WorldWideScience

Sample records for code of practice

  1. Code of Practice

    International Nuclear Information System (INIS)

    Doyle, Colin; Hone, Christopher; Nowlan, N.V.

    1984-05-01

    This Code of Practice introduces accepted safety procedures associated with the use of alpha, beta, gamma and X-radiation in secondary schools (pupils aged 12 to 18) in Ireland, and summarises good practice and procedures as they apply to radiation protection. Typical dose rates at various distances from sealed sources are quoted, and simplified equations are used to demonstrate dose and shielding calculations. The regulatory aspects of radiation protection are outlined, and references to statutory documents are given

  2. Effective enforcement of the forest practices code

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The British Columbia Forest Practices Code establishes a scheme to guide and direct forest harvesting and other forest uses in concert with other related acts. The Code is made up of the Forest Practices Code of British Columbia Act, regulations, standards, and guidebooks. This document provides information on Code enforcement. It reviews the roles of the three provincial resource ministries and the Attorney General in enforcing the code, the various activities undertaken to ensure compliance (including inspections, investigations, and responses to noncompliance), and the role of the public in helping to enforce the Code. The appendix contains a list of Ministry of Forests office locations and telephone numbers.

  3. Code of practice for food handler activities.

    Science.gov (United States)

    Smith, T A; Kanas, R P; McCoubrey, I A; Belton, M E

    2005-08-01

    The food industry regulates various aspects of food handler activities, according to legislation and customer expectations. The purpose of this paper is to provide a code of practice which delineates a set of working standards for food handler hygiene, handwashing, use of protective equipment, wearing of jewellery and body piercing. The code was developed by a working group of occupational physicians with expertise in both food manufacturing and retail, using a risk assessment approach. Views were also obtained from other occupational physicians working within the food industry and the relevant regulatory bodies. The final version of the code (available in full as Supplementary data in Occupational Medicine Online) therefore represents a broad consensus of opinion. The code of practice represents a set of minimum standards for food handler suitability and activities, based on a practical assessment of risk, for application in food businesses. It aims to provide useful working advice to food businesses of all sizes.

  4. Code of practice for ionizing radiation

    International Nuclear Information System (INIS)

    Khoo Boo Huat

    1995-01-01

    Prior to 1984, the use of ionizing radiation in Malaysia was governed by the Radioactive Substances Act of 1968. After 1984, its use came under the control of Act 304, called the Atomic Energy Licensing Act 1984. Under powers vested by the Act, the Radiation Protection (Basic Safety Standards) Regulations 1988 were formulated to regulate its use. These Acts do not provide information on proper working procedures. With the publication of the codes of Practice by The Standards and Industrial Research Institute of Malaysia (SIRIM), the users are now able to follow proper guidelines and use ionizing radiation safely and beneficially. This paper discusses the relevant sections in the following codes: 1. Code of Practice for Radiation Protection (Medical X-ray Diagnosis) MS 838:1983. 2. Code of Practice for Safety in Laboratories Part 4: Ionizing radiation MS 1042: Part 4: 1992. (author)

  5. Code of Practice containing definitions for Safety Codes of Practice for nuclear power plants

    International Nuclear Information System (INIS)

    1979-01-01

    This Code provides definitions of the technical terms used in the licensing applications to be submitted to the Turkish Atomic Energy Commission (TAEC), in accordance with national licensing regulations. The Code is based mainly on the International Atomic Energy Agency's Code of Practice on the subject. (NEA) [fr

  6. AD codes of practice 'pressure vessels'

    International Nuclear Information System (INIS)

    Schefe, G.

    1978-01-01

    Within the AD-Regelwerk, a manual of regulations, the AD codes of practice HP1 and HP20 have been published for the first time. In contrast to the already existing codes of practice of the series HP, these leaflets do not mainly contain changes in the test details and the course of the procedure, but, in a summarized form, that which has been practiced for years. Comments on the new codes concentrate mainly on those things, which are really new, or which might appear to be new. Furthermore, control lists and proposals for printed forms, addressed to designers and supervisors on the side of the manufacturers, are to contribute to the tests being carried out economically. (orig./RW) [de

  7. Code of practice in industrial radiography

    International Nuclear Information System (INIS)

    Karma, S. E. M.

    2010-12-01

    The aim of this research is to developing a draft for a new radiation protection code of practice in industrial radiography without ignoring that one issued in 1998 and meet the current international recommendation. Another aim of this study was to assess the current situation of radiation protection in some of the industrial radiography department in Sudan. To achieve the aims of this study, a draft of a code of practice has been developed which is based on international and local relevant recommendations. The developed code includes the following main issues: regulatory responsibilities, radiation protection program and design of radiation installation. The practical part of this study includes scientific visits to two of industrial radiography departments in Sudan so as to assess the degree of compliance of that department with what state in the developed code. The result of each scientific visits revealed that most of the department do not have an effective radiation protection program and that could lead to exposure workers and public to unnecessary dose. Some recommendations were stated that, if implemented could improve the status of radiation protection in industrial radiography department. (Author)

  8. Food Irradiation Regulations And Code Of Practice

    International Nuclear Information System (INIS)

    Jimba, B.W. Centre For Energy Research And Training, Ahmadu Bello University, Zaria,

    1996-01-01

    Official attitude towards irradiated food is determined by factors such as: level of scientific knowledge, consumer habits, food shortages, agricultural production and technological know-how. To date, 39 countries have accepted the process for one or more food items while 27 nations carry out the process on a commercial basis. Regulations and codes of practice is essential for consumer confidence while uniformity of regulations, at the international level, will enhance international trade in irradiated food items. The internationally accepted Codex Standard on irradiated food and Codes of Practice for the operation of irradiation facilities, adopted in 1983, forms the basis for International regulations and a template for nations in the development of regulations. This paper discusses the basic legal requirements for licensing the process, procedures, facility and the operator and suggests a framework for a national regulation based on experiences of Hungary, Brazil and Israel

  9. Code of practice for clinical proton dosimetry

    International Nuclear Information System (INIS)

    Vynckier, S.

    1991-01-01

    The objective of this document is to make recommendations for the determination of absorbed dose to tissue for clinical proton beams and to achieve uniformity in proton dosimetry. A Code of Practice (CoP) has been chosen, providing specific guidelines for the choice of the detector and the method of determination of absorbed dose for proton beams only. This CoP is confined specifically to the determination of absorbed dose and is not concerned with the biological effects of proton beams. It is recommended that dosimeters be calibrated by comparison with a calorimeter. If this is not available, a Faraday cup, or alter-natively, an ionization chamber, with a 60 Co calibration factor should be used. Physical parameters for determining the dose from tissue-equivalent ionization chamber measurements are given together with a worksheet. It is recommended that calibrations be carried out in water at the centre of the spread-out-Bragg-peak and that dose distributions be measured in a water phantom. It is estimated that the error in the calibrations will be less than +-5 per cent (1 S.D.) in all cases. Adoption and implementation of this CoP will facilitate the exchange of clinical information. (author). 34 refs.; 5 figs.; 5 tabs

  10. The Code of Ethics and Editorial Code of Practice of the Royal Astronomical Society

    Science.gov (United States)

    Murdin, Paul

    2013-01-01

    Whilst the Royal Astronomical Society has got by for more than 100 years without a written code of ethics, modern standards of governance suggested that such a code could be useful in the resolution of disputes. In 2005, the RAS adopted the Universal Code of Ethics for Science that had been formulated by the Royal Society of London. At the same time and for similar reasons the RAS adopted an Editorial Code of Practice.

  11. Code of practice for radiological protection in dentistry

    International Nuclear Information System (INIS)

    1988-01-01

    This Code of Practice applies to all those involved in the practice of dentistry and is designed to minimise radiation doses to patients, dental staff and the public from the use of dental radiographic equipment

  12. Practicing the Code of Ethics, finding the image of God.

    Science.gov (United States)

    Hoglund, Barbara A

    2013-01-01

    The Code of Ethics for Nurses gives a professional obligation to practice in a compassionate and respectful way that is unaffected by the attributes of the patient. This article explores the concept "made in the image of God" and the complexities inherent in caring for those perceived as exhibiting distorted images of God. While the Code provides a professional standard consistent with a biblical worldview, human nature impacts the ability to consistently act congruently with the Code. Strategies and nursing interventions that support development of practice from a biblical worldview and the Code of Ethics for Nurses are presented.

  13. Code of practice for radiation protection in veterinary medicine

    International Nuclear Information System (INIS)

    Duffy, J.; Fenton, D.; McGarry, A.; McAllister, H.; Skelly, C

    2002-11-01

    This Code of Practice updates the Code of Practice on Radiation Protection in Veterinary Radiology prepared by the Nuclear Energy Board in June 1989. The Code is designed to give guidance to veterinary surgeons to ensure that they, their employees and members of the public are adequately protected from the hazards of ionising radiation arising from the use of X-ray equipment and radioactive substances in the practice of veterinary medicine. It reflects the regulations as specified in the Radiological Protection Act, 1991, (Ionising Radiation) Order, 2000 (S.I. No. 125 of 2000)

  14. Characterizing Mathematics Classroom Practice: Impact of Observation and Coding Choices

    Science.gov (United States)

    Ing, Marsha; Webb, Noreen M.

    2012-01-01

    Large-scale observational measures of classroom practice increasingly focus on opportunities for student participation as an indicator of instructional quality. Each observational measure necessitates making design and coding choices on how to best measure student participation. This study investigated variations of coding approaches that may be…

  15. Internal Corrosion Control of Water Supply Systems Code of Practice

    Science.gov (United States)

    This Code of Practice is part of a series of publications by the IWA Specialist Group on Metals and Related Substances in Drinking Water. It complements the following IWA Specialist Group publications: 1. Best Practice Guide on the Control of Lead in Drinking Water 2. Best Prac...

  16. (Almost) practical tree codes

    KAUST Repository

    Khina, Anatoly

    2016-08-15

    We consider the problem of stabilizing an unstable plant driven by bounded noise over a digital noisy communication link, a scenario at the heart of networked control. To stabilize such a plant, one needs real-time encoding and decoding with an error probability profile that decays exponentially with the decoding delay. The works of Schulman and Sahai over the past two decades have developed the notions of tree codes and anytime capacity, and provided the theoretical framework for studying such problems. Nonetheless, there has been little practical progress in this area due to the absence of explicit constructions of tree codes with efficient encoding and decoding algorithms. Recently, linear time-invariant tree codes were proposed to achieve the desired result under maximum-likelihood decoding. In this work, we take one more step towards practicality, by showing that these codes can be efficiently decoded using sequential decoding algorithms, up to some loss in performance (and with some practical complexity caveats). We supplement our theoretical results with numerical simulations that demonstrate the effectiveness of the decoder in a control system setting.

  17. About the Code of Practice of the European Mathematical Society

    DEFF Research Database (Denmark)

    Jensen, Arne

    2013-01-01

    The Executive Committee of the European Mathematical Society created an Ethics Committee in the Spring of 2010. The first task of the Committee was to prepare a Code of Practice. This task was completed in the Spring of 2012 and went into effect on 1 November 2012. Arne Jensen, author...... of this article, is Chair of the EMS Ethics Committee...

  18. Codes of practice and related issues in biomedical waste management

    Energy Technology Data Exchange (ETDEWEB)

    Moy, D.; Watt, C. [Griffith Univ. (Australia)

    1996-12-31

    This paper outlines the development of a National Code of Practice for biomedical waste management in Australia. The 10 key areas addressed by the code are industry mission statement; uniform terms and definitions; community relations - public perceptions and right to know; generation, source separation, and handling; storage requirements; transportation; treatment and disposal; disposal of solid and liquid residues and air emissions; occupational health and safety; staff awareness and education. A comparison with other industry codes in Australia is made. A list of outstanding issues is also provided; these include the development of standard containers, treatment effectiveness, and reusable sharps containers.

  19. Development of a national code of practice for structural masonry ...

    African Journals Online (AJOL)

    The problems and constraints faced by most developing countries, particularly Ghana, in developing codes of practice for structural masonry are highlighted. The steps that must be undertaken through the coordinated efforts of the National Standards Boards, Research Institutions, Universities and Professional Bodies in the ...

  20. Development of a code of practice for deep geothermal wells

    International Nuclear Information System (INIS)

    Leaver, J.D.; Bolton, R.S.; Dench, N.D.; Fooks, L.

    1990-01-01

    Recent and on-going changes to the structure of the New Zealand geothermal industry has shifted responsibility for the development of geothermal resources from central government to private enterprise. The need for a code of practice for deep geothermal wells was identified by the Geothermal Inspectorate of the Ministry of Commerce to maintain adequate standards of health and safety and to assist with industry deregulation. This paper reports that the Code contains details of methods, procedures, formulae and design data necessary to attain those standards, and includes information which drilling engineers having experience only in the oil industry could not be expected to be familiar with

  1. Code of practice : safe use of ionizing radiation

    International Nuclear Information System (INIS)

    1988-07-01

    Ionizing radiation is used extensively in the field of scientific research. The risk of uncontrolled exposure to both the worker and the environment is ever present. The purpose of this Code is to set out practices considered by the CSIRO Health and Safety Committee to be appropriate for CSIRO staff and, if followed, they will result in appropriate protection for research staff and the environment. The Code does not cover sources of non-ionizing radiation such as microwave ovens, RF generators and laser sources

  2. Beyond a code of ethics: phenomenological ethics for everyday practice.

    Science.gov (United States)

    Greenfield, Bruce; Jensen, Gail M

    2010-06-01

    Physical therapy, like all health-care professions, governs itself through a code of ethics that defines its obligations of professional behaviours. The code of ethics provides professions with a consistent and common moral language and principled guidelines for ethical actions. Yet, and as argued in this paper, professional codes of ethics have limits applied to ethical decision-making in the presence of ethical dilemmas. Part of the limitations of the codes of ethics is that there is no particular hierarchy of principles that govern in all situations. Instead, the exigencies of clinical practice, the particularities of individual patient's illness experiences and the transformative nature of chronic illnesses and disabilities often obscure the ethical concerns and issues embedded in concrete situations. Consistent with models of expert practice, and with contemporary models of patient-centred care, we advocate and describe in this paper a type of interpretative and narrative approach to moral practice and ethical decision-making based on phenomenology. The tools of phenomenology that are well defined in research are applied and examined in a case that illustrates their use in uncovering the values and ethical concerns of a patient. Based on the deconstruction of this case on a phenomenologist approach, we illustrate how such approaches for ethical understanding can help assist clinicians and educators in applying principles within the context and needs of each patient. (c) 2010 John Wiley & Sons, Ltd.

  3. Code of practice of radiation protection in fixed nuclear gauges

    International Nuclear Information System (INIS)

    Eltayeb, M. A. M.

    2012-09-01

    The present work aims at developing and updating a code of practice of radiation protection in fixed nuclear gauges that comply with current international recommendations. The work also intended to evaluate the current radiation protection situation in two selected companies using nuclear gauges in Sudan. A draft of the code is proposed which includes the basic principle of protection such as source construction and gauges radiation monitoring, storage maintenance and leak testing as well as specific issues related to nuclear gauges. The practical part of this study included investigation of radiation protection in the comparisons using nuclear gauges for level detection, to evaluate the level of radiation protection and the compliance to the regulatory authority regulations. The result revealed that the two companies do not have an effective radiation protection program and that can lead to exposure of workers to unnecessary doses. Some recommendations were stated, if implemented they could improve the status of radiation protection in those companies. (Author)

  4. Ethical codes in business practice

    OpenAIRE

    Kobrlová, Marie

    2013-01-01

    The diploma thesis discusses the issues of ethics and codes of ethics in business. The theoretical part defines basic concepts of ethics, presents its historical development and the methods and tools of business ethics. It also focuses on ethical codes and the area of law and ethics. The practical part consists of a quantitative survey, which provides views of selected business entities of business ethics and the use of codes of ethics in practice.

  5. Safety in nuclear power plant siting. A code of practice

    International Nuclear Information System (INIS)

    1978-01-01

    This publication is brought out within the framework of establishing Codes of Practice and Safety Guides for nuclear power plants: NUSS programme. The scope of the document encompasses site and site-plant interaction factors related to operational states and accident conditions. The purpose of the Code is to give criteria and procedures to be applied as appropriate to operational states and accident conditions, including those which could lead to emergency situations. This Code is mainly concerned with severe events of low probability which relate to the siting of nuclear power plants and have to be considered in designing a particular nuclear power plant. Annex: Examples of natural and man-made events relevant for design basis evaluation

  6. The use of diagnostic coding in chiropractic practice

    DEFF Research Database (Denmark)

    Testern, Cecilie D; Hestbæk, Lise; French, Simon D

    2015-01-01

    BACKGROUND: Diagnostic coding has several potential benefits, including improving the feasibility of data collection for research and clinical audits and providing a common language to improve interdisciplinary collaboration. The primary aim of this study was to determine the views and perspectives......-2 PLUS) provided the 14 chiropractors with some experience in diagnostic coding, followed by an interview on the topic. The interviews were analysed thematically. The participating chiropractors and an independent coder applied ICPC-2 PLUS terms to the diagnoses of 10 patients. Then the level...... of agreement between the chiropractors and the coder was determined and Cohen's Kappa was used to determine the agreement beyond that expected by chance. RESULTS: From the interviews the three emerging themes were: 1) Advantages and disadvantages of using a clinical coding system in chiropractic practice, 2...

  7. Health physics source document for codes of practice

    International Nuclear Information System (INIS)

    Pearson, G.W.; Meggitt, G.C.

    1989-05-01

    Personnel preparing codes of practice often require basic Health Physics information or advice relating to radiological protection problems and this document is written primarily to supply such information. Certain technical terms used in the text are explained in the extensive glossary. Due to the pace of change in the field of radiological protection it is difficult to produce an up-to-date document. This document was compiled during 1988 however, and therefore contains the principle changes brought about by the introduction of the Ionising Radiations Regulations (1985). The paper covers the nature of ionising radiation, its biological effects and the principles of control. It is hoped that the document will provide a useful source of information for both codes of practice and wider areas and stimulate readers to study radiological protection issues in greater depth. (author)

  8. Code of practice for radiation protection in dentistry (1987)

    International Nuclear Information System (INIS)

    1988-01-01

    This code is intended as a guide to safe practices and lays down detailed requirements for the following protective measures : allocation of responsibility and need for clinical assessment of the indications for radiography; provision of appropriate equipment, film and processing facilities; adoption of procedures to minimise exposure to radiation. This code deals with radiographic procedures commonly used in general and specialist dental practice. These entail : intra-oral radiography: periapical, bitewing and occlusal views; panoramic radiography: intra-oral tube radiography and panoramic tomography; radiography of the complete skull or certain parts of the dento-maxillo-facial region; hand and wrist radiography for the sole purpose of the determination of the bone age

  9. Does a code make a difference – assessing the English code of practice on international recruitment

    Directory of Open Access Journals (Sweden)

    Mensah Kwadwo

    2009-04-01

    Full Text Available Abstract Background This paper draws from research completed in 2007 to assess the effect of the Department of Health, England, Code of Practice for the international recruitment of health professionals. The Department of Health in England introduced a Code of Practice for international recruitment for National Health Service employers in 2001. The Code required National Health Service employers not to actively recruit from low-income countries, unless there was government-to-government agreement. The Code was updated in 2004. Methods The paper examines trends in inflow of health professionals to the United Kingdom from other countries, using professional registration data and data on applications for work permits. The paper also provides more detailed information from two country case studies in Ghana and Kenya. Results Available data show a considerable reduction in inflow of health professionals, from the peak years up to 2002 (for nurses and 2004 (for doctors. There are multiple causes for this decline, including declining demand in the United Kingdom. In Ghana and Kenya it was found that active recruitment was perceived to have reduced significantly from the United Kingdom, but it is not clear the extent to which the Code was influential in this, or whether other factors such as a lack of vacancies in the United Kingdom explains it. Conclusion Active international recruitment of health professionals was an explicit policy intervention by the Department of Health in England, as one key element in achieving rapid staffing growth, particularly in the period 2000 to 2005, but the level of international recruitment has dropped significantly since early 2006. Regulatory and education changes in the United Kingdom in recent years have also made international entry more difficult. The potential to assess the effect of the Code in England is constrained by the limitations in available databases. This is a crucial lesson for those considering a

  10. Code of practice against radiation hazards at PINSTECH

    International Nuclear Information System (INIS)

    Mubarak, M.A.; Javed, M.; Ahmad, S.

    1982-10-01

    It is the radiation safety policy of PAEC/PINSTECH that all radiation exposure should be kept as low as reasonably achievable (ALARA). A code of practice against radiation hazards at PINSTECH was written in 1972 which regulated the conduct of radiation work at PINSTECH. Since the radiation work at PINSTECH has greatly increased, it was considered necessary to revise the code so as to incorporate the new concepts in this field as well as to help meet the present requirements of radiation protection. The procedures set forth in this code are mandatory and in no case should any of them be deviated except under an emergency situation which may be handled according to procedures laid down in a separate manual ''Emergency Procedures at PARR-PINSTECH'' (PINSTECH/HP--19). All those supervising or performing any kind of radiation work are required to study and adhere to these procedures. Copy of this code should be kept in every radiation laboratory for ready reference. (author)

  11. The Usage of 2D Codes in Marketing Practices

    Directory of Open Access Journals (Sweden)

    Toni Podmanicki

    2011-07-01

    Full Text Available Barcodes, which are used for the labelling and identification of products, have been used as the foundation for the development of new symbols, two-dimensional barcodes (usually called 2D codes. These codes are capable of receiving large amounts of data in a small area, and data stored in them can be read by means of mobile devices. They usually contain information such as web addresses, text, contacts and similar data that encourage users to interact in order to obtain the desired information, entertainment, discount, reservation, and even do their shopping. The possibility of connecting the physical and digital world by means of 2D codes has led marketing professionals to face new challenges in the development of strategies in mobile marketing. Many companies recognized the potential of the above technology very early, in its initial phase, and they use it now in their activities. This paper aims to emphasize the importance of knowing this technology and its advantages by providing examples in marketing practices.

  12. Code of practice for radiation protection in nuclear medicine

    International Nuclear Information System (INIS)

    Hamed, M. I.

    2010-05-01

    In aim of this study was to develop a draft for a new code practice for radiation protection in nuclear medicine that meets the current relevant international recommendation. The draft includes the following main fields: methods of radiation protection for workers, patients and public. Also, the principles of safe design of nuclear medicine departments, quality assurance program, proper manipulation of radiation sources including radioactive waste and emergency preparedness and response. The practical part of this study includes inspections of three nuclear medicine departments available in Sudan so as to assess the degree of compliance of those departments with what is stated in this code. The inspection missions have been conducted using a checklist that addresses all items that may affect radiation raincoat issues in addition to per formin area radiation monitoring around the installation of the radioactive sources. The results of this revealed that most of the departments do not have effective radiation protection program which in turn could lead to unnecessary exposure to patients, public and workers. Finally, some recommendations are given that - if implemented - could improve the status of radiation protection in nuclear medicine department. (Author)

  13. Evaluation of practicality of ASME code, Section XI

    International Nuclear Information System (INIS)

    Mattu, R.K.; Lauderdale, J.R.; Liu, S.N.; Lance, J.J.

    2004-01-01

    Many nuclear power plants have found that it is impractical or unduly burdensome to comply with some ASME Boiler and Pressure Code provisions and have sought relief from those provisions from the Nuclear Regulatory Commission. An Electric Power Research Institute (EPRI) project is evaluating such Code provisions and alternatives to them that will meet the safety intent of the Code with less burden on utilities. The methodology is to extract data from an on-line data base of relief requests since 1980, analyse the data to identify burdensome provisions for which there are satisfactory alternatives, and recommend changes in the Code to the ASME. (author)

  14. Codes of medical ethics: traditional foundations and contemporary practice.

    Science.gov (United States)

    Sohl, P; Bassford, H A

    1986-01-01

    The Hippocratic Coprus recognized the interaction of 'business' and patient-health moral considerations, and urged that the former be subordinated to the latter. During the 1800s with the growth of complexity in both scientific knowledge and the organization of health services, the medical ethical codes addressed themselves to elaborate rules of conduct to be followed by the members of the newly emerging national medical associations. After World War II the World Medical Association was established as an international forum where national medical associations could debate the ethical problems presented by modern medicine. The International Code of Medical ethics and the Declaration of Geneva were written as 20th century restatements of the medical profession's commitment to the sovereignty of the patient-care norm. Many ethical statements have been issued by the World Medical Association in the past 35 years; they show the variety and difficulties of contemporary medical practice. The newest revisions were approved by the General Assembly of the World Medical Association in Venice, Italy October 1983. Their content is examined and concern is voiced about the danger of falling into cultural relativism when questions about the methods of financing medical services are the subject of an ethical declaration which is arrived at by consensus in the W.M.A.

  15. Radiation protection code of practice in academic and research institutes

    International Nuclear Information System (INIS)

    Abdalla, A. A. M.

    2010-05-01

    The main aim of this study was to establish a code of practice on radiation protection for safe control of radiation sources used in academic and research institutes, another aim of this study was to assess the current situation of radiation protection in some of the academic and research institutes.To achieve the aims of this study, a draft of a code of practice has been developed which is based on international and local relevant recommendation. The developed code includes the following main issues: regulatory responsibilities, radiation protection program and design of radiation installations. The second aim had been accomplished by conducting inspection visits to five (A, B, C, D and E) academic and to four (F, G, H and I ) research institutes. Eight of such institutes are located in Khartoum State and the ninth one is in Madani city (Aljazeera State). The inspection activities have been carried out using a standard inspection check list developed by the regulatory authority of the Sudan. The inspection missions to the above mentioned institutes involved also evaluation of radiation levels around the premises and storage areas of radiation sources. The dose rate measurement around radiation sources locations were found to be quite low. This mainly is due to the fact that the activities of most radionuclides that are used in these institutes are quite low ( in the range of micro curies). Also ,most the x-ray machines that were found in use for scientific academic and research purposes work at low k Vp of maximum 60 k Vp. None of the radiation workers in the inspected institutes has a personal radiation monitoring device, therefor staff dose levels have not been assessed. However it was noted that in most of the academic/ research studies radiation workers are only exposed to very low levels of radiation and for a very short time that dose not exceed 1 minute, therefore the expected occupational exposure of the staff is very low. Radiation measurement in public

  16. Code of practice for safety in laboratory - non ionising radiation

    International Nuclear Information System (INIS)

    Ramli Jaya; Mohd Yusof Mohd Ali; Khoo Boo Huat; Khatijah Hashim

    1995-01-01

    The code identifies the non-ionizing radiation encountered in laboratories and the associated hazards. The code is intended as a laboratory standard reference document for general information on safety requirements relating to the usage of non-ionizing radiations in laboratories. The nonionizing radiations cover in this code, namely, are ultraviolet radiation, visible light, radio-frequency radiation, lasers, sound waves and ultrasonic radiation. (author)

  17. Automatic code generation in practice

    DEFF Research Database (Denmark)

    Adam, Marian Sorin; Kuhrmann, Marco; Schultz, Ulrik Pagh

    2016-01-01

    -specific language to specify those requirements and to allow for generating a safety-enforcing layer of code, which is deployed to the robot. The paper at hand reports experiences in practically applying code generation to mobile robots. For two cases, we discuss how we addressed challenges, e.g., regarding weaving......Mobile robots often use a distributed architecture in which software components are deployed to heterogeneous hardware modules. Ensuring the consistency with the designed architecture is a complex task, notably if functional safety requirements have to be fulfilled. We propose to use a domain...... code generation into proprietary development environments and testing of manually written code. We find that a DSL based on the same conceptual model can be used across different kinds of hardware modules, but a significant adaptation effort is required in practical scenarios involving different kinds...

  18. The radiation protection code of practice in teletherapy facilities

    International Nuclear Information System (INIS)

    Fadlalla, N. S. M.

    2010-05-01

    This study aimed to provide a document (code) for the standard practice in teletherapy facilities to be a reference and guide for establishing new teletherapy facilities or mending an existing one, another aim was to evaluated the teletherapy facilities with regard to their compliance to the recommendations and guides mentioned in this document. This document includes: safety specifications for teletherapy equipment, facility planning and shielding design, radiation protection and work practice, quality assurance and personnel requirements and responsibilities. In order to assess the degree of compliance of the two centers in the country with what was stated in the developed document IAEA inspection checklist was utilized and made some radiation measurement were made around the treatment rooms. The results of such inspection mission revealed that the current status of radiation protection in both of inspected centers is almost similar and both are not satisfactory as many of the essential items of radiation protection as stipulated in this document were not followed, which lead to unnecessary, radiation exposure to patients and staff. Finally, some recommendations that may help to improve the status of radiation protection in radiotherapy departments in Sudan are given. (Author)

  19. Practical Design of Delta-Sigma Multiple Description Audio Coding

    DEFF Research Database (Denmark)

    Leegaard, Jack Højholt; Østergaard, Jan; Jensen, Søren Holdt

    2014-01-01

    It was recently shown that delta-sigma quantization (DSQ) can be used for optimal multiple description (MD) coding of Gaussian sources. The DSQ scheme combined oversampling, prediction, and noise-shaping in order to trade off side distortion for central distortion in MD coding. It was shown that ...

  20. Code of Practice on the International Transboundary Movement of Radioactive Waste

    International Nuclear Information System (INIS)

    1990-11-01

    On 21 September 1990, the General Conference, by resolution GC(XXXIV)/RES/530, adopted a Code of Practice on the International Transboundary Movement of Radioactive Waste and requested the Director General - inter alia - to take all necessary steps to ensure wide dissemination of the Code of Practice at both the national and the international level. The Code of Practice was elaborated by a Group of Experts established pursuant to resolution GC(XXXII)/RES/490 adopted by the General Conference in 1988. The text of the Code of Practice is reproduced herewith for the information of all Member States

  1. Code of Practice on the International Transboundary Movement of Radioactive Waste

    International Nuclear Information System (INIS)

    1990-01-01

    On 21 September 1990, the General Conference, by resolution GC(XXXIV)/RES/530, adopted a Code of Practice on the International Transboundary Movement of Radioactive Waste and requested the Director General - inter alia - to take all necessary steps to ensure wide dissemination of the Code of Practice at both the national and the international level. The Code of Practice was elaborated by a Group of Experts established pursuant to resolution GC(XXXII)/RES/490 adopted by the General Conference in 1988. The text of the Code of Practice is reproduced herewith for the information of all Member States [fr

  2. Code of Practice on the International Transboundary Movement of Radioactive Waste

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-11-14

    On 21 September 1990, the General Conference, by resolution GC(XXXIV)/RES/530, adopted a Code of Practice on the International Transboundary Movement of Radioactive Waste and requested the Director General - inter alia - to take all necessary steps to ensure wide dissemination of the Code of Practice at both the national and the international level. The Code of Practice was elaborated by a Group of Experts established pursuant to resolution GC(XXXII)/RES/490 adopted by the General Conference in 1988. The text of the Code of Practice is reproduced herewith for the information of all Member States.

  3. Code of Practice on the International Transboundary Movement of Radioactive Waste

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-11-15

    On 21 September 1990, the General Conference, by resolution GC(XXXIV)/RES/530, adopted a Code of Practice on the International Transboundary Movement of Radioactive Waste and requested the Director General - inter alia - to take all necessary steps to ensure wide dissemination of the Code of Practice at both the national and the international level. The Code of Practice was elaborated by a Group of Experts established pursuant to resolution GC(XXXII)/RES/490 adopted by the General Conference in 1988. The text of the Code of Practice is reproduced herewith for the information of all Member States.

  4. Code of Practice on the International Transboundary Movement of Radioactive Waste

    International Nuclear Information System (INIS)

    1990-01-01

    On 21 September 1990, the General Conference, by resolution GC(XXXIV)/RES/530, adopted a Code of Practice on the International Transboundary Movement of Radioactive Waste and requested the Director General - inter alia - to take all necessary steps to ensure wide dissemination of the Code of Practice at both the national and the international level. The Code of Practice was elaborated by a Group of Experts established pursuant to resolution GC(XXXII)/RES/490 adopted by the General Conference in 1988. The text of the Code of Practice is reproduced herewith for the information of all Member States

  5. Disposal of Pesticide Wastes as Implemented in A Proposed Code of Practice in Egypt

    International Nuclear Information System (INIS)

    Sherif El-Hamady, E.

    1999-01-01

    In the present study , an Egyptian Code of Practice for the safe use of pesticides on farms and holdings is suggested. The Code has to be issued for the purpose of providing practical guidance to citizens especially farmers and growers engaged in crop production or to the authorities of companies and plants manufacturing and formulating pesticides in Egypt

  6. Development of standards, codes of practice and guidelines at the national level

    International Nuclear Information System (INIS)

    Swindon, T.N.

    1989-01-01

    Standards, codes of practice and guidelines are defined and their different roles in radiation protection specified. The work of the major bodies that develop such documents in Australia - the National Health and Medical Research Council and the Standards Association of Australia - is discussed. The codes of practice prepared under the Environment Protection (Nuclear Codes) Act, 1978, an act of the Australian Federal Parliament, are described and the guidelines associated with them outlined. 5 refs

  7. The Interplay Between the Unfair Commercial Practices Directive and Codes of Conduct

    NARCIS (Netherlands)

    Charlotte Pavillon (C.M.D.S.)

    2013-01-01

    markdownabstract__Abstract__ At the heart of this paper lies the reciprocal influence between codes of conduct and the Unfair Commercial Practices Directive (UCPD). It assesses to what extent self-regulatory practice both affects and is affected by the directive. The codes' contribution to

  8. QR CODE IN LIBRARY PRACTICE SOME EXAMPLES

    OpenAIRE

    Ajay Shanker Mishra*, Sachin Kumar Umre, Pavan Kumar Gupta

    2017-01-01

    Quick Response (QR) code is one such technology which can cater to the user demand of providing access to resources through mobile. The main objective of this article to review the concept of Quick Response Code (QR code) and describe the practice of reading and generating QR codes. Research paper attempt to the basic concept, structure, technological pros and cons of the QR code. The literature is filled with potential uses for Quick Response (QR) codes in the library practices like e-resour...

  9. Practical Application of Monte Carlo Code in RTP

    International Nuclear Information System (INIS)

    Mohamad Hairie Rabir; Julia Abdul Karim; Muhammad Rawi Mohamed Zin; Na'im Syauqi Hamzah; Mark Dennis Anak Usang; Abi Muttaqin Jalal Bayar; Muhammad Khairul Ariff Mustafa

    2015-01-01

    Monte Carlo neutron transport codes are widely used in various reactor physics applications in RTP and other related nuclear and radiation research in Nuklear Malaysia. The main advantage of the method is the capability to model geometry and interaction physics without major approximations. The disadvantage is that the modelling of complicated systems is very computing-intensive, which restricts the applications to some extent. The importance of Monte Carlo calculation is likely to increase in the future, along with the development in computer capacities and parallel calculation. This paper presents several calculation activities, its achievements and challenges in using MCNP code for neutronics analysis, nuclide inventory and source term calculation, shielding and dose evaluation. (author)

  10. Passport of global nuclear business. ASME code certificate acquirement and inspection practices

    International Nuclear Information System (INIS)

    Kawabata, Hiroyuki; Terajima, Makoto; Anami, Kazuhiro

    2010-01-01

    There are possibilities of Japanese nuclear industries to participate in global business such as new and additional construction of nuclear power plants in US and also Asian and other developing countries in the world. It is requisite to acquire ASME code certificate for global business participation, just as passport. This article consists of five papers on present status of ASME code certificate acquirement and inspection practices of nuclear components vendors in the area of Japanese nuclear business. Activities of JSME Committee on Power Generation Facility Codes to make JSME codes corresponded to ASME nuclear codes and standards for their international deployment are also described. (T. Tanaka)

  11. Code of practice on radiation protection in the mining and milling of radioactive ores 1987

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    This Code was formulated under provisions of the Environment Protection (Nuclear Codes) Act 1978 in close consultation with the Governments of the States and the Northern Territory. It is a major revision of the Code of Practice on Radiation Protection in the Mining and Milling of Radioactive Ores (1980), incorporating changes flowing from advances in internationally agreed radiation protection philosophy, and experience gained in Australia in uranium mining and milling operations and the extraction of monazite from mineral sands. The Code specifies the standards, practices, procedures, and measures to prevent or limit risk to employees and to the public from uranium mining and milling, mineral sands operations and extraction of radioactive ores. To assist the industry in meeting the requirements and responsibilities imposed by the Code, guidelines to the former Code will be reviewed and, if appropriate, revised. New guidelines to assist compliance with changed requirements will also be prepared. The Act provides for the revision of codes of practice. The Code of Practice on Radiation Protection in the Mining and Milling of Radioactive Ores (1987) will be reviewed from time to time and revised if necessary to ensure that the highest standards of radiation protection in the mining and milling of radioactive ores are maintained.

  12. Code of practice on radiation protection in the mining and milling of radioactive ores 1987

    International Nuclear Information System (INIS)

    1987-01-01

    This Code was formulated under provisions of the Environment Protection (Nuclear Codes) Act 1978 in close consultation with the Governments of the States and the Northern Territory. It is a major revision of the Code of Practice on Radiation Protection in the Mining and Milling of Radioactive Ores (1980), incorporating changes flowing from advances in internationally agreed radiation protection philosophy, and experience gained in Australia in uranium mining and milling operations and the extraction of monazite from mineral sands. The Code specifies the standards, practices, procedures, and measures to prevent or limit risk to employees and to the public from uranium mining and milling, mineral sands operations and extraction of radioactive ores. To assist the industry in meeting the requirements and responsibilities imposed by the Code, guidelines to the former Code will be reviewed and, if appropriate, revised. New guidelines to assist compliance with changed requirements will also be prepared. The Act provides for the revision of codes of practice. The Code of Practice on Radiation Protection in the Mining and Milling of Radioactive Ores (1987) will be reviewed from time to time and revised if necessary to ensure that the highest standards of radiation protection in the mining and milling of radioactive ores are maintained

  13. Code of practice for the safe use of ionizing radiation in secondary schools (1986)

    International Nuclear Information System (INIS)

    1987-01-01

    The code of practice is intended for schools and indicates the basic philosophy behind the current approach to the control of hazards associated with the use of ionizing radiation. The purpose of this code is to provide guidance on safe and proper practices in the use of radiation. It covers modes of radiation exposure, shielding, dose limits, responsibility, general rules, x-ray generators, general control of radioactive sources, sealed sources and unsealed sources

  14. Environmental codes of practice for steam electric power generation

    International Nuclear Information System (INIS)

    1985-03-01

    The Design Phase Code is one of a series of documents being developed for the steam electric power generation industry. This industry includes fossil-fuelled stations (gas, oil and coal-fired boilers), and nuclear-powered stations (CANDU heavy water reactors). In this document, environmental concerns associated with water-related and solid waste activities of steam electric plants are discussed. Design recommendations are presented that will minimize the detrimental environmental effects of once-through cooling water systems, of wastewaters discharged to surface waters and groundwaters, and of solid waste disposal sites. Recommendations are also presented for the design of water-related monitoring systems and programs. Cost estimates associated with the implementation of these recommendations are included. These technical guides for new or modified steam electric stations are the result to consultation with a federal-provincial-industry task force

  15. Implementing the Netherlands Code of Conduct for Scientific Practice : A Case Study

    NARCIS (Netherlands)

    Schuurbiers, D.; Osseweijer, P.; Kinderlerer, J.

    2009-01-01

    Widespread enthusiasm for establishing scientific codes of conduct notwithstanding, the utility of such codes in influencing scientific practice is not self-evident. It largely depends on the implementation phase following their establishment—a phase which often receives little attention. The aim of

  16. Impact of Network Coding on Delay and Throughput in Practical Wireless Chain Topologies

    DEFF Research Database (Denmark)

    Hundebøll, Martin; Rein, Stephan Alexander; Fitzek, Frank

    2013-01-01

    In this paper, we present results from a practical evaluation of network coding in a setup consisting of eight nodes deployed in a chain topology. With the tradition pure relaying, delay increases dramatically as the network gets congested, and here network coding helps to moderate this increase ...

  17. Code of Nursing Practice for Staff Exposed to Ionizing Radiation (1984)

    International Nuclear Information System (INIS)

    1984-01-01

    This Code, published by the National Health and Medical Research Council and intended for nurses and auxiliary staff provides general guidance on radiation protection. The Code is supplementary to radiation control legislation relating to the use of ionizing radiation in medical practice. The principles established by the recommendations of the International Commission on Radiological Protection (ICRP) have been taken into account. (NEA) [fr

  18. (Almost) practical tree codes

    KAUST Repository

    Khina, Anatoly; Halbawi, Wael; Hassibi, Babak

    2016-01-01

    We consider the problem of stabilizing an unstable plant driven by bounded noise over a digital noisy communication link, a scenario at the heart of networked control. To stabilize such a plant, one needs real-time encoding and decoding

  19. Code of practice for the safe use of industrial radiography equipment (1989)

    International Nuclear Information System (INIS)

    1989-12-01

    This code supersedes the Code of Practice for the control and safe handling of sealed radioactive sources use din industrial radiography, published by the National Health and Medical Research Council (NHMRC) in 1968. It differs significantly from the former code because radiation protection practice and recommended standards have changed. The code covers the design, construction and requirements for the safe use of X-radiography equipment and gamma-radiography equipment. It provides illustrative working rules, detailed emergency procedures and comprehensive responsibilities and duties for all personnel involved in supplying and using industrial radiography equipment. The code details those equipment requirements, personnel requirements and work practices that the NHMRC considers necessary to keep exposures to ionizing radiation as low as reasonably achievable. Some equipment and facilities currently in use may not meet all of the mandatory requirements of this code. These requirements have been included in the code to encourage progress towards future compliance in the expectation that, in the interim, statutory authorities will apply them with discretion. 9 refs., tabs., ills

  20. Code of practice for the safe use of industrial radiography equipment (1989)

    International Nuclear Information System (INIS)

    1989-12-01

    This code supersedes the Code of practice for the control and safe handling of sealed radioactive sources used in industrial radiography, published by the National Health and Medical Research Council (NHMRC) in 1968. It differs significantly from the former code because radiation protection practice and recommended standards have changed. The code covers the design, construction and requirements for the safe use of X-radiography equipment and gamma-radiography equipment. It provides illustrative working rules, detailed emergency procedures and comprehensive responsibilities and duties for all personnel involved in supplying and using industrial radiography equipment. The code details those equipment requirements, personnel requirements and work practices that the NHMRC considers necessary to keep exposures to ionizing radiation as low as reasonably achievable. Some equipment and facilities currently in use may not meet all of the mandatory requirements of this code. These requirements have been included in the code to encourage progress towards future compliance in the expectation that, in the interim, statutory authorities will apply them with discretion

  1. Safe operation of research reactors and critical assemblies. Code of practice and annexes. 1984 ed

    International Nuclear Information System (INIS)

    1984-01-01

    The safe operation of research reactors and critical assemblies (hereafter termed 'reactors') requires proper design, construction, management and supervision. This Code of Practice deals mainly with management and supervision. The provisions of the Code apply to the whole life of the reactor, including modification, updating and upgrading. The Code may be subject to revision in the light of experience and the state of technology. The Code is aimed at defining minimum requirements for the safe operation of reactors. Emphasis is placed on which safety requirements should be met rather than on specifying how these requirements may be met. The Code also provides guidance and information to persons and authorities responsible for the operation of reactors. The Code recommends that documents dealing with the operation of reactors and including safety analyses be prepared and submitted for review and approval to a regulatory body. Operation would be authorized on the understanding that it would comply with limits and conditions designed to ensure safety. The Code covers a wide range of reactor types, which gives rise to a variety of safety issues. Safety issues applicable to specific reactor types only (e.g. fast reactors) are not necessarily covered in this Code. Some of the recommendations in the Code are not directly applicable to critical assemblies. A recommendation may therefore be interpreted according to the type of reactor concerned. In such cases the words 'adequate' and 'appropriate' are used to mean 'adequate' or 'appropriate' for the type of reactor under consideration.

  2. A qualitative study of DRG coding practice in hospitals under the Thai Universal Coverage Scheme

    Directory of Open Access Journals (Sweden)

    Winch Peter J

    2011-04-01

    Full Text Available Abstract Background In the Thai Universal Coverage health insurance scheme, hospital providers are paid for their inpatient care using Diagnosis Related Group-based retrospective payment, for which quality of the diagnosis and procedure codes is crucial. However, there has been limited understandings on which health care professions are involved and how the diagnosis and procedure coding is actually done within hospital settings. The objective of this study is to detail hospital coding structure and process, and to describe the roles of key hospital staff, and other related internal dynamics in Thai hospitals that affect quality of data submitted for inpatient care reimbursement. Methods Research involved qualitative semi-structured interview with 43 participants at 10 hospitals chosen to represent a range of hospital sizes (small/medium/large, location (urban/rural, and type (public/private. Results Hospital Coding Practice has structural and process components. While the structural component includes human resources, hospital committee, and information technology infrastructure, the process component comprises all activities from patient discharge to submission of the diagnosis and procedure codes. At least eight health care professional disciplines are involved in the coding process which comprises seven major steps, each of which involves different hospital staff: 1 Discharge Summarization, 2 Completeness Checking, 3 Diagnosis and Procedure Coding, 4 Code Checking, 5 Relative Weight Challenging, 6 Coding Report, and 7 Internal Audit. The hospital coding practice can be affected by at least five main factors: 1 Internal Dynamics, 2 Management Context, 3 Financial Dependency, 4 Resource and Capacity, and 5 External Factors. Conclusions Hospital coding practice comprises both structural and process components, involves many health care professional disciplines, and is greatly varied across hospitals as a result of five main factors.

  3. A qualitative study of DRG coding practice in hospitals under the Thai Universal Coverage scheme.

    Science.gov (United States)

    Pongpirul, Krit; Walker, Damian G; Winch, Peter J; Robinson, Courtland

    2011-04-08

    In the Thai Universal Coverage health insurance scheme, hospital providers are paid for their inpatient care using Diagnosis Related Group-based retrospective payment, for which quality of the diagnosis and procedure codes is crucial. However, there has been limited understandings on which health care professions are involved and how the diagnosis and procedure coding is actually done within hospital settings. The objective of this study is to detail hospital coding structure and process, and to describe the roles of key hospital staff, and other related internal dynamics in Thai hospitals that affect quality of data submitted for inpatient care reimbursement. Research involved qualitative semi-structured interview with 43 participants at 10 hospitals chosen to represent a range of hospital sizes (small/medium/large), location (urban/rural), and type (public/private). Hospital Coding Practice has structural and process components. While the structural component includes human resources, hospital committee, and information technology infrastructure, the process component comprises all activities from patient discharge to submission of the diagnosis and procedure codes. At least eight health care professional disciplines are involved in the coding process which comprises seven major steps, each of which involves different hospital staff: 1) Discharge Summarization, 2) Completeness Checking, 3) Diagnosis and Procedure Coding, 4) Code Checking, 5) Relative Weight Challenging, 6) Coding Report, and 7) Internal Audit. The hospital coding practice can be affected by at least five main factors: 1) Internal Dynamics, 2) Management Context, 3) Financial Dependency, 4) Resource and Capacity, and 5) External Factors. Hospital coding practice comprises both structural and process components, involves many health care professional disciplines, and is greatly varied across hospitals as a result of five main factors.

  4. Code of safe practice for the use of x-rays in dentistry

    International Nuclear Information System (INIS)

    1991-06-01

    The purpose of this Code of Safe Practice for the Use of X-rays in Dentistry is to provide criteria for working procedures, x-ray equipment and protective materials necessary for the use of x-rays in dental diagnosis according to currently accepted standards of safety. Conformity with this code may be taken as a primary indication of compliance with radiation protection legislation. 7 refs., 1 ill

  5. Code of Sustainable Practice in Occupational and Environmental Health and Safety for Corporations.

    Science.gov (United States)

    Castleman, Barry; Allen, Barbara; Barca, Stefania; Bohme, Susanna Rankin; Henry, Emmanuel; Kaur, Amarjit; Massard-Guilbaud, Genvieve; Melling, Joseph; Menendez-Navarro, Alfredo; Renfrew, Daniel; Santiago, Myrna; Sellers, Christopher; Tweedale, Geoffrey; Zalik, Anna; Zavestoski, Stephen

    2008-01-01

    At a conference held at Stony Brook University in December 2007, "Dangerous Trade: Histories of Industrial Hazard across a Globalizing World," participants endorsed a Code of Sustainable Practice in Occupational and Environmental Health and Safety for Corporations. The Code outlines practices that would ensure corporations enact the highest health and environmentally protective measures in all the locations in which they operate. Corporations should observe international guidelines on occupational exposure to air contaminants, plant safety, air and water pollutant releases, hazardous waste disposal practices, remediation of polluted sites, public disclosure of toxic releases, product hazard labeling, sale of products for specific uses, storage and transport of toxic intermediates and products, corporate safety and health auditing, and corporate environmental auditing. Protective measures in all locations should be consonant with the most protective measures applied anywhere in the world, and should apply to the corporations' subsidiaries, contractors, suppliers, distributors, and licensees of technology. Key words: corporations, sustainability, environmental protection, occupational health, code of practice.

  6. IAEA provisional code of practice on management of radioactive waste from nuclear power plants

    International Nuclear Information System (INIS)

    1982-10-01

    This Code of Practice defines the minimum requirements for operations and design of structures, systems and components important for management of wastes from thermal nuclear power plants. It emphasizes what safety requirements shall be met rather than specifies how these requirements can be met; the latter aspect is covered in Safety Guides. The Code defines the need for a Government to assume responsibility for regulating waste management practices in conjunction with the regulation of a nuclear power plant. The Code does not prejudge the organization of the regulatory authority, which may differ from one Member State to another, and may involve more than one body. Similarly, the Code does not deal specifically with the functions of a regulatory authority responsible for such matters, although it may be of value to Member States in providing a basis for consideration of such functions. The Code deals with the entire management system for all wastes from nuclear power plants embodying thermal reactors including PWR, BWR, HWR and HTGR technologies. Topics included are: design, normal and abnormal operation, and regulation of management systems for gaseous, liquid and solid wastes, including decommissioning wastes. The Code includes measures to be taken with regard to the wastes arising from spent fuel management at nuclear power plants. However, the options for further management of spent fuel are only outlined since it is the subject of decisions by individual Member States. The Code does not require that an option(s) be decided upon prior to construction or operation of a nuclear power plant

  7. Code of Ethics for Rehabilitation Educators and Counselors: A Call for Evidence-Based Practice

    Science.gov (United States)

    Burker, Eileen J.; Kazukauskas, Kelly A.

    2010-01-01

    Given the emphasis on evidence-based practice (EBP) in the 2010 Code of Professional Ethics for Rehabilitation Counselors, it has become even more critical for rehabilitation educators and rehabilitation counselors to understand EBP, how to implement it in teaching and in practice, and how to access available EBP resources. This paper defines and…

  8. Radiation dosimetry with plane-parallel ionization chambers: An international (IAEA) code of practice

    International Nuclear Information System (INIS)

    Andreo, P.

    1996-01-01

    Research on plane-parallel ionization chambers since the IAEA Code of Practice (TRS-277) was published in 1987 has expanded our knowledge on perturbation and other correction factors in ionization chamber dosimeter, and also constructional details of these chambers have been shown to be important. Different national organizations have published, or are in the process of publishing, recommendations on detailed procedures for the calibration and use of plane-parallel ionization chambers. An international working group was formed under the auspices of the IAEA, first to assess the status and validity of IAEA TRS-277, and second to develop an international Code of Practice for the calibration and use of plane-parallel ionization chambers in high-energy electron and photon beams. The purpose of this work is to describe the forthcoming Code of Practice. (author). 39 refs, 3 figs, 2 tabs

  9. Radiation dosimetry with plane-parallel ionization chambers: An international (IAEA) code of practice

    Energy Technology Data Exchange (ETDEWEB)

    Andreo, P [Lunds Hospital, Lund (Sweden). Radiophysics Dept.; Almond, P R [J.G. Brown Cancer Center, Univ. of Lousville, Lousville, KY (United States). Dept. of Radiation Oncology; Mattsson, O [Sahlgrenska Hospital, Gothenburg (Sweden). Dept. of Radiation Physics; Nahum, A E [Royal Marsden Hospital, Sutton (United Kingdom). Joint Dept. of Physics; Roos, M [Physikalisch-Technische Bundesanstalt, Braunschweig (Germany)

    1996-08-01

    Research on plane-parallel ionization chambers since the IAEA Code of Practice (TRS-277) was published in 1987 has expanded our knowledge on perturbation and other correction factors in ionization chamber dosimeter, and also constructional details of these chambers have been shown to be important. Different national organizations have published, or are in the process of publishing, recommendations on detailed procedures for the calibration and use of plane-parallel ionization chambers. An international working group was formed under the auspices of the IAEA, first to assess the status and validity of IAEA TRS-277, and second to develop an international Code of Practice for the calibration and use of plane-parallel ionization chambers in high-energy electron and photon beams. The purpose of this work is to describe the forthcoming Code of Practice. (author). 39 refs, 3 figs, 2 tabs.

  10. Safe operation of critical assemblies and research reactors. Code of practice and Technical appendix. 1971 ed

    International Nuclear Information System (INIS)

    Cox, J.

    1971-01-01

    This book is in two parts. The first is a Code of Practice for the Safe Operation of Critical Assemblies and Research Reactors, prepared as a result of a meeting of experts which took place in Vienna on 20-24 May 1968. The Code has been prepared by the International Atomic Energy Agency in co-operation with the World Health Organization, and its publication is sponsored by both organizations. In addition, the Code was approved by the Board of Governors of the International Atomic Energy Agency on 16 December 1968 as part of the Agency's safety standards, which are applied to operations undertaken by Member States with the assistance of the Agency. The Board, in approving the publication of the present book, also recommended Member States to take the Code into account in the formulation of national regulations and recommendations. The second part of the book is a Technical Appendix to give information and illustrative samples that would be helpful in implementing the Code of Practice. This second part, although published under the same cover, is not part of the Code. An extensive Bibliography, amplifying the Technical Appendix, is included at the end.

  11. Codes of Practice related to Harbour and Coastal Engineering in Denmark

    DEFF Research Database (Denmark)

    Burcharth, H. F.

    2000-01-01

    Codes of practice for building and civil engineering works have been produced since 1893 by the "Danish Society of Engineers". Among the early codes are: Reinforces concrete structures (1908, 1943), calculation of reinforced concrete structures in harbour works (1926), Harbour Works (1927), Steel...... structures (1941). The codes were based on the principle of allowable stresses. However, already in 1948 a Danish consulting engineer used a partial safety factor concept for a power station design in order to secure satisfactory safety. The concept was in fact old as it was used by Gerber in his design...

  12. Improving coding accuracy in an academic practice.

    Science.gov (United States)

    Nguyen, Dana; O'Mara, Heather; Powell, Robert

    2017-01-01

    Practice management has become an increasingly important component of graduate medical education. This applies to every practice environment; private, academic, and military. One of the most critical aspects of practice management is documentation and coding for physician services, as they directly affect the financial success of any practice. Our quality improvement project aimed to implement a new and innovative method for teaching billing and coding in a longitudinal fashion in a family medicine residency. We hypothesized that implementation of a new teaching strategy would increase coding accuracy rates among residents and faculty. Design: single group, pretest-posttest. military family medicine residency clinic. Study populations: 7 faculty physicians and 18 resident physicians participated as learners in the project. Educational intervention: monthly structured coding learning sessions in the academic curriculum that involved learner-presented cases, small group case review, and large group discussion. overall coding accuracy (compliance) percentage and coding accuracy per year group for the subjects that were able to participate longitudinally. Statistical tests used: average coding accuracy for population; paired t test to assess improvement between 2 intervention periods, both aggregate and by year group. Overall coding accuracy rates remained stable over the course of time regardless of the modality of the educational intervention. A paired t test was conducted to compare coding accuracy rates at baseline (mean (M)=26.4%, SD=10%) to accuracy rates after all educational interventions were complete (M=26.8%, SD=12%); t24=-0.127, P=.90. Didactic teaching and small group discussion sessions did not improve overall coding accuracy in a residency practice. Future interventions could focus on educating providers at the individual level.

  13. Safety standards, legislation and codes of practice for fuel cell manufacture and operation

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, C.P.

    1999-07-01

    This report examines safety standards, legislation and codes of practice for fuel cell manufacture and operation in the UK, Europe and internationally. Management of health and safety in the UK is discussed, and the characteristics of phosphoric acid (PAFC), proton exchange membrane (PEM), molten carbonate (MCFC), solid oxide (SOFC) fuel cells are described. Fuel cell power plant standards and manufacture in the UK, design and operational considerations, end of life disposal, automotive fuel cell system, and fuelling and vehicular concerns are explored, and standards, legislation and codes of practice are explained in the appendix.

  14. The IAEA Code of Practice on quality assurance, and quality assurance requirements and practices in Member States

    International Nuclear Information System (INIS)

    Raisic, N.

    1982-01-01

    The IAEA Code of Practice on Quality Assurance for Safety in Nuclear Power Plants and the corresponding Safety Guides are reviewed and compared with quality assurance (QA) practices in the IAEA Member States. The QA requirements stipulated by the Code place on the nuclear power plant owner the responsibility to establish an overall QA programme for the plant. In selecting the QA programme level for specific activities, the Code allows of a flexible approach but does not specify gradation in programme requirements. The Code is placing the burden of quality-achieving and quality-assuring functions on the task-performing organizations, namely the designers, manufacturers, constructors and plant operators. The plant owner provides for the management of the overall QA programme, surveillance of activities and verifications of the effectiveness of the constituent programmes of all project participants through programme audits and evaluations. The Code and the supporting Safety Guides are consistent with existing QA practices in Member States. However, certain differences exist, which are mainly expressed in the different QA functions assigned to the various organizations participating in the overall QA programme. Also, some Member States place more emphasis on redundant verification activities than on quality-achieving functions. Tendencies are also identified to grade the QA requirements in respect of items and activities, in accordance with some pre-established criteria. In an annex to the paper, QA practices in Member States participating in the Agency's Technical Review Committee on Quality Assurance (TRC-QA) are reviewed, indicating their similarities to and differences from the Code

  15. Absorbed dose determination in high energy photon beams using new IAEA TRS - 398 Code of Practice

    International Nuclear Information System (INIS)

    Suriyapee, S.; Srimanoroath, S.; Jumpangern, C.

    2002-01-01

    The absorbed dose calibration of 6 and 10 MV X-ray beams from Varian Clinac 1800 at King Chulalongkorn Memorial Hospital Bangkok, Thailand were performed using cylindrical chamber 0.6 cc NE2571 Serial No. 1633 with graphite wall and Delrin build up cap and lonex Dosemaster NE 2590 Serial No. 223. The absorbed dose determination followed the IAEA code of practice TRS-277. The new IAEA code of practice TRS-398 have been studied to compare the result with the IAEA TRS-277

  16. Code of practice for the design of laboratories using radioactive substances for medical purposes

    International Nuclear Information System (INIS)

    1981-01-01

    This Code has been prepared to supplement the radioactive substances acts and regulations implemented in Australia. It is intended as a guide to safe practices but is not legislation. Areas covered include siting, layout, surface finishes, laboratory furniture and fittings, ventilation, containment and release of airborne effluent and storage of radioactive substances

  17. Radiosterilization of Medical Products and Recommended Code of Practice. Proceedings of a Symposium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1967-09-15

    Proceedings of a Symposium organized by the IAEA and held in Budapest, 5-9 June 1967, together with the IAEA recommended 'Code of Practice for Radiosterilization of Medical Products' resulting from a panel meeting held in Vienna, December 1966, and considered at the Symposium. The meeting was attended by 160 participants from 25 Member States and 3 international organizations. The commercial use of ionizing radiation for sterilizing medical supplies extends back to the early 1960s. The ability of the process to sterilize products made of materials such as plastics, which are destroyed by traditional sterilization procedures, has promoted much new thinking in product design. Most important is the ability of the radiation to sterilize items finally sealed and packed for dispatch, eliminating risk of recontamination. Some new fields of research are discussed in the Proceedings. The Code of Practice, drawn up by experts at several meetings, is aimed at producing uniform, safe procedures throughout the world, facilitating international trade in radiosterilized products. Contents: Introductory lecture; Radiosterilization of pharmaceuticals and bioproducts (12 papers); Radiosterilization of biological tissues (6 papers); Vaccine production by ionizing radiation (5 papers); Radiosterilization of medical devices and supplies (4 papers); Radiosensitivity of micro-organisms and microbiological testing (4 papers); Technical and economic aspects of radiosterilization (6 papers); Code of practice for radiosterilization (full code and 1 review paper). The Code of Practice is in English. Each paper is in its original language (29 English, 5 French, 4 Russian and 1 Spanish) and is preceded by an abstract in English with one in the original language if this is not English. Discussions are in English. (author)

  18. Radiosterilization of Medical Products and Recommended Code of Practice. Proceedings of a Symposium

    International Nuclear Information System (INIS)

    1967-01-01

    Proceedings of a Symposium organized by the IAEA and held in Budapest, 5-9 June 1967, together with the IAEA recommended 'Code of Practice for Radiosterilization of Medical Products' resulting from a panel meeting held in Vienna, December 1966, and considered at the Symposium. The meeting was attended by 160 participants from 25 Member States and 3 international organizations. The commercial use of ionizing radiation for sterilizing medical supplies extends back to the early 1960s. The ability of the process to sterilize products made of materials such as plastics, which are destroyed by traditional sterilization procedures, has promoted much new thinking in product design. Most important is the ability of the radiation to sterilize items finally sealed and packed for dispatch, eliminating risk of recontamination. Some new fields of research are discussed in the Proceedings. The Code of Practice, drawn up by experts at several meetings, is aimed at producing uniform, safe procedures throughout the world, facilitating international trade in radiosterilized products. Contents: Introductory lecture; Radiosterilization of pharmaceuticals and bioproducts (12 papers); Radiosterilization of biological tissues (6 papers); Vaccine production by ionizing radiation (5 papers); Radiosterilization of medical devices and supplies (4 papers); Radiosensitivity of micro-organisms and microbiological testing (4 papers); Technical and economic aspects of radiosterilization (6 papers); Code of practice for radiosterilization (full code and 1 review paper). The Code of Practice is in English. Each paper is in its original language (29 English, 5 French, 4 Russian and 1 Spanish) and is preceded by an abstract in English with one in the original language if this is not English. Discussions are in English. (author)

  19. A Catalan code of best practices for the audiovisual sector

    OpenAIRE

    Teodoro, Emma; Casanovas, Pompeu

    2010-01-01

    In spite of a new general law regarding Audiovisual Communication, the regulatory framework of the audiovisual sector in Spain can still be defined as huge, disperse and obsolete. The first part of this paper provides an overview of the major challenges of the Spanish audiovisual sector as a result of the convergence of platforms, services and operators, paying especial attention to the Audiovisual Sector in Catalonia. In the second part, we will present an example of self-regulation through...

  20. Alcohol Marketing, Communications and Sponsorship Codes of Practice

    OpenAIRE

    Department of Health (Ireland)

    2008-01-01

    In 2002 the Minister for Health and Children met with representative organisations from the Advertising Industry, the Association of Advertisers in Ireland (AAI), representing advertisers, the Institute of Advertising Practitioners in Ireland (IAPI), representing the advertising agencies and Drinks Industry Group Ireland (DIGI) representing the Alcohol Drinks Industry. The discussions centred on the Ministerâ?Ts concerns about some of the content, weight of exposure and placement of alcoh...

  1. Reactor Safety Commission Code of Practice for Pressurized Water Reactors

    International Nuclear Information System (INIS)

    1990-01-01

    The Reactor Safety Commission of the Federal German Republic has summarized in the form of Official Guidelines the safety requirements which, in the Commission's view, have to be met in the design, construction and operation of a nuclear power station equipped with a pressurized water reactor. The Third Edition of the RSK Guidelines for pressurized water reactors dated 14.10.81. is a revised and expanded version of the Second Edition dated 24.1.79. The Reactor Safety Commission will with effect from October 1981 use these Guidelines in consultations on the siting of and safety concept for the installation approval of future pressurized water reactors and will assess these nuclear power stations during their erection in the light of these Guidelines. They have not however been immediately conceived for the adaptation of existing nuclear power stations, whether under construction or in operation. The scope of application of these Guidelines to such nuclear power stations will have to be examined for each individual case. The main aim of the Guidelines is to simplify the consultation process within the reactor Safety Commission and to provide early advice on the safety requirements considered necessary by the Commission. (author)

  2. Developing a Code of Practice for Learning Analytics

    Science.gov (United States)

    Sclater, Niall

    2016-01-01

    Ethical and legal objections to learning analytics are barriers to development of the field, thus potentially denying students the benefits of predictive analytics and adaptive learning. Jisc, a charitable organization that champions the use of digital technologies in UK education and research, has attempted to address this with the development of…

  3. NATO Code of Best Practice for C2 Assessment (revised)

    Science.gov (United States)

    2002-10-01

    other related topics in the SHAPE Armour /Anti- Armour study. In R. K. Huber (Ed.), Systems analysis and modeling in defense— development, trends, and...RIGOUR); and • Strengths, weaknesses, opportunities, and threats ( SWOT ). Where an assessment uses experimentation or observation of exercises it is...RIGOUR – Repeatability, Independence, Grounding in reality, Objectivity of process, Uncertainty, and Robustness ROE – Rules of Engagement SWOT

  4. Code of practice for conducting radiation work at PINSTECH (revised 1992)

    International Nuclear Information System (INIS)

    Aslam, M.; Atta, M.A.; Orfi, S.D.

    1992-02-01

    The primary objective of this code is to achieve standard of radiation protection and safety set by Pakistan Nuclear Safety and Radiation Protection (PNSRP) ordinance 1984 and PNSRP regulations 1990. Secondary objective remains to make all best efforts to implement latest ICRP recommendations. The revised code of practice sets forth the objective of adequate system radiological safety of radiation workers, environment and general public. The code provides the guidance to persons and authorities who are responsible for the protection of workers and those who are concerned with the planning and management of personnel monitoring services. The procedures set forth in the code are mandatory and in no case should any of them be deviated under normal conditions. All those supervising and performing any kind of radiation work are required to study and adhere to those procedures and shell make all possible efforts to keep the exposure as low as reasonably achievable (ALARA), social and economic factor being taken into account. (author)

  5. Validity of the Italian Code of Ethics for everyday nursing practice.

    Science.gov (United States)

    Gobbi, Paola; Castoldi, Maria Grazia; Alagna, Rosa Anna; Brunoldi, Anna; Pari, Chiara; Gallo, Annamaria; Magri, Miriam; Marioni, Lorena; Muttillo, Giovanni; Passoni, Claudia; Torre, Anna La; Rosa, Debora; Carnevale, Franco A

    2016-12-07

    The research question for this study was as follows: Is the Code of Ethics for Nurses in Italy (Code) a valid or useful decision-making instrument for nurses faced with ethical problems in their daily clinical practice? Focus groups were conducted to analyze specific ethical problems through 11 case studies. The analysis was conducted using sections of the Code as well as other relevant documents. Each focus group had a specific theme and nurses participated freely in the discussions according to their respective clinical competencies. The executive administrative committee of the local nursing licensing council provided approval for conducting this project. Measures were taken to protect the confidentiality of consenting participants. The answer to the research question posed for this investigation was predominantly positive. Many sections of the Code were useful for discussion and identifying possible solutions for the ethical problems presented in the 11 cases. We concluded that the Code of Ethics for Nurses in Italy can be a valuable aid in daily practice in most clinical situations that can give rise to ethical problems. © The Author(s) 2016.

  6. Code of practice on the international transboundary movement of radioactive waste

    International Nuclear Information System (INIS)

    1990-11-01

    This Code of Practice should serve as guidelines of the IAEA to the States for the development and harmonization of policies and laws on the international transboundary movement of radioactive wastes. It relies on international standards for the safe transport of radioactive material and the physical protection of nuclear material, as well as the standards for basic nuclear safety and radiation protection and radioactive waste management; it does not establish separate guidance in these areas. Furthermore, this Code, which is advisory, does not affect in any way existing and future arrangements among States which relate to matters covered by it and are compatible with its objectives

  7. Code of Practice on the International Transboundary Movement of Radioactive Waste; Code De Bonne Pratique Sur Le Mouvement Transfrontiere International De Dechets Radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-11-03

    On 21 September 1990, the General Conference, by resolution GC(XXXIV)/RES/530, adopted a Code of Practice on the International Transboundary Movement of Radioactive Waste and requested the Director General - inter alia - to take all necessary steps to ensure wide dissemination of the Code of Practice at both the national and the international level. The Code of Practice was elaborated by a Group of Experts established pursuant to resolution GC(XXXII)/RES/490 adopted by the General Conference in 1988. The text of the Code of Practice is reproduced herewith for the information of all Member States [French] Le 21 septembre 1990, la Conference generale, par la resolution GC(XXXIV)/RES/530, a adopte le Code de bonne pratique sur le mouvement transfrontiere international de dechets radioactifs et a prie le Directeur general-notamment-de prendre toutes les mesures necessaires pour assurer une large diffusion du Code de bonne pratique aux niveaux tant national qu'international. Le Code de bonne pratique a ete elabore par un groupe d'experts cree en application de la resolution GC(XXXII)/RES/490 adoptee par la Conference generale en 1988. Le texte du Code de bonne pratique est reproduit ci-apres pour l'information de tous les Etats Membres.

  8. Safe Operation of Nuclear Power Plants. Code of Practice and Technical Appendices

    International Nuclear Information System (INIS)

    1969-01-01

    This book is in two parts. The first is a Code of Practice for the Safe Operation of Nuclear Power Plants and the second part is a compilation of technical appendices. Its object is to give information and illustrative examples that would be helpful in implementing the Code of Practice. This second part, although published under the same cover, is not part of the Code. Safe operation of a nuclear power plant postulates suitable siting and proper design, construction and management of the plant. Under the present Code of Practice for the Safe Operation of Nuclear Power Plants, those intending to operate the plant are recommended to prepare documentation which would deal with its operation and include safety analyses. The documentation in question would be reviewed by a regulatory body independent of the operating organization; operation would be authorized on the understanding that it would comply with limits and conditions designed to ensure safety. The Code may be subject to revision in the light of experience. The Appendices provide additional information together with some examples relating to certain topics dealt with in the Code; it must be emphasized that they are included as examples for information only and are not part of any recommendation. Purpose and scope: The recommendations in the Code are designed to protect the general public and the operating personnel from radiation hazards, and the Code forms part of the Agency's Safety Standards. The Code, which should be used in conjunction with the Agency's other Safety Standards, provides guidance and information to persons and authorities responsible for the operation of stationary nuclear power plants whose main function is the generation of thermal, mechanical or electrical power; it is not intended to apply to reactors used solely for experimental or research purposes. It sets forth minimum requirements which, it is believed, in the light of experience, must be met in order to achieve safe operation of a

  9. Preventing another Chernobyl: Codes, practices, and the role of new technology

    International Nuclear Information System (INIS)

    Egan, J.R.

    1988-01-01

    This chapter deals with preventice measures to be taken in the context of technology. The author describes the codes of practice and safety standards established to ensure nuclear power plant safety and suggests that they be improved and made binding on states through legislation or agreements (NEA) [fr

  10. CODE SETTING TRENDS IN ELECTORAL MATTERS - CODE OF GOOD PRACTICE IN ELECTORAL MATTERS - VENICE 2002

    Directory of Open Access Journals (Sweden)

    Mircea-Constantin SINESCU

    2016-05-01

    Full Text Available The integrated and ongoing effort of the of the states in the European area to modernize and adapt their laws to the current needs and exigencies of the citizens is transposed, in terms of constitutional matters, in the actions of the European Commission for Democracy through Law, better known as the Venice Commission, as Venice is the place of the proceedings of this Council of Europe's advisory body on constitutional matters.

  11. CODE SETTING TRENDS IN ELECTORAL MATTERS - CODE OF GOOD PRACTICE IN ELECTORAL MATTERS - VENICE 2002

    OpenAIRE

    Mircea-Constantin SINESCU; Mihai-Daniel ONIȘOR

    2016-01-01

    The integrated and ongoing effort of the of the states in the European area to modernize and adapt their laws to the current needs and exigencies of the citizens is transposed, in terms of constitutional matters, in the actions of the European Commission for Democracy through Law, better known as the Venice Commission, as Venice is the place of the proceedings of this Council of Europe's advisory body on constitutional matters.

  12. Coding of Neuroinfectious Diseases.

    Science.gov (United States)

    Barkley, Gregory L

    2015-12-01

    Accurate coding is an important function of neurologic practice. This contribution to Continuum is part of an ongoing series that presents helpful coding information along with examples related to the issue topic. Tips for diagnosis coding, Evaluation and Management coding, procedure coding, or a combination are presented, depending on which is most applicable to the subject area of the issue.

  13. Quality assurance for safety in nuclear power plants. A code of practice

    International Nuclear Information System (INIS)

    1978-01-01

    The Code of Practice is a part of the International Atomic Energy Agency's programme, referred to as the NUSS programme (Nuclear Safety Standards), for establishing Codes of Practice and Safety Guides relating to land-based stationary thermal neutron power plants. The documents are based on documentation and experience from various national systems and practices. The present document provides the recommended principles and objectives for the establishment and implementation of a quality assurance programme during design, manufacture, construction, commissioning and operation of structures, system and components important to safety. They are applicable by all those responsible for the power plant, by plant designers, suppliers, architect-engineers, plant constructors, plant operators and other organizations participating in activities affecting quality. The Lists of relevant definition and the Provisional List of NUSS Programme Titles are given

  14. THEORETICAL AND PRACTICAL APPROACHES REGARDING THE ADOPTION OF CORPORATE GOVERNANCE CODES

    Directory of Open Access Journals (Sweden)

    Sorin Nicolae Borlea

    2013-09-01

    Full Text Available In the European Union, the concept of corporate governance began to emerge more clearly after 1997, when most countries have however, voluntarily adopted corporate governance codes. The impulse of adopting these codes consists in the financial scandals related to the failure of the British companies listed on the stock exchange. Numerous scandals involving big companies such as Enron, WorldCom, Parmalat, Xerox, Merrill Lynch, Andersen and so on, conduct to a lack of investors’ confidence. These crises that have started to alarm governments, supervisory authorities, companies, investors and even the general public because of the fragility of the corporate governance’s system, highlight the need to rethink its structures. The process of adapting the corporate governance provisions in order to ensure transparency, responsibility and fair treatment of shareholders has resulted in the development of Corporate Governance Principles by the Organization for Economic Cooperation and Development (OECD. In order to asses these principles, it has started to identify the common elements of codes, one the most effective practice models of governance. Once the benefits of corporate governance practices have been understood and assimilated by the developed country, the developing countries (also Romania have begun to adopt "the best practices" in corporate governance, especially because this need is acutely felt in the changes required by the transition to a market economy. Our article describes the origins of the corporate governance, the concept and evolution of the corporate governance code at an international level, European level and also at a Romanian level.

  15. UKAEA code of practice for tracer and irradiation studies involving the use of volunteers

    International Nuclear Information System (INIS)

    Pritchard, J.N.; Morgan, A.

    1987-06-01

    The subject is discussed under the following headings: 1) General considerations in volunteer studies (informed consent, beneficial objectives, recruitment from within or without the workforce, records, compensation, codes of practice, confidentiality etc.) 2) Tracer and irradiation studies approval committee, (terms of reference, membership, dose limitations, assessment of chemical toxicity, procedure for submitting proposals) 3) Obtaining a project licence 4) Conduct of volunteer experiments 5) The use of non-authority volunteers. (U.K.)

  16. Comparison of the sand liquefaction estimated based on codes and practical earthquake damage phenomena

    Science.gov (United States)

    Fang, Yi; Huang, Yahong

    2017-12-01

    Conducting sand liquefaction estimated based on codes is the important content of the geotechnical design. However, the result, sometimes, fails to conform to the practical earthquake damages. Based on the damage of Tangshan earthquake and engineering geological conditions, three typical sites are chosen. Moreover, the sand liquefaction probability was evaluated on the three sites by using the method in the Code for Seismic Design of Buildings and the results were compared with the sand liquefaction phenomenon in the earthquake. The result shows that the difference between sand liquefaction estimated based on codes and the practical earthquake damage is mainly attributed to the following two aspects: The primary reasons include disparity between seismic fortification intensity and practical seismic oscillation, changes of groundwater level, thickness of overlying non-liquefied soil layer, local site effect and personal error. Meanwhile, although the judgment methods in the codes exhibit certain universality, they are another reason causing the above difference due to the limitation of basic data and the qualitative anomaly of the judgment formulas.

  17. Code of practice for the use of sealed radioactive sources in borehole logging (1998)

    International Nuclear Information System (INIS)

    1989-12-01

    The purpose of this code is to establish working practices, procedures and protective measures which will aid in keeping doses, arising from the use of borehole logging equipment containing sealed radioactive sources, to as low as reasonably achievable and to ensure that the dose-equivalent limits specified in the National Health and Medical Research Council s radiation protection standards, are not exceeded. This code applies to all situations and practices where a sealed radioactive source or sources are used through wireline logging for investigating the physical properties of the geological sequence, or any fluids contained in the geological sequence, or the properties of the borehole itself, whether casing, mudcake or borehole fluids. The radiation protection standards specify dose-equivalent limits for two categories: radiation workers and members of the public. 3 refs., tabs., ills

  18. Model Code of Safe Practice in the Petroleum Industry: Pt. 8

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    This code has been prepared for use on a worldwide basis as a guide to safe practice for those concerned with drilling and production operations for oil and gas in offshore areas. It is intended to provide information and guidance on those offshore drilling, production and support activities which have an impact on safety and therefore require detailed care and attention. Each chapter of the Code covers an important drilling, production or support activity and has an introduction which describes the part each activity plays in the overall offshore operation. (author).

  19. Safety in nuclear power plant operation, including commissioning and decommissioning. A code of practice

    International Nuclear Information System (INIS)

    1978-01-01

    Safe operation of a nuclear power plant postulates satisfactory siting, design, construction and commissioning, together with proper management and operation of the plant. This Code of Practice deals with the safety aspects of management, commissioning, operation and decommissioning of the plant. It forms part of the Agency's programme, referred to as the NUSS programme, for establishing Codes of Practice and Safety Guides relating to land-based stationary thermal neutron power plants. It has been prepared for the use of those responsible for the operation of stationary nuclear power plants, the main function of which is the generation of electrical and/or thermal power, and for the use of those responsible for regulating the operation of such plants. It is not intended for application to reactors used solely for experimental or research purposes. The provisions in the Code are designed to provide assurance that operational activities are carried out without undue radiological hazard to the general public and to persons on the site. It should be understood that the provisions in the Code set forth minimum requirements which shall be met in order to achieve safe operation of a nuclear power plant

  20. Higher Education in Further Education Colleges: Indirectly Funded Partnerships: Codes of Practice for Franchise and Consortia Arrangements. Report.

    Science.gov (United States)

    Higher Education Funding Council for England, Bristol.

    This report provides codes of practice for two types of indirectly funded partnerships entered into by higher education institutions and further education sector colleges: franchises and consortia. The codes of practice set out guidance on the principles that should be reflected in the franchise and consortia agreements that underpin indirectly…

  1. KS 2031 Radioactive waste - Disposal by the user - Code of practice

    International Nuclear Information System (INIS)

    Mayaka, Edward E.

    2017-01-01

    Sources of ionizing radiation are widely used in Medicine, Agriculture, Industry, Research and Education, and Security checks. The purpose of this code of practice is to recommend practices which are helpful in achieving the ALARA principle for small quantities of radioactive waste and which will ensure a degree of uniformity in radioactive waste disposal procedures. It has been prepared to supplement the radiation control legislation implemented by the Radiation Protection Board. It is possible to carry out a formal radiological hazard assessment of any proposed radioactive waste disposal activity that provides estimates of the risk to a population that is potentially exposed to ionising radiation as a result of the activity

  2. Deliberation at the hub of medical education: beyond virtue ethics and codes of practice.

    Science.gov (United States)

    Barilan, Y M; Brusa, M

    2013-02-01

    Although both codes of practice and virtue ethics are integral to the ethos and history of "medical professionalism", the two trends appear mutually incompatible. Hence, in the first part of the paper we explore and explicate this apparent conflict and seek a direction for medical education. The theoretical and empirical literature indicates that moral deliberation may transcend the incompatibilities between the formal and the virtuous, may enhance moral and other aspects of personal sensitivity, may help design and improve other parts of the curricula, and may foster self-awareness and clarification of the professional role. Not only are these goals essential for good and conscientious doctoring, but they may also reduce physicians' "burn-out". We argue that medical education should focus on the ubiquitous practice of deliberation in contemporary medicine, and especially the practice of moral deliberation.

  3. RTE - Compliance with the code of good practices and Independence of RTE. 2013 Annual Report

    International Nuclear Information System (INIS)

    2013-01-01

    RTE Reseau de Transport d'Electricite (Electricity Transmission System Operator) is referred to in Article L111-40 of the French Energy Code as the company in charge of managing France's public electricity transmission grid. For this purpose, RTE must comply with all the rules and obligations that apply to transmission grid management companies as defined by the Energy Code. More particularly, the articles concerning the Transmission System Operators (TSOs) belonging to a Vertically Integrated Undertaking (VIU) apply to RTE, a wholly-owned subsidiary of Electricite de France. The purpose of these provisions is to establish and maintain over time the independence of the transmission grid operator vis-a-vis the VIU. The Commission de Regulation de l'Energie (CRE - Energy Regulation Board) certified RTE in its deliberation of January 26, 2012: To maintain this certification, RTE is required to comply with its commitments made within the framework of the certification process and maintain the conditions of independence that were approved by the CRE. Among the obligations that RTE is required to comply with as an independent transmission manager is the need to bring together 'in a code of good practices approved by the Energy Regulation Board, the organisational measures taken to prevent any risks of discriminatory practices in terms of access to the grid' (Article L111-22). RTE is also required to put in place 'a Compliance Officer in charge of ensuring [...] the conformity of its methods with the obligations of independence incumbent on it with regard to other companies belonging to the VIU', 'to verify the application [...] of the commitments appearing in the code of good practices' and to draw up an annual report [...] which it sends on to the Energy Regulating Board' on the subject (Article L111-34). This document is the report regarding compliance with the code of good practices for 2013 by the RTE Compliance Officer. It is destined for the CRE and is intended to

  4. Governmental organization for the regulation of nuclear power plants. A code of practice

    International Nuclear Information System (INIS)

    1978-01-01

    This Code of Practice recommends requirements for a regulatory body responsible for regulating the siting, construction, commissioning, operation and decommissioning of nuclear power plants for safety. It forms part of the Agency's programme, referred to as the NUSS programme, for establishing Codes of Practice and Safety Guides relating to land-based stationary thermal neutron power plants. This Code has been prepared to provide recommendations for Member States embarking on a nuclear power programme and covers: (1) Establishing and maintaining a regulatory body to which is assigned the responsibility for authorizing the siting, construction, commissioning, operation and decommissioning of nuclear power plants after appropriate review and assessment (2) Organizing for and conducting the review and assessment of the safety of nuclear power plants (3) Conducting the necessary regulatory inspections and taking necessary enforcement actions during all stages of the licensing process in order to ensure that the limits and conditions of the licences are being complied with by the applicants/licensees and their contractors (4) Establishing regulations and criteria for nuclear-related health, safety and environmental protection

  5. Application of the new International Code of Practice for dosimetry in diagnostic radiology to conventional exams

    International Nuclear Information System (INIS)

    Martinez Gonzalez, A.; Cardenas Herrera, J.; Walwyn Salas, G.; Machado, A.; Mora Machado, R. de la

    2008-01-01

    Full text: During the recent years, a policy for updating and installation of the X-ray equipment, specialized as well as conventional, have been carrying out, in Cuba. Conventional equipment has reached almost the whole primary level. Considering this situation, the quality control programs and clinical dosimetry have become even more important. Regarding the last one, an International Code of Practice for Dosimetry in Diagnostic Radiology had been published by the International Atomic Energy Agency in order to been used as a guide and to standardize the methodologies used to evaluate the patient exposure in radiodiagnostic. Taken into consideration the above reasons, an assessment of the aforementioned code of practice was done in order to choose the most feasible methodology to implement in the country. The evaluation was performed considering the lack of dosimetric equipment and medical physicists in this practice, in the interests of increasing the measurements scope to a large number of services as well as to standardize the methodology on a national scale. The present work shows the results obtained from the application of the new code of practice to conventional radiology exams in some medical institutions. Out of 3 on patients measurements methodologies described in the code of practice, the one of measurement of the incident air kerma was chosen. This methodology allow to the physicist to focus on the diagnostic equipment tests and to delegate the collection of the patient and exposure parameters data to the technicians, which make the increased of the patient and diagnostic departments sample, possible. The measurements were carried out in 2 hospital of the capital. The exams involved in the assessments were thorax PA, lumbar spine AP and lumbar spine LAT. In every diagnostic service, 25 patients were chosen on each projection. The weight and height average of the patient sample were 68 kg and 167 cm respectively. In the assessment were considered only

  6. Coding Military Command as a Promiscuous Practice

    DEFF Research Database (Denmark)

    Ashcraft, Karen Lee; Muhr, Sara Louise

    2018-01-01

    by translating the vague promise of queering leadership into a tangible method distinguished by specific habits. The article formulates this analytical practice out of empirical provocations encountered by the authors: namely, a striking mismatch between their experiences in military fields and the dominant......Despite abundant scholarship addressed to gender equity in leadership, much leadership literature remains invested in gender binaries. Metaphors of leadership are especially dependent on gender oppositions, and this article treats the scholarly practice of coding leadership through gendered...... metaphor as a consequential practice of leadership unto itself. Drawing on queer theory, the article develops a mode of analysis, called ‘promiscuous coding’, conducive to disrupting the gender divisions that currently anchor most leadership metaphors. Promiscuous coding can assist leadership scholars...

  7. Code of practice for the disposal of radioactive waste by the user

    International Nuclear Information System (INIS)

    1985-01-01

    The purpose of the Code is to recommend practices for the Safe disposal of small quantities of radioactive waste so that the exposure of persons to radiation is as low as reasonably achievable and below prescribed limits. The areas covered are: radiological hazard assessments; waste forms; responsibilities of statutory authorities, users and tip and incinerator operators; transport of radioactive waste; mechanisms of disposal, including municipal tips, incineration, sewerage, disposal to the atmosphere and interim storage. Guidelines are given for the packaging and transport of radioactive waste

  8. Review of the Code of Practice for the Radiosterilization of Medical Products

    International Nuclear Information System (INIS)

    Kallings, L.O.

    1967-01-01

    The background of the IAEA recommendations for a Code of Practice is outlined. The possibility of laying down broad safety margins based on scientific foresight and detailed advanced planning will serve to guide the rapidly accelerating acceptance of radiosterilization by industry, especially in those firms producing supplies for use in medicine and surgery. Production control should be attuned to the scientific and technological advances, and it is becoming clear that the focus of control should be moved away from sterility testing of the finished products to hygienic and sterile operations during the manufacturing operations themselves. The contamination of the product before sterilization should already have been kept to a minimum, and this pre-sterilization level of contamination should be regularly recorded using bacteriological tests. The choice of dosage should be based on average pre-sterilization counts and the inactivation factors found desirable for die intended use of the product. On commissioning, or whenever an existing process is altered, the efficiency of the irradiation facility must be tested using microbiological reference standards. The margin of safety should be checked by using deliberately contaminated articles. However, the backbone of the control procedures must still be dosimetry. The preparation of a Code of Practice for the Radiosterilization of Medical Products will constitute a challenge to operators working with other sterilizing procedures. (author)

  9. Benefits and risks of adopting the global code of practice for recreational fisheries

    Science.gov (United States)

    Arlinghaus, Robert; Beard, T. Douglas; Cooke, Steven J.; Cowx, Ian G.

    2012-01-01

    Recreational fishing constitutes the dominant or sole use of many fish stocks, particularly in freshwater ecosystems in Western industrialized countries. However, despite their social and economic importance, recreational fisheries are generally guided by local or regional norms and standards, with few comprehensive policy and development frameworks existing across jurisdictions. We argue that adoption of a recently developed Global Code of Practice (CoP) for Recreational Fisheries can provide benefits for moving recreational fisheries toward sustainability on a global scale. The CoP is a voluntary document, specifically framed toward recreational fisheries practices and issues, thereby complementing and extending the United Nation's Code of Conduct for Responsible Fisheries by the Food and Agricultural Organization. The CoP for Recreational Fisheries describes the minimum standards of environmentally friendly, ethically appropriate, and—depending on local situations—socially acceptable recreational fishing and its management. Although many, if not all, of the provisions presented in the CoP are already addressed through national fisheries legislation and state-based fisheries management regulations in North America, adopting a common framework for best practices in recreational fisheries across multiple jurisdictions would further promote their long-term viability in the face of interjurisdictional angler movements and some expanding threats to the activity related to shifting sociopolitical norms.

  10. The UK Nuclear Industry Code of Practice on Clearances and Exemptions

    International Nuclear Information System (INIS)

    Owen, D.

    2004-01-01

    In 2001, the major nuclear organisations in the United Kingdom started development of a document that would identify and facilitate consistent the application of good practice within the industry for clearing and sentencing of articles, substances and wastes which may be clean, or radioactive at very low levels below thresholds of regulatory control. The document includes: (i) Clarification of the industry's interpretation of legislation associated with the clearance and sentencing of articles, substances and wastes which are or have the potential to have been contaminated by radioactivity or activated by nuclear radiations; (ii) Industry agreement on what is considered to be the good practice where legislation is imprecise or unclear, (iii) A standard management framework, adopted by all organisations within the nuclear industry, that should justify safe and efficient clearance of potentially radioactive articles, substances and wastes; and (IV) Agreed guidance on the principles, processes and practices which should be followed for clearances and sentencing The Document mandates a system that allows articles and substances to be released from further control, where this is appropriate, using robust radiological protection principles. The need to avoid sentencing of clean materials as radioactive waste where this is not appropriate, the primacy of bulk, rather than surface radioactivity clearance criteria, and the need to disallow such clearances until all relevant legislation has been satisfied, are all clear principles contained within the document. An interim issue of the Code of Practice was issued in May 2003. This version has been formally adopted by all of the major users of radioactive material in the United Kingdom, and has two main objectives: -Trial use of the concepts at the working level, and - As a basis for further discussion with interested stakeholders. The paper summarises: - How the interim version of the Code of Practice was developed; - The

  11. CODES AND PRACTICES OF IMPLEMENTATION OF CORPORATE GOVERNANCE IN ROMANIA AND RESULTS REPORTING

    Directory of Open Access Journals (Sweden)

    GROSU MARIA

    2011-12-01

    Full Text Available Corporate governance refers to the manner in which companies are directed and controlled. Business management was always guided by certain principles, but the current meaning of corporate governance concerns and the contribution that companies must have the overall development of modern society. Romania used quite late in adopting a code of good practice in corporate governance, being driven, in particular, the privatization process, but also the transfer of control and surveillance of political organizations by the Board of Directors (BD. Adoption of codes of corporate governance is necessary to harmonize internal business requirements of a functioning market economy. In addition, the CEE countries, the European Commission adopted an action plan announcing measures to modernize company law and enhance corporate governance. Romania takes steps in this direction by amending the Company Law, and other regulations, although the practice does not necessarily keep pace with the requirements. This study aims on the one hand, an analysis of the evolution of corporate governance codes adopted in Romania, but also an empirical research of the implementation of corporate governance principles of a representative sample of companies listed on the Bucharest Stock Exchange (BSE. Consider relevant research methodology, because the issuer of the Codes of CG in Romania is BSE listed companies requesting their voluntary implementation. Implementation results are summarized and interpreted at the expense of public reports of the companies studied. Most studies undertaken in this direction have been made on multinational companies which respects the rule of corporate governance codes of countries of origin. In addition, many studies also emphasize the fair treatment of stakeholders rather than on models of governance adopted (monist/dualist with implications for optimizing economic objectives but also social. Undertaken research attempts to highlight on the one

  12. Safe use of mine winding ropes, volume 4: studies towards a code of practice for rope condition assessment.

    CSIR Research Space (South Africa)

    Borrello, M

    1996-06-01

    Full Text Available The aim of this investigation was the verification of the code of Practice for Rope Condition Assessment. Ropes were meant to be discarded according to the discard criteria as outlined in the code and then tested by the CSIR. The results...

  13. Development of European creep crack growth testing code of practice for industrial specimens

    International Nuclear Information System (INIS)

    Dogan, B.; Nikbin, K.; Petrovski, B.

    2004-01-01

    The integrity and residual life assessment of high temperature components require defects, detected or assumed to exist, through minimum allowable limits of detectable flaws using nondestructive testing methods. It relies on information obtained from the material's mechanical, uniaxial creep, creep crack initiation and growth properties. The information derived from experiments needs to be validated and harmonised following a Code of Practice that data variability between different institutions can be reduced to a minimum. The present paper reports on a Code of Practice (CoP) being prepared within the framework of the partially European Commission funded project CRETE. The novel aspect of the presented CoP is the inclusion of component relevant industrial specimen geometries. It covers testing and analysis of Creep Crack growth (CCG) in metallic materials at elevated temperature using six different cracked geometries that have been validated in. It aims to give advice on testing, measurements and analysis of creep crack growth data for a range of creep brittle to creep ductile materials using component service relevant specimen geometries and sizes. The CoP may be used for material selection criteria and inspection requirements for damage tolerant applications. In quantitative terms, these types of tests can be used to assess the individual and combined effects of metallurgical, fabrication, operating temperature, and loading conditions on creep crack growth life. Further issues will be addressed including material properties, damage and crack growth related constraint effect, stress relaxation and stress-strain fields, residual stresses, partitioning displacement, analysis of elastic creep, elastic compliance measurements

  14. Development of an international code of practice for dosimetry in X-ray diagnostic radiology

    International Nuclear Information System (INIS)

    Pernicka, F.; Carlsson, G.A.; Dance, D.R.; DeWerd, L.A.; Kramer, H.-M.; Ng, K.-H.

    2001-01-01

    Medical x-ray examinations contribute greatly to the population dose from man-made radiation sources. There is a need to control this dose and therefore to optimise the design and use of x-ray imaging systems. A key stage in this process is the standardisation of the procedures for dose measurement in the clinic. The Dosimetry and Medical Radiation Physics Section of the IAEA has a number of activities to further advance the standards for x-ray diagnostics. One of these activities is the coordination of a working group to develop a code of practice, which will facilitate the IAEA calibration activities, TLD intercomparisons and audits, educational activities, and technical assistance to Member States. The code of practice will aid in the standardisation of various dosimetric techniques in x-ray diagnostic radiology. The CoP working group has had an initial meeting to review the current status of dosimetry for conventional radiology, fluoroscopy, mammography, computed tomography and dental radiology. The CoP will include the establishment of standards and calibrations at the SSDLs, phantom and patient measurements and procedures for dosimetry in the clinic. (author)

  15. Increasing asthma mortality in Denmark 1969-88 not a result of a changed coding practice

    DEFF Research Database (Denmark)

    Juel, K; Pedersen, P A

    1992-01-01

    We have studied asthma mortality in Denmark from 1969 to 1988. Age standardized mortality rates calculated in three age groups, 10-34, 35-59, and greater than or equal to 60 years, disclosed similar trends. Increasing mortality from asthma in the mid-1970s to 1988 was seen in all three age groups...... with higher mortality in 1979-88 as compared with 1969-78 of 95%, 55%, and 69%, respectively. Since the eighth revision of the International Classification of Diseases (ICD8) was used in Denmark over the entire 20-year period, changes in coding practice due to change of classification system cannot explain...

  16. Code of practice and design principles for portable and transportable radiological protection systems

    International Nuclear Information System (INIS)

    Wells, F.H.; Powell, R.G.

    1980-10-01

    The Code of Practice and design principles for portable and transportable radiological protection systems are presented in three parts. Part 1 specifies the requirement for Radiological Protection Instrumentation (RPI) including operational characteristics and the effects of both a radiation and non-radiation environment. Part 2 satisfies the requirement for RPI equipment as regards the overall design, the availability, the reliability, the information display, the human factors, the power supplies, the manufacture and quality assurance, the testing and the cost. Part 3 deals with the supply, location and operation of the RPI equipment. (U.K.)

  17. Code of practice and design principles for installed radiological protection systems

    International Nuclear Information System (INIS)

    Powell, R.G.

    1979-03-01

    For some years there has been comprehensive guidance documentation for Nuclear Reactor Instrumentation, but apparently no corresponding guide for designers and installers of Radiological Protection Instrumentation. A small group of instrumentation engineers discussed this lack of a suitable guide, and they examined the main points on which it should be based. This document attempts to present a comprehensive and detailed review of these points. It is intended to give an overall coverage and serve as a reference document for specific points; it should also be of value to the newcomer to the Radiological Protection Instrumentation field. This Code of Practice represents a standard of good practice and takes the form of recommendations only. Each installation must be assessed individually, and agreement on its suitability must be reached locally by the designers and the officers responsible for safety and operation. (author)

  18. Code of Practice on Radiation Protection in the Mining and Processing of Mineral Sands (1982) (Western Australia)

    International Nuclear Information System (INIS)

    1982-01-01

    This Code establishes radiation safety practices for the mineral sands industry in Western Australia. The Code prescribes, not only for operators and managers of mines and processing plants but for their employees as well, certain duties designed to ensure that radiation exposure is kept as low as reasonably practicable. The Code further provides for the management of wastes, again with a view to keeping contaminant concentrations and dose rates within specified levels. Finally, provision is made for the rehabilitation of those sites in which mining or processing operations have ceased by restoring the areas to designated average radiation levels. (NEA) [fr

  19. International symposium on standards and codes of practice in medical radiation dosimetry. Book of extended synopses

    International Nuclear Information System (INIS)

    2002-01-01

    The development of radiation measurement standards by National Metrology Institutes (NMIs) and their dissemination to Secondary Standard Dosimetry Laboratories (SSDLs), cancer therapy centres and hospitals represent essential aspects of the radiation dosimetry measurement chain. Although the demands for accuracy in radiotherapy initiated the establishment of such measurement chains, similar traceable dosimetry procedures have been implemented, or are being developed, in other areas of radiation medicine (e.g. diagnostic radiology and nuclear medicine), in radiation protection and in industrial applications of radiation. In the past few years the development of primary standards of absorbed dose to water in 60 Co for radiotherapy dosimetry has made direct calibrations in terms of absorbed dose to water available in many countries for the first time. Some laboratories have extended the development of these standards to high energy photon and electron beams and to low and medium energy x-ray beams. Other countries, however, still base their dosimetry for radiotherapy on air kerma standards. Dosimetry for conventional external beam radiotherapy was probably the field where standardized procedures adopted by medical physicists at hospitals were developed first. Those were related to exposure and air kerma standards. The recent development of Codes of Practice (or protocols) based on the concept of absorbed dose to water has led to changes in calibration procedures at hospitals. The International Code of Practice for Dosimetry Based on Standards of Absorbed Dose to Water (TRS 398) was sponsored by the International Atomic Energy Agency (IAEA), World Health Organization (WHO), Pan-American Health Organization (PAHO) and the European Society for Therapeutic Radiology and Oncology (ESTRO) and is expected to be adopted in many countries worldwide. It provides recommendations for the dosimetry of all types of beams (except neutrons) used in external radiotherapy and satisfies

  20. International symposium on standards and codes of practice in medical radiation dosimetry. Book of extended synopses

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    The development of radiation measurement standards by National Metrology Institutes (NMIs) and their dissemination to Secondary Standard Dosimetry Laboratories (SSDLs), cancer therapy centres and hospitals represent essential aspects of the radiation dosimetry measurement chain. Although the demands for accuracy in radiotherapy initiated the establishment of such measurement chains, similar traceable dosimetry procedures have been implemented, or are being developed, in other areas of radiation medicine (e.g. diagnostic radiology and nuclear medicine), in radiation protection and in industrial applications of radiation. In the past few years the development of primary standards of absorbed dose to water in {sup 60}Co for radiotherapy dosimetry has made direct calibrations in terms of absorbed dose to water available in many countries for the first time. Some laboratories have extended the development of these standards to high energy photon and electron beams and to low and medium energy x-ray beams. Other countries, however, still base their dosimetry for radiotherapy on air kerma standards. Dosimetry for conventional external beam radiotherapy was probably the field where standardized procedures adopted by medical physicists at hospitals were developed first. Those were related to exposure and air kerma standards. The recent development of Codes of Practice (or protocols) based on the concept of absorbed dose to water has led to changes in calibration procedures at hospitals. The International Code of Practice for Dosimetry Based on Standards of Absorbed Dose to Water (TRS 398) was sponsored by the International Atomic Energy Agency (IAEA), World Health Organization (WHO), Pan-American Health Organization (PAHO) and the European Society for Therapeutic Radiology and Oncology (ESTRO) and is expected to be adopted in many countries worldwide. It provides recommendations for the dosimetry of all types of beams (except neutrons) used in external radiotherapy and

  1. Views of Evidence-Based Practice: Social Workers' Code of Ethics and Accreditation Standards as Guides for Choice

    Science.gov (United States)

    Gambrill, Eileen

    2007-01-01

    Different views of evidence-based practice (EBP) include defining it as the use of empirically-validated treatments and practice guidelines (i.e., the EBPs approach) in contrast to the broad philosophy and related evolving process described by the originators. Social workers can draw on their code of ethics and accreditation standards both to…

  2. A Finnish national code of practice for reference dosimetry of radiation therapy

    International Nuclear Information System (INIS)

    Kosunen, A.; Sipilae, P.; Jaervinen, H.; Parkkinen, R.; Jokelainen, I.

    2002-01-01

    Full text: A national Code of Practice (CoP) for reference dosimetry of radiation therapy in Finland will be established during 2002 and will be implemented from the beginning of 2003. The CoP will cover dosimetry of the conventional radiotherapy modalities used in Finland i.e. external radiotherapy with megavoltage photon and electron beams, external radiotherapy with low energy kilovoltage X-ray beams and brachytherapy. The formalisms for external radiation beam dosimetry are those of TRS 389. For brachytherapy the formalism will follow the general guidelines of TECDOC-1274. The CoP will be prepared by the SSDL of STUK in close co-operation with the Finnish radiotherapy physicists. For external beam radiotherapy, the main objective of the national Code of Practice for radiation therapy dosimetry is to maintain the achieved good level of consistency of the dosimetry procedures in external beam radiotherapy as the 'absorbed dose to water' based approach of TRS 389 is implemented in Finland. In the CoP the dosimetry the procedures are described for the whole dosimetry chain starting from the calibration of the ionisation chambers at the SSDL of STUK and ending to the calibration of the beam monitor ionisation chamber of a linear accelerator. For brachytherapy dosimetry the aim is to fix the national practice for reference air kerma rate calibrations both for radioactive sources and for well-type ionisation chambers. Although the dosimetry procedures are described independently of the SSDL service, CoP makes use of the special features of the calibration service offered by the SSDL of STUK. For ionisation chambers used for photon dosimetry the calibration factors for the user measurement chain are given not only for the actual reference beam quality ( 60 Co) but also for a set of user beam qualities. Furthermore, SSDL of STUK offers calibration services for plane parallel ionisation chambers in an electron beam of a user linac. For brachytherapy SSDL of STUK has

  3. Code of Practice for Protection Against Ionizing Radiation Emitted from X-ray Analysis Equipment (1984)

    International Nuclear Information System (INIS)

    1984-01-01

    Appropriate working rules, safety features and monitoring requirements for general X-ray analysis units or equipment are laid down in this Code which is intended for users of such equipment. The Code advises that establishments draw up their own working procedures based on appropriate legislation and on the recommendations contained in this Code. The Code also describes the requirements for X-ray analysis equipment necessary to ensure safety. (NEA) [fr

  4. Development of European creep crack growth testing code of practice for industrial specimens

    Energy Technology Data Exchange (ETDEWEB)

    Dogan, B.; Nikbin, K. [Imperial College, London (United Kingdom); Petrovski, B. [Technische Univ. Darmstadt (DE). Inst. fuer Werkstoffkunde (IFW)

    2004-07-01

    The integrity and residual life assessment of high temperature components require defects, detected or assumed to exist, through minimum allowable limits of detectable flaws using nondestructive testing methods. It relies on information obtained from the material's mechanical, uniaxial creep, creep crack initiation and growth properties. The information derived from experiments needs to be validated and harmonised following a Code of Practice that data variability between different institutions can be reduced to a minimum. The present paper reports on a Code of Practice (CoP) being prepared within the framework of the partially European Commission funded project CRETE. The novel aspect of the presented CoP is the inclusion of component relevant industrial specimen geometries. It covers testing and analysis of Creep Crack growth (CCG) in metallic materials at elevated temperature using six different cracked geometries that have been validated in. It aims to give advice on testing, measurements and analysis of creep crack growth data for a range of creep brittle to creep ductile materials using component service relevant specimen geometries and sizes. The CoP may be used for material selection criteria and inspection requirements for damage tolerant applications. In quantitative terms, these types of tests can be used to assess the individual and combined effects of metallurgical, fabrication, operating temperature, and loading conditions on creep crack growth life. Further issues will be addressed including material properties, damage and crack growth related constraint effect, stress relaxation and stress-strain fields, residual stresses, partitioning displacement, analysis of elasticcreep, elastic compliance measurements.

  5. Code of Ethics

    Science.gov (United States)

    Division for Early Childhood, Council for Exceptional Children, 2009

    2009-01-01

    The Code of Ethics of the Division for Early Childhood (DEC) of the Council for Exceptional Children is a public statement of principles and practice guidelines supported by the mission of DEC. The foundation of this Code is based on sound ethical reasoning related to professional practice with young children with disabilities and their families…

  6. Codes of Journalism Ethics in Russia and the United States: Traditions and the Current Practice of Application

    OpenAIRE

    Bykov, Aleksei Yuryevich; Georgieva, Elena Savova; Danilova, Yuliya Sokratovna; Baychik, Anna Vitalyevna

    2016-01-01

    The purpose of the article is to identify the main categories stated in the codes of journalism ethics in Russia and the United States, as well as the principles of their practical application. As a part of the comparative analysis of the codes of the journalism organizations of the two countries, we identify factors affecting the adoption and contents of the documents and the approaches to the regulation of different areas of professional activity which were reflected in these documents. The...

  7. Increasing Trend of Fatal Falls in Older Adults in the United States, 1992 to 2005: Coding Practice or Reporting Quality?

    Science.gov (United States)

    Kharrazi, Rebekah J; Nash, Denis; Mielenz, Thelma J

    2015-09-01

    To investigate whether changes in death certificate coding and reporting practices explain part or all of the recent increase in the rate of fatal falls in adults aged 65 and older in the United States. Trends in coding and reporting practices of fatal falls were evaluated under mortality coding schemes for International Classification of Diseases (ICD), Ninth Revision (1992-1998) and Tenth Revision (1999-2005). United States, 1992 to 2005. Individuals aged 65 and older with falls listed as the underlying cause of death (UCD) on their death certificates. The primary outcome was annual fatal falls rates per 100,000 U.S. residents aged 65 and older. Coding practice was assessed through analysis of trends in rates of specific UCD fall ICD e-codes over time. Reporting quality was assessed by examining changes in the location on the death certificate where fall e-codes were reported, in particular, the percentage of fall e-codes recorded in the proper location on the death certificate. Fatal falls rates increased over both time periods: 1992 to 1998 and 1999 to 2005. A single falls e-code was responsible for the increasing trend of fatal falls overall from 1992 to 1998 (E888, other and unspecified fall) and from 1999 to 2005 (W18, other falls on the same level), whereas trends for other falls e-codes remained stable. Reporting quality improved steadily throughout the study period. Better reporting quality, not coding practices, contributed to the increasing rate of fatal falls in older adults in the United States from 1992 to 2005. © 2015, Copyright the Authors Journal compilation © 2015, The American Geriatrics Society.

  8. Code of Practice for the Protection of Persons against Ionizing Radiations arising from Medical and Dental Use

    Energy Technology Data Exchange (ETDEWEB)

    1972-01-01

    This Code is a revision of the 1964 Code of Practice for the protection of persons against ionizing radiations arising from medical and dental use. This revised Code (which does not have the force of law) applies to the use of ionizing radiations arising from all forms of medical and dental practice and from allied research involving human subjects. It covers both workers, patients and members of the public. Although the arrangements recommended relate primarily to institutions they should be applied, as far as possible, by all medical and dental practitioners. The Code has been drawn up in the light of the recommendations of the International Commission on Radiological Protection (ICRP) and of the views of the Medical Research Council's Committee on Protection against Ionizing Radiations.

  9. Code of Practice for the Protection of Persons against Ionizing Radiations arising from Medical and Dental Use

    International Nuclear Information System (INIS)

    1972-01-01

    This Code is a revision of the 1964 Code of Practice for the protection of persons against ionizing radiations arising from medical and dental use. This revised Code (which does not have the force of law) applies to the use of ionizing radiations arising from all forms of medical and dental practice and from allied research involving human subjects. It covers both workers, patients and members of the public. Although the arrangements recommended relate primarily to institutions they should be applied, as far as possible, by all medical and dental practitioners. The Code has been drawn up in the light of the recommendations of the International Commission on Radiological Protection (ICRP) and of the views of the Medical Research Council's Committee on Protection against Ionizing Radiations. (NEA) [fr

  10. Code of practice and design principles, for installed radiological protection systems

    International Nuclear Information System (INIS)

    Powell, R.G.

    1980-09-01

    The main points on which a guide for designers and installers of radiological protection instrumentation (RPI) should be based have been examined by a small group of instrumentation engineers. The purpose of this document is to present a comprehensive and detailed review of these points. It is intended to give an overall coverage and serve as a reference document for specific points; it should also be of value to newcomers to the RPI field. The code presents a standard of good practice and takes the form of recommendations only. The contents cover: the requirement for RPI; design, availability and reliability, information displays, human factors, power supplies, manufacture, quality assurance, testing, cost, installation, operation, maintenance and documentation. Appendices include: Radon and thoron decay series, air sampling, reliability of component combinations and redundancy. (28 references). (author)

  11. Towards a European draft code of practice in creep crack growth testing

    International Nuclear Information System (INIS)

    Nikbin, K.M.

    2003-01-01

    Crack growth and initiation models as well as defect assessment codes need reliable and verifiable material properties data for use in their predictive methodologies. These data consist of uniaxial, multiaxial and crack initiation and growth data under static and cyclic loading at the relevant temperatures. International collaboration for developing standards in this field started in 1987 under the auspices of the VAMAS (Versailles Agreement for MAterials and Standards). Two technical Working Areas TWA11 and TWA19 committees ending 1998 have made substantial progress in unifying and standardising the methods for obtaining the relevant data. This collaboration has resulted in the development of ASTM E1457 creep crack growth testing standard. The European collaborative programme CRETE (see Acknowledgements), which began in 1999, is following up this valuable research in order to develop a European Code of Practice for elevated temperature crack growth which is planned to have a wider field of application. A Round Robin experimental, analytical and verification programme in CRETE will include testing a type 316 LN stainless steel at 550 degC and a Carbon-Manganese steel at 400 degC consisting of seven different geometries. The paper reviews the methods of analysis used for laboratory creep crack growth data and their relevance to long term crack initiation and growth in components. In addition, since design and life assessment and material properties under creep are an integral part of this project a short review of the models available for predicting creep and fatigue crack growth is presented. (author)

  12. Effective coding with VHDL principles and best practice

    CERN Document Server

    Jasinski, Ricardo

    2016-01-01

    A guide to applying software design principles and coding practices to VHDL to improve the readability, maintainability, and quality of VHDL code. This book addresses an often-neglected aspect of the creation of VHDL designs. A VHDL description is also source code, and VHDL designers can use the best practices of software development to write high-quality code and to organize it in a design. This book presents this unique set of skills, teaching VHDL designers of all experience levels how to apply the best design principles and coding practices from the software world to the world of hardware. The concepts introduced here will help readers write code that is easier to understand and more likely to be correct, with improved readability, maintainability, and overall quality. After a brief review of VHDL, the book presents fundamental design principles for writing code, discussing such topics as design, quality, architecture, modularity, abstraction, and hierarchy. Building on these concepts, the book then int...

  13. Code of Practice for the safe transport of radioactive substances 1990

    International Nuclear Information System (INIS)

    1990-01-01

    This Federal Code revises an earlier Code on the same subject issued in 1982 and was formulated under the Environment Protection (Nuclear Codes) Act 1978. The purpose of the Code is to establish uniform safety standards, applicable throughout the Commonwealth of Australia, to provide for the protection of persons and the environment, against any dangers associated with the transport of radioactive substances. The Code uses as a basis the IAEA Regulations for the Safe Transport of Radioactive Materials. This new edition takes into account the 1985 Edition of the Regulations incorporating the 1988 Supplement and provides, furthermore, that radiation protection standards will also be subject to recommendations of the Australian National Health and Medical Research Council [fr

  14. Coding practice of the Journal Article Tag Suite extensible markup language

    Directory of Open Access Journals (Sweden)

    Sun Huh

    2014-08-01

    Full Text Available In general, the Journal Article Tag Suite (JATS extensible markup language (XML coding is processed automatically by an XML filtering program. In this article, the basic tagging in JATS is explained in terms of coding practice. A text editor that supports UTF-8 encoding is necessary to input JATS XML data that works in every language. Any character representable in Unicode can be used in JATS XML, and commonly available web browsers can be used to view JATS XML files. JATS XML files can refer to document type definitions, extensible stylesheet language files, and cascading style sheets, but they must specify the locations of those files. Tools for validating JATS XML files are available via the web sites of PubMed Central and ScienceCentral. Once these files are uploaded to a web server, they can be accessed from all over the world by anyone with a browser. Encoding an example article in JATS XML may help editors in deciding on the adoption of JATS XML.

  15. The Norwegian system for implementing the IAEA code of practice based on absorbed dose to water

    International Nuclear Information System (INIS)

    Bjerke, H.

    2002-01-01

    The Norwegian Radiation Protection Authority (NRPA) SSDL recommended in 2000 the use of absorbed dose to water as the quality for calibration and code of practice in radiotherapy. The absorbed dose to water standard traceable to BIPM was established in Norway in 1995. The international code of practice, IAEA TRS 398 was under preparation. As a part of the implementation of the new dosimetry system the SSDL went to radiotherapy departments in Norway in 2001. The aim of the visit was to: Prepare and support the users in the implementation of TRS 398 by teaching, discussions and measurements on-site; Gain experience for NRPA in the practical implementation of TRS 398 and perform comparisons between TRS 277 and TRS 398 for different beam qualities; Report experience from implementation of TRS 398 to IAEA. The NRPA 30x30x30 cm 3 water phantom is equal to the BIPM calibration phantom. This was used for the photon measurements in 16 different beams. NRPA used three chambers: NE 2571, NE 2611 and PR06C for the photon measurements. As a quality control the set-up was compared with the Finnish site-visit equipment at University Hospital of Helsinki, and the measured absorbed dose to water agreed within 0.6%. The Finnish SSDL calibrated the Norwegian chambers and the absorbed dose to water calibration factors given by the two SSDLs for the three chambers agreed within 0.3%. The local clinical dosimetry in Norway was based on TRS 277. For the site-visit the absorbed dose to water was determined by NRPA using own equipment including the three chambers and the hospitals reference chamber. The hospital determined the dose the same evening using their local equipment. For the 16 photon beams the deviations between the two absorbed dose to water determinations for TRS 277 were in the range -1,7% to +4.0%. The uncertainty in the measurements was 1% (k=1). The deviation was explained in local implementation of TRS 277, the use of plastic phantoms, no resent calibration of

  16. The role of the IAEA codes of practice in the radiation dosimetry dissemination chain

    International Nuclear Information System (INIS)

    Andreo, P.

    2002-01-01

    Full text: More than 30 years ago the International Atomic Energy Agency (IAEA) published on behalf of IAEA, WHO and PAHO its first Code of Practice (CoP) for radiotherapy dosimetry, TRS-110. Aimed at kV x-rays, 60 Co and 137 Cs therapy in developing countries, and based on roentgens and rads, 'old book' readers will still find interesting practical recommendations like QA procedures that include radiographs of the ionization chamber to check that the internal electrode construction has not moved. TRS-110 was also the first and only CoP with the distinction of including the name of the author in its cover, John B Massey, recognizing that IAEA acted solely as a publisher. For the following almost 20 years IAEA dosimetry activities have prioritized the development of a Network of Secondary Standard Dosimetry Laboratories (SSDLs). In addition to disseminating traceable radiation metrology standards, in some countries the SSDLs have played the important role of compensating the lack of qualified medical physicists. The balance between radiation metrology and medical physics has now shifted towards the first area and the IAEA recommends that SSDLs should not perform the duties of medical physicists except in dire situations. During this long period, there were no updates of TRS-110 or a new IAEA CoP published, even if different generations of national dosimetry protocols had emerged. The absence of IAEA recommendations favoured the arbitrary use of such national protocols, mostly issued in UK and USA, with the result that multiple protocols were used within a given country and there were no practical links between medical physics and SSDLs except for detector calibrations. The publication in 1987 of the TRS-277 Code of Practice established a quantum leap with regard to the Agency's role in harmonizing international radiotherapy dosimetry. A new generation of N K -based national protocols had emerged in the early eighties, and the authors of TRS-277 were chosen among

  17. Code of safe practice for the use of x-rays in podiatry

    International Nuclear Information System (INIS)

    1990-02-01

    The purpose of this code which applies to podiatric diagnostic use of x-rays is to provide criteria for working procedures, x-ray equipment and protective materials necessary for the use of x-rays in podiatric diagnosis according to currently accepted standards of safety. Conformity with this code may be taken as a primary indication of compliance with radiation protection legislation. 5 refs

  18. Evaluation of an Online Instructional Database Accessed by QR Codes to Support Biochemistry Practical Laboratory Classes

    Science.gov (United States)

    Yip, Tor; Melling, Louise; Shaw, Kirsty J.

    2016-01-01

    An online instructional database containing information on commonly used pieces of laboratory equipment was created. In order to make the database highly accessible and to promote its use, QR codes were utilized. The instructional materials were available anytime and accessed using QR codes located on the equipment itself and within undergraduate…

  19. Codes of practice and protocols for the dosimetry in reference conditions of proton and ion beams

    International Nuclear Information System (INIS)

    Vatnitsky, S.; Andreo, P.

    2002-01-01

    The advantages of radiotherapy protons and heavier charged-particle beams, the technological feasibility, and the clinical results obtained so far have led to the establishment of about 20 treatment facilities worldwide and plans to open another 20 proton and light-ion therapy centres in the next five years. In order to meet the expanding capabilities of treatment techniques, considerable effort has been devoted during the last fifteen years to the development of the dosimetry and calibration of such beams. This paper reviews these developments and summarizes the present status of Codes of Practice and protocols for the dosimetry in reference conditions of proton and ion beams. The first dosimetry protocol for heavy-particle radiotherapy beams, AAPM TG 20, was based on the use of Faraday cups and calorimeters, whereas ionization chamber dosimetry received little attention. Following the trends in 'nuclear particle' radiotherapy, TG 20 included recommendations for specifying 'dose to tissue'. The lack of availability of a harmonized set of data for the different particles made this protocol to include data for stopping-powers and for the mean energy required to produce and ion pair in air, W air , from multiple authors, without enough attention being paid to their consistency. The increased focus into proton beams was materialized in the publication of the ECHED Code of Practice, dedicated exclusively to protons, where ionization dosimetry received more attention than in TG 20. It was not until the publication of the Supplement to the ECHED recommendations that ionization chambers having a 60 CO calibration factor were recommended as a reference detector for proton dosimetry, and data supplied for chambers with different wall materials. The emphasis on ionization chamber-based proton dosimetry was complemented with a recommendation for using water as dosimetry phantom material and the necessary data on tissue and water to air stopping-power ratios and W air . One of

  20. 76 FR 77237 - U.S. National Authority for the WHO Global Code of Practice on the International Recruitment of...

    Science.gov (United States)

    2011-12-12

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration U.S. National Authority for the WHO Global Code of Practice on the International Recruitment of Health Personnel; Notice of Public Meeting AGENCY: Health Resources and Services Administration, HHS; Office of Global Affairs...

  1. Modification of an x-ray diffraction unit to comply with the NH and MRC code of practice

    International Nuclear Information System (INIS)

    Ibbetson, V.J.; Young, J.G.

    2004-01-01

    X-ray analysis units are commonly used in research and industrial laboratories throughout Australia. Despite a well-established Code of Practice and working protocols for the safe use of such units, there are all too many stories of users by-passing safety features significantly increasing the risk of accidental exposure to the primary X-ray beam. Since the output of such units may be as high as 300 Gy x s 1 , such accidental exposures could have very serious consequences. Australian Radiation Services Pty Ltd undertook a compliance audit of an X-ray diffraction unit with respect to the NH and MRC Code of Practice for protection against ionising radiation emitted from X-ray analysis equipment. This paper discusses the findings from the initial inspection and the modifications recommended for the XRD unit to ensure compliance with the Code, without unnecessarily restricting its use. Copyright (2004) Australasian Radiation Protection Society Inc

  2. Best practice in the management of clinical coding services: Insights from a project in the Republic of Ireland, Part 2.

    Science.gov (United States)

    Reid, Beth A; Ridoutt, Lee; O'Connor, Paul; Murphy, Deirdre

    2017-09-01

    This is the second of two articles about best practice in the management of coding services. The best practice project was part of a year-long project conducted in the Republic of Ireland to review the quality of the Hospital Inpatient Enquiry data for its use in activity-based funding. The four methods used to address the best practice aspect of the project were described in detail in Part 1. The results included in this article are those relating to the coding manager's background, preparation and style, clinical coder (CC) workforce adequacy, the CC workforce structure and career pathway, and the physical and psychological work environment for the clinical coding service. Examples of best practice were found in the study hospitals but there were also areas for improvement. Coding managers would benefit from greater support in the form of increased opportunities for management training and a better method for calculating CC workforce numbers. A career pathway is needed for CCs to progress from entry to expert CC, mentor, manager and quality controller. Most hospitals could benefit from investment in infrastructure that places CCs in a physical environment that tells them they are an important part of the hospital and their work is valued.

  3. Diabetes Mellitus Coding Training for Family Practice Residents.

    Science.gov (United States)

    Urse, Geraldine N

    2015-07-01

    Although physicians regularly use numeric coding systems such as the International Classification of Diseases, Ninth Revision, Clinical Modification (ICD-9-CM) to describe patient encounters, coding errors are common. One of the most complicated diagnoses to code is diabetes mellitus. The ICD-9-CM currently has 39 separate codes for diabetes mellitus; this number will be expanded to more than 50 with the introduction of ICD-10-CM in October 2015. To assess the effect of a 1-hour focused presentation on ICD-9-CM codes on diabetes mellitus coding. A 1-hour focused lecture on the correct use of diabetes mellitus codes for patient visits was presented to family practice residents at Doctors Hospital Family Practice in Columbus, Ohio. To assess resident knowledge of the topic, a pretest and posttest were given to residents before and after the lecture, respectively. Medical records of all patients with diabetes mellitus who were cared for at the hospital 6 weeks before and 6 weeks after the lecture were reviewed and compared for the use of diabetes mellitus ICD-9 codes. Eighteen residents attended the lecture and completed the pretest and posttest. The mean (SD) percentage of correct answers was 72.8% (17.1%) for the pretest and 84.4% (14.6%) for the posttest, for an improvement of 11.6 percentage points (P≤.035). The percentage of total available codes used did not substantially change from before to after the lecture, but the use of the generic ICD-9-CM code for diabetes mellitus type II controlled (250.00) declined (58 of 176 [33%] to 102 of 393 [26%]) and the use of other codes increased, indicating a greater variety in codes used after the focused lecture. After a focused lecture on diabetes mellitus coding, resident coding knowledge improved. Review of medical record data did not reveal an overall change in the number of diabetic codes used after the lecture but did reveal a greater variety in the codes used.

  4. Radiation sterilization of tissue allografts: Requirements for validation and routine control. A code of practice

    International Nuclear Information System (INIS)

    2007-12-01

    These recommendations for the radiation sterilization of tissue allografts adopt the principles that the International Organization for Standardization (ISO) applies to the radiation sterilization of health care products. The approach has been adapted to take into account the special features associated with human tissues and the features that distinguish them from industrially produced sterile health care products. The approach as described here is not applicable if viral contamination is identified. Thus it is emphasized that the human donors of the tissues must be medically and serologically screened. To further support this screening it is recommended that autopsy reports be reviewed if available. This adaptation of established ISO methods can thus only be applied to sterilization of tissue allografts if the radiation sterilization described here is the terminal stage of a careful, detailed, documented sequence of procedures involving: donor selection; tissue retrieval; tissue banking general procedures; specific processing procedures; labelling; and distribution. The methods proposed here for the establishment of a sterilization dose are based on statistical approaches used for the sterilization of health care products and modified appropriately for the low numbers of tissue allograft samples typically available. This code of practice will be useful to tissue banking staff, surgeons using tissues for transplantation, regulators who oversee the safety of transplantation and radiation sterilization procedures, members of tissue banking associations, health service personnel in hospitals in which tissue transplantations are performed and inter-governmental organizations involved in transplantation issues, for example the World Health Organization. This publication was discussed extensively at an international meeting in Wrexham in the United Kingdom and was approved by the Technical Advisory Committee of the relevant IAEA project, which included the Chairpersons

  5. THEORETICAL AND PRACTICAL APPROACHES REGARDING THE ADOPTION OF CORPORATE GOVERNANCE CODES

    OpenAIRE

    Sorin Nicolae Borlea; Monica-Violeta Achim; Ludovica Breban

    2013-01-01

    In the European Union, the concept of corporate governance began to emerge more clearly after 1997, when most countries have however, voluntarily adopted corporate governance codes. The impulse of adopting these codes consists in the financial scandals related to the failure of the British companies listed on the stock exchange. Numerous scandals involving big companies such as Enron, WorldCom, Parmalat, Xerox, Merrill Lynch, Andersen and so on, conduct to a lack of investors’ confidence. ...

  6. European Model Code of safe practice in the storage and handling of petroleum products. Part I. Operations

    Energy Technology Data Exchange (ETDEWEB)

    1973-01-01

    This safe practice code was prepared by a working group consisting of experts from 10 Western European countries. It consists of short guidelines and technical advice on general precautions, injuries and medical services, permits to work, fire prevention and fighting, jetties, pipework, storage tanks, static electricity, electrical equipment, road vehicles, tank cars, handling of bitumen products, liquefied petroleum gases, packed products and training of personnel. The code is supplemented by 10 appendices, including a suggested syllabus for a 2-day course on fire prevention and emergency action for managers of oil installations.

  7. Radiation protection of workers in the mining and milling of radioactive ores. Code of practice and technical addendum. 1983 ed

    International Nuclear Information System (INIS)

    1983-01-01

    This Code of Practice sets forth the means of ensuring protection against ionizing radiation for workers engaged in mining and milling of radioactive ores: general provisions outlining the responsibilities of the employer and the worker, limits of radiation exposure, administrative organization of radiation protection, radiation surveillance, engineering and administrative protective measures and medical surveillance. It is designed to facilitate the preparation and adoption of national and local regulations and factory rules for radiation protection in mining and milling of radioactive ores.

  8. A code of practice for use in biomedical research involving the irradiation of employees of the UKAEA

    International Nuclear Information System (INIS)

    Morgan, A.; Foord, N.

    1976-08-01

    Volunteers have been used in biomedical studies are AERE Harwell since 1964. The procedures to be followed by investigators and the responsibilities of the Head of Environmental and Medical Sciences Division of the Chief of Medical Services were described in the minutes of the inaugural meeting of the Inhalation Studies and Approval Committee. Recently, these procedures have been reviewed and to make then readily available are summarised in this Code of Practice. (author)

  9. Challenges to implementation of the WHO Global Code of Practice on International Recruitment of Health Personnel: the case of Sudan.

    Science.gov (United States)

    Abuagla, Ayat; Badr, Elsheikh

    2016-06-30

    The WHO Global Code of Practice on the International Recruitment of Health Personnel (hereafter the WHO Code) was adopted by the World Health Assembly in 2010 as a voluntary instrument to address challenges of health worker migration worldwide. To ascertain its relevance and effectiveness, the implementation of the WHO Code needs to be assessed based on country experience; hence, this case study on Sudan. This qualitative study depended mainly on documentary sources in addition to key informant interviews. Experiences of the authors has informed the analysis. Migration of Sudanese health workers represents a major health system challenge. Over half of Sudanese physicians practice abroad and new trends are showing involvement of other professions and increased feminization. Traditional destinations include Gulf States, especially Saudi Arabia and Libya, as well as the United Kingdom and the Republic of Ireland. Low salaries, poor work environment, and a lack of adequate professional development are the leading push factors. Massive emigration of skilled health workers has jeopardized coverage and quality of healthcare and health professional education. Poor evidence, lack of a national policy, and active recruitment in addition to labour market problems were barriers for effective migration management in Sudan. Response of destination countries in relation to cooperative arrangements with Sudan as a source country has always been suboptimal, demonstrating less attention to solidarity and ethical dimensions. The WHO Code boosted Sudan's efforts to address health worker migration and health workforce development in general. Improving migration evidence, fostering a national dialogue, and promoting bilateral agreements in addition to catalysing health worker retention strategies are some of the benefits accrued. There are, however, limitations in publicity of the WHO Code and its incorporation into national laws and regulatory frameworks for ethical recruitment. The

  10. TOWARDS ENERGY-AWARE CODING PRACTICES FOR ANDROID

    Directory of Open Access Journals (Sweden)

    João SARAIVA

    2018-03-01

    Full Text Available This paper studies how the use of different coding practices when developing Android applications influence energy consumption. We consider two common Java/Android programming practices, namely string operations and (non cached image loading, and we show the energy profile of different coding practices for doing them. With string operations, we compare the performance of the usage of the standard String class to the usage of the StringBuilder class, while with our second practice we evaluate the benefits of image caching with asynchronous loading. We externally measure energy consumption of the example applications using the Trepn profiler application by Qualcomm. Our preliminary results show that selected coding practices do significantly affect energy consumption, in the particular cases of our practice selection, this difference varies between 20% and 50%.

  11. The Teaching of the Code of Ethics and Standard Practices for Texas Educator Preparation Programs

    Science.gov (United States)

    Davenport, Marvin; Thompson, J. Ray; Templeton, Nathan R.

    2015-01-01

    The purpose of this descriptive quantitative research study was to answer three basic informational questions: (1) To what extent ethics training, as stipulated in Texas Administrative Code Chapter 247, was included in the EPP curriculum; (2) To what extent Texas public universities with approved EPP programs provided faculty opportunities for…

  12. On Code Parameters and Coding Vector Representation for Practical RLNC

    DEFF Research Database (Denmark)

    Heide, Janus; Pedersen, Morten Videbæk; Fitzek, Frank

    2011-01-01

    RLNC provides a theoretically efficient method for coding. The drawbacks associated with it are the complexity of the decoding and the overhead resulting from the encoding vector. Increasing the field size and generation size presents a fundamental trade-off between packet-based throughput...... to higher energy consumption. Therefore, the optimal trade-off is system and topology dependent, as it depends on the cost in energy of performing coding operations versus transmitting data. We show that moderate field sizes are the correct choice when trade-offs are considered. The results show that sparse...

  13. Code of practice for the control and safe handling of radioactive sources used for therapeutic purposes (1988)

    International Nuclear Information System (INIS)

    1988-01-01

    This Code is intended as a guide to safe practices in the use of sealed and unsealed radioactive sources and in the management of patients being treated with them. It covers the procedures for the handling, preparation and use of radioactive sources, precautions to be taken for patients undergoing treatment, storage and transport of radioactive sources within a hospital or clinic, and routine testing of sealed sources [fr

  14. Code of practice for the design and safe operation of non-medical irradiation facilities (1988)

    International Nuclear Information System (INIS)

    1988-01-01

    This Code establishes requirements for the design and operation of irradiation facilities which use X-rays, electrons or gamma radiation for non-medical purposes such as the sterilisation of therapeutic goods. These requirements aim to ensure that exposure of workers and members of the public to ionizing and non-ionizing radiation as well as to noxious gases and radioactive contamination of the environment and facilities are controlled through the design of engineering safety features, approved administrative controls and appropriate radiation monitoring [fr

  15. Code of practice on quality assurance for safety in nuclear power plants

    International Nuclear Information System (INIS)

    1988-01-01

    The code sets forth the management principles and objectives to be met during the implementation of activities in different phases of the nuclear power plants (NPPs) for assuring safety. It is intended for use by organisations and individuals responsible for safety related functions in design, manufacturing, construction, commissioning, operation and decommissioning of NPPs. It covers the functions of management, performance, verification and corrective action. It also deals with the quality assurance records. (M.G.B.)

  16. Experiences using IAEA Code of practice for radiation sterilization of tissue allografts: Validation and routine control

    Energy Technology Data Exchange (ETDEWEB)

    Hilmy, N. [Batan Research Tissue Bank (BRTB), Centre for Research and Development of Isotopes and Radiation Technology, P.O. Box 7002, JKSKL, Jakarta 12070 (Indonesia)], E-mail: nazly@batan.go.id; Febrida, A.; Basril, A. [Batan Research Tissue Bank (BRTB), Centre for Research and Development of Isotopes and Radiation Technology, P.O. Box 7002, JKSKL, Jakarta 12070 (Indonesia)

    2007-11-15

    Problems of tissue allografts in using International Standard (ISO) 11137 for validation of radiation sterilization dose (RSD) are limited and low numbers of uniform samples per production batch, those are products obtained from one donor. Allograft is a graft transplanted between two different individuals of the same species. The minimum number of uniform samples needed for verification dose (VD) experiment at the selected sterility assurance level (SAL) per production batch according to the IAEA Code is 20, i.e., 10 for bio-burden determination and the remaining 10 for sterilization test. Three methods of the IAEA Code have been used for validation of RSD, i.e., method A1 that is a modification of method 1 of ISO 11137:1995, method B (ISO 13409:1996), and method C (AAMI TIR 27:2001). This paper describes VD experiments using uniform products obtained from one cadaver donor, i.e., cancellous bones, demineralized bone powders and amnion grafts from one life donor. Results of the verification dose experiments show that RSD is 15.4 kGy for cancellous and demineralized bone grafts and 19.2 kGy for amnion grafts according to method A1 and 25 kGy according to methods B and C.

  17. Code of practice for the release of hydrostatic test water from hydrostatic testing of petroleum liquid and gas pipelines

    International Nuclear Information System (INIS)

    1999-01-01

    This booklet describes a series of administrative procedures regarding the code of practice in Alberta for the release of hydrostatic test water from hydrostatic testing of petroleum liquid and gas pipelines. The topics covered include the registration process, the type and quality of water to use during the test, and the analytical methods to be used. Reporting schedule and record keeping information are also covered. Schedule 1 discusses the requirements for the release of hydrostatic test water to land, while Schedule 2 describes the requirements for the release of hydrostatic test water to receiving water. 3 tabs

  18. A test of the IAEA code of practice for absorbed dose determination in photon and electron beams

    International Nuclear Information System (INIS)

    Leitner, A.; Tiefenboeck, W.; Witzani, J.; Strachotinsky, C.

    1990-12-01

    The IAEA Code of Practice TRS 277 gives recommendations for absorbed dose determination in high energy photon and electron beams based on the use of ionisation chambers calibrated in terms of exposure or air kerma. The scope of the present work was to test the Code for 60 Co gamma radiation and for several radiation qualities at four different types of electron accelerators and to compare the ionisation chamber dosimetry with ferrous sulphate dosimetry. The results show agreement between the two methods within about one per cent for all the investigated qualities. In addition the response of the TLD capsules of the IAEA/WHO TL dosimetry service has been determined. (Authors) 5 refs., 9 tabs., 3 figs

  19. Drafting an Effective Ethical Code of Conduct for Professional Societies: A Practical Guide

    Directory of Open Access Journals (Sweden)

    Margaret C. Hardy

    2016-11-01

    Full Text Available Academic, medical, and research communities are struggling to quickly and effectively address unethical conduct within their professional ranks. Without a policy in place, individuals and institutes are subject to convoluted procedures and unnecessary consequences. In addition to policies geared to prevent harassment and assault, it is important to protect the ethical basis for research and provide a set of guidelines for how professionals treat each other, students, and trainees. Since drafting a policy of this nature is complex, 10 guidelines are provided as a framework for how to draft, implement, and establish an ethical code of conduct. Further implications for nonprofit societies and professional societies in particular are discussed.

  20. Interest of thermochemical data bases linked to complex equilibria calculation codes for practical applications

    International Nuclear Information System (INIS)

    Cenerino, G.; Marbeuf, A.; Vahlas, C.

    1992-01-01

    Since 1974, Thermodata has been working on developing an Integrated Information System in Inorganic Chemistry. A major effort was carried on the thermochemical data assessment of both pure substances and multicomponent solution phases. The available data bases are connected to powerful calculation codes (GEMINI = Gibbs Energy Minimizer), which allow to determine the thermodynamical equilibrium state in multicomponent systems. The high interest of such an approach is illustrated by recent applications in as various fields as semi-conductors, chemical vapor deposition, hard alloys and nuclear safety. (author). 26 refs., 6 figs

  1. Practical moral codes in the transgenic organism debate.

    Science.gov (United States)

    Cooley, D R; Goreham, Gary; Youngs, George A

    2004-01-01

    In one study funded by the United States Department of Agriculture, people from North Dakota were interviewed to discover which moral principles they use in evaluating the morality of transgenic organisms and their introduction into markets. It was found that although the moral codes the human subjects employed were very similar, their views on transgenics were vastly different. In this paper, the codes that were used by the respondents are developed, compared to that of the academically composed Belmont Report, and then modified to create the more practical Common Moral Code. At the end, it is shown that the Common Moral Code has inherent inconsistency flaws that might be resolvable, but would require extensive work on the definition of terms and principles. However, the effort is worthwhile, especially if it results in a common moral code that all those involved in the debate are willing to use in negotiating a resolution to their differences.

  2. 'Practice what you preach': Nurses' perspectives on the Code of Ethics and Service Pledge in five South African hospitals.

    Science.gov (United States)

    White, Janine; Phakoe, Maureen; Rispel, Laetitia C

    2015-01-01

    A recent focus of the global discourse on the health workforce has been on its quality, including the existence of codes of ethics. In South Africa, the importance of ethics and value systems in nursing was emphasised in the 2011 National Nursing Summit. The study explored hospital nurses' perceptions of the International Code of Ethics for Nurses; their perceptions of the South African Nurses' Pledge of Service; and their views on contemporary ethical practice. Following university ethics approval, the study was done at a convenience sample of five hospitals in two South African provinces. In each hospital, all day duty nurses in paediatric, maternity, adult medical, and adult surgical units were requested to complete a self-administered questionnaire. The questionnaire focused on their perceptions of the Code of Ethics and the Pledge, using a seven-point Likert scale. STATA(®) 13 and NVIVO 10 were used to analyse survey data and open-ended responses, respectively. The mean age of survey participants (n=69) was 39 years (SD=9.2), and the majority were female (96%). The majority agreed with a statement that they will promote the human rights of individuals (98%) and that they have a duty to meet the health and social needs of the public (96%). More nuanced responses were obtained for some questions, with 60% agreeing with a statement that too much emphasis is placed on patients' rights as opposed to nurses' rights and 32% agreeing with a statement that they would take part in strike action to improve nurses' salaries and working conditions. The dilemmas of nurses to uphold the Code of Ethics and the Pledge in face of workplace constraints or poor working conditions were revealed in nurses' responses to open-ended questions. Continuing education in ethics and addressing health system deficiencies will enhance nurses' professional development and their ethical decision-making and practice.

  3. KS 20322007 Near-Surface Disposal Radioactive Waste - Code Of Practice

    International Nuclear Information System (INIS)

    Omondi, C.

    2017-01-01

    To provide a basis for the near-surface disposal of solid radioactive waste to ensures that there is no unacceptable risk to humans, other biota or the environment. Near-Surface Disposal is the disposal of radioactive waste in below or above the natural ground surface, within app. 30 m. The code deals with management aspects associated with radioactive waste disposal only, and is not intended to cover issues related to the production and use of radionuclides. The objective of waste disposal is to isolate radioactive waste in order to ensure that there is no unacceptable health risk to humans and no long-term unacceptable effect to the environment. Radiation protection annual effective dose for exposure of members of the public should not exceed 1 mSv/year and occupational exposure of 20 mSv/year

  4. Ethical challenges in social media engagement and research: considerations for code of engagement practices.

    Science.gov (United States)

    Gehner, Monika; Oughton, Deborah

    2016-06-01

    Social media have great potential for effectively communicating about public health risks so people make healthier and safer choices. If used appropriately, social media can strengthen trust between the public and the institution. If used inappropriately, it may also create distrust. This note addresses some of the ethical challenges in using social media for communication and research. It reflects on opportunities in social media risk communication based on experience from the World Health Organization (WHO) and suggests a code of engagement be included in corporate social media policies that contain guidance as to what conduct is or is not appropriate with a view to maintaining public trust in the institution. The note concludes with considerations about the ethical use of social media in research, which is particularly relevant for entities communicating about ionizing radiation, including during emergency situations.

  5. Fundamentals of convolutional coding

    CERN Document Server

    Johannesson, Rolf

    2015-01-01

    Fundamentals of Convolutional Coding, Second Edition, regarded as a bible of convolutional coding brings you a clear and comprehensive discussion of the basic principles of this field * Two new chapters on low-density parity-check (LDPC) convolutional codes and iterative coding * Viterbi, BCJR, BEAST, list, and sequential decoding of convolutional codes * Distance properties of convolutional codes * Includes a downloadable solutions manual

  6. Implementation of the International Code of Practice on Dosimetry in Diagnostic Radiology (TRS 457): Review of Test Results

    International Nuclear Information System (INIS)

    2011-01-01

    In 2007, the IAEA published Dosimetry in Diagnostic Radiology: An International Code of Practice (IAEA Technical Reports Series No. 457). This publication recommends procedures for calibration and dosimetric measurement for the attainment of standardized dosimetry. It also addresses requirements both in standards dosimetry laboratories, especially Secondary Standards Dosimetry Laboratories (SSDLs), and in clinical centres for radiology, as found in most hospitals. The implementation of TRS No. 457 decreases the uncertainty in the dosimetry of diagnostic radiology beams and provides Member States with a unified and consistent framework for dosimetry in diagnostic radiology, which previously did not exist. A coordinated research project (CRP E2.10.06) was established in order to provide practical guidance to professionals at SSDLs and to clinical medical physicists on the implementation of TRS No. 457. This includes the calibration of radiological dosimetry instrumentation, the dissemination of calibration coefficients to clinical centres and the establishment of dosimetric measurement processes in clinical settings. The main goals of the CRP were to: Test the procedures recommended in TRS No. 457 for calibration of radiation detectors in different types of diagnostic beams and measuring instruments for varying diagnostic X ray modalities; Test the clinical dosimetry procedures, including the use of phantoms and patient dose surveys; Report on the practical implementation of TRS No. 457 at both SSDLs and hospital sites. Testing of TRS No. 457 was performed by a group of medical physicists from hospitals and SSDLs from various institutions worldwide

  7. The development of a code of practice for the environmental sound use of PFA as a fill

    Energy Technology Data Exchange (ETDEWEB)

    Coombs, R.; Sear, L.K.A. [National Power, Selby (United Kingdom). Quality Ash Association

    2000-07-01

    Although pulverised fuel ash (PFA) has been successfully used in a range of applications for many years there has always been need to give consideration to its environmental impact. The increasing awareness of environmental issues has had an impact on sales, with the need to assess its use on a site by site basis, the time taken to get approval for the use of PFA can exceed the time scales imposed by site operations. There has therefore been a need for an alternative approach to the problem. This paper details the approach at present being developed. This is a three-stage one with an initial assessment of the process, a review of existing data and what further data are required and finally a code of practice that recommends a rational approach to the use of PFA as a fill. 6 refs., 3 tabs.

  8. Automatic coding method of the ACR Code

    International Nuclear Information System (INIS)

    Park, Kwi Ae; Ihm, Jong Sool; Ahn, Woo Hyun; Baik, Seung Kook; Choi, Han Yong; Kim, Bong Gi

    1993-01-01

    The authors developed a computer program for automatic coding of ACR(American College of Radiology) code. The automatic coding of the ACR code is essential for computerization of the data in the department of radiology. This program was written in foxbase language and has been used for automatic coding of diagnosis in the Department of Radiology, Wallace Memorial Baptist since May 1992. The ACR dictionary files consisted of 11 files, one for the organ code and the others for the pathology code. The organ code was obtained by typing organ name or code number itself among the upper and lower level codes of the selected one that were simultaneous displayed on the screen. According to the first number of the selected organ code, the corresponding pathology code file was chosen automatically. By the similar fashion of organ code selection, the proper pathologic dode was obtained. An example of obtained ACR code is '131.3661'. This procedure was reproducible regardless of the number of fields of data. Because this program was written in 'User's Defined Function' from, decoding of the stored ACR code was achieved by this same program and incorporation of this program into program in to another data processing was possible. This program had merits of simple operation, accurate and detail coding, and easy adjustment for another program. Therefore, this program can be used for automation of routine work in the department of radiology

  9. Preventing another Chernobyl: codes, practices, and the role of new technology

    International Nuclear Information System (INIS)

    Egan, J.R.

    1988-01-01

    Preventative steps to prevent and mitigate the consequences of a nuclear accident are considered. The national and international legislation now available is mentioned elsewhere in the book. This chapter discusses the role of codes of conduct and personal agreements which could also prevent nuclear accidents. It is suggested that a radical departure from existing nuclear technology is needed. In particular some definite goals and objectives are suggested. The first is that there should be no meltdowns - all reactors must be physically incapable of core meltdown or explosion under any circumstances. This would mean no huge emergency evacuation plans, no need for expensive emergency core cooling systems. No spiralling cost overruns, no nuclear waste problem, no more huge reactors too big for national electrical systems, no military complications, no intractable decommissionings and no quality control problems are also given as goals. Some of these goals could be achieved with inherently safe reactor designs, much smaller reactors and factory assembly, rather than on-site construction. Other suggestions are also made to achieve the proposed new nuclear technology. (U.K.)

  10. A Practical View on Tunable Sparse Network Coding

    DEFF Research Database (Denmark)

    Sørensen, Chres Wiant; Shahbaz Badr, Arash; Cabrera Guerrero, Juan Alberto

    2015-01-01

    Tunable sparse network coding (TSNC) constitutes a promising concept for trading off computational complexity and delay performance. This paper advocates for the use of judicious feedback as a key not only to make TSNC practical, but also to deliver a highly consistent and controlled delay perfor...

  11. Prometheus: the implementation of clinical coding schemes in French routine general practice

    Directory of Open Access Journals (Sweden)

    Laurent Letrilliart

    2006-09-01

    Conclusions Coding health problems on a routine basis proved to be feasible. However, this process can be used on a more widespread basis and linked to other management data only if physicians are specially trained and rewarded, and the software incorporates large terminologies mapped with classifications.

  12. Patient Dashboard: the use of a colour-coded computerised clinical reminder in Whanganui regional general practices.

    Science.gov (United States)

    McMenamin, John; Nicholson, Rick; Leech, Ken

    2011-12-01

    Clinical reminders have been shown to help general practice achieve an increase in some preventive care items, especially if they identify a patient's eligibility for the target item, prompt clinicians at the right time, provide a fast link to management tools and facilitate clinical recording. WRPHO has introduced the Patient Dashboard clinical reminder and monitored its impact on health targets. This paper reports the impact of a computerised colour-coded clinical reminder on achieving agreed health targets in Whanganui regional practices. Patient Dashboard was developed from previous versions in Auckland and Northland and provided to Whanganui regional practices with Primary Health Organisation (PHO) support. The Dashboard was linked with existing and new clinical management tools which automatically updated clinical records. Data from practices was pooled by Whanganui Regional Primary Health Organisation and target achievement rates reported over 15 months. Over the initial 15 months of Patient Dashboard use, recording of smoking status increased from 74% to 82% and of alcohol use from 15% to 47%. Screening for diabetes increased from 62% to 74%, cardiovascular risk assessment from 20% to 43%, cervical screening from 71% to 79%, and breast screening from 60% to 80%. Patient Dashboard was associated with increased performance indicators both for those targets which were part of a PHO programme and for targets without additional support.

  13. The selection of stopping power and mass energy absorption coefficient data for the HPA Code of Practice for dosimetry

    International Nuclear Information System (INIS)

    Williams, P.C.

    1985-01-01

    The author draws attention to a discussion by Cunningham and Schultz (1984) which states that, 'with the exception of the NACP and AAPM protocols, the selection of stopping power and energy absorption coefficient ratios has been based upon only the stated accelerating potential of the accelerator', and points out that the HPA Revised Code of Practice should be added to these exceptions. In calculating the HPA's new Csub(lambda) values, a similar, but not identical, approach was taken in order to determine the stopping power and absorption coefficient ratios at each radiation quality. It was recognised that the approximation of a spectrum to a monoenergetic spectrum of between 0.4 and 0.45 of the maximum energy, as had been done in calculating the values, given in ICRU Report 14, was incorrect. (U.K.)

  14. The development of a code of practice for single house on-site wastewater treatment in Ireland.

    Science.gov (United States)

    Gill, L W

    2011-01-01

    The performance of six separate percolation areas was intensively monitored to ascertain the attenuation effects of unsaturated subsoils with respect to on-site wastewater effluent: three sites receiving septic tank effluent, the other three sites receiving secondary treated effluent. The development of a biomat across the percolation areas receiving secondary treated effluent was restricted on these sites compared to those sites receiving septic tank effluent. This created significant differences in terms of the hydraulic loading on the percolation areas with implications for the transport and attenuation of indicator microorganisms and nitrogen down through the subsoils and into the groundwater. The results of this work have formed a large input into the production of a new Code of Practice Wastewater Treatment and Disposal Systems Serving Single Houses. This has led to changes in the design of on-site hydraulic loading from 180 L per capita per day (L/c.d) down to 150 L/c.d. The range of acceptable subsoils receiving septic tank effluent has narrowed for more highly permeable subsoils following a series of tracer studies using bacteriophages. However, the range has been extended for lower permeability subsoils (range 0.08 down to 0.06 m/d) receiving secondary treated effluent in order to encourage the effluent to spread further along the trenches. The maximum individual length of percolation trenches receiving secondary effluent has also been reduced to 10 m to encourage dispersion on a wider area. This paper thus highlights how research can directly feed into a Code of Practice.

  15. Code of Practice on radiation protection in the mining and milling of radioactive ores (1980) - Guidelines for storage and packaging of uranium concentrates

    International Nuclear Information System (INIS)

    1986-01-01

    This Guideline is intended to provide assistance in the application of the 1980 Code of Practice on radiation protection in mining and milling of radioactive ores. Its purpose is to give advice relevant to the design, construction and operation of an uranium concentrate storage and packaging facility in which exposure to ionizing radiation from uranium-bearing concentrate will not only conform to the Code, but will also be as low as reasonably achievable. (NEA) [fr

  16. Improvements in practical applicability of NSHEX: nodal transport calculation code for three-dimensional hexagonal-Z geometry

    International Nuclear Information System (INIS)

    Sugino, Kazuteru

    1998-07-01

    As a tool to perform a fast reactor core calculations with high accuracy, NSHEX the nodal transport calculation code for three-dimensional hexagonal-Z geometry is under development. To improve the practical applicability of NSHEX, for instance, in its application to safety analysis and commercial reactor core design studies, we investigated the basic theory used in it, improved the program performance, and evaluated its applicability to the analysis of commercial reactor cores. The current studies show the following: (1) An improvement in the treatment of radial leakage in the radial nodal coupling equation bettered calculational convergence for safety analysis calculation, so the applicability of NSHEX to safety analysis was improved. (2) As a result of comparison of results from NSHEX and the standard core calculation code, it was confirmed that there was consistency between them. (3) According to the evaluation of the effect due to the difference of calculational condition, it was found that the calculation under appropriate nodal expansion orders and Sn orders correspond to the one under most detailed condition. However further investigation is required to reduce the uncertainty in calculational results due to the treatment of high order flux moments. (4) A whole core version of NSHEX enabling calculation for any FBR core geometry has been developed, this improved general applicability of NSHEX. (5) An investigation of the applicability of the rebalance method to acceleration clarified that this improved calculational convergence and it was effective. (J.P.N.)

  17. The Art of Readable Code

    CERN Document Server

    Boswell, Dustin

    2011-01-01

    As programmers, we've all seen source code that's so ugly and buggy it makes our brain ache. Over the past five years, authors Dustin Boswell and Trevor Foucher have analyzed hundreds of examples of "bad code" (much of it their own) to determine why they're bad and how they could be improved. Their conclusion? You need to write code that minimizes the time it would take someone else to understand it-even if that someone else is you. This book focuses on basic principles and practical techniques you can apply every time you write code. Using easy-to-digest code examples from different languag

  18. Color coding of televised task elements in remote work: a literature review with practical recommendations for a fuel reprocessing facility

    International Nuclear Information System (INIS)

    Clarke, M.M.; Preston-Anderson, A.

    1981-11-01

    The experimental literature on the effects of color visual displays was reviewed with particular reference to the performance of remote work in a Hot Experimental Facility (HEF) using real scene closed-circult television systems. It was also reviewed with more general reference to the broader range of work-related issues of operator learning and preference, and display specifications. Color has been shown to enhance the performance of tasks requiring search and location and may also enhance tracking/transportation tasks. However, both HEF large-volume searching and tracking can be computer augmented, alleviating some of the necessity for a color code to assist an operator. Although color enhances long-term memory and is preferred to black and white displays, it has not been shown to have a specific advantage in the performance of unique tasks (where computer augmentation is more problematic and visual input to operator is critical). Practical display specifications are discussed with reference to hue and size of color code, target size, ambient illumination, multiple displays, and coatings. The authors conclude that the disadvantages to color television in the HEF far outweigh any possible advantages and recommend the use of high-resolution black and white systems, unless future experiments unequivocally indicate that (1) color is superior to black and white for in-situ task performance or (2) it is imperative in terms of long-range psychological well-being

  19. The use of plane parallel ionization chambers in high energy electron and photon beams. An international code of practice for dosimetry

    International Nuclear Information System (INIS)

    1997-01-01

    Research on plane-parallel ionization chambers since the IAEA code of practice (TRS-277) was published in 1987 has explained our knowledge on perturbation and other correction factors in ionization chamber, and also constructional details of these chambers have been shown to be important. Different countries have published, or are in the process of publishing, dosimetry recommendations which include specific procedures for the use of plan parallel ionization chambers. An international working group was formed under the auspieces of the IAEA, first to review the status and the actual validity of the code of practice and second to develop an international code of practice of the use of plane parallel ionization chambers in high energy electron and photon beams used in radiotherapy. This document fulfills the second taste. 153 refs, 21 figs, 18 tabs

  20. Code of practice on the management of radioactive wastes from the mining and milling of radioactive ores 1982

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    This Code, issued by the Department of Home Affairs and Environment, was formulated under the provisions of the Environment Protection (Nuclear Codes) Act 1978. The Code provides for prior development, approval and subsequent updating of a waste management programme for each mining or milling operation to which it applies, for the purpose of ensuring an approach to waste management best suited to the particular circumstances of each operation. It also prescribes the duties of the owners, operators and managers of mines and mills. (NEA) [fr

  1. Development of the EHPEA Code of Practice : Results of fieldwork conducted During September- December 2006

    NARCIS (Netherlands)

    Danse, M.G.; Maden, van der E.; Valkman, S.

    2007-01-01

    For the Ethiopian flower sector, the European Union is currently its most important market. By improving quality of production, logistics and marketing strategies, the sector aims to enter the European retail sector, and some other specific niche markets. However, these market segments also demand

  2. Code of Practice for the Use of Ionizing Radiations in Secondary Schools.

    Science.gov (United States)

    National Health and Medical Research Council, Canberra (Australia).

    The appreciation of the potential hazard of ionizing radiation led to the setting up of national, and later, international commissions for the defining of standards of protection for the occupationally exposed worker in the use of ionizing radiation. However, in the last twenty years, with the large scale development of nuclear energy, the need…

  3. Best practice for restoration of stone reefs in Denmark (codes of conduct)

    DEFF Research Database (Denmark)

    Dahl, Karsten; Støttrup, Josianne Gatt; Stenberg, Claus

    . A set of specific biological and environmental objectives that can influence the choice of design of the new reef structure is also presented. The report also includes a set of recommendations for the construction phase, requirements for safety navigation when the restoration work is finalized...

  4. Attitudes of western Canadian cow-calf producers towards the Code of Practice for the Care and Handling of Beef Cattle.

    Science.gov (United States)

    Moggy, Melissa; Pajor, Edmond; Thurston, Wilfreda; Parker, Sarah; Greter, Angela; Schwartzkopf-Genswein, Karen; Campbell, John; Windeyer, M Claire

    2017-11-01

    This study describes western Canadian cow-calf producers' attitudes towards the Code of Practice for the Care and Handling of Beef Cattle (COPB). Most respondents had not read the COPB. Of those familiar with the COPB, most agreed with it, but it did not have a major influence on their decisions.

  5. Ethics Standards Impacting Test Development and Use: A Review of 31 Ethics Codes Impacting Practices in 35 Countries

    Science.gov (United States)

    Leach, Mark M.; Oakland, Thomas

    2007-01-01

    Ethics codes are designed to protect the public by prescribing behaviors professionals are expected to exhibit. Although test use is universal, albeit reflecting strong Western influences, previous studies that examine the degree issues pertaining to test development and use and that are addressed in ethics codes of national psychological…

  6. Glossary of terms recommended for use in radiation control legislation and associated codes of practice

    International Nuclear Information System (INIS)

    Swindon, T.; Kennedy, K.N.; Elliott, G.

    1983-06-01

    A glossary of terms associated with radiological health is presented. It includes basic physics terms, quantities and units, radiological physics terms and radiation protection terms. The National Health and Medical Research Council has recommended that the glossary be used by organizations producing official documents and by appropriate regulatory authorities

  7. Code of Practice on the International Transboundary Movement of Radioactive Waste; Codigo De Practica Sobre Movimientos Internacionales Transfronterizos De Desechos Radiactivos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-11-14

    On 21 September 1990, the General Conference, by resolution GC(XXXIV)/RES/530, adopted a Code of Practice on the International Transboundary Movement of Radioactive Waste and requested the Director General - inter alia - to take all necessary steps to ensure wide dissemination of the Code of Practice at both the national and the international level. The Code of Practice was elaborated by a Group of Experts established pursuant to resolution GC(XXXII)/RES/490 adopted by the General Conference in 1988. The text of the Code of Practice is reproduced herewith for the information of all Member States [Spanish] El 21 de septiembre de 1990, la Conferencia General, en su resolueion GC(XXXIV)/RES/53O, aprobo un Codigo de Practica sobre movimientos internacionales transfronterizos de desechos radiactivos y pidio al Director General, entre otras cosas, que tomase todas las medidas necesarias para lograr una amplia difusion del Codigo de Practica en los planos nacional e internacional. El Codigo de Practica lo elaboro un Grupo de Expertos establecido en cumplimiento de la resolucion GC(XXXII)/RES/49O aprobada por la Conferencia General en 1988. En el presente documento se reproduce el texto del Codigo de Practica para informacion de todos los Estados Miembros.

  8. Code of Practice on the International Transboundary Movement of Radioactive Waste; Kodeks Praktiki V Oblasti Meikduiarodnog0 Transgranichnogo Peremeshhenija Radioaktivnyh Othodov

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-11-15

    On 21 September 1990, the General Conference, by resolution GC(XXXIV)/RES/530, adopted a Code of Practice on the International Transboundary Movement of Radioactive Waste and requested the Director General - inter alia - to take all necessary steps to ensure wide dissemination of the Code of Practice at both the national and the international level. The Code of Practice was elaborated by a Group of Experts established pursuant to resolution GC(XXXII)/RES/490 adopted by the General Conference in 1988. The text of the Code of Practice is reproduced herewith for the information of all Member States [Russian] 21 sentjabrja 1990 goda General'naja konferencija prinjala rezoljuciju GC(XXXIV)/RES/530 o Kodekse praktiki v oblasti mezhdunarodnogo transgranichnogo peremeshhenija radioaktivnyh othodov i predlozhila General'nomu direktoru , v chastnosti, prinjat' vse neobhodimye mery dlja obespechenija shirokogo rasprostranenija Kodeksa praktiki kak na nacional'nom, tak i na mezhdunarodnom urovnjah. Kodeks praktiki byl podgotovlen gruppoj jekspertov , uchrezhdennoj vo ispolnenie rezoljucii GC(XXXII)/RES/490, prinjatoj General'noj konferenciej v 1988 godu. Tekst Kodeksa praktiki vosproizvoditsja nizhe dlja informacii vseh gosudarstv-chlenov.

  9. Development of MCNP interface code in HFETR

    International Nuclear Information System (INIS)

    Qiu Liqing; Fu Rong; Deng Caiyu

    2007-01-01

    In order to describe the HFETR core with MCNP method, the interface code MCNPIP for HFETR and MCNP code is developed. This paper introduces the core DXSY and flowchart of MCNPIP code, and the handling of compositions of fuel elements and requirements on hardware and software. Finally, MCNPIP code is validated against the practical application. (authors)

  10. Practical experience with software tools to assess and improve the quality of existing nuclear analysis and safety codes

    International Nuclear Information System (INIS)

    Marshall, N.H.; Marwil, E.S.; Matthews, S.D.; Stacey, B.J.

    1990-01-01

    Within the constraints of schedule and budget, software tools and techniques were applied to existing FORTRAN codes determining software quality metrics and improving the code quality. Specifically discussed are INEL experiences in applying pretty printers, cross-reference analyzers, and computer aided software engineering (CASE) tools and techniques. These have provided management with measures of the risk potential for individual program modules so that rational decisions can be made on resource allocation. Selected program modules have been modified to reduce the complexity, achieve higher functional independence, and improve the code vectorization. (orig.)

  11. Code of practice. Data v2.0 (2007). Ecoinvent report No. 2

    International Nuclear Information System (INIS)

    Frischknecht, R.; Jungbluth, N.; Althaus, H.-J.; Hischier, R.; Doka, G.; Bauer, Ch.; Dones, R.; Wernet, G.; Nemecek, T.; Primas, A.

    2007-12-01

    This booklet published by the Swiss Centre for Life Cycle Inventories (ecoinvent) discusses how the ecoinvent data available on CDROM can be used. The success of the previous version in the Life Cycle Analysis (LCA) scene is briefly mentioned. The contents of the CDROM with the ecoinvent data and the objectives of LCA projects are discussed, as are LCA methods. Accessing LCA data from the Internet and from the CDROM is looked at, as is the use of the ecoinvent data for a large range of materials and various energy systems. Topics dealt with include dealing with uncertainties, multi-output processes, the aggregation of data, the use of impact assessment results and how to reproduce and quote ecoinvent data in case studies. Changing and adapting ecoinvent data is dealt with, as is error reporting and correction

  12. Code of practice. Data v2.0 (2007). Ecoinvent report No. 2

    Energy Technology Data Exchange (ETDEWEB)

    Frischknecht, R. (ed.) [Ecoinvent Centre, Swiss Federal Laboratories for Materials Testing and Research (EMPA), Duebendorf (Switzerland); Jungbluth, N. (ed.) [ESU-services Ltd, Uster (Switzerland); Althaus, H.-J.; Hischier, R. [Swiss Federal Laboratories for Materials Testing and Research (EMPA), Duebendorf (Switzerland); Doka, G. [Doka Life Cycle Assessments (LCA), Zuerich (Switzerland); Bauer, Ch.; Dones, R. [Paul Scherrer Institute (PSI), Villigen (Switzerland); Wernet, G. [Swiss Federal Institute of Technology (ETHZ), Institute for Chemicals and Bioengineering (ICB), Zuerich (Switzerland); Nemecek, T. [Forschungsanstalt Agroscope Reckenholz-Taenikon (ART), Zuerich (Switzerland); Primas, A. [Basler und Hofmann, Ingenieure und Planer AG, Zuerich (Switzerland)

    2007-12-15

    This booklet published by the Swiss Centre for Life Cycle Inventories (ecoinvent) discusses how the ecoinvent data available on CDROM can be used. The success of the previous version in the Life Cycle Analysis (LCA) scene is briefly mentioned. The contents of the CDROM with the ecoinvent data and the objectives of LCA projects are discussed, as are LCA methods. Accessing LCA data from the Internet and from the CDROM is looked at, as is the use of the ecoinvent data for a large range of materials and various energy systems. Topics dealt with include dealing with uncertainties, multi-output processes, the aggregation of data, the use of impact assessment results and how to reproduce and quote ecoinvent data in case studies. Changing and adapting ecoinvent data is dealt with, as is error reporting and correction.

  13. Summary of Code of Ethics.

    Science.gov (United States)

    Eklund, Kerri

    2016-01-01

    The Guide to the Code of Ethics for Nurses is an excellent guideline for all nurses regardless of their area of practice. I greatly enjoyed reading the revisions in place within the 2015 edition and refreshing my nursing conscience. I plan to always keep my Guide to the Code of Ethics for Nurses near in order to keep my moral compass from veering off the path of quality care.

  14. Drafting an Effective Ethical Code of Conduct for Professional Societies: A Practical Guide

    OpenAIRE

    Margaret C. Hardy

    2016-01-01

    Academic, medical, and research communities are struggling to quickly and effectively address unethical conduct within their professional ranks. Without a policy in place, individuals and institutes are subject to convoluted procedures and unnecessary consequences. In addition to policies geared to prevent harassment and assault, it is important to protect the ethical basis for research and provide a set of guidelines for how professionals treat each other, students, and trainees. Since draft...

  15. Evaluation of Independent Audit and Corporate Go vernance Practices in Turkey Under The Turkish Commercıal Code No. 6102: A Qualitative Research

    Directory of Open Access Journals (Sweden)

    Yasin Karadeniz

    2015-12-01

    Full Text Available The purpose of this study is as follows: To explain the new dimension that the corporate governance practices, which have had troubles for years in Turkey, have acquired with the Turkish Commercial Code and, while explaining such relations, to reveal the importance of independent auditing, which could not become fully functional and has gone through many problems again in the practices of our country, and also the importance of present situation and the situation in future with the help of Turkish Commercial Code and corporate governance relations.Interviews as a way of qualitative research has been done face to face with at least one chief auditor (mostly CPAs working in any of the independent auditing firms in İzmir and Çanakkale cities.Following interviews with auditors it has been revealed that the Turkish Commercial Code, corporate governance in Turkey would contribute positively to development of independent auditing.

  16. Software and the Scientist: Coding and Citation Practices in Geodynamics

    Science.gov (United States)

    Hwang, Lorraine; Fish, Allison; Soito, Laura; Smith, MacKenzie; Kellogg, Louise H.

    2017-11-01

    In geodynamics as in other scientific areas, computation has become a core component of research, complementing field observation, laboratory analysis, experiment, and theory. Computational tools for data analysis, mapping, visualization, modeling, and simulation are essential for all aspects of the scientific workflow. Specialized scientific software is often developed by geodynamicists for their own use, and this effort represents a distinctive intellectual contribution. Drawing on a geodynamics community that focuses on developing and disseminating scientific software, we assess the current practices of software development and attribution, as well as attitudes about the need and best practices for software citation. We analyzed publications by participants in the Computational Infrastructure for Geodynamics and conducted mixed method surveys of the solid earth geophysics community. From this we learned that coding skills are typically learned informally. Participants considered good code as trusted, reusable, readable, and not overly complex and considered a good coder as one that participates in the community in an open and reasonable manor contributing to both long- and short-term community projects. Participants strongly supported citing software reflected by the high rate a software package was named in the literature and the high rate of citations in the references. However, lacking are clear instructions from developers on how to cite and education of users on what to cite. In addition, citations did not always lead to discoverability of the resource. A unique identifier to the software package itself, community education, and citation tools would contribute to better attribution practices.

  17. The materiality of Code

    DEFF Research Database (Denmark)

    Soon, Winnie

    2014-01-01

    This essay studies the source code of an artwork from a software studies perspective. By examining code that come close to the approach of critical code studies (Marino, 2006), I trace the network artwork, Pupufu (Lin, 2009) to understand various real-time approaches to social media platforms (MSN......, Twitter and Facebook). The focus is not to investigate the functionalities and efficiencies of the code, but to study and interpret the program level of code in order to trace the use of various technological methods such as third-party libraries and platforms’ interfaces. These are important...... to understand the socio-technical side of a changing network environment. Through the study of code, including but not limited to source code, technical specifications and other materials in relation to the artwork production, I would like to explore the materiality of code that goes beyond technical...

  18. An Impact of Social Code of Conduct as a Determinant of Ethical Conduct on Human Resources Practices from the Aspect of Strategic Management

    Directory of Open Access Journals (Sweden)

    Harun Demirkaya

    2013-09-01

    Full Text Available This study analyzes the social code of conduct as a determinant of ethical conduct on human resources practices in terms of strategic management and investigates how effective the factor of social conduct is in the human resources managers’ decisions and actions. As a result, it has been seen that human resources managers have a positive attitude towards the employees having advanced social conduct and confirmed that the employees having advanced social conduct have an advantage over their peers in many organizational practices beginning from the recruitment process.

  19. NATIONAL EXPERIENCES REGARDING CORPORATE GOVERNANCE PROPER PRACTICE CODES

    Directory of Open Access Journals (Sweden)

    Durgheu Liliana

    2010-12-01

    Full Text Available This paper is about the principles of proper governance codes, which even tough have blossomed in all parts of the world for more than a decade, the degree in which companies adopt the codes vary in different countries, and the decision to adopt a certain code does not automatically guarranty efficient corporate governance. The paper trys to identify the mechanisms needed for implementing the codes and that will lead to higher efficiency.

  20. Tree Coding of Bilevel Images

    DEFF Research Database (Denmark)

    Martins, Bo; Forchhammer, Søren

    1998-01-01

    Presently, sequential tree coders are the best general purpose bilevel image coders and the best coders of halftoned images. The current ISO standard, Joint Bilevel Image Experts Group (JBIG), is a good example. A sequential tree coder encodes the data by feeding estimates of conditional...... is one order of magnitude slower than JBIG, obtains excellent and highly robust compression performance. A multipass free tree coding scheme produces superior compression results for all test images. A multipass free template coding scheme produces significantly better results than JBIG for difficult...... images such as halftones. By utilizing randomized subsampling in the template selection, the speed becomes acceptable for practical image coding...

  1. Building Energy Codes: Policy Overview and Good Practices

    Energy Technology Data Exchange (ETDEWEB)

    Cox, Sadie [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-02-19

    Globally, 32% of total final energy consumption is attributed to the building sector. To reduce energy consumption, energy codes set minimum energy efficiency standards for the building sector. With effective implementation, building energy codes can support energy cost savings and complementary benefits associated with electricity reliability, air quality improvement, greenhouse gas emission reduction, increased comfort, and economic and social development. This policy brief seeks to support building code policymakers and implementers in designing effective building code programs.

  2. Coding of DNA samples and data in the pharmaceutical industry: current practices and future directions--perspective of the I-PWG.

    Science.gov (United States)

    Franc, M A; Cohen, N; Warner, A W; Shaw, P M; Groenen, P; Snapir, A

    2011-04-01

    DNA samples collected in clinical trials and stored for future research are valuable to pharmaceutical drug development. Given the perceived higher risk associated with genetic research, industry has implemented complex coding methods for DNA. Following years of experience with these methods and with addressing questions from institutional review boards (IRBs), ethics committees (ECs) and health authorities, the industry has started reexamining the extent of the added value offered by these methods. With the goal of harmonization, the Industry Pharmacogenomics Working Group (I-PWG) conducted a survey to gain an understanding of company practices for DNA coding and to solicit opinions on their effectiveness at protecting privacy. The results of the survey and the limitations of the coding methods are described. The I-PWG recommends dialogue with key stakeholders regarding coding practices such that equal standards are applied to DNA and non-DNA samples. The I-PWG believes that industry standards for privacy protection should provide adequate safeguards for DNA and non-DNA samples/data and suggests a need for more universal standards for samples stored for future research.

  3. Variation in clinical coding lists in UK general practice: a barrier to consistent data entry?

    Science.gov (United States)

    Tai, Tracy Waize; Anandarajah, Sobanna; Dhoul, Neil; de Lusignan, Simon

    2007-01-01

    Routinely collected general practice computer data are used for quality improvement; poor data quality including inconsistent coding can reduce their usefulness. To document the diversity of data entry systems currently in use in UK general practice and highlight possible implications for data quality. General practice volunteers provided screen shots of the clinical coding screen they would use to code a diagnosis or problem title in the clinical consultation. The six clinical conditions examined were: depression, cystitis, type 2 diabetes mellitus, sore throat, tired all the time, and myocardial infarction. We looked at the picking lists generated for these problem titles in EMIS, IPS, GPASS and iSOFT general practice clinical computer systems, using the Triset browser as a gold standard for comparison. A mean of 19.3 codes is offered in the picking list after entering a diagnosis or problem title. EMIS produced the longest picking lists and GPASS the shortest, with a mean number of choices of 35.2 and 12.7, respectively. Approximately three-quarters (73.5%) of codes are diagnoses, one-eighth (12.5%) symptom codes, and the remainder come from a range of Read chapters. There was no readily detectable consistent order in which codes were displayed. Velocity coding, whereby commonly-used codes are placed higher in the picking list, results in variation between practices even where they have the same brand of computer system. Current systems for clinical coding promote diversity rather than consistency of clinical coding. As the UK moves towards an integrated health IT system consistency of coding will become more important. A standardised, limited list of codes for primary care might help address this need.

  4. The Revised SEND Code of Practice 0-25: Effective Practice in Engaging Children and Young People in Decision-Making about Interventions for Social, Emotional and Mental Health Needs

    Science.gov (United States)

    Kennedy, Emma-Kate

    2015-01-01

    A key principle upon which the Revised Special Educational Needs and Disability (SEND) Code of Practice 0-25 (2015) is based is children's involvement in decision-making that affects them, and a significant change is the removal of the term "behaviour" and an emphasis on social, emotional and mental health (SEMH) needs. To ensure that…

  5. Theory of epigenetic coding.

    Science.gov (United States)

    Elder, D

    1984-06-07

    The logic of genetic control of development may be based on a binary epigenetic code. This paper revises the author's previous scheme dealing with the numerology of annelid metamerism in these terms. Certain features of the code had been deduced to be combinatorial, others not. This paradoxical contrast is resolved here by the interpretation that these features relate to different operations of the code; the combinatiorial to coding identity of units, the non-combinatorial to coding production of units. Consideration of a second paradox in the theory of epigenetic coding leads to a new solution which further provides a basis for epimorphic regeneration, and may in particular throw light on the "regeneration-duplication" phenomenon. A possible test of the model is also put forward.

  6. Absorbed dose determination in external beam radiotherapy. An international code of practice for dosimetry based on standards of absorbed dose to water

    International Nuclear Information System (INIS)

    2000-01-01

    The International Atomic Energy Agency published in 1987 an International Code of Practice entitled 'Absorbed Dose Determination in Photon and Electron Beams' (IAEA Technical Reports Series No. 277 (TRS-277)), recommending procedures to obtain the absorbed dose in water from measurements made with an ionization chamber in external beam radiotherapy. A second edition of TRS-277 was published in 1997 updating the dosimetry of photon beams, mainly kilovoltage X rays. Another International Code of Practice for radiotherapy dosimetry entitled 'The Use of Plane-Parallel Ionization Chambers in High Energy Electron and Photon Beams' (IAEA Technical Reports Series No. 381 (TRS-381)) was published in 1997 to further update TRS-277 and complement it with respect to the area of parallel-plate ionization chambers. Both codes have proven extremely valuable for users involved in the dosimetry of the radiation beams used in radiotherapy. In TRS-277 the calibration of the ionization chambers was based on primary standards of air kerma; this procedure was also used in TRS-381, but the new trend of calibrating ionization chambers directly in a water phantom in terms of absorbed dose to water was introduced. The development of primary standards of absorbed dose to water for high energy photon and electron beams, and improvements in radiation dosimetry concepts, offer the possibility of reducing the uncertainty in the dosimetry of radiotherapy beams. The dosimetry of kilovoltage X rays, as well as that of proton and heavy ion beams, interest in which has grown considerably in recent years, can also be based on these standards. Thus a coherent dosimetry system based on standards of absorbed dose to water is possible for practically all radiotherapy beams. Many Primary Standard Dosimetry Laboratories (PSDLs) already provide calibrations in terms of absorbed dose to water at the radiation quality of 60 Co gamma rays. Some laboratories have extended calibrations to high energy photon and

  7. The Aesthetics of Coding

    DEFF Research Database (Denmark)

    Andersen, Christian Ulrik

    2007-01-01

    Computer art is often associated with computer-generated expressions (digitally manipulated audio/images in music, video, stage design, media facades, etc.). In recent computer art, however, the code-text itself – not the generated output – has become the artwork (Perl Poetry, ASCII Art, obfuscated...... code, etc.). The presentation relates this artistic fascination of code to a media critique expressed by Florian Cramer, claiming that the graphical interface represents a media separation (of text/code and image) causing alienation to the computer’s materiality. Cramer is thus the voice of a new ‘code...... avant-garde’. In line with Cramer, the artists Alex McLean and Adrian Ward (aka Slub) declare: “art-oriented programming needs to acknowledge the conditions of its own making – its poesis.” By analysing the Live Coding performances of Slub (where they program computer music live), the presentation...

  8. Augmenting Classroom Practices with QR Codes

    Science.gov (United States)

    Thorne, Tristan

    2016-01-01

    The use of mobile devices in the language classroom can help accomplish innumerable learning objectives, yet many teachers regard smartphones and tablets as obstacles to lesson goals. However, as portable technology continues to infiltrate classroom boundaries, it is becoming increasingly clear that educators should find ways to take advantage of…

  9. Development and application of the waste code

    International Nuclear Information System (INIS)

    Morison, I.W.

    1984-01-01

    This paper discusses the objectives and general approach underlying the Australian Code of Practice on the Management of Radioactive Wastes arising from the Mining and Milling of Radioactive Ores 1982. Background to the development of the Code is provided and the guidelines which supplement the Code are considered

  10. French administrative practice and design codes for nuclear vessels

    International Nuclear Information System (INIS)

    Roche, R.L.

    1987-07-01

    French regulations on boilers and pressure vessels have prevailed for a very long time, the first measure having been promulgated on 29 October 1823. Restraining the attention to nuclear pressure vessels it must be pointed out regulations and enforcement by public authorities are more stringent than they are for conventional pressure vessels. The first part of this paper will be devoted to regulations with a special attention to the decree of 26 February 1974 and to the practice of public authorities in this field with special attention given to the Bureau de Controle de la Construction Nucleaire (BCCN = Bureau of Inspection of Nuclear Design and Manufacturing). The second part of this paper will deal with the French construction codes for nuclear components RCC-M (water reactors) and RCC-MR (elevated temperature design)

  11. Extracorporeal membrane oxygenation: current clinical practice, coding, and reimbursement.

    Science.gov (United States)

    Schuerer, Douglas J E; Kolovos, Nikoleta S; Boyd, Kayla V; Coopersmith, Craig M

    2008-07-01

    Extracorporeal membrane oxygenation (ECMO) is a technique for providing life support for patients experiencing both pulmonary and cardiac failure by maintaining oxygenation and perfusion until native organ function is restored. ECMO is used routinely at many specialized hospitals for infants and less commonly for children with respiratory or cardiac failure from a variety of causes. Its usage is more controversial in adults, but select medical centers have reported favorable findings in patients with ARDS and other causes of severe pulmonary failure. ECMO is also rarely used as a rescue therapy in a small subset of adult patients with cardiac failure. This article will review the current uses and techniques of ECMO in the critical care setting as well as the evidence supporting its usage. In addition, current practice management related to coding and reimbursement for this intensive therapy will be discussed.

  12. C++ Coding Standards 101 Rules, Guidelines, and Best Practices

    CERN Document Server

    Sutter, Herb

    2005-01-01

    Consistent, high-quality coding standards improve software quality, reduce time-to-market, promote teamwork, eliminate time wasted on inconsequential matters, and simplify maintenance. Now, two of the world's most respected C++ experts distill the rich collective experience of the global C++ community into a set of coding standards that every developer and development team can understand and use as a basis for their own coding standards.

  13. Relevance and Effectiveness of the WHO Global Code Practice on the International Recruitment of Health Personnel--Ethical and Systems Perspectives.

    Science.gov (United States)

    Brugha, Ruairí; Crowe, Sophie

    2015-05-20

    The relevance and effectiveness of the World Health Organization's (WHO's) Global Code of Practice on the International Recruitment of Health Personnel is being reviewed in 2015. The Code, which is a set of ethical norms and principles adopted by the World Health Assembly (WHA) in 2010, urges members states to train and retain the health personnel they need, thereby limiting demand for international migration, especially from the under-staffed health systems in low- and middle-income countries. Most countries failed to submit a first report in 2012 on implementation of the Code, including those source countries whose health systems are most under threat from the recruitment of their doctors and nurses, often to work in 4 major destination countries: the United States, United Kingdom, Canada and Australia. Political commitment by source country Ministers of Health needs to have been achieved at the May 2015 WHA to ensure better reporting by these countries on Code implementation for it to be effective. This paper uses ethics and health systems perspectives to analyse some of the drivers of international recruitment. The balance of competing ethics principles, which are contained in the Code's articles, reflects a tension that was evident during the drafting of the Code between 2007 and 2010. In 2007-2008, the right of health personnel to migrate was seen as a preeminent principle by US representatives on the Global Council which co-drafted the Code. Consensus on how to balance competing ethical principles--giving due recognition on the one hand to the obligations of health workers to the countries that trained them and the need for distributive justice given the global inequities of health workforce distribution in relation to need, and the right to migrate on the other hand--was only possible after President Obama took office in January 2009. It is in the interests of all countries to implement the Global Code and not just those that are losing their health

  14. Validation of thermalhydraulic codes

    International Nuclear Information System (INIS)

    Wilkie, D.

    1992-01-01

    Thermalhydraulic codes require to be validated against experimental data collected over a wide range of situations if they are to be relied upon. A good example is provided by the nuclear industry where codes are used for safety studies and for determining operating conditions. Errors in the codes could lead to financial penalties, to the incorrect estimation of the consequences of accidents and even to the accidents themselves. Comparison between prediction and experiment is often described qualitatively or in approximate terms, e.g. ''agreement is within 10%''. A quantitative method is preferable, especially when several competing codes are available. The codes can then be ranked in order of merit. Such a method is described. (Author)

  15. Efficient Coding of Information: Huffman Coding -RE ...

    Indian Academy of Sciences (India)

    to a stream of equally-likely symbols so as to recover the original stream in the event of errors. The for- ... The source-coding problem is one of finding a mapping from U to a ... probability that the random variable X takes the value x written as ...

  16. Development, dissemination, and applications of a new terminological resource, the Q-Code taxonomy for professional aspects of general practice/family medicine.

    Science.gov (United States)

    Jamoulle, Marc; Resnick, Melissa; Grosjean, Julien; Ittoo, Ashwin; Cardillo, Elena; Vander Stichele, Robert; Darmoni, Stefan; Vanmeerbeek, Marc

    2018-12-01

    While documentation of clinical aspects of General Practice/Family Medicine (GP/FM) is assured by the International Classification of Primary Care (ICPC), there is no taxonomy for the professional aspects (context and management) of GP/FM. To present the development, dissemination, applications, and resulting face validity of the Q-Codes taxonomy specifically designed to describe contextual features of GP/FM, proposed as an extension to the ICPC. The Q-Codes taxonomy was developed from Lamberts' seminal idea for indexing contextual content (1987) by a multi-disciplinary team of knowledge engineers, linguists and general practitioners, through a qualitative and iterative analysis of 1702 abstracts from six GP/FM conferences using Atlas.ti software. A total of 182 concepts, called Q-Codes, representing professional aspects of GP/FM were identified and organized in a taxonomy. Dissemination: The taxonomy is published as an online terminological resource, using semantic web techniques and web ontology language (OWL) ( http://www.hetop.eu/Q ). Each Q-Code is identified with a unique resource identifier (URI), and provided with preferred terms, and scope notes in ten languages (Portuguese, Spanish, English, French, Dutch, Korean, Vietnamese, Turkish, Georgian, German) and search filters for MEDLINE and web searches. This taxonomy has already been used to support queries in bibliographic databases (e.g., MEDLINE), to facilitate indexing of grey literature in GP/FM as congress abstracts, master theses, websites and as an educational tool in vocational teaching, Conclusions: The rapidly growing list of practical applications provides face-validity for the usefulness of this freely available new terminological resource.

  17. Hospital Coding Practice, Data Quality, and DRG-Based Reimbursement under the Thai Universal Coverage Scheme

    Science.gov (United States)

    Pongpirul, Krit

    2011-01-01

    In the Thai Universal Coverage scheme, hospital providers are paid for their inpatient care using Diagnosis Related Group (DRG) reimbursement. Questionable quality of the submitted DRG codes has been of concern whereas knowledge about hospital coding practice has been lacking. The objectives of this thesis are (1) To explore hospital coding…

  18. Developing and modifying behavioral coding schemes in pediatric psychology: a practical guide.

    Science.gov (United States)

    Chorney, Jill MacLaren; McMurtry, C Meghan; Chambers, Christine T; Bakeman, Roger

    2015-01-01

    To provide a concise and practical guide to the development, modification, and use of behavioral coding schemes for observational data in pediatric psychology. This article provides a review of relevant literature and experience in developing and refining behavioral coding schemes. A step-by-step guide to developing and/or modifying behavioral coding schemes is provided. Major steps include refining a research question, developing or refining the coding manual, piloting and refining the coding manual, and implementing the coding scheme. Major tasks within each step are discussed, and pediatric psychology examples are provided throughout. Behavioral coding can be a complex and time-intensive process, but the approach is invaluable in allowing researchers to address clinically relevant research questions in ways that would not otherwise be possible. © The Author 2014. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  19. Implementation of LT codes based on chaos

    International Nuclear Information System (INIS)

    Zhou Qian; Li Liang; Chen Zengqiang; Zhao Jiaxiang

    2008-01-01

    Fountain codes provide an efficient way to transfer information over erasure channels like the Internet. LT codes are the first codes fully realizing the digital fountain concept. They are asymptotically optimal rateless erasure codes with highly efficient encoding and decoding algorithms. In theory, for each encoding symbol of LT codes, its degree is randomly chosen according to a predetermined degree distribution, and its neighbours used to generate that encoding symbol are chosen uniformly at random. Practical implementation of LT codes usually realizes the randomness through pseudo-randomness number generator like linear congruential method. This paper applies the pseudo-randomness of chaotic sequence in the implementation of LT codes. Two Kent chaotic maps are used to determine the degree and neighbour(s) of each encoding symbol. It is shown that the implemented LT codes based on chaos perform better than the LT codes implemented by the traditional pseudo-randomness number generator. (general)

  20. Values and ethical principles for practicing as magistrate/ legal advisor out of the perspective of the codes and national and international statements of principles

    Directory of Open Access Journals (Sweden)

    Marţian Iovan

    2016-10-01

    Full Text Available The coordinating and regulating role of the moral values, of the Deontological Code in practicing the magistrate/ legal advisor position is analysed in this article, so that their decisions correspond the universal imperative of practical accomplishment of justice, implicitly to the audience’s expectations with regard to the efficiency and efficacy of the services delivered by the institutions in the judicial system. The subject is of obvious actuality, fact which results in the existence of a relevant number of cases of violation, deforming of the ethical principles, of the specific deontological norms for the legal advisors, especially for the magistrates, which occur in performing the act of justice. The author highlights through examples, the harmful effects of some magistrates’ side-slipping from the ethical principles (Independence, Impartiality, Integrity stipulated in the most important deontological codes, statements of principles or national and international conventions. The logical conclusion, resulting from the analyses, aims to perfection the judicial system, the moral part of the legal higher education, of the magistrates’ continuous training and assessment.

  1. Relevance and Effectiveness of the WHO Global Code Practice on the International Recruitment of Health Personnel – Ethical and Systems Perspectives

    Directory of Open Access Journals (Sweden)

    Ruairi Brugha

    2015-06-01

    Full Text Available The relevance and effectiveness of the World Health Organization’s (WHO’s Global Code of Practice on the International Recruitment of Health Personnel is being reviewed in 2015. The Code, which is a set of ethical norms and principles adopted by the World Health Assembly (WHA in 2010, urges members states to train and retain the health personnel they need, thereby limiting demand for international migration, especially from the under-staffed health systems in low- and middle-income countries. Most countries failed to submit a first report in 2012 on implementation of the Code, including those source countries whose health systems are most under threat from the recruitment of their doctors and nurses, often to work in 4 major destination countries: the United States, United Kingdom, Canada and Australia. Political commitment by source country Ministers of Health needs to have been achieved at the May 2015 WHA to ensure better reporting by these countries on Code implementation for it to be effective. This paper uses ethics and health systems perspectives to analyse some of the drivers of international recruitment. The balance of competing ethics principles, which are contained in the Code’s articles, reflects a tension that was evident during the drafting of the Code between 2007 and 2010. In 2007-2008, the right of health personnel to migrate was seen as a preeminent principle by US representatives on the Global Council which co-drafted the Code. Consensus on how to balance competing ethical principles – giving due recognition on the one hand to the obligations of health workers to the countries that trained them and the need for distributive justice given the global inequities of health workforce distribution in relation to need, and the right to migrate on the other hand – was only possible after President Obama took office in January 2009. It is in the interests of all countries to implement the Global Code and not just those that

  2. Exploring the concept of QR Code and the benefits of using QR Code for companies

    OpenAIRE

    Ji, Qianyu

    2014-01-01

    This research work concentrates on the concept of QR Code and the benefits of using QR Code for companies. The first objective of this research work is to study the general information of QR Code in order to guide people to understand the QR Code in detail. The second objective of this research work is to explore and analyze the essential and feasible technologies of QR Code for the sake of clearing the technologies of QR code. Additionally, this research work through QR Code best practices t...

  3. Practice what you preach’: Nurses’ perspectives on the Code of Ethics and Service Pledge in five South African hospitals

    Directory of Open Access Journals (Sweden)

    Janine White

    2015-05-01

    Full Text Available Background: A recent focus of the global discourse on the health workforce has been on its quality, including the existence of codes of ethics. In South Africa, the importance of ethics and value systems in nursing was emphasised in the 2011 National Nursing Summit. Objective: The study explored hospital nurses’ perceptions of the International Code of Ethics for Nurses; their perceptions of the South African Nurses’ Pledge of Service; and their views on contemporary ethical practice. Methods: Following university ethics approval, the study was done at a convenience sample of five hospitals in two South African provinces. In each hospital, all day duty nurses in paediatric, maternity, adult medical, and adult surgical units were requested to complete a self-administered questionnaire. The questionnaire focused on their perceptions of the Code of Ethics and the Pledge, using a seven-point Likert scale. STATA® 13 and NVIVO 10 were used to analyse survey data and open-ended responses, respectively. Results: The mean age of survey participants (n=69 was 39 years (SD=9.2, and the majority were female (96%. The majority agreed with a statement that they will promote the human rights of individuals (98% and that they have a duty to meet the health and social needs of the public (96%. More nuanced responses were obtained for some questions, with 60% agreeing with a statement that too much emphasis is placed on patients’ rights as opposed to nurses’ rights and 32% agreeing with a statement that they would take part in strike action to improve nurses’ salaries and working conditions. The dilemmas of nurses to uphold the Code of Ethics and the Pledge in face of workplace constraints or poor working conditions were revealed in nurses’ responses to open-ended questions. Conclusion: Continuing education in ethics and addressing health system deficiencies will enhance nurses’ professional development and their ethical decision-making and

  4. Practice what you preach’: Nurses’ perspectives on the Code of Ethics and Service Pledge in five South African hospitals

    Science.gov (United States)

    White, Janine; Phakoe, Maureen; Rispel, Laetitia C.

    2015-01-01

    Background A recent focus of the global discourse on the health workforce has been on its quality, including the existence of codes of ethics. In South Africa, the importance of ethics and value systems in nursing was emphasised in the 2011 National Nursing Summit. Objective The study explored hospital nurses’ perceptions of the International Code of Ethics for Nurses; their perceptions of the South African Nurses’ Pledge of Service; and their views on contemporary ethical practice. Methods Following university ethics approval, the study was done at a convenience sample of five hospitals in two South African provinces. In each hospital, all day duty nurses in paediatric, maternity, adult medical, and adult surgical units were requested to complete a self-administered questionnaire. The questionnaire focused on their perceptions of the Code of Ethics and the Pledge, using a seven-point Likert scale. STATA® 13 and NVIVO 10 were used to analyse survey data and open-ended responses, respectively. Results The mean age of survey participants (n=69) was 39 years (SD=9.2), and the majority were female (96%). The majority agreed with a statement that they will promote the human rights of individuals (98%) and that they have a duty to meet the health and social needs of the public (96%). More nuanced responses were obtained for some questions, with 60% agreeing with a statement that too much emphasis is placed on patients’ rights as opposed to nurses’ rights and 32% agreeing with a statement that they would take part in strike action to improve nurses’ salaries and working conditions. The dilemmas of nurses to uphold the Code of Ethics and the Pledge in face of workplace constraints or poor working conditions were revealed in nurses’ responses to open-ended questions. Conclusion Continuing education in ethics and addressing health system deficiencies will enhance nurses’ professional development and their ethical decision-making and practice. PMID:25971398

  5. An audit of health products and services marketed on chiropractic websites in Alberta and consideration of these practices in the context of chiropractic codes of conduct and ethics.

    Science.gov (United States)

    Page, Stacey A

    2007-06-01

    Chiropractic's success as a health care profession is evidenced in part by the rising number of practitioners. Paradoxically, this success may start to cost the profession, as the number of consumers may not be increasing proportionally. Fewer patients mean less income for practitioners. Some chiropractors are responding to these pressures by marketing health products, and services. To describe the extent to which Alberta chiropractors with websites sold health products and the extent to which fee discounts/service inducements were advertised. To consider these practices in the context of chiropractic codes of conduct and ethics. Chiropractic websites in the province of Alberta were identified using the online Telus Business Finder and cross-referenced with the Yellow Pages print directories. The websites were searched and an inventory of the health products for sale was recorded. Fee discounts and service inducements were also recorded. 56 websites were identified and reviewed. Just under two-thirds of the chiropractic websites surveyed contained information on health products for sale. Orthotics were sold most often (N = 29 practices; 51.8%), followed by pillows and supports (N = 15: 26.8%), vitamins/nutritional supplements (N = 15; 26.8%) and exercise/rehabilitation products (N = 10; 17.9%). Nine practices (16.1%) offered some type of inducement to potential customers. These included discounts on treatment packages (N = 2; 3.6%), free gait/ posture analyses (N = 2; 3.6%) and free general consultations with the chiropractors (N = 3; 5.4%) The marketing of health care products and services by chiropractors in Alberta is common. Such practices raise ethical considerations for the profession. Professional guidelines vary on the acceptability of these practices. Consumer and practitioner perspectives and practices regarding retailing need to be further examined.

  6. Real Virtuality: A Code of Ethical ConductRecommendations for Good Scientific Practice and the Consumers of VR-Technology

    Directory of Open Access Journals (Sweden)

    Michael eMadary

    2016-02-01

    Full Text Available The goal of this article is to present a first list of ethical concerns that may arise from research and personal use of virtual reality (VR and related technology, and to offer concrete recommendations for minimizing those risks. Many of the recommendations call for focused research initiatives. In the first part of the article, we discuss the relevant evidence from psychology that motivates our concerns. In section 1.1, we cover some of the main results suggesting that one’s environment can influence one’s psychological states, as well as recent work on inducing illusions of embodiment. Then, in section 1.2, we go on to discuss recent evidence indicating that immersion in VR can have psychological effects that last after leaving the virtual environment. In the second part of the article we turn to the risks and recommendations. We begin, in section 2.1, with the research ethics of VR, covering six main topics: the limits of experimental environments, informed consent, clinical risks, dual-use, online research, and a general point about the limitations of a code of conduct for research. Then, in section 2.2, we turn to the risks of VR for the general public, covering four main topics: long-term immersion, neglect of the social and physical environment, risky content, and privacy. We offer concrete recommendations for each of these ten topics, summarized in Table 1.

  7. QR codes: next level of social media.

    Science.gov (United States)

    Gottesman, Wesley; Baum, Neil

    2013-01-01

    The OR code, which is short for quick response code, system was invented in Japan for the auto industry. Its purpose was to track vehicles during manufacture; it was designed to allow high-speed component scanning. Now the scanning can be easily accomplished via cell phone, making the technology useful and within reach of your patients. There are numerous applications for OR codes in the contemporary medical practice. This article describes QR codes and how they might be applied for marketing and practice management.

  8. NATO Code of Best Practice for Command and Control Assessment (Code OTAN des meilleures pratiques pour l’evaluation du commandement et du controle)

    Science.gov (United States)

    2004-01-01

    Social Sciences. Hawkins, G. (1984). Structural Variance and Other Related Topics in the SHAPE Armour /Anti- Armour Study. In R.K. Huber (Ed...threats ( SWOT ). Where an assessment uses experimentation or observation of exercises it is important to identify independent and dependent variables and...Engagement SWOT Strengths, Weaknesses, Opportunities, Threats 10.9 CHAPTER 10 REFERENCES Kahnmann, D., Slovik, P., & Tversky, A. (Eds.). (1982

  9. Code of Ethics for Electrical Engineers

    Science.gov (United States)

    Matsuki, Junya

    The Institute of Electrical Engineers of Japan (IEEJ) has established the rules of practice for its members recently, based on its code of ethics enacted in 1998. In this paper, first, the characteristics of the IEEJ 1998 ethical code are explained in detail compared to the other ethical codes for other fields of engineering. Secondly, the contents which shall be included in the modern code of ethics for electrical engineers are discussed. Thirdly, the newly-established rules of practice and the modified code of ethics are presented. Finally, results of questionnaires on the new ethical code and rules which were answered on May 23, 2007, by 51 electrical and electronic students of the University of Fukui are shown.

  10. Why comply with a code of ethics?

    Science.gov (United States)

    Spielthenner, Georg

    2015-05-01

    A growing number of professional associations and occupational groups are creating codes of ethics with the goal of guiding their members, protecting service users, and safeguarding the reputation of the profession. There is a great deal of literature dealing with the question to what extent ethical codes can achieve their desired objectives. The present paper does not contribute to this debate. Its aim is rather to investigate how rational it is to comply with codes of conduct. It is natural and virtually inevitable for a reflective person to ask why one should pay any attention to ethical codes, in particular if following a code is not in one's own interest. In order to achieve the aim of this paper, I shall (in "Quasi-reasons for complying with an ethical code" section) discuss reasons that only appear to be reasons for complying with a code. In "Code-independent reasons" section, I shall present genuine practical reasons that, however, turn out to be reasons of the wrong kind. In "Code-dependent reasons" section finally presents the most important reasons for complying with ethical codes. The paper argues that while ethical codes do not necessarily yield reasons for action, professionals can have genuine reasons for complying with a code, which may, however, be rather weak and easily overridden by reasons for deviating from the code.

  11. Code of Medical Ethics

    Directory of Open Access Journals (Sweden)

    . SZD-SZZ

    2017-03-01

    Full Text Available Te Code was approved on December 12, 1992, at the 3rd regular meeting of the General Assembly of the Medical Chamber of Slovenia and revised on April 24, 1997, at the 27th regular meeting of the General Assembly of the Medical Chamber of Slovenia. The Code was updated and harmonized with the Medical Association of Slovenia and approved on October 6, 2016, at the regular meeting of the General Assembly of the Medical Chamber of Slovenia.

  12. Principles of speech coding

    CERN Document Server

    Ogunfunmi, Tokunbo

    2010-01-01

    It is becoming increasingly apparent that all forms of communication-including voice-will be transmitted through packet-switched networks based on the Internet Protocol (IP). Therefore, the design of modern devices that rely on speech interfaces, such as cell phones and PDAs, requires a complete and up-to-date understanding of the basics of speech coding. Outlines key signal processing algorithms used to mitigate impairments to speech quality in VoIP networksOffering a detailed yet easily accessible introduction to the field, Principles of Speech Coding provides an in-depth examination of the

  13. Static analysis: from theory to practice; Static analysis of large-scale embedded code, generation of abstract domains

    International Nuclear Information System (INIS)

    Monniaux, D.

    2009-06-01

    Software operating critical systems (aircraft, nuclear power plants) should not fail - whereas most computerised systems of daily life (personal computer, ticket vending machines, cell phone) fail from time to time. This is not a simple engineering problem: it is known, since the works of Turing and Cook, that proving that programs work correctly is intrinsically hard. In order to solve this problem, one needs methods that are, at the same time, efficient (moderate costs in time and memory), safe (all possible failures should be found), and precise (few warnings about nonexistent failures). In order to reach a satisfactory compromise between these goals, one can research fields as diverse as formal logic, numerical analysis or 'classical' algorithmics. From 2002 to 2007 I participated in the development of the Astree static analyser. This suggested to me a number of side projects, both theoretical and practical (use of formal proof techniques, analysis of numerical filters...). More recently, I became interested in modular analysis of numerical property and in the applications to program analysis of constraint solving techniques (semi-definite programming, SAT and SAT modulo theory). (author)

  14. Analysis of quantum error-correcting codes: Symplectic lattice codes and toric codes

    Science.gov (United States)

    Harrington, James William

    Quantum information theory is concerned with identifying how quantum mechanical resources (such as entangled quantum states) can be utilized for a number of information processing tasks, including data storage, computation, communication, and cryptography. Efficient quantum algorithms and protocols have been developed for performing some tasks (e.g. , factoring large numbers, securely communicating over a public channel, and simulating quantum mechanical systems) that appear to be very difficult with just classical resources. In addition to identifying the separation between classical and quantum computational power, much of the theoretical focus in this field over the last decade has been concerned with finding novel ways of encoding quantum information that are robust against errors, which is an important step toward building practical quantum information processing devices. In this thesis I present some results on the quantum error-correcting properties of oscillator codes (also described as symplectic lattice codes) and toric codes. Any harmonic oscillator system (such as a mode of light) can be encoded with quantum information via symplectic lattice codes that are robust against shifts in the system's continuous quantum variables. I show the existence of lattice codes whose achievable rates match the one-shot coherent information over the Gaussian quantum channel. Also, I construct a family of symplectic self-dual lattices and search for optimal encodings of quantum information distributed between several oscillators. Toric codes provide encodings of quantum information into two-dimensional spin lattices that are robust against local clusters of errors and which require only local quantum operations for error correction. Numerical simulations of this system under various error models provide a calculation of the accuracy threshold for quantum memory using toric codes, which can be related to phase transitions in certain condensed matter models. I also present

  15. New code of conduct

    CERN Multimedia

    Laëtitia Pedroso

    2010-01-01

    During his talk to the staff at the beginning of the year, the Director-General mentioned that a new code of conduct was being drawn up. What exactly is it and what is its purpose? Anne-Sylvie Catherin, Head of the Human Resources (HR) Department, talked to us about the whys and wherefores of the project.   Drawing by Georges Boixader from the cartoon strip “The World of Particles” by Brian Southworth. A code of conduct is a general framework laying down the behaviour expected of all members of an organisation's personnel. “CERN is one of the very few international organisations that don’t yet have one", explains Anne-Sylvie Catherin. “We have been thinking about introducing a code of conduct for a long time but lacked the necessary resources until now”. The call for a code of conduct has come from different sources within the Laboratory. “The Equal Opportunities Advisory Panel (read also the "Equal opportuni...

  16. The code of ethics for nurses.

    Science.gov (United States)

    Zahedi, F; Sanjari, M; Aala, M; Peymani, M; Aramesh, K; Parsapour, A; Maddah, Ss Bagher; Cheraghi, Ma; Mirzabeigi, Gh; Larijani, B; Dastgerdi, M Vahid

    2013-01-01

    Nurses are ever-increasingly confronted with complex concerns in their practice. Codes of ethics are fundamental guidance for nursing as many other professions. Although there are authentic international codes of ethics for nurses, the national code would be the additional assistance provided for clinical nurses in their complex roles in care of patients, education, research and management of some parts of health care system in the country. A national code can provide nurses with culturally-adapted guidance and help them to make ethical decisions more closely to the Iranian-Islamic background. Given the general acknowledgement of the need, the National Code of Ethics for Nurses was compiled as a joint project (2009-2011). The Code was approved by the Health Policy Council of the Ministry of Health and Medical Education and communicated to all universities, healthcare centers, hospitals and research centers early in 2011. The focus of this article is on the course of action through which the Code was compiled, amended and approved. The main concepts of the code will be also presented here. No doubt, development of the codes should be considered as an ongoing process. This is an overall responsibility to keep the codes current, updated with the new progresses of science and emerging challenges, and pertinent to the nursing practice.

  17. A review of the Code of Practice for the Management of Radioactive Wastes from the Mining and Milling of Radioactive Ores

    International Nuclear Information System (INIS)

    1984-01-01

    This paper concentrates on the philosophy of the Code and its guidelines. It is considered that the intent of the Code and the legal status of the guidelines need to be clarified. Mill tailings management and water management at Ranger are also considered

  18. Physics of codes

    International Nuclear Information System (INIS)

    Cooper, R.K.; Jones, M.E.

    1989-01-01

    The title given this paper is a bit presumptuous, since one can hardly expect to cover the physics incorporated into all the codes already written and currently being written. The authors focus on those codes which have been found to be particularly useful in the analysis and design of linacs. At that the authors will be a bit parochial and discuss primarily those codes used for the design of radio-frequency (rf) linacs, although the discussions of TRANSPORT and MARYLIE have little to do with the time structures of the beams being analyzed. The plan of this paper is first to describe rather simply the concepts of emittance and brightness, then to describe rather briefly each of the codes TRANSPORT, PARMTEQ, TBCI, MARYLIE, and ISIS, indicating what physics is and is not included in each of them. It is expected that the vast majority of what is covered will apply equally well to protons and electrons (and other particles). This material is intended to be tutorial in nature and can in no way be expected to be exhaustive. 31 references, 4 figures

  19. Codex general standard for irradiated foods and recommended international code of practice for the operation of radiation facilities used for the treatment of foods

    International Nuclear Information System (INIS)

    1990-06-01

    The FAO/WHO Codex Alimentarius Commission was established to implement the Joint FAO/WHO Food Standards Programme. The purpose of this programme is to protect the health of consumers and to ensure fair practices in the food trade. At its 15th session, held in July 1983, the Commission adopted a Codex General Standard for Irradiated Foods and a Recommended International Code of Practice for the Operation of Radiation Facilities used for the Treatment of Foods. This Standard takes into account the recommendations and conclusions of the Joint FAO/IAEA/WHO Expert Committees convened to evaluate all available data concerning the various aspects of food irradiation. This Standard refers only to those aspects which relate to the processing of foods by ionising energy. The Standard recognizes that the process of food irradiation has been established as safe for general application to an overall average level of absorbed dose of 10 KGy. The latter value shold not be regarded as a toxicological upper limit above which irradiated foods become unsafe; it is simply the level at or below which safety has been established. The Standard provides certain mandatory provisions concerning the facilities used and for the control of the process in the irradiation plants. The present Standard requires that shipping documents accompanying irradiated foods moving in trade should indicate the fact of irradiation. The labelling of prepackaged irradiated foods intended for direct sale to the consumer is not covered in this Standard

  20. Codex general standard for irradiated foods and recommended international code of practice for the operation of radiation facilities used for the treatment of foods

    International Nuclear Information System (INIS)

    1984-01-01

    The FAO/WHO Codex Alimentarius Commission was established to implement the Joint FAO/WHO Food Standards Programme. The purpose of this programme is to protect the health of consumers and to ensure fair practices in the food trade. At its 15th session, held in July 1983, the Commission adopted a Codex General Standard for Irradiated Foods and a Recommended International Code of Practice for the Operation of Radiation Facilities used for the Treatment of Foods. This Standard takes into account the recommendations and conclusions of the Joint FAO/IAEA/WHO Expert Committees convened to evaluate all available data concerning the various aspects of food irradiation. This Standard refers only to those aspects which relate to the processing of foods by ionising energy. The Standard recognizes that the process of food irradiation has been established as safe for general application to an overall average level of absorbed dose of 10 kGy. The latter value should not be regarded as a toxicological upper limit above which irradiated foods become unsafe; it is simply the level at or below which safety has been established. The Standard provides certain mandatory provisions concerning the facilities used and for the control of the process in the irradiation plants. The present Standard requires that shipping documents accompanying irradiated foods moving in trade should indicate the fact of irradiation. The labelling of prepackaged irradiated foods intended for direct sale to the consumer is not covered in this Standard

  1. CERN Code of Conduct

    CERN Document Server

    Department, HR

    2010-01-01

    The Code is intended as a guide in helping us, as CERN contributors, to understand how to conduct ourselves, treat others and expect to be treated. It is based around the five core values of the Organization. We should all become familiar with it and try to incorporate it into our daily life at CERN.

  2. An audit of health products advertised for sale on chiropractic Web sites in Canada and consideration of these practices in the context of Canadian chiropractic codes of ethics and conduct.

    Science.gov (United States)

    Page, Stacey A; Grod, Jaroslaw P

    2009-01-01

    This study describes the extent to which chiropractors with Web sites practicing in Canada advertise health products for sale and considers this practice in the context of chiropractic codes of ethics and conduct. Chiropractic Web sites in Canada were identified using a public online business directory (Canada 411). The Web sites were searched, and an inventory of the health products for sale was taken. The influences of type of practice and province of practice on the sale of health product were assessed. Textual comments about health product marketing were summarized. National and provincial codes of ethics were reviewed, and the content on health product advertising was summarized. Two hundred eighty-seven Web sites were reviewed. Just more than half of the Web sites contained information on health products for sale (n = 158, 54%). Orthotics were advertised most often (n = 136 practices, 47%), followed by vitamins/nutritional supplements (n = 53, 18%), pillows and supports (n = 40, 14%), and exercise/rehabilitation products (n = 20, 7%). Chiropractors in solo or group chiropractic practices were less likely to advertise health products than those in multidisciplinary practice (P advertise nutritional supplements (P ethics and conduct varied in their guidelines regarding health product sales. Variations in codes of ethics and in the proportions of practitioners advertising health products for sales across the country suggest that opinions may be divided on the acceptability of health product sales. Such practices raise questions and considerations for the chiropractic profession.

  3. Modelling the dissolution of borosilicate glasses for radioactive waste disposal with the PHREEQE/GLASSOL code: theory and practice

    International Nuclear Information System (INIS)

    Curti, E.

    1991-02-01

    A model describing the corrosion kinetics of silicate glasses has been developed by Grambow in recent years. In this report, the theoretical background of the model is thoroughly discussed, and its practical use demonstrated. The main objectives were: 1) to test the validity of the basic assumptions on which the model relies, and 2) to assess whether it can be applied to the safety analysis of a Swiss final repository for high-level radioactive waste. Transition State Theory, a tool based on quantum mechanical principles, has been used by Grambow to derive a general kinetic equation for the corrosion of silicate glasses. This equation predicts successfully the observed dependence of the corrosion rate on the silicic acid concentration in solution according to a first order kinetics law. However, some parameters required by this equation are determined on the base of questionable assumptions. In particular, the simplistic surface complexation model used for the calculation of the free energy of the glass-water reaction yields, for the protonation of silicon on the glass surface, results which are not consistent with the experimental findings. Further, although the model predicts a unique value, common to all silicate glasses, for the activation energy of the rate-determining elementary reaction, leaching experiments conducted on a wide variety of glasses suggest that this quantity may vary by a factor 2. In its present form, the model is judged to be unsuitable for the safety analysis of the Swiss final repository. The reasons include: 1) the model neglects the potential effects of diffusive transport and silica sorption in a bentonite backfill on the glass corrosion kinetics, 2) the release of radionuclides can be only modelled assuming congruent dissolution, and 3) the magnitude of the final rates of corrosion, the parameter defining the maximal lifetime of the glass matrix, is still not known with sufficient precision. (author) figs., tabs., 27 refs

  4. Practical Salesforce.com development without code customizing salesforce on the Force.com platform

    CERN Document Server

    Weinmeister, Philip

    2014-01-01

    Are you facing a challenging Salesforce.com problem-say, relating to customization, configuration, reporting, dashboards, or formulation-that you can't quite crack? Or maybe you are hoping to infuse some creativity into your solution design strategy to solve problems faster or make solutions more efficient? Practical Salesforce.com Development Without Code shows you how to unlock the power of the Force.com platform to solve real business problems-and all without writing a line of code. Adhering to Salesforce.com's ""Clicks, not code"" mantra, Salesforce.com expert Phil Weinmeister walks you t

  5. Construction of Capacity Achieving Lattice Gaussian Codes

    KAUST Repository

    Alghamdi, Wael

    2016-04-01

    We propose a new approach to proving results regarding channel coding schemes based on construction-A lattices for the Additive White Gaussian Noise (AWGN) channel that yields new characterizations of the code construction parameters, i.e., the primes and dimensions of the codes, as functions of the block-length. The approach we take introduces an averaging argument that explicitly involves the considered parameters. This averaging argument is applied to a generalized Loeliger ensemble [1] to provide a more practical proof of the existence of AWGN-good lattices, and to characterize suitable parameters for the lattice Gaussian coding scheme proposed by Ling and Belfiore [3].

  6. 75 FR 81587 - Coding of Design Marks in Registrations

    Science.gov (United States)

    2010-12-28

    ... DEPARTMENT OF COMMERCE Patent and Trademark Office [Docket No. PTO-T-2010-0090] Coding of Design... discontinue its secondary design coding, the practice of coding newly registered trademarks in its searchable... temporarily retain the paper collection of registrations with design coding, while improving the accuracy of...

  7. Turbo-Gallager Codes: The Emergence of an Intelligent Coding ...

    African Journals Online (AJOL)

    Today, both turbo codes and low-density parity-check codes are largely superior to other code families and are being used in an increasing number of modern communication systems including 3G standards, satellite and deep space communications. However, the two codes have certain distinctive characteristics that ...

  8. Status of MARS Code

    Energy Technology Data Exchange (ETDEWEB)

    N.V. Mokhov

    2003-04-09

    Status and recent developments of the MARS 14 Monte Carlo code system for simulation of hadronic and electromagnetic cascades in shielding, accelerator and detector components in the energy range from a fraction of an electronvolt up to 100 TeV are described. these include physics models both in strong and electromagnetic interaction sectors, variance reduction techniques, residual dose, geometry, tracking, histograming. MAD-MARS Beam Line Build and Graphical-User Interface.

  9. Codes of Good Governance

    DEFF Research Database (Denmark)

    Beck Jørgensen, Torben; Sørensen, Ditte-Lene

    2013-01-01

    Good governance is a broad concept used by many international organizations to spell out how states or countries should be governed. Definitions vary, but there is a clear core of common public values, such as transparency, accountability, effectiveness, and the rule of law. It is quite likely......, transparency, neutrality, impartiality, effectiveness, accountability, and legality. The normative context of public administration, as expressed in codes, seems to ignore the New Public Management and Reinventing Government reform movements....

  10. Coding and Billing in Surgical Education: A Systems-Based Practice Education Program.

    Science.gov (United States)

    Ghaderi, Kimeya F; Schmidt, Scott T; Drolet, Brian C

    Despite increased emphasis on systems-based practice through the Accreditation Council for Graduate Medical Education core competencies, few studies have examined what surgical residents know about coding and billing. We sought to create and measure the effectiveness of a multifaceted approach to improving resident knowledge and performance of documenting and coding outpatient encounters. We identified knowledge gaps and barriers to documentation and coding in the outpatient setting. We implemented a series of educational and workflow interventions with a group of 12 residents in a surgical clinic at a tertiary care center. To measure the effect of this program, we compared billing codes for 1 year before intervention (FY2012) to prospectively collected data from the postintervention period (FY2013). All related documentation and coding were verified by study-blinded auditors. Interventions took place at the outpatient surgical clinic at Rhode Island Hospital, a tertiary-care center. A cohort of 12 plastic surgery residents ranging from postgraduate year 2 through postgraduate year 6 participated in the interventional sequence. A total of 1285 patient encounters in the preintervention group were compared with 1170 encounters in the postintervention group. Using evaluation and management codes (E&M) as a measure of documentation and coding, we demonstrated a significant and durable increase in billing with supporting clinical documentation after the intervention. For established patient visits, the monthly average E&M code level increased from 2.14 to 3.05 (p coding and billing of outpatient clinic encounters. Using externally audited coding data, we demonstrate significantly increased rates of higher complexity E&M coding in a stable patient population based on improved documentation and billing awareness by the residents. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  11. Code Modernization of VPIC

    Science.gov (United States)

    Bird, Robert; Nystrom, David; Albright, Brian

    2017-10-01

    The ability of scientific simulations to effectively deliver performant computation is increasingly being challenged by successive generations of high-performance computing architectures. Code development to support efficient computation on these modern architectures is both expensive, and highly complex; if it is approached without due care, it may also not be directly transferable between subsequent hardware generations. Previous works have discussed techniques to support the process of adapting a legacy code for modern hardware generations, but despite the breakthroughs in the areas of mini-app development, portable-performance, and cache oblivious algorithms the problem still remains largely unsolved. In this work we demonstrate how a focus on platform agnostic modern code-development can be applied to Particle-in-Cell (PIC) simulations to facilitate effective scientific delivery. This work builds directly on our previous work optimizing VPIC, in which we replaced intrinsic based vectorisation with compile generated auto-vectorization to improve the performance and portability of VPIC. In this work we present the use of a specialized SIMD queue for processing some particle operations, and also preview a GPU capable OpenMP variant of VPIC. Finally we include a lessons learnt. Work performed under the auspices of the U.S. Dept. of Energy by the Los Alamos National Security, LLC Los Alamos National Laboratory under contract DE-AC52-06NA25396 and supported by the LANL LDRD program.

  12. 76 FR 11432 - Coding of Design Marks in Registrations

    Science.gov (United States)

    2011-03-02

    ...] Coding of Design Marks in Registrations AGENCY: United States Patent and Trademark Office, Commerce... practice of coding newly registered trademarks that include a design element with design mark codes based... notice and request for comments at 75 FR 81587, proposing to discontinue a secondary system of coding...

  13. Quality Improvement of MARS Code and Establishment of Code Coupling

    International Nuclear Information System (INIS)

    Chung, Bub Dong; Jeong, Jae Jun; Kim, Kyung Doo

    2010-04-01

    The improvement of MARS code quality and coupling with regulatory auditing code have been accomplished for the establishment of self-reliable technology based regulatory auditing system. The unified auditing system code was realized also by implementing the CANDU specific models and correlations. As a part of the quality assurance activities, the various QA reports were published through the code assessments. The code manuals were updated and published a new manual which describe the new models and correlations. The code coupling methods were verified though the exercise of plant application. The education-training seminar and technology transfer were performed for the code users. The developed MARS-KS is utilized as reliable auditing tool for the resolving the safety issue and other regulatory calculations. The code can be utilized as a base technology for GEN IV reactor applications

  14. Multilingual Practices in Contemporary and Historical Contexts: Interfaces between Code-Switching and Translation

    Science.gov (United States)

    Kolehmainen, Leena; Skaffari, Janne

    2016-01-01

    This article serves as an introduction to a collection of four articles on multilingual practices in speech and writing, exploring both contemporary and historical sources. It not only introduces the articles but also discusses the scope and definitions of code-switching, attitudes towards multilingual interaction and, most pertinently, the…

  15. Code of ethics for dental researchers.

    Science.gov (United States)

    2014-01-01

    The International Association for Dental Research, in 2009, adopted a code of ethics. The code applies to members of the association and is enforceable by sanction, with the stated requirement that members are expected to inform the association in cases where they believe misconduct has occurred. The IADR code goes beyond the Belmont and Helsinki statements by virtue of covering animal research. It also addresses issues of sponsorship of research and conflicts of interest, international collaborative research, duty of researchers to be informed about applicable norms, standards of publication (including plagiarism), and the obligation of "whistleblowing" for the sake of maintaining the integrity of the dental research enterprise as a whole. The code is organized, like the ADA code, into two sections. The IADR principles are stated, but not defined, and number 12, instead of the ADA's five. The second section consists of "best practices," which are specific statements of expected or interdicted activities. The short list of definitions is useful.

  16. The path of code linting

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    Join the path of code linting and discover how it can help you reach higher levels of programming enlightenment. Today we will cover how to embrace code linters to offload cognitive strain on preserving style standards in your code base as well as avoiding error-prone constructs. Additionally, I will show you the journey ahead for integrating several code linters in the programming tools your already use with very little effort.

  17. Photovoltaic power systems and the National Electrical Code: Suggested practices

    Energy Technology Data Exchange (ETDEWEB)

    Wiles, J. [New Mexico State Univ., Las Cruces, NM (United States). Southwest Technology Development Inst.

    1996-12-01

    This guide provides information on how the National Electrical Code (NEC) applies to photovoltaic systems. The guide is not intended to supplant or replace the NEC; it paraphrases the NEC where it pertains to photovoltaic systems and should be used with the full text of the NEC. Users of this guide should be thoroughly familiar with the NEC and know the engineering principles and hazards associated with electrical and photovoltaic power systems. The information in this guide is the best available at the time of publication and is believed to be technically accurate; it will be updated frequently. Application of this information and results obtained are the responsibility of the user.

  18. Construction of new quantum MDS codes derived from constacyclic codes

    Science.gov (United States)

    Taneja, Divya; Gupta, Manish; Narula, Rajesh; Bhullar, Jaskaran

    Obtaining quantum maximum distance separable (MDS) codes from dual containing classical constacyclic codes using Hermitian construction have paved a path to undertake the challenges related to such constructions. Using the same technique, some new parameters of quantum MDS codes have been constructed here. One set of parameters obtained in this paper has achieved much larger distance than work done earlier. The remaining constructed parameters of quantum MDS codes have large minimum distance and were not explored yet.

  19. Photovoltaic Power Systems and the National Electrical Code: Suggested Practices

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-02-01

    This guide provides information on how the National Electrical Code (NEC) applies to photovoltaic systems. The guide is not intended to supplant or replace the NEC; it paraphrases the NEC where it pertains to photovoltaic systems and should be used with the full text of the NEC. Users of this guide should be thoroughly familiar with the NEC and know the engineering principles and hazards associated with electrical and photovoltaic power systems. The information in this guide is the best available at the time of publication and is believed to be technically accurate; it will be updated frequently.

  20. Decoding of concatenated codes with interleaved outer codes

    DEFF Research Database (Denmark)

    Justesen, Jørn; Høholdt, Tom; Thommesen, Christian

    2004-01-01

    Recently Bleichenbacher et al. proposed a decoding algorithm for interleaved (N, K) Reed-Solomon codes, which allows close to N-K errors to be corrected in many cases. We discuss the application of this decoding algorithm to concatenated codes.......Recently Bleichenbacher et al. proposed a decoding algorithm for interleaved (N, K) Reed-Solomon codes, which allows close to N-K errors to be corrected in many cases. We discuss the application of this decoding algorithm to concatenated codes....

  1. Corporate governance codes and their contents : An analysis of Eastern European codes

    NARCIS (Netherlands)

    Hermes, Niels; Postma, Theo J. B. M.; Zivkov, Orestis

    2007-01-01

    Existing literature suggests that the contents of corporate governance codes are similar due to external forces, such as increased integration of countries in the global economy, the increased role of foreign institutional investors and recommendations on corporate governance practices of

  2. Introduction of SCIENCE code package

    International Nuclear Information System (INIS)

    Lu Haoliang; Li Jinggang; Zhu Ya'nan; Bai Ning

    2012-01-01

    The SCIENCE code package is a set of neutronics tools based on 2D assembly calculations and 3D core calculations. It is made up of APOLLO2F, SMART and SQUALE and used to perform the nuclear design and loading pattern analysis for the reactors on operation or under construction of China Guangdong Nuclear Power Group. The purpose of paper is to briefly present the physical and numerical models used in each computation codes of the SCIENCE code pack age, including the description of the general structure of the code package, the coupling relationship of APOLLO2-F transport lattice code and SMART core nodal code, and the SQUALE code used for processing the core maps. (authors)

  3. Elements of algebraic coding systems

    CERN Document Server

    Cardoso da Rocha, Jr, Valdemar

    2014-01-01

    Elements of Algebraic Coding Systems is an introductory text to algebraic coding theory. In the first chapter, you'll gain inside knowledge of coding fundamentals, which is essential for a deeper understanding of state-of-the-art coding systems. This book is a quick reference for those who are unfamiliar with this topic, as well as for use with specific applications such as cryptography and communication. Linear error-correcting block codes through elementary principles span eleven chapters of the text. Cyclic codes, some finite field algebra, Goppa codes, algebraic decoding algorithms, and applications in public-key cryptography and secret-key cryptography are discussed, including problems and solutions at the end of each chapter. Three appendices cover the Gilbert bound and some related derivations, a derivation of the Mac- Williams' identities based on the probability of undetected error, and two important tools for algebraic decoding-namely, the finite field Fourier transform and the Euclidean algorithm f...

  4. Code of Practice for Organic Food Processing. With contributions from Ursula Kretzschmar, Angelika Ploeger and Otto Schmid.

    OpenAIRE

    Beck, Alexander

    2006-01-01

    The consumers of “low input” and organic foods have specific expectations with respect to quality parameters of processed food. These may relate to the degree of processing, concern about specific additives, nutritional composition, integrity or whole food concepts, the degree of convenience, the level of energy use and transportation distances, but also to food safety. For many processors, fulfilling all of these expectations represents a tremendous challenge in understanding and impleme...

  5. Converter of a continuous code into the Grey code

    International Nuclear Information System (INIS)

    Gonchar, A.I.; TrUbnikov, V.R.

    1979-01-01

    Described is a converter of a continuous code into the Grey code used in a 12-charged precision amplitude-to-digital converter to decrease the digital component of spectrometer differential nonlinearity to +0.7% in the 98% range of the measured band. To construct the converter of a continuous code corresponding to the input signal amplitude into the Grey code used is the regularity in recycling of units and zeroes in each discharge of the Grey code in the case of a continuous change of the number of pulses of a continuous code. The converter is constructed on the elements of 155 series, the frequency of continuous code pulse passing at the converter input is 25 MHz

  6. Tibetan/English Code-Switching Practices in the Tibetan Diaspora Classrooms: Perceptions of Select 6th Grade Teachers

    Science.gov (United States)

    Phuntsog, Nawang

    2018-01-01

    The role of the mother tongue-based schooling of Tibetan children has been debated passionately in the Tibetan Diaspora since 1985. Dharamsala, India, the seat of the Tibetan Diaspora, is the research site. Tibetan children are instructed in all school subjects in the Tibetan language up until 6th grade at which time the language of instruction is…

  7. Water quality, biodiversity, and codes of practice in relation to harvesting forest plantations in streamside management zones

    Science.gov (United States)

    Daniel G. Neary; Philip J. Smethurst; Brenda Baillie; Kevin C. Petrone

    2011-01-01

    Streamside management zones (SMZs) are special landscape units that include riparian areas and adjacent lands that mitigate the movement of sediment, nutrients and other chemicals from upland forest and agricultural management areas into streams. The size, shape, and management of SMZs are governed by various combinations of economic, ecological, and regulatory factors...

  8. CERT Resilience Management Model (RMM) v1.1: Code of Practice Crosswalk Commercial Version 1.1

    Science.gov (United States)

    2011-10-01

    2005 (E) ISO/IEC 24762: 2008 (E) ISO/IEC 27002: 2005 (E) ISO/IEC 27005: 2008 (E) ISO/IEC 31000: 2009 (E) NFPA 1600 PCI: 2009 HRM – Human ...Subpractices 1. Obtain written approval from line of business and organizational unit managers, asset owners, and human resources staff for...sup- ports their desired level of process maturity and improvement. Another important objective of this document is to permit organizations to use

  9. Code of practice for in-core instrumentation for neutron fluence rate (flux) measurements in power reactors

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    This standard applies to in-core (on-line) neutron detectors and instrumentation which is designed for safety, information or control purposes. It also applies to components in so far as these components are contained within the primary envelope of the reactor. The detector types usually used are dc ionization chambers and self-powered neutron detectors

  10. The Lambert Code: Can We Define Best Practice?

    Science.gov (United States)

    Shattock, Michael

    2004-01-01

    The article explores the proposals put forward in the Lambert Report for reforms in university governance. It compares the recommendation for a Code with the analogue Combined Code which regulates corporate governance in companies and draws a distinction between attempts, from the Cadbury Report in 1992 to the Higgs Review in 2003, to create board…

  11. The IPEM code of practice for determination of the reference air kerma rate for HDR 192Ir brachytherapy sources based on the NPL air kerma standard

    International Nuclear Information System (INIS)

    Bidmead, A M; Sander, T; Nutbrown, R F; Locks, S M; Lee, C D; Aird, E G A; Flynn, A

    2010-01-01

    This paper contains the recommendations of the high dose rate (HDR) brachytherapy working party of the UK Institute of Physics and Engineering in Medicine (IPEM). The recommendations consist of a Code of Practice (COP) for the UK for measuring the reference air kerma rate (RAKR) of HDR 192 Ir brachytherapy sources. In 2004, the National Physical Laboratory (NPL) commissioned a primary standard for the realization of RAKR of HDR 192 Ir brachytherapy sources. This has meant that it is now possible to calibrate ionization chambers directly traceable to an air kerma standard using an 192 Ir source (Sander and Nutbrown 2006 NPL Report DQL-RD 004 (Teddington: NPL) http://publications.npl.co.uk). In order to use the source specification in terms of either RAKR, .K R (ICRU 1985 ICRU Report No 38 (Washington, DC: ICRU); ICRU 1997 ICRU Report No 58 (Bethesda, MD: ICRU)), or air kerma strength, S K (Nath et al 1995 Med. Phys. 22 209-34), it has been necessary to develop algorithms that can calculate the dose at any point around brachytherapy sources within the patient tissues. The AAPM TG-43 protocol (Nath et al 1995 Med. Phys. 22 209-34) and the 2004 update TG-43U1 (Rivard et al 2004 Med. Phys. 31 633-74) have been developed more fully than any other protocol and are widely used in commercial treatment planning systems. Since the TG-43 formalism uses the quantity air kerma strength, whereas this COP uses RAKR, a unit conversion from RAKR to air kerma strength was included in the appendix to this COP. It is recommended that the measured RAKR determined with a calibrated well chamber traceable to the NPL 192 Ir primary standard is used in the treatment planning system. The measurement uncertainty in the source calibration based on the system described in this COP has been reduced considerably compared to other methods based on interpolation techniques.

  12. The reason for having a code of pharmaceutical ethics: Spanish Pharmacists Code of Ethics

    Directory of Open Access Journals (Sweden)

    Ana Mulet Alberola

    2017-05-01

    Full Text Available The pharmacist profession needs its own code of conduct set out in writing to serve as a stimulus to pharmacists in their day-to-day work in the different areas of pharmacy, in conjunction always with each individual pharmacist´s personal commitment to their patients, to other healthcare professionals and to society. An overview is provided of the different codes of ethics for pharmacists on the national and international scale, the most up-to-date code for 2015 being presented as a set of principles which must guide a pharmacutical conduct from the standpoint of deliberative judgment. The difference between codes of ethics and codes of practice is discussed. In the era of massive-scale collaboration, this code is a project holding bright prospects for the future. Each individual pharmacutical attitude in practicing their profession must be identified with the pursuit of excellence in their own personal practice for the purpose of achieving the ethical and professional values above and beyond complying with regulations and code of practice.

  13. The reason for having a code of pharmaceutical ethics: Spanish Pharmacists Code of Ethics.

    Science.gov (United States)

    Barreda Hernández, Dolores; Mulet Alberola, Ana; González Bermejo, Diana; Soler Company, Enrique

    2017-05-01

    The pharmacist profession needs its own code of conduct set out in writing to serve as a stimulus to pharmacists in their day-to-day work in the different areas of pharmacy, in conjunction always with each individual pharmacist´s personal commitment to their patients, to other healthcare professionals and to society. An overview is provided of the different codes of ethics for pharmacists on the national and international scale, the most up-to-date code for 2015 being presented as a set of principles which must guide a pharmacutical conduct from the standpoint of deliberative judgment. The difference between codes of ethics and codes of practice is discussed. In the era of massive-scale collaboration, this code is a project holding bright prospects for the future. Each individual pharmacutical attitude in practicing their profession must be identified with the pursuit of excellence in their own personal practice for the purpose of achieving the ethical and professional values above and beyond complying with regulations and code of practice. Copyright AULA MEDICA EDICIONES 2017. Published by AULA MEDICA. All rights reserved.

  14. European model code of safe practice for the prevention of ground and surface water pollution by oil from storage tanks and during the transport of oil

    Energy Technology Data Exchange (ETDEWEB)

    1974-01-01

    The code outlines general requirements for pollution prevention and provides guidelines for corrosion protection of mild steel tanks, pipe and fitting assemblies, and for storage tank installations. The transportation and delivery of petroleum fuels are discussed, and operating procedures are suggested.

  15. Multiple-Symbol Noncoherent Decoding of Uncoded and Convolutionally Codes Continous Phase Modulation

    Science.gov (United States)

    Divsalar, D.; Raphaeli, D.

    2000-01-01

    Recently, a method for combined noncoherent detection and decoding of trellis-codes (noncoherent coded modulation) has been proposed, which can practically approach the performance of coherent detection.

  16. User manual of UNF code

    International Nuclear Information System (INIS)

    Zhang Jingshang

    2001-01-01

    The UNF code (2001 version) written in FORTRAN-90 is developed for calculating fast neutron reaction data of structure materials with incident energies from about 1 Kev up to 20 Mev. The code consists of the spherical optical model, the unified Hauser-Feshbach and exciton model. The man nal of the UNF code is available for users. The format of the input parameter files and the output files, as well as the functions of flag used in UNF code, are introduced in detail, and the examples of the format of input parameters files are given

  17. Time-varying block codes for synchronisation errors: maximum a posteriori decoder and practical issues

    Directory of Open Access Journals (Sweden)

    Johann A. Briffa

    2014-06-01

    Full Text Available In this study, the authors consider time-varying block (TVB codes, which generalise a number of previous synchronisation error-correcting codes. They also consider various practical issues related to maximum a posteriori (MAP decoding of these codes. Specifically, they give an expression for the expected distribution of drift between transmitter and receiver because of synchronisation errors. They determine an appropriate choice for state space limits based on the drift probability distribution. In turn, they obtain an expression for the decoder complexity under given channel conditions in terms of the state space limits used. For a given state space, they also give a number of optimisations that reduce the algorithm complexity with no further loss of decoder performance. They also show how the MAP decoder can be used in the absence of known frame boundaries, and demonstrate that an appropriate choice of decoder parameters allows the decoder to approach the performance when frame boundaries are known, at the expense of some increase in complexity. Finally, they express some existing constructions as TVB codes, comparing performance with published results and showing that improved performance is possible by taking advantage of the flexibility of TVB codes.

  18. The Nursing Code of Ethics: Its Value, Its History.

    Science.gov (United States)

    Epstein, Beth; Turner, Martha

    2015-05-31

    To practice competently and with integrity, today's nurses must have in place several key elements that guide the profession, such as an accreditation process for education, a rigorous system for licensure and certification, and a relevant code of ethics. The American Nurses Association has guided and supported nursing practice through creation and implementation of a nationally accepted Code of Ethics for Nurses with Interpretive Statements. This article will discuss ethics in society, professions, and nursing and illustrate how a professional code of ethics can guide nursing practice in a variety of settings. We also offer a brief history of the Code of Ethics, discuss the modern Code of Ethics, and describe the importance of periodic revision, including the inclusive and thorough process used to develop the 2015 Code and a summary of recent changes. Finally, the article provides implications for practicing nurses to assure that this document is a dynamic, useful resource in a variety of healthcare settings.

  19. Interrelations of codes in human semiotic systems.

    OpenAIRE

    Somov, Georgij

    2016-01-01

    Codes can be viewed as mechanisms that enable relations of signs and their components, i.e., semiosis is actualized. The combinations of these relations produce new relations as new codes are building over other codes. Structures appear in the mechanisms of codes. Hence, codes can be described as transformations of structures from some material systems into others. Structures belong to different carriers, but exist in codes in their "pure" form. Building of codes over other codes fosters t...

  20. LDGM Codes for Channel Coding and Joint Source-Channel Coding of Correlated Sources

    Directory of Open Access Journals (Sweden)

    Javier Garcia-Frias

    2005-05-01

    Full Text Available We propose a coding scheme based on the use of systematic linear codes with low-density generator matrix (LDGM codes for channel coding and joint source-channel coding of multiterminal correlated binary sources. In both cases, the structures of the LDGM encoder and decoder are shown, and a concatenated scheme aimed at reducing the error floor is proposed. Several decoding possibilities are investigated, compared, and evaluated. For different types of noisy channels and correlation models, the resulting performance is very close to the theoretical limits.

  1. Further Generalisations of Twisted Gabidulin Codes

    DEFF Research Database (Denmark)

    Puchinger, Sven; Rosenkilde, Johan Sebastian Heesemann; Sheekey, John

    2017-01-01

    We present a new family of maximum rank distance (MRD) codes. The new class contains codes that are neither equivalent to a generalised Gabidulin nor to a twisted Gabidulin code, the only two known general constructions of linear MRD codes.......We present a new family of maximum rank distance (MRD) codes. The new class contains codes that are neither equivalent to a generalised Gabidulin nor to a twisted Gabidulin code, the only two known general constructions of linear MRD codes....

  2. Verification of reactor safety codes

    International Nuclear Information System (INIS)

    Murley, T.E.

    1978-01-01

    The safety evaluation of nuclear power plants requires the investigation of wide range of potential accidents that could be postulated to occur. Many of these accidents deal with phenomena that are outside the range of normal engineering experience. Because of the expense and difficulty of full scale tests covering the complete range of accident conditions, it is necessary to rely on complex computer codes to assess these accidents. The central role that computer codes play in safety analyses requires that the codes be verified, or tested, by comparing the code predictions with a wide range of experimental data chosen to span the physical phenomena expected under potential accident conditions. This paper discusses the plans of the Nuclear Regulatory Commission for verifying the reactor safety codes being developed by NRC to assess the safety of light water reactors and fast breeder reactors. (author)

  3. Development status of TUF code

    International Nuclear Information System (INIS)

    Liu, W.S.; Tahir, A.; Zaltsgendler

    1996-01-01

    An overview of the important development of the TUF code in 1995 is presented. The development in the following areas is presented: control of round-off error propagation, gas resolution and release models, and condensation induced water hammer. This development is mainly generated from station requests for operational support and code improvement. (author)

  4. Survey of coded aperture imaging

    International Nuclear Information System (INIS)

    Barrett, H.H.

    1975-01-01

    The basic principle and limitations of coded aperture imaging for x-ray and gamma cameras are discussed. Current trends include (1) use of time varying apertures, (2) use of ''dilute'' apertures with transmission much less than 50%, and (3) attempts to derive transverse tomographic sections, unblurred by other planes, from coded images

  5. Code for ethical international recruitment practices: the CGFNS alliance case study.

    Science.gov (United States)

    Shaffer, Franklin A; Bakhshi, Mukul; Dutka, Julia To; Phillips, Janice

    2016-06-30

    Projections indicate a global workforce shortage of approximately 4.3 million across the health professions. The need to ensure an adequate supply of health workers worldwide has created a context for the increased global migration of these professionals. The global trend in the migration of health professionals has given rise to the international recruitment industry to facilitate the passage of health workers from source to destination countries. This is particularly the case in the United States, where the majority of immigrant health professionals have come by way of the recruiting industry. This industry is largely unregulated in the United States as well as in many other countries, for which voluntary codes have been used as a means to increase transparency of the recruitment process, shape professional conduct, and mitigate harm to foreign-educated health workers. The CGFNS Alliance case study presented herein describes a multi-stakeholder effort in the United States to promote ethical recruitment practices. Such codes not only complement the WHO Global Code of Practice but are necessary to maximize the impact of these global standards on local settings. This case study offers both a historical perspective and a conceptual framework for examining the multiplicity of factors affecting the migration of human resources for health. The lessons learned provide critical insights into the factors pertaining to the relevancy and effectiveness of the WHO Code from the perspectives of both source and destination countries. This study provides a conceptual model for examining the usefulness of the WHO Code as well as how best to ensure its viability, sustainability, relevancy, and effectiveness in the global environment. This case study concludes with recommendations for evolving business models that need to be in place to strengthen the effectiveness of the WHO Code in the marketplace and to ensure its impact on the international recruitment industry in advancing

  6. Dynamic benchmarking of simulation codes

    International Nuclear Information System (INIS)

    Henry, R.E.; Paik, C.Y.; Hauser, G.M.

    1996-01-01

    Computer simulation of nuclear power plant response can be a full-scope control room simulator, an engineering simulator to represent the general behavior of the plant under normal and abnormal conditions, or the modeling of the plant response to conditions that would eventually lead to core damage. In any of these, the underlying foundation for their use in analysing situations, training of vendor/utility personnel, etc. is how well they represent what has been known from industrial experience, large integral experiments and separate effects tests. Typically, simulation codes are benchmarked with some of these; the level of agreement necessary being dependent upon the ultimate use of the simulation tool. However, these analytical models are computer codes, and as a result, the capabilities are continually enhanced, errors are corrected, new situations are imposed on the code that are outside of the original design basis, etc. Consequently, there is a continual need to assure that the benchmarks with important transients are preserved as the computer code evolves. Retention of this benchmarking capability is essential to develop trust in the computer code. Given the evolving world of computer codes, how is this retention of benchmarking capabilities accomplished? For the MAAP4 codes this capability is accomplished through a 'dynamic benchmarking' feature embedded in the source code. In particular, a set of dynamic benchmarks are included in the source code and these are exercised every time the archive codes are upgraded and distributed to the MAAP users. Three different types of dynamic benchmarks are used: plant transients; large integral experiments; and separate effects tests. Each of these is performed in a different manner. The first is accomplished by developing a parameter file for the plant modeled and an input deck to describe the sequence; i.e. the entire MAAP4 code is exercised. The pertinent plant data is included in the source code and the computer

  7. Application of coupled codes for safety analysis and licensing issues

    International Nuclear Information System (INIS)

    Langenbuch, S.; Velkov, K.

    2006-01-01

    An overview is given on the development and the advantages of coupled codes which integrate 3D neutron kinetics into thermal-hydraulic system codes. The work performed within GRS by coupling the thermal-hydraulic system code ATHLET and the 3D neutronics code QUABOX/CUBBOX is described as an example. The application of the coupled codes as best-estimate simulation tools for safety analysis is discussed. Some examples from German licensing practices are given which demonstrate how the improved analytical methods of coupled codes have contributed to solve licensing issues related to optimized and more economical use of fuel. (authors)

  8. A Code of Ethics for Democratic Leadership

    Science.gov (United States)

    Molina, Ricardo; Klinker, JoAnn Franklin

    2012-01-01

    Democratic leadership rests on sacred values, awareness, judgement, motivation and courage. Four turning points in a 38-year school administrator's career revealed decision-making in problematic moments stemmed from values in a personal and professional code of ethics. Reflection on practice and theory added vocabulary and understanding to make…

  9. Distributed source coding of video

    DEFF Research Database (Denmark)

    Forchhammer, Søren; Van Luong, Huynh

    2015-01-01

    A foundation for distributed source coding was established in the classic papers of Slepian-Wolf (SW) [1] and Wyner-Ziv (WZ) [2]. This has provided a starting point for work on Distributed Video Coding (DVC), which exploits the source statistics at the decoder side offering shifting processing...... steps, conventionally performed at the video encoder side, to the decoder side. Emerging applications such as wireless visual sensor networks and wireless video surveillance all require lightweight video encoding with high coding efficiency and error-resilience. The video data of DVC schemes differ from...... the assumptions of SW and WZ distributed coding, e.g. by being correlated in time and nonstationary. Improving the efficiency of DVC coding is challenging. This paper presents some selected techniques to address the DVC challenges. Focus is put on pin-pointing how the decoder steps are modified to provide...

  10. "Only When I Am Not Ashamed of Myself Can I Teach Others": Preservice English-Language Teachers in Vietnam and Code-Switching Practices

    Science.gov (United States)

    Vu, Hai Ha

    2017-01-01

    As the younger generation in Vietnam increasingly switches between the English and the Vietnamese languages, numerous linguistic and sociocultural strictures arise. Foregrounding the preservice English-language teachers of this generation, this article locates them in a dilemma between the discourse of globalization and their code-switching…

  11. Revision of the recommended international general standard for irradiated foods and of the recommended international code of practice for the operation of radiation facilities used for the treatment of foods

    International Nuclear Information System (INIS)

    1981-11-01

    In view of the findings and statements of the Joint FAO/IAEA/WHO Expert Committee on the Wholesomeness of Irradiated Food, convened in Geneva from 27 October to 3 November 1980, a Consultation Group, convened in Geneva from 1 to 3 July 1981 suggested the revision of the Recommended International General Standard for Irradiated Foods and of the Recommended International Code of Practice for the Operation of Radiation Facilities. The proposed changes are given and justified and the revised wording of the documents presented

  12. Electronic Code of Federal Regulations

    Data.gov (United States)

    National Archives and Records Administration — The Electronic Code of Federal Regulations (e-CFR) is the codification of the general and permanent rules published in the Federal Register by the executive...

  13. The intercomparison of aerosol codes

    International Nuclear Information System (INIS)

    Dunbar, I.H.; Fermandjian, J.; Gauvain, J.

    1988-01-01

    The behavior of aerosols in a reactor containment vessel following a severe accident could be an important determinant of the accident source term to the environment. Various processes result in the deposition of the aerosol onto surfaces within the containment, from where they are much less likely to be released. Some of these processes are very sensitive to particle size, so it is important to model the aerosol growth processes: agglomeration and condensation. A number of computer codes have been written to model growth and deposition processes. They have been tested against each other in a series of code comparison exercises. These exercises have investigated sensitivities to physical and numerical assumptions and have also proved a useful means of quality control for the codes. Various exercises in which code predictions are compared with experimental results are now under way

  14. Squares of Random Linear Codes

    DEFF Research Database (Denmark)

    Cascudo Pueyo, Ignacio; Cramer, Ronald; Mirandola, Diego

    2015-01-01

    a positive answer, for codes of dimension $k$ and length roughly $\\frac{1}{2}k^2$ or smaller. Moreover, the convergence speed is exponential if the difference $k(k+1)/2-n$ is at least linear in $k$. The proof uses random coding and combinatorial arguments, together with algebraic tools involving the precise......Given a linear code $C$, one can define the $d$-th power of $C$ as the span of all componentwise products of $d$ elements of $C$. A power of $C$ may quickly fill the whole space. Our purpose is to answer the following question: does the square of a code ``typically'' fill the whole space? We give...

  15. Adaptive decoding of convolutional codes

    Directory of Open Access Journals (Sweden)

    K. Hueske

    2007-06-01

    Full Text Available Convolutional codes, which are frequently used as error correction codes in digital transmission systems, are generally decoded using the Viterbi Decoder. On the one hand the Viterbi Decoder is an optimum maximum likelihood decoder, i.e. the most probable transmitted code sequence is obtained. On the other hand the mathematical complexity of the algorithm only depends on the used code, not on the number of transmission errors. To reduce the complexity of the decoding process for good transmission conditions, an alternative syndrome based decoder is presented. The reduction of complexity is realized by two different approaches, the syndrome zero sequence deactivation and the path metric equalization. The two approaches enable an easy adaptation of the decoding complexity for different transmission conditions, which results in a trade-off between decoding complexity and error correction performance.

  16. Adaptive decoding of convolutional codes

    Science.gov (United States)

    Hueske, K.; Geldmacher, J.; Götze, J.

    2007-06-01

    Convolutional codes, which are frequently used as error correction codes in digital transmission systems, are generally decoded using the Viterbi Decoder. On the one hand the Viterbi Decoder is an optimum maximum likelihood decoder, i.e. the most probable transmitted code sequence is obtained. On the other hand the mathematical complexity of the algorithm only depends on the used code, not on the number of transmission errors. To reduce the complexity of the decoding process for good transmission conditions, an alternative syndrome based decoder is presented. The reduction of complexity is realized by two different approaches, the syndrome zero sequence deactivation and the path metric equalization. The two approaches enable an easy adaptation of the decoding complexity for different transmission conditions, which results in a trade-off between decoding complexity and error correction performance.

  17. Variation in National ACGME Case Log Data for Pediatric Orthopaedic Fellowships: Are Fellow Coding Practices Responsible?

    Science.gov (United States)

    McClure, Philip K; Woiczik, Marcella; Karol, Lori; Sankar, Wudbhav N

    The introduction of the 80-hour work week for Accreditation Council for Graduate Medical Education (ACGME) accredited fellowship programs initiated many efforts to optimize surgical training. One particular area of interest is on recording and tracking surgical experiences. The current standard is logging cases based on Current Procedural Terminology codes, which are primarily designed for billing. Proposed guidelines from the ACGME regarding logging exist, but their implementation is unknown, as is the variation in case volume across fellowship programs. The purpose of this study was to investigate variability in the national case log data, and explore potential sources of variation using fellow surveys. National ACGME case log data for pediatric orthopaedic fellowships from 2012 to 2015 were reviewed, with particular attention to the domains of spine, pelvis/hip, arthroscopy, trauma, and other (which includes clubfoot casting). To explore potential sources of case log variability, a survey on case logging behavior was distributed to all pediatric orthopaedic fellows for the academic year 2015 to 2016. Reported experiences based on ACGME case logs varied widely between fellows with percentage difference of up to 100% in all areas. Similarly, wide variability is present in coding practices of pediatric orthopaedic fellows, who often lack formal education on the topic of appropriate coding/logging. In the survey, hypothetical case scenarios had an absolute difference in recorded codes of up to 13 and a percentage difference of up to 100%. ACGME case log data for pediatric orthopaedic fellowships demonstrates wide variability in reported surgical experiences. This variability may be due, in part, to differences in logging practices by individual fellows. This observation makes meaningful interpretation of national data on surgical volume challenging. Proposed surgical experience minimums should be interpreted in light of these data, and may not be advisable unless

  18. Description of the COMRADEX code

    International Nuclear Information System (INIS)

    Spangler, G.W.; Boling, M.; Rhoades, W.A.; Willis, C.A.

    1967-01-01

    The COMRADEX Code is discussed briefly and instructions are provided for the use of the code. The subject code was developed for calculating doses from hypothetical power reactor accidents. It permits the user to analyze four successive levels of containment with time-varying leak rates. Filtration, cleanup, fallout and plateout in each containment shell can also be analyzed. The doses calculated include the direct gamma dose from the containment building, the internal doses to as many as 14 organs including the thyroid, bone, lung, etc. from inhaling the contaminated air, and the external gamma doses from the cloud. While further improvements are needed, such as a provision for calculating doses from fallout, rainout and washout, the present code capabilities have a wide range of applicability for reactor accident analysis

  19. Verification of ONED90 code

    International Nuclear Information System (INIS)

    Chang, Jong Hwa; Lee, Ki Bog; Zee, Sung Kyun; Lee, Chang Ho

    1993-12-01

    ONED90 developed by KAERI is a 1-dimensional 2-group diffusion theory code. For nuclear design and reactor simulation, the usage of ONED90 encompasses core follow calculation, load follow calculation, plant power control simulation, xenon oscillation simulation and control rod maneuvering, etc. In order to verify the validity of ONED90 code, two well-known benchmark problems are solved by ONED90 shows very similar result to reference solution. (Author) 11 refs., 5 figs., 13 tabs

  20. Code-Mixing and Code Switchingin The Process of Learning

    Directory of Open Access Journals (Sweden)

    Diyah Atiek Mustikawati

    2016-09-01

    Full Text Available This study aimed to describe a form of code switching and code mixing specific form found in the teaching and learning activities in the classroom as well as determining factors influencing events stand out that form of code switching and code mixing in question.Form of this research is descriptive qualitative case study which took place in Al Mawaddah Boarding School Ponorogo. Based on the analysis and discussion that has been stated in the previous chapter that the form of code mixing and code switching learning activities in Al Mawaddah Boarding School is in between the use of either language Java language, Arabic, English and Indonesian, on the use of insertion of words, phrases, idioms, use of nouns, adjectives, clauses, and sentences. Code mixing deciding factor in the learning process include: Identification of the role, the desire to explain and interpret, sourced from the original language and its variations, is sourced from a foreign language. While deciding factor in the learning process of code, includes: speakers (O1, partners speakers (O2, the presence of a third person (O3, the topic of conversation, evoke a sense of humour, and just prestige. The significance of this study is to allow readers to see the use of language in a multilingual society, especially in AL Mawaddah boarding school about the rules and characteristics variation in the language of teaching and learning activities in the classroom. Furthermore, the results of this research will provide input to the ustadz / ustadzah and students in developing oral communication skills and the effectiveness of teaching and learning strategies in boarding schools.

  1. Code of conduct for scientists (abstract)

    International Nuclear Information System (INIS)

    Khurshid, S.J.

    2011-01-01

    The emergence of advanced technologies in the last three decades and extraordinary progress in our knowledge on the basic Physical, Chemical and Biological properties of living matter has offered tremendous benefits to human beings but simultaneously highlighted the need of higher awareness and responsibility by the scientists of 21 century. Scientist is not born with ethics, nor science is ethically neutral, but there are ethical dimensions to scientific work. There is need to evolve an appropriate Code of Conduct for scientist particularly working in every field of Science. However, while considering the contents, promulgation and adaptation of Codes of Conduct for Scientists, a balance is needed to be maintained between freedom of scientists and at the same time some binding on them in the form of Code of Conducts. The use of good and safe laboratory procedures, whether, codified by law or by common practice must also be considered as part of the moral duties of scientists. It is internationally agreed that a general Code of Conduct can't be formulated for all the scientists universally, but there should be a set of 'building blocks' aimed at establishing the Code of Conduct for Scientists either as individual researcher or responsible for direction, evaluation, monitoring of scientific activities at the institutional or organizational level. (author)

  2. The commerce of professional psychology and the new ethics code.

    Science.gov (United States)

    Koocher, G P

    1994-11-01

    The 1992 version of the American Psychological Association's Ethical Principles of Psychologists and Code of Conduct brings some changes in requirements and new specificity to the practice of psychology. The impact of the new code on therapeutic contracts, informed consent to psychological services, advertising, financial aspects of psychological practice, and other topics related to the commerce of professional psychology are discussed. The genesis of many new thrusts in the code is reviewed from the perspective of psychological service provider. Specific recommendations for improved attention to ethical matters in professional practice are made.

  3. The Minimum Distance of Graph Codes

    DEFF Research Database (Denmark)

    Høholdt, Tom; Justesen, Jørn

    2011-01-01

    We study codes constructed from graphs where the code symbols are associated with the edges and the symbols connected to a given vertex are restricted to be codewords in a component code. In particular we treat such codes from bipartite expander graphs coming from Euclidean planes and other...... geometries. We give results on the minimum distances of the codes....

  4. CONSTRUCTION OF REGULAR LDPC LIKE CODES BASED ON FULL RANK CODES AND THEIR ITERATIVE DECODING USING A PARITY CHECK TREE

    Directory of Open Access Journals (Sweden)

    H. Prashantha Kumar

    2011-09-01

    Full Text Available Low density parity check (LDPC codes are capacity-approaching codes, which means that practical constructions exist that allow the noise threshold to be set very close to the theoretical Shannon limit for a memory less channel. LDPC codes are finding increasing use in applications like LTE-Networks, digital television, high density data storage systems, deep space communication systems etc. Several algebraic and combinatorial methods are available for constructing LDPC codes. In this paper we discuss a novel low complexity algebraic method for constructing regular LDPC like codes derived from full rank codes. We demonstrate that by employing these codes over AWGN channels, coding gains in excess of 2dB over un-coded systems can be realized when soft iterative decoding using a parity check tree is employed.

  5. The WIMS familly of codes

    International Nuclear Information System (INIS)

    Askew, J.

    1981-01-01

    WIMS-D4 is the latest version of the original form of the Winfrith Improved Multigroup Scheme, developed in 1963-5 for lattice calculations on all types of thermal reactor, whether moderated by graphite, heavy or light water. The code, in earlier versions, has been available from the NEA code centre for a number of years in both IBM and CDC dialects of FORTRAN. An important feature of this code was its rapid, accurate deterministic system for treating resonance capture in heavy nuclides, and capable of dealing with both regular pin lattices and with cluster geometries typical of pressure tube and gas cooled reactors. WIMS-E is a compatible code scheme in which each calcultation step is bounded by standard interfaces on disc or tape. The interfaces contain files of information in a standard form, restricted to numbers representing physically meaningful quantities such as cross-sections and fluxes. Restriction of code intercommunication to this channel limits the possible propagation of errors. A module is capable of transforming WIMS-D output into the standard interface form and hence the two schemes can be linked if required. LWR-WIMS was developed in 1970 as a method of calculating LWR reloads for the fuel fabricators BNFL/GUNF. It uses the WIMS-E library and a number of the same module

  6. International assessment of PCA codes

    International Nuclear Information System (INIS)

    Neymotin, L.; Lui, C.; Glynn, J.; Archarya, S.

    1993-11-01

    Over the past three years (1991-1993), an extensive international exercise for intercomparison of a group of six Probabilistic Consequence Assessment (PCA) codes was undertaken. The exercise was jointly sponsored by the Commission of European Communities (CEC) and OECD Nuclear Energy Agency. This exercise was a logical continuation of a similar effort undertaken by OECD/NEA/CSNI in 1979-1981. The PCA codes are currently used by different countries for predicting radiological health and economic consequences of severe accidents at nuclear power plants (and certain types of non-reactor nuclear facilities) resulting in releases of radioactive materials into the atmosphere. The codes participating in the exercise were: ARANO (Finland), CONDOR (UK), COSYMA (CEC), LENA (Sweden), MACCS (USA), and OSCAAR (Japan). In parallel with this inter-code comparison effort, two separate groups performed a similar set of calculations using two of the participating codes, MACCS and COSYMA. Results of the intercode and inter-MACCS comparisons are presented in this paper. The MACCS group included four participants: GREECE: Institute of Nuclear Technology and Radiation Protection, NCSR Demokritos; ITALY: ENEL, ENEA/DISP, and ENEA/NUC-RIN; SPAIN: Universidad Politecnica de Madrid (UPM) and Consejo de Seguridad Nuclear; USA: Brookhaven National Laboratory, US NRC and DOE

  7. Translation of ARAC computer codes

    International Nuclear Information System (INIS)

    Takahashi, Kunio; Chino, Masamichi; Honma, Toshimitsu; Ishikawa, Hirohiko; Kai, Michiaki; Imai, Kazuhiko; Asai, Kiyoshi

    1982-05-01

    In 1981 we have translated the famous MATHEW, ADPIC and their auxiliary computer codes for CDC 7600 computer version to FACOM M-200's. The codes consist of a part of the Atmospheric Release Advisory Capability (ARAC) system of Lawrence Livermore National Laboratory (LLNL). The MATHEW is a code for three-dimensional wind field analysis. Using observed data, it calculates the mass-consistent wind field of grid cells by a variational method. The ADPIC is a code for three-dimensional concentration prediction of gases and particulates released to the atmosphere. It calculates concentrations in grid cells by the particle-in-cell method. They are written in LLLTRAN, i.e., LLNL Fortran language and are implemented on the CDC 7600 computers of LLNL. In this report, i) the computational methods of the MATHEW/ADPIC and their auxiliary codes, ii) comparisons of the calculated results with our JAERI particle-in-cell, and gaussian plume models, iii) translation procedures from the CDC version to FACOM M-200's, are described. Under the permission of LLNL G-Division, this report is published to keep the track of the translation procedures and to serve our JAERI researchers for comparisons and references of their works. (author)

  8. Comparison of sodium aerosol codes

    International Nuclear Information System (INIS)

    Dunbar, I.H.; Fermandjian, J.; Bunz, H.; L'homme, A.; Lhiaubet, G.; Himeno, Y.; Kirby, C.R.; Mitsutsuka, N.

    1984-01-01

    Although hypothetical fast reactor accidents leading to severe core damage are very low probability events, their consequences are to be assessed. During such accidents, one can envisage the ejection of sodium, mixed with fuel and fission products, from the primary circuit into the secondary containment. Aerosols can be formed either by mechanical dispersion of the molten material or as a result of combustion of the sodium in the mixture. Therefore considerable effort has been devoted to study the different sodium aerosol phenomena. To ensure that the problems of describing the physical behaviour of sodium aerosols were adequately understood, a comparison of the codes being developed to describe their behaviour was undertaken. The comparison consists of two parts. The first is a comparative study of the computer codes used to predict aerosol behaviour during a hypothetical accident. It is a critical review of documentation available. The second part is an exercise in which code users have run their own codes with a pre-arranged input. For the critical comparative review of the computer models, documentation has been made available on the following codes: AEROSIM (UK), MAEROS (USA), HAARM-3 (USA), AEROSOLS/A2 (France), AEROSOLS/B1 (France), and PARDISEKO-IIIb (FRG)

  9. KWIC Index of nuclear codes (1975 edition)

    International Nuclear Information System (INIS)

    Akanuma, Makoto; Hirakawa, Takashi

    1976-01-01

    It is a KWIC Index for 254 nuclear codes in the Nuclear Code Abstracts (1975 edition). The classification of nuclear codes and the form of index are the same as those in the Computer Programme Library at Ispra, Italy. (auth.)

  10. The metaethics of nursing codes of ethics and conduct.

    Science.gov (United States)

    Snelling, Paul C

    2016-10-01

    Nursing codes of ethics and conduct are features of professional practice across the world, and in the UK, the regulator has recently consulted on and published a new code. Initially part of a professionalising agenda, nursing codes have recently come to represent a managerialist and disciplinary agenda and nursing can no longer be regarded as a self-regulating profession. This paper argues that codes of ethics and codes of conduct are significantly different in form and function similar to the difference between ethics and law in everyday life. Some codes successfully integrate these two functions within the same document, while others, principally the UK Code, conflate them resulting in an ambiguous document unable to fulfil its functions effectively. The paper analyses the differences between ethical-codes and conduct-codes by discussing titles, authorship, level, scope for disagreement, consequences of transgression, language and finally and possibly most importantly agent-centeredness. It is argued that conduct-codes cannot require nurses to be compassionate because compassion involves an emotional response. The concept of kindness provides a plausible alternative for conduct-codes as it is possible to understand it solely in terms of acts. But if kindness is required in conduct-codes, investigation and possible censure follows from its absence. Using examples it is argued that there are at last five possible accounts of the absence of kindness. As well as being potentially problematic for disciplinary panels, difficulty in understanding the features of blameworthy absence of kindness may challenge UK nurses who, following a recently introduced revalidation procedure, are required to reflect on their practice in relation to The Code. It is concluded that closer attention to metaethical concerns by code writers will better support the functions of their issuing organisations. © 2016 John Wiley & Sons Ltd.

  11. Development of the DTNTES code

    International Nuclear Information System (INIS)

    Ortega Prieto, P.; Morales Dorado, M.D.; Alonso Santos, A.

    1987-01-01

    The DTNTES code has been developed in the Department of Nuclear Technology of the Polytechnical University in Madrid as a part of the Research Program on Quantitative Risk Analysis. DTNTES code calculates several time-dependent probabilistic characteristics of basic events, minimal cut sets and the top event of a fault tree. The code assumes that basic events are statistically independent, and they have failure and repair distributions. It computes the minimal cut upper bound approach for the top event unavailability, and the time-dependent unreliability of the top event by means of different methods, selected by the user. These methods are: expected number of system failures, failure rate, Barlow-Proschan bound, steady-state upper bound, and T* method. (author)

  12. Repetition code of 15 qubits

    Science.gov (United States)

    Wootton, James R.; Loss, Daniel

    2018-05-01

    The repetition code is an important primitive for the techniques of quantum error correction. Here we implement repetition codes of at most 15 qubits on the 16 qubit ibmqx3 device. Each experiment is run for a single round of syndrome measurements, achieved using the standard quantum technique of using ancilla qubits and controlled operations. The size of the final syndrome is small enough to allow for lookup table decoding using experimentally obtained data. The results show strong evidence that the logical error rate decays exponentially with code distance, as is expected and required for the development of fault-tolerant quantum computers. The results also give insight into the nature of noise in the device.

  13. Transmission from theory to practice: Experiences using open-source code development and a virtual short course to increase the adoption of new theoretical approaches

    Science.gov (United States)

    Harman, C. J.

    2015-12-01

    Even amongst the academic community, new theoretical tools can remain underutilized due to the investment of time and resources required to understand and implement them. This surely limits the frequency that new theory is rigorously tested against data by scientists outside the group that developed it, and limits the impact that new tools could have on the advancement of science. Reducing the barriers to adoption through online education and open-source code can bridge the gap between theory and data, forging new collaborations, and advancing science. A pilot venture aimed at increasing the adoption of a new theory of time-variable transit time distributions was begun in July 2015 as a collaboration between Johns Hopkins University and The Consortium of Universities for the Advancement of Hydrologic Science (CUAHSI). There were four main components to the venture: a public online seminar covering the theory, an open source code repository, a virtual short course designed to help participants apply the theory to their data, and an online forum to maintain discussion and build a community of users. 18 participants were selected for the non-public components based on their responses in an application, and were asked to fill out a course evaluation at the end of the short course, and again several months later. These evaluations, along with participation in the forum and on-going contact with the organizer suggest strengths and weaknesses in this combination of components to assist participants in adopting new tools.

  14. List Decoding of Algebraic Codes

    DEFF Research Database (Denmark)

    Nielsen, Johan Sebastian Rosenkilde

    We investigate three paradigms for polynomial-time decoding of Reed–Solomon codes beyond half the minimum distance: the Guruswami–Sudan algorithm, Power decoding and the Wu algorithm. The main results concern shaping the computational core of all three methods to a problem solvable by module...... Hermitian codes using Guruswami–Sudan or Power decoding faster than previously known, and we show how to Wu list decode binary Goppa codes....... to solve such using module minimisation, or using our new Demand–Driven algorithm which is also based on module minimisation. The decoding paradigms are all derived and analysed in a self-contained manner, often in new ways or examined in greater depth than previously. Among a number of new results, we...

  15. Computation of the Genetic Code

    Science.gov (United States)

    Kozlov, Nicolay N.; Kozlova, Olga N.

    2018-03-01

    One of the problems in the development of mathematical theory of the genetic code (summary is presented in [1], the detailed -to [2]) is the problem of the calculation of the genetic code. Similar problems in the world is unknown and could be delivered only in the 21st century. One approach to solving this problem is devoted to this work. For the first time provides a detailed description of the method of calculation of the genetic code, the idea of which was first published earlier [3]), and the choice of one of the most important sets for the calculation was based on an article [4]. Such a set of amino acid corresponds to a complete set of representations of the plurality of overlapping triple gene belonging to the same DNA strand. A separate issue was the initial point, triggering an iterative search process all codes submitted by the initial data. Mathematical analysis has shown that the said set contains some ambiguities, which have been founded because of our proposed compressed representation of the set. As a result, the developed method of calculation was limited to the two main stages of research, where the first stage only the of the area were used in the calculations. The proposed approach will significantly reduce the amount of computations at each step in this complex discrete structure.

  16. Static analysis: from theory to practice; Static analysis of large-scale embedded code, generation of abstract domains; Analyse statique: de la theorie a la pratique; analyse statique de code embarque de grande taille, generation de domaines abstraits

    Energy Technology Data Exchange (ETDEWEB)

    Monniaux, D.

    2009-06-15

    Software operating critical systems (aircraft, nuclear power plants) should not fail - whereas most computerised systems of daily life (personal computer, ticket vending machines, cell phone) fail from time to time. This is not a simple engineering problem: it is known, since the works of Turing and Cook, that proving that programs work correctly is intrinsically hard. In order to solve this problem, one needs methods that are, at the same time, efficient (moderate costs in time and memory), safe (all possible failures should be found), and precise (few warnings about nonexistent failures). In order to reach a satisfactory compromise between these goals, one can research fields as diverse as formal logic, numerical analysis or 'classical' algorithmics. From 2002 to 2007 I participated in the development of the Astree static analyser. This suggested to me a number of side projects, both theoretical and practical (use of formal proof techniques, analysis of numerical filters...). More recently, I became interested in modular analysis of numerical property and in the applications to program analysis of constraint solving techniques (semi-definite programming, SAT and SAT modulo theory). (author)

  17. A proposal for a code of ethics for nurse practitioners.

    Science.gov (United States)

    Peterson, Moya; Potter, Robert Lyman

    2004-03-01

    To review established codes for health care professionals and standards of practice for the nurse practitioner (NP) and to utilize these codes and standards, general ethical themes, and a new ethical triangle to propose an ethical code for NPs. Reviews of three generally accepted ethical themes (deontological, teleological, and areteological), the ethical triangle by Potter, the American Academy of Nurse Practitioners (AANP) standards of practice for NPs, and codes of ethics from the American Nurses Association (ANA) and the American Medical Association (AMA). A proposal for a code of ethics for NPs is presented. This code was determined by basic ethical themes and established codes for nursing, formulated by the ANA, and for physicians, formulated by the AMA. The proposal was also developed in consideration of the AANP standards of practice for NPs. The role of the NP is unique in its ethical demands. The authors believe that the expanded practice of NPs presents ethical concerns that are not addressed by the ANA code and yet are relevant to nursing and therefore different than the ethical concerns of physicians. This proposal attempts to broaden NPs' perspective of the role that ethics should hold in their professional lives.

  18. Overview of CSR codes

    International Nuclear Information System (INIS)

    Bassi, G.; Agoh, T.; Dohlus, M.; Giannessi, L.; Hajima, R.; Kabel, A.; Limberg, T.; Quattromini, M.

    2006-01-01

    Coherent synchrotron radiation (CSR) effects play an important role in accelerator physics. CSR effects can be negative (emittance growth in bunch compressors and microbunching instability) or positive (production of CSR in a controlled way). Moreover, CSR is of interest in other fields such as astrophysics. Only a few simple models have been solved analytically. This motivates the development of numerical procedures. In this review article we overview different numerical methods to study CSR effects

  19. Documentation of Source Code.

    Science.gov (United States)

    1988-05-12

    the "load IC" menu option. A prompt will appear in the typescript window requesting the name of the knowledge base to be loaded. Enter...highlighted and then a prompt will appear in the typescript window. The prompt will be requesting the name of the file containing the message to be read in...the file name, the system will begin reading in the message. The listified message is echoed back in the typescript window. After that, the screen

  20. Tri-Coding of Information.

    Science.gov (United States)

    Simpson, Timothy J.

    Paivio's Dual Coding Theory has received widespread recognition for its connection between visual and aural channels of internal information processing. The use of only two channels, however, cannot satisfactorily explain the effects witnessed every day. This paper presents a study suggesting the presence a third, kinesthetic channel, currently…

  1. Diagnostic Coding for Epilepsy.

    Science.gov (United States)

    Williams, Korwyn; Nuwer, Marc R; Buchhalter, Jeffrey R

    2016-02-01

    Accurate coding is an important function of neurologic practice. This contribution to Continuum is part of an ongoing series that presents helpful coding information along with examples related to the issue topic. Tips for diagnosis coding, Evaluation and Management coding, procedure coding, or a combination are presented, depending on which is most applicable to the subject area of the issue.

  2. CVSscan : Visualization of Code Evolution

    NARCIS (Netherlands)

    Voinea, Lucian; Telea, Alex; Wijk, Jarke J. van

    2005-01-01

    During the life cycle of a software system, the source code is changed many times. We study how developers can be enabled to get insight in these changes, in order to understand the status, history and structure better, as well as for instance the roles played by various contributors. We present

  3. [Reflection around the code of ethics for nurses].

    Science.gov (United States)

    Depoire, Nathalie

    2017-09-01

    The code of ethics for nurses highlights the values, principles and obligations which characterise our profession. It also emphasises the conditions required to enable nurses to perform their professional practice with the autonomy granted to them by the Public Health Code. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  4. The Role of Code-Switching in Bilingual Creativity

    Science.gov (United States)

    Kharkhurin, Anatoliy V.; Wei, Li

    2015-01-01

    This study further explores the theme of bilingual creativity with the present focus on code-switching. Specifically, it investigates whether code-switching practice has an impact on creativity. In line with the previous research, selective attention was proposed as a potential cognitive mechanism, which on the one hand would benefit from…

  5. Fundamentals of information theory and coding design

    CERN Document Server

    Togneri, Roberto

    2003-01-01

    In a clear, concise, and modular format, this book introduces the fundamental concepts and mathematics of information and coding theory. The authors emphasize how a code is designed and discuss the main properties and characteristics of different coding algorithms along with strategies for selecting the appropriate codes to meet specific requirements. They provide comprehensive coverage of source and channel coding, address arithmetic, BCH, and Reed-Solomon codes and explore some more advanced topics such as PPM compression and turbo codes. Worked examples and sets of basic and advanced exercises in each chapter reinforce the text's clear explanations of all concepts and methodologies.

  6. Development and validation of sodium fire codes

    International Nuclear Information System (INIS)

    Morii, Tadashi; Himeno Yoshiaki; Miyake, Osamu

    1989-01-01

    Development, verification, and validation of the spray fire code, SPRAY-3M, the pool fire codes, SOFIRE-M2 and SPM, the aerosol behavior code, ABC-INTG, and the simultaneous spray and pool fires code, ASSCOPS, are presented. In addition, the state-of-the-art of development of the multi-dimensional natural convection code, SOLFAS, for the analysis of heat-mass transfer during a fire, is presented. (author)

  7. A class of Sudan-decodable codes

    DEFF Research Database (Denmark)

    Nielsen, Rasmus Refslund

    2000-01-01

    In this article, Sudan's algorithm is modified into an efficient method to list-decode a class of codes which can be seen as a generalization of Reed-Solomon codes. The algorithm is specialized into a very efficient method for unique decoding. The code construction can be generalized based...... on algebraic-geometry codes and the decoding algorithms are generalized accordingly. Comparisons with Reed-Solomon and Hermitian codes are made....

  8. Autonomy, responsibility and the Italian Code of Deontology for Nurses.

    Science.gov (United States)

    Barazzetti, Gaia; Radaelli, Stefania; Sala, Roberta

    2007-01-01

    This article is a first assessment of the Italian Code of deontology for nurses (revised in 1999) on the basis of data collected from focus groups with nurses taking part in the Ethical Codes in Nursing (ECN) project. We illustrate the professional context in which the Code was introduced and explain why the 1999 revision was necessary in the light of changes affecting the Italian nursing profession. The most remarkable findings concern professional autonomy and responsibility, and how the Code is thought of as a set of guidelines for nursing practice. We discuss these issues, underlining that the 1999 Code represents a valuable instrument for ethical reflection and examination, a stimulus for putting the moral sense of the nursing profession into action, and that it represents a new era for professional nursing practice in Italy. The results of the analysis also deserve further qualitative study and future consideration.

  9. Development of TIME2 code

    International Nuclear Information System (INIS)

    1986-02-01

    The paper reviews the progress on the development of a computer model TIME2, for modelling the long term evolution of shallow burial site environments for low- and intermediate-level radioactive waste disposal. The subject is discussed under the five topic headings: 1) background studies, including geomorphology, climate, human-induced effects, and seismicity, 2) development of the TIME2 code, 3) verification and testing, 4) documentation, and, 5) role of TIME2 in radiological risk assessment. (U.K.)

  10. The development of code benchmarks

    International Nuclear Information System (INIS)

    Glass, R.E.

    1986-01-01

    Sandia National Laboratories has undertaken a code benchmarking effort to define a series of cask-like problems having both numerical solutions and experimental data. The development of the benchmarks includes: (1) model problem definition, (2) code intercomparison, and (3) experimental verification. The first two steps are complete and a series of experiments are planned. The experiments will examine the elastic/plastic behavior of cylinders for both the end and side impacts resulting from a nine meter drop. The cylinders will be made from stainless steel and aluminum to give a range of plastic deformations. This paper presents the results of analyses simulating the model's behavior using materials properties for stainless steel and aluminum

  11. Towers of generalized divisible quantum codes

    Science.gov (United States)

    Haah, Jeongwan

    2018-04-01

    A divisible binary classical code is one in which every code word has weight divisible by a fixed integer. If the divisor is 2ν for a positive integer ν , then one can construct a Calderbank-Shor-Steane (CSS) code, where X -stabilizer space is the divisible classical code, that admits a transversal gate in the ν th level of Clifford hierarchy. We consider a generalization of the divisibility by allowing a coefficient vector of odd integers with which every code word has zero dot product modulo the divisor. In this generalized sense, we construct a CSS code with divisor 2ν +1 and code distance d from any CSS code of code distance d and divisor 2ν where the transversal X is a nontrivial logical operator. The encoding rate of the new code is approximately d times smaller than that of the old code. In particular, for large d and ν ≥2 , our construction yields a CSS code of parameters [[O (dν -1) ,Ω (d ) ,d ] ] admitting a transversal gate at the ν th level of Clifford hierarchy. For our construction we introduce a conversion from magic state distillation protocols based on Clifford measurements to those based on codes with transversal T gates. Our tower contains, as a subclass, generalized triply even CSS codes that have appeared in so-called gauge fixing or code switching methods.

  12. The Classification of Complementary Information Set Codes of Lengths 14 and 16

    OpenAIRE

    Freibert, Finley

    2012-01-01

    In the paper "A new class of codes for Boolean masking of cryptographic computations," Carlet, Gaborit, Kim, and Sol\\'{e} defined a new class of rate one-half binary codes called \\emph{complementary information set} (or CIS) codes. The authors then classified all CIS codes of length less than or equal to 12. CIS codes have relations to classical Coding Theory as they are a generalization of self-dual codes. As stated in the paper, CIS codes also have important practical applications as they m...

  13. Development of a coupled code system based on system transient code, RETRAN, and 3-D neutronics code, MASTER

    International Nuclear Information System (INIS)

    Kim, K. D.; Jung, J. J.; Lee, S. W.; Cho, B. O.; Ji, S. K.; Kim, Y. H.; Seong, C. K.

    2002-01-01

    A coupled code system of RETRAN/MASTER has been developed for best-estimate simulations of interactions between reactor core neutron kinetics and plant thermal-hydraulics by incorporation of a 3-D reactor core kinetics analysis code, MASTER into system transient code, RETRAN. The soundness of the consolidated code system is confirmed by simulating the MSLB benchmark problem developed to verify the performance of a coupled kinetics and system transient codes by OECD/NEA

  14. Code of Ethics for Pharmacists – Pharmaceutical Chamber of Macedonia

    OpenAIRE

    Angelovska, Bistra

    2015-01-01

    Code of ethics represents the principles that form the fundamental basis of the roles and responsibilities of pharmacists in pharmaceutical practice. According to pharmacy practice, pharmacists are confirmed as healthcare professionals with unique knowledge, skills and responsibilities for safe and efficient medication therapy management in order to optimize therapeutic outcomes. The scope of pharmacy practice includes technical aspects of pharmaceutical services, the preparation of p...

  15. Practice Location Characteristics of Non-Traditional Dental Practices.

    Science.gov (United States)

    Solomon, Eric S; Jones, Daniel L

    2016-04-01

    Current and future dental school graduates are increasingly likely to choose a non-traditional dental practice-a group practice managed by a dental service organization or a corporate practice with employed dentists-for their initial practice experience. In addition, the growth of non-traditional practices, which are located primarily in major urban areas, could accelerate the movement of dentists to those areas and contribute to geographic disparities in the distribution of dental services. To help the profession understand the implications of these developments, the aim of this study was to compare the location characteristics of non-traditional practices and traditional dental practices. After identifying non-traditional practices across the United States, the authors located those practices and traditional dental practices geographically by zip code. Non-traditional dental practices were found to represent about 3.1% of all dental practices, but they had a greater impact on the marketplace with almost twice the average number of staff and annual revenue. Virtually all non-traditional dental practices were located in zip codes that also had a traditional dental practice. Zip codes with non-traditional practices had significant differences from zip codes with only a traditional dental practice: the populations in areas with non-traditional practices had higher income levels and higher education and were slightly younger and proportionally more Hispanic; those practices also had a much higher likelihood of being located in a major metropolitan area. Dental educators and leaders need to understand the impact of these trends in the practice environment in order to both prepare graduates for practice and make decisions about planning for the workforce of the future.

  16. Design of convolutional tornado code

    Science.gov (United States)

    Zhou, Hui; Yang, Yao; Gao, Hongmin; Tan, Lu

    2017-09-01

    As a linear block code, the traditional tornado (tTN) code is inefficient in burst-erasure environment and its multi-level structure may lead to high encoding/decoding complexity. This paper presents a convolutional tornado (cTN) code which is able to improve the burst-erasure protection capability by applying the convolution property to the tTN code, and reduce computational complexity by abrogating the multi-level structure. The simulation results show that cTN code can provide a better packet loss protection performance with lower computation complexity than tTN code.

  17. Utilizing Codes of Ethics in Health Professions Education

    Science.gov (United States)

    Dahnke, Michael D.

    2014-01-01

    Codes of ethics abound in health care, the aims and purposes of which are multiple and varied, from operating as a decision making tool to acting as a standard of practice that can be operational in a legal context to providing a sense of elevated seriousness and professionalism within a field of practice. There is some doubt and controversy,…

  18. Faith and Ethics, Covenant and Code: The 2015 Revision of the ANA Code of Ethics for Nurses with Interpretive Statements.

    Science.gov (United States)

    Fowler, Marsha D

    How does and should the American Nurses Association Code of Ethics for Nurses with Interpretive Statements, with foundations from the late 1800s, impact today's nursing practice? How can the Code help you? The earlier 2001 Code was revised and became effective January 2015. The nine provisions received modest revision, as did the corresponding interpretive statements. However, Provisions 8 and 9 and their interpretive statements received more substantial revision. This article explains the Code and summarizes the 2015 revisions, considering points of particular interest for nurses of faith.

  19. Iterative List Decoding of Concatenated Source-Channel Codes

    Directory of Open Access Journals (Sweden)

    Hedayat Ahmadreza

    2005-01-01

    Full Text Available Whenever variable-length entropy codes are used in the presence of a noisy channel, any channel errors will propagate and cause significant harm. Despite using channel codes, some residual errors always remain, whose effect will get magnified by error propagation. Mitigating this undesirable effect is of great practical interest. One approach is to use the residual redundancy of variable length codes for joint source-channel decoding. In this paper, we improve the performance of residual redundancy source-channel decoding via an iterative list decoder made possible by a nonbinary outer CRC code. We show that the list decoding of VLC's is beneficial for entropy codes that contain redundancy. Such codes are used in state-of-the-art video coders, for example. The proposed list decoder improves the overall performance significantly in AWGN and fully interleaved Rayleigh fading channels.

  20. List Decoding of Matrix-Product Codes from nested codes: an application to Quasi-Cyclic codes

    DEFF Research Database (Denmark)

    Hernando, Fernando; Høholdt, Tom; Ruano, Diego

    2012-01-01

    A list decoding algorithm for matrix-product codes is provided when $C_1,..., C_s$ are nested linear codes and $A$ is a non-singular by columns matrix. We estimate the probability of getting more than one codeword as output when the constituent codes are Reed-Solomon codes. We extend this list...... decoding algorithm for matrix-product codes with polynomial units, which are quasi-cyclic codes. Furthermore, it allows us to consider unique decoding for matrix-product codes with polynomial units....

  1. Statistical mechanics of low-density parity-check codes

    Energy Technology Data Exchange (ETDEWEB)

    Kabashima, Yoshiyuki [Department of Computational Intelligence and Systems Science, Tokyo Institute of Technology, Yokohama 2268502 (Japan); Saad, David [Neural Computing Research Group, Aston University, Birmingham B4 7ET (United Kingdom)

    2004-02-13

    We review recent theoretical progress on the statistical mechanics of error correcting codes, focusing on low-density parity-check (LDPC) codes in general, and on Gallager and MacKay-Neal codes in particular. By exploiting the relation between LDPC codes and Ising spin systems with multi-spin interactions, one can carry out a statistical mechanics based analysis that determines the practical and theoretical limitations of various code constructions, corresponding to dynamical and thermodynamical transitions, respectively, as well as the behaviour of error-exponents averaged over the corresponding code ensemble as a function of channel noise. We also contrast the results obtained using methods of statistical mechanics with those derived in the information theory literature, and show how these methods can be generalized to include other channel types and related communication problems. (topical review)

  2. Statistical mechanics of low-density parity-check codes

    International Nuclear Information System (INIS)

    Kabashima, Yoshiyuki; Saad, David

    2004-01-01

    We review recent theoretical progress on the statistical mechanics of error correcting codes, focusing on low-density parity-check (LDPC) codes in general, and on Gallager and MacKay-Neal codes in particular. By exploiting the relation between LDPC codes and Ising spin systems with multi-spin interactions, one can carry out a statistical mechanics based analysis that determines the practical and theoretical limitations of various code constructions, corresponding to dynamical and thermodynamical transitions, respectively, as well as the behaviour of error-exponents averaged over the corresponding code ensemble as a function of channel noise. We also contrast the results obtained using methods of statistical mechanics with those derived in the information theory literature, and show how these methods can be generalized to include other channel types and related communication problems. (topical review)

  3. Coding and transmission of subband coded images on the Internet

    Science.gov (United States)

    Wah, Benjamin W.; Su, Xiao

    2001-09-01

    Subband-coded images can be transmitted in the Internet using either the TCP or the UDP protocol. Delivery by TCP gives superior decoding quality but with very long delays when the network is unreliable, whereas delivery by UDP has negligible delays but with degraded quality when packets are lost. Although images are delivered currently over the Internet by TCP, we study in this paper the use of UDP to deliver multi-description reconstruction-based subband-coded images. First, in order to facilitate recovery from UDP packet losses, we propose a joint sender-receiver approach for designing optimized reconstruction-based subband transform (ORB-ST) in multi-description coding (MDC). Second, we carefully evaluate the delay-quality trade-offs between the TCP delivery of SDC images and the UDP and combined TCP/UDP delivery of MDC images. Experimental results show that our proposed ORB-ST performs well in real Internet tests, and UDP and combined TCP/UDP delivery of MDC images provide a range of attractive alternatives to TCP delivery.

  4. [Coding in general practice-Will the ICD-11 be a step forward?

    Science.gov (United States)

    Kühlein, Thomas; Virtanen, Martti; Claus, Christoph; Popert, Uwe; van Boven, Kees

    2018-07-01

    Primary care physicians in Germany don't benefit from coding diagnoses-they are coding for the needs of others. For coding, they mostly are using either the thesaurus of the German Institute of Medical Documentation and Information (DIMDI) or self-made cheat-sheets. Coding quality is low but seems to be sufficient for the main use case of the resulting data, which is the morbidity adjusted risk compensation scheme that distributes financial resources between the many German health insurance companies.Neither the International Classification of Diseases and Health Related Problems (ICD-10) nor the German thesaurus as an interface terminology are adequate for coding in primary care. The ICD-11 itself will not recognizably be a step forward from the perspective of primary care. At least the browser database format will be advantageous. An implementation into the 182 different electronic health records (EHR) on the German market would probably standardize the coding process and make code finding easier. This method of coding would still be more cumbersome than the current coding with self-made cheat-sheets.The first steps towards a useful official cheat-sheet for primary care have been taken, awaiting implementation and evaluation. The International Classification of Primary Care (ICPC-2) already provides an adequate classification standard for primary care that can also be used in combination with ICD-10. A new version of ICPC (ICPC-3) is under development. As the ICPC-2 has already been integrated into the foundation layer of ICD-11 it might easily become the future standard for coding in primary care. Improving communication between the different EHR would make taking over codes from other healthcare providers possible. Another opportunity to improve the coding quality might be creating use cases for the resulting data for the primary care physicians themselves.

  5. Impacts of Model Building Energy Codes

    Energy Technology Data Exchange (ETDEWEB)

    Athalye, Rahul A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sivaraman, Deepak [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elliott, Douglas B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Liu, Bing [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bartlett, Rosemarie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-10-31

    The U.S. Department of Energy (DOE) Building Energy Codes Program (BECP) periodically evaluates national and state-level impacts associated with energy codes in residential and commercial buildings. Pacific Northwest National Laboratory (PNNL), funded by DOE, conducted an assessment of the prospective impacts of national model building energy codes from 2010 through 2040. A previous PNNL study evaluated the impact of the Building Energy Codes Program; this study looked more broadly at overall code impacts. This report describes the methodology used for the assessment and presents the impacts in terms of energy savings, consumer cost savings, and reduced CO2 emissions at the state level and at aggregated levels. This analysis does not represent all potential savings from energy codes in the U.S. because it excludes several states which have codes which are fundamentally different from the national model energy codes or which do not have state-wide codes. Energy codes follow a three-phase cycle that starts with the development of a new model code, proceeds with the adoption of the new code by states and local jurisdictions, and finishes when buildings comply with the code. The development of new model code editions creates the potential for increased energy savings. After a new model code is adopted, potential savings are realized in the field when new buildings (or additions and alterations) are constructed to comply with the new code. Delayed adoption of a model code and incomplete compliance with the code’s requirements erode potential savings. The contributions of all three phases are crucial to the overall impact of codes, and are considered in this assessment.

  6. Main hearing according to the new Serbian Criminal Procedure Code: Survey in practice

    Directory of Open Access Journals (Sweden)

    Soković Snežana

    2017-01-01

    Full Text Available The main hearing is the central part of the criminal procedure. In Serbia, the reform of the national criminal procedure legislation has brought about numerous changes related to this stage of criminal proceedings. Numerous objections have been addressed to the almost entirely new legal text. In an attempt to examine the advantages and disadvantages of the new legislation and observe how the prescribed rules are applied in practice, the authors have conducted an empirical research by attending 205 main hearings which were conducted under the rules of the new Criminal Procedure Code. The research covers a huge number of related issues but, given the page limit, this paper will focus on individual issues observed in trial proceedings. The focal point of reference is the examination of witness, but the authors also consider a number of other issues: the examination of expert witness, the delay of the trial, and the use of a video-link as a novelty introduced owing to the technological achievements of the modern era. The article is organized into several parts. The authors first provide a theoretical background of the issue under consideration and, then, present and discuss the research results provided in tables. In the third part of the article, the authors draw specific conclusions about the current practice in trials proceedings.

  7. Probabilistic coding of quantum states

    International Nuclear Information System (INIS)

    Grudka, Andrzej; Wojcik, Antoni; Czechlewski, Mikolaj

    2006-01-01

    We discuss the properties of probabilistic coding of two qubits to one qutrit and generalize the scheme to higher dimensions. We show that the protocol preserves the entanglement between the qubits to be encoded and the environment and can also be applied to mixed states. We present a protocol that enables encoding of n qudits to one qudit of dimension smaller than the Hilbert space of the original system and then allows probabilistic but error-free decoding of any subset of k qudits. We give a formula for the probability of successful decoding

  8. Temporal Coding of Volumetric Imagery

    Science.gov (United States)

    Llull, Patrick Ryan

    'Image volumes' refer to realizations of images in other dimensions such as time, spectrum, and focus. Recent advances in scientific, medical, and consumer applications demand improvements in image volume capture. Though image volume acquisition continues to advance, it maintains the same sampling mechanisms that have been used for decades; every voxel must be scanned and is presumed independent of its neighbors. Under these conditions, improving performance comes at the cost of increased system complexity, data rates, and power consumption. This dissertation explores systems and methods capable of efficiently improving sensitivity and performance for image volume cameras, and specifically proposes several sampling strategies that utilize temporal coding to improve imaging system performance and enhance our awareness for a variety of dynamic applications. Video cameras and camcorders sample the video volume (x,y,t) at fixed intervals to gain understanding of the volume's temporal evolution. Conventionally, one must reduce the spatial resolution to increase the framerate of such cameras. Using temporal coding via physical translation of an optical element known as a coded aperture, the compressive temporal imaging (CACTI) camera emonstrates a method which which to embed the temporal dimension of the video volume into spatial (x,y) measurements, thereby greatly improving temporal resolution with minimal loss of spatial resolution. This technique, which is among a family of compressive sampling strategies developed at Duke University, temporally codes the exposure readout functions at the pixel level. Since video cameras nominally integrate the remaining image volume dimensions (e.g. spectrum and focus) at capture time, spectral (x,y,t,lambda) and focal (x,y,t,z) image volumes are traditionally captured via sequential changes to the spectral and focal state of the system, respectively. The CACTI camera's ability to embed video volumes into images leads to exploration

  9. A PC version of the Monte Carlo criticality code OMEGA

    International Nuclear Information System (INIS)

    Seifert, E.

    1996-05-01

    A description of the PC version of the Monte Carlo criticality code OMEGA is given. The report contains a general description of the code together with a detailed input description. Furthermore, some examples are given illustrating the generation of an input file. The main field of application is the calculation of the criticality of arrangements of fissionable material. Geometrically complicated arrangements that often appear inside and outside a reactor, e.g. in a fuel storage or transport container, can be considered essentially without geometrical approximations. For example, the real geometry of assemblies containing hexagonal or square lattice structures can be described in full detail. Moreover, the code can be used for special investigations in the field of reactor physics and neutron transport. Many years of practical experience and comparison with reference cases have shown that the code together with the built-in data libraries gives reliable results. OMEGA is completely independent on other widely used criticality codes (KENO, MCNP, etc.), concerning programming and the data base. It is a good practice to run difficult criticality safety problems by different independent codes in order to mutually verify the results. In this way, OMEGA can be used as a redundant code within the family of criticality codes. An advantage of OMEGA is the short calculation time: A typical criticality safety application takes only a few minutes on a Pentium PC. Therefore, the influence of parameter variations can simply be investigated by running many variants of a problem. (orig.)

  10. Fundamentals of the DIGES code

    Energy Technology Data Exchange (ETDEWEB)

    Simos, N.; Philippacopoulos, A.J.

    1994-08-01

    Recently the authors have completed the development of the DIGES code (Direct GEneration of Spectra) for the US Nuclear Regulatory Commission. This paper presents the fundamental theoretical aspects of the code. The basic modeling involves a representation of typical building-foundation configurations as multi degree-of-freedom dynamic which are subjected to dynamic inputs in the form of applied forces or pressure at the superstructure or in the form of ground motions. Both the deterministic as well as the probabilistic aspects of DIGES are described. Alternate ways of defining the seismic input for the estimation of in-structure spectra and their consequences in terms of realistically appraising the variability of the structural response is discussed in detaiL These include definitions of the seismic input by ground acceleration time histories, ground response spectra, Fourier amplitude spectra or power spectral densities. Conversions of one of these forms to another due to requirements imposed by certain analysis techniques have been shown to lead, in certain cases, in controversial results. Further considerations include the definition of the seismic input as the excitation which is directly applied at the foundation of a structure or as the ground motion of the site of interest at a given point. In the latter case issues related to the transferring of this motion to the foundation through convolution/deconvolution and generally through kinematic interaction approaches are considered.

  11. Ombuds’ corner: Code of Conduct and change of behaviour

    CERN Multimedia

    Vincent Vuillemin

    2012-01-01

    In this series, the Bulletin aims to explain the role of the Ombuds at CERN by presenting practical examples of misunderstandings that could have been resolved by the Ombuds if he had been contacted earlier. Please note that, in all the situations we present, the names are fictitious and used only to improve clarity.   Is our Code of Conduct actually effective in influencing behaviour? Research studies suggest that codes, while necessary, are insufficient as a means of encouraging respectful behaviour among employees. Codes are only a potential means of influencing employee behaviour. For a Code of Conduct to be effective, several elements must be in place. Firstly, there needs to be communication and effective training using relevant examples to make the code real. It should be embraced by the leaders and accepted by the personnel. Finally, it should be embedded in the CERN culture and not seen as a separate entity, which requires serious discussions to raise awareness. In addition, every c...

  12. On the Combination of Multi-Layer Source Coding and Network Coding for Wireless Networks

    DEFF Research Database (Denmark)

    Krigslund, Jeppe; Fitzek, Frank; Pedersen, Morten Videbæk

    2013-01-01

    quality is developed. A linear coding structure designed to gracefully encapsulate layered source coding provides both low complexity of the utilised linear coding while enabling robust erasure correction in the form of fountain coding capabilities. The proposed linear coding structure advocates efficient...

  13. Some Families of Asymmetric Quantum MDS Codes Constructed from Constacyclic Codes

    Science.gov (United States)

    Huang, Yuanyuan; Chen, Jianzhang; Feng, Chunhui; Chen, Riqing

    2018-02-01

    Quantum maximal-distance-separable (MDS) codes that satisfy quantum Singleton bound with different lengths have been constructed by some researchers. In this paper, seven families of asymmetric quantum MDS codes are constructed by using constacyclic codes. We weaken the case of Hermitian-dual containing codes that can be applied to construct asymmetric quantum MDS codes with parameters [[n,k,dz/dx

  14. Codes of Ethics and Teachers' Professional Autonomy

    Science.gov (United States)

    Schwimmer, Marina; Maxwell, Bruce

    2017-01-01

    This article considers the value of adopting a code of professional ethics for teachers. After having underlined how a code of ethics stands to benefits a community of educators--namely, by providing a mechanism for regulating autonomy and promoting a shared professional ethic--the article examines the principal arguments against codes of ethics.…

  15. Development of computer code in PNC, 3

    International Nuclear Information System (INIS)

    Ohtaki, Akira; Ohira, Hiroaki

    1990-01-01

    Super-COPD, a code which is integrated by calculation modules, has been developed in order to evaluate kinds of dynamics of LMFBR plant by improving COPD. The code involves all models and its advanced models of COPD in module structures. The code makes it possible to simulate the system dynamics of LMFBR plant of any configurations and components. (author)

  16. Qualification of the AUTOBUS Mod. 2 Code

    International Nuclear Information System (INIS)

    Ciarniello, U.; Peroni, P.

    1988-01-01

    The paper presents the qualification of AUTOBUS MOD.2 code. After a brief description of the code itself, all the critical experiments simulated by the code are illustrated to prove the accuracy of criticality calculation and power distribution. An interpretation of the results and a conclusion close this presentation

  17. Evolutionary implications of genetic code deviations

    International Nuclear Information System (INIS)

    Chela Flores, J.

    1986-07-01

    By extending the standard genetic code into a temperature dependent regime, we propose a train of molecular events leading to alternative coding. The first few examples of these deviations have already been reported in some ciliated protozoans and Gram positive bacteria. A possible range of further alternative coding, still within the context of universality, is pointed out. (author)

  18. The general theory of convolutional codes

    Science.gov (United States)

    Mceliece, R. J.; Stanley, R. P.

    1993-01-01

    This article presents a self-contained introduction to the algebraic theory of convolutional codes. This introduction is partly a tutorial, but at the same time contains a number of new results which will prove useful for designers of advanced telecommunication systems. Among the new concepts introduced here are the Hilbert series for a convolutional code and the class of compact codes.

  19. Status of SPACE Safety Analysis Code Development

    International Nuclear Information System (INIS)

    Lee, Dong Hyuk; Yang, Chang Keun; Kim, Se Yun; Ha, Sang Jun

    2009-01-01

    In 2006, the Korean the Korean nuclear industry started developing a thermal-hydraulic analysis code for safety analysis of PWR(Pressurized Water Reactor). The new code is named as SPACE(Safety and Performance Analysis Code for Nuclear Power Plant). The SPACE code can solve two-fluid, three-field governing equations in one dimensional or three dimensional geometry. The SPACE code has many component models required for modeling a PWR, such as reactor coolant pump, safety injection tank, etc. The programming language used in the new code is C++, for new generation of engineers who are more comfortable with C/C++ than old FORTRAN language. This paper describes general characteristics of SPACE code and current status of SPACE code development

  20. Content layer progressive coding of digital maps

    DEFF Research Database (Denmark)

    Forchhammer, Søren; Jensen, Ole Riis

    2000-01-01

    A new lossless context based method is presented for content progressive coding of limited bits/pixel images, such as maps, company logos, etc., common on the WWW. Progressive encoding is achieved by separating the image into content layers based on other predefined information. Information from...... already coded layers are used when coding subsequent layers. This approach is combined with efficient template based context bi-level coding, context collapsing methods for multi-level images and arithmetic coding. Relative pixel patterns are used to collapse contexts. The number of contexts are analyzed....... The new methods outperform existing coding schemes coding digital maps and in addition provide progressive coding. Compared to the state-of-the-art PWC coder, the compressed size is reduced to 60-70% on our layered test images....

  1. Expansion of the CHR bone code system

    International Nuclear Information System (INIS)

    Farnham, J.E.; Schlenker, R.A.

    1976-01-01

    This report describes the coding system used in the Center for Human Radiobiology (CHR) to identify individual bones and portions of bones of a complete skeletal system. It includes illustrations of various bones and bone segments with their respective code numbers. Codes are also presented for bone groups and for nonbone materials

  2. Implementation of the SAMPO computer code in the Cyber 170-750

    International Nuclear Information System (INIS)

    Chagas, E.F.; Liguori Neto, R.; Gomes, P.R.S.

    1985-01-01

    The code SAMPO, in this available version, incorporates algorithms that determine energy, eficiency and peak shape. The code also includes processing subroutines that provide automatic surveys of peaks raising all their characteristics. The handling of the code has been improved and its analysing capacity in each region of the spectrum has been amplified. Practical information regarding the use of the code is enclosed. Tests made guarantee the good performance of the code SAMPO in the Cyber system-IEAv. (Author) [pt

  3. Iterative optimization of quantum error correcting codes

    International Nuclear Information System (INIS)

    Reimpell, M.; Werner, R.F.

    2005-01-01

    We introduce a convergent iterative algorithm for finding the optimal coding and decoding operations for an arbitrary noisy quantum channel. This algorithm does not require any error syndrome to be corrected completely, and hence also finds codes outside the usual Knill-Laflamme definition of error correcting codes. The iteration is shown to improve the figure of merit 'channel fidelity' in every step

  4. Analytical considerations in the code qualification of piping systems

    International Nuclear Information System (INIS)

    Antaki, G.A.

    1995-01-01

    The paper addresses several analytical topics in the design and qualification of piping systems which have a direct bearing on the prediction of stresses in the pipe and hence on the application of the equations of NB, NC and ND-3600 of the ASME Boiler and Pressure Vessel Code. For each of the analytical topics, the paper summarizes the current code requirements, if any, and the industry practice

  5. Code of ethics: principles for ethical leadership.

    Science.gov (United States)

    Flite, Cathy A; Harman, Laurinda B

    2013-01-01

    The code of ethics for a professional association incorporates values, principles, and professional standards. A review and comparative analysis of a 1934 pledge and codes of ethics from 1957, 1977, 1988, 1998, 2004, and 2011 for a health information management association was conducted. Highlights of some changes in the healthcare delivery system are identified as a general context for the codes of ethics. The codes of ethics are examined in terms of professional values and changes in the language used to express the principles of the various codes.

  6. Overview of hypersonic CFD code calibration studies

    Science.gov (United States)

    Miller, Charles G.

    1987-01-01

    The topics are presented in viewgraph form and include the following: definitions of computational fluid dynamics (CFD) code validation; climate in hypersonics and LaRC when first 'designed' CFD code calibration studied was initiated; methodology from the experimentalist's perspective; hypersonic facilities; measurement techniques; and CFD code calibration studies.

  7. MORSE - E. A new version of the MORSE code

    International Nuclear Information System (INIS)

    Ponti, C.; Heusden, R. van.

    1974-12-01

    This report describes a version of the MORSE code which has been written to facilitate the practical use of this programme. MORSE-E is a ready-to-use version that does not require particular programming efforts to adapt the code to the problem to be solved. It treats source volumes of different geometrical shapes. MORSE-E calculates the flux of particles as the sum of the paths travelled within a given volume; the corresponding relative errors are also provided

  8. ClinicalCodes: an online clinical codes repository to improve the validity and reproducibility of research using electronic medical records.

    Science.gov (United States)

    Springate, David A; Kontopantelis, Evangelos; Ashcroft, Darren M; Olier, Ivan; Parisi, Rosa; Chamapiwa, Edmore; Reeves, David

    2014-01-01

    Lists of clinical codes are the foundation for research undertaken using electronic medical records (EMRs). If clinical code lists are not available, reviewers are unable to determine the validity of research, full study replication is impossible, researchers are unable to make effective comparisons between studies, and the construction of new code lists is subject to much duplication of effort. Despite this, the publication of clinical codes is rarely if ever a requirement for obtaining grants, validating protocols, or publishing research. In a representative sample of 450 EMR primary research articles indexed on PubMed, we found that only 19 (5.1%) were accompanied by a full set of published clinical codes and 32 (8.6%) stated that code lists were available on request. To help address these problems, we have built an online repository where researchers using EMRs can upload and download lists of clinical codes. The repository will enable clinical researchers to better validate EMR studies, build on previous code lists and compare disease definitions across studies. It will also assist health informaticians in replicating database studies, tracking changes in disease definitions or clinical coding practice through time and sharing clinical code information across platforms and data sources as research objects.

  9. Polynomial theory of error correcting codes

    CERN Document Server

    Cancellieri, Giovanni

    2015-01-01

    The book offers an original view on channel coding, based on a unitary approach to block and convolutional codes for error correction. It presents both new concepts and new families of codes. For example, lengthened and modified lengthened cyclic codes are introduced as a bridge towards time-invariant convolutional codes and their extension to time-varying versions. The novel families of codes include turbo codes and low-density parity check (LDPC) codes, the features of which are justified from the structural properties of the component codes. Design procedures for regular LDPC codes are proposed, supported by the presented theory. Quasi-cyclic LDPC codes, in block or convolutional form, represent one of the most original contributions of the book. The use of more than 100 examples allows the reader gradually to gain an understanding of the theory, and the provision of a list of more than 150 definitions, indexed at the end of the book, permits rapid location of sought information.

  10. ... An example of flawed code

    CERN Multimedia

    Computer Security Team

    2011-01-01

    Do you recall our small exercise in the last issue of the Bulletin?   We were wondering how well written the following code was:     1 /* Safely Exec program: drop privileges to user uid and group 2 * gid, and use chroot to restrict file system access to jail 3 * directory. Also, don’t allow program to run as a 4 * privileged user or group */ 5 void ExecUid(int uid, int gid, char *jailDir, char *prog, char *const argv[]) 6 { 7 if (uid == 0 || gid == 0) { 8 FailExit(“ExecUid: root uid or gid not allowed”); 9 } 10 11 chroot(jailDir); /* restrict access to this dir */ 12 13 setuid(uid); /* drop privs */ 14 setgid(gid); 15 16 fprintf(LOGFILE, “Execvp of %s as uid=%d gid=%d\

  11. Corporate Governance Scorecards : Assessing and Promoting the Implementation of Codes of Corporate Governance

    OpenAIRE

    International Finance Corporation

    2014-01-01

    This is a supplement to second IFC's toolkit: developing Corporate Governance codes of best practice. The focus of second toolkit is the development of codes of corporate governance. This supplement focuses narrowly on how to use scorecards to measure the observance and implementation of such codes. It does not cover the full panoply of governance assessment tools. This supplement provides...

  12. Content Layer progressive Coding of Digital Maps

    DEFF Research Database (Denmark)

    Forchhammer, Søren; Jensen, Ole Riis

    2002-01-01

    A new lossless context based method is presented for content progressive coding of limited bits/pixel images, such as maps, company logos, etc., common on the World Wide Web. Progressive encoding is achieved by encoding the image in content layers based on color level or other predefined...... information. Information from already coded layers are used when coding subsequent layers. This approach is combined with efficient template based context bilevel coding, context collapsing methods for multilevel images and arithmetic coding. Relative pixel patterns are used to collapse contexts. Expressions...... for calculating the resulting number of contexts are given. The new methods outperform existing schemes coding digital maps and in addition provide progressive coding. Compared to the state-of-the-art PWC coder, the compressed size is reduced to 50-70% on our layered map test images....

  13. International Accreditation of ASME Codes and Standards

    International Nuclear Information System (INIS)

    Green, Mervin R.

    1989-01-01

    ASME established a Boiler Code Committee to develop rules for the design, fabrication and inspection of boilers. This year we recognize 75 years of that Code and will publish a history of that 75 years. The first Code and subsequent editions provided for a Code Symbol Stamp or mark which could be affixed by a manufacturer to a newly constructed product to certify that the manufacturer had designed, fabricated and had inspected it in accordance with Code requirements. The purpose of the ASME Mark is to identify those boilers that meet ASME Boiler and Pressure Vessel Code requirements. Through thousands of updates over the years, the Code has been revised to reflect technological advances and changing safety needs. Its scope has been broadened from boilers to include pressure vessels, nuclear components and systems. Proposed revisions to the Code are published for public review and comment four times per year and revisions and interpretations are published annually; it's a living and constantly evolving Code. You and your organizations are a vital part of the feedback system that keeps the Code alive. Because of this dynamic Code, we no longer have columns in newspapers listing boiler explosions. Nevertheless, it has been argued recently that ASME should go further in internationalizing its Code. Specifically, representatives of several countries, have suggested that ASME delegate to them responsibility for Code implementation within their national boundaries. The question is, thus, posed: Has the time come to franchise responsibility for administration of ASME's Code accreditation programs to foreign entities or, perhaps, 'institutes.' And if so, how should this be accomplished?

  14. Challenge: Code of environmental law; Herausforderung Umweltgesetzbuch

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-15

    Within the meeting ''Challenge: Code of environmental law'' at 16th February, 2007, in Berlin (Federal Republic of Germany) and organized by the Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (Berlin, Federal Republic of Germany), the following lectures were held: (a) the new code of environmental law as a contribution to more modernness and efficiency in the environmental politics (Sigmar Gabriel); (b) The code of environmental law from the view of the economy (Martin Wansleben); (c) Significance of the code of environmental law from the view of jurisprudence (Michael Kloepfer); (d) Targets, content and utility of the code of environmental law: Summary of the panel discussion (Tanja Goenner, Klaus Mittelbach, Juergen Resch, Hans-Joachim Koch, Alfred Wirtz, Andreas Troge (moderator)); (e) Considerations to the coding of water law in the code of environmental law (Helge Wendenburg); (f) Considerations to the coding of water law: Summary of te discussion; (g) Considerations to the coding of nature conservation law (Jochen Flasbarth); (h) Considerations to the coding of nature conservation law: Summary of the discussion.

  15. Evaluation of Code Blue Implementation Outcomes

    Directory of Open Access Journals (Sweden)

    Bengü Özütürk

    2015-09-01

    Full Text Available Aim: In this study, we aimed to emphasize the importance of Code Blue implementation and to determine deficiencies in this regard. Methods: After obtaining the ethics committee approval, 225 patient’s code blue call data between 2012 and 2014 January were retrospectively analyzed. Age and gender of the patients, date and time of the call and the clinics giving Code Blue, the time needed for the Code Blue team to arrive, the rates of false Code Blue calls, reasons for Code Blue calls and patient outcomes were investigated. Results: A total of 225 patients (149 male, 76 female were evaluated in the study. The mean age of the patients was 54.1 years. 142 (67.2% Code Blue calls occurred after hours and by emergency unit. The mean time for the Code Blue team to arrive was 1.10 minutes. Spontaneous circulation was provided in 137 patients (60.8%; 88 (39.1% died. The most commonly identified possible causes were of cardiac origin. Conclusion: This study showed that Code Blue implementation with a professional team within an efficient and targeted time increase the survival rate. Therefore, we conclude that the application of Code Blue carried out by a trained team is an essential standard in hospitals. (The Medical Bulletin of Haseki 2015; 53:204-8

  16. Code of practice for the temporary diversion of water from hydrostatic testing of pipelines: Water Act - Water (Ministerial) Regulation No. 205

    International Nuclear Information System (INIS)

    1999-01-01

    A series of administrative procedures are described in this regulation regarding the temporary diversion of water for hydrostatic testing of pipelines in Alberta. These include the notification and timing of the release of water, where the test will occur and the possible effect of water release on the environment. The requirements of a hydrostatic test plan are described in point form. In accordance with the regulation, a person responsible for the testing must ensure that the testing does not cause a significant adverse effect on the aquatic environment or on any household user. Should this occur, all adverse effects on the aquatic environment should be fully mitigated. The reporting schedule and record keeping information are also covered. 2 tabs., 1 figs

  17. Survey of nuclear fuel-cycle codes

    International Nuclear Information System (INIS)

    Thomas, C.R.; de Saussure, G.; Marable, J.H.

    1981-04-01

    A two-month survey of nuclear fuel-cycle models was undertaken. This report presents the information forthcoming from the survey. Of the nearly thirty codes reviewed in the survey, fifteen of these codes have been identified as potentially useful in fulfilling the tasks of the Nuclear Energy Analysis Division (NEAD) as defined in their FY 1981-1982 Program Plan. Six of the fifteen codes are given individual reviews. The individual reviews address such items as the funding agency, the author and organization, the date of completion of the code, adequacy of documentation, computer requirements, history of use, variables that are input and forecast, type of reactors considered, part of fuel cycle modeled and scope of the code (international or domestic, long-term or short-term, regional or national). The report recommends that the Model Evaluation Team perform an evaluation of the EUREKA uranium mining and milling code

  18. Safe use of mine winding ropes, volume 6: studies towards a code of practice for the performance, operation, testing and maintenance of drub winders.

    CSIR Research Space (South Africa)

    Hecker, GFK

    1996-04-01

    Full Text Available This research study attempts to determine the maximum rope force in the rope of a mine winding system subsequent to a break control system failure. Four different winder ropes were evaluated: a 4000m Blair multi system; a 2300m Blair multi system; a...

  19. Cracking the code of change.

    Science.gov (United States)

    Beer, M; Nohria, N

    2000-01-01

    Today's fast-paced economy demands that businesses change or die. But few companies manage corporate transformations as well as they would like. The brutal fact is that about 70% of all change initiatives fail. In this article, authors Michael Beer and Nitin Nohria describe two archetypes--or theories--of corporate transformation that may help executives crack the code of change. Theory E is change based on economic value: shareholder value is the only legitimate measure of success, and change often involves heavy use of economic incentives, layoffs, downsizing, and restructuring. Theory O is change based on organizational capability: the goal is to build and strengthen corporate culture. Most companies focus purely on one theory or the other, or haphazardly use a mix of both, the authors say. Combining E and O is directionally correct, they contend, but it requires a careful, conscious integration plan. Beer and Nohria present the examples of two companies, Scott Paper and Champion International, that used a purely E or purely O strategy to create change--and met with limited levels of success. They contrast those corporate transformations with that of UK-based retailer ASDA, which has successfully embraced the paradox between the opposing theories of change and integrated E and O. The lesson from ASDA? To thrive and adapt in the new economy, companies must make sure the E and O theories of business change are in sync at their own organizations.

  20. Performance Analysis of CRC Codes for Systematic and Nonsystematic Polar Codes with List Decoding

    Directory of Open Access Journals (Sweden)

    Takumi Murata

    2018-01-01

    Full Text Available Successive cancellation list (SCL decoding of polar codes is an effective approach that can significantly outperform the original successive cancellation (SC decoding, provided that proper cyclic redundancy-check (CRC codes are employed at the stage of candidate selection. Previous studies on CRC-assisted polar codes mostly focus on improvement of the decoding algorithms as well as their implementation, and little attention has been paid to the CRC code structure itself. For the CRC-concatenated polar codes with CRC code as their outer code, the use of longer CRC code leads to reduction of information rate, whereas the use of shorter CRC code may reduce the error detection probability, thus degrading the frame error rate (FER performance. Therefore, CRC codes of proper length should be employed in order to optimize the FER performance for a given signal-to-noise ratio (SNR per information bit. In this paper, we investigate the effect of CRC codes on the FER performance of polar codes with list decoding in terms of the CRC code length as well as its generator polynomials. Both the original nonsystematic and systematic polar codes are considered, and we also demonstrate that different behaviors of CRC codes should be observed depending on whether the inner polar code is systematic or not.

  1. Validations and applications of the FEAST code

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Z.; Tayal, M.; Lau, J.H.; Evinou, D. [Atomic Energy of Canada Limited, Mississauga, Ontario (Canada); Jun, J.S. [Korea Atomic Energy Research Inst. (Korea, Republic of)

    1999-07-01

    The FEAST (Finite Element Analysis for STresses) code is part of a suite of computer codes that are used to assess the structural integrity of CANDu fuel elements and bundles. A detailed validation of the FEAST code was recently performed. The FEAST calculations are in good agreement with a variety of analytical solutions (18 cases) for stresses, strains and displacements. This consistency shows that the FEAST code correctly incorporates the fundamentals of stress analysis. Further, the calculations of the FEAST code match the variations in axial and hoop strain profiles, measured by strain gauges near the sheath-endcap weld during an out-reactor compression test. The code calculations are also consistent with photoelastic measurements in simulated endcaps. (author)

  2. Validations and applications of the FEAST code

    International Nuclear Information System (INIS)

    Xu, Z.; Tayal, M.; Lau, J.H.; Evinou, D.; Jun, J.S.

    1999-01-01

    The FEAST (Finite Element Analysis for STresses) code is part of a suite of computer codes that are used to assess the structural integrity of CANDu fuel elements and bundles. A detailed validation of the FEAST code was recently performed. The FEAST calculations are in good agreement with a variety of analytical solutions (18 cases) for stresses, strains and displacements. This consistency shows that the FEAST code correctly incorporates the fundamentals of stress analysis. Further, the calculations of the FEAST code match the variations in axial and hoop strain profiles, measured by strain gauges near the sheath-endcap weld during an out-reactor compression test. The code calculations are also consistent with photoelastic measurements in simulated endcaps. (author)

  3. New quantum codes derived from a family of antiprimitive BCH codes

    Science.gov (United States)

    Liu, Yang; Li, Ruihu; Lü, Liangdong; Guo, Luobin

    The Bose-Chaudhuri-Hocquenghem (BCH) codes have been studied for more than 57 years and have found wide application in classical communication system and quantum information theory. In this paper, we study the construction of quantum codes from a family of q2-ary BCH codes with length n=q2m+1 (also called antiprimitive BCH codes in the literature), where q≥4 is a power of 2 and m≥2. By a detailed analysis of some useful properties about q2-ary cyclotomic cosets modulo n, Hermitian dual-containing conditions for a family of non-narrow-sense antiprimitive BCH codes are presented, which are similar to those of q2-ary primitive BCH codes. Consequently, via Hermitian Construction, a family of new quantum codes can be derived from these dual-containing BCH codes. Some of these new antiprimitive quantum BCH codes are comparable with those derived from primitive BCH codes.

  4. Critical Care Coding for Neurologists.

    Science.gov (United States)

    Nuwer, Marc R; Vespa, Paul M

    2015-10-01

    Accurate coding is an important function of neurologic practice. This contribution to Continuum is part of an ongoing series that presents helpful coding information along with examples related to the issue topic. Tips for diagnosis coding, Evaluation and Management coding, procedure coding, or a combination are presented, depending on which is most applicable to the subject area of the issue.

  5. Case Study of the NENE Code Project

    National Research Council Canada - National Science Library

    Kendall, Richard; Post, Douglass; Mark, Andrew

    2007-01-01

    ...) Program is sponsoring a series of case studies to identify the life cycles, workflows, and technical challenges of computational science and engineering code development that are representative...

  6. A method for modeling co-occurrence propensity of clinical codes with application to ICD-10-PCS auto-coding.

    Science.gov (United States)

    Subotin, Michael; Davis, Anthony R

    2016-09-01

    Natural language processing methods for medical auto-coding, or automatic generation of medical billing codes from electronic health records, generally assign each code independently of the others. They may thus assign codes for closely related procedures or diagnoses to the same document, even when they do not tend to occur together in practice, simply because the right choice can be difficult to infer from the clinical narrative. We propose a method that injects awareness of the propensities for code co-occurrence into this process. First, a model is trained to estimate the conditional probability that one code is assigned by a human coder, given than another code is known to have been assigned to the same document. Then, at runtime, an iterative algorithm is used to apply this model to the output of an existing statistical auto-coder to modify the confidence scores of the codes. We tested this method in combination with a primary auto-coder for International Statistical Classification of Diseases-10 procedure codes, achieving a 12% relative improvement in F-score over the primary auto-coder baseline. The proposed method can be used, with appropriate features, in combination with any auto-coder that generates codes with different levels of confidence. The promising results obtained for International Statistical Classification of Diseases-10 procedure codes suggest that the proposed method may have wider applications in auto-coding. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  7. On the Performance of a Multi-Edge Type LDPC Code for Coded Modulation

    NARCIS (Netherlands)

    Cronie, H.S.

    2005-01-01

    We present a method to combine error-correction coding and spectral-efficient modulation for transmission over the Additive White Gaussian Noise (AWGN) channel. The code employs signal shaping which can provide a so-called shaping gain. The code belongs to the family of sparse graph codes for which

  8. Balanced distributed coding of omnidirectional images

    Science.gov (United States)

    Thirumalai, Vijayaraghavan; Tosic, Ivana; Frossard, Pascal

    2008-01-01

    This paper presents a distributed coding scheme for the representation of 3D scenes captured by stereo omni-directional cameras. We consider a scenario where images captured from two different viewpoints are encoded independently, with a balanced rate distribution among the different cameras. The distributed coding is built on multiresolution representation and partitioning of the visual information in each camera. The encoder transmits one partition after entropy coding, as well as the syndrome bits resulting from the channel encoding of the other partition. The decoder exploits the intra-view correlation and attempts to reconstruct the source image by combination of the entropy-coded partition and the syndrome information. At the same time, it exploits the inter-view correlation using motion estimation between images from different cameras. Experiments demonstrate that the distributed coding solution performs better than a scheme where images are handled independently, and that the coding rate stays balanced between encoders.

  9. Parallel processing of structural integrity analysis codes

    International Nuclear Information System (INIS)

    Swami Prasad, P.; Dutta, B.K.; Kushwaha, H.S.

    1996-01-01

    Structural integrity analysis forms an important role in assessing and demonstrating the safety of nuclear reactor components. This analysis is performed using analytical tools such as Finite Element Method (FEM) with the help of digital computers. The complexity of the problems involved in nuclear engineering demands high speed computation facilities to obtain solutions in reasonable amount of time. Parallel processing systems such as ANUPAM provide an efficient platform for realising the high speed computation. The development and implementation of software on parallel processing systems is an interesting and challenging task. The data and algorithm structure of the codes plays an important role in exploiting the parallel processing system capabilities. Structural analysis codes based on FEM can be divided into two categories with respect to their implementation on parallel processing systems. The first category codes such as those used for harmonic analysis, mechanistic fuel performance codes need not require the parallelisation of individual modules of the codes. The second category of codes such as conventional FEM codes require parallelisation of individual modules. In this category, parallelisation of equation solution module poses major difficulties. Different solution schemes such as domain decomposition method (DDM), parallel active column solver and substructuring method are currently used on parallel processing systems. Two codes, FAIR and TABS belonging to each of these categories have been implemented on ANUPAM. The implementation details of these codes and the performance of different equation solvers are highlighted. (author). 5 refs., 12 figs., 1 tab

  10. Deontological aspects of the nursing profession: understanding the code of ethics.

    Science.gov (United States)

    Silva, Terezinha Nunes da; Freire, Maria Eliane Moreira; Vasconcelos, Monica Ferreira de; Silva Junior, Sergio Vital da; Silva, Wilton José de Carvalho; Araújo, Patrícia da Silva; Eloy, Allan Victor Assis

    2018-01-01

    to investigate nursing professionals' understanding concerning the Code of Ethics; to assess the relevance of the Code of Ethics of the nursing profession and its use in practice; to identify how problem-solving is performed when facing ethical dilemmas in professional practice. exploratory descriptive study, conducted with 34 (thirty-four) nursing professionals from a teaching hospital in João Pessoa, PB - Brazil. four thematic categories emerged: conception of professional ethics in nursing practice; interpretations of ethics in the practice of care; use of the Code of Ethics in the professional practice; strategies for solving ethical issues in the professional practice. some of the nursing professionals comprehend the meaning coherently; others have a limited comprehension, based on jargon. Therefore, a deeper understanding of the text contained in this code is necessary so that it can be applied into practice, aiming to provide a quality care that is, above all, ethical and legal.

  11. Some optimizations of the animal code

    International Nuclear Information System (INIS)

    Fletcher, W.T.

    1975-01-01

    Optimizing techniques were performed on a version of the ANIMAL code (MALAD1B) at the source-code (FORTRAN) level. Sample optimizing techniques and operations used in MALADOP--the optimized version of the code--are presented, along with a critique of some standard CDC 7600 optimizing techniques. The statistical analysis of total CPU time required for MALADOP and MALAD1B shows a run-time saving of 174 msec (almost 3 percent) in the code MALADOP during one time step

  12. A Pragmatic Approach to the Application of the Code of Ethics in Nursing Education.

    Science.gov (United States)

    Tinnon, Elizabeth; Masters, Kathleen; Butts, Janie

    The code of ethics for nurses was written for nurses in all settings. However, the language focuses primarily on the nurse in context of the patient relationship, which may make it difficult for nurse educators to internalize the code to inform practice. The purpose of this article is to explore the code of ethics, establish that it can be used to guide nurse educators' practice, and provide a pragmatic approach to application of the provisions.

  13. Influence of the Good-Practice Principles and Codes in the Corporate Governance upon the Quality of the Financial-Accounting Information

    Directory of Open Access Journals (Sweden)

    Mirela Niculae

    2017-06-01

    Full Text Available This hereby works tries to identify the principles regarding the corporate governance and analyze the way in which such corporate governance templates influence the qualitative characteristics of the financial information. The execution of the governance means the obligation to implement the processes and structures corresponding to the management and the administration of the business and company’s operations, to provide their good operation. The final scope of the good corporate governance is to provide the efficiency, credibility and reliability of the organization. Solid governance means the settlement of certain fundamental principles defining the relationships between different actors clearly tracks the responsibilities and provides a correct operation of the decision making processes. Starting from the statement according to which the transparency and the quality of the corporate governance system are two concepts coexisting and relating intensively, associations among the characteristics of the shareholding and the information transparency level can be identified in the activity of the public interest entities. The relationships with the current or future investors, with the financers, with the investment analysts, with the media are of great importance for the accomplishment of the scopes related to the image and credibility of the public interest entity and mean a correct and fluent communication.

  14. An Evaluation of Automated Code Generation with the PetriCode Approach

    DEFF Research Database (Denmark)

    Simonsen, Kent Inge

    2014-01-01

    Automated code generation is an important element of model driven development methodologies. We have previously proposed an approach for code generation based on Coloured Petri Net models annotated with textual pragmatics for the network protocol domain. In this paper, we present and evaluate thr...... important properties of our approach: platform independence, code integratability, and code readability. The evaluation shows that our approach can generate code for a wide range of platforms which is integratable and readable....

  15. Influence of the Good-Practice Principles and Codes in the Corporate Governance upon the Quality of the Financial-Accounting Information

    OpenAIRE

    Mirela Niculae

    2017-01-01

    This hereby works tries to identify the principles regarding the corporate governance and analyze the way in which such corporate governance templates influence the qualitative characteristics of the financial information. The execution of the governance means the obligation to implement the processes and structures corresponding to the management and the administration of the business and company’s operations, to provide their good operation. The final scope of the good corporate governance ...

  16. Development of Probabilistic Internal Dosimetry Computer Code

    Energy Technology Data Exchange (ETDEWEB)

    Noh, Siwan [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kwon, Tae-Eun [Korea Institute of Radiological and Medical Sciences, Seoul (Korea, Republic of); Lee, Jai-Ki [Korean Association for Radiation Protection, Seoul (Korea, Republic of)

    2017-02-15

    Internal radiation dose assessment involves biokinetic models, the corresponding parameters, measured data, and many assumptions. Every component considered in the internal dose assessment has its own uncertainty, which is propagated in the intake activity and internal dose estimates. For research or scientific purposes, and for retrospective dose reconstruction for accident scenarios occurring in workplaces having a large quantity of unsealed radionuclides, such as nuclear power plants, nuclear fuel cycle facilities, and facilities in which nuclear medicine is practiced, a quantitative uncertainty assessment of the internal dose is often required. However, no calculation tools or computer codes that incorporate all the relevant processes and their corresponding uncertainties, i.e., from the measured data to the committed dose, are available. Thus, the objective of the present study is to develop an integrated probabilistic internal-dose-assessment computer code. First, the uncertainty components in internal dosimetry are identified, and quantitative uncertainty data are collected. Then, an uncertainty database is established for each component. In order to propagate these uncertainties in an internal dose assessment, a probabilistic internal-dose-assessment system that employs the Bayesian and Monte Carlo methods. Based on the developed system, we developed a probabilistic internal-dose-assessment code by using MATLAB so as to estimate the dose distributions from the measured data with uncertainty. Using the developed code, we calculated the internal dose distribution and statistical values (e.g. the 2.5{sup th}, 5{sup th}, median, 95{sup th}, and 97.5{sup th} percentiles) for three sample scenarios. On the basis of the distributions, we performed a sensitivity analysis to determine the influence of each component on the resulting dose in order to identify the major component of the uncertainty in a bioassay. The results of this study can be applied to various

  17. Development of Probabilistic Internal Dosimetry Computer Code

    International Nuclear Information System (INIS)

    Noh, Siwan; Kwon, Tae-Eun; Lee, Jai-Ki

    2017-01-01

    Internal radiation dose assessment involves biokinetic models, the corresponding parameters, measured data, and many assumptions. Every component considered in the internal dose assessment has its own uncertainty, which is propagated in the intake activity and internal dose estimates. For research or scientific purposes, and for retrospective dose reconstruction for accident scenarios occurring in workplaces having a large quantity of unsealed radionuclides, such as nuclear power plants, nuclear fuel cycle facilities, and facilities in which nuclear medicine is practiced, a quantitative uncertainty assessment of the internal dose is often required. However, no calculation tools or computer codes that incorporate all the relevant processes and their corresponding uncertainties, i.e., from the measured data to the committed dose, are available. Thus, the objective of the present study is to develop an integrated probabilistic internal-dose-assessment computer code. First, the uncertainty components in internal dosimetry are identified, and quantitative uncertainty data are collected. Then, an uncertainty database is established for each component. In order to propagate these uncertainties in an internal dose assessment, a probabilistic internal-dose-assessment system that employs the Bayesian and Monte Carlo methods. Based on the developed system, we developed a probabilistic internal-dose-assessment code by using MATLAB so as to estimate the dose distributions from the measured data with uncertainty. Using the developed code, we calculated the internal dose distribution and statistical values (e.g. the 2.5 th , 5 th , median, 95 th , and 97.5 th percentiles) for three sample scenarios. On the basis of the distributions, we performed a sensitivity analysis to determine the influence of each component on the resulting dose in order to identify the major component of the uncertainty in a bioassay. The results of this study can be applied to various situations. In cases

  18. Computation of the bounce-average code

    International Nuclear Information System (INIS)

    Cutler, T.A.; Pearlstein, L.D.; Rensink, M.E.

    1977-01-01

    The bounce-average computer code simulates the two-dimensional velocity transport of ions in a mirror machine. The code evaluates and bounce-averages the collision operator and sources along the field line. A self-consistent equilibrium magnetic field is also computed using the long-thin approximation. Optionally included are terms that maintain μ, J invariance as the magnetic field changes in time. The assumptions and analysis that form the foundation of the bounce-average code are described. When references can be cited, the required results are merely stated and explained briefly. A listing of the code is appended

  19. Description of the THYDE-P code

    International Nuclear Information System (INIS)

    Asahi, Yoshiro

    1978-07-01

    This paper is a preliminary report about the methods and the models applied to a computer code named THYDE-P which is concerned with thermal-hydraulic transients of a PWR plant following a large or small area break of a primary coolant system pipe, generally referred to as a loss-of-coolant accident (LOCA). The THYDE-P code deals not only with blowdown phase, but also with reflooding phase. What characterizes the THYDE-P code is its entirely new model for the primary loop network. The code user information and the programming detail are not included in this report, but in a future documentation. (auth.)

  20. Myths and realities of rateless coding

    KAUST Repository

    Bonello, Nicholas

    2011-08-01

    Fixed-rate and rateless channel codes are generally treated separately in the related research literature and so, a novice in the field inevitably gets the impression that these channel codes are unrelated. By contrast, in this treatise, we endeavor to further develop a link between the traditional fixed-rate codes and the recently developed rateless codes by delving into their underlying attributes. This joint treatment is beneficial for two principal reasons. First, it facilitates the task of researchers and practitioners, who might be familiar with fixed-rate codes and would like to jump-start their understanding of the recently developed concepts in the rateless reality. Second, it provides grounds for extending the use of the well-understood codedesign tools-originally contrived for fixed-rate codes-to the realm of rateless codes. Indeed, these versatile tools proved to be vital in the design of diverse fixed-rate-coded communications systems, and thus our hope is that they will further elucidate the associated performance ramifications of the rateless coded schemes. © 2011 IEEE.

  1. The Development of a White Water Rafting Code of Practice in Response to Multiple Fatalities in Queensland: How Will It Impact the Commercial and Educational Sector?

    Science.gov (United States)

    Murray, Sean

    2015-01-01

    In this article I review lessons to be learned from five commercial rafting participant fatalities in Northern Queensland between 2007 and 2009, and examine some implications of the coroner's recommendations from an outdoor education perspective. I aim both to help prevent future fatalities and to contribute to discussion about how best to achieve…

  2. Council Adopts New AERA Code of Ethics: Ethics Committee to Emphasize Ethics Education

    Science.gov (United States)

    Herrington, Carolyn D.

    2011-01-01

    At its February 2011 meeting, the AERA Council adopted unanimously a new Code of Ethics. The Code articulates a set of standards for education researchers in education and provides principles and guidance by which they can build ethical practices in professional, scholarly, and scientific activities. The Code reflects the Association's strong…

  3. Resources for Governing Board on Codes of Ethics

    Science.gov (United States)

    Community College League of California, 2009

    2009-01-01

    Reprinted herein is Chapter 14 of the "2007 Trustee Handbook," published by the Community College League of California. Contents include: (1) Ethics and Laws; (2) Sample Statements: Codes of Ethics and Standards for Practice; (3) Association of Community College Trustees Models; and (4) Upholding Board Ethics.

  4. [Towards a new Tunisian Medical Code of Deontology].

    Science.gov (United States)

    Aissaoui, Abir; Haj Salem, Nidhal; Chadly, Ali

    2010-06-01

    The Medical Code of Deontology is a legal text including the physician's duties towards his patients, colleagues, auxiliaries and the community. Considering the scientific, legal and social changes, the deontology code should be revised periodically. The first Tunisian Medical Code of Deontology (TMCD) was promulgated in 1973 and abrogated in 1993 by the new Code. This version has never been reviewed and does not seem to fit the current conditions of medical practice. The TMCD does not contain texts referring to information given to the patient, pain control, palliative care and management of the end of life as well as protection of medical data. Furthermore, the TMCD does not include rules related to tissues and organs transplantation and medical assisted human reproduction in accordance with Tunisian legal texts. We aim in this paper at analyzing the insufficiencies of the TMCD and suggesting modifications in order to update it.

  5. Coding Labour

    Directory of Open Access Journals (Sweden)

    Anthony McCosker

    2014-03-01

    Full Text Available As well as introducing the Coding Labour section, the authors explore the diffusion of code across the material contexts of everyday life, through the objects and tools of mediation, the systems and practices of cultural production and organisational management, and in the material conditions of labour. Taking code beyond computation and software, their specific focus is on the increasingly familiar connections between code and labour with a focus on the codification and modulation of affect through technologies and practices of management within the contemporary work organisation. In the grey literature of spreadsheets, minutes, workload models, email and the like they identify a violence of forms through which workplace affect, in its constant flux of crisis and ‘prodromal’ modes, is regulated and governed.

  6. Becoming Inclusive: A Code of Conduct for Inclusion and Diversity.

    Science.gov (United States)

    Schmidt, Bonnie J; MacWilliams, Brent R; Neal-Boylan, Leslie

    There are increasing concerns about exclusionary behaviors and lack of diversity in the nursing profession. Exclusionary behaviors, which may include incivility, bullying, and workplace violence, discriminate and isolate individuals and groups who are different, whereas inclusive behaviors encourage diversity. To address inclusion and diversity in nursing, this article offers a code of conduct. This code of conduct builds on existing nursing codes of ethics and applies to nursing students and nurses in both educational and practice settings. Inclusive behaviors that are demonstrated in nurses' relationships with patients, colleagues, the profession, and society are described. This code of conduct provides a basis for measureable change, empowerment, and unification of the profession. Recommendations, implications, and a pledge to action are discussed. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. "Hour of Code": A Case Study

    Science.gov (United States)

    Du, Jie; Wimmer, Hayden; Rada, Roy

    2018-01-01

    This study investigates the delivery of the "Hour of Code" tutorials to college students. The college students who participated in this study were surveyed about their opinion of the Hour of Code. First, the students' comments were discussed. Next, a content analysis of the offered tutorials highlights their reliance on visual…

  8. On the construction of capacity-achieving lattice Gaussian codes

    KAUST Repository

    Alghamdi, Wael Mohammed Abdullah

    2016-08-15

    In this paper, we propose a new approach to proving results regarding channel coding schemes based on construction-A lattices for the Additive White Gaussian Noise (AWGN) channel that yields new characterizations of the code construction parameters, i.e., the primes and dimensions of the codes, as functions of the block-length. The approach we take introduces an averaging argument that explicitly involves the considered parameters. This averaging argument is applied to a generalized Loeliger ensemble [1] to provide a more practical proof of the existence of AWGN-good lattices, and to characterize suitable parameters for the lattice Gaussian coding scheme proposed by Ling and Belfiore [3]. © 2016 IEEE.

  9. On the construction of capacity-achieving lattice Gaussian codes

    KAUST Repository

    Alghamdi, Wael; Abediseid, Walid; Alouini, Mohamed-Slim

    2016-01-01

    In this paper, we propose a new approach to proving results regarding channel coding schemes based on construction-A lattices for the Additive White Gaussian Noise (AWGN) channel that yields new characterizations of the code construction parameters, i.e., the primes and dimensions of the codes, as functions of the block-length. The approach we take introduces an averaging argument that explicitly involves the considered parameters. This averaging argument is applied to a generalized Loeliger ensemble [1] to provide a more practical proof of the existence of AWGN-good lattices, and to characterize suitable parameters for the lattice Gaussian coding scheme proposed by Ling and Belfiore [3]. © 2016 IEEE.

  10. Distinct timescales of population coding across cortex.

    Science.gov (United States)

    Runyan, Caroline A; Piasini, Eugenio; Panzeri, Stefano; Harvey, Christopher D

    2017-08-03

    The cortex represents information across widely varying timescales. For instance, sensory cortex encodes stimuli that fluctuate over few tens of milliseconds, whereas in association cortex behavioural choices can require the maintenance of information over seconds. However, it remains poorly understood whether diverse timescales result mostly from features intrinsic to individual neurons or from neuronal population activity. This question remains unanswered, because the timescales of coding in populations of neurons have not been studied extensively, and population codes have not been compared systematically across cortical regions. Here we show that population codes can be essential to achieve long coding timescales. Furthermore, we find that the properties of population codes differ between sensory and association cortices. We compared coding for sensory stimuli and behavioural choices in auditory cortex and posterior parietal cortex as mice performed a sound localization task. Auditory stimulus information was stronger in auditory cortex than in posterior parietal cortex, and both regions contained choice information. Although auditory cortex and posterior parietal cortex coded information by tiling in time neurons that were transiently informative for approximately 200 milliseconds, the areas had major differences in functional coupling between neurons, measured as activity correlations that could not be explained by task events. Coupling among posterior parietal cortex neurons was strong and extended over long time lags, whereas coupling among auditory cortex neurons was weak and short-lived. Stronger coupling in posterior parietal cortex led to a population code with long timescales and a representation of choice that remained consistent for approximately 1 second. In contrast, auditory cortex had a code with rapid fluctuations in stimulus and choice information over hundreds of milliseconds. Our results reveal that population codes differ across cortex

  11. Potential of the MCNP computer code

    International Nuclear Information System (INIS)

    Kyncl, J.

    1995-01-01

    The MCNP code is designed for numerical solution of neutron, photon, and electron transport problems by the Monte Carlo method. The code is based on the linear transport theory of behavior of the differential flux of the particles. The code directly uses data from the cross section point data library for input. Experience is outlined, gained in the application of the code to the calculation of the effective parameters of fuel assemblies and of the entire reactor core, to the determination of the effective parameters of the elementary fuel cell, and to the numerical solution of neutron diffusion and/or transport problems of the fuel assembly. The agreement between the calculated and observed data gives evidence that the MCNP code can be used with advantage for calculations involving WWER type fuel assemblies. (J.B.). 4 figs., 6 refs

  12. Implatation of MC2 computer code

    International Nuclear Information System (INIS)

    Seehusen, J.; Nair, R.P.K.; Becceneri, J.C.

    1981-01-01

    The implantation of MC2 computer code in the CDC system is presented. The MC2 computer code calculates multigroup cross sections for tipical compositions of fast reactors. The multigroup constants are calculated using solutions of PI or BI approximations for determined buckling value as weighting function. (M.C.K.) [pt

  13. Modification and testing of the code POLLA

    International Nuclear Information System (INIS)

    Carlson, B.V.; Chalhoub, E.S.; Melnikoff, M.

    1985-01-01

    The implantation and testing of POLLA computer code which translates the paramters of solved resonance for low energy neutrons by Reich-Moore formalism into the equivalent Adler-Adler ones are discussed. The POLLA computer code was developed by Nuclear Data Center of Instituto de Estudos Avancados, in Brazil, to solve actinide resonance cross sections. (Author) [pt

  14. Cracking the code of oscillatory activity.

    Directory of Open Access Journals (Sweden)

    Philippe G Schyns

    2011-05-01

    Full Text Available Neural oscillations are ubiquitous measurements of cognitive processes and dynamic routing and gating of information. The fundamental and so far unresolved problem for neuroscience remains to understand how oscillatory activity in the brain codes information for human cognition. In a biologically relevant cognitive task, we instructed six human observers to categorize facial expressions of emotion while we measured the observers' EEG. We combined state-of-the-art stimulus control with statistical information theory analysis to quantify how the three parameters of oscillations (i.e., power, phase, and frequency code the visual information relevant for behavior in a cognitive task. We make three points: First, we demonstrate that phase codes considerably more information (2.4 times relating to the cognitive task than power. Second, we show that the conjunction of power and phase coding reflects detailed visual features relevant for behavioral response--that is, features of facial expressions predicted by behavior. Third, we demonstrate, in analogy to communication technology, that oscillatory frequencies in the brain multiplex the coding of visual features, increasing coding capacity. Together, our findings about the fundamental coding properties of neural oscillations will redirect the research agenda in neuroscience by establishing the differential role of frequency, phase, and amplitude in coding behaviorally relevant information in the brain.

  15. The Development of the World Anti-Doping Code.

    Science.gov (United States)

    Young, Richard

    2017-01-01

    This chapter addresses both the development and substance of the World Anti-Doping Code, which came into effect in 2003, as well as the subsequent Code amendments, which came into effect in 2009 and 2015. Through an extensive process of stakeholder input and collaboration, the World Anti-Doping Code has transformed the hodgepodge of inconsistent and competing pre-2003 anti-doping rules into a harmonized and effective approach to anti-doping. The Code, as amended, is now widely recognized worldwide as the gold standard in anti-doping. The World Anti-Doping Code originally went into effect on January 1, 2004. The first amendments to the Code went into effect on January 1, 2009, and the second amendments on January 1, 2015. The Code and the related international standards are the product of a long and collaborative process designed to make the fight against doping more effective through the adoption and implementation of worldwide harmonized rules and best practices. © 2017 S. Karger AG, Basel.

  16. Libraries as Facilitators of Coding for All

    Science.gov (United States)

    Martin, Crystle

    2017-01-01

    Learning to code has been an increasingly frequent topic of conversation both in academic circles and popular media. Learning to code recently received renewed attention with the announcement of the White House's Computer Science for All initiative (Smith 2016). This initiative intends "to empower all American students from kindergarten…

  17. Parallelization of 2-D lattice Boltzmann codes

    International Nuclear Information System (INIS)

    Suzuki, Soichiro; Kaburaki, Hideo; Yokokawa, Mitsuo.

    1996-03-01

    Lattice Boltzmann (LB) codes to simulate two dimensional fluid flow are developed on vector parallel computer Fujitsu VPP500 and scalar parallel computer Intel Paragon XP/S. While a 2-D domain decomposition method is used for the scalar parallel LB code, a 1-D domain decomposition method is used for the vector parallel LB code to be vectorized along with the axis perpendicular to the direction of the decomposition. High parallel efficiency of 95.1% by the vector parallel calculation on 16 processors with 1152x1152 grid and 88.6% by the scalar parallel calculation on 100 processors with 800x800 grid are obtained. The performance models are developed to analyze the performance of the LB codes. It is shown by our performance models that the execution speed of the vector parallel code is about one hundred times faster than that of the scalar parallel code with the same number of processors up to 100 processors. We also analyze the scalability in keeping the available memory size of one processor element at maximum. Our performance model predicts that the execution time of the vector parallel code increases about 3% on 500 processors. Although the 1-D domain decomposition method has in general a drawback in the interprocessor communication, the vector parallel LB code is still suitable for the large scale and/or high resolution simulations. (author)

  18. Parallelization of 2-D lattice Boltzmann codes

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Soichiro; Kaburaki, Hideo; Yokokawa, Mitsuo

    1996-03-01

    Lattice Boltzmann (LB) codes to simulate two dimensional fluid flow are developed on vector parallel computer Fujitsu VPP500 and scalar parallel computer Intel Paragon XP/S. While a 2-D domain decomposition method is used for the scalar parallel LB code, a 1-D domain decomposition method is used for the vector parallel LB code to be vectorized along with the axis perpendicular to the direction of the decomposition. High parallel efficiency of 95.1% by the vector parallel calculation on 16 processors with 1152x1152 grid and 88.6% by the scalar parallel calculation on 100 processors with 800x800 grid are obtained. The performance models are developed to analyze the performance of the LB codes. It is shown by our performance models that the execution speed of the vector parallel code is about one hundred times faster than that of the scalar parallel code with the same number of processors up to 100 processors. We also analyze the scalability in keeping the available memory size of one processor element at maximum. Our performance model predicts that the execution time of the vector parallel code increases about 3% on 500 processors. Although the 1-D domain decomposition method has in general a drawback in the interprocessor communication, the vector parallel LB code is still suitable for the large scale and/or high resolution simulations. (author).

  19. Vectorization of three-dimensional neutron diffusion code CITATION

    International Nuclear Information System (INIS)

    Harada, Hiroo; Ishiguro, Misako

    1985-01-01

    Three-dimensional multi-group neutron diffusion code CITATION has been widely used for reactor criticality calculations. The code is expected to be run at a high speed by using recent vector supercomputers, when it is appropriately vectorized. In this paper, vectorization methods and their effects are described for the CITATION code. Especially, calculation algorithms suited for vectorization of the inner-outer iterative calculations which spend most of the computing time are discussed. The SLOR method, which is used in the original CITATION code, and the SOR method, which is adopted in the revised code, are vectorized by odd-even mesh ordering. The vectorized CITATION code is executed on the FACOM VP-100 and VP-200 computers, and is found to run over six times faster than the original code for a practical-scale problem. The initial value of the relaxation factor and the number of inner-iterations given as input data are also investigated since the computing time depends on these values. (author)

  20. Pharmaceutical Industry Off-label Promotion and Self-regulation: A Document Analysis of Off-label Promotion Rulings by the United Kingdom Prescription Medicines Code of Practice Authority 2003-2012.

    Directory of Open Access Journals (Sweden)

    Andreas Vilhelmsson

    2016-01-01

    Full Text Available European Union law prohibits companies from marketing drugs off-label. In the United Kingdom--as in some other European countries, but unlike the United States--industry self-regulatory bodies are tasked with supervising compliance with marketing rules. The objectives of this study were to (1 characterize off-label promotion rulings in the UK compared to the whistleblower-initiated cases in the US and (2 shed light on the UK self-regulatory mechanism for detecting, deterring, and sanctioning off-label promotion.We conducted structured reviews of rulings by the UK self-regulatory authority, the Prescription Medicines Code of Practice Authority (PMCPA, between 2003 and 2012. There were 74 off-label promotion rulings involving 43 companies and 65 drugs. Nineteen companies were ruled in breach more than once, and ten companies were ruled in breach three or more times over the 10-y period. Drawing on a typology previously developed to analyse US whistleblower complaints, we coded and analysed the apparent strategic goals of each off-label marketing scheme and the practices consistent with those alleged goals. 50% of rulings cited efforts to expand drug use to unapproved indications, and 39% and 38% cited efforts to expand beyond approved disease entities and dosing strategies, respectively. The most frequently described promotional tactic was attempts to influence prescribers (n = 72, 97%, using print material (70/72, 97%, for example, advertisements (21/70, 30%. Although rulings cited prescribers as the prime target of off-label promotion, competing companies lodged the majority of complaints (prescriber: n = 16, 22%, versus companies: n = 42, 57%. Unlike US whistleblower complaints, few UK rulings described practices targeting consumers (n = 3, 4%, payers (n = 2, 3%, or company staff (n = 2, 3%. Eight UK rulings (11% pertaining to six drugs described promotion of the same drug for the same off-label use as was alleged by whistleblowers in the US

  1. Pharmaceutical Industry Off-label Promotion and Self-regulation: A Document Analysis of Off-label Promotion Rulings by the United Kingdom Prescription Medicines Code of Practice Authority 2003-2012.

    Science.gov (United States)

    Vilhelmsson, Andreas; Davis, Courtney; Mulinari, Shai

    2016-01-01

    European Union law prohibits companies from marketing drugs off-label. In the United Kingdom--as in some other European countries, but unlike the United States--industry self-regulatory bodies are tasked with supervising compliance with marketing rules. The objectives of this study were to (1) characterize off-label promotion rulings in the UK compared to the whistleblower-initiated cases in the US and (2) shed light on the UK self-regulatory mechanism for detecting, deterring, and sanctioning off-label promotion. We conducted structured reviews of rulings by the UK self-regulatory authority, the Prescription Medicines Code of Practice Authority (PMCPA), between 2003 and 2012. There were 74 off-label promotion rulings involving 43 companies and 65 drugs. Nineteen companies were ruled in breach more than once, and ten companies were ruled in breach three or more times over the 10-y period. Drawing on a typology previously developed to analyse US whistleblower complaints, we coded and analysed the apparent strategic goals of each off-label marketing scheme and the practices consistent with those alleged goals. 50% of rulings cited efforts to expand drug use to unapproved indications, and 39% and 38% cited efforts to expand beyond approved disease entities and dosing strategies, respectively. The most frequently described promotional tactic was attempts to influence prescribers (n = 72, 97%), using print material (70/72, 97%), for example, advertisements (21/70, 30%). Although rulings cited prescribers as the prime target of off-label promotion, competing companies lodged the majority of complaints (prescriber: n = 16, 22%, versus companies: n = 42, 57%). Unlike US whistleblower complaints, few UK rulings described practices targeting consumers (n = 3, 4%), payers (n = 2, 3%), or company staff (n = 2, 3%). Eight UK rulings (11%) pertaining to six drugs described promotion of the same drug for the same off-label use as was alleged by whistleblowers in the US. However

  2. Pharmaceutical Industry Off-label Promotion and Self-regulation: A Document Analysis of Off-label Promotion Rulings by the United Kingdom Prescription Medicines Code of Practice Authority 2003–2012

    Science.gov (United States)

    Vilhelmsson, Andreas; Davis, Courtney; Mulinari, Shai

    2016-01-01

    Background European Union law prohibits companies from marketing drugs off-label. In the United Kingdom—as in some other European countries, but unlike the United States—industry self-regulatory bodies are tasked with supervising compliance with marketing rules. The objectives of this study were to (1) characterize off-label promotion rulings in the UK compared to the whistleblower-initiated cases in the US and (2) shed light on the UK self-regulatory mechanism for detecting, deterring, and sanctioning off-label promotion. Methods and Findings We conducted structured reviews of rulings by the UK self-regulatory authority, the Prescription Medicines Code of Practice Authority (PMCPA), between 2003 and 2012. There were 74 off-label promotion rulings involving 43 companies and 65 drugs. Nineteen companies were ruled in breach more than once, and ten companies were ruled in breach three or more times over the 10-y period. Drawing on a typology previously developed to analyse US whistleblower complaints, we coded and analysed the apparent strategic goals of each off-label marketing scheme and the practices consistent with those alleged goals. 50% of rulings cited efforts to expand drug use to unapproved indications, and 39% and 38% cited efforts to expand beyond approved disease entities and dosing strategies, respectively. The most frequently described promotional tactic was attempts to influence prescribers (n = 72, 97%), using print material (70/72, 97%), for example, advertisements (21/70, 30%). Although rulings cited prescribers as the prime target of off-label promotion, competing companies lodged the majority of complaints (prescriber: n = 16, 22%, versus companies: n = 42, 57%). Unlike US whistleblower complaints, few UK rulings described practices targeting consumers (n = 3, 4%), payers (n = 2, 3%), or company staff (n = 2, 3%). Eight UK rulings (11%) pertaining to six drugs described promotion of the same drug for the same off-label use as was alleged by

  3. Limitations in the Traditional Code of Journalistic Responsibility.

    Science.gov (United States)

    Capo, James A.

    Objectivity, truth, freedom, and social responsibility--key principles in contemporary media ethics--fail to provide a practical, coherent code for responsible journalism. During the initial television coverage of Watergate on June 19, 1972, for example, the three television networks all observed these standards in their reporting, yet presented…

  4. Survey Of Lossless Image Coding Techniques

    Science.gov (United States)

    Melnychuck, Paul W.; Rabbani, Majid

    1989-04-01

    Many image transmission/storage applications requiring some form of data compression additionally require that the decoded image be an exact replica of the original. Lossless image coding algorithms meet this requirement by generating a decoded image that is numerically identical to the original. Several lossless coding techniques are modifications of well-known lossy schemes, whereas others are new. Traditional Markov-based models and newer arithmetic coding techniques are applied to predictive coding, bit plane processing, and lossy plus residual coding. Generally speaking, the compression ratio offered by these techniques are in the area of 1.6:1 to 3:1 for 8-bit pictorial images. Compression ratios for 12-bit radiological images approach 3:1, as these images have less detailed structure, and hence, their higher pel correlation leads to a greater removal of image redundancy.

  5. Coding for urologic office procedures.

    Science.gov (United States)

    Dowling, Robert A; Painter, Mark

    2013-11-01

    This article summarizes current best practices for documenting, coding, and billing common office-based urologic procedures. Topics covered include general principles, basic and advanced urologic coding, creation of medical records that support compliant coding practices, bundled codes and unbundling, global periods, modifiers for procedure codes, when to bill for evaluation and management services during the same visit, coding for supplies, and laboratory and radiology procedures pertinent to urology practice. Detailed information is included for the most common urology office procedures, and suggested resources and references are provided. This information is of value to physicians, office managers, and their coding staff. Copyright © 2013 Elsevier Inc. All rights reserved.

  6. Soft-decision decoding of RS codes

    DEFF Research Database (Denmark)

    Justesen, Jørn

    2005-01-01

    By introducing a few simplifying assumptions we derive a simple condition for successful decoding using the Koetter-Vardy algorithm for soft-decision decoding of RS codes. We show that the algorithm has a significant advantage over hard decision decoding when the code rate is low, when two or more...

  7. The structure of dual Grassmann codes

    DEFF Research Database (Denmark)

    Beelen, Peter; Pinero, Fernando

    2016-01-01

    In this article we study the duals of Grassmann codes, certain codes coming from the Grassmannian variety. Exploiting their structure, we are able to count and classify all their minimum weight codewords. In this classification the lines lying on the Grassmannian variety play a central role. Rela...

  8. Applications of Coding in Network Communications

    Science.gov (United States)

    Chang, Christopher SungWook

    2012-01-01

    This thesis uses the tool of network coding to investigate fast peer-to-peer file distribution, anonymous communication, robust network construction under uncertainty, and prioritized transmission. In a peer-to-peer file distribution system, we use a linear optimization approach to show that the network coding framework significantly simplifies…

  9. Implementation of constitutive equations for creep damage mechanics into the ABAQUS finite element code - some practical cases in high temperature component design and life assessment

    International Nuclear Information System (INIS)

    Segle, P.; Samuelson, L.Aa.; Andersson, Peder; Moberg, F.

    1996-01-01

    Constitutive equations for creep damage mechanics are implemented into the finite element program ABAQUS using a user supplied subroutine, UMAT. A modified Kachanov-Rabotnov constitutive equation which accounts for inhomogeneity in creep damage is used. With a user defined material a number of bench mark tests are analyzed for verification. In the cases where analytical solutions exist, the numerical results agree very well. In other cases, the creep damage evolution response appear to be realistic in comparison with laboratory creep tests. The appropriateness of using the creep damage mechanics concept in design and life assessment of high temperature components is demonstrated. 18 refs

  10. Utility of QR codes in biological collections.

    Science.gov (United States)

    Diazgranados, Mauricio; Funk, Vicki A

    2013-01-01

    The popularity of QR codes for encoding information such as URIs has increased exponentially in step with the technological advances and availability of smartphones, digital tablets, and other electronic devices. We propose using QR codes on specimens in biological collections to facilitate linking vouchers' electronic information with their associated collections. QR codes can efficiently provide such links for connecting collections, photographs, maps, ecosystem notes, citations, and even GenBank sequences. QR codes have numerous advantages over barcodes, including their small size, superior security mechanisms, increased complexity and quantity of information, and low implementation cost. The scope of this paper is to initiate an academic discussion about using QR codes on specimens in biological collections.

  11. Utility of QR codes in biological collections

    Directory of Open Access Journals (Sweden)

    Mauricio Diazgranados

    2013-07-01

    Full Text Available The popularity of QR codes for encoding information such as URIs has increased exponentially in step with the technological advances and availability of smartphones, digital tablets, and other electronic devices. We propose using QR codes on specimens in biological collections to facilitate linking vouchers’ electronic information with their associated collections. QR codes can efficiently provide such links for connecting collections, photographs, maps, ecosystem notes, citations, and even GenBank sequences. QR codes have numerous advantages over barcodes, including their small size, superior security mechanisms, increased complexity and quantity of information, and low implementation cost. The scope of this paper is to initiate an academic discussion about using QR codes on specimens in biological collections.

  12. Coding in Muscle Disease.

    Science.gov (United States)

    Jones, Lyell K; Ney, John P

    2016-12-01

    Accurate coding is critically important for clinical practice and research. Ongoing changes to diagnostic and billing codes require the clinician to stay abreast of coding updates. Payment for health care services, data sets for health services research, and reporting for medical quality improvement all require accurate administrative coding. This article provides an overview of administrative coding for patients with muscle disease and includes a case-based review of diagnostic and Evaluation and Management (E/M) coding principles in patients with myopathy. Procedural coding for electrodiagnostic studies and neuromuscular ultrasound is also reviewed.

  13. NATO Guide for Judgement-Based Operational Analysis in Defence Decision Making : Analyst-Oriented Volume - Code of Best Practice for Soft Operational Analysis

    NARCIS (Netherlands)

    Wijnmalen, D.J.D.; et al

    2012-01-01

    Judgment plays an important role in all Operational Analysis (OA). NATO practitioners have determined that approaches in OA that are based on human judgement are increasingly critical to defence decision making. The purpose of the NATO Guide for Judgement-Based OA in Defence Decision Making is to

  14. Systemization of burnup sensitivity analysis code

    International Nuclear Information System (INIS)

    Tatsumi, Masahiro; Hyoudou, Hideaki

    2004-02-01

    To practical use of fact reactors, it is a very important subject to improve prediction accuracy for neutronic properties in LMFBR cores from the viewpoints of improvements on plant efficiency with rationally high performance cores and that on reliability and safety margins. A distinct improvement on accuracy in nuclear core design has been accomplished by development of adjusted nuclear library using the cross-section adjustment method, in which the results of critical experiments of JUPITER and so on are reflected. In the design of large LMFBR cores, however, it is important to accurately estimate not only neutronic characteristics, for example, reaction rate distribution and control rod worth but also burnup characteristics, for example, burnup reactivity loss, breeding ratio and so on. For this purpose, it is desired to improve prediction accuracy of burnup characteristics using the data widely obtained in actual core such as the experimental fast reactor core 'JOYO'. The analysis of burnup characteristics is needed to effectively use burnup characteristics data in the actual cores based on the cross-section adjustment method. So far, development of a analysis code for burnup sensitivity, SAGEP-BURN, has been done and confirmed its effectiveness. However, there is a problem that analysis sequence become inefficient because of a big burden to user due to complexity of the theory of burnup sensitivity and limitation of the system. It is also desired to rearrange the system for future revision since it is becoming difficult to implement new functionalities in the existing large system. It is not sufficient to unify each computational component for some reasons; computational sequence may be changed for each item being analyzed or for purpose such as interpretation of physical meaning. Therefore it is needed to systemize the current code for burnup sensitivity analysis with component blocks of functionality that can be divided or constructed on occasion. For this

  15. Systemization of burnup sensitivity analysis code. 2

    International Nuclear Information System (INIS)

    Tatsumi, Masahiro; Hyoudou, Hideaki

    2005-02-01

    Towards the practical use of fast reactors, it is a very important subject to improve prediction accuracy for neutronic properties in LMFBR cores from the viewpoint of improvements on plant efficiency with rationally high performance cores and that on reliability and safety margins. A distinct improvement on accuracy in nuclear core design has been accomplished by the development of adjusted nuclear library using the cross-section adjustment method, in which the results of criticality experiments of JUPITER and so on are reflected. In the design of large LMFBR cores, however, it is important to accurately estimate not only neutronic characteristics, for example, reaction rate distribution and control rod worth but also burnup characteristics, for example, burnup reactivity loss, breeding ratio and so on. For this purpose, it is desired to improve prediction accuracy of burnup characteristics using the data widely obtained in actual core such as the experimental fast reactor 'JOYO'. The analysis of burnup characteristics is needed to effectively use burnup characteristics data in the actual cores based on the cross-section adjustment method. So far, a burnup sensitivity analysis code, SAGEP-BURN, has been developed and confirmed its effectiveness. However, there is a problem that analysis sequence become inefficient because of a big burden to users due to complexity of the theory of burnup sensitivity and limitation of the system. It is also desired to rearrange the system for future revision since it is becoming difficult to implement new functions in the existing large system. It is not sufficient to unify each computational component for the following reasons; the computational sequence may be changed for each item being analyzed or for purpose such as interpretation of physical meaning. Therefore, it is needed to systemize the current code for burnup sensitivity analysis with component blocks of functionality that can be divided or constructed on occasion. For

  16. Error floor behavior study of LDPC codes for concatenated codes design

    Science.gov (United States)

    Chen, Weigang; Yin, Liuguo; Lu, Jianhua

    2007-11-01

    Error floor behavior of low-density parity-check (LDPC) codes using quantized decoding algorithms is statistically studied with experimental results on a hardware evaluation platform. The results present the distribution of the residual errors after decoding failure and reveal that the number of residual error bits in a codeword is usually very small using quantized sum-product (SP) algorithm. Therefore, LDPC code may serve as the inner code in a concatenated coding system with a high code rate outer code and thus an ultra low error floor can be achieved. This conclusion is also verified by the experimental results.

  17. Review of SKB's Code Documentation and Testing

    International Nuclear Information System (INIS)

    Hicks, T.W.

    2005-01-01

    SKB is in the process of developing the SR-Can safety assessment for a KBS 3 repository. The assessment will be based on quantitative analyses using a range of computational codes aimed at developing an understanding of how the repository system will evolve. Clear and comprehensive code documentation and testing will engender confidence in the results of the safety assessment calculations. This report presents the results of a review undertaken on behalf of SKI aimed at providing an understanding of how codes used in the SR 97 safety assessment and those planned for use in the SR-Can safety assessment have been documented and tested. Having identified the codes us ed by SKB, several codes were selected for review. Consideration was given to codes used directly in SKB's safety assessment calculations as well as to some of the less visible codes that are important in quantifying the different repository barrier safety functions. SKB's documentation and testing of the following codes were reviewed: COMP23 - a near-field radionuclide transport model developed by SKB for use in safety assessment calculations. FARF31 - a far-field radionuclide transport model developed by SKB for use in safety assessment calculations. PROPER - SKB's harness for executing probabilistic radionuclide transport calculations using COMP23 and FARF31. The integrated analytical radionuclide transport model that SKB has developed to run in parallel with COMP23 and FARF31. CONNECTFLOW - a discrete fracture network model/continuum model developed by Serco Assurance (based on the coupling of NAMMU and NAPSAC), which SKB is using to combine hydrogeological modelling on the site and regional scales in place of the HYDRASTAR code. DarcyTools - a discrete fracture network model coupled to a continuum model, recently developed by SKB for hydrogeological modelling, also in place of HYDRASTAR. ABAQUS - a finite element material model developed by ABAQUS, Inc, which is used by SKB to model repository buffer

  18. Code of Conduct on the Safety of Research Reactors

    International Nuclear Information System (INIS)

    2006-09-01

    with the advice of an expert Working Group. The revised draft was again circulated to all Member States for comment, along with the report of the Chairman of the expert Working Group. In March 2004, a final draft of the Code was submitted to the Board of Governors for adoption. When the Board of Governors adopted the Code of Conduct, it requested the Director General to circulate the approved Code of Conduct to all Member States and relevant international organizations and transmit it to the General Conference with a recommendation that the Conference endorse it and call for its wide application. In resolution GC(48)/RES/10.A.8, the 2004 General Conference welcomed the adoption of the Code by the Board, and endorsed the guidance for the safe operation of research reactors set out in the Code. It also encouraged Member States to apply the guidance in the Code to the management of research reactors. Finally, it requested the Secretariat to continue to assist Member States in the implementation of the Code and associated safety guidance within available resources. While the Code of Conduct on the Safety of Research Reactors is non-binding, it should serve as guidance on the development and harmonization of laws, regulations and policies on the safety of research reactors. It provides ''best practice'' guidance to the State, the regulatory body and the operating organization for management of research reactor safety. In accordance with resolution GC(48)/RES/10, Member States are encouraged to use this Code of Conduct as the basis upon which to regulate and conduct research reactor activities.

  19. Adaptive coded aperture imaging in the infrared: towards a practical implementation

    Science.gov (United States)

    Slinger, Chris W.; Gilholm, Kevin; Gordon, Neil; McNie, Mark; Payne, Doug; Ridley, Kevin; Strens, Malcolm; Todd, Mike; De Villiers, Geoff; Watson, Philip; Wilson, Rebecca; Dyer, Gavin; Eismann, Mike; Meola, Joe; Rogers, Stanley

    2008-08-01

    An earlier paper [1] discussed the merits of adaptive coded apertures for use as lensless imaging systems in the thermal infrared and visible. It was shown how diffractive (rather than the more conventional geometric) coding could be used, and that 2D intensity measurements from multiple mask patterns could be combined and decoded to yield enhanced imagery. Initial experimental results in the visible band were presented. Unfortunately, radiosity calculations, also presented in that paper, indicated that the signal to noise performance of systems using this approach was likely to be compromised, especially in the infrared. This paper will discuss how such limitations can be overcome, and some of the tradeoffs involved. Experimental results showing tracking and imaging performance of these modified, diffractive, adaptive coded aperture systems in the visible and infrared will be presented. The subpixel imaging and tracking performance is compared to that of conventional imaging systems and shown to be superior. System size, weight and cost calculations indicate that the coded aperture approach, employing novel photonic MOEMS micro-shutter architectures, has significant merits for a given level of performance in the MWIR when compared to more conventional imaging approaches.

  20. A unified form of exact-MSR codes via product-matrix frameworks

    KAUST Repository

    Lin, Sian Jheng

    2015-02-01

    Regenerating codes represent a class of block codes applicable for distributed storage systems. The [n, k, d] regenerating code has data recovery capability while possessing arbitrary k out of n code fragments, and supports the capability for code fragment regeneration through the use of other arbitrary d fragments, for k ≤ d ≤ n - 1. Minimum storage regenerating (MSR) codes are a subset of regenerating codes containing the minimal size of each code fragment. The first explicit construction of MSR codes that can perform exact regeneration (named exact-MSR codes) for d ≥ 2k - 2 has been presented via a product-matrix framework. This paper addresses some of the practical issues on the construction of exact-MSR codes. The major contributions of this paper include as follows. A new product-matrix framework is proposed to directly include all feasible exact-MSR codes for d ≥ 2k - 2. The mechanism for a systematic version of exact-MSR code is proposed to minimize the computational complexities for the process of message-symbol remapping. Two practical forms of encoding matrices are presented to reduce the size of the finite field.

  1. A unified form of exact-MSR codes via product-matrix frameworks

    KAUST Repository

    Lin, Sian Jheng; Chung, Weiho; Han, Yunghsiangsam; Al-Naffouri, Tareq Y.

    2015-01-01

    Regenerating codes represent a class of block codes applicable for distributed storage systems. The [n, k, d] regenerating code has data recovery capability while possessing arbitrary k out of n code fragments, and supports the capability for code fragment regeneration through the use of other arbitrary d fragments, for k ≤ d ≤ n - 1. Minimum storage regenerating (MSR) codes are a subset of regenerating codes containing the minimal size of each code fragment. The first explicit construction of MSR codes that can perform exact regeneration (named exact-MSR codes) for d ≥ 2k - 2 has been presented via a product-matrix framework. This paper addresses some of the practical issues on the construction of exact-MSR codes. The major contributions of this paper include as follows. A new product-matrix framework is proposed to directly include all feasible exact-MSR codes for d ≥ 2k - 2. The mechanism for a systematic version of exact-MSR code is proposed to minimize the computational complexities for the process of message-symbol remapping. Two practical forms of encoding matrices are presented to reduce the size of the finite field.

  2. Establishing a communications link between two different, incompatible, personal computers: with practical examples and illustrations and program code.

    Science.gov (United States)

    Davidson, R W

    1985-01-01

    The increasing need to communicate to exchange data can be handled by personal microcomputers. The necessity for the transference of information stored in one type of personal computer to another type of personal computer is often encountered in the process of integrating multiple sources of information stored in different and incompatible computers in Medical Research and Practice. A practical example is demonstrated with two relatively inexpensive commonly used computers, the IBM PC jr. and the Apple IIe. The basic input/output (I/O) interface chip for serial communication for each computer are joined together using a Null connector and cable to form a communications link. Using BASIC (Beginner's All-purpose Symbolic Instruction Code) Computer Language and the Disk Operating System (DOS) the communications handshaking protocol and file transfer is established between the two computers. The BASIC programming languages used are Applesoft (Apple Personal Computer) and PC BASIC (IBM Personal computer).

  3. Parallelization of Subchannel Analysis Code MATRA

    International Nuclear Information System (INIS)

    Kim, Seongjin; Hwang, Daehyun; Kwon, Hyouk

    2014-01-01

    A stand-alone calculation of MATRA code used up pertinent computing time for the thermal margin calculations while a relatively considerable time is needed to solve the whole core pin-by-pin problems. In addition, it is strongly required to improve the computation speed of the MATRA code to satisfy the overall performance of the multi-physics coupling calculations. Therefore, a parallel approach to improve and optimize the computability of the MATRA code is proposed and verified in this study. The parallel algorithm is embodied in the MATRA code using the MPI communication method and the modification of the previous code structure was minimized. An improvement is confirmed by comparing the results between the single and multiple processor algorithms. The speedup and efficiency are also evaluated when increasing the number of processors. The parallel algorithm was implemented to the subchannel code MATRA using the MPI. The performance of the parallel algorithm was verified by comparing the results with those from the MATRA with the single processor. It is also noticed that the performance of the MATRA code was greatly improved by implementing the parallel algorithm for the 1/8 core and whole core problems

  4. Vectorization of nuclear codes 90-1

    International Nuclear Information System (INIS)

    Nonomiya, Iwao; Nemoto, Toshiyuki; Ishiguro, Misako; Harada, Hiroo; Hori, Takeo.

    1990-09-01

    The vectorization has been made for four codes: SONATINA-2V HTTR version, TRIDOSE, VIENUS, and SCRYU. SONATINA-2V HTTR version is a code for analyzing the dynamic behavior of fuel blocks in the vertical slice of the HTGR (High Temperature Gas-cooled Reactor) core under seismic perturbation, TRIDOSE is a code for calculating environmental tritium concentration and dose, VIENUS is a code for analyzing visco elastic stress of the fuel block of HTTR (High Temperature gas-cooled Test Reactor), and SCRYU is a thermal-hydraulics code with boundary fitted coordinate system. The total speedup ratio of the vectorized versions to the original scalar ones is 5.2 for SONATINA-2V HTTR version. 5.9 ∼ 6.9 for TRIDOSE, 6.7 for VIENUS, 7.6 for SCRYU, respectively. In this report, we describe outline of codes, techniques used for the vectorization, verification of computed results, and speedup effect on the vectorized codes. (author)

  5. The clean coder a code of conduct for professional programmers

    CERN Document Server

    Martin, Robert C

    2011-01-01

    rogrammers who endure and succeed amidst swirling uncertainty and nonstop pressure share a common attribute: They care deeply about the practice of creating software. They treat it as a craft. They are professionals. In The Clean Coder: A Code of Conduct for Professional Programmers, legendary software expert Robert C. Martin introduces the disciplines, techniques, tools, and practices of true software craftsmanship. This book is packed with practical advice–about everything from estimating and coding to refactoring and testing. It covers much more than technique: It is about attitude. Martin shows how to approach software development with honor, self-respect, and pride; work well and work clean; communicate and estimate faithfully; face difficult decisions with clarity and honesty; and understand that deep knowledge comes with a responsibility to act. Readers will learn What it means to behave as a true software craftsman How to deal with conflict, tight schedules, and unreasonable manager...

  6. Statistical mechanics of error-correcting codes

    Science.gov (United States)

    Kabashima, Y.; Saad, D.

    1999-01-01

    We investigate the performance of error-correcting codes, where the code word comprises products of K bits selected from the original message and decoding is carried out utilizing a connectivity tensor with C connections per index. Shannon's bound for the channel capacity is recovered for large K and zero temperature when the code rate K/C is finite. Close to optimal error-correcting capability is obtained for finite K and C. We examine the finite-temperature case to assess the use of simulated annealing for decoding and extend the analysis to accommodate other types of noisy channels.

  7. Development of ADINA-J-integral code

    International Nuclear Information System (INIS)

    Kurihara, Ryoichi

    1988-07-01

    A general purpose finite element program ADINA (Automatic Dynamic Incremental Nonlinear Analysis), which was developed by Bathe et al., was revised to be able to calculate the J- and J-integral. This report introduced the numerical method to add this capability to the code, and the evaluation of the revised ADINA-J code by using a few of examples of the J estimation model, i.e. a compact tension specimen, a center cracked panel subjected to dynamic load, and a thick shell cylinder having inner axial crack subjected to thermal load. The evaluation testified the function of the revised code. (author)

  8. [Bioethical analysis of the Brazilian Dentistry Code of Ethics].

    Science.gov (United States)

    Pyrrho, Monique; do Prado, Mauro Machado; Cordón, Jorge; Garrafa, Volnei

    2009-01-01

    The Brazilian Dentistry Code of Ethics (DCE), Resolution CFO-71 from May 2006, is an instrument created to guide dentists' behavior in relation to the ethical aspects of professional practice. The purpose of the study is to analyze the above mentioned code comparing the deontological and bioethical focuses. In order to do so, an interpretative analysis of the code and of twelve selected texts was made. Six of the texts were about bioethics and six on deontology, and the analysis was made through the methodological classification of the context units, textual paragraphs and items from the code in the following categories: the referentials of bioethical principlism--autonomy, beneficence, nonmaleficence and justice -, technical aspects and moral virtues related to the profession. Together the four principles represented 22.9%, 39.8% and 54.2% of the content of the DCE, of the deontological texts and of the bioethical texts respectively. In the DCE, 42% of the items referred to virtues, 40.2% were associated to technical aspects and just 22.9% referred to principles. The virtues related to the professionals and the technical aspects together amounted to 70.1% of the code. Instead of focusing on the patient as the subject of the process of oral health care, the DCE focuses on the professional, and it is predominantly turned to legalistic and corporate aspects.

  9. Development of HTGR plant dynamics simulation code

    International Nuclear Information System (INIS)

    Ohashi, Kazutaka; Tazawa, Yujiro; Mitake, Susumu; Suzuki, Katsuo.

    1987-01-01

    Plant dynamics simulation analysis plays an important role in the design work of nuclear power plant especially in the plant safety analysis, control system analysis, and transient condition analysis. The authors have developed the plant dynamics simulation code named VESPER, which is applicable to the design work of High Temperature Engineering Test Reactor, and have been improving the code corresponding to the design changes made in the subsequent design works. This paper describes the outline of VESPER code and shows its sample calculation results selected from the recent design work. (author)

  10. Human resources managers as custodians of the King III code

    Directory of Open Access Journals (Sweden)

    Frank de Beer

    2015-05-01

    Full Text Available The objective of this research was to perform an exploratory study on the knowledge and understanding of the King III code among Human Resources (HR managers in South African companies. The King III code is a comprehensive international corporate governance regime which addresses the financial, social, ethical and environmental practices of organisations. HR management plays a role in managing corporate governance by using the King III code as a guideline. The main research questions were: Does HR management know, understand, apply, and have the ability to use the King III code in terms of ethical decision-making? What role does HR management play in corporate governance? A random sample of available HR managers, senior HR consultants and HR directors was taken and semi-structured interviews were conducted. The results indicated that the respondents had no in-depth knowledge of the King III code. They did not fully understand the King III code and its implications nor did they use it to ensure ethical management. The themes most emphasised by the participants were: culture, reward and remuneration, policies and procedures and performance management. The participants emphasised the importance of these items  and HR’s role in managing them.

  11. Code of Federal Regulations Title 21

    Data.gov (United States)

    U.S. Department of Health & Human Services — This database contains the most recent revision from the Government Printing Office (GPO) of the Code of Federal Regulations (CFR) Title 21 - Food and Drugs.

  12. Preliminary investigation study of code of developed country for developing Korean fuel cycle code

    International Nuclear Information System (INIS)

    Jeong, Chang Joon; Ko, Won Il; Lee, Ho Hee; Cho, Dong Keun; Park, Chang Je

    2012-01-01

    In order to develop Korean fuel cycle code, the analyses has been performed with the fuel cycle codes which are used in advanced country. Also, recommendations were proposed for future development. The fuel cycle codes are AS FLOOWS: VISTA which has been developed by IAEA, DANESS code which developed by ANL and LISTO, and VISION developed by INL for the Advanced Fuel Cycle Initiative (AFCI) system analysis. The recommended items were proposed for software, program scheme, material flow model, isotope decay model, environmental impact analysis model, and economics analysis model. The described things will be used for development of Korean nuclear fuel cycle code in future

  13. Utility experience in code updating of equipment built to 1974 code, Section 3, Subsection NF

    International Nuclear Information System (INIS)

    Rao, K.R.; Deshpande, N.

    1990-01-01

    This paper addresses changes to ASME Code Subsection NF and reconciles the differences between the updated codes and the as built construction code, of ASME Section III, 1974 to which several nuclear plants have been built. Since Section III is revised every three years and replacement parts complying with the construction code are invariably not available from the plant stock inventory, parts must be procured from vendors who comply with the requirements of the latest codes. Aspects of the ASME code which reflect Subsection NF are identified and compared with the later Code editions and addenda, especially up to and including the 1974 ASME code used as the basis for the plant qualification. The concern of the regulatory agencies is that if later code allowables and provisions are adopted it is possible to reduce the safety margins of the construction code. Areas of concern are highlighted and the specific changes of later codes are discerned; adoption of which, would not sacrifice the intended safety margins of the codes to which plants are licensed

  14. Overview of Grid Codes for Photovoltaic Integration

    DEFF Research Database (Denmark)

    Zheng, Qianwei; Li, Jiaming; Ai, Xiaomeng

    2017-01-01

    The increasing grid-connected photovoltaic (PV) power stations might threaten the safety and stability of power system. Therefore, the grid code is developed for PV power stations to ensure the security of PV integrated power systems. In this paper, requirements for PV power integration in differ...... in different grid codes are first investigated. On this basis, the future advocacy is concluded. Finally, several evaluation indices are proposed to quantify the grid code compliance so that the system operators can validate all these requirements by simulation....

  15. Cracking the Code: Assessing Institutional Compliance with the Australian Code for the Responsible Conduct of Research

    Science.gov (United States)

    Morris, Suzanne E.

    2010-01-01

    This paper provides a review of institutional authorship policies as required by the "Australian Code for the Responsible Conduct of Research" (the "Code") (National Health and Medical Research Council (NHMRC), the Australian Research Council (ARC) & Universities Australia (UA) 2007), and assesses them for Code compliance.…

  16. Validation of the reactor dynamics code HEXTRAN

    International Nuclear Information System (INIS)

    Kyrki-Rajamaeki, R.

    1994-05-01

    HEXTRAN is a new three-dimensional, hexagonal reactor dynamics code developed in the Technical Research Centre of Finland (VTT) for VVER type reactors. This report describes the validation work of HEXTRAN. The work has been made with the financing of the Finnish Centre for Radiation and Nuclear Safety (STUK). HEXTRAN is particularly intended for calculation of such accidents, in which radially asymmetric phenomena are included and both good neutron dynamics and two-phase thermal hydraulics are important. HEXTRAN is based on already validated codes. The models of these codes have been shown to function correctly also within the HEXTRAN code. The main new model of HEXTRAN, the spatial neutron kinetics model has been successfully validated against LR-0 test reactor and Loviisa plant measurements. Connected with SMABRE, HEXTRAN can be reliably used for calculation of transients including effects of the whole cooling system of VVERs. Further validation plans are also introduced in the report. (orig.). (23 refs., 16 figs., 2 tabs.)

  17. Code of Federal Regulations in XML

    Data.gov (United States)

    National Archives and Records Administration — The Code of Federal Regulations (CFR) is the codification of the general and permanent rules published in the Federal Register by the executive departments and...

  18. Automatic coding of online collaboration protocols

    NARCIS (Netherlands)

    Erkens, Gijsbert; Janssen, J.J.H.M.

    2006-01-01

    An automatic coding procedure is described to determine the communicative functions of messages in chat discussions. Five main communicative functions are distinguished: argumentative (indicating a line of argumentation or reasoning), responsive (e.g., confirmations, denials, and answers),

  19. [Student nurses and the code of ethics].

    Science.gov (United States)

    Trolliet, Julie

    2017-09-01

    Student nurses, just like all practising professionals, are expected to be aware of and to respect the code of ethics governing their profession. Since the publication of this code, actions to raise awareness of it and explain it to all the relevant players have been put in place. The French National Federation of Student Nurses decided to survey future professionals regarding this new text. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  20. [Promoting the code of ethics for nurses].

    Science.gov (United States)

    Chamboredon, Patrick; Lecointre, Brigitte

    2017-09-01

    The publication of the code of ethics for nurses requires the French National Order of Nurses' structures to undertake initiatives with the aim of promoting it as well as implementing the public service missions which have now been attributed to the Order. Each regional and departmental body has its role to play in raising awareness of this code and its application in the field. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  1. Joint design of QC-LDPC codes for coded cooperation system with joint iterative decoding

    Science.gov (United States)

    Zhang, Shunwai; Yang, Fengfan; Tang, Lei; Ejaz, Saqib; Luo, Lin; Maharaj, B. T.

    2016-03-01

    In this paper, we investigate joint design of quasi-cyclic low-density-parity-check (QC-LDPC) codes for coded cooperation system with joint iterative decoding in the destination. First, QC-LDPC codes based on the base matrix and exponent matrix are introduced, and then we describe two types of girth-4 cycles in QC-LDPC codes employed by the source and relay. In the equivalent parity-check matrix corresponding to the jointly designed QC-LDPC codes employed by the source and relay, all girth-4 cycles including both type I and type II are cancelled. Theoretical analysis and numerical simulations show that the jointly designed QC-LDPC coded cooperation well combines cooperation gain and channel coding gain, and outperforms the coded non-cooperation under the same conditions. Furthermore, the bit error rate performance of the coded cooperation employing jointly designed QC-LDPC codes is better than those of random LDPC codes and separately designed QC-LDPC codes over AWGN channels.

  2. Module description of TOKAMAK equilibrium code MEUDAS

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Masaei; Hayashi, Nobuhiko; Matsumoto, Taro; Ozeki, Takahisa [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

    2002-01-01

    The analysis of an axisymmetric MHD equilibrium serves as a foundation of TOKAMAK researches, such as a design of devices and theoretical research, the analysis of experiment result. For this reason, also in JAERI, an efficient MHD analysis code has been developed from start of TOKAMAK research. The free boundary equilibrium code ''MEUDAS'' which uses both the DCR method (Double-Cyclic-Reduction Method) and a Green's function can specify the pressure and the current distribution arbitrarily, and has been applied to the analysis of a broad physical subject as a code having rapidity and high precision. Also the MHD convergence calculation technique in ''MEUDAS'' has been built into various newly developed codes. This report explains in detail each module in ''MEUDAS'' for performing convergence calculation in solving the MHD equilibrium. (author)

  3. Module description of TOKAMAK equilibrium code MEUDAS

    International Nuclear Information System (INIS)

    Suzuki, Masaei; Hayashi, Nobuhiko; Matsumoto, Taro; Ozeki, Takahisa

    2002-01-01

    The analysis of an axisymmetric MHD equilibrium serves as a foundation of TOKAMAK researches, such as a design of devices and theoretical research, the analysis of experiment result. For this reason, also in JAERI, an efficient MHD analysis code has been developed from start of TOKAMAK research. The free boundary equilibrium code ''MEUDAS'' which uses both the DCR method (Double-Cyclic-Reduction Method) and a Green's function can specify the pressure and the current distribution arbitrarily, and has been applied to the analysis of a broad physical subject as a code having rapidity and high precision. Also the MHD convergence calculation technique in ''MEUDAS'' has been built into various newly developed codes. This report explains in detail each module in ''MEUDAS'' for performing convergence calculation in solving the MHD equilibrium. (author)

  4. User's manual of Tokamak Simulation Code

    International Nuclear Information System (INIS)

    Nakamura, Yukiharu; Nishino, Tooru; Tsunematsu, Toshihide; Sugihara, Masayoshi.

    1992-12-01

    User's manual for use of Tokamak Simulation Code (TSC), which simulates the time-evolutional process of deformable motion of axisymmetric toroidal plasma, is summarized. For the use at JAERI computer system, the TSC is linked with the data management system GAEA. This manual is forcused on the procedure for the input and output by using the GAEA system. Model equations to give axisymmetric motion, outline of code system, optimal method to get the well converged solution are also described. (author)

  5. Catalogue of nuclear fusion codes - 1976

    International Nuclear Information System (INIS)

    1976-10-01

    A catalogue is presented of the computer codes in nuclear fusion research developed by JAERI, Division of Thermonuclear Fusion Research and Division of Large Tokamak Development in particular. It contains a total of about 100 codes under the categories: Atomic Process, Data Handling, Experimental Data Processing, Engineering, Input and Output, Special Languages and Their Application, Mathematical Programming, Miscellaneous, Numerical Analysis, Nuclear Physics, Plasma Physics and Fusion Research, Plasma Simulation and Numerical Technique, Reactor Design, Solid State Physics, Statistics, and System Program. (auth.)

  6. Coding of Depth Images for 3DTV

    DEFF Research Database (Denmark)

    Zamarin, Marco; Forchhammer, Søren

    In this short paper a brief overview of the topic of coding and compression of depth images for multi-view image and video coding is provided. Depth images represent a convenient way to describe distances in the 3D scene, useful for 3D video processing purposes. Standard approaches...... for the compression of depth images are described and compared against some recent specialized algorithms able to achieve higher compression performances. Future research directions close the paper....

  7. The amendment of the Labour Code

    Directory of Open Access Journals (Sweden)

    Jana Mervartová

    2012-01-01

    Full Text Available The amendment of the Labour Code, No. 365/2011 Coll., effective as from 1st January 2012, brings some of fundamental changes in labour law. The amendment regulates relation between the Labour Code and the Civil Code; and is also formulates principles of labour law relations newly. The basic period by fixed-term contract of employment is extended and also frequency its conclusion is limited. The length of trial period and the amount of redundancy payment are graduated. An earlier legislative regulation which an employee is temporarily assign to work for different employer has been returned. The number of hours by agreement to perform work is increased. The monetary compensation by competitive clause is reduced. The other changes are realised in part of collective labour law. The authoress of article notifies of the most important changes. She compares new changes of the Labour Code and former legal system and she also evaluates their advantages and disadvantages. The main objective of changes ensures labour law relations to be more flexible. And it should motivate creation of new jobs opening by employers. Amended provisions are aimed to reduction expenses of employers under the reform of the public finances. Also changes are expected in the Labour Code in connection with the further new Civil Code.

  8. Development of code PRETOR for stellarator simulation

    International Nuclear Information System (INIS)

    Dies, J.; Fontanet, J.; Fontdecaba, J.M.; Castejon, F.; Alejandre, C.

    1998-01-01

    The Department de Fisica i Enginyeria Nuclear (DFEN) of the UPC has some experience in the development of the transport code PRETOR. This code has been validated with shots of DIII-D, JET and TFTR, it has also been used in the simulation of operational scenarios of ITER fast burnt termination. Recently, the association EURATOM-CIEMAT has started the operation of the TJ-II stellarator. Due to the need of validating the results given by others transport codes applied to stellarators and because all of them made some approximations, as a averaging magnitudes in each magnetic surface, it was thought suitable to adapt the PRETOR code to devices without axial symmetry, like stellarators, which is very suitable for the specific needs of the study of TJ-II. Several modifications are required in PRETOR; the main concerns to the models of: magnetic equilibrium, geometry and transport of energy and particles. In order to solve the complex magnetic equilibrium geometry the powerful numerical code VMEC has been used. This code gives the magnetic surface shape as a Fourier series in terms of the harmonics (m,n). Most of the geometric magnitudes are also obtained from the VMEC results file. The energy and particle transport models will be replaced by other phenomenological models that are better adapted to stellarator simulation. Using the proposed models, it is pretended to reproduce experimental data available from present stellarators, given especial attention to the TJ-II of the association EURATOM-CIEMAT. (Author)

  9. Code generation of RHIC accelerator device objects

    International Nuclear Information System (INIS)

    Olsen, R.H.; Hoff, L.; Clifford, T.

    1995-01-01

    A RHIC Accelerator Device Object is an abstraction which provides a software view of a collection of collider control points known as parameters. A grammar has been defined which allows these parameters, along with code describing methods for acquiring and modifying them, to be specified efficiently in compact definition files. These definition files are processed to produce C++ source code. This source code is compiled to produce an object file which can be loaded into a front end computer. Each loaded object serves as an Accelerator Device Object class definition. The collider will be controlled by applications which set and get the parameters in instances of these classes using a suite of interface routines. Significant features of the grammar are described with details about the generated C++ code

  10. Survey of Codes Employing Nuclear Damage Assessment

    Science.gov (United States)

    1977-10-01

    surveyed codes were com- DO 73Mu 1473 ETN OF 1NOVSSSOLETE UNCLASSIFIED 1 SECURITY CLASSIFICATION OF THIS f AGE (Wh*11 Date Efntered)S<>-~C. I UNCLASSIFIED...level and above) TALLEY/TOTEM not nuclear TARTARUS too highly aggregated (battalion level and above) UNICORN highly aggregated force allocation code...vulnerability data can bq input by the user as he receives them, and there is the abil ’ity to replay any situation using hindsight. The age of target

  11. Uncertainty analysis of the FRAP code

    International Nuclear Information System (INIS)

    Peck, S.O.

    1978-01-01

    A user oriented, automated uncertainty analysis capability has been built into the FRAP code (Fuel Rod Analysis Program) and applied to a PWR fuel rod undergoing a LOCA. The method of uncertainty analysis is the Response Surface Method (RSM). (author)

  12. A Comparative Study of RCS Computation Codes

    National Research Council Canada - National Science Library

    Tong, Chia T; Wah, Ang T; Hwee, Lim K; Philip, Ou S; Heng, Yar K; Rowse, David; Amos, Matthew; Keen, Alan; Pegg, Neil; Thain, Andrew

    2005-01-01

    .... The first test object is a (fictitious) generic missile. It provides a test problem for benchmarking the performance of CEM codes on geometries containing real world deficiencies, such as thin bodies and sharp corners...

  13. 17 CFR 229.406 - (Item 406) Code of ethics.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false (Item 406) Code of ethics. 229... 406) Code of ethics. (a) Disclose whether the registrant has adopted a code of ethics that applies to... code of ethics, explain why it has not done so. (b) For purposes of this Item 406, the term code of...

  14. Benchmark studies of BOUT++ code and TPSMBI code on neutral transport during SMBI

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Y.H. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); University of Science and Technology of China, Hefei 230026 (China); Center for Magnetic Fusion Theory, Chinese Academy of Sciences, Hefei 230031 (China); Wang, Z.H., E-mail: zhwang@swip.ac.cn [Southwestern Institute of Physics, Chengdu 610041 (China); Guo, W., E-mail: wfguo@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Center for Magnetic Fusion Theory, Chinese Academy of Sciences, Hefei 230031 (China); Ren, Q.L. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Sun, A.P.; Xu, M.; Wang, A.K. [Southwestern Institute of Physics, Chengdu 610041 (China); Xiang, N. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Center for Magnetic Fusion Theory, Chinese Academy of Sciences, Hefei 230031 (China)

    2017-06-09

    SMBI (supersonic molecule beam injection) plays an important role in tokamak plasma fuelling, density control and ELM mitigation in magnetic confinement plasma physics, which has been widely used in many tokamaks. The trans-neut module of BOUT++ code is the only large-scale parallel 3D fluid code used to simulate the SMBI fueling process, while the TPSMBI (transport of supersonic molecule beam injection) code is a recent developed 1D fluid code of SMBI. In order to find a method to increase SMBI fueling efficiency in H-mode plasma, especially for ITER, it is significant to first verify the codes. The benchmark study between the trans-neut module of BOUT++ code and the TPSMBI code on radial transport dynamics of neutral during SMBI has been first successfully achieved in both slab and cylindrical coordinates. The simulation results from the trans-neut module of BOUT++ code and TPSMBI code are consistent very well with each other. Different upwind schemes have been compared to deal with the sharp gradient front region during the inward propagation of SMBI for the code stability. The influence of the WENO3 (weighted essentially non-oscillatory) and the third order upwind schemes on the benchmark results has also been discussed. - Highlights: • A 1D model of SMBI has developed. • Benchmarks of BOUT++ and TPSMBI codes have first been finished. • The influence of the WENO3 and the third order upwind schemes on the benchmark results has also been discussed.

  15. Improvement of MARS code reflood model

    International Nuclear Information System (INIS)

    Hwang, Moonkyu; Chung, Bub-Dong

    2011-01-01

    A specifically designed heat transfer model for the reflood process which normally occurs at low flow and low pressure was originally incorporated in the MARS code. The model is essentially identical to that of the RELAP5/MOD3.3 code. The model, however, is known to have under-estimated the peak cladding temperature (PCT) with earlier turn-over. In this study, the original MARS code reflood model is improved. Based on the extensive sensitivity studies for both hydraulic and wall heat transfer models, it is found that the dispersed flow film boiling (DFFB) wall heat transfer is the most influential process determining the PCT, whereas the interfacial drag model most affects the quenching time through the liquid carryover phenomenon. The model proposed by Bajorek and Young is incorporated for the DFFB wall heat transfer. Both space grid and droplet enhancement models are incorporated. Inverted annular film boiling (IAFB) is modeled by using the original PSI model of the code. The flow transition between the DFFB and IABF, is modeled using the TRACE code interpolation. A gas velocity threshold is also added to limit the top-down quenching effect. Assessment calculations are performed for the original and modified MARS codes for the Flecht-Seaset test and RBHT test. Improvements are observed in terms of the PCT and quenching time predictions in the Flecht-Seaset assessment. In case of the RBHT assessment, the improvement over the original MARS code is found marginal. A space grid effect, however, is clearly seen from the modified version of the MARS code. (author)

  16. Purifying selection acts on coding and non-coding sequences of paralogous genes in Arabidopsis thaliana.

    Science.gov (United States)

    Hoffmann, Robert D; Palmgren, Michael

    2016-06-13

    Whole-genome duplications in the ancestors of many diverse species provided the genetic material for evolutionary novelty. Several models explain the retention of paralogous genes. However, how these models are reflected in the evolution of coding and non-coding sequences of paralogous genes is unknown. Here, we analyzed the coding and non-coding sequences of paralogous genes in Arabidopsis thaliana and compared these sequences with those of orthologous genes in Arabidopsis lyrata. Paralogs with lower expression than their duplicate had more nonsynonymous substitutions, were more likely to fractionate, and exhibited less similar expression patterns with their orthologs in the other species. Also, lower-expressed genes had greater tissue specificity. Orthologous conserved non-coding sequences in the promoters, introns, and 3' untranslated regions were less abundant at lower-expressed genes compared to their higher-expressed paralogs. A gene ontology (GO) term enrichment analysis showed that paralogs with similar expression levels were enriched in GO terms related to ribosomes, whereas paralogs with different expression levels were enriched in terms associated with stress responses. Loss of conserved non-coding sequences in one gene of a paralogous gene pair correlates with reduced expression levels that are more tissue specific. Together with increased mutation rates in the coding sequences, this suggests that similar forces of purifying selection act on coding and non-coding sequences. We propose that coding and non-coding sequences evolve concurrently following gene duplication.

  17. Cracking the code: the accuracy of coding shoulder procedures and the repercussions.

    Science.gov (United States)

    Clement, N D; Murray, I R; Nie, Y X; McBirnie, J M

    2013-05-01

    Coding of patients' diagnosis and surgical procedures is subject to error levels of up to 40% with consequences on distribution of resources and financial recompense. Our aim was to explore and address reasons behind coding errors of shoulder diagnosis and surgical procedures and to evaluate a potential solution. A retrospective review of 100 patients who had undergone surgery was carried out. Coding errors were identified and the reasons explored. A coding proforma was designed to address these errors and was prospectively evaluated for 100 patients. The financial implications were also considered. Retrospective analysis revealed the correct primary diagnosis was assigned in 54 patients (54%) had an entirely correct diagnosis, and only 7 (7%) patients had a correct procedure code assigned. Coders identified indistinct clinical notes and poor clarity of procedure codes as reasons for errors. The proforma was significantly more likely to assign the correct diagnosis (odds ratio 18.2, p code (odds ratio 310.0, p coding department. High error levels for coding are due to misinterpretation of notes and ambiguity of procedure codes. This can be addressed by allowing surgeons to assign the diagnosis and procedure using a simplified list that is passed directly to coding.

  18. Development of Coolant Radioactivity Interpretation Code

    International Nuclear Information System (INIS)

    Kim, Kiyoung; Jung, Youngsuk; Kim, Kyounghyun; Kim, Jangwook

    2013-01-01

    In Korea, the coolant radioactivity analysis has been performed by using the computer codes of foreign companies such as CADE (Westinghouse), IODYNE and CESIUM (ABB-CE). However, these computer codes are too conservative and have involved considerable errors. Furthermore, since these codes are DOS-based program, their easy operability is not satisfactory. Therefore it is required development of an enhanced analysis algorithm applying an analytical method reflecting the change of operational environments of domestic nuclear power plants and a fuel failure evaluation software considering user' conveniences. We have developed a nuclear fuel failure evaluation code able to estimate the number of failed fuel rods and the burn-up of failed fuels during nuclear power plant operation cycle. A Coolant Radio-activity Interpretation Code (CRIC) for LWR has been developed as the output of the project 'Development of Fuel Reliability Enhanced Technique' organized by Korea Institute of Energy Technology Evaluation and Planning (KETEP). The CRIC is Windows based-software able to evaluate the number of failed fuel rods and the burn-up of failed fuel region by analyzing coolant radioactivity of LWR in operation. The CRIC is based on the model of fission products release commonly known as 'three region model' (pellet region, gap region, and coolant region), and we are verifying the CRIC results based on the cases of domestic fuel failures. CRIC users are able to estimate the number of failed fuel rods, burn-up and regions of failed fuel considered enrichment and power distribution of fuel region by using operational cycle data, coolant activity data, fuel loading pattern, Cs-134/Cs-137 ratio according to burn-up and U-235 enrichment provided in the code. Due to development of the CRIC, it is secured own unique fuel failure evaluation code. And, it is expected to have the following significant meaning. This is that the code reflecting a proprietary technique for quantitatively

  19. Performance analysis of WS-EWC coded optical CDMA networks with/without LDPC codes

    Science.gov (United States)

    Huang, Chun-Ming; Huang, Jen-Fa; Yang, Chao-Chin

    2010-10-01

    One extended Welch-Costas (EWC) code family for the wavelength-division-multiplexing/spectral-amplitude coding (WDM/SAC; WS) optical code-division multiple-access (OCDMA) networks is proposed. This system has a superior performance as compared to the previous modified quadratic congruence (MQC) coded OCDMA networks. However, since the performance of such a network is unsatisfactory when the data bit rate is higher, one class of quasi-cyclic low-density parity-check (QC-LDPC) code is adopted to improve that. Simulation results show that the performance of the high-speed WS-EWC coded OCDMA network can be greatly improved by using the LDPC codes.

  20. The history and development of nonlinear stellar pulsation codes

    International Nuclear Information System (INIS)

    Davis, C.G.

    1987-01-01

    This review is limited to the history and development of nonlinear stellar pulsation codes and methods. The narrative includes examples of practical interest in the application of these numerical methods to problems in stellar pulsation such as Cepheid mass discrepancy, the delineation of the RR Lyrae instability strip, and the question of the development of double-mode pulsation as observed in Cepheids, RR Lyrae and other variable stars. 15 refs

  1. Genetic Code Analysis Toolkit: A novel tool to explore the coding properties of the genetic code and DNA sequences

    Science.gov (United States)

    Kraljić, K.; Strüngmann, L.; Fimmel, E.; Gumbel, M.

    2018-01-01

    The genetic code is degenerated and it is assumed that redundancy provides error detection and correction mechanisms in the translation process. However, the biological meaning of the code's structure is still under current research. This paper presents a Genetic Code Analysis Toolkit (GCAT) which provides workflows and algorithms for the analysis of the structure of nucleotide sequences. In particular, sets or sequences of codons can be transformed and tested for circularity, comma-freeness, dichotomic partitions and others. GCAT comes with a fertile editor custom-built to work with the genetic code and a batch mode for multi-sequence processing. With the ability to read FASTA files or load sequences from GenBank, the tool can be used for the mathematical and statistical analysis of existing sequence data. GCAT is Java-based and provides a plug-in concept for extensibility. Availability: Open source Homepage:http://www.gcat.bio/

  2. Ethical Challenges in a Complex World: Highlights of the 2005 ACA Code of Ethics

    Science.gov (United States)

    Kocet, Michael M.

    2006-01-01

    Being an effective counselor includes having knowledge of and the ability to integrate a code of ethics into one's professional practice. This article addresses some of the highlights of the changes in the 2005 ACA [American Counseling Association] Code of Ethics such as end-of-life issues, boundaries and relationships, and multicultural and…

  3. Rate-adaptive BCH coding for Slepian-Wolf coding of highly correlated sources

    DEFF Research Database (Denmark)

    Forchhammer, Søren; Salmistraro, Matteo; Larsen, Knud J.

    2012-01-01

    This paper considers using BCH codes for distributed source coding using feedback. The focus is on coding using short block lengths for a binary source, X, having a high correlation between each symbol to be coded and a side information, Y, such that the marginal probability of each symbol, Xi in X......, given Y is highly skewed. In the analysis, noiseless feedback and noiseless communication are assumed. A rate-adaptive BCH code is presented and applied to distributed source coding. Simulation results for a fixed error probability show that rate-adaptive BCH achieves better performance than LDPCA (Low......-Density Parity-Check Accumulate) codes for high correlation between source symbols and the side information....

  4. The status of Korean nuclear codes and standards

    International Nuclear Information System (INIS)

    Namha Kim; Jong-Hae Kim

    2005-01-01

    Korea Electric Power Industry Code (KEPIC), a set of integrated standards applicable to the design, construction and operation of electric power facilities including nuclear power plants, has been developed on the basis of referring to the prevailing U.S. codes and standards which had been applied to the electric power facilities in Korea. Being the developing and managing organization of KEPIC, Korea Electric Association (KEA) published its first edition in 1995, the second in 200,0 and is expected to publish the 2005 edition. KEPIC was applied to the construction of Ulchin Nuclear Units 5 and 6 in 1997, and will be applicable to the construction of forthcoming nuclear power plants in Korea. Along with the effectuation of the Agreement on Technical Barriers to Trade (TBT) in 1995, the international trend related to codes and standards is changing rapidly. The KEA is, therefore, making its utmost efforts so as for KEPIC to keep abreast with the changing environment in international arena. KEA notified ISO/IEC Information Centre of its acceptance of the Code of Good Practice in the Agreement on TBT. The 2005 KEPIC edition will be retrofitted according to the ISO/IEC Guide 21- Adoption of International Standards as regional or national standards. KEA's efforts will help KEPIC correspond with international standards such as ISO/IEC standards, and internationally recognized standards such as ASME codes and standards. (authors)

  5. Benchmark calculation of subchannel analysis codes

    International Nuclear Information System (INIS)

    1996-02-01

    In order to evaluate the analysis capabilities of various subchannel codes used in thermal-hydraulic design of light water reactors, benchmark calculations were performed. The selected benchmark problems and major findings obtained by the calculations were as follows: (1)As for single-phase flow mixing experiments between two channels, the calculated results of water temperature distribution along the flow direction were agreed with experimental results by tuning turbulent mixing coefficients properly. However, the effect of gap width observed in the experiments could not be predicted by the subchannel codes. (2)As for two-phase flow mixing experiments between two channels, in high water flow rate cases, the calculated distributions of air and water flows in each channel were well agreed with the experimental results. In low water flow cases, on the other hand, the air mixing rates were underestimated. (3)As for two-phase flow mixing experiments among multi-channels, the calculated mass velocities at channel exit under steady-state condition were agreed with experimental values within about 10%. However, the predictive errors of exit qualities were as high as 30%. (4)As for critical heat flux(CHF) experiments, two different results were obtained. A code indicated that the calculated CHF's using KfK or EPRI correlations were well agreed with the experimental results, while another code suggested that the CHF's were well predicted by using WSC-2 correlation or Weisman-Pei mechanistic model. (5)As for droplets entrainment and deposition experiments, it was indicated that the predictive capability was significantly increased by improving correlations. On the other hand, a remarkable discrepancy between codes was observed. That is, a code underestimated the droplet flow rate and overestimated the liquid film flow rate in high quality cases, while another code overestimated the droplet flow rate and underestimated the liquid film flow rate in low quality cases. (J.P.N.)

  6. Development of the vacuum system pressure responce analysis code PRAC

    International Nuclear Information System (INIS)

    Horie, Tomoyoshi; Kawasaki, Kouzou; Noshiroya, Shyoji; Koizumi, Jun-ichi.

    1985-03-01

    In this report, we show the method and numerical results of the vacuum system pressure responce analysis code. Since fusion apparatus is made up of many vacuum components, it is required to analyze pressure responce at any points of the system when vacuum system is designed or evaluated. For that purpose evaluating by theoretical solution is insufficient. Numerical analysis procedure such as finite difference method is usefull. In the PRAC code (Pressure Responce Analysis Code), pressure responce is obtained solving derivative equations which is obtained from the equilibrium relation of throughputs and contain the time derivative of pressure. As it considers both molecular and viscous flows, the coefficients of the equation depend on the pressure and the equations become non-linear. This non-linearity is treated as piece-wise linear within each time step. Verification of the code is performed for the simple problems. The agreement between numerical and theoretical solutions is good. To compare with the measured results, complicated model of gas puffing system is analyzed. The agreement is well for practical use. This code will be a useful analytical tool for designing and evaluating vacuum systems such as fusion apparatus. (author)

  7. Status of the ASTEC integral code

    International Nuclear Information System (INIS)

    Van Dorsselaere, J.P.; Jacq, F.; Allelein, H.J.

    2000-01-01

    The ASTEC (Accident Source Term Evaluation Code) integrated code is developed since 1997 in close collaboration by IPSN and GRS to predict an entire LWR severe accident sequence from the initiating event up to Fission Product (FP) release out of the containment. The applications of such a code are source term determination studies, scenario evaluations, accident management studies and Probabilistic Safety Assessment level 2 (PSA-2) studies. The version V0 of ASTEC is based on the RCS modules of the ESCADRE integrated code (IPSN) and on the upgraded RALOC and FIPLOC codes (GRS) for containment thermalhydraulics and aerosol behaviour. The latest version V0.2 includes the general feed-back from the overall validation performed in 1998 (25 separate-effect experiments, PHEBUS.FP FPT1 integrated experiment), some modelling improvements (i.e. silver-iodine reactions in the containment sump), and the implementation of the main safety systems for Severe Accident Management. Several reactor-applications are under way on French and German PWR, and on VVER-1000, all with a multi-compartment configuration of the containment. The total IPSN-GRS manpower involved in ASTEC project is today about 20 men/year. The main evolution of the next version V1, foreseen end of 2001, concerns the integration of the front-end phase and the improvement of the in-vessel degradation late-phase modelling. (author)

  8. Modeling report of DYMOND code (DUPIC version)

    International Nuclear Information System (INIS)

    Park, Joo Hwan; Yacout, Abdellatif M.

    2003-04-01

    The DYMOND code employs the ITHINK dynamic modeling platform to assess the 100-year dynamic evolution scenarios for postulated global nuclear energy parks. Firstly, DYMOND code has been developed by ANL(Argonne National Laboratory) to perform the fuel cycle analysis of LWR once-through and LWR-FBR mixed plant. Since the extensive application of DYMOND code has been requested, the first version of DYMOND has been modified to adapt the DUPIC, MSR and RTF fuel cycle. DYMOND code is composed of three parts; the source language platform, input supply and output. But those platforms are not clearly distinguished. This report described all the equations which were modeled in the modified DYMOND code (which is called as DYMOND-DUPIC version). It divided into five parts;Part A deals model in reactor history which is included amount of the requested fuels and spent fuels. Part B aims to describe model of fuel cycle about fuel flow from the beginning to the end of fuel cycle. Part C is for model in re-processing which is included recovery of burned uranium, plutonium, minor actinide and fission product as well as the amount of spent fuels in storage and disposal. Part D is for model in other fuel cycle which is considered the thorium fuel cycle for MSR and RTF reactor. Part E is for model in economics. This part gives all the information of cost such as uranium mining cost, reactor operating cost, fuel cost etc

  9. Modeling report of DYMOND code (DUPIC version)

    Energy Technology Data Exchange (ETDEWEB)

    Park, Joo Hwan [KAERI, Taejon (Korea, Republic of); Yacout, Abdellatif M [Argonne National Laboratory, Ilinois (United States)

    2003-04-01

    The DYMOND code employs the ITHINK dynamic modeling platform to assess the 100-year dynamic evolution scenarios for postulated global nuclear energy parks. Firstly, DYMOND code has been developed by ANL(Argonne National Laboratory) to perform the fuel cycle analysis of LWR once-through and LWR-FBR mixed plant. Since the extensive application of DYMOND code has been requested, the first version of DYMOND has been modified to adapt the DUPIC, MSR and RTF fuel cycle. DYMOND code is composed of three parts; the source language platform, input supply and output. But those platforms are not clearly distinguished. This report described all the equations which were modeled in the modified DYMOND code (which is called as DYMOND-DUPIC version). It divided into five parts;Part A deals model in reactor history which is included amount of the requested fuels and spent fuels. Part B aims to describe model of fuel cycle about fuel flow from the beginning to the end of fuel cycle. Part C is for model in re-processing which is included recovery of burned uranium, plutonium, minor actinide and fission product as well as the amount of spent fuels in storage and disposal. Part D is for model in other fuel cycle which is considered the thorium fuel cycle for MSR and RTF reactor. Part E is for model in economics. This part gives all the information of cost such as uranium mining cost, reactor operating cost, fuel cost etc.

  10. Determination of national midwifery ethical values and ethical codes: in Turkey.

    Science.gov (United States)

    Ergin, Ayla; Özcan, Müesser; Acar, Zeynep; Ersoy, Nermin; Karahan, Nazan

    2013-11-01

    It is important to define and practice ethical rules and codes for professionalisation. Several national and international associations have determined midwifery ethical codes. In Turkey, ethical rules and codes that would facilitate midwifery becoming professionalised have not yet been determined. This study was planned to contribute to the professionalisation of midwifery by determining national ethical values and codes. A total of 1067 Turkish midwives completed the survey. The most prevalent values of Turkish midwives were care for mother-child health, responsibility and professional adequacy. The preferred professional codes chosen by Turkish midwives were absence of conflicts of interest, respect for privacy, avoidance of deception, reporting of faulty practices, consideration of mothers and newborns as separate beings and prevention of harm. In conclusion, cultural values, beliefs and expectations of society cannot be underestimated, although the international professional values and codes of ethics contribute significantly to professionalisation of the midwifery profession.

  11. Development of chemical equilibrium analysis code 'CHEEQ'

    International Nuclear Information System (INIS)

    Nagai, Shuichiro

    2006-08-01

    'CHEEQ' code which calculates the partial pressure and the mass of the system consisting of ideal gas and pure condensed phase compounds, was developed. Characteristics of 'CHEEQ' code are as follows. All the chemical equilibrium equations were described by the formation reactions from the mono-atomic gases in order to simplify the code structure and input preparation. Chemical equilibrium conditions, Σν i μ i =0 for the gaseous compounds and precipitated condensed phase compounds and Σν i μ i > 0 for the non-precipitated condensed phase compounds, were applied. Where, ν i and μ i are stoichiometric coefficient and chemical potential of component i. Virtual solid model was introduced to perform the calculation of constant partial pressure condition. 'CHEEQ' was consisted of following 3 parts, (1) analysis code, zc132. f. (2) thermodynamic data base, zmdb01 and (3) input data file, zindb. 'CHEEQ' code can calculate the system which consisted of elements (max.20), condensed phase compounds (max.100) and gaseous compounds. (max.200). Thermodynamic data base, zmdb01 contains about 1000 elements and compounds, and 200 of them were Actinide elements and their compounds. This report describes the basic equations, the outline of the solution procedure and instructions to prepare the input data and to evaluate the calculation results. (author)

  12. Former Yugoslav Republic of Macedonia; Report on Observance of Standards and Codes: Fiscal Transparency Module

    OpenAIRE

    International Monetary Fund

    2006-01-01

    This report summarizes the Observance of Standards and Codes on Fiscal Transparency for the Former Yugoslav Republic of Macedonia. It provides an assessment of fiscal transparency practices in the Former Yugoslav Republic (FYR) of Macedonia in relation to the requirements of the IMF Code of Good Practices on Fiscal Transparency based on discussions with the authorities and other organizations and through a fiscal transparency questionnaire. It also provides recommendations for improving fisca...

  13. Evaluation of the FRAPCON-3 Computer Code

    International Nuclear Information System (INIS)

    Jernkvist, Lars Olof; Massih, Ali

    2002-03-01

    The FRAPCON-3 computer code has been evaluated with respect to its applicability, modeling capability, user friendliness, source code structure and supporting experimental database. The code is intended for thermo-mechanical analyses of light water reactor nuclear fuel rods under steady-state operational conditions and moderate power excursions. It is applicable to both boiling- and pressurized water reactor fuel rods with UO 2 fuel, ranging up to about 65 MWd/kg U in rod average burnup. The models and numerical methods in FRAPCON-3 are relatively simple, which makes the code transparent and also fairly easy to modify and extend for the user. The fundamental equations for heat transfer, structural analysis and fuel fission gas release are solved in one-dimensional (radial) and stationary (time-independent) form, and interaction between axial segments of the rod is confined to calculations of coolant axial flow and rod internal gas pressure. The code is fairly easy to use; fuel rod design data and time histories of fuel rod power and coolant inlet conditions are input via a single text file, and the corresponding calculated variation with time of important fuel rod parameters are printed to a single output file in textual form. The results can also be presented in graphical form through an interface to the general graphics program xmgr. FRAPCON-3 also provides the possibility to export calculated results to the transient fuel rod analysis code FRAPTRAN, where the data can be used as burnup-dependent initial conditions to a postulated transient. Most of the source code to FRAPCON-3 is written in Fortran-IV, which is an archaic, non-standard dialect of the Fortran programming language. Since Fortran-IV is not accepted by all compilers for the latest standard of the language, Fortran-95, there is a risk that the source code must be partly rewritten in the future. Documentation of the code comprises (i) a general code description, which briefly presents models

  14. Evaluation of the FRAPCON-3 Computer Code

    Energy Technology Data Exchange (ETDEWEB)

    Jernkvist, Lars Olof; Massih, Ali [Quantum Technologies AB, Uppsala (Sweden)

    2002-03-01

    The FRAPCON-3 computer code has been evaluated with respect to its applicability, modeling capability, user friendliness, source code structure and supporting experimental database. The code is intended for thermo-mechanical analyses of light water reactor nuclear fuel rods under steady-state operational conditions and moderate power excursions. It is applicable to both boiling- and pressurized water reactor fuel rods with UO{sub 2} fuel, ranging up to about 65 MWd/kg U in rod average burnup. The models and numerical methods in FRAPCON-3 are relatively simple, which makes the code transparent and also fairly easy to modify and extend for the user. The fundamental equations for heat transfer, structural analysis and fuel fission gas release are solved in one-dimensional (radial) and stationary (time-independent) form, and interaction between axial segments of the rod is confined to calculations of coolant axial flow and rod internal gas pressure. The code is fairly easy to use; fuel rod design data and time histories of fuel rod power and coolant inlet conditions are input via a single text file, and the corresponding calculated variation with time of important fuel rod parameters are printed to a single output file in textual form. The results can also be presented in graphical form through an interface to the general graphics program xmgr. FRAPCON-3 also provides the possibility to export calculated results to the transient fuel rod analysis code FRAPTRAN, where the data can be used as burnup-dependent initial conditions to a postulated transient. Most of the source code to FRAPCON-3 is written in Fortran-IV, which is an archaic, non-standard dialect of the Fortran programming language. Since Fortran-IV is not accepted by all compilers for the latest standard of the language, Fortran-95, there is a risk that the source code must be partly rewritten in the future. Documentation of the code comprises (i) a general code description, which briefly presents models

  15. Sparsity in Linear Predictive Coding of Speech

    DEFF Research Database (Denmark)

    Giacobello, Daniele

    of the effectiveness of their application in audio processing. The second part of the thesis deals with introducing sparsity directly in the linear prediction analysis-by-synthesis (LPAS) speech coding paradigm. We first propose a novel near-optimal method to look for a sparse approximate excitation using a compressed...... one with direct applications to coding but also consistent with the speech production model of voiced speech, where the excitation of the all-pole filter can be modeled as an impulse train, i.e., a sparse sequence. Introducing sparsity in the LP framework will also bring to de- velop the concept...... sensing formulation. Furthermore, we define a novel re-estimation procedure to adapt the predictor coefficients to the given sparse excitation, balancing the two representations in the context of speech coding. Finally, the advantages of the compact parametric representation of a segment of speech, given...

  16. Development of 2-d cfd code

    International Nuclear Information System (INIS)

    Mirza, S.A.

    1999-01-01

    In the present study, a two-dimensional computer code has been developed in FORTRAN using CFD technique, which is basically a numerical scheme. This computer code solves the Navier Stokes equations and continuity equation to find out the velocity and pressure fields within a given domain. This analysis has been done for the developed within a square cavity driven by the upper wall which has become a bench mark for testing and comparing the newly developed numerical schemes. Before to handle this task, different one-dimensional cases have been studied by CFD technique and their FORTRAN programs written. The cases studied are Couette flow, Poiseuille flow with and without using symmetric boundary condition. Finally a comparison between CFD results and analytical results has also been made. For the cavity flow the results from the developed code have been obtained for different Reynolds numbers which are finally presented in the form of velocity vectors. The comparison of the developed code results have been made with the results obtained from the share ware version of a commercially available code for Reynolds number of 10.0. The disagreement in the results quantitatively and qualitatively at some grid points of the calculation domain have been discussed and future recommendations in this regard have also been made. (author)

  17. Validation of the reactor dynamics code TRAB

    International Nuclear Information System (INIS)

    Raety, H.; Kyrki-Rajamaeki, R.; Rajamaeki, M.

    1991-05-01

    The one-dimensional reactor dynamics code TRAB (Transient Analysis code for BWRs) developed at VTT was originally designed for BWR analyses, but it can in its present version be used for various modelling purposes. The core model of TRAB can be used separately for LWR calculations. For PWR modelling the core model of TRAB has been coupled to circuit model SMABRE to form the SMATRA code. The versatile modelling capabilities of TRAB have been utilized also in analyses of e.g. the heating reactor SECURE and the RBMK-type reactor (Chernobyl). The report summarizes the extensive validation of TRAB. TRAB has been validated with benchmark problems, comparative calculations against independent analyses, analyses of start-up experiments of nuclear power plants and real plant transients. Comparative RBMES type reactor calculations have been made against Soviet simulations and the initial power excursion of the Chernobyl reactor accident has also been calculated with TRAB

  18. Code ATOM for calculation of atomic characteristics

    International Nuclear Information System (INIS)

    Vainshtein, L.A.

    1990-01-01

    In applying atomic physics to problems of plasma diagnostics, it is necessary to determine some atomic characteristics, including energies and transition probabilities, for very many atoms and ions. Development of general codes for calculation of many types of atomic characteristics has been based on general but comparatively simple approximate methods. The program ATOM represents an attempt at effective use of such a general code. This report gives a brief description of the methods used, and the possibilities of and limitations to the code are discussed. Characteristics of the following processes can be calculated by ATOM: radiative transitions between discrete levels, radiative ionization and recombination, collisional excitation and ionization by electron impact, collisional excitation and ionization by point heavy particle (Born approximation only), dielectronic recombination, and autoionization. ATOM explores Born (for z=1) or Coulomb-Born (for z>1) approximations. In both cases exchange and normalization can be included. (N.K.)

  19. Corporate governance in the Netherlands : an overview of the application of the Tabaksblat Code in 2004

    NARCIS (Netherlands)

    Akkermans, Dirk; van Ees, Hans; Hermes, Niels; Hooghiemstra, Reggy; van der Laan, Gerwin; Postma, Theo; van Witteloostuijn, Arjen

    2007-01-01

    This article examines the overall acceptance of the best practice provisions contained in the Dutch corporate governance code and identifies those that receive comparably less agreement among 150 Dutch listed companies in 2004. The findings indicate a high level of compliance with the Code.

  20. Present state of the SOURCES computer code

    International Nuclear Information System (INIS)

    Shores, Erik F.

    2002-01-01

    In various stages of development for over two decades, the SOURCES computer code continues to calculate neutron production rates and spectra from four types of problems: homogeneous media, two-region interfaces, three-region interfaces and that of a monoenergetic alpha particle beam incident on a slab of target material. Graduate work at the University of Missouri - Rolla, in addition to user feedback from a tutorial course, provided the impetus for a variety of code improvements. Recently upgraded to version 4B, initial modifications to SOURCES focused on updates to the 'tape5' decay data library. Shortly thereafter, efforts focused on development of a graphical user interface for the code. This paper documents the Los Alamos SOURCES Tape1 Creator and Library Link (LASTCALL) and describes additional library modifications in more detail. Minor improvements and planned enhancements are discussed.