WorldWideScience

Sample records for collecting anatomical joint

  1. The Fate of Anatomical Collections

    NARCIS (Netherlands)

    Knoeff, Rina; Zwijnenberg, Robert

    2015-01-01

    Almost every medical faculty possesses anatomical and/or pathological collections: human and animal preparations, wax- and other models, as well as drawings, photographs, documents and archives relating to them. In many institutions these collections are well-preserved, but in others they are poorly

  2. The peroneocuboid joint: morphogenesis and anatomical study.

    Science.gov (United States)

    Guimerá, V; Lafuente, A; Zambrana, L; Rodriguez-Niedenführ, M; Sañudo, J R; Vazquez, T

    2015-01-01

    The peroneocuboid joint, between the peroneus longus tendon and the cuboid bone, has not been anatomically well-defined and no embryological study has been published. Furthermore, the ossification of the os peroneum (a sesamoid inside the peroneus longus tendon) and its associated pathology has been considered to be generated by orthostatic and/or mechanical loads. A light microscopy analysis of serially sectioned human embryonic and fetal feet, the analysis of human adult feet by means of standard macroscopic dissection, X-ray and histological techniques have been carried out. The peroneus longus tendon was fully visible until its insertion in the 1st metatarsal bone already at embryonic stage 23 (56-57 days). The peroneocuboid joint cavity appeared at the transition of the embryonic to the fetal period (8-9th week of gestation) and was independent of the proximal synovial sheath. The joint cavity extended from the level of the calcaneocuboid joint all the way to the insertion of the peroneus longus tendon in the 1st metatarsal bone. The frenular ligaments, fixing the peroneus longus tendon to the 5th metatarsal bone or the long calcaneocuboid ligament, developed in the embryonic period. The peroneus longus tendon presented a thickening in the area surrounding the cuboid bone as early as the fetal period. This thickening may be considered the precursor of the os peroneum and was similar in shape and in size relation to the tendon, to the os peroneum observed in adults. To the best of our knowledge, this is the first study to show that the os peroneum, articular facets of the peroneus longus tendon and cuboid bone, the peroneocuboid joint and the frenular ligaments appear during the embryonic/fetal development period and therefore they can not be generated exclusively by orthostatic and mechanical forces or pathological processes.

  3. Kinematic and dynamic analysis of an anatomically based knee joint.

    Science.gov (United States)

    Lee, Kok-Meng; Guo, Jiajie

    2010-05-01

    This paper presents a knee-joint model to provide a better understanding on the interaction between natural joints and artificial mechanisms for design and control of rehabilitation exoskeletons. The anatomically based knee model relaxes several commonly made assumptions that approximate a human knee as engineering pin-joint in exoskeleton design. Based on published MRI data, we formulate the kinematics of a knee-joint and compare three mathematical approximations; one model bases on two sequential circles rolling a flat plane; and the other two are mathematically differentiable ellipses-based models with and without sliding at the contact. The ellipses-based model taking sliding contact into accounts shows that the rolling-sliding ratio of a knee-joint is not a constant but has an average value consistent with published measurements. This knee-joint kinematics leads to a physically more accurate contact-point trajectory than methods based on multiple circles or lines, and provides a basis to derive a knee-joint kinetic model upon which the effects of a planar exoskeleton mechanism on the internal joint forces and torque during flexion can be numerically investigated. Two different knee-joint kinetic models (pin-joint approximation and anatomically based model) are compared against a condition with no exoskeleton. The leg and exoskeleton form a closed kinematic chain that has a significant effect on the joint forces in the knee. Human knee is more tolerant than pin-joint in negotiating around a singularity but its internal forces increase with the exoskeleton mass-to-length ratio. An oversimplifying pin-joint approximation cannot capture the finite change in the knee forces due to the singularity effect.

  4. [Antique anatomical collections for contemporary museums].

    Science.gov (United States)

    Nesi, Gabriella; Santi, Raffaella

    2013-01-01

    Anatomy and Pathology Museum collections display a great biological value and offer unique samples for research purposes. Pathological specimens may be investigated by means of modern radiological and molecular biology techniques in order to provide the etiological background of disease, with relevance to present-day knowledge. Meanwhile, historical resources provide epidemiologic data regarding the socio-economic conditions of the resident populations, the more frequently encountered illnesses and dietary habits. These multidisciplinary approaches lead to more accurate diagnoses also allowing new strategies in cataloguing and musealization of anatomical specimens. Further, once these data are gathered, they may constitute the basis of riedited Museum catalogues feasible to be digitalized and displayed via the Web.

  5. Auxiliary anatomical labels for joint segmentation and atlas registration

    Science.gov (United States)

    Gass, Tobias; Szekely, Gabor; Goksel, Orcun

    2014-03-01

    This paper studies improving joint segmentation and registration by introducing auxiliary labels for anatomy that has similar appearance to the target anatomy while not being part of that target. Such auxiliary labels help avoid false positive labelling of non-target anatomy by resolving ambiguity. A known registration of a segmented atlas can help identify where a target segmentation should lie. Conversely, segmentations of anatomy in two images can help them be better registered. Joint segmentation and registration is then a method that can leverage information from both registration and segmentation to help one another. It has received increasing attention recently in the literature. Often, merely a single organ of interest is labelled in the atlas. In the presense of other anatomical structures with similar appearance, this leads to ambiguity in intensity based segmentation; for example, when segmenting individual bones in CT images where other bones share the same intensity profile. To alleviate this problem, we introduce automatic generation of additional labels in atlas segmentations, by marking similar-appearance non-target anatomy with an auxiliary label. Information from the auxiliary-labeled atlas segmentation is then incorporated by using a novel coherence potential, which penalizes differences between the deformed atlas segmentation and the target segmentation estimate. We validated this on a joint segmentation-registration approach that iteratively alternates between registering an atlas and segmenting the target image to find a final anatomical segmentation. The results show that automatic auxiliary labelling outperforms the same approach using a single label atlasses, for both mandibular bone segmentation in 3D-CT and corpus callosum segmentation in 2D-MRI.

  6. Complex motion tomography of the sacroiliac joint. An anatomical and roentgenological study

    Energy Technology Data Exchange (ETDEWEB)

    Dijkstra, P.F.; Vleeming, A.; Stoeckart, R.

    1989-06-01

    To find a better method for diagnosing sacroiliac (SI) joint disease, an anatomical approach was combined with conventional roentgenology, complex motion tomography and computed tomography. Complex motion tomography is suggested as the method of choice in the investigation of the SI-joint. Because of its complex (sinusoidal) form, the dorsal portion of the joint has to be tomographed in frontal projection and the middle and ventral portions in oblique projection. In 56 patients, referred for probable ankylosing spondylitis, 72 SI joints were investigated. Based on plain radiography six and on frontal tomography five SI joints were diagnosed as normal. However, based on oblique tomography 31 joints were diagnosed as normal. (orig.).

  7. Anatomical and physiological considerations regarding the temporomandibular joint.

    Science.gov (United States)

    Boering, G

    1979-12-01

    The structure and function of the human temporomandibular joint has concerned several investigators but still fundamental questions exist and require further examination. A profound knowledge of the normal anatomy and histology of the temporomandibular joint is necessary to understand its function and functional disturbances. It is also necessary for a good understanding of clinical findings and the interpretation of radiographs. In this paper a clinically orientated description has been given of the anatomy and histology of the mandibular head, the articular fossa and eminence, the articular disc, the capsule and ligaments, the synovial membrane, the innervation of the joint and the normal relationship between the different components. About the physiology of the temporomandibular joint many controversial theories exist. A lot of research has still to be done, especially in the field of the co-ordination of the function of both joints, the muscles and the dentition.

  8. Ambulatory estimation of knee-joint kinematics in anatomical coordinate system using accelerometers and magnetometers.

    Science.gov (United States)

    Kun, Liu; Inoue, Yoshio; Shibata, Kyoko; Enguo, Cao

    2011-02-01

    Knee-joint kinematics analysis using an optimal sensor set and a reliable algorithm would be useful in the gait analysis. An original approach for ambulatory estimation of knee-joint angles in anatomical coordinate system is presented, which is composed of a physical-sensor-difference-based algorithm and virtual-sensor-difference-based algorithm. To test the approach, a wearable monitoring system composed of accelerometers and magnetometers was developed and evaluated on lower limb. The flexion/extension (f/e), abduction/adduction (a/a), and inversion/extension (i/e) rotation angles of the knee joint in the anatomical joint coordinate system were estimated. In this method, since there is no integration of angular acceleration or angular velocity, the result is not distorted by offset and drift. The three knee-joint angles within the anatomical coordinate system are independent of the orders, which must be considered when Euler angles are used. Besides, since there are no physical sensors implanted in the knee joint based on the virtual-sensor-difference-based algorithm, it is feasible to analyze knee-joint kinematics with less numbers and types of sensors than those mentioned in some others methods. Compared with results from the reference system, the developed wearable sensor system is available to do gait analysis with fewer sensors and high degree of accuracy.

  9. [The pathology of temporomandibular joint luxations--anatomical studies on temporomandibular joint preparations].

    Science.gov (United States)

    Pinkert, R

    1976-01-01

    After a description of the published hypothesis of luxation and subluxation in the temporomandibular joint the preparations of five temporomandibular joints is described. The results refer to the movement of the discus and the capitulum mandibulae and to the effects of the musculus temporalis and of the facies articularis ossis temporalis. In addition a hypothesis is established according to which the temporomandibular-joint-luxation may be considered to occur in the menisco-condylar part of the joint.

  10. Arthroscopic procedures and therapeutic results of anatomical reconstruction of the coracoclavicular ligaments for acromioclavicular Joint dislocation.

    Science.gov (United States)

    Takase, K; Yamamoto, K

    2016-09-01

    Surgical treatment is recommended for type 5 acromioclavicular joint dislocation on Rockwood's classification. We believe that anatomic repair of the coracoclavicular ligaments best restores the function of the acromioclavicular joint. We attempted to correctly reconstruct the anatomy of the coracoclavicular ligaments under arthroscopy, and describe the minimally invasive arthroscopic procedure. There were 22 patients; mean age at surgery, 38.1 years. Mean time to surgery was 13.2 days. Mean follow-up was 3 years 2 months. The palmaris longus tendon was excised from the ipsilateral side to replace the conoid ligament, while artificial ligament was used for reconstructing the trapezoid ligament. Both ligament reconstructions were performed arthroscopically. No temporary fixation of the acromioclavicular joint was performed. On postoperative radiographic evaluation, 4 patients showed subluxation and 2 showed dislocation of the acromioclavicular joint; the other 16 patients had maintained reduction at the final consultation. MR images 1year after surgery clearly revealed the reconstructed ligaments in 19 patients. Only 1 patient showed osteoarthritis of the acromioclavicular joint. Although it requires resection of the ipsilateral palmaris longus for grafting, we believe that anatomic reconstruction of both coracoclavicular ligaments best restores the function of the acromioclavicular joint. 4. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  11. The clinico-anatomic explanation for tibial intraneural ganglion cysts arising from the superior tibiofibular joint

    Energy Technology Data Exchange (ETDEWEB)

    Spinner, Robert J. [Mayo Clinic, Department of Neurologic Surgery, Rochester, Minnesota (United States); Mayo Clinic, Department of Orthopedic Surgery, Rochester, Minnesota (United States); Mayo Clinic, Department of Anatomy, Rochester, Minnesota (United States); Mokhtarzadeh, Ali; Schiefer, Terry K. [Mayo Clinic College of Medicine, Rochester, Minnesota (United States); Krishnan, Kartik G. [Carl Gustav Carus University Hospital, Department of Neurological Surgery, Dresden (Germany); Kliot, Michel [University of Washington, Department of Neurosurgery, Seattle, Washington (United States); Amrami, Kimberly K. [Mayo Clinic, Department of Radiology, Rochester, Minnesota (United States)

    2007-04-15

    To demonstrate that tibial intraneural ganglia in the popliteal fossa are derived from the posterior portion of the superior tibiofibular joint, in a mechanism similar to that of peroneal intraneural ganglia, which have recently been shown to arise from the anterior portion of the same joint. Retrospective clinical study and prospective anatomic study. The clinical records and MRI findings of three patients with tibial intraneural ganglion cysts were analyzed and compared with those of one patient with a tibial extraneural ganglion cyst and one volunteer. Seven cadaveric limbs were dissected to define the articular anatomy of the posterior aspect of the superior tibiofibular joint. The condition of the three patients with intraneural ganglia recurred because their joint connections were not identified initially. In two patients there was no cyst recurrence when the joint connection was treated at revision surgery; the third patient did not wish to undergo additional surgery. The one patient with an extraneural ganglion had the joint connection identified at initial assessment and had successful surgery addressing the cyst and the joint connection. Retrospective evaluation of the tibial intraneural ganglion cysts revealed stereotypic features, which allowed their accurate diagnosis and distinction from extraneural cases. The intraneural cysts had tubular (rather than globular) appearances. They derived from the postero-inferior portion of the superior tibiofibular joint and followed the expected course of the articular branch on the posterior surface of the popliteus muscle. The cysts then extended intra-epineurially into the parent tibial nerves, where they contained displaced nerve fascicles. The extraneural cyst extrinsically compressed the tibial nerve but did not directly involve it. All cadaveric specimens demonstrated a small single articular branch, which derived from the tibial nerve to the popliteus. The branch coursed obliquely across the posterior

  12. Evaluation of Anatomical and Functional Hip Joint Center Methods: The Effects of Activity Type, Gender, and Proximal Reference Segment.

    Science.gov (United States)

    McGibbon, C A; Fowler, J; Chase, S; Steeves, K; Landry, J; Mohamed, A

    2016-01-01

    Accurate hip joint center (HJC) location is critical when studying hip joint biomechanics. The HJC is often determined from anatomical methods, but functional methods are becoming increasingly popular. Several studies have examined these methods using simulations and in vivo gait data, but none has studied high-range of motion activities, such a chair rise, nor has HJC prediction been compared between males and females. Furthermore, anterior superior iliac spine (ASIS) marker visibility during chair rise can be problematic, requiring a sacral cluster as an alternative proximal segment; but functional HJC has not been explored using this approach. For this study, the quality of HJC measurement was based on the joint gap error (JGE), which is the difference in global HJC between proximal and distal reference segments. The aims of the present study were to: (1) determine if JGE varies between pelvic and sacral referenced HJC for functional and anatomical methods, (2) investigate which functional calibration motion results in the lowest JGE and if the JGE varies depending on movement type (gait versus chair rise) and gender, and (3) assess whether the functional HJC calibration results in lower JGE than commonly used anatomical approaches and if it varies with movement type and gender. Data were collected on 39 healthy adults (19 males and 20 females) aged 14-50 yr old. Participants performed four hip "calibration" tests (arc, cross, star, and star-arc), as well as gait and chair rise (activities of daily living (ADL)). Two common anatomical methods were used to estimate HJC and were compared to HJC computed using a published functional method with the calibration motions above, when using pelvis or sacral cluster as the proximal reference. For ADL trials, functional methods resulted in lower JGE (12-19 mm) compared to anatomical methods (13-34 mm). It was also found that women had significantly higher JGE compared to men and JGE was significantly higher for

  13. Effect of anatomical landmark perturbation on mean helical axis parameters of in vivo upper costovertebral joints.

    Science.gov (United States)

    Beyer, Benoît; Sholukha, Victor; Salvia, Patrick; Rooze, Marcel; Feipel, Véronique; Van Sint Jan, Serge

    2015-02-05

    The literature concerning quantification of costovertebral joint (CVJ) motion under in vivo conditions is scarce. Most papers concerning this topic are related to ex vivo loading conditions. In vivo protocols are available from the literature to determine rib and vertebra kinematics but new developments are needed to improve data processing concerning CVJ behaviour obtained from discrete breathing positions showing limiting ranges-of-motion and sensitive to noise. Data from previous work were used to implement a method analyzing mean helical axis (MHA) and pivot point parameters of the CVJ complexes. Several levels of noises were estimated within Monte-Carlo simulations to optimize MHA results. MHA parameters were then used to transform and define a CVJ-specific local coordinate system. This study proposes an improvement for CVJ kinematics processing and description from in vivo data obtained from computed tomography. This methodology emphasizes the possibility to work with variability of MHA parameters using Monte-Carlo procedures on anatomical landmark coordinates and to define a local coordinate system from this particular joint behaviour. Results from the CVJ joint model are closer to a hinge joint (secondary motions inferior to 3°) when anatomical frames are expressed from MHA orientation. MHA orientation and position data obtained from the proposed method are relevant according to angular dispersion obtained (from 7.5° to 13.9°) and therefore relevant to define behaviour of CVJ. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Innervation of the elbow joint: Is total denervation possible? A cadaveric anatomic study.

    Science.gov (United States)

    De Kesel, Renata; Van Glabbeek, Francis; Mugenzi, Dominique; De Vos, Joris; Vermeulen, Katrien; Van Renterghem, Debbie; Bortier, Hilde; Schuind, Frédéric

    2012-09-01

    The aim of this anatomical study was to find out if total denervation of the elbow joint is technically feasible. The endbranches of the brachial plexus of eight fresh-frozen upper arm cadavers were dissected with optical loupe magnification. All major nerves of the upper limb (except the axillary and the medial brachial cutaneous nerve) give some terminal articular endbranches to the elbow. The articular endbranches arise from muscular endbranches, cutaneous endbranches, or arise straight from the main nerves of the brachial plexus. A topographic diagram was made of the different nerves innervating the elbow joint. The ulno-posterior part of the elbow is innervated by the ulnar nerve and some branches of medial antebrachial cutaneous nerve. The radial-posterior part of the elbow is innervated exclusively by the radial nerve. The ulno-anterior part of the elbow is innervated by the median nerve and the musculocutaneous nerve. The radio-anterior part of the elbow is innervated by the radial nerve and the musculocutaneous nerve. These elbow innervation findings are relevant to both anatomical and clinical field as they provide evidence that the total denervation of the elbow joint is impossible. Nevertheless, partial denervation, like denervation of the lateral epicondyle or the ulnar part of elbow, is technically possible.

  15. The glenohumeral joint of hominoid primates: locomotor correlates, anatomical variation and evolution

    OpenAIRE

    Arias Martorell, Júlia

    2014-01-01

    [spa] La Tesis Doctoral con título "the glenohumeral joint of hominoid primates: locomotor correlates, anatomical variation and evolution" trata sobre las adaptaciones anatómicas en la articulación del hombro (articulación glenohumeral) de los primates hominoideos. La acción de las fuerzas ejercidas durante la locomoción modelan la forma de la articulación, determinado el rango de movimientos que los animales pueden alcanzar. Los primates hominoideos destacan por tener articulaciones muy móvi...

  16. Custom Anatomical 3D Spacer for Temporomandibular Joint Resection and Reconstruction

    Science.gov (United States)

    Green, John Marshall; Lawson, Sarah T.; Liacouras, Peter C.; Wise, Edward M.; Gentile, Michael A.; Grant, Gerald Thomas

    2015-01-01

    Two cases are presented using a two-stage approach and a custom antibiotic spacer placement. Temporomandibular reconstruction can be very demanding and accomplished with a variety of methods in preparation of a total joint and ramus reconstruction with total joint prostheses (TMJ Concepts, Ventura, CA). Three-dimensional reconstructions from diagnostic computed tomography were used to establish a virtually planned resection which included the entire condyle-ramus complex. From these data, digital designs were used to manufacture molds to facilitate intraoperative fabrication of precise custom anatomic spacers from rapidly setting antibiotic-impregnated polymethyl methacrylate. Molds were manufactured using vat polymerization (stereolithography) with a photopolymer in the first case and powder bed fusion (electron beam melting) with Ti6AL4V for the second. Surgical methodology and the use of molds for intraoperative spacer fabrication for each case are discussed. PMID:26889353

  17. Anatomical basics, variations, and degenerative changes of the shoulder joint and shoulder girdle

    Energy Technology Data Exchange (ETDEWEB)

    Prescher, Andreas E-mail: dkeyserlingk@post.klinikum.rwth-aachen.de

    2000-08-01

    This paper summarizes the anatomical basics of the shoulder, their variations, and precise definitions, including differential diagnoses. It also describes the characteristic degenerative changes caused by aging. A typical variation (7-15%) is the os acromiale, which forms the triangular epiphysis of the scapular spine. This abnormality must be differentiated from a fracture of the acromion or a pseudarthrosis. Because ossification of the acromion is complete after age 25, the os acromiale should be diagnosed only after this age. The shape of the acromion is a further important feature. In a recent anatomical study, the following frequencies of the Bigliani-types of the acromial shape were anatomically determined - type 1 (flat), 10.2% and type 2 (curved), 89.8%. Type 3 (hooked) was not observed, which indicates that this type is probably a misinterpretation of the so-called acromial spur. Minor dehiscences and perforations in the infraspinate or supraspinate fossa should not be confused with malignant osteolyses. The scapula has three ligaments of its own, (1) the coracoacromial ligament and its osseous fixations form an osteofibrous arch above the shoulder joint, which plays a part in impingement syndrome; (2) the superior transverse scapular ligament or its ossified correlate arches the scapular incisure and can cause a typical compression syndrome of the suprascapular nerve; (3) the inferior transverse scapular ligament is of no great clinical importance. Two intraarticular structures (glenoid labrum and tendon of the long bicipital head) must be mentioned. The glenoid labrum consists of dense connective tissue and surrounds the margin of the glenoid cavity. Two areas exhibit specialized conditions, cranial at the supraglenoid tubercle an intimate relationship exists to the tendon of the long bicipital head and in about 55% of cases, the labrum is stretched over the glenoid rim at the ventral side. At the area of the biceps-tendon-labrum complex, so-called SLAP

  18. Anatomical principles for minimally invasive reconstruction of the acromioclavicular joint with anchors.

    Science.gov (United States)

    Xiong, Chuanzhi; Lu, Yaojia; Wang, Qiang; Chen, Gang; Hu, Hansheng; Lu, Zhihua

    2016-11-01

    The aim of this study was to evaluate the outcome of a minimally invasive surgical technique for the treatment of patients with acromioclavicular joint dislocation. Sixteen patients with complete acromioclavicular joint dislocation were enrolled in this study. All patients were asked to follow the less active rehabilitation protocol post-operatively. Computed tomography with 3-D reconstruction of the injured shoulder was performed on each patient post operatively for the assessment of the accuracy of the suture anchor placement in the coracoid process and the reduction of the acromioclavicular joint. Radiographs of Zanca view and axillary view of both shoulders were taken for evaluating the maintenance of the acromioclavicular joint reduction at each follow-up visit. The Constant shoulder score was used for function assessment at the final follow-up. Twenty seven of the 32 anchors implanted in the coracoid process met the criteria of good position. One patient developed complete loss of reduction and another had partial loss of reduction in the anteroposterior plane. For the other 14 patients, the mean Constant score was 90 (range, 82-95). For the patients with partial and complete loss of reduction, the Constant score were 92 and 76 respectively. All of them got nearly normal range of motion of the shoulders and restored to pre-operative life and works. With this minimally invasive approach and limited exposure of the coracoid, a surgeon can place the suture anchors at the anatomical insertions of the coracoclavicular ligament and allow the dislocated joint reduced and maintained well. Level IV, Case series; therapeutic study.

  19. The Anatomic Study on Replacement of Artificial Atlanto-odontoid Joint through Transoral Approach

    Institute of Scientific and Technical Information of China (English)

    Yong Hu; Shuhua YANG; Hui XIE; Xianfeng HE; Rongming XU; Weihu MA; Jianxiang FENG; Qiu CHEN

    2008-01-01

    In order to provide anatomical basis for transoral approach (TOA) in dealing with the ventro lesions of craniocervical junction, and the design and application of artificial atlanto-odontoid joint, microsurgical dissecting was performed on 8 fresh craniocervical specimens layer by layer through transoropharyngeal approach. The stratification of posterior pharyngeal wall, course of vertebral artery, adjacent relationship of atlas and axis and correlative anatomical parameters of replacement of artificial atlanto-odontoid joint were observed. Besides, 32 sets of atlanto-axial joint in adults' fresh bony specimens were measured with a digital caliper and a goniometer, including the width of bony window of anterior arch of atlas, the width of bony window of axis vertebra, the distance between superior and inferior two atlas screw inserting points, the distance between two axis screw inserting points etc. It was found that the width of atlas and axis which could be exposed were 40.2±3.5mm and 39.3±3.7mm respectively. The width and height of posterior pharyngeal wall which could be exposed were 40.1±5.2mm and 50.2±4.6mm respectively. The distance between superior and inferior two atlas screw inserting points was 28.0±2.9mm and 24.0±3.5mm respectively, and the distance of bilateral axis screw inserting points was 18.0±1.2mm. The operative exposure position through TOA ranged from inferior part of the clivus to the superior part of the C3 vertebral body. Posterior pharyngeal wall consisted of 5 layers and two interspaces: mucosa, submucosa, superficial muscular layer, anterior fascia of vertebrae, anterior muscular layer of vertebrae and posterior interspace of pharynx, anterior interspace of vertebrae. This study revealed that it had the advantages of short operative distance, good exposure and sufficient decompression in dealing with the ventro lesions from the upper cervical to the lower clivus through the TOA. The replacement of artificial atlanto-odontoid joint

  20. Computerized measurements of radiographic anatomical parameters of the elbow joint in Bernese Mountain Dogs.

    Science.gov (United States)

    Stein, S; Schmoekel, H G; Waibl, H; Brunnberg, L

    2012-01-01

    Comparison of two methods for evaluation of anatomical parameters of elbow joints in Bernese Mountain Dogs. Radiographic analysis. Nine hundred and thirty-one radiographs of elbow joints from 305 Bernese Mountain Dogs. The angles OL, PA, RA and UL were measured according to the Mues method and the Radius of the humeral condyle, Opening angle beta, Quotient Q and Ae, Area X, Step 1 and Step 2 according to the Viehmann method. The radiographs were divided according to their angle of flexion into five groups: 0-30°, 31-60°, 61-90°, 91-120° and >120°. The difference and the correlation between measured values and the elbow dysplasia (ED) score was calculated and compared. The average values of angle OL, PA and RA, Area X, Step 1 and Step 2 were significantly different within the different elbow flexion angle groups. The values of Opening angle beta, Quotients Q and Ae as well as Radius of the humeral condyle varied independently from the degree of the elbow flexion on the radiograph. The angles OL, PA and RA and the Radius of the humeral condyle, the Opening angle beta, the Quotients Q and Ae, Step 1 and Step 2 correlated with the ED score. In contrast to the method of Mues, the majority of the measured parameters of the method of Viehmann were not influenced by the degree of flexion of the elbow joint and correlated with the ED score. The method of Viehmann warrants consideration for the evaluation of radiographs of elbow joints in the Bernese Mountain Dog for ED.

  1. Joint Graph Layouts for Visualizing Collections of Segmented Meshes

    KAUST Repository

    Ren, Jing

    2017-09-12

    We present a novel and efficient approach for computing joint graph layouts and then use it to visualize collections of segmented meshes. Our joint graph layout algorithm takes as input the adjacency matrices for a set of graphs along with partial, possibly soft, correspondences between nodes of different graphs. We then use a two stage procedure, where in the first step, we extend spectral graph drawing to include a consistency term so that a collection of graphs can be handled jointly. Our second step extends metric multi-dimensional scaling with stress majorization to the joint layout setting, while using the output of the spectral approach as initialization. Further, we discuss a user interface for exploring a collection of graphs. Finally, we show multiple example visualizations of graphs stemming from collections of segmented meshes and we present qualitative and quantitative comparisons with previous work.

  2. Verification of selected anatomic landmarks used as reference points for universal goniometer positioning during knee joint mobility range measurements.

    Science.gov (United States)

    Szulc, P; Lewandowski, J; Marecki, B

    2001-01-01

    The study was concerned with verification of the selection of reference points used for knee joint mobility range goniometry. The verification was based on photometric and electrogoniometric methods of femorotibial angle measurements. The material for measurements were three knee joint preparations. The obtained data were subjected to descriptive analysis; photographic documentation of geometric relations between the reference points was also prepared. Considerable divergence of measurement results was observed with respect to the actual knee joint flexion angle, amounting even to 16 degrees. The differences are due to the selection of anatomic landmarks, and depend in particular on the distance of the point to which the goniometer axis is applied from the approximate location of the mechanical joint axis. The corrections of knee joint flexion angle measurements were also estimated on the basis of data obtained from the photographs and the derived mathematical formula.

  3. Hindlimb muscle anatomical mechanical advantage differs among joints and stride phases in basilisk lizards.

    Science.gov (United States)

    Bergmann, Philip J; Hare-Drubka, Meredith

    2015-08-01

    The vertebrate musculoskeletal system is composed of skeletal levers powered by muscles. Effective mechanical advantage (EMA) and muscle properties influence organismal performance at various tasks. Anatomical mechanical advantage (AMA) is a proxy for EMA that facilitates the study of preserved specimens when many muscles or many species are of interest. AMA is the quotient of in-lever to out-lever length, and quantifies the force-velocity trade-off of a lever, where high AMAs translate into high force, low velocity levers. We studied AMAs, physiological cross-sectional areas (PCSAs), fiber lengths, and fiber widths for 20 hindlimb muscles of the lizard Basiliscus vittatus, moving the hip, knee, and ankle during both the stance and swing phases of the stride. We tested the hypotheses that muscles moving proximal limb joints, and those active during stance, would have characteristics that maximize force. We also tested whether adults had more force-optimized levers than juveniles to compensate for higher body mass. We found no differences between adults and juveniles, but found differences among joints and between stride phases. AMAs were lowest and PCSAs highest for the knee, and PCSA was higher for stance than swing muscles. Fiber width decreased distally, but did not differ between stride phases. Fiber length of stance muscles decreased distally and was highest for swing muscles of the knee. Our findings show that different muscle and lever characteristics allow the knee to be both force- and velocity-optimized, indicating its important role in locomotion. Copyright © 2015 Elsevier GmbH. All rights reserved.

  4. Predicting cortical ROIs via joint modeling of anatomical and connectional profiles.

    Science.gov (United States)

    Zhang, Tuo; Zhu, Dajiang; Jiang, Xi; Ge, Bao; Hu, Xintao; Han, Junwei; Guo, Lei; Liu, Tianming

    2013-08-01

    Localization of cortical regions of interests (ROIs) in structural neuroimaging data such as diffusion tensor imaging (DTI) and T1-weighted MRI images has significant importance in basic and clinical neurosciences. However, this problem is considerably challenging due to the lack of quantitative mapping between brain structure and function, which relies on the availability of multimodal training data including benchmark task-based functional MRI (fMRI) images and effective machine learning algorithms. This paper presents a novel joint modeling approach that learns predictive models of ROIs from concurrent task-based fMRI, DTI, and T1-weighted MRI datasets. In particular, the effective generalized multiple kernel learning (GMKL) algorithm and ROI coordinate principal component analysis (PCA) model are employed to infer the intrinsic relationships between anatomical T1-weighted MRI/connectional DTI features and task-based fMRI-derived functional ROIs. Then, these predictive models of cortical ROIs are evaluated by cross-validation studies, independent datasets, and reproducibility studies. Experimental results are promising. We envision that these predictive models can be potentially applied in many scenarios that have only DTI and/or T1-weighted MRI data, but without task-based fMRI data. Copyright © 2013 Elsevier B.V. All rights reserved.

  5. Quantitative anatomic study of atlanto-odontoid joint and design of an artificial atlanto-odontoid joint for the orthopedic clinic

    Institute of Scientific and Technical Information of China (English)

    HU Yong; YANG Shu-hua; XIE Hui; XU Rong-ming; MA Wei-hu

    2007-01-01

    Objective: To observe and measure morphological parameters of the Chinese atlanto-odontoid joint anatomically in order to provide an anatomic data for designing artificial atlanto-odontoid joint used for substituting the destroyed atlanto-odontoid joint in the orthopedic clinic. Methods: The relative anatomic parameters of 32 sets of fresh Chinese adults'atlanto-odontoid joint specimens were measured with a digital caliper and a goniometer, including the width of anterior arch of atlas (AW), the thickness of atlas at the junction of anterior arch and lateral mass (AD), the thickness and height of anterior tubercle of atlas (AT and AH), the middle height, length and width of the lateral mass (MHL, L and LW), the height, transverse and anteroposterior distance of odontoid process(DH, DW and DD), the retroversion angle of odontoid process (β°),the facial angle of odontoid process (θ°)and so on. The data were statistically analyzed in order to ascertain the morphological parameter ranges of artificial atlanto-odontoid joint. An artificial atlanto-odontoid joint was designed according to these data. The operations of anlanto-odontoid joint arthroplasty were conducted in 3 cases of adult cadaver specimens. Results: The width of AW was (20.45±1.53)mm, AD (3.91±1.32)mm, AT and AH (9.43±1.93)mm and(10.23±1.32)mm, respectively, MHL and LW (13.68±1.38)mm and (12.98±1.52)mm, respectively, DH (15.25±2.11)mm, DW and DD (9.69±1.38)mm and(11.26±1.02)mm, respectively, β°(12.23±4.27) degree, θ°(65.48±2.17) degree. The prosthesis was composed of atlas part, axis part and accessories. Neither the vertebral artery nor the medulla oblongata was injured. Conclusions: The design of artificial atlanto-odontoid joint is feasible according to these parameters. The artificial joint can not only rebuild the stability of atlanto-axial joint, but also reserve the rotation function between atlas and axis. Every part of the joint has their own parameter ranges in purpose to firm

  6. "IN ALL ITS HIDEOUS AND APPALLING NAKEDNESS AND TRUTH": THE RECEPTION OF SOME ANATOMICAL COLLECTIONS IN GEORGIAN AND VICTORIAN ENGLAND.

    Science.gov (United States)

    Talairach-Vielmas, Laurence

    2015-01-01

    This article explores the reception of some anatomical collections in Georgian and Victorian England. Both private medical museums and public anatomical museums reflected the central role played by anatomy in medical knowledge and education in the eighteenth and nineteenth centuries. However, because they were associated with death and sexuality, anatomical museums were both products of enlightenment science and potentially immoral loci likely to corrupt young and innocent women. But, as this article shows, the reasons behind the hostile receptions of some collections varied throughout the centuries, revealing in so doing the gradual professionalization of the medical field and growing monopoly of medical professionals over medical knowledge.

  7. Rotational and translational stability of different methods for direct acromioclavicular ligament repair in anatomic acromioclavicular joint reconstruction.

    Science.gov (United States)

    Beitzel, Knut; Obopilwe, Elifho; Apostolakos, John; Cote, Mark P; Russell, Ryan P; Charette, Ryan; Singh, Hardeep; Arciero, Robert A; Imhoff, Andreas B; Mazzocca, Augustus D

    2014-09-01

    significantly increased distances for all 3 measure points when the clavicle was rotated posteriorly. Reconstruction of the AC ligament by direct wrapping and suturing of the remaining graft around the AC joint (group 1) was the most stable method and was the only one to show anterior rotation comparable with the native joint. In contrast, the transacromial technique (group 3) showed the most translation and rotation. An anatomic repair should address both the CC ligaments and the AC ligaments to control the optimal physiologic function (translation and rotation). © 2014 The Author(s).

  8. Anatomical substrates of cooperative joint-action in a continuous motor task: Virtual lifting and balancing

    NARCIS (Netherlands)

    Newman-Norlund, R.D.; Bosga, J.; Meulenbroek, R.G.J.; Bekkering, H.

    2008-01-01

    An emerging branch of social cognitive neuroscience attempts to unravel the critical cognitive mechanisms that enable humans to engage in joint action. In the current experiment, differences in brain activity in participants engaging in solitary action and joint action were identified using whole br

  9. [BOOSTING CITIZENS'AWARENESS: THE ANATOMICAL COLLECTIONS FOR TEACHING PAST AND PRESENT].

    Science.gov (United States)

    Vannozzi, Francesca

    2015-01-01

    The challenge of eight museums of the University Museum System of the University of Siena for years has been that of annually offering to Siena schools a course of learning on the themes of science. The learning workshop is articulated in a frontal lesson, followed by a visit of the class in the proponent museum to better expound the chosen theme by the teacher. The fundamental role for such a didactic proposal is sustained by the conserved collections in the museum, used in the past to facilitate the university professor in their lessons, and that continue to show a strong didactic value helping the young student to "enter" in a captivating and easy manner into the world of science. In particular, the Anatomical Museum "L. Comparini" has now organized for some years a course of learning using historical instruments, models in terracotta and wax, plastinates, and tables that consent the operator to confront, with young children, the theme of the history of anatomy and the ways and means for research, formation, and the distribution of the anatomical sciences.

  10. Validation of an anatomical coordinate system for clinical evaluation of the knee joint in upright and closed MRI.

    Science.gov (United States)

    Olender, Gavin; Hurschler, Christof; Fleischer, Benjamin; Friese, Karl-Ingo; Sukau, Andreas; Gutberlet, Marcel; Becher, Christoph

    2014-05-01

    A computerized method to automatically and spatially align joint axes of in vivo knee scans was established and compared to a fixed reference system implanted in a cadaver model. These computational methods to generate geometric models from static MRI images with an automatic coordinate system fitting proved consistent and accurate to reproduce joint motion in multiple scan positions. Two MRI platforms, upright and closed, were used to scan a phantom cadaver knee to create a three-dimensional, geometric model. The knee was subsequently scanned in several positions of knee bending in a custom made fixture. Reference markers fixed to the bone were tracked by an external infrared camera system as well as by direct segmentation from scanned images. Anatomical coordinate systems were automatically fitted to the segmented bone model and the transformations of joint position were compared to the reference marker coordinate systems. The tracked translation and rotation measurements of the automatic coordinate system were found to be below root mean square errors of 0.8 mm and 0.7°. In conclusion, the precision of the translation and rotational tracking is found to be sensitive to the scanning modality, albeit in upright or closed MRI, but still within comparative measures to previously performed studies. The potential to use segmented bone models for patient joint analysis could vastly improve clinical evaluation of disorders of the knee with continual application in future three-dimensional computations.

  11. Features of radiological and anatomical changes in bone of the hip joint due to injuries

    OpenAIRE

    2015-01-01

    Objective: To conduct a retrospective analysis of radiographs and CT scans for studying of typical changes in acetabulum (A) and proximal femur (F) in patients with the consequences of injuries in the area of the hip joint.Methods: We analyzed radiographs and CT scans in 106 patients. Patients were divided into groups: I — false joint of F neck, II – false joint at the level of per-, inter- and subtrochanteric area of F, III — post-traumatic avascular necrosis of F head, IV — posttraumatic co...

  12. High resolution surface coil magnetic resonance imaging of the joints: anatomic correlation.

    Science.gov (United States)

    Middleton, W D; Macrander, S; Lawson, T L; Kneeland, J B; Cates, J D; Kellman, G M; Carrera, G F; Foley, W D; Jesmanowicz, A; Hyde, J S

    1987-07-01

    Magnetic resonance imaging appears to be a particularly promising approach to the evaluation of articular and periarticular abnormalities. Its ability to produce images in multiple planes directly (without reconstruction) provides a unique advantage over CT for the radiologist when he attempts to interpret the complex three dimensional anatomy of most joints. The inherent contrast resolution of MR is excellent, and with the use of surface coils, spatial resolution is sufficient to permit the identification of the small soft tissue structures in and around joints. Artifacts generated by respiratory and cardiac motion are not a problem in MRI of the joints as they are in MR scanning of the body. Based on all these qualities, we believe that MRI will play an important role in the diagnosis of joint abnormalities.

  13. The posterior segment of the temporomandibular joint capsule and its anatomic relationship.

    Science.gov (United States)

    Mérida-Velasco, J Ramón; Rodríguez, J Francisco; de la Cuadra, Crótida; Peces, M Dolores; Mérida, J Antonio; Sánchez, Indalecio

    2007-01-01

    The aim of this work was to clarify the arrangement of the posterior segment of the temporomandibular joint capsule and its pertinent relationships. The temporomandibular region was dissected bilaterally in 20 adult cadavers. Natural stained latex was injected into 16 cadavers through the external carotid artery to facilitate the dissection of the arterial vessels. The posterior segment of the joint capsule is made up of the so-called "bilaminar zone" of the articular disc. The upper internal portion of the posterior segment of the capsule was reinforced by the discomalleolar ligament. The retroarticular space was filled with loose connective tissue and the anterior branches of the anterior tympanic artery were distributed throughout the posterior segment of the joint capsule. The posterior segment of the temporomandibular joint capsule corresponds to the bilaminar zone of the articular disc. The structures of the retroarticular space are extracapsular.

  14. The arterial blood supply of the temporomandibular joint: an anatomical study and clinical implications

    Energy Technology Data Exchange (ETDEWEB)

    Cuccia, Antonino Marco; Caradonna, Carola; Caradonna, Domenico [Dept. of Surgical and Oncological Disciplines, University of Palermo, Palermo (Italy); Anastasi, Giuseppe; Milardi, Demetrio; Favaloro, Angelo; Caradonna, Luigi; Cutroneo, Giuseppina [Biomorphology and Biotechnologies, University of Messina, Messina (Italy); De Pietro, Anita; Angileri, Tommaso Maurizio [Villa Santa Teresa, Diagnostica per Immagini, Palermo (Italy)

    2013-03-15

    The aim of this study was to analyze three-dimensional images of the arterial supply to the temporomandibular joint. Ten patients (five men and five women, mean age 36 years) without signs or symptoms of temporomandibular disorders, who underwent contrast-enhanced computed tomographic (CT) scanning with intravenous contrast, were studied. The direct volume rendering technique of CT images was used, and a data set of images to visualize the vasculature of the human temporomandibular joint in three dimensions was created. After elaboration of the data through post-processing, the arterial supply of the temporomandibular joint was studied. The analysis revealed the superficial temporal artery, the anterior tympanic artery, the deep temporal artery, the auricular posterior artery, the transverse facial artery, the middle meningeal artery, and the maxillary artery with their branches as the main arterial sources for the lateral and medial temporomandibular joint. The direct volume rendering technique was found to be successful in the assessment of the arterial supply to the temporomandibular joint. The superficial temporal artery and maxillary artery ran along the lateral and medial sides of the condylar neck, suggesting that these arteries are at increased risk during soft-tissue procedures such as an elective arthroplasty of the temporomandibular joint.

  15. Clinical effect of acute complete acromioclavicular joint dislocation treated with micro-movable and anatomical acromioclavicular plate.

    Science.gov (United States)

    Liu, Qingjun; Miao, Jianyun; Lin, Bin; Guo, Zhimin

    2012-01-01

    We evaluated the long-term clinical results of acute complete acromioclavicular dislocations treated with micro-movable and anatomical acromioclavicular plate. Open reduction and internal fixation was performed using the MAAP in 16 patients (10 males, 6 females; mean age 36 years; range 16 to 63 years) with acute complete acromioclavicular joint dislocation. Radiographic evaluations were routinely conducted every 3 weeks until 3 months postoperatively. The MAAP were removed under local anesthesia after 3 months postoperatively. We evaluated the functional results by using the constant scoring system and radiological results in the last follow-up time. The mean follow up was 26 months (range 16 to 38 months). The mean Constant score was 94 (range, 78 to 100). The results were excellent in 12 patients (75.0%), good in 3 patients (18.8%) and satisfactory in 1 patient (6.2%). Three patients with scores of 80 to 90 had mild pain during activity, but have not affected the shoulder range of motion. One patient has both some pain and limited range of motion of shoulder joint. All patients but one have returned to their preoperative work without any limitations. Compared to the contralateral side, radiography showed anatomical reposition in the vertical plane in 14 cases, slight loss of reduction in 2 older patients. We recommend the MAAP fixation for surgical treatment of acute complete acromioclavicular joint dislocation as it could provide satisfactory shoulder functions and clinical results, with lower complication rate. However, it is necessary to continue to observe the clinical effects of this fixation technique.

  16. Clinical Effect of Acute Complete Acromioclavicular Joint Dislocation Treated with Micro-Movable and Anatomical Acromioclavicular Plate

    Directory of Open Access Journals (Sweden)

    Qingjun Liu, Jianyun Miao, Bin Lin, Zhimin Guo

    2012-01-01

    Full Text Available Objectives: We evaluated the long-term clinical results of acute complete acromioclavicular dislocations treated with micro-movable and anatomical acromioclavicular plate.Methods: Open reduction and internal fixation was performed using the MAAP in 16 patients (10 males, 6 females; mean age 36 years; range16 to 63 years with acute complete acromioclavicular joint dislocation. Radiographic evaluations were routinely conducted every 3 weeks until 3 months postoperatively. The MAAP were removed under local anesthesia after 3 months postoperatively. We evaluated the functional results by using the constant scoring system and radiological results in the last follow-up time. The mean follow up was 26 months (range 16 to 38 months.Results: The mean Constant score was 94 (range, 78 to 100. The results were excellent in 12 patients (75.0%, good in 3 patients (18.8% and satisfactory in 1patient (6.2%. Three patients with scores of 80 to 90 had mild pain during activity, but have not affected the shoulder range of motion. One patient has both some pain and limited range of motion of shoulder joint. All patients but one have returned to their preoperative work without any limitations. Compared to the contralateral side, radiography showed anatomical reposition in the vertical plane in 14 cases, slight loss of reduction in 2 older patients.Conclusion: We recommend the MAAP fixation for surgical treatment of acute complete acromioclavicular joint dislocation as it could provide satisfactory shoulder functions and clinical results, with lower complication rate. However, it is necessary to continue to observe the clinical effects of this fixation technique.

  17. Comparative Evaluation of Drug Deposition in Hair Samples Collected from Different Anatomical Body Sites.

    Science.gov (United States)

    Tzatzarakis, Manolis N; Alegakis, Athanasios K; Kavvalakis, Matthaios P; Vakonaki, Elena; Stivaktakis, Polychronis D; Kanaki, Katerina; Vardavas, Alexander I; Barbounis, Emmanouil G; Tsatsakis, Aristidis M

    2017-04-01

    In this study, we focused on the validation of a method for the simultaneous detection and quantification of cannabinoids, cocaine and opiates in hair as well as on the distribution of the drugs deposition in hair collected from different anatomical body sites. The proposed analytical procedure was validated for various parameters such as selectivity, linearity, limit of quantification, precision, accuracy, matrix effect and recovery. Four hundred and eighty-one samples were collected during 2010-2015 from 231 drug abusers. A 6-h ultrasonic-assisted methanolic extraction was applied for the isolation of the drugs. The analysis was performed in an liquid chromatography-mass spectrometry system for the opiates and cocaine and in a gas chromatography-mass spectrometry system for the cannabinoids. Cocaine was the most frequent detected drug (68.8-80.5%) followed by cannabinoids (47.6-63.3%) and opiates (34.7-46.7%) depending on the body site that the samples were collected. The mean concentrations of Δ9-tetrahydrocannabinol (THC) were 0.63 ± 2.11 for head, 0.54 ± 1.03 for pubic, 0.34 ± 0.51 for axillary and 0.18 ± 0.18 ng/mg for chest hair samples. The values of cocaine were 6.52 ± 15.98, 4.64 ± 10.77, 6.96 ± 38.21 and 3.94 ± 6.35 ng/mg, while the values of 6-monoacetylmorphine (MAM) were 3.33 ± 5.89, 3.06 ± 9.33, 1.37 ± 1.37 and 16.4 ± 1.77 ng/mg for head, pubic, axillary and chest samples, respectively. Differences between the detected concentrations of cocaine and opiates between the hair samples of different anatomical sites, as well as the ratio of drug metabolites to the parent compounds were observed in some cases. Statistically significant differences in the mean detected levels were noticed for morphine and heroin between head and pubic hair and also for cocaine and benzoylecgonine, between head and axillary hair samples. Moreover, the ratio of MAM to morphine and THC to cannabinol seems to correlate statistically with the total opiate or

  18. Rotator cuff-sparing approaches for glenohumeral joint access: an anatomic feasibility study.

    Science.gov (United States)

    Amirthanayagam, Tressa D; Amis, Andrew A; Reilly, Peter; Emery, Roger J H

    2017-03-01

    The deltopectoral approach for total shoulder arthroplasty can result in subscapularis dysfunction. In addition, glenoid wear is more prevalent posteriorly, a region difficult to access with this approach. We propose a posterior approach for access in total shoulder arthroplasty that uses the internervous interval between the infraspinatus and teres minor. This study compares this internervous posterior approach with other rotator cuff-sparing techniques, namely, the subscapularis-splitting and rotator interval approaches. The 3 approaches were performed on 12 fresh frozen cadavers. The degree of circumferential access to the glenohumeral joint, the force exerted on the rotator cuff, the proximity of neurovascular structures, and the depth of the incisions were measured, and digital photographs of the approaches in different arm positions were analyzed. The posterior approach permits direct linear access to 60% of the humeral and 59% of the glenoid joint circumference compared with 39% and 42% for the subscapularis-splitting approach and 37% and 28% for the rotator interval approach. The mean force of retraction on the rotator cuff was 2.76 (standard deviation [SD], 1.10) N with the posterior approach, 2.72 (SD, 1.22) N with the rotator interval, and 4.75 (SD, 2.56) N with the subscapularis-splitting approach. From the digital photographs and depth measurements, the estimated volumetric access available for instrumentation during surgery was comparable for the 3 approaches. The internervous posterior approach provides greater access to the shoulder joint while minimizing damage to the rotator cuff. Copyright © 2017. Published by Elsevier Inc.

  19. Post-trial anatomical frame alignment procedure for comparison of 3D joint angle measurement from magnetic/inertial measurement units and camera-based systems.

    Science.gov (United States)

    Li, Qingguo; Zhang, Jun-Tian

    2014-11-01

    Magnetic and inertial measurement units (MIMUs) have been widely used as an alternative to traditional camera-based motion capture systems for 3D joint kinematics measurement. Since these sensors do not directly measure position, a pre-trial anatomical calibration, either with the assistance of a special protocol/apparatus or with another motion capture system is required to establish the transformation matrices between the local sensor frame and the anatomical frame (AF) of each body segment on which the sensors are attached. Because the axes of AFs are often used as the rotational axes in the joint angle calculation, any difference in the AF determination will cause discrepancies in the calculated joint angles. Therefore, a direct comparison of joint angles between MIMU systems and camera-based systems is less meaningful because the calculated joint angles contain a systemic error due to the differences in the AF determination. To solve this problem a new post-trial AF alignment procedure is proposed. By correcting the AF misalignments, the joint angle differences caused by the difference in AF determination are eliminated and the remaining discrepancies are mainly from the measurement accuracy of the systems themselves. Lower limb joint angles from 30 walking trials were used to validate the effectiveness of the proposed AF alignment procedure. This technique could serve as a new means for calibrating magnetic/inertial sensor-based motion capture systems and correcting for AF misalignment in scenarios where joint angles are compared directly.

  20. Joint reconstruction of white-matter pathways from longitudinal diffusion MRI data with anatomical priors.

    Science.gov (United States)

    Yendiki, Anastasia; Reuter, Martin; Wilkens, Paul; Rosas, H Diana; Fischl, Bruce

    2016-02-15

    We consider the problem of reconstructing white-matter pathways in a longitudinal study, where diffusion-weighted and T1-weighted MR images have been acquired at multiple time points for the same subject. We propose a method for joint reconstruction of a subject's pathways at all time points given the subject's entire set of longitudinal data. We apply a method for unbiased within-subject registration to generate a within-subject template from the T1-weighted images of the subject at all time points. We follow a global probabilistic tractography approach, where the unknown pathway is represented in the space of this within-subject template and propagated to the native space of the diffusion-weighted images at all time points to compute its posterior probability given the images. This ensures spatial correspondence of the reconstructed pathway among time points, which in turn allows longitudinal changes in diffusion measures to be estimated consistently along the pathway. We evaluate the reliability of the proposed method on data from healthy controls scanned twice within a month, where no changes in white-matter microstructure are expected between scans. We evaluate the sensitivity of the method on data from Huntington's disease patients scanned repeatedly over the course of several months, where changes are expected between scans. We show that reconstructing white-matter pathways jointly using the data from all time points leads to improved reliability and sensitivity, when compared to reconstructing the pathways at each time point independently.

  1. Re-cataloging Joint Astronomy Centre (JAC) Library Book Collection

    Science.gov (United States)

    Lucas, A.; Zhang, X.

    2007-10-01

    The Joint Astronomy Centre operates two telescopes: the James Clerk Maxwell Telescope and the United Kingdom Infrared Telescope. In the JAC's 25-year history, their library was maintained by a number of staff ranging from scientists to student assistants. This resulted in an inconsistent and incomplete catalog as well as a mixture of typed, hand written, and inaccurate call number labels. Further complicating the situation was a backlog of un-cataloged books. In the process of improving the library system, it became obvious that the entire book collection needed to be re-cataloged and re-labeled. Readerware proved to be an inexpensive and efficient tool for this project. The software allows for the scanning of barcodes or the manual input of ISBNs, LCCNs and UPCs. It then retrieves the cataloging records from a number of pre-selected websites. The merged information is then stored in a database that can be manipulated to perform tasks such as printing call number labels. Readerware is also ideal for copy cataloging and has become an indispensable tool in maintaining the JAC's collection of books.

  2. Arthroscopically Assisted Reconstruction of Acute Acromioclavicular Joint Dislocations: Anatomic AC Ligament Reconstruction With Protective Internal Bracing—The “AC-RecoBridge” Technique

    Science.gov (United States)

    Izadpanah, Kaywan; Jaeger, Martin; Ogon, Peter; Südkamp, Norbert P.; Maier, Dirk

    2015-01-01

    An arthroscopically assisted technique for the treatment of acute acromioclavicular joint dislocations is presented. This pathology-based procedure aims to achieve anatomic healing of both the acromioclavicular ligament complex (ACLC) and the coracoclavicular ligaments. First, the acromioclavicular joint is reduced anatomically under macroscopic and radiologic control and temporarily transfixed with a K-wire. A single-channel technique using 2 suture tapes provides secure coracoclavicular stabilization. The key step of the procedure consists of the anatomic repair of the ACLC (“AC-Reco”). Basically, we have observed 4 patterns of injury: clavicular-sided, acromial-sided, oblique, and midportion tears. Direct and/or transosseous ACLC repair is performed accordingly. Then, an X-configured acromioclavicular suture tape cerclage (“AC-Bridge”) is applied under arthroscopic assistance to limit horizontal clavicular translation to a physiological extent. The AC-Bridge follows the principle of internal bracing and protects healing of the ACLC repair. The AC-Bridge is tightened on top of the repair, creating an additional suture-bridge effect and promoting anatomic ACLC healing. We refer to this combined technique of anatomic ACLC repair and protective internal bracing as the “AC-RecoBridge.” A detailed stepwise description of the surgical technique, including indications, technical pearls and pitfalls, and potential complications, is given. PMID:26052493

  3. Anatomical studies of timber and EPMA analysis of brass artefacts collected from steam engine shipwreck of Minicoy Island, Lakshadweep, India

    Digital Repository Service at National Institute of Oceanography (India)

    Tripati, S.; Shukla, S.R.; Som, V.; Sundaresh; Khedekar, V.; Shashikala, S.; Sharma, S.K.

    CURRENT SCIENCE, VOL. 104, NO. 10, 25 MAY 2013 1282 Anatomical studies of timber and EPMA analysis of brass artefacts collected from steam engine shipwreck of Minicoy Island, Lakshadweep, India The maritime activity of India is datable... on 17 November 1862. The weather was stormy and cloudy on the early Figure 1. Location of shipwrecks off Minicoy Island and other Islands of Lakshadweep. SCIENTIFIC CORRESPONDENCE CURRENT SCIENCE, VOL. 104, NO. 10, 25 MAY 2013 1283 morning...

  4. Anatomic variation of the deep venous system and its relationship with deep vein thrombosis found on the lower extremity venograms that were obtained after artificial joint replacements

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Min Sun; Lee, Jee Eun; Hwang, Ji Young; Shim, Sung Shine; Yoo, Jeong Hyun; Suh, Jeong Soo; Park, Jae Young [College of Medicine, Ewha Womans University, Seoul (Korea, Republic of)

    2006-11-15

    We wanted to evaluate the anatomic variations, the number of valves and the presence of deep vein thrombosis (DVT) on the lower extremity venograms obtained after artificial joint replacements, and we also wanted to determine the correlation of the incidence of DVT with the above-mentioned factors and the operation sites. From January to June 2004, conventional ascending contrast venographies of the lower extremities were performed in 119 patients at 7-10 days after artificial joint replacement, and all the patients were asymptomatic. Total knee replacement was done for 152 cases and total hip replacement was done for 34 cases. On all the venographic images of 186 limbs, the anatomic variations were classified and the presence of DVT was evaluated; the number of valves in the superficial femoral vein (SFV) and calf veins was counted. The sites of DVT were classified as calf, thigh and pelvis. Statistically, chi square tests and Fischer's exact tests were performed to determine the correlation of the incidence of DVT with the anatomic variations, the numbers of valves and the operation sites. Theoretically, there are 9 types of anatomical variation in the deep vein system of the lower extremity that can be classified, but only 7 types were observed in this study. The most frequent type was the normal single SFV type and this was noted in 117 cases (63%), and the others were all variations (69 cases, 37%). There was a 22.2% incidence of DVT (69 cases) in the normal single SFV type and 26.4% (17 cases) in the other variations. No significant difference was noted in the incidences of DVT between the two groups. In addition, no significant statistical differences were noted for the incidences of DVT between the single or variant multiple veins in the SFV and the popliteal vein (PV) respectively, between the different groups with small or large numbers of valves in the thigh and calf, respectively, and also between the different operation sites of the hip or knee

  5. 77 FR 74279 - Agency Information Collection (VA/DOD Joint Disability Evaluation Board Claim): Activity under...

    Science.gov (United States)

    2012-12-13

    ... AFFAIRS Agency Information Collection (VA/DOD Joint Disability Evaluation Board Claim): Activity under OMB....'' SUPPLEMENTARY INFORMATION: Title: VA/DOD Joint Disability Evaluation Board Claim, VA Form 21- 0819. OMB Control... collection of information abstracted below to the Office of Management and Budget (OMB) for review...

  6. [Divine cadavers: gender, medical discourse, and anatomical collections in the legend of Pedro González de Velasco].

    Science.gov (United States)

    del Pozo, Alba

    2016-01-01

    This paper examines the relationship between the public image of Pedro Gonzólez de Velasco (1815-1882), famous for his anatomical collections and his Anthropological Museum, founded in 1875 in Madrid, and the popular legend related to the death, embalming and exhumation of his daughter Concepción. The doctor who is committed to the nation becomes a mad scientist, and his official biography is transformed into an urban legend. Beyond the merely anecdotal, I show how the aesthetics associated with female corpses and artificial women organize cultural imaginaries, bringing together medical discourses and literary and artistic representations.

  7. MRI of cystic collection of the three joint; Les collections kystiques du genou en IRM

    Energy Technology Data Exchange (ETDEWEB)

    Boutry, N.; Cotten, A.; Dewatre, F.; Chastanet, P.; Gougeon, F. [Hopital R. Salengro, C.H.U., 59 - Lille (France)

    1997-09-01

    We present the main MR features of cystic lesions around the knee joint. Popliteal cysts are the most frequently seen. The usually result from extrusion of joint fluid into the gastrocnemio-semimembranosus bursa but they can have an atypical location or extension. They are most often due to a meniscal, ligamentous, degenerative or inflammatory joint disease responsible for a chronic joint effusion. Meniscal cysts are always associated with a horizontal tear. Medial meniscal cysts are larger and can extend far from the joint. Bursitis occur as a result of inflammation or infection of a bursa. Their location is stereotyped and they do not communicate with the knee joint. Ganglion cysts or ganglia are benign cystic lesions which can affect peri-articular tissues as well as subchondral bone or cruciate ligaments. MRI is now a simple and noninvasive way of obtaining etiologic diagnosis and guiding therapy. (authors). 46 refs.

  8. 77 FR 60746 - Proposed Information Collection (VA/DOD Joint Disability Evaluation Board Claim) Activity...

    Science.gov (United States)

    2012-10-04

    ... AFFAIRS Proposed Information Collection (VA/DOD Joint Disability Evaluation Board Claim) Activity: Comment... opportunity for public comment on the proposed collection of certain information by the agency. Under the... Register concerning each proposed collection of information, including each proposed extension of...

  9. MR imaging of the intraarticular disk of the acromioclavicular joint: a comparison with anatomical, histological and in-vivo findings

    Energy Technology Data Exchange (ETDEWEB)

    Heers, Guido; Goetz, Juergen; Schubert, Thomas; Schachner, Henrik; Neumaier, Ulrich; Grifka, Joachim; Hedtmann, Achim [Orthopaedische Universitaetsklinik Regensburg, Asklepios Klinikum Bad Abbach, Bad Abbach (Germany)

    2007-01-15

    To characterize MRI features of the intraarticular disk of the acromioclavicular joint. We studied the appearance of 11 acromioclavicular joints of six cadavers (subjects aged 57-89 years at the time of death) and six healthy shoulders on T1-weighted, T2 (TSE)-weighted, STIR and PD (fat saturated) magnetic resonance imaging (MRI) and compared the findings with observations during dissection and histological examination. Macroscopic examinations showed two wedge-shaped disks underneath the superior and above the inferior joint capsule in nine specimens. In two specimens the acromioclavicular joints were degenerated. Histologically, the disk tissue consisted of fibrocartilage whereas the joint cartilage was partly degenerated, containing zones of fibrocartilage amidst degenerated hyaline cartilage, which may explain the similar signal intensity of both structures in all sequences used. MR appearance of the intraarticular structures of the acromioclavicular joint was similar in cadaveric and healthy shoulders. The difficulties related to imaging the acromioclavicular joint may be explained by the anatomy. Similar signal intensity of cartilage and disk may be explained by their similar histological structure (fibrocartilage). MRI findings should be interpreted with respect to the variable anatomy. These results may serve as a basis for further radiological studies of the acromioclavicular joint. (orig.)

  10. Anatomic relationships of the distal and proximal radioulnar joints articulating surface areas, and of the radius and ulna bone volumes – implications for biomechanical studies of the distal and proximal radioulnar joints and forearm bones

    Directory of Open Access Journals (Sweden)

    Paul S C Malone

    2016-07-01

    Full Text Available BackgroundPrevious work from this laboratory has evidenced the biomechanical role of forearm osseoligamentous structures in load transfer of applied forces. It has shown that transmitted forces across the distal radioulnar joint (DRUJ and proximal radioulnar joint (PRUJ are similar though not identical under axial loading conditions. The purpose of the study was to assess the articulating surface areas of the radioulnar joints and the volumes of the forearm bones addressing the hypothesis that there may be anatomic adaptations that reflect the biomechanical function of the integrated forearm unit.MethodsThe articulating surface areas of PRUJ and DRUJ were assessed using a laser scanner in 24 cadaver forearms. The articulating joint surfaces were additionally delineated from standardized photographs assessed by three observers. The surface areas of matched pairs of joints were compared on the null hypothesis that these were the same within a given forearm specimen. An additional 44 pairs of matched forearm bone volumes were measured using water displacement technique and again compared through statistical analysis (paired sample t-test, and Bland Altman analysis.ResultsThe findings of this study are that the articulating surface areas of the DRUJ and PRUJ as well as the bone volumes are significantly different and yet strongly correlated. The paired sample t-test showed a significant difference between the surface areas of the DRUJ and PRUJ (p<0.05. The PRUJ articulating surface area was marginally larger than the DRUJ with a PRUJ : DRUJ ratio of 1.02. Paired sample t-test showed a significant difference between the two bone volumes (p<0.01 with a radius to ulna bone volume ratio of 0.81. When the olecranon was disregarded, radius volume was on average 4% greater than ulna volume.ConclusionsThis study demonstrated defines the anatomical relationships between the two forearm bones and their articulating joints when matched for specimen. The data

  11. Anatomical study of the ligamentous attachments and articular surfaces of the trapeziometacarpal joint. Consequences on surgical management of its osteoarthrosis.

    Science.gov (United States)

    Maes-Clavier, C; Bellemère, P; Gabrion, A; David, E; Rotari, V; Havet, E

    2014-04-01

    In the goal to optimize conservative surgical techniques of the trapeziometacarpal joint in cases of moderate osteoarthritis, we have defined the relationships between the ligamentous attachments and the articular surfaces onto the trapezium and the first metacarpal bone on the one hand, and the dorsovolar and the transverse diameters of the articular surfaces on the other hand. Thirty-six trapeziometacarpal joints (from 18 fresh cadavers) were studied. They were separated into two groups depending on the macroscopic assessment of chondral disease. Group A included stages I to III (no osteoarthritis or moderate osteoarthritis), group B included stages IV (major cartilage destruction). The dorsovolar and transverse sizes of the articular surfaces were measured. Dorsoradial ligament (DRL), posterior oblique ligament (POL), intermetacarpal ligament (IML), ulnar collateral ligament (UCL) and anterior oblique ligament (AOL) were dissected and the distance between their attachments and the articular surfaces were measured. Group A included 17 joints (71% males) and group B included 19 joints (95% females). For the first metacarpal bone, the average ratio between the dorsovolar diameter and the transverse diameter of metacarpal articular surfaces was significantly higher in group B and the average distance between the ligamentous attachments and the articular surface was more than two millimeters, except for the DRL in group B. For the trapezium, only the posterior ligaments (DRL and POL) of group A were inserted at a mean distance more than two millimeters from the articular surfaces. Dorsovolar length of the metacarpal articular surface was higher for osteoarthritis cases. This difference can be explained by the existence of a palmar osteophyte that was always found in stage IV. Describing a map of the ligamentous attachment distance from the articular surface could help surgeons to avoid the ligamentous injury during minimal osteochondral resection.

  12. Anatomical variations of the anterior atlanto-dental joint and relations to the apical and alar ligaments in a geriatric population.

    Science.gov (United States)

    Rustagi, Tarush; Iwanaga, Joe; Sardi, Juan P; Alonso, Fernando; Oskouian, Rod J; Tubbs, R Shane

    2017-08-17

    Degenerative changes in the upper cervical spine may be age related degeneration or a pathological process such as rheumatoid arthritis. However, to our knowledge, the relationship between the apical and alar ligaments and these anomalies has not been discussed. We present anatomical variations of the anterior atlanto-dental joint observed during cadaveric dissection of adult craniovertebral junctions, the relationship with the alar and apical ligaments and discuss possible origins and clinical implications. The upper cervical spine including part of the occiput was dissected from cadavers whose mean age at death was 78.9 years-old. The anterior atlanto-dental joint and apical and alar ligaments were observed and any atypical findings were noted. In eleven specimens, seven had a dens corona, three had an os odontoideum and one had a dens aureola, which arose from the upper part of the anterior arch of the atlas. Only four specimens had an apical ligament. The possible etiologies and the clinical applications of these craniovertebral anomalies in a geriatric population should be appreciated by the clinician treating patients with disease in this area or interpreting imaging in the region. Copyright © 2017 Elsevier Inc. All rights reserved.

  13. A cadaveric study showing the anatomical variations in the branches of the dorsalis pedis artery at the level of the ankle joint and its clinical implication in ankle arthroscopy.

    Science.gov (United States)

    Parikh, S; Dawe, E; Lee, C; Whitehead-Clarke, T; Smith, C; Bendall, S

    2017-04-01

    Introduction Pseudoaneurysm formation following ankle arthroscopy is a rare but potentially catastrophic complication. The placement of anterior ankle portals carries inherent risk to the superficial and deep peroneal nerves, as well as to the dorsalis pedis artery. Anatomical variations in the dorsalis pedis and the presence of branches at the joint line may increase the risk of vascular injury and pseudoaneurysm formation during arthroscopy. There is limited anatomical evidence available regarding the branches of the dorsalis pedis artery, which occur at the point at which they cross the ankle joint. Objectives The objective of the study was to describe the frequency and direction of branches of the dorsalis pedis crossing the ankle joint. Materials and Methods Nineteen cadaveric feet were carefully dissected to explore the course of the dorsalis pedis artery, noting in particular the branching pattern at the joint line. Results Eleven of the nineteen feet had a branch of the dorsalis pedis artery that crossed the level of the ankle joint. Out of these, six were lateral, four medial and one bilateral. Eight of the eleven specimens had one branch at, or just before, the level of the joint. Two specimens had two branches and one had three branches crossing the ankle, which were all in the same direction, crossing laterally to the main trunk of the dorsalis pedis. Conclusions Our study demonstrated high rates of branching of the dorsalis pedis artery at the level of the ankle joint. The role of these branches in pseudoaneurysm formation during anterior hindfoot surgery remains unclear.

  14. Analyzing mHealth Engagement: Joint Models for Intensively Collected User Engagement Data.

    Science.gov (United States)

    Scherer, Emily A; Ben-Zeev, Dror; Li, Zhigang; Kane, John M

    2017-01-12

    Evaluating engagement with an intervention is a key component of understanding its efficacy. With an increasing interest in developing behavioral interventions in the mobile health (mHealth) space, appropriate methods for evaluating engagement in this context are necessary. Data collected to evaluate mHealth interventions are often collected much more frequently than those for clinic-based interventions. Additionally, missing data on engagement is closely linked to level of engagement resulting in the potential for informative missingness. Thus, models that can accommodate intensively collected data and can account for informative missingness are required for unbiased inference when analyzing engagement with an mHealth intervention. The objectives of this paper are to discuss the utility of the joint modeling approach in the analysis of longitudinal engagement data in mHealth research and to illustrate the application of this approach using data from an mHealth intervention designed to support illness management among people with schizophrenia. Engagement data from an evaluation of an mHealth intervention designed to support illness management among people with schizophrenia is analyzed. A joint model is applied to the longitudinal engagement outcome and time-to-dropout to allow unbiased inference on the engagement outcome. Results are compared to a naïve model that does not account for the relationship between dropout and engagement. The joint model shows a strong relationship between engagement and reduced risk of dropout. Using the mHealth app 1 day more per week was associated with a 23% decreased risk of dropout (PmHealth data may produce biased results. Joint models provide a way to model intensively collected engagement outcomes while simultaneously accounting for the relationship between engagement and missing data in mHealth intervention research.

  15. 骶髂关节解剖特点与X线表现的分析%Analysis of Anatomical Feature and the X-ray Manifestations of the Sacroiliac Joint

    Institute of Scientific and Technical Information of China (English)

    黄永火; 孙向前; 欧阳祖彬; 戚警吾; 周庭勇

    2001-01-01

    Purpose To investigate the relationship of anatomical feature and the X-ray manifestations of the sacroili ac joint. Methods The sacroiliac joints of 12 corpses were minute dissected, and the X-ray manifestations of the sacro iliac joint of 24 corpse and 200 living body were measured or analyzed. Results The results of the autopsy showed that cartilaginous thickness, size and joint interval's width or shape of every body sacroiliac joint were not alike. Conclusion After comparison of anatomical feature and the X-ray manifestations of the sacroiliac joint is improved.%目的探讨骶髂关节解剖特点与X线表现的相关性。方法对12具尸体的骶髂关节进行了详细解剖和观察,并对尸体24个和活体200个骶髂关节的X线表现进行了测量和分析。结果尸解结果表明每个人骶髂关节软骨的厚薄、大小和关节间隙的宽度或形状都不一样。结论通过骶髂关节解剖特点与X线表现的对照。进一步提高了诊断骶髂关节病变的正确率。

  16. Anatomical significance of a posterior horn of medial meniscus: the relationship between its radial tear and cartilage degradation of joint surface

    Directory of Open Access Journals (Sweden)

    Kan Akinori

    2010-01-01

    Full Text Available Abstract Background Traumatic injury and surgical meniscectomy of a medial meniscus are known to cause subsequent knee osteoarthritis. However, the difference in the prevalence of osteoarthritis caused by the individual type of the medial meniscal tear has not been elucidated. The aim of this study was to investigate what type of tear is predominantly responsible for the degradation of articular cartilage in the medial compartment of knee joints. Methods Five hundred and forty eight cadaveric knees (290 male and 258 female were registered in this study. The average age of cadavers at death was 78.8 years old (range: 52-103 years. The knees were macroscopically examined and their medial menisci were classified into four groups according to types of tears: "no tear", "radial tear of posterior horn", "other types of tear" and "worn-out meniscus" groups. The severity of cartilage degradation in their medial compartment of knee joints was evaluated using the international cartilage repair society (ICRS grading system. We statistically compared the ICRS grades among the groups using Mann-Whitney U test. Results The knees were assigned into the four groups: 416 "no tear" knees, 51 "radial tear of posterior horn" knees, 71 "other types of tear" knees, and 10 "worn-out meniscus" knees. The knees with substantial meniscal tears showed the severer ICRS grades of cartilage degradation than those without meniscal tears. In addition, the ICRS grades were significantly severer in the "radial tear of posterior horn" group than in the "other types of tear" group, suggesting that the radial tear of posterior horn in the medial meniscus is one of the risk factors for cartilage degradation of joint surface. Conclusions We have clarified the relationship between the radial tear of posterior horn in the medial meniscus and the severer grade of cartilage degradation. This study indicates that the efforts should be made to restore the anatomical role of the posterior

  17. Images From a Jointly-Arousing Collective Ritual Reveal Affective Polarization

    Directory of Open Access Journals (Sweden)

    Joseph A. Bulbulia

    2013-12-01

    Full Text Available Collective rituals are biologically ancient and culturally pervasive, yet few studies have quantified effects on participants. We assessed two plausible models from qualitative anthropology: ritual empathy predicts affective convergence among all ritual participants irrespective of ritual role; rite-of-passage predicts emotional differences, specifically that ritual initiates will express relatively negatively valence when compared with non-initiates. To evaluate model predictions, images of participants in a Spanish fire-walking ritual were extracted from video data and assessed by nine Spanish raters for arousal and valence. Consistent with rite-of-passage, we found that arousal jointly increased for all participants but that valence differed by ritual role: fire-walkers exhibited increasingly positive arousal and increasingly negative valence when compared with passengers. This result offers the first quantified evidence for rite of passage dynamics within a highly arousing collective ritual. Methodologically, we show that surprisingly simple and non-invasive data structures (rated video images may be combined with methods from evolutionary ecology (Bayesian Generalized Linear Mixed Effects models to clarify poorly understood dimensions of the human condition.

  18. Images from a jointly-arousing collective ritual reveal affective polarization.

    Science.gov (United States)

    Bulbulia, Joseph A; Xygalatas, Dimitris; Schjoedt, Uffe; Fondevila, Sabela; Sibley, Chris G; Konvalinka, Ivana

    2013-01-01

    Collective rituals are biologically ancient and culturally pervasive, yet few studies have quantified their effects on participants. We assessed two plausible models from qualitative anthropology: ritual empathy predicts affective convergence among all ritual participants irrespective of ritual role; rite-of-passage predicts emotional differences, specifically that ritual initiates will express relatively negative valence when compared with non-initiates. To evaluate model predictions, images of participants in a Spanish fire-walking ritual were extracted from video footage and assessed by nine Spanish raters for arousal and valence. Consistent with rite-of-passage predictions, we found that arousal jointly increased for all participants but that valence differed by ritual role: fire-walkers exhibited increasingly positive arousal and increasingly negative valence when compared with passengers. This result offers the first quantified evidence for rite of passage dynamics within a highly arousing collective ritual. Methodologically, we show that surprisingly simple and non-invasive data structures (rated video images) may be combined with methods from evolutionary ecology (Bayesian Generalized Linear Mixed Effects models) to clarify poorly understood dimensions of the human condition.

  19. MRI analysis of anatomic structures related to the patellofemoral joint instability%髌股关节不稳相关解剖结构的MRI分析

    Institute of Scientific and Technical Information of China (English)

    何容涵; 李智勇; 史德海; 王昆

    2015-01-01

    Objective To assess the principle anatomic factors contributing to the incidence of patellofemoral joint instability. Methods Knee MRI evaluations of 20 patients who had the clinical diagnosis of patellofemoral joint instability in the Third Affiliated Hospital of Sun Yat-sen University from September 2010 to September 2012 were selected as patellar instability group [ 8 males, 12 females, the average age was ( 24 ± 8 ) years ] , including the patellar dislocation and injury of medial patellar retinaculum. The criteria for exclusion were any history of a multiple-ligament injury to the knee joint, an accompanying knee fracture, massive hydrarthrosis or a history of knee surgery. The MRI images of 69 asymptomatic subjects were selected as the asymptomatic group[31 males, 38 females, the average age was (25 ± 5) years]. None of these subjects had symptoms or objective pathologic findings related to the patellofemoral, fractures and ligament injury of knee. Patellar height, sulcus angle, sulcus lateral facet ratio, and the tibial tubercle trochlear groove ( TT-TG ) distance were measured in both groups. Independent-samples t test and logistic regression were used for statistic analysis. Results The mean values of patellar height, sulcus lateral facet ratio, sulcus angle, and TT-TG in asymptomatic group were 1. 02 ± 0. 15, 0. 63 ± 0. 13 , 145° ± 8°, (1. 15 ± 0. 24) cm, respectively;and the mean values of patellar height, sulcus lateral facet ratio, sulcus angle, and TT-TG in patellar instability group were 1. 16 ± 0. 14, 0. 44 ± 0. 13, 152° ± 8°, ( 1. 69 ± 0. 27 ) cm, respectively. Significant differences were observed between asymptomatic group and patellar instability group for all variables ( t=3. 728, t=5. 755, t=3. 446, t=8. 614, all P values<0. 01). Significant correlations between patellar instability and anatomic factors (TT-TG, sulcus lateral facet ratio, and sulcus angle) were observed by logistic regression (all P values<0. 05). Sulcus lateral

  20. Periarticular osteophytes as an appendicular joint stress marker (JSM: analysis in a contemporary Japanese skeletal collection.

    Directory of Open Access Journals (Sweden)

    Toshiyuki Tsurumoto

    Full Text Available OBJECTIVE: The aim of this study was to investigate the possibility that periarticular osteophytes plays a role as a appendicular joint stress marker (JSM which reflects the biomechanical stresses on individuals and populations. METHODS: A total of 366 contemporary Japanese skeletons (231 males, 135 females were examined closely to evaluate the periarticular osteophytes of six major joints, the shoulder, elbow, wrist, hip, knee, and ankle and osteophyte scores (OS were determined using an original grading system. These scores were aggregated and analyzed statistically from some viewpoints. RESULTS: All of the OS for the respective joints were correlated logarithmically with the age-at-death of the individuals. For 70 individuals, in whom both sides of all six joints were evaluated without missing values, the age-standardized OS were calculated. A right side dominancy was recognized in the joints of the upper extremities, shoulder and wrist joints, and the bilateral correlations were large in the three joints on the lower extremity. For the shoulder joint and the hip joint, it was inferred by some distinctions that systemic factors were relatively large. All of these six joints could be assorted by the extent of systemic and local factors on osteophytes formation. Moreover, when the age-standardized OS of all the joints was summed up, some individuals had significantly high total scores, and others had significantly low total scores; namely, all of the individuals varied greatly in their systemic predisposition for osteophytes formation. CONCLUSIONS: This study demonstrated the significance of periarticular osteophytes; the evaluating system for OS could be used to detect differences among joints and individuals. Periarticular osteophytes could be applied as an appendicular joint stress marker (JSM; by applying OS evaluating system for skeletal populations, intra-skeletal and inter-skeletal variations in biomechanical stresses throughout the

  1. Modeling of Human Joint Structures.

    Science.gov (United States)

    1982-09-01

    Radial Lateral " epicondyle Olecranon Radius Ulna Figure 3. Lateral aspect of the right elbow joint. -17- Annular Ligament This strong band encircles... elbow joint, knee joint, human joints, shoulder joint, ankle joint, joint models, hip joint, ligaments. 20. ABSTRACT (Continue on reverse side If...ligaments. -A rather extended discussion of the articulations and anatomical descriptions of the elbow , shoulder, hip, knee and ankle joints are

  2. 膝关节有限元解剖模型的构建及其力学分析%The construction of the anatomical finite element model of knee joint and its mechanical anal-ysis

    Institute of Scientific and Technical Information of China (English)

    董跃福; 牟志芳; 蒋胜波; 刘建; 刘旭东

    2015-01-01

    Objective To develop an anatomically accurate finite element model of knee joint through the method of multimodality CT and MRI image data fusion and to further analyze and verify it for offering a useful tool for the study of knee biomechanics. Methods CT and MRI image data of an intact knee joint were imported into Mimics soft-ware. 3D models of bones,articular cartilages and ligaments were respectively constructed from image data. Following the fusion of the constructed 3D models based on external landmarks, the complete knee model was constructed. Then the knee finite element model was developed in Hypermesh software. Based on anatomical observation and manual measurement, the finite element model was assessed in its fidelity level. Finally the finite element model was analyzed and verified after the definition of its material behavior, boundary conditions and loading. Results The complete knee finite element mode composed of bone,meniscus, articular cartilage,and ligament was developed from CT and MRI images, and it maintained its important anatomical features of knee joint. The obtained finite element analysis results corresponded to that reported in the literature, which meaned the model′s reliability. Conclusions Through the method of multimodality CT and MRI image data fusion, the anatomically accurate finite element model of knee joint can be developed, and it maintains its important anatomical features. This model is a useful tool for the study of knee biomechanics.%目的 通过多模态CT和MRI影像数据融合构建膝关节有限元解剖模型,并进行有限元分析和验证,为膝关节力学仿真研究提供可靠的有限元模型. 方法 采集正常膝关节CT和MRI影像数据,导入到 Mimics软件中,构建膝关节骨骼、半月板、关节软骨、韧带等结构的三维模型. 以外部标记为参照点进行模型配准,融合成膝关节整体模型. 在Hypermesh软件中进行网格划分,构建膝关节有限元模型. 通

  3. 骶髂关节解剖型钢板的全骨盆三维有限元模拟%3D FE simulation of anatomic plates for sacroliliac joints on whole pevis model

    Institute of Scientific and Technical Information of China (English)

    郑琦; 廖胜辉; 石仕元; 费骏; 魏威; 汪翼凡

    2008-01-01

    目的在高度仿真的完整骨盆三维有限元模型基础上,模拟使用新设计的解剖型钢板对骶髂关节骨折脱位进行固定,并与普通钢板的模拟固定进行对比,验证和分析新型钢板的性能.方法从CT精确重建髋骨和骶骨模型,采用专门的半自动流线型生物力学有限元网格划分器生成规则的体网格模型,并进一步建立骶髂关节的终板、软骨、关节接触面,和骨盆上的主要韧带组织及耻骨间盘.然后去掉一侧的骶髂关节韧带群模拟骨折脱位,使用新型的骶髂关节解剖型棒-板内固定系统进行固定模拟,同时使用普通钢板替代解剖型钢板建立对比模型,分别进行加载分析受力情况.结果通过使用新的解剖型钢板改进棒一板内固定系统,骶髂关节的最大相对位移值减小了约23%,骨盆主要传承负载区域的最大的应力值降低了约25%.结论新型的解剖型钢板有效地提高了骶髂关节棒-板内固定系统的力学性能,为骨盆骨折的治疗增加了一种更有效的新方法.%Objective Based on a geometrical and mechanical accurate 3D FE model of whole pelvis,this paper evaluatesthe biomechanical properties of a new sacroliliac bar-plate internal fixation system with anatomic plate,compared to normal rect plate.Methods Using accurate solid models of the sacral and hip bones from CT data,an ad hoc biomechanieal semi-automatic mesh generator was employed to generate regular FE mesh of the pevis model.Sacroiliac joint related end plates,cartilages,and contact surfaces,as well as several important ligaments and the interpubic disc were reeonstucted to consummate the whole model.One side of sacroiliac joint rellated ligaments was deleted to simulate the case of sacroiliac joint fracture.Then the new sacroliliac bar-plate internal fixation system with anatomic plate was integrated to fix the fracture,and acontrol model using normal rect plate was also generated.All models were

  4. Study on the relationship between X-ray imaging characteristics and anatomical measurements of temporomandibular joint%颞颌关节X线影像特征及其解剖学测量结果相关性分析

    Institute of Scientific and Technical Information of China (English)

    曹鸿涛; 王美青; 王艳清; 刘芙蓉

    2001-01-01

    Objective:To investigate the correlation between X-ray imaging characteristics and anatomical measurements of temporomandibular joint(TMJ).Methods:36 TMJs of 18 skulls with stable occlusion were examed by X-ray on lateral middle,medial third and coronal section respectively. Dimensions of lateral-medial and anterior-posterior diameters in every section of TMJ on the X-ray photoes were measured by electronic ruler. The length of anterior,superior and posterior space of the TMJs on the skulls was measured and recorded by impression materials. The thinkness representing the TMJ space on sagital sections of lateral, middle and medial thirds in anterior, central and posterior dimensions was measured respectively.The correlation between the values measured on X-ray photoes and those obtained from anatomical measurement was analized .Results:Significant correlation (P0.05)。结论:颞颌关节后前位和中1/3正矢状位X线片有实际诊断意义。

  5. Collaboration between students and teachers to accumulate a collection of anatomical preparations of high quality in order to loan them to students

    Directory of Open Access Journals (Sweden)

    Friker, Jutta

    2005-04-01

    Full Text Available In 2002 the Veterinary Medicine Faculty of Munich University (Ludwig-Maximilians-Universität a project was started to involve students to build up a collection of anatomical preparations. The goal of this plan was to obtain long term preserved preparations for storage in boxes of plastic in order to loan them to students. The question to solve was whether it is possible and efficient to engage students. The cadavers were provided from the section hall. We used only material from animals without clinical symptoms. The students were provided with a list of themes to choose from, or they could submit a proposal. Before starting the preparation, as a first step, the basic material was conserved in a special non-toxic solution, developed at the institute of anatomy. Students could perform the preparations during the semester as well as in semester holidays. Scientific assistants helped the students throughout the project. The period specified to assemble the preparations was one semester plus semester holiday. Over the last two years we have received preparations of different quality. About one third of the preparations were of high quality and suitable for long term preservation. Approximately thirty percent of the students required two semesters to finish their preparations. The remaining preparations had to be rejected because students did not complete their project or the preparations were unsuitable for use. Students are very fascinated with this project. Every semester we accept only half of the applicants due to the overwhelming student interest. In summary, it is shown that the collaboration between the students and teachers can help to expand the learning and teaching tools. Students and teachers benefit from this teamwork. Although some preparations have to be eliminated, the students are able to apply their knowledge while gaining experience with the scalpel and tweeters.

  6. Dolor de la articulación sacroilíaca: Anatomía, Diagnóstico y Tratamiento Sacroiliac joint pain: Anatomy, Diagnosis and Treatment

    Directory of Open Access Journals (Sweden)

    G. E. Mejía

    2008-04-01

    Full Text Available El dolor de la articulación sacroilíaca es una causa frecuente de dolor bajo de espalda, sin embargo el diagnóstico de artralgia sacroilíaca no es fácil de confirmar y la exploración física de la articulación es controvertido. Además este diagnóstico a menudo pasa inadvertido para el médico, por lo que la falta de consideración de esta posible causa de lumbalgia da lugar a tratamientos inapropiados e inadecuados. La articulaciones sacroilíacas, sinoviales del tipo anfiartrosico irregular, monoaxiales, en la cual se articulan las carillas articulares del sacro al ilion, Su innervación es cuestión de debate, pero las más recientes investigaciones refieren que deriva de L2-S2, L4-S2, L5-S2. La prevalencia del dolor de la articulación sacroilíaca no esta bien estudiado, hay numerosas etiologías para el dolor de articulación sacroilíaca, estas causas se pueden dividir en intraarticulares y extraarticulares. Para la exploración física se cuenta con una serie de 12 pruebas las cuales fueron emitidas por un comité de expertos y se concluye que encontrar 3 o más pruebas positivas es muy sugestivo de dolor de dicha. El tratamiento se puede dividir en conservador, intervencionista donde se puede utilizar desde la infiltración con anestésico local y esteroide hasta radiofrecuencia y por ultimo quirúrgico para casos seleccionados.The pain of the sacroiliac joint is a frequent cause of low back pain, however the diagnose of sacroiliac artralgia it is not easy to confirm and the physical exploration of the joint is controversial. Also this I often diagnose it happens inadvertent for the physician, for what the lack of consideration of this possible low back pain cause gives place to inappropriate and inadequate treatments. The sacroiliac joint is synovial of the type irregular anphiarthrosic, monoaxial, in which the sides joint are articulated from the sacrum one to the Ilion, Their innervation is debate question, but those but

  7. 膝关节周围动脉为蒂骨膜(骨)瓣的应用解剖及临床意义%Anatomical study and clinical application of the periosteal (bone ) flaps pedicled with arteries around knee joint

    Institute of Scientific and Technical Information of China (English)

    祝少博; 陈振光; 谭金海; 方成; 张发惠; 郑和平

    2001-01-01

    Objective To provide anatomical basis for repairing nonunion and defect around knee joint. Methods The origin, course, branches, distribution and anastomosis of the vessel netwo rk around knee joint were observed and measured in 30 adult cadaver lower limb specimens infused with red dye via artery. Results There were abundant vessel network around knee joint, which was composed of the end b ranches and communicating branches of femoral artery, popliteal artery, anterior tibial artery, posterior tibial artery, etc. Conclusion  The periosteal (bone) flaps pedicled with arteries around knee is one of the mos t important donors.%目的 为带蒂骨膜(骨)瓣移位治疗膝关节周围骨不连、骨缺损提供解剖学依据。方法 在30侧经动脉灌注的成人下肢标本上,观察并测量膝关节周围动脉网有关血管的起始、走行、口径、分布及其吻合情况。结果 膝关节周围存在着丰富的血供,其主要由月 国动脉、股动脉、胫前动脉、胫后动脉的终末支及相互间的交通支和吻合网恒定构成。结论 以膝关节周围动脉为蒂的骨膜(骨)瓣,是进行局部转位和吻合血管游离移植的重要供区之一。

  8. Anatomic and clinical significance of the anterolateral hip joint capsule and iliofemoral ligament%髋前外侧关节囊与髂股韧带的应用解剖及临床意义

    Institute of Scientific and Technical Information of China (English)

    林佳杰; 唐毓金; 黄秀峰; 谢克恭; 黄可; 乔宁宁

    2016-01-01

    背景:全髋关节置换后关节囊及其周围韧带的修补与重建是预防置换后脱位的有效手段之一。近年来前外侧入路全髋关节置换被广泛应用,但髋前外侧关节囊及髂股韧带的应用解剖学研究国内外鲜有报道。目的:观测髋关节前外侧关节囊及髂股韧带的解剖学特点,为全髋关节置换入路及优化提供解剖参考数据。方法:使用30例经甲醛固定的成人髋关节标本,解剖出前外侧关节囊及髂股韧带,将其分为3区9部,分别测量每部的厚度、在转子间线附着点的宽度及到交汇点的距离。观测关节囊的起止、走行、分支及其组织学特点。结果与结论:髋前外侧关节囊与髂股韧带紧密愈合无法分开,形成关节囊髂股韧带复合体,其各部厚薄不一,其中BⅠ、BⅡ部最薄。此外,各区在转子间线的附着点的宽度和到交汇区的高度也不完全一样。关节囊起源于髂前下棘、髋臼缘向下走行分为3支止与转子间线。对髋前外侧关节囊及髂股韧带的了解有助于临床全髋关节置换过程中置换入路的选择及置换方式的设计与优化。%BACKGROUND:To repair and reconstruct the joint capsule and surrounding ligaments is one of effective methods against displacement and dislocation after total hip arthroplasty. In recent years, anterolateral total hip arthroplasty has been widely used, but little is reported on the anatomic features of the anterolateral hip joint capsule and iliofemoral ligament. OBJECTIVE:To investigate the anatomic features of the anterolateral hip joint capsule and iliofemoral ligaments, thereby providing anatomic evidence for selecting and optimizing the approach for total hip arthroplasty and for clinical practice. METHODS:Thirty adult cadaver hips fixed with formalin were used for this study. The anterolateral hip joint capsule and the iliofemoral ligaments were dissected and anterolateral hip joint

  9. Images from a jointly-arousing collective ritual reveal affective polarization

    DEFF Research Database (Denmark)

    Bulbulia, JosephA.; Xygalatas, Dimitris; Schjoedt, Uffe

    2013-01-01

    Collective rituals are biologically ancient and culturally pervasive, yet few studies have quantified their effects on participants. We assessed two plausible models from qualitative anthropology: ritual empathy predicts affective convergence among all ritual participants irrespective of ritual r...

  10. Correlation analysis of CT imaging measurement and anatomical measurement of temporomandibular joint%颞下颌关节CT影像测量与解剖测量的相关性分析

    Institute of Scientific and Technical Information of China (English)

    范光碧; 汤华军

    2016-01-01

    目的:探讨颞下颌关节CT影像测量与解剖测量的相关性。方法:选取10例具有完整头颅的男性尸体进行颞下颌关节测量,行 CT 测量为试验组,常规测量为对照组,比较相关参数。结果:两种测量方法的关节盘厚度、关节窝内外径、髁状突关节面水平倾斜角、髁状突颈最小面积及髁状突头最大面积差异不具有统计学意义(P>0.05),且呈直线相关(P<0.01)。结论:颞下颌关节 CT 影像测量具有和常规测量一样的准确性,且与常规测量手段呈直线相关。%Objective:To explore the correlation of CT imaging measurement and anatomical measurement of temporomandibular joint.Methods:10 male cadavers with complete skull were selected,and they were given the temporomandibular joint measurements.The experimental group was given CT measurement.The control group was given the conventional measurement. We compared the relevant parameters.Results:The differences in articular disc thickness,internal and external diameter of the joint fossa,horizontal inclination angle of the condylar articular surface,smallest area of the condylar neck and largest area of the condylar head between the two methods were not statistically significant(P>0.05),and they showed linear correlation(P<0.01). Conclusion:CT imaging measurement for the temporomandibular joint had the same accuracy with routine measurement,and it had a linear relationship with the conventional measuring method.

  11. Joint Mobile Data Collection and Wireless Energy Transfer in Wireless Rechargeable Sensor Networks.

    Science.gov (United States)

    Zhong, Ping; Li, Ya-Ting; Liu, Wei-Rong; Duan, Gui-Hua; Chen, Ying-Wen; Xiong, Neal

    2017-08-16

    In wireless rechargeable sensor networks (WRSNs), there is a way to use mobile vehicles to charge node and collect data. It is a rational pattern to use two types of vehicles, one is for energy charging, and the other is for data collecting. These two types of vehicles, data collection vehicles (DCVs) and wireless charging vehicles (WCVs), are employed to achieve high efficiency in both data gathering and energy consumption. To handle the complex scheduling problem of multiple vehicles in large-scale networks, a twice-partition algorithm based on center points is proposed to divide the network into several parts. In addition, an anchor selection algorithm based on the tradeoff between neighbor amount and residual energy, named AS-NAE, is proposed to collect the zonal data. It can reduce the data transmission delay and the energy consumption for DCVs' movement in the zonal. Besides, we design an optimization function to achieve maximum data throughput by adjusting data rate and link rate of each node. Finally, the effectiveness of proposed algorithm is validated by numerical simulation results in WRSNs.

  12. Joint kinematic calculation based on clinical direct kinematic versus inverse kinematic gait models.

    Science.gov (United States)

    Kainz, H; Modenese, L; Lloyd, D G; Maine, S; Walsh, H P J; Carty, C P

    2016-06-14

    Most clinical gait laboratories use the conventional gait analysis model. This model uses a computational method called Direct Kinematics (DK) to calculate joint kinematics. In contrast, musculoskeletal modelling approaches use Inverse Kinematics (IK) to obtain joint angles. IK allows additional analysis (e.g. muscle-tendon length estimates), which may provide valuable information for clinical decision-making in people with movement disorders. The twofold aims of the current study were: (1) to compare joint kinematics obtained by a clinical DK model (Vicon Plug-in-Gait) with those produced by a widely used IK model (available with the OpenSim distribution), and (2) to evaluate the difference in joint kinematics that can be solely attributed to the different computational methods (DK versus IK), anatomical models and marker sets by using MRI based models. Eight children with cerebral palsy were recruited and presented for gait and MRI data collection sessions. Differences in joint kinematics up to 13° were found between the Plug-in-Gait and the gait 2392 OpenSim model. The majority of these differences (94.4%) were attributed to differences in the anatomical models, which included different anatomical segment frames and joint constraints. Different computational methods (DK versus IK) were responsible for only 2.7% of the differences. We recommend using the same anatomical model for kinematic and musculoskeletal analysis to ensure consistency between the obtained joint angles and musculoskeletal estimates.

  13. Report on Pontoniinae shrimps (Crustacea: Decapoda) collected by Joint Chinese German Marine Biology Expeditions to Hainan Island, South China Sea Ⅱ.Harpiliopsis, Ischnopontonia, Jocaste, Palaemonella, Periclimenaeus, Periclimenella

    Institute of Scientific and Technical Information of China (English)

    李新正; 刘瑞玉

    2003-01-01

    The present paper reports 9 species of pontoniine shrimps collected from Hainan Island, South China Sea, by the Joint Chinese German Marine Biology Expeditions, in which, Periclimenaeus arabicus (Calman, 1939) and Periclimenaeus hecate (Nobili, 1904) are recorded for the first time from Hainan Island.

  14. Marine mammal observations collected by aircraft and ship and submitted as part of the ConocoPhillips and Shell Joint Monitoring Program in the Chukchi and Beaufort Seas, 2006-2007 (NODC Accession 0120531)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set was collected as part of the Joint Monitoring Program during seismic activities in the Chukchi Sea. The 2006 data was collected by ship and aircraft as...

  15. Establishing better biological models to understand occlusion.I:TM joint anatomic relationships%建立更好的生物模型以深入了解咬合

    Institute of Scientific and Technical Information of China (English)

    PULLINGER(综述); 张晗(译); 徐珂(译)

    2015-01-01

    are a common basis to reject any useful prediction value.Notwithstanding,a relationship of form with function is a basic tenet of biology.These are multifactor problems,but the questions mostly have not been analysed as such.This review moves the question forward by focusing on TMjoint anatomic organisation as the multifactor system it is expected to be in a closed system like a synovial joint.Multifactor analysis allows the data to speak for itself and reduces bias.Classification tree analysis revealed useful prediction values and usable clinical models which are illustrated,backed up by stepwise logistic regression.Explained vari-ance,R2 ,predicting normals from pooled TMJ patients was 32.6%,sensitivity 67.9%,specificity 85.7%;37% versus disc displacement with reduction;and 28.8% versus disc displacement without reduction.Significant osseous organisational differences between TMjoints with clicking and locking suggest that this is not necessarily a single disease continuum.However,a subset of joints with clicking contained char-acteristics of joints with locking that might contribute to symptom progression versus resistance.Moderately strong models confirm there is a relationship between TMJ osseous organisation and function,but it should not be overstated.More than one model of normals and of TMde-rangement organisation is revealed.The implications to clinical decision-making are discussed.

  16. Anatomical parameters for percutaneous lag screw fixation of the sacroiliac joint%骶髂关节经皮拉力螺钉固定钉道参数的解剖学测量

    Institute of Scientific and Technical Information of China (English)

    游景扬; 王钢; 黎润光; 陈滨; 任高宏; 杨建涛; 刘善宇

    2010-01-01

    Objective To provide anatomic evidence for iliosacral screw fixation at the pedicle level of the first sacral vertebra(S1).Methods Virtual three-dimensional models were reconstructed on the basis of computed tomography(CT)scans obtained from 50 adult patients without any bony problem.The percutaneous lag screw fixation of the sacroiliac joint was simulated.The width and height of the S1 pedicle,the optimal entry points for iliosacral screws on the outer posterolateral ilium,the directions of screws,and the distances from the entry point to the contrary anterior cortex of the S1 vertebral body and to the posterior superior lilac spine were measured.Results The width and height of the S1 pedicle were(20.43 ±1.63)mm and(20.26±0.99)mm,respectively.The optimal entry points of the 2 iliosacral screws were on both above the line between the anterior superior iliac spine and the posterior superior iliac spine.The distances to the posterior superior lilac spine were(49.87 ± 6.80)mm and(51.11 ± 7.15)mm,respectively.Iliosacral screws got into the S1 pedicle in parallel,perpendicular to the outer posterolateral ilium,with 18.35°± 5.20°to the coronal plane and 77.62°± 3.98° to the sagittal plane.The distances from the entry points of 2 iliosacral screws to the contrary anterior cortex of S1 vertebral body were(76.08 ± 4.32)mm and(77.62 ± 3.98)mm,respectively.Differences in length,the width and height of the S1 pedicle,distance to the posterior superior iliac spine and angle to the coronal plane of the iliosacral screws between men and women were of statistical significance(P <0.05).Conclusions Two iliosacral screws of 6.5 mm in diameter can be implanted at the level of the first sacral vertebra in healthy adults.The anatomic parameters measured can be applied in design of the surgical navigation template for percutaneous lag screw fixation of the sacroiliac joint.%目的 为经S_1椎弓根水平骶髂关节拉力螺钉固定术提供应用解剖学依据.方法 2008

  17. On the expression of joint moments during gait.

    Science.gov (United States)

    Schache, Anthony G; Baker, Richard

    2007-03-01

    The purpose of the current study was to examine the effect of different reference frames on lower limb joint moments during gait with a view to identifying a recommended convention for clinical purposes. Data were collected from 10 subjects (nine able-bodied adults and one child with diplegic cerebral palsy) whilst walking at a self-selected speed. Calculations utilised a three-dimensional inverse dynamics model. For each joint, moments were expressed in four different reference frames. Three of the frames were orthogonal: laboratory frame; anatomical frame of proximal segment; anatomical frame of distal segment. The fourth reference frame was a non-orthogonal joint coordinate system (JCS). Significant differences in the joint moment profiles during gait were found with alternative references frames. This was apparent primarily for the transverse plane joint moments for able-bodied adult gait. For the pathological gait pattern presented, there were also marked differences in the frontal plane joint moments and more subtle ones in the sagittal plane. Whilst it is recognised that all possible reference frames for the expression of the net moment vector are mathematically valid, a decision needs to be made as to which one is more clinically useful. It is proposed that the non-orthogonal JCS is most logical on the basis of what, biomechanically, the joint moment actually represents.

  18. Shoulder joint: overview and clinical evaluation

    OpenAIRE

    Umaña Calderón, Andrés

    2015-01-01

    The shoulder joint is a complex anatomical unit, in which different structures work together so it can have a great range of motion while maintaining its integrity and stability. Shoulder joint disease is a common consultation reason in emergency and primary care services, thus representing a challenge for health care providers, given its complexity and important anatomical relationships. The purpose of this paper is to present a review of the main anatomical considerations of the shoulder jo...

  19. Distributed Joint Cluster Formation and Resource Allocation Scheme for Cooperative Data Collection in Virtual MIMO-Based M2M Networks

    Directory of Open Access Journals (Sweden)

    Xi Luan

    2015-01-01

    Full Text Available An efficient data collection scheme plays an important role for the real-time intelligent monitoring in many machine-to-machine (M2M networks. In this paper, a distributed joint cluster formation and resource allocation scheme for data collection in cluster-based M2M networks is proposed. Specifically, in order to utilize the advantages of cooperation, we first propose a hierarchical transmission model which contains two communication phases. In the first phase, the intracluster information sharing is carried out by all the nodes within the same cluster. Then these nodes transmit the total information to the BS cooperatively with virtual-MIMO (VMIMO protocol in the second phase. To grasp the properties and advantages of this cooperative transmission strategy, the theoretical analysis results are provided. The key issue in this system is to form the clusters and allocate resources efficiently. Since the optimization problem on this issue is an NP-hard problem, a feasible joint scheme for the cluster formation and resource allocation is proposed in this paper, which is carried out via coalition formation game with a distributed algorithm. This scheme can reduce the complexity while keeping an attractive performance. Simulation results show the properties of the proposed scheme and its advantages when comparing with the noncooperative scheme for the data collection in a practical scenario.

  20. Conjoined tendon and coracoacromial ligament transfer in the treatment of RockwoodIII acromioclavicular joint dislocation:anatomical and clinical validation%联合腱与喙肩韧带双束重建喙锁韧带修复RockwoodⅢ型肩锁关节脱位:解剖学及临床试验验证

    Institute of Scientific and Technical Information of China (English)

    王治洲; 伊力哈木•托合提; 徐超; 侯彦杰; 郭洪亮; 甘子明; 张爱红

    2015-01-01

      结果与结论:①尸体解剖形态学研究结果:试验获得了肩锁关节及其周围组织、肌皮神经较为详细的形态学参数,为该部位手术提供了解剖学资料。②临床病例分析结果:11例RockwoodⅢ型患者行联合腱外侧半肌腱与喙肩韧带内侧半肌腱双束共同重建喙锁韧带治疗肩锁关节脱位,随访2-24个月,平均美国肩肘外科协会评分为92.3分,平均Constant-Murley肩关节功能评分为90.4分,平均美国加州大学洛杉矶分校评分31.6分,平均目测类比评分1.4分,平均肩关节简明测试问卷肯定答案为8个,总体优良率为91%(10/11)。1例患者修复结果较差。课题通过解剖重建肩锁关节的静态稳定性结构(如喙锁韧带)和动态稳定性结构(如关节囊、斜方肌和三角肌)实现了肩锁关节的解剖复位。总而言之,联合腱与喙肩韧带双束重建喙锁韧带修复RockwoodⅢ型肩锁关节脱位是一种有效的修复方法。%BACKGROUND:There are many surgical methods for treatment of acromioclavicular joint dislocation. Through various internal fixation materials (such as hook plate, screws, K-wire, etc.), we can achieve the initial stability and restoration of the acromioclavicular joint. But these internal fixators can cause varying degrees of occupancy and damage to the acromioclavicular joint, and the joint reduction often miss after removal of the internal fixators. OBJECTIVE:To use conjoined tendon and coracoacromial ligament transfer for coracoclavicular ligament reconstruction in the repair of RockwoodIII acromioclavicular joint dislocation, to provide the theoretical foundation through the autopsy, and to analyze the clinical efficacy based on clinical fol ow-up results. METHODS:(1) Autopsy morphology research:From September 2012 to November 2012, total y 46 adult cadaveric human shoulders were dissected in the Department of Anatomy, Xinjiang Medical University. The anatomical

  1. [Fractures of the elbow joint].

    Science.gov (United States)

    Nowak, T E; Dietz, S O; Burkhart, K J; Müller, L P; Rommens, P M

    2012-02-01

    Fractures around the elbow joint comprise fractures of the distal humerus, the radial head, the olecranon and the coronoid process. Combined lesions are particularly demanding for the surgeon. Accurate knowledge of the anatomy and of the biomechanics is an essential requirement for a specific diagnosis and therapy. A stable and painless movable elbow joint is essential for most of the activities of daily living. Risk factors for the development of posttraumatic elbow joint arthrosis are non-anatomically reconstructed joint surfaces, axial malalignment of the joint axis and untreated concomitant injuries. Modern angular stable and anatomically preshaped implants facilitate a biomechanically adequate osteosynthesis and avoid or decrease functional impairment. In consideration of an increasing number of osteoporotic elbow joint fractures, endoprosthetic replacement has gained significance.

  2. Bat Wing Surgical Approach for the Temporomandibular Joint

    National Research Council Canada - National Science Library

    Garcia y Sanchez, J M; Davila Torres, J; Pacheco Rubio, G; Gómez Rodríguez, C L

    The temporomandibular joint (TMJ) is anatomically complex; with its close proximity to neurovascular structures, including the facial nerve that gives a high degree of difficulty during surgical exposure...

  3. Lessons Learned from Near Field Modeling and Data Collected at the SPE Chemical Explosions in Jointed Rock Masses

    Science.gov (United States)

    Vorobiev, O.; Ezzedine, S. M.; Hurley, R.; Antoun, T.; Glenn, L.

    2016-12-01

    This work describes the near-field modeling of wave propagation from underground chemicalexplosions conducted at the Nevada National Security Site (NNSS) in fractured granitic rock. Lab testsperformed on granite samples excavated from various locations at the SPE site have shown littlevariability in mechanical properties. Granite at this scale can be considered as an isotropic medium. Wehave shown, however, that on the scale of the pressure waves generated during chemical explosions(tens of meters), the effective mechanical properties may vary significantly and exhibit both elastic andplastic anisotropies due to local variations in joint properties such as spacing orientation, joint aperture,cohesion and saturation. Since including every joint in a discrete fashion in computational model is notfeasible, especially for large-scale calculations ( 1.5 km domain), we have developed a computationaltechnique to upscale mechanical properties for various scales (frequencies) using geophysicalcharacterization conducted during recent SPE tests at the NNSS. Stochastic representation of thesefeatures based on the field characterizations has been implemented into LLNL's Geodyn-L hydrocode.Scale dependency in mechanical properties is important in order to understand how the ground motionscales with yield. We hope that such an approach will not only provide a better prediction of theground motion observed in the SPE (where the yield varies from 100 kg to few tons of TNT equivalent)but also will allow us to extrapolate results of the SPE to sources with bigger yields. We have validatedour computational results by comparing the measured and computed ground motion at various rangesfor experiments of various yields (SPE1-SPE5). Using the new model we performed severalcomputational studies to identify the most important mechanical properties of the rock mass specific tothe SPE site and to understand their roles in the observed ground motion in the near-field. We willpresent a series

  4. Benign and malignant cartilage tumors of bone and joint: their anatomic and theoretical basis with an emphasis on radiology, pathology and clinical biology. Pt. 1. The intramedullary cartilage tumors

    Energy Technology Data Exchange (ETDEWEB)

    Brien, E.W. [Orthopaedic Oncology Service, Orthopaedic Hospital, Los Angeles, CA (United States)]|[Musculoskeletal Tumor Service, Orthopaedic Hospital, Los Angeles, CA (United States); Mirra, J.M. [Orthopaedic Oncology Service, Orthopaedic Hospital, Los Angeles, CA (United States); Kerr, R. [Orthopaedic Oncology Service, Orthopaedic Hospital, Los Angeles, CA (United States)

    1997-06-01

    We reviewed 845 cases of benign and 356 cases of malignant cartilaginous tumors from a total of 3067 primary bone tumors in our database. Benign cartilaginous lesions are unique because the epiphyseal plate has been implicated in the etiology of osteochondroma, enchondroma (single or multiple), periosteal chondromas and chondroblastoma. In the first part of this paper, we will review important clinical, radiologic and histologic features of intramedullary cartilaginous lesions in an attempt to support theories related to anatomic considerations and pathogenesis. (orig.). With 44 figs., 2 tabs.

  5. TIBIAL LANDMARKS IN ACL ANATOMIC REPAIR

    Directory of Open Access Journals (Sweden)

    M. V. Demesсhenko

    2016-01-01

    Full Text Available Purpose: to identify anatomical landmarks on tibial articular surface to serve as reference in preparing tibial canal with respect to the center of ACL footprint during single bundle arthroscopic repair.Materials and methods. Twelve frozen knee joint specimens and 68 unpaired macerated human tibia were studied using anatomical, morphometric, statistical methods as well as graphic simulation.Results. Center of the tibial ACL footprint was located 13,1±1,7 mm anteriorly from posterior border of intercondylar eminence, at 1/3 of the distance along the line connecting apexes of internal and external tubercles and 6,1±0,5 mm anteriorly along the perpendicular raised to this point.Conclusion. Internal and external tubercles, as well as posterior border of intercondylar eminence can be considered as anatomical references to determine the center of the tibial ACL footprint and to prepare bone canals for anatomic ligament repair.

  6. Early fetal anatomical sonography.

    LENUS (Irish Health Repository)

    Donnelly, Jennifer C

    2012-10-01

    Over the past decade, prenatal screening and diagnosis has moved from the second into the first trimester, with aneuploidy screening becoming both feasible and effective. With vast improvements in ultrasound technology, sonologists can now image the fetus in greater detail at all gestational ages. In the hands of experienced sonographers, anatomic surveys between 11 and 14 weeks can be carried out with good visualisation rates of many structures. It is important to be familiar with the normal development of the embryo and fetus, and to be aware of the major anatomical landmarks whose absence or presence may be deemed normal or abnormal depending on the gestational age. Some structural abnormalities will nearly always be detected, some will never be and some are potentially detectable depending on a number of factors.

  7. Reference Man anatomical model

    Energy Technology Data Exchange (ETDEWEB)

    Cristy, M.

    1994-10-01

    The 70-kg Standard Man or Reference Man has been used in physiological models since at least the 1920s to represent adult males. It came into use in radiation protection in the late 1940s and was developed extensively during the 1950s and used by the International Commission on Radiological Protection (ICRP) in its Publication 2 in 1959. The current Reference Man for Purposes of Radiation Protection is a monumental book published in 1975 by the ICRP as ICRP Publication 23. It has a wealth of information useful for radiation dosimetry, including anatomical and physiological data, gross and elemental composition of the body and organs and tissues of the body. The anatomical data includes specified reference values for an adult male and an adult female. Other reference values are primarily for the adult male. The anatomical data include much data on fetuses and children, although reference values are not established. There is an ICRP task group currently working on revising selected parts of the Reference Man document.

  8. Anatomy and histology of the sacroiliac joints.

    Science.gov (United States)

    Egund, Niels; Jurik, Anne Grethe

    2014-07-01

    The anatomy of joints provides an important basis for understanding the nature and imaging of pathologic lesions and their imaging appearance. This applies especially to the sacroiliac (SI) joints, which play a major role in the diagnosis of spondyloarthritis. They are composed of two different joint portions, a cartilage-covered portion ventrally and a ligamentous portion dorsally, and thus rather complex anatomically. Knowledge of anatomy and the corresponding normal imaging findings are important in the imaging diagnosis of sacroiliitis, especially by MR imaging. A certain distinction between the two joint portions by MR imaging is only obtainable by axial slice orientation. Together with a perpendicular coronal slice orientation, it provides adequate anatomical information and thereby a possibility for detecting the anatomical site of disease-specific characteristics and normal variants simulating disease. This overview describes current knowledge about the normal macroscopic and microscopic anatomy of the SI joints.

  9. A cadaveric study on sacroiliac joint injection.

    Science.gov (United States)

    Zou, Yu-Cong; Li, Yi-Kai; Yu, Cheng-Fu; Yang, Xian-Wen; Chen, Run-Qi

    2015-02-01

    The scope of this study was to explore the possibility as well as the feasibility of sacroiliac joint injection following simple X-ray clip location. For the cadaveric study, 10 fixed sacroiliac joint (SIJ) sectional specimens, 4 dried cadaveric pelvises and 21 embalmed adult cadaveric pelvises were dissected, followed by an injection of contrast agent into the joint. The irrigation of the agent was observed through CT scanning. For the radiologic study, 188 CT scans of ankylosing spondylitis patients (143 male, 45 female) were collected from 2010 to 2012, in Nanfang Hospital. What was measured was (1) Distance between the posterior midline and sagittal synovium; (2) Length of the sagittal synovium; (3) Distance between the midpoint of the sagittal synovium and posterior superior iliac spine; and (4) Distance between the superficial skin vertical to the sagittal synovium point were measured. For the practice-based study: 20 patients (17 males and 3 females) with early ankylosing spondylitis, from Nanfang Hospital affiliated with Southern Medical University were recruited, and sacroiliac joint unguided injections were done on the basis of the cadaveric and radiologic study. Only the inferior 1/3(rd) portion parallel to the posterior midline could be injected into since the superior 2/3(rd) portion were filled with interosseous ligaments. Thirteen of the 20 patients received successful injections as identified by CT scan using the contrast agent. Sacroiliac joint injection following simple X-ray clip location is possible and feasible if the operation is performed by trained physicians familiar with the sacroiliac joint and its surrounding anatomic structures.

  10. Understanding anatomical terms.

    Science.gov (United States)

    Mehta, L A; Natrajan, M; Kothari, M L

    1996-01-01

    Words are our masters and words are our slaves, all depending on how we use them. The whole of medical science owes its origin to Greco-Roman culture and is replete with terms whose high sound is not necessarily accompanied by sound meaning. This is even more the case in the initial, pre-clinical years. Anatomical terminology seems bewildering to the initiate; and maybe that is a reason why love of anatomy as a subject does not always spill over through later years. Employing certain classifications of the origin of the anatomical terms, we have prepared an anthology that we hope will ease the student's task and also heighten the student's appreciation of the new terms. This centers on revealing the Kiplingian "how, why, when, where, what, and who" of a given term. This presentation should empower students to independently formulate a wide network of correlations once they understand a particular term. The article thus hopes to stimulate students' analytic and synthetic faculties as well. A small effort can reap large rewards in terms of enjoyment of the study of anatomy and the related subjects of histology, embryology, and genetics. It is helpful to teachers and students alike. This exercise in semantics and etymology does not demand of the student or his teacher any background in linguistics, grammar, Greek, Latin, Sanskrit, anatomy, or medicine.

  11. A veterinary digital anatomical database.

    Science.gov (United States)

    Snell, J R; Green, R; Stott, G; Van Baerle, S

    1991-01-01

    This paper describes the Veterinary Digital Anatomical Database Project. The purpose of the project is to investigate the construction and use of digitally stored anatomical models. We will be discussing the overall project goals and the results to date. Digital anatomical models are 3 dimensional, solid model representations of normal anatomy. The digital representations are electronically stored and can be manipulated and displayed on a computer graphics workstation. A digital database of anatomical structures can be used in conjunction with gross dissection in teaching normal anatomy to first year students in the professional curriculum. The computer model gives students the opportunity to "discover" relationships between anatomical structures that may have been destroyed or may not be obvious in the gross dissection. By using a digital database, the student will have the ability to view and manipulate anatomical structures in ways that are not available through interactive video disk (IVD). IVD constrains the student to preselected views and sections stored on the disk.

  12. A veterinary digital anatomical database.

    OpenAIRE

    Snell, J.R.; Green, R; Stott, G; Van Baerle, S.

    1991-01-01

    This paper describes the Veterinary Digital Anatomical Database Project. The purpose of the project is to investigate the construction and use of digitally stored anatomical models. We will be discussing the overall project goals and the results to date. Digital anatomical models are 3 dimensional, solid model representations of normal anatomy. The digital representations are electronically stored and can be manipulated and displayed on a computer graphics workstation. A digital database of a...

  13. Occipital neuralgia: anatomic considerations.

    Science.gov (United States)

    Cesmebasi, Alper; Muhleman, Mitchel A; Hulsberg, Paul; Gielecki, Jerzy; Matusz, Petru; Tubbs, R Shane; Loukas, Marios

    2015-01-01

    Occipital neuralgia is a debilitating disorder first described in 1821 as recurrent headaches localized in the occipital region. Other symptoms that have been associated with this condition include paroxysmal burning and aching pain in the distribution of the greater, lesser, or third occipital nerves. Several etiologies have been identified in the cause of occipital neuralgia and include, but are not limited to, trauma, fibrositis, myositis, fracture of the atlas, and compression of the C-2 nerve root, C1-2 arthrosis syndrome, atlantoaxial lateral mass osteoarthritis, hypertrophic cervical pachymeningitis, cervical cord tumor, Chiari malformation, and neurosyphilis. The management of occipital neuralgia can include conservative approaches and/or surgical interventions. Occipital neuralgia is a multifactorial problem where multiple anatomic areas/structures may be involved with this pathology. A review of these etiologies may provide guidance in better understanding occipital neuralgia.

  14. 膝关节软骨人体标本解剖与磁共振成像的比较研究%MR imaging and anatomic study of articular cartilage of the knee joint

    Institute of Scientific and Technical Information of China (English)

    林志春; 翟磊; 徐达传; 刘晓静; 李慧灵; 陈燕萍; 张雪林

    2011-01-01

    目的 探讨膝关节尸体标本解剖与磁共振成像(MRI)三维序列-扰相梯度回波序列(3D-FS-SPGR)测量关节软骨厚度的差异,并分析软骨组织主要成分在关节软骨不同位置的差异.方法选用国人青壮年中等身材、无明显关节病变的成年男性尸体膝关节标本2具,首先进行3D-FS-SPGR序列矢状位扫描.复冻后按解剖部位进行矢状位解剖,分别对股骨及胫骨内、外髁负重区前、后面及髌骨面软骨厚度进行测量.关节软骨石蜡切片进行维多利亚蓝-丽春红复合染色并观察.结果 软骨尸体标本解剖与3D-FS-SPGR序列测得的膝关节软骨厚度:股骨外侧髁前负重面平均分别为2.25、2.25 mm,股骨外侧髁后负重面平均分别为2.70、2.75 mm,胫骨外侧髁前负重面平均分别为2.00、2.10 mm;胫骨外侧髁后负重而平均分别为2.35、2.25 mm,股骨内侧髁前负重面平均分别为2.20、2.20 mm,股骨内侧髁后负重面平均分别为2.15、2.30 mm,胫骨内侧髁前负重面半均分别为2.20、2.45mm,胫骨内侧髁后负重面平均分别为2.70、2.95 mm,髌骨面软骨平均分别为3.08、3.15 mm.软骨组织学染色显示:关节软骨表层胶原纤维含量相对较多,软骨细胞及其周围基质相对较少;在关节软骨深层,胶原纤维含量相对较少,而软骨及软骨周围基质相对较多.结论 3D-FS-SPGR序列能够相对真实地反映关节软骨的形态及厚度.胶原纤维主要集中在软骨表层,其分布与软骨的功能相一致.%Objective To compare corpse sampling and MR imaging with 3D-FS-SPGR sequences in measurement of the articular cartilage thickness and to investigate knee cartilage topography. Methods Two fresh specimens of the knee joint were obtained from 2 normal young adult male corpses of medium stature. MR1 scanning was carried on the 2 specimens in sagittal 3D-FS-SPGR MR sequences. After defrosted,the knee specimens were dissected longitudinally, and the cartilage

  15. Anatomic plerosis and the character of functional restoration after the injuries of distal radioulnar joint%下尺桡关节损伤后解剖学修复及其功能重建特征

    Institute of Scientific and Technical Information of China (English)

    方永超; 顾德毅; 虞堂云

    2005-01-01

    目的:总结近年来下尺桡关节损伤在解剖、生物力学、损伤机制、诊断特点和治疗方面的研究进展,并对不同的治疗方法进行评估.资料来源:应用计算机检索下尺桡关节损伤方面的文献.①对www.ncbi.nlm.nih.gov/PubMed2003-01/2005-04文献进行检索,检索词为"the distal radioulnar joint",限定文章语言为English.②同时检索http:∥www.wanfangdata.com.cn/1995-01/2004-12文献,检索词为"下尺桡关节",限定文章语言种类为中文.资料选择:纳入条件:①实验研究.②临床研究.排除条件:①下尺桡关节肿瘤、畸形、退行性变类文献.②重复研究文献.③综述文献.资料提炼:共收集到141篇关于下尺桡关节的解剖、生物力学、损伤机制、诊断特点和治疗方面的文章,重点引用文献23篇,排除118篇.资料综合:①解剖和生物力学:在外科手术中,如果要保持正常的生物力学,下尺桡关节的解剖完整性应该保持.②损伤机制和诊断特点:对前臂损伤进行详细的查体尤其重要,一定要对受伤部位的上下关节详细检查,并对肘关节损伤患者的下尺桡关节不稳定有清楚认识.利用一些较新的技术能增加早期诊断正确率.③治疗:下尺桡关节损伤保守治疗:采用前臂完全旋后位夹板固定治疗下尺桡关节背侧脱位(Ⅰ型脱位)36例,效果优良;早期手术治疗:手法复位后直接经皮钳固定下尺桡关节脱位,这种方法具有固定物体积小,固定牢,操作简单的优点;晚期则必须进行补救手术,包括尺骨小头切除术、Sauve-Kapandji术、韧带转位重建术、旋前方肌骨膜瓣转位术、尺骨缩短或桡骨延长术等,各手术有其各自优缺点及适应症,但或多或少都残留一定的后遗症,应尽量做到远端尺桡关节的解剖学重建.结论:下尺桡关节损伤应该引起临床医师的重视,如何有效的早期诊断和有效的避免后遗症将是今后研究的发展方向.

  16. 膝关节后纵隔解剖特点及其在关节镜手术中的应用%ANATOMIC FEATURES OF POSTERIOR SEPTUM OF KNEE JOINT AND ITS APPLICATION IN POSTERIOR TRANS-SEPTAL PORTAL FOR ARTHROSCOPIC SURGERY

    Institute of Scientific and Technical Information of China (English)

    孙金鹏; 熊依林; 雷光华

    2013-01-01

    目的 总结膝关节后纵隔解剖特点及其在关节镜手术中,尤其是跨后纵隔通路建立中的应用. 方法 查阅近年国内外有关膝关节后纵隔及膝关节镜的文献,并进行归纳分析. 结果 后纵隔上部血管、神经较丰富,在胫骨平台水平与腘动脉紧邻:将膝关节后室分为较小的外室和较大的内室.膝关节镜下建立跨后纵隔通道时应屈膝90°,方向由外向内,从后纵隔中间靠下部穿过较安全. 结论 跨后纵隔通道使膝关节镜应用范围大大扩展,但通道建立方法并不统一,只有综合考虑后纵隔解剖学特点,才能减少手术并发症.%Objective To summarize the anatomic features of the posterior septum of the knee joint and its application in posterior trans-septal portal for arthroscopic surgery. Methods The literature related to posterior septum of the knee joint and arthroscopic surgery was extensively reviewed and analyzed. Results The posterior septum of the knee joint has more mechanoreceptors and blood vessels in the upper part, which are close to arteria popliteal at the tibial plateau level; the posterior compartment is divided into wider posteromedial and narrower posterolateral compartments. A safe arthroscopic trans-septal portal is established, in the knee flexion of 90°, in a lateral-to-medial direction, and with an inserting location below the middle of posterior septum. Conclusion The establishment method of posterior trans-septal portal is not uniform and all the features of posterior septum should be considered to decrease the complications.

  17. Open anatomical coracoclavicular ligament reconstruction using a tendon graft with an Endobutton loop.

    Science.gov (United States)

    Shetty, Nagraj S; Yoo, Yon S; Kim, Do Y; Lee, Sang S; Jeong, Un S

    2009-12-01

    We describe a technique of open anatomical coracoclavicular ligament reconstruction restoring both parts of the native ligament, aiming at achieving maximum stability of the acromioclavicular joint without disturbing the normal anatomy. Using the same anatomical principle of ligament reconstruction as in other joints, transosseous tunnels are created at the native footprints of the conoid and trapezoid ligaments. An autologous graft is fixed using an Endobutton continuous loop and a PEEK screw; adequate healing of the ligament is ensured with an appropriate working length. Although an open procedure, this technique offers several advantages. It can be easily reproduced using basic anatomical principles and simple cost-effective instrumentation. The implant does not have to be removed, important anatomical structures are respected, normal acromioclavicular joint kinematics are restored, the scar is cosmetically acceptable and post-operative morbidity is very low.

  18. Surgical treatment for young adult hip dysplasia: joint-preserving options

    National Research Council Canada - National Science Library

    Chen, Min; Shang, Xi-Fu

    2016-01-01

    Developmental dysplasia of the hip (DDH) is a spectrum of disorders that results in anatomic abnormalities leading to increased contact stress in the joint and, eventually, secondary osteoarthritis...

  19. Collective Enumeration

    Science.gov (United States)

    Bahrami, Bahador; Didino, Daniele; Frith, Chris; Butterworth, Brian; Rees, Geraint

    2013-01-01

    Many joint decisions in everyday life (e.g., Which bar is less crowded?) depend on approximate enumeration, but very little is known about the psychological characteristics of counting together. Here we systematically investigated collective approximate enumeration. Pairs of participants made individual and collective enumeration judgments in a…

  20. Collective Enumeration

    Science.gov (United States)

    Bahrami, Bahador; Didino, Daniele; Frith, Chris; Butterworth, Brian; Rees, Geraint

    2013-01-01

    Many joint decisions in everyday life (e.g., Which bar is less crowded?) depend on approximate enumeration, but very little is known about the psychological characteristics of counting together. Here we systematically investigated collective approximate enumeration. Pairs of participants made individual and collective enumeration judgments in a…

  1. Dimensions and geometry of the temporomandibular joint and masseter muscles.

    Science.gov (United States)

    Zurowski, R; Gosek, M; Aleksandrowicz, R

    1976-01-01

    The bio-engineering team presents its suggestion of a method for the measurement of the temporomandibular joint and masseter muscles in order to determine the parameters necessary for exact sciences and indispensable for unified and objective cognitive studies. Ten formalin-fixed human cadavers served for the studies. The preparations were prepared by the modified method of anatomical procedure. Linear and angular measurements of temporomandibular joint and masseter muscles were carried out with the use of the three-dimensional Cartesian system of OXYZ coordinates in relation to frontal, sagittal and horizontal planes. The physiological cross-sections of the masseter, temporal, lateral and medial pterygoid muscles were also determined. The collected data make it possible to develop a mathematical three-dimensioned model of the osseo-articulo-muscular system of the mastication organ.

  2. Anatomical adaptations of aquatic mammals.

    Science.gov (United States)

    Reidenberg, Joy S

    2007-06-01

    This special issue of the Anatomical Record explores many of the anatomical adaptations exhibited by aquatic mammals that enable life in the water. Anatomical observations on a range of fossil and living marine and freshwater mammals are presented, including sirenians (manatees and dugongs), cetaceans (both baleen whales and toothed whales, including dolphins and porpoises), pinnipeds (seals, sea lions, and walruses), the sea otter, and the pygmy hippopotamus. A range of anatomical systems are covered in this issue, including the external form (integument, tail shape), nervous system (eye, ear, brain), musculoskeletal systems (cranium, mandible, hyoid, vertebral column, flipper/forelimb), digestive tract (teeth/tusks/baleen, tongue, stomach), and respiratory tract (larynx). Emphasis is placed on exploring anatomical function in the context of aquatic life. The following topics are addressed: evolution, sound production, sound reception, feeding, locomotion, buoyancy control, thermoregulation, cognition, and behavior. A variety of approaches and techniques are used to examine and characterize these adaptations, ranging from dissection, to histology, to electron microscopy, to two-dimensional (2D) and 3D computerized tomography, to experimental field tests of function. The articles in this issue are a blend of literature review and new, hypothesis-driven anatomical research, which highlight the special nature of anatomical form and function in aquatic mammals that enables their exquisite adaptation for life in such a challenging environment.

  3. Anatomic security of applying different numbers of screws at the sacrum sides in the anterior double plate fixation of the sacroiliac joint%骶髂关节前路双钢板固定骶骨侧不同螺钉数量的解剖安全性研究

    Institute of Scientific and Technical Information of China (English)

    刘佳; 高仕长; 倪卫东; 蒋电明; 周程鹏

    2012-01-01

    0bjective: To compare the anatomic security of applying different numbers of screws at the sacrum sides in the anterior double plates fixation of the sacruiliac joint and to clarify which is safer when the stability of the fixation is considered. Methods: (1) Totally 15 normal cadavers pelvis were scanned by CT. Thin-section CT scan data were saved and analyzed by the software Materi-alise's interactive medical image control system (MIMICS 10.0). The virtual operations of the anterior double plates approach for fixation of the sacroiliac joint were performed in the same software. (2)The left sides of the sacroiliac joint were named as group A,in which two screws were placed into the sacrum sides. The right sides of the sacroiliac joint were named as group B,in which one screw was placed into the sacrum sides. The distances from the medial edge of the plates to the lateral sides of the anterior branches of lumbar nerves 4,5 were measured. The relationship of the screws and the sacroiliac joint was checked by radiograph. Results: (1 )In the virtual operations,the sacrum sides can accommodate two screws safely- (2)In group A,the distances from the medial edge of the upper and lower plates to the lateral sides of the anterior branches of lumbar nerve 5 were (3.0 ± 1.4) mm and (1.5 ± 1.0) mm respectively. The upper and lower plates can be placed below the anterior branches of lumbar nerve 4 safely. In group B,the distances from the medial edge of the upper plates to the lateral sides of the anterior branches of lumbar nerves 4,5 were (5.0 ± 1.1) mm and (10.3 ±1.3) mm respectively and those from the medial edge of the lower plates were (2.7 ± 0.5) mm and (5.1 ±0.9) nun respectively. (3)ln X-ray examination,no screw of the left upper plates was found in the sacroiliac joint in group A and 4 screws of the left lower plates were observed. On the other hand, no screw of the right plates (lower and upper) in the group B was found in the sacroiliac joint. Conclusions

  4. Temporomandibular joint examination reviewed

    Directory of Open Access Journals (Sweden)

    L. Guarda Nardini

    2011-09-01

    Full Text Available The temporo-mandibular joint (TMJ it’s a joint closely related to the skull base, the spine, and the jaws; all these anatomical structures must be taken in consideration when evaluating pain involving the tmj. In order to detect patients affected by pathology or dysfunctions of the tmj, physical examination is of great value in orienting the diagnosis. Inspection must consider the symmetry of the body, the dental status and the type of occlusion. Palpation is a way to assess contractiont involving the muscles of the masticatory system and of the neck. Auscultation, based on articular noise provides means to determine whether we are dealing with degeneration of the joint or a dislocation of the intrarticular disc. In order to confirm the diagnosis obtained with the clinical evaluation, it’s useful to perform imaging techniques as opt, tomography and TC of the tmj and electromyokineosiography – index of the mandibular functionality and of the muscles status. MRI and dynamic MRI are among the non invasive exams which give the greatest amount of information, regarding the disc position and the joint degeneration. Arthroscopy is an invasive technique that allows early diagnosis of degeneration and is helpful to reveal early inflammatory processes of the joint.

  5. Pterion: An anatomical variation and surgical landmark

    Directory of Open Access Journals (Sweden)

    Prashant E Natekar

    2011-01-01

    Full Text Available Introduction : The frontal and the parietal bones superiorly and the greater wing of the sphenoid and the squamous temporal inferiorly of one side meet at an H-shaped sutural junction termed the pterion. This is an important anatomical and anthropological landmark as it overlies both the anterior branch of middle meningeal artery and the lateral fissure of the cerebral hemisphere. The knowledge of sutural joints between frontal, parietal, sphenoid and temporal bones at pterion is clinically, radiologically and surgically important during surgical interventions involving burr hole surgeries. Materials and Methods : Study performed on 150 dry temporal bones. The pterion, and its sutural articulations with frontal, parietal, sphenoid and temporal bones and also anatomical variations, if any, were studied. Results : Four types of pterion, i.e. sphenoparietal, frontotemporal, stellate and epipteric, were observed. Conclusions : The knowledge of the variations of pterion and its surgical anatomy, in Indian population are important for surgeons operating in the fieldThe present study will also contribute additional information of skull bone fractures in infancy and early childhood, which may be associated with large intersutural bones giving false appearance of fracture radiologically and also during surgical interventions involving burr hole surgeries, as their extensions may lead to continuation of fracture lines.

  6. Management of chronic unstable acromioclavicular joint injuries.

    Science.gov (United States)

    Cisneros, Luis Natera; Reiriz, Juan Sarasquete

    2017-03-08

    The acromioclavicular joint represents the link between the clavicle and the scapula, which is responsible for the synchronized dynamic of the shoulder girdle. Chronic acromioclavicular joint instability involves changes in the orientation of the scapula, which provokes cinematic alterations that might result in chronic pain. Several surgical strategies for the management of patients with chronic and symptomatic acromioclavicular joint instability have been described. The range of possibilities includes anatomical and non-anatomical techniques, open and arthroscopy-assisted procedures, and biological and synthetic grafts. Surgical management of chronic acromioclavicular joint instability should involve the reconstruction of the torn ligaments because it is accepted that from three weeks after the injury, these structures may lack healing potential. Here, we provide a review of the literature regarding the management of chronic acromioclavicular joint instability. Expert opinion, Level V.

  7. "Anatomical simulation" of the biomechanical behavior of the human mandible.

    Science.gov (United States)

    Kober, Cornelia; Hellmich, Christian; Stübinger, Stefan; Zeilhofer, Hans-Florian; Sader, Robert

    2015-01-01

    The load-carrying behavior of the human mandible can be described using finite element simulation, enabling investigations about physiological and pathological skeletal adaption. "Anatomical simulation" implies a stepwise approximation towards the anatomical reality. The project is structured in three steps. In Step 1, the preprocessing, the simulation model is provided. Step 2 is the numerical computation. Step 3 is dedicated to the interpretation of the results. The requirements of the preprocessing are: a) realization of the organ's individual anatomy, namely its outer shape; b) the tissue's elastic properties, thus its inner consistency; and c) the organ's mechanical loads. For physiological mandibular loading, these are due to muscles, temporomandibular joints, and tooth forces. Meanwhile, the reconstruction of the macroscopic anatomy from computed tomography data is standard. The periodontal ligament is inserted ex post using an approach developed by the authors. The bone is modeled anisotropically and inhomogeneously. By the visualization of the individual fiber course, the muscular force vectors are realized. The mandibular condyle is freely mobile in a kind of simplified joint capsule. For the realization of bite forces, several approaches are available. An extendible software tool is provided, enabling the user - by variable input of muscle and bite forces - to examine the individual patient's biomechanics, eg, the influence of the periodontal ligament, the condition of the temporomandibular joints, atrophic processes, or the biomechanical situation of dental implants. By stepwise approximation towards the anatomical reality, the mandibular simulation will be advanced to a valuable tool for diagnosis and prognosis.

  8. Relação anatômica do nervo supraescapular com o processo coracoide, articulação acromioclavicular e acrômio Anatomical relationship of the suprascapular nerve to the coracoid process, acromio clavicular joint and acromion

    Directory of Open Access Journals (Sweden)

    Bernardo Barcellos Terra

    2010-06-01

    Full Text Available OBJETIVO: Estabelecer a relação anatômica do nervo supraescapular (NSE localizado na fossa supraescapular com a borda medial da base do coracoide, face articular acromial da articulação acromioclavicular e a borda anterolateral do acrômio. MÉTODOS: Foram dissecados 16 ombros de 16 cadáveres, sendo nove masculinos e sete femininos, mensurando com auxílio do paquímetro a distância do nervo supraescapular (na sua passagem sob o ligamento transverso com pontos fixos determinados na borda medial da base do processo coracoide, na face articular do acrômio da articulação acromioclavicular e na borda anterolateral do acrômio, correlacionando com a idade e o sexo. Foram excluídos cadáveres com intervenção cirúrgica prévia. RESULTADOS: Com relação à medida do nervo supraescapular, na sua fossa à borda medial da base do processo coracoide, obtivemos uma média de 3,9cm (variando de 3,1cm a 5,2cm; com relação à articulação acromioclavicular, a média foi de 4,7 (3,9cm a 5,2cm; e, com relação à borda anterolateral do acrômio, a média foi de 6,1cm (5,7cm a 6,8cm. CONCLUSÃO: É fundamental o conhecimento exato da anatomia dos nervos da região anterior do ombro para evitar lesões iatrogênicas e para conseguir resultados satisfatórios no tratamento cirúrgico das doenças do ombro, seja ele realizado de forma aberta ou artroscópica.OBJECTIVE: To establish the anatomic relationship of the suprascapular nerve (SSN located in the suprascapular notch to the medial border of the base of the coracoid process, the medial acromial surface of the acromioclavicular joint and the anterolateral edge of the acromion. METHODS: We dissected 16 shoulders of 16 cadavers, 9 males and 7 females. The distance from the suprascapular nerve (in its course beneath the transverse ligament to certain fixed points in the medial base of the coracoid process was measured with the aid of a caliper, as well as to the articular surface of the acromion

  9. 21 CFR 888.3480 - Knee joint femorotibial metallic constrained cemented prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Knee joint femorotibial metallic constrained... Knee joint femorotibial metallic constrained cemented prosthesis. (a) Identification. A knee joint... knee joint. The device prevents dislocation in more than one anatomic plane and has components that...

  10. Anatomical pathology is dead? Long live anatomical pathology.

    Science.gov (United States)

    Nicholls, John M; Francis, Glenn D

    2011-10-01

    The standard diagnostic instrument used for over 150 years by anatomical pathologists has been the optical microscope and glass slide. The advent of immunohistochemistry in the routine laboratory in the 1980s, followed by in situ hybridisation in the 1990s, has increased the armamentaria available to the diagnostic pathologist, and this technology has led to changed patient management in a limited number of neoplastic diseases. The first decade of the 21 century has seen an increasing number of publications using proteomic technologies that promise to change disease diagnosis and management, the traditional role of an anatomical pathologist. Despite the plethora of publications on proteomics and pathology, to date there are actually limited data where proteomic technologies do appear to be of greater diagnostic value than the standard histological slide. Though proteomic techniques will become more prevalent in the future, it will need the expertise of an anatomical pathologist to dissect out and validate this added information.

  11. Joint ventures

    DEFF Research Database (Denmark)

    Sørensen, Karsten Engsig

    Afhandlingen analysere de konkurrenceretlige og selskabsretlige regler som er bestemmende for hvordan et joint venture samarbejde er struktureret......Afhandlingen analysere de konkurrenceretlige og selskabsretlige regler som er bestemmende for hvordan et joint venture samarbejde er struktureret...

  12. Joint swelling

    Science.gov (United States)

    ... chap 275. Raftery AT, Lim E, Ostor AJK. Joint disorders. In: Raftery AT, Lim E, Ostor AJK, eds. ... A.M. Editorial team. Related MedlinePlus Health Topics Joint Disorders Browse the Encyclopedia A.D.A.M., Inc. ...

  13. Anatomically Correct Surface Recovery

    DEFF Research Database (Denmark)

    Jensen, Rasmus Ramsbøl; Nielsen, Jannik Boll; Larsen, Rasmus

    2015-01-01

    using the learned statistics. A quantitative evaluation is performed on a data set of 10 laser scans of ear canal impressions with minimal noise and artificial holes. We also present a qualitative evaluation on authentic partial scans from an actual direct in ear scanner prototype. Compared to a state......We present a method for 3D surface recovery in partial surface scans. The method is based on an Active Shape Model, which is used to predict missing data. The model is constructed using a bootstrap framework, where an initially small collection of hand-annotated samples is used to fit...... to and register unknown samples, resulting in an extensive statistical model. The statistical recovery uses a multivariate point prediction, where the distribution of the points is given by the Active Shape Model. We show how missing data in a partial scan, once point correspondence is achieved, can be predicted...

  14. Joint ventures

    NARCIS (Netherlands)

    M.N. Hoogendoorn (Martin)

    2009-01-01

    textabstractEen veel voorkomende wijze van samenwerking tussen ondernemingen is het uitvoeren van activiteiten in de vorm van een joint venture. Een joint venture is bijna altijd een afzonderlijke juridische entiteit. De partners in de joint venture voeren gezamenlijk de zeggenschap uit. In internat

  15. Joint ventures

    NARCIS (Netherlands)

    M.N. Hoogendoorn (Martin)

    2009-01-01

    textabstractEen veel voorkomende wijze van samenwerking tussen ondernemingen is het uitvoeren van activiteiten in de vorm van een joint venture. Een joint venture is bijna altijd een afzonderlijke juridische entiteit. De partners in de joint venture voeren gezamenlijk de zeggenschap uit. In internat

  16. MR assessment of distribution and amount of joint effusion in patients with traumatic knee joint disorders

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Mi Gyoung; Yang, Ik; Lee, Kyung Won; Lee, Yul; Chung, Soo Young; Lee, Kwan Seop; Yoo, Jung Han [Hallym Univ. College of Medicine, Chunchon (Korea, Republic of)

    1999-06-01

    To clarify the distribution of joint effusion, and the relationship between type of injury and amount of joint effusion seen in traumatic knee joint magnetic resonance imaging (MRI). We retrospectively reviewed the MR images of 400 patients with traumatic knee joint effusion. The knee joint space was divided into four compartments : central portion (para-ACL, para-PCL), suprapatellar pouch, posterior femoral recess, and subpopliteal recess, and we then compared the amount and distribution of effusion. For statistical analysis, the chi-square test was used. Among 400 MRI examinations of joint effusion, 383 knees (96%) showed homogeneous low intensity on T1-weighted images, and - except for ten cases of fluid-fluid levels- homogeneous high intensity on T2-weighted images. Knee joint effusion was clearly shown to be distributed mainly in the suprapatellar pouch (345, 86%), followed by the central posterior femoral recess, and the subpopliteal recess (P<0.001). Extensive joint effusion was less frequently found in the normal group, but was occasionally found in the combined injury group (P<0.001). The relationship between amount of joint effusion and type of injury was statistically significant (P<0.001), except in the case of medial and lateral collateral ligament injury. The distribution of joint effusion in patients with traumatic knee disorders is a reflection of anatomic communication, and whether the amount of joint effusion was small or large depended on the anatomical location and type of injury.

  17. [ANATOMICAL PREPARATIONS IN MUSEUMS A SPECIAL CATEGORY OF CULTURAL HERITAGE].

    Science.gov (United States)

    Monza, Francesca; Licata, Marta

    2015-01-01

    The international debate on the issue of human remains in museums and on the ethical issues related to their exhibition stimulates reflection on the Italian anatomical collections and on their preparations. A definition of human remains or of anatomical preparation does not exist in the Italian legislation. The anatomical specimens in museums are protected by the laws of Cultural Heritage as part of public collections, but their status is not well defined. By their nature of human material they would in fact be considered as a special category of Cultural Heritage. Because they are part of a cadaver they can be regarded as res nullius, but since treated with special techniques they could also change their meaning and being considered a species nova. Finally, it reflects on the possibility of creating a museum in Italy composed by new anatomical preparations. The article outline the contours of a museological issue that deserves to be investigated in order to better identify the anatomical preparations and their management in museums.

  18. Multiple variations of the tendons of the anatomical snuffbox

    Science.gov (United States)

    Thwin, San San; Zaini, Fazlin; Than, Myo

    2014-01-01

    INTRODUCTION Multiple tendons of the abductor pollicis longus (APL) in the anatomical snuffbox of the wrist can lead to the development of de Quervain's syndrome, which is caused by stenosing tenosynovitis. A cadaveric study was performed to establish the variations present in the tendons of the anatomical snuffbox in a Malaysian population, in the hope that this knowledge would aid clinical investigation and surgical treatment of de Quervain's tenosynovitis. METHODS Routine dissection of ten upper limbs was performed to determine the variations in the tendons of the anatomical snuffbox of the wrist. RESULTS In all the dissected upper limbs, the APL tendon of the first extensor compartment was found to have several (3–14) tendon slips. The insertion of the APL tendon slips in all upper limbs were at the base of the first metacarpal bone, trapezium and fascia of the opponens pollicis muscle; however, in seven specimens, they were also found to be attached to the fleshy belly of the abductor pollicis brevis muscle. In two specimens, double tendons of the extensor pollicis longus located in the third extensor compartment were inserted into the capsule of the proximal interphalangeal joints before being joined to the extensor expansion. In two other specimens, the first extensor compartment had two osseofibrous tunnels divided by a septum that separated the APL tendon from the extensor pollicis brevis tendon. CONCLUSION Multiple variations were found in the anatomical snuffbox region of the dissected upper limbs. Knowledge of these variations would be useful in interventional radiology and orthopaedic surgery. PMID:24452976

  19. Fiscal 1999 report on basic research for promotion of joint implementation programs. Research on collection and utilization of coal mine methane gas in Russia (Kuznetsk coal field); Russia (Kuznetsk tanden) ni okeru tanko methane gas kaishu riyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The above-mentioned effort is to comply with the COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change) joint implementation clause. At this coal field, mining facilities are growing superannuated and obsolescent in the prolonged business depression, causing frequent occurrence of disasters such as gas explosions. The coal mine gas collection rate at the Kuznetsk coal field is as low as 17%, with concern for safety discouraging sufficient collection. Even the small amount of the collected gas is, in the absence of gas utilizing facilities, totally discharged into the air. For the mitigation of global warming, for mining safety, and for the establishment of a foundation for business, it is desired that coal mine methane gas collection/utilization facilities and related technologies be introduced into the coal field. Gas purging from the pits is incomplete, which is attributed to the lack of equipment capable of excavating proper-diameter bores longer than 100m for longwall mining. Ventilation also needs improvement. The research is under way on the premise that highly reliable intermediate range (300m) boring equipment and gas management technologies will be available. Collection of gas of a 30-35% concentration level at a collection rate of 40% is the target. (NEDO)

  20. Anatomic variance of the iliopsoas tendon.

    Science.gov (United States)

    Philippon, Marc J; Devitt, Brian M; Campbell, Kevin J; Michalski, Max P; Espinoza, Chris; Wijdicks, Coen A; Laprade, Robert F

    2014-04-01

    The iliopsoas tendon has been implicated as a generator of hip pain and a cause of labral injury due to impingement. Arthroscopic release of the iliopsoas tendon has become a preferred treatment for internal snapping hips. Traditionally, the iliopsoas tendon has been considered the conjoint tendon of the psoas major and iliacus muscles, although anatomic variance has been reported. The iliopsoas tendon consists of 2 discrete tendons in the majority of cases, arising from both the psoas major and iliacus muscles. Descriptive laboratory study. Fifty-three nonmatched, fresh-frozen, cadaveric hemipelvis specimens (average age, 62 years; range, 47-70 years; 29 male and 24 female) were used in this study. The iliopsoas muscle was exposed via a Smith-Petersen approach. A transverse incision across the entire iliopsoas musculotendinous unit was made at the level of the hip joint. Each distinctly identifiable tendon was recorded, and the distance from the lesser trochanter was recorded. The prevalence of a single-, double-, and triple-banded iliopsoas tendon was 28.3%, 64.2%, and 7.5%, respectively. The psoas major tendon was consistently the most medial tendinous structure, and the primary iliacus tendon was found immediately lateral to the psoas major tendon within the belly of the iliacus muscle. When present, an accessory iliacus tendon was located adjacent to the primary iliacus tendon, lateral to the primary iliacus tendon. Once considered a rare anatomic variant, the finding of ≥2 distinct tendinous components to the iliacus and psoas major muscle groups is an important discovery. It is essential to be cognizant of the possibility that more than 1 tendon may exist to ensure complete release during endoscopy. Arthroscopic release of the iliopsoas tendon is a well-accepted surgical treatment for iliopsoas impingement. The most widely used site for tendon release is at the level of the anterior hip joint. The findings of this novel cadaveric anatomy study suggest that

  1. A multi-segment foot model based on anatomically registered technical coordinate systems: method repeatability in pediatric feet.

    Science.gov (United States)

    Saraswat, Prabhav; MacWilliams, Bruce A; Davis, Roy B

    2012-04-01

    Several multi-segment foot models to measure the motion of intrinsic joints of the foot have been reported. Use of these models in clinical decision making is limited due to lack of rigorous validation including inter-clinician, and inter-lab variability measures. A model with thoroughly quantified variability may significantly improve the confidence in the results of such foot models. This study proposes a new clinical foot model with the underlying strategy of using separate anatomic and technical marker configurations and coordinate systems. Anatomical landmark and coordinate system identification is determined during a static subject calibration. Technical markers are located at optimal sites for dynamic motion tracking. The model is comprised of the tibia and three foot segments (hindfoot, forefoot and hallux) and inter-segmental joint angles are computed in three planes. Data collection was carried out on pediatric subjects at two sites (Site 1: n=10 subjects by two clinicians and Site 2: five subjects by one clinician). A plaster mold method was used to quantify static intra-clinician and inter-clinician marker placement variability by allowing direct comparisons of marker data between sessions for each subject. Intra-clinician and inter-clinician joint angle variability were less than 4°. For dynamic walking kinematics, intra-clinician, inter-clinician and inter-laboratory variability were less than 6° for the ankle and forefoot, but slightly higher for the hallux. Inter-trial variability accounted for 2-4° of the total dynamic variability. Results indicate the proposed foot model reduces the effects of marker placement variability on computed foot kinematics during walking compared to similar measures in previous models.

  2. OIG targets contractual joint ventures.

    Science.gov (United States)

    O'Hare, Patrick K

    2003-09-01

    A recent OIG Special Advisory Bulletin raises questions for providers involved in joint ventures. The Bulletin describes several characteristics that the OIG views as potentially suspect, including a referral stream controlled by the provider initiating the joint venture and the use of a wholly owned subsidiary of the provider to bill and collect for services. According to the OIG, profits paid by the subsidiary to the provider owner in such "suspect contractual joint ventures" could constitute illegal remuneration for referrals.

  3. Quantitative Methods for Analysing Joint Questionnaire Data: Exploring the Role of Joint in Force Design

    Science.gov (United States)

    2015-08-01

    UNCLASSIFIED UNCLASSIFIED Quantitative Methods for Analysing Joint Questionnaire Data: Exploring the Role of Joint in Force Design David...joint activities selected by respondents, and the small sample size, quantitative analysis was conducted on the collected data. This statistical...APPROVED FOR PUBLIC RELEASE UNCLASSIFIED UNCLASSIFIED Quantitative Methods for Analysing Joint Questionnaire Data: Exploring the Role of

  4. Anatomical structure of Polystichum Roth ferns rachises

    Directory of Open Access Journals (Sweden)

    Oksana V. Tyshchenko

    2012-03-01

    Full Text Available The morpho-anatomical characteristics of rachis cross sections of five Polystichum species is presented. The main and auxiliary anatomical features which help to distinguish investigated species are revealed.

  5. Anatomic study of infrapopliteal vessels.

    Science.gov (United States)

    Lappas, D; Stavropoulos, N A; Noussios, G; Sakellariou, V; Skandalakis, P

    2012-08-01

    The purpose of this project is to study and analyse the anatomical variations of the infrapopliteal vessels concerning their branching pattern. A reliable sample of one hundred formalin-fixed adult cadavers was dissected by the Anatomical Laboratory of Athens University. The variations can be classified in the following way: the normal branching of the popliteal artery was present in 90%. The remainder revealed variant branching patterns: hypoplastic or aplastic posterior tibial artery and the pedis arteries arising from the peroneal (3%); hypoplastic or aplastic anterior tibial artery (1.5%); and the dorsalis pedis formed by two equal branches, arising from the peroneal and the anterior tibial artery (2%). The variations were more frequent in females and in short-height individuals. Knowledge of these variations is rather important for any invasive technic concerning lower extremities.

  6. Ceramic joints

    Science.gov (United States)

    Miller, Bradley J.; Patten, Jr., Donald O.

    1991-01-01

    Butt joints between materials having different coefficients of thermal expansion are prepared having a reduced probability of failure of stress facture. This is accomplished by narrowing/tapering the material having the lower coefficient of thermal expansion in a direction away from the joint interface and not joining the narrow-tapered surface to the material having the higher coefficient of thermal expansion.

  7. Finite element study on the anatomic transtibial technique for single-bundle anterior cruciate ligament reconstruction.

    Science.gov (United States)

    Bae, Ji Yong; Kim, Geon-Hee; Seon, Jong Keun; Jeon, Insu

    2016-05-01

    The anatomic transtibial (TT) technique is proposed as a new approach for single-bundle anterior cruciate ligament (ACL) reconstruction. Geometric models of the anatomic TT and anteromedial (AM) portal techniques were fabricated with a reconstructed knee joint model and virtual surgical operations. Grafts of 7 mm diameter were modeled and inserted into tunnels drilled in each model. In the models, the shape of the graft between the femur and the tibia, the lengths of the bone tunnels, and the femoral graft bending angles were evaluated. To evaluate the biomechanical effects of both techniques on the grafts, the contact pressures and maximum principal stresses in the grafts were calculated using the finite element method. The anatomic TT technique placed the femoral tunnel to the anatomic position of the native ACL femoral attachment site. In addition, it decreased the peak contact pressure and the maximum principal stress at the full extension position of the graft compared with the AM portal technique. The anatomic TT technique may be regarded as a superior surgical technique compared with the conventional TT and AM portal techniques. Because of the easy surgical operation involved, the technique decreases the operation time for ACL reconstruction and it provides a deformation behavior of grafts similar to that in the native ACL in a knee joint. With its few side effects, the anatomic TT technique may considerably help patients.

  8. PET Image Reconstruction Using Information Theoretic Anatomical Priors

    Science.gov (United States)

    Somayajula, Sangeetha; Panagiotou, Christos; Rangarajan, Anand; Li, Quanzheng; Arridge, Simon R.

    2011-01-01

    We describe a nonparametric framework for incorporating information from co-registered anatomical images into positron emission tomographic (PET) image reconstruction through priors based on information theoretic similarity measures. We compare and evaluate the use of mutual information (MI) and joint entropy (JE) between feature vectors extracted from the anatomical and PET images as priors in PET reconstruction. Scale-space theory provides a framework for the analysis of images at different levels of detail, and we use this approach to define feature vectors that emphasize prominent boundaries in the anatomical and functional images, and attach less importance to detail and noise that is less likely to be correlated in the two images. Through simulations that model the best case scenario of perfect agreement between the anatomical and functional images, and a more realistic situation with a real magnetic resonance image and a PET phantom that has partial volumes and a smooth variation of intensities, we evaluate the performance of MI and JE based priors in comparison to a Gaussian quadratic prior, which does not use any anatomical information. We also apply this method to clinical brain scan data using F18 Fallypride, a tracer that binds to dopamine receptors and therefore localizes mainly in the striatum. We present an efficient method of computing these priors and their derivatives based on fast Fourier transforms that reduce the complexity of their convolution-like expressions. Our results indicate that while sensitive to initialization and choice of hyperparameters, information theoretic priors can reconstruct images with higher contrast and superior quantitation than quadratic priors. PMID:20851790

  9. Imaging Approach to Temporomandibular Joint Disorders.

    Science.gov (United States)

    Morales, H; Cornelius, R

    2016-03-01

    Internal derangement is the most common temporomandibular joint disorder. Degenerative osteoarthritis and trauma are next in frequency. Less common pathology includes rheumatoid arthritis, synovial chondromatosis, calcium pyrophosphate dehydrate deposition disease, pigmented villonodular synovitis, tumors, infection, and osteonecrosis. We provide a systematic approach to facilitate interpretation based on major anatomic structures: disc-attachments, joint space, condyle, and lateral pterygoid muscle. Relevant graphic anatomy and state of the art imaging are discussed in correlation with current clinical and therapeutic highlights of pathologic entities affecting the joint.

  10. Shoulder acromioclavicular joint reconstruction options and outcomes.

    Science.gov (United States)

    Lee, Simon; Bedi, Asheesh

    2016-12-01

    Acromioclavicular joint separations are a common cause of shoulder pain in the young athletic population. In high-grade injuries, acromioclavicular joint reconstruction procedures may be indicated for functional improvement. There is currently no gold standard for the surgical management of these injuries. Multiple reconstructive options exist, including coracoclavicular screws, hook plates, endobutton coracoclavicular fixations, and anatomic ligament reconstructions with tendon grafts. This article aims to review pertinent acromioclavicular joint anatomy and biomechanics, radiographic evaluation, classification system, as well as reconstruction options, outcomes, and complications.

  11. Temporomandibular Joint, Closed

    Science.gov (United States)

    ... Gallery > Oral Health > The Temporomandibular Joint, Closed The Temporomandibular Joint, Closed Main Content Title: The Temporomandibular Joint, Closed Description: The temporomandibular joint connects the lower ...

  12. Focal anatomic resurfacing implantation for bilateral humeral and femoral heads’ avascular necrosis in a patient with Hodgkin’s lymphoma and literature review

    Directory of Open Access Journals (Sweden)

    Onur Bilge

    2015-01-01

    Conclusion: This study is the first report to present the three-years’ clinical result of a single, relevant case, who was treated with sequential focal anatomic resurfacing implantations (HemiCAP® in four aforementioned joints.

  13. Direct sagital computed tomography of the temporomandibular joint

    Energy Technology Data Exchange (ETDEWEB)

    Manzione, J.V. (Harvard Medical School, Boston, MA); Seltzer, S.E.; Katzberg, R.W.; Hammerschlag, S.B.; Chiango, B.F.

    1983-01-01

    Temporomandibular joint dysfunction is a common clinical problem that has been reported to affect 4%-28% of adults. Temporomandibular joint arthrography has shown that many of these patients have intraarticular abnormalities involving the meniscus. A noninvasive test that could demonstrate the meniscus as well as bony abnormalities of the joint would be an important advance. In an attempt to develop such a noninvasive test, we have performed direct sagittal computed tomography (CT) on cadaver temporomandibular joints and have correlated the images with anatomic sections. We are currently applying this technique clinically and report one representative example in which direct sagittal computed tomography of the temporomandibular joint accurately demonstrated an anteriorly displaced meniscus.

  14. MR-anatomy of infants hip: comparison to anatomical preparations.

    Science.gov (United States)

    Krasny, R; Prescher, A; Botschek, A; Lemke, R; Casser, H R; Adam, G

    1991-01-01

    The correlation between anatomical preparations and MRI images of the most important structures of newborn hips in coronal and axial orientation was performed in 18 post mortem babies. T1-weighted images present a good differentiation between cartilage, bone, ligaments and surrounding soft tissues. Coronal images give the best opportunity to study the clinically important structures of the roof of acetabulum including the labrum and the ground of the acetabulum. The latter is shown in a more detailed way by MRI than by sonography. Axial images allow additional examinations of the ventral and dorsal parts of the joint. By using both coronal and axial images the exact determination of the centering of the femur head in the hip joint is possible.

  15. Joint audits - benefit or burden?

    DEFF Research Database (Denmark)

    Holm, Claus; Thinggaard, Frank

    In this paper we examine whether there are perceived and observed benefits or burdens from using two audit firms instead of one. In 2005 the mandatory joint audit requirement was abolished in Denmark. This provides a unique setting for studying the consequences and implications of going from...... a joint audit regime to a single auditor/voluntary joint audit regime. The dataset used in this paper has been collected for the full population of non-financial Danish companies listed on the Copenhagen Stock Exchange (CSE) in the years 2004 and 2005. We find that a majority of firms perceive joint...

  16. Utilization management in anatomic pathology.

    Science.gov (United States)

    Lewandrowski, Kent; Black-Schaffer, Steven

    2014-01-01

    There is relatively little published literature concerning utilization management in anatomic pathology. Nonetheless there are many utilization management opportunities that currently exist and are well recognized. Some of these impact only the cost structure within the pathology department itself whereas others reduce charges for third party payers. Utilization management may result in medical legal liabilities for breaching the standard of care. For this reason it will be important for pathology professional societies to develop national utilization guidelines to assist individual practices in implementing a medically sound approach to utilization management.

  17. Joint pain

    Science.gov (United States)

    ... or conditions. It may be linked to arthritis , bursitis , and muscle pain . No matter what causes it, ... Autoimmune diseases such as rheumatoid arthritis and lupus Bursitis Chondromalacia patellae Crystals in the joint: Gout (especially ...

  18. Coronoid process of the ulna: paleopathologic and anatomic study with imaging correlation. Emphasis on the anteromedial ''facet''

    Energy Technology Data Exchange (ETDEWEB)

    Freitas Valle de Lemos Weber, Marcio [University of California, Department of Radiology, Veterans Affairs Medical Center, San Diego, CA (United States); Santa Maria, Rio Grande do Sul (Brazil); Barbosa, Diogo Miranda; Belentani, Clarissa; Negrao Ramos, Pedro Miguel; Trudell, Debra; Resnick, Donald [University of California, Department of Radiology, Veterans Affairs Medical Center, San Diego, CA (United States)

    2009-01-15

    The purpose of this study was to provide a detailed description of the anatomy of the coronoid process of the ulna and to use magnetic resonance (MR) images and anatomic correlation with cadavers to show the macroscopic configuration of this structure. Photography and high-resolution radiography were performed in 26 ulna specimens from the collection of a local museum. MR imaging of the coronoid process of 11 cadaveric elbows was performed. The images were compared with those seen on anatomic sectioning. The anteromedial rim of the coronoid process of the ulna had a regular surface, without osseous irregularities or facets in 69.2% of the specimens. In 30.8% of the specimens, the anteromedial rim was not regular and a small ridge could be identified. The insertion site of the joint capsule was onto the anterior aspect of the coronoid process, at an average distance of 5.9 mm distal to the tip. The attachment of the anterior band of the ulnar collateral ligament at the sublime tubercle was flush with the articular margin in 63.6% of the specimens. In 36.4% of the specimens, a more distal attachment, with a separation between the undersurface of the ligament and the adjacent tubercle, was seen. The brachialis tendon was attached to the coronoid process at a mean distance of 12.1 mm distal to the tip. The coronoid process of the ulna is a small osseous structure with a complex anatomy and presents some anatomical variations. (orig.)

  19. 47 CFR 76.912 - Joint certification.

    Science.gov (United States)

    2010-10-01

    ... CABLE TELEVISION SERVICE Cable Rate Regulation § 76.912 Joint certification. (a) Franchising authorities..., joint hearings, data collection, and ratemaking. Franchising authorities jointly certified to regulate their cable system(s) may make independent rate decisions. (b) Franchising authorities may apply...

  20. Anatomical Knee Variants in Discoid Lateral Meniscal Tears

    Science.gov (United States)

    Chen, Xu-Xu; Li, Jian; Wang, Tao; Zhao, Yang; Kang, Hui

    2017-01-01

    Background: Discoid lateral meniscus was a common meniscal dysplasia and was predisposed to tear. There were some anatomical knee variants in patients with discoid lateral meniscus. The aim of this study was to analyze the relationship between anatomical knee variants and discoid lateral meniscal tears. Methods: There were totally 125 cases of discoid lateral meniscus enrolled in this study from February 2008 to December 2013. Eighty-seven patients who underwent arthroscopic surgery for right torn discoid lateral meniscus were enrolled in the torn group. An additional 38 patients who were incidentally identified as having intact discoid lateral menisci on magnetic resonance imaging (MRI) findings were included in the control group. All patients were evaluated for anatomical knee variants on plain radiographs, including lateral joint space distance, height of the lateral tibial spine, height of the fibular head, obliquity of the lateral tibial plateau, squaring of the lateral femoral condyle, cupping of the lateral tibial plateau, lateral femoral condylar notch, and condylar cutoff sign. The relationship between anatomical variants and meniscal tear was evaluated. These anatomical variants in cases with complete discoid meniscus were also compared with those in cases with incomplete discoid meniscus. Results: There were no significant differences between the two groups in lateral joint space distance (P = 0.528), height of the lateral tibial spine (P = 0.927), height of the fibular head (P = 0.684), obliquity of the lateral tibial plateau (P = 0.672), and the positive rates of squaring of the lateral femoral condyle (P = 0.665), cupping of the lateral tibial plateau (P = 0.239), and lateral femoral condylar notch (P = 0.624). The condylar cutoff sign was significantly different between the two groups, with the prominence ratio in the torn group being smaller than that in the control group (0.74 ± 0.11 vs. 0.81 ± 0.04, P = 0.049). With the decision value of the

  1. Quantification of anatomical variation at the atlanto-occipital articulation: morphometric resolution of commingled human remains within the repatriation documentation process.

    Science.gov (United States)

    Dudar, J Christopher; Castillo, Eric R

    2016-12-15

    Within many institutional collections are skeletal and mummified human remains representing a part of our species' adaptation and evolution to various biocultural environments. Archaeologically recovered individuals come from deep into our past, and possess information that provides insight into population history, genetics, diet, health and other questions relevant to all living peoples. Academic concerns have been raised regarding the reinterment of these collections due to the rise of the international repatriation movement, the passage of various laws and implementation of institutional policies. While all potential research questions cannot be anticipated, the proactive documentation of collections is one way to ensure primary data are maintained for future study. This paper explores developments in digitization technology that allow the archive of virtual copies of human remains, and an example of how anatomical and archaeological collections can be digitized towards pragmatic research goals. The anatomical variability of the human atlanto-occipital (AO) articular surfaces was studied using non-metric categorical shape, 2D measurement and 3D morphometric analyses to provide reference standards for the reassociation of individuals from commingled skeletal remains, such as found in some archaeological sites or forensic investigations including mass grave or mass disaster recovery scenes. Results suggest that qualitative shape observations and caliper-derived measurements of the articulating AO condyles tend to display significant sexual dimorphism and biological ancestry-related size and shape differences. Variables derived from a scanned 3D mesh, such as condylar angle and articular surface curvature, quantify biomechanical variation and display a stronger congruency within individuals. It is recommended that a two-stage approach involving initial screening and identification of possible reassociation candidates is accomplished with a linear osteometric

  2. Dual joint space arthrography in temporomandibular joint disorders: Comparison with single inferior joint space arthrography

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Hyung Sik; Chang, Duk Soo; Lee, Kyung Soo; Kim, Woo Sun; Sung, Jung Ho; Jun, Young Hwan [Capital Armed Forces General Hospital, Seoul (Korea, Republic of)

    1989-02-15

    The temporomandibular joint(TMJ) is really a complex of two synovial space separated by fibrocartilaginous disc. Single inferior joint space arthrography is commonly performed for evaluation of TMJ disorders, which is known to be superior in demonstrating joint dynamics. But it reveals only the inferior surface of the disc. Therefore, dual space arthrography is superior to demonstrate the soft tissue anatomic feature of the joint such as disc position and shape. Authors performed 83 TMJ arthrograms in TMJ problems. Initially, the inferior joint space was done and then the superior space was sequentially contrasted. The follow results were noted: 1. In all cases, dual space arthrography revealed accurate disc shape and positions. 2. Concordant findings between the two techniques: 68 cases (82%). Discordance between the two techniques: 15 cases (18%) 3. Possible causes of discordance between inferior and dual space arthrography. a) Normal varians of anterior recess: 3 cases b) Posterior disc displacement: 4 cases c) Influence of the patient's head position change :4 cases d) False perforation: 2 cases e) Reduction change: 2 cases 4. In 5 cases with anterior displacement, dual space arthrography gave additional findings such as adhesion within the superior space, which could not be evaluated by single inferior space.

  3. Network models in anatomical systems.

    Science.gov (United States)

    Esteve-Altava, Borja; Marugán-Lobón, Jesús; Botella, Héctor; Rasskin-Gutman, Diego

    2011-01-01

    Network theory has been extensively used to model the underlying structure of biological processes. From genetics to ecology, network thinking is changing our understanding of complex systems, specifically how their internal structure determines their overall behavior. Concepts such as hubs, scale-free or small-world networks, common in the complexity literature, are now used more and more in sociology, neurosciences, as well as other anthropological fields. Even though the use of network models is nowadays so widely applied, few attempts have been carried out to enrich our understanding in the classical morphological sciences such as in comparative anatomy or physical anthropology. The purpose of this article is to introduce the usage of network tools in morphology; specifically by building anatomical networks, dealing with the most common analyses and problems, and interpreting their outcome.

  4. Anatomical assessment of congenital heart disease.

    Science.gov (United States)

    Wood, John C

    2006-01-01

    Cardiac MRI (CMR) is replacing diagnostic cardiac catheterization as the modality of choice for anatomic and functional characterization of congenital heart disease (CHD) when echocardiographic imaging is insufficient. In this manuscript, we discuss the principles of anatomic imaging of CHD, placing emphasis on the appropriate choice and modification of pulse sequences necessary to evaluate infants and small children. Clinical examples are provided to illustrate the relative strengths and shortcomings of different CMR imaging techniques. Although cardiovascular function and flow techniques are not described, their role in evaluating the severity of anatomic defects is emphasized. Anatomic characterization represents the first component of a carefully-planned, integrated CMR assessment of CHD.

  5. Management of acromioclavicular joint injuries.

    Science.gov (United States)

    Li, Xinning; Ma, Richard; Bedi, Asheesh; Dines, David M; Altchek, David W; Dines, Joshua S

    2014-01-01

    Acromioclavicular joint injuries are among the most common shoulder girdle injuries in athletes and most commonly result from a direct force to the acromion with the arm in an adducted position. Acromioclavicular joint injuries often present with associated injuries to the glenohumeral joint, including an increased incidence of superior labrum anterior posterior (SLAP) tears that may warrant further evaluation and treatment. Anteroposterior stability of the acromioclavicular joint is conferred by the capsule and acromioclavicular ligaments, of which the posterior and superior ligaments are the strongest. Superior-inferior stability is maintained by the coracoclavicular (conoid and trapezoid) ligaments. Type-I or type-II acromioclavicular joint injuries have been treated with sling immobilization, early shoulder motion, and physical therapy, with favorable outcomes. Return to activity can occur when normal shoulder motion and strength are obtained and the shoulder is asymptomatic as compared with the contralateral normal extremity. The management of type-III injuries remains controversial and is individualized. While a return to the previous level of functional activity with nonsurgical treatment has been documented in a number of case series, surgical reduction and coracoclavicular ligament reconstruction has been associated with a favorable outcome and can be considered in patients who place high functional demands on their shoulders or in athletes who participate in overhead sports. Surgical management is indicated for high-grade (≥type IV) acromioclavicular joint injuries to achieve anatomic reduction of the acromioclavicular joint, reconstruction of the coracoclavicular ligaments, and repair of the deltotrapezial fascia. Outcomes after surgical reconstruction of the coracoclavicular ligaments have been satisfactory with regard to achieving pain relief and return to functional activities, but further improvements in the biomechanical strength of these

  6. The anconeus, an active lateral ligament of the elbow: new anatomical arguments.

    Science.gov (United States)

    Molinier, François; Laffosse, Jean-Michel; Bouali, Ourdia; Tricoire, Jean-Louis; Moscovici, Jacques

    2011-09-01

    As there are a few detailed anatomical studies of the active function of anconeus muscle in stabilizing the elbow, we aimed to look for anatomical features confirming its role as an active stabilizer of the humero-ulnar joint. Thirty fresh unembalmed elbows from 15 cadavers were dissected. We examined the anatomy, insertions, relationships and orientation of the muscle fibres of the anconeus. The anconeus lies in a separate compartment from the other forearm muscles, but in continuity with the extensor (triceps) compartment of the arm. In all the cases, at its proximal extremity we observed continuity of muscle and tendon with the vastus lateralis of the triceps brachii. The muscle fibres run downward and backward, parallel to the fibres of vastus lateralis of the triceps, when the elbow is in extension. Its deep aspect adheres closely to the lateral joint capsule of the humero-ulnar joint. The new anatomical characteristics of the anconeus revealed in this study make this muscle a digastric head of triceps brachii that coapts the ulna to the humerus and so reduces varus instability. The close relationships between triceps brachii and the anconeus on one hand and between the joint capsule and the anconeus on the other make the latter muscle an active lateral stabilizer of the elbow.

  7. [External femorotibial transfixation in femoral fracture with joint involvement in a child].

    Science.gov (United States)

    Nounla, J; Bennek, J; Bühligen, U; Rolle, U

    2001-07-01

    Long bone fractures combined with joint injuries run a high risk of destabilising the articulations. Remaining joints incongruence can lead to early arthosis especially in cases of severe injuries or not achieved anatomical reduction. A number of osteosynthesis methods are available for anatomical repair of the articular facet. This report presents a seven years old boy with an open comminuted fracture of the distal femur and consecutive joint instability, treated with a Transfixation (Orthofix) of the knee joint. The functional results suggest this method as an alternative treatment.

  8. Joint purpose?

    DEFF Research Database (Denmark)

    Pristed Nielsen, Helene

    2013-01-01

    Starting from Crenshaw´s point that antiracism often fails to interrogate patriarchy and that feminism often reproduces racist practices (1991: 1252), this paper asks: What are the theoretical reasons for believing that feminism and anti-racism can be regarded as fighting for the joint purpose of...

  9. Anatomical models and wax Venuses: art masterpieces or scientific craft works?

    Science.gov (United States)

    Ballestriero, R

    2010-02-01

    The art of wax modelling has an ancient origin but rose to prominence in 14th century Italy with the cult of votive artefacts. With the advent of Neoclassicism this art, now deemed repulsive, continued to survive in a scientific environment, where it flourished in the study of normal and pathological anatomy, obstetrics, zoology and botany. The achievement of having originated the creation of anatomical models in coloured wax must be ascribed to a joint effort undertaken by the Sicilian wax modeller Gaetano Giulio Zumbo and the French surgeon Guillaume Desnoues in the late 17th century. Interest in anatomical wax models spread throughout Europe during the 18th century, first in Bologna with Ercole Lelli, Giovanni Manzolini and Anna Morandi, and then in Florence with Felice Fontana and Clemente Susini. In England, the art of anatomical ceroplastics was brought to London from Florence by the sculptor Joseph Towne. Throughout the centuries many anatomical artists preferred this material due to the remarkable mimetic likeness obtained, far surpassing any other material. Independent of the material used, whether wood, wax or clay, anatomical models were always considered merely craft works confined to hospitals or faculties of medicine and have survived to this day only because of their scientific interest. Italian and English waxes are stylistically different but the remarkable results obtained by Susini and Towne, and the fact that some contemporary artists are again representing anatomical wax bodies in their works, makes the border that formerly separated art and craft indistinguishable.

  10. Joint audits - benefit or burden?

    DEFF Research Database (Denmark)

    Holm, Claus; Thinggaard, Frank

    In this paper we examine whether there are perceived and observed benefits or burdens from using two audit firms instead of one. In 2005 the mandatory joint audit requirement was abolished in Denmark. This provides a unique setting for studying the consequences and implications of going from...... a joint audit regime to a single auditor/voluntary joint audit regime. The dataset used in this paper has been collected for the full population of non-financial Danish companies listed on the Copenhagen Stock Exchange (CSE) in the years 2004 and 2005. We find that a majority of firms perceive joint...... audits to be a net burden. Furthermore, based on DeAngelo's (1981) initial audit pricing model and legislators' claim that joint audits are an unnecessary economic burden to the companies we predict and find discounts (of around 25%) in audit fees in companies that change to single audits. The primary...

  11. Research report for fiscal 1998 on the basic research on the promotion of joint implementation and so forth. Coalbed methane collection and utilization project in China; 1998 nendo Chugoku ni okeru tanko methane gas kaishu riyo project chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    China is surveyed for promotion of joint implementation, which is one of the flexibility measures in the Kyoto Protocol, the Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change. The project aims to collect methane for global warming suppression and to use it as town gas and for power generation as well. The survey covers the 2 coalfields of Yangquan and Panjiang. The Yangquan coalfield is the largest anthracite yielding base in China, with 6 mines in operation. Power generation centering on a 100MW plant is discussed, and generation fired by a mixture of debris out of the coal preparation facility and gas is compared with another fired by town gas, on the assumption that 130-million m{sup 3} is available under the current circumstances. In the case of the Panjiang coalfield, which is expected to develop into a large coal base in the southern part of China, power generation centering on a 50MW plant fired by a mixture of debris and gas is discussed, on the assumption that 63-million m{sup 3} is collectable from the existing 5 mines. Use of town gas is also studied. When Japan's coalbed methane collection technology is applied, the gas drainage rate will be elevated to 40-35% or higher. It is desired that the use of gas drainage will be further diffused for the prevention of disasters of coal mine gas explosion. It is hoped that the use of environmentally friendly energies will be enhanced. (NEDO)

  12. RESULTS FROM THE (1) DATA COLLECTION WORKSHOP, (2) MODELING WORKSHOP AND (3) DRILLING AND CORING METHODS WORKSHOP AS PART OF THE JOINT INDUSTRY PARTICIPATION (JIP) PROJECT TO CHARACTERIZE NATURAL GAS HYDRATES IN THE DEEPWATER GULF OF MEXICO

    Energy Technology Data Exchange (ETDEWEB)

    Stephen A. Holditch; Emrys Jones

    2002-09-01

    In 2000, Chevron began a project to learn how to characterize the natural gas hydrate deposits in the deepwater portions of the Gulf of Mexico. A Joint Industry Participation (JIP) group was formed in 2001, and a project partially funded by the U.S. Department of Energy (DOE) began in October 2001. The primary objective of this project is to develop technology and data to assist in the characterization of naturally occurring gas hydrates in the deepwater Gulf of Mexico. These naturally occurring gas hydrates can cause problems relating to drilling and production of oil and gas, as well as building and operating pipelines. Other objectives of this project are to better understand how natural gas hydrates can affect seafloor stability, to gather data that can be used to study climate change, and to determine how the results of this project can be used to assess if and how gas hydrates act as a trapping mechanism for shallow oil or gas reservoirs. As part of the project, three workshops were held. The first was a data collection workshop, held in Houston during March 14-15, 2002. The purpose of this workshop was to find out what data exist on gas hydrates and to begin making that data available to the JIP. The second and third workshop, on Geoscience and Reservoir Modeling, and Drilling and Coring Methods, respectively, were held simultaneously in Houston during May 9-10, 2002. The Modeling Workshop was conducted to find out what data the various engineers, scientists and geoscientists want the JIP to collect in both the field and the laboratory. The Drilling and Coring workshop was to begin making plans on how we can collect the data required by the project's principal investigators.

  13. Brain Morphometry Using Anatomical Magnetic Resonance Imaging

    Science.gov (United States)

    Bansal, Ravi; Gerber, Andrew J.; Peterson, Bradley S.

    2008-01-01

    The efficacy of anatomical magnetic resonance imaging (MRI) in studying the morphological features of various regions of the brain is described, also providing the steps used in the processing and studying of the images. The ability to correlate these features with several clinical and psychological measures can help in using anatomical MRI to…

  14. Anatomical study of sciatic nerve and common peroneal nerve compression

    Institute of Scientific and Technical Information of China (English)

    Mingzhao Jia; Qing Xia; Jinmin Sun; Qiang Zhou; Weidong Wang

    2008-01-01

    BACKGROUND: Many diseases of the common peroneal nerve are a result of sciatic nerve injury. The present study addresses whether anatomical positioning of the sciatic nerve is responsible for these injuries. OBJECTIVE: To analyze anatomical causes of sciatic nerve and common peroneal nerve injury by studying the relationship between the sciatic nerve and piriformis. DESIGN, TIME AND SETTING: Observe and measure repeatedly. The experiment was conducted in the Department of Anatomy, Tianjin Medical College between January and June 2005. MATERIALS: Fifty-two adult cadavers 33 males and 19 females, with a total of 104 hemispheres, and fixed with formaldehyde, were provided by Tianjin Medical College and Tianjin Medical University. METHODS: A posterior cut was made from the lumbosacral region to the upper leg, fully exposing the piriformis and path of the sciatic nerve. MAIN OUTCOME MEASURES: (1) Anatomical characteristics of the tibial nerve and common peroneal nerve. (2) According to different areas where the sciatic nerve crosses the piriformis, the study was divided into two types--normal and abnormal. Normal is considered to be when the sciatic nerve passes through the infrapiriform foramen. Remaining pathways are considered to be abnormal. (3) Observe the relationship between the suprapiriform foramen, infrapiriform foramen, as well as the superior and inferior space of piriformis. RESULTS: (1) The nerve tract inside the common peroneal nerve is smaller and thinner, with less connective tissue than the tibial nerve. When pathological changes or variations of the piriformis, or over-abduction of the hip joint, occur, injury to the common peroneal nerve often arises due to blockage and compression. (2) A total of 76 hemispheres (73.08%) were normal, 28 were abnormal (26.92%). The piriformis can be injured, and the sciatic nerve can become compressed, when the hip joint undergoes intorsion, extorsion, or abduction. (3) The structures between the infrapiriform and

  15. Anatomy and biomechanics of the elbow joint.

    Science.gov (United States)

    Martin, Silvia; Sanchez, Eugenia

    2013-11-01

    Magnetic resonance (MR) imaging provides clinically useful information in assessing the elbow joint. Superior depiction of muscles, ligaments and tendons as well as the ability to directly visualize nerves, bone marrow and hyaline cartilage, are advantages of MR imaging relative to conventional imaging techniques. As the elbow is located superficially, clinical examination is easier for the orthopedic surgeon and only a few cases need a diagnosis for the radiologist, for this reason the elbow joint is little known for the radiologist. To better understand the injuries that occur in the elbow during the sport activities, we need a better understanding of the biomechanics of the joint. And for understanding the biomechanics, it is necessary to know the exact anatomy of the elbow joint and to be able to identify each anatomic structure in the different imaging planes and pulse sequences. This is especially important in MR as the imaging tool that shows a highest soft tissue resolution among other imaging techniques.

  16. Effect of anatomical and chemical structure in the permeability of "Amapá" wood

    OpenAIRE

    Edy Eime Pereira Baraúna; José Tarcísio Lima; Renato da Silva Vieira; José Reinaldo Moreira da Silva; Thiago Campos Monteiro

    2014-01-01

    This paper aimed to study the permeability to air and liquid, in the longitudinal direction of "amapá" wood (Brosimum parinarioides Ducke), originating from the Amazon Forest. Furthermore, the influence of anatomical and chemical characteristics in the permeability of the wood was investigated. For this study, samples were collected from three trees, in the state of Pará, Brazil, and submitted to permeability test, anatomical characterization, and chemical analyses. The permeability to the ai...

  17. ANATOMICAL COMPARISON OF POPULAR BRACATINGA (Mimosa scabrella Bentham) VARIETIES OF WOOD

    OpenAIRE

    Fernando José Fabrowski; Graciela Inés Bolzon de Muñiz; Maria Cristina M. Mazza; Tomoe Nakashima; Umberto Klock; João Carlos Possamai; Silvana Nisgoski

    2010-01-01

    The main objective of this research was to compare anatomical wood characteristics of the popular varieties of Mimosa scabrella Bentham known as bracatinga-branca, bracatinga-vermelha and bracatinga-argentina. The material  used in this work was collected from 6 to 7 years old trees of the popular varieties from areas located in Colombo municipality, State of Paraná, owned by Embrapa Florestas. Botanic for anatomical characterization of wood material was identified and described. Results did ...

  18. In-vivo dynamic and static three-dimensional joint space distance maps for assessment of cartilage thickness in the radiocarpal joint

    NARCIS (Netherlands)

    Foumani, M.; Strackee, S.D.; Van de Giessen, M.; Jonges, R.; Blankevoort, L.; Streekstra, G.J.

    2013-01-01

    Background The assessment of the joint space thickness is an important clinical parameter for diagnosing osteoarthritis. The accuracy of joint space thickness evaluation from radiographs is limited due to anatomical complexity of the wrist. We propose using distance maps estimated from 3-dimensional

  19. Morphological and anatomical structure of Satureja hortensis L. herb

    Directory of Open Access Journals (Sweden)

    Марія Іванівна Шанайда

    2016-04-01

    Full Text Available Considering the fact that morphological and anatomical characteristic of this or that medicinal herb is rather sufficient for both identification and determination of the quality parameters of herbs, the analysis of diagnostic macroscopic and microscopic features of the unofficial herb of Summer savory (Satureja hortensis L. is relevant direction of pharmaceutical research.Aim of our research was morphological and anatomical study of the Satureja hortensis herb.Methods. Aerial part (herb of Summer savory was collected in 2014-2015 during full bloom period under cultivation in the Western Podillya region. Microscopic analysis of the dried and fixed in ethanol-glycerin-water (1:1:1 mixture herb was carried out according to the conventional methods. Prepared cross-sections and surface samples of stems, leaves and flowers was studied using МS 10 microscope and Sаmsung PL50 camera. Color, shape, surface character of the herbal material constituents were identified at morphological study, as well as their taste and odor.Results. The complex of specific morphological and anatomical diagnostic features of the species, which allow to identify the herb and to avoid impurities of other species during collecting and using of Summer savory herb were determined.Conclusion. The main morphological and anatomical features of stems, leaves and flowers of the unofficial herb of Summer savory (Satureja hortensis were determined. The obtained data will be used for the herbal material standardization and development of the normative documentation “Summer savory herb” as a promising source for herbal substances creation

  20. Decontamination of breast pump milk collection kits and related items at home and in hospital: guidance from a Joint Working Group of the Healthcare Infection Society & Infection Prevention Society*

    Science.gov (United States)

    Price, E; Weaver, G; Hoffman, P; Jones, M; Gilks, J; O’Brien, V; Ridgway, G

    2015-01-01

    Introduction: A variety of methods are in use for decontaminating breast pump milk collection kits and related items associated with infant feeding. This paper aims to provide best practice guidance for decontamination of this equipment at home and in hospital. It has been compiled by a joint Working Group of the Healthcare Infection Society and the Infection Prevention Society. Methods: The guidance has been informed by a search of the literature in Medline, the British Nursing Index, the Cumulative Index to Nursing & Allied Health Literature, Midwifery & Infant Care and the results of two surveys of UK neonatal units in 2002/3 and 2006, and of members of the Infection Prevention Society in 2014. Since limited good quality evidence was available from these sources much of the guidance represents good practice based on the consensus view of the Working Group. Key recommendations: Breast pump milk collection kits should not be reused by different mothers unless they have been sterilized in a Sterile Services Department between these different users. When used by the same mother, a detergent wash followed by thorough rinsing and drying after each use gives acceptable decontamination for most circumstances, as long as it is performed correctly. Additional decontamination precautions to washing, rinsing and drying may be used if indicated by local risk assessments and on advice from the departmental clinicians and Infection Prevention and Control Teams. The microbiological quality of the rinse water is an important consideration, particularly for infants on neonatal units. If bottle brushes or breast/nipple shields are used, they should be for use by one mother only. Decontamination should be by the processes used for breast pump milk collection kits. Dummies (soothers, pacifiers or comforters) needed for non-nutritive sucking by infants on neonatal units, should be for single infant use. Manufacturers should provide these dummies ready-to-use and individually packaged

  1. Anatomic Eponyms in Neuroradiology: Head and Neck.

    Science.gov (United States)

    Bunch, Paul M

    2016-10-01

    In medicine, an eponym is a word-typically referring to an anatomic structure, disease, or syndrome-that is derived from a person's name. Medical eponyms are ubiquitous and numerous. They are also at times controversial. Eponyms reflect medicine's rich and colorful history and can be useful for concisely conveying complex concepts. Familiarity with eponyms facilitates correct usage and accurate communication. In this article, 22 eponyms used to describe anatomic structures of the head and neck are discussed. For each structure, the author first provides a biographical account of the individual for whom the structure is named. An anatomic description and brief discussion of the structure's clinical relevance follow.

  2. Experimental intra-articular calcaneal fractures: anatomic basis for a new classification.

    Science.gov (United States)

    Carr, J B; Hamilton, J J; Bear, L S

    1989-10-01

    Experimental calcaneus fractures were produce by axially loading 18 specimens. Anatomic dissections were performed and documented. Two constant primary fracture lines were identified, dividing the calcaneus in the coronal and sagittal planes. A constant anterolateral fragment was identified, as were three patterns of calcaneocuboid joint fracture involvement. Based on the pathoanatomy and surgical anatomy of the calcaneus, a medial and lateral column classification is proposed. The medial column includes the superomedial fragment. The lateral column includes the calcaneocuboid joint, lateral wall and posterior facet. This concept can help identify fracture displacements and correlate them with a treatment plan.

  3. Reentry confined to the atrioventricular node: electrophysiologic and anatomic findings.

    Science.gov (United States)

    Sheinman, M M; Gonzalez, R; Thomas, A; Ullyot, D; Bharati, S; Lev, M

    1982-05-01

    A patient with recurrent disabling, paroxysmal supraventricular tachycardia refractory to drug treatment underwent electrophysiologic studies. The paroxysmal supraventricular tachycardia was found to be due to atrioventricular (A-V) nodal reentry. The patient died shortly after surgical His bundle section and detailed anatomic studies were performed. These showed fatty infiltration of the approaches to the sinoatrial node, atrial preferential pathways, and A-V node and common bundle. The A-V node was mechanically damaged and the common His bundle was completely severed. These abnormalities were clearly delineated and there was no evidence of an atrio-His bundle bypass tract to an accessory A-V node. Specifically, the central fibrous body and pars membranacea were defined and no atrial muscular fibers pierced these structures to joint the A-V bundle. It is concluded that paroxysmal supraventricular tachycardia due to A-V nodal reentry can be confined to the A-V node.

  4. Bioreactor cultivation of anatomically shaped human bone grafts.

    Science.gov (United States)

    Temple, Joshua P; Yeager, Keith; Bhumiratana, Sarindr; Vunjak-Novakovic, Gordana; Grayson, Warren L

    2014-01-01

    In this chapter, we describe a method for engineering bone grafts in vitro with the specific geometry of the temporomandibular joint (TMJ) condyle. The anatomical geometry of the bone grafts was segmented from computed tomography (CT) scans, converted to G-code, and used to machine decellularized trabecular bone scaffolds into the identical shape of the condyle. These scaffolds were seeded with human bone marrow-derived mesenchymal stem cells (MSCs) using spinner flasks and cultivated for up to 5 weeks in vitro using a custom-designed perfusion bioreactor system. The flow patterns through the complex geometry were modeled using the FloWorks module of SolidWorks to optimize bioreactor design. The perfused scaffolds exhibited significantly higher cellular content, better matrix production, and increased bone mineral deposition relative to non-perfused (static) controls after 5 weeks of in vitro cultivation. This technology is broadly applicable for creating patient-specific bone grafts of varying shapes and sizes.

  5. Arthroscopy of the temporomandibular joint-technique and indications.

    Science.gov (United States)

    Holmlund, A B

    1989-09-01

    Temporomandibular joint arthroscopy has gained wide interest in reviews of recent literature. With this technique a proper understanding of the anatomical landmarks is important to ensure success. The technique for anesthesia, puncture and the arthroscopic examination are fully described. An inferior lateral approach to the joint compartment is advocated. A description of the equipment used for this procedure together with the functional elements of the instruments are emphasised. Indications for diagnostic arthroscopy together with the possible postoperative complications are presented.

  6. Joint purpose?

    DEFF Research Database (Denmark)

    Pristed Nielsen, Helene

    2013-01-01

    of anti-discrimination in Europe today? And what empirical evidence may be found for such a joint approach? The paper discusses how the contemporary EU context differs from the American context which prompted Crenshaw to raise the point about intersectionality, and it analyses documents and interviews...... from each of the two European umbrella organisations the European Women´s Lobby and the European Network against Racism, as well as a number of their national member organisations from across Europe, both within EU and non-EU member states....

  7. Collective Success or Collective Failure?

    DEFF Research Database (Denmark)

    Fayyaz, Anjum

    In this article, I make a contribution to the literature on how industrial clusters in developing countries respond to corporate responsibility demands from international buyers in Europe and North America. I outline an analytical framework that integrates insights from the global value chain......, industrial cluster, and corporate social responsibility literatures with the aim of explaining why collective cluster action through industry associations and/or public private partnerships succeed or fail in facilitating cluster-wide compliance with CSR standards. I then use this framework to analyze a case...... study of soccer village project to learn how various attempts at facilitating joint CSR action in the Pakistani football manufacturing have consistently failed in addressing international CSR compliance demands. I conclude that this form of collective failure – along with technological changes, lack...

  8. Complex anatomic variation in the brachial region.

    Science.gov (United States)

    Troupis, Th; Michalinos, A; Protogerou, V; Mazarakis, A; Skandalakis, P

    2015-01-01

    Authors describe a case of a complex anatomic variation discovered during dissection of the humeral region. On the right side, brachial artery followed a superficial course. Musculocutaneous nerve did not pierce coracobrachialis muscle but instead passed below the muscle before continuing in the forearm. On the left side, a communication between musculocutaneous and median nerve was dissected. Those variations are analytically presented with a brief review on their anatomic and clinical implications. Considerations on their embryological origin are attempted.

  9. Biochemical and Anatomical Characteristics of Dolphin Muscles.

    Science.gov (United States)

    1984-01-01

    Nekooi, J. Durivage, and C. E. Blanco ) of the University of California, Los Angeles, for their excellent quantitative work in anatomical, biochemi...cal, and histochemical analyses of the dolphin’s musculo -tendonous system. J. E. Haun for providing constant support and guidance in areas of project...potential of these animals by examining the anatomical and biochemical characteristics of the musculo - tendonous systems involved with swimming. Strickler

  10. The Cultural Context of Learning in International Joint Ventures.

    Science.gov (United States)

    Liu, Shimin; Vince, Russ

    1999-01-01

    A study of Chinese-Western joint business ventures showed that cultural context and different modes of managing and organizing must be considered. Successful joint ventures involve a process of collective, two-way learning. (SK)

  11. The Cultural Context of Learning in International Joint Ventures.

    Science.gov (United States)

    Liu, Shimin; Vince, Russ

    1999-01-01

    A study of Chinese-Western joint business ventures showed that cultural context and different modes of managing and organizing must be considered. Successful joint ventures involve a process of collective, two-way learning. (SK)

  12. [Establishment of anatomical terminology in Japan].

    Science.gov (United States)

    Shimada, Kazuyuki

    2008-12-01

    The history of anatomical terminology in Japan began with the publication of Waran Naikei Ihan-teimŏ in 1805 and Chŏtei Kaitai Shinsho in 1826. Although the establishment of Japanese anatomical terminology became necessary during the Meiji era when many western anatomy books imported into Janan were translated, such terminology was not unified during this period and varied among translators. In 1871, Tsukumo Ono's Kaibŏgaku Gosen was published by the Ministry of Education. Although this book is considered to be the first anatomical glossary terms in Japan, its contents were incomplete. Overseas, the German Anatomical Society established a unified anatomical terminology in 1895 called the Basle Nomina Anatomica (B.N.A.). Based on this development, Kaibŏgaku Meishŭ which follows the BNA, by Buntarŏ Suzuki was published in 1905. With the subsequent establishment in 1935 of Jena Nomina Anatomica (J.N.A.), the unification of anatomical terminology was also accelerated in Japan, leading to the further development of terminology.

  13. Topographic anatomical study of the sciatic nerve relationship to the posterior portal in hip arthroscopy

    Directory of Open Access Journals (Sweden)

    Berliet Assad Gomes

    2014-12-01

    Full Text Available Objective: To evaluate the anatomic topographic relation between the sciatic nerve in relation to the piriform muscle and the posterior portal for the establishment of hip arthroscopy. Methods: We dissected 40 hips of 20 corpses of adult Brazilians, 17 male and three female, six black, six brown and eight white. We studied the anatomical relationship between the sciatic nerve and the piriform muscle with their variations and the distance between the lateral edge of the sciatic nerve and the posterior portal used in hip arthroscopy. We then classified the anatomical alterations found in the path of the sciatic nerve on the piriform muscle. Results: Seventeen corpses had bilateral relationship between the sciatic nerve and the piriform muscle, i.e., type A. We found the following anatomical variations: 12.5% of variant type B; and an average distance between the sciatic nerve and the portal for arthroscopy of 2.98cm. One body had type B anatomical variation on the left hip and type A on the right. Conclusion: the making of the posterior arthroscopic portal to the hip joint must be done with careful marking of the trochanter massive; should there be difficult to find it, a small surgical access is recommended. The access point to the portal should not exceed two centimeters towards the posterior superior aspect of the greater trochanter, and must be made with the limb in internal rotation of 15 degrees.

  14. Extravasation of joint fluid into the mediastinum and the deep neck during atthoscopic shoulder surgery

    Energy Technology Data Exchange (ETDEWEB)

    Han, Ji Yeon; Lee, Ki Nam [Dept. of Radiology, Dong-A University Hospital, Dong-A University College of Medicine, Busan (Korea, Republic of)

    2014-01-15

    Extravasation of shoulder joint fluid into the surrounding muscles during shoulder arthroscopic surgery is common and inevitable. Here, we report a case of massive extravasation of shoulder joint fluid leading to mediastinal and retrotracheal effusion after arthroscopic shoulder surgery. We will discuss the anatomical basis of fluid leakage from the shoulder to the mediastinum and to the deep neck on CT.

  15. Transarticular invasion of bone tumours across the sacroiliac joint

    Energy Technology Data Exchange (ETDEWEB)

    Chhaya, S. [University of Toronto, Department of Medical Imaging, Mount Sinai Hospital and the University Health Network, Toronto (Canada); University of Texas Health Science Centre, Department of Radiology, San Antonio, TX (United States); White, L.M. [University of Toronto, Department of Medical Imaging, Mount Sinai Hospital and the University Health Network, Toronto (Canada); Kandel, R. [University of Toronto, Department of Pathology and Laboratory Medicine, Mount Sinai Hospital, Toronto (Canada); Wunder, J.S.; Ferguson, P. [Univeristy of Toronto, University Musculoskeletal Oncology Unit, Department of Orthopedic Surgery, Mount Sinai Hospital, Toronto (Canada); Agur, A. [University of Toronto, Division of Anatomy, Department of Surgery, Toronto (Canada)

    2005-12-01

    The purpose of this study was to evaluate the pattern of tumour spread across the SI articulation, correlating with cadaveric anatomic observations, in order to better understand the local spread of tumour and to assist in the assessment of local staging. Twenty-four consecutive patients (14 male, 10 female; age range 22-89 years, mean 52 years) with primary bone tumours of the iliac bone or sacrum abutting the SI joint, in whom surgical resection of the SI joint was performed, were studied following institutional ethics approval. In all patients, preoperative magnetic resonance (MR) imaging studies of the pelvis and SI joint were reviewed for imaging evidence of transarticular extension across the SI joint. Gross pathologic and histologic assessment of possible transarticular SI joint tumour extension was performed in all patients. Nine cadaveric pelvic specimens without pelvic neoplastic disease (4 male, 5 female; age range 20-84 years, mean 59 years, median 58 years) were anatomically dissected and the articular anatomy of the SI joint examined macroscopically. Twelve of the twenty-four patients demonstrated imaging and histological evidence of transarticular SI joint invasion. Eight tumours infiltrated only the interosseous ligamentous aspect of the SI joint. In the remaining four cases, extensive tumour infiltrated both the cartilaginous and ligamentous aspects of the joint. No case showed tumour involvement isolated to the cartilaginous aspect of the joint. Among the cadaveric specimens studied, degenerative changes were found involving the majority of cases (6/9), with cartilage thinning and fibrillation and antero-superior marginal osteophytes seen involving the cartilaginous portion of the SI joint articulation. Four of the nine specimens demonstrated central ossification bridging the iliac and sacral aspects of the ligamentous (interosseous) SI joint. (orig.)

  16. Acromioclavicular joint reconstruction using the LockDown synthetic implant: a study with cadavers.

    Science.gov (United States)

    Taranu, R; Rushton, P R P; Serrano-Pedraza, I; Holder, L; Wallace, W A; Candal-Couto, J J

    2015-12-01

    Dislocation of the acromioclavicular joint is a relatively common injury and a number of surgical interventions have been described for its treatment. Recently, a synthetic ligament device has become available and been successfully used, however, like other non-native solutions, a compromise must be reached when choosing non-anatomical locations for their placement. This cadaveric study aimed to assess the effect of different clavicular anchorage points for the Lockdown device on the reduction of acromioclavicular joint dislocations, and suggest an optimal location. We also assessed whether further stability is provided using a coracoacromial ligament transfer (a modified Neviaser technique). The acromioclavicular joint was exposed on seven fresh-frozen cadaveric shoulders. The joint was reconstructed using the Lockdown implant using four different clavicular anchorage points and reduction was measured. The coracoacromial ligament was then transferred to the lateral end of the clavicle, and the joint re-assessed. If the Lockdown ligament was secured at the level of the conoid tubercle, the acromioclavicular joint could be reduced anatomically in all cases. If placed medial or 2 cm lateral, the joint was irreducible. If the Lockdown was placed 1 cm lateral to the conoid tubercle, the joint could be reduced with difficulty in four cases. Correct placement of the Lockdown device is crucial to allow anatomical joint reduction. Even when the Lockdown was placed over the conoid tubercle, anterior clavicle displacement remained but this could be controlled using a coracoacromial ligament transfer. ©2015 The British Editorial Society of Bone & Joint Surgery.

  17. [Linburg-Comstock syndrome. Epidemiologic and anatomic study, clinical applications].

    Science.gov (United States)

    Hamitouche, K; Roux, J L; Baeten, Y; Allieu, Y

    2000-05-01

    The Linburg-Comstock (LC) syndrome is distinguished by the inability to actively flex the interphalangeal (IP) joint of the thumb without simultaneously flexing the distal IP joint of the index finger. Any resistance to this 'parasitic' reaction causes pain on the palmar side of the wrist or in the distal part of the forearm; this is due to an anomalous tendinous connection between the flexor pollicus longus (FPL) and the flexor digitorum profundus (FDP). An epidemiological study was carried out on 264 individuals (a total of 528 hands were examined), and the LC syndrome was found in 98 subjects (37%); women were more frequently affected than men, and bilaterally rather than unilaterally. In addition, we dissected 26 fresh cadaver upper limbs, and in seven cases found an anomalous connection between FPL and FDP. We also examined the case of a young violinist with bilateral LC syndrome, who complained of pain in the distal part of the left forearm after prolonged musical exercises. Surgical investigation determined a complete fusion between FPL and FDP of the index with a common tendon. Treatment consisted of splitting this common tendon to form two separate tendons, thereby permitting a certain degree of independence between the thumb and index finger, and which considerably improved the violinist's musical performance. A review of the literature showed that there was a large quantity of anatomical descriptions available on these types of connection. Certain publications also provide an extremely precise report on the anthropological significance of these anomalies.

  18. Automatic anatomical structures location based on dynamic shape measurement

    Science.gov (United States)

    Witkowski, Marcin; Rapp, Walter; Sitnik, Robert; Kujawinska, Malgorzata; Vander Sloten, Jos; Haex, Bart; Bogaert, Nico; Heitmann, Kjell

    2005-09-01

    New image processing methods and active photonics apparatus have made possible the development of relatively inexpensive optical systems for complex shape and object measurements. We present dynamic 360° scanning method for analysis of human lower body biomechanics, with an emphasis on the analysis of the knee joint. The anatomical structure (of high medical interest) that is possible to scan and analyze, is patella. Tracking of patella position and orientation under dynamic conditions may lead to detect pathological patella movements and help in knee joint disease diagnosis. The processed data is obtained from a dynamic laser triangulation surface measurement system, able to capture slow to normal movements with a scan frequency between 15 and 30 Hz. These frequency rates are enough to capture controlled movements used e.g. for medical examination purposes. The purpose of the work presented is to develop surface analysis methods that may be used as support of diagnosis of motoric abilities of lower limbs. The paper presents algorithms used to process acquired lower limbs surface data in order to find the position and orientation of patella. The algorithms implemented include input data preparation, curvature description methods, knee region discrimination and patella assumed position/orientation calculation. Additionally, a method of 4D (3D + time) medical data visualization is proposed. Also some exemplary results are presented.

  19. MR tomography of the elbow joint

    Energy Technology Data Exchange (ETDEWEB)

    Zwaan, M.; Rinast, E.; Weiss, H.D.; Pressler, M.; Vogel, H.

    1989-03-01

    MR examinations of the elbow joint of three healthy subjects and a comparison with corresponding sections of anatomical preparations show that MR tomography enables not only an excellent differentiation of muscles, tendons and of the articular capsule, but will also visualise vessels and nerve tracts. MR tomography proved superior to the conventional methods in demonstration of separate fragments and inflammatory changes in the bone on examining 11 pathological elbow joints: congenital malformation, osteochondritis dissecans, ostitis, ulnar and radial nerve lesions, completely healed radius fracture and epicondylitis of the radial and ulnar humerus. Epicondylitis could not be demonstrated by MR. Magnetic resonance tomography seems to be the only method that enables direct visualisation of the nerve paths at the elbow joint.

  20. Acromioclavicular joint injuries: anatomy, diagnosis, and treatment.

    Science.gov (United States)

    Willimon, S Clifton; Gaskill, Trevor R; Millett, Peter J

    2011-02-01

    Acromioclavicular (AC) joint injuries are common in athletic populations and account for 40% to 50% of shoulder injuries in many contact sports, including lacrosse, hockey, rugby and football. The AC joint is stabilized by static and dynamic restraints, including the coracoclavicular (CC) ligaments. Knowledge of these supporting structures is important when identifying injury and directing treatment. Management of AC injuries should be guided by severity of injury, duration of injury and symptoms, and individual patient factors. These help determine how best to guide management, and whether patients should be treated surgically or nonsurgically. Treatment options for AC injuries continue to expand, and include arthroscopic-assisted anatomic reconstruction of the CC ligaments. The purpose of this article is to review the anatomy, diagnostic methods, and treatment options for AC joint injuries. In addition, the authors' preferred reconstruction technique and outcomes are presented.

  1. Noninvasively measuring oxygen saturation of human finger-joint vessels by multi-transducer functional photoacoustic tomography

    Science.gov (United States)

    Deng, Zijian; Li, Changhui

    2016-06-01

    Imaging small blood vessels and measuring their functional information in finger joint are still challenges for clinical imaging modalities. In this study, we developed a multi-transducer functional photoacoustic tomography (PAT) system and successfully imaged human finger-joint vessels from ˜1 mm to anatomical and functional information of individual finger-joint vessels with different sizes, which might help the study of finger-joint diseases, such as rheumatoid arthritis.

  2. PREVALENCE OF ANATOMIC VARIATIONS IN CHRONIC RHINOSINUSITIS.

    Directory of Open Access Journals (Sweden)

    Shrikrishna

    2013-03-01

    Full Text Available ABSTRACT: OBJECTIVE: To determine the prevalence of anatomic variations in patients suffering from chronic rhinosinusitis (CRS and to compare them with normal population. DESIGN: This is a case control study. A prospective s tudy of anatomic variations was done on 100 computed tomography (CT scans of patients with chronic rhinosinusitis. Prevalence of anatomic variations in control group was assessed by studying 100 CT scans of non- CRS patients. RESULTS: Even though proportion of concha bullosa was more among chronic rhinosinusitis patients compared to normal individual s, it was statistically not significant. There was no significant difference in the prevalence of pa radoxical middle turbinate, retroverted uncinate process, overpneumatized ethmoid bulla and s eptal deviation in chronic rhinosinusitis patients compared to normal individuals. There was s ignificantly lesser proportion of individuals having haller cells and agger nasi cell s in chronic rhinosinusitis compared to normal individuals. CONCLUSION: There is no significant prevalence of anatomic vari ations in osteomeatal unit in patients with chronic rhinosinus itis. The anatomic variations may predispose to pathological changes only if they are bi gger in size. More detailed studies are recommended in this regard as a good knowledge of c omplex anatomy of the paranasal sinuses is essential to understand chronic rhinosinusitis a nd to plan its treatment

  3. Lateral laryngopharyngeal diverticulum: anatomical and videofluoroscopic study

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Milton Melciades Barbosa [Universidade Federal do Rio de Janeiro ICB/CCS/UFRJ, Laboratorio de Motilidade Digestiva e Imagem, S. F1-008, Departamento de Anatomia, Rio de Janeiro (Brazil); Koch, Hilton Augusto [Universidade Federal do Rio de Janeiro ICB/CCS/UFRJ, Departamento de Radiologia, Rio de Janeiro (Brazil)

    2005-07-01

    The aims were to characterize the anatomical region where the lateral laryngopharyngeal protrusion occurs and to define if this protrusion is a normal or a pathological entity. This protrusion was observed on frontal contrasted radiographs as an addition image on the upper portion of the laryngopharynx. We carried out a plane-by-plane qualitative anatomical study through macroscopic and mesoscopic surgical dissection on 12 pieces and analyzed through a videofluoroscopic method on frontal incidence the pharyngeal phase of the swallowing process of 33 patients who had a lateral laryngopharyngeal protrusion. The anatomical study allowed us to identify the morphological characteristics that configure the high portion of the piriform recess as a weak anatomical point. The videofluoroscopic study allowed us to observe the laryngopharyngeal protrusion and its relation to pharyngeal repletion of the contrast medium. All kinds of the observed protrusions could be classified as ''lateral laryngopharyngeal diverticula.'' The lateral diverticula were more frequent in older people. These lateral protrusions can be found on one or both sides, usually with a small volume, without sex or side prevalence. This formation is probably a sign of a pharyngeal transference difficulty associated with a deficient tissue resistance in the weak anatomical point of the high portion of the piriform recess. (orig.)

  4. Anatomical eponyms - unloved names in medical terminology.

    Science.gov (United States)

    Burdan, F; Dworzański, W; Cendrowska-Pinkosz, M; Burdan, M; Dworzańska, A

    2016-01-01

    Uniform international terminology is a fundamental issue of medicine. Names of various organs or structures have developed since early human history. The first proper anatomical books were written by Hippocrates, Aristotle and Galen. For this reason the modern terms originated from Latin or Greek. In a modern time the terminology was improved in particular by Vasalius, Fabricius and Harvey. Presently each known structure has internationally approved term that is explained in anatomical or histological terminology. However, some elements received eponyms, terms that incorporate the surname of the people that usually describe them for the first time or studied them (e.g., circle of Willis, follicle of Graff, fossa of Sylvious, foramen of Monro, Adamkiewicz artery). Literature and historical hero also influenced medical vocabulary (e.g. Achilles tendon and Atlas). According to various scientists, all the eponyms bring colour to medicine, embed medical traditions and culture to our history but lack accuracy, lead of confusion, and hamper scientific discussion. The current article presents a wide list of the anatomical eponyms with their proper anatomical term or description according to international anatomical terminology. However, since different eponyms are used in various countries, the list could be expanded.

  5. Determining customer satisfaction in anatomic pathology.

    Science.gov (United States)

    Zarbo, Richard J

    2006-05-01

    Measurement of physicians' and patients' satisfaction with laboratory services has become a standard practice in the United States, prompted by national accreditation requirements. Unlike other surveys of hospital-, outpatient care-, or physician-related activities, no ongoing, comprehensive customer satisfaction survey of anatomic pathology services is available for subscription that would allow continual benchmarking against peer laboratories. Pathologists, therefore, must often design their own local assessment tools to determine physician satisfaction in anatomic pathology. To describe satisfaction survey design that would elicit specific information from physician customers about key elements of anatomic pathology services. The author shares his experience in biannually assessing customer satisfaction in anatomic pathology with survey tools designed at the Henry Ford Hospital, Detroit, Mich. Benchmarks for physician satisfaction, opportunities for improvement, and characteristics that correlated with a high level of physician satisfaction were identified nationally from a standardized survey tool used by 94 laboratories in the 2001 College of American Pathologists Q-Probes quality improvement program. In general, physicians are most satisfied with professional diagnostic services and least satisfied with pathology services related to poor communication. A well-designed and conducted customer satisfaction survey is an opportunity for pathologists to periodically educate physician customers about services offered, manage unrealistic expectations, and understand the evolving needs of the physician customer. Armed with current information from physician customers, the pathologist is better able to strategically plan for resources that facilitate performance improvements in anatomic pathology laboratory services that align with evolving clinical needs in health care delivery.

  6. [BODIES ARTIFACTS AND ANATOMICAL MODELS].

    Science.gov (United States)

    Aruta, Alessandro

    2015-01-01

    Through three different museological approaches, diachronically arranged, the essay intends to introduce some pertinent questions related to the topic of the conference "Bodies and Anatomy: the corpses in the museums from Ruysch to Von Hagens. The first item analyzes a recent line of British museological studies, treating mainly medical British museums of the XVIII and XIX century, with intriguing developments arriving up to nowadays. A second point illustrates several aspects with regards to the donation and the arrangement of the morbid specimina Luigi Gedda collection, coming from the CSS Mendel of Rome to the Museum of Pathological Anatomy of Sapienza University of Rome. Finally, in a crossover between the previous points, it will be presented some recent studies regarding the employment of new communication technologies in the scientific and medical museology.

  7. Influence of species and anatomical location on chondrocyte expansion

    Directory of Open Access Journals (Sweden)

    Hurtig Mark B

    2005-05-01

    Full Text Available Abstract Background Bovine articular cartilage is often used to study chondrocytes in vitro. It is difficult to correlate in vitro studies using bovine chondrocytes with in vivo studies using other species such as rabbits and sheep. The aim of this investigation was to study the effect of species, anatomical location and exogenous growth factors on chondrocyte proliferation in vitro. Methods Equine (EQ, bovine (BO and ovine (OV articular chondrocytes from metacarpophalangeal (fetlock (F, shoulder (S and knee (K joints were cultured in tissue culture flasks. Growth factors (rh-FGFb: 10 ng/ml; rh-TGFβ: 5 ng/ml were added to the cultures at days 2 and 4. On day 6, cells were counted and flow cytometry analysis was performed to determine cell size and granularity. A three factor ANOVA with paired Tukey's correction was used for statistical analysis. Results After 6 days in culture, cell numbers had increased in control groups of EQ-F, OV-S, OV-F and BO-F chondrocytes. The addition of rh-FGFb led to the highest increase in cell numbers in the BO-F, followed by EQ-F and OV-S chondrocytes. The addition of rh-TGFβ increased cell numbers in EQ-S and EQ-F chondrocytes, but showed nearly no effect on EQ-K, OV-K, OV-S, OV-F and BO-F chondrocytes. There was an overall difference with the addition of growth factors between the different species and joints. Conclusion Different proliferation profiles of chondrocytes from the various joints were found. Therefore, we recommend performing in vitro studies using the species and site where subsequent in vivo studies are planned.

  8. Posterolateral supporting structures of the knee: findings on anatomic dissection, anatomic slices and MR images

    Energy Technology Data Exchange (ETDEWEB)

    Maeseneer, M. de; Shahabpour, M.; Vanderdood, K.; Ridder, F. de; Osteaux, M. [Dept. of Radiology, Free Univ. Brussels (Belgium); Roy, F. van [Dept. of Experimental Anatomy, Free Univ. Brussels (Belgium)

    2001-11-01

    In this article we study the ligaments and tendons of the posterolateral corner of the knee by anatomic dissection, MR-anatomic correlation, and MR imaging. The posterolateral aspect of two fresh cadaveric knee specimens was dissected. The MR-anatomic correlation was performed in three other specimens. The MR images of 122 patients were reviewed and assessed for the visualization of different posterolateral structures. Anatomic dissection and MR-anatomic correlation demonstrated the lateral collateral, fabellofibular, and arcuate ligaments, as well as the biceps and popliteus tendons. On MR images of patients the lateral collateral ligament was depicted in all cases. The fabellofibular, arcuate, and popliteofibular ligaments were visualized in 33, 25, and 38% of patients, respectively. Magnetic resonance imaging allows a detailed appreciation of the posterolateral corner of the knee. (orig.)

  9. Joint Replacement (Finger and Wrist Joints)

    Science.gov (United States)

    ... artificial joint Damage to vessels, nerves or other structures in the region of the surgery Alternatives Some alternate procedures for treating arthritis include: Joint injections Oral medications such as aspirin or anti-inflammatory medicines Hand therapy exercises and ...

  10. Divergent dislocation of the ring and little finger carpometacarpal joints--a rare injury pattern.

    LENUS (Irish Health Repository)

    Dillon, John

    2012-02-03

    Hand injuries due to longitudinal forces in the line of the metacarpals demonstrate unusual dislocation patterns. We describe a case of volar intra-articular fracture dislocation of the ring finger carpometacarpal joint in association with a pure dorsal dislocation of the little finger carpometacarpal joint. Open reduction supplemented with Kirschner wire fixation restored normal carpometacarpal joint anatomical relations and achieved an excellent clinical result.

  11. Anatomic Breast Coordinate System for Mammogram Analysis

    DEFF Research Database (Denmark)

    Karemore, Gopal Raghunath; Brandt, S; Karssemeijer, N;

    2011-01-01

    inside the breast. Most of the risk assessment and CAD modules use a breast region in a image centered Cartesian x,y coordinate system. Nevertheless, anatomical structure follows curve-linear trajectories. We examined an anatomical breast coordinate system that preserves the anatomical correspondence...... between the mammograms and allows extracting not only the aligned position but also the orientation aligned with the anatomy of the breast tissue structure. Materials and Methods The coordinate system used the nipple location as the point A and the border of the pectoral muscle as a line BC. The skin air...... was represented by geodesic distance (s) from nipple and parametric angle (¿) as shown in figure 1. The scoring technique called MTR (mammographic texture resemblance marker) used this breast coordinate system to extract Gaussian derivative features. The features extracted using the (x,y) and the curve...

  12. INFLUENCE OF ANATOMICAL FEATURES AND EXTRACTIVES CONTENT WOOD OF Eucalyptus grandis W. Hill ex Maiden IN QUALITY BONDING

    Directory of Open Access Journals (Sweden)

    Vanessa Cristina do Sacramento Albino

    2012-12-01

    Full Text Available http://dx.doi.org/10.5902/198050987561The study aimed to anatomically characterize and to quantify the total extractives in different positions of the log of Eucalyptus grandis W. Hill ex Maiden with 18 years of age and to assess their influence on the shear strength and percentage of wood failure in adhesive bonded joints with thermosetting resorcinol-formaldehyde. Histological slides were prepared for an anatomical study and determined the total extractive content. The preparation of bonded joints was made according to ASTM D 2339-98(2000. It was used the correlation coefficient of Pearson, 1% probability by t test to evaluate the correlation between the anatomical and extractives content with the quality of the glued joints. It was found that there was a correlation between the shear strength with the following characteristics: vessel diameter, wall width, length and width of the fiber, the width of the radius and total extractives content. For the percentage of wood failure, there was a correlation between this with the following characteristics: the frequency of vessels, thickness of the heat of fiber, and high frequency of lightning. Both the radial direction as in the longitudinal direction of the logs there was change in the values found for the measurement of the anatomical elements, the total amount of extractives, the shear test strength and the percentage of wood failure.

  13. Standardized anatomic space for abdominal fat quantification

    Science.gov (United States)

    Tong, Yubing; Udupa, Jayaram K.; Torigian, Drew A.

    2014-03-01

    The ability to accurately measure subcutaneous adipose tissue (SAT) and visceral adipose tissue (VAT) from images is important for improved assessment and management of patients with various conditions such as obesity, diabetes mellitus, obstructive sleep apnea, cardiovascular disease, kidney disease, and degenerative disease. Although imaging and analysis methods to measure the volume of these tissue components have been developed [1, 2], in clinical practice, an estimate of the amount of fat is obtained from just one transverse abdominal CT slice typically acquired at the level of the L4-L5 vertebrae for various reasons including decreased radiation exposure and cost [3-5]. It is generally assumed that such an estimate reliably depicts the burden of fat in the body. This paper sets out to answer two questions related to this issue which have not been addressed in the literature. How does one ensure that the slices used for correlation calculation from different subjects are at the same anatomic location? At what anatomic location do the volumes of SAT and VAT correlate maximally with the corresponding single-slice area measures? To answer these questions, we propose two approaches for slice localization: linear mapping and non-linear mapping which is a novel learning based strategy for mapping slice locations to a standardized anatomic space so that same anatomic slice locations are identified in different subjects. We then study the volume-to-area correlations and determine where they become maximal. We demonstrate on 50 abdominal CT data sets that this mapping achieves significantly improved consistency of anatomic localization compared to current practice. Our results also indicate that maximum correlations are achieved at different anatomic locations for SAT and VAT which are both different from the L4-L5 junction commonly utilized.

  14. Spacesuit mobility knee joints

    Science.gov (United States)

    Vykukal, H. C. (Inventor)

    1979-01-01

    Pressure suit mobility joints are for use in interconnecting adjacent segments of an hermetically sealed spacesuit in which low torques, low leakage and a high degree of reliability are required. Each of the joints is a special purpose joint characterized by substantially constant volume and low torque characteristics and includes linkages which restrain the joint from longitudinal distension and includes a flexible, substantially impermeable diaphragm of tubular configuration spanning the distance between pivotally supported annuli. The diaphragms of selected joints include rolling convolutions for balancing the joints, while various joints include wedge-shaped sections which enhance the range of motion for the joints.

  15. Anatomical basis for Wilms tumor surgery

    Directory of Open Access Journals (Sweden)

    Trobs R

    2009-01-01

    Full Text Available Wilms tumor surgery requires meticulous planning and sophisticated surgical technique. Detailed anatomical knowledge can facilitate the uneventful performance of tumor nephrectomy and cannot be replaced by advanced and sophisticated imaging techniques. We can define two main goals for surgery: (1 exact staging as well as (2 safe and complete resection of tumor without spillage. This review aims to review the anatomical basis for Wilms tumor surgery. It focuses on the surgical anatomy of retroperitoneal space, aorta, vena cava and their large branches with lymphatics. Types and management of vascular injuries are discussed.

  16. Congenital neck masses: embryological and anatomical perspectives

    Directory of Open Access Journals (Sweden)

    Zahida Rasool

    2013-08-01

    Full Text Available Neck masses are a common problem in paediatric age group. They tend to occur frequently and pose a diagnostic dilemma to the ENT surgeons. Although the midline and lateral neck masses differ considerably in their texture and presentation but the embryological perspective of these masses is not mostly understood along with the fundamental anatomical knowledge. The article tries to correlate the embryological, anatomical and clinical perspectives for the same. [Int J Res Med Sci 2013; 1(4.000: 329-332

  17. Depressive Symptoms, Anatomical Region, and Clinical Outcomes for Patients Seeking Outpatient Physical Therapy for Musculoskeletal Pain

    Science.gov (United States)

    Coronado, Rogelio A.; Beneciuk, Jason M.; Valencia, Carolina; Werneke, Mark W.; Hart, Dennis L.

    2011-01-01

    Background Clinical guidelines advocate the routine identification of depressive symptoms for patients with pain in the lumbar or cervical spine, but not for other anatomical regions. Objective The purpose of this study was to investigate the prevalence and impact of depressive symptoms for patients with musculoskeletal pain across different anatomical regions. Design This was a prospective, associational study. Methods Demographic, clinical, depressive symptom (Symptom Checklist 90–Revised), and outcome data were collected by self-report from a convenience sample of 8,304 patients. Frequency of severe depressive symptoms was assessed by chi-square analysis for demographic and clinical variables. An analysis of variance examined the influence of depressive symptoms and anatomical region on intake pain intensity and functional status. Separate hierarchical multiple regression models by anatomical region examined the influence of depressive symptoms on clinical outcomes. Results Prevalence of severe depression was higher in women, in industrial and pain clinics, and in patients who reported chronic pain or prior surgery. Lower prevalence rates were found in patients older than 65 years and those who had upper- or lower-extremity pain. Depressive symptoms had a moderate to large effect on pain ratings (Cohen d=0.55–0.87) and a small to large effect on functional status (Cohen d=0.28–0.95). In multivariate analysis, depressive symptoms contributed additional variance to pain intensity and functional status for all anatomical locations, except for discharge values for the cervical region. Conclusions Rates of depressive symptoms varied slightly based on anatomical region of musculoskeletal pain. Depressive symptoms had a consistent detrimental influence on outcomes, except on discharge scores for the cervical anatomical region. Expanding screening recommendations for depressive symptoms to include more anatomical regions may be indicated in physical therapy

  18. Joint Operations

    Science.gov (United States)

    2006-09-17

    Unified Task Force (UNITAF) Somalia was formed with forces from France, Italy, Canada, Belgium, Egypt , Turkey, Saudi Arabia, and the United States...military presence, open-source intelligence ( OSINT ) may be the best immediately available information to prepare US forces to operate in a foreign...country. OSINT from radio broadcasts, newspapers, and periodicals often provide tip-offs for HUMINT and other intelligence and information collection

  19. [Physical therapy for temporomandibular joint anterior disc displacement without reduction].

    Science.gov (United States)

    Cai, B

    2017-03-09

    Temporomandibular joint (TMJ) anterior disc displacement without reduction (ADDwoR) is a common type of temporomandibular joint disorders. Most patients experience limited mouth opening and joint pain at the same time. The standpoint of physical therapy is the function of the joint instead of the displaced disc. The treatment aims to make symptoms disappeared and joint function regained through 3M techniques, including modality, manual and movement. For ADDwoR patients with limited mouth opening within 2 month, manual therapy may reposition disc and the following splint and movement therapy can maintain disc-condyle relationship. Even so, restoring anatomical relationship is not the end of physical therapy. Enhanced health education and multidisciplinary cooperation are important for successful management of the ADDwoR patients.

  20. MR neurography with multiplanar reconstruction of 3D MRI datasets: an anatomical study and clinical applications

    Energy Technology Data Exchange (ETDEWEB)

    Freund, Wolfgang; Aschoff, Andrik J.; Stuber, Gregor; Schmitz, Bernd [University Hospitals Ulm, Clinic for Diagnostic and Interventional Radiology, Ulm (Germany); Brinkmann, Alexander; Wagner, Florian; Dinse, Alexander [University Hospitals Ulm, Department of Anesthesiology, Ulm (Germany)

    2007-04-15

    Extracranial MR neurography has so far mainly been used with 2D datasets. We investigated the use of 3D datasets for peripheral neurography of the sciatic nerve. A total of 40 thighs (20 healthy volunteers) were examined with a coronally oriented magnetization-prepared rapid acquisition gradient echo sequence with isotropic voxels of 1 x 1 x 1 mm and a field of view of 500 mm. Anatomical landmarks were palpated and marked with MRI markers. After MR scanning, the sciatic nerve was identified by two readers independently in the resulting 3D dataset. In every volunteer, the sciatic nerve could be identified bilaterally over the whole length of the thigh, even in areas of close contact to isointense muscles. The landmark of the greater trochanter was falsely palpated by 2.2 cm, and the knee joint by 1 cm. The mean distance between the bifurcation of the sciatic nerve and the knee-joint gap was 6 cm ({+-}1.8 cm). The mean results of the two readers differed by 1-6%. With the described method of MR neurography, the sciatic nerve was depicted reliably and objectively in great anatomical detail over the whole length of the thigh. Important anatomical information can be obtained. The clinical applications of MR neurography for the brachial plexus and lumbosacral plexus/sciatic nerve are discussed. (orig.)

  1. Handbook of anatomical models for radiation dosimetry

    CERN Document Server

    Eckerman, Keith F

    2010-01-01

    Covering the history of human model development, this title presents the major anatomical and physical models that have been developed for human body radiation protection, diagnostic imaging, and nuclear medicine therapy. It explores how these models have evolved and the role that modern technologies have played in this development.

  2. Giving Ourselves: The Ethics of Anatomical Donation

    Science.gov (United States)

    Gunderman, Richard B.

    2008-01-01

    In some European countries, such as Italy, medical education is threatened by a dearth of anatomical specimens. Such a shortage could spread to other nations, including the United States. This article addresses two ethical questions in body donation. Why might people choose to donate their bodies to education and science? What sorts of ethical…

  3. Report of a rare anatomic variant

    DEFF Research Database (Denmark)

    De Brucker, Y; Ilsen, B; Muylaert, C;

    2015-01-01

    We report the CT findings in a case of partial anomalous pulmonary venous return (PAPVR) from the left upper lobe in an adult. PAPVR is an anatomic variant in which one to three pulmonary veins drain into the right atrium or its tributaries, rather than into the left atrium. This results in a lef...

  4. HPV Vaccine Effective at Multiple Anatomic Sites

    Science.gov (United States)

    A new study from NCI researchers finds that the HPV vaccine protects young women from infection with high-risk HPV types at the three primary anatomic sites where persistent HPV infections can cause cancer. The multi-site protection also was observed at l

  5. [Anatomic variants of Meckel's cave on MRI].

    Science.gov (United States)

    Benoudiba, F; Hadj-Rabia, M; Iffenecker, C; Fuerxer, F; Bekkali, F; Francke, J P; Doyon, D

    1998-10-01

    Magnetic resonance imaging (MRI) gives an accurate analysis of Meckel's cave variability. Images were acquired in 50 patients with several sections for anatomical comparison. Using several sections, MRI is a suitable method for better analysis of the trigeminal cistern. The most frequent findings are symmetrical trigeminal cisterns. Expansion of Meckel's cave or its disappearance has pathological significance.

  6. Anatomical challenges for transcatheter mitral valve intervention

    DEFF Research Database (Denmark)

    De Backer, Ole; Luk, Ngai H V; Søndergaard, Lars

    2016-01-01

    development process and mixed clinical results with these novel technologies. This review aims to discuss the several anatomical aspects and challenges related to transcatheter mitral valve intervention - the relevant anatomy will be reviewed in relation to specific requirements for device design...

  7. Anatomical Data for Analyzing Human Motion.

    Science.gov (United States)

    Plagenhoef, Stanley; And Others

    1983-01-01

    Anatomical data obtained from cadavers and from water displacement studies with living subjects were used to determine the weight, center of gravity, and radius of gyration for 16 body segments. A lead model was used to study movement patterns of the trunk section of the body. (Authors/PP)

  8. Wood anatomical classification using iterative character weighing

    NARCIS (Netherlands)

    Hogeweg, P.; Koek-Noorman, J.

    1975-01-01

    In this paper we investigate the pattern of wood anatomical variation in some groups of Rubiaceae (i.e. Cinchoneae, Rondeletieae and Condamineae) by using a numerical pattern detection method which involves character weighing (Hogeweg 1975). In this method character weights are obtained iteratively

  9. Evolution of the Anatomical Theatre in Padova

    Science.gov (United States)

    Macchi, Veronica; Porzionato, Andrea; Stecco, Carla; Caro, Raffaele

    2014-01-01

    The anatomical theatre played a pivotal role in the evolution of medical education, allowing students to directly observe and participate in the process of dissection. Due to the increase of training programs in clinical anatomy, the Institute of Human Anatomy at the University of Padova has renovated its dissecting room. The main guidelines in…

  10. Influences on anatomical knowledge: The complete arguments

    NARCIS (Netherlands)

    Bergman, E.M.; Verheijen, I.W.; Scherpbier, A.J.J.A.; Vleuten, C.P.M. van der; Bruin, A.B. De

    2014-01-01

    Eight factors are claimed to have a negative influence on anatomical knowledge of medical students: (1) teaching by nonmedically qualified teachers, (2) the absence of a core anatomy curriculum, (3) decreased use of dissection as a teaching tool, (4) lack of teaching anatomy in context, (5) integrat

  11. Sensory manifestations of diabetic neuropathies: anatomical and clinical correlations.

    Science.gov (United States)

    Kazamel, Mohamed; Dyck, Peter J

    2015-02-01

    Diabetes mellitus is among the most common causes of peripheral neuropathy worldwide. Sensory impairment in diabetics is a major risk factor of plantar ulcers and neurogenic arthropathy (Charcot joints) causing severe morbidity and high health-care costs. To discuss the different patterns of sensory alterations in diabetic neuropathies and their anatomical basis. Literature review. Review of the literature discussing different patterns of sensory impairment in diabetic neuropathies. The different varieties of diabetic neuropathies include typical sensorimotor polyneuropathy (lower extremity predominant, length-dependent, symmetric, sensorimotor polyneuropathy presumably related to chronic hyperglycemic exposure, and related metabolic events), entrapment mononeuropathies, radiculoplexus neuropathies related to immune inflammatory ischemic events, cranial neuropathies, and treatment-related neuropathies (e.g. insulin neuritis). None of these patterns are unique for diabetes, and they can occur in nondiabetics. Sensory alterations are different among these prototypic varieties and are vital in diagnosis, following course, treatment options, and follow-up of treatment effects. Diabetic neuropathies can involve any segment of peripheral nerves from nerve roots to the nerve endings giving different patterns of abnormal sensation. It is the involvement of small fibers that causes positive sensory symptoms like pain early during the course of disease, bringing subjects to physician's care. This article emphasizes on the fact that diabetic neuropathies are not a single entity. They are rather different varieties of conditions with more or less separate pathophysiological mechanisms and anatomical localization. Clinicians should keep this in mind when assessing patients with diabetes on the first visit or follow-up. © The International Society for Prosthetics and Orthotics 2014.

  12. Two Australian Fetuses: Frederic Wood Jones and the Work of an Anatomical Specimen.

    Science.gov (United States)

    O'Sullivan, Lisa; Jones, Ross L

    2015-01-01

    A close analysis of two fetal specimens is used to explore of role of material specimens in anatomical practice of the late nineteenth and early twentieth centuries, the significance of Indigenous bodies in that era's quest for an understanding of human difference, and the postcolonial legacies of the global project of creating collections of human specimens.

  13. Joint imaging in childhood and adolescence

    Energy Technology Data Exchange (ETDEWEB)

    Lopes Viana, Sergio [Hospital da Crianca de Brasilia - Jose Alencar Clinica Vila Rica (Brazil); Machado, Ribeiro, Maria Custodia [Hospital da Crianca de Brasilia - Jose Alencar Hospital de Base do Distrito Federal (Brazil); Beber Machado, Bruno [Clinica Radiologica Med Imagem, Unimed Sul Caprixaba, Santa Casa de Misericordia de Cachoeiro de Itapemirim (Brazil)

    2013-11-01

    First book to be devoted to the imaging of skeletally immature joints since the advent of cross-sectional methods. Covers a wide range of pathologic conditions. Identifies the advantages and weak points of each imaging method. Highlights anatomic and developmental peculiarities of the growing skeleton. Richly illustrated, with up-to-date references and summaries of key points. Since the advent of cross-sectional imaging methods, few works have been devoted to pediatric musculoskeletal imaging, and information is especially limited on the skeletally immature joint. Furthermore, reduced emphasis on pediatric training means that general radiologists are increasingly unfamiliar with normal and abnormal imaging findings in children and adolescents. Knowledge of the imaging appearances of the immature joint is, however, crucial for correct image interpretation. This book covers key selected topics in the imaging evaluation of the skeletally immature joint. The opening chapters consider the current role, advantages, and limitations of each modality in pediatric assessment and present the imaging appearances of anatomic and developmental peculiarities of the growing skeleton. Findings in a wide range of important conditions are then described in a series of richly illustrated chapters that document appearances on diverse imaging studies, from conventional radiography through to modern high-tech modalities. By presenting the essential information on imaging of the immature joint, the authors hope to provide radiologists (musculoskeletal specialists and generalists alike) with a new tool that will assist greatly in overcoming the daily challenges posed by interpretation of pediatric examinations in the twenty-first century. The book will also be of interest to all other specialists involved in the diagnosis and treatment of children and adolescents with articular complaints.

  14. ANATOMIC STRUCTURE OF CAMPANULA ROTUNDIFOLIA L. GRASS

    Directory of Open Access Journals (Sweden)

    V. N. Bubenchikova

    2017-01-01

    Full Text Available The article present results of the study for a anatomic structure of Campanula rotundifolia grass from Campanulaceae family. Despite its dispersion and application in folk medicine, there are no data about its anatomic structure, therefore to estimate the indices of authenticity and quality of raw materials it is necessary to develop microdiagnostical features in the first place, which could help introducing of thisplant in a medical practice. The purpose of this work is to study anatomical structureof Campanula rotundifolia grass to determine its diagnostic features. Methods. Thestudy for anatomic structure was carried out in accordance with the requirements of State Pharmacopoeia, edition XIII. Micromed laboratory microscope with digital adjutage was used to create microphotoes, Photoshop CC was used for their processing. Result. We have established that stalk epidermis is prosenchymal, slightly winding with straight of splayed end cells. After study for the epidermis cells we established that upper epidermis cells had straight walls and are slightly winding. The cells of lower epidermishave more winding walls with prolong wrinkled cuticule. Presence of simple one-cell, thin wall, rough papillose hair on leaf and stalk epidermis. Cells of epidermis in fauces of corolla are prosenchymal, with winding walls, straight or winding walls in a cup. Papillary excrescences can be found along the cup edges. Stomatal apparatus is anomocytic. Conclusion. As the result of the study we have carried out the research for Campanula rotundifolia grass anatomic structure, and determined microdiagnostic features for determination of raw materials authenticity, which included presence of simple, one-cell, thin-walled, rough papillose hair on both epidermises of a leaf, along the veins, leaf edge, and stalk epidermis, as well as the presence of epidermis cells with papillary excrescences along the edges of leaves and cups. Intercellular canals are situatedalong the

  15. International joint ventures

    DEFF Research Database (Denmark)

    Sørensen, Karsten Engsig

    2001-01-01

    The article analysis problems connected with corporate joint ventures. Among others the possible conflicts between the joint venture agreement and the statutes of the companies is examined, as well as certain problems connected to the fact that the joint venture partners have created commen control...... over their joint company....

  16. Anatomic considerations of costotransverse screw placement in the thoracic spine.

    Science.gov (United States)

    Xu, R; Ebraheim, N A; Ou, Y; Skie, M; Yeasting, R A

    2000-04-01

    Numerous techniques have been reported to restore spinal stability and to correct spinal deformities, including rods with wires/hooks, and rods or plates with pedicular screws. It was thought that posterior fixation of the thoracic spine through the costotransverse joint may be another alternative. Nine cadavers were obtained for study of screw fixation of the costotransverse joint for posterior thoracic instrumentation. The entrance point for screw insertion was designed to be at the posterior center of the clubbed extremity of the transverse process. From this point, a 3-mm drill bit was used to create the screw path penetrating the costotransverse joint and the ventral cortex of the rib. Under direct visualization of the costotransverse joint, the drill bit was directed parallel to the sagittal plane and toward the upper portion of the rib. Measurements included the screw path length and sagittal angulation. Also, the distance between the superior borders of the transverse process and the tubercle of the rib and the anatomic relationship of the drill bit exit to the intercostal vessels and nerves were evaluated. The maximum length of the screw path was found at T1 (19.7 mm), whereas the minimum length was noted at T4-T5 (13.9 mm). This value decreased gradually from T1 to T4-T5, and slightly increased to T10. The larger sagittal angles of the screw path were found at the levels of T1-T4 (78-86 degrees ), whereas the smaller were noted at the levels below T5 (53-61 degrees ). The mean distance between the superior borders of the transverse process and the tubercle of the rib was smaller at T1-T5 (0.2-0.4 mm), and significantly increased to T8 (5. 1 mm), and then slightly decreased to T10. The variation of this parameter was remarkable. All of the exit points for the drill bit were located in the upper half of the rib, and away from the intercostal vessels. The ideal screw orientation is parallel to the sagittal plane, and angled 80-90 degrees relative to the

  17. An anatomic study of the effect of proximal interphalangeal joint motion on the tension of the extensor tendon in zone Ⅰ and Ⅱ%近指间关节活动对伸肌腱Ⅰ~Ⅱ区张力影响的解剖学研究

    Institute of Scientific and Technical Information of China (English)

    孙文弢; 张文龙

    2016-01-01

    目的 通过对新鲜标本伸肌腱解剖测量,探讨近指间关节(PIPJ)活动对伸肌腱Ⅰ~Ⅱ区张力的影响.方法取上肢标本示、中、环、小指各10指,分别测量各指在PIPJ伸直0°位、屈曲45°位和屈曲90°位时,远指间关节(DIPJ)的最大被动屈曲角度.显露Ⅰ~Ⅱ区伸肌腱,固定DIPJ于伸直0°位,横向切断伸肌腱末端,制作锤状指模型.克氏针垂直中节指骨颈部进针穿透指骨,记号笔平行克氏针于Ⅰ~Ⅱ区伸肌腱上做标记,测量肌腱滑动距离.取PIPJ关节伸直0°位和屈曲90°位,分别测量伸肌腱断端间隙大小及肌腱的滑动距离.结果共40指结果显示,PIPJ伸直时被动屈曲DIPJ最大角度较PIPJ屈曲时减少;PIPJ处于伸直0°位时,Ⅰ~Ⅱ区伸肌腱末端断端处间隙大小为(0.43±0.07)mm,当屈曲PIPJ至90°位时,近侧断端向远侧滑移,平均滑移距离为(0.76±0.07)mm.结论PIPJ于伸直0°位时伸肌腱Ⅰ~Ⅱ区为最大张力,屈曲PIPJ可使Ⅰ~Ⅱ区张力减小.%Objective To investigate the effect of proximal interphalangeal joint (PIPJ) motion on the tension of the extensor tendon in zone Ⅰ and Ⅱ.Methods The maximum passive flexion angles of the distal interphalangeal joint (DIPJ) of the index,middle,ring and little fingers were measured in 10 fresh cadaver hands with the PIPJ flexed at 0,45° and 90°.An incision was made over the dorsum of the DIPJ to expose the extensor tendon in zone Ⅰ and Ⅱ.A mallet finger was created by incising the extensor tendon transversely at the level of the DIPJ while the DIPJ was fixed in extension position.A Kirschner wire was inserted through and perpendicular to the middle phalangeal neck as a landmark.Parallel to this land mark,extensor tendon in zone Ⅰ and Ⅱ was marked and its relative distance to the landmark was measured as the gliding distance of the extensor.The broadest gap between the tendon edges and the tendon gliding distance were recorded while the PIPJ was

  18. Acromioclavicular joint injuries: diagnosis and management.

    Science.gov (United States)

    Simovitch, Ryan; Sanders, Brett; Ozbaydar, Mehmet; Lavery, Kyle; Warner, Jon J P

    2009-04-01

    Acromioclavicular joint injuries represent nearly half of all athletic shoulder injuries, often resulting from a fall onto the tip of the shoulder with the arm in adduction. Stability of this joint depends on the integrity of the acromioclavicular ligaments and capsule as well as the coracoclavicular ligaments and the trapezius and deltoid muscles. Along with clinical examination for tenderness and instability, radiographic examination is critical in the evaluation of acromioclavicular joint injuries. Nonsurgical treatment is indicated for type I and II injuries; surgery is almost always recommended for type IV, V, and VI injuries. Management of type III injuries remains controversial, with nonsurgical treatment favored in most instances and reconstruction of the acromioclavicular joint reserved for symptomatic instability. Recommended techniques for stabilization in cases of acute and late symptomatic instability include screw fixation of the coracoid process to the clavicle, coracoacromial ligament transfer, and coracoclavicular ligament reconstruction. Biomechanical studies have demonstrated that anatomic acromioclavicular joint reconstruction is the most effective treatment for persistent instability.

  19. Transarticular invasion of the sacroiliac joints by malignant pelvic bone tumors

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hwang Woo; Huh, Jin Do; Kim, Seong Min; Cho, Young Duk [College of Medicine, Kosin Univ., Pusan (Korea, Republic of); Cho, Kil Ho [College of Medicine, Yeungnam Univ., Daegu (Korea, Republic of)

    2002-03-01

    To describe modes of transarticular invasion, with reference to the size and location of a tumor, the anatomic characteristics of invaded cartilage,and the existence of ankylosis in SI joint. Eleven histologically confirmed malignant pelvic bone tumors involving transarticular invasion of sacroiliac joints, were retrospectively analysed. Transarticular invasion of a joint was defined as involvement of its opposing bones. The anatomic site and size of the tumors were analysed, and invaded sacroiliac joint was divided into upper, middle and lower parts on the basis of the anatomic characteristics of the intervening cartilage: synovial hyaline or fibrous ligamentous. the existence of ankylosis was determined, and transarticular invasion directly across a joint was classified as direct invasion. Extension of tumors around a joint from its periphery to the opposing bone were considered as indirect invasion. All tumors were located near the sacroiliac joint, eight at the ilium and three at the sacrum. Six invasions were indirect and five were direct. Average tumor area was larger in indirect cases than in direct: 191.8 cm{sup 2} vs. 69.6 cm{sup 2}. In all indirect invasions, a huge soft tissue mass abutted onto the peripheral portion of the sacroiliac joint. In five of six cases of indirect transarticular invasion, the upper part of the joint posteriorly located fibrous ligamentous cartilage. In the other, the lower part was invaded, and this involved a detour around the joint space, avoiding the invasion of intervening cartilage. Ankylosis occurred in one of the indirect cases. Among the five cases of direct invasion, there was invasion of the posteriorly located ligamentous fibrous cartilage in three without ankylosis. In the other two cases, involving ankylosis, the synovial hyaline cartilage was invaded directly at the lower part of the joint. Transarticular invasions of sacroiliac joint via fibrous cartilage are most common. Ankylosis of the sacroiliac joint

  20. Temporomandibular joint: a methodology of magnetic resonance imaging 3-D reconstruction.

    Science.gov (United States)

    Chirani, Reza Arbab; Jacq, Jean-José; Meriot, Philippe; Roux, Christian

    2004-06-01

    The aim of this study was to develop a new method for the 3-dimensional reconstruction of the temporomandibular joint (TMJ) images by means of magnetic resonance imaging (MRI). In a preliminary study, this modality of 3-D representation was tested to evaluate the joint motion. Sagittal MRI slices were obtained from a healthy subject. Acquisitions were realized by a spin-echo sequence, with a proton-density weighting and a 2-mm slice thickness. A 3-D reconstruction of the TMJ images was performed. Three-dimensional representations of the temporomandibular joint were obtained. The depiction of the principal anatomical elements of this joint was realized. A study of TMJ dynamics was also carried out. In this case, movements of the right and left disks and condyles were measured. This 3-D reconstruction methodology allowed a more understandable anatomical description than 2-D images of the TMJ and offered possibilities for joint functional analysis. Copyright 2004 Elsevier Inc.

  1. [Surgical treatment of temporomandibular joint ankylosis].

    Science.gov (United States)

    Worsaae, N; Hjørting-Hansen, E; Jensen, B; Seidler, B; Praetorius, F

    1992-09-14

    Surgical treatment of temporo-mandibular joint (TMJ) ankylosis may be a particularly difficult procedure due to unfavourable anatomic configurations and the proximity of vital structures. Postoperatively, it is followed by an often long and painful period of physiotherapy. The results of treatment of eight patients with TMJ ankylosis are reported. Different methods were used according to age of the patient and the extent of the ankylotic changes. The importance of early treatment is emphasized. This results in less extensive surgery and reduces secondary growth anomalies of the jaws.

  2. Variability of acorn anatomical characteristics in Quercus robur L. genotypes

    Directory of Open Access Journals (Sweden)

    Nikolić Nataša P.

    2010-01-01

    Full Text Available The aim of this study was to examine variability of acorn anatomical characteristics in seventeen Quercus robur L. genotypes. Acorns were collected in clonal seed orchard Banov Brod (Srem, Vojvodina, Serbia. Microscopic measurements were done for pericarp (total thickness, thickness of exocarp and mesocarp, seed coat (total thickness, thickness of outer epidermis, parenchyma, and inner epidermis, and embryo axis (diameter, thickness of cortical region, and diameter of stellar zone. Obtained results revealed certain divergence between genotypes. The thickness of pericarp varied from 418 to 559 mm (genotypes 20 and 22, respectively. On average, the participation of exocarp in the total thickness of pericarp was 36.3%, of mesocarp 61.0%, while of endocarp 2.6%. The thickness of seed coat for individual genotypes ranged from 71 mm (genotype 28 to 157 mm (genotype 38. In addition, anatomic parameters of embryo axis varied among studied genotypes. The lowest cortical zone thickness and stellar zone diameter were measured in genotype 40, while the highest values in genotype 33.

  3. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2001-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Neil Calder, Mrs Sudeshna Datta Cockerill, Mrs Andrée Fontbonne, Mrs Moniek Laurent and Mr Ulrich Liptow with regard to membership in the Pension Fund under the period with a Paid Associate contract, appeals dealt with on a collective basis. As the appellants have not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 10 to 31 August 2001.

  4. ANATOMIC RESEARCH OF SUPERIOR CLUNIAL NERVE TRAUMA

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    In order to find the mechanism of superior clunial nerve (SCN) trauma, we dissected and revealed SCN from 12 corpses (24 sides). Combining 100 sides of SCN trauma, we inspected the course of SCN, the relation between SCN and it's neighbour tissues with the situation of SCN when being subjected to force. We found that the following special anatomic characteristics and mechanical elements such as the course of SCN, it's turning angles, the bony fibrous tube at the iliac crest, the posterior layer of the lumbodorsal fascia and SCN neighbour adipose tissue, are the causes of external force inducing SCN trauma. The anatomic revealment is the guidance of SCN trauma treatment with edged needle.

  5. An inferior alveolar intraneural cyst: a case example and an anatomical explanation to support the articular theory within cranial nerves.

    Science.gov (United States)

    Capek, Stepan; Koutlas, Ioannis G; Strasia, Rhys P; Amrami, Kimberly K; Spinner, Robert J

    2015-06-01

    The authors describe the case of an intraneural ganglion cyst involving a cranial nerve (V3), which was found to have a joint connection in support of an articular origin within the cranial nerves. An inferior alveolar intraneural cyst was incidentally discovered on a plain radiograph prior to edentulation. It was resected from within the mandibular canal with no joint connection perceived at surgery. Histologically, the cyst was confirmed to be an intraneural ganglion cyst. Reinterpretation of the preoperative CT scan showed the cyst arising from the temporomandibular joint. This case is consistent with the articular (synovial) theory of intraneural ganglion cysts. An anatomical explanation and potential joint connection are provided for this case as well as several other cases of intraneural cysts in the literature, and thus unifying cranial nerve involvement with accepted concepts of intraneural ganglion cyst formation and propagation.

  6. The Joint Narrative: Describing the Future Environment and Joint Operations

    Science.gov (United States)

    2009-01-01

    existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding...forces. Military procurement programs that take decades may be obso - lesced in an afternoon by new technological innovations. Meanwhile, faraway...problem that has been set out. It is the Big How, the “concept of the concept.” In the case of the CCJO, it is a single concept for how joint forces

  7. Anatomical characteristics of Turkish steno-endemic Origanum leptocladum Boiss. (Lamiaceae

    Directory of Open Access Journals (Sweden)

    Süleyman Doğu

    2013-04-01

    Full Text Available Origanum leptocladum Boiss. is an endemic East Mediterranean element, naturally growing only in Ermenek district of Karaman province in Turkey. The aim of this study is to determine anatomical features of the species. The study materials were collected from Karaman-Ermenek in 2009 and then preserved in 70 % alcohol. O. leptocladum generally exhibits the anatomical feaures of the family Lamiaceae. Hovewer, herbaceaus stem is weakly-rectangle shaped or tends to be circular, the collenchymatic tissue at the corner of the stem and scleranchymatic pericycle around the vascular tissue are weakly-developed. The most striking anatomical feature is that leaf lamina is dorsiventral in the region near to midvein, but equifacial out of the midvein. According to the results, while the stomata are of mesomorphic type on the leaf surfaces, O. leptocladum has xeromorphic characters such as palisade richness in mesophyll, the occurrence of rich scleranchymatic tissue in midvein and cuticle thickness on leaf surface.

  8. ANATOMICAL COMPARISON OF POPULAR BRACATINGA (Mimosa scabrella Bentham VARIETIES OF WOOD

    Directory of Open Access Journals (Sweden)

    Fernando José Fabrowski

    2010-08-01

    Full Text Available The main objective of this research was to compare anatomical wood characteristics of the popular varieties of Mimosa scabrella Bentham known as bracatinga-branca, bracatinga-vermelha and bracatinga-argentina. The material  used in this work was collected from 6 to 7 years old trees of the popular varieties from areas located in Colombo municipality, State of Paraná, owned by Embrapa Florestas. Botanic for anatomical characterization of wood material was identified and described. Results did not show differences of anatomical characteristics between the bracatinga-branca and bracatinga-vermelha. The bracatinga-branca and bracatinga-vermelha showed statistically differences in relation to bracatinga-argentina to average values in pores tangential diameter, pores quantity per square mm, vessel elements individual length, axial parenchyma cells diameter, unisseriate and multisseriate rays width. In conclusion, the observations contribute to a better understanding of the differences showed by the popular varieties.

  9. Effect of anatomical and chemical structure in the permeability of "Amapá" wood

    Directory of Open Access Journals (Sweden)

    Edy Eime Pereira Baraúna

    2014-12-01

    Full Text Available This paper aimed to study the permeability to air and liquid, in the longitudinal direction of "amapá" wood (Brosimum parinarioides Ducke, originating from the Amazon Forest. Furthermore, the influence of anatomical and chemical characteristics in the permeability of the wood was investigated. For this study, samples were collected from three trees, in the state of Pará, Brazil, and submitted to permeability test, anatomical characterization, and chemical analyses. The permeability to the air of the "amapá" wood was estimated at 63.7.10-9 m3.[m.(N.m-2.s]-1 and to the liquid was 2.07.10-9 m3.[m.(N.m-2.s]-1. There were low correlations between air and liquid permeability and the anatomical features.

  10. Anatomical MRI with an atomic magnetometer.

    Science.gov (United States)

    Savukov, I; Karaulanov, T

    2013-06-01

    Ultra-low field (ULF) MRI is a promising method for inexpensive medical imaging with various additional advantages over conventional instruments such as low weight, low power, portability, absence of artifacts from metals, and high contrast. Anatomical ULF MRI has been successfully implemented with SQUIDs, but SQUIDs have the drawback of a cryogen requirement. Atomic magnetometers have sensitivity comparable to SQUIDs and can be in principle used for ULF MRI to replace SQUIDs. Unfortunately some problems exist due to the sensitivity of atomic magnetometers to a magnetic field and gradients. At low frequency, noise is also substantial and a shielded room is needed for improving sensitivity. In this paper, we show that at 85 kHz, the atomic magnetometer can be used to obtain anatomical images. This is the first demonstration of any use of atomic magnetometers for anatomical MRI. The demonstrated resolution is 1.1 mm×1.4 mm in about 6 min of acquisition with SNR of 10. Some applications of the method are discussed. We discuss several measures to increase the sensitivity to reach a resolution 1 mm×1 mm.

  11. Exploring brain function from anatomical connectivity

    Directory of Open Access Journals (Sweden)

    Gorka eZamora-López

    2011-06-01

    Full Text Available The intrinsic relationship between the architecture of the brain and the range of sensory and behavioral phenomena it produces is a relevant question in neuroscience. Here, we review recent knowledge gained on the architecture of the anatomical connectivity by means of complex network analysis. It has been found that corticocortical networks display a few prominent characteristics: (i modular organization, (ii abundant alternative processing paths and (iii the presence of highly connected hubs. Additionally, we present a novel classification of cortical areas of the cat according to the role they play in multisensory connectivity. All these properties represent an ideal anatomical substrate supporting rich dynamical behaviors, as-well-as facilitating the capacity of the brain to process sensory information of different modalities segregated and to integrate them towards a comprehensive perception of the real world. The result here exposed are mainly based in anatomical data of cats’ brain, but we show how further observations suggest that, from worms to humans, the nervous system of all animals might share fundamental principles of organization.

  12. Anatomical MRI with an atomic magnetometer

    CERN Document Server

    Savukov, I

    2012-01-01

    Ultra-low field (ULF) MRI is a promising method for inexpensive medical imaging with various additional advantages over conventional instruments such as low weight, low power, portability, absence of artifacts from metals, and high contrast. Anatomical ULF MRI has been successfully implemented with SQUIDs, but SQUIDs have the drawback of cryogen requirement. Atomic magnetometers have sensitivity comparable to SQUIDs and can be in principle used for ULF MRI to replace SQUIDs. Unfortunately some problems exist due to the sensitivity of atomic magnetometers to magnetic field and gradients. At low frequency, noise is also substantial and a shielded room is needed for improving sensitivity. In this paper, we show that at 85 kHz, the atomic magnetometer can be used to obtain anatomical images. This is the first demonstration of any use of atomic magnetometers for anatomical MRI. The demonstrated resolution is 1.1x1.4 mm2 in about six minutes of acquisition with SNR of 10. Some applications of the method are discuss...

  13. Anatomic and functional leg-length inequality: A review and recommendation for clinical decision-making. Part I, anatomic leg-length inequality: prevalence, magnitude, effects and clinical significance

    Directory of Open Access Journals (Sweden)

    Knutson Gary A

    2005-07-01

    Full Text Available Abstract Background Leg-length inequality is most often divided into two groups: anatomic and functional. Part I of this review analyses data collected on anatomic leg-length inequality relative to prevalence, magnitude, effects and clinical significance. Part II examines the functional "short leg" including anatomic-functional relationships, and provides an outline for clinical decision-making. Methods Online database – Medline, CINAHL and MANTIS – and library searches for the time frame of 1970–2005 were done using the term "leg-length inequality". Results and Discussion Using data on leg-length inequality obtained by accurate and reliable x-ray methods, the prevalence of anatomic inequality was found to be 90%, the mean magnitude of anatomic inequality was 5.2 mm (SD 4.1. The evidence suggests that, for most people, anatomic leg-length inequality does not appear to be clinically significant until the magnitude reaches ~ 20 mm (~3/4". Conclusion Anatomic leg-length inequality is near universal, but the average magnitude is small and not likely to be clinically significant.

  14. The knee in full flexion: an anatomical study.

    Science.gov (United States)

    Pinskerova, V; Samuelson, K M; Stammers, J; Maruthainar, K; Sosna, A; Freeman, M A R

    2009-06-01

    There has been only one limited report dating from 1941 using dissection which has described the tibiofemoral joint between 120 degrees and 160 degrees of flexion despite the relevance of this arc to total knee replacement. We now provide a full description having examined one living and eight cadaver knees using MRI, dissection and previously published cryosections in one knee. In the range of flexion from 120 degrees to 160 degrees the flexion facet centre of the medial femoral condyle moves back 5 mm and rises up on to the posterior horn of the medial meniscus. At 160 degrees the posterior horn is compressed in a synovial recess between the femoral cortex and the tibia. This limits flexion. The lateral femoral condyle also rolls back with the posterior horn of the lateral meniscus moving with the condyle. Both move down over the posterior tibia at 160 degrees of flexion. Neither the events between 120 degrees and 160 degrees nor the anatomy at 160 degrees could result from a continuation of the kinematics up to 120 degrees . Therefore hyperflexion is a separate arc. The anatomical and functional features of this arc suggest that it would be difficult to design an implant for total knee replacement giving physiological movement from 0 degrees to 160 degrees .

  15. Arthroscopically assisted anatomical coracoclavicular ligament reconstruction using tendon graft.

    Science.gov (United States)

    Yoo, Yon-Sik; Seo, Young-Jin; Noh, Kyu-Cheol; Patro, Bishu Prasad; Kim, Do-Young

    2011-07-01

    We describe a method of arthroscopically assisted, mini-open, anatomical reconstruction of the coracoclavicular ligament. This method restores both components of the native ligament with the aim of achieving maximum stability with minimal disruption of the normal anatomy. Using the same principles of ligament reconstruction that are employed in other joints, transosseous tunnels are created following the native footprints of the conoid and trapezoid ligaments and an autologous graft is fixed using a PEEK screw. Adequate healing of the ligament occurs within the bone, to prevent stress risers with an appropriate working length. This procedure is unique, as it replaces the torn ligament with a natural substitute, in the appropriate location, through a minimally invasive procedure. This technique would be suitable for treatment of patients with either grade III or V acute acromioclavicular dislocations. Clinical outcomes for the first 13 consecutive patients treated with this procedure are reported, revealing excellent satisfaction rates with a Constant score of 96.6 at final follow-up.

  16. Anatomical Characteristics and Biomechanical Properties of the Oblique Popliteal Ligament

    Science.gov (United States)

    Wu, Xiang-Dong; Yu, Jin-Hui; Zou, Tao; Wang, Wei; LaPrade, Robert F.; Huang, Wei; Sun, Shan-Quan

    2017-01-01

    This anatomical study sought to investigate the morphological characteristics and biomechanical properties of the oblique popliteal ligament (OPL). Embalmed cadaveric knees were used for the study. The OPL and its surrounding structures were dissected; its morphology was carefully observed, analyzed and measured; its biomechanical properties were investigated. The origins and insertions of the OPL were relatively similar, but its overall shape was variable. The OPL had two origins: one originated from the posterior surface of the posteromedial tibia condyle, merged with fibers from the semimembranosus tendon, the other originated from the posteromedial part of the capsule. The two origins converged and coursed superolaterally, then attached to the fabella or to the tendon of the lateral head of the gastrocnemius and blended with the posterolateral joint capsule. The OPL was classified into Band-shaped, Y-shaped, Z-shaped, Trident-shaped, and Complex-shaped configurations. The mean length, width, and thickness of the OPL were 39.54, 22.59, and 1.44 mm, respectively. When an external rotation torque (18 N·m) was applied both before and after the OPL was sectioned, external rotation increased by 8.4° (P = 0.0043) on average. The OPL was found to have a significant role in preventing excessive external rotation and hyperextension of the knee. PMID:28205540

  17. Automatic detection of anatomical landmarks in uterine cervix images.

    Science.gov (United States)

    Greenspan, Hayit; Gordon, Shiri; Zimmerman, Gali; Lotenberg, Shelly; Jeronimo, Jose; Antani, Sameer; Long, Rodney

    2009-03-01

    The work focuses on a unique medical repository of digital cervicographic images ("Cervigrams") collected by the National Cancer Institute (NCI) in longitudinal multiyear studies. NCI, together with the National Library of Medicine (NLM), is developing a unique web-accessible database of the digitized cervix images to study the evolution of lesions related to cervical cancer. Tools are needed for automated analysis of the cervigram content to support cancer research. We present a multistage scheme for segmenting and labeling regions of anatomical interest within the cervigrams. In particular, we focus on the extraction of the cervix region and fine detection of the cervix boundary; specular reflection is eliminated as an important preprocessing step; in addition, the entrance to the endocervical canal (the "os"), is detected. Segmentation results are evaluated on three image sets of cervigrams that were manually labeled by NCI experts.

  18. Introducing International Journal of Anatomical Variations

    Directory of Open Access Journals (Sweden)

    Tunali S

    2008-06-01

    Full Text Available Welcome to International Journal of Anatomical Variations (IJAV - an annual journal of anatomical variations and clinical anatomy case reports. After having a notable experience for eight years in NEUROANATOMY, we are pleased to introduce you IJAV. We are eventually announcing our new journal after three years of feasibility and background study period. We hope that IJAV will fill in the gap in anatomy journals’ bunch. IJAV is an annual, open access journal having electronic version only. Despite of unavailability of a budget for publishing IJAV, the evaluation of submissions and access to the full text articles is totally free of charge.Our vision for IJAV is to constitute an online compendium for anatomical variations in gross, radiological and surgical anatomy, neuroanatomy and case reports in clinical anatomy. We believe that cases have an important role in clinical anatomy education. In this aspect, we aim to serve as an open source of case reports. We hope that IJAV will be cited in most of the case reports related to clinical anatomy and anatomical variations in near future.In NEUROANATOMY, we encouraged the submission of case reports in the area of neuroanatomy. Whereas in IJAV, besides neuroanatomy, we will consider case reports in any area related to human anatomy. The scope of IJAV will encompass any anatomical variations in gross, radiological and surgical anatomy. Case reports in clinical anatomy are also welcome.All submitted articles will be peer-reviewed. No processing fee will be charged from authors. One of the most important features of IJAV will be speedy review and rapid publication. We strive to publish an accepted manuscript within three weeks of initial submission. Our young and dynamic Scientific Advisory Board will achieve this objective.A few remarks about our logo and page design: Prof. Dr. M. Mustafa ALDUR designed our logo, being inspired by a quadricuspid aortic valve case, reported by Francesco FORMICA et al

  19. [Development and validation of a finite element model of human knee joint for dynamic analysis].

    Science.gov (United States)

    Li, Haiyan; Gu, Yulong; Ruan, Shijie; Cui, Shihai

    2012-02-01

    Based on the biomechanical response of human knee joint to a front impact in occupants accidents, a finite element (FE) model of human knee joint was developed by using computer simulation technique for impacting. The model consists of human anatomical structure, including femoral condyle, tibia condyle, fibular small head, patellar, cartilage, meniscus and primary ligament. By comparing the results of the FE model with experiments of the knee joint in axial load conditions, the validation of the model was verified. Furthermore, this study provides data for the mechanical of human knee joint injury, and is helpful for the design and optimization of the vehicle protective devices.

  20. Fluoroscopy-Guided Sacroiliac Intraarticular Injection via the Middle Portion of the Joint.

    Science.gov (United States)

    Kurosawa, Daisuke; Murakami, Eiichi; Aizawa, Toshimi

    2016-12-30

    OBJECTIVE : Sacroiliac intraarticular injection is necessary to confirm sacroiliac joint (SIJ) pain and is usually performed via the caudal one-third portion of the joint. However, this is occasionally impossible for anatomical reasons, and the success rate is low in clinical settings. We describe a technique via the middle portion of the joint. DESIGN : Observational study. SUBJECTS : Enrolled were 69 consecutive patients (27 men and 42 women, with an average age of 53 years) in whom the middle portion of 100 joints was targeted.

  1. MP Joint Arthritis

    Science.gov (United States)

    ... Find a Hand Surgeon Home Anatomy MP Joint Arthritis Email to a friend * required fields From * To * ... important for both pinching and gripping. MP joint arthritis is most common in the thumb and index ...

  2. Culture - joint fluid

    Science.gov (United States)

    Joint fluid culture ... fungi, or viruses grow. This is called a culture. If these germs are detected, other tests may ... is no special preparation needed for the lab culture. How to prepare for the removal of joint ...

  3. Sacroiliac joint pain - aftercare

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000610.htm Sacroiliac joint pain - aftercare To use the sharing features on this page, please enable JavaScript. The sacroiliac joint (SIJ) is a term used to describe the ...

  4. Knee joint replacement - slideshow

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/presentations/100088.htm Knee joint replacement - series—Normal anatomy To use the ... to slide 4 out of 4 Overview The knee is a complex joint. It contains the distal ...

  5. 1. 5 MRT of the hyaline articular cartilage of the knee joint

    Energy Technology Data Exchange (ETDEWEB)

    Adam, G.; Bohndorf, K.; Krasny, R.; Guenther, R.W.; Prescher, A.

    1988-06-01

    MRI is a new method for imaging the knee joint. There is still some uncertainty regarding the extent and the signal from hyaline articular cartilage. MRI images were therefore compared with anatomical and histological preparations of the knee joint and the difference between MRI and the anatomical sections have been determined. It was shown that demonstration of hyaline cartilage was obscured by an artifact. Further investigations are required to determine the cause of this artifact and to achieve accurate imaging of hyaline cartilage by MRI.

  6. The role of the lateral pterygoid muscle in the temporomandibular joint disorders

    Directory of Open Access Journals (Sweden)

    Maria ANTONOPOULOU

    2013-12-01

    Full Text Available Being the only muscle directrly related to the temporomandibular joint (TMJ, the lateral pterygoid muscle (LPM has been the subject of many studies seeking to understand the problems of this joint. Many anatomical studies have been carried out on cadavers, in order to specifically examine the attachment of the LPM to the TMJ. These studies have led to different results and conclusions. Aim: The present study aims to provide a review of the recent literature and draw conclusions on the impact that the anatomical position of the LPM attachment can have on TMJ dysfunction.

  7. Managing Joint Production Motivation

    DEFF Research Database (Denmark)

    Lindenberg, Siegwart; Foss, Nicolai Juul

    2011-01-01

    We contribute to the microfoundations of organizational performance by proffering the construct of joint production motivation. Under such motivational conditions individuals see themselves as part of a joint endeavor, each with his or her own roles and responsibilities; generate shared represent...... representations of actions and tasks; cognitively coordinate cooperation; and choose their own behaviors in terms of joint goals. Using goal-framing theory, we explain how motivation for joint production can be managed by cognitive/symbolic management and organizational design....

  8. Acromioclavicular joint reconstruction using a tendon graft: a biomechanical study comparing a novel “sutured throughout” tendon graft to a standard tendon graft

    Directory of Open Access Journals (Sweden)

    Naziri Qais

    2016-01-01

    Full Text Available Background: With a recurrence rate of over 30%, techniques that offer stronger acromioclavicular (AC joint reconstruction through increased graft strength may provide longevity. The purpose of our study was to determine the biomechanical strength of a novel tendon graft sutured throughout compared to a native tendon graft in Grade 3 anatomical AC joint reconstruction. Methods: For this in vitro experiment, nine paired (n = 18 embalmed cadaveric AC joints of three males and six females (age 86 years, range 51–94 years were harvested. Anatomic repair with fresh bovine Achilles tendon grafts without bone block was simulated. Specimens were divided into two groups; with group 1 using grafts with ultra-high molecular-weight polyethylene (UHMWPE suture ran throughout the entire length. In group 2, reconstruction with only native allografts was performed. The distal scapula and humerus were casted in epoxy compound and mounted on the mechanical testing machine. Tensile tests were performed using a mechanical testing machine at the rate of 50 mm/min. Maximum load and displacement to failure were collected. Results: The average load to failure was significantly higher for group 1 compared to group 2, with mean values of 437.5 N ± 160.7 N and 94.4 N ± 43.6 N, (p = 0.001. The average displacement to failure was not significantly different, with 29.7 mm ± 10.6 mm in group 1 and 25 mm ± 9.1 mm in group 2 (p = 0.25. Conclusion: We conclude that a UHMWPE suture reinforced graft can provide a 3.6 times stronger AC joint reconstruction compared to a native graft.

  9. Acromioclavicular joint reconstruction using a tendon graft: a biomechanical study comparing a novel “sutured throughout” tendon graft to a standard tendon graft

    Science.gov (United States)

    Naziri, Qais; Williams, Nadine; Hayes, Westley; Kapadia, Bhaveen H.; Chatterjee, Dipal; Urban, William P.

    2016-01-01

    Background: With a recurrence rate of over 30%, techniques that offer stronger acromioclavicular (AC) joint reconstruction through increased graft strength may provide longevity. The purpose of our study was to determine the biomechanical strength of a novel tendon graft sutured throughout compared to a native tendon graft in Grade 3 anatomical AC joint reconstruction. Methods: For this in vitro experiment, nine paired (n = 18) embalmed cadaveric AC joints of three males and six females (age 86 years, range 51–94 years) were harvested. Anatomic repair with fresh bovine Achilles tendon grafts without bone block was simulated. Specimens were divided into two groups; with group 1 using grafts with ultra-high molecular-weight polyethylene (UHMWPE) suture ran throughout the entire length. In group 2, reconstruction with only native allografts was performed. The distal scapula and humerus were casted in epoxy compound and mounted on the mechanical testing machine. Tensile tests were performed using a mechanical testing machine at the rate of 50 mm/min. Maximum load and displacement to failure were collected. Results: The average load to failure was significantly higher for group 1 compared to group 2, with mean values of 437.5 N ± 160.7 N and 94.4 N ± 43.6 N, (p = 0.001). The average displacement to failure was not significantly different, with 29.7 mm ± 10.6 mm in group 1 and 25 mm ± 9.1 mm in group 2 (p = 0.25). Conclusion: We conclude that a UHMWPE suture reinforced graft can provide a 3.6 times stronger AC joint reconstruction compared to a native graft. PMID:27163106

  10. The anatomical diaspora: evidence of early American anatomical traditions in North Dakota.

    Science.gov (United States)

    Stubblefield, Phoebe R

    2011-09-01

    The current focus in forensic anthropology on increasing scientific certainty in ancestry determination reinforces the need to examine the ancestry of skeletal remains used for osteology instruction. Human skeletal remains were discovered on the University of North Dakota campus in 2007. After recovery, the osteological examination resulted in a profile for a 33- to 46-year-old woman of African descent with stature ranging from 56.3 to 61.0 in. The pattern of postmortem damage indicated that the remains had been prepared for use as an anatomical teaching specimen. Review of the American history of anatomical teaching revealed a preference for Black subjects, which apparently extended to states like North Dakota despite extremely low resident populations of people of African descent. This study emphasizes the need to examine the ancestry of older teaching specimens that lack provenience, rather than assuming they are derived from typical (i.e., Indian) sources of anatomical material.

  11. Radiological analysis on femoral tunnel positioning between isometric and anatomical reconstructions of the anterior cruciate ligament,

    Directory of Open Access Journals (Sweden)

    Rodrigo Barreiros Vieira

    2014-04-01

    Full Text Available OBJECTIVE: the aim of this study was to radiologically evaluate the femoral tunnel position in anterior cruciate ligament (ACL reconstructions using the isometric and anatomical techniques.METHODS: a prospective analytical study was conducted on patients undergoing ACL reconstruction by means of the isometric and anatomical techniques, using grafts from the knee flexor tendons or patellar tendon. Twenty-eight patients were recruited during the immediate postoperative period, at the knee surgery outpatient clinic of FCMMG-HUSJ. Radiographs of the operated knee were produced in anteroposterior (AP view with the patient standing on both feet and in lateral view with 30◦ of flexion. The lines were traced out and the distances and angles were measured on the lateral radiograph to evaluate the sagittal plane. The distance from the center of the screw to the posterior cortical bone of the lateral condyle was measured and divided by the Blumensaat line. In relation to the height of the screw, the distance from the center of the screw to the joint surface of the lateral condyle of the knee was measured. On the AP radiograph, evaluating the coronal plane, the angle between the anatomical axis of the femur and a line traced at the center of the screw was measured.RESULTS: with regard to the pmeasurement (posteriorization of the interference screw, the tests showed that the p-value (0.4213 was greater than the significance level used (0.05; the null hypothesis was not rejected and it could be stated that there was no statistically significant difference between the anatomical and isometric techniques. With regard to the H measurement (height of the screw in relation to the lower cortical bone of the knee, the p-value observed (0.0006 was less than the significance level used (0.05; the null hypothesis was rejected and it could be stated that there was a statistically significant difference between the anatomical and isometric techniques. It can be

  12. Reliability of Tubular Joints

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Thoft-Christensen, Palle

    of the test is partly to obtain empirical data for the ultimate load-carrying capacity of tubular T-joints and partly to obtain some experience in performing tests with tubular joints. It is well known that tubular joints are usually designed in offshore engineering on the basis of empirical formulas obtained...

  13. Pure Laparoscopic Liver Resection for Malignant Liver Tumor: Anatomic Resection Versus Nonanatomic Resection

    Institute of Scientific and Technical Information of China (English)

    Ya-Xi Chen; Dian-Rong Xiu; Chun-Hui Yuan; Bin Jiang; Zhao-Lai Ma

    2016-01-01

    Background: Laparoscopic liver resection (LLR) has been considered to be safe and feasible.However, few studies focused on the comparison between the anatomic and nonanatomic LLR.Therefore, the purpose of this study was to compare the perioperative factors and outcomes of the anatomic and nonanatomic LLR, especially the area of liver parenchymal transection and blood loss per unit area.Methods: In this study, surgical and oncological data of patients underwent pure LLR procedures for malignant liver tumor were prospectively collected.Blood loss per unit area of liver parenchymal transection was measured and considered as an important parameter.All procedures were conducted by a single surgeon.Results: During nearly 5 years, 84 patients with malignant liver tumor received a pure LLR procedure were included.Among them, 34 patients received anatomic LLR and 50 received nonanatomic LLR, respectively.Patients of the two groups were similar in terms of demographic features and tumor characteristics, despite the tumor size was significantly larger in the anatomic LLR group than that in the nonanatomic LLR group (4.77 ± 2.57 vs.2.87 ± 2.10 cm, P =0.001).Patients who underwent anatomic resection had longer operation time (364.09 ± 131.22 vs.252.00 ± 135.21 min, P < 0.001) but less blood loss per unit area (7.85 ± 7.17 vs.14.17 ± 10.43 ml/cm2,P =0.018).Nonanatomic LLR was associated with more blood loss when the area of parenchymal transection was equal to the anatomic LLR.No mortality occurred during the hospital stay and 30 days after the operation.Moreover, there was no difference in the incidence of postoperative complications.The disease-free and overall survival rates showed no significant differences between the anatomic LLR and nonanatomic LLR groups.Conclusions: Both anatomic and nonanatomic pure LLR are safe and feasible.Measuring the area ofparenchymal transection is a simple and effective method to estimate the outcomes of the liver resection surgery

  14. Galeazzi fracture with volar dislocation of the distal radioulnar joint.

    Science.gov (United States)

    Kim, Suezie; Ward, James P; Rettig, Michael E

    2012-11-01

    Galeazzi fracture dislocations are fractures of the distal one-third of the radial diaphysis with traumatic disruption of the distal radioulnar joint (DRUJ). This injury results in subluxation or dislocation of the ulnar head. We present a case of a Galeazzi fracture with a volar dislocation of the DRUJ. Open reduction of the DRUJ with Kirschner wire fixation in pronation was necessary to reduce the joint and maintain anatomic alignment. Repair of the triangular fibrocartilage complex was also necessary to maintain stability of the DRUJ.

  15. TOPICAL REVIEW: Anatomical imaging for radiotherapy

    Science.gov (United States)

    Evans, Philip M.

    2008-06-01

    The goal of radiation therapy is to achieve maximal therapeutic benefit expressed in terms of a high probability of local control of disease with minimal side effects. Physically this often equates to the delivery of a high dose of radiation to the tumour or target region whilst maintaining an acceptably low dose to other tissues, particularly those adjacent to the target. Techniques such as intensity modulated radiotherapy (IMRT), stereotactic radiosurgery and computer planned brachytherapy provide the means to calculate the radiation dose delivery to achieve the desired dose distribution. Imaging is an essential tool in all state of the art planning and delivery techniques: (i) to enable planning of the desired treatment, (ii) to verify the treatment is delivered as planned and (iii) to follow-up treatment outcome to monitor that the treatment has had the desired effect. Clinical imaging techniques can be loosely classified into anatomic methods which measure the basic physical characteristics of tissue such as their density and biological imaging techniques which measure functional characteristics such as metabolism. In this review we consider anatomical imaging techniques. Biological imaging is considered in another article. Anatomical imaging is generally used for goals (i) and (ii) above. Computed tomography (CT) has been the mainstay of anatomical treatment planning for many years, enabling some delineation of soft tissue as well as radiation attenuation estimation for dose prediction. Magnetic resonance imaging is fast becoming widespread alongside CT, enabling superior soft-tissue visualization. Traditionally scanning for treatment planning has relied on the use of a single snapshot scan. Recent years have seen the development of techniques such as 4D CT and adaptive radiotherapy (ART). In 4D CT raw data are encoded with phase information and reconstructed to yield a set of scans detailing motion through the breathing, or cardiac, cycle. In ART a set of

  16. Changes in surgical procedures for acromioclavicular joint dislocation over the past 30 years.

    Science.gov (United States)

    Takase, Katsumi; Yamamoto, Kengo

    2013-10-01

    Generally, surgical treatment is recommended for Rockwood type 5 traumatic acromioclavicular joint dislocations. Since 1980, the authors have performed the modified Dewar procedure, the modified Cadenat procedure, and anatomical reconstruction of the coracoclavicular ligaments for this injury. The goal of this study was to determine the ideal surgical procedure for acromioclavicular joint dislocations by comparing these 3 procedures. The modified Dewar procedure was performed on 55 patients (Dewar group), the modified Cadenat procedure was performed on 73 patients (Cadenat group), and anatomical reconstruction of the coracoclavicular ligaments was performed on 11 patients (reconstruction group). According to the UCLA scoring system, therapeutic results averaged 27.3 points in the Dewar group, 28.2 in the Cadenat group, and 28.4 in the reconstruction group. The incidence of residual subluxation or dislocation in the acromioclavicular joint was evaluated at final radiographic follow-up. Subluxation occurred in 21 patients in the Dewar group, 18 in the Cadenat group, and 3 in the reconstruction group. Dislocation occurred in 3 patients in the Dewar group. Osteoarthritic changes in the acromioclavicular joint occurred in 20 patients in the Dewar group, 9 in the Cadenat group, and 1 in the reconstruction group. The modified Cadenat procedure can provide satisfactory therapeutic results and avoid postoperative failure or loss of reduction compared with the modified Dewar procedure. However, the modified Cadenat procedure does not anatomically restore the coracoclavicular ligaments. Anatomic restoration of both coracoclavicular ligaments can best restore acromioclavicular joint function. Copyright 2013, SLACK Incorporated.

  17. Chronic ankle instability: Arthroscopic anatomical repair.

    Science.gov (United States)

    Arroyo-Hernández, M; Mellado-Romero, M; Páramo-Díaz, P; García-Lamas, L; Vilà-Rico, J

    Ankle sprains are one of the most common injuries. Despite appropriate conservative treatment, approximately 20-40% of patients continue to have chronic ankle instability and pain. In 75-80% of cases there is an isolated rupture of the anterior talofibular ligament. A retrospective observational study was conducted on 21 patients surgically treated for chronic ankle instability by means of an arthroscopic anatomical repair, between May 2012 and January 2013. There were 15 men and 6 women, with a mean age of 30.43 years (range 18-48). The mean follow-up was 29 months (range 25-33). All patients were treated by arthroscopic anatomical repair of anterior talofibular ligament. Four (19%) patients were found to have varus hindfoot deformity. Associated injuries were present in 13 (62%) patients. There were 6 cases of osteochondral lesions, 3 cases of posterior ankle impingement syndrome, and 6 cases of peroneal pathology. All these injuries were surgically treated in the same surgical time. A clinical-functional study was performed using the American Orthopaedic Foot and Ankle Society (AOFAS) score. The mean score before surgery was 66.12 (range 60-71), and after surgery it increased up to a mean of 96.95 (range 90-100). All patients were able to return to their previous sport activity within a mean of 21.5 weeks (range 17-28). Complications were found in 3 (14%) patients. Arthroscopic anatomical ligament repair technique has excellent clinical-functional results with a low percentage of complications, and enables patients to return to their previous sport activity within a short period of time. Copyright © 2016 SECOT. Publicado por Elsevier España, S.L.U. All rights reserved.

  18. Constitutional and Anatomical Characteristics of Mature Women

    Institute of Scientific and Technical Information of China (English)

    Vladimir NNikolenko; DmitryBNikityuk; SvetlanaVKlochkova; AnastasiaABahmet

    2015-01-01

    Objective To identify the constitutional and anatomical peculiarities of constitution of women of mature age.Methods There was completed comprehensive anthropometric and bio-electrical survey of 651 mature women ( relative norm) living in the Moscow region .Results The quantitative distribution of women by somatotypological affiliation was revealed;anthropometric and body component composition in representatives of different somatotypes were defined .Conclusion Thus, the performed study revealed and quantiely character-ised the distribution of women according to their constitutional types in the studied population of mature age women living in Moscow region under the relative norm conditions .

  19. Tennis elbow. Anatomical, epidemiological and therapeutic aspects.

    Science.gov (United States)

    Verhaar, J A

    1994-10-01

    Five studies of tennis elbow are presented. Epidemiological studies showed an incidence of tennis elbow between 1 and 2%. The prevalence of tennis elbow in women between 40 and 50 years of age was 10%. Half of the patients with tennis elbow seek medical attention. Local corticosteroid injections were superior to the physiotherapy regime of Cyriax. Release of the common forearm extensor origin resulted in 70% excellent or good results one year after operation and 89% at five years. Anatomical investigations and nerve conduction studies of the Radial Tunnel Syndrome supported the hypothesis that the Lateral Cubital Force Transmission System is involved in the pathogenesis of tennis elbow.

  20. Anatomical considerations to prevent facial nerve injury.

    Science.gov (United States)

    Roostaeian, Jason; Rohrich, Rod J; Stuzin, James M

    2015-05-01

    Injury to the facial nerve during a face lift is a relatively rare but serious complication. A large body of literature has been dedicated toward bettering the understanding of the anatomical course of the facial nerve and the relative danger zones. Most of these prior reports, however, have focused on identifying the location of facial nerve branches based on their trajectory mostly in two dimensions and rarely in three dimensions. Unfortunately, the exact location of the facial nerve relative to palpable or visible facial landmarks is quite variable. Although the precise location of facial nerve branches is variable, its relationship to soft-tissue planes is relatively constant. The focus of this report is to improve understanding of facial soft-tissue anatomy so that safe planes of dissection during surgical undermining may be identified for each branch of the facial nerve. Certain anatomical locations more prone to injury and high-risk patient parameters are further emphasized to help minimize the risk of facial nerve injury during rhytidectomy.

  1. Anatomic Optical Coherence Tomography of Upper Airways

    Science.gov (United States)

    Chin Loy, Anthony; Jing, Joseph; Zhang, Jun; Wang, Yong; Elghobashi, Said; Chen, Zhongping; Wong, Brian J. F.

    The upper airway is a complex and intricate system responsible for respiration, phonation, and deglutition. Obstruction of the upper airways afflicts an estimated 12-18 million Americans. Pharyngeal size and shape are important factors in the pathogenesis of airway obstructions. In addition, nocturnal loss in pharyngeal muscular tone combined with high pharyngeal resistance can lead to collapse of the airway and periodic partial or complete upper airway obstruction. Anatomical optical coherence tomography (OCT) has the potential to provide high-speed three-dimensional tomographic images of the airway lumen without the use of ionizing radiation. In this chapter we describe the methods behind endoscopic OCT imaging and processing to generate full three dimensional anatomical models of the human airway which can be used in conjunction with numerical simulation methods to assess areas of airway obstruction. Combining this structural information with flow dynamic simulations, we can better estimate the site and causes of airway obstruction and better select and design surgery for patients with obstructive sleep apnea.

  2. Retinal vascular tree reconstruction with anatomical realism.

    Science.gov (United States)

    Lin, Kai-Shun; Tsai, Chia-Ling; Tsai, Chih-Hsiangng; Sofka, Michal; Chen, Shih-Jen; Lin, Wei-Yang

    2012-12-01

    Motivated by the goals of automatically extracting vessel segments and constructing retinal vascular trees with anatomical realism, this paper presents and analyses an algorithm that combines vessel segmentation and grouping of the extracted vessel segments. The proposed method aims to restore the topology of the vascular trees with anatomical realism for clinical studies and diagnosis of retinal vascular diseases, which manifest abnormalities in either venous and/or arterial vascular systems. Vessel segments are grouped using extended Kalman filter which takes into account continuities in curvature, width, and intensity changes at the bifurcation or crossover point. At a junction, the proposed method applies the minimum-cost matching algorithm to resolve the conflict in grouping due to error in tracing. The system was trained with 20 images from the DRIVE dataset, and tested using the remaining 20 images. The dataset contained a mixture of normal and pathological images. In addition, six pathological fluorescein angiogram sequences were also included in this study. The results were compared against the groundtruth images provided by a physician, achieving average success rates of 88.79% and 90.09%, respectively.

  3. Dynamic high-resolution US of ankle and midfoot ligaments: normal anatomic structure and imaging technique.

    Science.gov (United States)

    Sconfienza, Luca Maria; Orlandi, Davide; Lacelli, Francesca; Serafini, Giovanni; Silvestri, Enzo

    2015-01-01

    The ankle is the most frequently injured major joint in the body, and ankle sprains are frequently encountered in individuals playing football, basketball, and other team sports, in addition to occurring in the general population. Imaging plays a crucial role in the evaluation of ankle ligaments. Magnetic resonance imaging has been proven to provide excellent evaluation of ligaments around the ankle, with the ability to show associated intraarticular abnormalities, joint effusion, and bone marrow edema. Ultrasonography (US) performed with high-resolution broadband linear-array probes has become increasingly important in the assessment of ligaments around the ankle because it is low cost, fast, readily available, and free of ionizing radiation. US can provide a detailed depiction of normal anatomic structures and is effective for evaluating ligament integrity. In addition, US allows the performance of dynamic maneuvers, which may contribute to increased visibility of normal ligaments and improved detection of tears. In this article, the authors describe the US techniques for evaluation of the ankle and midfoot ligaments and include a brief review of the literature related to their basic anatomic structures and US of these structures. Short video clips showing dynamic maneuvers and dynamic real-time US of ankle and midfoot structures and their principal pathologic patterns are included as supplemental material. Use of a standardized imaging technique may help reduce the intrinsic operator dependence of US. Online supplemental material is available for this article.

  4. A three-dimensional musculoskeletal model for gait analysis. Anatomical variability estimates.

    Science.gov (United States)

    White, S C; Yack, H J; Winter, D A

    1989-01-01

    Three-dimensional coordinates defining the origin and insertion of 40 muscle units, and bony landmarks for osteometric scaling were identified on dry bone specimens. Interspecimen coordinate differences along the anterior-posterior axis of the pelvis and the long bone axes of the pelvis, femur and leg were reduced by scaling but landmark differences along the other axes were not. The coordinates were mapped to living subjects using close-range photogrammetry to locate superficial reference markers. The error of predicting the positions of internal coordinates was assessed by comparing joint centre locations calculated from local axes defining the orientation of segments superior and inferior to a joint. A difference was attributed to: anatomical variability not accounted for by scaling; errors in identifying and placing reference landmarks; the accuracy of locating markers using photogrammetry and error introduced by marker oscillation during movement. Anatomical differences between specimens are one source of error in defining a musculoskeletal model but larger errors are introduced when such models are mapped to living subjects.

  5. Anatomic Anterolateral Ligament Reconstruction of the Knee Leads to Overconstraint at any Fixation Angle

    Science.gov (United States)

    Schon, Jason; Brady, Alex; Moatshe, Gilbert; Cruz, Raphael; Chahla, Jorge; Dornan, Grant; Turnbull, Travis L.; Engebretsen, Lars

    2016-01-01

    Objectives: Anterior cruciate ligament (ACL) tears are one of the most common injuries among athletes. However, the ability to fully restore rotational stability with ACL reconstruction (ACLR) remains a challenge because up to 25% of patients may present with a residual pivot shift following surgery. Advocacy for reconstruction of the anterolateral ligament (ALL) is rapidly increasing because biomechanical studies have reported that the ALL is a significant contributor to internal rotational stability of the knee. Although several graft fixation angles for the anatomic ALL reconstruction (ALLR) have been reported in literature, none have been biomechanically validated. Therefore, the purpose of this study was to assess the effect of ALLR graft fixation angle on knee joint kinematics in the clinically relevant setting of a concomitant ACLR. The goal was to find the optimal knee flexion angle for fixation of the ALLR graft that would most accurately restore native knee kinematics without introducing overconstraint to the knee. It was hypothesized that all fixation angles would significantly reduce rotational laxity compared to the sectioned ALL state and that fixation at 30° would best reproduce native joint kinematics. Methods: Eight non-paired fresh-frozen human cadaveric knees with no prior injury, surgical history, or gross anatomic abnormality were evaluated with a 6 degree-of-freedom robotic system. Each specimen underwent a full kinematic assessment in each of the following states: 1) intact, 2) anatomic single-bundle (SB) ACLR with intact ALL, 3) anatomic SB ACLR with sectioned ALL, 4) 7 anatomic SB ACLR and ALLR states utilizing ALL graft fixation knee flexion angles of 0°, 15°, 30°, 45°, 60°, 75° and 90°, and 5) sectioned ACL and ALL. Internal rotation during a 5 N-m internal rotation torque and anterior displacement during an 88 N anterior load were recorded at 15° intervals between 0° and 120° of knee flexion. Axial plane displacement and

  6. The relationship between hamstring length and gluteal muscle strength in individuals with sacroiliac joint dysfunction

    OpenAIRE

    Massoud Arab, Amir; Reza Nourbakhsh, Mohammad; Mohammadifar, Ali

    2011-01-01

    It has been suggested that tight hamstring muscle, due to its anatomical connections, could be a compensatory mechanism for providing sacroiliac (SI) joint stability in patients with gluteal muscle weakness and SIJ dysfunction. The purpose of this study was to determine the relationship between hamstring muscle length and gluteal muscle strength in subjects with sacroiliac joint dysfunction. A total of 159 subjects with and without low back pain (LBP) between the ages of 20 and 65 years parti...

  7. Marine mammal observations collected using aircraft by ConocoPhillips in the Chukchi Sea, 1989-1991 and submitted as part of the ConocoPhillips and Shell Joint Monitoring Program in the Chukchi and Beaufort Seas (NODC Accession 0120533)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vessel- and aircraft-based marine mammal surveys in the Chukchi Sea collected from 1989 to 1991. The aerial marine mammal surveys were...

  8. Marine mammal observations collected by aircraft and ship and submitted as part of the ConocoPhillips and Shell Joint Monitoring Program in the Chukchi and Beaufort Seas, 2006-2010 (NODC Accession 0120532)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains vessel- and aircraft-based mammal sightings data and associated environmental data collected in the Chukchi and Beaufort seas during the open...

  9. An evaluation of anatomical and functional knee axis definition in the context of side-cutting.

    Science.gov (United States)

    Robinson, Mark A; Vanrenterghem, Jos

    2012-07-26

    Side-cutting is commonly used to evaluate knee joint kinematics and kinetics in the context of anterior cruciate ligament injury risk. Many existing side-cutting studies fail to clearly define the orientation of the femoral frame and the knee axis, making comparisons between studies difficult. A femoral frame constructed using the ISB or existing functional methods does not necessarily have a medial-lateral axis that is aligned with the axis of the knee. A functional frame that directly aligns with the medial-lateral knee axis was compared to the ISB anatomical frame and the Besier functional frame (Besier et al., 2003) to determine whether the chosen frame would affect the interpretation of side-cutting data. Kinematic and kinetic variables were calculated during three side-cutting manoeuvres of 28 subjects. Differences in mean frame orientation were correlated with the differences in mean knee angle during side-cutting. The differences between the ISB anatomical frame and the functional frames were significantly correlated with the differences in superior-inferior and medial-lateral axis orientations. Coefficients of multiple correlation showed a good to high (CMCs≥0.74) similarity between frames for knee angles and moments. Using a femoral anatomical frame rather than a functional frame most significantly affected offset rather than cross talk in knee angles and moments measured during side-cutting. There were no significant differences in offset or cross talk between the two functional methods. Maximum differences of <4° for frontal plane knee angle requires cautious interpretation but differences <8Nm for knee joint moment were not thought to affect the interpretation of side-cutting data when comparing between studies.

  10. Diagnostic shoulder arthroscopy: incidence of physiologic variants of joint structures

    Directory of Open Access Journals (Sweden)

    Martin Mikek

    2005-04-01

    Full Text Available Background: Shoulder arthroscopy first described by Burman already in 1930, has evolved only in last 15 years to become a common accepted diagnostic and therapeutic procedure in treatment of different shoulder conditions. Parallely to the advances in arthroscopic operative techniques also our knowledge about arthroscopic shoulder anatomy expanded and many physiologic variants in anatomical structures have been identified in glenohumeral joint. It is very important to be familiar with those when performing shoulder arthroscopy, since in some cases they can easily be mistaken for pathologic lesions which can lead to unnecessary and potentially harmful operative procedures.Methods: We prospectively evaluated arthroscopic shoulder anatomy in 54 consecutive shoulder arthroscopies performed for different shoulder conditions in our practice. In all patients diagnostic arthroscopy was performed following the SCOI protocol described by Snyder. With regard to the anatomy variants described in literature and its importance in shoulder arthroscopy, special attention was focused on three regions of glenohumeral joint: long head of biceps tendon with its anchor and adjacent superior labrum, anterior joint capsule with glenohumeral ligaments and subscapularis tendon and on anterior labrum. The incidence of the observed anatomical variants was calculated. The most common combinations of anatomy variants were described and schematically presented.Results: The most significant anatomical variant observed in the region of long head of biceps tendon, biceps anchor and superior labrum was sublabral sulcus that was observed in 17% of shoulders. The region of anterior capsule with glenohumeral ligaments and subscapularis tendon showed greatest anatomical variability, especially the MGHL and the IGHL were very variably expressed and in some cases also absent. In the region of anterior labrum two significant anatomical variants were observed, one of them sublabral hole

  11. On the problems of describing joint axis alignment.

    Science.gov (United States)

    Ball, Kevin A; Greiner, Thomas M

    2008-01-01

    Each three-dimensional joint possesses at least one potentially oblique axis of rotation. Several systems are used to express joint axis alignment. One system, designated the plane projection (PP) method, describes angles based on orthogonal projections onto two, of the three, anatomical planes. Alternatively, a joint axis may be described in two different ways using two sequential Cardan angle rotations. These expression systems all lay claim to similar descriptive labels, such as deviation and elevation. Difficulties arise as researchers use these various methods to compare their own data to the results of others. A joint axis alignment, described as 27 degrees deviation and 41 degrees elevation in PP, differs by as much as 6 degrees when expressed as Cardan angles. Differences among expression systems increase as the joint axis alignment becomes more oblique -- eventually differing by as much as 75 degrees . This paper explores implications for this lack of congruence among the joint axis expression systems. Effective steps in dealing with these issues begin with recognizing the existence and extent of the problem. The paper provides a common set of algorithms to illustrate and alleviate the possible problems associated with the exchange of joint axis alignment data.

  12. Anatomical aspects of sinus floor elevations.

    Science.gov (United States)

    van den Bergh, J P; ten Bruggenkate, C M; Disch, F J; Tuinzing, D B

    2000-06-01

    Inadequate bone height in the lateral part of the maxilla forms a contra-indication for implant surgery. This condition can be treated with an internal augmentation of the maxillary sinus floor. This sinus floor elevation, formerly called sinus lifting, consists of a surgical procedure in which a top hinge door in the lateral maxillary sinus wall is prepared and internally rotated to a horizontal position. The new elevated sinus floor, together with the inner maxillary mucosa, will create a space that can be filled with graft material. Sinus lift procedures depend greatly on fragile structures and anatomical variations. The variety of anatomical modalities in shape of the inner aspect of the maxillary sinus defines the surgical approach. Conditions such as sinus floor convolutions, sinus septum, transient mucosa swelling and narrow sinus may form a (usually relative) contra-indication for sinus floor elevation. Absolute contra-indications are maxillary sinus diseases (tumors) and destructive former sinus surgery (like the Caldwell-Luc operation). The lateral sinus wall is usually a thin bone plate, which is easily penetrated with rotating or sharp instruments. The fragile Schneiderian membrane plays an important role for the containment of the bonegraft. The surgical procedure of preparing the trap door and luxating it, together with the preparation of the sinus mucosa, may cause a mucosa tear. Usually, when these perforations are not too large, they will fold together when turning the trap door inward and upward, or they can be glued with a fibrin sealant, or they can be covered with a resorbable membrane. If the perforation is too large, a cortico-spongious block graft can be considered. However, in most cases the sinus floor elevation will be deleted. Perforations may also occur due to irregularities in the sinus floor or even due to immediate contact of sinus mucosa with oral mucosa. Obstruction of the antro-nasal foramen is, due to its high location, not a

  13. Prostatome: a combined anatomical and disease based MRI atlas of the prostate.

    Science.gov (United States)

    Rusu, Mirabela; Bloch, B Nicolas; Jaffe, Carl C; Genega, Elizabeth M; Lenkinski, Robert E; Rofsky, Neil M; Feleppa, Ernest; Madabhushi, Anant

    2014-07-01

    In this work, the authors introduce a novel framework, the anatomically constrained registration (AnCoR) scheme and apply it to create a fused anatomic-disease atlas of the prostate which the authors refer to as the prostatome. The prostatome combines a MRI based anatomic and a histology based disease atlas. Statistical imaging atlases allow for the integration of information across multiple scales and imaging modalities into a single canonical representation, in turn enabling a fused anatomical-disease representation which may facilitate the characterization of disease appearance relative to anatomic structures. While statistical atlases have been extensively developed and studied for the brain, approaches that have attempted to combine pathology and imaging data for study of prostate pathology are not extant. This works seeks to address this gap. The AnCoR framework optimizes a scoring function composed of two surface (prostate and central gland) misalignment measures and one intensity-based similarity term. This ensures the correct mapping of anatomic regions into the atlas, even when regional MRI intensities are inconsistent or highly variable between subjects. The framework allows for creation of an anatomic imaging and a disease atlas, while enabling their fusion into the anatomic imaging-disease atlas. The atlas presented here was constructed using 83 subjects with biopsy confirmed cancer who had pre-operative MRI (collected at two institutions) followed by radical prostatectomy. The imaging atlas results from mapping thein vivo MRI into the canonical space, while the anatomic regions serve as domain constraints. Elastic co-registration MRI and corresponding ex vivo histology provides "ground truth" mapping of cancer extent on in vivo imaging for 23 subjects. AnCoR was evaluated relative to alternative construction strategies that use either MRI intensities or the prostate surface alone for registration. The AnCoR framework yielded a central gland Dice

  14. Prostatome: A combined anatomical and disease based MRI atlas of the prostate

    Energy Technology Data Exchange (ETDEWEB)

    Rusu, Mirabela; Madabhushi, Anant, E-mail: anant.madabhushi@case.edu [Case Western Reserve University, Cleveland, Ohio 44106 (United States); Bloch, B. Nicolas; Jaffe, Carl C. [Boston University School of Medicine, Boston, Massachusetts 02118 (United States); Genega, Elizabeth M. [Beth Israel Deaconess Medical Center, Boston, Massachusetts 02215 (United States); Lenkinski, Robert E.; Rofsky, Neil M. [UT Southwestern Medical Center, Dallas, Texas 75235 (United States); Feleppa, Ernest [Riverside Research Institute, New York, New York 10038 (United States)

    2014-07-15

    Purpose: In this work, the authors introduce a novel framework, the anatomically constrained registration (AnCoR) scheme and apply it to create a fused anatomic-disease atlas of the prostate which the authors refer to as the prostatome. The prostatome combines a MRI based anatomic and a histology based disease atlas. Statistical imaging atlases allow for the integration of information across multiple scales and imaging modalities into a single canonical representation, in turn enabling a fused anatomical-disease representation which may facilitate the characterization of disease appearance relative to anatomic structures. While statistical atlases have been extensively developed and studied for the brain, approaches that have attempted to combine pathology and imaging data for study of prostate pathology are not extant. This works seeks to address this gap. Methods: The AnCoR framework optimizes a scoring function composed of two surface (prostate and central gland) misalignment measures and one intensity-based similarity term. This ensures the correct mapping of anatomic regions into the atlas, even when regional MRI intensities are inconsistent or highly variable between subjects. The framework allows for creation of an anatomic imaging and a disease atlas, while enabling their fusion into the anatomic imaging-disease atlas. The atlas presented here was constructed using 83 subjects with biopsy confirmed cancer who had pre-operative MRI (collected at two institutions) followed by radical prostatectomy. The imaging atlas results from mapping thein vivo MRI into the canonical space, while the anatomic regions serve as domain constraints. Elastic co-registration MRI and corresponding ex vivo histology provides “ground truth” mapping of cancer extent on in vivo imaging for 23 subjects. Results: AnCoR was evaluated relative to alternative construction strategies that use either MRI intensities or the prostate surface alone for registration. The AnCoR framework

  15. Nomina anatomica. Anatomic terminology and the old French terminology.

    Science.gov (United States)

    Chiapas-Gasca, Karla; Passos, Luiz Fernando De Souza; Euzébio Ribeiro, Sandra Lúcia; Villaseñor-Ovies, Pablo

    A surprising finding in our seminars in Latin America and Spain was that approximately half of the participants continued to use the old French anatomical nomenclature. The substance of this paper is a table in which we compare the anatomical names for the items reviewed in our seminar, in a Spanish version of the old French nomenclature and in the Spanish, Portuguese, and English versions of the currently employed anatomical terms.

  16. Normal and Impaired Mobility of the Glenohumeral Joint: Anatomical, biomechanical alld clillical aspects

    NARCIS (Netherlands)

    A. de Gast (Arthur)

    1998-01-01

    textabstractIn the field of orthopaedics, extensive knowledge exists on the diagnosis and treatment of skeletal diseases, e.g. developmental anomalies, fractures and osteoarthritis. Less knowledge is available on soft tissue diseases. The main reason for this difference of knowledge concerns the ima

  17. Construction and biomechanical properties of polyaxial self-locking anatomical plate based on the geometry of distal tibia.

    Science.gov (United States)

    Liang, Weiguo; Ye, Weixiong; Ye, Dongping; Zhou, Ziqiang; Chen, Zhiguang; Li, Aiguo; Xie, Zong-Han; Zhang, Lihai; Xu, Jiake

    2014-01-01

    In order to provide scientific and empirical evidence for the clinical application of the polyaxial self-locking anatomical plate, 80 human tibias from healthy adults were scanned by spiral CT and their three-dimensional images were reconstructed using the surface shaded display (SSD) method. Firstly, based on the geometric data of distal tibia, a polyaxial self-locking anatomical plate for distal tibia was designed and constructed. Biomechanical tests were then performed by applying axial loading, 4-point bending, and axial torsion loading on the fracture fixation models of fresh cadaver tibias. Our results showed that variation in twisting angles of lateral tibia surface was found in various segments of the distal tibia. The polyaxial self-locking anatomical plate was constructed based on the geometry of the distal tibia. Compared to the conventional anatomical locking plate, the polyaxial self-locking anatomical plate of the distal tibia provides a better fit to the geometry of the distal tibia of the domestic population, and the insertion angle of locking screws can be regulated up to 30°. Collectively, this study assesses the geometry of the distal tibia and provides variable locking screw trajectory to improve screw-plate stability through the design of a polyaxial self-locking anatomical plate.

  18. Anatomical Terms in J. Basanavičius’ Manuscript Anatomijos ir medicinos vardyno medžiaga

    Directory of Open Access Journals (Sweden)

    Nijolė Litevkienė

    2011-12-01

    Full Text Available The historical evolution of anatomical terms dates to antiquity, to the writings of Hippocrates. The historical development of Lithuanian anatomical terminology goes back to the seventeenth century. Anatomical terminology, as a comprehensive system of the names of human body parts is being compiled gradually. The originator of Lithuanian medical terminology was J. Basanavičius. The research paper aims to analyze anatomical terms used in J. Basanavičius’ manuscript Anatomijos ir medicinos vardyno medžiaga (further BM and to compare them with the terms in the Dictionary of Medical Terms ( Medicinos terminų žodynas 1980. The research focuses on the analysis of some aspects of differentiation and congruity of simple and multi-word anatomical terms of the manuscript and the dictionary. About 270 Lithuanian anatomical terms with Russian and Latin equivalents were collected by J. Basanavičius. The results show that the major part of the terms are different, the lesser part of the terms are identical.

  19. Anatomically Plausible Surface Alignment and Reconstruction

    DEFF Research Database (Denmark)

    Paulsen, Rasmus R.; Larsen, Rasmus

    2010-01-01

    With the increasing clinical use of 3D surface scanners, there is a need for accurate and reliable algorithms that can produce anatomically plausible surfaces. In this paper, a combined method for surface alignment and reconstruction is proposed. It is based on an implicit surface representation...... combined with a Markov Random Field regularisation method. Conceptually, the method maintains an implicit ideal description of the sought surface. This implicit surface is iteratively updated by realigning the input point sets and Markov Random Field regularisation. The regularisation is based on a prior...... energy that has earlier proved to be particularly well suited for human surface scans. The method has been tested on full cranial scans of ten test subjects and on several scans of the outer human ear....

  20. Fleck, anatomical drawings and early modern history.

    Science.gov (United States)

    Lowy, Ilana

    2008-01-01

    In 2003, the historian of medicine Michael Stolberg, contested the argument--developed by Thomas Laqueur and Londa Schiebinger--that in the XVIII century, anatomists shifted from a one-sex to a two-sexes model. Laqueur and Schiebinger linked the new focus on anatomical differences between the sexes to the rise of egalitarian aspirations during the Enlightenment, and a consecutive need to ground male domination in invariable "laws of nature". Stolberg claimed that the shift to the two sexes model occurred in the early modern period, and was mainly motivated by developments within medicine. This article examines the 2003 debate on the origin of "two sexes" model in the light of a 1939 controversy that opposed the historian of medicine Tadeusz Bilikiewicz, who advocated a focus on a "spirit" of an earlier epoch, and the pioneer of sociology of science Ludwik Fleck, who promoted the study of the "thought styles" of specific scientific communities.

  1. Do retractile testes have anatomical anomalies?

    Science.gov (United States)

    Anderson, Kleber M.; Costa, Suelen F.; Sampaio, Francisco J.B.; Favorito, Luciano A.

    2016-01-01

    ABSTRACT Objectives: To assess the incidence of anatomical anomalies in patients with retractile testis. Materials and Methods: We studied prospectively 20 patients (28 testes) with truly retractile testis and compared them with 25 human fetuses (50 testes) with testis in scrotal position. We analyzed the relations among the testis, epididymis and patency of the processus vaginalis (PV). To analyze the relations between the testis and epididymis, we used a previous classification according to epididymis attachment to the testis and the presence of epididymis atresia. To analyze the structure of the PV, we considered two situations: obliteration of the PV and patency of the PV. We used the Chi-square test for contingency analysis of the populations under study (p patent processus vaginalis and epididymal anomalies. PMID:27564294

  2. Anatomic brain asymmetry in vervet monkeys.

    Science.gov (United States)

    Fears, Scott C; Scheibel, Kevin; Abaryan, Zvart; Lee, Chris; Service, Susan K; Jorgensen, Matthew J; Fairbanks, Lynn A; Cantor, Rita M; Freimer, Nelson B; Woods, Roger P

    2011-01-01

    Asymmetry is a prominent feature of human brains with important functional consequences. Many asymmetric traits show population bias, but little is known about the genetic and environmental sources contributing to inter-individual variance. Anatomic asymmetry has been observed in Old World monkeys, but the evidence for the direction and extent of asymmetry is equivocal and only one study has estimated the genetic contributions to inter-individual variance. In this study we characterize a range of qualitative and quantitative asymmetry measures in structural brain MRIs acquired from an extended pedigree of Old World vervet monkeys (n = 357), and implement variance component methods to estimate the proportion of trait variance attributable to genetic and environmental sources. Four of six asymmetry measures show pedigree-level bias and one of the traits has a significant heritability estimate of about 30%. We also found that environmental variables more significantly influence the width of the right compared to the left prefrontal lobe.

  3. Joint Program Management Handbook

    Science.gov (United States)

    1994-12-01

    the Engieermg and Manufacuring Devopment Phase. Nfilestoae HI- Develommen Annros Devopment approval marks a significant step for any program, but it is...to review concept formulaton. Systems Engilneertn As with service programs, systems engineering in joint program management is an essential tool . I...MANAGEMENT HANDBOOK On=e wd Umawtaiutt As discussed in Chapter 7, systems analysis of relationships is a usef tool for joint program managers. The joint

  4. Jointly Poisson processes

    CERN Document Server

    Johnson, D H

    2009-01-01

    What constitutes jointly Poisson processes remains an unresolved issue. This report reviews the current state of the theory and indicates how the accepted but unproven model equals that resulting from the small time-interval limit of jointly Bernoulli processes. One intriguing consequence of these models is that jointly Poisson processes can only be positively correlated as measured by the correlation coefficient defined by cumulants of the probability generating functional.

  5. The Stress Distribution on the Zygapophyseal Joint of Lumbar Vertebra by ANSYS Program

    Directory of Open Access Journals (Sweden)

    Summer S. M. Mukhtar

    2010-01-01

    Full Text Available Zygapophyseal joints (or facet joints, are a plane synovial joint which located between the articular facet processes of the vertebral arch which is freely guided movable joints. Ten dried vertebrae were used for the lumbar region and taking (L4 as a sample to reveal stress pathways across the joints by using ANSYS program under different loading conditions which used Finite Elements Analysis model. Results obtained from the ANSYS program are important in understanding the boundary conditions for load analysis and the points of stress concentration which explained from the anatomical point of view and linked to muscle and ligament attachments. This model used as a computational tool to joint biomechanics and to prosthetic implant analysis.

  6. [Total temporomandibular joint prostheses].

    Science.gov (United States)

    Zwetyenga, N; Amroun, S; Wajszczak, B-L; Moris, V

    2016-09-01

    The temporomandibular joint (TMJ) is probably the most complex human joint. As in all joints, its prosthetic replacement may be indicated in selected cases. Significant advances have been made in the design of TMJ prostheses during the last three decades and the indications have been clarified. The aim of our work was to make an update on the current total TMJ total joint replacement. Indications, contraindications, prosthetic components, advantages, disadvantages, reasons for failure or reoperation, virtual planning and surgical protocol have been exposed. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  7. Subtalar joint arthrodesis.

    Science.gov (United States)

    Lopez, Ramon; Singh, Tarika; Banga, Samantha; Hasan, Nafisa

    2012-01-01

    Isolated subtalar joint arthrodesis has gained popularity more recently. Research has shown that it preserves rearfoot motion, does not increase the risk of arthritis in adjacent joints, and is not an especially complex operative procedure. It decreases the chance of midtarsal joint nonunion and malunion postoperatively. This article takes an in-depth approach to isolated talocalcaneal fusions. Anatomy and biomechanics of the subtalar joint are reviewed. Clinical presentation and radiologic evaluation are discussed. Conservative treatment, operative technique, and postoperative management are included. Copyright © 2012 Elsevier Inc. All rights reserved.

  8. Extra-anatomic transplantations in autologous adult cell therapies aiding anatomical regeneration and physiological recovery – An insight and categorization

    Directory of Open Access Journals (Sweden)

    Editorial

    2015-12-01

    analysis of the functional uniqueness of the source vs target across these criteria of germ layers, organs, tissues and sites have to be thoroughly studied. Until pluripotent stem cell-derived clinical applications come into regular practice, such extra-anatomic adult cell therapies either IECT or TECT are worth studying as novel solutions to tissue regeneration. These are likely to evolve in the coming years and existing solutions could be enhanced using the principles behind IECT or TECT for diseases that do not have a definitive treatment. References Knutsen G, Drogset JO, Engebretsen L, Grøntvedt T, Isaksen V, Ludvigsen TC, Roberts S, Solheim E, Strand T, Johansen O. A randomized trial comparing autologous chondrocyte implantation with microfracture. Findings at five years. J Bone Joint Surg Am. 2007;89(10:2105-12. Tsai RJ, Li LM, Chen JK. Reconstruction of damaged corneas by transplantation of autologous limbal epithelial cells. N Engl J Med. 2000;343(2:86-93. Siltanen A, Nuutila K, Imanishi Y, Uenaka H, Mäkelä J, Pätilä T, Vento A, Miyagawa S, Sawa Y, Harjula A, Kankuri E. The paracrine effect of skeletal myoblasts is cardioprotective against oxidative stress and involves EGFR-ErbB4 signaling, cystathionase, and the unfolded protein response. Cell Transplant.2015. [Epub ahead of print] Burman S, Sangwan V. Cultivated limbal stem cell transplantation for ocular surface reconstruction. Clin Ophthalmol. 2008;2(3:489-502. Tabakow P, Jarmundowicz W, Czapiga B, Fortuna W, Miedzybrodzki R, Czyz M, Huber J, Szarek D, Okurowski S, Szewczyk P, Gorski A, Raisman G. Transplantation of autologous olfactory ensheathing cells in complete human spinal cord injury.Cell Transplant. 2013;22(9:1591-612. Vaddi S, Godala C, Reddy V, Senthilkumar R, Srinivasan T, Reena H, Preethy S, Abraham S. Role of tissue engineered buccal mucosa for treatment of urethral stricture. Proceedings of the Annual Symposium & Plenary Session on Regenerative Medicine (PASRM. J Stem Cells Regen Med. 2013

  9. Ability of lower teardrop edge to restore anatomical hip center height in total hip arthroplasty

    Institute of Scientific and Technical Information of China (English)

    Lu Yufeng; Cheng Liming; Guo Wanshou; Yu Qingsheng; Gao Fuqiang; Zhang Qidong; Liu Zhaohui

    2014-01-01

    Background The acetabular teardrop is often used to guide acetabular component placement in total hip arthroplasty (THA).Placing the lower acetabular component aspect at the same level as the lower teardrop edge was assumed to restore the hip center of rotation.Here we radiographically analyzed the relationship between cup center and normal contralateral acetabulum center height on unilateral THA using this placement method.Methods A total of 106 unilateral THA cases with normal contralateral acetabula were reviewed and the vertical and horizontal distances in relation to the lower acetabular teardrop edge from both hip joint centers,cup inclination,and anteversion were measured radiographically.The paired t-test was used to compare left and right hip center heights.Scatter plots and Pearson's correlation coefficients were used to evaluate differences in hip center heights,cup anteversion,inclination angles,and medialized cup center distance compared to the contralateral hip joint.Results Cup center height was significantly greater (P <0.01) than contralateral hip joint center height (93.4% in the 0-5 mm range,6.6% >5 mm).There was a weak correlation between hip center height difference and inclination (r=0.376,P <0.01) and between difference and anteversion (r=0.310,P <0.01) but no correlation between difference and outer cup diameter (r=0.184,P=0.058) or difference and medialized cup center distance (r=-0.098,P=0.318).Conclusions Although this method did not exactly replicate anatomic hip center height,the clinical significance of cup center height and anatomic hip center height differences is negligible.This acetabular component placement method has high simplicity,reliability,and stability.

  10. Short Term Evaluation of an Anatomically Shaped Polycarbonate Urethane Total Meniscus Replacement in a Goat Model.

    Directory of Open Access Journals (Sweden)

    A C T Vrancken

    Full Text Available Since the treatment options for symptomatic total meniscectomy patients are still limited, an anatomically shaped, polycarbonate urethane (PCU, total meniscus replacement was developed. This study evaluates the in vivo performance of the implant in a goat model, with a specific focus on the implant location in the joint, geometrical integrity of the implant and the effect of the implant on synovial membrane and articular cartilage histopathological condition.The right medial meniscus of seven Saanen goats was replaced by the implant. Sham surgery (transection of the MCL, arthrotomy and MCL suturing was performed in six animals. The contralateral knee joints of both groups served as control groups. After three months follow-up the following aspects of implant performance were evaluated: implant position, implant deformation and the histopathological condition of the synovium and cartilage.Implant geometry was well maintained during the three month implantation period. No signs of PCU wear were found and the implant did not induce an inflammatory response in the knee joint. In all animals, implant fixation was compromised due to suture breakage, wear or elongation, likely causing the increase in extrusion observed in the implant group. Both the femoral cartilage and tibial cartilage in direct contact with the implant showed increased damage compared to the sham and sham-control groups.This study demonstrates that the novel, anatomically shaped PCU total meniscal replacement is biocompatible and resistant to three months of physiological loading. Failure of the fixation sutures may have increased implant mobility, which probably induced implant extrusion and potentially stimulated cartilage degeneration. Evidently, redesigning the fixation method is necessary. Future animal studies should evaluate the improved fixation method and compare implant performance to current treatment standards, such as allografts.

  11. A modified surgical technique for reconstruction of an acute acromioclavicular joint dislocation

    Science.gov (United States)

    Marchie, Anthony; Kumar, Arun; Catre, Melanio

    2009-01-01

    We report a modified surgical technique for reconstruction of coracoclavicular and acromioclavicular ligaments after acute dislocation of acromioclavicular joint using suture anchors. We have repaired 3 consecutive type III acromioclavicular dislocations with good results. This technique is simple and safe and allows anatomical reconstruction of the ligaments in acute dislocations. PMID:20671868

  12. Denervation of the painful temporomandibular joint.

    Science.gov (United States)

    Dellon, Lee; Maloney, Christopher T

    2006-09-01

    The successful management of temporomandibular joint (TMJ) pain remains elusive. Often the initial relief of pain is complicated by recurrence of the symptoms. This time frame suggests that the pain may be related to neuromas of the nerves that innervate the TMJ. In 2003, an anatomic description of the innervation of the TMJ suggested that denervation of this joint might be the appropriate treatment for pain resistant to traditional forms of therapy. In January, 2005, this approach was used to treat recalcitrant left TMJ pain in a 21-year-old woman with congenital hearing loss who had recurrent dislocations of her TMJ articular disc. She previously had two arthroscopic surgeries and one open attempt to treat her TMJ pain. The last failed TMJ surgery created a painful neuroma that prevented her from wearing her hearing aid. A medial and lateral denervation of the TMJ joint was done. The successful results of this surgery are presented at one-year follow-up. The technical considerations of this approach and risk to the facial nerve are discussed.

  13. On the p-norm joint spectral radius

    Institute of Scientific and Technical Information of China (English)

    周佳立

    2003-01-01

    The p-norm joint spectral radius is defined by a bounded collection of square matrices with complex entries and of the same size. In the present paper the author investigates the p-norm joint spectral radius for integers. The method introduced in this paper yields some basic formulas for these spectral radii. The approach used in this paper provides a simple proof of Berger-Wang's relation concerning the ∞-norm joint spectral radius.

  14. On the p-norm joint spectral radius

    Institute of Scientific and Technical Information of China (English)

    周佳立

    2003-01-01

    The p-norm joint spectral radius is defined by a bounded collection of square matrices with complex entries and of the same size. In the present paper the author investigates the p-norm joint spectral radius for integers. The method introduced in this paper yields some basic formulas for these spectral radii. The approach used in this paper provides a simple proof of Berger-Wang' s relation concerning the ∞-norm joint spectral radius.

  15. Parametric Anatomical Modeling: a method for modeling the anatomical layout of neurons and their projections.

    Science.gov (United States)

    Pyka, Martin; Klatt, Sebastian; Cheng, Sen

    2014-01-01

    Computational models of neural networks can be based on a variety of different parameters. These parameters include, for example, the 3d shape of neuron layers, the neurons' spatial projection patterns, spiking dynamics and neurotransmitter systems. While many well-developed approaches are available to model, for example, the spiking dynamics, there is a lack of approaches for modeling the anatomical layout of neurons and their projections. We present a new method, called Parametric Anatomical Modeling (PAM), to fill this gap. PAM can be used to derive network connectivities and conduction delays from anatomical data, such as the position and shape of the neuronal layers and the dendritic and axonal projection patterns. Within the PAM framework, several mapping techniques between layers can account for a large variety of connection properties between pre- and post-synaptic neuron layers. PAM is implemented as a Python tool and integrated in the 3d modeling software Blender. We demonstrate on a 3d model of the hippocampal formation how PAM can help reveal complex properties of the synaptic connectivity and conduction delays, properties that might be relevant to uncover the function of the hippocampus. Based on these analyses, two experimentally testable predictions arose: (i) the number of neurons and the spread of connections is heterogeneously distributed across the main anatomical axes, (ii) the distribution of connection lengths in CA3-CA1 differ qualitatively from those between DG-CA3 and CA3-CA3. Models created by PAM can also serve as an educational tool to visualize the 3d connectivity of brain regions. The low-dimensional, but yet biologically plausible, parameter space renders PAM suitable to analyse allometric and evolutionary factors in networks and to model the complexity of real networks with comparatively little effort.

  16. Mechanics of Sheeting Joints

    Science.gov (United States)

    Martel, S. J.

    2015-12-01

    Physical breakdown of rock across a broad scale spectrum involves fracturing. In many areas large fractures develop near the topographic surface, with sheeting joints being among the most impressive. Sheeting joints share many geometric, textural, and kinematic features with other joints (opening-mode fractures) but differ in that they are (a) discernibly curved, (b) open near the topographic surface, and (c) form subparallel to the topographic surface. Where sheeting joints are geologically young, the surface-parallel compressive stresses are typically several MPa or greater. Sheeting joints are best developed beneath domes, ridges, and saddles; they also are reported, albeit rarely, beneath valleys or bowls. A mechanism that accounts for all these associations has been sought for more than a century: neither erosion of overburden nor high lateral compressive stresses alone suffices. Sheeting joints are not accounted for by Mohr-Coulomb shear failure criteria. Principles of linear elastic fracture mechanics, together with the mechanical effect of a curved topographic surface, do provide a basis for understanding sheeting joint growth and the pattern sheeting joints form. Compressive stresses parallel to a singly or doubly convex topographic surface induce a tensile stress perpendicular to the surface at shallow depths; in some cases this alone could overcome the weight of overburden to open sheeting joints. If regional horizontal compressive stresses, augmented by thermal stresses, are an order of magnitude or so greater than a characteristic vertical stress that scales with topographic amplitude, then topographic stress perturbations can cause sheeting joints to open near the top of a ridge. This topographic effect can be augmented by pressure within sheeting joints arising from water, ice, or salt. Water pressure could be particularly important in helping drive sheeting joints downslope beneath valleys. Once sheeting joints have formed, the rock sheets between

  17. Assessment of temporomandibular joint disease.

    Science.gov (United States)

    Kostrzewa-Janicka, J; Mierzwinska-Nastalska, E; Jurkowski, P; Okonski, P; Nedzi-Gora, M

    2013-01-01

    The diagnosis of temporomandibular joint (TMJ) disorders consists of clinical (Reaserch Diagnostic Criteria for Temporomandibular Disorders, RDC/TMD) and additional (computer tomography, CT or magnetic resonance imaging, and MRI) examinations. Due to the growing knowledge of pathologic changes within the TMJ, the researches become more aware of the difficulty in detection the early symptoms of disorders using conventional examination. Therefore, it is now expected that the collected samples of synovial fluid, serum, or urine samples could enable easier identification of inflammatory process course, and degenerative cartilage changes state.

  18. Collection Mapping.

    Science.gov (United States)

    Harbour, Denise

    2002-01-01

    Explains collection mapping for library media collections. Discusses purposes for creating collection maps, including helping with selection and weeding decisions, showing how the collection supports the curriculum, and making budget decisions; and methods of data collection, including evaluating a collaboratively taught unit with the classroom…

  19. MR diagnosis of temporomandibular joint. A study of joint effusion

    Energy Technology Data Exchange (ETDEWEB)

    Kaneda, Takashi; Yamashiro, Mitsuaki; Ozawa, Kaoru; Suzuki, Hiromi; Okada, Hiroyuki; Yamamoto, Hirotsugu [Nihon Univ., Matsudo, Chiba (Japan). School of Dentistry

    1998-03-01

    The purposes of this study were to evaluate the relationship between correlation of MR joint effusion of the temporomandibular joint and disk position, to evaluate the relationship between joint effusion and aging, and to assess the frequency of MR joint effusion of bilateral temporomandibular joints. The temporomandibular joints of 192 patients with clinical symptoms of temporomandibular joint disorders were imaged bilaterally using high field, surface-coil MR imaging. Oblique sagittal and coronal proton density-weighted and T2-weighted images were obtained. Imaging findings of joint effusion were correlated with disk position, aging, and bilateral temporomandibular joints. MR showed effusion in 4% of the joints with normal superior disk position, 36% of the joints with disk displacement with reduction, and 45% of the joints with disk displacement without reduction. There were significant differences in the incidence of joint effusion between normal disk position and anterior disk displacement with or without reduction. Younger patients less than 40 years were significant higher the incidence of joint effusion than those of older patients. A significant association was seen between joint effusion and aging. MR showed effusion in 17% of the unilateral temporomandibular joint, 24% of the bilateral temporomandibular joints. There was no significant difference between unilateral and bilateral case. These results indicated that joint effusion using MR imaging was associated with varied temporomandibular joint pathologic states. (author)

  20. Possible thermoregulatory functions of the internal vertebral venous plexus in man and various other mammals : Evidence from comparative anatomical studies

    NARCIS (Netherlands)

    Hoogland, P. V. J. M.; Vorster, W.; Groen, R. J. M.; Kotze, S. H.

    Comparative anatomy was used to collect more evidence for a thermoregulatory function of the internal vertebral venous plexus (IVVP). The venous connections of the IVVP were studied and compared in various mammals in order to find evidence for the existence of climate related anatomical adaptations.

  1. Investigating Science Student Teachers' Ideas about Function and Anatomical Form of Two Human Sensory Organs, the Eye and the Ear

    Science.gov (United States)

    Kunt, Halil

    2016-01-01

    The purpose of this research was to determine science student teachers' level of knowledge about the anatomical structure of two sensory organs, the eye and the ear, in addition to vision and hearing processes. Conducted with 86 science student teachers, research utilized drawing methods and open-ended questions as data collection instruments. The…

  2. Creep of timber joints

    NARCIS (Netherlands)

    Van de Kuilen, J.W.G.

    2008-01-01

    A creep analysis has been performed on nailed, toothed-plates and split-ring joints in a varying uncontrolled climate. The load levels varied between 30% and 50% of the average ultimate short term strength of these joints, tested in accordance with ISO 6891. The climate in which the tests were

  3. Acromioclavicular Joint Separations

    Science.gov (United States)

    2013-01-01

    Published online: 16 December 2012 # Springer Science+Business Media New York 2012 Abstract Acromioclavicular (AC) joint separations are common...injuries. The sports most likely to cause AC joint dislocations are football, soccer , hockey, rugby, and skiing, among others [9, 28, 29]. The major cause

  4. An Investigation of Anatomical Competence in Junior Medical Doctors

    Science.gov (United States)

    Vorstenbosch, Marc A. T. M.; Kooloos, Jan G. M.; Bolhuis, Sanneke M.; Laan, Roland F. J. M.

    2016-01-01

    Because of a decrease of the time available for anatomy education, decisions need to be made to reduce the relevant content of the anatomy curriculum. Several expert consensus initiatives resulted in lists of structures, lacking analysis of anatomical competence. This study aims to explore the use of anatomical knowledge by medical doctors in an…

  5. 16 CFR Figure 1 to Part 1203 - Anatomical Planes

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Anatomical Planes 1 Figure 1 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 1 Figure 1 to Part 1203—Anatomical Planes ER10MR98.001...

  6. A Hybrid Method for Automatic Anatomical Variant Detection and Segmentation

    NARCIS (Netherlands)

    Lorenz, C.; Hanna, R.; Barschdorf, H.; Klinder, T.; Weber, IF.; Krueger, M.; Doessel, O.

    2012-01-01

    The delineation of anatomical structures in medical images can be achieved in an efficient and robust manner using statistical anatomical organ models, which has been demonstrated for an already considerable set of organs, including the heart. While it is possible to provide models with sufficient s

  7. Strategies for joint appointments.

    Science.gov (United States)

    Royle, J; Crooks, D L

    1985-01-01

    The structure and policies governing joint appointments discussed above, are developed primarily through cooperation and collaboration between nursing service and education institutions. The joint appointee participates in the process of negotiation of salary, benefits and role responsibilities and exploration of the implications of the appointment for personal career development. Implementation and maintenance of the appointment requires the collaborative efforts of the joint appointee with both contracting agencies. Factors influencing the functioning of joint appointees have been identified and strategies to facilitate functioning presented. The joint appointee must be independent in thought and action yet adaptable to work within the boundaries of two social systems with differing values and expectations. Nursing management, peers and students can provide the support needed to overcome the frustrations and to achieve the rewards inherent in successful implementation of an exciting and innovative role.

  8. Engaging Undergraduates in Special Collections through English Composition

    National Research Council Canada - National Science Library

    Reynolds, Matthew; Sauter, Dale

    2008-01-01

      Reynolds and Sauter talk about the East Carolina University Department of English and the Verona Joyner Langford North Carolina Collection's joint project, which encourages undergraduates to use...

  9. [Modelling of the knee joint loading conditions in the view of mechanics].

    Science.gov (United States)

    Pustovoĭt, K B; Karpins'kyĭ, M Iu

    2013-02-01

    The results of mathematic modelling of work of femoropatellar joint in normal conditions and in the presence of dysplastic deformity were adduced. There was established, that a knee joint (KJ) by its external appearance and function constitutes a classic cam mechanism. Biomechanical scheme of interaction between the femoral bone processus and patella was elaborated. In accordance to scheme of cam mechanism its experimental roentgenometric investigations were performed. According to statistical analysis performed, in conditions of dysplasia in femoropatellar joint the changes in the KJ occur, which may cause its blockade; the patella position in the KJ depends on peculiarities of anatomical structure of the femoral bone processuses.

  10. A Mastication Mechanism Designed for Testing Temporomandibular Joint Implants

    Directory of Open Access Journals (Sweden)

    Ryan J. Frayne

    2012-01-01

    Full Text Available The development of temporomandibular joint implants has involved simplified mechanical tests that apply pure vertical forces or pure rotational movements to the implant. The aim of this study was to develop a biological based mastication mechanism and conduct preliminary testing of a novel temporomandibular joint implant. The mechanism was designed to mimic temporomandibular joint loads by performing compression and anterior/posterior translation. Pilot testing was performed on six implant/joint specimens for seven consecutive hours, completing approximately 22,000 cycles at a frequency of approximately 1 Hz. Each cycle had a joint compression phase (67.3 N over 0.15 s followed by a translation phase (8.67 N over 0.43 s that was similar to joint loads/motions that have been reported in vivo. This new mastication mechanism incorporates both anatomical and mechanical variability. The use of biological specimens is an important approach that can help bridge the gap between traditional synthetic implant materials/mechanical testing and in vivo testing.

  11. Chromium Content in the Human Hip Joint Tissues

    Institute of Scientific and Technical Information of China (English)

    Barbara Brodziak-Dopiera; Jerzy Kwapuliski; Krzysztof Sobczyk; Danuta Wiechua

    2015-01-01

    Objective Chromium has many important functions in the human body. For the osseous tissue, its role has not been clearly defined. This study was aimed at determining chromium content in hip joint tissues. Methods A total of 91 hip joint samples were taken in this study, including 66 from females and 25 from males. The sample tissues were separated according to their anatomical parts. The chromium content was determined by the AAS method. The statistical analysis was performed with U Mann-Whitney's non-parametric test, P≤0.05. Results The overall chromium content in tissues of the hip joint in the study subjects was as follows:5.73 µg/g in the articular cartilage, 5.33 µg/g in the cortical bone, 17.86 µg/g in the cancellous bone, 5.95 µg/g in the fragment of the cancellous bone from the intertrochanteric region, and 1.28 µg/g in the joint capsule. The chromium contents were observed in 2 group patients, it was 7.04 µg/g in people with osteoarthritis and 12.59 µg/g in people with fractures. Conclusion The observed chromium content was highest in the cancellous bone and the lowest in the joint capsule. Chromium content was significantly different between the people with hip joint osteoarthritis and the people with femoral neck fractures.

  12. Accuracy of Posterior Subtalar Joint Injection Without Fluoroscopy

    Science.gov (United States)

    Kirk, Kevin L.; Campbell, John T.; Guyton, Gregory P.

    2008-01-01

    Injection into the posterior subtalar joint has not been validated for accuracy using radiographic end points. We asked whether needle placement into a normal posterior subtalar joint could be performed accurately and selectively by experienced surgeons without fluoroscopic guidance. Three fellowship-trained orthopaedic foot and ankle surgeons each injected the posterior subtalar joint of 20 cadaveric specimens using an anterolateral approach. Fluoroscopic images were obtained by an independent investigator and blinded. A separate fellowship-trained foot and ankle surgeon interpreted the images. Of 60 injections, 58 were accurate and two were extraarticular based on interpretation by an independent foot and ankle surgeon. Extravasation into the ankle occurred in 14 samples and into the peroneal sheath in two samples. Experienced surgeons can place intraarticular injections into a radiographically normal posterior subtalar joint without fluoroscopy with a high degree of accuracy. However, extravasation into the ankle or peroneal tendon sheath occurred in an unpredictable fashion, suggesting selectivity of injection placement is relatively limited without the use of fluoroscopy. Fluoroscopy may not be necessary for injections used solely for therapeutic purposes. However, if the injection is intended for diagnostic purposes or to assist in surgical decision-making or if the joint is abnormal, we recommend fluoroscopy to ensure the subtalar joint is the only anatomic structure impacted by the injection. PMID:18404293

  13. Hamstring tendons insertion - an anatomical study

    Directory of Open Access Journals (Sweden)

    Cristiano Antonio Grassi

    2013-09-01

    Full Text Available OBJECTIVE: To study the anatomy of the hamstring tendons insertion and anatomical rela-tionships. METHODS: Ten cadaver knees with medial and anterior intact structures were selected. The dissection was performed from anteromedial access to exposure of the insertion of the flexor tendons (FT, tibial plateau (TP and tibial tuberosity (TT. A needle of 40 × 12 and a caliper were used to measure the distance of the tibial plateau of the knee flexor tendons insertion at 15 mm from the medial border of the patellar tendon and tibial tuberosity to the insertion of the flexor tendons of the knee. The angle between tibial plateau and the insertion of the flexor tendons of the knee (A-TP-FT was calculated using Image Pro Plus software. RESULTS: The mean distance TP-FT was 41 ± 4.6 mm. The distance between the TT-FT was 6.88 ± 1 mm. The (A-TP-FT was 20.3 ± 4.9°. CONCLUSION: In the anterior tibial flexor tendons are about 40 mm from the plateau with an average of 20°.

  14. Employing anatomical knowledge in vertebral column labeling

    Science.gov (United States)

    Yao, Jianhua; Summers, Ronald M.

    2009-02-01

    The spinal column constitutes the central axis of human torso and is often used by radiologists to reference the location of organs in the chest and abdomen. However, visually identifying and labeling vertebrae is not trivial and can be timeconsuming. This paper presents an approach to automatically label vertebrae based on two pieces of anatomical knowledge: one vertebra has at most two attached ribs, and ribs are attached only to thoracic vertebrae. The spinal column is first extracted by a hybrid method using the watershed algorithm, directed acyclic graph search and a four-part vertebra model. Then curved reformations in sagittal and coronal directions are computed and aggregated intensity profiles along the spinal cord are analyzed to partition the spinal column into vertebrae. After that, candidates for rib bones are detected using features such as location, orientation, shape, size and density. Then a correspondence matrix is established to match ribs and vertebrae. The last vertebra (from thoracic to lumbar) with attached ribs is identified and labeled as T12. The rest of vertebrae are labeled accordingly. The method was tested on 50 CT scans and successfully labeled 48 of them. The two failed cases were mainly due to rudimentary ribs.

  15. [The meninges, an anatomical point of view].

    Science.gov (United States)

    Sakka, L; Chazal, J

    2005-03-01

    The meninges correspond to an anatomical concept. For the morphologist, the microscopic organization, the hypothetical presence of a subdural space, the nature of the interface between the deep meningeal layer and the nervous parenchyma in the perivascular spaces are the central issues. For the clinician, dynamic aspects of cerebrospinal fluid flow, secretion, and resorption are essential factors with practical consequences in terms of disease and patient management. Comparative anatomy, embryology, and organogenesis provide an interesting perspective for the descriptive and functional anatomy of the meninges. Usually considered as protective membranes, the meninges play a prominent role in the development and maintenance of the central nervous system. The meninges are in constant evolution, from their formation to senescence. The meninges present three layers in children and adults: the dura mater, the arachnoid and the pia mater. The cerebrospinal fluid is secreted by the choroid plexuses, flows through the ventricles and the subarachnoid space, and is absorbed by arachnoid granulations. Other sites of secretion and resorption are suggested by comparative anatomy and human embryology and organogenesis.

  16. Classifying anatomical subtypes of subjective memory impairment.

    Science.gov (United States)

    Jung, Na-Yeon; Seo, Sang Won; Yoo, Heejin; Yang, Jin-Ju; Park, Seongbeom; Kim, Yeo Jin; Lee, Juyoun; Lee, Jin San; Jang, Young Kyoung; Lee, Jong Min; Kim, Sung Tae; Kim, Seonwoo; Kim, Eun-Joo; Na, Duk L; Kim, Hee Jin

    2016-12-01

    We aimed to categorize subjective memory impairment (SMI) individuals based on their patterns of cortical thickness and to propose simple models that can classify each subtype. We recruited 613 SMI individuals and 613 age- and gender-matched normal controls. Using hierarchical agglomerative cluster analysis, SMI individuals were divided into 3 subtypes: temporal atrophy (12.9%), minimal atrophy (52.4%), and diffuse atrophy (34.6%). Individuals in the temporal atrophy (Alzheimer's disease-like atrophy) subtype were older, had more vascular risk factors, and scored the lowest on neuropsychological tests. Combination of these factors classified the temporal atrophy subtype with 73.2% accuracy. On the other hand, individuals with the minimal atrophy (non-neurodegenerative) subtype were younger, were more likely to be female, and had depression. Combination of these factors discriminated the minimal atrophy subtype with 76.0% accuracy. We suggest that SMI can be largely categorized into 3 anatomical subtypes that have distinct clinical features. Our models may help physicians decide next steps when encountering SMI patients and may also be used in clinical trials.

  17. Is the cervical fascia an anatomical proteus?

    Science.gov (United States)

    Natale, Gianfranco; Condino, Sara; Stecco, Antonio; Soldani, Paola; Belmonte, Monica Mattioli; Gesi, Marco

    2015-11-01

    The cervical fasciae have always represented a matter of debate. Indeed, in the literature, it is quite impossible to find two authors reporting the same description of the neck fascia. In the present review, a historical background was outlined, confirming that the Malgaigne's definition of the cervical fascia as an anatomical Proteus is widely justified. In an attempt to provide an essential and a more comprehensive classification, a fixed pattern of description of cervical fasciae is proposed. Based on the morphogenetic criteria, two fascial groups have been recognized: (1) fasciae which derive from primitive fibro-muscular laminae (muscular fasciae or myofasciae); (2) fasciae which derive from connective thickening (visceral fasciae). Topographic and comparative approaches allowed to distinguish three different types of fasciae in the neck: the superficial, the deep and the visceral fasciae. The first is most connected to the skin, the second to the muscles and the third to the viscera. The muscular fascia could be further divided into three layers according to the relationship with the different muscles.

  18. ANATOMICAL EVALUATION OF WOOD FIBRES Parkia gigantocarpa DUCKE

    Directory of Open Access Journals (Sweden)

    Patrícia Aparecida Rigatto Castelo

    2012-11-01

    Full Text Available This study aimed to determine the dimensions of the wood fibers of Parkia gigantocarpa Ducke and their relations to pulp production. For determining the dimensions of the fibers were sampled three experimental planting trees 14 years of age and collected discs,without bark of the tree on the basis of 25, 50, 75 and 100% of the height of commercial trees. The samples were extracted from the discs. The macerated material slides were stained with safranin aqueous solution of 1%. For each sample were taken 30 measures in length, width and lumen diameter. The fibers had an average length of 1,63 mm, width of 48,40 μm; lumen diameter of 37,52 μm; wall thickness of 5,44 μm. The indices were obtained from Runkel 0,29; wall fraction of 22,47%; flexibility coefficient of 77,53% and felting index of 33,67. According to the anatomical properties evaluated, the specie in question has the potential to be used in pulp production. However, some additional studies are necessary for its complete characterization.

  19. Anatomical Variations of the Circulus Arteriosus in Cadaveric Human Brains

    Directory of Open Access Journals (Sweden)

    S. A. Gunnal

    2014-01-01

    Full Text Available Objective. Circulus arteriosus/circle of Willis (CW is a polygonal anastomotic channel at the base of the brain which unites the internal carotid and vertebrobasilar system. It maintains the steady and constant supply to the brain. The variations of CW are seen often. The Aim of the present work is to find out the percentage of normal pattern of CW, and the frequency of variations of the CW and to study the morphological and morphometric aspects of all components of CW. Methods. Circulus arteriosus of 150 formalin preserved brains were dissected. Dimensions of all the components forming circles were measured. Variations of all the segments were noted and well photographed. The variations such as aplasia, hypoplasia, duplication, fenestrations, and difference in dimensions with opposite segments were noted. The data collected in the study was analyzed. Results. Twenty-one different types of CW were found in the present study. Normal and complete CW was found in 60%. CW with gross morphological variations was seen in 40%. Maximum variations were seen in the PCoA followed by the ACoA in 50% and 40%, respectively. Conclusion. As it confirms high percentage of variations, all surgical interventions should be preceded by angiography. Awareness of these anatomical variations is important in neurovascular procedures.

  20. Joint brain connectivity estimation from diffusion and functional MRI data

    Science.gov (United States)

    Chu, Shu-Hsien; Lenglet, Christophe; Parhi, Keshab K.

    2015-03-01

    Estimating brain wiring patterns is critical to better understand the brain organization and function. Anatomical brain connectivity models axonal pathways, while the functional brain connectivity characterizes the statistical dependencies and correlation between the activities of various brain regions. The synchronization of brain activity can be inferred through the variation of blood-oxygen-level dependent (BOLD) signal from functional MRI (fMRI) and the neural connections can be estimated using tractography from diffusion MRI (dMRI). Functional connections between brain regions are supported by anatomical connections, and the synchronization of brain activities arises through sharing of information in the form of electro-chemical signals on axon pathways. Jointly modeling fMRI and dMRI data may improve the accuracy in constructing anatomical connectivity as well as functional connectivity. Such an approach may lead to novel multimodal biomarkers potentially able to better capture functional and anatomical connectivity variations. We present a novel brain network model which jointly models the dMRI and fMRI data to improve the anatomical connectivity estimation and extract the anatomical subnetworks associated with specific functional modes by constraining the anatomical connections as structural supports to the functional connections. The key idea is similar to a multi-commodity flow optimization problem that minimizes the cost or maximizes the efficiency for flow configuration and simultaneously fulfills the supply-demand constraint for each commodity. In the proposed network, the nodes represent the grey matter (GM) regions providing brain functionality, and the links represent white matter (WM) fiber bundles connecting those regions and delivering information. The commodities can be thought of as the information corresponding to brain activity patterns as obtained for instance by independent component analysis (ICA) of fMRI data. The concept of information

  1. Asymmetric varus and valgus stability of the anatomic cadaver knee and the load sharing between collateral ligaments and bearing surfaces.

    Science.gov (United States)

    Wang, Xiaonan; Malik, Aamer; Bartel, Donald L; Wickiewicz, Thomas L; Wright, Timothy

    2014-08-01

    Knee joint stability is important in maintaining normal joint motion during activities of daily living. Joint instability not only disrupts normal motion but also plays a crucial role in the initiation and progression of osteoarthritis. Our goal was to examine knee joint coronal plane stability under varus or valgus loading and to understand the relative contributions of the mechanisms that act to stabilize the knee in response to varus-valgus moments, namely, load distribution between the medial and lateral condyles and the ligaments. A robot testing system was used to determine joint stability in human cadaveric knees as described by the moment versus angular rotation behavior under varus and valgus loads at extension and at 30 deg and 90 deg of flexion. The anatomic knee joint was more stable in response to valgus than varus moments, and stability decreased with flexion angle. The primary mechanism for providing varus-valgus stability was the redistribution of the contact force on the articular surfaces from both condyles to a single condyle. Stretching of the collateral ligaments provided a secondary stabilizing mechanism after the lift-off of a condyle occurred. Compressive loads applied across the knee joint, such as would occur with the application of muscle forces, enhanced the ability of the articular surface to provide varus-valgus moment, and thus, helped stabilize the joint in the coronal plane. Coupled internal/external rotations and anteroposterior and medial-lateral translations were variable and in the case of the rotations were often as large as the varus-valgus rotations created by the applied moment.

  2. Merging squared-magnitude approaches to DWI denoising: An adaptive Wiener filter tuned to the anatomical contents of the image.

    Science.gov (United States)

    Tristán-Vega, Antonio; Brion, Véronique; Vegas-Sánchez-Ferrero, Gonzalo; Aja-Fernández, Santiago

    2013-01-01

    We present a new method for denoising of Diffusion Weighted Images (DWI) that shares several desirable features of state-of-the-art proposals: 1) it works with the squared-magnitude signal, allowing for a closed-form formulation as a Linear Minimum Mean Squared Error (LMMSE) estimator, a.k.a. Wiener filter; 2) it jointly accounts for the DWI channels altogether, being able to unveil anatomical structures that remain hidden in each separated channel; 3) it uses a Non-Local Means (NLM)-like scheme to discriminate voxels corresponding to different fiber bundles, being able to enhance the anatomical structures of the DWI. We report extensive experiments evidencing the new approach outperforms several related methods for all the range of input signal-to-noise ratios (SNR). An open-source C++ implementation of the algorithm is also provided for the sake of reproducibility.

  3. From Disunited to Joint Action

    Directory of Open Access Journals (Sweden)

    Kaarina Mönkkönen

    2015-08-01

    Full Text Available Inter-organizational collaboration can be understood as a product of sets of conversations that draw on existing discourses. This article examines one public organization going through a fundamental organizational change. We describe the process of construction of organizational identity after a merger by using a model describing identified forms of interaction: (a formally together, (b unidirectional interaction, (c juxtapositions, (d construction of commonality, and (e the state of joint action. There is a link between the construction of a more collectively interpreted identity and the way in which people communicate, create relationships, and network. This article highlights the relevance and meaning of conscious identity work in the process: The management’s ability and willingness to create forums for dialogue and social interaction creates potential for construction of a collectively interpreted organizational identity and promotes cooperation and collaboration.

  4. Anatomical characteristics of Turkish endemic Stachys rupestrıs Montbret et Aucher ex Bentham (Lamiaceae

    Directory of Open Access Journals (Sweden)

    Baştürk Kaya

    2015-05-01

    Full Text Available Stachys rupestris Montbret et Aucher ex Bentham, is an endemic species that show deploying at Middle Taurus and Amanos mountains in Turkey. In this study, the stem and leaf anatomy of the individuals that were collected from Mersin-Aslanköy were investigated. The obtained data from the anatomical studies shows that S. rupestris represents the anatomical characteristics of Lamiaceae family. The stem in primer structure is quadrangular, with a vascular bundle at each corner and it has collenchyma layer in rich. The leaf and stem epidermises are covered by long and short glandular trichomes. Leaves are amphistomatic and dorsiventral; and the mesophyll are formed of 3-4 layered palisade parenchyma at the upper part and 3-4 layered spongy parenchyma – at the lower part.

  5. Biomechanics of the ankle joint and clinical outcomes of total ankle replacement.

    Science.gov (United States)

    Michael, Junitha M; Golshani, Ashkahn; Gargac, Shawn; Goswami, Tarun

    2008-10-01

    Until the 1970s ankle arthrodesis was considered to be the "gold-standard" to treat arthritis. But the low fusion rate of ankle arthrodeses along with the inability to achieve normal range of motion led to the growing interest in the development of total ankle replacements. Though the short-term outcomes were good, their long-term outcomes were not as promising. To date, most models do not exactly mimic the anatomical functionality of a natural ankle joint. Therefore, research is being conducted worldwide to either enhance the existing models or develop new models while understanding the intricacies of the joint more precisely. This paper reviews the anatomical and biomechanical aspects of the ankle joint. Also, the evolution and comparison of clinical outcomes of various total ankle replacements are presented.

  6. Temporomandibular Joint Idiopathic Condylar Resorptions – A CBCT based case-control study

    DEFF Research Database (Denmark)

    Kristensen, Kasper Dahl; Schmidt, Bjarke Hjalting; Stoustrup, Peter Bangsgaard

    Aim: To describe condylar deformation in the temporomandibular joint (TMJ) in subjects with idiopathic condylar resorptions (ICR) and compare these changes to a healthy control group. Materials and method: CBCT scans were analyzed using anatomical points on the skull to create a reference line....... Subsequently, anatomical structures were identified on the mandible to measure the condylar axial angle, the condylar neck angle as well as the condylar width, length, and height in 25 patients with ICR and 25 controls (50 joints in each group). Secondly, cross sections of the TMJs were evaluated for deformity...... %), cavitation defect (22 %), and flattering (22 %). In the control group condylar flattening was seen in 2 %. More than 70 % of the joints with deformity changes evaluated in the sagittal and the coronal plane respectively showed deformity changes along the entire condylar surface. Conclusion: The results...

  7. Registration of 6-DOFs electrogoniometry and CT medical imaging for 3D joint modeling.

    Science.gov (United States)

    Van Sint Jan, S; Salvia, P; Hilal, I; Sholukha, V; Rooze, M; Clapworthy, G

    2002-11-01

    The paper describes a method in which two data-collecting systems, medical imaging and electrogoniometry, are combined to allow the accurate and simultaneous modeling of both the spatial kinematics and the morphological surface of a particular joint. The joint of interest (JOI) is attached to a Plexiglas jig that includes four metallic markers defining a local reference system (R(GONIO)) for the kinematics data. Volumetric data of the JOI and the R(GONIO) markers are collected from medical imaging. The spatial location and orientation of the markers in the global reference system (R(CT)) of the medical-imaging environment are obtained by applying object-recognition and classification methods on the image dataset. Segmentation and 3D isosurfacing of the JOI are performed to produce a 3D model including two anatomical objects-the proximal and distal JOI segments. After imaging, one end of a custom-made 3D electrogoniometer is attached to the distal segment of the JOI, and the other end is placed at the R(GONIO) origin; the JOI is displaced and the spatial kinematics data is recorded by the goniometer. After recording, data registration from R(GONIO) to R(CT) occurred prior to simulation. Data analysis was performed using both joint coordinate system (JCS) and instantaneous helical axis (IHA).Finally, the 3D joint model is simulated in real time using the experimental kinematics data. The system is integrated into a computer graphics interface, allowing free manipulation of the 3D scene. The overall accuracy of the method has been validated with two other kinematics data collection methods including a 3D digitizer and interpolation of the kinematics data from discrete positions obtained from medical imaging. Validation has been performed on both superior and inferior radio-ulna joints (i.e. prono-supination motion). Maximal RMS error was 1 degrees and 1.2mm on the helical axis rotation and translation, respectively. Prono-supination of the forearm showed a total

  8. Importance of anatomically locating the infrapatellar branch of the saphenous nerve in reconstructing the anterior cruciate ligament using flexor tendons,

    Directory of Open Access Journals (Sweden)

    Julio Cesar Gali

    2014-12-01

    Full Text Available Objective:To describe the path of the infrapatellar branch of the saphenous nerve (IBSN using the medial joint line, anterior tibial tuberosity (ATT, tibial collateral ligament and a horizontal line parallel to the medial joint line that passes over the ATT, as reference points, in order to help surgeons to diminish the likelihood of injuring this nerve branch during reconstruction of the anterior cruciate ligament (ACL using flexor tendons.Methods:Ten frozen knees that originated from amputations were examined. Through anatomical dissection performed with the specimens flexed, we sought to find the IBSN, from its most medial and proximal portion to its most lateral and distal portion. Following this, the anatomical specimens were photographed and, using the ImageJ software, we determined the distance from the IBSN to the medial joint line and to a lower horizontal line going through the ATT and parallel to the first line. We also measured the angle of the direction of the path of the nerve branch in relation to this lower line.Results:The mean angle of the path of the nerve branch in relation to the lower horizontal line was 17.50 ±6.17°. The mean distance from the IBSN to the medial joint line was 2.61 ± 0.59 cm and from the IBSN to the lower horizontal line, 1.44 ±0.51 cm.Conclusion:The IBSN was found in all the knees studied. In three knees, we found a second branch proximal to the first one. The direction of its path was always from proximal and medial to distal and lateral. The IBSN was always proximal and medial to the ATT and distal to the medial joint line. The medial angle between its direction and a horizontal line going through the ATT was 17.50 ± 6.17°.

  9. Fiscal federalism and equity in the state joint local governments ...

    African Journals Online (AJOL)

    Fiscal federalism and equity in the state joint local governments' account: Oyo state in focus. ... Open Access DOWNLOAD FULL TEXT ... Data for this study were collected through secondary sources and descriptive and inferential statistical ...

  10. Effect of Calcium Phosphate–Hybridized Tendon Graft in Anatomic Single-Bundle ACL Reconstruction in Goats

    Science.gov (United States)

    Mutsuzaki, Hirotaka; Fujie, Hiromichi; Nakajima, Hiromi; Fukagawa, Makoto; Nomura, Shunsuke; Sakane, Masataka

    2016-01-01

    Background: We previously developed a novel technique using an alternate soaking process that improves tendon-bone healing by hybridizing the tendon graft with calcium phosphate (CaP). However, the effects of the CaP-hybridized tendon graft on anatomic single-bundle anterior cruciate ligament (ACL) reconstruction remain unclear. Purpose: To determine the effects of CaP-hybridized tendon grafts compared with untreated tendon grafts 6 months after anatomic single-bundle ACL reconstruction using a goat model. Study Design: Controlled laboratory study. Methods: Animals were divided into a CaP group (n = 5 goats) and a control group (n = 5 goats), and we analyzed (1) knee kinematics and in situ forces under applied anterior tibial loads of 50 N and internal tibial torque of 2.0 N·m in the grafts at full extension and at 60° and 90° of knee flexion, (2) the mean percentage of bone tunnel enlargement using computed tomography (CT), and (3) the histology of the tendon-bone interface. Results: The in situ forces under applied anterior tibial loads of 50 N at 60° and 90° of knee flexion in the CaP group were greater than those in the control group (P joint aperture sites of the anterior femoral and posterior tibial bone tunnel, was greater in the CaP group than that in the control group (P joint aperture site in both anterior femoral and posterior tibial tunnels 6 months after anatomic single-bundle ACL reconstruction in goats. The in situ forces under applied anterior tibial loads at greater flexion angles in the CaP group increased compared with controls. Clinical Relevance: Anatomic single-bundle ACL reconstruction using CaP-hybridized tendon grafts may lead to better postoperative knee function. PMID:27660798

  11. Physician supply and demand in anatomical pathology in Taiwan.

    Science.gov (United States)

    Hsu, Chih-Yi; Jung, Shih-Ming; Chuang, Shih-Sung

    2011-02-01

    Anatomical pathology was not popular in Taiwan a few decades ago, with a severe shortage of pathologists. However, there has been a steady increase in recent years, and now there is a threat of oversupply We evaluated supply and demand over the past three decades and compared the findings with other countries. We collected the enrollment data of pathologists and physicians from the Taiwan Society of Pathology, the Department of Health, Executive Yuan, and Taiwan Medical Association, and analyzed equivalent data from other countries. We sent questionnaires to pathology chiefs to inquire about future job vacancies. The number of pathologists has increased at an annual rate of 4.93% between 2004 and 2008, in contrast to 3.7% for all physicians. There has been a net annual increase of 12 pathologists in the past 13 years. The estimated average number of consultant posts per year was nine, which was only one-third of the average number of first-year residents (R1s). The number of pathologists/million population in Taiwan was 14.83, which was comparable to that in Japan and South Korea but much smaller than that in Canada and the United States. The ratio of pathologists to physicians in Taiwan was 0.97%, which was higher than that in Japan (0.68%) and South Korea (0.64%), but lower than in Canada (1.32%) and the United States (1.46%). On average, 1.79% of medical graduates chose pathology for their R1 training in Taiwan, which was higher than that in the United States (1.50%) and Canada (1.10-1.20%). Anatomical pathology is no longer a specialty that is facing a physician shortage in Taiwan, and there is now a relatively high pathologist/physician ratio among Asian countries. We suggest that a decrease in the number of R1s in pathology is needed to maintain a balance between supply and demand. Copyright © 2011 Formosan Medical Association & Elsevier. Published by Elsevier B.V. All rights reserved.

  12. Joint Robotics Program

    Science.gov (United States)

    2008-04-23

    Åèìáëáíáçå= oÉëÉ~êÅÜ=póãéçëáìã= JOINT ROBOTICS PROGRAM Published: 23 April 2008 by Joel Brown and Paul Varian 5th Annual Acquisition Research...3. DATES COVERED 00-00-2008 to 00-00-2008 4. TITLE AND SUBTITLE Joint Robotics Program 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM...ëóåÉêÖó=Ñçê=áåÑçêãÉÇ=ÅÜ~åÖÉ=======- 464 - = = Joint Robotics Program Presenter: Joel Brown, Defense Acquisition University Author: Paul Varian

  13. Total ankle joint replacement.

    Science.gov (United States)

    2016-02-01

    Ankle arthritis results in a stiff and painful ankle and can be a major cause of disability. For people with end-stage ankle arthritis, arthrodesis (ankle fusion) is effective at reducing pain in the shorter term, but results in a fixed joint, and over time the loss of mobility places stress on other joints in the foot that may lead to arthritis, pain and dysfunction. Another option is to perform a total ankle joint replacement, with the aim of giving the patient a mobile and pain-free ankle. In this article we review the efficacy of this procedure, including how it compares to ankle arthrodesis, and consider the indications and complications.

  14. Joints in steel buildings

    Directory of Open Access Journals (Sweden)

    Gabriel F. Valencia Clement

    2010-04-01

    Full Text Available Masonry and steel components used in constructing buildings are in a constant state of motion. Volumetric changes are produced by temperature variation and deformation resulting from static or dynamic loading and in some materials, such as masonry, due to moisture content. This article addresses means of determining when expansion and seismic joints are required and how to proportion and design appropriate joints, specifically in steel buildings. It does not cover the study of expansion joints in concrete structures, in masonry construction or in non-structural (architectural elements.

  15. [The anatomical revolution and the transition of anatomical conception in late imperial china].

    Science.gov (United States)

    Sihn, Kyu Hwan

    2012-04-30

    This paper aimed to examine the anatomical revolution from Yilingaicuo (Correcting the Errors of Medicine) and Quantixinlun(Outline of Anatomy and Physiology) in late imperial China. As the cephalocentrism which the brain superintend human operation of the mind was diffused in China since 16th century, the cephalocentrism and the cardiocentrism had competed for the hegemony of anatomical conception. Because of the advent of Yilingaicuo and Quantixinlun, the cephalocentrism became the main stream in the anatomical conception. The supporters of the Wang Yangming's Xinxue(the Learning of Heart and Mind) argued that the heart was the central organ of perception, sensitivity, and morality of the human body in medicine since 16th century. Even reformist and revolutionary intellectuals like Tan sitong and Mao zedong who had supported the Wang Yangming's Xinxue embraced the cephalocentrism in the late 19th century and the early 20th century. May Fourth intellectuals had not obsessed metaphysical interpretation of human body any more in the New Culture Movement in 1910s. They regarded human body as the object of research and writing. The anatomy was transformed into the instrumental knowledge for mutilation of the body. Yilingaicuo challenged the traditional conception of body, and Chinese intellectuals drew interest in the anatomy knowledge based on real mutilation. Quantixinlun based on Western medicine fueled a controversy about anatomy. Though new knowledge of anatomy was criticized by traditional Chinese medical doctors from the usefulness and morality of anatomy, nobody disavowed new knowledge of anatomy from the institutionalization of Western medicine in medical school. The internal development of cephalocentrism and positivism had influence on anatomy in China since 16th century. The advent of Yilingaicuo and Quantixinlun provided the milestone of new anatomy, though both sides represented traditional Chinese medicine and Western medicine respectively. They

  16. Applying the functional abnormality ontology pattern to anatomical functions

    Directory of Open Access Journals (Sweden)

    Hoehndorf Robert

    2010-03-01

    Full Text Available Abstract Background Several biomedical ontologies cover the domain of biological functions, including molecular and cellular functions. However, there is currently no publicly available ontology of anatomical functions. Consequently, no explicit relation between anatomical structures and their functions is expressed in the anatomy ontologies that are available for various species. Such an explicit relation between anatomical structures and their functions would be useful both for defining the classes of the anatomy and the phenotype ontologies accurately. Results We provide an ontological analysis of functions and functional abnormalities. From this analysis, we derive an approach to the automatic extraction of anatomical functions from existing ontologies which uses a combination of natural language processing, graph-based analysis of the ontologies and formal inferences. Additionally, we introduce a new relation to link material objects to processes that realize the function of these objects. This relation is introduced to avoid a needless duplication of processes already covered by the Gene Ontology in a new ontology of anatomical functions. Conclusions Ontological considerations on the nature of functional abnormalities and their representation in current phenotype ontologies show that we can extract a skeleton for an ontology of anatomical functions by using a combination of process, phenotype and anatomy ontologies automatically. We identify several limitations of the current ontologies that still need to be addressed to ensure a consistent and complete representation of anatomical functions and their abnormalities. Availability The source code and results of our analysis are available at http://bioonto.de.

  17. Collaborative regression-based anatomical landmark detection

    Science.gov (United States)

    Gao, Yaozong; Shen, Dinggang

    2015-12-01

    Anatomical landmark detection plays an important role in medical image analysis, e.g. for registration, segmentation and quantitative analysis. Among the various existing methods for landmark detection, regression-based methods have recently attracted much attention due to their robustness and efficiency. In these methods, landmarks are localised through voting from all image voxels, which is completely different from the classification-based methods that use voxel-wise classification to detect landmarks. Despite their robustness, the accuracy of regression-based landmark detection methods is often limited due to (1) the inclusion of uninformative image voxels in the voting procedure, and (2) the lack of effective ways to incorporate inter-landmark spatial dependency into the detection step. In this paper, we propose a collaborative landmark detection framework to address these limitations. The concept of collaboration is reflected in two aspects. (1) Multi-resolution collaboration. A multi-resolution strategy is proposed to hierarchically localise landmarks by gradually excluding uninformative votes from faraway voxels. Moreover, for informative voxels near the landmark, a spherical sampling strategy is also designed at the training stage to improve their prediction accuracy. (2) Inter-landmark collaboration. A confidence-based landmark detection strategy is proposed to improve the detection accuracy of ‘difficult-to-detect’ landmarks by using spatial guidance from ‘easy-to-detect’ landmarks. To evaluate our method, we conducted experiments extensively on three datasets for detecting prostate landmarks and head & neck landmarks in computed tomography images, and also dental landmarks in cone beam computed tomography images. The results show the effectiveness of our collaborative landmark detection framework in improving landmark detection accuracy, compared to other state-of-the-art methods.

  18. An anatomically oriented breast model for MRI

    Science.gov (United States)

    Kutra, Dominik; Bergtholdt, Martin; Sabczynski, Jörg; Dössel, Olaf; Buelow, Thomas

    2015-03-01

    Breast cancer is the most common cancer in women in the western world. In the breast cancer care-cycle, MRIis e.g. employed in lesion characterization and therapy assessment. Reading of a single three dimensional image or comparing a multitude of such images in a time series is a time consuming task. Radiological reporting is done manually by translating the spatial position of a finding in an image to a generic representation in the form of a breast diagram, outlining quadrants or clock positions. Currently, registration algorithms are employed to aid with the reading and interpretation of longitudinal studies by providing positional correspondence. To aid with the reporting of findings, knowledge about the breast anatomy has to be introduced to translate from patient specific positions to a generic representation. In our approach we fit a geometric primitive, the semi-super-ellipsoid to patient data. Anatomical knowledge is incorporated by fixing the tip of the super-ellipsoid to the mammilla position and constraining its center-point to a reference plane defined by landmarks on the sternum. A coordinate system is then constructed by linearly scaling the fitted super-ellipsoid, defining a unique set of parameters to each point in the image volume. By fitting such a coordinate system to a different image of the same patient, positional correspondence can be generated. We have validated our method on eight pairs of baseline and follow-up scans (16 breasts) that were acquired for the assessment of neo-adjuvant chemotherapy. On average, the location predicted and the actual location of manually set landmarks are within a distance of 5.6 mm. Our proposed method allows for automatic reporting simply by uniformly dividing the super-ellipsoid around its main axis.

  19. Simple facet joint repair with dynamic pedicular system: Technical note and case series

    Directory of Open Access Journals (Sweden)

    Ali Fahir Ozer

    2015-01-01

    Full Text Available Purpose: Facet joints are important anatomical structures for the stability of spine. Surgical or degenerative damage to a facet joint may lead to spinal instability and causes clinical problems. This article explains the importance of facet joints, reviews facet replacement systems, and describes a simple and effective method for facet replacement after surgical removal of facet joints. Materials and Methods: Ten patients were operated with the diagnosis of unilateral nerve root compression secondary to facet degeneration. The hypertrophic facet joints were removed with microsurgical techniques and the roots were decompressed. Then, a unilateral artificial facet joint was created using two hinged screws and a dynamic rod. Results: The clinical outcome of all the patients was determined good or excellent at second and last follow-up (mean 13.3 months controls using visual analog scale (VAS and Oswestry Disability Index (ODI scores. Radiological evaluations also demonstrated no implant-related complications. Conclusions: The authors suggest that, if removal of a facet joint is necessary to decompress the nerve roots, the joint can be replaced by a construct composed of two hinged screws connected by a dynamic rod. This simple system mimics the function of a normal facet joint and is an effective technique for unilateral facet joint replacement.

  20. New equations to calculate 3D joint centres in the lower extremities

    DEFF Research Database (Denmark)

    Sandau, Martin; Heimbürger, Rikke V; Villa, Chiara;

    2015-01-01

    Biomechanical movement analysis in 3D requires estimation of joint centres in the lower extremities and this estimation is based on extrapolation from markers placed on anatomical landmarks. The purpose of the present study was to quantify the accuracy of three established set of equations...... and provide new improved equations to predict the joint centre locations. The 'true' joint centres of the knee and ankle joint were obtained in vivo by MRI scans on 10 male subjects whereas the 'true' hip joint centre was obtained in 10 male and 10 female cadavers by CT scans. For the hip joint the errors...... ranged from 26.7 (8.9) to 29.6 (7.5) mm, for the knee joint 5.8 (3.1) to 22.6 (3.3) mm and for the ankle joint 14.4 (2.2) to 27.0 (4.6) mm. This differed significantly from the improved equations by which the error for the hip joint ranged from 8.2 (3.6) to 11.6 (5.6) mm, for the knee joint from 2.9 (2...

  1. Biomechanical analysis of press-extension technique on degenerative lumbar with disc herniation and staggered facet joint.

    Science.gov (United States)

    Du, Hong-Gen; Liao, Sheng-Hui; Jiang, Zhong; Huang, Huan-Ming; Ning, Xi-Tao; Jiang, Neng-Yi; Pei, Jian-Wei; Huang, Qin; Wei, Hui

    2016-05-01

    This study investigates the effect of a new Chinese massage technique named "press-extension" on degenerative lumbar with disc herniation and facet joint dislocation, and provides a biomechanical explanation of this massage technique. Self-developed biomechanical software was used to establish a normal L1-S1 lumbar 3D FE model, which integrated the spine CT and MRI data-based anatomical structure. Then graphic technique is utilized to build a degenerative lumbar FE model with disc herniation and facet joint dislocation. According to the actual press-extension experiments, mechanic parameters are collected to set boundary condition for FE analysis. The result demonstrated that press-extension techniques bring the annuli fibrosi obvious induction effect, making the central nucleus pulposus forward close, increasing the pressure in front part. Study concludes that finite element modelling for lumbar spine is suitable for the analysis of press-extension technique impact on lumbar intervertebral disc biomechanics, to provide the basis for the disease mechanism of intervertebral disc herniation using press-extension technique.

  2. Improved orthopedic arm joint

    Science.gov (United States)

    Dane, D. H.

    1971-01-01

    Joint permits smooth and easy movement of disabled arm and is smaller, lighter and less expensive than previous models. Device is interchangeable and may be used on either arm at the shoulder or at the elbow.

  3. Healthy Joints Matter

    Science.gov (United States)

    ... my joints more healthy? Definitions What can go wrong? Although you might think arthritis affects only older ... Discovery Into Health ® Home | Health Information | Research | Funding | News & Events | About Us | Portal en español | Asian-Language ...

  4. Joint Quantum Institute

    Data.gov (United States)

    Federal Laboratory Consortium — The Joint Quantum Institute (JQI) is pursuing that goal through the work of leading quantum scientists from the Department of Physics of the University of Maryland...

  5. A reusable anatomically segmented digital mannequin for public health communication.

    Science.gov (United States)

    Fujieda, Kaori; Okubo, Kosaku

    2016-01-01

    The ongoing development of world wide web technologies has facilitated a change in health communication, which has now become bi-directional and encompasses people with diverse backgrounds. To enable an even greater role for medical illustrations, a data set, BodyParts3D, has been generated and its data set can be used by anyone to create and exchange customised three-dimensional (3D) anatomical images. BP3D comprises more than 3000 3D object files created by segmenting a digital mannequin in accordance with anatomical naming conventions. This paper describes the methodologies and features used to generate an anatomically correct male mannequin.

  6. Anatomic changes due to interspecific grafting in cassava (Manihot esculenta).

    Science.gov (United States)

    Bomfim, N; Ribeiro, D G; Nassar, N M A

    2011-05-31

    Cassava rootstocks of varieties UnB 201 and UnB 122 grafted with scions of Manihot fortalezensis were prepared for anatomic study. The roots were cut, stained with safranin and alcian blue, and examined microscopically, comparing them with sections taken from ungrafted roots. There was a significant decrease in number of pericyclic fibers, vascular vessels and tyloses in rootstocks. They exhibited significant larger vessels. These changes in anatomic structure are a consequence of genetic effects caused by transference of genetic material from scion to rootstock. The same ungrafted species was compared. This is the first report on anatomic changes due to grafting in cassava.

  7. Anatomical Atlas of the Quail's Ear (Coturnix coturnix).

    Science.gov (United States)

    Bonsmann, A; Stoffel, M H; Burkhart, M; Hatt, J-M

    2016-10-01

    This study aims to enhance the anatomical knowledge of the ear of the adult quail (Coturnix coturnix) through the creation of a scaled 3D model utilizing data from micro-CT images. In addition, 17 annotated histological sections of the quail's ear are aligned to their 3D position in the model. The resulting anatomical atlas provides an intuitive insight into the 3D anatomy and can be used for medical education. The model also allows measuring anatomical structures and can thus serve as reference for the quail's auricular anatomy and as a basis to evaluate clinical diagnostic imaging results. © 2015 Blackwell Verlag GmbH.

  8. Simultaneous of Mid Third Clavicle Fracture and Type 3 Acromioclavicular Joint Dislocation; A Case Report

    Directory of Open Access Journals (Sweden)

    Saeed Solooki

    2014-03-01

    Full Text Available Simultaneous mid third clavicle fracture and acromioclavicular joint dislocation is a rare combination injury, as a result of high-energy trauma. We report a patient with a middle third clavicle fracture and ipsilateral grade three-acromioclavicular joint dislocation, which is a rare combination. The patient wanted to get back to work as soon as possible, so the fracture was fixed with reconstruction plate after open reduction and plate contouring; and acromioclavicular joint dislocation was reduced and fixed with two full threaded cancellous screws. One screw was inserted through the plate to the coracoid process. Clinical and radiographic finding revealed complete union of clavicle fracture and anatomical reduction of acromioclavicular joint with pain free full joint range of motion one year after operation.

  9. Simultaneous Middle Third Clavicle Fracture and Type 3 Acromioclavicular Joint Dislocation; A Case Report

    Science.gov (United States)

    Solooki, Saeed; Azad, Ali

    2014-01-01

    Simultaneous middle third clavicle fracture and acromioclavicular joint dislocation is a rare combination injury, as a result of high-energy trauma. We report a patient with a middle third clavicle fracture and ipsilateral grade three-acromioclavicular joint dislocation, which is a rare combination. The patient wanted to get back to work as soon as possible, so the fracture was fixed with reconstruction plate after open reduction and plate contouring; and acromioclavicular joint dislocation was reduced and fixed with two full threaded cancellous screws. One screw was inserted through the plate to the coracoid process. Clinical and radiographic finding revealed complete union of clavicle fracture and anatomical reduction of acromioclavicular joint with pain free full joint range of motion one year after operation. PMID:25207318

  10. Simultaneous of Mid Third Clavicle Fracture and Type 3 Acromioclavicular Joint Dislocation; A Case Report

    Directory of Open Access Journals (Sweden)

    Saeed Solooki

    2014-03-01

    Full Text Available   Simultaneous mid third clavicle fracture and acromioclavicular joint dislocation is a rare combination injury, as a result of high-energy trauma. We report a patient with a middle third clavicle fracture and ipsilateral grade three-acromioclavicular joint dislocation, which is a rare combination. The patient wanted to get back to work as soon as possible, so the fracture was fixed with reconstruction plate after open reduction and plate contouring; and acromioclavicular joint dislocation was reduced and fixed with two full threaded cancellous screws. One screw was inserted through the plate to the coracoid process. Clinical and radiographic finding revealed complete union of clavicle fracture and anatomical reduction of acromioclavicular joint with pain free full joint range of motion one year after operation.

  11. Concrete Pavement Joint Deterioration

    OpenAIRE

    2016-01-01

    Concrete pavements are an important part of our national infrastructure. In recent years the relatively small number of reported joints deteriorating prematurely in concrete pavements around Indiana has increased. Changes over the past 45 years in INDOT specification, pavement materials, designs and construction practices, and current de-icing materials were examined and related to the durability of concrete at the joints of existing pavements. A survey of concrete pavements across the state ...

  12. Joint involvement in Ochronosis

    OpenAIRE

    Biehl, Christoph; Thormann, U.; Madera, N.; Heiß, C

    2016-01-01

    Introduction: Ochronosis is a metabolic disorder that is usually associated with the typical brown-black colored urine and retention of phenol complexes in sclera and skin. Kidney and heart are also checked, the disease can also cause damage in these organs. The disease is less associated with degenerative changes in the joints of the limbs and the spine. Methods: We report on the progress of a patient with documented family history on alcaptonuria and joint involvement. In the age of 69 ...

  13. Spontaneous rupture of the distal iliopsoas tendon: clinical and imaging findings, with anatomic correlations.

    Science.gov (United States)

    Lecouvet, Frederic E; Demondion, Xavier; Leemrijse, Thibaut; Vande Berg, Bruno C; Devogelaer, Jean-Pierre; Malghem, Jacques

    2005-11-01

    We report the clinical and imaging findings in two elderly female patients with spontaneous rupture of the distal iliopsoas tendon from the lesser trochanter of the femur. We emphasize the key contribution of magnetic resonance (MR) imaging to this diagnosis and provide an anatomic correlation. Spontaneous rupture of the distal iliopsoas tendon should be kept in mind in the differential diagnosis of acute groin pain in the elderly. MR imaging enables positive diagnosis, by showing mass effect on the anterior aspect of the hip joint, proximal muscle thickening, and abnormal signal intensity, and by demonstrating interruption of the psoas tendon, whereas the distal insertion of the lateral portion of the iliacus muscle remains muscular and is preserved.

  14. Spontaneous rupture of the distal iliopsoas tendon: clinical and imaging findings, with anatomic correlations

    Energy Technology Data Exchange (ETDEWEB)

    Lecouvet, Frederic E.; Vande Berg, Bruno C.; Malghem, Jacques [Universite Catholique de Louvain, Department of Radiology and Medical Imaging, Saint Luc University Hospital, Brussels (Belgium); Demondion, Xavier [Centre Hospitalier Universitaire de Lille, Department of Bone Radiology and Laboratory of Anatomy, Lille (France); Leemrijse, Thibaut [Universite Catholique de Louvain, Department of Orthopedic Surgery, Saint Luc University Hospital, Brussels (Belgium); Devogelaer, Jean-Pierre [Universite Catholique de Louvain, Department of Rheumatology, Saint Luc University Hospital, Brussels (Belgium)

    2005-11-01

    We report the clinical and imaging findings in two elderly female patients with spontaneous rupture of the distal iliopsoas tendon from the lesser trochanter of the femur. We emphasize the key contribution of magnetic resonance (MR) imaging to this diagnosis and provide an anatomic correlation. Spontaneous rupture of the distal iliopsoas tendon should be kept in mind in the differential diagnosis of acute groin pain in the elderly. MR imaging enables positive diagnosis, by showing mass effect on the anterior aspect of the hip joint, proximal muscle thickening, and abnormal signal intensity, and by demonstrating interruption of the psoas tendon, whereas the distal insertion of the lateral portion of the iliacus muscle remains muscular and is preserved. (orig.)

  15. High pressure ceramic joint

    Science.gov (United States)

    Ward, Michael E.; Harkins, Bruce D.

    1993-01-01

    Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures.

  16. The ligaments of the canine hip joint revisited.

    Science.gov (United States)

    Casteleyn, C; den Ouden, I; Coopman, F; Verhoeven, G; Van Cruchten, S; Van Ginneken, C; Van Ryssen, B; Simoens, P

    2015-12-01

    Numerous conventional anatomical textbooks describe the canine hip joint, but many contradictions, in particular regarding the ligament of the femoral head, are present. This paper presents a brief overview of the different literature descriptions. These are compared with own observations that have resulted in a revised description of the anatomy of the ligament of the femoral head in the dog. To this purpose, the hip joints of 41 dogs, euthanized for reasons not related to this study and devoid of lesions related to hip joint pathology, were examined. It was observed that the ligament of the femoral head is not a single structure that attaches only to the acetabular fossa, as generally accepted, but it also connects to the transverse acetabular ligament and is complemented by a strong accessory ligament that courses in caudal direction to attach in the elongation of the acetabular notch that extends on the cranioventral surface of the body of the ischium. The description of this accessory ligament in conventional anatomical handbooks is incomplete. This description of the accessory ligament of the femoral head could support the research unravelling the etiopathogenesis of hip instability.

  17. [ANATOMICAL PLATE COMBINED WITH CORTICAL BONE PLATE ALLOGRAFTS FOR TREATMENT OF COMMINUTED FRACTURES OF FEMORAL CONDYLES].

    Science.gov (United States)

    Guo, Zhimin; Gong, Xingxing; Li, Yanwei; Qiu, Xiaochun; Zhang, Meng; Shangguan, Tiancheng; Ao, Qingfang; Liu, Qiang

    2015-01-01

    To summarize the effectiveness of anatomical plate combined with cortical bone plate allografts in the treatment of comminuted fractures of the femoral condyles. Between January 2008 and December 2012, 18 patients with comminuted fractures of the femoral condyles were treated, including 13 males and 5 females with an average age of 45 years (range, 23-65 years). Fractures were caused by traffic accident in 11 cases, by falling from height in 4 cases, and by the other in 3 cases. The locations were the left side in 7 cases and the right side in 11 cases. Of 18 fractures, 12 were open fractures and 6 were closed fractures. The mean time from injury to operation was 6 days (range, 4-15 days). The fixation was performed by anatomical plate combined with cortical bone plate allografts, and autograft bone or allogeneic bone grafting were used. Superficial local skin necrosis occurred in 1 case, and was cured after skin graft, and other incisions achieved primary healing. All patients were followed up 12-36 months (mean, 23 months). X-ray films showed that bone union was achieved within 3-12 months (5.6 months on average). No related complication occurred, such as fixation loosening, refracture, infection, or immunological rejection. According to Merchan et al. criteria for knee joint function evaluation, the results were excellent in 7 cases, good in 9 cases, fair in 1 case, and poor in 1 case at last follow-up; the excellent and good rate was 88.9%. Anatomical plate combined with cortical bone plate allograft fixation is a good method to treat comminuted fractures of the femoral condyles. This method can effectively achieve complete cortical bone on the inside of the femur as well as provide rigid fixation.

  18. COMPARATIVE STUDY OF ARTHROSCOPIC SINGLE BUNDLE ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION AND NON-ANATOMICAL DOUBLE BUNDLE WITH SINGLE TIBIAL TUNNEL ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION WITH SEMITENDINOSUS ± GRACILIS AUTOGRAFTS USING LAXOMETRY

    Directory of Open Access Journals (Sweden)

    Sivananda

    2016-01-01

    Full Text Available BACKGROUND The knee joint is the most commonly injured of all joints and the ACL is the most commonly injured ligament. Arthroscopic reconstruction of ACL has become gold standard in treating these injuries. AIM 1. To compare the short-term results of ACL reconstruction using single bundle (one Tibial + one Femoral tunnel and non-anatomical double-bundle (one Tibial + two Femoral tunnels techniques using Hamstrings (Semitendinosus ± Gracilis graft. 2. To evaluate ACL graft reconstruction stability measured by laxometry and to find out an association with clinical findings. MATERIAL & METHODS We performed a prospective study between 2014-2015 of 20 case of ACL injuries & compared single bundle reconstruction with Non – anatomical double Bundle reconstruction with semitendinosus ± Gracilis, Autograft using laxometry. CONCLUSION Arthroscopic Non-anatomical double ACL Reconstruction is Bio-mechanically stable reconstruction resembling anatomy of the ACL.

  19. Origin of the direct and reflected head of the rectus femoris: an anatomic study.

    Science.gov (United States)

    Ryan, John M; Harris, Joshua D; Graham, William C; Virk, Sohrab S; Ellis, Thomas J

    2014-07-01

    This study aimed to define the footprint of the direct and reflected heads of the rectus femoris and the relation of the anterior inferior iliac spine (AIIS) to adjacent neurovascular (lateral circumflex femoral artery and femoral nerve), bony (anterior superior iliac spine [ASIS]), and tendinous structures (iliopsoas). Twelve fresh-frozen cadaveric hip joints from 6 cadavers, average age of 44.5 (±9.9) years, were carefully dissected of skin and fascia to expose the muscular, capsular, and bony structures of the anterior hip and pelvis. Using digital calipers, measurements were taken of the footprint of the rectus femoris on the AIIS, superior-lateral acetabulum and hip capsule, and adjacent anatomic structures. The average dimensions of the footprint of the direct head of the rectus femoris were 13.4 mm (±1.7) × 26.0 mm (±4.1), whereas the dimensions of the reflected head footprint were 47.7 mm (±4.4) × 16.8 mm (±2.2). Important anatomic structures, including the femoral nerve, psoas tendon, and lateral circumflex femoral artery, were noted in proximity to the AIIS. The neurovascular structure closest to the AIIS was the femoral nerve (20.8 ± 3.4 mm). The rectus femoris direct and reflected heads originate over a broad area of the anterolateral pelvis and are in close proximity to critical neurovascular structures, and care must be taken to avoid them during hip arthroscopy. A thorough knowledge of the anatomy of the proximal rectus femoris is valuable for any surgical exposure of the anterior hip joint, particularly arthroscopic subspine decompression and open femoroacetabular impingement (FAI) surgery. Copyright © 2014 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

  20. Catalogue of National Health and Social Care Data Collections

    LENUS (Irish Health Repository)

    Green, Connor

    2012-02-01

    BACKGROUND: Three-dimensional data is required to have advanced knowledge of foot and ankle kinematics and morphology. However, studies have been difficult to compare due to a lack of a common coordinate system. Therefore, we present a means to define a coordinate frame in the foot and ankle and its clinical application. MATERIALS AND METHODS: We carried out ten CT scans in anatomically normal feet and segmented them in a general purpose segmentation program for grey value images. 3D binary formatted stereolithography files were then create and imported to a shape analysis program for biomechanics which was used to define a coordinate frame and carry out morphological analysis of the forefoot. RESULTS: The coordinate frame had axes standard deviations of 2.36 which are comparable to axes variability of other joint coordinate systems. We showed a strong correlation between the lengths of the metatarsals within and between the columns of the foot and also among the lesser metatarsal lengths. CONCLUSION: We present a reproducible method for construction of a coordinate system for the foot and ankle with low axes variability. CLINICAL RELEVANCE: To conduct meaningful comparison between multiple subjects the coordinate system must be constant. This system enables such comparison and therefore will aid morphological data collection and improve preoperative planning accuracy.

  1. Proximal Tibiofibular Joint: An overview

    Directory of Open Access Journals (Sweden)

    Tze Wang Chan

    2016-06-01

    Full Text Available Proximal tibiofibular joint is a frequently neglected joint which can be a source of lateral knee pain. Open surgery is the current mainstay of surgical management of proximal tibiofibular joint disorders. The proximal tibiofibular arthroscopy allows access to the joint and adjacent important ligamentous structures. This forms the basis of further development of arthroscopic procedures for a variety of pathologies.

  2. Etiologic analysis of 100 anatomically failed dacryocystorhinostomies

    Directory of Open Access Journals (Sweden)

    Dave TV

    2016-07-01

    Full Text Available Tarjani Vivek Dave, Faraz Ali Mohammed, Mohammad Javed Ali, Milind N Naik The Institute of Dacryology, L V Prasad Eye Institute, Hyderabad, India Background: The aim of this study was to assess the etiological factors contributing to the failure of a dacryocystorhinostomy (DCR. Patients and methods: Retrospective review was performed in 100 consecutive patients who were diagnosed with anatomically failed DCR at presentation to a tertiary care hospital over a 5-year period from 2010 to 2015. Patient records were reviewed for demographic data, type of past surgery, preoperative endoscopic findings, previous use of adjuvants such as intubation and mitomycin C, and intraoperative notes during the re-revision. The potential etiological factors for failure were noted. Results: Of the 100 patients with failed DCRs, the primary surgery was an external DCR in 73 and endoscopic DCR in 27 patients. Six patients in each group had multiple revisions. The mean ages at presentation in the external and endoscopic groups were 39.41 years and 37.19 years, respectively. All patients presented with epiphora. The most common causes of failure were inadequate osteotomy (69.8% in the external group and 85.1% in the endoscopic group, P=0.19 followed by inadequate or inappropriate sac marsupialization (60.2% in the external group and 77.7% in the endoscopic group, P=0.16 and cicatricial closure of the ostium (50.6% in the external group and 55.5% in the endoscopic group, P=0.83. The least common causes such as ostium granulomas and paradoxical middle turbinate (1.37%, n=1 were noted in the external group only. Conclusion: Inadequate osteotomy, incomplete sac marsupialization, and cicatricial closure of the ostium were the most common causes of failure and did not significantly differ in the external and endoscopic groups. Meticulous evaluation to identify causative factors for failure and addressing them are crucial for subsequent successful outcomes. Keywords: failed

  3. Anatomically-aided PET reconstruction using the kernel method

    Science.gov (United States)

    Hutchcroft, Will; Wang, Guobao; Chen, Kevin T.; Catana, Ciprian; Qi, Jinyi

    2016-09-01

    This paper extends the kernel method that was proposed previously for dynamic PET reconstruction, to incorporate anatomical side information into the PET reconstruction model. In contrast to existing methods that incorporate anatomical information using a penalized likelihood framework, the proposed method incorporates this information in the simpler maximum likelihood (ML) formulation and is amenable to ordered subsets. The new method also does not require any segmentation of the anatomical image to obtain edge information. We compare the kernel method with the Bowsher method for anatomically-aided PET image reconstruction through a simulated data set. Computer simulations demonstrate that the kernel method offers advantages over the Bowsher method in region of interest quantification. Additionally the kernel method is applied to a 3D patient data set. The kernel method results in reduced noise at a matched contrast level compared with the conventional ML expectation maximization algorithm.

  4. Anatomical practices of preserving, handling and management of ...

    African Journals Online (AJOL)

    Anatomical practices of preserving, handling and management of human ... out with the aim of proposing an effective system of taking care of human remains. ... includes established lifeless or dead whole human body otherwise known as ...

  5. Anatomical terminology and nomenclature: past, present and highlights.

    Science.gov (United States)

    Kachlik, David; Baca, Vaclav; Bozdechova, Ivana; Cech, Pavel; Musil, Vladimir

    2008-08-01

    The anatomical terminology is a base for medical communication. It is elaborated into a nomenclature in Latin. Its history goes back to 1895, when the first Latin anatomical nomenclature was published as Basiliensia Nomina Anatomica. It was followed by seven revisions (Jenaiensia Nomina Anatomica 1935, Parisiensia Nomina Anatomica 1955, Nomina Anatomica 2nd to 6th edition 1960-1989). The last revision, Terminologia Anatomica, (TA) created by the Federative Committee on Anatomical Terminology and approved by the International Federation of Associations of Anatomists, was published in 1998. Apart from the official Latin anatomical terminology, it includes a list of recommended English equivalents. In this article, major changes and pitfalls of the nomenclature are discussed, as well as the clinical anatomy terms. The last revision (TA) is highly recommended to the attention of not only teachers, students and researchers, but also to clinicians, doctors, translators, editors and publishers to be followed in their activities.

  6. Functional and anatomical properties of human visual cortical fields.

    Science.gov (United States)

    Zhang, Shouyu; Cate, Anthony D; Herron, Timothy J; Kang, Xiaojian; Yund, E William; Bao, Shanglian; Woods, David L

    2015-04-01

    Human visual cortical fields (VCFs) vary in size and anatomical location across individual subjects. Here, we used functional magnetic resonance imaging (fMRI) with retinotopic stimulation to identify VCFs on the cortical surface. We found that aligning and averaging VCF activations across the two hemispheres provided clear delineation of multiple retinotopic fields in visual cortex. The results show that VCFs have consistent locations and extents in different subjects that provide stable and accurate landmarks for functional and anatomical mapping. Interhemispheric comparisons revealed minor differences in polar angle and eccentricity tuning in comparable VCFs in the left and right hemisphere, and somewhat greater intersubject variability in the right than left hemisphere. We then used the functional boundaries to characterize the anatomical properties of VCFs, including fractional anisotropy (FA), magnetization transfer ratio (MTR) and the ratio of T1W and T2W images and found significant anatomical differences between VCFs and between hemispheres.

  7. Anatomical features of the sternum in a Kenyan population.

    African Journals Online (AJOL)

    The Romans

    Further research is needed to correlate these findings. ... Key words: Sternum; Anatomical features; Median sternotomy; Sternal puncture ... cardiothoracic approach in Kenya used for repair of .... Ogendo for scientific critique, and staff of gross.

  8. Discrepancy between cervical disc prostheses and anatomical cervical dimensions

    Directory of Open Access Journals (Sweden)

    Sinan Karaca

    2016-10-01

    Companies that produce CTDP should take care of the anatomical dimensions and generate different sizes of CTDP. Spine surgeon should be familiar with the size mismatch in CTDP that may affect the clinical and radiological outcome of the surgery.

  9. Anatomical Consideration in Catheter Ablation of Idiopathic Ventricular Arrhythmias.

    Science.gov (United States)

    Yamada, Takumi; Kay, G Neal

    2016-01-01

    Idiopathic ventricular arrhythmias (VAs) are ventricular tachycardias (VTs) or premature ventricular contractions (PVCs) with a mechanism that is not related to myocardial scar. The sites of successful catheter ablation of idiopathic VA origins have been progressively elucidated and include both the endocardium and, less commonly, the epicardium. Idiopathic VAs usually originate from specific anatomical structures such as the ventricular outflow tracts, aortic root, atrioventricular (AV) annuli, papillary muscles, Purkinje network and so on, and exhibit characteristic electrocardiograms based on their anatomical background. Catheter ablation of idiopathic VAs is usually safe and highly successful, but can sometimes be challenging because of the anatomical obstacles such as the coronary arteries, epicardial fat pads, intramural and epicardial origins, AV conduction system and so on. Therefore, understanding the relevant anatomy is important to achieve a safe and successful catheter ablation of idiopathic VAs. This review describes the anatomical consideration in the catheter ablation of idiopathic VAs.

  10. Radiographic analysis of shoulder anatomical arthroplasty

    Energy Technology Data Exchange (ETDEWEB)

    Merolla, Giovanni [Unit of Shoulder and Elbow Surgery, ' D. Cervesi' Hospital, L. Van Beethoven 46 Street, 47841 Cattolica (Italy)], E-mail: gmerolla@shouldertech.it; Di Pietto, Francesco; Romano, Stefania [Department of Diagnostic Imaging, ' A. Cardarelli' Hospital, Naples (Italy); Paladini, Paolo; Campi, Fabrizio; Porcellini, Giuseppe [Unit of Shoulder and Elbow Surgery, ' D. Cervesi' Hospital, L. Van Beethoven 46 Street, 47841 Cattolica (Italy)

    2008-10-15

    Arthroplasty is the standard treatment for advanced shoulder osteoarthritis. Modern prostheses designs have modular features whose size, shaft/head and body morphology can be adjusted. Total Shoulder Arthroplasty (TSA) provides better results. A complete X-ray follow-up is essential to assess the results and evaluate the survival rates of a shoulder prosthesis. Antero-posterior at 40 deg. in both internal and external rotation (true AP view) and axillary view are recommended to assess the following parameters: orientation and translation of the humeral component, offset, size and height of the humeral head, acromio-humeral distance, distribution and fixation of the cement, stress shielding and cortical resorption, radiolucent lines, subsidence and tilt, glenoid wear and 'bone stock', prostheses instability, glenoid component shift. Shoulder hemiarthroplasty can lead to glenoid wear; the true AP film at 40 deg. of internal rotation provides the best profile of gleno-humeral joint to depict glenoid erosion. Shift of the glenoid component in TSA is identified as tilting or medial migration on true AP and axillary views in the early postoperative period (1-2 months) and at minimum of 2 years. An exhaustive radiographic analysis remains essential to monitor the prosthetic implant and detect early and late complications or risk factors of prosthetic loosening.

  11. [The effect of central anatomical single-bundle versus anatomical double-bundle reconstruction of the anterior cruciate ligament on knee stability. a clinical study].

    Science.gov (United States)

    Komzák, M; Hart, R; Smíd, P; Puskeiler, M

    2014-01-01

    PURPOSE OF THE STUDY A comparison of the efficacy of central anatomical single-bundle (CASB) reconstruction with that of double-bundle (DB) repair of the anterior cruciate ligament (ACL) in relation to knee stability in anteroposterior translation (APT), internal rotation (IR) and external rotation (ER) of the joint. MATERIAL AND METHODS A total of 40 patients were evaluated; 20 had ACL reconstruction by the CASB technique using hamstrings and 20 underwent DB repair surgery. The average age was 31.3 years, and the group included 22 men and 18 women with 19 right and 21 left knees. The KT-1000 test was used to assess the amount of APT in the knee and rotational deviations were measured by the Rolimeter. In the DB patients, measurements were performed before surgery (on joints with ACL injury), then after reconstruction of the anteromedial (AM) or the posterolateral (PL) bundle and subsequently after repair of both ACL bundles. The CASB patients were assessed before and after graft insertion. RESULTS The average APT value was 18.5 mm for the pre-operative knees and it fell to 8.9 mm after AM bundle reconstruction. However, when the PL bundle was inserted in the first place, the average APT value was 13.1 mm only. The average values recorded after the DB and CASB reconstructions were 6.1 mm and 9.1 mm, respectively. The average IR range of motion in the pre-operative joints was 18.6 degrees. After AM bundle reconstruction it was 13.9 degrees and after PL bundle repair it was 15.3 degrees. In DB reconstruction the average IR value achieved 10.4 degrees, and in CASB repair surgery it was 13.7 degrees. The average ER range of motion in the pre-operative joints was 17.8 degrees. After AM bundle reconstruction it was 14.5 degrees and after PL bundle repair it was 14.9 degrees. In DB reconstruction the average ER value achieved 11.4 degrees, and in CASB repair surgery it was 14.5 degrees. DISCUSSION Rotational stability of the knee after ACL reconstruction is one of the

  12. Statistical 3D prostate imaging atlas construction via anatomically constrained registration

    Science.gov (United States)

    Rusu, Mirabela; Bloch, B. Nicolas; Jaffe, Carl C.; Rofsky, Neil M.; Genega, Elizabeth M.; Feleppa, Ernest; Lenkinski, Robert E.; Madabhushi, Anant

    2013-03-01

    Statistical imaging atlases allow for integration of information from multiple patient studies collected across different image scales and modalities, such as multi-parametric (MP) MRI and histology, providing population statistics regarding a specific pathology within a single canonical representation. Such atlases are particularly valuable in the identification and validation of meaningful imaging signatures for disease characterization in vivo within a population. Despite the high incidence of prostate cancer, an imaging atlas focused on different anatomic structures of the prostate, i.e. an anatomic atlas, has yet to be constructed. In this work we introduce a novel framework for MRI atlas construction that uses an iterative, anatomically constrained registration (AnCoR) scheme to enable the proper alignment of the prostate (Pr) and central gland (CG) boundaries. Our current implementation uses endorectal, 1.5T or 3T, T2-weighted MRI from 51 patients with biopsy confirmed cancer; however, the prostate atlas is seamlessly extensible to include additional MRI parameters. In our cohort, radical prostatectomy is performed following MP-MR image acquisition; thus ground truth annotations for prostate cancer are available from the histological specimens. Once mapped onto MP-MRI through elastic registration of histological slices to corresponding T2-w MRI slices, the annotations are utilized by the AnCoR framework to characterize the 3D statistical distribution of cancer per anatomic structure. Such distributions are useful for guiding biopsies toward regions of higher cancer likelihood and understanding imaging profiles for disease extent in vivo. We evaluate our approach via the Dice similarity coefficient (DSC) for different anatomic structures (delineated by expert radiologists): Pr, CG and peripheral zone (PZ). The AnCoR-based atlas had a CG DSC of 90.36%, and Pr DSC of 89.37%. Moreover, we evaluated the deviation of anatomic landmarks, the urethra and

  13. Solder Joint Health Monitoring Testbed System

    Science.gov (United States)

    Delaney, Michael M.

    2009-01-01

    The density and pin count for Field Programmable Gate Arrays (FPGAs) has been increasing, and has exceeded current methods of solder joint inspection, making early detection of failures more problematic. These failures are a concern for both flight safety and maintenance in commercial aviation. Ridgetop Group, Inc. has developed a method for detecting solder joint failures in real time. The NASA Dryden Flight Research Center is developing a set of boards to test this method in ground environmental and accelerated testing as well as flight test on a Dryden F-15 or F-18 research aircraft. In addition to detecting intermittent and total solder joint failures, environmental data on the boards, such as temperature and vibration, will be collected and time-correlated to aircraft state data. This paper details the technical approach involved in the detection process, and describes the design process and products to date for Dryden s FPGA failure detection boards.

  14. Orbitofrontal sulcal and gyrus pattern in human: an anatomical study

    OpenAIRE

    Thiago Pereira Rodrigues; Mariana Athaniel Silva Rodrigues; Daniel de Araújo Paz; Marcos Devanir Silva da Costa; Ricardo Silva Centeno; Feres Eduardo Chaddad Neto; Sergio Cavalheiro

    2015-01-01

    The anatomical characterization of the orbitofrontal cortex in human is limited in literature instead of many functional and clinical studies involving it. Objective Anatomically define the orbitofrontal region aiming to possible neurosurgical treatments and unify the scientific nomenclature as well. Method We analyze eighty four human hemispheres using a surgical microscope. Then we chose four hemispheres and dissect them according to Klinger’ technique. Results We found five main sulc...

  15. [Lymphoscintigrams with anatomical landmarks obtained with vector graphics].

    Science.gov (United States)

    Rubini, Giuseppe; Antonica, Filippo; Renna, Maria Antonia; Ferrari, Cristina; Iuele, Francesca; Stabile Ianora, Antonio Amato; Losco, Matteo; Niccoli Asabella, Artor

    2012-11-01

    Nuclear medicine images are difficult to interpret because they do not include anatomical details. The aim of this study was to obtain lymphoscintigrams with anatomical landmarks that could be easily interpreted by General Physicians. Traditional lymphoscintigrams were processed with Adobe© Photoshop® CS6 and converted into vector images created by Illustrator®. The combination with a silhouette vector improved image interpretation, without resulting in longer radiation exposure or acquisition times.

  16. The "anatomic" view of the suprarenals in medical imaging.

    Science.gov (United States)

    Sénécail, B; Colin, D; Person, H; Vallée, B; Lefèvre, C

    1994-01-01

    Based on coordinates derived from three series of anatomic sections, the authors propose a view for tomographic investigation, applicable in MRI and ultrasound, which reconstructs the ideal image of the suprarenal gland in its quadrilateral as described by Testut. This "anatomic" view is 45 degrees vertical and oblique, intermediate between the sagittal and frontal views, which it can advantageously replace. A new aspect of suprarenal tomography, recalling the image of a triskele, is described in the context of this view.

  17. Anatomical and functional segments of the deltoid muscle.

    Science.gov (United States)

    Sakoma, Yoshimasa; Sano, Hirotaka; Shinozaki, Nobuhisa; Itoigawa, Yoshiaki; Yamamoto, Nobuyuki; Ozaki, Toshifumi; Itoi, Eiji

    2011-02-01

    Previous studies showed that the insertion of the intramuscular tendons of the deltoid muscle formed three discrete lines. The purpose of the present study was to establish a new dividing method of the deltoid muscle into various anatomical segments based on the distribution of the intramuscular tendons with their insertions (anatomical study). We further hoped to clarify the relationship between the anatomical segments and their activity pattern assessed by positron emission tomography with [¹⁸F]-2-fluoro-deoxyglucose (FDG-PET; PET study). Sixty cadaveric shoulders were investigated in the anatomical study. Three tendinous insertions of the deltoid muscle to the humerus were identified. Then, the intramuscular tendons were traced from their humeral insertions to the proximal muscular origins. The extent of each anatomical segment of the muscle including its origin and insertion was determined through careful dissection. Six healthy volunteers were examined using FDG-PET for the PET study. PET images were obtained after exercise of elevation in the scapular plane. On the PET images, margins of each anatomical segment of the deltoid muscle were determined using magnetic resonance images. Then, the standardized uptake value in each segment was calculated to quantify its activity. The anatomical study demonstrated that the deltoid muscle was divided into seven segments based on the distribution of its intramuscular tendons. The PET study revealed that the intake of FDG was not uniform in the deltoid muscle. The area with high FDG intake corresponded well to the individual muscular segments separated by the intramuscular tendons. We conclude that the deltoid muscle has seven anatomical segments, which seem to represent the functional units of this muscle.

  18. Anatomic anterior cruciate ligament reconstruction using an individualized approach

    Directory of Open Access Journals (Sweden)

    Carola F. van Eck

    2014-01-01

    Full Text Available Anterior cruciate ligament (ACL reconstruction is one of the most commonly performed orthopaedic procedures. Recently, there has been a shift in interest towards reconstruction techniques that more closely restore the native anatomy of the ACL. This review paper discusses our approach to individualized anatomic ACL reconstruction, including the anatomy of the ACL, the physical exam, imaging modalities, the surgical technique for anatomic reconstruction including pre- and intraoperative considerations and our postoperative rehabilitation protocol.

  19. VARIATIONS OF MUSCLE PLANTARIS: ANATOMICAL AND CLINICAL IMPLICATIONS

    OpenAIRE

    Jayasree; Ashalatha; Smitha S; Jenish

    2016-01-01

    AIMS AND OBJECTIVES Plantaris is a small fusiform muscle with a long tendon, in the superficial group of flexors of the posterior compartment of leg. Though considered as a vestigial muscle, plantaris is of much importance both from anatomical and clinical point of view, at the same time commanding interest from a phylogenetic perspective also. The muscle is known to present several anatomical variations with respect to its occurrence, origin, course, relations and insertion. ...

  20. Ultrasound of the rotator cuff with MRI and anatomic correlation

    Energy Technology Data Exchange (ETDEWEB)

    Rutten, Matthieu J.C.M. [Department of Radiology, Jeroen Bosch Hospital, Nieuwstraat 34, 5211 NL ' s-Hertogenbosch (Netherlands)]. E-mail: M.Rutten@JBZ.nl; Maresch, Bas J. [Department of Radiology, Hospital Gelderse Vallei, Willy Brandtlaan 10, 6710 HN Ede (Netherlands)]. E-mail: MareschB@zgv.nl; Jager, Gerrit J. [Department of Radiology, Jeroen Bosch Hospital, Nieuwstraat 34, 5211 NL ' s-Hertogenbosch (Netherlands)]. E-mail: G.Jager@JBZ.nl; Blickman, Johan G. [Department of Radiology, University Medical Center Nijmegen, Geert Grooteplein Zuid 18, 6500 HB Nijmegen (Netherlands)]. E-mail: J.Blickman@rad.umcn.nl; Holsbeeck, Marnix T. van [Department of Radiology, Henry Ford Hospital, 2799 W Grand Boulevard, Detroit, MI 48202 (United States)]. E-mail: vanholsbeeck@comcast.net

    2007-06-15

    Magnetic resonance imaging and high-resolution ultrasound (US) are frequently used for the detection of rotator cuff tears. The diagnostic yield of US is influenced by several factors as technique, knowledge of the imaging characteristics of anatomic and pathologic findings and of pitfalls. The purpose of this article is to illustrates that the standardized high-resolution US examination of the shoulder covers the entire rotator cuff and correlates with MR imaging and anatomic sections.

  1. Arthrography of the lumber facet joint and facet block

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Hee Kyung; Chung, Tae Sub; Kim, Young Soo; Park, Hyung Chun; Moon, Jae Ho; Suh, Jung Ho; Kim, Dong Ik [Yonsei University College of Medicine, Seoul (Korea, Republic of)

    1988-12-15

    In spite of numerous clinical and patho-anatomical studied made in the past, there are still different opinions concerning the mechanism of low back pain. We have focused attention on the posterior structures as an alternative source of low back pain with sciatica. So we have studied and analyzed the finding of arthrography of facet joint and effect of the injection of methyprednisolone acetate suspension (Depomedrol) 20mg into the each facet joint. Our results are as follows: 1. Abnormal findings of facet joint arthrogram were degenerative osteoarthritis of facet joint (70.5%), synovial cyst (11.8%), accessory bone (11.8%), and spondylolysis (5.9%). 2. The mean facet angulations of patients of facet syndrome were abnormal on lower lumbar facet joint in 9 of 13 cases (69.2%). 3. On initial assessment, 11 of 17 cases (64.7%) showed complete relief and one month later, 6 of 11 cases (35.3%) showed continuous relief, after steroid injection.

  2. Radiographic parameters of the hip joint from birth to adolescence

    Energy Technology Data Exchange (ETDEWEB)

    Than, P.; Kranicz, J.; Bellyei, A. [Dept. of Orthopaedics, Univ. of Pecs, Medical Faculty, Ifjusag utja (Hungary); Sillinger, T. [Dept. of Orthopaedics, Szt Gyorgy County Hospital, Szekesfehervar (Hungary)

    2004-03-01

    Background: Various qualitative and quantitative radiological geometrical parameters can be of great help when assessing dysplasia of the hip joint and in understanding developmental processes of the infant hip. There are few data on the normal values of the hip joint at different ages. Objective: To perform radiographic measurements on hip joints considered to be anatomically normal and to provide data for each age group, thus describing features of the radiographic development of the hip. Materials and methods: Radiographs were examined from 355 children (age 0-16 years) undergoing examination for scoliosis (long film), urography or plain abdominal radiography. Qualitative and quantitative signs were observed and measured, focusing on the Hilgenreiner, Wiberg and Idelberger angles and the decentric distance. Results: Before the age of 9 years measurable data from neighbouring age groups differed significantly, indicating typical radiological changes of the joint. For the same age range, qualitative changes could also be observed. After 9 years of age, radiological development of the normal hip joint during childhood is much slower. (orig.)

  3. Anatomical traits related to stress in high density populations of Typha angustifolia L. (Typhaceae).

    Science.gov (United States)

    Corrêa, F F; Pereira, M P; Madail, R H; Santos, B R; Barbosa, S; Castro, E M; Pereira, F J

    2017-03-01

    Some macrophytes species show a high growth potential, colonizing large areas on aquatic environments. Cattail (Typha angustifolia L.) uncontrolled growth causes several problems to human activities and local biodiversity, but this also may lead to competition and further problems for this species itself. Thus, the objective of this study was to investigate anatomical modifications on T. angustifolia plants from different population densities, once it can help to understand its biology. Roots and leaves were collected from natural populations growing under high and low densities. These plant materials were fixed and submitted to usual plant microtechnique procedures. Slides were observed and photographed under light microscopy and images were analyzed in the UTHSCSA-Imagetool software. The experimental design was completely randomized with two treatments and ten replicates, data were submitted to one-way ANOVA and Scott-Knott test at p<0.05. Leaves from low density populations showed higher stomatal density and index. These modifications on stomatal characteristics were more evident on the leaf abaxial surface. Plants from low density populations showed thicker mesophyll and higher proportion of aerenchymal area. Roots from low density populations showed a higher proportion of the vascular cylinder. Whereas, plants from higher density populations showed greater thickness of the endodermis, exodermis, phloem and root cortex. Higher density populations showed a higher proportion of aerenchymal gaps in the root cortex. Therefore, cattail plants from populations growing under high density population show anatomical traits typical of plants under stress, which promotes the development of less functional anatomical modifications to aquatic environments.

  4. Anatomically corrected malposition of the great arteries--case reports and a review.

    Science.gov (United States)

    Oku, H; Shirotani, H; Yokoyama, T; Kawai, J; Nishioka, T; Noritake, S; Shinohara, T; Nakamura, Y; Sunakawa, A; Oka, H; Saga, T; Horio, S; Wakaki, N

    1982-06-01

    Anatomically corrected malposition of the great arteries (ACM) is an extremely uncommon cardiac disease in which the great arteries arise from their appropriate ventricles despite abnormal spatial interrelations. Two patients with this malformation underwent successful surgical intervention for their associated anomalies. One was of situs solitus, d-loop and l-malposition and the other of situs inversus, l-loop and d-malposition of the great arteries. Fifty-three cases with accurate anatomical description were collected from the literature, and anatomical characteristics and associated anomalies were investigated. From the standpoint of anatomy and hemodynamics, we considered that ACM should be classified into atrioventricular concordant ACM, atrioventricular discordant ACM and ACM with situs ambiguus. Heart position and conus were variable. Dextrocardia and mesocardia were frequent. Bilateral conus was characteristic in concordant ACM, and subpulmonary conus was prominent in discordant ACM. The hypoplasia of the right heart and juxtaposition of the atrial appendages were in high incidence in cases of ACM. Surgical intervention was also discussed.

  5. Leaf anatomical variation in Cephalaria laevigata (dipsacaceae under different ecological conditions

    Directory of Open Access Journals (Sweden)

    Jakovljević Ksenija

    2014-01-01

    Full Text Available The results of a multivariate morphometric study of leaf anatomical characters in different, geographically distant populations of the taxon Cephalaria laevigata from Serbia and Romania are presented with the aim to reveal the trends of population differentiation. Analyses were performed on a cross-section of 105 leaves collected from 10 populations. In order to establish the overall morphological variation and relationships between individuals from all populations, principal component analyses and canonical discriminant analysis were performed. Clustering analyses were carried out to explore whether the observed anatomical differences are a result of adaptive responses. Regression analysis was performed to identify the level of correlation between leaf anatomical characters and basic orographic, geological and bioclimatic habitat characteristics. Unexpectedly, in most of the characters there was discrepancy between leaf anatomy and climatic conditions, and the characters did not show significant regularities in the variability of their dimension neither in the vertical profile nor in relation to geological substrate. [Projekat Ministarstva nauke Republike Srbije, br. 173030

  6. Toledo School of Translators and their influence on anatomical terminology.

    Science.gov (United States)

    Arráez-Aybar, Luis-Alfonso; Bueno-López, José-L; Raio, Nicolas

    2015-03-01

    Translation facilitates transmission of knowledge between cultures. The fundamental transfer of anatomic terminology from the Ancient Greek and Islamic Golden Age cultures, to medieval Latin Christendom took place in the so-called Toledo School of Translators in the 12th-13th centuries. Translations made in Toledo circulated widely across Europe. They were the foundation of scientific thinking that was born in the boards of first universities. In Toledo, Gerard of Cremona translated Avicenna's Canon of Medicine, the key work of Islamic Golden Age of medicine. Albertus Magnus, Mondino de Luzzi and Guy de Chauliac, the leading authors of anatomical Latin words in the Middle Ages, founded their books on Gerard's translations. The anatomical terms of the Canon retain auctoritas up to the Renaissance. Thus, terms coined by Gerard such as diaphragm, orbit, pupil or sagittal remain relevant in the current official anatomical terminology. The aim of the present paper is to bring new attention to the highly significant influence that the Toledo School of Translators had in anatomical terminology. For this, we shall review here the onomastic origins of a number of anatomical terms (additamentum; coracoid process; coxal; false ribs; femur; panniculus; spondylus; squamous sutures; thorax; xiphoid process, etc.) which are still used today.

  7. Anatomical Findings in Patients with Infective Endocarditis Diagnosed at Autopsy

    Directory of Open Access Journals (Sweden)

    Miguel Angel Serra Valdés

    2013-12-01

    Full Text Available Background: Infective endocarditis continues to challenge modern medicine despite its rare occurrence in the general population. Its incidence depends on risk groups. Correlation of anatomical and pathological findings with clinical and epidemiological elements may explain the current features of this condition. Objective: to describe the anatomical features of patients with infective endocarditis diagnosed at autopsy. Methods: A descriptive study including cases of infective endocarditis diagnosed at autopsy between 1986 and 2008 was conducted in the Provincial Clinical-Surgical Hospital Celia Sanchez, Granma. The variables analyzed were: age, sex, previous anatomical lesions, location of vegetations, multi-organ embolic infarcts and embolic abscesses, complications, culture of lesions and direct causes of death. Results: frequency of infective endocarditis diagnosed at necropsy ranged annually from 0.4 to 1.5%. Native valve endocarditis without previous damage was the most frequent. The anatomical findings were more common in the left side of the heart. Right-sided nosocomial endocarditis accounted for almost a third of the deceased patients and risk factors were identified. Embolic lesions affecting various organs, systemic complications and direct causes of death showed acute infectious endocarditis. The most common pathogen was Staphylococcus aureus. Conclusion: knowing the anatomical findings may contribute to the understanding of the clinical and epidemiological aspects of this condition. Correlation between anatomical and clinical findings was low; therefore difficulties in establishing the diagnosis during life are inferred.

  8. The linguistic roots of Modern English anatomical terminology.

    Science.gov (United States)

    Turmezei, Tom D

    2012-11-01

    Previous research focusing on Classical Latin and Greek roots has shown that understanding the etymology of English anatomical terms may be beneficial for students of human anatomy. However, not all anatomical terms are derived from Classical origins. This study aims to explore the linguistic roots of the Modern English terminology used in human gross anatomy. By reference to the Oxford English Dictionary, etymologies were determined for a lexicon of 798 Modern English gross anatomical terms from the 40(th) edition of Gray's Anatomy. Earliest traceable language of origin was determined for all 798 terms; language of acquisition was determined for 747 terms. Earliest traceable languages of origin were: Classical Latin (62%), Classical Greek (24%), Old English (7%), Post-Classical Latin (3%), and other (4%). Languages of acquisition were: Classical Latin (42%), Post-Classical Latin (29%), Old English (8%), Modern French (6%), Classical Greek (5%), Middle English (3%), and other (7%). While the roots of Modern English anatomical terminology mostly lie in Classical languages (accounting for the origin of 86% of terms), the anatomical lexicon of Modern English is actually much more diverse. Interesting and perhaps less familiar examples from these languages and the methods by which such terms have been created and absorbed are discussed. The author suggests that awareness of anatomical etymologies may enhance the enjoyment and understanding of human anatomy for students and teachers alike.

  9. Joint ventures in medical services.

    Science.gov (United States)

    Rublee, D A

    1987-01-01

    This paper is an overview of joint-venture activity in healthcare, describing trends in joint ventures and raising issues for physicians. The purposes are to discuss the major current facets of joint-venture alliances in healthcare and to identify policy issues that arise from the trend to use joint ventures as an organizational tool. Speculation is made about the future role of joint ventures in the organization of healthcare.

  10. Temporomandibular joint disorders.

    Science.gov (United States)

    Buescher, Jennifer J

    2007-11-15

    Temporomandibular joint disorders are common in adults; as many as one third of adults report having one or more symptoms, which include jaw or neck pain, headache, and clicking or grating within the joint. Most symptoms improve without treatment, but various noninvasive therapies may reduce pain for patients who have not experienced relief from self-care therapies. Physical therapy modalities (e.g., iontophoresis, phonophoresis), psychological therapies (e.g., cognitive behavior therapy), relaxation techniques, and complementary therapies (e.g., acupuncture, hypnosis) are all used for the treatment of temporomandibular joint disorders; however, no therapies have been shown to be uniformly superior for the treatment of pain or oral dysfunction. Noninvasive therapies should be attempted before pursuing invasive, permanent, or semi-permanent treatments that have the potential to cause irreparable harm. Dental occlusion therapy (e.g., oral splinting) is a common treatment for temporomandibular joint disorders, but a recent systematic review found insufficient evidence for or against its use. Some patients with intractable temporomandibular joint disorders develop chronic pain syndrome and may benefit from treatment, including antidepressants or cognitive behavior therapy.

  11. Distal radioulnar joint injuries

    Directory of Open Access Journals (Sweden)

    Binu P Thomas

    2012-01-01

    Full Text Available Distal radioulnar joint is a trochoid joint relatively new in evolution. Along with proximal radioulnar joint , forearm bones and interosseous membrane, it allows pronosupination and load transmission across the wrist. Injuries around distal radioulnar joint are not uncommon, and are usually associated with distal radius fractures,fractures of the ulnar styloid and with the eponymous Galeazzi or Essex_Lopresti fractures. The injury can be purely involving the soft tissue especially the triangular fibrocartilage or the radioulnar ligaments.The patients usually present with ulnar sided wrist pain, features of instability, or restriction of rotation. Difficulty in carrying loads in the hand is a major constraint for these patients. Thorough clinical examination to localize point of tenderness and appropriate provocative tests help in diagnosis. Radiology and MRI are extremely useful, while arthroscopy is the gold standard for evaluation. The treatment protocols are continuously evolving and range from conservative, arthroscopic to open surgical methods. Isolated dislocation are uncommon. Basal fractures of the ulnar styloid tend to make the joint unstable and may require operative intervention. Chronic instability requires reconstruction of the stabilizing ligaments to avoid onset of arthritis. Prosthetic replacement in arthritis is gaining acceptance in the management of arthritis.

  12. Angular Rate Sensor Joint Kinematics Applications

    Directory of Open Access Journals (Sweden)

    Gregory W. Hall

    1997-01-01

    Full Text Available High speed rotary motion of complex joints were quantified with triaxial angular rate sensors. Angular rate sensors were mounted to rigid links on either side of a joint to measure angular velocities about three orthogonal sensor axes. After collecting the data, the angular velocity vector of each sensor was transformed to local link axes and integrated to obtain the incremental change in angular position for each time step. Using the angular position time histories, a transformation matrix between the reference frame of each link was calculated. Incremental Eulerian rotations from the transformation matrix were calculated using an axis system defined for the joint. Summation of the incremental Eulerian rotations produced the angular position of the joint in terms of the standard axes. This procedure is illustrated by applying it to joint motion of the ankle, the spine, and the neck of crash dummies during impact tests. The methodology exhibited an accuracy of less than 5% error, improved flexibility over photographic techniques, and the ability to examine 3-dimensional motion.

  13. Sex differences in anatomical parameters of acetabulum among asymptomatic Serbian population

    Directory of Open Access Journals (Sweden)

    Jeremić Dejan

    2011-01-01

    Full Text Available Background/Aim. Anatomical parameters of the bony components of the hip joint are essential for better understanding of etiopathogenesis of diseases like primary osteoarthrosis of the hip joint. The aim of this reserch was to examine the normal acetabular morphometry in Serbian population and to determine whether there are sex differences in anatomical parameters of the acetabulum among asymptomatic subjects. Methods. Pelvic radiographics of 320 adult asymptomatic patients (640 hips were analyzed in 170 men and 150 women to determine the morphology of the acetabulum in Serbian population. For each hip the center edge angle of Wiberg (CEA, the acetabular angle of Sharp (AA, acetabular depth (AD, acetabular roof obliquity (ARO and roof angle (RA were measured. Results. The following average measurements for acetabulum geometry were obtained (X ± SD: CEA - 33.5 ± 6.5° (33.6 ± 5.8° in male, 33.3 ± 6.9° in female, AA - 38.0 ± 3.8° (37.5 ± 3.6° in male, 38.5 ± 3.9° in female, AD - 11.9 ± 2.8 mm (12.5 ± 2.7 mm in male, 11.2 ± 2.7 mm in female, ARO - 7.6 ± 5.7° (6.2 ± 4.9° in male, 9.0 ± 6.0° in female and RA - 18.4 ± 10.0° (19.6 ± 8.5° in male, 17.1 ± 9.5° in female. There were significant differences in the CEA, AA, AD, ARO and RA related to gender (p < 0.01, t-test. Conclusion. There are significant gender differences in Serbian population for all the examined anatomical parameters of acetabulum. We found sex-related differences in acetabular morphology, female acetabulum being marginally more dysplastic than male acetabulum. There is also a clear tendency of female hips to be more dysplastic than male ones.

  14. Anatomical measurement of tibia and fibula

    Institute of Scientific and Technical Information of China (English)

    WANG Zejun; FANG Gang; SHI Ershuan

    2015-01-01

    Objective:To observe the morphological index related to the tabular and fibular in adults and to provide anatomy references to the fracture fixation and autologous bone graft. Methods: The tibia and fibula of 52 adults (52 left sides and 48 right side) were measured morphologically. Results: The length of the tibia was (35. 7±1. 77)cm, the distance from the nutrient foremen to the point of interiorankle was (23. 8±1. 46)cm, the length width and depth of fibula notch were (2. 6±0. 59)cm, (2. 7±0. 63)cm and (0. 6±0. 22)cm respectively, the area of interior ankle articular surface in trbia was (2. 5±1. 56)cm2 and the area of lower articular surface was (8. 6±1. 02)cm2. The length of the fibula was (35. 2±1. 72) cm, the distance from the nutrient foremen to exteri-or ankle point was(19. 3±2. 04)cm, the length width and depth of lateral malleolus sulcus were (2. 6±0. 59)cm, (2. 7±0. 63)cm and (0. 6±0. 22)cm respectively, the area of head of fibula articular surface was(1. 4±0. 51)cm2 and the area of ankle articular surface was (3. 7±0. 41)cm2. The difference in height between medial malleolus and lateral malleolus was(1. 88±0. 42)cm. Conclusions:Morphology of the trbia and fibula should be taken into consideration when selecting fixation method and set, grafting autologous bone and rebuilding the bone and joint.

  15. Posterior cervical foraminotomy: anatomic study in cadavers

    Directory of Open Access Journals (Sweden)

    Luizio Augusto Arantes Júnior

    2014-03-01

    Full Text Available OBJECTIVE: This study was designed to use different segments of the cervical spine in cadavers to determine how much lateral mass should be resected for adequate foraminal decompression. METHODS: Six cadavers were used. The region of the cervical spine from C1 to the C7-T1 transition was dissected and exposed. The lateral mass of each vertebra was measured bilaterally before the foraminotomy in the following segments: C2-C3, C3-C4, C4-C5, C5-C6 and C6-C7. The procedure was performed with a high-speed drill and through surgical microscopy. Three foraminotomies were performed (F1, F2, F3 in each level. Lateral masses were measured after foraminotomy procedures and compared to the initial measurement, creating a percentage of lateral mass needed for decompression.. The value of the entire surface was defined as 100%. RESULTS: There was a statistical difference between the amounts of the resected lateral mass through each foraminotomy (F1, F2, F3 at the same level. However, there was no statistical significant difference among the different levels. The average percentage of resection of the lateral masses in F2 were 27.7% at C2-C3, 24.8% at C3-C4, 24.4% at C4-C5 and 23.8% and 31.2% at C5-C6 and C6-C7, respectively. In F3, the level that needed greater resection of the lateral masses was C6-C7 level, where the average resection ranged between 41.2% and 47.9%. CONCLUSION: In all segments studied, the removal of approximately 24 to 32% of the facet joint allowed adequate exposure of the foraminal segment, with visualization of the dural sac and the exit of the cervical root.

  16. Acromioclavicular joint dislocations: radiological correlation between Rockwood classification system and injury patterns in human cadaver species.

    Science.gov (United States)

    Eschler, Anica; Rösler, Klaus; Rotter, Robert; Gradl, Georg; Mittlmeier, Thomas; Gierer, Philip

    2014-09-01

    The classification system of Rockwood and Young is a commonly used classification for acromioclavicular joint separations subdividing types I-VI. This classification hypothesizes specific lesions to anatomical structures (acromioclavicular and coracoclavicular ligaments, capsule, attached muscles) leading to the injury. In recent literature, our understanding for anatomical correlates leading to the radiological-based Rockwood classification is questioned. The goal of this experimental-based investigation was to approve the correlation between the anatomical injury pattern and the Rockwood classification. In four human cadavers (seven shoulders), the acromioclavicular and coracoclavicular ligaments were transected stepwise. Radiological correlates were recorded (Zanca view) with 15-kg longitudinal tension applied at the wrist. The resulting acromio- and coracoclavicular distances were measured. Radiographs after acromioclavicular ligament transection showed joint space enlargement (8.6 ± 0.3 vs. 3.1 ± 0.5 mm, p acromioclavicular joint space width increased to 16.7 ± 2.7 vs. 8.6 ± 0.3 mm, p acromioclavicular joint lesions higher than Rockwood type I and II. The clinical consequence for reconstruction of low-grade injuries might be a solely surgical approach for the acromioclavicular ligaments or conservative treatment. High-grade injuries were always based on additional structural damage to the coracoclavicular ligaments. Rockwood type V lesions occurred while muscle attachments were intact.

  17. Combined scintigraphic and radiographic diagnosis of bone and joint diseases

    Energy Technology Data Exchange (ETDEWEB)

    Bahk, Yong Whee (Catholic Medical Coll., Seoul (Korea, Republic of). Dept. of Radiology and Nuclear Medicine)

    1994-01-01

    This book is intended to emphasize the tremendous value of pinhole scintigraphy in diagnosing nearly the whole spectrum of bone and joint diseases. Pinhole scintigraphy discloses anatomic and pathologic as well as chemical alterations in greater detail, permitting analytical interpretation and raising the sensitivity as well. Infections, nonspecific bone inflammation, rheumatic disorders, metabolic and endocrine bone diseases, trauma, and both primary tumors and metastasis can be effectively and specifically examined. By improving sensitivity, many false negative readings can be avoided in early bone metastasis, synovitis, enthesopathies, bone contusion, etc. (orig.)

  18. Collection Mapping and Collection Development.

    Science.gov (United States)

    Murray, William; And Others

    1985-01-01

    Describes the use of collection mapping to assess media collections of Aurora, Colorado, Public Schools. Case studies of elementary, middle, and high school media centers describe materials selection and weeding and identify philosophies that library collections should support school curriculum, and teacher-library media specialist cooperation in…

  19. Studies of welded joints

    Directory of Open Access Journals (Sweden)

    J. M. Krupa

    2010-07-01

    Full Text Available Studies of a welded joint were described. The joint was made as a result of the reconstruction of a truss and one of the possible means to make a repair. The studies were of a simulation character and were targeted at the detection of welding defects and imperfections thatshould be eliminated in a real structure. A model was designed and on this model the tests and examinations were carried out. The modelwas made under the same conditions as the conditions adopted for repair. It corresponded to the real object in shape and dimensions, and in the proposed technique of welding and welding parameters. The model was composed of five plates joined together with twelve beads.The destructive and non-destructive tests were carried out; the whole structure and the respective welds were also examined visually. Thedefects and imperfections in welds were detected by surface methods of inspection, penetration tests and magnetic particle flaw detection.The model of the welded joint was prepared by destructive methods, a technique that would never be permitted in the case of a realstructure. For the investigations it was necessary to cut out the specimens from the welded joint in direction transverse to the weld run. The specimens were subjected to metallographic examinations and hardness measurements. Additionally, the joint cross-section was examined by destructive testing methods to enable precise determination of the internal defects and imperfections. The surface methods were applied again, this time to determine the severity of welding defects. The analysis has proved that, fabricated under proper conditions and with parameters of the welding process duly observed, the welded joint has good properties and repairs of this type are possible in practice.

  20. A comparison of the performance of anatomical MRI and DTI in diagnosing carpal tunnel syndrome

    Energy Technology Data Exchange (ETDEWEB)

    Koh, Sung Hye [Department of Radiology, Hallym University Sacred Heart Hospital, Gwanpyeong-ro 170 beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 431-796 (Korea, Republic of); Department of Radiology, Kangwon National University Hospital, Baengnyeong-ro 156, Chuncheon-Si, Gangwon-Do, 200-722 (Korea, Republic of); Kwon, Bong Cheol, E-mail: hallymradms@gmail.com [Department of Orthopedic Surgery, Hallym University Sacred Heart Hospital, Gwanpyeong-ro 170 beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 431-796 (Korea, Republic of); Park, Chanyeong [Department of Radiology, Hallym University Sacred Heart Hospital, Gwanpyeong-ro 170 beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 431-796 (Korea, Republic of); Hwang, Su Yeon; Lee, Joon Woo [Department of Radiology, Seoul National University Bundang Hospital, 82, Gumi-ro, 173 beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-707 (Korea, Republic of); Kim, Sam Soo [Department of Radiology, Kangwon National University Hospital, Baengnyeong-ro 156, Chuncheon-Si, Gangwon-Do, 200-722 (Korea, Republic of)

    2014-11-15

    Highlights: • The good parameters of both scans in CTS diagnosis were CSA(P1), FA(P1) and FA(P0). • Median nerve signal intensity and flexor retinacular bowing were not significantly different between CTS and controls. • The prestenotic swelling of median nerve of CTS was demonstrated as relatively large CSA and low FA value at P1 level. • Combination of both scans in evaluation of carpal tunnel increased diagnostic performance, and provided merits of both scans. - Abstract: Purpose: To compare the performance of anatomical magnetic resonance imaging (MRI) with that of diffusion tensor imaging (DTI) in the diagnosis of carpal tunnel syndrome (CTS). Materials and methods: We performed 3T anatomical MRI and DTI on 42 patients and 42 age-matched controls. The median nerve cross-sectional area (CSA), relative median nerve signal intensity, and palmar bowing of the flexor retinaculum, assessed with anatomical MRI, and fractional anisotropy (FA) and apparent diffusion coefficient of the median nerve, assessed with DTI, were measured at four locations: the hamate level, the pisiform level (P0), the level located 1 cm proximal to the P0 level (P1), and the distal radioulnar joint level (DR). Adding the ratios and differences of the median nerve parameters between the measurements at the DR and other locations to the diagnostic parameters, we evaluated the area under the receiver operating characteristic curves (AUCs) of all the diagnostic parameters of both scans. Results: The AUCs of FA(P1) (0.814) and FA(P0) (0.824) in DTI were larger than the largest AUC for anatomical MRI, CSA(P1) (0.759). However, the receiver operating characteristics of the three parameters were not significantly different (P > 0.1). The sensitivity and specificity of CSA(P1) (76.2% and 73.8%) and FA(P1) (73.8% and 76.2%) increased after inclusive and exclusive combination to 90.5% each. Conclusion: The individual performances of both scans were not significantly different in diagnosing CTS

  1. To move or not to move: cranial joints in European gekkotans and lacertids, an osteological and histological perspective.

    Science.gov (United States)

    Mezzasalma, Marcello; Maio, Nicola; Guarino, Fabio Maria

    2014-03-01

    Lepidosaurs are frequently described as having highly kinetic skulls, and different forms of cranial kinesis have been described as being characteristic of their radiation. The model of amphikinesis proposed by Frazzetta, J Morphol 1962; 111:287-319, which was long considered a synapomorphy of the large suborder Sauria, is now much debated given its uncertain distribution among the various lizard taxa and the lack of data about its morphological correlates. In this article, we analyze the anatomical correlates of different forms of cranial kinesis, with particular regard to the putative saurian amphikinesis, describing the possible diverse skull movements of several species of European gekkotans (Hemidactylus turcicus, Mediodactylus kotschyi, and Tarentola mauritanica) and lacertids (Lacerta agilis, L. bilineata, Podarcis muralis, P. siculus, and Teira dugesii). Using serial and whole-mount histology, we found clear differences between gekkotans and lacertids in the structure of several cranial joints underlining the existence of two degrees of intracranial mobility. The lacertid species possess the anatomical features for streptostyly (quadrate joints) and metakinesis (parietal-supraoccipital and parabasisphenoid-pterygoid joints) and lack the anatomical correlates for mesokinesis (mobility of frontal-parietal and palatine-pterygoid joints) and amphikinesis (coupled mesokinesis, metakinesis, and streptostyly). In contrast, geckos present all the anatomical correlates for amphikinesis as described by the traditional quadratic crank model. Finally, we present a comprehensive summary of the different forms of squamate cranial kinesis, advancing two alternative hypotheses about the evolutionary origin of amphikinesis.

  2. Collecting Rocks

    Institute of Scientific and Technical Information of China (English)

    孙铮

    2007-01-01

    My hobby is collecting rocks.It is very special,isn’t it?I began to collect rocks about four years ago.I usually go hiking in the mountains,or near the river to look for rocks.When I find a rock,I pick it up and clean it with the brush and water.Then I put it into my bag.Most of the rocks I have collected are quartzite~*.They are really

  3. Joint for deployable structures

    Science.gov (United States)

    Craighead, N. D., II; Preliasco, R. J.; Hult, T. D. (Inventor)

    1985-01-01

    A joint is described for connecting a pair of beams to pivot them between positions in alignment or beside one another, which is of light weight and which operates in a controlled manner. The joint includes a pair of fittings and at least one center link having opposite ends pivotally connected to opposite fittings and having axes that pass through centerplates of the fittings. A control link having opposite ends pivotally connected to the different fittings controls their relative orientations, and a toggle assemly holds the fittings in the deployed configuration wherein they are aligned. The fittings have stops that lie on one side of the centerplane opposite the toggle assembly.

  4. Transversely Compressed Bonded Joints

    DEFF Research Database (Denmark)

    Hansen, Christian Skodborg; Schmidt, Jacob Wittrup; Stang, Henrik

    2012-01-01

    The load capacity of bonded joints can be increased if transverse pressure is applied at the interface. The transverse pressure is assumed to introduce a Coulomb-friction contribution to the cohesive law for the interface. Response and load capacity for a bonded single-lap joint was derived using...... non-linear fracture mechanics. The results indicated a good correlation between theory and tests. Furthermore, the model is suggested as theoretical base for determining load capacity of bonded anchorages with transverse pressure, in externally reinforced concrete structures....

  5. Flexible human collective wisdom.

    Science.gov (United States)

    Juni, Mordechai Z; Eckstein, Miguel P

    2015-12-01

    Group decisions typically outperform individual decisions. But how do groups combine their individual decisions to reach their collective decisions? Previous studies conceptualize collective decision making using static combination rules, be it a majority-voting rule or a weighted-averaging rule. Unknown is whether groups adapt their combination rules to changing information environments. We implemented a novel paradigm for which information obeyed a mixture of distributions, such that the optimal Bayesian rule is nonlinear and often follows minority opinions, while the majority rule leads to suboptimal but above chance performance. Using perceptual (Experiment 1) and cognitive (Experiment 2) signal-detection tasks, we switched the information environment halfway through the experiments to a mixture of distributions without informing participants. Groups gradually abandoned the majority rule to follow any minority opinion advocating signal presence with high confidence. Furthermore, groups with greater ability to abandon the majority rule achieved higher collective-decision accuracies. It is important to note that this abandonment was not triggered by performance loss for the majority rule relative to the first half of the experiment. Our results propose a new theory of human collective decision making: Humans make inferences about how information is distributed across individuals and time, and dynamically alter their joint decision algorithms to enhance the benefits of collective wisdom.

  6. Bone and Joint Infections in Children: Septic Arthritis.

    Science.gov (United States)

    Agarwal, Anil; Aggarwal, Aditya N

    2016-08-01

    The pathological invasion of a joint and subsequent inflammation is known as septic arthritis. The knee and hip are the most frequently involved joints. Staphylococcus aureus is the most common cause of septic arthritis in children. An acute onset of illness with an inflamed painful joint and restricted movements and inability to use joint (pseudoparalysis) clinically indicates septic arthritis. The diagnosis is difficult in a neonate or young child where refusal to feed, crying, discomfort during change of diaper (if hip is involved) or attempted joint movement may be the only findings. Fever and other systemic signs may also be absent in neonates. Septic arthritis is diagnosed clinically, supported by appropriate radiological and laboratory investigations. The peripheral blood white cell count is frequently raised with a predominance of polymorphonuclear cells. The acute phase reactants such as C-reactive protein (CRP) and erythrocyte sedimentation rate (ESR) are often markedly raised. Ultrasonography and MRI are preferred investigations in pediatric septic arthritis. Determination of infecting organism in septic arthritis is the key to the correct antibiotic choice, treatment duration and overall management. Joint aspirate and/or blood culture should be obtained before starting antibiotic treatment. Several effective antibiotic regimes are available for managing septic arthritis in children. Presence of large collections, thick pus, joint loculations and pus evacuating into surrounding soft tissues are main indications for surgical drainage. Joint aspiration can be a practical alternative in case the lesion is diagnosed early, with uncomplicated presentations and superficial joints.

  7. The anatomical relationship between the position of the auriculotemporal nerve and mandibular condyle.

    Science.gov (United States)

    Fernandes, Paulo R B; de Vasconsellos, Henrique A; Okeson, Jeffrey P; Bastos, Ricardo L; Maia, Mey L T

    2003-07-01

    Head, neck, face, and ear pains are commonly associated with disorders of the temporomandibular joint (TMJ). Several theories have been proposed regarding the functional relationship of the TMJ and the associated structures, and how they might contribute to certain painful conditions. This study was conducted to determine the anatomic relationship of the auriculotemporal nerve to the middle meningeal artery and the mandibular condyle. Forty human cadaver temporomandibular joints were dissected to locate the precise position of the auriculotemporal nerve to the mandibular condyle. The study findings revealed a significant variation in the relationship of the auriculotemporal nerve to the middle meningeal artery. The auriculotemporal nerve was found to be between 10-13 mm inferior to the superior surface of the condyle and 1-2 mm posterior to the neck of the condyle. The nerve was not found to be in a position that would likely create an entrapment with adjacent tissues. These findings may assist the clinician to locate the most appropriate injection site for an auriculotemporal nerve block.

  8. The 360 photography: a new anatomical insight of the sphenoid bone. Interest for anatomy teaching and skull base surgery.

    Science.gov (United States)

    Jacquesson, Timothée; Mertens, Patrick; Berhouma, Moncef; Jouanneau, Emmanuel; Simon, Emile

    2017-01-01

    Skull base architecture is tough to understand because of its 3D complex shape and its numerous foramen, reliefs or joints. It is especially true for the sphenoid bone whom central location hinged with most of skull base components is unique. Recently, technological progress has led to develop new pedagogical tools. This way, we bought a new real-time three-dimensional insight of the sphenoid bone that could be useful for the teacher, the student and the surgeon. High-definition photography was taken all around an isolated dry skull base bone prepared with Beauchêne's technique. Pictures were then computed to provide an overview with rotation and magnification on demand. From anterior, posterior, lateral or oblique views and from in out looks, anatomical landmarks and subtleties were described step by step. Thus, the sella turcica, the optic canal, the superior orbital fissure, the sphenoid sinus, the vidian canal, pterygoid plates and all foramen were clearly placed relative to the others at each face of the sphenoid bone. In addition to be the first report of the 360 Photography tool, perspectives are promising as the development of a real-time interactive tridimensional space featuring the sphenoid bone. It allows to turn around the sphenoid bone and to better understand its own special shape, numerous foramen, neurovascular contents and anatomical relationships. This new technological tool may further apply for surgical planning and mostly for strengthening a basic anatomical knowledge firstly introduced.

  9. Pressure measurement in the cervical spinal facet joint: considerations for maintaining joint anatomy and an intact capsule.

    Science.gov (United States)

    Jaumard, Nicolas V; Bauman, Joel A; Welch, William C; Winkelstein, Beth A

    2011-07-01

    A novel noninvasive approach to measure facet joint pressure in the cervical spine was investigated using a tip-mounted transducer that can be inserted through a hole in the bony lateral mass. This technique is advantageous because it does not require resection of the joint capsule, but there are potential issues regarding its applicability that are addressed. The objective was to evaluate the effect of a tip-mounted pressure probe's position and orientation on contact pressure measurements in biomechanical experiments. Measurements of direct contact pressure in the facet joint of cadaveric spines have been obtained via pressure-sensitive films. However, that method requires the resection of the facet capsule, which can alter the overall joint's mechanical behavior and can affect the measured contact pressures. Influence of position and orientation on probe measurements was evaluated in companion surrogate and cadaveric investigations. The probe was placed in the facet of an anatomic vertebral C4/5 surrogate undergoing sagittal bending moments. Pressure-sensitive paper was used to map contact regions in the joint of the surrogate and cadaveric cervical segments (n = 3) during extension. The probe also underwent uniaxial compression in cadaveric facets to evaluate the effect of orientation relative to the contact surface on the probe signal. Although experimental and theoretical pressure profiles followed the same trends, measured maximum pressures were half of the theoretical ones. In the orientation study, maximum pressures were not different for probe orientations of 0° and 5°, but no signal was recorded at orientations greater than 15°. This approach to measure pressure was selected to provide a minimally-invasive method to quantify facet joint pressures during clinically relevant applications. Both the position and orientation of the probe are critical factors in monitoring local pressure profiles in this mobile synovial joint.

  10. Jay's Collectibles

    Science.gov (United States)

    Cappel, James J.; Gillman, Jason R., Jr.

    2011-01-01

    There is growing interest in collectibles of many types, as indicated by the popularity of television programs such as the History Channel's "Pawn Stars" and "American Pickers" and the Public Broadcasting Service's "Antiques Road Show." The availability of online auction sites such as eBay has enabled many people to collect items of interest as a…

  11. A modeling approach to compute modification of net joint forces caused by coping movements in obstetric brachial plexus palsy

    Science.gov (United States)

    2013-01-01

    Background Many disorders of the musculoskeletal system are caused by modified net joint forces resulting from individual coping movement strategies of patients suffering from neuromuscular diseases. Purpose of this work is to introduce a personalized biomechanical model which allows the calculation of individual net joint forces via inverse dynamics based on anthropometry and kinematics of the upper extremity measured by 3D optoelectronical motion analysis. Methods The determined resulting net joint forces in the anatomical axis of movement may be used to explain the reason for possible malfunction of the musculoskeletal system, especially joint malformation. For example the resulting net joint forces in the humerothoracic joint from simulations are compared to a sample of children presenting obstetric brachial plexus palsy showing an internal shoulder rotation position and a sample of healthy children. Results The results presented from the simulation show that an increased internal shoulder rotation position leads to increased net joint forces in the humerothoracic joint. A similar behavior is presented for the subjects suffering from brachial plexus palsy with an internal shoulder rotation position. Conclusions The increased net joint forces are a possible reason for joint malformation in the humerothoracic joint caused by coping movements resulting from neuromuscular dysfunction as stated in literature. PMID:24139445

  12. A unified deformable (UD) segment model for quantifying total power of anatomical and prosthetic below-knee structures during stance in gait.

    Science.gov (United States)

    Takahashi, Kota Z; Kepple, Thomas M; Stanhope, Steven J

    2012-10-11

    Anatomically-relevant (AR) biomechanical models are traditionally used to quantify joint powers and segmental energies of lower extremity structures during gait. While AR models contain a series of rigid body segments linked together via mechanical joints, prosthetic below-knee structures are often deformable objects without a definable ankle joint. Consequently, the application of AR models for the study of prosthetic limbs has been problematic. The purpose of this study was to develop and validate a unified deformable (UD) segment model for quantifying the total power of below-knee structures. Estimates of total below-knee power derived via the UD segment model were compared to those derived via an AR model during stance in gait of eleven healthy subjects. The UD segment model achieved similar results to the AR model. Differences in peak power, total positive work, and total negative work were 1.91±0.31%, 3.97±0.49%, and 1.39±0.33%, relative to the AR model estimates. The main advantage of the UD segment model is that it does not require the definition of an ankle joint or foot structures. Therefore, this technique may be valuable for facilitating direct comparisons between anatomical and disparate prosthetic below-knee structures in future studies.

  13. MRI anatomical mapping and direct stereotactic targeting in the subthalamic region: functional and anatomical correspondence in Parkinson's disease

    Energy Technology Data Exchange (ETDEWEB)

    Lemaire, Jean-Jacques; Coste, Jerome [CHU Clermont-Ferrand, Hopital Gabriel Montpied, Service de Neurochirurgie A, Clermont-Ferrand (France); Inserm, ERI 14, Clermont-Ferrand (France); Ouchchane, Lemlih [Univ Clermont 1, UFR Medecine, Unite de Bio statistiques, telematique et traitement d' image, Clermont-Ferrand (France); Inserm, ERI 14, Clermont-Ferrand (France); Hemm, Simone [Inserm, ERI 14, Clermont-Ferrand (France); Derost, Philippe; Ulla, Miguel; Durif, Franck [CHU Clermont-Ferrand, Hopital Gabriel Montpied, Service de Neurologie A, Clermont-Ferrand (France); Siadoux, Severine [CHU Clermont-Ferrand, Hopital Gabriel Montpied, Service de Radiologie A, Clermont-Ferrand (France); Gabrillargues, Jean [CHU Clermont-Ferrand, Hopital Gabriel Montpied, Service de Radiologie A, Clermont-Ferrand (France); Inserm, ERI 14, Clermont-Ferrand (France); Chazal, Jean [CHU Clermont-Ferrand, Hopital Gabriel Montpied, Service de Neurochirurgie A, Clermont-Ferrand (France)

    2007-08-15

    Object Relationships between clinical effects, anatomy, and electrophysiology are not fully understood in DBS of the subthalamic region in Parkinson's disease. We proposed an anatomic study based on direct image-guided stereotactic surgery with a multiple source data analysis. Materials and Methods A manual anatomic mapping was realized on coronal 1.5-Tesla MRI of 15 patients. Biological data were collected under local anesthesia: the spontaneous neuron activities and the clinical efficiency and the appearance of adverse effects. They were related to relevant current values (mA), the benefit threshold (bt, minimal current leading an clear efficiency), the adverse effect threshold (at, minimal current leading an adverse effect) and the stimulation margin (sm = at - bt); they were matched with anatomy. Results We found consistent relationships between anatomy and biological data. The optimal stimulation parameters (low bt + high sm) were noted in the dorsolateral STN. The highest spontaneous neuron activity was found in the ventromedial STN. Dorsolateral (sensorimotor) STN seems the main DBS effector. The highest spontaneous neuron activity seems related to the anterior (rostral) ventromedial (limbic) STN. Conclusion 1.5 Tesla images provide sufficiently detailed subthalamic anatomy for image-guided stereotactic surgery and may aid in understanding DBS mechanisms. (orig.)

  14. Joint Custody and Coparenting.

    Science.gov (United States)

    Sell, Kenneth D.

    Results are presented of an intensive search of U.S. newspapers and periodicals on the joint custody of children after divorce, where both parents have continued responsibility for parenting and where the children spend part of each week, month, or year with both of the parents. Areas of concern addressed by these materials include the following:…

  15. Keyed shear joints

    DEFF Research Database (Denmark)

    Hansen, Klaus

    This report gives a summary of the present information on the behaviour of vertical keyed shear joints in large panel structures. An attemp is made to outline the implications which this information might have on the analysis and design of a complete wall. The publications also gives a short...

  16. Jointness, A Selected Bibliography.

    Science.gov (United States)

    1997-02-01

    The Services’ Judge Advocates and Lawyers Move Toward the Next Century. Study Project. Car- lisle Barracks: US Army War College, 5 April 1993. 57pp...Shaping America’s Future Mili- tary." Parameters 24 (Winter 1994-1995): 19-29. Barlow, Jason B. "Interservice Rivalry in the Pacific." Joint Force

  17. Joint Rescue Drill

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Ships gather for a joint rescue drill at the Waigaoqiao Dock in Shanghai on August 24.A large-scale rescue drill, combining maritime and air forces,was held as part of the ongoing World Maritime Rescue Conference 2011 in the city.During the drill,

  18. Jointness: A Selected Bibliography

    Science.gov (United States)

    2010-12-01

    Leavenworth: U.S. Army Combined Arms Center, Combat Studies Institute, 2008. 428pp. (UA25 .C55 2008) http://www.cgsc.edu/ carl /download/csipubs...SMARTbook: Guide to Joint, Multinational & Interagency Operations. 2nd ed., rev. Lakeland, FL: Lightning Press, 2009. 302pp. (U260 .W33 2009) Whittaker

  19. Generation of infant anatomical models for evaluating electromagnetic field exposures.

    Science.gov (United States)

    Li, Congsheng; Chen, Zhiye; Yang, Lei; Lv, Bin; Liu, Jianzhe; Varsier, Nadège; Hadjem, Abdelhamid; Wiart, Joe; Xie, Yi; Ma, Lin; Wu, Tongning

    2015-01-01

    Realistic anatomical modeling is essential in analyzing human exposure to electromagnetic fields. Infants have significant physical and anatomical differences compared with other age groups. However, few realistic infant models are available. In this work, we developed one 12-month-old male whole body model and one 17-month-old male head model from magnetic resonance images. The whole body and head models contained 28 and 30 tissues, respectively, at spatial resolution of 1 mm × 1 mm × 1 mm. Fewer identified tissues in the whole body model were a result of the low original image quality induced by the fast imaging sequence. The anatomical and physical parameters of the models were validated against findings in published literature (e.g., a maximum deviation as 18% in tissue mass was observed compared with the data from International Commission on Radiological Protection). Several typical exposure scenarios were realized for numerical simulation. Dosimetric comparison with various adult and child anatomical models was conducted. Significant differences in the physical and anatomical features between adult and child models demonstrated the importance of creating realistic infant models. Current safety guidelines for infant exposure to radiofrequency electromagnetic fields may not be conservative.

  20. [Anatomical names of foramina and canales in skeleton].

    Science.gov (United States)

    Shikano, S; Yamashita, Y

    1998-03-01

    Latin anatomical names of Foramina and Canales in skeleton were analyzed and compared with Japanese anatomical names for better understanding of the structures of the human body and for possible revision in the future. The conclusions were as follows: 1. In general, short tunnels were called Foramina (singular: Foramen), and long tunnels Canales (singular: Canalis). 2. One end of Canalis was sometimes called Foramen. In this case, Canalis and Foramen were usually modified by the same words. 3. Each name of Foramina contained the word which means form, state, absolute size, region of existence, one of the contents or function of Foramina. 4. Each name of Canales contained the word which means region of existence, one of the contents or function of Canales. 5. Some names of Foramina and Canales that were supposed to mean the region of existence meant one of the contents of the structures. 6. As for Latin anatomical names, the relation between words were relatively clear by the proper use of noun, adjective, nominative, and genitive. 7. Since different Chinese characters were sometimes pronounced similarly in Japanese anatomical names, different structures might be confused. 8. It seemed that some Japanese anatomical names needed partial correction.

  1. Accuracy of distal radius positioning using an anatomical plate.

    Science.gov (United States)

    Vroemen, Joy C; Dobbe, Johannes G G; Sierevelt, Inger N; Strackee, Simon D; Streekstra, Geert J

    2013-04-01

    Over the past decade, several anatomical plates have been introduced to improve the result of open reduction and internal fixation of the distal radius. Using 3-dimensional imaging techniques, the authors studied the accuracy and reproducibility of distal radius positioning using anatomical plates.Distal radius fractures and the correction of these fractures were simulated with plastic bone models of radii. The authors simulated a defect by removing an arbitrary wedge shape from the artificial radii. Two surgeons corrected these fractures by placing 2 anatomical plate types according to the plate manufacturers' instructions. The residual positioning errors of the distal segment in relation to the unaffected radii were determined using 3-dimensional imaging and were compared with naturally occurring bilateral radius differences in healthy individuals. In many cases, positioning does not agree with differences based on bilateral asymmetry in healthy patients.This study indicated the accuracy of anatomical plates. Positioning an anatomical plate may lead to considerable residual errors in individual patients. Volar distal radius plate shapes differ among plate manufacturers. Therefore, one plate may perform better than another in an individual.

  2. CT following US for possible appendicitis: anatomic coverage

    Energy Technology Data Exchange (ETDEWEB)

    O' Malley, Martin E. [University of Toronto, Princess Margaret Hospital, 3-920, Joint Department of Medical Imaging, Toronto, Ontario (Canada); Alharbi, Fawaz [University of Toronto, Toronto General Hospital, NCSB 1C572, Joint Department of Medical Imaging, Toronto, Ontario (Canada); Qassim University, Department of Medical Imaging, Buraydah, Qassim (Saudi Arabia); Chawla, Tanya P. [University of Toronto, Mount Sinai Hospital, Room 567, Joint Department of Medical Imaging, Toronto, Ontario (Canada); Moshonov, Hadas [University of Toronto, Joint Department of Medical Imaging, Toronto, Ontario (Canada)

    2016-02-15

    To determine superior-inferior anatomic borders for CT following inconclusive/nondiagnostic US for possible appendicitis. Ninety-nine patients with possible appendicitis and inconclusive/nondiagnostic US followed by CT were included in this retrospective study. Two radiologists reviewed CT images and determined superior-inferior anatomic borders required to diagnose or exclude appendicitis and diagnose alternative causes. This ''targeted'' coverage was used to estimate potential reduction in anatomic coverage compared to standard abdominal/pelvic CT. The study group included 83 women and 16 men; mean age 32 (median, 29; range 18-73) years. Final diagnoses were: nonspecific abdominal pain 50/99 (51 %), appendicitis 26/99 (26 %), gynaecological 12/99 (12 %), gastrointestinal 9/99 (10 %), and musculoskeletal 2/99 (2 %). Median dose-length product for standard CT was 890.0 (range, 306.3 - 2493.9) mGy.cm. To confidently diagnose/exclude appendicitis or identify alternative diagnoses, maximum superior-inferior anatomic CT coverage was the superior border of L2-superior border of pubic symphysis, for both reviewers. Targeted CT would reduce anatomic coverage by 30-55 % (mean 39 %, median 40 %) compared to standard CT. When CT is performed for appendicitis following inconclusive/nondiagnostic US, targeted CT from the superior border of L2-superior border of pubic symphysis can be used resulting in significant reduction in exposure to ionizing radiation compared to standard CT. (orig.)

  3. Aesthesis in anatomy. Materiality and elegance in the Eighteenth-Century Leiden Anatomical Collections

    NARCIS (Netherlands)

    Hendriksen, Marieke Maria Anna

    2012-01-01

    A life-like human arm decorated with lace sleeves, holding an eyelid on a string, fragments of skin swivelling in a phial with a twig, a shiny silvery liver, a dog with a cleft palate, a human ear with a tiny pox mark, foetuses decorated with colourful beads. At first sight, it seems an odd collecti

  4. Epilepsia partialis continua present with shoulder joint-trunk-hip joint rhythmic clonic seizure: a case report

    Directory of Open Access Journals (Sweden)

    Lv YD

    2016-09-01

    Full Text Available Yudan Lv, Zan Wang, Fengna Chu, Chang Liu, Hongmei Meng Department of Neurology and Neuroscience Center, The First Hospital of Jilin University, ChangChun, People’s Republic of China Abstract: Epilepsia partialis continua (EPC is a particular type of epilepsy which is distinguished from “common epilepsy” by its characteristic semiological features. However, unusual manifestations should be described in order to give awareness at clinical diagnosis. In this case report we describe a rare EPC case not previously reported, in which left shoulder joint-trunk-hip joint jerk was present for 1 week. Abnormal electroencephalogram and cerebrospinal fluid results supported a diagnosis of viral encephalitis. Antiepileptic treatment seemed effective. Our report emphasizes that a detailed functional anatomical analysis and synchronized electroencephalogram discharge should be done to avoid misdiagnosis in patients with synchronic shoulder-trunk-hip jerk symptoms. Keywords: EPC, shoulder-trunk-hip, EEG, clonic seizure, virus encephalitis

  5. Cardiac mouse lymphatics: developmental and anatomical update.

    Science.gov (United States)

    Flaht-Zabost, Aleksandra; Gula, Grzegorz; Ciszek, Bogdan; Czarnowska, Elżbieta; Jankowska-Steifer, Ewa; Madej, Maria; Niderla-Bielińska, Justyna; Radomska-Leśniewska, Dorota; Ratajska, Anna

    2014-06-01

    The adult mouse heart possesses an extensive lymphatic plexus draining predominantly the subepicardium and the outer layer of the myocardial wall. However, the development of this plexus has not been entirely explored, partially because of the lack of suitable methods for its visualization as well as prolonged lymphatic vessel formation that starts prenatally and proceeds during postnatal stages. Also, neither the course nor location of collecting vessels draining lymph from the mouse heart have been precisely characterized. In this article, we report that murine cardiac lymphatic plexus development that is limited prenatally only to the subepicardial area, postnatally proceeds from the subepicardium toward the myocardial wall with the base-to-apex gradient; this plexus eventually reaches the outer half of the myocardium with a predominant location around branches of coronary arteries and veins. Based on multiple marker immunostaining, the molecular marker-phenotype of cardiac lymphatic endothelial cells can be characterized as: Prox-1(+), Lyve-1(+), VEGFR3(+), Podoplanin(+), VEGFR2(+), CD144(+), Tie2(+), CD31(+), vWF(-), CD34(-), CD133(-). There are two major collecting vessels: one draining the right and left ventricles along the left conal vein and running upwards to the left side of the pulmonary trunk and further to the nearest lymph nodes (under the aortic arch and near the trachea), and the other one with its major branch running along the left cardiac vein and further on the surface of the coronary sinus and the left atrium to paratracheal lymph nodes. The extracardiac collectors gain the smooth muscle cell layer during late postnatal stages.

  6. [Imaging of the elbow joint with focused MRI. Part 1: examination techniques and sequences for bone and ligaments].

    Science.gov (United States)

    Rehm, J; Zeifang, F; Weber, M-A

    2014-02-01

    Imaging of the elbow joint places high demands on the quality of imaging due to the challenging anatomy and the sometimes subtle findings. For the diagnosis of periarticular soft tissues, ligamentous structures and in individual cases for fracture and tumor diagnosis, magnetic resonance imaging (MRI) is mostly groundbreaking and allows a reliable diagnosis in most cases. This review article discusses the complex imaging anatomy and anatomical variants of this joint and the most common osseous and ligamentous injuries of the elbow joint are presented. The typical MRI findings and indications are illustrated and discussed and possible pitfalls are pointed out. The various examination techniques and MRI sequences are also addressed.

  7. Arthroscopic Management of Pigmented Villonodular Synovitis of the Knee Joint.

    Science.gov (United States)

    Dwidmuthe, Samir; Barick, Devashis; Rathi, Tarun

    2015-01-01

    Pigmented Villonodular Synovitis (PVNS) of knee joint is a rare disorder of Synovium. Hip and knee joint are commonly affected joints. The knee PVNS presents as a localized or diffuse form. Diagnosis if often delayed and permanent joint damage occurs with advanced disease. Ultrasound examination shows fluid collection and synovial hypertrophy. Magnetic resonance imaging helps in clinching the diagnosis. Final confirmation of PVNS is done with histopathological examination of synovial tissue removed. Post operative radiation has shown to reduce the rate of recurrent disease. 25 years male presented to us with painless swelling of left knee joint of 3 months duration. Radiographs were normal. MRI showed synovial hypertrophy with changes suggestive of PVNS. We did arthroscopic six portal synovectomy. The patient regained his function and was asymptomatic at 2 year follow up. We want to emphasize that early diagnosis and well done arthroscopic Synovectomy gives good clinical outcome with low recurrence rate. Radiotherapy should be reserved for recurrent disease.

  8. Anatomical study of the coracoid process in Mongolian male cadavers using the Latarjet procedure.

    Science.gov (United States)

    Lian, Jianqiang; Dong, Lele; Zhao, Yanjun; Sun, Jinlei; Zhang, Wenlong; Gao, Chunzheng

    2016-10-24

    The Latarjet procedure addresses recurrent anterior shoulder instability in the context of a significant bony defect. However, the bony and soft tissue anatomy of the coracoid in coracoid transfer procedures has not yet been defined in Mongolian men. The aims of this study were to describe the soft tissue attachments of the coracoid regarding the bony anatomy, define the average amount of bone available for coracoid transfer, analyze the characteristics of the pectoralis minor and coracoid, and study the relationship between the bony dimensions of the coracoid and body length in Mongolian men. We dissected 30 shoulders from 15 male Mongolian cadavers, exposing the coracoid process and attached anatomical structures including the lateral clavicle and acromion, then measured the bony dimensions of the coracoid and the locations and sizes of the coracoid soft tissue footprints. The mean length of the coracoid available for transfer was 23.93 ± 2.32 mm. The mean length of the coracoid was 42.10 ± 2.3 mm, and the mean width and height of the coracoid midpoint were 15.29 ± 1.70 mm and 11.61 ± 1.98 mm, respectively. The pectoralis minor was part of the joint capsule and passed over the coracoid in some samples. The mutation rate of the pectoralis minor footprint, which was asymmetrical and irregular, was 23.33 %. Statistical analysis involved a multiple linear regression equation. The average amount of bone available for use in coracoid transfer in Mongolian men was less than that of other populations. Mutation of the pectoralis minor may induce intraoperative capsule injury because this muscle passes over the coracoid deep to the joint capsule of the glenohumeral joint and constitutes part of the shoulder joint, strengthening the joint. Statistically, higher coracoids appeared in shorter patients and longer coracoids appeared in taller patients. Surgically, great care should be taken to consider a patient's height to precisely implement the

  9. simulating Collective agency: Joint purpose, presence and power as ...

    African Journals Online (AJOL)

    and peri-urban communities of Willowvale and Lesseyton in the Eastern Cape, South ... rhetoric of its participatory aims and acknowledge the complexity, flexibility and ..... Journal of Environmental Planning and Management, 51(5), 701–716.

  10. Culture collections.

    Science.gov (United States)

    Smith, David

    2012-01-01

    Culture collections no matter their size, form, or institutional objectives play a role in underpinning microbiology, supplying the resources for study, innovation, and discovery. Their basic roles include providing a mechanism for ex situ conservation of organisms; they are repositories for strains subject to publication, taking in safe, confidential, and patent deposits from researchers. They supply strains for use; therefore, the microorganisms provided must be authentic and preserved well, and any associated information must be valid and sufficient to facilitate the confirmation of their identity and to facilitate their use. The organisms must be collected in compliance with international conventions, international and national legislation and distributed to users indicating clearly the terms and conditions under which they are received and can be used. Collections are harmonizing approaches and characterizing strains to meet user needs. No one single collection can carry out this task alone, and therefore, it is important that output and strategy are coordinated to ensure culture collections deliver the basic resources and services microbiological innovation requires. This chapter describes the types of collection and how they can implement quality management systems and operate to deliver their basic functions. The links to information sources given not only provide support for the practitioners within collections but also provide guidance to users on accessing the huge resource available and how they can help ensure microbiology has the resources and a solid platform for future development.

  11. Steroid injections - tendon, bursa, joint

    Science.gov (United States)

    ... medlineplus.gov/ency/article/007678.htm Steroid injections - tendon, bursa, joint To use the sharing features on ... painful. It can be injected into a joint, tendon, or bursa. Description Your health care provider inserts ...

  12. Orbitofrontal sulcal and gyrus pattern in human: an anatomical study

    Directory of Open Access Journals (Sweden)

    Thiago Pereira Rodrigues

    2015-05-01

    Full Text Available The anatomical characterization of the orbitofrontal cortex in human is limited in literature instead of many functional and clinical studies involving it. Objective Anatomically define the orbitofrontal region aiming to possible neurosurgical treatments and unify the scientific nomenclature as well. Method We analyze eighty four human hemispheres using a surgical microscope. Then we chose four hemispheres and dissect them according to Klinger’ technique. Results We found five main sulcus: olfatory sulcus, orbital medial sulcus, orbital lateral sulcus, orbital transverse sulcus and orbital intermediate sulcus. These sulcus, excluding the intermediate sulcus, delimit five gyrus: rectus gurys, orbital medial gyrus, orbital anterior gyrus, orbital lateral gyrus and orbital posterior gyrus. The main sulcal configuration can be divided on four more frequently patterns. Conclusion Orbitofrontal cortex is associated with many psychiatric disorders. Better anatomical and functional characterization of the orbitofrontal cortex and its connections will improve our knowledge about these diseases.

  13. Photosynthesis rate in moss leaves of various anatomical structure

    Directory of Open Access Journals (Sweden)

    Jan Krupa

    2015-05-01

    Full Text Available On the basis of measurements of the rate of gas exchange in the leaves of mosses the value of the compensation and of the light saturation of photosynthesis points was determined. These points differentiate mosses into photo- and sciophilous ones.Moss species such as: Mnium punctatum, Catherinea undulata, Polytrichum juniperinum, Funaria hygrometrica, Polytrichum piliferum, Aloina rigida were also classified according to differences in the anatomical structure of their leaves. The morphological characters of the anatomical structure of leaves and their chlorophyll content are connected with photosynthetic activity. There is a correlation between the leaf surface and the degree of differentiation of the anatomical structure. This results in an enlargement of the contact surface of the cells assimilating from the air, and this in turn is associated with an increase in the photosynthetic activity per leaf surface area unit.

  14. Gastric Anatomic Type Is Associated with Obesity and Gender

    Directory of Open Access Journals (Sweden)

    Yu Jen Wang

    2016-06-01

    Full Text Available Objective: To enhance our understanding of the associations among gastric anatomy, obesity, and gender. Methods: 777 randomly selected participants received health checkups, including a series of radiographs of the upper gastrointestinal tract (UGI; the findings were linked with each corresponding subject's gender and BMI. We measured the length, angle, and different portions of the stomach with the subjects in the standing position using radiographs to classify all individuals into anatomic types 1 through 6 based on gastric morphology. The gastric morphology was identified based on the initial UGI examination: 166 follow-up UGI radiographs at 12 ± 1.5 months to evaluate whether the stability of gastric anatomy persisted over time. Results: There was a significant difference in anatomic types between females and males (p Conclusion: Gastric anatomic types were associated with obesity and gender.

  15. In vivo measurement of fascicle length and pennation of the human anconeus muscle at several elbow joint angles.

    Science.gov (United States)

    Stevens, Daniel E; Smith, Cameron B; Harwood, Brad; Rice, Charles L

    2014-11-01

    Ultrasound imaging has facilitated the reliable measure of the architectural variables fascicle length (LF ) and pennation angle (PA), at rest and during static and dynamic contractions in many human skeletal muscles in vivo. Despite its small size and very modest contribution to elbow extension torque, the anconeus muscle has proven a useful model for the study of neuromuscular function in health and disease. Recent single motor unit (MU) studies in the anconeus have reported discrete and identifiable individual trains of MU potentials from intramuscular electromyography (EMG) recordings during dynamic elbow extensions. It is unknown whether the anconeus has unique architectural features related to alterations in LF and PA throughout the elbow joint range of motion that may help explain these high-quality recordings. Previous anatomical studies have investigated this muscle in cadavers and at mainly one elbow joint angle. The purpose of this study was to measure in vivo PA and LF of the anconeus muscle in a relaxed state at different degrees of elbow flexion using ultrasonography. Ultrasound images were collected from 10 healthy males (25 ± 3 years) at 135°, 120°, 90°, 45°, and 0° of elbow flexion. Average values of LF decreased by 6 mm (10%), 6 mm (12%), and 4 mm (9%) from 135-120°, 120-90°, and 90-45° of elbow flexion, respectively, whereas average PA values increased by 1° (9%), 1° (8%), and 2° (14%) from 135-120°, 120-90°, and 45-0°, respectively. The results indicate that anconeus muscle architecture is dynamic, undergoing moderate changes with elbow joint excursion that are similar to other limb muscles reported elsewhere. The data obtained here are more comprehensive and representative of architectural changes at various elbow joint positions than those data reported in cadaveric studies. Furthermore, the results of this study indicate that despite experiencing similar relative changes in muscle architecture to other skeletal muscles

  16. In vivo measurement of fascicle length and pennation of the human anconeus muscle at several elbow joint angles

    Science.gov (United States)

    Stevens, Daniel E; Smith, Cameron B; Harwood, Brad; Rice, Charles L

    2014-01-01

    Ultrasound imaging has facilitated the reliable measure of the architectural variables fascicle length (LF) and pennation angle (PA), at rest and during static and dynamic contractions in many human skeletal muscles in vivo. Despite its small size and very modest contribution to elbow extension torque, the anconeus muscle has proven a useful model for the study of neuromuscular function in health and disease. Recent single motor unit (MU) studies in the anconeus have reported discrete and identifiable individual trains of MU potentials from intramuscular electromyography (EMG) recordings during dynamic elbow extensions. It is unknown whether the anconeus has unique architectural features related to alterations in LF and PA throughout the elbow joint range of motion that may help explain these high-quality recordings. Previous anatomical studies have investigated this muscle in cadavers and at mainly one elbow joint angle. The purpose of this study was to measure in vivo PA and LF of the anconeus muscle in a relaxed state at different degrees of elbow flexion using ultrasonography. Ultrasound images were collected from 10 healthy males (25 ± 3 years) at 135°, 120°, 90°, 45°, and 0° of elbow flexion. Average values of LF decreased by 6 mm (10%), 6 mm (12%), and 4 mm (9%) from 135–120°, 120–90°, and 90–45° of elbow flexion, respectively, whereas average PA values increased by 1° (9%), 1° (8%), and 2° (14%) from 135–120°, 120–90°, and 45–0°, respectively. The results indicate that anconeus muscle architecture is dynamic, undergoing moderate changes with elbow joint excursion that are similar to other limb muscles reported elsewhere. The data obtained here are more comprehensive and representative of architectural changes at various elbow joint positions than those data reported in cadaveric studies. Furthermore, the results of this study indicate that despite experiencing similar relative changes in muscle architecture to other skeletal

  17. Computed Tomography and Magnetic Resonance Imaging Features of the Temporomandibular Joint in Two Normal Camels

    Directory of Open Access Journals (Sweden)

    Alberto Arencibia

    2012-01-01

    Full Text Available Computed tomography (CT and magnetic resonance (MR image features of the temporomandibular joint (TMJ and associated structures in two mature dromedary camels were obtained with a third-generation equipment CT and a superconducting magnet RM at 1.5 Tesla. Images were acquired in sagittal and transverse planes. Medical imaging processing with imaging software was applied to obtain postprocessing CT and MR images. Relevant anatomic structures were identified and labelled. The resulting images provided excellent anatomic detail of the TMJ and associated structures. Annotated CT and MR images from this study are intended as an anatomical reference useful in the interpretation for clinical CT and MR imaging studies of the TMJ of the dromedary camels.

  18. Do the urolithiasis scoring systems predict the success of percutaneous nephrolithotomy in cases with anatomical abnormalities?

    Science.gov (United States)

    Kocaaslan, Ramazan; Tepeler, Abdulkadir; Buldu, Ibrahim; Tosun, Muhammed; Utangac, Mehmet Mazhar; Karakan, Tolga; Ozyuvali, Ekrem; Hatipoglu, Namik Kemal; Unsal, Ali; Sarica, Kemal

    2016-07-12

    The objective of this study is to assess the utility of the Guy, S.T.O.N.E., and CROES nephrolithometry scoring systems (SS), and compare the capability of each system to predict percutaneous nephrolithotomy (PNL) outcome in patients with anatomical abnormalities. We retrospectively collected medical records of patients with anatomical abnormalities who underwent PNL for the treatment of renal calculi by experienced surgical teams in four referral centers. All of the patients were graded by a single observer from each department based on preoperative computed tomography images using each SS. Patient demographics and outcomes were compared according to the complexity of the procedure as graded by each scoring system. A total of 137 cases with anatomical abnormalities [horseshoe kidney (n = 46), malrotation (n = 33), kypho and/or scoliosis (n = 31) and ectopic kidney (n = 27)] were assessed retrospectively. The mean stone burden, number, and density were 708.5 mm(2), 1.7, and 791.8 HU, respectively. The mean procedure, fluoroscopy, and hospitalization times were 75.2 ± 35.3 min, 133.4 ± 92.3 s, and 3.5 ± 2.1 days, respectively. Stone-free status was achieved in 106 cases (77.4 %). A total of 17 (13.6 %) complications occurred postoperatively. The mean scores were 2.7, 7.2, and 219.1, for the Guy, S.T.O.N.E., and CROES systems, respectively. CROES score was the independent predictor of PNL success in cases with anatomical abnormalities [p: 0.001, OR 1.01, (95 % CI 1005-1021)]. The CROES scoring system is well correlated with the success of PNL in cases with anatomical abnormalities; the S.T.O.N.E. and Guy scoring systems failed to predict the outcomes of PNL in this specific patient population.

  19. A musculoskeletal lumbar and thoracic model for calculation of joint kinetics in the spine

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yong Cheol; Ta, Duc manh; Koo, Seung Bum [Chung-Ang University, Seoul (Korea, Republic of); Jung Moon Ki [AnyBody Technology A/S, Aalborg (Denmark)

    2016-06-15

    The objective of this study was to develop a musculoskeletal spine model that allows relative movements in the thoracic spine for calculation of intra-discal forces in the lumbar and thoracic spine. The thoracic part of the spine model was composed of vertebrae and ribs connected with mechanical joints similar to anatomical joints. Three different muscle groups around the thoracic spine were inserted, along with eight muscle groups around the lumbar spine in the original model from AnyBody. The model was tested using joint kinematics data obtained from two normal subjects during spine flexion and extension, axial rotation and lateral bending motions beginning from a standing posture. Intra-discal forces between spine segments were calculated in a musculoskeletal simulation. The force at the L4-L5 joint was chosen to validate the model's prediction against the lumbar model in the original AnyBody model, which was previously validated against clinical data.

  20. Sacroiliac joint dysfunction as a reason for the development of acetabular retroversion: a new theory.

    Science.gov (United States)

    Cibulka, Michael T

    2014-05-01

    Acetabular retroversion has been recently implicated as an important factor in the development of femoral acetabular impingement and hip osteoarthritis. The proper function of the hip joint requires that the anatomic features of the acetabulum and femoral head complement one another. In acetabular retroversion, the alignment of the acetabulum is altered where it opens in a posterolaterally instead of anterior direction. Changes in acetabular orientation can occur with alterations in pelvic tilt (anterior/posterior), and pelvic rotation (left/right). An overlooked problem that alters pelvic tilt and rotation, often seen by physical therapists, is sacroiliac joint dysfunction. A unique feature that develops in patients with sacroiliac joint dysfunction (SIJD) is asymmetry between the left and right innominate bones that can alter pelvic tilt and rotation. This article puts forth a theory suggesting that acetabular retroversion may be produced by sacroiliac joint dysfunction.

  1. MRI Slice Segmentation and 3D Modelling of Temporomandibular Joint Measured by Microscopic Coil

    Science.gov (United States)

    Smirg, O.; Liberda, O.; Smekal, Z.; Sprlakova-Pukova, A.

    2012-01-01

    The paper focuses on the segmentation of magnetic resonance imaging (MRI) slices and 3D modelling of the temporomandibular joint disc in order to help physicians diagnose patients with dysfunction of the temporomandibular joint (TMJ). The TMJ is one of the most complex joints in the human body. The most common joint dysfunction is due to the disc. The disc is a soft tissue, which in principle cannot be diagnosed by the CT method. Therefore, a 3D model is made from the MRI slices, which can image soft tissues. For the segmentation of the disc in individual slices a new method is developed based on spatial distribution and anatomical TMJ structure with automatic thresholding. The thresholding is controlled by a genetic algorithm. The 3D model is realized using the marching cube method.

  2. Benign anatomical mistakes: the correct anatomical term for the recurrent laryngeal nerve.

    Science.gov (United States)

    Mirilas, Petros; Skandalakis, John E

    2002-01-01

    The term recurrent laryngeal nerve has been adopted by Nomina Anatomica (1989) and Terminologia Anatomica (1998) to describe this vagus branch from its origin, its turn dorsally around the subclavian artery and the aortic arch, and its cranial pathway until it reaches its terminal organs in the neck. However, there is still much confusion, and either the terms inferior and recurrent laryngeal nerve are used interchangeably or inferior laryngeal nerve is considered the terminal branch of the recurrent laryngeal nerve. We hereby feel that it is necessary to reassess the term and we propose the term inferior laryngeal nerve for the entire nerve under consideration, from its origin from the vagus nerve to its destinations, including tracheal, esophageal, and pharyngeal branches. If the term superior laryngeal nerve is a given, standard and accepted term in the anatomical terminology, then logically the term inferior laryngeal nerve should also be accepted, as opposed to it. Of course the upward travel of the inferior laryngeal nerve is "recurrent". When nonrecurrence is encountered together with an arteria lusoria, a retroesophageal right subclavian artery or a right aortic arch, we consider that the term nonrecurrent inferior laryngeal nerve should be used to describe the deviation from the normal.

  3. Biomechanical Aspects of Shoulder and Hip Articulations: A Comparison of Two Ball and Socket Joints

    Directory of Open Access Journals (Sweden)

    Mustafa Qusay Ismael

    2006-01-01

    different for the two joints. Results obtained from the finite element analysis were important in understanding the areas of stress concentration and were thoroughly explained from the anatomical point of view and linked to muscle and joint capsule attachments. The model of the joints developed in this study can be used as a computational tool to joint biomechanics and to prosthetic implant analysis. Keywords: hip joint, shoulder joint, finite element analysis, biomechanics.

  4. [Videothoracoscopic anatomic pulmonary segmentary: an initial single-center experience].

    Science.gov (United States)

    Reis, João Eurico; Bravio, Ivan; Baptista, Pedro; Martelo, Fernando Palma

    2012-01-01

    The use of minimally invasive surgery for the treatment of lung cancer has been growing worldwide. Between May 2008 and November 2012, we performed 24 videothoracoscopic anatomical lung resections in our department. This includes 22 lobectomies and 2 anatomic segmentectomies, which is known to be a more complex surgery, since it demands a finer dissection of sub-lobar structures. We report the clinical cases of two patients who underwent anatomic segmentectomies. The first one was a 63 year old woman, smoker and with a history of breast cancer 20 years earlier. An incidental 9 mm node was found in the lingula. The patient underwent an anatomic lingulectomy and the frozen section was suggestive of a primary lung cancer. Therefore, we proceeded to a full lymphadenectomy. The final pathology evaluation showed a typical carcinoid tumour (pT1aN0). The second patient was a 50 year old woman, a smoker and with a heavy family history of lung cancer. In a screening CT scan a 8 mm ground glass opacity was identified in the left lower lobe (segment VI). After a VATS wedge resection of the node the frozen section evaluation was compatible with adenocarcinoma. We then proceeded to an anatomic segmentectomy with lymphadenectomy. The definitive pathology evaluation confirmed that it was a pT1a N0 bronchioloalveolar adenocarcinoma. The patients now have 5 and 2 months of follow up respectivelly and neither of them has signs of recurrence and the surgical incision showed a good aesthetic result. Anatomic segmentectomy is the indicated surgery especially in patients with low grade tumours, in early stage lung cancers or in patients without pulmonary function for a lobar resection, and it can be done safely using VATS.

  5. Precise Anatomic Localization of Accumulated Lipids in Mfp2 Deficient Murine Brains Through Automated Registration of SIMS Images to the Allen Brain Atlas

    Science.gov (United States)

    Škrášková, Karolina; Khmelinskii, Artem; Abdelmoula, Walid M.; De Munter, Stephanie; Baes, Myriam; McDonnell, Liam; Dijkstra, Jouke; Heeren, Ron M. A.

    2015-06-01

    Mass spectrometry imaging (MSI) is a powerful tool for the molecular characterization of specific tissue regions. Histochemical staining provides anatomic information complementary to MSI data. The combination of both modalities has been proven to be beneficial. However, direct comparison of histology based and mass spectrometry-based molecular images can become problematic because of potential tissue damages or changes caused by different sample preparation. Curated atlases such as the Allen Brain Atlas (ABA) offer a collection of highly detailed and standardized anatomic information. Direct comparison of MSI brain data to the ABA allows for conclusions to be drawn on precise anatomic localization of the molecular signal. Here we applied secondary ion mass spectrometry imaging at high spatial resolution to study brains of knock-out mouse models with impaired peroxisomal β-oxidation. Murine models were lacking D-multifunctional protein (MFP2), which is involved in degradation of very long chain fatty acids. SIMS imaging revealed deposits of fatty acids within distinct brain regions. Manual comparison of the MSI data with the histologic stains did not allow for an unequivocal anatomic identification of the fatty acids rich regions. We further employed an automated pipeline for co-registration of the SIMS data to the ABA. The registration enabled precise anatomic annotation of the brain structures with the revealed lipid deposits. The precise anatomic localization allowed for a deeper insight into the pathology of Mfp2 deficient mouse models.

  6. [APPLICATION OF COMPRESSION MINI-SCREWS IN TREATMENT OF PATIENTS WITH INJURY OF ELBOW JOINT BONES].

    Science.gov (United States)

    Neverov, V A; Egorov, K S

    2015-01-01

    A case report presents the experience of application of compression pileateless mini-screws (Gerbert's screws) in treatment of intra-articular fractures, which formed the elbow joint (44 cases). There were performed 32 operations concerning fracture of head of radius, 10 operations on the occasion of fractures of distal section of the humerus and 2 operations on the coronoid process. Long-term treatment results were followed-up in 31 patients during more than 6 months. On basis of analysis of treatment results the authors made a conclusion that the application of mini-screws in case of bone fractures, which formed the elbow joint, allowed realization of stable osteosynthesis after anatomic reposition of articular surfaces, obtaining good anatomical and functional result and shortened the terms of patient's treatment.

  7. Bilateral lingual-facial trunk: anatomic and clinical implications.

    Science.gov (United States)

    Troupis, T; Michalinos, A; Kakisis, J; Natsis, K; Sofidis, G; Skandalakis, P

    2015-01-01

    Common origin of lingual and facial artery is a relatively frequent anatomic varia-tion. Instead, bilateral lingual-facial trunk has been described only sparsely in the literature. In this report authors describe and analyse a case of bilateral common lingual-facial trunk in the context of its anatomical, clinical and embryological implications. We also describe possible consequences in performance of elective and emergent surgical operations and modification in surgical techniques that should be considered. We believe that surgeons should be suspicious for this variation's existence and keep alternative solutions in their armentarium.

  8. Anatomic Eponyms in Neuroradiology: Brain, Cerebral Vasculature, and Calvarium.

    Science.gov (United States)

    Bunch, Paul M; Zamani, Amir A

    2016-06-01

    Medical eponyms are ubiquitous, numerous, and at times controversial. They are often useful for succinctly conveying complex concepts, and familiarity with eponyms is important for proper usage and appropriate communication. In this historical review, we identify 18 anatomic eponyms used to describe structures of the brain, cerebral vasculature, and calvarium. For each structure, we first offer a biographical sketch of the individual for whom the structure is named. This is followed by a description of the anatomic structure and a brief discussion of its clinical relevance.

  9. Reply to “Introducing International Journal of Anatomical Variations”

    Directory of Open Access Journals (Sweden)

    Potu BK

    2009-07-01

    Full Text Available To the Editor, International Journal of Anatomical Variations:Please accept my heartiest congratulations on your recent opening of International Journal of Anatomical Variations Journal. I have already gone through the articles of first volume. It was surprised to read some of the unique variations published in it. Reading of these variations by vascular surgeons and angiologist will certainly boost their knowledge for better diagnosis and I hope you will continue publishing these types of rare variations. It would be great, if you encourage authors to submit research related articles. It is obvious that you have a wide-open future ahead of you.

  10. Dissimilarity-based classification of anatomical tree structures

    DEFF Research Database (Denmark)

    Sørensen, Lauge Emil Borch Laurs; Lo, Pechin Chien Pau; Dirksen, Asger

    2011-01-01

    A novel method for classification of abnormality in anatomical tree structures is presented. A tree is classified based on direct comparisons with other trees in a dissimilarity-based classification scheme. The pair-wise dissimilarity measure between two trees is based on a linear assignment...... by including anatomical features in the branch feature vectors. The proposed approach is applied to classify airway trees in computed tomography images of subjects with and without chronic obstructive pulmonary disease (COPD). Using the wall area percentage (WA%), a common measure of airway abnormality in COPD...

  11. Deficiencies in Indian Joint Operations

    Science.gov (United States)

    2016-05-26

    compartmentalization, and bureaucratic inefficiencies. Indian regional hegemony in South Asia faces significant risks without critically needed reforms to enable...illustrates India’s limited capability to conduct joint operations. Specifically, India demonstrated critical planning deficiencies in joint...society, and this has influenced its understanding of theory and concepts, and its application of those ideas in the development of its own joint

  12. [Dissertations 25 years after date 43. Temporomandibular joint dysfunction and condylar resorption following orthognathic surgery].

    Science.gov (United States)

    Kerstens, H C J

    2015-12-01

    A surgical-orthodontic treatment has a direct influence on a patient's skeletal, dental, functional and psychological factors. A variety of surgical and anatomical factors determine the result of this complex treatment. Risk factors are a retrognathy with a steep mandibular angle, and the anatomy of the mandibular condyles and the fossa. The customary surgical techniques have an enhancing influence on the function of the temporomandibular joint. The role of the position of the articular disc remains unclear. Since 1989, more insight has gradually been gained in the aspects having an influence on the function of the temporomandibular joint following orthognathic surgery.

  13. Can the reliability of three-dimensional running kinematics be improved using functional joint methodology?

    Science.gov (United States)

    Pohl, Michael B; Lloyd, Chandra; Ferber, Reed

    2010-10-01

    Traditional three-dimensional gait analyses require the skilled palpation of anatomical landmarks to identify joint parameters and produce reliable joint kinematics. Functional methods have been developed to help improve the reliability and validity of identifying joint kinematic parameters. The purpose of this study was to investigate whether a functional method could improve the between-day reliability of joint kinematics during running compared to a traditional manual marker placement method. It was hypothesised that the functional technique would result in greater within- and between-tester reliability. An eight-camera motion analysis system was used to evaluate the reliability of 3D lower extremity kinematics during running for both a functional and a manual marker placement technique. Reliability of the waveform shape, amplitude and offset of the kinematic curves was assessed using the coefficient of multiple correlation, range of motion and root mean square error respectively. The functional joint methodology did not improve the within- and between-tester reliability in terms of kinematic curve shape, amplitude or offset compared to the manual placement technique. When experienced examiners are used to place the anatomical markers together with a lean subject sample, functional methods may not improve the day-to-day reliability of three-dimensional gait kinematics over traditional marker placement techniques.

  14. Kinematic models of lower limb joints for musculo-skeletal modelling and optimization in gait analysis.

    Science.gov (United States)

    Leardini, Alberto; Belvedere, Claudio; Nardini, Fabrizio; Sancisi, Nicola; Conconi, Michele; Parenti-Castelli, Vincenzo

    2017-05-22

    Kinematic models of lower limb joints have several potential applications in musculoskeletal modelling of the locomotion apparatus, including the reproduction of the natural joint motion. These models have recently revealed their value also for in vivo motion analysis experiments, where the soft-tissue artefact is a critical known problem. This arises at the interface between the skin markers and the underlying bone, and can be reduced by defining multibody kinematic models of the lower limb and by running optimization processes aimed at obtaining estimates of position and orientation of relevant bones. With respect to standard methods based on the separate optimization of each single body segment, this technique makes it also possible to respect joint kinematic constraints. Whereas the hip joint is traditionally assumed as a 3 degrees of freedom ball and socket articulation, many previous studies have proposed a number of different kinematic models for the knee and ankle joints. Some of these are rigid, while others have compliant elements. Some models have clear anatomical correspondences and include real joint constraints; other models are more kinematically oriented, these being mainly aimed at reproducing joint kinematics. This paper provides a critical review of the kinematic models reported in literature for the major lower limb joints and used for the reduction of soft-tissue artefact. Advantages and disadvantages of these models are discussed, considering their anatomical significance, accuracy of predictions, computational costs, feasibility of personalization, and other features. Their use in the optimization process is also addressed, both in normal and pathological subjects. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Controversies relating to the management of acromioclavicular joint dislocations.

    Science.gov (United States)

    Modi, C S; Beazley, J; Zywiel, M G; Lawrence, T M; Veillette, C J H

    2013-12-01

    The aim of this review is to address controversies in the management of dislocations of the acromioclavicular joint. Current evidence suggests that operative rather than non-operative treatment of Rockwood grade III dislocations results in better cosmetic and radiological results, similar functional outcomes and longer time off work. Early surgery results in better functional and radiological outcomes with a reduced risk of infection and loss of reduction compared with delayed surgery. Surgical options include acromioclavicular fixation, coracoclavicular fixation and coracoclavicular ligament reconstruction. Although non-controlled studies report promising results for arthroscopic coracoclavicular fixation, there are no comparative studies with open techniques to draw conclusions about the best surgical approach. Non-rigid coracoclavicular fixation with tendon graft or synthetic materials, or rigid acromioclavicular fixation with a hook plate, is preferable to fixation with coracoclavicular screws owing to significant risks of loosening and breakage. The evidence, although limited, also suggests that anatomical ligament reconstruction with autograft or certain synthetic grafts may have better outcomes than non-anatomical transfer of the coracoacromial ligament. It has been suggested that this is due to better restoration horizontal and vertical stability of the joint. Despite the large number of recently published studies, there remains a lack of high-quality evidence, making it difficult to draw firm conclusions regarding these controversial issues.

  16. Achieving joint benefits from joint implementation

    Energy Technology Data Exchange (ETDEWEB)

    Moomaw, W.R. [Tufts Univ., Medford, MA (United States)

    1995-11-01

    Joint Implementation (JI) appears to have been born with Applied Energy Services Guatemala project in 1988. That project, to plant 52 million trees, protect existing forests from cutting and fire, and enhance rural development, is being implemented by CARE Guatemala to offset 120 per cent of the emissions of a small coal burning power plant that has been built in Connecticut. Since that time, several utilities and governments have initiated additional projects. Not all of these necessarily consist of tree planting in other countries, but may consist of energy efficiency or energy conservation programs designed to reduce carbon emissions by at least as much as the additional releases from a new facility. All JI projects share the characteristic of linking the release of greenhouse gases in an industrial country with an offset that reduces or absorbs a comparable amount in another country. The emitter in the industrial country is willing to pay for the reduction elsewhere because costs are less than they would be at home.

  17. Achieving joint benefits from joint implementation

    Energy Technology Data Exchange (ETDEWEB)

    Moomaw, W.R. [Tufts Univ., Medford, MA (United States)

    1995-11-01

    Joint Implementation (JI) appears to have been born with Applied Energy Services Guatemala project in 1988. That project, to plant 52 million trees, protect existing forests from cutting and fire, and enhance rural development, is being implemented by CARE Guatemala to offset 120 per cent of the emissions of a small coal burning power plant that has been built in Connecticut. Since that time, several utilities and governments have initiated additional projects. Not all of these necessarily consist of tree planting in other countries, but may consist of energy efficiency or energy conservation programs designed to reduce carbon emissions by at least as much as the additional releases from a new facility. All JI projects share the characteristic of linking the release of greenhouse gases in an industrial country with an offset that reduces or absorbs a comparable amount in another country. The emitter in the industrial country is willing to pay for the reduction elsewhere because costs are less than they would be at home.

  18. Colloidal joints with designed motion range and tunable joint flexibility.

    Science.gov (United States)

    Chakraborty, Indrani; Meester, Vera; van der Wel, Casper; Kraft, Daniela J

    2017-06-14

    The miniaturization of machines towards the micron and nanoscale requires the development of joint-like elements that enable and constrain motion. We present a facile method to create colloidal joints, that is, anisotropic colloidal particles functionalized with surface mobile DNA linkers that control the motion range of bonded particles. We demonstrate quantitatively that we can control the flexibility of these colloidal joints by tuning the DNA linker concentration in the bond area. We show that the shape of the colloidal joint controls the range of motion of bonded particles through a maximisation of the bond area. Using spheres, cubes, and dumbbells, we experimentally realize spherical joints, planar sliders, and hinges, respectively. Finally we demonstrate the potential of the colloidal joints for programmable bottom-up self-assembly by creating flexible colloidal molecules and colloidal polymers. The reconfigurability and motion constraint offered by our colloidal joints make them promising building blocks for the development of switchable materials and nanorobots.

  19. Dynamic stereometry of the temporomandibular joint.

    Science.gov (United States)

    Palla, S; Gallo, L M; Gössi, D

    2003-01-01

    Studies on jaw kinematics have provided a good understanding of the motion of the mandible in space, but are of little biomechanical relevance because they could not relate the movements to anatomic structures. This is possible by the combination of three-dimensional reconstructions of the temporomandibular joint (TMJ) anatomy with jaw motion recordings. This technique allows us to analyze the variation of the relationship between the articular surfaces, providing indirect insight into disk deformation during function and parafunction as well as TMJ loading. As far as the variation of the condyle-fossa distance is concerned, data indicated that during chewing the distance was smaller 1) on closing than on opening; 2) on the balancing than on the working side; and 3) during chewing of hard than soft food. Moreover, during a forceful static biting, the condyle-fossa distance decreased more on the contralateral, i.e. on the balancing side than on the working side. The decrease was related to the degree of clenching force. These results support the content that both condyles are loaded during chewing and the balancing side joint more than the working one. Biomechanically, the development of osteoarthrosis is more likely related to the magnitude and frequency of stresses applied on the cartilage. Joint movements produce tractional forces that may cause shear stresses contributing to cartilage wear and fatigue. Tractional forces are the result of frictional forces caused by the cartilage surface rubbing and of plowing forces caused by the translation of a stress-field through the cartilage matrix, as the intra-articular space changes during motion. Translation of the stress-field in mediolateral direction seems to be particularly important for the integrity of the TMJ disk because of its anisotropic properties. Dynamic stereometry showed that stress-fields translate in mediolateral direction during opening/closing, protrusion and laterotrusion, and that their translatory

  20. COMPUTED TOMOGRAPHIC APPEARANCE OF THE TEMPOROMANDIBULAR JOINT IN 1018 ASYMPTOMATIC HORSES: A MULTI-INSTITUTION STUDY.

    Science.gov (United States)

    Carmalt, James L; Kneissl, Sibylle; Rawlinson, Jennifer E; Zwick, Timo; Zekas, Lisa; Ohlerth, Stefanie; Bienert-Zeit, Astrid

    2016-05-01

    Published descriptions of nonseptic arthritis of the equine temporomandibular joint (TMJ) are rare and large studies investigating variations in the TMJ for asymptomatic horses are lacking. The objectives of this cross-sectional, retrospective, multi-institutional study were to describe anatomical variations in the TMJ detected using computed tomography (CT) in an equid population asymptomatic for TMJ disease and determine whether these variations were associated with patient signalment, reason for CT examination, or CT slice width. Medical records at eight hospitals were searched for horses that had head/neck CT scans and no clinical signs of TMJ disease. Age, breed, sex, clinical presentation, and CT slice width data were recorded. Alterations in CT contour and density of the mandibular condyles, mandibular fossae, and TMJ intra-articular discs were described for each horse. Generalized logistic regression was used to test associations between anatomical variations and horse age. A total of 1018 horses were sampled. Anatomical variations were found in TMJ CT images for 40% of horses and 29% of joints. These were dichotomous with regard to age. Horses horses commonly had spherical hypodensities within the mandibular condyles consistent with bone cysts; and hyperdense regions of the intra-articular disc consistent with dystrophic mineralization. Findings indicated that TMJ anatomic variations were common in CT images of younger and older horses asymptomatic for TMJ disease. Future studies are needed to more definitively characterize these CT variations using gross pathology and histopathology.

  1. Laundry joint venture.

    Science.gov (United States)

    Giancola, D; Voyvodich, M

    1984-12-01

    Many hospitals are concerned about the loss of control which is associated with contracting for linen service. On the the hand, many laundries do not have the resources or experience to serve hospitals in a comprehensive and trouble-free manner. In many communities a joint venture, such as the one described here, can successfully combine the interests of the hospital and laundry communities without causing the hospitals to lose control of the service and without requiring the laundry operator to have detailed knowledge of hospital operations. As more hospitals opt for contract service, and if this service is to be provided at the lowest total cost, the hospitals and the laundries must come to grips with the problems surrounding the laundry-hospital interface. A joint venture, such as that described here, is one way to accomplish this.

  2. Peripheral degenerative joint diseases

    Directory of Open Access Journals (Sweden)

    Nilzio Antonio da Silva

    2008-03-01

    Full Text Available Osteoarthritis, a degenerative joint disease, is the most commonrheumatic disorder mainly in a geriatric population. Manifestationsare pain, stiffness and functional loss in the affected joint.According to etiology it is classifi ed as primary (or idiopathicand secondary. Some risk factors for disease development aregenetics, race, age, sex, obesity, occupational activities andarticular biomechanics. Pathogenesis is the same for any cause orlocalization, being catabolic alterations, with synthesis, inhibitionand reparing intent of the cartilage matrix. Metalloproteinases andcytokines (IL-1,IL-6,TNF-α actions promote infl ammatory reactionand cartilage degradation. Pain, the most important symptom,does not correlate with radiologic fi ndings. Peripheral osteoarthritisoccurs predominantly in the knee, hip and hand. Diagnosis is basedon clinical features, laboratorial tests and radiological changes.Rheumatological associations’ guidelines for treatment includenon-pharmacologic (education, physiotherapy, assistive devices,and pharmacologic (analgesics, anti-infl ammatory drugs therapyand surgery. Arthroplasty seems to work better than medicines, butshould be used if other treatments have failed.

  3. Joint International Accelerator School

    CERN Multimedia

    CERN Accelerator School

    2014-01-01

    The CERN and US Particle Accelerator Schools recently organised a Joint International Accelerator School on Beam Loss and Accelerator Protection, held at the Hyatt Regency Hotel, Newport Beach, California, USA from 5-14 November 2014. This Joint School was the 13th in a series of such schools, which started in 1985 and also involves the accelerator communities in Japan and Russia.   Photo courtesy of Alfonse Pham, Michigan State University.   The school attracted 58 participants representing 22 different nationalities, with around half from Europe and the other half from Asia and the Americas. The programme comprised 26 lectures, each of 90 minutes, and 13 hours of case study. The students were given homework each day and had an opportunity to sit a final exam, which counted towards university credit. Feedback from the participants was extremely positive, praising the expertise and enthusiasm of the lecturers, as well as the high standard and quality of their lectures. Initial dis...

  4. Insights into cryotherapy and joint bleeding: cryotherapy and hemophilia.

    Science.gov (United States)

    Ravanbod, Roya; Torkaman, Giti; Hedayati, Mehdi; Nezhad, Mohammad Esmaeil Zandi

    2017-02-21

    There is some controversy over the use of cryotherapy. Low temperatures (Temp) could interfere with coagulation and increase the risk of bleeding. We sought to examine the effect of cryotherapy on joint swelling, temperature, friction, and inflammatory condition after experimental hemarthrosis. The left knee of 23 albino rabbits, 10 in heparin Ice, five in citrate Ice, four in heparin control, and four in citrate control were injected intraarticularly with 1 ml of blood. In total, four animals were considered to be in normal control group. Joint diameter, Temp, and ultrasonography were assessed before the blood injection. One day after the intraarticular blood injection, cryotherapy was applied 4 times per day for 4 consecutive days. Joint diameter and Temp were measured twice a day. After cessation of the protocol, joint diameter and Temp were assessed and sonography performed, animals euthanized, the friction test was performed and the synovial membrane collected, respectively. Joint diameter and Temp were increased after the intraarticular blood injection. Cryotherapy was capable of reducing the swelling and Temp. Ultrasonography findings approved the positive effect of cryotherapy on joint swelling. The proinflammatory TNF-α reduced by cryotherapy in both cryotherapy groups but Interleukin 1β was only reduced in heparin group. Interleukin-4 increased in heparin Ice group that was in comparison with TNF-α reduction. Cryotherapy reduced joint swelling and has a positive effect on controlling joint inflammation and Temp.

  5. Computed tomography of bones and joints.

    Science.gov (United States)

    Bruna, J; Sehr, A

    1989-01-01

    The monograph sums up the problem of CT diagnosis of bones and joints making use of predominantly the authors' own experience based on CT tests of more than 45,000 patients examined at the Department of Radiology, Charles University Medical Faculty of Hygiene teaching hospital in Prague in the years 1980-1988. Specific scans of the skeleton were made in 4,500 patients, mostly for suspicion or closer assessment of neoplasms (43.5%), the radicular lumbosacral syndrome (34.5%), and injuries (12%). The opening chapters sum up basic facts about the principle of computed tomography, the apparatus in use, the evaluation of CT images, CT radiation doses, and the patients' preparation for CT scanning. The use of contrast media is discussed with regard to the possible hazards involved and to the need to hear allergological opinion first. For spinal canal visualization non-ionogenic contrast media are used exclusively. The management of side reactions to contrast medium application is also reviewed. Indications for bone and joint computed tomography now comprise a whole series of traumatological, orthopaedic, oncological, rheumatological, neurological and rehabilitation conditions, each of which is discussed in detail in a separate chapter. CT anatomical studies offer the advantage of being applicable even in patients examined for other than bone or articular diseases. The option of simultaneous soft tissue assessment represents another advantage. The authors describe different anatomical structures in terms of CT images, some of them complete with dimensional and density values. The chapter on anomalies and developmental variants stresses the relevance of computed tomography for precise characteristics of clefts of the spinal column and facial bones and for the diagnosis of anomalies and dysplasias of the spinal column and the chest. A rare case of cephalothoracopagus is demonstrated. As for traumatology, computed tomography is found useful in diagnosing fractures of the

  6. [A particular temporomandibular disorder: the temporomandibular joint ankylosis. Basic and clinical concepts].

    Science.gov (United States)

    Bocquet, Emmanuelle; Mercier, Marie; Moreau, Alexis; Ferri, Joël; Danguy, Michel

    2014-12-01

    Ankylosis of the temporomandibular joint mostly affects children and young adults. Although it is rare, it is an extremely debilitating disease whose effects on growth, morphological development and personal development are significant. To manage this disorder, it is essential to be informed about the causes, about the anatomical shapes it presents and about its symptoms. This knowledge will also help us choose the most appropriate therapy, that may nevertheless result in failures and in relapses requiring prosthetic rehabilitation.

  7. Horizontal and Vertical Stabilization of Acute Unstable Acromioclavicular Joint Injuries Arthroscopy-Assisted

    Science.gov (United States)

    Cisneros, Luis Natera; Sarasquete Reiriz, Juan; Besalduch, Marina; Petrica, Alexandru; Escolà, Ana; Rodriguez, Joaquim; Fallone, Jan Carlo

    2015-01-01

    We describe the technical aspects of an arthroscopy-assisted procedure indicated for the management of acute unstable acromioclavicular joint injuries, consisting of a synthetic augmentation of both the coracoclavicular and acromioclavicular ligaments, that anatomically reproduces the coracoclavicular biomechanics and offers fixation that keeps the torn ends of the ligaments facing one another, thus allowing healing of the native structures without the need for a second surgical procedure for metal hardware removal. PMID:26870653

  8. Joint Urban Operations

    Science.gov (United States)

    2009-11-08

    in Kosovo , the Red Cross provided the most accurate figures on the number of Kosovo refugees, helping US and other coalition services to estimate the...Port-au-Prince, Ramadi, Fallujah, and cities in Bosnia, Serbia, and Kosovo ). This clearly indicates an increase in the frequency of US joint...areas perhaps including shantytowns, and military areas. Buildings may range from single-story wooden or mud dwellings to high-rise apartments and

  9. The international joint commission

    OpenAIRE

    Clamens, Murray

    2005-01-01

    For over 92 years the International Joint Commission (IJC), United States and Canada, has effectively served the two nations in approving and providing continuous oversight of water resource projects along the 5000-mile common border, in assisting the governments in preventing and resolving issues and disagreements regarding the use of these waters, and in addressing other environmental issues affecting or potentially affecting one or both of the countries. During the first years of the 20th...

  10. Joint Forces Capabilities

    Science.gov (United States)

    2007-11-02

    for countering the proliferation of weapons of mass destruction (WMD) in space. The Space Operations Center ( SPOC ), USSPACECOM is the single point...of contact for assessing space capabilities. Combatant commanders, subordinate JFCs, and Services can access this information from the SPOC via the...special operations forces SPOC Space Operations Center SSBN fleet ballistic missile submarine SST space support team UJTL Universal Joint Task List UN

  11. Successfully Developing Joint Leaders

    Science.gov (United States)

    2010-07-26

    officer’s pyramid representing his career, there is merely the word “joint”. Therefore, unless the officer adamantly pursues a joint assignment it...had the chance to participate in Bosnia stability operations. It is how we were taught to work with locals and the experiences I took with me that...Drug Ops, OAF, OEF, OIF, Bosnia , Unconventional) - When you participated in an operation was there any “joint” involvement? If “yes”, did you feel

  12. Nonarthritic hip joint pain.

    Science.gov (United States)

    Enseki, Keelan; Harris-Hayes, Marcie; White, Douglas M; Cibulka, Michael T; Woehrle, Judith; Fagerson, Timothy L; Clohisy, John C

    2014-06-01

    The Orthopaedic Section of the American Physical Therapy Association (APTA) has an ongoing effort to create evidence-based practice guidelines for orthopaedic physical therapy management of patients with musculoskeletal impairments described in the World Health Organization's International Classification of Functioning, Disability, and Health (ICF). The purpose of these clinical practice guidelines is to describe the peer-reviewed literature and make recommendations related to nonarthritic hip joint pain.

  13. [Temporomandibular joint: MRI diagnostics].

    Science.gov (United States)

    Kress, B; Schmitter, M

    2005-09-01

    MRI of the temporomandibular joint (TMJ) requires 1.5 T. The radiologist must be familiar with the anatomy and pathology of the TMJ. This review gives a description of MRI protocols for the TMJ, and MRI anatomy and pathology of the TMJ (open and closed mouth) by means of MR images and drawings. Diagnosing of the TMJ related diseases depends on standardized clinical and MR examinations. Therefore close interdisciplinary cooperation between dentist and radiologist is necessary.

  14. Realignment Subtalar Joint Arthrodesis.

    Science.gov (United States)

    Hentges, Matthew J; Gesheff, Martin G; Lamm, Bradley M

    2016-01-01

    Subtalar joint arthrodesis is a commonly performed procedure for the correction of hindfoot deformity and/or the relief of pain related to osteoarthritis. The purpose of the present study was to provide preoperative and intraoperative objective radiographic parameters to improve the accuracy and long-term success of realignment arthrodesis of the subtalar joint. We retrospectively reviewed the data from 16 patients, 11 male (57.9%) and 8 female (42.1%) feet, who had undergone realignment subtalar joint arthrodesis. A total of 19 fusions were performed in 9 (47.4%) right and 10 (52.6%) left feet, with a mean follow-up period of 2 (range 1 to 4.8) years. The mean age at surgery was 54.5 (range 14 to 77) years. Statistically significant improvement in radiographic alignment was found in the anteroposterior talo-first metatarsal angle (p = .002), lateral talo-first metatarsal angle (p < .001), tibial-calcaneal angle (p < .001), and tibial-calcaneal distance (p < .001). A positive correlation was observed between the tibial-calcaneal angle and tibial-calcaneal distance (r = 0.825, p < .001). The statistically significant improvement in tibial-calcaneal alignment, in both angulation and distance, support our conclusions that proper realignment of the calcaneus to vertical and central under the tibia will lead to short-term success and, likely, long-term success of subtalar joint arthrodesis. Copyright © 2016 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

  15. Australias Joint Approach

    Science.gov (United States)

    2015-09-01

    offensive support (including NGS) in Exercise Tasman Link at Shoalwater Bay in 1986. A similar joint and combined exercise was held as part of Talisman ...in 2003, the exercise series was again re-named Talisman Sabre (TS) and these exercises have been conducted every two years since 2005. The exercise...work/News-and-media/News-and-media-2013/News-and-media-July-2013/Exercise- Talisman -Saber-2013-begins, as sighted on 1 December 2014. UNCLASSIFIED DST

  16. Anatomical Directional Dissimilarities in Tri-axial Swallowing Accelerometry Signals.

    Science.gov (United States)

    Movahedi, Faezeh; Kurosu, Atsuko; Coyle, James L; Perera, Subashan; Sejdic, Ervin

    2017-05-01

    Swallowing accelerometry is a noninvasive approach currently under consideration as an instrumental screening test for swallowing difficulties, with most current studies focusing on the swallowing vibrations in the anterior-posterior (A-P) and superior-inferior (S-I) directions. However, the displacement of the hyolaryngeal structure during the act of swallowing in patients with dysphagia involves declination of the medial-lateral (M-L), which suggests that the swallowing vibrations in the M-L direction have the ability to reveal additional details about the swallowing function. With this motivation, we performed a broad comparison of the swallowing vibrations in all three anatomical directions. Tri-axial swallowing accelerometry signals were concurrently collected from 72 dysphagic patients undergoing videofluoroscopic evaluation of swallowing (mean age: 63.94 ± 12.58 years period). Participants swallowed one or more thickened liquids with different consistencies including thin-thick liquids, nectar-thick liquids, and pudding-thick liquids with either a comfortable self-selected volume from a cup or a controlled volume by the examiner from a 5-ml spoon. Swallows were grouped based on the viscosity of swallows and the participant's stroke history. Then, a comprehensive set of features was extracted in multiple signal domains from 881 swallows. The results highlighted inter-axis dissimilarities among tri-axial swallowing vibrations including the extent of variability in the amplitude of signals, the degree of predictability of signals, and the extent of disordered behavior of signals in time-frequency domain. First, the upward movement of the hyolaryngeal structure, representing the S-I signals, were actually more variable in amplitude and showed less predictable behavior than the sideways and forward movements, representing the A-P and M-L signals, during swallowing. Second, the S-I signals, which represent the upward movement of the hyolaryngeal structure

  17. Comparison of stance phase knee joint angles and moments using two different surface marker representations of the proximal shank in walkers and runners.

    Science.gov (United States)

    Petit, Daniel J; Willson, John D; Barrios, Joaquin A

    2014-02-01

    Efforts to compare different surface marker configurations in 3-dimensional motion analysis are warranted as more complex and custom marker sets become more common. At the knee, different markers can been used to represent the proximal shank. Often, two anatomical markers are placed over the femoral condyles, with their midpoint defining both the distal thigh and proximal shank segment ends. However, two additional markers placed over the tibial plateaus have been used to define the proximal shank end. For this experiment, simultaneous data for both proximal shank configurations were independently collected at two separate laboratories by different investigators, with one laboratory capturing a walking population and the other a running population. Common discrete knee joint variables were then compared between marker sets in each population. Using the augmented marker set, peak knee flexion after weight acceptance was less (1.2-1.7°, P knee adduction was greater (0.7-1.4°, P knee flexion moment was less by 15-20% and internal rotation moment was greater by 11-18% (P knee joint mechanics are influenced by the proximal shank's segment endpoint definition, independent of dynamic task, investigator, laboratory environment, and population in this study.

  18. Framework for radiation pneumonitis risk stratification based on anatomic and perfused lung dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    Dhami, Gurleen; Zeng, Jing; Patel, Shilpen A.; Rengan, Ramesh [University of Washington School of Medicine, Department of Radiation Oncology, Seattle, WA (United States); Vesselle, Hubert J.; Kinahan, Paul E.; Miyaoka, Robert S. [University of Washington School of Medicine, Department of Radiology, Seattle, WA (United States); Bowen, Stephen R. [University of Washington School of Medicine, Department of Radiation Oncology, Seattle, WA (United States); University of Washington School of Medicine, Department of Radiology, Seattle, WA (United States)

    2017-05-15

    To design and apply a framework for predicting symptomatic radiation pneumonitis in patients undergoing thoracic radiation, using both pretreatment anatomic and perfused lung dose-volume parameters. Radiation treatment planning CT scans were coregistered with pretreatment [{sup 99m}Tc]MAA perfusion SPECT/CT scans of 20 patients who underwent definitive thoracic radiation. Clinical radiation pneumonitis was defined as grade ≥ 2 (CTCAE v4 grading system). Anatomic lung dose-volume parameters were collected from the treatment planning scans. Perfusion dose-volume parameters were calculated from pretreatment SPECT/CT scans. Equivalent doses in 2 Gy per fraction were calculated in the lung to account for differences in treatment regimens and spatial variations in lung dose (EQD2{sub lung}). Anatomic lung dosimetric parameters (MLD) and functional lung dosimetric parameters (pMLD{sub 70%}) were identified as candidate predictors of grade ≥ 2 radiation pneumonitis (AUC > 0.93, p < 0.01). Pairing of an anatomic and functional dosimetric parameter (e.g., MLD and pMLD{sub 70%}) may further improve prediction accuracy. Not all individuals with high anatomic lung dose (MLD > 13.6 GyEQD2{sub lung}, 19.3 Gy for patients receiving 60 Gy in 30 fractions) developed radiation pneumonitis, but all individuals who also had high mean dose to perfused lung (pMLD{sub 70%} > 13.3 GyEQD2) developed radiation pneumonitis. The preliminary application of this framework revealed differences between anatomic and perfused lung dosimetry in this limited patient cohort. The addition of perfused lung parameters may help risk stratify patients for radiation pneumonitis, especially in treatment plans with high anatomic mean lung dose. Further investigations are warranted. (orig.) [German] Erstellung und Anwendung eines Rahmenwerks zur Vorhersage symptomatischer Strahlenpneumonitis bei Patienten mit einer Thorax-Bestrahlung anhand anatomischer und perfundierter Lungendosis-Volumen-Parameter in der

  19. Locals Collection

    Directory of Open Access Journals (Sweden)

    Stephen Hastings-King

    2010-03-01

    Full Text Available A locals collection is a set of parameters that are used to delimit data-mining operations. This piece uses a collection of locals from around Essex Massachusetts to shape and delimit an interrogation of post-reality in contemporary America. It explores the notion of crisis, the possibility of a crisis of empire that may or may not emerge in a media-space that does not allow crisis of empire to be mentioned and relations this maybe-crisis to the various levels of economic dysfunction that have become evident since late 2008. But mostly this piece explores ways in which particular stories about particular people do and do not link/link to these larger-scale narratives. This is the first of a potential series of locals collections that will mine the American post-real.

  20. Laboratory characterization of rock joints

    Energy Technology Data Exchange (ETDEWEB)

    Hsiung, S.M.; Kana, D.D.; Ahola, M.P.; Chowdhury, A.H.; Ghosh, A. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

    1994-05-01

    A laboratory characterization of the Apache Leap tuff joints under cyclic pseudostatic and dynamic loads has been undertaken to obtain a better understanding of dynamic joint shear behavior and to generate a complete data set that can be used for validation of existing rock-joint models. Study has indicated that available methods for determining joint roughness coefficient (JRC) significantly underestimate the roughness coefficient of the Apache Leap tuff joints, that will lead to an underestimation of the joint shear strength. The results of the direct shear tests have indicated that both under cyclic pseudostatic and dynamic loadings the joint resistance upon reverse shearing is smaller than that of forward shearing and the joint dilation resulting from forward shearing recovers during reverse shearing. Within the range of variation of shearing velocity used in these tests, the shearing velocity effect on rock-joint behavior seems to be minor, and no noticeable effect on the peak joint shear strength and the joint shear strength for the reverse shearing is observed.

  1. Laboratory characterization of rock joints

    Energy Technology Data Exchange (ETDEWEB)

    Hsiung, S.M.; Kana, D.D.; Ahola, M.P.; Chowdhury, A.H.; Ghosh, A. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

    1994-05-01

    A laboratory characterization of the Apache Leap tuff joints under cyclic pseudostatic and dynamic loads has been undertaken to obtain a better understanding of dynamic joint shear behavior and to generate a complete data set that can be used for validation of existing rock-joint models. Study has indicated that available methods for determining joint roughness coefficient (JRC) significantly underestimate the roughness coefficient of the Apache Leap tuff joints, that will lead to an underestimation of the joint shear strength. The results of the direct shear tests have indicated that both under cyclic pseudostatic and dynamic loadings the joint resistance upon reverse shearing is smaller than that of forward shearing and the joint dilation resulting from forward shearing recovers during reverse shearing. Within the range of variation of shearing velocity used in these tests, the shearing velocity effect on rock-joint behavior seems to be minor, and no noticeable effect on the peak joint shear strength and the joint shear strength for the reverse shearing is observed.

  2. Anatomical Shape and Motion Reconstruction from Sparse Image Data

    NARCIS (Netherlands)

    N. Baka (Nora)

    2012-01-01

    textabstractIn current clinical practice, medical imaging plays a key role in diagnosis, therapy planning and therapy monitoring. Some of these modalities, such as CT, MRI, and 3D ultrasound, provide high resolution volumetric anatomical information, and more recently, 3D imaging in time. In certain

  3. Constructivist Learning of Anatomy: Gaining Knowledge by Creating Anatomical Casts

    Science.gov (United States)

    Hermiz, David J.; O'Sullivan, Daniel J.; Lujan, Heidi L.; DiCarlo, Stephen E.

    2011-01-01

    Educators are encouraged to provide inquiry-based, collaborative, and problem solving activities that enhance learning and promote curiosity, skepticism, objectivity, and the use of scientific reasoning. Making anatomical casts or models by injecting solidifying substances into organs is an example of a constructivist activity for achieving these…

  4. the repair-workshop theory: supervising anatomical research

    African Journals Online (AJOL)

    2015-12-18

    Dec 18, 2015 ... leadership strategies is crucial to unlocking the anatomical research potential. The importation of ... contextual constraints and has significant implications for managing unclear research goals in African anatomy ... the organisation, and allows activities to be ..... inflationary cost pressures, of which the UZ.

  5. Segmentation of anatomical structures in chest CT scans

    NARCIS (Netherlands)

    van Rikxoort, E.M.

    2009-01-01

    In this thesis, methods are described for the automatic segmentation of anatomical structures from chest CT scans. First, a method to segment the lungs from chest CT scans is presented. Standard lung segmentation algorithms rely on large attenuation differences between the lungs and the surrounding

  6. A hierarchical scheme for geodesic anatomical labeling of airway trees

    DEFF Research Database (Denmark)

    Feragen, Aasa; Petersen, Jens; Owen, Megan;

    2012-01-01

    We present a fast and robust supervised algorithm for label- ing anatomical airway trees, based on geodesic distances in a geometric tree-space. Possible branch label configurations for a given unlabeled air- way tree are evaluated based on the distances to a training set of labeled airway trees....

  7. Surface anatomy and anatomical planes in the adult turkish population.

    Science.gov (United States)

    Uzun, C; Atman, E D; Ustuner, E; Mirjalili, S A; Oztuna, D; Esmer, T S

    2016-03-01

    Surface anatomy and anatomical planes are widely used in education and clinical practice. The planes are largely derived from cadaveric studies and their projections on the skin show discrepancies between and within anatomical reference textbooks. In this study, we reassessed the accuracy of common thoracic and abdominopelvic anatomical planes using computed tomography (CT) imaging in the live adult Turkish population. After patients with distorting pathologies had been excluded, CT images of 150 supine patients at the end tidal inspiration were analyzed. Sternal angle, transpyloric, subcostal, supracristal and pubic crest planes and their relationships to anatomical structures were established by dual consensus. The tracheal bifurcation, azygos vein/superior vena cava (SVC) junction and pulmonary bifurcation were usually below the sternal angle while the concavity of the aortic arch was generally within the plane. The tip of the tenth rib, the superior mesenteric artery and the portal vein were usually within the transpyloric plane while the renal hila and the fundus of the gallbladder were below it. The inferior mesenteric artery was below the subcostal plane and the aortic bifurcation was below the supracristal plane in most adults. Projectional surface anatomy is fundamental to medical education and clinical practice. Modern cross-sectional imaging techniques allow large groups of live patients to be examined. Classic textbook information regarding anatomy needs to be reviewed and updated using the data gathered from these recent studies, taking ethnic differences into consideration.

  8. CAVEman: Standardized Anatomical Context for Biomedical Data Mapping

    Science.gov (United States)

    Turinsky, Andrei L.; Fanea, Elena; Trinh, Quang; Wat, Stephen; Hallgrimsson, Benedikt; Dong, Xiaoli; Shu, Xueling; Stromer, Julie N.; Hill, Jonathan W.; Edwards, Carol; Grosenick, Brenda; Yajima, Masumi; Sensen, Christoph W.

    2008-01-01

    The authors have created a software system called the CAVEman, for the visual integration and exploration of heterogeneous anatomical and biomedical data. The CAVEman can be applied for both education and research tasks. The main component of the system is a three-dimensional digital atlas of the adult male human anatomy, structured according to…

  9. Dissimilarity-based classification of anatomical tree structures

    DEFF Research Database (Denmark)

    Sørensen, Lauge; Lo, Pechin Chien Pau; Dirksen, Asger

    2011-01-01

    A novel method for classification of abnormality in anatomical tree structures is presented. A tree is classified based on direct comparisons with other trees in a dissimilarity-based classification scheme. The pair-wise dissimilarity measure between two trees is based on a linear assignment betw...

  10. An anatomical and functional topography of human auditory cortical areas

    Directory of Open Access Journals (Sweden)

    Michelle eMoerel

    2014-07-01

    Full Text Available While advances in magnetic resonance imaging (MRI throughout the last decades have enabled the detailed anatomical and functional inspection of the human brain non-invasively, to date there is no consensus regarding the precise subdivision and topography of the areas forming the human auditory cortex. Here, we propose a topography of the human auditory areas based on insights on the anatomical and functional properties of human auditory areas as revealed by studies of cyto- and myelo-architecture and fMRI investigations at ultra-high magnetic field (7 Tesla. Importantly, we illustrate that - whereas a group-based approach to analyze functional (tonotopic maps is appropriate to highlight the main tonotopic axis - the examination of tonotopic maps at single subject level is required to detail the topography of primary and non-primary areas that may be more variable across subjects. Furthermore, we show that considering multiple maps indicative of anatomical (i.e. myelination as well as of functional properties (e.g. broadness of frequency tuning is helpful in identifying auditory cortical areas in individual human brains. We propose and discuss a topography of areas that is consistent with old and recent anatomical post mortem characterizations of the human auditory cortex and that may serve as a working model for neuroscience studies of auditory functions.

  11. Anatomical segmentation of the human medial prefrontal cortex

    NARCIS (Netherlands)

    Corcoles-Parada, M.; Muller, N.C.J.; Ubero, M.; Serrano-Del-Pueblo, V.M.; Mansilla, F.; Marcos-Rabal, P.; Artacho-Perula, E.; Dresler, M.; Insausti, R.; Fernandez, G.; Munoz-Lopez, M.

    2017-01-01

    The medial prefrontal areas 32, 24, 14, and 25 (mPFC) form part of the limbic memory system, but little is known about their functional specialization in humans. To add anatomical precision to structural and functional magnetic resonance imaging (MRI) data, we aimed to identify these mPFC subareas i

  12. Anatomic considerations for abdominally placed permanent left ventricular assist devices.

    Science.gov (United States)

    Parnis, S M; McGee, M G; Igo, S R; Dasse, K; Frazier, O H

    1989-01-01

    To determine anatomic parameters for a permanent, electrically actuated left ventricular assist device (LVAD), the effects of abdominal placement of pneumatic LVADs used as temporary support for patients awaiting heart transplantation was studied. Understanding the anatomic constraints imposed by the abdominal viscera in LVAD placement is crucial, because improper placement can result in compression or obstruction of adjacent structures. Anatomic compatibility was assessed in four men (age 22-48 years) who were supported by the LVAD for over 1 month (range 35-132 days). The pump was intraperitoneally placed in the left upper quadrant. Radiographic techniques were employed, including CT scanning (with patients supine) and contrast imaging (patients in anatomical position), and the pump and conduits appeared to be properly positioned, with minimal compression of the body of the stomach, and no obstruction of adjacent organs. Three patients returned to a solid food diet and exercised daily by stationary cycling and walking. No signs of migration or erosion of the pump were present at the time of LVAD removal and cardiac transplantation. Successful clinical experience with short-term use of the LVAD suggests that the electrically actuated device can be well tolerated in patients requiring permanent left ventricular assistance.

  13. Optimizing conditions for computer-assisted anatomical learning

    NARCIS (Netherlands)

    Luursema, Jan-Maarten; Verwey, Willem B.; Kommers, Piet A.M.; Geelkerken, Robert H.; Vos, Hans J.

    2006-01-01

    An experiment evaluated the impact of two typical features of virtual learning environments on anatomical learning for users of differing visuo-spatial ability. The two features studied are computer-implemented stereopsis (the spatial information that is based on differences in visual patterns proje

  14. The role of stereopsis in virtual anatomical learning

    NARCIS (Netherlands)

    Luursema, Jan-Maarten; Verwey, Willem B.; Kommers, Piet A.M.; Annema, Jan-Henk

    2008-01-01

    The use of virtual learning environments in the medical field is on the rise. An earlier experiment [Luursema, J.-M., Verwey, W.B., Kommers, P.A.M., Geelkerken, R.H., Vos, H.J., 2006. Optimizing conditions for computer-assisted anatomical learning. Interacting with Computers, 18, 1123–1138.] found t

  15. Mixed transcortical aphasia without anatomic isolation of the speech area.

    Science.gov (United States)

    Rapcsak, S Z; Krupp, L B; Rubens, A B; Reim, J

    1990-06-01

    We report two patients with mixed transcortical aphasia following left frontal lobe infarctions. Although there was no evidence of anatomic isolation of the speech area on computed tomograms or magnetic resonance imaging scans, single-photon emission computed tomography in one case demonstrated diminished blood flow over the left parietal convexity suggestive of "functional isolation" of the posterior perisylvian language zone.

  16. Anatomical and chemical characteristics associated with lodging resistance in wheat

    Institute of Scientific and Technical Information of China (English)

    Eryan; Kong; Dongcheng; Liu; Xiaoli; Guo; Wenlong; Yang; Jiazhu; Sun; Xin; Li; Kehui; Zhan; Dangqun; Cui; Jinxing; Lin; Aimin; Zhang

    2013-01-01

    Anatomical and chemical characteristics of stems affect lodging in wheat(Triticum aestivum L.) cultivars. Traits associated with lodging resistance, such as plant height, stem strength, culm wall thickness, pith diameter, and stem diameter, were extensively investigated in earlier studies. However, the solid stem trait was rarely considered. In this study, we measured a range of anatomical and chemical characteristics on solid and hollow stemmed wheat cultivars. Significant correlations were detected between resistance to lodging and several anatomical features, including width of mechanical tissue, weight of low internodes, and width of stem walls. Morphological features that gave the best indication of improved lodging resistance were increased stem width, width of mechanical tissue layer, and stem density. Multiple linear regression analysis showed that 99% of the variation in lodging resistance could be explained by the width of the mechanical tissue layer, suggesting that solid stemmed wheat has several anatomical features for increasing resistance to lodging. In addition, microsatellite markers GWM247 and GWM340 were linked to a single solid stem QTL on chromosome 3BL in a population derived from the cross Xinongshixin(solid stem)/Line 3159(hollow stem). These markers should be valuable in breeding wheat for solid stem.

  17. Pigmentation in Anuran Testes: Anatomical Pattern and Variation

    OpenAIRE

    Franco-Belussi, Lilian [UNESP; Zieri, Rodrigo [UNESP; de Souza Santos, Lia Raquel; Moresco, Rafaela Maria; Oliveira, Classius de [UNESP

    2009-01-01

    In amphibians, pigmented cells are present in several organs, composing an extracutaneous pigmentary system. Seventeen species from two families were studied to develop a protocol for pigmentary classification. The amount and distribution of these cells are variable, allowing the establishment of anatomical patterns for visceral pigmentation in anuran testes. Anat Rec, 292:178-182, 2009. (C) 2008 Wiley-Liss, Inc.

  18. Recent advances in medical imaging: anatomical and clinical applications.

    Science.gov (United States)

    Grignon, Bruno; Mainard, Laurence; Delion, Matthieu; Hodez, Claude; Oldrini, Guillaume

    2012-10-01

    The aim of this paper was to present an overview of the most important recent advances in medical imaging and their potential clinical and anatomical applications. Dramatic changes have been particularly observed in the field of computed tomography (CT) and magnetic resonance imaging (MRI). Computed tomography (CT) has been completely overturned by the successive development of helical acquisition, multidetector and large area-detector acquisition. Visualising brain function has become a new challenge for MRI, which is called functional MRI, currently based principally on blood oxygenation level-dependent sequences, which could be completed or replaced by other techniques such as diffusion MRI (DWI). Based on molecular diffusion due to the thermal energy of free water, DWI offers a spectrum of anatomical and clinical applications, ranging from brain ischemia to visualisation of large fibrous structures of the human body such as the anatomical bundles of white matter with diffusion tensor imaging and tractography. In the field of X-ray projection imaging, a new low-dose device called EOS has been developed through new highly sensitive detectors of X-rays, allowing for acquiring frontal and lateral images simultaneously. Other improvements have been briefly mentioned. Technical principles have been considered in order to understand what is most useful in clinical practice as well as in the field of anatomical applications. Nuclear medicine has not been included.

  19. Additive Manufacturing of Anatomical Models from Computed Tomography Scan Data.

    Science.gov (United States)

    Gür, Y

    2014-12-01

    The purpose of the study presented here was to investigate the manufacturability of human anatomical models from Computed Tomography (CT) scan data via a 3D desktop printer which uses fused deposition modelling (FDM) technology. First, Digital Imaging and Communications in Medicine (DICOM) CT scan data were converted to 3D Standard Triangle Language (STL) format by using In Vaselius digital imaging program. Once this STL file is obtained, a 3D physical version of the anatomical model can be fabricated by a desktop 3D FDM printer. As a case study, a patient's skull CT scan data was considered, and a tangible version of the skull was manufactured by a 3D FDM desktop printer. During the 3D printing process, the skull was built using acrylonitrile-butadiene-styrene (ABS) co-polymer plastic. The printed model showed that the 3D FDM printing technology is able to fabricate anatomical models with high accuracy. As a result, the skull model can be used for preoperative surgical planning, medical training activities, implant design and simulation to show the potential of the FDM technology in medical field. It will also improve communication between medical stuff and patients. Current result indicates that a 3D desktop printer which uses FDM technology can be used to obtain accurate anatomical models.

  20. The Contribution of Dynamic Exploration to Virtual Anatomical Learning

    Directory of Open Access Journals (Sweden)

    Jan-Maarten Luursema

    2011-01-01

    Full Text Available Virtual Learning Environments are increasingly becoming part of the medical curriculum. In a previous study we (luursema et al., 2006 found that a combination of computer-implemented stereopsis (visual depth through seeing with both eyes and dynamic exploration (being able to continuously change one's viewpoint relative to the studied objects in real time is beneficial to anatomical learning, especially for subjects of low visuo spatial ability (the ability to form, retrieve, and manipulate mental representations of a visuo-spatial nature. A follow-up study (luursema et al., 2008 found the contribution of computer-implemented stereopsis to this effect to be small but significant. The present experiment investigated the contribution of dynamic exploration to anatomical learning by means of a virtual learning environment. Seventy participants were tested for visuo-spatial ability and were grouped in pairs matched for this ability. One individual of the pair actively manipulated a 3D reconstruction of the human abdomen; the other individual passively watched the interactions of the first individual on a separate screen. Learning was assessed by two anatomical learning tests. Dynamic exploration provided a small but significant benefit to anatomical learning.