time microwave power adjustment during the different segments of one stellarator discharge. Therefore, the ECRH-plant must operate with a maximum reliability and availability. A capable central control system is an important condition to achieve this goal. The central control system for the 10 MW ECRH-plant at W7-X comprises three main parts. In detail these are the voltage and current regulation of each gyrotron, the interlock system to prevent the gyrotrons from damages and the remote control system based on a hierarchy set of PLCs and computers. The architecture of this central control system is presented.

Measurement of the w boson mass and $w^{+} w^{-}$ production and decay properties in $e^{+}e^{-}$ collisions at s**(1/2) = 172-GeV

CERN Document Server

Ackerstaff, K.; Allison, John; Altekamp, N.; Anderson, K.J.; Anderson, S.; Arcelli, S.; Asai, S.; Axen, D.; Azuelos, G.; Ball, A.H.; Barberio, E.; Barlow, Roger J.; Bartoldus, R.; Batley, J.R.; Baumann, S.; Bechtluft, J.; Beeston, C.; Behnke, T.; Bell, A.N.; Bell, Kenneth Watson; Bella, G.; Bentvelsen, S.; Bethke, S.; Biebel, O.; Biguzzi, A.; Bird, S.D.; Blobel, V.; Bloodworth, I.J.; Bloomer, J.E.; Bobinski, M.; Bock, P.; Bonacorsi, D.; Boutemeur, M.; Bouwens, B.T.; Braibant, S.; Brigliadori, L.; Brown, Robert M.; Burckhart, H.J.; Burgard, C.; Burgin, R.; Capiluppi, P.; Carnegie, R.K.; Carter, A.A.; Carter, J.R.; Chang, C.Y.; Charlton, David G.; Chrisman, D.; Clarke, P.E.L.; Cohen, I.; Conboy, J.E.; Cooke, O.C.; Cuffiani, M.; Dado, S.; Dallapiccola, C.; Dallavalle, G.Marco; Davies, R.; De Jong, S.; del Pozo, L.A.; Desch, K.; Dienes, B.; Dixit, M.S.; do Couto e Silva, E.; Doucet, M.; Duchovni, E.; Duckeck, G.; Duerdoth, I.P.; Eatough, D.; Edwards, J.E.G.; Estabrooks, P.G.; Evans, H.G.; Evans, M.; Fabbri, F.; Fanti, M.; Faust, A.A.; Fiedler, F.; Fierro, M.; Fischer, H.M.; Fleck, I.; Folman, R.; Fong, D.G.; Foucher, M.; Furtjes, A.; Futyan, D.I.; Gagnon, P.; Gary, J.W.; Gascon, J.; Gascon-Shotkin, S.M.; Geddes, N.I.; Geich-Gimbel, C.; Geralis, T.; Giacomelli, G.; Giacomelli, P.; Giacomelli, R.; Gibson, V.; Gibson, W.R.; Gingrich, D.M.; Glenzinski, D.; Goldberg, J.; Goodrick, M.J.; Gorn, W.; Grandi, C.; Gross, E.; Grunhaus, J.; Gruwe, M.; Hajdu, C.; Hanson, G.G.; Hansroul, M.; Hapke, M.; Hargrove, C.K.; Hart, P.A.; Hartmann, C.; Hauschild, M.; Hawkes, C.M.; Hawkings, R.; Hemingway, R.J.; Herndon, M.; Herten, G.; Heuer, R.D.; Hildreth, M.D.; Hill, J.C.; Hillier, S.J.; Hobson, P.R.; Homer, R.J.; Honma, A.K.; Horvath, D.; Hossain, K.R.; Howard, R.; Huntemeyer, P.; Hutchcroft, D.E.; Igo-Kemenes, P.; Imrie, D.C.; Ingram, M.R.; Ishii, K.; Jawahery, A.; Jeffreys, P.W.; Jeremie, H.; Jimack, M.; Joly, A.; Jones, C.R.; Jones, G.; Jones, M.; Jost, U.; Jovanovic, P.; Junk, T.R.; Karlen, D.; Kartvelishvili, V.; Kawagoe, K.; Kawamoto, T.; Kayal, P.I.; Keeler, R.K.; Kellogg, R.G.; Kennedy, B.W.; Kirk, J.; Klier, A.; Kluth, S.; Kobayashi, T.; Kobel, M.; Koetke, D.S.; Kokott, T.P.; Kolrep, M.; Komamiya, S.; Kress, T.; Krieger, P.; von Krogh, J.; Kyberd, P.; Lafferty, G.D.; Lahmann, R.; Lai, W.P.; Lanske, D.; Lauber, J.; Lautenschlager, S.R.; Layter, J.G.; Lazic, D.; Lee, A.M.; Lefebvre, E.; Lellouch, D.; Letts, J.; Levinson, L.; Lloyd, S.L.; Loebinger, F.K.; Long, G.D.; Losty, M.J.; Ludwig, J.; Macchiolo, A.; Macpherson, A.; Mannelli, M.; Marcellini, S.; Markus, C.; Martin, A.J.; Martin, J.P.; Martinez, G.; Mashimo, T.; Mattig, Peter; McDonald, W.John; McKenna, J.; Mckigney, E.A.; McMahon, T.J.; McPherson, R.A.; Meijers, F.; Menke, S.; Merritt, F.S.; Mes, H.; Meyer, J.; Michelini, A.; Mikenberg, G.; Miller, D.J.; Mincer, A.; Mir, R.; Mohr, W.; Montanari, A.; Mori, T.; Morii, M.; Muller, U.; Mihara, S.; Nagai, K.; Nakamura, I.; Neal, H.A.; Nellen, B.; Nisius, R.; O'Neale, S.W.; Oakham, F.G.; Odorici, F.; Ogren, H.O.; Oh, A.; Oldershaw, N.J.; Oreglia, M.J.; Orito, S.; Palinkas, J.; Pasztor, G.; Pater, J.R.; Patrick, G.N.; Patt, J.; Pearce, M.J.; Perez-Ochoa, R.; Petzold, S.; Pfeifenschneider, P.; Pilcher, J.E.; Pinfold, J.; Plane, David E.; Poffenberger, P.; Poli, B.; Posthaus, A.; Rees, D.L.; Rigby, D.; Robertson, S.; Robins, S.A.; Rodning, N.; Roney, J.M.; Rooke, A.; Ros, E.; Rossi, A.M.; Routenburg, P.; Rozen, Y.; Runge, K.; Runolfsson, O.; Ruppel, U.; Rust, D.R.; Rylko, R.; Sachs, K.; Saeki, T.; Sarkisian, E.K.G.; Sbarra, C.; Schaile, A.D.; Schaile, O.; Scharf, F.; Scharff-Hansen, P.; Schenk, P.; Schieck, J.; Schleper, P.; Schmitt, B.; Schmitt, S.; Schoning, A.; Schroder, Matthias; Schultz-Coulon, H.C.; Schumacher, M.; Schwick, C.; Scott, W.G.; Shears, T.G.; Shen, B.C.; Shepherd-Themistocleous, C.H.; Sherwood, P.; Siroli, G.P.; Sittler, A.; Skillman, A.; Skuja, A.; Smith, A.M.; Snow, G.A.; Sobie, R.; Soldner-Rembold, S.; Springer, Robert Wayne; Sproston, M.; Stephens, K.; Steuerer, J.; Stockhausen, B.; Stoll, K.; Strom, David M.; Szymanski, P.; Tafirout, R.; Talbot, S.D.; Tanaka, S.; Taras, P.; Tarem, S.; Teuscher, R.; Thiergen, M.; Thomson, M.A.; von Torne, E.; Towers, S.; Trigger, I.; Trocsanyi, Z.; Tsur, E.; Turcot, A.S.; Turner-Watson, M.F.; Utzat, P.; Van Kooten, Rick J.; Verzocchi, M.; Vikas, P.; Vokurka, E.H.; Voss, H.; Wackerle, F.; Wagner, A.; Ward, C.P.; Ward, D.R.; Watkins, P.M.; Watson, A.T.; Watson, N.K.; Wells, P.S.; Wermes, N.; White, J.S.; Wilkens, B.; Wilson, G.W.; Wilson, J.A.; Wolf, G.; Wyatt, T.R.; Yamashita, S.; Yekutieli, G.; Zacek, V.; Zer-Zion, D.

1998-01-01

This paper describes the measurement of the W boson mass, M_W, and decay width, Gamma_W, from the direct reconstruction of the invariant mass of its decay products in W pair events collected at a mean centre-of-mass energy of sqrt{s} = 172.12 GeV with the OPAL detector at LEP. Measurements of the W pair production cross-section, the W decay branching fractions and properties of the W decay final states are also described. A total of 120 candidate W^+W^- events has been selected for an integrated luminosity of 10.36 pb^-1. The W^+W^- production cross-section is measured to be sigma_WW = 12.3 +/- 1.3(stat.) +/- 0.3(syst.) pb, consistent with the Standard Model expectation. The W^+W^- -> qq(bar) l nu and W^+W^- -> qq(bar)qq(bar) final states are used to obtain a direct measurement of Gamma_W = 1.30^{+0.62}_{-0.55}(stat.) +/- 0.18(syst.) GeV. Assuming the Standard Model relation between M_W and Gamma_W, the W boson mass is measured to be M_W = 80.32 +/- 0.30(stat.) +/- 0.09(syst.) GeV. The event properties of the...

10 CFR Appendix W to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Medium Base Compact Fluorescent Lamps

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Uniform Test Method for Measuring the Energy Consumption of Medium Base Compact Fluorescent Lamps W Appendix W to Subpart B of Part 430 Energy DEPARTMENT OF... the previous step. Round the final energy consumption value, as applicable, to the nearest decimal...

A projective approach to a language of landscape design

Directory of Open Access Journals (Sweden)

Catherine Ward Thompson

1997-10-01

Full Text Available Building on the work of Kelly (1955 in personal construct psychology, and Peled (1976, I990 in ecoanalysis, this paper develops projective techniques-which use concepts of personal and phenomenological space-as a means for articulating approaches to landscape design. The projective approach involves two stages. In stage one, projective techniques are used to elicit personal constructs (which may be held at a pre-conscious or sub-conscious level, allowing the holistic experience of landscape to be explored. In stage two, using a 'projection location task' derived from the way we experience and construe the regions of our own bodies, elements of these constructs can then be articulated so as to inform the way we interact and engage with the space around us. This gives insight into the meaning of spatial layouts, which can then be translated into a design language for the structural ordering of space. The author draws on original research conducted with children as well as adults, using projective techniques to draw out their desires and needs in relation to designing their landscape environment. The paper discusses the value of such methods for landscape designers and their clients, and outlines some ongoing research to test the validity of the projection location task.

Nanocarbon–{[Na10(PrW10O36]2·130H2O} composite to detect toxic food coloring dyes at nanolevel

Directory of Open Access Journals (Sweden)

Taposhree Dutta

2016-04-01

Full Text Available Abstract Monitoring of adulterated and toxic food colors is important due to their potential toxicity and pathogenicity. Here, we repot an Ln–POM (lanthanide polyoxometalate cluster, {[Na10(PrW10O36]2·130H2O}, with carbon nano-onion (CNO hybrid composite which is a highly efficient sensor for the rapid detection of toxic dyes like metanil yellow, auramine O, Orange II and in allura red (red 40 as low as 3.83; 4.73; 4.14 and 2.90 nmol ml−1 concentration, respectively, by fluorescence spectroscopy.

Compósito de colágeno com silicato e hidroxiapatita como material para endodontia: preparação e caracterização = Collagen composite with silicate and hydroxyapatite as endodontic material: preparation and characterization

Directory of Open Access Journals (Sweden)

E'Gues, Miguel Antônio Menezes

2008-01-01

Full Text Available Objetivo: Este trabalho teve por objetivo preparar e caracterizar um novo compósito de colágeno com silicato e hidroxiapatita que possa vir a ser utilizado como material endodôntico em capeamento pulpar direto e em pulpotomia. Metodologia: Os materiais utilizados como matéria-prima foram colágeno do tipo I na forma aniônica, silicato (cimento Portland Branco e hidroxiapatita sintetizada. Estes materiais foram misturados em proporções variadas de modo a obter um material compósito na forma de pasta. Os materiais obtidos foram caracterizados por técnicas de calorimetria exploratória diferencial, termogravimetria, microscopia eletrônica de varredura (MEV, espectrometria de dispersão de energia de Raios-X e espectroscopia na região do infravermelho. Resultados: A presença de colágeno no compósito foi demonstrada por transições térmicas típicas daquelas encontradas para o colágeno do tipo I (~48ºC, independentemente da proporção utilizada, e também por imagens de MEV, onde as fibras colagênicas também puderam ser observadas interligando as partículas de silicato. A composição química de todos compósitos de colágeno foi praticamente idêntica à do silicato utilizado. Conclusão: Os resultados mostraram que a estrutura da matriz de colágeno nos compósitos testados não foi alterada. Esta é uma característica importante para a utilização em endodontia do material compósito proposto, objetivando uma reparação tecidual de forma "mais natural"

USING OF THE PROJECT-ORIENTED APPROACH IN THE INNOVATIVE ACTIVITY MANAGEMENT

Directory of Open Access Journals (Sweden)

Варвара Михайлівна ПІТЕРСЬКА

2016-02-01

Full Text Available The article describes the current state of science in Ukraine, indicated the main directions of research funding. The methodological approach of working out of the project-oriented strategy of innovative development of scientific activity, including the implementation of international trends and support of research is proposed. Using of a project-oriented approach of research activities due to the need of reducing of the research cycle and strengthen expenditure control capabilities due to restrictions of funding research projects from the state. It should be noted that the structuring of research, given the project approach, allows engaging of the implementation of the research project professionals with good knowledge and skills and create a team activity focused on quality results. Innovations aren‘t still properly means the improvement of competitiveness in Ukraine. Thus, the problem of transition to an innovative development model retains its relevance, that significantly enhanced in the light of current external and internal trends. Using of the project-oriented innovation management due to the need to shorten the cycle of research and to strengthen the control over the expenditure of funds in connection with the limited funding of scientific research by the state.