Testing the genotoxicity of some perfumes with high diethylphthalate (DEP levels using comet assay

Directory of Open Access Journals (Sweden)

Iman Al-Saleh

2015-05-01

Full Text Available The presence of phthalates in perfumes has gained recently some attention since these chemicals are added sometimes intentionally as a fixative. Our previous study tested 47 branded perfumes sold in Saudi market and found 68% of tested samples had diethylphthalate (DEP, above reported threshold limit of 1 ppm. Of these phthalates, DEP was found to have the highest mean value (1621.63 ppm. These results enticed us to test the potential genotoxicity of 7 brands in which their DEP contents were in the range of 1.06 ppm to 23649.3 ppm in human TK-6 cells using single cell gel electrophoresis assay (comet assay. Cells were exposed to 400 µl perfume for 2 hrs, at room temperature. Tail moment was (TM used as a metric measure for DNA damage and 25 cells per sample were determined by image analysis software. Four perfumes with DEP above 40 ppm produced significant DNA damage in TK-6 cells with TM of 54.27 ± 1.04, n=500 compare to the other 3 perfumes with DEP < 2 ppm (21.94 ± 1.09, n=300, untreated cells (2.99 ± 0.17, n=250 and cells induced with ethanol (33.76 ± 1.4, n=75 or methanol (23.82 ± 1.84, n=100 which are the vehicles used in perfume's preparations. The results suggest that DEP in perfumes might be one of the ingredients that provoked DNA damage; however, further investigation is required confirming our observation.

O depósito subungueal como disseminador e enteroparasitos

Directory of Open Access Journals (Sweden)

Carlos Alberto Moreira Campos

1974-04-01

Full Text Available Demonstramos, no depósito subungueal de 130 crianças residentes no bairro de Nova Descoberta, Natal - RN, a presença de ovos ou cistos de enteroparasitos, tais como: Ascaris lumbricoides, Trichocephalus trichiurus, Enterobius vermicularis, Ancylostomidae, Entamoeba coli, Entamoeba histolytica e Giardia lamblia. Ao lado da demonstração dos referidos parasitos, fizemos a correlação entre a incidência parasitária e as espécies encontradas no resíduo que se forma sob as unhas. Dos enteroparasitos encontrados, parece ser esta a primeira referência a ovos de ancilostomídeos no depósito subungueal. Dos 130 exames realizados 16 mostraram-se positivos, com uma percentagem de 12,30%.

Fe(III)-solar light induced degradation of diethyl phthalate (DEP) in aqueous solutions.

Science.gov (United States)

Mailhot, G; Sarakha, M; Lavedrine, B; Cáceres, J; Malato, S

2002-11-01

The degradation of diethyl phthalate (DEP) photoinduced by Fe(III) in aqueous solutions has been investigated under solar irradiation in the compound parabolic collector reactor at Plataforma Solar de Almeria. Hydroxyl radicals *OH, responsible of the degradation, are formed via an intramolecular photoredox process in the excited state of Fe(III) aquacomplexes. The primary step of the reaction is mainly due to the attack of *OH radicals on the aromatic ring. For prolonged irradiations DEP and its photoproducts are completely mineralized due to the regeneration of the absorbing species and the continuous formation of *OH radicals that confers a catalytic aspect to the process. Consequently, the degradation photoinduced by Fe(III) could be an efficient method of DEP removal from water.

Simulation and Experimental Study on Thermal Conductivity of [EMIM][DEP] + H_2 O + SWCNTs Nanofluids as a New Working Pairs

Science.gov (United States)

Li, Chang; Zhao, Zongchang; Zhang, Xiaodong; Li, Tianyu

2018-03-01

In this paper, the single-wall carbon nanotubes (SWCNTs) were dispersed into ionic liquid, 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM][DEP]), and its aqueous solution [EMIM][DEP](1) + H2O(2) to enhance the thermal conductivity of base liquids, which will be the promising working pairs for absorption heat pumps and refrigerators. The enhancement effects on thermal conductivity were studied by experiment and molecular dynamic simulation (MD) methods. The thermal conductivities of [EMIM][DEP] + SWCNTs (INF) and [EMIM][DEP](1) + H2O(2) + SWCNT(SNF) both with SWCNT mass fraction of 0.5, 1, and 2 (wt%) were measured by transient hot-wire method. The results indicate that the enhancement ratio of thermal conductivity of INF, and SNF can approach 1.30 when SWCNT is 2 (wt%). Moreover, SWCNTs has a higher enhancement ratio than multi-wall carbon nanotubes (MWCNTs). Density and thermal conductivity of [EMIM][DEP], [EMIM][DEP](1) + H2O(2), INF and SNF systems, together with self-diffusion coefficients of [EMIM]+, [DEP]-, [EMIM][DEP] and water in solution [EMIM][DEP](1) + H2O(2), were investigated by MD simulations. The results indicate that the maximum relative error between the simulated and experimental densities is about 2 %, and the simulated self-diffusion coefficient of [EMIM][DEP] is in the order of magnitude of 10^{-11} m2\\cdot s^{-1}. The average relative deviation for the simulated thermal conductivity of [EMIM][DEP](1) + H2O(2), INF and SNF from experimental ones are 23.57 %, 5 %, and 5 %, respectively. In addition, the contributions of kinetic energy, potential energy, and virial and partial enthalpy terms to thermal conductivity were also calculated. The results indicate that virial term's contribution to thermal conductivity is the maximum, which accounts for 75 % to 80 % of total thermal conductivity.

Comportamiento dinámico de depósitos aluviales en Colombia

OpenAIRE

Guzmán, Adolfo; Nuñez, Jsús; Parra, Fernando

2006-01-01

En este artículo se presentan las principales características de dos arenas de origen aluvial (Tumaco y Cali) potencialmente licuables, que históricamente han sido sometidas a cargas dinámicas generadas por sismos. Los dos depósitos se encuentran ubicados en áreas de amenaza sísmica alta, por lo que las aceleraciones máximas esperadas en roca fluctúan entre 0.2g y 0.3g. La caracterización de los depósitos granulares se realizó mediante pruebas de campo, complementados con ensayos de laborator...

Enfermedad de depósito glomerular: a propósito de un caso de glomerulonefritis fibrilar

OpenAIRE

Jorge de Jesús Cantillo; Rocío del Pilar López; Rafael Enrique Andrade

2009-01-01

En el diagnóstico rutinario por biopsia renal encontramos enfermedades glomerulares que tienen depósitos estructurales fibrilares en la matriz extracelular del glomérulo, visibles por microscopía electrónica. La amiloidosis es la glomerulopatía más común con depósitos de estas características ultraestructurales. Sin embargo, hay otras glomerulopatías con depósitos similares, negativas con rojo Congo, pero positivas para inmunoglobulinas. La glomerulonefritis fibrilar es una entidad diagnós...

Development of an Android application to estimate the parameters of DEP from the radiographic exam

International Nuclear Information System (INIS)

Soares, Flavio Augusto P.; Soares, Carina Klein; Martins, Alex Sander C.; Filgueiras, Tatiana Pereira; Recalcatti, Victor; Heis, Adriano

2013-01-01

The objective of this research was to develop an application for the Android operating system to calculate the entrance dose in the skin - DEP for the professional radiological techniques can estimate the dose absorbed by the patient. The application was written with the help of the ECLIPSE development suite together with the Google SDK. The DEP-Calc was designed to be used in a mobile device, so the program consists of simple and self-explanatory screens, occupies a small space in the internal memory of the device and is easy to use.To obtain the value of the DEP of a radiographic examination, the practitioner provides the variables used in the examination as well as the device, and from this information, the program calculates the value of the DEP. With its use, as well as meet a legal requirement, allows an improvement in image quality and dose optimization, since the professional has knowledge of the radiation produced. (author)

MURINE PULMONARY MACROPHAGE EXPRESSION AND PRODUCTION OF TNFA AND MIP-2 AFTER EXPOSURE TO DIESEL EXHAUST PARTICLES (DEP) AND EXTRACTS

Science.gov (United States)

DEP constitute an important fraction of particulate air pollution and have been shown to cause inflammation of the airways. The aim of this study was to investigate the inflammatory cytokine response of alveolar macrophages exposed to DEP and DEP-extracts. A murine alveolar macr...

Depósitos corneales de ciprofloxacino Corneal deposits of ciprofloxacin

Directory of Open Access Journals (Sweden)

Taimi Cárdenas Díaz

2010-01-01

Full Text Available Las fluoroquinolonas son ampliamente utilizadas para el tratamiento de infecciones oculares bacterianas, ya que tienen actividad tanto para grampositivos, como para gramnegativos. Son fármacos seguros, pero se han descrito depósitos blancos cristalinianos en pacientes con administración frecuente y prolongada;en la mayoría de los casos, ellos resuelven de forma lenta al interrumpir el tratamiento. Si esto no ocurre, los depósitos se deben desbridar. Se ilustran 3 casos operados de catarata que llevaron tratamiento con ciprofloxacino en el posoperatorio, en los cuales se presentaron depósitos corneales y aunque disminuyó la agudeza visual, esta se recuperó después de la queratectomía.Fluoroquinolones are broadly used for the treatment of bacterial ocular infections, since they can act upon both grampositive and gramnegative bacteria. They are safe drugs, but white corneal deposits have been described in patients who frequently take this drug for a long period of time. In most of the cases, the deposits disappear slowly after the treatment is interrupted. If this does not happen, the deposits should be eliminated. Three cases operated on from cataract were presented, who had been taken ciprofloxacin in the postoperative stage and had corneal deposits. Although their visual acuity decreased, it recovered after keratectomy.

Numerical Model of Streaming DEP for Stem Cell Sorting

Directory of Open Access Journals (Sweden)

Rucha Natu

2016-11-01

Full Text Available Neural stem cells are of special interest due to their potential in neurogenesis to treat spinal cord injuries and other nervous disorders. Flow cytometry, a common technique used for cell sorting, is limited due to the lack of antigens and labels that are specific enough to stem cells of interest. Dielectrophoresis (DEP is a label-free separation technique that has been recently demonstrated for the enrichment of neural stem/progenitor cells. Here we use numerical simulation to investigate the use of streaming DEP for the continuous sorting of neural stem/progenitor cells. Streaming DEP refers to the focusing of cells into streams by equilibrating the dielectrophoresis and drag forces acting on them. The width of the stream should be maximized to increase throughput while the separation between streams must be widened to increase efficiency during retrieval. The aim is to understand how device geometry and experimental variables affect the throughput and efficiency of continuous sorting of SC27 stem cells, a neurogenic progenitor, from SC23 cells, an astrogenic progenitor. We define efficiency as the ratio between the number of SC27 cells over total number of cells retrieved in the streams, and throughput as the number of SC27 cells retrieved in the streams compared to their total number introduced to the device. The use of cylindrical electrodes as tall as the channel yields streams featuring >98% of SC27 cells and width up to 80 µm when using a flow rate of 10 µL/min and sample cell concentration up to 105 cells/mL.

Bacterial flagellar capping proteins adopt diverse oligomeric states

Energy Technology Data Exchange (ETDEWEB)

Postel, Sandra; Deredge, Daniel; Bonsor, Daniel A.; Yu, Xiong; Diederichs, Kay; Helmsing, Saskia; Vromen, Aviv; Friedler, Assaf; Hust, Michael; Egelman, Edward H.; Beckett, Dorothy; Wintrode, Patrick L.; Sundberg, Eric J. (UV); (Braunschweig); (Maryland-MED); (Konstanz); (Maryland); (Hebrew)

2016-09-24

Flagella are crucial for bacterial motility and pathogenesis. The flagellar capping protein (FliD) regulates filament assembly by chaperoning and sorting flagellin (FliC) proteins after they traverse the hollow filament and exit the growing flagellum tip. In the absence of FliD, flagella are not formed, resulting in impaired motility and infectivity. Here, we report the 2.2 Å resolution X-ray crystal structure of FliD fromPseudomonas aeruginosa, the first high-resolution structure of any FliD protein from any bacterium. Using this evidence in combination with a multitude of biophysical and functional analyses, we find thatPseudomonasFliD exhibits unexpected structural similarity to other flagellar proteins at the domain level, adopts a unique hexameric oligomeric state, and depends on flexible determinants for oligomerization. Considering that the flagellin filaments on which FliD oligomers are affixed vary in protofilament number between bacteria, our results suggest that FliD oligomer stoichiometries vary across bacteria to complement their filament assemblies.

1/3rd arc-second Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — This is a tiled collection of the 3D Elevation Program (3DEP) and is 1/3 arc-second (approximately 10 m) resolution.The 3DEP data holdings serve as the elevation...

1/9th Arc-second Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — This is a tiled collection of the 3D Elevation Program (3DEP) and is 1/9 arc-second (approximately 3 m) resolution.The 3DEP data holdings serve as the elevation...

Effects of High-Intensity Swimming on Lung Inflammation and Oxidative Stress in a Murine Model of DEP-Induced Injury.

Science.gov (United States)

Ávila, Leonardo C M; Bruggemann, Thayse R; Bobinski, Franciane; da Silva, Morgana Duarte; Oliveira, Regiane Carvalho; Martins, Daniel Fernandes; Mazzardo-Martins, Leidiane; Duarte, Marta Maria Medeiros Frescura; de Souza, Luiz Felipe; Dafre, Alcir; Vieira, Rodolfo de Paula; Santos, Adair Roberto Soares; Bonorino, Kelly Cattelan; Hizume Kunzler, Deborah de C

2015-01-01

Studies have reported that exposure to diesel exhaust particles (DEPs) induces lung inflammation and increases oxidative stress, and both effects are susceptible to changes via regular aerobic exercise in rehabilitation programs. However, the effects of exercise on lungs exposed to DEP after the cessation of exercise are not clear. Therefore, the aim of this study was to evaluate the effects of high-intensity swimming on lung inflammation and oxidative stress in mice exposed to DEP concomitantly and after exercise cessation. Male Swiss mice were divided into 4 groups: Control (n = 12), Swimming (30 min/day) (n = 8), DEP (3 mg/mL-10 μL/mouse) (n = 9) and DEP+Swimming (n = 8). The high-intensity swimming was characterized by an increase in blood lactate levels greater than 1 mmoL/L between 10th and 30th minutes of exercise. Twenty-four hours after the final exposure to DEP, the anesthetized mice were euthanized, and we counted the number of total and differential inflammatory cells in the bronchoalveolar fluid (BALF), measured the lung homogenate levels of IL-1β, TNF-α, IL-6, INF-ϫ, IL-10, and IL-1ra using ELISA, and measured the levels of glutathione, non-protein thiols (GSH-t and NPSH) and the antioxidant enzymes catalase and glutathione peroxidase (GPx) in the lung. Swimming sessions decreased the number of total cells (pswimming groups compared with the control groups, as did the CAT lung levels (p = 0.0001). Simultaneously, swimming resulted in an increase in the GSH-t and NPSH lung levels in the DEP group (p = 0.0001 and pswimming sessions decreased the lung inflammation and oxidative stress status during DEP-induced lung inflammation in mice.

2015 USGS Lidar: 3DEP Co-Op South Central MS

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Mississippi Coastal QL2 Lidar with 3DEP Extension Lidar 0.7m NPS Lidar Data Acquisition and Processing Production Task USGS Contract No. G10PC00057 Task Order No....

Comments on INFCE/DEP./WG-4/100 by France

International Nuclear Information System (INIS)

1978-10-01

This document is a comment by the French delegation upon INFCE/DEP./WG-4/100. It expresses the French view that consideration of sub-national threats should be treated quite separately from questions of proliferation and that the methodology must also consider the possible proliferation strategies of governments relative to international commitments and safeguards systems

United Kingdom comments on INFCE/DEP./WG-4/72

International Nuclear Information System (INIS)

1978-11-01

This document presents comments prepared by the UK delegation upon INFCE/DEP./WG-4/72. It details differences in approach to the ALARA concept between the US and the UK and comments on the figures presented for occupational and general public radiation exposure in the context of the THORP plant to be constructed at Windscale, UK

Depósito fiscal en Salta Capital para productos agrícolas del NOA

OpenAIRE

Balestrini González, Agustín

2016-01-01

261 p. il. La siguiente tesis busca describir cuales son los lineamientos o reglamentaciones legales que delimitan el funcionamiento de un Depósito Fiscal, como herramienta de control del órgano fiscalizador Nacional de las operaciones internacionales, la Dirección General de Aduana, que funciona dentro de la órbita de la Administración Federal de Ingresos Públicos. También se busca describir el contexto productivo en el cual podría ejecutarse este depósito y por lo tanto, se incluyó...

2015 USGS Lidar DEM: 3DEP Co-Op South Central MS

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Mississippi Coastal QL2 Lidar with 3DEP Extension Lidar 0.7m NPS Lidar Data Acquisition and Processing Production Task USGS Contract No. G10PC00057 Task Order No....

Effects of High-Intensity Swimming on Lung Inflammation and Oxidative Stress in a Murine Model of DEP-Induced Injury.

Directory of Open Access Journals (Sweden)

Leonardo C M Ávila

Full Text Available Studies have reported that exposure to diesel exhaust particles (DEPs induces lung inflammation and increases oxidative stress, and both effects are susceptible to changes via regular aerobic exercise in rehabilitation programs. However, the effects of exercise on lungs exposed to DEP after the cessation of exercise are not clear. Therefore, the aim of this study was to evaluate the effects of high-intensity swimming on lung inflammation and oxidative stress in mice exposed to DEP concomitantly and after exercise cessation. Male Swiss mice were divided into 4 groups: Control (n = 12, Swimming (30 min/day (n = 8, DEP (3 mg/mL-10 μL/mouse (n = 9 and DEP+Swimming (n = 8. The high-intensity swimming was characterized by an increase in blood lactate levels greater than 1 mmoL/L between 10th and 30th minutes of exercise. Twenty-four hours after the final exposure to DEP, the anesthetized mice were euthanized, and we counted the number of total and differential inflammatory cells in the bronchoalveolar fluid (BALF, measured the lung homogenate levels of IL-1β, TNF-α, IL-6, INF-ϫ, IL-10, and IL-1ra using ELISA, and measured the levels of glutathione, non-protein thiols (GSH-t and NPSH and the antioxidant enzymes catalase and glutathione peroxidase (GPx in the lung. Swimming sessions decreased the number of total cells (p<0.001, neutrophils and lymphocytes (p<0.001; p<0.05 in the BALF, as well as lung levels of IL-1β (p = 0.002, TNF-α (p = 0.003, IL-6 (p = 0.0001 and IFN-ϫ (p = 0.0001. However, the levels of IL-10 (p = 0.01 and IL-1ra (p = 0.0002 increased in the swimming groups compared with the control groups, as did the CAT lung levels (p = 0.0001. Simultaneously, swimming resulted in an increase in the GSH-t and NPSH lung levels in the DEP group (p = 0.0001 and p<0.002. We concluded that in this experimental model, the high-intensity swimming sessions decreased the lung inflammation and oxidative stress status during DEP-induced lung

O depósito subungueal como disseminador e enteroparasitos

Directory of Open Access Journals (Sweden)

Carlos Alberto Moreira Campos

1974-04-01

Full Text Available Demonstramos, no depósito subungueal de 130 crianças residentes no bairro de Nova Descoberta, Natal - RN, a presença de ovos ou cistos de enteroparasitos, tais como: Ascaris lumbricoides, Trichocephalus trichiurus, Enterobius vermicularis, Ancylostomidae, Entamoeba coli, Entamoeba histolytica e Giardia lamblia. Ao lado da demonstração dos referidos parasitos, fizemos a correlação entre a incidência parasitária e as espécies encontradas no resíduo que se forma sob as unhas. Dos enteroparasitos encontrados, parece ser esta a primeira referência a ovos de ancilostomídeos no depósito subungueal. Dos 130 exames realizados 16 mostraram-se positivos, com uma percentagem de 12,30%.In the deposit under the finger nails of 130 children living at Nova Descoberta suburb, Natal - RN, the presence of eggs or cysts enteroparasites such as: Ascaris lumbricoides, Trichocephalus trichiurus, Enterobius vermicularis, Ancylostomidae, Entamoeba histolytica e Giardia lamblia was detected. Besides the demonstration of the abovementioned parasites, a correlation between the parasite incidence and the species found in the residue acumulated under the finger nails was tried.

Divergent Explanatory Production (DEP): The Relationship between Resilience and Creativity

Science.gov (United States)

Hernández, Óscar Sánchez; Méndez, Francisco Xavier; Garber, Judy

2015-01-01

Introduction: The aim of the study is to describe and analyze a new test and construct, Divergent Explanatory Production (DEP), defined as the ability to observe adverse situations from various points of view. At the theoretical level, it is a bridge between the reformulated model of learned helplessness (as a resilience model), and creative…

DEP2SA: A Decentralised Efficient Privacy-Preserving and Selective Aggregation Scheme in Advanced Metering Infrastructure

OpenAIRE

Mustafa, Mustafa; Zhang, Ning; Kalogridis, Georgios; Fan, Zhong

2015-01-01

This paper proposes a novel solution, called a decentralised, efficient, privacy-preserving and selective aggregation (DEP2SA) scheme, designed to support secure and user privacy-preserving data collection in the advanced metering infrastructure. DEP2SA is more efficient and applicable in real-life deployment, as compared with the state of the art, by adopting and adapting a number of key technologies: (1) it uses a multi-recipient system model, making it more applicable to a liberalised elec...

Three-Dimensional Interaction of a Large Number of Dense DEP Particles on a Plane Perpendicular to an AC Electrical Field

Directory of Open Access Journals (Sweden)

Chuanchuan Xie

2017-01-01

Full Text Available The interaction of dielectrophoresis (DEP particles in an electric field has been observed in many experiments, known as the “particle chains phenomenon”. However, the study in 3D models (spherical particles is rarely reported due to its complexity and significant computational cost. In this paper, we employed the iterative dipole moment (IDM method to study the 3D interaction of a large number of dense DEP particles randomly distributed on a plane perpendicular to a uniform alternating current (AC electric field in a bounded or unbounded space. The numerical results indicated that the particles cannot move out of the initial plane. The similar particles (either all positive or all negative DEP particles always repelled each other, and did not form a chain. The dissimilar particles (a mixture of positive and negative DEP particles always attracted each other, and formed particle chains consisting of alternately arranged positive and negative DEP particles. The particle chain patterns can be randomly multitudinous depending on the initial particle distribution, the electric properties of particles/fluid, the particle sizes and the number of particles. It is also found that the particle chain patterns can be effectively manipulated via tuning the frequency of the AC field and an almost uniform distribution of particles in a bounded plane chip can be achieved when all of the particles are similar, which may have potential applications in the particle manipulation of microfluidics.

Depósito elevado, en Belfast

Directory of Open Access Journals (Sweden)

Gibberd Cbe, Felix

1964-07-01

Full Text Available An outstanding feature of the buildings which constitute the modern Ulster Hospital, at Dundonald, Belfast, is the elevated tank which supplies the hospital with water. The shape of this tank is pleasant and it provides a charming and smooth outline against the sky: it is reminiscent of a large sized drinking cup. The structure, made of reinforced concrete, is of straighforward design. The central support is used as the chimney stack for the boiler room. The water tank has an overall height of 32.5 m and will hold 450 cubic metres of water. The tank itself is 15.5 m high and has a maximum diameter of 10 m. The walls vary in thickness between 0.32 and 0.15 m. The hoop reinforcement is provided by 19 mm bars, whilst the radial reinforcement consists of 9 mm wires. The central column, or stack, has a wall thickness of 0.15 m, and is of circular cross section. Vertical 35 mm rods provide the metal reinforcement. Externally, this central column has eight ribs, 20 cm wide and 30 cm deep. The whole structure rests on an octogonal slab, with a maximum horizontal dimension of 9 m and is 2 m thick. The maximum tensile strength allowed for the concrete, when working in the most unsatisfactory conditions, is 12 kg/cm2.Entre las distintas construcciones que constituyen el moderno hospital Ulster de Dundonald, en Belfast (Irlanda del Norte, destaca, particularmente, el depósito elevado para el suministro y reserva de agua. Desde el punto de vista arquitectónico, su forma es de plástica agradable y de línea suave y graciosa, puesto que reproduce la silueta de una copa, de gran tamaño, muy utilizada. Su estructura, de hormigón armado, es sencilla y ha permitido aprovechar el núcleo central o soporte, hueco, para chimenea de la sala, de calderas. La altura total del depósito es de 33,50 m y su capacidad de 450 m3. El depósito propiamente dicho tiene 15,5 m de altura y 10 m de diámetro máximo. El espesor de las paredes varía de 0,33 a 0,15 m. Las

The HARWELL version of the computer code E-DEP-1

International Nuclear Information System (INIS)

Matthews, M.D.

1983-03-01

This document describes the modified HARWELL version of the computer program EDEP-1 which has been in use on the IBM Central Computer for some years. The program can be used to calculate heavy ion ranges and/or profiles of energy deposited into nuclear processes for a wide variety of ion/target combinations. The initial setting up of this program on the IBM Central Computer has been described in an earlier report. A second report was later issued to bring the first report up to date following changes to this code required to suit the needs of workers at HARWELL. This later report described in particular the provision of new electronic stopping powers and an alternative method for calculating the energy straggle of beam ions with depth in a target. This new report describes further extensions to the electronic stopping powers available in the HARWELL version of this program and, for the first time, gives details of alternative nuclear stopping powers now available. This new document is intended as a reference manual for the use of the HARWELL version of EDEP-1. In this respect this document should be the final report on the status of this program. (author)

Antecedentes y reforma en la administración de depósitos del Cabildo Catedral de Toledo (1591-1613

Directory of Open Access Journals (Sweden)

Susana Villaluenga de Gracia

2010-07-01

del arca. Tras su aprobación, el memorial regularía la elección anual del depositario, dificultando su reelección, intensificaría el control sobre el depósito con el nombramiento de dos visitadores y concretaría el proceder en el registro de las operaciones que se ejecutaban en torno al mismo. A este respecto, cada entrada y salida de dinero del depósito se anotaba en dos libros: libro primero y segundo del arca de depósitos, cuya teneduría ratificaba el Memorial. Además de estos dos libros, las operaciones se registraban en un Manual y Mayor por partida doble. Al final del año y, antes de la elección de los oficios prevista para el 22 de diciembre, los visitadores tomaban la cuenta al depositario por cargo y descargo, revelándose este método compatible con la partida doble, como se demostrará en este trabajo.

1 Arc-second Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — This is a tiled collection of the 3D Elevation Program (3DEP) and is 1 arc-second (approximately 30 m) resolution.The elevations in this Digital Elevation Model...

Depósito elevado de agua en Baydon Wiltshire - Gran Bretaña

Directory of Open Access Journals (Sweden)

Percey Scherrer, Edmund

1980-11-01

Full Text Available The elevated water tank in Baydon, built to supply, among other edifices, a service station located on the M 4 highway, is 18 m high and holds 50,000 liters. It is made up by a central column of in situ concrete, triangular prefabricated beams —which support the tank— and prefabricated aggregate panels for the outside. The choice of neutral colors for the building materials contributed to the preservation of the appearance of the countryside.

El depósito elevado de agua de Baydon construido para abastecer, entre otras edificaciones, una estación de servicio situada en la autopista M 4, tiene 18 m de altura y 50.000 litros de capacidad. Está formado por una columna central de hormigón in situ, unas vigas prefabricadas triangulares —que soportan el depósito de agua propiamente dicho— y unos paneles prefabricados de árido visto para la parte exterior. La elección de colores neutros, para los materiales de construcción, contribuyó a no deteriorar el paisaje.

METHODOLOGY OF THE HYBRID PROPULSION SYSTEM (DMP & DEP FOR TRIMARAN TYPE FAST PATROL BOAT

Directory of Open Access Journals (Sweden)

Aulia Widyandari

2012-04-01

Full Text Available There are lot of research done to develop a patrol boat, from the modification of hull model until propulsion system equipment. For example the model ship type AMV (Advanced Marine Vehicle was developed starting from the Catamaran, Trimaran and  Pentamaran model. Everything is aimed at obtaining the ship design that has the speed and stability. In addition to achieving high-speed vessel must be equipped with propulsion (Main Power is great, that means the main engine dimensions, auxiliary equipments and fuel tanks is too large. Many Limitations of space on the ship's engine room trimaran vessel is the main obstacle in designing propulsion system. Beside that Patrol boat should have many missions speed, so propulsion system should be designed at that conditions.   Hybrid propulsion is a combination of Diesel Mechanical Propulsion (DMP with Diesel Electric Propulsion (DEP. DMP system is connected directly to the propeller shaft (or through a reduction-gear. DMP has provide more efficiency rate of 95%. While DEP is only able to provide efficiency by 85% - 89% is slightly lower than DMP, but the DEP offers many advantages such as simplicity and suitability in the rotational speed settings, control systems, engine power production Redundancy, Flexibility in the design of equipments layout in engine rooms, noise, vibration and fuel consumption efficiency which affects the lower pollution.   Design of Hybrid Propulsion system can be satisfied and achieved the Power requirements and optimally at all speed condition of patrol boat. Therefore the author made using modeling Maxsurf-11.12 software and carried out various optimization of the choice of main engine, propeller and system conditions for fast patrol boat cruise. 

Alaska 2 Arc-second Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — This is a tiled collection of the 3D Elevation Program (3DEP) and is 2 arc-second (approximately 60 m) resolution covering Alaska. The elevations in this Digital...

Influência de depósito de lixo na fitossociologia das espécies arbóreas de cerrado

OpenAIRE

Santana, Otacílio Antunes

2007-01-01

Mudanças na estrutura física e química do solo e nas águas subterrâneas foram observadas em regiões adjacentes aos depósitos de lixo, com acúmulo de metais pesados e nutrientes. Geralmente, existe uma vegetação nativa associada a esses depósitos em suas áreas adjacentes. Os objetivos deste trabalho foram: i) realizar o levantamento da composição das espécies arbóreas nativas de Cerrado e quantificar seus parâmetros fitossociológicos; ii) realizar o levantamento das espécies arbóreas exóticas ...

Direct current insulator based dielectrophoresis (DC-iDEP) microfluidic chip for blood plasma separation

OpenAIRE

Mohammadi, Mahdi

2015-01-01

Lab-on-a-Chip (LOC) integrated microfluidics has been a powerful tool for new developments in analytical chemistry. These microfluidic systems enable the miniaturization, integration and automation of complex biochemical assays through the reduction of reagent use and enabling portability.Cell and particle separation in microfluidic systems has recently gained significant attention in many sample preparations for clinical procedures. Direct-current insulator-based dielectrophoresis (DC-iDEP) ...

Aspectos metodológicos para análise de depósitos de pulverizações pela determinação dos depósitos pontuais Methodological aspects for spray deposit analysis by punctual deposit determination

Directory of Open Access Journals (Sweden)

R.T. Souza

2007-03-01

Full Text Available Objetivou-se com este trabalho avaliar a variabilidade dos depósitos de traçadores, simulando herbicidas aplicados em pós-emergência, em populações de Brachiaria plantaginea e Commelina benghalensis infestantes da cultura da soja. Os depósitos dos traçadores foram também avaliados em plantas da cultura, utilizando-se o pulverizador de barra tratorizado, com pontas de jato plano da série 110-SF-03, aplicando o volume de 250 L ha-1 de calda preparada com 0,18% de corante Azul Brilhante e 0,18% de Amarelo Saturn Yellow. Os alvos naturais utilizados foram: plantas de soja com 150 repetições; B. plantaginea no estádio de duas a oito folhas, coletadas na linha da cultura com 141 repetições; e B. plantaginea e C. benghalensis nas entrelinhas, com 150 e 50 repetições, respectivamente. Os alvos artificiais foram constituídos por lâminas distribuídas a 0, 12,2 e 22,5 cm da linha da cultura. Após a aplicação, os alvos foram coletados individualmente e lavados com 30, 20 e 15 mL de água deionizada, para soja, lâminas e plantas daninhas, respectivamente. Estas originaram as amostras analisadas em espectrofotômetro, estimando-se o depósito de calda em µL por planta e µL cm² de área foliar. Foram ajustadas curvas de regressão entre os depósitos unitários e as freqüências acumuladas, utilizando-se o modelo de Gompertz. As relações entre os depósitos máximos e mínimos foram de 7, 4, 10 e 6 para soja, C. benghalensis e B. plantaginea na linha e na entrelinha, respectivamente. As plantas de B. plantaginea da entrelinha receberam, em média, 34% a mais de depósito do que as plantas da linha.The objective of this research was to study the variability of individual tracer deposits (simulating herbicides applied in post-emergence on Brachiaria plantaginea and Commelina benghalensis infesting soybeans crop. The tracer deposits were evaluated also on the crop. A boom sprayer was used, equipped with 110-SF-03 nozzles and 250 L ha

Hybrid Modeling Method for a DEP Based Particle Manipulation

Directory of Open Access Journals (Sweden)

Mohamad Sawan

2013-01-01

Full Text Available In this paper, a new modeling approach for Dielectrophoresis (DEP based particle manipulation is presented. The proposed method fulfills missing links in finite element modeling between the multiphysic simulation and the biological behavior. This technique is amongst the first steps to develop a more complex platform covering several types of manipulations such as magnetophoresis and optics. The modeling approach is based on a hybrid interface using both ANSYS and MATLAB to link the propagation of the electrical field in the micro-channel to the particle motion. ANSYS is used to simulate the electrical propagation while MATLAB interprets the results to calculate cell displacement and send the new information to ANSYS for another turn. The beta version of the proposed technique takes into account particle shape, weight and its electrical properties. First obtained results are coherent with experimental results.

Computational Analysis of Enhanced Circulating Tumour Cell (CTC Separation in a Microfluidic System with an Integrated Dielectrophoretic-Magnetophorectic (DEP-MAP Technique

Directory of Open Access Journals (Sweden)

Wan Shi Low

2016-08-01

Full Text Available Cell based cancer analysis is an important analytic method to monitor cancer progress on stages by detecting the density of circulating tumour cells (CTCs in the blood. Among the existing microfluidic techniques, dielectrophoresis (DEP, which is a label-free detection method, is favoured by researchers. However, because of the high conductivity of blood as well as the rare presence of CTCs, high separation efficiency is difficult to achieve in most DEP microdevices. Through this study, we have proposed a strategy to improve the isolation performance, as such by integrating a magnetophoretic (MAP platform into a DEP device. Several important aspects to be taken into MAP design consideration, such as permanent magnet orientation, magnetic track configuration, fluid flow parameter and separation efficiency, are discussed. The design was examined and validated by numerical simulation using COMSOL Multiphysics v4.4 software (COMSOL Inc., Burlington, MA, USA, mainly presented in three forms: surface plot, line plot, and arrow plot. From these results, we showed that the use of a single permanent magnet coupled with an inbuilt magnetic track of 250 μm significantly strengthens the magnetic field distribution within the proposed MAP stage. Besides, in order to improve dynamic pressure without compromising the uniformity of fluid flow, a wide channel inlet and a tree-like network were employed. When the cell trajectory within a finalized MAP stage is computed with a particle tracing module, a high separation efficiency of red blood cell (RBC is obtained for blood samples corresponding up to a dilution ratio of 1:7. Moreover, a substantial enhancement of the CTCs’ recovery rate was also observed in the simulation when the purposed platform was integrated with a planar DEP microdevice.

Predimensionamiento de la estructura perimetral de un gran depósito de agua

OpenAIRE

Liria Montañés, José; Sainz Borda, José Ángel

1983-01-01

RESUMEN. Una de las obras más características del proyecto de abastecimientos de aguas a poblaciones son los depósitos, cuyos elementos estructurales deben diseñarse atendiendo a su estabilidad y a una optimización de su costo, proceso muy influenciado por el terreno. La pared perimetral tiene gran importancia es este diseño, y a su estudio se dedica este artículo, que ofrece ábacos de aplicación inmediata al predimensionamiento de este tipo de estructuras.

Estudio fotogramétrico del depósito de agua de Canteras

OpenAIRE

Aparicio Cirre, María M.

2008-01-01

El Deposito de Agua de Canteras, forma parte de una manzana limitada entre las calles Trujillo, Tornavacas, Cestona y carretera del cementerio, por la cual se accede al inmueble. Y por su parte trasera está limitada por las canteras romanas. El Depósito de Agua está formado principalmente por dos naves, una longitudinal y otra transversal, en planta tiene forma de “t”. Las dimensiones de la nave longitudinal donde se almacena el agua son: 2naves x 9,8m de largo x 5,7m de ancho x 2,4m de pr...

HvDep1 Is a Positive Regulator of Culm Elongation and Grain Size in Barley and Impacts Yield in an Environment-Dependent Manner.

Directory of Open Access Journals (Sweden)

Toni Wendt

Full Text Available Heterotrimeric G proteins are intracellular membrane-attached signal transducers involved in various cellular processes in both plants and animals. They consist of three subunits denoted as α, β and γ. The γ-subunits of the so-called AGG3 type, which comprise a transmembrane domain, are exclusively found in plants. In model species, these proteins have been shown to participate in the control of plant height, branching and seed size and could therefore impact the harvestable yield of various crop plants. Whether AGG3-type γ-subunits influence yield in temperate cereals like barley and wheat remains unknown. Using a transgenic complementation approach, we show here that the Scottish malting barley cultivar (cv. Golden Promise carries a loss-of-function mutation in HvDep1, an AGG3-type subunit encoding gene that positively regulates culm elongation and seed size in barley. Somewhat intriguingly, agronomic field data collected over a 12-year period reveals that the HvDep1 loss-of-function mutation in cv. Golden Promise has the potential to confer either a significant increase or decrease in harvestable yield depending on the environment. Our results confirm the role of AGG3-type subunit-encoding genes in shaping plant architecture, but interestingly also indicate that the impact HvDep1 has on yield in barley is both genotypically and environmentally sensitive. This may explain why widespread exploitation of variation in AGG3-type subunit-encoding genes has not occurred in temperate cereals while in rice the DEP1 locus is widely exploited to improve harvestable yield.

Multiplicador monetario y dinero electrónico. Creación de dinero a partir de depósitos y efectivo electrónico

OpenAIRE

Ricardo Plaza Martínez

2014-01-01

En el presente trabajo se analiza, por medio del multiplicador monetario, el hipotético papel que pueda llegar a tener el dinero electrónico en el conjunto de la oferta monetaria. Suponiendo una sustitución o compra de efectivo tradicional o depósitos a la vista por dinero electrónico, y distinguiendo 2 tipos de dinero electrónico —depósitos de dinero electrónico y efectivo electrónico—, así como tomando en cuenta diferentes formas de emisión en relación con la exigencia de distintos coeficie...

Depósito elevado para la Fiat

Directory of Open Access Journals (Sweden)

Nervi, Pier Luigi

1965-07-01

Full Text Available At the Turin Fiat factory an elevated water tank has been built, with a capacity of 2,000 m3 60 m above the ground, and cup shaped. The structure is reinforced concrete, and prefabricated panels are used, which are supported by a concrete disc, a cylindrical crown and radial ribs. The whole rests on piles. The stem is 8 m in diameter, and has been constructed with the aid of U shaped cylindrical panels, 3 cm in thickness, which served as external formwork for the stem walls. These are 60 cm thick at the bottom, and 50 cm at the top. The tank itself is a paraboloid, made with triangular panels which together form conical circular rings. These also served as formwork, and were supported by a tubular scaffolding. An observation post has been built on top of the tank. It is 25 m in diameter, and is covered with a ribbed spherical cupola, supported by hinged columns, which allow radial deformations, which are not transmitted to the top ring of the tank. The latter, being full of water, is kept at a more uniform temperature than the cupular roof, which is fully exposed to the weather.En la factoría Fiat, de Turín (Italia, se ha construido este depósito elevado, en forma de copa, de 2.000 m3 de capacidad y unos 60 m de altura sobre el suelo. Es de hormigón armado y paneles prefabricados, apoyándose sobre un disco de hormigón, una corona cilíndrica y contrafuertes radiales; todo lo cual descansa sobre pilotes. El fuste, de 8 m de diámetro, se ha construido con la ayuda de una serie de paneles, de superficie cilíndrica y sección transversal en forma de U con alas asimétricas, de 3 cm de espesor, que sirvieron de encofrado exterior en el hormigonado de las paredes, cuyo espesor varía de 60 cm en la zona inferior a 50 cm en la superior. La cubeta es un meridiano parabólico de revolución, constituido por paneles triangulares, formando anillos troncocónicos, que se utilizaron también como encofrado, apoyado sobre un entramado tubular en

Glomerulonefritis fibrilar: Una rara forma de enfermedad glomerular por depósitos organizados

Directory of Open Access Journals (Sweden)

Marta B. Cabrera

2011-10-01

Full Text Available Se describe el caso de una mujer de 67 años de edad que consultó por debilidad y astenia, constatándose proteinuria de rango nefrótico y dislipemia. Se realizó punción para biopsia renal, la que se analizó por microscopia óptica, inmunofluorescencia y microscopia electrónica de transmisión. El análisis ultra-estructural reveló la existencia de depósitos fibrilares organizados, rectos, no ramificados, cuyo espesor osciló entre 15 y 20 nm. Dichas fibrillas ópticamente se veían como una expansión mesangial discretamente nodular, ligeramente PAS positiva, rojo Congo negativa y débilmente positiva para IgG. El diagnóstico fue glomerulonefritis fibrilar. Las enfermedades glomerulares por depósitos organizados pueden exhibir superposición sindrómica e histopatológica. Por tal motivo, resulta de importancia una primera separación entre aquellas rojo Congo positivas o negativas, siendo en este último caso la microscopia electrónica de transmisión la que diferencia dos entidades: la glomerulonefritis fibrilar y la glomerulonefritis inmunotactoide. Esta diferencia se apoya no sólo en las características ultraestructurales, sino en sus características clínicas. La glomerulonefritis inmunotactoide muestra una fuerte asociación con procesos linfoproliferativos, a diferencia de lo que ocurre con la glomerulonefritis fibrilar.

Caracterización composicional de los depósitos arenosos actuales generados en el Sistema Central

Directory of Open Access Journals (Sweden)

Arribas, J.

1989-08-01

Full Text Available In this work we have studied the light mineral fraction of modern sands derived from single source lithologies (plutonic, gneissic or slate-schists in the Sistema Central (Central Spain. In this way we can analize the control of the source area lithology in sand composition. First we pay attention on tbe control of grain size sand in composition. Rock fragments decrease when grain size decreases. However, the amount of feldspar increases due to its low mechanical stability. Thus, the K/P index (K-feldspar/plagioclases is highly variable with grain size, because the different mechanical stabilities of both minerals. The trends of the amounts of components in relation with grain size are very similar, in a11 deposits. However, each percentages vary markedly between source areas with different lithologies. The projection area of the studied sands in a QFFR díagram is highly controled by grain size and lithology of source area. Thus, sands derived from slate-schists lithology appear near QFR fringe in a11 grain size fractions. Sands derived from plutonic or gneissic rocks have a high dispersion in the diagram, fram FR pole to QF fringe, depending on grain size of the sand. We conclude that the use of a single sand size fraction (0,5-0,25 mm to provenance analysis permits to discrimine source lithologies, but with a 1055 of information about global deposit compositionSe caracteriza composicionalmente la fracción ligera arenosa de los depósitos detríticos actuales generados en zonas de cabecera de arroyos que drenan macizos del Sistema Central con distintas litologías (plutónicas, gnéisicas o pizarras-esquistos. Dicha caracterización se ha basado en el análisis petrográfico de las muestras recogidas. Este análisis se ha efectuado, en cada muestra, en cinco fracciones de tamaño con intervalos de l ̣Ǿ entre 2 mm y 0,062 mm. De este modo se estudia el control que ejercen tanto la litología del área fuente como el tamaño de grano en

NEUROTROPHINS OPERATE AT DIFFERENT LEVELS OF THE RESPIRATORY TRACT IN RESPONSES OF ALLERGIC MICE TO DIESEL EXHAUST PARTICLES (DEP)

Science.gov (United States)

Neurotrophins including NGF, NT-3, and BDNF are linked to allergic responses. Treatment with anti-p75 (pan-neurotrophin receptor) prevents the increase in airflow obstruction caused by exposure to DEP in ovalbumin (OVA)-allergic mice (Toxicol Sci 84(S1):91, 2005). Our present goa...

High performance flexible pH sensor based on carboxyl-functionalized and DEP aligned SWNTs

International Nuclear Information System (INIS)

Liu, Lu; Shao, Jinyou; Li, Xiangming; Zhao, Qiang; Nie, Bangbang; Xu, Chuan; Ding, Haitao

2016-01-01

Highlights: • The flexible chemiresistive pH sensor based on two-terminal microsensors eliminating the need for a reference electrode, is simple in structure and can be fabricated on a variety of substrates such as PET, PI and PVC. • SWNTs as an ideal one dimensional material are carboxyl-functionalized to make the pH sensor show high sensitivity and outstanding flexibility for practical applications. • DEP technique is used to manipulate and position SWNTs into appropriate locations and desired formations to improve the metal-nanotube interface and highly rapid detection of pH value, resulting in better overall device performance. • Mechanical bendability of the pH sensor, which arises from the combination of flexible PET substrates and SWNTs, offer a significant improvement for applications that are difficult or impossible to achieve with traditional sensors on rigid substrates. - Abstract: The detection and control of the pH is very important in many biomedical and chemical reaction processes. A miniaturized flexible pH sensor that is light weight, robust, and conformable is very important in many applications, such as multifunctional lab-on-a-chip systems or wearable biomedical devices. In this work, we demonstrate a flexible chemiresistive pH sensor based on dielectrophoresis (DEP) aligned carboxyl-functionalized single-walled carbon nanotubes (SWNTs). Decorated carboxyl groups can react with hydrogen (H"+) and hydroxide (OH"−) ions, enabling the sensor to be capable of sensing the pH. DEP is used to deposit well-organized and highly aligned SWNTs in desired locations, which improves the metal-nanotube interface and highly rapid detection of the pH, resulting in better overall device performance. When pH buffer solutions are dropped onto such SWNTs, the H"+ and OH"− ions caninteract with the carboxyl groups and affect the generation of holes and electrons in the SWNTs, leading to resistance variations in the SWNTs. The results shows that the

High performance flexible pH sensor based on carboxyl-functionalized and DEP aligned SWNTs

Energy Technology Data Exchange (ETDEWEB)

Liu, Lu; Shao, Jinyou, E-mail: jyshao@mail.xjtu.edu.cn; Li, Xiangming; Zhao, Qiang; Nie, Bangbang; Xu, Chuan; Ding, Haitao

2016-11-15

Highlights: • The flexible chemiresistive pH sensor based on two-terminal microsensors eliminating the need for a reference electrode, is simple in structure and can be fabricated on a variety of substrates such as PET, PI and PVC. • SWNTs as an ideal one dimensional material are carboxyl-functionalized to make the pH sensor show high sensitivity and outstanding flexibility for practical applications. • DEP technique is used to manipulate and position SWNTs into appropriate locations and desired formations to improve the metal-nanotube interface and highly rapid detection of pH value, resulting in better overall device performance. • Mechanical bendability of the pH sensor, which arises from the combination of flexible PET substrates and SWNTs, offer a significant improvement for applications that are difficult or impossible to achieve with traditional sensors on rigid substrates. - Abstract: The detection and control of the pH is very important in many biomedical and chemical reaction processes. A miniaturized flexible pH sensor that is light weight, robust, and conformable is very important in many applications, such as multifunctional lab-on-a-chip systems or wearable biomedical devices. In this work, we demonstrate a flexible chemiresistive pH sensor based on dielectrophoresis (DEP) aligned carboxyl-functionalized single-walled carbon nanotubes (SWNTs). Decorated carboxyl groups can react with hydrogen (H{sup +}) and hydroxide (OH{sup −}) ions, enabling the sensor to be capable of sensing the pH. DEP is used to deposit well-organized and highly aligned SWNTs in desired locations, which improves the metal-nanotube interface and highly rapid detection of the pH, resulting in better overall device performance. When pH buffer solutions are dropped onto such SWNTs, the H{sup +} and OH{sup −} ions caninteract with the carboxyl groups and affect the generation of holes and electrons in the SWNTs, leading to resistance variations in the SWNTs. The results

Målstyring udfordrer lærerenes sociale talent

DEFF Research Database (Denmark)

Mellon, Karsten

2014-01-01

Lærere er talentfulde, når det gælder sociale relationer. Socialt talent skal dog ikke ses som en medfødt egenskab eller et resultat af flid og hård træning, snarere som evnen til vilje, kritisk forholden og mentalisering.......Lærere er talentfulde, når det gælder sociale relationer. Socialt talent skal dog ikke ses som en medfødt egenskab eller et resultat af flid og hård træning, snarere som evnen til vilje, kritisk forholden og mentalisering....

DEP-On-Go for Simultaneous Sensing of Multiple Heavy Metals Pollutants in Environmental Samples

Directory of Open Access Journals (Sweden)

Madhu Biyani

2016-12-01

Full Text Available We describe a simple and affordable “Disposable electrode printed (DEP-On-Go” sensing platform for the rapid on-site monitoring of trace heavy metal pollutants in environmental samples for early warning by developing a mobile electrochemical device composed of palm-sized potentiostat and disposable unmodified screen-printed electrode chips. We present the analytical performance of our device for the sensitive detection of major heavy metal ions, namely, mercury, cadmium, lead, arsenic, zinc, and copper with detection limits of 1.5, 2.6, 4.0, 5.0, 14.4, and, 15.5 μg·L−1, respectively. Importantly, the utility of this device is extended to detect multiple heavy metals simultaneously with well-defined voltammograms and similar sensitivity. Finally, “DEP-On-Go” was successfully applied to detect heavy metals in real environmental samples from groundwater, tap water, house dust, soil, and industry-processed rice and noodle foods. We evaluated the efficiency of this system with a linear correlation through inductively coupled plasma mass spectrometry, and the results suggested that this system can be reliable for on-site screening purposes. On-field applications using real samples of groundwater for drinking in the northern parts of India support the easy-to-detect, low-cost (<1 USD, rapid (within 5 min, and reliable detection limit (ppb levels performance of our device for the on-site detection and monitoring of multiple heavy metals in resource-limited settings.

Dynamic changes in the expression of DEP-1 and other PDGF receptor-antagonizing PTPs during onset and termination of neointima formation.

Science.gov (United States)

Kappert, Kai; Paulsson, Janna; Sparwel, Jan; Leppänen, Olli; Hellberg, Carina; Ostman, Arne; Micke, Patrick

2007-02-01

Growth factor-dependent tissue remodeling, such as restenosis, is believed to be predominantly regulated by changes in expression of receptor-tyrosine-kinases (RTKs) and their ligands. As endogenous antagonists of RTKs, protein-tyrosine-phosphatases (PTPs) are additional candidate regulators of these processes. Using laser-capture-microdissection and quantitative RT-polymerase chain reaction (qRT-PCR), we investigated the layer-specific expression of the four platelet-derived growth factor (PDGF) isoforms, the PDGF-alpha and beta receptors, and five PTPs implied in control of PDGF-receptor signaling 8 and 14 days after balloon injury of the rat carotid. Results were correlated with analyses of PDGF-beta receptor phosphorylation and vascular smooth muscle cell (VSMC) proliferation in vivo. The expression levels of all components, as well as receptor activation and VSMC proliferation, showed specific changes, which varied between media and neointima. Interestingly, PTP expression--particularly, DEP-1 levels--appeared to be the dominating factor determining receptor-phosphorylation and VSMC proliferation. In support of these findings, cultured DEP-1(-/-) cells displayed increased PDGF-dependent cell signaling. Hyperactivation of PDGF-induced signaling was also observed after siRNA-down-regulation of DEP-1 in VSMCs. The results indicate a previously unrecognized role of PDGF-receptor-targeting PTPs in controlling neointima formation. In more general terms, the observations indicate transcriptional regulation of PTPs as an important mechanism for controlling onset and termination of RTK-dependent tissue remodeling.

Depósito de agua para la exposición universal de Roma

Directory of Open Access Journals (Sweden)

Colosimo, Roberto

1964-06-01

Full Text Available As part of the general water services for the Universal Exhibition in Rome, an elevated tank has been built, which will meet all the water requirements of this Exhibition, and constitutes one of its outstanding landmarks. The structure of the water tank is reinforced concrete. The central stem, containing the pipes, stairs and lifts, extends through the tank itself and ends in a circular central spillway. The shape of the tank is very original, and has made it possible to fit into it an observation balcony, where a bar or restaurant can also be installed. The sloping supports withstand the horizontal thrusts due to wind pressure. The weight of the water is taken up by a circular ring, from which eight cantilever beams extend inwards. These do not reach to the centre, as this space is taken up with the services. The foundation consists of a circular slab, made of concrete, in the shape of truncated cone, 28.5 m diam. at the bottom, and 27.2 m at the top, and is 2.3 m thick. This slab rests on 301 piles. The water tank rises to a height of 51 m and can hold 2,500 m3 of water. It is absolutely watertight.Dentro del plan general hidráulico realizado por el señor Colosimo para la exposición Universal de Roma, y como remate del mismo, se ha construido este depósito elevado, destinado a cubrir las necesidades totales del recinto. La estructura es de hormigón armado. El núcleo central, que contiene las canalizaciones, escaleras y ascensores, se prolonga en el interior del depósito propiamente dicho y termina formando una cuneta anular que sirve de rebosadero. La forma particularmente original de la, copa, ha permitido crear un mirador en el que se podrá instalar un bar o restaurante. Los soportes oblicuos absorben los esfuerzos horizontales que crea el efecto del viento. La carga hidrostática, que origina el agua es resistida por un anillo circular del cual parten ocho ménsulas que no se han podido prolongar en el interior del cuerpo central

Estudio de la concentración microbiana del aire en depósitos del Archivo Nacional de Cuba

Directory of Open Access Journals (Sweden)

Sofía Flavia Borrego Alonso

2010-09-01

Full Text Available Actualmente el estudio de la microbiota en ambientes interiores es de interés para los especialistas, pues los microorganismos pueden provocar afectaciones a la salud de las personas y causar el biodeterioro de colecciones valiosas. Los objetivos del trabajo fueron: determinar la concentración microbiana del aire en depósitos del Archivo Nacional de Cuba, realizar la identificación taxonómica de los hongos aislados y definir el riesgo potencial que ellos representan para el biodeterioro del patrimonio documental y la salud del personal. El muestreo microbiológico se realizó en verano e invierno y en 6 depósitos, empleando un método de sedimentación. Para aislar hongos y bacterias se emplearon placas de Petri con medios de cultivo adecuados que se colocaron por triplicado a 3m de altura. Se determinó cualitativamente la actividad celulolítica, la producción de pigmentos y de ácidos a los hongos aislados. La microbiota viable total fue mayor en invierno que en verano, siendo la concentración bacteriana significativamente superior en esta estación (sequía en tanto que la fúngica es más elevada en verano. Los géneros fúngicos que predominaron en invierno fueron Aspergillus, Cladosporium, Penicillium, Curvularia y Alternaria, mientras que en verano prevaleció Cladosporium y se aislaron los géneros Fusarium, Mucor y Chrysonilia que llegaron a alcanzar niveles significativos en algunos depósitos. Los hongos aislados degradaron celulosa, produjeron pigmentos y ácidos. Asimismo, se evidenció que pueden provocar estados alérgicos y enfermedades respiratorias a las personas. Con relación a las bacterias del aire, predominaron las Gram positivas y se identificaron los géneros Enterobacter, Hafnia, Serratia, Streptomyces, Bacillus, Streptococcus y Staphylococcus. De igual manera, se detectó que las bacterias identificadas son capaces de producir afectaciones a la salud del personal.

AhR-dependent secretion of PDGF-BB by human classically activated macrophages exposed to DEP extracts stimulates lung fibroblast proliferation

Energy Technology Data Exchange (ETDEWEB)

Jaguin, Marie [UMR INSERM U1085, Institut de Recherche sur la Santé, l' Environnement et le Travail (IRSET), Université de Rennes 1, 2 Avenue du Pr Léon Bernard, 35043 Rennes Cedex (France); Fardel, Olivier [UMR INSERM U1085, Institut de Recherche sur la Santé, l' Environnement et le Travail (IRSET), Université de Rennes 1, 2 Avenue du Pr Léon Bernard, 35043 Rennes Cedex (France); Pôle Biologie, Centre Hospitalier Universitaire (CHU) Rennes, 2 rue Henri Le Guilloux, 35033 Rennes Cedex (France); Lecureur, Valérie, E-mail: valerie.lecureur@univ-rennes1.fr [UMR INSERM U1085, Institut de Recherche sur la Santé, l' Environnement et le Travail (IRSET), Université de Rennes 1, 2 Avenue du Pr Léon Bernard, 35043 Rennes Cedex (France)

2015-06-15

Lung diseases are aggravated by exposure to diesel exhaust particles (DEPs) found in air pollution. Macrophages are thought to play a crucial role in lung immune response to these pollutants, even if the mechanisms involved remain incompletely characterized. In the present study, we demonstrated that classically and alternative human macrophages (MΦ) exhibited increased secretion of PDGF-B in response to DEP extract (DEPe). This occurred via aryl hydrocarbon receptor (AhR)-activation because DEPe-induced PDGF-B overexpression was abrogated after AhR expression knock-down by RNA interference, in both M1 and M2 polarizing MΦ. In addition, TCDD and benzo(a)pyrene, two potent AhR ligands, also significantly increased mRNA expression of PDGF-B in M1 MΦ, whereas some weak ligands of AhR did not. We next evaluated the impact of conditioned media (CM) from MΦ culture exposed to DEPe or of recombinant PDGF-B onto lung fibroblast proliferation. The tyrosine kinase inhibitor, AG-1295, prevents phosphorylations of PDGF-Rβ, AKT and ERK1/2 and the proliferation of MRC-5 fibroblasts induced by recombinant PDGF-B and by CM from M1 polarizing MΦ, strongly suggesting that the PDGF-BB secreted by DEPe-exposed MΦ is sufficient to activate the PDGF-Rβ pathway of human lung fibroblasts. In conclusion, we demonstrated that human MΦ, whatever their polarization status, secrete PDGF-B in response to DEPe and that PDGF-B is a target gene of AhR. Therefore, induction of PDGF-B by DEP may participate in the deleterious effects towards human health triggered by such environmental urban contaminants. - Highlights: • PDGF-B expression and secretion are increased by DEPe exposure in human M1 and M2 MΦ. • DEPe-induced PDGF-B expression is aryl-hydrocarbon-dependent. • DEPe-exposed M1 MΦ secrete sufficient PDGF-B to increase lung fibroblast proliferation.

The Dutch Cannabis Dependence (CanDep) study on the course of frequent cannabis use and dependence: objectives, methods and sample characteristics

NARCIS (Netherlands)

van der Pol, P.; Liebregts, N.; de Graaf, R.; Korf, D.J.; van den Brink, W.; van Laar, M.

2011-01-01

This paper presents an overview of the prospective cohort design of the Dutch Cannabis Dependence (CanDep) study, which investigates (i) the three-year natural course of frequent cannabis use (≥ three days per week in the past 12 months) and cannabis dependence; and (ii) the factors involved in the

DEPUTY: analysing architectural structures and checking style

International Nuclear Information System (INIS)

Gorshkov, D.; Kochelev, S.; Kotegov, S.; Pavlov, I.; Pravilnikov, V.; Wellisch, J.P.

2001-01-01

The DepUty (dependencies utility) can be classified as a project and process management tool. The main goal of DepUty is to assist by means of source code analysis and graphical representation using UML, in understanding dependencies of sub-systems and packages in CMS Object Oriented software, to understand architectural structure, and to schedule code release in modularised integration. It also allows a new-comer to more easily understand the global structure of CMS software, and to void circular dependencies up-front or re-factor the code, in case it was already too close to the edge of non-maintainability. The authors will discuss the various views DepUty provides to analyse package dependencies, and illustrate both the metrics and style checking facilities it provides

Amiloidosis renal hereditaria por depósito de apolipoproteína AI: un reto diagnóstico

Directory of Open Access Journals (Sweden)

Kelly del Rocío Samillán-Sosa

2015-05-01

La amiloidosis por depósito de Apo AI progresa a enfermedad renal crónica terminal en el plazo de de 3 a 15 años. Se diferencia clínicamente de la amiloidosis AL por su menor afectación extrarrenal y su mejor pronóstico. El trasplante renal ofrece una supervivencia del injerto aceptable y el trasplante hepato-renal se podría tener en cuenta en pacientes con disfunción significativa de ambos órganos.

Avaliação geoestatística do depósito estano-tungstenífero relacionado ao Maciço Granítico Correas-Ribeirão Branco-SP

OpenAIRE

José Maximino Tadeu Miras Ferron

2000-01-01

Esta dissertação apresenta os resultados de um estudo geoestatístico realizado sobre os dados de pesquisa em um depósito estano-tungstenífero relacionado ao Maciço Granítico Correas, localizado no Município de Ribeirão Branco - SP. Este depósito mineral foi intensivamente pesquisado pela Mineração Taboca S.A., em cooperação com o Instituto de Pesquisas Tecnológicas do Est. de São Paulo - IPT. Cerca de 5000 metros de sondagem rotativa a diamante foram realizados resultando na descoberta de sei...

Evaluación preliminar de depósitos de estériles y sedimentos provenientes de la actividad carbonífera en Río Turbio

Directory of Open Access Journals (Sweden)

Alba Lucia Caballero

2014-06-01

Full Text Available A lo largo de décadas de actividad carbonífera en la cuenca de Río Turbio ubicada al sudoeste de la provincia de Santa Cruz en la República Argentina, se ha generado una serie de pasivos ambientales entre los cuales se encuentran los depósitos de material estéril denominados escombreras, las piletas de lodos y los sedimentos del curso de agua receptor de efluentes, el arroyo San José. La presencia de estos pasivos, ha ocasionado en distintas partes del mundo complicaciones debido a la naturaleza ácida de las escorrentías que afectan directamente fuentes de agua, superficiales y subterráneas, localizadas en la vecindad de dichos depósitos. El problema se produce cuando dicha acidez no puede ser neutralizada, lo cual ocasiona la generación de lixiviados de metales pesados en las escombreras o redisolución de los que se encuentran depositados como sedimentos en los cursos superficiales. Por tal motivo en este trabajo se realiza una evaluación preliminar del contenido metálico de los depósitos de estériles y de los sedimentos del arroyo San José y de la capacidad de generación ácida de los primeros. Se pretende con ello obtener una información básica que permita un diseño experimental científico para caracterizar dichos depósitos y evaluar el impacto que están produciendo. Como conclusión se pudo corroborar la hipótesis inicial de existencia de contenido metálico en escombreras y sedimentos y un potencial neto de generación ácida de las primeras. Además se determinó la necesidad de investigar el origen de altos contenidos metálicos en sedimentos de zonas alejadas de la producción.

Efecto del V y el Si Sobre la Microestructura de Depósitos Realizados con Electrodos Tubulares Revestidos de Alto Contenido de Mn (Hadfield

Directory of Open Access Journals (Sweden)

Manuel Rodríguez

2017-10-01

Full Text Available Resumen: Las aleaciones para el relleno superficial Fe-Mn-C (Hadfield han demostrado una excelente resistencia al desgaste bajo altas cargas dinámicas. En los últimos años se han realizado numerosos estudios para aumentar la resistencia al desgaste y mejorar su desempeño, a través de la introducción de otros elementos de aleación. En el presente trabajo se investiga la microestructura y dureza de los depósitos de relleno con alto contenido de Mn y adiciones de 1.2% de V y 2.4% de Si. Los depósitos estudiados se realizaron utilizando electrodos tubulares revestidos fabricados a escala de laboratorio. Las fases y microconstituyentes en el metal depositado se identificaron mediante microscopía óptica (MO, electrónica de barrido (MEB, difracción de rayos X (DRX, dureza y microdureza. De acuerdo a los resultados obtenidos, la adición de V al sistema aleante originó que la fase predominante fuera la austenita. Además, contribuyó a la formación de carburos de vanadio (VC en la microestructura de la capa de relleno, sin observarse la presencia de carburos complejos. Por otra parte, la presencia de Si favoreció la formación de una red de ferrita interdendrítica. La adición de estos elementos de aleación mejoró las propiedades de estos depósitos, potencializando su uso en aplicaciones que requieren alta resistencia al desgaste bajo altas cargas.

Prácticas de sacrificio en el Cerro de la Mesa (Alcolea de Tajo, Toledo: el depósito ritual de la Casa 1

Directory of Open Access Journals (Sweden)

Ana CABRERA DÍEZ

2014-06-01

Full Text Available Los depósitos con restos óseos animales enterrados bajo el pavimento en ámbitos domésticos forman parte de prácticas rituales bien conocidas en la Protohistoria peninsular, tradicionalmente asociadas a la fundación o remodelación de nuevos edificios o a ritos vinculados a la propiciación y la fertilidad. Aunque los ejemplos mejor estudiados se encuentran en la zona levantina, el fenómeno también se conoce en yacimientos del interior. Este artículo tiene por objeto presentar un depósito ritual excavado en el poblado vetón del Cerro de la Mesa, en el valle medio del Tajo, cuyas características formales lo emparentan con las ofrendas domésticas de la zona ibérica. Se trata de un hoyo situado en el umbral de la Casa 1, que contiene los restos seleccionados de varios ovinos y un pequeño cuenco cerámico colocado en posición invertida. El análisis de los restos óseos, el contenido del cuenco y el estudio del contexto arqueológico en que se situaba el depósito han permitido relacionarlo con prácticas de sacrificio y libación dentro del marco de la religiosidad vetona. Este trabajo pretende igualmente contribuir a la formación de un corpus peninsular de inhumaciones rituales de animales en contextos domésticos, que impulse el adecuado estudio de la ritualidad protohistórica.

Ozone Enhances Diesel Exhaust Particles (DEP-Induced Interleukin-8 (IL-8 Gene Expression in Human Airway Epithelial Cells through Activation of Nuclear Factors- κB (NF-κB and IL-6 (NF-IL6

Directory of Open Access Journals (Sweden)

James Kelley

2005-12-01

Full Text Available Ozone, a highly reactive oxidant gas is a major component of photochemical smog. As an inhaled toxicant, ozone induces its adverse effects mainly on the lung. Inhalation of particulate matter has been reported to cause airway inflammation in humans and animals. Furthermore, epidemiological evidence has indicated that exposure to particulate matter (PM2.5-10, including diesel exhaust particles (DEP has been correlated with increased acute and chronic respiratory morbidity and exacerbation of asthma. Previously, exposure to ozone or particulate matter and their effect on the lung have been addressed as separate environmental problems. Ozone and particulate matter may be chemically coupled in the ambient air. In the present study we determined whether ozone exposure enhances DEP effect on interleukin-8 (IL-8 gene expression in human airway epithelial cells. We report that ozone exposure (0.5 ppm x 1 hr significantly increased DEP-induced IL-8 gene expression in A549 cells (117 ± 19 pg/ml, n = 6, p < 0.05 as compared to cultures treated with DEP (100 μg/ml x 4 hr alone (31 ± 3 pg/ml, n = 6, or cultures exposed to purified air (24 ± 6 pg/ml, n = 6. The increased DEP-induced IL-8 gene expression following ozone exposure was attributed to ozone-induced increase in the activity of the transcription factors NF-κB and NF-IL6. The results of the present study indicate that ozone exposure enhances the toxicity of DEP in human airway epithelial cells by augmenting IL-8 gene expression, a potent chemoattractant of neutrophils in the lung.

Decreto 36/1991, de 1 de febrero, por el que se establecen las normas que regulan el funcionamiento del Depósito Legal en Galicia

OpenAIRE

Galicia

1991-01-01

Son objeto de depósito legal todos los escritos, estampas, imágenes y composiciones musicales producidos en Galicia en ejemplares múltiples con fines de difusión, hechos por procedimientos mecánicos, químicos o de cualquier otra naturaleza.

Depósito elevado de hormigón armado, Argentina

Directory of Open Access Journals (Sweden)

Editorial, Equipo

1965-03-01

Full Text Available The firm S. A. D. E., near Buenos Aires (Argentina, has built an elevated tank, with a capacity of 80 m3, at 21 m height, to supply water to its large industrial installations. The tank is of reinforced concrete. It is shaped as a circular, rather shallow cup, which is subdivided into four compartments, connected in symmetrical pairs with respect to the central axis. This ensures a weight balance when it is filled and emptied. This tank is of interest because of its method of construction, and the prefabrication procedure adopted. The supporting stem is a hollow cylinder, made of prefabricated sections, each 1.60 m long. At the bottom there is a circular slab, which rests on four cylindrical concrete, prefabricated piles, each 15 m long. The system of control valves is placed below the slab. Ascent to the top part is by means of a spiral staircase, whose steps are attached to the stem. To increase its stability, six metal rods, 7.5 cm in diameter, have been added to the cylindrical stem, and the handrail for the steps has been conveniently attached to these. The side thrusts due to wind forces acting on the tank are withstood by means of six radial beams, 5 m in length.Para abastecer de agua a un gran conjunto industrial que construye la Empresa S. A. D. E. cerca de Buenos Aires (Argentina, se ha construido un depósito elevado, de 80 m3 de capacidad y 21 m de altura. La cubeta, de hormigón armado, tiene la forma de una copa aplanada de planta circular y se ha subdividido en cuatro compartimientos comunicados dos a dos, simétricos respecto al eje vertical, con objeto de conservar el equilibrio de cargas durante las operaciones de carga y vaciado. La particularidad de este depósito consiste en su método constructivo y en los procedimientos de prefabricación empleados. El fuste o soporte único central es un cilindro hueco, formado por trozos prefabricados, de 1,60 m de longitud. El de base se apoya sobre una losa circular —que descansa

The Kimberley Assessment of Depression of Older Indigenous Australians: Prevalence of Depressive Disorders, Risk Factors and Validation of the KICA-dep Scale

Science.gov (United States)

Almeida, Osvaldo P.; Flicker, Leon; Fenner, Stephen; Smith, Kate; Hyde, Zoe; Atkinson, David; Skeaf, Linda; Malay, Roslyn; LoGiudice, Dina

2014-01-01

Objective This study aimed to develop a culturally acceptable and valid scale to assess depressive symptoms in older Indigenous Australians, to determine the prevalence of depressive disorders in the older Kimberley community, and to investigate the sociodemographic, lifestyle and clinical factors associated with depression in this population. Methods Cross-sectional survey of adults aged 45 years or over from six remote Indigenous communities in the Kimberley and 30% of those living in Derby, Western Australia. The 11 linguistic and culturally sensitive items of the Kimberley Indigenous Cognitive Assessment of Depression (KICA-dep) scale were derived from the signs and symptoms required to establish the diagnosis of a depressive episode according to the DSM-IV-TR and ICD-10 criteria, and their frequency was rated on a 4-point scale ranging from ‘never’ to ‘all the time’ (range of scores: 0 to 33). The diagnosis of depressive disorder was established after a face-to-face assessment with a consultant psychiatrist. Other measures included sociodemographic and lifestyle factors, and clinical history. Results The study included 250 participants aged 46 to 89 years (mean±SD = 60.9±10.7), of whom 143 (57.2%) were women. The internal reliability of the KICA-dep was 0.88 and the cut-point 7/8 (non-case/case) was associated with 78% sensitivity and 82% specificity for the diagnosis of a depressive disorder. The point-prevalence of a depressive disorder in this population was 7.7%; 4.0% for men and 10.4% for women. Heart problems were associated with increased odds of depression (odds ratio = 3.3, 95% confidence interval = 1.2,8.8). Conclusions The KICA-dep has robust psychometric properties and can be used with confidence as a screening tool for depression among older Indigenous Australians. Depressive disorders are common in this population, possibly because of increased stressors and health morbidities. PMID:24740098

The Kimberley assessment of depression of older Indigenous Australians: prevalence of depressive disorders, risk factors and validation of the KICA-dep scale.

Directory of Open Access Journals (Sweden)

Osvaldo P Almeida

Full Text Available OBJECTIVE: This study aimed to develop a culturally acceptable and valid scale to assess depressive symptoms in older Indigenous Australians, to determine the prevalence of depressive disorders in the older Kimberley community, and to investigate the sociodemographic, lifestyle and clinical factors associated with depression in this population. METHODS: Cross-sectional survey of adults aged 45 years or over from six remote Indigenous communities in the Kimberley and 30% of those living in Derby, Western Australia. The 11 linguistic and culturally sensitive items of the Kimberley Indigenous Cognitive Assessment of Depression (KICA-dep scale were derived from the signs and symptoms required to establish the diagnosis of a depressive episode according to the DSM-IV-TR and ICD-10 criteria, and their frequency was rated on a 4-point scale ranging from 'never' to 'all the time' (range of scores: 0 to 33. The diagnosis of depressive disorder was established after a face-to-face assessment with a consultant psychiatrist. Other measures included sociodemographic and lifestyle factors, and clinical history. RESULTS: The study included 250 participants aged 46 to 89 years (mean±SD = 60.9±10.7, of whom 143 (57.2% were women. The internal reliability of the KICA-dep was 0.88 and the cut-point 7/8 (non-case/case was associated with 78% sensitivity and 82% specificity for the diagnosis of a depressive disorder. The point-prevalence of a depressive disorder in this population was 7.7%; 4.0% for men and 10.4% for women. Heart problems were associated with increased odds of depression (odds ratio = 3.3, 95% confidence interval = 1.2,8.8. CONCLUSIONS: The KICA-dep has robust psychometric properties and can be used with confidence as a screening tool for depression among older Indigenous Australians. Depressive disorders are common in this population, possibly because of increased stressors and health morbidities.

Características petrográficas e químicas das rochas encaixantes das mineralizações auríferas do depósito Lavra Velha (Região de Ibitiara, borda oeste da Chapada Diamantina, Bahia)

OpenAIRE

Carlin, Aline de Cassia [UNESP

2016-01-01

O depósito de ouro Lavra Velha, que pertence ao Alvo de Prospecção Lavra Velha, da empresa Yamana Gold, localiza-se na cidade de Ibitiara, centro-oeste do Estado da Bahia e borda oeste do domínio fisiográfico da Chapada Diamantina, situado no Aulacógeno do Paramirim, na região norte do Cráton São Francisco. O depósito foi recentemente inserido na classe de modelo IOCG (Iron Oxide Cooper Gold), onde a mineralização de ouro se hospeda em brechas hematíticas sericitizadas. O principal objetivo d...

Caracterización de comunidades microbianas asociadas a depósitos de minerales secundarios en tubos de lava y minas de agua

OpenAIRE

García-Sánchez, A. M.

2016-01-01

La presente tesis doctoral representa un trabajo multidisciplinar, donde confluyen diversas especialidades biológicas, geoquímicas y mineralógicas, mediante la realización de un estudio geomicrobiológico exhaustivo de los ambientes de estudio. Los objetivos específicos planteados son los siguientes: 1. Conocer la diversidad de comunidades microbianas subterráneas asociadas a depósitos de minerales secundarios recogidos en minas de agua excavadas en granito y tubos de lava de diferentes ...

Registro do Icnogênero Ophiomorpha Lundgreen, 1891 em Depósitos da Planície Costeira (Quaternário (Quaternário do Estado do Rio de Janeiro.

Directory of Open Access Journals (Sweden)

Rommulo Mendes Carvalho Barreiro

2007-07-01

Full Text Available A região dos Lagos Fluminenses, localizadano litoral norte do estado do Rio de Janeiro registradiversos episódios sedimentares relacionados com avariação do nível do mar ocorrida durante o Holoceno.Os depósitos variam desde intervalos pelíticos comcoquinas subordinadas, datados de 5.100 anos A.P. atéareias de cristas de praia com idade provavelmentemais recente. Este trabalho tem como finalidadeassinalar estes icnitos, em depósitos holocênicos dolitoral norte do estado do Rio de Janeiro, contribuindoassim com o conhecimento do registro fossílifero,pouco estudado no local. Na localidade de Fazendada Barra, município de Casimiro de Abreu, entre abase do Morro de São João e a margem esquerda doRio São João, ocorrem pacotes de arenitos maciçoscom contribuição de argila, de coloração castanhae espessura até 2m, laminação plano-paralela etroncos fossilizados. Nestes depósitos destacam-seestruturas sedimentares de preenchimento (casts,identificadas no icnogênero Ophiomorpha. Estematerial consiste de dezoito fragmentos de bastõesde composição argilosa. O sedimento é similarao depósitado no interior de tubos de crustáceos,provavelmente pertencentes ao gênero Callichirus.Os tubos são produzidos por bioturbação, comfinalidades de habitação e alimentação, sendo,portanto, classificados etologicamente comoFodinichnia. É um dos icnofósseis mais conhecidosao longo do registro geológico, e muito utilizadocomo indicador paleoambiental. Ocorrem emsubstratos inconsolidados do tipo softground,em ambientes rasos de inframaré. É o primeiroregistro de icnofósseis por bioturbação encontradona região. A presença de icnofósseis representa aexistência de organismos na paleocomunidade, quenão se preservaram na tafocenose, contribuindo cominformações paleoecológicas e paleoambientaispara o conhecimento da evolução costeira do nortedo Estado do Rio de Janeiro. Ademais, é possívelcorrelacionar estas estruturas com a

Gasto energético e medidas antropométricas de novas usuárias do contraceptivo injetável trimestral de acetato de medroxiprogesterona de depósito

Directory of Open Access Journals (Sweden)

Priscilla de Nazaré Silva dos SANTOS

2015-10-01

Full Text Available Objetivo:Avaliar o gasto energético e as medidas antropométricas de mulheres durante o primeiro ano de uso do método contraceptivo de acetato de medroxiprogesterona de depósito.Métodos:Estudo prospectivo com grupo de comparação. Foram incluídas mulheres saudáveis, não obesas, nunca usuárias de acetato de medroxiprogesterona de depósito e sem antecedentes que pudessem contribuir para a variação do peso corporal; foram distribuídas em dois grupos, 28 usuárias de acetato de medroxiprogesterona e 24 usuárias de dispositivo intrauterino de cobre, pareadas por idade (±1 ano e índice de massa corporal (kg/m2. As variáveis estudadas foram sociodemográficas (idade, etnia, tabagismo, etilismo, atividade física, classe econômica e escolaridade, peso (kg, índice de massa corporal, gasto energético basal e total, medidas de circunferência de cintura e quadril (cm e relação cintura-quadril.Resultados:A idade das mulheres variou de 20-39 anos. As médias de idade/índice de massa corporal foram 29,6 (DP=±5,2 anos/23,9 (±3,6 kg/m2, no grupo de acetato de medroxiprogesterona de depósito, e de 28,6 (DP=±5,2 anos/ 24,5 (±2,7 kg/m2, no grupo de dispositivo intrauterino de cobre. Após análise de variância para medidas repetidas, as usuárias de acetato de medroxiprogesterona de depósito apresentaram ganho de 2,2 kg no peso corporal e de -0,2 kg no grupo do dispositivo intrauterino de cobre, sem diferença estatisticamente significativa entre eles. Não houve discrepância nas demais variáveis estudadas.Conclusão:Mulheres saudáveis e jovens não apresentaram mudança no peso, nas medidas e nos gastos energéticos durante o primeiro ano de uso do contraceptivo acetato de medroxiprogesterona. A orientação em relação aos hábitos saudáveis de vida e o monitoramento de medidas são importantes para o controle do peso corporal em usuárias de métodos contraceptivos.

Los depósitos metálicos burgaleses y la metalurgia del Bronce Final en la Cuenca del Duero: algunas reflexiones

OpenAIRE

Fernández Manzano, Julio; Herrán Martínez, José Ignacio; Rovira Llorens, Salvador

2005-01-01

El Bronce Final en la Meseta Norte española está protagonizado, por un lado, por yacimientos de tipo Cogotas I y, por otro, por la presencia de depósitos metálicos de bronce, sistemáticamente localizados sin contexto arqueológico. En el presente trabajo se plantea la probabilidad de que gran parte de estos bronces fueron moldeados por gentes Cogotas I. Se defiende asimismo que algunos de ellos se fundieron en un horizonte cultural más avanzado -Soto de Medinilla-, ya de los inicios de la Edad...

Suelos agrícolas contaminados por metales pesados provenientes de depósitos de vehículos de desecho

OpenAIRE

Miguel Ángel Balderas-Plata

2003-01-01

El propósito de este trabajo fue determinar el grado de contaminación por metales pesados provenientes de depósitos de vehículos de desecho en suelos agrícolas que se encuentran en la periferia de éstos. Las muestras de suelo (0 a 10 y 10 a 30 cm de profundidad) se tomaron a lo largo de un trayecto a intervalos regulares de 5 m, hasta una distancia de 25 m. Se observó que en el suelo estudiado, en el ejido de San Gabriel Jilotepec (ESAJ), los contenidos de Cd, Cu, Cr, Ni, Pb y Zn presentan un...

Inactivation of genes encoding extracellular proteases in bacillus halodurans BhFC01 and the impact on its modified flagellin type III secretion pathway towards improving peptide expression

CSIR Research Space (South Africa)

Berger, E

2009-01-01

Full Text Available The flagellin type III secretion pathway of Bacillus halodurans BhFC01 (-hag) was modified by the inactivation of fliD. An in-frame flagellin gene fusion polypeptide construct was expressed, and the heterologous peptides were secreted as flagellin...

Nuevas vías de depósito, nuevos proyectos: consolidación del repositorio institucional RODERIC

Directory of Open Access Journals (Sweden)

Barrueco, José Manuel

2013-12-01

Full Text Available El objetivo de este artículo es dar a conocer los nuevos proyectos del repositorio institucional de la Universitat de València, RODERIC, así como las nuevas vías de depósito de documentos de investigación. Para ello, se analizan las distintas actuaciones dentro del apartado de investigación del repositorio. En primer lugar, las centradas en el área de revistas editadas en la UV, los proyectos sobre digitalización de tesis retrospectivas y publicación de tesis corrientes, y finalmente la integración del sistema CRIS con el repositorio. Se acaba con la descripción de una serie de mejoras que se preveen están disponibles en la segunda mitad de año.

Juntas de contracción en canales y depósitos de agua

Directory of Open Access Journals (Sweden)

Safránez, Carlos

1977-12-01

Full Text Available In view of the lack of Information available on the subject of contraction joints in canals and water tanks, and this being of great importance for water-tightness in this type of construction, the data considered as essential for planning joints has been presented in a systematic way. The most common of joints, and their characteristics, are mentioned and listed in accordance with their design and the procedure used for sealing them. The great importance of joint design and dimensions in relation to their performance has been highlighted. In the projects carried out, referring to this type of joint, we see there is a lack of common criteria regarding the minimum requisites and conditions which the joints must have in order to duly fulfill their mission. Experience has proven that the results obtained with contraction joints in canals and water tanks have not been totally satisfactory. In a large number of cases, bothersome and costly repairs were necessary to overercome deficiencies observed. In order to improve this situation, the different factors which influence the contraction joint's performance are discussed and they should be taken into account when planning the joints and their dimensions, in order to insure greatest efficiency.Vista la escasa información disponible sobre las juntas de contracción en canales y depósitos de agua, siendo indiscutible su gran importancia para la estanquidad de estas obras, se han expuesto, en forma sistemática, los datos considerados esenciales para enfocar debidamente el proyecto de las juntas. Se han indicado los tipos de juntas más corrientes, ordenadas de acuerdo con su diseño y con el procedimiento empleado para su sellado, señalando sus características. Se ha tratado de la importancia primordial del diseño y de las dimensiones de las juntas en relación con su comportamiento. En los proyectos de las juntas ejecutadas llama la atención la falta de una unidad de criterio sobre las

Depósito de agua 1.500 m3 en Getafe – España

Directory of Open Access Journals (Sweden)

del Pozo, Florencio

1970-02-01

Full Text Available Due to the redevelopment of the activities of the proprietor firm, and the consequent need to modify and extend the cooling water circuit of their plant, it has been necessary to construct an elevated water tank, with a minimum height of 30 m above the ground. This tank, whose description is given, is made of prestressed concrete, has no roofing surface, and its detailed characteristics as well as the method of construction are also briefly and clearly discussed in this article.Por exigencias y reestructuración de la empresa propietaria, que ha orientado en forma nueva la producción de sus talleres, ha sido necesario modificar y ampliar todo el circuito de agua de refrigeración, lo que ha obligado a construir un depósito de agua elevado, con cota mínima de + 30 m, de hormigón pretensado y sin cubierta, cuyas características, Ba cálculo y proceso constructivo se describen somera, pero claramente, en este artículo.

Caracterização faciológica e estratigráfica dos depósitos Flúvio-eólicos da Formação Pirambóia, permo-triássico da Bacia do Paraná, Oeste do Rio Grande

OpenAIRE

Adriana Damiani Rodrigues

2015-01-01

O objetivo principal desta dissertação é elaborar um arcabouço faciológico e estratigráfico para os depósitos flúvio-eólicos da Formação Pirambóia, Permo-Triássico da Bacia do Paraná, no bloco oeste do Estado do Rio Grande do Sul. O entendimento dos processos controladores da sedimentação e a relação entre os depósitos fluviais e eólicos foram fundamentais para estabelecer um modelo estratigráfico de alta resolução. A análise faciológica determinou 10 litofácies que foram agrupadas em seis as...

Diseño piloto del sistema de tratamiento pasivo de infiltraciones provenientes del depósito de material inadecuado de Minera La Zanja, Perú

OpenAIRE

Jurado Garayar, Dante Danilo

2016-01-01

El presente estudio denominado “Diseño piloto del sistema de tratamiento pasivo de infiltraciones provenientes del depósito de material inadecuado de Minera La Zanja, Perú” tiene como objetivo evaluar y seleccionar un piloto de sistema de tratamiento pasivo, para ello se identificará la zona de estudio, los materiales y especies vegetales con potencial para la implementación de este sistema de tratamiento. El método de investigación utilizado es el cualitativo y descriptivo (He...

Facies volcánicas del depósito de avalancha de detritos del volcán Tata Sabaya, Andes Centrales Volcanic facies of the debris avalanche deposit of Tata Sabaya Volcano, Central Andes

Directory of Open Access Journals (Sweden)

Benigno Godoy

2012-09-01

Full Text Available Las avalanchas de detritos, asociadas a colapsos parciales de edificios volcánicos, son fenómenos comunes en la evolución de un volcán. Este tipo de flujos son por inestabilidades, que pueden deberse a factores tales como la existencia de zonas afectadas por alteración hidrotermal, cambios climáticos, terremotos, intrusión de magmas en zonas superficiales (criptodomos y/o diques y/o movimiento de fallas bajo el edificio volcánico o cercanas a él. El producto final de estos flujos -denominado depósito de avalancha de detritos (DAD- presenta morfologías típicas de cerrillos y drenajes cerrados. En los Andes Centrales se han reconocido, al menos, 14 centros volcánicos con depósitos de avalancha asociados, entre los que está el volcán Tata Sabaya (Bolivia. El colapso que ha dado origen a este depósito podría haberse generado por una combinación de actividad sísmica y magmática en el volcán. El depósito asociado al colapso parcial de este volcán se distribuye sobre la parte baja del flanco sur del volcán y sobre la parte noroccidental de la cuenca del salar de Coipasa. Cubre una superficie de más de 230 km² y tiene un volumen estimado de 6±1 km³. Sobre la base de las composiciones litológicas, se ha establecido que el depósito está constituido por 6 tipos distintos de cerrillos, los cuales son: lávicos, piroclásticos, sedimentarios mixtos, brecha piroclástica y andesítico-basálticos. Considerando el tipo predominante de cerrillos y su distribución espacial dentro del depósito, se ha definido 6 facies diferentes (Facies de Bloques Toreva, Facies de Cerrillos Volcánicos, Facies Central, Facies de Cerrillos Sedimentarios, Facies Mixta y Facies de Cerrillos de Brecha Piroclástica. Tomando en cuenta la distribución espacial de estas facies, se propone la estructura del paleovolcán previa a su colapso parcial.Debris avalanches associated with partial sector collapse of volcanic edifices are common phenomena in the

Levantamento das espécies exóticas arbóreas e seu impacto nas espécies nativas em áreas adjacentes a depósitos de resíduos domiciliares

Directory of Open Access Journals (Sweden)

Otacílio Antunes Santana

2011-09-01

Full Text Available http://dx.doi.org/10.5007/2175-7925.2008v21n4p29 Os objetivos deste trabalho, em áreas adjacentes à deposição de resíduos domiciliares, foram: i realizar o levantamento das espécies exóticas, ii verificar o seu impacto nas espécies nativas arbóreas de Cerrado, e iii comparar os resultados com áreas controles. Vinte e duas espécies exóticas foram encontradas nas parcelas estudadas próximos aos depósitos de resíduos domiciliares, distribuídas entre treze famílias. Apenas duas espécies foram encontradas nas áreas controle. A presença de depósitos de resíduos domiciliares aumenta a incidência de espécies exóticas arbóreas, causando um gradiente na distribuição de seus indivíduos, padrão não observado nas áreas controles.

Cuaternario y geomorfología de Argentina : Distribución y características de los principales depósitos y rasgos geomorfológicos

OpenAIRE

Fuks, Enrique Eduardo; Pisano, María Florencia

2017-01-01

La necesidad de contar con información sobre la distribución y características de los depósitos cuaternarios de Argentina, los rasgos geomorfológicos que ellos representan y los procesos que los originaron, nos ha llevado a tratar de reunir en un sólo volumen estos aspectos que, en general, se presentan dispersos en publicaciones individuales, haciéndose muy difícil para el estudiante poder abarcarlos. En este sentido, textos de Geomorfología hay muchos y buenos, con diferentes ópticas y acce...

Algal wrack deposits and macroinfaunal arthropods on sandy beaches of the Chilean coast Depósitos de algas varadas y artrópodos macroinfaunales en playas de arena de la costa de Chile

Directory of Open Access Journals (Sweden)

EDUARDO JARAMILLO

2006-09-01

implications for sampling design of sandy beaches characterized by high inputs of algal wrack depositsSe muestrearon cuatro playas arenosas del litoral chileno durante el verano de 2000, para estudiar el rol de depósitos de algas varadas sobre las abundancias de las poblaciones de tres especies detritívoras de la macroinfauna que habita los niveles intermareales superiores de estas playas: el anfípodo talítrido Orchestoidea tuberculata Nicolet, el isópodo tílido Tylos spinulosus Dana y el insecto tenebriónido Phalerisidia maculata Kulzer. Las playas estudiadas fueron Apolillado (ca. 29º S, Quidico (ca. 38º S, Guabún y Mar Brava (ca. 42º S. Se recolectaron muestras replicadas con un cilindro plástico (25 cm de diámetro de los depósitos de algas, incluyendo el sedimento situado por debajo de los mismos y de zonas de la playa próximas a los acúmulos de algas pero carentes de las mismas. Las muestras se recolectaron en dos niveles de la playa, uno más próximo a la orilla con acúmulos de algas frescas y otro en la zona superior de la playa con algas secas. Los depósitos de algas varadas estuvieron compuestos principalmente por las algas pardas Macrocystis pyrifera (L., Durvillaea antarctica (Chamisso Hariot y Lessonia nigrescens Bory. O. tuberculata fue encontrada en los depósitos de algas y zonas de la playa cercanas a los mismos y estudiados en Apolillado, Quidico, Guabún y Mar Brava. Por otro lado, T. spinulosus fue recolectada solo en Apolillado, mientras que P. maculata ocurrió en los depósitos de algas y zonas de la playa cercanas a los mismos y analizados en Apolillado, Quidico y Guabún. En general, las abundancias medias de las tres especies fueron significativamente más altas en aquellas muestras recolectadas de los depósitos de algas y sedimentos subyacentes; i.e., 56, 61 y 14 veces más altas (promedios totales que en arenas sin restos de algas. Se concluye que las algas varadas sobre la superficie de la playa promueven un incremento de las

Optimal codes as Tanner codes with cyclic component codes

DEFF Research Database (Denmark)

Høholdt, Tom; Pinero, Fernando; Zeng, Peng

2014-01-01

In this article we study a class of graph codes with cyclic code component codes as affine variety codes. Within this class of Tanner codes we find some optimal binary codes. We use a particular subgraph of the point-line incidence plane of A(2,q) as the Tanner graph, and we are able to describe ...

Desenvolvimento de sistema de apoio com depósito cerâmico para soldagem e processamento por atrito com pino não consumível

Directory of Open Access Journals (Sweden)

Tiago F. A. Santos

2014-06-01

Full Text Available A mesa suporte das peças a serem unidas normalmente se deforma durante o processo de soldagem por atrito com pino não consumível devido às altas cargas envolvidas. Consequentemente, a obtenção de juntas soldadas com penetração total, bem como a vida útil da amostra e da ferramenta podem ser afetadas, causando paradas não programadas e comprometendo a produtividade do processo e deslocando mão de obra para uma etapa de manutenção não prevista na cadeia do processo de soldagem. Este trabalho apresenta uma mesa de apoio com depósito cerâmico para o processamento e soldagem por atrito com pino não consumível. Para o desenvolvimento da mesa foram testados quatro depósitos cerâmicos, sob uma placa de aço, dos quais o de menor porosidade atingiu melhor desempenho. Essa mesa permitiu a realização de juntas soldadas com penetração completa de aços inoxidáveis duplex; resistir às altas cargas durante a soldagem de aços baixa liga alta resistência e realizar juntas dissimilares aço-alumínio, sem aderência do material mais macio à mesa suporte; bem como outras importantes características como confinar o calor e o metal plastificado, assim como determinar parâmetros de soldagem estáveis.

Depósitos de escarnitos mineralizados em ferro e cobre do arco magmático de Santa Quitéria, Ceará, Provincia Borborema do nordeste do Brasil

Directory of Open Access Journals (Sweden)

Clovis Vaz Parente

Full Text Available Resumo Depósitos de escarnitos mineralizados em W-Mo da Província Borborema são conhecidos desde os anos 40. Entretanto, até a execução deste trabalho, não se tinha registros desses depósitos mineralizados em Fe-Cu. No Ceará, as primeiras ocorrências e/ou depósitos de escarnitos ricos em ferro e cobre foram identificadas recentemente no Arco Magmático Continental de Santa Quitéria, considerado produto de evolução de vários arcos magmáticos, variando de arco juvenil (870 - 800 Ma a colisão continental (625 - 600 Ma. Os escarnitos estão associados às rochas calcissilicáticas e mármores dolomíticos e/ou calcíticos, recortadas por quartzo monzonitos neoproterozóicos cedo a tardi-colisionais. São encontrados todos os tipos do sistema escarnítico como endoescarnitos, hornfels, escarnóides e exoescarnitos. Os exoescarnitos apresentam duas associações minerais, que refletem protólitos carbonáticos distintos: uma composta por clinopiroxênio-granada (estágio progradante e magnetita-pirrotita-calcopirita-pirita-biotita (estágio retrogradante, característica de protólito calcítico, e outra formada por olivina-espinélio-diopsidio na fase progradante e serpentina na fase retrogradante, representativa de protólito dolomítico. As granadas, em parte zonadas, exibem composição dominada por andradita (82 - 52 mol%, seguida por grossularita (16 - 45mol% e, em proporção menor, piropo (2 - 3 mol%. O piroxênio do protólito calcítico é típico da série diopsídio-hedenbergita, com composição média Diopsídio46Hedenbergita52Johannsenita2. Três tipos de minério magnetítico são encontrados: i magnetito bandado; ii magnetito disseminado; iii magnetito maciço filoneano. Ocorre ainda um minério sulfetado de cobre com e sem magnetita associado, e blocos de gossans. Os dados geológicos e metalogenéticos obtidos indicam que a gênese destes escarnitos está associada à influência dos granitos monzoníticos tardi

Espadas y puñales del bronce final: el depósito de armas de Puertollano (Ciudad Real

Directory of Open Access Journals (Sweden)

Montero Ruiz, Ignacio

2002-12-01

Full Text Available This paper deals with the technological study of a new Late Bronce Age hoard found in Puertollano (Ciudad Real. This hoard is a singular found in the context of Iberian Peninsula due to the number of items (14 swords and daggers and 1 fragment of ferrule and all of them are weapons. Elemental analysis by PIXE shows a Copper-Tin alloy with very low impurity pattern. A general comment about the real use of this weapons is included.

Se presenta el estudio tecnológico de un nuevo depósito del Bronce Final aparecido en Puertollano (Ciudad Real. Compuesto exclusivamente por armas (14 espadas y puñales y un fragmento de regatón constituye un deposito singular entre los conocidos en la Península ibérica. Se incluyen los análisis de composición mediante técnica PIXE que indican que todas las piezas son bronces binarios Cu-Sn con bajo nivel de impurezas. Se discute sobre la funcionalidad y uso práctico de estas producciones armamentísticas.

Estudio sedimentológico de un sector del río Guadalquivir en las proximidades de Andujar (provincia de Jaén los depósitos de la terraza + 6m (T4

Directory of Open Access Journals (Sweden)

Saint-Aubin, J.

1991-04-01

Full Text Available The characteristics of the current river channel of the Guadalquivir river and deposits of the terrace T4 ( + 6 m near Andújar are described. The study of morphological parameters evidence that they are balanced; this indicates that morphology and channel pattern are contolled mainly by local causes. Changes in discharge and bedload are responsible for gradual variations of channel patterno In contrast, overflow causes sharp changes. A general displacement of the river course towards the S. and SW. was deduced from careful study of maps, air photographs, etc., corresponding to various dates. T4 ( + 6 m terrace deposits exhibit 2 typical vertical sequences (called 1 and 2 respectively of channel and flood-plain facies. A model of terrace growth is proposed which is domonated by point bar deposits.En este trabajo, se analizan las características del cauce actual del río Guadalquivir, en un sector próximo a Andújar, así como los depósitos correspondientes a la terraza + 6 m (T4. Se estudian los principales parámetros morfológicos, observándose buen equilibrio entre ellos, lo que denota que su morfología y trazado están condicionados, fundamentalmente, por factores locales. Las variaciones paulatinas del cauce se producen por cambios en el caudal o en la carga, mientras que las variaciones bruscas, suelen ser consecuencia de desbordamientos. A partir de la comparación de datos de varias épocas (cartografía, foto-aérea, etc., se establece un desplazamiento general del río hacia el S. o SO. En los depósitos de la terraza + 6 m (T4, se distinguen dos secuencias diferentes (tipo 1 y 2, constituidas por asociación de facies de canal y de llanura de inundación. Se establece un modelo para la construcción de la terraza, en el que predominan los depósitos de acreción lateral, caracterizando barras de meandro.

Resultados paleomagnéticos de los depósitos pliopleistocenos de la cuenca de Palma (Mallorca, España

Directory of Open Access Journals (Sweden)

Silva, P. G.

2000-08-01

Full Text Available The results from the paleomagnetic analysis of the plio-pleistocene deposits located in the eastern (Bahia Azul Section and western (Banc d'Eivissa borders of the Palma Basin are presented in this paper. The Bahía Azul section is composite by a marine terrace at +70-74 m a.s.1., overlapped by nine littoral dune systems separated by erosional surfaces. The Banc d'Eivissa section is constituted of a lower marine terrace at +24-25 m a.s.l., buried by two dune systems, although there are more numerous in the vicinity. The lithological spectrum at both sections holds a main calcarenitic nature, but the available outcrops display a different degree of weathering making difficult the establishment of a continuous magnetoestratigraphic sequence. The paleontological content (Roselló y Cuerda, 1973 and paleomagnetic results of the Banc d'Eivissa deposits are no sufficient to establish a precise chronological sequence, and only is possible to locate them within the reverse polarity Matuyama epoch. On the contrary, the lower half of the Bahia Azul sequence (marine terrace plus the 3 first dune systems presents a consistent reverse polarity. The paleontological content of these materials indicates an early Pleistocene age (Emilian cycle: Cuerda y Sacarés, 1992 which agree with the obtained paleomagnetic results. Therefore, the whole sequence is interpreted to be located between the normal polarity chrons of Jaramillo and Olduvay (Clr. 1n and C2n of Cande and Kent, 1995 within the Matuyama epoch, but can not be totally rejected the possibility that them could be placed after the Olduvai Chron.Se presentan los resultados paleomagnéticos obtenidos del análisis de los depósitos plio-pleistocenos que afloran en los bordes oriental (sección de Bahía Azul y occidental (Banc d'Eivissa de la cuenca de Palma. La sección de Bahía Azul está constituida por una terraza marina situada a +70-74 metros sobre el nivel medio del mar y, sobre ella, nueve sistemas

Environmental Impact Assessment, Brownfield Areas. Brownfields are defined by the Florida DEP as abandoned, idled, or underused industrial and commercial facilities where expansion or redevelopment is complicated by real or perceived environmental contamination., Published in 2001, 1:24000 (1in=2000ft) scale, Florida Department of Environmental Protection (FDEP).

Data.gov (United States)

NSGIC State | GIS Inventory — Environmental Impact Assessment dataset current as of 2001. Brownfield Areas. Brownfields are defined by the Florida DEP as abandoned, idled, or underused industrial...

From concatenated codes to graph codes

DEFF Research Database (Denmark)

Justesen, Jørn; Høholdt, Tom

2004-01-01

We consider codes based on simple bipartite expander graphs. These codes may be seen as the first step leading from product type concatenated codes to more complex graph codes. We emphasize constructions of specific codes of realistic lengths, and study the details of decoding by message passing...

Toric Varieties and Codes, Error-correcting Codes, Quantum Codes, Secret Sharing and Decoding

DEFF Research Database (Denmark)

Hansen, Johan Peder

We present toric varieties and associated toric codes and their decoding. Toric codes are applied to construct Linear Secret Sharing Schemes (LSSS) with strong multiplication by the Massey construction. Asymmetric Quantum Codes are obtained from toric codes by the A.R. Calderbank P.W. Shor and A.......M. Steane construction of stabilizer codes (CSS) from linear codes containing their dual codes....

Contribuição à Gênese do Depósito Primário Polimetálico (Sn, W±, Zn, Cu, Pb) Correas, Ribeirão Branco (SP)

OpenAIRE

Cláudio Luiz Goraieb

2001-01-01

O depósito primário polimetálico (Sn, W, Zn, Cu, Pb) Correas, situa-se em terrenos pré-cambrianos da Faixa Ribeira, na porção sul do Estado de São Paulo. Dados geológicos obtidos em etapas de mapeamento e sondagem, juntamente com estudos petrográficos, geoquímicos, isotópicos e de inclusões fluidas, apontam para a relação espacial e genética de mineralização com rochas graníticas muito fracionadas (topázio-muscovita-albita granitos) do Maciço Correas. Essas rochas, ligeiramente peraluminossas...

Sistema constructivo industrializado in situ COTaCERO : transferencia tecnológica: construcción de depósitos-ejecución de viviendas en altura mediante paneles portantes de acero

OpenAIRE

Hermo Sánchez, Víctor Manuel

2013-01-01

[Resumen] Esta investigación comprende diseño y comprobación del sistema constructivo industrializado in situ COTaCERO. Transferencia tecnológica: construcción de depósitos mediante elevación de secciones desde el nivel del terreno con gatos hidráulicos - ejecución de viviendas en altura mediante paneles portantes de acero. Se analizan tres experiencias constructivas: - “La casa por el tejado”. La ejecución de edificaciones por elevación desde el nivel del terreno, “lift slab” y s...

Automatic coding method of the ACR Code

International Nuclear Information System (INIS)

Park, Kwi Ae; Ihm, Jong Sool; Ahn, Woo Hyun; Baik, Seung Kook; Choi, Han Yong; Kim, Bong Gi

1993-01-01

The authors developed a computer program for automatic coding of ACR(American College of Radiology) code. The automatic coding of the ACR code is essential for computerization of the data in the department of radiology. This program was written in foxbase language and has been used for automatic coding of diagnosis in the Department of Radiology, Wallace Memorial Baptist since May 1992. The ACR dictionary files consisted of 11 files, one for the organ code and the others for the pathology code. The organ code was obtained by typing organ name or code number itself among the upper and lower level codes of the selected one that were simultaneous displayed on the screen. According to the first number of the selected organ code, the corresponding pathology code file was chosen automatically. By the similar fashion of organ code selection, the proper pathologic dode was obtained. An example of obtained ACR code is '131.3661'. This procedure was reproducible regardless of the number of fields of data. Because this program was written in 'User's Defined Function' from, decoding of the stored ACR code was achieved by this same program and incorporation of this program into program in to another data processing was possible. This program had merits of simple operation, accurate and detail coding, and easy adjustment for another program. Therefore, this program can be used for automation of routine work in the department of radiology

Coding in pigeons: Multiple-coding versus single-code/default strategies.

Science.gov (United States)

Pinto, Carlos; Machado, Armando

2015-05-01

To investigate the coding strategies that pigeons may use in a temporal discrimination tasks, pigeons were trained on a matching-to-sample procedure with three sample durations (2s, 6s and 18s) and two comparisons (red and green hues). One comparison was correct following 2-s samples and the other was correct following both 6-s and 18-s samples. Tests were then run to contrast the predictions of two hypotheses concerning the pigeons' coding strategies, the multiple-coding and the single-code/default. According to the multiple-coding hypothesis, three response rules are acquired, one for each sample. According to the single-code/default hypothesis, only two response rules are acquired, one for the 2-s sample and a "default" rule for any other duration. In retention interval tests, pigeons preferred the "default" key, a result predicted by the single-code/default hypothesis. In no-sample tests, pigeons preferred the key associated with the 2-s sample, a result predicted by multiple-coding. Finally, in generalization tests, when the sample duration equaled 3.5s, the geometric mean of 2s and 6s, pigeons preferred the key associated with the 6-s and 18-s samples, a result predicted by the single-code/default hypothesis. The pattern of results suggests the need for models that take into account multiple sources of stimulus control. © Society for the Experimental Analysis of Behavior.

Quartzo magmático e hidrotermal do depósito de ouro São Jorge, Província Aurífera do Tapajós, Pará: petrografia, microscopia eletrônica de varredura-catodoluminescência e implicações metalogenéticas

Directory of Open Access Journals (Sweden)

Aldemir de Melo Sotero

Full Text Available Estudos em cristais de quartzo presentes nas associações minerais para a área do depósito de ouro São Jorge, Província Aurífera do Tapajós, sudoeste do estado do Pará, identificaram quatro tipos morfológico-texturais (Qz1, Qz2, Qz3 e Qz4 com base em imagens de microscopia eletrônica de varredura-catodoluminescência. Nas rochas mais preservadas do Granito São Jorge Jovem, ricas em anfibólio e biotita (associações 1 e 2, dominam cristais anédricos de quartzo magmático com luminescência alta a moderada (Qz1. Nas rochas parcialmente alteradas (associações 2 e 3, fluidos pós-magmáticos a hidrotermais afetaram o granito e percolaram fraturas do Qz1 e cristalizaram Qz2 não luminescente (escuro. Nas rochas mais intensamente alteradas (associação 4, sucessivos processos de alteração, dissolução e recristalização deram origem a cristais de quartzo zonados subédricos (Qz3 e euédricos (Qz4. Imagens por elétrons retroespalhados e análises semiquantitativas por espectroscopia por dispersão de energia identificaram duas gerações de ouro: Au1, enriquecido em Ag (4,3 a 23,7% e associado a cristais de pirita; Au2, enriquecido em Te (1,1 a 17,2% e incluso ou associado ao Qz4. O estudo de microscopia eletrônica de varredura-catodoluminescência forneceu informações importantes que foram preservadas na estrutura do quartzo. A evolução morfológico-textural desse mineral em diferentes estágios evidencia a ação gradativa do hidrotermalismo nas rochas e nas associações minerais do depósito São Jorge. A mineralização aurífera do depósito foi caracterizada quimicamente (espectroscopia por dispersão de energia e parageneticamente (pirita, esfalerita e Qz4, podendo ser dividida em gerações ou eventos mineralizantes distintos. A eficiência da metodologia utilizada neste estudo foi comprovada, permitindo sua aplicação em estudos de outros depósitos hidrotermais.

Determinación de los periodos predominantes de los depósitos de suelo de Tunja y Sogamoso usando microtemblores

Directory of Open Access Journals (Sweden)

Orlando Rincón Arango

2010-11-01

Full Text Available En el estudio fueron evaluados los periodos de losdepósitos de suelo mediante la relación H/V, técnicade Nakamura aplicada a registros de microtemblores;los registros fueron realizados en puntos del área urbanapara las ciudades de Tunja y Sogamoso (Boyacá,Colombia; se incluyó el análisis de estabilidad horariaen suelo y roca para los sitios de instalación deestaciones acelerográficas, se elaboró un mapa deisoperiodos y se establecieron zonas de respuestadinámica similar, comparando los resultados con laszonificaciones previas realizadas y los accidentestopográficos. Además, se analizó la variabilidad de losregistros ante la presencia de tubificación subsuperficial,fenómeno habitual en la ciudad de Tunja, debido a losavanzados procesos de erosión de los depósitos, queha desestabilizado diversas construcciones. Losresultados obtenidos se usaron para determinar los sitiosdonde sería necesario instrumentar, y se trazaron pautaspara el proceso de zonificación definitivo de las ciudades,en la siguiente etapa del proyecto de microzonificación

Evaluation Codes from an Affine Veriety Code Perspective

DEFF Research Database (Denmark)

Geil, Hans Olav

2008-01-01

Evaluation codes (also called order domain codes) are traditionally introduced as generalized one-point geometric Goppa codes. In the present paper we will give a new point of view on evaluation codes by introducing them instead as particular nice examples of affine variety codes. Our study...... includes a reformulation of the usual methods to estimate the minimum distances of evaluation codes into the setting of affine variety codes. Finally we describe the connection to the theory of one-pointgeometric Goppa codes. Contents 4.1 Introduction...... . . . . . . . . . . . . . . . . . . . . . . . 171 4.9 Codes form order domains . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 4.10 One-point geometric Goppa codes . . . . . . . . . . . . . . . . . . . . . . . . 176 4.11 Bibliographical Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 References...

An Optimal Linear Coding for Index Coding Problem

OpenAIRE

Pezeshkpour, Pouya

2015-01-01

An optimal linear coding solution for index coding problem is established. Instead of network coding approach by focus on graph theoric and algebraic methods a linear coding program for solving both unicast and groupcast index coding problem is presented. The coding is proved to be the optimal solution from the linear perspective and can be easily utilize for any number of messages. The importance of this work is lying mostly on the usage of the presented coding in the groupcast index coding ...

Rate-adaptive BCH codes for distributed source coding

DEFF Research Database (Denmark)

Salmistraro, Matteo; Larsen, Knud J.; Forchhammer, Søren

2013-01-01

This paper considers Bose-Chaudhuri-Hocquenghem (BCH) codes for distributed source coding. A feedback channel is employed to adapt the rate of the code during the decoding process. The focus is on codes with short block lengths for independently coding a binary source X and decoding it given its...... strategies for improving the reliability of the decoded result are analyzed, and methods for estimating the performance are proposed. In the analysis, noiseless feedback and noiseless communication are assumed. Simulation results show that rate-adaptive BCH codes achieve better performance than low...... correlated side information Y. The proposed codes have been analyzed in a high-correlation scenario, where the marginal probability of each symbol, Xi in X, given Y is highly skewed (unbalanced). Rate-adaptive BCH codes are presented and applied to distributed source coding. Adaptive and fixed checking...

Self-complementary circular codes in coding theory.

Science.gov (United States)

Fimmel, Elena; Michel, Christian J; Starman, Martin; Strüngmann, Lutz

2018-04-01

Self-complementary circular codes are involved in pairing genetic processes. A maximal [Formula: see text] self-complementary circular code X of trinucleotides was identified in genes of bacteria, archaea, eukaryotes, plasmids and viruses (Michel in Life 7(20):1-16 2017, J Theor Biol 380:156-177, 2015; Arquès and Michel in J Theor Biol 182:45-58 1996). In this paper, self-complementary circular codes are investigated using the graph theory approach recently formulated in Fimmel et al. (Philos Trans R Soc A 374:20150058, 2016). A directed graph [Formula: see text] associated with any code X mirrors the properties of the code. In the present paper, we demonstrate a necessary condition for the self-complementarity of an arbitrary code X in terms of the graph theory. The same condition has been proven to be sufficient for codes which are circular and of large size [Formula: see text] trinucleotides, in particular for maximal circular codes ([Formula: see text] trinucleotides). For codes of small-size [Formula: see text] trinucleotides, some very rare counterexamples have been constructed. Furthermore, the length and the structure of the longest paths in the graphs associated with the self-complementary circular codes are investigated. It has been proven that the longest paths in such graphs determine the reading frame for the self-complementary circular codes. By applying this result, the reading frame in any arbitrary sequence of trinucleotides is retrieved after at most 15 nucleotides, i.e., 5 consecutive trinucleotides, from the circular code X identified in genes. Thus, an X motif of a length of at least 15 nucleotides in an arbitrary sequence of trinucleotides (not necessarily all of them belonging to X) uniquely defines the reading (correct) frame, an important criterion for analyzing the X motifs in genes in the future.

Diagonal Eigenvalue Unity (DEU) code for spectral amplitude coding-optical code division multiple access

Science.gov (United States)

Ahmed, Hassan Yousif; Nisar, K. S.

2013-08-01

Code with ideal in-phase cross correlation (CC) and practical code length to support high number of users are required in spectral amplitude coding-optical code division multiple access (SAC-OCDMA) systems. SAC systems are getting more attractive in the field of OCDMA because of its ability to eliminate the influence of multiple access interference (MAI) and also suppress the effect of phase induced intensity noise (PIIN). In this paper, we have proposed new Diagonal Eigenvalue Unity (DEU) code families with ideal in-phase CC based on Jordan block matrix with simple algebraic ways. Four sets of DEU code families based on the code weight W and number of users N for the combination (even, even), (even, odd), (odd, odd) and (odd, even) are constructed. This combination gives DEU code more flexibility in selection of code weight and number of users. These features made this code a compelling candidate for future optical communication systems. Numerical results show that the proposed DEU system outperforms reported codes. In addition, simulation results taken from a commercial optical systems simulator, Virtual Photonic Instrument (VPI™) shown that, using point to multipoint transmission in passive optical network (PON), DEU has better performance and could support long span with high data rate.

Depósito de corriente piroclástica reciente (1963-64 AD? - 1976 AD?) del volcán Copahue (I): evidencias geológicas de campo y edad radiocarbónica

OpenAIRE

Petrinovic, Ivan A; D´Elia, Leandro; Páez, Gerardo; Balbis, Catalina; Guzmán, Silvina; Villarosa, Gustavo; Carniel, Roberto

2014-01-01

Se describe un depósito atribuido a una corriente piroclástica sobre los flancos NE, E y SE del volcán Copahue. La datación radiocarbónica (F = 1.3678 ±0.0075) permite asignarle dos edades eruptivas posibles 1963-64 AD y 1976 AD (1961 AD?). Estimamos su importancia en la asignación de peligro volcánico del Copahue. We describe a historical pyroclastic deposit attributed to a pyroclastic density current (PDC) in the NE, E and SE flanks from the Copahue volcano. The radiocarbon dating (F = 1...

Depósito de corriente piroclástica reciente (1963-64 AD? ? 1976 AD?) del volcán Copahue (I): evidencias geológicas de campo y edad radiocarbónica

OpenAIRE

Petrinovic, Ivan Alejandro; D'elia, Leandro; Paez, Gerardo Nestor; Balbis, Catalina; Guzman, Silvina Raquel; Villarosa, Gustavo; Carniel, Roberto

2016-01-01

Se describe un depósito atribuido a una corriente piroclástica sobre los flancos NE, E y SE del volcán Copahue. La datación radiocarbónica (F = 1.3678 ±0.0075) permite asignarle dos edades eruptivas posibles 1963-64 AD y 1976 AD (1961 AD?). Estimamos su importancia en la asignación de peligro volcánico del Copahue. We describe a historical pyroclastic deposit attributed to a pyroclastic density current (PDC) in the NE, E and SE flanks from the Copahue volcano. The radiocarbon dating (F = 1...

List Decoding of Matrix-Product Codes from nested codes: an application to Quasi-Cyclic codes

DEFF Research Database (Denmark)

Hernando, Fernando; Høholdt, Tom; Ruano, Diego

2012-01-01

A list decoding algorithm for matrix-product codes is provided when $C_1,..., C_s$ are nested linear codes and $A$ is a non-singular by columns matrix. We estimate the probability of getting more than one codeword as output when the constituent codes are Reed-Solomon codes. We extend this list...... decoding algorithm for matrix-product codes with polynomial units, which are quasi-cyclic codes. Furthermore, it allows us to consider unique decoding for matrix-product codes with polynomial units....

Coding Partitions

Directory of Open Access Journals (Sweden)

Fabio Burderi

2007-05-01

Full Text Available Motivated by the study of decipherability conditions for codes weaker than Unique Decipherability (UD, we introduce the notion of coding partition. Such a notion generalizes that of UD code and, for codes that are not UD, allows to recover the ``unique decipherability" at the level of the classes of the partition. By tacking into account the natural order between the partitions, we define the characteristic partition of a code X as the finest coding partition of X. This leads to introduce the canonical decomposition of a code in at most one unambiguouscomponent and other (if any totally ambiguouscomponents. In the case the code is finite, we give an algorithm for computing its canonical partition. This, in particular, allows to decide whether a given partition of a finite code X is a coding partition. This last problem is then approached in the case the code is a rational set. We prove its decidability under the hypothesis that the partition contains a finite number of classes and each class is a rational set. Moreover we conjecture that the canonical partition satisfies such a hypothesis. Finally we consider also some relationships between coding partitions and varieties of codes.

Dep

African Journals Online (AJOL)

USER

2014-10-20

Oct 20, 2014 ... This research work studied the importance of water as a resource that needs to be sustained. From the study, it was ... management of the country's water resources ..... importance that a total/integral approach to water ...

Combinatorial neural codes from a mathematical coding theory perspective.

Science.gov (United States)

Curto, Carina; Itskov, Vladimir; Morrison, Katherine; Roth, Zachary; Walker, Judy L

2013-07-01

Shannon's seminal 1948 work gave rise to two distinct areas of research: information theory and mathematical coding theory. While information theory has had a strong influence on theoretical neuroscience, ideas from mathematical coding theory have received considerably less attention. Here we take a new look at combinatorial neural codes from a mathematical coding theory perspective, examining the error correction capabilities of familiar receptive field codes (RF codes). We find, perhaps surprisingly, that the high levels of redundancy present in these codes do not support accurate error correction, although the error-correcting performance of receptive field codes catches up to that of random comparison codes when a small tolerance to error is introduced. However, receptive field codes are good at reflecting distances between represented stimuli, while the random comparison codes are not. We suggest that a compromise in error-correcting capability may be a necessary price to pay for a neural code whose structure serves not only error correction, but must also reflect relationships between stimuli.

LDGM Codes for Channel Coding and Joint Source-Channel Coding of Correlated Sources

Directory of Open Access Journals (Sweden)

Javier Garcia-Frias

2005-05-01

Full Text Available We propose a coding scheme based on the use of systematic linear codes with low-density generator matrix (LDGM codes for channel coding and joint source-channel coding of multiterminal correlated binary sources. In both cases, the structures of the LDGM encoder and decoder are shown, and a concatenated scheme aimed at reducing the error floor is proposed. Several decoding possibilities are investigated, compared, and evaluated. For different types of noisy channels and correlation models, the resulting performance is very close to the theoretical limits.

Software Certification - Coding, Code, and Coders

Science.gov (United States)

Havelund, Klaus; Holzmann, Gerard J.

2011-01-01

We describe a certification approach for software development that has been adopted at our organization. JPL develops robotic spacecraft for the exploration of the solar system. The flight software that controls these spacecraft is considered to be mission critical. We argue that the goal of a software certification process cannot be the development of "perfect" software, i.e., software that can be formally proven to be correct under all imaginable and unimaginable circumstances. More realistically, the goal is to guarantee a software development process that is conducted by knowledgeable engineers, who follow generally accepted procedures to control known risks, while meeting agreed upon standards of workmanship. We target three specific issues that must be addressed in such a certification procedure: the coding process, the code that is developed, and the skills of the coders. The coding process is driven by standards (e.g., a coding standard) and tools. The code is mechanically checked against the standard with the help of state-of-the-art static source code analyzers. The coders, finally, are certified in on-site training courses that include formal exams.

Caracterização de depósitos realizados pelo processo de deposição por fricção em chapas de aço de alto carbono

OpenAIRE

Márcio Levi Kramer de Macedo

2011-01-01

Este trabalho tem por objetivo estudar um processo alternativo de deposição e reparos em defeitos superficiais de componentes ou estruturas fabricados em aço de alto carbono, utilizando o processo de soldagem de Deposição Superficial por Fricção (Friction Surfacing). Foi avaliada a influência dos parâmetros do processo de deposição como: força axial, velocidade de rotação do pino consumível e velocidade de avanço de deposição nas propriedades mecânicas e metalúrgicas dos depósitos com diferen...

Discussion on LDPC Codes and Uplink Coding

Science.gov (United States)

Andrews, Ken; Divsalar, Dariush; Dolinar, Sam; Moision, Bruce; Hamkins, Jon; Pollara, Fabrizio

2007-01-01

This slide presentation reviews the progress that the workgroup on Low-Density Parity-Check (LDPC) for space link coding. The workgroup is tasked with developing and recommending new error correcting codes for near-Earth, Lunar, and deep space applications. Included in the presentation is a summary of the technical progress of the workgroup. Charts that show the LDPC decoder sensitivity to symbol scaling errors are reviewed, as well as a chart showing the performance of several frame synchronizer algorithms compared to that of some good codes and LDPC decoder tests at ESTL. Also reviewed is a study on Coding, Modulation, and Link Protocol (CMLP), and the recommended codes. A design for the Pseudo-Randomizer with LDPC Decoder and CRC is also reviewed. A chart that summarizes the three proposed coding systems is also presented.

New quantum codes constructed from quaternary BCH codes

Science.gov (United States)

Xu, Gen; Li, Ruihu; Guo, Luobin; Ma, Yuena

2016-10-01

In this paper, we firstly study construction of new quantum error-correcting codes (QECCs) from three classes of quaternary imprimitive BCH codes. As a result, the improved maximal designed distance of these narrow-sense imprimitive Hermitian dual-containing quaternary BCH codes are determined to be much larger than the result given according to Aly et al. (IEEE Trans Inf Theory 53:1183-1188, 2007) for each different code length. Thus, families of new QECCs are newly obtained, and the constructed QECCs have larger distance than those in the previous literature. Secondly, we apply a combinatorial construction to the imprimitive BCH codes with their corresponding primitive counterpart and construct many new linear quantum codes with good parameters, some of which have parameters exceeding the finite Gilbert-Varshamov bound for linear quantum codes.

Entanglement-assisted quantum MDS codes from negacyclic codes

Science.gov (United States)

Lu, Liangdong; Li, Ruihu; Guo, Luobin; Ma, Yuena; Liu, Yang

2018-03-01

The entanglement-assisted formalism generalizes the standard stabilizer formalism, which can transform arbitrary classical linear codes into entanglement-assisted quantum error-correcting codes (EAQECCs) by using pre-shared entanglement between the sender and the receiver. In this work, we construct six classes of q-ary entanglement-assisted quantum MDS (EAQMDS) codes based on classical negacyclic MDS codes by exploiting two or more pre-shared maximally entangled states. We show that two of these six classes q-ary EAQMDS have minimum distance more larger than q+1. Most of these q-ary EAQMDS codes are new in the sense that their parameters are not covered by the codes available in the literature.

Visualizing code and coverage changes for code review

NARCIS (Netherlands)

Oosterwaal, Sebastiaan; van Deursen, A.; De Souza Coelho, R.; Sawant, A.A.; Bacchelli, A.

2016-01-01

One of the tasks of reviewers is to verify that code modifications are well tested. However, current tools offer little support in understanding precisely how changes to the code relate to changes to the tests. In particular, it is hard to see whether (modified) test code covers the changed code.

Homological stabilizer codes

Energy Technology Data Exchange (ETDEWEB)

Anderson, Jonas T., E-mail: jonastyleranderson@gmail.com

2013-03-15

In this paper we define homological stabilizer codes on qubits which encompass codes such as Kitaev's toric code and the topological color codes. These codes are defined solely by the graphs they reside on. This feature allows us to use properties of topological graph theory to determine the graphs which are suitable as homological stabilizer codes. We then show that all toric codes are equivalent to homological stabilizer codes on 4-valent graphs. We show that the topological color codes and toric codes correspond to two distinct classes of graphs. We define the notion of label set equivalencies and show that under a small set of constraints the only homological stabilizer codes without local logical operators are equivalent to Kitaev's toric code or to the topological color codes. - Highlights: Black-Right-Pointing-Pointer We show that Kitaev's toric codes are equivalent to homological stabilizer codes on 4-valent graphs. Black-Right-Pointing-Pointer We show that toric codes and color codes correspond to homological stabilizer codes on distinct graphs. Black-Right-Pointing-Pointer We find and classify all 2D homological stabilizer codes. Black-Right-Pointing-Pointer We find optimal codes among the homological stabilizer codes.

SPECTRAL AMPLITUDE CODING OCDMA SYSTEMS USING ENHANCED DOUBLE WEIGHT CODE

Directory of Open Access Journals (Sweden)

F.N. HASOON

2006-12-01

Full Text Available A new code structure for spectral amplitude coding optical code division multiple access systems based on double weight (DW code families is proposed. The DW has a fixed weight of two. Enhanced double-weight (EDW code is another variation of a DW code family that can has a variable weight greater than one. The EDW code possesses ideal cross-correlation properties and exists for every natural number n. A much better performance can be provided by using the EDW code compared to the existing code such as Hadamard and Modified Frequency-Hopping (MFH codes. It has been observed that theoretical analysis and simulation for EDW is much better performance compared to Hadamard and Modified Frequency-Hopping (MFH codes.

Isolation of recombinant antibodies directed against surface proteins of Clostridium difficile.

Science.gov (United States)

Shirvan, Ali Nazari; Aitken, Robert

2016-01-01

Clostridium difficile has emerged as an increasingly important nosocomial pathogen and the prime causative agent of antibiotic-associated diarrhoea and pseudomembranous colitis in humans. In addition to toxins A and B, immunological studies using antisera from patients infected with C. difficile have shown that a number of other bacterial factors contribute to the pathogenesis, including surface proteins, which are responsible for adhesion, motility and other interactions with the human host. In this study, various clostridial targets, including FliC, FliD and cell wall protein 66, were expressed and purified. Phage antibody display yielded a large panel of specific recombinant antibodies, which were expressed, purified and characterised. Reactions of the recombinant antibodies with their targets were detected by enzyme-linked immunosorbent assay; and Western blotting suggested that linear rather than conformational epitopes were recognised. Binding of the recombinant antibodies to surface-layer proteins and their components showed strain specificity, with good recognition of proteins from C. difficile 630. However, no reaction was observed for strain R20291-a representative of the 027 ribotype. Binding of the recombinant antibodies to C. difficile M120 extracts indicated that a component of a surface-layer protein of this strain might possess immunoglobulin-binding activities. The recombinant antibodies against FliC and FliD proteins were able to inhibit bacterial motility. Copyright © 2016. Published by Elsevier Editora Ltda.

Investigation of the single layer model of GPS ionospheric data processing using IRI-90 and the attached diffusive equilibrium model of plasmaspheric electron density

Directory of Open Access Journals (Sweden)

L. Bànyai

1997-06-01

Full Text Available The single layer model of GPS ionospheric data processing is compared with the International Reference Ionosphere í 1990 and the attached Diffusive Equilibrium model of Plasmasphere (IRI-90+DEP which proved to be a good supplement to GPS data processing. These models can be used to estimate the single layer height and to improve the mapping function in day-time. The code delays estimated from IRI-90+DEP models are compared with GPS measurements carried out by TurboRogue receiver. These models can be used to estimate the preliminary receiver biases especially in the case of cross-correlation tracking mode. The practical drawback of the IRI-90 model is the sharp discontinuity of the ion components during sunset and sunrise at an elevation of 1000 km, because it also causes a sharp discontinuity in the TEC values computed from the DEP model. The GPS data may be a good source to improve the topside region of the IRI model estimating smooth TEC transition before and after sunrise in the plasmasphere.

DLLExternalCode

Energy Technology Data Exchange (ETDEWEB)

2014-05-14

DLLExternalCode is the a general dynamic-link library (DLL) interface for linking GoldSim (www.goldsim.com) with external codes. The overall concept is to use GoldSim as top level modeling software with interfaces to external codes for specific calculations. The DLLExternalCode DLL that performs the linking function is designed to take a list of code inputs from GoldSim, create an input file for the external application, run the external code, and return a list of outputs, read from files created by the external application, back to GoldSim. Instructions for creating the input file, running the external code, and reading the output are contained in an instructions file that is read and interpreted by the DLL.

High efficiency video coding coding tools and specification

CERN Document Server

Wien, Mathias

2015-01-01

The video coding standard High Efficiency Video Coding (HEVC) targets at improved compression performance for video resolutions of HD and beyond, providing Ultra HD video at similar compressed bit rates as for HD video encoded with the well-established video coding standard H.264 | AVC. Based on known concepts, new coding structures and improved coding tools have been developed and specified in HEVC. The standard is expected to be taken up easily by established industry as well as new endeavors, answering the needs of todays connected and ever-evolving online world. This book presents the High Efficiency Video Coding standard and explains it in a clear and coherent language. It provides a comprehensive and consistently written description, all of a piece. The book targets at both, newbies to video coding as well as experts in the field. While providing sections with introductory text for the beginner, it suits as a well-arranged reference book for the expert. The book provides a comprehensive reference for th...

Converter of a continuous code into the Grey code

International Nuclear Information System (INIS)

Gonchar, A.I.; TrUbnikov, V.R.

1979-01-01

Described is a converter of a continuous code into the Grey code used in a 12-charged precision amplitude-to-digital converter to decrease the digital component of spectrometer differential nonlinearity to +0.7% in the 98% range of the measured band. To construct the converter of a continuous code corresponding to the input signal amplitude into the Grey code used is the regularity in recycling of units and zeroes in each discharge of the Grey code in the case of a continuous change of the number of pulses of a continuous code. The converter is constructed on the elements of 155 series, the frequency of continuous code pulse passing at the converter input is 25 MHz

Depósito de TiN sobre herramientas de corte para uso industrial

Directory of Open Access Journals (Sweden)

Auger, M. A.

2004-04-01

Full Text Available TiN coatings on stainless steel blades for glass fibre cutting have been investigated in this work. The aim was to improve their mechanical properties and increase the tool time life, decreasing in this way the production stops. Reactive magnetron sputtering has been the deposition technique. TiN films chemical composition has been determined by AES (Auger Electron Spectroscopy, RBS (Rutherford Backscattering Spectroscopy and XANES (X-Ray Spectroscopy Near the Absorption Edge, and it has been correlated to the gas mixture composition in the vacuum chamber. Crystalline structure has been determined by X-Ray Diffraction, and the films morphology has been observed by SEM (Scanning Electron Microscopy. The hardness coating has been extracted from nanoindentation measurements, giving a 21.54±1.04 GPa hardness value, typical for TiN in the literature. Factory proofs for coated cutting blades show a 67% lifetime increase.

En este trabajo se han estudiado láminas de TiN crecidas sobre cuchillas de acero inoxidable empleadas en el corte de fibra de vidrio, para mejorar sus propiedades mecánicas y aumentar el tiempo de vida de la herramienta, reduciendo de este modo las paradas de producción. La técnica de depósito utilizada ha sido la de sputtering magnetrón reactivo. La composición química de las capas de TiN ha sido determinada mediante medidas de Espectroscopía Auger, RBS (Rutherford Backscattering Spectroscopy y XANES (X-Ray Spectroscopy Near the Absorption Edge y se ha relacionado con la composición de la mezcla gaseosa presente en la cámara de reacción. La estructura cristalina se ha determinado mediante Difracción de Rayos X, y mediante la técnica de SEM (Scanning Electron Microscopy se ha observado la morfología de las capas. La dureza del recubrimiento se ha calculado a partir de medidas de nanoindentación, obteniéndose un valor de 21.54±1.04 GPa, típico en la literatura para el TiN. Los resultados de la prueba en f

The Aster code; Code Aster

Energy Technology Data Exchange (ETDEWEB)

Delbecq, J.M

1999-07-01

The Aster code is a 2D or 3D finite-element calculation code for structures developed by the R and D direction of Electricite de France (EdF). This dossier presents a complete overview of the characteristics and uses of the Aster code: introduction of version 4; the context of Aster (organisation of the code development, versions, systems and interfaces, development tools, quality assurance, independent validation); static mechanics (linear thermo-elasticity, Euler buckling, cables, Zarka-Casier method); non-linear mechanics (materials behaviour, big deformations, specific loads, unloading and loss of load proportionality indicators, global algorithm, contact and friction); rupture mechanics (G energy restitution level, restitution level in thermo-elasto-plasticity, 3D local energy restitution level, KI and KII stress intensity factors, calculation of limit loads for structures), specific treatments (fatigue, rupture, wear, error estimation); meshes and models (mesh generation, modeling, loads and boundary conditions, links between different modeling processes, resolution of linear systems, display of results etc..); vibration mechanics (modal and harmonic analysis, dynamics with shocks, direct transient dynamics, seismic analysis and aleatory dynamics, non-linear dynamics, dynamical sub-structuring); fluid-structure interactions (internal acoustics, mass, rigidity and damping); linear and non-linear thermal analysis; steels and metal industry (structure transformations); coupled problems (internal chaining, internal thermo-hydro-mechanical coupling, chaining with other codes); products and services. (J.S.)

Entanglement-assisted quantum MDS codes constructed from negacyclic codes

Science.gov (United States)

Chen, Jianzhang; Huang, Yuanyuan; Feng, Chunhui; Chen, Riqing

2017-12-01

Recently, entanglement-assisted quantum codes have been constructed from cyclic codes by some scholars. However, how to determine the number of shared pairs required to construct entanglement-assisted quantum codes is not an easy work. In this paper, we propose a decomposition of the defining set of negacyclic codes. Based on this method, four families of entanglement-assisted quantum codes constructed in this paper satisfy the entanglement-assisted quantum Singleton bound, where the minimum distance satisfies q+1 ≤ d≤ n+2/2. Furthermore, we construct two families of entanglement-assisted quantum codes with maximal entanglement.

Error-correction coding

Science.gov (United States)

Hinds, Erold W. (Principal Investigator)

1996-01-01

This report describes the progress made towards the completion of a specific task on error-correcting coding. The proposed research consisted of investigating the use of modulation block codes as the inner code of a concatenated coding system in order to improve the overall space link communications performance. The study proposed to identify and analyze candidate codes that will complement the performance of the overall coding system which uses the interleaved RS (255,223) code as the outer code.

Tecnología de herramientas rotativas durante el Bronce Final Atlántico. El depósito de Villena

Directory of Open Access Journals (Sweden)

Armbruster, Barbara R.

1994-12-01

Full Text Available The analysis of the Villena goldhoard bracelets is the starting point for a team research which has showed the existence of a technological stage which was more developed than we thought for the Atlantic Bronze Age in the Iberian Peninsula. The use of a complex lost wax casting gold technique and the existence of a horizontal rotary axis lathe are demonstrated. Finally we put forward an explanation for this important hoard and we stablish a chronological frame work framework for a series of gold finds coming from the southwest of the Iberian Peninsula.

El estudio de los brazaletes del tesoro de Villena es el punto de partida de una investigación en equipo que ha tenido como resultado la constatación de un estadio tecnológico más avanzado del que hasta ahora se pensaba para la metalurgia del Bronce Atlántico en la Península Ibérica. Se demuestra la práctica de una sofisticada técnica de fundición a la cera perdida en oro y la existencia del torno de eje horizontal. Finalmente planteamos un modelo interpretativo para este importante depósito y situamos en un marco de cronología relativa toda una serie de hallazgos de orfebrería del suroeste peninsular que hasta la fecha se encontraban descontextualizados.

Turbo-Gallager Codes: The Emergence of an Intelligent Coding ...

African Journals Online (AJOL)

Today, both turbo codes and low-density parity-check codes are largely superior to other code families and are being used in an increasing number of modern communication systems including 3G standards, satellite and deep space communications. However, the two codes have certain distinctive characteristics that ...

TASS code topical report. V.1 TASS code technical manual

International Nuclear Information System (INIS)

Sim, Suk K.; Chang, W. P.; Kim, K. D.; Kim, H. C.; Yoon, H. Y.

1997-02-01

TASS 1.0 code has been developed at KAERI for the initial and reload non-LOCA safety analysis for the operating PWRs as well as the PWRs under construction in Korea. TASS code will replace various vendor's non-LOCA safety analysis codes currently used for the Westinghouse and ABB-CE type PWRs in Korea. This can be achieved through TASS code input modifications specific to each reactor type. The TASS code can be run interactively through the keyboard operation. A simimodular configuration used in developing the TASS code enables the user easily implement new models. TASS code has been programmed using FORTRAN77 which makes it easy to install and port for different computer environments. The TASS code can be utilized for the steady state simulation as well as the non-LOCA transient simulations such as power excursions, reactor coolant pump trips, load rejections, loss of feedwater, steam line breaks, steam generator tube ruptures, rod withdrawal and drop, and anticipated transients without scram (ATWS). The malfunctions of the control systems, components, operator actions and the transients caused by the malfunctions can be easily simulated using the TASS code. This technical report describes the TASS 1.0 code models including reactor thermal hydraulic, reactor core and control models. This TASS code models including reactor thermal hydraulic, reactor core and control models. This TASS code technical manual has been prepared as a part of the TASS code manual which includes TASS code user's manual and TASS code validation report, and will be submitted to the regulatory body as a TASS code topical report for a licensing non-LOCA safety analysis for the Westinghouse and ABB-CE type PWRs operating and under construction in Korea. (author). 42 refs., 29 tabs., 32 figs

Decoding of concatenated codes with interleaved outer codes

DEFF Research Database (Denmark)

Justesen, Jørn; Høholdt, Tom; Thommesen, Christian

2004-01-01

Recently Bleichenbacher et al. proposed a decoding algorithm for interleaved (N, K) Reed-Solomon codes, which allows close to N-K errors to be corrected in many cases. We discuss the application of this decoding algorithm to concatenated codes.......Recently Bleichenbacher et al. proposed a decoding algorithm for interleaved (N, K) Reed-Solomon codes, which allows close to N-K errors to be corrected in many cases. We discuss the application of this decoding algorithm to concatenated codes....

Fast Coding Unit Encoding Mechanism for Low Complexity Video Coding

OpenAIRE

Gao, Yuan; Liu, Pengyu; Wu, Yueying; Jia, Kebin; Gao, Guandong

2016-01-01

In high efficiency video coding (HEVC), coding tree contributes to excellent compression performance. However, coding tree brings extremely high computational complexity. Innovative works for improving coding tree to further reduce encoding time are stated in this paper. A novel low complexity coding tree mechanism is proposed for HEVC fast coding unit (CU) encoding. Firstly, this paper makes an in-depth study of the relationship among CU distribution, quantization parameter (QP) and content ...

Codes Over Hyperfields

Directory of Open Access Journals (Sweden)

Atamewoue Surdive

2017-12-01

Full Text Available In this paper, we define linear codes and cyclic codes over a finite Krasner hyperfield and we characterize these codes by their generator matrices and parity check matrices. We also demonstrate that codes over finite Krasner hyperfields are more interesting for code theory than codes over classical finite fields.

Amino acid codes in mitochondria as possible clues to primitive codes

Science.gov (United States)

Jukes, T. H.

1981-01-01

Differences between mitochondrial codes and the universal code indicate that an evolutionary simplification has taken place, rather than a return to a more primitive code. However, these differences make it evident that the universal code is not the only code possible, and therefore earlier codes may have differed markedly from the previous code. The present universal code is probably a 'frozen accident.' The change in CUN codons from leucine to threonine (Neurospora vs. yeast mitochondria) indicates that neutral or near-neutral changes occurred in the corresponding proteins when this code change took place, caused presumably by a mutation in a tRNA gene.

Analysis of quantum error-correcting codes: Symplectic lattice codes and toric codes

Science.gov (United States)

Harrington, James William

Quantum information theory is concerned with identifying how quantum mechanical resources (such as entangled quantum states) can be utilized for a number of information processing tasks, including data storage, computation, communication, and cryptography. Efficient quantum algorithms and protocols have been developed for performing some tasks (e.g. , factoring large numbers, securely communicating over a public channel, and simulating quantum mechanical systems) that appear to be very difficult with just classical resources. In addition to identifying the separation between classical and quantum computational power, much of the theoretical focus in this field over the last decade has been concerned with finding novel ways of encoding quantum information that are robust against errors, which is an important step toward building practical quantum information processing devices. In this thesis I present some results on the quantum error-correcting properties of oscillator codes (also described as symplectic lattice codes) and toric codes. Any harmonic oscillator system (such as a mode of light) can be encoded with quantum information via symplectic lattice codes that are robust against shifts in the system's continuous quantum variables. I show the existence of lattice codes whose achievable rates match the one-shot coherent information over the Gaussian quantum channel. Also, I construct a family of symplectic self-dual lattices and search for optimal encodings of quantum information distributed between several oscillators. Toric codes provide encodings of quantum information into two-dimensional spin lattices that are robust against local clusters of errors and which require only local quantum operations for error correction. Numerical simulations of this system under various error models provide a calculation of the accuracy threshold for quantum memory using toric codes, which can be related to phase transitions in certain condensed matter models. I also present

Depósito e perdas de calda em sistema de pulverização com turboatomizador em videira Deposition and spray losses in an air-assisted sprayer system in grapevine

Directory of Open Access Journals (Sweden)

Marcelo G. Balan

2006-08-01

Full Text Available Grande parte dos viticultores da região Norte do Paraná pratica a condução da videira em caramanchão, com mais de 50 aplicações fitossanitárias em um único ciclo. O objetivo deste trabalho foi avaliar essas aplicações com turboatomizador assistido de ar no sistema de pulverização, por meio do depósito de calda nas folhas e perdas. O trabalho foi desenvolvido utilizando-se de cinco condições de aplicação, variando-se tamanho de gotas e volume de aplicação, com quatro repetições, em blocos casualizados. A avaliação do sistema foi feita com a aplicação de uma calda de cloreto de potássio (5%, sendo o depósito nas folhas medido pela condutividade elétrica, e as perdas, pela comparação entre volumes aplicado e recuperado nas folhas. Para todas as condições, as perdas foram superiores a 48%. Os maiores volumes aplicados apresentaram as maiores deposições, e gotas maiores apresentaram maior depósito e mesma perda em relação a gotas menores. Os menores volumes não diferiram com relação à deposição, destacando-se as condições gotas maiores a volume baixo e a testemunha utilizada pelo viticultor, que apresentaram as menores perdas. Os resultados demonstram que o turboatomizador é uma importante ferramenta para maximizar as operações de pulverização em uva, e as alterações na configuração das pontas de pulverização devem ser mais estudadas.Winegrowers in the north of Paraná State carry on grapevines in arbour and pesticide applications could overcome more than fifty times in a cycle. The aim of this study was to evaluate the features of the air assisted sprayer application system by spray volume deposition and losses. Five treatments and four randomized blocks were used. The treatments varied the droplet size and application volume. The evaluation of the system was done with a 5% spray solution containing KCl being the leaves spray deposit measured through electric conductivity and the losses by the

Coding for dummies

CERN Document Server

Abraham, Nikhil

2015-01-01

Hands-on exercises help you learn to code like a pro No coding experience is required for Coding For Dummies,your one-stop guide to building a foundation of knowledge inwriting computer code for web, application, and softwaredevelopment. It doesn't matter if you've dabbled in coding or neverwritten a line of code, this book guides you through the basics.Using foundational web development languages like HTML, CSS, andJavaScript, it explains in plain English how coding works and whyit's needed. Online exercises developed by Codecademy, a leading online codetraining site, help hone coding skill

Detecting non-coding selective pressure in coding regions

Directory of Open Access Journals (Sweden)

Blanchette Mathieu

2007-02-01

Full Text Available Abstract Background Comparative genomics approaches, where orthologous DNA regions are compared and inter-species conserved regions are identified, have proven extremely powerful for identifying non-coding regulatory regions located in intergenic or intronic regions. However, non-coding functional elements can also be located within coding region, as is common for exonic splicing enhancers, some transcription factor binding sites, and RNA secondary structure elements affecting mRNA stability, localization, or translation. Since these functional elements are located in regions that are themselves highly conserved because they are coding for a protein, they generally escaped detection by comparative genomics approaches. Results We introduce a comparative genomics approach for detecting non-coding functional elements located within coding regions. Codon evolution is modeled as a mixture of codon substitution models, where each component of the mixture describes the evolution of codons under a specific type of coding selective pressure. We show how to compute the posterior distribution of the entropy and parsimony scores under this null model of codon evolution. The method is applied to a set of growth hormone 1 orthologous mRNA sequences and a known exonic splicing elements is detected. The analysis of a set of CORTBP2 orthologous genes reveals a region of several hundred base pairs under strong non-coding selective pressure whose function remains unknown. Conclusion Non-coding functional elements, in particular those involved in post-transcriptional regulation, are likely to be much more prevalent than is currently known. With the numerous genome sequencing projects underway, comparative genomics approaches like that proposed here are likely to become increasingly powerful at detecting such elements.

Dynamic Shannon Coding

OpenAIRE

Gagie, Travis

2005-01-01

We present a new algorithm for dynamic prefix-free coding, based on Shannon coding. We give a simple analysis and prove a better upper bound on the length of the encoding produced than the corresponding bound for dynamic Huffman coding. We show how our algorithm can be modified for efficient length-restricted coding, alphabetic coding and coding with unequal letter costs.

The correspondence between projective codes and 2-weight codes

NARCIS (Netherlands)

Brouwer, A.E.; Eupen, van M.J.M.; Tilborg, van H.C.A.; Willems, F.M.J.

1994-01-01

The hyperplanes intersecting a 2-weight code in the same number of points obviously form the point set of a projective code. On the other hand, if we have a projective code C, then we can make a 2-weight code by taking the multiset of points E PC with multiplicity "Y(w), where W is the weight of

Quality Improvement of MARS Code and Establishment of Code Coupling

International Nuclear Information System (INIS)

Chung, Bub Dong; Jeong, Jae Jun; Kim, Kyung Doo

2010-04-01

The improvement of MARS code quality and coupling with regulatory auditing code have been accomplished for the establishment of self-reliable technology based regulatory auditing system. The unified auditing system code was realized also by implementing the CANDU specific models and correlations. As a part of the quality assurance activities, the various QA reports were published through the code assessments. The code manuals were updated and published a new manual which describe the new models and correlations. The code coupling methods were verified though the exercise of plant application. The education-training seminar and technology transfer were performed for the code users. The developed MARS-KS is utilized as reliable auditing tool for the resolving the safety issue and other regulatory calculations. The code can be utilized as a base technology for GEN IV reactor applications

Multiple component codes based generalized LDPC codes for high-speed optical transport.

Science.gov (United States)

Djordjevic, Ivan B; Wang, Ting

2014-07-14

A class of generalized low-density parity-check (GLDPC) codes suitable for optical communications is proposed, which consists of multiple local codes. It is shown that Hamming, BCH, and Reed-Muller codes can be used as local codes, and that the maximum a posteriori probability (MAP) decoding of these local codes by Ashikhmin-Lytsin algorithm is feasible in terms of complexity and performance. We demonstrate that record coding gains can be obtained from properly designed GLDPC codes, derived from multiple component codes. We then show that several recently proposed classes of LDPC codes such as convolutional and spatially-coupled codes can be described using the concept of GLDPC coding, which indicates that the GLDPC coding can be used as a unified platform for advanced FEC enabling ultra-high speed optical transport. The proposed class of GLDPC codes is also suitable for code-rate adaption, to adjust the error correction strength depending on the optical channel conditions.

Vector Network Coding

OpenAIRE

Ebrahimi, Javad; Fragouli, Christina

2010-01-01

We develop new algebraic algorithms for scalar and vector network coding. In vector network coding, the source multicasts information by transmitting vectors of length L, while intermediate nodes process and combine their incoming packets by multiplying them with L X L coding matrices that play a similar role as coding coefficients in scalar coding. Our algorithms for scalar network jointly optimize the employed field size while selecting the coding coefficients. Similarly, for vector co...

Rateless feedback codes

DEFF Research Database (Denmark)

Sørensen, Jesper Hemming; Koike-Akino, Toshiaki; Orlik, Philip

2012-01-01

This paper proposes a concept called rateless feedback coding. We redesign the existing LT and Raptor codes, by introducing new degree distributions for the case when a few feedback opportunities are available. We show that incorporating feedback to LT codes can significantly decrease both...... the coding overhead and the encoding/decoding complexity. Moreover, we show that, at the price of a slight increase in the coding overhead, linear complexity is achieved with Raptor feedback coding....

New quantum codes derived from a family of antiprimitive BCH codes

Science.gov (United States)

Liu, Yang; Li, Ruihu; Lü, Liangdong; Guo, Luobin

The Bose-Chaudhuri-Hocquenghem (BCH) codes have been studied for more than 57 years and have found wide application in classical communication system and quantum information theory. In this paper, we study the construction of quantum codes from a family of q2-ary BCH codes with length n=q2m+1 (also called antiprimitive BCH codes in the literature), where q≥4 is a power of 2 and m≥2. By a detailed analysis of some useful properties about q2-ary cyclotomic cosets modulo n, Hermitian dual-containing conditions for a family of non-narrow-sense antiprimitive BCH codes are presented, which are similar to those of q2-ary primitive BCH codes. Consequently, via Hermitian Construction, a family of new quantum codes can be derived from these dual-containing BCH codes. Some of these new antiprimitive quantum BCH codes are comparable with those derived from primitive BCH codes.

Surface acoustic wave coding for orthogonal frequency coded devices

Science.gov (United States)

Malocha, Donald (Inventor); Kozlovski, Nikolai (Inventor)

2011-01-01

Methods and systems for coding SAW OFC devices to mitigate code collisions in a wireless multi-tag system. Each device producing plural stepped frequencies as an OFC signal with a chip offset delay to increase code diversity. A method for assigning a different OCF to each device includes using a matrix based on the number of OFCs needed and the number chips per code, populating each matrix cell with OFC chip, and assigning the codes from the matrix to the devices. The asynchronous passive multi-tag system includes plural surface acoustic wave devices each producing a different OFC signal having the same number of chips and including a chip offset time delay, an algorithm for assigning OFCs to each device, and a transceiver to transmit an interrogation signal and receive OFC signals in response with minimal code collisions during transmission.

Glomerulonefritis fibrilar: Una rara forma de enfermedad glomerular por depósitos organizados Fibrillary glomerulo-nephritis: A rare form of glomerular disease with organized deposits

Directory of Open Access Journals (Sweden)

Marta B. Cabrera

2011-10-01

Full Text Available Se describe el caso de una mujer de 67 años de edad que consultó por debilidad y astenia, constatándose proteinuria de rango nefrótico y dislipemia. Se realizó punción para biopsia renal, la que se analizó por microscopia óptica, inmunofluorescencia y microscopia electrónica de transmisión. El análisis ultra-estructural reveló la existencia de depósitos fibrilares organizados, rectos, no ramificados, cuyo espesor osciló entre 15 y 20 nm. Dichas fibrillas ópticamente se veían como una expansión mesangial discretamente nodular, ligeramente PAS positiva, rojo Congo negativa y débilmente positiva para IgG. El diagnóstico fue glomerulonefritis fibrilar. Las enfermedades glomerulares por depósitos organizados pueden exhibir superposición sindrómica e histopatológica. Por tal motivo, resulta de importancia una primera separación entre aquellas rojo Congo positivas o negativas, siendo en este último caso la microscopia electrónica de transmisión la que diferencia dos entidades: la glomerulonefritis fibrilar y la glomerulonefritis inmunotactoide. Esta diferencia se apoya no sólo en las características ultraestructurales, sino en sus características clínicas. La glomerulonefritis inmunotactoide muestra una fuerte asociación con procesos linfoproliferativos, a diferencia de lo que ocurre con la glomerulonefritis fibrilar.We describe the case of a 67 year-old female who presented weakness and fatigue. Laboratory data showed nephrotic level of proteinuria and dyslipidemia. A renal biopsy was performed, and studied by light microscopy, immuno-fluorescence and electron microscopy. Ultra-structural analysis revealed the existence of organized fibrillary deposits, straight and without ramifications, the thickness of which ranged from 15 to 20 nm. These fibres were identified, by light microscopy, as slightly nodular mesangial expansions PAS positive, Congo red negative and weakly positive for IgG. Given the above findings, the

Separate Turbo Code and Single Turbo Code Adaptive OFDM Transmissions

Directory of Open Access Journals (Sweden)

Burr Alister

2009-01-01

Full Text Available Abstract This paper discusses the application of adaptive modulation and adaptive rate turbo coding to orthogonal frequency-division multiplexing (OFDM, to increase throughput on the time and frequency selective channel. The adaptive turbo code scheme is based on a subband adaptive method, and compares two adaptive systems: a conventional approach where a separate turbo code is used for each subband, and a single turbo code adaptive system which uses a single turbo code over all subbands. Five modulation schemes (BPSK, QPSK, 8AMPM, 16QAM, and 64QAM are employed and turbo code rates considered are and . The performances of both systems with high ( and low ( BER targets are compared. Simulation results for throughput and BER show that the single turbo code adaptive system provides a significant improvement.

Codes and curves

CERN Document Server

Walker, Judy L

2000-01-01

When information is transmitted, errors are likely to occur. Coding theory examines efficient ways of packaging data so that these errors can be detected, or even corrected. The traditional tools of coding theory have come from combinatorics and group theory. Lately, however, coding theorists have added techniques from algebraic geometry to their toolboxes. In particular, by re-interpreting the Reed-Solomon codes, one can see how to define new codes based on divisors on algebraic curves. For instance, using modular curves over finite fields, Tsfasman, Vladut, and Zink showed that one can define a sequence of codes with asymptotically better parameters than any previously known codes. This monograph is based on a series of lectures the author gave as part of the IAS/PCMI program on arithmetic algebraic geometry. Here, the reader is introduced to the exciting field of algebraic geometric coding theory. Presenting the material in the same conversational tone of the lectures, the author covers linear codes, inclu...

Separate Turbo Code and Single Turbo Code Adaptive OFDM Transmissions

Directory of Open Access Journals (Sweden)

Lei Ye

2009-01-01

Full Text Available This paper discusses the application of adaptive modulation and adaptive rate turbo coding to orthogonal frequency-division multiplexing (OFDM, to increase throughput on the time and frequency selective channel. The adaptive turbo code scheme is based on a subband adaptive method, and compares two adaptive systems: a conventional approach where a separate turbo code is used for each subband, and a single turbo code adaptive system which uses a single turbo code over all subbands. Five modulation schemes (BPSK, QPSK, 8AMPM, 16QAM, and 64QAM are employed and turbo code rates considered are 1/2 and 1/3. The performances of both systems with high (10−2 and low (10−4 BER targets are compared. Simulation results for throughput and BER show that the single turbo code adaptive system provides a significant improvement.

Quantum Codes From Cyclic Codes Over The Ring R 2

International Nuclear Information System (INIS)

Altinel, Alev; Güzeltepe, Murat

2016-01-01

Let R 2 denotes the ring F 2 + μF 2 + υ 2 + μυ F 2 + wF 2 + μwF 2 + υwF 2 + μυwF 2 . In this study, we construct quantum codes from cyclic codes over the ring R 2 , for arbitrary length n, with the restrictions μ 2 = 0, υ 2 = 0, w 2 = 0, μυ = υμ, μw = wμ, υw = wυ and μ (υw) = (μυ) w. Also, we give a necessary and sufficient condition for cyclic codes over R 2 that contains its dual. As a final point, we obtain the parameters of quantum error-correcting codes from cyclic codes over R 2 and we give an example of quantum error-correcting codes form cyclic codes over R 2 . (paper)

Relación entre susceptibilidad magnética y contenido de minerales pesados en un depósito aluvial

Directory of Open Access Journals (Sweden)

Díaz C. Ramiro L.

1993-10-01

Full Text Available

A partir de observaciones realizadas en una perforación a orillas del Rio Nechi en el

Noreste Antioqueño, se muestra la relación directa que existe entre el contenido de minerales en el dep6sito aluvial y la susceptibilidad magnética, relación que se explica por la semejanza en algunas propiedades físicas de dichos minerales. Mediante un análisis del Espectro de Energía, se verifican estas relaciones.

A direct relationship between heavy minerals contents and magnetic susceptibility in an alluvial deposit has been observed in samples taken in a bore hole made at the shore of the Nechi river in NE of the Antioquia Department. These results are explained by the similarity of physical properties of these minerals. Analysis of energy spectrum has verified these relations.

A New Prime Code for Synchronous Optical Code Division Multiple-Access Networks

Directory of Open Access Journals (Sweden)

Huda Saleh Abbas

2018-01-01

Full Text Available A new spreading code based on a prime code for synchronous optical code-division multiple-access networks that can be used in monitoring applications has been proposed. The new code is referred to as “extended grouped new modified prime code.” This new code has the ability to support more terminal devices than other prime codes. In addition, it patches subsequences with “0s” leading to lower power consumption. The proposed code has an improved cross-correlation resulting in enhanced BER performance. The code construction and parameters are provided. The operating performance, using incoherent on-off keying modulation and incoherent pulse position modulation systems, has been analyzed. The performance of the code was compared with other prime codes. The results demonstrate an improved performance, and a BER floor of 10−9 was achieved.

Understanding Mixed Code and Classroom Code-Switching: Myths and Realities

Science.gov (United States)

Li, David C. S.

2008-01-01

Background: Cantonese-English mixed code is ubiquitous in Hong Kong society, and yet using mixed code is widely perceived as improper. This paper presents evidence of mixed code being socially constructed as bad language behavior. In the education domain, an EDB guideline bans mixed code in the classroom. Teachers are encouraged to stick to…

Instrument for Radiation Testing/Screening Electronic Devices over an Extended Temperature Range.

Science.gov (United States)

1986-12-19

CENTER ATTN: STEWS -TE-AN A DE LA PAZ ATTN: CODE 6054 D PLATTETER ATTN: STEWS -TE-AN J MEASON OFC OF THE DEP ASST SEC OF THE NAVY USAG ATTN: L J ABELLA...MAURER ATTN: D LAMB ATTN: D NIELSEN JOHNS HOPKINS UNIVERSITY ATTN: R BELT ATTN: G MASSON/DEPT OF ELEC ENGR ATTN: R GUMM KAMAN SCIENCES CORP HONEYWELL

Development of a coupled code system based on system transient code, RETRAN, and 3-D neutronics code, MASTER

International Nuclear Information System (INIS)

Kim, K. D.; Jung, J. J.; Lee, S. W.; Cho, B. O.; Ji, S. K.; Kim, Y. H.; Seong, C. K.

2002-01-01

A coupled code system of RETRAN/MASTER has been developed for best-estimate simulations of interactions between reactor core neutron kinetics and plant thermal-hydraulics by incorporation of a 3-D reactor core kinetics analysis code, MASTER into system transient code, RETRAN. The soundness of the consolidated code system is confirmed by simulating the MSLB benchmark problem developed to verify the performance of a coupled kinetics and system transient codes by OECD/NEA

QR Codes 101

Science.gov (United States)

Crompton, Helen; LaFrance, Jason; van 't Hooft, Mark

2012-01-01

A QR (quick-response) code is a two-dimensional scannable code, similar in function to a traditional bar code that one might find on a product at the supermarket. The main difference between the two is that, while a traditional bar code can hold a maximum of only 20 digits, a QR code can hold up to 7,089 characters, so it can contain much more…

Some Families of Asymmetric Quantum MDS Codes Constructed from Constacyclic Codes

Science.gov (United States)

Huang, Yuanyuan; Chen, Jianzhang; Feng, Chunhui; Chen, Riqing

2018-02-01

Quantum maximal-distance-separable (MDS) codes that satisfy quantum Singleton bound with different lengths have been constructed by some researchers. In this paper, seven families of asymmetric quantum MDS codes are constructed by using constacyclic codes. We weaken the case of Hermitian-dual containing codes that can be applied to construct asymmetric quantum MDS codes with parameters [[n,k,dz/dx

Theoretical Atomic Physics code development II: ACE: Another collisional excitation code

International Nuclear Information System (INIS)

Clark, R.E.H.; Abdallah, J. Jr.; Csanak, G.; Mann, J.B.; Cowan, R.D.

1988-12-01

A new computer code for calculating collisional excitation data (collision strengths or cross sections) using a variety of models is described. The code uses data generated by the Cowan Atomic Structure code or CATS for the atomic structure. Collisional data are placed on a random access file and can be displayed in a variety of formats using the Theoretical Atomic Physics Code or TAPS. All of these codes are part of the Theoretical Atomic Physics code development effort at Los Alamos. 15 refs., 10 figs., 1 tab

Multiple LDPC decoding for distributed source coding and video coding

DEFF Research Database (Denmark)

Forchhammer, Søren; Luong, Huynh Van; Huang, Xin

2011-01-01

Distributed source coding (DSC) is a coding paradigm for systems which fully or partly exploit the source statistics at the decoder to reduce the computational burden at the encoder. Distributed video coding (DVC) is one example. This paper considers the use of Low Density Parity Check Accumulate...... (LDPCA) codes in a DSC scheme with feed-back. To improve the LDPC coding performance in the context of DSC and DVC, while retaining short encoder blocks, this paper proposes multiple parallel LDPC decoding. The proposed scheme passes soft information between decoders to enhance performance. Experimental...

Prolonged Pulmonary Exposure to Diesel Exhaust Particles Exacerbates Renal Oxidative Stress, Inflammation and DNA Damage in Mice with Adenine-Induced Chronic Renal Failure

Directory of Open Access Journals (Sweden)

Abderrahim Nemmar

2016-05-01

Full Text Available Background/Aims: Epidemiological evidence indicates that patients with chronic kidney diseases have increased susceptibility to adverse outcomes related to long-term exposure to particulate air pollution. However, mechanisms underlying these effects are not fully understood. Methods: Presently, we assessed the effect of prolonged exposure to diesel exhaust particles (DEP on chronic renal failure induced by adenine (0.25% w/w in feed for 4 weeks, which is known to involve inflammation and oxidative stress. DEP (0.5m/kg was intratracheally (i.t. instilled every 4th day for 4 weeks (7 i.t. instillation. Four days following the last exposure to either DEP or saline (control, various renal endpoints were measured. Results: While body weight was decreased, kidney weight increased in DEP+adenine versus saline+adenine or DEP. Water intake, urine volume, relative kidney weight were significantly increased in adenine+DEP versus DEP and adenine+saline versus saline. Plasma creatinine and urea increased and creatinine clearance decreased in adenine+DEP versus DEP and adenine+saline versus saline. Tumor necrosis factor α, lipid peroxidation and reactive oxygen species were significantly increased in adenine+DEP compared with either DEP or adenine+saline. The antioxidant calase was significantly decreased in adenine+DEP compared with either adenine+saline or DEP. Notably, renal DNA damage was significantly potentiated in adenine+DEP compared with either adenine+saline or DEP. Similarly, systolic blood pressure was increased in adenine+DEP versus adenine+saline or DEP, and in DEP versus saline. Histological evaluation revealed more collagen deposition, higher number of necrotic cell counts and dilated tubules, cast formation and collapsing glomeruli in adenine+DEP versus adenine+saline or DEP. Conclusion: Prolonged pulmonary exposure to diesel exhaust particles worsen renal oxidative stress, inflammation and DNA damage in mice with adenine-induced chronic

Error-correction coding and decoding bounds, codes, decoders, analysis and applications

CERN Document Server

Tomlinson, Martin; Ambroze, Marcel A; Ahmed, Mohammed; Jibril, Mubarak

2017-01-01

This book discusses both the theory and practical applications of self-correcting data, commonly known as error-correcting codes. The applications included demonstrate the importance of these codes in a wide range of everyday technologies, from smartphones to secure communications and transactions. Written in a readily understandable style, the book presents the authors’ twenty-five years of research organized into five parts: Part I is concerned with the theoretical performance attainable by using error correcting codes to achieve communications efficiency in digital communications systems. Part II explores the construction of error-correcting codes and explains the different families of codes and how they are designed. Techniques are described for producing the very best codes. Part III addresses the analysis of low-density parity-check (LDPC) codes, primarily to calculate their stopping sets and low-weight codeword spectrum which determines the performance of these codes. Part IV deals with decoders desi...

Error floor behavior study of LDPC codes for concatenated codes design

Science.gov (United States)

Chen, Weigang; Yin, Liuguo; Lu, Jianhua

2007-11-01

Error floor behavior of low-density parity-check (LDPC) codes using quantized decoding algorithms is statistically studied with experimental results on a hardware evaluation platform. The results present the distribution of the residual errors after decoding failure and reveal that the number of residual error bits in a codeword is usually very small using quantized sum-product (SP) algorithm. Therefore, LDPC code may serve as the inner code in a concatenated coding system with a high code rate outer code and thus an ultra low error floor can be achieved. This conclusion is also verified by the experimental results.

Reactor lattice codes

International Nuclear Information System (INIS)

Kulikowska, T.

1999-01-01

The present lecture has a main goal to show how the transport lattice calculations are realised in a standard computer code. This is illustrated on the example of the WIMSD code, belonging to the most popular tools for reactor calculations. Most of the approaches discussed here can be easily modified to any other lattice code. The description of the code assumes the basic knowledge of reactor lattice, on the level given in the lecture on 'Reactor lattice transport calculations'. For more advanced explanation of the WIMSD code the reader is directed to the detailed descriptions of the code cited in References. The discussion of the methods and models included in the code is followed by the generally used homogenisation procedure and several numerical examples of discrepancies in calculated multiplication factors based on different sources of library data. (author)

CodeArmor : Virtualizing the Code Space to Counter Disclosure Attacks

NARCIS (Netherlands)

Chen, Xi; Bos, Herbert; Giuffrida, Cristiano

2017-01-01

Code diversification is an effective strategy to prevent modern code-reuse exploits. Unfortunately, diversification techniques are inherently vulnerable to information disclosure. Recent diversification-aware ROP exploits have demonstrated that code disclosure attacks are a realistic threat, with an

An Evaluation of Automated Code Generation with the PetriCode Approach

DEFF Research Database (Denmark)

Simonsen, Kent Inge

2014-01-01

Automated code generation is an important element of model driven development methodologies. We have previously proposed an approach for code generation based on Coloured Petri Net models annotated with textual pragmatics for the network protocol domain. In this paper, we present and evaluate thr...... important properties of our approach: platform independence, code integratability, and code readability. The evaluation shows that our approach can generate code for a wide range of platforms which is integratable and readable....

Advanced video coding systems

CERN Document Server

Gao, Wen

2015-01-01

This comprehensive and accessible text/reference presents an overview of the state of the art in video coding technology. Specifically, the book introduces the tools of the AVS2 standard, describing how AVS2 can help to achieve a significant improvement in coding efficiency for future video networks and applications by incorporating smarter coding tools such as scene video coding. Topics and features: introduces the basic concepts in video coding, and presents a short history of video coding technology and standards; reviews the coding framework, main coding tools, and syntax structure of AV

Cracking the code: the accuracy of coding shoulder procedures and the repercussions.

Science.gov (United States)

Clement, N D; Murray, I R; Nie, Y X; McBirnie, J M

2013-05-01

Coding of patients' diagnosis and surgical procedures is subject to error levels of up to 40% with consequences on distribution of resources and financial recompense. Our aim was to explore and address reasons behind coding errors of shoulder diagnosis and surgical procedures and to evaluate a potential solution. A retrospective review of 100 patients who had undergone surgery was carried out. Coding errors were identified and the reasons explored. A coding proforma was designed to address these errors and was prospectively evaluated for 100 patients. The financial implications were also considered. Retrospective analysis revealed the correct primary diagnosis was assigned in 54 patients (54%) had an entirely correct diagnosis, and only 7 (7%) patients had a correct procedure code assigned. Coders identified indistinct clinical notes and poor clarity of procedure codes as reasons for errors. The proforma was significantly more likely to assign the correct diagnosis (odds ratio 18.2, p code (odds ratio 310.0, p coding department. High error levels for coding are due to misinterpretation of notes and ambiguity of procedure codes. This can be addressed by allowing surgeons to assign the diagnosis and procedure using a simplified list that is passed directly to coding.

Construction of new quantum MDS codes derived from constacyclic codes

Science.gov (United States)

Taneja, Divya; Gupta, Manish; Narula, Rajesh; Bhullar, Jaskaran

Obtaining quantum maximum distance separable (MDS) codes from dual containing classical constacyclic codes using Hermitian construction have paved a path to undertake the challenges related to such constructions. Using the same technique, some new parameters of quantum MDS codes have been constructed here. One set of parameters obtained in this paper has achieved much larger distance than work done earlier. The remaining constructed parameters of quantum MDS codes have large minimum distance and were not explored yet.

Vector Network Coding Algorithms

OpenAIRE

Ebrahimi, Javad; Fragouli, Christina

2010-01-01

We develop new algebraic algorithms for scalar and vector network coding. In vector network coding, the source multicasts information by transmitting vectors of length L, while intermediate nodes process and combine their incoming packets by multiplying them with L x L coding matrices that play a similar role as coding c in scalar coding. Our algorithms for scalar network jointly optimize the employed field size while selecting the coding coefficients. Similarly, for vector coding, our algori...

Code-Mixing and Code Switchingin The Process of Learning

Directory of Open Access Journals (Sweden)

Diyah Atiek Mustikawati

2016-09-01

Full Text Available This study aimed to describe a form of code switching and code mixing specific form found in the teaching and learning activities in the classroom as well as determining factors influencing events stand out that form of code switching and code mixing in question.Form of this research is descriptive qualitative case study which took place in Al Mawaddah Boarding School Ponorogo. Based on the analysis and discussion that has been stated in the previous chapter that the form of code mixing and code switching learning activities in Al Mawaddah Boarding School is in between the use of either language Java language, Arabic, English and Indonesian, on the use of insertion of words, phrases, idioms, use of nouns, adjectives, clauses, and sentences. Code mixing deciding factor in the learning process include: Identification of the role, the desire to explain and interpret, sourced from the original language and its variations, is sourced from a foreign language. While deciding factor in the learning process of code, includes: speakers (O1, partners speakers (O2, the presence of a third person (O3, the topic of conversation, evoke a sense of humour, and just prestige. The significance of this study is to allow readers to see the use of language in a multilingual society, especially in AL Mawaddah boarding school about the rules and characteristics variation in the language of teaching and learning activities in the classroom. Furthermore, the results of this research will provide input to the ustadz / ustadzah and students in developing oral communication skills and the effectiveness of teaching and learning strategies in boarding schools.

Using Coding Apps to Support Literacy Instruction and Develop Coding Literacy

Science.gov (United States)

Hutchison, Amy; Nadolny, Larysa; Estapa, Anne

2016-01-01

In this article the authors present the concept of Coding Literacy and describe the ways in which coding apps can support the development of Coding Literacy and disciplinary and digital literacy skills. Through detailed examples, we describe how coding apps can be integrated into literacy instruction to support learning of the Common Core English…

Low Complexity List Decoding for Polar Codes with Multiple CRC Codes

Directory of Open Access Journals (Sweden)

Jong-Hwan Kim

2017-04-01

Full Text Available Polar codes are the first family of error correcting codes that provably achieve the capacity of symmetric binary-input discrete memoryless channels with low complexity. Since the development of polar codes, there have been many studies to improve their finite-length performance. As a result, polar codes are now adopted as a channel code for the control channel of 5G new radio of the 3rd generation partnership project. However, the decoder implementation is one of the big practical problems and low complexity decoding has been studied. This paper addresses a low complexity successive cancellation list decoding for polar codes utilizing multiple cyclic redundancy check (CRC codes. While some research uses multiple CRC codes to reduce memory and time complexity, we consider the operational complexity of decoding, and reduce it by optimizing CRC positions in combination with a modified decoding operation. Resultingly, the proposed scheme obtains not only complexity reduction from early stopping of decoding, but also additional reduction from the reduced number of decoding paths.

Majorana fermion codes

International Nuclear Information System (INIS)

Bravyi, Sergey; Terhal, Barbara M; Leemhuis, Bernhard

2010-01-01

We initiate the study of Majorana fermion codes (MFCs). These codes can be viewed as extensions of Kitaev's one-dimensional (1D) model of unpaired Majorana fermions in quantum wires to higher spatial dimensions and interacting fermions. The purpose of MFCs is to protect quantum information against low-weight fermionic errors, that is, operators acting on sufficiently small subsets of fermionic modes. We examine to what extent MFCs can surpass qubit stabilizer codes in terms of their stability properties. A general construction of 2D MFCs is proposed that combines topological protection based on a macroscopic code distance with protection based on fermionic parity conservation. Finally, we use MFCs to show how to transform any qubit stabilizer code to a weakly self-dual CSS code.

DISP1 code

International Nuclear Information System (INIS)

Vokac, P.

1999-12-01

DISP1 code is a simple tool for assessment of the dispersion of the fission product cloud escaping from a nuclear power plant after an accident. The code makes it possible to tentatively check the feasibility of calculations by more complex PSA3 codes and/or codes for real-time dispersion calculations. The number of input parameters is reasonably low and the user interface is simple enough to allow a rapid processing of sensitivity analyses. All input data entered through the user interface are stored in the text format. Implementation of dispersion model corrections taken from the ARCON96 code enables the DISP1 code to be employed for assessment of the radiation hazard within the NPP area, in the control room for instance. (P.A.)

Depósito electroquímico de recubrimientos compuestos de Ni-SiC y evaluación de su comportamiento anticorrosivo

Directory of Open Access Journals (Sweden)

Johny Edwar Henao Guzmán

2009-01-01

Full Text Available En el presente estudio se reporta la obtención de recubrimientos de Ni puro y compuestos de Ni con partículas nanométricas de SiC. Los recubrimientos fueron depositados sobre sustratos de acero al carbono AISI-SAE 1016 mediante polarización lineal sobre un electrodo de disco rotatorio, variando la velocidad de rotación y el contenido de partículas de SiC en el baño. Los recubrimientos fueron obtenidos a partir de una solución tipo Watts clásica, en la cual se adicionaron nanopartículas de SiC. Las propiedades anticorrosivas de los recubrimientos se estudiaron mediante técnicas electroquímicas y ensayos de corrosión-erosión. La microestructura de los recubrimientos se estudió mediante microscopía óptica. Se encontró que a medida que aumenta la cantidad de partículas en los recubrimientos aumenta la nobleza y la resistencia a la corrosión-erosión de los mismos. De la misma manera las propiedades mecánicas de los recubrimientos mejoran notablemente con el incremento de la cantidad de partícula en el depósito y con el aumento de la velocidad de agitación del baño durante la electrodeposición.

Fundamentals of convolutional coding

CERN Document Server

Johannesson, Rolf

2015-01-01

Fundamentals of Convolutional Coding, Second Edition, regarded as a bible of convolutional coding brings you a clear and comprehensive discussion of the basic principles of this field * Two new chapters on low-density parity-check (LDPC) convolutional codes and iterative coding * Viterbi, BCJR, BEAST, list, and sequential decoding of convolutional codes * Distance properties of convolutional codes * Includes a downloadable solutions manual

Prolonged Pulmonary Exposure to Diesel Exhaust Particles Exacerbates Renal Oxidative Stress, Inflammation and DNA Damage in Mice with Adenine-Induced Chronic Renal Failure.

Science.gov (United States)

Nemmar, Abderrahim; Karaca, Turan; Beegam, Sumaya; Yuvaraju, Priya; Yasin, Javed; Hamadi, Naserddine Kamel; Ali, Badreldin H

2016-01-01

Epidemiological evidence indicates that patients with chronic kidney diseases have increased susceptibility to adverse outcomes related to long-term exposure to particulate air pollution. However, mechanisms underlying these effects are not fully understood. Presently, we assessed the effect of prolonged exposure to diesel exhaust particles (DEP) on chronic renal failure induced by adenine (0.25% w/w in feed for 4 weeks), which is known to involve inflammation and oxidative stress. DEP (0.5m/kg) was intratracheally (i.t.) instilled every 4th day for 4 weeks (7 i.t. instillation). Four days following the last exposure to either DEP or saline (control), various renal endpoints were measured. While body weight was decreased, kidney weight increased in DEP+adenine versus saline+adenine or DEP. Water intake, urine volume, relative kidney weight were significantly increased in adenine+DEP versus DEP and adenine+saline versus saline. Plasma creatinine and urea increased and creatinine clearance decreased in adenine+DEP versus DEP and adenine+saline versus saline. Tumor necrosis factor α, lipid peroxidation and reactive oxygen species were significantly increased in adenine+DEP compared with either DEP or adenine+saline. The antioxidant calase was significantly decreased in adenine+DEP compared with either adenine+saline or DEP. Notably, renal DNA damage was significantly potentiated in adenine+DEP compared with either adenine+saline or DEP. Similarly, systolic blood pressure was increased in adenine+DEP versus adenine+saline or DEP, and in DEP versus saline. Histological evaluation revealed more collagen deposition, higher number of necrotic cell counts and dilated tubules, cast formation and collapsing glomeruli in adenine+DEP versus adenine+saline or DEP. Prolonged pulmonary exposure to diesel exhaust particles worsen renal oxidative stress, inflammation and DNA damage in mice with adenine-induced chronic renal failure. Our data provide biological plausibility that air

78 FR 18321 - International Code Council: The Update Process for the International Codes and Standards

Science.gov (United States)

2013-03-26

... Energy Conservation Code. International Existing Building Code. International Fire Code. International... Code. International Property Maintenance Code. International Residential Code. International Swimming Pool and Spa Code International Wildland-Urban Interface Code. International Zoning Code. ICC Standards...

Two-terminal video coding.

Science.gov (United States)

Yang, Yang; Stanković, Vladimir; Xiong, Zixiang; Zhao, Wei

2009-03-01

Following recent works on the rate region of the quadratic Gaussian two-terminal source coding problem and limit-approaching code designs, this paper examines multiterminal source coding of two correlated, i.e., stereo, video sequences to save the sum rate over independent coding of both sequences. Two multiterminal video coding schemes are proposed. In the first scheme, the left sequence of the stereo pair is coded by H.264/AVC and used at the joint decoder to facilitate Wyner-Ziv coding of the right video sequence. The first I-frame of the right sequence is successively coded by H.264/AVC Intracoding and Wyner-Ziv coding. An efficient stereo matching algorithm based on loopy belief propagation is then adopted at the decoder to produce pixel-level disparity maps between the corresponding frames of the two decoded video sequences on the fly. Based on the disparity maps, side information for both motion vectors and motion-compensated residual frames of the right sequence are generated at the decoder before Wyner-Ziv encoding. In the second scheme, source splitting is employed on top of classic and Wyner-Ziv coding for compression of both I-frames to allow flexible rate allocation between the two sequences. Experiments with both schemes on stereo video sequences using H.264/AVC, LDPC codes for Slepian-Wolf coding of the motion vectors, and scalar quantization in conjunction with LDPC codes for Wyner-Ziv coding of the residual coefficients give a slightly lower sum rate than separate H.264/AVC coding of both sequences at the same video quality.

The network code

International Nuclear Information System (INIS)

1997-01-01

The Network Code defines the rights and responsibilities of all users of the natural gas transportation system in the liberalised gas industry in the United Kingdom. This report describes the operation of the Code, what it means, how it works and its implications for the various participants in the industry. The topics covered are: development of the competitive gas market in the UK; key points in the Code; gas transportation charging; impact of the Code on producers upstream; impact on shippers; gas storage; supply point administration; impact of the Code on end users; the future. (20 tables; 33 figures) (UK)

XSOR codes users manual

International Nuclear Information System (INIS)

Jow, Hong-Nian; Murfin, W.B.; Johnson, J.D.

1993-11-01

This report describes the source term estimation codes, XSORs. The codes are written for three pressurized water reactors (Surry, Sequoyah, and Zion) and two boiling water reactors (Peach Bottom and Grand Gulf). The ensemble of codes has been named ''XSOR''. The purpose of XSOR codes is to estimate the source terms which would be released to the atmosphere in severe accidents. A source term includes the release fractions of several radionuclide groups, the timing and duration of releases, the rates of energy release, and the elevation of releases. The codes have been developed by Sandia National Laboratories for the US Nuclear Regulatory Commission (NRC) in support of the NUREG-1150 program. The XSOR codes are fast running parametric codes and are used as surrogates for detailed mechanistic codes. The XSOR codes also provide the capability to explore the phenomena and their uncertainty which are not currently modeled by the mechanistic codes. The uncertainty distributions of input parameters may be used by an. XSOR code to estimate the uncertainty of source terms

Rate-adaptive BCH coding for Slepian-Wolf coding of highly correlated sources

DEFF Research Database (Denmark)

Forchhammer, Søren; Salmistraro, Matteo; Larsen, Knud J.

2012-01-01

This paper considers using BCH codes for distributed source coding using feedback. The focus is on coding using short block lengths for a binary source, X, having a high correlation between each symbol to be coded and a side information, Y, such that the marginal probability of each symbol, Xi in X......, given Y is highly skewed. In the analysis, noiseless feedback and noiseless communication are assumed. A rate-adaptive BCH code is presented and applied to distributed source coding. Simulation results for a fixed error probability show that rate-adaptive BCH achieves better performance than LDPCA (Low......-Density Parity-Check Accumulate) codes for high correlation between source symbols and the side information....

Coding in Muscle Disease.

Science.gov (United States)

Jones, Lyell K; Ney, John P

2016-12-01

Accurate coding is critically important for clinical practice and research. Ongoing changes to diagnostic and billing codes require the clinician to stay abreast of coding updates. Payment for health care services, data sets for health services research, and reporting for medical quality improvement all require accurate administrative coding. This article provides an overview of administrative coding for patients with muscle disease and includes a case-based review of diagnostic and Evaluation and Management (E/M) coding principles in patients with myopathy. Procedural coding for electrodiagnostic studies and neuromuscular ultrasound is also reviewed.

Generalized concatenated quantum codes

International Nuclear Information System (INIS)

Grassl, Markus; Shor, Peter; Smith, Graeme; Smolin, John; Zeng Bei

2009-01-01

We discuss the concept of generalized concatenated quantum codes. This generalized concatenation method provides a systematical way for constructing good quantum codes, both stabilizer codes and nonadditive codes. Using this method, we construct families of single-error-correcting nonadditive quantum codes, in both binary and nonbinary cases, which not only outperform any stabilizer codes for finite block length but also asymptotically meet the quantum Hamming bound for large block length.

Synthesizing Certified Code

OpenAIRE

Whalen, Michael; Schumann, Johann; Fischer, Bernd

2002-01-01

Code certification is a lightweight approach for formally demonstrating software quality. Its basic idea is to require code producers to provide formal proofs that their code satisfies certain quality properties. These proofs serve as certificates that can be checked independently. Since code certification uses the same underlying technology as program verification, it requires detailed annotations (e.g., loop invariants) to make the proofs possible. However, manually adding annotations to th...

Impacto ambiental por metales pesados en suelos y plantas del entorno de un depósito de chatarra procedente de automóviles de desguace

Directory of Open Access Journals (Sweden)

Chicharro, A.

1998-05-01

Full Text Available The contaminant impact of cadmium, chromium, copper, nickel, lead and zinc on soils and vegetation in the surroundings of a scrapyard of discarded vehicles, taken at several distances of the contaminant source, is evaluated and compared with control samples free of contamination. The total metal contents of these elements in the soils and vegetation samples are determined by ICP-AES and their presence in soils is detected by particles analysis with SEM-EDXRA. The contents of the affected soils are remarkably higher than the ones of a control sample for the all elements and gradually decrease from the contaminant source. These contents in plants are also relevantly higher than the values of the control sample, and are especially high for the aereal parts. This remarkable contamination, moreover the great retention capacity of these soils, due to their edaphical characteristics, and the presence of a great quantity of not-mineral particles, may indicate that the probable access path of the metal contaminants to the plants could be the atmospherical dispersion of the particles generated by the scrapyard activities (burning and transformation of the vehicles scrap.

Se evalúa el impacto contaminante de cadmio, cromo, cobre, níquel, plomo y cinc en suelos y vegetación del entorno de un depósito de chatarra de automóviles, a diferentes distancias del mismo, tomando como referencia muestras control no contaminadas. Los contenidos totales de dichos elementos en muestras de suelos y plantas se determinan mediante ICP-AES, y su presencia en suelos mediante análisis de partículas por SEM-EDXRA. En los suelos, se detectan contenidos muy superiores a los de una muestra control para todos los elementos, que decrecen de forma gradual desde el foco contaminante. Estos contenidos en las plantas también son muy superiores a los valores de la muestra control, siendo especialmente elevados en las partes aéreas. Esta alta contaminación de las partes

Coding Labour

Directory of Open Access Journals (Sweden)

Anthony McCosker

2014-03-01

Full Text Available As well as introducing the Coding Labour section, the authors explore the diffusion of code across the material contexts of everyday life, through the objects and tools of mediation, the systems and practices of cultural production and organisational management, and in the material conditions of labour. Taking code beyond computation and software, their specific focus is on the increasingly familiar connections between code and labour with a focus on the codification and modulation of affect through technologies and practices of management within the contemporary work organisation. In the grey literature of spreadsheets, minutes, workload models, email and the like they identify a violence of forms through which workplace affect, in its constant flux of crisis and ‘prodromal’ modes, is regulated and governed.

Interface requirements to couple thermal-hydraulic codes to 3D neutronic codes

Energy Technology Data Exchange (ETDEWEB)

Langenbuch, S.; Austregesilo, H.; Velkov, K. [GRS, Garching (Germany)] [and others

1997-07-01

The present situation of thermalhydraulics codes and 3D neutronics codes is briefly described and general considerations for coupling of these codes are discussed. Two different basic approaches of coupling are identified and their relative advantages and disadvantages are discussed. The implementation of the coupling for 3D neutronics codes in the system ATHLET is presented. Meanwhile, this interface is used for coupling three different 3D neutronics codes.

Interface requirements to couple thermal-hydraulic codes to 3D neutronic codes

International Nuclear Information System (INIS)

Langenbuch, S.; Austregesilo, H.; Velkov, K.

1997-01-01

The present situation of thermalhydraulics codes and 3D neutronics codes is briefly described and general considerations for coupling of these codes are discussed. Two different basic approaches of coupling are identified and their relative advantages and disadvantages are discussed. The implementation of the coupling for 3D neutronics codes in the system ATHLET is presented. Meanwhile, this interface is used for coupling three different 3D neutronics codes

Synthesizing Certified Code

Science.gov (United States)

Whalen, Michael; Schumann, Johann; Fischer, Bernd

2002-01-01

Code certification is a lightweight approach to demonstrate software quality on a formal level. Its basic idea is to require producers to provide formal proofs that their code satisfies certain quality properties. These proofs serve as certificates which can be checked independently. Since code certification uses the same underlying technology as program verification, it also requires many detailed annotations (e.g., loop invariants) to make the proofs possible. However, manually adding theses annotations to the code is time-consuming and error-prone. We address this problem by combining code certification with automatic program synthesis. We propose an approach to generate simultaneously, from a high-level specification, code and all annotations required to certify generated code. Here, we describe a certification extension of AUTOBAYES, a synthesis tool which automatically generates complex data analysis programs from compact specifications. AUTOBAYES contains sufficient high-level domain knowledge to generate detailed annotations. This allows us to use a general-purpose verification condition generator to produce a set of proof obligations in first-order logic. The obligations are then discharged using the automated theorem E-SETHEO. We demonstrate our approach by certifying operator safety for a generated iterative data classification program without manual annotation of the code.

Report number codes

Energy Technology Data Exchange (ETDEWEB)

Nelson, R.N. (ed.)

1985-05-01

This publication lists all report number codes processed by the Office of Scientific and Technical Information. The report codes are substantially based on the American National Standards Institute, Standard Technical Report Number (STRN)-Format and Creation Z39.23-1983. The Standard Technical Report Number (STRN) provides one of the primary methods of identifying a specific technical report. The STRN consists of two parts: The report code and the sequential number. The report code identifies the issuing organization, a specific program, or a type of document. The sequential number, which is assigned in sequence by each report issuing entity, is not included in this publication. Part I of this compilation is alphabetized by report codes followed by issuing installations. Part II lists the issuing organization followed by the assigned report code(s). In both Parts I and II, the names of issuing organizations appear for the most part in the form used at the time the reports were issued. However, for some of the more prolific installations which have had name changes, all entries have been merged under the current name.

Report number codes

International Nuclear Information System (INIS)

Nelson, R.N.

1985-05-01

This publication lists all report number codes processed by the Office of Scientific and Technical Information. The report codes are substantially based on the American National Standards Institute, Standard Technical Report Number (STRN)-Format and Creation Z39.23-1983. The Standard Technical Report Number (STRN) provides one of the primary methods of identifying a specific technical report. The STRN consists of two parts: The report code and the sequential number. The report code identifies the issuing organization, a specific program, or a type of document. The sequential number, which is assigned in sequence by each report issuing entity, is not included in this publication. Part I of this compilation is alphabetized by report codes followed by issuing installations. Part II lists the issuing organization followed by the assigned report code(s). In both Parts I and II, the names of issuing organizations appear for the most part in the form used at the time the reports were issued. However, for some of the more prolific installations which have had name changes, all entries have been merged under the current name

Performance Analysis of CRC Codes for Systematic and Nonsystematic Polar Codes with List Decoding

Directory of Open Access Journals (Sweden)

Takumi Murata

2018-01-01

Full Text Available Successive cancellation list (SCL decoding of polar codes is an effective approach that can significantly outperform the original successive cancellation (SC decoding, provided that proper cyclic redundancy-check (CRC codes are employed at the stage of candidate selection. Previous studies on CRC-assisted polar codes mostly focus on improvement of the decoding algorithms as well as their implementation, and little attention has been paid to the CRC code structure itself. For the CRC-concatenated polar codes with CRC code as their outer code, the use of longer CRC code leads to reduction of information rate, whereas the use of shorter CRC code may reduce the error detection probability, thus degrading the frame error rate (FER performance. Therefore, CRC codes of proper length should be employed in order to optimize the FER performance for a given signal-to-noise ratio (SNR per information bit. In this paper, we investigate the effect of CRC codes on the FER performance of polar codes with list decoding in terms of the CRC code length as well as its generator polynomials. Both the original nonsystematic and systematic polar codes are considered, and we also demonstrate that different behaviors of CRC codes should be observed depending on whether the inner polar code is systematic or not.

Z₂-double cyclic codes

OpenAIRE

Borges, J.

2014-01-01

A binary linear code C is a Z2-double cyclic code if the set of coordinates can be partitioned into two subsets such that any cyclic shift of the coordinates of both subsets leaves invariant the code. These codes can be identified as submodules of the Z2[x]-module Z2[x]/(x^r − 1) × Z2[x]/(x^s − 1). We determine the structure of Z2-double cyclic codes giving the generator polynomials of these codes. The related polynomial representation of Z2-double cyclic codes and its duals, and the relation...

A comparative analysis of in vitro toxicity of diesel exhaust particles from combustion of 1st- and 2nd-generation biodiesel fuels in relation to their physicochemical properties-the FuelHealth project.

Science.gov (United States)

Lankoff, Anna; Brzoska, Kamil; Czarnocka, Joanna; Kowalska, Magdalena; Lisowska, Halina; Mruk, Remigiusz; Øvrevik, Johan; Wegierek-Ciuk, Aneta; Zuberek, Mariusz; Kruszewski, Marcin

2017-08-01

Biodiesels represent more carbon-neutral fuels and are introduced at an increasing extent to reduce emission of greenhouse gases. However, the potential impact of different types and blend concentrations of biodiesel on the toxicity of diesel engine emissions are still relatively scarce and to some extent contradictory. The objective of the present work was to compare the toxicity of diesel exhaust particles (DEP) from combustion of two 1st-generation fuels: 7% fatty acid methyl esters (FAME; B7) and 20% FAME (B20) and a 2nd-generation 20% FAME/HVO (synthetic hydrocarbon biofuel (SHB)) fuel. Our findings indicate that particulate emissions of each type of biodiesel fuel induce cytotoxic effects in BEAS-2B and A549 cells, manifested as cell death (apoptosis or necrosis), decreased protein concentrations, intracellular ROS production, as well as increased expression of antioxidant genes and genes coding for DNA damage-response proteins. The different biodiesel blend percentages and biodiesel feedstocks led to marked differences in chemical composition of the emitted DEP. The different DEPs also displayed statistically significant differences in cytotoxicity in A549 and BEAS-2B cells, but the magnitude of these variations was limited. Overall, it seems that increasing biodiesel blend concentrations from the current 7 to 20% FAME, or substituting 1st-generation FAME biodiesel with 2nd-generation HVO biodiesel (at least below 20% blends), affects the in vitro toxicity of the emitted DEP to some extent, but the biological significance of this may be moderate.

Strict optical orthogonal codes for purely asynchronous code-division multiple-access applications

Science.gov (United States)

Zhang, Jian-Guo

1996-12-01

Strict optical orthogonal codes are presented for purely asynchronous optical code-division multiple-access (CDMA) applications. The proposed code can strictly guarantee the peaks of its cross-correlation functions and the sidelobes of any of its autocorrelation functions to have a value of 1 in purely asynchronous data communications. The basic theory of the proposed codes is given. An experiment on optical CDMA systems is also demonstrated to verify the characteristics of the proposed code.

Entropy Coding in HEVC

OpenAIRE

Sze, Vivienne; Marpe, Detlev

2014-01-01

Context-Based Adaptive Binary Arithmetic Coding (CABAC) is a method of entropy coding first introduced in H.264/AVC and now used in the latest High Efficiency Video Coding (HEVC) standard. While it provides high coding efficiency, the data dependencies in H.264/AVC CABAC make it challenging to parallelize and thus limit its throughput. Accordingly, during the standardization of entropy coding for HEVC, both aspects of coding efficiency and throughput were considered. This chapter describes th...

Quantum Codes From Negacyclic Codes over Group Ring ( Fq + υFq) G

International Nuclear Information System (INIS)

Koroglu, Mehmet E.; Siap, Irfan

2016-01-01

In this paper, we determine self dual and self orthogonal codes arising from negacyclic codes over the group ring ( F q + υF q ) G . By taking a suitable Gray image of these codes we obtain many good parameter quantum error-correcting codes over F q . (paper)

Trellis and turbo coding iterative and graph-based error control coding

CERN Document Server

Schlegel, Christian B

2015-01-01

This new edition has been extensively revised to reflect the progress in error control coding over the past few years. Over 60% of the material has been completely reworked, and 30% of the material is original. Convolutional, turbo, and low density parity-check (LDPC) coding and polar codes in a unified framework. Advanced research-related developments such as spatial coupling. A focus on algorithmic and implementation aspects of error control coding.

Syndrome-source-coding and its universal generalization. [error correcting codes for data compression

Science.gov (United States)

Ancheta, T. C., Jr.

1976-01-01

A method of using error-correcting codes to obtain data compression, called syndrome-source-coding, is described in which the source sequence is treated as an error pattern whose syndrome forms the compressed data. It is shown that syndrome-source-coding can achieve arbitrarily small distortion with the number of compressed digits per source digit arbitrarily close to the entropy of a binary memoryless source. A 'universal' generalization of syndrome-source-coding is formulated which provides robustly effective distortionless coding of source ensembles. Two examples are given, comparing the performance of noiseless universal syndrome-source-coding to (1) run-length coding and (2) Lynch-Davisson-Schalkwijk-Cover universal coding for an ensemble of binary memoryless sources.

ComboCoding: Combined intra-/inter-flow network coding for TCP over disruptive MANETs

Directory of Open Access Journals (Sweden)

Chien-Chia Chen

2011-07-01

Full Text Available TCP over wireless networks is challenging due to random losses and ACK interference. Although network coding schemes have been proposed to improve TCP robustness against extreme random losses, a critical problem still remains of DATA–ACK interference. To address this issue, we use inter-flow coding between DATA and ACK to reduce the number of transmissions among nodes. In addition, we also utilize a “pipeline” random linear coding scheme with adaptive redundancy to overcome high packet loss over unreliable links. The resulting coding scheme, ComboCoding, combines intra-flow and inter-flow coding to provide robust TCP transmission in disruptive wireless networks. The main contributions of our scheme are twofold; the efficient combination of random linear coding and XOR coding on bi-directional streams (DATA and ACK, and the novel redundancy control scheme that adapts to time-varying and space-varying link loss. The adaptive ComboCoding was tested on a variable hop string topology with unstable links and on a multipath MANET with dynamic topology. Simulation results show that TCP with ComboCoding delivers higher throughput than with other coding options in high loss and mobile scenarios, while introducing minimal overhead in normal operation.

Performance analysis of WS-EWC coded optical CDMA networks with/without LDPC codes

Science.gov (United States)

Huang, Chun-Ming; Huang, Jen-Fa; Yang, Chao-Chin

2010-10-01

One extended Welch-Costas (EWC) code family for the wavelength-division-multiplexing/spectral-amplitude coding (WDM/SAC; WS) optical code-division multiple-access (OCDMA) networks is proposed. This system has a superior performance as compared to the previous modified quadratic congruence (MQC) coded OCDMA networks. However, since the performance of such a network is unsatisfactory when the data bit rate is higher, one class of quasi-cyclic low-density parity-check (QC-LDPC) code is adopted to improve that. Simulation results show that the performance of the high-speed WS-EWC coded OCDMA network can be greatly improved by using the LDPC codes.

Semi-supervised sparse coding

KAUST Repository

Wang, Jim Jing-Yan; Gao, Xin

2014-01-01

Sparse coding approximates the data sample as a sparse linear combination of some basic codewords and uses the sparse codes as new presentations. In this paper, we investigate learning discriminative sparse codes by sparse coding in a semi-supervised manner, where only a few training samples are labeled. By using the manifold structure spanned by the data set of both labeled and unlabeled samples and the constraints provided by the labels of the labeled samples, we learn the variable class labels for all the samples. Furthermore, to improve the discriminative ability of the learned sparse codes, we assume that the class labels could be predicted from the sparse codes directly using a linear classifier. By solving the codebook, sparse codes, class labels and classifier parameters simultaneously in a unified objective function, we develop a semi-supervised sparse coding algorithm. Experiments on two real-world pattern recognition problems demonstrate the advantage of the proposed methods over supervised sparse coding methods on partially labeled data sets.

Semi-supervised sparse coding

KAUST Repository

Wang, Jim Jing-Yan

2014-07-06

Sparse coding approximates the data sample as a sparse linear combination of some basic codewords and uses the sparse codes as new presentations. In this paper, we investigate learning discriminative sparse codes by sparse coding in a semi-supervised manner, where only a few training samples are labeled. By using the manifold structure spanned by the data set of both labeled and unlabeled samples and the constraints provided by the labels of the labeled samples, we learn the variable class labels for all the samples. Furthermore, to improve the discriminative ability of the learned sparse codes, we assume that the class labels could be predicted from the sparse codes directly using a linear classifier. By solving the codebook, sparse codes, class labels and classifier parameters simultaneously in a unified objective function, we develop a semi-supervised sparse coding algorithm. Experiments on two real-world pattern recognition problems demonstrate the advantage of the proposed methods over supervised sparse coding methods on partially labeled data sets.

Joint design of QC-LDPC codes for coded cooperation system with joint iterative decoding

Science.gov (United States)

Zhang, Shunwai; Yang, Fengfan; Tang, Lei; Ejaz, Saqib; Luo, Lin; Maharaj, B. T.

2016-03-01

In this paper, we investigate joint design of quasi-cyclic low-density-parity-check (QC-LDPC) codes for coded cooperation system with joint iterative decoding in the destination. First, QC-LDPC codes based on the base matrix and exponent matrix are introduced, and then we describe two types of girth-4 cycles in QC-LDPC codes employed by the source and relay. In the equivalent parity-check matrix corresponding to the jointly designed QC-LDPC codes employed by the source and relay, all girth-4 cycles including both type I and type II are cancelled. Theoretical analysis and numerical simulations show that the jointly designed QC-LDPC coded cooperation well combines cooperation gain and channel coding gain, and outperforms the coded non-cooperation under the same conditions. Furthermore, the bit error rate performance of the coded cooperation employing jointly designed QC-LDPC codes is better than those of random LDPC codes and separately designed QC-LDPC codes over AWGN channels.

Coupling the severe accident code SCDAP with the system thermal hydraulic code MARS

Energy Technology Data Exchange (ETDEWEB)

Lee, Young Jin; Chung, Bub Dong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

2004-07-01

MARS is a best-estimate system thermal hydraulics code with multi-dimensional modeling capability. One of the aims in MARS code development is to make it a multi-functional code system with the analysis capability to cover the entire accident spectrum. For this purpose, MARS code has been coupled with a number of other specialized codes such as CONTEMPT for containment analysis, and MASTER for 3-dimensional kinetics. And in this study, the SCDAP code has been coupled with MARS to endow the MARS code system with severe accident analysis capability. With the SCDAP, MARS code system now has acquired the capability to simulate such severe accident related phenomena as cladding oxidation, melting and slumping of fuel and reactor structures.

Coupling the severe accident code SCDAP with the system thermal hydraulic code MARS

International Nuclear Information System (INIS)

Lee, Young Jin; Chung, Bub Dong

2004-01-01

MARS is a best-estimate system thermal hydraulics code with multi-dimensional modeling capability. One of the aims in MARS code development is to make it a multi-functional code system with the analysis capability to cover the entire accident spectrum. For this purpose, MARS code has been coupled with a number of other specialized codes such as CONTEMPT for containment analysis, and MASTER for 3-dimensional kinetics. And in this study, the SCDAP code has been coupled with MARS to endow the MARS code system with severe accident analysis capability. With the SCDAP, MARS code system now has acquired the capability to simulate such severe accident related phenomena as cladding oxidation, melting and slumping of fuel and reactor structures

Distributed Video Coding for Multiview and Video-plus-depth Coding

DEFF Research Database (Denmark)

Salmistraro, Matteo

The interest in Distributed Video Coding (DVC) systems has grown considerably in the academic world in recent years. With DVC the correlation between frames is exploited at the decoder (joint decoding). The encoder codes the frame independently, performing relatively simple operations. Therefore......, with DVC the complexity is shifted from encoder to decoder, making the coding architecture a viable solution for encoders with limited resources. DVC may empower new applications which can benefit from this reversed coding architecture. Multiview Distributed Video Coding (M-DVC) is the application...... of the to-be-decoded frame. Another key element is the Residual estimation, indicating the reliability of the SI, which is used to calculate the parameters of the correlation noise model between SI and original frame. In this thesis new methods for Inter-camera SI generation are analyzed in the Stereo...

Diagnostic Coding for Epilepsy.

Science.gov (United States)

Williams, Korwyn; Nuwer, Marc R; Buchhalter, Jeffrey R

2016-02-01

Accurate coding is an important function of neurologic practice. This contribution to Continuum is part of an ongoing series that presents helpful coding information along with examples related to the issue topic. Tips for diagnosis coding, Evaluation and Management coding, procedure coding, or a combination are presented, depending on which is most applicable to the subject area of the issue.

Coding of Neuroinfectious Diseases.

Science.gov (United States)

Barkley, Gregory L

2015-12-01

Accurate coding is an important function of neurologic practice. This contribution to Continuum is part of an ongoing series that presents helpful coding information along with examples related to the issue topic. Tips for diagnosis coding, Evaluation and Management coding, procedure coding, or a combination are presented, depending on which is most applicable to the subject area of the issue.

Refactoring test code

NARCIS (Netherlands)

A. van Deursen (Arie); L.M.F. Moonen (Leon); A. van den Bergh; G. Kok

2001-01-01

textabstractTwo key aspects of extreme programming (XP) are unit testing and merciless refactoring. Given the fact that the ideal test code / production code ratio approaches 1:1, it is not surprising that unit tests are being refactored. We found that refactoring test code is different from

Gauge color codes

DEFF Research Database (Denmark)

Bombin Palomo, Hector

2015-01-01

Color codes are topological stabilizer codes with unusual transversality properties. Here I show that their group of transversal gates is optimal and only depends on the spatial dimension, not the local geometry. I also introduce a generalized, subsystem version of color codes. In 3D they allow...

Opening up codings?

DEFF Research Database (Denmark)

Steensig, Jakob; Heinemann, Trine

2015-01-01

doing formal coding and when doing more “traditional” conversation analysis research based on collections. We are more wary, however, of the implication that coding-based research is the end result of a process that starts with qualitative investigations and ends with categories that can be coded...

The materiality of Code

DEFF Research Database (Denmark)

Soon, Winnie

2014-01-01

This essay studies the source code of an artwork from a software studies perspective. By examining code that come close to the approach of critical code studies (Marino, 2006), I trace the network artwork, Pupufu (Lin, 2009) to understand various real-time approaches to social media platforms (MSN......, Twitter and Facebook). The focus is not to investigate the functionalities and efficiencies of the code, but to study and interpret the program level of code in order to trace the use of various technological methods such as third-party libraries and platforms’ interfaces. These are important...... to understand the socio-technical side of a changing network environment. Through the study of code, including but not limited to source code, technical specifications and other materials in relation to the artwork production, I would like to explore the materiality of code that goes beyond technical...

Speech coding

Energy Technology Data Exchange (ETDEWEB)

Ravishankar, C., Hughes Network Systems, Germantown, MD

1998-05-08

Speech is the predominant means of communication between human beings and since the invention of the telephone by Alexander Graham Bell in 1876, speech services have remained to be the core service in almost all telecommunication systems. Original analog methods of telephony had the disadvantage of speech signal getting corrupted by noise, cross-talk and distortion Long haul transmissions which use repeaters to compensate for the loss in signal strength on transmission links also increase the associated noise and distortion. On the other hand digital transmission is relatively immune to noise, cross-talk and distortion primarily because of the capability to faithfully regenerate digital signal at each repeater purely based on a binary decision. Hence end-to-end performance of the digital link essentially becomes independent of the length and operating frequency bands of the link Hence from a transmission point of view digital transmission has been the preferred approach due to its higher immunity to noise. The need to carry digital speech became extremely important from a service provision point of view as well. Modem requirements have introduced the need for robust, flexible and secure services that can carry a multitude of signal types (such as voice, data and video) without a fundamental change in infrastructure. Such a requirement could not have been easily met without the advent of digital transmission systems, thereby requiring speech to be coded digitally. The term Speech Coding is often referred to techniques that represent or code speech signals either directly as a waveform or as a set of parameters by analyzing the speech signal. In either case, the codes are transmitted to the distant end where speech is reconstructed or synthesized using the received set of codes. A more generic term that is applicable to these techniques that is often interchangeably used with speech coding is the term voice coding. This term is more generic in the sense that the

Tri-code inductance control rod position indicator with several multi-coding-bars

International Nuclear Information System (INIS)

Shi Jibin; Jiang Yueyuan; Wang Wenran

2004-01-01

A control rod position indicator named as tri-code inductance control rod position indicator with multi-coding-bars, which possesses simple structure, reliable operation and high precision, is developed. The detector of the indicator is composed of K coils, a compensatory coil and K coding bars. Each coding bar consists of several sections of strong magnetic cores, several sections of weak magnetic cores and several sections of non-magnetic portions. As the control rod is withdrawn, the coding bars move in the center of the coils respectively, while the constant alternating current passes the coils and makes them to create inductance alternating voltage signals. The outputs of the coils are picked and processed, and the tri-codes indicating rod position can be gotten. Moreover, the coding principle of the detector and its related structure are introduced. The analysis shows that the indicator owns more advantage over the coils-coding rod position indicator, so it can meet the demands of the rod position indicating in nuclear heating reactor (NHR). (authors)

Fracture flow code

International Nuclear Information System (INIS)

Dershowitz, W; Herbert, A.; Long, J.

1989-03-01

The hydrology of the SCV site will be modelled utilizing discrete fracture flow models. These models are complex, and can not be fully cerified by comparison to analytical solutions. The best approach for verification of these codes is therefore cross-verification between different codes. This is complicated by the variation in assumptions and solution techniques utilized in different codes. Cross-verification procedures are defined which allow comparison of the codes developed by Harwell Laboratory, Lawrence Berkeley Laboratory, and Golder Associates Inc. Six cross-verification datasets are defined for deterministic and stochastic verification of geometric and flow features of the codes. Additional datasets for verification of transport features will be documented in a future report. (13 figs., 7 tabs., 10 refs.) (authors)

NAGRADATA. Code key. Geology

International Nuclear Information System (INIS)

Mueller, W.H.; Schneider, B.; Staeuble, J.

1984-01-01

This reference manual provides users of the NAGRADATA system with comprehensive keys to the coding/decoding of geological and technical information to be stored in or retreaved from the databank. Emphasis has been placed on input data coding. When data is retreaved the translation into plain language of stored coded information is done automatically by computer. Three keys each, list the complete set of currently defined codes for the NAGRADATA system, namely codes with appropriate definitions, arranged: 1. according to subject matter (thematically) 2. the codes listed alphabetically and 3. the definitions listed alphabetically. Additional explanation is provided for the proper application of the codes and the logic behind the creation of new codes to be used within the NAGRADATA system. NAGRADATA makes use of codes instead of plain language for data storage; this offers the following advantages: speed of data processing, mainly data retrieval, economies of storage memory requirements, the standardisation of terminology. The nature of this thesaurian type 'key to codes' makes it impossible to either establish a final form or to cover the entire spectrum of requirements. Therefore, this first issue of codes to NAGRADATA must be considered to represent the current state of progress of a living system and future editions will be issued in a loose leave ringbook system which can be updated by an organised (updating) service. (author)

RFQ simulation code

International Nuclear Information System (INIS)

Lysenko, W.P.

1984-04-01

We have developed the RFQLIB simulation system to provide a means to systematically generate the new versions of radio-frequency quadrupole (RFQ) linac simulation codes that are required by the constantly changing needs of a research environment. This integrated system simplifies keeping track of the various versions of the simulation code and makes it practical to maintain complete and up-to-date documentation. In this scheme, there is a certain standard version of the simulation code that forms a library upon which new versions are built. To generate a new version of the simulation code, the routines to be modified or added are appended to a standard command file, which contains the commands to compile the new routines and link them to the routines in the library. The library itself is rarely changed. Whenever the library is modified, however, this modification is seen by all versions of the simulation code, which actually exist as different versions of the command file. All code is written according to the rules of structured programming. Modularity is enforced by not using COMMON statements, simplifying the relation of the data flow to a hierarchy diagram. Simulation results are similar to those of the PARMTEQ code, as expected, because of the similar physical model. Different capabilities, such as those for generating beams matched in detail to the structure, are available in the new code for help in testing new ideas in designing RFQ linacs

The Visual Code Navigator : An Interactive Toolset for Source Code Investigation

NARCIS (Netherlands)

Lommerse, Gerard; Nossin, Freek; Voinea, Lucian; Telea, Alexandru

2005-01-01

We present the Visual Code Navigator, a set of three interrelated visual tools that we developed for exploring large source code software projects from three different perspectives, or views: The syntactic view shows the syntactic constructs in the source code. The symbol view shows the objects a

Sistema de medición de la estabilidad de depósitos mineros de relave frente a la acción eólica, para su recuperación como espacio urbano sostenible : el caso de la ciudad de Copiapó en Chile

OpenAIRE

Valenzuela Toro, Pamela

2016-01-01

El incremento de la producción de cobre junto con el crecimiento de las ciudades en Chile ha generado un problema significativo en algunas zonas urbanas, debido a que actualmente se encuentran emplazados depósitos de residuos sólidos generados por las actividades productivas mineras, como el caso del relave generado en el proceso de obtención de cobre por flotación. Estas instalaciones cuando están emplazadas en las ciudades, son potenciales generadoras de impactos a la salud de las personas,...

Joint source-channel coding using variable length codes

NARCIS (Netherlands)

Balakirsky, V.B.

2001-01-01

We address the problem of joint source-channel coding when variable-length codes are used for information transmission over a discrete memoryless channel. Data transmitted over the channel are interpreted as pairs (m k ,t k ), where m k is a message generated by the source and t k is a time instant

Tokamak Systems Code

International Nuclear Information System (INIS)

Reid, R.L.; Barrett, R.J.; Brown, T.G.

1985-03-01

The FEDC Tokamak Systems Code calculates tokamak performance, cost, and configuration as a function of plasma engineering parameters. This version of the code models experimental tokamaks. It does not currently consider tokamak configurations that generate electrical power or incorporate breeding blankets. The code has a modular (or subroutine) structure to allow independent modeling for each major tokamak component or system. A primary benefit of modularization is that a component module may be updated without disturbing the remainder of the systems code as long as the imput to or output from the module remains unchanged

Blahut-Arimoto algorithm and code design for action-dependent source coding problems

DEFF Research Database (Denmark)

Trillingsgaard, Kasper Fløe; Simeone, Osvaldo; Popovski, Petar

2013-01-01

The source coding problem with action-dependent side information at the decoder has recently been introduced to model data acquisition in resource-constrained systems. In this paper, an efficient Blahut-Arimoto-type algorithm for the numerical computation of the rate-distortion-cost function...... for this problem is proposed. Moreover, a simplified two-stage code structure based on multiplexing is put forth, whereby the first stage encodes the actions and the second stage is composed of an array of classical Wyner-Ziv codes, one for each action. Leveraging this structure, specific coding/decoding...... strategies are designed based on LDGM codes and message passing. Through numerical examples, the proposed code design is shown to achieve performance close to the rate-distortion-cost function....

On the Combination of Multi-Layer Source Coding and Network Coding for Wireless Networks

DEFF Research Database (Denmark)

Krigslund, Jeppe; Fitzek, Frank; Pedersen, Morten Videbæk

2013-01-01

quality is developed. A linear coding structure designed to gracefully encapsulate layered source coding provides both low complexity of the utilised linear coding while enabling robust erasure correction in the form of fountain coding capabilities. The proposed linear coding structure advocates efficient...

Coding Class

DEFF Research Database (Denmark)

Ejsing-Duun, Stine; Hansbøl, Mikala

Denne rapport rummer evaluering og dokumentation af Coding Class projektet1. Coding Class projektet blev igangsat i skoleåret 2016/2017 af IT-Branchen i samarbejde med en række medlemsvirksomheder, Københavns kommune, Vejle Kommune, Styrelsen for IT- og Læring (STIL) og den frivillige forening...... Coding Pirates2. Rapporten er forfattet af Docent i digitale læringsressourcer og forskningskoordinator for forsknings- og udviklingsmiljøet Digitalisering i Skolen (DiS), Mikala Hansbøl, fra Institut for Skole og Læring ved Professionshøjskolen Metropol; og Lektor i læringsteknologi, interaktionsdesign......, design tænkning og design-pædagogik, Stine Ejsing-Duun fra Forskningslab: It og Læringsdesign (ILD-LAB) ved Institut for kommunikation og psykologi, Aalborg Universitet i København. Vi har fulgt og gennemført evaluering og dokumentation af Coding Class projektet i perioden november 2016 til maj 2017...

KENO-V code

International Nuclear Information System (INIS)

Cramer, S.N.

1984-01-01

The KENO-V code is the current release of the Oak Ridge multigroup Monte Carlo criticality code development. The original KENO, with 16 group Hansen-Roach cross sections and P 1 scattering, was one ot the first multigroup Monte Carlo codes and it and its successors have always been a much-used research tool for criticality studies. KENO-V is able to accept large neutron cross section libraries (a 218 group set is distributed with the code) and has a general P/sub N/ scattering capability. A supergroup feature allows execution of large problems on small computers, but at the expense of increased calculation time and system input/output operations. This supergroup feature is activated automatically by the code in a manner which utilizes as much computer memory as is available. The primary purpose of KENO-V is to calculate the system k/sub eff/, from small bare critical assemblies to large reflected arrays of differing fissile and moderator elements. In this respect KENO-V neither has nor requires the many options and sophisticated biasing techniques of general Monte Carlo codes

PEAR code review

International Nuclear Information System (INIS)

De Wit, R.; Jamieson, T.; Lord, M.; Lafortune, J.F.

1997-07-01

As a necessary component in the continuous improvement and refinement of methodologies employed in the nuclear industry, regulatory agencies need to periodically evaluate these processes to improve confidence in results and ensure appropriate levels of safety are being achieved. The independent and objective review of industry-standard computer codes forms an essential part of this program. To this end, this work undertakes an in-depth review of the computer code PEAR (Public Exposures from Accidental Releases), developed by Atomic Energy of Canada Limited (AECL) to assess accidental releases from CANDU reactors. PEAR is based largely on the models contained in the Canadian Standards Association (CSA) N288.2-M91. This report presents the results of a detailed technical review of the PEAR code to identify any variations from the CSA standard and other supporting documentation, verify the source code, assess the quality of numerical models and results, and identify general strengths and weaknesses of the code. The version of the code employed in this review is the one which AECL intends to use for CANDU 9 safety analyses. (author)

Manually operated coded switch

International Nuclear Information System (INIS)

Barnette, J.H.

1978-01-01

The disclosure related to a manually operated recodable coded switch in which a code may be inserted, tried and used to actuate a lever controlling an external device. After attempting a code, the switch's code wheels must be returned to their zero positions before another try is made

Phonological coding during reading.

Science.gov (United States)

Leinenger, Mallorie

2014-11-01

The exact role that phonological coding (the recoding of written, orthographic information into a sound based code) plays during silent reading has been extensively studied for more than a century. Despite the large body of research surrounding the topic, varying theories as to the time course and function of this recoding still exist. The present review synthesizes this body of research, addressing the topics of time course and function in tandem. The varying theories surrounding the function of phonological coding (e.g., that phonological codes aid lexical access, that phonological codes aid comprehension and bolster short-term memory, or that phonological codes are largely epiphenomenal in skilled readers) are first outlined, and the time courses that each maps onto (e.g., that phonological codes come online early [prelexical] or that phonological codes come online late [postlexical]) are discussed. Next the research relevant to each of these proposed functions is reviewed, discussing the varying methodologies that have been used to investigate phonological coding (e.g., response time methods, reading while eye-tracking or recording EEG and MEG, concurrent articulation) and highlighting the advantages and limitations of each with respect to the study of phonological coding. In response to the view that phonological coding is largely epiphenomenal in skilled readers, research on the use of phonological codes in prelingually, profoundly deaf readers is reviewed. Finally, implications for current models of word identification (activation-verification model, Van Orden, 1987; dual-route model, e.g., M. Coltheart, Rastle, Perry, Langdon, & Ziegler, 2001; parallel distributed processing model, Seidenberg & McClelland, 1989) are discussed. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

Codes maintained by the LAACG [Los Alamos Accelerator Code Group] at the NMFECC

International Nuclear Information System (INIS)

Wallace, R.; Barts, T.

1990-01-01

The Los Alamos Accelerator Code Group (LAACG) maintains two groups of design codes at the National Magnetic Fusion Energy Computing Center (NMFECC). These codes, principally electromagnetic field solvers, are used for the analysis and design of electromagnetic components for accelerators, e.g., magnets, rf structures, pickups, etc. In this paper, the status and future of the installed codes will be discussed with emphasis on an experimental version of one set of codes, POISSON/SUPERFISH

Concatenated coding systems employing a unit-memory convolutional code and a byte-oriented decoding algorithm

Science.gov (United States)

Lee, L.-N.

1977-01-01

Concatenated coding systems utilizing a convolutional code as the inner code and a Reed-Solomon code as the outer code are considered. In order to obtain very reliable communications over a very noisy channel with relatively modest coding complexity, it is proposed to concatenate a byte-oriented unit-memory convolutional code with an RS outer code whose symbol size is one byte. It is further proposed to utilize a real-time minimal-byte-error probability decoding algorithm, together with feedback from the outer decoder, in the decoder for the inner convolutional code. The performance of the proposed concatenated coding system is studied, and the improvement over conventional concatenated systems due to each additional feature is isolated.

Benchmark studies of BOUT++ code and TPSMBI code on neutral transport during SMBI

Energy Technology Data Exchange (ETDEWEB)

Wang, Y.H. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); University of Science and Technology of China, Hefei 230026 (China); Center for Magnetic Fusion Theory, Chinese Academy of Sciences, Hefei 230031 (China); Wang, Z.H., E-mail: zhwang@swip.ac.cn [Southwestern Institute of Physics, Chengdu 610041 (China); Guo, W., E-mail: wfguo@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Center for Magnetic Fusion Theory, Chinese Academy of Sciences, Hefei 230031 (China); Ren, Q.L. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Sun, A.P.; Xu, M.; Wang, A.K. [Southwestern Institute of Physics, Chengdu 610041 (China); Xiang, N. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Center for Magnetic Fusion Theory, Chinese Academy of Sciences, Hefei 230031 (China)

2017-06-09

SMBI (supersonic molecule beam injection) plays an important role in tokamak plasma fuelling, density control and ELM mitigation in magnetic confinement plasma physics, which has been widely used in many tokamaks. The trans-neut module of BOUT++ code is the only large-scale parallel 3D fluid code used to simulate the SMBI fueling process, while the TPSMBI (transport of supersonic molecule beam injection) code is a recent developed 1D fluid code of SMBI. In order to find a method to increase SMBI fueling efficiency in H-mode plasma, especially for ITER, it is significant to first verify the codes. The benchmark study between the trans-neut module of BOUT++ code and the TPSMBI code on radial transport dynamics of neutral during SMBI has been first successfully achieved in both slab and cylindrical coordinates. The simulation results from the trans-neut module of BOUT++ code and TPSMBI code are consistent very well with each other. Different upwind schemes have been compared to deal with the sharp gradient front region during the inward propagation of SMBI for the code stability. The influence of the WENO3 (weighted essentially non-oscillatory) and the third order upwind schemes on the benchmark results has also been discussed. - Highlights: • A 1D model of SMBI has developed. • Benchmarks of BOUT++ and TPSMBI codes have first been finished. • The influence of the WENO3 and the third order upwind schemes on the benchmark results has also been discussed.

Algebraic and stochastic coding theory

CERN Document Server

Kythe, Dave K

2012-01-01

Using a simple yet rigorous approach, Algebraic and Stochastic Coding Theory makes the subject of coding theory easy to understand for readers with a thorough knowledge of digital arithmetic, Boolean and modern algebra, and probability theory. It explains the underlying principles of coding theory and offers a clear, detailed description of each code. More advanced readers will appreciate its coverage of recent developments in coding theory and stochastic processes. After a brief review of coding history and Boolean algebra, the book introduces linear codes, including Hamming and Golay codes.

Optical coding theory with Prime

CERN Document Server

Kwong, Wing C

2013-01-01

Although several books cover the coding theory of wireless communications and the hardware technologies and coding techniques of optical CDMA, no book has been specifically dedicated to optical coding theory-until now. Written by renowned authorities in the field, Optical Coding Theory with Prime gathers together in one volume the fundamentals and developments of optical coding theory, with a focus on families of prime codes, supplemented with several families of non-prime codes. The book also explores potential applications to coding-based optical systems and networks. Learn How to Construct

Identification of coding and non-coding mutational hotspots in cancer genomes.

Science.gov (United States)

Piraino, Scott W; Furney, Simon J

2017-01-05

The identification of mutations that play a causal role in tumour development, so called "driver" mutations, is of critical importance for understanding how cancers form and how they might be treated. Several large cancer sequencing projects have identified genes that are recurrently mutated in cancer patients, suggesting a role in tumourigenesis. While the landscape of coding drivers has been extensively studied and many of the most prominent driver genes are well characterised, comparatively less is known about the role of mutations in the non-coding regions of the genome in cancer development. The continuing fall in genome sequencing costs has resulted in a concomitant increase in the number of cancer whole genome sequences being produced, facilitating systematic interrogation of both the coding and non-coding regions of cancer genomes. To examine the mutational landscapes of tumour genomes we have developed a novel method to identify mutational hotspots in tumour genomes using both mutational data and information on evolutionary conservation. We have applied our methodology to over 1300 whole cancer genomes and show that it identifies prominent coding and non-coding regions that are known or highly suspected to play a role in cancer. Importantly, we applied our method to the entire genome, rather than relying on predefined annotations (e.g. promoter regions) and we highlight recurrently mutated regions that may have resulted from increased exposure to mutational processes rather than selection, some of which have been identified previously as targets of selection. Finally, we implicate several pan-cancer and cancer-specific candidate non-coding regions, which could be involved in tumourigenesis. We have developed a framework to identify mutational hotspots in cancer genomes, which is applicable to the entire genome. This framework identifies known and novel coding and non-coding mutional hotspots and can be used to differentiate candidate driver regions from

On the Performance of a Multi-Edge Type LDPC Code for Coded Modulation

NARCIS (Netherlands)

Cronie, H.S.

2005-01-01

We present a method to combine error-correction coding and spectral-efficient modulation for transmission over the Additive White Gaussian Noise (AWGN) channel. The code employs signal shaping which can provide a so-called shaping gain. The code belongs to the family of sparse graph codes for which

Insurance billing and coding.

Science.gov (United States)

Napier, Rebecca H; Bruelheide, Lori S; Demann, Eric T K; Haug, Richard H

2008-07-01

The purpose of this article is to highlight the importance of understanding various numeric and alpha-numeric codes for accurately billing dental and medically related services to private pay or third-party insurance carriers. In the United States, common dental terminology (CDT) codes are most commonly used by dentists to submit claims, whereas current procedural terminology (CPT) and International Classification of Diseases, Ninth Revision, Clinical Modification (ICD.9.CM) codes are more commonly used by physicians to bill for their services. The CPT and ICD.9.CM coding systems complement each other in that CPT codes provide the procedure and service information and ICD.9.CM codes provide the reason or rationale for a particular procedure or service. These codes are more commonly used for "medical necessity" determinations, and general dentists and specialists who routinely perform care, including trauma-related care, biopsies, and dental treatment as a result of or in anticipation of a cancer-related treatment, are likely to use these codes. Claim submissions for care provided can be completed electronically or by means of paper forms.

Speaking Code

DEFF Research Database (Denmark)

Cox, Geoff

Speaking Code begins by invoking the “Hello World” convention used by programmers when learning a new language, helping to establish the interplay of text and code that runs through the book. Interweaving the voice of critical writing from the humanities with the tradition of computing and software...

Locally orderless registration code

DEFF Research Database (Denmark)

2012-01-01

This is code for the TPAMI paper "Locally Orderless Registration". The code requires intel threadding building blocks installed and is provided for 64 bit on mac, linux and windows.......This is code for the TPAMI paper "Locally Orderless Registration". The code requires intel threadding building blocks installed and is provided for 64 bit on mac, linux and windows....

Decoding Codes on Graphs

Indian Academy of Sciences (India)

Shannon limit of the channel. Among the earliest discovered codes that approach the. Shannon limit were the low density parity check (LDPC) codes. The term low density arises from the property of the parity check matrix defining the code. We will now define this matrix and the role that it plays in decoding. 2. Linear Codes.

Sub-Transport Layer Coding

DEFF Research Database (Denmark)

Hansen, Jonas; Krigslund, Jeppe; Roetter, Daniel Enrique Lucani

2014-01-01

Packet losses in wireless networks dramatically curbs the performance of TCP. This paper introduces a simple coding shim that aids IP-layer traffic in lossy environments while being transparent to transport layer protocols. The proposed coding approach enables erasure correction while being...... oblivious to the congestion control algorithms of the utilised transport layer protocol. Although our coding shim is indifferent towards the transport layer protocol, we focus on the performance of TCP when ran on top of our proposed coding mechanism due to its widespread use. The coding shim provides gains...

Utility experience in code updating of equipment built to 1974 code, Section 3, Subsection NF

International Nuclear Information System (INIS)

Rao, K.R.; Deshpande, N.

1990-01-01

This paper addresses changes to ASME Code Subsection NF and reconciles the differences between the updated codes and the as built construction code, of ASME Section III, 1974 to which several nuclear plants have been built. Since Section III is revised every three years and replacement parts complying with the construction code are invariably not available from the plant stock inventory, parts must be procured from vendors who comply with the requirements of the latest codes. Aspects of the ASME code which reflect Subsection NF are identified and compared with the later Code editions and addenda, especially up to and including the 1974 ASME code used as the basis for the plant qualification. The concern of the regulatory agencies is that if later code allowables and provisions are adopted it is possible to reduce the safety margins of the construction code. Areas of concern are highlighted and the specific changes of later codes are discerned; adoption of which, would not sacrifice the intended safety margins of the codes to which plants are licensed

Theory of epigenetic coding.

Science.gov (United States)

Elder, D

1984-06-07

The logic of genetic control of development may be based on a binary epigenetic code. This paper revises the author's previous scheme dealing with the numerology of annelid metamerism in these terms. Certain features of the code had been deduced to be combinatorial, others not. This paradoxical contrast is resolved here by the interpretation that these features relate to different operations of the code; the combinatiorial to coding identity of units, the non-combinatorial to coding production of units. Consideration of a second paradox in the theory of epigenetic coding leads to a new solution which further provides a basis for epimorphic regeneration, and may in particular throw light on the "regeneration-duplication" phenomenon. A possible test of the model is also put forward.

ETR/ITER systems code

Energy Technology Data Exchange (ETDEWEB)

Barr, W.L.; Bathke, C.G.; Brooks, J.N.; Bulmer, R.H.; Busigin, A.; DuBois, P.F.; Fenstermacher, M.E.; Fink, J.; Finn, P.A.; Galambos, J.D.; Gohar, Y.; Gorker, G.E.; Haines, J.R.; Hassanein, A.M.; Hicks, D.R.; Ho, S.K.; Kalsi, S.S.; Kalyanam, K.M.; Kerns, J.A.; Lee, J.D.; Miller, J.R.; Miller, R.L.; Myall, J.O.; Peng, Y-K.M.; Perkins, L.J.; Spampinato, P.T.; Strickler, D.J.; Thomson, S.L.; Wagner, C.E.; Willms, R.S.; Reid, R.L. (ed.)

1988-04-01

A tokamak systems code capable of modeling experimental test reactors has been developed and is described in this document. The code, named TETRA (for Tokamak Engineering Test Reactor Analysis), consists of a series of modules, each describing a tokamak system or component, controlled by an optimizer/driver. This code development was a national effort in that the modules were contributed by members of the fusion community and integrated into a code by the Fusion Engineering Design Center. The code has been checked out on the Cray computers at the National Magnetic Fusion Energy Computing Center and has satisfactorily simulated the Tokamak Ignition/Burn Experimental Reactor II (TIBER) design. A feature of this code is the ability to perform optimization studies through the use of a numerical software package, which iterates prescribed variables to satisfy a set of prescribed equations or constraints. This code will be used to perform sensitivity studies for the proposed International Thermonuclear Experimental Reactor (ITER). 22 figs., 29 tabs.

ETR/ITER systems code

International Nuclear Information System (INIS)

Barr, W.L.; Bathke, C.G.; Brooks, J.N.

1988-04-01

A tokamak systems code capable of modeling experimental test reactors has been developed and is described in this document. The code, named TETRA (for Tokamak Engineering Test Reactor Analysis), consists of a series of modules, each describing a tokamak system or component, controlled by an optimizer/driver. This code development was a national effort in that the modules were contributed by members of the fusion community and integrated into a code by the Fusion Engineering Design Center. The code has been checked out on the Cray computers at the National Magnetic Fusion Energy Computing Center and has satisfactorily simulated the Tokamak Ignition/Burn Experimental Reactor II (TIBER) design. A feature of this code is the ability to perform optimization studies through the use of a numerical software package, which iterates prescribed variables to satisfy a set of prescribed equations or constraints. This code will be used to perform sensitivity studies for the proposed International Thermonuclear Experimental Reactor (ITER). 22 figs., 29 tabs

Coding and decoding for code division multiple user communication systems

Science.gov (United States)

Healy, T. J.

1985-01-01

A new algorithm is introduced which decodes code division multiple user communication signals. The algorithm makes use of the distinctive form or pattern of each signal to separate it from the composite signal created by the multiple users. Although the algorithm is presented in terms of frequency-hopped signals, the actual transmitter modulator can use any of the existing digital modulation techniques. The algorithm is applicable to error-free codes or to codes where controlled interference is permitted. It can be used when block synchronization is assumed, and in some cases when it is not. The paper also discusses briefly some of the codes which can be used in connection with the algorithm, and relates the algorithm to past studies which use other approaches to the same problem.

Hermitian self-dual quasi-abelian codes

Directory of Open Access Journals (Sweden)

Herbert S. Palines

2017-12-01

Full Text Available Quasi-abelian codes constitute an important class of linear codes containing theoretically and practically interesting codes such as quasi-cyclic codes, abelian codes, and cyclic codes. In particular, the sub-class consisting of 1-generator quasi-abelian codes contains large families of good codes. Based on the well-known decomposition of quasi-abelian codes, the characterization and enumeration of Hermitian self-dual quasi-abelian codes are given. In the case of 1-generator quasi-abelian codes, we offer necessary and sufficient conditions for such codes to be Hermitian self-dual and give a formula for the number of these codes. In the case where the underlying groups are some $p$-groups, the actual number of resulting Hermitian self-dual quasi-abelian codes are determined.

Hominoid-specific de novo protein-coding genes originating from long non-coding RNAs.

Directory of Open Access Journals (Sweden)

Chen Xie

2012-09-01

Full Text Available Tinkering with pre-existing genes has long been known as a major way to create new genes. Recently, however, motherless protein-coding genes have been found to have emerged de novo from ancestral non-coding DNAs. How these genes originated is not well addressed to date. Here we identified 24 hominoid-specific de novo protein-coding genes with precise origination timing in vertebrate phylogeny. Strand-specific RNA-Seq analyses were performed in five rhesus macaque tissues (liver, prefrontal cortex, skeletal muscle, adipose, and testis, which were then integrated with public transcriptome data from human, chimpanzee, and rhesus macaque. On the basis of comparing the RNA expression profiles in the three species, we found that most of the hominoid-specific de novo protein-coding genes encoded polyadenylated non-coding RNAs in rhesus macaque or chimpanzee with a similar transcript structure and correlated tissue expression profile. According to the rule of parsimony, the majority of these hominoid-specific de novo protein-coding genes appear to have acquired a regulated transcript structure and expression profile before acquiring coding potential. Interestingly, although the expression profile was largely correlated, the coding genes in human often showed higher transcriptional abundance than their non-coding counterparts in rhesus macaque. The major findings we report in this manuscript are robust and insensitive to the parameters used in the identification and analysis of de novo genes. Our results suggest that at least a portion of long non-coding RNAs, especially those with active and regulated transcription, may serve as a birth pool for protein-coding genes, which are then further optimized at the transcriptional level.

An algebraic approach to graph codes

DEFF Research Database (Denmark)

Pinero, Fernando

This thesis consists of six chapters. The first chapter, contains a short introduction to coding theory in which we explain the coding theory concepts we use. In the second chapter, we present the required theory for evaluation codes and also give an example of some fundamental codes in coding...... theory as evaluation codes. Chapter three consists of the introduction to graph based codes, such as Tanner codes and graph codes. In Chapter four, we compute the dimension of some graph based codes with a result combining graph based codes and subfield subcodes. Moreover, some codes in chapter four...

Some new ternary linear codes

Directory of Open Access Journals (Sweden)

Rumen Daskalov

2017-07-01

Full Text Available Let an $[n,k,d]_q$ code be a linear code of length $n$, dimension $k$ and minimum Hamming distance $d$ over $GF(q$. One of the most important problems in coding theory is to construct codes with optimal minimum distances. In this paper 22 new ternary linear codes are presented. Two of them are optimal. All new codes improve the respective lower bounds in [11].

CITOPP, CITMOD, CITWI, Processing codes for CITATION Code

International Nuclear Information System (INIS)

Albarhoum, M.

2008-01-01

Description of program or function: CITOPP processes the output file of the CITATION 3-D diffusion code. The program can plot axial, radial and circumferential flux distributions (in cylindrical geometry) in addition to the multiplication factor convergence. The flux distributions can be drawn for each group specified by the program and visualized on the screen. CITMOD processes both the output and the input files of the CITATION 3-D diffusion code. CITMOD can visualize both axial, and radial-angular models of the reactor described by CITATION input/output files. CITWI processes the input file (CIT.INP) of CITATION 3-D diffusion code. CIT.INP is processed to deduce the dimensions of the cell whose cross sections can be representative of the homonym reactor component in section 008 of CIT.INP

Coding for Electronic Mail

Science.gov (United States)

Rice, R. F.; Lee, J. J.

1986-01-01

Scheme for coding facsimile messages promises to reduce data transmission requirements to one-tenth current level. Coding scheme paves way for true electronic mail in which handwritten, typed, or printed messages or diagrams sent virtually instantaneously - between buildings or between continents. Scheme, called Universal System for Efficient Electronic Mail (USEEM), uses unsupervised character recognition and adaptive noiseless coding of text. Image quality of resulting delivered messages improved over messages transmitted by conventional coding. Coding scheme compatible with direct-entry electronic mail as well as facsimile reproduction. Text transmitted in this scheme automatically translated to word-processor form.

Channel coding techniques for wireless communications

CERN Document Server

Deergha Rao, K

2015-01-01

The book discusses modern channel coding techniques for wireless communications such as turbo codes, low-density parity check (LDPC) codes, space–time (ST) coding, RS (or Reed–Solomon) codes and convolutional codes. Many illustrative examples are included in each chapter for easy understanding of the coding techniques. The text is integrated with MATLAB-based programs to enhance the understanding of the subject’s underlying theories. It includes current topics of increasing importance such as turbo codes, LDPC codes, Luby transform (LT) codes, Raptor codes, and ST coding in detail, in addition to the traditional codes such as cyclic codes, BCH (or Bose–Chaudhuri–Hocquenghem) and RS codes and convolutional codes. Multiple-input and multiple-output (MIMO) communications is a multiple antenna technology, which is an effective method for high-speed or high-reliability wireless communications. PC-based MATLAB m-files for the illustrative examples are provided on the book page on Springer.com for free dow...

Reactor lattice codes

International Nuclear Information System (INIS)

Kulikowska, T.

2001-01-01

The description of reactor lattice codes is carried out on the example of the WIMSD-5B code. The WIMS code in its various version is the most recognised lattice code. It is used in all parts of the world for calculations of research and power reactors. The version WIMSD-5B is distributed free of charge by NEA Data Bank. The description of its main features given in the present lecture follows the aspects defined previously for lattice calculations in the lecture on Reactor Lattice Transport Calculations. The spatial models are described, and the approach to the energy treatment is given. Finally the specific algorithm applied in fuel depletion calculations is outlined. (author)

Exploring the concept of QR Code and the benefits of using QR Code for companies

OpenAIRE

Ji, Qianyu

2014-01-01

This research work concentrates on the concept of QR Code and the benefits of using QR Code for companies. The first objective of this research work is to study the general information of QR Code in order to guide people to understand the QR Code in detail. The second objective of this research work is to explore and analyze the essential and feasible technologies of QR Code for the sake of clearing the technologies of QR code. Additionally, this research work through QR Code best practices t...

Coding training for medical students: How good is diagnoses coding with ICD-10 by novices?

Directory of Open Access Journals (Sweden)

Stausberg, Jürgen

2005-04-01

Full Text Available Teaching of knowledge and competence in documentation and coding is an essential part of medical education. Therefore, coding training had been placed within the course of epidemiology, medical biometry, and medical informatics. From this, we can draw conclusions about the quality of coding by novices. One hundred and eighteen students coded diagnoses from 15 nephrological cases in homework. In addition to interrater reliability, validity was calculated by comparison with a reference coding. On the level of terminal codes, 59.3% of the students' results were correct. The completeness was calculated as 58.0%. The results on the chapter level increased up to 91.5% and 87.7% respectively. For the calculation of reliability a new, simple measure was developed that leads to values of 0.46 on the level of terminal codes and 0.87 on the chapter level for interrater reliability. The figures of concordance with the reference coding are quite similar. In contrary, routine data show considerably lower results with 0.34 and 0.63 respectively. Interrater reliability and validity of coding by novices is as good as coding by experts. The missing advantage of experts could be explained by the workload of documentation and a negative attitude to coding on the one hand. On the other hand, coding in a DRG-system is handicapped by a large number of detailed coding rules, which do not end in uniform results but rather lead to wrong and random codes. Anyway, students left the course well prepared for coding.

Turbo coding, turbo equalisation and space-time coding for transmission over fading channels

CERN Document Server

Hanzo, L; Yeap, B

2002-01-01

Against the backdrop of the emerging 3G wireless personal communications standards and broadband access network standard proposals, this volume covers a range of coding and transmission aspects for transmission over fading wireless channels. It presents the most important classic channel coding issues and also the exciting advances of the last decade, such as turbo coding, turbo equalisation and space-time coding. It endeavours to be the first book with explicit emphasis on channel coding for transmission over wireless channels. Divided into 4 parts: Part 1 - explains the necessary background for novices. It aims to be both an easy reading text book and a deep research monograph. Part 2 - provides detailed coverage of turbo conventional and turbo block coding considering the known decoding algorithms and their performance over Gaussian as well as narrowband and wideband fading channels. Part 3 - comprehensively discusses both space-time block and space-time trellis coding for the first time in literature. Par...

Decoding Xing-Ling codes

DEFF Research Database (Denmark)

Nielsen, Rasmus Refslund

2002-01-01

This paper describes an efficient decoding method for a recent construction of good linear codes as well as an extension to the construction. Furthermore, asymptotic properties and list decoding of the codes are discussed.......This paper describes an efficient decoding method for a recent construction of good linear codes as well as an extension to the construction. Furthermore, asymptotic properties and list decoding of the codes are discussed....

75 FR 19944 - International Code Council: The Update Process for the International Codes and Standards

Science.gov (United States)

2010-04-16

... documents from ICC's Chicago District Office: International Code Council, 4051 W Flossmoor Road, Country... Energy Conservation Code. International Existing Building Code. International Fire Code. International...

Code portability and data management considerations in the SAS3D LMFBR accident-analysis code

International Nuclear Information System (INIS)

Dunn, F.E.

1981-01-01

The SAS3D code was produced from a predecessor in order to reduce or eliminate interrelated problems in the areas of code portability, the large size of the code, inflexibility in the use of memory and the size of cases that can be run, code maintenance, and running speed. Many conventional solutions, such as variable dimensioning, disk storage, virtual memory, and existing code-maintenance utilities were not feasible or did not help in this case. A new data management scheme was developed, coding standards and procedures were adopted, special machine-dependent routines were written, and a portable source code processing code was written. The resulting code is quite portable, quite flexible in the use of memory and the size of cases that can be run, much easier to maintain, and faster running. SAS3D is still a large, long running code that only runs well if sufficient main memory is available

Error-correction coding for digital communications

Science.gov (United States)

Clark, G. C., Jr.; Cain, J. B.

This book is written for the design engineer who must build the coding and decoding equipment and for the communication system engineer who must incorporate this equipment into a system. It is also suitable as a senior-level or first-year graduate text for an introductory one-semester course in coding theory. Fundamental concepts of coding are discussed along with group codes, taking into account basic principles, practical constraints, performance computations, coding bounds, generalized parity check codes, polynomial codes, and important classes of group codes. Other topics explored are related to simple nonalgebraic decoding techniques for group codes, soft decision decoding of block codes, algebraic techniques for multiple error correction, the convolutional code structure and Viterbi decoding, syndrome decoding techniques, and sequential decoding techniques. System applications are also considered, giving attention to concatenated codes, coding for the white Gaussian noise channel, interleaver structures for coded systems, and coding for burst noise channels.

Code Team Training: Demonstrating Adherence to AHA Guidelines During Pediatric Code Blue Activations.

Science.gov (United States)

Stewart, Claire; Shoemaker, Jamie; Keller-Smith, Rachel; Edmunds, Katherine; Davis, Andrew; Tegtmeyer, Ken

2017-10-16

Pediatric code blue activations are infrequent events with a high mortality rate despite the best effort of code teams. The best method for training these code teams is debatable; however, it is clear that training is needed to assure adherence to American Heart Association (AHA) Resuscitation Guidelines and to prevent the decay that invariably occurs after Pediatric Advanced Life Support training. The objectives of this project were to train a multidisciplinary, multidepartmental code team and to measure this team's adherence to AHA guidelines during code simulation. Multidisciplinary code team training sessions were held using high-fidelity, in situ simulation. Sessions were held several times per month. Each session was filmed and reviewed for adherence to 5 AHA guidelines: chest compression rate, ventilation rate, chest compression fraction, use of a backboard, and use of a team leader. After the first study period, modifications were made to the code team including implementation of just-in-time training and alteration of the compression team. Thirty-eight sessions were completed, with 31 eligible for video analysis. During the first study period, 1 session adhered to all AHA guidelines. During the second study period, after alteration of the code team and implementation of just-in-time training, no sessions adhered to all AHA guidelines; however, there was an improvement in percentage of sessions adhering to ventilation rate and chest compression rate and an improvement in median ventilation rate. We present a method for training a large code team drawn from multiple hospital departments and a method of assessing code team performance. Despite subjective improvement in code team positioning, communication, and role completion and some improvement in ventilation rate and chest compression rate, we failed to consistently demonstrate improvement in adherence to all guidelines.

MARS code manual volume I: code structure, system models, and solution methods

International Nuclear Information System (INIS)

Chung, Bub Dong; Kim, Kyung Doo; Bae, Sung Won; Jeong, Jae Jun; Lee, Seung Wook; Hwang, Moon Kyu; Yoon, Churl

2010-02-01

Korea Advanced Energy Research Institute (KAERI) conceived and started the development of MARS code with the main objective of producing a state-of-the-art realistic thermal hydraulic systems analysis code with multi-dimensional analysis capability. MARS achieves this objective by very tightly integrating the one dimensional RELAP5/MOD3 with the multi-dimensional COBRA-TF codes. The method of integration of the two codes is based on the dynamic link library techniques, and the system pressure equation matrices of both codes are implicitly integrated and solved simultaneously. In addition, the Equation-Of-State (EOS) for the light water was unified by replacing the EOS of COBRA-TF by that of the RELAP5. This theory manual provides a complete list of overall information of code structure and major function of MARS including code architecture, hydrodynamic model, heat structure, trip / control system and point reactor kinetics model. Therefore, this report would be very useful for the code users. The overall structure of the manual is modeled on the structure of the RELAP5 and as such the layout of the manual is very similar to that of the RELAP. This similitude to RELAP5 input is intentional as this input scheme will allow minimum modification between the inputs of RELAP5 and MARS3.1. MARS3.1 development team would like to express its appreciation to the RELAP5 Development Team and the USNRC for making this manual possible

Deciphering the genetic regulatory code using an inverse error control coding framework.

Energy Technology Data Exchange (ETDEWEB)

Rintoul, Mark Daniel; May, Elebeoba Eni; Brown, William Michael; Johnston, Anna Marie; Watson, Jean-Paul

2005-03-01

We have found that developing a computational framework for reconstructing error control codes for engineered data and ultimately for deciphering genetic regulatory coding sequences is a challenging and uncharted area that will require advances in computational technology for exact solutions. Although exact solutions are desired, computational approaches that yield plausible solutions would be considered sufficient as a proof of concept to the feasibility of reverse engineering error control codes and the possibility of developing a quantitative model for understanding and engineering genetic regulation. Such evidence would help move the idea of reconstructing error control codes for engineered and biological systems from the high risk high payoff realm into the highly probable high payoff domain. Additionally this work will impact biological sensor development and the ability to model and ultimately develop defense mechanisms against bioagents that can be engineered to cause catastrophic damage. Understanding how biological organisms are able to communicate their genetic message efficiently in the presence of noise can improve our current communication protocols, a continuing research interest. Towards this end, project goals include: (1) Develop parameter estimation methods for n for block codes and for n, k, and m for convolutional codes. Use methods to determine error control (EC) code parameters for gene regulatory sequence. (2) Develop an evolutionary computing computational framework for near-optimal solutions to the algebraic code reconstruction problem. Method will be tested on engineered and biological sequences.

Nuclear code abstracts (1975 edition)

International Nuclear Information System (INIS)

Akanuma, Makoto; Hirakawa, Takashi

1976-02-01

Nuclear Code Abstracts is compiled in the Nuclear Code Committee to exchange information of the nuclear code developments among members of the committee. Enlarging the collection, the present one includes nuclear code abstracts obtained in 1975 through liaison officers of the organizations in Japan participating in the Nuclear Energy Agency's Computer Program Library at Ispra, Italy. The classification of nuclear codes and the format of code abstracts are the same as those in the library. (auth.)

Estudio del comportamiento de los recargues multicapas de depósitos soldados de fundición blanca al cromo

Directory of Open Access Journals (Sweden)

R. Collazo-Carceller

2009-05-01

Full Text Available Se determina la influencia de los parámetros Energía introducida (Hi, Número de capas (Nc y Ancho del depósito (Ad, en la morfología y el incremento de la resistencia al desgaste abrasivo de capas depositadas sobre acero 1020 utilizando el electrodo de fundición blanca al cromo UTP Ledurit – 61. Empleando la microscopia óptica se identificaron y cuantificaron las fases presentes, analizando su efecto en el desgaste. Siendo determinante la influencia de la inclinación de las dendritas y su posición con respecto a 90° en el incremento de la resistencia al desgaste abrasivo. Se caracterizaron los posibles mecanismos de daño superficial provocado por desgaste abrasivo empleando la microscopia electrónica de barrido. Se propusieron modelos lineales para correlacionar la influencia de la cantidad, tamaño, dispersión de los carburos y el ángulo de inclinación de las dendritas, en el incremento de la resistencia al desgaste.The influence of different parameters in layer morphology and abrasion resistance of Fe-Cr-C electrodes UTP Ledurit – 61 on steel 1020 was studied. Introduced Energy (Hi, Number of Layers (Nc, and Deposit Width (Ad were the main parameters considered. The metallographic identification and quantification of metal phases and the determination of their effect in abrasion resistance were made with optical microscopy. The abrasive wear test characterized by scanning electron microscopy, defines a possible mechanism of surface damage. It was found that the angle formed between a normal line to the surface and the dendrite inclination is directly related with the increment of wear resistance. Lineal models that correlate wear resistance with quantity, size, and carbide dispersion and dendrite angle inclination were also developed.

Geochemical computer codes. A review

International Nuclear Information System (INIS)

Andersson, K.

1987-01-01

In this report a review of available codes is performed and some code intercomparisons are also discussed. The number of codes treating natural waters (groundwater, lake water, sea water) is large. Most geochemical computer codes treat equilibrium conditions, although some codes with kinetic capability are available. A geochemical equilibrium model consists of a computer code, solving a set of equations by some numerical method and a data base, consisting of thermodynamic data required for the calculations. There are some codes which treat coupled geochemical and transport modeling. Some of these codes solve the equilibrium and transport equations simultaneously while other solve the equations separately from each other. The coupled codes require a large computer capacity and have thus as yet limited use. Three code intercomparisons have been found in literature. It may be concluded that there are many codes available for geochemical calculations but most of them require a user that us quite familiar with the code. The user also has to know the geochemical system in order to judge the reliability of the results. A high quality data base is necessary to obtain a reliable result. The best results may be expected for the major species of natural waters. For more complicated problems, including trace elements, precipitation/dissolution, adsorption, etc., the results seem to be less reliable. (With 44 refs.) (author)

Bandwidth efficient coding

CERN Document Server

Anderson, John B

2017-01-01

Bandwidth Efficient Coding addresses the major challenge in communication engineering today: how to communicate more bits of information in the same radio spectrum. Energy and bandwidth are needed to transmit bits, and bandwidth affects capacity the most. Methods have been developed that are ten times as energy efficient at a given bandwidth consumption as simple methods. These employ signals with very complex patterns and are called "coding" solutions. The book begins with classical theory before introducing new techniques that combine older methods of error correction coding and radio transmission in order to create narrowband methods that are as efficient in both spectrum and energy as nature allows. Other topics covered include modulation techniques such as CPM, coded QAM and pulse design.

Coding for urologic office procedures.

Science.gov (United States)

Dowling, Robert A; Painter, Mark

2013-11-01

This article summarizes current best practices for documenting, coding, and billing common office-based urologic procedures. Topics covered include general principles, basic and advanced urologic coding, creation of medical records that support compliant coding practices, bundled codes and unbundling, global periods, modifiers for procedure codes, when to bill for evaluation and management services during the same visit, coding for supplies, and laboratory and radiology procedures pertinent to urology practice. Detailed information is included for the most common urology office procedures, and suggested resources and references are provided. This information is of value to physicians, office managers, and their coding staff. Copyright © 2013 Elsevier Inc. All rights reserved.

Heme oxygenase-1 protects endothelial cells from the toxicity of air pollutant chemicals

International Nuclear Information System (INIS)

Lawal, Akeem O.; Zhang, Min; Dittmar, Michael; Lulla, Aaron; Araujo, Jesus A.

2015-01-01

Diesel exhaust particles (DEPs) are a major component of diesel emissions, responsible for a large portion of their toxicity. In this study, we examined the toxic effects of DEPs on endothelial cells and the role of DEP-induced heme oxygenase-1 (HO-1) expression. Human microvascular endothelial cells (HMECs) were treated with an organic extract of DEPs from an automobile engine (A-DEP) or a forklift engine (F-DEP) for 1 and 4 h. ROS generation, cell viability, lactate dehydrogenase leakage, expression of HO-1, inflammatory genes, cell adhesion molecules and unfolded protein respone (UPR) gene were assessed. HO-1 expression and/or activity were inhibited by siRNA or tin protoporphyrin (Sn PPIX) and enhanced by an expression plasmid or cobalt protoporphyrin (CoPPIX). Exposure to 25 μg/ml of A-DEP and F-DEP significantly induced ROS production, cellular toxicity and greater levels of inflammatory and cellular adhesion molecules but to a different degree. Inhibition of HO-1 enzymatic activity with SnPPIX and silencing of the HO-1 gene by siRNA enhanced DEP-induced ROS production, further decreased cell viability and increased expression of inflammatory and cell adhesion molecules. On the other hand, overexpression of the HO-1 gene by a pcDNA 3.1D/V5-HO-1 plasmid significantly mitigated ROS production, increased cell survival and decreased the expression of inflammatory genes. HO-1 expression protected HMECs from DEP-induced prooxidative and proinflammatory effects. Modulation of HO-1 expression could potentially serve as a therapeutic target in an attempt to inhibit the cardiovascular effects of ambient PM. - Highlights: • We examined the role of HO-1 expression on diesel exhaust particle (DEP) in endothelial cells. • DEPs exert cytotoxic and inflammatory effects on human microvascular endothelial cells (HMECs). • DEPs induce HO-1 expression in HMECs. • HO-1 protects against the oxidative stress induced by DEps. • HO-1 attenuates the proinflammatory effects

Heme oxygenase-1 protects endothelial cells from the toxicity of air pollutant chemicals

Energy Technology Data Exchange (ETDEWEB)

Lawal, Akeem O.; Zhang, Min; Dittmar, Michael [Division of Cardiology, David Geffen School of Medicine, University of California, Los Angeles, 10833 Le Conte Avenue, CHS 43-264, Los Angeles, CA 90095 (United States); Lulla, Aaron [Division of Cardiology, David Geffen School of Medicine, University of California, Los Angeles, 10833 Le Conte Avenue, CHS 43-264, Los Angeles, CA 90095 (United States); Molecular Toxicology Interdepartmental Program, University of California, Los Angeles (United States); Araujo, Jesus A., E-mail: JAraujo@mednet.ucla.edu [Division of Cardiology, David Geffen School of Medicine, University of California, Los Angeles, 10833 Le Conte Avenue, CHS 43-264, Los Angeles, CA 90095 (United States); Molecular Toxicology Interdepartmental Program, University of California, Los Angeles (United States); Molecular Biology Institute, University of California, Los Angeles (United States)

2015-05-01

Diesel exhaust particles (DEPs) are a major component of diesel emissions, responsible for a large portion of their toxicity. In this study, we examined the toxic effects of DEPs on endothelial cells and the role of DEP-induced heme oxygenase-1 (HO-1) expression. Human microvascular endothelial cells (HMECs) were treated with an organic extract of DEPs from an automobile engine (A-DEP) or a forklift engine (F-DEP) for 1 and 4 h. ROS generation, cell viability, lactate dehydrogenase leakage, expression of HO-1, inflammatory genes, cell adhesion molecules and unfolded protein respone (UPR) gene were assessed. HO-1 expression and/or activity were inhibited by siRNA or tin protoporphyrin (Sn PPIX) and enhanced by an expression plasmid or cobalt protoporphyrin (CoPPIX). Exposure to 25 μg/ml of A-DEP and F-DEP significantly induced ROS production, cellular toxicity and greater levels of inflammatory and cellular adhesion molecules but to a different degree. Inhibition of HO-1 enzymatic activity with SnPPIX and silencing of the HO-1 gene by siRNA enhanced DEP-induced ROS production, further decreased cell viability and increased expression of inflammatory and cell adhesion molecules. On the other hand, overexpression of the HO-1 gene by a pcDNA 3.1D/V5-HO-1 plasmid significantly mitigated ROS production, increased cell survival and decreased the expression of inflammatory genes. HO-1 expression protected HMECs from DEP-induced prooxidative and proinflammatory effects. Modulation of HO-1 expression could potentially serve as a therapeutic target in an attempt to inhibit the cardiovascular effects of ambient PM. - Highlights: • We examined the role of HO-1 expression on diesel exhaust particle (DEP) in endothelial cells. • DEPs exert cytotoxic and inflammatory effects on human microvascular endothelial cells (HMECs). • DEPs induce HO-1 expression in HMECs. • HO-1 protects against the oxidative stress induced by DEps. • HO-1 attenuates the proinflammatory effects

El depósito de armas del bronce final de «Los Cascajos», Grañón (La Rioja

Directory of Open Access Journals (Sweden)

Alonso Fernández, Carmen

2009-12-01

Full Text Available The until now unpublished hoard of weapons from «Los Cascajos» is exceptional in its geographical context, since it is the only one recovered in the province of La Rioja, and it is also exceptional at the Peninsular level for the pieces that make it up: number, typology, origin and conservation. It’s a set of metal pieces from the transit of the Late Bronze Age I to the Late Bronze Age II (1200-1000 B.C., some of them unpublished in the Peninsula, since they are not of local manufacture but imported from other territories of the Atlantic Bronze Age. The formal characteristics of some pieces point to the Thames Valley as place of origin, although it is not possible to dismiss the Gallic origin of others.

El hasta ahora inédito depósito de armas de «Los Cascajos» es excepcional dentro de su contexto geográfico, ya que es el único recuperado en la provincia de La Rioja, pero también a nivel peninsular por las piezas que lo integran: por su número, tipología, origen y conservación. Se trata de un conjunto de metales del tránsito del BFI al BFII (1200-1000 a.C., algunos de ellos inéditos en la Península, ya que no son de factura local, sino importados de otros territorios del Bronce Atlántico. Las características formales de algunas piezas señalan el Valle del Támesis como lugar de procedencia, aunque sin descartar el origen galo de otras.

Diesel Exhaust Particles Contribute to Endothelia Apoptosis via Autophagy Pathway.

Science.gov (United States)

Wang, Jhih-Syuan; Tseng, Chia-Yi; Chao, Ming-Wei

2017-03-01

Epidemiological studies suggest that an increase of PM2.5 diesel exhaust particles (DEP) in ambient air corresponds to increased myocardial infarctions and atherosclerosis. When exposed to DEP, endothelial cells exhibit increases in oxidative stress and apoptosis, but the role of autophagy in this DEP-induced cell death remains unclear. Here, we suggest that acute DEP exposure produces intracellular reactive oxygen species (ROS) leading to induction of DEP internalization, endothelial dysfunction, and pro-inflammation in an in vitro human umbilical vein endothelial cells (HUVEC) model. This study found that increases in intracellular oxidative stress and cellular internalization of DEP occurred within 2 h of exposure to DEP. After 2 h of DEP exposure, Mdm2 expression was increased, which triggered cellular autophagy after 4 h of DEP exposure and suppressed cellular senescence. Unfortunately, phagocytized DEP could not be eliminated by cellular autophagy, which led to a continuous buildup of ROS, an increased release of cytokines, and an increased expression of anchoring molecules. After 12 h of DEP exposure, HUVEC reduced Mdm2 expression leading to increased p53 expression, which triggered apoptosis and ultimately resulted in endothelial dysfunction. On the other hand, when cells lacked the ability to induce autophagy, DEP was unable to induce cell senescence and most of the cells survived with only a small percentage of the cells undergoing necrosis. The results presented in this study clearly demonstrate the role cellular autophagy plays in DEP-induced atherosclerosis. © The Author 2016. Published by Oxford University Press on behalf of the Society of Toxicology. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Aztheca Code

International Nuclear Information System (INIS)

Quezada G, S.; Espinosa P, G.; Centeno P, J.; Sanchez M, H.

2017-09-01

This paper presents the Aztheca code, which is formed by the mathematical models of neutron kinetics, power generation, heat transfer, core thermo-hydraulics, recirculation systems, dynamic pressure and level models and control system. The Aztheca code is validated with plant data, as well as with predictions from the manufacturer when the reactor operates in a stationary state. On the other hand, to demonstrate that the model is applicable during a transient, an event occurred in a nuclear power plant with a BWR reactor is selected. The plant data are compared with the results obtained with RELAP-5 and the Aztheca model. The results show that both RELAP-5 and the Aztheca code have the ability to adequately predict the behavior of the reactor. (Author)

Critical Care Coding for Neurologists.

Science.gov (United States)

Nuwer, Marc R; Vespa, Paul M

2015-10-01

Accurate coding is an important function of neurologic practice. This contribution to Continuum is part of an ongoing series that presents helpful coding information along with examples related to the issue topic. Tips for diagnosis coding, Evaluation and Management coding, procedure coding, or a combination are presented, depending on which is most applicable to the subject area of the issue.

FERRET data analysis code

International Nuclear Information System (INIS)

Schmittroth, F.

1979-09-01

A documentation of the FERRET data analysis code is given. The code provides a way to combine related measurements and calculations in a consistent evaluation. Basically a very general least-squares code, it is oriented towards problems frequently encountered in nuclear data and reactor physics. A strong emphasis is on the proper treatment of uncertainties and correlations and in providing quantitative uncertainty estimates. Documentation includes a review of the method, structure of the code, input formats, and examples

Enhancing QR Code Security

OpenAIRE

Zhang, Linfan; Zheng, Shuang

2015-01-01

Quick Response code opens possibility to convey data in a unique way yet insufficient prevention and protection might lead into QR code being exploited on behalf of attackers. This thesis starts by presenting a general introduction of background and stating two problems regarding QR code security, which followed by a comprehensive research on both QR code itself and related issues. From the research a solution taking advantages of cloud and cryptography together with an implementation come af...

The Aesthetics of Coding

DEFF Research Database (Denmark)

Andersen, Christian Ulrik

2007-01-01

Computer art is often associated with computer-generated expressions (digitally manipulated audio/images in music, video, stage design, media facades, etc.). In recent computer art, however, the code-text itself – not the generated output – has become the artwork (Perl Poetry, ASCII Art, obfuscated...... code, etc.). The presentation relates this artistic fascination of code to a media critique expressed by Florian Cramer, claiming that the graphical interface represents a media separation (of text/code and image) causing alienation to the computer’s materiality. Cramer is thus the voice of a new ‘code...... avant-garde’. In line with Cramer, the artists Alex McLean and Adrian Ward (aka Slub) declare: “art-oriented programming needs to acknowledge the conditions of its own making – its poesis.” By analysing the Live Coding performances of Slub (where they program computer music live), the presentation...

Nanometer size diesel exhaust particles are selectively toxic to dopaminergic neurons: the role of microglia, phagocytosis, and NADPH oxidase.

Science.gov (United States)

Block, M L; Wu, X; Pei, Z; Li, G; Wang, T; Qin, L; Wilson, B; Yang, J; Hong, J S; Veronesi, B

2004-10-01

The contributing role of environmental factors to the development of Parkinson's disease has become increasingly evident. We report that mesencephalic neuron-glia cultures treated with diesel exhaust particles (DEP; 0.22 microM) (5-50 microg/ml) resulted in a dose-dependent decrease in dopaminergic (DA) neurons, as determined by DA-uptake assay and tyrosine-hydroxylase immunocytochemistry (ICC). The selective toxicity of DEP for DA neurons was demonstrated by the lack of DEP effect on both GABA uptake and Neu-N immunoreactive cell number. The critical role of microglia was demonstrated by the failure of neuron-enriched cultures to exhibit DEP-induced DA neurotoxicity, where DEP-induced DA neuron death was reinstated with the addition of microglia to neuron-enriched cultures. OX-42 ICC staining of DEP treated neuron-glia cultures revealed changes in microglia morphology indicative of activation. Intracellular reactive oxygen species and superoxide were produced from enriched-microglia cultures in response to DEP. Neuron-glia cultures from NADPH oxidase deficient (PHOX-/-) mice were insensitive to DEP neurotoxicity when compared with control mice (PHOX+/+). Cytochalasin D inhibited DEP-induced superoxide production in enriched-microglia cultures, implying that DEP must be phagocytized by microglia to produce superoxide. Together, these in vitro data indicate that DEP selectively damages DA neurons through the phagocytic activation of microglial NADPH oxidase and consequent oxidative insult.

Reliability-Based Code Calibration

DEFF Research Database (Denmark)

Faber, M.H.; Sørensen, John Dalsgaard

2003-01-01

The present paper addresses fundamental concepts of reliability based code calibration. First basic principles of structural reliability theory are introduced and it is shown how the results of FORM based reliability analysis may be related to partial safety factors and characteristic values....... Thereafter the code calibration problem is presented in its principal decision theoretical form and it is discussed how acceptable levels of failure probability (or target reliabilities) may be established. Furthermore suggested values for acceptable annual failure probabilities are given for ultimate...... and serviceability limit states. Finally the paper describes the Joint Committee on Structural Safety (JCSS) recommended procedure - CodeCal - for the practical implementation of reliability based code calibration of LRFD based design codes....

Validation of thermalhydraulic codes

International Nuclear Information System (INIS)

Wilkie, D.

1992-01-01

Thermalhydraulic codes require to be validated against experimental data collected over a wide range of situations if they are to be relied upon. A good example is provided by the nuclear industry where codes are used for safety studies and for determining operating conditions. Errors in the codes could lead to financial penalties, to the incorrect estimation of the consequences of accidents and even to the accidents themselves. Comparison between prediction and experiment is often described qualitatively or in approximate terms, e.g. ''agreement is within 10%''. A quantitative method is preferable, especially when several competing codes are available. The codes can then be ranked in order of merit. Such a method is described. (Author)

Code-Switching: L1-Coded Mediation in a Kindergarten Foreign Language Classroom

Science.gov (United States)

Lin, Zheng

2012-01-01

This paper is based on a qualitative inquiry that investigated the role of teachers' mediation in three different modes of coding in a kindergarten foreign language classroom in China (i.e. L2-coded intralinguistic mediation, L1-coded cross-lingual mediation, and L2-and-L1-mixed mediation). Through an exploratory examination of the varying effects…

Introduction of SCIENCE code package

International Nuclear Information System (INIS)

Lu Haoliang; Li Jinggang; Zhu Ya'nan; Bai Ning

2012-01-01

The SCIENCE code package is a set of neutronics tools based on 2D assembly calculations and 3D core calculations. It is made up of APOLLO2F, SMART and SQUALE and used to perform the nuclear design and loading pattern analysis for the reactors on operation or under construction of China Guangdong Nuclear Power Group. The purpose of paper is to briefly present the physical and numerical models used in each computation codes of the SCIENCE code pack age, including the description of the general structure of the code package, the coupling relationship of APOLLO2-F transport lattice code and SMART core nodal code, and the SQUALE code used for processing the core maps. (authors)

Design of convolutional tornado code

Science.gov (United States)

Zhou, Hui; Yang, Yao; Gao, Hongmin; Tan, Lu

2017-09-01

As a linear block code, the traditional tornado (tTN) code is inefficient in burst-erasure environment and its multi-level structure may lead to high encoding/decoding complexity. This paper presents a convolutional tornado (cTN) code which is able to improve the burst-erasure protection capability by applying the convolution property to the tTN code, and reduce computational complexity by abrogating the multi-level structure. The simulation results show that cTN code can provide a better packet loss protection performance with lower computation complexity than tTN code.

MARS Code in Linux Environment

Energy Technology Data Exchange (ETDEWEB)

Hwang, Moon Kyu; Bae, Sung Won; Jung, Jae Joon; Chung, Bub Dong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

2005-07-01

The two-phase system analysis code MARS has been incorporated into Linux system. The MARS code was originally developed based on the RELAP5/MOD3.2 and COBRA-TF. The 1-D module which evolved from RELAP5 alone could be applied for the whole NSSS system analysis. The 3-D module developed based on the COBRA-TF, however, could be applied for the analysis of the reactor core region where 3-D phenomena would be better treated. The MARS code also has several other code units that could be incorporated for more detailed analysis. The separate code units include containment analysis modules and 3-D kinetics module. These code modules could be optionally invoked to be coupled with the main MARS code. The containment code modules (CONTAIN and CONTEMPT), for example, could be utilized for the analysis of the plant containment phenomena in a coupled manner with the nuclear reactor system. The mass and energy interaction during the hypothetical coolant leakage accident could, thereby, be analyzed in a more realistic manner. In a similar way, 3-D kinetics could be incorporated for simulating the three dimensional reactor kinetic behavior, instead of using the built-in point kinetics model. The MARS code system, developed initially for the MS Windows environment, however, would not be adequate enough for the PC cluster system where multiple CPUs are available. When parallelism is to be eventually incorporated into the MARS code, MS Windows environment is not considered as an optimum platform. Linux environment, on the other hand, is generally being adopted as a preferred platform for the multiple codes executions as well as for the parallel application. In this study, MARS code has been modified for the adaptation of Linux platform. For the initial code modification, the Windows system specific features have been removed from the code. Since the coupling code module CONTAIN is originally in a form of dynamic load library (DLL) in the Windows system, a similar adaptation method

MARS Code in Linux Environment

International Nuclear Information System (INIS)

Hwang, Moon Kyu; Bae, Sung Won; Jung, Jae Joon; Chung, Bub Dong

2005-01-01

The two-phase system analysis code MARS has been incorporated into Linux system. The MARS code was originally developed based on the RELAP5/MOD3.2 and COBRA-TF. The 1-D module which evolved from RELAP5 alone could be applied for the whole NSSS system analysis. The 3-D module developed based on the COBRA-TF, however, could be applied for the analysis of the reactor core region where 3-D phenomena would be better treated. The MARS code also has several other code units that could be incorporated for more detailed analysis. The separate code units include containment analysis modules and 3-D kinetics module. These code modules could be optionally invoked to be coupled with the main MARS code. The containment code modules (CONTAIN and CONTEMPT), for example, could be utilized for the analysis of the plant containment phenomena in a coupled manner with the nuclear reactor system. The mass and energy interaction during the hypothetical coolant leakage accident could, thereby, be analyzed in a more realistic manner. In a similar way, 3-D kinetics could be incorporated for simulating the three dimensional reactor kinetic behavior, instead of using the built-in point kinetics model. The MARS code system, developed initially for the MS Windows environment, however, would not be adequate enough for the PC cluster system where multiple CPUs are available. When parallelism is to be eventually incorporated into the MARS code, MS Windows environment is not considered as an optimum platform. Linux environment, on the other hand, is generally being adopted as a preferred platform for the multiple codes executions as well as for the parallel application. In this study, MARS code has been modified for the adaptation of Linux platform. For the initial code modification, the Windows system specific features have been removed from the code. Since the coupling code module CONTAIN is originally in a form of dynamic load library (DLL) in the Windows system, a similar adaptation method

Stylize Aesthetic QR Code

OpenAIRE

Xu, Mingliang; Su, Hao; Li, Yafei; Li, Xi; Liao, Jing; Niu, Jianwei; Lv, Pei; Zhou, Bing

2018-01-01

With the continued proliferation of smart mobile devices, Quick Response (QR) code has become one of the most-used types of two-dimensional code in the world. Aiming at beautifying the appearance of QR codes, existing works have developed a series of techniques to make the QR code more visual-pleasant. However, these works still leave much to be desired, such as visual diversity, aesthetic quality, flexibility, universal property, and robustness. To address these issues, in this paper, we pro...

Fulcrum Network Codes

DEFF Research Database (Denmark)

2015-01-01

Fulcrum network codes, which are a network coding framework, achieve three objectives: (i) to reduce the overhead per coded packet to almost 1 bit per source packet; (ii) to operate the network using only low field size operations at intermediate nodes, dramatically reducing complexity...... in the network; and (iii) to deliver an end-to-end performance that is close to that of a high field size network coding system for high-end receivers while simultaneously catering to low-end ones that can only decode in a lower field size. Sources may encode using a high field size expansion to increase...... the number of dimensions seen by the network using a linear mapping. Receivers can tradeoff computational effort with network delay, decoding in the high field size, the low field size, or a combination thereof....

The fast code

Energy Technology Data Exchange (ETDEWEB)

Freeman, L.N.; Wilson, R.E. [Oregon State Univ., Dept. of Mechanical Engineering, Corvallis, OR (United States)

1996-09-01

The FAST Code which is capable of determining structural loads on a flexible, teetering, horizontal axis wind turbine is described and comparisons of calculated loads with test data are given at two wind speeds for the ESI-80. The FAST Code models a two-bladed HAWT with degrees of freedom for blade bending, teeter, drive train flexibility, yaw, and windwise and crosswind tower motion. The code allows blade dimensions, stiffnesses, and weights to differ and models tower shadow, wind shear, and turbulence. Additionally, dynamic stall is included as are delta-3 and an underslung rotor. Load comparisons are made with ESI-80 test data in the form of power spectral density, rainflow counting, occurrence histograms, and azimuth averaged bin plots. It is concluded that agreement between the FAST Code and test results is good. (au)

Beam-dynamics codes used at DARHT

Energy Technology Data Exchange (ETDEWEB)

Ekdahl, Jr., Carl August [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-02-01

Several beam simulation codes are used to help gain a better understanding of beam dynamics in the DARHT LIAs. The most notable of these fall into the following categories: for beam production – Tricomp Trak orbit tracking code, LSP Particle in cell (PIC) code, for beam transport and acceleration – XTR static envelope and centroid code, LAMDA time-resolved envelope and centroid code, LSP-Slice PIC code, for coasting-beam transport to target – LAMDA time-resolved envelope code, LSP-Slice PIC code. These codes are also being used to inform the design of Scorpius.

Strongly-MDS convolutional codes

NARCIS (Netherlands)

Gluesing-Luerssen, H; Rosenthal, J; Smarandache, R

Maximum-distance separable (MDS) convolutional codes have the property that their free distance is maximal among all codes of the same rate and the same degree. In this paper, a class of MDS convolutional codes is introduced whose column distances reach the generalized Singleton bound at the

Interface requirements to couple thermal hydraulics codes to severe accident codes: ICARE/CATHARE

Energy Technology Data Exchange (ETDEWEB)

Camous, F.; Jacq, F.; Chatelard, P. [IPSN/DRS/SEMAR CE-Cadarache, St Paul Lez Durance (France)] [and others

1997-07-01

In order to describe with the same code the whole sequence of severe LWR accidents, up to the vessel failure, the Institute of Protection and Nuclear Safety has performed a coupling of the severe accident code ICARE2 to the thermalhydraulics code CATHARE2. The resulting code, ICARE/CATHARE, is designed to be as pertinent as possible in all the phases of the accident. This paper is mainly devoted to the description of the ICARE2-CATHARE2 coupling.

Interactive effects of cerium oxide and diesel exhaust nanoparticles on inducing pulmonary fibrosis

Energy Technology Data Exchange (ETDEWEB)

Ma, Jane Y.C., E-mail: jym1@cdc.gov [Health Effects Laboratory Division, National Institute for Occupational Safety and Health, Morgantown, WV 26505 (United States); Young, Shih-Houng; Mercer, Robert R.; Barger, Mark; Schwegler-Berry, Diane [Health Effects Laboratory Division, National Institute for Occupational Safety and Health, Morgantown, WV 26505 (United States); Ma, Joseph K. [School of Pharmacy, West Virginia University, Morgantown, WV 26506 (United States); Castranova, Vincent [Health Effects Laboratory Division, National Institute for Occupational Safety and Health, Morgantown, WV 26505 (United States)

2014-07-15

Cerium compounds have been used as a fuel-borne catalyst to lower the generation of diesel exhaust particles (DEPs), but are emitted as cerium oxide nanoparticles (CeO{sub 2}) along with DEP in the diesel exhaust. The present study investigates the effects of the combined exposure to DEP and CeO{sub 2} on the pulmonary system in a rat model. Specific pathogen-free male Sprague–Dawley rats were exposed to CeO{sub 2} and/or DEP via a single intratracheal instillation and were sacrificed at various time points post-exposure. This investigation demonstrated that CeO{sub 2} induces a sustained inflammatory response, whereas DEP elicits a switch of the pulmonary immune response from Th1 to Th2. Both CeO{sub 2} and DEP activated AM and lymphocyte secretion of the proinflammatory cytokines IL-12 and IFN-γ, respectively. However, only DEP enhanced the anti-inflammatory cytokine IL-10 production in response to ex vivo LPS or Concanavalin A challenge that was not affected by the presence of CeO{sub 2}, suggesting that DEP suppresses host defense capability by inducing the Th2 immunity. The micrographs of lymph nodes show that the particle clumps in DEP + CeO{sub 2} were significantly larger than CeO{sub 2} or DEP, exhibiting dense clumps continuous throughout the lymph nodes. Morphometric analysis demonstrates that the localization of collagen in the lung tissue after DEP + CeO{sub 2} reflects the combination of DEP-exposure plus CeO{sub 2}-exposure. At 4 weeks post-exposure, the histological features demonstrated that CeO{sub 2} induced lung phospholipidosis and fibrosis. DEP induced lung granulomas that were not significantly affected by the presence of CeO{sub 2} in the combined exposure. Using CeO{sub 2} as diesel fuel catalyst may cause health concerns. - Highlights: • DEP induced acute lung inflammation and switched immune response from Th1 to Th2. • DEP induced lung granulomas were not affected by the presence of CeO{sub 2}. • CeO{sub 2} induced sustained lung

Gravity inversion code

International Nuclear Information System (INIS)

Burkhard, N.R.

1979-01-01

The gravity inversion code applies stabilized linear inverse theory to determine the topography of a subsurface density anomaly from Bouguer gravity data. The gravity inversion program consists of four source codes: SEARCH, TREND, INVERT, and AVERAGE. TREND and INVERT are used iteratively to converge on a solution. SEARCH forms the input gravity data files for Nevada Test Site data. AVERAGE performs a covariance analysis on the solution. This document describes the necessary input files and the proper operation of the code. 2 figures, 2 tables

Introduction to coding and information theory

CERN Document Server

Roman, Steven

1997-01-01

This book is intended to introduce coding theory and information theory to undergraduate students of mathematics and computer science. It begins with a review of probablity theory as applied to finite sample spaces and a general introduction to the nature and types of codes. The two subsequent chapters discuss information theory: efficiency of codes, the entropy of information sources, and Shannon's Noiseless Coding Theorem. The remaining three chapters deal with coding theory: communication channels, decoding in the presence of errors, the general theory of linear codes, and such specific codes as Hamming codes, the simplex codes, and many others.

Random linear codes in steganography

Directory of Open Access Journals (Sweden)

Kamil Kaczyński

2016-12-01

Full Text Available Syndrome coding using linear codes is a technique that allows improvement in the steganographic algorithms parameters. The use of random linear codes gives a great flexibility in choosing the parameters of the linear code. In parallel, it offers easy generation of parity check matrix. In this paper, the modification of LSB algorithm is presented. A random linear code [8, 2] was used as a base for algorithm modification. The implementation of the proposed algorithm, along with practical evaluation of algorithms’ parameters based on the test images was made.[b]Keywords:[/b] steganography, random linear codes, RLC, LSB

The role of MAC1 in diesel exhaust particle-induced microglial activation and loss of dopaminergic neuron function.

Science.gov (United States)

Levesque, Shannon; Taetzsch, Thomas; Lull, Melinda E; Johnson, Jo Anne; McGraw, Constance; Block, Michelle L

2013-06-01

Increasing reports support that air pollution causes neuroinflammation and is linked to central nervous system (CNS) disease/damage. Diesel exhaust particles (DEP) are a major component of urban air pollution, which has been linked to microglial activation and Parkinson's disease-like pathology. To begin to address how DEP may exert CNS effects, microglia and neuron-glia cultures were treated with either nanometer-sized DEP (neuron function was assessed. All three treatments showed enhanced ameboid microglia morphology, increased H2 O2 production, and decreased DA uptake. Mechanistic inquiry revealed that the scavenger receptor inhibitor fucoidan blocked DEP internalization in microglia, but failed to alter DEP-induced H2 O2 production in microglia. However, pre-treatment with the MAC1/CD11b inhibitor antibody blocked microglial H2 O2 production in response to DEP. MAC1(-/-) mesencephalic neuron-glia cultures were protected from DEP-induced loss of DA neuron function, as measured by DA uptake. These findings support that DEP may activate microglia through multiple mechanisms, where scavenger receptors regulate internalization of DEP and the MAC1 receptor is mandatory for both DEP-induced microglial H2 O2 production and loss of DA neuron function. © 2013 International Society for Neurochemistry.

Status of reactor core design code system in COSINE code package

Energy Technology Data Exchange (ETDEWEB)

Chen, Y.; Yu, H.; Liu, Z., E-mail: yuhui@snptc.com.cn [State Nuclear Power Software Development Center, SNPTC, National Energy Key Laboratory of Nuclear Power Software (NEKLS), Beijiing (China)

2014-07-01

For self-reliance, COre and System INtegrated Engine for design and analysis (COSINE) code package is under development in China. In this paper, recent development status of the reactor core design code system (including the lattice physics code and the core simulator) is presented. The well-established theoretical models have been implemented. The preliminary verification results are illustrated. And some special efforts, such as updated theory models and direct data access application, are also made to achieve better software product. (author)

Status of reactor core design code system in COSINE code package

International Nuclear Information System (INIS)

Chen, Y.; Yu, H.; Liu, Z.

2014-01-01

For self-reliance, COre and System INtegrated Engine for design and analysis (COSINE) code package is under development in China. In this paper, recent development status of the reactor core design code system (including the lattice physics code and the core simulator) is presented. The well-established theoretical models have been implemented. The preliminary verification results are illustrated. And some special efforts, such as updated theory models and direct data access application, are also made to achieve better software product. (author)

Further Generalisations of Twisted Gabidulin Codes

DEFF Research Database (Denmark)

Puchinger, Sven; Rosenkilde, Johan Sebastian Heesemann; Sheekey, John

2017-01-01

We present a new family of maximum rank distance (MRD) codes. The new class contains codes that are neither equivalent to a generalised Gabidulin nor to a twisted Gabidulin code, the only two known general constructions of linear MRD codes.......We present a new family of maximum rank distance (MRD) codes. The new class contains codes that are neither equivalent to a generalised Gabidulin nor to a twisted Gabidulin code, the only two known general constructions of linear MRD codes....

Differential Retention of Gene Functions in a Secondary Metabolite Cluster.

Science.gov (United States)

Reynolds, Hannah T; Slot, Jason C; Divon, Hege H; Lysøe, Erik; Proctor, Robert H; Brown, Daren W

2017-08-01

In fungi, distribution of secondary metabolite (SM) gene clusters is often associated with host- or environment-specific benefits provided by SMs. In the plant pathogen Alternaria brassicicola (Dothideomycetes), the DEP cluster confers an ability to synthesize the SM depudecin, a histone deacetylase inhibitor that contributes weakly to virulence. The DEP cluster includes genes encoding enzymes, a transporter, and a transcription regulator. We investigated the distribution and evolution of the DEP cluster in 585 fungal genomes and found a wide but sporadic distribution among Dothideomycetes, Sordariomycetes, and Eurotiomycetes. We confirmed DEP gene expression and depudecin production in one fungus, Fusarium langsethiae. Phylogenetic analyses suggested 6-10 horizontal gene transfers (HGTs) of the cluster, including a transfer that led to the presence of closely related cluster homologs in Alternaria and Fusarium. The analyses also indicated that HGTs were frequently followed by loss/pseudogenization of one or more DEP genes. Independent cluster inactivation was inferred in at least four fungal classes. Analyses of transitions among functional, pseudogenized, and absent states of DEP genes among Fusarium species suggest enzyme-encoding genes are lost at higher rates than the transporter (DEP3) and regulatory (DEP6) genes. The phenotype of an experimentally-induced DEP3 mutant of Fusarium did not support the hypothesis that selective retention of DEP3 and DEP6 protects fungi from exogenous depudecin. Together, the results suggest that HGT and gene loss have contributed significantly to DEP cluster distribution, and that some DEP genes provide a greater fitness benefit possibly due to a differential tendency to form network connections. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution 2017. This work is written by US Government employees and is in the public domain in the US.

Gap Conductance model Validation in the TASS/SMR-S code using MARS code

International Nuclear Information System (INIS)

Ahn, Sang Jun; Yang, Soo Hyung; Chung, Young Jong; Lee, Won Jae

2010-01-01

Korea Atomic Energy Research Institute (KAERI) has been developing the TASS/SMR-S (Transient and Setpoint Simulation/Small and Medium Reactor) code, which is a thermal hydraulic code for the safety analysis of the advanced integral reactor. An appropriate work to validate the applicability of the thermal hydraulic models within the code should be demanded. Among the models, the gap conductance model which is describes the thermal gap conductivity between fuel and cladding was validated through the comparison with MARS code. The validation of the gap conductance model was performed by evaluating the variation of the gap temperature and gap width as the changed with the power fraction. In this paper, a brief description of the gap conductance model in the TASS/SMR-S code is presented. In addition, calculated results to validate the gap conductance model are demonstrated by comparing with the results of the MARS code with the test case

Impacts of Model Building Energy Codes

Energy Technology Data Exchange (ETDEWEB)

Athalye, Rahul A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sivaraman, Deepak [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elliott, Douglas B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Liu, Bing [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bartlett, Rosemarie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-10-31

The U.S. Department of Energy (DOE) Building Energy Codes Program (BECP) periodically evaluates national and state-level impacts associated with energy codes in residential and commercial buildings. Pacific Northwest National Laboratory (PNNL), funded by DOE, conducted an assessment of the prospective impacts of national model building energy codes from 2010 through 2040. A previous PNNL study evaluated the impact of the Building Energy Codes Program; this study looked more broadly at overall code impacts. This report describes the methodology used for the assessment and presents the impacts in terms of energy savings, consumer cost savings, and reduced CO₂ emissions at the state level and at aggregated levels. This analysis does not represent all potential savings from energy codes in the U.S. because it excludes several states which have codes which are fundamentally different from the national model energy codes or which do not have state-wide codes. Energy codes follow a three-phase cycle that starts with the development of a new model code, proceeds with the adoption of the new code by states and local jurisdictions, and finishes when buildings comply with the code. The development of new model code editions creates the potential for increased energy savings. After a new model code is adopted, potential savings are realized in the field when new buildings (or additions and alterations) are constructed to comply with the new code. Delayed adoption of a model code and incomplete compliance with the code’s requirements erode potential savings. The contributions of all three phases are crucial to the overall impact of codes, and are considered in this assessment.

MORSE Monte Carlo code

International Nuclear Information System (INIS)

Cramer, S.N.

1984-01-01

The MORSE code is a large general-use multigroup Monte Carlo code system. Although no claims can be made regarding its superiority in either theoretical details or Monte Carlo techniques, MORSE has been, since its inception at ORNL in the late 1960s, the most widely used Monte Carlo radiation transport code. The principal reason for this popularity is that MORSE is relatively easy to use, independent of any installation or distribution center, and it can be easily customized to fit almost any specific need. Features of the MORSE code are described

Application of Quantum Gauss-Jordan Elimination Code to Quantum Secret Sharing Code

Science.gov (United States)

Diep, Do Ngoc; Giang, Do Hoang; Phu, Phan Huy

2018-03-01

The QSS codes associated with a MSP code are based on finding an invertible matrix V, solving the system vATMB (s a)=s. We propose a quantum Gauss-Jordan Elimination Procedure to produce such a pivotal matrix V by using the Grover search code. The complexity of solving is of square-root order of the cardinal number of the unauthorized set √ {2^{|B|}}.

Cryptography cracking codes

CERN Document Server

2014-01-01

While cracking a code might seem like something few of us would encounter in our daily lives, it is actually far more prevalent than we may realize. Anyone who has had personal information taken because of a hacked email account can understand the need for cryptography and the importance of encryption-essentially the need to code information to keep it safe. This detailed volume examines the logic and science behind various ciphers, their real world uses, how codes can be broken, and the use of technology in this oft-overlooked field.

The Coding Causes of Death in HIV (CoDe) Project: initial results and evaluation of methodology

DEFF Research Database (Denmark)

Kowalska, Justyna D; Friis-Møller, Nina; Kirk, Ole

2011-01-01

The Coding Causes of Death in HIV (CoDe) Project aims to deliver a standardized method for coding the underlying cause of death in HIV-positive persons, suitable for clinical trials and epidemiologic studies.......The Coding Causes of Death in HIV (CoDe) Project aims to deliver a standardized method for coding the underlying cause of death in HIV-positive persons, suitable for clinical trials and epidemiologic studies....

Allele coding in genomic evaluation

Directory of Open Access Journals (Sweden)

Christensen Ole F

2011-06-01

Full Text Available Abstract Background Genomic data are used in animal breeding to assist genetic evaluation. Several models to estimate genomic breeding values have been studied. In general, two approaches have been used. One approach estimates the marker effects first and then, genomic breeding values are obtained by summing marker effects. In the second approach, genomic breeding values are estimated directly using an equivalent model with a genomic relationship matrix. Allele coding is the method chosen to assign values to the regression coefficients in the statistical model. A common allele coding is zero for the homozygous genotype of the first allele, one for the heterozygote, and two for the homozygous genotype for the other allele. Another common allele coding changes these regression coefficients by subtracting a value from each marker such that the mean of regression coefficients is zero within each marker. We call this centered allele coding. This study considered effects of different allele coding methods on inference. Both marker-based and equivalent models were considered, and restricted maximum likelihood and Bayesian methods were used in inference. Results Theoretical derivations showed that parameter estimates and estimated marker effects in marker-based models are the same irrespective of the allele coding, provided that the model has a fixed general mean. For the equivalent models, the same results hold, even though different allele coding methods lead to different genomic relationship matrices. Calculated genomic breeding values are independent of allele coding when the estimate of the general mean is included into the values. Reliabilities of estimated genomic breeding values calculated using elements of the inverse of the coefficient matrix depend on the allele coding because different allele coding methods imply different models. Finally, allele coding affects the mixing of Markov chain Monte Carlo algorithms, with the centered coding being

Towers of generalized divisible quantum codes

Science.gov (United States)

Haah, Jeongwan

2018-04-01

A divisible binary classical code is one in which every code word has weight divisible by a fixed integer. If the divisor is 2ν for a positive integer ν , then one can construct a Calderbank-Shor-Steane (CSS) code, where X -stabilizer space is the divisible classical code, that admits a transversal gate in the ν th level of Clifford hierarchy. We consider a generalization of the divisibility by allowing a coefficient vector of odd integers with which every code word has zero dot product modulo the divisor. In this generalized sense, we construct a CSS code with divisor 2ν +1 and code distance d from any CSS code of code distance d and divisor 2ν where the transversal X is a nontrivial logical operator. The encoding rate of the new code is approximately d times smaller than that of the old code. In particular, for large d and ν ≥2 , our construction yields a CSS code of parameters [[O (dν -1) ,Ω (d ) ,d ] ] admitting a transversal gate at the ν th level of Clifford hierarchy. For our construction we introduce a conversion from magic state distillation protocols based on Clifford measurements to those based on codes with transversal T gates. Our tower contains, as a subclass, generalized triply even CSS codes that have appeared in so-called gauge fixing or code switching methods.

Essential idempotents and simplex codes

Directory of Open Access Journals (Sweden)

Gladys Chalom

2017-01-01

Full Text Available We define essential idempotents in group algebras and use them to prove that every mininmal abelian non-cyclic code is a repetition code. Also we use them to prove that every minimal abelian code is equivalent to a minimal cyclic code of the same length. Finally, we show that a binary cyclic code is simplex if and only if is of length of the form $n=2^k-1$ and is generated by an essential idempotent.

Advanced thermohydraulic simulation code for transients in LMFBRs (SSC-L code)

Energy Technology Data Exchange (ETDEWEB)

Agrawal, A.K.

1978-02-01

Physical models for various processes that are encountered in preaccident and transient simulation of thermohydraulic transients in the entire liquid metal fast breeder reactor (LMFBR) plant are described in this report. A computer code, SSC-L, was written as a part of the Super System Code (SSC) development project for the ''loop''-type designs of LMFBRs. This code has the self-starting capability, i.e., preaccident or steady-state calculations are performed internally. These results then serve as the starting point for the transient simulation.

Advanced thermohydraulic simulation code for transients in LMFBRs (SSC-L code)

International Nuclear Information System (INIS)

Agrawal, A.K.

1978-02-01

Physical models for various processes that are encountered in preaccident and transient simulation of thermohydraulic transients in the entire liquid metal fast breeder reactor (LMFBR) plant are described in this report. A computer code, SSC-L, was written as a part of the Super System Code (SSC) development project for the ''loop''-type designs of LMFBRs. This code has the self-starting capability, i.e., preaccident or steady-state calculations are performed internally. These results then serve as the starting point for the transient simulation

When sparse coding meets ranking: a joint framework for learning sparse codes and ranking scores

KAUST Repository

Wang, Jim Jing-Yan

2017-06-28

Sparse coding, which represents a data point as a sparse reconstruction code with regard to a dictionary, has been a popular data representation method. Meanwhile, in database retrieval problems, learning the ranking scores from data points plays an important role. Up to now, these two problems have always been considered separately, assuming that data coding and ranking are two independent and irrelevant problems. However, is there any internal relationship between sparse coding and ranking score learning? If yes, how to explore and make use of this internal relationship? In this paper, we try to answer these questions by developing the first joint sparse coding and ranking score learning algorithm. To explore the local distribution in the sparse code space, and also to bridge coding and ranking problems, we assume that in the neighborhood of each data point, the ranking scores can be approximated from the corresponding sparse codes by a local linear function. By considering the local approximation error of ranking scores, the reconstruction error and sparsity of sparse coding, and the query information provided by the user, we construct a unified objective function for learning of sparse codes, the dictionary and ranking scores. We further develop an iterative algorithm to solve this optimization problem.

Error Correcting Codes

Indian Academy of Sciences (India)

Science and Automation at ... the Reed-Solomon code contained 223 bytes of data, (a byte ... then you have a data storage system with error correction, that ..... practical codes, storing such a table is infeasible, as it is generally too large.

Combined effects of diethylpropion and alcohol on locomotor activity of mice: participation of the dopaminergic and opioid systems

Directory of Open Access Journals (Sweden)

Gevaerd M.S.

1999-01-01

Full Text Available The widespread consumption of anorectics and combined anorectic + alcohol misuse are problems in Brazil. In order to better understand the interactive effects of ethanol (EtOH and diethylpropion (DEP we examined the locomotion-activating effects of these drugs given alone or in combination in mice. We also determined whether this response was affected by dopamine (DA or opioid receptor antagonists. A total of 160 male Swiss mice weighing approximately 30 g were divided into groups of 8 animals per group. The animals were treated daily for 7 consecutive days with combined EtOH + DEP (1.2 g/kg and 5.0 mg/kg, ip, EtOH (1.2 g/kg, ip, DEP (5.0 mg/kg, ip or the control solution coadministered with the DA antagonist haloperidol (HAL, 0.075 mg/kg, ip, the opioid antagonist naloxone (NAL, 1.0 mg/kg, ip, or vehicle. On days 1, 7 and 10 after the injections, mice were assessed in activity cages at different times (15, 30, 45 and 60 min for 5 min. The acute combination of EtOH plus DEP induced a significantly higher increase in locomotor activity (day 1: 369.5 ± 34.41 when compared to either drug alone (day 1: EtOH = 232.5 ± 23.79 and DEP = 276.0 ± 12.85 and to control solution (day 1: 153.12 ± 7.64. However, the repeated administration of EtOH (day 7: 314.63 ± 26.79 and day 10: 257.62 ± 29.91 or DEP (day 7: 309.5 ± 31.65 and day 10: 321.12 ± 39.24 alone or in combination (day 7: 459.75 ± 41.28 and day 10: 427.87 ± 33.0 failed to induce a progressive increase in the locomotor response. These data demonstrate greater locomotion-activating effects of the EtOH + DEP combination, probably involving DA and/or opioid receptor stimulation, since the daily pretreatment with HAL (day 1: EtOH + DEP = 395.62 ± 11.92 and EtOH + DEP + HAL = 371.5 ± 6.76; day 7: EtOH + DEP = 502.5 ± 42.27 and EtOH + DEP + HAL = 281.12 ± 16.08; day 10: EtOH + DEP = 445.75 ± 16.64 and EtOH + DEP + HAL = 376.75 ± 16.4 and NAL (day 1: EtOH + DEP = 553.62 ± 38.15 and Et

Coded diffraction system in X-ray crystallography using a boolean phase coded aperture approximation

Science.gov (United States)

Pinilla, Samuel; Poveda, Juan; Arguello, Henry

2018-03-01

Phase retrieval is a problem present in many applications such as optics, astronomical imaging, computational biology and X-ray crystallography. Recent work has shown that the phase can be better recovered when the acquisition architecture includes a coded aperture, which modulates the signal before diffraction, such that the underlying signal is recovered from coded diffraction patterns. Moreover, this type of modulation effect, before the diffraction operation, can be obtained using a phase coded aperture, just after the sample under study. However, a practical implementation of a phase coded aperture in an X-ray application is not feasible, because it is computationally modeled as a matrix with complex entries which requires changing the phase of the diffracted beams. In fact, changing the phase implies finding a material that allows to deviate the direction of an X-ray beam, which can considerably increase the implementation costs. Hence, this paper describes a low cost coded X-ray diffraction system based on block-unblock coded apertures that enables phase reconstruction. The proposed system approximates the phase coded aperture with a block-unblock coded aperture by using the detour-phase method. Moreover, the SAXS/WAXS X-ray crystallography software was used to simulate the diffraction patterns of a real crystal structure called Rhombic Dodecahedron. Additionally, several simulations were carried out to analyze the performance of block-unblock approximations in recovering the phase, using the simulated diffraction patterns. Furthermore, the quality of the reconstructions was measured in terms of the Peak Signal to Noise Ratio (PSNR). Results show that the performance of the block-unblock phase coded apertures approximation decreases at most 12.5% compared with the phase coded apertures. Moreover, the quality of the reconstructions using the boolean approximations is up to 2.5 dB of PSNR less with respect to the phase coded aperture reconstructions.

Visual search asymmetries within color-coded and intensity-coded displays.

Science.gov (United States)

Yamani, Yusuke; McCarley, Jason S

2010-06-01

Color and intensity coding provide perceptual cues to segregate categories of objects within a visual display, allowing operators to search more efficiently for needed information. Even within a perceptually distinct subset of display elements, however, it may often be useful to prioritize items representing urgent or task-critical information. The design of symbology to produce search asymmetries (Treisman & Souther, 1985) offers a potential technique for doing this, but it is not obvious from existing models of search that an asymmetry observed in the absence of extraneous visual stimuli will persist within a complex color- or intensity-coded display. To address this issue, in the current study we measured the strength of a visual search asymmetry within displays containing color- or intensity-coded extraneous items. The asymmetry persisted strongly in the presence of extraneous items that were drawn in a different color (Experiment 1) or a lower contrast (Experiment 2) than the search-relevant items, with the targets favored by the search asymmetry producing highly efficient search. The asymmetry was attenuated but not eliminated when extraneous items were drawn in a higher contrast than search-relevant items (Experiment 3). Results imply that the coding of symbology to exploit visual search asymmetries can facilitate visual search for high-priority items even within color- or intensity-coded displays. PsycINFO Database Record (c) 2010 APA, all rights reserved.

MCNP code

International Nuclear Information System (INIS)

Cramer, S.N.

1984-01-01

The MCNP code is the major Monte Carlo coupled neutron-photon transport research tool at the Los Alamos National Laboratory, and it represents the most extensive Monte Carlo development program in the United States which is available in the public domain. The present code is the direct descendent of the original Monte Carlo work of Fermi, von Neumaum, and Ulam at Los Alamos in the 1940s. Development has continued uninterrupted since that time, and the current version of MCNP (or its predecessors) has always included state-of-the-art methods in the Monte Carlo simulation of radiation transport, basic cross section data, geometry capability, variance reduction, and estimation procedures. The authors of the present code have oriented its development toward general user application. The documentation, though extensive, is presented in a clear and simple manner with many examples, illustrations, and sample problems. In addition to providing the desired results, the output listings give a a wealth of detailed information (some optional) concerning each state of the calculation. The code system is continually updated to take advantage of advances in computer hardware and software, including interactive modes of operation, diagnostic interrupts and restarts, and a variety of graphical and video aids

Under-coding of secondary conditions in coded hospital health data: Impact of co-existing conditions, death status and number of codes in a record.

Science.gov (United States)

Peng, Mingkai; Southern, Danielle A; Williamson, Tyler; Quan, Hude

2017-12-01

This study examined the coding validity of hypertension, diabetes, obesity and depression related to the presence of their co-existing conditions, death status and the number of diagnosis codes in hospital discharge abstract database. We randomly selected 4007 discharge abstract database records from four teaching hospitals in Alberta, Canada and reviewed their charts to extract 31 conditions listed in Charlson and Elixhauser comorbidity indices. Conditions associated with the four study conditions were identified through multivariable logistic regression. Coding validity (i.e. sensitivity, positive predictive value) of the four conditions was related to the presence of their associated conditions. Sensitivity increased with increasing number of diagnosis code. Impact of death on coding validity is minimal. Coding validity of conditions is closely related to its clinical importance and complexity of patients' case mix. We recommend mandatory coding of certain secondary diagnosis to meet the need of health research based on administrative health data.

Governance codes: facts or fictions? a study of governance codes in colombia1,2

Directory of Open Access Journals (Sweden)

Julián Benavides Franco

2010-10-01

Full Text Available This article studies the effects on accounting performance and financing decisions of Colombian firms after issuing a corporate governance code. We assemble a database of Colombian issuers and test the hypotheses of improved performance and higher leverage after issuing a code. The results show that the firms’ return on assets after the code introduction improves in excess of 1%; the effect is amplified by the code quality. Additionally, the firms leverage increased, in excess of 5%, when the code quality was factored into the analysis. These results suggest that controlling parties commitment to self restrain, by reducing their private benefits and/or the expropriation of non controlling parties, through the code introduction, is indeed an effective measure and that the financial markets agree, increasing the supply of funds to the firms.

Code, standard and specifications

International Nuclear Information System (INIS)

Abdul Nassir Ibrahim; Azali Muhammad; Ab. Razak Hamzah; Abd. Aziz Mohamed; Mohamad Pauzi Ismail

2008-01-01

Radiography also same as the other technique, it need standard. This standard was used widely and method of used it also regular. With that, radiography testing only practical based on regulations as mentioned and documented. These regulation or guideline documented in code, standard and specifications. In Malaysia, level one and basic radiographer can do radiography work based on instruction give by level two or three radiographer. This instruction was produced based on guideline that mention in document. Level two must follow the specifications mentioned in standard when write the instruction. From this scenario, it makes clearly that this radiography work is a type of work that everything must follow the rule. For the code, the radiography follow the code of American Society for Mechanical Engineer (ASME) and the only code that have in Malaysia for this time is rule that published by Atomic Energy Licensing Board (AELB) known as Practical code for radiation Protection in Industrial radiography. With the existence of this code, all the radiography must follow the rule or standard regulated automatically.

Purifying selection acts on coding and non-coding sequences of paralogous genes in Arabidopsis thaliana.

Science.gov (United States)

Hoffmann, Robert D; Palmgren, Michael

2016-06-13

Whole-genome duplications in the ancestors of many diverse species provided the genetic material for evolutionary novelty. Several models explain the retention of paralogous genes. However, how these models are reflected in the evolution of coding and non-coding sequences of paralogous genes is unknown. Here, we analyzed the coding and non-coding sequences of paralogous genes in Arabidopsis thaliana and compared these sequences with those of orthologous genes in Arabidopsis lyrata. Paralogs with lower expression than their duplicate had more nonsynonymous substitutions, were more likely to fractionate, and exhibited less similar expression patterns with their orthologs in the other species. Also, lower-expressed genes had greater tissue specificity. Orthologous conserved non-coding sequences in the promoters, introns, and 3' untranslated regions were less abundant at lower-expressed genes compared to their higher-expressed paralogs. A gene ontology (GO) term enrichment analysis showed that paralogs with similar expression levels were enriched in GO terms related to ribosomes, whereas paralogs with different expression levels were enriched in terms associated with stress responses. Loss of conserved non-coding sequences in one gene of a paralogous gene pair correlates with reduced expression levels that are more tissue specific. Together with increased mutation rates in the coding sequences, this suggests that similar forces of purifying selection act on coding and non-coding sequences. We propose that coding and non-coding sequences evolve concurrently following gene duplication.

Convolutional coding techniques for data protection

Science.gov (United States)

Massey, J. L.

1975-01-01

Results of research on the use of convolutional codes in data communications are presented. Convolutional coding fundamentals are discussed along with modulation and coding interaction. Concatenated coding systems and data compression with convolutional codes are described.

21 CFR 106.90 - Coding.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Coding. 106.90 Section 106.90 Food and Drugs FOOD... of Infant Formulas § 106.90 Coding. The manufacturer shall code all infant formulas in conformity with the coding requirements that are applicable to thermally processed low-acid foods packaged in...

User Instructions for the CiderF Individual Dose Code and Associated Utility Codes

Energy Technology Data Exchange (ETDEWEB)

Eslinger, Paul W.; Napier, Bruce A.

2013-08-30

Historical activities at facilities producing nuclear materials for weapons released radioactivity into the air and water. Past studies in the United States have evaluated the release, atmospheric transport and environmental accumulation of 131I from the nuclear facilities at Hanford in Washington State and the resulting dose to members of the public (Farris et al. 1994). A multi-year dose reconstruction effort (Mokrov et al. 2004) is also being conducted to produce representative dose estimates for members of the public living near Mayak, Russia, from atmospheric releases of 131I at the facilities of the Mayak Production Association. The approach to calculating individual doses to members of the public from historical releases of airborne 131I has the following general steps: • Construct estimates of releases 131I to the air from production facilities. • Model the transport of 131I in the air and subsequent deposition on the ground and vegetation. • Model the accumulation of 131I in soil, water and food products (environmental media). • Calculate the dose for an individual by matching the appropriate lifestyle and consumption data for the individual to the concentrations of 131I in environmental media at their residence location. A number of computer codes were developed to facilitate the study of airborne 131I emissions at Hanford. The RATCHET code modeled movement of 131I in the atmosphere (Ramsdell Jr. et al. 1994). The DECARTES code modeled accumulation of 131I in environmental media (Miley et al. 1994). The CIDER computer code estimated annual doses to individuals (Eslinger et al. 1994) using the equations and parameters specific to Hanford (Snyder et al. 1994). Several of the computer codes developed to model 131I releases from Hanford are general enough to be used for other facilities. This document provides user instructions for computer codes calculating doses to members of the public from atmospheric 131I that have two major differences from the

Coding In-depth Semistructured Interviews

DEFF Research Database (Denmark)

Campbell, John L.; Quincy, Charles; Osserman, Jordan

2013-01-01

Many social science studies are based on coded in-depth semistructured interview transcripts. But researchers rarely report or discuss coding reliability in this work. Nor is there much literature on the subject for this type of data. This article presents a procedure for developing coding schemes...... useful for situations where a single knowledgeable coder will code all the transcripts once the coding scheme has been established. This approach can also be used with other types of qualitative data and in other circumstances....

Polynomial weights and code constructions

DEFF Research Database (Denmark)

Massey, J; Costello, D; Justesen, Jørn

1973-01-01

polynomial included. This fundamental property is then used as the key to a variety of code constructions including 1) a simplified derivation of the binary Reed-Muller codes and, for any primepgreater than 2, a new extensive class ofp-ary "Reed-Muller codes," 2) a new class of "repeated-root" cyclic codes...... of long constraint length binary convolutional codes derived from2^r-ary Reed-Solomon codes, and 6) a new class ofq-ary "repeated-root" constacyclic codes with an algebraic decoding algorithm.......For any nonzero elementcof a general finite fieldGF(q), it is shown that the polynomials(x - c)^i, i = 0,1,2,cdots, have the "weight-retaining" property that any linear combination of these polynomials with coefficients inGF(q)has Hamming weight at least as great as that of the minimum degree...

QUIC: a chemical kinetics code for use with the chemical equilibrium code QUIL

International Nuclear Information System (INIS)

Lunsford, J.L.

1977-10-01

A chemical rate kinetics code QUIC is described, along with a support code RATE. QUIC is designed to allow chemical kinetics calculations on a wide variety of chemical environments while operating in the overlay environment of the chemical equilibrium code QUIL. QUIC depends upon a rate-data library called LIBR. This library is maintained by RATE. RATE enters into the library all reactions in a standardized format. The code QUIC, operating in conjunction with QUIL, is interactive and written to be used from a remote terminal, with paging control provided. Plotted output is also available

Polynomial theory of error correcting codes

CERN Document Server

Cancellieri, Giovanni

2015-01-01

The book offers an original view on channel coding, based on a unitary approach to block and convolutional codes for error correction. It presents both new concepts and new families of codes. For example, lengthened and modified lengthened cyclic codes are introduced as a bridge towards time-invariant convolutional codes and their extension to time-varying versions. The novel families of codes include turbo codes and low-density parity check (LDPC) codes, the features of which are justified from the structural properties of the component codes. Design procedures for regular LDPC codes are proposed, supported by the presented theory. Quasi-cyclic LDPC codes, in block or convolutional form, represent one of the most original contributions of the book. The use of more than 100 examples allows the reader gradually to gain an understanding of the theory, and the provision of a list of more than 150 definitions, indexed at the end of the book, permits rapid location of sought information.

Thrombosis, systemic and cardiac oxidative stress and DNA damage induced by pulmonary exposure to diesel exhaust particles, and the effect of nootkatone thereon.

Science.gov (United States)

Nemmar, Abderrahim; Al-Salam, Suhail; Beegam, Sumaya; Yuvaraju, Priya; Ali, Badreldin H

2018-01-05

Adverse cardiovascular effects of particulate air pollution persist even at lower concentrations than those of the current air quality limit. Therefore, identification of safe and effective measures against particles-induced cardiovascular toxicity is needed. Nootkatone is a sesquiterpenoid in grapefruit with diverse bioactivities including anti-inflammatory and antioxidant effects. However, its protective effect on the cardiovascular injury induced by diesel exhaust particles (DEP) has not been studied before. We assessed the possible protective effect of nootkatone (90 mg/kg) administered by gavage 1h before intratracheal (i.t.) instillation of DEP (30 μg/mouse). Twenty-four h following the i.t. administration of DEP various thrombotic and cardiac parameters were assessed. Nootkatone inhibited the prothrombotic effect induced by DEP in pial arterioles and venules in vivo and platelet aggregation in whole blood in vitro. Also, nootkatone prevented the shortening of activated partial thromboplastin time and prothrombin time induced by DEP. Nootkatone inhibited the increase of plasma concentration of fibrinogen, plasminogen activator inhibitor-1, interleukin-6 and lipid peroxidation induced by DEP. Immunohistochemically, hearts showed an analogous increase in glutathione and nuclear factor erythroid-derived 2-like 2 (Nrf2) expression by cardiac myocytes and endothelial cells following DEP exposure, and these effects were enhanced in mice treated with nootkatone+DEP. Likewise, heme oxygenase-1 (HO-1) was increased in mice treated with nootkatone+DEP compared with those treated with DEP or nootkatone+saline. The DNA damage caused by DEP was prevented by nootkatoone pretreatment. In conclusion, nootkatoone alleviates DEP-induced thrombogenicity and systemic and cardiac oxidative stress and DNA damage, at least partly, through Nrf2 and HO-1 activation.

Direct-semidirect (DSD) codes

International Nuclear Information System (INIS)

Cvelbar, F.

1999-01-01

Recent codes for direct-semidirect (DSD) model calculations in the form of answers to a detailed questionnaire are reviewed. These codes include those embodying the classical DSD approach covering only the transitions to the bound states (RAF, HIKARI, and those of the Bologna group), as well as the code CUPIDO++ that also treats transitions to unbound states. (author)

Polar Coding for the Large Hadron Collider: Challenges in Code Concatenation

CERN Document Server

AUTHOR|(CDS)2238544; Podzorny, Tomasz; Uythoven, Jan

2018-01-01

In this work, we present a concatenated repetition-polar coding scheme that is aimed at applications requiring highly unbalanced unequal bit-error protection, such as the Beam Interlock System of the Large Hadron Collider at CERN. Even though this concatenation scheme is simple, it reveals significant challenges that may be encountered when designing a concatenated scheme that uses a polar code as an inner code, such as error correlation and unusual decision log-likelihood ratio distributions. We explain and analyze these challenges and we propose two ways to overcome them.

Coaxial atomic force microscope probes for dielectrophoresis of DNA under different buffer conditions

Science.gov (United States)

Tao, Yinglei; Kumar Wickramasinghe, H.

2017-02-01

We demonstrate a coaxial AFM nanoprobe device for dielectrophoretic (DEP) trapping of DNA molecules in Tris-EDTA (TE) and phosphate-buffered saline (PBS) buffers. The DEP properties of 20 nm polystyrene beads were studied with coaxial probes in media with different conductivities. Due to the special geometry of our DEP probe device, sufficiently high electric fields were generated at the probe end to focus DNA molecules with positive DEP. DEP trapping for both polystyrene beads and DNA molecules was quantitatively analyzed over the frequency range from 100 kHz to 50 MHz and compared with the Clausius-Mossotti theory. Finally, we discussed the negative effect of medium salinity during DEP trapping.

Protograph-Based Raptor-Like Codes

Science.gov (United States)

Divsalar, Dariush; Chen, Tsung-Yi; Wang, Jiadong; Wesel, Richard D.

2014-01-01

Theoretical analysis has long indicated that feedback improves the error exponent but not the capacity of pointto- point memoryless channels. The analytic and empirical results indicate that at short blocklength regime, practical rate-compatible punctured convolutional (RCPC) codes achieve low latency with the use of noiseless feedback. In 3GPP, standard rate-compatible turbo codes (RCPT) did not outperform the convolutional codes in the short blocklength regime. The reason is the convolutional codes for low number of states can be decoded optimally using Viterbi decoder. Despite excellent performance of convolutional codes at very short blocklengths, the strength of convolutional codes does not scale with the blocklength for a fixed number of states in its trellis.

Construction and decoding of matrix-product codes from nested codes

DEFF Research Database (Denmark)

Hernando, Fernando; Lally, Kristine; Ruano, Diego

2009-01-01

We consider matrix-product codes [C1 ... Cs] · A, where C1, ..., Cs  are nested linear codes and matrix A has full rank. We compute their minimum distance and provide a decoding algorithm when A is a non-singular by columns matrix. The decoding algorithm decodes up to half of the minimum distance....

Bring out your codes! Bring out your codes! (Increasing Software Visibility and Re-use)

Science.gov (United States)

Allen, A.; Berriman, B.; Brunner, R.; Burger, D.; DuPrie, K.; Hanisch, R. J.; Mann, R.; Mink, J.; Sandin, C.; Shortridge, K.; Teuben, P.

2013-10-01

Progress is being made in code discoverability and preservation, but as discussed at ADASS XXI, many codes still remain hidden from public view. With the Astrophysics Source Code Library (ASCL) now indexed by the SAO/NASA Astrophysics Data System (ADS), the introduction of a new journal, Astronomy & Computing, focused on astrophysics software, and the increasing success of education efforts such as Software Carpentry and SciCoder, the community has the opportunity to set a higher standard for its science by encouraging the release of software for examination and possible reuse. We assembled representatives of the community to present issues inhibiting code release and sought suggestions for tackling these factors. The session began with brief statements by panelists; the floor was then opened for discussion and ideas. Comments covered a diverse range of related topics and points of view, with apparent support for the propositions that algorithms should be readily available, code used to produce published scientific results should be made available, and there should be discovery mechanisms to allow these to be found easily. With increased use of resources such as GitHub (for code availability), ASCL (for code discovery), and a stated strong preference from the new journal Astronomy & Computing for code release, we expect to see additional progress over the next few years.

Optimal, Reliability-Based Code Calibration

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard

2002-01-01

Reliability based code calibration is considered in this paper. It is described how the results of FORM based reliability analysis may be related to the partial safety factors and characteristic values. The code calibration problem is presented in a decision theoretical form and it is discussed how...... of reliability based code calibration of LRFD based design codes....

The reason for having a code of pharmaceutical ethics: Spanish Pharmacists Code of Ethics

Directory of Open Access Journals (Sweden)

Ana Mulet Alberola

2017-05-01

Full Text Available The pharmacist profession needs its own code of conduct set out in writing to serve as a stimulus to pharmacists in their day-to-day work in the different areas of pharmacy, in conjunction always with each individual pharmacist´s personal commitment to their patients, to other healthcare professionals and to society. An overview is provided of the different codes of ethics for pharmacists on the national and international scale, the most up-to-date code for 2015 being presented as a set of principles which must guide a pharmacutical conduct from the standpoint of deliberative judgment. The difference between codes of ethics and codes of practice is discussed. In the era of massive-scale collaboration, this code is a project holding bright prospects for the future. Each individual pharmacutical attitude in practicing their profession must be identified with the pursuit of excellence in their own personal practice for the purpose of achieving the ethical and professional values above and beyond complying with regulations and code of practice.

Usage of burnt fuel isotopic compositions from engineering codes in Monte-Carlo code calculations

International Nuclear Information System (INIS)

Aleshin, Sergey S.; Gorodkov, Sergey S.; Shcherenko, Anna I.

2015-01-01

A burn-up calculation of VVER's cores by Monte-Carlo code is complex process and requires large computational costs. This fact makes Monte-Carlo codes usage complicated for project and operating calculations. Previously prepared isotopic compositions are proposed to use for the Monte-Carlo code (MCU) calculations of different states of VVER's core with burnt fuel. Isotopic compositions are proposed to calculate by an approximation method. The approximation method is based on usage of a spectral functionality and reference isotopic compositions, that are calculated by engineering codes (TVS-M, PERMAK-A). The multiplication factors and power distributions of FA and VVER with infinite height are calculated in this work by the Monte-Carlo code MCU using earlier prepared isotopic compositions. The MCU calculation data were compared with the data which were obtained by engineering codes.

An analytical demonstration of coupling schemes between magnetohydrodynamic codes and eddy current codes

International Nuclear Information System (INIS)

Liu Yueqiang; Albanese, R.; Rubinacci, G.; Portone, A.; Villone, F.

2008-01-01

In order to model a magnetohydrodynamic (MHD) instability that strongly couples to external conducting structures (walls and/or coils) in a fusion device, it is often necessary to combine a MHD code solving for the plasma response, with an eddy current code computing the fields and currents of conductors. We present a rigorous proof of the coupling schemes between these two types of codes. One of the coupling schemes has been introduced and implemented in the CARMA code [R. Albanese, Y. Q. Liu, A. Portone, G. Rubinacci, and F. Villone, IEEE Trans. Magn. 44, 1654 (2008); A. Portone, F. Villone, Y. Q. Liu, R. Albanese, and G. Rubinacci, Plasma Phys. Controlled Fusion 50, 085004 (2008)] that couples the MHD code MARS-F[Y. Q. Liu, A. Bondeson, C. M. Fransson, B. Lennartson, and C. Breitholtz, Phys. Plasmas 7, 3681 (2000)] and the eddy current code CARIDDI[R. Albanese and G. Rubinacci, Adv. Imaging Electron Phys. 102, 1 (1998)]. While the coupling schemes are described for a general toroidal geometry, we give the analytical proof for a cylindrical plasma.

Preliminary investigation study of code of developed country for developing Korean fuel cycle code

International Nuclear Information System (INIS)

Jeong, Chang Joon; Ko, Won Il; Lee, Ho Hee; Cho, Dong Keun; Park, Chang Je

2012-01-01

In order to develop Korean fuel cycle code, the analyses has been performed with the fuel cycle codes which are used in advanced country. Also, recommendations were proposed for future development. The fuel cycle codes are AS FLOOWS: VISTA which has been developed by IAEA, DANESS code which developed by ANL and LISTO, and VISION developed by INL for the Advanced Fuel Cycle Initiative (AFCI) system analysis. The recommended items were proposed for software, program scheme, material flow model, isotope decay model, environmental impact analysis model, and economics analysis model. The described things will be used for development of Korean nuclear fuel cycle code in future

The Coding Process and Its Challenges

Directory of Open Access Journals (Sweden)

Judith A. Holton, Ph.D.

2010-02-01

Full Text Available Coding is the core process in classic grounded theory methodology. It is through coding that the conceptual abstraction of data and its reintegration as theory takes place. There are two types of coding in a classic grounded theory study: substantive coding, which includes both open and selective coding procedures, and theoretical coding. In substantive coding, the researcher works with the data directly, fracturing and analysing it, initially through open coding for the emergence of a core category and related concepts and then subsequently through theoretical sampling and selective coding of data to theoretically saturate the core and related concepts. Theoretical saturation is achieved through constant comparison of incidents (indicators in the data to elicit the properties and dimensions of each category (code. This constant comparing of incidents continues until the process yields the interchangeability of indicators, meaning that no new properties or dimensions are emerging from continued coding and comparison. At this point, the concepts have achieved theoretical saturation and the theorist shifts attention to exploring the emergent fit of potential theoretical codes that enable the conceptual integration of the core and related concepts to produce hypotheses that account for relationships between the concepts thereby explaining the latent pattern of social behaviour that forms the basis of the emergent theory. The coding of data in grounded theory occurs in conjunction with analysis through a process of conceptual memoing, capturing the theorist’s ideation of the emerging theory. Memoing occurs initially at the substantive coding level and proceeds to higher levels of conceptual abstraction as coding proceeds to theoretical saturation and the theorist begins to explore conceptual reintegration through theoretical coding.

Development of new two-dimensional spectral/spatial code based on dynamic cyclic shift code for OCDMA system

Science.gov (United States)

Jellali, Nabiha; Najjar, Monia; Ferchichi, Moez; Rezig, Houria

2017-07-01

In this paper, a new two-dimensional spectral/spatial codes family, named two dimensional dynamic cyclic shift codes (2D-DCS) is introduced. The 2D-DCS codes are derived from the dynamic cyclic shift code for the spectral and spatial coding. The proposed system can fully eliminate the multiple access interference (MAI) by using the MAI cancellation property. The effect of shot noise, phase-induced intensity noise and thermal noise are used to analyze the code performance. In comparison with existing two dimensional (2D) codes, such as 2D perfect difference (2D-PD), 2D Extended Enhanced Double Weight (2D-Extended-EDW) and 2D hybrid (2D-FCC/MDW) codes, the numerical results show that our proposed codes have the best performance. By keeping the same code length and increasing the spatial code, the performance of our 2D-DCS system is enhanced: it provides higher data rates while using lower transmitted power and a smaller spectral width.

The Code of Ethics and Editorial Code of Practice of the Royal Astronomical Society

Science.gov (United States)

Murdin, Paul

2013-01-01

Whilst the Royal Astronomical Society has got by for more than 100 years without a written code of ethics, modern standards of governance suggested that such a code could be useful in the resolution of disputes. In 2005, the RAS adopted the Universal Code of Ethics for Science that had been formulated by the Royal Society of London. At the same time and for similar reasons the RAS adopted an Editorial Code of Practice.

Protective Effects of N-Acetyl Cysteine against Diesel Exhaust Particles-Induced Intracellular ROS Generates Pro-Inflammatory Cytokines to Mediate the Vascular Permeability of Capillary-Like Endothelial Tubes

Science.gov (United States)

Tseng, Chia-Yi; Chang, Jing-Fen; Wang, Jhih-Syuan; Chang, Yu-Jung; Gordon, Marion K.; Chao, Ming-Wei

2015-01-01

Exposure to diesel exhaust particles (DEP) is associated with pulmonary and cardiovascular diseases. Previous studies using in vitro endothelial tubes as a simplified model of capillaries have found that DEP-induced ROS increase vascular permeability with rearrangement or internalization of adherens junctional VE-cadherin away from the plasma membrane. This allows DEPs to penetrate into the cell and capillary lumen. In addition, pro-inflammatory cytokines are up-regulated and mediate vascular permeability in response to DEP. However, the mechanisms through which these DEP-induced pro-inflammatory cytokines increase vascular permeability remain unknown. Hence, we examined the ability of DEP to induce permeability of human umbilical vein endothelial cell tube cells to investigate these mechanisms. Furthermore, supplementation with NAC reduces ROS production following exposure to DEP. HUVEC tube cells contributed to a pro-inflammatory response to DEP-induced intracellular ROS generation. Endothelial oxidative stress induced the release of TNF-α and IL-6 from tube cells, subsequently stimulating the secretion of VEGF-A independent of HO-1. Our data suggests that DEP-induced intracellular ROS and release of the pro-inflammatory cytokines TNF- α and IL-6, which would contribute to VEGF-A secretion and disrupt cell-cell borders and increase vasculature permeability. Addition of NAC suppresses DEP-induced ROS efficiently and reduces subsequent damages by increasing endogenous glutathione. PMID:26148005

Protective Effects of N-Acetyl Cysteine against Diesel Exhaust Particles-Induced Intracellular ROS Generates Pro-Inflammatory Cytokines to Mediate the Vascular Permeability of Capillary-Like Endothelial Tubes.

Directory of Open Access Journals (Sweden)

Chia-Yi Tseng

Full Text Available Exposure to diesel exhaust particles (DEP is associated with pulmonary and cardiovascular diseases. Previous studies using in vitro endothelial tubes as a simplified model of capillaries have found that DEP-induced ROS increase vascular permeability with rearrangement or internalization of adherens junctional VE-cadherin away from the plasma membrane. This allows DEPs to penetrate into the cell and capillary lumen. In addition, pro-inflammatory cytokines are up-regulated and mediate vascular permeability in response to DEP. However, the mechanisms through which these DEP-induced pro-inflammatory cytokines increase vascular permeability remain unknown. Hence, we examined the ability of DEP to induce permeability of human umbilical vein endothelial cell tube cells to investigate these mechanisms. Furthermore, supplementation with NAC reduces ROS production following exposure to DEP. HUVEC tube cells contributed to a pro-inflammatory response to DEP-induced intracellular ROS generation. Endothelial oxidative stress induced the release of TNF-α and IL-6 from tube cells, subsequently stimulating the secretion of VEGF-A independent of HO-1. Our data suggests that DEP-induced intracellular ROS and release of the pro-inflammatory cytokines TNF- α and IL-6, which would contribute to VEGF-A secretion and disrupt cell-cell borders and increase vasculature permeability. Addition of NAC suppresses DEP-induced ROS efficiently and reduces subsequent damages by increasing endogenous glutathione.

Facial expression coding in children and adolescents with autism: Reduced adaptability but intact norm-based coding.

Science.gov (United States)

Rhodes, Gillian; Burton, Nichola; Jeffery, Linda; Read, Ainsley; Taylor, Libby; Ewing, Louise

2018-05-01

Individuals with autism spectrum disorder (ASD) can have difficulty recognizing emotional expressions. Here, we asked whether the underlying perceptual coding of expression is disrupted. Typical individuals code expression relative to a perceptual (average) norm that is continuously updated by experience. This adaptability of face-coding mechanisms has been linked to performance on various face tasks. We used an adaptation aftereffect paradigm to characterize expression coding in children and adolescents with autism. We asked whether face expression coding is less adaptable in autism and whether there is any fundamental disruption of norm-based coding. If expression coding is norm-based, then the face aftereffects should increase with adaptor expression strength (distance from the average expression). We observed this pattern in both autistic and typically developing participants, suggesting that norm-based coding is fundamentally intact in autism. Critically, however, expression aftereffects were reduced in the autism group, indicating that expression-coding mechanisms are less readily tuned by experience. Reduced adaptability has also been reported for coding of face identity and gaze direction. Thus, there appears to be a pervasive lack of adaptability in face-coding mechanisms in autism, which could contribute to face processing and broader social difficulties in the disorder. © 2017 The British Psychological Society.

Generalized optical code construction for enhanced and Modified Double Weight like codes without mapping for SAC-OCDMA systems

Science.gov (United States)

Kumawat, Soma; Ravi Kumar, M.

2016-07-01

Double Weight (DW) code family is one of the coding schemes proposed for Spectral Amplitude Coding-Optical Code Division Multiple Access (SAC-OCDMA) systems. Modified Double Weight (MDW) code for even weights and Enhanced Double Weight (EDW) code for odd weights are two algorithms extending the use of DW code for SAC-OCDMA systems. The above mentioned codes use mapping technique to provide codes for higher number of users. A new generalized algorithm to construct EDW and MDW like codes without mapping for any weight greater than 2 is proposed. A single code construction algorithm gives same length increment, Bit Error Rate (BER) calculation and other properties for all weights greater than 2. Algorithm first constructs a generalized basic matrix which is repeated in a different way to produce the codes for all users (different from mapping). The generalized code is analysed for BER using balanced detection and direct detection techniques.

Error Correcting Codes

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 2; Issue 3. Error Correcting Codes - Reed Solomon Codes. Priti Shankar. Series Article Volume 2 Issue 3 March ... Author Affiliations. Priti Shankar1. Department of Computer Science and Automation, Indian Institute of Science, Bangalore 560 012, India ...

Neutron cross section library production code system for continuous energy Monte Carlo code MVP. LICEM

International Nuclear Information System (INIS)

Mori, Takamasa; Nakagawa, Masayuki; Kaneko, Kunio.

1996-05-01

A code system has been developed to produce neutron cross section libraries for the MVP continuous energy Monte Carlo code from an evaluated nuclear data library in the ENDF format. The code system consists of 9 computer codes, and can process nuclear data in the latest ENDF-6 format. By using the present system, MVP neutron cross section libraries for important nuclides in reactor core analyses, shielding and fusion neutronics calculations have been prepared from JENDL-3.1, JENDL-3.2, JENDL-FUSION file and ENDF/B-VI data bases. This report describes the format of MVP neutron cross section library, the details of each code in the code system and how to use them. (author)

Development of authentication code for multi-access optical code division multiplexing based quantum key distribution

Science.gov (United States)

Taiwo, Ambali; Alnassar, Ghusoon; Bakar, M. H. Abu; Khir, M. F. Abdul; Mahdi, Mohd Adzir; Mokhtar, M.

2018-05-01

One-weight authentication code for multi-user quantum key distribution (QKD) is proposed. The code is developed for Optical Code Division Multiplexing (OCDMA) based QKD network. A unique address assigned to individual user, coupled with degrading probability of predicting the source of the qubit transmitted in the channel offer excellent secure mechanism against any form of channel attack on OCDMA based QKD network. Flexibility in design as well as ease of modifying the number of users are equally exceptional quality presented by the code in contrast to Optical Orthogonal Code (OOC) earlier implemented for the same purpose. The code was successfully applied to eight simultaneous users at effective key rate of 32 bps over 27 km transmission distance.

Neutron cross section library production code system for continuous energy Monte Carlo code MVP. LICEM

Energy Technology Data Exchange (ETDEWEB)

Mori, Takamasa; Nakagawa, Masayuki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Kaneko, Kunio

1996-05-01

A code system has been developed to produce neutron cross section libraries for the MVP continuous energy Monte Carlo code from an evaluated nuclear data library in the ENDF format. The code system consists of 9 computer codes, and can process nuclear data in the latest ENDF-6 format. By using the present system, MVP neutron cross section libraries for important nuclides in reactor core analyses, shielding and fusion neutronics calculations have been prepared from JENDL-3.1, JENDL-3.2, JENDL-FUSION file and ENDF/B-VI data bases. This report describes the format of MVP neutron cross section library, the details of each code in the code system and how to use them. (author).

Ready, steady… Code!

CERN Multimedia

Anaïs Schaeffer

2013-01-01

This summer, CERN took part in the Google Summer of Code programme for the third year in succession. Open to students from all over the world, this programme leads to very successful collaborations for open source software projects.   Image: GSoC 2013. Google Summer of Code (GSoC) is a global programme that offers student developers grants to write code for open-source software projects. Since its creation in 2005, the programme has brought together some 6,000 students from over 100 countries worldwide. The students selected by Google are paired with a mentor from one of the participating projects, which can be led by institutes, organisations, companies, etc. This year, CERN PH Department’s SFT (Software Development for Experiments) Group took part in the GSoC programme for the third time, submitting 15 open-source projects. “Once published on the Google Summer for Code website (in April), the projects are open to applications,” says Jakob Blomer, one of the o...

Radioactive action code

International Nuclear Information System (INIS)

Anon.

1988-01-01

A new coding system, 'Hazrad', for buildings and transportation containers for alerting emergency services personnel to the presence of radioactive materials has been developed in the United Kingdom. The hazards of materials in the buildings or transport container, together with the recommended emergency action, are represented by a number of codes which are marked on the building or container and interpreted from a chart carried as a pocket-size guide. Buildings would be marked with the familiar yellow 'radioactive' trefoil, the written information 'Radioactive materials' and a list of isotopes. Under this the 'Hazrad' code would be written - three symbols to denote the relative radioactive risk (low, medium or high), the biological risk (also low, medium or high) and the third showing the type of radiation emitted, alpha, beta or gamma. The response cards indicate appropriate measures to take, eg for a high biological risk, Bio3, the wearing of a gas-tight protection suit is advised. The code and its uses are explained. (U.K.)

Software information sorting code 'PLUTO-R'

International Nuclear Information System (INIS)

Tsunematsu, Toshihide; Naraoka, Kenitsu; Adachi, Masao; Takeda, Tatsuoki

1984-10-01

A software information sorting code PLUTO-R is developed as one of the supporting codes of the TRITON system for the fusion plasma analysis. The objective of the PLUTO-R code is to sort reference materials of the codes in the TRITON code system. The easiness in the registration of information is especially pursued. As experience and skill in the data registration are not required, this code is usable for construction of general small-scale information system. This report gives an overall description and the user's manual of the PLUTO-R code. (author)

Comparison of the binding of the irreversible monoamine oxidase tracers, [11C]clorgyline and [11C]l-deprenyl in brain and peripheral organs in humans

International Nuclear Information System (INIS)

Fowler, Joanna S.; Logan, Jean; Wang, Gene-Jack; Volkow, Nora D.; Telang, Frank; Ding Yushin; Shea, Colleen; Garza, Victor; Xu Youwen; Li Zizhong; Alexoff, David; Vaska, Paul; Ferrieri, Richard; Schlyer, David; Zhu Wei; John Gatley, S.

2004-01-01

The monoamine oxidase A and B (MAO A and B) radiotracers [ 11 C]clorgyline (CLG) and [ 11 C]L-deprenyl (DEP) and their deuterium labeled counterparts (CLG-D and DEP-D) were compared to determine whether their distribution and kinetics in humans are consistent with their physical, chemical and pharmacological properties and the reported ratios of MAO A:MAO B in post-mortem human tissues. Irreversible binding was consistently higher for DEP in brain, heart, kidneys and spleen but not lung where CLG >DEP and not in thyroid where there is no DEP binding. The generally higher DEP binding is consistent with its higher enzyme affinity and larger free fraction in plasma while differences in regional distribution for CLG and DEP in brain, heart, thyroid and lungs are consistent with different relative ratios of MAO A and B in humans

Quantum computing with Majorana fermion codes

Science.gov (United States)

Litinski, Daniel; von Oppen, Felix

2018-05-01

We establish a unified framework for Majorana-based fault-tolerant quantum computation with Majorana surface codes and Majorana color codes. All logical Clifford gates are implemented with zero-time overhead. This is done by introducing a protocol for Pauli product measurements with tetrons and hexons which only requires local 4-Majorana parity measurements. An analogous protocol is used in the fault-tolerant setting, where tetrons and hexons are replaced by Majorana surface code patches, and parity measurements are replaced by lattice surgery, still only requiring local few-Majorana parity measurements. To this end, we discuss twist defects in Majorana fermion surface codes and adapt the technique of twist-based lattice surgery to fermionic codes. Moreover, we propose a family of codes that we refer to as Majorana color codes, which are obtained by concatenating Majorana surface codes with small Majorana fermion codes. Majorana surface and color codes can be used to decrease the space overhead and stabilizer weight compared to their bosonic counterparts.

Epidermal growth factor receptor activation by diesel particles is mediated by tyrosine phosphatase inhibition

International Nuclear Information System (INIS)

Tal, Tamara L.; Bromberg, Philip A.; Kim, Yumee; Samet, James M.

2008-01-01

Exposure to particulate matter (PM) is associated with increased cardiopulmonary morbidity and mortality. Diesel exhaust particles (DEP) are a major component of ambient PM and may contribute to PM-induced pulmonary inflammation. Proinflammatory signaling is mediated by phosphorylation-dependent signaling pathways whose activation is opposed by the activity of protein tyrosine phosphatases (PTPases) which thereby function to maintain signaling quiescence. PTPases contain an invariant catalytic cysteine that is susceptible to electrophilic attack. DEP contain electrophilic oxy-organic compounds that may contribute to the oxidant effects of PM. Therefore, we hypothesized that exposure to DEP impairs PTPase activity allowing for unopposed basal kinase activity. Here we report that exposure to 30 μg/cm 2 DEP for 4 h induces differential activation of signaling in primary cultures of human airway epithelial cells (HAEC), a primary target cell in PM inhalation. In-gel kinase activity assay of HAEC exposed to DEPs of low (L-DEP), intermediate (I-DEP) or high (H-DEP) organic content showed differential activation of intracellular kinases. Exposure to these DEP also induced varying levels of phosphorylation of the receptor tyrosine kinase EGFR in a manner that requires EGFR kinase activity but does not involve receptor dimerization. We demonstrate that treatment with DEP results in an impairment of total and EGFR-directed PTPase activity in HAEC with a potency that is independent of the organic content of these particles. These data show that DEP-induced EGFR phosphorylation in HAEC is the result of a loss of PTPase activities which normally function to dephosphorylate EGFR in opposition to baseline EGFR kinase activity

Acute sleep deprivation enhances post-infection sleep and promotes survival during bacterial infection in Drosophila.

Science.gov (United States)

Kuo, Tzu-Hsing; Williams, Julie A

2014-05-01

Sleep is known to increase as an acute response to infection. However, the function of this behavioral response in host defense is not well understood. To address this problem, we evaluated the effect of acute sleep deprivation on post-infection sleep and immune function in Drosophila. Laboratory. Drosophila melanogaster. Flies were subjected to sleep deprivation before (early DEP) or after (late DEP) bacterial infection. Relative to a non-deprived control, flies subjected to early DEP had enhanced sleep after infection as well as increased bacterial clearance and survival outcome. Flies subjected to late DEP experienced enhanced sleep following the deprivation period, and showed a modest improvement in survival outcome. Continuous DEP (early and late DEP) throughout infection also enhanced sleep later during infection and improved survival. However, improved survival in flies subjected to late or continuous DEP did not occur until after flies had experienced sleep. During infection, both early and late DEP enhanced NFκB transcriptional activity as measured by a luciferase reporter (κB-luc) in living flies. Early DEP also increased NFκB activity prior to infection. Flies that were deficient in expression of either the Relish or Dif NFκB transcription factors showed normal responses to early DEP. However, the effect of early DEP on post-infection sleep and survival was abolished in double mutants, which indicates that Relish and Dif have redundant roles in this process. Acute sleep deprivation elevated NFκB-dependent activity, increased post-infection sleep, and improved survival during bacterial infection.

Genetic Code Analysis Toolkit: A novel tool to explore the coding properties of the genetic code and DNA sequences

Science.gov (United States)

Kraljić, K.; Strüngmann, L.; Fimmel, E.; Gumbel, M.

2018-01-01

The genetic code is degenerated and it is assumed that redundancy provides error detection and correction mechanisms in the translation process. However, the biological meaning of the code's structure is still under current research. This paper presents a Genetic Code Analysis Toolkit (GCAT) which provides workflows and algorithms for the analysis of the structure of nucleotide sequences. In particular, sets or sequences of codons can be transformed and tested for circularity, comma-freeness, dichotomic partitions and others. GCAT comes with a fertile editor custom-built to work with the genetic code and a batch mode for multi-sequence processing. With the ability to read FASTA files or load sequences from GenBank, the tool can be used for the mathematical and statistical analysis of existing sequence data. GCAT is Java-based and provides a plug-in concept for extensibility. Availability: Open source Homepage:http://www.gcat.bio/

QC-LDPC code-based cryptography

CERN Document Server

Baldi, Marco

2014-01-01

This book describes the fundamentals of cryptographic primitives based on quasi-cyclic low-density parity-check (QC-LDPC) codes, with a special focus on the use of these codes in public-key cryptosystems derived from the McEliece and Niederreiter schemes. In the first part of the book, the main characteristics of QC-LDPC codes are reviewed, and several techniques for their design are presented, while tools for assessing the error correction performance of these codes are also described. Some families of QC-LDPC codes that are best suited for use in cryptography are also presented. The second part of the book focuses on the McEliece and Niederreiter cryptosystems, both in their original forms and in some subsequent variants. The applicability of QC-LDPC codes in these frameworks is investigated by means of theoretical analyses and numerical tools, in order to assess their benefits and drawbacks in terms of system efficiency and security. Several examples of QC-LDPC code-based public key cryptosystems are prese...

Stability analysis by ERATO code

International Nuclear Information System (INIS)

Tsunematsu, Toshihide; Takeda, Tatsuoki; Matsuura, Toshihiko; Azumi, Masafumi; Kurita, Gen-ichi

1979-12-01

Problems in MHD stability calculations by ERATO code are described; which concern convergence property of results, equilibrium codes, and machine optimization of ERATO code. It is concluded that irregularity on a convergence curve is not due to a fault of the ERATO code itself but due to inappropriate choice of the equilibrium calculation meshes. Also described are a code to calculate an equilibrium as a quasi-inverse problem and a code to calculate an equilibrium as a result of a transport process. Optimization of the code with respect to I/O operations reduced both CPU time and I/O time considerably. With the FACOM230-75 APU/CPU multiprocessor system, the performance is about 6 times as high as with the FACOM230-75 CPU, showing the effectiveness of a vector processing computer for the kind of MHD computations. This report is a summary of the material presented at the ERATO workshop 1979(ORNL), supplemented with some details. (author)

Elements of algebraic coding systems

CERN Document Server

Cardoso da Rocha, Jr, Valdemar

2014-01-01

Elements of Algebraic Coding Systems is an introductory text to algebraic coding theory. In the first chapter, you'll gain inside knowledge of coding fundamentals, which is essential for a deeper understanding of state-of-the-art coding systems. This book is a quick reference for those who are unfamiliar with this topic, as well as for use with specific applications such as cryptography and communication. Linear error-correcting block codes through elementary principles span eleven chapters of the text. Cyclic codes, some finite field algebra, Goppa codes, algebraic decoding algorithms, and applications in public-key cryptography and secret-key cryptography are discussed, including problems and solutions at the end of each chapter. Three appendices cover the Gilbert bound and some related derivations, a derivation of the Mac- Williams' identities based on the probability of undetected error, and two important tools for algebraic decoding-namely, the finite field Fourier transform and the Euclidean algorithm f...

QR codes for dummies

CERN Document Server

Waters, Joe

2012-01-01

Find out how to effectively create, use, and track QR codes QR (Quick Response) codes are popping up everywhere, and businesses are reaping the rewards. Get in on the action with the no-nonsense advice in this streamlined, portable guide. You'll find out how to get started, plan your strategy, and actually create the codes. Then you'll learn to link codes to mobile-friendly content, track your results, and develop ways to give your customers value that will keep them coming back. It's all presented in the straightforward style you've come to know and love, with a dash of humor thrown

LFSC - Linac Feedback Simulation Code

Energy Technology Data Exchange (ETDEWEB)

Ivanov, Valentin; /Fermilab

2008-05-01

The computer program LFSC (Code>) is a numerical tool for simulation beam based feedback in high performance linacs. The code LFSC is based on the earlier version developed by a collective of authors at SLAC (L.Hendrickson, R. McEwen, T. Himel, H. Shoaee, S. Shah, P. Emma, P. Schultz) during 1990-2005. That code was successively used in simulation of SLC, TESLA, CLIC and NLC projects. It can simulate as pulse-to-pulse feedback on timescale corresponding to 5-100 Hz, as slower feedbacks, operating in the 0.1-1 Hz range in the Main Linac and Beam Delivery System. The code LFSC is running under Matlab for MS Windows operating system. It contains about 30,000 lines of source code in more than 260 subroutines. The code uses the LIAR ('Linear Accelerator Research code') for particle tracking under ground motion and technical noise perturbations. It uses the Guinea Pig code to simulate the luminosity performance. A set of input files includes the lattice description (XSIF format), and plane text files with numerical parameters, wake fields, ground motion data etc. The Matlab environment provides a flexible system for graphical output.

Office of Codes and Standards resource book. Section 1, Building energy codes and standards

Energy Technology Data Exchange (ETDEWEB)

Hattrup, M.P.

1995-01-01

The US Department of Energy`s (DOE`s) Office of Codes and Standards has developed this Resource Book to provide: A discussion of DOE involvement in building codes and standards; a current and accurate set of descriptions of residential, commercial, and Federal building codes and standards; information on State contacts, State code status, State building construction unit volume, and State needs; and a list of stakeholders in the building energy codes and standards arena. The Resource Book is considered an evolving document and will be updated occasionally. Users are requested to submit additional data (e.g., more current, widely accepted, and/or documented data) and suggested changes to the address listed below. Please provide sources for all data provided.

Development and Application of a Code for Internal Exposure (CINEX) based on the CINDY code

International Nuclear Information System (INIS)

Kravchik, T.; Duchan, N.; Sarah, R.; Gabay, Y.; Kol, R.

2004-01-01

Internal exposure to radioactive materials at the NRCN is evaluated using the CINDY (Code for Internal Dosimetry) Package. The code was developed by the Pacific Northwest Laboratory to assist the interpretation of bioassay data, provide bioassay projections and evaluate committed and calendar-year doses from intake or bioassay measurement data. It provides capabilities to calculate organ dose and effective dose equivalents using the International Commission on Radiological Protection (ICRP) 30 approach. The CINDY code operates under DOS operating system and consequently its operation needs a relatively long procedure which also includes a lot of manual typing that can lead to personal human mistakes. A new code has been developed at the NRCN, the CINEX (Code for Internal Exposure), which is an Excel application and leads to a significant reduction in calculation time (in the order of 5-10 times) and in the risk of personal human mistakes. The code uses a database containing tables which were constructed by the CINDY and contain the bioassay values predicted by the ICRP30 model after an intake of an activity unit of each isotope. Using the database, the code than calculates the appropriate intake and consequently the committed effective dose and organ dose. Calculations with the CINEX code were compared to similar calculations with the CINDY code. The discrepancies were less than 5%, which is the rounding error of the CINDY code. Attached is a table which compares parameters calculated with the CINEX and the CINDY codes (for a class Y uranium). The CINEX is now used at the NRCN to calculate occupational intakes and doses to workers with radioactive materials

Cloning and characterization of rat density-enhanced phosphatase-1, a protein tyrosine phosphatase expressed by vascular cells.

Science.gov (United States)

Borges, L G; Seifert, R A; Grant, F J; Hart, C E; Disteche, C M; Edelhoff, S; Solca, F F; Lieberman, M A; Lindner, V; Fischer, E H; Lok, S; Bowen-Pope, D F

1996-09-01

We have cloned from cultured vascular smooth muscle cells a protein tyrosine phosphatase, rat density-enhanced phosphatase-1 (rDEP-1), which is a probable rat homologue of DEP-1/HPTP eta. rDEP-1 is encoded by an 8.7-kb transcript and is expressed as a 180- to 220-kD protein. The rDEP-1 gene is located on human chromosome 11 (region p11.2) and on mouse chromosome 2 (region 2E). The cDNA sequence predicts a transmembrane protein consisting of a single phosphatase catalytic domain in the intracellular region, a single transmembrane domain, and eight fibronectin type III repeats in the extracellular region (GenBank accession number U40790). In situ hybridization analysis demonstrates that rDEP-1 is widely expressed in vivo but that expression is highest in cells that form epithelioid monolayers. In cultured cells with epitheliod morphology, including endothelial cells and newborn smooth muscle cells, but not in fibroblast-like cells, rDEP-1 transcript levels are dramatically upregulated as population density increases. In vivo, quiescent endothelial cells in normal arteries express relatively high levels of rDEP-1. During repair of vascular injury, expression of rDEP-1 is downregulated in migrating and proliferating endothelial cells. In vivo, rDEP-1 transcript levels are present in very high levels in megakaryocytes, and circulating plates have high levels of the rDEP-1 protein. In vitro, initiation of differentiation of the human megakaryoblastic cell line CHRF-288-11 with phorbol 12-myristate 13-acetate leads to a very strong upregulation of rDEP-1 transcripts. The deduced structure and the regulation of expression of rDEP-1 suggest that it may play a role in adhesion and/or signaling events involving cell-cell and cell-matrix contact.

NR-code: Nonlinear reconstruction code

Science.gov (United States)

Yu, Yu; Pen, Ue-Li; Zhu, Hong-Ming

2018-04-01

NR-code applies nonlinear reconstruction to the dark matter density field in redshift space and solves for the nonlinear mapping from the initial Lagrangian positions to the final redshift space positions; this reverses the large-scale bulk flows and improves the precision measurement of the baryon acoustic oscillations (BAO) scale.

Quick response codes in Orthodontics

Directory of Open Access Journals (Sweden)

Moidin Shakil

2015-01-01

Full Text Available Quick response (QR code codes are two-dimensional barcodes, which encodes for a large amount of information. QR codes in Orthodontics are an innovative approach in which patient details, radiographic interpretation, and treatment plan can be encoded. Implementing QR code in Orthodontics will save time, reduces paperwork, and minimizes manual efforts in storage and retrieval of patient information during subsequent stages of treatment.

Joint Source-Channel Coding by Means of an Oversampled Filter Bank Code

Directory of Open Access Journals (Sweden)

Marinkovic Slavica

2006-01-01

Full Text Available Quantized frame expansions based on block transforms and oversampled filter banks (OFBs have been considered recently as joint source-channel codes (JSCCs for erasure and error-resilient signal transmission over noisy channels. In this paper, we consider a coding chain involving an OFB-based signal decomposition followed by scalar quantization and a variable-length code (VLC or a fixed-length code (FLC. This paper first examines the problem of channel error localization and correction in quantized OFB signal expansions. The error localization problem is treated as an -ary hypothesis testing problem. The likelihood values are derived from the joint pdf of the syndrome vectors under various hypotheses of impulse noise positions, and in a number of consecutive windows of the received samples. The error amplitudes are then estimated by solving the syndrome equations in the least-square sense. The message signal is reconstructed from the corrected received signal by a pseudoinverse receiver. We then improve the error localization procedure by introducing a per-symbol reliability information in the hypothesis testing procedure of the OFB syndrome decoder. The per-symbol reliability information is produced by the soft-input soft-output (SISO VLC/FLC decoders. This leads to the design of an iterative algorithm for joint decoding of an FLC and an OFB code. The performance of the algorithms developed is evaluated in a wavelet-based image coding system.

Energy Code Enforcement Training Manual : Covering the Washington State Energy Code and the Ventilation and Indoor Air Quality Code.

Energy Technology Data Exchange (ETDEWEB)

Washington State Energy Code Program

1992-05-01

This manual is designed to provide building department personnel with specific inspection and plan review skills and information on provisions of the 1991 edition of the Washington State Energy Code (WSEC). It also provides information on provisions of the new stand-alone Ventilation and Indoor Air Quality (VIAQ) Code.The intent of the WSEC is to reduce the amount of energy used by requiring energy-efficient construction. Such conservation reduces energy requirements, and, as a result, reduces the use of finite resources, such as gas or oil. Lowering energy demand helps everyone by keeping electricity costs down. (It is less expensive to use existing electrical capacity efficiently than it is to develop new and additional capacity needed to heat or cool inefficient buildings.) The new VIAQ Code (effective July, 1991) is a natural companion to the energy code. Whether energy-efficient or not, an homes have potential indoor air quality problems. Studies have shown that indoor air is often more polluted than outdoor air. The VIAQ Code provides a means of exchanging stale air for fresh, without compromising energy savings, by setting standards for a controlled ventilation system. It also offers requirements meant to prevent indoor air pollution from building products or radon.

Noncoherent Spectral Optical CDMA System Using 1D Active Weight Two-Code Keying Codes

Directory of Open Access Journals (Sweden)

Bih-Chyun Yeh

2016-01-01

Full Text Available We propose a new family of one-dimensional (1D active weight two-code keying (TCK in spectral amplitude coding (SAC optical code division multiple access (OCDMA networks. We use encoding and decoding transfer functions to operate the 1D active weight TCK. The proposed structure includes an optical line terminal (OLT and optical network units (ONUs to produce the encoding and decoding codes of the proposed OLT and ONUs, respectively. The proposed ONU uses the modified cross-correlation to remove interferences from other simultaneous users, that is, the multiuser interference (MUI. When the phase-induced intensity noise (PIIN is the most important noise, the modified cross-correlation suppresses the PIIN. In the numerical results, we find that the bit error rate (BER for the proposed system using the 1D active weight TCK codes outperforms that for two other systems using the 1D M-Seq codes and 1D balanced incomplete block design (BIBD codes. The effective source power for the proposed system can achieve −10 dBm, which has less power than that for the other systems.

The reason for having a code of pharmaceutical ethics: Spanish Pharmacists Code of Ethics.

Science.gov (United States)

Barreda Hernández, Dolores; Mulet Alberola, Ana; González Bermejo, Diana; Soler Company, Enrique

2017-05-01

The pharmacist profession needs its own code of conduct set out in writing to serve as a stimulus to pharmacists in their day-to-day work in the different areas of pharmacy, in conjunction always with each individual pharmacist´s personal commitment to their patients, to other healthcare professionals and to society. An overview is provided of the different codes of ethics for pharmacists on the national and international scale, the most up-to-date code for 2015 being presented as a set of principles which must guide a pharmacutical conduct from the standpoint of deliberative judgment. The difference between codes of ethics and codes of practice is discussed. In the era of massive-scale collaboration, this code is a project holding bright prospects for the future. Each individual pharmacutical attitude in practicing their profession must be identified with the pursuit of excellence in their own personal practice for the purpose of achieving the ethical and professional values above and beyond complying with regulations and code of practice. Copyright AULA MEDICA EDICIONES 2017. Published by AULA MEDICA. All rights reserved.

Remote-Handled Transuranic Content Codes

International Nuclear Information System (INIS)

2001-01-01

The Remote-Handled Transuranic (RH-TRU) Content Codes (RH-TRUCON) document represents the development of a uniform content code system for RH-TRU waste to be transported in the 72-Bcask. It will be used to convert existing waste form numbers, content codes, and site-specific identification codes into a system that is uniform across the U.S. Department of Energy (DOE) sites.The existing waste codes at the sites can be grouped under uniform content codes without any lossof waste characterization information. The RH-TRUCON document provides an all-encompassing description for each content code and compiles this information for all DOE sites. Compliance with waste generation, processing, and certification procedures at the sites (outlined in this document foreach content code) ensures that prohibited waste forms are not present in the waste. The content code gives an overall description of the RH-TRU waste material in terms of processes and packaging, as well as the generation location. This helps to provide cradle-to-grave traceability of the waste material so that the various actions required to assess its qualification as payload for the 72-B cask can be performed. The content codes also impose restrictions and requirements on the manner in which a payload can be assembled. The RH-TRU Waste Authorized Methods for Payload Control (RH-TRAMPAC), Appendix 1.3.7 of the 72-B Cask Safety Analysis Report (SAR), describes the current governing procedures applicable for the qualification of waste as payload for the 72-B cask. The logic for this classification is presented in the 72-B Cask SAR. Together, these documents (RH-TRUCON, RH-TRAMPAC, and relevant sections of the 72-B Cask SAR) present the foundation and justification for classifying RH-TRU waste into content codes. Only content codes described in thisdocument can be considered for transport in the 72-B cask. Revisions to this document will be madeas additional waste qualifies for transport. Each content code uniquely

Module type plant system dynamics analysis code (MSG-COPD). Code manual

International Nuclear Information System (INIS)

Sakai, Takaaki

2002-11-01

MSG-COPD is a module type plant system dynamics analysis code which involves a multi-dimensional thermal-hydraulics calculation module to analyze pool type of fast breeder reactors. Explanations of each module and the methods for the input data are described in this code manual. (author)

Explicit MDS Codes with Complementary Duals

DEFF Research Database (Denmark)

Beelen, Duals Peter; Jin, Lingfei

2018-01-01

In 1964, Massey introduced a class of codes with complementary duals which are called Linear Complimentary Dual (LCD for short) codes. He showed that LCD codes have applications in communication system, side-channel attack (SCA) and so on. LCD codes have been extensively studied in literature....... On the other hand, MDS codes form an optimal family of classical codes which have wide applications in both theory and practice. The main purpose of this paper is to give an explicit construction of several classes of LCD MDS codes, using tools from algebraic function fields. We exemplify this construction...

Dysregulation of type 2 innate lymphoid cells and TH2 cells impairs pollutant-induced allergic airway responses.

Science.gov (United States)

De Grove, Katrien C; Provoost, Sharen; Hendriks, Rudi W; McKenzie, Andrew N J; Seys, Leen J M; Kumar, Smitha; Maes, Tania; Brusselle, Guy G; Joos, Guy F

2017-01-01

Although the prominent role of T H 2 cells in type 2 immune responses is well established, the newly identified type 2 innate lymphoid cells (ILC2s) can also contribute to orchestration of allergic responses. Several experimental and epidemiologic studies have provided evidence that allergen-induced airway responses can be further enhanced on exposure to environmental pollutants, such as diesel exhaust particles (DEPs). However, the components and pathways responsible remain incompletely known. We sought to investigate the relative contribution of ILC2 and adaptive T H 2 cell responses in a murine model of DEP-enhanced allergic airway inflammation. Wild-type, Gata-3 +/nlslacZ (Gata-3-haploinsufficient), RAR-related orphan receptor α (RORα) fl/fl IL7R Cre (ILC2-deficient), and recombination-activating gene (Rag) 2 -/- mice were challenged with saline, DEPs, or house dust mite (HDM) or DEP+HDM. Airway hyperresponsiveness, as well as inflammation, and intracellular cytokine expression in ILC2s and T H 2 cells in the bronchoalveolar lavage fluid and lung tissue were assessed. Concomitant DEP+HDM exposure significantly enhanced allergic airway inflammation, as characterized by increased airway eosinophilia, goblet cell metaplasia, accumulation of ILC2s and T H 2 cells, type 2 cytokine production, and airway hyperresponsiveness compared with sole DEPs or HDM. Reduced Gata-3 expression decreased the number of functional ILC2s and T H 2 cells in DEP+HDM-exposed mice, resulting in an impaired DEP-enhanced allergic airway inflammation. Interestingly, although the DEP-enhanced allergic inflammation was marginally reduced in ILC2-deficient mice that received combined DEP+HDM, it was abolished in DEP+HDM-exposed Rag2 -/- mice. These data indicate that dysregulation of ILC2s and T H 2 cells attenuates DEP-enhanced allergic airway inflammation. In addition, a crucial role for the adaptive immune system was shown on concomitant DEP+HDM exposure. Copyright © 2016 American

Serial-data correlator/code translator

Science.gov (United States)

Morgan, L. E.

1977-01-01

System, consisting of sampling flip flop, memory (either RAM or ROM), and memory buffer, correlates sampled data with predetermined acceptance code patterns, translates acceptable code patterns to nonreturn-to-zero code, and identifies data dropouts.

Circular codes revisited: a statistical approach.

Science.gov (United States)

Gonzalez, D L; Giannerini, S; Rosa, R

2011-04-21

In 1996 Arquès and Michel [1996. A complementary circular code in the protein coding genes. J. Theor. Biol. 182, 45-58] discovered the existence of a common circular code in eukaryote and prokaryote genomes. Since then, circular code theory has provoked great interest and underwent a rapid development. In this paper we discuss some theoretical issues related to the synchronization properties of coding sequences and circular codes with particular emphasis on the problem of retrieval and maintenance of the reading frame. Motivated by the theoretical discussion, we adopt a rigorous statistical approach in order to try to answer different questions. First, we investigate the covering capability of the whole class of 216 self-complementary, C(3) maximal codes with respect to a large set of coding sequences. The results indicate that, on average, the code proposed by Arquès and Michel has the best covering capability but, still, there exists a great variability among sequences. Second, we focus on such code and explore the role played by the proportion of the bases by means of a hierarchy of permutation tests. The results show the existence of a sort of optimization mechanism such that coding sequences are tailored as to maximize or minimize the coverage of circular codes on specific reading frames. Such optimization clearly relates the function of circular codes with reading frame synchronization. Copyright © 2011 Elsevier Ltd. All rights reserved.

Non-Protein Coding RNAs

CERN Document Server

Walter, Nils G; Batey, Robert T

2009-01-01

This book assembles chapters from experts in the Biophysics of RNA to provide a broadly accessible snapshot of the current status of this rapidly expanding field. The 2006 Nobel Prize in Physiology or Medicine was awarded to the discoverers of RNA interference, highlighting just one example of a large number of non-protein coding RNAs. Because non-protein coding RNAs outnumber protein coding genes in mammals and other higher eukaryotes, it is now thought that the complexity of organisms is correlated with the fraction of their genome that encodes non-protein coding RNAs. Essential biological processes as diverse as cell differentiation, suppression of infecting viruses and parasitic transposons, higher-level organization of eukaryotic chromosomes, and gene expression itself are found to largely be directed by non-protein coding RNAs. The biophysical study of these RNAs employs X-ray crystallography, NMR, ensemble and single molecule fluorescence spectroscopy, optical tweezers, cryo-electron microscopy, and ot...

Adaptive distributed source coding.

Science.gov (United States)

Varodayan, David; Lin, Yao-Chung; Girod, Bernd

2012-05-01

We consider distributed source coding in the presence of hidden variables that parameterize the statistical dependence among sources. We derive the Slepian-Wolf bound and devise coding algorithms for a block-candidate model of this problem. The encoder sends, in addition to syndrome bits, a portion of the source to the decoder uncoded as doping bits. The decoder uses the sum-product algorithm to simultaneously recover the source symbols and the hidden statistical dependence variables. We also develop novel techniques based on density evolution (DE) to analyze the coding algorithms. We experimentally confirm that our DE analysis closely approximates practical performance. This result allows us to efficiently optimize parameters of the algorithms. In particular, we show that the system performs close to the Slepian-Wolf bound when an appropriate doping rate is selected. We then apply our coding and analysis techniques to a reduced-reference video quality monitoring system and show a bit rate saving of about 75% compared with fixed-length coding.

Australasian code for reporting of mineral resources and ore reserves (the JORC code)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-06-01

The latest revision of the Code first published in 1989 becomes effective in September 1999. It was prepared by the Joint Ores Reserves Committee of the Australasian Institute of Mining and Metallurgy, Australian Institute of Geoscientists and Minerals Council of Australia (JORC). It sets out minimum standards, recommendations and guidelines for public reporting of exploration results, mineral resources and ore reserves in Australasia. In this edition, the guidelines, which were previously separated from the Code, have been placed after the respective Code clauses. The Code is applicable to all solid minerals, including diamonds, other gemstones and coal for which public reporting is required by the Australian and New Zealand Stock Exchanges.

The Aster code

International Nuclear Information System (INIS)

Delbecq, J.M.

1999-01-01

The Aster code is a 2D or 3D finite-element calculation code for structures developed by the R and D direction of Electricite de France (EdF). This dossier presents a complete overview of the characteristics and uses of the Aster code: introduction of version 4; the context of Aster (organisation of the code development, versions, systems and interfaces, development tools, quality assurance, independent validation); static mechanics (linear thermo-elasticity, Euler buckling, cables, Zarka-Casier method); non-linear mechanics (materials behaviour, big deformations, specific loads, unloading and loss of load proportionality indicators, global algorithm, contact and friction); rupture mechanics (G energy restitution level, restitution level in thermo-elasto-plasticity, 3D local energy restitution level, KI and KII stress intensity factors, calculation of limit loads for structures), specific treatments (fatigue, rupture, wear, error estimation); meshes and models (mesh generation, modeling, loads and boundary conditions, links between different modeling processes, resolution of linear systems, display of results etc..); vibration mechanics (modal and harmonic analysis, dynamics with shocks, direct transient dynamics, seismic analysis and aleatory dynamics, non-linear dynamics, dynamical sub-structuring); fluid-structure interactions (internal acoustics, mass, rigidity and damping); linear and non-linear thermal analysis; steels and metal industry (structure transformations); coupled problems (internal chaining, internal thermo-hydro-mechanical coupling, chaining with other codes); products and services. (J.S.)

The path of code linting

CERN Multimedia

CERN. Geneva

2017-01-01

Join the path of code linting and discover how it can help you reach higher levels of programming enlightenment. Today we will cover how to embrace code linters to offload cognitive strain on preserving style standards in your code base as well as avoiding error-prone constructs. Additionally, I will show you the journey ahead for integrating several code linters in the programming tools your already use with very little effort.

Bar codes for nuclear safeguards

International Nuclear Information System (INIS)

Keswani, A.N.; Bieber, A.M. Jr.

1983-01-01

Bar codes similar to those used in supermarkets can be used to reduce the effort and cost of collecting nuclear materials accountability data. A wide range of equipment is now commercially available for printing and reading bar-coded information. Several examples of each of the major types of commercially available equipment are given, and considerations are discussed both for planning systems using bar codes and for choosing suitable bar code equipment

Bar codes for nuclear safeguards

International Nuclear Information System (INIS)

Keswani, A.N.; Bieber, A.M.

1983-01-01

Bar codes similar to those used in supermarkets can be used to reduce the effort and cost of collecting nuclear materials accountability data. A wide range of equipment is now commercially available for printing and reading bar-coded information. Several examples of each of the major types of commercially-available equipment are given, and considerations are discussed both for planning systems using bar codes and for choosing suitable bar code equipment

Rapid determination of nanowires electrical properties using a dielectrophoresis-well based system

Science.gov (United States)

Constantinou, Marios; Hoettges, Kai F.; Krylyuk, Sergiy; Katz, Michael B.; Davydov, Albert; Rigas, Grigorios-Panagiotis; Stolojan, Vlad; Hughes, Michael P.; Shkunov, Maxim

2017-03-01

The use of high quality semiconducting nanomaterials for advanced device applications has been hampered by the unavoidable growth variability of electrical properties of one-dimensional nanomaterials, such as nanowires and nanotubes, thus highlighting the need for the characterization of efficient semiconducting nanomaterials. In this study, we demonstrate a low-cost, industrially scalable dielectrophoretic (DEP) nanowire assembly method for the rapid analysis of the electrical properties of inorganic single crystalline nanowires, by identifying key features in the DEP frequency response spectrum from 1 kHz to 20 MHz in just 60 s. Nanowires dispersed in anisole were characterized using a three-dimensional DEP chip (3DEP), and the resultant spectrum demonstrated a sharp change in nanowire response to DEP signal in 1-20 MHz frequency range. The 3DEP analysis, directly confirmed by field-effect transistor data, indicates that nanowires of higher quality are collected at high DEP signal frequency range above 10 MHz, whereas lower quality nanowires, with two orders of magnitude lower current per nanowire, are collected at lower DEP signal frequencies. These results show that the 3DEP platform can be used as a very efficient characterization tool of the electrical properties of rod-shaped nanoparticles to enable dielectrophoretic selective deposition of nanomaterials with superior conductivity properties.

Data exchange between zero dimensional code and physics platform in the CFETR integrated system code

Energy Technology Data Exchange (ETDEWEB)

Xu, Guoliang [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230026 China (China); Shi, Nan [Institute of Plasma Physics, Chinese Academy of Sciences, No. 350 Shushanhu Road, Hefei (China); Zhou, Yifu; Mao, Shifeng [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230026 China (China); Jian, Xiang [State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronics Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Chen, Jiale [Institute of Plasma Physics, Chinese Academy of Sciences, No. 350 Shushanhu Road, Hefei (China); Liu, Li; Chan, Vincent [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230026 China (China); Ye, Minyou, E-mail: yemy@ustc.edu.cn [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230026 China (China)

2016-11-01

Highlights: • The workflow of the zero dimensional code and the multi-dimension physics platform of CFETR integrated system codeis introduced. • The iteration process among the codes in the physics platform. • The data transfer between the zero dimensionalcode and the physical platform, including data iteration and validation, and justification for performance parameters.. - Abstract: The China Fusion Engineering Test Reactor (CFETR) integrated system code contains three parts: a zero dimensional code, a physics platform and an engineering platform. We use the zero dimensional code to identify a set of preliminary physics and engineering parameters for CFETR, which is used as input to initiate multi-dimension studies using the physics and engineering platform for design, verification and validation. Effective data exchange between the zero dimensional code and the physical platform is critical for the optimization of CFETR design. For example, in evaluating the impact of impurity radiation on core performance, an open field line code is used to calculate the impurity transport from the first-wall boundary to the pedestal. The impurity particle in the pedestal are used as boundary conditions in a transport code for calculating impurity transport in the core plasma and the impact of core radiation on core performance. Comparison of the results from the multi-dimensional study to those from the zero dimensional code is used to further refine the controlled radiation model. The data transfer between the zero dimensional code and the physical platform, including data iteration and validation, and justification for performance parameters will be presented in this paper.

Opportunistic Adaptive Transmission for Network Coding Using Nonbinary LDPC Codes

Directory of Open Access Journals (Sweden)

Cocco Giuseppe

2010-01-01

Full Text Available Network coding allows to exploit spatial diversity naturally present in mobile wireless networks and can be seen as an example of cooperative communication at the link layer and above. Such promising technique needs to rely on a suitable physical layer in order to achieve its best performance. In this paper, we present an opportunistic packet scheduling method based on physical layer considerations. We extend channel adaptation proposed for the broadcast phase of asymmetric two-way bidirectional relaying to a generic number of sinks and apply it to a network context. The method consists of adapting the information rate for each receiving node according to its channel status and independently of the other nodes. In this way, a higher network throughput can be achieved at the expense of a slightly higher complexity at the transmitter. This configuration allows to perform rate adaptation while fully preserving the benefits of channel and network coding. We carry out an information theoretical analysis of such approach and of that typically used in network coding. Numerical results based on nonbinary LDPC codes confirm the effectiveness of our approach with respect to previously proposed opportunistic scheduling techniques.

Code of Practice containing definitions for Safety Codes of Practice for nuclear power plants

International Nuclear Information System (INIS)

1979-01-01

This Code provides definitions of the technical terms used in the licensing applications to be submitted to the Turkish Atomic Energy Commission (TAEC), in accordance with national licensing regulations. The Code is based mainly on the International Atomic Energy Agency's Code of Practice on the subject. (NEA) [fr

The Minimum Distance of Graph Codes

DEFF Research Database (Denmark)

Høholdt, Tom; Justesen, Jørn

2011-01-01

We study codes constructed from graphs where the code symbols are associated with the edges and the symbols connected to a given vertex are restricted to be codewords in a component code. In particular we treat such codes from bipartite expander graphs coming from Euclidean planes and other...... geometries. We give results on the minimum distances of the codes....

SASSYS LMFBR systems code

International Nuclear Information System (INIS)

Dunn, F.E.; Prohammer, F.G.; Weber, D.P.

1983-01-01

The SASSYS LMFBR systems analysis code is being developed mainly to analyze the behavior of the shut-down heat-removal system and the consequences of failures in the system, although it is also capable of analyzing a wide range of transients, from mild operational transients through more severe transients leading to sodium boiling in the core and possible melting of clad and fuel. The code includes a detailed SAS4A multi-channel core treatment plus a general thermal-hydraulic treatment of the primary and intermediate heat-transport loops and the steam generators. The code can handle any LMFBR design, loop or pool, with an arbitrary arrangement of components. The code is fast running: usually faster than real time

Quasi-cyclic unit memory convolutional codes

DEFF Research Database (Denmark)

Justesen, Jørn; Paaske, Erik; Ballan, Mark

1990-01-01

Unit memory convolutional codes with generator matrices, which are composed of circulant submatrices, are introduced. This structure facilitates the analysis of efficient search for good codes. Equivalences among such codes and some of the basic structural properties are discussed. In particular......, catastrophic encoders and minimal encoders are characterized and dual codes treated. Further, various distance measures are discussed, and a number of good codes, some of which result from efficient computer search and some of which result from known block codes, are presented...

Quality assurance and verification of the MACCS [MELCOR Accident Consequence Code System] code, Version 1.5

International Nuclear Information System (INIS)

Dobbe, C.A.; Carlson, E.R.; Marshall, N.H.; Marwil, E.S.; Tolli, J.E.

1990-02-01

An independent quality assurance (QA) and verification of Version 1.5 of the MELCOR Accident Consequence Code System (MACCS) was performed. The QA and verification involved examination of the code and associated documentation for consistent and correct implementation of the models in an error-free FORTRAN computer code. The QA and verification was not intended to determine either the adequacy or appropriateness of the models that are used MACCS 1.5. The reviews uncovered errors which were fixed by the SNL MACCS code development staff prior to the release of MACCS 1.5. Some difficulties related to documentation improvement and code restructuring are also presented. The QA and verification process concluded that Version 1.5 of the MACCS code, within the scope and limitations process concluded that Version 1.5 of the MACCS code, within the scope and limitations of the models implemented in the code is essentially error free and ready for widespread use. 15 refs., 11 tabs

QR code for medical information uses.

Science.gov (United States)

Fontelo, Paul; Liu, Fang; Ducut, Erick G

2008-11-06

We developed QR code online tools, simulated and tested QR code applications for medical information uses including scanning QR code labels, URLs and authentication. Our results show possible applications for QR code in medicine.

Lean coding machine. Facilities target productivity and job satisfaction with coding automation.

Science.gov (United States)

Rollins, Genna

2010-07-01

Facilities are turning to coding automation to help manage the volume of electronic documentation, streamlining workflow, boosting productivity, and increasing job satisfaction. As EHR adoption increases, computer-assisted coding may become a necessity, not an option.

ESCADRE and ICARE code systems

International Nuclear Information System (INIS)

Reocreux, M.; Gauvain, J.

1992-01-01

The French sever accident code development program is following two parallel approaches: the first one is dealing with ''integral codes'' which are designed for giving immediate engineer answers, the second one is following a more mechanistic way in order to have the capability of detailed analysis of experiments, in order to get a better understanding of the scaling problem and reach a better confidence in plant calculations. In the first approach a complete system has been developed and is being used for practical cases: this is the ESCADRE system. In the second approach, a set of codes dealing first with primary circuit is being developed: a mechanistic core degradation code, ICARE, has been issued and is being coupled with the advanced thermalhydraulic code CATHARE. Fission product codes have been also coupled to CATHARE. The ''integral'' ESCADRE system and the mechanistic ICARE and associated codes are described. Their main characteristics are reviewed and the status of their development and assessment given. Future studies are finally discussed. 36 refs, 4 figs, 1 tab

Clean Code - Why you should care

CERN Multimedia

CERN. Geneva

2015-01-01

- Martin Fowler Writing code is communication, not solely with the computer that executes it, but also with other developers and with oneself. A developer spends a lot of his working time reading and understanding code that was written by other developers or by himself in the past. The readability of the code plays an important factor for the time to find a bug or add new functionality, which in turn has a big impact on the productivity. Code that is difficult to undestand, hard to maintain and refactor, and offers many spots for bugs to hide is not considered to be "clean code". But what could considered as "clean code" and what are the advantages of a strict application of its guidelines? In this presentation we will take a look on some typical "code smells" and proposed guidelines to improve your coding skills to write cleaner code that is less bug prone and better to maintain.

Burnup code for fuel assembly by Monte Carlo code. MKENO-BURN

International Nuclear Information System (INIS)

Naito, Yoshitaka; Suyama, Kenya; Masukawa, Fumihiro; Matsumoto, Kiyoshi; Kurosawa, Masayoshi; Kaneko, Toshiyuki.

1996-12-01

The evaluation of neutron spectrum is so important for burnup calculation of the heterogeneous geometry like recent BWR fuel assembly. MKENO-BURN is a multi dimensional burnup code that based on the three dimensional monte carlo neutron transport code 'MULTI-KENO' and the routine for the burnup calculation of the one dimensional burnup code 'UNITBURN'. MKENO-BURN analyzes the burnup problem of arbitrary regions after evaluating the neutron spectrum and making one group cross section in three dimensional geometry with MULTI-KENO. It enables us to do three dimensional burnup calculation. This report consists of general description of MKENO-BURN and the input data. (author)

Burnup code for fuel assembly by Monte Carlo code. MKENO-BURN

Energy Technology Data Exchange (ETDEWEB)

Naito, Yoshitaka; Suyama, Kenya; Masukawa, Fumihiro; Matsumoto, Kiyoshi; Kurosawa, Masayoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Kaneko, Toshiyuki

1996-12-01

The evaluation of neutron spectrum is so important for burnup calculation of the heterogeneous geometry like recent BWR fuel assembly. MKENO-BURN is a multi dimensional burnup code that based on the three dimensional monte carlo neutron transport code `MULTI-KENO` and the routine for the burnup calculation of the one dimensional burnup code `UNITBURN`. MKENO-BURN analyzes the burnup problem of arbitrary regions after evaluating the neutron spectrum and making one group cross section in three dimensional geometry with MULTI-KENO. It enables us to do three dimensional burnup calculation. This report consists of general description of MKENO-BURN and the input data. (author)

The Art of Readable Code

CERN Document Server

Boswell, Dustin

2011-01-01

As programmers, we've all seen source code that's so ugly and buggy it makes our brain ache. Over the past five years, authors Dustin Boswell and Trevor Foucher have analyzed hundreds of examples of "bad code" (much of it their own) to determine why they're bad and how they could be improved. Their conclusion? You need to write code that minimizes the time it would take someone else to understand it-even if that someone else is you. This book focuses on basic principles and practical techniques you can apply every time you write code. Using easy-to-digest code examples from different languag

An implicit Smooth Particle Hydrodynamic code

Energy Technology Data Exchange (ETDEWEB)

Knapp, Charles E. [Univ. of New Mexico, Albuquerque, NM (United States)

2000-05-01

An implicit version of the Smooth Particle Hydrodynamic (SPH) code SPHINX has been written and is working. In conjunction with the SPHINX code the new implicit code models fluids and solids under a wide range of conditions. SPH codes are Lagrangian, meshless and use particles to model the fluids and solids. The implicit code makes use of the Krylov iterative techniques for solving large linear-systems and a Newton-Raphson method for non-linear corrections. It uses numerical derivatives to construct the Jacobian matrix. It uses sparse techniques to save on memory storage and to reduce the amount of computation. It is believed that this is the first implicit SPH code to use Newton-Krylov techniques, and is also the first implicit SPH code to model solids. A description of SPH and the techniques used in the implicit code are presented. Then, the results of a number of tests cases are discussed, which include a shock tube problem, a Rayleigh-Taylor problem, a breaking dam problem, and a single jet of gas problem. The results are shown to be in very good agreement with analytic solutions, experimental results, and the explicit SPHINX code. In the case of the single jet of gas case it has been demonstrated that the implicit code can do a problem in much shorter time than the explicit code. The problem was, however, very unphysical, but it does demonstrate the potential of the implicit code. It is a first step toward a useful implicit SPH code.

Code of Ethics

Science.gov (United States)

Division for Early Childhood, Council for Exceptional Children, 2009

2009-01-01

The Code of Ethics of the Division for Early Childhood (DEC) of the Council for Exceptional Children is a public statement of principles and practice guidelines supported by the mission of DEC. The foundation of this Code is based on sound ethical reasoning related to professional practice with young children with disabilities and their families…

Scrum Code Camps

DEFF Research Database (Denmark)

Pries-Heje, Lene; Pries-Heje, Jan; Dalgaard, Bente

2013-01-01

is required. In this paper we present the design of such a new approach, the Scrum Code Camp, which can be used to assess agile team capability in a transparent and consistent way. A design science research approach is used to analyze properties of two instances of the Scrum Code Camp where seven agile teams...

Polarization diversity scheme on spectral polarization coding optical code-division multiple-access network

Science.gov (United States)

Yen, Chih-Ta; Huang, Jen-Fa; Chang, Yao-Tang; Chen, Bo-Hau

2010-12-01

We present an experiment demonstrating the spectral-polarization coding optical code-division multiple-access system introduced with a nonideal state of polarization (SOP) matching conditions. In the proposed system, the encoding and double balanced-detection processes are implemented using a polarization-diversity scheme. Because of the quasiorthogonality of Hadamard codes combining with array waveguide grating routers and a polarization beam splitter, the proposed codec pair can encode-decode multiple code words of Hadamard code while retaining the ability for multiple-access interference cancellation. The experimental results demonstrate that when the system is maintained with an orthogonal SOP for each user, an effective reduction in the phase-induced intensity noise is obtained. The analytical SNR values are found to overstate the experimental results by around 2 dB when the received effective power is large. This is mainly limited by insertion losses of components and a nonflattened optical light source. Furthermore, the matching conditions can be improved by decreasing nonideal influences.

Physics of codes

International Nuclear Information System (INIS)

Cooper, R.K.; Jones, M.E.

1989-01-01

The title given this paper is a bit presumptuous, since one can hardly expect to cover the physics incorporated into all the codes already written and currently being written. The authors focus on those codes which have been found to be particularly useful in the analysis and design of linacs. At that the authors will be a bit parochial and discuss primarily those codes used for the design of radio-frequency (rf) linacs, although the discussions of TRANSPORT and MARYLIE have little to do with the time structures of the beams being analyzed. The plan of this paper is first to describe rather simply the concepts of emittance and brightness, then to describe rather briefly each of the codes TRANSPORT, PARMTEQ, TBCI, MARYLIE, and ISIS, indicating what physics is and is not included in each of them. It is expected that the vast majority of what is covered will apply equally well to protons and electrons (and other particles). This material is intended to be tutorial in nature and can in no way be expected to be exhaustive. 31 references, 4 figures

Contract W911NF-12-C-0102 (Advanced Diamond Technologies, Inc.)

Science.gov (United States)

2013-06-24

established. Accomplished mostly systematic fibrinogen test on different diamond surfaces. It showed ADT’s UNCD more resistive to fibrinogen than MCD ...doped UNCD both more resistive to thrombosis than MCD . In this phase I project, we studied the biocompatibility of the diamond ribbon surface by...as-dep, H2 Yes Yes G UNCD as-dep No Yes H UNCD as-dep, H2 No Yes I UNCD SiO2 control J UNCD SiO2, H2 control K MCD as-dep L MCD as-dep, H2

Tokamak plasma power balance calculation code (TPC code) outline and operation manual

International Nuclear Information System (INIS)

Fujieda, Hirobumi; Murakami, Yoshiki; Sugihara, Masayoshi.

1992-11-01

This report is a detailed description on the TPC code, that calculates the power balance of a tokamak plasma according to the ITER guidelines. The TPC code works on a personal computer (Macintosh or J-3100/ IBM-PC). Using input data such as the plasma shape, toroidal magnetic field, plasma current, electron temperature, electron density, impurities and heating power, TPC code can determine the operation point of the fusion reactor (Ion temperature is assumed to be equal to the electron temperature). Supplied flux (Volt · sec) and burn time are also estimated by coil design parameters. Calculated energy confinement time is compared with various L-mode scaling laws and the confinement enhancement factor (H-factor) is evaluated. Divertor heat load is predicted by using simple scaling models (constant-χ, Bohm-type-χ and JT-60U empirical scaling models). Frequently used data can be stored in a 'device file' and used as the default values. TPC code can generate 2-D mesh data and the POPCON plot is drawn by a contour line plotting program (CONPLT). The operation manual about CONPLT code is also described. (author)

Introduction of thermal-hydraulic analysis code and system analysis code for HTGR

International Nuclear Information System (INIS)

Tanaka, Mitsuhiro; Izaki, Makoto; Koike, Hiroyuki; Tokumitsu, Masashi

1984-01-01

Kawasaki Heavy Industries Ltd. has advanced the development and systematization of analysis codes, aiming at lining up the analysis codes for heat transferring flow and control characteristics, taking up HTGR plants as the main object. In order to make the model of flow when shock waves propagate to heating tubes, SALE-3D which can analyze a complex system was developed, therefore, it is reported in this paper. Concerning the analysis code for control characteristics, the method of sensitivity analysis in a topological space including an example of application is reported. The flow analysis code SALE-3D is that for analyzing the flow of compressible viscous fluid in a three-dimensional system over the velocity range from incompressibility limit to supersonic velocity. The fundamental equations and fundamental algorithm of the SALE-3D, the calculation of cell volume, the plotting of perspective drawings and the analysis of the three-dimensional behavior of shock waves propagating in heating tubes after their rupture accident are described. The method of sensitivity analysis was added to the analysis code for control characteristics in a topological space, and blow-down phenomena was analyzed by its application. (Kako, I.)

Dynamic benchmarking of simulation codes

International Nuclear Information System (INIS)

Henry, R.E.; Paik, C.Y.; Hauser, G.M.

1996-01-01

Computer simulation of nuclear power plant response can be a full-scope control room simulator, an engineering simulator to represent the general behavior of the plant under normal and abnormal conditions, or the modeling of the plant response to conditions that would eventually lead to core damage. In any of these, the underlying foundation for their use in analysing situations, training of vendor/utility personnel, etc. is how well they represent what has been known from industrial experience, large integral experiments and separate effects tests. Typically, simulation codes are benchmarked with some of these; the level of agreement necessary being dependent upon the ultimate use of the simulation tool. However, these analytical models are computer codes, and as a result, the capabilities are continually enhanced, errors are corrected, new situations are imposed on the code that are outside of the original design basis, etc. Consequently, there is a continual need to assure that the benchmarks with important transients are preserved as the computer code evolves. Retention of this benchmarking capability is essential to develop trust in the computer code. Given the evolving world of computer codes, how is this retention of benchmarking capabilities accomplished? For the MAAP4 codes this capability is accomplished through a 'dynamic benchmarking' feature embedded in the source code. In particular, a set of dynamic benchmarks are included in the source code and these are exercised every time the archive codes are upgraded and distributed to the MAAP users. Three different types of dynamic benchmarks are used: plant transients; large integral experiments; and separate effects tests. Each of these is performed in a different manner. The first is accomplished by developing a parameter file for the plant modeled and an input deck to describe the sequence; i.e. the entire MAAP4 code is exercised. The pertinent plant data is included in the source code and the computer

A new two dimensional spectral/spatial multi-diagonal code for noncoherent optical code division multiple access (OCDMA) systems

Science.gov (United States)

Kadhim, Rasim Azeez; Fadhil, Hilal Adnan; Aljunid, S. A.; Razalli, Mohamad Shahrazel

2014-10-01

A new two dimensional codes family, namely two dimensional multi-diagonal (2D-MD) codes, is proposed for spectral/spatial non-coherent OCDMA systems based on the one dimensional MD code. Since the MD code has the property of zero cross correlation, the proposed 2D-MD code also has this property. So that, the multi-access interference (MAI) is fully eliminated and the phase induced intensity noise (PIIN) is suppressed with the proposed code. Code performance is analyzed in terms of bit error rate (BER) while considering the effect of shot noise, PIIN, and thermal noise. The performance of the proposed code is compared with the related MD, modified quadratic congruence (MQC), two dimensional perfect difference (2D-PD) and two dimensional diluted perfect difference (2D-DPD) codes. The analytical and the simulation results reveal that the proposed 2D-MD code outperforms the other codes. Moreover, a large number of simultaneous users can be accommodated at low BER and high data rate.

RH-TRU Waste Content Codes

Energy Technology Data Exchange (ETDEWEB)

Washington TRU Solutions

2007-07-01

The Remote-Handled Transuranic (RH-TRU) Content Codes (RH-TRUCON) document describes the inventory of RH-TRU waste within the transportation parameters specified by the Remote-Handled Transuranic Waste Authorized Methods for Payload Control (RH-TRAMPAC).1 The RH-TRAMPAC defines the allowable payload for the RH-TRU 72-B. This document is a catalog of RH-TRU 72-B authorized contents by site. A content code is defined by the following components: • A two-letter site abbreviation that designates the physical location of the generated/stored waste (e.g., ID for Idaho National Laboratory [INL]). The site-specific letter designations for each of the sites are provided in Table 1. • A three-digit code that designates the physical and chemical form of the waste (e.g., content code 317 denotes TRU Metal Waste). For RH-TRU waste to be transported in the RH-TRU 72-B, the first number of this three-digit code is “3.” The second and third numbers of the three-digit code describe the physical and chemical form of the waste. Table 2 provides a brief description of each generic code. Content codes are further defined as subcodes by an alpha trailer after the three-digit code to allow segregation of wastes that differ in one or more parameter(s). For example, the alpha trailers of the subcodes ID 322A and ID 322B may be used to differentiate between waste packaging configurations. As detailed in the RH-TRAMPAC, compliance with flammable gas limits may be demonstrated through the evaluation of compliance with either a decay heat limit or flammable gas generation rate (FGGR) limit per container specified in approved content codes. As applicable, if a container meets the watt*year criteria specified by the RH-TRAMPAC, the decay heat limits based on the dose-dependent G value may be used as specified in an approved content code. If a site implements the administrative controls outlined in the RH-TRAMPAC and Appendix 2.4 of the RH-TRU Payload Appendices, the decay heat or FGGR

Remote-Handled Transuranic Content Codes

Energy Technology Data Exchange (ETDEWEB)

Washington TRU Solutions

2006-12-01

The Remote-Handled Transuranic (RH-TRU) Content Codes (RH-TRUCON) document describes the inventory of RH-TRU waste within the transportation parameters specified by the Remote-Handled Transuranic Waste Authorized Methods for Payload Control (RH-TRAMPAC).1 The RH-TRAMPAC defines the allowable payload for the RH-TRU 72-B. This document is a catalog of RH-TRU 72-B authorized contents by site. A content code is defined by the following components: • A two-letter site abbreviation that designates the physical location of the generated/stored waste (e.g., ID for Idaho National Laboratory [INL]). The site-specific letter designations for each of the sites are provided in Table 1. • A three-digit code that designates the physical and chemical form of the waste (e.g., content code 317 denotes TRU Metal Waste). For RH-TRU waste to be transported in the RH-TRU 72-B, the first number of this three-digit code is “3.” The second and third numbers of the three-digit code describe the physical and chemical form of the waste. Table 2 provides a brief description of each generic code. Content codes are further defined as subcodes by an alpha trailer after the three-digit code to allow segregation of wastes that differ in one or more parameter(s). For example, the alpha trailers of the subcodes ID 322A and ID 322B may be used to differentiate between waste packaging configurations. As detailed in the RH-TRAMPAC, compliance with flammable gas limits may be demonstrated through the evaluation of compliance with either a decay heat limit or flammable gas generation rate (FGGR) limit per container specified in approved content codes. As applicable, if a container meets the watt*year criteria specified by the RH-TRAMPAC, the decay heat limits based on the dose-dependent G value may be used as specified in an approved content code. If a site implements the administrative controls outlined in the RH-TRAMPAC and Appendix 2.4 of the RH-TRU Payload Appendices, the decay heat or FGGR

Optical code division multiple access secure communications systems with rapid reconfigurable polarization shift key user code

Science.gov (United States)

Gao, Kaiqiang; Wu, Chongqing; Sheng, Xinzhi; Shang, Chao; Liu, Lanlan; Wang, Jian

2015-09-01

An optical code division multiple access (OCDMA) secure communications system scheme with rapid reconfigurable polarization shift key (Pol-SK) bipolar user code is proposed and demonstrated. Compared to fix code OCDMA, by constantly changing the user code, the performance of anti-eavesdropping is greatly improved. The Pol-SK OCDMA experiment with a 10 Gchip/s user code and a 1.25 Gb/s user data of payload has been realized, which means this scheme has better tolerance and could be easily realized.

Input/output manual of light water reactor fuel performance code FEMAXI-7 and its related codes

Energy Technology Data Exchange (ETDEWEB)

Suzuki, Motoe; Udagawa, Yutaka; Nagase, Fumihisa [Japan Atomic Energy Agency, Nuclear Safety Research Center, Tokai, Ibaraki (Japan); Saitou, Hiroaki [ITOCHU Techno-Solutions Corp., Tokyo (Japan)

2012-07-15

A light water reactor fuel analysis code FEMAXI-7 has been developed for the purpose of analyzing the fuel behavior in normal conditions and in anticipated transient conditions. Numerous functional improvements and extensions have been incorporated in FEMAXI-7, which has been fully disclosed in the code model description published recently as JAEA-Data/Code 2010-035. The present manual, which is the counterpart of this description, gives detailed explanations of operation method of FEMAXI-7 code and its related codes, methods of Input/Output, methods of source code modification, features of subroutine modules, and internal variables in a specific manner in order to facilitate users to perform a fuel analysis with FEMAXI-7. This report includes some descriptions which are modified from the original contents of JAEA-Data/Code 2010-035. A CD-ROM is attached as an appendix. (author)

Input/output manual of light water reactor fuel performance code FEMAXI-7 and its related codes

International Nuclear Information System (INIS)

Suzuki, Motoe; Udagawa, Yutaka; Nagase, Fumihisa; Saitou, Hiroaki

2012-07-01

A light water reactor fuel analysis code FEMAXI-7 has been developed for the purpose of analyzing the fuel behavior in normal conditions and in anticipated transient conditions. Numerous functional improvements and extensions have been incorporated in FEMAXI-7, which has been fully disclosed in the code model description published recently as JAEA-Data/Code 2010-035. The present manual, which is the counterpart of this description, gives detailed explanations of operation method of FEMAXI-7 code and its related codes, methods of Input/Output, methods of source code modification, features of subroutine modules, and internal variables in a specific manner in order to facilitate users to perform a fuel analysis with FEMAXI-7. This report includes some descriptions which are modified from the original contents of JAEA-Data/Code 2010-035. A CD-ROM is attached as an appendix. (author)

Developments of HTGR thermofluid dynamic analysis codes and HTGR plant dynamic simulation code

International Nuclear Information System (INIS)

Tanaka, Mitsuhiro; Izaki, Makoto; Koike, Hiroyuki; Tokumitsu, Masashi

1983-01-01

In nuclear power plants as well as high temperature gas-cooled reactor plants, the design is mostly performed on the basis of the results after their characteristics have been grasped by carrying out the numerical simulation using the analysis code. Also in Kawasaki Heavy Industries Ltd., on the basis of the system engineering accumulated with gas-cooled reactors since several years ago, the preparation and systematization of analysis codes have been advanced, aiming at lining up the analysis codes for heat transferring flow and control characteristics, taking up HTGR plants as the main object. In this report, a part of the results is described. The example of the analysis applying the two-dimensional compressible flow analysis codes SOLA-VOF and SALE-2D, which were developed by Los Alamos National Laboratory in USA and modified for use in Kawasaki, to HTGR system is reported. Besides, Kawasaki has developed the control characteristics analyzing code DYSCO by which the change of system composition is easy and high versatility is available. The outline, fundamental equations, fundamental algorithms and examples of application of the SOLA-VOF and SALE-2D, the present status of system characteristic simulation codes and the outline of the DYSCO are described. (Kako, I.)

Interrelations of codes in human semiotic systems.

OpenAIRE

Somov, Georgij

2016-01-01

Codes can be viewed as mechanisms that enable relations of signs and their components, i.e., semiosis is actualized. The combinations of these relations produce new relations as new codes are building over other codes. Structures appear in the mechanisms of codes. Hence, codes can be described as transformations of structures from some material systems into others. Structures belong to different carriers, but exist in codes in their "pure" form. Building of codes over other codes fosters t...

Performance optimization of spectral amplitude coding OCDMA system using new enhanced multi diagonal code

Science.gov (United States)

Imtiaz, Waqas A.; Ilyas, M.; Khan, Yousaf

2016-11-01

This paper propose a new code to optimize the performance of spectral amplitude coding-optical code division multiple access (SAC-OCDMA) system. The unique two-matrix structure of the proposed enhanced multi diagonal (EMD) code and effective correlation properties, between intended and interfering subscribers, significantly elevates the performance of SAC-OCDMA system by negating multiple access interference (MAI) and associated phase induce intensity noise (PIIN). Performance of SAC-OCDMA system based on the proposed code is thoroughly analyzed for two detection techniques through analytic and simulation analysis by referring to bit error rate (BER), signal to noise ratio (SNR) and eye patterns at the receiving end. It is shown that EMD code while using SDD technique provides high transmission capacity, reduces the receiver complexity, and provides better performance as compared to complementary subtraction detection (CSD) technique. Furthermore, analysis shows that, for a minimum acceptable BER of 10-9 , the proposed system supports 64 subscribers at data rates of up to 2 Gbps for both up-down link transmission.

3D neutronic codes coupled with thermal-hydraulic system codes for PWR, and BWR and VVER reactors

Energy Technology Data Exchange (ETDEWEB)

Langenbuch, S.; Velkov, K. [GRS, Garching (Germany); Lizorkin, M. [Kurchatov-Institute, Moscow (Russian Federation)] [and others

1997-07-01

This paper describes the objectives of code development for coupling 3D neutronics codes with thermal-hydraulic system codes. The present status of coupling ATHLET with three 3D neutronics codes for VVER- and LWR-reactors is presented. After describing the basic features of the 3D neutronic codes BIPR-8 from Kurchatov-Institute, DYN3D from Research Center Rossendorf and QUABOX/CUBBOX from GRS, first applications of coupled codes for different transient and accident scenarios are presented. The need of further investigations is discussed.