Procedure and code for calculating black control rods taking into account epithermal absorption, code CAS-1

International Nuclear Information System (INIS)

Martinc, R.; Trivunac, N.; Zivkovic, Z.

1964-12-01

This report describes the computer code CAS-1, calculation method and procedure applied for calculating the black control rods taking into account the epithermal neutron absorption. Results obtained for supercell method applied for regular lattice reflected in the multiplication medium is part of this report in addition to the computer code manual

Reactor Systems Technology Division code development and configuration/quality control procedures

International Nuclear Information System (INIS)

Johnson, E.C.

1985-06-01

Procedures are prescribed for executing a code development task and implementing the resulting coding in an official version of a computer code. The responsibilities of the project manager, development staff members, and the Code Configuration/Quality Control Group are defined. Examples of forms, logs, computer job control language, and suggested outlines for reports associated with software production and implementation are included in Appendix A. 1 raf., 2 figs

Licensee Event Report sequence coding and search procedure workshop

International Nuclear Information System (INIS)

Cottrell, W.B.; Gallaher, R.B.

1981-01-01

Since mid-1980, the Office for Analysis and Evaluation of Operational Data (AEOD) of the Nuclear Regulatory Commission (NRC) has been developing procedures for the systematic review and analysis of Licensee Event Reports (LERs). These procedures generally address several areas of concern, including identification of significant trends and patterns, event sequence of occurrences, component failures, and system and plant effects. The AEOD and NSIC conducted a workshop on the new coding procedure at the American Museum of Science and Energy in Oak Ridge, TN, on November 24, 1980

Variable-Length Coding with Stop-Feedback for the Common-Message Broadcast Channel

DEFF Research Database (Denmark)

Trillingsgaard, Kasper Fløe; Yang, Wei; Durisi, Giuseppe

2016-01-01

This paper investigates the maximum coding rate over a K-user discrete memoryless broadcast channel for the scenario where a common message is transmitted using variable-length stop-feedback codes. Specifically, upon decoding the common message, each decoder sends a stop signal to the encoder...... of these bounds reveal that---contrary to the point-to-point case---the second-order term in the asymptotic expansion of the maximum coding rate decays inversely proportional to the square root of the average blocklength. This holds for certain nontrivial common-message broadcast channels, such as the binary......, which transmits continuously until it receives all K stop signals. We present nonasymptotic achievability and converse bounds for the maximum coding rate, which strengthen and generalize the bounds previously reported in Trillingsgaard et al. (2015) for the two-user case. An asymptotic analysis...

FISCAL PROCEDURE CODE AND REGULATIONS REGARDING TRANSACTIONS WITH AFFILIATES

Directory of Open Access Journals (Sweden)

Enea Constantin

2012-03-01

Full Text Available In determinate the transfer prices, The Romanian Procedural Fiscal Code stipulates (in the 79th article the obligation for those contributors who make transactions with related entities to draw up a record of transfer prices and to forward it to the tax administrations (at their request. Currently, the UE member states seek harmonization of tax legislation, with the aim of creating a common tax base. An important effect of the common base would be giving up the requirement for compiling a transfer price record, because the realization of income in a member state shall be associated with expenses in the state where the affiliate is located. In Romania, the guidelines on transfer pricing developed by the OECD have been assimilated into the domestic tax regulations (although our country is not yet a member of OECD, in order to harmonize these regulations in the Community. The main effect globalization has on transfer prices is increasing their complexity, as, in fact, economic globalization is reason for the existence of transfer pricing. With the increasing complexity of this area, states are forced either to improve legislation, or to create it, in order to ensure the growth of states income taxes.

Action and perception in literacy: A common-code for spelling and reading.

Science.gov (United States)

Houghton, George

2018-01-01

There is strong evidence that reading and spelling in alphabetical scripts depend on a shared representation (common-coding). However, computational models usually treat the two skills separately, producing a wide variety of proposals as to how the identity and position of letters is represented. This article treats reading and spelling in terms of the common-coding hypothesis for perception-action coupling. Empirical evidence for common representations in spelling-reading is reviewed. A novel version of the Start-End Competitive Queuing (SE-CQ) spelling model is introduced, and tested against the distribution of positional errors in Letter Position Dysgraphia, data from intralist intrusion errors in spelling to dictation, and dysgraphia because of nonperipheral neglect. It is argued that no other current model is equally capable of explaining this range of data. To pursue the common-coding hypothesis, the representation used in SE-CQ is applied, without modification, to the coding of letter identity and position for reading and lexical access, and a lexical matching rule for the representation is proposed (Start End Position Code model, SE-PC). Simulations show the model's compatibility with benchmark findings from form priming, its ability to account for positional effects in letter identification priming and the positional distribution of perseverative intrusion errors. The model supports the view that spelling and reading use a common orthographic description, providing a well-defined account of the major features of this representation. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Evaluating Coding Accuracy in General Surgery Residents' Accreditation Council for Graduate Medical Education Procedural Case Logs.

Science.gov (United States)

Balla, Fadi; Garwe, Tabitha; Motghare, Prasenjeet; Stamile, Tessa; Kim, Jennifer; Mahnken, Heidi; Lees, Jason

The Accreditation Council for Graduate Medical Education (ACGME) case log captures resident operative experience based on Current Procedural Terminology (CPT) codes and is used to track operative experience during residency. With increasing emphasis on resident operative experiences, coding is more important than ever. It has been shown in other surgical specialties at similar institutions that the residents' ACGME case log may not accurately reflect their operative experience. What barriers may influence this remains unclear. As the only objective measure of resident operative experience, an accurate case log is paramount in representing one's operative experience. This study aims to determine the accuracy of procedural coding by general surgical residents at a single institution. Data were collected from 2 consecutive graduating classes of surgical residents' ACGME case logs from 2008 to 2014. A total of 5799 entries from 7 residents were collected. The CPT codes entered by residents were compared to departmental billing records submitted by the attending surgeon for each procedure. Assigned CPT codes by institutional American Academy of Professional Coders certified abstract coders were considered the "gold standard." A total of 4356 (75.12%) of 5799 entries were identified in billing records. Excel 2010 and SAS 9.3 were used for analysis. In the event of multiple codes for the same patient, any match between resident codes and billing record codes was considered a "correct" entry. A 4-question survey was distributed to all current general surgical residents at our institution for feedback on coding habits, limitations to accurate coding, and opinions on ACGME case log representation of their operative experience. All 7 residents had a low percentage of correctly entered CPT codes. The overall accuracy proportion for all residents was 52.82% (range: 43.32%-60.07%). Only 1 resident showed significant improvement in accuracy during his/her training (p = 0

Design Procedure of Graphite Components by ASME HTR Codes

Energy Technology Data Exchange (ETDEWEB)

Kang, Ji-Ho; Jo, Chang Keun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

In this study, the ASME B and PV Code, Subsection HH, Subpart A, design procedure for graphite components of HTRs was reviewed and the differences from metal materials were remarked. The Korean VHTR has a prismatic core which is made of multiple graphite blocks, reflectors, and core supports. One of the design issues is the assessment of the structural integrity of the graphite components because the graphite is brittle and shows quite different behaviors from metals in high temperature environment. The American Society of Mechanical Engineers (ASME) issued the latest edition of the code for the high temperature reactors (HTR) in 2015. In this study, the ASME B and PV Code, Subsection HH, Subpart A, Graphite Materials was reviewed and the special features were remarked. Due the brittleness of graphites, the damage-tolerant design procedures different from the conventional metals were adopted based on semi-probabilistic approaches. The unique additional classification, SRC, is allotted to the graphite components and the full 3-D FEM or equivalent stress analysis method is required. In specific conditions, the oxidation and viscoelasticity analysis of material are required. The fatigue damage rule has not been established yet.

Design Procedure of Graphite Components by ASME HTR Codes

International Nuclear Information System (INIS)

Kang, Ji-Ho; Jo, Chang Keun

2016-01-01

In this study, the ASME B and PV Code, Subsection HH, Subpart A, design procedure for graphite components of HTRs was reviewed and the differences from metal materials were remarked. The Korean VHTR has a prismatic core which is made of multiple graphite blocks, reflectors, and core supports. One of the design issues is the assessment of the structural integrity of the graphite components because the graphite is brittle and shows quite different behaviors from metals in high temperature environment. The American Society of Mechanical Engineers (ASME) issued the latest edition of the code for the high temperature reactors (HTR) in 2015. In this study, the ASME B and PV Code, Subsection HH, Subpart A, Graphite Materials was reviewed and the special features were remarked. Due the brittleness of graphites, the damage-tolerant design procedures different from the conventional metals were adopted based on semi-probabilistic approaches. The unique additional classification, SRC, is allotted to the graphite components and the full 3-D FEM or equivalent stress analysis method is required. In specific conditions, the oxidation and viscoelasticity analysis of material are required. The fatigue damage rule has not been established yet

An approach for coupled-code multiphysics core simulations from a common input

International Nuclear Information System (INIS)

Schmidt, Rodney; Belcourt, Kenneth; Hooper, Russell; Pawlowski, Roger; Clarno, Kevin; Simunovic, Srdjan; Slattery, Stuart; Turner, John; Palmtag, Scott

2015-01-01

Highlights: • We describe an approach for coupled-code multiphysics reactor core simulations. • The approach can enable tight coupling of distinct physics codes with a common input. • Multi-code multiphysics coupling and parallel data transfer issues are explained. • The common input approach and how the information is processed is described. • Capabilities are demonstrated on an eigenvalue and power distribution calculation. - Abstract: This paper describes an approach for coupled-code multiphysics reactor core simulations that is being developed by the Virtual Environment for Reactor Applications (VERA) project in the Consortium for Advanced Simulation of Light-Water Reactors (CASL). In this approach a user creates a single problem description, called the “VERAIn” common input file, to define and setup the desired coupled-code reactor core simulation. A preprocessing step accepts the VERAIn file and generates a set of fully consistent input files for the different physics codes being coupled. The problem is then solved using a single-executable coupled-code simulation tool applicable to the problem, which is built using VERA infrastructure software tools and the set of physics codes required for the problem of interest. The approach is demonstrated by performing an eigenvalue and power distribution calculation of a typical three-dimensional 17 × 17 assembly with thermal–hydraulic and fuel temperature feedback. All neutronics aspects of the problem (cross-section calculation, neutron transport, power release) are solved using the Insilico code suite and are fully coupled to a thermal–hydraulic analysis calculated by the Cobra-TF (CTF) code. The single-executable coupled-code (Insilico-CTF) simulation tool is created using several VERA tools, including LIME (Lightweight Integrating Multiphysics Environment for coupling codes), DTK (Data Transfer Kit), Trilinos, and TriBITS. Parallel calculations are performed on the Titan supercomputer at Oak

Greater physician involvement improves coding outcomes in endobronchial ultrasound-guided transbronchial needle aspiration procedures.

Science.gov (United States)

Pillai, Anilkumar; Medford, Andrew R L

2013-01-01

Correct coding is essential for accurate reimbursement for clinical activity. Published data confirm that significant aberrations in coding occur, leading to considerable financial inaccuracies especially in interventional procedures such as endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA). Previous data reported a 15% coding error for EBUS-TBNA in a U.K. service. We hypothesised that greater physician involvement with coders would reduce EBUS-TBNA coding errors and financial disparity. The study was done as a prospective cohort study in the tertiary EBUS-TBNA service in Bristol. 165 consecutive patients between October 2009 and March 2012 underwent EBUS-TBNA for evaluation of unexplained mediastinal adenopathy on computed tomography. The chief coder was prospectively electronically informed of all procedures and cross-checked on a prospective database and by Trust Informatics. Cost and coding analysis was performed using the 2010-2011 tariffs. All 165 procedures (100%) were coded correctly as verified by Trust Informatics. This compares favourably with the 14.4% coding inaccuracy rate for EBUS-TBNA in a previous U.K. prospective cohort study [odds ratio 201.1 (1.1-357.5), p = 0.006]. Projected income loss was GBP 40,000 per year in the previous study, compared to a GBP 492,195 income here with no coding-attributable loss in revenue. Greater physician engagement with coders prevents coding errors and financial losses which can be significant especially in interventional specialties. The intervention can be as cheap, quick and simple as a prospective email to the coding team with cross-checks by Trust Informatics and against a procedural database. We suggest that all specialties should engage more with their coders using such a simple intervention to prevent revenue losses. Copyright © 2013 S. Karger AG, Basel.

Procedure for the use of the code SAGAPO-A and auxiliary programs

International Nuclear Information System (INIS)

Cevolani, S.

1981-06-01

This paper describes the procedure developed in order to optimize the use of the computer code SAGAPO-A for the thermo-fluid-dynamic analysis of gas cooled fuel element bundles. The first item of this procedure concerns the dynamic dimensioning of the code, having as target the optimization of the computer storage requirement. The second item concerns the graphical output: the results of the calculation are plotted together with the experimental results, in order to allow an immediate evaluation of the calculation. (orig.) [de

Analysis and application of ratcheting evaluation procedure of Japanese high temperature design code DDS

International Nuclear Information System (INIS)

Lee, H. Y.; Kim, J. B.; Lee, J. H.

2002-01-01

In this study, the evaluation procedure of Japanese DDS code which was recently developed to assess the progressive inelastic deformation occurring under repetition of secondary stresses was analyzed and the evaluation results according to DDS was compared those of the thermal ratchet structural test carried out by KAERI to analyze the conservativeness of the code. The existing high temperature codes of US ASME-NH and French RCC-MR suggest the limited ratcheting procedures for only the load cases of cyclic secondary stresses under primary stresses. So they are improper to apply to the actual ratcheting problem which can occur under cyclic secondary membrane stresses due to the movement of hot free surface for the pool type LMR. DDS provides explicitly an analysis procedure of ratcheting due to moving thermal gradients near hot free surface. A comparison study was carried out between the results by the design code of DDS and by the structural test to investigate the conservativeness of DDS code, which showed that the evaluation results by DDS were in good agreement with those of the structural test

From Novice to Expert: Problem Solving in ICD-10-PCS Procedural Coding

Science.gov (United States)

Rousse, Justin Thomas

2013-01-01

The benefits of converting to ICD-10-CM/PCS have been well documented in recent years. One of the greatest challenges in the conversion, however, is how to train the workforce in the code sets. The International Classification of Diseases, Tenth Revision, Procedure Coding System (ICD-10-PCS) has been described as a language requiring higher-level reasoning skills because of the system's increased granularity. Training and problem-solving strategies required for correct procedural coding are unclear. The objective of this article is to propose that the acquisition of rule-based logic will need to be augmented with self-evaluative and critical thinking. Awareness of how this process works is helpful for established coders as well as for a new generation of coders who will master the complexities of the system. PMID:23861674

Correct coding for laboratory procedures during assisted reproductive technology cycles.

Science.gov (United States)

2016-04-01

This document provides updated coding information for services related to assisted reproductive technology procedures. This document replaces the 2012 ASRM document of the same name. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Software quality assurance procedures for radioactive waste risk assessment codes

International Nuclear Information System (INIS)

Hill, I.; Mayer, J.

1990-01-01

This support study for the evaluation of the safety of geological disposal systems is aimed at identifying the requirements for software quality assurance procedures for radioactive waste risk assessment codes, and to recommend appropriate procedures. The research covers: (i) the analysis of existing procedures and definition of requirements; (ii) a case study of the use of some existing procedures; (iii) the definition and the implementation of procedures. The report is supported by appendices that give more detail on the procedures recommended. It is intended to provide ideas on the steps that should be taken to ensure the quality of the programs used for assessment of the safety case for radioactive waste repositories, and does not represent the introduction of wholly new ideas or techniques. The emphasis throughout is on procedures that will be easily implemented, rather than on the fully rigorous procedures that are required for some application areas. The study has concentrated on measures that will increase the confidence in repository performance assessments among the wider scientific/engineering community, and the lay public

Impacts of the New civil Procedure Code on Admissibility of Resources

Directory of Open Access Journals (Sweden)

Alexandre Máximo Oliveira

2016-10-01

Full Text Available The new Civil Procedure Code introduces several changes in the assumptions and judgment of admissibility of appeals, which directly influenced the conduct of current and future processes. This paper seeks to anticipate some of the difficulties, theoretical and practical, that legal professionals found in the application of the procedures established in the new code, bringing weightings should be considered for understanding the science base sought by the legislature. The low number of papers or literature on the subject highlights the need to better study the issue, which is related to the constitutional promise of reasonable duration of the process. In preparing the study, to achieve the proposed objectives, we used the theoretical research concerning the issue, consisting of the content analysis of doctrinal texts and legal norms.

Accuracy of clinical coding for procedures in oral and maxillofacial surgery.

Science.gov (United States)

Khurram, S A; Warner, C; Henry, A M; Kumar, A; Mohammed-Ali, R I

2016-10-01

Clinical coding has important financial implications, and discrepancies in the assigned codes can directly affect the funding of a department and hospital. Over the last few years, numerous oversights have been noticed in the coding of oral and maxillofacial (OMF) procedures. To establish the accuracy and completeness of coding, we retrospectively analysed the records of patients during two time periods: March to May 2009 (324 patients), and January to March 2014 (200 patients). Two investigators independently collected and analysed the data to ensure accuracy and remove bias. A large proportion of operations were not assigned all the relevant codes, and only 32% - 33% were correct in both cycles. To our knowledge, this is the first reported audit of clinical coding in OMFS, and it highlights serious shortcomings that have substantial financial implications. Better input by the surgical team and improved communication between the surgical and coding departments will improve accuracy. Copyright © 2016 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Procedures of ASME code case N-201 for KALIMER. Reactor internal structures

International Nuclear Information System (INIS)

Koo, Gyeong Hoi; Yoo, B.

2001-02-01

The main objective of this report is to describe the design procedure of ASME Boiler and Pressure Vessel Code, Code Case N-201-4, which is an elevated temperature structural design code of the Nuclear reactor internal structures, checking the criteria of stress limit, accumulated inelastic strain and deformation, creep-fatigue damage, and buckling limit. As one of examples, the creep-fatigue damage evaluations are carried out for the KALIMER reactor internal structures of baffle annulus. This report is expected to be very useful in evaluating the structural integrity of the liquid metal reactor operating under an elevated temperature

Analisys of Book i of the New Code of Civil Procedure: A Reflex of the Phenomenon of Constitucionalization of Civil Procedure

Directory of Open Access Journals (Sweden)

Yvete Flavio da Costa

2016-10-01

Full Text Available This article aims to analyze the Book I of the New Code of Civil Procedure, called "The civil procedural rules" linking it to the constitutionalization process that civil process has going by after the enactment of the 1988 Federal Constitution. This is because, since its enactment, the Democratic Constitution became maximum vector of the entire legal system, so that all laws must  comply  with  its  principles  and  rules,  under  penalty  of  being  considered unconstitutional. The previous Code, enacted in 1973, before the current Constitution, had no such concern because at that time, the maximum vector law was the Civil Code of 1916. So in that text, there was not some of the fundamental assumptions for valid and regular development of civil procedure, such as contradictory. With that in mind, the legislator brought in this chapter, a kind of law of introduction to civil procedure rules, regulating the application of the process in time and space, and also brings the constitutional principles that were not explicitly present in the encoded text before.. The present article is justified by the need to carry out a deeper study of the constitution of civil procedure, with a view to the subject nowadays. In order to enable the thematic deepening of the subject, it was employed the logical deductive and inductive methods logical, since the research was based on deductive research of new legislation.

RELEVANT ISSUES CONCERNING THE RELOCATION OF CIVIL PROCEEDINGS UNDER THE NEW CODE OF CIVIL PROCEDURE (NCPC

Directory of Open Access Journals (Sweden)

Andrei Costin GRIMBERG

2015-07-01

Full Text Available The change of the new code of civil procedure and obvious the entry of the new provisions at 15th February 2013, has been thought with the hope to accelerate the procedures related to judgement with a noticeable simplification of procedures, all designed with the aim of unifying the case law and to lower the costs generated by lawsuits , costs both borne by the State as well by citizens involved the cases in court . Thus, the implementation of the New Code of Civil Procedure, desired the compliance right to a fair trial within a optimal time and predictable by the court, by judging the trial in a speedy way , avoiding unjustified delays of the pending cases and to the new petitions introduced, by excessive and unjustified delays often. By the noticeable changes that occurred following the entry into force of the new Code of Civil Procedure, it identify and amend the provisions regarding requests for displacement, in terms of the grounds on which it may formulate the petition of displacement and the court competent to hear such an application.

Licensing procedure, nuclear codes and standards in the Federal Republic of Germany

International Nuclear Information System (INIS)

Schultheiss, G.F.

1980-01-01

The present paper deals with legal background of licensing in nuclear technology and atomic energy use, licensing procedures for nuclear power plants and with codes, standards and guidelines in the Federal Republic of Germany. (orig./RW)

Association of code status discussion with invasive procedures among advanced-stage cancer and noncancer patients

Directory of Open Access Journals (Sweden)

Sasaki A

2017-07-01

Full Text Available Akinori Sasaki,1 Eiji Hiraoka,1 Yosuke Homma,2 Osamu Takahashi,3 Yasuhiro Norisue,4 Koji Kawai,5 Shigeki Fujitani4 1Department of Internal Medicine, 2Department of Emergency Medicine, Tokyo Bay Urayasu Ichikawa Medical Center, Urayasu City, Chiba, 3Department of Internal Medicine, St. Luke’s International Hospital, Chuo-ku, Tokyo, 4Department of Critical Care Medicine, Tokyo Bay Urayasu Ichikawa Medical Center, Urayasu City, Chiba, 5Department of Gastroenterology, Ito Municipal Hospital, Ito City, Shizuoka, Japan Background: Code status discussion is associated with a decrease in invasive procedures among terminally ill cancer patients. We investigated the association between code status discussion on admission and incidence of invasive procedures, cardiopulmonary resuscitation (CPR, and opioid use among inpatients with advanced stages of cancer and noncancer diseases. Methods: We performed a retrospective cohort study in a single center, Ito Municipal Hospital, Japan. Participants were patients who were admitted to the Department of Internal Medicine between October 1, 2013 and August 30, 2015, with advanced-stage cancer and noncancer. We collected demographic data and inquired the presence or absence of code status discussion within 24 hours of admission and whether invasive procedures, including central venous catheter placement, intubation with mechanical ventilation, and CPR for cardiac arrest, and opioid treatment were performed. We investigated the factors associated with CPR events by using multivariate logistic regression analysis. Results: Among the total 232 patients, code status was discussed with 115 patients on admission, of which 114 (99.1% patients had do-not-resuscitate (DNR orders. The code status was not discussed with the remaining 117 patients on admission, of which 69 (59% patients had subsequent code status discussion with resultant DNR orders. Code status discussion on admission decreased the incidence of central venous

3D-TRANS-2003, Workshop on Common Tools and Interfaces for Radiation Transport Codes

International Nuclear Information System (INIS)

2004-01-01

Description: Contents proceedings of Workshop on Common Tools and Interfaces for Deterministic Radiation Transport, for Monte Carlo and Hybrid Codes with a proposal to develop the following: GERALD - A General Environment for Radiation Analysis and Design. GERALD intends to create a unifying software environment where the user can define, solve and analyse a nuclear radiation transport problem using available numerical tools seamlessly. This environment will serve many purposes: teaching, research, industrial needs. It will also help to preserve the existing analytical and numerical knowledge base. This could represent a significant step towards solving the legacy problem. This activity should contribute to attracting young engineers to nuclear science and engineering and contribute to competence and knowledge preservation and management. This proposal was made at the on Workshop on C ommon Tools and Interfaces for Deterministic Radiation Transport, for Monte Carlo and Hybrid Codes , held from 25-26 September 2003 in connection with the conference SNA-2003. A first success with the development of such tools was achieved with the BOT3P2.0 and 3.0 codes providing an easy procedure and mechanism for defining and displaying 3D geometries and materials both in the form of refineable meshes for deterministic codes or Monte Carlo geometries consistent with deterministic models. Advanced SUSD: Improved tools for Sensitivity/Uncertainty Analysis. The development of tools for the analysis and estimation of sensitivities and uncertainties in calculations, or their propagation through complex computational schemes, in the field of neutronics, thermal hydraulics and also thermo-mechanics is of increasing importance for research and engineering applications. These tools allow establishing better margins for engineering designs and for the safe operation of nuclear facilities. Such tools are not sufficiently developed, but their need is increasingly evident in many activities

THE PRINCIPLE OF GOOD FAITH IN THE BRAZILIAN LEGAL ORDER: A BRIEF STUDY OF THE NEW CIVIL PROCEDURE CODE.

Directory of Open Access Journals (Sweden)

Elias Marques de Medeiros Neto

2017-05-01

Full Text Available The present study has the scope to analyze and reflect the relevant legal aspects of the good faith principle in the Brazilian legal order, above all, its forecast in the new Brazilian Civil Procedure Code. Among the various innovations presented by the new Civil Procedure Code, a well-known and little used in the Brazilian legal order gets a real highlight in the Civil Procedure’s field: the good faith principle. The consecration of such an institute in the new Brazilian Civil Procedure Code, which came to be denominated by the doctrine as the procedural good faith’s principle, arise from the demand enlargement of the good faith in the private law and public law. Law nº 13.105 of 2015 that instituted a new Civil Procedure Code, stablish that the subjects of the process who participate in it in any way, pass their behaviors according to good faith, according to the article 5 of the 2015’s Brazilian Civil Procedure Code. Such principle, which makes up a norm of conduct is aimed at repelling the procedural conducts derived from bad faith by considering them illicit. In addition, the general clause of the objective procedural good faith requires that the subjects of a proceeding do not present a corrupt conduct of bad-faith. Thereby, aiming to evaluate the legal aspects of the procedural good faith in the Brazilian legal order, at a first moment, is necessary to understand the evolution and fundamental contours of good faith in civil law, with an emphasis on the study of existing good faith species and the understanding of objective good faith as a general clause. Next, it is necessary the study of the objective good faith principle’s constitutional foundation and its procedural bias. Finally, the principle of procedural good faith is materialized in the new Brazilian Civil Procedure Code. In order to appreciate the above, the deductive method and bibliographical and legislative research are used in the present work.

Comparing the coding of complications in Queensland and Victorian admitted patient data.

Science.gov (United States)

Michel, Jude L; Cheng, Diana; Jackson, Terri J

2011-08-01

To examine differences between Queensland and Victorian coding of hospital-acquired conditions and suggest ways to improve the usefulness of these data in the monitoring of patient safety events. Secondary analysis of admitted patient episode data collected in Queensland and Victoria. Comparison of depth of coding, and patterns in the coding of ten commonly coded complications of five elective procedures. Comparison of the mean complication codes assigned per episode revealed Victoria assigns more valid codes than Queensland for all procedures, with the difference between the states being significantly different in all cases. The proportion of the codes flagged as complications was consistently lower for Queensland when comparing 10 common complications for each of the five selected elective procedures. The estimated complication rates for the five procedures showed Victoria to have an apparently higher complication rate than Queensland for 35 of the 50 complications examined. Our findings demonstrate that the coding of complications is more comprehensive in Victoria than in Queensland. It is known that inconsistencies exist between states in routine hospital data quality. Comparative use of patient safety indicators should be viewed with caution until standards are improved across Australia. More exploration of data quality issues is needed to identify areas for improvement.

DOSE COEFFICIENTS FOR LIVER CHEMOEMBOLISATION PROCEDURES USING MONTE CARLO CODE.

Science.gov (United States)

Karavasilis, E; Dimitriadis, A; Gonis, H; Pappas, P; Georgiou, E; Yakoumakis, E

2016-12-01

The aim of the present study is the estimation of radiation burden during liver chemoembolisation procedures. Organ dose and effective dose conversion factors, normalised to dose-area product (DAP), were estimated for chemoembolisation procedures using a Monte Carlo transport code in conjunction with an adult mathematical phantom. Exposure data from 32 patients were used to determine the exposure projections for the simulations. Equivalent organ (H T ) and effective (E) doses were estimated using individual DAP values. The organs receiving the highest amount of doses during these exams were lumbar spine, liver and kidneys. The mean effective dose conversion factor was 1.4 Sv Gy -1 m -2 Dose conversion factors can be useful for patient-specific radiation burden during chemoembolisation procedures. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Evaluating the performance of two neutron spectrum unfolding codes based on iterative procedures and artificial neural networks

International Nuclear Information System (INIS)

Ortiz-Rodríguez, J. M.; Reyes Alfaro, A.; Reyes Haro, A.; Solís Sánches, L. O.; Miranda, R. Castañeda; Cervantes Viramontes, J. M.; Vega-Carrillo, H. R.

2013-01-01

In this work the performance of two neutron spectrum unfolding codes based on iterative procedures and artificial neural networks is evaluated. The first one code based on traditional iterative procedures and called Neutron spectrometry and dosimetry from the Universidad Autonoma de Zacatecas (NSDUAZ) use the SPUNIT iterative algorithm and was designed to unfold neutron spectrum and calculate 15 dosimetric quantities and 7 IAEA survey meters. The main feature of this code is the automated selection of the initial guess spectrum trough a compendium of neutron spectrum compiled by the IAEA. The second one code known as Neutron spectrometry and dosimetry with artificial neural networks (NDSann) is a code designed using neural nets technology. The artificial intelligence approach of neural net does not solve mathematical equations. By using the knowledge stored at synaptic weights on a neural net properly trained, the code is capable to unfold neutron spectrum and to simultaneously calculate 15 dosimetric quantities, needing as entrance data, only the rate counts measured with a Bonner spheres system. Similarities of both NSDUAZ and NSDann codes are: they follow the same easy and intuitive user's philosophy and were designed in a graphical interface under the LabVIEW programming environment. Both codes unfold the neutron spectrum expressed in 60 energy bins, calculate 15 dosimetric quantities and generate a full report in HTML format. Differences of these codes are: NSDUAZ code was designed using classical iterative approaches and needs an initial guess spectrum in order to initiate the iterative procedure. In NSDUAZ, a programming routine was designed to calculate 7 IAEA instrument survey meters using the fluence-dose conversion coefficients. NSDann code use artificial neural networks for solving the ill-conditioned equation system of neutron spectrometry problem through synaptic weights of a properly trained neural network. Contrary to iterative procedures, in neural

Evaluating the performance of two neutron spectrum unfolding codes based on iterative procedures and artificial neural networks

Science.gov (United States)

Ortiz-Rodríguez, J. M.; Reyes Alfaro, A.; Reyes Haro, A.; Solís Sánches, L. O.; Miranda, R. Castañeda; Cervantes Viramontes, J. M.; Vega-Carrillo, H. R.

2013-07-01

In this work the performance of two neutron spectrum unfolding codes based on iterative procedures and artificial neural networks is evaluated. The first one code based on traditional iterative procedures and called Neutron spectrometry and dosimetry from the Universidad Autonoma de Zacatecas (NSDUAZ) use the SPUNIT iterative algorithm and was designed to unfold neutron spectrum and calculate 15 dosimetric quantities and 7 IAEA survey meters. The main feature of this code is the automated selection of the initial guess spectrum trough a compendium of neutron spectrum compiled by the IAEA. The second one code known as Neutron spectrometry and dosimetry with artificial neural networks (NDSann) is a code designed using neural nets technology. The artificial intelligence approach of neural net does not solve mathematical equations. By using the knowledge stored at synaptic weights on a neural net properly trained, the code is capable to unfold neutron spectrum and to simultaneously calculate 15 dosimetric quantities, needing as entrance data, only the rate counts measured with a Bonner spheres system. Similarities of both NSDUAZ and NSDann codes are: they follow the same easy and intuitive user's philosophy and were designed in a graphical interface under the LabVIEW programming environment. Both codes unfold the neutron spectrum expressed in 60 energy bins, calculate 15 dosimetric quantities and generate a full report in HTML format. Differences of these codes are: NSDUAZ code was designed using classical iterative approaches and needs an initial guess spectrum in order to initiate the iterative procedure. In NSDUAZ, a programming routine was designed to calculate 7 IAEA instrument survey meters using the fluence-dose conversion coefficients. NSDann code use artificial neural networks for solving the ill-conditioned equation system of neutron spectrometry problem through synaptic weights of a properly trained neural network. Contrary to iterative procedures, in neural

Evaluating the performance of two neutron spectrum unfolding codes based on iterative procedures and artificial neural networks

Energy Technology Data Exchange (ETDEWEB)

Ortiz-Rodriguez, J. M.; Reyes Alfaro, A.; Reyes Haro, A.; Solis Sanches, L. O.; Miranda, R. Castaneda; Cervantes Viramontes, J. M. [Universidad Autonoma de Zacatecas, Unidad Academica de Ingenieria Electrica. Av. Ramon Lopez Velarde 801. Col. Centro Zacatecas, Zac (Mexico); Vega-Carrillo, H. R. [Universidad Autonoma de Zacatecas, Unidad Academica de Ingenieria Electrica. Av. Ramon Lopez Velarde 801. Col. Centro Zacatecas, Zac., Mexico. and Unidad Academica de Estudios Nucleares. C. Cip (Mexico)

2013-07-03

In this work the performance of two neutron spectrum unfolding codes based on iterative procedures and artificial neural networks is evaluated. The first one code based on traditional iterative procedures and called Neutron spectrometry and dosimetry from the Universidad Autonoma de Zacatecas (NSDUAZ) use the SPUNIT iterative algorithm and was designed to unfold neutron spectrum and calculate 15 dosimetric quantities and 7 IAEA survey meters. The main feature of this code is the automated selection of the initial guess spectrum trough a compendium of neutron spectrum compiled by the IAEA. The second one code known as Neutron spectrometry and dosimetry with artificial neural networks (NDSann) is a code designed using neural nets technology. The artificial intelligence approach of neural net does not solve mathematical equations. By using the knowledge stored at synaptic weights on a neural net properly trained, the code is capable to unfold neutron spectrum and to simultaneously calculate 15 dosimetric quantities, needing as entrance data, only the rate counts measured with a Bonner spheres system. Similarities of both NSDUAZ and NSDann codes are: they follow the same easy and intuitive user's philosophy and were designed in a graphical interface under the LabVIEW programming environment. Both codes unfold the neutron spectrum expressed in 60 energy bins, calculate 15 dosimetric quantities and generate a full report in HTML format. Differences of these codes are: NSDUAZ code was designed using classical iterative approaches and needs an initial guess spectrum in order to initiate the iterative procedure. In NSDUAZ, a programming routine was designed to calculate 7 IAEA instrument survey meters using the fluence-dose conversion coefficients. NSDann code use artificial neural networks for solving the ill-conditioned equation system of neutron spectrometry problem through synaptic weights of a properly trained neural network. Contrary to iterative procedures, in

Galen-In-Use: using artificial intelligence terminology tools to improve the linguistic coherence of a national coding system for surgical procedures.

Science.gov (United States)

Rodrigues, J M; Trombert-Paviot, B; Baud, R; Wagner, J; Meusnier-Carriot, F

1998-01-01

GALEN has developed a language independent common reference model based on a medically oriented ontology and practical tools and techniques for managing healthcare terminology including natural language processing. GALEN-IN-USE is the current phase which applied the modelling and the tools to the development or the updating of coding systems for surgical procedures in different national coding centers co-operating within the European Federation of Coding Centre (EFCC) to create a language independent knowledge repository for multicultural Europe. We used an integrated set of artificial intelligence terminology tools named CLAssification Manager workbench to process French professional medical language rubrics into intermediate dissections and to the Grail reference ontology model representation. From this language independent concept model representation we generate controlled French natural language. The French national coding centre is then able to retrieve the initial professional rubrics with different categories of concepts, to compare the professional language proposed by expert clinicians to the French generated controlled vocabulary and to finalize the linguistic labels of the coding system in relation with the meanings of the conceptual system structure.

Identifying complications of interventional procedures from UK routine healthcare databases: a systematic search for methods using clinical codes.

Science.gov (United States)

Keltie, Kim; Cole, Helen; Arber, Mick; Patrick, Hannah; Powell, John; Campbell, Bruce; Sims, Andrew

2014-11-28

Several authors have developed and applied methods to routine data sets to identify the nature and rate of complications following interventional procedures. But, to date, there has been no systematic search for such methods. The objective of this article was to find, classify and appraise published methods, based on analysis of clinical codes, which used routine healthcare databases in a United Kingdom setting to identify complications resulting from interventional procedures. A literature search strategy was developed to identify published studies that referred, in the title or abstract, to the name or acronym of a known routine healthcare database and to complications from procedures or devices. The following data sources were searched in February and March 2013: Cochrane Methods Register, Conference Proceedings Citation Index - Science, Econlit, EMBASE, Health Management Information Consortium, Health Technology Assessment database, MathSciNet, MEDLINE, MEDLINE in-process, OAIster, OpenGrey, Science Citation Index Expanded and ScienceDirect. Of the eligible papers, those which reported methods using clinical coding were classified and summarised in tabular form using the following headings: routine healthcare database; medical speciality; method for identifying complications; length of follow-up; method of recording comorbidity. The benefits and limitations of each approach were assessed. From 3688 papers identified from the literature search, 44 reported the use of clinical codes to identify complications, from which four distinct methods were identified: 1) searching the index admission for specified clinical codes, 2) searching a sequence of admissions for specified clinical codes, 3) searching for specified clinical codes for complications from procedures and devices within the International Classification of Diseases 10th revision (ICD-10) coding scheme which is the methodology recommended by NHS Classification Service, and 4) conducting manual clinical

Thermal-Hydraulic System Codes in Nulcear Reactor Safety and Qualification Procedures

Directory of Open Access Journals (Sweden)

Alessandro Petruzzi

2008-01-01

Full Text Available In the last four decades, large efforts have been undertaken to provide reliable thermal-hydraulic system codes for the analyses of transients and accidents in nuclear power plants. Whereas the first system codes, developed at the beginning of the 1970s, utilized the homogenous equilibrium model with three balance equations to describe the two-phase flow, nowadays the more advanced system codes are based on the so-called “two-fluid model” with separation of the water and vapor phases, resulting in systems with at least six balance equations. The wide experimental campaign, constituted by the integral and separate effect tests, conducted under the umbrella of the OECD/CSNI was at the basis of the development and validation of the thermal-hydraulic system codes by which they have reached the present high degree of maturity. However, notwithstanding the huge amounts of financial and human resources invested, the results predicted by the code are still affected by errors whose origins can be attributed to several reasons as model deficiencies, approximations in the numerical solution, nodalization effects, and imperfect knowledge of boundary and initial conditions. In this context, the existence of qualified procedures for a consistent application of qualified thermal-hydraulic system code is necessary and implies the drawing up of specific criteria through which the code-user, the nodalization, and finally the transient results are qualified.

Code of Conduct on Biosecurity for Biological Resource Centres: procedural implementation.

Science.gov (United States)

Rohde, Christine; Smith, David; Martin, Dunja; Fritze, Dagmar; Stalpers, Joost

2013-07-01

A globally applicable code of conduct specifically dedicated to biosecurity has been developed together with guidance for its procedural implementation. This is to address the regulations governing potential dual-use of biological materials, associated information and technologies, and reduce the potential for their malicious use. Scientists researching and exchanging micro-organisms have a responsibility to prevent misuse of the inherently dangerous ones, that is, those possessing characters such as pathogenicity or toxin production. The code of conduct presented here is based on best practice principles for scientists and their institutions working with biological resources with a specific focus on micro-organisms. It aims to raise awareness of regulatory needs and to protect researchers, their facilities and stakeholders. It reflects global activities in this area in response to legislation such as that in the USA, the PATRIOT Act of 2001, Uniting and Strengthening America by Providing Appropriate Tools Required to Intercept and Obstruct Terrorism Act of 2001; the Anti-Terrorism Crime and Security Act 2001 and subsequent amendments in the UK; the EU Dual-Use Regulation; and the recommendations of the Organization for Economic Co-operation and Development (OECD), under their Biological Resource Centre (BRC) Initiative at the beginning of the millennium (OECD, 2001). Two project consortia with international partners came together with experts in the field to draw up a Code of Conduct on Biosecurity for BRCs to ensure that culture collections and microbiologists in general worked in a way that met the requirements of such legislation. A BRC is the modern day culture collection that adds value to its holdings and implements common best practice in the collection and supply of strains for research and development. This code of conduct specifically addresses the work of public service culture collections and describes the issues of importance and the controls or

All Equal: Article 198 of the Objective of Civil Procedure Code

Directory of Open Access Journals (Sweden)

Luciane Mara Correa Gomes

2016-10-01

Full Text Available The implementation of the electronic process in Brazil was made to be a way to minimize the slowness in dealing with cases. Created the first barrier of inequality, because there was not the adequacy of the system to people with special needs. The Civil Procedure Code calls for equal treatment by imposing the Judiciary duty purpose of access, spreading the installation charge of treatment rooms with technical support and personnel to jurisdictional, disabled and elderly. In the absence of physical space, allows the law to practice through physical, creating imbalance in parity procedural weapons.

ANTINOMIES BETWEEN CIVIL CODE AND NEW CIVIL PROCEDURE CODE: ANALYSIS OF ARTICLE 221 OF THE CC/2002 AND ARTICLE 784 OF THE RULE 13.105/2015

Directory of Open Access Journals (Sweden)

Andrea Cristina Zanetti

2016-06-01

Full Text Available Article 221 of the Brazilian Civil Code defines the form of evidence to provethe obligations between contracting parties, asserting that just the existence of contract signed by the parties, which are in the free disposal of theirs property, it´s enough to be proven the obligatory relationship between them, independent the adjusted value of the obligation. As noted, the Brazilian Civil Code of 2002 no longer requires that the contracts need to be signed by two witnesses to attest their existence and binding force between the parties. However, Article 784, item III, of Rule n. 13.105/15 (new Civil Procedure Code which will come into force in March 2016, makes it clear that it will only be considered extrajudicial title of the executionaction the particular document signed by the debtor and two (2 witnesses, keeping the expression of Art.585, item II of the CPC/1973. In this sense, one can say that art. 784 of Rule No. 13.105/15 would be contradicting the terms of Art. 221 of the Civil Code/2002? After all,the new Civil Procedure Code requires the presence of two witnesses in private documents (contracts in general. We would be facing an antinomy? This academic paperanalyzesthese issues, contributing to the study of antinomy between the rules of Civil Code and the new Civil Procedure Code, without conclude all the questions related a potential antinomies between these two legislations. These are issues that need tobe carefullyreviewedby the jurist, in searches, for the future solutions.

Defects in railway bridges and procedures for maintenance:UIC Code 778-4R

OpenAIRE

Elfgren, Lennart

2009-01-01

This leaflet gives guidelines and recommendations covering procedures for the maintenance and strengthening of railway bridges. Arrangements and methods for inspection are presented; defects are described; methods for monitoring and assessment are given; and procedures for maintenance, repair, strengthening and renewal are defined.The purpose is to update the 1989 edition of UIC Code 778-4R and to implement results from a European Integrated Research Project (2003-2007) on “Sustainable Bridge...

Content Analysis Coding Schemes for Online Asynchronous Discussion

Science.gov (United States)

Weltzer-Ward, Lisa

2011-01-01

Purpose: Researchers commonly utilize coding-based analysis of classroom asynchronous discussion contributions as part of studies of online learning and instruction. However, this analysis is inconsistent from study to study with over 50 coding schemes and procedures applied in the last eight years. The aim of this article is to provide a basis…

Observational Coding Systems of Parent-Child Interactions During Painful Procedures: A Systematic Review.

Science.gov (United States)

Bai, Jinbing; Swanson, Kristen M; Santacroce, Sheila J

2018-01-01

Parent interactions with their child can influence the child's pain and distress during painful procedures. Reliable and valid interaction analysis systems (IASs) are valuable tools for capturing these interactions. The extent to which IASs are used in observational research of parent-child interactions is unknown in pediatric populations. To identify and evaluate studies that focus on assessing psychometric properties of initial iterations/publications of observational coding systems of parent-child interactions during painful procedures. To identify and evaluate studies that focus on assessing psychometric properties of initial iterations/publications of observational coding systems of parent-child interactions during painful procedures. Computerized databases searched included PubMed, CINAHL, PsycINFO, Health and Psychosocial Instruments, and Scopus. Timeframes covered from inception of the database to January 2017. Studies were included if they reported use or psychometrics of parent-child IASs. First assessment was whether the parent-child IASs were theory-based; next, using the Society of Pediatric Psychology Assessment Task Force criteria IASs were assigned to one of three categories: well-established, approaching well-established, or promising. A total of 795 studies were identified through computerized searches. Eighteen studies were ultimately determined to be eligible for inclusion in the review and 17 parent-child IASs were identified from these 18 studies. Among the 17 coding systems, 14 were suitable for use in children age 3 years or more; two were theory-based; and 11 included verbal and nonverbal parent behaviors that promoted either child coping or child distress. Four IASs were assessed as well-established; seven approached well-established; and six were promising. Findings indicate a need for the development of theory-based parent-child IASs that consider both verbal and nonverbal parent behaviors during painful procedures. Findings also

Using Procedure Codes to Define Radiation Toxicity in Administrative Data: The Devil is in the Details.

Science.gov (United States)

Meyer, Anne-Marie; Kuo, Tzy-Mey; Chang, YunKyung; Carpenter, William R; Chen, Ronald C; Sturmer, Til

2017-05-01

Systematic coding systems are used to define clinically meaningful outcomes when leveraging administrative claims data for research. How and when these codes are applied within a research study can have implications for the study validity and their specificity can vary significantly depending on treatment received. Data are from the Surveillance, Epidemiology, and End Results-Medicare linked dataset. We use propensity score methods in a retrospective cohort of prostate cancer patients first examined in a recently published radiation oncology comparative effectiveness study. With the narrowly defined outcome definition, the toxicity event outcome rate ratio was 0.88 per 100 person-years (95% confidence interval, 0.71-1.08). With the broadly defined outcome, the rate ratio was comparable, with 0.89 per 100 person-years (95% confidence interval, 0.76-1.04), although individual event rates were doubled. Some evidence of surveillance bias was suggested by a higher rate of endoscopic procedures the first year of follow-up in patients who received proton therapy compared with those receiving intensity-modulated radiation treatment (11.15 vs. 8.90, respectively). This study demonstrates the risk of introducing bias through subjective application of procedure codes. Careful consideration is required when using procedure codes to define outcomes in administrative data.

Jovan Hadžić's civil procedure code draft (1845

Directory of Open Access Journals (Sweden)

Stanković Uroš

2013-01-01

Full Text Available The article sheds light on civil procedure code draft prepared by renown Serbian lawmaker Jovan Hadžić in 1845. Contrarily to Hadžić's work on producing civil code, his efforts to write civil procedure code are to a large extent obscure. Original text of the draft has not been found. Therefore, one is imposed to reconstruct it with the aid of auxiliary sources, among which the record kept by the commission tasked with revision of the draft, has prevailing significance. The author made an attempt to determine the structure of the draft, as well as the contents of its provisions as accurately as possible, wherein the remarks that the Commission had made were of most assistance. Hadžić consigned his draft to the Prince Aleksandar Karađorđević on August 4th 1845. The Draft consisted of introduction and three parts. The introduction comprised of general provisions. Therein was stipulated principle of trial by written declaration, determined five kinds of courts before which civil procedure should occur and established vacatio legis. The first and concviningly largest part of the Draft was most likely entitled 'On principal litigations and litigation evidence' ('O parnicama glavnima i parničnim dokazatelstvima'. It included diverse rules, such as proceedings before peace courts, proceedings before district courts, ordinary course of litigation (i. e. rules in terms of filing a complaint, scheduling of hearings, subpoenas delivery, procurement of evidence, trial, bankruptcy proceedings, forms of evidence, presentation of evidence and deliberation of judgment, appellate procedure, new trial and enforcement procedure. The third part subsumed the title named 'likvidacija' (literally 'liquidation', whose contents is undeterminable on the basis of existing text of the draft, resolution of bankruptcy proceedings via settlement, resolution of regular litigations via settlement, title named 'on special proceedings and advantages' ('o osobenom

Keeping a common bawdy house becomes a "serious offence" under Criminal Code.

Science.gov (United States)

2010-10-01

New federal regulations targeting organized crime will make keeping a common bawdy house a "serious offence" under the Criminal Code. Sex work advocates reacted by calling the measure a serious step back that will undermine the protection of sex workers' human rights, safety, dignity and health.

Hospital discharge diagnostic and procedure codes for upper gastro-intestinal cancer: how accurate are they?

Directory of Open Access Journals (Sweden)

Stavrou Efty

2012-09-01

Full Text Available Abstract Background Population-level health administrative datasets such as hospital discharge data are used increasingly to evaluate health services and outcomes of care. However information about the accuracy of Australian discharge data in identifying cancer, associated procedures and comorbidity is limited. The Admitted Patients Data Collection (APDC is a census of inpatient hospital discharges in the state of New South Wales (NSW. Our aim was to assess the accuracy of the APDC in identifying upper gastro-intestinal (upper GI cancer cases, procedures for associated curative resection and comorbidities at the time of admission compared to data abstracted from medical records (the ‘gold standard’. Methods We reviewed the medical records of 240 patients with an incident upper GI cancer diagnosis derived from a clinical database in one NSW area health service from July 2006 to June 2007. Extracted case record data was matched to APDC discharge data to determine sensitivity, positive predictive value (PPV and agreement between the two data sources (κ-coefficient. Results The accuracy of the APDC diagnostic codes in identifying site-specific incident cancer ranged from 80-95% sensitivity. This was comparable to the accuracy of APDC procedure codes in identifying curative resection for upper GI cancer. PPV ranged from 42-80% for cancer diagnosis and 56-93% for curative surgery. Agreement between the data sources was >0.72 for most cancer diagnoses and curative resections. However, APDC discharge data was less accurate in reporting common comorbidities - for each condition, sensitivity ranged from 9-70%, whilst agreement ranged from κ = 0.64 for diabetes down to κ  Conclusions Identifying incident cases of upper GI cancer and curative resection from hospital administrative data is satisfactory but under-ascertained. Linkage of multiple population-health datasets is advisable to maximise case ascertainment and minimise false

A versatile calibration procedure for portable coded aperture gamma cameras and RGB-D sensors

Science.gov (United States)

Paradiso, V.; Crivellaro, A.; Amgarou, K.; de Lanaute, N. Blanc; Fua, P.; Liénard, E.

2018-04-01

The present paper proposes a versatile procedure for the geometrical calibration of coded aperture gamma cameras and RGB-D depth sensors, using only one radioactive point source and a simple experimental set-up. Calibration data is then used for accurately aligning radiation images retrieved by means of the γ-camera with the respective depth images computed with the RGB-D sensor. The system resulting from such a combination is thus able to retrieve, automatically, the distance of radioactive hotspots by means of pixel-wise mapping between gamma and depth images. This procedure is of great interest for a wide number of applications, ranging from precise automatic estimation of the shape and distance of radioactive objects to Augmented Reality systems. Incidentally, the corresponding results validated the choice of a perspective design model for a coded aperture γ-camera.

CONSIDERATIONS CONCERNING THE RECOGNITION OF FOREIGN JUDGMENTS IN THE NEW BRAZILIAN CIVIL PROCEDURE CODE

Directory of Open Access Journals (Sweden)

Humberto Dalla Bernardina de Pinho

2016-06-01

Full Text Available The presente study aims to critically analyze the recognition of foreign judgments in the new Brazilian Civil Procedure Code, highlighting the changes brought by the new legislation. The international judicial cooperation was emphasized in the new Code, which was made clear by the prevision of the institute called “direct aid” (“auxílio direto”, the detailed regulation of the recognition of foreign judgements, including the possibility of concession of interim measures and the recognition of foreign interim measures.

HETERO code, heterogeneous procedure for reactor calculation; Program Hetero, heterogeni postupak proracuna reaktora

Energy Technology Data Exchange (ETDEWEB)

Jovanovic, S M; Raisic, N M [Boris Kidric Institute of Nuclear Sciences Vinca, Beograd (Yugoslavia)

1966-11-15

This report describes the procedure for calculating the parameters of heterogeneous reactor system taking into account the interaction between fuel elements related to established geometry. First part contains the analysis of single fuel element in a diffusion medium, and criticality condition of the reactor system described by superposition of elements interactions. the possibility of performing such analysis by determination of heterogeneous system lattice is described in the second part. Computer code HETERO with the code KETAP (calculation of criticality factor {eta}{sub n} and flux distribution) is part of this report together with the example of RB reactor square lattice.

Procedures for treating common cause failures in safety and reliability studies: Procedural framework and examples

International Nuclear Information System (INIS)

Mosleh, A.; Fleming, K.N.; Parry, G.W.; Paula, H.M.; Worledge, D.H.; Rasmuson, D.M.

1988-01-01

This report presents a framework for the inclusion of the impact of common cause failures in risk and reliability evaluations. Common cause failures are defined as that cutset of dependent failures for which causes are not explicitly included in the logic model as basic events. The emphasis here is on providing procedures for a practical, systematic approach that can be used to perform and clearly document the analysis. The framework comprises four major stages: (1) System Logic Model Development; (2) Identification of Common Cause Component Groups; (3) Common Cause Modeling and Data Analysis; and (4) System Quantification and Interpretation of Results. The framework and the methods discussed for performing the different stages of the analysis integrate insights obtained from engineering assessments of the system and the historical evidence from multiple failure events into a systematic, reproducible, and defensible analysis. 22 figs., 34 tabs

FUNDAMENTAL RULES OF THE CIVIL PROCEDURE CODE OF 2015: BRIEF REFLECTIONS

Directory of Open Access Journals (Sweden)

Aluisio Gonçalves de Castro Mendes

2016-12-01

Full Text Available This paper aims to bring some brief reflections on the topics covered in Book I of the General Part in the Code of Civil Procedure of 2015, in each of the twelve articles related to the basic standards, highlighting its relevance to the application and the proper interpretation of new legislation. The intention is not to exhaust the subject, but just to open the debate to bring a few lines to improve the theoretical understanding and improving the judicial services.

Report on nuclear industry quality assurance procedures for safety analysis computer code development and use

International Nuclear Information System (INIS)

Sheron, B.W.; Rosztoczy, Z.R.

1980-08-01

As a result of a request from Commissioner V. Gilinsky to investigate in detail the causes of an error discovered in a vendor Emergency Core Cooling System (ECCS) computer code in March, 1978, the staff undertook an extensive investigation of the vendor quality assurance practices applied to safety analysis computer code development and use. This investigation included inspections of code development and use practices of the four major Light Water Reactor Nuclear Steam Supply System vendors and a major reload fuel supplier. The conclusion reached by the staff as a result of the investigation is that vendor practices for code development and use are basically sound. A number of areas were identified, however, where improvements to existing vendor procedures should be made. In addition, the investigation also addressed the quality assurance (QA) review and inspection process for computer codes and identified areas for improvement

Documentation for TRACE: an interactive beam-transport code

International Nuclear Information System (INIS)

Crandall, K.R.; Rusthoi, D.P.

1985-01-01

TRACE is an interactive, first-order, beam-dynamics computer program. TRACE includes space-charge forces and mathematical models for a number of beamline elements not commonly found in beam-transport codes, such as permanent-magnet quadrupoles, rf quadrupoles, rf gaps, accelerator columns, and accelerator tanks. TRACE provides an immediate graphic display of calculative results, has a powerful and easy-to-use command procedure, includes eight different types of beam-matching or -fitting capabilities, and contains its own internal HELP package. This report describes the models and equations used for each of the transport elements, the fitting procedures, and the space-charge/emittance calculations, and provides detailed instruction for using the code

U.F.F.A.: A numerical procedure for fatigue analysis according to ASME code

International Nuclear Information System (INIS)

Bellettato, W.; Ticozzi, C.; Zucchini, C.

1981-01-01

A new procedure is developed, which employs some already used methodologies and brings some new concepts. The computer code UFFA employs the so obtained procedure. This paper in the first part describes the methodology used for the usage factor calculation, in the second part carries a general description of the code and in the third part shows some example and their respective results. We suppose an elastic behaviour of the materials and we do not consider the effect of the application order of the loads. Moreover, we suppose valid the hypothesis of cumulative damage, that is we apply the Miner's rule. One of the problems in the nuclear components fatigue analysis is that in the load histories there is a high number of operational cycles for which we cannot specify a succession in the time. Therefore, it was introduced the concept of 'level' (or steady working status) by which we can approximate the load conditions in realistic way. As regard the problem of multiaxial cases, it is possible to show that it is not right, an neither conservative, to make a distinguished analysis of the 3 stress differences and then take the maximum of the 3 compuoted usage factors as component usage factor. Indeed, as the stresses act on the structure at the same time, it is necessary a contemporary analysis of the 3 stress difference curves. The computer code can deal as well with the case of sher stresses (varying principal stress directions) through the ASME 'normalization' procedure. The results of the UFFA program, compared with the results of other programs used at present, come up to the expectations. (orig./HP)

Reference manual for the KfK code PCROSS

International Nuclear Information System (INIS)

Ravndal, S.; Oblozinsky, P.; Kelzenberg, S.; Cierjacks, S.

1991-12-01

The PCROSS code calculates the so-called 'pseudo' cross sections for sequential (x,n) reactions and merges them together with 'effective' cross section for neutron induced reactions into one file of 'collapsed' cross sections. The file is tailored to provide an input for the FISPACT inventory code that calculates the activation and related radiological quantities of material irradiated in given neutron fields. The report summarizes calculational procedure and provides the reader with essential technical details of the code PCROSS (version 1.0) such as description of parameters, common blocks and subroutines. (orig.) [de

Common Envelope Light Curves. I. Grid-code Module Calibration

Energy Technology Data Exchange (ETDEWEB)

Galaviz, Pablo; Marco, Orsola De; Staff, Jan E.; Iaconi, Roberto [Department of Physics and Astronomy, Macquarie University, Sydney, NSW (Australia); Passy, Jean-Claude, E-mail: Pablo.Galaviz@me.com [Argelander-Institut für Astronomie, Auf dem Hügel 71, D-53121 Bonn (Germany)

2017-04-01

The common envelope (CE) binary interaction occurs when a star transfers mass onto a companion that cannot fully accrete it. The interaction can lead to a merger of the two objects or to a close binary. The CE interaction is the gateway of all evolved compact binaries, all stellar mergers, and likely many of the stellar transients witnessed to date. CE simulations are needed to understand this interaction and to interpret stars and binaries thought to be the byproduct of this stage. At this time, simulations are unable to reproduce the few observational data available and several ideas have been put forward to address their shortcomings. The need for more definitive simulation validation is pressing and is already being fulfilled by observations from time-domain surveys. In this article, we present an initial method and its implementation for post-processing grid-based CE simulations to produce the light curve so as to compare simulations with upcoming observations. Here we implemented a zeroth order method to calculate the light emitted from CE hydrodynamic simulations carried out with the 3D hydrodynamic code Enzo used in unigrid mode. The code implements an approach for the computation of luminosity in both optically thick and optically thin regimes and is tested using the first 135 days of the CE simulation of Passy et al., where a 0.8  M {sub ⊙} red giant branch star interacts with a 0.6  M {sub ⊙} companion. This code is used to highlight two large obstacles that need to be overcome before realistic light curves can be calculated. We explain the nature of these problems and the attempted solutions and approximations in full detail to enable the next step to be identified and implemented. We also discuss our simulation in relation to recent data of transients identified as CE interactions.

Procedures of grasp92 code to calculate accurate Dirac-Coulomb energy for the ground sate of helium atom

International Nuclear Information System (INIS)

Utsumi, Takayuki; Sasaki, Akira

2000-02-01

The procedures of grasp92 code to calculate accurate (relative error nearly equal 10 -7 ) eigenvalue for the ground sate of helium atom of the Dirac-Coulomb Hamiltonian are presented. The grasp92 code, based on the multi-configuration Dirac-Fock method, is widely used to calculate the atomic properties. However, the main part of the accurate calculations, extended optimal level calculation (EOL), suffer frequently numerical instabilities due to the lack of the confident procedures. The purpose of this report is to illustrate the guideline for stable EOL calculations by calculating the most fundamental atomic system, i.e. the ground sate of helium atom ls 2 1 S 2 . This procedure could be extended for the high-precise eigenfunction calculation of more complex atomic systems, for example highly ionized atoms and high-Z atoms. (author)

PROCEDURAL ASPECTS REGARDING CORRUPTION CRIMES AS STIPULATED IN THE CRIMINAL CODE OF LAW AND LAW NO. 78/2000

Directory of Open Access Journals (Sweden)

Anca Lelia Lorincz

2012-11-01

Full Text Available The intensification of the European political and economic integration also requires that our country contributes to continuing the tradition of incriminating criminal deeds perpetrated in the business field. Romanian authorities display their constant interest in expanding their knowledge of the crime phenomenon in this field, while looking to identify effective means to control it. Within this context, corruption crimes approached in the Criminal Code of Law and in Law no. 78/2000 take a distinct place within the group of crimes for which prevention and combating is regulated under the Business Criminal Code of Law. In order to ensure celerity in solving criminal cases involving corruption crimes, certain derogations from the usual procedure were required, as well as enforcement of a special procedure; also, specific procedural aspects regarding corruption crimes need to be retained as we look at the coming into force of the new criminal and criminal procedure legislation.

A numerical similarity approach for using retired Current Procedural Terminology (CPT) codes for electronic phenotyping in the Scalable Collaborative Infrastructure for a Learning Health System (SCILHS).

Science.gov (United States)

Klann, Jeffrey G; Phillips, Lori C; Turchin, Alexander; Weiler, Sarah; Mandl, Kenneth D; Murphy, Shawn N

2015-12-11

Interoperable phenotyping algorithms, needed to identify patient cohorts meeting eligibility criteria for observational studies or clinical trials, require medical data in a consistent structured, coded format. Data heterogeneity limits such algorithms' applicability. Existing approaches are often: not widely interoperable; or, have low sensitivity due to reliance on the lowest common denominator (ICD-9 diagnoses). In the Scalable Collaborative Infrastructure for a Learning Healthcare System (SCILHS) we endeavor to use the widely-available Current Procedural Terminology (CPT) procedure codes with ICD-9. Unfortunately, CPT changes drastically year-to-year - codes are retired/replaced. Longitudinal analysis requires grouping retired and current codes. BioPortal provides a navigable CPT hierarchy, which we imported into the Informatics for Integrating Biology and the Bedside (i2b2) data warehouse and analytics platform. However, this hierarchy does not include retired codes. We compared BioPortal's 2014AA CPT hierarchy with Partners Healthcare's SCILHS datamart, comprising three-million patients' data over 15 years. 573 CPT codes were not present in 2014AA (6.5 million occurrences). No existing terminology provided hierarchical linkages for these missing codes, so we developed a method that automatically places missing codes in the most specific "grouper" category, using the numerical similarity of CPT codes. Two informaticians reviewed the results. We incorporated the final table into our i2b2 SCILHS/PCORnet ontology, deployed it at seven sites, and performed a gap analysis and an evaluation against several phenotyping algorithms. The reviewers found the method placed the code correctly with 97 % precision when considering only miscategorizations ("correctness precision") and 52 % precision using a gold-standard of optimal placement ("optimality precision"). High correctness precision meant that codes were placed in a reasonable hierarchal position that a reviewer

Code of practice for radiation protection in dentistry (1987)

International Nuclear Information System (INIS)

1988-01-01

This code is intended as a guide to safe practices and lays down detailed requirements for the following protective measures : allocation of responsibility and need for clinical assessment of the indications for radiography; provision of appropriate equipment, film and processing facilities; adoption of procedures to minimise exposure to radiation. This code deals with radiographic procedures commonly used in general and specialist dental practice. These entail : intra-oral radiography: periapical, bitewing and occlusal views; panoramic radiography: intra-oral tube radiography and panoramic tomography; radiography of the complete skull or certain parts of the dento-maxillo-facial region; hand and wrist radiography for the sole purpose of the determination of the bone age

JPRS Report: East Asia, Southeast Asia, LPDR Criminal Code, Courts, and Criminal Procedure.

Science.gov (United States)

1991-03-05

1941 - 1991 JPRS Repor East Asia Southeast Asia LPDR Criminal Code, Courts, and Criminal Procedure mom m £C QUALITY »ra^r...prostitution, will be impris- oned for three to five years. Article 124. Incest . Anyone who has sexual intercourse with parents, step- parents...This consists of facts which indicate whether there have been actions dangerous to society, the guilt of the per- sons who undertook the

A Critical Appraisal of the Juvenile Justice System under Cameroon's 2005 Criminal Procedure Code: Emerging Challenges

Directory of Open Access Journals (Sweden)

S Tabe

2012-03-01

Full Text Available The objective of this article is to examine the changes introduced by the 2005 Cameroonian Criminal Procedure Code on matters of juvenile justice, considering that before this Code, juvenile justice in Cameroon was governed by extra-national laws. In undertaking this analysis, the article highlights the evolution of the administration of juvenile justice 50 years after independence of Cameroon. It also points out the various difficulties and shortcomings in the treatment of juvenile offenders in Cameroon since the enactment of the new Criminal Procedure Code. The article reveals that the 2005 Code is an amalgamation of all hitherto existing laws in the country that pertained to juvenile justice, and that despite the considerable amount of criticism it has received, the Code is clearly an improvement of the system of juvenile justice in Cameroon, since it represents a balance of the due process rights of young people, the protection of society and the special needs of young offenders. This is so because the drafters of the Code took a broad view of the old laws on juvenile justice. Also a wide range of groups were consulted, including criminal justice professionals, children’s service organisations, victims, parents, young offenders, educators, advocacy groups and social-policy analysts. However, to address the challenges that beset the juvenile justice system of Cameroon, the strategy of the government should be focussed on three areas: the prevention of youth crime, the provision of meaningful consequences for the actions of young people, and the rehabilitation and reintegration of young offenders. Cameroonian law should seek educative solutions rather than to impose prison sentences or other repressive measures on young offenders. Special courts to deal with young offenders should be established outside the regular penal system and should be provided with resources that are adequate for and appropriate to fostering their understanding of

Software Certification - Coding, Code, and Coders

Science.gov (United States)

Havelund, Klaus; Holzmann, Gerard J.

2011-01-01

We describe a certification approach for software development that has been adopted at our organization. JPL develops robotic spacecraft for the exploration of the solar system. The flight software that controls these spacecraft is considered to be mission critical. We argue that the goal of a software certification process cannot be the development of "perfect" software, i.e., software that can be formally proven to be correct under all imaginable and unimaginable circumstances. More realistically, the goal is to guarantee a software development process that is conducted by knowledgeable engineers, who follow generally accepted procedures to control known risks, while meeting agreed upon standards of workmanship. We target three specific issues that must be addressed in such a certification procedure: the coding process, the code that is developed, and the skills of the coders. The coding process is driven by standards (e.g., a coding standard) and tools. The code is mechanically checked against the standard with the help of state-of-the-art static source code analyzers. The coders, finally, are certified in on-site training courses that include formal exams.

Preliminary Diagnosis About the Appeal's Suppression in the Brazilian New Code of Civil Procedure

Directory of Open Access Journals (Sweden)

Diego Souza Merigueti

2016-10-01

Full Text Available The phenomenon of sluggishness in the judicial system reveals an attack to justice. In this purpose, this article aims to analyze the appeal's suppression in the brazilian new Code of Civil Procedure, as a way able to reach the scope of giving celerity to the jurisdictional protection in Brazil. At the diagnosis proposed, it will be presented possible legal consequences arising from the limitation of the "Agravo de Instrumento" and from the abolition of both "Agravo Retido" and "Embargos Infringentes" in the procedural diploma newly sanctioned. Unfolding this analysis, it is worth highlighting the contemporary movement to perform constitutional values and guarantees in procedural legislation, including the reasonable duration of the proceeding. This paper was produced by analyzing concepts and in consultation to national and foreing books, from authors of recognized contribution to the field, as well as through the study of the new procedural law, why it is therefore a literature review and a qualitative analysis.

Procedures for conducting common cause failure analysis in probabilistic safety assessment

International Nuclear Information System (INIS)

1992-05-01

The principal objective of this report is to supplement the procedure developed in Mosleh et al. (1988, 1989) by providing more explicit guidance for a practical approach to common cause failures (CCF) analysis. The detailed CCF analysis following that procedure would be very labour intensive and time consuming. This document identifies a number of options for performing the more labour intensive parts of the analysis in an attempt to achieve a balance between the need for detail, the purpose of the analysis and the resources available. The document is intended to be compatible with the Agency's Procedures for Conducting Probabilistic Safety Assessments for Nuclear Power Plants (IAEA, 1992), but can be regarded as a stand-alone report to be used in conjunction with NUREG/CR-4780 (Mosleh et al., 1988, 1989) to provide additional detail, and discussion of key technical issues

Best estimate procedures for fatigue evaluation in the framework of German KTA code

Energy Technology Data Exchange (ETDEWEB)

Seichter, Johannes [Siempelkamp Pruef- und Gutachter-Gesellschaft mbH, Dresden (Germany); Reese, Sven H.; Klucke, Dietmar [E.ON Kernkraft GmbH, Hannover (Germany)

2013-07-01

By decreasing the level of conservatism in fatigue analyses it is possible to reduce as well fatigue usage factors calculated for EOL (end of life) as 'actual CUF' (cumulative fatigue usage factor) of NPP components considerably. It is the opinion of the authors, that the mentioned best estimate procedures should be used in the course of fatigue assessment to fulfill e.g. the demands of the KTA code with regard to environmental assisted fatigue. (orig.)

Core design optimization by integration of a fast 3-D nodal code in a heuristic search procedure

Energy Technology Data Exchange (ETDEWEB)

Geemert, R. van; Leege, P.F.A. de; Hoogenboom, J.E.; Quist, A.J. [Delft University of Technology, NL-2629 JB Delft (Netherlands)

1998-07-01

An automated design tool is being developed for the Hoger Onderwijs Reactor (HOR) in Delft, the Netherlands, which is a 2 MWth swimming-pool type research reactor. As a black box evaluator, the 3-D nodal code SILWER, which up to now has been used only for evaluation of predetermined core designs, is integrated in the core optimization procedure. SILWER is a part of PSl's ELCOS package and features optional additional thermal-hydraulic, control rods and xenon poisoning calculations. This allows for fast and accurate evaluation of different core designs during the optimization search. Special attention is paid to handling the in- and output files for SILWER such that no adjustment of the code itself is required for its integration in the optimization programme. The optimization objective, the safety and operation constraints, as well as the optimization procedure, are discussed. (author)

Core design optimization by integration of a fast 3-D nodal code in a heuristic search procedure

International Nuclear Information System (INIS)

Geemert, R. van; Leege, P.F.A. de; Hoogenboom, J.E.; Quist, A.J.

1998-01-01

An automated design tool is being developed for the Hoger Onderwijs Reactor (HOR) in Delft, the Netherlands, which is a 2 MWth swimming-pool type research reactor. As a black box evaluator, the 3-D nodal code SILWER, which up to now has been used only for evaluation of predetermined core designs, is integrated in the core optimization procedure. SILWER is a part of PSl's ELCOS package and features optional additional thermal-hydraulic, control rods and xenon poisoning calculations. This allows for fast and accurate evaluation of different core designs during the optimization search. Special attention is paid to handling the in- and output files for SILWER such that no adjustment of the code itself is required for its integration in the optimization programme. The optimization objective, the safety and operation constraints, as well as the optimization procedure, are discussed. (author)

An electric mandate. The EU procedure for harmonising cross-border network codes for electricity

Energy Technology Data Exchange (ETDEWEB)

Jevnaker, Torbjoerg

2012-07-01

The research question addressed in this report is why the EU procedure for developing network codes for electricity was enacted in its particular form. Passed by the EU in 2009, European organisations partly outside of the formal EU structure were given a mandate to make rules that would apply across the EU. This was puzzling given the observed resistance on part of the member states to let go of national control over energy issues. Drawing on institutionalist perspectives, the analysis shows that the procedure would not have been passed without support from and compromise among the Commission, European Parliament and the member states in Council; that parts of the procedure imitated existing practices within related policy areas; that horizontal and vertical specialization within the nation-states along with a Commission actively promoting transnational cooperation changed the feedback mechanisms, which changed the direction of European energy market regulation; and finally, that the new actors played an active role vis-a-vis EU bodies as the latter were legislating on the procedure. (Author)

Esophageal function testing: Billing and coding update.

Science.gov (United States)

Khan, A; Massey, B; Rao, S; Pandolfino, J

2018-01-01

Esophageal function testing is being increasingly utilized in diagnosis and management of esophageal disorders. There have been several recent technological advances in the field to allow practitioners the ability to more accurately assess and treat such conditions, but there has been a relative lack of education in the literature regarding the associated Common Procedural Terminology (CPT) codes and methods of reimbursement. This review, commissioned and supported by the American Neurogastroenterology and Motility Society Council, aims to summarize each of the CPT codes for esophageal function testing and show the trends of associated reimbursement, as well as recommend coding methods in a practical context. We also aim to encourage many of these codes to be reviewed on a gastrointestinal (GI) societal level, by providing evidence of both discrepancies in coding definitions and inadequate reimbursement in this new era of esophageal function testing. © 2017 John Wiley & Sons Ltd.

Safety code 19: recommended safety procedures for the selection, installation and use of x-ray diffraction equipment

International Nuclear Information System (INIS)

1984-01-01

This document is one of a series of Safety Codes prepared by the Radiation Protection Bureau to set out requirements for the safe use of radiation emitting devices. The equipment and installation guidelines and safety procedures detailed in this Code are primarily for the instruction and guidance of persons employed in Federal Public Service Departments and Agencies, as well as those coming under the jurisdiction of the Canada Labour Code. This Safety Code is also intended to assist other users of X-ray diffraction equipment to select safe equipment and to install and use it so that the radiation hazard to the operator and other persons in its vicinity is negligible. It should be noted that facilities under provincial jurisdiction may be subject to requirements specified under provincial statutes. This Code supersedes Safety Code RPD-SC-7, entitled 'Requirements For Non-Medical X-Ray Equipment, Use and Installation', insofar as X-ray diffraction equipment is concerned, and it is intended to complement X-ray equipment design, construction and performance standards promulgated under the Radiation Emitting Devices Act

International common-cause failure data exchange. ICDE general coding guidelines - Technical note

International Nuclear Information System (INIS)

Johanson, Gunnar; Werner, Wolfgang; Concepcion Capote, Marina; Kreuser, Albert; Rasmuson, Dale; Jonsson, Esther; Pereira Pagan, Begona; Tirira, Jorge; Morris, Ian; Morales, Rosa; Oxberry, Anna; Kreuser, Albert

2004-01-01

Several Member countries of the Nuclear Energy Agency of the Organisation for Economic Co-operation and Development (OECD/NEA) have established the International Common-Cause Failure Data Exchange Project (ICDE Project) to encourage multilateral co-operation in the collection and analysis of data relating to Common-Cause Failure (CCF) events. The objectives of the ICDE Project are to: a) Collect and analyse CCF events over the long term so as to better understand such events, their causes, and their prevention; b) Generate qualitative insights into the root causes of CCF events which can then be used to derive approaches or mechanisms for their prevention or for mitigating their consequences; c) Establish a mechanism for the efficient feedback of experience gained in connection with CCF phenomena, including the development of defences against their occurrence, such as indicators for risk based inspections; and d) Record event attributes to facilitate quantification of CCF frequencies when so decided by the Project Working Group. The ICDE Project is envisaged to comprise all possible events of interest, including both complete and partial ICDE events. The ICDE Project will cover the key components of the main safety systems. Presently, the components listed below are included in the ICDE Project. Data have been collected for the six first components in the list: Centrifugal pumps, Diesel generators, Motor operated valves, Safety relief valves/power operated relief valves, Check valves, Batteries, Level measurement, Breakers, Control rod drive assemblies. Others will be added to this list later on. In this component coding guidelines, explanations on the ICDE General coding format are given. The guide reflects present experience with the data format and with the collected data. Further interpretations and clarifications will be added, should they become necessary. For each component analysed in the ICDE project, separate coding guidance is provided in the appendices

Fundamental Rules of Civil Procedure : The Tuning of the Federal Constitution and the New Code of Civil Procedure in The Guarantee and Protection of Fundamental Rights

Directory of Open Access Journals (Sweden)

Fernanda Sell de Souto Goulart Fernandes

2016-10-01

Full Text Available On  March  16th,  2015  was  enacted  Law  13,105.  Known  for  having  the  intention  to democratize the process, the new Civil Procedure Code innovated in many ways, and one of those that highlights is the introduction on the legal text of the Procedure Constitutional Principles, already provide in the Constitution. The legislator's attitude positivate in the Ordinary   legislation   the   constitutional   principles   only   embodies   the   wave   of constitutionalization of rights. And the Civil Procedure could not be averse to this trend. Thus, this article aims to analyze the basic rules of civil procedure.

Serbian translation of French Code of Civil Procedure from 1837: Part two: Legal terminology of the translation

Directory of Open Access Journals (Sweden)

Stanković Uroš N.

2015-01-01

Full Text Available The article deals with legal terms appearing in Serbian translation of French Code of Civil Procedure (Code de procédure civile, 1806 authored by Serbian writer and politician Lazar Zuban (1795-1850. The author made an attempt to determine whether the terms used by Zuban had existed in historical sources previous to the translator's work. If so, it would mean that Zuban was using already existing technical terms. In cases in which he failed to find certain legal term in texts older than Zuban's work, the author tried to establish if the unfound term had been the translator's invention. As to the terms of civil law, Zuban mostly took over words already present in Serbian vocabulary at the time. This fact is easily explainable: family, property, contracts, torts, inheritage are very present in people's everyday life, which brought about terminology of civil law to be relatively developed. On the contrary, terms belonging to the civil procedure were scarce because judiciary and court procedure in the time of Zuban's work were still being on rudimentary level. That is the reason why the translator had to forge his own legal terms. Zuban did not translate German legal terms (the translator used German translation of a Code as protograph mechanically; he was making effort to fathom the meaning of a word in question and find its adequate Serbian equivalent. In some cases that effort was fruitful. Nevertheless, in a long term Zuban's labor was in vain, as none of his forged words survived in Serbian legal terminology.

Procedure and code for calculating black control rods taking into account epithermal absorption, code CAS-1; Postupak i program za proracun crnih kontrolnih sipki, uzimajuci u obzir i epitermalnu apsorpciju, CAS-1

Energy Technology Data Exchange (ETDEWEB)

Martinc, R; Trivunac, N; Zivkovic, Z [Boris Kidric Institute of nuclear sciences Vinca, Belgrade (Yugoslavia)

1964-12-15

This report describes the computer code CAS-1, calculation method and procedure applied for calculating the black control rods taking into account the epithermal neutron absorption. Results obtained for supercell method applied for regular lattice reflected in the multiplication medium is part of this report in addition to the computer code manual.

Procedural and legal status of the injured party according to the new criminal procedure code of the Republic of Serbia

Directory of Open Access Journals (Sweden)

Grubač Momčilo

2012-01-01

Full Text Available In this article the author is critically analyzing certain solutions of the new Criminal Procedure Code of the Republic of Serbia from 2011 which consider the injured party and their rights in the criminal proceeding. He states that unlike the previous ones, this Code does not improve the status of the injured party but makes it even worse. The author particularly claims that the legislator yet again failed to establish the right of the injured party to be efficiently compensated in the event of a serious offense from a special fund and immediately after the crime has been committed, but prior to the end of the criminal proceeding. In the provision of the Code which states that the injured party may take over the prosecution and become a prosecutor replacing the Public Prosecutor (subsidiary prosecutor only if the Public Prosecutor withdraws after having confirmed the indictment, however not in the cases of rejection of criminal charges or withdrawal from the prosecution in the previous proceeding, the author sees not only the limitation of the rights of the injured party, but also jeopardy of the public interest. This is due to the fact that, freed from a threat of the subsidiary accusation by the injured party, the Public Prosecutor has gained an absolute and uncontrolled monopoly over the initiation of criminal proceeding. According to the author, the subject of the proceedings will not have any substantial use from some rights which the new Code assigns to the injured party (for example the right to appeal against the judgment on the adjudicated property claim. In conclusion, the author stresses out that in spite of his objections against certain provisions in the Code, the legal status of the injured party is more favorable in the criminal law of Serbia then in many other countries.

Investigation of the Performance of Multidimensional Equating Procedures for Common-Item Nonequivalent Groups Design

Directory of Open Access Journals (Sweden)

Burcu ATAR

2017-12-01

Full Text Available In this study, the performance of the multidimensional extentions of Stocking-Lord, mean/mean, and mean/sigma equating procedures under common-item nonequivalent groups design was investigated. The performance of those three equating procedures was examined under the combination of various conditions including sample size, ability distribution, correlation between two dimensions, and percentage of anchor items in the test. Item parameter recovery was evaluated calculating RMSE (root man squared error and BIAS values. It was found that Stocking-Lord procedure provided the smaller RMSE and BIAS values for both item discrimination and item difficulty parameter estimates across most conditions.

Surgical resident involvement is safe for common elective general surgery procedures.

Science.gov (United States)

Tseng, Warren H; Jin, Leah; Canter, Robert J; Martinez, Steve R; Khatri, Vijay P; Gauvin, Jeffrey; Bold, Richard J; Wisner, David; Taylor, Sandra; Chen, Steven L

2011-07-01

Outcomes of surgical resident training are under scrutiny with the changing milieu of surgical education. Few have investigated the effect of surgical resident involvement (SRI) on operative parameters. Examining 7 common general surgery procedures, we evaluated the effect of SRI on perioperative morbidity and mortality and operative time (OpT). The American College of Surgeons National Surgical Quality Improvement Program database (2005 to 2007) was used to identify 7 cases of nonemergent operations. Cases with simultaneous procedures were excluded. Logistic regression was performed across all procedures and within each procedure incorporating SRI, OpT, and risk-stratifying American College of Surgery National Surgical Quality Improvement Program morbidity and mortality probability scores, which incorporate multiple prognostic individual patient factors. Procedure-specific, SRI-stratified OpTs were compared using Wilcoxon rank-sum tests. A total of 71.3% of the 37,907 cases had SRI. Absolute 30-day morbidity for all cases with SRI and without SRI were 3.0% and 1.0%, respectively (p < 0.001); absolute 30-day mortality for all cases with SRI and without SRI were 0.1% and 0.08%, respectively (p < 0.001). After multivariate analysis by specific procedure, SRI was not associated with increased morbidity but was associated with decreased mortality during open right colectomy (odds ratio 0.32; p = 0.01). Across all procedures, SRI was associated with increased morbidity (odds ratio 1.14; p = 0.048) but decreased mortality (odds ratio 0.42; p < 0.001). Mean OpT for all procedures was consistently lower for cases without SRI. SRI has a measurable impact on both 30-day morbidity and mortality and OpT. These data have implications to the impact associated with surgical graduate medical education. Further studies to identify causes of patient morbidity and prevention strategies in surgical teaching environments are warranted. Copyright © 2011 American College of Surgeons

Status of computer codes available in AEOI for reactor physics analysis

International Nuclear Information System (INIS)

Karbassiafshar, M.

1986-01-01

Many of the nuclear computer codes available in Atomic Energy Organization of Iran AEOI can be used for physics analysis of an operating reactor or design purposes. Grasp of the various methods involved and practical experience with these codes would be the starting point for interesting design studies or analysis of operating conditions of presently existing and future reactors. A review of the objectives and flowchart of commonly practiced procedures in reactor physics analysis of LWRs and related computer codes was made, extrapolating to the nationally and internationally available resources. Finally, effective utilization of the existing facilities is discussed and called upon

Declarative and Procedural Working Memory: Common Principles, Common Capacity Limits?

Directory of Open Access Journals (Sweden)

Klus Oberauer

2010-10-01

Full Text Available Working memory is often described as a system for simultaneous storage and processing. Much research – and most measures of working-memory capacity – focus on the storage component only, that is, people's ability to recall or recognize items after short retention intervals. The mechanisms of processing information are studied in a separate research tradition, concerned with the selection and control of actions in simple choice situations, dual-task constellations, or task-switching setups. both research traditions investigate performance based on representations that are temporarily maintained in an active, highly accessible state, and constrained by capacity limits. In this article an integrated theoretical framework of declarative and procedural working memory is presented that relates the two domains of research to each other. Declarative working memory is proposed to hold representations available for processing (including recall and recognition, whereas procedural working memory holds representations that control processing (i. e., task sets, stimulus-response mappings, and executive control settings. The framework motivates two hypotheses: Declarative and procedural working memory have separate capacity limits, and they operate by analogous principles. The framework also suggests a new characterization of executive functions as the subset of processes governed by procedural working memory that has as its output a change in the conditions of operation of the working-memory system.

Classification of radiological procedures

International Nuclear Information System (INIS)

1989-01-01

A classification for departments in Danish hospitals which use radiological procedures. The classification codes consist of 4 digits, where the first 2 are the codes for the main groups. The first digit represents the procedure's topographical object and the second the techniques. The last 2 digits describe individual procedures. (CLS)

International Common Cause Failure Data Exchange (ICDE). General Coding Guidelines - Updated Version, October 2011

International Nuclear Information System (INIS)

Johanson, Gunnar; Werner, Wolfgang; Capote, Marina Concepcion; Kreuser, Albert

2012-01-01

Several OECD/NEA member countries have established the International Common-Cause Failure Data Exchange Project ('ICDE Project') to encourage multilateral cooperation in the collection and analysis of data relating to Common-Cause Failure (CCF) events. The objectives of the ICDE Project are to: a) Collect and analyse CCF events over the long term so as to better understand such events, their causes, and their prevention. b) Generate qualitative insights into the root causes of CCF events which can then be used to derive approaches or mechanisms for their prevention or for mitigating their consequences. c) Establish a mechanism for the efficient feedback of experience gained in connection with CCF phenomena, including the development of defenses against their occurrence, such as indicators for risk based inspections. d) Record event attributes to facilitate quantification of CCF frequencies when so decided by the Project Working Group. The ICDE Project is envisaged to comprise all possible events of interest, including both complete and partial ICDE events. The ICDE Project will cover the key components of the main safety systems. Presently, the components listed below are included in the ICDE Project. Data have been collected for the six first components in the list: Centrifugal pumps, Diesel generators, Motor operated valves, Safety relief valves/power operated relief valves, Check valves, Batteries, Level measurement, Breakers, Control rod drive assemblies. Others will be added to this list later on. In this component coding guidelines, explanations on the ICDE general coding format are given. The guide reflects present experience with the data format and with the collected data. Further interpretations and clarifications will be added, should they become necessary. For each component analysed in the ICDE project, separate coding guidance is provided in the appendices ICDECG 01-06, specifying details relevant to the respective components

Towards a European code of medical ethics. Ethical and legal issues.

Science.gov (United States)

Patuzzo, Sara; Pulice, Elisabetta

2017-01-01

The feasibility of a common European code of medical ethics is discussed, with consideration and evaluation of the difficulties such a project is going to face, from both the legal and ethical points of view. On the one hand, the analysis will underline the limits of a common European code of medical ethics as an instrument for harmonising national professional rules in the European context; on the other hand, we will highlight some of the potentials of this project, which could be increased and strengthened through a proper rulemaking process and through adequate and careful choice of content. We will also stress specific elements and devices that should be taken into consideration during the establishment of the code, from both procedural and content perspectives. Regarding methodological issues, the limits and potentialities of a common European code of medical ethics will be analysed from an ethical point of view and then from a legal perspective. The aim of this paper is to clarify the framework for the potential but controversial role of the code in the European context, showing the difficulties in enforcing and harmonising national ethical rules into a European code of medical ethics. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Neurological Complications Related to Elective Orthopedic Surgery: Part 1: Common Shoulder and Elbow Procedures.

Science.gov (United States)

Dwyer, Tim; Henry, Patrick D G; Cholvisudhi, Phantila; Chan, Vincent W S; Theodoropoulos, John S; Brull, Richard

2015-01-01

Many anesthesiologists are unfamiliar with the rate of surgical neurological complications of the shoulder and elbow procedures for which they provide local anesthetic-based anesthesia and/or analgesia. Part 1 of this narrative review series on neurological complications of elective orthopedic surgery describes the mechanisms and likelihood of peripheral nerve injury associated with some of the most common shoulder and elbow procedures, including open and arthroscopic shoulder procedures, elbow arthroscopy, and total shoulder and elbow replacement. Despite the many articles available, the overall number of studied patients is relatively low. Large prospective trials are required to establish the true incidence of neurological complications following elective shoulder and elbow surgery. As the popularity of regional anesthesia increases with the development of ultrasound guidance, anesthesiologists should have a thoughtful understanding of the nerves at risk of surgical injury during elective shoulder and elbow procedures.

Root Canal Stripping: Malpractice or Common Procedural Accident-An Ethical Dilemma in Endodontics.

Science.gov (United States)

Ciobanu, Ionela Elisabeta; Rusu, Darian; Stratul, Stefan-Ioan; Didilescu, Andreea Cristina; Cristache, Corina Marilena

2016-01-01

Root canal stripping is defined as an oblong, vertical perforation that appears especially in the middle section of curved root canals during endodontic treatments with nickel-titanium (Ni-Ti) instruments. Its occurrence may drastically affect the outcome of the treatment, transforming a common otherwise efficient endodontic procedure into a complication such as tooth extraction. In order to discuss the ethical and legal consequences, two cases of dental strip perforations are herewith presented. Due to the existence of risk factors for dental strip perforation, experience of the clinician and the use of magnification and modern imagistic methods (CBCT) may avoid or reduce the frequency of this type of accidents. Under correct working circumstances, dental stripping should not be regarded as a malpractice but as a procedural accident. However, the patient must always be informed, before and during the endodontic procedure, about the event and the possible complications that may occur.

Diagnostic Coding for Epilepsy.

Science.gov (United States)

Williams, Korwyn; Nuwer, Marc R; Buchhalter, Jeffrey R

2016-02-01

Accurate coding is an important function of neurologic practice. This contribution to Continuum is part of an ongoing series that presents helpful coding information along with examples related to the issue topic. Tips for diagnosis coding, Evaluation and Management coding, procedure coding, or a combination are presented, depending on which is most applicable to the subject area of the issue.

Coding of Neuroinfectious Diseases.

Science.gov (United States)

Barkley, Gregory L

2015-12-01

Accurate coding is an important function of neurologic practice. This contribution to Continuum is part of an ongoing series that presents helpful coding information along with examples related to the issue topic. Tips for diagnosis coding, Evaluation and Management coding, procedure coding, or a combination are presented, depending on which is most applicable to the subject area of the issue.

Mortality of induced abortion, other outpatient surgical procedures and common activities in the United States.

Science.gov (United States)

Raymond, Elizabeth G; Grossman, Daniel; Weaver, Mark A; Toti, Stephanie; Winikoff, Beverly

2014-11-01

The recent surge of new legislation regulating induced abortion in the United States is ostensibly motivated by the desire to protect women's health. To provide context for interpreting the risk of abortion, we compared abortion-related mortality to mortality associated with other outpatient surgical procedures and selected nonmedical activities. We calculated the abortion-related mortality rate during 2000-2009 using national data. We searched PubMed and other sources for contemporaneous data on mortality associated with other outpatient procedures commonly performed on healthy young women, marathon running, bicycling and driving. The abortion-related mortality rate in 2000-2009 in the United States was 0.7 per 100,000 abortions. Studies in approximately the same years found mortality rates of 0.8-1.7 deaths per 100,000 plastic surgery procedures, 0-1.7deaths per 100,000 dental procedures, 0.6-1.2 deaths per 100,000 marathons run and at least 4 deaths among 100,000 cyclists in a large annual bicycling event. The traffic fatality rate per 758 vehicle miles traveled by passenger cars in the United States in 2007-2011 was about equal to the abortion-related mortality rate. The safety of induced abortion as practiced in the United States for the past decade met or exceeded expectations for outpatient surgical procedures and compared favorably to that of two common nonmedical voluntary activities. The new legislation restricting abortion is unnecessary; indeed, by reducing the geographic distribution of abortion providers and requiring women to travel farther for the procedure, these laws are potentially detrimental to women's health. Copyright © 2014 Elsevier Inc. All rights reserved.

Effects of the 2013 Psychiatric Current Procedural Terminology Codes Revision on Psychotherapy in Psychiatric Billing.

Science.gov (United States)

Mark, Tami L; Olesiuk, William J; Sherman, Laura J; Ali, Mir M; Mutter, Ryan; Teich, Judith L

2017-11-01

The purpose of this study was to determine whether the changes to the psychiatric Current Procedural Terminology (CPT) codes implemented in 2013 were associated with changes in types of services for which psychiatrists billed. Analyses were conducted using paid private insurance claims from a large commercial database. The participant cohort comprised psychiatrists with at least one psychiatry visit reported in the database in each calendar year studied: 2012 (N of visits=778,445), 2013 (N=748,317), and 2014 (N=754,760). The percentage of visits in which psychiatrists billed for psychotherapy declined from 51.4% in 2012 to 42.1% in 2014. The decline held after the analyses adjusted for patient characteristics, plan type, and region. The update to CPT codes resulted in a decrease in visits for which psychiatrists billed for psychotherapy. Further research should explore whether the change in billing corresponds to changes in service delivery.

Locality-preserving logical operators in topological stabilizer codes

Science.gov (United States)

Webster, Paul; Bartlett, Stephen D.

2018-01-01

Locality-preserving logical operators in topological codes are naturally fault tolerant, since they preserve the correctability of local errors. Using a correspondence between such operators and gapped domain walls, we describe a procedure for finding all locality-preserving logical operators admitted by a large and important class of topological stabilizer codes. In particular, we focus on those equivalent to a stack of a finite number of surface codes of any spatial dimension, where our procedure fully specifies the group of locality-preserving logical operators. We also present examples of how our procedure applies to codes with different boundary conditions, including color codes and toric codes, as well as more general codes such as Abelian quantum double models and codes with fermionic excitations in more than two dimensions.

Main hearing according to the new Serbian Criminal Procedure Code: Survey in practice

Directory of Open Access Journals (Sweden)

Soković Snežana

2017-01-01

Full Text Available The main hearing is the central part of the criminal procedure. In Serbia, the reform of the national criminal procedure legislation has brought about numerous changes related to this stage of criminal proceedings. Numerous objections have been addressed to the almost entirely new legal text. In an attempt to examine the advantages and disadvantages of the new legislation and observe how the prescribed rules are applied in practice, the authors have conducted an empirical research by attending 205 main hearings which were conducted under the rules of the new Criminal Procedure Code. The research covers a huge number of related issues but, given the page limit, this paper will focus on individual issues observed in trial proceedings. The focal point of reference is the examination of witness, but the authors also consider a number of other issues: the examination of expert witness, the delay of the trial, and the use of a video-link as a novelty introduced owing to the technological achievements of the modern era. The article is organized into several parts. The authors first provide a theoretical background of the issue under consideration and, then, present and discuss the research results provided in tables. In the third part of the article, the authors draw specific conclusions about the current practice in trials proceedings.

THE APPEAL CALLED “EMBARGOS DE DECLARAÇÃO” IN ELECTORAL PROCESS: A BRIEF VIEW AFTER THE BRAZILIAN NEW CIVIL PROCEDURE CODE

Directory of Open Access Journals (Sweden)

Rodrigo Mazzei

2016-12-01

Full Text Available This paper analyzes the regulation of embargos de declaração with in the electoral process, as well as the interpretation that has been given by the Courts. Addressing essencial issues of embargos de declaração, as the deadline, legal nature, suitability hypothesis and suspensive effect, many of which are the subject of discussion in doctrine and jurisprudence, mainly due to diversification and variety of rules dealing with the subject (Electoral Code, Regiments Internal of Courts and Civil Procedure Code and Criminal Procedure Code - alternatively applied, besides the need for a constitutional interpretation focused on the embargos de declaração. Observes the proposals of the Project of the New CPC, pending in the legislative, for the regulation of embargos de declaração and the impacts that this new text will bring to the electoral process, pointing out possible ways to conciliation between the “new” civil process and the electoral law.

Applications guide to the MORSE Monte Carlo code

International Nuclear Information System (INIS)

Cramer, S.N.

1985-08-01

A practical guide for the implementation of the MORESE-CG Monte Carlo radiation transport computer code system is presented. The various versions of the MORSE code are compared and contrasted, and the many references dealing explicitly with the MORSE-CG code are reviewed. The treatment of angular scattering is discussed, and procedures for obtaining increased differentiality of results in terms of reaction types and nuclides from a multigroup Monte Carlo code are explained in terms of cross-section and geometry data manipulation. Examples of standard cross-section data input and output are shown. Many other features of the code system are also reviewed, including (1) the concept of primary and secondary particles, (2) fission neutron generation, (3) albedo data capability, (4) DOMINO coupling, (5) history file use for post-processing of results, (6) adjoint mode operation, (7) variance reduction, and (8) input/output. In addition, examples of the combinatorial geometry are given, and the new array of arrays geometry feature (MARS) and its three-dimensional plotting code (JUNEBUG) are presented. Realistic examples of user routines for source, estimation, path-length stretching, and cross-section data manipulation are given. A deatiled explanation of the coupling between the random walk and estimation procedure is given in terms of both code parameters and physical analogies. The operation of the code in the adjoint mode is covered extensively. The basic concepts of adjoint theory and dimensionality are discussed and examples of adjoint source and estimator user routines are given for all common situations. Adjoint source normalization is explained, a few sample problems are given, and the concept of obtaining forward differential results from adjoint calculations is covered. Finally, the documentation of the standard MORSE-CG sample problem package is reviewed and on-going and future work is discussed

Less Physician Practice Competition Is Associated With Higher Prices Paid For Common Procedures.

Science.gov (United States)

Austin, Daniel R; Baker, Laurence C

2015-10-01

Concentration among physician groups has been steadily increasing, which may affect prices for physician services. We assessed the relationship in 2010 between physician competition and prices paid by private preferred provider organizations for fifteen common, high-cost procedures to understand whether higher concentration of physician practices and accompanying increased market power were associated with higher prices for services. Using county-level measures of the concentration of physician practices and county average prices, and statistically controlling for a range of other regional characteristics, we found that physician practice concentration and prices were significantly associated for twelve of the fifteen procedures we studied. For these procedures, counties with the highest average physician concentrations had prices 8-26 percent higher than prices in the lowest counties. We concluded that physician competition is frequently associated with prices. Policies that would influence physician practice organization should take this into consideration. Project HOPE—The People-to-People Health Foundation, Inc.

Impact of Resident Surgeons on Procedure Length based on Common Pediatric Otolaryngology Cases

Science.gov (United States)

Puram, Sidharth V.; Kozin, Elliott D.; Sethi, Rosh; Alkire, Blake; Lee, Daniel J.; Gray, Stacey T.; Shrime, Mark G.; Cohen, Michael

2015-01-01

Background Surgical education remains an important mission of academic medical centers. Financial pressures, however, may favor improved operating room (OR) efficiency at the expense of surgical education. We aim to characterize resident impact on the duration of procedural time using common pediatric otolaryngologic cases which do not necessitate a surgical assistant and assess whether other factors modify the extent to which residents impact OR efficiency. Study Design We retrospectively reviewed resident and attending surgeon total OR and procedural times for isolated tonsillectomy, adenoidectomy, tonsillectomy with adenoidectomy (T&A) and bilateral myringotomy with tube insertion between 2009 and 2013. We included cases supervised or performed by one of four teaching surgeons in children with ASA otolaryngology procedures. While residents may increase operative times, addressing other system-wide issues may decrease impact of time needed for education and added efficiencies of resident participation may exist throughout the perioperative period. Our model is applicable to surgical education across specialties. Level of Evidence 4 PMID:25251257

Radiation protection in dentistry. Recommended safety procedures for the use of dental x-ray equipment. Safety code 30

International Nuclear Information System (INIS)

1994-01-01

The Radiation Protection Bureau has prepared a series of documents on safety codes to set out requirements for the safe use of radiation-emitting equipment. This Safety Code has been prepared to provide specific guidance to the dentist, dental hygienist, dental assistant and other support personnel concerned with safety procedures and equipment performance. Dental radiography is one of the most valuable tools used in modern dental health care. It makes possible the diagnosis of physical conditions that would otherwise be difficult to identify. The use of dental radiological procedures must be carefully managed, because x-radiation has the potential for damaging healthy cells and tissues. Although no known occurrence of cancer or genetic damage has been observed from radiation doses delivered in modern dentistry, and until more evidence is available, one should practice radiation hygiene with the same care as would be dictated if a hazard were known to exist. The aim of radiation protection in dentistry is to obtain the desired clinical information with minimal radiation exposure to patients, dental personnel and the public. 15 tabs

Radiation protection in dentistry. Recommended safety procedures for the use of dental x-ray equipment. Safety code 30

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

The Radiation Protection Bureau has prepared a series of documents on safety codes to set out requirements for the safe use of radiation-emitting equipment. This Safety Code has been prepared to provide specific guidance to the dentist, dental hygienist, dental assistant and other support personnel concerned with safety procedures and equipment performance. Dental radiography is one of the most valuable tools used in modern dental health care. It makes possible the diagnosis of physical conditions that would otherwise be difficult to identify. The use of dental radiological procedures must be carefully managed, because x-radiation has the potential for damaging healthy cells and tissues. Although no known occurrence of cancer or genetic damage has been observed from radiation doses delivered in modern dentistry, and until more evidence is available, one should practice radiation hygiene with the same care as would be dictated if a hazard were known to exist. The aim of radiation protection in dentistry is to obtain the desired clinical information with minimal radiation exposure to patients, dental personnel and the public. 15 tabs.

Design criteria and pressure vessel codes - an American view

International Nuclear Information System (INIS)

Tuppeny, W.H.

1975-01-01

To the pressure vessel designer, codes and criteria represent the common ground where the stress analyst and the metallurgist must interact and evolve rules and procedures which will ensure safety and open-ended responsiveness to technological, economic, and environmental change. The paper briefly discusses the evolution and rationale behind the current ASME code sections -emphasizing those portions applicable to designs operating in the creep range. The author then proposes a plan of action so that the analysts and materials people can make optimum use of time and resources, and evolve data and design criteria which will be responsive to changing technology and the economic and safety requirements of the future. (author)

The archaeology of computer codes - illustrated on the basis of the code SABINE

International Nuclear Information System (INIS)

Sdouz, G.

1987-02-01

Computer codes used by the physics group of the Institute for Reactor Safety are stored on back-up-tapes. However during the last years both the computer and the system have been changed. For new tasks these programmes have to be available. A new procedure is necessary to find and to activate a stored programme. This procedure is illustrated on the basis of the code SABINE. (Author)

GATO: an MHD stability code for axisymmetric plasmas with internal separatrices

International Nuclear Information System (INIS)

Bernard, L.C.; Helton, F.J.; Moore, R.W.

1981-07-01

The GATO code computes the growth rate of ideal magnetohydrodynamic instabilities in axisymmetric geometries with internal separatrices such as doublet and expanded spheromak. The basic method, which uses a variational principle and a Galerkin procedure to obtain a matrix eigenvalue problem, is common to the ERATO and PEST codes. A new coordinate system has been developed to handle the internal separatrix. Efficient algorithms have been developed to solve the matrix eigenvalue problem for matrices of rank as large as 40,000. Further improvement is expected using graph theoretical techniques to reorder the matrices. Using judicious mesh repartition, the marginal point can be determined with great precision. The code has been extensively used to optimize doublet and general tokamak plasmas

The Conciliation in the State Demands as an Alternative for the Economy in the Process in New Civil Procedure Code

Directory of Open Access Journals (Sweden)

Eduardo Augusto Salomão Camb

2016-12-01

Full Text Available The present study deals with the possibility of conciliation in the demands that involve the Public Power, having as main objective the procedural economy, both as regards the faster process, as to reduction of expenses with the structure of the Judiciary. Despite of the unavailability of the public interest, seeks out the adequacy of this principle with the principles in the New Civil Procedure Code, which encourages conciliation as a means of settling disputes.

A neutron spectrum unfolding code based on iterative procedures

International Nuclear Information System (INIS)

Ortiz R, J. M.; Vega C, H. R.

2012-10-01

In this work, the version 3.0 of the neutron spectrum unfolding code called Neutron Spectrometry and Dosimetry from Universidad Autonoma de Zacatecas (NSDUAZ), is presented. This code was designed in a graphical interface under the LabVIEW programming environment and it is based on the iterative SPUNIT iterative algorithm, using as entrance data, only the rate counts obtained with 7 Bonner spheres based on a 6 Lil(Eu) neutron detector. The main features of the code are: it is intuitive and friendly to the user; it has a programming routine which automatically selects the initial guess spectrum by using a set of neutron spectra compiled by the International Atomic Energy Agency. Besides the neutron spectrum, this code calculates the total flux, the mean energy, H(10), h(10), 15 dosimetric quantities for radiation protection porpoises and 7 survey meter responses, in four energy grids, based on the International Atomic Energy Agency compilation. This code generates a full report in html format with all relevant information. In this work, the neutron spectrum of a 241 AmBe neutron source on air, located at 150 cm from detector, is unfolded. (Author)

Code of conduct for scientists (abstract)

International Nuclear Information System (INIS)

Khurshid, S.J.

2011-01-01

The emergence of advanced technologies in the last three decades and extraordinary progress in our knowledge on the basic Physical, Chemical and Biological properties of living matter has offered tremendous benefits to human beings but simultaneously highlighted the need of higher awareness and responsibility by the scientists of 21 century. Scientist is not born with ethics, nor science is ethically neutral, but there are ethical dimensions to scientific work. There is need to evolve an appropriate Code of Conduct for scientist particularly working in every field of Science. However, while considering the contents, promulgation and adaptation of Codes of Conduct for Scientists, a balance is needed to be maintained between freedom of scientists and at the same time some binding on them in the form of Code of Conducts. The use of good and safe laboratory procedures, whether, codified by law or by common practice must also be considered as part of the moral duties of scientists. It is internationally agreed that a general Code of Conduct can't be formulated for all the scientists universally, but there should be a set of 'building blocks' aimed at establishing the Code of Conduct for Scientists either as individual researcher or responsible for direction, evaluation, monitoring of scientific activities at the institutional or organizational level. (author)

A procedure for solving the neutron diffusion equation on a parallel micro-processor; modifications to the nodal expansion codes RECNEC and HEXNEC to implement the procedure

International Nuclear Information System (INIS)

Putney, J.M.

1983-05-01

The characteristics of a simple parallel micro-processor (PMP) are reviewed and its software requirements discussed. One of the more immediate applications is the multi-spatial simulation of a nuclear reactor station. This is of particular interest because 3D reactor simulation might then be possible as part of operating procedure for PFR and CDFR. A major part of a multi-spatial reactor simulator is the solution of the neutron diffusion equation. A procedure is described for solving the equation on a PMP, which is applied to the nodal expansion method with modifications to the nodal expansion codes RECNEC and HEXNEC. Estimations of the micro-processor requirements for the simulation of both PFR and CDFR are given. (U.K.)

A Quantitative Analysis of the Relationship between Medicare Payment and Service Volume for Glaucoma Procedures from 2005 through 2009.

Science.gov (United States)

Gong, Dan; Jun, Lin; Tsai, James C

2015-05-01

To calculate the association between Medicare payment and service volume for 6 commonly performed glaucoma procedures. Retrospective, longitudinal database study. A 100% dataset of all glaucoma procedures performed on Medicare Part B beneficiaries within the United States from 2005 to 2009. Fixed-effects regression model using Medicare Part B carrier data for all 50 states and the District of Columbia, controlling for time-invariant carrier-specific characteristics, national trends in glaucoma service volume, Medicare beneficiary population, number of ophthalmologists, and income per capita. Payment-volume elasticities, defined as the percent change in service volume per 1% change in Medicare payment, for laser trabeculoplasty (Current Procedural Terminology [CPT] code 65855), trabeculectomy without previous surgery (CPT code 66170), trabeculectomy with previous surgery (CPT code 66172), aqueous shunt to reservoir (CPT code 66180), laser iridotomy (CPT code 66761), and scleral reinforcement with graft (CPT code 67255). The payment-volume elasticity was nonsignificant for 4 of 6 procedures studied: laser trabeculoplasty (elasticity, -0.27; 95% confidence interval [CI], -1.31 to 0.77; P = 0.61), trabeculectomy without previous surgery (elasticity, -0.42; 95% CI, -0.85 to 0.01; P = 0.053), trabeculectomy with previous surgery (elasticity, -0.28; 95% CI, -0.83 to 0.28; P = 0.32), and aqueous shunt to reservoir (elasticity, -0.47; 95% CI, -3.32 to 2.37; P = 0.74). Two procedures yielded significant associations between Medicare payment and service volume. For laser iridotomy, the payment-volume elasticity was -1.06 (95% CI, -1.39 to -0.72; P payment, laser iridotomy service volume increased by 1.06%. For scleral reinforcement with graft, the payment-volume elasticity was -2.92 (95% CI, -5.72 to -0.12; P = 0.041): for every 1% decrease in CPT code 67255 payment, scleral reinforcement with graft service volume increased by 2.92%. This study calculated the association

Coding in Muscle Disease.

Science.gov (United States)

Jones, Lyell K; Ney, John P

2016-12-01

Accurate coding is critically important for clinical practice and research. Ongoing changes to diagnostic and billing codes require the clinician to stay abreast of coding updates. Payment for health care services, data sets for health services research, and reporting for medical quality improvement all require accurate administrative coding. This article provides an overview of administrative coding for patients with muscle disease and includes a case-based review of diagnostic and Evaluation and Management (E/M) coding principles in patients with myopathy. Procedural coding for electrodiagnostic studies and neuromuscular ultrasound is also reviewed.

Common coding of auditory and visual spatial information in working memory.

Science.gov (United States)

Lehnert, Günther; Zimmer, Hubert D

2008-09-16

We compared spatial short-term memory for visual and auditory stimuli in an event-related slow potentials study. Subjects encoded object locations of either four or six sequentially presented auditory or visual stimuli and maintained them during a retention period of 6 s. Slow potentials recorded during encoding were modulated by the modality of the stimuli. Stimulus related activity was stronger for auditory items at frontal and for visual items at posterior sites. At frontal electrodes, negative potentials incrementally increased with the sequential presentation of visual items, whereas a strong transient component occurred during encoding of each auditory item without the cumulative increment. During maintenance, frontal slow potentials were affected by modality and memory load according to task difficulty. In contrast, at posterior recording sites, slow potential activity was only modulated by memory load independent of modality. We interpret the frontal effects as correlates of different encoding strategies and the posterior effects as a correlate of common coding of visual and auditory object locations.

Reading your own lips: common-coding theory and visual speech perception.

Science.gov (United States)

Tye-Murray, Nancy; Spehar, Brent P; Myerson, Joel; Hale, Sandra; Sommers, Mitchell S

2013-02-01

Common-coding theory posits that (1) perceiving an action activates the same representations of motor plans that are activated by actually performing that action, and (2) because of individual differences in the ways that actions are performed, observing recordings of one's own previous behavior activates motor plans to an even greater degree than does observing someone else's behavior. We hypothesized that if observing oneself activates motor plans to a greater degree than does observing others, and if these activated plans contribute to perception, then people should be able to lipread silent video clips of their own previous utterances more accurately than they can lipread video clips of other talkers. As predicted, two groups of participants were able to lipread video clips of themselves, recorded more than two weeks earlier, significantly more accurately than video clips of others. These results suggest that visual input activates speech motor activity that links to word representations in the mental lexicon.

Surgical specialty procedures in rural surgery practices: implications for rural surgery training.

Science.gov (United States)

Sticca, Robert P; Mullin, Brady C; Harris, Joel D; Hosford, Clint C

2012-12-01

Specialty procedures constitute one eighth of rural surgery practice. Currently, general surgeons intending to practice in rural hospitals may not get adequate training for specialty procedures, which they will be expected to perform. Better definition of these procedures will help guide rural surgery training. Current Procedural Terminology codes for all surgical procedures for 81% of North Dakota and South Dakota rural surgeons were entered into the Dakota Database for Rural Surgery. Specialty procedures were analyzed and compared with the Surgical Council on Resident Education curriculum to determine whether general surgery training is adequate preparation for rural surgery practice. The Dakota Database for Rural Surgery included 46,052 procedures, of which 5,666 (12.3%) were specialty procedures. Highest volume specialty categories included vascular, obstetrics and gynecology, orthopedics, cardiothoracic, urology, and otolaryngology. Common procedures in cardiothoracic and vascular surgery are taught in general surgical residency, while common procedures in obstetrics and gynecology, orthopedics, urology, and otolaryngology are usually not taught in general surgery training. Optimal training for rural surgery practice should include experience in specialty procedures in obstetrics and gynecology, orthopedics, urology, and otolaryngology. Copyright © 2012 Elsevier Inc. All rights reserved.

Automatic coding method of the ACR Code

International Nuclear Information System (INIS)

Park, Kwi Ae; Ihm, Jong Sool; Ahn, Woo Hyun; Baik, Seung Kook; Choi, Han Yong; Kim, Bong Gi

1993-01-01

The authors developed a computer program for automatic coding of ACR(American College of Radiology) code. The automatic coding of the ACR code is essential for computerization of the data in the department of radiology. This program was written in foxbase language and has been used for automatic coding of diagnosis in the Department of Radiology, Wallace Memorial Baptist since May 1992. The ACR dictionary files consisted of 11 files, one for the organ code and the others for the pathology code. The organ code was obtained by typing organ name or code number itself among the upper and lower level codes of the selected one that were simultaneous displayed on the screen. According to the first number of the selected organ code, the corresponding pathology code file was chosen automatically. By the similar fashion of organ code selection, the proper pathologic dode was obtained. An example of obtained ACR code is '131.3661'. This procedure was reproducible regardless of the number of fields of data. Because this program was written in 'User's Defined Function' from, decoding of the stored ACR code was achieved by this same program and incorporation of this program into program in to another data processing was possible. This program had merits of simple operation, accurate and detail coding, and easy adjustment for another program. Therefore, this program can be used for automation of routine work in the department of radiology

IVA3: Computer code for modelling of transient three dimensional three phase flow in complicated geometry

International Nuclear Information System (INIS)

Kolev, N.I.

1991-12-01

This report describes the input and output ov IVA3 computer code and the procedure how to compile, link, and run the code. The common blocs recorded for restarts files and post processing are described in detail as well as the IVA3 interface for thermodynamic and thermo physical properties. Some recommendations for the input preparation together with some detailed comments on some architectural and functional features of the code are given in order to give some insight of the caused actions by changing some control parameters. (orig.) [de

Critical Care Coding for Neurologists.

Science.gov (United States)

Nuwer, Marc R; Vespa, Paul M

2015-10-01

Accurate coding is an important function of neurologic practice. This contribution to Continuum is part of an ongoing series that presents helpful coding information along with examples related to the issue topic. Tips for diagnosis coding, Evaluation and Management coding, procedure coding, or a combination are presented, depending on which is most applicable to the subject area of the issue.

Coding in pigeons: Multiple-coding versus single-code/default strategies.

Science.gov (United States)

Pinto, Carlos; Machado, Armando

2015-05-01

To investigate the coding strategies that pigeons may use in a temporal discrimination tasks, pigeons were trained on a matching-to-sample procedure with three sample durations (2s, 6s and 18s) and two comparisons (red and green hues). One comparison was correct following 2-s samples and the other was correct following both 6-s and 18-s samples. Tests were then run to contrast the predictions of two hypotheses concerning the pigeons' coding strategies, the multiple-coding and the single-code/default. According to the multiple-coding hypothesis, three response rules are acquired, one for each sample. According to the single-code/default hypothesis, only two response rules are acquired, one for the 2-s sample and a "default" rule for any other duration. In retention interval tests, pigeons preferred the "default" key, a result predicted by the single-code/default hypothesis. In no-sample tests, pigeons preferred the key associated with the 2-s sample, a result predicted by multiple-coding. Finally, in generalization tests, when the sample duration equaled 3.5s, the geometric mean of 2s and 6s, pigeons preferred the key associated with the 6-s and 18-s samples, a result predicted by the single-code/default hypothesis. The pattern of results suggests the need for models that take into account multiple sources of stimulus control. © Society for the Experimental Analysis of Behavior.

HCPCS Coding: An Integral Part of Your Reimbursement Strategy.

Science.gov (United States)

Nusgart, Marcia

2013-12-01

The first step to a successful reimbursement strategy is to ensure that your wound care product has the most appropriate Healthcare Common Procedure Coding System (HCPCS) code (or billing) for your product. The correct HCPCS code plays an essential role in patient access to new and existing technologies. When devising a strategy to obtain a HCPCS code for its product, companies must consider a number of factors as follows: (1) Has the product gone through the Food and Drug Administration (FDA) regulatory process or does it need to do so? Will the FDA code designation impact which HCPCS code will be assigned to your product? (2) In what "site of service" do you intend to market your product? Where will your customers use the product? Which coding system (CPT ® or HCPCS) applies to your product? (3) Does a HCPCS code for a similar product already exist? Does your product fit under the existing HCPCS code? (4) Does your product need a new HCPCS code? What is the linkage, if any, between coding, payment, and coverage for the product? Researchers and companies need to start early and place the same emphasis on a reimbursement strategy as it does on a regulatory strategy. Your reimbursement strategy staff should be involved early in the process, preferably during product research and development and clinical trial discussions.

Incorporating mesh-insensitive structural stress into the fatigue assessment procedure of common structural rules for bulk carriers

Directory of Open Access Journals (Sweden)

Seong-Min Kim

2015-01-01

Full Text Available This study introduces a fatigue assessment procedure using mesh-insensitive structural stress method based on the Common Structural Rules for Bulk Carriers by considering important factors, such as mean stress and thickness effects. The fatigue assessment result of mesh-insensitive structural stress method have been compared with CSR procedure based on equivalent notch stress at major hot spot points in the area near the ballast hold for a 180 K bulk carrier. The possibility of implementing mesh-insensitive structural stress method in the fatigue assessment procedure for ship structures is discussed.

GATO: An MHD stability code for axisymmetric plasmas with internal separatrices

International Nuclear Information System (INIS)

Bernard, L.C.; Helton, F.J.; Moore, R.W.

1981-01-01

The GATO code computes the growth rate of ideal magnetohydrodynamic instabilities in axisymmetric geometries with internal separatrices such as doublet and expanded spheromak. The basic method, which uses a variational principle and a Galerkin procedure to obtain a matrix eigenvalue problem, is common to the ERATO and PEST codes. A new coordinate system has been developed to handle the internal separatrix. Efficient algorithms have been developed to solve the matrix eigenvalue problem for matrices of rank as large as 40 000. Further improvement is expected using graph theoretical techniques to reorder the matrices. Using judicious mesh repartition, the marginal point can be determined with great precision. The code has been extensively used to optimize doublet and general tokamak plasmas. (orig.)

Using Coding Apps to Support Literacy Instruction and Develop Coding Literacy

Science.gov (United States)

Hutchison, Amy; Nadolny, Larysa; Estapa, Anne

2016-01-01

In this article the authors present the concept of Coding Literacy and describe the ways in which coding apps can support the development of Coding Literacy and disciplinary and digital literacy skills. Through detailed examples, we describe how coding apps can be integrated into literacy instruction to support learning of the Common Core English…

Application of Quantum Gauss-Jordan Elimination Code to Quantum Secret Sharing Code

Science.gov (United States)

Diep, Do Ngoc; Giang, Do Hoang; Phu, Phan Huy

2018-03-01

The QSS codes associated with a MSP code are based on finding an invertible matrix V, solving the system vATMB (s a)=s. We propose a quantum Gauss-Jordan Elimination Procedure to produce such a pivotal matrix V by using the Grover search code. The complexity of solving is of square-root order of the cardinal number of the unauthorized set √ {2^{|B|}}.

Uncommon combinations of ICD10-PCS or ICD-9-CM operative procedure codes account for most inpatient surgery at half of Texas hospitals.

Science.gov (United States)

O'Neill, Liam; Dexter, Franklin; Park, Sae-Hwan; Epstein, Richard H

2017-09-01

Recently, there has been interest in activity-based cost accounting for inpatient surgical procedures to facilitate "value based" analyses. Research 10-20years ago, performed using data from 3 large teaching hospitals, found that activity-based cost accounting was practical and useful for modeling surgeons and subspecialties, but inaccurate for individual procedures. We hypothesized that these older results would apply to hundreds of hospitals, currently evaluable using administrative databases. Observational study. State of Texas hospital discharge abstract data for 1st quarter of 2016, 4th quarter of 2015, 1st quarter of 2015, and 4th quarter of 2014. Discharged from an acute care hospital in Texas with at least 1 major therapeutic ("operative") procedure. Counts of discharges for each procedure or combination of procedures, classified by ICD-10-PCS or ICD-9-CM. At the average hospital, most surgical discharges were for procedures performed at most once a month at the hospital (54%, 95% confidence interval [CI] 51% to 55%). At the average hospital, approximately 90% of procedures were performed at most once a month at the hospital (93%, CI 93% to 94%). The percentages were insensitive to the quarter of the year. The percentages were 3% to 6% greater with ICD-10-PCS than for the superseded ICD 9 CM. There are many different procedure codes, and many different combinations of codes, relative to the number of different hospital discharges. Since most procedures at most hospitals are performed no more than once a month, activity-based cost accounting with a sample size sufficient to be useful is impractical for the vast majority of procedures, in contrast to analysis by surgeon and/or subspecialty. Copyright © 2017 Elsevier Inc. All rights reserved.

A method for modeling co-occurrence propensity of clinical codes with application to ICD-10-PCS auto-coding.

Science.gov (United States)

Subotin, Michael; Davis, Anthony R

2016-09-01

Natural language processing methods for medical auto-coding, or automatic generation of medical billing codes from electronic health records, generally assign each code independently of the others. They may thus assign codes for closely related procedures or diagnoses to the same document, even when they do not tend to occur together in practice, simply because the right choice can be difficult to infer from the clinical narrative. We propose a method that injects awareness of the propensities for code co-occurrence into this process. First, a model is trained to estimate the conditional probability that one code is assigned by a human coder, given than another code is known to have been assigned to the same document. Then, at runtime, an iterative algorithm is used to apply this model to the output of an existing statistical auto-coder to modify the confidence scores of the codes. We tested this method in combination with a primary auto-coder for International Statistical Classification of Diseases-10 procedure codes, achieving a 12% relative improvement in F-score over the primary auto-coder baseline. The proposed method can be used, with appropriate features, in combination with any auto-coder that generates codes with different levels of confidence. The promising results obtained for International Statistical Classification of Diseases-10 procedure codes suggest that the proposed method may have wider applications in auto-coding. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Lung volumes: measurement, clinical use, and coding.

Science.gov (United States)

Flesch, Judd D; Dine, C Jessica

2012-08-01

Measurement of lung volumes is an integral part of complete pulmonary function testing. Some lung volumes can be measured during spirometry; however, measurement of the residual volume (RV), functional residual capacity (FRC), and total lung capacity (TLC) requires special techniques. FRC is typically measured by one of three methods. Body plethysmography uses Boyle's Law to determine lung volumes, whereas inert gas dilution and nitrogen washout use dilution properties of gases. After determination of FRC, expiratory reserve volume and inspiratory vital capacity are measured, which allows the calculation of the RV and TLC. Lung volumes are commonly used for the diagnosis of restriction. In obstructive lung disease, they are used to assess for hyperinflation. Changes in lung volumes can also be seen in a number of other clinical conditions. Reimbursement for measurement of lung volumes requires knowledge of current procedural terminology (CPT) codes, relevant indications, and an appropriate level of physician supervision. Because of recent efforts to eliminate payment inefficiencies, the 10 previous CPT codes for lung volumes, airway resistance, and diffusing capacity have been bundled into four new CPT codes.

Results from the Veterans Health Administration ICD-10-CM/PCS Coding Pilot Study.

Science.gov (United States)

Weems, Shelley; Heller, Pamela; Fenton, Susan H

2015-01-01

The Veterans Health Administration (VHA) of the US Department of Veterans Affairs has been preparing for the October 1, 2015, conversion to the International Classification of Diseases, Tenth Revision, Clinical Modification and Procedural Coding System (ICD-10-CM/PCS) for more than four years. The VHA's Office of Informatics and Analytics ICD-10 Program Management Office established an ICD-10 Learning Lab to explore expected operational challenges. This study was conducted to determine the effects of the classification system conversion on coding productivity. ICD codes are integral to VHA business processes and are used for purposes such as clinical studies, performance measurement, workload capture, cost determination, Veterans Equitable Resource Allocation (VERA) determination, morbidity and mortality classification, indexing of hospital records by disease and operations, data storage and retrieval, research purposes, and reimbursement. The data collection for this study occurred in multiple VHA sites across several months using standardized methods. It is commonly accepted that coding productivity will decrease with the implementation of ICD-10-CM/PCS. The findings of this study suggest that the decrease will be more significant for inpatient coding productivity (64.5 percent productivity decrease) than for ambulatory care coding productivity (6.7 percent productivity decrease). This study reveals the following important points regarding ICD-10-CM/PCS coding productivity: 1. Ambulatory care ICD-10-CM coding productivity is not expected to decrease as significantly as inpatient ICD-10-CM/PCS coding productivity. 2. Coder training and type of record (inpatient versus outpatient) affect coding productivity. 3. Inpatient coding productivity is decreased when a procedure requiring ICD-10-PCS coding is present. It is highly recommended that organizations perform their own analyses to determine the effects of ICD-10-CM/PCS implementation on coding productivity.

Common handling procedures conducted in preclinical safety studies result in minimal hepatic gene expression changes in Sprague-Dawley rats.

Directory of Open Access Journals (Sweden)

Yudong D He

Full Text Available Gene expression profiling is a tool to gain mechanistic understanding of adverse effects in response to compound exposure. However, little is known about how the common handling procedures of experimental animals during a preclinical study alter baseline gene expression. We report gene expression changes in the livers of female Sprague-Dawley rats following common handling procedures. Baseline gene expression changes identified in this study provide insight on how these changes may affect interpretation of gene expression profiles following compound exposure. Rats were divided into three groups. One group was not subjected to handling procedures and served as controls for both handled groups. Animals in the other two groups were weighed, subjected to restraint in Broome restrainers, and administered water via oral gavage daily for 1 or 4 days with tail vein blood collections at 1, 2, 4, and 8 hours postdose on days 1 and 4. Significantly altered genes were identified in livers of animals following 1 or 4 days of handling when compared to the unhandled animals. Gene changes in animals handled for 4 days were similar to those handled for 1 day, suggesting a lack of habituation. The altered genes were primarily immune function related genes. These findings, along with a correlating increase in corticosterone levels suggest that common handling procedures may cause a minor immune system perturbance.

Reactor lattice codes

International Nuclear Information System (INIS)

Kulikowska, T.

1999-01-01

The present lecture has a main goal to show how the transport lattice calculations are realised in a standard computer code. This is illustrated on the example of the WIMSD code, belonging to the most popular tools for reactor calculations. Most of the approaches discussed here can be easily modified to any other lattice code. The description of the code assumes the basic knowledge of reactor lattice, on the level given in the lecture on 'Reactor lattice transport calculations'. For more advanced explanation of the WIMSD code the reader is directed to the detailed descriptions of the code cited in References. The discussion of the methods and models included in the code is followed by the generally used homogenisation procedure and several numerical examples of discrepancies in calculated multiplication factors based on different sources of library data. (author)

Improving the accuracy of operation coding in surgical discharge summaries

Science.gov (United States)

Martinou, Eirini; Shouls, Genevieve; Betambeau, Nadine

2014-01-01

Procedural coding in surgical discharge summaries is extremely important; as well as communicating to healthcare staff which procedures have been performed, it also provides information that is used by the hospital's coding department. The OPCS code (Office of Population, Censuses and Surveys Classification of Surgical Operations and Procedures) is used to generate the tariff that allows the hospital to be reimbursed for the procedure. We felt that the OPCS coding on discharge summaries was often incorrect within our breast and endocrine surgery department. A baseline measurement over two months demonstrated that 32% of operations had been incorrectly coded, resulting in an incorrect tariff being applied and an estimated loss to the Trust of £17,000. We developed a simple but specific OPCS coding table in collaboration with the clinical coding team and breast surgeons that summarised all operations performed within our department. This table was disseminated across the team, specifically to the junior doctors who most frequently complete the discharge summaries. Re-audit showed 100% of operations were accurately coded, demonstrating the effectiveness of the coding table. We suggest that specifically designed coding tables be introduced across each surgical department to ensure accurate OPCS codes are used to produce better quality surgical discharge summaries and to ensure correct reimbursement to the Trust. PMID:26734286

Radiation field distribution within the room for three commonly-used interventional procedures

International Nuclear Information System (INIS)

Liu Changcai; Zhang Lin; Min Nan; Lu Feng; Li Quantai; Deng Daping; Chen Yue; Zhu Jianguo

2014-01-01

Objective: To detect the radiation field distribution within the room for three commonly-used interventional procedures, in order to provide basic data for the radiation protection and safe operation of staff involved in interventional radiology. Methods: The thermoluminescent dosemeters (TLDs) were placed in different points on the horizontal plane around the interventional table and the vertical plane where the staff often stayed. Based on the selected experimental conditions, the TLDs were grouped to be irradiated. After the experiment, the TLDs were measured in the laboratory to calculate the doses of radiation field. Results: Data obtained at the same position followed basically as cardiovascular intervention > cerebrovascular intervention > liver intervention. Intervention of same type at the same position followed as high-dose group > mid-dose group > low-dose group. These results were consistent with the useful beam doses, and proportional to the fluoroscopy time. A few data with exception were due to measurement error or experimental error. Conclusions: Cerebrovascular and liver interventional procedures resulted in the relatively low radiation doses. The radiation doses at the distance of more than 3 m can be negligible. For cardiovascular interventional procedure, with the decrease of the distance from the X-ray tube, the dose decreased. In the radiation field,the operator, the first assistant and second assistant would exposed to higher dose on the standing points while patients receive lower doses in the head and feet direction. (authors)

Coding In-depth Semistructured Interviews

DEFF Research Database (Denmark)

Campbell, John L.; Quincy, Charles; Osserman, Jordan

2013-01-01

Many social science studies are based on coded in-depth semistructured interview transcripts. But researchers rarely report or discuss coding reliability in this work. Nor is there much literature on the subject for this type of data. This article presents a procedure for developing coding schemes...... useful for situations where a single knowledgeable coder will code all the transcripts once the coding scheme has been established. This approach can also be used with other types of qualitative data and in other circumstances....

Fracture flow code

International Nuclear Information System (INIS)

Dershowitz, W; Herbert, A.; Long, J.

1989-03-01

The hydrology of the SCV site will be modelled utilizing discrete fracture flow models. These models are complex, and can not be fully cerified by comparison to analytical solutions. The best approach for verification of these codes is therefore cross-verification between different codes. This is complicated by the variation in assumptions and solution techniques utilized in different codes. Cross-verification procedures are defined which allow comparison of the codes developed by Harwell Laboratory, Lawrence Berkeley Laboratory, and Golder Associates Inc. Six cross-verification datasets are defined for deterministic and stochastic verification of geometric and flow features of the codes. Additional datasets for verification of transport features will be documented in a future report. (13 figs., 7 tabs., 10 refs.) (authors)

Common sense codified

CERN Multimedia

CERN Bulletin

2010-01-01

At CERN, people of more than a hundred different nationalities and hundreds of different professions work together towards a common goal. The new Code of Conduct is a tool that has been designed to help us keep our workplace pleasant and productive through common standards of behaviour. Its basic principle is mutual respect and common sense. This is only natural, but not trivial…  The Director-General announced it in his speech at the beginning of the year, and the Bulletin wrote about it immediately afterwards. "It" is the new Code of Conduct, the document that lists our Organization's values and describes the basic standards of behaviour that we should both adopt and expect from others. "The Code of Conduct is not going to establish new rights or new obligations," explains Anne-Sylvie Catherin, Head of the Human Resources Department (HR). But what it will do is provide a framework for our existing rights and obligations." The aim of a co...

Joint Source-Channel Coding by Means of an Oversampled Filter Bank Code

Directory of Open Access Journals (Sweden)

Marinkovic Slavica

2006-01-01

Full Text Available Quantized frame expansions based on block transforms and oversampled filter banks (OFBs have been considered recently as joint source-channel codes (JSCCs for erasure and error-resilient signal transmission over noisy channels. In this paper, we consider a coding chain involving an OFB-based signal decomposition followed by scalar quantization and a variable-length code (VLC or a fixed-length code (FLC. This paper first examines the problem of channel error localization and correction in quantized OFB signal expansions. The error localization problem is treated as an -ary hypothesis testing problem. The likelihood values are derived from the joint pdf of the syndrome vectors under various hypotheses of impulse noise positions, and in a number of consecutive windows of the received samples. The error amplitudes are then estimated by solving the syndrome equations in the least-square sense. The message signal is reconstructed from the corrected received signal by a pseudoinverse receiver. We then improve the error localization procedure by introducing a per-symbol reliability information in the hypothesis testing procedure of the OFB syndrome decoder. The per-symbol reliability information is produced by the soft-input soft-output (SISO VLC/FLC decoders. This leads to the design of an iterative algorithm for joint decoding of an FLC and an OFB code. The performance of the algorithms developed is evaluated in a wavelet-based image coding system.

Current procedural terminology; a primer.

Science.gov (United States)

Hirsch, Joshua A; Leslie-Mazwi, Thabele M; Nicola, Gregory N; Barr, Robert M; Bello, Jacqueline A; Donovan, William D; Tu, Raymond; Alson, Mark D; Manchikanti, Laxmaiah

2015-04-01

In 1966, The American Medical Association (AMA) working with multiple major medical specialty societies developed an iterative coding system for describing medical procedures and services using uniform language, the Current Procedural Terminology (CPT) system. The current code set, CPT IV, forms the basis of reporting most of the services performed by healthcare providers, physicians and non-physicians as well as facilities allowing effective, reliable communication among physician and other providers, third parties and patients. This coding system and its maintenance has evolved significantly since its inception, and now goes well beyond its readily perceived role in reimbursement. Additional roles include administrative management, tracking new and investigational procedures, and evolving aspects of 'pay for performance'. The system also allows for local, regional and national utilization comparisons for medical education and research. Neurointerventional specialists use CPT category I codes regularly--for example, 36,215 for first-order cerebrovascular angiography, 36,216 for second-order vessels, and 37,184 for acute stroke treatment by mechanical means. Additionally, physicians add relevant modifiers to the CPT codes, such as '-26' to indicate 'professional charge only,' or '-59' to indicate a distinct procedural service performed on the same day. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Audit of Clinical Coding of Major Head and Neck Operations

Science.gov (United States)

Mitra, Indu; Malik, Tass; Homer, Jarrod J; Loughran, Sean

2009-01-01

INTRODUCTION Within the NHS, operations are coded using the Office of Population Censuses and Surveys (OPCS) classification system. These codes, together with diagnostic codes, are used to generate Healthcare Resource Group (HRG) codes, which correlate to a payment bracket. The aim of this study was to determine whether allocated procedure codes for major head and neck operations were correct and reflective of the work undertaken. HRG codes generated were assessed to determine accuracy of remuneration. PATIENTS AND METHODS The coding of consecutive major head and neck operations undertaken in a tertiary referral centre over a retrospective 3-month period were assessed. Procedure codes were initially ascribed by professional hospital coders. Operations were then recoded by the surgical trainee in liaison with the head of clinical coding. The initial and revised procedure codes were compared and used to generate HRG codes, to determine whether the payment banding had altered. RESULTS A total of 34 cases were reviewed. The number of procedure codes generated initially by the clinical coders was 99, whereas the revised codes generated 146. Of the original codes, 47 of 99 (47.4%) were incorrect. In 19 of the 34 cases reviewed (55.9%), the HRG code remained unchanged, thus resulting in the correct payment. Six cases were never coded, equating to £15,300 loss of payment. CONCLUSIONS These results highlight the inadequacy of this system to reward hospitals for the work carried out within the NHS in a fair and consistent manner. The current coding system was found to be complicated, ambiguous and inaccurate, resulting in loss of remuneration. PMID:19220944

Code of practice against radiation hazards at PINSTECH

International Nuclear Information System (INIS)

Mubarak, M.A.; Javed, M.; Ahmad, S.

1982-10-01

It is the radiation safety policy of PAEC/PINSTECH that all radiation exposure should be kept as low as reasonably achievable (ALARA). A code of practice against radiation hazards at PINSTECH was written in 1972 which regulated the conduct of radiation work at PINSTECH. Since the radiation work at PINSTECH has greatly increased, it was considered necessary to revise the code so as to incorporate the new concepts in this field as well as to help meet the present requirements of radiation protection. The procedures set forth in this code are mandatory and in no case should any of them be deviated except under an emergency situation which may be handled according to procedures laid down in a separate manual ''Emergency Procedures at PARR-PINSTECH'' (PINSTECH/HP--19). All those supervising or performing any kind of radiation work are required to study and adhere to these procedures. Copy of this code should be kept in every radiation laboratory for ready reference. (author)

Controversy over Issue Preclusion in Russia’s Criminal Procedure: Can Common Law Offer a Solution?

Directory of Open Access Journals (Sweden)

Yury Rovnov

2015-01-01

Full Text Available Even though Russia’s new Code of Criminal Procedure of 2001 had from the very beginning contained the article titled ‘Preclusive Effects,’ it was not until a decision by the Constitutional Court of 2008 that the doctrine of issue preclusion was, in its proper sense, reinstated in Russian criminal law, barring facts definitively established in a civil trial from relitigation in criminal proceedings. Despite heavy criticism that came down on the Constitutional Court for what was seen by law enforcement agents as unwarranted judicial activism, the Russian Parliament soon amended the article in line with the interpretation offered by the Court. This, however, did not end the controversy as critics raised a valid point: an automatic transfer of facts from civil proceedings with a priori more lenient requirements of proof is likely to distort outcomes, harming defendants, the prosecution, and, ultimately, societal interests. This article will turn for apotential solution to common law, which has been able to avoid this problem by clearly distinguishing between different standards of proof applicable in civil v. criminal litigations. It will be shown, using the United States as an example, how courts can effectively use issue preclusion to pursue a number of legitimate objectives, such as consistency of judgments and judicial economy, with due account for the interests of parties in proceedings. At the same time, issue preclusion appears an inappropriate and ineffective means to combat arbitrariness of the judiciary – the end which Russia’s Constitutional Court and law makers arguably had in mind when introducing the doctrine into Russian law.

Student and intern awareness of ionising radiation exposure from common diagnostic imaging procedures

International Nuclear Information System (INIS)

Zhou, G. Z.; Wong, D. D.; Nguyen, L. K.; Mendelson, R. M.

2010-01-01

Full text: This study aims to evaluate medical student and intern awareness of ionising radiation exposure from common diagnostic imaging procedures and to suggest how education could be improved. Fourth to sixth year medical students enrolled at a Western Australian university and interns from three teaching hospitals in Perth were recruited. Participants were asked to complete a questionnaire consisting of 26 questions on their background, knowledge of ionising radiation doses and learning preferences for future teaching on this subject. A total of 331 completed questionnaires were received (95.9%). Of the 17 questions assessing knowledge of ionising radiation, a mean score of 6.0 was obtained by respondents (95% CI 5.8-6.2). Up to 54.8% of respondents underestimated the radiation dose from commonly requested radiological procedures. Respondents (11.3 and 25.5%) incorrectly believed that ultrasound and MRI emit ionising radiation, respectively. Of the four subgroups of respondents, the intern doctor subgroup performed significantly better (mean score 6.9, P< 0.0001, 95% CI 6.5-7.3) than each of the three medical student subgroups. When asked for the preferred method of teaching for future radiation awareness, a combination of lectures, tutorials and workshops was preferred. This study has clearly shown that awareness of ionising radiation from diagnostic imaging is lacking among senior medical students and interns. The results highlight the need for improved education to minimise unnecessary exposure of patients and the community to radiation. Further studies are required to determine the most effective form of education.

An analysis of options available for developing a common laser ray tracing package for Ares and Kull code frameworks

Energy Technology Data Exchange (ETDEWEB)

Weeratunga, S K

2008-11-06

Ares and Kull are mature code frameworks that support ALE hydrodynamics for a variety of HEDP applications at LLNL, using two widely different meshing approaches. While Ares is based on a 2-D/3-D block-structured mesh data base, Kull is designed to support unstructured, arbitrary polygonal/polyhedral meshes. In addition, both frameworks are capable of running applications on large, distributed-memory parallel machines. Currently, both these frameworks separately support assorted collections of physics packages related to HEDP, including one for the energy deposition by laser/ion-beam ray tracing. This study analyzes the options available for developing a common laser/ion-beam ray tracing package that can be easily shared between these two code frameworks and concludes with a set of recommendations for its development.

A Semantic Analysis Method for Scientific and Engineering Code

Science.gov (United States)

Stewart, Mark E. M.

1998-01-01

This paper develops a procedure to statically analyze aspects of the meaning or semantics of scientific and engineering code. The analysis involves adding semantic declarations to a user's code and parsing this semantic knowledge with the original code using multiple expert parsers. These semantic parsers are designed to recognize formulae in different disciplines including physical and mathematical formulae and geometrical position in a numerical scheme. In practice, a user would submit code with semantic declarations of primitive variables to the analysis procedure, and its semantic parsers would automatically recognize and document some static, semantic concepts and locate some program semantic errors. A prototype implementation of this analysis procedure is demonstrated. Further, the relationship between the fundamental algebraic manipulations of equations and the parsing of expressions is explained. This ability to locate some semantic errors and document semantic concepts in scientific and engineering code should reduce the time, risk, and effort of developing and using these codes.

Reliability-Based Code Calibration

DEFF Research Database (Denmark)

Faber, M.H.; Sørensen, John Dalsgaard

2003-01-01

The present paper addresses fundamental concepts of reliability based code calibration. First basic principles of structural reliability theory are introduced and it is shown how the results of FORM based reliability analysis may be related to partial safety factors and characteristic values....... Thereafter the code calibration problem is presented in its principal decision theoretical form and it is discussed how acceptable levels of failure probability (or target reliabilities) may be established. Furthermore suggested values for acceptable annual failure probabilities are given for ultimate...... and serviceability limit states. Finally the paper describes the Joint Committee on Structural Safety (JCSS) recommended procedure - CodeCal - for the practical implementation of reliability based code calibration of LRFD based design codes....

Procedure for marking, encryption, labelling and optical coding

OpenAIRE

Barranco, Ángel; Rodríguez-González, Agustín; Sánchez Valencia, Juan Ramón; Aparicio, Francisco J.; Blaszczyk-Lezak, Iwona Krystina; Holgado Bolaños, Miguel; Casquel del Campo, Rafael; Ocaña, J. L.; Molpeceres, C.; García-Ballesteros Ramírez, Juan José; Morales Furió, Miguel

2009-01-01

[EN] It permits marking or recording motifs (301) on surfaces whereon there has been deposited previously a fluorescent polymer layer (300) through a procedure of plasma polymerisation (100) of molecules of a colourant. The procedure combines the special characteristics of the polymer layers making them suitable for being capable of recording diverse motifs (301) thereon, and the possibility of recording by laser (10 1) or other techniques. Among such characteristics s...

The New Reflections on Civil Procedure Code Notary Services and Registration Forms and Consensus of Conflict Settlement

Directory of Open Access Journals (Sweden)

Sérgio Henriques Zandona Freitas

2016-06-01

Full Text Available This scientific paper studies alternative means of dispute resolution, such as effective measures to achieve social peace and relieve the judiciary, the role of notaries and registrars. Institutes such as conciliation and mediation were prestigious in the New Code of Civil Procedure, being essential to the effectiveness of the constitutional process and the state of democratic rights, once they have impact on fundamental rights. Will be adopted, as a theoretical framework, the Constitutionalist process Theory, the work of José Alfredo de Oliveira Baracho. As the foundation and success of this study we have the literature and deductive method.

Audit of accuracy of clinical coding in oral surgery.

Science.gov (United States)

Naran, S; Hudovsky, A; Antscherl, J; Howells, S; Nouraei, S A R

2014-10-01

We aimed to study the accuracy of clinical coding within oral surgery and to identify ways in which it can be improved. We undertook did a multidisciplinary audit of a sample of 646 day case patients who had had oral surgery procedures between 2011 and 2012. We compared the codes given with their case notes and amended any discrepancies. The accuracy of coding was assessed for primary and secondary diagnoses and procedures, and for health resource groupings (HRGs). The financial impact of coding Subjectivity, Variability and Error (SVE) was assessed by reference to national tariffs. The audit resulted in 122 (19%) changes to primary diagnoses. The codes for primary procedures changed in 224 (35%) cases; 310 (48%) morbidities and complications had been missed, and 266 (41%) secondary procedures had been missed or were incorrect. This led to at least one change of coding in 496 (77%) patients, and to the HRG changes in 348 (54%) patients. The financial impact of this was £114 in lost revenue per patient. There is a high incidence of coding errors in oral surgery because of the large number of day cases, a lack of awareness by clinicians of coding issues, and because clinical coders are not always familiar with the large number of highly specialised abbreviations used. Accuracy of coding can be improved through the use of a well-designed proforma, and standards can be maintained by the use of an ongoing data quality assurance programme. Copyright © 2014. Published by Elsevier Ltd.

Transport theory and codes

International Nuclear Information System (INIS)

Clancy, B.E.

1986-01-01

This chapter begins with a neutron transport equation which includes the one dimensional plane geometry problems, the one dimensional spherical geometry problems, and numerical solutions. The section on the ANISN code and its look-alikes covers problems which can be solved; eigenvalue problems; outer iteration loop; inner iteration loop; and finite difference solution procedures. The input and output data for ANISN is also discussed. Two dimensional problems such as the DOT code are given. Finally, an overview of the Monte-Carlo methods and codes are elaborated on

Certification plan for safety and PRA codes

International Nuclear Information System (INIS)

Toffer, H.; Crowe, R.D.; Ades, M.J.

1990-05-01

A certification plan for computer codes used in Safety Analyses and Probabilistic Risk Assessment (PRA) for the operation of the Savannah River Site (SRS) reactors has been prepared. An action matrix, checklists, and a time schedule have been included in the plan. These items identify what is required to achieve certification of the codes. A list of Safety Analysis and Probabilistic Risk Assessment (SA ampersand PRA) computer codes covered by the certification plan has been assembled. A description of each of the codes was provided in Reference 4. The action matrix for the configuration control plan identifies code specific requirements that need to be met to achieve the certification plan's objectives. The checklist covers the specific procedures that are required to support the configuration control effort and supplement the software life cycle procedures based on QAP 20-1 (Reference 7). A qualification checklist for users establishes the minimum prerequisites and training for achieving levels of proficiency in using configuration controlled codes for critical parameter calculations

Parity-Check Network Coding for Multiple Access Relay Channel in Wireless Sensor Cooperative Communications

Directory of Open Access Journals (Sweden)

Du Bing

2010-01-01

Full Text Available A recently developed theory suggests that network coding is a generalization of source coding and channel coding and thus yields a significant performance improvement in terms of throughput and spatial diversity. This paper proposes a cooperative design of a parity-check network coding scheme in the context of a two-source multiple access relay channel (MARC model, a common compact model in hierarchical wireless sensor networks (WSNs. The scheme uses Low-Density Parity-Check (LDPC as the surrogate to build up a layered structure which encapsulates the multiple constituent LDPC codes in the source and relay nodes. Specifically, the relay node decodes the messages from two sources, which are used to generate extra parity-check bits by a random network coding procedure to fill up the rate gap between Source-Relay and Source-Destination transmissions. Then, we derived the key algebraic relationships among multidimensional LDPC constituent codes as one of the constraints for code profile optimization. These extra check bits are sent to the destination to realize a cooperative diversity as well as to approach MARC decode-and-forward (DF capacity.

Procedure entry in the register of yachts

Directory of Open Access Journals (Sweden)

Zorana Kostović

2011-01-01

Full Text Available The procedure of ship registration is regulated in the Maritime Code of Croatia (2004. This procedure, in comparison with the recently suspended Maritime Code of Croatia (1994, includes substantial changes, especially in the domain of yacht registration. New Maritime Code has founded special yacht-register for yachts and yachts under construction. A yacht which is registered as a Croatian yacht is entitled to the benefits conffered by the Maritime Code of Croatia (right to fly a Croatian flag, etc.. There are two modes proscribed under the provisions of Maritime Code of Croatia (2004 for yacht-registration: 1 mandatory and 2 facultative. Yachts whose owners are Croatian citizens with residence i Republic Croatia or companies which are registered in the Republic of Croatia are obligated to register under the provisions of Maritime Code of Croatia (2004. On the other hand, yacht whose owners are not Croatian citizens or whose owners are Croatian citizens but without the residence in the Republic of Croatia, can be registered in the Republic of Croatia, depending on the will of the owner. Yachts under construction can be registered in special registers for such kind of vessels if they are built in Croatian shipyards (owners can be either Croatian citizens or foreigners. Jurisdiction in this matter belongs to port authorities and all procedure is carried out in accordance with the rules of administrative procedure.

To Fight Against the Defensive Jurisprudence with the New Civil Procedure Code: Yes, We Can! Or Can We?

Directory of Open Access Journals (Sweden)

Rafael Ambrósio Gava

2016-10-01

Full Text Available In order to reduce their workloads, Brazilian Courts have been landing many precedents that lead to unwarranted restrictions to the right to appeal, thereby belittling the fundamental constitutional right to access to justice. Despite the existence of studies on this "defensive jurisprudence", there are still few who analyze it in the light of the new Civil Procedure Code (Law 13.105/2015, which is about to enter into force. This article aims to evaluate the suitability of the new CPC to remedy this adjudicative problem or at least minimize it. We demonstrated, based on literature and through a deductive argumentative reasoning, that the new procedural law contains a number of specific and general legal clauses which may be used as instruments able to curb the adjudicate "defensiveness. Nonetheless, the achievement of this goal will depend largely on how this legal clauses are to be interpreted and applied.

Coding for effective denial management.

Science.gov (United States)

Miller, Jackie; Lineberry, Joe

2004-01-01

Nearly everyone will agree that accurate and consistent coding of diagnoses and procedures is the cornerstone for operating a compliant practice. The CPT or HCPCS procedure code tells the payor what service was performed and also (in most cases) determines the amount of payment. The ICD-9-CM diagnosis code, on the other hand, tells the payor why the service was performed. If the diagnosis code does not meet the payor's criteria for medical necessity, all payment for the service will be denied. Implementation of an effective denial management program can help "stop the bleeding." Denial management is a comprehensive process that works in two ways. First, it evaluates the cause of denials and takes steps to prevent them. Second, denial management creates specific procedures for refiling or appealing claims that are initially denied. Accurate, consistent and compliant coding is key to both of these functions. The process of proactively managing claim denials also reveals a practice's administrative strengths and weaknesses, enabling radiology business managers to streamline processes, eliminate duplicated efforts and shift a larger proportion of the staff's focus from paperwork to servicing patients--all of which are sure to enhance operations and improve practice management and office morale. Accurate coding requires a program of ongoing training and education in both CPT and ICD-9-CM coding. Radiology business managers must make education a top priority for their coding staff. Front office staff, technologists and radiologists should also be familiar with the types of information needed for accurate coding. A good staff training program will also cover the proper use of Advance Beneficiary Notices (ABNs). Registration and coding staff should understand how to determine whether the patient's clinical history meets criteria for Medicare coverage, and how to administer an ABN if the exam is likely to be denied. Staff should also understand the restrictions on use of

LUCID - an optical design and raytrace code

International Nuclear Information System (INIS)

Nicholas, D.J.; Duffey, K.P.

1980-11-01

A 2D optical design and ray trace code is described. The code can operate either as a geometric optics propagation code or provide a scalar diffraction treatment. There are numerous non-standard options within the code including design and systems optimisation procedures. A number of illustrative problems relating to the design of optical components in the field of high power lasers is included. (author)

Procedures for treating common cause failures in safety and reliability studies: Analytical background and techniques

International Nuclear Information System (INIS)

Mosleh, A.; Fleming, K.N.; Parry, G.W.; Paula, H.M.; Worledge, D.H.; Rasmuson, D.M.

1989-01-01

Volume I of this report presents a framework for the inclusion of the impact of common cause failures in risk and reliability evaluations. Common cause failures are defined as that subset of dependent failures for which causes are not explicitly included in the logic model as basic events. The emphasis here is on providing procedures for a practical, systematic approach that can be used to perform and clearly document the analysis. The framework and the methods discussed for performing the different stages of the analysis integrate insights obtained from engineering assessments of the system and the historical evidence from multiple failure events into a systematic, reproducible, and defensible analysis. This document, Volume 2, contains a series of appendices that provide additional background and methodological detail on several important topics discussed in Volume I

Large-Scale Analysis of Remote Code Injection Attacks in Android Apps

OpenAIRE

Choi, Hyunwoo; Kim, Yongdae

2018-01-01

It is pretty well known that insecure code updating procedures for Android allow remote code injection attack. However, other than codes, there are many resources in Android that have to be updated, such as temporary files, images, databases, and configurations (XML and JSON). Security of update procedures for these resources is largely unknown. This paper investigates general conditions for remote code injection attacks on these resources. Using this, we design and implement a static detecti...

Error-correction coding and decoding bounds, codes, decoders, analysis and applications

CERN Document Server

Tomlinson, Martin; Ambroze, Marcel A; Ahmed, Mohammed; Jibril, Mubarak

2017-01-01

This book discusses both the theory and practical applications of self-correcting data, commonly known as error-correcting codes. The applications included demonstrate the importance of these codes in a wide range of everyday technologies, from smartphones to secure communications and transactions. Written in a readily understandable style, the book presents the authors’ twenty-five years of research organized into five parts: Part I is concerned with the theoretical performance attainable by using error correcting codes to achieve communications efficiency in digital communications systems. Part II explores the construction of error-correcting codes and explains the different families of codes and how they are designed. Techniques are described for producing the very best codes. Part III addresses the analysis of low-density parity-check (LDPC) codes, primarily to calculate their stopping sets and low-weight codeword spectrum which determines the performance of these codes. Part IV deals with decoders desi...

Code of accounts. Management overview volume: Environmental restoration

International Nuclear Information System (INIS)

Fox, M.B.; Birkholz, H.L.

1997-10-01

The purpose of this procedure is to provide the requirement for assigning cost collection codes and the structure of these codes for all costs incurred for the Environmental Restoration Contract. The coding structure will be used in the budgeting and control of project costs

The Obligation And Warranty To State Reasons Of Judicial Decisions Under The Paradigm Of The New Code Of Civil Procedure: A Right Of Democratic State Of Consolidation

Directory of Open Access Journals (Sweden)

Quezia Dornellas Fialho

2017-02-01

Full Text Available The constitutional state requires den to fundamental rights within the process. The duty, while the guarantee, the evidence of judicial decisions should, together with other procedural principles, lead to a new way of thinking about the process, not aiming at the speed at any cost, but the safe conduct of the fundamental rights of parties during the procedural motion. Thus, with respect to this duty-assurance, the new Code of Civil Procedure innovated by establishing requirements for the goals adequate reasoning of judgments.

Evaluation of Bias-Variance Trade-Off for Commonly Used Post-Summarizing Normalization Procedures in Large-Scale Gene Expression Studies

Science.gov (United States)

Qiu, Xing; Hu, Rui; Wu, Zhixin

2014-01-01

Normalization procedures are widely used in high-throughput genomic data analyses to remove various technological noise and variations. They are known to have profound impact to the subsequent gene differential expression analysis. Although there has been some research in evaluating different normalization procedures, few attempts have been made to systematically evaluate the gene detection performances of normalization procedures from the bias-variance trade-off point of view, especially with strong gene differentiation effects and large sample size. In this paper, we conduct a thorough study to evaluate the effects of normalization procedures combined with several commonly used statistical tests and MTPs under different configurations of effect size and sample size. We conduct theoretical evaluation based on a random effect model, as well as simulation and biological data analyses to verify the results. Based on our findings, we provide some practical guidance for selecting a suitable normalization procedure under different scenarios. PMID:24941114

Code portability and data management considerations in the SAS3D LMFBR accident-analysis code

International Nuclear Information System (INIS)

Dunn, F.E.

1981-01-01

The SAS3D code was produced from a predecessor in order to reduce or eliminate interrelated problems in the areas of code portability, the large size of the code, inflexibility in the use of memory and the size of cases that can be run, code maintenance, and running speed. Many conventional solutions, such as variable dimensioning, disk storage, virtual memory, and existing code-maintenance utilities were not feasible or did not help in this case. A new data management scheme was developed, coding standards and procedures were adopted, special machine-dependent routines were written, and a portable source code processing code was written. The resulting code is quite portable, quite flexible in the use of memory and the size of cases that can be run, much easier to maintain, and faster running. SAS3D is still a large, long running code that only runs well if sufficient main memory is available

Code of Practice

International Nuclear Information System (INIS)

Doyle, Colin; Hone, Christopher; Nowlan, N.V.

1984-05-01

This Code of Practice introduces accepted safety procedures associated with the use of alpha, beta, gamma and X-radiation in secondary schools (pupils aged 12 to 18) in Ireland, and summarises good practice and procedures as they apply to radiation protection. Typical dose rates at various distances from sealed sources are quoted, and simplified equations are used to demonstrate dose and shielding calculations. The regulatory aspects of radiation protection are outlined, and references to statutory documents are given

Error-Detecting Identification Codes for Algebra Students.

Science.gov (United States)

Sutherland, David C.

1990-01-01

Discusses common error-detecting identification codes using linear algebra terminology to provide an interesting application of algebra. Presents examples from the International Standard Book Number, the Universal Product Code, bank identification numbers, and the ZIP code bar code. (YP)

Translation of ARAC computer codes

International Nuclear Information System (INIS)

Takahashi, Kunio; Chino, Masamichi; Honma, Toshimitsu; Ishikawa, Hirohiko; Kai, Michiaki; Imai, Kazuhiko; Asai, Kiyoshi

1982-05-01

In 1981 we have translated the famous MATHEW, ADPIC and their auxiliary computer codes for CDC 7600 computer version to FACOM M-200's. The codes consist of a part of the Atmospheric Release Advisory Capability (ARAC) system of Lawrence Livermore National Laboratory (LLNL). The MATHEW is a code for three-dimensional wind field analysis. Using observed data, it calculates the mass-consistent wind field of grid cells by a variational method. The ADPIC is a code for three-dimensional concentration prediction of gases and particulates released to the atmosphere. It calculates concentrations in grid cells by the particle-in-cell method. They are written in LLLTRAN, i.e., LLNL Fortran language and are implemented on the CDC 7600 computers of LLNL. In this report, i) the computational methods of the MATHEW/ADPIC and their auxiliary codes, ii) comparisons of the calculated results with our JAERI particle-in-cell, and gaussian plume models, iii) translation procedures from the CDC version to FACOM M-200's, are described. Under the permission of LLNL G-Division, this report is published to keep the track of the translation procedures and to serve our JAERI researchers for comparisons and references of their works. (author)

German nuclear codes revised: comparison with approaches used in other countries

International Nuclear Information System (INIS)

Raetzke, C.; Micklinghoff, M.

2005-01-01

The article deals with the plan of the German Federal Ministry for the Environment (BMU) to revise the German set of nuclear codes, and draws a comparison with approaches pursued in other countries in formulating and implementing new requirements imposed upon existing plants. A striking feature of the BMU project is the intention to have the codes reflect the state of the art in an entirely abstract way irrespective of existing plants. This implies new requirements imposed on plant design, among other things. However, the state authorities, which establish the licensing conditions for individual plants in concrete terms, will not be able to apply these new codes for legal reasons (protection of vested rights) to the extent in which they incorporate changes in safety philosophy. Also the procedure adopted has raised considerable concern. The processing time of two years is inordinately short, and participation of the public and of industry does not go beyond the strictly formal framework of general public participation. In the light of this absence of quality assurance, it would be surprising if this new set of codes did not suffer from considerable deficits in its contents. Other countries show that the BMU is embarking on an isolated approach in every respect. Elsewhere, backfitting requirements are developed carefully and over long periods of time; they are discussed in detail with the operators; costs and benefits are weighted, and the consequences are evaluated. These elements are in common to procedures in all countries, irrespective of very different steps in detail. (orig.)

The Principle of Judicial Cooperation New Code of Civil Procedure: An Analysis Protection from the Worker Front of the Institute of Judicial Recovery

Directory of Open Access Journals (Sweden)

Patricia Fernandes Bega

2016-10-01

Full Text Available The article is subject to study the Principle of Judicial Cooperation. The problem of research focuses on the conflict between the institution of bankruptcy and labor laws. The initial hypothesis is that the principle of protection to workers and the Judicial Recovery Institute reveal clash, contradiction and non-cooperation. In this way, the work seeks to demonstrate that the procedural rule of judicial cooperation brought about by the new CPC is an instrument of dialogue between material contradictions. The objective is to analyze the new civil procedure code and the difficulty to cooperate the irreconcilable. The method used was deductive.

Applications guide to the RSIC-distributed version of the MCNP code (coupled Monte Carlo neutron-photon Code)

International Nuclear Information System (INIS)

Cramer, S.N.

1985-09-01

An overview of the RSIC-distributed version of the MCNP code (a soupled Monte Carlo neutron-photon code) is presented. All general features of the code, from machine hardware requirements to theoretical details, are discussed. The current nuclide cross-section and other libraries available in the standard code package are specified, and a realistic example of the flexible geometry input is given. Standard and nonstandard source, estimator, and variance-reduction procedures are outlined. Examples of correct usage and possible misuse of certain code features are presented graphically and in standard output listings. Finally, itemized summaries of sample problems, various MCNP code documentation, and future work are given

How Common Is PTSD?

Science.gov (United States)

... Center for PTSD » Public » How Common Is PTSD? PTSD: National Center for PTSD Menu Menu PTSD PTSD Home For the Public ... here Enter ZIP code here How Common Is PTSD? Public This section is for Veterans, General Public, ...

Ethical and educational considerations in coding hand surgeries.

Science.gov (United States)

Lifchez, Scott D; Leinberry, Charles F; Rivlin, Michael; Blazar, Philip E

2014-07-01

To assess treatment coding knowledge and practices among residents, fellows, and attending hand surgeons. Through the use of 6 hypothetical cases, we developed a coding survey to assess coding knowledge and practices. We e-mailed this survey to residents, fellows, and attending hand surgeons. In additionally, we asked 2 professional coders to code these cases. A total of 71 participants completed the survey out of 134 people to whom the survey was sent (response rate = 53%). We observed marked disparity in codes chosen among surgeons and among professional coders. Results of this study indicate that coding knowledge, not just its ethical application, had a major role in coding procedures accurately. Surgical coding is an essential part of a hand surgeon's practice and is not well learned during residency or fellowship. Whereas ethical issues such as deliberate unbundling and upcoding may have a role in inaccurate coding, lack of knowledge among surgeons and coders has a major role as well. Coding has a critical role in every hand surgery practice. Inconstancies among those polled in this study reveal that an increase in education on coding during training and improvement in the clarity and consistency of the Current Procedural Terminology coding rules themselves are needed. Copyright © 2014 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

NSURE code

International Nuclear Information System (INIS)

Rattan, D.S.

1993-11-01

NSURE stands for Near-Surface Repository code. NSURE is a performance assessment code. developed for the safety assessment of near-surface disposal facilities for low-level radioactive waste (LLRW). Part one of this report documents the NSURE model, governing equations and formulation of the mathematical models, and their implementation under the SYVAC3 executive. The NSURE model simulates the release of nuclides from an engineered vault, their subsequent transport via the groundwater and surface water pathways tot he biosphere, and predicts the resulting dose rate to a critical individual. Part two of this report consists of a User's manual, describing simulation procedures, input data preparation, output and example test cases

Code conforming determination of cumulative usage factors for general elastic-plastic finite element analyses

International Nuclear Information System (INIS)

Rudolph, Juergen; Goetz, Andreas; Hilpert, Roland

2012-01-01

The procedures of fatigue analyses of several relevant nuclear and conventional design codes (ASME, KTA, EN, AD) for power plant components differentiate between an elastic, simplified elastic-plastic and elastic-plastic fatigue check. As a rule, operational load levels will exclude the purely elastic fatigue check. The application of the code procedure of the simplified elastic-plastic fatigue check is common practice. Nevertheless, resulting cumulative usage factors may be overly conservative mainly due to high code based plastification penalty factors Ke. As a consequence, the more complex and still code conforming general elastic-plastic fatigue analysis methodology based on non-linear finite element analysis (FEA) is applied for fatigue design as an alternative. The requirements of the FEA and the material law to be applied have to be clarified in a first step. Current design codes only give rough guidelines on these relevant items. While the procedure for the simplified elastic-plastic fatigue analysis and the associated code passages are based on stress related cycle counting and the determination of pseudo elastic equivalent stress ranges, an adaptation to elastic-plastic strains and strain ranges is required for the elastic-plastic fatigue check. The associated requirements are explained in detail in the paper. If the established and implemented evaluation mechanism (cycle counting according to the peak and valley respectively the rainflow method, calculation of stress ranges from arbitrary load-time histories and determination of cumulative usage factors based on all load events) is to be retained, a conversion of elastic-plastic strains and strain ranges into pseudo elastic stress ranges is required. The algorithm to be applied is described in the paper. It has to be implemented in the sense of an extended post processing operation of FEA e.g. by APDL scripts in ANSYS registered . Variations of principal stress (strain) directions during the loading

Accuracy of Administrative Codes for Distinguishing Positive Pressure Ventilation from High-Flow Nasal Cannula.

Science.gov (United States)

Good, Ryan J; Leroue, Matthew K; Czaja, Angela S

2018-06-07

Noninvasive positive pressure ventilation (NIPPV) is increasingly used in critically ill pediatric patients, despite limited data on safety and efficacy. Administrative data may be a good resource for observational studies. Therefore, we sought to assess the performance of the International Classification of Diseases, Ninth Revision procedure code for NIPPV. Patients admitted to the PICU requiring NIPPV or heated high-flow nasal cannula (HHFNC) over the 11-month study period were identified from the Virtual PICU System database. The gold standard was manual review of the electronic health record to verify the use of NIPPV or HHFNC among the cohort. The presence or absence of a NIPPV procedure code was determined by using administrative data. Test characteristics with 95% confidence intervals (CIs) were generated, comparing administrative data with the gold standard. Among the cohort ( n = 562), the majority were younger than 5 years, and the most common primary diagnosis was bronchiolitis. Most (82%) required NIPPV, whereas 18% required only HHFNC. The NIPPV code had a sensitivity of 91.1% (95% CI: 88.2%-93.6%) and a specificity of 57.6% (95% CI: 47.2%-67.5%), with a positive likelihood ratio of 2.15 (95% CI: 1.70-2.71) and negative likelihood ratio of 0.15 (95% CI: 0.11-0.22). Among our critically ill pediatric cohort, NIPPV procedure codes had high sensitivity but only moderate specificity. On the basis of our study results, there is a risk of misclassification, specifically failure to identify children who require NIPPV, when using administrative data to study the use of NIPPV in this population. Copyright © 2018 by the American Academy of Pediatrics.

Quality improvement of International Classification of Diseases, 9th revision, diagnosis coding in radiation oncology: single-institution prospective study at University of California, San Francisco.

Science.gov (United States)

Chen, Chien P; Braunstein, Steve; Mourad, Michelle; Hsu, I-Chow J; Haas-Kogan, Daphne; Roach, Mack; Fogh, Shannon E

2015-01-01

Accurate International Classification of Diseases (ICD) diagnosis coding is critical for patient care, billing purposes, and research endeavors. In this single-institution study, we evaluated our baseline ICD-9 (9th revision) diagnosis coding accuracy, identified the most common errors contributing to inaccurate coding, and implemented a multimodality strategy to improve radiation oncology coding. We prospectively studied ICD-9 coding accuracy in our radiation therapy--specific electronic medical record system. Baseline ICD-9 coding accuracy was obtained from chart review targeting ICD-9 coding accuracy of all patients treated at our institution between March and June of 2010. To improve performance an educational session highlighted common coding errors, and a user-friendly software tool, RadOnc ICD Search, version 1.0, for coding radiation oncology specific diagnoses was implemented. We then prospectively analyzed ICD-9 coding accuracy for all patients treated from July 2010 to June 2011, with the goal of maintaining 80% or higher coding accuracy. Data on coding accuracy were analyzed and fed back monthly to individual providers. Baseline coding accuracy for physicians was 463 of 661 (70%) cases. Only 46% of physicians had coding accuracy above 80%. The most common errors involved metastatic cases, whereby primary or secondary site ICD-9 codes were either incorrect or missing, and special procedures such as stereotactic radiosurgery cases. After implementing our project, overall coding accuracy rose to 92% (range, 86%-96%). The median accuracy for all physicians was 93% (range, 77%-100%) with only 1 attending having accuracy below 80%. Incorrect primary and secondary ICD-9 codes in metastatic cases showed the most significant improvement (10% vs 2% after intervention). Identifying common coding errors and implementing both education and systems changes led to significantly improved coding accuracy. This quality assurance project highlights the potential problem

Failure to Follow Written Procedures

Science.gov (United States)

2017-12-01

Most tasks in aviation have a mandated written procedure to be followed specifically under the Code of Federal Regulations (CFR) Part 14, Section 43.13(a). However, the incidence of Failure to Follow Procedure (FFP) events continues to be a major iss...

JJ1017 committee report: image examination order codes--standardized codes for imaging modality, region, and direction with local expansion: an extension of DICOM.

Science.gov (United States)

Kimura, Michio; Kuranishi, Makoto; Sukenobu, Yoshiharu; Watanabe, Hiroki; Tani, Shigeki; Sakusabe, Takaya; Nakajima, Takashi; Morimura, Shinya; Kabata, Shun

2002-06-01

The digital imaging and communications in medicine (DICOM) standard includes parts regarding nonimage data information, such as image study ordering data and performed procedure data, and is used for sharing information between HIS/RIS and modality systems, which is essential for IHE. To bring such parts of the DICOM standard into force in Japan, a joint committee of JIRA and JAHIS established the JJ1017 management guideline, specifying, for example, which items are legally required in Japan, while remaining optional in the DICOM standard. In Japan, the contents of orders from referring physicians for radiographic examinations include details of the examination. Such details are not used typically by referring physicians requesting radiographic examinations in the United States, because radiologists in the United States often determine the examination protocol. The DICOM standard has code tables for examination type, region, and direction for image examination orders. However, this investigation found that it does not include items that are detailed sufficiently for use in Japan, because of the above-mentioned reason. To overcome these drawbacks, we have generated the JJ1017 code for these 3 codes for use based on the JJ1017 guidelines. This report introduces the JJ1017 code. These codes (the study type codes in particular) must be expandable to keep up with technical advances in equipment. Expansion has 2 directions: width for covering more categories and depth for specifying the information in more detail (finer categories). The JJ1017 code takes these requirements into consideration and clearly distinguishes between the stem part as the common term and the expansion. The stem part of the JJ1017 code partially utilizes the DICOM codes to remain in line with the DICOM standard. This work is an example of how local requirements can be met by using the DICOM standard and extending it.

Polynomial theory of error correcting codes

CERN Document Server

Cancellieri, Giovanni

2015-01-01

The book offers an original view on channel coding, based on a unitary approach to block and convolutional codes for error correction. It presents both new concepts and new families of codes. For example, lengthened and modified lengthened cyclic codes are introduced as a bridge towards time-invariant convolutional codes and their extension to time-varying versions. The novel families of codes include turbo codes and low-density parity check (LDPC) codes, the features of which are justified from the structural properties of the component codes. Design procedures for regular LDPC codes are proposed, supported by the presented theory. Quasi-cyclic LDPC codes, in block or convolutional form, represent one of the most original contributions of the book. The use of more than 100 examples allows the reader gradually to gain an understanding of the theory, and the provision of a list of more than 150 definitions, indexed at the end of the book, permits rapid location of sought information.

Development of the present reference fracture toughness curves in the ASME nuclear code

International Nuclear Information System (INIS)

Yukawa, S.; Merkle, J.G.

1984-01-01

Since the early 1970's, the Sections of the ASME Boiler and Pressure Vessel Code concerned with nuclear power plant components have included fracture mechanics procedures to analyze the effects of postulated or detected flaws. These procedures are contained in Appendix G of Section III and in Appendix A of Section XI of the Code. Specifically, Appendix G procedures are concerned with designing for protection against nonductile failures while Appendix A procedures are for evaluating the disposition of flaws detected during in-service inspection. An important element of the procedures is the inclusion of recommended material fracture toughness values. This paper describes the origin and development of these recommended fracture toughness values. Since these values appear in the Code in a graphical format, the values are often referred to as reference toughness curves. In the context of Code terminology, reference toughness means the allowable values of fracture toughness for the materials of concern that can be used in conjunction with the analytical procedures of Appendices G and A. The paper discusses the basis and rationale underlying the original formulation of these reference toughness curves and the modifications incorporated into them in the course of their adoption into the Code

Quality assurance aspects of the environmental code NECTAR

International Nuclear Information System (INIS)

Macdonald, H.F.; Nair, S.; Mascall, R.A.

1986-02-01

This report describes the quality assurance (QA) procedures which have been adopted in respect of the Environment code NECTAR (Nuclear Environmental Consequences, Transport of Activity and Risks). These procedures involve the verification, validation and evaluation of the individual NECTAR modules, namely RICE, SIRKIT, ATMOS, POPDOS and FOODWEB. The verification and validation of each module are considered in turn, while the final part of the report provides an overall evaluation of the code. The QA procedures are designed to provide reassurance that the NECTAR code is free from systematic errors and will perform calculations within the range of uncertainty and limitations claimed in its documentation. Following consideration of a draft version of this report by the Off-site Dose Methodology Working Group, the ATMOS, POPDOS and FOODWEB modules of NECTAR have been endorsed for use by the Board in reactor design and safety studies. (author)

Comparison of 2015 Medicare relative value units for gender-specific procedures: Gynecologic and gynecologic-oncologic versus urologic CPT coding. Has time healed gender-worth?

Science.gov (United States)

Benoit, M F; Ma, J F; Upperman, B A

2017-02-01

In 1992, Congress implemented a relative value unit (RVU) payment system to set reimbursement for all procedures covered by Medicare. In 1997, data supported that a significant gender bias existed in reimbursement for gynecologic compared to urologic procedures. The present study was performed to compare work and total RVU's for gender specific procedures effective January 2015 and to evaluate if time has healed the gender-based RVU worth. Using the 2015 CPT codes, we compared work and total RVU's for 50 pairs of gender specific procedures. We also evaluated 2015 procedure related provider compensation. The groups were matched so that the procedures were anatomically similar. We also compared 2015 to 1997 RVU and fee schedules. Evaluation of work RVU's for the paired procedures revealed that in 36 cases (72%), male vs female procedures had a higher wRVU and tRVU. For total fee/reimbursement, 42 (84%) male based procedures were compensated at a higher rate than the paired female procedures. On average, male specific surgeries were reimbursed at an amount that was 27.67% higher for male procedures than for female-specific surgeries. Female procedure based work RVU's have increased minimally from 1997 to 2015. Time and effort have trended towards resolution of some gender-related procedure worth discrepancies but there are still significant RVU and compensation differences that should be further reviewed and modified as surgical time and effort highly correlate. Copyright © 2016. Published by Elsevier Inc.

Calibration Methods for Reliability-Based Design Codes

DEFF Research Database (Denmark)

Gayton, N.; Mohamed, A.; Sørensen, John Dalsgaard

2004-01-01

The calibration methods are applied to define the optimal code format according to some target safety levels. The calibration procedure can be seen as a specific optimization process where the control variables are the partial factors of the code. Different methods are available in the literature...

FERD and FERDOR type unfolding codes

International Nuclear Information System (INIS)

Burrus, W.R.

1976-01-01

FERD and FERDO are unfolding codes which were developed at the Neutron Physics Division of Oak Ridge National Laboratory in 1965 and 1966. FERDO variants such as FERDOR and FORIST have been widely used, and many useful supplementary procedures have been developed for neutron and gamma-ray spectroscopy and other diverse applications. Algorithms for the codes are discussed

The computer code SEURBNUK-2

International Nuclear Information System (INIS)

Yerkess, A.

1984-01-01

SEURBNUK-2 has been designed to model the hydrodynamic development in time of a hypothetical core disrupture accident in a fast breeder reactor. SEURBNUK-2 is a two-dimensional, axisymmetric, eulerian, finite difference containment code. The numerical procedure adopted in SEURBNUK to solve the hydrodynamic equations is based on the semi-implicit ICE method. SEURBNUK has a full thin shell treatment for tanks of arbitrary shape and includes the effects of the compressibility of the fluid. Fluid flow through porous media and porous structures can also be accommodated. An important feature of SEURBNUK is that the thin shell equations are solved quite separately from those of the fluid, and the time step for the fluid flow calculation can be an integer multiple of that for calculating the shell motion. The interaction of the shell with the fluid is then considered as a modification to the coefficients in the implicit pressure equations, the modifications naturally depending on the behaviour of the thin shell section within the fluid cell. The code is limited to dealing with a single fluid, the coolant, whereas the bubble and the cover gas are treated as cavities of uniform pressure calculated via appropriate pressure-volume-energy relationships. This manual describes the input data specifications needed for the execution of SEURBNUK-2 calculations and nine sample problems of varying degrees of complexity highlight the code capabilities. After explaining the output facilities information is included to aid those unfamiliar with SEURBNUK-2 to avoid the common pit-falls experienced by novices

Computer-assisted Particle-in-Cell code development

International Nuclear Information System (INIS)

Kawata, S.; Boonmee, C.; Teramoto, T.; Drska, L.; Limpouch, J.; Liska, R.; Sinor, M.

1997-12-01

This report presents a new approach for an electromagnetic Particle-in-Cell (PIC) code development by a computer: in general PIC codes have a common structure, and consist of a particle pusher, a field solver, charge and current density collections, and a field interpolation. Because of the common feature, the main part of the PIC code can be mechanically developed on a computer. In this report we use the packages FIDE and GENTRAN of the REDUCE computer algebra system for discretizations of field equations and a particle equation, and for an automatic generation of Fortran codes. The approach proposed is successfully applied to the development of 1.5-dimensional PIC code. By using the generated PIC code the Weibel instability in a plasma is simulated. The obtained growth rate agrees well with the theoretical value. (author)

Benchmark calculation for GT-MHR using HELIOS/MASTER code package and MCNP

International Nuclear Information System (INIS)

Lee, Kyung Hoon; Kim, Kang Seog; Noh, Jae Man; Song, Jae Seung; Zee, Sung Quun

2005-01-01

The latest research associated with the very high temperature gas-cooled reactor (VHTR) is focused on the verification of a system performance and safety under operating conditions for the VHTRs. As a part of those, an international gas-cooled reactor program initiated by IAEA is going on. The key objectives of this program are the validation of analytical computer codes and the evaluation of benchmark models for the projected and actual VHTRs. New reactor physics analysis procedure for the prismatic VHTR is under development by adopting the conventional two-step procedure. In this procedure, a few group constants are generated through the transport lattice calculations using the HELIOS code, and the core physics analysis is performed by the 3-dimensional nodal diffusion code MASTER. We evaluated the performance of the HELIOS/MASTER code package through the benchmark calculations related to the GT-MHR (Gas Turbine-Modular Helium Reactor) to dispose weapon plutonium. In parallel, MCNP is employed as a reference code to verify the results of the HELIOS/MASTER procedure

Developing Optimal Procedure of Emergency Outside Cooling Water Injection for APR1400 Extended SBO Scenario Using MARS Code

Energy Technology Data Exchange (ETDEWEB)

Hwang, Jong Rok; Oh, Seung Jong [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2013-10-15

In this study, we examined optimum operator actions to mitigate extended SBO using MARS code. Particularly, this paper focuses on analyzing outside core cooling water injection scenario, and aimed to develop optimal extended SBO procedure. Supplying outside emergency cooling water is the key feature of flexible strategy in extended SBO situation. An optimum strategy to maintain core cooling is developed for typical extended SBO. MARS APR1400 best estimate model was used to find optimal procedure. Also RCP seal leakage effect was considered importantly. Recent Fukushima accident shows the importance of mitigation capability against extended SBO scenarios. In Korea, all nuclear power plants incorporated various measures against Fukushima-like events. For APR1400 NPP, outside connectors are installed to inject cooling water using fire trucks or portable pumps. Using these connectors, outside cooling water can be provided to reactor, steam generators (SG), containment spray system, and spent fuel pool. In U. S., similar approach is chosen to provide a diverse and flexible means to prevent fuel damage (core and SFP) in external event conditions resulting in extended loss of AC power and loss of ultimate heat sink. Hence, hardware necessary to cope with extended SBO is already available for APR1400. However, considering the complex and stressful condition encountered by operators during extended SBO, it is important to develop guidelines/procedures to best cope with the event.

Trends in Medicare Reimbursement for Orthopedic Procedures: 2000 to 2016.

Science.gov (United States)

Eltorai, Adam E M; Durand, Wesley M; Haglin, Jack M; Rubin, Lee E; Weiss, Arnold-Peter C; Daniels, Alan H

2018-03-01

Understanding trends in reimbursement is critical to the financial sustainability of orthopedic practices. Little research has examined physician fee trends over time for orthopedic procedures. This study evaluated trends in Medicare reimbursements for orthopedic surgical procedures. The Medicare Physician Fee Schedule was examined for Current Procedural Terminology code values for the most common orthopedic and nonorthopedic procedures between 2000 and 2016. Prices were adjusted for inflation to 2016-dollar values. To assess mean growth rate for each procedure and subspecialty, compound annual growth rates were calculated. Year-to-year dollar amount changes were calculated for each procedure and subspecialty. Reimbursement trends for individual procedures and across subspecialties were compared. Between 2000 and 2016, annual reimbursements decreased for all orthopedic procedures examined except removal of orthopedic implant. The orthopedic procedures with the greatest mean annual decreases in reimbursement were shoulder arthroscopy/decompression, total knee replacement, and total hip replacement. The orthopedic procedures with the least annual reimbursement decreases were carpal tunnel release and repair of ankle fracture. Rate of Medicare procedure reimbursement change varied between subspecialties. Trauma had the smallest decrease in annual change compared with spine, sports, and hand. Annual reimbursement decreased at a significantly greater rate for adult reconstruction procedures than for any of the other subspecialties. These findings indicate that reimbursement for procedures has steadily decreased, with the most rapid decrease seen in adult reconstruction. [Orthopedics. 2018; 41(2):95-102.]. Copyright 2018, SLACK Incorporated.

Arbitration Institute of Modernization in Contemporary Scene From the Perspective of New Brazilian Civil Procedure Code

Directory of Open Access Journals (Sweden)

Feliciano Alcides Dias

2015-12-01

Full Text Available The complexity of contemporary society has led to the existence of conflicts in excessive degree of legalization, resulting from a demandista culture coupled with the inefficiency and delays in the provision of state judicial services. This traditional model of conflict resolution is the result of a mistaken reading of the constitutional guarantee of access to justice that took, long, a monopolistic feature, turning the Brazilian Judiciary in a multiport system to receive any kind of demand. However, not every conflict of interest claims the provocation of state jurisdiction, worth observing the democratic dimension of access to justice established by the new Civil Procedure Code, referring to arbitration as an appropriate means of conflict resolution in private. In this context, the new legislation reforming and updates the Law of Arbitration, the expectation is modernizing its institute of court, without state intervention.

TMACS Test Procedure TP009: Acromag Driver

International Nuclear Information System (INIS)

Washburn, S.J.

1994-01-01

The TMACS Software Project Test Procedures translate the project's acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure tests the TMACS Acromag Software Driver (Bridge Code)

QCI Common

Energy Technology Data Exchange (ETDEWEB)

2016-11-18

There are many common software patterns and utilities for the ORNL Quantum Computing Institute that can and should be shared across projects. Otherwise we find duplication of code which adds unwanted complexity. This is a software product seeks to alleviate this by providing common utilities such as object factories, graph data structures, parameter input mechanisms, etc., for other software products within the ORNL Quantum Computing Institute. This work enables pure basic research, has no export controlled utilities, and has no real commercial value.

Remote-Handled Transuranic Content Codes

International Nuclear Information System (INIS)

2001-01-01

The Remote-Handled Transuranic (RH-TRU) Content Codes (RH-TRUCON) document represents the development of a uniform content code system for RH-TRU waste to be transported in the 72-Bcask. It will be used to convert existing waste form numbers, content codes, and site-specific identification codes into a system that is uniform across the U.S. Department of Energy (DOE) sites.The existing waste codes at the sites can be grouped under uniform content codes without any lossof waste characterization information. The RH-TRUCON document provides an all-encompassing description for each content code and compiles this information for all DOE sites. Compliance with waste generation, processing, and certification procedures at the sites (outlined in this document foreach content code) ensures that prohibited waste forms are not present in the waste. The content code gives an overall description of the RH-TRU waste material in terms of processes and packaging, as well as the generation location. This helps to provide cradle-to-grave traceability of the waste material so that the various actions required to assess its qualification as payload for the 72-B cask can be performed. The content codes also impose restrictions and requirements on the manner in which a payload can be assembled. The RH-TRU Waste Authorized Methods for Payload Control (RH-TRAMPAC), Appendix 1.3.7 of the 72-B Cask Safety Analysis Report (SAR), describes the current governing procedures applicable for the qualification of waste as payload for the 72-B cask. The logic for this classification is presented in the 72-B Cask SAR. Together, these documents (RH-TRUCON, RH-TRAMPAC, and relevant sections of the 72-B Cask SAR) present the foundation and justification for classifying RH-TRU waste into content codes. Only content codes described in thisdocument can be considered for transport in the 72-B cask. Revisions to this document will be madeas additional waste qualifies for transport. Each content code uniquely

Trends in Utilization of Vocal Fold Injection Procedures.

Science.gov (United States)

Rosow, David E

2015-11-01

Office-based vocal fold injections have become increasingly popular over the past 15 years. Examination of trends in procedure coding for vocal fold injections in the United States from 2000 to 2012 was undertaken to see if they reflect this shift. The US Part B Medicare claims database was queried from 2000 through 2012 for multiple Current Procedural Terminology codes. Over the period studied, the number of nonoperative laryngoscopic injections (31513, 31570) and operative medialization laryngoplasties (31588) remained constant. Operative vocal fold injection (31571) demonstrated marked linear growth over the 12-year study period, from 744 procedures in 2000 to 4788 in 2012-an increase >640%. The dramatic increased incidence in the use of code 31571 reflects an increasing share of vocal fold injections being performed in the operating room and not in an office setting, running counter to the prevailing trend toward awake, office-based injection procedures. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2015.

ICARE/CATHARE and ASTEC code development trends

International Nuclear Information System (INIS)

Chatelard, P.; Dorsselaere, J.-P. van

2000-01-01

Regarding the computer code development for simulation of LWR severe accidents, IPSN developed a two-tier approach based on detailed codes such as ICARE/CATHARE and simplified models to be assembled in the ASTEC integral code. The ICARE/CATHARE code results from the coupling between the ICARE2 code modelling the core degradation phenomena and the thermalhydraulics code CATHARE2. It allows to calculate PWR and VVER severe accident sequences in the whole RCS. The modelling of the early degradation phase can be considered as rather complete in the ICARE/CATHARE V1 mod1 version (to be released by mid-2000) whereas some models are still missing for the late phase. The main future developments (ICARE/CATHARE V2) will concern the multi-dimensional thermalhydraulics, the quenching of partially damaged cores (mechanical and chemical effects), the debris bed two-phase thermalhydraulics (including reflooding) and the corium behaviour in the lower head. The main other physical improvements should concern the behaviour of boron carbide control rods, the processes governing the core loss of geometry (transition phase) and the oxidation of relocated melts. The ASTEC (Accident Source Term Evaluation Code) integral code, commonly developed by IPSN and GRS, aims to predict an entire LWR (PWR, VVER and BWR) severe accident sequence from the initiating event through to FP release out of the containment, for source term, PSA level 2, or accident management studies. The version ASTEC VO.3 to be released by mid-2000 can be considered now as robust and fast-running enough (between 2 and 12 hours for a one day accident) and allows to perform, with a containment multi-compartment configuration, any scenario accident study accounting for the main safety systems and operator procedures (spray, recombiner, etc.). The next version ASTEC V1, to be released beginning of 2002, will include the frontend simulation and improve modelling of in-vessel core degradation. A large validation activity will

Detecting non-coding selective pressure in coding regions

Directory of Open Access Journals (Sweden)

Blanchette Mathieu

2007-02-01

Full Text Available Abstract Background Comparative genomics approaches, where orthologous DNA regions are compared and inter-species conserved regions are identified, have proven extremely powerful for identifying non-coding regulatory regions located in intergenic or intronic regions. However, non-coding functional elements can also be located within coding region, as is common for exonic splicing enhancers, some transcription factor binding sites, and RNA secondary structure elements affecting mRNA stability, localization, or translation. Since these functional elements are located in regions that are themselves highly conserved because they are coding for a protein, they generally escaped detection by comparative genomics approaches. Results We introduce a comparative genomics approach for detecting non-coding functional elements located within coding regions. Codon evolution is modeled as a mixture of codon substitution models, where each component of the mixture describes the evolution of codons under a specific type of coding selective pressure. We show how to compute the posterior distribution of the entropy and parsimony scores under this null model of codon evolution. The method is applied to a set of growth hormone 1 orthologous mRNA sequences and a known exonic splicing elements is detected. The analysis of a set of CORTBP2 orthologous genes reveals a region of several hundred base pairs under strong non-coding selective pressure whose function remains unknown. Conclusion Non-coding functional elements, in particular those involved in post-transcriptional regulation, are likely to be much more prevalent than is currently known. With the numerous genome sequencing projects underway, comparative genomics approaches like that proposed here are likely to become increasingly powerful at detecting such elements.

Objective Truth Institution in Criminal Procedure

Directory of Open Access Journals (Sweden)

Voltornist O. A.

2012-11-01

Full Text Available The article deals with the category of objective truth in criminal procedure, its importance for correct determination of criminal court procedure aims. The author analyzes also the bill draft offered by the RF Committee of Inquiry “On amending in the RF Criminal Procedure Code due to the implementation ofobjective truth institution in criminal procedure”

System Based Code: Principal Concept

International Nuclear Information System (INIS)

Yasuhide Asada; Masanori Tashimo; Masahiro Ueta

2002-01-01

This paper introduces a concept of the 'System Based Code' which has initially been proposed by the authors intending to give nuclear industry a leap of progress in the system reliability, performance improvement, and cost reduction. The concept of the System Based Code intends to give a theoretical procedure to optimize the reliability of the system by administrating every related engineering requirement throughout the life of the system from design to decommissioning. (authors)

CRUCIB: an axisymmetric convection code

International Nuclear Information System (INIS)

Bertram, L.A.

1975-03-01

The CRUCIB code was written in support of an experimental program aimed at measurement of thermal diffusivities of refractory liquids. Precise values of diffusivity are necessary to realistic analysis of reactor safety problems, nuclear waste disposal procedures, and fundamental metal forming processes. The code calculates the axisymmetric transient convective motions produced in a right circular cylindrical crucible, which is surface heated by an annular heat pulse. Emphasis of this report is placed on the input-output options of the CRUCIB code, which are tailored to assess the importance of the convective heat transfer in determining the surface temperature distribution. Use is limited to Prandtl numbers less than unity; larger values can be accommodated by replacement of a single block of the code, if desired. (U.S.)

Practical moral codes in the transgenic organism debate.

Science.gov (United States)

Cooley, D R; Goreham, Gary; Youngs, George A

2004-01-01

In one study funded by the United States Department of Agriculture, people from North Dakota were interviewed to discover which moral principles they use in evaluating the morality of transgenic organisms and their introduction into markets. It was found that although the moral codes the human subjects employed were very similar, their views on transgenics were vastly different. In this paper, the codes that were used by the respondents are developed, compared to that of the academically composed Belmont Report, and then modified to create the more practical Common Moral Code. At the end, it is shown that the Common Moral Code has inherent inconsistency flaws that might be resolvable, but would require extensive work on the definition of terms and principles. However, the effort is worthwhile, especially if it results in a common moral code that all those involved in the debate are willing to use in negotiating a resolution to their differences.

Comparison of elevated temperature design codes of ASME Subsection NH and RCC-MRx

Energy Technology Data Exchange (ETDEWEB)

Lee, Hyeong-Yeon, E-mail: hylee@kaeri.re.kr

2016-11-15

Highlights: • Comparison of elevated temperature design (ETD) codes was made. • Material properties and evaluation procedures were compared. • Two heat-resistant materials of Grade 91 steel and austenitic stainless steel 316 are the target materials in the present study. • Application of the ETD codes to Generation IV reactor components and a comparison of the conservatism was conducted. - Abstract: The elevated temperature design (ETD) codes are used for the design evaluation of Generation IV (Gen IV) reactor systems such as sodium-cooled fast reactor (SFR), lead-cooled fast reactor (LFR), and very high temperature reactor (VHTR). In the present study, ETD code comparisons were made in terms of the material properties and design evaluation procedures for the recent versions of the two major ETD codes, ASME Section III Subsection NH and RCC-MRx. Conservatism in the design evaluation procedures was quantified and compared based on the evaluation results for SFR components as per the two ETD codes. The target materials are austenitic stainless steel 316 and Mod.9Cr-1Mo steel, which are the major two materials in a Gen IV SFR. The differences in the design evaluation procedures as well as the material properties in the two ETD codes are highlighted.

Addressing challenges in bar-code scanning of large-volume infusion bags.

Science.gov (United States)

Raman, Kirthana; Heelon, Mark; Kerr, Gary; Higgins, Thomas L

2011-08-01

A hospital pharmacy's efforts to identify and address challenges with bedside scanning of bar codes on large-volume parenteral (LVP) infusion bags are described. Bar-code-assisted medication administration (BCMA) has been shown to reduce medication errors and improve patient safety. After the pilot implementation of a BCMA system and point-of-care scanning procedures at a medical center's intensive care unit, it was noted that nurses' attempted bedside scans of certain LVP bags for product identification purposes often were not successful. An investigation and root-cause analysis, including observation of nurses' scanning technique by a multidisciplinary team, determined that the scanning failures stemmed from the placement of two bar-code imprints-one with the product identification code and another, larger imprint with the expiration date and lot number-adjacently on the LVP bags. The nursing staff was educated on a modified scanning technique, which resulted in significantly improved success rates in the scanning of the most commonly used LVP bags. Representatives of the LVP bag manufacturer met with hospital staff to discuss the problem and corrective measures. As part of a subsequent infusion bag redesign, the manufacturer discontinued the use of the bar-code imprint implicated in the scanning failures. Failures in scanning LVP bags were traced to problematic placement of bar-code imprints on the bags. Interdisciplinary collaboration, consultation with the bag manufacturer, and education of the nursing and pharmacy staff resulted in a reduction in scanning failures and the manufacturer's removal of one of the bar codes from its LVP bags.

Defining a methodology for benchmarking spectrum unfolding codes

International Nuclear Information System (INIS)

Meyer, W.; Kirmser, P.G.; Miller, W.H.; Hu, K.K.

1976-01-01

It has long been recognized that different neutron spectrum unfolding codes will produce significantly different results when unfolding the same measured data. In reviewing the results of such analyses it has been difficult to determine which result if any is the best representation of what was measured by the spectrometer detector. A proposal to develop a benchmarking procedure for spectrum unfolding codes is presented. The objective of the procedure will be to begin to develop a methodology and a set of data with a well established and documented result that could be used to benchmark and standardize the various unfolding methods and codes. It is further recognized that development of such a benchmark must involve a consensus of the technical community interested in neutron spectrum unfolding

From text to codings: intercoder reliability assessment in qualitative content analysis.

Science.gov (United States)

Burla, Laila; Knierim, Birte; Barth, Jurgen; Liewald, Katharina; Duetz, Margreet; Abel, Thomas

2008-01-01

High intercoder reliability (ICR) is required in qualitative content analysis for assuring quality when more than one coder is involved in data analysis. The literature is short of standardized procedures for ICR procedures in qualitative content analysis. To illustrate how ICR assessment can be used to improve codings in qualitative content analysis. Key steps of the procedure are presented, drawing on data from a qualitative study on patients' perspectives on low back pain. First, a coding scheme was developed using a comprehensive inductive and deductive approach. Second, 10 transcripts were coded independently by two researchers, and ICR was calculated. A resulting kappa value of .67 can be regarded as satisfactory to solid. Moreover, varying agreement rates helped to identify problems in the coding scheme. Low agreement rates, for instance, indicated that respective codes were defined too broadly and would need clarification. In a third step, the results of the analysis were used to improve the coding scheme, leading to consistent and high-quality results. The quantitative approach of ICR assessment is a viable instrument for quality assurance in qualitative content analysis. Kappa values and close inspection of agreement rates help to estimate and increase quality of codings. This approach facilitates good practice in coding and enhances credibility of analysis, especially when large samples are interviewed, different coders are involved, and quantitative results are presented.

The Assignment of Judging in the New Code of Civil Procedure: The Interactions Between the Legal Formalism and Democratic Formalism

Directory of Open Access Journals (Sweden)

Alan Da Silva Esteves Da Silva Esteves

2016-10-01

Full Text Available The assignment of judging in the new Code of Civil Procedure starts with the interactions between classical formalism and democratic formalism. The theories of constitutional hermeneutics, of civil adjectival law and of traditional Positivism are used in order to reaffirm the requirement of motivating the judgment in the higher degree of quality. It is necessary to understand the changes of the standards on the legal interpretation and the act of judging. The concept of jurisdiction in the Constitutional State connects to the constitutional principles of justice and fundamental rights, and approach the formal aspects of materials.

LSENS: A General Chemical Kinetics and Sensitivity Analysis Code for homogeneous gas-phase reactions. Part 1: Theory and numerical solution procedures

Science.gov (United States)

Radhakrishnan, Krishnan

1994-01-01

LSENS, the Lewis General Chemical Kinetics and Sensitivity Analysis Code, has been developed for solving complex, homogeneous, gas-phase chemical kinetics problems and contains sensitivity analysis for a variety of problems, including nonisothermal situations. This report is part 1 of a series of three reference publications that describe LENS, provide a detailed guide to its usage, and present many example problems. Part 1 derives the governing equations and describes the numerical solution procedures for the types of problems that can be solved. The accuracy and efficiency of LSENS are examined by means of various test problems, and comparisons with other methods and codes are presented. LSENS is a flexible, convenient, accurate, and efficient solver for chemical reaction problems such as static system; steady, one-dimensional, inviscid flow; reaction behind incident shock wave, including boundary layer correction; and perfectly stirred (highly backmixed) reactor. In addition, the chemical equilibrium state can be computed for the following assigned states: temperature and pressure, enthalpy and pressure, temperature and volume, and internal energy and volume. For static problems the code computes the sensitivity coefficients of the dependent variables and their temporal derivatives with respect to the initial values of the dependent variables and/or the three rate coefficient parameters of the chemical reactions.

Applications of American design codes for elevated temperature environment

International Nuclear Information System (INIS)

Severud, L.K.

1980-03-01

A brief summary of the ASME Code rules of Case N-47 is presented. An overview of the typical procedure used to demonstrate Code compliance is provided. Application experience and some examples of detailed inelastic analysis and simplified-approximate methods are given. Recent developments and future trends in design criteria and ASME Code rules are also presented

Code on the safety of nuclear power plants: Siting

International Nuclear Information System (INIS)

1988-01-01

This Code provides criteria and procedures that are recommended for safety in nuclear power plant siting. It forms part of the Agency's programme for establishing Codes and Safety Guides relating to land based stationary thermal neutron power plants

Innovations and Changes of Procedure Civil Code, and Maintenance of the Subjectivism Term "Resources Insufficient" for Granting of Justice of Gratuity

Directory of Open Access Journals (Sweden)

Juliane Dziubate Krefta

2016-10-01

Full Text Available This work is focused on the analysis of Gratuity of Justice as an important mechanism of access to justice. It aims to address the news about the Gratuity of Justice in the current Civil Procedure Code, recently amended by Law nº. 13,105/2015, bringing out important changes that fixed the obsolete Law nº. 1,060/50. Aims to reflect about the requirement for granting the benefit of free justice, namely the lack of resources, and its high degree of subjectivity, emphasizing some positive and negative issues related to it.

MCNP code

International Nuclear Information System (INIS)

Cramer, S.N.

1984-01-01

The MCNP code is the major Monte Carlo coupled neutron-photon transport research tool at the Los Alamos National Laboratory, and it represents the most extensive Monte Carlo development program in the United States which is available in the public domain. The present code is the direct descendent of the original Monte Carlo work of Fermi, von Neumaum, and Ulam at Los Alamos in the 1940s. Development has continued uninterrupted since that time, and the current version of MCNP (or its predecessors) has always included state-of-the-art methods in the Monte Carlo simulation of radiation transport, basic cross section data, geometry capability, variance reduction, and estimation procedures. The authors of the present code have oriented its development toward general user application. The documentation, though extensive, is presented in a clear and simple manner with many examples, illustrations, and sample problems. In addition to providing the desired results, the output listings give a a wealth of detailed information (some optional) concerning each state of the calculation. The code system is continually updated to take advantage of advances in computer hardware and software, including interactive modes of operation, diagnostic interrupts and restarts, and a variety of graphical and video aids

Validation of natural language processing to extract breast cancer pathology procedures and results

Directory of Open Access Journals (Sweden)

Arika E Wieneke

2015-01-01

Full Text Available Background: Pathology reports typically require manual review to abstract research data. We developed a natural language processing (NLP system to automatically interpret free-text breast pathology reports with limited assistance from manual abstraction. Methods: We used an iterative approach of machine learning algorithms and constructed groups of related findings to identify breast-related procedures and results from free-text pathology reports. We evaluated the NLP system using an all-or-nothing approach to determine which reports could be processed entirely using NLP and which reports needed manual review beyond NLP. We divided 3234 reports for development (2910, 90%, and evaluation (324, 10% purposes using manually reviewed pathology data as our gold standard. Results: NLP correctly coded 12.7% of the evaluation set, flagged 49.1% of reports for manual review, incorrectly coded 30.8%, and correctly omitted 7.4% from the evaluation set due to irrelevancy (i.e. not breast-related. Common procedures and results were identified correctly (e.g. invasive ductal with 95.5% precision and 94.0% sensitivity, but entire reports were flagged for manual review because of rare findings and substantial variation in pathology report text. Conclusions: The NLP system we developed did not perform sufficiently for abstracting entire breast pathology reports. The all-or-nothing approach resulted in too broad of a scope of work and limited our flexibility to identify breast pathology procedures and results. Our NLP system was also limited by the lack of the gold standard data on rare findings and wide variation in pathology text. Focusing on individual, common elements and improving pathology text report standardization may improve performance.

Use of Quantile Regression to Determine the Impact on Total Health Care Costs of Surgical Site Infections Following Common Ambulatory Procedures.

Science.gov (United States)

Olsen, Margaret A; Tian, Fang; Wallace, Anna E; Nickel, Katelin B; Warren, David K; Fraser, Victoria J; Selvam, Nandini; Hamilton, Barton H

2017-02-01

To determine the impact of surgical site infections (SSIs) on health care costs following common ambulatory surgical procedures throughout the cost distribution. Data on costs of SSIs following ambulatory surgery are sparse, particularly variation beyond just mean costs. We performed a retrospective cohort study of persons undergoing cholecystectomy, breast-conserving surgery, anterior cruciate ligament reconstruction, and hernia repair from December 31, 2004 to December 31, 2010 using commercial insurer claims data. SSIs within 90 days post-procedure were identified; infections during a hospitalization or requiring surgery were considered serious. We used quantile regression, controlling for patient, operative, and postoperative factors to examine the impact of SSIs on 180-day health care costs throughout the cost distribution. The incidence of serious and nonserious SSIs was 0.8% and 0.2%, respectively, after 21,062 anterior cruciate ligament reconstruction, 0.5% and 0.3% after 57,750 cholecystectomy, 0.6% and 0.5% after 60,681 hernia, and 0.8% and 0.8% after 42,489 breast-conserving surgery procedures. Serious SSIs were associated with significantly higher costs than nonserious SSIs for all 4 procedures throughout the cost distribution. The attributable cost of serious SSIs increased for both cholecystectomy and hernia repair as the quantile of total costs increased ($38,410 for cholecystectomy with serious SSI vs no SSI at the 70th percentile of costs, up to $89,371 at the 90th percentile). SSIs, particularly serious infections resulting in hospitalization or surgical treatment, were associated with significantly increased health care costs after 4 common surgical procedures. Quantile regression illustrated the differential effect of serious SSIs on health care costs at the upper end of the cost distribution.

Large-Scale Analysis of Remote Code Injection Attacks in Android Apps

Directory of Open Access Journals (Sweden)

Hyunwoo Choi

2018-01-01

Full Text Available It is pretty well known that insecure code updating procedures for Android allow remote code injection attack. However, other than codes, there are many resources in Android that have to be updated, such as temporary files, images, databases, and configurations (XML and JSON. Security of update procedures for these resources is largely unknown. This paper investigates general conditions for remote code injection attacks on these resources. Using this, we design and implement a static detection tool that automatically identifies apps that meet these conditions. We apply the detection tool to a large dataset comprising 9,054 apps, from three different types of datasets: official market, third-party market, and preinstalled apps. As a result, 97 apps were found to be potentially vulnerable, with 53 confirmed as vulnerable to remote code injection attacks.

A Systematic Review of Coding Systems Used in Pharmacoepidemiology and Database Research.

Science.gov (United States)

Chen, Yong; Zivkovic, Marko; Wang, Tongtong; Su, Su; Lee, Jianyi; Bortnichak, Edward A

2018-02-01

Clinical coding systems have been developed to translate real-world healthcare information such as prescriptions, diagnoses and procedures into standardized codes appropriate for use in large healthcare datasets. Due to the lack of information on coding system characteristics and insufficient uniformity in coding practices, there is a growing need for better understanding of coding systems and their use in pharmacoepidemiology and observational real world data research. To determine: 1) the number of available coding systems and their characteristics, 2) which pharmacoepidemiology databases are they adopted in, 3) what outcomes and exposures can be identified from each coding system, and 4) how robust they are with respect to consistency and validity in pharmacoepidemiology and observational database studies. Electronic literature database and unpublished literature searches, as well as hand searching of relevant journals were conducted to identify eligible articles discussing characteristics and applications of coding systems in use and published in the English language between 1986 and 2016. Characteristics considered included type of information captured by codes, clinical setting(s) of use, adoption by a pharmacoepidemiology database, region, and available mappings. Applications articles describing the use and validity of specific codes, code lists, or algorithms were also included. Data extraction was performed independently by two reviewers and a narrative synthesis was performed. A total of 897 unique articles and 57 coding systems were identified, 17% of which included country-specific modifications or multiple versions. Procedures (55%), diagnoses (36%), drugs (38%), and site of disease (39%) were most commonly and directly captured by these coding systems. The systems were used to capture information from the following clinical settings: inpatient (63%), ambulatory (55%), emergency department (ED, 34%), and pharmacy (13%). More than half of all coding

The Code of Criminal Procedure Brazilian Military: Ode or Requiem for the Inquisitorial System?

Directory of Open Access Journals (Sweden)

Nicanor Henrique Netto Armando

2015-12-01

Full Text Available This paper conducted a literature review aimed to identify the epistemological principles, social and political underlying the inquisitorial and adversarial procedural systems, which connect the characteristics of each of these systems, to investigate which of them matches the Criminal Procedure Code of Military (CPPM. The findings of the survey show that for a system to be characterize as libelous not just the separation of functions to accuse and judge. It is necessary to keep the separation for which the structure of dialectical process does not break, and the evidential initiative is always reserved for the parties. With regard to systems,the sticking point is the identification of its principle informer, for it is he who will determine if the system is inquisition regime or libelous, and not ancillary elements (orality, advertising, separation  of  activities.  The  process  aims  to  reconstruction  of  a  historical  fact,  the management of proof is erected the core founding or the unifying principle of a system. In this context, devices in the CPPM to give judge powers investigative denote the adoption of the principle inquisitive, who founded a system inquisition regime, because they represent a breach of equality, contradictory, the very structure of the dialectic process. Consequently, fulminam the main guarantee of urisdiction, which is the impartiality of the judge. With this, it is concluded that the CPPM is essentially inquisition regime. This study also (rethinking the need of dichotomization of criminal proceedings Brazilian, perquirindo if the duality of legislation on criminal proceedings is consistent with a current view of the process as a constitutional  model  that  ensures  the  enforcement  of fundamental rights by bases principiológicas jointly agreed to any process.

Allele coding in genomic evaluation

Directory of Open Access Journals (Sweden)

Christensen Ole F

2011-06-01

Full Text Available Abstract Background Genomic data are used in animal breeding to assist genetic evaluation. Several models to estimate genomic breeding values have been studied. In general, two approaches have been used. One approach estimates the marker effects first and then, genomic breeding values are obtained by summing marker effects. In the second approach, genomic breeding values are estimated directly using an equivalent model with a genomic relationship matrix. Allele coding is the method chosen to assign values to the regression coefficients in the statistical model. A common allele coding is zero for the homozygous genotype of the first allele, one for the heterozygote, and two for the homozygous genotype for the other allele. Another common allele coding changes these regression coefficients by subtracting a value from each marker such that the mean of regression coefficients is zero within each marker. We call this centered allele coding. This study considered effects of different allele coding methods on inference. Both marker-based and equivalent models were considered, and restricted maximum likelihood and Bayesian methods were used in inference. Results Theoretical derivations showed that parameter estimates and estimated marker effects in marker-based models are the same irrespective of the allele coding, provided that the model has a fixed general mean. For the equivalent models, the same results hold, even though different allele coding methods lead to different genomic relationship matrices. Calculated genomic breeding values are independent of allele coding when the estimate of the general mean is included into the values. Reliabilities of estimated genomic breeding values calculated using elements of the inverse of the coefficient matrix depend on the allele coding because different allele coding methods imply different models. Finally, allele coding affects the mixing of Markov chain Monte Carlo algorithms, with the centered coding being

Allele coding in genomic evaluation

DEFF Research Database (Denmark)

Standen, Ismo; Christensen, Ole Fredslund

2011-01-01

Genomic data are used in animal breeding to assist genetic evaluation. Several models to estimate genomic breeding values have been studied. In general, two approaches have been used. One approach estimates the marker effects first and then, genomic breeding values are obtained by summing marker...... effects. In the second approach, genomic breeding values are estimated directly using an equivalent model with a genomic relationship matrix. Allele coding is the method chosen to assign values to the regression coefficients in the statistical model. A common allele coding is zero for the homozygous...... genotype of the first allele, one for the heterozygote, and two for the homozygous genotype for the other allele. Another common allele coding changes these regression coefficients by subtracting a value from each marker such that the mean of regression coefficients is zero within each marker. We call...

25 CFR 11.503 - Applicable civil procedure.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Applicable civil procedure. 11.503 Section 11.503 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAW AND ORDER COURTS OF INDIAN OFFENSES AND LAW AND ORDER CODE Civil Actions § 11.503 Applicable civil procedure. The procedure to be followed in civil...

Towards Product Lining Model-Driven Development Code Generators

OpenAIRE

Roth, Alexander; Rumpe, Bernhard

2015-01-01

A code generator systematically transforms compact models to detailed code. Today, code generation is regarded as an integral part of model-driven development (MDD). Despite its relevance, the development of code generators is an inherently complex task and common methodologies and architectures are lacking. Additionally, reuse and extension of existing code generators only exist on individual parts. A systematic development and reuse based on a code generator product line is still in its inf...

Fine-mapping the HOXB region detects common variants tagging a rare coding allele: evidence for synthetic association in prostate cancer.

Directory of Open Access Journals (Sweden)

Edward J Saunders

2014-02-01

Full Text Available The HOXB13 gene has been implicated in prostate cancer (PrCa susceptibility. We performed a high resolution fine-mapping analysis to comprehensively evaluate the association between common genetic variation across the HOXB genetic locus at 17q21 and PrCa risk. This involved genotyping 700 SNPs using a custom Illumina iSelect array (iCOGS followed by imputation of 3195 SNPs in 20,440 PrCa cases and 21,469 controls in The PRACTICAL consortium. We identified a cluster of highly correlated common variants situated within or closely upstream of HOXB13 that were significantly associated with PrCa risk, described by rs117576373 (OR 1.30, P = 2.62×10(-14. Additional genotyping, conditional regression and haplotype analyses indicated that the newly identified common variants tag a rare, partially correlated coding variant in the HOXB13 gene (G84E, rs138213197, which has been identified recently as a moderate penetrance PrCa susceptibility allele. The potential for GWAS associations detected through common SNPs to be driven by rare causal variants with higher relative risks has long been proposed; however, to our knowledge this is the first experimental evidence for this phenomenon of synthetic association contributing to cancer susceptibility.

Coupling methods for parallel running RELAPSim codes in nuclear power plant simulation

Energy Technology Data Exchange (ETDEWEB)

Li, Yankai; Lin, Meng, E-mail: linmeng@sjtu.edu.cn; Yang, Yanhua

2016-02-15

When the plant is modeled detailedly for high precision, it is hard to achieve real-time calculation for one single RELAP5 in a large-scale simulation. To improve the speed and ensure the precision of simulation at the same time, coupling methods for parallel running RELAPSim codes were proposed in this study. Explicit coupling method via coupling boundaries was realized based on a data-exchange and procedure-control environment. Compromise of synchronization frequency was well considered to improve the precision of simulation and guarantee the real-time simulation at the same time. The coupling methods were assessed using both single-phase flow models and two-phase flow models and good agreements were obtained between the splitting–coupling models and the integrated model. The mitigation of SGTR was performed as an integral application of the coupling models. A large-scope NPP simulator was developed adopting six splitting–coupling models of RELAPSim and other simulation codes. The coupling models could improve the speed of simulation significantly and make it possible for real-time calculation. In this paper, the coupling of the models in the engineering simulator is taken as an example to expound the coupling methods, i.e., coupling between parallel running RELAPSim codes, and coupling between RELAPSim code and other types of simulation codes. However, the coupling methods are also referable in other simulator, for example, a simulator employing ATHLETE instead of RELAP5, other logic code instead of SIMULINK. It is believed the coupling method is commonly used for NPP simulator regardless of the specific codes chosen in this paper.

Methods for Ensuring High Quality of Coding of Cause of Death. The Mortality Register to Follow Southern Urals Populations Exposed to Radiation.

Science.gov (United States)

Startsev, N; Dimov, P; Grosche, B; Tretyakov, F; Schüz, J; Akleyev, A

2015-01-01

To follow up populations exposed to several radiation accidents in the Southern Urals, a cause-of-death registry was established at the Urals Center capturing deaths in the Chelyabinsk, Kurgan and Sverdlovsk region since 1950. When registering deaths over such a long time period, quality measures need to be in place to maintain quality and reduce the impact of individual coders as well as quality changes in death certificates. To ensure the uniformity of coding, a method for semi-automatic coding was developed, which is described here. Briefly, the method is based on a dynamic thesaurus, database-supported coding and parallel coding by two different individuals. A comparison of the proposed method for organizing the coding process with the common procedure of coding showed good agreement, with, at the end of the coding process, 70  - 90% agreement for the three-digit ICD -9 rubrics. The semi-automatic method ensures a sufficiently high quality of coding by at the same time providing an opportunity to reduce the labor intensity inherent in the creation of large-volume cause-of-death registries.

Ink-constrained halftoning with application to QR codes

Science.gov (United States)

Bayeh, Marzieh; Compaan, Erin; Lindsey, Theodore; Orlow, Nathan; Melczer, Stephen; Voller, Zachary

2014-01-01

This paper examines adding visually significant, human recognizable data into QR codes without affecting their machine readability by utilizing known methods in image processing. Each module of a given QR code is broken down into pixels, which are halftoned in such a way as to keep the QR code structure while revealing aspects of the secondary image to the human eye. The loss of information associated to this procedure is discussed, and entropy values are calculated for examples given in the paper. Numerous examples of QR codes with embedded images are included.

Goya - an MHD equilibrium code for toroidal plasmas

International Nuclear Information System (INIS)

Scheffel, J.

1984-09-01

A description of the GOYA free-boundary equilibrium code is given. The non-linear Grad-Shafranov equation of ideal MHD is solved in a toroidal geometry for plasmas with purely poloidal magnetic fields. The code is based on a field line-tracing procedure, making storage of a large amount of information on a grid unnecessary. Usage of the code is demonstrated by computations of equi/libria for the EXTRAP-T1 device. (Author)

Method for quantitative assessment of nuclear safety computer codes

International Nuclear Information System (INIS)

Dearien, J.A.; Davis, C.B.; Matthews, L.J.

1979-01-01

A procedure has been developed for the quantitative assessment of nuclear safety computer codes and tested by comparison of RELAP4/MOD6 predictions with results from two Semiscale tests. This paper describes the developed procedure, the application of the procedure to the Semiscale tests, and the results obtained from the comparison

Pipe elbow stiffness coefficients including shear and bend flexibility factors for use in direct stiffness codes

International Nuclear Information System (INIS)

Perry, R.F.

1977-01-01

Historically, developments of computer codes used for piping analysis were based upon the flexibility method of structural analysis. Because of the specialized techniques employed in this method, the codes handled systems composed of only piping elements. Over the past ten years, the direct stiffness method has gained great popularity because of its systematic solution procedure regardless of the type of structural elements composing the system. A great advantage is realized with a direct stiffness code that combines piping elements along with other structural elements such as beams, plates, and shells, in a single model. One common problem, however, has been the lack of an accurate pipe elbow element that would adequately represent the effects of transverse shear and bend flexibility factors. The purpose of the present paper is to present a systematic derivation of the required 12x12 stiffness matrix and load vectors for a three dimensional pipe elbow element which includes the effects of transverse shear and pipe bend flexibility according to the ASME Boiler and Pressure Vessel Code, Section III. The results are presented analytically and as FORTRAN subroutines to be directly incorporated into existing direct stiffness codes. (Auth.)

Dietary assessment of British police force employees: a description of diet record coding procedures and cross-sectional evaluation of dietary energy intake reporting (The Airwave Health Monitoring Study).

Science.gov (United States)

Gibson, Rachel; Eriksen, Rebeca; Lamb, Kathryn; McMeel, Yvonne; Vergnaud, Anne-Claire; Spear, Jeanette; Aresu, Maria; Chan, Queenie; Elliott, Paul; Frost, Gary

2017-04-04

Dietary intake is a key aspect of occupational health. To capture the characteristics of dietary behaviour that is affected by occupational environment that may affect disease risk, a collection of prospective multiday dietary records is required. The aims of this paper are to: (1) collect multiday dietary data in the Airwave Health Monitoring Study, (2) describe the dietary coding procedures applied and (3) investigate the plausibility of dietary reporting in this occupational cohort. A dietary coding protocol for this large-scale study was developed to minimise coding error rate. Participants (n 4412) who completed 7-day food records were included for cross-sectional analyses. Energy intake (EI) misreporting was estimated using the Goldberg method. Multivariate logistic regression models were applied to determine participant characteristics associated with EI misreporting. British police force employees enrolled (2007-2012) into the Airwave Health Monitoring Study. The mean code error rate per food diary was 3.7% (SD 3.2%). The strongest predictors of EI under-reporting were body mass index (BMI) and physical activity. Compared with participants with BMI30 kg/m 2 had increased odds of being classified as under-reporting EI (men OR 5.20 95% CI 3.92 to 6.89; women OR 2.66 95% CI 1.85 to 3.83). Men and women in the highest physical activity category compared with the lowest were also more likely to be classified as under-reporting (men OR 3.33 95% CI 2.46 to 4.50; women OR 4.34 95% CI 2.91 to 6.55). A reproducible dietary record coding procedure has been developed to minimise coding error in complex 7-day diet diaries. The prevalence of EI under-reporting is comparable with existing national UK cohorts and, in agreement with previous studies, classification of under-reporting was biased towards specific subgroups of participants. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Simulation of Water Chemistry using and Geochemistry Code, PHREEQE

Energy Technology Data Exchange (ETDEWEB)

Chi, J.H. [Korea Electric Power Research Institute, Taejeon (Korea)

2001-07-01

This report introduces principles and procedures of simulation for water chemistry using a geochemistry code, PHREEQE. As and example of the application of this code, we described the simulation procedure for titration of an aquatic sample with strong acid to investigate the state of Carbonates in aquatic solution. Major contents of this report are as follows; Concepts and principles of PHREEQE, Kinds of chemical reactions which may be properly simulated by PHREEQE, The definition and meaning of each input data, An example of simulation using PHREEQE. (author). 2 figs., 1 tab.

Toric codes and quantum doubles from two-body Hamiltonians

Energy Technology Data Exchange (ETDEWEB)

Brell, Courtney G; Bartlett, Stephen D; Doherty, Andrew C [Centre for Engineered Quantum Systems, School of Physics, University of Sydney, Sydney (Australia); Flammia, Steven T, E-mail: cbrell@physics.usyd.edu.au [Perimeter Institute for Theoretical Physics, Waterloo (Canada)

2011-05-15

We present here a procedure to obtain the Hamiltonians of the toric code and Kitaev quantum double models as the low-energy limits of entirely two-body Hamiltonians. Our construction makes use of a new type of perturbation gadget based on error-detecting subsystem codes. The procedure is motivated by a projected entangled pair states (PEPS) description of the target models, and reproduces the target models' behavior using only couplings that are natural in terms of the original Hamiltonians. This allows our construction to capture the symmetries of the target models.

Failed common bile duct cannulation during pregnancy: Rescue with endoscopic ultrasound guided rendezvous procedure.

Science.gov (United States)

Singla, Vikas; Arora, Anil; Tyagi, Pankaj; Sharma, Praveen; Bansal, Naresh; Kumar, Ashish

2016-01-01

Common bile duct (CBD) stones can lead to serious complications and require intervention with either endoscopic retrograde cholangiopancreatography (ERCP) or laparoscopic techniques for urgent relief. On an average 10%-20% of the patients with gall bladder stones can have associated CBD stones. CBD stones during pregnancy can be associated with hazardous complications for both the mother and the fetus. Failed cannulation while performing ERCP during pregnancy is a technically demanding situation, which requires immediate rescue with special techniques. Conventional rescue techniques may not be feasible and can be associated with hazardous consequences. Endoscopic ultrasound (EUS) guided rendezvous technique has now emerged as a safe alternative, and in one of our patients, this technique was successfully attempted. To the best of our knowledge, this is the first case report in the literature on EUS-guided rendezvous procedure during pregnancy.

Manual phased arrays for weld inspections using North American codes

International Nuclear Information System (INIS)

Moles, Michael

2008-01-01

Phased arrays are primarily a method of generating and receiving ultrasound, not a new technology. In addition, the physics of ultrasound generated by phased arrays is identical to that from conventional monocrystals. Not surprisingly, all the major North American (and some European) codes accept phased arrays, either explicitly or implicitly. However, the technique and procedures needs to be proven, typically by a Performance Demonstration. The ASME (AmeicanSociety for Mechanical Engineers) Section V and API RP2X explicitly accept phased arrays. Three ASME code cases have been written specifically fo manual phased array: Code Cases 2541. 2557 and 2558. Over and above the general requirements of Article 4, these Code Cases require full waveform calibration. This is echoed in ASTM E-2491, a Standard Guide for setting up phased arrays. In addition. details such as focusing and reporting are addressed. The American Petroleum Institute QUTE procedure did not need any modifications to be compatible with manual phased arrays. The American Welding Society (AWS) Structural Welding Code D1.1 implicitly accepts phased arrays. New technologies such as phased arrays can be proven using Annex K. Nonetheless, a manual phased array unit using the standard AWS probe and displaying 45, 60 and 70degrees waveforms would be acceptable for D1.1 a s is . Overall, most major North American codes accept phased arrays, however, the technique and procedures must be proven, often using a Performance Demonstration. (author)

AUTOET code (a code for automatically constructing event trees and displaying subsystem interdependencies)

International Nuclear Information System (INIS)

Wilson, J.R.; Burdick, G.R.

1977-06-01

This is a user's manual for AUTOET I and II. AUTOET I is a computer code for automatic event tree construction. It is designed to incorporate and display subsystem interdependencies and common or key component dependencies in the event tree format. The code is written in FORTRAN IV for the CDC Cyber 76 using the Integrated Graphics System (IGS). AUTOET II incorporates consequence and risk calculations, in addition to some other refinements. 5 figures

The Physical Models and Statistical Procedures Used in the RACER Monte Carlo Code

International Nuclear Information System (INIS)

Sutton, T.M.; Brown, F.B.; Bischoff, F.G.; MacMillan, D.B.; Ellis, C.L.; Ward, J.T.; Ballinger, C.T.; Kelly, D.J.; Schindler, L.

1999-01-01

This report describes the MCV (Monte Carlo - Vectorized)Monte Carlo neutron transport code [Brown, 1982, 1983; Brown and Mendelson, 1984a]. MCV is a module in the RACER system of codes that is used for Monte Carlo reactor physics analysis. The MCV module contains all of the neutron transport and statistical analysis functions of the system, while other modules perform various input-related functions such as geometry description, material assignment, output edit specification, etc. MCV is very closely related to the 05R neutron Monte Carlo code [Irving et al., 1965] developed at Oak Ridge National Laboratory. 05R evolved into the 05RR module of the STEMB system, which was the forerunner of the RACER system. Much of the overall logic and physics treatment of 05RR has been retained and, indeed, the original verification of MCV was achieved through comparison with STEMB results. MCV has been designed to be very computationally efficient [Brown, 1981, Brown and Martin, 1984b; Brown, 1986]. It was originally programmed to make use of vector-computing architectures such as those of the CDC Cyber- 205 and Cray X-MP. MCV was the first full-scale production Monte Carlo code to effectively utilize vector-processing capabilities. Subsequently, MCV was modified to utilize both distributed-memory [Sutton and Brown, 1994] and shared memory parallelism. The code has been compiled and run on platforms ranging from 32-bit UNIX workstations to clusters of 64-bit vector-parallel supercomputers. The computational efficiency of the code allows the analyst to perform calculations using many more neutron histories than is practical with most other Monte Carlo codes, thereby yielding results with smaller statistical uncertainties. MCV also utilizes variance reduction techniques such as survival biasing, splitting, and rouletting to permit additional reduction in uncertainties. While a general-purpose neutron Monte Carlo code, MCV is optimized for reactor physics calculations. It has the

Short binary convolutional codes with maximal free distance for rates 2/3 and 3/4

DEFF Research Database (Denmark)

Paaske, Erik

1974-01-01

. Farther, the search among the remaining codes is started in a subset in which we expect the possibility of finding codes with large values ofd_{free}to be good. A number of short, optimum (in the sense of maximizingd_{free}), rate-2/3 and 3/4 codes found by the search procedure are listed.......A search procedure is developed to find good short binary(N,N - 1)convolutional codes. It uses simple rules to discard from the complete ensemble of codes a large fraction whose free distanced_{free}either cannot achieve the maximum value or is equal tod_{free}of some code in the remaining set...

Exposure calculation code module for reactor core analysis: BURNER

Energy Technology Data Exchange (ETDEWEB)

Vondy, D.R.; Cunningham, G.W.

1979-02-01

The code module BURNER for nuclear reactor exposure calculations is presented. The computer requirements are shown, as are the reference data and interface data file requirements, and the programmed equations and procedure of calculation are described. The operating history of a reactor is followed over the period between solutions of the space, energy neutronics problem. The end-of-period nuclide concentrations are determined given the necessary information. A steady state, continuous fueling model is treated in addition to the usual fixed fuel model. The control options provide flexibility to select among an unusually wide variety of programmed procedures. The code also provides user option to make a number of auxiliary calculations and print such information as the local gamma source, cumulative exposure, and a fine scale power density distribution in a selected zone. The code is used locally in a system for computation which contains the VENTURE diffusion theory neutronics code and other modules.

Exposure calculation code module for reactor core analysis: BURNER

International Nuclear Information System (INIS)

Vondy, D.R.; Cunningham, G.W.

1979-02-01

The code module BURNER for nuclear reactor exposure calculations is presented. The computer requirements are shown, as are the reference data and interface data file requirements, and the programmed equations and procedure of calculation are described. The operating history of a reactor is followed over the period between solutions of the space, energy neutronics problem. The end-of-period nuclide concentrations are determined given the necessary information. A steady state, continuous fueling model is treated in addition to the usual fixed fuel model. The control options provide flexibility to select among an unusually wide variety of programmed procedures. The code also provides user option to make a number of auxiliary calculations and print such information as the local gamma source, cumulative exposure, and a fine scale power density distribution in a selected zone. The code is used locally in a system for computation which contains the VENTURE diffusion theory neutronics code and other modules

RFQ simulation code

International Nuclear Information System (INIS)

Lysenko, W.P.

1984-04-01

We have developed the RFQLIB simulation system to provide a means to systematically generate the new versions of radio-frequency quadrupole (RFQ) linac simulation codes that are required by the constantly changing needs of a research environment. This integrated system simplifies keeping track of the various versions of the simulation code and makes it practical to maintain complete and up-to-date documentation. In this scheme, there is a certain standard version of the simulation code that forms a library upon which new versions are built. To generate a new version of the simulation code, the routines to be modified or added are appended to a standard command file, which contains the commands to compile the new routines and link them to the routines in the library. The library itself is rarely changed. Whenever the library is modified, however, this modification is seen by all versions of the simulation code, which actually exist as different versions of the command file. All code is written according to the rules of structured programming. Modularity is enforced by not using COMMON statements, simplifying the relation of the data flow to a hierarchy diagram. Simulation results are similar to those of the PARMTEQ code, as expected, because of the similar physical model. Different capabilities, such as those for generating beams matched in detail to the structure, are available in the new code for help in testing new ideas in designing RFQ linacs

Quality Assurance for Thermal Hydraulic Analysis Code, TASS/SMR-S

International Nuclear Information System (INIS)

Kim, Hee Kyung; Kim, Soo Hyoung; Chung, Young Jong; Kim, Hyeon Soo

2012-01-01

Safety analysis for a System-integrated Modular Advanced Reactor (SMART), a computer code called TASS/SMR-S has been developed by Korea Atomic Energy Research Institute (KAERI). To guarantee the quality of the software, a series of software Quality Assurance (QA) procedures has been developed for the TASS/SMR-S code. These procedures are described herein, from the requirement phase to the Verification and Validation (V and V) phase, and representative results of the TASS/SMR-S QA are presented

Formalizing the Austrian Procedure Catalogue: A 4-step methodological analysis approach.

Science.gov (United States)

Neururer, Sabrina Barbara; Lasierra, Nelia; Peiffer, Karl Peter; Fensel, Dieter

2016-04-01

Due to the lack of an internationally accepted and adopted standard for coding health interventions, Austria has established its own country-specific procedure classification system - the Austrian Procedure Catalogue (APC). Even though the APC is an elaborate coding standard for medical procedures, it has shortcomings that limit its usability. In order to enhance usability and usefulness, especially for research purposes and e-health applications, we developed an ontologized version of the APC. In this paper we present a novel four-step approach for the ontology engineering process, which enables accurate extraction of relevant concepts for medical ontologies from written text. The proposed approach for formalizing the APC consists of the following four steps: (1) comparative pre-analysis, (2) definition analysis, (3) typological analysis, and (4) ontology implementation. The first step contained a comparison of the APC to other well-established or elaborate health intervention coding systems in order to identify strengths and weaknesses of the APC. In the second step, a list of definitions of medical terminology used in the APC was obtained. This list of definitions was used as input for Step 3, in which we identified the most important concepts to describe medical procedures using the qualitative typological analysis approach. The definition analysis as well as the typological analysis are well-known and effective methods used in social sciences, but not commonly employed in the computer science or ontology engineering domain. Finally, this list of concepts was used in Step 4 to formalize the APC. The pre-analysis highlighted the major shortcomings of the APC, such as the lack of formal definition, leading to implicitly available, but not directly accessible information (hidden data), or the poor procedural type classification. After performing the definition and subsequent typological analyses, we were able to identify the following main characteristics of

Review of SKB's Code Documentation and Testing

International Nuclear Information System (INIS)

Hicks, T.W.

2005-01-01

evolution. Poly3D - a displacement discontinuity model developed at Stanford University and used by SKB to study the effects of movement on fractures that intersect canister deposition holes. UDEC, 3DEC, FLAC, and FLAC3D - geotechnical models developed by HCItasca, and used by SKB in thermo-hydro-mechanical analysis of repository host rock. M3 - a multivariate mixing and mass balance model developed by SKB to study the evolution of groundwater composition. The commercially available codes (CONNECTFLOW, ABAQUS, Poly3D, UDEC, 3DEC, FLAC, and FLAC3D) appear to have been subject to extensive testing, and the wide international usage of these codes offers a high level of confidence that they are fit for intended purpose. However, SKB has modified or developed some commercial codes in-house, and it is unclear whether these developments have become an integral part of, and have been subject to similar levels of testing as, the main code. Greater confidence in the applicability of the modified forms of these codes could be achieved if clear information on code usage and verification were available. Varying standards of code documentation have been identified for the SKB codes COMP23, FARF31, PROPER, the analytical radionuclide transport code, DarcyTools, and M3. The recent DarcyTools reports are of a high standard, providing comprehensive information on the model basis, code usage, and code verification and validation. User's guides and verification reports should be developed for all of SKB's codes that are of a similar standard to the DarcyTools documents and are consistent with appropriate software quality assurance (QA) procedures. To develop a greater understanding of suitable software documentation and testing standards, a brief review has been undertaken of software QA requirements in other radioactive waste disposal programmes. The review has provided useful insights into the type of code documentation that might be expected to accompany the submission of a repository

Review and assessment of thermodynamic and transport properties for the CONTAIN Code

International Nuclear Information System (INIS)

Valdez, G.D.

1988-12-01

A study was carried out to review available data and correlations on the thermodynamic and transport properties of materials applicable to the CONTAIN computer code. CONTAIN is the NRC's best-estimate, mechanistic computer code for modeling containment response to a severe accident. Where appropriate, recommendations have been made for suitable approximations for material properties of interests. Based on a modified Benedict-Webb-Rubin (BWR) equation of state, a procedure is introduced for calculating thermodynamic properties for common gases in the CONTAIN code. These gases are nitrogen, oxygen, hydrogen, carbon dioxide, carbon monoxide, steam, helium, and argon. The thermodynamic equations for density, currently represented in CONTAIN by relatively simple fits, were independently checked and are recommended to be replaced by the Lee-Kesler equation of state which substantially improves accuracy without too much sacrifice in computational efficiency. The accuracy of the calculated values have been found to be generally acceptable. Various correlations and models for single component gas transport properties, viscosity and thermal conductivity, were also assessed with available experimental data. When a suitable correlation or model was not available, transport properties were obtained by performing least-squares fit on experimental data. 50 refs., 126 figs., 3 tabs

MDEP Common Position CP-VICWG-01. Common Position: Establishment of Common QA/QM Criteria for the Multinational Vendor Inspection CP-VICWG-01

International Nuclear Information System (INIS)

2015-01-01

This document provides a set of common positions for harmonizing inspection criteria called 'Common QA/QM Criteria' which will be used in Multinational Vendor Inspections. This document was prepared by the Vendor Inspection Co-operation Working Group (VICWG) of the Multinational Design Evaluation Program (MDEP). The 'Common QA/QM Criteria' provides the basic areas for consideration when performing Vendor Inspections. The criteria have been developed in conformity with International Codes and Standards such as IAEA, ISO, etc. that MDEP member countries have adopted

Identifying Adverse Events Using International Classification of Diseases, Tenth Revision Y Codes in Korea: A Cross-sectional Study

Directory of Open Access Journals (Sweden)

Minsu Ock

2018-01-01

Full Text Available Objectives The use of administrative data is an affordable alternative to conducting a difficult large-scale medical-record review to estimate the scale of adverse events. We identified adverse events from 2002 to 2013 on the national level in Korea, using International Classification of Diseases, tenth revision (ICD-10 Y codes. Methods We used data from the National Health Insurance Service-National Sample Cohort (NHIS-NSC. We relied on medical treatment databases to extract information on ICD-10 Y codes from each participant in the NHIS-NSC. We classified adverse events in the ICD-10 Y codes into 6 types: those related to drugs, transfusions, and fluids; those related to vaccines and immunoglobulin; those related to surgery and procedures; those related to infections; those related to devices; and others. Results Over 12 years, a total of 20 817 adverse events were identified using ICD-10 Y codes, and the estimated total adverse event rate was 0.20%. Between 2002 and 2013, the total number of such events increased by 131.3%, from 1366 in 2002 to 3159 in 2013. The total rate increased by 103.9%, from 0.17% in 2002 to 0.35% in 2013. Events related to drugs, transfusions, and fluids were the most common (19 446, 93.4%, followed by those related to surgery and procedures (1209, 5.8% and those related to vaccines and immunoglobulin (72, 0.3%. Conclusions Based on a comparison with the results of other studies, the total adverse event rate in this study was significantly underestimated. Improving coding practices for ICD-10 Y codes is necessary to precisely monitor the scale of adverse events in Korea.

The Expanding Role of Advanced Practice Providers in Urologic Procedural Care.

Science.gov (United States)

Langston, Joshua P; Duszak, Richard; Orcutt, Venetia L; Schultz, Heather; Hornberger, Brad; Jenkins, Lawrence C; Hemingway, Jennifer; Hughes, Danny R; Pruthi, Raj S; Nielsen, Matthew E

2017-08-01

To understand the role of Advanced Practice Providers (APPs) in urologic procedural care and its change over time. As the population ages and the urologic workforce struggles to meet patient access demands, the role of APPs in the provision of all aspects of urologic care is increasing. However, little is currently known about their role in procedural care. Commonly performed urologic procedures were linked to Current Procedural Terminology (CPT) codes from 1994 to 2012. National Medicare Part B beneficiary claims frequency was identified using Physician Supplier Procedure Summary Master Files. Trends were studied for APPs, urologists, and all other providers nationally across numerous procedures spanning complexity, acuity, and technical skill set requirements. Between 1994 and 2012, annual Medicare claims for urologic procedures by APPs increased dramatically. Cystoscopy increased from 24 to 1820 (+7483%), transrectal prostate biopsy from 17 to 834 (+4806%), complex Foley catheter placement from 471 to 2929 (+522%), urodynamics testing from 41 to 9358 (+22,727%), and renal ultrasound from 18 to 4500 (+24,900%) CONCLUSION: We found dramatic growth in the provision of urologic procedural care by APPs over the past 2 decades. These data reinforce the known expansion of the APP role in urology and support the timeliness of ongoing collaborative multidisciplinary educational efforts to address unmet needs in education, training, and guideline formation to maximize access to urologic procedural services. Copyright © 2017 Elsevier Inc. All rights reserved.

Peripheral Codes in ASTRA for the TJ-II

International Nuclear Information System (INIS)

Lopez-Bruna, D.; Reynolds, J. M.; Cappa, A.; Martinell, J.; Garcia, J.; Gutierrez-Tapia, C.

2010-01-01

The study of data from the TJ-II device is often done with transport calculations based on the ASTRA transport system. However, complicated independent codes are used to obtain fundamental ingredients in these calculations, such as the particle and/or energy sources. These codes are accessible from ASTRA through the procedures explained in this report. (Author) 37 refs.

Verification of the LWRARC code for light-water-reactor afterheat rate calculations

International Nuclear Information System (INIS)

Murphy, B.D.

1998-02-01

This report describes verification studies carried out on the LWRARC (Light-Water-Reactor Afterheat Rate Calculations) computer code. The LWRARC code is proposed for automating the implementation of procedures specified in Draft Revision 1 of the U.S. Nuclear Regulatory Commission (NRC) Regulatory Guide 3.54, open-quotes Spent-Fuel Heat Generation in an Independent Spent-Fuel Storage Installation,close quotes which gives guidelines on the calculation of decay heat for spent nuclear fuel. Draft Regulatory Guide 3.54 allows one to estimate decay-heat values by means of a table lookup procedure with interpolation performed between table-entry values. The tabulated values of the relevant parameters span ranges that are appropriate for spent fuel from a boiling-water reactor (BWR) or a pressurized-water reactor (PWR), as the case may be, and decay-heat rates are obtained for spent fuel whose properties are within those parameter limits. In some instances, where these limits are either exceeded or where they approach critical regions, adjustments are invoked following table lookup. The LWRARC computer code is intended to replicate the manual process just described. In the code, the table lookup is done by entering a database and carrying out interpolations. The code then determines if adjustments apply, and, if this is the case, adjustment factors are calculated separately. The manual procedures in the Draft Regulatory Guide have been validated (i.e., they produce results that are good estimates of reality). The work reported in this document verifies that the LWRARC code replicates the manual procedures of the Draft Regulatory Guide, and that the code, taken together with the Draft Regulatory Guide, can support both verification and validation processes

Code OK3 - An upgraded version of OK2 with beam wobbling function

Science.gov (United States)

Ogoyski, A. I.; Kawata, S.; Popov, P. H.

2010-07-01

structure, including beam wobbling function. Reasons for new version: The code OK3 is based on OK2 [3] and uses the same algorithm with some improvements, the most important one is the beam wobbling function. Summary of revisions:In the code OK3, beams are subdivided on many bunches. The displacement of each bunch center from the initial beam direction is calculated. Code OK3 allows the beamlet number to vary from bunch to bunch. That reduces the calculation error especially in case of very complicated mesh structure with big internal holes. The target temperature rises during the time of energy deposition. Some procedures are improved to perform faster. The energy conservation is checked up on each step of calculation process and corrected if necessary. New procedures included in OK3 Procedure BeamCenterRot( ) rotates the beam axis around the impinging direction of each beam. Procedure BeamletRot( ) rotates the beamlet axes that belong to each beam. Procedure Rotation( ) sets the coordinates of rotated beams and beamlets in chamber and pellet systems. Procedure BeamletOut( ) calculates the lost energy of ions that have not impinged on the target. Procedure TargetT( ) sets the temperature of the target layer of energy deposition during the irradiation process. Procedure ECL( ) checks up the energy conservation law at each step of the energy deposition process. Procedure ECLt( ) performs the final check up of the energy conservation law at the end of deposition process. Modified procedures in OK3 Procedure InitBeam( ): This procedure initializes the beam radius and coefficients A1, A2, A3, A4 and A5 for Gauss distributed beams [2]. It is enlarged in OK3 and can set beams with radii from 1 to 20 mm. Procedure kBunch( ) is modified to allow beamlet number variation from bunch to bunch during the deposition. Procedure ijkSp( ) and procedure Hole( ) are modified to perform faster. Procedure Espl( ) and procedure ChechE( ) are modified to increase the calculation accuracy

Conceptual Design of Object Oriented Program (OOP) for Pilot Code of Two-Fluid, Three-field Model with C++ 6.0

International Nuclear Information System (INIS)

Chung, Bub Dong; Lee, Young Jin

2006-01-01

Engineering software for design purpose in nuclear industries have been developed since early 1970s, and well established in 1980s. The most popular and common language for the software development has been FORTRAN series, until the more sophisticated GUI and software coupling is needed. The advanced computer language, such as C++, C has been developed to help the programming for the easy GUI need and reuse of well developed routines, with adopting the objective oriented program. A recent trend of programming becomes objective-oriented since the results are often more intuitive and easier to maintain than procedure program. The main motivation of this work is to capture objective oriented concepts for conventional safety analysis programs which consist of many functions and procedure oriented structures. In this work, the new objective programming with C++ 6.0 language has been tried for the PILOT code written in FORTRAN language, and conceptual OOP design of the system safety analysis code has been done

A procedure for searching the equilibrium core of a research reactor

International Nuclear Information System (INIS)

Bakri Arbie; Liem Peng Hong; Prayoto

1996-01-01

A procedure for searching the equilibrium core of a research reactor has been proposed. The searching procedure is based on the relaxation method and has been implemented in Batan-EQUIL-2D in-core fuel management code. The few-group neutron diffusion theory in 2-D, X-Y, and R-Z reactor geometries are adopted as the framework of the code. The successful applicability of the procedure for obtaining the new RSG-GAS (MPR-30) silicide equilibrium core was shown. (author)

A qualitative study of DRG coding practice in hospitals under the Thai Universal Coverage scheme.

Science.gov (United States)

Pongpirul, Krit; Walker, Damian G; Winch, Peter J; Robinson, Courtland

2011-04-08

In the Thai Universal Coverage health insurance scheme, hospital providers are paid for their inpatient care using Diagnosis Related Group-based retrospective payment, for which quality of the diagnosis and procedure codes is crucial. However, there has been limited understandings on which health care professions are involved and how the diagnosis and procedure coding is actually done within hospital settings. The objective of this study is to detail hospital coding structure and process, and to describe the roles of key hospital staff, and other related internal dynamics in Thai hospitals that affect quality of data submitted for inpatient care reimbursement. Research involved qualitative semi-structured interview with 43 participants at 10 hospitals chosen to represent a range of hospital sizes (small/medium/large), location (urban/rural), and type (public/private). Hospital Coding Practice has structural and process components. While the structural component includes human resources, hospital committee, and information technology infrastructure, the process component comprises all activities from patient discharge to submission of the diagnosis and procedure codes. At least eight health care professional disciplines are involved in the coding process which comprises seven major steps, each of which involves different hospital staff: 1) Discharge Summarization, 2) Completeness Checking, 3) Diagnosis and Procedure Coding, 4) Code Checking, 5) Relative Weight Challenging, 6) Coding Report, and 7) Internal Audit. The hospital coding practice can be affected by at least five main factors: 1) Internal Dynamics, 2) Management Context, 3) Financial Dependency, 4) Resource and Capacity, and 5) External Factors. Hospital coding practice comprises both structural and process components, involves many health care professional disciplines, and is greatly varied across hospitals as a result of five main factors.

User's manual for EXALPHA (a code for calculating electronic properties of molecules). [Muscatel code, multiply scattered electron approximation

Energy Technology Data Exchange (ETDEWEB)

Jones, H.D.

1976-06-01

The EXALPHA procedures provide a simplified method for running the MUSCATEL computer code, which in turn is used for calculating electronic properties of simple molecules and atomic clusters, based on the multiply scattered electron approximation for the wave equations. The use of the EXALPHA procedures to set up a run of MUSCATEL is described.

A procedure for effective Dancoff factor calculation

International Nuclear Information System (INIS)

Milosevic, M.

2001-01-01

In this paper, a procedure for Dancoff factors calculation based on equivalence principle and its application in the SCALE-4.3 code system is described. This procedure is founded on principle of conservation of neutron absorption for resolved resonance range in a heterogeneous medium and an equivalent medium consisted of an infinite array of two-region pin cells, where the presence of other fuel rods is taken into account through a Dancoff factor. The neutron absorption in both media is obtained using a fine-group elastic slowing-down calculation. This procedure is implemented in a design oriented lattice physics code, which is applicable for any geometry where the method of collision probability is possible to apply to get a flux solution. Proposed procedure was benchmarked for recent exercise that represents a system with a fuel double heterogeneity, i.e., fuel in solid form (pellets) surrounded by fissile material in solution, and for a 5x5 irregular pressurised water reactor assembly, which requires different Dancoff factors. (author)

Automatic coding of online collaboration protocols

NARCIS (Netherlands)

Erkens, Gijsbert; Janssen, J.J.H.M.

2006-01-01

An automatic coding procedure is described to determine the communicative functions of messages in chat discussions. Five main communicative functions are distinguished: argumentative (indicating a line of argumentation or reasoning), responsive (e.g., confirmations, denials, and answers),

The computer code SEURBNUK/EURDYN. Pt. 2

International Nuclear Information System (INIS)

Yerkess, A.; Broadhouse, B.J.; Smith, B.L.

1987-01-01

SEURBNUK-2 is a two-dimensional, axisymmetric, Eulerian, finite difference containment code. The numerical procedure adopted in SEURBNUK to solve the hydrodynamic equations is based on the semi-implicit ICE method which itself is an extension of the MAC algorithm. SEURBNUK has a finite difference thin shell treatment for vessels and internal structures of arbitrary shape and includes the effects of the compressibility of the fluid. Fluid flow through porous media and porous structures can also be accommodated. SEURBNUK/EURDYN is an extension of SEURBNUK-2 in which the finite difference thin shell treatment is replaced by a finite element calculation for both thin or thick structures. This has been achieved by coupling the shell elements and axisymmetric triangular elements. Within the code, the equations of motion for the structures are solved quite separately from those for the fluid, and the timestep for the fluid can be an integer multiple of that for the structures. The interaction of the structures with the fluid is then considered as a modification to the coefficients in the pressure equations, the modifications naturally depending on the behaviour of the structures within the fluid cell. The code is limited to dealing with a single fluid, the coolant, and the bubble and the cover gas are treated as cavities of uniform pressure calculated via appropriate pressure-volume-energy relationships. This manual describes the input data specifications needed for the execution of SEURBNUK/EURDYN calculations. After explaining the output facilities information is included to aid users to avoid some common pit-falls

FONESYS: The FOrum and NEtwork of SYStem Thermal-Hydraulic Codes in Nuclear Reactor Thermal-Hydraulics

Energy Technology Data Exchange (ETDEWEB)

Ahn, S.H., E-mail: k175ash@kins.re.kr [Korea Institute of Nuclear Safety (KINS) (Korea, Republic of); Aksan, N., E-mail: nusr.aksan@gmail.com [University of Pisa San Piero a Grado Nuclear Research Group (GRNSPG) (Italy); Austregesilo, H., E-mail: henrique.austregesilo@grs.de [Gesellschaft für Anlagen- und Reaktorsicherheit (GRS) (Germany); Bestion, D., E-mail: dominique.bestion@cea.fr [Commissariat à l’énergie atomique et aux énergies alternatives (CEA) (France); Chung, B.D., E-mail: bdchung@kaeri.re.kr [Korea Atomic Energy Research Institute (KAERI) (Korea, Republic of); D’Auria, F., E-mail: f.dauria@ing.unipi.it [University of Pisa San Piero a Grado Nuclear Research Group (GRNSPG) (Italy); Emonot, P., E-mail: philippe.emonot@cea.fr [Commissariat à l’énergie atomique et aux énergies alternatives (CEA) (France); Gandrille, J.L., E-mail: jeanluc.gandrille@areva.com [AREVA NP (France); Hanninen, M., E-mail: markku.hanninen@vtt.fi [VTT Technical Research Centre of Finland (VTT) (Finland); Horvatović, I., E-mail: i.horvatovic@ing.unipi.it [University of Pisa San Piero a Grado Nuclear Research Group (GRNSPG) (Italy); Kim, K.D., E-mail: kdkim@kaeri.re.kr [Korea Atomic Energy Research Institute (KAERI) (Korea, Republic of); Kovtonyuk, A., E-mail: a.kovtonyuk@ing.unipi.it [University of Pisa San Piero a Grado Nuclear Research Group (GRNSPG) (Italy); Petruzzi, A., E-mail: a.petruzzi@ing.unipi.it [University of Pisa San Piero a Grado Nuclear Research Group (GRNSPG) (Italy)

2015-01-15

Highlights: • We briefly presented the project called Forum and Network of System Thermal-Hydraulics Codes in Nuclear Reactor Thermal-Hydraulics (FONESYS). • We presented FONESYS participants and their codes. • We explained FONESYS projects motivation, its main targets and working modalities. • We presented FONESYS position about projects topics and subtopics. - Abstract: The purpose of this article is to present briefly the project called Forum and Network of System Thermal-Hydraulics Codes in Nuclear Reactor Thermal-Hydraulics (FONESYS), its participants, the motivation for the project, its main targets and working modalities. System Thermal-Hydraulics (SYS-TH) codes, also as part of the Best Estimate Plus Uncertainty (BEPU) approaches, are expected to achieve a more-and-more relevant role in nuclear reactor technology, safety and design. Namely, the number of code-users can easily be predicted to increase in the countries where nuclear technology is exploited. Thus, the idea of establishing a forum and a network among the code developers and with possible extension to code users has started to have major importance and value. In this framework the FONESYS initiative has been created. The main targets of FONESYS are: • To promote the use of SYS-TH Codes and the application of the BEPU approaches. • To establish acceptable and recognized procedures and thresholds for Verification and Validation (V and V). • To create a common ground for discussing envisaged improvements in various areas, including user-interface, and the connection with other numerical tools, including Computational Fluid Dynamics (CFD) Codes.

Evaluation of three coding schemes designed for improved data communication

Science.gov (United States)

Snelsire, R. W.

1974-01-01

Three coding schemes designed for improved data communication are evaluated. Four block codes are evaluated relative to a quality function, which is a function of both the amount of data rejected and the error rate. The Viterbi maximum likelihood decoding algorithm as a decoding procedure is reviewed. This evaluation is obtained by simulating the system on a digital computer. Short constraint length rate 1/2 quick-look codes are studied, and their performance is compared to general nonsystematic codes.

User's manual of Tokamak Simulation Code

International Nuclear Information System (INIS)

Nakamura, Yukiharu; Nishino, Tooru; Tsunematsu, Toshihide; Sugihara, Masayoshi.

1992-12-01

User's manual for use of Tokamak Simulation Code (TSC), which simulates the time-evolutional process of deformable motion of axisymmetric toroidal plasma, is summarized. For the use at JAERI computer system, the TSC is linked with the data management system GAEA. This manual is forcused on the procedure for the input and output by using the GAEA system. Model equations to give axisymmetric motion, outline of code system, optimal method to get the well converged solution are also described. (author)

47 CFR 52.19 - Area code relief.

Science.gov (United States)

2010-10-01

... meetings to which the telecommunications industry and the public are invited on area code relief for a... 47 Telecommunication 3 2010-10-01 2010-10-01 false Area code relief. 52.19 Section 52.19 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) NUMBERING...

APPC - A new standardised coding system for trans-organisational PACS retrieval

International Nuclear Information System (INIS)

Fruehwald, F.; Lindner, A.; Mostbeck, G.; Hruby, W.; Fruehwald-Pallamar, J.

2010-01-01

As part of a general strategy to integrate the health care enterprise, Austria plans to connect the Picture Archiving and Communication Systems (PACS) of all radiological institutions into a nationwide network. To facilitate the search for relevant correlative imaging data in the PACS of different organisations, a coding system was compiled for all radiological procedures and necessary anatomical details. This code, called the Austrian PACS Procedure Code (APPC), was granted the status of a standard under HL7. Examples are provided of effective coding and filtering when searching for relevant imaging material using the APPC, as well as the planned process for future adjustments of the APPC. The implementation and how the APPC will fit into the future electronic environment, which will include an electronic health act for all citizens in Austria, are discussed. A comparison to other nationwide electronic health record projects and coding systems is given. Limitations and possible use in physical storage media are contemplated. (orig.)

Common-Message Broadcast Channels with Feedback in the Nonasymptotic Regime: Full Feedback

DEFF Research Database (Denmark)

Trillingsgaard, Kasper Fløe; Yang, Wei; Durisi, Giuseppe

2018-01-01

We investigate the maximum coding rate achievable on a two-user broadcast channel for the case where a common message is transmitted with feedback using either fixed-blocklength codes or variable-length codes. For the fixed-blocklength-code setup, we establish nonasymptotic converse and achievabi......We investigate the maximum coding rate achievable on a two-user broadcast channel for the case where a common message is transmitted with feedback using either fixed-blocklength codes or variable-length codes. For the fixed-blocklength-code setup, we establish nonasymptotic converse...... and achievability bounds. An asymptotic analysis of these bounds reveals that feedback improves the second-order term compared to the no-feedback case. In particular, for a certain class of anti-symmetric broadcast channels, we show that the dispersion is halved. For the variable-length-code setup, we demonstrate...

Content layer progressive coding of digital maps

DEFF Research Database (Denmark)

Forchhammer, Søren; Jensen, Ole Riis

2000-01-01

A new lossless context based method is presented for content progressive coding of limited bits/pixel images, such as maps, company logos, etc., common on the WWW. Progressive encoding is achieved by separating the image into content layers based on other predefined information. Information from...... already coded layers are used when coding subsequent layers. This approach is combined with efficient template based context bi-level coding, context collapsing methods for multi-level images and arithmetic coding. Relative pixel patterns are used to collapse contexts. The number of contexts are analyzed....... The new methods outperform existing coding schemes coding digital maps and in addition provide progressive coding. Compared to the state-of-the-art PWC coder, the compressed size is reduced to 60-70% on our layered test images....

A qualitative study of DRG coding practice in hospitals under the Thai Universal Coverage Scheme

Directory of Open Access Journals (Sweden)

Winch Peter J

2011-04-01

Full Text Available Abstract Background In the Thai Universal Coverage health insurance scheme, hospital providers are paid for their inpatient care using Diagnosis Related Group-based retrospective payment, for which quality of the diagnosis and procedure codes is crucial. However, there has been limited understandings on which health care professions are involved and how the diagnosis and procedure coding is actually done within hospital settings. The objective of this study is to detail hospital coding structure and process, and to describe the roles of key hospital staff, and other related internal dynamics in Thai hospitals that affect quality of data submitted for inpatient care reimbursement. Methods Research involved qualitative semi-structured interview with 43 participants at 10 hospitals chosen to represent a range of hospital sizes (small/medium/large, location (urban/rural, and type (public/private. Results Hospital Coding Practice has structural and process components. While the structural component includes human resources, hospital committee, and information technology infrastructure, the process component comprises all activities from patient discharge to submission of the diagnosis and procedure codes. At least eight health care professional disciplines are involved in the coding process which comprises seven major steps, each of which involves different hospital staff: 1 Discharge Summarization, 2 Completeness Checking, 3 Diagnosis and Procedure Coding, 4 Code Checking, 5 Relative Weight Challenging, 6 Coding Report, and 7 Internal Audit. The hospital coding practice can be affected by at least five main factors: 1 Internal Dynamics, 2 Management Context, 3 Financial Dependency, 4 Resource and Capacity, and 5 External Factors. Conclusions Hospital coding practice comprises both structural and process components, involves many health care professional disciplines, and is greatly varied across hospitals as a result of five main factors.

Automated procedure for calculating time-dependent sensitivities in ORIGEN2

International Nuclear Information System (INIS)

Worley, B.A.; Wright, R.Q.

1985-10-01

ORIGEN2 is a widely used point-depletion and radioactive-decay computer code for use in simulating nuclear fuel cycles and/or spent fuel characteristics. This paper presents the application of the GRESS procedure to the ORIGEN2 code for performing a sensitivity analysis of a high-level waste disposal problem. The GRESS procedure uses computer calculus and the GRESS precompiler to automate the generation and calculation of gradients in a computer code. The GRESS version of ORIGEN2 is used to calculate the nuclide-dependent sensitivities of the decay heat and radioactivity of 1008 nuclides comprising reprocessed high-level waste to changes in data and input parameters. The sensitivities are calculated in a single execution of the revised code as compared to the conventional method of rerunning the code numerous times. The availability of sensitivity data as an option in ORIGEN2 reveals relationships not easily recognized even with reruns

Large Variability in the Diversity of Physiologically Complex Surgical Procedures Exists Nationwide Among All Hospitals Including Among Large Teaching Hospitals.

Science.gov (United States)

Dexter, Franklin; Epstein, Richard H; Thenuwara, Kokila; Lubarsky, David A

2017-11-22

Multiple previous studies have shown that having a large diversity of procedures has a substantial impact on quality management of hospital surgical suites. At hospitals with substantial diversity, unless sophisticated statistical methods suitable for rare events are used, anesthesiologists working in surgical suites will have inaccurate predictions of surgical blood usage, case durations, cost accounting and price transparency, times remaining in late running cases, and use of intraoperative equipment. What is unknown is whether large diversity is a feature of only a few very unique set of hospitals nationwide (eg, the largest hospitals in each state or province). The 2013 United States Nationwide Readmissions Database was used to study heterogeneity among 1981 hospitals in their diversities of physiologically complex surgical procedures (ie, the procedure codes). The diversity of surgical procedures performed at each hospital was quantified using a summary measure, the number of different physiologically complex surgical procedures commonly performed at the hospital (ie, 1/Herfindahl). A total of 53.9% of all hospitals commonly performed 3-fold larger diversity (ie, >30 commonly performed physiologically complex procedures). Larger hospitals had greater diversity than the small- and medium-sized hospitals (P 30 procedures (lower 99% CL, 71.9% of hospitals). However, there was considerable variability among the large teaching hospitals in their diversity (interquartile range of the numbers of commonly performed physiologically complex procedures = 19.3; lower 99% CL, 12.8 procedures). The diversity of procedures represents a substantive differentiator among hospitals. Thus, the usefulness of statistical methods for operating room management should be expected to be heterogeneous among hospitals. Our results also show that "large teaching hospital" alone is an insufficient description for accurate prediction of the extent to which a hospital sustains the

Code of practice for ionizing radiation

International Nuclear Information System (INIS)

Khoo Boo Huat

1995-01-01

Prior to 1984, the use of ionizing radiation in Malaysia was governed by the Radioactive Substances Act of 1968. After 1984, its use came under the control of Act 304, called the Atomic Energy Licensing Act 1984. Under powers vested by the Act, the Radiation Protection (Basic Safety Standards) Regulations 1988 were formulated to regulate its use. These Acts do not provide information on proper working procedures. With the publication of the codes of Practice by The Standards and Industrial Research Institute of Malaysia (SIRIM), the users are now able to follow proper guidelines and use ionizing radiation safely and beneficially. This paper discusses the relevant sections in the following codes: 1. Code of Practice for Radiation Protection (Medical X-ray Diagnosis) MS 838:1983. 2. Code of Practice for Safety in Laboratories Part 4: Ionizing radiation MS 1042: Part 4: 1992. (author)

FRESCO: fusion reactor simulation code for tokamaks

International Nuclear Information System (INIS)

Mantsinen, M.J.

1995-03-01

The study of the dynamics of tokamak fusion reactors, a zero-dimensional particle and power balance code FRESCO (Fusion Reactor Simulation Code) has been developed at the Department of Technical Physics of Helsinki University of Technology. The FRESCO code is based on zero-dimensional particle and power balance equations averaged over prescribed plasma profiles. In the report the data structure of the FRESCO code is described, including the description of the COMMON statements, program input, and program output. The general structure of the code is described, including the description of subprograms and functions. The physical model used and examples of the code performance are also included in the report. (121 tabs.) (author)

The Coding Process and Its Challenges

Directory of Open Access Journals (Sweden)

Judith A. Holton, Ph.D.

2010-02-01

Full Text Available Coding is the core process in classic grounded theory methodology. It is through coding that the conceptual abstraction of data and its reintegration as theory takes place. There are two types of coding in a classic grounded theory study: substantive coding, which includes both open and selective coding procedures, and theoretical coding. In substantive coding, the researcher works with the data directly, fracturing and analysing it, initially through open coding for the emergence of a core category and related concepts and then subsequently through theoretical sampling and selective coding of data to theoretically saturate the core and related concepts. Theoretical saturation is achieved through constant comparison of incidents (indicators in the data to elicit the properties and dimensions of each category (code. This constant comparing of incidents continues until the process yields the interchangeability of indicators, meaning that no new properties or dimensions are emerging from continued coding and comparison. At this point, the concepts have achieved theoretical saturation and the theorist shifts attention to exploring the emergent fit of potential theoretical codes that enable the conceptual integration of the core and related concepts to produce hypotheses that account for relationships between the concepts thereby explaining the latent pattern of social behaviour that forms the basis of the emergent theory. The coding of data in grounded theory occurs in conjunction with analysis through a process of conceptual memoing, capturing the theorist’s ideation of the emerging theory. Memoing occurs initially at the substantive coding level and proceeds to higher levels of conceptual abstraction as coding proceeds to theoretical saturation and the theorist begins to explore conceptual reintegration through theoretical coding.

48 CFR 1503.500-71 - Procedures.

Science.gov (United States)

2010-10-01

... for: (1) A written code of business ethics and conduct and an ethics training program for all employees; (2) Periodic reviews of company business practices, procedures, policies and internal controls...

Optical encryption and QR codes: secure and noise-free information retrieval.

Science.gov (United States)

Barrera, John Fredy; Mira, Alejandro; Torroba, Roberto

2013-03-11

We introduce for the first time the concept of an information "container" before a standard optical encrypting procedure. The "container" selected is a QR code which offers the main advantage of being tolerant to pollutant speckle noise. Besides, the QR code can be read by smartphones, a massively used device. Additionally, QR code includes another secure step to the encrypting benefits the optical methods provide. The QR is generated by means of worldwide free available software. The concept development probes that speckle noise polluting the outcomes of normal optical encrypting procedures can be avoided, then making more attractive the adoption of these techniques. Actual smartphone collected results are shown to validate our proposal.

Numerical model for two-dimensional hydrodynamics and energy transport. [VECTRA code

Energy Technology Data Exchange (ETDEWEB)

Trent, D.S.

1973-06-01

The theoretical basis and computational procedure of the VECTRA computer program are presented. VECTRA (Vorticity-Energy Code for TRansport Analysis) is designed for applying numerical simulation to a broad range of intake/discharge flows in conjunction with power plant hydrological evaluation. The code computational procedure is based on finite-difference approximation of the vorticity-stream function partial differential equations which govern steady flow momentum transport of two-dimensional, incompressible, viscous fluids in conjunction with the transport of heat and other constituents.

Qualifying codes under software quality assurance: Two examples as guidelines for codes that are existing or under development

Energy Technology Data Exchange (ETDEWEB)

Mangold, D.

1993-05-01

Software quality assurance is an area of concem for DOE, EPA, and other agencies due to the poor quality of software and its documentation they have received in the past. This report briefly summarizes the software development concepts and terminology increasingly employed by these agencies and provides a workable approach to scientific programming under the new requirements. Following this is a practical description of how to qualify a simulation code, based on a software QA plan that has been reviewed and officially accepted by DOE/OCRWM. Two codes have recently been baselined and qualified, so that they can be officially used for QA Level 1 work under the DOE/OCRWM QA requirements. One of them was baselined and qualified within one week. The first of the codes was the multi-phase multi-component flow code TOUGH version 1, an already existing code, and the other was a geochemistry transport code STATEQ that was under development The way to accomplish qualification for both types of codes is summarized in an easy-to-follow step-by step fashion to illustrate how to baseline and qualify such codes through a relatively painless procedure.

Qualifying codes under software quality assurance: Two examples as guidelines for codes that are existing or under development

International Nuclear Information System (INIS)

Mangold, D.

1993-05-01

Software quality assurance is an area of concern for DOE, EPA, and other agencies due to the poor quality of software and its documentation they have received in the past. This report briefly summarizes the software development concepts and terminology increasingly employed by these agencies and provides a workable approach to scientific programming under the new requirements. Following this is a practical description of how to qualify a simulation code, based on a software QA plan that has been reviewed and officially accepted by DOE/OCRWM. Two codes have recently been baselined and qualified, so that they can be officially used for QA Level 1 work under the DOE/OCRWM QA requirements. One of them was baselined and qualified within one week. The first of the codes was the multi-phase multi-component flow code TOUGH version 1, an already existing code, and the other was a geochemistry transport code STATEQ that was under development The way to accomplish qualification for both types of codes is summarized in an easy-to-follow step-by step fashion to illustrate how to baseline and qualify such codes through a relatively painless procedure

Discussions on the experimental data covering (EDC) procedure

International Nuclear Information System (INIS)

Lee, S.Y.; Ban, C.H.

2004-01-01

In describing step-9 of TRAC-CSAU, there is a statement that there is no clear guide with which one can determine the code uncertainty parameters and their statistics using the integral and/or separate effects tests. On the other hand, there is an important requirement, stating that the code uncertainty should be evaluated through direct data comparison with the relevant integral systems and separate-effects experiments at different scales. There are some efforts, in the best-estimate LOCA methodologies, to use the IET and SET data for determining the code uncertainty parameters and their statistics. But it is hard to find a systematic way to relate the code uncertainty parameters and/or their statistics with the results of the direct data comparison, especially in the case of the components with multiple code uncertainty parameters. It is essential to develop a procedure to implement the requirement of the direct data comparison with SETs and IETs in determining the code uncertainty. In this paper, Code Accuracy Based Uncertainty Estimation (CABUE) technique is introduced with an emphasis on the role of Experimental Data Coverings to connect the code accuracy with the overall uncertainty for a code prediction. Contrasting to the fact that the code accuracy is used only for confirmation of the conservatism in TRACCSAU, in CABUE, it can be represented by the scalable code parameters and their statistics through the EDC extensive calculations, it gives several benefits. Since the code accuracy becomes the measure of the determination of the statistics of code parameters, a code with better accuracy naturally provide smaller overall calculational uncertainty. This is the full implementation of the requirement of 'direct data comparison'. Adopting EDC procedure in CABUE where uniform application of distribution-free percentile estimation technique with simple random sampling calculations is used in various levels, makes it easy to chose the number of code uncertainty

Development and Application of a Code for Internal Exposure (CINEX) based on the CINDY code

International Nuclear Information System (INIS)

Kravchik, T.; Duchan, N.; Sarah, R.; Gabay, Y.; Kol, R.

2004-01-01

Internal exposure to radioactive materials at the NRCN is evaluated using the CINDY (Code for Internal Dosimetry) Package. The code was developed by the Pacific Northwest Laboratory to assist the interpretation of bioassay data, provide bioassay projections and evaluate committed and calendar-year doses from intake or bioassay measurement data. It provides capabilities to calculate organ dose and effective dose equivalents using the International Commission on Radiological Protection (ICRP) 30 approach. The CINDY code operates under DOS operating system and consequently its operation needs a relatively long procedure which also includes a lot of manual typing that can lead to personal human mistakes. A new code has been developed at the NRCN, the CINEX (Code for Internal Exposure), which is an Excel application and leads to a significant reduction in calculation time (in the order of 5-10 times) and in the risk of personal human mistakes. The code uses a database containing tables which were constructed by the CINDY and contain the bioassay values predicted by the ICRP30 model after an intake of an activity unit of each isotope. Using the database, the code than calculates the appropriate intake and consequently the committed effective dose and organ dose. Calculations with the CINEX code were compared to similar calculations with the CINDY code. The discrepancies were less than 5%, which is the rounding error of the CINDY code. Attached is a table which compares parameters calculated with the CINEX and the CINDY codes (for a class Y uranium). The CINEX is now used at the NRCN to calculate occupational intakes and doses to workers with radioactive materials

Input data required for specific performance assessment codes

International Nuclear Information System (INIS)

Seitz, R.R.; Garcia, R.S.; Starmer, R.J.; Dicke, C.A.; Leonard, P.R.; Maheras, S.J.; Rood, A.S.; Smith, R.W.

1992-02-01

The Department of Energy's National Low-Level Waste Management Program at the Idaho National Engineering Laboratory generated this report on input data requirements for computer codes to assist States and compacts in their performance assessments. This report gives generators, developers, operators, and users some guidelines on what input data is required to satisfy 22 common performance assessment codes. Each of the codes is summarized and a matrix table is provided to allow comparison of the various input required by the codes. This report does not determine or recommend which codes are preferable

Procedures for treating common cause failures in safety and reliability studies: Volume 2, Analytic background and techniques: Final report

International Nuclear Information System (INIS)

Mosleh, A.; Fleming, K.N.; Parry, G.W.; Paula, H.M.; Worledge, D.H.; Rasmuson, D.M.

1988-12-01

This report presents a framework for the inclusion of the impact of common cause failures in risk and reliability evaluations. Common cause failures are defined as that subset of dependent failures for which causes are not explicitly included in the logic model as basic events. The emphasis here is on providing procedures for a practical, systematic approach that can be used to perform and clearly document the analysis. The framework and the methods discussed for performing the different stages of the analysis integrate insights obtained from engineering assessments of the system and the historical evidence from multiple failure events into a systematic, reproducible, and defensible analysis. This document, Volume 2, contains a series of appendices that provide additional background and methodological detail on several important topics discussed in Volume 1

Performance Evaluation of HARQ Technique with UMTS Turbo Code

Directory of Open Access Journals (Sweden)

S. S. Brkić

2011-11-01

Full Text Available The hybrid automatic repeat request technique (HARQ represents the error control principle which combines an error correcting code and automatic repeat request procedure (ARQ, within the same transmission system. In this paper, using Monte Carlo simulation process, the characteristics of HARQ technique are determined, for the case of the Universal Mobile Telecommunication System (UMTS turbo code.

Content Layer progressive Coding of Digital Maps

DEFF Research Database (Denmark)

Forchhammer, Søren; Jensen, Ole Riis

2002-01-01

A new lossless context based method is presented for content progressive coding of limited bits/pixel images, such as maps, company logos, etc., common on the World Wide Web. Progressive encoding is achieved by encoding the image in content layers based on color level or other predefined...... information. Information from already coded layers are used when coding subsequent layers. This approach is combined with efficient template based context bilevel coding, context collapsing methods for multilevel images and arithmetic coding. Relative pixel patterns are used to collapse contexts. Expressions...... for calculating the resulting number of contexts are given. The new methods outperform existing schemes coding digital maps and in addition provide progressive coding. Compared to the state-of-the-art PWC coder, the compressed size is reduced to 50-70% on our layered map test images....

Computer Security: is your code sane?

CERN Multimedia

Stefan Lueders, Computer Security Team

2015-01-01

How many of us write code? Software? Programs? Scripts? How many of us are properly trained in this and how well do we do it? Do we write functional, clean and correct code, without flaws, bugs and vulnerabilities*? In other words: are our codes sane?   Figuring out weaknesses is not that easy (see our quiz in an earlier Bulletin article). Therefore, in order to improve the sanity of your code, prevent common pit-falls, and avoid the bugs and vulnerabilities that can crash your code, or – worse – that can be misused and exploited by attackers, the CERN Computer Security team has reviewed its recommendations for checking the security compliance of your code. “Static Code Analysers” are stand-alone programs that can be run on top of your software stack, regardless of whether it uses Java, C/C++, Perl, PHP, Python, etc. These analysers identify weaknesses and inconsistencies including: employing undeclared variables; expressions resu...

COLLABORATIVE PROCEDURE TO ACHIEVE AN EFFECTIVE JURISDICTIONAL TUTELAGE

Directory of Open Access Journals (Sweden)

Darilê Marques da Matta

2015-12-01

Full Text Available Set in a constitutional context, the procedure should be an effective instrument for the guarantee and realization of rights. Attentive to the needs imposed by the state of Law, the new Civil Procedure Code, approved this year, 2 015, seeks to settle several constitutional guarantees, for the purpose of making the procedure more effective. From the inclusion of collaborative institutes, the new Civil Procedure C ode introduces the concept of self-composition and cooperation of procedural agents to achieve, timely, effective jurisdictional tutelage.

ASPECTS OF GUILTY PLEA AND PROCEDURE OF GUILT ADMITTANCE, NEW JUDICIAL INSITUTIONS FOR A CRIMINAL TRIAL OF HIGHER QUALITY

Directory of Open Access Journals (Sweden)

Rodica Aida POPA

2017-05-01

Full Text Available During the broad reform process that has taken place in recent years for the criminal proceeding activity, following the entry into force of the new Criminal Procedure Act on February 1st 2014, there have been changes of some legal institutions from the old Criminal Code, such as the procedure of admitting the deeds the defendant is held responsible for (art 320 from former Code of Criminal procedure by its provisions in the content of art 374, alignment 4, as it has been modified by Government Emergency Ordinance and introducing new ones, such as the guilty plea (art 478-488 under the circumstances of modifying GEO nr 18/2016 a special procedure meant to insure the judging of causes with celerity. Both procedures have a common component given by the guilt plea from the defendant, having an additional condition in the case of the guilty plea, besides the aforementioned one, which is the one of accepting the legal classification of the offence for which the criminal proceedings were commenced. The two legal institutions ensure the compliance with the procedural guarantees of the right to a legal counsel of the defendant, sanctioning this one, taking place with a reduction of the sentence, under conditions stipulated by law. Furthermore, by admitting the guilt and the legal classification of the offence by the defendant found guilty, in the two procedures also takes place a confirmation of the legality and compliance of the evidence submitted in the course of criminal proceedings.

New procedures to evaluate visually lossless compression for display systems

Science.gov (United States)

Stolitzka, Dale F.; Schelkens, Peter; Bruylants, Tim

2017-09-01

Visually lossless image coding in isochronous display streaming or plesiochronous networks reduces link complexity and power consumption and increases available link bandwidth. A new set of codecs developed within the last four years promise a new level of coding quality, but require new techniques that are sufficiently sensitive to the small artifacts or color variations induced by this new breed of codecs. This paper begins with a summary of the new ISO/IEC 29170-2, a procedure for evaluation of lossless coding and reports the new work by JPEG to extend the procedure in two important ways, for HDR content and for evaluating the differences between still images, panning images and image sequences. ISO/IEC 29170-2 relies on processing test images through a well-defined process chain for subjective, forced-choice psychophysical experiments. The procedure sets an acceptable quality level equal to one just noticeable difference. Traditional image and video coding evaluation techniques, such as, those used for television evaluation have not proven sufficiently sensitive to the small artifacts that may be induced by this breed of codecs. In 2015, JPEG received new requirements to expand evaluation of visually lossless coding for high dynamic range images, slowly moving images, i.e., panning, and image sequences. These requirements are the basis for new amendments of the ISO/IEC 29170-2 procedures described in this paper. These amendments promise to be highly useful for the new content in television and cinema mezzanine networks. The amendments passed the final ballot in April 2017 and are on track to be published in 2018.

Toward a CFD nose-to-tail capability - Hypersonic unsteady Navier-Stokes code validation

Science.gov (United States)

Edwards, Thomas A.; Flores, Jolen

1989-01-01

Computational fluid dynamics (CFD) research for hypersonic flows presents new problems in code validation because of the added complexity of the physical models. This paper surveys code validation procedures applicable to hypersonic flow models that include real gas effects. The current status of hypersonic CFD flow analysis is assessed with the Compressible Navier-Stokes (CNS) code as a case study. The methods of code validation discussed to beyond comparison with experimental data to include comparisons with other codes and formulations, component analyses, and estimation of numerical errors. Current results indicate that predicting hypersonic flows of perfect gases and equilibrium air are well in hand. Pressure, shock location, and integrated quantities are relatively easy to predict accurately, while surface quantities such as heat transfer are more sensitive to the solution procedure. Modeling transition to turbulence needs refinement, though preliminary results are promising.

Halftone Coding with JBIG2

DEFF Research Database (Denmark)

Martins, Bo; Forchhammer, Søren

2000-01-01

of a halftone pattern dictionary.The decoder first decodes the gray-scale image. Then for each gray-scale pixel looks up the corresponding halftonepattern in the dictionary and places it in the reconstruction bitmap at the position corresponding to the gray-scale pixel. The coding method is inherently lossy......The emerging international standard for compression of bilevel images and bi-level documents, JBIG2,provides a mode dedicated for lossy coding of halftones. The encoding procedure involves descreening of the bi-levelimage into gray-scale, encoding of the gray-scale image, and construction...... and care must be taken to avoid introducing artifacts in the reconstructed image. We describe how to apply this coding method for halftones created by periodic ordered dithering, by clustered dot screening (offset printing), and by techniques which in effect dithers with blue noise, e.g., error diffusion...

AD codes of practice 'pressure vessels'

International Nuclear Information System (INIS)

Schefe, G.

1978-01-01

Within the AD-Regelwerk, a manual of regulations, the AD codes of practice HP1 and HP20 have been published for the first time. In contrast to the already existing codes of practice of the series HP, these leaflets do not mainly contain changes in the test details and the course of the procedure, but, in a summarized form, that which has been practiced for years. Comments on the new codes concentrate mainly on those things, which are really new, or which might appear to be new. Furthermore, control lists and proposals for printed forms, addressed to designers and supervisors on the side of the manufacturers, are to contribute to the tests being carried out economically. (orig./RW) [de

Four Year-Olds Use Norm-Based Coding for Face Identity

Science.gov (United States)

Jeffery, Linda; Read, Ainsley; Rhodes, Gillian

2013-01-01

Norm-based coding, in which faces are coded as deviations from an average face, is an efficient way of coding visual patterns that share a common structure and must be distinguished by subtle variations that define individuals. Adults and school-aged children use norm-based coding for face identity but it is not yet known if pre-school aged…

Reconciliation of international administrative coding systems for comparison of colorectal surgery outcome.

Science.gov (United States)

Munasinghe, A; Chang, D; Mamidanna, R; Middleton, S; Joy, M; Penninckx, F; Darzi, A; Livingston, E; Faiz, O

2014-07-01

Significant variation in colorectal surgery outcomes exists between different countries. Better understanding of the sources of variable outcomes using administrative data requires alignment of differing clinical coding systems. We aimed to map similar diagnoses and procedures across administrative coding systems used in different countries. Administrative data were collected in a central database as part of the Global Comparators (GC) Project. In order to unify these data, a systematic translation of diagnostic and procedural codes was undertaken. Codes for colorectal diagnoses, resections, operative complications and reoperative interventions were mapped across the respective national healthcare administrative coding systems. Discharge data from January 2006 to June 2011 for patients who had undergone colorectal surgical resections were analysed to generate risk-adjusted models for mortality, length of stay, readmissions and reoperations. In all, 52 544 case records were collated from 31 institutions in five countries. Mapping of all the coding systems was achieved so that diagnosis and procedures from the participant countries could be compared. Using the aligned coding systems to develop risk-adjusted models, the 30-day mortality rate for colorectal surgery was 3.95% (95% CI 0.86-7.54), the 30-day readmission rate was 11.05% (5.67-17.61), the 28-day reoperation rate was 6.13% (3.68-9.66) and the mean length of stay was 14 (7.65-46.76) days. The linkage of international hospital administrative data that we developed enabled comparison of documented surgical outcomes between countries. This methodology may facilitate international benchmarking. Colorectal Disease © 2014 The Association of Coloproctology of Great Britain and Ireland.

Coding as literacy metalithikum IV

CERN Document Server

Bühlmann, Vera; Moosavi, Vahid

2015-01-01

Recent developments in computer science, particularly "data-driven procedures" have opened a new level of design and engineering. This has also affected architecture. The publication collects contributions on Coding as Literacy by computer scientists, mathematicians, philosophers, cultural theorists, and architects. "Self-Organizing Maps" (SOM) will serve as the concrete reference point for all further discussions.

RECEPTING THE PRINCIPLE OF SUPREMACY OF CONSTITUTION ON THE NEW PENAL CODE

Directory of Open Access Journals (Sweden)

Marius ANDREESCU

2016-07-01

Full Text Available The supremacy of Constitution has as main consequence the compliance of entire law with the constitutional norms. Guaranteeing of the observance of this principle is essential for the rule of law, is primarily an attribute of the Constitutional Court, but also an obligation of the legislator to receive by texts adopted, within its content and form, the constitutional norms. Entering into force of the new criminal codes generated a significant jurisprudence of the Constitutional Court on the verification of constitutionality of some regulations in the Criminal Code and Criminal Procedure Code. Through this study we intend to analyze the following key issues: a how were the constitutional principles and values embodied in some criminal and criminal procedural norms of the new codes; b the effects of Constitutional Court decisions in the process of constitutionalizing of the criminal law; c applying into judicial activities of the Constitutional Court decisions, particularly those through which the new Criminal Code regulations were found unconstitutional.

Technical basis for the extension of ASME Code Case N-494 for assessment of austenitic piping

International Nuclear Information System (INIS)

Bloom, J.M.

1995-01-01

In 1990, the ASME Boiler and Pressure Vessel Code for Nuclear Components approved Code Case N-494 as an alternative procedure for evaluating laws in Light Water Reactor alterative procedure for evaluating flaws in Light Water Reactor (LWR) ferritic piping. The approach is an alternative to Appendix H of the ASME Code and alloys the user to remove some unnecessary conservatism in the existing procedure by allowing the use of pipe specific material properties. The Code Case is an implementation of the methodology of the Deformation Plasticity Failure Assessment diagram (DPFAD). The key ingredient in the application of DPFAD is that the material stress-strain curve must be in the format of a simple power law hardening stress-strain curve such as the Ramberg-Osgood (R-O) model. Ferritic materials can be accurately fit by the R-O model and, therefore, it was natural to use the DPFAD methodology for the assessment of LWR ferritic piping. An extension of Code Case N-494 to austenitic piping required a modification of the existing DPFAD methodology. The Code Case N-494 approach was revised using the PWFAD procedure in the same manner as in the development of the original N-494 approach for ferritic materials. A lower bound stress-strain curve was used to generate a PWFAD curve for the geometry of a part-through wall circumferential flaw in a cylinder under tension. Earlier work demonstrated that a cylinder under axial tension with a 50% flaw depth, 90 degrees in circumference, and radius to thickness of 10, produced a lower bound FAD curve. Validation of the new proposed Code Case procedure for austenitic piping was performed using actual pipe test data. Using the lower bound PWFAD curve, pipe test results were conservatively predicted. The resultant development of ht PWFAD curve for austenitic piping led to a revision of Code Case N-494 to include a procedure for assessment of flaws in austenitic piping

Validation of an advanced analytical procedure applied to the measurement of environmental radioactivity.

Science.gov (United States)

Thanh, Tran Thien; Vuong, Le Quang; Ho, Phan Long; Chuong, Huynh Dinh; Nguyen, Vo Hoang; Tao, Chau Van

2018-04-01

In this work, an advanced analytical procedure was applied to calculate radioactivity in spiked water samples in a close geometry gamma spectroscopy. It included MCNP-CP code in order to calculate the coincidence summing correction factor (CSF). The CSF results were validated by a deterministic method using ETNA code for both p-type HPGe detectors. It showed that a good agreement for both codes. Finally, the validity of the developed procedure was confirmed by a proficiency test to calculate the activities of various radionuclides. The results of the radioactivity measurement with both detectors using the advanced analytical procedure were received the ''Accepted'' statuses following the proficiency test. Copyright © 2018 Elsevier Ltd. All rights reserved.

Sequencing the GRHL3 Coding Region Reveals Rare Truncating Mutations and a Common Susceptibility Variant for Nonsyndromic Cleft Palate

Science.gov (United States)

Mangold, Elisabeth; Böhmer, Anne C.; Ishorst, Nina; Hoebel, Ann-Kathrin; Gültepe, Pinar; Schuenke, Hannah; Klamt, Johanna; Hofmann, Andrea; Gölz, Lina; Raff, Ruth; Tessmann, Peter; Nowak, Stefanie; Reutter, Heiko; Hemprich, Alexander; Kreusch, Thomas; Kramer, Franz-Josef; Braumann, Bert; Reich, Rudolf; Schmidt, Gül; Jäger, Andreas; Reiter, Rudolf; Brosch, Sibylle; Stavusis, Janis; Ishida, Miho; Seselgyte, Rimante; Moore, Gudrun E.; Nöthen, Markus M.; Borck, Guntram; Aldhorae, Khalid A.; Lace, Baiba; Stanier, Philip; Knapp, Michael; Ludwig, Kerstin U.

2016-01-01

Nonsyndromic cleft lip with/without cleft palate (nsCL/P) and nonsyndromic cleft palate only (nsCPO) are the most frequent subphenotypes of orofacial clefts. A common syndromic form of orofacial clefting is Van der Woude syndrome (VWS) where individuals have CL/P or CPO, often but not always associated with lower lip pits. Recently, ∼5% of VWS-affected individuals were identified with mutations in the grainy head-like 3 gene (GRHL3). To investigate GRHL3 in nonsyndromic clefting, we sequenced its coding region in 576 Europeans with nsCL/P and 96 with nsCPO. Most strikingly, nsCPO-affected individuals had a higher minor allele frequency for rs41268753 (0.099) than control subjects (0.049; p = 1.24 × 10−2). This association was replicated in nsCPO/control cohorts from Latvia, Yemen, and the UK (pcombined = 2.63 × 10−5; ORallelic = 2.46 [95% CI 1.6–3.7]) and reached genome-wide significance in combination with imputed data from a GWAS in nsCPO triads (p = 2.73 × 10−9). Notably, rs41268753 is not associated with nsCL/P (p = 0.45). rs41268753 encodes the highly conserved p.Thr454Met (c.1361C>T) (GERP = 5.3), which prediction programs denote as deleterious, has a CADD score of 29.6, and increases protein binding capacity in silico. Sequencing also revealed four novel truncating GRHL3 mutations including two that were de novo in four families, where all nine individuals harboring mutations had nsCPO. This is important for genetic counseling: given that VWS is rare compared to nsCPO, our data suggest that dominant GRHL3 mutations are more likely to cause nonsyndromic than syndromic CPO. Thus, with rare dominant mutations and a common risk variant in the coding region, we have identified an important contribution for GRHL3 in nsCPO. PMID:27018475

Quality Assurance Procedures for ModCat Database Code Files

Energy Technology Data Exchange (ETDEWEB)

Siciliano, Edward R.; Devanathan, Ram; Guillen, Zoe C.; Kouzes, Richard T.; Schweppe, John E.

2014-04-01

The Quality Assurance procedures used for the initial phase of the Model Catalog Project were developed to attain two objectives, referred to as “basic functionality” and “visualization.” To ensure the Monte Carlo N-Particle model input files posted into the ModCat database meet those goals, all models considered as candidates for the database are tested, revised, and re-tested.

Workshop on transport for a common ion driver

International Nuclear Information System (INIS)

Olson, C.C.; Lee, E.; Langdon, B.

1994-01-01

This report contains research in the following areas related to beam transport for a common ion driver: multi-gap acceleration; neutralization with electrons; gas neutralization; self-pinched transport; HIF and LIF transport, and relevance to common ion driver; LIF and HIF reactor concepts and relevance to common ion driver; atomic physics for common ion driver; code capabilities and needed improvement

Neural network decoder for quantum error correcting codes

Science.gov (United States)

Krastanov, Stefan; Jiang, Liang

Artificial neural networks form a family of extremely powerful - albeit still poorly understood - tools used in anything from image and sound recognition through text generation to, in our case, decoding. We present a straightforward Recurrent Neural Network architecture capable of deducing the correcting procedure for a quantum error-correcting code from a set of repeated stabilizer measurements. We discuss the fault-tolerance of our scheme and the cost of training the neural network for a system of a realistic size. Such decoders are especially interesting when applied to codes, like the quantum LDPC codes, that lack known efficient decoding schemes.

Smiling faces and cash bonuses: Exploring common affective coding across positive and negative emotional and motivational stimuli using fMRI.

Science.gov (United States)

Park, Haeme R P; Kostandyan, Mariam; Boehler, C Nico; Krebs, Ruth M

2018-06-01

Although it is clear that emotional and motivational manipulations yield a strong influence on cognition and behaviour, these domains have mostly been investigated in independent research lines. Therefore, it remains poorly understood how far these affective manipulations overlap in terms of their underlying neural activations, especially in light of previous findings that suggest a shared valence mechanism across multiple affective processing domains (e.g., monetary incentives, primary rewards, emotional events). This is particularly interesting considering the commonality between emotional and motivational constructs in terms of their basic affective nature (positive vs. negative), but dissociations in terms of instrumentality, in that only reward-related stimuli are typically associated with performance-contingent outcomes. Here, we aimed to examine potential common neural processes triggered by emotional and motivational stimuli in matched tasks within participants using functional magnetic resonance imaging (fMRI). Across tasks, we found shared valence effects in the ventromedial prefrontal cortex and left inferior frontal gyrus (part of dorsolateral prefrontal cortex), with increased activity for positive and negative stimuli, respectively. Despite this commonality, emotion and reward tasks featured differential behavioural patterns in that negative valence effects (performance costs) were exclusive to emotional stimuli, while positive valence effects (performance benefits) were only observed for reward-related stimuli. Overall, our data suggest a common affective coding mechanism across different task domains and support the idea that monetary incentives entail signed basic valence signals, above and beyond the instruction to perform both gain and loss trials as accurately as possible to maximise the outcome.

French RSE-M and RCC-MR code appendices for flaw analysis: Presentation of the fracture parameters calculation-Part I: General overview

International Nuclear Information System (INIS)

Marie, S.; Chapuliot, S.; Kayser, Y.; Lacire, M.H.; Drubay, B.; Barthelet, B.; Le Delliou, P.; Rougier, V.; Naudin, C.; Gilles, P.; Triay, M.

2007-01-01

Two French nuclear codes include flaw assessment procedures: the RSE-M code 'Rules for In-service Inspection of Nuclear Power Plant Components' and the RCC-MR code 'Design and Construction rules for mechanical components of FBR nuclear islands and high temperature applications'. An important effort of development of these analytical methods has been made for the last 10 years in the frame of a collaboration between CEA, EDF and AREVA-NP, and in the frame of R and D actions involving CEA and IRSN. These activities have led to a unification of the common methods of the two codes. The calculation of fracture mechanics parameters, and in particular the stress intensity factor K I and the J integral, has been widely developed for industrial configurations. All developments have been integrated in the 2005 edition of RSE-M and in the 2007 edition of RCC-MR. This series of articles is composed of five parts: this first one presents an overview of the methods proposed in the RCC-MR and RSE-M codes. Parts II-IV provide compendia for specific components: plates (part II), pipes (part III) and elbows (part IV). Finally, part V presents the validation elements of the methods, with details on the process followed for their development and on evaluation of the accuracy of the proposed analytical methods. This first article of the series presents an overview of the calculation of K I and J in these two codes and describes briefly the defect assessment analyses. Specific details in the Appendix A16 of RCC-MR (LBB procedure and creep analyses) are also introduced in this article

Efficiency of performing pulmonary procedures in a shared endoscopy unit: procedure time, turnaround time, delays, and procedure waiting time.

Science.gov (United States)

Verma, Akash; Lee, Mui Yok; Wang, Chunhong; Hussein, Nurmalah B M; Selvi, Kalai; Tee, Augustine

2014-04-01

The purpose of this study was to assess the efficiency of performing pulmonary procedures in the endoscopy unit in a large teaching hospital. A prospective study from May 20 to July 19, 2013, was designed. The main outcome measures were procedure delays and their reasons, duration of procedural steps starting from patient's arrival to endoscopy unit, turnaround time, total case durations, and procedure wait time. A total of 65 procedures were observed. The most common procedure was BAL (61%) followed by TBLB (31%). Overall procedures for 35 (53.8%) of 65 patients were delayed by ≥ 30 minutes, 21/35 (60%) because of "spillover" of the gastrointestinal and surgical cases into the time block of pulmonary procedure. Time elapsed between end of pulmonary procedure and start of the next procedure was ≥ 30 minutes in 8/51 (16%) of cases. In 18/51 (35%) patients there was no next case in the room after completion of the pulmonary procedure. The average idle time of the room after the end of pulmonary procedure and start of next case or end of shift at 5:00 PM if no next case was 58 ± 53 minutes. In 17/51 (33%) patients the room's idle time was >60 minutes. A total of 52.3% of patients had the wait time >2 days and 11% had it ≥ 6 days, reason in 15/21 (71%) being unavailability of the slot. Most pulmonary procedures were delayed due to spillover of the gastrointestinal and surgical cases into the block time allocated to pulmonary procedures. The most common reason for difficulty encountered in scheduling the pulmonary procedure was slot unavailability. This caused increased procedure waiting time. The strategies to reduce procedure delays and turnaround times, along with improved scheduling methods, may have a favorable impact on the volume of procedures performed in the unit thereby optimizing the existing resources.

Greedy vs. L1 convex optimization in sparse coding

DEFF Research Database (Denmark)

Ren, Huamin; Pan, Hong; Olsen, Søren Ingvor

2015-01-01

Sparse representation has been applied successfully in many image analysis applications, including abnormal event detection, in which a baseline is to learn a dictionary from the training data and detect anomalies from its sparse codes. During this procedure, sparse codes which can be achieved...... solutions. Considering the property of abnormal event detection, i.e., only normal videos are used as training data due to practical reasons, effective codes in classification application may not perform well in abnormality detection. Therefore, we compare the sparse codes and comprehensively evaluate...... their performance from various aspects to better understand their applicability, including computation time, reconstruction error, sparsity, detection...

Code of practice for conducting radiation work at PINSTECH (revised 1992)

International Nuclear Information System (INIS)

Aslam, M.; Atta, M.A.; Orfi, S.D.

1992-02-01

The primary objective of this code is to achieve standard of radiation protection and safety set by Pakistan Nuclear Safety and Radiation Protection (PNSRP) ordinance 1984 and PNSRP regulations 1990. Secondary objective remains to make all best efforts to implement latest ICRP recommendations. The revised code of practice sets forth the objective of adequate system radiological safety of radiation workers, environment and general public. The code provides the guidance to persons and authorities who are responsible for the protection of workers and those who are concerned with the planning and management of personnel monitoring services. The procedures set forth in the code are mandatory and in no case should any of them be deviated under normal conditions. All those supervising and performing any kind of radiation work are required to study and adhere to those procedures and shell make all possible efforts to keep the exposure as low as reasonably achievable (ALARA), social and economic factor being taken into account. (author)

Optimal and efficient decoding of concatenated quantum block codes

International Nuclear Information System (INIS)

Poulin, David

2006-01-01

We consider the problem of optimally decoding a quantum error correction code--that is, to find the optimal recovery procedure given the outcomes of partial ''check'' measurements on the system. In general, this problem is NP hard. However, we demonstrate that for concatenated block codes, the optimal decoding can be efficiently computed using a message-passing algorithm. We compare the performance of the message-passing algorithm to that of the widespread blockwise hard decoding technique. Our Monte Carlo results using the five-qubit and Steane's code on a depolarizing channel demonstrate significant advantages of the message-passing algorithms in two respects: (i) Optimal decoding increases by as much as 94% the error threshold below which the error correction procedure can be used to reliably send information over a noisy channel; and (ii) for noise levels below these thresholds, the probability of error after optimal decoding is suppressed at a significantly higher rate, leading to a substantial reduction of the error correction overhead

Citham-2 computer code-User manual

International Nuclear Information System (INIS)

Batista, J.L.

1984-01-01

The procedures and the input data for the Citham-2 computer code are described. It is a subroutine that modifies the nuclide concentration taking in account its burn and prepares cross sections library in 2,3 or 4 energy groups, to the used for Citation program. (E.G.) [pt

Standardized Definitions for Code Verification Test Problems

Energy Technology Data Exchange (ETDEWEB)

Doebling, Scott William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-09-14

This document contains standardized definitions for several commonly used code verification test problems. These definitions are intended to contain sufficient information to set up the test problem in a computational physics code. These definitions are intended to be used in conjunction with exact solutions to these problems generated using Exact- Pack, www.github.com/lanl/exactpack.

A Concise and Comprehensive Description of Shoulder Pathology and Procedures: The 4D Code System

Directory of Open Access Journals (Sweden)

Laurent Lafosse

2012-01-01

Full Text Available Background. We introduce a novel description system of shoulder pathoanatomy. Its goal is to provide a comprehensive three-dimensional picture, with an additional component of time; thus, we call it the 4D code. Methods. Each line of the code starts with right versus left and a time designation. The pillar components are recorded regardless of pathology; they include subscapularis, long head of biceps tendon, supraspinatus, infraspinatus, and teres minor. Secondary elements can be added if there is observed pathology, including acromioclavicular joint, glenohumeral joint, labrum, tear configuration, location and extent of partial cuff tear, calcific tendonitis, fatty infiltration, and neuropathy. Results. We provide two illustrative examples of patients which show the ease and effectiveness of the 4D code. With a few simple lines, significant amount of information about patients’ pathology, surgery, and recovery can be easily conveyed. Discussion. We utilize existing validated classification systems for parts of the shoulder and provide a frame work to build a comprehensive picture. The alphanumeric code provides a simple language that is universally understood. The 4D code is concise yet complete. It seeks to improve efficiency and accuracy of the communication, documentation, and visualization of shoulder pathology within individual practices and between providers.

Improved decoding for a concatenated coding system

DEFF Research Database (Denmark)

Paaske, Erik

1990-01-01

The concatenated coding system recommended by CCSDS (Consultative Committee for Space Data Systems) uses an outer (255,233) Reed-Solomon (RS) code based on 8-b symbols, followed by the block interleaver and an inner rate 1/2 convolutional code with memory 6. Viterbi decoding is assumed. Two new...... decoding procedures based on repeated decoding trials and exchange of information between the two decoders and the deinterleaver are proposed. In the first one, where the improvement is 0.3-0.4 dB, only the RS decoder performs repeated trials. In the second one, where the improvement is 0.5-0.6 dB, both...... decoders perform repeated decoding trials and decoding information is exchanged between them...

The Spanish national health care-associated infection surveillance network (INCLIMECC): data summary January 1997 through December 2006 adapted to the new National Healthcare Safety Network Procedure-associated module codes.

Science.gov (United States)

Pérez, Cristina Díaz-Agero; Rodela, Ana Robustillo; Monge Jodrá, Vincente

2009-12-01

In 1997, a national standardized surveillance system (designated INCLIMECC [Indicadores Clínicos de Mejora Continua de la Calidad]) was established in Spain for health care-associated infection (HAI) in surgery patients, based on the National Nosocomial Infection Surveillance (NNIS) system. In 2005, in its procedure-associated module, the National Healthcare Safety Network (NHSN) inherited the NNIS program for surveillance of HAI in surgery patients and reorganized all surgical procedures. INCLIMECC actively monitors all patients referred to the surgical ward of each participating hospital. We present a summary of the data collected from January 1997 to December 2006 adapted to the new NHSN procedures. Surgical site infection (SSI) rates are provided by operative procedure and NNIS risk index category. Further quality indicators reported are surgical complications, length of stay, antimicrobial prophylaxis, mortality, readmission because of infection or other complication, and revision surgery. Because the ICD-9-CM surgery procedure code is included in each patient's record, we were able to reorganize our database avoiding the loss of extensive information, as has occurred with other systems.

Towards Automatic Learning of Heuristics for Mechanical Transformations of Procedural Code

Directory of Open Access Journals (Sweden)

Guillermo Vigueras

2017-01-01

Full Text Available The current trends in next-generation exascale systems go towards integrating a wide range of specialized (co-processors into traditional supercomputers. Due to the efficiency of heterogeneous systems in terms of Watts and FLOPS per surface unit, opening the access of heterogeneous platforms to a wider range of users is an important problem to be tackled. However, heterogeneous platforms limit the portability of the applications and increase development complexity due to the programming skills required. Program transformation can help make programming heterogeneous systems easier by defining a step-wise transformation process that translates a given initial code into a semantically equivalent final code, but adapted to a specific platform. Program transformation systems require the definition of efficient transformation strategies to tackle the combinatorial problem that emerges due to the large set of transformations applicable at each step of the process. In this paper we propose a machine learning-based approach to learn heuristics to define program transformation strategies. Our approach proposes a novel combination of reinforcement learning and classification methods to efficiently tackle the problems inherent to this type of systems. Preliminary results demonstrate the suitability of this approach.

Optimization of Particle-in-Cell Codes on RISC Processors

Science.gov (United States)

Decyk, Viktor K.; Karmesin, Steve Roy; Boer, Aeint de; Liewer, Paulette C.

1996-01-01

General strategies are developed to optimize particle-cell-codes written in Fortran for RISC processors which are commonly used on massively parallel computers. These strategies include data reorganization to improve cache utilization and code reorganization to improve efficiency of arithmetic pipelines.

Circular codes revisited: a statistical approach.

Science.gov (United States)

Gonzalez, D L; Giannerini, S; Rosa, R

2011-04-21

In 1996 Arquès and Michel [1996. A complementary circular code in the protein coding genes. J. Theor. Biol. 182, 45-58] discovered the existence of a common circular code in eukaryote and prokaryote genomes. Since then, circular code theory has provoked great interest and underwent a rapid development. In this paper we discuss some theoretical issues related to the synchronization properties of coding sequences and circular codes with particular emphasis on the problem of retrieval and maintenance of the reading frame. Motivated by the theoretical discussion, we adopt a rigorous statistical approach in order to try to answer different questions. First, we investigate the covering capability of the whole class of 216 self-complementary, C(3) maximal codes with respect to a large set of coding sequences. The results indicate that, on average, the code proposed by Arquès and Michel has the best covering capability but, still, there exists a great variability among sequences. Second, we focus on such code and explore the role played by the proportion of the bases by means of a hierarchy of permutation tests. The results show the existence of a sort of optimization mechanism such that coding sequences are tailored as to maximize or minimize the coverage of circular codes on specific reading frames. Such optimization clearly relates the function of circular codes with reading frame synchronization. Copyright © 2011 Elsevier Ltd. All rights reserved.

Surgeon-patient communication during awake procedures.

Science.gov (United States)

Smith, Claire S; Guyton, Kristina; Pariser, Joseph J; Siegler, Mark; Schindler, Nancy; Langerman, Alexander

2017-06-01

Surgeons are increasingly performing procedures on awake patients. Communication during such procedures is complex and underexplored in the literature. Surgeons were recruited from the faculty of 2 hospitals to participate in an interview regarding their approaches to communication during awake procedures. Three researchers used the constant comparative method to transcribe, code, and review interviews until saturation was reached. Twenty-three surgeons described the advantages and disadvantages of awake procedures, their communication with the awake patient, their interactions with staff and with trainees, the environment of awake procedures, and how communication in this context is taught and learned. Surgeons recognized communication during awake procedures as important and reported varied strategies for ensuring patient comfort in this context. However, they also acknowledged challenges with multiparty communication during awake procedures, especially in balancing commitments to teaching with their duty to comfort the patient. Copyright © 2016 Elsevier Inc. All rights reserved.

Design and Analysis of LT Codes with Decreasing Ripple Size

DEFF Research Database (Denmark)

Sørensen, Jesper Hemming; Popovski, Petar; Østergaard, Jan

2012-01-01

In this paper we propose a new design of LT codes, which decreases the amount of necessary overhead in comparison to existing designs. The design focuses on a parameter of the LT decoding process called the ripple size. This parameter was also a key element in the design proposed in the original...... work by Luby. Specifically, Luby argued that an LT code should provide a constant ripple size during decoding. In this work we show that the ripple size should decrease during decoding, in order to reduce the necessary overhead. Initially we motivate this claim by analytical results related...... to the redundancy within an LT code. We then propose a new design procedure, which can provide any desired achievable decreasing ripple size. The new design procedure is evaluated and compared to the current state of the art through simulations. This reveals a significant increase in performance with respect...

Speech coding

Energy Technology Data Exchange (ETDEWEB)

Ravishankar, C., Hughes Network Systems, Germantown, MD

1998-05-08

coding techniques are equally applicable to any voice signal whether or not it carries any intelligible information, as the term speech implies. Other terms that are commonly used are speech compression and voice compression since the fundamental idea behind speech coding is to reduce (compress) the transmission rate (or equivalently the bandwidth) And/or reduce storage requirements In this document the terms speech and voice shall be used interchangeably.

Aesthetic procedures in office practice.

Science.gov (United States)

Small, Rebecca

2009-12-01

Since the approval of botulinum toxin, dermal fillers, and lasers for cosmetic use, minimally invasive aesthetic procedures have rapidly become the treatments of choice for age-related facial changes. In the past 10 years, aesthetic procedures have increased nearly five-fold. Of the 10.2 million aesthetic treatments performed in 2008, 83 percent were minimally invasive procedures. Botulinum toxin and dermal filler injections, laser hair reduction, chemical peels, laser skin resurfacing, microdermabrasion, and intense pulsed light photorejuvenation were the most commonly performed procedures in 2008. These procedures are effective and associated with minimal discomfort, and they have a low incidence of adverse effects and short recovery times. High patient and physician satisfaction have contributed to their growing popularity and availability in the primary care setting. As patient demand for aesthetic treatments increases, family physicians should be familiar with common minimally invasive aesthetic procedures when advising patients or incorporating aesthetic care into office practice.

GAPCON-THERMAL-3 code description

International Nuclear Information System (INIS)

Lanning, D.D.; Mohr, C.L.; Panisko, F.E.; Stewart, K.B.

1978-01-01

GAPCON-3 is a computer program that predicts the thermal and mechanical behavior of an operating fuel rod during its normal lifetime. The code calculates temperatures, dimensions, stresses, and strains for the fuel and the cladding in both the radial and axial directions for each step of the user specified power history. The method of weighted residuals is for the steady state temperature calculation, and is combined with a finite difference approximation of the time derivative for transient conditions. The stress strain analysis employs an iterative axisymmetric finite element procedure that includes plasticity and creep for normal and pellet-clad mechanical interaction loads. GAPCON-3 can solve steady state and operational transient problems. Comparisons of GAPCON-3 predictions to both closed form analytical solutions and actual inpile instrumented fuel rod data have demonstrated the ability of the code to calculate fuel rod behavior. GAPCON-3 features a restart capability and an associated plot package unavailable in previous GAPCON series codes

GAPCON-THERMAL-3 code description

Energy Technology Data Exchange (ETDEWEB)

Lanning, D.D.; Mohr, C.L.; Panisko, F.E.; Stewart, K.B.

1978-01-01

GAPCON-3 is a computer program that predicts the thermal and mechanical behavior of an operating fuel rod during its normal lifetime. The code calculates temperatures, dimensions, stresses, and strains for the fuel and the cladding in both the radial and axial directions for each step of the user specified power history. The method of weighted residuals is for the steady state temperature calculation, and is combined with a finite difference approximation of the time derivative for transient conditions. The stress strain analysis employs an iterative axisymmetric finite element procedure that includes plasticity and creep for normal and pellet-clad mechanical interaction loads. GAPCON-3 can solve steady state and operational transient problems. Comparisons of GAPCON-3 predictions to both closed form analytical solutions and actual inpile instrumented fuel rod data have demonstrated the ability of the code to calculate fuel rod behavior. GAPCON-3 features a restart capability and an associated plot package unavailable in previous GAPCON series codes.

Evaluation procedure of creep-fatigue defect growth in high temperature condition and application

International Nuclear Information System (INIS)

Park, Chang Gyu; Kim, Jong Bum; Lee, Jae Han

2003-12-01

This study proposed the evaluation procedure of creep-fatigue defect growth on the high-temperature cylindrical structure applicable to the KALIMER, which is developed by KAERI. Parameters used in creep defect growth and the evaluation codes with these parameters were analyzed. In UK, the evaluation procedure of defect initiation and growth were proposed with R5/R6 code. In Japan, simple evauation method was proposed by JNC. In France, RCC-MR A16 code which was evaluation procedure of the creep-fatigue defect initiation and growth related to leak before break was developed, and equations related to load conditions were modified lately. As an application example, the creep-fatigue defect growth on circumferential semi-elliptical surface defect in high temperature cylindrical structure was evaluated by RCC-MR A16

Optimal codes as Tanner codes with cyclic component codes

DEFF Research Database (Denmark)

Høholdt, Tom; Pinero, Fernando; Zeng, Peng

2014-01-01

In this article we study a class of graph codes with cyclic code component codes as affine variety codes. Within this class of Tanner codes we find some optimal binary codes. We use a particular subgraph of the point-line incidence plane of A(2,q) as the Tanner graph, and we are able to describe ...

Validation of the XLACS code related to contribution of resolved and unresolved resonances and background cross sections

International Nuclear Information System (INIS)

Anaf, J.; Chalhoub, E.S.

1990-01-01

The procedures for calculating contributions of resolved and unresolved resonances and background cross sections, in XLACS code, were revised. Constant weighting function and zero Kelvin temperature were considered. Discrepancies found were corrected and now the validated XLACS code generates results that are correct and in accordance with its originally established procedures. (author)

Truncation Depth Rule-of-Thumb for Convolutional Codes

Science.gov (United States)

Moision, Bruce

2009-01-01

In this innovation, it is shown that a commonly used rule of thumb (that the truncation depth of a convolutional code should be five times the memory length, m, of the code) is accurate only for rate 1/2 codes. In fact, the truncation depth should be 2.5 m/(1 - r), where r is the code rate. The accuracy of this new rule is demonstrated by tabulating the distance properties of a large set of known codes. This new rule was derived by bounding the losses due to truncation as a function of the code rate. With regard to particular codes, a good indicator of the required truncation depth is the path length at which all paths that diverge from a particular path have accumulated the minimum distance of the code. It is shown that the new rule of thumb provides an accurate prediction of this depth for codes of varying rates.

Evaluation of Code Blue Implementation Outcomes

Directory of Open Access Journals (Sweden)

Bengü Özütürk

2015-09-01

Full Text Available Aim: In this study, we aimed to emphasize the importance of Code Blue implementation and to determine deficiencies in this regard. Methods: After obtaining the ethics committee approval, 225 patient’s code blue call data between 2012 and 2014 January were retrospectively analyzed. Age and gender of the patients, date and time of the call and the clinics giving Code Blue, the time needed for the Code Blue team to arrive, the rates of false Code Blue calls, reasons for Code Blue calls and patient outcomes were investigated. Results: A total of 225 patients (149 male, 76 female were evaluated in the study. The mean age of the patients was 54.1 years. 142 (67.2% Code Blue calls occurred after hours and by emergency unit. The mean time for the Code Blue team to arrive was 1.10 minutes. Spontaneous circulation was provided in 137 patients (60.8%; 88 (39.1% died. The most commonly identified possible causes were of cardiac origin. Conclusion: This study showed that Code Blue implementation with a professional team within an efficient and targeted time increase the survival rate. Therefore, we conclude that the application of Code Blue carried out by a trained team is an essential standard in hospitals. (The Medical Bulletin of Haseki 2015; 53:204-8

Pricing of common cosmetic surgery procedures: local economic factors trump supply and demand.

Science.gov (United States)

Richardson, Clare; Mattison, Gennaya; Workman, Adrienne; Gupta, Subhas

2015-02-01

The pricing of cosmetic surgery procedures has long been thought to coincide with laws of basic economics, including the model of supply and demand. However, the highly variable prices of these procedures indicate that additional economic contributors are probable. The authors sought to reassess the fit of cosmetic surgery costs to the model of supply and demand and to determine the driving forces behind the pricing of cosmetic surgery procedures. Ten plastic surgery practices were randomly selected from each of 15 US cities of various population sizes. Average prices of breast augmentation, mastopexy, abdominoplasty, blepharoplasty, and rhytidectomy in each city were compared with economic and demographic statistics. The average price of cosmetic surgery procedures correlated substantially with population size (r = 0.767), cost-of-living index (r = 0.784), cost to own real estate (r = 0.714), and cost to rent real estate (r = 0.695) across the 15 US cities. Cosmetic surgery pricing also was found to correlate (albeit weakly) with household income (r = 0.436) and per capita income (r = 0.576). Virtually no correlations existed between pricing and the density of plastic surgeons (r = 0.185) or the average age of residents (r = 0.076). Results of this study demonstrate a correlation between costs of cosmetic surgery procedures and local economic factors. Cosmetic surgery pricing cannot be completely explained by the supply-and-demand model because no association was found between procedure cost and the density of plastic surgeons. © 2015 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com.

Performance Analysis for Cooperative Communication System with QC-LDPC Codes Constructed with Integer Sequences

Directory of Open Access Journals (Sweden)

Yan Zhang

2015-01-01

Full Text Available This paper presents four different integer sequences to construct quasi-cyclic low-density parity-check (QC-LDPC codes with mathematical theory. The paper introduces the procedure of the coding principle and coding. Four different integer sequences constructing QC-LDPC code are compared with LDPC codes by using PEG algorithm, array codes, and the Mackey codes, respectively. Then, the integer sequence QC-LDPC codes are used in coded cooperative communication. Simulation results show that the integer sequence constructed QC-LDPC codes are effective, and overall performance is better than that of other types of LDPC codes in the coded cooperative communication. The performance of Dayan integer sequence constructed QC-LDPC is the most excellent performance.

Revised C++ coding conventions

CERN Document Server

Callot, O

2001-01-01

This document replaces the note LHCb 98-049 by Pavel Binko. After a few years of practice, some simplification and clarification of the rules was needed. As many more people have now some experience in writing C++ code, their opinion was also taken into account to get a commonly agreed set of conventions

APC: A new code for Atmospheric Polarization Computations

International Nuclear Information System (INIS)

Korkin, Sergey V.; Lyapustin, Alexei I.; Rozanov, Vladimir V.

2013-01-01

A new polarized radiative transfer code Atmospheric Polarization Computations (APC) is described. The code is based on separation of the diffuse light field into anisotropic and smooth (regular) parts. The anisotropic part is computed analytically. The smooth regular part is computed numerically using the discrete ordinates method. Vertical stratification of the atmosphere, common types of bidirectional surface reflection and scattering by spherical particles or spheroids are included. A particular consideration is given to computation of the bidirectional polarization distribution function (BPDF) of the waved ocean surface. -- Highlights: •A new code, APC, has been developed. •The code was validated against well-known codes. •The BPDF for an arbitrary Mueller matrix is computed

Comparisons of ASME-code fatigue-evaluation methods for nuclear Class 1 piping with Class 2 or 3 piping

International Nuclear Information System (INIS)

Rodabaugh, E.C.

1983-06-01

The fatigue evaluation procedure used in the ASME Boiler and Pressure Vessel Code, Sect. III, Nuclear Power Plant Components, for Class 1 piping is different from the procedure used for Class 2 or 3 piping. The basis for each procedure is described, and correlations between the two procedures are presented. Conditions under which either procedure or both may be unconservative are noted. Potential changes in the Class 2 or 3 piping procedure to explicitly cover all loadings are discussed. However, the report is intended to be informative, and while the contents of the report may guide future Code changes, specific recommendations are not given herein

Review and comparison of WWER and LWR Codes and Standards

International Nuclear Information System (INIS)

Buckthorpe, D.; Tashkinov, A.; Brynda, J.; Davies, L.M.; Cueto-Felgeueroso, C.; Detroux, P.; Bieniussa, K.; Guinovart, J.

2003-01-01

The results of work on a collaborative project on comparison of Codes and Standards used for safety related components of the WWER and LWR type reactors is presented. This work was performed on behalf of the European Commission, Working Group Codes and Standards and considers areas such as rules, criteria and provisions, failure mechanisms , derivation and understanding behind the fatigue curves, piping, materials and aging, manufacturing and ISI. WWERs are essentially designed and constructed using the Russian PNAE Code together with special provisions in a few countries (e.g. Czech Republic) from national standards. The LWR Codes have a strong dependence on the ASME Code. Also within Western Europe other codes are used including RCC-M, KTA and British Standards. A comparison of procedures used in all these codes and standards have been made to investigate the potential for equivalencies between the codes and any grounds for future cooperation between eastern and western experts in this field. (author)

Deriving Word Order in Code-Switching: Feature Inheritance and Light Verbs

Science.gov (United States)

Shim, Ji Young

2013-01-01

This dissertation investigates code-switching (CS), the concurrent use of more than one language in conversation, commonly observed in bilingual speech. Assuming that code-switching is subject to universal principles, just like monolingual grammar, the dissertation provides a principled account of code-switching, with particular emphasis on OV~VO…

The procedure execution manager and its application to Advanced Photon Source operation

International Nuclear Information System (INIS)

Borland, M.

1997-01-01

The Procedure Execution Manager (PEM) combines a complete scripting environment for coding accelerator operation procedures with a manager application for executing and monitoring the procedures. PEM is based on Tcl/Tk, a supporting widget library, and the dp-tcl extension for distributed processing. The scripting environment provides support for distributed, parallel execution of procedures along with join and abort operations. Nesting of procedures is supported, permitting the same code to run as a top-level procedure under operator control or as a subroutine under control of another procedure. The manager application allows an operator to execute one or more procedures in automatic, semi-automatic, or manual modes. It also provides a standard way for operators to interact with procedures. A number of successful applications of PEM to accelerator operations have been made to date. These include start-up, shutdown, and other control of the positron accumulator ring (PAR), low-energy transport (LET) lines, and the booster rf systems. The PAR/LET procedures make nested use of PEM's ability to run parallel procedures. There are also a number of procedures to guide and assist tune-up operations, to make accelerator physics measurements, and to diagnose equipment. Because of the success of the existing procedures, expanded use of PEM is planned

Anaesthesia for Ambulatory Paediatric Surgery: Common ...

African Journals Online (AJOL)

BACKGROUND: Ambulatory surgical care accounts for over 70% of elective procedures in Northern America. Ambulatory paediatric surgical practice is not widespread in Nigeria. This report examined clinical indicators for quality care in paediatric ambulatory surgery using common outcomes after day case procedures as ...

A study on the nuclear computer codes installation and management system

International Nuclear Information System (INIS)

Kim, Yeon Seung; Huh, Young Hwan; Kim, Hee Kyung; Kang, Byung Heon; Kim, Ko Ryeo; Suh, Soong Hyok; Choi, Young Gil; Lee, Jong Bok

1990-12-01

From 1987 a number of technical transfer related to nuclear power plant had been performed from C-E for YGN 3 and 4 construction. Among them, installation and management of the computer codes for YGN 3 and 4 fuel and nuclear steam supply system was one of the most important project. Main objectives of this project are to establish the nuclear computer code management system, to develop QA procedure for nuclear codes, to secure the nuclear code reliability and to extend techanical applicabilities including the user-oriented utility programs for nuclear codes. Contents of performing the project in this year was to produce 215 transmittal packages of nuclear codes installation including making backup magnetic tape and microfiche for software quality assurance. Lastly, for easy reference about the nuclear codes information we presented list of code names and information on the codes which were introduced from C-E. (Author)

Fusion Imaging for Procedural Guidance.

Science.gov (United States)

Wiley, Brandon M; Eleid, Mackram F; Thaden, Jeremy J

2018-05-01

The field of percutaneous structural heart interventions has grown tremendously in recent years. This growth has fueled the development of new imaging protocols and technologies in parallel to help facilitate these minimally-invasive procedures. Fusion imaging is an exciting new technology that combines the strength of 2 imaging modalities and has the potential to improve procedural planning and the safety of many commonly performed transcatheter procedures. In this review we discuss the basic concepts of fusion imaging along with the relative strengths and weaknesses of static vs dynamic fusion imaging modalities. This review will focus primarily on echocardiographic-fluoroscopic fusion imaging and its application in commonly performed transcatheter structural heart procedures. Copyright © 2017 Sociedad Española de Cardiología. Published by Elsevier España, S.L.U. All rights reserved.

Miscoding and other user errors: importance of ongoing education for proper blood glucose monitoring procedures.

Science.gov (United States)

Schrock, Linda E

2008-07-01

This article reviews the literature to date and reports on a new study that documented the frequency of manual code-requiring blood glucose (BG) meters that were miscoded at the time of the patient's initial appointment in a hospital-based outpatient diabetes education program. Between January 1 and May 31, 2007, the type of BG meter and the accuracy of the patient's meter code (if required) and procedure for checking BG were checked during the initial appointment with the outpatient diabetes educator. If indicated, reeducation regarding the procedure for the BG meter code entry and/or BG test was provided. Of the 65 patients who brought their meter requiring manual entry of a code number or code chip to the initial appointment, 16 (25%) were miscoded at the time of the appointment. Two additional problems, one of dead batteries and one of improperly stored test strips, were identified and corrected at the first appointment. These findings underscore the importance of checking the patient's BG meter code (if required) and procedure for testing BG at each encounter with a health care professional or providing the patient with a meter that does not require manual entry of a code number or chip to match the container of test strips (i.e., an autocode meter).

Acute procedural outcomes of orbital atherectomy for the treatment of common femoral artery disease: Sub-analysis of the CONFIRM Registries.

Science.gov (United States)

Lee, Michael S; Heikali, Daniel; Mustapha, Jihad; Adams, George; Mahmud, Ehtisham

2017-08-01

This analysis compared the angiographic outcomes of patients treated with orbital atherectomy for calcified common femoral artery (CFA) and superficial femoral artery (SFA) disease. The ideal revascularization strategy for CFA disease is unknown. Endarterectomy has been considered the standard of care for CFA disease for over 50 years. Endovascular intervention is becoming more commonly used to revascularize the CFA given the advances in technology and the less invasive nature of the procedure. Patient demographics, lesion characteristics, and procedure data for all CONFIRM patients with at least one CFA lesion location ( n=147 patients; n=200 lesions) were compared to patients with at least one SFA lesion location ( n=1508 patients; n=2367 lesions). The primary endpoint was angiographic complication, defined as the composite of dissection, perforation, slow flow, closure, spasm, embolism, or thrombosis. The CFA group had more patients with Rutherford class 4 and shorter lesion length. The CFA group had a higher final residual stenosis, shorter total run time, and shorter total inflation time. The primary endpoint was lower in the CFA group compared with the SFA group (17% vs 24%, p=0.02), driven by a lower dissection rate (10% vs 15%, p=0.04). Plaque modification of the CFA with orbital atherectomy was safe and compared favorably with SFA disease. The need for bail-out stenting was low. A randomized trial is needed to determine the ideal treatment strategy for calcified CFA disease.

Channel coding in the space station data system network

Science.gov (United States)

Healy, T.

1982-01-01

A detailed discussion of the use of channel coding for error correction, privacy/secrecy, channel separation, and synchronization is presented. Channel coding, in one form or another, is an established and common element in data systems. No analysis and design of a major new system would fail to consider ways in which channel coding could make the system more effective. The presence of channel coding on TDRS, Shuttle, the Advanced Communication Technology Satellite Program system, the JSC-proposed Space Operations Center, and the proposed 30/20 GHz Satellite Communication System strongly support the requirement for the utilization of coding for the communications channel. The designers of the space station data system have to consider the use of channel coding.

Impact of procedure on the post-operative infection risk of patients after elective colon surgery.

Science.gov (United States)

Blitzer, David N; Davis, John M; Ahmed, Nasim; Kuo, Yen-Hong; Kuo, Yen-Liang

2014-12-01

Post-operative infection impacts the quality of patient care, prolongs the length of hospital stay, and utilizes more health care resources. The purpose of this study was to compare the rates of surgical site infection among three major surgical procedures for treating patients with colon pathology. The location of colon resection impacts the post-operative infection rate. A retrospective cohort study was conducted by using the 2006 Nationwide Inpatient Sample. Adult patients (age ≥18 yr) with colon diseases are the population of interest. The disease status and procedures were categorized according to the International Classification of Diseases, Ninth Revision, Clinical Modification (ICD-9-CM). Patients with a primary diagnosis of diverticulosis of the colon without hemorrhage (ICD-9-CM codes: 562.11 and 562.12) or malignant neoplasm of the colon (ICD-9-CM codes: 153.x, where x represents the possible digits within this ICD-9-CM code category), with procedures of open and other right hemicolectomy (ORH; ICD-9-CM code: 45.73) or open and other left hemicolectomy (OLH; ICD-9-CM code: 45.75), or open and other sigmoidectomy (OS; ICD-9-CM code: 45.76) were included for this study. The primary measured outcome for the study was surgical site infection. There were an estimated 26,381 ORH procedures, 9,558 OLH procedures, and 31,656 OS procedures performed in 2006. There was a significant difference among procedures with respect to their age distributions (mean [standard error]: ORH vs. OLH vs. OS=70.5 [0.2] vs. 63.8 [0.3] vs. 59.5 [0.2] yr, pinfection rates: ORH vs. OLH vs. OS=2.9% vs. 5.6% vs. 4.9%, pinfection for OLH (AOR [95% CI]: 1.31 [1.04-1.64], p=0.02) compared with OS. Different sites of colon operations were associated with different risks of surgical site infections. Accordingly, appropriate pre-operative measures should address these differences.

Shakedown analysis by finite element incremental procedures

International Nuclear Information System (INIS)

Borkowski, A.; Kleiber, M.

1979-01-01

It is a common occurence in many practical problems that external loads are variable and the exact time-dependent history of loading is unknown. Instead of it load is characterized by a given loading domain: a convex polyhedron in the n-dimensional space of load parameters. The problem is then to check whether a structure shakes down, i.e. responds elastically after a few elasto-plastic cycles, or not to a variable loading as defined above. Such check can be performed by an incremental procedure. One should reproduce incrementally a simple cyclic process which consists of proportional load paths that connect the origin of the load space with the corners of the loading domain. It was proved that if a structure shakes down to such loading history then it is able to adopt itself to an arbitrary load path contained in the loading domain. The main advantage of such approach is the possibility to use existing incremental finite-element computer codes. (orig.)

Applicability of coupled code RELAP5/GOTHIC to NPP Krsko MSLB calculation

International Nuclear Information System (INIS)

Keco, M.; Debrecin, N.; Grgic, D.

2005-01-01

Usual way to analyze Main Steam Line Break (MSLB) accident in PWR plants is to calculate core and containment responses in two separate calculations. In first calculation system code is used to address behaviour of nuclear steam supply system and containment is modelled mainly as a boundary condition. In second calculation mass and energy release data are used to perform containment analysis. Coupled code R5G realized by direct explicit coupling of system code RELAP5/MOD3.3 and containment code GOTHIC is able to perform both calculations simultaneously. In this paper R5G is applied to calculation of MSLB accident in large dry containment of NPP Krsko. Standard separate calculation is performed first and then both core and containment responses are compared against corresponding coupled code results. Two versions of GOTHIC code are used, one old ver 3.4e and the last one ver 7.2. As expected, differences between standard procedure and coupled calculations are small. The performed analyses showed that classical uncoupled approach is applicable in case of large dry containment calculation, but that new approach can bring some additional insight in understanding of the transient and that can be used as simple and reliable procedure in performing MSLB calculation without any significant calculation overhead. (author)

LINK codes TRAC-BF1/PARCSv2.7 in LINUX without external communication interface

International Nuclear Information System (INIS)

Barrachina, T.; Garcia-Fenoll, M.; Abarca, A.; Miro, R.; Verdu, G.; Concejal, A.; Solar, A.

2014-01-01

The TRAC-BF1 code is still widely used by the nuclear industry for safety analysis. The plant models developed using this code are highly validated, so it is advisable to continue improving this code before migrating to another completely different code. The coupling with the NRC neutronic code PARCSv2.7 increases the simulation capabilities in transients in which the power distribution plays an important role. In this paper, the procedure for the coupling of TRAC-BF1 and PARCSv2.7 codes without PVM and in Linux is presented. (Author)

IAEA activities to prepare safety codes and guides for thermal neutron nuclear power plants

International Nuclear Information System (INIS)

Iansiti, E.

1977-01-01

In accordance with the programme presented to, and endorsed by, the eighteenth General Conference in September 1974, the IAEA is now developing a complete set of safety codes and guides that will represent recommendations for the safety of thermal neutron power plants. The safety codes outline the minimum requirements for achieving this safety, and the safety guides set forth the criteria, procedures and methods to implement the safety codes. The whole programme is directed towards the five areas of Governmental Organization, Siting, Design, Operation, and Quality Assurance. One Scientific Secretary from the Agency Secretariat is responsible for each of these areas and a Co-ordinator takes care of common problems. For the development of each of these documents a working group of a few world experts is first convened which prepare a preliminary draft. This draft is then reviewed by a larger, international Technical Review Committee (one for each of the five areas) and a subsequent review by the Senior Advisory Group - with representatives from 20 states - ensures that the document is well coordinated within the programme. At this stage, it is sent to Member States for comments. The Technical Review Committee concerned is reconvened to integrate these comments into the document, and, after a final review by the Senior Advisory Group, the document is ready for transmission to the Director General of the Agency for endorsement and publication. A preliminary to this procedure is the collation by the Secretariat of large amounts of information submitted by Member States so that the first draft is really based on a very complete knowledge of what is done in each area all over the world. This collation frequently reveals differences in approach which are not random but due, rather, to the local conditions and the types of reactors. These differences must be harmonized in the documents produced without detracting from the effectiveness of the code or guide. The whole

Determination of Solution Accuracy of Numerical Schemes as Part of Code and Calculation Verification

Energy Technology Data Exchange (ETDEWEB)

Blottner, F.G.; Lopez, A.R.

1998-10-01

This investigation is concerned with the accuracy of numerical schemes for solving partial differential equations used in science and engineering simulation codes. Richardson extrapolation methods for steady and unsteady problems with structured meshes are presented as part of the verification procedure to determine code and calculation accuracy. The local truncation error de- termination of a numerical difference scheme is shown to be a significant component of the veri- fication procedure as it determines the consistency of the numerical scheme, the order of the numerical scheme, and the restrictions on the mesh variation with a non-uniform mesh. Genera- tion of a series of co-located, refined meshes with the appropriate variation of mesh cell size is in- vestigated and is another important component of the verification procedure. The importance of mesh refinement studies is shown to be more significant than just a procedure to determine solu- tion accuracy. It is suggested that mesh refinement techniques can be developed to determine con- sistency of numerical schemes and to determine if governing equations are well posed. The present investigation provides further insight into the conditions and procedures required to effec- tively use Richardson extrapolation with mesh refinement studies to achieve confidence that sim- ulation codes are producing accurate numerical solutions.

Compendium of computer codes for the safety analysis of LMFBR's

International Nuclear Information System (INIS)

1975-06-01

A high level of mathematical sophistication is required in the safety analysis of LMFBR's to adequately meet the demands for realism and confidence in all areas of accident consequence evaluation. The numerical solution procedures associated with these analyses are generally so complex and time consuming as to necessitate their programming into computer codes. These computer codes have become extremely powerful tools for safety analysis, combining unique advantages in accuracy, speed and cost. The number, diversity and complexity of LMFBR safety codes in the U. S. has grown rapidly in recent years. It is estimated that over 100 such codes exist in various stages of development throughout the country. It is inevitable that such a large assortment of codes will require rigorous cataloguing and abstracting to aid individuals in identifying what is available. It is the purpose of this compendium to provide such a service through the compilation of code summaries which describe and clarify the status of domestic LMFBR safety codes. (U.S.)

Methodology for Evaluating Cost-effectiveness of Commercial Energy Code Changes

Energy Technology Data Exchange (ETDEWEB)

Hart, Philip R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Liu, Bing [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-01-31

This document lays out the U.S. Department of Energy’s (DOE’s) method for evaluating the cost-effectiveness of energy code proposals and editions. The evaluation is applied to provisions or editions of the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Standard 90.1 and the International Energy Conservation Code (IECC). The method follows standard life-cycle cost (LCC) economic analysis procedures. Cost-effectiveness evaluation requires three steps: 1) evaluating the energy and energy cost savings of code changes, 2) evaluating the incremental and replacement costs related to the changes, and 3) determining the cost-effectiveness of energy code changes based on those costs and savings over time.

Optimal Near-Hitless Network Failure Recovery Using Diversity Coding

Science.gov (United States)

Avci, Serhat Nazim

2013-01-01

Link failures in wide area networks are common and cause significant data losses. Mesh-based protection schemes offer high capacity efficiency but they are slow, require complex signaling, and instable. Diversity coding is a proactive coding-based recovery technique which offers near-hitless (sub-ms) restoration with a competitive spare capacity…

National Hospital Discharge Survey: 2002 annual summary with detailed diagnosis and procedure data.

Science.gov (United States)

Kozak, Lola J; Owings, Maria F; Hall, Margaret J

2005-03-01

This report presents 2002 national estimates and selected trend data on the use of non-Federal short-stay hospitals in the United States. Estimates are provided by selected patient and hospital characteristics, diagnoses, and surgical and nonsurgical procedures performed. Estimates of diagnoses and procedures are presented according to International Classification of Diseases, 9th Revision, Clinical Modification (ICD-9-CM) codes. The estimates are based on data collected through the National Hospital Discharge Survey (NHDS). The survey has been conducted annually since 1965. In 2002, data were collected for approximately 327,000 discharges. Of the 474 eligible non-Federal short-stay hospitals in the sample, 445 (94 percent) responded to the survey. An estimated 33.7 million inpatients were discharged from non-Federal short-stay hospitals in 2002. They used 164.2 million days of care and had an average length of stay of 4.9 days. Common first-listed discharge diagnoses included delivery, ischemic heart disease, psychoses, pneumonia, and malignant neoplasms. Inpatients had 6.8 million cardiovascular procedures and 6.6 million obstetric procedures. Males had higher rates for cardiac procedures such as cardiac catheterization and coronary artery bypass graft, but males and females had similar rates of pacemaker procedures. The number and rate of all cesarean deliveries, primary and repeat, rose from 1995 to 2002; the rate of vaginal birth after cesarean delivery dropped from 35.5 in 1995 to 15.8 in 2002.

(U) Ristra Next Generation Code Report

Energy Technology Data Exchange (ETDEWEB)

Hungerford, Aimee L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Daniel, David John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-09-22

LANL’s Weapons Physics management (ADX) and ASC program office have defined a strategy for exascale-class application codes that follows two supportive, and mutually risk-mitigating paths: evolution for established codes (with a strong pedigree within the user community) based upon existing programming paradigms (MPI+X); and Ristra (formerly known as NGC), a high-risk/high-reward push for a next-generation multi-physics, multi-scale simulation toolkit based on emerging advanced programming systems (with an initial focus on data-flow task-based models exemplified by Legion [5]). Development along these paths is supported by the ATDM, IC, and CSSE elements of the ASC program, with the resulting codes forming a common ecosystem, and with algorithm and code exchange between them anticipated. Furthermore, solution of some of the more challenging problems of the future will require a federation of codes working together, using established-pedigree codes in partnership with new capabilities as they come on line. The role of Ristra as the high-risk/high-reward path for LANL’s codes is fully consistent with its role in the Advanced Technology Development and Mitigation (ATDM) sub-program of ASC (see Appendix C), in particular its emphasis on evolving ASC capabilities through novel programming models and data management technologies.

Graphic user interface for COSMOS code

International Nuclear Information System (INIS)

Oh, Je Yong; Koo, Yang Hyun; Lee, Byung Ho; Cheon, Jin Sik; Sohn, Dong Seong

2003-06-01

The Graphic User Interface (GUI) - which consisted of graphical elements such as windows, menu, button, icon, and so on - made it possible that the computer could be easily used for common users. Hence, the GUI was introduced to improve the efficiency to input parameters in COSMOS code. The functions to output graphs on the screen and postscript files were also added. And the graph library can be applied to the other codes. The details of principles of GUI and graphic library were described in the report

Frey procedure combined with biliary diversion in chronic pancreatitis.

Science.gov (United States)

Merdrignac, Aude; Bergeat, Damien; Rayar, Michel; Harnoy, Yann; Turner, Kathleen; Courtin-Tanguy, Laetitia; Boudjema, Karim; Meunier, Bernard; Sulpice, Laurent

2016-11-01

The Frey procedure has become the standard operative treatment in chronic painful pancreatitis. Biliary diversion could be combined when associated with common bile duct obstruction. The aim of the present study was to evaluate the impact of the type of biliary diversion combined with the Frey procedure on late morbidity. The data from consecutive patients undergoing the Frey procedure and having a minimum follow-up of 2 years were extracted from a maintained prospective database. The mean endpoint was the rate of secondary biliary stricture after the Frey procedure combined with biliary diversion (bilioenteric anastomosis or common bile duct reinsertion in the resection cavity). Between 2006 and 2013, 55 consecutive patients underwent the Frey procedure. Twenty-nine patients had common bile duct obstruction (52.7%). The technique of biliary diversion resulted in bilioenteric anastomosis in 19 patients (65.5%) and common bile duct reinsertion in 10 patients (34.5%). Preoperative characteristics and early surgical outcomes were comparable. Pain control was similar. There was significantly more secondary biliary stricture after common bile duct reinsertion than after bilioenteric anastomosis (60% vs 11%, P = .008). Combined bilioenteric anastomosis during the Frey procedure is an efficient technique for treating common bile duct obstruction that complicates chronic painful pancreatitis. Bilioenteric anastomosis was associated with less secondary biliary stricture than common bile duct reinsertion in the pancreatic resection cavity. Copyright © 2016 Elsevier Inc. All rights reserved.

How family carers engage with technical health procedures in the home: a grounded theory study.

Science.gov (United States)

McDonald, Janet; McKinlay, Eileen; Keeling, Sally; Levack, William

2015-07-06

To explore the experiences of family carers who manage technical health procedures at home and describe their learning process. A qualitative study using grounded theory. New Zealand family carers (21 women, 5 men) who managed technical health procedures such as enteral feeding, peritoneal dialysis, tracheostomy care, a central venous line or urinary catheter. In addition, 15 health professionals involved in teaching carers were interviewed. Semistructured interviews were coded soon after completion and preliminary analysis influenced subsequent interviews. Additional data were compared with existing material and as analysis proceeded, initial codes were grouped into higher order concepts until a core concept was described. Interviewing continued until no new ideas emerged and concepts were well defined. The response of carers to the role of managing technical health procedures in the home is presented in terms of five dispositions: (1) Embracing care, (2) Resisting, (3) Reluctant acceptance, (4) Relinquishing and (5) Being overwhelmed. These dispositions were not static and carers commonly changed between them. Embracing care included cognitive understanding of the purpose and benefits of a procedure; accepting a 'technical' solution; practical management; and an emotional response. Accepting embrace is primarily motivated by perceived benefits for the recipient. It may also be driven by a lack of alternatives. Resisting or reluctant acceptance results from a lack of understanding about the procedure or willingness to manage it. Carers need adequate support to avoid becoming overwhelmed, and there are times when it is appropriate to encourage them to relinquish care for the sake of their own needs. The concept of embracing care encourages health professionals to extend their attention beyond simply the practical aspects of technical procedures to assessing and addressing carers' emotional and behavioural responses to health technology during the training process

Upgrades to the WIMS-ANL code

International Nuclear Information System (INIS)

Woodruff, W. L.

1998-01-01

The dusty old source code in WIMS-D4M has been completely rewritten to conform more closely with current FORTRAN coding practices. The revised code contains many improvements in appearance, error checking and in control of the output. The output is now tabulated to fit the typical 80 column window or terminal screen. The Segev method for resonance integral interpolation is now an option. Most of the dimension limitations have been removed and replaced with variable dimensions within a compile-time fixed container. The library is no longer restricted to the 69 energy group structure, and two new libraries have been generated for use with the code. The new libraries are both based on ENDF/B-VI data with one having the original 69 energy group structure and the second with a 172 group structure. The common source code can be used with PCs using both Windows 95 and NT, with a Linux based operating system and with UNIX based workstations. Comparisons of this version of the code to earlier evaluations with ENDF/B-V are provided, as well as, comparisons with the new libraries

Upgrades to the WIMS-ANL code

International Nuclear Information System (INIS)

Woodruff, W.L.; Leopando, L.S.

1998-01-01

The dusty old source code in WIMS-D4M has been completely rewritten to conform more closely with current FORTRAN coding practices. The revised code contains many improvements in appearance, error checking and in control of the output. The output is now tabulated to fit the typical 80 column window or terminal screen. The Segev method for resonance integral interpolation is now an option. Most of the dimension limitations have been removed and replaced with variable dimensions within a compile-time fixed container. The library is no longer restricted to the 69 energy group structure, and two new libraries have been generated for use with the code. The new libraries are both based on ENDF/B-VI data with one having the original 69 energy group structure and the second with a 172 group structure. The common source code can be used with PCs using both Windows 95 and NT, with a Linux based operating system and with UNIX based workstations. Comparisons of this version of the code to earlier evaluations with ENDF/B-V are provided, as well as, comparisons with the new libraries. (author)

TMACS test procedure TP001: Alarm management. Revision 6

International Nuclear Information System (INIS)

Scanlan, P.K.

1994-01-01

The TMACS Software Project Test Procedures translate the project's acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure addresses the Alarm Management requirements of the TMACS. The features to be tested are: real-time alarming on high and low level and discrete alarms, equipment alarms, dead-band filtering, alarm display color coding, alarm acknowledgement, and alarm logging

A Procedure to Address the Fuel Rod Failures during LB-LOCA Transient in Atucha-2 NPP

Directory of Open Access Journals (Sweden)

Martina Adorni

2011-01-01

Full Text Available Depending on the specific event scenario and on the purpose of the analysis, the availability of calculation methods that are not implemented in the standard system thermal hydraulic codes might be required. This may imply the use of a dedicated fuel rod thermomechanical computer code. This paper provides an outline of the methodology for the analysis of the 2A LB-LOCA accident in Atucha-2 NPP and describes the procedure adopted for the use of the fuel rod thermomechanical code. The methodology implies the application of best estimate thermalhydraulics, neutron physics, and fuel pin performance computer codes, with the objective to verify the compliance with the specific acceptance criteria. The fuel pin performance code is applied with the main objective to evaluate the extent of cladding failures during the transient. The procedure consists of a deterministic calculation by the fuel performance code of each individual fuel rod during its lifetime and in the subsequent LB-LOCA transient calculations. The boundary and initial conditions are provided by core physics and three-dimensional neutron kinetic coupled thermal-hydraulic system codes calculations. The procedure is completed by the sensitivity calculations and the application of the probabilistic method, which are outside the scope of the current paper.

Procedures for the selection of stopping power ratios for electron beams: Comparison of IAEA TRS procedures and of DIN procedures with Monte Carlo results

International Nuclear Information System (INIS)

Roos, M.; Christ, G.

2000-01-01

In the International Code of Practice IAEA TRS-381 the stopping power ratios water/air are selected according to the half-value depth and the depth of measurement. In the German Standard DIN 6800-2 a different procedure is recommended, which, in addition, takes the practical electron range into account; the stopping power data for monoenergetic beams from IAEA TRS-381 are used. Both procedures are compared with recent Monte Carlo calculations carried out for various beams of clinical accelerators. It is found that the DIN procedure shows a slightly better agreement. In addition, the stopping power ratios in IAEA TRS-381 are compared with those in DIN 6800-2 for the reference conditions of the beams from the PTB linac; the maximum deviation is not larger than 0.6%. (author)

MIDAS/PK code development using point kinetics model

International Nuclear Information System (INIS)

Song, Y. M.; Park, S. H.

1999-01-01

In this study, a MIDAS/PK code has been developed for analyzing the ATWS (Anticipated Transients Without Scram) which can be one of severe accident initiating events. The MIDAS is an integrated computer code based on the MELCOR code to develop a severe accident risk reduction strategy by Korea Atomic Energy Research Institute. In the mean time, the Chexal-Layman correlation in the current MELCOR, which was developed under a BWR condition, is appeared to be inappropriate for a PWR. So as to provide ATWS analysis capability to the MIDAS code, a point kinetics module, PKINETIC, has first been developed as a stand-alone code whose reference model was selected from the current accident analysis codes. In the next step, the MIDAS/PK code has been developed via coupling PKINETIC with the MIDAS code by inter-connecting several thermal hydraulic parameters between the two codes. Since the major concern in the ATWS analysis is the primary peak pressure during the early few minutes into the accident, the peak pressure from the PKINETIC module and the MIDAS/PK are compared with the RETRAN calculations showing a good agreement between them. The MIDAS/PK code is considered to be valuable for analyzing the plant response during ATWS deterministically, especially for the early domestic Westinghouse plants which rely on the operator procedure instead of an AMSAC (ATWS Mitigating System Actuation Circuitry) against ATWS. This capability of ATWS analysis is also important from the view point of accident management and mitigation

Code of Practice for Protection Against Ionizing Radiation Emitted from X-ray Analysis Equipment (1984)

International Nuclear Information System (INIS)

1984-01-01

Appropriate working rules, safety features and monitoring requirements for general X-ray analysis units or equipment are laid down in this Code which is intended for users of such equipment. The Code advises that establishments draw up their own working procedures based on appropriate legislation and on the recommendations contained in this Code. The Code also describes the requirements for X-ray analysis equipment necessary to ensure safety. (NEA) [fr

DART: A simulation code for charged particle beams

International Nuclear Information System (INIS)

White, R.C.; Barr, W.L.; Moir, R.W.

1989-01-01

This paper presents a recently modified version of the 2-D code, DART, which can simulate the behavior of a beam of charged particles whose trajectories are determined by electric and magnetic fields. This code was originally used to design laboratory-scale and full-scale beam direct converters. Since then, its utility has been expanded to allow more general applications. The simulation includes space charge, secondary electrons, and the ionization of neutral gas. A beam can contain up to nine superimposed beamlets of different energy and species. The calculation of energy conversion efficiency and the method of specifying the electrode geometry are described. Basic procedures for using the code are given, and sample input and output fields are shown. 7 refs., 18 figs

Experimental transport analysis code system in JT-60

International Nuclear Information System (INIS)

Hirayama, Toshio; Shimizu, Katsuhiro; Tani, Keiji; Shirai, Hiroshi; Kikuchi, Mitsuru

1988-03-01

Transport analysis codes have been developed in order to study confinement properties related to particle and energy balance in ohmically and neutral beam heated plasmas of JT-60. The analysis procedure is divided into three steps as follows: 1) LOOK ; The shape of the plasma boundary is identified with a fast boundary identification code of FBI by using magnetic data, and flux surfaces are calculated with a MHD equilibrium code of SELENE. The diagnostic data are mapped to flux surfaces for neutral beam heating calculation and/or for radial transport analysis. 2) OFMC ; On the basis of transformed data, an orbit following Monte Carlo code of OFMC calculates both profiles of power deposition and particle source of neutral beam injected into a plasma. 3) SCOOP ; In the last stage, a one dimensional transport code of SCOOP solves particle and energy balance for electron and ion, in order to evaluate transport coefficients as well as global parameters such as energy confinement time and the stored energy. The analysis results are provided to a data bank of DARTS that is used to find an overview of important consideration on confinement with a regression analysis code of RAC. (author)

RODMOD: a code for control rod positioning

International Nuclear Information System (INIS)

Vondy, D.R.; Fowler, T.B.

1978-11-01

The report documents a computer code which has been implemented to position control rods according to a prescribed schedule during the calculation of a reactor history. Control rods may be represented explicitly with or without internal black absorber conditions in selected energy groups, or fractional insertion may be done, or both, in a problem. There is provision for control rod follower, movement of materials through a series of zones in a closed loop, and shutdown rod insertion and subsequent removal to allow the reactor history calculation to be continued. This code is incorporated in the system containing the VENTURE diffusion theory neutronics and the BURNER exposure codes for routine use. The implemented automated procedures cause the prescribed control rod insertion schedule to be applied without the access of additional user input data during the calculation of a reactor operating history

Validation of comprehensive space radiation transport code

International Nuclear Information System (INIS)

Shinn, J.L.; Simonsen, L.C.; Cucinotta, F.A.

1998-01-01

The HZETRN code has been developed over the past decade to evaluate the local radiation fields within sensitive materials on spacecraft in the space environment. Most of the more important nuclear and atomic processes are now modeled and evaluation within a complex spacecraft geometry with differing material components, including transition effects across boundaries of dissimilar materials, are included. The atomic/nuclear database and transport procedures have received limited validation in laboratory testing with high energy ion beams. The codes have been applied in design of the SAGE-III instrument resulting in material changes to control injurious neutron production, in the study of the Space Shuttle single event upsets, and in validation with space measurements (particle telescopes, tissue equivalent proportional counters, CR-39) on Shuttle and Mir. The present paper reviews the code development and presents recent results in laboratory and space flight validation

CONCORDAT PROCEDURE. LEGISLATIVE AND JURISPRUDENTIAL HIGHLIGHTS

Directory of Open Access Journals (Sweden)

Mihaela Tofan

2014-11-01

Full Text Available Insolvency Code has revived theoreticians’ and practitioners’ discussions, equally. The voluntary arrangements procedure is considered a legal solution for the prevention and recovery from commercial actors’ financial difficulty. The current legal framework establishes a number of imperative conditions for the implementation of this procedure, but in many cases, the application of the current regulation generated different conclusions. In less than half a year, since the entry into force of the law, the practice for each court varied. The paper synthesizes separate opinions and proposes solutions for shaping a more precise legal framework.

SPORTS - a simple non-linear thermalhydraulic stability code

International Nuclear Information System (INIS)

Chatoorgoon, V.

1986-01-01

A simple code, called SPORTS, has been developed for two-phase stability studies. A novel method of solution of the finite difference equations was deviced and incorporated, and many of the approximations that are common in other stability codes are avoided. SPORTS is believed to be accurate and efficient, as small and large time-steps are permitted, and hence suitable for micro-computers. (orig.)

Audit of data and code use in the SR-Can safety assessment

Energy Technology Data Exchange (ETDEWEB)

Hicks, T.W.; Baldwin, T.D. [Galson Sciences Ltd, 5 Grosvenor House, Melton R oad, Oakham, Rutland LE15 6AX (United Kingdom)

2008-03-15

assessment should be obtained from controlled sources or suitable external references such as textbooks or peer-reviewed journals. Information should be provided on how data are managed and controlled such that the data are selected and used appropriately in safety assessment calculations. Procedures for ensuring that controlled and quality assured data and parameter values are obtained for use in the safety assessment should be explained. - Comprehensive references to controlled data sources and documentation on data abstraction to derive parameter values for all data sets should be included in the Data Report. The Data Report should become the primary reference for data and parameter values used in the safety assessment to build confidence that data and parameter values are used consistently and traceable throughout the safety assessment. - Information on the review criteria or procedures used by SKB to determine whether a particular data set is acceptable for use in the safety assessment should be provided. Procedures for accepting data for use in the safety assessment should include a check that the data qualification process has been documented, and confirmation that data were acquired under appropriate quality assurance procedures or that suitable data qualification methods have been applied (such as confirmation testing, peer review, or independent technical assessment). - To build confidence in SKB's process of review and approval of safety assessment reports, information should be provided on the method of selection of reviewers, the review criteria, the process of comment resolution, and the availability of review records. - The role of each code used in the safety assessment should be explained in the Model Summary Report, with cross-references to where associated features, events, and processes, input data, and code applications are presented, and to where results are used in the safety assessment documentation, possibly through greater use of the Assessment

Consistency and accuracy of diagnostic cancer codes generated by automated registration: comparison with manual registration

Directory of Open Access Journals (Sweden)

Codazzi Tiziana

2006-09-01

Full Text Available Abstract Background Automated procedures are increasingly used in cancer registration, and it is important that the data produced are systematically checked for consistency and accuracy. We evaluated an automated procedure for cancer registration adopted by the Lombardy Cancer Registry in 1997, comparing automatically-generated diagnostic codes with those produced manually over one year (1997. Methods The automatically generated cancer cases were produced by Open Registry algorithms. For manual registration, trained staff consulted clinical records, pathology reports and death certificates. The social security code, present and checked in both databases in all cases, was used to match the files in the automatic and manual databases. The cancer cases generated by the two methods were compared by manual revision. Results The automated procedure generated 5027 cases: 2959 (59% were accepted automatically and 2068 (41% were flagged for manual checking. Among the cases accepted automatically, discrepancies in data items (surname, first name, sex and date of birth constituted 8.5% of cases, and discrepancies in the first three digits of the ICD-9 code constituted 1.6%. Among flagged cases, cancers of female genital tract, hematopoietic system, metastatic and ill-defined sites, and oropharynx predominated. The usual reasons were use of specific vs. generic codes, presence of multiple primaries, and use of extranodal vs. nodal codes for lymphomas. The percentage of automatically accepted cases ranged from 83% for breast and thyroid cancers to 13% for metastatic and ill-defined cancer sites. Conclusion Since 59% of cases were accepted automatically and contained relatively few, mostly trivial discrepancies, the automatic procedure is efficient for routine case generation effectively cutting the workload required for routine case checking by this amount. Among cases not accepted automatically, discrepancies were mainly due to variations in coding practice.

[Data coding in the Israeli healthcare system - do choices provide the answers to our system's needs?].

Science.gov (United States)

Zelingher, Julian; Ash, Nachman

2013-05-01

The IsraeLi healthcare system has undergone major processes for the adoption of health information technologies (HIT), and enjoys high Levels of utilization in hospital and ambulatory care. Coding is an essential infrastructure component of HIT, and ts purpose is to represent data in a simplified and common format, enhancing its manipulation by digital systems. Proper coding of data enables efficient identification, storage, retrieval and communication of data. UtiLization of uniform coding systems by different organizations enables data interoperability between them, facilitating communication and integrating data elements originating in different information systems from various organizations. Current needs in Israel for heaLth data coding include recording and reporting of diagnoses for hospitalized patients, outpatients and visitors of the Emergency Department, coding of procedures and operations, coding of pathology findings, reporting of discharge diagnoses and causes of death, billing codes, organizational data warehouses and national registries. New national projects for cLinicaL data integration, obligatory reporting of quality indicators and new Ministry of Health (MOH) requirements for HIT necessitate a high Level of interoperability that can be achieved only through the adoption of uniform coding. Additional pressures were introduced by the USA decision to stop the maintenance of the ICD-9-CM codes that are also used by Israeli healthcare, and the adoption of ICD-10-C and ICD-10-PCS as the main coding system for billing purpose. The USA has also mandated utilization of SNOMED-CT as the coding terminology for the ELectronic Health Record problem list, and for reporting quality indicators to the CMS. Hence, the Israeli MOH has recently decided that discharge diagnoses will be reported using ICD-10-CM codes, and SNOMED-CT will be used to code the cLinical information in the EHR. We reviewed the characteristics, strengths and weaknesses of these two coding

Development of covariance capabilities in EMPIRE code

Energy Technology Data Exchange (ETDEWEB)

Herman,M.; Pigni, M.T.; Oblozinsky, P.; Mughabghab, S.F.; Mattoon, C.M.; Capote, R.; Cho, Young-Sik; Trkov, A.

2008-06-24

The nuclear reaction code EMPIRE has been extended to provide evaluation capabilities for neutron cross section covariances in the thermal, resolved resonance, unresolved resonance and fast neutron regions. The Atlas of Neutron Resonances by Mughabghab is used as a primary source of information on uncertainties at low energies. Care is taken to ensure consistency among the resonance parameter uncertainties and those for thermal cross sections. The resulting resonance parameter covariances are formatted in the ENDF-6 File 32. In the fast neutron range our methodology is based on model calculations with the code EMPIRE combined with experimental data through several available approaches. The model-based covariances can be obtained using deterministic (Kalman) or stochastic (Monte Carlo) propagation of model parameter uncertainties. We show that these two procedures yield comparable results. The Kalman filter and/or the generalized least square fitting procedures are employed to incorporate experimental information. We compare the two approaches analyzing results for the major reaction channels on {sup 89}Y. We also discuss a long-standing issue of unreasonably low uncertainties and link it to the rigidity of the model.

A General Solution Framework for Component-Commonality Problems

Directory of Open Access Journals (Sweden)

Nils Boysen

2009-05-01

Full Text Available Component commonality - the use of the same version of a component across multiple products - is being increasingly considered as a promising way to offer high external variety while retaining low internal variety in operations. However, increasing commonality has both positive and negative cost effects, so that optimization approaches are required to identify an optimal commonality level. As components influence to a greater or lesser extent nearly every process step along the supply chain, it is not surprising that a multitude of diverging commonality problems is being investigated in literature, each of which are developing a specific algorithm designed for the respective commonality problem being considered. The paper on hand aims at a general framework which is flexible and efficient enough to be applied to a wide range of commonality problems. Such a procedure based on a two-stage graph approach is presented and tested. Finally, flexibility of the procedure is shown by customizing the framework to account for different types of commonality problems.

Procedures for Calculating Residential Dehumidification Loads

Energy Technology Data Exchange (ETDEWEB)

Winkler, Jon [National Renewable Energy Lab. (NREL), Golden, CO (United States); Booten, Chuck [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-06-01

Residential building codes and voluntary labeling programs are continually increasing the energy efficiency requirements of residential buildings. Improving a building's thermal enclosure and installing energy-efficient appliances and lighting can result in significant reductions in sensible cooling loads leading to smaller air conditioners and shorter cooling seasons. However due to fresh air ventilation requirements and internal gains, latent cooling loads are not reduced by the same proportion. Thus, it's becoming more challenging for conventional cooling equipment to control indoor humidity at part-load cooling conditions and using conventional cooling equipment in a non-conventional building poses the potential risk of high indoor humidity. The objective of this project was to investigate the impact the chosen design condition has on the calculated part-load cooling moisture load, and compare calculated moisture loads and the required dehumidification capacity to whole-building simulations. Procedures for sizing whole-house supplemental dehumidification equipment have yet to be formalized; however minor modifications to current Air-Conditioner Contractors of America (ACCA) Manual J load calculation procedures are appropriate for calculating residential part-load cooling moisture loads. Though ASHRAE 1% DP design conditions are commonly used to determine the dehumidification requirements for commercial buildings, an appropriate DP design condition for residential buildings has not been investigated. Two methods for sizing supplemental dehumidification equipment were developed and tested. The first method closely followed Manual J cooling load calculations; whereas the second method made more conservative assumptions impacting both sensible and latent loads.

Fast H.264/AVC FRExt intra coding using belief propagation.

Science.gov (United States)

Milani, Simone

2011-01-01

In the H.264/AVC FRExt coder, the coding performance of Intra coding significantly overcomes the previous still image coding standards, like JPEG2000, thanks to a massive use of spatial prediction. Unfortunately, the adoption of an extensive set of predictors induces a significant increase of the computational complexity required by the rate-distortion optimization routine. The paper presents a complexity reduction strategy that aims at reducing the computational load of the Intra coding with a small loss in the compression performance. The proposed algorithm relies on selecting a reduced set of prediction modes according to their probabilities, which are estimated adopting a belief-propagation procedure. Experimental results show that the proposed method permits saving up to 60 % of the coding time required by an exhaustive rate-distortion optimization method with a negligible loss in performance. Moreover, it permits an accurate control of the computational complexity unlike other methods where the computational complexity depends upon the coded sequence.

Can Patients Comprehend the Educational Materials that Hospitals Provide about Common IR Procedures?

Science.gov (United States)

Sadigh, Gelareh; Hawkins, C Matthew; O'Keefe, John J; Khan, Ramsha; Duszak, Richard

2015-08-01

To assess the readability of online education materials offered by hospitals describing commonly performed interventional radiology (IR) procedures. Online patient education materials from 402 hospitals selected from the Medicare Hospital Compare database were assessed. The presence of an IR service was determined by representation in the Society of Interventional Radiology physician finder directory. Patient online education materials about (i) uterine artery embolization for fibroid tumors, (ii) liver cancer embolization, (iii) varicose vein treatment, (iv) central venous access, (v) inferior vena cava (IVC) filter placement, (vi) nephrostomy tube insertion, (vii) gastrostomy tube placement, and (viii) vertebral augmentation were targeted and assessed by using six validated readability scoring systems. Of 402 hospitals sampled, 156 (39%) were presumed to offer IR services. Of these, 119 (76%) offered online patient education material for one or more of the eight service lines. The average readability scores corresponding to grade varied between the ninth- and 12th-grade levels. All were higher than the recommended seventh-grade level (P Reading Ease scores ranged from 42 to 69, corresponding with fairly difficult to difficult readability for all service lines except IVC filter and gastrostomy tube placement, which corresponded with standard readability. A majority of hospitals offering IR services provide at least some online patient education material. Most, however, are written significantly above the reading comprehension level of most Americans. More attention to health literacy by hospitals and IR physicians is warranted. Copyright © 2015 SIR. Published by Elsevier Inc. All rights reserved.

Code of safety for nuclear merchant ships

International Nuclear Information System (INIS)

1982-01-01

The Code is in chapters, entitled: general (including general safety principles and principles of risk acceptance); design criteria and conditions; ship design, construction and equipment; nuclear steam supply system; machinery and electrical installations; radiation safety (including radiological protection design; protection of persons; dosimetry; radioactive waste management); operation (including emergency operation procedures); surveys. Appendices cover: sinking velocity calculations; seaway loads depending on service periods; safety assessment; limiting dose-equivalent rates for different areas and spaces; quality assurance programme; application of single failure criterion. Initial application of the Code is restricted to conventional types of ships propelled by nuclear propulsion plants with pressurized light water type reactors. (U.K.)

Up-date of the BCG code library

International Nuclear Information System (INIS)

Caldeira, A.D.; Garcia, R.D.M.

1990-01-01

Procedures for generating an up-date material library for the BCG code were established. A new library was generated by processing ENDF/B-IV data with the 89-1 version of the LINEAR, RECENT and SIGMA1 programs. The effect of library change in the neutron spectrum and effective multiplication factor of a fast reactor cell was analized. During the course of this study, an error was detected in the BCG code. Although localized in a narrow energy range, the discrepancies in neutron spectrum caused by the error were large enough to yield a difference of about 1% in the effective multiplication factor of the test cell. (author)

Dependency Analysis Guidance Nordic/German Working Group on Common Cause Failure analysis. Phase 2, Development of Harmonized Approach and Applications for Common Cause Failure Quantification

Energy Technology Data Exchange (ETDEWEB)

Becker, Guenter; Johanson, Gunnar; Lindberg, Sandra; Vaurio, Jussi

2009-03-15

The Regulatory Code SSMFS 2008:1 of Swedish Radiation Safety Authority (SSM) includes requirements regarding the performance of probabilistic safety assessments (PSA), as well as PSA activities in general. Therefore, the follow-up of these activities is part of the inspection tasks of SSM. According to the SSMFS 2008:1, the safety analyses shall be based on a systematic identification and evaluation of such events, event sequences and other conditions which may lead to a radiological accident. The research report Nordic/German Working Group on Common cause Failure analysis. Phase 2 project report: Development of Harmonized Approach and Applications for Common Cause Failure Quantification has been developed under a contract with the Nordic PSA Group (NPSAG) and its German counterpart VGB, with the aim to create a common experience base for defence and analysis of dependent failures i.e. Common Cause Failures CCF. Phase 2 in this project if a deepened data analyses of CCF events and a demonstration on how the so called impact vectors can be constructed and on how CCF parameters are estimated. The word Guidance in the report title is used in order to indicate a common methodological guidance accepted by the NPSAG, based on current state of the art concerning the analysis of dependent failures and adapted to conditions relevant for Nordic sites. This will make it possible for the utilities to perform cost effective improvements and analyses. The report presents a common attempt by the authorities and the utilities to create a methodology and experience base for defence and analysis of dependent failures. The performed benchmark application has shown how important the interpretation of base data is to obtain robust CCF data and data analyses results. Good features were found in all benchmark approaches. The obtained experiences and approaches should now be used in harmonised procedures. A next step could be to develop and agree on event and formula driven impact vector

Dependency Analysis Guidance Nordic/German Working Group on Common Cause Failure analysis. Phase 2, Development of Harmonized Approach and Applications for Common Cause Failure Quantification

International Nuclear Information System (INIS)

Becker, Guenter; Johanson, Gunnar; Lindberg, Sandra; Vaurio, Jussi

2009-03-01

The Regulatory Code SSMFS 2008:1 of Swedish Radiation Safety Authority (SSM) includes requirements regarding the performance of probabilistic safety assessments (PSA), as well as PSA activities in general. Therefore, the follow-up of these activities is part of the inspection tasks of SSM. According to the SSMFS 2008:1, the safety analyses shall be based on a systematic identification and evaluation of such events, event sequences and other conditions which may lead to a radiological accident. The research report Nordic/German Working Group on Common cause Failure analysis. Phase 2 project report: Development of Harmonized Approach and Applications for Common Cause Failure Quantification has been developed under a contract with the Nordic PSA Group (NPSAG) and its German counterpart VGB, with the aim to create a common experience base for defence and analysis of dependent failures i.e. Common Cause Failures CCF. Phase 2 in this project if a deepened data analyses of CCF events and a demonstration on how the so called impact vectors can be constructed and on how CCF parameters are estimated. The word Guidance in the report title is used in order to indicate a common methodological guidance accepted by the NPSAG, based on current state of the art concerning the analysis of dependent failures and adapted to conditions relevant for Nordic sites. This will make it possible for the utilities to perform cost effective improvements and analyses. The report presents a common attempt by the authorities and the utilities to create a methodology and experience base for defence and analysis of dependent failures. The performed benchmark application has shown how important the interpretation of base data is to obtain robust CCF data and data analyses results. Good features were found in all benchmark approaches. The obtained experiences and approaches should now be used in harmonised procedures. A next step could be to develop and agree on event and formula driven impact vector

Dosskin code for radiological evaluation of skin radioactive contaminations

International Nuclear Information System (INIS)

Cornejo D, N.

1996-01-01

The conceptual procedure and computational features of the DOSSKIN code are shown. This code calculates, in a very interactive way, skin equivalent doses and radiological risk related to skin radioactive contaminations. The evaluation takes into account the contributions of contaminant daughter nuclides and backscattering of beta particles in any skin cover. DOSSKIN also allows to estimate the maximum time needed to decontaminate the affected zone, using, as input quantity, the limit value of skin equivalent dose considered by users. The comparison of the results obtained by the DOSSKIN code with those reported by different authors are showed. The differences of results are less than 30%. (authors). 4 refs., 3 fig., 1 tab

Improvement of Parallel Algorithm for MATRA Code

International Nuclear Information System (INIS)

Kim, Seong-Jin; Seo, Kyong-Won; Kwon, Hyouk; Hwang, Dae-Hyun

2014-01-01

The feasibility study to parallelize the MATRA code was conducted in KAERI early this year. As a result, a parallel algorithm for the MATRA code has been developed to decrease a considerably required computing time to solve a bigsize problem such as a whole core pin-by-pin problem of a general PWR reactor and to improve an overall performance of the multi-physics coupling calculations. It was shown that the performance of the MATRA code was greatly improved by implementing the parallel algorithm using MPI communication. For problems of a 1/8 core and whole core for SMART reactor, a speedup was evaluated as about 10 when the numbers of used processor were 25. However, it was also shown that the performance deteriorated as the axial node number increased. In this paper, the procedure of a communication between processors is optimized to improve the previous parallel algorithm.. To improve the performance deterioration of the parallelized MATRA code, the communication algorithm between processors was newly presented. It was shown that the speedup was improved and stable regardless of the axial node number

Intake Procedures in College Counseling Centers.

Science.gov (United States)

Pappas, James P.; And Others

Intake procedures is the common subject of four papers presented in this booklet. James P. Pappas discusses trends, a decision theory model, information and issues in his article "Intake Procedures in Counseling Centers--Trends and Theory." In the second article "The Utilization of Standardized Tests in Intake Procedures or 'Where's the Post…

The computer code SEURBNUK/EURDYN (release 1). Input and output specifications

International Nuclear Information System (INIS)

Smith, B.L.; Broadhouse, B.J.; Yerkess, A.

1986-05-01

SEURBNUK-2 is a two-dimensional, axisymmetric, Eulerian, finite difference containment code developed initially by AWRE Aldermaston, AEE Winfrith and JRC-Ispra, and more recently by AEEW, JRC and EIR Wuerenlingen. The numerical procedure adopted in SEURBNUK to solve the hydrodynamic equations is based on the semi-implicit ICE method which itself is an extension of the MAC algorithm. SEURBNUK has a finite difference thin shell treatment for vessels and internal structures of arbitrary shape and includes the effects of the compressibility of the fluid. Fluid flow through porous media and porous structures can also be accommodated. SEURBNUK/EURDYN is an extension of SEURBNUK-2 in which the finite difference thin shell treatment is replaced by a finite element calculation for both thin or thick structures. This has been achieved by coupling the finite element code EURDYN with SEURBNUK-2, allowing the use of conical shell elements and axisymmetric triangular elements. Within the code, the equations of motion for the structures are solved quite separately from those for the fluid, and the timestep for the fluid can be an integer multiple of that for the structures. The interaction of the structures with the fluid is then considered as a modification to the coefficients in the pressure equations, the modifications naturally depending on the behaviour of the structures within the fluid cell. The code is limited to dealing with a single fluid, the coolant, and the bubble and the cover gas are treated as cavities of uniform pressure calculated via appropriate pressure-volume-energy relationships. This manual describes the input data specifications needed for the execution of SEURBNUK/EURDYN calculations. After explaining the output facilities information is included to aid users to avoid some common pit-falls. (author)

Decay heat rates calculated using ORIGEN-S and CINDER10 with common data libraries

International Nuclear Information System (INIS)

Brady, M.C.; Hermann, O.W.; Beard, C.A.; Bohnhoff, W.J.; England, T.R.

1991-01-01

A set of two benchmark problems were proposed as part of an international comparison of decay heat codes. Problem specifications included explicit fission-yield, decay and capture data libraries to be used in the calculations. This paper describes the results obtained using these common data to perform the benchmark calculations with two popular depletion codes, ORIGEN-S and CINDER10. Short descriptions of the methods used by each of these codes are also presented. Results from other contributors to the international comparison are discussed briefly. This comparison of decay heat codes using common data libraries demonstrates that discrepant results in calculated decay heat rates are the result of differences in the nuclear data input to the codes and not the method of solution. 15 refs., 2 figs., 8 tabs

French RSE-M and RCC-MR code appendices for flaw analysis: Presentation of the fracture parameters calculation-Part V: Elements of validation

International Nuclear Information System (INIS)

Marie, S.; Chapuliot, S.; Kayser, Y.; Lacire, M.H.; Drubay, B.; Barthelet, B.; Le Delliou, P.; Rougier, V.; Naudin, C.; Gilles, P.; Triay, M.

2007-01-01

French nuclear codes include flaw assessment procedures: the RSE-M Code 'Rules for In-service Inspection of Nuclear Power Plant Components' and the RCC-MR code 'Design and Construction Rules for Mechanical Components of FBR Nuclear Islands and High Temperature Applications'. Development of analytical methods has been made for the last 10 years in the framework of a collaboration between CEA, EDF and AREVA-NP, and by R and D actions involving CEA and IRSN. These activities have led to a unification of the common methods of the two codes. The calculation of fracture mechanics parameters, in particular the stress intensity factor K I and the J integral, has been widely developed for industrial configurations. All the developments have been integrated in the 2005 edition of RSE-M and in 2007 edition of RCC-MR. This series of articles consists of 5 parts: the first part presents an overview of the methods proposed in the RCC-MR and RSE-M codes. Parts II-IV provide the compendia for specific components. The geometries are plates (part II), pipes (part III) and elbows (part IV). This part presents validation of the methods, with details on the process followed for their development and of the evaluation accuracy of the proposed analytical methods

Reaction path of energetic materials using THOR code

Science.gov (United States)

Durães, L.; Campos, J.; Portugal, A.

1998-07-01

The method of predicting reaction path, using THOR code, allows for isobar and isochor adiabatic combustion and CJ detonation regimes, the calculation of the composition and thermodynamic properties of reaction products of energetic materials. THOR code assumes the thermodynamic equilibria of all possible products, for the minimum Gibbs free energy, using HL EoS. The code allows the possibility of estimating various sets of reaction products, obtained successively by the decomposition of the original reacting compound, as a function of the released energy. Two case studies of thermal decomposition procedure were selected, calculated and discussed—pure Ammonium Nitrate and its based explosive ANFO, and Nitromethane—because their equivalence ratio is respectively lower, near and greater than the stoicheiometry. Predictions of reaction path are in good correlation with experimental values, proving the validity of proposed method.

Code of safe practice for the use of x-rays in podiatry

International Nuclear Information System (INIS)

1990-02-01

The purpose of this code which applies to podiatric diagnostic use of x-rays is to provide criteria for working procedures, x-ray equipment and protective materials necessary for the use of x-rays in podiatric diagnosis according to currently accepted standards of safety. Conformity with this code may be taken as a primary indication of compliance with radiation protection legislation. 5 refs

Real-time minimal-bit-error probability decoding of convolutional codes

Science.gov (United States)

Lee, L.-N.

1974-01-01

A recursive procedure is derived for decoding of rate R = 1/n binary convolutional codes which minimizes the probability of the individual decoding decisions for each information bit, subject to the constraint that the decoding delay be limited to Delta branches. This new decoding algorithm is similar to, but somewhat more complex than, the Viterbi decoding algorithm. A real-time, i.e., fixed decoding delay, version of the Viterbi algorithm is also developed and used for comparison to the new algorithm on simulated channels. It is shown that the new algorithm offers advantages over Viterbi decoding in soft-decision applications, such as in the inner coding system for concatenated coding.

Real-time minimal bit error probability decoding of convolutional codes

Science.gov (United States)

Lee, L. N.

1973-01-01

A recursive procedure is derived for decoding of rate R=1/n binary convolutional codes which minimizes the probability of the individual decoding decisions for each information bit subject to the constraint that the decoding delay be limited to Delta branches. This new decoding algorithm is similar to, but somewhat more complex than, the Viterbi decoding algorithm. A real-time, i.e. fixed decoding delay, version of the Viterbi algorithm is also developed and used for comparison to the new algorithm on simulated channels. It is shown that the new algorithm offers advantages over Viterbi decoding in soft-decision applications such as in the inner coding system for concatenated coding.

DART: a simulation code for charged particle beams

International Nuclear Information System (INIS)

White, R.C.; Barr, W.L.; Moir, R.W.

1988-01-01

This paper presents a recently modified verion of the 2-D DART code designed to simulate the behavior of a beam of charged particles whose paths are affected by electric and magnetic fields. This code was originally used to design laboratory-scale and full-scale beam direct converters. Since then, its utility has been expanded to allow more general applications. The simulation technique includes space charge, secondary electron effects, and neutral gas ionization. Calculations of electrode placement and energy conversion efficiency are described. Basic operation procedures are given including sample input files and output. 7 refs., 18 figs

Sparsity in Linear Predictive Coding of Speech

DEFF Research Database (Denmark)

Giacobello, Daniele

of the effectiveness of their application in audio processing. The second part of the thesis deals with introducing sparsity directly in the linear prediction analysis-by-synthesis (LPAS) speech coding paradigm. We first propose a novel near-optimal method to look for a sparse approximate excitation using a compressed...... one with direct applications to coding but also consistent with the speech production model of voiced speech, where the excitation of the all-pole filter can be modeled as an impulse train, i.e., a sparse sequence. Introducing sparsity in the LP framework will also bring to de- velop the concept...... sensing formulation. Furthermore, we define a novel re-estimation procedure to adapt the predictor coefficients to the given sparse excitation, balancing the two representations in the context of speech coding. Finally, the advantages of the compact parametric representation of a segment of speech, given...

Fast Erasure and Error decoding of Algebraic Geometry Codes up to the Feng-Rao Bound

DEFF Research Database (Denmark)

Jensen, Helge Elbrønd; Sakata, S.; Leonard, D.

1996-01-01

This paper gives an errata(that is erasure-and error-) decoding algorithm of one-point algebraic geometry codes up to the Feng-Rao designed minimum distance using Sakata's multidimensional generalization of the Berlekamp-massey algorithm and the votin procedure of Feng and Rao.......This paper gives an errata(that is erasure-and error-) decoding algorithm of one-point algebraic geometry codes up to the Feng-Rao designed minimum distance using Sakata's multidimensional generalization of the Berlekamp-massey algorithm and the votin procedure of Feng and Rao....

From concatenated codes to graph codes

DEFF Research Database (Denmark)

Justesen, Jørn; Høholdt, Tom

2004-01-01

We consider codes based on simple bipartite expander graphs. These codes may be seen as the first step leading from product type concatenated codes to more complex graph codes. We emphasize constructions of specific codes of realistic lengths, and study the details of decoding by message passing...

Open Code - Open Content - Open Law. Building a Digital Commons

Science.gov (United States)

1999-06-21

PERFORMING ORGANIZATION REPORT NUMBER IATAC Information Assurance Technology Analysis Center 3190 Fairview Park Drive Falls Church VA 22042 9... Internet live up to its possibilities. Need institutions to facilitate participation. -Nolan Bowie: Need to assure that information gets into the...particular markets . -Tamar Frankel: Loss of some of commons as a result of technological change. Need to create a new institutional struc- ture to restore

Visualization of Instrumental Verification Information Details (VIVID) : code development, description, and usage.

Energy Technology Data Exchange (ETDEWEB)

Roy, Christopher John; Bainbridge, Bruce L.; Potter, Donald L.; Blottner, Frederick G.; Black, Amalia Rebecca

2005-03-01

The formulation, implementation and usage of a numerical solution verification code is described. This code uses the Richardson extrapolation procedure to estimate the order of accuracy and error of a computational program solution. It evaluates multiple solutions performed in numerical grid convergence studies to verify a numerical algorithm implementation. Analyses are performed on both structured and unstructured grid codes. Finite volume and finite element discretization programs are examined. Two and three-dimensional solutions are evaluated. Steady state and transient solution analysis capabilities are present in the verification code. Multiple input data bases are accepted. Benchmark options are included to allow for minimal solution validation capability as well as verification.

Development of chemical equilibrium analysis code 'CHEEQ'

International Nuclear Information System (INIS)

Nagai, Shuichiro

2006-08-01

'CHEEQ' code which calculates the partial pressure and the mass of the system consisting of ideal gas and pure condensed phase compounds, was developed. Characteristics of 'CHEEQ' code are as follows. All the chemical equilibrium equations were described by the formation reactions from the mono-atomic gases in order to simplify the code structure and input preparation. Chemical equilibrium conditions, Σν i μ i =0 for the gaseous compounds and precipitated condensed phase compounds and Σν i μ i > 0 for the non-precipitated condensed phase compounds, were applied. Where, ν i and μ i are stoichiometric coefficient and chemical potential of component i. Virtual solid model was introduced to perform the calculation of constant partial pressure condition. 'CHEEQ' was consisted of following 3 parts, (1) analysis code, zc132. f. (2) thermodynamic data base, zmdb01 and (3) input data file, zindb. 'CHEEQ' code can calculate the system which consisted of elements (max.20), condensed phase compounds (max.100) and gaseous compounds. (max.200). Thermodynamic data base, zmdb01 contains about 1000 elements and compounds, and 200 of them were Actinide elements and their compounds. This report describes the basic equations, the outline of the solution procedure and instructions to prepare the input data and to evaluate the calculation results. (author)

Time-to-code converter with selection of time intervals on duration

International Nuclear Information System (INIS)

Atanasov, I.Kh.; Rusanov, I.R.; )

2001-01-01

Identification of elementary particles on the basis of time-of-flight represents the important approach of the preliminary selection procedure. Paper describes a time-to-code converter with preliminary selection of the measured time intervals as to duration. It consists of a time-to-amplitude converter, an analog-to-digital converter, a unit of selection of time intervals as to duration, a unit of total reset and CAMAC command decoder. The time-to-code converter enables to measure time intervals with 100 ns accuracy within 0-100 ns range. Output code capacity is of 10. Selection time constitutes 50 ns [ru

2-Step scalar deadzone quantization for bitplane image coding.

Science.gov (United States)

Auli-Llinas, Francesc

2013-12-01

Modern lossy image coding systems generate a quality progressive codestream that, truncated at increasing rates, produces an image with decreasing distortion. Quality progressivity is commonly provided by an embedded quantizer that employs uniform scalar deadzone quantization (USDQ) together with a bitplane coding strategy. This paper introduces a 2-step scalar deadzone quantization (2SDQ) scheme that achieves same coding performance as that of USDQ while reducing the coding passes and the emitted symbols of the bitplane coding engine. This serves to reduce the computational costs of the codec and/or to code high dynamic range images. The main insights behind 2SDQ are the use of two quantization step sizes that approximate wavelet coefficients with more or less precision depending on their density, and a rate-distortion optimization technique that adjusts the distortion decreases produced when coding 2SDQ indexes. The integration of 2SDQ in current codecs is straightforward. The applicability and efficiency of 2SDQ are demonstrated within the framework of JPEG2000.

Patient radiation doses in the most common interventional cardiology procedures in croatia: First results

International Nuclear Information System (INIS)

Brnic, Z.; Krpan, T.; Faj, D.; Kubelka, D.; Ramac, J. P.; Posedel, D.; Steiner, R.; Vidjak, V.; Brnic, V.; Viskovic, K.; Baraban, V.

2010-01-01

Apart from its benefits, the interventional cardiology (IC) is known to generate high radiation doses to patients and medical staff involved. The European Union Medical Exposures Directive 97/43/EURATOM strongly recommend patient dosimetry in interventional radiology, including IC. IC patient radiation doses in four representative IC rooms in Croatia were investigated. Setting reference levels for these procedures have difficulties due to the large difference in procedure complexity. Nevertheless, it is important that some guideline values are available as a benchmark to guide the operators during these potentially high-dose procedures. Local and national diagnostic reference levels (DRLs) were proposed as a guidance. A total of 138 diagnostic (coronary angiography, CA) and 151 therapeutic (PTCA, stenting) procedures were included. Patient irradiation was measured in terms of kerma-area product (KAP), fluoroscopy time (FT) and number of cine-frames (F). KAP was recorded using calibrated KAP-meters. DRLs of KAP, FT and F were calculated as third quartile values rounded up to the integer. Skin doses were assessed on a selected sample of high skin dose procedures, using radiochromic films, and peak skin doses (PSD) were presented. A relative large range of doses in IC was detected. National DRLs were proposed as follows: 32 Gy cm 2 , 6.6 min and 610 frames for CA and 72 Gy cm 2 , 19 min and 1270 frames for PTCA. PSD 2 Gy in 8% of selected patients. Measuring the patient doses in radiological procedures is required by law, but rarely implemented in Croatia. The doses recorded in the study are acceptable when compared with the literature, but optimisation is possible. The preliminary DRL values proposed may be used as a guideline for local departments, and should be a basis for radiation reduction measures and quality assurance programmes in IC in Croatia. (authors)

Final Technical Report: Hydrogen Codes and Standards Outreach

Energy Technology Data Exchange (ETDEWEB)

Hall, Karen I.

2007-05-12

This project contributed significantly to the development of new codes and standards, both domestically and internationally. The NHA collaborated with codes and standards development organizations to identify technical areas of expertise that would be required to produce the codes and standards that industry and DOE felt were required to facilitate commercialization of hydrogen and fuel cell technologies and infrastructure. NHA staff participated directly in technical committees and working groups where issues could be discussed with the appropriate industry groups. In other cases, the NHA recommended specific industry experts to serve on technical committees and working groups where the need for this specific industry expertise would be on-going, and where this approach was likely to contribute to timely completion of the effort. The project also facilitated dialog between codes and standards development organizations, hydrogen and fuel cell experts, the government and national labs, researchers, code officials, industry associations, as well as the public regarding the timeframes for needed codes and standards, industry consensus on technical issues, procedures for implementing changes, and general principles of hydrogen safety. The project facilitated hands-on learning, as participants in several NHA workshops and technical meetings were able to experience hydrogen vehicles, witness hydrogen refueling demonstrations, see metal hydride storage cartridges in operation, and view other hydrogen energy products.

3D Scan-Based Wavelet Transform and Quality Control for Video Coding

Directory of Open Access Journals (Sweden)

Parisot Christophe

2003-01-01

Full Text Available Wavelet coding has been shown to achieve better compression than DCT coding and moreover allows scalability. 2D DWT can be easily extended to 3D and thus applied to video coding. However, 3D subband coding of video suffers from two drawbacks. The first is the amount of memory required for coding large 3D blocks; the second is the lack of temporal quality due to the sequence temporal splitting. In fact, 3D block-based video coders produce jerks. They appear at blocks temporal borders during video playback. In this paper, we propose a new temporal scan-based wavelet transform method for video coding combining the advantages of wavelet coding (performance, scalability with acceptable reduced memory requirements, no additional CPU complexity, and avoiding jerks. We also propose an efficient quality allocation procedure to ensure a constant quality over time.

MARS CODE MANAUAL VOLUME IV - Developmental Assessment Report

International Nuclear Information System (INIS)

Chung, Bub Dong; Jeong, Jae Jun; Hwang, Moon Kyu; Lee, Won Jae; Lee, Young Jin; Lee, Seung Wook; Kim, Kyung Doo; Bae, Sung Won

2010-02-01

Korea Advanced Energy Research Institute (KAERI) conceived and started the development of MARS code with the main objective of producing a state-of-the-art realistic thermal hydraulic systems analysis code with multi-dimensional analysis capability. MARS achieves this objective by very tightly integrating the one dimensional RELAP5/MOD3 with the multi-dimensional COBRA-TF codes. The method of integration of the two codes is based on the dynamic link library techniques, and the system pressure equation matrices of both codes are implicitly integrated and solved simultaneously. In addition, the Equation-Of-State (EOS) for the light water was unified by replacing the EOS of COBRA-TF by that of the RELAP5. This assessment manual provides a complete list of code assessment results of the MARS code for various conceptual problem, separate effect test and integral effect test. From these validation procedures, the soundness and accuracy of the MARS code has been confirmed. The overall structure of the input is modeled on the structure of the RELAP5 and as such the layout of the manual is very similar to that of the RELAP. This similitude to RELAP5 input is intentional as this input scheme will allow minimum modification between the inputs of RELAP5 and MARS3.1. MARS3.1 development team would like to express its appreciation to the RELAP5 Development Team and the USNRC for making this manual possible

Continuous Non-malleable Codes

DEFF Research Database (Denmark)

Faust, Sebastian; Mukherjee, Pratyay; Nielsen, Jesper Buus

2014-01-01

or modify it to the encoding of a completely unrelated value. This paper introduces an extension of the standard non-malleability security notion - so-called continuous non-malleability - where we allow the adversary to tamper continuously with an encoding. This is in contrast to the standard notion of non...... is necessary to achieve continuous non-malleability in the split-state model. Moreover, we illustrate that none of the existing constructions satisfies our uniqueness property and hence is not secure in the continuous setting. We construct a split-state code satisfying continuous non-malleability. Our scheme...... is based on the inner product function, collision-resistant hashing and non-interactive zero-knowledge proofs of knowledge and requires an untamperable common reference string. We apply continuous non-malleable codes to protect arbitrary cryptographic primitives against tampering attacks. Previous...

Screening and association testing of common coding variation in steroid hormone receptor co-activator and co-repressor genes in relation to breast cancer risk: the Multiethnic Cohort

Directory of Open Access Journals (Sweden)

Stallcup Michael R

2009-01-01

studies. Conclusion Our findings suggest that common coding variation in these candidate genes do not make a substantial contribution to breast cancer risk in the general population. Cataloging and testing of coding variants in coactivator and corepressor genes should continue and may serve as a valuable resource for investigations of other hormone-related phenotypes, such as inter-individual response to hormonal therapies used for cancer treatment and prevention.

Screening and association testing of common coding variation in steroid hormone receptor co-activator and co-repressor genes in relation to breast cancer risk: the Multiethnic Cohort

International Nuclear Information System (INIS)

Haiman, Christopher A; Stallcup, Michael R; Greene, Geoffrey L; Press, Michael F; Garcia, Rachel R; Hsu, Chris; Xia, Lucy; Ha, Helen; Sheng, Xin; Le Marchand, Loic; Kolonel, Laurence N; Henderson, Brian E

2009-01-01

Only a limited number of studies have performed comprehensive investigations of coding variation in relation to breast cancer risk. Given the established role of estrogens in breast cancer, we hypothesized that coding variation in steroid receptor coactivator and corepressor genes may alter inter-individual response to estrogen and serve as markers of breast cancer risk. We sequenced the coding exons of 17 genes (EP300, CCND1, NME1, NCOA1, NCOA2, NCOA3, SMARCA4, SMARCA2, CARM1, FOXA1, MPG, NCOR1, NCOR2, CALCOCO1, PRMT1, PPARBP and CREBBP) suggested to influence transcriptional activation by steroid hormone receptors in a multiethnic panel of women with advanced breast cancer (n = 95): African Americans, Latinos, Japanese, Native Hawaiians and European Americans. Association testing of validated coding variants was conducted in a breast cancer case-control study (1,612 invasive cases and 1,961 controls) nested in the Multiethnic Cohort. We used logistic regression to estimate odds ratios for allelic effects in ethnic-pooled analyses as well as in subgroups defined by disease stage and steroid hormone receptor status. We also investigated effect modification by established breast cancer risk factors that are associated with steroid hormone exposure. We identified 45 coding variants with frequencies ≥ 1% in any one ethnic group (43 non-synonymous variants). We observed nominally significant positive associations with two coding variants in ethnic-pooled analyses (NCOR2: His52Arg, OR = 1.79; 95% CI, 1.05–3.05; CALCOCO1: Arg12His, OR = 2.29; 95% CI, 1.00–5.26). A small number of variants were associated with risk in disease subgroup analyses and we observed no strong evidence of effect modification by breast cancer risk factors. Based on the large number of statistical tests conducted in this study, the nominally significant associations that we observed may be due to chance, and will need to be confirmed in other studies. Our findings suggest that common coding

Abiding by codes of ethics and codes of conduct imposed on members of learned and professional geoscience institutions and - a tiresome formality or a win-win for scientific and professional integrity and protection of the public?

Science.gov (United States)

Allington, Ruth; Fernandez, Isabel

2015-04-01

sustainability. This contribution is part of a series of presentations and papers by TG-GGP members in 2015 on a similar theme, including a paper submitted for the American Geophysical Union Joint Assembly meeting in Montreal, Canada, in May 2015 (Bonham and Allington). It will first describe common features of ethical codes/codes of conduct and associated complaints and disciplinary procedures, drawing on examples from the professional geoscience organisations which are members of TG-GGP. It will go on to examine the challenges associated with encouraging and policing compliance with such codes, especially where the need for compliance is not a legal obligation, but simply a condition of membership of that organisation.

Coding chaotic billiards: I-Non-Compact billiards on a negative curvature manifold

International Nuclear Information System (INIS)

Giannoni, M.J.; Ullmo, D.

1989-03-01

This paper presents a method for coding billiards. The main device is to use a proper surface of section, the bounce mapping, and foliate the reduced phase space into regions associated with a given code. The alphabet is merely the ensemble of the labels of the sides of the billiard. The procedure is applied here to non-compact polygonal billiard defined on a manifold of constant negative curvature, with all vertices at infinity. A simple grammar rule is necessary and sufficient to insure existence and uniqueness of the coding

Operational procedures - industry observations and opportunities for improvement

International Nuclear Information System (INIS)

Davey, E.

2003-01-01

The purpose of this paper is to relate some of the commonly encountered problems with operational procedures in the nuclear industry and offer practical suggestions for their elimination. The paper is based on recent consultant experience in assisting industry clients with human performance related design and assessment initiatives. Operational procedures are a key part of an integrated system design. Procedures provide the specified instructions for actions people are to undertake in operating a facility to achieve production and safety goals. While organizations continue to make substantial investments in procedure development and maintenance, problems with procedures continue to occur, as evidenced through operating inefficiencies, errors, and events. The paper reviews the role procedures play in facility operations, comments on current development and maintenance practices, discusses the extent of human performance related problems attributed to procedure deficiencies, reviews commonly encountered problems with design and implementation of procedures, and offers suggestions on how some of these issues might be addressed in the future. (author)

Reviewing the College Disciplinary Procedure. Mendip Papers.

Science.gov (United States)

Kedney, R. J.; Saunders, R.

This paper provides practical advice on reviewing and designing disciplinary procedures and is set in the context of incorporation of further education and sixth form colleges in England. Reasons are provided for having disciplinary rules, based on the Advisory Conciliation and Arbitration Service's (ACAS) Code of Practice. Relevant English…

Common QA/QM Criteria for Multinational Vendor Inspection

International Nuclear Information System (INIS)

2014-01-01

This VICWG document provides the 'Common QA/QM Criteria' which will be used in Multinational Vendor Inspection. The 'Common QA/QM Criteria' provides the basic consideration when performing the Vendor Inspection. These criteria has been developed in conformity with International Codes and Standards such as IAEA, ISO and so on that MDEP member countries adopted. The purpose of the VICWG is to establish areas of co-operation in the Vendor Inspection practices among MDEP member countries as described in the MDEP issue-specific Terms of Reference (ToR). As part of this, from the beginning, a survey was performed to understand and to identify areas of commonality and differences between regulatory practices of member countries in the area of vendor inspection. The VICWG also collaborated by performing Witnessed Inspections and Joint Inspections. Through these activities, it was recognized that member countries commonly apply the IAEA safety standard (GS-R-3) to the vendor inspection criteria, and almost ail European member countries apply the ISO standard (ISO9001). In the US, the NRC regulatory requirement in 10 CFR, Part 50, Appendix B is used. South Korea uses the same criteria as in the US. As a result of the information obtained, a comparison table between codes and standards (IAEAGS-R-3, ISO 9001:2008.10CFR50 Appendix Band ASME NQA-1) has been developed in order to inform the development of 'Common QA/QM Criteria'. The result is documented in Table 1, 'MDEP CORE QA/QM Requirement and Comparison between Codes and Standards'. In addition, each country's criteria were compared with the US 10CFR50 Appendix B as a template. Table 2 shows VICWG Survey on Quality Assurance Program Requirements. Through these activities above, we considered that the core requirements should be consistent with both IAEA safety standard and ISO standard, and considered that the common requirements in the US 10CFR50 Appendix B used to the survey

Iterative code for the reconstruction of the neutrons spectrum using the Bonner spheres

International Nuclear Information System (INIS)

Reyes H, A.; Ortiz R, J. M.; Vega C, H. R.

2012-10-01

The neutrons are the particles more difficult of detecting for their intrinsic nature. The absence of the neutrons charge makes that an interaction exists with the matter in a different way. The term radiation spectrometry can use to describe the measurement of the intensity of a radiation field with regard to the energy. The intensity distribution with relationship to the energy is commonly known as spectrum. A method to know the neutrons spectrum in the radiation fields to those that people are exposed is the use of the known system as spectrometry system of Bonner spheres, being the more used for the purposes of the radiological protection. The current interest in the electrons spectrometry has stimulated the development of several procedures to carry out the reconstruction of the spectra. During the last decades new codes have been developed such as BUNKIUT, Bums, Fruit, UMG, etc., however, these methods still present several inconveniences as the complexity in their use, the necessity of an expert user and a very near initial spectrum to the spectrum that is wanted to obtain. To solve the mentioned problems it was development the program NSDUAZ (Neutron Spectrometry and Dosimetry from Autonomous University of Zacatecas). The objective of the present work is to prove and to validate the code before mentioned making an analysis of likeness and differences and of advantages and disadvantages with relationship to the codes used at the present time. (Author)

Code of safe practice for the use of x-rays in dentistry

International Nuclear Information System (INIS)

1991-06-01

The purpose of this Code of Safe Practice for the Use of X-rays in Dentistry is to provide criteria for working procedures, x-ray equipment and protective materials necessary for the use of x-rays in dental diagnosis according to currently accepted standards of safety. Conformity with this code may be taken as a primary indication of compliance with radiation protection legislation. 7 refs., 1 ill

Development and validation of GWHEAD, a three-dimensional groundwater head computer code

International Nuclear Information System (INIS)

Beckmeyer, R.R.; Root, R.W.; Routt, K.R.

1980-03-01

A computer code has been developed to solve the groundwater flow equation in three dimensions. The code has finite-difference approximations solved by the strongly implicit solution procedure. Input parameters to the code include hydraulic conductivity, specific storage, porosity, accretion (recharge), and initial hydralic head. These parameters may be input as varying spatially. The hydraulic conductivity may be input as isotropic or anisotropic. The boundaries either may permit flow across them or may be impermeable. The code has been used to model leaky confined groundwater conditions and spherical flow to a continuous point sink, both of which have exact analytical solutions. The results generated by the computer code compare well with those of the analytical solutions. The code was designed to be used to model groundwater flow beneath fuel reprocessing and waste storage areas at the Savannah River Plant

Experimental implementation of the Bacon-Shor code with 10 entangled photons

Science.gov (United States)

Gimeno-Segovia, Mercedes; Sanders, Barry C.

The number of qubits that can be effectively controlled in quantum experiments is growing, reaching a regime where small quantum error-correcting codes can be tested. The Bacon-Shor code is a simple quantum code that protects against the effect of an arbitrary single-qubit error. In this work, we propose an experimental implementation of said code in a post-selected linear optical setup, similar to the recently reported 10-photon GHZ generation experiment. In the procedure we propose, an arbitrary state is encoded into the protected Shor code subspace, and after undergoing a controlled single-qubit error, is successfully decoded. BCS appreciates financial support from Alberta Innovates, NSERC, China's 1000 Talent Plan and the Institute for Quantum Information and Matter, which is an NSF Physics Frontiers Center(NSF Grant PHY-1125565) with support of the Moore Foundation(GBMF-2644).

Systems guide to MCNP (Monte Carlo Neutron and Photon Transport Code)

International Nuclear Information System (INIS)

Kirk, B.L.; West, J.T.

1984-06-01

The subject of this report is the implementation of the Los Alamos National Laboratory Monte Carlo Neutron and Photon Transport Code - Version 3 (MCNP) on the different types of computer systems, especially the IBM MVS system. The report supplements the documentation of the RSIC computer code package CCC-200/MCNP. Details of the procedure to follow in executing MCNP on the IBM computers, either in batch mode or interactive mode, are provided

Mechanical modelling of PCI with FRAGEMA and CEA finite element codes

International Nuclear Information System (INIS)

Joseph, J.; Bernard, Ph.; Atabek, R.; Chantant, M.

1983-01-01

In the framework of their common program, CEA and FRAGEMA have undertaken the mechanical modelization of PCI. In the first step two different codes, TITUS and VERDON, have been tested by FRAGEMA and CEA respectively. Whereas the two codes use a finite element method to describe the thermomechanical behaviour of a fuel element, input models are not the same for the two codes: to take into account the presence of cracks in UO 2 , an axisymmetric two dimensional mesh pattern and the Druecker-Prager criterion are used in VERDON and a 3D equivalent method in TITUS. Two rods have been studied with these two methods: PRISCA 04bis and PRISCA 104 which were ramped in SILOE. The results show that the stresses and strains are the same with the two codes. These methods are further applied to the complete series of the common ramp test rods program of FRAGEMA and CEA. (author)

Design of Packet-Based Block Codes with Shift Operators

Directory of Open Access Journals (Sweden)