WorldWideScience

Sample records for communicating process architectures

  1. Reconfigurable Signal Processing and Hardware Architecture for Broadband Wireless Communications

    Directory of Open Access Journals (Sweden)

    Liang Ying-Chang

    2005-01-01

    Full Text Available This paper proposes a broadband wireless transceiver which can be reconfigured to any type of cyclic-prefix (CP -based communication systems, including orthogonal frequency-division multiplexing (OFDM, single-carrier cyclic-prefix (SCCP system, multicarrier (MC code-division multiple access (MC-CDMA, MC direct-sequence CDMA (MC-DS-CDMA, CP-based CDMA (CP-CDMA, and CP-based direct-sequence CDMA (CP-DS-CDMA. A hardware platform is proposed and the reusable common blocks in such a transceiver are identified. The emphasis is on the equalizer design for mobile receivers. It is found that after block despreading operation, MC-DS-CDMA and CP-DS-CDMA have the same equalization blocks as OFDM and SCCP systems, respectively, therefore hardware and software sharing is possible for these systems. An attempt has also been made to map the functional reconfigurable transceiver onto the proposed hardware platform. The different functional entities which will be required to perform the reconfiguration and realize the transceiver are explained.

  2. Architecture and communication

    Directory of Open Access Journals (Sweden)

    Špela Hudnik

    2003-01-01

    Full Text Available The article presents effects of technology, science and capital strategies on changes in traditional forms and definitions of space, architecture and bodies. It confronts us with new processes of thinking and living that are constantly being transformed into new dynamic time and spatial contexts. Space is becoming the information filter, communication network. A cross-section of three landscapes: landscape of megastructures, nomadic landscapes and psychedelic landscapes, theory contributes to understanding of media and space-age technology, information technology and electronical language. It offers designs of various megastructures, media surfaces and envelopes of contemporary information society: the anthropological module, hyper- and infra-bodies, bio-electronical bodies and population genetics bodies. It presents the architecture of communication.

  3. Multimedia communications: architectural alternatives

    Science.gov (United States)

    McGarty, Terrence P.; Treves, S. T.

    1992-03-01

    Multimedia communications systems are a combination of human interfaces and end users interacting with multimedia data bases and highly disparate but interconnected communications networks. This paper discusses several architectural alternatives and system requirements that will assist in the design and development of MMCS in actual environments. The approaches taken in this paper are based upon the development of such systems in both medical and printing and publishing environments. This paper develops several key concepts as how best to define and structure data in a multimedia environment, how best to integrate the communications elements, and how best to permit the maximum flexibility to the end user to utilize the system's capabilities in the context of a fully conversational environment.

  4. Communication of IT-Architecture

    NARCIS (Netherlands)

    Koning, H.

    2008-01-01

    This PhD thesis contains the results of various research activities that fall under the topic ‘communication of IT-architecture’. The term IT-architecture defines the various types of architecture that can be found in the domain of Information Technology (software architecture, enterprise

  5. Architectural communication: Intra and extra activity of architecture

    Directory of Open Access Journals (Sweden)

    Stamatović-Vučković Slavica

    2013-01-01

    Full Text Available Apart from a brief overview of architectural communication viewed from the standpoint of theory of information and semiotics, this paper contains two forms of dualistically viewed architectural communication. The duality denotation/connotation (”primary” and ”secondary” architectural communication is one of semiotic postulates taken from Umberto Eco who viewed architectural communication as a semiotic phenomenon. In addition, architectural communication can be viewed as an intra and an extra activity of architecture where the overall activity of the edifice performed through its spatial manifestation may be understood as an act of communication. In that respect, the activity may be perceived as the ”behavior of architecture”, which corresponds to Lefebvre’s production of space.

  6. RASSP signal processing architectures

    Science.gov (United States)

    Shirley, Fred; Bassett, Bob; Letellier, J. P.

    1995-06-01

    The rapid prototyping of application specific signal processors (RASSP) program is an ARPA/tri-service effort to dramatically improve the process by which complex digital systems, particularly embedded signal processors, are specified, designed, documented, manufactured, and supported. The domain of embedded signal processing was chosen because it is important to a variety of military and commercial applications as well as for the challenge it presents in terms of complexity and performance demands. The principal effort is being performed by two major contractors, Lockheed Sanders (Nashua, NH) and Martin Marietta (Camden, NJ). For both, improvements in methodology are to be exercised and refined through the performance of individual 'Demonstration' efforts. The Lockheed Sanders' Demonstration effort is to develop an infrared search and track (IRST) processor. In addition, both contractors' results are being measured by a series of externally administered (by Lincoln Labs) six-month Benchmark programs that measure process improvement as a function of time. The first two Benchmark programs are designing and implementing a synthetic aperture radar (SAR) processor. Our demonstration team is using commercially available VME modules from Mercury Computer to assemble a multiprocessor system scalable from one to hundreds of Intel i860 microprocessors. Custom modules for the sensor interface and display driver are also being developed. This system implements either proprietary or Navy owned algorithms to perform the compute-intensive IRST function in real time in an avionics environment. Our Benchmark team is designing custom modules using commercially available processor ship sets, communication submodules, and reconfigurable logic devices. One of the modules contains multiple vector processors optimized for fast Fourier transform processing. Another module is a fiberoptic interface that accepts high-rate input data from the sensors and provides video-rate output data to a

  7. Communicating Process Achitectures 2005

    NARCIS (Netherlands)

    Broenink, Jan F.; Roebbers, Herman W.; Sunters, Johan P.E.; Welch, Peter H.; Wood, David C.

    2005-01-01

    The awareness of the ideas characterized by Communicating Processes Architecture and their adoption by industry beyond their traditional base in safety-critical systems and security is growing. The complexity of modern computing systems has become so great that no one person – maybe not even a small

  8. The NASA Space Communications Data Networking Architecture

    Science.gov (United States)

    Israel, David J.; Hooke, Adrian J.; Freeman, Kenneth; Rush, John J.

    2006-01-01

    The NASA Space Communications Architecture Working Group (SCAWG) has recently been developing an integrated agency-wide space communications architecture in order to provide the necessary communication and navigation capabilities to support NASA's new Exploration and Science Programs. A critical element of the space communications architecture is the end-to-end Data Networking Architecture, which must provide a wide range of services required for missions ranging from planetary rovers to human spaceflight, and from sub-orbital space to deep space. Requirements for a higher degree of user autonomy and interoperability between a variety of elements must be accommodated within an architecture that necessarily features minimum operational complexity. The architecture must also be scalable and evolvable to meet mission needs for the next 25 years. This paper will describe the recommended NASA Data Networking Architecture, present some of the rationale for the recommendations, and will illustrate an application of the architecture to example NASA missions.

  9. Communication architectures for systems-on-chip

    CERN Document Server

    Ayala, Jose L

    2011-01-01

    A presentation of state-of-the-art approaches from an industrial applications perspective, Communication Architectures for Systems-on-Chip shows professionals, researchers, and students how to attack the problem of data communication in the manufacture of SoC architectures. With its lucid illustration of current trends and research improving the performance, quality, and reliability of transactions, this is an essential reference for anyone dealing with communication mechanisms for embedded systems, systems-on-chip, and multiprocessor architectures--or trying to overcome existing limitations.

  10. Communications architecture for an electric company, European utility communications architecture, EURUCA

    Energy Technology Data Exchange (ETDEWEB)

    Uuspaeae, P. [VTT Energy, Espoo (Finland)

    1998-08-01

    The scope of this research is integration and interoperability of various information systems and data communications for electric utilities. Utility Communication Architecture refers to an overall view of the communications needs and communication systems in an electric utility. The objective is to define and specify suitable and compatible communications procedures within the Utility and also to outside parties

  11. Group cell architecture for cooperative communications

    CERN Document Server

    Tao, Xiaofeng; Xu, Xiaodong

    2014-01-01

    Driven by the increasing demand for capacity and Quality of Service in wireless cellular networks and motivated by the distributed antenna system, the authors proposed a cooperative communication architecture-Group Cell architecture, which was initially brought forward in 2001. Years later, Coordinated Multiple-Point Transmission and Reception (CoMP) for LTE-Advanced was put forward in April 2008, as a tool to improve the coverage of cells having high data rates, the cell-edge throughput and/or to increase system throughput. This book mainly focuses on the Group Cell architecture with multi-cell generalized coordination, Contrast Analysis between Group Cell architecture and CoMP, Capacity Analysis, Slide Handover Strategy, Power Allocation schemes of Group Cell architecture to mitigate the inter-cell interference and maximize system capacity and the trial network implementation and performance evaluations of Group Cell architecture.

  12. Power, Avionics and Software Communication Network Architecture

    Science.gov (United States)

    Ivancic, William D.; Sands, Obed S.; Bakula, Casey J.; Oldham, Daniel R.; Wright, Ted; Bradish, Martin A.; Klebau, Joseph M.

    2014-01-01

    This document describes the communication architecture for the Power, Avionics and Software (PAS) 2.0 subsystem for the Advanced Extravehicular Mobile Unit (AEMU). The following systems are described in detail: Caution Warn- ing and Control System, Informatics, Storage, Video, Audio, Communication, and Monitoring Test and Validation. This document also provides some background as well as the purpose and goals of the PAS project at Glenn Research Center (GRC).

  13. Extensible packet processing architecture

    Science.gov (United States)

    Robertson, Perry J.; Hamlet, Jason R.; Pierson, Lyndon G.; Olsberg, Ronald R.; Chun, Guy D.

    2013-08-20

    A technique for distributed packet processing includes sequentially passing packets associated with packet flows between a plurality of processing engines along a flow through data bus linking the plurality of processing engines in series. At least one packet within a given packet flow is marked by a given processing engine to signify by the given processing engine to the other processing engines that the given processing engine has claimed the given packet flow for processing. A processing function is applied to each of the packet flows within the processing engines and the processed packets are output on a time-shared, arbitered data bus coupled to the plurality of processing engines.

  14. Extensible packet processing architecture

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, Perry J.; Hamlet, Jason R.; Pierson, Lyndon G.; Olsberg, Ronald R.; Chun, Guy D.

    2013-08-20

    A technique for distributed packet processing includes sequentially passing packets associated with packet flows between a plurality of processing engines along a flow through data bus linking the plurality of processing engines in series. At least one packet within a given packet flow is marked by a given processing engine to signify by the given processing engine to the other processing engines that the given processing engine has claimed the given packet flow for processing. A processing function is applied to each of the packet flows within the processing engines and the processed packets are output on a time-shared, arbitered data bus coupled to the plurality of processing engines.

  15. Communication Synthesis for Interconnect Minimization in Multicycle Communication Architecture

    Science.gov (United States)

    Huang, Ya-Shih; Hong, Yu-Ju; Huang, Juinn-Dar

    In deep-submicron technology, several state-of-the-art architectural synthesis flows have already adopted the distributed register architecture to cope with the increasing wire delay by allowing multicycle communication. In this article, we regard communication synthesis targeting a refined regular distributed register architecture, named RDR-GRS, as a problem of simultaneous data transfer routing and scheduling for global interconnect resource minimization. We also present an innovative algorithm with regard of both spatial and temporal perspectives. It features both a concentration-oriented path router gathering wire-sharable data transfers and a channel-based time scheduler resolving contentions for wires in a channel, which are in spatial and temporal domain, respectively. The experimental results show that the proposed algorithm can significantly outperform existing related works.

  16. Communicative competence and the architecture of the mind/brain.

    Science.gov (United States)

    Tirassa, M

    1999-07-01

    Cognitive pragmatics is concerned with the mental processes involved in intentional communication. I discuss a few issues that may help clarify the relationship between this area and the broader cognitive science and the contribution that they give, or might give, to each other. Rather than dwelling on the many technicalities of the various theories of communication that have been advanced, I focus on the different conceptions of the nature and the architecture of the mind/brain that underlie them. My aims are, first, to introduce and defend mentalist views of communication in general; second, to defend one such view, namely that communication is a cognitive competence, that is, a faculty, and the underlying idea that the architecture of the mind/brain is domain-specific; and, third, to review the (scarce) neuropsychological evidence that bears on these issues.

  17. Optimal architectures for long distance quantum communication.

    Science.gov (United States)

    Muralidharan, Sreraman; Li, Linshu; Kim, Jungsang; Lütkenhaus, Norbert; Lukin, Mikhail D; Jiang, Liang

    2016-02-15

    Despite the tremendous progress of quantum cryptography, efficient quantum communication over long distances (≥ 1000 km) remains an outstanding challenge due to fiber attenuation and operation errors accumulated over the entire communication distance. Quantum repeaters (QRs), as a promising approach, can overcome both photon loss and operation errors, and hence significantly speedup the communication rate. Depending on the methods used to correct loss and operation errors, all the proposed QR schemes can be classified into three categories (generations). Here we present the first systematic comparison of three generations of quantum repeaters by evaluating the cost of both temporal and physical resources, and identify the optimized quantum repeater architecture for a given set of experimental parameters for use in quantum key distribution. Our work provides a roadmap for the experimental realizations of highly efficient quantum networks over transcontinental distances.

  18. Optimal architectures for long distance quantum communication

    Science.gov (United States)

    Muralidharan, Sreraman; Li, Linshu; Kim, Jungsang; Lütkenhaus, Norbert; Lukin, Mikhail D.; Jiang, Liang

    2016-02-01

    Despite the tremendous progress of quantum cryptography, efficient quantum communication over long distances (≥1000 km) remains an outstanding challenge due to fiber attenuation and operation errors accumulated over the entire communication distance. Quantum repeaters (QRs), as a promising approach, can overcome both photon loss and operation errors, and hence significantly speedup the communication rate. Depending on the methods used to correct loss and operation errors, all the proposed QR schemes can be classified into three categories (generations). Here we present the first systematic comparison of three generations of quantum repeaters by evaluating the cost of both temporal and physical resources, and identify the optimized quantum repeater architecture for a given set of experimental parameters for use in quantum key distribution. Our work provides a roadmap for the experimental realizations of highly efficient quantum networks over transcontinental distances.

  19. Editorial: Architecture as a Communicative Medium

    Directory of Open Access Journals (Sweden)

    Anijo Mathew

    2012-10-01

    Full Text Available Environmental psychology categorizes “physicalenvironment” as “typically neutral,” only coming into selfconscious awareness when individuals form stable andenduring representations of it [1]. We see this manifest inthe real world when the steeple of a church is able to communicate that it is a place for reflection and religious gathering; the bricks and ivy of Harvard Yard signifies years of scholarly research and education; the solid grey walls ofa prison conjures up images of torture and punishment; and the bright colors of a playground indicates play and joyfulness. In our relationship with architecture, we are ableto construct an understanding of our environment becausewe pick up such clues and cues from parts of ourenvironment and then construct a formulation of the whole based on our memories and knowledge. Thus, we are ableto communicate with the places we live in and the placeswe live in are able to act as interfaces for information interchange.

  20. GPGPU Processing in CUDA Architecture

    CERN Document Server

    Ghorpade, Jayshree; Kulkarni, Madhura; Bawaskar, Amit

    2012-01-01

    The future of computation is the Graphical Processing Unit, i.e. the GPU. The promise that the graphics cards have shown in the field of image processing and accelerated rendering of 3D scenes, and the computational capability that these GPUs possess, they are developing into great parallel computing units. It is quite simple to program a graphics processor to perform general parallel tasks. But after understanding the various architectural aspects of the graphics processor, it can be used to perform other taxing tasks as well. In this paper, we will show how CUDA can fully utilize the tremendous power of these GPUs. CUDA is NVIDIA's parallel computing architecture. It enables dramatic increases in computing performance, by harnessing the power of the GPU. This paper talks about CUDA and its architecture. It takes us through a comparison of CUDA C/C++ with other parallel programming languages like OpenCL and DirectCompute. The paper also lists out the common myths about CUDA and how the future seems to be pro...

  1. GPGPU PROCESSING IN CUDA ARCHITECTURE

    Directory of Open Access Journals (Sweden)

    Jayshree Ghorpade

    2012-02-01

    Full Text Available The future of computation is the Graphical Processing Unit, i.e. the GPU. The promise that the graphicscards have shown in the field of image processing and accelerated rendering of 3D scenes, and thecomputational capability that these GPUs possess, they are developing into great parallel computingunits. It is quite simple to program a graphics processor to perform general parallel tasks. But afterunderstanding the various architectural aspects of the graphics processor, it can be used to performother taxing tasks as well. In this paper, we will show how CUDA can fully utilize the tremendous powerof these GPUs. CUDA is NVIDIA’s parallel computing architecture. It enables dramatic increases incomputing performance, by harnessing the power of the GPU. This paper talks about CUDA and itsarchitecture. It takes us through a comparison of CUDA C/C++ with other parallel programminglanguages like OpenCL and DirectCompute. The paper also lists out the common myths about CUDAand how the future seems to be promising for CUDA.

  2. Operational Concepts for a Generic Space Exploration Communication Network Architecture

    Science.gov (United States)

    Ivancic, William D.; Vaden, Karl R.; Jones, Robert E.; Roberts, Anthony M.

    2015-01-01

    This document is one of three. It describes the Operational Concept (OpsCon) for a generic space exploration communication architecture. The purpose of this particular document is to identify communication flows and data types. Two other documents accompany this document, a security policy profile and a communication architecture document. The operational concepts should be read first followed by the security policy profile and then the architecture document. The overall goal is to design a generic space exploration communication network architecture that is affordable, deployable, maintainable, securable, evolvable, reliable, and adaptable. The architecture should also require limited reconfiguration throughout system development and deployment. System deployment includes: subsystem development in a factory setting, system integration in a laboratory setting, launch preparation, launch, and deployment and operation in space.

  3. Jupiter Europa Orbiter Architecture Definition Process

    Science.gov (United States)

    Rasmussen, Robert; Shishko, Robert

    2011-01-01

    The proposed Jupiter Europa Orbiter mission, planned for launch in 2020, is using a new architectural process and framework tool to drive its model-based systems engineering effort. The process focuses on getting the architecture right before writing requirements and developing a point design. A new architecture framework tool provides for the structured entry and retrieval of architecture artifacts based on an emerging architecture meta-model. This paper describes the relationships among these artifacts and how they are used in the systems engineering effort. Some early lessons learned are discussed.

  4. COMMUNICATION PROCESSES AND STRATEGIES

    Institute of Scientific and Technical Information of China (English)

    1996-01-01

    IntroductionThe main goal of studying a foreign language is to be able to communicate.The essence ofcommunication is sending and receiving messages and negotiating meaning.During the communicationprocess,learners may meet problems which hinder their understanding.In order to overcome theselimitations,it is very.important to know and use certain strategies involved in the communicationprocesses.There are three basic activities in the communication process-expressing intensions,interpretation andnegotiation.Expressing intentions is giving information.During communication,every speaker has tofirst send his or her messages and the listener must decode what he or she has heard.This activity may becalled interpretation.During conversation,both listener and speaker must do some negotiation in orderto make sure that they understand each other.Negotiation could be called communication exchange.

  5. Security Policy for a Generic Space Exploration Communication Network Architecture

    Science.gov (United States)

    Ivancic, William D.; Sheehe, Charles J.; Vaden, Karl R.

    2016-01-01

    This document is one of three. It describes various security mechanisms and a security policy profile for a generic space-based communication architecture. Two other documents accompany this document- an Operations Concept (OpsCon) and a communication architecture document. The OpsCon should be read first followed by the security policy profile described by this document and then the architecture document. The overall goal is to design a generic space exploration communication network architecture that is affordable, deployable, maintainable, securable, evolvable, reliable, and adaptable. The architecture should also require limited reconfiguration throughout system development and deployment. System deployment includes subsystem development in a factory setting, system integration in a laboratory setting, launch preparation, launch, and deployment and operation in space.

  6. Architectures for ku-band broadband airborne satellite communication antennas

    NARCIS (Netherlands)

    Verpoorte, Jaco; Schippers, Harmen; Jorna, Pieter; Roeloffzen, Chris G.H.; Marpaung, David A.I.; Baggen, Rens; Sanadgol, Bahram

    2010-01-01

    This paper describes different architectures for a broadband antenna for satellite communication on aircraft. The antenna is a steerable (conformal) phased array antenna in Ku-band (receive-only). First the requirements for such a system are addressed. Subsequently a number of potential architecture

  7. Analyzing Resiliency of the Smart Grid Communication Architectures

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-08-01

    Smart grids are susceptible to cyber-attack as a result of new communication, control and computation techniques employed in the grid. In this paper, we characterize and analyze the resiliency of smart grid communication architecture, specifically an RF mesh based architecture, under cyber attacks. We analyze the resiliency of the communication architecture by studying the performance of high-level smart grid functions such as metering, and demand response which depend on communication. Disrupting the operation of these functions impacts the operational resiliency of the smart grid. Our analysis shows that it takes an attacker only a small fraction of meters to compromise the communication resiliency of the smart grid. We discuss the implications of our result to critical smart grid functions and to the overall security of the smart grid.

  8. Analyzing Resiliency of the Smart Grid Communication Architectures

    Energy Technology Data Exchange (ETDEWEB)

    Anas AlMajali, Anas; Viswanathan, Arun; Neuman, Clifford

    2016-08-01

    Smart grids are susceptible to cyber-attack as a result of new communication, control and computation techniques employed in the grid. In this paper, we characterize and analyze the resiliency of smart grid communication architecture, specifically an RF mesh based architecture, under cyber attacks. We analyze the resiliency of the communication architecture by studying the performance of high-level smart grid functions such as metering, and demand response which depend on communication. Disrupting the operation of these functions impacts the operational resiliency of the smart grid. Our analysis shows that it takes an attacker only a small fraction of meters to compromise the communication resiliency of the smart grid. We discuss the implications of our result to critical smart grid functions and to the overall security of the smart grid.

  9. Space Mobile Network: A Near Earth Communication and Navigation Architecture

    Science.gov (United States)

    Israel, Dave J.; Heckler, Greg; Menrad, Robert J.

    2016-01-01

    This paper describes a Space Mobile Network architecture, the result of a recently completed NASA study exploring architectural concepts to produce a vision for the future Near Earth communications and navigation systems. The Space Mobile Network (SMN) incorporates technologies, such as Disruption Tolerant Networking (DTN) and optical communications, and new operations concepts, such as User Initiated Services, to provide user services analogous to a terrestrial smartphone user. The paper will describe the SMN Architecture, envisioned future operations concepts, opportunities for industry and international collaboration and interoperability, and technology development areas and goals.

  10. Hierarchical Communication Network Architectures for Offshore Wind Power Farms

    Directory of Open Access Journals (Sweden)

    Mohamed A. Ahmed

    2014-05-01

    Full Text Available Nowadays, large-scale wind power farms (WPFs bring new challenges for both electric systems and communication networks. Communication networks are an essential part of WPFs because they provide real-time control and monitoring of wind turbines from a remote location (local control center. However, different wind turbine applications have different requirements in terms of data volume, latency, bandwidth, QoS, etc. This paper proposes a hierarchical communication network architecture that consist of a turbine area network (TAN, farm area network (FAN, and control area network (CAN for offshore WPFs. The two types of offshore WPFs studied are small-scale WPFs close to the grid and medium-scale WPFs far from the grid. The wind turbines are modelled based on the logical nodes (LN concepts of the IEC 61400-25 standard. To keep pace with current developments in wind turbine technology, the network design takes into account the extension of the LNs for both the wind turbine foundation and meteorological measurements. The proposed hierarchical communication network is based on Switched Ethernet. Servers at the control center are used to store and process the data received from the WPF. The network architecture is modelled and evaluated via OPNET. We investigated the end-to-end (ETE delay for different WPF applications. The results are validated by comparing the amount of generated sensing data with that of received traffic at servers. The network performance is evaluated, analyzed and discussed in view of end-to-end (ETE delay for different link bandwidths.

  11. Application analysis and communication aspects for future multimedia architectures

    Science.gov (United States)

    de With, Peter H. N.; Jaspers, Egbert G. T.; Mietens, Stephan

    2004-11-01

    A principal challenge for reducing the cost of complex systems-on-chip is to pursue more generic systems for a broad range of products. For this purpose, we explore three new architectural concepts for state-of-the-art video applications. First, we discuss a reusable scalable hardware architecture employing a hierarchical communication network fitting with the natural hierarchy of the application. In a case study, we show that MPEG streaming in DTV occurs at high level, while subsystems communicate at lower levels. The second concept is a software design that scales over a number of processors to enable reuse over a range of VLSI process technologies. We explore this via an H.264 decoder implementation that scales nearly linearly over up to eight processors by applying data partitioning. The third concept is resource-scalability, which is required to satisfy real-time constraints in a system with a high amount of shared resources. An example complexity-scalable MPEG-2 encoder scales the required cycle budget with a factor of three, in parallel with a smooth degradation of quality.

  12. Communication System Architecture for Planetary Exploration

    Science.gov (United States)

    Braham, Stephen P.; Alena, Richard; Gilbaugh, Bruce; Glass, Brian; Norvig, Peter (Technical Monitor)

    2001-01-01

    Future human missions to Mars will require effective communications supporting exploration activities and scientific field data collection. Constraints on cost, size, weight and power consumption for all communications equipment make optimization of these systems very important. These information and communication systems connect people and systems together into coherent teams performing the difficult and hazardous tasks inherent in planetary exploration. The communication network supporting vehicle telemetry data, mission operations, and scientific collaboration must have excellent reliability, and flexibility.

  13. Communication Architecture Synthesis for Multi-bus SoC

    Directory of Open Access Journals (Sweden)

    Abdelkrim Zitouni

    2006-01-01

    Full Text Available In the systems on chip (SoC design, the synthesis of communication architecture constitutes the bottleneck which can affect the performances of the system. Various schemes and protocols can be necessary, just as various topologies of interconnection. To reduce the complexity of the communications refinement, we present in this study a model and a synthesis approach for multi-bus communication architecture containing centralized bridge. The automation of the arbiter synthesis step profited from a detailed attention. This stage generates a hierarchical arbiter integrating various priority arbitration modules. The proposed approach was integrated in a toolbox based environment

  14. Interprocessor communication issues in fat-tree architectures

    Energy Technology Data Exchange (ETDEWEB)

    1985-10-01

    In recent years, it has become increasingly evident that conventional computer architectures will be unable to perform, in an acceptable time frame, many of the computational functions that we would desire of them. Consequently, much research has been devoted to the concept of constructing supercomputers, which will be able to exploit the potential for parallel computation intrinsic to many large computational problems. Recently, Leiserson has proposed a multiprocessor scheme based on Leighton's tree of meshes, called a fat-tree. Conceptually, such a multiprocessor would be comprised of a set of n processing elements each situated as a leaf in a complete binary tree. Internal modes would be high speed switches which route messages being passed between processing elements, while edges between nodes would be bundles of constant bandwidth communication paths. This document addresses and defines some of the issues that effect interprocessor communication within a fat-tree multiprocessor. Specifically, it covers the following topics: (1) Addressing in a fat-tree; (2) Generation of addresses in a fat-tree; and (3) Allocation of communication resources in a fat-tree.

  15. Software Defined Radio Architecture Contributions to Next Generation Space Communications

    Science.gov (United States)

    Kacpura, Thomas J.; Eddy, Wesley M.; Smith, Carl R.; Liebetreu, John

    2015-01-01

    Space communications architecture concepts, comprising the elements of the system, the interactions among them, and the principles that govern their development, are essential factors in developing National Aeronautics and Space Administration (NASA) future exploration and science missions. Accordingly, vital architectural attributes encompass flexibility, the extensibility to insert future capabilities, and to enable evolution to provide interoperability with other current and future systems. Space communications architectures and technologies for this century must satisfy a growing set of requirements, including those for Earth sensing, collaborative observation missions, robotic scientific missions, human missions for exploration of the Moon and Mars where surface activities require supporting communications, and in-space observatories for observing the earth, as well as other star systems and the universe. An advanced, integrated, communications infrastructure will enable the reliable, multipoint, high-data-rate capabilities needed on demand to provide continuous, maximum coverage for areas of concentrated activity. Importantly, the cost/value proposition of the future architecture must be an integral part of its design; an affordable and sustainable architecture is indispensable within anticipated future budget environments. Effective architecture design informs decision makers with insight into the capabilities needed to efficiently satisfy the demanding space-communication requirements of future missions and formulate appropriate requirements. A driving requirement for the architecture is the extensibility to address new requirements and provide low-cost on-ramps for new capabilities insertion, ensuring graceful growth as new functionality and new technologies are infused into the network infrastructure. In addition to extensibility, another key architectural attribute of the space communication equipment's interoperability with other NASA communications

  16. Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

    Energy Technology Data Exchange (ETDEWEB)

    Uuspaeae, P. [VTT Energy, Espoo (Finland)

    1996-12-31

    The scope of this research is data communications for electric utilities. Demand Side Management (DSM) calls for communication between the Electric Utility and the Customer. The communication capacity needed will depend on the functions that are chosen for DSM, and on the number of customers. Some functions may be handled with one-way communications, some functions require two-way communication. Utility Communication Architecture looks for an overall view of the communications needs and communication systems in an electric utility. The objective is to define and specify suitable and compatible communications procedures within the Utility and also to outside parties. (27 refs.)

  17. Secure Architecture for m-Health Communications Using Multi-agent Approach

    Directory of Open Access Journals (Sweden)

    Mohd Fadhli Abdul Jalil

    2014-03-01

    Full Text Available In this study we propose a security architecture for mobile Health (mHealth communications. mHealth is a term used for medical-related services or communication, delivered using mobile devices such as mobile phones, tablet computers and PDAs. Communication in the health-related field often involve sensitive information (e.g., an email about a patient's illness is sent between doctors, which is transmitted over the Internet. However, although the Internet greatly facilitates the communication, it is undeniable that the threats to the Internet are becoming more prevalent. A multi-agent security architecture is presented in this study to provide a secure environment for mHealth communication. Agents are skilled in order to handle the communication processes at both sender’s and recipient’s side. This includes the security processes, which make use of cryptography protocols to secure data at both sides.

  18. Architecture and governance for communication services

    CERN Document Server

    Crespi , Noel

    2013-01-01

    Communication services are evolving at an unprecedented rate. No longer limited to interpersonal vocal communication, they now integrate functions such as address books, content sharing and messaging. The emergence of social networks - which may also include these features - is an important element of this transformation. Content services are becoming flagship services themselves, and are sometimes paired up with conversation services. The boundaries between different services are becoming less and less distinct. This book meets the need for a better understanding of communication services,

  19. Classical Process diagrams and Service oriented Architecture

    Directory of Open Access Journals (Sweden)

    Milan Mišovič

    2013-01-01

    services communicate with each other. The communication can involve either simple data or it could two or more services coordinating some activity. From the above mentioned we can pronounce a brief description of SOA. “SOA is an architectural style for consistency of business process logic and service architecture of the target software.”It is a complex of means for solution of special analysis, design, and integration of enterprise applications based on the use of enterprise services. The service solutions of the classic business process logic are, of course, based on the application of at least seven key principles of SOA (free relations, service contract, autonomy, abstraction, reusing, composition, no states. Key attributes of SOA are verbally described in (Erl, 2006. They are so important that a separate article should be devoted to their nature and formalization. On the other hand, there is also clear that each service solution of business logic should respect the principles published in SOA Manifesto, 2009, which are essentially derived from the key principles of SOA.In many publications there are given the SOA reference models usually composed of several layers (presentation layer, business process layer, composite services layer, application layer giving a meta idea of SOA implementation. Perfect knowledge of the business process logic is a necessary condition for the development of a proper service solution. The different types of business processes should be described in the necessary details and contexts.Interestingly, the SOA paradigm does not provide its own method of finding and describing business processes by giving a layered transparent business process diagram. On the other hand, the methodology provides deep understanding of not only the characteristics of services, but also their functionality and implementation of the key principles of SOA (Erl, 2006.Let us assume that the required process diagrams can be achieved by using some of the advanced

  20. Art of Film – A Way of Architectural Communication

    Directory of Open Access Journals (Sweden)

    Liliana Petrovici

    2009-01-01

    Full Text Available The art of film, the most popular art of the 20th century, can represent for architecture a means of teaching and promoting its specific values, an inspirational source and a good example of efficient and accessible cultural communication. The architecture presents many resemblances with the world of film regarding the concept and space exploring for communicating some ideas or concepts. Both film and architecture have narrative qualities, work with the world of illusions and representations and compose various elements in order to carry on certain significances. The film makers are making available the suggestive and semantic potential of architecture to render states and attitudes, to outline certain meanings or to emit opinions and comments on political, psychological and social issues.

  1. CDC WONDER: a cooperative processing architecture for public health.

    Science.gov (United States)

    Friede, A; Rosen, D H; Reid, J A

    1994-01-01

    CDC WONDER is an information management architecture designed for public health. It provides access to information and communications without the user's needing to know the location of data or communication pathways and mechanisms. CDC WONDER users have access to extractions from some 40 databases; electronic mail (e-mail); and surveillance data processing. System components include the Remote Client, the Communications Server, the Queue Managers, and Data Servers and Process Servers. The Remote Client software resides in the user's machine; other components are at the Centers for Disease Control and Prevention (CDC). The Remote Client, the Communications Server, and the Applications Server provide access to the information and functions in the Data Servers and Process Servers. The system architecture is based on cooperative processing, and components are coupled via pure message passing, using several protocols. This architecture allows flexibility in the choice of hardware and software. One system limitation is that final results from some subsystems are obtained slowly. Although designed for public health, CDC WONDER could be useful for other disciplines that need flexible, integrated information exchange.

  2. Visible light communication: Applications, architecture, standardization and research challenges

    Directory of Open Access Journals (Sweden)

    Latif Ullah Khan

    2017-05-01

    Full Text Available The Radio Frequency (RF communication suffers from interference and high latency issues. Along with this, RF communication requires a separate setup for transmission and reception of RF waves. Overcoming the above limitations, Visible Light Communication (VLC is a preferred communication technique because of its high bandwidth and immunity to interference from electromagnetic sources. The revolution in the field of solid state lighting leads to the replacement of florescent lamps by Light Emitting Diodes (LEDs which further motivates the usage of VLC. This paper presents a survey of the potential applications, architecture, modulation techniques, standardization and research challenges in VLC.

  3. PESOI: Process Embedded Service-Oriented Architecture

    Institute of Scientific and Technical Information of China (English)

    Wei-Tek Tsai; Yinong Chen; Chun Fan

    2006-01-01

    Service-Oriented Architecture (SOA) has drawn significant attention recently, and numerous architecture approaches have been proposed to represent SOA-based applications. The architecture of SOA-based applications is different from traditional software architecture, which is mainly static. The architecture of an SOA-based application is dynamic, I.e., the application can be composed at runtime using existing services, and thus the architecture is really determined at runtime, instead of design time. SOA applications have provided a new direction for software architecture study, where the architecture can be dynamically changed at runtime to meet the new application requirements. This paper proposes a Process-Embedded Service-Oriented Infrastructure to build SOA-based applications. This infrastructure embeds the entire software lifecycle management and service-oriented system engineering into the application developed on this infrastructure. Thus, the users can easily re-develop the applications during operation to meet the changing environments and requirements, through the supports provided by the embedded infrastructure.

  4. Architecture for Survivable System Processing (ASSP)

    Science.gov (United States)

    Wood, Richard J.

    1991-11-01

    The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

  5. A Multiprocessor Communication Architecture For High Speed Networks

    CERN Document Server

    S, Iyengar; Roy, A A; Sanyal, S; Singhi, N M; Feng, Wu Geng

    2010-01-01

    Over the years, communication speed of networks has increased from a few Kbps to several Mbps, as also the bandwidth demand, Communication Protocols, however have not improved to that extent. With the advent of Wavelength Division Multiplexing (WDM), it is now possible to "tune" protocols to current and future demands. The purpose of this paper is to evolve a High Speed Network architecture, which will cater to the needs of bandwidth-consuming applications, such as voice, video and high definition image transmission.

  6. Business process architectures: overview, comparison and framework

    Science.gov (United States)

    Dijkman, Remco; Vanderfeesten, Irene; Reijers, Hajo A.

    2016-02-01

    With the uptake of business process modelling in practice, the demand grows for guidelines that lead to consistent and integrated collections of process models. The notion of a business process architecture has been explicitly proposed to address this. This paper provides an overview of the prevailing approaches to design a business process architecture. Furthermore, it includes evaluations of the usability and use of the identified approaches. Finally, it presents a framework for business process architecture design that can be used to develop a concrete architecture. The use and usability were evaluated in two ways. First, a survey was conducted among 39 practitioners, in which the opinion of the practitioners on the use and usefulness of the approaches was evaluated. Second, four case studies were conducted, in which process architectures from practice were analysed to determine the approaches or elements of approaches that were used in their design. Both evaluations showed that practitioners have a preference for using approaches that are based on reference models and approaches that are based on the identification of business functions or business objects. At the same time, the evaluations showed that practitioners use these approaches in combination, rather than selecting a single approach.

  7. Comparison of Communication Architectures for Spacecraft Modular Avionics Systems

    Science.gov (United States)

    Gwaltney, D. A.; Briscoe, J. M.

    2006-01-01

    This document is a survey of publicly available information concerning serial communication architectures used, or proposed to be used, in aeronautic and aerospace applications. It focuses on serial communication architectures that are suitable for low-latency or real-time communication between physically distributed nodes in a system. Candidates for the study have either extensive deployment in the field, or appear to be viable for near-term deployment. Eleven different serial communication architectures are considered, and a brief description of each is given with the salient features summarized in a table in appendix A. This survey is a product of the Propulsion High Impact Avionics Technology (PHIAT) Project at NASA Marshall Space Flight Center (MSFC). PHIAT was originally funded under the Next Generation Launch Technology (NGLT) Program to develop avionics technologies for control of next generation reusable rocket engines. After the announcement of the Space Exploration Initiative, the scope of the project was expanded to include vehicle systems control for human and robotics missions. As such, a section is included presenting the rationale used for selection of a time-triggered architecture for implementation of the avionics demonstration hardware developed by the project team

  8. System architecture of communication infrastructures for PPDR organisations

    Science.gov (United States)

    Müller, Wilmuth

    2017-04-01

    The growing number of events affecting public safety and security (PS and S) on a regional scale with potential to grow up to large scale cross border disasters puts an increased pressure on organizations responsible for PS and S. In order to respond timely and in an adequate manner to such events Public Protection and Disaster Relief (PPDR) organizations need to cooperate, align their procedures and activities, share the needed information and be interoperable. Existing PPDR/PMR technologies do not provide broadband capability, which is a major limitation in supporting new services hence new information flows and currently they have no successor. There is also no known standard that addresses interoperability of these technologies. The paper at hands provides an approach to tackle the above mentioned aspects by defining an Enterprise Architecture (EA) of PPDR organizations and a System Architecture of next generation PPDR communication networks for a variety of applications and services on broadband networks, including the ability of inter-system, inter-agency and cross-border operations. The Open Safety and Security Architecture Framework (OSSAF) provides a framework and approach to coordinate the perspectives of different types of stakeholders within a PS and S organization. It aims at bridging the silos in the chain of commands and on leveraging interoperability between PPDR organizations. The framework incorporates concepts of several mature enterprise architecture frameworks including the NATO Architecture Framework (NAF). However, OSSAF is not providing details on how NAF should be used for describing the OSSAF perspectives and views. In this contribution a mapping of the NAF elements to the OSSAF views is provided. Based on this mapping, an EA of PPDR organizations with a focus on communication infrastructure related capabilities is presented. Following the capability modeling, a system architecture for secure and interoperable communication infrastructures

  9. CCPA: Component-based communication protocol architecture for embedded systems

    Institute of Scientific and Technical Information of China (English)

    DAI Hong-jun; CHEN Tian-zhou; CHEN Chun

    2005-01-01

    For increased and various communication requirements of modem applications on embedded systems, general purpose protocol stacks and protocol models are not efficient because they are fixed to execute in the static mode. We present the Component-Based Communication Protocol Architecture (CCPA) to make communication dynamic and configurable. It can develop, test and store the customized components for flexible reuse. The protocols are implemented by component assembly and support by configurable environments. This leads to smaller memory, more flexibility, more reconfiguration ability, better concurrency, and multiple data channel support.

  10. Organizational communication process

    Directory of Open Access Journals (Sweden)

    Kenan Spaho

    2012-12-01

    Full Text Available Managers spend majority of their time communicating in several forms: meeting, face-to –face dis- cussion, letters, emails etc. Also more and more employees realize that communication is a very im- portant part of their work because a lot of their work activities are based on teamwork among workers in different functional groups. This is the reason why communication has become more important in companies. The experience shows that there are significant differences in manners of communication and that it appears to be a very important factor which makes some organizations more successful than others. Communication is the most important for managers because research shows that the spent long period in work time in communication.

  11. Organizational communication process

    OpenAIRE

    Kenan Spaho

    2012-01-01

    Managers spend majority of their time communicating in several forms: meeting, face-to –face dis- cussion, letters, emails etc. Also more and more employees realize that communication is a very im- portant part of their work because a lot of their work activities are based on teamwork among workers in different functional groups. This is the reason why communication has become more important in companies. The experience shows that there are significant differences in manners of ...

  12. An Analysis Architecture for Communications in Multi-agent Systems

    Directory of Open Access Journals (Sweden)

    Celia Gutiérrez

    2013-03-01

    Full Text Available Evaluation tools are significant from the Agent Oriented Software Engineering (AOSE point of view. Defective designs of communications in Multi-agent Systems (MAS may overload one or several agents, causing a bullying effect on them. Bullying communications have avoidable consequences, as high response times and low quality of service (QoS. Architectures that perform evaluation functionality must include features to measure the bullying activity and QoS, but it is also recommendable that they have reusability and scalability features. Evaluation tools with these features can be applied to a wide range of MAS, while minimizing designer’s effort. This work describes the design of an architecture for communication analysis, and its evolution to a modular version, that can be applied to different types of MAS. Experimentation of both versions shows differences between its executions.

  13. Augmenting painted architectures for communicating cultural heritage

    Directory of Open Access Journals (Sweden)

    Alberto Sdegno

    2015-07-01

    Full Text Available The paper presents a research under development at the University of Trieste to analyze a painted architecture by Paolo Veronese and to present the results using AR systems (Augmented Reality Systems. The canvas was painted in 1573 and it is now at the Gallerie dell’Accademia Museum in Venice. The aim of the research was to transform a two-dimensional work of art in a three dimensional one, allowing all the visitors of a museum to enter the space of the representation and perceive it in a more direct way. After the geometrical analysis of the picture, we started the digital restitution of the perspective references and proceed to model the virtual scene using Boolean primitives and applying all the textures to render the scene in a very realistic way. The further step was to convert the model into a dynamic form with AR algorithms and associate it with spatial references to allow users to do a virtual experience of it.

  14. Communication processes and modern society

    OpenAIRE

    Kornienko Olga Yu.; Naumenko Tamara V.; Suvorova Olga S.

    2016-01-01

    The article targets specific features of modern economic and communication processes, the ones being most obviously revealed in such integral spheres of modern environment as social relations and service sector, as well as their connection with communicative space of today’s social media. It focuses on ways to assess the role and place of mass-communication processes in optimization and development of social processes. It is conducted to ascertain the influence of major actors on modern socie...

  15. Study of heterogeneous and reconfigurable architectures in the communication domain

    Directory of Open Access Journals (Sweden)

    H. T. Feldkaemper

    2003-01-01

    Full Text Available One of the most challenging design issues for next generations of (mobile communication systems is fulfilling the computational demands while finding an appropriate trade-off between flexibility and implementation aspects, especially power consumption. Flexibility of modern architectures is desirable, e.g. concerning adaptation to new standards and reduction of time-to-market of a new product. Typical target architectures for future communication systems include embedded FPGAs, dedicated macros as well as programmable digital signal and control oriented processor cores as each of these has its specific advantages. These will be integrated as a System-on-Chip (SoC. For such a heterogeneous architecture a design space exploration and an appropriate partitioning plays a crucial role. On the exemplary vehicle of a Viterbi decoder as frequently used in communication systems we show which costs in terms of ATE complexity arise implementing typical components on different types of architecture blocks. A factor of about seven orders of magnitude spans between a physically optimised implementation and an implementation on a programmable DSP kernel. An implementation on an embedded FPGA kernel is in between these two representing an attractive compromise with high flexibility and low power consumption. Extending this comparison to further components, it is shown quantitatively that the cost ratio between different implementation alternatives is closely related to the operation to be performed. This information is essential for the appropriate partitioning of heterogeneous systems.

  16. Study of heterogeneous and reconfigurable architectures in the communication domain

    Science.gov (United States)

    Feldkaemper, H. T.; Blume, H.; Noll, T. G.

    2003-05-01

    One of the most challenging design issues for next generations of (mobile) communication systems is fulfilling the computational demands while finding an appropriate trade-off between flexibility and implementation aspects, especially power consumption. Flexibility of modern architectures is desirable, e.g. concerning adaptation to new standards and reduction of time-to-market of a new product. Typical target architectures for future communication systems include embedded FPGAs, dedicated macros as well as programmable digital signal and control oriented processor cores as each of these has its specific advantages. These will be integrated as a System-on-Chip (SoC). For such a heterogeneous architecture a design space exploration and an appropriate partitioning plays a crucial role. On the exemplary vehicle of a Viterbi decoder as frequently used in communication systems we show which costs in terms of ATE complexity arise implementing typical components on different types of architecture blocks. A factor of about seven orders of magnitude spans between a physically optimised implementation and an implementation on a programmable DSP kernel. An implementation on an embedded FPGA kernel is in between these two representing an attractive compromise with high flexibility and low power consumption. Extending this comparison to further components, it is shown quantitatively that the cost ratio between different implementation alternatives is closely related to the operation to be performed. This information is essential for the appropriate partitioning of heterogeneous systems.

  17. Process Models for Security Architectures

    Directory of Open Access Journals (Sweden)

    Floarea NASTASE

    2006-01-01

    Full Text Available This paper presents a model for an integrated security system, which can be implemented in any organization. It is based on security-specific standards and taxonomies as ISO 7498-2 and Common Criteria. The functionalities are derived from the classes proposed in the Common Criteria document. In the paper we present the process model for each functionality and also we focus on the specific components.

  18. Secure Inter-Process Communication

    Directory of Open Access Journals (Sweden)

    Valentin Radulescu

    2013-12-01

    Full Text Available This article reveals the necessity in modern distributed systems for authentication of a process running in a distributed system and to provide a secure channel for inter-process communication in which both the client authenticates to the server and the server authenticates to the client. The distributed system is a client-server system based on ENEA LINX inter-process communication framework. Enea LINX is a Linux open source project which allows processes to exchange information between several media channels: shared memory (local process communication, Ethernet (local network inter process communication, TCP/IP (inter process communication through Internet in which nodes are communicating regardless of the underlying media. Because ENEA LINX offers no security mechanism it appears the need for securing the communicating over LINX protocol. Process authentication disables the need for personal authentication of the user and also prevents an attacker from starting a process which will harm the entire system. Besides authentication, using public key combined with symmetric key technologies the secure inter-process communication system must provide integrity and confidentiality.

  19. An Architecture for High Data Rate Very Low Frequency Communication

    Directory of Open Access Journals (Sweden)

    Arun Kumar

    2013-01-01

    Full Text Available Very low frequency (VLF communication is used for long range shore-to-ship broadcasting applications. This paper proposes an architecture for high data rate VLF communication using Gaussian minimum shift keying (GMSK modulation and low delay parity check (LDPC channel coding. Non-data aided techniques are designed and used for carrier phase synchronization, symbol timing recovery, and LDPC code frame synchronization. These require the estimation of the operative Eb/N0 for which a kurtosis based algorithm is used. Also, a method for modeling the probability density function of the received signal under the bit condition is presented in this regard. The modeling of atmospheric radio noise (ARN that corrupts VLF signals is described and an algorithm for signal enhancement in the presence of ARN in given. The BER performance of the communication system is evaluated for bit rates of 400 bps, 600 bps, and 800 bps for communication bandwidth of ~200 Hz.

  20. Processes of Mass Communication.

    Science.gov (United States)

    Channey, David

    This sociological treatment of mass communications analysis first discusses the theories of audience behavior, then turns to the organization of media production, and closes with a study of performance. The book covers audience needs and gratifications, the history of British press and broadcasting results of systems of media distribution, the…

  1. Delay Optimized Architecture for On-Chip Communication

    Institute of Scientific and Technical Information of China (English)

    Sheraz Anjum; Jie Chen; Pei-Pei Yue; Jian Liu

    2009-01-01

    Networks-on-chip (NoC), a new system on chip (SoC) paradigm, has become a great focus of research by many groups during the last few years. Among all the NoC architectures that have been proposed until now, 2D-Mesh has proved to be the best architecture for implementation due to its regular and simple intercon- nection structure. In this paper, we propose a new interconnect architecture called 2D-diagonal mesh (2DDgl-Mesh) for on-chip communication. The 2DDgl- Mesh is almost similar to traditional 2D-Mesh in aspects of cost, area, and implementation, but it can outperform the later in delay. The both architectures are compared by using NS-2 (a network simulator) and CINSIM (a component based interconnection simulator) under the same traffic models and parametric conditions. The results of comparison show that under the proposed architecture, the packets can almost always be routed to their destinations in less time. In addition, our archi- tecture can sometimes perform better than 2D-Mesh in drop ratio for special fixed traffic models.

  2. Communication architecture system for fiber positioning of DESI spectrograph

    Science.gov (United States)

    Kaci, Karim; Glez-de-Rivera, Guillermo; Lopez-Colino, Fernando; Martinez-Garcia, M. Sofia; Masa, Jose L.; Garrido, Javier; Sanchez, Justo; Prada, Francisco

    2016-07-01

    This paper presents a design proposal for controlling the five thousand fiber positioners within the focal plate of the DESI instrument. Each of these positioners is a robot which allows positioning its optic fiber with a resolution within the range of few microns. The high number and density of these robots poses a challenge for handling the communication from a central control device to each of these five thousand. Furthermore, an additional restriction applies as the required time to communicate to every robot of its position must be smaller than a second. Additionally. a low energy consumption profile is also desired. Both wireless and wired communication protocols have been evaluated, proposing single-technology-based architectures and hybrid ones (a combination of them). Among the wireless solutions, ZigBee and CyFi have been considered. Using simulation tools these wireless protocols have been discarded as they do not allow an efficient communication. The studied wired protocols comprise I2C, CAN and Ethernet. The best solution found is a hybrid multilayer architecture combining both Ethernet and I2C. A 100 Mbps Ethernet based network is used to communicate the central control unit with ten management boards. Each of these boards is a low-cost, low-power embedded device that manages a thirty six degrees sector of the sensing plate. Each of these boards receives the positioning data for five hundred robots and communicate with each one through a fast mode plus I2C bus. This proposal allows to communicate the positioning information for all five thousand robots in 350 ms total.

  3. Context-aware adaptation for group communication support applications with dynamic architecture

    CERN Document Server

    Rodriguez, Ismael Bouassida; Chassot, Christophe; Jmaiel, Mohamed

    2008-01-01

    In this paper, we propose a refinement-based adaptation approach for the architecture of distributed group communication support applications. Unlike most of previous works, our approach reaches implementable, context-aware and dynamically adaptable architectures. To model the context, we manage simultaneously four parameters that influence Qos provided by the application. These parameters are: the available bandwidth, the exchanged data communication priority, the energy level and the available memory for processing. These parameters make it possible to refine the choice between the various architectural configurations when passing from a given abstraction level to the lower level which implements it. Our approach allows the importance degree associated with each parameter to be adapted dynamically. To implement adaptation, we switch between the various configurations of the same level, and we modify the state of the entities of a given configuration when necessary. We adopt the direct and mediated Producer-...

  4. Fault tolerant onboard packet switch architecture for communication satellites: Shared memory per beam approach

    Science.gov (United States)

    Shalkhauser, Mary JO; Quintana, Jorge A.; Soni, Nitin J.

    1994-01-01

    The NASA Lewis Research Center is developing a multichannel communication signal processing satellite (MCSPS) system which will provide low data rate, direct to user, commercial communications services. The focus of current space segment developments is a flexible, high-throughput, fault tolerant onboard information switching processor. This information switching processor (ISP) is a destination-directed packet switch which performs both space and time switching to route user information among numerous user ground terminals. Through both industry study contracts and in-house investigations, several packet switching architectures were examined. A contention-free approach, the shared memory per beam architecture, was selected for implementation. The shared memory per beam architecture, fault tolerance insertion, implementation, and demonstration plans are described.

  5. Development of a low-latency scalar communication routine on message-passing architectures

    Energy Technology Data Exchange (ETDEWEB)

    Pai, R.

    1994-01-11

    One of the most significant advances in computer systems over the past decade is parallel processing. To be scalable to a large number of processing nodes and to be able to support multiple levels and forms of parallelism and its flexible use, new parallel machines have to be multicomputer architectures that have general networking support and extremely low internode communication latencies. The performance of a program when ported to a parallel machine is limited mainly by the internode communication latencies of the machine. Therefore, the best parallel applications are those that seldom require communications which must be routed through the nodes. Thus the ratio of computation time to that of communication time is what determines, to a large extent, the performance metrics of an algorithm. The cost of synchronization and load imbalance appear secondary to that of the time required for internode communication and I/O, for communication intensive applications. This thesis is organized in chapters. The first chapter deals with the communication strategies in various message-passing computers. A taxonomy of inter-node communication strategies is presented in the second chapter and a comparison of the strategies in some existing machines is done. The implementation of communication in nCUBE Vertex O.S is explained in the third chapter. The fourth chapter deals with the communication routines in the Vertex O.S, and the last chapter explains the development and implementation of the scalar communication call. Finally some conclusions are presented.

  6. Development of a low-latency scalar communication routine on message-passing architectures

    Energy Technology Data Exchange (ETDEWEB)

    Pai, Rekha [Iowa State Univ., Ames, IA (United States)

    1994-01-11

    One of the most significant advances in computer systems over the past decade is parallel processing. To be scalable to a large number of processing nodes and to be able to support multiple levels and forms of parallelism and its flexible use, new parallel machines have to be multicomputer architectures that have general networking support and extremely low internode communication latencies. The performance of a program when ported to a parallel machine is limited mainly by the internode communication latencies of the machine. Therefore, the best parallel applications are those that seldom require communications which must be routed through the nodes. Thus the ratio of computation time to that of communication time is what determines, to a large extent, the performance metrics of an algorithm. The cost of synchronization and load imbalance appear secondary to that of the time required for internode communication and I/O, for communication intensive applications. This thesis is organized in chapters. The first chapter deals with the communication strategies in various message-passing computers. A taxonomy of inter-node communication strategies is presented in the second chapter and a comparison of the strategies in some existing machines is done. The implementation of communication in nCUBE Vertex O.S is explained in the third chapter. The fourth chapter deals with the communication routines in the Vertex O.S, and the last chapter explains the development and implementation of the scalar communication call. Finally some conclusions are presented.

  7. Machine-to-machine communications architectures, technology, standards, and applications

    CERN Document Server

    Misic, Vojislav B

    2014-01-01

    With the number of machine-to-machine (M2M)-enabled devices projected to reach 20 to 50 billion by 2020, there is a critical need to understand the demands imposed by such systems. Machine-to-Machine Communications: Architectures, Technology, Standards, and Applications offers rigorous treatment of the many facets of M2M communication, including its integration with current technology.Presenting the work of a different group of international experts in each chapter, the book begins by supplying an overview of M2M technology. It considers proposed standards, cutting-edge applications, architectures, and traffic modeling and includes case studies that highlight the differences between traditional and M2M communications technology.Details a practical scheme for the forward error correction code designInvestigates the effectiveness of the IEEE 802.15.4 low data rate wireless personal area network standard for use in M2M communicationsIdentifies algorithms that will ensure functionality, performance, reliability, ...

  8. Description and Simulation of a Fast Packet Switch Architecture for Communication Satellites

    Science.gov (United States)

    Quintana, Jorge A.; Lizanich, Paul J.

    1995-01-01

    The NASA Lewis Research Center has been developing the architecture for a multichannel communications signal processing satellite (MCSPS) as part of a flexible, low-cost meshed-VSAT (very small aperture terminal) network. The MCSPS architecture is based on a multifrequency, time-division-multiple-access (MF-TDMA) uplink and a time-division multiplex (TDM) downlink. There are eight uplink MF-TDMA beams, and eight downlink TDM beams, with eight downlink dwells per beam. The information-switching processor, which decodes, stores, and transmits each packet of user data to the appropriate downlink dwell onboard the satellite, has been fully described by using VHSIC (Very High Speed Integrated-Circuit) Hardware Description Language (VHDL). This VHDL code, which was developed in-house to simulate the information switching processor, showed that the architecture is both feasible and viable. This paper describes a shared-memory-per-beam architecture, its VHDL implementation, and the simulation efforts.

  9. A hierarchical communication architecture for oceanic surveillance applications.

    Science.gov (United States)

    Macias, Elsa; Suarez, Alvaro; Chiti, Francesco; Sacco, Andrea; Fantacci, Romano

    2011-01-01

    The interest in monitoring applications using underwater sensor networks has been growing in recent years. The severe communication restrictions imposed by underwater channels make that efficient monitoring be a challenging task. Though a lot of research has been conducted on underwater sensor networks, there are only few concrete applications to a real-world case study. In this work, hence, we propose a general three tier architecture leveraging low cost wireless technologies for acoustic communications between underwater sensors and standard technologies, Zigbee and Wireless Fidelity (WiFi), for water surface communications. We have selected a suitable Medium Access Control (MAC) layer, after making a comparison with some common MAC protocols. Thus the performance of the overall system in terms of Signals Discarding Rate (SDR), signalling delay at the surface gateway as well as the percentage of true detection have been evaluated by simulation, pointing out good results which give evidence in applicability's favour.

  10. A Hierarchical Communication Architecture for Oceanic Surveillance Applications

    Directory of Open Access Journals (Sweden)

    Romano Fantacci

    2011-11-01

    Full Text Available The interest in monitoring applications using underwater sensor networks has been growing in recent years. The severe communication restrictions imposed by underwater channels make that efficient monitoring be a challenging task. Though a lot of research has been conducted on underwater sensor networks, there are only few concrete applications to a real-world case study. In this work, hence, we propose a general three tier architecture leveraging low cost wireless technologies for acoustic communications between underwater sensors and standard technologies, Zigbee and Wireless Fidelity (WiFi, for water surface communications. We have selected a suitable Medium Access Control (MAC layer, after making a comparison with some common MAC protocols. Thus the performance of the overall system in terms of Signals Discarding Rate (SDR, signalling delay at the surface gateway as well as the percentage of true detection have been evaluated by simulation, pointing out good results which give evidence in applicability’s favour.

  11. A Hierarchical Communication Architecture for Oceanic Surveillance Applications

    Science.gov (United States)

    Macias, Elsa; Suarez, Alvaro; Chiti, Francesco; Sacco, Andrea; Fantacci, Romano

    2011-01-01

    The interest in monitoring applications using underwater sensor networks has been growing in recent years. The severe communication restrictions imposed by underwater channels make that efficient monitoring be a challenging task. Though a lot of research has been conducted on underwater sensor networks, there are only few concrete applications to a real-world case study. In this work, hence, we propose a general three tier architecture leveraging low cost wireless technologies for acoustic communications between underwater sensors and standard technologies, Zigbee and Wireless Fidelity (WiFi), for water surface communications. We have selected a suitable Medium Access Control (MAC) layer, after making a comparison with some common MAC protocols. Thus the performance of the overall system in terms of Signals Discarding Rate (SDR), signalling delay at the surface gateway as well as the percentage of true detection have been evaluated by simulation, pointing out good results which give evidence in applicability’s favour. PMID:22247669

  12. Reversible Communicating Processes

    Directory of Open Access Journals (Sweden)

    Geoffrey Brown

    2016-02-01

    Full Text Available Reversible distributed programs have the ability to abort unproductive computation paths and backtrack, while unwinding communication that occurred in the aborted paths. While it is natural to assume that reversibility implies full state recovery (as with traditional roll-back recovery protocols, an interesting alternative is to separate backtracking from local state recovery. For example, such a model could be used to create complex transactions out of nested compensable transactions where a programmer-supplied compensation defines the work required to "unwind" a transaction. Reversible distributed computing has received considerable theoretical attention, but little reduction to practice; the few published implementations of languages supporting reversibility depend upon a high degree of central control. The objective of this paper is to demonstrate that a practical reversible distributed language can be efficiently implemented in a fully distributed manner. We discuss such a language, supporting CSP-style synchronous communication, embedded in Scala. While this language provided the motivation for the work described in this paper, our focus is upon the distributed implementation. In particular, we demonstrate that a "high-level" semantic model can be implemented using a simple point-to-point protocol.

  13. Communication Network Architectures for Smart-Wind Power Farms

    Directory of Open Access Journals (Sweden)

    Mohamed A. Ahmed

    2014-06-01

    Full Text Available Developments in the wind power industry have enabled a new generation of wind turbines with longer blades, taller towers, higher efficiency, and lower maintenance costs due to the maturity of related technologies. Nevertheless, wind turbines are still blind machines because the control center is responsible for managing and controlling individual wind turbines that are turned on or off according to demand for electricity. In this paper, we propose a communication network architecture for smart-wind power farms (Smart-WPFs. The proposed architecture is designed for wind turbines to communicate directly and share sensing data in order to maximize power generation, WPF availability, and turbine efficiency. We also designed a sensor data frame structure to carry sensing data from different wind turbine parts such as the rotor, transformer, nacelle, etc. The data frame includes a logical node ID (LNID, sensor node ID (SNID, sensor type (ST, and sensor data based on the International Electrotechnical Commission (IEC 61400-25 standard. We present an analytical model that describes upstream traffic between the wind turbines and the control center. Using a queueing theory approach, the upstream traffic is evaluated in view of bandwidth utilization and average queuing delay. The performance of the proposed network architectures are evaluated by using analytical and simulation models.

  14. Process algebra for synchronous communication

    NARCIS (Netherlands)

    Bergstra, J.A.; Klop, J.W.

    1984-01-01

    Within the context of an algebraic theory of processes, an equational specification of process cooperation is provided. Four cases are considered: free merge or interleaving, merging with communication, merging with mutual exclusion of tight regions, and synchronous process cooperation. The rewrite

  15. Minimizing the Risk of Architectural Decay by using Architecture-Centric Evolution Process

    CERN Document Server

    Farid, Humaira; Iqbal, M Aqeel

    2011-01-01

    Software systems endure many noteworthy changes throughout their life-cycle in order to follow the evolution of the problem domains. Generally, the software system architecture cannot follow the rapid evolution of a problem domain which results in the discrepancies between the implemented and designed architecture. Software architecture illustrates a system's structure and global properties and consequently determines not only how the system should be constructed but also leads its evolution. Architecture plays an important role to ensure that a system satisfies its business and mission goals during implementation and evolution. However, the capabilities of the designed architecture may possibly be lost when the implementation does not conform to the designed architecture. Such a loss of consistency causes the risk of architectural decay. The architectural decay can be avoided if architectural changes are made as early as possible. The paper presents the Process Model for Architecture-Centric Evolution which ...

  16. Algorithm-Architecture Matching for Signal and Image Processing

    CERN Document Server

    Gogniat, Guy; Morawiec, Adam; Erdogan, Ahmet

    2011-01-01

    Advances in signal and image processing together with increasing computing power are bringing mobile technology closer to applications in a variety of domains like automotive, health, telecommunication, multimedia, entertainment and many others. The development of these leading applications, involving a large diversity of algorithms (e.g. signal, image, video, 3D, communication, cryptography) is classically divided into three consecutive steps: a theoretical study of the algorithms, a study of the target architecture, and finally the implementation. Such a linear design flow is reaching its li

  17. System Architecture and Mobility Management for Mobile Immersive Communications

    Directory of Open Access Journals (Sweden)

    Mehran Dowlatshahi

    2007-01-01

    Full Text Available We propose a system design for delivery of immersive communications to mobile wireless devices based on a distributed proxy model. It is demonstrated that this architecture addresses key technical challenges for the delivery of these services, that is, constraints on link capacity and power consumption in mobile devices. However, additional complexity is introduced with respect to application layer mobility management. The paper proposes three possible methods for updating proxy assignments in response to mobility management and compares the performance of these methods.

  18. Reconfigurable Transceiver and Software-Defined Radio Architecture and Technology Evaluated for NASA Space Communications

    Science.gov (United States)

    Reinhart, Richard C.; Kacpura, Thomas J.

    2004-01-01

    The NASA Glenn Research Center is investigating the development and suitability of a software-based open-architecture for space-based reconfigurable transceivers (RTs) and software-defined radios (SDRs). The main objectives of this project are to enable advanced operations and reduce mission costs. SDRs are becoming more common because of the capabilities of reconfigurable digital signal processing technologies such as field programmable gate arrays and digital signal processors, which place radio functions in firmware and software that were traditionally performed with analog hardware components. Features of interest of this communications architecture include nonproprietary open standards and application programming interfaces to enable software reuse and portability, independent hardware and software development, and hardware and software functional separation. The goals for RT and SDR technologies for NASA space missions include prelaunch and on-orbit frequency and waveform reconfigurability and programmability, high data rate capability, and overall communications and processing flexibility. These operational advances over current state-of-art transceivers will be provided to reduce the power, mass, and cost of RTs and SDRs for space communications. The open architecture for NASA communications will support existing (legacy) communications needs and capabilities while providing a path to more capable, advanced waveform development and mission concepts (e.g., ad hoc constellations with self-healing networks and high-rate science data return). A study was completed to assess the state of the art in RT architectures, implementations, and technologies. In-house researchers conducted literature searches and analysis, interviewed Government and industry contacts, and solicited information and white papers from industry on space-qualifiable RTs and SDRs and their associated technologies for space-based NASA applications. The white papers were evaluated, compiled, and

  19. On ambiguity. Its locus in the architecture of Language and its origin in efficient communication

    CERN Document Server

    Fortuny, Jordi

    2011-01-01

    Ambiguity is an indisputable and ubiquitous feature of linguistic products. In this article we investigate both the locus of ambiguity in the architecture of Language and the origin of ambiguity in natural communication systems. We locate ambiguity at the \\textit{externalization branch} of Language and we study the emergence of ambiguity in communication through the concept of logical irreversibility and within the framework of Shannon's information theory. This leads us to a precise and general expression of the intuition behind Zipf's vocabulary balance in terms of a symmetry equation between the complexities of the coding and the decoding processes that imposes an unavoidable amount of logical uncertainty in natural communication. Accordingly, the emergence of irreversible computations is required if the complexities of the coding and the decoding processes are balanced in a symmetric scenario, which means that the emergence of ambiguous codes is a necessary condition for natural communication to succeed.

  20. Modeling interdependencies between business and communication processes in hospitals.

    Science.gov (United States)

    Brigl, Birgit; Wendt, Thomas; Winter, Alfred

    2003-01-01

    The optimization and redesign of business processes in hospitals is an important challenge for the hospital information management who has to design and implement a suitable HIS architecture. Nevertheless, there are no tools available specializing in modeling information-driven business processes and the consequences on the communication between information processing, tools. Therefore, we will present an approach which facilitates the representation and analysis of business processes and resulting communication processes between application components and their interdependencies. This approach aims not only to visualize those processes, but to also to evaluate if there are weaknesses concerning the information processing infrastructure which hinder the smooth implementation of the business processes.

  1. Mesh Network Architecture for Enabling Inter-Spacecraft Communication

    Science.gov (United States)

    Becker, Christopher; Merrill, Garrick

    2017-01-01

    To enable communication between spacecraft operating in a formation or small constellation, a mesh network architecture was developed and tested using a time division multiple access (TDMA) communication scheme. The network is designed to allow for the exchange of telemetry and other data between spacecraft to enable collaboration between small spacecraft. The system uses a peer-to-peer topology with no central router, so that it does not have a single point of failure. The mesh network is dynamically configurable to allow for addition and subtraction of new spacecraft into the communication network. Flight testing was performed using an unmanned aerial system (UAS) formation acting as a spacecraft analogue and providing a stressing environment to prove mesh network performance. The mesh network was primarily devised to provide low latency, high frequency communication but is flexible and can also be configured to provide higher bandwidth for applications desiring high data throughput. The network includes a relay functionality that extends the maximum range between spacecraft in the network by relaying data from node to node. The mesh network control is implemented completely in software making it hardware agnostic, thereby allowing it to function with a wide variety of existing radios and computing platforms..

  2. An Architecture for High Data Rate Very Low Frequency Communication

    Directory of Open Access Journals (Sweden)

    Arun Kumar

    2013-01-01

    Full Text Available Very low frequency (VLF communication is used for long range shore-to-ship broadcasting applications. This paper proposes an architecture for high data rate VLF communication using Gaussian minimum shift keying (GMSK modulation and low delay parity check (LDPC channel coding. Non-data aided techniques are designed and used for carrier phase synchronization, symbol timing recovery, and LDPC code frame synchronization. These require the estimation of the operative Eb/N0 for which a kurtosis based algorithm is used. Also, a method for modeling the probability density function of the received signal under the bit condition is presented in this regard. The modeling of atmospheric radio noise (ARN that corrupts VLF signals is described and an algorithm for signal enhancement in the presence of ARN in given. The BER performance of the communication system is evaluated for bit rates of 400 bps, 600 bps, and 800 bps for communication bandwidth of ~200 Hz.Defence Science Journal, 2013, 63(1, pp.25-33, DOI:http://dx.doi.org/10.14429/dsj.63.3760

  3. Structural processing for wireless communications

    CERN Document Server

    Lu, Jianhua; Ge, Ning

    2015-01-01

    This brief presents an alternative viewpoint on processing technology for wireless communications based on recent research advances. As a lever in emerging processing technology, the structure perspective addresses the complexity and uncertainty issues found in current wireless applications. Likewise, this brief aims at providing a new prospective to the development of communication technology and information science, while stimulating new theories and technologies for wireless systems with ever-increasing complexity. Readers of this brief may range from graduate students to researchers in related fields.

  4. Space Mobile Network: A Near Earth Communications and Navigation Architecture

    Science.gov (United States)

    Israel, David J.; Heckler, Gregory W.; Menrad, Robert J.

    2016-01-01

    This paper shares key findings of NASA's Earth Regime Network Evolution Study (ERNESt) team resulting from its 18-month effort to define a wholly new architecture-level paradigm for the exploitation of space by civil space and commercial sector organizations. Since the launch of Sputnik in October 1957 spaceflight missions have remained highly scripted activities from launch through disposal. The utilization of computer technology has enabled dramatic increases in mission complexity; but, the underlying premise that the diverse actions necessary to meet mission goals requires minute-by-minute scripting, defined weeks in advance of execution, for the life of the mission has remained. This archetype was appropriate for a "new frontier" but now risks overtly constraining the potential market-based opportunities for the innovation considered necessary to efficiently address the complexities associated with meeting communications and navigation requirements projected to be characteristics of the next era of space exploration: a growing number of missions in simultaneous execution, increased variance of mission types and growth in location/orbital regime diversity. The resulting ERNESt architectural cornerstone - the Space Mobile Network (SMN) - was envisioned as critical to creating an environment essential to meeting these future challenges in political, programmatic, technological and budgetary terms. The SMN incorporates technologies such as: Disruption Tolerant Networking (DTN) and optical communications, as well as new operations concepts such as User Initiated Services (UIS) to provide user services analogous to today's terrestrial mobile network user. Results developed in collaboration with NASA's Space Communications and Navigation (SCaN) Division and field centers are reported on. Findings have been validated via briefings to external focus groups and initial ground-based demonstrations. The SMN opens new niches for exploitation by the marketplace of mission

  5. Architectural Design for a Mars Communications and Navigation Orbital Infrastructure

    Science.gov (United States)

    Ceasrone R. J.; Hastrup, R. C.; Bell, D. J.; Roncoli, R. B.; Nelson, K.

    1999-01-01

    The planet Mars has become the focus of an intensive series of missions that span decades of time, a wide array of international agencies and an evolution from robotics to humans. The number of missions to Mars at any one time, and over a period of time, is unprecedented in the annals of space exploration. To meet the operational needs of this exploratory fleet will require the implementation of new architectural concepts for communications and navigation. To this end, NASA's Jet Propulsion Laboratory has begun to define and develop a Mars communications and navigation orbital infrastructure. This architecture will make extensive use of assets at Mars, as well as use of traditional Earth-based assets, such as the Deep Space Network, DSN. Indeed, the total system can be thought of as an extension of DSN nodes and services to the Mars in-situ region. The concept has been likened to the beginnings of an interplanetary Internet that will bring the exploration of Mars right into our living rooms. The paper will begin with a high-level overview of the concept for the Mars communications and navigation infrastructure. Next, the mission requirements will be presented. These will include the relatively near-term needs of robotic landers, rovers, ascent vehicles, balloons, airplanes, and possibly orbiting, arriving and departing spacecraft. Requirements envisioned for the human exploration of Mars will also be described. The important Mars orbit design trades on telecommunications and navigation capabilities will be summarized, and the baseline infrastructure will be described. A roadmap of NASA's plan to evolve this infrastructure over time will be shown. Finally, launch considerations and delivery to Mars will be briefly treated.

  6. A collaboration process for enterprise architecture creation

    NARCIS (Netherlands)

    Nakakawa, Agnes

    2012-01-01

    Designing an enterprise architecture involves architect-specific tasks (those that are executed by enterprise architects) and collaboration dependent tasks (those whose proper execution requires enterprise architects to collaborate with organizational stakeholders). Enterprise architecture framework

  7. A collaboration process for enterprise architecture creation

    NARCIS (Netherlands)

    Nakakawa, Agnes

    2012-01-01

    Designing an enterprise architecture involves architect-specific tasks (those that are executed by enterprise architects) and collaboration dependent tasks (those whose proper execution requires enterprise architects to collaborate with organizational stakeholders). Enterprise architecture

  8. Mapping Signal Processing Kernels to Tiled Architectures

    Science.gov (United States)

    2007-11-02

    attractive alternatives to monolithic computer architecture designs because they allow a larger design to be built from smaller modules and limit the...Computer Architectures. ACM Transactions on Computer Systems, 2(4):289–308, November 1984. [12] Steven Swanson, Ken Michelson , Andrew Schwerin, and...Program MIT Lincoln LaboratoryHPEC 2004-3 JML 28 Sep 2004 Tiled Architectures • Monolithic single-chip architectures are becoming rare in the industry

  9. Heterogeneous reconfigurable processors for real-time baseband processing from algorithm to architecture

    CERN Document Server

    Zhang, Chenxin; Öwall, Viktor

    2016-01-01

    This book focuses on domain-specific heterogeneous reconfigurable architectures, demonstrating for readers a computing platform which is flexible enough to support multiple standards, multiple modes, and multiple algorithms. The content is multi-disciplinary, covering areas of wireless communication, computing architecture, and circuit design. The platform described provides real-time processing capability with reasonable implementation cost, achieving balanced trade-offs among flexibility, performance, and hardware costs. The authors discuss efficient design methods for wireless communication processing platforms, from both an algorithm and architecture design perspective. Coverage also includes computing platforms for different wireless technologies and standards, including MIMO, OFDM, Massive MIMO, DVB, WLAN, LTE/LTE-A, and 5G. •Discusses reconfigurable architectures, including hardware building blocks such as processing elements, memory sub-systems, Network-on-Chip (NoC), and dynamic hardware reconfigur...

  10. Enterprise architecture at work modelling, communication and analysis

    CERN Document Server

    Lankhorst, Marc

    2017-01-01

    This book offers a coherent modeling language that captures the complexity of architectural domains and their relations, allowing the construction of integrated enterprise architecture models. Introduces the ArchiMate® language for enterprise architecture.

  11. Software Communication Architecture Implementation and Its Waveform Application

    Institute of Scientific and Technical Information of China (English)

    SUN Pei-gang; ZHAO Hai; WANG Ting-chang; FAN Jian-hua

    2006-01-01

    This paper attempts to do a research on the development of software defined radio(SDR) based on software communication architecture(SCA). Firstly, SCA is studied and a whole reference model of SCA3.0 core framework (CF)is realized; Secondly, an application-specific FM3TR waveform is implemented on the platform of common software based on the reference model; Thirdly, from the point of view of real-time performance and software reuse, tests and validations are made on the above realized CF reference model and FM3TR waveform. As a result, the SCA-compliant SDR has favorable interoperability and software portability and can satisfy the real-time performance requirements which are not too rigorous.

  12. Remote Control for Robotic Systems Using CORBA as Communication Architecture

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This paper proposes a novel method to implement network connections among a client and remoterobotic systems using CORBA for developing telecare system to aid the aged or disabled. The proposed methodmakes system have low cost and wide availability, high scaling and inter-operating ability to allow the clients andserver objects, written in different languages, run in different operating system, and connected in different net-work to inter-operate. It also makes system easy to be extended and integrated with the other technologies andapplications distributed over the Internet. Using CORBA as a communication architecture, we developed hard-ware base, task-level robot arm control server, live image feedback server and mobile robot control server,which can provide some basic care services to aid the aged and disabled.

  13. Molecular communication among biological nanomachines: a layered architecture and research issues.

    Science.gov (United States)

    Nakano, Tadashi; Suda, Tatsuya; Okaie, Yutaka; Moore, Michael J; Vasilakos, Athanasios V

    2014-09-01

    Molecular communication is an emerging communication paradigm for biological nanomachines. It allows biological nanomachines to communicate through exchanging molecules in an aqueous environment and to perform collaborative tasks through integrating functionalities of individual biological nanomachines. This paper develops the layered architecture of molecular communication and describes research issues that molecular communication faces at each layer of the architecture. Specifically, this paper applies a layered architecture approach, traditionally used in communication networks, to molecular communication, decomposes complex molecular communication functionality into a set of manageable layers, identifies basic functionalities of each layer, and develops a descriptive model consisting of key components of the layer for each layer. This paper also discusses open research issues that need to be addressed at each layer. In addition, this paper provides an example design of targeted drug delivery, a nanomedical application, to illustrate how the layered architecture helps design an application of molecular communication. The primary contribution of this paper is to provide an in-depth architectural view of molecular communication. Establishing a layered architecture of molecular communication helps organize various research issues and design concerns into layers that are relatively independent of each other, and thus accelerates research in each layer and facilitates the design and development of applications of molecular communication.

  14. A New Signaling Architecture THREP with Autonomous Radio-Link Control for Wireless Communications Systems

    Science.gov (United States)

    Hirono, Masahiko; Nojima, Toshio

    This paper presents a new signaling architecture for radio-access control in wireless communications systems. Called THREP (for THREe-phase link set-up Process), it enables systems with low-cost configurations to provide tetherless access and wide-ranging mobility by using autonomous radio-link controls for fast cell searching and distributed call management. A signaling architecture generally consists of a radio-access part and a service-entity-access part. In THREP, the latter part is divided into two steps: preparing a communication channel, and sustaining it. Access control in THREP is thus composed of three separated parts, or protocol phases. The specifications of each phase are determined independently according to system requirements. In the proposed architecture, the first phase uses autonomous radio-link control because we want to construct low-power indoor wireless communications systems. Evaluation of channel usage efficiency and hand-over loss probability in the personal handy-phone system (PHS) shows that THREP makes the radio-access sub-system operations in a practical application model highly efficient, and the results of a field experiment show that THREP provides sufficient protection against severe fast CNR degradation in practical indoor propagation environments.

  15. A heterogeneous multiprocessor architecture for low-power audio signal processing applications

    DEFF Research Database (Denmark)

    Paker, Ozgun; Sparsø, Jens; Haandbæk, Niels

    2001-01-01

    This paper describes a low-power programmable DSP architecture that targets audio signal processing. The architecture can be characterized as a heterogeneous multiprocessor consisting of small and simple instruction set processors called mini-cores that communicate using message passing. The proc......This paper describes a low-power programmable DSP architecture that targets audio signal processing. The architecture can be characterized as a heterogeneous multiprocessor consisting of small and simple instruction set processors called mini-cores that communicate using message passing....... Early results obtained from the design of a prototype chip containing filter processors for a hearing aid application, indicate a power consumption that is an order of magnitude better than current state of the art low-power audio DSPs implemented using full-custom techniques. This is due to: (1...

  16. Heterogeneous architecture to process swarm optimization algorithms

    Directory of Open Access Journals (Sweden)

    Maria A. Dávila-Guzmán

    2014-01-01

    Full Text Available Since few years ago, the parallel processing has been embedded in personal computers by including co-processing units as the graphics processing units resulting in a heterogeneous platform. This paper presents the implementation of swarm algorithms on this platform to solve several functions from optimization problems, where they highlight their inherent parallel processing and distributed control features. In the swarm algorithms, each individual and dimension problem are parallelized by the granularity of the processing system which also offer low communication latency between individuals through the embedded processing. To evaluate the potential of swarm algorithms on graphics processing units we have implemented two of them: the particle swarm optimization algorithm and the bacterial foraging optimization algorithm. The algorithms’ performance is measured using the acceleration where they are contrasted between a typical sequential processing platform and the NVIDIA GeForce GTX480 heterogeneous platform; the results show that the particle swarm algorithm obtained up to 36.82x and the bacterial foraging swarm algorithm obtained up to 9.26x. Finally, the effect to increase the size of the population is evaluated where we show both the dispersion and the quality of the solutions are decreased despite of high acceleration performance since the initial distribution of the individuals can converge to local optimal solution.

  17. Process-based Architecture for Robustness Applying Linux isolation mechanism in MG-R

    NARCIS (Netherlands)

    Matsinger, A.A.J.; Kourzanov, P.; Gopakumar, G.N.

    2006-01-01

    This report contains the results of a feasibility study of applyingLinux facilities for isolating and protecting processes, and for communication and synchronisation between processes, to the MG-R architecture so as to improve the robustness. Moreover some guidelines andtrade-offs are discussed how

  18. Architectural Prototyping

    DEFF Research Database (Denmark)

    Bardram, Jakob; Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2004-01-01

    A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders......' concerns with respect to a system under development. An architectural prototype is primarily a learning and communication vehicle used to explore and experiment with alternative architectural styles, features, and patterns in order to balance different architectural qualities. The use of architectural...... prototypes in the development process is discussed, and we argue that such prototypes can play a role throughout the entire process. The use of architectural prototypes is illustrated by three distinct cases of creating software systems. We argue that architectural prototyping can provide key insights...

  19. Architectural prototyping

    DEFF Research Database (Denmark)

    Bardram, Jakob Eyvind; Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2004-01-01

    A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders......' concerns with respect to a system under development. An architectural prototype is primarily a learning and communication vehicle used to explore and experiment with alternative architectural styles, features, and patterns in order to balance different architectural qualities. The use of architectural...... prototypes in the development process is discussed, and we argue that such prototypes can play a role throughout the entire process. The use of architectural prototypes is illustrated by three distinct cases of creating software systems. We argue that architectural prototyping can provide key insights...

  20. Neural Network Communications Signal Processing

    Science.gov (United States)

    1994-08-01

    Technical Information Report for the Neural Network Communications Signal Processing Program, CDRL A003, 31 March 1993. Software Development Plan for...track changing jamming conditions to provide the decoder with the best log- likelihood ratio metrics at a given time. As part of our development plan we...Artificial Neural Networks (ICANN-91) Volume 2, June 24-28, 1991, pp. 1677-1680. Kohonen, Teuvo, Raivio, Kimmo, Simula, Oli, Venta , 011i, Henriksson

  1. An end-to-end communications architecture for condition-based maintenance applications

    Science.gov (United States)

    Kroculick, Joseph

    2014-06-01

    This paper explores challenges in implementing an end-to-end communications architecture for Condition-Based Maintenance Plus (CBM+) data transmission which aligns with the Army's Network Modernization Strategy. The Army's Network Modernization strategy is based on rolling out network capabilities which connect the smallest unit and Soldier level to enterprise systems. CBM+ is a continuous improvement initiative over the life cycle of a weapon system or equipment to improve the reliability and maintenance effectiveness of Department of Defense (DoD) systems. CBM+ depends on the collection, processing and transport of large volumes of data. An important capability that enables CBM+ is an end-to-end network architecture that enables data to be uploaded from the platform at the tactical level to enterprise data analysis tools. To connect end-to-end maintenance processes in the Army's supply chain, a CBM+ network capability can be developed from available network capabilities.

  2. Processes for an Architecture of Volume

    DEFF Research Database (Denmark)

    Mcgee, Wes; Feringa, Jelle; Søndergaard, Asbjørn

    2013-01-01

    This paper addresses both the architectural, conceptual motivations and the tools and techniques necessary for the digital production of an architecture of volume. The robotic manufacturing techniques of shaping volumetric materials by hot wire and abrasive wire cutting are discussed through...

  3. Wind farm protection using an IEC 61850 process bus architecture

    Energy Technology Data Exchange (ETDEWEB)

    McGinn, D. [GE Digital Energy, Toronto, ON (Canada)

    2009-07-01

    This presentation discussed wind farm protection using an IEC 61850 process bus architecture. Data is transmitted via IEC 61850 messages over a fiber optic communications network to a central relaying unit (CRU) that executes protection and control (P and C) functions for a whole wind farm. The presentation also discussed the need to further simplify P and C design. Challenges of wind farm protection include physical distance; relay location; and selectivity/isolation. P and C hardware evolution was illustrated and its advantages were presented. These included one relay to set, configure, test, and maintain; eliminate the need for transfer trips; free monitoring; free disturbance recording; and easy integration of data. The development of commercially available systems began around 1990 with the IPACS system developed by Hydro One, and the SIPSUR system developed in Spain. 7 figs.

  4. Single Carrier Architecture for High Data Rate Wireless PAN Communications System

    CERN Document Server

    Rakotondrainibe, Lahatra; Zaharia, Gheorghe; Grunfelder, Guy; Zein, Ghaïs El

    2010-01-01

    A 60 GHz wireless Gigabit Ethernet (G.E.) communication system is developed at IETR. As the 60 GHz radio link operates only in a single-room configuration, an additional Radio over Fibre (RoF) link is used to ensure the communications in all the rooms of a residential environment. The realized system covers 2 GHz bandwidth. Due to the hardware constraints, a symbol rate at 875 Mbps is attained using simple single carrier architecture. In the baseband (BB) processing block, an original byte/frame synchronization process is designed to provide a smaller value of the preamble missing detection and false alarm probabilities. Bit error rate (BER) measurements have been realized in a large gym for line-of-sight (LOS) conditions. A Tx-Rx distance greater than 30 meters was attained with low BER using high gain antennas and forward error correction RS (255, 239) coding.

  5. Modeling, analysis and optimization of network-on-chip communication architectures

    CERN Document Server

    Ogras, Umit Y

    2013-01-01

    Traditionally, design space exploration for Systems-on-Chip (SoCs) has focused on the computational aspects of the problem at hand. However, as the number of components on a single chip and their performance continue to increase, the communication architecture plays a major role in the area, performance and energy consumption of the overall system. As a result, a shift from computation-based to communication-based design becomes mandatory. Towards this end, network-on-chip (NoC) communication architectures have emerged recently as a promising alternative to classical bus and point-to-point communication architectures. This book explores outstanding research problems related to modeling, analysis and optimization of NoC communication architectures. More precisely, we present novel design methodologies, software tools and FPGA prototypes to aid the design of application-specific NoCs.

  6. Quantum communication and information processing

    Science.gov (United States)

    Beals, Travis Roland

    Quantum computers enable dramatically more efficient algorithms for solving certain classes of computational problems, but, in doing so, they create new problems. In particular, Shor's Algorithm allows for efficient cryptanalysis of many public-key cryptosystems. As public key cryptography is a critical component of present-day electronic commerce, it is crucial that a working, secure replacement be found. Quantum key distribution (QKD), first developed by C.H. Bennett and G. Brassard, offers a partial solution, but many challenges remain, both in terms of hardware limitations and in designing cryptographic protocols for a viable large-scale quantum communication infrastructure. In Part I, I investigate optical lattice-based approaches to quantum information processing. I look at details of a proposal for an optical lattice-based quantum computer, which could potentially be used for both quantum communications and for more sophisticated quantum information processing. In Part III, I propose a method for converting and storing photonic quantum bits in the internal state of periodically-spaced neutral atoms by generating and manipulating a photonic band gap and associated defect states. In Part II, I present a cryptographic protocol which allows for the extension of present-day QKD networks over much longer distances without the development of new hardware. I also present a second, related protocol which effectively solves the authentication problem faced by a large QKD network, thus making QKD a viable, information-theoretic secure replacement for public key cryptosystems.

  7. Integrating verbal and nonverbal communication in a dynamic neural field architecture for human-robot interaction

    Directory of Open Access Journals (Sweden)

    Estela Bicho

    2010-05-01

    Full Text Available How do humans coordinate their intentions, goals and motor behaviors when performing joint action tasks? Recent experimental evidence suggests that resonance processes in the observer's motor system are crucially involved in our ability to understand actions of others', to infer their goals and even to comprehend their action-related language. In this paper, we present a control architecture for human-robot collaboration that exploits this close perception-action linkage as a means to achieve more natural and efficient communication grounded in sensorimotor experiences. The architecture is formalized by a coupled system of dynamic neural fields representing a distributed network of neural populations that encode in their activation patterns goals, actions and shared task knowledge. We validate the verbal and non-verbal communication skills of the robot in a joint assembly task in which the human-robot team has to construct toy objects from their components. The experiments focus on the robot’s capacity to anticipate the user’s needs and to detect and communicate unexpected events that may occur during joint task execution.

  8. Security Risk Assessment Process for UAS in the NAS CNPC Architecture

    Science.gov (United States)

    Iannicca, Dennis Christopher; Young, Daniel Paul; Suresh, Thadhani; Winter, Gilbert A.

    2013-01-01

    This informational paper discusses the risk assessment process conducted to analyze Control and Non-Payload Communications (CNPC) architectures for integrating civil Unmanned Aircraft Systems (UAS) into the National Airspace System (NAS). The assessment employs the National Institute of Standards and Technology (NIST) Risk Management framework to identify threats, vulnerabilities, and risks to these architectures and recommends corresponding mitigating security controls. This process builds upon earlier work performed by RTCA Special Committee (SC) 203 and the Federal Aviation Administration (FAA) to roadmap the risk assessment methodology and to identify categories of information security risks that pose a significant impact to aeronautical communications systems. A description of the deviations from the typical process is described in regards to this aeronautical communications system. Due to the sensitive nature of the information, data resulting from the risk assessment pertaining to threats, vulnerabilities, and risks is beyond the scope of this paper

  9. Versatile architectures for onboard payload signal processing

    NARCIS (Netherlands)

    Walters, K.H.G.

    2013-01-01

    This thesis describes a system-on-chip (SoC) architecture for future space mis- sions. The SoC market for deep-space missions develops slowly and is limited in features compared to the market of consumer electronics. Where consumers of- ten cannot keep up with the features which are offered to them

  10. An Architectural Style for Closed-loop Process-Control

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    This report describes an architectural style for distributed closed-loop process control systems with high performance and hard real-time constraints. The style strikes a good balance between the architectural qualities of performance and modifiability/maintainability that traditionally are often...

  11. An Architectural Style for Closed-loop Process-Control

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Eriksen, Ole

    2003-01-01

    This report describes an architectural style for distributed closed-loop process control systems with high performance and hard real-time constraints. The style strikes a good balance between the architectural qualities of performance and modifiability/maintainability that traditionally are often...

  12. Interactive A3 Architecture Overviews ☆: Intuitive Functionalities for Effective Communication

    NARCIS (Netherlands)

    Brussel, Frank F.; Bonnema, Gerrit Maarten

    2015-01-01

    The A3 Architecture Overviews introduced earlier provide a powerful communication medium in systems engineering and architecting. Intended originally for reverse architecting, they are now also applied for designing system architectures and for systems of systems. With the current development in

  13. Interactive A3 Architecture Overviews ☆: Intuitive Functionalities for Effective Communication

    NARCIS (Netherlands)

    Brussel, Frank F.; Bonnema, G. Maarten

    2015-01-01

    The A3 Architecture Overviews introduced earlier provide a powerful communication medium in systems engineering and architecting. Intended originally for reverse architecting, they are now also applied for designing system architectures and for systems of systems. With the current development in use

  14. Enabling Future Science and Human Exploration with NASA's Next Generation near Earth and Deep Space Communications and Navigation Architecture

    Science.gov (United States)

    Reinhart, Richard C.; Schier, James S.; Israel, David J.; Tai, Wallace; Liebrecht, Philip E.; Townes, Stephen A.

    2017-01-01

    The National Aeronautics and Space Administration (NASA) is studying alternatives for the United States space communications architecture through the 2040 timeframe. This architecture provides communication and navigation services to both human exploration and science missions throughout the solar system. Several of NASA's key space assets are approaching their end of design life and major systems are in need of replacement. The changes envisioned in the relay satellite architecture and capabilities around both Earth and Mars are significant undertakings and occur only once or twice each generation, and therefore is referred to as NASA's next generation space communications architecture. NASA's next generation architecture will benefit from technology and services developed over recent years. These innovations will provide missions with new operations concepts, increased performance, and new business and operating models. Advancements in optical communications will enable high-speed data channels and the use of new and more complex science instruments. Modern multiple beam/multiple access technologies such as those employed on commercial high throughput satellites will enable enhanced capabilities for on-demand service, and with new protocols will help provide Internet-like connectivity for cooperative spacecraft to improve data return and coordinate joint mission objectives. On-board processing with autonomous and cognitive networking will play larger roles to help manage system complexity. Spacecraft and ground systems will coordinate among themselves to establish communications, negotiate link connectivity, and learn to share spectrum to optimize resource allocation. Spacecraft will autonomously navigate, plan trajectories, and handle off-nominal events. NASA intends to leverage the ever-expanding capabilities of the satellite communications industry and foster its continued growth. NASA's technology development will complement and extend commercial capabilities

  15. Modular, Cost-Effective, Extensible Avionics Architecture for Secure, Mobile Communications

    Science.gov (United States)

    Ivancic, William D.

    2007-01-01

    Current onboard communication architectures are based upon an all-in-one communications management unit. This unit and associated radio systems has regularly been designed as a one-off, proprietary system. As such, it lacks flexibility and cannot adapt easily to new technology, new communication protocols, and new communication links. This paper describes the current avionics communication architecture and provides a historical perspective of the evolution of this system. A new onboard architecture is proposed that allows full use of commercial-off-the-shelf technologies to be integrated in a modular approach thereby enabling a flexible, cost-effective and fully deployable design that can take advantage of ongoing advances in the computer, cryptography, and telecommunications industries.

  16. Affinity-Based Network Interfaces for Efficient Communication on Multicore Architectures

    Institute of Scientific and Technical Information of China (English)

    Andrés Ortiz; Julio Ortega; Antonio F.Díaz; Alberto Prieto

    2013-01-01

    Improving the network interface performance is needed by the demand of applications with high communication requirements (for example,some multimedia,real-time,and high-performance computing applications),and the availability of network links providing multiple gigabits per second bandwidths that could require many processor cycles for communication tasks.Multicore architectures,the current trend in the microprocessor development to cope with the difficulties to further increase clock frequencies and microarchitecture efficiencies,provide new opportunities to exploit the parallelism available in the nodes for designing efficient communication architectures.Nevertheless,although present OS network stacks include multiple threals that make it possible to execute network tasks concurrently in the kernel,the implementations of packet-based or connection-based parallelism are not trivial as they have to take into account issues related with the cost of synchronization in the access to shared resources and the efficient use of caches.Therefore,a common trend in many recent researches on this topic is to assign network interrupts and the corresponding protocol and network application processing to the same core,as with this affinity scheduling it would be possible to reduce the contention for shared resources and the cache misses.In this paper we propose and analyze several configurations to distribute the network interface among the different cores available in the server.These alternatives have been devised according to the affinity of the corresponding communication tasks with the location (proximity to the memories where the different data structures are stored) and characteristics of the processing core.As this approach uses several cores to accelerate the communication path of a given connection,it can be seen as complementary to those that consider several cores to simultaneously process packets belonging to either the same or different connections.Message passing

  17. Communication and Memory Architecture Design of Application-Specific High-End Multiprocessors

    Directory of Open Access Journals (Sweden)

    Yahya Jan

    2012-01-01

    Full Text Available This paper is devoted to the design of communication and memory architectures of massively parallel hardware multiprocessors necessary for the implementation of highly demanding applications. We demonstrated that for the massively parallel hardware multiprocessors the traditionally used flat communication architectures and multi-port memories do not scale well, and the memory and communication network influence on both the throughput and circuit area dominates the processors influence. To resolve the problems and ensure scalability, we proposed to design highly optimized application-specific hierarchical and/or partitioned communication and memory architectures through exploring and exploiting the regularity and hierarchy of the actual data flows of a given application. Furthermore, we proposed some data distribution and related data mapping schemes in the shared (global partitioned memories with the aim to eliminate the memory access conflicts, as well as, to ensure that our communication design strategies will be applicable. We incorporated these architecture synthesis strategies into our quality-driven model-based multi-processor design method and related automated architecture exploration framework. Using this framework, we performed a large series of experiments that demonstrate many various important features of the synthesized memory and communication architectures. They also demonstrate that our method and related framework are able to efficiently synthesize well scalable memory and communication architectures even for the high-end multiprocessors. The gains as high as 12-times in performance and 25-times in area can be obtained when using the hierarchical communication networks instead of the flat networks. However, for the high parallelism levels only the partitioned approach ensures the scalability in performance.

  18. Formation process of Malaysian modern architecture under influence of nationalism

    OpenAIRE

    宇高, 雄志; 山崎, 大智

    2001-01-01

    This paper examines the Formation Process of Malaysian Modern Architecture under Influence of Nationalism,through the process of independence of Malaysia. The national style as "Malaysian national architecture" which hasengaged on background of political environment under the post colonial situation. Malaysian urban design is alsodetermined under the balance of both of ethnic culture and the national culture. In Malaysia, they decided to choosethe Malay ethnic culture as the national culture....

  19. Cost management and cross-functional communication through product architectures

    NARCIS (Netherlands)

    Zwerink, Ruud; Wouters, Marc; Hissel, Paul; Kerssens-van Drongelen, Inge

    2007-01-01

    Product architecture decisions regarding, for example, product modularity, component commonality, and design re-use, are important for balancing costs, responsiveness, quality, and other important business objectives. Firms are challenged with complex tradeoffs between competing design priorities, f

  20. Theoretical Modelling of Intercultural Communication Process

    Directory of Open Access Journals (Sweden)

    Mariia Soter

    2016-08-01

    Full Text Available The definition of the concepts of “communication”, “intercultural communication”, “model of communication” are analyzed in the article. The basic components of the communication process are singled out. The model of intercultural communication is developed. Communicative, behavioral and complex skills for optimal organization of intercultural communication, establishment of productive contact with a foreign partner to achieve mutual understanding, searching for acceptable ways of organizing interaction and cooperation for both communicants are highlighted in the article. It is noted that intercultural communication through interaction between people affects the development of different cultures’ aspects.

  1. THE IMPORTANCE OF COMMUNICATION IN EDUCATIONAL PROCESS

    Directory of Open Access Journals (Sweden)

    Arina MODREA

    2016-06-01

    Full Text Available This article aims realization process called relational communication in the educational processin termsof reconsidering the role of the student in the romanian education correlated with that european. School communication requirements are constant lyincreasing, which is why it multiplies forms of communication and expand their communication requirements toact. This development oblige the teachert o becomea good professional communication staff, both in the domination of the artcommunication, as well as that of receiver that of influencing the formation of his personality in many respects, communicative competencegainingin this way, anintegrative value of their teaching ability.

  2. Robust Networking Architecture and Secure Communication Scheme for Heterogeneous Wireless Sensor Networks

    Science.gov (United States)

    McNeal, McKenzie, III.

    2012-01-01

    Current networking architectures and communication protocols used for Wireless Sensor Networks (WSNs) have been designed to be energy efficient, low latency, and long network lifetime. One major issue that must be addressed is the security in data communication. Due to the limited capabilities of low cost and small sized sensor nodes, designing…

  3. Robust Networking Architecture and Secure Communication Scheme for Heterogeneous Wireless Sensor Networks

    Science.gov (United States)

    McNeal, McKenzie, III.

    2012-01-01

    Current networking architectures and communication protocols used for Wireless Sensor Networks (WSNs) have been designed to be energy efficient, low latency, and long network lifetime. One major issue that must be addressed is the security in data communication. Due to the limited capabilities of low cost and small sized sensor nodes, designing…

  4. The communication process in virtual teams

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available The purpose of this paper is to present the paradigms of virtual teams in the communication process in the context of the existing literature in this field. We argue the above issues and we explore the communication process within virtual teams like an interactive, complex and limiting process in connxion with the advantages and disadvantages offered by information technology.

  5. THE IMPORTANCE OF COMMUNICATION IN EDUCATIONAL PROCESS

    National Research Council Canada - National Science Library

    Arina MODREA; Alexandra SILVAȘ

    2016-01-01

    This article aims realization process called relational communication in the educational processin termsof reconsidering the role of the student in the romanian education correlated with that european...

  6. Evolutionary Space Communications Architectures for Human/Robotic Exploration and Science Missions

    Science.gov (United States)

    Bhasin, Kul; Hayden, Jeffrey L.

    2004-01-01

    NASA enterprises have growing needs for an advanced, integrated, communications infrastructure that will satisfy the capabilities needed for multiple human, robotic and scientific missions beyond 2015. Furthermore, the reliable, multipoint infrastructure is required to provide continuous, maximum coverage of areas of concentrated activities, such as around Earth and in the vicinity of the Moon or Mars, with access made available on demand of the human or robotic user. As a first step, the definitions of NASA's future space communications and networking architectures are underway. Architectures that describe the communications and networking needed between the nodal regions consisting of Earth, Moon, Lagrange points, Mars, and the places of interest within the inner and outer solar system have been laid out. These architectures will need the modular flexibility that must be included in the communication and networking technologies to enable the infrastructure to grow in capability with time and to transform from supporting robotic missions in the solar system to supporting human ventures to Mars, Jupiter, Jupiter's moons, and beyond. The protocol-based networking capability seamlessly connects the backbone, access, inter-spacecraft and proximity network elements of the architectures employed in the infrastructure. In this paper, we present the summary of NASA's near and long term needs and capability requirements that were gathered by participative methods. We describe an integrated architecture concept and model that will enable communications for evolutionary robotic and human science missions. We then define the communication nodes, their requirements, and various options to connect them.

  7. Energy- and Performance-Driven NoC Communication Architecture Synthesis Using a Decomposition Approach

    CERN Document Server

    Ogras, Umit Y

    2011-01-01

    In this paper, we present a methodology for customized communication architecture synthesis that matches the communication requirements of the target application. This is an important problem, particularly for network-based implementations of complex applications. Our approach is based on using frequently encountered generic communication primitives as an alphabet capable of characterizing any given communication pattern. The proposed algorithm searches through the entire design space for a solution that minimizes the system total energy consumption, while satisfying the other design constraints. Compared to the standard mesh architecture, the customized architecture generated by the newly proposed approach shows about 36% throughput increase and 51% reduction in the energy required to encrypt 128 bits of data with a standard encryption algorithm.

  8. Photonic Architecture for Scalable Quantum Information Processing in Diamond

    Directory of Open Access Journals (Sweden)

    Kae Nemoto

    2014-08-01

    Full Text Available Physics and information are intimately connected, and the ultimate information processing devices will be those that harness the principles of quantum mechanics. Many physical systems have been identified as candidates for quantum information processing, but none of them are immune from errors. The challenge remains to find a path from the experiments of today to a reliable and scalable quantum computer. Here, we develop an architecture based on a simple module comprising an optical cavity containing a single negatively charged nitrogen vacancy center in diamond. Modules are connected by photons propagating in a fiber-optical network and collectively used to generate a topological cluster state, a robust substrate for quantum information processing. In principle, all processes in the architecture can be deterministic, but current limitations lead to processes that are probabilistic but heralded. We find that the architecture enables large-scale quantum information processing with existing technology.

  9. The Process Architecture of EU Territorial Cohesion Policy

    OpenAIRE

    Andreas Faludi

    2010-01-01

    When preparing the European Spatial Development Perspective (ESDP), Member States were supported by the European Commission but denied the EU a competence in the matter. Currently, the Treaty of Lisbon identifies territorial cohesion as a competence shared between the Union and the Member States. This paper is about the process architecture of territorial cohesion policy. In the past, this architecture resembled the Open Method of Coordination (OMC) which the White Paper on European Governanc...

  10. Complex processes from dynamical architectures with time-scale hierarchy.

    Directory of Open Access Journals (Sweden)

    Dionysios Perdikis

    Full Text Available The idea that complex motor, perceptual, and cognitive behaviors are composed of smaller units, which are somehow brought into a meaningful relation, permeates the biological and life sciences. However, no principled framework defining the constituent elementary processes has been developed to this date. Consequently, functional configurations (or architectures relating elementary processes and external influences are mostly piecemeal formulations suitable to particular instances only. Here, we develop a general dynamical framework for distinct functional architectures characterized by the time-scale separation of their constituents and evaluate their efficiency. Thereto, we build on the (phase flow of a system, which prescribes the temporal evolution of its state variables. The phase flow topology allows for the unambiguous classification of qualitatively distinct processes, which we consider to represent the functional units or modes within the dynamical architecture. Using the example of a composite movement we illustrate how different architectures can be characterized by their degree of time scale separation between the internal elements of the architecture (i.e. the functional modes and external interventions. We reveal a tradeoff of the interactions between internal and external influences, which offers a theoretical justification for the efficient composition of complex processes out of non-trivial elementary processes or functional modes.

  11. Complex processes from dynamical architectures with time-scale hierarchy.

    Science.gov (United States)

    Perdikis, Dionysios; Huys, Raoul; Jirsa, Viktor

    2011-02-10

    The idea that complex motor, perceptual, and cognitive behaviors are composed of smaller units, which are somehow brought into a meaningful relation, permeates the biological and life sciences. However, no principled framework defining the constituent elementary processes has been developed to this date. Consequently, functional configurations (or architectures) relating elementary processes and external influences are mostly piecemeal formulations suitable to particular instances only. Here, we develop a general dynamical framework for distinct functional architectures characterized by the time-scale separation of their constituents and evaluate their efficiency. Thereto, we build on the (phase) flow of a system, which prescribes the temporal evolution of its state variables. The phase flow topology allows for the unambiguous classification of qualitatively distinct processes, which we consider to represent the functional units or modes within the dynamical architecture. Using the example of a composite movement we illustrate how different architectures can be characterized by their degree of time scale separation between the internal elements of the architecture (i.e. the functional modes) and external interventions. We reveal a tradeoff of the interactions between internal and external influences, which offers a theoretical justification for the efficient composition of complex processes out of non-trivial elementary processes or functional modes.

  12. Integrating IPsec within OpenFlow Architecture for Secure Group Communication

    Institute of Scientific and Technical Information of China (English)

    Vahid Heydari Fami Tafreshi; Ebrahim Ghazisaeedi; Haitham Cruickshank; Zhili Sun

    2014-01-01

    Network security protocols such as IPsec have been used for many years to ensure robust end-to-end communication and are impor-tant in the context of SDN. Despite the widespread installation of IPsec to date, per-packet protection offered by the protocol is not very compatible with OpenFlow and flow-like behavior. OpenFlow architecture cannot aggregate IPsec-ESP flows in transport mode or tunnel mode because layer-3 information is encrypted and therefore unreadable. In this paper, we propose using the Secu-rity Parameter Index (SPI) of IPsec within the OpenFlow architecture to identify and direct IPsec flows. This enables IPsec to con-form to the packet-based behavior of OpenFlow architecture. In addition, by distinguishing between IPsec flows, the architecture is particularly suited to secure group communication.

  13. A system architecture, processor, and communication protocol for secure implants

    NARCIS (Netherlands)

    C. Strydis (Christos); R.M. Seepers (Robert); P. Peris-Lopez (Pedro); D. Siskos (Dimitrios); I. Sourdis (Ioannis)

    2013-01-01

    textabstractSecure and energy-efficient communication between Implantable Medical Devices (IMDs) and authorized external users is attracting increasing attention these days. However, there currently exists no systematic approach to the problem, while solutions from neighboring fields, such as

  14. In-flight control and communication architecture of the GLORIA imaging limb-sounder on atmospheric research aircraft

    Science.gov (United States)

    Kretschmer, E.; Bachner, M.; Blank, J.; Dapp, R.; Ebersoldt, A.; Friedl-Vallon, F.; Guggenmoser, T.; Gulde, T.; Hartmann, V.; Lutz, R.; Maucher, G.; Neubert, T.; Oelhaf, H.; Preusse, P.; Schardt, G.; Schmitt, C.; Schönfeld, A.; Tan, V.

    2015-02-01

    The Gimballed Limb Observer for Radiance Imaging of the Atmosphere (GLORIA), a Fourier transform spectrometer based limb spectral imager, operates on high-altitude research aircraft to study the transit region between the troposphere and the stratosphere. It is one of the most sophisticated systems to be flown on research aircraft in Europe, requiring constant monitoring and human intervention in addition to an automation system. To ensure proper functionality and interoperability on multiple platforms, a flexible control and communication system was laid out. The architectures of the communication system as well as the protocols used are reviewed. The integration of this architecture in the automation process as well as the scientific campaign flight application context are discussed.

  15. In-flight control and communication architecture of the GLORIA imaging limb sounder on atmospheric research aircraft

    Science.gov (United States)

    Kretschmer, E.; Bachner, M.; Blank, J.; Dapp, R.; Ebersoldt, A.; Friedl-Vallon, F.; Guggenmoser, T.; Gulde, T.; Hartmann, V.; Lutz, R.; Maucher, G.; Neubert, T.; Oelhaf, H.; Preusse, P.; Schardt, G.; Schmitt, C.; Schönfeld, A.; Tan, V.

    2015-06-01

    The Gimballed Limb Observer for Radiance Imaging of the Atmosphere (GLORIA), a Fourier-transform-spectrometer-based limb spectral imager, operates on high-altitude research aircraft to study the transit region between the troposphere and the stratosphere. It is one of the most sophisticated systems to be flown on research aircraft in Europe, requiring constant monitoring and human intervention in addition to an automation system. To ensure proper functionality and interoperability on multiple platforms, a flexible control and communication system was laid out. The architectures of the communication system as well as the protocols used are reviewed. The integration of this architecture in the automation process as well as the scientific campaign flight application context are discussed.

  16. In-flight control and communication architecture of the GLORIA imaging limb-sounder on atmospheric research aircraft

    Directory of Open Access Journals (Sweden)

    E. Kretschmer

    2015-02-01

    Full Text Available The Gimballed Limb Observer for Radiance Imaging of the Atmosphere (GLORIA, a Fourier transform spectrometer based limb spectral imager, operates on high-altitude research aircraft to study the transit region between the troposphere and the stratosphere. It is one of the most sophisticated systems to be flown on research aircraft in Europe, requiring constant monitoring and human intervention in addition to an automation system. To ensure proper functionality and interoperability on multiple platforms, a flexible control and communication system was laid out. The architectures of the communication system as well as the protocols used are reviewed. The integration of this architecture in the automation process as well as the scientific campaign flight application context are discussed.

  17. Digital visual communications using a Perceptual Components Architecture

    Science.gov (United States)

    Watson, Andrew B.

    1991-01-01

    The next era of space exploration will generate extraordinary volumes of image data, and management of this image data is beyond current technical capabilities. We propose a strategy for coding visual information that exploits the known properties of early human vision. This Perceptual Components Architecture codes images and image sequences in terms of discrete samples from limited bands of color, spatial frequency, orientation, and temporal frequency. This spatiotemporal pyramid offers efficiency (low bit rate), variable resolution, device independence, error-tolerance, and extensibility.

  18. Biomimetic design processes in architecture: morphogenetic and evolutionary computational design.

    Science.gov (United States)

    Menges, Achim

    2012-03-01

    Design computation has profound impact on architectural design methods. This paper explains how computational design enables the development of biomimetic design processes specific to architecture, and how they need to be significantly different from established biomimetic processes in engineering disciplines. The paper first explains the fundamental difference between computer-aided and computational design in architecture, as the understanding of this distinction is of critical importance for the research presented. Thereafter, the conceptual relation and possible transfer of principles from natural morphogenesis to design computation are introduced and the related developments of generative, feature-based, constraint-based, process-based and feedback-based computational design methods are presented. This morphogenetic design research is then related to exploratory evolutionary computation, followed by the presentation of two case studies focusing on the exemplary development of spatial envelope morphologies and urban block morphologies.

  19. The concept and architecture of data communication in autonomous cleaning robots

    Science.gov (United States)

    Paczesny, Daniel; Nowak, Bartosz; Tarapata, Grzegorz; Marzecki, Michał

    2016-09-01

    The paper presents description of concept of hardware and software architecture which can be easy implemented in autonomous cleaning robots. The requirement for such system is its reliability but still offering free and simple expansions and modifications. The paper describes considerations of the control and communication system, the date frame configuration and the software architecture. To show results of presented control and development system the specialised measurement stand was also proposed and described. All performed tests passed successfully and as a consequence the system architecture was implemented on dedicated cleaning robots.

  20. Reliable and Efficient Parallel Processing Algorithms and Architectures for Modern Signal Processing. Ph.D. Thesis

    Science.gov (United States)

    Liu, Kuojuey Ray

    1990-01-01

    Least-squares (LS) estimations and spectral decomposition algorithms constitute the heart of modern signal processing and communication problems. Implementations of recursive LS and spectral decomposition algorithms onto parallel processing architectures such as systolic arrays with efficient fault-tolerant schemes are the major concerns of this dissertation. There are four major results in this dissertation. First, we propose the systolic block Householder transformation with application to the recursive least-squares minimization. It is successfully implemented on a systolic array with a two-level pipelined implementation at the vector level as well as at the word level. Second, a real-time algorithm-based concurrent error detection scheme based on the residual method is proposed for the QRD RLS systolic array. The fault diagnosis, order degraded reconfiguration, and performance analysis are also considered. Third, the dynamic range, stability, error detection capability under finite-precision implementation, order degraded performance, and residual estimation under faulty situations for the QRD RLS systolic array are studied in details. Finally, we propose the use of multi-phase systolic algorithms for spectral decomposition based on the QR algorithm. Two systolic architectures, one based on triangular array and another based on rectangular array, are presented for the multiphase operations with fault-tolerant considerations. Eigenvectors and singular vectors can be easily obtained by using the multi-pase operations. Performance issues are also considered.

  1. Versatile architectures for onboard payload signal processing

    NARCIS (Netherlands)

    Walters, Karel Hubertus Gerardus

    2013-01-01

    This thesis presents a hardware fused-multiply-add floating point unit, called Sabrewing, which has properties that satisfy the needs for payload processing units. Sabrewing is BSD licensed and made in Europe such that it bypasses the export regulations of the USA. It combines floating-point and fix

  2. Architecture for Cross-Organizational Business Processes

    NARCIS (Netherlands)

    Hoffner, Yigal; Ludwig, Heiko; Gülcü, Ceki; Grefen, P.W.P.J.

    Efficient means of electronic interaction are an essential requirement for the integration of different companies' business processes along the value chain. Until recently, this interaction relied on expensive, complex and inflexible solutions, mostly based on EDI or some proprietary means. The high

  3. Advanced Computing Architectures for Cognitive Processing

    Science.gov (United States)

    2009-07-01

    customized datapath elements, encryption circuits optimized for specific keys, string matching circuits for publish/subscribe computations or...parallel datapaths , RC implementations can concurrently search various paths for determining likely meanings or predictions for text strings. This...signal processing applications, with the ability to relatively easily build a pipelined datapath optimized for the specific application needs. For this

  4. L-Band Digital Aeronautical Communications System Engineering - Concepts of Use, Systems Performance, Requirements, and Architectures

    Science.gov (United States)

    Zelkin, Natalie; Henriksen, Stephen

    2010-01-01

    This NASA Contractor Report summarizes and documents the work performed to develop concepts of use (ConUse) and high-level system requirements and architecture for the proposed L-band (960 to 1164 MHz) terrestrial en route communications system. This work was completed as a follow-on to the technology assessment conducted by NASA Glenn Research Center and ITT for the Future Communications Study (FCS). ITT assessed air-to-ground (A/G) communications concepts of use and operations presented in relevant NAS-level, international, and NAS-system-level documents to derive the appropriate ConUse relevant to potential A/G communications applications and services for domestic continental airspace. ITT also leveraged prior concepts of use developed during the earlier phases of the FCS. A middle-out functional architecture was adopted by merging the functional system requirements identified in the bottom-up assessment of existing requirements with those derived as a result of the top-down analysis of ConUse and higher level functional requirements. Initial end-to-end system performance requirements were derived to define system capabilities based on the functional requirements and on NAS-SR-1000 and the Operational Performance Assessment conducted as part of the COCR. A high-level notional architecture of the L-DACS supporting A/G communication was derived from the functional architecture and requirements.

  5. Developing Architectures and Technologies for an Evolvable NASA Space Communication Infrastructure

    Science.gov (United States)

    Bhasin, Kul; Hayden, Jeffrey

    2004-01-01

    Space communications architecture concepts play a key role in the development and deployment of NASA's future exploration and science missions. Once a mission is deployed, the communication link to the user needs to provide maximum information delivery and flexibility to handle the expected large and complex data sets and to enable direct interaction with the spacecraft and experiments. In human and robotic missions, communication systems need to offer maximum reliability with robust two-way links for software uploads and virtual interactions. Identifying the capabilities to cost effectively meet the demanding space communication needs of 21st century missions, proper formulation of the requirements for these missions, and identifying the early technology developments that will be needed can only be resolved with architecture design. This paper will describe the development of evolvable space communication architecture models and the technologies needed to support Earth sensor web and collaborative observation formation missions; robotic scientific missions for detailed investigation of planets, moons, and small bodies in the solar system; human missions for exploration of the Moon, Mars, Ganymede, Callisto, and asteroids; human settlements in space, on the Moon, and on Mars; and great in-space observatories for observing other star systems and the universe. The resulting architectures will enable the reliable, multipoint, high data rate capabilities needed on demand to provide continuous, maximum coverage of areas of concentrated activities, such as in the vicinity of outposts in-space, on the Moon or on Mars.

  6. A system architecture, processor, and communication protocol for secure implants

    NARCIS (Netherlands)

    C. Strydis (Christos); R.M. Seepers (Robert); P. Peris-Lopez (Pedro); D. Siskos (Dimitrios); I. Sourdis (Ioannis)

    2013-01-01

    textabstractSecure and energy-efficient communication between Implantable Medical Devices (IMDs) and authorized external users is attracting increasing attention these days. However, there currently exists no systematic approach to the problem, while solutions from neighboring fields, such as wirele

  7. Remote handling of TEXTOR diagnostics using CORBA as communication architecture

    NARCIS (Netherlands)

    Kemmerling, G.; Zwoll, K.; de Laat, C. T. A. M.; Kooijman, W.; Korten, M.; Lourens, W.; van der Meer, E.; Oomens, A. A. M.

    1999-01-01

    At the Forschungszentrum Julich, an upgrade of the existing distributed system for data acquisition (DAS) at the fusion experiment TEXTOR94 is under development. DAS is currently restricted to VAX/VMS and DECNET based communications, but it is planned to add UNIX based systems, and to open the local

  8. Integrated protection architectures for radars and communication systems

    NARCIS (Netherlands)

    Wanum, M. van; Monni, S.; Vliet, F.E. van

    2010-01-01

    The protection of phased array T/R modules from high input power levels is an important aspect in reducing vulnerability of radars and communication systems RF electronics in modern military platforms. Different categories of threats can damage the sensitive electronics in the phased-array radar,

  9. Comparison of Communication Architectures and Network Topologies for Distributed Propulsion Controls (Preprint)

    Science.gov (United States)

    2013-05-01

    Course Technology Ptr, 2005. [22] Hermann Kopetz. A comparison of ttp/c and flexray. Institut für Technische Informatik, Technische Universität...Can specification. 1991. [29] AIM GmbH. Afdx training . 2010. [30] FlexRay Consortium et al. Flexray communications system. Protocol Specification... Training Publishing Conferences & Exhibits Comparison of Communication Architectures and Network Topologies for Distributed Propulsion Controls 59th

  10. Destination directed packet switch architecture for a geostationary communication satellite network

    Science.gov (United States)

    Ivancic, W. D.; Shalkhauser, M. J.; Bobinsky, E. A.; Soni, N. J.; Quintana, J. A.; Kim, H.; Wagner, P.; Vanderaar, M.

    1992-01-01

    A major effort at NASA/Lewis is to identify and develop critical digital technologies and components that enable new commercial missions or significantly improve the performance, cost efficiency, and/or reliability of existing and planned space comunications systems. NASA envisions the need for low data rate, direct to the user communications services, for data, facsimile, voice, and video conferencing. A report that focuses on destination directed packet switching architectures for geostationary communication satellites is presented.

  11. Destination directed packet switch architecture for a geostationary communication satellite network

    Science.gov (United States)

    Ivancic, W. D.; Shalkhauser, M. J.; Bobinsky, E. A.; Soni, N. J.; Quintana, J. A.; Kim, H.; Wagner, P.; Vanderaar, M.

    1992-08-01

    A major effort at NASA/Lewis is to identify and develop critical digital technologies and components that enable new commercial missions or significantly improve the performance, cost efficiency, and/or reliability of existing and planned space comunications systems. NASA envisions the need for low data rate, direct to the user communications services, for data, facsimile, voice, and video conferencing. A report that focuses on destination directed packet switching architectures for geostationary communication satellites is presented.

  12. A novel EPON architecture for supporting direct communication between ONUs

    Science.gov (United States)

    Wang, Liqian; Chen, Xue; Wang, Zhen

    2008-11-01

    In the traditional EPON network, optical signal from one ONU can not reach other ONUs. So ONUs can not directly transmit packets to other ONUs .The packets must be transferred by the OLT and it consumes both upstream bandwidth and downstream bandwidth. The bandwidth utilization is low and becomes lower when there are more packets among ONUs. When the EPON network carries P2P (Peer-to-Peer) applications and VPN applications, there would be a great lot of packets among ONUs and the traditional EPON network meets the problem of low bandwidth utilization. In the worst situation the bandwidth utilization of traditional EPON only is 50 percent. This paper proposed a novel EPON architecture and a novel medium access control protocol to realize direct packets transmission between ONUs. In the proposed EPON we adopt a novel circled architecture in the splitter. Due to the circled-splitter, optical signals from an ONU can reach the other ONUs and packets could be directly transmitted between two ONUs. The traffic between two ONUs only consumes upstream bandwidth and the bandwidth cost is reduced by 50 percent. Moreover, this kind of directly transmission reduces the packet's latency.

  13. Completion processing for data communications instructions

    Energy Technology Data Exchange (ETDEWEB)

    Blocksome, Michael A.; Kumar, Sameer; Parker, Jeffrey J.

    2014-07-01

    Completion processing of data communications instructions in a distributed computing environment with computers coupled for data communications through communications adapters and an active messaging interface (`AMI`), injecting for data communications instructions into slots in an injection FIFO buffer a transfer descriptor, at least some of the instructions specifying callback functions; injecting a completion descriptor for each instruction that specifies a callback function into an injection FIFO buffer slot having a corresponding slot in a pending callback list; listing in the pending callback list callback functions specified by data communications instructions; processing each descriptor in the injection FIFO buffer, setting a bit in a completion bit mask corresponding to the slot in the FIFO where the completion descriptor was injected; and calling by the AMI any callback functions in the pending callback list as indicated by set bits in the completion bit mask.

  14. Completion processing for data communications instructions

    Science.gov (United States)

    Blocksome, Michael A.; Kumar, Sameer; Jeffrey, Parker J.

    2014-06-10

    Completion processing of data communications instructions in a distributed computing environment with computers coupled for data communications through communications adapters and an active messaging interface (`AMI`), injecting for data communications instructions into slots in an injection FIFO buffer a transfer descriptor, at least some of the instructions specifying callback functions; injecting a completion descriptor for each instruction that specifies a callback function into an injection FIFO buffer slot having a corresponding slot in a pending callback list; listing in the pending callback list callback functions specified by data communications instructions; processing each descriptor in the injection FIFO buffer, setting a bit in a completion bit mask corresponding to the slot in the FIFO where the completion descriptor was injected; and calling by the AMI any callback functions in the pending callback list as indicated by set bits in the completion bit mask.

  15. Reshaping the Enterprise through an Information Architecture and Process Reengineering.

    Science.gov (United States)

    Laudato, Nicholas C.; DeSantis, Dennis J.

    1995-01-01

    The approach used by the University of Pittsburgh (Pennsylvania) in designing a campus-wide information architecture and a framework for reengineering the business process included building consensus on a general philosophy for information systems, using pattern-based abstraction techniques, applying data modeling and application prototyping, and…

  16. Combinatorial structures and processing in neural blackboard architectures

    NARCIS (Netherlands)

    van der Velde, Frank; van der Velde, Frank; de Kamps, Marc; Besold, Tarek R.; d'Avila Garcez, Artur; Marcus, Gary F.; Miikkulainen, Risto

    2015-01-01

    We discuss and illustrate Neural Blackboard Architectures (NBAs) as the basis for variable binding and combinatorial processing the brain. We focus on the NBA for sentence structure. NBAs are based on the notion that conceptual representations are in situ, hence cannot be copied or transported.

  17. Reshaping the Enterprise through an Information Architecture and Process Reengineering.

    Science.gov (United States)

    Laudato, Nicholas C.; DeSantis, Dennis J.

    1995-01-01

    The approach used by the University of Pittsburgh (Pennsylvania) in designing a campus-wide information architecture and a framework for reengineering the business process included building consensus on a general philosophy for information systems, using pattern-based abstraction techniques, applying data modeling and application prototyping, and…

  18. A Tokenization-Based Communication Architecture for HCE-Enabled NFC Services

    Directory of Open Access Journals (Sweden)

    Busra Ozdenizci

    2016-01-01

    Full Text Available Following the announcement of Host Card Emulation (HCE technology, card emulation mode based Near Field Communication (NFC services have gained further appreciation as an enabler of the Cloud-based Secure Element (SE concept. A comprehensive and complete architecture with a centralized and feasible business model for diverse HCE-based NFC services will be highly appreciated, particularly by Service Providers and users. To satisfy the need in this new emerging research area, a Tokenization-based communication architecture for HCE-based NFC services is presented in this paper. Our architecture proposes Two-Phased Tokenization to enable the identity management of both user and Service Provider. NFC Smartphone users can store, manage, and make use of their sensitive data on the Cloud for NFC services; Service Providers can also provide diverse card emulation NFC services easily through the proposed architecture. In this paper, we initially present the Two-Phased Tokenization model and then validate the proposed architecture by providing a case study on access control. We further evaluate the usability aspect in terms of an authentication scheme. We then discuss the ecosystem and business model comprised of the proposed architecture and emphasize the contributions to ecosystem actors. Finally, suggestions are provided for data protection in transit and at rest.

  19. Communication efficient basic linear algebra computations on hypercube architectures

    Energy Technology Data Exchange (ETDEWEB)

    Johnsson, S.L.

    1987-04-01

    This paper presents a few algorithms for embedding loops and multidimensional arrays in hypercubes with emphasis on proximity preserving embeddings. A proximity preserving embedding minimizes the need for communication bandwidth in computations requiring nearest neighbor communication. Two storage schemes for ''large'' problems on ''small'' machines are suggested and analyzed, and algorithms for matrix transpose, multiplying matrices, factoring matrices, and solving triangular linear systems are presented. A few complete binary tree embeddings are described and analyzed. The data movement in the matrix algorithms is analyzed and it is shown that in the majority of cases the directed routing paths intersect only at nodes of the hypercube allowing for a maximum degree of pipelining.

  20. MAS architecture and knowledge model for vehicles data communication

    Directory of Open Access Journals (Sweden)

    Emmanuel ADAM

    2012-07-01

    Full Text Available Normal 0 21 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US;} Completely autonomous vehicles in traffic should allow to decrease the number of road accident victims greatly, and should allow gains in terms of performance and economy. Modelling the vehicles interaction, and especially knowledge sharing, is one of the main challenges to optimize traffic flow with autonomous vehicles. We propose in this paper a model of knowledge communication between mobile agents on a traffic network. The model of knowledge and of interaction enables to propagate new knowledge without overloading the system with a too large number of communications. For that, only the new knowledge is communicated, and two agents communicate the same knowledge only once. Moreover, in order to allow agents to update their knowledge (perceived or created, a notion of degradation is used. A simulator has been built to evaluate the proposal, before to implement it in mobile robots. Some results of the simulator are proposed in this article.

  1. A preliminary architecture for building communication software from traffic captures

    Science.gov (United States)

    Acosta, Jaime C.; Estrada, Pedro

    2017-05-01

    Security analysts are tasked with identifying and mitigating network service vulnerabilities. A common problem associated with in-depth testing of network protocols is the availability of software that communicates across disparate protocols. Many times, the software required to communicate with these services is not publicly available. Developing this software is a time-consuming undertaking that requires expertise and understanding of the protocol specification. The work described in this paper aims at developing a software package that is capable of automatically creating communication clients by using packet capture (pcap) and TShark dissectors. Currently, our focus is on simple protocols with fixed fields. The methodologies developed as part of this work will extend to other complex protocols such as the Gateway Load Balancing Protocol (GLBP), Port Aggregation Protocol (PAgP), and Open Shortest Path First (OSPF). Thus far, we have architected a modular pipeline for an automatic traffic-based software generator. We start the transformation of captured network traffic by employing TShark to convert packets into a Packet Details Markup Language (PDML) file. The PDML file contains a parsed, textual, representation of the packet data. Then, we extract field data, types, along with inter and intra-packet dependencies. This information is then utilized to construct an XML file that encompasses the protocol state machine and field vocabulary. Finally, this XML is converted into executable code. Using our methodology, and as a starting point, we have succeeded in automatically generating software that communicates with other hosts using an automatically generated Internet Control Message Protocol (ICMP) client program.

  2. MAS architecture and knowledge model for vehicles data communication

    Directory of Open Access Journals (Sweden)

    René MANDIAU

    2013-07-01

    Full Text Available Normal 0 21 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US;} Completely autonomous vehicles in traffic should allow to decrease the number of road accident victims greatly, and should allow gains in terms of performance and economy. Modelling the vehicles interaction, and especially knowledge sharing, is one of the main challenges to optimize traffic flow with autonomous vehicles. We propose in this paper a model of knowledge communication between mobile agents on a traffic network. The model of knowledge and of interaction enables to propagate new knowledge without overloading the system with a too large number of communications. For that, only the new knowledge is communicated, and two agents communicate the same knowledge only once. Moreover, in order to allow agents to update their knowledge (perceived or created, a notion of degradation is used. A simulator has been built to evaluate the proposal, before to implement it in mobile robots. Some results of the simulator are proposed in this article.

  3. Organization as Process of Communication

    DEFF Research Database (Denmark)

    Schoeneborn, Dennis; Vasquez, Consuelo; Cornelissen, Joep

    Within process views on organization, one central question is how organizations (as entities) are constituted by processes (i.e. non-entities). The answer to this question depends on the ways in which organizational scholars imagine organization, e.g., through rhetorical figures like metaphors or...

  4. A Cognitive Neural Architecture Able to Learn and Communicate through Natural Language.

    Science.gov (United States)

    Golosio, Bruno; Cangelosi, Angelo; Gamotina, Olesya; Masala, Giovanni Luca

    2015-01-01

    Communicative interactions involve a kind of procedural knowledge that is used by the human brain for processing verbal and nonverbal inputs and for language production. Although considerable work has been done on modeling human language abilities, it has been difficult to bring them together to a comprehensive tabula rasa system compatible with current knowledge of how verbal information is processed in the brain. This work presents a cognitive system, entirely based on a large-scale neural architecture, which was developed to shed light on the procedural knowledge involved in language elaboration. The main component of this system is the central executive, which is a supervising system that coordinates the other components of the working memory. In our model, the central executive is a neural network that takes as input the neural activation states of the short-term memory and yields as output mental actions, which control the flow of information among the working memory components through neural gating mechanisms. The proposed system is capable of learning to communicate through natural language starting from tabula rasa, without any a priori knowledge of the structure of phrases, meaning of words, role of the different classes of words, only by interacting with a human through a text-based interface, using an open-ended incremental learning process. It is able to learn nouns, verbs, adjectives, pronouns and other word classes, and to use them in expressive language. The model was validated on a corpus of 1587 input sentences, based on literature on early language assessment, at the level of about 4-years old child, and produced 521 output sentences, expressing a broad range of language processing functionalities.

  5. A Cognitive Neural Architecture Able to Learn and Communicate through Natural Language.

    Directory of Open Access Journals (Sweden)

    Bruno Golosio

    Full Text Available Communicative interactions involve a kind of procedural knowledge that is used by the human brain for processing verbal and nonverbal inputs and for language production. Although considerable work has been done on modeling human language abilities, it has been difficult to bring them together to a comprehensive tabula rasa system compatible with current knowledge of how verbal information is processed in the brain. This work presents a cognitive system, entirely based on a large-scale neural architecture, which was developed to shed light on the procedural knowledge involved in language elaboration. The main component of this system is the central executive, which is a supervising system that coordinates the other components of the working memory. In our model, the central executive is a neural network that takes as input the neural activation states of the short-term memory and yields as output mental actions, which control the flow of information among the working memory components through neural gating mechanisms. The proposed system is capable of learning to communicate through natural language starting from tabula rasa, without any a priori knowledge of the structure of phrases, meaning of words, role of the different classes of words, only by interacting with a human through a text-based interface, using an open-ended incremental learning process. It is able to learn nouns, verbs, adjectives, pronouns and other word classes, and to use them in expressive language. The model was validated on a corpus of 1587 input sentences, based on literature on early language assessment, at the level of about 4-years old child, and produced 521 output sentences, expressing a broad range of language processing functionalities.

  6. Towards a Standard Mixed-Signal Parallel Processing Architecture for Miniature and Microrobotics.

    Science.gov (United States)

    Sadler, Brian M; Hoyos, Sebastian

    2014-01-01

    The conventional analog-to-digital conversion (ADC) and digital signal processing (DSP) architecture has led to major advances in miniature and micro-systems technology over the past several decades. The outlook for these systems is significantly enhanced by advances in sensing, signal processing, communications and control, and the combination of these technologies enables autonomous robotics on the miniature to micro scales. In this article we look at trends in the combination of analog and digital (mixed-signal) processing, and consider a generalized sampling architecture. Employing a parallel analog basis expansion of the input signal, this scalable approach is adaptable and reconfigurable, and is suitable for a large variety of current and future applications in networking, perception, cognition, and control.

  7. Application of Multiprotocol Medical Imaging Communications and an Extended DICOM WADO Service in a Teleradiology Architecture

    Directory of Open Access Journals (Sweden)

    George V. Koutelakis

    2012-01-01

    Full Text Available Multiprotocol medical imaging communication through the Internet is more flexible than the tight DICOM transfers. This paper introduces a modular multiprotocol teleradiology architecture that integrates DICOM and common Internet services (based on web, FTP, and E-mail into a unique operational domain. The extended WADO service (a web extension of DICOM and the other proposed services allow access to all levels of the DICOM information hierarchy as opposed to solely Object level. A lightweight client site is considered adequate, because the server site of the architecture provides clients with service interfaces through the web as well as invulnerable space for temporary storage, called as User Domains, so that users fulfill their applications' tasks. The proposed teleradiology architecture is pilot implemented using mainly Java-based technologies and is evaluated by engineers in collaboration with doctors. The new architecture ensures flexibility in access, user mobility, and enhanced data security.

  8. Low latency on chip communication based on hybrid NOC Architecture using X-Y router

    Directory of Open Access Journals (Sweden)

    Tejas wini Deotare

    2014-05-01

    Full Text Available On-chip co mmunication has two different type of architecture which can be classified as Bus and mesh based Networks- on-Chip (No C. Each of them has diffe rent features and applications. In this paper, we construct the hybrid architecture with using bus and mesh NOC architecture. In the hybrid architecture, heavy communication affinity IPcores are placed in the same subsystem. and this large mesh No C get partitioned into several subsystems and one on one individual IPs, so that there is the reduction in the transmission latency of NoC.Efficient partition and mapping algorith m is proposed for reduction of the latency on the hybrid NOC arch itecture.It shows that an average latency improvement of 17.6% and more can be obtained when compared with the conventional mesh No C arch itecture.

  9. Fiber-wireless convergence in next-generation communication networks systems, architectures, and management

    CERN Document Server

    Chang, Gee-Kung; Ellinas, Georgios

    2017-01-01

    This book investigates new enabling technologies for Fi-Wi convergence. The editors discuss Fi-Wi technologies at the three major network levels involved in the path towards convergence: system level, network architecture level, and network management level. The main topics will be: a. At system level: Radio over Fiber (digitalized vs. analogic, standardization, E-band and beyond) and 5G wireless technologies; b. Network architecture level: NGPON, WDM-PON, BBU Hotelling, Cloud Radio Access Networks (C-RANs), HetNets. c. Network management level: SDN for convergence, Next-generation Point-of-Presence, Wi-Fi LTE Handover, Cooperative MultiPoint. • Addresses the Fi-Wi convergence issues at three different levels, namely at the system level, network architecture level, and network management level • Provides approaches in communication systems, network architecture, and management that are expected to steer the evolution towards fiber-wireless convergence • Contributions from leading experts in the field of...

  10. Hybrid Global Communication Architecture with Balloons and Satellites

    Science.gov (United States)

    Pignolet, G.; Celeste, A.; Erb, B.

    2002-01-01

    Global space communication systems have been developed now for more than three decades, based mainly on geostationary satellites or almost equivalent systems such as the Molnya orbit concepts. The last decade of the twentieth century has seen the emergence of satellite constellations in low or medium Earth orbit, in order to improve accessibility in terms of visibility at higher latitudes and limited size or power requirement for ground equipment. However such systems are complex to operate, there are still many situations where connection may remain difficult to achieve, and commercial benefits are still to be proven. A new concept, using a network combination of geostationary relay satellites and high altitude stratospheric platforms may well overcome the inconveniences of both geostationary systems and satellite constellations to improve greatly global communication in the future. The emergence of enabling technologies developed in Japan and in several other countries will soon make it possible to fly helium balloons in the upper layers of the atmosphere, at altitudes of 20 km or more. At such an altitude, well above the meteorological disturbances and the jet-streams, the stratosphere enjoys a regular wind at moderate speeds ranging between 10 m/s and 30 m/s, depending on latitude and also on season. It is possible for balloons powered by electric engines to fly non- stop upstream of the wind in order to remain stationary above a particular location. Large balloons, with sizes up to 300 m in length, would be able to carry sub-satellite communication payloads, as well as observation apparatus and scientific equipment. The range of visibility for easy both-way communication between the balloon and operators or customers on the ground could be as large as 200 km in radius. Most current studies consider a combination of solar cells and storage batteries to power the balloons, but microwave beam wireless power transportation from the ground could be a very

  11. Image processing and communications challenges 5

    CERN Document Server

    2014-01-01

    This textbook collects a series of research papers in the area of Image Processing and Communications which not only introduce a summary of current technology but also give an outlook of potential feature problems in this area. The key objective of the book is to provide a collection of comprehensive references on some recent theoretical development as well as novel applications in image processing and communications. The book is divided into two parts. Part I deals with image processing. A comprehensive survey of different methods  of image processing, computer vision  is also presented. Part II deals with the telecommunications networks and computer networks. Applications in these areas are considered. In conclusion, the edited book comprises papers on diverse aspects of image processing  and communications systems. There are theoretical aspects as well as application papers.

  12. Architectural design of heterogeneous metallic nanocrystals--principles and processes.

    Science.gov (United States)

    Yu, Yue; Zhang, Qingbo; Yao, Qiaofeng; Xie, Jianping; Lee, Jim Yang

    2014-12-16

    CONSPECTUS: Heterogeneous metal nanocrystals (HMNCs) are a natural extension of simple metal nanocrystals (NCs), but as a research topic, they have been much less explored until recently. HMNCs are formed by integrating metal NCs of different compositions into a common entity, similar to the way atoms are bonded to form molecules. HMNCs can be built to exhibit an unprecedented architectural diversity and complexity by programming the arrangement of the NC building blocks ("unit NCs"). The architectural engineering of HMNCs involves the design and fabrication of the architecture-determining elements (ADEs), i.e., unit NCs with precise control of shape and size, and their relative positions in the design. Similar to molecular engineering, where structural diversity is used to create more property variations for application explorations, the architectural engineering of HMNCs can similarly increase the utility of metal NCs by offering a suite of properties to support multifunctionality in applications. The architectural engineering of HMNCs calls for processes and operations that can execute the design. Some enabling technologies already exist in the form of classical micro- and macroscale fabrication techniques, such as masking and etching. These processes, when used singly or in combination, are fully capable of fabricating nanoscopic objects. What is needed is a detailed understanding of the engineering control of ADEs and the translation of these principles into actual processes. For simplicity of execution, these processes should be integrated into a common reaction system and yet retain independence of control. The key to architectural diversity is therefore the independent controllability of each ADE in the design blueprint. The right chemical tools must be applied under the right circumstances in order to achieve the desired outcome. In this Account, after a short illustration of the infinite possibility of combining different ADEs to create HMNC design

  13. Communication Network Architectures Based on Ethernet Passive Optical Network for Offshore Wind Power Farms

    Directory of Open Access Journals (Sweden)

    Mohamed A. Ahmed

    2016-03-01

    Full Text Available Nowadays, with large-scale offshore wind power farms (WPFs becoming a reality, more efforts are needed to maintain a reliable communication network for WPF monitoring. Deployment topologies, redundancy, and network availability are the main items to enhance the communication reliability between wind turbines (WTs and control centers. Traditional communication networks for monitoring and control (i.e., supervisory control and data acquisition (SCADA systems using switched gigabit Ethernet will not be sufficient for the huge amount of data passing through the network. In this paper, the optical power budget, optical path loss, reliability, and network cost of the proposed Ethernet Passive Optical Network (EPON-based communication network for small-size offshore WPFs have been evaluated for five different network architectures. The proposed network model consists of an optical network unit device (ONU deployed on the WT side for collecting data from different internal networks. All ONUs from different WTs are connected to a central optical line terminal (OLT, placed in the control center. There are no active electronic elements used between the ONUs and the OLT, which reduces the costs and complexity of maintenance and deployment. As fiber access networks without any protection are characterized by poor reliability, three different protection schemes have been configured, explained, and discussed. Considering the cost of network components, the total implementation expense of different architectures with, or without, protection have been calculated and compared. The proposed network model can significantly contribute to the communication network architecture for next generation WPFs.

  14. A Distributed Middleware Architecture for Attack-Resilient Communications in Smart Grids

    Energy Technology Data Exchange (ETDEWEB)

    Hodge, Brian S [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wu, Yifu [University of Akron; Wei, Jin [University of Akron

    2017-07-31

    Distributed Energy Resources (DERs) are being increasingly accepted as an excellent complement to traditional energy sources in smart grids. As most of these generators are geographically dispersed, dedicated communications investments for every generator are capital cost prohibitive. Real-time distributed communications middleware, which supervises, organizes and schedules tremendous amounts of data traffic in smart grids with high penetrations of DERs, allows for the use of existing network infrastructure. In this paper, we propose a distributed attack-resilient middleware architecture that detects and mitigates the congestion attacks by exploiting the Quality of Experience (QoE) measures to complement the conventional Quality of Service (QoS) information to detect and mitigate the congestion attacks effectively. The simulation results illustrate the efficiency of our proposed communications middleware architecture.

  15. A Distributed Middleware Architecture for Attack-Resilient Communications in Smart Grids: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Yifu; Wei, Jin; Hodge, Bri-Mathias

    2017-05-24

    Distributed energy resources (DERs) are being increasingly accepted as an excellent complement to traditional energy sources in smart grids. Because most of these generators are geographically dispersed, dedicated communications investments for every generator are capital-cost prohibitive. Real-time distributed communications middleware - which supervises, organizes, and schedules tremendous amounts of data traffic in smart grids with high penetrations of DERs - allows for the use of existing network infrastructure. In this paper, we propose a distributed attack-resilient middleware architecture that detects and mitigates the congestion attacks by exploiting the quality of experience measures to complement the conventional quality of service information to effectively detect and mitigate congestion attacks. The simulation results illustrate the efficiency of our proposed communications middleware architecture.

  16. Information Systems’ Portfolio: Contributions of Enterprise and Process Architecture

    Directory of Open Access Journals (Sweden)

    Silvia Fernandes

    2017-09-01

    Full Text Available We are witnessing a need for a quick and intelligent reaction from organizations to the level and speed of change in business processes.New information technologies and systems (IT/IS are challenging business models and products. One of the great shakes comes from the online and/or mobile apps and platforms.These are having a tremendous impact in launching innovative and competitive services through the combination of digital and physical features. This leads to actively rethink enterprise information systems’ portfolio, its management and suitability. One relevant way for enterprises to manage their IT/IS in order to cope with those challenges is enterprise and process architecture. A decision-making culture based on processes helps to understand and define the different elements that shape an organization and how those elements inter-relate inside and outside it. IT/IS portfolio management requires an increasing need of modeling data and process flows for better discerning and acting at its selection and alignment with business goals. The new generation of enterprise architecture (NGEA helps to design intelligent processes that answer quickly and creatively to new and challenging trends. This has to be open, agile and context-aware to allow well-designed services that match users’ expectations. This study includes two real cases/problems to solve quickly in companies and solutions are presented in line with this architectural approach.

  17. Signal processing for mobile communications handbook

    CERN Document Server

    Ibnkahla, Mohamed

    2004-01-01

    INTRODUCTIONSignal Processing for Future Mobile Communications Systems: Challenges and Perspectives; Quazi Mehbubar Rahman and Mohamed IbnkahlaCHANNEL MODELING AND ESTIMATIONMultipath Propagation Models for Broadband Wireless Systems; Andreas F. Molisch and Fredrik TufvessonModeling and Estimation of Mobile Channels; Jitendra K. TugnaitMobile Satellite Channels: Statistical Models and Performance Analysis; Giovanni E. Corazza, Alessandro Vanelli-Coralli, Raffaella Pedone, and Massimo NeriMobile Velocity Estimation for Wireless Communications; Bouchra Senadji, Ghazem Azemi, and Boualem Boashash

  18. The Architecture of the Laser Communications Relay Demonstration Ground Stations: An Overview

    Science.gov (United States)

    Moores, John D.; Wilson, Keith E.

    2013-01-01

    NASA's Laser Communication Relay Demonstration (LCRD) will be NASA's first long-duration demonstration of laser communications (lasercom) in space, providing geosynchronous-satellite-hosted bidirectional relay services between two Earth ground stations. LCRD will leverage and enhance existing ground stations. Ground Station 1 (GS-1) will leverage the Optical Communications Telescope Laboratory (OCTL) built by JPL, while Ground Station 2 (GS-2) will leverage the Lunar Laser Communications Demonstration (LLCD) Ground Terminal (LLGT) built by MIT Lincoln Laboratory. While each ground system has unique telescopes and integrated optics, many of the backend subsystems (e.g., communications, environmental monitoring, control, user simulators) will be common to both terminals. Here we provide an overview of the architecture of the LCRD ground stations, and the planned enhancements to the existing facilities.

  19. Invited Article: Polarization diversity and modulation for high-speed optical communications: architectures and capacity

    Directory of Open Access Journals (Sweden)

    William Shieh

    2016-07-01

    Full Text Available Polarization is one of the fundamental properties of optical waves. To cope with the exponential growth of the Internet traffic, optical communications has advanced by leaps and bounds within the last decade. For the first time, the polarization domain has been extensively explored for high-speed optical communications. In this paper, we discuss the general principle of polarization modulation in both Jones and Stokes spaces. We show that there is no linear optical device capable of transforming an arbitrary input polarization into one that is orthogonal to itself. This excludes the receiver self-polarization diversity architecture by splitting the signal into two branches, and then transferring one of the branches into orthogonal polarization. We next propose a novel Stokes vector (SV detection architecture using four single-ended photodiodes (PD that can recover a full set of SV. We then derive a closed-form expression for the information capacity of different SV detection architectures and compare the capacity of our proposed architectures with that of intensity-modulated directly-detected (IM/DD method. We next study the 3-PD SV detection architecture where a subset of SV is detected, and devise a novel modulation algorithm that can achieve 2-dimensional modulation with the 3-PD detection. By using cost-effective SV receivers, polarization modulation and multiplexing offers a powerful solution for short-reach optical networks where the wavelength domain is quickly exhausted.

  20. Invited Article: Polarization diversity and modulation for high-speed optical communications: architectures and capacity

    Science.gov (United States)

    Shieh, William; Khodakarami, Hamid; Che, Di

    2016-07-01

    Polarization is one of the fundamental properties of optical waves. To cope with the exponential growth of the Internet traffic, optical communications has advanced by leaps and bounds within the last decade. For the first time, the polarization domain has been extensively explored for high-speed optical communications. In this paper, we discuss the general principle of polarization modulation in both Jones and Stokes spaces. We show that there is no linear optical device capable of transforming an arbitrary input polarization into one that is orthogonal to itself. This excludes the receiver self-polarization diversity architecture by splitting the signal into two branches, and then transferring one of the branches into orthogonal polarization. We next propose a novel Stokes vector (SV) detection architecture using four single-ended photodiodes (PD) that can recover a full set of SV. We then derive a closed-form expression for the information capacity of different SV detection architectures and compare the capacity of our proposed architectures with that of intensity-modulated directly-detected (IM/DD) method. We next study the 3-PD SV detection architecture where a subset of SV is detected, and devise a novel modulation algorithm that can achieve 2-dimensional modulation with the 3-PD detection. By using cost-effective SV receivers, polarization modulation and multiplexing offers a powerful solution for short-reach optical networks where the wavelength domain is quickly exhausted.

  1. Spatialization of social process vs singular object of architecture

    Directory of Open Access Journals (Sweden)

    Lujak Mihailo

    2010-01-01

    Full Text Available The fundamental subject of this research is spatialization of social process in the period of modernism manifested through transformation and/or change in meaning of space under a variety of social processes without changing the physical structure of space. These changes in meaning represent the specificity of development in space under the influence of the said social processes, which in this case is Yugoslav modernism, resulting in the creation of a singular object of architecture specific of a certain environment. These processes have been researched in the residential complex of Block 19a in New Belgrade, designed by architects Milan Lojanica, Predrag Cagić, and Borivoje Jovanović, and constructed between 1975 and 1982. The basic objective of this paper is to establish crucial causes for this complex to be considered the landmark in the designing practice of the time in Yugoslavia through research and critical analysis of the residential complex of Block 19a, and to try and determine the importance and potential influence in further architectural development in the period following its construction. In other words, the basic objective of this paper is to establish whether residential complex Block 19a represents a singular object of architecture in Yugoslavia/Serbia.

  2. An Architecture of Deterministic Quantum Central Processing Unit

    OpenAIRE

    Xue, Fei; Chen, Zeng-Bing; Shi, Mingjun; Zhou, Xianyi; Du, Jiangfeng; Han, Rongdian

    2002-01-01

    We present an architecture of QCPU(Quantum Central Processing Unit), based on the discrete quantum gate set, that can be programmed to approximate any n-qubit computation in a deterministic fashion. It can be built efficiently to implement computations with any required accuracy. QCPU makes it possible to implement universal quantum computation with a fixed, general purpose hardware. Thus the complexity of the quantum computation can be put into the software rather than the hardware.

  3. A novel digital pulse processing architecture for nuclear instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Moline, Yoann; Thevenin, Mathieu; Corre, Gwenole [CEA, LIST - Laboratoire Capteurs et Architectures electroniques, F-91191 Gif-sur-Yvette, (France); Paindavoine, Michel [CNRS, Universite de Bourgogne - Laboratoire d' Etude de l' Apprentissage et du Developpement, 21000 DIJON, (France)

    2015-07-01

    The field of nuclear instrumentation covers a wide range of applications, including counting, spectrometry, pulse shape discrimination and multi-channel coincidence. These applications are the topic of many researches, new algorithms and implementations are constantly proposed thanks to advances in digital signal processing. However, these improvements are not yet implemented in instrumentation devices. This is especially true for neutron-gamma discrimination applications which traditionally use charge comparison method while literature proposes other algorithms based on frequency domain or wavelet theory which show better performances. Another example is pileups which are generally rejected while pileup correction algorithms also exist. These processes are traditionally performed offline due to two issues. The first is the Poissonian characteristic of the signal, composed of random arrival pulses which requires to current architectures to work in data flow. The second is the real-time requirement, which implies losing pulses when the pulse rate is too high. Despite the possibility of treating the pulses independently from each other, current architectures paralyze the acquisition of the signal during the processing of a pulse. This loss is called dead-time. These two issues have led current architectures to use dedicated solutions based on re-configurable components like Field Programmable Gate Arrays (FPGAs) to overcome the need of performance necessary to deal with dead-time. However, dedicated hardware algorithm implementations on re-configurable technologies are complex and time-consuming. For all these reasons, a programmable Digital pulse Processing (DPP) architecture in a high level language such as Cor C++ which can reduce dead-time would be worthwhile for nuclear instrumentation. This would reduce prototyping and test duration by reducing the level of hardware expertise to implement new algorithms. However, today's programmable solutions do not meet

  4. SKOPE A connectionist/symbolic architecture of spoken Korean processing

    CERN Document Server

    Lee, G; Lee, Geunbae; Lee, Jong-Hyeok

    1995-01-01

    Spoken language processing requires speech and natural language integration. Moreover, spoken Korean calls for unique processing methodology due to its linguistic characteristics. This paper presents SKOPE, a connectionist/symbolic spoken Korean processing engine, which emphasizes that: 1) connectionist and symbolic techniques must be selectively applied according to their relative strength and weakness, and 2) the linguistic characteristics of Korean must be fully considered for phoneme recognition, speech and language integration, and morphological/syntactic processing. The design and implementation of SKOPE demonstrates how connectionist/symbolic hybrid architectures can be constructed for spoken agglutinative language processing. Also SKOPE presents many novel ideas for speech and language processing. The phoneme recognition, morphological analysis, and syntactic analysis experiments show that SKOPE is a viable approach for the spoken Korean processing.

  5. A Networked Perspective on the Engineering Design Process: At the Intersection of Process and Organisation Architectures

    DEFF Research Database (Denmark)

    Parraguez, Pedro

    projects often fail to be on time, on budget, and meeting specifications. Despite the wealth of process models available, previous approaches have been insufficient to provide a networked perspective that allows the challenging combination of organisational and process complexity to unfold. The lack...... the process. This combination of process structure—how people and activities are connected—and composition—the functional diversity of the groups participating in the process—is referred to as the actual design process architecture. This thesis reports on research undertaken to develop, apply and test......-driven reflection of the relationship between process architecture and performance, and to provide the means to compare process plans against the actual process. The framework is based on a multi-domain network approach to process architecture and draws on previous research using matrix-based and graph...

  6. Lambda Data Grid: Communications Architecture in Support of Grid Computing

    Science.gov (United States)

    2006-12-21

    Neena Kaushik and Professor Silvia Figueira for her input and review of publications. My gratitude to Professor Cees De Latt and his students for the...conference floor in Pittsburg. For technology demonstrations, Cees De Latt [37] described the previous standard process of provisioning 10Gbs from Amsterdam...services, and state of the art developments. We further discuss related work and point out how our research on the DWDM-RAM project is distinguished

  7. Next-Generation Ground Network Architecture for Communications and Tracking of Interplanetary Smallsats

    Science.gov (United States)

    Cheung, K.-M.; Abraham, D.; Arroyo, B.; Basilio, E.; Babuscia, A.; Duncan, C.; Lee, D.; Oudrhiri, K.; Pham, T.; Staehle, R.; Waldherr, S.; Welz, G.; Wyatt, J.; Lanucara, M.; Malphrus, B.; Bellardo, J.; Puig-Suari, J.; Corpino, S.

    2015-08-01

    As small spacecraft venture out of Earth orbit, they will encounter challenges not experienced or addressed by the numerous low Earth orbit (LEO) CubeSat and smallsat missions staged to date. The LEO CubeSats typically use low-cost, proven CubeSat radios, antennas, and university ground stations with small apertures. As more ambitious yet cost-constrained space mission concepts to the Moon and beyond are being developed, CubeSats and smallsats have the potential to provide a more affordable platform for exploring deep space and performing the associated science. Some of the challenges that have, so far, slowed the proliferation of small interplanetary spacecraft are those of communications and navigation. Unlike Earth-orbiting spacecraft that navigate via government services such as North American Aerospace Defense Command's (NORAD's) tracking elements or the Global Positioning Satellite (GPS) system, interplanetary spacecraft would have to operate in a fundamentally different manner that allows the deep-space communications link to provide both command/telemetry and the radiometric data needed for navigation. Another challenge occurs when smallsat and CubeSat missions would involve multiple spacecraft that require near-simultaneous communication and/or navigation, but have a very limited number of ground antenna assets, as well as available spectrum, to support their links. To address these challenges, the Jet Propulsion Laboratory (JPL) and the Deep Space Network (DSN) it operates for NASA are pursuing the following efforts: (1) Developing a CubeSat-compatible, DSN-compatible transponder -- Iris -- which a commercial vendor can then make available as a product line. (2) Developing CubeSat-compatible high-gain antennas -- deployable reflectors, reflectarrays, and inflatable antennas. (3) Streamlining access and utilization processes for DSN and related services such as the Advanced Multi-Mission Operations System (AMMOS). (4) Developing methodologies for tracking

  8. Impact of the Use of Object Request Broker Middleware for Inter-Component Communications in C6416 Digital Signal Processor Based Software Communications Architecture Radio Systems

    Directory of Open Access Journals (Sweden)

    Mohamed I. Yousef

    2012-01-01

    Full Text Available Problem statement: This study presents an in-depth analysis of the performance of Software Communications Architecture (SCA component-based waveform applications in terms of inter-component communications. The main limitation with SCA, in the context of embedded systems, is the additional cost introduced by the use of Object Request Broker (ORB middleware. The ORB middleware handles the interaction between components and objects in SCA distributed environment. This interaction should be highly efficient, due to the real time nature of SCA systems and transparent to the application programmer. Approach: We can achieve high efficiency in SCA systems by enhancing the Inter-Process Communications (IPC mechanisms in Operating systems (OS micro kernels, while we achieve transparency through Interface Definition Language (IDL. Different encoding mechanisms like “External Data Representation (XDR, Network Data Representation (NDR and Common Data Representation (CDR facilitate inter-component communication transparently and efficiently”. Marshalling procedures format data from the local machine representation to common network representations. A most common encoding mechanism for Common Object Request Broker Architecture (CORBA systems is CDR representation. Measurements have been performed with ORBExpress DSP as a CORBA distribution and Open Source SCA Implementation Embedded (OSSIE for SCA implementation. In order to perform these measurements we proposed two metrics for profiling the ORB that are invocation and marshalling. In addition, we propose three elements of data types to evaluate the performance of ORB middleware that are, Basic, Array and Sequence data types. Results: The CORBA bus is really the part, which brings an overhead to the SCA radio systems. This overhead is due to method invocations that have been carried out by ORB middleware. Conclusion: Performance benchmarks of ORBExpress DSP middleware show that, although using CORBA for

  9. A P2P Architecture to Support Mobile Real-Time Multimedia Communications

    Directory of Open Access Journals (Sweden)

    Daniel G. Costa

    2010-10-01

    Full Text Available A new SIP standard based on peer to peer paradigm allows the keeping of user localization information in a decentralized way, adding flexibility to real-time mobile communications. Despite specification of terminal mobility in P2PSIP, handover procedures in transport-layer have better performance when compared with solutions in application-layer of Internet. SCTP transport protocol supports handover and a partial reliable communication service. Putting together P2PSIP and SCTP extensions, an end-to-end architecture can be proposed, aimed at the support of real-time multimedia applications with mobility requirements.

  10. Research on the Architecture of a Basic Reconfigurable Information Communication Network

    Directory of Open Access Journals (Sweden)

    Ruimin Wang

    2013-01-01

    Full Text Available The current information network cannot fundamentally meet some urgent requirements, such as providing ubiquitous information services and various types of heterogeneous network, supporting diverse and comprehensive network services, possessing high quality communication effects, ensuring the security and credibility of information interaction, and implementing effective supervisory control. This paper provides the theory system for the basic reconfigurable information communication network based on the analysis of present problems on the Internet and summarizes the root of these problems. It also provides an in-depth discussion about the related technologies and the prime components of the architecture.

  11. 3GPP SA2 architecture and functions for 5G mobile communication system

    Directory of Open Access Journals (Sweden)

    Junseok Kim

    2017-03-01

    Full Text Available The on-going development of Fifth Generation (5G mobile communication technology will be the cornerstone for applying Information and Communication Technology (ICT to various fields, e.g., smart city, smart home, connected car, etc. The 3rd Generation Partnership Project (3GPP, which has developed the most successful standard technologies in the mobile communication market such as Universal Mobile Telecommunication System (UMTS and Long Term Evolution (LTE, is currently carrying out the standardization of both 5G access network system and 5G core network system at the same time. Within 3GPP, Service and System Aspects Working Group 2 (SA2 is responsible for identifying the main functions and entities of the network. In December 2016, the 3GPP SA2 group finalized the first phase of study for the architecture and main functions of 5G mobile communication system under the study item of Next Generation system (NextGen. Currently, normative standardization is on-going based on the agreements made in the NextGen Phase 1 study. In this paper, we present the architecture and functions of 5G mobile communication system agreed in the NextGen study.

  12. The start up as a phase of architectural design process.

    Science.gov (United States)

    Castro, Iara Sousa; Lima, Francisco de Paula Antunes; Duarte, Francisco José de Castro Moura

    2012-01-01

    Alterations made in the architectural design can be considered as a continuous process, from its conception to the moment a built environment is already in use. This article focuses on the "moving phase", which is the initial moment of the environment occupation and the start-up of services. It aims to show that the continuity of ergonomics interventions during the "moving phase" or start up may reveal the built environment inadequacies; clearly showing needs not met by the design and allowing making instant decisions to solve non-foreseen problems. The results have revealed some lessons experienced by users during a critical stage not usually included in the design process.

  13. COMPLEX THINKING IN THE PROCESS OF LEARNING ARCHITECTURAL COMPOSITION

    Directory of Open Access Journals (Sweden)

    Špela Hudnik

    2013-12-01

    Full Text Available In the learning process which aim is developing original creativity, has its central role complex thinking. This is important for the sensibilisation and intensification of the individual creative abilities. Multidisciplinary approach, various mind strategies and techniques of creating and resolving problems encourage by the individual and the group creativity, innovation, teamwork and critical thinking. The article represents four examples of the process in which new creative ideas, translated into complex graphical compositions representing the combination of architectural and fine arts contents, experience, ethical and esthetical sensitivity, existential self-awareness and the holistic personal development, are born.

  14. Critical zone architecture and processes: a geophysical perspective

    Science.gov (United States)

    Holbrook, W. S.

    2016-12-01

    The "critical zone (CZ)," Earth's near-surface layer that reaches from treetop to bedrock, sustains terrestrial life by storing water and producing nutrients. Despite is central importance, however, the CZ remains poorly understood, due in part to the complexity of interacting biogeochemical and physical processes that take place there, and in part due to the difficulty of measuring CZ properties and processes at depth. Major outstanding questions include: What is the architecture of the CZ? How does that architecture vary across scales and across gradients in climate, lithology, topography, biology and regional states of stress? What processes control the architecture of the CZ? At what depth does weathering initiate, and what controls the rates at which it proceeds? Based on recent geophysical campaigns at seven Critical Zone Observatory (CZO) sites and several other locations, a geophysical perspective on CZ architecture and processes is emerging. CZ architecture can be usefully divided into four layers, each of which has distinct geophysical properties: soil, saprolite, weathered bedrock and protolith. The distribution of those layers across landscapes varies depending on protolith composition and internal structure, topography, climate (P/T) and the regional state of stress. Combined observations from deep CZ drilling, geophysics and geochemistry demonstrate that chemical weathering initiates deep in the CZ, in concert with mechanical weathering (fracturing), as chemical weathering appears concentrated along fractures in borehole walls. At the Calhoun CZO, the plagioclase weathering front occurs at nearly 40 m depth, at the base of a 25-m-thick layer of weathered bedrock. The principal boundary in porosity, however, occurs at the saprolite/weathered bedrock boundary: porosity decreases over an order of magnitude, from 50% to 5% over an 8-m-thick zone at the base of saprolite. Porosity in weathered bedrock is between 2-5%. Future progress will depend on (1

  15. A flexible software architecture for scalable real-time image and video processing applications

    Science.gov (United States)

    Usamentiaga, Rubén; Molleda, Julio; García, Daniel F.; Bulnes, Francisco G.

    2012-06-01

    Real-time image and video processing applications require skilled architects, and recent trends in the hardware platform make the design and implementation of these applications increasingly complex. Many frameworks and libraries have been proposed or commercialized to simplify the design and tuning of real-time image processing applications. However, they tend to lack flexibility because they are normally oriented towards particular types of applications, or they impose specific data processing models such as the pipeline. Other issues include large memory footprints, difficulty for reuse and inefficient execution on multicore processors. This paper presents a novel software architecture for real-time image and video processing applications which addresses these issues. The architecture is divided into three layers: the platform abstraction layer, the messaging layer, and the application layer. The platform abstraction layer provides a high level application programming interface for the rest of the architecture. The messaging layer provides a message passing interface based on a dynamic publish/subscribe pattern. A topic-based filtering in which messages are published to topics is used to route the messages from the publishers to the subscribers interested in a particular type of messages. The application layer provides a repository for reusable application modules designed for real-time image and video processing applications. These modules, which include acquisition, visualization, communication, user interface and data processing modules, take advantage of the power of other well-known libraries such as OpenCV, Intel IPP, or CUDA. Finally, we present different prototypes and applications to show the possibilities of the proposed architecture.

  16. Architectural Prototyping

    DEFF Research Database (Denmark)

    Bardram, Jakob; Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2004-01-01

    ' concerns with respect to a system under development. An architectural prototype is primarily a learning and communication vehicle used to explore and experiment with alternative architectural styles, features, and patterns in order to balance different architectural qualities. The use of architectural......A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders...

  17. Disjunctive Information Flow for Communicating Processes

    DEFF Research Database (Denmark)

    Li, Ximeng; Nielson, Flemming; Nielson, Hanne Riis

    2016-01-01

    The security validation of practical computer systems calls for the ability to specify and verify information flow policies that are dependent on data content. Such policies play an important role in concurrent, communicating systems: consider a scenario where messages are sent to different...... processes according to their tagging. We devise a security type system that enforces content-dependent information flow policies in the presence of communication and concurrency. The type system soundly guarantees a compositional noninterference property. All theoretical results have been formally proved...

  18. Image processing methods and architectures in diagnostic pathology.

    Directory of Open Access Journals (Sweden)

    Oscar DĂŠniz

    2010-05-01

    Full Text Available Grid technology has enabled the clustering and the efficient and secure access to and interaction among a wide variety of geographically distributed resources such as: supercomputers, storage systems, data sources, instruments and special devices and services. Their main applications include large-scale computational and data intensive problems in science and engineering. General grid structures and methodologies for both software and hardware in image analysis for virtual tissue-based diagnosis has been considered in this paper. This methods are focus on the user level middleware. The article describes the distributed programming system developed by the authors for virtual slide analysis in diagnostic pathology. The system supports different image analysis operations commonly done in anatomical pathology and it takes into account secured aspects and specialized infrastructures with high level services designed to meet application requirements. Grids are likely to have a deep impact on health related applications, and therefore they seem to be suitable for tissue-based diagnosis too. The implemented system is a joint application that mixes both Web and Grid Service Architecture around a distributed architecture for image processing. It has shown to be a successful solution to analyze a big and heterogeneous group of histological images under architecture of massively parallel processors using message passing and non-shared memory.

  19. Architectures for enabling flexible business processes : A research agenda

    NARCIS (Netherlands)

    Overbeek, S.J.; Gong, Y.

    2010-01-01

    For decades, information systems have been designed for controlling and managing business processes. In the past, these systems were often monolithic in nature and not made for interacting and communicating with other systems. Today, departments and organizations must collaborate, which requires dis

  20. Architectures for enabling flexible business processes : A research agenda

    NARCIS (Netherlands)

    Overbeek, S.J.; Gong, Y.

    2010-01-01

    For decades, information systems have been designed for controlling and managing business processes. In the past, these systems were often monolithic in nature and not made for interacting and communicating with other systems. Today, departments and organizations must collaborate, which requires

  1. Completion processing for data communications instructions

    Energy Technology Data Exchange (ETDEWEB)

    Blocksome, Michael A.; Kumar, Sameer; Parker, Jeffrey J.

    2014-06-03

    Completion processing of data communications instructions in a distributed computing environment, including receiving, in an active messaging interface (`AMI`) data communications instructions, at least one instruction specifying a callback function; injecting into an injection FIFO buffer of a data communication adapter, an injection descriptor, each slot in the injection FIFO buffer having a corresponding slot in a pending callback list; listing in the pending callback list any callback function specified by an instruction, incrementing a pending callback counter for each listed callback function; transferring payload data as per each injection descriptor, incrementing a transfer counter upon completion of each transfer; determining from counter values whether the pending callback list presently includes callback functions whose data transfers have been completed; calling by the AMI any such callback functions from the pending callback list, decrementing the pending callback counter for each callback function called.

  2. Completion processing for data communications instructions

    Energy Technology Data Exchange (ETDEWEB)

    Blocksome, Michael A; Kumar, Sameer; Parker, Jeffrey J

    2014-05-20

    Completion processing of data communications instructions in a distributed computing environment, including receiving, in an active messaging interface (`AMI`) data communications instructions, at least one instruction specifying a callback function; injecting into an injection FIFO buffer of a data communication adapter, an injection descriptor, each slot in the injection FIFO buffer having a corresponding slot in a pending callback list; listing in the pending callback list any callback function specified by an instruction, incrementing a pending callback counter for each listed callback function; transferring payload data as per each injection descriptor, incrementing a transfer counter upon completion of each transfer; determining from counter values whether the pending callback list presently includes callback functions whose data transfers have been completed; calling by the AMI any such callback functions from the pending callback list, decrementing the pending callback counter for each callback function called.

  3. The Process Architecture of EU Territorial Cohesion Policy

    Directory of Open Access Journals (Sweden)

    Andreas Faludi

    2010-08-01

    Full Text Available When preparing the European Spatial Development Perspective (ESDP, Member States were supported by the European Commission but denied the EU a competence in the matter. Currently, the Treaty of Lisbon identifies territorial cohesion as a competence shared between the Union and the Member States. This paper is about the process architecture of territorial cohesion policy. In the past, this architecture resembled the Open Method of Coordination (OMC which the White Paper on European Governance praised, but only in areas where there was no EU competence. This reflected zero-sum thinking which may continue even under the Lisbon Treaty. After all, for as long as territorial cohesion was not a competence, voluntary cooperation as practiced in the ESDP process was pursued in this way. However, the practice of EU policies, even in areas where there is an EU competence, often exhibits features of the OMC. Surprisingly effective innovations hold the promise of rendering institutions of decision making comprehensible and democratically accountable. In the EU as a functioning polity decision making is thus at least part deliberative so that actors’ preferences are transformed by the force of the better argument. This brings into focus the socialisation of the deliberators into epistemic communities. Largely an informal process, this is reminiscent of European spatial planning having been characterised as a learning process.

  4. Sensing, Signal Processing, and Communication for WBANs

    Institute of Scientific and Technical Information of China (English)

    Seyyed Hamed Fouladi; Ral ChvezSantiago; Pl Ander Floor; Ilangko Balasingham; Tor ARamstad

    2014-01-01

    A wireless body area network (WBAN) enables real-time monitoring of physiological signals and helps with the early detection of life-threatening diseases. WBAN nodes can be located on, inside, or in close proximity to the body in order to detect vital signals. Measurements from sensors are processed and transmitted over wireless channels. Issues in sensing, signal processing, and com-munication have to be addressed before WBAN can be implemented. In this paper, we survey recent advances in research on sig-nal processing for the sensor measurements, and we describe aspects of communication based on IEEE 802.15.6. We also discuss state-of-the-art WBAN channel modeling in all the frequencies specified by IEEE 802.15.6 as well as the need for new channel models for new different frequencies.

  5. CDMA Technique with Inter-process Communication

    Directory of Open Access Journals (Sweden)

    V. Ravichandran

    2014-02-01

    Full Text Available A novel implementation of Inter process communication in CDMA NOC is proposed. In this study, the orthogonality properties of a Walsh code are used to route data packets between the IP-Cores.The asynchronous circuit design with combinational logic (Gate level design is used for transmission and receiving circuits, along with ip-cores and reduces the processing time and resource utilization. The use of asynchronous pipelined core design process increases the operating frequency as well. The data transfers over IP-Core based interconnect is implemented on gate level. The latency and throughput values are obtained for variable payload size. The performance of asynchronous and synchronous communication are measured and analyzed.

  6. Information architecture: Standards adoption and retirement process service action plan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The purpose of this Service Action Plan is to announce, as well as provide, a high-level outline of a new Departmental process for the adoption and retirement of information technology standards. This process supports the implementation of a Department of Energy (DOE) Information Architecture. This plan was prepared with the Department of Energy information technology standards customers and stakeholders in mind. The process described in this plan will be serviced primarily by staff from the Office of the Deputy Assistant Secretary for Information Management with assistance from designated program and site Information Technology Standards Points of Contact. We welcome any comments regarding this new Departmental process and encourage the proposal of information technology standards for adoption or retirement.

  7. Information architecture: Standards adoption and retirement process service action plan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The purpose of this Service Action Plan is to announce, as well as provide, a high-level outline of a new Departmental process for the adoption and retirement of information technology standards. This process supports the implementation of a Department of Energy (DOE) Information Architecture. This plan was prepared with the Department of Energy information technology standards customers and stakeholders in mind. The process described in this plan will be serviced primarily by staff from the Office of the Deputy Assistant Secretary for Information Management with assistance from designated program and site Information Technology Standards Points of Contact. We welcome any comments regarding this new Departmental process and encourage the proposal of information technology standards for adoption or retirement.

  8. 3rd International Conference on Communications, Signal Processing, and Systems

    CERN Document Server

    Liang, Qilian; Wang, Wei; Zhang, Baoju; Pi, Yiming

    2015-01-01

    The Proceedings of The Third International Conference on Communications, Signal Processing, and Systems provides the state-of-art developments of communications, signal processing, and systems. This book is a collection of contributions from the conference and covers such topics as wireless communications, networks, systems, and signal processing for communications. The conference was held July 2014 in Hohhot, Inner Mongolia, China.

  9. A Distributed DB Architecture for Processing cPIR Queries

    Directory of Open Access Journals (Sweden)

    Sultan.M

    2013-06-01

    Full Text Available Information Retrieval is the Process of obtaining materials, usually documents from unstructured huge volume of data. Several Protocols are available to retrieve bit information available in the distributed databases. A Cloud framework provides a platform for private information retrieval. In this article, we combine the artifacts of the distributed system with Cloud framework for extracting information from unstructured databases. The process involves distributing the database to a number of co-operative peers which will reduce the response of the query by influencing computational resources in the peer. A single query is subdivided into multiple queries and processed in parallel across the distributed sites. Our Simulation results using Cloud Sim shows that this distributed database architecture reduces the cost of computational Private Information Retrieval with reduced response time and processor overload in peer sites.

  10. Integrated quality control architecture for multistage machining processes

    Science.gov (United States)

    Yang, Jie; Liu, Guixiong

    2010-12-01

    To solve problems concerning the process quality prediction control for the multistage machining processes, a integrated quality control architecture is proposed in this paper. First, a hierarchical multiple criteria decision model is established for the key process and the weight matrix method stratified is discussed. Predictive control of the manufacturing quality is not just for on-site monitoring and control layer, control layer in the enterprise, remote monitoring level of quality exists a variety of target predictive control demand, therefore, based on XML to achieve a unified description of manufacturing quality information, and in different source of quality information between agencies to achieve the transfer and sharing. This will predict complex global quality control, analysis and diagnosis data to lay a good foundation to achieve a more practical, open and standardized manufacturing quality with higher levels of information integration system.

  11. Second International Conference on Communications, Signal Processing, and Systems

    CERN Document Server

    Mu, Jiasong; Wang, Wei; Liang, Qilian; Pi, Yiming

    2014-01-01

    The Proceedings of The Second International Conference on Communications, Signal Processing, and Systems provides the state-of-art developments of Communications, Signal Processing, and Systems. The conference covered such topics as wireless communications, networks, systems, signal processing for communications. This book is a collection of contributions coming out of The Second International Conference on Communications, Signal Processing, and Systems (CSPS) held September 2013 in Tianjin, China.

  12. Communication processes, public administration and performance evaluation

    OpenAIRE

    Arta Musaraj

    2011-01-01

    Albanian efforts to fulfill European standards and norm in its Public Administration and service delivery, are becoming a research argument for academics and practitioners as well. Even if significant efforts have been made in this direction there is still a gap in analyzing the link between the communication process which creates and delivers the public service, effect of the used tools in service provision and delivery, the performance evaluation of this sector and the future of the sector ...

  13. Advanced Signal Processing for Wireless Multimedia Communications

    Directory of Open Access Journals (Sweden)

    Xiaodong Wang

    2000-01-01

    Full Text Available There is at present a worldwide effort to develop next-generation wireless communication systems. It is envisioned that many of the future wireless systems will incorporate considerable signal-processing intelligence in order to provide advanced services such as multimedia transmission. In general, wireless channels can be very hostile media through which to communicate, due to substantial physical impediments, primarily radio-frequency interference and time-arying nature of the channel. The need of providing universal wireless access at high data-rate (which is the aim of many merging wireless applications presents a major technical challenge, and meeting this challenge necessitates the development of advanced signal processing techniques for multiple-access communications in non-stationary interference-rich environments. In this paper, we present some key advanced signal processing methodologies that have been developed in recent years for interference suppression in wireless networks. We will focus primarily on the problem of jointly suppressing multiple-access interference (MAI and intersymbol interference (ISI, which are the limiting sources of interference for the high data-rate wireless systems being proposed for many emerging application areas, such as wireless multimedia. We first present a signal subspace approach to blind joint suppression of MAI and ISI. We then discuss a powerful iterative technique for joint interference suppression and decoding, so-called Turbo multiuser detection, that is especially useful for wireless multimedia packet communications. We also discuss space-time processing methods that employ multiple antennas for interference rejection and signal enhancement. Finally, we touch briefly on the problems of suppressing narrowband interference and impulsive ambient noise, two other sources of radio-frequency interference present in wireless multimedia networks.

  14. THE COMMUNICATION PROCESS OF THE FINANCIAL REPORTING

    OpenAIRE

    Nicolaescu Cristina; Moț Ioana

    2013-01-01

    An information has value through the financial reporting. Such are taken into account factors such as: the nature of the event referred to financial reporting, the adequacy of the presentation, the credibility and integrity of information, readability necessary to allow some conclusions on a reasonable impact on the financial statements, the investors risk profile and processing skills recovery opportunities. Communication is not an end in itself. Its existence can not be conceived outside su...

  15. Communications System Architecture Development for Air Traffic Management and Aviation Weather Information Dissemination

    Science.gov (United States)

    Gallagher, Seana; Olson, Matt; Blythe, Doug; Heletz, Jacob; Hamilton, Griff; Kolb, Bill; Homans, Al; Zemrowski, Ken; Decker, Steve; Tegge, Cindy

    2000-01-01

    This document is the NASA AATT Task Order 24 Final Report. NASA Research Task Order 24 calls for the development of eleven distinct task reports. Each task was a necessary exercise in the development of comprehensive communications systems architecture (CSA) for air traffic management and aviation weather information dissemination for 2015, the definition of the interim architecture for 2007, and the transition plan to achieve the desired End State. The eleven tasks are summarized along with the associated Task Order reference. The output of each task was an individual task report. The task reports that make up the main body of this document include Task 5, Task 6, Task 7, Task 8, Task 10, and Task 11. The other tasks provide the supporting detail used in the development of the architecture. These reports are included in the appendices. The detailed user needs, functional communications requirements and engineering requirements associated with Tasks 1, 2, and 3 have been put into a relational database and are provided electronically.

  16. Visualizing human communication in business process simulations

    Science.gov (United States)

    Groehn, Matti; Jalkanen, Janne; Haho, Paeivi; Nieminen, Marko; Smeds, Riitta

    1999-03-01

    In this paper a description of business process simulation is given. Crucial part in the simulation of business processes is the analysis of social contacts between the participants. We will introduce a tool to collect log data and how this log data can be effectively analyzed using two different kind of methods: discussion flow charts and self-organizing maps. Discussion flow charts revealed the communication patterns and self-organizing maps are a very effective way of clustering the participants into development groups.

  17. The Architecture of Mobile Wallet System Based on NFC (Near Field Communication

    Directory of Open Access Journals (Sweden)

    Xiaohua Ma

    2014-03-01

    Full Text Available The study presented mobile wallet system architecture, in order that people can consume more convenient and efficient in life. Nowadays, existing mobile banking applications require real-time online and its tedious steps have been unable to meet needs of users. With the emergence of smart phones continues to heat up in the world, more and more payment methods use mobile payment. In addition, with the continuous improvement of mobile hardware devices, it will be possible that people can use mobile NFC (Near Field Communication tags for payment. This study realized the prototypical system of this architecture in the android environment. Consumer uses this application to achieve proximity payments, without networking. Consumer simply closes to the POS (Point of Sale devices gently, then the payment can be completed.

  18. A channel- and QoS-adaptive turbo coded modulation architecture for mobile multimedia communication

    Institute of Scientific and Technical Information of China (English)

    Zuo Jiancun; Song Wentao; Luo Hanwen; Xu Youyun

    2009-01-01

    This paper proposed a cross-layer dual adaptive coded modulation architecture using turbo codes for mobile multimedia communication, which simultaneously adapted to both the varying channel characteristics and the quality of service (QoS) of various mobile multimedia services to increase the average system throughput substantially. A pragmatic channel-adaptive turbo coded modulation scheme, which comes within 2.5dB of the Shannon limit, was optimally designed, and then a QoS-adaptive scheme was superimposed to build the dual adaptive architecture. Simulation results show that the novel dual adaption reduces the difference with the fading channel capacity to 2dB when assuming different services occur in equal probability and the service duration follows the exponential distribution.

  19. Communication Network Architectures for Smart-House with Renewable Energy Resources

    Directory of Open Access Journals (Sweden)

    Mohamed A. Ahmed

    2015-08-01

    Full Text Available With the microgrid revolution, each house will have the ability to meet its own energy needs locally from renewable energy sources such as solar or wind. However, real-time data gathering, energy management and control of renewable energy systems will depend mainly on the performance of the communications infrastructure. This paper describes the design of a communication network architecture using both wired and wireless technologies for monitoring and controlling distributed energy systems involving small-scale wind turbines and photovoltaic systems. The proposed communication architecture consists of three layers: device layer, network layer, and application layer. Two scenarios are considered: a smart-house and a smart-building. Various types of sensor nodes and measurement devices are defined to monitor the condition of the renewable energy systems based on the international electrotechnical commission standard. The OPNET Modeler is used for performance evaluation in terms of end-to-end (ETE delay. The network performance is compared in view of ETE delay, reliability and implementation cost for three different technologies: Ethernet-based, WiFi-based, and ZigBee-based.

  20. SoC-based architecture for biomedical signal processing.

    Science.gov (United States)

    Gutiérrez-Rivas, R; Hernández, A; García, J J; Marnane, W

    2015-01-01

    Over the last decades, many algorithms have been proposed for processing biomedical signals. Most of these algorithms have been focused on the elimination of noise and artifacts existing in these signals, so they can be used for automatic monitoring and/or diagnosis applications. With regard to remote monitoring, the use of portable devices often requires a reduced number of resources and power consumption, being necessary to reach a trade-off between the accuracy of algorithms and their computational complexity. This paper presents a SoC (System-on-Chip) architecture, based on a FPGA (Field-Programmable Gate Array) device, suitable for the implementation of biomedical signal processing. The proposal has been successfully validated by implementing an efficient QRS complex detector. The results show that, using a reduced amount of resources, values of sensitivity and positive predictive value above 99.49% are achieved, which make the proposed approach suitable for telemedicine applications.

  1. Architectural drawing in the process of visual research: The new school concept of the representation of space

    Directory of Open Access Journals (Sweden)

    Kovač Vladimir

    2016-01-01

    Full Text Available The viewpoint of architect Đorđe Petrović on drawing as a research process, driven by his work at the Faculty of Architecture, University of Belgrade within the field of architectural drawing, is to be taken as a starting point for the analysis of the process of visual representation of architectural space in this paper. The analysis is primarily focused on the relevant period from the beginning of the seventies, when the concept of the New School was formed, and Petrović introduced the concepts of visual research and visual communications to the curriculum, in his reassessment of the role of architectural drawings as a purely technical and information resource. The basic methodological question concerns the interpretation of the concept of visual research, conducted within the reformed curriculum, as well as its position in the then socio-cultural context and in relation to the actual practice of the time and the period that preceded it. Looking at the drawing as a powerful means of representations of space, the paper discusses architectural discourse determined by architectural drawing as the product of social and theoretical practice, similar to the hypothesis of Henri Lefebvre, presented in his work The Production of Space.

  2. Integrated optics architecture for trapped-ion quantum information processing

    Science.gov (United States)

    Kielpinski, D.; Volin, C.; Streed, E. W.; Lenzini, F.; Lobino, M.

    2016-12-01

    Standard schemes for trapped-ion quantum information processing (QIP) involve the manipulation of ions in a large array of interconnected trapping potentials. The basic set of QIP operations, including state initialization, universal quantum logic, and state detection, is routinely executed within a single array site by means of optical operations, including various laser excitations as well as the collection of ion fluorescence. Transport of ions between array sites is also routinely carried out in microfabricated trap arrays. However, it is still not possible to perform optical operations in parallel across all array sites. The lack of this capability is one of the major obstacles to scalable trapped-ion QIP and presently limits exploitation of current microfabricated trap technology. Here we present an architecture for scalable integration of optical operations in trapped-ion QIP. We show theoretically that diffractive mirrors, monolithically fabricated on the trap array, can efficiently couple light between trap array sites and optical waveguide arrays. Integrated optical circuits constructed from these waveguides can be used for sequencing of laser excitation and fluorescence collection. Our scalable architecture supports all standard QIP operations, as well as photon-mediated entanglement channels, while offering substantial performance improvements over current techniques.

  3. Distributed, Modular, Network Enabled Architecture For Process Control Military Applications

    Directory of Open Access Journals (Sweden)

    Abhijit Kamble*,

    2014-02-01

    Full Text Available In process control world, use of distributed modular embedded controller architecture drastically reduces the number and complexity of cabling; at the same time increases the system computing performance and response for real time application as compared to centralized control system. We propose a design based on ARM Cortex M4 hardware architecture and Cortex Microcontroller Software Interface Standard (CMSIS based software development. The ARM Cortex-M series ensures a compatible target processor and provides common core peripherals whereas CMSIS abstraction layer reduces development time, helps design software reusability and provides seamless application software interface for controllers. Being a custom design, we can built features like Built-In Test Equipment (BITE, single point fault tolerance, redundancy, 2/3 logic, etc. which are more desirable for a military applications. This paper describes the design of a generic embedded hardware module that can be configured as local I/O controller or application controller or Man Machine Interface (MMI. This paper also proposes a philosophy for step by step hardware and software development.

  4. JINR CICC in computational chemistry and nanotechnology problems: DL_POLY performance for different communication architectures

    Science.gov (United States)

    Dushanov, E.; Kholmurodov, Kh.; Aru, G.; Korenkov, V.; Smith, W.; Ohno, Y.; Narumi, T.; Morimoto, G.; Taiji, M.; Yasuoka, K.

    2009-05-01

    This report compares the performance of the DL_POLY general-purpose molecular dynamics simulation package on the LIT JINR computing cluster CICC with various communication systems. The comparison involved two cluster architectures: Gigabit Ethernet and InfiniBand technologies, respectively. The code performance tests include some comparison of the CICC cluster with the special-purpose computer MDGRAPE-3 developed at RIKEN for a high-speed acceleration of the MD (molecular dynamics) without a fixed cutoff. The DL_POLY benchmark covers a set of typical MD system simulations detailed below.

  5. Evaluating Defense Architecture Frameworks for C4I System Using Analytic Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Abdullah S. Alghamdi

    2009-01-01

    Full Text Available Problem statement: The Command, Control, Communications, Computers and Intelligence (C4I Systems provided situational awareness about operational environment and supported in decision making and directed to operative environment. These systems had been used by various agencies like defense, police, investigation, road, rail, airports, oil and gas related department. However, the increase use of C4I system had made it more important and attractive. Consequently interest in design and development of C4I system had increased among the researchers. Many defense industry frameworks were available but the problem was a suitable selection of a framework in design and development of C4I system. Approach: This study described the concepts, tool and methodology being used for evaluation analysis of different frameworks by Analytic Hierarchy Process (AHP. Results: We had compared different defense industry frameworks like Department of Defense Architecture Framework (DODAF, Ministry of Defense Architecture Framework (MODAF and NATO Architecture Framework (NAF and found that AHP is fairly good tool in terms of analysis. Conclusion: Different defense industry frameworks such as DODAF, MODAF and NAF had been evaluated and compared using AHP.

  6. Distributed Web Service Architecture Towards Robotic Speech Communication: A Vietnamese Case Study

    Directory of Open Access Journals (Sweden)

    Nhut M. Pham

    2013-02-01

    Full Text Available Robotics is emerging as one of the most prominent research areas in the world and is recently attracting the Vietnamese research community. For the purpose of determining an entrance for a Vietnamese human interacting robotics system, this paper is aimed at proposing a service‐oriented architecture for location assistance robotic systems made out of loosely‐coupled and distributed web services. The proposed platform consists of two major components: a Speech Processing System (SPS and a Service Manipulating System (SMS. This architecture allows our robot to meet three critical human interaction robotic systems requirements: flexibility, scalability and reliability.

  7. Massive MIMO-OFDM indoor visible light communication system downlink architecture design

    Science.gov (United States)

    Lang, Tian; Li, Zening; Chen, Gang

    2014-10-01

    Multiple-input multiple-output (MIMO) technique is now used in most new broadband communication system, and orthogonal frequency division multiplexing (OFDM) is also utilized within current 4th generation (4G) of mobile telecommunication technology. With MIMO and OFDM combined, visible light communication (VLC) system's diversity gain is increase, yet system capacity for dispersive channels is also enhanced. Moreover, with the emerging massive MIMO-OFDM VLC system, there are significant advantages than smaller systems' such as channel hardening, further increasing of energy efficiency (EE) and spectral efficiency (SE) based on law of large number. This paper addresses one of the major technological challenges, system architecture design, which was solved by semispherical beehive structure (SBS) receiver and so that diversity gain can be identified and applied in Massive MIMO VLC system. Simulation results shows that the proposed design clearly presents a spatial diversity over conventional VLC systems.

  8. Reduced-Complexity Wireless Transceiver Architectures and Techniques for Space-Time Communications

    OpenAIRE

    Tsakalaki, Elpiniki

    2012-01-01

    The dissertation sheds light on the performance gains of multi-antenna systems when the antenna aspects and the associated signal processing and coding aspects are integrated together in a multidisciplinary approach, addressing a variety of challenging tasks pertaining to the joint design of smart wireless transceivers and communication techniques. These tasks are at the intersection of different scientific disciplines including signal processing, communications, antennas and propagation. Spe...

  9. Platform for Assessing Strategic Alignment Using Enterprise Architecture: Application to E-Government Process Assessment

    OpenAIRE

    Kaoutar Elhari; Bouchaib Bounabat

    2011-01-01

    This paper presents an overview of S2AEA (v2) (Strategic Alignment Assessment based on Enterprise Architecture (version2)), a platform for modelling enterprise architecture and for assessing strategic alignment based on internal enterprise architecture metrics. The idea of the platform is based on the fact that enterprise architecture provides a structure for business processes and information systems that supports them. This structure can be used to measure the degree of consistency between ...

  10. Modeling cognitive and emotional processes: a novel neural network architecture.

    Science.gov (United States)

    Khashman, Adnan

    2010-12-01

    In our continuous attempts to model natural intelligence and emotions in machine learning, many research works emerge with different methods that are often driven by engineering concerns and have the common goal of modeling human perception in machines. This paper aims to go further in that direction by investigating the integration of emotion at the structural level of cognitive systems using the novel emotional DuoNeural Network (DuoNN). This network has hidden layer DuoNeurons, where each has two embedded neurons: a dorsal neuron and a ventral neuron for cognitive and emotional data processing, respectively. When input visual stimuli are presented to the DuoNN, the dorsal cognitive neurons process local features while the ventral emotional neurons process the entire pattern. We present the computational model and the learning algorithm of the DuoNN, the input information-cognitive and emotional-parallel streaming method, and a comparison between the DuoNN and a recently developed emotional neural network. Experimental results show that the DuoNN architecture, configuration, and the additional emotional information processing, yield higher recognition rates and faster learning and decision making.

  11. An HLA/RTI Architecture Based on Multi-thread Processing

    Institute of Scientific and Technical Information of China (English)

    GUAN Li; ZOU Ru-ping; ZHU Bin; HAO Chong-yang

    2010-01-01

    In order to improve the real-time performance of the real-time HLA (high level architecture) in the application of massive data communication volume, multi-thread processing was adopted, thread pool structure was introduced into the system, different threads to handle corresponding message queues was utilized to respond different message requests. Fur-thermore, an allocation strategy of semi-complete deprivation of priority was adopted, which reduces thread switching cost and processing burden in the system, provided that the message requests with high priority can be responded in time, thus improves the system's overall performance. The design and experiment results indicate that the method proposed in this pa-per can improve the real-time performance of HLA in distributed system applications greatly.

  12. Configurable Transmitter and Systolic Channel Estimator Architectures for Data-Dependent Superimposed Training Communications Systems

    Directory of Open Access Journals (Sweden)

    E. Romero-Aguirre

    2012-01-01

    Full Text Available In this paper, a configurable superimposed training (ST/data-dependent ST (DDST transmitter and architecture based on array processors (APs for DDST channel estimation are presented. Both architectures, designed under full-hardware paradigm, were described using Verilog HDL, targeted in Xilinx Virtex-5 and they were compared with existent approaches. The synthesis results showed a FPGA slice consumption of 1% for the transmitter and 3% for the estimator with 160 and 115 MHz operating frequencies, respectively. The signal-to-quantization-noise ratio (SQNR performance of the transmitter is about 82 dB to support 4/16/64-QAM modulation. A Monte Carlo simulation demonstrates that the mean square error (MSE of the channel estimator implemented in hardware is practically the same as the one obtained with the floating-point golden model. The high performance and reduced hardware of the proposed architectures lead to the conclusion that the DDST concept can be applied in current communications standards.

  13. The Impact of Social Interaction and Communications on Innovation in the Architectural Design Studio

    Directory of Open Access Journals (Sweden)

    Bhzad Sidawi

    2012-07-01

    Full Text Available Design is a social phenomenon and researchers suggest that social interaction, negotiations and communication between designers are essential to initiate creativity. Within the design studio environment, a number of factors affect the healthy social interaction and design negotiations, such as the teaching style of tutors and the culture that governs a design studio’s environment. This may in turn affect the utilization of the outcome of negotiations in the design project. Design studio students from the third to fifth years at the College of Architecture, University of Dammam (UD, the Kingdom of Saudi Arabia (KSA, were surveyed to find out how far the design studio’s culture and communication would impact the production of innovative design projects. The results show that frequent communication and the establishment’s shared grounds are essential to develop knowledge and positively influence the design outcome. On the other hand, the research found that negative qualities on a personal level and on that of a design studio environment would hinder a student’s creativity. However, to develop students’ design/innovative abilities, the researcher recommends that certain measures should be considered. These would include transforming the design studio into an interactive and friendly learning environment, adjusting the teaching methodology, and developing interactive communication abilities of students and tutors.

  14. Communication Characteristics of Large-Scale Scientific Applications for Contemporary Cluster Architectures

    Energy Technology Data Exchange (ETDEWEB)

    Vetter, J S; Mueller, F

    2002-02-13

    This paper examines the explicit communication characteristics of several sophisticated scientific applications; which, by themselves, constitute a representative suite of publicly available benchmarks for large cluster architectures. By focusing on the Message Passing Interface (MPI) and by using hardware counters on the microprocessor, we observe each application's inherent behavioral characteristics: point-to-point and collective communication, and floating-point operations. Furthermore, we explore the sensitivities of these characteristics to both problem size and number of processors. Our analysis reveals several striking similarities across, our diverse set of applications including the use of collective operations, especially those collectives with very small data payloads. We also highlight a trend of novel applications parting with regimented, static communication patterns in favor of dynamically evolving patterns, as evidenced by our experiments on applications that use implicit linear solvers and adaptive mesh refinement. Overall, our study contributes a better understanding of the requirements of current and emerging paradigms of scientific computing in terms of their computation and communication demands.

  15. Communicating Processes with Data for Supervisory Coordination

    Directory of Open Access Journals (Sweden)

    Jasen Markovski

    2012-08-01

    Full Text Available We employ supervisory controllers to safely coordinate high-level discrete(-event behavior of distributed components of complex systems. Supervisory controllers observe discrete-event system behavior, make a decision on allowed activities, and communicate the control signals to the involved parties. Models of the supervisory controllers can be automatically synthesized based on formal models of the system components and a formalization of the safe coordination (control requirements. Based on the obtained models, code generation can be used to implement the supervisory controllers in software, on a PLC, or an embedded (microprocessor. In this article, we develop a process theory with data that supports a model-based systems engineering framework for supervisory coordination. We employ communication to distinguish between the different flows of information, i.e., observation and supervision, whereas we employ data to specify the coordination requirements more compactly, and to increase the expressivity of the framework. To illustrate the framework, we remodel an industrial case study involving coordination of maintenance procedures of a printing process of a high-tech Oce printer.

  16. The Architecture of Cross-Hemispheric Communication in the Aging Brain: Linking Behavior to Functional and Structural Connectivity

    Science.gov (United States)

    Kragel, James E.; Madden, David J.; Cabeza, Roberto

    2012-01-01

    Contralateral recruitment remains a controversial phenomenon in both the clinical and normative populations. To investigate the neural correlates of this phenomenon, we explored the tendency for older adults to recruit prefrontal cortex (PFC) regions contralateral to those most active in younger adults. Participants were scanned with diffusion tensor imaging and functional magnetic rresonance imaging during a lateralized word matching task (unilateral vs. bilateral). Cross-hemispheric communication was measured behaviorally as greater accuracy for bilateral than unilateral trials (bilateral processing advantage [BPA]) and at the neural level by functional and structural connectivity between contralateral PFC. Compared with the young, older adults exhibited 1) greater BPAs in the behavioral task, 2) greater compensatory activity in contralateral PFC during the bilateral condition, 3) greater functional connectivity between contralateral PFC during bilateral trials, and 4) a positive correlation between fractional anisotropy in the corpus callosum and both the BPA and the functional connectivity between contralateral PFC, indicating that older adults' ability to distribute processing across hemispheres is constrained by white matter integrity. These results clarify how older adults’ ability to recruit extra regions in response to the demands of aging is mediated by existing structural architecture, and how this architecture engenders corresponding functional changes that allow subjects to meet those task demands. PMID:21653286

  17. Performance Evaluation of Computation and Communication Kernels of the Fast Multipole Method on Intel Manycore Architecture

    KAUST Repository

    Abduljabbar, Mustafa

    2017-07-31

    Manycore optimizations are essential for achieving performance worthy of anticipated exascale systems. Utilization of manycore chips is inevitable to attain the desired floating point performance of these energy-austere systems. In this work, we revisit ExaFMM, the open source Fast Multiple Method (FMM) library, in light of highly tuned shared-memory parallelization and detailed performance analysis on the new highly parallel Intel manycore architecture, Knights Landing (KNL). We assess scalability and performance gain using task-based parallelism of the FMM tree traversal. We also provide an in-depth analysis of the most computationally intensive part of the traversal kernel (i.e., the particle-to-particle (P2P) kernel), by comparing its performance across KNL and Broadwell architectures. We quantify different configurations that exploit the on-chip 512-bit vector units within different task-based threading paradigms. MPI communication-reducing and NUMA-aware approaches for the FMM’s global tree data exchange are examined with different cluster modes of KNL. By applying several algorithm- and architecture-aware optimizations for FMM, we show that the N-Body kernel on 256 threads of KNL achieves on average 2.8× speedup compared to the non-vectorized version, whereas on 56 threads of Broadwell, it achieves on average 2.9× speedup. In addition, the tree traversal kernel on KNL scales monotonically up to 256 threads with task-based programming models. The MPI-based communication-reducing algorithms show expected improvements of the data locality across the KNL on-chip network.

  18. Control and Non-Payload Communications (CNPC) Prototype Radio - Generation 2 Security Architecture Lab Test Report

    Science.gov (United States)

    Iannicca, Dennis C.; McKim, James H.; Stewart, David H.; Thadhani, Suresh K.; Young, Daniel P.

    2015-01-01

    NASA Glenn Research Center, in cooperation with Rockwell Collins, is working to develop a prototype Control and Non-Payload Communications (CNPC) radio platform as part of NASA Integrated Systems Research Program's (ISRP) Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) project. A primary focus of the project is to work with the FAA and industry standards bodies to build and demonstrate a safe, secure, and efficient CNPC architecture that can be used by industry to evaluate the feasibility of deploying a system using these technologies in an operational capacity. GRC has been working in conjunction with these groups to assess threats, identify security requirements, and to develop a system of standards-based security controls that can be applied to the current GRC prototype CNPC architecture as a demonstration platform. The security controls were integrated into a lab test bed mock-up of the Mobile IPv6 architecture currently being used for NASA flight testing, and a series of network tests were conducted to evaluate the security overhead of the controls compared to the baseline CNPC link without any security. The aim of testing was to evaluate the performance impact of the additional security control overhead when added to the Mobile IPv6 architecture in various modes of operation. The statistics collected included packet captures at points along the path to gauge packet size as the sample data traversed the CNPC network, round trip latency, jitter, and throughput. The effort involved a series of tests of the baseline link, a link with Robust Header Compression (ROHC) and without security controls, a link with security controls and without ROHC, and finally a link with both ROHC and security controls enabled. The effort demonstrated that ROHC is both desirable and necessary to offset the additional expected overhead of applying security controls to the CNPC link.

  19. SArEM: A SPEM extension for software architecture extraction process

    Directory of Open Access Journals (Sweden)

    Mira Abboud

    2016-04-01

    Full Text Available In order to maintain a system, it’s critical to understand its architecture. However even though every system has an architecture, not every system has a reliable representation of its architecture. To deal with this problem many researchers have engaged in software architecture extraction where the system’s architecture is recovered from its source code. While there is a plethora of approaches aiming at extracting software architectures, there is no mean or tool measurement for these approaches; which makes the comparison between the different approaches a hard task. To tackle this lack, we developed a meta-model, based on SPEM meta-model, that specifies the software architecture extraction process. Such meta-model serves as a tool to compare, analyze and evaluate research field approaches. In this paper we detail our meta-model called SArEM (Software Architecture Extraction Meta-model and clarify its concepts.

  20. A Design of the Signal Processing Hardware Platform for Communication Systems

    Science.gov (United States)

    Lee, Byung Wook; Cho, Sung Ho

    In this letter, an efficient hardware platform for the digital signal processing for OFDM communication systems is presented. The hardware platform consists of a single FPGA having 900K gates, two DSPs with maximum 8,000 MIPS at 1GHz clock, 2-channel ADC and DAC supporting maximum 125MHz sampling rate, and flexible data bus architecture, so that a wide variety of baseband signal processing algorithms for practical OFDM communication systems may be implemented and tested. The IEEE 802.16d software modem is also presented in order to verify the effectiveness and usefulness of the designed platform.

  1. Deferred Action: Theoretical model of process architecture design for emergent business processes

    Directory of Open Access Journals (Sweden)

    Patel, N.V.

    2007-01-01

    Full Text Available E-Business modelling and ebusiness systems development assumes fixed company resources, structures, and business processes. Empirical and theoretical evidence suggests that company resources and structures are emergent rather than fixed. Planning business activity in emergent contexts requires flexible ebusiness models based on better management theories and models . This paper builds and proposes a theoretical model of ebusiness systems capable of catering for emergent factors that affect business processes. Drawing on development of theories of the ‘action and design’class the Theory of Deferred Action is invoked as the base theory for the theoretical model. A theoretical model of flexible process architecture is presented by identifying its core components and their relationships, and then illustrated with exemplar flexible process architectures capable of responding to emergent factors. Managerial implications of the model are considered and the model’s generic applicability is discussed.

  2. A Concept Transformation Learning Model for Architectural Design Learning Process

    Science.gov (United States)

    Wu, Yun-Wu; Weng, Kuo-Hua; Young, Li-Ming

    2016-01-01

    Generally, in the foundation course of architectural design, much emphasis is placed on teaching of the basic design skills without focusing on teaching students to apply the basic design concepts in their architectural designs or promoting students' own creativity. Therefore, this study aims to propose a concept transformation learning model to…

  3. A Concept Transformation Learning Model for Architectural Design Learning Process

    Science.gov (United States)

    Wu, Yun-Wu; Weng, Kuo-Hua; Young, Li-Ming

    2016-01-01

    Generally, in the foundation course of architectural design, much emphasis is placed on teaching of the basic design skills without focusing on teaching students to apply the basic design concepts in their architectural designs or promoting students' own creativity. Therefore, this study aims to propose a concept transformation learning model to…

  4. Commentary: how can technology help us understand the communication process?

    Science.gov (United States)

    Keyton, Joann

    2012-08-01

    In this commentary, the author reflects on the articles chosen for the special section on communications analysis. These articles problematize communication and raise an interesting set of questions for both human factors and communication scholars to ponder. In the end, both sets of scholars seek the same goal: How do we better examine communication to improve it? Problematizing communication requires scholars to challenge their fundamental assumptions about the phenomenon as well as to tease out the distinctions of methodological approaches typically used by both human factors and communication scholars. Human factors scholars tend to favor forms of communication in which technology or task roles control who can communicate and how. Communication scholars tend to favor contexts in which information flows more freely with fewer explicit restrictions. Creating opportunities to collaborate in research on the communication process may create the best understanding of technology that can better serve our understanding of communication.

  5. Culture: A Filtration Process during Communication in Education.

    Science.gov (United States)

    de Lange, Rudi

    This paper focuses on the filtration process of culture during communication in education with reference to visual elements. An introduction provides a review of some communication models--graphic representations of theories that attempt to predict and explain the process of communication. These simple models are discussed: Aristotle's model of…

  6. Distributed Broker-Agent Architecture for Multimedia Communications Traversing NAT/Firewall in NGN

    Institute of Scientific and Technical Information of China (English)

    苟先太; 金炜东

    2004-01-01

    The forthcoming Next Generation Network (NGN) is an all IP network. Multimedia communications over IP networks are a type of bundled session communications, which cannot directly traverse Network Address Translations (NATs) and firewalls even in NGN. To solve the problem that the existing traversal methods are not suitable for service providers to set up a real system in NGN,a Distributed Broker-agent Architecture (DBA) is addressed. DBA is secure and realizable for service providers and enterprises because it is easy to set up and does not need to upgrade the existing devices like Firewalls, NATs or endpoint devices of subscribers.DBA is composed of two-layer distributed agents, the server proxies and the client agents, in which all multimedia communications use shared tunnels to carry signaling messages and media data between broker-agents, and the call signaling is encrypted over Security Socket Layer (SSL) to guarantee the security of calling. Moreover, the function model and multiplexed connection messages format of DBA are designed, which lays a basis for the protocol in the future NGN. In addition, a simple implementation based on H.323 verifyies the main function of traversing firewalls and NATs.

  7. Laying the groundwork for enterprise-wide medical language processing services: architecture and process.

    Science.gov (United States)

    Chen, Elizabeth S; Maloney, Francine L; Shilmayster, Eugene; Goldberg, Howard S

    2009-11-14

    A systematic and standard process for capturing information within free-text clinical documents could facilitate opportunities for improving quality and safety of patient care, enhancing decision support, and advancing data warehousing across an enterprise setting. At Partners HealthCare System, the Medical Language Processing (MLP) services project was initiated to establish a component-based architectural model and processes to facilitate putting MLP functionality into production for enterprise consumption, promote sharing of components, and encourage reuse. Key objectives included exploring the use of an open-source framework called the Unstructured Information Management Architecture (UIMA) and leveraging existing MLP-related efforts, terminology, and document standards. This paper describes early experiences in defining the infrastructure and standards for extracting, encoding, and structuring clinical observations from a variety of clinical documents to serve enterprise-wide needs.

  8. UNREALIZED COMPETITIONS OF THE 1920-1930ies IN THE CONTEXT OF THE ARCHITECTURE DEVELOPMENT PROCESS

    Directory of Open Access Journals (Sweden)

    Dudka Elena Nikolaevna

    2012-10-01

    Full Text Available Analysis of organizational and methodical issues associated with architectural competitions of the 1920-1930ss and evaluation of their results are provided in the article. The role of the architectural development and historical, cultural, social and ideological backgrounds of the architectural competitions are also covered by the author. The review of architectural competitions makes it possible to identify their impact produced on the development of the theory and practice of architecture. The period between 1920 and 1930 was marked by a quantitative and qualitative boom of architectural design competitions. Analysis of the practice of architectural competitions makes it possible to identify periods of revolutionary transformations. The most prominent buildings that date back to these periods include theatre buildings in Kharkov, Rostov-Don, Sverdlovsk; a competition for the architectural design of the Gosprom Building in Kharkov; a competition for the architectural design of the Palace of Soviets in Moscow, etc. These competitions have shaped up new approaches to volume and space-related solutions as well as architectural forms. Research of the integral process of development of approaches and/or methods of organization of architectural design competitions make it possible to identify their role as effective catalysts of architectural theory and practice.

  9. Risk communication strategy development using the aerospace systems engineering process

    Science.gov (United States)

    Dawson, S.; Sklar, M.

    2004-01-01

    This paper explains the goals and challenges of NASA's risk communication efforts and how the Aerospace Systems Engineering Process (ASEP) was used to map the risk communication strategy used at the Jet Propulsion Laboratory to achieve these goals.

  10. A proof system for asynchronously communicating deterministic processes

    NARCIS (Netherlands)

    de Boer, F.S.|info:eu-repo/dai/nl/072666641; van Hulst, M.

    1994-01-01

    We introduce in this paper new communication and synchronization constructs which allow deterministic processes, communicating asynchronously via unbounded FIFO buffers, to cope with an indeterminate environment. We develop for the resulting parallel programming language, which subsumes deterministi

  11. A proof system for asynchronously communicating deterministic processes

    NARCIS (Netherlands)

    de Boer, F.S.; van Hulst, M.

    1994-01-01

    We introduce in this paper new communication and synchronization constructs which allow deterministic processes, communicating asynchronously via unbounded FIFO buffers, to cope with an indeterminate environment. We develop for the resulting parallel programming language, which subsumes deterministi

  12. Appropriate teaching and learning strategies for the architectural design process in pedagogic design studios

    Directory of Open Access Journals (Sweden)

    Ashraf M. Soliman

    2017-06-01

    Full Text Available The national qualification framework of a country requires a certain level of knowledge and complexity of skills for an academic degree to be recognized. For architectural programs, student workload is heavy on design courses. Therefore, each course must be carefully developed to ensure that students are not overloaded. Teaching and learning strategies have different implications for courses, which occasionally result in overloading the students. This research aims to study the three main pillars of teaching and learning strategies for each design phase in pedagogic design studios. The most appropriate model for each teaching and learning strategy, including a set of the three main pillars, is then identified for each design phase. A practical strategy for managing design studios is also determined. The aforementioned three pillars are as follows: teaching and learning methods, assigned tasks or study aspects, and design communication techniques. Two research methods, namely, a literature review and a survey among design educators, are adopted. The literature review examines aspects that contribute to the design process and its phases, teaching methods, design skills, communication methods, and studio management strategies. On the basis of the literature review, the background of developments and practices in the design education process are used as constructive tools to develop the survey for design educators. Through the survey, the pillars of teaching and learning strategies that are frequently practiced in design studios are evaluated. Results of this study are classified into three ranks using the nature break classification method for numerical values. Subsequently, three priority models that correspond to teaching and learning strategies, as well as to the required skills and capabilities, are established. A group-based strategy with an interdisciplinary approach is also determined to be the most suitable technique for managing the

  13. Architecture For The Optimization Of A Machining Process In Real Time Through Rule-Based Expert System

    Science.gov (United States)

    Serrano, Rafael; González, Luis Carlos; Martín, Francisco Jesús

    2009-11-01

    Under the project SENSOR-IA which has had financial funding from the Order of Incentives to the Regional Technology Centers of the Counsil of Innovation, Science and Enterprise of Andalusia, an architecture for the optimization of a machining process in real time through rule-based expert system has been developed. The architecture consists of an acquisition system and sensor data processing engine (SATD) from an expert system (SE) rule-based which communicates with the SATD. The SE has been designed as an inference engine with an algorithm for effective action, using a modus ponens rule model of goal-oriented rules.The pilot test demonstrated that it is possible to govern in real time the machining process based on rules contained in a SE. The tests have been done with approximated rules. Future work includes an exhaustive collection of data with different tool materials and geometries in a database to extract more precise rules.

  14. Digital signal processor and its application. ; Animation processing DSP architectures. Digital signal processor to sono oyo. ; Dogazo shoriyo DSP architecture

    Energy Technology Data Exchange (ETDEWEB)

    Murakami, T.; Ohira, H. (Mitsubishi Electric Corp., Tokyo (Japan))

    1991-12-20

    A description is given on the internationally standardized animation coding system, and existing and next generation type image processing digital signal processor (DSP) architectures. The internationally standardized animation coding system stratifies images into segments of picture element, frame, and block, with each stratum given exclusive processing. A TV conference and a TV telephone conversation require a huge amount of animation image data. To process these data on a real-time basis, the current video image processing system takes a multi DSP configuration. Methods to split the loads and allocate each load fixedly to each DSP are classified into splitting the loads in the units of coding processing function, the object images, and the loads according to amounts of loads to be calculated. These splitting methods are applied to each stratum processing. The process and splitting corresponding to each stratum processing improved the efficiency. Since the method is a software-based processing, it can be applied not only to the irternationally standardized system, but also to the vector quantization system. Although the present LSI technology is not sufficiently capable to mount the architectures meeting the stratified configuration on one chip, an architecture that specializes the functions in each stratum has a possibility to serve as one chip DSP. 14 refs., 5 figs., 4 tabs.

  15. Devising a Secure Architecture of Internet of Everything (IoE to Avoid the Data Exploitation in Cross Culture Communications

    Directory of Open Access Journals (Sweden)

    Asim Majeed

    2016-04-01

    Full Text Available The communication infrastructure among various interconnected devices has revolutionized the process of collecting and sharing information. This evolutionary paradigm of collecting, storing and analyzing data streams is called the Internet of Everything (IoE. The information exchange through IoE is fast and accurate but leaves security issues. The emergence of IoE has seen a drift from a single novel technology to several technological developments. Managing various technologies under one infrastructure is complex especially when a network is openly allowing nodes to access it. Access transition of infrastructures from closed networked environments to the public internets has raised security issues. The consistent growth in IoE technology is recognized as a bridge between physical, virtual and cross-cultural worlds. Modern enterprises are becoming reliant on interconnected wireless intelligent devices and this has put billions of user’s data in risk. The interference and intrusion in any infrastructure have opened the door of public safety concerns because this interception could compromise the user’s personal data as well as personal privacy. This research aims to adopt a holistic approach to devising a secure IoE architecture for cross-culture communication organizations, with attention paid to the various technological wearable devices, their security policies, communication protocols, data format and data encryption features to avoid the data exploitation. A systems methodology will be adopted with a view to developing a secure IoE model which provides for a generic implementation after analyzing the critical security features to minimize the risk of data exploitations. This would combine the ability of IoE to connect, communicate, and remotely manage an incalculable number of networked, automated devices with the security properties of authentication, availability, integrity and confidentiality on a configurable basis. This will help

  16. A Review on Architectures and Communications Technologies for Wearable Health-Monitoring Systems

    Directory of Open Access Journals (Sweden)

    José Ignacio Moreno

    2012-10-01

    Full Text Available Nowadays society is demanding more and more smart healthcare services that allow monitoring patient status in a non-invasive way, anywhere and anytime. Thus, healthcare applications are currently facing important challenges guided by the u-health (ubiquitous health and p-health (pervasive health paradigms. New emerging technologies can be combined with other widely deployed ones to develop such next-generation healthcare systems. The main objective of this paper is to review and provide more details on the work presented in “LOBIN: E-Textile and Wireless-Sensor-Network-Based Platform for Healthcare Monitoring in Future Hospital Environments”, published in the IEEE Transactions on Information Technology in Biomedicine, as well as to extend and update the comparison with other similar systems. As a result, the paper discusses the main advantages and disadvantages of using different architectures and communications technologies to develop wearable systems for pervasive healthcare applications.

  17. Integrating acoustic analysis in the architectural design process using parametric modelling

    DEFF Research Database (Denmark)

    Peters, Brady

    2011-01-01

    This paper discusses how parametric modeling techniques can be used to provide architectural designers with a better understanding of the acoustic performance of their designs and provide acoustic engineers with models that can be analyzed using computational acoustic analysis software. Architects...... provide a method by which architects and engineers can work together more efficiently and communicate better. This research is illustrated through the design of an architectural project, a new school in Copenhagen, Denmark by JJW Architects, where parametric modeling techniques have been used in different......, acoustic performance can inform the geometry and material logic of the design. In this way, the architectural design and the acoustic analysis model become linked....

  18. A Process Framework for Designing Software Reference Architectures for Providing Tools as a Service

    DEFF Research Database (Denmark)

    Chauhan, Muhammad Aufeef; Babar, Muhammad Ali; Probst, Christian W.

    2016-01-01

    of software systems need customized and systematic SRA design and evaluation methods. In this paper, we present a software Reference Architecture Design process Framework (RADeF) that can be used for analysis, design and evaluation of the SRA for provisioning of Tools as a Service as part of a cloud......Software Reference Architecture (SRA), which is a generic architecture solution for a specific type of software systems, provides foundation for the design of concrete architectures in terms of architecture design guidelines and architecture elements. The complexity and size of certain types......-enabled workSPACE (TSPACE). The framework is based on the state of the art results from literature and our experiences with designing software architectures for cloud-based systems. We have applied RADeF SRA design two types of TSPACE: software architecting TSPACE and software implementation TSPACE...

  19. SACA: Self-Aware Communication Architecture for IoT Using Mobile Fog Servers

    Directory of Open Access Journals (Sweden)

    Vishal Sharma

    2017-01-01

    Full Text Available Internet of things (IoT aims at bringing together large business enterprise solutions and architectures for handling the huge amount of data generated by millions of devices. For this aim, IoT is necessary to connect various devices and provide a common platform for storage and retrieval of information without fail. However, the success of IoT depends on the novelty of network and its capability in sustaining the increasing demand by users. In this paper, a self-aware communication architecture (SACA is proposed for sustainable networking over IoT devices. The proposed approach employs the concept of mobile fog servers which make relay using the train and unmanned aerial vehicle (UAV networks. The problem is presented based on Wald’s maximum model, which is resolved by the application of a distributed node management (DNM system and state dependency formulations. The proposed approach is capable of providing prolonged connectivity by increasing the network reliability and sustainability even in the case of failures. The effectiveness of the proposed approach is demonstrated through numerical and network simulations in terms of significant gains attained with lesser delay and fewer packet losses. The proposed approach is also evaluated against Sybil, wormhole, and DDoS attacks for analyzing its sustainability and probability of connectivity in unfavorable conditions.

  20. Adaptive link layer security architecture for telecommand communications in space networks

    Institute of Scientific and Technical Information of China (English)

    Lei Zhang; Chengjin An; Susanna Spinsante; Chaojing Tang

    2014-01-01

    Impressive advances in space technology are en-abling complex missions, with potential y significant and long term impacts on human life and activities. In the vision of future space exploration, communication links among planets, satel ites, spacecrafts and crewed vehicles wil be designed according to a new paradigm, known as the disruption tolerant networking. In this scenario, space channel peculiarities impose a massive re-engineering of many of the protocols usual y adopted in terrestrial networks; among them, security solutions are to be deeply re-viewed, and tailored to the specific space requirements. Security is to be provided not only to the payload data exchanged on the network, but also to the telecommands sent to a spacecraft, along possibly differentiated paths. Starting from the secure space telecommand design developed by the Consultative Committee for Space Data Systems as a response to agency-based require-ments, an adaptive link layer security architecture is proposed to address some of the chal enges for future space networks. Based on the analysis of the communication environment and the error diffusion properties of the authentication algorithms, a suitable mechanism is proposed to classify frame retransmission requests on the basis of the originating event (error or security attack) and reduce the impact of security operations. An adaptive algorithm to optimize the space control protocol, based on estimates of the time varying space channel, is also presented. The simulation results clearly demonstrate that the proposed architecture is feasible and efficient, especial y when facing malicious attacks against frame transmission.

  1. Has the architectural process of public buildings changed since the romans?

    DEFF Research Database (Denmark)

    Brink Rasmussen, Mai; Jensen, Rasmus Lund; Fisker, Anna Marie

    2014-01-01

    Have the architectural process of public buildings changed as much as the society since the Romans? This paper compares the Roman approach of public buildings with the Danish approach today.......Have the architectural process of public buildings changed as much as the society since the Romans? This paper compares the Roman approach of public buildings with the Danish approach today....

  2. Clinical engineering and risk management in healthcare technological process using architecture framework.

    Science.gov (United States)

    Signori, Marcos R; Garcia, Renato

    2010-01-01

    This paper presents a model that aids the Clinical Engineering to deal with Risk Management in the Healthcare Technological Process. The healthcare technological setting is complex and supported by three basics entities: infrastructure (IS), healthcare technology (HT), and human resource (HR). Was used an Enterprise Architecture - MODAF (Ministry of Defence Architecture Framework) - to model this process for risk management. Thus, was created a new model to contribute to the risk management in the HT process, through the Clinical Engineering viewpoint. This architecture model can support and improve the decision making process of the Clinical Engineering to the Risk Management in the Healthcare Technological process.

  3. Destination directed packet switch architecture for a 30/20 GHz FDMA/TDM geostationary communication satellite network

    Science.gov (United States)

    Ivancic, William D.; Shalkhauser, Mary JO

    1991-01-01

    Emphasis is on a destination directed packet switching architecture for a 30/20 GHz frequency division multiplex access/time division multiplex (FDMA/TDM) geostationary satellite communication network. Critical subsystems and problem areas are identified and addressed. Efforts have concentrated heavily on the space segment; however, the ground segment was considered concurrently to ensure cost efficiency and realistic operational constraints.

  4. Circuit-switch architecture for a 30/20-GHz FDMA/TDM geostationary satellite communications network

    Science.gov (United States)

    Ivancic, William D.

    1992-01-01

    A circuit switching architecture is described for a 30/20 GHz frequency division, multiple access uplink/time division multiplexed downlink (FDMA/TDM) geostationary satellite communications network. Critical subsystems and problem areas are identified and addressed. Work was concentrated primarily on the space segment; however, the ground segment was considered concurrently to ensure cost efficiency and realistic operational constraints.

  5. Destination-directed, packet-switching architecture for 30/20-GHz FDMA/TDM geostationary communications satellite network

    Science.gov (United States)

    Ivancic, William D.; Shalkhauser, Mary JO

    1992-01-01

    A destination-directed packet switching architecture for a 30/20-GHz frequency division multiple access/time division multiplexed (FDMA/TDM) geostationary satellite communications network is discussed. Critical subsystems and problem areas are identified and addressed. Efforts have concentrated heavily on the space segment; however, the ground segment has been considered concurrently to ensure cost efficiency and realistic operational constraints.

  6. Communication Barriers in Quality Process: Sakarya University Sample

    Science.gov (United States)

    Yalcin, Mehmet Ali

    2012-01-01

    Communication has an important role in life and especially in education. Nowadays, lots of people generally use technology for communication. When technology uses in education and other activities, there may be some communication barriers. And also, quality process has an important role in higher education institutes. If a higher education…

  7. Space Communications and Navigation (SCaN) Integrated Network Architecture Definition Document (ADD). Volume 1; Executive Summary; Revision 1

    Science.gov (United States)

    Younes, Badri A.; Schier, James S.

    2010-01-01

    The SCaN Program has defined an integrated network architecture that fully meets the Administrator s mandate to the Program, and will result in a NASA infrastructure capable of providing the needed and enabling communications services to future space missions. The integrated network architecture will increase SCaN operational efficiency and interoperability through standardization, commonality and technology infusion. It will enable NASA missions requiring advanced communication and tracking capabilities such as: a. Optical communication b. Antenna arraying c. Lunar and Mars Relays d. Integrated network management (service management and network control) and integrated service execution e. Enhanced tracking for navigation f. Space internetworking with DTN and IP g. End-to-end security h. Enhanced security services Moreover, the SCaN Program has created an Integrated Network Roadmap that depicts an orchestrated and coherent evolution path toward the target architecture, encompassing all aspects that concern network assets (i.e., operations and maintenance, sustaining engineering, upgrade efforts, and major development). This roadmap identifies major NASA ADPs, and shows dependencies and drivers among the various planned undertakings and timelines. The roadmap is scalable to accommodate timely adjustments in response to Agency needs, goals, objectives and funding. Future challenges to implementing this architecture include balancing user mission needs, technology development, and the availability of funding within NASA s priorities. Strategies for addressing these challenges are to: define a flexible architecture, update the architecture periodically, use ADPs to evaluate options and determine when to make decisions, and to engage the stakeholders in these evaluations. In addition, the SCaN Program will evaluate and respond to mission need dates for technical and operational capabilities to be provided by the SCaN integrated network. In that regard, the architecture

  8. Advanced information processing system: Authentication protocols for network communication

    Science.gov (United States)

    Harper, Richard E.; Adams, Stuart J.; Babikyan, Carol A.; Butler, Bryan P.; Clark, Anne L.; Lala, Jaynarayan H.

    1994-01-01

    In safety critical I/O and intercomputer communication networks, reliable message transmission is an important concern. Difficulties of communication and fault identification in networks arise primarily because the sender of a transmission cannot be identified with certainty, an intermediate node can corrupt a message without certainty of detection, and a babbling node cannot be identified and silenced without lengthy diagnosis and reconfiguration . Authentication protocols use digital signature techniques to verify the authenticity of messages with high probability. Such protocols appear to provide an efficient solution to many of these problems. The objective of this program is to develop, demonstrate, and evaluate intercomputer communication architectures which employ authentication. As a context for the evaluation, the authentication protocol-based communication concept was demonstrated under this program by hosting a real-time flight critical guidance, navigation and control algorithm on a distributed, heterogeneous, mixed redundancy system of workstations and embedded fault-tolerant computers.

  9. A cognitive neural architecture able to learn and communicate through natural language

    OpenAIRE

    Bruno Golosio; Angelo Cangelosi; Olesya Gamotina; Giovanni Luca Masala

    2015-01-01

    Communicative interactions involve a kind of procedural knowledge that is used by the human brain for processing verbal and nonverbal inputs and for language production. Although considerable work has been done on modeling human language abilities, it has been difficult to bring them together to a comprehensive tabula rasa system compatible with current knowledge of how verbal information is processed in the brain. This work presents a cognitive system, entirely based on a large-scale neural ...

  10. A novel PRP based deterministic, redundant and resilient IEC 61850 substation communication architecture

    Directory of Open Access Journals (Sweden)

    S.M. Suhail Hussain

    2016-09-01

    Full Text Available A secure, reliable, redundant, resilient, time critical, efficient and interoperable substation communication network (SCN is a prerequisite for a viable Substation Automation System (SAS. Due to emergence of IEC 61850 as a global standard for substation automation, the interoperability issues among components of substation from different vendors are resolved. The communication network must be fault tolerant and any substantial levels of disturbances should not affect the normal operation of the SAS. Due to digitization in SCN, the communication methodology is mainly focused on exchange of encrypted packet information. Failure of the communication mechanism, even for the order of milliseconds, would lead to catastrophic effects within the substation and also impacts the operation of grid, if not cleared timely. The high reliability of such a system is only possible under a redundant communication network which has a zero switchover time. Hence IEC 62439-3 based redundant protocols such as Parallel Redundancy Protocol (PRP recommended to be used in SCNs to achieve redundancy and seamless recovery in case of a failure. PRP based SAS along with detailed analysis of underlying process for implementing PRP protocol and its comparison with existing conventional protocols based SCN reported in literature is presented.

  11. Bioinspired decision architectures containing host and microbiome processing units.

    Science.gov (United States)

    Heyde, K C; Gallagher, P W; Ruder, W C

    2016-09-27

    Biomimetic robots have been used to explore and explain natural phenomena ranging from the coordination of ants to the locomotion of lizards. Here, we developed a series of decision architectures inspired by the information exchange between a host organism and its microbiome. We first modeled the biochemical exchanges of a population of synthetically engineered E. coli. We then built a physical, differential drive robot that contained an integrated, onboard computer vision system. A relay was established between the simulated population of cells and the robot's microcontroller. By placing the robot within a target-containing a two-dimensional arena, we explored how different aspects of the simulated cells and the robot's microcontroller could be integrated to form hybrid decision architectures. We found that distinct decision architectures allow for us to develop models of computation with specific strengths such as runtime efficiency or minimal memory allocation. Taken together, our hybrid decision architectures provide a new strategy for developing bioinspired control systems that integrate both living and nonliving components.

  12. Mobile Technology and CAD Technology Integration in Teaching Architectural Design Process for Producing Creative Product

    Science.gov (United States)

    Bin Hassan, Isham Shah; Ismail, Mohd Arif; Mustafa, Ramlee

    2011-01-01

    The purpose of this research is to examine the effect of integrating the mobile and CAD technology on teaching architectural design process for Malaysian polytechnic architectural students in producing a creative product. The website is set up based on Caroll's minimal theory, while mobile and CAD technology integration is based on Brown and…

  13. An event-driven distributed processing architecture for image-guided cardiac ablation therapy.

    Science.gov (United States)

    Rettmann, M E; Holmes, D R; Cameron, B M; Robb, R A

    2009-08-01

    Medical imaging data is becoming increasing valuable in interventional medicine, not only for preoperative planning, but also for real-time guidance during clinical procedures. Three key components necessary for image-guided intervention are real-time tracking of the surgical instrument, aligning the real-world patient space with image-space, and creating a meaningful display that integrates the tracked instrument and patient data. Issues to consider when developing image-guided intervention systems include the communication scheme, the ability to distribute CPU intensive tasks, and flexibility to allow for new technologies. In this work, we have designed a communication architecture for use in image-guided catheter ablation therapy. Communication between the system components is through a database which contains an event queue and auxiliary data tables. The communication scheme is unique in that each system component is responsible for querying and responding to relevant events from the centralized database queue. An advantage of the architecture is the flexibility to add new system components without affecting existing software code. In addition, the architecture is intrinsically distributed, in that components can run on different CPU boxes, and even different operating systems. We refer to this Framework for Image-Guided Navigation using a Distributed Event-Driven Database in Real-Time as the FINDER architecture. This architecture has been implemented for the specific application of image-guided cardiac ablation therapy. We describe our prototype image-guidance system and demonstrate its functionality by emulating a cardiac ablation procedure with a patient-specific phantom. The proposed architecture, designed to be modular, flexible, and intuitive, is a key step towards our goal of developing a complete system for visualization and targeting in image-guided cardiac ablation procedures.

  14. Perceptions of organizational communication processes in quality management

    Directory of Open Access Journals (Sweden)

    Esther Arnold

    2011-06-01

    Full Text Available Language is a natural psychological phenomenon, indispensable to all humans in society. This article presents the theoretical foundations on communication in process quality management, bringing studies dealing with communication and ISO 9001:2000 management, aiming at investigating how these variables have been perceived in organizations. The importance of the steps that should permeate the communication process is highlighted through published research, concluding on the need for studies that demonstrate the importance of subjectivity in the communication process, a present phenomenon in any interpersonal relationship.

  15. Baccalaureate Nursing Students' Communication Process in the Clinical Setting.

    Science.gov (United States)

    Kotecki, Catherine Nuss

    2002-01-01

    Interviews (n=22) and observations (n=14) in clinical settings were coded and analyzed to identify student nurses' problems in communicating with patients and the process of learning solutions. The process involved affirming the self, engaging the patient, experiencing communication breakdown, and refining the repertoire of communication…

  16. Team Communication as a Collaborative Process

    Directory of Open Access Journals (Sweden)

    Felix Gervits

    2016-10-01

    Full Text Available Communication channels can reveal a great deal of information about the effectiveness of a team. This is particularly relevant for teams operating in performance settings such as medical groups, military squads, and mixed human-robot teams. Currently, it is not known how various factors including coordination strategy, speaker role, and time pressure affect communication in collaborative tasks. The purpose of this paper is to systematically explore how these factors interact with team discourse in order to better understand effective communication patterns. In our analysis of a corpus of remote task-oriented dialogue (CReST corpus, we found that a variety of linguistic- and dialogue-level features were influenced by time pressure, speaker role, and team effectiveness. We also found that effective teams had a higher speech rate, and used specific grounding strategies to improve efficiency and coordination under time pressure. These results inform our understanding of the various factors that influence team communication, and highlight ways in which effective teams overcome constraints on their communication channels.

  17. Methodological process for chromatic reading of traditional architectural elements

    Directory of Open Access Journals (Sweden)

    Andrea Costa Romão Silva

    2016-01-01

    Full Text Available This article proposes to research the complex phenomenon of color in an architectural environment from the presentation of a specific methodology, based on historical-document research and technical-architectural developed for the particular case of six religious monuments of the Historical Center of São Cristóvão, in Sergipe – Brazil. The implementation of this type of research becomes relevant due to the fact the color is inserted in the space physiognomy as a cultural factor, related to historical issues of symbolic associations, although, due to its heterogeneity, is subject to constant changes in their appearance. Therefore, the documentation becomes an important tool for organization and registration of renascent color memory, safeguarding it at the same time can help restoration work that may occur.

  18. Platform for Assessing Strategic Alignment Using Enterprise Architecture: Application to E-Government Process Assessment

    Directory of Open Access Journals (Sweden)

    Kaoutar Elhari

    2011-01-01

    Full Text Available This paper presents an overview of S2AEA (v2 (Strategic Alignment Assessment based on Enterprise Architecture (version2, a platform for modelling enterprise architecture and for assessing strategic alignment based on internal enterprise architecture metrics. The idea of the platform is based on the fact that enterprise architecture provides a structure for business processes and information systems that supports them. This structure can be used to measure the degree of consistency between business strategies and information systems. In that sense, this paper presents a platform illustrating the role of enterprise architecture in the strategic alignment assessment. This assessment can be used in auditing information systems. The platform is applied to assess an e-government process.

  19. Platform for Assessing Strategic Alignment Using Enterprise Architecture: Application to E-Government Process Assessment

    CERN Document Server

    Elhari, Kaoutar

    2011-01-01

    This paper presents an overview of S2AEA (v2) (Strategic Alignment Assessment based on Enterprise Architecture (version2)), a platform for modelling enterprise architecture and for assessing strategic alignment based on internal enterprise architecture metrics. The idea of the platform is based on the fact that enterprise architecture provides a structure for business processes and information systems that supports them. This structure can be used to measure the degree of consistency between business strategies and information systems. In that sense, this paper presents a platform illustrating the role of enterprise architecture in the strategic alignment assessment. This assessment can be used in auditing information systems. The platform is applied to assess an e-government process.

  20. Focal and Ambient Processing of Built Environments: Intellectual and Atmospheric Experiences of Architecture

    Science.gov (United States)

    Rooney, Kevin K.; Condia, Robert J.; Loschky, Lester C.

    2017-01-01

    Neuroscience has well established that human vision divides into the central and peripheral fields of view. Central vision extends from the point of gaze (where we are looking) out to about 5° of visual angle (the width of one’s fist at arm’s length), while peripheral vision is the vast remainder of the visual field. These visual fields project to the parvo and magno ganglion cells, which process distinctly different types of information from the world around us and project that information to the ventral and dorsal visual streams, respectively. Building on the dorsal/ventral stream dichotomy, we can further distinguish between focal processing of central vision, and ambient processing of peripheral vision. Thus, our visual processing of and attention to objects and scenes depends on how and where these stimuli fall on the retina. The built environment is no exception to these dependencies, specifically in terms of how focal object perception and ambient spatial perception create different types of experiences we have with built environments. We argue that these foundational mechanisms of the eye and the visual stream are limiting parameters of architectural experience. We hypothesize that people experience architecture in two basic ways based on these visual limitations; by intellectually assessing architecture consciously through focal object processing and assessing architecture in terms of atmosphere through pre-conscious ambient spatial processing. Furthermore, these separate ways of processing architectural stimuli operate in parallel throughout the visual perceptual system. Thus, a more comprehensive understanding of architecture must take into account that built environments are stimuli that are treated differently by focal and ambient vision, which enable intellectual analysis of architectural experience versus the experience of architectural atmosphere, respectively. We offer this theoretical model to help advance a more precise understanding of the

  1. Secure Service Oriented Architectures (SOA) Supporting NEC [Architecture orientée service (SOA) gérant la NEC

    NARCIS (Netherlands)

    Meiler, P.P.; Schmeing, M.

    2009-01-01

    Combined scenario ; Data management ; Data processing ; Demonstrator ; Information systems ; Integrated systems ; Interoperability ; Joint scenario ; Network Enabled Capability (NEC) ; Operational effectiveness ; Operations research ; Scenarios ; Secure communication ; Service Oriented Architecture

  2. Direct marketing and market communication process

    Directory of Open Access Journals (Sweden)

    Jovović Sanja

    2007-01-01

    Full Text Available Direct marketing is marketing which demands immediate reply. That reply can be an order, a request for an additional information, a registration, a telephone call or a visit. This work presents direct marketing as the most contemporary method of company communications with environs. A concept of direct marketing is made and aimed for complete identification of existing customers and for finding out potential customers. Mail, printed documents e-mail and new medias are used as modern communications channels. It is especially emphasizes the Internet as an important media.

  3. 基于AUTOSAR架构的通信系统的研究与实现%Research and Implementation of Communication System Based on AUTOSAR Architecture

    Institute of Scientific and Technical Information of China (English)

    蒋建春; 万莹; 易纲; 胡彬

    2011-01-01

    AUTOSAR是汽车开放系统体系结构,已成为汽车电子软件的工业标准,在汽车电子控制器系统开发过程中具有重要地位,其中AUTOSAR COM通信规范为汽车电子通信系统的构建提供了依据和参考;介绍了AUTOSAR体系架构,对AUTOSAR COM规范基于信号的通信机制及其特有的传输模式切换系统进行了研究,并实现了一种基于AUTOSAR架构的通信系统,试验结果表明该系统能够提供基本通信服务,且符合AUTOSAR COM规范.%AUTOSAR is Automotive Open System Architecture, now it has been the industry standard of the automotive electronic soft-vare, it plays an important role in the develepment process of the automotive electronic control system, and the AUTOSAR COM provides the Basis and reference for the construction of the automotive electronic communication system. The paper introduces the AUTOSAR architecture, and researches the signal -based Communication mechanism of AUTOSAR COM specification and the transmission mode switching system, and implements a communication system based on AUTOSAR architecture, the results show that the system can provide the basic communication services, and it conforms to the AUTOSAR COM specification.

  4. Robust E-Health Communication Architecture for Rural Communities in Developing Countries

    Directory of Open Access Journals (Sweden)

    F. E. Idachaba

    2012-06-01

    Full Text Available The lack of access to quality healthcare and the lack of sufficient manpower, especially doctors, in rural areas is a major healthcare challenge faced by dwellers in rural communities in most developing countries. The intervention of governments, which range from the introduction of training programs aimed at producing health workers from schools of health technology and nursing to the recalling and deployment of retired nurses to rural areas, has still not been able to generate the desired improvement in healthcare delivery, as outbreaks of epidemics are still being reported in such areas. This work presents an E-Health architecture which utilizes low cost sensors and communication devices to link the doctors in the urban areas with the patients in rural areas enabling doctors-patients interaction. The system enables accurate and timely diagnosis of the patients and facilitates proper treatment plans. It also incorporates an epidemic alert which enables the tracking of diseases and the early detection and control of epidemics.

  5. Knowledge in the Making. On Production and Communication of Knowledge in the Material Practices of Architecture

    Directory of Open Access Journals (Sweden)

    Fredrik Nilsson

    2013-11-01

    Full Text Available This article discusses some conceptualframeworks and notions used in, or with the potential to further develop,theories and understandings regarding the specific processes and forms ofknowledge in creative practices of architecture, design and art. Morearticulate conceptual frameworks are not only of importance for strengtheningdisciplines and practices, but can also make valid contributions in widersocietal contexts in relation to contemporary challenges in built environments.With the point of departure in the notions “material practice” by Stan Allenand “making disciplines” by Halina Dunin-Woyseth, theoretical frameworks andapproaches by, for example, Andrew Pickering, Nigel Cross, Albena Yaneva, andGilles Deleuze & Felix Guattari are discussed. The contemporary world hasbrought challenging societal developments and complex transformations of builtenvironments, but new tools have also enabled other forms of design experiments,including non-verbal languages and various model worlds. The article arguesthat we must constantly study the contemporary situation, but also reflect uponour means of designing and production, as well as our forms of working andcollaboration. New relationships between theory and practice, between researchand practical designing, between academia, architectural practice and differentactors in society, must be articulated and established through consciousstrategies.

  6. Organizational Socialization: Processes for New Communication Faculty.

    Science.gov (United States)

    Cawyer, Carol Stringer; Friedrich, Gustav W.

    1998-01-01

    Surveys a national sample of new faculty members in communication departments to identify features of organizational socialization. Examines perceptions of socialization for the job interview and the orientation activities. Finds that amount of time spent in orientation activities is the best predictor of satisfaction upon arrival. (SR)

  7. The Organizational Communication Process in Schools

    Science.gov (United States)

    Gunbayi, Ilhan

    2007-01-01

    This study examined the perceptions of teachers on the effectiveness of organizational communication in their schools and whether the perceptions differed between teachers in primary and junior high schools as a function of gender, age, marital status, seniority, and rank. Data were collected from a sample of 334 teachers in 63 schools, working in…

  8. Facilitating Software Architecting by Ranking Requirements based on their Impact on the Architecture Process

    NARCIS (Netherlands)

    Galster, Matthias; Eberlein, Armin; Sprinkle, J; Sterritt, R; Breitman, K

    2011-01-01

    Ranking software requirements helps decide what requirements to implement during a software development project, and when. Currently, requirements ranking techniques focus on resource constraints or stakeholder priorities and neglect the effect of requirements on the software architecture process. H

  9. Facilitating Software Architecting by Ranking Requirements based on their Impact on the Architecture Process

    NARCIS (Netherlands)

    Galster, Matthias; Eberlein, Armin; Sprinkle, J; Sterritt, R; Breitman, K

    2011-01-01

    Ranking software requirements helps decide what requirements to implement during a software development project, and when. Currently, requirements ranking techniques focus on resource constraints or stakeholder priorities and neglect the effect of requirements on the software architecture process.

  10. Wireless receiver architectures and design antennas, RF, synthesizers, mixed signal, and digital signal processing

    CERN Document Server

    Rouphael, Tony J

    2014-01-01

    Wireless Receiver Architectures and Design presents the various designs and architectures of wireless receivers in the context of modern multi-mode and multi-standard devices. This one-stop reference and guide to designing low-cost low-power multi-mode, multi-standard receivers treats analog and digital signal processing simultaneously, with equal detail given to the chosen architecture and modulating waveform. It provides a complete understanding of the receiver's analog front end and the digital backend, and how each affects the other. The book explains the design process in great detail, s

  11. The architecture of blind equalizer for MIMO free space optical communication system

    Science.gov (United States)

    Li, Hongwei; Huang, Yongmei

    2016-10-01

    communication are two important indexes. For a MIMO communication system, there are two typical equalization methods. The first method, every receiving antenna has an independent equalizer without the information derived from the other receiving antennas. The second, the information derived from all of the receiving antennas mixes with each other, according to some definite rules, which is called space-time equalization. The former is discussed in this paper. The equalization algorithm concludes training mode and non training mode. The training mode needs training codes transmitted by the transmitter during the whole communication process and this mode reduces the communication efficiency more or less. In order to improve the communication efficiency, the blind equalization algorithm, a non training mode, is used to solve the parameter of the equalizer. In this paper, firstly, the atmosphere channel is described focusing on the scintillation and multipath effect of the optical carrier. Then, the structure of a equalizer of MIMO free space optical communication system is introduced. In the next part of this paper, the principle of the blind equalization algorithm is introduced. In addition, the simulation results are showed. In the end of this paper, the conclusions and the future work are discussed.

  12. Automated Transformation of Distributed Software Architectural Models to Finite State Process

    Directory of Open Access Journals (Sweden)

    Omid Bushehrian,

    2010-12-01

    Full Text Available Software Performance Engineering (SPE represents the collection of software engineering activities with the purpose of identification, prediction and also improvement of software performance parameters in the early stages of software development life cycle. Various models such as queuing networks, layered queues, Petri Nets and Stochastic Process Algebras are suggested for modeling distributed systems. Particular ability of a model is the prediction and estimation of non-functional characteristic of one system before it has been made. The main problem is a method by which we can easily transform architectural software models into formal simulate able models.In this paper a method for automatic transformation of UML deployment and sequence diagrams into FSP(finite state process model is presented, so that we can analyze the resulting model through discrete event simulation tools from the performance perspective. In the proposed transformation algorithm, different aspects of a software system such as: communication model of software objects, synchronization and physical deployment of objects are considered.

  13. Linguistic and perceptual processing of communicative cues in Asperger Syndrome

    OpenAIRE

    Saalasti, Satu

    2012-01-01

    Asperger Syndrome (AS) belongs to autism spectrum disorders where both verbal and non-verbal communication difficulties are at the core of the impairment. Social communication requires a complex use of affective, linguistic-cognitive and perceptual processes. In the four studies included in the current thesis, some of the linguistic and perceptual factors that are important for face-to-face communication were studied using behavioural methods. In all four studies the results obtained from ind...

  14. Design and Implementation of an Efficient Software Communications Architecture Core Framework for a Digital Signal Processors Platform

    Directory of Open Access Journals (Sweden)

    Wael A. Murtada

    2011-01-01

    Full Text Available Problem statement: The Software Communications Architecture (SCA was developed to improve software reuse and interoperability in Software Defined Radios (SDR. However, there have been performance concerns since its conception. Arguably, the majority of the problems and inefficiencies associated with the SCA can be attributed to the assumption of modular distributed platforms relying on General Purpose Processors (GPPs to perform all signal processing. Approach: Significant improvements in cost and power consumption can be obtained by utilizing specialized and more efficient platforms. Digital Signal Processors (DSPs present such a platform and have been widely used in the communications industry. Improvements in development tools and middleware technology opened the possibility of fully integrating DSPs into the SCA. This approach takes advantage of the exceptional power, cost and performance characteristics of DSPs, while still enjoying the flexibility and portability of the SCA. Results: This study presents the design and implementation of an SCA Core Framework (CF for a TI TMS320C6416 DSP. The framework is deployed on a C6416 Device Cycle Accurate Simulator and TI C6416 Development board. The SCA CF is implemented by leveraging OSSIE, an open-source implementation of the SCA, to support the DSP platform. OIS’s ORBExpress DSP and DSP/BIOS are used as the middleware and operating system, respectively. A sample waveform was developed to demonstrate the framework’s functionality. Benchmark results for the framework and sample applications are provided. Conclusion: Benchmark results show that, using OIS ORBExpress DSP ORB middleware has an impact for decreasing the Software Memory Footprint and increasing the System Performance compared with PrismTech's e*ORB middleware.

  15. Communicating Nursing Care Using the Health Level Seven Consolidated Clinical Document Architecture Release 2 Care Plan.

    Science.gov (United States)

    Matney, Susan A; Dolin, Gay; Buhl, Lindy; Sheide, Amy

    2016-03-01

    A care plan provides a patient, family, or community picture and outlines the care to be provided. The Health Level Seven Consolidated Clinical Document Architecture (C-CDA) Release 2 Care Plan Document is used to structure care plan data when sharing the care plan between systems and/or settings. The American Nurses Association has recommended the use of two terminologies, Logical Observation Identifiers Names and Codes (LOINC) for assessments and outcomes and Systematized Nomenclature of Medicine-Clinical Terms (SNOMED CT) for problems, procedures (interventions), outcomes, and observation findings within the C-CDA. This article describes C-CDA, introduces LOINC and SNOMED CT, discusses how the C-CDA Care Plan aligns with the nursing process, and illustrates how nursing care data can be structured and encoded within a C-CDA Care Plan.

  16. Using Reporting in the Internal Communication Process of the Company

    Directory of Open Access Journals (Sweden)

    Cornel Marian Iosif

    2013-07-01

    Full Text Available Internal communication can be regarded either as a subsistent process of the organization, or as a process helping to decode and more easily understand them. Organizations are based on the internal communication process, because without it, information, ideas could not be sent, the organization’s goals and values could not be built, and its organizational culture would simply not exist. The internal communication process is centered on sending ideas, information in the organization. This is directly proportional with the efficiency of the organization. Internal communication allows for the best decision to be taken, for information to be sent towards the interior of the company, towards the employees, but also has the purpose of strengthening the relations between persons. Internal communication has at its basis the verbal and non-verbal communication, but they have great disadvantages, because: verbal communication has losses of information, depends on the moment of transmission, but also on the receiver.Keywords: report, internal communication, neuro linguistic programming, company

  17. A Resource-Efficient Communication Architecture for Chip Multiprocessors on FPGAs

    Institute of Scientific and Technical Information of China (English)

    Xiaofang(Maggie)Wang; Swetha Thota

    2011-01-01

    Significant advances in field-programmable gate arrays (FPGAs) have made it viable to explore innovative multiprocessor solutions on a single FPGA chip. For multiprocessors, an efficient communication network that matches the needs of the target application is always critical to the overall performance. Wormhole packet-switching network-on-chip (NoC) solutions are replacing conventional shared buses to deal with scalability and complexity challenges coming along with the increasing number of processing elements (PEs). However, the quest for high performance networks has led to very complex and resource-expensive NoC designs, leaving little room for the real computing force, i.e., PEs. Moreover, many techniques offer very small performance gains or none at all when network traffic is light while increasing the resource usage of routers. We argue that computation is still the primary task of multiprocessors and sufficient resources should be reserved for PEs. This paper presents our novel design and implementation of a resource-efficient communication network for multiprocessors on FPGAs. We reduce not only the required number of touters for a given number of PEs by introducing a new PE-router topology, but also the resource requirement of each router. Our communication network relies on the NEWS channels to transfer packets in a pipelined fashion following the path determined by the routing network. The implementation results on various Xilinx FPCAs show good performance in the typical range of network load for multiprocessor applications.

  18. 2D Material Device Architectures: Process Optimisation and Characterisation

    DEFF Research Database (Denmark)

    Gammelgaard, Lene

    encapsulated in hexagonal boron nitride have been fabricated and studied electrically. These devices have field-effect mobilities comparable with the highest values reported. Furthermore, state of the art nano-patterns have been fabricated into encapsulated graphene. It was also explore how graphene layers...... perform as tunable contacts to transition metal dichalcogenides layers encapsulated in hexagonal boron nitride. This architecture yields high performance devices, where high mobilities of the air sensitive MoTe2 crystals have measured, and metal-insulator transition have been observed in monolayer MoS2...... devices. Additionally, the long-term stability of transition metal dichalcogenides has been studied, and the order of the layers has been demonstrated detectable by atomic force microscopy. The encapsulated van der Waals heterostructures give high performance and long-term stability of two...

  19. An Architecture for Real-Time Processing of OSIRIS-REx Engineering and Science Data, from Raw Telemetry to PDS

    Science.gov (United States)

    Selznick, S. H.

    2017-06-01

    Herein we describe an architecture developed for processing engineering and science data for the OSIRIS-REx mission. The architecture is soup-to-nuts, starting with raw telemetry and ending with submission to PDS.

  20. Model-based system-of-systems engineering for space-based command, control, communication, and information architecture design

    Science.gov (United States)

    Sindiy, Oleg V.

    This dissertation presents a model-based system-of-systems engineering (SoSE) approach as a design philosophy for architecting in system-of-systems (SoS) problems. SoS refers to a special class of systems in which numerous systems with operational and managerial independence interact to generate new capabilities that satisfy societal needs. Design decisions are more complicated in a SoS setting. A revised Process Model for SoSE is presented to support three phases in SoS architecting: defining the scope of the design problem, abstracting key descriptors and their interrelations in a conceptual model, and implementing computer-based simulations for architectural analyses. The Process Model enables improved decision support considering multiple SoS features and develops computational models capable of highlighting configurations of organizational, policy, financial, operational, and/or technical features. Further, processes for verification and validation of SoS models and simulations are also important due to potential impact on critical decision-making and, thus, are addressed. Two research questions frame the research efforts described in this dissertation. The first concerns how the four key sources of SoS complexity---heterogeneity of systems, connectivity structure, multi-layer interactions, and the evolutionary nature---influence the formulation of SoS models and simulations, trade space, and solution performance and structure evaluation metrics. The second question pertains to the implementation of SoSE architecting processes to inform decision-making for a subset of SoS problems concerning the design of information exchange services in space-based operations domain. These questions motivate and guide the dissertation's contributions. A formal methodology for drawing relationships within a multi-dimensional trade space, forming simulation case studies from applications of candidate architecture solutions to a campaign of notional mission use cases, and

  1. Nanorack Compatible Standardized Data Processing, Communication, and Control Module Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Phase I study will design and develop a NanoRacks Control Module (NCM) that provides communications, control functions and data processing in a NanoRacks...

  2. Selection of a Data Acquisition and Controls System Communications and Software Architecture for Johnson Space Center's Space Environment Simulation Laboratory Thermal and Vacuum Test Facilities

    Science.gov (United States)

    Jordan, Eric A.

    2004-01-01

    Upgrade of data acquisition and controls systems software at Johnson Space Center's Space Environment Simulation Laboratory (SESL) involved the definition, evaluation and selection of a system communication architecture and software components. A brief discussion of the background of the SESL and its data acquisition and controls systems provides a context for discussion of the requirements for each selection. Further framework is provided as upgrades to these systems accomplished in the 1990s and in 2003 are compared to demonstrate the role that technological advances have had in their improvement. Both of the selections were similar in their three phases; 1) definition of requirements, 2) identification of candidate products and their evaluation and testing and 3) selection by comparison of requirement fulfillment. The candidates for the communication architecture selection embraced several different methodologies which are explained and contrasted. Requirements for this selection are presented and the selection process is described. Several candidates for the software component of the data acquisition and controls system are identified, requirements for evaluation and selection are presented, and the evaluation process is described.

  3. Selection of a Data Acquisition and Controls System Communications and Software Architecture for Johnson Space Center's Space Environment Simulation Laboratory Thermal and Vacuum Test Facilities

    Science.gov (United States)

    Jordan, Eric A.

    2004-01-01

    Upgrade of data acquisition and controls systems software at Johnson Space Center's Space Environment Simulation Laboratory (SESL) involved the definition, evaluation and selection of a system communication architecture and software components. A brief discussion of the background of the SESL and its data acquisition and controls systems provides a context for discussion of the requirements for each selection. Further framework is provided as upgrades to these systems accomplished in the 1990s and in 2003 are compared to demonstrate the role that technological advances have had in their improvement. Both of the selections were similar in their three phases; 1) definition of requirements, 2) identification of candidate products and their evaluation and testing and 3) selection by comparison of requirement fulfillment. The candidates for the communication architecture selection embraced several different methodologies which are explained and contrasted. Requirements for this selection are presented and the selection process is described. Several candidates for the software component of the data acquisition and controls system are identified, requirements for evaluation and selection are presented, and the evaluation process is described.

  4. Real-time recursive hyperspectral sample and band processing algorithm architecture and implementation

    CERN Document Server

    Chang, Chein-I

    2017-01-01

    This book explores recursive architectures in designing progressive hyperspectral imaging algorithms. In particular, it makes progressive imaging algorithms recursive by introducing the concept of Kalman filtering in algorithm design so that hyperspectral imagery can be processed not only progressively sample by sample or band by band but also recursively via recursive equations. This book can be considered a companion book of author’s books, Real-Time Progressive Hyperspectral Image Processing, published by Springer in 2016. Explores recursive structures in algorithm architecture Implements algorithmic recursive architecture in conjunction with progressive sample and band processing Derives Recursive Hyperspectral Sample Processing (RHSP) techniques according to Band-Interleaved Sample/Pixel (BIS/BIP) acquisition format Develops Recursive Hyperspectral Band Processing (RHBP) techniques according to Band SeQuential (BSQ) acquisition format for hyperspectral data.

  5. A configurable process for design of object-oriented software architectures

    DEFF Research Database (Denmark)

    lønvig, Birgitte

    combinations of problems and solutions in a number of different domains. The workflow of how to configure a process for a domain is although applicable for different domains. The software architecture design process is based on a general conceptual framework consisting of domain characteristics, requirements......When we design large complex software systems, such as systems in the telecommunications world, and we follow one of the standard object-oriented methods or processes, we end up with a system that fulfills the requirements of functionality. However, it is difficult to ensure that other requirements......, such as modifiability and reusability, are fulfilled. Furthermore the architecture is not explicitly described and is therefore difficult to comprehend. This Ph. D. dissertation defines a configurable process for design of object-oriented software architectures. The process can be regarded as an extension to standard...

  6. CIB: an improved communication architecture for real-time monitoring of aerospace materials, instruments, and sensors on the ISS.

    Science.gov (United States)

    Krasowski, Michael J; Prokop, Norman F; Flatico, Joseph M; Greer, Lawrence C; Jenkins, Phillip P; Neudeck, Philip G; Chen, Liangyu; Spina, Danny C

    2013-01-01

    The Communications Interface Board (CIB) is an improved communications architecture that was demonstrated on the International Space Station (ISS). ISS communication interfaces allowing for real-time telemetry and health monitoring require a significant amount of development. The CIB simplifies the communications interface to the ISS for real-time health monitoring, telemetry, and control of resident sensors or experiments. With a simpler interface available to the telemetry bus, more sensors or experiments may be flown. The CIB accomplishes this by acting as a bridge between the ISS MIL-STD-1553 low-rate telemetry (LRT) bus and the sensors allowing for two-way command and telemetry data transfer. The CIB was designed to be highly reliable and radiation hard for an extended flight in low Earth orbit (LEO) and has been proven with over 40 months of flight operation on the outside of ISS supporting two sets of flight experiments. Since the CIB is currently operating in flight on the ISS, recent results of operations will be provided. Additionally, as a vehicle health monitoring enabling technology, an overview and results from two experiments enabled by the CIB will be provided. Future applications for vehicle health monitoring utilizing the CIB architecture will also be discussed.

  7. Dual-Stack Single-Radio Communication Architecture for UAV Acting As a Mobile Node to Collect Data in WSNs

    Science.gov (United States)

    Sayyed, Ali; Medeiros de Araújo, Gustavo; Bodanese, João Paulo; Buss Becker, Leandro

    2015-01-01

    The use of mobile nodes to collect data in a Wireless Sensor Network (WSN) has gained special attention over the last years. Some researchers explore the use of Unmanned Aerial Vehicles (UAVs) as mobile node for such data-collection purposes. Analyzing these works, it is apparent that mobile nodes used in such scenarios are typically equipped with at least two different radio interfaces. The present work presents a Dual-Stack Single-Radio Communication Architecture (DSSRCA), which allows a UAV to communicate in a bidirectional manner with a WSN and a Sink node. The proposed architecture was specifically designed to support different network QoS requirements, such as best-effort and more reliable communications, attending both UAV-to-WSN and UAV-to-Sink communications needs. DSSRCA was implemented and tested on a real UAV, as detailed in this paper. This paper also includes a simulation analysis that addresses bandwidth consumption in an environmental monitoring application scenario. It includes an analysis of the data gathering rate that can be achieved considering different UAV flight speeds. Obtained results show the viability of using a single radio transmitter for collecting data from the WSN and forwarding such data to the Sink node. PMID:26389911

  8. Dual-Stack Single-Radio Communication Architecture for UAV Acting As a Mobile Node to Collect Data in WSNs.

    Science.gov (United States)

    Sayyed, Ali; de Araújo, Gustavo Medeiros; Bodanese, João Paulo; Becker, Leandro Buss

    2015-09-16

    The use of mobile nodes to collect data in a Wireless Sensor Network (WSN) has gained special attention over the last years. Some researchers explore the use of Unmanned Aerial Vehicles (UAVs) as mobile node for such data-collection purposes. Analyzing these works, it is apparent that mobile nodes used in such scenarios are typically equipped with at least two different radio interfaces. The present work presents a Dual-Stack Single-Radio Communication Architecture (DSSRCA), which allows a UAV to communicate in a bidirectional manner with a WSN and a Sink node. The proposed architecture was specifically designed to support different network QoS requirements, such as best-effort and more reliable communications, attending both UAV-to-WSN and UAV-to-Sink communications needs. DSSRCA was implemented and tested on a real UAV, as detailed in this paper. This paper also includes a simulation analysis that addresses bandwidth consumption in an environmental monitoring application scenario. It includes an analysis of the data gathering rate that can be achieved considering different UAV flight speeds. Obtained results show the viability of using a single radio transmitter for collecting data from the WSN and forwarding such data to the Sink node.

  9. Dual-Stack Single-Radio Communication Architecture for UAV Acting As a Mobile Node to Collect Data in WSNs

    Directory of Open Access Journals (Sweden)

    Ali Sayyed

    2015-09-01

    Full Text Available The use of mobile nodes to collect data in a Wireless Sensor Network (WSN has gained special attention over the last years. Some researchers explore the use of Unmanned Aerial Vehicles (UAVs as mobile node for such data-collection purposes. Analyzing these works, it is apparent that mobile nodes used in such scenarios are typically equipped with at least two different radio interfaces. The present work presents a Dual-Stack Single-Radio Communication Architecture (DSSRCA, which allows a UAV to communicate in a bidirectional manner with a WSN and a Sink node. The proposed architecture was specifically designed to support different network QoS requirements, such as best-effort and more reliable communications, attending both UAV-to-WSN and UAV-to-Sink communications needs. DSSRCA was implemented and tested on a real UAV, as detailed in this paper. This paper also includes a simulation analysis that addresses bandwidth consumption in an environmental monitoring application scenario. It includes an analysis of the data gathering rate that can be achieved considering different UAV flight speeds. Obtained results show the viability of using a single radio transmitter for collecting data from the WSN and forwarding such data to the Sink node.

  10. 4th International Conference on Communications, Signal Processing, and Systems

    CERN Document Server

    Mu, Jiasong; Wang, Wei; Zhang, Baoju

    2016-01-01

    This book brings together papers presented at the 4th International Conference on Communications, Signal Processing, and Systems, which provides a venue to disseminate the latest developments and to discuss the interactions and links between these multidisciplinary fields. Spanning topics ranging from Communications, Signal Processing and Systems, this book is aimed at undergraduate and graduate students in Electrical Engineering, Computer Science and Mathematics, researchers and engineers from academia and industry as well as government employees (such as NSF, DOD, DOE, etc).

  11. Distributed architecture and distributed processing mode in urban sewage treatment

    Science.gov (United States)

    Zhou, Ruipeng; Yang, Yuanming

    2017-05-01

    Decentralized rural sewage treatment facility over the broad area, a larger operation and management difficult, based on the analysis of rural sewage treatment model based on the response to these challenges, we describe the principle, structure and function in networking technology and network communications technology as the core of distributed remote monitoring system, through the application of case analysis to explore remote monitoring system features in a decentralized rural sewage treatment facilities in the daily operation and management. Practice shows that the remote monitoring system to provide technical support for the long-term operation and effective supervision of the facilities, and reduced operating, maintenance and supervision costs for development.

  12. Artefact specification, design, and production as a process of communication

    DEFF Research Database (Denmark)

    Galle, Per

    1999-01-01

    for the success of communication carry over to the artefact production process. The purpose of the analysis is to provide a conceptual background for the study of various aspects of artefact production, such as design, or the development of computer-based tools for collaborative design, product modelling......The co-operative process of specifying, designing, and producing an artefact is analysed in terms of communication among the agents involved. By way of introduction, I offer a brief analysis of communication in general, outlining conditions for its success, while avoiding simplistic assumptions...

  13. Business Communication: Its Process and Product.

    Science.gov (United States)

    Bowman, Joel P.; Branchaw, Bernadine P.

    1987-01-01

    Discusses the essential difference between the writing process and its product; namely, that the former is a private and unique activity, whereas the latter is an observable artifact that can be publicly evaluated. Argues that even proponents of the process approach to writing cannot escape basing their discussions on products. (JD)

  14. The LHCb Data Acquisition and High Level Trigger Processing Architecture

    Science.gov (United States)

    Frank, M.; Gaspar, C.; Jost, B.; Neufeld, N.

    2015-12-01

    The LHCb experiment at the LHC accelerator at CERN collects collisions of particle bunches at 40 MHz. After a first level of hardware trigger with an output rate of 1 MHz, the physically interesting collisions are selected by running dedicated trigger algorithms in the High Level Trigger (HLT) computing farm. This farm consists of up to roughly 25000 CPU cores in roughly 1750 physical nodes each equipped with up to 4 TB local storage space. This work describes the LHCb online system with an emphasis on the developments implemented during the current long shutdown (LS1). We will elaborate the architecture to treble the available CPU power of the HLT farm and the technicalities to determine and verify precise calibration and alignment constants which are fed to the HLT event selection procedure. We will describe how the constants are fed into a two stage HLT event selection facility using extensively the local disk buffering capabilities on the worker nodes. With the installed disk buffers, the CPU resources can be used during periods of up to ten days without beams. These periods in the past accounted to more than 70% of the total time.

  15. Development of a multitechnology FPGA: a reconfigurable architecture for photonic information processing

    Science.gov (United States)

    Mal, Prosenjit; Toshniwal, Kavita; Hawk, Chris; Bhadri, Prashant R.; Beyette, Fred R., Jr.

    2004-06-01

    Over the years, Field Programmable Gate Arrays (FPGAs) have made a profound impact on the electronics industry with rapidly improving semiconductor-manufacturing technology ranging from sub-micron to deep sub-micron processes and equally innovative CAD tools. Though FPGA has revolutionized programmable/reconfigurable digital logic technology, one limitation of current FPGA"s is that the user is limited to strictly electronic designs. Thus, they are not suitable for applications that are not purely electronic, such as optical communications, photonic information processing systems and other multi-technology applications (ex. analog devices, MEMS devices and microwave components). Over recent years, the growing trend has been towards the incorporation of non-traditional device technologies into traditional CMOS VLSI systems. The integration of these technologies requires a new kind of FPGA that can merge conventional FPGA technology with photonic and other multi-technology devices. The proposed new class of field programmable device will extend the flexibility, rapid prototyping and reusability benefits associated with conventional electronic into photonic and multi-technology domain and give rise to the development of a wider class of programmable and embedded integrated systems. This new technology will create a tremendous opportunity for applying the conventional programmable/reconfigurable hardware concepts in other disciplines like photonic information processing. To substantiate this novel architectural concept, we have fabricated proof-of-the-concept CMOS VLSI Multi-technology FPGA (MT-FPGA) chips that include both digital field programmable logic blocks and threshold programmable photoreceivers which are suitable for sensing optical signals. Results from these chips strongly support the feasibility of this new optoelectronic device concept.

  16. A New Intelligence Communication Network Architecture%一种新的智能通信网络结构

    Institute of Scientific and Technical Information of China (English)

    李磊; 施鸿宝

    2001-01-01

    随着数据业务在通信网的不断增加,未来的通信网必将以数据网络(包交换)为主导,而现有的以电路交换为基础的电话网还将在很长一段时间内存在.为有效地集成数据网与电话网,提出了一种新的话音/数据网络集成结构--智能通信网络结构,在数据网上扩充了类似于电话网信令控制系统的控制层,定义了控制层的各个组成部分及其研究内容,进一步研究该结构对向未来通信网平滑过渡具有积极意义.%While the demand for data grows rapidly in the communication network, the data network technology(packet switch) will dominant the future communication network. But the traditional telephone network(circuit switch) will still exist for a long time. In order to converge data network and telephone network effectively, this paper proposes a new voice/data integration architecture named Intelligence Communication Network Architecture(ICNA) which has a separate control infrastructure for the data network. The paper defines the components and their functions of this control layer. We hope this architecture will help the smooth migration to the future communication network.

  17. Digital signal processing in communication systems

    CERN Document Server

    Frerking, Marvin E

    1994-01-01

    An engineer's introduction to concepts, algorithms, and advancements in Digital Signal Processing. This lucidly written resource makes extensive use of real-world examples as it covers all the important design and engineering references.

  18. Gaussian Process Techniques for Wireless Communications

    CERN Document Server

    Han, Mr Chong; Peters, Dr Gareth; Yuan, Prof Jinhong

    2010-01-01

    Bayesian filtering is a general framework for recursively estimating the state of a dynamical system. Classical solutions such that Kalman filter and Particle filter are introduced in this report. Gaussian processes have been introduced as a non-parametric technique for system estimation from supervision learning. For the thesis project, we intend to propose a new, general methodology for inference and learning in non-linear state-space models probabilistically incorporating with the Gaussian process model estimation.

  19. An architecture for EEG signal processing and interpretation during sleep (ESPIS).

    Science.gov (United States)

    Toussaint, M; Schaltenbrand, N; Paiva, T; Pollmacher, T; Pflieger, C; Luthringer, R; Macher, J P

    1994-10-01

    The project's aim is to develop a dedicated workstation in order to process multiple channels of electrophysiological signals in real-time during sleep. In ESPIS we are aiming to define both an architecture and an environment for EEG signal interpretation in medicine based on computer science gold standards (Unix, XWindow, Motif). Signal processing and pattern recognition analysis are provided by parallel processing on a specific developed acquisition architecture (DSP) based on transputers. The main result is a high performance prototype demonstrating signal interpretation during sleep which has already been tested in a medical environment. The overall specifications allow this biomedical device to be extended to other types of medical signals.

  20. Combining a Multi-Agent System and Communication Middleware for Smart Home Control: A Universal Control Platform Architecture

    Directory of Open Access Journals (Sweden)

    Song Zheng

    2017-09-01

    Full Text Available In recent years, the smart home field has gained wide attention for its broad application prospects. However, families using smart home systems must usually adopt various heterogeneous smart devices, including sensors and devices, which makes it more difficult to manage and control their home system. How to design a unified control platform to deal with the collaborative control problem of heterogeneous smart devices is one of the greatest challenges in the current smart home field. The main contribution of this paper is to propose a universal smart home control platform architecture (IAPhome based on a multi-agent system and communication middleware, which shows significant adaptability and advantages in many aspects, including heterogeneous devices connectivity, collaborative control, human-computer interaction and user self-management. The communication middleware is an important foundation to design and implement this architecture which makes it possible to integrate heterogeneous smart devices in a flexible way. A concrete method of applying the multi-agent software technique to solve the integrated control problem of the smart home system is also presented. The proposed platform architecture has been tested in a real smart home environment, and the results indicate that the effectiveness of our approach for solving the collaborative control problem of different smart devices.

  1. Integrated and Modular Design of an Optimized Process Architecture

    Directory of Open Access Journals (Sweden)

    Colin Raßfeld

    2013-07-01

    Full Text Available Global economic integration increased the complexity of business activities, so organizations are forced to become more efficient each day. Process organization is a very useful way of aligning organizational systems towards business processes. However, an organization must do more than just focus its attention and efforts on processes. The layout design has also a significant impact on the system performance.. We contribute to this field by developing a tailored process-oriented organizational structure and new layout design for the quality assurance of a leading German automotive manufacturer. The target concept we developed was evaluated by process owners and an IT-based process simulation. Our results provide solid empirical back-up in which the performance and effects are  assessed from a qualitative and quantitative perspective

  2. All-optical signal processing data communication and storage applications

    CERN Document Server

    Eggleton, Benjamin

    2015-01-01

    This book provides a comprehensive review of the state-of-the art of optical signal processing technologies and devices. It presents breakthrough solutions for enabling a pervasive use of optics in data communication and signal storage applications. It presents presents optical signal processing as solution to overcome the capacity crunch in communication networks. The book content ranges from the development of innovative materials and devices, such as graphene and slow light structures, to the use of nonlinear optics for secure quantum information processing and overcoming the classical Shannon limit on channel capacity and microwave signal processing. Although it holds the promise for a substantial speed improvement, today’s communication infrastructure optics remains largely confined to the signal transport layer, as it lags behind electronics as far as signal processing is concerned. This situation will change in the near future as the tremendous growth of data traffic requires energy efficient and ful...

  3. 6th International Image Processing and Communications Conference

    CERN Document Server

    2015-01-01

    This book collects a series of research papers in the area of Image Processing and Communications which not only introduce a summary of current technology but also give an outlook of potential feature problems in this area. The key objective of the book is to provide a collection of comprehensive references on some recent theoretical development as well as novel applications in image processing and communications. The book is divided into two parts and presents the proceedings of the 6th International Image Processing and Communications Conference (IP&C 2014) held in Bydgoszcz, 10-12 September 2014. Part I deals with image processing. A comprehensive survey of different methods  of image processing, computer vision  is also presented. Part II deals with the telecommunications networks and computer networks. Applications in these areas are considered.

  4. 8th International Image Processing and Communications Conference

    CERN Document Server

    2017-01-01

    This book collects a series of research papers in the area of Image Processing and Communications which not only introduce a summary of current technology but also give an outlook of potential feature problems in this area. The key objective of the book is to provide a collection of comprehensive references on some recent theoretical development as well as novel applications in image processing and communications. The book is divided into two parts and presents the proceedings of the 8th International Image Processing and Communications Conference (IP&C 2016) held in Bydgoszcz, Poland September 7-9 2016. Part I deals with image processing. A comprehensive survey of different methods of image processing, computer vision is also presented. Part II deals with the telecommunications networks and computer networks. Applications in these areas are considered.

  5. A Hybrid FPGA/Coarse Parallel Processing Architecture for Multi-modal Visual Feature Descriptors

    DEFF Research Database (Denmark)

    Jensen, Lars Baunegaard With; Kjær-Nielsen, Anders; Alonso, Javier Díaz

    2008-01-01

    This paper describes the hybrid architecture developed for speeding up the processing of so-called multi-modal visual primitives which are sparse image descriptors extracted along contours. In the system, the first stages of visual processing are implemented on FPGAs due to their highly parallel...

  6. Using Multiple FPGA Architectures for Real-time Processing of Low-level Machine Vision Functions

    Science.gov (United States)

    Thomas H. Drayer; William E. King; Philip A. Araman; Joseph G. Tront; Richard W. Conners

    1995-01-01

    In this paper, we investigate the use of multiple Field Programmable Gate Array (FPGA) architectures for real-time machine vision processing. The use of FPGAs for low-level processing represents an excellent tradeoff between software and special purpose hardware implementations. A library of modules that implement common low-level machine vision operations is presented...

  7. COMMUNICATION IN THE CONTEXT OF THE NEGOTIATION PROCESS

    Directory of Open Access Journals (Sweden)

    Ana-Maria STOICA (MIHALI

    2014-06-01

    Full Text Available The aim of the present paper is to highlight the way in which communication reflects in the negotiation process. Negotiation is known as the oldest means of communication that leads to the development of human relationships, continuously adjusting them to the values that are imposed when an agreement is desired regarding their observance/enforcement. It is unanimously accepted that negotiation is carried out essentially through communication. During the negotiation process information and knowledge is transmitted and received by the participants. The messages that are thus generated are subsequently used in arguments and counterarguments and serve to the purpose of imposing the transmitter’s interests in the content of the agreements that might be reached with the receiver. The way in which communication is carried out in the process of negotiation helps to reveal feelings and concerns, attitudes, convictions, beliefs, temperament and character traits, taking up an offensive or defensive position, as well as other aspects of the interlocutors’ behavior. The above-mentioned aspects allow stating that during the negotiation process one deals with oral or written communication, non-verbal communication, as well as with the so-called „marketing communication”.

  8. A learnable parallel processing architecture towards unity of memory and computing.

    Science.gov (United States)

    Li, H; Gao, B; Chen, Z; Zhao, Y; Huang, P; Ye, H; Liu, L; Liu, X; Kang, J

    2015-08-14

    Developing energy-efficient parallel information processing systems beyond von Neumann architecture is a long-standing goal of modern information technologies. The widely used von Neumann computer architecture separates memory and computing units, which leads to energy-hungry data movement when computers work. In order to meet the need of efficient information processing for the data-driven applications such as big data and Internet of Things, an energy-efficient processing architecture beyond von Neumann is critical for the information society. Here we show a non-von Neumann architecture built of resistive switching (RS) devices named "iMemComp", where memory and logic are unified with single-type devices. Leveraging nonvolatile nature and structural parallelism of crossbar RS arrays, we have equipped "iMemComp" with capabilities of computing in parallel and learning user-defined logic functions for large-scale information processing tasks. Such architecture eliminates the energy-hungry data movement in von Neumann computers. Compared with contemporary silicon technology, adder circuits based on "iMemComp" can improve the speed by 76.8% and the power dissipation by 60.3%, together with a 700 times aggressive reduction in the circuit area.

  9. 77 FR 58576 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers...

    Science.gov (United States)

    2012-09-21

    ... COMMISSION Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers, and... importation of certain wireless communication devices, portable music and data processing devices, computers... after importation of certain wireless communication devices, portable music and data processing...

  10. Reduced-Complexity Wireless Transceiver Architectures and Techniques for Space-Time Communications

    DEFF Research Database (Denmark)

    Tsakalaki, Elpiniki

    2012-01-01

    while enhancing the communication and spectrum sensing performance under non-ideal propagation conditions. The combined signal and antenna models derived throughout the dissertation are generic with respect to their applicability to any kind of reconfigurable, adaptive, parasitic and tunable RF systems...... lowcomplexity agile and steerable single-radio reactance-assisted antennas. In this context, the control ports are employed for altering both the frequency and the spatial response of the antenna. The thesis further examines the spectrum sensing performance enhancement using such reconfigurable antenna systems......The dissertation sheds light on the performance gains of multi-antenna systems when the antenna aspects and the associated signal processing and coding aspects are integrated together in a multidisciplinary approach, addressing a variety of challenging tasks pertaining to the joint design of smart...

  11. MF-CRA: Multi-Function Cognitive Radio Architecture for Space Communications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — EpiSys Science, Inc. and University of Arizona propose to develop, implement, and demonstrate Multi-Function Cognitive Radio Architecture (MF-CRA) for Space...

  12. Using Reframing in the External Communication Process of the Organization

    Directory of Open Access Journals (Sweden)

    Cornel Marian Iosif

    2014-07-01

    Full Text Available Any organization, in order to avoid an information attack from the external environment, creates connections with key persons: leaders of opinion, administrators of rival companies, local officials. There are three types of external communication: operational, strategic and promotional. In the communication process there are at least three categories of barriers: language barriers, perception and environment barriers. Using reframing in the external communication allows its adjustment and optimization in order to send a certain message as correctly as possible. Using reframing allows for a certain situation to be approaches from different angles, it allows a better adaptation of the employees‘ behaviours to the environment, of the organization or customers‘ needs.

  13. Communication as group process mediator of aircrew performance

    Science.gov (United States)

    Kanki, Barbara G.; Foushee, H. Clayton

    1989-01-01

    Considering recent operating experience as a group-level input factor, aspects of the communication process between crewmembers (captain and first officer) were explored as a possible mediator to performance. Communication patterns were defined by a speech-act typology adapted for the flight-deck setting and distinguished crews that had previously flown together (FT) from those that had not flown together (NFT). A more open communication channel and greater first officer participation in task-related topics was shown by FT crews, while NFT crews engaged in more nontask discourse.

  14. Communication as group process mediator of aircrew performance

    Science.gov (United States)

    Kanki, Barbara G.; Foushee, H. Clayton

    1989-01-01

    Considering recent operating experience as a group-level input factor, aspects of the communication process between crewmembers (captain and first officer) were explored as a possible mediator to performance. Communication patterns were defined by a speech-act typology adapted for the flight-deck setting and distinguished crews that had previously flown together (FT) from those that had not flown together (NFT). A more open communication channel and greater first officer participation in task-related topics was shown by FT crews, while NFT crews engaged in more nontask discourse.

  15. An architecture and protocol for communications satellite constellations regarded as multi-agent systems

    Science.gov (United States)

    Lindley, Craig A.

    1995-05-01

    This paper presents an architecture for satellites regarded as intercommunicating agents. The architecture is based upon a postmodern paradigm of artificial intelligence in which represented knowledge is regarded as text, inference procedures are regarded as social discourse and decision making conventions and the semantics of representations are grounded in the situated behaviour and activity of agents. A particular protocol is described for agent participation in distributed search and retrieval operations conducted as joint activities.

  16. An architecture and protocol for communications satellite constellations regarded as multi-agent systems

    Science.gov (United States)

    Lindley, Craig A.

    1995-01-01

    This paper presents an architecture for satellites regarded as intercommunicating agents. The architecture is based upon a postmodern paradigm of artificial intelligence in which represented knowledge is regarded as text, inference procedures are regarded as social discourse and decision making conventions and the semantics of representations are grounded in the situated behaviour and activity of agents. A particular protocol is described for agent participation in distributed search and retrieval operations conducted as joint activities.

  17. Processing of Communication Signal Using Operational Transconductance Amplifier

    OpenAIRE

    Roy, A.; Ghosh, K.; Mondal, S; Ray, B. N.

    2010-01-01

    This paper proposes a signal processing methodology of communication system and realized that circuits using operational transconductance amplifier (OTA). Two important classes of communication circuit, delta modulator and compander have been designed using that procedure. In the first implementation coded pulse modulation system is demonstrated which employ sampling, quantizing and coding to convert analog waveforms to digital signals while the second gives data compression and expansion in ...

  18. Space-Time Processing Applications for Wireless Communications

    OpenAIRE

    Hult, Tommy

    2008-01-01

    Wireless mobile communication networks are rapidly growing at an incredible rate around the world and a number of improved and emerging technologies are seen to be critical to the improved economics and performance of these networks. The technical revolution and continuing growth of mobile radio communication systems has been made possible by extraordinary advances in the related fields of digital computing, high-speed circuit technology, the Internet and, of course, digital signal processing...

  19. The communication of heritage: Assessment of the communicative process in museums of Asturias

    Directory of Open Access Journals (Sweden)

    Miguel Ángel SUÁREZ SUÁREZ

    2017-06-01

    Full Text Available Communicating of heritage, especially in museums, is a complex process due to certain particularities. Each museum is unique because of the diversity of objects, the discourses generated and the interactions between different audiences. It makes it difficult to build theories which help to understand and improve the communicative process with in the museum context. In this way, from prior studies and through both a direct observation and monitoring of the guided visits, this work shows the analysis of 7 museums from Asturias, focusing on the spatial distribution, the museography and the interventions of the teachers and students. The results show that museums are making an ef-fort to set up multidirectional communication models, doing a coherent design between exhibition spaces, the ob-jects’ museography and the teachers’ explanation. Nevertheless, there are some problems which impede a full con-nection between the school and the museum, which limit the effective communication of the message about herit-age.

  20. Finite volume method room acoustic simulations integrated into the architectural design process

    DEFF Research Database (Denmark)

    Pind Jörgensson, Finnur Kári; Jeong, Cheol-Ho; Engsig-Karup, Allan Peter

    2017-01-01

    with the architectural design from the earliest design stage, as a part of a holistic design process. A new procedure to integrate room acoustics into architectural design is being developed in a Ph.D. project, with the aim of promoting this early stage holistic design process. This project aims to develop a new hybrid......In many cases, room acoustics are neglected during the early stage of building design. This can result in serious acoustical problems that could have been easily avoided and can be difficult or expensive to remedy at later stages. Ideally, the room acoustic design should interact...

  1. Strategic Planning for a Communication Department: Process and Promise.

    Science.gov (United States)

    Konsky, Catherine

    1999-01-01

    Discusses advantages of creating a strategic plan, steps for the strategic-planning process, and application of the strategic-planning process. Suggests that communication departments should develop a strategic plan and use it as a guide in collectively pursuing initiatives related to teaching, research, and service as well as in advocating for…

  2. Process of adoption communication openness in adoptive families: adopters’ perspective

    Directory of Open Access Journals (Sweden)

    Maria Acciaiuoli Barbosa-Ducharne

    2016-01-01

    Full Text Available Abstract Communication about adoption is a family interaction process which is more than the simple exchange of information. Adoption communication can be characterized in terms of the level of openness of family conversations regarding the child’s past and the degree of the family’s adoption social disclosure. The objective of this study is to explore the process of adoption communication openness in Portuguese adoptive families by identifying the impact of variables related to the adoption process, the adoptive parenting and the adoptee. One hundred twenty five parents of children aged 3 to 15, who were adopted on average 4 years ago, participated in this study. Data was collected during home visits using the Parents Adoption Process Interview. A cluster analysis identified three different groups of families according to the level of adoption communication openness within the family and outside. The findings also showed that the process of the adoption communication openness started when parents decided to adopt, developed in parent-child interaction and was susceptible to change under professional intervention. The relevance of training given to prospective adopters and of professional practice based on scientific evidence is highlighted.

  3. Architecture of a fully integrated communication infrastructure for the smart home; Architektur einer vollintegrierten Kommunikationsinfrastruktur fuer das Smart Home

    Energy Technology Data Exchange (ETDEWEB)

    Schaefer, Falk-Moritz; Kays, Ruediger [TU Dortmund (Germany). Lehrstuhl fuer Kommunikationstechnik

    2012-07-01

    For some time, applications in the areas of home automation, ambient assisted living and e-health are discussed. These require reliable and energy-efficient communication solutions in the home environment. In addition, new concepts that go hand in hand with the concept of the smart grids need an access to devices within the home environment. In the realization of smart homes the diversity of market participants involved, the parallel existing business models, the application requirements and the available communication systems make special demands on the underlying network infrastructure. Different solutions should be able to communicate with each other and compatible. In addition, the user expects a simple operation and configuration as well as a long-term support of the products. In the best case, the user is confronted with a single, integrated network infrastructure. Instead of separate systems for reading out of smart meters for monitoring the solar system, for health monitoring and the settings of multimedia devices, the telephone system, or computer network, a fully integrated smart home communications infrastructure should come into operation. This smart home infrastructure should be free of unnecessary duplication of structures; all equipment should be taken into account with a communication interface. The authors of the contribution under consideration report on a possible architecture of such a network infrastructure. Different grades are identified. A protocol stack for different technologies and the linking of different network hierarchies are described.

  4. Communication processes, public administration and performance evaluation

    Directory of Open Access Journals (Sweden)

    Arta Musaraj

    2011-01-01

    Full Text Available The integration of legal systems in European is one of the most important issues. This process has started by the fact that there are significant differences between the civil law and common law system and between the legal families in it. A law (at domestic or international level should not be viewed against the backdrop of the historical, political, cultural, social and economic context in which they function. In order to shed further light for our readers, we analyze by emphasizing the significant differences between the civil law and common law system on one side and the legal families that are part of the same legal system, either “Civil” or “Common,” on the other side. The Europeanization of law refers to the communization of the law by EU institutions and to a process that aims at creating a common Europe legal system. In the end, either in medium or long term, the Europeanization is contributing to the so-called non-mandatory or soft harmonization of private law. It is in the best interest of the EU to seek adequate judicial instruments to accommodate the massive numbers of laws deriving from different Civil Law and the Common law systems.

  5. A Biologically-Inspired Neural Network Architecture for Image Processing

    Science.gov (United States)

    1990-12-01

    findings, in accord with other research cited here, were obtained from cortical measurements or, 15 adult cats and 12 kittens , all anesthetized (9...software models on a Cray computer. Furthermore, care should be taken to avoid exceeding machine memory capacity when running intensive processes

  6. Techniques and software architectures for medical visualisation and image processing

    NARCIS (Netherlands)

    Botha, C.P.

    2005-01-01

    This thesis presents a flexible software platform for medical visualisation and image processing, a technique for the segmentation of the shoulder skeleton from CT data and three techniques that make contributions to the field of direct volume rendering. Our primary goal was to investigate the use

  7. A Reasoning Architecture for Expert Troubleshooting of Complex Processes

    Science.gov (United States)

    2012-09-01

    Vachtsevanos5 1, 2, 5 Department of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, 30332,USA naveed @gatech.edu...appropriate models and measurements (data) to perform accurately and expeditiously expert troubleshooting for complex military and industrial processes...military and industrial systems (machines, aircraft, etc.) experience fault/failure modes that must be diagnosed accurately and rapidly in order to

  8. Strategic investment of embodied energy during the architectural planning process

    NARCIS (Netherlands)

    Hildebrand, L.

    2014-01-01

    It is an interesting time in the building industry; for more than one decade sustainability is a planning parameter that essentially impacts construction related processes. Reduction of operational energy was initiated after the oil crisis and changed the type of construction by including heat trans

  9. All-solution-processed organic solar cells with conventional architecture

    NARCIS (Netherlands)

    Franeker, J.J. van; Voorthuijzen, W.P.; Gorter, H.; Hendriks, K.H.; Janssen, R.A.J.; Hadipour, A.; Andriessen, H.A.J.M.; Galagan, Y.O.

    2013-01-01

    Abstract All-solution processed organic solar cells with a conventional device structure were demonstrated. The evaporated low work function LiF/Al electrode was replaced by a printed high work function silver electrode combined with an additional electron transport layer (ETL). Two electron transpo

  10. Mapping one year's design processes at an architecture firm specialized in sustainable architecture- How do sustainability certification systems affect design processes?

    DEFF Research Database (Denmark)

    Landgren, M.; Jensen, Lotte Bjerregaard; Heller, Alfred;

    2016-01-01

    The current study mapped how a Danish architecture firm integrated sustainability in their projects over a year. All the projects concerned were aimed at being sustainable within the framework of the DGNB certification system. The focus of DGNB is equally divided between environmental, economic...... and social aspects. During the mapping process, a picture was drawn of the state of the art for integrating DGNB in design processes and of the challenges involved. Case studies formed the basis of the study and helped substantiate the complexity of integrating DGNB’s criteria as design parameters...

  11. UAS in the NAS Project: Large-Scale Communication Architecture Simulations with NASA GRC Gen5 Radio Model

    Science.gov (United States)

    Kubat, Gregory

    2016-01-01

    This report provides a description and performance characterization of the large-scale, Relay architecture, UAS communications simulation capability developed for the NASA GRC, UAS in the NAS Project. The system uses a validated model of the GRC Gen5 CNPC, Flight-Test Radio model. Contained in the report is a description of the simulation system and its model components, recent changes made to the system to improve performance, descriptions and objectives of sample simulations used for test and verification, and a sampling and observations of results and performance data.

  12. System Maturity and Architecture Assessment Methods, Processes, and Tools

    Science.gov (United States)

    2012-03-02

    1 For a detailed description of the SRL methodology see Sauser, B., J.E. Ramirez- Marquez , D. Nowicki, A...and Ramirez- Marquez 2009; Magnaye, Sauser et al. 2010). Although there are guidelines and tools to support the assessment process (Nolte, Kennedy...employ these metrics (Tan, Sauser et al. 2011). Graettinger, et al. (Graettinger, Garcia et al. 2002) reports that approaches for readiness level

  13. Innovation in teaching and learning methods: Integrating sustainability subjects in the architectural design process

    Directory of Open Access Journals (Sweden)

    Carolina Sepúlveda M.

    2016-01-01

    Full Text Available Architectural training has always been linked to two opposed and complementary processes: creative thinking and linear/technical thinking. Nowadays, the training process of an architect is usually based on an experimental design studio, which is complemented by the formal teaching of theoretical and technical subjects. This system is based on the idea that it will produce a comprehensive professional who is capable of achieving creative, appropriate and viable solutions. However, this teaching method can carry hidden difficulties that may hinder the development of architecture students to their full potential. This article will inform on the methodology and results of applying an innovative method of teaching and learning architecture. This method aims at maximising the capacity of students to integrate their creative and technical competencies in order to increase the quality of work of future architects.

  14. Free-form architectural envelopes: Digital processes opportunities of industrial production at a reasonable price

    Directory of Open Access Journals (Sweden)

    E. Castaneda

    2015-06-01

    Full Text Available Free-form architecture is one of the major challenges for architects, engineers, and the building industry. This is due to the inherent difficulty of manufacturing double curvature facades at reasonable prices and quality. This paper discusses the possibilities of manufacturing free-form facade panels for architectural envelopes supported by recent advances in CAD/CAM systems and digital processes. These methods allow for no-mould processes, thus reducing the final price. Examples of actual constructions will be presented to prove the viability of computer numerically controlled (CNC fabrication technologies. Scientific literature will be reviewed. Promising fabrication methods (additive, subtractive, forming to accomplish this proposal will be discussed. This research will provide valuable information regarding the feasibility of manufacturing free-form panels for architectural envelopes at lower prices.  

  15. Applications of Time-Reversal Processing for Planetary Surface Communications

    Science.gov (United States)

    Barton, Richard J.

    2007-01-01

    Due to the power constraints imposed on wireless sensor and communication networks deployed on a planetary surface during exploration, energy efficient transfer of data becomes a critical issue. In situations where groups of nodes within a network are located in relatively close proximity, cooperative communication techniques can be utilized to improve the range, data rate, power efficiency, and lifetime of the network. In particular, if the point-to-point communication channels on the network are well modeled as frequency non-selective, distributed or cooperative beamforming can employed. For frequency-selective channels, beamforming itself is not generally appropriate, but a natural generalization of it, time-reversal communication (TRC), can still be effective. Time-reversal processing has been proposed and studied previously for other applications, including acoustical imaging, electromagnetic imaging, underwater acoustic communication, and wireless communication channels. In this paper, we study both the theoretical advantages and the experimental performance of cooperative TRC for wireless communication on planetary surfaces. We give a brief introduction to TRC and present several scenarios where TRC could be profitably employed during planetary exploration. We also present simulation results illustrating the performance of cooperative TRC employed in a complex multipath environment and discuss the optimality of cooperative TRC for data aggregation in wireless sensor networks

  16. Alternative packet switch architectures for a 30/20 GHz FDMA/TDMA geostationary communication satellite network

    Science.gov (United States)

    Stehle, Roy; Ogier, Richard G.

    1995-01-01

    This study has investigated alternatives for realizing a packet-based network switch for deployment on a communication satellite. The emphasis was on the avoidance of contention problems that can occur due to the simultaneous arrival of an excessive number of packets destined for the same downlink dwell. The study was to look ahead, beyond the current Advanced Communications Technology Satellite (ACTS) capability, to the next generation of satellites. The study has not been limited by currently available technology, but has used university and commercial research efforts as a basis for designs that can be readily constructed and launched within the next five years. Tradeoffs in memory requirement, power requirement, and architecture have been considered as a part of our study.

  17. 3GPP SA2 architecture and functions for 5G mobile communication system

    OpenAIRE

    Junseok Kim; Dongmyoung Kim; Sunghyun Choi

    2017-01-01

    The on-going development of Fifth Generation (5G) mobile communication technology will be the cornerstone for applying Information and Communication Technology (ICT) to various fields, e.g., smart city, smart home, connected car, etc. The 3rd Generation Partnership Project (3GPP), which has developed the most successful standard technologies in the mobile communication market such as Universal Mobile Telecommunication System (UMTS) and Long Term Evolution (LTE), is currently carrying out the ...

  18. Communication theory and signal processing for transform coding

    CERN Document Server

    El-Shennawy, Khamies Mohammed Ali

    2014-01-01

    This book is tailored to fulfil the requirements in the area of the signal processing in communication systems. The book contains numerous examples, solved problems and exercises to explain the methodology of Fourier Series, Fourier Analysis, Fourier Transform and properties, Fast Fourier Transform FFT, Discrete Fourier Transform DFT and properties, Discrete Cosine Transform DCT, Discrete Wavelet Transform DWT and Contourlet Transform CT. The book is characterized by three directions, the communication theory and signal processing point of view, the mathematical point of view and utility compu

  19. Processes models, environmental analyses, and cognitive architectures: quo vadis quantum probability theory?

    Science.gov (United States)

    Marewski, Julian N; Hoffrage, Ulrich

    2013-06-01

    A lot of research in cognition and decision making suffers from a lack of formalism. The quantum probability program could help to improve this situation, but we wonder whether it would provide even more added value if its presumed focus on outcome models were complemented by process models that are, ideally, informed by ecological analyses and integrated into cognitive architectures.

  20. The ToolBus: A Service-oriented Architecture for Language processing Tools

    NARCIS (Netherlands)

    Klint, P.

    2007-01-01

    The paradigm of service orientation creates new opportunities for language-processing tools and Interactive Development Environments. At CWI we have developed the ToolBus, a service-oriented architecture with application areas like software renovation and implementation of domain- specific languages

  1. A Design of Pipelined Architecture for on-the-Fly Processing of Big Data Streams

    Directory of Open Access Journals (Sweden)

    Usamah Algemili

    2015-01-01

    Full Text Available Conventional processing infrastructures have been challenged by huge demand of stream-based applications. The industry responded by introducing traditional stream processing engines along-with emerged technologies. The ongoing paradigm embraces parallel computing as the most-suitable proposition. Pipelining and Parallelism have been intensively studied in recent years, yet parallel programming on multiprocessor architectures stands as one of the biggest challenges to the software industry. Parallel computing relies on parallel programs that may encounter internal memory constrains. In addition, parallel computing needs special skillset of programming as well as software conversions. This paper presents reconfigurable pipelined architecture. The design is especially aimed at Big Data clustering, and it adopts Symmetric multiprocessing (SMP along with crossbar switch and forced interrupt. The main goal of this promising architecture is to efficiently process big data streams on-the-fly, while it can process sequential programs on parallel-pipelined model. The system overpasses internal memory constrains of multicore architectures by applying forced interrupts and crossbar switching. It reduces complexity, data dependency, high-latency, and cost overhead of parallel computing.

  2. An Executable Architecture Tool for the Modeling and Simulation of Operational Process Models

    Science.gov (United States)

    2015-03-16

    national coordination and iterative development. This paper includes a literature review, background information on process models and architecture...future work involves coordination with Subject Matter Experts ( SMEs ), and extracting data from experiments to assign more appropriate values. 3) Sub...development. This paper provided a brief description of other available tools, Fig. 10. Snapshot of Simulation Output Results for Example 3 background

  3. Data and computer communications

    Energy Technology Data Exchange (ETDEWEB)

    Stallings, W.

    1985-01-01

    The book clarifies and differentiates concepts underlying the field of data and computer communications. It is divided into three parts: 1. Data Communications which is concerned with the exchange of data between two directly connected devices. Within this environment, aspects of transmission, interfacing, link control, and multiplexing are examined. 2. Data Communication Networking - this part examines the internal mechanisms by which communication networks provide a data transfer service for attached devices. 3. Communications Architecture - this part explores the architectural principles and the specific mechanisms required for the exchange of data among computers, terminals and other data processing devices.

  4. 77 FR 52759 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and...

    Science.gov (United States)

    2012-08-30

    ... COMMISSION Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and... importation of certain wireless communication devices, portable music and data processing devices, computers... to a data communications system.'' The Commission has determined to affirm the ID's finding...

  5. 77 FR 51571 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers...

    Science.gov (United States)

    2012-08-24

    ... COMMISSION Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers, and... communication devices, portable music and data processing devices, computers, and components thereof. The.... International Trade Commission has received a complaint entitled Wireless Communication Devices, Portable...

  6. 78 FR 12785 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and...

    Science.gov (United States)

    2013-02-25

    ... COMMISSION Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and... communication devices, portable music and data processing devices, computers and components thereof by reason of... evidence demonstrates that the existence of portable communication devices using ``touch sensitive...

  7. IoT – Internet of Things Architecture for Context Aware Sensors Data Processing in Waste Management Solution

    Directory of Open Access Journals (Sweden)

    Cristian Toma

    2014-12-01

    Full Text Available Internet of Things (IoT refers interconnectivity of different devices and its increasing reasons aim Cloud Computing Services development, interconnectivity among personal smart devices and other devices, and significant development of the applications operate with this kind of connections and data provided by such connections. The biggest role is played by the devices with measuring capabilities helping the understanding of the world around by humans analyzing data generated in new points by these instruments. Data are securely stored and processes to be a viable source for real-time decisions. The paper provides an overview of this new data acquisitions paradigm together with short presentations of the communication protocols can be implemented in IoT infrastructure. Also, a possible solution architecture is provided for waste management.

  8. Evaluating communication architectures in operational information services1 (Version 1.1)

    NARCIS (Netherlands)

    Jongh, J.de

    2005-01-01

    In military operations, many units are mobile and equipped with relatively limited (wireless) communication means in terms of bandwidth and transmission range. Moreover, communications are potentially subject to interference, jamming, and unavailability (e.g., because of radio silence). In this pape

  9. Communication as group process media of aircrew performance

    Science.gov (United States)

    Kanki, B. G.; Foushee, H. C.

    1989-01-01

    This study of group process was motivated by a high-fidelity flight simulator project in which aircrew performance was found to be better when the crew had recently flown together. Considering recent operating experience as a group-level input factor, aspects of the communication process between crewmembers (Captain and First Officer), were explored as a possible mediator to performance. Communication patterns were defined by a speech act typology adapted for the flightdeck setting and distinguished crews that had previously flown together (FT) from those that had not flown together (NFT). A more open communication channel with respect to information exchange and validation and greater First Officer participation in task-related topics was shown by FT crews while NFT crews engaged in more non-task discourse, a speech mode less structured by roles and probably serving a more interpersonal function. Relationships between the speech categories themselves, representing linguistic, and role-related interdependencies provide guidelines for interpreting the primary findings.

  10. Communication as group process media of aircrew performance

    Science.gov (United States)

    Kanki, B. G.; Foushee, H. C.

    1989-01-01

    This study of group process was motivated by a high-fidelity flight simulator project in which aircrew performance was found to be better when the crew had recently flown together. Considering recent operating experience as a group-level input factor, aspects of the communication process between crewmembers (Captain and First Officer), were explored as a possible mediator to performance. Communication patterns were defined by a speech act typology adapted for the flightdeck setting and distinguished crews that had previously flown together (FT) from those that had not flown together (NFT). A more open communication channel with respect to information exchange and validation and greater First Officer participation in task-related topics was shown by FT crews while NFT crews engaged in more non-task discourse, a speech mode less structured by roles and probably serving a more interpersonal function. Relationships between the speech categories themselves, representing linguistic, and role-related interdependencies provide guidelines for interpreting the primary findings.

  11. A Secure and Efficient Communications Architecture for Global Information Grid Users Via Cooperating Space Assets

    Science.gov (United States)

    2008-06-19

    selected from the literature . Each of these proposed architectures improves system scalability and security in different ways. 2.4.3.1 GOTHIC The... Literature Review............................................................................................................8 2.1 Chapter Overview...5 Figure 2 - Global Information Grid Layers [SMC06a]..................................................... 12 Figure 3 - The Gothic

  12. VLSI architecture of a K-best detector for MIMO-OFDM wireless communication systems

    Energy Technology Data Exchange (ETDEWEB)

    Jian Haifang; Shi Yin, E-mail: jhf@semi.ac.c [Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083 (China)

    2009-07-15

    The K-best detector is considered as a promising technique in the MIMO-OFDM detection because of its good performance and low complexity. In this paper, a new K-best VLSI architecture is presented. In the proposed architecture, the metric computation units (MCUs) expand each surviving path only to its partial branches, based on the novel expansion scheme, which can predetermine the branches' ascending order by their local distances. Then a distributed sorter sorts out the new K surviving paths from the expanded branches in pipelines. Compared to the conventional K-best scheme, the proposed architecture can approximately reduce fundamental operations by 50% and 75% for the 16-QAM and the 64-QAM cases, respectively, and, consequently, lower the demand on the hardware resource significantly. Simulation results prove that the proposed architecture can achieve a performance very similar to conventional K-best detectors. Hence, it is an efficient solution to the K-best detector's VLSI implementation for high-throughput MIMO-OFDM systems.

  13. Cellular Automata as a learning process in Architecture and Urban design

    DEFF Research Database (Denmark)

    Jensen, Mads Brath; Foged, Isak Worre

    2014-01-01

    design approach on a master level urban design studio this paper will discuss the strategies for dealing with complexity at an urban scale as well as the pedagogical considerations behind applying computational tools and methods to a urban design education.......This paper explores the application of cellular automata as method for investigating the dynamic parameters and interrelationships that constitute the urban space. With increasing aspects needed for integration during the architectural and urban design process with the relations between....... An architectural methodological response to this situation is presented through the development of a conceptual computational design system that allows these dynamics to unfold and to be observed for architectural design decision taking. Reflecting on the development and implementation of a cellular automata based...

  14. A software architecture for multi-cellular system simulations on graphics processing units.

    Science.gov (United States)

    Jeannin-Girardon, Anne; Ballet, Pascal; Rodin, Vincent

    2013-09-01

    The first aim of simulation in virtual environment is to help biologists to have a better understanding of the simulated system. The cost of such simulation is significantly reduced compared to that of in vivo simulation. However, the inherent complexity of biological system makes it hard to simulate these systems on non-parallel architectures: models might be made of sub-models and take several scales into account; the number of simulated entities may be quite large. Today, graphics cards are used for general purpose computing which has been made easier thanks to frameworks like CUDA or OpenCL. Parallelization of models may however not be easy: parallel computer programing skills are often required; several hardware architectures may be used to execute models. In this paper, we present the software architecture we built in order to implement various models able to simulate multi-cellular system. This architecture is modular and it implements data structures adapted for graphics processing units architectures. It allows efficient simulation of biological mechanisms.

  15. Science-driven system architecture: A new process for leadership class computing

    Energy Technology Data Exchange (ETDEWEB)

    Simon, Horst; Kramer, William; Saphir, William; Shalf, John; Bailey, David; Oliker, Leonid; Banda, Michael; McCurdy, C. William; Hules, John; Canning, Andrew; Day, Marc; Colella, Philip; Serafini, David; Wehner, Michael; Nugent, Peter

    2004-10-19

    Over the past several years, computational scientists have observed a frustrating trend of stagnating application performance despite dramatic increases in peak performance of high performance computers. In 2002, researchers at Lawrence Berkeley National Laboratory, Argonne National Laboratory, and IBM proposed a new process to reverse this situation [1]. This strategy is based on new types of development partnerships with computer vendors based on the concept of science-driven computer system design. This strategy will engage applications scientists well before an architecture is available for commercialization. The process is already producing results, and has further potential for dramatically improving system efficiency. This paper documents the progress to date and the potential for future benefits. An example of this process is discussed, using IBM Power architecture with a computer architecture design that can lead to a sustained performance of 50 to 100 Tflo p/s on a broad spectrum of applications in 2006 for a reasonable cost. This partnership will establish a collaborative approach to modifying computer architecture to enable heretofore unrealized achievements in computer capability-limited fields such as nanoscience, combustion modeling, fusion, climate modeling, and astrophysics.

  16. [Building Process and Architectural Planning Characteristics of Daehan Hospital Main Building].

    Science.gov (United States)

    Lee, Geauchul

    2016-04-01

    This paper explores the introduction process of Daehan Hospital from Japan as the modern medical facility in Korea, and the architectural planning characteristics as a medical facility through the detailed building process of Daehan Hospital main building. The most noticeable characteristic of Daehan Hospital is that it was designed and constructed not by Korean engineers but by Japanese engineers. Therefore, Daehan Hospital was influenced by Japanese early modern medical facility, and Japanese engineers modeled Daehan Hospital main building on Tokyo Medical School main building which was constructed in 1876 as the first national medical school and hospital. The architectural type of Tokyo Medical School main building was a typical school architecture in early Japanese modern period which had a middle corridor and a pseudo Western-style tower, but Tokyo Medical School main building became the model of a medical facility as the symbol of the medical department in Tokyo Imperial University. This was the introduction and transplantation process of Japanese modern 'model' like as other modern systems and technologies during the Korean modern transition period. However, unlike Tokyo Medical School main building, Daehan Hospital main building was constructed not as a wooden building but as a masonry building. Comparing with the function of Daehan Hospital main building, its architectural form and construction costs was excessive scale, which was because Japanese Resident-General of Korea had the intention of ostentation that Japanese modernity was superior to Korean Empire.

  17. A third generation object-oriented process model:roles and architectures in focus

    OpenAIRE

    Kivistö, K. (Kari)

    2000-01-01

    Abstract This thesis examines and evaluates the Object-Oriented Client/Server (OOCS) model, a process model that can be used when IT organizations develop object-oriented client/server applications. In particular, it defines the roles in the development team and combines them into the process model. Furthermore, the model focuses on the client/server architecture, considering it explicitly. The model has been under construction for several years and it has been test...

  18. Une architecture de communication pour environnements virtuels distribués à grande échelle basée sur les canaux multipoint

    OpenAIRE

    Barza, Laurentiu

    2004-01-01

    The subject of this thesis is situated at the confluence of the virtual environments (VE) and the IP networking. It is about the possible existence over the Internet, in the near future, of heterogeneous, large-scale, distributed virtual environments, inhabited by millions of entities. The thesis presents the development, the implementation and the experimentation of a communication architecture for a large-scale VE application. The goal of this architecture is to allow a large number of part...

  19. Développement d'une architecture de communication sans fil pour les réseaux des capteurs dans le domaine aérospatial

    OpenAIRE

    2011-01-01

    The context of this thesis is the development of wireless sensor networks for aerospace applications. The concerned aerospace applications are the temperature and mechanical stress measurement, on the aircraft wings for flight test and on the satellite structures. Note that these measurements must be made in real time without data loss. Our researches are focused on developing wireless communication architecture. This architecture should meet the specific needs of these applications in term o...

  20. Interpersonal Communication in the Process of Value Formation

    Directory of Open Access Journals (Sweden)

    Jozek Milan

    2014-12-01

    Full Text Available Issues of communication, isolation, and education are part of our everyday lives, whether private or professional. The behaviour of the young generation at school and at home has different forms. It demonstrates their actions, way of thinking and feeling. Furthermore, their behaviour expresses their future tendencies. These forms of behaviour are strongly influenced by a lack of communication. As a result, the educational process is made harder, sometimes even impossible. Many experts in ethics, pedagogy and psychology have been paying attention to this issue and have started to evaluate its impact on the young.

  1. The Role of Visual Communication in the Process of Institutionalization

    DEFF Research Database (Denmark)

    Meyer, Renate; Jancsary, Dennis; Boxenbaum, Eva

    How does visual communication contribute to the emergence and consolidation of new institutions? Previous research on institutionalization has primarily focused on verbal text and neglected its interaction with visual forms of communication. We propose that a more thorough and systematic engagement...... with the ways in which the visual interacts with the verbal may help address existing ‘fault lines’ and ‘blind spots’ in our knowledge about processes of institutionalization. In order to theorize such contribution of a visual perspective, we utilize insights from social semiotics and flesh out a number...

  2. Being private and public at home : an architectural perspective on video mediated communication in smart homes

    OpenAIRE

    Junestrand, Stefan

    2004-01-01

    Video mediated communication (VMC) is a two way real time audio and video communication between remote places. VMC has the potential to be applied favourably to many activities, services and functions in smart homes. The concept of smart homes refers to homes equipped with technological systems and appliances enabling centralised or remotely controllable integrated functionalities and services. The main question for the current research work is formulated accordingly: How can spaces for video...

  3. A highly reliable, autonomous data communication subsystem for an advanced information processing system

    Science.gov (United States)

    Nagle, Gail; Masotto, Thomas; Alger, Linda

    1990-01-01

    The need to meet the stringent performance and reliability requirements of advanced avionics systems has frequently led to implementations which are tailored to a specific application and are therefore difficult to modify or extend. Furthermore, many integrated flight critical systems are input/output intensive. By using a design methodology which customizes the input/output mechanism for each new application, the cost of implementing new systems becomes prohibitively expensive. One solution to this dilemma is to design computer systems and input/output subsystems which are general purpose, but which can be easily configured to support the needs of a specific application. The Advanced Information Processing System (AIPS), currently under development has these characteristics. The design and implementation of the prototype I/O communication system for AIPS is described. AIPS addresses reliability issues related to data communications by the use of reconfigurable I/O networks. When a fault or damage event occurs, communication is restored to functioning parts of the network and the failed or damage components are isolated. Performance issues are addressed by using a parallelized computer architecture which decouples Input/Output (I/O) redundancy management and I/O processing from the computational stream of an application. The autonomous nature of the system derives from the highly automated and independent manner in which I/O transactions are conducted for the application as well as from the fact that the hardware redundancy management is entirely transparent to the application.

  4. A Multi-Objective Compounded Local Mobile Cloud Architecture Using Priority Queues to Process Multiple Jobs

    Science.gov (United States)

    Wei, Xiaohui; Sun, Bingyi; Cui, Jiaxu; Xu, Gaochao

    2016-01-01

    As a result of the greatly increased use of mobile devices, the disadvantages of portable devices have gradually begun to emerge. To solve these problems, the use of mobile cloud computing assisted by cloud data centers has been proposed. However, cloud data centers are always very far from the mobile requesters. In this paper, we propose an improved multi-objective local mobile cloud model: Compounded Local Mobile Cloud Architecture with Dynamic Priority Queues (LMCpri). This new architecture could briefly store jobs that arrive simultaneously at the cloudlet in different priority positions according to the result of auction processing, and then execute partitioning tasks on capable helpers. In the Scheduling Module, NSGA-II is employed as the scheduling algorithm to shorten processing time and decrease requester cost relative to PSO and sequential scheduling. The simulation results show that the number of iteration times that is defined to 30 is the best choice of the system. In addition, comparing with LMCque, LMCpri is able to effectively accommodate a requester who would like his job to be executed in advance and shorten execution time. Finally, we make a comparing experiment between LMCpri and cloud assisting architecture, and the results reveal that LMCpri presents a better performance advantage than cloud assisting architecture. PMID:27419854

  5. A Multi-Objective Compounded Local Mobile Cloud Architecture Using Priority Queues to Process Multiple Jobs.

    Directory of Open Access Journals (Sweden)

    Xiaohui Wei

    Full Text Available As a result of the greatly increased use of mobile devices, the disadvantages of portable devices have gradually begun to emerge. To solve these problems, the use of mobile cloud computing assisted by cloud data centers has been proposed. However, cloud data centers are always very far from the mobile requesters. In this paper, we propose an improved multi-objective local mobile cloud model: Compounded Local Mobile Cloud Architecture with Dynamic Priority Queues (LMCpri. This new architecture could briefly store jobs that arrive simultaneously at the cloudlet in different priority positions according to the result of auction processing, and then execute partitioning tasks on capable helpers. In the Scheduling Module, NSGA-II is employed as the scheduling algorithm to shorten processing time and decrease requester cost relative to PSO and sequential scheduling. The simulation results show that the number of iteration times that is defined to 30 is the best choice of the system. In addition, comparing with LMCque, LMCpri is able to effectively accommodate a requester who would like his job to be executed in advance and shorten execution time. Finally, we make a comparing experiment between LMCpri and cloud assisting architecture, and the results reveal that LMCpri presents a better performance advantage than cloud assisting architecture.

  6. A Multi-Objective Compounded Local Mobile Cloud Architecture Using Priority Queues to Process Multiple Jobs.

    Science.gov (United States)

    Wei, Xiaohui; Sun, Bingyi; Cui, Jiaxu; Xu, Gaochao

    2016-01-01

    As a result of the greatly increased use of mobile devices, the disadvantages of portable devices have gradually begun to emerge. To solve these problems, the use of mobile cloud computing assisted by cloud data centers has been proposed. However, cloud data centers are always very far from the mobile requesters. In this paper, we propose an improved multi-objective local mobile cloud model: Compounded Local Mobile Cloud Architecture with Dynamic Priority Queues (LMCpri). This new architecture could briefly store jobs that arrive simultaneously at the cloudlet in different priority positions according to the result of auction processing, and then execute partitioning tasks on capable helpers. In the Scheduling Module, NSGA-II is employed as the scheduling algorithm to shorten processing time and decrease requester cost relative to PSO and sequential scheduling. The simulation results show that the number of iteration times that is defined to 30 is the best choice of the system. In addition, comparing with LMCque, LMCpri is able to effectively accommodate a requester who would like his job to be executed in advance and shorten execution time. Finally, we make a comparing experiment between LMCpri and cloud assisting architecture, and the results reveal that LMCpri presents a better performance advantage than cloud assisting architecture.

  7. Real-Time Communications for Wireless Sensor Networks: A Two-Tiered Architecture

    OpenAIRE

    2009-01-01

    While many approaches have been proposed to deal with energy/latency trade-offs, they are likely to be insufficient for the applications where reduced delay guarantee is the main concern. In this article, we investigated the potential application of a decentralized two-tiered network architecture, in large-scale wireless sensor networks, where an upper layer Wireless Local Area Network (WLAN), offering more powerful capabilities, serves as a backbone to an adaptively-clustered Low-Energy Adap...

  8. All-IP-Ethernet architecture for real-time sensor-fusion processing

    Science.gov (United States)

    Hiraki, Kei; Inaba, Mary; Tezuka, Hiroshi; Tomari, Hisanobu; Koizumi, Kenichi; Kondo, Shuya

    2016-03-01

    Serendipter is a device that distinguishes and selects very rare particles and cells from huge amount of population. We are currently designing and constructing information processing system for a Serendipter. The information processing system for Serendipter is a kind of sensor-fusion system but with much more difficulties: To fulfill these requirements, we adopt All IP based architecture: All IP-Ethernet based data processing system consists of (1) sensor/detector directly output data as IP-Ethernet packet stream, (2) single Ethernet/TCP/IP streams by a L2 100Gbps Ethernet switch, (3) An FPGA board with 100Gbps Ethernet I/F connected to the switch and a Xeon based server. Circuits in the FPGA include 100Gbps Ethernet MAC, buffers and preprocessing, and real-time Deep learning circuits using multi-layer neural networks. Proposed All-IP architecture solves existing problem to construct large-scale sensor-fusion systems.

  9. A Supply Chain Architecture Based on Multi-agent Systems to Support Decentralized Collaborative Processes

    Science.gov (United States)

    Hernández, Jorge E.; Poler, Raúl; Mula, Josefa

    In a supply chain management context, the enterprise architecture concept to efficiently support the collaborative processes among the supply chain members involved has been evolving. Each supply chain has an organizational structure that describes the hierarchical relationships among its members, ranging from centralized to decentralized organizations. From a decentralized perspective, each supply chain member is able to identify collaborative and non collaborative partners and the kind of information to be exchanged to support negotiation processes. The same concepts of organizational structure and negotiation rules can be applied to a multi-agent system. This paper proposes a novel supply chain architecture to support decentralized collaborative processes in supply chains by considering a multi-agent-based system modeling approach.

  10. [Communicative process in the mobile emergency service (SAMU/192)].

    Science.gov (United States)

    dos Santos, Maria Claudia; Bernardes, Andrea; Gabriel, Carmen Silvia; Evora, Yolanda Dora Martinez; Rocha, Fernanda Ludmilla Rossi

    2012-03-01

    This study aims to characterize the communication process among nursing assistants who work in vehicles of the basic life support of the mobile emergency service, in the coordination of this service, and in the unified medical regulation service in a city of the state of São Paulo, Brazil. This descriptive and qualitative research used the thematic content analysis for data analysis. Semi-structured interviews were used for the data collection, which was held in January, 2010. Results show diffculties in communication with both the medical regulation service and the coordination. Among the most highlighted aspects are failures during the radio transmission, lack of qualified radio operators, difficult access to the coordination and lack of supervision by nurses. However, it was possible to detect solutions that aim to improve the communication ana consequently, the service offered by the mobile emergency service.

  11. Digital signal processing for wireless communication using Matlab

    CERN Document Server

    Gopi, E S

    2016-01-01

    This book examines signal processing techniques used in wireless communication illustrated by using the Matlab program. The author discusses these techniques as they relate to Doppler spread; delay spread; Rayleigh and Rician channel modeling; rake receiver; diversity techniques; MIMO and OFDM -based transmission techniques; and array signal processing. Related topics such as detection theory, link budget, multiple access techniques, and spread spectrum are also covered.   ·         Illustrates signal processing techniques involved in wireless communication using Matlab ·         Discusses multiple access techniques such as Frequency division multiple access, Time division multiple access, and Code division multiple access ·         Covers band pass modulation techniques such as Binary phase shift keying, Differential phase shift keying, Quadrature phase shift keying, Binary frequency shift keying, Minimum shift keying, and Gaussian minimum shift keying.

  12. Space-Time Coding and Signal Processing for MIMO Communications

    Institute of Scientific and Technical Information of China (English)

    Inaki Berenguer; Xiaodong Wang

    2003-01-01

    Rapid growth in mobile computing and other wireless multimedia services is inspiring many research and development activities on high-speed wireless communication systems.Main challenges in this area include the development of efficient coding and modulation signal processing techniques for improving the quality and spectral efficiency of wireless systems. The recently emerged space-time coding and signal processing techniques for wireless communication systems employing multiple transmit and receive antennas offer a powerful paradigm for meeting these challenges. This paper provides an overview on the recent development in space-time coding and signal processing techniques for multiple-input multiple-output (MIMO) communication systems. We first review the information theoretic results on the capacities of wireless systems employing multiple transmit and receive antennas. We then describe two representative categories of space-time systems, namely, the BLAST system and the space-time block coding system, both of which have been proposed for next-generation high-speed wireless system. Signal processing techniques for channel estimation and decoding in space-time systems are also discussed. Finally, some other coding and signal processing techniques for wireless systems employing multiple transmit and receive antennas that are currently under intensive research are also briefly touched upon.

  13. A Pattern Language for Documenting Software Architectures

    NARCIS (Netherlands)

    Avgeriou, Paris; Guelfi, Nicolas; Razavi, Reza

    2004-01-01

    The process of creating the architecture of a software system results in a documentation, which is recognized as a key artifact for stakeholder communication, early analysis of the system, support for quality attributes and trouble-free maintenance. The problem of software architecture documentation

  14. Perceptions of Teachers about School Administrators’ Effectiveness in Communication Process

    Directory of Open Access Journals (Sweden)

    Meltem A. KÖSTERELİOĞLU

    2010-04-01

    Full Text Available The aim of this study is to examine the perceptions of teachers about the effectiveness of school administrators in communication process. The study was designed in the form of a survey study and during the study descriptive method was used. The subjects of this study were 250 teachers who participated in centralized inservice training program organized by Ministry of National Education (MoNE in 2007-2008 academic year. During the study the data were collected by means of the scale developed by Özmen ve Yörük (2007 and the scale has four factors as the administrators’ interest, communication method, integration with environment and focusing on teaching. To analyze the data collected, frequency, percentage, mean values were calculated and t- test and “Kruskal Wallis H tests were used. The findings of the study indicated that teachers’ perceptions about the effectiveness of school administrators in communication process have the highest mean score in the administrators’ interest dimension and communication method, integration with environment and focusing on teaching dimensions follow this dimension. The findings also indicated that teachers perceptions show significant difference in favour of female teachers when genders of teachers are concerned.

  15. A Web Centric Architecture for Deploying Multi-Disciplinary Engineering Design Processes

    Science.gov (United States)

    Woyak, Scott; Kim, Hongman; Mullins, James; Sobieszczanski-Sobieski, Jaroslaw

    2004-01-01

    There are continuous needs for engineering organizations to improve their design process. Current state of the art techniques use computational simulations to predict design performance, and optimize it through advanced design methods. These tools have been used mostly by individual engineers. This paper presents an architecture for achieving results at an organization level beyond individual level. The next set of gains in process improvement will come from improving the effective use of computers and software within a whole organization, not just for an individual. The architecture takes advantage of state of the art capabilities to produce a Web based system to carry engineering design into the future. To illustrate deployment of the architecture, a case study for implementing advanced multidisciplinary design optimization processes such as Bi-Level Integrated System Synthesis is discussed. Another example for rolling-out a design process for Design for Six Sigma is also described. Each example explains how an organization can effectively infuse engineering practice with new design methods and retain the knowledge over time.

  16. Holistic Layer of the Enterprise Architecture on the Basis of Process-Driven Organization

    Directory of Open Access Journals (Sweden)

    Stepan Alexa

    2017-07-01

    Full Text Available Growing complexity of the enterprise ecosystem along with the existence of legacy approaches in the organization can result in a number of challenges when maintaining the solid baseline of its information assets. The digital industry has, over past two decades, passed through rapid evolution triggered both by availability of new technologies, and business as well as operating and funding models. These enablers have direct impact on the way that organizations design and execute their business processes in order to maintain the alignment between their capabilities and targets. This trend implies that enterprises and organizations need to remain flexible by maintaining the alignment of their business and their infrastructure in a dynamically changing and integrated ecosystem. It has been widely recognized that the enterprise architecture as well as the process driven approaches provide tools used by organizations to explain how business, resources and other elements within the organization are related to each other. This article discusses the role, and associated value, that the enterprise architecture and process driven approach have when describing what constitutes the enterprise. At the same time it elaborates on principles and constructs of the model of the holistic layer of the enterprise architecture on the basis of process driven approach. The proposed model aims to combine a unified view on infrastructure and behavior of the enterprise with lean principles in order to identify and focus on key elements of the enterprise.

  17. A New Constellation Configuration Scheme for Communicating Architecture in Cislunar Space

    Directory of Open Access Journals (Sweden)

    Ming Xu

    2013-01-01

    Full Text Available A new constellation configuration is proposed to provide near-constant communications between any two points in the cislunar space. Four satellites were allocated on some natural orbits near points by a multiple shooting corrector numerically. The revisiting intervals between the successive revisits on specified points by the constellation are demonstrated both on the geographical maps of the Earth and the Moon, with a consideration of equatorial inclinations with respect to the Earth-Moon orbital plane. Moreover, the coverage periodicity on the Moon is induced by Metonic cycle of 19 years. Cost analysis on stationkeeping and launching is implemented for this constellation in detail. Finally, some aspects about communications, such as satellite links, delays, ground stations, and communication devices, are surveyed preliminarily.

  18. A Mixed-Mode Signal Processing Architecture for Radix-2 DHT

    Directory of Open Access Journals (Sweden)

    Gautam A. Shah,

    2011-06-01

    Full Text Available This paper proposes a mixed-mode signal processing architecture for radix-2 DHT. In the known algorithms, the stage structures perform all the additions and multiplications. The proposed algorithm introduces multiplying structures which perform all the multiplications with the cosine coefficients and their related additions. This leads to i simplification of the stage structures which now perform only the additions, and ii a reduction in the number of multiplications without affecting the number of additions. A mixed-mode signal processing architecture to implement the algorithm utilizing an N-bit ring counter, sample-and-hold array and analog block structure is proposed. The validity of this design has been tested by simulating it with the help of Orcad PSpice.

  19. Quality Criteria for Architectural 3D Data in Usage and Preservation Processes

    DEFF Research Database (Denmark)

    Lindlar, Michelle; Tamke, Martin; Myrup Jensen, Morten

    2014-01-01

    responsible for the archival of information about publically funded buildings. Architectural practise of today commonly includes 3D object processing. The output of these processes is slowly reaching the aforementioned cultural heritage institutions which are now facing the task of quality assessment...... of the material. The paper will present a first analysis of potential quality factors and compare architectural and cultural heritage domain expectations in 3D data quality. It will look at two forms of 3D data: modelled 3D objects and scanned 3D objects. The work presented in this paper is based on work......Quality assessment of digital material has been just one of the new tasks the digital revolution brought into the library domain. With the first big print material digitization efforts in the digital heritage domain dating back to the 1980ies, plenty of experience has been gathered...

  20. Quality Criteria for Architectural 3D Data in Usage and Preservation Processes

    DEFF Research Database (Denmark)

    Lindlar, Michelle; Tamke, Martin; Myrup Jensen, Morten

    2014-01-01

    responsible for the archival of information about publically funded buildings. Architectural practise of today commonly includes 3D object processing. The output of these processes is slowly reaching the aforementioned cultural heritage institutions which are now facing the task of quality assessment...... of the material. The paper will present a first analysis of potential quality factors and compare architectural and cultural heritage domain expectations in 3D data quality. It will look at two forms of 3D data: modelled 3D objects and scanned 3D objects. The work presented in this paper is based on work......Quality assessment of digital material has been just one of the new tasks the digital revolution brought into the library domain. With the first big print material digitization efforts in the digital heritage domain dating back to the 1980ies, plenty of experience has been gathered...

  1. A Qualitative Method for Assessing the Impact of ICT on the Architectural Design Process

    OpenAIRE

    Ganah, Abdulkadir; Kamara, John

    2013-01-01

    During the last thirty years or so, we have witnessed tremendous developments in information and communication technology (ICT). Computer processing power doubles each 18 months, as Gordon Moore predicted during the mid-1960s. The computer and communications world has been revolutionised by the invention of the Internet. It has changed the way of exchanging, viewing, sharing, manipulating and storing the information. Other technologies such as smartphones, wearable computers, tablets, wireles...

  2. Logic of historical development of the formation process of architectural and construction solutions

    OpenAIRE

    Baranov Valeriy Aleksandrovich

    2014-01-01

    In research field of development processes of architectural and construction decisions (ACD) there is already very considerable scientific, normative and technical material. And still in the end of the research boom in this area (the 90th) many authors stated their weak return in practical design. High methodological potential gives understanding of the act of ACD formation as a special kind of activity, and its structure - as historical phenomenon that allows to put two main methodological p...

  3. New multi-DSP parallel computing architecture for real-time image processing

    Institute of Scientific and Technical Information of China (English)

    Hu Junhong; Zhang Tianxu; Jiang Haoyang

    2006-01-01

    The flexibility of traditional image processing system is limited because those system are designed for specific applications. In this paper, a new TMS320C64x-based multi-DSP parallel computing architecture is presented. It has many promising characteristics such as powerful computing capability, broad I/O bandwidth, topology flexibility, and expansibility. The parallel system performance is evaluated by practical experiment.

  4. Architectural and performance considerations for a 10(7)-instruction/sec optoelectronic central processing unit.

    Science.gov (United States)

    Arrathoon, R; Kozaitis, S

    1987-11-01

    Architectural considerations for a multiple-instruction, single-data-based optoelectronic central processing unit operating at 10(7) instructions per second are detailed. Central to the operation of this device is a giant fiber-optic content-addressable memory in a programmable logic array configuration. The design includes four instructions and emphasizes the fan-in and fan-out capabilities of optical systems. Interconnection limitations and scaling issues are examined.

  5. Performance analysis of massively parallel embedded hardware architectures for retinal image processing

    OpenAIRE

    Osorio Roberto; Nieto Alejandro; Brea Victor; Vilariño David

    2011-01-01

    Abstract This paper examines the implementation of a retinal vessel tree extraction technique on different hardware platforms and architectures. Retinal vessel tree extraction is a representative application of those found in the domain of medical image processing. The low signal-to-noise ratio of the images leads to a large amount of low-level tasks in order to meet the accuracy requirements. In some applications, this might compromise computing speed. This paper is focused on the assessment...

  6. iBiology: communicating the process of science

    OpenAIRE

    Goodwin, Sarah S.

    2014-01-01

    The Internet hosts an abundance of science video resources aimed at communicating scientific knowledge, including webinars, massive open online courses, and TED talks. Although these videos are efficient at disseminating information for diverse types of users, they often do not demonstrate the process of doing science, the excitement of scientific discovery, or how new scientific knowledge is developed. iBiology (www.ibiology.org), a project that creates open-access science videos about biolo...

  7. A Real-time Image Processing with a Compact FPGA-based Architecture

    Directory of Open Access Journals (Sweden)

    Ridha Djemal

    2005-01-01

    Full Text Available This study have presented a filed programmable gate array implementation of a real time video smoothing algorithm. In comparison with smoothing video techniques like deblocking filters in H.264 or smoothing in JPEG2000, the proposed method is implemented in hardware and its computational cost and complexity are reduced where all pixel processing related to uncompressed video is done on the fly. Our proposed architecture tries to optimize the design of a modified version of the Nagao filter in order to make video smoothing with respect to real time constraints. This filter have to smooth video before applying an edge extraction approach for manufacturing process control. The proposed architecture based on the RC1000P-P Virtex prototyping Board is analyzed to gain an understanding of the relationships between algorithmic features and implementation cost. Experimental results indicate that using this prototyping board with optimized hardware architecture; we can deliver real-time performances and an improvement in the video quality. This filter is capable to process a real time video with a high resolution and deliver 30 images per second at 10 MHz clock cycle.

  8. Dynamic systems and inferential information processing in human communication.

    Science.gov (United States)

    Grammer, Karl; Fink, Bernhard; Renninger, LeeAnn

    2002-12-01

    Research in human communication on an ethological basis is almost obsolete. The reasons for this are manifold and lie partially in methodological problems connected to the observation and description of behavior, as well as the nature of human behavior itself. In this chapter, we present a new, non-intrusive, technical approach to the analysis of human non-verbal behavior, which could help to solve the problem of categorization that plagues the traditional approaches. We utilize evolutionary theory to propose a new theory-driven methodological approach to the 'multi-unit multi-channel modulation' problem of human nonverbal communication. Within this concept, communication is seen as context-dependent (the meaning of a signal is adapted to the situation), as a multi-channel and a multi-unit process (a string of many events interrelated in 'communicative' space and time), and as related to the function it serves. Such an approach can be utilized to successfully bridge the gap between evolutionary psychological research, which focuses on social cognition adaptations, and human ethology, which describes every day behavior in an objective, systematic way.

  9. Joint digital signal processing for superchannel coherent optical communication systems.

    Science.gov (United States)

    Liu, Cheng; Pan, Jie; Detwiler, Thomas; Stark, Andrew; Hsueh, Yu-Ting; Chang, Gee-Kung; Ralph, Stephen E

    2013-04-01

    Ultra-high-speed optical communication systems which can support ≥ 1Tb/s per channel transmission will soon be required to meet the increasing capacity demand. However, 1Tb/s over a single carrier requires either or both a high-level modulation format (i.e. 1024QAM) and a high baud rate. Alternatively, grouping a number of tightly spaced "sub-carriers" to form a terabit superchannel increases channel capacity while minimizing the need for high-level modulation formats and high baud rate, which may allow existing formats, baud rate and components to be exploited. In ideal Nyquist-WDM superchannel systems, optical subcarriers with rectangular spectra are tightly packed at a channel spacing equal to the baud rate, thus achieving the Nyquist bandwidth limit. However, in practical Nyquist-WDM systems, precise electrical or optical control of channel spectra is required to avoid strong inter-channel interference (ICI). Here, we propose and demonstrate a new "super receiver" architecture for practical Nyquist-WDM systems, which jointly detects and demodulates multiple channels simultaneously and mitigates the penalties associated with the limitations of generating ideal Nyquist-WDM spectra. Our receiver-side solution relaxes the filter requirements imposed on the transmitter. Two joint DSP algorithms are developed for linear ICI cancellation and joint carrier-phase recovery. Improved system performance is observed with both experimental and simulation data. Performance analysis under different system configurations is conducted to demonstrate the feasibility and robustness of the proposed joint DSP algorithms.

  10. First International Conference Multimedia Processing, Communication and Computing Applications

    CERN Document Server

    Guru, Devanur

    2013-01-01

    ICMCCA 2012 is the first International Conference on Multimedia Processing, Communication and Computing Applications and the theme of the Conference is chosen as ‘Multimedia Processing and its Applications’. Multimedia processing has been an active research area contributing in many frontiers of today’s science and technology. This book presents peer-reviewed quality papers on multimedia processing, which covers a very broad area of science and technology. The prime objective of the book is to familiarize readers with the latest scientific developments that are taking place in various fields of multimedia processing and is widely used in many disciplines such as Medical Diagnosis, Digital Forensic, Object Recognition, Image and Video Analysis, Robotics, Military, Automotive Industries, Surveillance and Security, Quality Inspection, etc. The book will assist the research community to get the insight of the overlapping works which are being carried out across the globe at many medical hospitals and instit...

  11. Advanced information processing system: The Army fault tolerant architecture conceptual study. Volume 2: Army fault tolerant architecture design and analysis

    Science.gov (United States)

    Harper, R. E.; Alger, L. S.; Babikyan, C. A.; Butler, B. P.; Friend, S. A.; Ganska, R. J.; Lala, J. H.; Masotto, T. K.; Meyer, A. J.; Morton, D. P.

    1992-01-01

    Described here is the Army Fault Tolerant Architecture (AFTA) hardware architecture and components and the operating system. The architectural and operational theory of the AFTA Fault Tolerant Data Bus is discussed. The test and maintenance strategy developed for use in fielded AFTA installations is presented. An approach to be used in reducing the probability of AFTA failure due to common mode faults is described. Analytical models for AFTA performance, reliability, availability, life cycle cost, weight, power, and volume are developed. An approach is presented for using VHSIC Hardware Description Language (VHDL) to describe and design AFTA's developmental hardware. A plan is described for verifying and validating key AFTA concepts during the Dem/Val phase. Analytical models and partial mission requirements are used to generate AFTA configurations for the TF/TA/NOE and Ground Vehicle missions.

  12. Carrier Current Line Systems Technologies in M2M Architecture for Wireless Communication

    Directory of Open Access Journals (Sweden)

    Hua-Ching Chen

    2016-01-01

    Full Text Available This paper investigates the Carrier Current Line Systems (CCLS technologies of Machine to Machine (M2M architecture which applied for mobile station coverage working with metro, high speed railway, and subway such as analysis for public transport of an indoor transition system. It is based on the theory and practical engineering principle which provide guidelines and formulas for link budget design to help designers fully control and analyze the single output power of uplink and downlink between Fiber Repeaters (FR and mobile station as well as base station. Finally, the results of this leakage cable system are successfully applied to indoor coverage design for metro rapid transit system which are easily installed cellular over fiber solutions for WCDMA/LTE access is becoming Ubiquitous Network to Internet of Thing (IOT real case hierarchy of telecommunication.

  13. Architecture Modeling and Performance Characterization of Space Communications and Navigation (SCaN) Network Using MACHETE

    Science.gov (United States)

    Jennings, Esther; Heckman, David

    2008-01-01

    As future space exploration missions will involve larger number of spacecraft and more complex systems, theoretical analysis alone may have limitations on characterizing system performance and interactions among the systems. Simulation tools can be useful for system performance characterization through detailed modeling and simulation of the systems and its environment...This paper reports the simulation of the Orion (Crew Exploration Vehicle) to the International Space Station (ISS) mission where Orion is launched by Ares into orbit on a 14-day mission to rendezvous with the ISS. Communications services for the mission are provided by the Space Communication and Navigation (SCaN) network infrastructure which includes the NASA Space Network (SN), Ground Network (GN) and NASA Integrated Services Network (NISN). The objectives of the simulation are to determine whether SCaN can meet the communications needs of the mission, to demonstrate the benefit of using QoS prioritization, and to evaluate network-key parameters of interest such as delay and throughout.

  14. The Jupyter/IPython architecture: a unified view of computational research, from interactive exploration to communication and publication.

    Science.gov (United States)

    Ragan-Kelley, M.; Perez, F.; Granger, B.; Kluyver, T.; Ivanov, P.; Frederic, J.; Bussonnier, M.

    2014-12-01

    IPython has provided terminal-based tools for interactive computing in Python since 2001. The notebook document format and multi-process architecture introduced in 2011 have expanded the applicable scope of IPython into teaching, presenting, and sharing computational work, in addition to interactive exploration. The new architecture also allows users to work in any language, with implementations in Python, R, Julia, Haskell, and several other languages. The language agnostic parts of IPython have been renamed to Jupyter, to better capture the notion that a cross-language design can encapsulate commonalities present in computational research regardless of the programming language being used. This architecture offers components like the web-based Notebook interface, that supports rich documents that combine code and computational results with text narratives, mathematics, images, video and any media that a modern browser can display. This interface can be used not only in research, but also for publication and education, as notebooks can be converted to a variety of output formats, including HTML and PDF. Recent developments in the Jupyter project include a multi-user environment for hosting notebooks for a class or research group, a live collaboration notebook via Google Docs, and better support for languages other than Python.

  15. Lithological architecture, geological processes and energy-field environments are major factors for the formation of hydrocarbon reservoirs

    Institute of Scientific and Technical Information of China (English)

    ZHAO Wenzhi; WANG Zecheng; LI Xiaoqing; WANG Hongjun; WANG Zhaoyun

    2005-01-01

    The formation of hydrocarbon reservoirs is controlled by three major factors: lithological architecture, geological processes and energy-field environments. Among the three major factors, lithological architecture provides the storing medium for hydrocarbon; geological processes include hydrocarbon generation, migration, accumulation, preservation and modification; and energy-field environments refer to the various geothermal and geodynamic forces that affect the lithological architecture and drive the geological processes.In this study, we take Kela-2 and Sulige gas reservoirs as two examples to study relationships among the three major factors, and explain how these factors influence the scale and quality of hydrocarbon reservoirs.

  16. COMMUNICATION COMPONENT FORMATION OF TEACHERS’ COMPETENCE IN THE MENTORING PROCESS

    Directory of Open Access Journals (Sweden)

    Vera T. Sopegina

    2016-01-01

    Full Text Available The aim of this article is to present the integration process and special pedagogical competence in solving production and pedagogical challenges in the educational organizations and production enterprises engaged in the training of mentors.Methods. The methods involve the analysis of psycho-pedagogical and methodological literature on the issue; analysis of the Federal State Educational Standards and professional standards; modeling of processes.Results and scientific novelty. The problems of formation of communicative competence in the preparation of teachers are considered. The characteristic of the formation levels of mentoring such as «mentor-formal»; «mentor-theoretician», a «mentor-coach»; «mentor-adviser»; «mentor-professional» are given. The pedagogical potential of the phenomenon of «mentoring» is disclosed; an innovative way of mentoring within the competence approach is shown. The integrative activity of the teacher in solving production and pedagogical problems is analysed.Practical significance. The results can be used by trainers and mentors in the formation of communicative competence of students. The implementation of integration model of pedagogical and production tasks will provide the formation of communicative competence as part of vocational training. Using the obtained results can improve the effectiveness of vocational teacher education.

  17. Field Programmable DSP Arrays - A Novel Reconfigurable Architecture for Efficient Reliazation of Digital Signal Processing Functions

    Directory of Open Access Journals (Sweden)

    Amitabha Sinha

    2013-04-01

    Full Text Available Digital Signal Processing functions are widely used in real time high speed applications. Those functions are generally implemented either on ASICs with inflexibility, or on FPGAs with bottlenecks of relatively smaller utilization factor or lower speed compared to ASIC. The proposed reconfigurable DSP processor is redolent to FPGA, but with basic fixed Common Modules (CMs (like adders, subtractors, multipliers, scaling units, shifters instead of CLBs. This pape r introduces the development of a reconfigurable DSP processor that integrates different filter and transform functions. The switching between DSP functions is occurred by reconfiguring the interconnection between CMs. Validation of the proposed reconfigurable architecture has been achieved on Virtex5 FPGA. The architecture provides sufficient amount of flexibility, parallelism and scalability.

  18. Gender and Computer-Mediated Communication: Group Processes in Problem Solving.

    Science.gov (United States)

    Adrianson, L.

    2001-01-01

    Reports results from a study of university students in Sweden that investigated aspects of communicative processes using face-to-face and computer-mediated communication. Examined influences of gender on communication equality, social relations, and communicative processes and studied differences in self-awareness. Results showed few significant…

  19. The ethics of communicative process: Discourse, otherness, and public space

    Directory of Open Access Journals (Sweden)

    Ângela Cristina Salgueiro Marques

    2011-09-01

    Full Text Available The aim of this paper is to reflect on ethical-moral questions that are present in different dimensions of the contemporary communicative processes. At a first moment, I explain how Habermas defines the concept of discourse ethics witch is capable to allow the articulation and negotiation among the plurality of points of view and citizens in the current societies. In addition, I confer prominence to the role media play in the interconnection of different audiences and dispersed speeches in order to guarantee possibilities of renewal of collective debates in the public sphere. I therefore propose that an ethics of communication instead of be restrained to media devices and its operative dynamics, should consider their connections with citizens’ concrete practices and experiences.

  20. Digital Signal Processing for Optical Coherent Communication Systems

    DEFF Research Database (Denmark)

    Zhang, Xu

    In this thesis, digital signal processing (DSP) algorithms are studied to compensate for physical layer impairments in optical fiber coherent communication systems. The physical layer impairments investigated in this thesis include optical fiber chromatic dispersion, polarization demultiplexing......, light sources frequency and phase offset and phase noise. The studied DSP algorithms are considered as key building blocks in digital coherent receivers for the next generation of optical communication systems such as 112-Gb/s dual polarization (DP) quadrature phase shift keying (QPSK) optical...... spectrum narrowing tolerance 112-Gb/s DP-QPSK optical coherent systems using digital adaptive equalizer. The demonstrated results show that off-line DSP algorithms are able to reduce the bit error rate (BER) penalty induced by signal spectrum narrowing. Third, we also investigate bi...

  1. Art, Science and Architecture: Architecture as a Dynamic Process of Structuring Matter-Energy in the Spatio-Temporal World.

    Science.gov (United States)

    Minai, Asghar Talaye

    Developed were methods of coordinating art and science in relation to the creation of the physical form of the environment. Such an approach has been directed towards a theory of form based on point theory or field theory in architecture and deals with the problem of potentiality or dispositional properties. Part I, Towards a Sociology of…

  2. Probability and Random Processes With Applications to Signal Processing and Communications

    CERN Document Server

    Miller, Scott

    2012-01-01

    Miller and Childers have focused on creating a clear presentation of foundational concepts with specific applications to signal processing and communications, clearly the two areas of most interest to students and instructors in this course. It is aimed at graduate students as well as practicing engineers, and includes unique chapters on narrowband random processes and simulation techniques. The appendices provide a refresher in such areas as linear algebra, set theory, random variables, and more. Probability and Random Processes also includes applications in digital communications, informati

  3. SOA - An Architecture Which Creates a Flexible Link between Business Processes and IT

    Directory of Open Access Journals (Sweden)

    Radu Stefan MOLEAVIN

    2012-05-01

    Full Text Available To be viable, a company must be adapted continously to the market’s requirements. The adaption of a company to the market’s requirements means also changes in the business processes of the firm. Till several years ago, in any enterprise there was a strong link between business processes and IT applications. Any changes in the business processes lead to a change in the IT applications. This means that any change in the business side involves time, human resources and material resources consumption.This fact can be translated in a slow adapting to the market changes and a cost increasing for changing IT applications side necessary for their adaptation to new business market. Today the market changes quickly and it has a great development; this means that the enterprise adaptation to the market’s requirements must be done quickly and with low consumption of either human or material resources. Also, the market changes which cause changes in the business processes should not cause major changes in the IT area. This goal can be achieved using an architecture services-based (SOA for the enterprise. This architecture allows us, like in a puzzle game, to use the same pieces of material ("services" to build different models ("business processes".

  4. Time Reversal Signal Processing in Communications - A Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, A W; Candy, J V; Poggio, A J

    2002-01-30

    A typical communications channel is subjected to a variety of signal distortions, including multipath, that corrupt the information being transmitted and reduce the effective channel capacity. The mitigation of the multipath interference component is an ongoing concern for communication systems operating in complex environments such as might be experienced inside buildings, urban environments, and hilly or heavily wooded areas. Communications between mobile units and distributed sensors, so important to national security, are dependent upon flawless conveyance of information in complex environments. The reduction of this multipath corruption necessitates better channel equalization, i.e., the removal of channel distortion to extract the transmitted information. But, the current state of the art in channel equalization either requires a priori knowledge of the channel or the use of a known training sequence and adaptive filtering. If the ''assumed'' model within the equalization processor does not at least capture the dominant characteristics of the channel, then the received information may still be highly distorted and possibly useless. Also, the processing required for classical equalization is demanding in computational resources. To remedy this situation, many techniques have been investigated to replace classical equalization. Such a technique, the subject of this feasibility study, is Time Reversal Signal Processing (TRSP). Multipath is particularly insidious and a major factor in the deterioration of communication channels. Unlike most other characteristics that corrupt a communications channel, the detrimental effects of multipath cannot be overcome by merely increasing the transmitted power. Although the power in a signal diminishes as a function of the distance between the transmitter and receiver, multipath further degrades a signal by creating destructive interference that results in a loss of received power in a very localized area

  5. 汽车开放系统架构(AUTOSAR)的通讯机制研究%Research of Communication System Based OnAutosar Architecture

    Institute of Scientific and Technical Information of China (English)

    韩峰

    2016-01-01

    Autosaris automotive open system architecture,now it has been one of the industry standard of the automotive electronic software.In the process of automotive electronic control system development,the standard of the Autosarestablishs a complete specification of communicationwhich is called AutosarCOM,and it also includes the definition of data types and mechanism of data attributes.The implementation of theAutosarCOM,simplifies and standardizes the communication control in the process of software development and the designs method of bus management. This article mainly introduces architecture of the Autosar, the Autosarcommunication mechanism based on signal AutosarCOM and unique data control mechanism carries on the thorough research.%AUTOSAR是汽车开放系统体系结构,现已成为汽车电子软件的工业标准之一。在汽车电子控制系统开发过程中,AUTOSAR标准制定了完整的通讯规范即AUOTOSAR COM其中也包括数据类型和数据属性机制的定义。AUOTOSAR COM的实现,简化和规范了在软件开发过程中通讯控制和总线管理的设计方法。文章主要介绍了AUTOSAR体系结构,并对AUTOSAR基于信号的通讯机制AUOTOSAR COM及其特有的数据控制机制进行了深入的研究。

  6. Logic of historical development of the formation process of architectural and construction solutions

    Directory of Open Access Journals (Sweden)

    Baranov Valeriy Aleksandrovich

    2014-05-01

    Full Text Available In research field of development processes of architectural and construction decisions (ACD there is already very considerable scientific, normative and technical material. And still in the end of the research boom in this area (the 90th many authors stated their weak return in practical design. High methodological potential gives understanding of the act of ACD formation as a special kind of activity, and its structure - as historical phenomenon that allows to put two main methodological principles in the basis of the research: the principle of activity and the principle of level organization of historically formed objects. As a result it was succeeded to reveal 6 main stages of historical development of ACD formation process and 6 levels of its modern organization. Origin stage - is the transition from animal to human construction and emergence of the first stage of ACD formation - a measurement. The reproductive stage is characterized by centuries-old reproduction of steady volume forms of constructions. At a composite stage professional presentation detaches external form of a construction from architectural and construction actions and techniques. There occurs transformation into a subject of architectural and construction activity and creation of a method of composition on this basis. At a constructive stage engineers are involved in construction process, there is a change of style of thinking, emergence of construction designs and emergence of a new function of ACD means of configuration, and, at last, final allocation and separation of architectural and construction design from construction. Technological stage is a product of industrialization of construction on which systematization is carried out not only on the level of subject, but also in respect to the operational contents that leads to emergence of ACD program formation. At the sixth, methodological stage of development of ASP, a leading way change of the ACD formation becomes a

  7. A super base station based centralized network architecture for 5G mobile communication systems

    Directory of Open Access Journals (Sweden)

    Manli Qian

    2015-04-01

    Full Text Available To meet the ever increasing mobile data traffic demand, the mobile operators are deploying a heterogeneous network with multiple access technologies and more and more base stations to increase the network coverage and capacity. However, the base stations are isolated from each other, so different types of radio resources and hardware resources cannot be shared and allocated within the overall network in a cooperative way. The mobile operators are thus facing increasing network operational expenses and a high system power consumption. In this paper, a centralized radio access network architecture, referred to as the super base station (super BS, is proposed, as a possible solution for an energy-efficient fifth-generation (5G mobile system. The super base station decouples the logical functions and physical entities of traditional base stations, so different types of system resources can be horizontally shared and statistically multiplexed among all the virtual base stations throughout the entire system. The system framework and main functionalities of the super BS are described. Some key technologies for system implementation, i.e., the resource pooling, real-time virtualization, adaptive hardware resource allocation are also highlighted.

  8. Influence of macromolecular architecture on necking in polymer extrusion film casting process

    Energy Technology Data Exchange (ETDEWEB)

    Pol, Harshawardhan; Banik, Sourya; Azad, Lal Busher; Doshi, Pankaj; Lele, Ashish [CSIR-National Chemical Laboratory, Pune, Maharashtra (India); Thete, Sumeet [Purdue University, West Lafayette, Indiana (United States)

    2015-05-22

    Extrusion film casting (EFC) is an important polymer processing technique that is used to produce several thousand tons of polymer films/coatings on an industrial scale. In this research, we are interested in understanding quantitatively how macromolecular chain architecture (for example long chain branching (LCB) or molecular weight distribution (MWD or PDI)) influences the necking and thickness distribution of extrusion cast films. We have used different polymer resins of linear and branched molecular architecture to produce extrusion cast films under controlled experimental conditions. The necking profiles of the films were imaged and the velocity profiles during EFC were monitored using particle tracking velocimetry (PTV) technique. Additionally, the temperature profiles were captured using an IR thermography and thickness profiles were calculated. The experimental results are compared with predictions of one-dimensional flow model of Silagy et al{sup 1} wherein the polymer resin rheology is modeled using molecular constitutive equations such as the Rolie-Poly (RP) and extended Pom Pom (XPP). We demonstrate that the 1-D flow model containing the molecular constitutive equations provides new insights into the role of macromolecular chain architecture on film necking.{sup 1}D. Silagy, Y. Demay, and J-F. Agassant, Polym. Eng. Sci., 36, 2614 (1996)

  9. 78 FR 24775 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and...

    Science.gov (United States)

    2013-04-26

    ... COMMISSION Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and... United States after importation of certain wireless communication devices, portable music and data processing devices, computers and components thereof by reason of ] infringement of certain claims of...

  10. All-optical signal processing technique for secure optical communication

    Science.gov (United States)

    Qian, Feng-chen; Su, Bing; Ye, Ya-lin; Zhang, Qian; Lin, Shao-feng; Duan, Tao; Duan, Jie

    2015-10-01

    Secure optical communication technologies are important means to solve the physical layer security for optical network. We present a scheme of secure optical communication system by all-optical signal processing technique. The scheme consists of three parts, as all-optical signal processing unit, optical key sequence generator, and synchronous control unit. In the paper, all-optical signal processing method is key technology using all-optical exclusive disjunction (XOR) gate based on optical cross-gain modulation effect, has advantages of wide dynamic range of input optical signal, simple structure and so on. All-optical XOR gate composed of two semiconductor optical amplifiers (SOA) is a symmetrical structure. By controlling injection current, input signal power, delay and filter bandwidth, the extinction ratio of XOR can be greater than 8dB. Finally, some performance parameters are calculated and the results are analyzed. The simulation and experimental results show that the proposed method can be achieved over 10Gbps optical signal encryption and decryption, which is simple, easy to implement, and error-free diffusion.

  11. Research on cognitive, social and cultural processes of written communication.

    Science.gov (United States)

    Arroyo González, Rosario; Salvador Mata, Francisco

    2009-08-01

    This article compiles the investigations carried out by a Research Group of the University of Granada, Spain. Its different projects on writing's cognitive social and cultural processes have been supported by the Spanish Government. This line of research joined together linguistic, psychological, social and cultural contributions to the development of writing from the 1970s. Currently, this line of research develops in collaboration with other European Universities: (a) Interuniversity Centre for Research On Cognitive Processing in Natural and Artificial Systems (ECONA), "La Sapienza" University of Rome (Italy); (b) Anadolu University, (Eskisehir, Turkey); (c) Coimbra University (Portugal); (d) University of Zaragoza (Spain); (e) the Institute of Education of the University of London (United Kingdom). The aforementioned collaboration is materializing into projects like the International Master on Multilingual Writing: Cognitive, Intercultural and Technological Processes of Written Communication ( http://www.multilingualwriting.com ) and the International Congress: Writing in the twenty-first Century: Cognition, Multilinguisim and Technologies, held in Granada ( http://www.asprogrades.org ). This research line is focussed on the development of strategies in writing development, basic to train twenty-first century societies' citizens. In these societies, participation in production media, social exchange and the development of multilingual written communication skills through new computer technologies spread multicultural values. In order to fulfil the social exigencies, it is needed to have the collaboration of research groups for designing and applying international research projects.

  12. New FPSoC-based architecture for efficient FSBM motion estimation processing in video standards

    Science.gov (United States)

    Canals, J. A.; Martínez, M. A.; Ballester, F. J.; Mora, A.

    2007-05-01

    Due to the timing constraints in real time video encoding, hardware accelerator cores are used for video compression. System on Chip (SoC) designing tools offer a complex microprocessor system designing methodologies with an easy Intellectual Property (IP) core integration. This paper presents a PowerPC-based SoC with a motion-estimation accelerator core attached to the system bus. Motion-estimation (ME) algorithms are the most critical part in video compression due to the huge amount of data transfers and processing time. The main goal of our proposed architecture is to minimize the amount of memory accesses, thus exploiting the bandwidth of a direct memory connection. This architecture has been developed using Xilinx XPS, a SoC platforms design tool. The results show that our system is able to process the integer pixel full search block matching (FSBM) motion-estimation process and interframe mode decision of a QCIF frame (176*144 pixels), using a 48*48 pixel searching window, with an embedded PPC in a Xilinx Virtex-4 FPGA running at 100 MHz, in 1.5 ms, 4.5 % of the total processing time at 30 fps.

  13. Computational architecture for image processing on a small unmanned ground vehicle

    Science.gov (United States)

    Ho, Sean; Nguyen, Hung

    2010-08-01

    Man-portable Unmanned Ground Vehicles (UGVs) have been fielded on the battlefield with limited computing power. This limitation constrains their use primarily to teleoperation control mode for clearing areas and bomb defusing. In order to extend their capability to include the reconnaissance and surveillance missions of dismounted soldiers, a separate processing payload is desired. This paper presents a processing architecture and the design details on the payload module that enables the PackBot to perform sophisticated, real-time image processing algorithms using data collected from its onboard imaging sensors including LADAR, IMU, visible, IR, stereo, and the Ladybug spherical cameras. The entire payload is constructed from currently available Commercial off-the-shelf (COTS) components including an Intel multi-core CPU and a Nvidia GPU. The result of this work enables a small UGV to perform computationally expensive image processing tasks that once were only feasible on a large workstation.

  14. Architecture of a Process Broker for Interoperable Geospatial Modeling on the Web

    Directory of Open Access Journals (Sweden)

    Lorenzo Bigagli

    2015-04-01

    Full Text Available The identification of appropriate mechanisms for process sharing and reuse by means of composition is considered a key enabler for the effective uptake of a global Earth Observation infrastructure, currently pursued by the international geospatial research community. Modelers in need of running complex workflows may benefit from outsourcing process composition to a dedicated external service, according to the brokering approach. This work introduces our architecture of a process broker, as a distributed information system for creating, validating, editing, storing, publishing and executing geospatial-modeling workflows. The broker provides a service framework for adaptation, reuse and complementation of existing processing resources (including models and geospatial services in general in the form of interoperable, executable workflows. The described solution has been experimentally applied in several use scenarios in the context of EU-funded projects and the Global Earth Observation System of Systems.

  15. Real-time hypothesis driven feature extraction on parallel processing architectures

    DEFF Research Database (Denmark)

    Granmo, O.-C.; Jensen, Finn Verner

    2002-01-01

    Feature extraction in content-based indexing of media streams is often computational intensive. Typically, a parallel processing architecture is necessary for real-time performance when extracting features brute force. On the other hand, Bayesian network based systems for hypothesis driven feature......, rather than one-by-one. Thereby, the advantages of parallel feature extraction can be combined with the advantages of hypothesis driven feature extraction. The technique is based on a sequential backward feature set search and a correlation based feature set evaluation function. In order to reduce...

  16. Algorithm-structured computer arrays and networks architectures and processes for images, percepts, models, information

    CERN Document Server

    Uhr, Leonard

    1984-01-01

    Computer Science and Applied Mathematics: Algorithm-Structured Computer Arrays and Networks: Architectures and Processes for Images, Percepts, Models, Information examines the parallel-array, pipeline, and other network multi-computers.This book describes and explores arrays and networks, those built, being designed, or proposed. The problems of developing higher-level languages for systems and designing algorithm, program, data flow, and computer structure are also discussed. This text likewise describes several sequences of successively more general attempts to combine the power of arrays wi

  17. Cultural heritage conservation and communication by digital modeling tools. Case studies: minor architectures of the Thirties in the Turin area

    Science.gov (United States)

    Bruno, A., Jr.; Spallone, R.

    2015-08-01

    Between the end of the twenties and the beginning of the World war two Turin, as the most of the Italian cities, was endowed by the fascist regime of many new buildings to guarantee its visibility and to control the territory: the fascist party main houses and the local ones. The style that was adopted for these constructions was inspired by the guide lines of the Modern movement which were spreading by a generation of architects as Le Corbusier, Gropius, Mendelsohn. At the end of the war many buildings were reconverted to several functions that led heavy transformations not respectful of the original worth, other were demolished. Today it's possible to rebuild those lost architectures in their primal format as it was created by their architects on paper (and in their mind). This process can guarantee the three-dimensional perception, the authenticity of the materials and the placement into the Turin urban tissue, using static and dynamic digital representation systems. The "three-dimensional re-drawing" of the projects, thought as an heuristic practice devoted to reveal the original idea of the project, inserts itself in a digital model of the urban and natural context as we can live it today, to simulate the perceptive effects that the building could stir up today. The modeling skills are the basis to product videos able to explore the relationship between the environment and "re-built architectures", describing with the synthetic movie techniques, the main formal and perceptive roots. The model represents a scientific product that can be involved in a virtual archive of cultural goods to preserve the collective memory of the architectural and urban past image of Turin.

  18. C-Band Airport Surface Communications System Standards Development. Phase II Final Report. Volume 1: Concepts of Use, Initial System Requirements, Architecture, and AeroMACS Design Considerations

    Science.gov (United States)

    Hall, Edward; Isaacs, James; Henriksen, Steve; Zelkin, Natalie

    2011-01-01

    This report is provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-Band and L-Band Communications Standard Development and was based on direction provided by FAA project-level agreements for New ATM Requirements-Future Communications. Task 7 included two subtasks. Subtask 7-1 addressed C-band (5091- to 5150-MHz) airport surface data communications standards development, systems engineering, test bed and prototype development, and tests and demonstrations to establish operational capability for the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2 focused on systems engineering and development support of the L-band digital aeronautical communications system (L-DACS). Subtask 7-1 consisted of two phases. Phase I included development of AeroMACS concepts of use, requirements, architecture, and initial high-level safety risk assessment. Phase II builds on Phase I results and is presented in two volumes. Volume I (this document) is devoted to concepts of use, system requirements, and architecture, including AeroMACS design considerations. Volume II describes an AeroMACS prototype evaluation and presents final AeroMACS recommendations. This report also describes airport categorization and channelization methodologies. The purposes of the airport categorization task were (1) to facilitate initial AeroMACS architecture designs and enable budgetary projections by creating a set of airport categories based on common airport characteristics and design objectives, and (2) to offer high-level guidance to potential AeroMACS technology and policy development sponsors and service providers. A channelization plan methodology was developed because a common global methodology is needed to assure seamless interoperability among diverse AeroMACS services potentially supplied by multiple service providers.

  19. An agent-based service-oriented integration architecture for chemical process automation

    Institute of Scientific and Technical Information of China (English)

    Na Luo; Weimin Zhong; Feng Wan; Zhencheng Ye; Feng Qian

    2015-01-01

    In reality, traditional process control system built upon centralized and hierarchical structures presents a weak response to change and is easy to shut down by single failure. Aiming at these problems, a new agent-based service-oriented integration architecture was proposed for chemical process automation system. Web services were dynamical y orchestrated on the internet and agent behaviors were built in them. Data analysis, model, op-timization, control, fault diagnosis and so on were capsuled into different web services. Agents were used for ser-vice compositions by negotiation. A prototype system of poly(ethylene terephthalate) process automation was used as the case study to demonstrate the validation of the integration.

  20. A Three Tier Architecture Applied to LiDAR Processing and Monitoring

    Directory of Open Access Journals (Sweden)

    Efrat Jaeger-Frank

    2006-01-01

    Full Text Available Emerging Grid technologies enable solving scientific problems that involve large datasets and complex analyses, which in the past were often considered difficult to solve. Coordinating distributed Grid resources and computational processes requires adaptable interfaces and tools that provide modularized and configurable environments for accessing Grid clusters and executing high performance computational tasks. Computationally intensive processes are also subject to a high risk of component failures and thus require close monitoring. In this paper we describe a scientific workflow approach to coordinate various resources via data analysis pipelines. We present a three tier architecture for LiDAR interpolation and analysis, a high performance processing of point intensive datasets, utilizing a portal, a scientific workflow engine and Grid technologies. Our proposed solution is available to the community in a unified framework through a shared cyberinfrastructure, the GEON portal, enabling scientists to focus on their scientific work and not be concerned with the implementation of the underlying infrastructure.

  1. Multi-Agent Architecture for Implementation of ITIL Processes: Case of Incident Management Process

    OpenAIRE

    Youssef SEKHARA; Medromi, Hicham; Sayouti, Adil

    2014-01-01

    ITIL (Information Technology Infrastructure Library) is the most widely accepted approach to IT service management in the world. Upon the adoption of ITIL processes, organizations face many challenges that can lead to increased complexity. In this paper we use the advantages of agent technology to make implementation and use of ITIL processes more efficient, starting by the incident management process.

  2. Multi-Agent Architecture for Implementation of ITIL Processes: Case of Incident Management Process

    Directory of Open Access Journals (Sweden)

    Youssef SEKHARA

    2014-08-01

    Full Text Available ITIL (Information Technology Infrastructure Library is the most widely accepted approach to IT service management in the world. Upon the adoption of ITIL processes, organizations face many challenges that can lead to increased complexity. In this paper we use the advantages of agent technology to make implementation and use of ITIL processes more efficient, starting by the incident management process.

  3. 基于安全性评估的民用客机VHF通信电台架构*%Civil Airliner VHF Communication Radio Architecture Based on Safety Assessment

    Institute of Scientific and Technical Information of China (English)

    郑力; 廖祯林

    2013-01-01

    The airworthiness certification for civil airliner VHF communication radio requires device-level safety assessment . This paper briefly outlines the airborne systems and equipment safety assessment guidelines,meth-ods and process . Then it describes the failure modes for each module to compose a VHF communication radioand modular failure rate,and figures out the failure probability of single-channel architecture VHF communica-tion radio with the fault tree method recommended by SAE ARP 4761 . The estimation result indicates that itdoes not meet the fail probability requirements allocated by aircraft grade PSSA (Preliminary System Safety As-sessment). Finally,the non-similar multi-channel architecture of VHF communication radio is proposed in order to reduce the failure probability of the radio . Analysis shows that VHF communication radio with this implemen-tation architecture can achieve lower failure probability than ordinary single-channel implementation architecture VHF communication radio.%  进行设备级的安全性评估是民用客机VHF通信电台适航审定的要求。简述了机载系统和设备的安全性评估指南、方法及过程,描述了VHF通信电台各组成模块的失效模式及失效率,并运用SAE ARP 4761所推荐的故障树方法估算出了单通道架构VHF通信电台的失效概率,估算结果说明单通道架构VHF通信电台不能满足飞机级PSSA(Preliminary System Safety Assessment)分配的失效概率要求。最后,为了降低VHF通信电台的失效概率,提出了VHF通信电台的非相似多通道实现架构。分析表明,与单通道架构相比,非相似多通道实现架构的VHF通信电台具有更低的失效概率。

  4. Using architecture information and real-time resource state to reduce power consumption and communication costs in parallel applications.

    Energy Technology Data Exchange (ETDEWEB)

    Brandt, James M.; Devine, Karen Dragon; Gentile, Ann C.; Leung, Vitus Joseph; Olivier, Stephen Lecler; Pedretti, Kevin; Rajamanickam, Sivasankaran; Bunde, David P.; Deveci, Mehmet; Catalyurek, Umit V.

    2014-09-01

    As computer systems grow in both size and complexity, the need for applications and run-time systems to adjust to their dynamic environment also grows. The goal of the RAAMP LDRD was to combine static architecture information and real-time system state with algorithms to conserve power, reduce communication costs, and avoid network contention. We devel- oped new data collection and aggregation tools to extract static hardware information (e.g., node/core hierarchy, network routing) as well as real-time performance data (e.g., CPU uti- lization, power consumption, memory bandwidth saturation, percentage of used bandwidth, number of network stalls). We created application interfaces that allowed this data to be used easily by algorithms. Finally, we demonstrated the benefit of integrating system and application information for two use cases. The first used real-time power consumption and memory bandwidth saturation data to throttle concurrency to save power without increasing application execution time. The second used static or real-time network traffic information to reduce or avoid network congestion by remapping MPI tasks to allocated processors. Results from our work are summarized in this report; more details are available in our publications [2, 6, 14, 16, 22, 29, 38, 44, 51, 54].

  5. Measuring QoS in an Aeronautical Opportunistic Network Architecture with Limited Access to a Satellite Communications Backhaul

    Directory of Open Access Journals (Sweden)

    Rubén Martínez-Vidal

    2016-01-01

    Full Text Available We measure quality of service (QoS in a wireless network architecture of transoceanic aircraft. A distinguishing characteristic of the network scheme we analyze is that it mixes the concept of Delay Tolerant Networking (DTN through the exploitation of opportunistic contacts, together with direct satellite access in a limited number of the nodes. We provide a graph sparsification technique for deriving a network model that satisfies the key properties of a real aeronautical opportunistic network while enabling scalable simulation. This reduced model allows us to analyze the impact regarding QoS of introducing Internet-like traffic in the form of outgoing data from passengers. Promoting QoS in DTNs is usually really challenging due to their long delays and scarce resources. The availability of satellite communication links offers a chance to provide an improved degree of service regarding a pure opportunistic approach, and therefore it needs to be properly measured and quantified. Our analysis focuses on several QoS indicators such as delivery time, delivery ratio, and bandwidth allocation fairness. Obtained results show significant improvements in all metric indicators regarding QoS, not usually achievable on the field of DTNs.

  6. AN EFFICIENT 3-DIMENSIONAL DISCRETE WAVELET TRANSFORM ARCHITECTURE FOR VIDEO PROCESSING APPLICATION

    Institute of Scientific and Technical Information of China (English)

    Ganapathi Hegde; Pukhraj Vaya

    2012-01-01

    This paper presents an optimized 3-D Discrete Wavelet Transform (3-DDWT) architecture.1-DDWT employed for the design of 3-DDWT architecture uses reduced lifting scheme approach.Further the architecture is optimized by applying block enabling technique,scaling,and rounding of the filter coefficients.The proposed architecture uses biorthogonal (9/7) wavelet filter.The architecture is modeled using Verilog HDL,simulated using ModelSim,synthesized using Xilinx ISE and finally implemented on Virtex-5 FPGA.The proposed 3-DDWT architecture has slice register utilization of 5%,operating frequency of 396 MHz and a power consumption of 0.45 W.

  7. Parallel processing architecture for H.264 deblocking filter on multi-core platforms

    Science.gov (United States)

    Prasad, Durga P.; Sonachalam, Sekar; Kunchamwar, Mangesh K.; Gunupudi, Nageswara Rao

    2012-03-01

    filter for multi core platforms such as HyperX technology. Parallel techniques such as parallel processing of independent macroblocks, sub blocks, and pixel row level are examined in this work. The deblocking architecture consists of a basic cell called deblocking filter unit (DFU) and dependent data buffer manager (DFM). The DFU can be used in several instances, catering to different performance needs the DFM serves the data required for the different number of DFUs, and also manages all the neighboring data required for future data processing of DFUs. This approach achieves the scalability, flexibility, and performance excellence required in deblocking filters.

  8. Robust, Multi-layered Plan Execution and Revision for Operation of a Network of Communication Antennas

    Science.gov (United States)

    Chien, S. A.; Hill, R. W., Jr.; Govindjee, A.; Wang, X.; Estlin, T.; Griesel, M. A.; Lam, R.; Fayyad, K. V.

    1996-01-01

    This paper describes a hierarchical scheduling, planning, control, and execution monitoring architecture for automating operations of a worldwide network of communications antennas. The purpose of this paper is to describe an architecture for automating the process of capturing spacecraft data.

  9. A Secure Group Communication Architecture for a Swarm of Autonomous Unmanned Aerial Vehicles

    Science.gov (United States)

    2008-03-01

    members to use the same decryption key. This shared decryption key is called the Session Encryption Key ( SEK ) or Traffic Encryption Key (TEK...Since everyone shares the SEK , members need to hold additional Key Encryption Keys (KEK) that are used to securely distribute the SEK to each valid...managing this process. To preserve the secrecy of the multicast data, the SEK needs to be updated upon certain events such as a member joining and

  10. The processing architectures of whole-object features: A logical-rules approach.

    Science.gov (United States)

    Moneer, Sarah; Wang, Tony; Little, Daniel R

    2016-09-01

    In this article, we examine whether dimensions comprising the entirety of an object (e.g., size and saturation) are processed independently or pooled into a single whole-object representation. These whole-object features, while notionally separable, sometimes show empirical effects consistent with integrality. A recently proposed theoretical distinction between integral and separable dimensions that emphasizes the time course of information processing, can be used to differentiate whether whole-object features are processed independently, either in serial or in parallel, or pooled into a single coactive process (see, e.g., Little, Nosofsky, Donkin, & Denton, 2013). The current research examines this theoretical distinction in the processing of 3 sets of whole-object-featured stimuli that vary on any pair of the dimensions of saturation, size, and orientation. We found that a mixture of serial and parallel architectures underlies the processing of whole-object features. These results indicate that whole-object features are processed independently. (PsycINFO Database Record

  11. Soft-core dataflow processor architecture optimised for radar signal processing: Article

    CSIR Research Space (South Africa)

    Broich, R

    2014-10-01

    Full Text Available an iterative design methodology to propose a novel softcore streaming processor architecture. The datapaths of this architecture are arranged in a circular pattern, with multiple operands simultaneously flowing between switching multiplexers and functional...

  12. Molecular floating-gate organic nonvolatile memory with a fully solution processed core architecture

    Science.gov (United States)

    Wu, Chao; Wang, Wei; Song, Junfeng

    2016-11-01

    In this paper, we demonstrated a floating-gate organic thin film transistor based nonvolatile memory, in which the core architecture was processed by a sequential three-step solution spin-coating method. The molecular semiconductor 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-Pen) distributing in the matrix of polymer poly(styrene) (PS), acting as the floating-gate and tunneling layer, respectively, was processed by one-step spin-coating from their blending solution. The effect of the proportion of TIPS-Pen in the matrix of PS on the memory performances of devices was researched. As a result, a good nonvolatile memory was achieved, with a memory window larger than 25 V, stable memory endurance property over 500 cycles and retention time longer than 5000 s with a high memory ratio larger than 102, at an optimal proportion of TIPS-Pen in the matrix of PS.

  13. Improving Packet Processing Efficiency on Multi-core Architectures with Single Input Queue

    Directory of Open Access Journals (Sweden)

    Peter Orosz

    2012-06-01

    Full Text Available Generic purpose multi-core PC architectures are facing performance challenges of high rate packet reception on gigabit per second and higher speed network interfaces. In order to assign a CPU core to a networking softIRQ, the single input queue design of the low-level packet processing subsystem relies on the kernel's Symmetric Multiprocessing (SMP scheduler, which does not perform load balancing of the softIRQ instances between the CPU cores. In practice, when single receive queue is used all of the softIRQs are assigned to a single CPU core. This typical arrangement could easily drive to CPU resource exhaustion and high packet loss ratio on high bandwidth interfaces. The non-steady state of the system is triggered by the high arrival rate of the packets. This work presents a proposal for improving the packet processing efficiency in single input queue multi-core systems.

  14. Improvements of sensorimotor processes during action cascading associated with changes in sensory processing architecture-insights from sensory deprivation.

    Science.gov (United States)

    Gohil, Krutika; Hahne, Anja; Beste, Christian

    2016-06-20

    In most everyday situations sensorimotor processes are quite complex because situations often require to carry out several actions in a specific temporal order; i.e. one has to cascade different actions. While it is known that changes to stimuli affect action cascading mechanisms, it is unknown whether action cascading changes when sensory stimuli are not manipulated, but the neural architecture to process these stimuli is altered. In the current study we test this hypothesis using prelingually deaf subjects as a model to answer this question. We use a system neurophysiological approach using event-related potentials (ERPs) and source localization techniques. We show that prelingually deaf subjects show improvements in action cascading. However, this improvement is most likely not due to changes at the perceptual (P1-ERP) and attentional processing level (N1-ERP), but due to changes at the response selection level (P3-ERP). It seems that the temporo-parietal junction (TPJ) is important for these effects to occur, because the TPJ comprises overlapping networks important for the processing of sensory information and the selection of responses. Sensory deprivation thus affects cognitive processes downstream of sensory processing and only these seem to be important for behavioral improvements in situations requiring complex sensorimotor processes and action cascading.

  15. Developing Materials Processing to Performance Modeling Capabilities and the Need for Exascale Computing Architectures (and Beyond)

    Energy Technology Data Exchange (ETDEWEB)

    Schraad, Mark William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Physics and Engineering Models; Luscher, Darby Jon [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Advanced Simulation and Computing

    2016-09-06

    Additive Manufacturing techniques are presenting the Department of Energy and the NNSA Laboratories with new opportunities to consider novel component production and repair processes, and to manufacture materials with tailored response and optimized performance characteristics. Additive Manufacturing technologies already are being applied to primary NNSA mission areas, including Nuclear Weapons. These mission areas are adapting to these new manufacturing methods, because of potential advantages, such as smaller manufacturing footprints, reduced needs for specialized tooling, an ability to embed sensing, novel part repair options, an ability to accommodate complex geometries, and lighter weight materials. To realize the full potential of Additive Manufacturing as a game-changing technology for the NNSA’s national security missions; however, significant progress must be made in several key technical areas. In addition to advances in engineering design, process optimization and automation, and accelerated feedstock design and manufacture, significant progress must be made in modeling and simulation. First and foremost, a more mature understanding of the process-structure-property-performance relationships must be developed. Because Additive Manufacturing processes change the nature of a material’s structure below the engineering scale, new models are required to predict materials response across the spectrum of relevant length scales, from the atomistic to the continuum. New diagnostics will be required to characterize materials response across these scales. And not just models, but advanced algorithms, next-generation codes, and advanced computer architectures will be required to complement the associated modeling activities. Based on preliminary work in each of these areas, a strong argument for the need for Exascale computing architectures can be made, if a legitimate predictive capability is to be developed.

  16. Metrics and the effective computational scientist: process, quality and communication.

    Science.gov (United States)

    Baldwin, Eric T

    2012-09-01

    Recent treatments of computational knowledge worker productivity have focused upon the value the discipline brings to drug discovery using positive anecdotes. While this big picture approach provides important validation of the contributions of these knowledge workers, the impact accounts do not provide the granular detail that can help individuals and teams perform better. I suggest balancing the impact-focus with quantitative measures that can inform the development of scientists. Measuring the quality of work, analyzing and improving processes, and the critical evaluation of communication can provide immediate performance feedback. The introduction of quantitative measures can complement the longer term reporting of impacts on drug discovery. These metric data can document effectiveness trends and can provide a stronger foundation for the impact dialogue.

  17. A soft-core processor architecture optimised for radar signal processing applications

    CSIR Research Space (South Africa)

    Broich, R

    2013-12-01

    Full Text Available Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 4.4 Datapath Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 4.5 Control Unit Architecture...View for FPGA, MATLAB/Sim- ulink plug-ins: Xilinx Sys- tem Generator, Altera DSP Builder) Graphical interconnection of different DSP blocks, multi- rate systems, fused datapath optimisations. Difficult to de- scribe and debug complex designs, no design trade...

  18. Processing of communication calls in Guinea pig auditory cortex.

    Directory of Open Access Journals (Sweden)

    Jasmine M S Grimsley

    Full Text Available Vocal communication is an important aspect of guinea pig behaviour and a large contributor to their acoustic environment. We postulated that some cortical areas have distinctive roles in processing conspecific calls. In order to test this hypothesis we presented exemplars from all ten of their main adult vocalizations to urethane anesthetised animals while recording from each of the eight areas of the auditory cortex. We demonstrate that the primary area (AI and three adjacent auditory belt areas contain many units that give isomorphic responses to vocalizations. These are the ventrorostral belt (VRB, the transitional belt area (T that is ventral to AI and the small area (area S that is rostral to AI. Area VRB has a denser representation of cells that are better at discriminating among calls by using either a rate code or a temporal code than any other area. Furthermore, 10% of VRB cells responded to communication calls but did not respond to stimuli such as clicks, broadband noise or pure tones. Area S has a sparse distribution of call responsive cells that showed excellent temporal locking, 31% of which selectively responded to a single call. AI responded well to all vocalizations and was much more responsive to vocalizations than the adjacent dorsocaudal core area. Areas VRB, AI and S contained units with the highest levels of mutual information about call stimuli. Area T also responded well to some calls but seems to be specialized for low sound levels. The two dorsal belt areas are comparatively unresponsive to vocalizations and contain little information about the calls. AI projects to areas S, VRB and T, so there may be both rostral and ventral pathways for processing vocalizations in the guinea pig.

  19. Mechanical stress in silicon nanosized architectures: Defects of SOD processed silica filler

    Energy Technology Data Exchange (ETDEWEB)

    Ricci, Pier Carlo, E-mail: carlo.ricci@dsf.unica.it [Dipartimento di Fisica, Università di Cagliari, s.p. n 8 Km 0.700, 09042 Monserrato, Cagliari (Italy); Casula, Riccardo [Dipartimento di Fisica, Università di Cagliari, s.p. n 8 Km 0.700, 09042 Monserrato, Cagliari (Italy); Gulleri, Gianluca; Fumagalli, Francesco [Micron Semiconductor Italia, s.r.l. via Camillo Olivetti, 2 20864 Agrate Brianza, MB (Italy); Carbonaro, Carlo Maria; Corpino, Riccardo [Dipartimento di Fisica, Università di Cagliari, s.p. n 8 Km 0.700, 09042 Monserrato, Cagliari (Italy)

    2014-07-25

    Highlights: • Structural and optical properties of silica filled STI architectures. • The silica filler induces a compressive stress. • PL spectra show a large distribution of emitting defects in the UV–blue. • The defects were identified and located at the silica–liner interface. - Abstract: The mechanical stress in nanosized silicon architectures is studied in shallow trench isolation systems with different liners and spin on dielectrics processed silica filler by means of Raman spectroscopy. The nanopatterning of silicon wafers causes a tensile stress of the system whereas the presence of the filler induces a compressive stress which depends on the interaction between silica filler and liner: by changing the liner from silicon dioxide to silicon nitride one can induce a larger compressive stress. The analysis of the ultraviolet excited emission properties in the visible range (nanosecond lasting bands at 2.5, 3.0 and 3.3 eV) allowed us to individuate and locate silica related defects and to correlate their presence to the induced compressive stress.

  20. Advanced information processing system: The Army Fault-Tolerant Architecture detailed design overview

    Science.gov (United States)

    Harper, Richard E.; Babikyan, Carol A.; Butler, Bryan P.; Clasen, Robert J.; Harris, Chris H.; Lala, Jaynarayan H.; Masotto, Thomas K.; Nagle, Gail A.; Prizant, Mark J.; Treadwell, Steven

    1994-01-01

    The Army Avionics Research and Development Activity (AVRADA) is pursuing programs that would enable effective and efficient management of large amounts of situational data that occurs during tactical rotorcraft missions. The Computer Aided Low Altitude Night Helicopter Flight Program has identified automated Terrain Following/Terrain Avoidance, Nap of the Earth (TF/TA, NOE) operation as key enabling technology for advanced tactical rotorcraft to enhance mission survivability and mission effectiveness. The processing of critical information at low altitudes with short reaction times is life-critical and mission-critical necessitating an ultra-reliable/high throughput computing platform for dependable service for flight control, fusion of sensor data, route planning, near-field/far-field navigation, and obstacle avoidance operations. To address these needs the Army Fault Tolerant Architecture (AFTA) is being designed and developed. This computer system is based upon the Fault Tolerant Parallel Processor (FTPP) developed by Charles Stark Draper Labs (CSDL). AFTA is hard real-time, Byzantine, fault-tolerant parallel processor which is programmed in the ADA language. This document describes the results of the Detailed Design (Phase 2 and 3 of a 3-year project) of the AFTA development. This document contains detailed descriptions of the program objectives, the TF/TA NOE application requirements, architecture, hardware design, operating systems design, systems performance measurements and analytical models.

  1. Lithospheric architecture and deformation of NE Tibet: New insights on the interplay of regional tectonic processes

    Science.gov (United States)

    Guo, Xiaoyu; Gao, Rui; Li, Sanzhong; Xu, Xiao; Huang, Xingfu; Wang, Haiyan; Li, Wenhui; Zhao, Shujuan; Li, Xiyao

    2016-09-01

    GPS measurements indicate rapid lateral extrusion of the NE Tibetan Plateau, which causes active NE-directed crustal shortening and has initiated oblique shearing along the margins of NE Tibet. However, the Tibetan highlands terminate around 103°E longitude and topographic relief disappears to the northeast. The exact reasons for this drop in elevation remain obscure due to widespread Tertiary sediments and Quaternary loess, which obscure details of the lithospheric structure. This study describes a new 310 km-long deep seismic reflection line striking NE-SW across the interior of NE Tibet. Integrating its data with a previously described 165 km-long deep seismic profile of the Tibet-Ordos transition zone together, these datasets provide a complete picture of the crustal architecture of the north-easternmost Tibetan Plateau. Gravity anomaly and previous geological evidence also help constrain complex deformation pattern in the region. Interpretations of these patterns indicate the importance of the large-scale sinistral Haiyuan fault zone and inherited vertical variation in mechanical properties of the lithosphere in the overall tectonic evolution of the NE Tibetan Plateau. The overall crustal architecture obtained in this study provides spatial context for the neotectonic evolution of NE Tibet and helps constrain the interplay of geologic and geodynamic processes affecting NE Tibet and adjacent regions.

  2. Rethinking Communication in Innovation Processes: Creating Space for Change in Complex Systems

    NARCIS (Netherlands)

    Leeuwis, C.; Aarts, N.

    2011-01-01

    This paper systematically rethinks the role of communication in innovation processes, starting from largely separate theoretical developments in communication science and innovation studies. Literature review forms the basis of the arguments presented. The paper concludes that innovation is a collec

  3. Rethinking communication in innovation processes: creating space for change in complex systems

    NARCIS (Netherlands)

    Leeuwis, C.; Aarts, N.

    2011-01-01

    This paper systematically rethinks the role of communication in innovation processes, starting from largely separate theoretical developments in communication science and innovation studies. Literature review forms the basis of the arguments presented. The paper concludes that innovation is a

  4. Rethinking Communication in Innovation Processes: Creating Space for Change in Complex Systems

    NARCIS (Netherlands)

    Leeuwis, C.; Aarts, N.

    2011-01-01

    This paper systematically rethinks the role of communication in innovation processes, starting from largely separate theoretical developments in communication science and innovation studies. Literature review forms the basis of the arguments presented. The paper concludes that innovation is a

  5. Functional communication within a perceptual network processing letters and pseudoletters.

    Science.gov (United States)

    Herdman, Anthony T

    2011-10-01

    Many studies have identified regions within human ventral visual stream to be important for object identification and categorization; however, knowledge of how perceptual information is communicated within the visual network is still limited. Current theories posit that if a high correspondence between incoming sensory information and internal representations exists, then the object is rapidly identified, and if there is not, then the object requires extra detailed processing. Event-related responses from the present magnetoencephalography study showed two main effects. The N1m peak latencies were approximately 15 milliseconds earlier to familiar letters than to unfamiliar pseudoletters, and the N2m was more negative to pseudoletters than to letters. Event-related beamforming analyses identified these effects to be within bilateral visual cortices with a right lateralization for the N2m effect. Furthermore, functional connectivity analyses revealed that gamma-band (50-80 Hz) oscillatory phase synchronizations among occipital regions were greater to letters than to pseudoletters (around 85 milliseconds). However, during a later time interval between 245 and 375 milliseconds, pseudoletters elicited greater gamma-band phase synchronizations among a more distributed occipital network than did letters. These findings indicate that familiar object processing begins by at least 85 milliseconds, which could represent an initial match to an internal template. In addition, unfamiliar object processing persisted longer than that for familiar objects, which could reflect greater attention to inexperienced objects to determine their identity and/or to consolidate a new template to aid in future identification.

  6. Architectural geometry

    NARCIS (Netherlands)

    Pottmann, Helmut; Eigensatz, Michael; Vaxman, A.; Wallner, Johannes

    2015-01-01

    Around 2005 it became apparent in the geometry processing community that freeform architecture contains many problems of a geometric nature to be solved, and many opportunities for optimization which however require geometric understanding. This area of research, which has been called architectural

  7. Architectural geometry

    NARCIS (Netherlands)

    Pottmann, Helmut; Eigensatz, Michael; Vaxman, A.; Wallner, Johannes

    2015-01-01

    Around 2005 it became apparent in the geometry processing community that freeform architecture contains many problems of a geometric nature to be solved, and many opportunities for optimization which however require geometric understanding. This area of research, which has been called architectural

  8. Process-based modelling of tidally-influenced estuarine morphodynamics and bar architecture

    Science.gov (United States)

    van de Lageweg, Wietse; Feldman, Howard

    2017-04-01

    Estuaries represent one of the most dynamic environments on Earth with continuously changing channels and shoals of sand and mud that are driven by ebb and flood currents that interact with chemical and biological processes. These transition zones between terrestrial and marine environments generally have complex bar depositional patterns due to the dominance of river processes in proximal areas transitioning to the dominance of oceanic processes in distal areas. Although modern estuaries have been studied for many years, it is largely unknown in which manner basin geometry and tidal range impact bar formation, and how this would affect the subsurface architecture. This study applies the morphodynamic model Delft3D to test models of estuarine bar morphology and stratigraphy along the fluvial-tidal transition. Observations from the modern Columbia River estuary and idealized estuaries are combined to systematically evaluate estuarine hydrodynamics, bar formation and bar preservation. A unique aspect of the methodology is that morphological as well as subsurface data are collected, thus enabling the estuarine bar morphodynamics to be related explicitly to the associated depositional product. Model results highlight the complex and dynamic flow patterns in the Columbia River estuary, which are consistent with observations from local tide gauges. By systematically varying tidal range and basin width, it is shown that estuarine bar dimensions are primarily affected by estuary width, and that tidal range has a secondary effect. An increase in estuary width results in a higher bar braiding index, a larger number of bars as well as longer bars, wider bars and thicker bar deposits. Synthetic architectures that can be compared directly to the sedimentary record show a high degree of fragmentation within estuarine bars. Statistical distributions summarising the internal structure of estuarine bars provide much-needed quantification of the preservation of estuarine bars and

  9. The Optimization of Algorithms in the Process of Temporal Data Mining Using the Compute Unified Device Architecture

    Directory of Open Access Journals (Sweden)

    Alexandru PIRJAN

    2010-09-01

    Full Text Available Considering the importance and usefulness of real time data mining, in recent years the concern of researchers to discover new hardware architectures that can manage and process large volumes of data has increased significantly. In this paper the performance of algorithms for temporal data mining that are implemented in the new Compute Unified Device Architecture (CUDA from the latest generation of graphics processing units (GPU will be analyzed and reviewed. The performance will be evaluated taking into account the type of algorithm, data access, the problems` size, the GPU’s processor generation, the number of threads processed

  10. 2012 Proceedings of the International Conference on Communications, Signal Processing, and Systems

    CERN Document Server

    Wang, Wei; Mu, Jiasong; Liang, Jing; Zhang, Baoju; Pi, Yiming; Zhao, Chenglin

    2012-01-01

    Communications, Signal Processing, and Systems is a collection of contributions coming out of the International Conference on Communications, Signal Processing, and Systems (CSPS) held October 2012. This book provides the state-of-art developments of Communications, Signal Processing, and Systems, and their interactions in multidisciplinary fields, such as Smart Grid. The book also examines Radar Systems, Sensor Networks, Radar Signal Processing, Design and Implementation of Signal Processing Systems and Applications. Written by experts and students in the fields of Communications, Signal Processing, and Systems.

  11. Using the ACT-R architecture to specify 39 quantitative process models of decision making

    Directory of Open Access Journals (Sweden)

    Julian N. Marewski

    2011-08-01

    Full Text Available Hypotheses about decision processes are often formulated qualitatively and remain silent about the interplay of decision, memorial, and other cognitive processes. At the same time, existing decision models are specified at varying levels of detail, making it difficult to compare them. We provide a methodological primer on how detailed cognitive architectures such as ACT-R allow remedying these problems. To make our point, we address a controversy, namely, whether noncompensatory or compensatory processes better describe how people make decisions from the accessibility of memories. We specify 39 models of accessibility-based decision processes in ACT-R, including the noncompensatory recognition heuristic and various other popular noncompensatory and compensatory decision models. Additionally, to illustrate how such models can be tested, we conduct a model comparison, fitting the models to one experiment and letting them generalize to another. Behavioral data are best accounted for by race models. These race models embody the noncompensatory recognition heuristic and compensatory models as a race between competing processes, dissolving the dichotomy between existing decision models.

  12. A Study of an Architecture Design Learning Process Based on Social Learning, Course Teaching, Interaction, and Analogical Thinking

    Directory of Open Access Journals (Sweden)

    Yun-Wu Wu

    2014-01-01

    Full Text Available The students in the vocational education of architecture design in Taiwan often face many learning obstacles, such as no problem solving ability and lack of creativity. Therefore, this study used a social learning model as a learning strategy in the architecture design learning process to solve related learning difficulties. Firstly, this study used cognitive development teaching activities and a learning process based on analogical thinking and analogical reasoning to build the social learning model. Secondly, the social learning model of this study was implemented in the teaching of a required course of architecture design for 120 freshmen in China University of Technology. The questionnaire survey results were then statically analyzed and compared to measure the differences in the students’ knowledge about architecture designs before and after the teaching in this study. In this study, the social learning model is proven helpful in inspiring the students’ creativity by converting new knowledge of architecture design into schemas and hence retaining the new knowledge for future application. The social learning model can be applied in the teaching of architecture design in other schools, while more research can be conducted in the future to further confirm its feasibility to promote effective learning.

  13. Engaging communication experts in a Delphi process to identify patient behaviors that could enhance communication in medical encounters

    Directory of Open Access Journals (Sweden)

    Stein Terry

    2010-04-01

    Full Text Available Abstract Background The communication literature currently focuses primarily on improving physicians' verbal and non-verbal behaviors during the medical interview. The Four Habits Model is a teaching and research framework for physician communication that is based on evidence linking specific communication behaviors with processes and outcomes of care. The Model conceptualizes basic communication tasks as "Habits" and describes the sequence of physician communication behaviors during the clinical encounter associated with improved outcomes. Using the Four Habits Model as a starting point, we asked communication experts to identify the verbal communication behaviors of patients that are important in outpatient encounters. Methods We conducted a 4-round Delphi process with 17 international experts in communication research, medical education, and health care delivery. All rounds were conducted via the internet. In round 1, experts reviewed a list of proposed patient verbal communication behaviors within the Four Habits Model framework. The proposed patient verbal communication behaviors were identified based on a review of the communication literature. The experts could: approve the proposed list; add new behaviors; or modify behaviors. In rounds 2, 3, and 4, they rated each behavior for its fit (agree or disagree with a particular habit. After each round, we calculated the percent agreement for each behavior and provided these data in the next round. Behaviors receiving more than 70% of experts' votes (either agree or disagree were considered as achieving consensus. Results Of the 14 originally-proposed patient verbal communication behaviors, the experts modified all but 2, and they added 20 behaviors to the Model in round 1. In round 2, they were presented with 59 behaviors and 14 options to remove specific behaviors for rating. After 3 rounds of rating, the experts retained 22 behaviors. This set included behaviors such as asking questions

  14. Hidden Realities inside PBL Design Processes: Is Consensus Design an Impossible Clash of Interest between the Individual and the Collective, and Is Architecture Its First Victim?

    Science.gov (United States)

    Pihl, Ole

    2015-01-01

    How do architecture students experience the contradictions between the individual and the group at the Department of Architecture and Design of Aalborg University? The Problem-Based Learning model has been extensively applied to the department's degree programs in coherence with the Integrated Design Process, but is a group-based architecture and…

  15. NLP-PIER: A Scalable Natural Language Processing, Indexing, and Searching Architecture for Clinical Notes.

    Science.gov (United States)

    McEwan, Reed; Melton, Genevieve B; Knoll, Benjamin C; Wang, Yan; Hultman, Gretchen; Dale, Justin L; Meyer, Tim; Pakhomov, Serguei V

    2016-01-01

    Many design considerations must be addressed in order to provide researchers with full text and semantic search of unstructured healthcare data such as clinical notes and reports. Institutions looking at providing this functionality must also address the big data aspects of their unstructured corpora. Because these systems are complex and demand a non-trivial investment, there is an incentive to make the system capable of servicing future needs as well, further complicating the design. We present architectural best practices as lessons learned in the design and implementation NLP-PIER (Patient Information Extraction for Research), a scalable, extensible, and secure system for processing, indexing, and searching clinical notes at the University of Minnesota.

  16. Choice architectural nudge interventions to promote vegetable consumption based on automatic processes decision-making

    DEFF Research Database (Denmark)

    Skov, Laurits Rohden; Friis Rasmussen, Rasmus; Møller Andersen, Pernille;

    2014-01-01

    Objective: To test the effectiveness of three types of choice architectural nudges to promote vegetable consumption among Danish people. The experiment aims at providing evidence on the influence of automatic processing system in the food choice situation in an all you can eat buffet serving...... of the salad separately to increase choices compared to a pre-mixed salad. Results: A total of 92 people (dropout rate=21 %) partook in the study (60.2% female) with an average age of 26.5. Nudge 1 (N=27) found a significant decrease in total energy consumption due to high decrease in meat consumption (p..., but promoted health by decreasing total energy intake which suggests that visual variety of fruit and greens prompts a healthy-eater subconscious behaviour....

  17. Pixel architectures in a HV-CMOS process for the ATLAS inner detector upgrade

    Science.gov (United States)

    Degerli, Y.; Godiot, S.; Guilloux, F.; Hemperek, T.; Krüger, H.; Lachkar, M.; Liu, J.; Orsini, F.; Pangaud, P.; Rymaszewski, P.; Wang, T.

    2016-12-01

    In this paper, design details and simulation results of new pixel architectures designed in LFoundry 150 nm high voltage CMOS process in the framework of the ATLAS high luminosity inner detector upgrade are presented. These pixels can be connected to the FE-I4 readout chip via bump bonding or glue and some of them can also be tested without a readout chip. Negative high voltage is applied to the high resistivity (> 2 kΩ .cm) substrate in order to deplete the deep n-well charge collection diode, ensuring good charge collection and radiation tolerance. In these pixels, the front-end has been implemented inside the diode using both NMOS and PMOS transistors. The pixel pitch is 50 μm × 250 μm for all pixels. These pixels have been implemented in a demonstrator chip called LFCPIX.

  18. Experimental Study of the Cloud Architecture Selection for Effective Big Data Processing

    Directory of Open Access Journals (Sweden)

    Evgeny Nikulchev

    2015-06-01

    Full Text Available Big data dictate their requirements to the hardware and software. Simple migration to the cloud data processing, while solving the problem of increasing computational capabilities, however creates some issues: the need to ensure the safety, the need to control the quality during data transmission, the need to optimize requests. Computational cloud does not simply provide scalable resources but also requires network infrastructure, unknown routes and the number of user requests. In addition, during functioning situation can occur, in which you need to change the architecture of the application — part of the data needs to be placed in a private cloud, part in a public cloud, part stays on the client.

  19. Performance analysis of massively parallel embedded hardware architectures for retinal image processing

    Directory of Open Access Journals (Sweden)

    Osorio Roberto

    2011-01-01

    Full Text Available Abstract This paper examines the implementation of a retinal vessel tree extraction technique on different hardware platforms and architectures. Retinal vessel tree extraction is a representative application of those found in the domain of medical image processing. The low signal-to-noise ratio of the images leads to a large amount of low-level tasks in order to meet the accuracy requirements. In some applications, this might compromise computing speed. This paper is focused on the assessment of the performance of a retinal vessel tree extraction method on different hardware platforms. In particular, the retinal vessel tree extraction method is mapped onto a massively parallel SIMD (MP-SIMD chip, a massively parallel processor array (MPPA and onto an field-programmable gate arrays (FPGA.

  20. The Montage architecture for grid-enabled science processing of large, distributed datasets

    Science.gov (United States)

    Jacob, Joseph C.; Katz, Daniel S .; Prince, Thomas; Berriman, Bruce G.; Good, John C.; Laity, Anastasia C.; Deelman, Ewa; Singh, Gurmeet; Su, Mei-Hui

    2004-01-01

    Montage is an Earth Science Technology Office (ESTO) Computational Technologies (CT) Round III Grand Challenge investigation to deploy a portable, compute-intensive, custom astronomical image mosaicking service for the National Virtual Observatory (NVO). Although Montage is developing a compute- and data-intensive service for the astronomy community, we are also helping to address a problem that spans both Earth and Space science, namely how to efficiently access and process multi-terabyte, distributed datasets. In both communities, the datasets are massive, and are stored in distributed archives that are, in most cases, remote from the available Computational resources. Therefore, state of the art computational grid technologies are a key element of the Montage portal architecture. This paper describes the aspects of the Montage design that are applicable to both the Earth and Space science communities.

  1. Architectural Anthropology

    DEFF Research Database (Denmark)

    Stender, Marie

    -anthropology. Within the field of architecture, however, there has not yet been quite the same eagerness to include anthropological approaches in design processes. This paper discusses why this is so and how and whether architectural anthropology has different conditions and objectives than other types of design...... and other spaces that architects are preoccupied with. On the other hand, the distinction between architecture and design is not merely one of scale. Design and architecture represent – at least in Denmark – also quite different disciplinary traditions and methods. Where designers develop prototypes......, and that this will restrict the creative design process. Also, the end user of architecture is not easily identified, as a new building should not just accommodate the needs of specific residents but also those of neighbours, future residents, other citizens and maybe society as such. The paper explores the challenges...

  2. Density functional theory calculation on many-cores hybrid central processing unit-graphic processing unit architectures.

    Science.gov (United States)

    Genovese, Luigi; Ospici, Matthieu; Deutsch, Thierry; Méhaut, Jean-François; Neelov, Alexey; Goedecker, Stefan

    2009-07-21

    We present the implementation of a full electronic structure calculation code on a hybrid parallel architecture with graphic processing units (GPUs). This implementation is performed on a free software code based on Daubechies wavelets. Such code shows very good performances, systematic convergence properties, and an excellent efficiency on parallel computers. Our GPU-based acceleration fully preserves all these properties. In particular, the code is able to run on many cores which may or may not have a GPU associated, and thus on parallel and massive parallel hybrid machines. With double precision calculations, we may achieve considerable speedup, between a factor of 20 for some operations and a factor of 6 for the whole density functional theory code.

  3. Nanomembrane Canister Architectures for the Visualization and Filtration of Oxyanion Toxins with One-Step Processing.

    Science.gov (United States)

    Aboelmagd, Ahmed; El-Safty, Sherif A; Shenashen, Mohamed A; Elshehy, Emad A; Khairy, Mohamed; Sakaic, Masaru; Yamaguchi, Hitoshi

    2015-11-01

    Nanomembrane canister-like architectures were fabricated by using hexagonal mesocylinder-shaped aluminosilica nanotubes (MNTs)-porous anodic alumina (PAA) hybrid nanochannels. The engineering pattern of the MNTs inside a 60 μm-long membrane channel enabled the creation of unique canister-like channel necks and cavities. The open-tubular canister architecture design provides controllable, reproducible, and one-step processing patterns of visual detection and rejection/permeation of oxyanion toxins such as selenite (SeO3(2-)) in aquatic environments (i.e., in ground and river water sources) in the Ibaraki Prefecture of Japan. The decoration of organic ligand moieties such as omega chrome black blue (OCG) into inorganic Al2O3@tubular SiO2/Al2O3 canister membrane channel cavities led to the fabrication of an optical nanomembrane sensor (ONS). The OCG ligand was not leached from the canister as observed in washing, sensing, and recovery assays of selenite anions in solution, which enabled its multiple reuse. The ONS makes a variety of alternate processing analyses of selective quantification, visual detection, rejection/permeation, and recovery of toxic selenite quick and simple without using complex instrumentation. Under optimal conditions, the ONS canister exhibited a high selectivity toward selenite anions relative to other ions and a low-level detection limit of 0.0093 μM. Real analytical data showed that approximately 96% of SeO3(2-) anions can be recovered from aquatic and wastewater samples. The ONS canister holds potential for field recovery applications of toxic selenite anions from water. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Independent Sampling vs Interitem Dependencies in Whole Report Processing: Contributions of Processing Architecture and Variable Attention.

    Science.gov (United States)

    Busey, Thomas A.; Townsend, James T.

    2001-04-01

    All current models of visual whole report processing assume perceptual independence among the displayed items in which the perceptual processing of individual items is not affected by other items in the display. However, models proposed by Townsend (1981, Acta Psychologica 47, 149-173), Shibuya and Bundesen (1988, Journal of Experimental Psychology: Human Perception and Performance 14, 591-600), and Bundesen (1990, Psychological Review 97, 523-547) contain postperceptual buffers that must predict negative dependencies. The perceptual-independence assumption forms what we term the modal model class. A recent example of a model that assumes perceptual independence is the Independent Sampling Model of Loftus, Busey, and Senders (1993, Perception and Psychophysics 54, 535-554). The fundamental independence assumption has only been directly tested once before, where tests revealed no dependencies except those produced by guessing. The present study tests the independence assumption using several different statistics and, contrary to most extant models of whole report, finds significant positive dependence. Poisson models do predict a positive dependence and we develop a succinctly parameterized version, the Weighted Path Poisson Model, which allows the finishing order to be a weighted probabilistic mechanism. However, it does not predict the data quite as well as a new model, the Variable Attention Model, which allows independence within trials (unlike the Poisson models). This model assumes that attention (or, potentially, other aspects such as signal quality) varies widely across trials, thus predicting an overall positive dependence. Intuitions for and against the competing models are discussed. In addition, we show, through mimicking formulae, that models which contain the proper qualitative type of dependence structure can be cast in either serial or parallel form. Copyright 2001 Academic Press.

  5. Open Computer Forensic Architecture a Way to Process Terabytes of Forensic Disk Images

    Science.gov (United States)

    Vermaas, Oscar; Simons, Joep; Meijer, Rob

    This chapter describes the Open Computer Forensics Architecture (OCFA), an automated system that dissects complex file types, extracts metadata from files and ultimately creates indexes on forensic images of seized computers. It consists of a set of collaborating processes, called modules. Each module is specialized in processing a certain file type. When it receives a so called 'evidence', the information that has been extracted so far about the file together with the actual data, it either adds new information about the file or uses the file to derive a new 'evidence'. All evidence, original and derived, is sent to a router after being processed by a particular module. The router decides which module should process the evidence next, based upon the metadata associated with the evidence. Thus the OCFA system can recursively process images until from every compound file the embedded files, if any, are extracted, all information that the system can derive, has been derived and all extracted text is indexed. Compound files include, but are not limited to, archive- and zip-files, disk images, text documents of various formats and, for example, mailboxes. The output of an OCFA run is a repository full of derived files, a database containing all extracted information about the files and an index which can be used when searching. This is presented in a web interface. Moreover, processed data is easily fed to third party software for further analysis or to be used in data mining or text mining-tools. The main advantages of the OCFA system are Scalability, it is able to process large amounts of data.

  6. Communication

    NARCIS (Netherlands)

    Sigafoos, J.; Lancioni, G.E.; O'Reilly, M.F.; Lang, R.; Singh, N.N.; Didden, H.C.M.; Green, V.A.; Marschik, P.B.

    2016-01-01

    Communication disorders are common among people with intellectual disabilities. Consequently, enhancing the communication skills of such individuals is a major intervention priority. This chapter reviews the nature and prevalence of the speech, language, and communication problems associated with

  7. Healing Architecture

    DEFF Research Database (Denmark)

    Folmer, Mette Blicher; Mullins, Michael; Frandsen, Anne Kathrine

    2012-01-01

    The project examines how architecture and design of space in the intensive unit promotes or hinders interaction between relatives and patients. The primary starting point is the relatives. Relatives’ support and interaction with their loved ones is important in order to promote the patients healing...... process. Therefore knowledge on how space can support interaction is fundamental for the architect, in order to make the best design solutions. Several scientific studies document that the hospital's architecture and design are important for human healing processes, including how the physical environment...... architectural and design solutions in order to improve quality of interaction between relative and patient in the hospital's intensive unit....

  8. Attuning: A Communication Process between People with Severe and Profound Intellectual Disability and Their Interaction Partners

    Science.gov (United States)

    Griffiths, Colin; Smith, Martine

    2016-01-01

    Background: People with severe and profound intellectual disability typically demonstrate a limited ability to communicate effectively. Most of their communications are non-verbal, often idiosyncratic and ambiguous. This article aims to identify the process that regulates communications of this group of people with others and to describe the…

  9. Defining Business Communication Using the Movie "The Insider" as Mediator of Students' Thought Processes.

    Science.gov (United States)

    Rodriguez-Talavera, Leticia

    Business communication is different from other domains in that its contextual meaning requires previous metacognitive mediation of signs. The communicative process in business is aimed at accomplishing a specific outcome. Various forms of meaning come into play in business communication such as denotative, connotative, stylistic, affective,…

  10. Attuning: A Communication Process between People with Severe and Profound Intellectual Disability and Their Interaction Partners

    Science.gov (United States)

    Griffiths, Colin; Smith, Martine

    2016-01-01

    Background: People with severe and profound intellectual disability typically demonstrate a limited ability to communicate effectively. Most of their communications are non-verbal, often idiosyncratic and ambiguous. This article aims to identify the process that regulates communications of this group of people with others and to describe the…

  11. Media Exposure, Interpersonal Communication and the Electoral Decision Process.

    Science.gov (United States)

    Kimsey, William D.; Hantz, Alan

    The relationships among mass media, interpersonal communication, and voting behavior were explored in a two-stage panel study of 141 respondents during a 1974 Illinois congressional election. Analyses of perceived exposures to mass media and to interpersonal communication were interpreted as supporting Rogers and Shoemakers' (1971)…

  12. Problems in Cutaneous Communication from Psychophysics to Information Processing.

    Science.gov (United States)

    Gilmer, B. VonHaller; Clark, Leslie L., Ed.

    After reviewing the history of communication through the skin, this paper considers recent research into the problem of cutaneous stimulation induced both mechanically and electrically. The general demands of a cutaneous communication system are discussed, and four primary dimensions of cutaneous stimulation are summarized (locus, intensity,…

  13. Processing data communications events by awakening threads in parallel active messaging interface of a parallel computer

    Energy Technology Data Exchange (ETDEWEB)

    Archer, Charles J.; Blocksome, Michael A.; Ratterman, Joseph D.; Smith, Brian E.

    2016-03-15

    Processing data communications events in a parallel active messaging interface (`PAMI`) of a parallel computer that includes compute nodes that execute a parallel application, with the PAMI including data communications endpoints, and the endpoints are coupled for data communications through the PAMI and through other data communications resources, including determining by an advance function that there are no actionable data communications events pending for its context, placing by the advance function its thread of execution into a wait state, waiting for a subsequent data communications event for the context; responsive to occurrence of a subsequent data communications event for the context, awakening by the thread from the wait state; and processing by the advance function the subsequent data communications event now pending for the context.

  14. Hardware Architecture Study for NASA's Space Software Defined Radios

    Science.gov (United States)

    Reinhart, Richard C.; Scardelletti, Maximilian C.; Mortensen, Dale J.; Kacpura, Thomas J.; Andro, Monty; Smith, Carl; Liebetreu, John

    2008-01-01

    This study defines a hardware architecture approach for software defined radios to enable commonality among NASA space missions. The architecture accommodates a range of reconfigurable processing technologies including general purpose processors, digital signal processors, field programmable gate arrays (FPGAs), and application-specific integrated circuits (ASICs) in addition to flexible and tunable radio frequency (RF) front-ends to satisfy varying mission requirements. The hardware architecture consists of modules, radio functions, and and interfaces. The modules are a logical division of common radio functions that comprise a typical communication radio. This paper describes the architecture details, module definitions, and the typical functions on each module as well as the module interfaces. Trade-offs between component-based, custom architecture and a functional-based, open architecture are described. The architecture does not specify the internal physical implementation within each module, nor does the architecture mandate the standards or ratings of the hardware used to construct the radios.

  15. A Network Software Architecture Suitable for Service Customization

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This paper explores the service customization in the view of network software architectures. The authors first abstract a network system into a framework that consists of several layered basic systems and then propose a component-based network software architecture for one basic system of network software, which is suitable for service customization. The network software architecture is formalized with the theory of Communicating Sequential Process and show its possible applications in areas of personal service environment and service customization.

  16. Intention processing in communication: a common brain network for language and gestures.

    Science.gov (United States)

    Enrici, Ivan; Adenzato, Mauro; Cappa, Stefano; Bara, Bruno G; Tettamanti, Marco

    2011-09-01

    Human communicative competence is based on the ability to process a specific class of mental states, namely, communicative intention. The present fMRI study aims to analyze whether intention processing in communication is affected by the expressive means through which a communicative intention is conveyed, that is, the linguistic or extralinguistic gestural means. Combined factorial and conjunction analyses were used to test two sets of predictions: first, that a common brain network is recruited for the comprehension of communicative intentions independently of the modality through which they are conveyed; second, that additional brain areas are specifically recruited depending on the communicative modality used, reflecting distinct sensorimotor gateways. Our results clearly showed that a common neural network is engaged in communicative intention processing independently of the modality used. This network includes the precuneus, the left and right posterior STS and TPJ, and the medial pFC. Additional brain areas outside those involved in intention processing are specifically engaged by the particular communicative modality, that is, a peri-sylvian language network for the linguistic modality and a sensorimotor network for the extralinguistic modality. Thus, common representation of communicative intention may be accessed by modality-specific gateways, which are distinct for linguistic versus extralinguistic expressive means. Taken together, our results indicate that the information acquired by different communicative modalities is equivalent from a mental processing standpoint, in particular, at the point at which the actor's communicative intention has to be reconstructed.

  17. Semantic Web-Driven LMS Architecture towards a Holistic Learning Process Model Focused on Personalization

    Science.gov (United States)

    Kerkiri, Tania

    2010-01-01

    A comprehensive presentation is here made on the modular architecture of an e-learning platform with a distinctive emphasis on content personalization, combining advantages from semantic web technology, collaborative filtering and recommendation systems. Modules of this architecture handle information about both the domain-specific didactic…

  18. Cellular Automata as a learning process in Architecture and Urban design

    DEFF Research Database (Denmark)

    Jensen, Mads Brath; Foged, Isak Worre

    2014-01-01

    . An architectural methodological response to this situation is presented through the development of a conceptual computational design system that allows these dynamics to unfold and to be observed for architectural design decision taking. Reflecting on the development and implementation of a cellular automata based...

  19. Aspects of Information Architecture involved in process mapping in Military Organizations under the semiotic perspective

    Directory of Open Access Journals (Sweden)

    Mac Amaral Cartaxo

    2016-04-01

    Full Text Available Introduction: The description of the processes to represent the activities in an organization has important call semiotic, It is the flowcharts of uses, management reports and the various forms of representation of the strategies used. The subsequent interpretation of the organization's employees involved in learning tasks and the symbols used to translate the meanings of management practices is essential role for the organization. Objective: The objective of this study was to identify evidence of conceptual and empirical, on aspects of information architecture involved in the mapping process carried out in military organizations under the semiotic perspective. Methodology: The research is characterized as qualitative, case study and the data collection technique was the semi-structured interview, applied to management advisors. Results: The main results indicate that management practices described with the use of pictorial symbols and different layouts have greater impact to explain the relevance of management practices and indicators. Conclusion: With regard to the semiotic appeal, it was found that the impact of a management report is significant due to the use of signs and layout that stimulate further reading by simplifying complex concepts in tables, diagrams summarizing lengthy descriptions.

  20. Architectural Theory and Graphical Criteria for Modelling Certain Late Gothic Projects by Hernan Ruiz "the Elder"

    Directory of Open Access Journals (Sweden)

    Antonio Luis Ampliato Briones

    2014-10-01

    Full Text Available This paper primarily reflects on the need to create graphical codes for producing images intended to communicate architecture. Each step of the drawing needs to be a deliberate process in which the proposed code highlights the relationship between architectural theory and graphic action. Our aim is not to draw the result of the architectural process but the design structure of the actual process; to draw as we design; to draw as we build. This analysis of the work of the Late Gothic architect Hernan Ruiz the Elder, from Cordoba, addresses two aspects: the historical and architectural investigation, and the graphical project for communication purposes.