WorldWideScience

Sample records for combustibles des piles

  1. Les piles à combustible. Bilan des travaux de recherches. Perspectives Fuel Cells. Review of Research. Outlook

    Directory of Open Access Journals (Sweden)

    Breelle Y.

    2006-11-01

    Full Text Available Cet article fait le point, sous forme résumée, des travaux de recherches et de développement menés par l'Institut Français du Pétrole (IFP depuis vingt ans dans le domaine des piles à combustible : sélection des filières directes conduisant au choix de la pile hydrogène-air basse température à électrolyte basique, mise au point des générateurs à hydrogène alimentés en méthanol. On présente les résultats obtenus et les conclusions des enquêtes effectués dans le domaine des groupes électrogènes et des applications spéciales, dans celui de la traction automobile et dans celui de la production massive d'électricité. This article reviews and sums up the research and development done by Institut Français du Pétrole (IFP in the last 20 years in the field of fuel cells, including the selection of direct methods leading to the choice of low-temperature basic-electrolyte hydrogen/air cells and the development of methanol-powered hydrogen generators. The results obtained are desceibed along with the conclusions of surveys made in the field of electric generators and special applications in the fields of automotive traction and massive electricity production.

  2. Apparatus for examination of irradiated fuel elements of industrial reactors at Marcoule; Appareillage d'examen des elements combustibles des piles industrielles de Marcoule

    Energy Technology Data Exchange (ETDEWEB)

    Pesenti, P; Wallet, Ph [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The authors describe a viewing and measurement cell for the slugs of Marcoule industrial reactors. This cell allows visual inspection, and photography of slugs. Length measurements are also made possible by horizontal motion of the slug both in translation and rotation. (author) [French] Les auteurs decrivent une cellule d'observation et de mesure des elements combustibles des piles industrielles de Marcoule. La cellule permet l'examen a vue, la photographie, la radioscopie et la radiographie des elements combustibles. Elle permet en outre la mesure de longueurs sur ces elements, ces derniers pouvant etre deplaces horizontalement en translation, et en rotation. (auteur)

  3. Fuel elements for pressurised-gas reactors; Elements combustibles des piles a gaz sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Stohr, J A; Englander, M; Gauthron, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The design and fabrication of fuel elements for the first CO{sub 2} pressurized reactors have induced to investigate: various cladding materials, natural uranium base fuels, canning processes. The main analogical tests used in connection with the fuel element study are described. These various tests have enabled, among others, the fabrication of the fuel element for the EL2 reactor. Lastly, future solutions for electrical power producing reactors are foreseen. (author)Fren. [French] L'etude et la realisation d'elements combustibles pour les premieres piles a CO{sub 2} sous pression ont conduit a examiner: les divers materiaux de gaine, les combustibles a base d'uranium naturel, les modes de gainage. Les principaux essais analogiques ayant servi au cours de l'etude de la cartouche sont decrits. Ces divers essais ont notamment permis la realisation de la cartouche de la pile EL2. Enfin sont envisagees les solutions futures pour les piles productrices d'energie electrique. (auteur)

  4. Study of a device for the direct measurement of the fission gas pressure inside an in-pile fuel element; Etude d'un dispositif pour la mesure directe de la pression des gaz de fission a l'interieur d'un element combustible en pile

    Energy Technology Data Exchange (ETDEWEB)

    Lavaud, B; Uschanoff, S [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The fission gas pressure inside a fuel element made of a refractory fuel constitutes an important limiting factor for the burn-up. Although it is possible to calculate approximately the volume of gas produced outside the fuel during its life-time; it is nevertheless very difficult to evaluate the pressure since the volume allowed to the fission gases, as well as their temperature are known only very approximately. This physical value, which is essential for the technologist, can only be known by direct in-pile measurement of the pressure. The report describes the equipment which has been developed for this test. (authors) [French] La pression des gaz de fission a l'interieur d'un element combustible a combustible refractaire constitue une des limitations importantes du taux de combustion. Si on peut approcher par calcul la determination du volume, des gaz degages hors du combustible au cours de sa vie, il est par contre tres difficile d'evaluer la pression car le volume alloue aux gaz de fission et leur temperature sont tres mal connus. Cette donnee essentielle pour le technologue ne peut etre atteinte que par une mesure directe en pile de la pression. Le rapport decrit l'appareillage qui a ete mis au point pour cet essai. (auteurs)

  5. Graphite reactor physics; Physique des piles a graphite

    Energy Technology Data Exchange (ETDEWEB)

    Bacher, P; Cogne, F [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Noc, B [Electricite de France (EDF), 75 - Paris (France)

    1964-07-01

    physique des piles de puissance a graphite et uranium naturel se poursuit depuis parallelement au developpement de ce type de piles. L'etude systematique des proprietes des reseaux en fonction du pas, de la geometrie du combustible et du diametre des canaux de refroidissement a pu etre entreprise a partir de 1960 grace a l'empilement critique MARIUS. Cette etude a permis de couvrir un domaine tres etendu: pas variant de 19 a 38 cm, barreaux et tubes d'uranium dont les sections droites vont de 6 a 35 cm{sup 2}, canaux dont le diametre est compris entre 70 et 140 mm. On a pu ainsi verifier, et au besoin adapter, les methodes de calcul de reseaux. Le fonctionnement des piles de Marcoule, ainsi que les experiences effectuees sur ces piles au cours des dernieres annees, ont apporte des renseignements precieux sur l'evolution globale des proprietes neutroniques du combustible en fonction de l'irradiation. Des experiences plus precises ont egalement ete faites dans MARIUS avec des combustibles contenant du plutonium (combustibles irradiee ou reconstitues), et seront entreprises des le debut 1965 en temperature dans l'empilement critique CESAR, dont la construction s'acheve a Cadarache. Les analyses des combustibles irradies permettent de completer ces resultats et de faciliter leur interpretation. Il sera ainsi possible de verifier dans tout le domaine utile de temperature les theories de thermalisation et de spectres developpees en France. L'efficacite de barres de controle en fonction de leurs dimensions, des materiaux les constituant, et des reseaux les environnant a ete mesuree dans MARIUS, et les resultats ont ete confrontes d'une part avec le calcul, d'autre part avec les mesures effectuees dans EDF 1. Les etudes du controle proprement dit des piles a graphite ont porte essentiellement sur les risques d'instabilites spatiales, et sur les moyens de les deceler et de les combattre, ainsi que sur les deformations du flux provoquees par les barres de controle. (auteurs)

  6. Experimental apparatus for in-pile studies of: creep of nuclear fuels, and Young's-modulus of structural materials; Dispositifs experimentaux pour etudes en pile du fluage des materiaux combustibles, et du module d'elasticite des materiaux de structure

    Energy Technology Data Exchange (ETDEWEB)

    Gautier, A; Le Bret, P; Alfille, L; Pesenti, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Creep test under compression: the apparatus described allows to study, in an horizontal beam hole of a research reactor such as EL2, the creep behaviour of nuclear fuel samples under neutron flux. The maximum stress applied on the specimens is a constant compression chooses between 0.200 and 0.400 kg/mm{sup 2} (285 psi and 570 psi). - Young's Modulus measurement: in another horizontal beam hole of such a reactor, an apparatus allows to study the irradiation effect on Young's Modulus of a structural material specimen. (author)Fren. [French] Essai de fluage en compression: l'appareillage decrit permet d'etudier, dans un canal horizontal d'une pile experimentale type EL2, le fluage en compression d'eprouvettes de materiaux fissiles sous le flux de neutrons, sous une contrainte maximum de 500 g/mm{sup 2}. - Mesure du module d'Young: dans un canal identique au precedent, un appareillage permet de suivre l'influence du rayonnement sur le module d'elasticite d'une eprouvette d'un materiau de structure. (auteur)

  7. Safety precautions in atomic pile control (1962); Securite dans le controle des piles atomiques (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Furet, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    We have been led to study the problem of safety in atomic pile control as a result of our participation on the one hand in the planning of C.E.A. atomic piles, and on the other hand in the pile safety sub omission considering atomic pile safety of operational or planned C.E.A. piles. We have thus had to consider the wishes occurring in piles during their operation and also their behaviour in the dynamic state The present work deals mainly with the importance of intrinsic safety devices, with the influence of reactivity variations on the power fluctuations during accidental operation, and with the development of robust and reliable safety appliances. The starting p accident has been especially studied both for low-flux piles where a compromise is necessary between the response time of the safety appliances and the statistical fluctuations and for high lux piles where xenon poisoning has an effect on the lower limit of the velocity of reactivity liberation. The desirability has been stressed of automation as a safety factor in atomic pile control. The details required for an understanding of the diagrams of the apparatus are given. (author) [French] Nous avons aborde le probleme de la securite dans le controle des piles atomiques a la suite de notre participation d'une part aux avant rojets de piles atomiques du CE.A. et d'autre part a l'examen au sein de la sous ommission de surete des piles, de la securite des piles du CE.A. en fonctionnement ou en projet. Nous avons ete amenes a nous interesser alors aux risques encourus par les piles pendant leur fonctionnement et par la meme a leur comportement en regime dynamique. Ce travail traite principalement de l'importance des securites intrinseques, de l'influence des variations de reactivite sur les evolutions de puissance en regime d'accident et du developpement d'appareillages de securite robustes et de fonctionnement tres sur. L'accident de demarrage a ete particulierement

  8. Safety precautions in atomic pile control (1962); Securite dans le controle des piles atomiques (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Furet, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    We have been led to study the problem of safety in atomic pile control as a result of our participation on the one hand in the planning of C.E.A. atomic piles, and on the other hand in the pile safety sub omission considering atomic pile safety of operational or planned C.E.A. piles. We have thus had to consider the wishes occurring in piles during their operation and also their behaviour in the dynamic state The present work deals mainly with the importance of intrinsic safety devices, with the influence of reactivity variations on the power fluctuations during accidental operation, and with the development of robust and reliable safety appliances. The starting p accident has been especially studied both for low-flux piles where a compromise is necessary between the response time of the safety appliances and the statistical fluctuations and for high lux piles where xenon poisoning has an effect on the lower limit of the velocity of reactivity liberation. The desirability has been stressed of automation as a safety factor in atomic pile control. The details required for an understanding of the diagrams of the apparatus are given. (author) [French] Nous avons aborde le probleme de la securite dans le controle des piles atomiques a la suite de notre participation d'une part aux avant rojets de piles atomiques du CE.A. et d'autre part a l'examen au sein de la sous ommission de surete des piles, de la securite des piles du CE.A. en fonctionnement ou en projet. Nous avons ete amenes a nous interesser alors aux risques encourus par les piles pendant leur fonctionnement et par la meme a leur comportement en regime dynamique. Ce travail traite principalement de l'importance des securites intrinseques, de l'influence des variations de reactivite sur les evolutions de puissance en regime d'accident et du developpement d'appareillages de securite robustes et de fonctionnement tres sur. L'accident de demarrage a ete particulierement developpe aussi bien pour les piles a bas

  9. Power Split Strategy for Fuel Cell Hybrid Electric System Stratégie de séparation des flux de puissance pour un système électrique hybride à pile à combustible

    Directory of Open Access Journals (Sweden)

    Di Domenico D.

    2009-11-01

    Full Text Available The power management of a hybrid system composed of a fuel cell, a battery and a DC/DC power converter is developed. A decoupled control strategy is proposed, aimed at balancing the power flow between the stack and the battery and avoiding electrochemical damage due to low oxygen concentration in the fuel cell cathode. The controller is composed of two components. The first controller regulates the compressor, and as a consequence the oxygen supplied to the cathode, via a classic Proportional-Integral controller. The second controller optimally manages the current demanded by the fuel cell and battery via a linear-quadratic control strategy acting on the converter. An Extended Kalman Filter is also designed in order to estimate the battery State of Charge. The closed-loop performance was tested in simulation using a 310th-order system model. Ce papier illustre une stratégie de gestion de puissance pour un système hybride composé d’une pile à combustible, d’une batterie et d’un convertisseur DC/DC. Dans le but d’équilibrer les flux de puissance entre la pile à combustible et la batterie et d’éviter les dégâts causés par une dépression d’oxygène dans le cathode de la pile, un contrôleur découplé est proposé. Ce contrôleur se compose de deux parties. La première, un régulateur proportionnel-intégral, commande le compresseur et, par conséquent, le flux d’oxygène fourni au cathode. La deuxième, un régulateur linéaire-quadratique, gère le courant demandé par la pile à combustible et la batterie. Pour estimer l’état de charge de la batterie, un filtre de Kalman étendu a aussi été conçu. Les performances de la stratégie ont été analysées en simulation avec un modèle de batterie du 310e ordre.

  10. Digitalisation in atomic pile control (1962); La digitalisation dans le controle des piles atomiques (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Furet, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    A brief survey is first given of the general theorems of Boodle's algebra and of sequence systems using D.A. Huffmans theory. Some indications are then given concerning the setting-up and the operation of digital computers and also of the principal codes used in digital techniques. It is then shown how digitalisation in atomic pile control makes it possible to use new techniques having the following advantages in particular: greater working safety, a higher degree of centralisation, and suppression of the linear elements. A few examples are given of the application of these techniques to control, particularly with respect to the measurement of the neutronic power and of the period and also of course, to the treatment of the data and the sequence automatisms. The advantage of using digital techniques in the shutdown channels is also examined. Finally a review is given of the technology and the viability of the control devices used. (author) [French] On rappelle d'abord ici les theoremes generaux de l'algebre de Boole et des systemes a sequences en s'appuyant sur la theorie de D.A. Huffmann. On donne ensuite quelques indications sur l'agencement et le fonctionnement des calculateurs digitaux ainsi que les principaux codes utilises dans les techniques digitales. On montre alors comment la digitalisation dans le controle des piles atomiques permet d'utiliser de nouvelles techniques presentant principalement les avantages suivants: securite de fonctionnement plus grande, centralisation plus elevee et suppression des elements lineaires. Un certain nombre d'exemples sont donnes sur l'application de ces techniques au controle, particulierement en ce qui concerne la mesure de la puissance neutronique, de la periode et aussi bien entendu du traitement des informations et des automatismes a sequences. On analyse aussi l'avantage de l'utilisation des techniques digitales dans les chaines de securite. Enfin, un apercu est donne sur la technologie et la fiabilite des dispositifs

  11. Piles used for the nuclear control of materials; Empilements pour le controle nucleaire des materiaux

    Energy Technology Data Exchange (ETDEWEB)

    Raievski, V; Sautiez, B; Bailly du Bois, B; Tretiakoff, O; Thome, P; Vidal, R; Koppel Martelly, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The devices which make it possible to check on the nuclear qualities of the materials used in reactor construction are described. These verifications bear on substantial masses of materials, following the last stage of their machining. The components found in all these are a graphite pile into which the material to be investigated is inserted, a source of neutrons made up of an Ra-Be system, and a proportional BF{sub 3} counter. The devices described here bear on checking graphite, beryllium oxide and uranium absorption, as well as on a verification of the {sup 235}U content of fuel elements. (author)Fren. [French] On decrit des dispositifs permettant de controler les qualites nucleaires de materiaux utilises dans la construction des piles. Ce controle s'effectue sur des masses importantes de materiaux apres la phase finale d'usinage. Ces dispositifs ont en commun un empilement de graphite recevant le materiau a etudier, une source de neutrons de Ra-Be et un compteur proportionnel a BF{sub 3}. Les dispositifs decrits concernent le controle de l'absorption du graphite, de la glucine et de l'uranium, ainsi que le controle de la teneur en {sup 235}U des elements de combustion. (auteur)

  12. Radiation hazards in the neighbourhood of uranium reactors; Dangers des rayonnements aupres des piles a uranium

    Energy Technology Data Exchange (ETDEWEB)

    Joffre, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1956-07-01

    Radiation hazards near uranium reactors may be divided in two groups. Hazards when the reactor is normally operating: {gamma} radiation from hot uranium or air contamination by fission gases, {gamma} radiation or contamination by the coolant (air, nitrogen, heavy-water), {gamma} radiation from radioisotopes. Hazards in the case of an accident: presence of hot uranium in the atmosphere, soil contamination. (author) [French] Les dangers d'irradiation aupres des piles a uranium sont a classer essentiellement en deux groupes. Les dangers existant aupres d'une pile exploitee normalement: irradiation {gamma} par l'uranium irradie ou contamination de l'air par des gaz de fission, irradiation {gamma} ou contamination par les fluides de refroidissement (air, azote, eau lourde), irradiation {gamma} par les radioelements fabriques. Les dangers en cas d'accident survenant a un reacteur en fonctionnement, ayant pour consequence : la presence dans l'air d'uranium irradie, la contamination du sol. (auteur)

  13. Combustion of Solid Propellants (La Combustion des Propergols Solides)

    Science.gov (United States)

    1991-07-01

    the of ether and ethyl alcohol and removing objective of these lectures to give a this solvent. Instead of having a fibrous comprehensive understanding...do cetto esrne do Les propergols composites, A matrice confifrences une description tout A fait A polymarique charg~o pst, un oxydant at un jour des...rusa., De nouveaux souvant suppos6 qua la vitesa des gaz de oxydes de for ultrafirts mont aujourd’hui combustion est n~gligeable at qua d~velopps pour

  14. Generalities on the dynamic behaviour of rapid reactors. Preliminary studies on Rapsodie; Generalites sur le comportement dynamique des piles rapides. Etudes preliminaires de rapsodie

    Energy Technology Data Exchange (ETDEWEB)

    Campan, J L; Chaumont, J P; Clauzon, P P; Ghesquiere, G; Leduc, J; Schmitt, A P; Zaleski, C P [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1963-07-01

    The study of the dynamic behaviour of fast reactors may be divided into three section: 1. Stability studies around equilibrium power only the linear case was examining. S. Transient studies in the case of usual reactor operation (shut down, scram, etc.) with thermal shocks evaluation, for instance. 3. Explosion studies, for the maximum credible accidents. This report presents the status of the studies performed at the 'Physics Research Department' at Cadarache. Methods used are detailed and illustrated with the results obtained on a preliminary metallic core of the Rapsodie Reactor. (authors) [French] Le comportement dynamique des piles rapides, se presente tout naturellement sous trois aspects: 1. Etude de stabilite autour d'un regime d'equilibre (nous nous sommes bornes ici au cas lineaire). 2. Etude de regimes transitoires lors des operations normales de pile (arret, arret d'urgence, etc.) avec evaluation des chocs thermiques par exemple. 3. Etude des regimes transitoires de caractere explosif lors des accidents les plus graves possibles. Ce rapport presente l'etat des etudes a la date du 20 decembre 1961 a la Section d'Etudes de Piles Rapides a CADARACHE. Les methodes employees ont ete detaillees et illustrees a partir des resultats obtenus sur une premiere version 'combustible metallique' de Rapsodie. (auteurs)

  15. Control panel for radiation around reactors (1963); Tableaux de controle des radiations aupres des piles (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Candes, P; Barthoux, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    This report outlines the general philosophy of radiation control in French reactors and their annexes. The supervision is carried out continuously from a central control panel on which appear all the measurements made and the alarm signals. The equipment is described; one item makes it possible to measure simultaneously the radioactive dusts and gases. The specifications of the alarm system, which is considered to be the most important are given. Finally a new measuring technique is proposed which makes it possible to reduce considerably the cost of radiation control while at the same time providing the results in a form in which they can be easily treated, in particular in the case of the calculation of total doses. (authors) [French] Ce rapport definit la philosophie generale du controle des radiations dans les piles francaises et dans leurs annexes. La surveillance se fait d'une maniere continue a partir d'un tableau de controle centralise ou sont reportees toutes les mesures et les signalisations d'alarme. On decrit les appareils utilises, dont un permet la mesure simultanee des poussieres et gaz radioactifs, et on definit les specifications de la fonction alarme qui est consideree comme la plus importante. Enfin on propose une nouvelle technique de mesure qui permettrait de reduire considerablement le cout du controle des radiations tout en fournissant des resultats plus facilement exploitables, en particulier pour le calcul des doses integrees. (auteurs)

  16. Sizing Stack and Battery of a Fuel Cell Hybrid Distribution Truck Dimensionnement pile et batterie d’un camion hybride à pile à combustible de distribution

    Directory of Open Access Journals (Sweden)

    Tazelaar E.

    2012-08-01

    à combustible et construit à des fins de démonstration, sert de base à l’étude de l’effet de la taille de la pile (kW et de la batterie (kW, kWh sur la consommation d’hydrogène du véhicule. Trois cycles de vitesse définissent les conditions spécifiques de conduite du véhicule : le NEDC pour les véhicules de faible puissance, le CSC et le cycle JE05. L’ECMS (Equivalent Consumption Minimization Strategy est utilisée pour déterminer les consignes pour la pile à combustible et la batterie. Cette stratégie de commande permet d’atteindre une consommation proche du minimum global, obtenu par la programmation dynamique (DP. Le problème de dimensionnement peut être résolu en utilisant la programmation dynamique et l’ECMS a l’avantage, par rapport à la programmation dynamique, de pouvoir être mise en oeuvre en temps réel. Pour le véhicule et matériels considérés, les trois cycles de conduite permettent d’obtenir les puissances nominales optimales pour la pile à combustible à savoir environ trois fois la puissance moyenne demandée par le conducteur. Cela montre que le dimensionnement de la pile à combustible pour la puissance moyenne ou maximale, n’est pas nécessairement optimale vis-à-vis de la sobriété en carburant. La batterie est dimensionnée pour fournir la différence entre la puissance nominale de la pile à combustible et le pic de puissance dans la demande totale en puissance électrique. Le dimensionnement de la batterie est dominée par ses capacités de tenue en puissance. Par conséquent, un taux plus haut entre kW et kWh cause une diminution du poids de la batterie qui à son tour conduit à une consommation d’hydrogène plus basse. La capacité de stockage d’énergie de la batterie ne devient un problème que pour les taux de C-ratio supérieurs à 30. Par rapport à un prolongateur d’autonomie (RE où la taille de la pile est comparable à la puissance moyenne et où la pile est exploitée sur un niveau

  17. Burn up physics; Physique des combustibles irradies

    Energy Technology Data Exchange (ETDEWEB)

    Tretiakoff, O [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    requires samples of the order of several kilograms only. The relationships between these measurements and the investigations of lattices are discussed, and an outline is given of the way of carrying out the systematic study of fuels of various compositions. The method has been successfully applied to the systematic study of irradiated fuels (analysed independently by the methods mentioned above) thus giving the possibility of measuring in situ the absorption of fission products. (author) [French] Cette communication expose un ensemble d'etudes theoriques et d'experiences, effectuees au CEA et destinees a faire progresser la connaissance de l'evolution de la reactivite (au cours de l'irradiation du combustible) dans les reacteurs a uranium naturel ou faiblement enrichi.,. On rappelle les difficultes de l'experimentation directe sur des masses importantes de combustible irradie - en particulier dans les reacteurs de puissance en fonctionnement - et on souligne la necessite d'experiences a caractere fondamental distinguant: d'une part l'evolution de la composition des combustibles (chaines de noyaux lourds, produits de fission), d'autre part l'effet des modifications de composition sur le bilan de neutrons. Avant de presenter trois categories d'experiences que l'on est conduit a entreprendre, on rappelle l'importance des problemes lies aux spectres de neutrons et on decrit rapidement les methodes pratiques de calcul utilisees. L'irradiation systematique de quelques types de combustibles, suivie de leur analyse chimique et isotopique est en cours depuis plusieurs annees. On donne un apercu de l'ensemble du programme experimental et on decrit les moyens et les methodes mis en oeuvre: chaine {alpha}, {beta}, {gamma} pour la preparation des echantillons, dosage du Plutonium par coulommetrie et double dilution isotopique, separation du Bore utilise dans certains cas pour la mesure des densites de neutrons integrees. On discute sur quelques exemples l'interpretation des mesures

  18. Fuel slugs considered for use in the high flux reactor EL3; Elements combustibles envisages pour la pile a haut flux EL 3

    Energy Technology Data Exchange (ETDEWEB)

    Stohr, J A; Caillat, R; Gauthron, M; Montagne, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    EL3 was designed essentially for the study, under irradiation conditions, of materials used in the construction of atomic reactors. The study schedule allocates considerable time and effort to new types of fuel slugs. The present report described the various types of slug being tested or scheduled for tests. After laboratory study, each slug is tested in an experimental cell in the pile. The best are retained and used to charge the reactor (the present charge is purely provisional to permit first criticality and power rise tests)ren. [French] La pile EL3 est essentiellement destinee a l'etude sous irradiation des materiaux utilises dans la construction des reacteurs atomiques. Dans ce programme, une tres large part est reservee a l'etude de nouveaux elements combustibles. Le present rapport decrit les differentes solutions de cartouches dont l'essai est envisage ou en cours. Apres etude en laboratoire, chacune de ces solutions est testee dans une cellule experimentale en pile. Les meilleures seront retenues pour constituer le chargement normal de la pile (le chargement actuel etant essentiellement une solution provisoire qui a permis la divergence de la pile et les premiers essais de montee en puissance). (auteur)

  19. Special concretes for protection in piles (1963); Les betons speciaux dans la protection des piles (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Condat, M.J.; Lafore, P.; Rastoin, J. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1963-07-01

    The report reviews the main concretes used for the protection of reactors. First are examined the general factors affecting the selection of concretes for protection; some of the general aspects of radiation attenuation (fast and thermal neutrons, {gamma}) are then recalled. After an enumeration of the qualities and defects of conventional concretes, desirable or possible improvements are proposed: introduction of heavy elements for increasing the efficiency with respect to fast neutrons and {gamma}; increase in the hydrogen content (as H{sub 2}O), addition of absorbent products (B, Li, rare earths) for thermal neutron capture. A list is given of the principal products used for this purpose. Finally there is a rapid review of the preparation, the stability with time, and the resistance to radiation and to heat. Appendices and tables give details and numerical values. Appendix 1 deals with the question of water in concretes. Appendix 2 gives a classification of concretes based mainly on their density. At the end, ten tables give the compositions and values of the physical and mechanical characteristics of sixteen particularly typical concretes. (authors) [French] Le rapport passe en revue les principaux betons utilisables pour la protection des reacteurs. On examine d'abord les facteurs generaux influencant la selection des betons de protection; on rappelle ensuite brievement les aspects generaux de l'attenuation des rayonnements (neutrons rapides, neutrons thermiques, {gamma}). Apres avoir rappele les qualites et les defauts des betons classiques, on fait ressortir les perfectionnements souhaitables ou necessaires: introduction d'elements lourds pour ameliorer l'efficacite contre les neutrons rapides et les {gamma}; augmentation de la teneur en H (en H{sub 2}O); addition de corps absorbants (B, Li, terres rares) pour capturer les neutrons thermiques. On enumere les principaux corps utilises a cet effet. On termine par un tres rapide apercu sur

  20. Special concretes for protection in piles (1963); Les betons speciaux dans la protection des piles (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Condat, M J; Lafore, P; Rastoin, J [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1963-07-01

    The report reviews the main concretes used for the protection of reactors. First are examined the general factors affecting the selection of concretes for protection; some of the general aspects of radiation attenuation (fast and thermal neutrons, {gamma}) are then recalled. After an enumeration of the qualities and defects of conventional concretes, desirable or possible improvements are proposed: introduction of heavy elements for increasing the efficiency with respect to fast neutrons and {gamma}; increase in the hydrogen content (as H{sub 2}O), addition of absorbent products (B, Li, rare earths) for thermal neutron capture. A list is given of the principal products used for this purpose. Finally there is a rapid review of the preparation, the stability with time, and the resistance to radiation and to heat. Appendices and tables give details and numerical values. Appendix 1 deals with the question of water in concretes. Appendix 2 gives a classification of concretes based mainly on their density. At the end, ten tables give the compositions and values of the physical and mechanical characteristics of sixteen particularly typical concretes. (authors) [French] Le rapport passe en revue les principaux betons utilisables pour la protection des reacteurs. On examine d'abord les facteurs generaux influencant la selection des betons de protection; on rappelle ensuite brievement les aspects generaux de l'attenuation des rayonnements (neutrons rapides, neutrons thermiques, {gamma}). Apres avoir rappele les qualites et les defauts des betons classiques, on fait ressortir les perfectionnements souhaitables ou necessaires: introduction d'elements lourds pour ameliorer l'efficacite contre les neutrons rapides et les {gamma}; augmentation de la teneur en H (en H{sub 2}O); addition de corps absorbants (B, Li, terres rares) pour capturer les neutrons thermiques. On enumere les principaux corps utilises a cet effet. On termine par un tres rapide apercu sur la mise en oeuvre, la

  1. Calculation programme for the accidental transients in reactors of the gas-graphite type; Programme de calcul des transitoires accidentels des piles de la filiere graphite-gaz

    Energy Technology Data Exchange (ETDEWEB)

    Henri, Ch.; Bayard, J.P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The study of the behaviour of the fuel during certain incidents or accidents in reactors is closely connected to the study of the changes in temperature. This document describes in the first part the main physical phenomena governing the kinetics of the accident. The aim is to know the temperatures at all points and at all times during the irregular regime which can follow the initial stable regime. In the second part an explanation is given of the numerical methods used. (authors) [French] L'etude du comportement du combustible lors de certains incidents ou accidents de pile est etroitement liee a l'etude de l'evolution des temperatures. Dans sa premiere partie, ce document decrit les phenomenes physiques principaux intervenant dans la cinetique de l'accident. Le but recherche est la connaissance des temperatures en tout point et a tout instant d'un regime varie, faisant suite a un regime initial stable. Dans la deuxieme partie les methodes numeriques employees sont explicitees. (auteurs)

  2. Some aspects of in-pile swelling of fissile materials, 1. part: non-alloyed {alpha} uranium; Quelques aspects du gonflement en pile des materiaux fissiles. 1. partie: uranium {alpha} non allie

    Energy Technology Data Exchange (ETDEWEB)

    Mikailoff, H [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    An examination has been carried out of non-alloyed uranium samples, having various structural states, cold-worked and recrystallized, as-cast and {beta}-treated, and irradiated at temperatures of between 450 and 600 C and with burn-ups from 1300 to 5500 MW days/metric ton. These samples swelled because of precipitation of the fission gases the porosity thus produced has a morphology depending mainly on the type of deformation to which the metal has been subjected and which is due to in-pile growth. The most homogeneous distribution of pores, and thus that leading to the minimum swelling, is only observed in the material having a marked [010] texture in which the growth and perhaps the thermal cycling introduce little or no strain. For other materials the deformation /swelling association causes a more rapid destruction of the samples either by cracking when the deformation is due to twinning, or by pronounced swelling localized in the bands when deformation is due to slipping. Finally the fission-gas precipitation considerably facilitates, above 500 C, the germination and growth of the intergranular cracks which can then develop at low stresses. (author) [French] On a examine des echantillons d'uranium non allie, de divers etats structuraux, marteles et recristallises, bruts de coulee et traites {beta}, irradies a des temperatures comprises entre 450 et 600 C, et a des taux de combustion allant de 1300 a 5500 MWj/t. Ces echantillons ont gonfle par suite de la precipitation de gaz de fission: la porosite ainsi fournie a une morphologie qui depend principalement des modes de deformation subie par le metal et due a la croissance en pile. La repartition la plus homogene des pores, donc celle qui donnera le gonflement minimum, est observee seulement dans le materiau a forte texture [010] dans lequel la croissance et eventuellement le cyclage thermique introduisent peu ou pas de contraintes. Dans les autres materiaux l'association deformation/gonflement rend plus rapide

  3. Trace element emissions from spontaneous combustion of gob piles in coal mines, Shanxi, China

    Science.gov (United States)

    Zhao, Y.; Zhang, Jiahua; Chou, C.-L.; Li, Y.; Wang, Z.; Ge, Y.; Zheng, C.

    2008-01-01

    The emissions of potentially hazardous trace elements from spontaneous combustion of gob piles from coal mining in Shanxi Province, China, have been studied. More than ninety samples of solid waste from gob piles in Shanxi were collected and the contents of twenty potentially hazardous trace elements (Be, F, V, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Cd, Sn, Sb, Hg, Tl, Pb, Th, and U) in these samples were determined. Trace element contents in solid waste samples showed wide ranges. As compared with the upper continental crust, the solid waste samples are significantly enriched in Se (20x) and Tl (12x) and are moderately enriched in F, As, Mo, Sn, Sb, Hg, Th, and U (2-5x). The solid waste samples are depleted in V, Cr, Mn, Co, Ni, Cu, and Zn. The solid waste samples are enriched in F, V, Mn, Cr, Co, Ni, Cu, Zn, Sb, Th, and U as compared with the Shanxi coals. Most trace elements are higher in the clinker than in the unburnt solid waste except F, Sn, and Hg. Trace element abundances are related to the ash content and composition of the samples. The content of F is negatively correlated with the ash content, while Pb is positively correlated with the ash. The concentrations of As, Mn, Zn, and Cd are highly positively correlated with Fe2O3 in the solid waste. The As content increases with increasing sulfur content in the solid waste. The trace element emissions are calculated for mass balance. The emission factors of trace elements during the spontaneous combustion of the gobs are determined and the trace element concentrations in the flue gas from the spontaneous combustion of solid waste are calculated. More than a half of F, Se, Hg and Pb are released to the atmosphere during spontaneous combustion. Some trace element concentrations in flue gas are higher than the national emission standards. Thus, gob piles from coal mining pose a serious environmental problem. ?? 2007 Elsevier B.V. All rights reserved.

  4. Recent developments in the field of refractory fuels; Developpements recents dans le domaine des combustibles refractaires

    Energy Technology Data Exchange (ETDEWEB)

    Accary, A; Delmas, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    or arc fusion). This latter method is based on fusion by electronic bombardment associated with the continuous casting. (authors) [French] L'effort des recentes annees au Commissariat a l'Energie Atomique dans le domaine des combustibles ceramiques a surtout porte sur le bi-oxyde d'uranium et les alliages uranium-carbone. Le bi-oxyde d'uranium est etudie dans l'optique de son utilisation comme combustible de la premiere charge d'EL 4, dans laquelle on impose au point le plus charge une conductibilite thermique integree de 29 W/cm pour une temperature de surface de 750 C environ. On s'est specialement preoccupe de mettre en place un procede de preparation d'une poudre de bi-oxyde de bonnes caracteristiques et le frittage industriel de cette poudre, et d'evaluer les principales proprietes des corps obtenus en relation avec les conditions des corps obtenus en relation avec les conditions prevues de leur utilisation: - aspect de micro-structure et distribution des pores, - comportement mecanique et thermique en geometrie cylindrique, - controle de l'oxygene excedentaire dans les produits industriels, - compatibilite aux hautes temperatures avec les oxydes utilisables comme isolants thermiques, - comportement des produits de fission gazeux a haute temperature apres irradiation ou au cours de l'irradiation. Dans le cas des carbures d'uranium, notre but a ete de determiner les conditions de fabrication industrielle d'un combustible satisfaisant de composition voisine de UC. Ceci nous a conduits a entreprendre un certain nombre d'etudes fondamentales Sur le domaine d'existence de UC non stoechiometrique, - l'influence, sur les proprietes de UC, des elements O et N dissous dans ce materiau, - la compatibilite des alliages uranium-carbone avec differents materiaux de gaine metalliques ou ceramiques, - la corrosion des alliages uranium-carbone par H{sub 2}O et CO{sub 2}, - les methodes de preparation d'echantillons de haute purete, - les dispositifs d'irradiation en pile

  5. New trends in pile safety instrumentation; Les tendances nouvelles dans l'instrumentation de securite des piles

    Energy Technology Data Exchange (ETDEWEB)

    Furet, J.

    1961-04-19

    This report addresses the protection of nuclear piles against damages due to operation incidents. The author discusses the current trends in the philosophy of safety of atomic power piles, identifies the parameters which define safety systems, presents tests to be performed on safety chains, comments the relationship between safety and the decrease of the number of pile inadvertent shutdowns, discusses the issues of instrument failures and chain multiplicity, comments the possible improvement of the operation of elements which build up safety chains (design simplification, development of semiconductors, replacement of electromechanical relays by static relays), the role of safety logical computers and the development of automatics in pile safety, presents automatic control as a safety factor (example of automatic start-up), and finally comments the use of fuses.

  6. Determining a pool - type reactor fuel policy; Recherche d'une politique de gestion du combustible d'une pile piscine

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1964-07-01

    Refuelling the 10 to 15 MW pool type reactor considered here will occur frequently (some 10 elements every 3 to 4 weeks). It is therefore necessary to determine the most economic fuel policy. This study proposes to define a strategy that will make it possible to decide on the number and characteristics of the shipment containers, as well as on the means of storage, so as to reduce the risks as much as possible should the basic parameters of the study vary. Among these parameters, the respective influence of which is investigated, chemical reprocessing costs play a vital part. Two examples of optimum fuel management are given according to whether the reprocessing charges applied are those of the old or of the 1961 U.S. AEC base charges for reprocessing highly enriched irradiated fuel. (authors) [French] Les renouvellements du combustible de la pile piscine de 10 a 15 MW consideree ici, seront frequents (quelques 10 elements toutes les 3 ou 4 semaines). Il est donc important de connaitre les meilleures conditions de gestion economique de ce combustible. Cette etude se propose de definir une strategie permettant de choisir le nombre et les caracteristiques des containers de transport, ainsi que les moyens de stockage, de facon a minimiser les risques si les parametres de base de l'etude varient. Parmi ces parametres dont l'influence respective est successivement examinee, le cout du traitement chimique joue un role fondamental. Deux exemples d'optimum de gestion sont donnes selon que le tarif de retraitement est conforme a l'ancien tarif de l'U.S. AEC ou au tarif 1961 de traitement des combustibles irradies tres enrichis. (auteurs)

  7. Neutronic study of the two french heavy water reactors; Etude neutronique des deux piles francaises a eau lourde

    Energy Technology Data Exchange (ETDEWEB)

    Horowitz, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-07-01

    The two french reactors - the reactor of Chatillon, named Zoe, and the reactor of Saclay - P2 - were the object of detailed neutronic studies which the main ideas are exposed in this report. These studies were mostly done by the Department of the Reactor Studies (D.E.P.). We have thus studied the distribution of neutronic fluxes; the factors influencing reactivity; the link between reactivity and divergence with the formula of Nordheim; the mean time life of neutrons; neutron spectra s of P2; the xenon effect; or the effect of the different adjustments of the plates and controls bar. (M.B.) [French] Les deux reacteurs francais - la pile de Chatillon, appelee ZOE, et la pile de Saclay, designee dans la suite par P2 - ont fait l'objet d'etudes neutroniques detaillees dont les principales sont exposees dans ce rapport. Ces etudes ont ete pour la plupart effectuees dans le cadre du Departement des Etudes de Piles (D.E.P.). Nous avons ainsi entre autre etudie la distribution du flux neutronique; les facteurs influencants la reactivite; le lien entre reactivite et divergence par la formule de Nordheim; le temps de vie moyen des neutrons; les spectres de neutrons de P2; l'effet xenon; ou encore l'effet des differents reglages des plaques et barres de controles. (M.B.)

  8. Cost of transporting irradiated fuels and maintenance costs of a chemical treatment plant for irradiated fuels; Cout de transport des combustibles irradies et cout d'entretien d'une usine de traitement chimique des combustibles irradies

    Energy Technology Data Exchange (ETDEWEB)

    Sousselier, Y [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    other plants, an attempt has been made to express the maintenance costs as a percentage of the investments corresponding to each of the sections considered. The unequal aspect of maintenance in a plant of this type is demonstrated, this being due particularly to the inaccessibility of most of the equipment during operation. Finally some conclusions are drawn on what the maintenance costs could be and the means of reducing them in future plants. (author) [French] Le cout du cycle des combustibles a fait l'objet de nombreuses etudes mais beaucoup d'entre elles sont basees sur des etudes a priori et sont donc plus ou moins sujettes a caution. C'est ainsi que dans la partie ayant trait au traitement des combustibles irradies, des elements importants du cout n'ont que rarement ete precises a la suite d'experiences pratiques: le cout du transport des combustibles eux-memes et le cout d'entretien de l'usine. Les etudes relatives au cout du transport sont generalement basees sur des calculs faits a partir de donnees un peu arbitraires. Les etudes qui ont ete faites en France pour le transport d'uranium irradie entre les reacteurs EdF de Chinon et l'usine de retraitement de La Hague et l'uranium irradie des reacteurs de recherches jusqu'aux usines de retraitement etrangeres sont exposees et montrent qu'il a ete possible d'arriver a des types de chateaux de transport et des modalites d'expedition qui permettent de diminuer les couts dans des proportions tres importantes. Ceci a pu etre obtenu soit en combinant les transports par rail et par route soit par l'augmentation des capacites unitaires des chateaux de transport: on cite le cas d'un chateau de transport pour element des piles piscines qui est capable de transporter un coeur complet d'une pile a la fois entrainant une reduction substantielle du cout. Les etudes concernant les couts d'entretien d'usines de retraitement sont encore plus rares, or, dans les usines a entretien direct, ces couts sont une fraction non negligeable

  9. Magnox Fuel Cycles; Cycles des combustibles gaines de magnox; Toplivnye tsikly magnoks; Ciclos de combustible magnox

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, A. [United Kingdom Atomic Energy Authority, Risley, Warrington, Lancs (United Kingdom)

    1963-10-15

    The interaction between reactivity flux and temperature distributions and irradiation patterns caused by different refuelling policies is considered and present calculation methods outlined. Various refuelling schemes for both batch and continuous discharge systems are compared. The problem of the efficient irradiation of the first charge is considered together with delayed onset refuelling and shuffling schemes. The economic advantages and problems of using non-natural uranium in flattened reactors are discussed. The practical consideration of on-load refuelling schemes on new reactors are considered and reference is made to the experience gained on Bradwell and Berkeley. The effect of the variation of fuel cost and endurance on fuel-cycle economics is outlined. (author) [French] L'auteur etudie en premier lieu l'interaction entre les distributions de la temperature du flux et de la reactivite, d'une part, et le regime de l'irradiation, d'autre part, dans le cas de differents programmes de rechargement du combustible et il decrit brievement les methodes de calcul actuelles. Il compare ensuite differents programmes de rechargement du combustible pour le dechargement par lots et le dechargement continu. Il etudie le probleme de l'irradiation effica ce de la premiere charge dans le cadre de programmes de remplacement et de deplacement des cartouches a action retardee. Il analyse les avantages economiques de l'utilisatio n d'uranium non naturel dans les reacteurs a flux aplati et les problemes qu'elle pose. Il examine les aspects pratiques des programmes de rechargement en marche pour les nouveaux reacteurs, en se referant a l'experience acquise au moyen des reacteurs de Bradwell et de Berkeley. Enfin, il decrit brievement les effets des variations du cout et de la resistance du combustible sur l'economie des cycles de combustible. (author) [Spanish] La memoria estudia la interaccion entre el flujo de reactividad y la distribucion de temperaturas, asi como los

  10. Protection for work in the pressure tank of the pile G2; Protection des travaux dans le caisson de la pile G2

    Energy Technology Data Exchange (ETDEWEB)

    Chassany, J Ph; Rodier, J [Commissariat a l' Energie Atomique, Service de Protection contre les Radiations, Marcoule (France). Centre d' Etudes Nucleaires

    1961-07-01

    While the pile was shut down after a three-month run at full power, the secondary circuit was cleaned and some alterations were carried out. The pile contained 100 tons of uranium, half of which made up the periphery and was irradiated uranium. The possibility of carrying on work inside the pressure tank was not considered at the time of construction. Because of the heat and the irradiation it was only possible to remain in the pressure tank for a limited period of time, and several operators received doses of the order of 1.5 rem. Cotton clothing gave satisfactory protection against contamination and was more comfortable than the vinyl equipment. The work lasted for 17 days and involved 881 incursions into the pressure tank. (author) [French] Un nettoyage et des modifications ont ete realises dans le circuit secondaire pendant l'arret de la pile apres un fonctionnement de trois mois a pleine puissance. La pile contenait 100 tonnes d'uranium dont la moitie, composant la peripherie, etait de l'uranium irradie. La possibilite d'entreprendre un travail a l'interieur du caisson n'avait pas ete envisage lors de la construction. Le temps de sejour dans le caisson etait a la fois limite par l'irradiation et la chaleur, plusieurs operateurs, ont integre une dose de l'ordre de 1,5 rem. Les vetements de coton ont apporte une protection contre la contamination satisfaisante et un confort relatif par rapport aux equipements de vinyle. L'intervention a dure 17 jours, a comporte 881 entrees dans le caisson. (auteur)

  11. Optimization of fuel cycles: marginal loss values; Optimisation des cycles de combustibles: valeurs marginales des pertes

    Energy Technology Data Exchange (ETDEWEB)

    Gaussens, J [Commissariat a l' Energie Atomique, 75 - Paris (France); Lasteyrie, B de; Doumerc, J [Compagnie pour l' Etude et la Realisation de Combustibles Atomiques, 75 - Paris (France)

    1965-07-01

    comme definitivement perdue, alors que le reste pourrait etre recupere et recycle. Le cout eleve des pertes, recyclees ou non, d'autant plus eleve que l'uranium est plus enrichi, exige qu'il en soit tenu compte dans l'optimisation generale des cycles de combustible. Il importe donc de determiner leur niveau le plus souhaitable economiquement, aux diverses etapes d'elaboration du combustible nucleaire. Mais en France et dans d'autres pays, la production de matieres fissiles est geree par l'Etat, tandis que la fabrication de l'element combustible est effectuee par l'industrie privee. Les criteres d'optimisation et l'interet economique accorde aux pertes sont donc differents pour les deux parties de la chaine de fabrication. Pour tenter neanmoins d'atteindre un optimum conforme a l'interet collectif sans intervenir dans la politique de prix de l'entreprise, on peut utiliser la propriete des couts marginaux d'etre egaux entre eux a l'optimum, pour un volume de production donne. On peut donc ajuster le niveau des pertes pour realiser cette egalite des couts marginaux dont le calcul est plus facile a obtenir de la firme que la justification des prix eux-memes. On s'apercoit d'ailleurs que, bien qu'axee essentiellement sur les pertes, cette analyse globale peut conduire a une meilleure utilisation d'autres facteurs de production. On donne un expose theorique et des exemples pratiques de cette methode d'optimisation economique dans le cadre de la fabrication d'elements combustibles destines a des reacteurs du type: uranium naturel, moderes au graphite et refroidis par le gaz carbonique. (auteurs)

  12. In-pile experimental device for Sirene thermionic converters; Dispositif d'experimentation en pile des convertisseurs thermoioniques sirene

    Energy Technology Data Exchange (ETDEWEB)

    Bliaux, J; Durand, J; Lazare-Chopard, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    The irradiation device described here, was built for in pile life tests of 100 We SIRENE converters. The nuclear converter is located in a sealed vacuum chamber, which is plugged at the lower end of a coaxial tubing acting as electrical leads. The output power is available on a variable resistive load on the bank of the reactor pool. Thermal, electrical and neutronic parameters of the converter are recorded. Since 1967, two permanent devices allowed five experiments in the swimming pool TRITON (CEN-FAR) and the results, obtained till now, are presented. (authors) [French] Le dispositif d'irradiation SIRENE decrit ici a ete concu en vue d'une etude statistique de performances de convertisseurs thermoioniques nucleaires de puissance unitaire 100 We. Le dispositif doit assurer la bonne marche du convertisseur en pile, permettre le changement de la position verticale du convertisseur dans le coeur, sortir du coeur la puissance electrique convertie sans degradation notable et enregistrer les differents parametres thermiques, electriques et neutroniques du convertisseur. Depuis 1967, deux dispositifs fonctionnent en permanence et ont permis de faire cinq experiences dans le reacteur piscine TRITON du CEN-FAR. Les resultats obtenus jusqu'a present, sont presentes. (auteurs)

  13. Automatic welding of fuel elements; Soudure automatique des elements combustibles

    Energy Technology Data Exchange (ETDEWEB)

    Briola, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The welding process depends on the type of fuel element, the can material and the number of cartridges to be welded: - inert-gas welding (used for G2 and the 1. set of EL3), - inert atmosphere arc welding (used for welding uranium and zirconium), - electronic welding (used for the 2. set of EL3 and the tank of Proserpine). (author) [French] Suivant le type d'element combustible, le materiau de gaine et l'importance de la serie a fabriquer, le soudeur dispose des differents procedes examines dans cette communication: - soudure classique a l'arc sous gaz inerte (utilisee pour G2 et le premier jeu EL3), - soudure en atmosphere complete d'argon (utilisee pour la soudure d'uranium et de zirconium), - soudure electronique (utilisee pourdeuxieme jeu EL3 et la cuve de Proserpine). (auteur)

  14. Some particular problems put by operating experimental reactors; Quelques problemes particuliers poses par le fonctionnement des piles laboratoires

    Energy Technology Data Exchange (ETDEWEB)

    Candiotti, C; Mabeix, R; Uguen, R [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    On basis of a six years experience in operating research reactors, the authors explain, first, the difference in their utilization between these piles and another similar ones and, after, in consequence, they set off corresponding servitudes. These servitudes put very particular problems in operating itself, maintenance, modifications or additions on these apparatus. (author) [French] Les redacteurs se basant sur six annees d'experience dans l'exploitation de reacteurs de recherche, exposent tout d'abord les differences d'utilisation entre ces engins et d'autres appareils fonctionnellement similaires et font ressortir, par voie de consequence, les servitudes correspondantes. Ces servitudes posent des problemes tres particuliers dans les domaines de l'exploitation proprement dite, de l'entretien, des modifications ou adjonctions apportees a l'ensemble. (auteur)

  15. Some particular problems put by operating experimental reactors; Quelques problemes particuliers poses par le fonctionnement des piles laboratoires

    Energy Technology Data Exchange (ETDEWEB)

    Candiotti, C.; Mabeix, R.; Uguen, R. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    On basis of a six years experience in operating research reactors, the authors explain, first, the difference in their utilization between these piles and another similar ones and, after, in consequence, they set off corresponding servitudes. These servitudes put very particular problems in operating itself, maintenance, modifications or additions on these apparatus. (author) [French] Les redacteurs se basant sur six annees d'experience dans l'exploitation de reacteurs de recherche, exposent tout d'abord les differences d'utilisation entre ces engins et d'autres appareils fonctionnellement similaires et font ressortir, par voie de consequence, les servitudes correspondantes. Ces servitudes posent des problemes tres particuliers dans les domaines de l'exploitation proprement dite, de l'entretien, des modifications ou adjonctions apportees a l'ensemble. (auteur)

  16. Can-rupture detection in gas-cooled nuclear reactors; La detection des ruptures de gaine dans les piles nucleaires refroidies par gaz

    Energy Technology Data Exchange (ETDEWEB)

    Roguin, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    Can-rupture detection (DRG) is one important aspect of pile safety, more particularly so in the case of gas-cooled reactors. A rapid and sure detection constitutes also an improvement as far as the efficiency of electricity-producing nuclear power stations are concerned. Among the numerous can-rupture detection methods, that based on the measurement of the concentration of short-lived fission gases in the heat-carrying fluid has proved to be the most sensitive and the most rapid. A systematic study of detectors based on the electrostatic collection of the daughter products of fission gases has been undertaken with a view to equip the reactors EL 2, G 3, EDF 1, EDF 2 and EDF 3, the gas loops of PEGASE and EL 4. The different parameters are studied in detail in order to obtain a maximum sensitivity and to make it possible to construct detection devices having the maximum operational reliability and requiring the minimum maintenance. The primary applications of these devices are examined in the case of the above-mentioned reactors. (author) [French] La Detection des Ruptures de Gaines (D. R. G.) est un aspect important de la securite des piles et plus particulierement des piles refroidies par un gaz. Une detection rapide et sure constitue aussi un element d'amelioration du rendement des centrales nucleaires productrices d'energie electrique. Parmi les nombreuses methodes de detection des ruptures de gaines, la mesure de la concentration dans le fluide caloporteur des gaz de fission a vie courte s'est revelee comme la plus sensible et la plus rapide. Une etude systematique des detecteurs a collection electrostatique des descendants des gaz de fission a ete entreprise en vue d'equiper les piles EL 2, G 3, EDF 1, EDF 2 et EDF 3, les boucles a gaz de la pile Pegase et la pile EL 4. Les divers parametres sont etudies en detail pour obtenir une sensibilite maximum et permettre la realisation de dispositifs de detection ayant le maximum de securite de

  17. Can-rupture detection in gas-cooled nuclear reactors; La detection des ruptures de gaine dans les piles nucleaires refroidies par gaz

    Energy Technology Data Exchange (ETDEWEB)

    Roguin, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    Can-rupture detection (DRG) is one important aspect of pile safety, more particularly so in the case of gas-cooled reactors. A rapid and sure detection constitutes also an improvement as far as the efficiency of electricity-producing nuclear power stations are concerned. Among the numerous can-rupture detection methods, that based on the measurement of the concentration of short-lived fission gases in the heat-carrying fluid has proved to be the most sensitive and the most rapid. A systematic study of detectors based on the electrostatic collection of the daughter products of fission gases has been undertaken with a view to equip the reactors EL 2, G 3, EDF 1, EDF 2 and EDF 3, the gas loops of PEGASE and EL 4. The different parameters are studied in detail in order to obtain a maximum sensitivity and to make it possible to construct detection devices having the maximum operational reliability and requiring the minimum maintenance. The primary applications of these devices are examined in the case of the above-mentioned reactors. (author) [French] La Detection des Ruptures de Gaines (D. R. G.) est un aspect important de la securite des piles et plus particulierement des piles refroidies par un gaz. Une detection rapide et sure constitue aussi un element d'amelioration du rendement des centrales nucleaires productrices d'energie electrique. Parmi les nombreuses methodes de detection des ruptures de gaines, la mesure de la concentration dans le fluide caloporteur des gaz de fission a vie courte s'est revelee comme la plus sensible et la plus rapide. Une etude systematique des detecteurs a collection electrostatique des descendants des gaz de fission a ete entreprise en vue d'equiper les piles EL 2, G 3, EDF 1, EDF 2 et EDF 3, les boucles a gaz de la pile Pegase et la pile EL 4. Les divers parametres sont etudies en detail pour obtenir une sensibilite maximum et permettre la realisation de dispositifs de detection ayant le maximum de securite de fonctionnement et le

  18. Optimization of fuel cycles: marginal loss values; Optimisation des cycles de combustibles: valeurs marginales des pertes

    Energy Technology Data Exchange (ETDEWEB)

    Gaussens, J. [Commissariat a l' Energie Atomique, 75 - Paris (France); Lasteyrie, B. de; Doumerc, J. [Compagnie pour l' Etude et la Realisation de Combustibles Atomiques, 75 - Paris (France)

    1965-07-01

    'uranium doit etre consideree comme definitivement perdue, alors que le reste pourrait etre recupere et recycle. Le cout eleve des pertes, recyclees ou non, d'autant plus eleve que l'uranium est plus enrichi, exige qu'il en soit tenu compte dans l'optimisation generale des cycles de combustible. Il importe donc de determiner leur niveau le plus souhaitable economiquement, aux diverses etapes d'elaboration du combustible nucleaire. Mais en France et dans d'autres pays, la production de matieres fissiles est geree par l'Etat, tandis que la fabrication de l'element combustible est effectuee par l'industrie privee. Les criteres d'optimisation et l'interet economique accorde aux pertes sont donc differents pour les deux parties de la chaine de fabrication. Pour tenter neanmoins d'atteindre un optimum conforme a l'interet collectif sans intervenir dans la politique de prix de l'entreprise, on peut utiliser la propriete des couts marginaux d'etre egaux entre eux a l'optimum, pour un volume de production donne. On peut donc ajuster le niveau des pertes pour realiser cette egalite des couts marginaux dont le calcul est plus facile a obtenir de la firme que la justification des prix eux-memes. On s'apercoit d'ailleurs que, bien qu'axee essentiellement sur les pertes, cette analyse globale peut conduire a une meilleure utilisation d'autres facteurs de production. On donne un expose theorique et des exemples pratiques de cette methode d'optimisation economique dans le cadre de la fabrication d'elements combustibles destines a des reacteurs du type: uranium naturel, moderes au graphite et refroidis par le gaz carbonique. (auteurs)

  19. Contribution to the study of can deformations in the fuel elements of gas-graphite reactors during thermal cycling; Contribution a l'etude des deformations des gaines des elements combustibles de reacteur graphite-gaz au cours du cyclage thermique

    Energy Technology Data Exchange (ETDEWEB)

    Gauthron, M; Boudouresques, B; Delpeyroux, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The cans of fuel cartridges used in reactors of the gas-graphite type have either longitudinal fins of variable thickness, short herring-bone fins, or else a mixture of the two. An important test of the strength of these cartridges is their behaviour during thermal cycling carried out in cells reproducing in-pile conditions. It has been observed during with rapid cooling that there occurs a shortening at the base of the fins which can be accompanied in particular by a compression effect at the fin type, which has a tendency to curl, and by a tractive force acting on the body of the can at the ends of the longitudinal fins; this last phenomenon can result in a fracturing of the welds at the extremities or of the ends of the cartridge. This report presents first of all the way in which the stress diagram can be drawn for a can touching the fuel, and then the effect of the ratchet along a fin fixed to a bar with or without grooves. Finally the importance is shown of the test cycling variables (temperature, heating and cooling rates). (authors) [French] Les gaines des cartouches combustibles des reacteurs de la filiere graphite-gaz comportent soit des ailettes longitudinales plus ou moins epaisses, soit de courtes ailettes a chevrons, soit un ensemble des deux. Un test important de la tenue des cartouches, est la tenue au cyclage thermique en cellule pour reproduire le comportement en pile. On a observe au cours des cyclages a refroidissement rapide, un raccourcissement a la base des ailettes qui peut s'accompagner notamment d'une mise en compression du sommet de l'ailette qui a tendance a friser, et d'une traction exercee sur le corps des gaines au bout des ailettes longitudinales; ce dernier phenomene peut se traduire par des ruptures de soudures d'extremites ou des parties terminales de la cartouche. Ce rapport presente d'abord la maniere dont peut etre trace le diagramme des contraintes dans une gaine liee au combustible, puis l'effet du rochet le long d

  20. Gestion de l'énergie d'un système hybride pile à combustible/batterie basée sur la commande optimale

    Directory of Open Access Journals (Sweden)

    M. N. SID

    2015-03-01

    Full Text Available Ce papier traite de l'optimisation de gestion de l'énergie électrique dans un véhicule hybride (pile à combustible/batterie, afin de minimiser autant que possible la consommation de l'hydrogène avec le maintien de l'état de charge de la batterie. Premièrement, on présente les sources d'énergies utilisées dans cette étude, la modélisation du système hybride, le choix de type des convertisseurs d'électronique de puissance utilisés et le dimensionnement de ces éléments.Deuxièmement on traite le problème d'optimisation sous contraintes basée sur le principe du minimum de Pontriaguine en introduisant la fonction Hamiltonienne de la commande optimale.Cette stratégie a été évaluée dans un environnement de simulation sous Matlab/Simulink utilisant quatre cycles de conduite standards.Une étude comparative en terme de consommation d'hydrogène a été faite avec deux autres stratégies la première dite thermostat qui est une stratégie très simple basée sur les contraintes imposées par les sources, la seconde approche consiste à utiliser un filtre passe-bas à la sortie de la puissance demandée afin de respecter les contraintes en dynamique sur la source principale. La stratégie traitée présente une bonne amélioration de la consommation d'hydrogène en adoptant une bonne stratégie de gestion de l'énergie électrique dans le système hybride.

  1. Transport of CO2 and other combustion products in soils during slash-pile burns [Presentation

    Science.gov (United States)

    W. J. Massman; M. M. Nobles; G. Butters; S. J. Mooney

    2010-01-01

    The most obvious indication of transport of mass during a fire is flames and smoke. Furthermore it is well known that localized heating during the fire creates 3-D convective currents in the atmosphere and that these currents carry the combustion products away from the fire.

  2. The industrial production of fuel elements; La fabrication en france des elements combustibles

    Energy Technology Data Exchange (ETDEWEB)

    Boussard, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires; Nadal, J [Societe Industrielle de Combustible Nucleaire (SICN), 75 - Paris (France); Pellen, A [Compagnie pour l' Etude et la Realisation de Combustibles Atomiques (CERCA), 75 - Paris (France)

    1964-07-01

    -pool type reactors. The authors show how the problem of the industrial production of rolled fuel elements has been solved in France, and give the three steps involved: 1 - Assembly of the plates made in the U.S.A., 2 - Rolling of the cores made in the U.S.A. to obtain the plates, 3 - Fabrication of the U-Al alloy and production of the cores. They then recall briefly the characteristics of the different fuel elements now in production. A description is given of the various stages of the production including information about the equipment; stress is laid on the extent of the controls carried out at each stage. In conclusion the authors consider the future development of this type of production taking into account the improvements planned and those which are possible. (authors) [French] Les auteurs traitent successivement de la fabrication industrielle des elements combustibles pour reacteurs de puissance de la filiere U naturel graphite-gaz et plus particulierement pour les centrales energetiques d'E.D.F. et de celle des elements combustibles a base d'U enrichi destines aux reacteurs experimentaux du type 'piscine'. 1ere Partie - LES ELEMENTS COMBUSTIBLES AVANCES POUR LES REACTEURS E.D.F.: Apres un bref rappel des caracteristiques des elements combustibles actuellement fabriques industriellement pour les reacteurs de MARCOULE et de CHINON, les auteurs indiquent les differentes etapes suivies pour aboutir au stade de la fabrication industrielle d'un element combustible nouveau, tant en ce qui concerne la gaine et eventuellement la chemise de graphite que le combustible lui-meme. Pour ce qui est de l'elaboration du combustible, ils decrivent les differentes operations en insistant sur les points originaux de la fabrication et de l'appareillage tels que: - coulees en moules chauds, - traitement thermique des alliages U.Mo 1 p. 100, - soudure des pastilles de fermeture des tubes, - gainage - controle aux differents stades. En ce qui concerne la fabrication des gaines, ils

  3. Assessment of End-Plug Welding of Fuel Elements; Evaluation des Soudures Terminales des Elements Combustibles; Otsenka kachestva privarki kontsevoj probki toplivnykh ehlementov; Inspeccion de la Soldadura del Tapon Terminal de los Elementos Combustibles

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Y.; Aoki, T. [Tokai Refinery, Atomic Fuel Corporation (Japan)

    1965-10-15

    It is very important to correlate the testing results with the performance in reactor service, as well as to develop non-destructive testing techniques themselves. However, it is rather difficult to obtain these correlations because of high expense and radioactivity. Several kinds of assessments in out-of-pile state were carried out simulating the in-reactor conditions. Some details of these assessments on JRR-3 fuel elements are described. The reactor is a heavy-water moderated and cooled research reactor of 10-MW capacity, with aluminium-clad metallic uranium fuel elements. As the elements have only mechanical bonding between cladding and core, there might be a tensile stress at the end plug as a result of irradiation growth of the uranium core. Thermal cycling will cause a similar stress in the welds. Preferential corrosion by hot water might occur in the vicinity of the welds because of the difference of micro-structure. It is essential to keep leak-tightness during and after the reactor service. Specially designed specimens were used for tensile testing, high-temperature creep testing, thermal cycling and corrosion testing. Many sorts of weld characters were examined non-destructively before the tests and leak-checked at intervals of the tests. Evaluations of these results may be used for the establishment of inspection standards such as X-ray radiography and visual inspection of the end-plug welding. Some other results on Magnox-clad and Zircaloy clad fuel elements will also be described. (author) [French] Il est tres important de mettre en correlation les resultats d'essais et les performances d'un reacteur en service, et d'ameliorer les methodes d'essais non destructifs. Toutefois, cette correlation est souvent difficile S obtenir du fait des depenses elevees necessaires et de difficultes tenant S la radioactivite. Plusieurs sortes d'evaluations ont ete faites hors pile en simulant les conditions en pile. Le memoire donne certains details des evaluations

  4. Neutron distribution in the central cell and a peripheral cell of the Fontenay-aux-Roses pile; Repartition des neutrons dans la cellule centrale et une cellule peripherique de la pile de Fontenay-aux-Roses

    Energy Technology Data Exchange (ETDEWEB)

    Roullier, F [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1958-07-01

    The distribution of the neutron density has been determined in the central cell and a peripheral cell of the pile at Fontenay-aux-Roses. This measurement was carried out by the autoradiographic method with manganese detectors. The neutron density distribution in the uranium rod has already been studied. The measurement was completed by the study of the neutron density in the complete cell by means of detectors placed in the uranium and in the heavy water. (author) [French] La repartition de la densite des neutrons a ete determinee dans la cellule centrale et une cellule peripherique de la pile de Fontenay-aux-Roses. Cette mesure a ete effectuee par la methode d'autoradiographie avec des detecteurs de manganese. La repartition de la densite des neutrons dans la barre d'uranium a deja ete etudiee. La mesure a ete completee par l'etude de la densite des neutrons dans la cellule complete a l'aide de detecteurs places dans l'uranium et dans l'eau lourde. (auteur)

  5. Combustion chemistry and formation of pollutants; Chimie de la combustion et formation des polluants

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    This book of proceedings reports on 7 papers on combustion chemistry and formation of pollutants presented during the workshop organized by the `Combustion and Flames` section of the French society of thermal engineers. The chemistry of combustion is analyzed in various situations such as: turbojet engines, spark ignition engines, industrial burners, gas turbines etc... Numerical simulation is used to understand the physico-chemical processes involved in combustion, to describe the kinetics of oxidation, combustion and flame propagation, and to predict the formation of pollutants. (J.S.)

  6. Measurement of the in-pile core temperature of an EL-4 pencil element, first charge (can of type-347 stainless steel, 0.4 mm thick, UO{sub 2} fuel, 11 mm diameter). Determination of the apparent thermal conductivity integral of in-pile UO{sub 2}; Mesure de la temperature a coeur en pile d'un crayon EL-4 1er jeu (gaine acier inoxydable, nuance 347 - epaisseur 0,4 mm - combustible UO{sub 2} - diametre 11 mm). Determination de l'integrale de conductibilite thermique apparente de l'UO{sub 2} en pile

    Energy Technology Data Exchange (ETDEWEB)

    Lavaud, B; Ringot, C; Vignesoult, N [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

    1966-11-01

    'un element combustible EL-4, type premier jeu, a gaine en acier inoxydable. On mesure cette temperature au coeur du crayon en pile a l'aide d'un thermocouple pour haute temperature: tungstene-rhenium a gaine tantale. Le crayon est place dans des conditions de fonctionnement analogues a celles de EL-4, tant en ce qui concerne la puissance specifique et la temperature sur gaine que la pression externe sur la gaine. La puissance specifique est obtenue dans le reacteur EL-3 avec un enrichissement de l'UO{sub 2} legerement superieur a celui normalement prevu pour EL-4. La temperature de gaine et la pression visees sont realisees a l'aide d'un conteneur d'irradiation en zircaloy-2 et a remplissage NaK, adapte, aux conditions du reacteur EL-3. - Les temperatures de l'UO{sub 2} a coeur, et de la surface de la gaine etant mesurees; - La puissance etant calculee a partir des echanges thermiques dans le conteneur etalonne en laboratoire; - La chute de temperature au contact UO{sub 2}-gaine etant deduite de mesures faites en laboratoire dans des conditions de flux calorifique comparables et sous une atmosphere de gaz correspondant au debut de la vie de l'element combustible; on peut tracer la courbe integrale de conductibilite. Les examens micro-graphiques de la structure de l'oxyde permettent de verifier la repartition des temperatures dans l'oxyde, deduite de l'integrale de conductibilite thermique. (auteurs)

  7. The fuel cell and the electrical vehicle; La pile a combustible et la voiture electrique

    Energy Technology Data Exchange (ETDEWEB)

    Dubois, J C [Universite Pierre et Marie Curie, 75 - Paris (France)

    1999-01-01

    The fuel cell is an electrochemical generator able to transform directly the chemical energy of a gaseous fuel (hydrogen, natural gas, coke gas or methanol...) with a combustive (oxygen for example) in electricity, heat, water and carbon dioxide. This article briefly describes at first the history of the fuel cell and after its working principle with the main reasons of its present development. Indeed, the fuel cell could be an alternative to the batteries for the electrically powered vehicles but also for other applications demanding autonomous electrical supply. The different types of fuel cells are described with their own performances. The proton exchange membrane fuel cells (PEMFC) are more specially described. Examples of polymer membranes with their performances are given. The different programs in the EC and in the world are described as well as their applications in different domains such as the electrical powered car. (authors) 10 refs.

  8. L'évolution des combustibles pour moteurs thermiques Evolution of Fuels for Thermal Engines

    Directory of Open Access Journals (Sweden)

    Balaceanu J. C.

    2006-11-01

    Full Text Available Depuis la crise pétrolière, l'accroissement des prix et les craintes de pénurie ont conduit à adapter les moteurs aux combustibles disponibles. Si la situation apparaît comme moins tendue, l'industrie des machines thermiques, qui pendant longtemps a eu comme partenaire une industrie du pétrole très sûre, se trouve cependant confrontée à un marché des combustibles incertain dans son ravitaillement et surtout dans ses prix. Les progrès des moteurs diesel et des turbines à gaz, dûs à une meilleure adaptation à leur usage et aussi à l'évolution de la technologie, supposent que les combustibles n'apporteront aucune contrainte majeure en quantité ou en qualité. La modification des usages dévolus désormais au pétrole entraînera une réduction de la coupe lourde et un raffinage plus profond des bruts avec en particulier un développement du craquage catalytique et de la viscoréduction. Or, ces différentes opérations de conversion peuvent conduire à une détérioration de la qualité des combustibles moins grave pour le gazole que pour le fuel lourd. Dans les différents domaines impliqués, les parades technologiques sont en cours de développement. L'industrie des machines thermiques, qui poursuit l'amélioration des engins, et l'industrie du pétrole, qui recherche une réduction des prix des combustibles, sont donc conduites à un compromis optimal auquel elles ne peuvent accéder efficacement qu'en définissant les règles du jeu c'est-à-dire des spécifications internationales rigoureuses des combustibles. Since the oil crisis, the increase in prices and fears of a shortage have led to the adapting of engines to what fuels are available. Whereas the situation now seems somewhat less tense, the thermal machinery industry, which for a long time had a very reliable petroleum industry as its partner, nonetheless finds itself confronted with an uncertain fuel market with regard to supplies and especially to prices. Progress

  9. The reactor Cabri; La pile cabri

    Energy Technology Data Exchange (ETDEWEB)

    Ailloud, J; Millot, J P [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1964-07-01

    programme de travail des premieres annees dans le cadre des objectifs actuellement envisages. Description sommaire de la pile. CABRI est une pile du type piscine a coeur ouvert, sans protection laterale, implantee au Centre d'Etudes Nucleaires de Cadarache dans un batiment renforce et a fuites controlees. Elle est placee au centre d'une zone d'exclusion d'un rayon de 300 m. Les installations de controle et de mesures sont reportees a la peripherie de cette zone. Elle utilise des elements combustibles du type MTR. Les barres de controle-securite sont propulsees a l'air comprime. Le debit maximum du circuit de refroidissement est de 1500 m{sup 3}/h. Les mesures transitoires sont enregistrees dans un ensemble RW 330. Objectifs et programme de travail. CABRI est destinee: - Aux etudes de surete des piles a eau: - pour preciser les marges de securite en fonctionnement: etudes du maximum de puissance auquel il est prudent d'autoriser la marche d'une pile piscine en fonction d'un accident de refroidissement, de l'influence de l'ebullition locale sur le comportement nucleaire de la pile, des performances des instruments de controle et de securite dans des conditions limites... - Etudes experimentales des excursions de puissance liees a des conditions initiales determinees: leur but est de definir les bases de recherches theoriques et les limites au-dela desquelles les risques d'explosion deviennent non negligeables. Ces etudes seront menees de facon a assurer des recoupements avec des experiences hors pile chargees de les prolonger dans le domaine explosif. - Etudes du comportement des appareillages de controle-commande des piles. - Aux etudes experimentales concernant les regimes transitoires a courtes periodes initiales (etude de l'ebullition, mesures de temperature, pression et fraction de vide...) dans le but de definir les bases d'une theorie sur la cinetique des piles a eau liee aux phenomenes de transferts thermiques. - Aux etudes du comportement de combustibles de piles

  10. Contribution to the study of nuclear fuel materials with a metallic uranium base; Contribution a l'etude des materiaux combustibles nucleaires a base d'uranium metallique

    Energy Technology Data Exchange (ETDEWEB)

    Englander, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-11-15

    In a power reactor destined to supply industrially recoverable thermal energy, the most economical source of heat still consists of natural metallic uranium. However, the nuclear fuel material, most often employed in the form of rods of 20 to 40 mm diameter, is subjected to a series of stresses which lead to irreversible distortions usually incompatible with the substructure of the reactor. As a result the fuel material must possess at the outset a certain number of qualities which must be determined. Investigations have therefore been carried out, first on the technological characters peculiar to each of the three allotropic phases of pure uranium metal, and on their interactions on the stabilisation of the material which consists of either cast uranium or uranium pile-treated in the {gamma} phase. (author) [French] Dans un reacteur de puissance destine a fournir de l'energie thermique industriellement recuperable, la source de chaleur la plus economique reste constituee par de l'uranium metallique naturel. Or, le materiau combustible nucleaire, employe le plus souvent sous forme de barreaux de 20 a 40 mm de diametre, se trouve soumis a un ensemble de contraintes qui provoque des deformations irreversibles, le plus souvent incompatibles avec l'infrastructure du reacteur. Par consequent, le materiau combustible doit presenter a l'origine un certain nombre de qualites qu'il est necessaire de determiner. Aussi a-t-on d'abord etudie les caracteres technologiques propres a chacune des trois phases allotropiques de l'uranium-metal pur et leurs interactions sur la stabilisation du materiau constitue soit par de l'uranium coule, soit par de l'uranium traite en pile en phase {gamma}. (auteur)

  11. Fast neutron breeder reactor Rapsodie - situation of physics, hydraulic, thermal and dynamics studies and studies of stability early in 1963; Pile rapide rapsodie - point des etudes neutroniques, hydrauliques, thermiques et dynamiques et des etudes de stabilite au debut de l'annee 1963

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1964-07-01

    ) [French] Au debut de 1963, il a ete necessaire de faire un choix entre les deux combustibles etudies pour Rapsodie: l'alliage UPuMo avec double gainage Nb et acier inoxydable et l'oxyde mixte UO{sub 2}-PuO{sub 2}. Ce rapport donne les resultats des etudes menees avec les deux types de combustible. On rappelle d'abord les differents modeles qui ont ete etudies et on donne une description detaillee de coeurs alliage et oxyde tels qu'ils sont envisages au debut de 1963. On rapporte ensuite les principales caracteristiques neutroniques des deux coeurs: flux et spectre des neutrons, valeur des barres de securite - compensation, economie des neutrons, puissance specifique, fraction effective des neutrons retardes, temps de vie des neutrons prompts, coefficients de reactivite. On decrit les etudes et essais hydrauliques qui ont ete faits a propos de ces deux coeurs. On discute les criteres qui ont ete a l'origine des calculs de debits. On donne les resultats des essais de pertes de charge, de soulevement des assemblages, de vibration et d'ecoulement fin entre les aiguilles. On discute les constantes utilisees pour les calculs thermiques et on donne les temperatures maximales du sodium et des combustibles alliage et oxyde, les majorations dues aux points chauds et la limitation du taux de combustion de l'aiguille oxyde ayant pour origine la pression des gaz de fission. On rapporte les hypotheses qui ont ete utilisees pour les calculs dynamiques et l'on decrit les differents incidents qui ont ete etudies. On donne les resultats des calculs, pour chaque incident et pour chaque combustible et l'on montre que l'on peut eviter la fusion du combustible ou l'ebullition du sodium, meme dans le cas des hypotheses les plus pessimistes, en agissant sur les caracteristiques de la pile (valeur de la barre de pilotage ou puissance de la pile avec un seul circuit de refroidissement). La stabilite de la pile a ete evaluee avec les hypotheses utilisees pour les calculs dynamiques, a l

  12. Large eddy simulation and combustion instabilities; Simulation des grandes echelles et instabilites de combustion

    Energy Technology Data Exchange (ETDEWEB)

    Lartigue, G.

    2004-11-15

    The new european laws on pollutants emission impose more and more constraints to motorists. This is particularly true for gas turbines manufacturers, that must design motors operating with very fuel-lean mixtures. Doing so, pollutants formation is significantly reduced but the problem of combustion stability arises. Actually, combustion regimes that have a large excess of air are naturally more sensitive to combustion instabilities. Numerical predictions of these instabilities is thus a key issue for many industrial involved in energy production. This thesis work tries to show that recent numerical tools are now able to predict these combustion instabilities. Particularly, the Large Eddy Simulation method, when implemented in a compressible CFD code, is able to take into account the main processes involved in combustion instabilities, such as acoustics and flame/vortex interaction. This work describes a new formulation of a Large Eddy Simulation numerical code that enables to take into account very precisely thermodynamics and chemistry, that are essential in combustion phenomena. A validation of this work will be presented in a complex geometry (the PRECCINSTA burner). Our numerical results will be successfully compared with experimental data gathered at DLR Stuttgart (Germany). Moreover, a detailed analysis of the acoustics in this configuration will be presented, as well as its interaction with the combustion. For this acoustics analysis, another CERFACS code has been extensively used, the Helmholtz solver AVSP. (author)

  13. Simulation of power excursions - Osiris reactor; Simulation des excursions de puissance - pile Osiris

    Energy Technology Data Exchange (ETDEWEB)

    Pascouet, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    Following the experimental work accomplished in the U.S.A. on Borax 1 and SPERT 1 and the accident of SL 1, the 'Commissariat a l'Energie Atomique' started a research program about the safety of its own swimming Pool reactors, with regard to power excursions. The first research work led to the design of programmed explosive charges, adapted to the simulation of a power excursion. This report describes the application of these methods to the investigation of Osiris safety. (author) [French] A la suite des essais effectues aux U.S.A. sur BORAX 1 et SPERT 1 et de l'accident survenu a SL 1, le Commissariat a l'Energie Atomique a lance un programme d'etudes sur la surete de ses reacteurs piscines vis-a-vis des excursions de puissance. Les premieres etudes ont abouti A la mise au point de charges programmees capables de simuler une excursion de puissance. On trouvera dans le present rapport l'application de ces methodes a l'etude de la surete d'OSIRIS. (auteur)

  14. A study of some radioprotection apparatuses used in the case of pool reactors; Etude de quelques dispositifs de radioprotection en service aupres des piles piscines

    Energy Technology Data Exchange (ETDEWEB)

    Robien, E de; Choudens, H de; Delpuech, J [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1965-07-01

    Various problems of radioprotection concerning swimming-pool reactors in Grenoble have led us to study adequate solutions: a) The automatic verification of the staff-radioactivity when coming out of Melusine or Siloe has been realized thanks to a {beta}{gamma} gate which is insensitive to the ambient background in the reactor-hall; b) The automatic verification of the contamination of the shoes of the agents working in these reactors has been realized with a dedicated device; c) The necessity to measure precisely {gamma} doses with the help of an autonomous apparatus has led to the making of a plastic-scintillator {gamma} dosimeter; d) The obligation to forbid the opening of doors in some places where there might be a great intensity of radiation, has led us to make doors open according to the intensity of radiation inside the rooms; e) The releases of radioactive iodine have been measured with activated charcoal cartridges that surround a scintillator connected with a unique channel selector; f) Finally the control of reactor safety rod fall in case of a radioactive accident has been secured by a chain whose detector is a chamber immersed in the swimming-pool, which offers, in the particular case of the hot thickness swimming-pool reactor a double advantage: first it enables us to regulate the upper hot water layer, second to get free of transitory radiations which appear in the reactor hall as the experimental apparatuses are taken out from the core. (authors) [French] Differents problemes de radioprotection se posant aupres des piles piscines de Grenoble, ils ont necessite l'etude de solutions particulieres: a) le controle automatique de la radioactivite du personnel sortant de Melusine ou de Siloe a ete realise a l'aide d'un portique {beta}{gamma} insensible au bruit de fond ambiant du hall des piles; b) le controle automatique de la contamination des souliers des agents travaillant dans ces piles a ete realise par une passerelle pieds {beta}{gamma}; c) la

  15. Properties of low content uranium-molybdenum alloys which may be used as nuclear fuels; Proprietes des alliages uranium-molybdene de faibles teneurs utilisables comme materiaux combustibles

    Energy Technology Data Exchange (ETDEWEB)

    Lehmann, J; Decours, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    sont presentees les caracteristiques metallurgiques des alliages uranium-molybdene de teneurs comprises entre 0,5 et 3 pour cent en poids de molybdene. Certains de ces alliages etant utilises dans les piles de puissance EdF, nous indiquons brievement les conditions de fonctionnement demandees aux materiaux combustibles: temperature maximum, gradient de temperature et pression externe. Dans une premiere partie sont etudiees les proprietes structurales des alliages en correlation avec les cinetiques des transformations de phases, nous decrivons les incidences de differents facteurs physico-metallurgiques sur la morphologie et sur la structure cristalline des materiaux: - conditions de solidification et heredite de la structure {gamma}, - vitesse de refroidissement au passage des points de transformation - suppression ou non de la transformation intermediaire {gamma} {yields} {beta} Dans une seconde partie, nous indiquons comment la connaissance des processus des transformations de phase a permis de definir les conditions d'elaboration optimales de ces materiaux sous forme de tubes de combustibles destines aux reacteurs EdF: conditions de coulee traitement de refroidissement controle, soudabilite. Dans une troisieme partie, nous etudions la stabilite thermique au cours de paliers de longue duree a haute temperature et de cycles, dans les deux domaines du diagramme d'equilibre {alpha} + {gamma}, {beta} + {gamma}; les influences de la morphologie (en particulier des deux types de pseudo-grains {alpha} observes) et de la vitesse de refroidissement lors du passage des points de transformation sont discutees. Dans une quatrieme partie, les proprietes mecaniques sont discutees resistance a la traction, resistance au fluage, resilience. Ces proprietes peuvent etre egalement influencees par l'heredite de la structure {gamma} et par la vitesse de refroidissement subie par l'alliage. En conclusion, nous developpons les raisons qui ont motive le choix de certains de ces alliages

  16. The pile EL3; Pile EL3

    Energy Technology Data Exchange (ETDEWEB)

    Robert, J.; Raievski, V. [Commissariat a l' Energie Atomique, Paris (France). Centre d' Etudes Nucleaires; Hainzelin, J. [Chantiers de l' Atlantique (Penhoet-Loire), 75 - Paris (France)

    1959-07-01

    The programme of the high flux laboratory pile EL3 was laid down in october 1954. It is a heavy-water moderated and cooled pile. The fuel rods are of uranium metal with 1.6 per cent - 2 per cent of molybdenum, with aluminium canning. The maximum thermal flux in the moderator is 10{sup 14} n/cm{sup 2}/s. Studies began in january 1955, construction in may 1955, and the first divergence took place in July 1957. This report gives a general description of the pile and its adjacent buildings, the physical study of the pile, and certain technological studies carried out for the construction of EL3. (author) [French] Le programme de la pile laboratoire a haut flux EL3, a ete fixe en octobre 1954. C'est une pile moderee et refroidie a l'eau lourde. Les barres de combustible sont en uranium metal a 1,6 pour cent - 2 pour cent de molybdene, gainees a l'aluminium. Le flux thermique maximum dans le moderateur est de 10{sup 14} n/cm{sup 2}/s. Les etudes ont commence en janvier 1955, la construction en mai 1955, la premiere divergence a eu lieu en juillet 1957. On trouvera dans ce rapport, une description generale de la pile et de ses batiments annexes, l'etude physique de la pile et un certain nombre d'etudes technologiques executees pour la construction d'EL3. (auteur)

  17. The pile EL3; Pile EL3

    Energy Technology Data Exchange (ETDEWEB)

    Robert, J; Raievski, V [Commissariat a l' Energie Atomique, Paris (France). Centre d' Etudes Nucleaires; Hainzelin, J [Chantiers de l' Atlantique (Penhoet-Loire), 75 - Paris (France)

    1959-07-01

    The programme of the high flux laboratory pile EL3 was laid down in october 1954. It is a heavy-water moderated and cooled pile. The fuel rods are of uranium metal with 1.6 per cent - 2 per cent of molybdenum, with aluminium canning. The maximum thermal flux in the moderator is 10{sup 14} n/cm{sup 2}/s. Studies began in january 1955, construction in may 1955, and the first divergence took place in July 1957. This report gives a general description of the pile and its adjacent buildings, the physical study of the pile, and certain technological studies carried out for the construction of EL3. (author) [French] Le programme de la pile laboratoire a haut flux EL3, a ete fixe en octobre 1954. C'est une pile moderee et refroidie a l'eau lourde. Les barres de combustible sont en uranium metal a 1,6 pour cent - 2 pour cent de molybdene, gainees a l'aluminium. Le flux thermique maximum dans le moderateur est de 10{sup 14} n/cm{sup 2}/s. Les etudes ont commence en janvier 1955, la construction en mai 1955, la premiere divergence a eu lieu en juillet 1957. On trouvera dans ce rapport, une description generale de la pile et de ses batiments annexes, l'etude physique de la pile et un certain nombre d'etudes technologiques executees pour la construction d'EL3. (auteur)

  18. Starting up a programme of atomic piles using compressed gas; Le demarrage d'un programme de piles atomiques a gaz comprime

    Energy Technology Data Exchange (ETDEWEB)

    Horowitz, J; Yvon, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1959-07-01

    1) An examination of the intellectual and material resources which have directed the French programme towards: a) the natural uranium and plutonium system, b) the use of compressed gas as heat transfer fluid (primary fluid). 2) The parts played in exploring the field by the pile EL2 and G1, EL2 a natural uranium, heavy water and compressed gas pile, G1 a natural uranium, graphite and atmospheric air pile. 3) Development of the neutronics of graphite piles: physical study of G1. 4) The examination of certain problem posed by centres equipped with natural uranium, graphite and compressed carbon dioxide piles: structure, special materials, fluid circuits, maximum efficiency. Economic aspects. 5) Aids to progress: a) piles for testing materials and for tests on canned fuel elements, b) laboratory and calculation facilities. 6) Possible new orientations of compressed gas piles: a) raising of the pressure, b) enriched fuel, c) higher temperatures, d) use of heavy water. (author) [French] 1) Examen des ressources - intellectuelles et materielles - qui ont oriente le programme fran is vers: a) la voie de l'uranium naturel et du plutonium; b) l'emploi comme fluide pour le transfert de la chaleur (fluide primaire) d'un gaz comprime. 2) Le role d'exploration des piles EL2 et G1, EL2 pile a uranium naturel, eau lourde et gaz comprime, G1 pile a uranium naturel, graphite et air atmospherique. 3) Developpement de la neutronique des piles a graphite: l'etude physique de G1. 4) Examen de certains problemes poses par les centrales equipees de piles a uranium naturel, graphite et gaz carbonique comprime: structure, materiaux speciaux, circuits de fluides, optimisation. Aspects economiques. 5) Les auxiliaires du progres: a) piles pour essai de materiaux et pour essais de cartouches, b) moyens de laboratoire et moyens de calcul. 6) Orientations nouvelles possibles des piles a gaz comprime: a) elevation de la pression, b) combustible enrichi, c) temperatures elevees, d) emploi de l

  19. Swimming-pool piles; Piles piscines

    Energy Technology Data Exchange (ETDEWEB)

    Trioulaire, M [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    In France two swimming-pool piles, Melusine and Triton, have just been set in operation. The swimming-pool pile is the ideal research tool for neutron fluxes of the order of 10{sup 13}. This type of pile can be of immediate interest to many research centres, but its cost must be reduced and a break with tradition should be observed in its design. It would be an advantage: - to bury the swimming-pool; - to reject the experimental channel; - to concentrate the cooling circuit in the swimming-pool; - to carry out all manipulations in the water; - to double the core. (author) [French] En France, deux piles piscines, Melusine et Triton, viennent d'entrer en service. La pile piscine est l'outil de recherche ideal pour des flux de neutrons de l'ordre de 10{sup 13}. Ce type de pile peut interesser des maintenant de nombreux centres de recherches mais il faut reduire son prix de revient et rompre avec le conformisme de sa conception. Il y a avantage: - a enterrer la piscine; - a supprimer les canaux experimentaux; - a concentrer le circuit de refrigeration dans la piscine; - a effectuer toutes les manipulations dans l'eau; - a doubler le coeur. (auteur)

  20. Optimal sizes and siting of nuclear fuel reprocessing plants; Tailles et localisations optimales des usines de retraitement des combustibles nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Thiriet, L; Deledicq, A [Commissariat a l' Energie Atomique, Siege (France). Centre d' Etudes Nucleaires

    1967-07-01

    The expansion of a nuclear economy entails the development of fuel process and reprocessing plant programmes. The model proposed makes it possible to select the size, the site and the start-up schedule of the plants in such a way as to minimize the total freight and reprocessing costs. As an illustration, we have approached the problem of burnt natural uranium processing plants related to natural uranium-graphite as nuclear power stations. The sites and annual output of the reactors, the possible plant sites and cost functions (freight and reprocessing) are supposed to be known. The method consists in first approaching the process plant problem as a Dynamic Programming problem, increasing programme slices (total reactor output) being explored sequentially. When the quantities of burnt natural uranium to be reprocessed are fixed, the minimization of the transport cost is then also carried out as a dynamic programming problem. The neighbourhood of the optimum process cost is explored in order to find the minimum summation of a suboptimal processing cost and corresponding optimal transport cost. As the reprocessing problem can be represented on a sequential graph, in order to compute the sub-optima, we developed and used a 'reflexion algorithm'. The method can be interpreted as a general mechanism for determining the optimum when to a sequential dynamic problem (for example an equipment programme) is added a complementary problem (transport, for instance). It also makes it possible to estimate the economic losses which result from the choice of a non optimal policy for other than economic reasons. (author) [French] L'expansion de l'economie nucleaire se traduit par un developpement des programmes d'usines d'elaboration et de retraitement des combustibles. Le modele propose permet de choisir la taille, la localisation et la cadence de mise en service des usines de maniere a minimiser le total des frais de transport et de retraitement. A titre d'exemple nous avons

  1. Dosimetry techniques of thermal neutrons and {gamma} radiation in reactor cores; Techniques de dosimetrie des neutrons thermiques et du rayonnement {gamma} dans les piles

    Energy Technology Data Exchange (ETDEWEB)

    Sutton, J; Draganic, I; Hering, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-07-01

    Chemical studies under radiation done in the reactor cores require to be followed by dosimetry. When the irradiations are done in the reflector, one can limit to the measure of the {gamma} and the neutron radiation. For the dosimetry of the {gamma} radiation, a dosimeter of ferrous sulfate is convenient until doses of about 10{sup 6} rep. The use of aired oxalic acid solutions permits to reach 10{sup 7} rep. The dosimetry of thermal neutrons has been made with solutions of cobalt sulphate or paper filter impregnated with this salt. The total chemical effect of the {gamma} and of the slow neutrons radiation is obtained with solutions of ferrous sulfate added with lithium sulphate. (M.B.) [French] Les etudes de chimie sous radiation faites dans les piles exigent d'etre suivies par dosimetrie. Lorsque les irradiations sont effectues dans le reflecteur, on peut se limiter a doser le rayonnement {gamma} et les neutrons. Pour la dosimetrie du rayonnement {gamma}, un dosimetre a sulfate ferreux convient jusqu'a des doses d'environ 10{sup 6} rep. L'emploi de solutions aerees d'acide oxalique permet d'atteindre 10{sup 7} rep. La dosimetrie des neutrons thermiques a ete faite avec des solutions de sulfate de cotalt ou du papier filtre impregne de ce sel. L'effet chimique total du rayonnement {gamma} et des neutrons lents est obtenu avec des solutions de sulfate ferreux additionne de sulfate de lithium. (M.B.)

  2. New results concerning the behaviour of fission gases in in-pile UO{sub 2} at high temperatures; Resultats nouveaux sur le comportement des gaz de fission a haute temperature dans l'UO{sub 2} en pile

    Energy Technology Data Exchange (ETDEWEB)

    Soulhier, R; Schurenkamper, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The authors consider in the first part the various phenomena giving rise to the production of fission gases towards the exterior of nuclear fuels. The following aspects are dealt with: diffusion, for which is considered the influence of the predecessors of the radioactive gases, the fission recoil, atom expulsion along the fission paths and the evaporation. In the second part the authors present the results obtained on UO{sub 2} samples subjected to irradiation at temperatures of between 150 and 2000 deg C: - At low temperatures the variation of the amount produced as a function of the half-life of the isotopes studied shows that recoil is hot the only cause of gas production. - Above 1800 deg C, a weight loss by evaporation has been observed and the influence of this phenomenon on gas liberation has been studied; thus the fraction of {sup 135}Xe liberated at 2000 deg C by processes other than evaporation is of the order of 10 per cent. - The influence of the various mechanism on the overall effect as a function of temperature is discussed. (authors) [French] Dans une premiere partie, les auteurs etudient les differents phenomenes pouvant donner lieu au degagement des gaz de fission hors d'un combustible. Sont traites successivement: la diffusion, pour laquelle on discute l'influence des predecesseurs des gaz radioactifs, le recul de fission, l'expulsion des atomes le long des trajets de fission et l'evaporation. Dans une deuxieme partie ils exposent les resultats obtenus sur des echantillons d'UO{sub 2} portes sous irradiation a des temperatures comprises entre 150 deg C et 2000 deg C: - A basse temperature la variation de la quantite degagee suivant la periode des isotopes etudies montre que le recul n'est pas la seule cause du degagement des gaz. - Au-dessus de 1800 deg C on a note une perte de poids par evaporation et on a evalue l'influence de ce phenomene sur la liberation des gaz: ainsi la fraction du {sup 135}Xe liberee a 2000 deg C par d'autres processus

  3. Récupération du platine contenu dans les piles à combustible basse température par voie hydrométallurgique Platinum Recovery from used PEMFC by hydrometallurgy

    Directory of Open Access Journals (Sweden)

    Vincent Denis

    2013-11-01

    Full Text Available La récupération du platine contenu dans la couche catalytique des piles à combustible est nécessaire pour viabiliser cette technologie vers le secteur industriel. Dans cette étude la voie purement hydrométallurgique a été privilégiée au procédé de récupération pyrométallurgique, évitant la destruction des autres constituants de la pile (membrane, … et limitant la formation de gaz toxique. Le procédé mise en œuvre est constitué d'une étape de lixiviation à partir d'un mélange HCl/HNO3, suivie par la précipitation d'un sel de platine (NH42PtCl6 pouvant soit servir à la synthèse d'un nouveau catalyseur soit à l'obtention de platine métallique. Sur l'ensemble de la chaîne un rendement de récupération de plus de 80 % a pu être obtenu mettant en avant le potentiel de cette stratégie. The recovery of platinum in the catalyst layers of PEMFCs (proton exchange membrane fuel cells is required to allow a transfer in industry. In this study, hydrometallurgical route was preferred to pyrometallurgical process, reducing both the destruction of the other components of the cell (membrane, … and the formation of hazardous gas. In this work, the process includes a leaching step from a diluted aqua regia solution, followed by a precipitation step of platinum under the (NH42PtCl6 form. This salt can be used either for the synthesis of a new catalyst or to obtain a metallic platinum. Considering these steps the recovery efficiency has been found to be over 80 %, which bring out the potential of this strategy.

  4. The reprocessing of irradiated fuels improvement and extension of the solvent extraction process; Le traitement des combustibles irradies amelioration et extension du procede utilisant les solvants

    Energy Technology Data Exchange (ETDEWEB)

    Faugeras, P; Chesne, A [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    . Le traitement au solvant est egalement utilise pour les combustibles de la pile convertisseuse du plutonium (Rapsodie). On expose et commente le schema du traitement, les premiers resultats experimentaux et le projet d'une installation pilote de 1 kg/jour. L'utilisation de la tn-laurylamine dans le cycle de purification du plutonium est envisagee dans l'usine de traitement de La Hague. On presente le schema adopte et les performances du procede. On envisage la vitrification comme traitement definitif des dechets radioactifs concentres des Centres de Marcoule (uranium-irradie) et La Hague (uranium-molybdene irradie). Trois procedes possibles sont decrits et commentes, ainsi que les resultats d'exploitation des installations correspondantes sur elements traceurs. (auteurs)

  5. The development of an electrically compensated differential calorimeter for the measurement of in-pile heat evolution (1962); Etude et realisation d'un calorimetre differentiel a compensation electrique pour la mesure des echaufpements en pile (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Ayela, F; Derrien, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    It has been possible with the calorimeter of which we give the principle and details in the present report, to determine the calorific power produced by nuclear radiation in a given sample using simple electrical measurement. It also renders unnecessary all absolute measurements of temperature, all possible calibration, and the use of the thermal or thermoelectric constants of the constituent elements. The possible uses of the apparatus are fairly varied, as shown by the first in-pile experiments which we have carried out and for which we give results. (authors) [French] Le calorimetre, dont nous decrivons le principe et les details dans le present rapport, nous permet de determiner, par de simples mesures electriques, la puissance calorifique liberee par les rayonnements nucleaires dans un echantillon donne. Il nous affranchit aussi, de toute mesure absolue de temperature, de tout etalonnage prealable, et de l'utilisation des constantes thermiques ou thermoelectriques de ses elements constitutifs. Les possibilites d'emploi de l'appareil sont assez variees comme nous le montrent les premiers essais que nous avons effectues en pile et dont nous donnons les resultats. (auteurs)

  6. Radio-active pollution near natural uranium-graphite-gas reactors; La pollution radioactive aupres des piles uranium naturel - graphite - gaz

    Energy Technology Data Exchange (ETDEWEB)

    Chassany, J.; Pouthier, J.; Delmar, J. [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

    1967-07-01

    The results of numerous evaluations of the contamination are given: - Reactors in operation during maintenance operations. - Reactors shut-down during typical repair operations (coolants, exchangers, interior of the vessel, etc. ) - Following incidents on the cooling circuit and can-rupture. They show that, except in particular cases, it is the activation products which dominate. Furthermore, after ten years operation, the points at which contamination liable to emit strong doses accumulates are very localized and the individual protective equipment has not had to be reinforced. (authors) [French] Les resultats de nombreuses evaluations de la contamination sont donnes: - Piles en marche pendant les operations d'entretien - Piles a l'arret au cours des chantiers caracteristiques (refrigerants, echangeurs, interieur du caisson, etc.) - A la suite d'incidents sur le circuit de refroidissement et de rupture de gaine. Ils montrent que, sauf cas particulier, ce sont essentiellement les produits d'activation qui dominent. Par ailleurs apres 10 ans de fonctionnement, les points d'accumulation de la contamination susceptibles de delivrer des debits de dose importants restent tres localises et les moyens de protection individuels utilises n'ont pas du etre renforces. (auteurs)

  7. Radio-active pollution near natural uranium-graphite-gas reactors; La pollution radioactive aupres des piles uranium naturel - graphite - gaz

    Energy Technology Data Exchange (ETDEWEB)

    Chassany, J; Pouthier, J; Delmar, J [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

    1967-07-01

    The results of numerous evaluations of the contamination are given: - Reactors in operation during maintenance operations. - Reactors shut-down during typical repair operations (coolants, exchangers, interior of the vessel, etc. ) - Following incidents on the cooling circuit and can-rupture. They show that, except in particular cases, it is the activation products which dominate. Furthermore, after ten years operation, the points at which contamination liable to emit strong doses accumulates are very localized and the individual protective equipment has not had to be reinforced. (authors) [French] Les resultats de nombreuses evaluations de la contamination sont donnes: - Piles en marche pendant les operations d'entretien - Piles a l'arret au cours des chantiers caracteristiques (refrigerants, echangeurs, interieur du caisson, etc.) - A la suite d'incidents sur le circuit de refroidissement et de rupture de gaine. Ils montrent que, sauf cas particulier, ce sont essentiellement les produits d'activation qui dominent. Par ailleurs apres 10 ans de fonctionnement, les points d'accumulation de la contamination susceptibles de delivrer des debits de dose importants restent tres localises et les moyens de protection individuels utilises n'ont pas du etre renforces. (auteurs)

  8. Measurement of the temperature of the neutrons in reactor G1; Mesure de la temperature des neutrons dans la pile G1

    Energy Technology Data Exchange (ETDEWEB)

    Raievski, V; Sautiez, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    A precise experimental method has been adapted to the analysis of the spectrum of neutrons in the thermal region. This method uses the technique of modulation applied to a beam of neutrons issuing from a characteristic point in the pile. The analysis of the spectrum is made by adjusting, by the method of least squares, an analytical form to the experimental results. In this report are given the results obtained with a beam from the centre of the moderator of G1. The spectrum of this beam essentially represents the spectrum of the neutrons in the moderator. The most probable velocity was determined by means of Maxwell's functions. The measurements were made of different moderator temperatures between 304 deg. K and 435 deg. K. (author) [French] Une methode experimentale precise a ete mise au point pour l'analyse du spectre des neutrons dans le domaine thermique. Cette methode utilise la technique de la modulation appliquee a un faisceau de neutrons issu d'un point caracteristique de la pile. L'analyse du spectre est faite en ajustant par la methode des moindres carres une forme analytique aux resultats experimentaux. Dans ce rapport, on donne les resultats obtenus sur un faisceau du centre du moderateur de G1. Le spectre de ce faisceau represente convenablement le spectre des neutrons dans le moderateur. On s'est limite ici a une fonction de Maxwell dont on a recherche la vitesse la plus probable. Les mesures ont ete faites avec une temperature du moderateur variant entre 304 deg. K et 435 deg. K. (auteur)

  9. The reactor Cabri; La pile cabri

    Energy Technology Data Exchange (ETDEWEB)

    Ailloud, J.; Millot, J.P. [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1964-07-01

    description sommaire de la pile et decrit le programme de travail des premieres annees dans le cadre des objectifs actuellement envisages. Description sommaire de la pile. CABRI est une pile du type piscine a coeur ouvert, sans protection laterale, implantee au Centre d'Etudes Nucleaires de Cadarache dans un batiment renforce et a fuites controlees. Elle est placee au centre d'une zone d'exclusion d'un rayon de 300 m. Les installations de controle et de mesures sont reportees a la peripherie de cette zone. Elle utilise des elements combustibles du type MTR. Les barres de controle-securite sont propulsees a l'air comprime. Le debit maximum du circuit de refroidissement est de 1500 m{sup 3}/h. Les mesures transitoires sont enregistrees dans un ensemble RW 330. Objectifs et programme de travail. CABRI est destinee: - Aux etudes de surete des piles a eau: - pour preciser les marges de securite en fonctionnement: etudes du maximum de puissance auquel il est prudent d'autoriser la marche d'une pile piscine en fonction d'un accident de refroidissement, de l'influence de l'ebullition locale sur le comportement nucleaire de la pile, des performances des instruments de controle et de securite dans des conditions limites... - Etudes experimentales des excursions de puissance liees a des conditions initiales determinees: leur but est de definir les bases de recherches theoriques et les limites au-dela desquelles les risques d'explosion deviennent non negligeables. Ces etudes seront menees de facon a assurer des recoupements avec des experiences hors pile chargees de les prolonger dans le domaine explosif. - Etudes du comportement des appareillages de controle-commande des piles. - Aux etudes experimentales concernant les regimes transitoires a courtes periodes initiales (etude de l'ebullition, mesures de temperature, pression et fraction de vide...) dans le but de definir les bases d'une theorie sur la cinetique des piles a

  10. Reactor AQUILON. The hardening of neutron spectrum in natural uranium rods, with a computation of epithermal fissions (1961); Pile AQUILON. Durcissement du spectre des neutrons dans les barreaux d'uranium et calcul des fissions epithermiques (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Durand -Smet, R; Lourme, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    - Microscopic flux measurements in reactor Aquilon have allowed to investigate the thermal and epithermal flux distribution in natural uranium rods, then to obtain the neutron spectrum variations in uranium, Wescott '{beta}' term of the average spectrum in the rod, and the ratio of epithermal to therma fissions. A new definition for the infinite multiplication factor is proposed in annex, which takes into account epithermal parameters. (authors) [French] - Un certain nombre de mesures effectuees dans la pile Aquilon ont permis d'etablir la distribution fine des flux thermique et epithermique dans les barreaux d'uranium, et d'en deduire les variations du spectre des neutrons dans l'uranium, le terme {beta} du spectre de Wescott moyen dans le barreau et le nombre de fissions epithermiques. En annexe, il est propose une definition nouvelle du coefficient de multiplication infini, qui fait intervenir les parametres epithermiques. (auteurs)

  11. Les méthodes thermiques de production des hydrocarbures. Chapitre 5 : Combustion "in situ". Pricipes et études de laboratoire Thermal Methods of Hydrocarbon Production. Chapter 5 : "In Situ" Combustion. Principles and Laboratory Research

    Directory of Open Access Journals (Sweden)

    Burger J.

    2006-11-01

    Full Text Available II existe plusieurs variantes de la combustion in situ, suivant le sens de déplacement du front de combustion, à co-courant ou à contre-courant, et suivant la nature des fluides injectés, air seul ou injection combinée d'air et d'eau. Les réactions de pyrolyse, d'oxydation et de combustion mises en jeu par ces techniques sont discutées, en particulier la cinétique des principaux mécanismes réactionnels, l'importance du dépôt de coke et l'exothermicité des réactions d'oxydation et de combustion. Les résultats d'essais de déplacement unidirectionnel du front de combustion dans des cellules de laboratoire sont présentés et discutés. Enfin on indique les conditions pratiques d'application des méthodes de combustion in situ sur champ. Possible variations of in situ combustion technique ore as follows : forward or reverse combustion depending on the relative directions of the air flow and the combustion front, dry combustion if air is the only fluid injected into the oil-bearing formation, or fixe/woter flooding if water is injected along with air. The chemical reactions of pyrolysis, oxidation and combustion involved in these processes are described. The kinetics of these reactions is discussed as well as fuel availability in forward combustion and the exothermicity of the oxidation and combustion reactions. The results obtained in the laboratory when a combustion front propagates in unidirectional adiabatic tells are described and discussed. This type of experimentation provides extensive information on the characteristics of the processes. Screening criteria for the practical application of in situ combustion techniques are presented.

  12. Calculation of the working capital invested in fuel cycles and its interest charges (1963); Calcul des immobilisations financieres des cycles de combustible (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Gaussens, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    All the processes undergone by the nuclear material, including the various steps of fuel element manufacturing and of irradiated fuel reprocessing lead to working capital investments varying with the type of reactor, that must be taken into account in the kWh cost calculation. The author deals with a calculation method called: 'present worth method' and gives some examples concerning reactors the main fuel of which being either natural uranium or enriched uranium or plutonium. He especially points out the importance these investments may take in the case of fast breeder reactors. (author) [French] L'ensemble des etapes parcourues par la matiere fissile comprenant les divers stades d'elaboration des elements combustibles et de leur traitement apres irradiation, implique des immobilisations financieres tres differentes d'un type de reacteur a l'autre, dont il convient de tenir compte dans le calcul du cout du kWh. L'auteur expose une methode de calcul dite 'd'actualisation des couts' et donne quelques exemples relatifs aux reacteurs utilisant l'uranium naturel, l'uranium enrichi et le plutonium comme combustible principal. Il montre en particulier l'importance que peuvent avoir ces immobilisations dans le cas des reacteurs surregenerateurs. (auteur)

  13. Use of tri-laurylamine during the retreatment of irradiated fuels; Utilisation de la trilaurylamine au retraitement des combustibles irradies

    Energy Technology Data Exchange (ETDEWEB)

    Bathellier, A; Koehly, G; Perez, J J; Chesne, A [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    The purification of aqueous solutions of plutonium can be made by extraction of the Pu (IV) nitrate complex using trilaurylamine in dodecane. The principal physical properties of this solution are considered along with its extractive properties and the influence of foreign ions on the extraction. The application of this method of extraction in a processing cycle for irradiated material is proposed: either for a final purification process or for auxiliary cycles for recovering plutonium from metal production wastes, oxalate precipitation supernatants, or any general aqueous plutonium waste solution. Also proposed are clean-up procedures for regeneration of an extractive solution which has undergone chemical or radiolytic degradation. (authors) [French] La purification du plutonium contenu dans des solutions aqueuses peut etre effectuee par extraction du nitrate de l'ion tetravalent par la trilaurylamine diluee dans du dodecane. Les principales proprietes physiques de ce solvant sont passees en revue ainsi que ses proprietes extractives et l'influence des ions etrangers sur celles-ci. L'application de cette methode d'extraction dans le cycle de traitement des combustibles irradies est envisagee: soit dans le traitement de purification finale, soit dans les cycles annexes ayant trait a la recuperation de plutonium a partir des scories d'elaboration du metal, des eaux-meres oxaliques et d'une facon generale des solutions aqueuses contenant du plutonium. Des traitements de regeneration du solvant ayant subi des degradations chimique ou radiolytique, sont proposes. (auteurs)

  14. Use of tri-laurylamine during the retreatment of irradiated fuels; Utilisation de la trilaurylamine au retraitement des combustibles irradies

    Energy Technology Data Exchange (ETDEWEB)

    Bathellier, A.; Koehly, G.; Perez, J.J.; Chesne, A. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    The purification of aqueous solutions of plutonium can be made by extraction of the Pu (IV) nitrate complex using trilaurylamine in dodecane. The principal physical properties of this solution are considered along with its extractive properties and the influence of foreign ions on the extraction. The application of this method of extraction in a processing cycle for irradiated material is proposed: either for a final purification process or for auxiliary cycles for recovering plutonium from metal production wastes, oxalate precipitation supernatants, or any general aqueous plutonium waste solution. Also proposed are clean-up procedures for regeneration of an extractive solution which has undergone chemical or radiolytic degradation. (authors) [French] La purification du plutonium contenu dans des solutions aqueuses peut etre effectuee par extraction du nitrate de l'ion tetravalent par la trilaurylamine diluee dans du dodecane. Les principales proprietes physiques de ce solvant sont passees en revue ainsi que ses proprietes extractives et l'influence des ions etrangers sur celles-ci. L'application de cette methode d'extraction dans le cycle de traitement des combustibles irradies est envisagee: soit dans le traitement de purification finale, soit dans les cycles annexes ayant trait a la recuperation de plutonium a partir des scories d'elaboration du metal, des eaux-meres oxaliques et d'une facon generale des solutions aqueuses contenant du plutonium. Des traitements de regeneration du solvant ayant subi des degradations chimique ou radiolytique, sont proposes. (auteurs)

  15. Contribution to the study of nuclear fuel materials with a metallic uranium base; Contribution a l'etude des materiaux combustibles nucleaires a base d'uranium metallique

    Energy Technology Data Exchange (ETDEWEB)

    Englander, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-11-15

    In a power reactor destined to supply industrially recoverable thermal energy, the most economical source of heat still consists of natural metallic uranium. However, the nuclear fuel material, most often employed in the form of rods of 20 to 40 mm diameter, is subjected to a series of stresses which lead to irreversible distortions usually incompatible with the substructure of the reactor. As a result the fuel material must possess at the outset a certain number of qualities which must be determined. Investigations have therefore been carried out, first on the technological characters peculiar to each of the three allotropic phases of pure uranium metal, and on their interactions on the stabilisation of the material which consists of either cast uranium or uranium pile-treated in the {gamma} phase. (author) [French] Dans un reacteur de puissance destine a fournir de l'energie thermique industriellement recuperable, la source de chaleur la plus economique reste constituee par de l'uranium metallique naturel. Or, le materiau combustible nucleaire, employe le plus souvent sous forme de barreaux de 20 a 40 mm de diametre, se trouve soumis a un ensemble de contraintes qui provoque des deformations irreversibles, le plus souvent incompatibles avec l'infrastructure du reacteur. Par consequent, le materiau combustible doit presenter a l'origine un certain nombre de qualites qu'il est necessaire de determiner. Aussi a-t-on d'abord etudie les caracteres technologiques propres a chacune des trois phases allotropiques de l'uranium-metal pur et leurs interactions sur la stabilisation du materiau constitue soit par de l'uranium coule, soit par de l'uranium traite en pile en phase {gamma}. (auteur)

  16. Burnup determination of power reactor fuel elements by gamma spectrometry; Determination par spectrometrie {gamma} du taux d'irradiation des elements combustibles des reacteurs de puissance

    Energy Technology Data Exchange (ETDEWEB)

    Robin, M; Jastrzeb, M; Boisliveau, S; Boyer, R; Vidal, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    This report describes a method for determining by {gamma} spectrometry the burn up and the specific power of fuel elements irradiated in power reactors. The energy spectrum of {gamma} rays emitted by fission products is measured by means of a simple equipment using a sodium iodide detector and a multichannel analyzer. In order to extract from the spectrum a quantity proportional to the burn up, it is necessary to: - isolate an activity specific of one emitter,- give the same importance to fissions in uranium and plutonium - take into account the radioactive decay during and after irradiation. One hundred fuel elements were studied and burn up values obtained by {gamma} spectrometry are compared to results given by chemical analyses. Preliminary measurements show that the accuracy of the results is greatly increased by the use of a germanium detector, due to its good resolution. (authors) [French] Ce rapport expose une methode de determination par spectrometrie {gamma} du taux d'irradiation et de la puissance specifique des elements combustibles irradies dans les reacteurs de puissance. Une installation simple utilisant un detecteur d'iodure de sodium et un selecteur multicanaux mesure le spectre en energie du rayonnement {gamma} emis par les produits de fission. Afin d'extraire du spectre une quantite proportionnelle au taux de combustion, il faut: - isoler une activite specifique a un emetteur, - donner la meme importance aux fissions survenues dans l'uranium et le plutonium, - prendre en compte la decroissance radioactive pendant et apres l'irradiation. Les mesures ont porte sur une centaine d'elements combustibles et les taux de combustion obtenus par spectrometrie {gamma} sont compares aux resultats des analyses chimiques. Des mesures preliminaires montrent que l'utilisation d'un detecteur de germanium augmente considerablement la precision des resultats, en raison de son excellente resolution. (auteurs)

  17. Formulation of the energetic spectral distribution of in pile neutron flux (energies greater than a few hundred electron volts) (1963); Formulation des repartitions spectrales energetiques de flux neutroniques en pile (energies superieures a quelques centaines d'electrons-volts) (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Genthon, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    In the present report an expression is deduced for the spectral distribution of flux of over a few hundred electron volts; it is valid for most cases of thermal neutron reactors. This expression is: {psi}(E) = K [{psi}{sub o}(E) + h {psi}{sub e}(E)] {psi}{sub o}(E) is the so-called 'homogeneous' constituent of the flux; it corresponds approximately to the case of an infinite homogeneous medium; it is of the type: Y(V - E) e{sup (b{radical}}{sup E)}/E + Y(E-V) F E{sup {upsilon}} e{sup -{beta}}{sup E} The parameters V and F are such that {psi}{sub o}(E) and its derivative are continuous at the junction energy V. {psi}{sub e}(E) is the 'heterogeneous' constituent of the flux; it is of the type: E{sup {upsilon}} e{sup -{beta}}{sup E}. The various parameters of {psi}(E) are on the one hand characteristic of the nature of the reactor moderator, and on the other hand determined by a resonant flux measurement and one, or possibly two, measurements using a fast neutron threshold detector. We have been led furthermore to define an expression for the threshold reaction section which is more exact than the conventional transition function. (author) [French] Il est etabli, dans le present rapport, une formulation {psi}(E) des repartitions spectrales de flux au-dessus de quelques centaines d'electron-s volts, valable dans la majeure partie des cas de piles dites a neutrons thermiques. Cette formulation s'exprime: {psi}(E) = K [{psi}{sub o}(E) + h {psi}{sub e}(E)] {psi}{sub o}(E) est la composante dite 'homogene' du flux; elle correspond a peu pres au cas d'un milieu infini homogene; elle est du type: Y(V - E) e{sup (b{radical}}{sup E)}/E + Y(E-V) F E{sup {upsilon}} e{sup -{beta}}{sup E} les parametres V et F sont tels que {psi}{sub o}(E) et sa derivee soient continues a l'energie de jonction V. {psi}{sub e} est la composante dite 'heterogene' du flux ; elle est du type: E{sup {upsilon}} e{sup -{beta}}{sup E}. Les differents parametres de {psi}(E) sont, d'une part

  18. Big Pile or Small Pile?

    Science.gov (United States)

    Branca, Mario; Quidacciolu, Rossana G.; Soletta, Isabella

    2013-01-01

    The construction of a voltaic pile (battery) is a simple laboratory activity that commemorates the invention of this important device and is of great help in teaching physics. The voltaic pile is often seen as a scientific toy, with the "pile" being constructed from fruit. These toys use some strips of copper and zinc inserted in a piece…

  19. Combustion

    CERN Document Server

    Glassman, Irvin

    1987-01-01

    Combustion, Second Edition focuses on the underlying principles of combustion and covers topics ranging from chemical thermodynamics and flame temperatures to chemical kinetics, detonation, ignition, and oxidation characteristics of fuels. Diffusion flames, flame phenomena in premixed combustible gases, and combustion of nonvolatile fuels are also discussed. This book consists of nine chapters and begins by introducing the reader to heats of reaction and formation, free energy and the equilibrium constants, and flame temperature calculations. The next chapter explores the rates of reactio

  20. Modeling of the dynamical combustion of explosives: influence of mechanical properties; Modelisation de la combustion dynamique des explodifs: influence des proprietes mecaniques

    Energy Technology Data Exchange (ETDEWEB)

    Picart, D.; Pertuis, C. [CEA Le Ripault, 37 - Tours (France)

    1996-12-31

    Experimental observations performed during the combustion of solid explosives under pressure have shown an unexpected desensitization of the samples when damaged. A simplified method of combustion simulation inside a pressure cell is proposed in this study. The model used is based on the description of the mechanical behaviour of the solid phase. It allows to retrieve the overall experimental results, and in particular the occurrence of anomalous combustion modes. (J.S.) 8 refs.

  1. Application of the pulsed neutron technique on the reactors ALIZE - AQUILON (1963); Application de la methode des neutrons pulses sur les piles ALIZE et AQUILON (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Jacquemart, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    Different methods of measuring the ratio effective delayed fraction / prompt neutron lifetime, {alpha}{sub c}, are described. According to the classic pulsed neutron technique the negative reactivity due to a localized absorber is given by {rho} / {beta}{sub eff} = {alpha} / {alpha}{sub c} -1 Experiments are reported which show that in this case {alpha}{sub c} can not be considered constant for large reactivities. The absorber element distorts the flux in the system, increasing the importance of the reflector. An application of the pulsed neutron method to the measurement of critical distributed boron concentrations of various absorber elements is described. Less time is required than for the usual super-critical techniques, and the experimental analysis is simplified. It is interesting to note that the results are not influenced by the spectral sensitivity of the control element. A modified pulsed neutron method has been tried out. This procedure was used to determine by measurements at sub-critical the critical water level of uranium-heavy water lattices with a high precision. (author) [French] Differents modes operatoires pour definir la valeur du rapport pourcentage effectif de neutrons retardes / temps de vie, {alpha}{sub c}, sont exposes. La methode classique par neutrons pulses definit l'anti-reactivite d'un element absorbant a partir de la relation: {rho} / {beta}{sub eff} {alpha} / {alpha}{sub c} -1 Les manipulations effectuees montrent qu'on ne peut considerer dans ce cas {alpha}{sub c} constant pour de tres grandes anti-reactivites. L'absorbant introduit dans la pile deforme le flux et augmente l'importance du reflecteur. Une application de la methode des neutrons pulses pour mesurer le titre critique en mg de B/l de divers absorbants est signalee. Les operations sont effectuees en regime sous-critique avec un certain gain de temps et une grande facilite de depouillement. Il est interessant de noter que les resultats ne sont pas

  2. Application of the pulsed neutron technique on the reactors ALIZE - AQUILON (1963); Application de la methode des neutrons pulses sur les piles ALIZE et AQUILON (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Jacquemart, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    Different methods of measuring the ratio effective delayed fraction / prompt neutron lifetime, {alpha}{sub c}, are described. According to the classic pulsed neutron technique the negative reactivity due to a localized absorber is given by {rho} / {beta}{sub eff} = {alpha} / {alpha}{sub c} -1 Experiments are reported which show that in this case {alpha}{sub c} can not be considered constant for large reactivities. The absorber element distorts the flux in the system, increasing the importance of the reflector. An application of the pulsed neutron method to the measurement of critical distributed boron concentrations of various absorber elements is described. Less time is required than for the usual super-critical techniques, and the experimental analysis is simplified. It is interesting to note that the results are not influenced by the spectral sensitivity of the control element. A modified pulsed neutron method has been tried out. This procedure was used to determine by measurements at sub-critical the critical water level of uranium-heavy water lattices with a high precision. (author) [French] Differents modes operatoires pour definir la valeur du rapport pourcentage effectif de neutrons retardes / temps de vie, {alpha}{sub c}, sont exposes. La methode classique par neutrons pulses definit l'anti-reactivite d'un element absorbant a partir de la relation: {rho} / {beta}{sub eff} {alpha} / {alpha}{sub c} -1 Les manipulations effectuees montrent qu'on ne peut considerer dans ce cas {alpha}{sub c} constant pour de tres grandes anti-reactivites. L'absorbant introduit dans la pile deforme le flux et augmente l'importance du reflecteur. Une application de la methode des neutrons pulses pour mesurer le titre critique en mg de B/l de divers absorbants est signalee. Les operations sont effectuees en regime sous-critique avec un certain gain de temps et une grande facilite de depouillement. Il est interessant de noter que les resultats ne sont pas affectes par la

  3. Pile Driving

    Science.gov (United States)

    1987-01-01

    Machine-oriented structural engineering firm TERA, Inc. is engaged in a project to evaluate the reliability of offshore pile driving prediction methods to eventually predict the best pile driving technique for each new offshore oil platform. Phase I Pile driving records of 48 offshore platforms including such information as blow counts, soil composition and pertinent construction details were digitized. In Phase II, pile driving records were statistically compared with current methods of prediction. Result was development of modular software, the CRIPS80 Software Design Analyzer System, that companies can use to evaluate other prediction procedures or other data bases.

  4. Combustion

    CERN Document Server

    Glassman, Irvin

    2008-01-01

    Combustion Engineering, a topic generally taught at the upper undergraduate and graduate level in most mechanical engineering programs, and many chemical engineering programs, is the study of rapid energy and mass transfer usually through the common physical phenomena of flame oxidation. It covers the physics and chemistry of this process and the engineering applications-from the generation of power such as the internal combustion automobile engine to the gas turbine engine. Renewed concerns about energy efficiency and fuel costs, along with continued concerns over toxic and particulate emissions have kept the interest in this vital area of engineering high and brought about new developments in both fundamental knowledge of flame and combustion physics as well as new technologies for flame and fuel control. *New chapter on new combustion concepts and technologies, including discussion on nanotechnology as related to combustion, as well as microgravity combustion, microcombustion, and catalytic combustion-all ...

  5. Combustion

    CERN Document Server

    Glassman, Irvin

    1997-01-01

    This Third Edition of Glassman's classic text clearly defines the role of chemistry, physics, and fluid mechanics as applied to the complex topic of combustion. Glassman's insightful introductory text emphasizes underlying physical and chemical principles, and encompasses engine technology, fire safety, materials synthesis, detonation phenomena, hydrocarbon fuel oxidation mechanisms, and environmental considerations. Combustion has been rewritten to integrate the text, figures, and appendixes, detailing available combustion codes, making it not only an excellent introductory text but also an important reference source for professionals in the field. Key Features * Explains complex combustion phenomena with physical insight rather than extensive mathematics * Clarifies postulates in the text using extensive computational results in figures * Lists modern combustion programs indicating usage and availability * Relates combustion concepts to practical applications.

  6. Ignition et oxydation des particules de combustible solide pulvérisé Ignition and Oxidation of Pulverized Solid Fuel

    Directory of Open Access Journals (Sweden)

    De Soete G. G.

    2006-11-01

    Full Text Available On présente dans cet article, en utilisant la méthode du ruban chauffé, une étude de la compétition entre (1 la dévolatilisation et l'oxydation consécutive des produits de pyrolyse et (2 l'ignition de la matrice solide et sa combustion rapide. La comparaison entre le moment de l'ignition et le début de la pyrolyse permet de déterminer en fonction de la température, de la taille des particules et de la concentration en oxygène, le domaine dans lequel l'ignition d'un combustible solide pyrolysable est du type whole coal ignition (c'est-à-dire lorsque l'ignition intervient avant que la pyrolyse devienne mesurable. Les résultats suggèrent que ce type d'ignition doit s'effectuer en règle générale dans les conditions de mise en oeuvre des combustibles solides pulvérisés dans les flammes industrielles. Dans le cas de l'ignition whole coal , la vitesse de combustion de la matrice solide est inhibée dans la période qui suit l'ignition. Cette inhibition est due d'une part à la difficulté pour l'oxygène de diffuser dans les pores pendant la sortie des produits de pyrolyse, et d'autre part à la consommation préférentielle de l'oxygène dans l'oxydation des produits de pyrolyse, principalement dans le cas où cette oxydation se développe sous forme de flamme. Ce n'est que lorsque la pyrolyse s'achève que la vitesse de combustion hétérogène peut atteindre sa valeur stationnaire normale, qui est alors pratiquement identique à celle du coke. Aux températures situées entre la température d'ignition du combustible solide et la température d'extinction du coke résiduel, la combustion est incomplète, une extinction intervenant à un degré de dévolatilisation d'autant plus grande que la température est élevée. Ce phénomène s'explique qualitativement par la théorie classique d'ignition thermique lorsqu'on l'applique au cas particulier des combustibles solides pyrolysables. Les températures d'ignition ainsi que les d

  7. Letter of professional groups. Energies and fuel cells; La lettre des Groupe Professionnels, energies et piles a combustible

    Energy Technology Data Exchange (ETDEWEB)

    Meunier, M. [Supelec, 91 - Gif sur Yvette (France); Serre Combe, P. [CEA Grenoble, 38 (France); Sartorelli, G. [Maxwell Technologie, San Diego, CA (United States); Lafont, G. [PILLER France S.A., 92 - Nanterre (France); Green, A. [SAFT, 93170 Bagnolet (France); Perrin, M. [CEA Cadarache, 13 - Saint Paul lez Durance (France); Fregere, J.P.

    2004-07-01

    These proceedings of the 'Arts et Metiers' professional groups treats of energy storage solutions for delocalized power generation units. Four types of energy storage systems are presented with their operation principle, advantages and drawbacks: fuel cells and hydrogen, super-capacitors, flywheels, conventional batteries (lithium-ion, lead, redox, nickel-cadmium, zinc-air), and comparison between the different energy storage solutions including compressed air. (J.S.)

  8. OSIRIS reactor radioprotection, radioprotection measurements performed during the power rise and the first 50 megawatt operation; Radioprotection de la pile OSIRIS, mesures de radioprotection effectuees au cours de la montee en puissance et des premiers fonctionnements a 50 megawatts

    Energy Technology Data Exchange (ETDEWEB)

    Fanton, B.; Lebouleux, P

    1967-12-01

    The authors supply the results of the measurements that have been made near the Osiris reactor during the power increase and during the first functioning at 50 megawatts. The measurements relate to the absorbed dose rates in the premises, the water activation and the atmospheric contamination. The influence of the heat layer of water movements and the water rate in the core chimney on the absorbed dose rate at the footbridge level overhanging the pile core has been studied. The modifications to the protection devices that have been proposed after the measurements and the effect of these modifications on the results of the measures are given then. The regeneration process of a water purification chain has been examined from the radiation protection point of view. It has been possible to make some twenty radionuclides obvious in the produced effluents and to determine the volume activity of these effluents for each radionuclide. The whole of results show that in a general way, the irradiation levels are low during the usual reactor functioning. [French] Les auteurs fournissent les resultats des mesures de radioprotection oui ont ete effectuees aupres de la pile Osiris pendant la montee en puissance et au cours des premiers fonctionnements a 50 megawatts. Les mesures portent sur les debits de dose absorbee dans les locaux, l'activation de l'eau et la contamination atmospherique. L'influence de la couche chaude des mouvements d'eau et du debit d'eau dans la cheminee du coeur sur le debit de dose absorbee au niveau de la passerelle surplombant le coeur de la pile, a ete etudiee. Les modifications aux dispositifs de protection, qui ont ete proposees a la suite des mesures, et l'effet de ces modifications sur les resultats des mesures sont indiques ensuite. Le processus de regeneration d'une chaine d'epuration de l'eau a ete examine sous l'angle de la radioprotection. Il a ete possible de mettre en evidence une vingtaine

  9. OSIRIS reactor radioprotection, radioprotection measurements performed during the power rise and the first 50 megawatt operation; Radioprotection de la pile OSIRIS, mesures de radioprotection effectuees au cours de la montee en puissance et des premiers fonctionnements a 50 megawatts

    Energy Technology Data Exchange (ETDEWEB)

    Fanton, B; Lebouleux, P

    1967-12-01

    The authors supply the results of the measurements that have been made near the Osiris reactor during the power increase and during the first functioning at 50 megawatts. The measurements relate to the absorbed dose rates in the premises, the water activation and the atmospheric contamination. The influence of the heat layer of water movements and the water rate in the core chimney on the absorbed dose rate at the footbridge level overhanging the pile core has been studied. The modifications to the protection devices that have been proposed after the measurements and the effect of these modifications on the results of the measures are given then. The regeneration process of a water purification chain has been examined from the radiation protection point of view. It has been possible to make some twenty radionuclides obvious in the produced effluents and to determine the volume activity of these effluents for each radionuclide. The whole of results show that in a general way, the irradiation levels are low during the usual reactor functioning. [French] Les auteurs fournissent les resultats des mesures de radioprotection oui ont ete effectuees aupres de la pile Osiris pendant la montee en puissance et au cours des premiers fonctionnements a 50 megawatts. Les mesures portent sur les debits de dose absorbee dans les locaux, l'activation de l'eau et la contamination atmospherique. L'influence de la couche chaude des mouvements d'eau et du debit d'eau dans la cheminee du coeur sur le debit de dose absorbee au niveau de la passerelle surplombant le coeur de la pile, a ete etudiee. Les modifications aux dispositifs de protection, qui ont ete proposees a la suite des mesures, et l'effet de ces modifications sur les resultats des mesures sont indiques ensuite. Le processus de regeneration d'une chaine d'epuration de l'eau a ete examine sous l'angle de la radioprotection. Il a ete possible de mettre en evidence une vingtaine de radionucleides dans les effluents produits et de

  10. Optical Engines as Representative Tools in the Development of New Combustion Engine Concepts Moteurs transparents comme outils représentatifs dans le développement de nouveaux concepts des moteurs à combustion interne

    Directory of Open Access Journals (Sweden)

    Kashdan J.

    2011-11-01

    (EGR. A comparison has been made between simulated EGR (using pure nitrogen with real EGR under Diesel LTC conditions. Finally, “pure”, single component fuels are often employed in optical Diesel engines due to laser diagnostic constraints. However, these fuels generally differ from standard Diesel fuel in terms of cetane number and fuel volatility which can significantly influence the combustion and emissions characteristics in optical engines. These aspects have also been investigated within the present study. An improved understanding of the differences between optical and all-metal engines has allowed us to develop appropriate strategies to compensate for these differences on the optical engine. It is shown here that combustion phasing (and engine-out emissions matching between optical and all-metal engines can be achieved even for advanced LTC Diesel combustion strategies. The ability to ensure fully representative combustion and emissions behaviour of optical engines ultimately increases the value of optical engine data, highlighting the importance of using such engines as research tools for the further development of innovative, low emission combustion concepts. Les moteurs monocylindres transparents sont employés comme outils de recherche et de développement des moteurs à combustion interne. Ils permettent l’utilisation de techniques de diagnostics non-intrusifs (qualitatifs et quantitatifs pour étudier des phénomènes comme l’aérodynamique interne, la préparation du mélange, la combustion et la formation de polluants. Ces données expérimentales sont importantes pour la validation des modèles numériques et permettent également d’obtenir une compréhension détaillée des phénomènes physiques se déroulant dans la chambre. Les données recueillies aident au développement des nouvelles stratégies de combustion telles que la combustion homogène (HCCI et la combustion Diesel à basse température (LTC. Dans ce contexte, il est important

  11. Instrument for continuous supervision of the radioactivity of CO{sub 2} coolant in piles - DCCA -CO{sub 2} (1960); Dispositif de controle continu de la radioactivite du CO{sub 2} de refroidissement des piles - DCCA - CO{sub 2} (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Fitoussi, L [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    This paper describes an apparatus for continuous measurement of CO{sub 2} activity, which can be used on piles cooled by circulation of gas. The first part is devoted mainly to describing the apparatus used and the character of the radioactivity and thermodynamic measurements carried out, and giving the general characteristics of the gas circuit required if the instrument is to be suitably gas-tight. In the second part theoretical calculations are given, particularly on the determination of the ionisation current in an ionisation chamber with circulating gas. Several parameters enter into this determination, such as the mean path of {beta} particles in the ionisation chamber, the linear number of ion pairs formed in the gas by these {beta} particles as a function of their energy, the temperature and pressure of the gas in the ionisation chamber. This part also evaluates the sensitivity areas of the apparatus for measuring the concentrations of radioactive gases such as argon-41 and fission gases from uranium-235 in the CO{sub 2} coolant. In the last part are described the results of measurements performed with such an apparatus on the pile EL2, the special investigations carried out on the CO{sub 2} coolant of this pile, and the information gained during normal operation and during accidents. The DCCA - CO{sub 2} which has just been put in operation at G2 is briefly presented. In the conclusion the possibilities offered by this apparatus are underlined. (author) [French] Ce rapport a pour but de presenter le Dispositif de Controle continu de l'Activite du CO{sub 2} pouvant etre utilise aupres des piles refroidies par une circulation de gaz. La premiere partie du rapport consiste essentiellement a decrire l'ensemble de l'appareillage mis en oeuvre, a preciser la nature des mesures de radioactivite et de thermodynamique effectuees et a citer les caracteristiques generales du circuit de gaz pour avoir un dispositif presentant une etancheite efficace. Dans la seconde

  12. Instrument for continuous supervision of the radioactivity of CO{sub 2} coolant in piles - DCCA -CO{sub 2} (1960); Dispositif de controle continu de la radioactivite du CO{sub 2} de refroidissement des piles - DCCA - CO{sub 2} (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Fitoussi, L. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    This paper describes an apparatus for continuous measurement of CO{sub 2} activity, which can be used on piles cooled by circulation of gas. The first part is devoted mainly to describing the apparatus used and the character of the radioactivity and thermodynamic measurements carried out, and giving the general characteristics of the gas circuit required if the instrument is to be suitably gas-tight. In the second part theoretical calculations are given, particularly on the determination of the ionisation current in an ionisation chamber with circulating gas. Several parameters enter into this determination, such as the mean path of {beta} particles in the ionisation chamber, the linear number of ion pairs formed in the gas by these {beta} particles as a function of their energy, the temperature and pressure of the gas in the ionisation chamber. This part also evaluates the sensitivity areas of the apparatus for measuring the concentrations of radioactive gases such as argon-41 and fission gases from uranium-235 in the CO{sub 2} coolant. In the last part are described the results of measurements performed with such an apparatus on the pile EL2, the special investigations carried out on the CO{sub 2} coolant of this pile, and the information gained during normal operation and during accidents. The DCCA - CO{sub 2} which has just been put in operation at G2 is briefly presented. In the conclusion the possibilities offered by this apparatus are underlined. (author) [French] Ce rapport a pour but de presenter le Dispositif de Controle continu de l'Activite du CO{sub 2} pouvant etre utilise aupres des piles refroidies par une circulation de gaz. La premiere partie du rapport consiste essentiellement a decrire l'ensemble de l'appareillage mis en oeuvre, a preciser la nature des mesures de radioactivite et de thermodynamique effectuees et a citer les caracteristiques generales du circuit de gaz pour avoir un dispositif presentant une etancheite efficace

  13. GAT 3 - fuel cells and their management (PACoGES). Progress report; GAT 3 - piles a combustible et leur gestion (PACoGES). Rapport final (juillet 2002 a juin 2004)

    Energy Technology Data Exchange (ETDEWEB)

    Lamy, C.

    2005-07-01

    The Topic Analysis Group PACoGES ('Piles a Combustible et leur Gestion') has conducted thoughts on fuel cells and their management with all the searchers concern with researches and developments on fuel cells and in particular on solid oxide fuel cells (SOFC, ITSOFC) running at high temperature (600 to 1000 C). This has concerned about 200 searchers working in about fifty laboratories (CNRS, CEA, EDF, GDF, INRETS, CNAM, Armines, and several industrial teams). Here is given the final report 2002-2004 concerning all the researches carried out by this Group. (O.M.)

  14. The diode pump: its application to nuclear particle counting and to the detection of rapid neutronic power excursions in atomic piles (1962); La pompe a diodes, son application au comptage de particules nucleaires et a la detection des excursions rapides de puissance neutronique d'une pile atomique (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Nicolo, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-05-15

    This work deals in particular with three applications of an electronic device whose principle is based on that of the diode pump. 1- Linear response circuit 2- Logarithmic response circuit 3- Detection of neutronic power excursions in atomic piles using a circuit or a combination of several circuits of the linear response type. Each of the applications has been studied theoretically and experimentally. Finally, the detection of rapid power excursions is extensively discussed with reference to the many methods available, emphasis being laid on the rapidity of the electronic response. (author) [French] Cet ouvrage traite plus particulierement de trois applications d'un dispositif electronique dont le principe de fonctionnement est base sur celui de la pompe a diodes. 1- Circuit a reponse lineaire 2- Circuit a reponse logarithmique 3- Detection des excursions de puissance neutronique d'une pile atomique a l'aide d'un circuit ou d'une association de plusieurs circuits a reponse lineaire. Chacune des applications fait l'objet d'une etude theorique et experimentale. Enfin, la detection des excursions rapides de puissance est tres largement discutee a travers plusieurs methodes, notamment sur la partie concernant la rapidite de reponse de l'electronique. (auteur)

  15. Recent developments concerning French fuel elements used in natural uranium - graphite - CO{sub 2} reactor systems; Developpements recents des elements combustibles francais de la filiere uranium naturel - graphite - CO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Salesse, M; Stohr, J A; Jeanpierre, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    internal can of the annular element, has necessitated very much research work. - the exact temperature drop at the contact between the uranium and the can, and the strength of the lower end of the cartridge are points which are increasingly crucial in the case of the annular element. All in all the annular element thus calls for a great research effort. This effort is justified by the big step forwards in which it will result in the case of the EDF reactors thanks to its high specific power and to the high weight of uranium in each cartridge. (authors) [French] La politique choisie en France pour le developpement des elements combustibles destines aux reacteurs de l'Electricite de France, consiste a chercher, pour chaque pile nouvelle, a beneficier au maximum des progres techniques les plus recents en etudiant chaque fois un nouvel element combustible permettant une puissance par canal aussi elevee que possible. Les derniers elements combustibles ainsi etudies par le Commissariat a l'Energie Atomique sont de deux types differents: un element a tube d'uranium ferme aux deux extremites et refroidi exterieurement (ce type d'element, retenu pour les reacteurs EDF 2, EDF 3 et EDF 4 permet des puissances specifiques maximum de l'ordre de 6 MW/t). Un element a tube d'uranium ouvert, refroidi interieurement et exterieurement, appele clemont annulaire et dont on etudie la possibilite pour EDF5. Un tel element peut permettre des puissances specifiques superieures a 12 MW/t. Ces deux types d'elements possedent des caracteristiques communes: la gaine, pour le refroidissement externe, comporte des ailettes en chevron. Ce type de profil, qui a recu recemment des ameliorations notables augmentant son efficacite thermique, a l'avantage important d'eviter les vibrations de cartouche mais a pose des problemes technologiques de tenue au cyclage thermique qui ont necessite une etude approfondie. les cartouches sont placees a l'interieur de chemise en graphite, ce qui limite les efforts

  16. Environmental Impact of Munition and Propellant Disposal (Impact Environnemental de l’Elimination des Munitions et des Combustibles)

    Science.gov (United States)

    2010-02-01

    the Future of Demil 3-29 3.4.2 Poster Session 3-32 3.4.2.1 The Situation in Lithuania: The Studies on the Explosive Contamination, 3-32 Their Toxic...Presentations and Documents Supporting Capability Assessments A-1 Annex B – Presentations, Paper/ Posters and Videos from the Sofia Meeting B-1 Annex C...sur l’environnement. La réunion a inclus des participants provenant de l’OTAN et des partenaires dont la Russie et la Géorgie. Les sessions étaient

  17. Cfd Based Shape Optimization of Ic Engine Optimisation de l'admission et des chambres de combustion des moteurs avec la modélisation 3D

    Directory of Open Access Journals (Sweden)

    Griaznov V.

    2006-12-01

    Full Text Available Intense competition and global regulations in the automotive industry has placed unprecedented demands on the performance, efficiency, and emissions of today's IC engines. The success or failure of a new engine design to meet these often-conflicting requirements is primarily dictated by its capability to provide minimal restriction for the inducted and exhausted flow and by its capability to generate strong large-scale in-cylinder motion. The first criterion is directly linked to power performance of the engine, while the latter has been shown to control the burn rate in IC engines. Enhanced burn rates are favorable to engine efficiency and partial load performance. CFD based numerical simulations have recently made it possible to study the development of such engine flows in great details. However, they offer little guidance for modifying the ports and chamber geometry controlling the flow to meet the desired performance. This paper presents a methodology which combines 3D, steady state CFD techniques with robust numerical optimization tools to design, rather than just evaluate the performance, of IC engine ports and chambers. La forte concurrence et les réglementations dans l'industrie automobile entraînent aujourd'hui une exigence sans précédent de performance, de rendement et d'émissions pour les moteurs à combustion interne. Le succès ou l'échec de la conception d'un nouveau moteur satisfaisant à ces propriétés, souvent contradictoires, est dicté, dans un premier temps, par l'obtention d'une restriction minimale des débits d'admission et d'échappement, ensuite, par la nécessité de générer des écoulements forts de grande amplitude. Le premier critère est directement lié à la performance du moteur, tandis que le second est reconnu comme contrôlant la combustion. Des dégagements de chaleur accélérés améliorent le rendement et les performances à faible charge. La simulation 3D rend possible depuis peu d

  18. Ameliorer les performances environnementales des centrales a charbon pulverise via la co-combustion de combustible derive de dechets

    Science.gov (United States)

    Vekemans, Odile Geraldine

    Coal supplies around 28% of the world's energy needs and produces some 40% of the world's electricity. In the United States, close to 650 coal power plants currently produce electricity from coal, the majority of witch are equipped with pulverized coal boilers build in the 80's. Due to coal's intrinsic content in nitrogen and sulfur, its combustion is associated with high levels of NOx and SO2 emissions, that are responsible, among other thing, for acid rains. In order to help reduce SO2 emissions of coal power plant, this thesis focuses on the behaviour of a novel feedstock called ReEF(TM) or ReEngineered Feedstock(TM), developed by the company Accordant Energy LLCRTM, that combines non recyclable waste and alkaline sorbent. Since waste have a high calorific value and do not contain sulfur, and since alkaline sorbents (such as limestone) are able to react with SO2 and capture it in solid state, co-combustion of ReEF(TM) and coal could reduce SO2 emissions inside the furnace chamber itself. This technology easy to implement, as it requires a limited initial investment and limited additional space, could help avoid the construction of costly flue gas treatment unit downstream from the furnace. However, careless combustion of this engineered fuel could have disastrous consequences for the coal power plant owners. This thesis, then, deliver one among the first experimental study of co-combustion of coal and ReEF(TM) in conditions characteristic of pulverized coal boilers. As a first step, in order to get familiarize with the feedstock under study, the thermal degradation of a ReEF(TM) without sorbent and of its components is analyzed by thermogravimetry. With the analysis of more than 70 samples at heating rates ranging from 5°C/min to 400°C/min we are able to conclude that ReEF(TM) thermal degradation can be seen as the independent thermal degradation of its components, as long as heat transfer limitations are taken into account. Thus, no substantial chemical

  19. Uranium absorption study pile; Empilement pour le controle de l'absorption de l'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Raievski, V; Sautiez, B [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    The report describes a pile designed to measure the absorption of fuel slugs. The pile is of graphite and comprises a central section composed of uranium rods in a regular lattice. RaBe sources and BF{sub 3} counters are situated on either side of the center. A given uranium charge is compared with a specimen charge of about 560 kg, and the difference in absorption between the two noted. The sensitivity of the equipment will detect absorption variations of about a few ppm boron (10{sup -6} boron per gr. of uranium) or better. (author) [French] Nous decrivons un dispositif permettant de mesurer l'absorption des elements combustibles d'une pile. Ce dispositif est constitue par un empilement de graphite dont la region centrale est formee par un reseau regulier de barres d'uranium. Des sources de RaBe et des compteurs a BF{sub 3} sont places de part et d'autre de cette region. En comparant un chargement d'uranium a un chargement etalon d'environ 560 kg, on peut determiner la difference d'absorption entre ces deux chargements. La sensibilite permettrait de deceler une variation d'absorption de l'ordre du ppm de bore (10{sup -6} g de bore par gramme d'uranium) et peut-etre mieux. (auteur)

  20. Dosage of fission products in irradiated fuel treatment effluents (radio-chemical method); Dosage des produits de fission dans les effluents du traitement des combustibles irradies (methode radiochimique)

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, J [Commissariat a l' Energie Atomique, Marcoule (France). Centre d' Etudes Nucleaires

    1966-07-01

    The dosage methods presented here are applicable to relatively long-lived fission products present in the effluents resulting from irradiated fuel treatment processes (Sr - Cs - Ce - Zr - Nb - Ru - I). The methods are based on the same principle: - addition of a carrying-over agent - chemical separation over several purification stages, - determination of the chemical yield by calorimetry - counting of an aliquot liquid portion. (author) [French] Les methodes de dosage presentees concernent les produits de fission a vie relativement longue presents dans les effluents de traitement des combustibles irradies (Sr - Cs - Ce - Zr - Nb - Ru - I). Elles sont toutes basees sur le meme principe: - addition d'entraineur, - separation chimique en plusieurs stades de purification, - determination du rendement chimique par calorimetrie, - comptage d'une aliquote liquide. (auteur)

  1. Exploitation des mesures électriques en vue de la surveillance et du diagnostic en temps réel des piles à combustible pour application transport automobile

    OpenAIRE

    Taleb , Miassa

    2015-01-01

    In the current global energy context, proton exchange membrane fuel cells represent a promising solution to the future development of a new generation of electrified vehicles, allowing greater autonomy than electrified vehicles using batteries.Nevertheless, the large-scale development of fuel cells remains limited due to some technological locks, such as water management. To enable mass production of fuel cells, such problems must be solved. Several working axes may be envisaged both on the h...

  2. Measure of the efficiency of a long counter of Hanson's type and use of this counter for the survey of the slow neutrons coming from the reactor of Chatillon; Mesure de l'efficacite d'un long compteur du type Hanson et utilisation de ce compteur a l'etude des neutrons lents sortant de la pile de Chatillon

    Energy Technology Data Exchange (ETDEWEB)

    Barloutaud, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1953-07-01

    A detection device of fast neutrons of efficiency almost independent of the energy of the neutrons has been achieved. It efficiency has been measured in absolute value for groups of neutrons of different energies. This device allowed to get some indications on the energy composition of the neutrons leaving from the reactor of Chatillon. (author) [French] Un dispositif de detection de neutrons rapides d'efficacite pratiquement independante de l'energie des neutrons a ete realise. Son efficacite a ete mesuree en valeur absolue pour des groupes de neutrons de diverses energies. Ce dispositif a permis obtenir quelques indications sur la composition energetique des neutrons sortant de la pile de Chatillon. (auteur)

  3. Fission product determination in irradiated fuel processing waste (electrophoresis); Dosage des produits de fission dans les effluents de traitement des combustibles irradies (electrophorese)

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, J M; Tret, J [Commissariat a l' Energie Atomique, Centre de Marcoule, 30 - Bagnols-sur-Ceze (France). Centre de Production de Plutonium de Marcoule. Services d' Extraction du Plutonium

    1966-07-01

    This dosage method concerns fission products present in the waste produced from the processing of cooled irradiated fuels. - Sr, Cs, Ce, Y, Ru by quantitative analysis; - Zr, Nb by qualitative analysis. It includes electrophoresis on paper strips one meter long which is then analysed between two window-less Geiger counters. For an activity of 10{sup -2} {mu}Ci of any cation in a 10 {mu}l spot, the standard error {sigma} if 3 to 4 per cent. complete analysis lasts about 5 hours. (authors) [French] Cette methode de dosage concerne les produits de fission presents dans les effluents de traitement des combustibles irradies refroidis: - Sr, Cs, Ce, Y, Ru en analyse quantitative; - Zr, Nb en analyse qualitative. Elle comporte une electrophorese sur bande de papier de un metre de longueur suivie d'un depouillement entre deux compteurs Geiger sans fenetre. Pour une activite de 10{sup -2} {mu}Ci d'un cation quelconque dans une tache de 10 {mu}l l'erreur standard {sigma} est de 3 a 4 pour cent. L'analyse complete demande environ 5 heures. (auteurs)

  4. In-situ test of the static behaviour of a pile foundation subjected to thermo-mechanical solicitations. Intermediate report of January 1999; Test en conditions reelles du comportement statique d`un pieu soumis a des sollicitations thermo-mecaniques. Rapport intermediaire de janvier 1999

    Energy Technology Data Exchange (ETDEWEB)

    Moreni, M.; Laloui, L.; Steinmann, G. [and others

    1999-10-01

    A pile foundation of the polyvalent building in the north quarter of the Federal Institute of Technology in Lausanne (EPFL) was equipped with a hydraulic circuit in order to be able to inject heat into the pile (i.e. the pile was transformed into a heat exchanger pile). Load, deformation and temperature sensors were installed in the pile in order to assess the influence of thermal solicitations on the static behaviour of the pile. In the initial phase of the project (up to May 1998), the design and realisation of the heat exchanger pile was scheduled together with the installation of the measurement sensors. The next phase, ending one month after publication of the present report, is comprised of series of thermal solicitations applied in the pile, called tests. Due to the construction of the building, the weight on the pile increases between each test. This report contains the presentation of all the measurements done in the 6 tests performed in between the completion of each floor of the building. The pile was heated with a temperature difference of 15 K for each test, except for the first one, where it reached 22 K (this was before the construction of the building`s basement). The temperatures and deformations induced by the thermal and mechanical solicitations were measured and the stresses calculated at different depths of the pile (fluid temperatures, flow rate, electric and thermal powers) were continuously recorded. Sonic coring and a control using the reflection method were performed to determine the pile elastic modulus and the quality of its concrete. The last phase of the project (March - December 1999) deals with the analysis of the measurements in order to assess the influence of a temperature variation on the ability of the pile to support the load of the building [Francais] Un pieu du batiment polyvalent du Quartier Nord de l`Ecole Polytechnique Federale de Lausanne (EPFL) a ete equipe d`un circuit hydraulique pour pouvoir lui injecter de la chaleur

  5. Thermal conductivity of sintered UO{sub 2} under in-pile conditions; Conductibilite thermique de l'UO{sub 2} fritte dans les conditions d'utilisation en pile

    Energy Technology Data Exchange (ETDEWEB)

    Stora, J P; Bernardy De Sigoyer, B; Delmas, R; Deschamps, P; Lavaud, B; Ringot, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    des surfaces pseudo-cylindriques: celles-ci constituent autant de barrieres thermiques s'opposant a l'ecoulement du flux calorifique. On mesure donc une conductibilite thermique apparente k{sub a}(T) inferieure a la valeur intrinseque k(T) de ce parametre. L'efficacite de ces barrieres decroit par reduction du jeu et lorsque la pression exterieure exercee sur l'empilement fracture croit: a la limite, sous contrainte de frettage elevee: k{sub a}(T) {approx_equal} k(T). Dans le domaine de la conduction phononique (T {<=} 1350 deg C), l'expression kw.cm{sup -1}.C{sup -1}=1/(11+0.024*T) rend alors compte de la conductibilite thermique reelle. Au-dela de 1350 deg C la conductibilite thermique se releve. Deux mesures faites en pile jusqu'a 1250 deg C au moyen de cartouches equipees de thermocouples confirment, dans la limite des erreurs experimentales, a la fois l'expression ci-dessus et l'influence, qualitative des contraintes de frettage. Dans la geometrie reelle du 'crayon' combustible d'EL-4 des essais similaires ont ete effectues hors pile et en pile: hors pile les influences du jeu initial, de la nature du gaz remplissant le 'crayon' et de la pression exterieure ont ete etudies et les resultats sont coherents avec les interpretations ci-dessus. Une pression exterieure de 60 kg/cm{sup 2} parait insuffisante pour restaurer completement la conductibilite thermique du combustible. (auteurs)

  6. Can rupture detector for water cooled piles; Detecteur de rupture de gaine pour piles refroidies a l'eau

    Energy Technology Data Exchange (ETDEWEB)

    Choudens, H de; Guitton, P

    1962-07-01

    The object of this study was to develop a simple, easy to-build, apparatus for showing the appearance of a defect on a fuel element can of a swimming pool reactor. The apparatus used consists of a coil of activated carbon around a NaI(Tl) crystal. Through this coil pass the gases obtained by degassing a sample of water from the reactor; the fission gases which appear when a can leaks are trapped in the carbon; the NaI(Tl) crystal is coupled with a photomultiplier followed by a single-channel selector fixed on a photo-electric peak characteristic of the {gamma} spectrum of fission gases. Preliminary experiments were carried out in laboratory; a more complete device was then built and is now working in the reactor Melusine. (author) [French] Le but de cette etude a ete la realisation d'un appareil simple et facile a realiser destine a indiquer l'apparition d'un defaut sur une gaine des elements combustibles d'une pile piscine. A cet effet, l'appareillage utilise est compose d'un serpentin de charbon active entourant un cristal de NaI (Tl). Ce serpentin est parcouru par les gaz provenant du degazage d'un prelevement d'eau de la piscine du reacteur; les gaz de fission apparaissant lors d'une rupture de gaine sont retenus dans le charbon; le cristal INa (Tl) est couple avec un PM suivi d'un selecteur monocanal cale sur un pic photoelectrique caracteristique du spectre {gamma} des gaz de fission. Des manipulations preliminaires ont ete faites en laboratoire, un dispositif plus complet a ete ensuite monte et fonctionne a la Pile Melusine. (auteurs)

  7. Evolution des modèles mathématiques directs appliqués aux moteurs à combustion interne Evolution of Direct Mathematical Models Applied to Internal-Combustion Engines

    Directory of Open Access Journals (Sweden)

    Rumiano N.

    2006-11-01

    Full Text Available Cet article rend compte de l'évolution présente et future des modèles mathématiques directs de simulation dans les moteurs. Ceux-ci sont basés sur la résolution des équations de Navier-Stokes, et deviennent peu à peu une nécessité surtout en ce qui concerne la combustion hétérogène. Après un aperçu sur l'état actuel des algorithmes de calcul et des sous-modèles physiques utilisés, on présente une revue des principaux codes de calcul appliqués au moteur, avec quelques-uns de leurs résultats. Après avoir évoqué les obstacles rencontrés lors de leur mise en oeuvre, on aborde l'évolution prévisible lors des prochaines années, tant pour les techniques de calcul que pour les codes eux-mêmes. This article describes the present and future evolution of direct mathematical models used for engine simulation. These models are based on the solving of Navier-Stokes equations and are gradually becoming an absolute necessity, especially with regard to heterogeneous combustion. Alter briefly describing the present state of the computing algorithms and physical submodels used, the leading computing codes applied to engines are reviewed, with some of their results. Then the stumbling blocks encountered during the implementation of these codes are described, followed by the foresable evolution in the next few years, for both computing techniques and the codes themselves.

  8. EL3 reactor description and safety analysis report; Pile EL3, rapport descriptif et de surete

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1969-02-01

    ). Elle est concue pour fonctionner a une puissance thermique maximale de 20 mW. Elle fournit un flux maximal thermique de 10{sup 14} neutrons/cm{sup 2}/sec. Elle dispose de nombreux dispositifs experimentaux. La pile EL-3 est contenue, avec ses auxiliaires des circuits des fluides, dans une enceinte etanche, en legere depression. Le circuit d'eau lourde de refroidissement primaire est entierement contenu dans cette enceinte. Son refroidissement est assure, par l'intermediaire d'un circuit secondaire en eau legere, par des refrigerants atmospheriques. Les circuits de ventilation de l'enceinte etanche et du bloc pile ne rejettent l'air a l'exterieur, en fonctionnement normal, par une cheminee particulierement etudiee, qu'apres filtrage et eventuellement dilution. La contamination eventuelle de l'eau legere, ou de l 'air, par des produits actifs, est controlee en permanence, pour permettre l'arret du reacteur et eviter le rejet a l'atmosphere de produits dangereux. La pile El3, mise en chantier en mai 1955, a diverge en juillet 1957, effectue sa premiere montee en puissance en decembre 1957 et a atteint sa pleine puissance en avril 1958. La mise en place du combustible actuel (cristal de Neige) s'est effectue durant l'ete 1964. Pile a vocation experimentale, elle est utilisee pour des etudes theoriques et technologiques par irradiation de materiel dans les canaux experimentaux et dans les cellules memes du coeur, avec possibilites de constituer des boucles independantes (en ce qui concerne les fluides de refroidissement). Trente canaux verticaux sont reserves a la fabrication de radioelements artificiels. (auteur)

  9. EL3 reactor description and safety analysis report; Pile EL3, rapport descriptif et de surete

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1969-02-01

    concue pour fonctionner a une puissance thermique maximale de 20 mW. Elle fournit un flux maximal thermique de 10{sup 14} neutrons/cm{sup 2}/sec. Elle dispose de nombreux dispositifs experimentaux. La pile EL-3 est contenue, avec ses auxiliaires des circuits des fluides, dans une enceinte etanche, en legere depression. Le circuit d'eau lourde de refroidissement primaire est entierement contenu dans cette enceinte. Son refroidissement est assure, par l'intermediaire d'un circuit secondaire en eau legere, par des refrigerants atmospheriques. Les circuits de ventilation de l'enceinte etanche et du bloc pile ne rejettent l'air a l'exterieur, en fonctionnement normal, par une cheminee particulierement etudiee, qu'apres filtrage et eventuellement dilution. La contamination eventuelle de l'eau legere, ou de l 'air, par des produits actifs, est controlee en permanence, pour permettre l'arret du reacteur et eviter le rejet a l'atmosphere de produits dangereux. La pile El3, mise en chantier en mai 1955, a diverge en juillet 1957, effectue sa premiere montee en puissance en decembre 1957 et a atteint sa pleine puissance en avril 1958. La mise en place du combustible actuel (cristal de Neige) s'est effectue durant l'ete 1964. Pile a vocation experimentale, elle est utilisee pour des etudes theoriques et technologiques par irradiation de materiel dans les canaux experimentaux et dans les cellules memes du coeur, avec possibilites de constituer des boucles independantes (en ce qui concerne les fluides de refroidissement). Trente canaux verticaux sont reserves a la fabrication de radioelements artificiels. (auteur)

  10. Study of the aqueous chemical treatment of uranium zirconium fuels; Etude du traitement chimique des combustibles uraniumzirconium par voie seche

    Energy Technology Data Exchange (ETDEWEB)

    Bourgeois, M; Nollet, P [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    A dry process has been studied for separating the uranium from the zirconium-either for recovering the enriched uranium from fuel element production waste, or with a view to treating this waste after irradiation. In this process the alloy is treated with hydrochloric acid at 400 deg. C in a fluidized corundum bed which causes the zirconium to volatilize as tetrachloride and the uranium to form the trichloride. This latter is then converted to the hexafluoride by attack with fluorure. After the laboratory tests, a first pilot plant with a capacity of 1 kg of alloy was tried out at the Fontenay-aux-Roses Nuclear Research Centre; this made it possible to fix the operational conditions for the process. An industrial scale plant was then built with the collaboration of the from Kuhlmann, and operated until a satisfactory process had been developed for treating the waste. This installation treats 3 kg/h of alloy with a yield for the hydrochloric acid of about 50 per cent and with a uranium loss in the zirconium tetrachloride of about 0.1 per cent. An active pilot plant capable of treating of treating a few kilos of irradiated alloy is now being studied. (authors) [French] On a etudie un procede de voie seche pour effectuer la separation de l'uranium et du zirconium - soit en vue de la recuperation de l'uranium enrichi contenu dans les dechets de fabrication des elements combustibles - soit en vue du traitement de ceux-ci apres irradiation. Ce procede consiste a attaquer l'alliage par l'acide chlorhydrique a 400 deg. C dans un lit fluidise de corindon, ce qui a pour effet de volatiliser le zirconium sous forme de tetrachlorure et de transformer l'uranium en trichlorure. Ce dernier est ensuite converti en hexafluorure par action du fluor. Apres des essais de laboratoire, un premier pilote a l'echelle de 1 kg d'alliage a ete experimente au Centre d'Etudes Nucleaires de Fontenay-aux-Roses et a permis de determiner les conditions operatoires du procede. En collaboration avec

  11. Optimization of Gas Turbine Cogeneration Systemfor Various Heat Exchanger Configurations Optimisation des systèmes de turbine à combustion en cogénération pour différentes configurations des échangeurs de chaleur

    Directory of Open Access Journals (Sweden)

    Costea M.

    2011-11-01

    Full Text Available The present paper investigates and compares the performance of three configurations of Gas Turbine systems allowing cogeneration of heat and electricity, on the basis of an irreversible regenerative Brayton-Joule cycle. The proposed model is developed for two different cycle constraints, namely, an imposed heat transfer rate released by the fuel combustion, or an imposed maximum cycle temperature. The model also includes the irreversibility due to the friction in the compressor and turbine, and due to the heat losses in the combustion chamber and heat exchangers. Energy efficiency for the system without and with cogeneration, and the exergetic efficiency are used in order to emphasize the cogeneration advantages, but also to help the designer to choose the best configuration of the Gas Turbine system that suits to his needs. Experimental data from a real operating microturbine were used to validate the model. The power output and the energy and exergetic efficiencies are optimized with respect to a set of operating parameters. The optimum values of the Gas Turbine engine parameters corresponding to maximum power output and respectively to maximum thermodynamic efficiency are discussed. The results show same optimal values of the compression ratio corresponding to almost all maximum performances for an imposed heat transfer rate released by the fuel combustion, excepting the maximum exergetic efficiency that requires higher optimal values of the compression ratio than the maximum exergy rate one. A performance comparison of the three configurations is done and future perspectives of the work are proposed. Cet article explore et compare les performances des trois configurations de systèmes de turbine à combustion permettant la production combinée de chaleur et d’électricité, sur la base du cycle irréversible régénératif de Brayton-Joule. Le modèle proposé est développé pour deux contraintes différentes sur le cycle, notamment le

  12. Real-time modelling of the diesel engine combustion process; Echtzeitfaehige Modellierung des dieselmotorischen Verbrennungsprozesses

    Energy Technology Data Exchange (ETDEWEB)

    Merz, B.

    2008-07-01

    The publication investigates single-zone models of diesel engine combustion which are capable, in addition to pre-injection and main injection, to represent post-injection processes on a physical basis. These must function in real time as they are used in ''hardware-in-the-loop'' test stands. Methods to adapt the models to other engine types are explained. Validation is made across the whole characteristic field on the basis of measured data provided by two serial engines. For assessing pollutant production, models are integrated that are capable of calculating NOx and soot formation. These, too, are calculated in real time using appropriate hardware systems. A runtime analysis compares the computing times of the models. (orig.)

  13. The reprocessing of irradiated fuels by halides and their compounds; Le traitement des combustibles irradies par les halogenes et leurs composes

    Energy Technology Data Exchange (ETDEWEB)

    Bourgeois, M; Faugeras, P [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    A brief description is given of the experiments leading to the choice of the process volatilization of fluorides by gas phase attack. The chemical process is described for certain current types of clad Fuels: the aluminium or the zirconium cladding is first volatilized as chloride by attack with gaseous hydrogen chloride. The uranium is then transformed into volatile hexafluoride by attack with fluorine. These reactions are carried out consecutively in the same reactor in the presence of a fluidized bed of alumina which facilitates heat exchange. The experiments have been carried out in quantities from 100 gms to several kilograms of fuel, first without activity, and then with tracers. A description is given of the laboratory research which was carried out simultaneously on the separation of uranium and plutonium fluorides. Finally, an apparatus is described which is intended to test the process on irradiated fuel at an activity level of several thousands of curies of fission products. (authors) [French] On rappelle brievement les experimentations qui nous ont permis de decider du procede adopte volatilisation des fluorures par attaque en phase gazeuse. On decrit le processus chimique pour certains types courants de combustibles Gaines: dans un premier stade, l'aluminium ou le zirconium est volatilise sous forme de chlorure par action de l'acide chlorhydrique. Ensuite, l'uranium est transforme en hexafluorure volatil par action du fluor. Ces operations se font successivement dans un meme reacteur, en presence d'un lit fluidise d'alumine qui a pour but de faciliter les echanges thermiques. L'experimentation a ete conduite sur des quantites allant de 100 g a plusieurs kg de combustibles, en inactif, puis avec des traceurs. On decrit les etudes de laboratoire menees parallelement sur la separation des fluorures d'uranium et de plutonium. Enfin, on decrit une installation en construction destinee a experimenter le procede sur combustible irradie, a l'echelle de

  14. Energetic study of combustion instabilities and genetic optimisation of chemical kinetics; Etude energetique des instabilites thermo-acoustiques et optimisation genetique des cinetiques reduites

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Ch.E.

    2005-12-15

    Gas turbine burners are now widely operated in lean premixed combustion mode. This technology has been introduced in order to limit pollutants emissions (especially the NO{sub x}), and thus comply with environment norms. Nevertheless, the use of lean premixed combustion decreases the stability margin of the flames. The flames are then more prone to be disturbed by flow disturbances. Combustion instabilities are then a major problem of concern for modern gas turbine conception. Some active control systems have been used to ensure stability of gas turbines retro-fitted to lean premixed combustion. The current generation of gas turbines aims to get rid of these control devices getting stability by a proper design. To do so, precise and adapted numerical tools are needed even it is impossible at the moment to guarantee the absolute stability of a combustion chamber at the design stage. Simulation tools for unsteady combustion are now able to compute the whole combustion chamber. Its intrinsic precision, allows the Large Eddy Simulation (LES) to take into account numerous phenomena involved in combustion instabilities. Chemical modelling is an important element for the precision of reactive LES. This study includes the description of an optimisation tools for the reduced chemical kinetics. The capacity of the LES to capture combustion instabilities in gas turbine chamber is also demonstrated. The acoustic energy analysis points out that the boundary impedances of the combustion systems are of prime importance for their stability. (author)

  15. The controlled of the materials by the method of oscillation at the reactor core of Chatillon; Le controle des materiaux par la methode d'oscillation a la pile de Chatillon

    Energy Technology Data Exchange (ETDEWEB)

    Breton, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-07-01

    Nuclear controls has for aim to determine the validity of materials intended to be used for the construction of the reactor core. The cross-section of capture of these materials has to be measured while comparing them either to a standard of the same material, either to an element of cross-section supposed known. We studied the disruption of the working of the reactor generated by the periodic introduction of a sample of the studied material. This method is based on the measure of the phase angle of the signal provided by the ionization chamber. This signal results from the composition of a local signal and an aggregate signal due to the effects of diffusion and capture. This method permits the comparison of the capture of 2 samples very dispersive and few capturing as the graphite, the beryllium, the beryllium oxide, with a good precision. It permits to determine the cross-section of capture of elements as magnesium or aluminum. (M.B.) [French] Le controle nucleaire a pour but de determiner la valeur des materiaux destines a etre utilises pour la construction des piles. II s'agit de mesurer la section efficace de capture de ces materiaux en les comparant soit a un echantillon etalon du meme materiau, soit a un element de section efficace supposee connue. On etudie la perturbation du fonctionnement de la pile engendree par l'introduction periodique d'un echantillon du materiau a etudier. Cette methode est basee sur la mesure de l'angle de phase du signal fourni par la chambre d'ionisation. Ce signal resulte de la composition d'un signal local et d'un signal global dus aux effets de diffusion et de capture. Cette methode permet la comparaison de la capture de 2 echantillons de corps tres diffusants et peu capturants comme le graphite,le beryllium, l'oxyde de beryllium, avec une bonne precision. Elle permet par ailleurs de determiner la section efficace de capture de corps tels que le magnesium ou l'aluminium. (M.B.)

  16. Taming Windscale's piles

    International Nuclear Information System (INIS)

    Adams, A.L.

    1989-01-01

    The options as to what to do with the Windscale Piles are being assessed before a final decision on decommissioning is made. Both Piles were shutdown in 1957 following the fire in the Pile number 1. Pile 1 still contains 22 tons of natural uranium fuel. The details of graphite moderator content, biological shielding and other components and containment are given. The fuel and isotope channels in Pile 2 have been examined and the air and water ducts have been inspected. The chimneys of both Piles are contaminated and all entrances have been sealed. Before any work starts the air outlet ducts will be sealed from the chimney and a ventilation system installed. A manipulator is being prepared to remove the remaining fuel elements from both Piles. The proposed decommissioning programme for both Piles is outlined. (U.K.)

  17. PAC-Car I - A highly efficient vehicle with hydrogen fuel cell; PAC-Car I - Vehicule ultra efficient a pile a combustible

    Energy Technology Data Exchange (ETDEWEB)

    Guzzella, L.; Paganelli, G. [Swiss Federal Institute of Technology (EPFZ), Institut fuer Mess- und Regeltechnik, ETH Zentrum, Zuerich (Switzerland); Santin, J.-J. [UVHC - Campus du Mont Houy, Valenciennes (France)

    2003-07-01

    This report presents a very low energy consumption vehicle developed for the 2003 edition of the Shell Eco-marathon race. Innovating developments were needed for most of its components, which are not yet available on the market. The chemical energy of hydrogen gas is first converted into electrical energy by a 900 W Proton Exchange Membrane Fuel Cell (PEMFC). The car is driven by two DC powered electrical motors, which get their energy from a power electronic converter supplied by the fuel cell. Hydrogen is stored as metal hydride, in the solid state. The report gives a detailed description of the fuel cell, the control system principles as well as a presentation of the hydrogen tank. Various pictures show the vehicle and some of its mechanical details. Performance monitoring indicated a fuel consumption of only 15.9 grams of hydrogen per 100 km; this corresponds to an equivalent of 1694 km for the consumption of one litre of lead-free 95 gasoline in a usual internal combustion engine. However, as the vehicle used for the race had not been specifically developed for the fuel cell based equipment and the research efforts were focused on the advanced propulsion systems, the overall performance could still be significantly improved by optimising the vehicle itself.

  18. Contribution to the study of the fission-gas release in metallic nuclear fuels; Contribution a l'etude du degagement des gaz de fission dans les combustibles nucleaires metalliques

    Energy Technology Data Exchange (ETDEWEB)

    Kryger, B [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-10-01

    In order to study the effect of an external pressure on the limitation of swelling due to fission-gas precipitation, some irradiations have been carried out at burn-ups of about 35.000 MWd/ton, and at average sample temperatures of 575 Celsius degrees, of non-alloyed uranium and uranium 8 per cent molybdenum gained in a thick stainless steel can. A cylindrical central hole allows a fuel swelling from 20 to 33 per cent according to the experiment. After irradiation, the uranium samples showed two types of can rupture: one is due to the fuel swelling, and the other, to the pressure of the fission gases, released through a network of microcracks. The cans of the uranium-molybdenum samples are all undamaged and it is shown that the gas release occurs by interconnection of the bubbles for swelling values higher than those obtained in the case of uranium. For each type of fuel, a swelling-fission gas release relationship is established. The results suggest that good performances with a metallic fuel intended for use in fast reactor conditions can be obtained. (author) [French] Afin d'etudier l'effet d'une pression exterieure sur la limitation du gonflement due a la precipitation des gaz de fission, on a irradie a des taux de combustion d'environ 35.000 MWj/t et a des temperatures moyennes de 575 degres des echantillons d'uranium non allie et d'uranium-molybdene 8 pour cent contenus dans une gaine en acier inoxydable epaisse. Un trou cylindrique central permet au combustible de gonfler librement de 20 a 33 pour cent suivant les cas. Apres irradiation les echantillons d'uranium presentent deux types de ruptures de gaine: l'une due au gonflement du combustible, l'autre a la pression des gaz degages, ce degagement des gaz etant provoque par un reseau de micro-fissures. Les gaines des echantillons d'alliage uranium-molybdene sont toutes intactes et l'on montre que le relachement des gaz opere par interconnexion des bulles pour des valeurs de gonflement plus elevees que dans

  19. Materials Control in the Fabrication of Enriched Uranium Fuels; Controle des Matieres au Cours de la Fabrication des Combustibles a Base d'Uranium Enrichi; Uchet materialov pri izgotovlenii topliva na obogashchennom urane; Control de Materiales en la Elaboracion de Combustibles de Uranio Enriquecido

    Energy Technology Data Exchange (ETDEWEB)

    Cardwell, Jr., R. G. [Oak Ridge National Laboratory, Oak Ridge, TN (United States)

    1966-02-15

    measurement were successfully used where alloy fuel content was critical. Scrap handling had an important effect on the materials balance, by which fuel content was confirmed and good accountability was assured. Records and handling procedures, including batching and physical marking methods, were formulated in a manner that assisted the fabricator in criticality control. (author) [French] Grace aux efforts intenses qui ont ete accomplis au cours des 15 dernieres annees dans le domaine de la technologie des elements de combustible par le Laboratoire national d'Oak Ridge, il a ete possible d'etablir des methodes rationnelles de fabrication et de controle des combustibles eraichis, qui trouvent une iaige application dans la fabrication industrielle des elements de combustible a l'heure actuelle. Des techniques eprouvees de manipulation du combustible enrichi en alliages, en dispersion et sous forme d'oxyde en vrac ont ete mises au point et appliquees a l'etude et a la' fabrication des prototypes d'elements combustibles utilises pour le demarrage du reacteur d'essai de materiaux, du reacteur a protection constituee par la masse du ra- lentisseur ou reacteur piscine, du reacteur de puissance transportable construit pat V, du reacteur protection en tour, du reacteur expose a la Conference de Geneve, du reacteur a haut flux pour la production de radioisotopes et du reacteur experimental refroidi par un gaz. L'experience acquise est la base du present memoire qui traite essentiellement des problemes de controle des matieres qui se posent au cours de la fabrication de differents types d'elements de combustible a base d'uranium enrichi et montre comment ils ont ete resolus. Les objectifs principaux d'un systeme rationnel de controle des matieres sont les suivants: 1. reduire le plus possible le nombre des postes matiere a controler; 2. etablir des releves distincts pour chacune des phases principales des operations et les coordonner de maniere a pouvoir relever les ecarts avec un

  20. Results of the project 'combustion modelling' (BKM II); Ergebnisse des Projekts 'Brennkammermodellierung' (BKM II)

    Energy Technology Data Exchange (ETDEWEB)

    Noll, B.; Rachner, M.; Frank, P.; Schmitz, G.; Geigle, K.P.; Meier, W.; Schuetz, H.; Aigner, M. [DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Stuttgart (Germany). Inst. fuer Verbrennungstechnik; Kessler, R. [DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Goettingen (Germany). Inst. fuer Aerodynamik und Stroemungstechnik; Lehmann, B. [DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Koeln (Germany). Inst. fuer Antriebstechnik; Forkert, T. [DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Koeln (Germany). Simulation und Softwaretechnik

    2002-07-01

    In the year 1996 the spheres of competence of several DLR-Institutes working in the areas of fluid dynamics, reaction kinetics, combustion, numerical methods and laser measuring techniques have been brought together while contributing to the internal DLR project 'combustion chamber modelling (BKM)', in order to proceed with the computational simulation of combustion processes in combustion chambers of gas turbines. The main issue was the development of a research code for numerical simulation of fluid flow in real combustion chambers. Here the development of computational models of physical and chemical processes was emphasized, among other processes the formation of soot was treated. Moreover, a worldwide outstanding database of measured data for the purpose of code validation has been created within the framework of the BKM project using the laboratory facilities of the DLR, which are in Germany unique for the experimental investigation of the various processes in combustion chambers of gas turbines. The project BKM is part of the specific DLR-programme 'energy'. With the successful completion of the first phase of the project in 1998, a second project phase of three years (BKM II) has been launched at the beginning of 1999. Here the work of the first phase continued and new topics were tackled. The second phase of the project was partly founded by the DLR-programme 'aeronautics'. (orig.) [German] Im Jahr 1996 wurden die Faehigkeiten mehrerer DLR-Institute auf den Gebieten Stroemungsmechanik, Reaktionskinetik, Verbrennung sowie Numerische Verfahren und Laser-Messverfahren in dem DLR-internen Projekt 'Brennkammermodellierung' (BKM) zusammengefuehrt, um die rechnerische Simulation der Verbrennungsvorgaenge in Gasturbinen-Brennkammern voranzutreiben. Dabei war die Entwicklung eines Forschungscodes zur numerischen Simulation von realen Brennkammerstroemungen das vorrangige Ziel der Arbeiten. Ein besonderes Schwergewicht lag

  1. Detection of radioactive gases in the CO{sub 2} cooling the reactors G 2 - G 3; Detection des gaz radioactifs dans le CO{sub 2} de refroidissement des piles G2 - G3

    Energy Technology Data Exchange (ETDEWEB)

    Pouthier, J; Rossi, J [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

    1968-07-01

    The carbon dioxide cooling the reactors G2 - G3 contains activation gases and fission gases. It is of interest to know their concentration, for example to be able to deduce rapidly the norms which would have to be applied in the case of an incident in the circuit. Gas-phase chromatography is applied daily for carrying out analyses. The chromatogram has separate peaks due to tritium, argon 41, krypton 85 and the 133 and 135 isotopes of xenon. By integrating each peak it is possible to calculate the specific activity of each product. The construction of an apparatus for carrying out continuous measurements is under consideration. (authors) [French] Le gaz carbonique, refroidissant les reacteurs G2 - G3, contient des gaz d'activation et des gaz de fission. Il est interessant de connaitre leur teneur par exemple pour etre en mesure de deduire rapidement les normes qu'il y aurait lieu d'appliquer en cas d'incidents sur le circuit. La methode de chromatographie en phase gazeuse est employee quotidiennement pour faire des analyses. Le chromatogramme se presente sous forme de pics distincts dus au tritium, a l'argon 41, au krypton 85 et aux isotopes 133 et 135 du xenon. L'integration de chaque pic permet de calculer l'activite specifique de chaque compose. Il est envisage de construire un appareil pour des mesures en continu. (auteurs)

  2. Influence de la nature des fuels lourds sur la qualité de leur combustion Influence of Heavy Fuel Oil Composition on Particulate Emissions

    Directory of Open Access Journals (Sweden)

    Feugier A.

    2006-11-01

    Full Text Available A partir d'études de combustion de fuels lourds numéro 2 effectuées dans une chaudière de 1 MW et dans un foyer de 0,1 MW, on conclut que le résidu de Carbone Conradson (CCR des fuels est un bon indicateur de leur combustibilité, mais qu'il n'est pas suffisant dans tous les cas, c'est-à-dire que pour un même CCR, on peut mesurer des valeurs différentes en indice pondéral. Plusieurs interpréta. tions possibles ont été proposées et vérifiées : a Le résidu de Carbone Conradson, résultat d'une pyrolyse lente, est une procédure qui n'est pas suffisamment représentative des conditions réelles. Or, en soumettant un certain nombre de fuels à une pyrolyse flash (technique de la grille chauffée, on observe une bonne corrélation entre la quantité de résidu résultant et le CCR. Donc, ce dernier reste un bon indicateur de combustibilité. b Pour les fuels ex résidu atmosphérique, ex résidu sous-vide et ex désasphaltage, on détermine de satisfaisantes corrélations entre le CCR et certaines caractéristiques physico-chimiques de la fraction lourde des fuels (point de coupe choisi 450°C : polyaromaticité (mesurée par RMN du Carbone 13, C/H, masse moléculaire. Cependant, les fuels de visco-réduction satisfont à d'autres corrélations, de même que les résidus de vapocraquage. Donc, pour ces classes de fuels, on peut prévoir des anomalies entre indice pondéral et CCR, ce qui est observé dans certains équipements. c On observe que pour une même valeur de CCR, la proportion relative entre fractions légères et fractions lourdes des fuels peut parfois varier très sensiblement avec pour conséquence des modifications dans les cartes de richesse et de température des flammes résultantes, et donc des variations dans les émissions particulaires. L'importance de telles variations dépendra des types de brûleurs et de chambres de combustion dans lesquelles la flamme se développera. On the basis of combustion runs of

  3. Combustion and environment. The answers from the energy and equipment suppliers; Combustion et environnement. Les reponses des fournisseurs d`energie et d`equipements

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This paper is a reprint of an article published in `Energie Plus` magazine which questions the capability of commercial fuels and combustion equipments (central heating plants, burners, turbines and engines) available today of respecting the limit values of pollutant emissions (SO{sub x}, NO{sub x}, CO, dusts) of forthcoming regulations. An analysis of the situation is given separately for the fuels (natural gas, coal, heavy fuels) with a stress on the competition aspects, and for the combustion systems (turbines, diesel and gas engines, central heating plants). (J.S.)

  4. Design of an hybrid source with fuel cell and super-capacitors; Conception d'une source hybride utilisant une pile a combustible et des supercondensateurs

    Energy Technology Data Exchange (ETDEWEB)

    Thounthong, Ph

    2005-12-15

    The design and testing of a purely super-capacitor energy storage device as auxiliary power source in electrical vehicle applications having a PEM fuel cell as main source are presented. The two control strategies are explained. The control algorithms are that fuel cell is simply operating in almost steady state conditions in order to lessen the mechanical stresses of fuel cell and to ensure a good synchronization between fuel flow and fuel cell current. Super-capacitors are functioning during absence of energy from fuel cell, transient energy delivery or transient energy recovery. The system utilizes two modules of SAFT super-capacitive storage device. This device is connected to a 42 V DC bus by a 2-quadrant dc/dc converter, and fuel cell is connected to the dc bus by a boost converter. The system structure is realized by analogical current loops and digital control (dSPACE) for voltage loops and estimation algorithms. Experimental results with a 500 W PEM fuel cell point out the slow dynamics naturally of fuel cell because of thermodynamic and mechanical operation, and also substantiate that the super-capacitors can improve dynamics and power conditioning for automotive electrical system. (author)

  5. Modelling porous active layer electrodes of proton exchange membrane fuel cells; Modelisation des couches actives d'electrodes volumiques de piles a combustible a membrane echangeuse de protons

    Energy Technology Data Exchange (ETDEWEB)

    Bultel, Yann

    1997-07-01

    This work focusses on the modeling of mass, charge and heat transfer in the active layers of the volume electrodes of proton exchange membrane fuel cells (PEMFC). A first part describes the structure of fuel cells and the physico-chemical processes taking place at the electrodes. An analysis of the classical models encountered in the literature shows that they all assume that the electro-catalysts is uniformly distributed in a plane or in volume. In a second part, the modeling of mass and charge transport phenomena has been carried out with a numerical calculation software which uses the finite-elements method and which allows to take into consideration the discrete distribution of the catalyst in nano-particulates. The simulations show the limitations of the catalyst use because of the diffusion and ionic ohmic drop both at the electrolyte and particulates scale. In order to improve the modeling of PEMFC fuel cells, the classical models have been modified to consider these local contributions. They require only simple numerical methods, like the finite-differences one. When applied to the oxygen reduction at the cathode or to the hydrogen oxidation at the anode, these models allow to determine the kinetics parameters (exchange current densities and slopes of the Tafel lines) after correction of the active layer diffusion. A modeling of the heat transfers at the active layers scale is proposed. The model takes into account the convective heat transfers between the solid phases and the gas, the electro-osmosis water transfer, and the generation of heat by joule effect and by the electrochemical reactions. Finally, the last chapter presents a study of the reaction mechanisms in the case of porous electrodes using the impedances method. Numerical and analytical models have been developed to calculate the electrode impedances and are applied to the study of oxygen reduction and hydrogen oxidation. (J.S.)

  6. The promises of fuel cells seduce the electronics manufacturers; Les promesses des piles a combustible seduisent les geants de l'electronique

    Energy Technology Data Exchange (ETDEWEB)

    Chalmet, E.; Maridet, R.

    2001-07-01

    The cell using the hydrogen seems to be an attractive alternative energy source. Useful for the portable telephones, the automobiles or in the houses, it may cover a market of 60 milliards of dollars in 2010. (A.L.B.)

  7. Degradation mechanisms of sulfonated poly-aromatic membranes in fuel cell; Mecanismes de degradation des membranes polyaromatiques sulfonees en pile a combustible

    Energy Technology Data Exchange (ETDEWEB)

    Perrot, C

    2006-11-15

    Fuel cell development requires an improvement in the electrode-membrane assembly durability which depends on both the polymer used and the fuel cell operating conditions. The origin of the degradation can be either electrochemical, chemical and/or mechanical. This study deals with the understanding of alternative membranes ageing mechanisms, i.e. non fluorinated membranes, such as sPEEK and sPI. For this kind of membranes, the first process is chemical. Understanding these mechanisms is the first essential step to develop more stable structures. An original approach is developed to overcome the analytical difficulties encountered with polymers. It consists in studying the degradation mechanism on model structures. Ageing are carried out in water, with H{sub 2}O{sub 2} in some cases (identified as a cause of membrane chemical ageing in the fuel cell system), and at different temperatures. The approach consists in separating the different products formed by chromatography. Then they are identified (NMR, IR, MS) and quantified. This method allows us to establish the ageing mechanism. We show that the ageing of a sPEEK structure mainly results from an attack by end chains which spreads to the whole. This mechanism is confirmed on ex-situ and in-situ aged membranes. These two kinds of ageing lead to an important decrease in polymerisation degree (determined by SEC). Formation of the same degradation products is observed. In fuel cells, a heterogeneous degradation is noticed. It takes place mainly on the cathode side. sPI are known for their high sensitivity to hydrolysis. Nevertheless, we highlight a limited degradation at 80 Celsius degrees due to the recombination of hydrolyzed species at this temperature. (author)

  8. Design of an hybrid source with fuel cell and super-capacitors; Conception d'une source hybride utilisant une pile a combustible et des supercondensateurs

    Energy Technology Data Exchange (ETDEWEB)

    Thounthong, Ph.

    2005-12-15

    The design and testing of a purely super-capacitor energy storage device as auxiliary power source in electrical vehicle applications having a PEM fuel cell as main source are presented. The two control strategies are explained. The control algorithms are that fuel cell is simply operating in almost steady state conditions in order to lessen the mechanical stresses of fuel cell and to ensure a good synchronization between fuel flow and fuel cell current. Super-capacitors are functioning during absence of energy from fuel cell, transient energy delivery or transient energy recovery. The system utilizes two modules of SAFT super-capacitive storage device. This device is connected to a 42 V DC bus by a 2-quadrant dc/dc converter, and fuel cell is connected to the dc bus by a boost converter. The system structure is realized by analogical current loops and digital control (dSPACE) for voltage loops and estimation algorithms. Experimental results with a 500 W PEM fuel cell point out the slow dynamics naturally of fuel cell because of thermodynamic and mechanical operation, and also substantiate that the super-capacitors can improve dynamics and power conditioning for automotive electrical system. (author)

  9. Modélisation de la combustion de fuels lourds prenant en compte la dispersion des asphaltènes Modeling Heavy Fuel-Oil Combustion (While Considering Or Including Asphaltene Dispersion

    Directory of Open Access Journals (Sweden)

    Audibert F.

    2006-11-01

    Full Text Available Divers modèles, ayant pour but de prédire le taux d'imbrûlés solides lors de la combustion du fuel lourd, ont été mis au point dans le passé. Les paramètres entrant en ligne de compte sont le plus souvent les teneurs en résidus lourds hydrocarbonés (asphaltènes précipités au pentane ou à l'heptane et carbone Conradson et en métaux : c'est le cas des modèles Exxon et Shell développés respectivement en 1979 et 1981. D'autres modèles tiennent compte, en plus de la composition du fuel, de son mode d'atomisation, de son mode de diffusion dans le foyer et de la cinétique de combustion : on peut citer les travaux du Laboratoire Energie du MIT publiés en 1986. Néanmoins, ces facteurs ne sont pas les seuls à intervenir : l'expérience a montré que l'état de dispersion des asphaltènes peut jouer également un grand rôle, notamment dans le cas d'installations de combustion à injection mécanique, pour lesquelles la dispersion des gouttelettes n'est pas aussi fine que pour des installations munies d'une injection assistée par la vapeur. Cette influence de la dispersion des asphaltènes sur la combustion a été mise en évidence dans le passé par l'utilisation d'additifs dispersants et également par la combustion de fuels lourds constitués par dilution d'asphaltes précipités au pentane avec un gas-oil de cracking catalytique de raffinerie (LCO. Ce sont ces fuels que l'on a considérés dans la présente étude. L'effet de ce facteur dispersion n'a pas été quantifié jusqu'alors, la difficulté étant de définir une grandeur mesurable représentant la répartition des agglomérats d'asphaltènes. Dans cette étude, on a essayé en un premier temps de faire une approche fractale de la répartition des asphaltènes à partir de clichés (préparés par la société Total, cette méthode ayant déjà été utilisée avec succès pour décrire des structures d'aspects comparables. Malheureusement, on s'est heurté à des

  10. Study of the strategies and controls of fuel cell systems associated with traction; Etude des strategies et des structures de commande pour le pilotage des systemes energetiques a Pile a Combustible (PAC) destines a la traction

    Energy Technology Data Exchange (ETDEWEB)

    Lachaize, J.

    2004-09-15

    This work falls into project COPPACE (Contribution to the Control of Embedded Fuel cell) carried out by ALSTOM in partnership with the LEEI-INPT and the CEA and supported by the ADEME. The study deals with the modelling and the control of a Fuel Cell system (flow, pressure, temperature) and the definition of the control laws for the static inverters associated with the traction of power train. We develop then a strategy of management of energy by taking into account the criteria of the hydrogen consumption or energy stored in the ultracaps. Each step is verified by total simulation according to a specific profile of mission and a precise model of fuel cells which has been simplified to reduce the computing time. The control of this system is defined by a separate treatment of the components, to finalize the total function objective. The results of simulations show that the system can follow the requested power while controlling the critical elements. (author)

  11. Air pollution emission reduction techniques in combustion plants; Technique de reduction des emissions de polluants atmospheriques dans les installations de combustion

    Energy Technology Data Exchange (ETDEWEB)

    Bouscaren, R. [CITEPA, Centre Interprofessionnel Technique d`Etudes de la Pollution Atmospherique, 75 - Paris (France)

    1996-12-31

    Separating techniques offer a large choice between various procedures for air pollution reduction in combustion plants: mechanical, electrical, filtering, hydraulic, chemical, physical, catalytic, thermal and biological processes. Many environment-friendly equipment use such separating techniques, particularly for dust cleaning and fume desulfurizing and more recently for the abatement of volatile organic pollutants or dioxins and furans. These processes are briefly described

  12. Piles of objects

    KAUST Repository

    Hsu, Shu-Wei

    2010-01-01

    We present a method for directly modeling piles of objects in multi-body simulations. Piles of objects represent some of the more interesting, but also most time-consuming portion of simulation. We propose a method for reducing computation in many of these situations by explicitly modeling the piles that the objects may form into. By modeling pile behavior rather than the behavior of all individual objects, we can achieve realistic results in less time, and without directly modeling the frictional component that leads to desired pile shapes. Our method is simple to implement and can be easily integrated with existing rigid body simulations. We observe notable speedups in several rigid body examples, and generate a wider variety of piled structures than possible with strict impulse-based simulation. © 2010 ACM.

  13. Decontamination of irradiated-fuel processing waste using manganese dioxide hydrate; Decontamination des effluents de traitement des combustibles irradies par le bioxyde de manganese hydrate

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, J M; Gaudier, J F [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

    1969-07-01

    The 'manganese dioxide' process is designed to replace the 'calcium carbonate' treatment for low and medium activity wastes. The objective to attain during the research for a new process was the diminution of the volume of the sludge without decreasing the decontamination factor of the wastes. The new process involves addition in series of twice over 100 ppm of Mn{sup 2+} in the waste which has previously been made basic and oxidizing; the precipitate formed in situ is separated after each addition. The process has the advantage of increasing the decontamination of strontium. The treatment can be used in a plant including two decantation units and has given effective results when applied in such a plant. (author) [French] Le procede au ''bioxyde de manganese'' est destine a remplacer le traitement ''carbonate de calcium'' dans les effluents de moyenne activite. L'objectif poursuivi lors de la recherche d'un procede nouveau etait de diminuer le volume des boues sans diminuer le facteur de decontamination des effluents. Le nouveau traitement consiste a effectuer en cascade sur les effluents rendus basiques et oxydants une double precipitation de 100 ppm de Mn{sup 2+} avec separation intermediaire du precipite. Il presente en outre l'avantage d'ameliorer la decontamination en strontium. Le traitement est utilisable dans la chaine des deux decanteurs et a donne satisfaction lors de son exploitation industrielle. Le volume des boues seches a ete reduit d'un facteur 3 a 4 par rapport au traitement carbonate. (auteur)

  14. The pile EL3

    International Nuclear Information System (INIS)

    Robert, J.; Raievski, V.

    1959-01-01

    The programme of the high flux laboratory pile EL3 was laid down in october 1954. It is a heavy-water moderated and cooled pile. The fuel rods are of uranium metal with 1.6 per cent - 2 per cent of molybdenum, with aluminium canning. The maximum thermal flux in the moderator is 10 14 n/cm 2 /s. Studies began in january 1955, construction in may 1955, and the first divergence took place in July 1957. This report gives a general description of the pile and its adjacent buildings, the physical study of the pile, and certain technological studies carried out for the construction of EL3. (author) [fr

  15. Windscale pile core surveys

    International Nuclear Information System (INIS)

    Curtis, R.F.; Mathews, R.F.

    1996-01-01

    The two Windscale Piles were closed down, defueled as far as possible and mothballed for thirty years following a fire in the core of Pile 1 in 1957 resulting from the spontaneous release of stored Wigner energy in the graphite moderator. Decommissioning of the reactors commenced in 1987 and has reached the stage where the condition of both cores needs to be determined. To this end, non-intrusive and intrusive surveys and sampling of the cores have been planned and partly implemented. The objectives for each Pile differ slightly. The location and quantity of fuel remaining in the damaged core of Pile 1 needed to be established, whereas the removal of all fuel from Pile 2 needed to be confirmed. In Pile 1, the possible existence of a void in the core is to be explored and in Pile 2, the level of Wigner energy remaining required to be quantified. Levels of radioactivity in both cores needed to be measured. The planning of the surveys is described including strategy, design, safety case preparation and the remote handling and viewing equipment required to carry out the inspection, sampling and monitoring work. The results from the completed non-intrusive survey of Pile 2 are summarised. They confirm that the core is empty and the graphite is in good condition. The survey of Pile 1 has just started. (UK)

  16. Natural gas combustion and indoor air quality in domestic premises; Combustion du gaz naturel et qualite de l'air a l'interieur des habitations

    Energy Technology Data Exchange (ETDEWEB)

    Occhio, L.; Riva, A. [Snam, (Italy); Canci, F.; Scevarolli, V. [Italgas, Torino (Italy)

    2000-07-01

    Indoor air quality depends on many factors; combustion appliances are one of the sources of emissions inside dwellings. Their installation is regulated by UNI-CIG standards which also establish the ventilation and aeration requirements needed to guarantee the safety and healthiness of the environment. In order to critically evaluate the effect on indoor air quality of using gas appliances under different operational regimes and in different types of building, Snam and Italgas have developed a research project in co-operation with Enitecnologie and Turin Polytechnic, even to provide theoretical and experimental support for standardisation activities. The results of the presented research include experimental measurements made in real buildings, mathematical modelling and analysis of Italian and international literature. The results show that use of combustion appliances has little influence on indoor air quality and does not affect people's health. (authors)

  17. Dispersions of Oxides in Oxide Matrices as High-Temperature Reactor Fuels; Dispersions d'oxyde dans des matrices d'oxyde, utilisees comme combustibles dans des reacteurs a haute temperature; Dispersiya okisej v okislovykh matritsakh v kachestve topliva dlya vysokotemperaturnogo reaktora; Empleo de dispersiones de oxidos en matrices de oxidos, como combustibles para reactores de elevada temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Williams, J. [Atomic Energy Research Establishment, Harwell (United Kingdom)

    1963-11-15

    The potential usefulness of dispersions of PuO{sub 2}, UO{sub 2} and ThO{sub 2} in matrices of BeO, Al{sub 2}O{sub 3}, MgO and SiO{sub 2} is reviewed in terms of fuel integrity and fabrication. Dimensional stability and fission-product retentivity are the two features most important to fuel integrity. Compatibility of the constituents of the fuels with one another and with the coolant will influence dimensional stability, but oxide fuels are well favoured in these respects. Dimensional changes under irradiation will contain contributions from neutron and fission fragment damage to the matrix, from radiation damage to the fissile-fertile phase and from agglomerated fission-product gases. Thermal stresses are also capable of effecting changes in shape. However, information on mechanisms for stress relaxation is too limited to enable any reasonable theoretical assessment of behaviour to be made. Both light irradiation and high burn-up studies of fission-product release from the fissile-fertile oxides have concerned themselves mainly with the gaseous products, chiefly xenon. Data on the release of other fission products is very limited as is also information on the movement of fission products in general through the potential matrix materials. Studies of the permeability of sintered pure oxides indicate that densities of at least 95% theoretical density (maybe even 98%) will be needed to eliminate open porosity in such matrices. A variety of techniques are available for the preparation of fissile-fertile particles, for their coating and for their incorporation into high-density matrices. Work on laboratory-scale fabrication processes is well advanced. (author) [French] L'auteur examine la possibilite d'utiliser des combustibles disperses - PuO{sub 2}, UO{sub 2} et ThO{sub 2} et matrices de BeO, Al{sub 2}O{sub 3}, MgO et SiO{sub 2} - dans des reacteurs a haute temperature, au point de vue de l'integrite du combustible et de sa transformation. La stabilite dimensionnelle

  18. Experimental and numerical study of the active control of jets inside combustion chambers; Etude experimentale et numerique du controle actif de jets dans des chambres de combustion

    Energy Technology Data Exchange (ETDEWEB)

    Faivre, V

    2003-12-15

    Combustion instabilities occur when the flame heat release couples with the acoustic waves propagating in the combustion chamber. This phenomenon can lead to strong vibrations and noise but also, sometimes, to the complete combustion device failure. That is the reason why so many studies focus on the control of those instabilities. The method chosen in this study consists in an active control device (or set of actuators) having a strong effect on the mixing of the burner exhaust flow with the ambient fluid. The model configuration studied consists in a non reactive jet of air controlled by four small tangential secondary jets. Experiments have been carried out to optimize the control device geometry. The configuration identified as the most efficient, in terms of mixing enhancement, has been simulated through Large Eddy Simulations (LES). The objective of the numerical part of the present work is double. First, the numerical simulations provide a better understanding of the phenomena occurring when the control is on. Then, it is shown that LES can be considered as a tool to predict the effects of a control device on a flow. (author)

  19. A Contribution to Turbulent Combustion: Premixed Flames and Material Surfaces Une contribution à la combustion turbulente : flammes prémélangées et surfaces des matériaux

    Directory of Open Access Journals (Sweden)

    Nicolleau F.

    2006-11-01

    from each other. The turbulent diffusion process is very active to create new burning zones. This diffusion process is closely related to both the intensity and the length scale of the turbulent field. That explains the dominant role of turbulence and the adaptation of the burning rate to the rotation speed in combustion engines. Additional information useful for the reader is reported in Appendices I and II. Le comportement des flammes de prémélange a été examiné par de nombreux auteurs. En fait, le problème de la combustion en milieu turbulent repose pour beaucoup sur des comparaisons d'échelles. Dans le présent article, une première étude porte sur l'évolution d'une surface matérielle (qui peut être assimilée sous certaines conditions à une surface de flamme. On utilise successivement une démarche analytique et une démarche numérique. On constate alors la rapidité d'extension de la surface et le rôle prépondérant des petites échelles ce que confirme l'étude analytique. Les risques d'extinction sont prédits en général par comparaison d'échelles. D'une simulation directe conduite sur un cas spécifique, Poinsot confirme l'idée que ce ne sont pas les structures ayant les échelles caractéristiques de la flamme qui sont les plus redoutables, mais des structures de taille quelque peu plus grande. Dans un précédent article, le rôle cumulé des gradients locaux avait été signalé. Nous donnons à ce concept une forme quantitative en utilisant le ß modèle lequel définit un taux d'occupation de l'espace en fonction du rang (et donc de la dimension de structures. Un calcul de gradient cumulé redonne la prédiction de Poinsot. Enfin, le même ß modèle est utilisé pour définir une nouvelle zone dans la région de combustion distribuée. Des balles fluides brûlent isolément tandis qu'un processus de diffusion lié très étroitement au champ turbulent et à son intensité crée d'autres points d'allumage. Le mécanisme explique l

  20. Piles of objects

    KAUST Repository

    Hsu, Shu-Wei; Keyser, John

    2010-01-01

    We present a method for directly modeling piles of objects in multi-body simulations. Piles of objects represent some of the more interesting, but also most time-consuming portion of simulation. We propose a method for reducing computation in many

  1. The fuel cell; La pile a combustible

    Energy Technology Data Exchange (ETDEWEB)

    Boursin, P.

    2005-07-01

    This document is an exhaustive review of the history of fuel cells from 1802 to 2004. It focusses mainly on the automotive applications and supplies many technical details about each prototype of fuel cell and/or vehicle. (J.S.)

  2. Some physics aspects of cermet and ceramic fast systems; Quelques aspects de la physique des reacteurs a neutrons rapides utilisant des cermets et des ceramiques comme combustibles; Nekotorye fizicheskie aspekty kermetnykh i keramicheskikh sistem na bystrykh nejtronakh; Algunos aspectos fisicos de los sistemas rapidos a base de combustibles cermet y ceramicos

    Energy Technology Data Exchange (ETDEWEB)

    Codd, J; James, M F; Mann, J E [United Kingdom Atomic Energy Authority, Reactor Group (United Kingdom)

    1962-03-15

    The characteristics of a system using an iron-based oxide cermet as fuel material are discussed. A transport theory investigation to develop methods of predicting the effect of core heterogeneity on reactivity and flux distribution is described. Some preliminary calculations are also given of resonance self-shielding and Doppler temperature effects in a cermet system. (author) [French] Les auteurs etudient les caracteristique s d'un reacteur utilisant comme combustible un cermet d'oxydes a armature de fer. Ils exposent une application de la theorie du transport a la mise au point des methodes permettant de prevoir l'effet de l'heterogeneite du coeur sur la reactivite et sur la distribution du flux. Ils donnent egalement quelques calculs preliminaires d'effets d'autoprotection due a la resonance et d'effet Doppler du a la chaleur dans un reacteur utilisant un cermet. (author) [Spanish] La memoria discute las caracteristicas de un sistema que emplea como combustible un oxido tipo cermet a base de hierro. Describe una investigacion de la teoria de transporte con miras a desarrollar metodos para evaluar el efecto de la heterogeneidad del cuerpo sobre la reactividad y la distribucion de flujo. Tambien da algunos calculos preliminares de los efectos del autoblindaje por resonancia y de la temperatura de Doppler en un sistema de tipo cermet. (author) [Russian] Obsuzhdayutsya kharakteristiki sistemy, ispol'zuyushchej v kachestve toplivnogo materiala oksidnye kermety, razrabotannye na osnove zheleza. Opisyvaetsya issledovanie teorii perenosa, chtoby razvit' metody predskazaniya vliyaniya geterogennosti aktivnoj zony na reaktivnost' i raspredelenie potoka. Dayutsya takzhe nekotorye predvaritel'nye raschety ehffektov rezonansnoj samozashchity i temperaturnogo ehffekta Dopplera v kermetnoj sisteme. (author)

  3. Combustion gas cleaning in the ceramic tile industry: technical guide; Nettoyage des fumees de combustion dans l'industrie ceramique: guide technique

    Energy Technology Data Exchange (ETDEWEB)

    Lezaun, F.J. [ENAGAS-Grupo Gas Natural (Spain); Mallol, G.; Monfort, E. [instituto de Tecnologia Ceramica, ITC (Spain); Busani, G. [Agenzia Regionale per la Prevenzione e l' Amiente, ARPA (Spain)

    2000-07-01

    This document presents a summary of a technical guide drawn up on combustion gas cleaning systems in ceramic frit and tile production. The guide describes the method to be followed for selecting the best possible solutions for reducing pollutant concentrations in different emission sources, in accordance with current regulatory requirements and the CET recommendation. There are three sources of combustion gas air emissions that need to be cleaned in ceramic tile and frit production and they are usually related to the following process stages: slip spray drying, tile firing and frit melting. The different nature of the emissions means that different substances will need to be cleaned in each emission. Thus, in spray drying and frit melting, the only species to be cleaned are suspended particles, while in tile firing, it is also necessary to reduce the fluorine concentration. The systems analysed in this guide are mainly wet cleaning systems, bag filters and electrostatic precipitators. In the study, the efficiency of these cleaning systems is compared at each emission source from a technical and economic point of view, and concrete solutions are put forward in each case, together with a list of suppliers of the technologies involved. (authors)

  4. Une installation expérimentale pour l'étude du traitement par combustion des fumées industrielles An Experimental Plant for Processing Industrial Fumes by Combustion

    Directory of Open Access Journals (Sweden)

    Morillon R.

    2006-11-01

    Full Text Available Le rejet à l'atmosphère d'effluents gazeux d'origine industrielle entraîne un accroissement sensible de la pollution atmosphérique ; en outre, il s'accompagne souvent d'une perte d'énergie lorsque l'élément polluant est un hydrocarbure. Dans ce cas, l'utilisation du gaz naturel pour le traitement par combustion des fumées industrielles apporte une solution élégante et souvent peu coûteuse grâce à la récupération d'énergie qu'il est possible de faire. La première partie de l'article rappelle les aspects théoriques de ce traitement ; en particulier, l'influence des divers éléments sur son efficacité y est discutée (composition de l'atmosphère polluée, température, temps de séjour, etc.. II apparaît ainsi que diverses conditions doivent être remplies simultanément pour obtenir une efficacité satisfaisante. Afin de disposer d'éléments d'ingénierie permettant de construire les unités de traitement les plus efficaces et les plus sûres possible, au coût le plus bas possible, la Direction des études et techniques nouvelles du Gaz de France a réalisé une installation expérimentale qui est présentée dans la deuxième partie de l'article. Enfin, quelques examples d'utilisation de cette installation expérimentale, qui constitue un nouvel outil de travail mis à la disposition des utisitateurs et des constructeurs, sont décrits dans la troisième partie de l'article. The discharge into the atmosphere of industrial waste gases causes substantially increased air pollution. Moreover, it is often accompanied by loss of energy when the polluting element is a hydrocarbon. In such cases, the use of natural gas for processing industrial fumes by combustion provides an elegant solution, which moy often prove economical too becouse of the recovery of energy it makes possible. The first part of this article reviews the theoretical aspects of such processing. The way in which its effectiveness is affected by various parameters

  5. Pollution active control: a strategy for a clean and efficient combustion; Le controle actif des polluants: une strategie pour une combustion propre et efficace

    Energy Technology Data Exchange (ETDEWEB)

    Lacas, F. [CNRS Ecole Centrale de Paris, 75 (France). Laboratoire E.M2.C

    1996-12-31

    The active control NOx reduction concept has been applied on two burners (20 kW and 840 kW), using a rotary valve enabling an excitation in the 100 to 1000 Hz band, that can be mounted on existing appliances such as domestic or industrial boilers. NOx level reduction may reach 15 pc for the 20 kW burner, 25 pc for the 840 kW burner with domestic fuel oil and 35 pc for the 840 kW burner using pyridine doped domestic fuel oil. Mechanisms are detailed through flow visualization, and consist mainly in an annular vortex inducing a fuel/air pre-mixing favourable to a large decrease in NOx generation level and establishing a staged process such as in re-burning processes. The pulsed combustion process may be also combined to other pollution control systems

  6. Construction and validation of detailed kinetic models for the combustion of gasoline surrogates; Construction et validation de modeles cinetiques detailles pour la combustion de melanges modeles des essences

    Energy Technology Data Exchange (ETDEWEB)

    Touchard, S.

    2005-10-15

    The irreversible reduction of oil resources, the CO{sub 2} emission control and the application of increasingly strict standards of pollutants emission lead the worldwide researchers to work to reduce the pollutants formation and to improve the engine yields, especially by using homogenous charge combustion of lean mixtures. The numerical simulation of fuel blends oxidation is an essential tool to study the influence of fuel formulation and motor conditions on auto-ignition and on pollutants emissions. The automatic generation helps to obtain detailed kinetic models, especially at low temperature, where the number of reactions quickly exceeds thousand. The main purpose of this study is the generation and the validation of detailed kinetic models for the oxidation of gasoline blends using the EXGAS software. This work has implied an improvement of computation rules for thermodynamic and kinetic data, those were validated by numerical simulation using CHEMKIN II softwares. A large part of this work has concerned the understanding of the low temperature oxidation chemistry of the C5 and larger alkenes. Low and high temperature mechanisms were proposed and validated for 1 pentene, 1-hexene, the binary mixtures containing 1 hexene/iso octane, 1 hexene/toluene, iso octane/toluene and the ternary mixture of 1 hexene/toluene/iso octane. Simulations were also done for propene, 1-butene and iso-octane with former models including the modifications proposed in this PhD work. If the generated models allowed us to simulate with a good agreement the auto-ignition delays of the studied molecules and blends, some uncertainties still remains for some reaction paths leading to the formation of cyclic products in the case of alkenes oxidation at low temperature. It would be also interesting to carry on this work for combustion models of gasoline blends at low temperature. (author)

  7. Effect of Ash on Oxygen Carriers for the Application of Chemical Looping Combustion to a High Carbon Char Effet des cendres sur l’activité des porteurs d’oxygène dans la combustion du charbon en boucle chimique

    Directory of Open Access Journals (Sweden)

    Rubel A.

    2011-02-01

    activity of the OCs and both OCs performed well. The results were promising for the application of CLC directly to solid fuels. L’application de la combustion en boucle chimique (CLC aux combustibles solides est actuellement étudiée à l’Université du Kentucky, au Centre de Recherche de l’Energie Appliquée (CAER dans le but de développer un procédé de gazéification/combustion en boucle chimique pressurisé (PCLC/G afin de générer de l’électricité à partir de charbon. Un des principaux aspects de la combustion en boucle chimique de combustibles solides est la compréhension de l’effet des cendres sur la réactivité des porteurs d’oxygène (OCs. L’effet des cendres sur la capacité de transfert d’oxygène et sur l’aptitude à oxyder le charbon est étudié avec deux porteurs d’oxygène à base d’oxydes de fer. Les cendres utilisées sont des cendres volantes provenant d’une centrale thermique au charbon. Les expériences sont réalisées dans un système composé d’une thermo-balance couplée à un spectrographe de masse (TGMS dans lequel on utilise d’abord 500 mg d’un mélange de cendres/porteurs d’oxygène à différentes concentrations de cendres allant jusqu’à 75 %. Le gaz réducteur est composé de 10 % de H2, 15 % de CO, 20 % de CO2 et de 55 % de Ar; et le gaz oxydant est composé de 20 % de O2 dans Ar. Les réactions d’oxydation/réduction sont quasi totales. D’après ces expériences, les cendres ont une activité propre de porteur d’oxygène, liée à la présence de fer dans les cendres, confirmée par les analyses DRX. Cela génère une augmentation du gain ou de la perte de masse du mélange pendant l’oxydation/réduction. Les vitesses d’oxydation/réduction augmentent avec la concentration des cendres à cause de l’augmentation de la porosité du mélange de porteurs d’oxygène avec les cendres, ce qui permet un meilleur accès des gaz réactifs sur les sites actifs des porteurs d’oxygène. Dans un

  8. Detection of tritium in the CO{sub 2} of the reactors G2/G3 using gas chromatography; La detection du tritium par chromatographie gazeuse dans le CO{sub 2} des piles G2/G3

    Energy Technology Data Exchange (ETDEWEB)

    Guillermin, P; Rossi, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    This gas-phase chromatographic method, based on the principle of the decomposition of a gas mixture into its pure constituents, makes it possible to identify and rapidly measure the tritium present in the heat-carrying fluid of the reactors G2/G3. The sensitivity limit corresponds to 5 x 10{sup -6} {mu}Ci/cm{sup 3} of tritiated gas, whereas the threshold reading of the D.C.C.A. is 10{sup -3} {mu}Ci/cm{sup 3} in the presence of {sup 41}A. This apparatus has interesting applications in the conditions where certain {beta} emitters (products of fission or of activation) interfere with the measurement of the tritium. It can easily be adapted to the detection of tritiated steam on condition that a reducing chemical treatment is applied for the atmospheric humidity. In fact, although this method is not as sensitive for the measurement of tritiated vapour as p-spectrometry in a scintillating medium, it may be set up very easily for measuring the C.M.A of tritium in air and is not affected by the presence of radio-active gases. (authors) [French] Cette methode de chromatographie en phase gazeuse, basee sur le principe de decomposition d'un melange gazeux en ses constituants purs, permet l'identification et la mesure rapide du tritium present dans le fluide caloporteur des piles G2/G3. La limite de sensibilite correspond a 5.10{sup -6} {mu}Ci/cm{sup 3} de gaz tritie, alors que le seuil de lecture du D.C.C.A. s'eleve a 10{sup -3} {mu}Ci/cm{sup 3} en presence de {sup 41}A. Cet appareillage presente un champ d'application interessant dans les domaines ou certains emetteurs {beta} (produits de fission ou d'activation) genent la mesure du tritium. Il peut s'adapter sans difficulte a la detection de la vapeur tritiee moyennant un traitement chimique reducteur de l'humidite atmospherique. En definitive, bien que cette methode ne soit pas aussi sensible pour la determination de la vapeur tritiee que la spectrometrie {beta} en milieu scintillant, elle permet de mesurer la C.M.A de

  9. Swimming-pool piles

    International Nuclear Information System (INIS)

    Trioulaire, M.

    1959-01-01

    In France two swimming-pool piles, Melusine and Triton, have just been set in operation. The swimming-pool pile is the ideal research tool for neutron fluxes of the order of 10 13 . This type of pile can be of immediate interest to many research centres, but its cost must be reduced and a break with tradition should be observed in its design. It would be an advantage: - to bury the swimming-pool; - to reject the experimental channel; - to concentrate the cooling circuit in the swimming-pool; - to carry out all manipulations in the water; - to double the core. (author) [fr

  10. Radiative transfer modelling in combusting systems using discrete ordinates method on three-dimensional unstructured grids; Modelisation des transferts radiatifs en combustion par methode aux ordonnees discretes sur des maillages non structures tridimensionnels

    Energy Technology Data Exchange (ETDEWEB)

    Joseph, D.

    2004-04-01

    The prediction of pollutant species such as soots and NO{sub x} emissions and lifetime of the walls in a combustion chamber is strongly dependant on heat transfer by radiation at high temperatures. This work deals with the development of a code based on the Discrete Ordinates Method (DOM) aiming at providing radiative source terms and wall fluxes with a good compromise between cpu time and accuracy. Radiative heat transfers are calculated using the unstructured grids defined by the Computational Fluid Dynamics (CFD) codes. The spectral properties of the combustion gases are taken into account by a statistical narrow bands correlated-k model (SNB-ck). Various types of angular quadrature are tested and three different spatial differencing schemes were integrated and compared. The validation tests show the limit at strong optical thicknesses of the finite volume approximation used the Discrete Ordinates Method. The first calculations performed on LES solutions are presented, it provides instantaneous radiative source terms and wall heat fluxes. Those results represent a first step towards radiation/combustion coupling. (author)

  11. Study of the dynamic behaviour of the reactor Rapsodie; Etude du comportement dynamique de la pile rapsodie

    Energy Technology Data Exchange (ETDEWEB)

    Abdon, R; Chaigne, M [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1964-07-01

    . The investigation of the control, carried out on analog computer, served to determine the different possible means of starting and changing the conditions of the reactor as well as its automatic control. The calculations were examined in the totality by the construction of a training simulator composed of a board similar to the control board of the reactor, all of whose commands (reactivity and flows) work on an analogue computer which resolves in the real time the dynamic equations of the reactor and which reproduces simultaneously all the parameters representing the state of the installation (power, period, temperatures, etc. ) in the case of various incidents as well as under normal conditions of functioning. (authors) [French] On sait que le developpement des reacteurs surgenerateurs a neutrons rapides pose des problemes nouveaux d'une part dans les domaines mecanique et thermique et d'autre part en ce qui concerne leur comportement dynamique et leur surete. La pile RAPSODIE a ete l'objet de tres nombreuses etudes dynamiques effectuees sur machines analogiques et digitales, pour deux versions du combustible (metal et oxyde). Apres elaboration des modeles mathematiques representatifs de l'ensemble de l'installation (bloc pile et circuit de refroidissement) tant du point de vue neutronique que du point de vue thermodynamique, on a mis au point les schemas analogiques et les codes digitaux utilisables pour mener a bien les simulations d'incidents, de conduite et de stabilite du reacteur. On s'est attache, par rapport aux methodes habituelles a obtenir une precision plus grande, par un decoupage en zones plus fines, par l'emploi de formulations plus representatives du systeme reel, voire solubles analytiquement. Les etudes d'incidents ont ete effectuees par voie analogique pour l'ensemble de l'installation et par voie digitale pour l'etude du bloc pile seul ou de l'installation fonctionnant avec un seul circuit thermique. Un programme complementaire special - qui, a

  12. 3-D modeling of parietal liquid films in internal combustion engines; Modelisation tridimensionnelle des films liquides parietaux dans les moteurs a combustion interne

    Energy Technology Data Exchange (ETDEWEB)

    Foucart, H

    1998-12-11

    To simulate the air-fuel mixing in the intake ports and cylinder of an internal combustion engines, a wall fuel liquid film model has been developed for integration in 3D CFD codes. Phenomena taken into account include wall film formation by an impinging spray without splashing effect, film transport such as governed by mass and momentum equations with hot wall effects, and evaporation considering energy equation with an analytical mass transfer formulation developed here. A continuous-fluid method is used to describe the wall film over a three dimensional complex surface. The basic approximation is that of a laminar incompressible boundary layer; the liquid film equations are written in an integral form and solved by a first-order ALE finite volume scheme; the equation system is closed without coefficient fitting requirements. The model has been implemented in a Multi-Block version of KIVA-II (KMB) and tested against problems having theoretical solutions. Then in a first step, it has been compared to the measurements obtained in a cylindrical pipe reproducing the main characteristics of SI engine intake pipe flow and in a second step, it has been compared to the Xiong experiment concerning the film evaporation on a hot wall. The film behaviour is satisfactory reproduced by the computations for a set of operating conditions. Finally, engine calculations were conducted showing the importance of including a liquid film model for the simulations. (author) 54 refs.

  13. Experiments prior to construction of the Rapsodie reactor (1962); Experiences preliminaires a la construction de la pile rapsodie (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Vautrey, L; Zaleski, C P [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1962-07-01

    ', maintes etudes experimentales, d'ordre hydraulique, thermique et mecanique ont ete faites ou sont envisagees pour verifier la validite des principes adoptes dans l'avant rojet. Ce memoire traite des plus importants: 1. Etudes d'elements de circuits de refroidissement: pompes a sodium (mecaniques ou electromagnetiques), eohangeurs Na-Nak et Nak-air, appareils de mesures (debits, temperatures), circuits de purification du sodium, etc. 2. Etudes de refroidissement des assemblages combustibles et fertiles; a) etude du refroidissement par le sodium, menee a l'aide de maquettes hydrauliques (echelle 1 ou superieure a 1), reproduisant l'ecoulement du fluide de refroidissement dans les tuyauteries, a l'amont des elements combustibles et fertiles et a l'interieur de ceux i; b) etude du refroidissement par gaz et par immersion dans le plomb, utilise pendant les operations de la manutention et de stockage. 3. Etudes de dispositifs speciaux du reacteur: joint tournant liquefiable, parties de mecanismes des barres de controle. 4. Etude du bloc pile et des circuits de refroidissement dans leur ensemble. Cette etude doit commencer a la fin de cette annee. Les installations, en cours d'achevement, reproduisent, a l'echelle 1, celles prevues dans le projet et comportent: le bloc pile auquel est associe un circuit de sodium a grand debit permettant les essais de duree et la realisation de chocs thermiques et, en annexe, un circuit d'essai de barres de controle; l'installation complete des circuits de refroidissement de 1 MW et de 10 MW dont les performances, dans les differents cas de fonctionnement, pourront etre verifiees. 5. Etude de securite effectuee sur une maquette a 1 echelle 3/10 de l'ensemble du bloc pile et de ses protections, dont l'objet est la limitation des consequences d'une hypothetique liberation d'energie accidentelle, d'allure explosive. (auteurs)

  14. Decontamination of irradiated fuel processing waste using lead paraperiodate; Decontamination des effluents de traitement des combustibles irradies par le paraperiodate de plomb

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, J M [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

    1967-07-01

    The process is designed to eliminate ruthenium. It consists in an oxidation using para-periodic acid whose excess, acting then as a carrying-over agent, is precipitated in the form of a lead salt at a pH of 5 or 6. This process makes it possible to precipitate 80 to 98 per cent of the ruthenium which is not removed by the conventional precipitation techniques which follow it. If the waste is a reducing agent, it is pre-oxidized using ozone or potassium permanganate. The process was developed at Marcoule in 1963 and has since 1965 been applied industrially; its cost price is of the same order of magnitude as conventional processes and its results are satisfactory. (author) [French] Le procede est destine a l'elimination du ruthenium. Il consiste en une oxydation par l'acide par paraperiodique dont l'exces, jouant alors le role d'entraineur, est precipite sous forme de sel de plomb a pH 5 ou 6. Ce traitement permet de precipiter 80 a 98 pour cent du ruthenium rebelle aux traitements de precipitation classique, qui doivent le suivre. Si l'effluent est reducteur il est preoxyde a l'ozone ou au permanganate de potassium. Mis au point a Marcoule en 1963, il est depuis 1965 exploite industriellement, son prix de revient est du meme ordre de grandeur que celui des traitements habituels et les resultats ont donne satisfaction. (auteur)

  15. Critical sizes and flux distributions in the shut down pile; Tailles critiques et cartes de flux a froid

    Energy Technology Data Exchange (ETDEWEB)

    Banchereau, A; Berthier, P; Genthon, J P; Gourdon, C; Lattes, R; Martelly, J; Mazancourt, R de; Portes, L; Sagot, M; Schmitt, A P; Tanguy, P; Teste du Bailler, A; Veyssiere, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    An important part of the experiments carried out on the reactor G1 during a period of shut-down has consisted in determinations of critical sizes, and measurements of flux distribution by irradiations of detectors. This report deals with the following points: 1- Critical sizes of the flat pile, the long pile and the uranium-thorium pile. 2- Flux charts of the same piles, and study of an exponential experiment. 3- Determination of the slit effect. 4- Calculation of the anisotropy of the lattice. 5- Description of the experimental apparatus of the irradiation measurements. (author) [French] Une part importante des experiences a froid effectuees sur le reacteur G1 a consiste en des determinations de tailles critiques et des mesures de distributions de flux par irradiations de detecteurs. Le present rapport traite les points suivants: 1- Tailles critiques de la pile plate, de la pile longue, de la pile a uranium-thorium. 2 - Cartes de flux des memes piles et etude d'une experience exponentielle. 3 - Determination de l'effet de fente. 4 - Calcul de l'anisotropie du reseau. 5 - Description de l'appareillage experimental des mesures d'irradiations. (auteur)

  16. Critical sizes and flux distributions in the shut down pile; Tailles critiques et cartes de flux a froid

    Energy Technology Data Exchange (ETDEWEB)

    Banchereau, A.; Berthier, P.; Genthon, J.P.; Gourdon, C.; Lattes, R.; Martelly, J.; Mazancourt, R. de; Portes, L.; Sagot, M.; Schmitt, A.P.; Tanguy, P.; Teste du Bailler, A.; Veyssiere, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    An important part of the experiments carried out on the reactor G1 during a period of shut-down has consisted in determinations of critical sizes, and measurements of flux distribution by irradiations of detectors. This report deals with the following points: 1- Critical sizes of the flat pile, the long pile and the uranium-thorium pile. 2- Flux charts of the same piles, and study of an exponential experiment. 3- Determination of the slit effect. 4- Calculation of the anisotropy of the lattice. 5- Description of the experimental apparatus of the irradiation measurements. (author) [French] Une part importante des experiences a froid effectuees sur le reacteur G1 a consiste en des determinations de tailles critiques et des mesures de distributions de flux par irradiations de detecteurs. Le present rapport traite les points suivants: 1- Tailles critiques de la pile plate, de la pile longue, de la pile a uranium-thorium. 2 - Cartes de flux des memes piles et etude d'une experience exponentielle. 3 - Determination de l'effet de fente. 4 - Calcul de l'anisotropie du reseau. 5 - Description de l'appareillage experimental des mesures d'irradiations. (auteur)

  17. Physical study of the 'snow flake' version of the reactor EL-3 (1963); Etude physique de la version ''cristal de neige'' de la pile EL-3 (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Abillon, E; Genthon, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    A systematic study has been made of the different thermodynamic and neutronic aspects of various versions of the 'snow flake' likely to fulfil the aims which were set out (improvement of the reactivity, of the experimental volume, improvement in the working conditions of EL-3). After this systematic study, a choice was made in principle of one version amongst the several available (solutions using 8 or 10 pencils-various methods of heat transfer: corrugation, cartridges which may or may not be filled with helium... etc., variable enrichments... ). The choice is that of a version which can already at the present be considered as feasible, which represents already a notable improvement of the pile and which does not imply the existence of a major problem as far as the possible change-over later to an improved version is concerned. This choice defines a fuel element and a configuration for the core. A detailed recapitulation has been made of all the research being carried out for the possible solutions in this particular case. (authors) [French] On a etudie systematiquement les differents aspects thermodynamiques et neutroniques de diverses versions 'cristal de neige' susceptibles de remplir les buts fixes (amelioration en reactivite, en volume experimental, amelioration des problemes d'exploitation de EL-3). Apres cette etude systematique, on a procede au choix de principe d'une version parmi les differentes solutions possibles (solutions a 8 ou 10 crayons - possibilite de transfert de chaleur divers: corrugations, cartouches remplies He ou non.... etc., enrichissements variables... ). Ce choix est celui d'une version qu'on peut juger viable des aujourd'hui, qui represente deja une amelioration importante de la pile et qui n'implique pas de probleme majeur quant au passage ulterieur et eventuel a une version plus amelioree. Ce choix definit un element combustible, et une configuration de coeur. On a recapitule et detaille sur ce cas particulier de pile les etudes

  18. Pile Driving Analysis for Pile Design and Quality Assurance

    Science.gov (United States)

    2017-08-01

    Driven piles are commonly used in foundation engineering. The most accurate measurement of pile capacity is achieved from measurements made during static load tests. Static load tests, however, may be too expensive for certain projects. In these case...

  19. The health physics of installations for decladding irradiated fuels or for handling radio-elements at Marcoule; La radioprotection des installations de degainage des combustibles irradies et des radio-elements a Marcoule

    Energy Technology Data Exchange (ETDEWEB)

    Chassany, J; Guillermin, P; Mallet, P [Commissariat a l' Energie Atomique, Centre de Production de Plutonium de Marcoule, 30 - Chusclan (France)

    1966-07-01

    Radiation protection practices for handling reactor fuel elements are described. Elements of considerable specific radioactivity are handled under water. A study was made of water filtration and of ventilation in the building. The installations are divided up into zones depending on the radioactive risks, and the radiation level atmospheric contamination are the object of a systematic control at various points. A description is given of all aspects of health physics which have been encountered during six years: storage, transfer of radioactive material; decladding, rolling, waste disposal, specialized operations, installations in operation and at rest, and transport. In spite of the gradual increase in the activity of these installations, the total doses received by the personnel have hardly altered and the number of cases of physical contamination has diminished. (authors) [French] Dans ces installations, se manipulent sous l'eau des elements a radioactivite specifique considerable. La filtration de l'eau, la ventilation ont ete particulierement etudiees. L'ensemble a ete divise en lieux classes en fonction des risques radioactifs et des appareils controlent en permanence l'irradiation et la contamination atmospherique en certains points. Tous les aspects de la radioprotection resultant de six annees d'experience relatifs: au stockage, au deconteneurage, au degainage, au laminage, a l'evacuation des residus, aux travaux particuliers, installations en marche et a l'arret, et aux transports sont successivement decrits. Malgre l'accroissement progressif de l'activite de cet ensemble, les doses integrees par le personnel n'ont pratiquement pas augmente et le nombre des cas de contamination corporelle a diminue. (auteurs)

  20. Study and modelling of the in-pile densification of the UO{sub 2} and MO{sub x} nuclear oxides; Etude et modelisation de la densification en pile des oxydes nucleaires UO{sub 2} et MO{sub x}

    Energy Technology Data Exchange (ETDEWEB)

    Boulore, A

    2001-03-01

    Amongst the many phenomena which take place in the course of the irradiation of UO{sub 2} or (U, Pu)O{sub 2} nuclear fuels, one of them involves the elimination of a fraction of the as-fabricated porosity. In-pile densification or sintering can reach 2.5%, i.e. approximately half the initial volume of pores is likely to disappear. Our literature survey indicates that the amplitude and kinetics of the phenomenon are both heavily dependent on the initial fuel microstructure. Micro-structural characterisation techniques of oxide fuels have therefore been developed in conjunction with quantitative image analysis methods. The ensuing methodology enables a quantitative comparison of micro-structural features in different fuels and has been applied to ascertaining the influence of the local fission rate and temperature on in-pile densification. It is thus revealed that in-pile operation eliminates a significant fraction of pores smaller than 3 microns in diameter. The experimental data generated has been used to set up a semi-empirical and a mechanistic model. The former is based on experimental results and is not essentially predictive. The inability of this model to predict the in-pile densification of oxide fuels is illustrated by the fact that the maximum fraction of pores that disappears is proportional to an empirical function of fission rate, and temperature. The proportionality factor appears to be difficult to correlate quantitatively to any given micro-structural feature. The model has however been applied to the interpretation of an in-pile densification experiment carried out in the Halden reactor (Norway). The latter model is mechanistic, i.e. it is based on the solution to a set of equations that describe the coupled temperature and radiation induced phenomena which occur in-pile. These can broadly be broken down into three categories: the fission fragment-pore interaction, the creation of point defects as the fission fragments slow down, and the diffusion

  1. Uranium absorption study pile

    International Nuclear Information System (INIS)

    Raievski, V.; Sautiez, B.

    1959-01-01

    The report describes a pile designed to measure the absorption of fuel slugs. The pile is of graphite and comprises a central section composed of uranium rods in a regular lattice. RaBe sources and BF 3 counters are situated on either side of the center. A given uranium charge is compared with a specimen charge of about 560 kg, and the difference in absorption between the two noted. The sensitivity of the equipment will detect absorption variations of about a few ppm boron (10 -6 boron per gr. of uranium) or better. (author) [fr

  2. Modelling the pile load test

    Directory of Open Access Journals (Sweden)

    Prekop Ľubomír

    2017-01-01

    Full Text Available This paper deals with the modelling of the load test of horizontal resistance of reinforced concrete piles. The pile belongs to group of piles with reinforced concrete heads. The head is pressed with steel arches of a bridge on motorway D1 Jablonov - Studenec. Pile model was created in ANSYS with several models of foundation having properties found out from geotechnical survey. Finally some crucial results obtained from computer models are presented and compared with these obtained from experiment.

  3. Laterally Loaded Piles in Clay

    DEFF Research Database (Denmark)

    Christensen, Helle; Niewald, Gitte

    1992-01-01

    The ultimate lateral resistance of a pile element moved horizontally can be analyzed by the theory of plasticity. At a certain depth the movements around the pile are purely horizontal and upper bound solutions can be estimated theoretically under undrained circumstances. Model tests...... in the laboratory show ultimate resistances close to the estimated limits and p - y curves close to curves based on test results from full-scale piles. Rough and smooth piles with circular and square cross sections are investigated....

  4. Modelling the pile load test

    OpenAIRE

    Prekop Ľubomír

    2017-01-01

    This paper deals with the modelling of the load test of horizontal resistance of reinforced concrete piles. The pile belongs to group of piles with reinforced concrete heads. The head is pressed with steel arches of a bridge on motorway D1 Jablonov - Studenec. Pile model was created in ANSYS with several models of foundation having properties found out from geotechnical survey. Finally some crucial results obtained from computer models are presented and compared with these obtained from exper...

  5. Characterizing hand-piled fuels

    Science.gov (United States)

    Clinton S. Wright; Paige C. Eagle; Cameron S. Balog

    2010-01-01

    Land managers throughout the West pile and burn surface fuels to mitigate fire hazard in dry forests. Whereas piling was historically conducted with heavy machinery following commercial harvesting operations, land managers are increasingly prescribing the use of hand piling and burning to treat surface fuels created by thinning and brush cutting. An estimate of the...

  6. Discovery: Pile Patterns

    Science.gov (United States)

    de Mestre, Neville

    2017-01-01

    Earlier "Discovery" articles (de Mestre, 1999, 2003, 2006, 2010, 2011) considered patterns from many mathematical situations. This article presents a group of patterns used in 19th century mathematical textbooks. In the days of earlier warfare, cannon balls were stacked in various arrangements depending on the shape of the pile base…

  7. Test Exponential Pile

    Science.gov (United States)

    Fermi, Enrico

    The Patent contains an extremely detailed description of an atomic pile employing natural uranium as fissile material and graphite as moderator. It starts with the discussion of the theory of the intervening phenomena, in particular the evaluation of the reproduction or multiplication factor, K, that is the ratio of the number of fast neutrons produced in one generation by the fissions to the original number of fast neutrons, in a system of infinite size. The possibility of having a self-maintaining chain reaction in a system of finite size depends both on the facts that K is greater than unity and the overall size of the system is sufficiently large to minimize the percentage of neutrons escaping from the system. After the description of a possible realization of such a pile (with many detailed drawings), the various kinds of neutron losses in a pile are depicted. Particularly relevant is the reported "invention" of the exponential experiment: since theoretical calculations can determine whether or not a chain reaction will occur in a give system, but can be invalidated by uncertainties in the parameters of the problem, an experimental test of the pile is proposed, aimed at ascertaining if the pile under construction would be divergent (i.e. with a neutron multiplication factor K greater than 1) by making measurements on a smaller pile. The idea is to measure, by a detector containing an indium foil, the exponential decrease of the neutron density along the length of a column of uranium-graphite lattice, where a neutron source is placed near its base. Such an exponential decrease is greater or less than that expected due to leakage, according to whether the K factor is less or greater than 1, so that this experiment is able to test the criticality of the pile, its accuracy increasing with the size of the column. In order to perform this measure a mathematical description of the effect of neutron production, diffusion, and absorption on the neutron density in the

  8. The direct conversion of heat into electricity in reactors; Conversion directe de la chaleur en electricite dans les piles

    Energy Technology Data Exchange (ETDEWEB)

    Devin, B; Bliaux, J; Lesueur, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    pile atomique a ete etudiee dans la triple perspective de son utilisation soit comme source d'energie de servitude dans un engin spatial, soit en tete d'un systeme conventionnel de conversion dans les installations de puissance, soit enfin associee a la conversion thermoelectrique dans des installations de tres faible puissance. Les etudes en laboratoire ont porte principalement sur les travaux d'extraction electronique des metaux et composes et leur evolution a haute temperature. Des convertisseurs fournissant jusqu'a 50 amperes sous 0,4 volt avec un rendement voisin de 10 p. 100 ont ete realises en laboratoire; les emetteurs chauffes par bombardement electronique etaient constitues de tungstene recouvert d'un depot de carbure d'uranium ou de molybdene recouvert de cesium. Les principaux aspects du couplage entre le convertisseur et la pile atomique ont ete examines du point de vue electronique: influence de la desadaptation de la charge sur la temperature de l'emetteur et influence du flux thermique unitaire sur la temperature de l'emetteur et la stabilite du convertisseur. Des convertisseurs utilisant le carbure d'uranium comme emetteur electronique ont ete experimentes en pile. Des essais ont ete effectues en regime transitoire en vue de determiner les parametres dynamiques. Les reseaux d'adaptation a la charge ont pu etre construits et on en a deduit les performances globales de plusieurs cellules couplees de maniere a former un barreau de reacteur. Ces donnees sont indispensables pour la conception d'un systeme de controle d'une pile a conversion thermoionique, On a examine theoriquement les problemes de fiabilite des convertisseurs thermoioniques associes en serie dans un meme barreau de combustible. Enfin, on a trace les isothermes d'absorption a la temperature ambiante du krypton et du xenon sur un charbon active en vue d'etudier le degagement des produits de fission dans un convertisseur. (auteurs)

  9. Valorization of used tyres as fuel substitute in cement industry; Valorisation des pneus usages comme combustible de substitution en cimenterie

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1999-03-01

    According to the French syndicate of cement industry, more than 350000 t of worn tyres are produced each year in France, among which only 143000 t are reused in retreading, exported as used tyres or valorized in cement industry. The rest is generally tipped or burnt in the open-air. In cement kilns, the organic matters of tyres are completely burnt while the metal belts supply the necessary amount of iron to the cement composition. The combustion of tyres produces no black smoke, no smell and no ash and has no significant influence on the effluents of cement factories: gases are directly filtered in the kiln by the important mass of raw materials which acts as quicklime. In 1997, 31500 t of used tyres were burnt in the seven French cement factories over 34 that use this kind of fuel and represents 1.5% of the total energy needs. This substitution ratio could easily reach 10 to 15% without leading to any additional environmental or technical problem. A project of collection and valorization of used tyres has been developed by the French ministry of environment and aims at completely eliminating tyres tipping since July 1, 2002. In order to illustrate the French policy of tyres valorization, two examples of actions are presented in this paper: the first one is carried out by the Michelin manufacturer in order to facilitate the recycling of civil engineering tyres, and the second is carried out by Ciments d`Origny company at the Rochefort factory where tyres are used as fuel substitutes. (J.S.)

  10. Reheating experiment in the 35-ton pile; Experience de rechauffage sur la pile de 35 tonnes

    Energy Technology Data Exchange (ETDEWEB)

    Cherot, J; Girard, Y [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    When the 35-ton pile was started up it was necessary for us, in order to study certain effects (xenon for example), to know the anti reactivity value of the rods as a function of their dimensions. We have made use of the possibility, in the reheating experiment, of raising the temperature of the graphite-uranium block by simple heating, in order to determine the anti reactivity curves of the rods, and from that the overall temperature coefficient. For the latter we have considered two solutions: first, one in which the average temperature of the pile is defined as our arithmetical mean of the different values given by the 28 thermocouples distributed throughout the pile; a second in which the temperature in likened to a poisoning and is balanced by the square of the flux. The way in which the measurements have been made is indicated, and the different instruments used are described. The method of reheating does not permit the separation of the temperature coefficients of uranium and of graphite. The precision obtained is only moderate, and suffers from the changes of various parameters necessary to other manipulations carried out simultaneously (life time modulators for example), and finally it is a function of the comparatively restricted time allowed. It is evident of course that more careful stabilisation at the different plateaux chosen would have necessitated long periods of reheating. (author) [French] Nous avions besoin lors de la montee en puissance de la pile de 35 tonnes, pour l'elude de divers effets (xenon par ex.) de la valeur de l'antireactivite des barres en fonction de leurs cotes. Nous avons profite dans l'experience rechauffage de la possibilite de monter en temperature, non nucleairement, le bloc graphite uranium, pour determiner les courbes d'antireactivite des barres et de la le coefficient global de temperature. Nous avons considere pour ce dernier deux solutions. Une premiere dans laquelle la temperature moyenne de la pile est definie comme

  11. Heavy water reactors physics; Physique des reacteurs a eau lourde

    Energy Technology Data Exchange (ETDEWEB)

    Girard, Y; Lourme, P; Naudet, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    An important research programme on heavy water reactor physics has been carried out in France for quite a few years. The decision to build the EL 4 prototype and so to choose the heavy water gas cooled type has renewed the interest in this programme and at the same time given to it a more specific orientation A summary of the results gained in this field is presented in this paper. In the first part are described the experimental investigations, most of them were carried out in the criticality facility AQUILON II. The experiments are grouped in four parts - Systematic studies of lattices Buckling measurements. - Specific studies of gas-cooled lattices. - Fine structure, spectral indices measurements etc... - Measurements on lattices or samples containing Uranium of various enrichment or Plutonium. The second part is devoted to a summary of the theoretical studies. The whole results have allowed an improvement of the calculation methods, have led to a better understanding of the neutron balance in lattices, and have permitted the establishment of a set of formula to predict not only the clean fuel conditions but also the evolution of the nuclear properties with irradiation. Some specific studies on power reactor are quoted. (authors) [French] Un important programme d'etudes sur la physique des reacteurs a eau lourde est mene en France depuis assez longtemps. La decision de construire le prototype EL 4 et de s'engager ainsi dans la filiere des reacteurs a eau lourde refroidis par gaz a redonne un nouvel interet a ce programme et l'a en meme temps oriente dans une direction plus particuliere. La presente communication, rassemble les resultats des etudes faites dans ce domaine depuis la derniere conference de Geneve. Dans la premiere partie on decrit les etudes experimentales dont la plupart ont ete effectuees dans la pile d'experiences critiques Aquilon II. Les experiences sont groupees en quatre ensembles: etude systematique de reseaux (mesures de laplaciens) etudes

  12. Ultrasonic Water-Gap Measurements in MTR Fuel Elements; Mesure par Ultrasons des Espaces Intercalaires dans les Elements Combustibles des Reacteurs d'Essai de Materiaux; Izmereniya vodyanogo zazora v teplovydelyayushchikh ehlementakh dlya materialovedcheskogo reaktora s pomoshch'yu ul'trazvuka; Medicion Ultrasonica de la Capa de Agua en Elementos Combustibles para Reactores de Ensayo de Materiales

    Energy Technology Data Exchange (ETDEWEB)

    Deknock, R. [Metallurgy Department, S.C.K./C.E.N., Mol (Belgium)

    1965-10-15

    generalement eleves, il est indispensable de prevoir un transfert de chaleur uniforme et un refroidissement regulier empechant toute formation massive de vapeur. En outre, pour determiner le gonflement et le comportement general du combustible dans le reacteur, il faudra mesurer les espaces intercalaires dans les elements combustibles au cours de controles apres irradiation. A cette fin, on a mis au point une sonde fondee sur le principe des ultrasons, qui permet de mesurer les espaces intercalaires de 3 mm sur 1 m de long dans les elements combustibles du reacteur BR-2. Lorsqu'on procede a des experiences apres irradiation, la sonde doit pouvoir fonctionner dans un element combustible immerge dans un reservoir d'eau a une profondeur de 6 m au minimum. La sonde peut resister a une immersion prolongee dans l'eau et n'est pas endommagee par une irradiation gamma a des doses normales. Bien que le systeme soit fonde sur la methode classique de la reflexion des impulsions, il permet de separer les impulsions emises des impulsions reflechies au moyen d'un cristal ferroelectrique de 10 MHz a pouvoir eleve de dispersion de l'energie. Les resultats des mesures peuvent etre lus directement sur un oscilloscope: le temps est indique sur l'axe horizontal et la vitesse d'exploration est reglee de maniere a se trouver en relation directe avec la vitesse de propagation de l'onde, c'est-a-dire avec la distance intercalaire. Ce mode de lecture est satisfaisant lorsqu'on procede a un nombre limite de mesures, mais il est evidemment preferable d'enregistrer les resultats sur un graphique. Dans ce cas, les impulsions incidentes et les impulsions reflechies sont transmises a un convertisseur temps-tension au moyen d'un circuit logique transistorise. Cet appareil permet un ajustement continu du zero de sortie pour toute distance intercalaire choisie arbitrairement entre 2 et 4 mm, grace a quoi on peut obtenir un enregistrement autour d'un axe zero. En outre, toute variation de 100 {mu}m de la

  13. Mono pile foundation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lyngesen, S.; Brendstrup, C.

    1997-02-01

    The use of mono piles as foundations for maritime structures has been developed during the last decades. The installation requirements within the offshore sector have resulted in equipment enabling driving of piles up to 3-4 m to large penetration depths. The availability of this equipment has made the use of large mono piles feasible as foundations for structures like wind turbines. The mono pile foundations consists of three parts; the bare pile, a conical transition and a boat landing. All parts are prefitted at the yard in order to minimise the installation work that has to be carried out offshore. The study of a mono pile foundations for a 1.5 MW wind turbine has been conducted for two locations, Horns Rev and Roedsand. Three different water depths: 5, 8 and 11 m have been investigated in the study. The on-site welding between pile and conical transition is performed by an automatic welding machine. Final testing and eventually repair of the weld are conducted at least 16 hours after welding. This is followed by final installation of J-tube, tie-in to subsea cables and installation of the impressed current system for corrosive protection of the mono pile. The total cost for procurement and installation of the mono pile using the welded connection is estimated. The price does not include procurement and installation of access platform and boat landing. These costs are estimated to 250.000 DKK. Depending on water depth the cost of the pile ranges from 2,2 to 2,7 million DKK. Procurement and fabrication of the pile are approx. 75% of the total costs. The remaining 25% are due to installation. The total costs are very sensitive to the unit price of pile steel. During the project it became obvious that ice load has a very large influence on the dimensions of the mono pile. (EG)

  14. The influence of xenon poisoning in high-flux reactors on the choice of control rod speeds (1961); Influence de l'empoisonnement xenon dans les piles a haut flux sur le choix de la vitesse des barres de controle (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Furet, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    - The general laws are restated concerning the changes in xenon and iodine concentrations in thermal neutron reactors, assuming an uniform neutron flux distribution in the core. It is shown how the evolution in the xenon poisoning influences the selection of the control rod speed, at start-up. Certain simple methods of calculation are developed making it possible to resolve the problem of the choice of this speed in the case where the xenon poisoning is taken into account. (author) [French] - On rappelle les lois generales relatives aux evolutions de concentration xenon et iode dans les piles atomiques a neutrons thermiques lorsqu'on suppose une repartition uniforme du flux de neutrons dans le coeur. On montre comment l'evolution de l'empoisonnement xenon influe sur le choix de la vitesse des barres de controle en periode de demarrage. On developpe certaines methodes de calculs simples permettant de resoudre le probleme du choix de la vitesse des barres de controle, dans le cas ou l'on tient compte de l'empoisonnement xenon. (auteur)

  15. Engine 3E. NO{sub x} reduction by means of homogenisation of mixtures inside combustion chambers. Final report; Engine 3E. NO{sub x}-Reduktion durch Homogenisierung des Gemisches in Brennkammern. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Zarzalis, N.; Homann; Schubert

    1999-11-05

    This is the final report of the Technology Project 'NO{sub x} reduction by means of homogenisation of mixtures inside combustion chambers', which is part of the Engine 3E 2010 programme of the BMBF, which was to promote research in aircraft engineering. In this project, technologies were developed to achieve a 60% reduction of NO{sub x} emissions as compared to ICAO '95 in an annular combustion chamber in realistic operating conditions where the emissions of substances oher than NO{sub x} were to be of the same level as the emissions of modern jet drives. Further, the design of the new combustion chamber was to be conventional in order to retain the possibility of converting existing propulsion systems to the new technology. [German] Diese Notiz enthaelt den Abschlussbericht des Technologievorhabens 'NO{sub x}-Reduktion durch Homogenisierung des Gemisches in Brennkammern'. Das Vorhaben ist Teil des Luftfahrtfoerderprogramms Engine 3E 2010 der Bundesregierung und wird vom Bundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie (BMBF) unter dem Foerderkennzeichen 20T9540 gefoerdert. Das Programm wurde am 01. Juli 1995 begonnen und endete am 30. Juni 1999. Entsprechend dem Foerderantrag wurden in dem Vorhaben Einzeltechnologien erarbeitet, die erforderlich sind, um eine 60% Reduktion der NO{sub x}-Emissionen gegenueber ICAO '95 in einer Ringbrennkammer unter realistischen Betriebsbedingungen zu demonstrieren, wobei die restlichen Emissionen das Emissionsniveau moderner Triebwerke nicht ueberschreiten sollten. Darueber hinaus sollte das aeussere Design der zu entwickelnden Brennkammer sind von konventionellen Brennkammern nicht unterscheiden, um die Moeglichkeit der Umruestung von alten Triebwerken mit der Brennkammern der neuen Technologie offen zu halten. (orig.)

  16. The influence of the form of the cells on the buckling and fine structure of the thermal flux in a heterogeneous pile; Influence de la forme des cellules sur le laplacien et structure fine du flux thermique dans une pile heterogene

    Energy Technology Data Exchange (ETDEWEB)

    Bailly du Bois, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    The elementary diffusion equation and the age equation have been solved for lattices assumed, to be infinite and periodic. In this way the influence of the form of the cells on thermal captures and resonance captures is determined. The solutions obtained are expressed by means of tabulated functions which can be used in the analysis of the f factor measurements. The case of mixed lattices in which different types of rods are regularly arranged is also foreseen. (author) [French] L'equation elementaire de la diffusion et l'equation de l'age ont ete resolues pour des reseaux supposes infinis et periodiques. On determine ainsi quelle est l'influence de la forme des cellules sur les captures thermiques et les captures de resonances. Les solutions obtenues s'expriment au moyen de fonctions tabulees qui peuvent etre utilisees dans le depouillement des mesures du facteur f. Le cas des reseaux mixtes dans lequels des barreaux de types differents sont disposes regulierement est egalement envisage. (auteur)

  17. On Board Hydrogen Generation for Fuel Cell Powered Electric Cars. a Review of Various Available Techniques Production d'hydrogène embarquée pour véhicules électriques à piles. Aperçu de différentes techniques envisageables

    Directory of Open Access Journals (Sweden)

    Prigent M.

    2006-12-01

    Full Text Available Various methods allowing onboard hydrogen generation for fuel cell powered electric cars are reviewed. The following primary fuels are considered : ammonia, methanol, ethanol, and hydrocarbons. The catalytic cracking of ammonia allows generation of a CO2-free mixture containing 75% hydrogen, which is consequently suitable without subsequent purification for the supply of alkaline fuel cells. The problems posed by this primary fuel are toxicity in the event of leaks and the risk of generating nitrogen oxides in the catalytic combustion of the cell effluent. Methanol, ethanol, and the liquid or gas hydrocarbons also allow the generation of hydrogen-rich mixes, either by catalytic steam reforming or by partial oxidation. The gas obtained in this way contains a large amount of CO2 and CO, however, and its use requires a prior purification treatment. Except for use in high-temperature cells, the CO concentration must be reduced to a very low level (a few ppm. The CO2, however, may be kept for the supply of acid electrolyte cells, although it must be eliminated for use with alkaline cells. All these methods are commonly used in industry, but the design of small fully automated facilities allowing fast frequent starting and stopping as well as continuous load variations without loss of performance or pollutant emissions is still a very delicate and uncertain matter. Différents procédés permettant la production embarquée d'hydrogène pour véhicules électriques à piles à combustible sont passés en revue. Les combustibles primaires suivants sont considérés : ammoniac, méthanol, éthanol et hydrocarbures. Le craquage catalytique de l'ammoniac permet l'obtention d'un mélange à 75 % d'hydrogène, exempt de CO2 et convenant donc sans purification ultérieure pour l'alimentation des piles alcalines. Avec ce combustible primaire, les problèmes sont la toxicité en cas de fuite et le risque de production d'oxydes d'azote lors de la combustion

  18. Study of physico-chemical release of uranium and plutonium oxides during the combustion of polycarbonate and of ruthenium during the combustion of solvents used in the reprocessing of nuclear fuel; Etude de la mise en suspension physico-chimique des oxydes de plutonium et d'uranium lors de la combustion de polycarbonate et de ruthenium lors de la combustion des solvants de retraitement du combustible irradie

    Energy Technology Data Exchange (ETDEWEB)

    Bouilloux, L

    1998-07-01

    The level of consequences concerning a fire in a nuclear facility is in part estimated by the quantities and the physico-chemical forms of radioactive compounds that may be emitted out of the facility. It is therefore necessary to study the contaminant release from the fire. Because of the multiplicity of the scenarios, two research subjects were retained. The first one concerns the study of the uranium or plutonium oxides chemical release during the combustion of the polycarbonate glove box sides. The second one is about the physico chemical characterisation of the ruthenium release during the combustion of an organic solvent mixture (tributyl phosphate-dodecane) used for the nuclear fuel reprocessing. Concerning the two research subjects, the chemical release, i.e. means the generation of contaminant compounds gaseous in the fire, was modelled using thermodynamical simulations. Experiments were done in order to determine the ruthenium release factor during solvent combustion. A cone calorimeter was used for small scale experiments. These results were then validated by large scale tests under conditions close to the industrial process. Thermodynamical simulations, for the two scenarios studied. Furthermore, the experiments on solvent combustion allowed the determination of a suitable ruthenium release factor. Finally, the mechanism responsible of the ruthenium release has been found. (author)

  19. Aerial sampling of emissions from biomass pile burns in ...

    Science.gov (United States)

    Emissions from burning piles of post-harvest timber slash in Grande Ronde, Oregon were sampled using an instrument platform lofted into the plume using a tether-controlled aerostat or balloon. Emissions of carbon monoxide, carbon dioxide, methane, particulate matter (PM2.5 µm), black carbon, ultraviolet absorbing PM, elemental/organic carbon, semi-volatile organics (polycyclic aromatic hydrocarbons and polychlorinated dibenzodioxins/dibenzofurans), filter-based metals, and volatile organics were sampled for determination of emission factors. The effect on emissions from covering or not covering piles with polyethylene sheets to prevent fuel wetting was determined. Results showed that the uncovered (“wet”) piles burned with lower combustion efficiency and higher emissions of volatile organic compounds. Results for other pollutants will also be discussed. This work determined the emissions from open burning of forest slash wood, with and without plastic sheeting. The foresters advocate the use of plastic to keep the slash wood dry and aid in the controlled combustion of the slash to reduce fuel loading. Concerns about the emissions from the burning plastic prompted this work which conducted an extensive characterization of dry, wet, and dry with plastic slash pile emissions.

  20. Efficiency of the Shut-Down and Safety Equipment and the Kinetic Characteristics of the G2 and G3 Reactors; Efficacite des dispositifs de secours et de securite et caracteristiques cinetiques des piles G2 et G3; Ehffektivnost' sistem avarijnoj zashchity reaktorov G.2 i G.3 i kineticheskie kharakteristiki ehtikh sistem; Caracteristicas cineticas y eficacia de los dispositivos de auxilio y de seguridad de los reactores G2 y G3

    Energy Technology Data Exchange (ETDEWEB)

    Henri, C.; Plisson, J.; Teste duBailler, A. [Centre d' Etudes Nucleaires de Saclay (France)

    1963-10-15

    The experience gained in several years of operating the G2 and G3 reactors confirms that natural uranium-graphite-gas reactors are extremely safe. The built-in shut-down and safety mechanisms which minimize operational incidents such as lack of power from the mains, blower failure, lack of water etc., together with accidents such as cladding bursts, local overheating, loss of coolant etc. are described and their operation explained by means of diagrams. The main points examined are as follows: (a) power distribution and controlability during accident conditions; (b) distribution of emergency water; and (c) the safety chain. The performance of the installations and the successive improvements incorporated in them are mentioned. The built-in safety characteristics of the reactors are shown by means of an experimental study of their behaviour in transient operation. These studies make it possible to check the validity of the calculation model. The machine calculation programmes can subsequently be used to study the consequences of possible accidents. Special attention is given to the depressurization accident, taking into account the performance of the safety device installed. (author) [French] L'experience acquise'au cours de plusieurs annees d'exploitation des piles G2 et G3 permet de confirmer le haut degre de securite du fonctionnement des piles de la filiere uranium naturel-graphitegaz. Les installations fixes de secours et de securite permettant de pallier, d'une part aux incidents d'exploitation tels que manque d'alimentation du reseau de distribution, arret de soufflage, manque d'alimentation en eau, etc., d'autre part, a des accidents tels que rupture de gaine, echauffements locaux, perte de fluide caloporteur, etc., sont decrites et leur fonctionnement explicite au moyen de schemas de principe. On examine principalement (a) la distribution ''puissance'' et ''controle'' des installations secourues, (b) la distribution d'eau secourue, et (c) la chaine de

  1. Critical experiments in AQUILON with fuels slightly enriched in uranium 235 or in plutonium; Experiences critiques dans aquilon portant sur des combustibles legerement enrichis en uranium 235 et en plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Chabrillac, M; Ledanois, G; Lourme, P; Naudet, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    Reactivity comparisons have been, made in Aquilon II between geometrically identical lattices differing only by the composition of the fuel. The fuel elements consist in metallic uranium single rods with either slight differences of the isotopic composition (0.69 - 0.71 - 0.83 - 0.86 per cent of uranium 235) or slight additions of plutonium (0.043 per cent). Five lattices pitches have bean used, in order to produce a large variation of spectrum. Two additional sets of plutonium fuels are prepared to be used in the same conditions. The double comparisons: natural enriched 235 versus natural-enriched plutonium are made in such a way that a very precise interpretation is permitted. The results are perfectly consistent which seems to prove that the calculation methods are convenient. Further it can been inferred that the usual data, namely for the ratio of the {eta} of {sup 235}U and {sup 239}Pu seem reliable. (authors) [French] On a compare neutroniquement dans Aquilon II des reseaux geometriquement identiques mais comportant de petites differences de composition du combustible. EL s'agit de barres d'uranium metallique, les unes avec des teneurs differentes en isotopes 235 (0,69 - 0,71 - 0,83 - 0,86 pour cent) les autres comportant une legere addition de plutonium (0,043 pour cent). Les comparaisons ont ete faites a cinq pas differents, de maniere a mettre en jeu une assez large variation de spectre. Deux autres jeux de combustible au plutonium seront utilises ulterieurement dans les memes conditions. Les resultats des mesures se presentent sous forme de doubles comparaisons: naturel-enrichi 235/naturel-enrichi plutonium. On s'est place dans des conditions qui permettent des interpretations tres precises. Les resultats sont remarquablement coherents, ce qui semble montrer que les methodes de calcul sont bien adaptees, Ils tendent d'autre part a prouver que les valeurs numeriques admises dans la litterature, notamment pour le rapport des {eta} de l'U 235 et de Pu 239

  2. Use of geothermal piles combined with pile foundations

    Directory of Open Access Journals (Sweden)

    Ivan Kuzytskyi

    2016-07-01

    Full Text Available The possibility of use of geothermal piles in conditions of cold climate is considered. Full-scale experiment is conducted for using this technology in Kiev. Obtained results testify about a possibility for using the system in conditions of Ukraine, but this technology requires more detailed study and simulation of multiannual cycle of use of geothermal piles 

  3. Fabrication of the 4. set of fuel elements for the experimental pile EL2; Fabrication du 4. jeu de barreaux de la pile d'essai EL2

    Energy Technology Data Exchange (ETDEWEB)

    Ringot, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The reactor EL2 is the second atomic reactor built in France. It is a laboratory reactor using heavy water and natural uranium. Its cooling circuit operates with compressed CO{sub 2} gas at 8 kg/cm{sup 2} pressure. The subject of this lecture is the manufacturing of the fourth set of rods. The principle of uranium-can connection is exposed: that is the principle of a pre-pressed bound can. The EL2 reactor has been a prototype with respect to this aspect of the question, and a prototype which has been quite satisfactory. The main steps of the fabrication are exposed: the {gamma} phase extension of uranium, the machining, the three canning (die canning, hydraulic canning, compressed air treatment), the automatic argon arc welding of cups and the different manufacturing controls. (author) [French] Le reacteur EL2 est le deuxieme reacteur construit en France. C'est un reacteur de recherches qui utilise de l'eau lourde et de l'uranium naturel. Il est refroidi par du gaz carbonique sous 8 kg/cm{sup 2} de pression. On etudie dans cet expose la fabrication du quatrieme jeu d'elements combustibles. Le principe de la liaison uranium-gaine est expose: c'est celui d'une gaine precontrainte. La pile EL2 a constitue un prototype a ce point de vue, prototype qui a donne entiere satisfaction. Les principales etapes de la fabrication sont ensuite expliquees: le filage {gamma} de l'uranium, l'usinage des barreaux, les trois operations de gainages (gainage par filiere, gainage hydraulique, gainage a chaud), la soudure automatique des bouchons a l'argon-arc et les differents controles de fabrication. (auteur)

  4. Statistical fluctuations of the number of neutrons in a pile; Fluctuations statistiques du nombre de neutrons dans une pile

    Energy Technology Data Exchange (ETDEWEB)

    Raievski, V [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The theory of the statistical fluctuations in a pile is extended to the space dependent case, and gives the fluctuations of the number of neutrons in a cell of the core or reflector of the pile. This number changes through elementary processes occurring at random, which are, capture, source, fission and scattering. Of all these processes, fission is the only one which changes more than one neutron at a time and so is responsible of the deviation of the fluctuations from a Poisson law. The importance of this deviation depends on the dimensions of the cell compared to the slowing down length. When the dimensions are small, the fluctuations close to a Poisson law. (author) [French] La theorie des fluctuations statistiques est etendue au cas local et donne les fluctuations du nombre de neutrons dans une cellule situee dans le coeur ou le reflecteur de la pile. Ce nombre evolue au cours du temps sous l'influence de phenomenes aleatoires qui sont la capture, la diffusion, les sources et les neutrons secondaires de fission. L'emission simultanee de plusieurs neutrons distingue ce phenomene des precedents qui n'affectent qu'un neutron individuellement. L'importance de ce phenomene sur la loi de fluctuation depend des dimensions de la cellule par rapport a la longueur de ralentissement. Quand ces dimensions sont petites, le caractere particulier de ce phenomene disparait. (auteur)

  5. A Physics and Tabulated Chemistry Based Compression Ignition Combustion Model: from Chemistry Limited to Mixing Limited Combustion Modes Un modèle de combustion à allumage par compression basé sur la physique et la chimie tabulée : des modes de combustion contrôlés par la chimie jusqu’aux modes contrôlés par le mélange

    Directory of Open Access Journals (Sweden)

    Bordet N.

    2011-11-01

    experimental measurements carried out on a 2 liter Renault Diesel engine and good agreements are found. Ce papier présente une nouvelle approche 0D phénoménologique pour prédire le déroulement de la combustion dans les moteurs Diesel à injection directe pour toutes les conditions d’utilisation usuelles. Le but de ce travail est de développer une approche physique en vue d’améliorer la prédiction de la pression cylindre et du dégagement d’énergie, avec un nombre minimum d’essais nécessaires à la calibration. Les contributions principales de cette étude sont la modélisation de la phase de pré-mélange de la combustion et une extension du modèle pour les stratégies d’injections multiples. Dans ce modèle, le taux de dégagement d’énergie dû à la combustion pour la phase pré-mélangée est relié à un taux de réaction moyen du carburant. Ce taux de réaction moyen de carburant est évalué à l’aide d’une approche basée sur un taux de réaction local de carburant tabulé et la détermination d’une fonction de densité de probabilité (PDF de la fraction de mélange (Z. Cette PDF permet de prendre en compte la distribution de richesse existante dans la zone pré-mélangée. L’allure de cette PDF présumée est une β-fonction standardisée. Les fluctuations de la fraction de mélange sont décrites avec une équation de transport pour la variance de Z. La définition standard de la fraction de mélange, établie dans le cas de flammes de diffusion, est ici adaptée à une combustion pré-mélangée de type Diesel pour décrire l’inhomogénéité de la richesse dans le volume de contrôle. La chimie détaillée est décrite au travers de la tabulation du taux de réaction relatif à la flamme principale et du délai d’auto-inflammation relatif à la flamme froide, ces tabulations sont fonction de la variable d’avancement c, du taux de gaz brûlé ainsi que des grandeurs thermodynamiques telles que la température et la pression. Le

  6. Development and testing of the EDF-2 reactor fuel element; Essais et mise au point de l'element combustible pour le reacteur EDF-2

    Energy Technology Data Exchange (ETDEWEB)

    Delpeyroux, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Furhmann, R [Societe Industrielle de Combustible Nucleaire (France)

    1964-07-01

    rassemble les etudes qui ont ete necessaires pour mener a bien la definition de l'element combustible EdF 2. Apres un bref rappel des caracteristiques du reacteur EdF 2 et des options preliminaires ayant permis de fixer un avant-projet d'element combustible, on aborde les etudes proprement dites: - Etudes uranium: essais de passage d'une couronne interne du tube en phase {beta}, flechage du tube sous l'action d'une force concentree, soudage des pastilles d'extremites et verification de leur etancheite. La tenue du tube a l'ecrasement et la resistance des pastilles a l'enfoncement sous l'action de la pression externe sont etudiees en detail dans un autre rapport CEA - Etudes gaine: rappel des conditions de fabrication et verification de l'etancheite de la gaine, tenue des ailettes au fluage sous l'action du courant gazeux - Etudes d'extremites: fluage en compression et soudage des bouchons a la gaine. - Etudes cartouche: determination des caracteristiques des gorges d'ancrage gaine-combustible et des conditions de gainage, verification de la tenue au cyclage thermique de l'element combustible, determination de la chute de temperature au contact gaine-combustible traitee en detail dans un autre rapport CEA, - Etudes de l'ensemble: les etudes se rapportant a la chemise de graphite, au support et aux vibrations de la cartouche ont ete traitees par le service des Etudes Mecaniques et Thermiques (Section de Mecanique), Dans ce domaine, la Section d'Etude d'Elements Combustibles a etudie la tenue des centreurs sous l'action du courant gazeux. L'aboutissement des etudes est constitue par le dessin de l'element combustible, le schema de fabrication et les normes de fabrication. La validite de l'ensemble de ces essais hors pile sera confirmee par des assais en pile qui sont en cours et par l'irradiation des elements dans le reacteur EdF 2 lui-meme. En conclusion, on donne l'orientation des etudes pour l'amelioration de l'element combustible et la definition d'un element combustible

  7. Pulse pile-up IV

    International Nuclear Information System (INIS)

    Wilkinson, D.H.

    1991-05-01

    The study of pulse pile-up is extended from the case of unipolar pulses, for which ruin theory is an excellent approximation, to the case of bipolar pulses for which ruin theory is not applicable to the effect of the back-kicks in reducing the pile-up: an appropriate solution is presented. (Author) 3 refs., 11 figs

  8. Grouting for Pile Foundation Improvement

    NARCIS (Netherlands)

    Van der Stoel, A.E.C.

    2001-01-01

    The aim of this research was to examine the use of grouting methods for pile foundation improvement, a generic term that is used here to define both foundation renovation (increasing the bearing capacity of a pile foundation that has insufficient bearing capacity) and foundation protection

  9. Settlement during vibratory sheet piling

    NARCIS (Netherlands)

    Meijers, P.

    2007-01-01

    During vibratory sheet piling quite often the soil near the sheet pile wall will settle. In many cases this is not a problem. For situations with houses, pipelines, roads or railroads at relative short distance these settlements may not be acceptable. The purpose of the research described in this

  10. Theoretical and experimental study of a calorimetric technique for measuring energy deposition in materials caused by complex pile irradiation; Etude theorique et experimentale d'une technique calorimetrique de mesure des depots d'energie dans les materiaux dus au rayonnement complexe de pile

    Energy Technology Data Exchange (ETDEWEB)

    Mas, P; Sciers, P; Droulers, Y [Commissariat a l' Energie Atomique. Centre d' Etudes Nucleaires, 38 - Grenoble (France)

    1962-07-01

    Calorimetric methods may be used to measure gamma fluxes greater than 10{sup 6} r/h near the cores of swimming pool reactors. The theory, design, and properties of isothermal calorimeters are discussed, and experimental results obtained with two types are presented. Measurement of energy deposition in materials and the long term integration of energy depositions are other uses of these devices. Results of measurements on heat deposition in steel and water are given. Fluxes were also measured. (authors) [French] Une premiere partie traite de la theorie des calorimetres isothermes mis en oeuvre au C.K.N. Grenoble. La puissance deposee dans le calorimetre par les flux de rayonnement echauffe celui-ci. L'echauffement est mesure a l'aide d'un thermocouple. On montre que l'on a ainsi une mesure absolue de cette puissance. Une deuxieme partie traite de l'etude experimentale de: deux types d'appareils utilises: leur construction, les resultats experimentaux, leurs utilisations. Trois de celles-ci sont particulierement interessantes: - la mesure des hauts flux gamma, - la mesure du depot d'energie dans les materiaux, - l'integration pendant une longue duree des depots d'energie (un modele de calorimetre a fonctionne a ce jour 2 500 heures et a integre 9 x 10 puissance 10 rads gamma et 6 x 10 puissance 18 neutrons rapides). La troisieme partie est consacree a l'etude des qualites de l'appareil: robustesse, fidelite, precision, sensibilite, gamme de mesure. Enfin dans la derniere partie sont decrites deux applications de la methode calorimetrique a la mesure du depot d'energie dans un acier special et dans l'eau. (auteurs)

  11. Recovery of trans-plutonium elements; Recuperation des elements transplutoniens

    Energy Technology Data Exchange (ETDEWEB)

    Espie, J Y; Poncet, B; Simon, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1970-07-01

    The object of this work is to study the recovery of americium and curium from the fission-product solution obtained from the processing of irradiated fuel elements made of natural metallic uranium alloyed with aluminium, iron and silicon; these elements have been subjected to an average irradiation of 4000 MW days/ton in a gas-graphite type reactor having a thermal power of 3.7 MW/ton of uranium. The process used consists of 3 extraction cycles and one americium-curium separation: - 1) extraction cycle in 40 per cent TBP: extraction of actinides and lanthanides; elimination of fission products; - 2) extraction cycle in 8 per cent D2EHPA: decontamination from the fission products, decontamination of actinides from lanthanides; - 3) extraction cycle in 40 per cent TBP: separation of the complexing agent and concentration of the actinides; - 4) americium-curium separation by precipitation. (authors) [French] Cette etude a pour objet, la recuperation de l'americium et du curium de la solution de produits de fission provenant du traitement de combustibles irradies a base d'uranium naturel metallique allie a l'aluminium, le fer, et le silicium, et ayant subi une irradiation moyenne de 4000 MWj/t dans une pile du type graphite-gaz, dont la puissance thermique est de 3.7 MW/t d'uranium. Le procede utilise comprend 3 cycles d'extraction et une separation americium-curium: - 1. cycle d'extraction dans le TBP a 40 pour cent: extraction des actinides et des lanthanides, elimination des produits de fission; - 2. cycle d'extraction dans le D2EHPA a 8 pour cent: decontamination en produits de fission, decontamination des actinides en lanthanides; - 3. cycle d'extraction dans le TBP a 40 pour cent: separation du complexant et concentration des actinides; - 4. separation americium-curium par precipitation. (auteurs)

  12. Numerical modeling of centrifuge cyclic lateral pile load experiments

    Science.gov (United States)

    Gerolymos, Nikos; Escoffier, Sandra; Gazetas, George; Garnier, Jacques

    2009-03-01

    To gain insight into the inelastic behavior of piles, the response of a vertical pile embedded in dry sand and subjected to cyclic lateral loading was studied experimentally in centrifuge tests conducted in Laboratoire Central des Ponts et Chaussées. Three types of cyclic loading were applied, two asymmetric and one symmetric with respect to the unloaded pile. An approximately square-root variation of soil stiffness with depth was obtained from indirect in-flight density measurements, laboratory tests on reconstituted samples, and well-established empirical correlations. The tests were simulated using a cyclic nonlinear Winkler spring model, which describes the full range of inelastic phenomena, including separation and re-attachment of the pile from and to the soil. The model consists of three mathematical expressions capable of reproducing a wide variety of monotonic and cyclic experimental p-y curves. The physical meaning of key model parameters is graphically explained and related to soil behavior. Comparisons with the centrifuge test results demonstrate the general validity of the model and its ability to capture several features of pile-soil interaction, including: soil plastification at an early stage of loading, “pinching” behavior due to the formation of a relaxation zone around the upper part of the pile, and stiffness and strength changes due to cyclic loading. A comparison of the p-y curves derived from the test results and the proposed model, as well as those from the classical curves of Reese et al. (1974) for sand, is also presented.

  13. Study of the {rho}-bar, {beta}-bar and {lambda} parameters of a light-water reactor; Etude des parametres {rho}-bar, {beta}-bar et {lambda} d'une pile a eau legere

    Energy Technology Data Exchange (ETDEWEB)

    Riche, R. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1965-09-01

    The kinetic and perturbation equations are derived from the time-dependent transport equation. Kinetic equations depend only on the ratios a = {rho}-bar/{beta}-bar and b = {beta}-bar/{lambda}, which are definite, while the reactivity {rho}-bar, the delayed neutron fraction ({beta}-bar and the generation time {lambda} are expressed in terms of an arbitrary function I. The 'static' definitions of these parameters, which reduce kinetic problems to a set of purely term dependent equations, introduce the effective fraction {beta}-bar. One way of determining experimentally the ratio b is presented; it consists in analysing the power transient after a rapid variation of the reactivity, caused by the implosion of an empty glass-bull. A simple interpretation is proposed. The apparatus can be transformed easily into a reactimeter. The value of the effective delayed neutron fraction {beta}-bar has been determined by averaging the reactivity effects of a copper sheet through out the reactor core. Experimental results: b = {beta}-bar/{lambda} = 129 s{sup -1} and {beta}-bar 795.10{sup -5}, have been determined on a light-water moderated, enriched-uranium fuelled reactor. The calculated values of the effectiveness of delayed neutrons {gamma} {beta}-bar/{beta} 1.23 and the generation time {lambda} 59.10{sup -6}s agrees fairly well with the experimental results. (author) [French] Les equations de la cinetique et de la perturbation sont deduites de la theorie du transport, par l'intermediaire de la 'notion' d'importance des neutrons. La cinetique ne depend que des rapports a = {rho}-bar/{beta}-bar et b = {beta}-bar/{lambda}, qui sont parfaitement definis; par contre, la reactivite {rho}-bar, la proportion de neutrons retardes {beta}-bar et le temps de generation des neutrons prompts {lambda} s'expriment a l'aide d'une meme fonction arbitraire I. Les definitions 'statiques' de ces parametres, qui permettent de rendre compte de la

  14. Study of the {rho}-bar, {beta}-bar and {lambda} parameters of a light-water reactor; Etude des parametres {rho}-bar, {beta}-bar et {lambda} d'une pile a eau legere

    Energy Technology Data Exchange (ETDEWEB)

    Riche, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1965-09-01

    The kinetic and perturbation equations are derived from the time-dependent transport equation. Kinetic equations depend only on the ratios a = {rho}-bar/{beta}-bar and b = {beta}-bar/{lambda}, which are definite, while the reactivity {rho}-bar, the delayed neutron fraction ({beta}-bar and the generation time {lambda} are expressed in terms of an arbitrary function I. The 'static' definitions of these parameters, which reduce kinetic problems to a set of purely term dependent equations, introduce the effective fraction {beta}-bar. One way of determining experimentally the ratio b is presented; it consists in analysing the power transient after a rapid variation of the reactivity, caused by the implosion of an empty glass-bull. A simple interpretation is proposed. The apparatus can be transformed easily into a reactimeter. The value of the effective delayed neutron fraction {beta}-bar has been determined by averaging the reactivity effects of a copper sheet through out the reactor core. Experimental results: b = {beta}-bar/{lambda} = 129 s{sup -1} and {beta}-bar 795.10{sup -5}, have been determined on a light-water moderated, enriched-uranium fuelled reactor. The calculated values of the effectiveness of delayed neutrons {gamma} {beta}-bar/{beta} 1.23 and the generation time {lambda} 59.10{sup -6}s agrees fairly well with the experimental results. (author) [French] Les equations de la cinetique et de la perturbation sont deduites de la theorie du transport, par l'intermediaire de la 'notion' d'importance des neutrons. La cinetique ne depend que des rapports a = {rho}-bar/{beta}-bar et b = {beta}-bar/{lambda}, qui sont parfaitement definis; par contre, la reactivite {rho}-bar, la proportion de neutrons retardes {beta}-bar et le temps de generation des neutrons prompts {lambda} s'expriment a l'aide d'une meme fonction arbitraire I. Les definitions 'statiques' de ces parametres, qui permettent de rendre compte de la cinetique par des equations dependant purement du

  15. Seismic response of pile foundations and pile forces caused by kinematic and inertial interaction

    International Nuclear Information System (INIS)

    Hartmann, H.G.; Waas, G.

    1985-01-01

    The horizontal motion and pile forces of pile groups subjected to earthquake excitation are analysed. The piles are modelled as linear elastic beam elements embedded in a layered linear visco-elastic soil medium. Pile-soil-pile interaction is included. The earthquake excitation results from vertically propagating shear waves. Kinematic and inertial interaction effects on foundation motion and pile forces are studied for a single pile, a small pile group and a large pile group. Soft and stiff soil conditions are considered, and the effect of a flexible vs. a rigid halfspace below the soil layers is shown. (orig.)

  16. 40 CFR 264.554 - Staging piles.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Staging piles. 264.554 Section 264.554... for Cleanup § 264.554 Staging piles. This section is written in a special format to make it easier to... staging pile? A staging pile is an accumulation of solid, non-flowing remediation waste (as defined in...

  17. Test Pile Reactivity Loss Due to Trichloroethylene

    International Nuclear Information System (INIS)

    Plumlee, K.E.

    2001-01-01

    The presence of trichloroethylene in the test pile caused a continual decrease in pile reactivity. A system which removed, purified, and returned 12,000 cfh helium to the pile has held contamination to a negligible level and has permitted normal pile operation

  18. The Non-Destructive Testing of Fuel Elements and Their Components for the United Kingdom Power-Reactor Development Programme; Controle Non Destructif des Elements Combustibles et de Leurs Parties Constitutives dans le Cadre du Programme de Developpement des Reacteurs de Puissance au Royaume-Uni; Nedestruktivnoe ispytanie teplovydelyayushchikh ehlementov i ikh komponentov dlya osushchestvleniya programmy soedinennogo korolevstva po razrabotke ehnergeticheskikh reaktorov; Ensayo No Destructivo de Elementos Combustibles y sus Componentes, en el Marco del Programa de Reactores de Potencia del Reino Unido

    Energy Technology Data Exchange (ETDEWEB)

    Mann, C. A.; Campsie, I. C. [U.K.A.E.A., Reactor Fuel Element Laboratories, Springfields, Salwick, Preston, Lancs. (United Kingdom)

    1965-10-15

    and the ends closed. In addition, the integrity of end closures is established, by radiography. Multiple exposures are commonly made to examine the whole of circumferential weld adequately. The disposition of the fuel can also be recorded accurately by using a panoramic technique. The use of colour radiography is also discussed. Pins are normally tested for leakage after filling with helium, using a mass-spectrometer leak detector. Pins not filled with helium may be tested using a ''back-pressurizing'' technique. Conventional ''probing'' and ''sniffing'' methods are used when it is desirable to locate the sites of leaks. The bubble test in liquids is also used, as a cheap and simple test. The use of krypton-85 as a tracer gas is discussed. (author) [French] Les auteurs decrivent les methodes d'essai que les laboratoires charges des elements combustibles ont elaborees dans le cadre du programme etabli par le des reacteurs> en vue de mettre au point des aiguilles de combustible pour diverses filieres de reacteurs. Ces aiguilles sont contenues dans des gaines de 5 a 15 mm de diametre, les materiaux utilises etant des aciers inoxydables et des alliages de zirconium, a) Detection de defauts dans les gaines. Examen par ultrasons a l'aide de deux traducteurs immerges. Les tubes sont animes d'un mouvement helicoidal rapide dans un reservoir fixe. Chaque signal de defaut est verifie et enregistre. Pour regler le dispositif et verifier sa stabilite, on utilise comme temoins des fentes'pratiquees a l'arc a la surface des tubes. Dans certains cas, on a egalement recours au controle par courants de Foucault. Les auteurs decrivent deux procedes: l'un, a debit rapide, est fonde sur un systeme de bobines encerclant le tube; l'autre, a exploration heliccfldale, utilise une bobine se deplacant le long du tube. Les signaux fournis par un circuit a pont sont selectionnes selon la phase et filtres, pour des frequences de 30 a 60 kHz. b) Controle des dimensions de tubes et de

  19. Release of Fission Products from UC-ZrC Fuel Inserts; Degagement des produits de fission liberes dans des noyaux combustibles UC-ZrC; Vydelenie produktov deleniya iz topliv UC - ZrC; Liberacion de productos de fision por pastillas de combustible de UC-ZrC

    Energy Technology Data Exchange (ETDEWEB)

    Barth, F.; Von der Decken, C. B.; Schifferstein, K. [Brown Boveri/Krupp Reaktorbau G.M.B.H., Duesseldorf (Germany); Clauss, A.; Reichel, H.; Rygaert, J.; Ruston, W. R. [Societe d' Etudes de Recherches et d' Applications pour l' Industrie (S.E.R.A.I.), Brussels (Belgium)

    1963-11-15

    energies obtained from different types of pellets, although the values of D/r{sub 0}{sup 2} sometimes differed by four orders of magnitude at the same sample temperatures. After irradiation, the activities of the isotopes I{sup 131}, Sr{sup 85}, Ba{sup 140} and Ce{sup 141} were determined in the graphite of the capsules. Except for I{sup 131}, the activities were higher than those expected for a release by recoil only. The values for Sr{sup 89}, Ba{sup 140} and Ce{sup 141} are too high to be a result of a diffusion of their corresponding rare gas precursors. It is assumed that the measured isotopes or their non-rare gas precursors were released by diffusion. (author) [French] Les auteurs ont etudie sous irradiation, dans une boucle, le degagement des produits de fission liberes par des pastilles dont la composition approximative etait UC + 20 ZrC. Il s'agissait de verifier la possibilite d'utiliser ces pastilles comme noyaux d'elements combustibles spheriques pour le reacteur a haute temperature actuellement construit a Juliers par la societe Brown-Boveri/Krupp Reaktorbau GmbH. Les essais ont ete faits sur des pastilles encapsulees dans du graphite et sur des pastilles non encapsulees. La surface de certaines pastilles etait constituee par une couche de carbure de zirconium pur d'une epaisseur de 1 a 2 mm. Les echantillons ent ete places dans des fours electriques a resistance pouvant atteindre une temperature de 1600{sup o}C. Pendant l'irradiation, les flux de neutrons etaient de 3 a 4 x 10{sup 10}n/cm{sup 2}s. La boucle permettait de mesurer, pendant l'irradiation, le degagement de {sup 85m}Kr, {sup 87}Kr, {sup 88}Kr, {sup 133}Xe et {sup 135}Xe et de determiner indirectement les quantites de {sup 133}I et {sup 135}I, apres l'arret du reacteur. Le degagement minimum de {sup 131}I, {sup 89}Sr, {sup 140}Ba et {sup 141}Ce a ete determine radiochimiquement apres retrait des echantillons. Il a ete egalement possible de mesurer la fraction de recul {epsilon}{sub R} seule, le

  20. The Windscale piles - past, present and future

    International Nuclear Information System (INIS)

    Jones, J.M.; Adams, A.L.

    1987-01-01

    The paper concerns the Windscale reactor piles, in which a fire occurred in the core of pile 1 thirty years ago. A description is given of the two Windscale piles, along with the events leading up to the accident, and the state of the piles following shutdown. The surveillance and maintenance to ensure that the pile and associated buildings were in a safe condition is outlined. The present state of the core, water ducts and pile chimneys is described. The present and future programme of work to ensure long term safety is discussed. This includes the initial steps in decommissioning of the piles. (U.K.)

  1. The Application of Various Nondestructive Testing Methods to Fuel Elements of the Orgel Type; Application des Differentes Methodes d'Essais Non Destructifs aux Elements Combustibles du Type Orgel; Primenenie razlichnykh nedestruktivnykh metodov ispytanij k toplivnym ehlementam tipa ''orgel''; Aplicacion de Distintos Metodos de Ensayo No Destructivo a los Elementos Combustibles de Tipo Orgel

    Energy Technology Data Exchange (ETDEWEB)

    Bonnet, P.; Jansen, J. [EURATOM, C.C.R., Ispra (Italy)

    1965-09-15

    . There is a device making it possible to examine four or six fuel elements simultaneously, or two or three separately. Standard radiographic tests. Particular stress is laid on the study of welds, and the limits of the experimental conditions in order to obtain good definition are given. In conclusion, the authors present a plan for a semi-industrial inspection system, describing the various possibilities for treatment, and try to define a general policy of non-destructive tests applied to fuel elements. (author) [French] Le memoire presente les differentes methodes employees pour la detection des defauts dans les tubes de gaine des elements combustibles (defauts de type dimensionnel ou defauts structuraux). Les auteurs evoquent egalement les tests finaux sur elements combustibles complets, en particulier: radiographie des soudures et tests d'etanchete. Ce sujet a deja ete partiellement traite. La recherche des caracteristiques dimensionnelles sur tube de gaine lisse en poudre d'aluminium frittee (SAP) a fait l'objet de recherches assez poussees. En particulier: 1. Mesures des diametres internes et externes par utilisation de capteurs pneumatiques et enregistrement des resultats; 2. Mesures des epaisseurs par utilisation, soit des ultrasons en methode de resonance, soit des rayons y (contrat EURATOM - Istituto Sperimentale Metalli Leggeri); 3. Controle de la fleche; 4. Tests sur tubes a ailettes. La detection des defauts sur tube de gaine lisse a egalement fait l'objet de travaux et un critere de rejet a ete adopte suivant l'utilisation future des tubes de gaines. a) La creation de defauts artificiels en fonction de la nocivite des defauts reels dans la poudre d'aluminium frittee est expliquee dans le memoire. Cette etude a montre, en effet, une grande sensibilite aux defauts du type longitudinal crees generalement lors de la transformation par de grosses inclusions. b) Tests par ultrasons. Defauts longitudinaux: Une comparaison entre la methode a deux capteurs et la

  2. Multi-Dimensional Modeling of Combustion and Pollutants Formation of New Technology Light Duty Diesel Engines Modélisation multidimensionnelle de la combustion et de la formation des polluants dans les nouveaux moteurs diesel automobiles

    Directory of Open Access Journals (Sweden)

    Belardini P.

    2006-12-01

    Full Text Available In the present paper some results, obtained by the use of modern numerical CFD tools, are presented. In particular, starting from the experimental characterization of a common rail DI Diesel engine, the empirical constants of the different submodels were tuned to obtain satisfactory results in some key test conditions. The main constraints of numerical models, to obtain a right scaling of pollutants predictions in the different test cases are analyzed. The numerical analysis demonstrates that the numerical CFD tools, at their stage of development, can help the engine designers to define the more promising strategies to obtain tailpipe emission control of common rail Diesel DI engines. Dans cet article, nous présentons les résultats obtenus en utilisant des outils de simulation de la mécanique des fluides numérique (CFD. À partir de résultats expérimentaux issus de la caractérisation d'un moteur Diesel common rail, les constantes empiriques de divers modèles ont été ajustées afin d'obtenir des résultats satisfaisants pour des cas tests représentatifs. Les principales contraintes des modèles numériques pour obtenir une bonne précision dans les différents cas d'études sont ici analysées. Cette analyse numérique montre que la CFD permet déjà, au stade de développement atteint, d'aider les ingénieurs à définir les stratégies les plus prometteuses pour maîtriser les émissions à l'échappement des moteurs Diesel à injection common rail.

  3. Piles of dislocation loops in real crystals

    International Nuclear Information System (INIS)

    Dubinko, V.I.; Turkin, A.A.; Yanovskij, V.V.

    1985-01-01

    Behaviour of piles of dislocation loops in crystals was studied in order to define metal swelling under irradiation. Energy of pile interaction with point defects and intrinsic pile energy are studied in the framework of the linear elasticity theory. Preference of dislocation pile calculated in the paper decreases with radiation dose hence, material swelling rate also decreases. Creation of conditions, which assume an existence of piles of dislocation loops being stable under irradiation, is of particular interest

  4. Instruments used to measure or check {alpha}, {beta}, {gamma} activity and neutron emission in the course of processing ore or irradiated fuel; Appareils de mesure ou de controle {alpha}, {beta}, {gamma}, n, des circuits des usines de traitement du minerai ou du combustible irradie

    Energy Technology Data Exchange (ETDEWEB)

    Blanc, A; Brunet, M; Kermagoret, M; Labeyrie, J; Roux, G; Vasseur, J; Weil, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1959-07-01

    One of the methods checking ores in the course of treatment is the rapid quantitative determination of thorium. This measurement is carried out by means of a scintillation instrument which shows the {beta} and {alpha} coincidences of ThC and ThC'. The treatment of irradiated fuel is accompanied by a large number of radioactive checks relative to the performance of the fixation and elution operations of uranium in the ion exchangers, to the concentration of radioactivity of effluent sent from the plant into watercourses. The operations of fixation and elution of the uranium are checked automatically by an instrument which takes a sample of 5 cm{sup 3} of solution, evaporates it and measures its activity every 10 or 20 minutes. Plutonium concentrations are measured: - in the presence of strong {beta} {gamma} activities, by means of rotating cylinder detectors; - in the presence of weak {beta} {gamma} activities, by means of {alpha} detectors scanning a constant level liquid surface; - by means of fission chambers relatively insensitive to {gamma}. Fission product concentrations are measured by chambers, counters or scintillators, according to the amount of {gamma} activity present. Finally, the activity of effluent to be emptied into watercourses is checked by means of a scintillation instrument, which measures the {alpha} activity on the one hand, and on the other hand the {beta} {gamma} activity of residue from a 100 cm{sup 3} sample taken and evaporated in 20 minutes. (author) [French] Parmi les controles relatifs au minerai en cours de traitement, figure le dosage rapide de thorium. Cette mesure est realisee au moyen d'un appareillage a scintillation qui met en evidence la coincidence des emissions {beta} et {alpha} du ThC et du ThC'. Le traitement des combustibles irradies s'accompagne d'un grand nombre de controles radioactifs portant sur le fonctionnement des operations de fixation et d'elution de l'uranium dans les echangeurs d'ions, sur la concentration du

  5. Visualisation of Gasoline and Exhaust Gases Distribution in a 4-Valve Si Engine; Effects of Stratification on Combustion and Pollutants Visualisation de la répartition du carburant et des gaz brûlés dans un moteur à 4 soupapes à allumage commandé ; effet de la stratification sur la combustion et les polluants

    Directory of Open Access Journals (Sweden)

    Deschamps B.

    2006-12-01

    des dégagements d'énergie et des émissions de polluants très distincts. Le niveau de tumbleet l'emplacement de l'étincelle sont aussi modifiés. L'observation de la stratification telle qu'elle est réellement dans le moteur constitue un moyen pertinent pour expliquer ses performances. Les paramètres permettant d'optimiser les niveaux de NOx et d'HC peuvent en être déduits, de même que l'efficacité des stratégies de recirculation et d'injection du carburant. Les résultats des visualisations ont été confirmés par des mesures obtenues dans un moteur monocylindre muni d'une culasse conventionnelle avec la même géométrie de chambre de combustion.

  6. 3d Simulation of Di Diesel Combustion and Pollutant Formation Using a Two-Component Reference Fuel Simulation 3D de la combustion et de la formation des polluants dans un moteur Diesel à injection directe en utilisant un carburant de référence à deux composants

    Directory of Open Access Journals (Sweden)

    Barths H.

    2006-12-01

    reference fuels. The contributions of the different reaction paths (thermal, prompt, nitrous, and reburn to the NO formation are shown. Finally, the importance of the mixing process for the prediction of soot emissions is discussed. En séparant calculs aérodynamiques et calculs chimiques, le modèle instationnaire de flamelet permet d'introduire des mécanismes chimiques complets qui comprennent plusieurs centaines de réactions. Ceci est indispensable pour décrire les différents processus qui ont lieu dans un moteur Diesel à injection directe (ID tels que l'auto-inflammation, la fin de la phase de prémélange partiel, la transition vers une combustion diffusive et la formation de polluants tels que les NOx et les suies. Il n'est pas nécessaire de simplifier les taux de réactions hautement non linéaires, d'autre part, la structure complète du processus de combustion est conservée. En utilisant le modèle de type Representative Interaction Flamelet (RIF, l'ensemble monodimensionnel instationnaire d'équations différentielles aux dérivées partielles est résolu en interaction avec le code CFD 3D. La solution ainsi obtenue est couplée avec les flux gazeux et le champ de mélange par l'intermédiaire de plusieurs paramètres dépendant du temps (l'enthalpie, la pression, le taux scalaire de dissipation. En retour, le modèle de flamelet fournit les concentrations moyennes des espèces chimiques, qui sont ensuite exploitées par le code CFD 3D pour calculer les champs de températures et les densités. La densité est nécessaire au code CFD 3D pour déterminer les flux turbulents et le champ de mélange. La formation des polluants est déterminée expérimentalement dans un moteur Diesel Volkswagen DI 1900. Le moteur est alimenté avec du gazole et deux carburants de référence. Un des carburants de référence est du n-décane pur. Le second est un carburant bicomposant formé de 70 % (du volume liquide de n-décane et de 30 % d'alpha-méthylnaphtalène (Idea

  7. Device for controlling the composition of the mixture burnt in the combustion spaces of an internal combustion engine. Einrichtung zur Regelung der Zusammensetzung des in den Brennraeumen einer Brennkraftmaschine zur Verbrennung kommenden Betriebsgemisches

    Energy Technology Data Exchange (ETDEWEB)

    Latsch, R; Bianchi, V

    1986-07-31

    The purpose of the invention is to create a device by which the extent of the reaction to the control of the composition of the mixture burnt in the combustion spaces of an internal combustion engine can be measured in a sensitive, responsive and safe way, where the position of the elements detecting the reaction should have a relatively small effect on the accuracy of the measurement and the extent of measurement. According to the invention, this problem is solved by the use of 2 thermal sensors connected to a control device (photo-electric diode, photo-electric transistor), one of which acts catalytically and causes the parts of the gas mixture there to react. The thermal sensor output signals are periodically integrated via the piston work and are entered in the control device. The measured temperature is a measure of how far the method of operation of the internal combustion engine has approached its limits. (HWJ).

  8. Underwater noise reduction of marine pile driving using a double pile.

    Science.gov (United States)

    2015-12-01

    Impact pile driving of steel piles in marine environments produces extremely high sound levels in the water. : It has been shown that current pile driving noise attenuation techniques, such as bubble curtains and : cofferdams, provide limited noise r...

  9. G2 - G3 inventive properties, the first french nuclear plants; Caracteristiques generales et aspects originaux des reacteurs G2 et G3

    Energy Technology Data Exchange (ETDEWEB)

    Pascal,; Horowitz,; Bussac,; Joatton,; de Meux, De Lagge; Martin, [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    This paper points out the inventive properties of the frenchctors G2 and G3. These are dual purpose reactors, i.e. designed for the production of both plutonium and energy (30 electrical MW); in this respect, they can be considered as the start point of the french electrical energy produced from nuclear fuel. The following points are specially discussed in this paper: the choice of the prestressed concrete pressure vessel, the horizontal arrangement of the channels, the interest of neutron flux flattening, the advantages of the charging and discharging device working during pile operation. (author)Fren. [French] Les caracteres originaux des reacteurs fran is G2 et G3 sont decrits dans ce rapport. Ce sont des reacteurs a double fin, plutonigenes et aussi producteurs d'energie (30 MW electriques); ils constituent a ce titre le point de depart de la production fran ise d'electricite d'origine nucleaire. Sont discutes, en particulier, dans ce rapport: le choix du caisson en beton precontraint pour tenir la pression, la disposition horizontale des canaux, l'interet de l'aplatissement du flux neutronique, les avantages de l'appareil permettant le chargement et le dechargement du combustible sans arreter la pile. (auteur)

  10. The use and evolution of the CEA research reactors; Utilisation et evolution des reacteurs de recherche du C.E.A

    Energy Technology Data Exchange (ETDEWEB)

    Rossillon, F; Chauvez, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    reacteurs en montrant ce qu'a ete jusqu'a present leur utilisation, et comment certaines modifications ont permis de les adapter a l'evolution des programmes. Ils precisent egalement les raisons qui ont conduit a l'elaboration du projet de la nouvelle pile OSIRIS, La pile ZOE, la plus ancienne du CEA, est en service au Centre de Fontenay-aux-Roses depuis 1948. Elle est principalement utilisee pour les mesures de section efficace d'absorption du graphite, et pour diverses irradiations de courte duree ne necessitant que des flux peu eleves. La Pile EL2, en service depuis 1952, a permis les premieres etudes liees au refroidissement par gaz. Elle a ete tres utilisee pour la production des radioisotopes et pour de nombreuses experiences de physique, de metallurgie et de physico-chimie - le vieillissement de certaines parties du reacteur a conduit a decider l'arret prochain de cette installation. La Pile EL. 3 a ete tres utilisee pour les experiences de physique et pour l'etude des combustibles. L'adoption d'une nouvelle structure pour le coeur (solution 'Cristal de neige') va permettre d'accroitre considerablement les possibilites de la pile pour les irradiations en neutrons rapides. La pile TRITON-I, piscine de 2 MW, est surtout utilisee pour les irradiations en neutrons rapides et en gamma. Certaines modifications, actuellement en cours, permettront d'accroitre la puissance du reacteur jusqu'a 4 ou 5 MW. Dans un compartiment voisin de TRITON-I est implantee la Pile TRITON-II, de meme structure generale, mais dont la puissance maximum est de 100 kW. TRITON-II est utilisee exclusivement pour les etudes de protections. MELUSINE, pile piscine de 2 MW est en fonctionnement au Centre d'Etudes Nucleaires de Grenoble depuis 1959. Elle a permis l'execution d'un programme important concernant surtout la physique du solide, l'etude fondamentale de combustibles refractaires et de graphites speciaux, et l'etude du comportement des liquides organiques sous radiations. Les installations de

  11. Proposal of a numerical modeling of reactive flows in combustion chambers of turbojet engines; Proposition d`une modelisation numerique des ecoulements reactifs dans les foyers de turboreacteurs

    Energy Technology Data Exchange (ETDEWEB)

    Ravet, F. [Rouen Univ., 76 - Mont-Saint-Aignan (France)]|[SNECMA, 77 - Moissy-Cramayel (France); Baudoin, Ch.; Schultz, J.L. [SNECMA, 77 - Moissy-Cramayel (France)

    1996-12-31

    Simplifying hypotheses are required when combustion and aerodynamic phenomena are considered simultaneously. In this paper, a turbulent combustion model is proposed, in which the combustion chemistry is reduced to a single reaction. In this way, only two variables are needed to describe the problem and combustion can be characterized by the consumption of one of the two reactive species. In a first step, the instantaneous consumption rate is obtained using the Lagrangian form of the mass fraction equation of the species under consideration, and by considering the equilibrium state only. This state is determined in order to preserve the consistency with results that should be obtained using a complete kinetics scheme. In a second step, the average rate is determined using the instantaneous consumption term and a probabilistic density function. This model was tested on various configurations and in particular on an experimental main chamber and on a reheating chamber. Results indicate that this model could be used to predict temperature levels inside these combustion chambers. Other applications, like the prediction of pollutant species emission can be considered. (J.S.) 12 refs.

  12. Experimental measurement of neutron spectrum in the reflector of a light water reactor; Determination experimentale du spectre des neutrons dans le reflecteur d'une pile a eau legere

    Energy Technology Data Exchange (ETDEWEB)

    Brethe, P [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1963-09-15

    1. Thermal neutrons: The temperature of the thermal neutron spectrum was calculated using Au-Lu foils. This temperature varies from 300 deg. K (temperature of the moderator) at 30 cm of the core to 350 deg. K in a hole of the core. 2. Slowing down of neutron: Four resonance detectors have been used (Au, In, Co, Mn). We can write a 1/E form of the spectrum. The linking up energy E{sub M} between thermal neutron spectrum and slowing down spectrum is about 0.23 eV and is free from the Maxwell spectrum temperature. The decrease of slowing down flux regarding thermal flux, farther from the core, has been showed. 3. Fast neutrons: We used 3 threshold detectors (Ni, Al, Mg). We supposed a E{sup 1/2} e{sup -{beta}}{sup E} from of the spectrum above 3 MeV. The values of {beta} are in a range from 0.775, at the centre of the core and in a loop-hole, to 0,64 at about 30 cm of the core. 4. Continuous shape of the spectrum: The following interpolations give useful informations between the field where measurements have been made: between 340 eV and 10 keV: 1/E form between 10 keV and 330 keV: 1/(E {sigma}{sub S}(E)) form ({sigma}{sub S}(E) elastic scattering section on hydrogen) between 330 keV and 3 MeV: calculated form by the moments method (ref. BSR). (author) [French] 1. Neutrons thermiques: La temperature du spectre des neutrons thermiques a ete determinee par la methode (or-lutecium). Cette temperature varie de 300 deg. K (temperature du moderateur) a 30 cm du coeur, a 350 deg. K dans une encoche du coeur. 2. Neutrons en ralentissement: 4 detecteurs resonnants ont ete employes (Au, In, Co, Mn). Le spectre peut etre mis sous la forme 1/E quelle que soit la distance a la limite coeur-reflecteur. L'energie de raccordement E{sub M} entre spectre des neutrons thermiques et spectre en ralentissement est environ 0,23 eV et independante de la temperature du spectre de Maxwell. La diminution relative du flux en ralentissement par rapport au flux thermique quand la distance au coeur

  13. Experimental study of the aluminum droplet combustion under forced convection. Influence of the gaseous atmosphere; Etude experimentale de la combustion des gouttes d'aluminium en convection forcee. Influence de l'atmosphere gazeuse

    Energy Technology Data Exchange (ETDEWEB)

    Sarou-Kanian, V.

    2003-12-15

    Because of its high energetic power, the combustion of aluminum particles in solid propellant rocket motors improves the efficiency of heavy-lift launcher as Ariane 5. Aluminum particles burn in a gaseous atmosphere essentially composed of H{sub 2}O, CO{sub 2}, N{sub 2}, HCl, H{sub 2}, and CO, at high pressure (P=60-70 atm) and high temperature (T>3000 K). In the present work, we have been particularly interested in the influence of the gaseous atmosphere on the different burning processes both in the gas-phase and at the aluminum droplet surface. An experimental set-up was developed in order to describe precisely, thanks to several analysis techniques (high-speed camera, pyrometry, spectrometry, SEM, nuclear activation) the combustion of aerodynamically levitated millimetric aluminum droplets in gas mixtures with compositions close to the propellant ones (H{sub 2}O, CO{sub 2}, N{sub 2}). The main result is that each species plays a different role in the aluminum combustion. The water vapor has the biggest influence in the gas-phase process due to the production of hydrogen facilitating the heat and mass diffusion between the flame and the droplet. Nitrogen is essentially acting in surface reactions with the formation of aluminum nitride (AlN) and oxynitride (AlON) which may completely cover the droplet and stop the gas-phase combustion. Carbon dioxide has a double effect. On the one hand, CO{sub 2} burns in the flame, but it is less efficient than H{sub 2}O because the heat and mass transfer properties are poorer for CO than for H{sub 2}. On the other hand, a carbon dissolution phenomenon occurs in the aluminum droplet during burning which may reach saturation (20-25% molar) and involves a carbon rejection at the surface leading to the end of the gas-phase combustion. (author)

  14. Determination of the Effectiveness of Control Rods in the VVER Reactor Fuel Assemblies; Determination de l'Efficacite des Barres de Reglage dans les Ensembles Combustibles du reacteur VVER; Opredelenie ehffektivnosti reguliruyushchikh sterzhnej v sborkakh reaktora VVEHR; Determinacion de la Eficacia de las Barras de Control en los Conjuntos de Elementos Combustibles del Reactor VVER

    Energy Technology Data Exchange (ETDEWEB)

    Semenov, V. N.; Lunin, G. L.; Komissarov, L. V.; Kamyshan, A. N.; Halizev, V. I.; Andrianov, G. Ja.; Voznesenskij, V. A.; Kuz' micheva, V. A.; Lebedev, V. I. [Ordena Lenina Institut Atomnoj Energii Im. I.V. Kurchatova, Moskva, SSSR (Russian Federation)

    1964-06-15

    The paper describes experiments done in homogeneous mock-ups of the fuel assemblies from the VVER Reactor (at one level of enrichment) to determine the effectiveness of absorbing systems comprising shim fuel assemblies or water cavities and of absorbing rods clad in jackets made of differing materials. The paper also gives data on some experiments that have been done in mock-ups of assemblies with differing levels of enrichment. These experiments make it possible to verify the methods used in calculation and to evaluate the prospects of using them for heterogeneous reactors. (author) [French] Le memoire decrit les experiences qui ont ete faites pour determiner l 'efficacite des absorbants contenus dans les barres de compensation, l'effet cavitaire et l 'efficacite des absorbants gaines de materiaux divers, au moyen d'assemblages homogenes de cartouches de combustible du reacteur VVER (reacteur de puissance ralenti et refroidi a l 'eau ayant le meme taux d'enrichissement. On y trouve en outre des donnees sur certaines experiences executees a l 'aide d'assemblages de cartouches de combustible taux d'enrichissement differents. Ces travaux permettent de verifier la methode de calcul et d'evaluer ses possibilites d'application aux reacteurs non homogenes. (author) [Spanish] Se describen en la memoria experimentos para determinar la eficacia de los materiales absorbentes contenidos en las barras de compensacion, el efecto de cavitacion y la eficacia de los materiales absorbentes revestidos de diversos materiales, realizados con ayuda de los conjuntos homogeneos de elementos combustibles del reactor VVER (reactor de potencia moderado y refrigerado por agua) con un solo grado de enriquecimiento. Ademas, se exponen datos sobre los experimentos efectuados con ayuda de conjuntos de grados de enriquecimientos; variados. Tales experimentos permiten verificar el metodo de calculo teorico, utilizad o y evaluar la posibilidad de aplicarlo a los reactores no homogeneos. (author

  15. Gas-flow detector for uranium contamination on finned-can surface of a reactor fuel; Detecteur a courant gazeux pour deceler la contamination en uranium des nervures des gaines de combustible nucleaire; Gazopotochnyj detektor zagryazneniya uranom rebristoj poverkhnosti obolochki reaktornykh teplovydelyayushchikh ehlementov; Detector de flujo gaseoso para medir la contaminacion de uranio en la superficie de la vaina de aletas de los elementos combustibles para reactores

    Energy Technology Data Exchange (ETDEWEB)

    Miwa, H; Shiojiri, T; Maeda, Y [Kobe Kogyo Corporation, Okubo, Akashi, Hyogo (Japan)

    1962-04-15

    Calder Hall-type reactor-fuel and all JRR-3 fuels are to be inspected by this counter. (author) [French] Le detecteur a courant gazeux presente par les auteurs est un compteur proportionnel a grille, specialement concu pour deceler la contamination en uranium des nervures des gaines de combustible nucleaire. Un compteur proportionnel classique, compose seulement d'une cathode et d'un collecteur, n'est guere capable de deceler les particules alpha emises par l'uranium contaminant une surface rugueuse telle que les nervures d'une gaine de combustible nucleaire, par suite du manque d'uniformite du champ electrique pres de la surface. C'est pourquoi les auteurs ont construit un compteur proportionnel a grille. Cet appareil, de forme cylindrique, comprend le combustible, une grille, des collecteurs et une cathode, tous les elements etant disposes suivant le meme axe. Le combustible est place au centre de la grille a laquelle on applique une tension negative. L'espace entre le combustible et la grille sert de collecteur d'ions. La grille, faite de fils paralleles minces en tungstene, disposes suivant un cylindre autour du combustible, est reliee a la terre. Les collecteurs sont constitues de 16 minces fils de tungstene disposes de la meme maniere que la grille, mais chaque fil est isole electriquement des autres. Tous les collecteurs sont interconnectes par des resistances de 5 x 10{sup 4} ohms et relies au positif de la haute tension par une resistance. L'espace entre la grille, les collecteurs et la cathode sert a la multiplication du gaz, tout comme dans un compteur proportionnel classique. Chaque resistance de 5 x 10{sup 4} ohms isole la capacite parasite de chaque collecteur. La sortie du detecteur est couplee a un amplificateur a faible impedance d'entree. La faible impedance d'entree diminue aussi l'influence facheuse de la capacite parasite du circuit d'entree. Il en resulte un rapport favorable signal/bruit de fond, ce qui permet une bonne detection des particules

  16. Irradiation Behaviour of Uranium Carbide Fuels; Comportement des carbures d'uranium sous l’effet de l'irradiation; ПОВЕДЕНИЕ УРАНО-КАРБИДНОГО ТОПЛИВА ПРИ ОБЛУЧЕНИИ; Comportamiento de los combustibles de carburo de uranio frente a la irradiación

    Energy Technology Data Exchange (ETDEWEB)

    Sinizer, D. I.; Webb, B. A.; Berger, S. [Atomics International, Canoga Park, CA (United States)

    1963-08-15

    is a void-free, single-phase microstructure in the decarburized region of the originally hyperstoichiometric fuel. No carbon transfer is observed with hypo- stoichiometric U-C. Carbon removed from hyperstoichiometric (J-C fuel is readily transferred across the Na bond to carburize stainless-steel cladding in both in-pile and out-of-pile experiments. This transfer represents a possible limitation of choice of fuel composition for Na-bonded stainless-steel-clad elements. Nevertheless, available data lead to the present conclusions that stoichiometric or hyperstoichiometric U-C Na-bonded to stainless steel can be effectively used in Na-cooled power reactors. Fission-gas release or fuel swelling do not represent limitations under presently conceived Na-cooled reactor conditions. Alternative cladding materials such as Cb alloys or gas-bonded fuel elements may be required for ultra-high-temperature applications. (author) [French] Des combustibles UC ayant uùe composition quasi stoechiométrique, obtenus par fusion à l’arc électrique et enfermés dans des gaines en acier inoxydable avec lien de sodium ou de NaK, ont été irradiés à des températures au centre allant jusqu'à 1950°F (1065°C) [température moyenne: 1750°F (950°C)] et des taux de combustion allant jusqu'à 25 000 MWj/t d'U, Les combustibles stoechiométriques et légèrement tiyperstoechiométriques accusent une augmentation à peu près linéaire du diamètre pour des taux de combustion allam jusqu'à 25 000 MWj/t d'U. Pour une température au centre moyenne de 1500°F (815°C), l'augmentation de diamètre est inférieure à 3% au-dessus de 25 000 MWj/t d’U; elle est proportionnellement moindre losque la température du combustible s'abaisse. A la température moyenne de 1000°F (540°C), on observe une dilatation qui est à peu près égal à celle que l'on peut prévoir du fait de l'accumulation des produits de fission. La libération des gaz de fission est estimée à moins de 1% au-dessus de

  17. Energy piles. A fundamental energy pile; Energiepfaehle. Eine fundamentale Energiequelle

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, Holger; Beldermann, Nico [GF-Tec GmbH, Roedermark (Germany)

    2013-03-01

    The Maintower, the new airport in Berlin/Brandenburg, a lot of Ikea buildings, and also small office buildings or residential buildings may exchange energy with the underground by means of pile fundaments. At the correct planning and execution, energy piles are low-cost geothermal power plants which sustainable generate heating and cooling for the buildings standing on them. Even more energy can be generated safely under compliance with the groundwater protection by means of a new development of the material and the transfer.

  18. Retrofit MHB Hamm. Process-related optimization of the combustion air system MHB Hamm; Retrofit MHB Hamm. Prozess- und verfahrenstechnische Optimierung des Verbrennungsluftsystems MHB Hamm

    Energy Technology Data Exchange (ETDEWEB)

    Schumacher, Frank [SC Schumacher Consulting handelnd fuer Xervon Energy GmbH, Ritterhude (Germany); Lindke, Carsten [MHB Hamm Betriebsfuehrungsgesellschaft mbH, Hamm (Germany); Auel, Werner [Xervon Energy GmbH, Duisburg (Germany)

    2012-11-01

    The authors of the contribution under consideration report on a process-related optimization of the combustion air system of the waste incinerator Hamm. Subsequently to the historical aspects of this waste incinerator and the development of its calorific values, the authors describe the tender Retrofit, its implementation as well as the first practical experiences.

  19. Techniques de combustion Combustin Techniques

    Directory of Open Access Journals (Sweden)

    Perthuis E.

    2006-11-01

    Full Text Available L'efficacité d'un processus de chauffage par flamme est étroitement liée à la maîtrise des techniques de combustion. Le brûleur, organe essentiel de l'équipement de chauffe, doit d'une part assurer une combustion complète pour utiliser au mieux l'énergie potentielle du combustible et, d'autre part, provoquer dans le foyer les conditions aérodynamiques les plus propices oux transferts de chaleur. En s'appuyant sur les études expérimentales effectuées à la Fondation de Recherches Internationales sur les Flammes (FRIF, au Groupe d'Étude des Flammes de Gaz Naturel (GEFGN et à l'Institut Français du Pétrole (IFP et sur des réalisations industrielles, on présente les propriétés essentielles des flammes de diffusion aux combustibles liquides et gazeux obtenues avec ou sans mise en rotation des fluides, et leurs répercussions sur les transferts thermiques. La recherche des températures de combustion élevées conduit à envisager la marche à excès d'air réduit, le réchauffage de l'air ou son enrichissement à l'oxygène. Par quelques exemples, on évoque l'influence de ces paramètres d'exploitation sur l'économie possible en combustible. The efficiency of a flame heating process is closely linked ta the mastery of, combustion techniques. The burner, an essential element in any heating equipment, must provide complete combustion sa as to make optimum use of the potential energy in the fuel while, at the same time, creating the most suitable conditions for heat transfers in the combustion chamber. On the basis of experimental research performed by FRIF, GEFGN and IFP and of industrial achievements, this article describesthe essential properties of diffusion flames fed by liquid and gaseous fuels and produced with or without fluid swirling, and the effects of such flames on heat transfers. The search for high combustion temperatures means that consideration must be given to operating with reduced excess air, heating the air or

  20. Stability of Slopes Reinforced with Truncated Piles

    Directory of Open Access Journals (Sweden)

    Shu-Wei Sun

    2016-01-01

    Full Text Available Piles are extensively used as a means of slope stabilization. A novel engineering technique of truncated piles that are unlike traditional piles is introduced in this paper. A simplified numerical method is proposed to analyze the stability of slopes stabilized with truncated piles based on the shear strength reduction method. The influential factors, which include pile diameter, pile spacing, depth of truncation, and existence of a weak layer, are systematically investigated from a practical point of view. The results show that an optimum ratio exists between the depth of truncation and the pile length above a slip surface, below which truncating behavior has no influence on the piled slope stability. This optimum ratio is bigger for slopes stabilized with more flexible piles and piles with larger spacing. Besides, truncated piles are more suitable for slopes with a thin weak layer than homogenous slopes. In practical engineering, the piles could be truncated reasonably while ensuring the reinforcement effect. The truncated part of piles can be filled with the surrounding soil and compacted to reduce costs by using fewer materials.

  1. Burners. The decrease of nitrogen oxides in combustion process: the 2 nd generation GR LONOxFLAM burner; Les bruleurs, la reduction des oxydes d`azote dans la combustion: bruleur GR LONOxFLAM de 2. generation

    Energy Technology Data Exchange (ETDEWEB)

    Gauthier, J.C. [EGCI Pillard, 13 - Marseille (France)

    1997-12-31

    The Pillard company has developed, in cooperation with GDF (the French national gas utility), the GR-LONOxFLAM burner concept for reducing NOx emission levels and solid combustion products. The concept consists, for gaseous fuels, in the combination of an internal recirculation and a gas staging process; for liquid fuels, a separated flame process and air staging are combined. These concepts allow for an important reduction in NOx and non-burned residues, even with standard-size burners

  2. Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles.

    Science.gov (United States)

    Hosseini, Seyedehsan; Shrivastava, Manish; Qi, Li; Weise, David R; Cocker, David R; Miller, John W; Jung, Heejung S

    2014-06-01

    Low-density polyethylene (LDPE) plastic is used to keep piled debris from silvicultural activities--activities associated with development and care of forests--dry to enable efficient disposal by burning. The effects of inclusion of LDPE in this manner on smoke emissions are not well known. In a combustion laboratory experiment, 2-kg mixtures of LDPE and manzanita (Arctostaphylos sp.) wood containing 0, 0.25, and 2.5% LDPE by mass were burned. Gaseous and particulate emissions were sampled in real time during the entire flaming, mixed combustion phase--when the flaming and smoldering phases are present at the same time--and during a portion of the smoldering phase. Analysis of variance was used to test significance of modified combustion efficiency (MCE)--the ratio of concentrations of fire-integrated excess CO2 to CO2 plus CO--and LDPE content on measured individual compounds. MCE ranged between 0.983 and 0.993, indicating that combustion was primarily flaming; MCE was seldom significant as a covariate. Of the 195 compounds identified in the smoke emissions, only the emission factor (EF) of 3M-octane showed an increase with increasing LDPE content. Inclusion of LDPE had an effect on EFs of pyrene and fluoranthene, but no statistical evidence of a linear trend was found. Particulate emission factors showed a marginally significant linear relationship with MCE (0.05 burned. In general, combustion of wet piles results in lower MCEs and consequently higher levels of emissions. Current air quality regulations permit the use of burning to dispose of silvicultural piles; however, inclusion of low-density polyethyelene (LDPE) plastic in silvicultural piles can result in a designation of the pile as waste. Waste burning is not permitted in many areas, and there is also concern that inclusion of LDPE leads to toxic air emissions.

  3. Pile oscillator measurements of thermal absorption cross sections of Al, Mg, Fe and Cu; Mesure des sections efficaces thermiques d'absorption de l'Al, du Mg, du Fe et du Cu par la methode d'oscillation

    Energy Technology Data Exchange (ETDEWEB)

    Carre, J C; Vidal, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The phase oscillation technique used at ZOE has the property of reducing of a marked factor the effect of neutron scattering by the sample. The absorption cross sections of poorly absorbing and highly scattering materials have been measured; for neutrons of 2,200 m/s, the following values are obtained: 229 {+-} 3 mb for Al; 64.2 {+-} 1.5 mb for Mg, 2.53 {+-} 0.03 b for Fe and 3.74 {+-} 0.04 b for Cu. (authors) [French] La methode d'oscillation de phase utilisee a ZOE possede la propriete de diminuer d'un facteur important l'influence de la diffusion. Les sections efficaces de capture de materiaux peu capturants et tres diffusants, ont ete mesurees; pour des neutrons de 2200 m/s, on obtient pour l'Al: 229 {+-} 3mb, pour le Mg: 64,2 {+-} 1,5 mb, pour le Fe: 2,53 {+-} 0,03 b et pour le Cu: 3,74 {+-} 0,04 b. (auteurs)

  4. Experimental and numerical study of flows in PEM fuel cell stacks for traction applications; Etude numerique et experimentale des ecoulements dans une pile a combustible de type PEM adaptable aux applications embarquees

    Energy Technology Data Exchange (ETDEWEB)

    Picot, D

    1998-07-01

    The problems with the optimization and design of proton exchange membrane fuel cells (PEMFC) are mainly based on the mastery of water and heat transfers inside the active cells. A theoretical and experimental discussion about this topic is proposed. The average sharing coefficients of the generated water are measured for 3 Nora fuel cells (1, 5 and 10 kW). The values obtained with nafion 117 are in agreement with the data of the literature, while the 40% generated water recovered inside the anode compartment with nafion 115 are unexpected. The difficulty to obtain a physical formulation of electro-osmosis does not allow to quantify this coefficient and leads to justify the limitations of use of the numerical codes on this topic. However, by separating the intrinsic parameters of the electrodes/membrane system and the global operation parameters of a cell, it is possible to extrapolate realistic humidification strategies. In the framework of the European project 'Fever', a systemic model of a 30 kW module for electric-powered vehicle has been developed. For an optimum energy integration of Nora fuel cells in volume-limited applications, it is necessary to separate the humidification sections of these modules. In the case where air is used as oxidant, the presence of nitrogen inside the anode compartment has been evidenced both in close and recirculation modes. In agreement with the literature data about nafion permeability, the nitrogen migration through the electrolyte is explained by the diffusion theory. A discussion about the interest of using both operational modes to maximize the energy efficiency is proposed. Finally, a simple-phase and double-phase numerical study with interface reconstruction is carried out using the resolution of Navier-Stokes equations in Eulerian formalism in order to consider the problems linked with the internal flows inside the collectors of Nora cells. (J.S.)

  5. Preparation and electrocatalytic activity of platinum nano-particles in electrodes of proton exchange membrane fuel cell; Preparation et activite electrocatalytique des nano-particules de platine dans les electrodes de piles a combustible a membrane echangeuse de protons

    Energy Technology Data Exchange (ETDEWEB)

    Antoine, Olivier

    1998-07-01

    This work treats of the basic study of the reactions taking place on platinum nano-particles inside the active layers of proton exchange membrane fuel cells (PEMFC): oxygen reduction and hydrogen oxidation, and of the applied study of a method for the in-situ preparation of these particles. The study of oxygen reduction completes the previous works by confirming the effect of the particles size on the reaction kinetics (optimum of mass activity towards 3 nm of diameter), by considering the effect of the temperature and of the substrate, and also by the study of H{sub 2}O{sub 2} production at the disc-ring electrode and the reaction mechanism using impedance spectroscopy measurements: like with massive platinum in acid environment, the Damjanovic mechanism is retained for the platinum nano-particles. Hydrogen oxidation is much faster and limited by gas diffusion, and thus is more difficult to study. This work required the use of sophisticated correction programs and of an original geometry (very thin active layer: L < 1 {mu}m) to show a clear effect of the particle size on the kinetics: the catalytic activity increases with the smallest particles. This study has also tried to precise the poorly known reaction mechanism: the Heyrovsky-Volmer mechanism has been retained but it needs to be confirmed. The optimization of the catalyst used requires 3 nm particles for a maximum oxygen reduction mass activity and mass percentages Pt/(Pt+C)30% in order to minimize the thickness of the active layer and the diffusion limitations. An original in-situ electrochemical method respecting these conditions has been developed. Starting from carbon impregnated with platinum salts, it allows the deposition of catalyst nano-particles on the carbon in Nafion. (J.S.)

  6. Characterizing Axial Stiffness of Individual Batter Piles with Emphasis on Elevated, Laterally Loaded, Clustered Pile Groups

    Science.gov (United States)

    2016-11-01

    using the appropriate stiffness based on the direction of the calculated pile load. 1...load cases. CPGA utilizes the stiffness method (Saul 1968) of three-dimensional pile group analysis for user-specified static loadings. The pile...CPGA analysis and coordinate systems (global and pile) As discussed in Chapter 1, the CPGA software utilizes the stiffness method (Saul 1968) of

  7. Analysis of pile foundations under dynamic loads

    International Nuclear Information System (INIS)

    Waas, G.; Hartmann, H.G.

    1981-01-01

    A method is presented for the analysis of pile foundations which are subjected to horizontal dynamic loads from earthquakes, airplane impact, gas explosion or other sources. The motion of the pile cap and the pile forces are computed. - The loads may be applied to the pile cap or directly to the piles (e.g. by earthquake wave motion). The soil may be stratified and is considered to be an elastic or visco-elastic medium. The piles are assumed vertical. The method makes use of an approximate fundamental solution for displacements caused by a dynamic point load in a layered visco-elastic medium. The approximation involves a discretization of the medium in the vertical direction. In horizontal directions the medium is treated by continuum theory. The soil medium supports each pile at about 10 to 20 nodes. A dynamic flexiblity matrix for the soil is derived which relates the elastic, damping and inertial forces of the soil to the displacements at each node. It includes effects of radiation damping. All piles are coupled through the soil flexibility matrix. The piles are modelled by beam elements. Transient response is computed using fast discrete Fourier transforms. The arrangement of the piles is arbitrary. However, simple and double symmetry can be accounted for by the computer program. When the pile arrangement is axisymmetric, the degrees of freedom can be reduced to only those of two piles per ring. The influence of the number of piles and the influence of the pile spacing on group stiffness and on pile forces is presented for two soil profiles. Dynamic effects on pile forces of a foundation for a reactor building are studied. They are significant when soils are soft. (orig.)

  8. Developments in natural uranium - graphite reactors; Developpement des reacteurs a graphite et uranium naturel

    Energy Technology Data Exchange (ETDEWEB)

    Bourgeois, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Saitcevsky, B [Electricite de France (EDF), 75 - Paris (France)

    1964-07-01

    in order to show the advantages resulting from such developments in gas-graphite natural metallic uranium reactor systems; these are: a doubling of the specific and volume powers, and a three-fold reduction in the number of channels. The research now under way will make it possible to calculate the reduction in capital costs which will result from these important technical advances. (authors) [French] Le programme francais de centrales a graphite et uranium naturel s'est developpe, d'EDF 1 a EDF 4 - dans la voie d'un accroissement de la puissance unitaire des installations, de la puissance specifique et de la puissance volumique, et d'une amelioration des conditions de securite de fonctionnement. La puissance elevee d'EDF 4 (500 MWe) et l'integration du circuit primaire dans le caisson, lui-meme en beton precontraint, permettent ainsi de tirer le meilleur parti des elements combustibles tubulaires utilises des EDF 1, et d'arriver ainsi a une solution tres satisfaisante. L'emploi d'un element combustible refroidi interieurement (element annulaire) permet de faire un nouveau pas en avant: il devient alors possible d'augmenter la pression du gaz de refroidissement sans craindre le fluage du tube d'uranium. L'emploi d'un caisson en beton precontraint permet une telle augmentation de pression, et l'integration du circuit primaire elimine les risques d'une depressurisation rapide qui aurait presente dans ce cas un risque majeur. On aborde dans ce rapport les principaux problemes poses par ce nouveau type de centrale et on indique les grandes lignes des recherches et etudes effectuees en France: - Les etudes de neutronique et thermique ont permis d'envisager l'emploi d'elements combustibles de grandes dimensions (diametre interne = 77 mm, diametre externe = 95 mm), tout en conservant l'uranium naturel. - Les problemes de fabrication de ces elements, et de leur comportement en pile, font l'objet d'un programme important, tant hors pile que dans les piles de puissance (EDF 2

  9. Developments in natural uranium - graphite reactors; Developpement des reacteurs a graphite et uranium naturel

    Energy Technology Data Exchange (ETDEWEB)

    Bourgeois, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Saitcevsky, B. [Electricite de France (EDF), 75 - Paris (France)

    1964-07-01

    in order to show the advantages resulting from such developments in gas-graphite natural metallic uranium reactor systems; these are: a doubling of the specific and volume powers, and a three-fold reduction in the number of channels. The research now under way will make it possible to calculate the reduction in capital costs which will result from these important technical advances. (authors) [French] Le programme francais de centrales a graphite et uranium naturel s'est developpe, d'EDF 1 a EDF 4 - dans la voie d'un accroissement de la puissance unitaire des installations, de la puissance specifique et de la puissance volumique, et d'une amelioration des conditions de securite de fonctionnement. La puissance elevee d'EDF 4 (500 MWe) et l'integration du circuit primaire dans le caisson, lui-meme en beton precontraint, permettent ainsi de tirer le meilleur parti des elements combustibles tubulaires utilises des EDF 1, et d'arriver ainsi a une solution tres satisfaisante. L'emploi d'un element combustible refroidi interieurement (element annulaire) permet de faire un nouveau pas en avant: il devient alors possible d'augmenter la pression du gaz de refroidissement sans craindre le fluage du tube d'uranium. L'emploi d'un caisson en beton precontraint permet une telle augmentation de pression, et l'integration du circuit primaire elimine les risques d'une depressurisation rapide qui aurait presente dans ce cas un risque majeur. On aborde dans ce rapport les principaux problemes poses par ce nouveau type de centrale et on indique les grandes lignes des recherches et etudes effectuees en France: - Les etudes de neutronique et thermique ont permis d'envisager l'emploi d'elements combustibles de grandes dimensions (diametre interne = 77 mm, diametre externe = 95 mm), tout en conservant l'uranium naturel. - Les problemes de fabrication de ces elements, et de leur comportement en pile

  10. Pile load test on large diameter steel pipe piles in Timan-Pechora, Russia

    Energy Technology Data Exchange (ETDEWEB)

    McKeown, S. [Golder Associates Inc., Houston, TX (United States); Tart, B. [Golder Associates Inc., Anchorage, AK (United States); Swartz, R. [Paragon Engineering Services Inc., Houston, TX (United States)

    1994-12-31

    Pile load testing conducted in May and June of 1993 at the Polar Lights Ardalin project in Arkangelsk province, Russia, was documented. Pile load testing was conducted to determine the ultimate and allowable pile loads for varying pile lengths and ground temperature conditions and to provide creep test data for deformation under constant load. The piles consisted of 20 inch diameter steel pipe piles driven open ended through prebored holes into the permafrost soils. Ultimate pile capacities, adfreeze bond, and creep properties observed were discussed. 10 figs., 4 tabs.

  11. The combustion system of the MAN 20V35/44G gas engine; Das Brennverfahren des Gasmotors 20V35/44G von MAN

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Markus; Auer, Matthias; Stiesch, Gunnar [MAN Diesel and Turbo SE, Augsburg (Germany)

    2013-04-15

    The new gas engine 20V35/44G by MAN Diesel and Turbo SE has a power output of 10.6 MW. The high effective efficiency level of 48.4 % as well as numerous technical innovations allow an environment-friendly, economical and reliable engine operation. Key to achieve this is the combustion system, which has been optimised during advanced engineering by means of modern simulation tools and extensive single-cylinder tests. (orig.)

  12. Formation and destruction mechanisms of nitrogen oxides during coal combustion in circulating fluidized beds; Mecanismes de formation et de destruction des oxydes d`azote lors de la combustion du charbon en lit fluidise circulant

    Energy Technology Data Exchange (ETDEWEB)

    Borrel, G.; Lecuyer, I. [Universite du Haut-Rhin, 68 - Mulhouse (France)

    1997-01-01

    Formation and reduction of nitrogen oxides (NO and N{sub 2}O) during coal combustion in a circulating fluidized bed (CFBC) are very complicated and yet badly known. The aim of the present study was to better characterize these phenomena on a small-sized experimental unit (reactor diameter: 5 cm), with the possibility to re-inject the solids in the bottom of the furnace, as in a real industrial unit. This should allow then to develop a numerical set of chemical reactions involving the nitrogen oxides. The experimental results showed that coal ash plays a great role in reducing nitrogen oxides, the determining parameter being the quantity of unburnt carbon remaining in the ash. The study then detailed the interaction between nitrogen oxides and de-volatilized (char) according to the temperature, NO{sub x} concentration and the mass of solid. In the absence of oxygen small quantities of char can very significantly reduce NO as well as N{sub 2}O. It was possible to establish destruction kinetics on these particles, and orders of reaction could be determined versus the NO{sub x} concentration and the char particle mass (heterogeneous phase chemical reactions). Then, the coal pyrolysis study enabled to identify the products released during coal devolatilization and thermogravimetric analyses displayed several successive weight losses due CO, CO{sub 2} and CH{sub 4} releases, during a linear temperature increase. Lastly coal combustion was studied in the small pilot with variable experimental conditions. Using the previous experimental was studied in the small pilot with variable experimental conditions. Using the previous experimental results, a model was developed to calculate NO{sub x} concentrations during the coal combustion and validated. The NO and N{sub 2}O contents calculated are thoroughly correlated with the experimental data whatever the injection carbon/oxygen ratio is. (author) 96 refs.

  13. DRIVEN POLYSTRONG REINFORCED CONCRETE PILES AND NEW DESIGN OF PILE CAPS

    Directory of Open Access Journals (Sweden)

    I. I. Bekbasarov

    2015-01-01

    Full Text Available The paper presents constructional and technological features for manufacturing driven piles with variable strength of pile shaft. Economical efficiency of their production has been shown in the paper. The paper provides a pile cap design that ensures perception of hammer impacts with the help of lateral edges of the pile cap. Driven reinforced concrete piles which are manufactured from three shaft sections having various strength have been proposed in the paper. Material strength (concrete grade and diameter of bars and length of shaft sections are given on a case by case basis in accordance with nature and rate of stresses in piles during their driving process. Manufacturing of polystrong piles provides an opportunity to select them for a particular construction site with due account of their preservation during driving process.A pile cap has been developed that as opposed to existing analogous designs makes it possible to transmit impact efforts from a hammer to the pile through lateral surface of its head part. The pile cap provides the possibility to increase an area for perception of hammer impact efforts by the pile and in doing so it is possible significantly to reduce a damage risk and destruction of pile concrete during its driving. Application of polystrong piles and their driving with the help of new pile cap are considered as a basis for defect-free and resource-saving technology for pile foundations in the construction.

  14. Pullout capacity of batter pile in sand.

    Science.gov (United States)

    Nazir, Ashraf; Nasr, Ahmed

    2013-03-01

    Many offshore structures are subjected to overturning moments due to wind load, wave pressure, and ship impacts. Also most of retaining walls are subjected to horizontal forces and bending moments, these forces are due to earth pressure. For foundations in such structures, usually a combination of vertical and batter piles is used. Little information is available in the literature about estimating the capacity of piles under uplift. In cases where these supporting piles are not vertical, the behavior under axial pullout is not well established. In order to delineate the significant variables affecting the ultimate uplift shaft resistance of batter pile in dry sand, a testing program comprising 62 pullout tests was conducted. The tests are conducted on model steel pile installed in loose, medium, and dense sand to an embedded depth ratio, L/d, vary from 7.5 to 30 and with various batter angles of 0°, 10°, 20°, and 30°. Results indicate that the pullout capacity of a batter pile constructed in dense and/or medium density sand increases with the increase of batter angle attains maximum value and then decreases, the maximum value of Pα occurs at batter angle approximately equal to 20°, and it is about 21-31% more than the vertical pile capacity, while the pullout capacity for batter pile that constructed in loose sand decreases with the increase of pile inclination. The results also indicated that the circular pile is more resistant to pullout forces than the square and rectangular pile shape. The rough model piles tested is experienced 18-75% increase in capacity compared with the smooth model piles. The suggested relations for the pullout capacity of batter pile regarding the vertical pile capacity are well predicted.

  15. Screw piles for cold climate foundations

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, R.; Sakr, M. [Almita Manufacturing Ltd., Edmonton, AB (Canada)

    2008-07-01

    Almita Manufacturing is an Alberta-based company that designs and builds screw piles with its own installation teams. It also engineers and supplies piles to numerous other companies and independent installers. The company services industries such as oil and gas; power transmission and distribution; and commercial construction. This presentation discussed the design and technical aspects of screw piles. A screw pile was defined as a steel pipe shaft with a 45 degree cut at the bottom and a formed helical plate welded to the outside of the pipe near the base and at a selected point on the shaft. The pile is screwed into the ground with a planetary drive head of suitable torque rating. The helical plate or helix helps facilitate the installation of the pile and gives the screw pile increased bearing capacity and pull-out resistance over a traditional straight-shaft pile. Screw piles were compared against cast in place concrete piles and steel driven piles. Screw piles were reported to have no tailings; no concrete curing time; no rebar, anchor belts, and no liners; and no dewatering. Screw piles can also be installed in all types of weather. Rhe Cree Burn Camp case study near Fort McMurray, Alberta was also presented. This residential camp and recreation complex consists of pre-fabricated units that make up three storey housing buildings and a single floor multi-use building. The case study provided information on soil; design parameter inputs; load testing program and pile configuration; geotechnical and structural design results; compression load test arrangement; pile test setup; and test results. The presentation also discussed fabrication as well as installation equipment. Various applications were also presented through a series of project pictures. Last, the presentation provided a simple cost analysis. tabs., figs.

  16. Pullout capacity of batter pile in sand

    Directory of Open Access Journals (Sweden)

    Ashraf Nazir

    2013-03-01

    Full Text Available Many offshore structures are subjected to overturning moments due to wind load, wave pressure, and ship impacts. Also most of retaining walls are subjected to horizontal forces and bending moments, these forces are due to earth pressure. For foundations in such structures, usually a combination of vertical and batter piles is used. Little information is available in the literature about estimating the capacity of piles under uplift. In cases where these supporting piles are not vertical, the behavior under axial pullout is not well established. In order to delineate the significant variables affecting the ultimate uplift shaft resistance of batter pile in dry sand, a testing program comprising 62 pullout tests was conducted. The tests are conducted on model steel pile installed in loose, medium, and dense sand to an embedded depth ratio, L/d, vary from 7.5 to 30 and with various batter angles of 0°, 10°, 20°, and 30°. Results indicate that the pullout capacity of a batter pile constructed in dense and/or medium density sand increases with the increase of batter angle attains maximum value and then decreases, the maximum value of Pα occurs at batter angle approximately equal to 20°, and it is about 21–31% more than the vertical pile capacity, while the pullout capacity for batter pile that constructed in loose sand decreases with the increase of pile inclination. The results also indicated that the circular pile is more resistant to pullout forces than the square and rectangular pile shape. The rough model piles tested is experienced 18–75% increase in capacity compared with the smooth model piles. The suggested relations for the pullout capacity of batter pile regarding the vertical pile capacity are well predicted.

  17. Evaluation of turbulent transport and flame surface dissipation using direct numerical simulation of turbulent combustion; Evaluation des termes de transport et de dissipation de surface de flamme par simulation numerique directe de la combustion turbulente

    Energy Technology Data Exchange (ETDEWEB)

    Boughanem, H.

    1998-03-24

    The assumption of gradient transport for the mean reaction progress variable has a limited domain of validity in premixed turbulent combustion. The existence of two turbulent transport regimes, gradient and counter-gradient, is demonstrated in the present work using Direct Numerical Simulations (DNS) of plane flame configurations. The DNS data base describes the influence of the heat release factor, of the turbulence-to-flame velocity ratio, and of an external pressure gradient. The simulations reveal a strong correlation between the regime of turbulent transport and the turbulent flame speed and turbulent flame thickness. These effects re not well described by current turbulent combustion models. A conditional approach `fresh gases / burnt gases` is proposed to overcome these difficulties. Furthermore, he development of flame instabilities in turbulent configurations is also observed in the simulations. A criterion is derived that determines the domain of occurrence of these instabilities (Darrieus- Landau instabilities, Rayleigh- Taylor instabilities, thermo-diffusive instabilities). This criterion suggests that the domain of occurrence of flame instabilities is not limited to small Reynolds numbers. (author) 98 refs.

  18. Qualification des logiciels numériques. Application à un logiciel d'analyse de la combustion dans les moteurs à allumage commandé Qualification of Numerical Software. Application to a Software for Analysing Combustion in Spark-Ignition Engines

    Directory of Open Access Journals (Sweden)

    Vignes J.

    2006-11-01

    Full Text Available La simulation numérique est actuellement très utilisée pour étudier les systèmes physiques. Elle nécessite un programme de calcul scientifique constitué d'un modèle mathématique représentatif du problème étudié et des méthodes numériques de résolution associées. Elle fournit des résultats numériques censés représenter le phénomène physique. Pour pouvoir valider la simulation, il est absolument indispensable, d'une part, d'estimer la propagation des erreurs d'arrondi due à l'arithmétique approchée des ordinateurs et, d'autre part, d'évaluer l'influence des erreurs de données sur les résultats fournis. Nous présentons, dans cet article, le logiciel CADNA qui permet de valider les logiciels numériques. Nous l'appliquons à un logiciel de simulation d'analyse de la combustion dans les moteurs à allumage commandé et en montrons son efficacité. For analyzing physical phenomena, numerical simulation is used more and more frequently. Starting with a mathematical model describing the phenomenon being analyzed, this simulation consists in creating a scientific computing program expressing this model by implementing the numerical methods required for solving it. Simulation is considered to be valid when the results its provides are in agreement with the results issuing from experimenting with the phenomenon. However, to conclude in the possible validity of the simulation, the numerical results provided by the computer must be previously validated. Yet, these results contain a computing error resulting from the propagation of round-off errors caused by the floating-point arithmetic used by the computer. They also contain an error coming from the uncertainties concerning the data of the problem. Hence it is first indispensable to assess the influence of these errors. This article is made up of two parts. The first part concerns the validation of numerical software results. After making a brief review of the floating

  19. Pile Load Capacity – Calculation Methods

    Directory of Open Access Journals (Sweden)

    Wrana Bogumił

    2015-12-01

    Full Text Available The article is a review of the current problems of the foundation pile capacity calculations. The article considers the main principles of pile capacity calculations presented in Eurocode 7 and other methods with adequate explanations. Two main methods are presented: α – method used to calculate the short-term load capacity of piles in cohesive soils and β – method used to calculate the long-term load capacity of piles in both cohesive and cohesionless soils. Moreover, methods based on cone CPTu result are presented as well as the pile capacity problem based on static tests.

  20. Neutron detection in an atomic reactor core using semi-conductors; Detection des neutrons par semi-conducteur dans un coeur de reacteur atomique

    Energy Technology Data Exchange (ETDEWEB)

    Divoux, F [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1968-07-01

    In this paper, the first part describes the principle of nuclear particle detection by means of semiconductor diodes and the general application of these. The second part describes fabrication of the device used to estimate thermic neutron fluxes in core of a swimming pool type reactor. The useful volume (2.9 mm thickness) is in the light water moderator, between combustible elements plates. The results, principally obtained in the core of Siloette reactor at the 'Centre d'Etudes Nucleaires de Grenoble' at low power, are mentioned in the third part. Flux maps have been set and comparison between converter's products: Bore 10, Lithium 6, Uranium 235 is made. (author) [French] Dans ce rapport, une premiere partie porte sur la description du principe de detection des particules nucleaires par diodes a semi-conducteur et sur l'application generale de celles-ci. Une deuxieme partie s'attache a decrire la fabrication du materiel utilise pour evaluer les flux de neutrons thermiques dans un coeur de reacteur type pile piscine. L'espace de mesure (2,9 mm d'epaisseur) se situe entre les plaques des elements combustibles, dans le moderateur eau legere. Les resultats, obtenus principalement dans le coeur du reacteur Siloette du Centre d'Etudes Nucleaires de Grenoble aux basses puissances de fonctionnement, sont rapportes dans la troisieme partie. Des cartes de flux ont ete dressees et une comparaison est faite entre les produits 'convertisseurs' suivants: Bore 10, Lithium 6, Uranium 235. (auteur)

  1. Solvent purification using a current of water vapour. A continuous process applicable to chemical plants treating irradiated fuels; Purification des solvants par entrainement a la vapeur d'eau. Procede continu applicable aux usines chimiques de traitement des combustibles irradies

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, P R; Sautray, R R; Girard, B R [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1964-07-01

    The pilot plant described in this report is intended for the continuous purification of the solvent used in the plutonium extraction plant at Marcoule, by separating the impurities (fission products). This physical separation is operated by carrying over in a water vapour stream. The contaminating products, only slightly volatile, remain in the form of the droplets and are separated; the vaporised solvent and the water vapour used are condensed and then separated. The originality of the installation resides in the system for pulverising the liquid and in the operating conditions: low working pressure and temperature. The systematic analysis of the various parameters (percentage of residue; flow, pressure and temperature ratios etc...) has shown their influence on the decontamination. The activity due to the zirconium-niobium is undetectable after treatment, and it is easy to obtain decontamination factors of 300 for the ruthenium. The, presence of uranium is favorable for the decontamination. As a conclusion, some extra-technical considerations are given concerning in particular the approximate cost price of the treated solvent per litre. (authors) [French] L'installation pilote decrite dans ce rapport est destinee a purifier, en continu, le solvant utilise a l'usine d'extraction du plutonium de Marcoule, en separant les impuretes (produits de fission). Cette separation physique est realisee par entrainement a la vapeur d'eau. Les produits contaminants, peu volatils, restant sous forme de gouttelettes, sont separes; le solvant vaporise ainsi que la vapeur d'entrainement sont condenses puis separes. L'originalite de l'installation reside dans le systeme de pulverisation du liquide et dans les conditions operatoires: faible pression et basse temperature de fonctionnement. L'analyse systematique des differents parametres (pourcentage de residus, rapport de debits, pression et temperature, etc...) a mis en evidence leur influence sur la decontamination. L'activite en

  2. Processing Th C{sub 2} - UC{sub 2} fuel extracted from high temperature reactors HTGCR; Etude du traitement des combustibles Th C{sub 2} - UC{sub 2} issus de reacteurs a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Derrien, C; Lessart, P; Pianezza, E; Verry, C; Villain, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    The object of this investigation is solubilisation head-end (from crushing and grinding phase to non included first purification phase) of pulverulent ({sup 233}U/{sup 232}Th)C{sub 2} (200 - 500 microns diameter) contained in a graphite matrix extracted from a 4.10{sup 13} n.cm{sup -2}.s{sup -1} thermalized neutrons average flux with an irradiation of 80000 MWjT{sup -1} HTGCR reactor. After having succinctly described different bibliographic processes we have chosen the burn - leach of reactor fuel and graphite matrix containing it. The technology of burner is original in nuclear field and still more by utilizing ultra-sounds to intensify burning reaction and to minimize the weight of unburnables. The mixture of ThO{sub 2}, U{sub 3}O{sub 8}, and fission products oxides is solubilized by boiling HNO{sub 3} 13 M + HF 0.05 M. This process is profit-learning in a thorium recuperation and reprocessing point of view. In the contrary-case it would be interesting to consider a dry-process which would permit to separate solid ThF{sub 4} from gaseous UF{sub 6}. (authors) [French] Cette etude a pour objet le traitement initial de mise en solution ou 'head-end' (allant de la phase broyag-concassage a la phase de premiere purification exclue) d'un combustible ({sup 233}U/{sup 232}Th)C{sub 2} pulverulent (de 200 a 500 {mu} de diametre) contenu dans une matrice de graphite issu d'un reacteur HTGCR surgenerateur a neutrons thermiques de flux moyen 4. l0{sup 13} n.cm{sup -2}.s{sup -1} et taux d'irradiation 80000 MWjT{sup -1}. Apres exposition succincte des differents procedes bibliographiques decrits, nous avons finalement choisi le traitement par combustion-attaque ('Burn-Leach') du combustible et de la matrice etanche graphite qui le contient. La technologie du bruleur est originale dans le domaine nucleaire d'autant qu'elle utilise les ultra-sons pour ameliorer le rendement de la reaction de combustion et reduire au minimum le poids des imbrules. Le melange ThO{sub 2}, U{sub 3}O

  3. Development of reduced kinetic schemes for the description of pollutants formation in combustion; Mise au point de schemas cinetiques reduits pour decrire la formation des polluants dans la combustion

    Energy Technology Data Exchange (ETDEWEB)

    Ferrendier, M.

    1998-12-17

    The typical dimensions of details chemical-kinetic mechanisms proposed to describe combustion systems are too large for multi-dimensional computations applications. The objective of reduction methods is to construct low-dimensional schemes that can be incorporated in industrial codes. We consider here a new class of methods based on a mathematical analysis of the detailed chemical-kinetic mechanisms, and the identification of a low-dimensional manifold that describes the slow dynamics of the chemical system. The mathematical reduction methods considered in this work are the Intrinsic Low Dimensional Manifold (ILDM) method proposed by Maas and Pope (1992), and the Singular Perturbation (PS) method proposed by Duchene and Rouchon (1996). The domain of validity of the ILDM or PS reduced schemes is limited to a high temperature domain T {>=} T{sub c}. This result suggests that ignition is out of the domain of application of reduced mechanisms. In the case of a CO/H{sub 2}/N{sub 2}-air combustion system, and using a two-dimensional slow manifold, we find T{sub c} {approx} 750 K. We also find that for that particular system, 2 progress variables are sufficient for an accurate description of the structure and the velocity of a laminar premixed flame. In the case of a CH{sub 4}-air combustion system, and using a two-dimensional slow manifold, we find T{sub c}{approx}1500 K. We also find that 2 progress variables are insufficient for an accurate description of the structure and the velocity of a laminar premixed flame. The study of the different NO formation mechanisms show that the thermal NO mechanism (the Zeldovich mechanism) is dominant for premixed configurations with lean or stoichiometric conditions ({phi}){>=}1.2), and for non-premixed configurations at high temperatures and high pressures (T{sub air}{>=}1000 K, P {>=} 10 bars). Under these conditions, the MPKIVA sub model used to describe NO formation in the IFP version of the KIVA code performs reasonably well. An

  4. Introduction to Single Piles under Lateral Loading

    DEFF Research Database (Denmark)

    Augustesen, Anders; Ibsen, Lars Bo

    .2). The description is based on results of laboratory tests, full-scale field tests as well as numerical investigations presented in literature. Second, general methods that attempt to model lateral pile response are discussed in section 1.4. Third, focus is paid to a widely used method for prediction of the response......The purpose of this chapter is to give a short introduction to single piles subjected to lateral loading. First, the observed behaviour of laterally loaded piles is described, i.e. the effects of loading conditions, installation procedure, pile type etc. on pile behaviour are presented (section 1...... of a lateral loaded pile, namely the Winkler approach in which the pile is modelled as an elastic beam on an elastic foundation (section 1.5). The soil response and thereby the elastic foundation is represented by springs with nonlinear behaviour (p-y curves). In section 1.6 different types and formulations...

  5. Multisignal detecting system of pile integrity testing

    Science.gov (United States)

    Liu, Zuting; Luo, Ying; Yu, Shihai

    2002-05-01

    The low strain reflection wave method plays a principal rule in the integrating detection of base piles. However, there are some deficiencies with this method. For example, there is a blind area of detection on top of the tested pile; it is difficult to recognize the defects at deep-seated parts of the pile; there is still the planar of 3D domino effect, etc. It is very difficult to solve these problems only with the single-transducer pile integrity testing system. A new multi-signal piles integrity testing system is proposed in this paper, which is able to impulse and collect signals on multiple points on top of the pile. By using the multiple superposition data processing method, the detecting system can effectively restrain the interference and elevate the precision and SNR of pile integrity testing. The system can also be applied to the evaluation of engineering structure health.

  6. Technology channel fuel cells; Reseau technologique piles a combustible

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    This document presents the PACo channel, its research and development program and the calendar of the first year. The PACo channel aims at stimulate the technology innovation in the domain of the fuel cells and organize collaborations between enterprises and research laboratories. (A.L.B.)

  7. Shutdown channels and fitted interlocks in atomic reactors; Chaines de securite et verrouillages installes sur les piles atomiques

    Energy Technology Data Exchange (ETDEWEB)

    Furet, J; Landauer, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    This catalogue consists of tables (one per reactor) giving the following information: number and type of detectors, range of the shutdown channels, nature of the associated electronics, thresholds setting off the alarms, fitted interlocks. These cards have been drawn up with a view to an examination of the reactors safety by the 'Reactor Safety Sub-Commission', they take into account the latest decisions. The reactors involved in this review are: Azur, Cabri, Castor-Pollux, Cesar-Marius-2, Edf-2, EL3, EL4, Eole, G1, G2-G3, Harmonie, Isis, Masurca, Melusine, Minerve, Osiris, Pegase, Peggy, PAT, Rapsodie, SENA, Siloe, Siloette, Triton-Nereide, and Ulysse. (authors) [French] Ce catalogue est compose d'un ensemble de tableaux (a raison de un tableau par pile) donnant les renseignements suivants: nombre et nature des detecteurs, dynamique des chaines, nature de l'electronique associee, seuils provoquant des actions de securite, verrouillages installes. Ces fiches ont ete etablies en vue de l'examen de la securite des piles par la 'Sous-Commission de Surete des Piles', et tiennent compte des decisions de celle-ci. Les reacteurs concernes sont: Azur, Cabri, Cator-Pollux, Cesar-Marius-2, Edf-2, EL3, EL4, Eole, G1, G2-G3, Harmonie, Isis, Masurca, Melusine, Minerve, Osiris, Pegase, Peggy, PAT, Rapsodie, SENA, Siloe, Siloette, Triton-Nereide, et Ulysse. (auteurs)

  8. International dosimetry experiment on the zero power pile of the Boris Kidric Institute at Vinca (Yugoslavia) (1961); Experience internationale de dosimetrie sur la pile de puissance nulle de l'Institut Boris Kidric de Vinca (Yougoslavie) (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Weill, J; Furet, J; Baillet, J; Donvez, G; Duchene, J; Gras, R; Mercier, R [Commissariat a l' Energie Atomique, Section Autonome d' Electronique des Reacteurs, Saclay (France). Centre d' Etudes Nucleaires; Chenouard, J; Lecomte, J [Commissariat a l' Energie Atomique, Dept. de Physico - Chimie, Service des Isotopes Stables, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    On the occasion of the international dosimetry experiment on the zero power pile of the Yugoslavian Atomic Energy Centre at Vinca, the Commissariat a l'energie Atomique had agreed to prepare the measurement and security equipment and see to the manipulation of the heavy water, and in addition was responsible for the operation and the starting up of the pile during the experiment. The measurement and security apparatus, developed at Saclay and installed on the pile for low and high pressure runs, is listed, together with the safety equipment added near the control room. The various operations and manipulations carried out on the pile are described: filling with heavy water, starting up, determination of the critical level, testing the efficiency of the rods, operating the pile during the experiments. By operating to a carefully planned schedule, the experiments were, finished before the date fixed by the International Atomic Agency. (authors) [French] Dans le cadre de l'experience internationale de dosimetrie sur la pile de puissance nulle du Centre d'Etudes Nucleaires Yougoslave de Vinca, le Commissariat a l'Energie Atomique avait accepte de preparer l'equipement de controle et de securite, de pourvoir a la manipulation de l'eau lourde de la pile et avait la responsabilite de son fonctionnement et de sa mise en marche pendant l'experience. On enumere ici l'appareillage de controle et de securite installe sur la pile pour les marches a basse et haute puissances, appareillage mis au point a Saclay, ainsi que les protections ajoutees a proximite de la salle de controle. On decrit les differentes manipulations et operations effectuees sur la pile: remplissage d'eau lourde, demarrage, recherche du niveau critique, verification de l'efficacite des barres, conduite de la pile pendant les experiences. Grace a un planning tres serre qui a pu etre tenu, les experiences ont pu etre terminees avant la date prevue par l'Agence Atomique Internationale. (auteurs)

  9. Analysis on pile testing results of post-grouting bored pile

    Science.gov (United States)

    Zheng, A. R.

    2017-04-01

    Based on static load test results, the bearing capacity of bored piles with pile-toe and pile-shaft post-grouting has been analyzed. The analysis reveals that: with post-grouting, the interface between pile and surrounding soil are strengthened and the relative sliding displacement in between is reduced; end resistance of pile is enhanced and can be mobilized at earlier stage with smaller sliding displacement. As a result, the performance of bored pile is improved with increased bearing capacity and reduced settlement.

  10. Static and dynamic pile testing of reinforced concrete piles with structure integrated fibre optic strain sensors

    Science.gov (United States)

    Schilder, Constanze; Kohlhoff, Harald; Hofmann, Detlef; Basedau, Frank; Habel, Wolfgang R.; Baeßler, Matthias; Niederleithinger, Ernst; Georgi, Steven; Herten, Markus

    2013-05-01

    Static and dynamic pile tests are carried out to determine the load bearing capacity and the quality of reinforced concrete piles. As part of a round robin test to evaluate dynamic load tests, structure integrated fibre optic strain sensors were used to receive more detailed information about the strains along the pile length compared to conventional measurements at the pile head. This paper shows the instrumentation of the pile with extrinsic Fabry-Perot interferometers sensors and fibre Bragg gratings sensors together with the results of the conducted static load test as well as the dynamic load tests and pile integrity tests.

  11. Pilas de combustible de membrana polimérica

    OpenAIRE

    Asensio, Juan Antonio

    2011-01-01

    En aquest treball revisem breument les piles de combustible polimèriques (PEM) basades en membranes d’intercanvi protònic i que constitueixen la tecnologia idònia de piles de combustible de baixa temperatura, i per tant les més adequades per a aplicació en transport. Revisarem els materials que les componen però també els desenvolupaments necessaris per a la seva implantació definitiva en un mercat inclement amb les tecnologies cares, per netes que siguin. En este trabajo revisamos breveme...

  12. Load Test in Sheet Pile

    OpenAIRE

    Luis Orlando Ibanez

    2016-01-01

    In this work, are discussed experiences in the use of mathematical modeling and testing in hydraulic engineering structures. For this purpose the results of load tests in sheet pile, evaluating horizontal and vertical deformations that occur in the same exposed. Comparisons between theoretical methods for calculating deformations and mathematical models based on the Finite Element Method are established. Finally, the coincidence between the numerical model and the results of the load test ful...

  13. Numerical and experimental study of the influence of the operational parameters on the formation mechanisms of oxides of nitrogen during the combustion of mixtures of cellulosic and plastic materials; Etude experimentale et numerique de l'influence des parametres operatoires sur les mecanismes de formation des oxydes d'azote lors de la combustion de melanges de materiaux cellulosiques et plastiques

    Energy Technology Data Exchange (ETDEWEB)

    Andzi Barhe, T.

    2004-10-15

    The current thesis was performed within a collaboration between the Laboratoire de Combustion et de Detonique (LCD of the University of Poitiers) and the Laboratoire de Physique et de Chimie d'Environnement (LPCE) of the University of Ouagadougou. It was financed by Agency for Environment and Energy Management (ADEME). The principle object of this study is the optimisation of the combustion process during the incineration of waste. This optimisation is aimed at the reduction of the polluting emissions, principally CO and NO, during the incineration of cellulosic and plastic materials. It involves the analysis of the influence of the operational parameters on the polluting emissions and the control of reaction mechanisms of formation and reduction of these pollutants during the combustion process. Consequently, the study was performed in two parts: an experimental part and a numerical part. The experimental part was realised using a fixed bed counterflow reactor. This setup simulates the combustion within an industrial waste incinerator. The reactor allows the combustion of a vertical layer of waste mixture (wood, cardboard, PET, polyamide) to be followed. Three model mixtures representative of the makeup of household waste were studied in order to determine the influence of the composition of the waste on the emission of pollutants (CO and NO). The obtained results show that this parameter has a practically negligible influence within the tested parameter range. Consequently the formation of pollutants depends on the operating parameters - the equivalence ratio and the temperature. A numerical study of the influence of these parameters in order to show their impact on the mechanisms of pollutant formation and to determine the chemical mechanisms involved in the formation of oxides of nitrogen. The numerical study was performed with software developed at the LCD. This programme based on a detailed chemical model coupled to a simple physical model. It uses the

  14. A Method of Identification and Inspection for Inventory Control of Irradiated Fuel Elements; Methode d'Identification et d'Inspection Permettant de Proceder a l'Inventaire des Elements Combustibles Irradies; Metod identifikatsii i proverki pri inventarnom kontrole obluchennykh toplivnykh ehlementov; Metodos de Identificacion e Inspeccion para el Control de las Existencias de Elementos Combustibles Irradiados

    Energy Technology Data Exchange (ETDEWEB)

    Kinderman, E. M.; Mills, J. S. [Stanford Research Institute, Menlo Park, CA (United States)

    1966-02-15

    The reactor discharge and irradiated fuel storage locations should be examined in any complete special nuclear materials inventory. They present, however, special physical difficulties to the auditor or inventory control manager. In these locations the distance between object and observer and the poor illumination and optical distortion caused by the shielding media (water, lead glass) contribute to the difficulties of materials inventory. In an attempt to overcome these difficulties and to provide a system for positive identification of reactor discharged fuel, we have developed a compact and convenient optical examination system utilizing a fixed examination station, a periscope, a telescope, and a camera. This system has been tested in a cobalt irradiation pool by examination of test coupons which were marked in various ways, and then treated in a hot, circulating water loop. In the test system, a water-filled periscope, 11-ft long, a catadioptric telescope placed 16 ft from the periscope, and a 35-mm camera for recording the observations were used. The telescope, camera and mountings are all readily portable since they weigh in total less than 22 lb and have maximum dimensions of 29 in. Photographic observations of test resolution charts in air 20 ft away from the object lens of the telescope have demonstrated that the system can resolve markings 22 {mu}m in width. This corresponds to a resolution of 0.8 second of arc. Tests performed on the water system have shown that resolution in this system is better than 50 {mu}m at 20 ft. This corresponds to a resolution of about 1 second of arc. It is clear that the resolution can never be better than the air path system. The present system used in an actual fuel inventory should adequately reproduce any inventory markings. (author) [French] Tout inventaire complet des matieres nucleaires speciales exige un controle au point de dechargement du reacteur et au point de stockage du combustible irradie. Or, ce controle pose

  15. 30 CFR 817.83 - Coal mine waste: Refuse piles.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Coal mine waste: Refuse piles. 817.83 Section... ACTIVITIES § 817.83 Coal mine waste: Refuse piles. Refuse piles shall meet the requirements of § 817.81, the... drainage may not be diverted over the outslope of the refuse pile. Runoff from areas above the refuse pile...

  16. Test Setup for Axially Loaded Piles in Sand

    DEFF Research Database (Denmark)

    Thomassen, Kristina

    The test setup for testing axially static and cyclic loaded piles in sand is described in the following. The purpose for the tests is to examine the tensile capacity of axially loaded piles in dense fully saturated sand. The pile dimensions are chosen to resemble full scale dimension of piles used...... in offshore pile foundations today....

  17. Static pile load tests on driven piles in Intermediate-Geo Materials : research brief.

    Science.gov (United States)

    2017-02-01

    Research Objectives: : Investigate the use of modified standard penetration tests (MSPT) : Compare field results with predictions made by the WisDOT driving formula, PDA and CAPWAP : Improve prediction of pile lengths and pile capacities ...

  18. Simulation of bearing capacity of bored piles

    Directory of Open Access Journals (Sweden)

    Majeed Ahmed

    2018-01-01

    Full Text Available This study focuses on how one can possibly predict the ultimate load for the piles that did not reach failure. This challenge was acquired through Chin- Konder method by which, the estimated settlement that correspond to failure load is well defined. Hence, this research aims to make a comparative study between the results of pile load tests carried out in Al-Basrah sewage treatment plant project, and those results induced from the numerical analysis in term of ultimate pile capacity. Consequently, it may give a clear idea on the ability of numerical simulation in getting close to the actual behavior of piles. In the current study, a numerical study using Plaxis 3D Foundation program has been performed on bored piles by the assistance of site investigations of soil. Mohr- Coulomb and linear elastic models were adopted in the simulation for soil and pile respectively. Ten bored piles were used in this analysis under different values of loading. The diameter and length of pile are 0.6m and 24m respectively. The test results indicate that, an excellent agreement has been found as a response of pile capacity between the field and numerical studies. Also, ideal load- settlement curves were created using Chin- Konder method to predict the failure load of bored piles. Also, the results have demonstrated that, the pile capacity obtained from the simulation process is larger about 51% than that design load estimated before the design of piles. This may present a priority to use the finite element method to be accounted as an effective approach in the primary analysis.

  19. Global and local scour at pile groups

    DEFF Research Database (Denmark)

    Sumer, B. Mutlu; Bundgaard, Klavs; Fredsøe, Jørgen

    2005-01-01

    This paper presents the results of an experimental investigation on scour around pile groups with different configurations exposed to steady current. Two kinds of tests were carried out: (1) Rigid-bed tests, and (2) Actual scour tests. In the former tests, the mean and turbulence properties...... of the flow were measured across the pile groups. The pile group configurations were such that the global scour was distinguished from the local scour. The results show that the global scour can be quite substantial....

  20. Pile Model Tests Using Strain Gauge Technology

    Science.gov (United States)

    Krasiński, Adam; Kusio, Tomasz

    2015-09-01

    Ordinary pile bearing capacity tests are usually carried out to determine the relationship between load and displacement of pile head. The measurement system required in such tests consists of force transducer and three or four displacement gauges. The whole system is installed at the pile head above the ground level. This approach, however, does not give us complete information about the pile-soil interaction. We can only determine the total bearing capacity of the pile, without the knowledge of its distribution into the shaft and base resistances. Much more information can be obtained by carrying out a test of instrumented pile equipped with a system for measuring the distribution of axial force along its core. In the case of pile model tests the use of such measurement is difficult due to small scale of the model. To find a suitable solution for axial force measurement, which could be applied to small scale model piles, we had to take into account the following requirements: - a linear and stable relationship between measured and physical values, - the force measurement accuracy of about 0.1 kN, - the range of measured forces up to 30 kN, - resistance of measuring gauges against aggressive counteraction of concrete mortar and against moisture, - insensitivity to pile bending, - economical factor. These requirements can be fulfilled by strain gauge sensors if an appropriate methodology is used for test preparation (Hoffmann [1]). In this paper, we focus on some aspects of the application of strain gauge sensors for model pile tests. The efficiency of the method is proved on the examples of static load tests carried out on SDP model piles acting as single piles and in a group.

  1. Global and local scour at pile groups

    DEFF Research Database (Denmark)

    Sumer, B. Mutlu; Bundgaard, Klavs; Fredsøe, Jørgen

    2005-01-01

    This paper presents the results of an experimental investigation on scour around pile groups with different configurations exposed to steady current. Two kinds of tests were carried out: rigid-bed tests and actual scour tests. In these, the mean and turbulence properties of the flow were measured...... across the pile groups. The pile-group configurations were such that the global scour was distinguished from the local scour. The results show that the global scour can be quite substantial....

  2. Extraction apparatus used in the treatment of irradiated fuels; Les appareils d'extraction utilises dans le traitement des combustibles irradies

    Energy Technology Data Exchange (ETDEWEB)

    Faugeras, P; Talmont, X [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The two qualities necessary in an extractor in the case of solvent extraction of radioactive materials are that they should occupy little space and require little maintenance. In this paper various types of apparatus designed to this effect are examined: firstly mixer-decanter types with mechanical shaking and with shaking and decantation ultrasonically accelerated; then pulsed columns; finally hydro-cyclones. The chemical engineering studies peculiar to the running, supply and control of each of these extractors are described in detail. In certain cases some results obtained on radioactive solutions on a pilot scale are given. (author) [French] Faible encombrement, peu d'entretien, telles sont les deux qualites qu'un extracteur doit posseder dans le cas d'extraction par solvant de matieres radioactives. Dans ce texte seront examines differents types d'appareils concus dans cet esprit: d'abord les appareils typez melangeurs-decanteurs a agitation mecanique, a agitation et decantation accelerees aux ultra-sons; puis les colonnes pulsees; enfin les hydrocyclones. Pour chacun de ces extracteurs seront detaillees les etudes de genie chimique propres a son fonctionnement, a son alimentation, a son controle. Pour certains seront notes quelques resultats obtenus sur des solutions radioactives a l'echelle pilote. (auteur)

  3. The Windscale piles initial decommissioning programme

    International Nuclear Information System (INIS)

    Boorman, T.; Woodacre, A.

    1992-01-01

    The two Windscale Piles, the first large scale nuclear reactors built in the UK were constructed in the late 1940's and operated until the accident in Pile No 1 caused their permanent shutdown in 1957. Following a period of care and maintenance, a programme of initial decommissioning has begun aimed at establishing a satisfactory long-term safe condition for the Windscale Piles Complex with minimum maintenance commitments. For the chimneys this involves the removal of the top filter sections. The pond will be emptied and cleaned. For the Piles the initial phase includes the consideration of options for long-term decommissioning solutions. (author)

  4. Underwater Sound Propagation from Marine Pile Driving.

    Science.gov (United States)

    Reyff, James A

    2016-01-01

    Pile driving occurs in a variety of nearshore environments that typically have very shallow-water depths. The propagation of pile-driving sound in water is complex, where sound is directly radiated from the pile as well as through the ground substrate. Piles driven in the ground near water bodies can produce considerable underwater sound energy. This paper presents examples of sound propagation through shallow-water environments. Some of these examples illustrate the substantial variation in sound amplitude over time that can be critical to understand when computing an acoustic-based safety zone for aquatic species.

  5. Safety precautions in atomic pile control (1962)

    International Nuclear Information System (INIS)

    Furet, J.

    1962-01-01

    We have been led to study the problem of safety in atomic pile control as a result of our participation on the one hand in the planning of C.E.A. atomic piles, and on the other hand in the pile safety sub omission considering atomic pile safety of operational or planned C.E.A. piles. We have thus had to consider the wishes occurring in piles during their operation and also their behaviour in the dynamic state The present work deals mainly with the importance of intrinsic safety devices, with the influence of reactivity variations on the power fluctuations during accidental operation, and with the development of robust and reliable safety appliances. The starting p accident has been especially studied both for low-flux piles where a compromise is necessary between the response time of the safety appliances and the statistical fluctuations and for high lux piles where xenon poisoning has an effect on the lower limit of the velocity of reactivity liberation. The desirability has been stressed of automation as a safety factor in atomic pile control. The details required for an understanding of the diagrams of the apparatus are given. (author) [fr

  6. Simplified analysis of laterally loaded pile groups

    Directory of Open Access Journals (Sweden)

    F.M. Abdrabbo

    2012-06-01

    Full Text Available The response of laterally loaded pile groups is a complicated soil–structure interaction problem. Although fairly reliable methods are developed to predicate the lateral behavior of single piles, the lateral response of pile groups has attracted less attention due to the required high cost and complication implication. This study presents a simplified method to analyze laterally loaded pile groups. The proposed method implements p-multiplier factors in combination with the horizontal modulus of subgrade reaction. Shadowing effects in closely spaced piles in a group were taken into consideration. It is proven that laterally loaded piles embedded in sand can be analyzed within the working load range assuming a linear relationship between lateral load and lateral displacement. The proposed method estimates the distribution of lateral loads among piles in a pile group and predicts the safe design lateral load of a pile group. The benefit of the proposed method is in its simplicity for the preliminary design stage with a little computational effort.

  7. Presentation of the health impact evaluation study of atmospheric emissions of a major coal combustion installation; Mise a jour de l'etude d'evaluation de l'impact sur la sante des rejets atmospheriques des tranches charbon d'une grande installation de combustion

    Energy Technology Data Exchange (ETDEWEB)

    Bonnard, R

    2004-12-15

    In the framework of a working group on the major installations, a study has been realized on a today coal combustion installation. The direct risk by inhalation and the risks bond to indirect exposure of atmospheric releases were analyzed. The calculation method is explained and the uncertainties are discussed to present the results. (A.L.B.)

  8. Static pile load tests on driven piles into Intermediate-Geo Materials.

    Science.gov (United States)

    2016-09-01

    The Wisconsin Department of Transportation (WisDOT) has concerns with both predicting pile lengths and pile capacities for H-piles driven into Intermediate-Geo Materials (IGM). The goal of the research was to perform 7 static axial load tests at 7 lo...

  9. Use of pile driving analysis for assessment of axial load capacity of piles : [technical summary].

    Science.gov (United States)

    2012-01-01

    The dynamic response of a pile during driving is very : complex, involving the interactions of the hammer, cushion, : pile and soil during application of an impact load. : The first analysis aimed at simulating a hammer blow on : a pile was published...

  10. Temperature measurement in French atomic piles; La mesure des temperatures dans les piles atomiques francaises

    Energy Technology Data Exchange (ETDEWEB)

    Weill, J; Rastoix, G

    1950-10-01

    In the Chatillon reactor the temperature is measured (1) in the interior of one of the vertical A1 cylinders filled with UO{sub 2} (temperature interval 20 to 70 deg. C), and (2) in the center of the tank containing D{sub 2}O (20 to 50 deg. C). The instruments used are silver-constantan thermocouples; the wires are insulated by SiO{sub 2} sheaths, those immersed in D{sub 2}O being placed within Al cases 10 mm diameter. In the Saclay reactor the temperature is taken (1) in the interior of 4 U rods (20 to 300 deg. C), (2) at 2 points of the D{sub 2}O mass (20 to 60 deg. C), (3) at one point in graphite (20 to 100 deg. C), and (4) at 5 points in the catalytic setup (200 deg. C). Copper-constantan couples are used (Ag-constantan is not suitable above 150 deg. C); the wires are enclosed in a sheath of glass fabric. In both reactors the accuracy of the temperature measurements is 0.5 deg. C. (author)

  11. Study of the light emitted in the moderation of a heavy-water pile; Etude de la lumiere emise dans le moderateur d'une pile a eau lourde

    Energy Technology Data Exchange (ETDEWEB)

    Breton, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-06-15

    During the running of a reactor which uses water as a neutron moderator, a bluish light is seen to appear inside the liquid. A detailed study of this radiation, undertaken on the Fontenay-aux-Roses pile, has shown that the spectrum is identical with that which characterises the light produced by the Cerenkov effect. The light intensity as a function of the pile power grows exponentially as a function of time when the pile diverges, with a lifetime equal to that of the rise in power. An examination of the various particles present in the pile has led to the conclusion that only electrons with an energy greater than 260 keV con produce the Cerenkov light. The light source thus produced is about 2.10{sup 6} photons/cm{sup 2} of water, when the pile power equals 1 watt. (author) [French] Lors du fonctionnement d'un reacteur utilisant l'eau comme moderateur de neutrons, on constate l'apparition d'une lumiere bleutee au sein du liquide. Une etude approfondie de ce rayonnement, entreprise sur la pile Fontenay-aux-Roses a montre que le spectre est identique a celui caracterisant la lumiere produite par effet Cerenkov. L'intensite lumineuse en fonction de Ia puissance de la pile, lors d'une divergence croit exponentiellement en fonction du temps avec une periode egale a celle de la montee en puissance. L'examen des diverses particules presentes dans la pile a permis de conclure que seuls les electrons ayant une energie superieure a 260 keV peuvent produire la lumiere Cerenkov. La source lumineuse ainsi constituee est d'environ 2.10{sup 6} photons/cm{sup 2} d'eau, lorsque la puissance de la pile est egale a 1 watt. (auteur)

  12. Study of the light emitted in the moderation of a heavy-water pile; Etude de la lumiere emise dans le moderateur d'une pile a eau lourde

    Energy Technology Data Exchange (ETDEWEB)

    Breton, D. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-06-15

    During the running of a reactor which uses water as a neutron moderator, a bluish light is seen to appear inside the liquid. A detailed study of this radiation, undertaken on the Fontenay-aux-Roses pile, has shown that the spectrum is identical with that which characterises the light produced by the Cerenkov effect. The light intensity as a function of the pile power grows exponentially as a function of time when the pile diverges, with a lifetime equal to that of the rise in power. An examination of the various particles present in the pile has led to the conclusion that only electrons with an energy greater than 260 keV con produce the Cerenkov light. The light source thus produced is about 2.10{sup 6} photons/cm{sup 2} of water, when the pile power equals 1 watt. (author) [French] Lors du fonctionnement d'un reacteur utilisant l'eau comme moderateur de neutrons, on constate l'apparition d'une lumiere bleutee au sein du liquide. Une etude approfondie de ce rayonnement, entreprise sur la pile Fontenay-aux-Roses a montre que le spectre est identique a celui caracterisant la lumiere produite par effet Cerenkov. L'intensite lumineuse en fonction de Ia puissance de la pile, lors d'une divergence croit exponentiellement en fonction du temps avec une periode egale a celle de la montee en puissance. L'examen des diverses particules presentes dans la pile a permis de conclure que seuls les electrons ayant une energie superieure a 260 keV peuvent produire la lumiere Cerenkov. La source lumineuse ainsi constituee est d'environ 2.10{sup 6} photons/cm{sup 2} d'eau, lorsque la puissance de la pile est egale a 1 watt. (auteur)

  13. Analytic studies on pollutant deposition through domestic coal combustion - influence of the current structural change on pollution in an urban region. Final report; Analytische Untersuchungen zum Schadstoffeintrag durch den Hausbrand - Auswirkungen des gegenwaertigen Strukturwandels auf die urbane Belastungssituation. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Engewald, W.; Knobloch, T.; Asperger, A.

    1996-12-31

    In the present paper the author reports on the continuation of an OEKOR part project in which he had undertaken a chemical characterisation of emissions from domestic brown coal combustion. On the basis of a partitioning by land use of the Greater Leipzig region he initiated long-term observations of local pollution levels for the various structural types of land. The aim of the work was to facilitate a comprehensive analysis of local air quality in terms of VOC levels. The current concern about VOCs results from the toxicological risk they have been proven to pose to the human organism and from their relevance to the chemistry of the atmosphere (e.g., as precursors of ground-level ozone and other oxidising agents). The task to be accomplished was broken down into the following main steps: Development and trial of a sampling and analysis method for determining an as wide a spectrum of environmental VOCs as possible; elaboration of a measuring strategy for obtaining results of high representativeness and power; installation and operation of pollution monitoring sites in selected structural types of area characteristic of Leipzig; execution of measuring campaigns of several weeks each at selected sites during both winter and summer periods. (orig./MSK) [Deutsch] In Fortsetzung eines vom Berichterstatter bearbeiteten OeKOR-Teilprojekts zur chemischen Charakterisierung von Emissionen aus dem Hausbrand von Braunkohle galt es, auf der Basis einer an der Flaechennutzung ausgerichteten Untergliederung der Stadtregion Leipzig in unterschiedliche Strukturtypen langfristige Immissionsbeobachtungen zu beginnen mit dem Ziel, eine Zustandsanalyse des Umweltmediums Luft bezueglich des Gehalts an fluechtigen organischen Verbindungen (VOC) in ihrer gesamten Breite zu ermoeglichen. Das verstaerkte Interesse an diesen Verbindungen resultiert aus dem fuer eine Reihe von VOC belegten toxikologischen Gefahrenpotential fuer den menschlichen Organismus sowie ihrer atmosphaerenchemischen

  14. Prediction of pile set-up for Ohio soils.

    Science.gov (United States)

    2011-02-01

    ODOT typically uses small diameter driven pipe piles for bridge foundations. When a pile is driven into the subsurface, it disturbs and displaces the soil. As the soil surrounding the pile recovers from the installation disturbance, a time dependant ...

  15. Design phase identification of high pile rebound soils : final report

    Science.gov (United States)

    2010-12-15

    An engineering problem has occurred when installing displacement piles in certain soils. During driving, piles are rebounding excessively during each hammer blow, causing delay and as a result may not achieve the required design capacities. Piles dri...

  16. Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles

    Science.gov (United States)

    Seyedehsan Hosseini; Qi Li; Manish Shrivastava; David R. Weise; David R. Cocker; J. Wayne Miller; Heejung S Jung

    2014-01-01

    Low-density polyethylene (LDPE) plastic is used to keep piled debris from silvicultural activities—activities associated with development and care of forests—dry to enable efficient disposal by burning. The effects of inclusion of LDPE in this manner on smoke emissions are not well known. In a combustion laboratory experiment, 2-kg mixtures of LDPE and manzanita (

  17. In-pile Instrumentation Development

    International Nuclear Information System (INIS)

    Vermeeren, L.

    2005-01-01

    Advanced irradiations in research reactors require the on-line monitoring of crucial parameters like neutron fluxes, gamma dose rates, central fuel rod temperatures, fission gas release pressures and small geometry changes. Our activities in this field aim at a detailed understanding of the sensor behaviour in the irradiation conditions in order to extract reliable real-time information. The objectives of work performed by SCK-CEN are to study of the on-line in-pile measurement of gamma and neutron fluxes in real time and to investigate parasitic radiation-induced signals in instrumentation cables

  18. Oxidation and Reduction of Iron-Titanium Oxides in Chemical Looping Combustion: A Phase-Chemical Description Oxydation et réduction des minerais de fer-titane dans la combustion en boucle chimique

    Directory of Open Access Journals (Sweden)

    den Hoed P.

    2011-05-01

    Full Text Available Ilmenite (FeTiO3 is being explored as an oxygen carrier in chemical looping processes. Its reduction and oxidation are described by the system Fe-Fe2O3-TiO2-Ti2O3. The phase diagram at 1 000°C, presented here, offers a useful tool for predicting reactions and their products. We see that Fe2TiO5 (pseudobrookite and TiO2 (rutile form a stable phase assemblage following the oxidation of FeTiO3 (ilmenite in air. The subsequent reduction of Fe2TiO5 at oxygen partial pressures of 10-15.5atm stabilizes Fe1.02Ti0.98O3, a solid solution of ilmenite. Further reduction will produce metallic iron, which compromises the integrity of the oxygen carrier for chemical looping processes. We speculate that the reduction of Fe-Ti oxides in several practical instances does not reach completion (and equilibrium under the imposed atmospheres operating in fuel reactors. L’ilménite (FeTiO3 est considéré comme un transporteur d’oxygène potentiel pour les procédés en boucle chimique. Ses mécanismes de réduction et d’oxydation sont décrits à travers le système Fe-Fe2O3-TiO2-TiO3. Le diagramme de phase à 1 000°C, présenté ici, est un outil utile pour prédire les réactions et les produits. Nous constatons que Fe2TiO5 (pseudobrookite et TiO2 (rutile forment un assemblage de phase stable après oxydation de l’ilménite (FeTiO3 dans l’air. La réduction subséquente de Fe2TiO5 à la pression partielle de 10−15,5atm stabilise vers Fe1.02Ti0.98O3, une solution solide d’ilménite. Une réduction plus poussée va produire du fer métallique et compromettre l’intégrité du transporteur d’oxygène dans la boucle chimique. Il est probable que la réduction des oxydes Fe-Ti ne soit pas, en pratique, complète et n’atteigne pas l’équilibre dans les conditions rencontrées en opération dans les réacteurs de réduction.

  19. First experiments results about the engineering model of Rapsodie; Premiers resultats d'essais interessant le bloc pile de rapsodie

    Energy Technology Data Exchange (ETDEWEB)

    Chalot, A; Ginier, R; Sauvage, M [Association Euratom-CEA Cadarache (France). Centre d' Etudes Nucleaires

    1964-07-01

    This report deals with the first series of experiments carried out on the engineering model of Rapsodie and on an associated sodium facility set in a laboratory hall of Cadarache. It conveys more precisely: 1/ - The difficulties encountered during the erection and assembly of the engineering model and a compilation of the results of the first series of experiments and tests carried out on this installation (loading of the subassemblies preheating, thermal chocks...). 2/ - The experiments and tests carried out on the two prototypes control rod drive mechanisms which brought to the choice for the design of the definitive drive mechanism. As a whole, the results proved the validity of the general design principles adopted for Rapsodie. (authors) [French] Ce rapport traite des premiers essais realises sur la maquette du bloc pile de Rapsodie et sur une installation annexe de sodium, implantees dans un hall d'essais de Cadarache. Il fait part: 1/- Des difficultes eprouvees lors du montage de la maquette et rassemble les resultats des premiers essais effectues sur cette installation (chargement des assemblages, prechauffage, chocs thermiques...). 2/- Des essais realises sur deux prototypes de mecanisme de barre de controle qui ont conduit a la conception du mecanisme definitif. L'ensemble des resultats obtenus a permis de confirmer la validite des principes adoptes pour la pile Rapsodie. (auteurs)

  20. The Role of Attrition and Solids Recovery in a Chemical Looping Combustion Process Effet de l’attrition et de la récupération des particules dans le procédé de combustion en boucle chimique

    Directory of Open Access Journals (Sweden)

    Kramp M.

    2011-05-01

    Full Text Available In the present work, the steady-state behavior of a Chemical Looping Combustion process of interconnected fluidized bed reactors is simulated. The simulations have been carried out in two different scales, 50 kWth and 100 MWth. Attrition model derived from small scale laboratory experiments has been employed for the prediction of the process behavior in terms of attrition and Oxygen Carrier loss. Information on Oxygen Carrier characteristics and reaction kinetics were taken from literature. Realistic circulation mass flows of Oxygen Carrier particles are obtained and Oxygen Carrier losses are quantified. The large scale process looses significantly more Oxygen Carrier than the small scale process based on the same amount of thermal energy produced. Incomplete conversion in the air reactor could be identified as a critical point. Another issue is the fuel gas bypassing the Oxygen Carrier particles through bubbles in the large scale process which leads to lowered fuel conversions. The simulations indicate that a similar performance of a pilot scale and a large scale process is not guaranteed due to the scale-up effect on fluid dynamics. Furthermore, the simulations allow an assessment of the influence of the quality of the solids recovery system on the Oxygen Carrier loss. The distribution of the losses between possible origins is investigated and different changes in the solids recovery system are discussed regarding their potential to decrease the Oxygen Carrier loss. For example, the addition of a second-stage cyclone after the air reactor of the large scale process reduces the Oxygen Carrier loss significantly. Le présent travail propose un modèle de simulation en continu du procédé de combustion en boucle chimique constitué de deux lits fluidisés interconnectés. Les simulations ont été conduites à deux échelles 50 kWth correspondant à une installation pilote et 100 MWth correspondant à une installation industrielle. Un modèle d

  1. Combustion engineering

    CERN Document Server

    Ragland, Kenneth W

    2011-01-01

    Introduction to Combustion Engineering The Nature of Combustion Combustion Emissions Global Climate Change Sustainability World Energy Production Structure of the Book   Section I: Basic Concepts Fuels Gaseous Fuels Liquid Fuels Solid Fuels Problems Thermodynamics of Combustion Review of First Law Concepts Properties of Mixtures Combustion StoichiometryChemical EnergyChemical EquilibriumAdiabatic Flame TemperatureChemical Kinetics of CombustionElementary ReactionsChain ReactionsGlobal ReactionsNitric Oxide KineticsReactions at a Solid SurfaceProblemsReferences  Section II: Combustion of Gaseous and Vaporized FuelsFlamesLaminar Premixed FlamesLaminar Flame TheoryTurbulent Premixed FlamesExplosion LimitsDiffusion FlamesGas-Fired Furnaces and BoilersEnergy Balance and EfficiencyFuel SubstitutionResidential Gas BurnersIndustrial Gas BurnersUtility Gas BurnersLow Swirl Gas BurnersPremixed-Charge Engine CombustionIntroduction to the Spark Ignition EngineEngine EfficiencyOne-Zone Model of Combustion in a Piston-...

  2. Study of the multiplication factor in the core of Saclay; Etude du facteur de multiplication dans la pile de Saclay

    Energy Technology Data Exchange (ETDEWEB)

    Jacrot, B; Netter, F; Raievski, V [Commissariat a l' Energie Atomique, Saclay(France). Centre d' Etudes Nucleaires

    1953-07-01

    Several methods were studied for the measure of the multiplication factor strength in a core, by experiences in subcritical regime. These methods are applied to the determination of the effect on the reactivity of such different parameters of the battery that: heavy water level, position of the regulating plates. These results are used to establish an experimental relation between the time of the rise of the divergent core and the factor of effective multiplication. It is also given the application of these methods to the assessment of the power of the core. (author) [French] Des methodes ont ete etudie pour la mesure du facteur de multiplication effectif dans une pile, par des experiences en regime sous-critique. Ces methodes sont appliquees a la determination de l'effet sur la reactivite de differents parametres de la pile tels que: niveau d'eau lourde, position des plaques de reglage. Ces resultats sont utilises pour etablir une relation experimentale entre le temps de la montee de la pile divergente et le facteur de multiplication effectif. On donne egalement l'application de ces methodes a l'evaluation de la puissance de la pile. (auteur)

  3. Some Remarks on Foundation Pile Testing Procedures

    Science.gov (United States)

    Rybak, Jarosław

    2017-10-01

    This work presents the review of pile capacity testing techniques. In an overview, the key points in pile designing are: determination of the appropriate computational schemes, reliable data on loads and the properties of structural materials (in particular, of the soil mass, which is marked by the greatest variability). The procedure of constructing a pile foundation should include: carrying out soil tests in the scope that ensures safe designing, selecting a piling technology that is relevant both to geotechnical conditions and expected loads, drafting a piling design together with the design of load tests, setting up a testing station for further load tests, static and/or dynamic tests of pile load capacity, preceded by supplementary soil tests when the conditions of test pile installation fail to comply with the design assumptions or when the pile length exceeds the depth of the previously investigated soil, making documentation of load capacity tests (with an additional correction of the piling design), the actual piling (ongoing analysis of pile driving logs and, if necessary, testing the piles’ integrity), drawing up the as-built documentation. Unfortunately, the design is corrected after the load test have been conducted only if the piles fail to show the designed bearing capacity. The designer is then obliged to revise the design assumptions on the basis of tests results. If the test results account for the a greater bearing capacity than necessary and it would be recommendable to limit the extent of the planned (i.e. set out in the contract) piling works, usually neither the contractor nor the designer, nor even the Construction Site Supervisor, acting for the benefit of the Investor, are willing to take on the responsibility for reducing the scope of the piling works. The necessity of conducting additional control tests before and during the implementation of the construction project is often treated by the investors as an attempt at extorting extra

  4. Report by the AERES on the unit: Fuel Study Department (DEC) under the supervision of the establishments and bodies: Atomic Energy and Alternative Energies Commission (CEA); Rapport de l'AERES sur l'unite: Departement d'Etudes des Combustibles (DEC) sous tutelle des etablissements et organismes: Commissariat a l'Energie Atomique et aux Energies Alternatives (CEA)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-03-15

    This report is a kind of audit report on a research laboratory, the DEC (Departement d'Etudes des Combustibles, Fuel Study Department) which comprises four departments: a department of analysis and characterization of fuel behaviour (SA3C) which comprises four laboratories, a Plutonium, Uranium and Minor Actinides department (SPUA) which comprises four laboratories, a department for the investigation and simulation of fuel behaviour (four laboratories) and the Leca-Star department (3 laboratories and a project group). The authors discuss an assessment of the whole unit activities in terms of strengths and opportunities, aspects to be improved, risks and recommendations, productions and publications on different themes (fundamental research on fuels, fuel design, fabrications, characterizations and property measurements, experimental irradiations, characterization of irradiated fuels and chemical and radio-chemical analysis, modelling and simulation). A more detailed assessment is presented for each theme in terms of scientific quality, influence and attractiveness (awards, recruitment capacity, capacity to obtain financing and to tender, participation to international programs), strategy and governance, and project

  5. Predicting moisture and economic value of solid forest fuel piles for improving the profitability of bioenergy use

    Science.gov (United States)

    Lauren, Ari; Kinnunen, Jyrki-Pekko; Sikanen, Lauri

    2016-04-01

    Bioenergy contributes 26 % of the total energy use in Finland, and 60 % of this is provided by solid forest fuel consisting of small stems and logging residues such as tops, branches, roots and stumps. Typically the logging residues are stored as piles on site before transporting to regional combined heat and power plants for combustion. Profitability of forest fuel use depends on smart control of the feedstock. Fuel moisture, dry matter loss, and the rate of interest during the storing are the key variables affecting the economic value of the fuel. The value increases with drying, but decreases with wetting, dry matter loss and positive rate of interest. We compiled a simple simulation model computing the moisture change, dry matter loss, transportation costs and present value of feedstock piles. The model was used to predict the time of the maximum value of the stock, and to compose feedstock allocation strategies under the question: how should we choose the piles and the combustion time so that total energy yield and the economic value of the energy production is maximized? The question was assessed concerning the demand of the energy plant. The model parameterization was based on field scale studies. The initial moisture, and the rates of daily moisture change and dry matter loss in the feedstock piles depended on the day of the year according to empirical field measurements. Time step of the computation was one day. Effects of pile use timing on the total energy yield and profitability was studied using combinatorial optimization. Results show that the storing increases the pile maximum value if the natural drying onsets soon after the harvesting; otherwise dry matter loss and the capital cost of the storing overcome the benefits gained by drying. Optimized timing of the pile use can improve slightly the profitability, based on the increased total energy yield and because the energy unit based transportation costs decrease when water content in the biomass is

  6. Analysis of effect of different construction methods of piles on the end effect on skin friction of piles

    Institute of Scientific and Technical Information of China (English)

    ZHOU Hongbo; CHEN Zhuchang

    2007-01-01

    Based on the comparative analysis of end effect on skin friction of displacement-pile (driven pile),the end effect on skin friction of bored pile is studied.The end effect on skin friction between driven pile and bored pile is different and the end effect on skin friction of bored pile is reduce of skin friction in the soil layer adjacent to the pile end.The degradation degree of skin friction is deduced with the increase of the distance from pile end.The concept of additional mud cake formed by the effect of cushion at the bottom of borehole during pouring concrete is introduced to explain the mechanism of end effect on skin friction of the bored pile.The test results of post-grouting piles indicate that the post-grouting technique is an effective way to improve the end effect on skin friction of bored pile.

  7. Reliability of Estimation Pile Load Capacity Methods

    Directory of Open Access Journals (Sweden)

    Yudhi Lastiasih

    2014-04-01

    Full Text Available None of numerous previous methods for predicting pile capacity is known how accurate any of them are when compared with the actual ultimate capacity of piles tested to failure. The author’s of the present paper have conducted such an analysis, based on 130 data sets of field loading tests. Out of these 130 data sets, only 44 could be analysed, of which 15 were conducted until the piles actually reached failure. The pile prediction methods used were: Brinch Hansen’s method (1963, Chin’s method (1970, Decourt’s Extrapolation Method (1999, Mazurkiewicz’s method (1972, Van der Veen’s method (1953, and the Quadratic Hyperbolic Method proposed by Lastiasih et al. (2012. It was obtained that all the above methods were sufficiently reliable when applied to data from pile loading tests that loaded to reach failure. However, when applied to data from pile loading tests that loaded without reaching failure, the methods that yielded lower values for correction factor N are more recommended. Finally, the empirical method of Reese and O’Neill (1988 was found to be reliable enough to be used to estimate the Qult of a pile foundation based on soil data only.

  8. Radioprotection problems resulting from the presence of experimental devices around an atomic reactor; Problemes de radioprotection poses par l'implantation de dispositifs experimentaux aupres d'une pile atomique

    Energy Technology Data Exchange (ETDEWEB)

    Fitoussi, L; Lebouleux, Ph; Bricard, Ph; Moreau, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The setting up of experimental devices around a reactor produces dangers of irradiation and radioactive contamination which can become very great in the case of an accident, especially if the in-pile portion contains fissile matter. This may result in irradiation of personnel, prohibition of access to the experimental zones until the sources of irradiation and contamination have been eliminated, and a prolonged stoppage of the reactor. The plans for an in-pile experiment should take into account radioprotection factors; the aim of these is to reduce to a minimum the radioactive risks normally encountered during the experiment and to eliminate any risks of bad accidents and their consequences. In this report are classified the various types of experiments requiring installations outside the pile itself; for each of these experiments the particular radioprotection factors are given. In order to make possible a study of the radioactive dangers likely to arise during a projected experiment, the authors summarize the physical and technical data required by radioprotection specialists and give the rules and general advice concerning radioprotection which should be useful during the planning of an in-pile experiment and the setting-up of the equipment. (authors) [French] L'implantation de dispositifs experimentaux aupres des reacteurs cree des risques d'irradiation et de contamination radioactive qui peuvent devenir importants en cas d'accident, surtout si la partie en pile comprend des matieres fissiles. Il peut en resulter des irradiations de personne, l'interdiction des aires experimentales jusqu'a elimination des sources d'irradiation et de contamination, un arret prolonge de la pile. L'etude d'un projet d'experience en pile doit donc tenir compte des considerations de radioprotection dont le souci est de reduire aux niveaux tolerables les risques radioactifs inherents au fonctionnement normal de l'experience et d'eliminer les risques d'accidents graves et leurs

  9. 30 CFR 77.214 - Refuse piles; general.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Refuse piles; general. 77.214 Section 77.214... Installations § 77.214 Refuse piles; general. (a) Refuse piles constructed on or after July 1, 1971, shall be..., tipples, or other surface installations and such piles shall not be located over abandoned openings or...

  10. 30 CFR 816.83 - Coal mine waste: Refuse piles.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Coal mine waste: Refuse piles. 816.83 Section... ACTIVITIES § 816.83 Coal mine waste: Refuse piles. Refuse piles shall meet the requirements of § 816.81, the... drainage may not be diverted over the outslope of the refuse piles. Runoff from the areas above the refuse...

  11. 30 CFR 77.215-4 - Refuse piles; abandonment.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Refuse piles; abandonment. 77.215-4 Section 77... MINES Surface Installations § 77.215-4 Refuse piles; abandonment. When a refuse pile is to be abandoned... refuse pile shall be abandoned in accordance with a plan submitted by the operator and approved by the...

  12. Measurements of pile driving noise from control piles and noise-reduced piles at the Vashon Island ferry dock.

    Science.gov (United States)

    2017-04-01

    As part of the Washington State Department of Transportation (WSDOT) pile attenuation test program, : researchers from the University of Washington Applied Physics Laboratory (APL-UW) conducted underwater sound : measurements on 7 and 8 December 2015...

  13. Soil heating during burning of forest slash piles and wood piles

    Science.gov (United States)

    Matt D. Busse; Carol J. Shestak; Ken R. Hubbert

    2013-01-01

    Pile burning of conifer slash is a common fuel reduction practice in forests of the western United States that has a direct, yet poorly quantified effect on soil heating. To address this knowledge gap, we measured the heat pulse beneath hand-built piles ranging widely in fuel composition and pile size in sandy-textured soils of the Lake Tahoe Basin. The soil heat pulse...

  14. Introduction of effective piles in a base structure

    Directory of Open Access Journals (Sweden)

    В.Б. Кашка

    2005-03-01

    Full Text Available  Design features of effective piles such as СВ and their advantages in use are considered at the device of the pile bases in comparison with widely widespread types of piles. From results of comparative tests of piles under static pressing loading in different earth conditions the tendency of redistribution of bearing (carrying ability between a trunk and expansions an effective pile such as СВ was determined on earth conditions.

  15. Performance of pile supported sign structures : [brief].

    Science.gov (United States)

    2015-05-01

    Sign structures in Wisconsin are typically supported by drilled shaft foundations or spread : footing foundations. However, when the soil conditions are not suitable to be supported on : drilled shafts or spread footings, a group of piles could suppo...

  16. New trends in pile safety instrumentation

    International Nuclear Information System (INIS)

    Furet, J.

    1961-01-01

    This report addresses the protection of nuclear piles against damages due to operation incidents. The author discusses the current trends in the philosophy of safety of atomic power piles, identifies the parameters which define safety systems, presents tests to be performed on safety chains, comments the relationship between safety and the decrease of the number of pile inadvertent shutdowns, discusses the issues of instrument failures and chain multiplicity, comments the possible improvement of the operation of elements which build up safety chains (design simplification, development of semiconductors, replacement of electromechanical relays by static relays), the role of safety logical computers and the development of automatics in pile safety, presents automatic control as a safety factor (example of automatic start-up), and finally comments the use of fuses

  17. Displacement pile installation effects in sand

    NARCIS (Netherlands)

    Beijer-Lundberg, A.

    2015-01-01

    Installation effects govern the post-installation behaviour of displacement piles in sand. These effects are currently not completely understood. Suitable experimental techniques to model these installation effects include field, laboratory and experimental models. In the current thesis a

  18. Le tassement des appuis du Pont de Normandie

    OpenAIRE

    COMBARIEU, O

    2003-01-01

    Le Pont de Normandie, ouvrage haubané franchissant l'estuaire de la Seine, fait l'objet depuis le début de sa construction d'un suivi géométrique très précis. En particulier, les appuis des deux pylônes principaux, des deux culées et des vingt-six piles des viaducs d'accès sont régulièrement nivelés. Après un descriptif géotechnique du site, la manière dont l'étude des tassements des appuis sur pieux a été abordée, implicitement ou non, est présentée. Pour les pylônes principaux particulièrem...

  19. Heat transfer in gas-cooled piles; Echanges thermiques dans les piles a gaz

    Energy Technology Data Exchange (ETDEWEB)

    Le Foll, J; Gelin, P; Robert, E de [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    . Technological studies led to such developments as special machining of the caps, using high conductibility metanes, anodic oxidation of thin discs. They provided the basis for solving the problem by removing the more trouble-some heat sources and providing heat insulation of the caps. Experimental study of convection around the fuel rod extremities led then to formulate specific boundary conditions of conduction inside the caps for any given geometry. Conduction in turn was studied by electrical analogy and permitted to map the temperature distribution of the critical region. (author) [French] Des mesures de coefficients d'echange locaux effectuees en regime etabli sur une gaine a ailettes longitudinales montrent que la distribution de ces coefficients le long du contour chauffant d'une section droite presente en general des singularites tres accentuees qui rendent inapplicables les calculs classiques de conduction dans les ailettes. Une etude systematique de cette distribution etablit cependant que deux coefficients numeriques calcules par integration dans le plan de section droite suffisent a rattacher les proprietes thermiques globales a celles d'un canal circulaire de contour isotherme, avec une approximation suffisante dans la plupart des cas. Bien qu'assez delicat, le calcul de ces deux coefficients est rendu accessible par deux analogies rheoelectriques et on peut meme atteindre directement l'influence d'une petite deformation du contour de gaine. Pour une valeur donnee de la temperature limite de gaine, le calcul des performances du canal entier est effectue en considerant que cette limite est effectivement atteinte dans une section droite courante. En pratique, la division du combustible en cartouches courtes risque d'introduire des singularites importantes par rapport a ce cas ideal et le probleme se pose de determiner la forme des extremites de cartouches pour eviter que ces singularites n'affectent les performances. Or, les bouchons qui assurent la fermeture des

  20. Combustion physics

    Science.gov (United States)

    Jones, A. R.

    1985-11-01

    Over 90% of our energy comes from combustion. By the year 2000 the figure will still be 80%, even allowing for nuclear and alternative energy sources. There are many familiar examples of combustion use, both domestic and industrial. These range from the Bunsen burner to large flares, from small combustion chambers, such as those in car engines, to industrial furnaces for steel manufacture or the generation of megawatts of electricity. There are also fires and explosions. The bountiful energy release from combustion, however, brings its problems, prominent among which are diminishing fuel resources and pollution. Combustion science is directed towards finding ways of improving efficiency and reducing pollution. One may ask, since combustion is a chemical reaction, why physics is involved: the answer is in three parts. First, chemicals cannot react unless they come together. In most flames the fuel and air are initially separate. The chemical reaction in the gas phase is very fast compared with the rate of mixing. Thus, once the fuel and air are mixed the reaction can be considered to occur instantaneously and fluid mechanics limits the rate of burning. Secondly, thermodynamics and heat transfer determine the thermal properties of the combustion products. Heat transfer also plays a role by preheating the reactants and is essential to extracting useful work. Fluid mechanics is relevant if work is to be performed directly, as in a turbine. Finally, physical methods, including electric probes, acoustics, optics, spectroscopy and pyrometry, are used to examine flames. The article is concerned mainly with how physics is used to improve the efficiency of combustion.

  1. Tension Tests On Bored Piles In Sand

    DEFF Research Database (Denmark)

    Krabbenhøft, Sven; Clausen, Johan; Damkilde, Lars

    2006-01-01

    The lengths of the bored piles varied from 2 m to 6 m and all were of a diameter of 140 mm. The piles were tested to failure in tension and the load-displacement relations were recorded. The investigation has shown pronounced differences between the load bearing capacities obtained by different...... design methods. The methods proposed by Fleming et al. and Reese & O’Neill seem to produce the best match with the test results....

  2. Pulse pile-up. I: Short pulses

    International Nuclear Information System (INIS)

    Wilkinson, D.H.

    1990-07-01

    The search for rare large pulses against an intense background of smaller ones involves consideration of pulse pile-up. Approximate methods are presented, based on ruin theory, by which the probability of such pile-up may be estimated for pulses of arbitrary form and of arbitrary pulse-height distribution. These methods are checked against cases for which exact solutions are available. The present paper is concerned chiefly with short pulses of finite total duration. (Author) (5 refs., 24 figs.)

  3. Analyse de la dynamique non-linéaire et du contrôle des instabilités de combustion fondée sur la "Flame Describing Function" (FDF)

    OpenAIRE

    Boudy , Frédéric

    2012-01-01

    This thesis is concerned with an investigation of combustion instabilities in premixed combustors. This problem has been the subject of a continuous effort in relation with the many issues encountered in practical systems like those used in propulsion and energy production. Combustion instabilities usually arise from the coupling between combustion and acoustic eigenmodes of the system. In most cases such resonances lead to vibrations, structural fatigue and intensified heat fluxes to the cha...

  4. Grouting of uranium mill tailings piles

    International Nuclear Information System (INIS)

    Boegly, W.J. Jr.; Tamura, T.; Williams, J.D.

    1984-03-01

    A program of remedial action was initiated for a number of inactive uranium mill tailings piles. These piles result from mining and processing of uranium ores to meet the nation's defense and nuclear power needs and represent a potential hazard to health and the environment. Possible remedial actions include the application of covers to reduce radon emissions and airborne transport of the tailings, liners to prevent groundwater contamination by leachates from the piles, physical or chemical stabilization of the tailings, or moving the piles to remote locations. Conventional installation of liners would require excavation of the piles to emplace the liner; however, utilization of grouting techniques, such as those used in civil engineering to stabilize soils, might be a potential method of producing a liner without excavation. Laboratory studies on groutability of uranium mill tailings were conducted using samples from three abandoned piles and employing a number of particulate and chemical grouts. These studies indicate that it is possible to alter the permeability of the tailings from ambient values of 10 -3 cm/s to values approaching 10 -7 cm/s using silicate grouts and to 10 -8 cm/s using acrylamide and acrylate grouts. An evaluation of grouting techniques, equipment required, and costs associated with grouting were also conducted and are presented. 10 references, 1 table

  5. Simplified theory of gas-jet pumps and experimental verification; Theorie simplifiee des trompes a gaz et verification experimentale

    Energy Technology Data Exchange (ETDEWEB)

    Costes, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    With a view to using the gas-jet pump in the fuel-study loops of gas reactors, a theory is developed for an unidimensional mixer, applicable to the case of low compression ratios in the induced current. This theory makes it possible to optimize the diameter of the mixer if the pressure-drop coefficient {alpha} of the mixer is known with respect to the induced current. An experimental study has made it possible to define the geometry suitable for such pumps, and to provide a remarkably constant value of {alpha} for the economically advantageous designs; this makes it possible to define simply the geometry of the optimized pump as a function of the geometry of the circuit in use, and independently of the flow-rate conditions. (author) [French] Dans le but d'utiliser la pompe a jet (ou trompe) dans des boucles d'etude de combustible des piles a gaz, on etablit une theorie du melangeur unidimensionnel, applicable dans la cas des faibles rapports de compression dans le courant induit. Cette theorie permet l'optimisation du diametre de melangeur, moyennant la connaissance du coefficient {alpha} de pertes de charge de celui-ci, relativement au courant induit. Une recherche experimentale a permis de preciser la geometrie a adopter dans de telles pompes, et fourni pour {alpha} une valeur remarquablement constante dans les configurations economiquement interessantes, ce qui permet de definir simplement la geometrie de la pompe optimisee en fonction de la geometrie du circuit d'utilisation et independamment des conditions de debit. (auteur)

  6. Design of the Small Rods Forming the Fuel Element of the First Charge of the EL4 Reactor. Cladding Problems; Etude des crayons constituant l'element combustible du premier jeu d'EL4 - probleme de la gaine; Problema pokrytiya nebol'shikh steeknej, obrazushchikh toplivnyj ehlement pervoj zagruzki reaktora EL.4; Estudio de las barras que constituyen los elementos combustibles de la primera carga del reactor EL4 - el problema de las vainas

    Energy Technology Data Exchange (ETDEWEB)

    Bailly, H.; Ringot, C.; Weisz, M. [Centre d' Etudes Nucleaires de Saclay (France)

    1963-11-15

    The fuel element for the first charge of EL4 makes use of stainless steel cans. The grade of steel chosen and the can thickness depend on the corrosion resistance and mechanical strength required. The operating stresses and temperatures are such that fabrication of a can lasting throughout the life of the fuel element calls for a highly resistant grade of steel, of thickness greater than 0.5 mm. When the can bears on the fuel as a result of creep, deformation in diametrical clearance may lead to ovalization and folding, while deformation in longitudinal clearance may cause buckling of the can. Numerous tests have been carried out on cans of thickness 0.3 and 0.4 mm to determine type of deformation as a function of clearance. To be certain of avoiding ovalization with the thicknesses proposed and to keep the internal temperature of the fuel as low as possible, the clearance must be reduced to zero in fabrication. (author) [French] L'element combustible du premier jeu EL4 utilise des gaines en acier inoxydable. Le choix de la nuance et de l'epaisseur de la gaine est lie a des considerations de tenue a la corrosion et de tenue mecanique. Les contraintes et les temperatures d'utilisation ne permettent pas de concevoir une gaine resistante pendant toute la vie de l'element combustible a moins d'utiliser une nuance tres resistante et d'epaisseur superieure a 0,5 mm. On admet que la gaine s'applique par fluage sur le combustible: la deformation dans les jeux diametraux peut conduire a la formation d'une ovalisation et d'un pli; la deformation dans les jeux longitudinaux peut conduire a des flambages de la gaine. De nombreux essais ont ete realises sur des gaines d'epaisseurs 0,3 et 0,4 mm pour connaitre le mode de deformation en fonction des jeux. Pour etre certain de ne jamais avoir d'ovalisation avec les epaisseurs envisagees, et pour avoir la temperature a coeur du combustible la plus basse possible, on est conduit a reduire a zero le jeu en fabrication. (author

  7. Study of cartridge rupture detection installations; Contribution a l'etude des installations de detection de ruptures de gaine

    Energy Technology Data Exchange (ETDEWEB)

    Graftieaux, J; Douet, P; Roguin, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    Very numerous physical or technological parameters are involved in the preparation of projects for can rupture detection installations. These parameters are connected essentially with the design of the reactor, the detector used, the disposition of the pneumatic circuits, the type of fuel and the safety required. The present report analyses the main problems arising and their mutual compatibilities; it defines a certain number of ideas which had up till now been accepted implicitly in the design. (authors) [French] De tres nombreux parametres physiques ou technologiques interviennent dans l'etablissement du projet d'une installation de detection de ruptures de gaines. Ces parametres decoulent essentiellement de la conception de la pile, du detecteur utilise, de l'organisation des circuits pneumatiques, du type du combustible et de la securite souhaitee. Le present document analyse les principaux problemes qui se posent ainsi que leurs compatibilites reciproques et precise un certain nombre de notions jusqu'alors admises implicitement lors de l'etablissement des projets. (auteurs)

  8. Experimental Verification of Integrity of Low-Pressure Injection Piles Structure - Pile Internal Capacity

    Science.gov (United States)

    Pachla, Henryk

    2017-12-01

    The idea of strengthening the foundation using injection piles lies in transferring loads from the foundation to the piles anchorage in existing structure and formed in the soil. Such a system has to be able to transfer loads from the foundation to the pile and from the pile onto the soil. Pile structure often reinforced with steel element has to also be able to transfer such a loading. According to the rules of continuum mechanics, the bearing capacity of such a system and a deformation of its individual elements can be determined by way of an analysis of the contact problem of three interfaces. Each of these surfaces is determined by different couples of materials. Those surfaces create: pile-foundation anchorage, bonding between reinforcement and material from which the pile is formed and pilesoil interface. What is essential is that on the contact surfaces the deformation of materials which adhere to each other can vary and depends on the mechanical properties and geometry of these surfaces. Engineering practice and experimental research point out that the failure in such structures occurs at interfaces. The paper is concentrating on presenting the experiments on interaction between cement grout and various types of steel reinforcement. The tests were conducted on the special low pressure injection piles widely used to strengthen foundations of already existing structures of historical buildings due to the technology of formation and injection pressure.

  9. Experimental Verification of Integrity of Low-Pressure Injection Piles Structure – Pile Internal Capacity

    Directory of Open Access Journals (Sweden)

    Pachla Henryk

    2017-12-01

    Full Text Available The idea of strengthening the foundation using injection piles lies in transferring loads from the foundation to the piles anchorage in existing structure and formed in the soil. Such a system has to be able to transfer loads from the foundation to the pile and from the pile onto the soil. Pile structure often reinforced with steel element has to also be able to transfer such a loading. According to the rules of continuum mechanics, the bearing capacity of such a system and a deformation of its individual elements can be determined by way of an analysis of the contact problem of three interfaces. Each of these surfaces is determined by different couples of materials. Those surfaces create: pile-foundation anchorage, bonding between reinforcement and material from which the pile is formed and pilesoil interface. What is essential is that on the contact surfaces the deformation of materials which adhere to each other can vary and depends on the mechanical properties and geometry of these surfaces. Engineering practice and experimental research point out that the failure in such structures occurs at interfaces. The paper is concentrating on presenting the experiments on interaction between cement grout and various types of steel reinforcement. The tests were conducted on the special low pressure injection piles widely used to strengthen foundations of already existing structures of historical buildings due to the technology of formation and injection pressure.

  10. Evaluation of axial pile bearing capacity based on pile driving analyzer (PDA) test using Neural Network

    Science.gov (United States)

    Maizir, H.; Suryanita, R.

    2018-01-01

    A few decades, many methods have been developed to predict and evaluate the bearing capacity of driven piles. The problem of the predicting and assessing the bearing capacity of the pile is very complicated and not yet established, different soil testing and evaluation produce a widely different solution. However, the most important thing is to determine methods used to predict and evaluate the bearing capacity of the pile to the required degree of accuracy and consistency value. Accurate prediction and evaluation of axial bearing capacity depend on some variables, such as the type of soil, diameter, and length of pile, etc. The aims of the study of Artificial Neural Networks (ANNs) are utilized to obtain more accurate and consistent axial bearing capacity of a driven pile. ANNs can be described as mapping an input to the target output data. The method using the ANN model developed to predict and evaluate the axial bearing capacity of the pile based on the pile driving analyzer (PDA) test data for more than 200 selected data. The results of the predictions obtained by the ANN model and the PDA test were then compared. This research as the neural network models give a right prediction and evaluation of the axial bearing capacity of piles using neural networks.

  11. The Effects of Time on Soil Behaviour and Pile Capacity

    DEFF Research Database (Denmark)

    Augustesen, Anders

    When designing pile foundations, static design equations, pile driving formulae, static loading tests or stress wave analyses can be employed to estimate the axial capacity of single piles. Both laboratory and field tests show that soil exhibits time-dependent behaviour. An important result...... based on a set of static loading tests. In the literature it is suggested that the pile capacity increases with the logarithm to time after installation which is confirmed in this thesis. In continuation of this, it is analysed whether the magnitude of the set-up is related to the properties of the clay...... circumstances (e.g. load specifications, length of pile, pile material). In order to evaluate the design methods for piles in clay, it is necessary to correct for time between pile driving and pile testing. Results of testing the calculation procedures against the available data by employing different time...

  12. Analysis of Dynamic Stiffness of Bridge Cap-Pile System

    Directory of Open Access Journals (Sweden)

    Jinhui Chu

    2018-01-01

    Full Text Available In order to investigate the applicability of dynamic stiffness for bridge cap-pile system, a laboratory test was performed. A numerical model was also built for this type of system. The impact load was applied on the cap top and the dynamic stiffness was analysed. Then, the effect of the effective friction area between pile and soil was also considered. Finally, the dynamic stiffness relationship between the single pile and the cap-pile system was also compared. The results show that the dynamic stiffness is a sensitive index and can well reflect the static characteristics of the pile at the elastic stage. There is a significant positive correlation between the vertical dynamic stiffness index and bearing capacity of the cap-pile system in the similar formation environment. For the cap-pile system with four piles, the dynamic stiffness is about four times as large as the single pile between 10 and 20 Hz.

  13. Pile foundation of nuclear power plant structures

    International Nuclear Information System (INIS)

    Jurkiewicz, W.J.; Thomaz, E.; Rideg, P.; Girao, M.

    1978-01-01

    The subject of pile foundation used for nuclear power plant structures, considering the experience gained by the designers of the Angra Nuclear Power Plant, Units 2 and 3 in Brazil is dealt with. The general concept of the pile foundations, including types and execution of the piles, is described briefly. Then the two basic models, i.e. the static model and the dynamic one, used in the design are shown, and the pertinent design assumptions as related to the Angra project are mentioned. The criteria which established the loading capacity of the piles are discussed and the geological conditions of the Angra site are also explained briefly, justifying the reasons why pile foundations are necessary in this project. After that, the design procedures and particularly the tools - i.e. the computer programs - are described. It is noted that the relatively simple but always time consuming job of loading determination calculations can be computerized too, as it was done on this project through the computer program SEASA. The interesting aspects of soil/structure interaction, applicable to static models, are covered in detail, showing the theoretical base wich was used in the program PILMAT. Then the advantage resulting from computerizing of the job of pile reinforcement design are mentioned, describing briefly the jobs done by the two special programs PILDES and PILTAB. The point is stressed that the effort computerizing the structural design of this project was not so much due to the required accuracy of the calculations, but mainly due to the need to save on the design time, as to allow to perform the design task within the relatively tight time schedule. A conclusion can be drawn that design of pile foundations for nuclear power plant structures is a more complex task than the design of bearing type of foundation for the same structures, but that the task can be always made easier when the design process can be computerized. (Author)

  14. G 2 reactor project; Projet de pile a double fin: G 2

    Energy Technology Data Exchange (ETDEWEB)

    Ailleret, [Electricite de France (EDF), Dir. General des Etudes de Recherches, 75 - Paris (France); Taranger, P; Yvon, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-07-01

    The CEA actually constructs the G-2 reactor core working with natural uranium, which will use graphite as moderator, and gas under pressure as cooling fluid. This report presents the specificity of the new reactor: - the different elements of the reactor core, - the control and the security of the reactor, - the renewal of the fuel, - the biologic surrounding wall, - and the cooling circuit. (M.B.) [French] le Commissariat a l'Energie Atomique construit actuellement la pile G-2 a Uranium naturel, qui utilisera le graphite comme moderateur, et le gaz sous pression comme fluide de refroidissement. Ce rapport presente les specificite du nouveau reacteur: - les differents elements de la pile, - le controle et la securite du reacteur, - le renouvellement du combustible, - l'enceinte biologique, - et le circuit de refroidissement. (M.B.)

  15. Measurement and Analysis of Horizontal Vibration Response of Pile Foundations

    Directory of Open Access Journals (Sweden)

    A. Boominathan

    2007-01-01

    Full Text Available Pile foundations are frequently used in very loose and weak deposits, in particular soft marine clays deposits to support various industrial structures, power plants, petrochemical complexes, compressor stations and residential multi-storeyed buildings. Under these circumstances, piles are predominantly subjected to horizontal dynamic loads and the pile response to horizontal vibration is very critical due to its low stiffness. Though many analytical methods have been developed to estimate the horizontal vibration response, but they are not well validated with the experimental studies. This paper presents the results of horizontal vibration tests carried out on model aluminium single piles embedded in a simulated Elastic Half Space filled with clay. The influence of various soil and pile parameters such as pile length, modulus of clay, magnitude of dynamic load and frequency of excitation on the horizontal vibration response of single piles was examined. Measurement of various response quantities, such as the load transferred to the pile, pile head displacement and the strain variation along the pile length were done using a Data Acquisition System. It is found that the pile length, modulus of clay and dynamic load, significantly influences the natural frequency and peak amplitude of the soil-pile system. The maximum bending moment occurs at the fundamental frequency of the soil-pile system. The maximum bending moment of long piles is about 2 to 4 times higher than that of short piles and it increases drastically with the increase in the shear modulus of clay for both short and long piles. The active or effective pile length is found to be increasing under dynamic load and empirical equations are proposed to estimate the active pile length under dynamic loads.

  16. Biofuels combustion.

    Science.gov (United States)

    Westbrook, Charles K

    2013-01-01

    This review describes major features of current research in renewable fuels derived from plants and from fatty acids. Recent and ongoing fundamental studies of biofuel molecular structure, oxidation reactions, and biofuel chemical properties are reviewed, in addition to combustion applications of biofuels in the major types of engines in which biofuels are used. Biofuels and their combustion are compared with combustion features of conventional petroleum-based fuels. Two main classes of biofuels are described, those consisting of small, primarily alcohol, fuels (particularly ethanol, n-butanol, and iso-pentanol) that are used primarily to replace or supplement gasoline and those derived from fatty acids and used primarily to replace or supplement conventional diesel fuels. Research efforts on so-called second- and third-generation biofuels are discussed briefly.

  17. The purification by ion exchange resins of the heavy water la the reactors EL1 and EL2. B - study of the general properties of the resins used; Purification par resines echangeuses d'ions de l'eau lourde de reacteurs EL1 et EL2. B - etude des proprietes generales des resines utilisees

    Energy Technology Data Exchange (ETDEWEB)

    Fourre,; Platzer, [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    Within the programme of the pile heavy water purification project, organized by the stable Isotopes Section, we have carried out a certain number of tests on ion exchange resins. The problem posed by the stable Isotopes Section was to determine the conditions of utilisation of ion exchange resins, knowing that they would be employed in a system branching off the heavy water circuit in the piles. These investigations were carried out in close collaboration with the stable Isotopes Section, and were guided chiefly by the extremely short delay permitted between the laboratory study and its application to the piles. The tests are divided into two groups: 1- General properties of the resins. 2- Utilisation of the resins, particularly in an apparatus similar to those mounted on the piles but of smaller dimensions. (author) [French] Dans le cadre du projet d'epuration de l'eau lourde des piles, traite par la Section des Isotopes stables, nous avons fait un certain nombre d'essais sur les resines echangeuses d'ions. Le probleme pose par la Section des Isotopes stables etait de determiner les conditions d'utilisation des resines echangeuses d'ions sachant qu'elles devraient etre employees dans un appareil place en derivation sur le circuit d'eau lourde des piles. L'ensemble de l'etude a ete mene en collaboration etroite avec la Section des Isotopes stables et a ete guide principalement par le delai extremement court dans lequel l'etude de laboratoire devait etre appliquee aux piles. Les essais se divisent en deux groupes: 1- Proprietes generales des resines. 2- Utilisation des resines, en particulier dans un appareil analogue a ceux montes sur les piles, mais de dimensions reduites. (auteur)

  18. Test Procedure for Axially Loaded Piles in Sand

    DEFF Research Database (Denmark)

    Thomassen, Kristina

    The test procedure described in the following is used when examining the effects of static or cyclic loading on the skin friction of an axially loaded pile in dense sand. The pile specimen is only loaded in tension to avoid any contribution from the base resistance. The pile dimensions are chosen...... to resemble full scale dimension of piles used in offshore pile foundations today. In this report is given a detailed description of the soil preparation and pile installation procedures as well data acquisition methods....

  19. Pile Design Based on Cone Penetration Test Results

    OpenAIRE

    Salgado, Rodrigo; Lee, Junhwan

    1999-01-01

    The bearing capacity of piles consists of both base resistance and side resistance. The side resistance of piles is in most cases fully mobilized well before the maximum base resistance is reached. As the side resistance is mobilized early in the loading process, the determination of pile base resistance is a key element of pile design. Static cone penetration is well related to the pile loading process, since it is performed quasi-statically and resembles a scaled-down pile load test. In ord...

  20. Seismic behavior analysis of piled drums

    International Nuclear Information System (INIS)

    Aoki, H.; Kosaka, T.; Mizushina, T.; Shimizu, M.; Uji, S.; Tsuchiya, H.

    1987-01-01

    In general, low level radioactive waste is packed in drums and stored in a warehouse being piled vertically, or laid horizontally. To observe the behavior of piled drums during an earthquake, an experimental study was reported. The experimental study is limited by the vibrating platform capacity. To carry out these tests up to the supporting limit is not recommended, in view of the vibrating platform curing as well as the operators' security. It is very useful to develop the analytical method for simulating the behavior of the drums. In this report, a computer program of piled drum's dynamic motion is shown, and the analytical result is referred to the experimental result. From the result of experiment on piled drums, the sliding effect has been found to be very important for the stability of drum, and the rocking motion observed, showing a little acceleration is less than the static estimated value. Behavior of piled drums is a complex phenomena comprising of sliding, rocking and jumping

  1. Three dimensional analysis of laterally loaded piles

    International Nuclear Information System (INIS)

    Yilmaz, C.

    1987-01-01

    In this study static analysis of laterally loaded pile is studied by the three models. The first model is the beam on discrete elastic springs. This model is analyzed using a flexibility method. The second model is the beam on a two-parameter elastic foundation. This model is analyzed using the linear finite element method. The third model is the finite element model, using the three-dimensional iso-parametric parabolic brick element. Three-dimensional pile group analysis is also performed using elastic constants of single pile obtained by any one of the above analyses. The main objective is to develop computer programs for each model related to single piles and to group analysis. Then, the deflections, rotations, moments, shears, stresses and strains of the single pile are obtained at any arbitrary point. Comparison is made between each model and with other studies such as Poulos 1971, Desai and Appel 1976. In addition, to provide a benchmark of three-dimensional finite element analysis, the Boussinesq problem is analyzed. (orig.)

  2. Structures and properties of (U,Pu)O{sub 2} containing non-active fission products. A simulation of irradiated nuclear fuel; Structure et proprietes de (U, Pu)O{sub 2} contenant des produits de fission sous forme inactive. Une simulation de combustible nucleaire irradie

    Energy Technology Data Exchange (ETDEWEB)

    Schmitz, F [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    We have made oxides with the same uranium and plutonium content, the same stoichiometry and the same fission product content as an oxide fuel (U{sub 0,8}PuO{sub 2})O{sub 1,96} after 2 per cent burn up. We have calculated the stoichiometry changes due to irradiation and checked the calculation by X rays parameters measurements. We have calculated and measured the contraction of the oxide lattice due to fission products in solid solution. Microprobe analysis of precipitates have been made and have lead to the identification of non metallic barium containing compounds and have shown the particular behaviour of molybdenum. Some physical properties have been measured especially the electrical resistivity, the thermal diffusivity and the vapour pressure of zirconium in solid solution. (author) [French] Nous avons fabrique des oxydes dont la composition en uranium et plutonium, la stoechiometrie et la teneur en produit de fission, sont identiques a celles d'un oxyde (U{sub 0,8}PuO{sub 2})O{sub 1,96} ayant subi 2 pour cent de combustion. Nous avons calcule les changements de stoechiometrie entraines par l'irradiation et controle ces calculs par des mesures de parametre. Nous avons calcule et mesure la contraction du reseau due aux produits de fissions solubles dans la matrice. Des analyses a la microsonde des precipites de produits de fission insolubles ont ete faites et ont conduit a l'identification de composes non metalliques contenant du baryum et a la mise en evidence du role particulier du molybdene. Certaines proprietes physiques ont ete mesurees sur ces composes, en particulier la resistivite electrique, la diffusivite thermique et la tension de vapeur du zirconium dissout dans la matrice. (auteur)

  3. The development of a cell-assembly for the treatment of irradiated fuels on a semi-industrial scale; Etude concernant la realisation d'un ensemble de cellules destinees a des traitements de combustibles irradies a l'echelle semi-industrielle

    Energy Technology Data Exchange (ETDEWEB)

    Faugeras, P; Couture, J; Lefort, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    The main studies and experiments involved in the development of a cell-assembly for the treatment of irradiated fuels on a semi-industrial scale are described. It must be possible to modify or transform each of these cells without interrupting the rest of the pilot. A full-scale prototype cell (3 x 4 x 6 m) has been built with an {alpha}-protection independent of the {gamma}-protection. It features all the main characteristics: tightness to {gamma} losses, dense glass lighting, ventilation. This cell has made possible trials on transfer, remote-controls and tele-dismantling, as well as the development of new methods of rapidly connecting hydraulic circuits. In conclusion the final form is given of the cells selected for the pilot. (author) [French] Il est decrit les principales etudes et experiences faites en vue de la realisation d'un ensemble de cellules destinees a des traitements de combustibles irradies a l'echelle semi-industrielle. Chacune de ces cellules doit pouvoir etre modifiee ou transformee sans interrompre le reste du pilote. Une cellule prototype vraie grandeur (3x4x6 m) est construite avec une protection {alpha} independante de la protection {gamma}. Elle comporte tous les elements importants: porte {gamma} etanche, eclairage verre dense, ventilation. Cette cellule a permis des experiences de transferts de telemanipulateurs et de teledemontages, ainsi que la mise au point de nouveaux procedes de jonction rapide pour des circuits hydrauliques. En conclusion, on indique la forme definitive des cellules retenues pour le pilote. (auteur)

  4. Tables of formulae for calculating the mechanics of stacks in gas-graphite reactors; Formulaire pour le calcul de la mecanique des empilements des reacteurs graphite-gaz

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1968-07-01

    This collection of formulae only gives, for nuclear graphite stacks. The mechanical effects due to the strains, thermal or not, of steel structures supporting or surrounding graphite blocks. Equations have been established by mean of experiments made at Chinon with large pile models. Thus, it is possible to calculate displacement, strain and stress in the EDF type stacks of horizontal triangular block lattice. (authors) [French] Le domaine de ce formulaire est strictement limite aux effets mecaniques, pour les empilements, des deformations, thermiques ou autres, des structures metalliques de soutien (aire - support et corset). On propose un ensemble de relations qui ont ete etablies a la suite des essais de CHINON sur des maquettes de grande taille. Ces relations permettent le calcul des mouvements, des deformations et des contraintes dans les empilements du type EDF, a reseau horizontal triangulaire regulier. (auteurs)

  5. In pile helium loop ''Comedie''

    International Nuclear Information System (INIS)

    Blanchard, R.J.

    1985-01-01

    The loop is located in the SILOE reactor at Centre d'Etudes Nucleaires de Grenoble. The purpose and objectives are divided into two groups, principal and secondary. The primary objective was to provide basic data on the deposition behavior of important condensable fission products on a variety of steel surfaces, i.e. temperature (sorption isotherms) and mass transfer (physical adsorption) dependencies; to provide information concerning the degree of penetration of important fission products into the metals comprising the heat exchanger-recuperator tubes as a function of alloy type and/or metal temperature; to provide complementary information on the reentrainment (liftoff) of important fission and activation products by performing out-of-pile blowdown experiments on tube samples representative of the alloy types used in the heat exchanger-recuperator and of the surface temperatures experienced during plateout. The secondary objective was to provide information concerning the migration of important fission products through graphite. To this end, concentration profiles in the web between the fuel rods containing the fission product source and the coolant channels and in the graphite diffusion sample will be measured to study the corrosion of metallic specimens placed in the conditions of high temperature gas cooled reactor. The first experiment SRO enables to determine the loop characteristics and possibilities related to thermal, thermodynamic, chemical and neutronic properties. The second experiment has been carried out in high temperature gas cooled reactor operating conditions. It enables to determine in particular the deposition axial profile of activation and fission products in the plateout section constituting the heat exchanger, the fission products balance trapped in the different filter components, and the cumulated released fraction of solid fission products. The SR1 test permits to demonstrate in particular the Comedie loop operation reliability, either

  6. Picking up Clues from the Discard Pile

    Science.gov (United States)

    2008-01-01

    As NASA's Phoenix Mars Lander excavates trenches, it also builds piles with most of the material scooped from the holes. The piles, like this one called 'Caterpillar,' provide researchers some information about the soil. On Aug. 24, 2008, during the late afternoon of the 88th Martian day after landing, Phoenix's Surface Stereo Imager took separate exposures through red, green and blue filters that have been combined into this approximately true-color image. This conical pile of soil is about 10 centimeters (4 inches) tall. The sources of material that the robotic arm has dropped onto the Caterpillar pile have included the 'Dodo' and ''Upper Cupboard' trenches and, more recently, the deeper 'Stone Soup' trench. Observations of the pile provide information, such as the slope of the cone and the textures of the soil, that helps scientists understand properties of material excavated from the trenches. For the Stone Soup trench in particular, which is about 18 centimeters (7 inches) deep, the bottom of the trench is in shadow and more difficult to observe than other trenches that Phoenix has dug. The Phoenix team obtained spectral clues about the composition of material from the bottom of Stone Soup by photographing Caterpillar through 15 different filters of the Surface Stereo Imager when the pile was covered in freshly excavated material from the trench. The spectral observation did not produce any sign of water-ice, just typical soil for the site. However, the bigger clumps do show a platy texture that could be consistent with elevated concentration of salts in the soil from deep in Stone Soup. The team chose that location as the source for a soil sample to be analyzed in the lander's wet chemistry laboratory, which can identify soluble salts in the soil. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed

  7. Control of surplus oxygen in the combustion zone reduces fuel costs and NO{sub x} emissions; Verringerung der Brennstoffkosten und NO{sub X}-Emissionen durch Regelung des Sauerstoffueberschusses in der Brennzone

    Energy Technology Data Exchange (ETDEWEB)

    Boltz, Eric S. [Marathon Sensors Inc. (Germany); Baumann, Jens [Process Electronic GmbH (Germany)

    2009-06-15

    Real time in-situ measurement of oxygen content and temperature in the combustion zone of a heating boiler or furnace permits monitoring of combustion conditions at source. Measurements of oxygen surplus and of temperature at strategic points supply us with instantaneous information for optimum control of the combustion process. Accurate and rapid measurement of oxygen surplus is vital in view of the cost explosion in the case of fuels, and also for reduction of NO{sub x} emissions. Locally available commercial high-temperature oxygen sensors make it possible to solve problems of combustion control and burner regulation with only short amortization periods and high annual financial benefits in power generating plant, petrochemicals, refinery and glassworks applications. (orig.)

  8. Synthesis of concrete bridge piles prestressed with CFRP systems.

    Science.gov (United States)

    2017-06-01

    The Texas Department of Transportation frequently constructs prestressed concrete piles for use in bridge : foundations. Such prestressed concrete piles are typically built with steel strands that are highly susceptible to : environmental degradation...

  9. Laboratory Test Setup for Cyclic Axially Loaded Piles in Sand

    DEFF Research Database (Denmark)

    Thomassen, Kristina; Ibsen, Lars Bo; Andersen, Lars Vabbersgaard

    2017-01-01

    This paper presents a comprehensive description and the considerations regarding the design of a new laboratory test setup for testing cyclic axially loaded piles in sand. The test setup aims at analysing the effect of axial one-way cyclic loading on pile capacity and accumulated displacements....... Another aim was to test a large diameter pile segment with dimensions resembling full-scale piles to model the interface properties between pile and sand correctly. The pile segment was an open-ended steel pipe pile with a diameter of 0.5 m and a length of 1 m. The sand conditions resembled the dense sand...... determined from the API RP 2GEO standard and from the test results indicated over consolidation of the sand. Two initial one-way cyclic loading tests provided results of effects on pile capacity and accumulated displacements in agreement with other researchers’ test results....

  10. Radiation Protection in the Experimental Pile Marius

    International Nuclear Information System (INIS)

    Cohendy, G.

    1962-01-01

    Measurements made around the experimental pile 'Marius' made it possible to determine the valid characteristics of the slabs designed to improve the biological protection by covering the charge and discharge pits. These measurements also made it possible to evaluate the risks occurring when the pile is operating at various Powers and to make a reasonable estimate of the value of the ratio of the total danger due to neutrons (thermal and fast) and γ radiation and to the danger due only to the γ radiation. A knowledge of this ratio makes it possible to make satisfactory evaluations with a single apparatus which is really portable. (author) [fr

  11. Piles of dislocation loops in real crystals. 2. Evolution of dislocation piles under irradiation

    International Nuclear Information System (INIS)

    Dubinko, V.I.; Turkin, A.A.; Yanovskij, V.V.

    1985-01-01

    The given paper considers evolution of piles in a real molybdenum crystal under neutron irradiation. Obtained was a stability criterium, when meeting it interstitial piles (one-dimensional periodical structures of interstitial loops) in the crystal tend to stationary state under the irradiation and, when disturbing the criterium, they disintegrate into rapidly growing interstitial isolated loops. It was also shown that the generation of dense vacancy piles results in the formation of an ordering structure of isolated vacancy loops. Theoretical results agree good with experimental data

  12. Summary on out-of-pile and in-pile properties of M5 alloy

    International Nuclear Information System (INIS)

    Zhao Wenjin

    2001-01-01

    The out-of-pile and in-pile corrosion, mechanical properties, microstructure,hydrogen absorption, creep and growth resistances of M5 alloy using as PWR fuel rod cladding materials developed by FRAMATOME in France has been summarized with reference to the literatures. The results obtained from in-pile irradiation tests show that the corrosion and hydrogen absorption resistances, creep and irradiation growth resistances of M5 alloy cladding are superior to that of the optimized Zircaloy-4. It could be estimated that the M5 alloy enables rod burnups close to 65GWd/tU to be reached

  13. Analysis of radon protection cover on uranium tailings pile

    International Nuclear Information System (INIS)

    Zhang Zhe

    1993-01-01

    The average radon emanation rate of the whole surface over one year was used for evaluating the radon release of uranium tailings pile. The effective of radon protection cover depends on the shape and property of the tailings pile, the properties of covering and the control of air vadose in the pile. It was indicated that the covering with low diffusion coefficient, small porosity and bad permeability was suitable to cover the pile. The analytical formula of the covering layer thickness was given

  14. The Cyrano program. 1 - description and operation of an irradiation device 'Cyrano'. 2 - results of the experiments Cyrano 1 and 2 (study of the EL 4 first-bach pencil); measurement of the thermal conductivity integral for UO{sub 2} sintered up to 2300 deg C; evolution of fission gases at constant power; Programme Cyrano. 1 - description et exploitation d'un dispositif d'irradiation ''cyrano''. 2 - resultats des experiences cyrano 1 et 2 (etude du crayon EL4 1. jeu). Mesure de l'integrale de conductibilite thermique d'UO{sub 2} fritte jusqu'a 2300 deg C. Evolution des gaz de fission a puissance constante

    Energy Technology Data Exchange (ETDEWEB)

    Stora, J P; Chenebault, P [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    Two rods of the type 'EL 4 first score' have been irradiated in 'Cyrano' capsules which are suited for continuous measurement of the nuclear power evolved and equipped with thermocouples. The variations of the integral of conductivity of sintered 96 per cent theoretical dense UO{sub 2} has been established until 2300 deg. C; these variations are coherent with those previously measured out-of-pile. The released fission gases have been recovered at different times during the irradiation: the kinetics of release of stable gases is such that, in the experimental conditions (T{sub surface} = 610 deg. C, {integral}{sub T{sub s}}{sup T{sub c}} kdT = 34.7 W cm{sup -1}) the fraction of released gases is still widely increasing after 12 days of irradiation. Numerous observations have been made on concentrations of rare gases locally present in the irradiated fuel. (authors) [French] L'irradiation de deux crayons combustibles type EL 4, 1er jeu, a ete menee a bien dans des capsules 'Cyrano' equipees de dispositifs de mesure continue de la puissance nucleaire et de plusieurs reperes de temperatures; la variation de l'integrale de conductibilite thermique de l'oxyde d'uranium fritte (96 pour cent d. th.) a ete tracee jusqu'a 2300 deg. C; la courbe representative de ces variations est coherente avec celle obtenue precedemment hors pile. Les gaz de fission apparus hors du combustible ont ete extraits du crayon a plusieurs reprises pendant l'experience: la cinetique d'accumulation des gaz stables est telle que dans les conditions etudiees (T{sub surface} = 610 deg. C, {integral}{sub T{sub s}}{sup T{sub c}} kdT = 34.7 W cm{sup -1}) la fraction des gaz degages est encore largement croissante apres 12 jours d'irradiation. De nombreuses observations ont ete recueillies sur la nature et la concentration des gaz rares presents en differents points du combustible irradie. (auteurs)

  15. Pile group program for full material modeling and progressive failure.

    Science.gov (United States)

    2008-12-01

    Strain wedge (SW) model formulation has been used, in previous work, to evaluate the response of a single pile or a group of piles (including its : pile cap) in layered soils to lateral loading. The SW model approach provides appropriate prediction f...

  16. 29 CFR 1926.603 - Pile driving equipment.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Pile driving equipment. 1926.603 Section 1926.603 Labor... Operations § 1926.603 Pile driving equipment. (a) General requirements. (1) Boilers and piping systems which are a part of, or used with, pile driving equipment shall meet the applicable requirements of the...

  17. 30 CFR 77.215-3 - Refuse piles: certification.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Refuse piles: certification. 77.215-3 Section... COAL MINES Surface Installations § 77.215-3 Refuse piles: certification. (a) Within 180 days following written notification by the District Manager that a refuse pile can present a hazard, the person owning...

  18. Interacting with piles of artifacts on digital tables

    NARCIS (Netherlands)

    Aliakseyeu, D.; Lucero Vera, A.A.; Subramanian, S.

    2007-01-01

    Designers and architects regularly use piles to organise visual artifacts. Recent efforts have now made it possible for users to create piles in digital systems as well. However, there is still little understanding of how users shouldinteract with digital piles. In this paper we investigate this

  19. Design Optimization of Piles for Offshore Wind Turbine Jacket Foundations

    DEFF Research Database (Denmark)

    Sandal, Kasper; Zania, Varvara

    Numerical methods can optimize the pile design. The aim of this study is to automatically design optimal piles for offshore wind turbine jacket foundations (Figure 1). Pile mass is minimized with constraints on axial and lateral capacity. Results indicate that accurate knowledge about soil...

  20. 30 CFR 77.215-1 - Refuse piles; identification.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Refuse piles; identification. 77.215-1 Section... COAL MINES Surface Installations § 77.215-1 Refuse piles; identification. A permanent identification marker, at least six feet high and showing the refuse pile identification number as assigned by the...

  1. 30 CFR 77.215-2 - Refuse piles; reporting requirements.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Refuse piles; reporting requirements. 77.215-2... COAL MINES Surface Installations § 77.215-2 Refuse piles; reporting requirements. (a) The proposed location of a new refuse pile shall be reported to and acknowledged in writing by the District Manager...

  2. 30 CFR 77.215 - Refuse piles; construction requirements.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Refuse piles; construction requirements. 77.215... COAL MINES Surface Installations § 77.215 Refuse piles; construction requirements. (a) Refuse deposited on a pile shall be spread in layers and compacted in such a manner so as to minimize the flow of air...

  3. Interacting with piles of artifacts on digital tables

    NARCIS (Netherlands)

    Aliakseyeu, D.; Subramanian, S.; Lucero Vera, A.A.; Gutwin, C.

    2006-01-01

    Designers and architects regularly use piles to organize visual artifacts. Recent efforts have now made it possible for users to create piles in digital systems as well. However, there is still little understanding of how users should interact with digital piles. In this paper we investigate this

  4. Tubular combustion

    CERN Document Server

    Ishizuka, Satoru

    2014-01-01

    Tubular combustors are cylindrical tubes where flame ignition and propagation occur in a spatially confined, highly controlled environment, in a nearly flat, elongated geometry. This allows for some unique advantages where extremely even heat dispersion is required over a large surface while still maintaining fuel efficiency. Tubular combustors also allow for easy flexibility in type of fuel source, allowing for quick changeover to meet various needs and changing fuel pricing. This new addition to the MP sustainable energy series will provide the most up-to-date research on tubular combustion--some of it only now coming out of private proprietary protection. Plentiful examples of current applications along with a good explanation of background theory will offer readers an invaluable guide on this promising energy technology. Highlights include: * An introduction to the theory of tubular flames * The "how to" of maintaining stability of tubular flames through continuous combustion * Examples of both small-scal...

  5. Advanced Combustion

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, Gordon R. [NETL

    2013-03-11

    The activity reported in this presentation is to provide the mechanical and physical property information needed to allow rational design, development and/or choice of alloys, manufacturing approaches, and environmental exposure and component life models to enable oxy-fuel combustion boilers to operate at Ultra-Supercritical (up to 650{degrees}C & between 22-30 MPa) and/or Advanced Ultra-Supercritical conditions (760{degrees}C & 35 MPa).

  6. Some particular aspects of control in nuclear power reactors; Quelques aspects particuliers du controle dans les piles atomiques de puissance

    Energy Technology Data Exchange (ETDEWEB)

    Furet, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Pupponi, J [Electricite de France (EDF), 75 - Paris (France)

    1964-07-01

    There are still many problems in the field of measurement and control of neutron flux. The present studies in connexion with high flux reactors contribute to the solution of these problems which concern specialists in reactor control. The present state of this investigation and the results of different studies carried out in France by the C A and the EDF are pointed out: A - In the nuclear instrumentation field, work is at present devoted to the technologies used to develop detectors and cables, which have to work at high temperature and in a high {gamma} background; fast electronic techniques are applied to fission counters to measure low neutron fluxes in a high {gamma} background (10 Rh). B - In the control and safety field, there is a real need for studies on the behaviour of reactors in the subcritical state. This increases the margin of security during restarts when poison effects must be overcome The perturbations due to control rod movements necessitate a new organisation of power level safety and control assemblies, in connexion with thermal or activation measurements. Two methods of fast start-up are described. They are related to the fission rate measurement as a function of time. This is done either continuously by a constant and high reactivity change, or step by step. The application of automatic techniques to detector motion seems to give the answer to control and safety in normal start-up. C - The scope of these studies covers the methods used for the control of E.D.F. 3, which are described. (authors) [French] La mesure et le controle du flux neutronique dans les piles de puissance posent encore de nombreux problemes. Les etudes actuellement entreprises dans le domaine des piles a haut flux, doivent apporter une contribution importante a la solution de ces problemes qui interessent les specialistes du controle des piles de puissance. On analyse l'etat actuel de ces etudes et on donne les resultats des differents travaux effectues en France, dans

  7. Heterogeneous dipolar theory of the exponential pile

    International Nuclear Information System (INIS)

    Mastrangelo, P.V.

    1981-01-01

    We present a heterogeneous theory of the exponential pile, closely related to NORDHEIM-SCALETTAR's. It is well adapted to lattice whose pitch is relatively large (D-2O, grahpite) and the dimensions of whose channels are not negligible. The anisotropy of neutron diffusion is taken into account by the introduction of dipolar parameters. We express the contribution of each channel to the total flux in the moderator by means of multipolar coefficients. In order to be able to apply conditions of continuity between the flux and their derivatives, on the side of the moderator, we develop in a Fourier series the fluxes found at the periphery of each channel. Using Wronski's relations of Bessel's functions, we express the multipolar coefficients of the surfaces of each channel, on the side of the moderator, by means of the harmonics of each flux and their derivatives. We retain only monopolar (A 0 sub(g)) and dipolar (A 1 sub(g)) coefficients; those of a higher order are ignored. We deduce from these coefficients the systems of homogeneous equations of the exponential pile with monopoles on their own and monopoles plus dipoles. It should be noted that the systems of homogeneous equations of the critical pile are contained in those of the exponential pile. In another article, we develop the calculation of monopolar and dipolar heterogeneous parameters. (orig.)

  8. Underwater noise generated by offshore pile driving

    NARCIS (Netherlands)

    Tsouvalas, A.

    2015-01-01

    Anthropogenic noise emission in the marine environment has always been an environmental issue of serious concern. In particular, the noise generated during the installation of foundation piles is considered to be one of the most significant sources of underwater noise pollution. This is mainly

  9. Full size testing of sheet pile walls

    NARCIS (Netherlands)

    Kuilen, J.W.G. van de; Linden, M.L.R. van der; Katsma, H.; Stolle, P.

    1996-01-01

    Azobé (Lophira alata) is widely used in timber sheet pile walls in the Netherlands. The boards in these walls are coupled and therefore load-sharing can be expected. A simulation model based on the finite element method DIANA (DIANA, 1992) was developed and load-sharing could be calculated. To check

  10. Literature review Quasi-static and Dynamic pile load tests : Primarily report on non-static pile load tests

    NARCIS (Netherlands)

    Huy, N.Q.

    2010-01-01

    Pile testing, which plays an importance role in the field of deep foundation design, is performed by static and non-static methods to provide information about the following issues: (Poulos, 1998) - The ultimate capacity of a single pile. - The load-displacement behavior of a pile. - The performance

  11. Friction effects on lateral loading behavior of rigid piles

    DEFF Research Database (Denmark)

    Zania, Varvara; Hededal, Ole

    2012-01-01

    taking into account the shear frictional resistance along the pile. For this purpose efficient three dimensional finite element models of different diameter have been developed. The increase of the side friction and of the diameter of the pile is shown to alter the failure pattern and increase...... the lateral capacity of the pile. The obtained p - y curves demonstrate the importance of the aforementioned parameters in the design of rigid piles, as the reduction of friction along the interface reduces not only the ultimate load but also the stiffness of the soil-pile response. Read More: http...

  12. The Settlement Behavior of Piled Raft Interaction in Undrained Soil

    DEFF Research Database (Denmark)

    Ghalesari, Abbasali Taghavi; Barari, Amin; Amini, Pedram Fardad

    2013-01-01

    Offshore piled raft foundations are one of the most commonly used foundations in offshore structures. When a raft foundation alone does not satisfy the design requirements, the addition of piles may improve both the ultimate load capacity and the settlement performance of the raft. In this paper......, the behavior of a piled raft on undrained soil is studied based on a series of parametric studies on the average and differential settlement of piled raft using three-dimensional finite element analysis. The settlement behavior is found to be dependent on the number of piles and raft thickness....

  13. The Use of Fuel Gas as Stripping Medium in Atmospheric Distillation of Crude Oil L’utilisation de gaz combustible comme moyen d’extraction des fractions légères en distillation atmosphérique du pétrole brut

    Directory of Open Access Journals (Sweden)

    Plellis-Tsaltakis C.

    2011-09-01

    Full Text Available Stripping of petroleum fractions aims to remove the light ends that spoil some of their properties, such as the flash point. Stripping usually employs steam for that purpose. Except for steam, other substances can perform the same function, among them light hydrocarbons. In this article, we investigate the use of refinery fuel gas as stripping medium for a crude oil atmospheric distillation unit. L’extraction des fractions légères du pétrole vise à enlever les produits nuisibles à certaines propriétés comme le point d’éclair. Cette opération utilise habituellement de la vapeur d’eau. D’autres substances peuvent remplir la même fonction, comme les hydrocarbures légers. Dans cet article, on étudie l’utilisation du gaz combustible de la raffinerie comme moyen d’extraction des fractions légères dans une unité de distillation atmosphérique.

  14. Integrity and As-built capacity of bored pile group

    International Nuclear Information System (INIS)

    Shaw, D.E.; Kissenpfennig, J.F.; Huemmer, M.R.

    1983-01-01

    This paper discusses the application of statistical methods to the reliability evaluation of cast-in-place concrete piles. The difficulties associated with pile construction can lead to larger uncertainties than would be associated with normal reinforced concrete structures both due to uncertainty in concrete quality and end bearing capacity. These uncertainties can be dealt with through the use of statistical methods. A statistical model of an individual pile is formulated along with a methodology for determining necessary statistical parameters from results of concrete batch tests, core strength tests and visual logs, sonic geophysical testing methods, and proof tests. Strength models for both static vertical and seismic horizontal loadings are discussed. The overall safety of a pile foundation is dependent upon the distribution of individual pile strength as well as the additional reliability due to the use of a large number of parallel load paths provided by a pile group foundation. The paper presents a mechanical model of global pile behavior which accounts for individual pile ductility along with the possibility of redistribution of loads from weaker to stronger piles. The use of the Monte Carlo method to determine the overall reliability of the pile foundation is discussed. Numerical results for both individual pile behavior as well as overall foundation behavior are presented. (orig.)

  15. Thermomechanical Behavior of Energy Pile Embedded in Sandy Soil

    Directory of Open Access Journals (Sweden)

    Xu Huang

    2018-01-01

    Full Text Available The traditional energy pile (solid energy pile has been implemented for decades. However, the design of different kinds of energy piles is still not well understood. In this study, a series of model tests were performed on an aluminum pipe energy pile (PEP in dry sandy soil to investigate the thermal effects on the mechanical behaviors of pipe energy pile. The thermal responses of the PEP were also analyzed. Steady temperatures of the PEP under different working conditions were also compared with that of the solid energy pile. Different loading tests were carried out on four pipe energy piles under three different temperatures of 5, 35, and 50°C, respectively. The bearing capacity change can be interpreted through the load-displacement curves. Experiment results were also compared with the solid energy pile to evaluate bearing capacities of the PEP and the solid energy pile under different temperature conditions. The mobilized shaft resistance was also calculated and compared with the solid energy pile data and the results show that the PEP has a similar load transfer mechanism with the solid energy pile. It could also be found that, for PEPs under working load, plastic displacement would appear after a whole heating cycle.

  16. Fast neutron flux in heavy water reactors; Flux de neutrons rapides dans les piles a eau lourde

    Energy Technology Data Exchange (ETDEWEB)

    Brisbois, J; Katz, S [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Fontenay-aux-Roses, 92 (France)

    1966-07-01

    The possibility of calculating the fast neutron flux in a natural uranium-heavy water lattice by superposition of the individual contributions of the different fuel elements was verified using a one-dimension Monte-Carlo code. The results obtained are in good agreement with experimental measurements done in the core and reflector of the reactor AQUILON. (author) [French] La possibilite de calculer le flux de neutrons rapides dans un reseau d'uranium naturel a eau lourde par superposition des apports des divers barreaux, a ete verifiee en utilisant un code Monte-Carlo monodimensionel. Les resultats obtenus concordent avec des mesures experimentales effectuees dans le coeur et reacteur de la pile Aquilon. (auteurs)

  17. Starting up a programme of atomic piles using compressed gas

    International Nuclear Information System (INIS)

    Horowitz, J.; Yvon, J.

    1959-01-01

    1) An examination of the intellectual and material resources which have directed the French programme towards: a) the natural uranium and plutonium system, b) the use of compressed gas as heat transfer fluid (primary fluid). 2) The parts played in exploring the field by the pile EL2 and G1, EL2 a natural uranium, heavy water and compressed gas pile, G1 a natural uranium, graphite and atmospheric air pile. 3) Development of the neutronics of graphite piles: physical study of G1. 4) The examination of certain problem posed by centres equipped with natural uranium, graphite and compressed carbon dioxide piles: structure, special materials, fluid circuits, maximum efficiency. Economic aspects. 5) Aids to progress: a) piles for testing materials and for tests on canned fuel elements, b) laboratory and calculation facilities. 6) Possible new orientations of compressed gas piles: a) raising of the pressure, b) enriched fuel, c) higher temperatures, d) use of heavy water. (author) [fr

  18. The Tensile Capacity Of Bored Piles In Frictional Soils

    DEFF Research Database (Denmark)

    Krabbenhøft, Sven; Andersen, Allan; Damkilde, Lars

    2008-01-01

    Three series of 10 piles each were installed in two different locations. The length of the piles varied from 2 to 6 m and the diameters were 14 and 25 cm. The piles were constructed above the groundwater table using continuous flight augers and the concrete was placed by gravity free fall. The pi....... The piles were tested to failure in axial uplift and the load-displacement relations were recorded.......Three series of 10 piles each were installed in two different locations. The length of the piles varied from 2 to 6 m and the diameters were 14 and 25 cm. The piles were constructed above the groundwater table using continuous flight augers and the concrete was placed by gravity free fall...

  19. Design of the fuel element 'snow-flake' in uranium oxide, canned with aluminium, for the experimental reactor EL 3 (1960); Etude d'un element combustible en oxyde d'uranium gaine d'aluminium, type ''cristal de neige'' pour la pile EL 3 (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Gauthron, M; Guibert, B [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    This report sums up the main studies have been carried out on the fuel element 'Snowflake' (uranium oxide, canned with aluminium), designed to replace the present element of the experimental reactor EL3 in order to increase the reactivity without modifying the neutron flux/thermal power ratio. (author) [French] Ce rapport resume les principales etudes qui ont ete faites sur l'element combustible 'Cristal de Neige' (a oxyde d'uranium, gaine d'aluminium) destine a remnlacer l'element actuel du reacteur experimental EL3, afin d'en augmenter la reactivite sans modifier le rapport flux neutronique-puissance thermique. (auteur)

  20. Full Scale Model Test of Consolidation Acceleration on Soft Soil deposition with Combination of Timber Pile and PVD (Hybrid Pile)

    OpenAIRE

    Sandyutama, Y.; Samang, L.; Imran, A. M.; Harianto4, T.

    2015-01-01

    This research aims to analyze the effect of composite pile-PVD (hybrid pile) as the reinforcement in embankment on soft soil by the means of numerical simulation and Full-Scale Trial Embankment. The first phase cunducted by numerical analysis and obtained 6-8 meters hybrid pile length effective. Full-Scale trial embankment. was installed hybrid pile of 6 m and preloading of 4,50 height. Full-scale tests were performed to investigate the performances of Hybrid pile reinforcement. This research...

  1. Study of the fluctuations in neutrons density in a homogeneous plutonium pile; Etude de la fluctuation de la population de neutrons sur une pile homogene au plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Clouet d' Orval, C; Deilgat, E; Labbe, J; Molbert, M; Tachon, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1962-07-01

    The variations in neutron density in the centre of a reactor core are subjected to a statistical fluctuation phenomenon. Because of the correlations existing between the neutrons, their distribution does not follow Poisson's law. It diverges from it by a quantity depending on various parameter such as the lifetime and the effective fraction of the slowed-down neutrons. Experiments have been carried out designed to demonstrate this divergence and also, more particularly, the correlation between unaffected and slowed-down neutrons; these have been carried out with the help of the reactor 'Proserpine', a critical homogeneous plutonium assembly. (author) [French] L'evolution de la population neutronique au sein d'un milieu multiplicateur est soumise a un phenomene de fluctuations statistiques. En raison des correlations qui existent entre les neutrons, leur distribution ne suit pas une loi de Poisson. Elle s'en ecarte d'une quantite qui depend de divers parametres tels que le temps de vie, la proportion effective des neutrons retardes. Des experiences, destinees a mettre en evidence cet ecart, et plus particulierement les correlations entre neutrons prompts et neutrons retardes, ont ete realisees a l'aide de la pile 'Proserpine', experience critique homogene au plutonium. (auteur)

  2. Prevention of spontaneous combustion in coal stockpiles : Experimental results in coal storage yard

    NARCIS (Netherlands)

    Fierro, V.; Miranda, J.L.; Romero, C.; Andrés, J.M.; Arriaga, A.; Schmal, D.; Visser, G.H.

    1999-01-01

    The spontaneous ignition of coal stockpiles is a serious economic and safety problem. This paper deals with oxidation and spontaneous combustion of coal piles laid in coal storage yard and the measures to avoid the heat losses produced. Investigations on self heating were carried out with five test

  3. A computational model of pile vertical vibration in saturated soil based on the radial disturbed zone of pile driving

    International Nuclear Information System (INIS)

    Li Qiang; Shi Qian; Wang Kuihua

    2010-01-01

    In this study, a simplified computational model of pile vertical vibration was developed. The model was based on the inhomogeneous radial disturbed zone of soil in the vicinity of a pile disturbed by pile driving. The model contained two regions: the disturbed zone, which was located in the immediate vicinity of the pile, and the undisturbed region, external to the disturbed zone. In the model, excess pore pressure in the disturbed zone caused by pile driving was assumed to follow a logarithmic distribution. The relationships of stress and strain in the disturbed zone were based on the principle of effective stress under plain strain conditions. The external zone was governed by the poroelastic theory proposed by Biot. With the use of a variable separation method, an analytical solution in the frequency domain was obtained. Furthermore, a semi-analytical solution was attained by employing a numerical convolution method. Numerical results from the frequency and time domain indicated that the equivalent radius of the disturbed zone and the ratio of excess pore pressure had a significant effect on pile dynamic response. However, actual interactions between pile and soil will be weaker due to the presence of the radial disturbed zone, which is caused by pile driving. Consequently, the ideal undisturbed model overestimates the interaction between pile and soil; however, the proposed model reflects the interaction of pile and soil better than the perfect contact model. Numerical results indicate that the model can account for the time effect of pile dynamic tests.

  4. 3D FEM Analysis of a Pile-Supported Riverine Platform under Environmental Loads Incorporating Soil-Pile Interaction

    Directory of Open Access Journals (Sweden)

    Denise-Penelope N. Kontoni

    2018-01-01

    Full Text Available An existing riverine platform in Egypt, together with its pile group foundation, is analyzed under environmental loads using 3D FEM structural analysis software incorporating soil-pile interaction. The interaction between the transfer plate and the piles supporting the platform is investigated. Two connection conditions were studied assuming fixed or hinged connection between the piles and the reinforced concrete platform for the purpose of comparison of the structural behavior. The analysis showed that the fixed or hinged connection condition between the piles and the platform altered the values and distribution of displacements, normal force, bending moments, and shear forces along the length of each pile. The distribution of piles in the pile group affects the stress distribution on both the soil and platform. The piles were found to suffer from displacement failure rather than force failure. Moreover, the resulting bending stresses on the reinforced concrete plate in the case of a fixed connection between the piles and the platform were almost doubled and much higher than the allowable reinforced concrete stress and even exceeded the ultimate design strength and thus the environmental loads acting on a pile-supported riverine offshore platform may cause collapse if they are not properly considered in the structural analysis and design.

  5. Are cometary nuclei primordial rubble piles?

    Science.gov (United States)

    Weissman, P. R.

    1986-01-01

    Whipple's icy conglomerate model for the cometary nucleus has had considerable sucess in explaining a variety of cometary phenomena such as gas production rates and nongravitational forces. However, as discussed here, both observational evidence and theoretical considerations suggest that the cometary nucleus may not be a well-consolidated single body, but may instead be a loosely bound agglomeration of smaller fragments, weakly bonded and subject to occasional or even frequent disruptive events. The proposed model is analogous to the 'rubble pile' model suggested for the larger main-belt asteroids, although the larger cometary fragments are expected to be primordial condensations rather than collisionally derived debris as in the asteroid case. The concept of cometary nuclei as primordial rubble piles is proposed as a modification of the basic Whipple model, not as a replacement for it.

  6. Concentration processes under tubesheet sludge piles in nuclear steam generators

    International Nuclear Information System (INIS)

    Gonzalez, F.; Spekkens, P.

    1987-01-01

    The process by which bulk water solutes are concentrated under tubesheet sludge piles in nuclear steam generators was investigated in the laboratory under simulated CANDU operating conditions. Concentration rates were found to depend on the tube heat flux and pile depth, although beyond a critical depth the concentration efficiency decreased. This efficiency could be expressed by a concentration coefficient, and was found to depend also on the sludge pile porosity. Solute concentration profiles in the sludge pile suggested that the concentration mechanism in a high-porosity/permeability pile is characterized by boiling mainly near or at the tube surface, while in low-porosity piles, the change of phase may also become important in the body of the sludge pile. In all cases, the full depth of the pile was active to some extent in the concentration process. As long as the heat transfer under the pile was continued, the solute remained under the pile and slowly migrated toward the bottom. When the heat transfer was stopped, the solute diffused back into the bulk solution at a rate slower than that of the concentration process

  7. Review of vibration effect during piling installation to adjacent structure

    Science.gov (United States)

    Rahman, Nurul Aishah Abd; Musir, Adhilla Ainun; Dahalan, Nurol Huda; Ghani, Abdul Naser Abdul; Khalil, Muhamad Kasimi Abd

    2017-12-01

    Basically, many major structures across the world such as towers, high rise building, houses and bridges utilize pile as a support material. The use of pile is important to strengthen the structures. However, this has led to another problem to the nearest surrounding structures resulted from pile driving. As part of a construction work, unavoidable pile driving activity generates a vibration towards the surrounding structures if uncontrolled may cause damage to the adjacent structure. As the current construction works are frequently located in urban areas where the distance between the nearest building structures is not far, vibration may cause damage to nearby structures. Knowing which part of the building that is mostly affected by various vibration patterns from the impact of pile driving is crucial. Thus, it is very important to predict the impact of vibration during piling installation work. This paper reviews the vibrations generated by piling activity toward surrounding structures in terms sources of vibration, impact of piling installation, pile-soil interaction, and factors affecting the vibration impact of building as well as to study the parameters involved in vibration generation during piling works.

  8. Interesting Developments in Testing Methods Applied to Foundation Piles

    Science.gov (United States)

    Sobala, Dariusz; Tkaczyński, Grzegorz

    2017-10-01

    Both: piling technologies and pile testing methods are a subject of current development. New technologies, providing larger diameters or using in-situ materials, are very demanding in terms of providing proper quality of execution of works. That concerns the material quality and continuity which define the integral strength of pile. On the other side we have the capacity of the ground around the pile and its ability to carry the loads transferred by shaft and pile base. Inhomogeneous nature of soils and a relatively small amount of tested piles imposes very good understanding of small amount of results. In some special cases the capacity test itself form an important cost in the piling contract. This work presents a brief description of selected testing methods and authors remarks based on cooperation with Universities constantly developing new ideas. Paper presents some experience based remarks on integrity testing by means of low energy impact (low strain) and introduces selected (Polish) developments in the field of closed-end pipe piles testing based on bi-directional loading, similar to Osterberg idea, but without sacrificial hydraulic jack. Such test is suitable especially when steel piles are used for temporary support in the rivers, where constructing of conventional testing appliance with anchor piles or kentledge meets technical problems. According to the author’s experience, such tests were not yet used on the building site but they bring a real potential especially, when the displacement control can be provided from the river bank using surveying techniques.

  9. Laterally Loaded Partially Prestressed Concrete Piles

    Science.gov (United States)

    1989-09-01

    of an extensive test program onl laterali y ioadeu. partially pr- estressed concrete fender piles. The study Included service load range as well ats...12,000-psi design strength). Configura- tion G utilized 14 r:- estress strand, in an unsymmetric pattern. To provide a uniform concrete prestress of 540...sudden loss in load carrying capacity directly related to the loss of concrete area. The compression concrete fractured longitudinally and along the

  10. CENTRIFUGAL VIBRATION TEST OF RC PILE FOUNDATION

    Science.gov (United States)

    Higuchi, Shunichi; Tsutsumiuchi, Takahiro; Otsuka, Rinna; Ito, Koji; Ejiri, Joji

    It is necessary that nonlinear responses of structures are clarified by soil-structure interaction analysis for the purpose of evaluating the seismic performances of underground structure or foundation structure. In this research, centrifuge shake table tests of reinforced concrete pile foundation installed in the liquefied ground were conducted. Then, finite element analyses for the tests were conducted to confirm an applicability of the analytical method by comparing the experimental results and analytical results.

  11. Horizontal vibrations of piles in a centrifuge

    International Nuclear Information System (INIS)

    Bourdin, B.

    1987-01-01

    The aim of the thesis is the study of soil dynamics for important structures like nuclear power plants, offshore platforms, dams etc. Experimental results of horizontal vibrations on a pile partially anchored in a soil scale model put into a centrifuge are presented. Mechanical similitude conditions from equilibrium equations or rheologic laws are described. After a description of testing equipment (centrifuge, electrodynamic excitator) experimental results are interpreted with a model. Non-linearities on frequency response curves are characterized [fr

  12. FORECASTING PILE SETTLEMENT ON CLAYSTONE USING NUMERICAL AND ANALYTICAL METHODS

    Directory of Open Access Journals (Sweden)

    Ponomarev Andrey Budimirovich

    2016-06-01

    Full Text Available In the article the problem of designing pile foundations on claystones is reviewed. The purpose of this paper is comparative analysis of the analytical and numerical methods for forecasting the settlement of piles on claystones. The following tasks were solved during the study: 1 The existing researches of pile settlement are analyzed; 2 The characteristics of experimental studies and the parameters for numerical modeling are presented, methods of field research of single piles’ operation are described; 3 Calculation of single pile settlement is performed using numerical methods in the software package Plaxis 2D and analytical method according to the requirements SP 24.13330.2011; 4 Experimental data is compared with the results of analytical and numerical calculations; 5 Basing on these results recommendations for forecasting pile settlement on claystone are presented. Much attention is paid to the calculation of pile settlement considering the impacted areas in ground space beside pile and the comparison with the results of field experiments. Basing on the obtained results, for the prediction of settlement of single pile on claystone the authors recommend using the analytical method considered in SP 24.13330.2011 with account for the impacted areas in ground space beside driven pile. In the case of forecasting the settlement of single pile on claystone by numerical methods in Plaxis 2D the authors recommend using the Hardening Soil model considering the impacted areas in ground space beside the driven pile. The analyses of the results and calculations are presented for examination and verification; therefore it is necessary to continue the research work of deep foundation at another experimental sites to improve the reliability of the calculation of pile foundation settlement. The work is of great interest for geotechnical engineers engaged in research, design and construction of pile foundations.

  13. High Combustion Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — At NETL's High-Pressure Combustion Research Facility in Morgantown, WV, researchers can investigate new high-pressure, high-temperature hydrogen turbine combustion...

  14. Combustion Research Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Combustion Research Laboratory facilitates the development of new combustion systems or improves the operation of existing systems to meet the Army's mission for...

  15. Reheating experiment in the 35-ton pile

    International Nuclear Information System (INIS)

    Cherot, J.; Girard, Y.

    1957-01-01

    When the 35-ton pile was started up it was necessary for us, in order to study certain effects (xenon for example), to know the anti reactivity value of the rods as a function of their dimensions. We have made use of the possibility, in the reheating experiment, of raising the temperature of the graphite-uranium block by simple heating, in order to determine the anti reactivity curves of the rods, and from that the overall temperature coefficient. For the latter we have considered two solutions: first, one in which the average temperature of the pile is defined as our arithmetical mean of the different values given by the 28 thermocouples distributed throughout the pile; a second in which the temperature in likened to a poisoning and is balanced by the square of the flux. The way in which the measurements have been made is indicated, and the different instruments used are described. The method of reheating does not permit the separation of the temperature coefficients of uranium and of graphite. The precision obtained is only moderate, and suffers from the changes of various parameters necessary to other manipulations carried out simultaneously (life time modulators for example), and finally it is a function of the comparatively restricted time allowed. It is evident of course that more careful stabilisation at the different plateaux chosen would have necessitated long periods of reheating. (author) [fr

  16. Stability Limits for Rubble Pile Asteroid Shapes

    Science.gov (United States)

    Scheeres, Daniel

    2018-04-01

    The stability of rubble pile asteroids are explored analytically, using simple models for their constituent components. Specifically, we look at the stability of spherical components resting and potentially rolling on each other as a function of their relative sizes, configuration and number. This talk will present some recent results in this problem. Of specific interest is a 5:1 limit on the elongation of a rubble pile body for stability, which is interestingly the same extreme elongation found for the first interstellar object. This limit is for a rubble pile consisting of stacked spheres, resting on each other in a straight line. If there are 5 or less bodies resting on each other in this configuration, there is an interval of spin rates for which the configuration is stable. If there are 6 or more bodies stacked as such, the spin rate for it to stabilize is beyond the spin rate at which it fissions. The talk will also explore additional results for different configurations of bodies resting on each other.

  17. Geomorphic reclmation of a coal refuse pile

    Science.gov (United States)

    Hopkinson, L. C.; Quaranta, J.

    2017-12-01

    Geomorphic reclamation is a technique that may offer opportunities to improve mine reclamation in Central Appalachia. The design approach is based on constructing a steady-state, mature landform condition and takes into account the long-term climatic conditions, soil types, terrain grade, and vegetation. Geomorphic reclamation has been applied successfully in semi-arid regions but has not yet been applied in Central Appalachia. This work describes a demonstration study where geomorphic landforming techniques are being applied to a coarse coal refuse pile in southern West Virginia, USA. The reclamation design includes four geomorphic watersheds that radially drain runoff from the pile. Each watershed has one central draining channel and incorporates compound slope profiles similarly to naturally eroded slopes. Planar slopes were also included to maintain the impacted area. The intent is to alter the hydrology to decrease water quality treatment costs. The excavation cut and fill volumes are comparable to those of more conventional refuse pile reclamation designs. If proven successful then this technique can be part of a cost-effective solution to improve water quality at active and future refuse facilities, abandoned mine lands, bond forfeiture sites, landfills, and major earthmoving activities within the region.

  18. Design of the fuel element 'snow-flake' in uranium oxide, canned with aluminium, for the experimental reactor EL 3 (1960); Etude d'un element combustible en oxyde d'uranium gaine d'aluminium, type ''cristal de neige'' pour la pile EL 3 (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Gauthron, M.; Guibert, B. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    This report sums up the main studies have been carried out on the fuel element 'Snowflake' (uranium oxide, canned with aluminium), designed to replace the present element of the experimental reactor EL3 in order to increase the reactivity without modifying the neutron flux/thermal power ratio. (author) [French] Ce rapport resume les principales etudes qui ont ete faites sur l'element combustible 'Cristal de Neige' (a oxyde d'uranium, gaine d'aluminium) destine a remnlacer l'element actuel du reacteur experimental EL3, afin d'en augmenter la reactivite sans modifier le rapport flux neutronique-puissance thermique. (auteur)

  19. Direct numerical simulation of two-phases turbulent combustion: application to study of propagation and structure of flames; Simulation numerique directe de la combustion turbulente diphasique: application a l'etude de la propagation et de la structure des flammes

    Energy Technology Data Exchange (ETDEWEB)

    Canneviere, K.

    2003-12-15

    This work is devoted to the study of the propagation and the structure of two-phases turbulent flames. To this end, Direct Numerical Simulations (DNS) are used. First, numerical systems for two-phases flow simulations is presented along with a specific chemical model. Then, a study of laminar spray flames is carried out. An analytical study related to the dynamics of evaporation of droplets is first proposed where the influence on the equivalence ratio of the ratio between the heating delay of the droplet and the evaporation delay is detailed. The simulation of a propagating flame through a cloud of droplets is carried out and a pulsating behavior is highlighted. A study of these flames according to the topology of liquid fuel enabled us to characterize a double flame structure composed of a premixed flame and a diffusion flame. Our last study is devoted to spray turbulent flames. Two-phase combustion of turbulent jets has been simulated. By varying the spray injection parameters (density, equivalence ratio), a database has been generated. This database allowed us to describe local and global flame regimes appearing in the combustion of sprays. They have been categorized in four main structures: open and closed external regime, group combustion and mixed combustion. Eventually, a combustion diagram has been developed. It involves the spray vaporization time, the mean inter-space between droplets or group of droplets and eventually the injected equivalence ratio. (author)

  20. Calculation of control rods in rectangular reactor, and applications (1960); Calcul des barres de conteole dans un reacteur rectangulaire et applications (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Goshen, S; Pazy, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The aim of this report is to find a method for estimating the anti-reactivity of control rods perpendicular to the axis in a cylindrical pile. The paper is divided into two parts. In the first is given a method of calculating control rods in a rectangular pile, similar to the Nordheim-Scalettar method for cylindrical piles. As an example the formulas are given for the theories of one and two neutron groups, the generalisation for several groups being evident. In the second part we find by a variation method a formula for estimating the Laplacian of a pile, which may be divided into parallelepipeds for which the Laplacian are given. Finally, this formula is used to calculate the anti-reactivity of rods perpendicular to the axis in a cylindrical pile. (author) [French] Le but de ce rapport est de trouver une methode pour estimer l'antireactivite des barres de controle perpendiculaires a l'axe dans pile cylindrique. Le rapport se divise en deux parties. Dans la premiere nous donnons une methode de calcul des barres de controle dans une pile rectangulaire, analogue a la methode de Nordheim-Scalettar pour les piles cylindriques. A titre d'exemple, nous donnons les formules de theories a un et deux groupes de neutrons, la generalisation pour plusieurs groupes est evidente. Dans la deuxieme partie, nous trouvons, par une methode de variation, une formule qui permet d'estimer le laplacien d'une pile, qui peut etre divisee en parallelepipedes dont les laplaciens sont donnes. Nous utilisons enfin, cette formule pour calculer l'antireactivite des barres perpendiculaires a l'axe dans une pile cylindrique. (auteur)

  1. Investigations in French battery and recycling plants; Traitement des dechets des piles et accumulateurs usages. Enquete dans des entreprises specialisees

    Energy Technology Data Exchange (ETDEWEB)

    Peltier, A.; Elcabache, J.M. [Institut National de Recherche et de Securite -INRS, Lab. de Chimie Analytique Minerale, Dept. Metrologie des Polluants, Centre de Lorraine, 54 - Vandoeuvre (France)

    2003-07-01

    The Analytical Chemistry laboratory of INRS assessed the occupational exposure of 380 employees in 15 enterprises specialized in the reprocessing of electrochemical generators accepting to take part in this study (2 firms sorting and preparing batteries for shipment to reprocessing centres, 7 recycling plants for alkaline, nickel-cadmium and zinc-carbon batteries, 5 spent lead accumulator processing plants). Assessments were also carried out in an enterprise with a workforce of 180 producing 'mercury free' zinc-carbon batteries. These assessments highlighted: - a high potential risk of lead impregnation in the milling and fusion phases of spent lead accumulator processing; - a potential risk of mercury intoxication during the use of pyrometallurgical processes allowing other mercury waste products to be processed simultaneously to spent batteries; - that during the processing of nickel-cadmium batteries the air cleaning systems of the workshops are largely inefficient and must be improved. The constant wearing of filtering respirators is a solution that must remain temporary, the prevention measure to be applied as early as possible being the capture of the cadmium dust fume emissions at source. (authors)

  2. Combustion chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Brown, N.J. [Lawrence Berkeley Laboratory, CA (United States)

    1993-12-01

    This research is concerned with the development and use of sensitivity analysis tools to probe the response of dependent variables to model input variables. Sensitivity analysis is important at all levels of combustion modeling. This group`s research continues to be focused on elucidating the interrelationship between features in the underlying potential energy surface (obtained from ab initio quantum chemistry calculations) and their responses in the quantum dynamics, e.g., reactive transition probabilities, cross sections, and thermal rate coefficients. The goals of this research are: (i) to provide feedback information to quantum chemists in their potential surface refinement efforts, and (ii) to gain a better understanding of how various regions in the potential influence the dynamics. These investigations are carried out with the methodology of quantum functional sensitivity analysis (QFSA).

  3. Response of shallow geothermal energy pile from laboratory model tests

    Science.gov (United States)

    Marto, A.; Amaludin, A.

    2015-09-01

    In shallow geothermal energy pile systems, the thermal loads from the pile, transferred and stored in the soil will cause thermally induced settlement. This factor must be considered in the geotechnical design process to avoid unexpected hazards. Series of laboratory model tests were carried out to study the behaviour of energy piles installed in kaolin soil, subjected to thermal loads and a combination of axial and thermal loads (henceforth known as thermo-axial loads). Six tests which included two thermal load tests (35°C and 40°C) and four thermo-axial load tests (100 N and 200 N, combined with 35°C and 40°C thermal loads) were conducted. To simulate the behaviour of geothermal energy piles during its operation, the thermo-axial tests were carried out by applying an axial load to the model pile head, and a subsequent application of thermal load. The model soil was compacted at 90% maximum dry density and had an undrained shear strength of 37 kPa, thus classified as having a firm soil consistency. The behaviour of model pile, having the ultimate load capacity of 460 N, was monitored using a linear variable displacement transducer, load cell and wire thermocouple, to measure the pile head settlement, applied axial load and model pile temperature. The acquired data from this study was used to define the thermo-axial response characteristics of the energy pile model. In this study, the limiting settlement was defined as 10% of the model pile diameter. For thermal load tests, higher thermal loads induced higher values of thermal settlement. At 40°C thermal load an irreversible settlement was observed after the heating and cooling cycle was applied to the model pile. Meanwhile, the pile response to thermo-axial loads were attributed to soil consistency and the magnitude of both the axial and thermal loads applied to the pile. The higher the thermoaxial loads, the higher the settlements occurred. A slight hazard on the model pile was detected, since the settlement

  4. Contribution to the study of influence of hydrodynamic conditions on the combustion of a preliminary mixture in a enclosed medium; Contribution a l`etude de l`influence des conditions hydrodynamiques sur la combustion d`un melange prealable dans un milieu confine

    Energy Technology Data Exchange (ETDEWEB)

    Henry, J.D.

    1996-02-01

    This thesis is a study on the internal combustion of a pistons engine. the first chapter is devoted to the description of the experimental device and measurement means. The combustion chamber is described with its adaptation to new experimental conditions. The second chapter concerns the diagnosis means to interpret the hydrodynamic conditions by the cross checking of displays with the measures of flow speed by laser velocimetry. The third chapter gives the result of analysis on the process of the birth of a turbulent flow in a whirl movement. The study of the electric spark and the initial phase of the combustion, in media with or without movement, is in the last chapter. (N.C.)

  5. Impedance function of a group of vertical piles

    International Nuclear Information System (INIS)

    Wolf, J.P.; Arx, G.A. von

    1978-01-01

    Impedance and transfer functions of a group of vertical piles located in any desired configuration in plan in a horizontally stratified soil layer are derived. Hysteretic and radiation damping are accounted for. The method separates the piles and the soil, introducing unknown interaction forces. The total flexibility matrix of the soil is constructed, superposing the (complex) flexibility coefficients caused by the interaction forces of a single pile only. The dependence of the impedance and transfer functions on the oscllating frequency for foundations with different numbers of piles is investigated. Pile-soil-pile interaction is shown to be very important for all modes of vibration. The procedure is used in the seismic analysis of a reactor building. (Author)

  6. Analytical out-of-pile and in-pile experiments on gadolinia bearing fuels

    International Nuclear Information System (INIS)

    Bruet, M.; Francois, B.; Do, Q.; Bergeron, J.; Trotabas, M.

    1986-06-01

    New fuel management schemes in PWRs can be achieved through the use of burnable poisons like gadolinia bearing fuel rods. However, the introduction of such a design has required a qualification program, which has been performed in collaboration between CEA, FRAGEMA and/or FRAMATOME by specialized teams in CEA facilities. The main scoops of this program concern: the fabrication process; the out of pile physical properties determination: the in pile thermomechanical behaviour and fission product release; the neutronic studies in view to validate the Computed Gd efficiency and the LBP depletion calculation schemes and to analyse and assess various schemes of core calculations

  7. Assessment of Time Functions for Piles Driven in Clay

    DEFF Research Database (Denmark)

    Augustesen, Anders; Andersen, Lars; Sørensen, Carsten Steen

    The vertical bearing capacity of piles situated in clay is studied with regard to the long-term set-up. A statistical analysis is carried out on the basis of data from numerous static loading tests. The database covers a wide range of both soil and pile properties, which ensures a general....... Hence, it is suggested that a constant set-up factor should be applied for the prediction of pile capacities at a given time after initial driving....

  8. Characteristics of thermal neutron calibration fields using a graphite pile

    International Nuclear Information System (INIS)

    Uchita, Yoshiaki; Saegusa, Jun; Kajimoto, Yoichi; Tanimura, Yoshihiko; Shimizu, Shigeru; Yoshizawa, Michio

    2005-03-01

    The Facility of Radiation Standards of Japan Atomic Energy Research Institute is equipped with thermal neutron fields for calibrating area and personal neutron dosemeters. The fields use moderated neutrons leaked from a graphite pile in which radionuclide sources are placed. In January 2003, we have renewed the pile with some modifications in its size. In accordance with the renewal, we measured and calculated thermal neutron fluence rates, neutron energy distributions and angular distributions of the fields. The thermal neutron fluence rates of the ''inside-pile fields'' and the outside-pile fields'' were determined by the gold foil activation method. The neutron energy distributions of the outside-pile fields were also measured with the Bonner multi-sphere spectrometer system. The contributions of epithermal and fast neutrons to the total dose-equivalents were 9% in the southern outside-pile field and 12% in the western outside-pile field. The personal dose-equivalents, H p,slab (10, α), in the outside-pile fields are evaluated by considering the calculated angular distributions of incoming neutrons. The H p,slab (10, α) was found to be about 40% higher than the value in assuming the unidirectional neutron between the pile and the test point. (author)

  9. Nanoindentation-induced pile-up in hydrogenated amorphous silicon

    International Nuclear Information System (INIS)

    Pantchev, B; Danesh, P; Wiezorek, J; Schmidt, B

    2010-01-01

    Nanoindentation-induced material extrusion around the nanoindent (pile-up) leads to an overestimation of elastic modulus, E, and nanohardness, H, when the test results are evaluated using the Oliver and Pharr method. Factors affecting the pile-up during testing are residual stresses in film and ratio of film and substrate mechanical properties. Nanoindentation of hydrogenated amorphous silicon (a-Si:H) films has been carried out with the aim to study the effect of residual compressive stress on the pile-up in this material. To distinguish the contribution of compressive stress to the appearance of pile-up ion implantation has been used as a tool, which reduces the compressive stress in a-Si:H. Scanning probe microscope has been used for the imaging of the indent and evaluation of the pile-up. The values of E and H have been obtained from the experimental load-displacement curves using depth profiling with Berkovich tip, which has created negligible pile-up. A sharper cube corner tip has been used to study the pile-up. It has been established that pile-up is determined by the material plasticity, when the compressive stress is below 200 MPa. The contribution of mechanical stress to the pile-up is essential for the stress as high, as about 500 MPa.

  10. Analysis of transients in the SRP test pile

    International Nuclear Information System (INIS)

    Church, J.P.

    1976-11-01

    Analysis of the hypothetical upper limit accident in the Savannah River Test Pile showed that the offsite thyroid dose from fission product release would be -3 of the 10-CFR-100 guideline dose for 95 percent of measured meteorological conditions. Offsite whole body dose would be negligible. The Test Pile was modified to limit the length of test piece that can be charged to the pile. These modifications reduce the potential offsite dose to -5 of the regulatory guidelines. Assessment of Test Pile safety included calculations of transients initiated by a variety of reactivity additions that were either terminated or not terminated by safety systems. Reactivity addition mechanisms considered were abnormally driving control rods out of the pile and charging abnormal test pieces into the pile. The transients were evaluated in the adiabatic approximation in which three-dimensional calculations of static flux shapes and reactivity were superimposed on point reactor kinetics calculations. Negative reactivity feedback effects appropriate for the pile and the temperature dependence of material properties, such as specific heat and thermal conductivity, were included. The results show that, for the worst initiators, safety systems can prevent the temperature rise from exceeding 1 0 C anywhere in the Test Pile. If the safety systems do not function, the pile temperatures will increase until the transient is ended by the inherent negative reactivity effects, including the melting of some fuel

  11. Critical sizes and flux distributions in the shut down pile

    International Nuclear Information System (INIS)

    Banchereau, A.; Berthier, P.; Genthon, J.P.; Gourdon, C.; Lattes, R.; Martelly, J.; Mazancourt, R. de; Portes, L.; Sagot, M.; Schmitt, A.P.; Tanguy, P.; Teste du Bailler, A.; Veyssiere, A.

    1957-01-01

    An important part of the experiments carried out on the reactor G1 during a period of shut-down has consisted in determinations of critical sizes, and measurements of flux distribution by irradiations of detectors. This report deals with the following points: 1- Critical sizes of the flat pile, the long pile and the uranium-thorium pile. 2- Flux charts of the same piles, and study of an exponential experiment. 3- Determination of the slit effect. 4- Calculation of the anisotropy of the lattice. 5- Description of the experimental apparatus of the irradiation measurements. (author) [fr

  12. Foundation heat transfer analysis for buildings with thermal piles

    International Nuclear Information System (INIS)

    Almanza Huerta, Luis Enrique; Krarti, Moncef

    2015-01-01

    Highlights: • A numerical transient thermal model for thermo-active foundations is developed. • Thermal interactions between thermal piles and building foundations are evaluated. • A simplified analysis method of thermal interactions between thermal piles and building foundations is developed. - Abstract: Thermal piles or thermo-active foundations utilize heat exchangers embedded within foundation footings to heat and/or cool buildings. In this paper, the impact of thermal piles on building foundation heat transfer is investigated. In particular, a simplified analysis method is developed to estimate the annual ground-coupled foundation heat transfer when buildings are equipped with thermal piles. First, a numerical analysis of the thermal performance of thermo-active building foundations is developed and used to assess the interactions between thermal piles and slab-on-grade building foundations. The impact of various design parameters and operating conditions is evaluated including foundation pile depth, building slab width, foundation insulation configuration, and soil thermal properties. Based on the results of a series of parametric analyses, a simplified analysis method is presented to assess the impact of the thermal piles on the annual heat fluxes toward or from the building foundations. A comparative evaluation of the predictions of the simplified analysis method and those obtained from the detailed numerical analysis indicated good agreement with prediction accuracy lower than 5%. Moreover, it is found that thermal piles can affect annual building foundation heat loss/gain by up to 30% depending on foundation size and insulation level

  13. Reducing Local Scouring at Bridge Piles Using Collars and Geobags

    Directory of Open Access Journals (Sweden)

    Shatirah Akib

    2014-01-01

    Full Text Available The present study examines the use of collars and geobags for reducing local scour around bridge piles. The efficiency of collars and geobags was studied experimentally. The data from the experiments were compared with data from earlier studies on the use of single piles with a collar and with a geobag. The results showed that using a combination of a steel collar and a geobag yields the most significant scour reduction for the front and rear piles, respectively. Moreover, the independent steel collar showed better efficiency than the independent geobag below the sediment level around the bridge piles.

  14. Rotary combustion device

    NARCIS (Netherlands)

    2008-01-01

    Rotary combustion device (1) with rotary combustion chamber (4). Specific measures are taken to provide ignition of a combustible mixture. It is proposed that a hollow tube be provided coaxially with the axis of rotation (6), so that a small part of the mixture is guided into the combustion chamber.

  15. Review of Development Status of Nuclear Superheat; Expose sur l'etat actuel des travaux concernant la surchauffe nucleaire; Obzor razrabotki voprosa o yadernykh peregrevatelyakh; Estudio de los progresos realizados en niateria de sobrecalentamiento nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Imhoff, D. H.; Pennington, R. T. [General Electric Company, San Jose, CA (United States)

    1963-10-15

    fuel irradiation performance, in-pile and out-of-pile uniform and localized corrosion evaluations, results from thermal superheat critical experiments, results from experimental heat-transfer testing and a brief appraisal of the economic incentives of the separate superheat reactor, integral superheat reactor, and mixed-spectrum superheat reactor design studies. (b) A brief description is given of the USAEC-Sponsored ESADA-VESR nuclear superheat fuel development programme. The development tasks, the initial core superheat fuel-element design, the range of experimental variables, and the expected results for the three-year fuel development programme are discussed. (author [French] Depuis 1959, la Societe General Electric s'occupe activement de mettre au point la surchauffe nucleaire dans les reacteurs ralentis a l'eau ordinaire. A cette epoque, le ''Superheat Advance Demonstration Experiment'' (SADE), finance par la societe, a permis d'obtenir, pour la premiere fois aux Etats-Unis, de la vapeur surchauffee par un dispositif nucleaire. Les auteurs du memoire font le point de la situation actuelle concernant la surchauffe nucleaire. Ils decrivent, dans une premiere partie, les trois principales installations de surchauffe nucleaire utilisees par la General Electric et, dans la seconde, les deux principaux programmes de recherches sur la surchauffe ainsi que les resultats les plus importants obtenus jusqu'ici dans ce domaine. 1. Principales installations pour les experiences de surchauffe: a) Breve description du SADE utilise dans le reacteur a eau bouillante de Vallecitos (VBWR), avec tableaux des conditions dans lesquelles se deroulent les experiences, et des elements combustibles irradies pendant la periode comprise entre mai 1959 et juin 1962; puis examen critique des resultats les plus importants ainsi obtenus. b) Breve description de l' ''Expanded Superheat Advance Demonstration Experiment'' (E-SADE) installe dans le reacteur de Vallecitos, avec tableaux des

  16. Statistical fluctuations in reactors (1960); Fluctuations statistiques dans les piles (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Raievski, V [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The theory of space dependent fluctuations is developed, taking into account the effect of delayed neutrons. The 'diffusion equation' or Fokker-Planck equation is worked out in the case of age and two group theory, but the first one because of in physical significance is used in this report. The theory is applied to the study of the spectral density of fluctuations and fluctuations of counting rate and current flowing through the charge resistor of an ionisation chamber, the effect of the entrance capacity is discussed. The space dependent theory shows that the fluctuations in the core and reflector of a near critical pile obey to the same law. The spectral densities in the core and reflector are similar, there is no sensible attenuation of high frequency fluctuations in the reflector. Compared to the space independent theory, this theory give better agreement with experience, one can use the simple space independent theory but in checking with experiment it is necessary to introduce numerical factors given by the space dependent theory. (author) [French] La theorie des fluctuations statistiques est developpee dans le cas spatial en tenant compte des neutrons retardes, et dans le cadre de la theorie de l'age vitesse. L'equation d'evolution de la probabilite est egalement etablie dans le cadre de la theorie a deux groupes. Ces considerations sont appliquees a l'etude de la densite spectrale des fluctuations et aux fluctuations des taux de comptage et du courant circulant dans la resistance de charge du detecteur. On etudie en particulier l'effet de la constante de temps introduite par la capacite d'entree. Cette theorie etablit que les fluctuations dans le coeur et le reflecteur suivent la meme loi pour une pile critique, il en est de meme pour la densite spectrale meme a frequence elevee. Par rapport a la theorie d'ensemble, la theorie spatiale donne des coefficients numeriques ou facteurs de forme, qui permettent d'obtenir un bon accord entre la theorie et l

  17. Utilisation de produits organiques oxygénés comme carburants et combustibles dans les moteurs. Deuxième partie : Les différentes filières d'obtention des carburols. Analyse technico-économique Using Oxygenated Organic Products As Fuels in Engines. Part Two: Different Systems for Producing Alcohol Fuels. Technico-Economic Analysis

    Directory of Open Access Journals (Sweden)

    Chauvel A.

    2006-11-01

    Full Text Available Parmi les produits à même d'être substitués aux hydrocarbures pour la constitution des carburants, les composés organiques oxygénés occupent une place prépondérante à cause de leurs caractéristiques favorables à la combustion dans les moteurs, qu'ils soient employés purs ou mélangés (seuls ou à plusieurs aux hydrocarbures, constituants des carburants classiques. Dans cet article, ces composés oxygénés sont désignés sous le nom de carburols. Alors que l'objet de la première partie de l'étude a été d'examiner les conséquences techniques de l'emploi de ces produits sur les circuits de distribution et le fonctionnement des véhicules, il s'agit dans la présente partie d'analyser les caractéristiques technico-économiques de leur fabrication. En particulier, on y aborde successivement les points suivants : - disponibilités en matières premières : ressources fossiles et végétales ; - analyse technique des divers modes d'obtention - analyse économique ; - programmes nationaux. Among products that can be substituted for hydrocarbons for producing fuels, oxygenated organic compounds occupy a preponderant position because of their favorable characteristics for combustion in engines whether they are used in a pure form or in mixtures (alone or severally with hydrocarbons which are used to make up conventional fuels. In this article these oxygenated compounds are given the name carburols (alcohol fuels. Whereas the aim of Part 1 was to examine the technical consequences of using such products in distribution circuits and for vehicle operating, Part 2 is an analysis of the technico-economic aspects of manufacturing them. In particular, the following points are taken up successively: (a availabilities of raw materials. fossil and vegetebal resources; (b technical analysis of various production methods; (c economic analysis; (d national programs. Depending on the amounts involved, a distinction is made among alternative

  18. Journal des Sciences Pour l'Ingénieur - Vol 12 (2010)

    African Journals Online (AJOL)

    DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. M Pasquinelli, D Maestre, K Lagha, D Barakel, J Le Rouzo, C Alfonso, O Palais ... Modele electrique d'une pile a combustible « pem » pour utilisation electronique de puissance · EMAIL FULL TEXT EMAIL FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  19. Natural radioactivity at CBPP waste pile

    International Nuclear Information System (INIS)

    Kovac, Jadranka; Marovic, Gordana

    2008-01-01

    Electrical power requirements will necessitate doubling the present generating capacity in Croatia in the future. As a result, environmental discharges associated with the coal power industry will considerably increase. Burning of coal is one source of enhanced radiation exposure to naturally occurring elements, particularly members of uranium and thorium decay chains. By coal burning (in CBPP at about 1700 C degrees) the activity originating from uranium and thorium is redistributed from underground (where the impact on humanity is nil) and liberated into the environment. Most of the radioactive substances are concentrated in the ash and slag, which are heavy and drop to the bottom of a furnace, lately transported to deposit pile, from where some activity may leach into aquifer, or be dispersed by wind. Lighter fly ash, however, is carried up the chimney and into the atmosphere and irradiates people and contaminates food crops. Also, 222 Rn escapes into the atmosphere during incineration, while the non-gaseous members of the uranium decay series remain in the ash and slag. Extensive investigations have been performed in the coal burning power plant (CBPP) Plomin in Croatia and at deposit pile. A network of radon escalation measurements, in-situ gamma-spectrometric measurements and monitoring of waste pile were organized. The results of the measurements confirm that the ash/slag deposite site are well monitored and involve all the necessary protective measures. All obtained data can be used as a valuable database for future estimations and modeling of the impact of radioactive pollution to the marine environment. (author)

  20. Occupational PAH Exposures during Prescribed Pile Burns

    Science.gov (United States)

    Robinson, M. S.; Anthony, T. R.; Littau, S. R.; Herckes, P.; Nelson, X.; Poplin, G. S.; Burgess, J. L.

    2008-01-01

    Wildland firefighters are exposed to particulate matter and gases containing polycyclic aromatic hydrocarbons (PAHs), many of which are known carcinogens. Our objective was to evaluate the extent of firefighter exposure to particulate and PAHs during prescribed pile burns of mainly ponderosa pine slash and determine whether these exposures were correlated with changes in urinary 1-hydroxypyrene (1-HP), a PAH metabolite. Personal and area sampling for particulate and PAH exposures were conducted on the White Mountain Apache Tribe reservation, working with 21 Bureau of Indian Affairs/Fort Apache Agency wildland firefighters during the fall of 2006. Urine samples were collected pre- and post-exposure and pulmonary function was measured. Personal PAH exposures were detectable for only 3 of 16 PAHs analyzed: naphthalene, phenanthrene, and fluorene, all of which were identified only in vapor-phase samples. Condensed-phase PAHs were detected in PM2.5 area samples (20 of 21 PAHs analyzed were detected, all but naphthalene) at concentrations below 1 μg m−3. The total PAH/PM2.5 mass fractions were roughly a factor of two higher during smoldering (1.06 ± 0.15) than ignition (0.55 ± 0.04 μg mg−1). There were no significant changes in urinary 1-HP or pulmonary function following exposure to pile burning. In summary, PAH exposures were low in pile burns, and urinary testing for a PAH metabolite failed to show a significant difference between baseline and post-exposure measurements. PMID:18515848

  1. Experimental Study on Post Grouting Bearing Capacity of Large Diameter Bored Piles

    Directory of Open Access Journals (Sweden)

    Wang Duanduan

    2015-01-01

    Full Text Available Post grouting can improve the inherent defects such as the formation of the mud cake at pile side and the sediment at pile end in the process of bored pile construction. Thus post grouting has been widely used in Engineering. The purpose of this paper is to research the influences of post grouting to pile bearing capacity more systematically and intuitively. Combined with the static load test of four test piles in Weihe River Bridge test area of new airport highway in Xi’an, the bearing capacity and settlement of routine piles and post grouting piles are comparatively analyzed. The test results show that under the same geological condition, post grouting can improve the properties of pile tip and pile shaft soil of bored piles significantly, enhance the ultimate resistance, improve the ultimate bearing capacity and reduce the pile tip settlement. Then post grouting can aim to optimize pile foundation.

  2. Prediction of pile set-up for Ohio soils : executive summary report.

    Science.gov (United States)

    2011-02-01

    ODOT typically uses small diameter driven pipe piles for bridge foundations. When a pile is driven into the subsurface, it disturbs and displaces the soil. As the soil surrounding the pile recovers from the installation disturbance, a time dependant ...

  3. INFLUENCE OF A ROUND CAP ON THE BEARING CAPACITY OF A LATERALLY LOADED PILE

    Directory of Open Access Journals (Sweden)

    Buslov Anatoliy Semenovich

    2012-07-01

    The data has proven that cap-covered piles are substantially more economical (over 40 % in terms of materials consumption rate if compared to constant cross-section piles (cap-free or broadening piles, all other factors being equal.

  4. Engineering approach to modeling of piled systems

    International Nuclear Information System (INIS)

    Coombs, R.F.; Silva, M.A.G. da

    1980-01-01

    Available methods of analysis of piled systems subjected to dynamic excitation invade areas of mathematics usually beyond the reach of a practising engineer. A simple technique that avoids that conflict is proposed, at least for preliminary studies, and its application, compared with other methods, is shown to be satisfactory. A corrective factor for parameters currently used to represent transmitting boundaries is derived for a finite strip that models an infinite layer. The influence of internal damping on the dynamic stiffness of the layer and on radiation damping is analysed. (Author) [pt

  5. Visual in-pile fuel disruption experiments

    International Nuclear Information System (INIS)

    Cano, G.L.; Ostensen, R.W.; Young, M.F.

    1978-01-01

    In a loss-of-flow (LOF) accident in an LMFBR, the mode of disruption of fuel may determine the probability of a subsequent energetic excursion. To investigate these phenomena, in-pile disruption of fission-heated irradiated fuel pellets was recorded by high speed cinematography. Instead of fuel frothing or dust-cloud breakup (as used in the SAS code) massive and very rapid fuel swelling, not predicted by analytical models, occurred. These tests support massive fuel swelling as the initial mode of fuel disruption in a LOF accident. (author)

  6. Installation effects of auger cast-in-place piles

    Directory of Open Access Journals (Sweden)

    Fathi M. Abdrabbo

    2012-12-01

    Full Text Available Since their introduction in Europe and North America some 50 years ago, auger cast-in-place piles (ACIP have become increasingly popular all over the world. These piles offer considerable environmental advantages during construction including minimal vibration, and low noise beside their high productivity. The most severe limitation of the ACIP is its sensitivity to operator performance, which can lead to a pile of poor integrity or inconsistent quality. Thus the improper use of ACIP equipment can result in piles containing defects or can cause instability of nearby structures. Three case studies are presented and discussed in an effort to illustrate learned lessons. First case study highlights the misuse of ACIP equipment leading to unreliable defective pile foundations. Second and third case studies show the adverse effects of installing ACIP on the stability of nearby structures. The study revealed that it is essential to employ a clever pile crew during the installation of ACIP to observe, interpret, and take corrective actions for unusual situations. The authorities worldwide should oblige pile contractors to employ only experienced and qualified workers in charge of geotechnical engineering works. Tender documents should include precise clauses related to the technological factors affecting the quality of ACIP. Unfavorable side effects of installing ACIP in saturated loose and medium sand can cause tilt of adjacent existing structures; even they are on either shallow or deep foundations. A row of micro-piles and/or soil grouting adjacent to the existing buildings were successfully used to reduce the adverse effects of ACIP. Implementation of different codes on the results of pile loading tests produced different pile working loads. Therefore tender documents should specify the code upon which interpreting the pile test results. At the meantime the geotechnical engineer should implement his experience and judgment during application of the

  7. Application of solar chargers to prospection instruments; Application des chargeurs solaires aux appareils de prospection

    Energy Technology Data Exchange (ETDEWEB)

    Caille, G [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The use of conventional batteries has certain disadvantages, and for this reason high-voltage batteries have been gradually replaced in all prospection instruments by transistor supply systems, using less cumbersome sources of energy. All the same low voltages are still necessary, and in hot or damp countries the use of these batteries leads to consumptions out of all proportion to the services rendered. This is why the use of solar energy possesses real advantages. After a brief review of the basic ideas on semiconductors, this article describes a selenium solar battery which was developed by the Westinghouse brakes and signals society. (author) [French] L'utilisation de piles classiques presente certains inconvenients. C'est pourquoi, dans tous les appareils de prospection, les piles fournissant des tensions elevees ont ete remplacees au fur et a mesure par des alimentations a base de transistors, utilisant des sources d'energie moins encombrantes. Toutefois, il faut tout de meme avoir des tensions faibles et l'utilisation de ces piles entraine dans les pays chauds ou humides une consommation disproportionnee par rapport aux services rendus. C'est pourquoi l'emploi de l'energie solaire presente de reels avantages. Cet expose decrit, apres un rappel de notion de base sur les semi-conducteurs, une batterie solaire a base de selenium qui a ete realisee par la Societe des freins et signaux Westinghouse. (auteur)

  8. Heave induced reduction of friction capacity of pile embedded in clays

    OpenAIRE

    Setyo Budi Gogot; Wibowo Tantri Gondo

    2017-01-01

    Installation of new piles may cause heave which influence friction capacity of existing piles. The heave can be observed from the difference in the elevation of existing pile heads recorded before and after the installation of new piles or through load-settlement diagram from Static Load Test data. This paper presents the study of bearing capacity of hollow cylindrical concrete piles with diameter of 800 mm from two projects. The piles at Project I and Project II were hydraulically jacked int...

  9. Combustion 2000

    Energy Technology Data Exchange (ETDEWEB)

    A. Levasseur; S. Goodstine; J. Ruby; M. Nawaz; C. Senior; F. Robson; S. Lehman; W. Blecher; W. Fugard; A. Rao; A. Sarofim; P. Smith; D. Pershing; E. Eddings; M. Cremer; J. Hurley; G. Weber; M. Jones; M. Collings; D. Hajicek; A. Henderson; P. Klevan; D. Seery; B. Knight; R. Lessard; J. Sangiovanni; A. Dennis; C. Bird; W. Sutton; N. Bornstein; F. Cogswell; C. Randino; S. Gale; Mike Heap

    2001-06-30

    . To achieve these objectives requires a change from complete reliance of coal-fired systems on steam turbines (Rankine cycles) and moving forward to a combined cycle utilizing gas turbines (Brayton cycles) which offer the possibility of significantly greater efficiency. This is because gas turbine cycles operate at temperatures well beyond current steam cycles, allowing the working fluid (air) temperature to more closely approach that of the major energy source, the combustion of coal. In fact, a good figure of merit for a HIPPS design is just how much of the enthalpy from coal combustion is used by the gas turbine. The efficiency of a power cycle varies directly with the temperature of the working fluid and for contemporary gas turbines the optimal turbine inlet temperature is in the range of 2300-2500 F (1260-1371 C). These temperatures are beyond the working range of currently available alloys and are also in the range of the ash fusion temperature of most coals. These two sets of physical properties combine to produce the major engineering challenges for a HIPPS design. The UTRC team developed a design hierarchy to impose more rigor in our approach. Once the size of the plant had been determined by the choice of gas turbine and the matching steam turbine, the design process of the High Temperature Advanced Furnace (HITAF) moved ineluctably to a down-fired, slagging configuration. This design was based on two air heaters: one a high temperature slagging Radiative Air Heater (RAH) and a lower temperature, dry ash Convective Air Heater (CAH). The specific details of the air heaters are arrived at by an iterative sequence in the following order:-Starting from the overall Cycle requirements which set the limits for the combustion and heat transfer analysis-The available enthalpy determined the range of materials, ceramics or alloys, which could tolerate the temperatures-Structural Analysis of the designs proved to be the major limitation-Finally the commercialization

  10. The role of the fuel injection system for combustion process optimization of highly turbocharged PC diesel engines; Die Rolle des Einspritzsystems bei der Brennverfahrensoptimierung von hochaufgeladenen Pkw-Dieselmotoren

    Energy Technology Data Exchange (ETDEWEB)

    Gerhardt, Juergen; Leonhard, Rolf; Krueger, Michael; Naber, Dirk; Pitt, J. [Robert Bosch GmbH, Stuttgart (Germany)

    2008-07-01

    In order to comply with continuously rising requirements from emission legislation and fuel economy enhancement, modern Diesel engines for passenger cars still offer a variety of measures. Focus of this paper is the importance of a highly flexible fuel-injection system and an optimized injection strategy as direct measures to improve both, tail-pipe emission as well as vehicle fuel economy. An integrated system approach of high pressure pump, injector and nozzle provides the latest injection patterns combined with an increased rail pressure level with a best-in-class hydraulic efficiency. The resulting improvement in the injection system and thus in the combustion also enables the introduction of additional indirect, very effective measures for fuel consumption reduction, such as downsizing and downspeeding. In order to fully utilize the potent of the mentioned approaches, the application of advanced boosting technology is an additional key factor. Bosch Diesel injection technology and optimized combustion systems pave the way to achieve the goal of efficient emission reduction. (orig.)

  11. Reduced NOX combustion method

    International Nuclear Information System (INIS)

    Delano, M.A.

    1991-01-01

    This patent describes a method for combusting fuel and oxidant to achieve reduced formation of nitrogen oxides. It comprises: It comprises: heating a combustion zone to a temperature at least equal to 1500 degrees F.; injecting into the heated combustion zone a stream of oxidant at a velocity within the range of from 200 to 1070 feet per second; injecting into the combustion zone, spaced from the oxidant stream, a fuel stream at a velocity such that the ratio of oxidant stream velocity to fuel stream velocity does not exceed 20; aspirating combustion gases into the oxidant stream and thereafter intermixing the aspirated oxidant stream and fuel stream to form a combustible mixture; combusting the combustible mixture to produce combustion gases for the aspiration; and maintaining the fuel stream substantially free from contact with oxidant prior to the intermixture with aspirated oxidant

  12. Attenuation of pressure dips underneath piles of spherocylinders.

    Science.gov (United States)

    Zhao, Haiyang; An, Xizhong; Gou, Dazhao; Zhao, Bo; Yang, Runyu

    2018-05-30

    The discrete element method (DEM) was used to simulate the piling of rod-like (elongated sphero-cylindrical) particles, mainly focusing on the effect of particle shape on the structural and force properties of the piles. In this work, rod-like particles of different aspect ratios were discharged on a flat surface to form wedge-shaped piles. The surface properties of the piles were characterized in terms of angle of repose and stress at the bottom of the piles. The results showed that the rise of the angle of repose became slower with the increase of particle aspect ratio. The pressure dip underneath the piles reached the maximum when the particle aspect ratio was around 1.6, beyond which the pressure dip phenomenon became attenuated. Both the pressure dip and the shear stress dip were quantitatively examined. The structure and forces inside the piles were further analyzed to understand the change in pressure dip, indicating that "bridging" or "arching" structures within the piles were the cause of the pressure dip.

  13. Effect of piles on the seismic response of mosques minarets

    Directory of Open Access Journals (Sweden)

    Mohamed Ahmed Abdel-Motaal

    2014-03-01

    Minaret (60.0-m height was studied to investigate the effects of soil stiffness, pile length, diameter, and arrangement, on the minaret and pile dynamic behavior. Comparison between study results and conventional analysis method is illustrated. Study results, discussion, and conclusion are given.

  14. The homogenisation of bulk material in blending piles.

    NARCIS (Netherlands)

    Gerstel, A.W.

    1979-01-01

    In this thesis the homogenisation of bulk material in three types of piles is dealt with. The homogenisation implies that the fluctuations of a material proprety in the input flow of the pile are transformed into output fluctuations, whereby the latter ones are evened out. Analyses are presented

  15. Estimating setup of driven piles into Louisiana clayey soils.

    Science.gov (United States)

    2010-11-15

    Two types of mathematical models for pile setup prediction, the Skov-Denver model and the newly developed rate-based model, have been established from all the dynamic and static testing data, including restrikes of the production piles, restrikes, st...

  16. Lateral resistance of piles near vertical MSE abutment walls.

    Science.gov (United States)

    2013-03-01

    Full scale lateral load tests were performed on eight piles located at various distances behind MSE walls. The objective of the testing was to determine the effect of spacing from the wall on the lateral resistance of the piles and on the force induc...

  17. Bulk density and porosity distributions in a compost pile

    NARCIS (Netherlands)

    Ginkel, van J.T.; Raats, P.A.C.; Haneghem, van I.A.

    1999-01-01

    This paper mainly deals with the description of the initial distribution of bulk density and porosity at the moment a compost pile is built or rebuilt. A relationship between bulk density and vertical position in a pile is deduced from theoretical and empirical considerations. Formulae to calculate

  18. Piling up technology of goods irradiated by single plate source

    International Nuclear Information System (INIS)

    Xia Hezhou; Chen Yuxia; Cao Hongyun; Lin Yong; Zhou guoquan

    1999-01-01

    In the irradiation process of piling up goods in static state, four irradiation working sites and single plate source was adopted. The results showed that piling up in this way remarkably raised the irradiation quality of goods. The utilization rate of radioactive ray reached 22.27%

  19. The reactor Melusine - radiation measurements carried out at the start of operation and during the first ascents to power; Pile Melusine - mesures de rayonnement effectuees au demarrage et pendant les premieres montees en puissance

    Energy Technology Data Exchange (ETDEWEB)

    Coutrot, V; Delpuech, J; Fitoussi, L [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    This report gives the results of radiation measurements carried out on the first C.E.A. swimming-pool pile, Melusine. The purpose of these measurements, which were carried out during the starting-up period and the first ascents to 1 MW power, is to check the radiation intensity levels near the pile and from this to verify the safety calculation methods used. In addition certain special measurements, such as those performed in and above the water of the swimming-pool, in the channels and outside them etc..., should make it possible eventually to define the conditions under which the pile may be used for special jobs with less protection. In the first part of the report are given the results of radiation measurements carried out during runs at low power plateaux not exceeding 500 W: in particular measurements at variable water levels in the water of the swimming-pool and on the axis of the open channels. The results given in the second part deal with radiation measurements performed in various parts of the premises, studies on the activation of the plugs in the experimental channels and of the materials in the forward compartment, and also of the radioactivity of the swimming-pool water and the air used to cool the channels. (author) [French] Le present rapport a pour but de donner les resultats des mesures de rayonnement effectuees aupres de la premiere pile piscine du C.E.A.: la pile Melusine. Le but de ces mesures, effectuees pendant la periode de demarrage et les premieres montees a la puissance de 1 MW, est de controler les niveaux d'intensite de rayonnement aupres de la pile et par la de juger des methodes de calculs de protection utilisees. D'autre part, certaines mesures plus particulieres, telles que celles effectuees dans l'eau et au-dessus de l'eau de la piscine, dans les canaux et a l'exterieur de ceux-ci, etc..., doivent permettre de definir ulterieurement les conditions d'utilisation de la pile pour des fonctionnements particuliers avec des protections

  20. The Analysis of Soil Resistance During Screw Displacement Pile Installation

    Science.gov (United States)

    Krasinski, Adam

    2015-02-01

    The application of screw displacement piles (SDP) is still increasing due to their high efficiency and many advantages. However, one technological problem is a serious disadvantage of those piles. It relates to the generation of very high soil resistance during screw auger penetration, especially when piles are installed in non-cohesive soils. In many situations this problem causes difficulties in creating piles of designed length and diameter. It is necessary to find a proper method for prediction of soil resistance during screw pile installation. The analysis of screw resistances based on model and field tests is presented in the paper. The investigations were carried out as part of research project, financed by the Polish Ministry of Science and Higher Education. As a result of tests and analyses the empirical method for prediction of rotation resistance (torque) during screw auger penetration in non-cohesive subsoil based on CPT is proposed.

  1. Modeling temperature noise in a fast-reactor pile

    International Nuclear Information System (INIS)

    Kebadze, B.V.; Pykhtina, T.V.; Tarasko, M.Z.

    1987-01-01

    To observe partial overlapping of the heat carrier cross section in piles, leading to local temperature rise or boiling of the sodium, provision is made for individual monitoring of the fuel assemblies with respect to the output temperature. Since the deviation of the mean flow rate through the pile and the output temperature is slight with this anomaly, the temperature fluctuations may provide a more informative index. The change in noise characteristics with partial overlapping of the cross sections occurs because of strong distortion of the temperature profile in the overlap region. The turbulent flow in the upper part of the pile transforms this nonuniformity into temperature pulsations which may be recorded by a sensor at the pile output. In this paper the characteristics of temperature noise are studied for various pile conditions and sensor locations by statistical modeling

  2. Static Tension Tests on Axially Loaded Pile Segments in Sand

    DEFF Research Database (Denmark)

    Thomassen, Kristina; Andersen, Lars Vabbersgaard; Ibsen, Lars Bo

    This paper provides laboratory test results of static axially loaded piles in sand. With a newly developed test setup, the pile-soil interface friction was investigated by using an open-ended steel pile segment with a diameter of 0.5 m. Use of a pile length of 1 m enabled the pile-soil interface...... friction to be analyzed at a given soil horizon while increasing the vertical effective stress in the sand. Test results obtained by this approach can be analyzed as single t-z curves and compared to predictions of unit shaft friction from current design methods for offshore foundations. The test results...... showed best agreement with the traditional design method given in the American Petroleum Institute (API) design code. When t-z curves obtained from the test results were compared to t-z curve formulations found in the literature, the Zhang formulation gave good predictions of the initial and post...

  3. SHAKING TABLE TESTS ON SEISMIC DEFORMATION OF PILE SUPPORTED PIER

    Science.gov (United States)

    Fujita, Daiki; Kohama, Eiji; Takenobu, Masahiro; Yoshida, Makoto; Kiku, Hiroyoshi

    The seismic deformation characeteristics of a pile supported pier was examined with the shake table test, especially focusing on the pier after its deformation during earthquakes. The model based on the similitude of the fully-plastic moment in piles was prepared to confirm the deformation and stress characteristic after reaching the fully-plastic moment. Moreover, assuming transportation of emergency supplies and occurrence of after shock in the post-disaster period, the pile supported pier was loaded with weight after reaching fully-plastic moment and excited with the shaking table. As the result, it is identified that the displacement of the pile supported pier is comparatively small if bending strength of piles does not decrease after reaching fully-plastic moment due to nonoccourrence of local backling or strain hardening.

  4. Theoretical study of short pile effect in tunnel excavation

    Science.gov (United States)

    Tian, Xiao-yan; Liu, Jing; Gao, Xiao-mei; Li, Yuan

    2017-09-01

    The Misaki Sato Go ideal elastoplastic model is adopted and the two stage analysis theory is used to study the effect of tunnel excavation on short pile effect in this paper. In the first stage, the free field vertical displacement of the soil at the corresponding pile location is obtained by using empirical formula. In the second stage, the displacement is applied to the corresponding pile location. The equilibrium condition of micro physical differential equation settlement of piles. Then through logical deduction and the boundary condition expressions of the settlement calculation, obtain the pile side friction resistance and axial force of the week. Finally, an engineering example is used to analyze the influence of the change of main parameters on their effects.

  5. Physical Modelling of Cyclic Laterally Loaded Pile in Cohesionless Soil

    DEFF Research Database (Denmark)

    Hansen, Mette; Wolf, Torben K.; Rasmussen, Kristian L.

    Offshore wind turbines are normally founded with large diameter monopiles and placed in rough environments subjected to variable lateral loads from wind and waves. A long-term lateral loading may create rotation (tilt) of the pile by change in the pile-soil system which is critical in the service......Offshore wind turbines are normally founded with large diameter monopiles and placed in rough environments subjected to variable lateral loads from wind and waves. A long-term lateral loading may create rotation (tilt) of the pile by change in the pile-soil system which is critical...... in the serviceability limit state. In this paper small-scale testing of a pile subjected to cyclic, lateral loading is treated in order to investigate the effect of cyclic loading. The test setup, which is an improvement of a previous setup, is described and the first results of testing are compared with previous...

  6. Laboratory Testing of Cyclic Laterally Loaded Pile in Cohesionless Soil

    DEFF Research Database (Denmark)

    Roesen, Hanne Ravn; Ibsen, Lars Bo; Hansen, Mette

    2013-01-01

    Offshore wind turbines are normally founded with large diameter monopiles and placed in rough environments subjected to variable lateral loads from wind and waves. A long-term lateral loading may create rotation (tilt) of the pile by change in the pile-soil system which is critical in the service......Offshore wind turbines are normally founded with large diameter monopiles and placed in rough environments subjected to variable lateral loads from wind and waves. A long-term lateral loading may create rotation (tilt) of the pile by change in the pile-soil system which is critical...... in the serviceability limit state. In this paper small-scale testing of a pile subjected to cyclic, lateral loading is treated in order to investigate the effect of cyclic loading. The test setup, which is an improvement of a previous setup, is described and the first results of testing are compared with previous...

  7. The Analysis of Soil Resistance During Screw Displacement Pile Installation

    Directory of Open Access Journals (Sweden)

    Krasinski Adam

    2015-02-01

    Full Text Available The application of screw displacement piles (SDP is still increasing due to their high efficiency and many advantages. However, one technological problem is a serious disadvantage of those piles. It relates to the generation of very high soil resistance during screw auger penetration, especially when piles are installed in non-cohesive soils. In many situations this problem causes difficulties in creating piles of designed length and diameter. It is necessary to find a proper method for prediction of soil resistance during screw pile installation. The analysis of screw resistances based on model and field tests is presented in the paper. The investigations were carried out as part of research project, financed by the Polish Ministry of Science and Higher Education. As a result of tests and analyses the empirical method for prediction of rotation resistance (torque during screw auger penetration in non-cohesive subsoil based on CPT is proposed.

  8. Optimal Design of Sheet Pile Wall Embedded in Clay

    Science.gov (United States)

    Das, Manas Ranjan; Das, Sarat Kumar

    2015-09-01

    Sheet pile wall is a type of flexible earth retaining structure used in waterfront offshore structures, river protection work and temporary supports in foundations and excavations. Economy is an essential part of a good engineering design and needs to be considered explicitly in obtaining an optimum section. By considering appropriate embedment depth and sheet pile section it may be possible to achieve better economy. This paper describes optimum design of both cantilever and anchored sheet pile wall penetrating clay using a simple optimization tool Microsoft Excel ® Solver. The detail methodology and its application with examples are presented for cantilever and anchored sheet piles. The effects of soil properties, depth of penetration and variation of ground water table on the optimum design are also discussed. Such a study will help professional while designing the sheet pile wall penetrating clay.

  9. Radio-protection problems presented by iodine isotopes in nuclear fuel chemical treatment plants (1962); Les problemes de radioprotection poses par les isotopes de l'iode dans les installations de traitement chimique des combustibles (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Bouzigues, H; Scheidhauer, J; Messainguiral, L [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1962-07-01

    The origin of radio-iodine and the conditions in which it is liberated are given. The authors review the question of the risks associated with the presence of this radioelement In the atmosphere. Finally a method is proposed for the trapping and rapid measuring of the iodine in the vapour form, applicable to radioprotection. (authors) [French] L'origine et les conditions de liberation du radioiode sont exposees. Les auteurs font le point de la question des risques associes a la presence de ce radioelement dans l'atmosphere. Enfin, une methode de piegeage et de mesure rapide de l'iode a l'etat de vapeur applicable a la radioprotection, est proposee. (auteurs)

  10. Ultimate capacity of piles penetrating in weak soil layers

    Directory of Open Access Journals (Sweden)

    Al-Obaidi Ahmed

    2018-01-01

    Full Text Available A pile foundation is one of the most popular forms of deep foundations. They are routinely employed to transfer axial structure loads through the soft soil to stronger bearing strata. Piles generally used to increase the load carrying capacity of the foundation and reduce the settlement of the foundation. On the other hand, many cases in practice where piles pass through different layers of soil that contain weak layers located at different depths and extension, also some time cavities with a different shape, size, and depth are found. In this study, a total of 96 cases is considered and simulated in PLAXIS 2D program aiming to understand the influence of weak soil on the ultimate pile capacity. The piles embedded in the dense sand with a layer of weak soil at different extension and location. The cross section of the geometry used in this study was designed as an axisymmetric model with the 15-node element; the boundary condition recommended at least 5D in the horizontal direction, and (L+5D in the vertical direction where D and L are the diameter and length of pile, respectively. The soil is modeled as Mohr-Coulomb, with five input parameters and the behavior of pile material represented by the linear elastic model. The results of the above cases are compared with the results found in a pile embedded in dense soil without weak layers or cavities. The results indicated that the existence of weak soil layer within the surrounding soil around the pile decreases the ultimate capacity. Furthermore, it has been found that increase in the weak soil width (extension leads to reduction in the ultimate capacity of the pile. This phenomenon is applicable to all depth of weak soil. The influence of weak layer extension on the ultimate capacity is less when it is presentin the upper soil layers.

  11. Checking the sealing of fuel elements by helium sweating - case of the reactors G2 (1960); Controle de l'etancheite des elements combustibles par ressuage d'helium - cas du reacteur G2 (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Blanc, B; D' Orival, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Choumoff, S [Compagnie Francaise Thomson-Houston, 75 - Paris (France)

    1960-07-01

    The G2 slug is a welded, hermetically sealed unit; the seal is checked by placing the fuel element in a helium atmosphere under pressure, then measuring the quantity of helium it releases in a vessel under vacuum. The theoretical aspect and the conditions of industrial application are reviewed, and the installations described. (author) [French] La cartouche G2 se presente comme un ensemble soude, hermetique; le controle d'etancheite s'effectue en immergeant l'element combustible dans une atmosphere d'helium sous pression puis en mesurant la quantite d'helium qu'il restitue dans une enceinte sous vide. L'aspect theorique et les conditions d'exploitation industrielle sont evoques et les installations decrites. (auteur)

  12. Étude économique des foyers domestiques par la technique d ...

    African Journals Online (AJOL)

    Les foyers font partie de la vie courante. Chaque ménage en utilise pour la cuisson de ses repas. Dans les pays en développement, la plupart des populations utilisent surtout des foyers à combustibles ligneux. Les effets négatifs sur l'environnement sont aujourd'hui bien connus : poches de désertification, érosion des sols, ...

  13. Combustion Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — For more than 30 years The Combustion Research Facility (CRF) has served as a national and international leader in combustion science and technology. The need for a...

  14. Alcohol combustion chemistry

    KAUST Repository

    Sarathy, Mani; Oß wald, Patrick; Hansen, Nils; Kohse-Hö inghaus, Katharina

    2014-01-01

    . While biofuel production and its use (especially ethanol and biodiesel) in internal combustion engines have been the focus of several recent reviews, a dedicated overview and summary of research on alcohol combustion chemistry is still lacking. Besides

  15. Maximal combustion temperature estimation

    International Nuclear Information System (INIS)

    Golodova, E; Shchepakina, E

    2006-01-01

    This work is concerned with the phenomenon of delayed loss of stability and the estimation of the maximal temperature of safe combustion. Using the qualitative theory of singular perturbations and canard techniques we determine the maximal temperature on the trajectories located in the transition region between the slow combustion regime and the explosive one. This approach is used to estimate the maximal temperature of safe combustion in multi-phase combustion models

  16. Digitalisation in atomic pile control (1962)

    International Nuclear Information System (INIS)

    Furet, J.

    1962-01-01

    A brief survey is first given of the general theorems of Boodle's algebra and of sequence systems using D.A. Huffmans theory. Some indications are then given concerning the setting-up and the operation of digital computers and also of the principal codes used in digital techniques. It is then shown how digitalisation in atomic pile control makes it possible to use new techniques having the following advantages in particular: greater working safety, a higher degree of centralisation, and suppression of the linear elements. A few examples are given of the application of these techniques to control, particularly with respect to the measurement of the neutronic power and of the period and also of course, to the treatment of the data and the sequence automatisms. The advantage of using digital techniques in the shutdown channels is also examined. Finally a review is given of the technology and the viability of the control devices used. (author) [fr

  17. Analysis of Wave Fields induced by Offshore Pile Driving

    Science.gov (United States)

    Ruhnau, M.; Heitmann, K.; Lippert, T.; Lippert, S.; von Estorff, O.

    2015-12-01

    Impact pile driving is the common technique to install foundations for offshore wind turbines. With each hammer strike the steel pile - often exceeding 6 m in diameter and 80 m in length - radiates energy into the surrounding water and soil, until reaching its targeted penetration depth. Several European authorities introduced limitations regarding hydroacoustic emissions during the construction process to protect marine wildlife. Satisfying these regulations made the development and application of sound mitigation systems (e.g. bubble curtains or insulation screens) inevitable, which are commonly installed within the water column surrounding the pile or even the complete construction site. Last years' advances have led to a point, where the seismic energy tunneling the sound mitigation systems through the soil and radiating back towards the water column gains importance, as it confines the maximum achievable sound mitigation. From an engineering point of view, the challenge of deciding on an effective noise mitigation layout arises, which especially requires a good understanding of the soil-dependent wave field. From a geophysical point of view, the pile acts like a very unique line source, generating a characteristic wave field dominated by inclined wave fronts, diving as well as head waves. Monitoring the seismic arrivals while the pile penetration steadily increases enables to perform quasi-vertical seismic profiling. This work is based on datasets that have been collected within the frame of three comprehensive offshore measurement campaigns during pile driving and demonstrates the potential of seismic arrivals induced by pile driving for further soil characterization.

  18. Distributed Temperature Measurement in a Self-Burning Coal Waste Pile through a GIS Open Source Desktop Application

    Directory of Open Access Journals (Sweden)

    Lia Duarte

    2017-03-01

    Full Text Available Geographical Information Systems (GIS are often used to assess and monitor the environmental impacts caused by mining activities. The aim of this work was to develop a new application to produce dynamic maps for monitoring the temperature variations in a self-burning coal waste pile, under a GIS open source environment—GIS-ECOAL (freely available. The performance of the application was evaluated with distributed temperature measurements gathered in the S. Pedro da Cova (Portugal coal waste pile. In order to obtain the temperature data, an optical fiber cable was disposed over the affected area of the pile, with 42 location stakes acting as precisely-located control points for the temperature measurement. A monthly data set from July (15 min of interval was fed into the application and a video composed by several layouts with temperature measurements was created allowing for recognizing two main areas with higher temperatures. The field observations also allow the identification of these zones; however, the identification of an area with higher temperatures in the top of the studied area was only possible through the visualization of the images created by this application. The generated videos make possible the dynamic and continuous visualization of the combustion process in the monitored area.

  19. Analysis of static and dynamic pile-soil-jacket behaviour

    Energy Technology Data Exchange (ETDEWEB)

    Azadi, Mohammad Reza Emami

    1998-12-31

    In the offshore industry, recent extreme storms, severe earthquakes and subsidence of the foundation of jacket platforms have shown that new models and methods must take into account the jacket- pile-soil foundation interaction as well as the non-linear dynamic performance/loading effects. This thesis begins with a review of the state of art pile-soil interaction model, recognizing that most existing pile-soil models have been established based on large diameter pile tests on specific sites. The need for site independent and mechanistic pile-soil interaction models led to the development of new (t-z) and (p-y) disk models. These are validated using the available database from recent large diameter pile tests in the North Sea and Gulf of Mexico. The established static disk models are applied for non-linear static analysis of the jacket-pile-soil system under extreme wave loading. Dynamic pile-soil interaction is studied and a new disk-cone model is developed for the non-linear and non-homogeneous soils. This model is applied to both surface and embedded disks in a soil layer with non-linear properties. Simplified non-linear as well as more complex analysis methods are used to study the dynamic response of the jacket platform under extreme sea and seismic loading. Ductility spectra analysis is introduced and used to study the dynamic performance of the jacket systems near collapse. Case studies are used to illustrate the effects of structural, foundation failure characteristics as well as dynamic loading effects on the overall performance of the jacket-pile-soil systems near ultimate collapse. 175 refs., 429 figs., 70 tabs.

  20. Field Test of Driven Pile Group under Lateral Loading

    Science.gov (United States)

    Gorska, Karolina; Rybak, Jaroslaw; Wyjadlowski, Marek

    2017-12-01

    All the geotechnical works need to be tested because the diversity of soil parameters is much higher than in other fields of construction. Horizontal load tests are necessary to determine the lateral capacity of driven piles subject to lateral load. Various load tests were carried out altogether on the test field in Kutno (Poland). While selecting the piles for load tests, different load combinations were taken into account. The piles with diverse length were chosen, on the basis of the previous tests of their length and integrity. The subsoil around the piles consisted of mineral soils: clays and medium compacted sands with the density index ID>0.50. The pile heads were free. The points of support of the “base” to which the dial gauges (displacement sensors) were fastened were located at the distance of 0.7 m from the side surface of the pile loaded laterally. In order to assure the independence of measurement, additional control (verifying) geodetic survey of the displacement of the piles subject to the load tests was carried out (by means of the alignment method). The trial load was imposed in stages by means of a hydraulic jack. The oil pressure in the actuator was corrected by means of a manual pump in order to ensure the constant value of the load in the on-going process of the displacement of the pile under test. On the basis of the obtained results it is possible to verify the numerical simulations of the behaviour of piles loaded by a lateral force.

  1. Les impacts des énergies fossiles sur l'environnement

    OpenAIRE

    Landrieu , Guy

    1994-01-01

    La satisfaction de leurs besoins en énergie est l'un des principaux facteurs de la transformation de leur environnement par les sociétés industrielles. Les combustibles carbonés fossiles, qui représentent environ 90% de la production commerciale d'énergie dans le monde, ont un rôle important dans ce processus de transformation. Une première donnée qui explique l'ampleur des impacts sur l'environnement liés aux combustibles fossiles est l'importance des flux de matières en circulation. On extr...

  2. ANALYSE DES PERCEPTIONS LOCALES ET DES FACTEURS ...

    African Journals Online (AJOL)

    AISA

    1Faculté des Sciences Agronomiques (FSA), Université d'Abomey-Calavi (UAC), 01 BP 526 Cotonou Bénin. Email : cgbemavo@yahoo.fr. 2Institut National des Recherches Agricoles du Bénin, Centre de Recherches Agricoles d'Agonkanmey (CRA-A),. Laboratoire des Sciences du Sol, Eau et Environnement (LSSEE).

  3. Experimental study of the pile EL3; Etude experimentale de la pile EL3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1958-07-01

    The results of two months' experiments, carried out at low power following the first divergence (4. July 1957) are presented. These experiments dealt with the following points: comparison of experimental and calculated values of the critical size; effects due to the introduction of absorbing materials into the principal experimental facilities, flux distribution measurements especially in these facilities, calibration of safety, control and compensating rods, determination of the average life of the neutrons. (author) [French] On expose les resultats relatifs a deux mois d'experiences effectuees a basse puissance a la suite de la premiere divergence (4 juillet 1957). Ces experiences ont porte sur les points suivants: comparaison des tailles critiques experimentales et calculees, effets dus a l'introduction de corps absorbants dans les principaux dispositifs experimentaux, mesures des distributions de flux particulierement dans ces dispositifs, etalonnage des barres de securite, de reglage et de compensation, determination de la vie moyenne des neutrons. (auteur)

  4. Elementary calculation of the shutdown delay of a pile

    International Nuclear Information System (INIS)

    Yvon, J.

    1949-04-01

    This study analyzes theoretically the progress of the shutdown of a nuclear pile (reactor) when a cadmium rod is introduced instantaneously. For simplification reasons, the environment of the pile is considered as homogenous and only thermal neutrons are considered (delayed neutrons are neglected). Calculation is made first for a plane configuration (plane vessel, plane multiplier without reflector, and plane multiplier with reflector), and then for a cylindrical configuration (multiplier without reflector, multiplier with infinitely thick reflector, finite cylindrical piles without reflector and with reflector). The self-sustain conditions are calculated for each case and the multiplication length and the shutdown delay are deduced. (J.S.)

  5. Gas reactor in-pile safety test project (GRIST-2)

    International Nuclear Information System (INIS)

    Kelley, A.P. Jr.; Arbtin, E.; St Pierre, R.

    1979-01-01

    Although out-of-pile tests may be expected to confirm individual phenomena models in core disruptive accident analysis codes, only in-pile tests are capable of verifying the extremely complex integrated model effects within the appropriate time phase for these accidents. For this reason, the GRIST-2 project, the purpose of which is to design and construct an in-pile helium loop capable of transient safety testing in the TREAT facility in Idaho, forms a cornerstone of the US GCFR safety program. The project organization, experiment program, facility, helium system design, and schedule which have been selected to meet the objectives are described

  6. Batteries observatory: 2001 situation; Observatoire des piles et accumulateurs: la situation en 2001. Rapport sur la mise en oeuvre des dispositions reglementaires relatives aux piles et accumulateurs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-12-01

    This report presents the 2001 situation in France of the commercialization, collection and processing of batteries (non-chargeable and chargeable). The data presented mainly come from the CERFA notifications 11801*01, 11802*01 and 11803*01, and thus present important limitations due to the declaration system and the format of consignment note used. Therefore, two years after the creation of the batteries observatory, the coverage of the battery market remains incomplete. Moreover, some choices were made during the preparation of this report in order to make it more readable. Also, the unit/weight conversions made can lead to a 15% uncertainty and the distinction between portable and non-portable batteries was made on the basis of a weight criterion (lower or greater than 1 kg). Finally, the collection indicators have to be considered with caution because their definition varies from one country to another. (J.S.)

  7. Solvent purification using a current of water vapour. A continuous process applicable to chemical plants treating irradiated fuels; Purification des solvants par entrainement a la vapeur d'eau. Procede continu applicable aux usines chimiques de traitement des combustibles irradies

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, P.R.; Sautray, R.R.; Girard, B.R. [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1964-07-01

    The pilot plant described in this report is intended for the continuous purification of the solvent used in the plutonium extraction plant at Marcoule, by separating the impurities (fission products). This physical separation is operated by carrying over in a water vapour stream. The contaminating products, only slightly volatile, remain in the form of the droplets and are separated; the vaporised solvent and the water vapour used are condensed and then separated. The originality of the installation resides in the system for pulverising the liquid and in the operating conditions: low working pressure and temperature. The systematic analysis of the various parameters (percentage of residue; flow, pressure and temperature ratios etc...) has shown their influence on the decontamination. The activity due to the zirconium-niobium is undetectable after treatment, and it is easy to obtain decontamination factors of 300 for the ruthenium. The, presence of uranium is favorable for the decontamination. As a conclusion, some extra-technical considerations are given concerning in particular the approximate cost price of the treated solvent per litre. (authors) [French] L'installation pilote decrite dans ce rapport est destinee a purifier, en continu, le solvant utilise a l'usine d'extraction du plutonium de Marcoule, en separant les impuretes (produits de fission). Cette separation physique est realisee par entrainement a la vapeur d'eau. Les produits contaminants, peu volatils, restant sous forme de gouttelettes, sont separes; le solvant vaporise ainsi que la vapeur d'entrainement sont condenses puis separes. L'originalite de l'installation reside dans le systeme de pulverisation du liquide et dans les conditions operatoires: faible pression et basse temperature de fonctionnement. L'analyse systematique des differents parametres (pourcentage de residus, rapport de debits, pression et temperature, etc...) a mis en evidence leur influence

  8. Monitoring moisture content, temperature, and humidity in whole-tree pine chip piles

    Science.gov (United States)

    John Klepac; Dana Mitchell; Jason Thompson

    2015-01-01

    Two whole-tree chip piles were monitored for moisture content, temperature, and relative humidity from October 8th, 2010 to March 16th, 2011 at a location in south Alabama. Initial moisture content samples were collected immediately after chips were delivered to the study location on October 8th for Pile 1 and October 22nd for Pile 2. During pile construction, Lascar...

  9. 40 CFR 761.347 - First level sampling-waste from existing piles.

    Science.gov (United States)

    2010-07-01

    ... existing piles. 761.347 Section 761.347 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... from existing piles. (a) General. Sample piles that are either specifically configured for sampling... alternate sampling plan in accordance with § 761.62(c). (b) Specifically configured piles. A specifically...

  10. Pile mixing increases greenhouse gas emissions during composting of dairy manure

    Science.gov (United States)

    The effect of pile mixing on greenhouse gas (GHG) emissions from stored dairy manure was determined using large flux chambers designed to completely cover pilot-scale manure piles. GHG emissions from piles that were mixed four times during the 80 day trial were about 20% higher than unmixed piles. ...

  11. Estimating volume, biomass, and potential emissions of hand-piled fuels

    Science.gov (United States)

    Clinton S. Wright; Cameron S. Balog; Jeffrey W. Kelly

    2009-01-01

    Dimensions, volume, and biomass were measured for 121 hand-constructed piles composed primarily of coniferous (n = 63) and shrub/hardwood (n = 58) material at sites in Washington and California. Equations using pile dimensions, shape, and type allow users to accurately estimate the biomass of hand piles. Equations for estimating true pile volume from simple geometric...

  12. The effect of loading rate on pile bearing capacity of saturated sand

    NARCIS (Netherlands)

    Archeewa, E.

    2005-01-01

    Pile load tests are commonly used by engineers to determine its bearing capacity. At present, there are three methods of pile load tests: the static, the dynamic and the quasi-static test. The static pile load test is done by applying an axial load on the pile with a long duration. The dynamic and

  13. Comparison of Three Different Methods for Pile Integrity Testing on a Cylindrical Homogeneous Polyamide Specimen

    Science.gov (United States)

    Lugovtsova, Y. D.; Soldatov, A. I.

    2016-01-01

    Three different methods for pile integrity testing are proposed to compare on a cylindrical homogeneous polyamide specimen. The methods are low strain pile integrity testing, multichannel pile integrity testing and testing with a shaker system. Since the low strain pile integrity testing is well-established and standardized method, the results from it are used as a reference for other two methods.

  14. Device for controlling the current by an electromagnetic load, particularly by an electromagnetic injection valve of an internal combustion engine. Einrichtung zum Steuern des Stromes durch einen elektromagnetischen Verbraucher, insbesondere durch ein elektromagnetisch betaetigbares Einspritzventil einer Brennkraftmaschine

    Energy Technology Data Exchange (ETDEWEB)

    Dilger, P; Hoenig, G; Kauff, H

    1980-07-24

    The invention refers to a device for controlling the current by an electromagnetic load, particularly the electromagnetically actuated injection valve of an internal combustion engine. A first electrical switching device and an ammeter are connected in series with the electromagnetic load between two voltage supply wires, with a free running circuit and a threshold switch together with the ammeter. The invention is characterised by the fact that the free running circuit has a series circuit consisting of a second electrical switching device and a second ammeter, and the first switching device is controlled, depending on time and depending on reaching the upper and lower limits of current flowing through the load and reaching the lower threshold value. The ammeter in the free running circuit has at least one threshold value switch, whose output is coupled to a time control circuit for one of the two switching devices. The time dependent flow control is carried out during the stopping phase of the electro-magnetic load by counting processes.

  15. Uncertainties in hydrogen combustion

    International Nuclear Information System (INIS)

    Stamps, D.W.; Wong, C.C.; Nelson, L.S.

    1988-01-01

    Three important areas of hydrogen combustion with uncertainties are identified: high-temperature combustion, flame acceleration and deflagration-to-detonation transition, and aerosol resuspension during hydrogen combustion. The uncertainties associated with high-temperature combustion may affect at least three different accident scenarios: the in-cavity oxidation of combustible gases produced by core-concrete interactions, the direct containment heating hydrogen problem, and the possibility of local detonations. How these uncertainties may affect the sequence of various accident scenarios is discussed and recommendations are made to reduce these uncertainties. 40 references

  16. Study of the energy management of a fuel cell coupled with super-capacitors for propelling a road vehicle; Etude de la gestion d'energie d'une pile a combustible associee a des supercondensateurs pour alimenter un vehicule routier

    Energy Technology Data Exchange (ETDEWEB)

    Chapoulie, Ph.; Bourdin, B. [Axodyn, 31 - Toulouse (France)

    2000-07-01

    In this article is presented the hybridization of a source for furnishing power to an automobile traction chain; the source being composed of a fuel cell and of several super-capacitors. From the performance and the constraints of the vehicle have been defined a strategy for the energy management of the source in relation to the size of the components. In order to verify the performance and the autonomy of the vehicle, a modelling of the system has been developed; it follows an approach of global design; the unit of components being described by models which reveal the energetic exchanges in the structure. In order to implement the model thus developed, the SABER simulation tool has been used. (O.M.)

  17. Cobalt, titanium or cerium oxide protective coatings for the nickel cathode of the molten carbonate fuel cells; Revetements protecteurs a base d'oxyde de cobalt, de titane ou de cerium pour la cathode de nickel des piles a combustible a carbonates fondus

    Energy Technology Data Exchange (ETDEWEB)

    Mendoza Blanco, L.

    2003-10-15

    The aim of this work is to combine the MCFC cathode Li{sub x}Ni{sub 1-x}O properties to those of the protective coatings of LiCoO{sub 2}, Li{sub 2}TiO{sub 3} or of CeO{sub 2}, less soluble in the molten carbonates. In the cases of LiCoO{sub 2}, have been carried out by controlled potential coulometry in aqueous solution, a deposition of Co{sub 3}O{sub 4} on dense Ni. The cobalt oxide reacts rapidly in the Li{sub 2}CO{sub 3}-Na{sub 2}CO{sub 3} medium at 650 C to give LiCoO{sub 2}, a spinel cubic phase revealed by Raman spectroscopy. (O.M.)

  18. Optimization of electrical conduction and passivity properties of stainless steels used for PEM fuel cell bipolar plates; Opmisation des proprietes de conduction electrique et de passivite d'aciers inoxydables pour la realisation de plaques bipolaires de pile a combustible de type PEMFC

    Energy Technology Data Exchange (ETDEWEB)

    Andre, J

    2007-10-15

    Among the new technologies for energy for sustainable development, PEMFC (proton exchange membrane fuel cells) offer seducing aspects. However, in order to make this technology fit large scale application requirements, it has to comply with stringent cost, performance, and durability criteria. In such a frame, the goal of this work was to optimize electrical conduction properties and passivity of stainless steels for the conception of PEMFC bipolar plates, used instead of graphite, the reference material. This work presents the possible ways of performance loss when using stainless steels and some methods to solve this problem. Passive film properties were studied, as well as their modifications by low cost industrial surface treatments, without deposition. Ex situ characterizations of corrosion resistance and electrical conduction were performed. Electrochemical impedance spectroscopy, water analysis, surface analysis by microscopy and photoelectron spectroscopy allowed to study the impact of ageing on two alloys in different states, and several conditions representative of an exposure to PEMFC media. Correlations between semi-conductivity properties, composition, and structure of passive layers were considered, but not leading to clear identification of all parameters responsible for electrical conduction and passivity. The plate industrial state is not convenient for direct use in fuel cell to comply with durability and performance requirements. A surface modification studied improves widely electrical conduction at initial state. The performance is degraded with ageing, but maintaining a level higher than the initial industrial state. This treatment increases also corrosion resistance, particularly on the anode side. (author)

  19. Optimization of electrical conduction and passivity properties of stainless steels used for PEM fuel cell bipolar plates; Opmisation des proprietes de conduction electrique et de passivite d'aciers inoxydables pour la realisation de plaques bipolaires de pile a combustible de type PEMFC

    Energy Technology Data Exchange (ETDEWEB)

    Andre, J

    2007-10-15

    Among the new technologies for energy for sustainable development, PEMFC (proton exchange membrane fuel cells) offer seducing aspects. However, in order to make this technology fit large scale application requirements, it has to comply with stringent cost, performance, and durability criteria. In such a frame, the goal of this work was to optimize electrical conduction properties and passivity of stainless steels for the conception of PEMFC bipolar plates, used instead of graphite, the reference material. This work presents the possible ways of performance loss when using stainless steels and some methods to solve this problem. Passive film properties were studied, as well as their modifications by low cost industrial surface treatments, without deposition. Ex situ characterizations of corrosion resistance and electrical conduction were performed. Electrochemical impedance spectroscopy, water analysis, surface analysis by microscopy and photoelectron spectroscopy allowed to study the impact of ageing on two alloys in different states, and several conditions representative of an exposure to PEMFC media. Correlations between semi-conductivity properties, composition, and structure of passive layers were considered, but not leading to clear identification of all parameters responsible for electrical conduction and passivity. The plate industrial state is not convenient for direct use in fuel cell to comply with durability and performance requirements. A surface modification studied improves widely electrical conduction at initial state. The performance is degraded with ageing, but maintaining a level higher than the initial industrial state. This treatment increases also corrosion resistance, particularly on the anode side. (author)

  20. Pile foundation response in liquefiable soil deposit during strong earthquakes. ; Centrifugal test for pile foundation model and correlation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Miyamoto, Y.; Miura, K. (Kajima Corp., Tokyo (Japan)); Scott, R.; Hushmand, B. (California Inst. of Technology, California, CA (United States))

    1992-09-30

    For the purpose of studying the pile foundation response in liquefiable soil deposit during earthquakes, a centrifugal loading system is employed which can reproduce the stress conditions of the soil in the actual ground, and earthquake wave vibration tests are performed in dry and saturated sand layers using a pile foundation model equipped with 4 piles. In addition, the result of the tests is analyzed by simulation using an analytic method for which effective stress is taken into consideration to investigate the effectiveness of this analytical model. It is clarified from the result of the experiments that the bending moment of the pile and the response characteristics of the foundation in the pile foundation response in saturated sand are greatly affected by the longer period of acceleration wave form of the ground and the increase in the ground displacement due to excess pore water pressure buildup. It is shown that the analytical model of the pile foundation/ground system is appropriate, and that this analytical method is effective in evaluating the seismic response of the pile foundation in nonlinear liquefiable soil. 23 refs., 21 figs., 3 tabs.

  1. Numerical Simulation for the Soil-Pile-Structure Interaction under Seismic Loading

    Directory of Open Access Journals (Sweden)

    Lifeng Luan

    2015-01-01

    Full Text Available Piles are widely used as reinforcement structures in geotechnical engineering designs. If the settlement of the soil is greater than the pile, the pile is pulled down by the soil, and negative friction force is produced. Previous studies have mainly focused on the interaction of pile-soil under static condition. However, many pile projects are located in earthquake-prone areas, which indicate the importance of determining the response of the pile-soil structure under seismic load. In this paper, the nonlinear, explicit, and finite difference program FLAC3D, which considers the mechanical behavior of soil-pile interaction, is used to establish an underconsolidated soil-pile mode. The response processes of the pile side friction force, the pile axial force, and the soil response under seismic load are also analyzed.

  2. Experimental Comparison of Statically and Cyclically Loaded Non-Slender Piles in Sand

    DEFF Research Database (Denmark)

    Sørensen, Søren Peder Hyldal; Ibsen, Lars Bo

    rigid form of motion. The Winkler model approach, employing p-y curves to describe the soil-pile interaction, is often employed as the design method for laterally loaded piles. The p-y curve formulation, currently recommended by the American Petroleum Institute and Det Norske Veritas, is based on tests...... on slender piles with length to diameter ratios larger than ten and outer pile diameters less than two meters. Hence, the pile tests that form the basis of the currently recommended p-y curve formulation are conducted with use of piles that exhibits a flexible behaviour, which is in contrast to the piles...... used as foundation for modern offshore wind energy converters. The aim of the present work is to investigate the pile behaviour for non-slender piles by means of small-scale testing. The pile behaviour is investigated and compared for both static and cyclic loading. When conducting small-scale tests...

  3. The Use of Tactile Sensors and PIV Analysis for Understanding the Bearing Mechanism of Pile Groups.

    Science.gov (United States)

    You, Zhijia; Chen, Yulong

    2018-02-06

    Model tests were carried out in dry silica sand under pile loading and visualizing observation to investigate the behavior of a pile group. The pile group consisted of nine cylindrical model piles of 40 mm in diameter in most tests or three rectangular parallelepiped model piles in the visualizing observation. Pile spacings of 200 mm and 100 mm between pile centers were used in the models. Tactile sensors were installed to measure the pressure distribution in the ground and colored sand layer with particle image velocimetry (PIV) analysis to reveal the ground deformation in addition to strain gauges inside the model piles to investigate the interaction among group piles. The tests results showed that a narrower spacing between piles resulted in a wider affected area of the ground and the interaction was more significant below the tips.

  4. New class of combustion processes

    International Nuclear Information System (INIS)

    Merzhanov, A.G.; Borovinskaya, I.P.

    1975-01-01

    A short review is given of the results of work carried out since 1967 on studying the combustion processes caused by the interaction of chemical elements in the condensed phase and leading to the formation of refractory compounds. New phenomena and processes are described which are revealed when investigating the combustion of the systems of this class, viz solid-phase combustion, fast combustion in the condensed phase, filtering combustion, combustion in liquid nitrogen, spinning combustion, self-oscillating combustion, and repeated combustion. A new direction in employment of combustion processes is discussed, viz. a self-propagating high-temperature synthesis of refractory nitrides, carbides, borides, silicides and other compounds

  5. G2 and G3 reactors design; Description des reacteurs G2 et G3

    Energy Technology Data Exchange (ETDEWEB)

    Herreng,; Ertaud,; Pasquet, [Societe Alsacienne de Constructions Mecaniques (France)

    1958-07-01

    classique a trois etages (pressions 10,3: 2 et 0,5 kg/cm{sup 2}). On peut condenser la vapeur, en cas d'arret d'un groupe turbo-alternateur, sans modifier le regime de la pile. Des circuits annexes servent a assurer une epuration continue du CO{sub 2}, son stockage et sa vidange. La commande du reacteur est assuree par la manoeuvre de 49 barres en carbure de bore. La regulation de l'ensemble a pose des problemes difficiles dont les solutions seront completees par l'experience du fonctionnement. Des conferences speciales seront consacrees aux elements de combustibles et a la detection des ruptures de gaines. (auteur)

  6. A Systematic Approach for Determining Vertical Pile Depth of Embedment in Cohensionless Soils to Withstand Lateral Barge Train Impact Loads

    Science.gov (United States)

    2017-01-30

    at the top of the piles, vertical pile groups must be designed to exhibit long-pile behavior (e.g., nominal change of deflection at the pile cap...smeared crack” pile properties (and thus, the advisability of using COM624G for analysis) for the incremental pushover design method, as compared...to show nominal change as the pile-tip depth is increased. This same behavior should exist for piles in any homogeneous, cohesionless soil. From

  7. An Estimating Formula of Lateral Load Acting on Stabilizing Piles for Landslide

    OpenAIRE

    尾崎, 叡司; 石田, 陽博

    1984-01-01

    An estimating method of lateral load acting on stabilizing piles in a raw due to the plastic deformation of soil for landslide was discussed in this paper. Special emphasis was put on the problems of the space between stabilizing piles and of lateral load induced in piles through the surrounding soils due to plastic deformation in the vicinity of piles. In order to obtain an analytical result of the lateral load acting on stabilizing piles, the authors tried to solve the equilibrium equation ...

  8. Assessment of Soil Arching Factor for Retaining Wall Pile Foundations

    Science.gov (United States)

    2017-03-31

    Despite the prevalence of the soldier piles retaining wall systems as temporary and even permanent shoring systems along state highways, relatively little is known on the effect of the foreslope bench width and the slope inclination on the arching ca...

  9. Field testing of jet-grouted pile : [summary].

    Science.gov (United States)

    2014-01-01

    In many areas of Florida, local geology dictates the use of deep foundations for transportation structures bridges, noise walls, signage, etc. When concrete piles are used, they are either prestressed at the casting yard, cast in situ through a h...

  10. 20051655 - Petronas, Capacity of Driven Piles Offshore Malaysia

    DEFF Research Database (Denmark)

    Augustesen, Anders

    This document is the second of four notes concerning the effects of time (in this case ageing) on the vertical capacity of piles. It includes a critical review of the relevant publications described in note a....

  11. Lateral response of pile foundations in liquefiable soils

    Directory of Open Access Journals (Sweden)

    Asskar Janalizadeh

    2015-10-01

    Full Text Available Liquefaction has been a main cause of damage to civil engineering structures in seismically active areas. The effects of damage of liquefaction on deep foundations are very destructive. Seismic behavior of pile foundations is widely discussed by many researchers for safer and more economic design purposes. This paper presents a pseudo-static method for analysis of piles in liquefiable soil under seismic loads. A free-field site response analysis using three-dimensional (3D numerical modeling was performed to determine kinematic loads from lateral ground displacements and inertial loads from vibration of the superstructure. The effects of various parameters, such as soil layering, kinematic and inertial forces, boundary condition of pile head and ground slope, on pile response were studied. By comparing the numerical results with the centrifuge test results, it can be concluded that the use of the p-y curves with various degradation factors in liquefiable sand gives reasonable results.

  12. Airborne thermography of temperature patterns in sugar beet piles

    Science.gov (United States)

    Moore, D. G.; Bichsel, S.

    1975-01-01

    An investigation was conducted to evaluate the use of thermography for locating spoilage areas (chimneys) within storage piles and to subsequently use the information for the scheduling of their processing. Thermal-infrared quantitative scanner data were acquired initially on January 16, 1975, over the storage piles at Moorhead, Minnesota, both during the day and predawn. Photographic data were acquired during the day mission to evaluate the effect of uneven snow cover on the thermal emittance, and the predawn thermography was used to locate potential chimneys. The piles were examined the day prior for indications of spoilage areas, and the ground crew indicated that no spoilage areas were located using their existing methods. Nine spoilage areas were interpreted from the thermography. The piles were rechecked by ground methods three days following the flights. Six of the nine areas delineated by thermography were actual spoilage areas.

  13. Repair systems for deteriorated bridge piles : final report.

    Science.gov (United States)

    2017-04-01

    The objective of this research project is to develop a durable repair system for deteriorated steel bridge piles that : can be implemented without the need for dewatering. A rigorous survey of the relevant practice nationwide was : conducted to infor...

  14. After the fire: preparing the Windscale Piles for decommissioning

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    The Windscale Piles in the UK were taken out of service in 1957 after a fire in Pile 1. They have remained essentially in the same state since that time and during this period there have been periodic inspections of the complete structures to ensure that there is no degradation taking place. The Piles are in a safe condition and would remain so for a considerable period (50 years or more) provided they were undisturbed. However, the Piles must be decommissioned at some time and clearly this will require preparatory work which is now being carried out. The work is scheduled for completion in 1994, at a cost of Pound 8 million at present day prices. (author)

  15. Hydroacoustic pile driving noise study - comprehensive report : final report.

    Science.gov (United States)

    2016-12-28

    Alaska DOT&PF and JASCO Applied Sciences partnered to characterize underwater noise from pile driving activities to inform the assessment of the potential impact of such noise on marine mammals. JASCO measured underwater sounds at the Kake, Auke Bay,...

  16. The Influence of Time on Bearing Capacity of Driven Piles

    DEFF Research Database (Denmark)

    Jensen, J. Lysebjerg; Augustesen, A.; Sørensen, Carsten S.

    2004-01-01

    In Danish engineering practice, one of the ways to determine the ultimate bearing capacity of an axially loaded pile is by means of geostatic formulas. In the equation describing the contribution from the shaft friction to the total bearing capacity for piles located entirely or partly in clay......, a regeneration factor appears. The regeneration factor accounts for effects of dissipation of pore pressure due to pile driving and true time effects such as ageing on the ultimate bearing capacity. Normally the factor is 0.4 but in this paper, the influence of the undrained shear strength and time...... on the regeneration factor is investigated. A relation between the quantities is proposed, which in the end may imply an economical benefit in the design of pile foundations....

  17. Piles, tabs and overlaps in navigation among documents

    DEFF Research Database (Denmark)

    Jakobsen, Mikkel Rønne; Hornbæk, Kasper

    2010-01-01

    Navigation among documents is a frequent, but ill supported activity. Overlapping or tabbed documents are widespread, but they offer limited visibility of their content. We explore variations on navigation support: arranging documents with tabs, as overlapping windows, and in piles. In an experim......Navigation among documents is a frequent, but ill supported activity. Overlapping or tabbed documents are widespread, but they offer limited visibility of their content. We explore variations on navigation support: arranging documents with tabs, as overlapping windows, and in piles....... In an experiment we compared 11 participants’ navigation with these variations and found strong task effects. Overall, overlapping windows were preferred and their structured layout worked well with some tasks. Surprisingly, tabbed documents were efficient in tasks requiring simply finding a document. Piled...... on document navigation and its support by piling....

  18. Acoustic emission diagnosis of concrete-piles damaged by earthquakes

    International Nuclear Information System (INIS)

    Shiotami, Tomoki; Sakaino, Norio; Ohtsu, Masayasu; Shigeishi, Mitsuhiro

    1997-01-01

    Earthquakes often impose unexpected damage on structures. Concerning the soundness of the structure, the upper portion is easily estimated by visual observation, while the lower portion located in deep underground is difficult to be estimated. Thus there exist few effective methods to investigate underground structures. In this paper, a new inspection technique for damage evaluation of concrete-piles utilizing acoustic emission (AE) is proposed, and is verified by a series of experiments. Firstly, such basic characteristics as the attenuation and effective wave-guides for detecting AE underground, are examined through laboratory tests. Secondary, fracture tests of full-scale prefabricated concrete piles are conducted, and the characteristics of the AE are examined. Finally, actual concrete-piles attacked by the 1995 Great Hanshin Earthquake are investigated. Results confirm that the estimated damages by the proposed method are in good agreement with actual damaged locations. Thus, the method is very effective for the diagnosis of the concrete-piles.

  19. Influence of cantilevered sheet pile deflection on adjacent roadways.

    Science.gov (United States)

    2009-06-01

    Cantilevered sheet pile walls are often used adjacent roadways as temporary support during construction. Excess movement of these walls has led to excessive roadway distress causing additional repairs to be necessary. This study assessed the effects ...

  20. Computerised analysis of sulphate action on model concrete piles

    Digital Repository Service at National Institute of Oceanography (India)

    Deshmukh, A.M.; Balasubramanian, S.; Venugopal, C.

    Sulphate action severely affects the durability of marine structures. It is imperative to study precisely the effects of magnesium sulphate on pile foundations in the marine environment. In the present paper an attempt is made to assess and analyse...

  1. Dynamic Soil-Pile Interaction for large diameter monopile foundations

    DEFF Research Database (Denmark)

    Zania, Varvara

    2013-01-01

    of the study is to analyse the dynamic interaction of the soil and a single pile embedded in it by accounting for the geometric and stiffness properties of the pile. In doing so, a semi – analytical approach is adopted based on the fundamental solution of horizontal pile vibration by Novak and Nogami (1977...... eigenfrequencies of the soil layer do not affect the soil – pile interaction. The decrease of the eigefrequency of the OWT depends on the aforementioned variation of the dynamic stiffness and the slenderness ratio of the monopile.......Monopile foundations have been used in a large extent to support offshore wind turbines (OWT), being considered as a reliable and cost effective design solution. The accurate estimation of their dynamic response characteristics is essential, since the design of support structures for OWTs has been...

  2. Turbulent combustion modelization via a tabulation method of detailed kinetic chemistry coupled to Probability Density Function. Application to aeronautical engines; Modelisation de la combustion turbulente via une methode tabulation de la cinetique chimique detaillee couplee a des fonctions densites de probabilite. Application aux foyers aeronautiques

    Energy Technology Data Exchange (ETDEWEB)

    Rullaud, M

    2004-06-01

    A new modelization of turbulent combustion is proposed with detailed chemistry and probability density functions (PDFs). The objective is to capture temperature and species concentrations, mainly the CO. The PCM-FTC model, Presumed Conditional Moment - Flame Tabulated Chemistry, is based on the tabulation of laminar premixed and diffusion flames to capture partial pre-mixing present in aeronautical engines. The presumed PDFs is introduced to predict averaged values. The tabulation method is based on the analysis of the chemical structure of laminar premixed and diffusion flames. Hypothesis are presented, tested and validated with Sandia experimental data jet flames. Then, the model is introduced in a turbulent flow simulation software. Three configurations are retained to quantify the level of prediction of this formulation: the D and F-Flames of Sandia and lifted jet flames of methane/air of Stanford. A good agreement is observed between experiments and simulations. The validity of this method is then demonstrated. (author)

  3. Studies on solid-state physics carried out with the Saclay reactor (1962); Etudes de physique du solide realisees a la pile de Saclay (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Herpin, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    This paper deals only with solid-state physics experiments carried out on outgoing beams: rather than giving a general review of the work performed, if refers to only a few of the most important studies or those nearest completion. These are being made with the experimental beams of the two Saclay reactors EL-2, with a central flux of 10{sup 13} n/cm{sup 2}, and - since 1958 - EL-3, whose central flux is equal ta 10{sup 14} n/cm{sup 2}. The experiments are being carried out by two separate groups of physicists, employing different techniques, namely neutron diffraction using a crystal spectrometer, and inelastic scattering using a time-of-flight spectrometer. (author) [French] Cet expose ne relate que des experiences de physique du solide faites sur des faisceaux sortis; plutot que de donner une revue de l'ensemble des travaux effectues, on ne cite que quelques etudes que l'on peut considerer comme plus essentielles ou mieux achevees. On utilise les faisceaux experimentaux des deux piles de Saclay, EL-2 dont le flux au centre est de 10{sup 13}n/cm{sup 2} et, depuis 1958, EL-3 pour laquelle il est egal a 10{sup 14} n/cm{sup 2}. Les experiences sont realisees par deux groupes de physiciens distincts, employant des techniques differentes, la diffraction des neutrons qui utilise un spectrometre a cristal, et la diffusion inelastique avec un spectrometre a temps de vol. (auteur)