WorldWideScience

Sample records for coast guard cutter

  1. Coast guard : better logistics planning needed to aid operational decisions related to the deployment of the national security cutter and its support assets.

    Science.gov (United States)

    2009-07-01

    As part of its more than $$24 billion Deepwater program to replace aging vessels and aircraft with new or upgraded assets, the Coast Guard is preparing the National Security Cutter (NSC) for service. GAO previously reported on Deepwater assets' deplo...

  2. The Coast Guard’s Critical Role as an Armed Service

    Science.gov (United States)

    2012-03-22

    security authorities. Although the Revenue Cutter Service under the Department of the Treasury was primarily responsible for the enforcement of taxation ...maritime exercises with Brunei, Thailand, Indonesia, Singapore, and Malaysia .15 Coast Guard cutters and Law Enforcement Detachments (LEDETs

  3. Coast Guard: Progress Being Made on Deepwater Project, but Risks Remain

    National Research Council Canada - National Science Library

    2001-01-01

    The Coast Guard is in the final stages of planning the largest procurement project in its history the modernization and/or replacement of over 90 cutters and 200 aircraft used for missions beyond 50 miles from shore...

  4. Coast Guard Acquisitions: Enhanced Oversight of Testing Could Benefit National Security Cutter Program and Future DHS Acquisitions

    Science.gov (United States)

    2016-02-03

    based on our January 2016 report on the NSC’s IOT &E event.2 I will address issues related to (1) the results of the NSC’s IOT &E, (2) the Coast Guard’s...before the testing is complete, meaning that the Coast Guard will be operating 6 NSCs before it has resolved issues from IOT &E and knows the... IOT &E event, the Coast Guard had nearly four years of experience operating the NSCs. The Coast Guard has encountered several issues that require

  5. Collaborative Applications Used in a Wireless Environment at Sea for Use in Coast Guard Law Enforcement and Homeland Security Missions

    National Research Council Canada - National Science Library

    Klopson, Jadon E; Burdian, Stephen V

    2005-01-01

    ... an 802.11 mesh layer architecture and 802.16 Orthogonal Frequency Division Multiplexing, in order to effectively and more efficiently transmit data and create a symbiotic operational picture between Coast Guard Cutters, their boarding teams...

  6. Coast Guard

    International Nuclear Information System (INIS)

    1991-09-01

    The 11-million gallon Exxon Valdez oil spill highlighted deficiencies in the nation's ability to contain and recover spilled oil. The Oil Pollution Act of 1990 represents a major effort by Congress to address these deficiencies and to clarify the roles and responsibilities of the private sector and the federal government in preventing, preparing for, and responding to oil spills. This report examines the Coast Guard's efforts to avoid unnecessary and wasteful duplication by coordinating with the private sector and others, including federal and state agencies, its plans to buy oil spill response equipment and the new responsibilities the act places on the private sector and the Coast Guard and if these responsibilities call for a shift in emphasis in Coast Guard oil spill response activities

  7. Crew Fatigue and Performance on U.S. Coast Guard Cutters

    National Research Council Canada - National Science Library

    1998-01-01

    .... Descriptive measures were obtained on five cutters of three types under normal operations. Evidence of mild fatigue, specifically daytime sleepiness and a degradation of vigilance performance, was observed in many crew members...

  8. Coast Guard Compass

    Science.gov (United States)

    looks on as Adm. Charles Ray thanks Adm. Chuck Michel for his service as the 30th vice commandant of the commandant Adm. Charles W. Ray relieved Adm. Charles D. Michel as vice commandant of the U.S. Coast Guard by . Following graduation and commissioning as an officer in the Coast Guard, Wright will be heading to the

  9. Cutter Connectivity Bandwidth Study

    Science.gov (United States)

    2002-10-01

    The goal of this study was to determine how much bandwidth is required for cutters to meet emerging data transfer requirements. The Cutter Connectivity Business Solutions Team with guidance front the Commandant's 5 Innovation Council sponsored this study. Today, many Coast Guard administrative and business functions are being conducted via electronic means. Although our larger cutters can establish part-time connectivity using commercial satellite communications (SATCOM) while underway, there are numerous complaints regarding poor application performance. Additionally, smaller cutters do not have any standard means of underway connectivity. The R&D study shows the most important factor affecting web performance and enterprise applications onboard cutters was latency. Latency describes the time it takes the signal to reach the satellite and come back down through space. The latency due to use of higher orbit satellites is causing poor application performance and inefficient use of expensive SATCOM links. To improve performance, the CC must, (1) reduce latency by using alternate communications links such as low-earth orbit satellites, (2) tailor applications to the SATCOM link and/or (3) optimize protocols used for data communication to minimize time required by present applications to establish communications between the user and the host systems.

  10. 33 CFR 23.10 - Coast Guard emblem.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Coast Guard emblem. 23.10 Section... DISTINCTIVE MARKINGS FOR COAST GUARD VESSELS AND AIRCRAFT § 23.10 Coast Guard emblem. (a) The distinctive emblem of the Coast Guard shall be as follows: On a disc the shield of the Coat of Arms of the United...

  11. 46 CFR 50.10-25 - Coast Guard Symbol.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Coast Guard Symbol. 50.10-25 Section 50.10-25 Shipping... Definition of Terms Used in This Subchapter § 50.10-25 Coast Guard Symbol. (a) The term Coast Guard Symbol... impression of the Coast Guard Symbol for stamping nameplates and specimens is shown in Figure 50.10-25(b...

  12. 2008 Joint United States-Canadian program to explore the limits of the Extended Continental Shelf aboard the U.S. Coast Guard cutter Healy--Cruise HLY0806

    Science.gov (United States)

    Childs, Jonathan R.; Triezenberg, Peter J.; Danforth, William W.

    2012-01-01

    In September 2008, the U.S. Geological Survey (USGS), in cooperation with Natural Resources Canada, Geological Survey of Canada (GSC), conducted bathymetric and geophysical surveys in the Arctic Beaufort Sea aboard the U.S. Coast Guard cutter USCGC Healy. The principal objective of this mission to the high Arctic was to acquire data in support of delineation of the outer limits of the U.S. and Canadian Extended Continental Shelf (ECS) in the Arctic Ocean in accordance with the provisions of Article 76 of the Law of the Sea Convention. The Healy was accompanied by the Canadian Coast Guard icebreaker Louis S. St- Laurent. The science parties on the two vessels consisted principally of staff from the USGS (Healy), and the GSC and the Canadian Hydrographic Service (Louis). The crew included marine mammal and Native-community observers, ice observers, and biologists conducting research of opportunity in the Arctic Ocean. The joint survey proved an unqualified success. The Healy collected 5,528 km of swath (multibeam) bathymetry (38,806 km2) and CHIRP subbottom profile data, with accompanying marine gravity measurements. The Louis acquired 2,817 km of multichannel seismic (airgun) deep-penetration reflection-profile data along 12 continuous lines, as well as 35 sonobuoy refraction stations and accompanying single-beam bathymetry. The coordinated efforts of the two vessels resulted in seismic-reflection profile data of much higher quality and continuity than if the data had been acquired with a single vessel alone. Equipment failure rate of the seismic equipment gear aboard the Louis was greatly improved with the advantage of having a leading icebreaker. When ice conditions proved too severe to deploy the seismic system, the Louis led the Healy, resulting in much improved quality of the swath bathymetry and CHIRP sub-bottom data in comparison with data collected by the Healy in the lead or working alone. Ancillary science objectives, including ice observations, deployment

  13. 33 CFR 125.11 - Form of Coast Guard Port Security Card.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Form of Coast Guard Port Security... WATERFRONT FACILITIES OR VESSELS § 125.11 Form of Coast Guard Port Security Card. The Coast Guard Port... data. ...

  14. Connectivity for underway Coast Guard patrol boats

    OpenAIRE

    Busch, Gregory C.

    1997-01-01

    Approved for public release; distribution is unlimited This thesis examines the US Coast Guard patrol boat's ability to effectively exchange operational data while underway. The patrol boat is currently unable to obtain tactical law enforcement information from the central Law Enforcement Information System 2 (LEIS 2) database while on patrol. LEIS 2 provides access to law enforcement information from Coast Guard, FBI, and state and local law enforcement agencies. Availability of this info...

  15. US Coast Guard Stations in Louisiana, Geographic NAD83, USCG [coast_guard_stations_USCG_1997

    Data.gov (United States)

    Louisiana Geographic Information Center — This is is a point dataset for the locations and attributes of eight US Coast Guard stations in Louisiana. The attributes include name, address, latitude (NAD27),...

  16. Great Lakes Surface Ice Reports from U.S. Coast Guard

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Data consist of ice observations from U.S. Coast Guard vessels operating on the Great Lakes, and from Coast Guard shore stations reported via teletype messages and...

  17. Coast Guard Proceedings. Volume 70, Number 2, Summer 2013

    Science.gov (United States)

    2013-01-01

    and well-being. Most Inuit are coastal people who rely heavily on resources from the ocean for nutritional and cultural survival. The Inuit are a...defend a soccer ball from a crewmember of the Russian vessel Vorovsky at the Coast Guard gym at Base Kodiak, Alaska. U.S. Coast Guard photo by

  18. U.S. Coast Guard (USCG) Districts

    Data.gov (United States)

    Department of Homeland Security — This layer is a polygonal dataset that represents land and maritime boundaries for each representative United States Coast Guard district, which includes district 1,...

  19. 49 CFR 1520.15 - SSI disclosed by TSA or the Coast Guard.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false SSI disclosed by TSA or the Coast Guard. 1520.15... PROTECTION OF SENSITIVE SECURITY INFORMATION § 1520.15 SSI disclosed by TSA or the Coast Guard. (a) In... available for public inspection or copying, nor does TSA or the Coast Guard release such records to persons...

  20. 76 FR 17782 - Protection for Whistleblowers in the Coast Guard

    Science.gov (United States)

    2011-03-31

    ... ``Keyword'' box, and then clicking ``Search.'' FOR FURTHER INFORMATION CONTACT: If you have questions on..., telephone 202-372-3777, e-mail [email protected] . If you have questions on viewing or submitting... Protection for Whistleblowers in the Coast Guard AGENCY: Coast Guard, DHS. ACTION: Direct final rule...

  1. 77 FR 16929 - Safety Zones; Fireworks Displays within the Fifth Coast Guard District

    Science.gov (United States)

    2012-03-23

    ...-AA00 Safety Zones; Fireworks Displays within the Fifth Coast Guard District AGENCY: Coast Guard, DHS... for fireworks displays at various locations within the geographic boundary of the Fifth Coast Guard... by fireworks displays. Entry into or movement within these zones during the enforcement periods is...

  2. United States Coast Guard: Officer Corps Military Professional Development Program

    Science.gov (United States)

    2011-06-10

    captain relieved of command after viewing porn on computer,‖ 10 July 2010, http://www.thenewstribune.com/2010/07/ 10/1259108/portland-coast-guard...Coast Guard captain relieved of command after viewing porn on computer,‖ 10 July 2010. http://www.thenewstribune.com/2010/07/ 10/1259108/portland

  3. 29 CFR Appendix B to Subpart B of... - Reprint of U.S. Coast Guard Regulations Referenced in Subpart B, for Determination of Coast Guard...

    Science.gov (United States)

    2010-07-01

    ... Subpart B, for Determination of Coast Guard Authorized Persons B Appendix B to Subpart B of Part 1915... Enclosed Spaces and Other Dangerous Atmospheres in Shipyard Employment Pt. 1915, Subpt. B, App. B Appendix B to Subpart B of Part 1915—Reprint of U.S. Coast Guard Regulations Referenced in Subpart B, for...

  4. Implementing Strategy in a Budget: A Model of the Coast Guard Reserve

    OpenAIRE

    Bromund, Carl Douglas

    1990-01-01

    Approved for public release; distribution is unlimited. This thesis discusses the managment strategy of the Coast Guard Reserve; it examines the formulation and implmentation of strateqy. A model to develop and implement strategy is proposed, which defines the role of the budget in this strategic management process. The recent strategy of the Coast Guard Reserve is analyzed using this model.. This analysis seems to indicate that the Coast Guard Reserve had no explicit strate...

  5. 76 FR 7131 - Safety Zones; Eleventh Coast Guard District Annual Fireworks Events

    Science.gov (United States)

    2011-02-09

    ...-AA00 Safety Zones; Eleventh Coast Guard District Annual Fireworks Events AGENCY: Coast Guard, DHS... permanent safety zones to ensure public safety during annual firework displays at various locations in the... events, delete events that are no longer occurring, add new unlisted annual fireworks events to the...

  6. 75 FR 53195 - Security Zone; U.S. Coast Guard BSU Seattle, Pier 36, Seattle, WA

    Science.gov (United States)

    2010-08-31

    ... its effects on them and participate in the rulemaking process. Small businesses may send comments on... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket No. USCG-2010-0021] RIN 1625-AA87 Security Zone; U.S. Coast Guard BSU Seattle, Pier 36, Seattle, WA AGENCY: Coast Guard, DHS. ACTION...

  7. 33 CFR 165.506 - Safety Zones; Fifth Coast Guard District Fireworks Displays.

    Science.gov (United States)

    2010-07-01

    ... District Fireworks Displays. 165.506 Section 165.506 Navigation and Navigable Waters COAST GUARD... § 165.506 Safety Zones; Fifth Coast Guard District Fireworks Displays. (a) Regulations. The following regulations apply to the fireworks safety zones listed in the Table to § 165.506. (1) The general regulations...

  8. 33 CFR 23.15 - Coast Guard ensign.

    Science.gov (United States)

    2010-07-01

    ... distinctive emblem of the Coast Guard in blue and white is placed with its center on a line with the lower..., the emblem covering a horizontal space of three stripes. [CGFR 57-35, 22 FR 6765, Aug. 22, 1957] ...

  9. 78 FR 8027 - Safety Zone, Coast Guard Exercise Area, Hood Canal, Washington

    Science.gov (United States)

    2013-02-05

    ... 5, 2012. The Coast Guard received zero comments submitted via regulations.gov and received zero... zero comments from the Small Business Administration on this rule. The Coast Guard certifies under 5 U... more in any one year. Though this rule will not result in such an expenditure, we do discuss the...

  10. 46 CFR 159.007-7 - Application for acceptance for production inspections and tests: Coast Guard action.

    Science.gov (United States)

    2010-10-01

    ... and tests: Coast Guard action. 159.007-7 Section 159.007-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL APPROVAL....007-7 Application for acceptance for production inspections and tests: Coast Guard action. (a) From...

  11. EPA Region 1 Coast Guard Jurisdictional Boundary - Polygons

    Data.gov (United States)

    U.S. Environmental Protection Agency — Jurisdictional boundary between EPA and Coast Guard for EPA Region I. Created from 1:100000 USGS DLGs with greater detail drawn from 1:24000 commercial street data...

  12. EPA Region 1 Coast Guard Jurisdictional Boundary - Arcs

    Data.gov (United States)

    U.S. Environmental Protection Agency — Jurisdictional boundary between EPA and Coast Guard for EPA Region I. Created from 1:100000 USGS DLGs with greater detail drawn from 1:24000 commercial street data...

  13. 33 CFR 165.776 - Security Zone; Coast Guard Base San Juan, San Juan Harbor, Puerto Rico

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Security Zone; Coast Guard Base San Juan, San Juan Harbor, Puerto Rico 165.776 Section 165.776 Navigation and Navigable Waters COAST... Guard District § 165.776 Security Zone; Coast Guard Base San Juan, San Juan Harbor, Puerto Rico (a...

  14. 76 FR 66239 - Safety Zones; Fireworks Displays Within the Fifth Coast Guard District

    Science.gov (United States)

    2011-10-26

    ...-AA00 Safety Zones; Fireworks Displays Within the Fifth Coast Guard District AGENCY: Coast Guard, DHS... safety zones established for fireworks displays at various locations within the geographic boundary of... maritime public from the hazards posed by fireworks displays. Entry into or movement within these proposed...

  15. 76 FR 28795 - Privacy Act of 1974; Department of Homeland Security United States Coast Guard-024 Auxiliary...

    Science.gov (United States)

    2011-05-18

    ... 1974; Department of Homeland Security United States Coast Guard-024 Auxiliary Database System of... Security/United States Coast Guard-024 Auxiliary Database (AUXDATA) System of Records.'' This system of...: United States Coast Guard Auxiliary Database (AUXDATA). Security classification: Unclassified. System...

  16. 78 FR 55214 - Annual Marine Events in the Eighth Coast Guard District, Sabine River; Orange, TX

    Science.gov (United States)

    2013-09-10

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 100 [Docket No. USCG-2013-0723] Annual Marine Events in the Eighth Coast Guard District, Sabine River; Orange, TX AGENCY: Coast Guard, DHS... Neches River in Orange, TX from 3 p.m. on September 20, 2013, through 6 p.m. on September 22, 2013. This...

  17. 77 FR 47519 - Annual Marine Events in the Eighth Coast Guard District, Sabine River; Orange, TX

    Science.gov (United States)

    2012-08-09

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 100 [Docket No. USCG-2012-0656] Annual Marine Events in the Eighth Coast Guard District, Sabine River; Orange, TX AGENCY: Coast Guard, DHS... Regulations for the S.P.O.R.T. Power Boat Neches River in Orange, TX from 3 p.m. on September 21, 2012...

  18. 46 CFR 50.10-30 - Coast Guard number.

    Science.gov (United States)

    2010-10-01

    ... boilers and pressure vessels. (c) The Coast Guard number is comprised of the following: (1) Three capital... St. Louis. STB Sturgeon Bay. TAM Tampa. TOL Toledo. VAL Valdez. WNC Wilmington, NC. [CGFR 68-82, 33...

  19. 77 FR 28766 - Eighth Coast Guard District Annual Marine Events and Safety Zones

    Science.gov (United States)

    2012-05-16

    .... SUMMARY: On March 1, 2012, the Coast Guard published a direct final rule, amending and updating its... effect as scheduled. The Coast Guard is also correcting two entries in this rule through technical... event's date, location, and the resulting special local regulation remain the same. The next occurrence...

  20. Elimination of Coast Guard plan review for non-critical engineering systems and cargo barges

    Science.gov (United States)

    1994-06-21

    The purpose of this Circular is to publish policy that provides for the elimination of Coast Guard review and approval of certain engineering system drawings for all vessels as well as structural drawings for Coast Guard inspected non-self propelled ...

  1. 78 FR 77359 - Eighth Coast Guard District Annual Safety Zones; New Year's Eve Celebration/City of Mobile...

    Science.gov (United States)

    2013-12-23

    ...-AA00 Eighth Coast Guard District Annual Safety Zones; New Year's Eve Celebration/City of Mobile; Mobile Channel; Mobile, AL AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard will enforce the City of Mobile New Year's Eve Celebration safety zone in the Mobile Channel, Mobile, AL from...

  2. Redesign of the Advanced Education processes in the United States Coast Guard

    OpenAIRE

    Johnson, Lamar V.; Sanders, Marc F.

    1999-01-01

    The processes used in the operation of the Coast Guard Advanced Education Program have evolved as most business processes that were developed prior to the introduction of information technology. These processes include the selection, management, assignment and tracking of advanced education students. These processes are still fully dependent on physical files and the mail system. The Coast Guard has an information technology infrastructure that supports better processes, however it is not bei...

  3. 33 CFR 173.85 - Fees levied by the Coast Guard.

    Science.gov (United States)

    2010-07-01

    .... 173.85 Section 173.85 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY VESSEL NUMBERING AND CASUALTY AND ACCIDENT REPORTING Issue of Certificate of.... (b) Fees are payable by check or money-order made payable to the “U.S. Coast Guard”; by major credit...

  4. 78 FR 33216 - Temporary Change of Dates for Recurring Marine Event in the Fifth Coast Guard District, Mattaponi...

    Science.gov (United States)

    2013-06-04

    ... 1625-AA08 Temporary Change of Dates for Recurring Marine Event in the Fifth Coast Guard District, Mattaponi Drag Boat Race, Mattaponi River; Wakema, VA AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary change to the enforcement period of special local...

  5. 76 FR 30827 - Temporary Change of Dates for Recurring Marine Event in the Fifth Coast Guard District; Elizabeth...

    Science.gov (United States)

    2011-05-27

    ...-AA08 Temporary Change of Dates for Recurring Marine Event in the Fifth Coast Guard District; Elizabeth River, Norfolk, VA AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard will... various river boat races and a parade during the ``35th Annual Norfolk Harborfest Celebration.'' Special...

  6. 2010 Joint United States-Canadian Program to explore the limits of the Extended Continental Shelf aboard U.S. Coast Guard Cutter Healy--Cruise HLY1002

    Science.gov (United States)

    Edwards, Brian D.; Childs, Jonathan R.; Triezenberg, Peter J.; Danforth, William W.; Gibbons, Helen

    2013-01-01

    In August and September 2010, the U.S. Geological Survey, in cooperation with Natural Resources Canada, Geological Survey of Canada, conducted bathymetric and geophysical surveys in the Beaufort Sea and eastern Arctic Ocean aboard the U.S. Coast Guard Cutter Healy. The principal objective of this mission to the high Arctic was to acquire data in support of a delineation of the outer limits of the U.S. and Canadian Extended Continental Shelf in the Arctic Ocean, in accordance with the provisions of Article 76 of the United Nations Convention on the Law of the Sea. The Healy was accompanied by the Canadian Coast Guard icebreaker Louis S. St-Laurent. The scientific parties on board the two vessels consisted principally of staff from the U.S. Geological Survey (Healy), and the Geological Survey of Canada and the Canadian Hydrographic Service (Louis). The crew also included marine-mammal observers, Native-community observers, ice observers, and biologists conducting research of opportunity in the Arctic Ocean. Despite interruptions necessitated by three medical emergencies, the joint survey proved largely successful. The Healy collected 7,201 trackline-kilometers of swath (multibeam) bathymetry (47,663 square kilometers) and CHIRP subbottom data, with accompanying marine gravity measurements, and expendable bathythermograph data. The Louis acquired 3,673 trackline-kilometers of multichannel seismic (airgun) deep-penetration reflection data along 25 continuous profiles, as well as 34 sonobuoy refraction stations and 9,500 trackline-kilometers of single-beam bathymetry. The coordinated efforts of the two vessels resulted in seismic-reflection-profile data that were of much higher quality and continuity than if the data had been acquired with a single vessel alone. The equipment-failure rate of the seismic equipment aboard the Louis was greatly reduced when the Healy led as the ice breaker. When ice conditions proved too severe to deploy the seismic system, the Louis led

  7. 78 FR 40000 - Eighth Coast Guard District Annual Safety Zones; Riverfront Independence Festival Fireworks; Ohio...

    Science.gov (United States)

    2013-07-03

    ...-AA00 Eighth Coast Guard District Annual Safety Zones; Riverfront Independence Festival Fireworks; Ohio.... SUMMARY: The Coast Guard will enforce a Safety Zone for the Riverfront Independence Festival Fireworks on... navigable waters during the Riverfront Independence Festival Fireworks. During the enforcement period, in...

  8. EPA Region 1 Coast Guard Jurisdictional Boundary - Polygons

    Science.gov (United States)

    Jurisdictional boundary between EPA and Coast Guard for EPA Region I. Created from 1:100000 USGS DLGs with greater detail drawn from 1:24000 commercial street data for Region I.This layer is used to determine which agency will be reponsible in the event of an oil spill.

  9. EPA Region 1 Coast Guard Jurisdictional Boundary - Arcs

    Science.gov (United States)

    Jurisdictional boundary between EPA and Coast Guard for EPA Region I. Created from 1:100000 USGS DLGs with greater detail drawn from 1:24000 commercial street data for Region I.This layer is used to determine which agency will be reponsible in the event of an oil spill.

  10. Coast Guard Proceedings. Volume 71, Number 1, Spring 2014

    Science.gov (United States)

    2014-01-01

    Canada. Rescue aircrew from Coast Guard Air Station Traverse City, Mich., conduct helicopter hoist training with the crew of the Canadian Coast...barge about 70-feet forward of the towing vessel — causing the barge to split nearly in half and dump thousands of gallons of oil into the...on the impeller B. double the liquid velocity through the pump when compared to a single volute C. reduce the hydraulic end thrust D. provide the

  11. U.S. Coast Guard (USCG) Maritime Differential GPS (DGPS) Locations

    Data.gov (United States)

    Department of Homeland Security — NAVCEN operates the Coast Guard Maritime Differential GPS (DGPS) Service and the developing Nationwide DGPS Service (NDGPS), consisting of two control centers and 86...

  12. 77 FR 35855 - Safety Zone, Temporary Change for Recurring Fifth Coast Guard District Fireworks Displays...

    Science.gov (United States)

    2012-06-15

    ... 1625-AA00 Safety Zone, Temporary Change for Recurring Fifth Coast Guard District Fireworks Displays; Northwest Harbor (East Channel) and Tred Avon River, MD AGENCY: Coast Guard, DHS. ACTION: Temporary final... Channel), Patapsco River, and Tred Avon River during the event. DATES: This rule is effective from 8 p.m...

  13. Improved Coast Guard Communications Using Commercial Satellites and WWW Technology

    Science.gov (United States)

    1997-06-18

    Information collection and distribution are essential components of most Coast Guard missions. However, information needs have typically outpaced the ability of the installed communications systems to meet those needs. This mismatch leads to reduced ...

  14. 77 FR 31183 - Safety Zone, Temporary Change for Recurring Fireworks Display Within the Fifth Coast Guard...

    Science.gov (United States)

    2012-05-25

    ...-AA00 Safety Zone, Temporary Change for Recurring Fireworks Display Within the Fifth Coast Guard District, Pamlico River and Tar River; Washington, NC AGENCY: Coast Guard, DHS. ACTION: Temporary final... is intended to restrict vessel traffic in a portion of the Pamlico River and Tar River near...

  15. 76 FR 66933 - Privacy Act of 1974; Department of Homeland Security U.S. Coast Guard DHS/USCG-014 Military Pay...

    Science.gov (United States)

    2011-10-28

    ... 1974; Department of Homeland Security U.S. Coast Guard DHS/USCG--014 Military Pay and Personnel System... Security U.S. Coast Guard--014 Military Pay and Personnel System of Records.'' This system of records allows the Department of Homeland Security U.S. Coast Guard to collect and maintain records regarding pay...

  16. 75 FR 79956 - Protection for Whistleblowers in the Coast Guard

    Science.gov (United States)

    2010-12-21

    ... constitutes evidence of sexual harassment and discrimination, among other subjects. Additionally, changes to... (including sexual harassment or discrimination), gross mismanagement, a gross waste of funds or other... Force, Marine Corps, and Coast Guard''). Section 1034 covers allegations and disclosures of sexual...

  17. US Coast Guard national spill response resource inventory

    International Nuclear Information System (INIS)

    Giraitis, D.M.

    1993-01-01

    The Oil Pollution Act of 1990 (OPA 90) mandated the establishment of a National Response Unit, now renamed the National Strike Force Coordination Center (NSFCC). Among the duties OPA 90 assigned to this new Coast Guard unit was to compile and maintain a comprehensive list of spill removal resources, personnel, and equipment that is available to Federal and State agencies and to the public. The Coast Guard's Research and Development Center has been developing this project, the Response Resource Inventory (RRI), for one year. The RRI is expected to be operational, with resource data from industry in the data base, by the time of the International Oil Spill Conference in March 1993. The RRI will contain data on skimmers, specialized oil recovery vessels, oil/water separators, dispersants and delivery systems, etc. Previous attempts to maintain a national data base of these response resources, including an earlier Coast Guard system called the Spill Cleanup Equipment Inventory System (SKIM), fell into disuse for a number of reasons. Inaccuracies caused by inadvertent double counting of equipment and outdated information coupled with difficulties in accessing the information were common shortfalls of early systems. During the development of the RRI, user-group meetings were held to determine system requirements and study the failures of previous systems. Methods of obtaining and entering data were a major concern during RRI development. A data collection system that supplies the resource holder with a DOS-formatted diskette containing a collection program will be used. The program will make extensive use of pick lists to minimize the data entry burden on the resource holder and maintain standard entries. When the program is completed, the diskette will be mailed to the NSFCC, where the data will be transferred quickly to the RRI data base. Easy access to the data for the public and industry will be afforded mainly through a computer bulletin board

  18. 33 CFR 165.117 - Regulated Navigation Areas, Safety and Security Zones: Deepwater Ports, First Coast Guard District.

    Science.gov (United States)

    2010-07-01

    ..., Safety and Security Zones: Deepwater Ports, First Coast Guard District. 165.117 Section 165.117... Limited Access Areas First Coast Guard District § 165.117 Regulated Navigation Areas, Safety and Security... section are designated as regulated navigation areas. (2) Safety and security zones. All waters within a...

  19. 33 CFR 150.20 - How many copies of the operations manual must be given to the Coast Guard?

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false How many copies of the operations manual must be given to the Coast Guard? 150.20 Section 150.20 Navigation and Navigable Waters COAST... § 150.20 How many copies of the operations manual must be given to the Coast Guard? The draft operations...

  20. 33 CFR 165.161 - Safety zones: Coast Guard Captain of the Port New York annual fireworks displays.

    Science.gov (United States)

    2010-07-01

    ... of the Port New York annual fireworks displays. 165.161 Section 165.161 Navigation and Navigable... Coast Guard District § 165.161 Safety zones: Coast Guard Captain of the Port New York annual fireworks displays. (a) Safety zones. The following areas are designated safety zones: (1) Bar Beach fireworks...

  1. 77 FR 37318 - Eighth Coast Guard District Annual Safety Zones; Sound of Independence; Santa Rosa Sound; Fort...

    Science.gov (United States)

    2012-06-21

    ...-AA00 Eighth Coast Guard District Annual Safety Zones; Sound of Independence; Santa Rosa Sound; Fort... Coast Guard will enforce a Safety Zone for the Sound of Independence event in the Santa Rosa Sound, Fort... during the Sound of Independence. During the enforcement period, entry into, transiting or anchoring in...

  2. U.S. Coast Guard Posture Statement With 2009 Budget in Brief

    Science.gov (United States)

    2008-02-01

    projects, new Response Boat- Medium vessels, and improvements to our command, control, communications, and National Distress and Response System. It...to the Guardian Ethos cultivated over 217 years, the Coast Guard responded to over 27,000 Search and Rescue cases and saved over 5,000 lives in 2007...Transportation Security Administration ( TSA ) Visual Intermodal Protection and Response (VIPR) Teams, the Coast Guard’s newly- formed Deployable Operations Group

  3. The Defense Message System and the U.S. Coast Guard

    Science.gov (United States)

    1992-06-01

    these mail services, the Internet also provides a File Transfer Protocol (FTP) and remote login between host computers (TELNET) capabilities. 17 [Ref...the Joint Maritime Intelligence Element (JMIE), Zincdust, and Emerald . [Ref. 27] 4. Secure Data Network The Coast Guard’s Secure Data Network (SDN

  4. The Coast Guard Intelligence Program Enters the Intelligence Community. A Case Study of Congressional Influence on Intelligence Community Evolution

    National Research Council Canada - National Science Library

    Wirth, Kevin E

    2007-01-01

    .... Although the United States Coast Guard has utilized intelligence capabilities since the service's inception in 1790, the Coast Guard was not included as a formal member of the Intelligence Community until December 2002. Mr...

  5. 76 FR 53329 - Eleventh Coast Guard District Annual Marine Events

    Science.gov (United States)

    2011-08-26

    .... SUMMARY: The Coast Guard is updating and consolidating the list of marine events occurring annually within... not currently reflect changes in actual dates and other required information. The effects of these... location that offers a better vantage point to monitor the event. The location of the PATCOM may also be...

  6. 46 CFR 159.005-7 - Preapproval review: Coast Guard action.

    Science.gov (United States)

    2010-10-01

    ... Section 159.005-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT... may be conducted. (2) If the Commandant determines from the application for approval that the... under § 159.005-13 can be taken. (c) An item of equipment or material that does not meet all of the...

  7. 76 FR 35169 - Validation of Merchant Mariners' Vital Information and Issuance of Coast Guard Merchant Mariner's...

    Science.gov (United States)

    2011-06-16

    ... locations around the nation before publication of the interim rule. Given the urgency at the time, the Coast... rule because new security requirements make sense in today's world. The Coast Guard thanks the...

  8. The Modeling of Factors That Influence Coast Guard Manpower Requirements

    Science.gov (United States)

    2014-12-01

    applications, and common data warehouses needed to fully develop an effective and efficient manpower requirements engineering and management program. The... manpower requirements determination ensures a ready force, and safe and effective mission execution. Shortage or excess of manpower is the catalyst...FACTORS THAT INFLUENCE COAST GUARD MANPOWER REQUIREMENTS by Kara M. Lavin December 2014 Thesis Advisor: Ronald E. Giachetti Co-Advisor

  9. 77 FR 23119 - Annual Marine Events in the Eighth Coast Guard District, Dauphin Island Race; Mobile Bay; Mobile, AL

    Science.gov (United States)

    2012-04-18

    ... Marine Events in the Eighth Coast Guard District, Dauphin Island Race; Mobile Bay; Mobile, AL AGENCY... Special Local Regulations for the Dauphin Island Race in the Mobile Bay, Mobile, AL from 9 a.m. until 5 p... Captain of the Port (COTP) Mobile or the designated Coast Guard Patrol Commander. DATES: The regulations...

  10. Intranet Prototype for the United States Coast Guard Electronic Systems Support Unit Alameda

    National Research Council Canada - National Science Library

    Benhart, Ralph

    1998-01-01

    ...) Alameda, a small Coast Guard command. To accomplish this task, this thesis will introduce the concept of Intranet technology, portray the efforts required to create an Intranet, and then discuss the benefits associated with Intranet use...

  11. A functional intranet for the United States Coast Guard Unit

    OpenAIRE

    Hannah, Robert Todd.

    1998-01-01

    Approved for public release; distribution in unlimited. This thesis describes the complete development process of a friendly functional Intranet for an operational United States Coast Guard (USCG) electronic Support Unit (ESU) in Alameda, California. The final product is suitable for immediate use. It may also be used as a prototype for future Intranet development efforts. The methodology used to develop a finished, working product provides the core subject matter for this thesis. The disc...

  12. 33 CFR 165.168 - Safety Zones; Coast Guard Captain of the Port New York Fireworks Displays.

    Science.gov (United States)

    2010-07-01

    ... of the Port New York Fireworks Displays. 165.168 Section 165.168 Navigation and Navigable Waters... Guard District § 165.168 Safety Zones; Coast Guard Captain of the Port New York Fireworks Displays. (a... Upper New York Bay within a 360-yard radius of the fireworks barge in approximate position 40°41′16.5″ N...

  13. Marine Hydrokinetic Resource Assessment for Domestic Army, Air Force, and Coast Guard Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Robichaud, Robi J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ingram, Michael [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-04-24

    NREL/DOE undertook a study for the US Army, Coast Guard and Air Force to investigate the potential for marine hydrokinetic (MHK) devices to meet the energy load at coastal bases in the future as MHK technology evolves. A wide range of data from tidal and wave, environmental, shipping, etc. databases were used to screen the DOD bases. A series of scoring algorithms were developed to facilitate site review to lead to eventual down select for more detailed, site specific bathymetric tidal resource evaluation. The Army's Camp Edwards, MA and the Coast Guard's Training Center Cape May, NJ (TRACEN Cape May) were selected and the Georgia Institute of Technology performed the analyses. An NREL/DOE MHK team visited the bases to further discuss with the base personnel MHK technology's potential for providing power to the bases in the future and frame the potential impact to existing power systems.

  14. 78 FR 69007 - Special Local Regulations; Eleventh Coast Guard District Annual Marine Events

    Science.gov (United States)

    2013-11-18

    ... regarding our public dockets in the January 17, 2008, issue of the Federal Register (73 FR 3316). 4. Public...: ``ITU World Triathlon'' occurring late April or early May at Bonita Cove and Ventura Cove in Mission Bay... participants and an exact geographical description of the areas are published by the Eleventh Coast Guard...

  15. 78 FR 53675 - Eighth Coast Guard District Annual Safety Zones; Boomsday Festival; Tennessee River 646.0-649.0...

    Science.gov (United States)

    2013-08-30

    ...-AA00 Eighth Coast Guard District Annual Safety Zones; Boomsday Festival; Tennessee River 646.0-649.0... Guard will enforce a Safety Zone for the Boomsday Festival Fireworks on the Tennessee River 646.0-649.0... Festival Fireworks. During the enforcement period, entry into, transiting or anchoring in the Safety Zone...

  16. Realigning Coast Guard Enhanced Maritime Capabilities: A Lesson Learned from the U.S. Special Operations Command

    National Research Council Canada - National Science Library

    Poulin, Steven D

    2005-01-01

    .... The Coast Guard faces major challenges in executing its responsibilities and must leverage the capabilities of its specially trained boarding teams, small boat security forces, and hazardous materials response teams...

  17. Enhancing Recruitment and Retention of Volunteers in the U.S. Coast Guard Auxiliary

    Science.gov (United States)

    2008-12-01

    Boomers, Generation X, and Generation Y ( Millennials ), opt to continue working or pursue volunteer efforts with other volunteer organizations.180...parliamentary system Predominant Religion Christianity Judaism Predominant Language English Hebrew Sponsoring Agency U.S. Coast Guard – Military Israel...sustainable, effective, and well-trained membership. However, the glaring differences in geography, religion , culture, language, historical

  18. Contingency-Focused Financial Management and Logistics for the U.S. Coast Guard

    Science.gov (United States)

    2008-12-01

    for the Coast Guard and may assist with determining which business and operational areas are most in jeopardy of failure when stressed . Some areas... telecommuting policies, practices and organizational culture issues to ensure that personnel are experienced in telecommuting . It would be detrimental...and a crippling strain on IT staffs for logistics and financial management personnel to first attempt telecommuting in the days following a crisis

  19. 77 FR 23119 - Annual Marine Events in the Eighth Coast Guard District, Smoking the Sound; Biloxi Ship Channel...

    Science.gov (United States)

    2012-04-18

    ...The Coast Guard will enforce Special Local Regulations for the Smoking the Sound boat races in the Biloxi Ship Channel, Biloxi, MS from 8 a.m. until 6 p.m. on April 28 and April 29, 2012. This action is necessary for the safeguard of participants and spectators, including all crews, vessels, and persons on navigable waters during the Smoking the Sound boat races. During the enforcement period, entry into, transiting or anchoring in the regulated area is prohibited to all vessels not registered with the sponsor as participants or official patrol vessels, unless specifically authorized by the Captain of the Port (COTP) Mobile or the designated Coast Guard Patrol Commander.

  20. Marine Information for Safety and Law Enforcement (MISLE) Casualty and Pollution Incidents, Guam, 2015, US Coast Guard

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Marine Casualty and Pollution Data files provide details about marine casualty and pollution incidents investigated by Coast Guard Offices throughout the United...

  1. Evolution of the US Coast Guard's oil identification system

    International Nuclear Information System (INIS)

    Hendrick, M.S.; Reilly, T.R.

    1993-01-01

    The U.S. Coast Guard, tasked with the development of open-quotes procedures and techniques to be employed in identifying ... oil and hazardous substances . . . open-quotes by the 1972 Federal Water Pollution Control Act (FWPCA), developed the Oil Identification System (OIS). The OIS was based on four analytical laboratory techniques: infrared (IR) and fluorescence (FL) spectroscopy, gas chromatography (GC), and thin- layer chromatography (TLC). A Central Oil Identification Laboratory (COIL) began operation in 1977, and field laboratories (FOILS) using two of the techniques (FL and TLC) were established in many Marine Safety Offices to screen possible sources. Development of the OIS was documented in two formal reports, in 1974 and 1977. The current implementation of the OIS at COIL is still based on a multimethod approach, but it incorporates today's state-of-the-art technology and responds to the current needs of the Coast Guard. One pervasive force for change has been the affordability of computers. The rapid development of computerized instruments has resulted in improvements in the performance, ruggedness, and prices of analytical laboratory equipment. All the instruments in the authors' laboratory at the present time are interfaced to or have internal computerized data-handling systems. Fourier-transform infrared spectrometers (FTIR) have replaced older mechanically scanning, dispersive IR instruments. High-performance liquid chromatography (HPLC) has replaced TLC completely. A gas chromatography/mass spectrometer (GC/MS), a room-size research tool in 1977, sits on a benchtop in the laboratory today, and a standard method for oil identification is being developed for this technique. Laboratory strategies are now based on finding the most efficient use of resources, as rapid response times are not necessary in all cases. It may also be possible in the near future to resume field testing

  2. U.S. Coast Guard oil spill remote sensing : preliminary laser fluorosensor studies

    International Nuclear Information System (INIS)

    Fant, J.W.; Hansen, K.A.

    2005-01-01

    Maritime oil spill events are costly and damaging to the environment. Nearly 40 per cent of ship sourced spills occurring in the last 25 years have involved medium to heavy grade fuel oils. There is, therefore, an immediate need to detect and track subsurface oil spills, particularly as heavy and weathered oil can sink below the surface during a spill and often becomes problematic to detect, track and recover. The United States Coast Guard has limited capabilities to detect and track an oil spill, especially in poor weather. This paper discussed research and assessment efforts focused on laser fluorosensor technology. Testing of 3 independent laser fluorosensing systems was conducted to determine sensing depth capabilities and sensor shortcomings in ideal conditions. Studies included the detection and collection of laser induced fluorescence spectra at the surface as well as at various depths down to 5 metres in both daylight and night-time environments. The sensors were tested to assess their capabilities to meet the Coast Guard's oil sensor and operational requirements. Three sensors were tested by the Coast Guard at the Ohmsett National Oil Response Test Facility: the Airborne Oceanographic Lidar (AOL-3), a light detection and ranging system (lidar) to measure biological and physical oceanographic features developed by the National Aeronautics and Space Administration (NASA); the Fluorescent Lidar Spectrometer (FLS) lidar, developed by Laser Diagnostic Instruments International Inc. of Canada; and the Ultraviolet Biological Trigger Lidar, developed by Science and Engineering Services, Inc. (SESI) to detect and discriminate bio-warfare agent aerosols for the United States Army. The 3 fluorometers exhibited the ability to detect oil both on and below the water's surface. There were differences in the peak locations in the spectrum for the same oils among the lasers tested. It was also noted that all the systems had the capability of detecting oil in a night

  3. 76 FR 35173 - Validation of Merchant Mariners' Vital Information and Issuance of Coast Guard Merchant Mariner's...

    Science.gov (United States)

    2011-06-16

    ...-AA81 Validation of Merchant Mariners' Vital Information and Issuance of Coast Guard Merchant Mariner's... SUPPLEMENTARY INFORMATION section below for instructions on submitting comments. FOR FURTHER INFORMATION CONTACT... Manager, Docket Operations, telephone 202-366-9826. SUPPLEMENTARY INFORMATION: Request for Comments If you...

  4. 75 FR 23212 - Security Zone; U.S. Coast Guard BSU Seattle, Pier 36, Seattle, WA

    Science.gov (United States)

    2010-05-03

    ... reason: Vessel traffic can pass safely around the security zone. If you think that your business... its effects on them and participate in the rulemaking. If the rule would affect your small business... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket No. USCG-2010-0021] RIN 1625...

  5. 77 FR 31515 - Validation of Merchant Mariners' Vital Information and Issuance of Coast Guard Merchant Mariner's...

    Science.gov (United States)

    2012-05-29

    ...-AA85 Validation of Merchant Mariners' Vital Information and Issuance of Coast Guard Merchant Mariner's...-2004-17455 in the ``Enter Keyword or ID'' box, and then clicking ``Search.'' FOR FURTHER INFORMATION...-9826. SUPPLEMENTARY INFORMATION: Table of Contents for Preamble I. Abbreviations II. Regulatory History...

  6. Organizational Identity: Positioning The Coast Guard for Future Success In An Evolving Environment

    Science.gov (United States)

    2016-12-01

    Yamacraw in 1922 and then later put them to music while serving in Alaska in 1927. The lyrics changed slightly in 1943 and 1969. The Coast Guard website...multimission maritime agency.”400 Lieutenant commander (LCDR) D.C. Baldinelli reflected on the transfer to DHS in a 2002 essay as another organization...327. 118 The essay suggests that there may be angst among personnel about the transformation. Baldinelli stated that the move was likely to

  7. United States Coast Guard Antisubmarine Warfare (ASW) in the Maritime Defense Zone (MDZ) - A Strategic Approach

    Science.gov (United States)

    1989-03-01

    RIC ILE COPY AIR WAR COLLGE REEAC R~pCR UNITED STATES COAST GUARD ANTISUBMARINE WARFARE (ASW) IN THE MARITIME DEFENSE ZONE (MDZ) -A STRATEGIC...going to perform in these MDZs. Those tasks identified so far include: port and coastal physical security & preventive safety, mine warfare

  8. Measurements of cutter forces and cutter temperature of boring machine in Aespoe Hard Rock Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Z.X.; Kou, S.Q.; Lindqvist, P.-A. [Luleaa Univ. of Technology (Sweden)

    2001-04-01

    This report presents both the testing methods used and the testing results obtained for cutter forces and cutter temperature during field boring in Aespoe Hard Rock Laboratory. In order to estimate the strains induced by cutter forces in the cutter shaft and choose proper transducers, first a numerical simulation was performed. The simulation results indicated that the cutter forces should be measurable by ordinary strain gauges. Furthermore, an independent three-direction loading system for laboratory calibration was set up to solve force-coupling problems appearing in field measurements. By means of the established measuring system, which was proved successfully in the laboratory, the normal forces, tangential forces, and side forces of two button cutters in the boring machine were measured in the field. In addition, the temperature in the shaft of the front cutter was measured. After the measurements of the cutter forces and cutter temperature, rock core samples were taken from the bottom and the wall of the testing borehole. Then the samples were cut, polished, and examined by means of the Scanning Electron Microscope (SEM). After that, the lengths of major cracks induced by the cutters in the rock samples were measured, and an approximate relationship between the length of the medium cracks and the relevant cutter forces was obtained. This relationship was compared with the theoretical relationship established before. Finally, according to the measured results, the cracked zones around the borehole were described. The results show that: (1) there are two kinds of cracked zones: one in the borehole wall and the other in the bottom of the borehole. The depth of the cracked zone in the borehole bottom is much larger than that in the borehole wall because the maximum normal force of the front cutter is always much larger than that of the gauge cutter. (2) Each cracked zone includes a densely cracked zone and all the longest medium cracks caused by mechanical

  9. Tubing Cutter is Activated Hydraulically

    Science.gov (United States)

    Mcsmith, D. G.; Richardson, J. I.

    1983-01-01

    Hydraulically-actuated tubing cutter severs tubing when operator squeezes handle grip. "Gooseneck" extension enables cutter to be used in areas where accessiblity is limited. Cutter has potential as flight-line tool and is useful in automobile and fire rescue work.

  10. 77 FR 37319 - Safety Zone for Fifth Coast Guard District Fireworks Display Pasquotank River; Elizabeth City, NC

    Science.gov (United States)

    2012-06-21

    ...-AA00 Safety Zone for Fifth Coast Guard District Fireworks Display Pasquotank River; Elizabeth City, NC... the Pasquotank River, Elizabeth City, North Carolina. The fireworks display ordinarily originated from... vessel traffic in a portion of the Pasquotank River, Elizabeth City, North Carolina, during the event...

  11. The comparative analysis of rocks' resistance to forward-slanting disc cutters and traditionally installed disc cutters

    Science.gov (United States)

    Zhang, Zhao-Huang; Fei, Sun; Liang, Meng

    2016-08-01

    At present, disc cutters of a full face rock tunnel boring machine are mostly mounted in the traditional way. Practical use in engineering projects reveals that this installation method not only heavily affects the operation life of disc cutters, but also increases the energy consumption of a full face rock tunnel boring machine. To straighten out this issue, therefore, a rock-breaking model is developed for disc cutters' movement after the research on the rock breaking of forward-slanting disc cutters. Equations of its displacement are established based on the analysis of velocity vector of a disc cutter's rock-breaking point. The functional relations then are brought forward between the displacement parameters of a rock-breaking point and its coordinate through the analysis of micro displacement of a rock-breaking point. Thus, the geometric equations of rock deformation are derived for the forward-slanting installation of disc cutters. With a linear relationship remaining between the acting force and its deformation either before or after the leap breaking, the constitutive relation of rock deformation can be expressed in the form of generalized Hooke law, hence the comparative analysis of the variation in the resistance of rock to the disc cutters mounted in the forward-slanting way with that in the traditional way. It is discovered that with the same penetration, strain of the rock in contact with forward-slanting disc cutters is apparently on the decline, in other words, the resistance of rock to disc cutters is reduced. Thus wear of disc cutters resulted from friction is lowered and energy consumption is correspondingly decreased. It will be useful for the development of installation and design theory of disc cutters, and significant for the breakthrough in the design of full face rock tunnel boring machine.

  12. Tubing cutter for tight spaces

    Science.gov (United States)

    Girala, A. S.

    1980-01-01

    Cutter requires few short swings of handle to rotate its cutting edge full 360 around tube. It will cut tubing installed in confined space that prevents free movement of conventional cutter. Cutter is snapped onto tube and held in place by spring-loaded clamp. Screw ratchet advances cutting wheel.

  13. U.S. Coast Guard Marine Safety Office Zones in Louisiana, Geographic NAD83, LOSCO (2000) [mso_zones_LOSCO_1999

    Data.gov (United States)

    Louisiana Geographic Information Center — This is a polygon dataset delineating the boundaries of the three U.S. Coast Guard Marine Safety Office (MSO) zones that encompass the state of Louisiana. The MSO...

  14. Atlantic Canada, on watch : Canadian Coast Guard sails to rescue of oiled wildlife

    Energy Technology Data Exchange (ETDEWEB)

    Reid, W.

    1999-08-02

    The impact that tanker ships have left on the marine ecosystem on Newfoundland`s south coast was discussed. Tankers and container ships have sometimes discharged leftover bunker-C fuel before entering the St. Lawrence Seaway to save on cleaning services. It is estimated that 60,000 to 100,000 of the 30 million seabirds which reside or migrate through the ecological reserve around St. Mary`s Bay, die each year from the effects of oil. Victims are mostly puffins, seagulls and murres. This paper discussed the involvement of the Canadian Coast Guard in the Prevention of Oiled Wildlife (POW) project. POW has compared British Columbia`s shipping practices with those of Newfoundland. Although crude oil shipments along the B.C. coast exceed 250 million barrels annually, seabirds are not being oiled by passing tankers. It was suggested that in order to change attitudes in Atlantic waters, the maximum fine of $1 million against offenders should be imposed. So far, the highest penalty levied by Transport Canada has been $30,000. It was argued that this is not a significant deterrent for most polluters.

  15. Atlantic Canada, on watch : Canadian Coast Guard sails to rescue of oiled wildlife

    International Nuclear Information System (INIS)

    Reid, W.

    1999-01-01

    The impact that tanker ships have left on the marine ecosystem on Newfoundland's south coast was discussed. Tankers and container ships have sometimes discharged leftover bunker-C fuel before entering the St. Lawrence Seaway to save on cleaning services. It is estimated that 60,000 to 100,000 of the 30 million seabirds which reside or migrate through the ecological reserve around St. Mary's Bay, die each year from the effects of oil. Victims are mostly puffins, seagulls and murres. This paper discussed the involvement of the Canadian Coast Guard in the Prevention of Oiled Wildlife (POW) project. POW has compared British Columbia's shipping practices with those of Newfoundland. Although crude oil shipments along the B.C. coast exceed 250 million barrels annually, seabirds are not being oiled by passing tankers. It was suggested that in order to change attitudes in Atlantic waters, the maximum fine of $1 million against offenders should be imposed. So far, the highest penalty levied by Transport Canada has been $30,000. It was argued that this is not a significant deterrent for most polluters

  16. Human Factors in Coast Guard Computer Security - An Analysis of Current Awareness and Potential Techniques to Improve Security Program Viability

    National Research Council Canada - National Science Library

    Whalen, Timothy

    2001-01-01

    .... This thesis attempts to identify both the susceptibility of Coast Guard information systems to human factors-based security risks and possible means for increasing user awareness of those risks...

  17. The Feasibility of Care Management in Coast Guard Healthcare Facilitate: A Contingency Theory Perspective and Analysis of Organizational Culture

    National Research Council Canada - National Science Library

    Allen, John G

    2005-01-01

    .... The Program's role in supporting Coast Guard missions changes as mission priorities change. Looking at the environment in terms of contingency theory, the Program must find the "right fit" for adapting to this ever-changing environment...

  18. 75 FR 748 - Special Local Regulation for Marine Events; Recurring Marine Events in the Fifth Coast Guard...

    Science.gov (United States)

    2010-01-06

    ... recurring marine events within the Fifth Coast Guard District. These regulations make minor changes to the... includes but is not limited to sail boat regattas, boat parades, power boat racing, swimming events, crew racing, and sail board racing. Under figure 2-1, paragraph (34)(h), of the Instruction, an environmental...

  19. 77 FR 31493 - Eighth Coast Guard District Annual Marine Events and Safety Zones; Billy Bowlegs Pirate Festival...

    Science.gov (United States)

    2012-05-29

    ... Bowlegs Pirate Festival; Santa Rosa Sound; Ft. Walton Beach, FL AGENCY: Coast Guard, DHS. ACTION: Notice... Safety Zone for the Billy Bowlegs Pirate Festival in the Santa Rosa Sound, Ft. Walton Beach, FL on June 1... crews, vessels, and persons on navigable waters during the Billy Bowlegs Pirate Festival. During the...

  20. U.S. Coast Guard Pollution Abatement Program : A Preliminary Report on the Emissions Testing of Boat Diesel Engines

    Science.gov (United States)

    1973-11-01

    The exhaust emission concentrations from three GM6-71's and a Cummins VT-350 diesel engines were measured on a dynamometer as a function of engine load. The GM6-71 engines were newly rebuilt by the Coast Guard; the Cummins Engine was in used conditio...

  1. Coast Guard Cutter Procurement: Background and Issues for Congress

    Science.gov (United States)

    2016-09-16

    timing of follow-on testing or the actions to be taken in response to the findings. Without a definite time frame DHS risks encountering the same...increased tourism , the presence of foreign assets, and commerce, as well as long term resource development. (Pages 83-85) FY2017 National Defense

  2. Atlantic Canada, on watch : Canadian Coast Guard sails to rescue of oiled wildlife

    Energy Technology Data Exchange (ETDEWEB)

    Reid, W

    1999-08-02

    The impact that tanker ships have left on the marine ecosystem on Newfoundland's south coast was discussed. Tankers and container ships have sometimes discharged leftover bunker-C fuel before entering the St. Lawrence Seaway to save on cleaning services. It is estimated that 60,000 to 100,000 of the 30 million seabirds which reside or migrate through the ecological reserve around St. Mary's Bay, die each year from the effects of oil. Victims are mostly puffins, seagulls and murres. This paper discussed the involvement of the Canadian Coast Guard in the Prevention of Oiled Wildlife (POW) project. POW has compared British Columbia's shipping practices with those of Newfoundland. Although crude oil shipments along the B.C. coast exceed 250 million barrels annually, seabirds are not being oiled by passing tankers. It was suggested that in order to change attitudes in Atlantic waters, the maximum fine of $1 million against offenders should be imposed. So far, the highest penalty levied by Transport Canada has been $30,000. It was argued that this is not a significant deterrent for most polluter00.

  3. 46 CFR 153.15 - Conditions under which the Coast Guard issues a Certificate of Inspection or Certificate of...

    Science.gov (United States)

    2010-10-01

    ... Certificate of Inspection required under § 153.900 for a United States ship to carry a hazardous material or... Certificate of Inspection or Certificate of Compliance. 153.15 Section 153.15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED...

  4. Multicylinder Diesel Engine Tests with Unstabilized Water-in-Fuel Emulsions

    Science.gov (United States)

    1981-06-01

    Two diesel engines representative of the four-stroke cycle and two-stroke cycle main propulsion units installed in U.S. Coast Guard WPB class cutters were operated in a test environment in an attempt to demonstrate significant fuel savings associated...

  5. 76 FR 49494 - Privacy Act of 1974; Department of Homeland Security United States Coast Guard DHS/USCG-027...

    Science.gov (United States)

    2011-08-10

    ... destroyed when two years old (SSIC 1500 Item 17a, (NC1-26-80-4, item 338j(1)) and 17b (NC1-26-80-4, item... for appointment in the Coast Guard Reserve are destroyed when one year old (SSIC 100, Item 3b, NC1-26... performance; Advertising responses; Applicant initiated inquiries; Congressional or special interests...

  6. Dome-shaped PDC cutters drill harder rock effectively

    International Nuclear Information System (INIS)

    Moran, D.P.

    1992-01-01

    This paper reports that rock mechanics and sonic travel time log data indicate that bits with convex-shaped polycrystalline diamond compact (PDC) cutters can drill harder rock formations than comparable bits with flat PDC cutters. The Dome-shaped cutters have drilled carbonate formations with sonic travel times as small as 50 μsec/ft, compared to the standard cutoff of 75 μsec/ft for flat PCD cutters. Recent field data from slim hole wells drilled in the Permian basin have shown successful applications of the 3/8-in. Dome cutter in the Grayburg dolomite with its sonic travel times as low as 50-55 μsec/ft and compressive strengths significantly greater than the standard operating range for PDC bit applications. These field data indicate that the Dome cutters can successfully drill hard rock. The convex cutter shape as good impact resistance, cuttings removal, heat dissipation, and wear resistance

  7. DOD and Coast Guard: Actions Needed to Increase Oversight and Management Information on Hazing Incidents Involving Servicemembers

    Science.gov (United States)

    2016-02-01

    of passage can instill esprit de corps and loyalty and are included in many traditions throughout DOD and the Coast Guard. However, at times these...of passage can be effective tools to instill esprit de corps and loyalty among servicemembers and are included in many traditions throughout the...tricks; threatening violence or bodily harm; striking; branding ; shaving; painting; or forcing or requiring the consumption of food, alcohol, drugs

  8. 46 CFR 108.223 - Guards on exposed equipment.

    Science.gov (United States)

    2010-10-01

    ... have hand covers, guards, or rails installed on all belts, gears, shafts, pulleys, sprockets, spindles... 46 Shipping 4 2010-10-01 2010-10-01 false Guards on exposed equipment. 108.223 Section 108.223 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN...

  9. Avionics system design for requirements for the United States Coast Guard HH-65A Dolphin

    Science.gov (United States)

    Young, D. A.

    1984-01-01

    Aerospatiale Helicopter Corporation (AHC) was awarded a contract by the United States Coast Guard for a new Short Range Recovery (SRR) Helicopter on 14 June 1979. The award was based upon an overall evaluation of performance, cost, and technical suitability. In this last respect, the SRR helicopter was required to meet a wide variety of mission needs for which the integrated avionics system has a high importance. This paper illustrates the rationale for the avionics system requirements, the system architecture, its capabilities and reliability and its adaptability to a wide variety of military and commercial purposes.

  10. Modeling an HF NVIS Towel-Bar Antenna on a Coast Guard Patrol Boat. A Comparison of WIPL-D and the Numerical Electromagnetics Code (NEC)

    National Research Council Canada - National Science Library

    Mora, Darla; Weiser, Christopher; McKaughan, Michael

    2005-01-01

    A Coast Guard patrol boat high-frequency (HF) near-vertical incident skywave (NVIS) antenna is selected as a test case to compare the electromagnetic modeling programs Numerical Electromagnetics Code, NEC and WIPL-D code...

  11. A Simulation-Based Analysis of the Impact of In-Sourcing a Major Process Element on the Coast Guard HH-60J Depot Maintenance Process

    National Research Council Canada - National Science Library

    Vigus, Steven

    2003-01-01

    Leaders at the United States Coast Guard's Aircraft Repair and Service Center (ARSC) in Elizabeth City, North Carolina recently formalized their planning and analysis functions by adding a dedicated branch to their command structure...

  12. A Wear Rule and Cutter Life Prediction Model of a 20-in. TBM Cutter for Granite: A Case Study of a Water Conveyance Tunnel in China

    Science.gov (United States)

    Liu, Quansheng; Liu, Jianping; Pan, Yucong; Zhang, Xiaoping; Peng, Xingxin; Gong, Qiuming; Du, Lijie

    2017-05-01

    Disc cutter wear is one of the comprehensive results of the rock-machine interaction in tunnel boring machine (TBM) tunneling. The replacement of the disc cutter is a time-consuming and costly activity that can significantly reduce the TBM utilization ( U) and advance rate (AR), and has a major effect on the total time and cost of TBM tunneling projects. Therefore, the importance of predicting the cutter life accurately can never be overemphasized. Most cutter wear prediction models are only suitable for 17-in. or smaller disc cutters. However, use of large-diameter disc cutters has been an irresistible trend for large-section hard rock TBMs. This study attempts to reveal the genuine wear rule of a 20-in. disc cutter and develop a new empirical model for predicting the cutter life in granite based on field data collected from a water conveyance tunnel constructed by the TBM tunneling method in China. The field data including the actual cutter wear and the geological parameters along the studied tunnel were compiled in a special database that was subjected to statistical analysis to reveal the genuine wear rule of a 20-in. disc cutter and develop the reasonable correlations between some common intact rock parameters and the disc cutter life. These equations were developed based on data from massive to very massive granite with a UCS range of 40-100 MPa, which can be applied for the assessment of the cutter life of a 20-in. disc cutter in similar hard rock projects with similar rock strengths and rock abrasivities.

  13. U.S. Coast Guard Cutter Procurement Lessons Impacts on the Offshore Patrol Cutter Program Affordability

    Science.gov (United States)

    2015-12-01

    Budget Control Act BLS Bureau of Labor and Statistics C4ISR Command, Control, Communications, Computers, Intelligence, Surveillance, and...made prior to full-rate production. If the program is delinquent in the testing of all of the functionality and the ability to meet stated KPPs, the...estimated the price per pound of the ship by incorporating the Bureau of Labor Statistics calculations on shipbuilding labor costs, average material cost

  14. Thrust and torque characteristics based on a new cutter-head load model

    Science.gov (United States)

    Liu, Jianqin; Ren, Jiabao; Guo, Wei

    2015-07-01

    Full face rock tunnel boring machine(TBM) has been widely used in hard rock tunnels, however, there are few published theory about cutter-head design, and the design criteria of cutter-head under complex geological is not clear yet. To deal with the complex relationship among geological parameters, cutter parameters, and operating parameters during tunneling processes, a cutter-head load model is established by using CSM(Colorado school of mines) prediction model. Force distribution on cutter-head under a certain geology is calculated with the new established load model, and result shows that inner cutters bear more force than outer cutters, combining with disc cutters abrasion; a general principle of disc cutters' layout design is proposed. Within the model, the relationship among rock uniaxial compressive strength(UCS), penetration and thrust on cutter-head are analyzed, and the results shows that with increasing penetration, cutter thrust increases, but the growth rate slows and higher penetration makes lower special energy(SE). Finally, a fitting mathematical model of ZT(ratio of cutter-head torque and thrust) and penetration is established, and verified by TB880E, which can be used to direct how to set thrust and torque on cutter-head. When penetration is small, the cutter-head thrust is the main limiting factor in tunneling; when the penetration is large, cutter-head torque is the major limiting factor in tunneling. Based on the new cutter-head load model, thrust and torque characteristics of TBM further are researched and a new way for cutter-head layout design and TBM tunneling operations is proposed.

  15. An ergonomic approach for designing indian traditional vegetable cutter.

    Science.gov (United States)

    Dhara, Prakash C; De, Sujaya; Sengupta, Piyali; Maity, Payel; Pal, Amitava

    2015-01-01

    In India varieties of hand tools have been used to cut the vegetables. Traditional vegetable cutter is a commonly used hand tool which has been used for years in the kitchen. The tool may have some design related problems. The present study was undertaken to reduce those problems. The study objective was to evaluate a new design of traditional vegetable cutters for use in the Indian kitchen. One hundred and fifty Indian women who regularly used a vegetable cutter for cooking purposes participated in this study. The design of the vegetable cutter was modified based on the postural preference of the users and other anthropometric factors including the blade angle, length, breadth and width of the sitting area. The prevalence of musculoskeletal disorders was assessed by means of a questionnaire for subjects' feedback. New concepts of the design were proposed and a few prototypes were made and were tested by paired comparison using the EMG system. A large number of subjects (61%) used the vegetable cutter while sitting on the floor with folded knees and the prevalence of MSD in most of the body parts was comparatively lower in this posture than that in squatting posture. In the new design, a broad platform was suggested to provide a more comfortable sitting when a subject sits on it with folded knees. For the vegetable cutter, the blade angle was made at 120° with a broad folded wooden base as the final prototype of the cutter. The length, breadth, and thickness of the base were selected based on the results of the anthropometric measurements among the prototypes of the cutters. The selected vegetable cutter showed the least myoelectric activity among the prototypes during cutting vegetables. The modified vegetable cutter appeared to be ergonomically effective, less prone to muscular stress, and compatible for preferred posture of the users.

  16. Research methods to develop Measures of Effectiveness of the United States Coast Guard`s Vessel Inspection and Boarding Program. Volume 2, Main report

    Energy Technology Data Exchange (ETDEWEB)

    Wheeler, T.; Cox, R. [Sandia National Labs., Albuquerque, NM (United States); Gawande, K. [New Mexico Univ., Albuquerque, NM (United States). Dept. of Economics; Stone, R.; Waisel, L.; Wallace, W.A. [Rensselaer Polytechnic Inst., Troy, New York (United States). Dept. of Decision Sciences and Engineering Systems

    1995-04-01

    The primary objective of this study is to provide Measures of Effectiveness (MOEs) of the US Coast Guard Marine Inspection and Boarding Program based on objective scientific methods. A secondary objective of the study is to provide USCG management with a methodologically and theoretically sound aid to effective policy decision-making. The MOEs constructed in this study are specific to the Marine Inspection and Boarding Program, but the methodology of the study is based on sound theoretical principles that are probably applicable to a range of USCG activities. Hence the methodology applied equally to other important USCG programs and can be similarly used to measure their effectiveness and as an aid to decision-making.

  17. Shaping Cutter Original Profile for Fine-module Ratchet Teeth Cutting

    Science.gov (United States)

    Sharkov, O. V.; Koryagin, S. I.; Velikanov, N. L.

    2018-03-01

    The methods for determining geometric characteristics of a theoretical original profile of the cutter for cutting ratchet teeth with a module of 0.3–1.0 mm are considered in the article. Design models describing the shaping process of cutting edges of cutter teeth are developed. Systems of expressions for determining coordinates of the points of front and back edges of cutter teeth; the workpiece angles of rotation during the cutting process; the minimum cutter radius are received. The basic data when using the proposed technique are: radii of circumferences passing through cavities of cutter teeth and external cut teeth; the gradient angle and length of straight section of the front edge of a cut tooth; angles of rotation of the cutter and the workpiece at the moment of shaping.

  18. Analysis on the Rock-Cutter Interaction Mechanism During the TBM Tunneling Process

    Science.gov (United States)

    Yang, Haiqing; Wang, He; Zhou, Xiaoping

    2016-03-01

    The accurate prediction of rock cutting forces of disc cutters is crucial for tunnel boring machine (TBM) design and construction. Disc cutter wear, which affects TBM penetration performance, has frequently been found at TBM sites. By considering the operating path and wear of the disc cutter, a new model is proposed for evaluating the cutting force and wear of the disc cutter in the tunneling process. The circular path adopted herein, which is the actual running path of the TBM disc cutter, shows that the lateral force of the disc cutter is asymmetric. The lateral forces on the sides of the disc cutter are clearly different. However, traditional solutions are obtained by assuming a linear path, where the later forces are viewed as equal. To simulate the interaction between the rock and disc cutter, a simple brittle damage model for rock mass is introduced here. Based on the explicit dynamic finite element method, the cutting force acting on the rock generated by a single disc cutter is simulated. It is shown that the lateral cutting force of the disc cutter strongly affects the wear extent of disc cutter. The wear mechanism is thus underestimated by the classical model, which was obtained by linear cutting tests. The simulation results are discussed and compared with other models, and these simulation results agree well with the results of present ones.

  19. Space cutter compensation method for five-axis nonuniform rational basis spline machining

    Directory of Open Access Journals (Sweden)

    Yanyu Ding

    2015-07-01

    Full Text Available In view of the good machining performance of traditional three-axis nonuniform rational basis spline interpolation and the space cutter compensation issue in multi-axis machining, this article presents a triple nonuniform rational basis spline five-axis interpolation method, which uses three nonuniform rational basis spline curves to describe cutter center location, cutter axis vector, and cutter contact point trajectory, respectively. The relative position of the cutter and workpiece is calculated under the workpiece coordinate system, and the cutter machining trajectory can be described precisely and smoothly using this method. The three nonuniform rational basis spline curves are transformed into a 12-dimentional Bézier curve to carry out discretization during the discrete process. With the cutter contact point trajectory as the precision control condition, the discretization is fast. As for different cutters and corners, the complete description method of space cutter compensation vector is presented in this article. Finally, the five-axis nonuniform rational basis spline machining method is further verified in a two-turntable five-axis machine.

  20. Contingency planning at the flotilla level in the United States Coast Guard Auxiliary: flotilla 81-a case study.

    Science.gov (United States)

    Schooley, Shawn Erik

    2013-01-01

    This article presents a case study of United States Coast Guard Auxiliary Flotilla 81. Flotilla 81 created its first formal, single agency contingency plan. The research question addressed is "How can a flotilla successfully develop a contingency plan?" Five emergent themes are identified. They are offered as suggested promising practices for other flotillas in need of creating a contingency plan. Findings suggest successful contingency planning is a result of effective collaboration with community partners. Network management theory is a key to an effective contingency planning process.

  1. U.S. Coast Guard Cutter Procurement Lessons Impacts on the Offshore Patrol Cutter (OPC) Program Affordability

    Science.gov (United States)

    2015-12-01

    Block Buy Contracting Budget Control Act Bureau of Labor and Statistics Command, Control, Communications, Computers, Intelligence, Surveillance, and...made prior to full-rate production. If the program is delinquent in the testing of all of the functionality and the ability to meet stated KPPs, the...incorporating the Bureau of Labor Statistics calculations on shipbuilding labor costs, average material cost per ship, and “wrap rate” for overhead

  2. Development of Diesel Engine Diagnostics for U.S. Coast Guard Cutters.

    Science.gov (United States)

    1981-07-01

    even though this type of transducer is sensitive to both acoustic noise and mechanical vibration. These "noise" signals are ordinarily of much higher...Unfortunately, this maintenance work was not scheduled for the immediate future, but the E.O. did agree to make exhaust pyrometer readings for the...pressure pulsations normally present in the engine crankcase. However, the very sensitive pressure transducer apparently registered the acoustical

  3. 7 CFR 29.1164 - Cutters (C Group).

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Cutters (C Group). 29.1164 Section 29.1164 Agriculture... INSPECTION Standards Grades § 29.1164 Cutters (C Group). This group consists of leaves normally grown at or just below the midportion of the stalk. Leaves of the C group have a tendency to roll concealing the...

  4. Tunnel Boring Machine Cutter Maintenance for Constructing Underground Cable Lines from Nuclear Power Plants

    International Nuclear Information System (INIS)

    Lee, Jae Wang; Yee, Eric

    2014-01-01

    The tunnel boring machine (TBM) can construct an underground tunnel efficiently and without construction noise vibration related problems. Many civil projects, such as NPP construction, set importance on the economics of construction. Thus, advance rate, which is the speed at which the TBM is able to progress along its intended route, is one of the key factors affecting construction period and construction expenses. As the saying goes, time is money. Right Double Quotation Mark In addition, it is important to manage construction permits and civil complaints, even when construction expenses and construction periods are excluded. So, accurate prediction for advance rate is important when designing tunnel project. Several designers and project owners have tried to improve construction efficiency and tunneling advance rate.. There have been several studies on managing the rate of wear, designing an optimum tunnel face, and finding the optimum cutter spacing. Cutter replacements due to cutter wear and tear are very important because the wear and tear of cutters attached to the cutter head profoundly affect the advance rate. To manage cutter wear and tear is to control parameters related to cutter shape and cutter wear rate. There have been studies on the relationship between rock properties or TBM characteristics, and cutter wear or replacement. However, many of these studies relied on computer simulations or other small scale experiments. Therefore, this paper attempts to present a correlation between cutter replacement or cutter wear, against various parameters using practical data such as rock quality and TBM shield specifications, from an actual construction site. This study was conducted to suggest directions in the improvement of TBM cutters by analyzing relationships between rock conditions and cutter maintenance as well as TBM advance rates. Actual field data was collected and compared to actual design values in evaluating the effectiveness of traditional

  5. Tunnel Boring Machine Cutter Maintenance for Constructing Underground Cable Lines from Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Wang; Yee, Eric [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2014-10-15

    The tunnel boring machine (TBM) can construct an underground tunnel efficiently and without construction noise vibration related problems. Many civil projects, such as NPP construction, set importance on the economics of construction. Thus, advance rate, which is the speed at which the TBM is able to progress along its intended route, is one of the key factors affecting construction period and construction expenses. As the saying goes, time is money. Right Double Quotation Mark In addition, it is important to manage construction permits and civil complaints, even when construction expenses and construction periods are excluded. So, accurate prediction for advance rate is important when designing tunnel project. Several designers and project owners have tried to improve construction efficiency and tunneling advance rate.. There have been several studies on managing the rate of wear, designing an optimum tunnel face, and finding the optimum cutter spacing. Cutter replacements due to cutter wear and tear are very important because the wear and tear of cutters attached to the cutter head profoundly affect the advance rate. To manage cutter wear and tear is to control parameters related to cutter shape and cutter wear rate. There have been studies on the relationship between rock properties or TBM characteristics, and cutter wear or replacement. However, many of these studies relied on computer simulations or other small scale experiments. Therefore, this paper attempts to present a correlation between cutter replacement or cutter wear, against various parameters using practical data such as rock quality and TBM shield specifications, from an actual construction site. This study was conducted to suggest directions in the improvement of TBM cutters by analyzing relationships between rock conditions and cutter maintenance as well as TBM advance rates. Actual field data was collected and compared to actual design values in evaluating the effectiveness of traditional

  6. Visual Inspection for Breakage of Micro-milling Cutter

    Directory of Open Access Journals (Sweden)

    WANG Lei

    2014-11-01

    Full Text Available In order to realize visual inspection for breakage of micro-milling cutter, a developed image acquisition method of the surface of a micro-milling cutter was constructed and a classification method based on multilayer neural network was proposed in this article. While the milling cutter was rotating at a constant speed, a camera was triggered by a rotary encoder to capture a series of images. And the developed image of milling cutter was created by image mosaic algorithms. The moment of regional feature as well as the gray feature of the tooth edge was extracted as the input vector of neural network. The feature vector includes moment of inertia, geometric central moment, three-dimensional invariants moment and the gray value of the projection on two principal axis directions of the tooth region. By designing a proper neural network, breakage defects can be detected 100 %. And the false discovery rate is 0.5 %.

  7. Pollution prevention, preparedness, and response coordination efforts between the US Coast Guard and Coastal, Great Lakes, and Inland River states

    International Nuclear Information System (INIS)

    Donohoe, M.J.; Russell, B.A.; Clark, P.

    1993-01-01

    Following the passage of the Oil Pollution Act of 1990 (OPA 90) and increased public demands for action in the wake of the Exxon Valdez oil spill, many states are now aggressively redefining and expanding their marine safety and marine environmental protection programs. The US Coast Guard is developing a program to coordinate these efforts with the aim toward minimizing duplicative requirements, leveraging resources, and eliminating barriers to marine transportation due to widely differing federal and state regulations

  8. AVTA Federal Fleet PEV Readiness Data Logging and Characterization Study for United States Coast Guard Headquarters

    Energy Technology Data Exchange (ETDEWEB)

    Schey, Stephen [Idaho National Lab. (INL), Idaho Falls, ID (United States); Francfort, Jim [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    Federal agencies are mandated to purchase alternative fuel vehicles, increase consumption of alternative fuels, and reduce petroleum consumption. Available plug-in electric vehicles (PEVs) provide an attractive option in the selection of alternative fuel vehicles. PEVs, which consist of both battery electric vehicles (BEVs) and plug-in hybrid electric vehicles (PHEVs), have significant advantages over internal combustion engine (ICE) vehicles in terms of energy efficiency, reduced petroleum consumption, and reduced production of greenhouse gas (GHG) emissions, and they provide performance benefits with quieter, smoother operation. This study intended to evaluate the extent to which the United States Coast Guard Headquarters (USCG HQ) could convert part or all of their fleet of vehicles from petroleum-fueled vehicles to PEVs.

  9. An electrical conductivity inspection methodology of polycrystalline diamond cutters

    Science.gov (United States)

    Bogdanov, G.; Wiggins, J.; Bertagnolli, K.; Ludwig, R.

    2012-05-01

    The polycrystalline diamond cutter (PDC) is widely used in oil and gas drilling operations. It is manufactured by sintering diamond powder onto a tungsten carbide substrate at 6 GPa and 1500 C. During sintering, molten cobalt from the substrate infiltrates the diamond table. The residual metal content correlates with cutter performance. We present an instrument that employs electrical impedance tomography capable of imaging the 3D metal content distribution in the diamond table. These images can be used to predict cutter performance as well as detect flaws.

  10. Fragmentation Energy-Saving Theory of Full Face Rock Tunnel Boring Machine Disc Cutters

    Science.gov (United States)

    Zhang, Zhao-Huang; Gong, Guo-Fang; Gao, Qing-Feng; Sun, Fei

    2017-07-01

    Attempts to minimize energy consumption of a tunnel boring machine disc cutter during the process of fragmentation have largely focused on optimizing disc-cutter spacing, as determined by the minimum specific energy required for fragmentation; however, indentation tests showed that rock deforms plastically beneath the cutters. Equations for thrust were developed for both the traditional, popularly employed disc cutter and anew design based on three-dimensional theory. The respective energy consumption for penetration, rolling, and side-slip fragmentations were obtained. A change in disc-cutter fragmentation angles resulted in a change in the nature of the interaction between the cutter and rock, which lowered the specific energy of fragmentation. During actual field excavations to the same penetration length, the combined energy consumption for fragmentation using the newly designed cutters was 15% lower than that when using the traditional design. This paper presents a theory for energy saving in tunnel boring machines. Investigation results showed that the disc cutters designed using this theory were more durable than traditional designs, and effectively lowered the energy consumption.

  11. Test procedure for the Master-Lee and the modified Champion four inch hydraulic cutters

    International Nuclear Information System (INIS)

    Crystal, J.B.

    1995-01-01

    The Master-Lee and the modified Champion 4 Inch hydraulic cutters are being retested to gather and document information related to the following: determine if the Master-Lee cutters will cut the trunnions of an Aluminum fuel canister and a Stainless Steel fuel canister; determine if the Master-Lee cutters will cut 1 1/2 inch diameter fire hose; determine if the modified Champion 4 inch blade will cut sections of piping; and determine the effectiveness of the centering device for the Champion 4 Inch cutters. Determining the limitations of the hydraulic cutter will aid in the process of debris removal in the K-Basin. Based on a previous test, the cutters were returned to the manufacturer for modifications. The modifications to the Champion 4 Inch Cutter and further testing of the Master-Lee Cutter are the subjects of these feature tests

  12. Wear analysis of disc cutters of full face rock tunnel boring machine

    Science.gov (United States)

    Zhang, Zhaohuang; Meng, Liang; Sun, Fei

    2014-11-01

    Wear is a major factor of disc cutters' failure. No current theory offers a standard for the prediction of disc cutter wear yet. In the field the wear prediction method commonly used is based on the excavation length of tunnel boring machine(TBM) to predict the disc cutter wear and its wear law, considering the location number of each disc cutter on the cutterhead(radius for installation); in theory, there is a prediction method of using arc wear coefficient. However, the preceding two methods have their own errors, with their accuracy being 40% or so and largely relying on the technicians' experience. Therefore, radial wear coefficient, axial wear coefficient and trajectory wear coefficient are defined on the basis of the operating characteristics of TBM. With reference to the installation and characteristics of disc cutters, those coefficients are modified according to penetration, which gives rise to the presentation of comprehensive axial wear coefficient, comprehensive radial wear coefficient and comprehensive trajectory wear coefficient. Calculation and determination of wear coefficients are made with consideration of data from a segment of TBM project(excavation length 173 m). The resulting wear coefficient values, after modification, are adopted to predict the disc cutter wear in the follow-up segment of the TBM project(excavation length of 5621 m). The prediction results show that the disc cutter wear predicted with comprehensive radial wear coefficient and comprehensive trajectory wear coefficient are not only accurate(accuracy 16.12%) but also highly congruous, whereas there is a larger deviation in the prediction with comprehensive axial wear coefficient(accuracy 41%, which is in agreement with the prediction of disc cutters' life in the field). This paper puts forth a new method concerning prediction of life span and wear of TBM disc cutters as well as timing for replacing disc cutters.

  13. Effect of cutter type on sediment pollutants release in channel dredging

    Science.gov (United States)

    Yu, Y. R.; Chen, Y.; Dong, M. M.; Yang, B. L.

    2016-08-01

    Dredging activities are often used to maintain existing navigation channels. However’ traditional dredging equipment inevitably leads to sediment resuspension and nutrient loading in water. In this work’ the existing cutter used for dredging was transformed environmentally to reduce the release amount of sediment pollutants’ and to avoid the formation of secondary pollution to water bodies. Simulated tests with a general cutter’ a spiral cutter’ along with a general and spiral cutter equipped with the anti-diffusion device were conducted respectively in this study. The change of pollutants concentration in overlying water was examined. The environmental performance of each different structure cutter was comparatively analysed as well. The result revealed that in channel dredging with a spiral cutter’ the release amount of sediment pollutants was less than with a general cutter’ and that a general/spiral cutter equipped with the anti-diffusion device could effectively reduce the release amount of sediment contaminants’ particularly the release of the nitrogen nutrient during the 1h after the dredging treatment. The best transformation scheme for a cutter suction dredger (CSD) in its environmental-protection function may be: a spiral cutter equipped with the anti-diffusion device.

  14. Arctic Shield 2015 Field Campaign Report

    Energy Technology Data Exchange (ETDEWEB)

    Stafford, Robert A [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ivey, Mark [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-05-01

    During the week of July 13, 2015, the U.S. Coast Guard’s (USCG) Research and Development Center partnered with Conoco Phillips through a Cooperative Research and Development Agreement to conduct a Search and Rescue (SAR) exercise off of Oliktok Point, Alaska. The Coast Guard was interested in exploring how unmanned aircraft systems (UAS) can be used to enhance capabilities for its SAR mission and gain a better understanding of how it could work jointly with private industry for response operations in remote regions. Participants in the exercise included Coast Guard Pacific Area Command, Coast Guard Cutter Healy, Coast Guard District Seventeen, Coast Guard Air Station Kodiak, and Conoco Phillips. Joining Conoco Phillips were their partners Insitu (a Boeing company), Era Helicopter, and Era Helicopter’s partner Priority One. Other government agencies supporting the exercise were the U.S. Department of Energy’s (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility, the National Oceanic and Atmospheric Administration, the Federal Aviation Administration, and the North Slope Borough of the state of Alaska. The exercise scenario involved a simulated small aircraft crash offshore where the survivors took refuge in a 6-man life raft. The aircraft’s last known position and asset availability required the Coast Guard to coordinate the response with Conoco Phillips. This included the use of an Insitu-operated ScanEagle UAS, flown from DOE-ARM’s Sandia National Laboratory-operated facility at Oliktok Point, and manned aircraft provided by both the Coast Guard’s Forward Operating Location in Deadhorse and Era Helicopter. Lessons learned from this exercise will help the Coast Guard understand how to best collaborate with private industry on the North Slope during response operations and develop requirements for UAS performing Coast Guard missions in the Arctic environment. For the ARM facility, the exercise demonstrated some of the opportunities and

  15. The U.S. Coast Guard’s Deepwater Force Modernization Plan: Can It Be Accelerated? Will It Meet Changing Security Needs?

    Science.gov (United States)

    2004-01-01

    Vehicle WAGB Ice Breaker WHEC High Endurance Cutter (also HEC) WIX Training Cutter WLB Seagoing Buoy Tender WLI Inland Buoy Tender WLIC Inland Construction...Foreign vessel inspections • Living marine resources protection • Marine and environmental science. The USCG website includes web pages for each mission...pp. 6–8 (available on the Web at http://www.uscg.mil/deepwater/. Mission Need. Most USCG Deepwater missions can be broken down into the functional

  16. Design theory of full face rock tunnel boring machine transition cutter edge angle and its application

    Science.gov (United States)

    Zhang, Zhaohuang; Meng, Liang; Sun, Fei

    2013-05-01

    At present, the inner cutters of a full face rock tunnel boring machine (TBM) and transition cutter edge angles are designed on the basis of indentation test or linear grooving test. The inner and outer edge angles of disc cutters are characterized as symmetric to each other with respect to the cutter edge plane. This design has some practical defects, such as severe eccentric wear and tipping, etc. In this paper, the current design theory of disc cutter edge angle is analyzed, and the characteristics of the rock-breaking movement of disc cutters are studied. The researching results show that the rotational motion of disc cutters with the cutter head gives rise to the difference between the interactions of inner rock and outer rock with the contact area of disc cutters, with shearing and extrusion on the inner rock and attrition on the outer rock. The wear of disc cutters at the contact area is unbalanced, among which the wear in the largest normal stress area is most apparent. Therefore, a three-dimensional model theory of rock breaking and an edge angle design theory of transition disc cutter are proposed to overcome the flaws of the currently used TBM cutter heads, such as short life span, camber wearing, tipping. And a corresponding equation is established. With reference to a specific construction case, the edge angle of the transition disc cutter has been designed based on the theory. The application of TBM in some practical project proves that the theory has obvious advantages in enhancing disc cutter life, decreasing replacement frequency, and making economic benefits. The proposed research provides a theoretical basis for the design of TBM three-dimensional disc cutters whose rock-breaking operation time can be effectively increased.

  17. Superhard nanophase cutter materials for rock drilling applications; FINAL

    International Nuclear Information System (INIS)

    Voronov, O.; Tompa, G.; Sadangi, R.; Kear, B.; Wilson, C.; Yan, P.

    2000-01-01

    The Low Pressure-High Temperature (LPHT) System has been developed for sintering of nanophase cutter and anvil materials. Microstructured and nanostructured cutters were sintered and studied for rock drilling applications. The WC/Co anvils were sintered and used for development of High Pressure-High Temperature (HPHT) Systems. Binderless diamond and superhard nanophase cutter materials were manufactured with help of HPHT Systems. The diamond materials were studied for rock machining and drilling applications. Binderless Polycrystalline Diamonds (BPCD) have high thermal stability and can be used in geothermal drilling of hard rock formations. Nanophase Polycrystalline Diamonds (NPCD) are under study in precision machining of optical lenses. Triphasic Diamond/Carbide/Metal Composites (TDCC) will be commercialized in drilling and machining applications

  18. MODELING OF RUNNING CUTTERS FOR SHAPING OF IMPROVED NONINVOLUTE TOOTH GEARS

    Directory of Open Access Journals (Sweden)

    Tatyana TRETYAK

    2012-05-01

    Full Text Available The questions of tooling design for production of advanced gears are considered. Engineering is based on the special applied development of the mathematical theory of multiparametric mappings of space. In fulfilled engineering of gear cutting tools for shaping of noninvolute gears it is provided for exclusion of distorted profiling after tool regrinds. There are proposed calculation algorithms, which may be used in dataware of respective CAD/CAM systems of maintenance for tooling backup. Among developed tools there are assembled shaping cutters with prismatic and round cutters. Compensatory possibilities of proposed assembled shaping cutters are ensured by repositioning of shaped cutting edges after their regrindings: by linear displacement of prismatic shaped cutters and angular displacement of round ones respectively.

  19. Software optimization for electrical conductivity imaging in polycrystalline diamond cutters

    Energy Technology Data Exchange (ETDEWEB)

    Bogdanov, G.; Ludwig, R. [Department of Electrical and Computer Engineering, Worcester Polytechnic Institute, 100 Institute Rd, Worcester, MA 01609 (United States); Wiggins, J.; Bertagnolli, K. [US Synthetic, 1260 South 1600 West, Orem, UT 84058 (United States)

    2014-02-18

    We previously reported on an electrical conductivity imaging instrument developed for measurements on polycrystalline diamond cutters. These cylindrical cutters for oil and gas drilling feature a thick polycrystalline diamond layer on a tungsten carbide substrate. The instrument uses electrical impedance tomography to profile the conductivity in the diamond table. Conductivity images must be acquired quickly, on the order of 5 sec per cutter, to be useful in the manufacturing process. This paper reports on successful efforts to optimize the conductivity reconstruction routine, porting major portions of it to NVIDIA GPUs, including a custom CUDA kernel for Jacobian computation.

  20. Climate Change and Arctic Issues in the Marine and Environmental Science Curriculum at the U.S. Coast Guard Academy

    Science.gov (United States)

    Vlietstra, L.; McConnell, M. C.; Bergondo, D. L.; Mrakovcich, K. L.; Futch, V.; Stutzman, B. S.; Fleischmann, C. M.

    2016-02-01

    As global climate change becomes more evident, demand will likely increase for experts with a detailed understanding of the scientific basis of climate change, the ocean's role in the earth-atmosphere system, and forecasted impacts, especially in Arctic regions where effects may be most pronounced. As a result, programs in marine and environmental sciences are uniquely poised to prepare graduates for the formidable challenges posed by changing climates. Here we present research evaluating the prevalence and themes of courses focusing on anthropogenic climate change in 125 Marine Science and Environmental Science undergraduate programs at 86 institutions in the United States. These results, in addition to the increasing role of the Coast Guard in the Arctic, led to the development of two new courses in the curriculum. Climate Change Science, a one-credit seminar, includes several student-centered activities supporting key learning objectives. Polar Oceanography, a three-credit course, incorporates a major outreach component to Coast Guard units and members of the scientific community. Given the importance of climate change in Arctic regions in particular, we also propose six essential "Arctic Literacy Principles" around which courses or individual lesson plans may be organized. We show how these principles are incorporated into an additional new three-credit course, Model Arctic Council, which prepares students to participate in a week-long simulation exercise of Arctic Council meetings, held in Fairbanks, Alaska. Students examine the history and mission of the Arctic Council and explore some of the issues on which the council has deliberated. Special attention is paid to priorities of the current U.S. chairmanship of the Arctic Council which include climate change impacts on, and stewardship of, the Arctic Ocean.

  1. Pivot to the Homeland - An Escalated Maritime Interdictions Approach Towards Combating Transnational Criminal Networks in the Western Hemisphere

    Science.gov (United States)

    2015-06-03

    Meanwhile, Coast Guard High Endurance Cutters (WHECs) built in the 1960s continue to carry out drug interdiction duties battling not only smugglers, but...underwater-challenge-in-caribbean.html?pagewanted=all&_r=0 (accessed December 20, 2014). 12 Inside Cocaine Submarines, USA: National Geographic Channel ...suspect the crew unloaded a cargo of cocaine before fleeing.21 In March 2006, the Calabrian mafia ordered a shipment of nine tons of cocaine ( retail

  2. Process and device for feeding a cutter of nuclear fuel

    International Nuclear Information System (INIS)

    Chaze, Gilbert; Cherel, Guy; Guilloteau, Rene; Tucoulat, Daniel.

    1975-01-01

    A process is described for feeding the cutter of a nuclear fuel tube bundle by means of a mobile magazine. The first operation consists in grabbing the bundle in the storage pool by means of handling gear incorporated in the cutter magazine and introducing the bundle right into the magazine. The second operation is to locate the position of the bundle and to do so a mobile reference plate, of which the relative positions in relation to the magazine and to the cutting section in the cutter are known, is placed near the end of the magazine that will enter into contact with the cutter, the bundle is then moved until its end enters into contact with the reference plate. The next operation consists in adjusting the position of the bundle by moving it out of the magazine by a given length as from the position of the bundle when it was in contact with the reference plate so as to separate the foot end of the bundle by a cut made right next to this foot end. In several successive operations to adjust the cutting positions, the bundle is fed forward in the cutter by a length equal to a tube section. All these operations are carried out without the bundle being separated from the single handling gear built into the magazine [fr

  3. Rock deformation equations and application to the study on slantingly installed disc cutter

    Science.gov (United States)

    Zhang, Zhao-Huang; Meng, Liang; Sun, Fei

    2014-08-01

    At present the mechanical model of the interaction between a disc cutter and rock mainly concerns indentation experiment, linear cutting experiment and tunnel boring machine (TBM) on-site data. This is not in line with the actual rock-breaking movement of the disc cutter and impedes to some extent the research on the rock-breaking mechanism, wear mechanism and design theory. Therefore, our study focuses on the interaction between the slantingly installed disc cutter and rock, developing a model in accordance with the actual rock-breaking movement. Displacement equations are established through an analysis of the velocity vector at the rock-breaking point of the disc cutter blade; the functional relationship between the displacement parameters at the rock-breaking point and its rectangular coordinates is established through an analysis of micro-displacement vectors at the rock-breaking point, thus leading to the geometric equations of rock deformation caused by the slantingly installed disc cutter. Considering the basically linear relationship between the cutting force of disc cutters and the rock deformation before and after the leap break of rock, we express the constitutive relations of rock deformation as generalized Hooke's law and analyze the effect of the slanting installation angle of disc cutters on the rock-breaking force. This will, as we hope, make groundbreaking contributions to the development of the design theory and installation practice of TBM.

  4. Silicon liquid for cooling coal cutter loader motors

    Energy Technology Data Exchange (ETDEWEB)

    Donets, I K; Sukhanov, V V; Tsingarelli, E P; Dmitrenko, Yu I; Kovalev, E B

    1983-05-01

    Several silicones were tested with a view to their suitability for use as a cutter loader engine coolant. None were particularly toxic and FM-5.6AP had the best engineering properties; a full toxicological evaluation was therefore made of it. Threshold concentrations of FM-5.6AP were 450 and 24.1 mg/m/sup 3/ for the acute and chronic tests respectively. Increased temperature (120 C) did not affect the toxicity of the vapors significantly. No influence on the phagocytosis, deposition and elimination of coal dust in the lungs was found. Tests carried out underground in a Donbass mine revealed no harmful effects on miners. Laboratory and mine tests using an EhKVZh-315 cutter loader engine revealed that the quantity of FM-5.6AP vapor present in the air flow is less than the detectable minimum (0.01 mg/ml). It may therefore safely be used as a dielectric liquid in cutter loader engines.

  5. Simulation of rock fragmentation induced by a tunnel boring machine disk cutter

    Directory of Open Access Journals (Sweden)

    Huiyun Li

    2016-05-01

    Full Text Available A constitutive model based on the Johnson–Cook material model and the extended Drucker–Prager strength criterion was implemented in LS-DYNA to simulate the rock failure process induced by a single disk cutter of a tunnel boring machine. The normal, rolling, and side forces were determined by numerical tests. The simulation results showed that the normal and rolling forces increased with increasing penetration while the side force changed little. The normal force also increased under the conditions of confining pressures. The damage region of rock and cutting forces were also obtained by simulation of two disk cutters acting in tandem with different cutting spacings. The optimum ratio of cutter spacing to penetration depth determined from numerical modeling agrees well with that obtained by linear cutting machine tests. The average normal and rolling forces acting on the first cutter are slightly greater than those acting on the second when the cutting disk spacing is relatively small. The numerical modeling was verified to accurately capture the fragmentation of rock induced by disk cutter.

  6. Case studies using the United States Coast Guard's Oil Identification System for petroleum spill source identification

    International Nuclear Information System (INIS)

    Grosser, P.W.; Castellano, F.P.

    1993-01-01

    The Oil Identification System (OIS) was developed in the 1970's at the Coast Guard Research and Development Center, to determine the unique, intrinsic properties which would allow the matching of a spilled oil with its correct source. The Central Oil Identification Laboratory (COIL) was established in 1978 as the operating facility to implement the OIS. The OIS encompasses four analytical methods; thin layer chromatography, fluorescence spectroscopy, infrared spectroscopy and gas chromatography. A sample can be studied according to each individual method or multi-methods approach can be chosen if no single technique gives unequivocal results. Combined these methods are greater than 99% effective. The authors recently utilized the OIS and the COIL for three petroleum spill investigations in New York. As part of the investigation to determine the source(s) of several different petroleum product spills, OIS was conducted along with a review of groundwater sample chromatograms

  7. CLIMATE CHANGE FUEL CELL PROGRAM UNITED STATES COAST GUARD AIR STATION CAPE COD BOURNE, MASSACHUSETTS

    Energy Technology Data Exchange (ETDEWEB)

    John K. Steckel Jr

    2004-06-30

    This report covers the first year of operation of a fuel cell power plant, installed by PPL Spectrum, Inc. (PPL) under contract with the United States Coast Guard (USCG), Research and Development Center (RDC). The fuel cell was installed at Air Station Cape Cod in Bourne, MA. The project had the support of the Massachusetts Technology Collaborative (MTC), the Department of Energy (DOE), and Keyspan Energy. PPL selected FuelCell Energy, Inc. (FCE) and its fuel cell model DFC{reg_sign}300 for the contract. Grant contributions were finalized and a contract between PPL and the USCG for the manufacture, installation, and first year's maintenance of the fuel cell was executed on September 24, 2001. As the prime contractor, PPL was responsible for all facets of the project. All the work was completed by PPL through various subcontracts, including the primary subcontract with FCE for the manufacture, delivery, and installation of the fuel cell. The manufacturing and design phases proceeded in a relatively timely manner for the first half of the project. However, during latter stages of manufacture and fuel cell testing, a variety of issues were encountered that ultimately resulted in several delivery delays, and a number of contract modifications. Final installation and field testing was completed in April and May 2003. Final acceptance of the fuel cell was completed on May 16, 2003. The fuel cell has operated successfully for more than one year. The unit achieved an availability rate of 96%, which exceeded expectations. The capacity factor was limited because the unit was set at 155 kW (versus a nameplate of 250 kW) due to the interconnection with the electric utility. There were 18 shutdowns during the first year and most were brief. The ability of this plant to operate in the island mode improved availability by 3 to 4%. Events that would normally be shutdowns were simply island mode events. The mean time between failure was calculated at 239 hours, or slightly

  8. NEW HIGH STRENGTH AND FASTER DRILLING TSP DIAMOND CUTTERS

    Energy Technology Data Exchange (ETDEWEB)

    Robert Radtke

    2006-01-31

    The manufacture of thermally stable diamond (TSP) cutters for drill bits used in petroleum drilling requires the brazing of two dissimilar materials--TSP diamond and tungsten carbide. The ENDURUS{trademark} thermally stable diamond cutter developed by Technology International, Inc. exhibits (1) high attachment (shear) strength, exceeding 345 MPa (50,000 psi), (2) TSP diamond impact strength increased by 36%, (3) prevents TSP fracture when drilling hard rock, and (4) maintains a sharp edge when drilling hard and abrasive rock. A novel microwave brazing (MWB) method for joining dissimilar materials has been developed. A conventional braze filler metal is combined with microwave heating which minimizes thermal residual stress between materials with dissimilar coefficients of thermal expansion. The process results in preferential heating of the lower thermal expansion diamond material, thus providing the ability to match the thermal expansion of the dissimilar material pair. Methods for brazing with both conventional and exothermic braze filler metals have been developed. Finite element modeling (FEM) assisted in the fabrication of TSP cutters controllable thermal residual stress and high shear attachment strength. Further, a unique cutter design for absorbing shock, the densification of otherwise porous TSP diamond for increased mechanical strength, and diamond ion implantation for increased diamond fracture resistance resulted in successful drill bit tests.

  9. Health status of Haitian migrants--U.S. Naval Base, Guantanamo Bay, Cuba, November 1991-April 1992.

    Science.gov (United States)

    1993-02-26

    In November 1991, following a military coup in Haiti, thousands of Haitians fled that country in small open boats. Most migrants were intercepted by U.S. Coast Guard cutters and taken to the U.S. Naval Base at Guantanamo Bay (GTMO), Cuba (Figure 1), where the U.S. Department of Defense (DOD) established a joint task force (JTF) migrant relief operation.* This report summarizes the results of health assessments of migrants conducted by the JTF.

  10. National Security Cutter: Enhanced Oversight Needed to Ensure Problems Discovered during Testing and Operations Are Addressed

    Science.gov (United States)

    2016-01-01

    May Lead to NSCs and Future DHS Assets Deploying without Having Demonstrated Full Capabilities 22 Performance Issues Discovered Outside of IOT &E...Examples of National Security Cutter Critical Operational Issues and Key Performance Parameters 10 Table 3: National Security Cutter Major...Cutter IOT &E Initial Operational Test and Evaluation KPP Key Performance Parameter LRI-II Long-Range Interceptor II NSC National Security Cutter

  11. Disc cutter wear and rock texture in hard rock TBM tunneling

    International Nuclear Information System (INIS)

    Koizumi, Yu; Tsusaka, Kimikazu; Tanimoto, Chikaosa; Nakagawa, Shigeo; Fujita, Naoya

    2008-01-01

    Disc cutter wear in TBM tunneling is caused by initial fragmentation of a solid rock face (the primary fragmentation) and fragmentation of residual rock pieces between a cutterhead and the face (the secondary fragmentation). In two projects through sedimentary and granitic rocks, the authors investigated the relationships between the rate of cutter wear caused by the primary fragmentation, point load index and the grain size and contents of abrasive minerals. As a result, it was found that the tensile strength and the mineral contents of rocks significantly influenced the cutter wear in both projects and thus it is necessary to take into account of rock type. (author)

  12. The three-dimension model for the rock-breaking mechanism of disc cutter and analysis of rock-breaking forces

    Science.gov (United States)

    Zhang, Zhao-Huang; Sun, Fei

    2012-06-01

    To study the rock deformation with three-dimensional model under rolling forces of disc cutter, by carrying out the circular-grooving test with disc cutter rolling around on the rock, the rock mechanical behavior under rolling disc cutter is studied, the mechanical model of disc cutter rolling around the groove is established, and the theory of single-point and double-angle variables is proposed. Based on this theory, the physics equations and geometric equations of rock mechanical behavior under disc cutters of tunnel boring machine (TBM) are studied, and then the balance equations of interactive forces between disc cutter and rock are established. Accordingly, formulas about normal force, rolling force and side force of a disc cutter are derived, and their validity is studied by tests. Therefore, a new method and theory is proposed to study rock-breaking mechanism of disc cutters.

  13. Analysis on the Relationship Between Layout and Consumption of Face Cutters on Hard Rock Tunnel Boring Machines (TBMs)

    Science.gov (United States)

    Geng, Qi; Bruland, Amund; Macias, Francisco Javier

    2018-01-01

    The consumption of TBM disc cutters is influenced by the ground conditions (e.g. intact rock properties, rock mass properties, etc.), the TBM boring parameters (e.g. thrust, RPM, penetration, etc.) and the cutterhead design parameters (e.g. cutterhead shape, cutter layout). Previous researchers have done much work on the influence of the ground conditions and TBM boring parameters on cutter consumption; however, limited research has been found on the relationship between the cutterhead design and cutter consumption. The purpose of the present paper is to study the influence of layout on consumption for the TBM face cutters. Data collected from six tunnels (i.e. the Røssåga Headrace Tunnel in Norway, the Qinling Railway Tunnel in China, tubes 3 and 4 of the Guadarrama Railway Tunnel in Spain, the parallel tubes of the Vigo-Das Maceiras Tunnel in Spain) were used for analysis. The cutter consumption shape curve defined as the fitted function of the normalized cutter consumption versus the cutter position radius is found to be uniquely determined by the cutter layout and was used for analysis. The straightness and smoothness indexes are introduced to evaluate the quality of the shape curves. The analytical results suggest that the spacing of face cutters in the inner and outer parts of cutterhead should to be slightly larger and smaller, respectively, than the average spacing, and the difference of the position angles between the neighbouring cutters should be constant among the cutter positions. The 2-spiral layout pattern is found to be better than other layout patterns in view of cutter consumption and cutterhead force balance.

  14. Sexual Assault and Sexual Harassment in the U.S. Military: Volume 3. Estimates for Coast Guard Service Members from the 2014 RAND Military Workplace Study

    Science.gov (United States)

    2015-01-01

    refer to as rape, including penetration of the mouth, anus, or vagina by a penis , body part, or object. We describe the measure as penetrative sexual...thigh, breast, groin, anus, vagina, penis , and testicles. Table 3.2 Estimated Percentage of Active-Component Coast Guard Service Members Who...reporting. The survey included a link to an image of the form to enhance recall. Fif- teen percent of women who were sexually assaulted in the past year

  15. ACCURACY RESEARCH OF THE DIAMETRICAL SIZES FORMING AT GEAR SHAPING BY STEPPED CUTTER

    Directory of Open Access Journals (Sweden)

    N. M. Rasulov

    2015-09-01

    Full Text Available The paper presents research results of forming accuracy for diametrical sizes at gear shaping with stepped cutter and the traditional method. Analysis of static technological dimensional pitch size chain of wheels being cut is performed. It was revealed that the most of transmission errors of the wheels, formed by the traditional gear-shaped cutter are caused by manufacturing and installation error of the cutter and result from the formation of each tooth of the wheel with a certain tool. This is not the case with gear shaping by step cutter since at that, the profiles of all gear teeth are formed by means of tooth profile mostly remote from the tool rotation axis. Analysis of occurrence of setting-up errors typical for the above gear shaping methods has been performed. At gear shaping with stepped cutter there are no setting-up error components. It was revealed that this fact causes the absence of errors in the tool position before its each double motion. The accuracy of diametrical sizes increases. Formation mechanism of tool installation errors and workpiece are also given and their analysis is presented. Findings in the field of gear shaping with stepped cutter comply with results of research carried out by the other authors in the field of traditional gear shaping.

  16. Performance of diamond and point attack coal cutter picks

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Y. [CSIRO, Brisbane, Qld. (Australia). Division of Exploration and Mining

    1996-12-31

    This paper presents results of laboratory experiments and field trials of PDC (Polycrystalline Diamond Compact) and PA (Point Attack) coal cutter picks. Laboratory cutting tests included linear rock and coal cutting and turning rock cutting. The following parameters were measured to assess performance of PDC and PA cutter picks: cutting force, normal force, specific energy consumption, yield, dust generation and ignitional characteristics (temperature rise). Field trials were conducted on a longwall shearer. Performance of both types of pick interims of pick life and dust generation were assessed. 3 refs., 18 figs., 3 tabs.

  17. Characteristics of Speed Line Cutter and Fringe Analysis of Workpiece Surface

    Directory of Open Access Journals (Sweden)

    Shuai Wang

    2014-02-01

    Full Text Available Easy to operate, speed line cutter has a high machining cost performance, so is very popular among the majority of users. The precision of guide rails, screws and nuts used in most of the machines is not high, and the machine control cannot compensate for the screw pitch error, clearance during the transmission and machining error due to electrode wear. Furthermore, control signal may also be lost in control process. The development of speed line cutter focuses on the quality and machining stability of CNC speed line cutter. This article makes an analysis about the impact of machine’s inherent characteristics on machining workpiece surface, and concludes that analysis shall be made on the irregular fringe, therefore to heighten the machining precision.

  18. Cut-and-Paste of DNA Using an Artificial Restriction DNA Cutter

    Directory of Open Access Journals (Sweden)

    Makoto Komiyama

    2013-02-01

    Full Text Available DNA manipulations using a completely chemistry-based DNA cutter (ARCUT have been reviewed. This cutter, recently developed by the authors, is composed of Ce(IV/EDTA complex and two strands of pseudo-complementary peptide nucleic acid. The site-selective scission proceeds via hydrolysis of targeted phosphodiester linkages, so that the resultant scission fragments can be easily ligated with other fragments by using DNA ligase. Importantly, scission-site and site-specificity of the cutter are freely tuned in terms of the Watson–Crick rule. Thus, when one should like to manipulate DNA according to the need, he or she does not have to think about (1 whether appropriate “restriction enzyme sites” exist near the manipulation site and (2 whether the site-specificity of the restriction enzymes, if any, are sufficient to cut only the aimed position without chopping the DNA at non-targeted sites. Even the human genome can be manipulated, since ARCUT can cut the genome at only one predetermined site. Furthermore, the cutter is useful to promote homologous recombination in human cells, converting a site to desired sequence. The ARCUT-based DNA manipulation should be promising for versatile applications.

  19. Systemic sclerosis in a stone cutter

    Directory of Open Access Journals (Sweden)

    Khanna N

    1997-01-01

    Full Text Available Several occupational hazards especially exposure to silica have been implicated as eliciting factors for the development of scleroderma-like disorders. We here report a case of manual stone-cutter who developed progressive scleroderma, interstitial lung disease and decreased oesophageal motility after several years of exposure to silica dust.

  20. Pill organizers and pill cutters: risks and limitations.

    Science.gov (United States)

    Borja-Oliveira, Caroline Ribeiro de

    2013-02-01

    In this essay, based on documental analysis, the limitations associated with the use of pill organizers and cutters are discussed and analyzed as a matter of public health. The use of the organizers for storing and carrying tablets and capsules exposes these medications to environmental factors from which their original packaging protected them, compromising their stability and safeness. Cutters also pose the additional risk of causing loss of efficacy, adverse reactions and overdose. On the other hand, the user carrying their own medication reflects the balance between autonomy and self-care, and splitting is sometimes required to comply with certain regimens. It can be concluded that healthcare professionals should observe and guide patients and caregivers in order to avoid risks.

  1. Twin-cutter form turning of commutator rings using cutters’ progressive motion piezoelectric engines

    Directory of Open Access Journals (Sweden)

    Vozhzhov Andrey

    2017-01-01

    Full Text Available The option of realization of the technological scheme of twin-cutter form turning via use of piezoelectric engines of progressive motion is hereby proposed. The cutting force vector constitutes the external perturbation effect. The scheme, design, transfer function of the cutter's piezoelectric engine of progressive motion is hereby presented.

  2. 78 FR 23135 - Safety Zone; Blue Water Resort & Casino West Coast Nationals; Parker, AZ

    Science.gov (United States)

    2013-04-18

    ...-AA00 Safety Zone; Blue Water Resort & Casino West Coast Nationals; Parker, AZ AGENCY: Coast Guard, DHS... Water Resort & Casino West Coast Nationals. This temporary safety zone is necessary to provide for the....). RPM Racing Enterprises is sponsoring the Blue Water Resort & Casino West Coast Nationals, which is...

  3. Study on the Effect of Diamond Grain Size on Wear of Polycrystalline Diamond Compact Cutter

    Science.gov (United States)

    Abdul-Rani, A. M.; Che Sidid, Adib Akmal Bin; Adzis, Azri Hamim Ab

    2018-03-01

    Drilling operation is one of the most crucial step in oil and gas industry as it proves the availability of oil and gas under the ground. Polycrystalline Diamond Compact (PDC) bit is a type of bit which is gaining popularity due to its high Rate of Penetration (ROP). However, PDC bit can easily wear off especially when drilling hard rock. The purpose of this study is to identify the relationship between the grain sizes of the diamond and wear rate of the PDC cutter using simulation-based study with FEA software (ABAQUS). The wear rates of a PDC cutter with a different diamond grain sizes were calculated from simulated cuttings of cutters against granite. The result of this study shows that the smaller the diamond grain size, the higher the wear resistivity of PDC cutter.

  4. Prediction of dynamic cutting force and regenerative chatter stability in inserted cutters milling

    Science.gov (United States)

    Li, Zhongqun; Liu, Qiang; Yuan, Songmei; Huang, Kaisheng

    2013-05-01

    Currently, the modeling of cutting process mainly focuses on two aspects: one is the setup of the universal cutting force model that can be adapted to a broader cutting condition; the other is the setup of the exact cutting force model that can accurately reflect a true cutting process. However, there is little research on the prediction of chatter stablity in milling. Based on the generalized mathematical model of inserted cutters introduced by ENGIN, an improved geometrical, mechanical and dynamic model for the vast variety of inserted cutters widely used in engineering applications is presented, in which the average directional cutting force coefficients are obtained by means of a numerical approach, thus leading to an analytical determination of stability lobes diagram (SLD) on the axial depth of cut. A new kind of SLD on the radial depth of cut is also created to satisfy the special requirement of inserted cutter milling. The corresponding algorithms used for predicting cutting forces, vibrations, dimensional surface finish and stability lobes in inserted cutter milling under different cutting conditions are put forward. Thereafter, a dynamic simulation module of inserted cutter milling is implemented by using hybrid program of Matlab with Visual Basic. Verification tests are conducted on a vertical machine center for Aluminum alloy LC4 by using two different types of inserted cutters, and the effectiveness of the model and the algorithm is verified by the good agreement of simulation result with that of cutting tests under different cutting conditions. The proposed model can predict the cutting process accurately under a variety of cutting conditions, and a high efficient and chatter-free milling operation can be achieved by a cutting condition optimization in industry applications.

  5. Magical Thinking in Narratives of Adolescent Cutters

    Science.gov (United States)

    Gregory, Robert J.; Mustata, Georgian T.

    2012-01-01

    Adolescents sometimes cut themselves to relieve distress; however, the mechanism is unknown. Previous studies have linked self-injury to deficits in processing emotions symbolically through language. To investigate expressive language of adolescent cutters, the authors analyzed 100 narratives posted on the Internet. Most narratives (n = 66)…

  6. Life-Cycle Cost Analysis for Small Unmanned Aircraft Systems Deployed Aboard Coast Guard Cutters

    Science.gov (United States)

    2013-12-09

    test, they utilized two ScanEagles (built by Boeing), and a Unicorn (built by Lockheed Martin). Later in 2012, they demonstrated an autonomous...area grows exponentially and the chance of recovering survivors decreases, demonstrating the benefit of increased surveillance assets early. Also

  7. Sea Surface Temperature data collected from buoys deployed world-wide in support of the U.S. Coast Guard Office of Search and Rescue (CG-SAR) program from 2004-03-24 to 2016-09-30 (NCEI Accession (0098145) (NCEI Accession 0098145)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This NCEI accessions contains Sea Surface Temperature (SST) data collected from buoys deployed in support of the U.S. Coast Guard Office of Search and Rescue...

  8. Identification of cutting force coefficients in machining process considering cutter vibration

    Science.gov (United States)

    Yao, Qi; Luo, Ming; Zhang, Dinghua; Wu, Baohai

    2018-03-01

    Among current cutting force models, cutting force coefficients still are the foundation of predicting calculation combined with consideration of geometry engagement variation, equipment characteristics, material properties and so on. Attached with unimpeachable significance, the traditional and some novel identification methods of cutting force coefficient are still faced with trouble, including repeated onerous work, over ideal measuring condition, variation of value due to material divergence, interference from measuring units. To utilize the large amount of data from real manufacturing section, enlarge data sources and enrich cutting data base for former prediction task, a novel identification method is proposed by considering stiffness properties of the cutter-holder-spindle system in this paper. According to previously proposed studies, the direct result of cutter vibration is the form of dynamic undeformed chip thickness. This fluctuation is considered in two stages of this investigation. Firstly, a cutting force model combined with cutter vibration is established in detailed way. Then, on the foundation of modeling, a novel identification method is developed, in which the dynamic undeformed chip thickness could be obtained by using collected data. In a carefully designed experiment procedure, the reliability of model is validated by comparing predicted and measured results. Under different cutting condition and cutter stiffness, data is collected for the justification of identification method. The results showed divergence in calculated coefficients is acceptable confirming the possibility of accomplishing targets by applying this new method. In discussion, the potential directions of improvement are proposed.

  9. Maintaining knife sharpness in industrial meat cutting: A matter of knife or meat cutter ability.

    Science.gov (United States)

    Karltun, J; Vogel, K; Bergstrand, M; Eklund, J

    2016-09-01

    Knife sharpness is imperative in meat cutting. The aim of this study was to compare the impact of knife blade steel quality with meat cutters' individual ability to maintain the cutting edge sharp in an industrial production setting. Twelve meat cutters in two different companies using three different knives during normal production were studied in this quasi-experimental study. Methods included were measuring knife cutting force before and after knife use, time knives were used, ratings of sharpness and discomfort and interviews. Results showed that the meat cutters' skill of maintaining sharpness during work had a much larger effect on knife sharpness during work than the knife steel differences. The ability was also related to feelings of discomfort and to physical exertion. It was found that meat cutters using more knives were more likely to suffer from discomfort in the upper limbs, which is a risk for developing MSD. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Disaster-related exposures and health effects among US Coast Guard responders to Hurricanes Katrina and Rita: a cross-sectional study.

    Science.gov (United States)

    Rusiecki, Jennifer A; Thomas, Dana L; Chen, Ligong; Funk, Renée; McKibben, Jodi; Dayton, Melburn R

    2014-08-01

    Disaster responders work among poorly characterized physical and psychological hazards with little understood regarding health consequences of their work. A survey administered to 2834 US Coast Guard responders to Hurricanes Katrina and Rita provided data on exposures and health effects. Prevalence odds ratios (PORs) evaluated associations between baseline characteristics, missions, exposures, and health effects. Most frequent exposures were animal/insect vector (n = 1309; 46%) and floodwater (n = 817; 29%). Most frequent health effects were sunburn (n = 1119; 39%) and heat stress (n = 810; 30%). Significant positive associations were for mold exposure and sinus infection (POR = 10.39); carbon monoxide and confusion (POR = 6.27); lack of sleep and slips, trips, falls (POR = 3.34) and depression (POR = 3.01); being a Gulf-state responder and depression (POR = 3.22). Increasing protection for disaster responders requires provisions for adequate sleep, personal protective equipment, and access to medical and psychological support.

  11. Development of the spent fuel rod cutting device using the blade cutters

    International Nuclear Information System (INIS)

    Jung, Jae Hoo; Yoon, Ji Sup; Hong, Dong Hee; Kim, Young Hwan; Park, Gee Yong; Kim, Do Woo

    2000-11-01

    A spent fuel rod cutting device is to cut a spent nuclear fuel rod to optimal size for consequent decladding operation. In this paper, various properties of fuel rod, such as a dimension and material of zircaloy tubes and fuel pellets, are investigated. Also, commercially available cutting method and tools is investigated in terms of its performance. As a result, the blade cutter is selected for the design. In order to fabricate the durable blade cutter, various materials are analyzed in terms of material properties, cutter shape, and heat treatment method, etc. Also, the durability of this tool is tested by cutting the SUS tubes and zircaloy tubes. In the device design, the remote maintainability is considered so that the modularized design is accomplished. Also, the other factors considered in the design are the round shape sustainability at the cut surface, the amount of debris generation, and the fire risk, etc. Considering these design consideration, the spent fuel rod cutting device is fabricated and tested

  12. Survey of Domestication Process of Grass Cutter ( Thryonomys ...

    African Journals Online (AJOL)

    Grass cutter (Thryonomys swinderianus) is cherished by many people but, its conservation status is at risk hence, the quest for domestication. An investigation into the domestication process of this rodent in four farms in Oyo and Osun States was carried out. Sixty structured questionnaires were administered to fifteen ...

  13. 40 CFR 1065.365 - Nonmethane cutter penetration fractions.

    Science.gov (United States)

    2010-07-01

    ... fractions. 1065.365 Section 1065.365 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Measurements § 1065.365 Nonmethane cutter penetration fractions. (a) Scope and frequency. If you use a FID... penetration fractions of methane, PFCH4, and ethane, PF C2H6. As detailed in this section, these penetration...

  14. Low-cost silicon wafer dicing using a craft cutter

    KAUST Repository

    Fan, Yiqiang

    2014-05-20

    This paper reports a low-cost silicon wafer dicing technique using a commercial craft cutter. The 4-inch silicon wafers were scribed using a crafter cutter with a mounted diamond blade. The pre-programmed automated process can reach a minimum die feature of 3 mm by 3 mm. We performed this scribing process on the top polished surface of a silicon wafer; we also created a scribing method for the back-unpolished surface in order to protect the structures on the wafer during scribing. Compared with other wafer dicing methods, our proposed dicing technique is extremely low cost (lower than $1,000), and suitable for silicon wafer dicing in microelectromechanical or microfluidic fields, which usually have a relatively large die dimension. The proposed dicing technique is also usable for dicing multiple project wafers, a process where dies of different dimensions are diced on the same wafer.

  15. Evaluation of the Kort Nozzle Design for the United States Coast Guard 140 WYTM Cutter,

    Science.gov (United States)

    1984-01-01

    The thrust coefficient for the screw alone is: KTscrew = T : 0.162, pn2 D4 and the torque coefficient is: KQ = Q = 0.026 pn2 D5 Van Manen and Superiana...Inc.. Thwaites, Bryan (1960), Incompressible Aerodynamics, Oxford at the Clarendon Press, Oxford, England. Van Manen , J. D. and A. Superian (1959...of the screw ( Van Manen 1962). From Appendix A the nozzle chord length = 4.282 ft. and the screw diameter D is 8.50 feet. The values of Vax/Va in

  16. An XML-Based Knowledge Management System of Port Information for U.S. Coast Guard Cutters

    National Research Council Canada - National Science Library

    Stewart, Jeffrey

    2003-01-01

    .... The system uses XML technologies in server/client and stand alone environments. With a web browser, the user views and navigates the system's content from a downloaded file collection or from a centralized data source via a network connection...

  17. Stress-Related Mental Health Symptoms in Coast Guard: Incidence, Vulnerability, and Neurocognitive Performance

    Directory of Open Access Journals (Sweden)

    Richard J. Servatius

    2017-09-01

    Full Text Available U.S. Coast Guard (CG personnel face occupational stressors (e.g., search and rescue which compound daily life stressors encountered by civilians. However, the degree CG personnel express stress-related mental health symptoms of posttraumatic stress disorder (PTSD and major depressive disorder (MDD is understudied as a military branch, and little is known concerning the interplay of vulnerabilities and neurocognitive outcomes in CG personnel. The current study addressed this knowledge gap, recruiting 241 active duty CG personnel (22% female to assess mental health, personality, and neurocognitive function. Participants completed a battery of scales: PTSD Checklist with military and non-military prompts to screen for PTSD, Psychological Health Questionnaire 8 for MDD, and scales for behaviorally inhibited (BI temperament, and distressed (Type D personality. Neurocognitive performance was assessed with the Defense Automated Neurobehavioral Assessment (DANA battery. Cluster scoring yielded an overall rate of PTSD of 15% (95% CI: 11–20% and 8% (95% CI: 3–9% for MDD. Non-military trauma was endorsed twice that of military trauma in those meeting criteria for PTSD. Individual vulnerabilities were predictive of stress-related mental health symptoms in active duty military personnel; specifically, BI temperament predicted PTSD whereas gender and Type D personality predicted MDD. Stress-related mental health symptoms were also associated with poorer reaction time and response inhibition. These results suggest rates of PTSD and MDD are comparable among CG personnel serving Boat Stations to those of larger military services after combat deployment. Further, vulnerabilities distinguished between PTSD and MDD, which have a high degree of co-occurrence in military samples. To what degree stress-related mental healthy symptoms and attendant neurocognitive deficits affect operational effectiveness remains unknown and warrant future study.

  18. Establishment of tunnel-boring machine disk cutter rock-breaking model from energy perspective

    Directory of Open Access Journals (Sweden)

    Liwei Song

    2015-12-01

    Full Text Available As the most important cutting tools during tunnel-boring machine tunneling construction process, V-type disk cutter’s rock-breaking mechanism has been researched by many scholars all over the world. Adopting finite element method, this article focused on the interaction between V-type disk cutters and the intact rock to carry out microscopic parameter analysis methods: first, the stress model of rock breaking was established through V-type disk cutter motion trajectory analysis; second, based on the incremental theorem of the elastic–plastic theory, the strain model of the relative changes of rock displacement during breaking process was created. According to the principle of admissible work by energy method of the elastic–plastic theory to analyze energy transfer rules in the process of breaking rock, rock-breaking force of the V-type disk cutter could be regarded as the external force in the rock system. Finally, by taking the rock system as the reference object, the total potential energy equivalent model of rock system was derived to obtain the forces of the three directions acting on V-type disk cutter during the rock-breaking process. This derived model, which has been proved to be effective and scientific through comparisons with some original force models and by comparative analysis with experimental data, also initiates a new research strategy taking the view of the micro elastic–plastic theory to study the rock-breaking mechanism.

  19. Guard News - The National Guard

    Science.gov (United States)

    operations during chemical attack May 25, 2018 - SWANTON, Ohio - Maintenance is a critical component in Leaders discuss future of National Guard cyber warfare May 21, 2018 - CAMP ATTERBURY, Ind. - While National Guard teams from across the nation tested themselves on their cyber defensive capabilities at

  20. Performance of Rotary Cutter Type Breaking Machine for Breakingand Deshelling Cocoa Roasted Beans

    Directory of Open Access Journals (Sweden)

    Sukrisno Widyotomo

    2005-12-01

    Full Text Available Conversion of cocoa beans to chocolate product is, therefore, one of the promising alternatives to increase the value added of dried cocoa beans. On the other hand, the development of chocolate industry requires an appropriate technology that is not available yet for small or medium scale of business. Breaking and deshelling cocoa roasted beans is one important steps in cocoa processing to ascertain good chocolate quality. The aim of this research is to study performance of rotary cutter type breaking machine for breaking and deshelling cocoa roasted beans. Indonesian Coffee and Cocoa Research Institute has designed and tested a rotary cutter type breaking machine for breaking and deshelling cocoa roasted beans. Breaker unit has rotated by ½ HP power, single phase, 110/220 V and 1440 rpm. Transmission system that use for rotating breaker unit is pulley and single V belt. Centrifugal blower as separator unit between cotyledon and shell has specification 0.5 m 3 /min air flow, 780 Pa, 370 W, and 220 V. Field tests showed that the optimum capacity of the machine was 268 kg/h with 500 rpm speed of rotary cutter, 2,8 m/s separator air flow, and power require was 833 W. Percentage product in outlet 1 and 2 were 94.5% and 5.5%. Particle distribution from outlet 1 was 92% as cotyledon, 8% as shell in cotyledon and on outlet 2 was 97% as shell, 3% as cotyledon in shell. Key words:cocoa, breaking, rotary cutter, quality.

  1. National Guard > About the Guard > Today in Guard History

    Science.gov (United States)

    National Guard About Us By the Numbers Contact Us FAQ Federal Mission History Join Us Leaders Director of Program Training & Technology Battle Lab (T3BL) Civil Support Simulation Exercises Regional Training March Today in Guard History Leadership CNGB VCNGB SEA DANG DARNG Joint Staff J-1 J-2 J-3 J-4 J-5 J-6 J

  2. Final report on testing of ACONF technology for the US Coast Guard National Distress Systems : a study for the DOE Energy Storage Systems Program.

    Energy Technology Data Exchange (ETDEWEB)

    Storey, Leanne M.; Byrd, Thomas M., Jr.; Murray, Aaron T.; Ginn, Jerry W.; Symons, Philip C. (Electrochemical Engineering Consultants, Inc., Morgan Hill, CA); Corey, Garth P.

    2005-08-01

    This report documents the results of a six month test program of an Alternative Configuration (ACONF) power management system design for a typical United States Coast Guard (USCG) National Distress System (NDS) site. The USCG/USDOE funded work was performed at Sandia National Laboratories to evaluate the effect of a Sandia developed battery management technology known as ACONF on the performance of energy storage systems at NDS sites. This report demonstrates the savings of propane gas, and the improvement of battery performance when utilizing the new ACONF designs. The fuel savings and battery performance improvements resulting from ACONF use would be applicable to all current NDS sites in the field. The inherent savings realized when using the ACONF battery management design was found to be significant when compared to battery replacement and propane refueling at the remote NDS sites.

  3. High Performance Residential Housing Units at U.S. Coast Guard Base Kodiak: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Romero, R.; Hickey, J.

    2013-10-01

    The United States Coast Guard (USCG) constructs residential housing throughout the country using a basic template that must meet the minimum Leadership in Energy and Environmental Design (LEED) Silver criteria or better for the units. In Kodiak, Alaska, USCG is procuring between 24 and 100 residential multi-family housing units. Priorities for the Kodiak project were to reduce overall energyconsumption by at least 20% over existing units, improve envelope construction, and evaluate space heating options. USCG is challenged with maintaining similar existing units that have complicated residential diesel boilers. Additionally, fuel and material costs are high in Kodiak. While USCG has worked to optimize the performance of the housing units with principles of improved buildingenvelope, the engineers realize there are still opportunities for improvement, especially within the heating, ventilation, and air conditioning (HVAC) system and different envelope measures. USCG staff also desires to balance higher upfront project costs for significantly reduced life-cycle costs of the residential units that have an expected lifetime of 50 or more years. To answer thesequestions, this analysis used the residential modeling tool BEoptE+ to examine potential energy- saving opportunities for the climate. The results suggest criteria for achieving optimized housing performance at the lowest cost. USCG will integrate the criteria into their procurement process. To achieve greater than 50% energy savings, USCG will need to specify full 2x 6 wood stud R-21 insulationwith two 2 inches of exterior foam, R-38 ceiling insulation or even wall insulation in the crawl space, and R-49 fiberglass batts in a the vented attic. The air barrier should be improved to ensure a tight envelope with minimal infiltration to the goal of 2.0 ACH50. With the implementation of an air source heat pump for space heating requirements, the combination of HVAC and envelope savings inthe residential unit can save

  4. Mathematical modeling on obligate mutualism: Interactions between leaf-cutter ants and their fungus garden.

    Science.gov (United States)

    Kang, Yun; Clark, Rebecca; Makiyama, Michael; Fewell, Jennifer

    2011-11-21

    We propose a simple mathematical model by applying Michaelis-Menton equations of enzyme kinetics to study the mutualistic interaction between the leaf cutter ant and its fungus garden at the early stage of colony expansion. We derive sufficient conditions on the extinction and coexistence of these two species. In addition, we give a region of initial condition that leads to the extinction of two species when the model has an interior attractor. Our global analysis indicates that the division of labor by worker ants and initial conditions are two important factors that determine whether leaf cutter ants' colonies and their fungus garden can survive and grow or not. We validate the model by comparing model simulations and data on fungal and ant colony growth rates under laboratory conditions. We perform sensitive analysis of the model based on the experimental data to gain more biological insights on ecological interactions between leaf-cutter ants and their fungus garden. Finally, we give conclusions and discuss potential future work. Published by Elsevier Ltd.

  5. Voluntary Genital Ablations: Contrasting the Cutters and Their Clients

    Directory of Open Access Journals (Sweden)

    Robyn A. Jackowich, BA

    2014-08-01

    Conclusions: This study may help identify individuals who are at risk of performing illegal castrations. That information may help healthcare providers protect individuals with extreme castration ideations from injuring themselves or others. Jackowich RA, Vale R, Vale K, Wassersug RJ, and Johnson TW. Voluntary genital ablations: Contrasting the cutters and their clients. Sex Med 2014;2:121–132.

  6. Open ended tubing cutters

    Science.gov (United States)

    Girala, A. S. (Inventor)

    1981-01-01

    A self clamping cutting tool which includes a handle attached to a C-shaped housing is described. Rotatably mounted within the housing is a C-shaped tool body carrying a set of clamping rolls, two support rolls, and an edged cutting roll (64). The support rolls are disposed to one side of the axis of a pipe and the cutting roll is disposed to the other side of a pipe axis so that these rolls contact a pipe at three circumferential points. Cutter advancing apparatus advance the cutting roll toward the support rollers. The support rolls and cutting roll are rotatable independently of the C-shaped housing. A one way ratchet mechanism disposed between the C-shaped housing and the C-shaped tool body permits operation by movement in one rotational direction about the pipe axis.

  7. Shaping of Rack Cutter Original Profile for Fine-module Ratchet Teeth Cutting

    Science.gov (United States)

    Sharkov, O. V.; Koryagin, S. I.; Velikanov, N. L.

    2018-05-01

    The design models and the process of shaping the cutting edges of the rack cutter for cutting fine-module ratchet teeth are considered in the article. The use of fine-module ratchet teeth can reduce the noise and impact loads during operation of the freewheel mechanisms. Mathematical dependencies for calculating the coordinates determining the geometric position of the points of the front and back edges of the cutting profile of the rack cutter, the workpiece angle of rotation during cutting the ratchet teeth were obtained. When applying the developed method, the initial data are: the radii of the workpiece circumferences passing through the dedendum of the external and internal cut teeth; gradient angles of the front and back edges of the rail.

  8. Remaining Relevant: Historical Contributions, Civil-Military Challenges, and Anti-Submarine Warfare Capabilities on Coast Guard Cutters

    Science.gov (United States)

    2018-03-01

    the other Armed 12 Forces). While some USCG service contributions have been made by select units (such as Port Security Units), I intend to limit... selection and confirmation as Commandant in 2006. In fact, Commandant Allen’s response was so well regarded, he was again appointed by the President to...overseas buyers—keeping millions of American’s employed and fueling layer upon layer of supporting business like trucking, restaurants , gas stations, auto

  9. Aflatoxins produced by Aspergillus nomius ASR3, a pathogen isolated from the leaf-cutter ant Atta sexdens rubropilosa

    Directory of Open Access Journals (Sweden)

    Eduardo Afonso da Silva-Junior

    Full Text Available ABSTRACT Aspergillus spp. cause economic impacts due to aflatoxins production. Although the toxicity of aflatoxins is already known, little information about their ecological roles is available. Here we investigated the compounds produced by Aspergillus nomius ASR3 directly from a dead leaf-cutter queen ant Atta sexdens rubropilosa and the fungal axenic culture. Chemical analyses were carried out by high-resolution mass spectrometry and tandem mass spectrometry techniques. Aflatoxins B1 and G1 were detected in both the axenic culture and in the dead leaf-cutter queen ant. The presence of these mycotoxins in the dead leaf-cutter queen ant suggests that these compounds can be related to the insect pathogenicity of A. nomius against A. sexdens rubropilosa.

  10. Guarded Type Promotion

    DEFF Research Database (Denmark)

    Winther, Johnni

    2011-01-01

    conditional using the instanceof operator and thus the cast type is redundantly mentioned twice. We propose a new typing rule for Java called Guarded Type Promotion aimed at eliminating the need for the explicit casts when guarded. This new typing rule is backward compatible and has been fully implemented...... in a Java 6 compiler. Through our extensive testing of real-life code we show that guarded casts account for approximately one fourth of all casts and that Guarded Type Promotion can eliminate the need for 95 percent of these guarded casts....

  11. A Tooth Flank Crowning Method by Applying a Novel Crossed Angle Function Between the Hob Cutter and Work Gear in the Gear Hobbing Process

    Directory of Open Access Journals (Sweden)

    Wu Yu-Ren

    2016-01-01

    Full Text Available In this paper, a novel longitudinal tooth flank crowning method is proposed by setting the crossed angle between the hob cutter and work gear as a linear function of hob’s traverse feed movement in the gear hobbing process. However, this method makes twisted tooth flanks on the hobbed work gear. Therefore, a variable pressure angle hob cutter is applied to obtain an anti-twist tooth flank of hobbed work gear. A computer simulation example is performed to verify the superiority of the proposed novel hobbing method by comparing topographies of the crowned work gear surfaces hobbed by a standard hob cutter and a variable pressure angle hob cutter.

  12. Diesel fueled ship propulsion fuel cell demonstration project

    Energy Technology Data Exchange (ETDEWEB)

    Kumm, W.H. [Arctic Energies Ltd., Severna Park, MD (United States)

    1996-12-31

    The paper describes the work underway to adapt a former US Navy diesel electric drive ship as a 2.4 Megawatt fuel cell powered, US Coast Guard operated, demonstrator. The Project will design the new configuration, and then remove the four 600 kW diesel electric generators and auxiliaries. It will design, build and install fourteen or more nominal 180 kW diesel fueled molten carbonate internal reforming direct fuel cells (DFCs). The USCG cutter VINDICATOR has been chosen. The adaptation will be carried out at the USCG shipyard at Curtis Bay, MD. A multi-agency (state and federal) cooperative project is now underway. The USCG prime contractor, AEL, is performing the work under a Phase III Small Business Innovation Research (SBIR) award. This follows their successful completion of Phases I and II under contract to the US Naval Sea Systems (NAVSEA) from 1989 through 1993 which successfully demonstrated the feasibility of diesel fueled DFCs. The demonstrated marine propulsion of a USCG cutter will lead to commercial, naval ship and submarine applications as well as on-land applications such as diesel fueled locomotives.

  13. Task force St. Bernard: operational issues and medical management of a National Guard disaster response operation.

    Science.gov (United States)

    Bonnett, Carl J; Schock, Tony R; McVaney, Kevin E; Colwell, Christopher B; Depass, Christopher

    2007-01-01

    After Hurricane Katrina struck the Gulf Coast of the United States on 29 August 2005, it became obvious that the country was facing an enormous national emergency. With local resources overwhelmed, governors across the US responded by deploying thousands of National Guard soldiers and airmen. The National Guard has responded to domestic disasters due to natural hazards since its inception, but an event with the magnitude of Hurricane Katrina was unprecedented. The deployment of >900 Army National Guard soldiers to St. Bernard Parish, Louisiana in the aftermath of the Hurricane was studied to present some of the operational issues involved with providing medical support for this type of operation. In doing so, the authors attempt to address some of the larger issues of how the National Guard can be incorporated into domestic disaster response efforts. A number of unforeseen issues with regards to medical operations, medical supply, communication, preventive medicine, legal issues, and interactions with civilians were encountered and are reviewed. A better understanding of the National Guard and how it can be utilized more effectively in future disaster response operations can be developed.

  14. Sleep deprivation and adverse health effects in United States Coast Guard responders to Hurricanes Katrina and Rita.

    Science.gov (United States)

    Bergan, Timothy; Thomas, Dana; Schwartz, Erica; McKibben, Jodi; Rusiecki, Jennifer

    2015-12-01

    Disaster responders are increasingly called upon to assist in various natural and manmade disasters. A critical safety concern for this population is sleep deprivation; however, there are limited published data regarding sleep deprivation and disaster responder safety. We expanded upon a cross-sectional study of 2695 United States Coast Guard personnel who responded to Hurricanes Katrina and Rita. Data were collected via survey on self-reported timing and location of deployment, missions performed, health effects, medical treatment sought, average nightly sleep, and other lifestyle variables. We created a 4-level sleep deprivation metric based on both average nightly reported sleep (d5hours; >5hours) and length of deployment (d2weeks; >2weeks) to examine the association between sustained sleep deprivation and illnesses, injuries, and symptoms using logistic regression to calculate odds ratios (ORs) and 95% confidence intervals. The strongest, statistically significant positive ORs for the highest sleep deprivation category compared with the least sleep-deprived category were for mental health and neurologic effects, specifically depression (OR=6.76), difficulty concentrating (OR=8.33), and confusion (OR=11.34), and for dehydration (OR=9.0). Injuries most strongly associated with sleep deprivation were twists, sprains, and strains (OR=6.20). Most health outcomes evaluated had monotonically increasing ORs with increasing sleep deprivation, and P tests for trend were statistically significant. Agencies deploying disaster responders should understand the risks incurred to their personnel by sustained sleep deprivation. Improved planning of response efforts to disasters can reduce the potential for sleep deprivation and lead to decreased morbidity in disaster responders. Published by Elsevier Inc.

  15. RCRA corrective measures using a permeable reactive iron wall US Coast Guard Support Center, Elizabeth City, North Carolina

    International Nuclear Information System (INIS)

    Schmithors, W.L.; Vardy, J.A.

    1997-01-01

    A chromic acid release was discovered at a former electroplating shop at the U.S. Coast Guard Support Center in Elizabeth City, North Carolina. Initial investigative activities indicated that chromic acid had migrated into the subsurface soils and groundwater. In addition, trichloroethylene (TCE) was also discovered in groundwater during subsequent investigations of the hexavalent chromium (Cr VI) plume. Corrective measures were required under the Resource Conservation and Recovery Act (RCRA). The in-situ remediation method, proposed under RCRA Interim Measures to passively treat the groundwater contaminants, uses reactive zero-valent iron to reductively dechlorinate the chlorinated compounds and to mineralize the hexavalent chromium. A 47 meter by 0.6 meter subsurface permeable iron wall was installed downgradient of the source area to a depth of 7 meters using a direct trenching machine. The iron filings were placed in the ground as the soils were excavated from the subsurface. This is the first time that direct trenching was used to install reactive zero-valent iron filings. Over 250 metric tons of iron filings were used as the reactive material in the barrier wall. Installation of the iron filings took one full day. Extensive negotiations with regulatory agencies were required to use this technology under the current facility Hazardous Waste Management Permit. All waste soils generated during the excavation activities were contained and treated on site. Once contaminant concentrations were reduced the waste soils were used as fill material

  16. Load modeling for sharp V-cutter cutting litchi ( Litchi chinensis Sonn ...

    African Journals Online (AJOL)

    harvesting. Cutting load is a key parameter for 'hand-held auto-picker' operation. However, there is still no suitable model for cutting load setting. Hence, a model describing the relationship among cutting load, blade angle and friction coefficient was developed for cutting operation by sharp V-cutters. The model was based ...

  17. 19 CFR 4.1 - Boarding of vessels; cutter and dock passes.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Boarding of vessels; cutter and dock passes. 4.1... OF THE TREASURY VESSELS IN FOREIGN AND DOMESTIC TRADES Arrival and Entry of Vessels § 4.1 Boarding of... regulations. (4) The master of any vessel shall not authorize the boarding or leaving of his vessel by any...

  18. Justification of the Shape of a Non-Circular Cross-Section for Drilling With a Roller Cutter

    Science.gov (United States)

    Buyalich, Gennady; Husnutdinov, Mikhail

    2017-11-01

    The parameters of the shape of non-circular cross-section affect not only the process of blasting, but also the design of the tool and the process of drilling as well. In the conditions of open-pit mining, it is reasonable to use a roller cutter to produce a non-circular cross-section of blasting holes. With regard to the roller cutter, the impact of the cross-section shape on the oscillations of the axial force arising upon its rotation is determined. It is determined that a polygonal shape with rounded comers of the borehole walls connections and their convex shape, which ensures a smaller range of the total axial force and the torque deflecting the bit from the axis of its rotation is the rational form of the non-circular cross-section of the borehole in terms of bit design. It has been shown that the ratio of the number of cutters to the number of borehole corners must be taken into account when justifying the shape of the cross-section, both from the point of view of the effectiveness of the explosion action and from the point of view of the rational design of the bit.

  19. Leucoagaricus gongylophorus produces diverse enzymes for the degradation of recalcitrant plant polymers in leaf-cutter ant fungus gardens.

    Science.gov (United States)

    Aylward, Frank O; Burnum-Johnson, Kristin E; Tringe, Susannah G; Teiling, Clotilde; Tremmel, Daniel M; Moeller, Joseph A; Scott, Jarrod J; Barry, Kerrie W; Piehowski, Paul D; Nicora, Carrie D; Malfatti, Stephanie A; Monroe, Matthew E; Purvine, Samuel O; Goodwin, Lynne A; Smith, Richard D; Weinstock, George M; Gerardo, Nicole M; Suen, Garret; Lipton, Mary S; Currie, Cameron R

    2013-06-01

    Plants represent a large reservoir of organic carbon comprised primarily of recalcitrant polymers that most metazoans are unable to deconstruct. Many herbivores gain access to nutrients in this material indirectly by associating with microbial symbionts, and leaf-cutter ants are a paradigmatic example. These ants use fresh foliar biomass as manure to cultivate gardens composed primarily of Leucoagaricus gongylophorus, a basidiomycetous fungus that produces specialized hyphal swellings that serve as a food source for the host ant colony. Although leaf-cutter ants are conspicuous herbivores that contribute substantially to carbon turnover in Neotropical ecosystems, the process through which plant biomass is degraded in their fungus gardens is not well understood. Here we present the first draft genome of L. gongylophorus, and, using genomic and metaproteomic tools, we investigate its role in lignocellulose degradation in the gardens of both Atta cephalotes and Acromyrmex echinatior leaf-cutter ants. We show that L. gongylophorus produces a diversity of lignocellulases in ant gardens and is likely the primary driver of plant biomass degradation in these ecosystems. We also show that this fungus produces distinct sets of lignocellulases throughout the different stages of biomass degradation, including numerous cellulases and laccases that likely play an important role in lignocellulose degradation. Our study provides a detailed analysis of plant biomass degradation in leaf-cutter ant fungus gardens and insight into the enzymes underlying the symbiosis between these dominant herbivores and their obligate fungal cultivar.

  20. Leucoagaricus gongylophorus Produces Diverse Enzymes for the Degradation of Recalcitrant Plant Polymers in Leaf-Cutter Ant Fungus Gardens

    Energy Technology Data Exchange (ETDEWEB)

    Aylward, Frank O. [Univ. of Wisconsin, Madison, WI (United States); Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burnum-Johnson, Kristin E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tringe, Susannah G. [Dept. of Energy Joint Genome Inst., Walnut Creek, CA (United States); Teiling, Clotilde [Roche Diagnostics, Indianapolis, IN (United States); Tremmel, Daniel [Univ. of Wisconsin, Madison, WI (United States); Moeller, Joseph [Univ. of Wisconsin, Madison, WI (United States); Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Scott, Jarrod J. [Univ. of Wisconsin, Madison, WI (United States); Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Barry, Kerrie W. [Dept. of Energy Joint Genome Inst., Walnut Creek, CA (United States); Piehowski, Paul D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Nicora, Carrie D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Malfatti, Stephanie [Dept. of Energy Joint Genome Inst., Walnut Creek, CA (United States); Monroe, Matthew E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Purvine, Samuel O. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Goodwin, Lynne A. [Dept. of Energy Joint Genome Inst., Walnut Creek, CA (United States); Smith, Richard D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Weinstock, George [Washington Univ. School of Medicine, St. Louis, MS (United States); Gerardo, Nicole [Emory Univ., Atlanta, GA (United States); Suen, Garret [Dept. of Energy Joint Genome Inst., Walnut Creek, CA (United States); Lipton, Mary S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Currie, Cameron R. [Univ. of Wisconsin, Madison, WI (United States); Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smothsonian Tropical Research Inst., Balboa (Panama)

    2013-06-12

    Plants represent a large reservoir of organic carbon comprised largely of recalcitrant polymers that most metazoans are unable to deconstruct. Many herbivores gain access to nutrients in this material indirectly by associating with microbial symbionts, and leaf-cutter ants are a paradigmatic example. These ants use fresh foliar biomass as manure to cultivate fungus gardens composed primarily of Leucoagaricus gongylophorus, a basidiomycetous symbiont that produces specialized hyphal swellings that serve as a food source for the host ant colony. Although leaf-cutter ants are conspicuous herbivores that contribute substantially to carbon turnover in Neotropical ecosystems, the process through which plant biomass is degraded in their fungus gardens is not well understood. Here we present the first draft genome of L. gongylophorus, and using genomic, metaproteomic, and phylogenetic tools we investigate its role in lignocellulose degradation in the fungus gardens of both Atta cephalotes and Acromyrmex echinatior leaf-cutter ants. We show that L. gongylophorus produces a diversity of lignocellulases in fungus gardens, and is likely the primary driver of plant biomass degradation in these ecosystems. We also show that this fungus produces distinct sets of lignocellulases throughout the different stages of biomass degradation, including numerous cellulases and laccases that may be playing an important but previously uncharacterized role in lignocellulose degradation. Our study provides a comprehensive analysis of plant biomass degradation in leaf-cutter ant fungus gardens and provides insight into the molecular dynamics underlying the symbiosis between these dominant herbivores and their obligate fungal cultivar.

  1. Prudent sperm use by leaf-cutter ant queens

    DEFF Research Database (Denmark)

    Den Boer, Susanne Petronella A; Baer, Boris; Dreier, Stéphanie Agnès Jeanine

    2009-01-01

    are able to fertilize close to 100 per cent of the eggs and that the average sperm use per egg is very low, but increases with queen age. The robustness of stored sperm was found to decrease with years of storage, signifying that senescence affects sperm either directly or indirectly via the declining...... glandular secretions or deteriorating sperm-storage organs. We evaluate our findings with a heuristic model, which suggests that the average queen has sperm for almost 9 years of normal colony development. We discuss the extent to which leaf-cutter ant queens have been able to optimize their sperm...

  2. 33 CFR 96.380 - How will the Coast Guard handle compliance and enforcement of these regulations?

    Science.gov (United States)

    2010-07-01

    ... GUARD, DEPARTMENT OF HOMELAND SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS How Will Safety Management Systems Be Certificated and Enforced... safety management system while operating the vessel or transferring cargoes. (b) A foreign vessel that...

  3. Coast Guard

    International Nuclear Information System (INIS)

    1991-08-01

    In the wake of the Exxon Valdez oil spill in Alaska's Prince William Sound, Congress passed the Oil Pollution Act of 1990, thereby activating the Oil Spill Liability Trust Fund. This fund had been set up four years earlier with the proviso that no money could be spent until the enactment of comprehensive oil spill legislation. Passage of the Oil Pollution Act, which significantly expanded the nation's oil spill prevention and response activities, meant that funds became available to federal agencies for the cost of oil spill prevention and response activities. This report provides information on the fund's receipts and disbursements as of March 31, 1991, and the status of activities under way to fully implement the provisions of the Act concerning the fund, including the development of regulations

  4. Microbial community structure of leaf-cutter ant fungus gardens and refuse dumps.

    Science.gov (United States)

    Scott, Jarrod J; Budsberg, Kevin J; Suen, Garret; Wixon, Devin L; Balser, Teri C; Currie, Cameron R

    2010-03-29

    Leaf-cutter ants use fresh plant material to grow a mutualistic fungus that serves as the ants' primary food source. Within fungus gardens, various plant compounds are metabolized and transformed into nutrients suitable for ant consumption. This symbiotic association produces a large amount of refuse consisting primarily of partly degraded plant material. A leaf-cutter ant colony is thus divided into two spatially and chemically distinct environments that together represent a plant biomass degradation gradient. Little is known about the microbial community structure in gardens and dumps or variation between lab and field colonies. Using microbial membrane lipid analysis and a variety of community metrics, we assessed and compared the microbiota of fungus gardens and refuse dumps from both laboratory-maintained and field-collected colonies. We found that gardens contained a diverse and consistent community of microbes, dominated by Gram-negative bacteria, particularly gamma-Proteobacteria and Bacteroidetes. These findings were consistent across lab and field gardens, as well as host ant taxa. In contrast, dumps were enriched for Gram-positive and anaerobic bacteria. Broad-scale clustering analyses revealed that community relatedness between samples reflected system component (gardens/dumps) rather than colony source (lab/field). At finer scales samples clustered according to colony source. Here we report the first comparative analysis of the microbiota from leaf-cutter ant colonies. Our work reveals the presence of two distinct communities: one in the fungus garden and the other in the refuse dump. Though we find some effect of colony source on community structure, our data indicate the presence of consistently associated microbes within gardens and dumps. Substrate composition and system component appear to be the most important factor in structuring the microbial communities. These results thus suggest that resident communities are shaped by the plant degradation

  5. Bird guard

    Science.gov (United States)

    Fairchild, Dana M [Armour, SD

    2010-03-02

    The bird guard provides a device to protect electrical insulators comprising a central shaft; a clamp attached to an end of the shaft to secure the device to a transmission tower; a top and bottom cover to shield transmission tower insulators; and bearings to allow the guard to rotate in order to frighten birds away from the insulators.

  6. Mathematical Modelling of Involute Spur Gears Manufactured by Rack Cutter

    Directory of Open Access Journals (Sweden)

    Tufan Gürkan YILMAZ

    2016-05-01

    Full Text Available In this study, mathematical modelling of asymmetric involute spur gears was situated in by Litvin approach. In this context, firstly, mathematical expressions of rack cutter which manufacture asymmetric involute spur gear, then mathematical expression of asymmetric involute spur gear were obtained by using differential geometry, coordinate transformation and gear theory. Mathematical expressions were modelled in MATLAB and output files including points of involute spur gear’s teeth were designed automatically thanks to macros.

  7. Fractal characteristic study of shearer cutter cutting resistance curves

    Energy Technology Data Exchange (ETDEWEB)

    Liu, C. [Heilongjiang Scientific and Technical Institute, Haerbin (China). Dept of Mechanical Engineering

    2004-02-01

    The cutting resistance curve is the most useful tool for reflecting the overall cutting performance of a cutting machine. The cutting resistance curve is influenced by many factors such as the pick structure and arrangement, the cutter operation parameters, coal quality and geologic conditions. This paper discusses the use of fractal geometry to study the properties of the cutting resistance curve, and the use of fractal dimensions to evaluate cutting performance. On the basis of fractal theory, the general form and calculation method of fractal characteristics are given. 4 refs., 3 figs., 1 tab.

  8. Sensitivity of Coastal Environments and Wildlife to Spilled Oil: Upper Coast of Texas: SOCECON (Socioeconomic Resource Points and Lines)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains human-use resource data for access points, aquaculture sites, airports, artificial reefs, boat ramps, coast guard stations, heliports,...

  9. Irrational Guards are Sometimes Needed

    DEFF Research Database (Denmark)

    Abrahamsen, Mikkel; Adamaszek, Anna; Miltzow, Tillmann

    2017-01-01

    In this paper we study the art gallery problem, which is one of the fundamental problems in computational geometry. The objective is to place a minimum number of guards inside a simple polygon so that the guards together can see the whole polygon. We say that a guard at position x sees a point y...... if the line segment xy is contained in the polygon. Despite an extensive study of the art gallery problem, it remained an open question whether there are polygons given by integer coordinates that require guard positions with irrational coordinates in any optimal solution. We give a positive answer...... to this question by constructing a monotone polygon with integer coordinates that can be guarded by three guards only when we allow to place the guards at points with irrational coordinates. Otherwise, four guards are needed. By extending this example, we show that for every n, there is a polygon which can...

  10. 76 FR 39245 - Privacy Act of 1974: Implementation of Exemptions; Department of Homeland Security/U.S. Coast...

    Science.gov (United States)

    2011-07-06

    ... Marilyn Scott-Perez (202-475-3515), Privacy Officer, U.S. Coast Guard. For privacy issues please contact...;Prices of new books are listed in the first FEDERAL REGISTER issue of each #0;week. #0; #0; #0; #0;#0...

  11. Guarded Cubical Type Theory

    DEFF Research Database (Denmark)

    Birkedal, Lars; Bizjak, Aleš; Clouston, Ranald

    2016-01-01

    This paper improves the treatment of equality in guarded dependent type theory (GDTT), by combining it with cubical type theory (CTT). GDTT is an extensional type theory with guarded recursive types, which are useful for building models of program logics, and for programming and reasoning...... with coinductive types. We wish to implement GDTT with decidable type-checking, while still supporting non-trivial equality proofs that reason about the extensions of guarded recursive constructions. CTT is a variation of Martin-L\\"of type theory in which the identity type is replaced by abstract paths between...... terms. CTT provides a computational interpretation of functional extensionality, is conjectured to have decidable type checking, and has an implemented type-checker. Our new type theory, called guarded cubical type theory, provides a computational interpretation of extensionality for guarded recursive...

  12. 76 FR 76927 - Port Access Route Study: The Atlantic Coast From Maine to Florida

    Science.gov (United States)

    2011-12-09

    ... ). If yes, where should they be located? (6) What are the pros and cons to the Coast Guard designating... the Docket Management Facility on or before January 31, 2012. ADDRESSES: You may submit comments... Portal: http://www.regulations.gov . (2) Fax: (202) 493-2251. (3) Mail: Docket Management Facility (M-30...

  13. Efficacy of 23-gauge vitrectomy cutter replaeing scissors in conventional 20-gauge pars plana vitrectomy for severe PDR

    Directory of Open Access Journals (Sweden)

    Ling Gong

    2014-06-01

    Full Text Available AIM: To determine whether the 23-gauge(23Gvitrecomy cutter could replace scissors in conventional 20-gauge(20Gpars plana vitrectomy for treating severe proliferative diabetic retinopathy(PDR.METHODS:Non-comparative interventional case series. Totally 27 eyes of 27 patients with PDR stageⅥ confirmed by funduscopy and B-ultrasound scan were enrolled. They underwent 20G vitrectomy, in which 23G vitrectomy cutter replaced scissors to remove neuvascular membrane. All 27 eyes received complete panretinal photocoagulation, 17 eyes received no tamponade, 6 eyes were 12% C3F8 tamponade, 4 eyes were filled with silicone oil. The follow up time was 3mo. The operation duration time, iatrogenic retinal tear and retinal bleeding need electric coagulation, best corrected visual acuity(BCVA, retinal reattachment were analyzed.RESULTS: The operative time was 35-120(average 79.19±29.82min; intraoperative iatrogenic retinal breaks were detected in 2 eyes(7%. At the end of 3mo follow up, BCVA>0.1 were in 9 eyes, from 0.05-0.1 in 10 eyes, CONCLUSION: The 23G vitrectomy cutter could replace scissors in conventional 20G pars plana vitrectomy for treating severe PDR.

  14. Trajectory Calculator for Finite-Radius Cutter on a Lathe

    Science.gov (United States)

    Savchenkov, Anatoliy; Strekalov, Dmitry; Yu, Nan

    2009-01-01

    A computer program calculates the two-dimensional trajectory (radial vs. axial position) of a finite-radius-of-curvature cutting tool on a lathe so as to cut a workpiece to a piecewise-continuous, analytically defined surface of revolution. (In the original intended application, the tool is a diamond cutter, and the workpiece is made of a crystalline material and is to be formed into an optical resonator disk.) The program also calculates an optimum cutting speed as F/L, where F is a material-dependent empirical factor and L is the effective instantaneous length of the cutting edge.

  15. Question of the possibility of using diphenyl trichloride for cooling the electric motors of coal cutters loaders

    Energy Technology Data Exchange (ETDEWEB)

    Dmitrenko, Yu I; Donets, I K; Kovalev, Ye B; Sukhanov, V V; Tsingarelli, Ye P

    1981-01-01

    Studies showed that phenyl trichloride with its dielectric and explosive and fire safety properties may be used for cooling explosion protected cutter loader electric motors used in electric machine building.

  16. The deepwater horizon oil spill coast guard cohort study: A cross-sectional study of acute respiratory health symptoms.

    Science.gov (United States)

    Alexander, Melannie; Engel, Lawrence S; Olaiya, Nathan; Wang, Li; Barrett, John; Weems, Laura; Schwartz, Erica G; Rusiecki, Jennifer A

    2018-04-01

    Over 8500 United States Coast Guard (USCG) personnel were deployed in response to the Deepwater Horizon (DWH) oil spill; however, human respiratory effects as a result of spill-related exposures are relatively unknown. USCG personnel who responded to the DWH oil spill were queried via survey on exposures to crude oil and oil dispersant, and acute respiratory symptoms experienced during deployment. Adjusted log binomial regressions were used to calculate prevalence ratios (PRs) and 95% confidence intervals (CI), investigating the associations between oil spill exposures and respiratory symptoms. 4855 USCG personnel completed the survey. More than half (54.6%) and almost one-fourth (22.0%) of responders were exposed to crude oil and oil dispersants, respectively. Coughing was the most prevalent symptom (19.4%), followed by shortness of breath (5.5%), and wheezing (3.6%). Adjusted analyses showed an exposure-response relationship between increasing deployment duration and likelihood of coughing, shortness of breath, and wheezing in the pre-capping period. A similar pattern was observed in the post-capping period for coughing and wheezing. Adjusted analyses revealed increased PRs for coughing (PR=1.92), shortness of breath (PR=2.60), and wheezing (PR=2.68) for any oil exposure. Increasing frequency of inhalation of oil was associated with increased likelihood of all three respiratory symptoms. A similar pattern was observed for contact with oil dispersants for coughing and shortness of breath. The combination of both oil and oil dispersants presented associations that were much greater in magnitude than oil alone for coughing (PR=2.72), shortness of breath (PR=4.65), and wheezing (PR=5.06). Results from the present study suggested strong relationships between oil and oil dispersant exposures and acute respiratory symptoms among disaster responders. Future prospective studies will be needed to confirm these findings. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. The fungal cultivar of leaf-cutter ants produces specific enzymes in response to different plant substrates

    Energy Technology Data Exchange (ETDEWEB)

    Khadempour, Lily [Department of Bacteriology, University of Wisconsin-Madison, Madison WI 53706 USA; Department of Zoology, University of Wisconsin-Madison, Madison WI 53706 USA; Department of Energy Great Lakes Bioenergy Research Center, University of Wisconsin-Madison, Madison WI 53706 USA; Burnum-Johnson, Kristin E. [Biological Sciences Division, Pacific Northwest National Laboratory, Richland WA 99352 USA; Baker, Erin S. [Biological Sciences Division, Pacific Northwest National Laboratory, Richland WA 99352 USA; Nicora, Carrie D. [Biological Sciences Division, Pacific Northwest National Laboratory, Richland WA 99352 USA; Webb-Robertson, Bobbie-Jo M. [Biological Sciences Division, Pacific Northwest National Laboratory, Richland WA 99352 USA; White, Richard A. [Biological Sciences Division, Pacific Northwest National Laboratory, Richland WA 99352 USA; Monroe, Matthew E. [Biological Sciences Division, Pacific Northwest National Laboratory, Richland WA 99352 USA; Huang, Eric L. [Biological Sciences Division, Pacific Northwest National Laboratory, Richland WA 99352 USA; Smith, Richard D. [Biological Sciences Division, Pacific Northwest National Laboratory, Richland WA 99352 USA; Currie, Cameron R. [Department of Bacteriology, University of Wisconsin-Madison, Madison WI 53706 USA; Department of Energy Great Lakes Bioenergy Research Center, University of Wisconsin-Madison, Madison WI 53706 USA

    2016-10-26

    Herbivores use symbiotic microbes to help gain access to energy and nutrients from plant material. Leaf-cutter ants are a paradigmatic example, having tremendous impact on their ecosystems as dominant generalist herbivores through cultivation of a fungus, Leucoagaricus gongylophorous. Here we examine how this mutualism could facilitate the flexible substrate incorporation of the ants by providing leaf-cutter ant subcolonies four substrate types: leaves, flowers, oats, and a mixture of all three. Through metaproteomic analysis of the fungus gardens, we were able to identify and quantify 1766 different fungal proteins, including 161 biomass-degrading enzymes. This analysis revealed that fungal protein profiles were significantly different between subcolonies fed different substrates with the highest abundance of cellulolytic enzymes observed in the leaf and flower treatments. When the fungus garden is provided with leaves and flowers, which contain the majority of their energy in recalcitrant material, it increases its production of proteins that break down cellulose: endoglucanases, exoglucanase and β-glucosidase. Further, the complete metaproteomes for the leaves and flowers treatments were very similar, the mixed treatment closely resembled the treatment with oats alone. This suggests that when provided a mixture of substrates, the fungus garden preferentially produces enzymes necessary for breakdown of simpler, more digestible substrates. This flexible, substrate-specific response of the fungal cultivar allows the leaf-cutter ants to derive energy from a wide range of substrates, which may contribute to their ability to be dominant generalist herbivores.

  18. Guarded Cubical Type Theory

    DEFF Research Database (Denmark)

    Birkedal, Lars; Bizjak, Aleš; Clouston, Ranald

    2016-01-01

    This paper improves the treatment of equality in guarded dependent type theory (GDTT), by combining it with cubical type theory (CTT). GDTT is an extensional type theory with guarded recursive types, which are useful for building models of program logics, and for programming and reasoning...... with coinductive types. We wish to implement GDTT with decidable type checking, while still supporting non-trivial equality proofs that reason about the extensions of guarded recursive constructions. CTT is a variation of Martin-L\\"of type theory in which the identity type is replaced by abstract paths between...... terms. CTT provides a computational interpretation of functional extensionality, enjoys canonicity for the natural numbers type, and is conjectured to support decidable type-checking. Our new type theory, guarded cubical type theory (GCTT), provides a computational interpretation of extensionality...

  19. Demonstration test of the spent fuel rod cutting process with tube cutter mechanism

    International Nuclear Information System (INIS)

    Lee, Jong Youl; Jung, Jae Hoo; Hong, Dong Hee; Yoon, Ji Sup; Lee, Eun Pyo

    2001-03-01

    In this paper, the verification by computer graphics technology for the spent fuel rod cutting devise which belongs to the spent fuel disassembly processes, the performance tests of the real device, and the demonstration tests with tube cutter mechanism are described. The graphical design system is used throughout the design stages from conceptual design to motion analysis like collision detection. By using this system, the device and the process are optimized. The performance test of the real device and the demonstration test using the tube cutter mechanism in the hot cell are carried out. From these results, the spent fuel rod cutting device is improved based on the considerations of circularity of the rod cross-section, debris generation, and fire risk etc. Also, this device is improved to be operated automatically via remote control system considering later use in closed environment like Hot-cell (radioactive area) and the modulization in the structure of this device makes maintenance easy. The result of the performance test and the demonstration in this report is expected to contribute to the optimization of the pre-treatment processes for the reuse of the spent fuel like DUPIC process and the final disposal

  20. Performance prediction of mechanical excavators from linear cutter tests on Yucca Mountain welded tuffs

    International Nuclear Information System (INIS)

    Gertsch, R.; Ozdemir, L.

    1992-09-01

    The performances of mechanical excavators are predicted for excavations in welded tuff. Emphasis is given to tunnel boring machine evaluations based on linear cutting machine test data obtained on samples of Topopah Spring welded tuff. The tests involve measurement of forces as cutters are applied to the rock surface at certain spacing and penetrations. Two disc and two point-attack cutters representing currently available technology are thus evaluated. The performance predictions based on these direct experimental measurements are believed to be more accurate than any previous values for mechanical excavation of welded tuff. The calculations of performance are predicated on minimizing the amount of energy required to excavate the welded tuff. Specific energy decreases with increasing spacing and penetration, and reaches its lowest at the widest spacing and deepest penetration used in this test program. Using the force, spacing, and penetration data from this experimental program, the thrust, torque, power, and rate of penetration are calculated for several types of mechanical excavators. The results of this study show that the candidate excavators will require higher torque and power than heretofore estimated

  1. An Evaluation of Leadership and Management Training in the United States Coast Guard

    Science.gov (United States)

    1982-07-06

    organizational behavior, operations. research, system theory, applied management P-nalysik, and other courses in economics, planning, and financial management ...continued existence in a period of severe financial stress. 3. If there is no positive impact, document this so that top- management in t•he Coast...Relations InstituIte 5. Drug Education Specialist course 6. U. S. Navy Managkment course 7. A Management course og another service 8. Other formal

  2. Consulting and Audit Canada report on the Canadian Coast Guard's stakeholder consultations respecting enhanced governance for Canada's Marine Oil Spill Preparedness and Response Regime

    International Nuclear Information System (INIS)

    1999-09-01

    In 1998 a discussion paper, entitled 'Proposed adjustments to the governance of Canada's marine oil spill preparedness and response regime' was developed and released in a effort to provide a basis for stakeholder discussions on longer term governance issues. Four key elements were discussed in the discussion paper: accountability of responding organizations; enhanced protection of wildlife; the subsidization of the polluter by the Canadian Coast Guard when it takes command of a spill; and maintaining a national system over time. Recipients were asked to respond by April 1999. Public meetings were held in each region to explain key issues and proposals. This report outlines the major themes raised by the different stakeholders in their responses, and provides the broad outlines of the steps that the Department of Fisheries and Oceans intends to take in reply. Detailed summaries of the responses and other relevant documentation are included in five appendices (not attached to this summary report). In general, the proposed governance structures were broadly supported by Canadian industry, with certain adjustments. Concerns were raised over the narrow focus of the existing Regime which does not address the questions of research and development. There was also concern about Canada's ability to manage an effective response to a large spill

  3. 78 FR 11676 - Notice of Inventory Completion: National Guard Bureau/A7AN, Air National Guard, Joint Base...

    Science.gov (United States)

    2013-02-19

    ... Inventory Completion: National Guard Bureau/A7AN, Air National Guard, Joint Base Andrews, MD AGENCY..., Joint Base Andrews, MD, has completed an inventory of human remains and associated funerary objects, in... associated funerary objects may contact National Guard Bureau, Air National Guard, Joint Base Andrews, MD...

  4. Enhanced CHF with Bubble Cutter and Artificial Flow in Nuclear Plants

    International Nuclear Information System (INIS)

    Jung, Chan Hee; Suh, Kune Y.

    2013-01-01

    The main goal of this paper is to body out the notions of forced convection system for enhanced local streams and air bubbles cutting (and/or pushing, breaking) system to explain how CHF can be improved and how those bubble cutter systems are applicable to NPPs. In this paper, the bubble cutter system and an artificial flow system which can cut (and/or push and break) air bubbles is bodied out to drag bubbles. It also make the surface wet condition of heated surfaces and improve heat transfer and prevent on creation of bubbles on the heated surfaces or heat exchangers or reactor cores. Namely, concepts and application methods to increase CHF are presented for NPPs. Enhanced critical heat flux (CHF) is one of our prospective aims for nuclear power plants (NPPs). Previous work has studied the flow boiling CHF enhancement with surfactant solutions under atmospheric pressure because surfactant solutions or surface conditions have an effect on the behavior of occurrence air bubbles on a heated surface. Another possible improvement is to improve efficiency of heat transfer or to body out some types of bubble breaking (and/or pushing, breaking) systems or an artificial flow of fluid that can tear off air bubbles or push hot liquid and bubbles on a surface of heater. During this study, it will be observed that those possible structures can elicit increased CHF by means of maintenance of contact with a coolant such as water

  5. Predicting the granulometric composition of the coal extracted from a drum cutter loader

    Energy Technology Data Exchange (ETDEWEB)

    Sikora, W; Chodura, J; Siwiec, J

    1983-01-01

    An analysis is presented of the effect of the design parameters of the operational element on the output of the large class on the basis of theoretical calculations of the granulometric composition of the coal extracted by the cutter loaders. The effect of the physical and mechanical properties of the coal being extracted is also taken into consideration. The results of the conducted calculations are cited in a graph.

  6. Truck side guard specifications : recommended standard

    Science.gov (United States)

    2016-09-01

    This document is intended to be used by (1) public or private medium/heavy-duty truck fleets considering adding side guards; (2) jurisdictions or customers that require side guards through policy or procurement; (3) manufacturers of side guards; and ...

  7. Studies of chromosomal aberrations in occupationally coal exposed population (coal cutters)

    International Nuclear Information System (INIS)

    Vijender Reddy, V.; Rudrama Devi, K.

    1995-01-01

    A detailed study was carried out among the 235 coal mine workers (coal cutters) and 215 unexposed individuals (controls) on cytogenetic effect of coal in peripheral blood lymphocytes. The frequencies of chromosomal aberrations were studied in exposed coal mine workers as well as in the control groups . The confounding factors like smoking drinking and combination of both were taken into account. There was a significant increase in the total number of aberrations among exposed population subjected to different habits like smoking and alcoholism compared to that of the controls. (author). 14 refs., 1 tab

  8. Influence of Corrosion on the Abrasion of Cutter Steels Used in TBM Tunnelling

    Science.gov (United States)

    Espallargas, N.; Jakobsen, P. D.; Langmaack, L.; Macias, F. J.

    2015-01-01

    Abrasion on tunnel boring machine (TBM) cutters may be critical in terms of project duration and costs. Several researchers are currently studying the degradation of TBM cutter tools used for excavating hard rock, soft ground and loose soil. So far, the primary focus of this research has been directed towards abrasive wear. Abrasive wear is a very common process in TBM excavation, but with a view to the environment in which the tools are working, corrosion may also exert an influence. This paper presents a selection of techniques that can be used to evaluate the influence of corrosion on abrasion on TBM excavation tools. It also presents the influence of corrosion on abrasive wear for some initial tests, with constant steel and geomaterial and varying properties of the excavation fluids (soil conditioners, anti-abrasion additives and water). The results indicate that the chloride content in the water media greatly influences the amount of wear, providing evidence of the influence of corrosion on the abrasion of the cutting tools. The presence of conditioning additives tailored to specific rock or soil conditions reduces wear. However, when chloride is present in the water, the additives minimise wear rates but fail to suppress corrosion of the cutting tools.

  9. Videos - The National Guard

    Science.gov (United States)

    Legislative Liaison Small Business Programs Social Media State Websites Videos Featured Videos On Every Front 2:17 Always Ready, Always There National Guard Bureau Diversity and Inclusion Play Button 1:04 National Guard Bureau Diversity and Inclusion The ChalleNGe Ep.5 [Graduation] Play Button 3:51 The

  10. 30 CFR 75.1722 - Mechanical equipment guards.

    Science.gov (United States)

    2010-07-01

    ... may cause injury to persons shall be guarded. (b) Guards at conveyor-drive, conveyor-head, and conveyor-tail pulleys shall extend a distance sufficient to prevent a person from reaching behind the guard and becoming caught between the belt and the pulley. (c) Except when testing the machinery, guards...

  11. 77 FR 39174 - Safety Zone, Temporary Change for Recurring Fifth Coast Guard District Fireworks Displays...

    Science.gov (United States)

    2012-07-02

    ..., Cavalier Golf & Yacht Club Independence Day Fireworks Display, Broad Bay; Virginia Beach, VA AGENCY: Coast... the Cavalier Golf & Yacht Club Independence Day Fireworks Display. This action is intended to restrict..., 2012, we published a notice of proposed rulemaking (NPRM) entitled Cavalier Golf & Yacht Club...

  12. 30 CFR 77.400 - Mechanical equipment guards.

    Science.gov (United States)

    2010-07-01

    ... shall be guarded. (b) Overhead belts shall be guarded if the whipping action from a broken line would be hazardous to persons below. (c) Guards at conveyor-drive, conveyor-head, and conveyor-tail pulleys shall... between the belt and the pulley. (d) Except when testing the machinery, guards shall be securely in place...

  13. An optimal guarding scheme for thermal conductivity measurement using a guarded cut-bar technique, part 1 experimental study

    International Nuclear Information System (INIS)

    Xing, Changhu

    2014-01-01

    In the guarded cut-bar technique, a guard surrounding the measured sample and reference (meter) bars is temperature controlled to carefully regulate heat losses from the sample and reference bars. Guarding is typically carried out by matching the temperature profiles between the guard and the test stack of sample and meter bars. Problems arise in matching the profiles, especially when the thermal conductivities of the meter bars and of the sample differ, as is usually the case. In a previous numerical study, the applied guarding condition (guard temperature profile) was found to be an important factor in measurement accuracy. Different from the linear-matched or isothermal schemes recommended in literature, the optimal guarding condition is dependent on the system geometry and thermal conductivity ratio of sample to meter bar. To validate the numerical results, an experimental study was performed to investigate the resulting error under different guarding conditions using stainless steel 304 as both the sample and meter bars. The optimal guarding condition was further verified on a certified reference material, pyroceram 9606, and 99.95% pure iron whose thermal conductivities are much smaller and much larger, respectively, than that of the stainless steel meter bars. Additionally, measurements are performed using three different inert gases to show the effect of the insulation effective thermal conductivity on measurement error, revealing low conductivity, argon gas, gives the lowest error sensitivity when deviating from the optimal condition. The result of this study provides a general guideline for the specific measurement method and for methods requiring optimal guarding or insulation

  14. Directory - Social Media - The National Guard

    Science.gov (United States)

    Brigade 1st Battalion, 145th Armored Regiment Headquarters and Headquarters Company, 1st Battalion, 145th Florida Air National Guard Florida Guard History Camp Blanding Joint Training Center Wolfpack Company, 1st Force Georgia National Guard Joint Force Headquarters 116th Air Control Wing Flickr Georgia National

  15. 77 FR 27156 - Safety Zone, Temporary Change for Recurring Fifth Coast Guard District Fireworks Displays...

    Science.gov (United States)

    2012-05-09

    ..., Cavalier Golf & Yacht Club Independence Day Fireworks Display, Broad Bay Virginia Beach, VA AGENCY: Coast... the safety of life on navigable waters during the Cavalier Golf & Yacht Club Independence Day..., 2012 Cavalier Golf & Yacht Club will host a fireworks display on the shoreline of the navigable waters...

  16. Approximation algorithms for guarding holey polygons ...

    African Journals Online (AJOL)

    Guarding edges of polygons is a version of art gallery problem.The goal is finding the minimum number of guards to cover the edges of a polygon. This problem is NP-hard, and to our knowledge there are approximation algorithms just for simple polygons. In this paper we present two approximation algorithms for guarding ...

  17. Performance of Rotary Cutter Type Breaking Machine for Breakingand Deshelling Cocoa Roasted Beans

    OpenAIRE

    Sukrisno Widyotomo; Sri Mulato; Edi Suharyanto

    2005-01-01

    Conversion of cocoa beans to chocolate product is, therefore, one of the promising alternatives to increase the value added of dried cocoa beans. On the other hand, the development of chocolate industry requires an appropriate technology that is not available yet for small or medium scale of business. Breaking and deshelling cocoa roasted beans is one important steps in cocoa processing to ascertain good chocolate quality. The aim of this research is to study performance of rotary cutter type...

  18. Long-term performance monitoring for a permeable reactive barrier at the U.S. Coast Guard Support Center, Elizabeth City, North Carolina.

    Science.gov (United States)

    Puls, R W; Blowes, D W; Gillham, R W

    1999-08-12

    A continuous hanging iron wall was installed in June, 1996, at the U. S. Coast Guard (USCG) Support Center near Elizabeth City, NC, United States, to treat overlapping plumes of chromate and chlorinated solvent compounds. The wall was emplaced using a continuous trenching machine whereby native soil and aquifer sediment was removed and the iron simultaneously emplaced in one continuous excavation and fill operation. To date, there have been seven rounds (November 1996, March 1997, June 1997, September 1997, December 1997, March 1998, and June 1998) of performance monitoring of the wall. At this time, this is the only full-scale continuous 'hanging' wall installed as a permeable reactive barrier to remediate both chlorinated solvent compounds and chromate in groundwater. Performance monitoring entails the following: sampling of 10-5 cm PVC compliance wells and 15 multi-level samplers for the following constituents: TCE, cis-dichloroethylene (c-DCE), vinyl chloride, ethane, ethene, acetylene, methane, major anions, metals, Cr(VI), Fe(II), total sulfides, dissolved H(2), Eh, pH, dissolved oxygen, specific conductance, alkalinity, and turbidity. Electrical conductivity profiles have been conducted using a Geoprobe to verify emplacement of the continuous wall as designed and to locate upgradient and downgradient wall interfaces for coring purposes. Coring has been conducted in November, 1996, in June and September, 1997, and March, 1998, to evaluate the rate of corrosion on the iron surfaces, precipitate buildup (particularly at the upgradient interface), and permeability changes due to wall emplacement. In addition to several continuous vertical cores, angled cores through the 0.6-m thick wall have been collected to capture upgradient and downgradient wall interfaces along approximate horizontal flow paths for mineralogic analyses.

  19. The Cutter incident and the development of a Swedish polio vaccine, 1952-1957

    OpenAIRE

    Axelsson, Per

    2012-01-01

    The creation of two different vaccines to eradicate polio stands out as one of modern science most important accomplishments. The current article examines Swedish polio vaccine research, the vaccination campaign and especially how the Cutter incident came to affect Swedish Science, scientists and society in the 1950s. Sweden is one of the few countries that came to produce its own inactivated polio vaccine (IPV) in the 1950s, a type of vaccine they never abandoned. This article highlights the...

  20. Application of vibro-acoustical studies in process of improving dependability of arm-mounted cutter-heads of KGSA-320 shearers

    Energy Technology Data Exchange (ETDEWEB)

    Zakrzewski, T; Sikora, W

    1986-01-01

    Discusses application of acoustic vibration measurements in maintenance of mining machines. A formula is given for the dimensionless directional discriminant using which the technical state of shearer loader cutting heads can be assessed. KGS-320 shearer cutting drums were investigated at suitable points characterized by maximum deviations from zero reference values. Measurements were carried out in idle-run conditions and are given in graphs: distribution of changes in peak directivity coefficient deviation value for vibration displacement in relation to order number N of cutter head as well as location of measurement point; and distribution of changes in peak directivity coefficient deviation value for vibration velocity in relation to order number N of cutter head and location of the measurement point. An aim is to develop classification criteria for vibration acoustic diagnostics and to use the method for designing and manufacturing machines. 12 refs.

  1. Minimizing guard ring dead space in silicon detectors with an n-type guard ring at the edge of the detector

    International Nuclear Information System (INIS)

    Palviainen, Tanja; Tuuva, Tuure; Leinonen, Kari

    2007-01-01

    Detectors with n-type silicon with an n + -type guard ring were investigated. In the present work, a new p + /n/n + detector structure with an n + guard ring is described. The guard ring is placed at the edge of the detector. The detector depletion region extends also sideways, allowing for signal collection very close to the n-guard ring. In this kind of detector structure, the dead space of the detector is minimized to be only below the guard ring. This is proved by simulations done using Silvaco/ATLAS software

  2. Minimizing guard ring dead space in silicon detectors with an n-type guard ring at the edge of the detector

    Energy Technology Data Exchange (ETDEWEB)

    Palviainen, Tanja [Lappeenranta University of Technology, P.O. Box 20, FIN-53851 Lappeenranta (Finland)]. E-mail: tanja.palviainen@lut.fi; Tuuva, Tuure [Lappeenranta University of Technology, P.O. Box 20, FIN-53851 Lappeenranta (Finland); Leinonen, Kari [Lappeenranta University of Technology, P.O. Box 20, FIN-53851 Lappeenranta (Finland)

    2007-04-01

    Detectors with n-type silicon with an n{sup +}-type guard ring were investigated. In the present work, a new p{sup +}/n/n{sup +} detector structure with an n{sup +} guard ring is described. The guard ring is placed at the edge of the detector. The detector depletion region extends also sideways, allowing for signal collection very close to the n-guard ring. In this kind of detector structure, the dead space of the detector is minimized to be only below the guard ring. This is proved by simulations done using Silvaco/ATLAS software.

  3. Rarefaction Shock Wave Cutter for Offshore Oil-Gas Platform Removal Final Report CRADA No. TC02009.0

    Energy Technology Data Exchange (ETDEWEB)

    Glenn, L. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Barker, J. [Halliburton Energy Services, Alvarado, TX (United States)

    2017-09-06

    This was a collaborative effort between Lawrence Livermore National Security, LLC/Lawrence Livermore National Laboratory (LLNL) (formerly the University of California) and Jet Research Center, a wholly owned division of Halliburton Energy Services, Inc. to design and prototype an improved explosive cutter for cutting the support legs of offshore oil and gas platforms.

  4. FY 1975 Report on results of Sunshine Project. Development of techniques of digging high-temperature beds (Researches on roller cutter bits); 1975 nendo koon chiso kussaku gijutsu no kaihatsu. Roller cutter bit no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1976-03-31

    It is necessary to establish the techniques for digging bedrocks under elevated temperature and pressure for development and utilization of geothermal energy. This project is aimed at development of heat- and wear-resistant bit cutters, which have efficient tooth edge forms and arrangements. Another factor that determines bit serviceability is the bearing built in a cutter, and this project is also aimed at development of long-serviceable bit bearings by improving their resistance to heat. Four types of bits were developed, on a trial basis, and tested (size: 8.625 inches, two types of tooth forms, different shapes and arrangements of insert tips). They were tested for, e.g., their excavation rate, under the conditions of 5 tons as load and 100 rpm. It is found that their excavation rate vary with load, speed of rotation, tooth height and tooth form. Excavation torque increases in almost proportion to load. The sliding bearings of silver and its alloy were tested, to confirm the effects of silver. It is necessary to conduct the field tests in an actual geothermal area of high rock temperature and the ground tests with test machines to dig heated rocks in and after FY 1975, for overall evaluation of the bits developed. (NEDO)

  5. Guarding America: Security Guards and U.S. Critical Infrastructure Protection

    National Research Council Canada - National Science Library

    Parfomak, Paul W

    2004-01-01

    The Bush Administration's 2003 National Strategy for the Physical Protection of Critical Infrastructures and Key Assets indicates that security guards are an important source of protection for critical facilities...

  6. Volunteers in the Danish Home Guard 2016

    DEFF Research Database (Denmark)

    Fridberg, Torben; Larsen, Mona

    This report maps the composition of a group of volunteer members of the Home Guard, as well as their opinions and expectations of the Home Guard and their own voluntary efforts. The report is a follow-up to two previous surveys completed in 2007 and 2011 and it therefore also highlights changes...... from 2007 to 2011 and 2016. Based on a questionnaire survey, the report paints a picture of who the volunteers are, what motivates them and how they perceive their surrounding environment’s view of them as members of the Home Guard. The report also focuses on the volunteers’ view of the Home Guard......’s tasks and activities both in Denmark and abroad. Finally, the report describes the volunteers’ perception of the Home Guards’ communication and campaigns. The report was commissioned and financed by the Danish Home Guard Command....

  7. Fact Sheets - The National Guard

    Science.gov (United States)

    National Guard About Us By the Numbers Contact Us FAQ Federal Mission History Join Us Leaders Director of March Today in Guard History Leadership CNGB VCNGB SEA DANG DARNG Joint Staff J-1 J-2 J-3 J-4 J-5 J-6 J Marshal Office of the Joint Surgeon PARC Small Business Programs Chaplain Diversity NGB-GOMO Resources

  8. Security Guards for the Future Web

    National Research Council Canada - National Science Library

    Reed, Nancy; Bryson, Dave; Garriss, James; Gosnell, Steve; Heaton, Brook; Huber, Gary; Jacobs, David; Pulvermacher, Mary; Semy, Salim; Smith, Chad; Standard, John

    2004-01-01

    .... Guard technology needs to keep pace with the evolving Web environment. The authors conjectured that a family of security guard services would be needed to provide the full range of functionality necessary to support the future Web...

  9. QTL-mapping in mink (Neovison vison) shows evidence for QTL for guard hair thickness, guard hair length and skin length

    DEFF Research Database (Denmark)

    Thirstrup, Janne Pia; Labouriau, Rodrigo; Guldbrandtsen, Bernt

    2011-01-01

    Fur quality in mink (Neovison vison) is a composite trait, consisting of e.g. guard hair length, guard hair thickness and density of wool. A genome wide QTL search was performed to detect QTL for fur quality traits in mink. Here we present the results of QTL analyses for guard hair length, guard...... hair thickness and density of wool. Data from an F2-cross was analysed across fourteen chromosomes using 100 microsatellites as markers with a spacing of approximately 20 cM. The two lines used for the F2-cross were Nordic wild mink and American short nap mink. In total 1,083 animals (21 wild type, 25...... short nap, 103 F1 and 934 F2) were marker typed and recorded for the three presented fur quality traits. For the QTL-analyses a regression analysis implemented in QTL Express software was used. Evidence was found for the existence of QTL for guard hair length, guard hair thickness and density of wool...

  10. Subtidal eelgrass/macroalgae surveys for the proposed breakwaters at the US Coast Guard Station at Ediz Hook, Washington, March 1993

    Energy Technology Data Exchange (ETDEWEB)

    Shreffler, D.K. [Battelle/Marine Sciences Lab., Sequim, WA (US)

    1993-05-01

    In 1993, the US Coast Guard proposed to construct two breakwaters and a debris boom to protect its existing pier and moored vessels inside Ediz Hook in Port Angeles Harbor, Washington. To assist the US Army Corps of Engineers -- Seattle District in determining the potential environmental impacts of the proposed breakwaters, Battelle/Marine Sciences Laboratory performed subtidal SCUBA surveys as specified in the Washington Department of Fisheries intermediate eelgrass/macroalgae habitat survey guidelines. The objectives of the subtidal surveys were to (1) quantify the shoot densities of eelgrass; (2) provide percent cover estimates for non-eelgrass macroalgae species; (3) develop a site map indicating the qualitative distribution of eelgrass/macroalgae species, substrate characterization, approximate depth contours, and the approximate location of the proposed project features; and (4) document the time and date of the surveys, turbidity/visibility, presence of invertebrate/vertebrate species, and anecdotal observations pertinent to habitat characterization of the project site. A total of 14 dives along 12 transects (T1--T12) were successfully completed between March 15 and March 17, 1993. Eelgrass was observed on all of the transects except T7 and T8 at the western debris barrier and T12 along the waterward margin of the existing T-pier. The vicinity of the proposed east breakwater had the highest eelgrass shoot densities (up to 89 shoots/m{sup 2}) observed by the divers. Macroalgae and invertebrate species diversity were also highest at the east breakwater site. The low eelgrass densities observed at the west debris barrier site (0 to 14 shoots/m{sup 2}) can be attributed mostly to the lack of suitable substrate. The existing layer of wood debris armoring the bottom at the west project site currently limits, and in the areas of heaviest deposition probably precludes, the growth of eelgrass. As was expected, no eelgrass was observed at the south breakwater site.

  11. Use of the GPK cutter loader to drive headings. [USSR

    Energy Technology Data Exchange (ETDEWEB)

    Vasil' tsov, A.N.

    1985-01-01

    Mine drivage work is described at the Novovolynskaya mine of the Ukrzapadugol' organization with an output of 520,000 t/y, daily output 1457 t. Two seams 0.6-1.8 m thick are worked at depths of 360-380 m. There is a catagory I methane hazard and a hazard of coal dust explosions. Almost all heading drivage is performed using the GPK cutter loader. The AKP-3/9.2 yielding arch support is used in headings, with an interval of 0.8 m between arches. Local ventilation blowers provide air through 600 mm pipes. Suction dust collectors and spraying are used at the face. Details are given of work organization and maintenance procedures. No serious or fatal accidents were recorded during heading drivage between 1981 and 1984.

  12. Chief, National Guard Bureau - Leadership - The National Guard

    Science.gov (United States)

    the ARNG Deputy Director of the ARNG Chief of Staff of the ARNG Command Chief Warrant Officer of the the ANG Chief of Staff of the ARNG CCW Officer of the ARNG CSM of the ARNG Bottom Links National Guard Civic Leader's Guide ARNG Vision 2020 Posture Statement Strategic Direction CNGB ARNG Financial Report

  13. The influence of the cutting attachment on vibrations emitted by brush cutters and grass trimmers

    Directory of Open Access Journals (Sweden)

    Wójcik Krzysztof

    2015-12-01

    Full Text Available Generally, the choice of cutting attachment used in brush cutters for brushwoods and grasses depends on the type of work, on one hand, and the size of the engine, on the other. However, at the same time, the use of individually chosen cutting elements entails a certain risk of vibration resulting from their varying design and size, which has a big impact on comfort and working time, but most importantly on operator health.

  14. The fungus gardens of leaf-cutter ants undergo a distinct physiological transition during biomass degradation

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Eric L.; Aylward, Frank O.; Kim, Young-Mo; Webb-Robertson, Bobbie-Jo M.; Nicora, Carrie D.; Hu, Zeping; Metz, Thomas O.; Lipton, Mary S.; Smith, Richard D.; Currie, Cameron R.; Burnum-Johnson, Kristin E.

    2014-08-01

    Leaf-cutter ants are dominant herbivores in ecosystems throughout the Neotropics. Rather than directly consuming the fresh foliar biomass they harvest, these ants use it to cultivate specialized fungus gardens. Although recent investigations have shed light on how plant biomass is degraded in fungus gardens, the cycling of nutrients that takes place in these specialized microbial ecosystems is still not well understood. Here, using metametabolomics and metaproteomics techniques, we examine the dynamics of nutrient turnover and biosynthesis in these gardens. Our results reveal that numerous free amino acids and sugars are depleted throughout the process of biomass degradation, indicating that easily accessible nutrients from plant material are readily consumed by microbes in these ecosystems. Accumulation of cellobiose and lignin derivatives near the end of the degradation process is consistent with previous findings of cellulases and laccases produced by Leucoagaricus gongylophorus, the fungus cultivated by leaf-cutter ants. Our results also suggest that ureides may be an important source of nitrogen in fungus gardens, especially during nitrogen-limiting conditions. No free arginine was detected in our metametabolomics experiments despite evidence that the host ants cannot produce this amino acid, suggesting that biosynthesis of this metabolite may be tightly regulated in the fungus garden. These results provide new insights into the dynamics of nutrient cycling that underlie this important ant-fungus symbiosis.

  15. Coast Guard Compensation Alternatives.

    Science.gov (United States)

    1981-12-01

    private automobile to commute. Bachelor personnel were slightly more likely to use their own car or public transpor- tation than were married personnel...Command Washington, D.C. 20370 5. Director for HRM Plans and Policy (OP-150)1 Human Resource Management Division Deputy Chief of Naval Operations

  16. Exploring emergent properties in cellular homeostasis using OnGuard to model K+ and other ion transport in guard cells.

    Science.gov (United States)

    Blatt, Michael R; Wang, Yizhou; Leonhardt, Nathalie; Hills, Adrian

    2014-05-15

    It is widely recognized that the nature and characteristics of transport across eukaryotic membranes are so complex as to defy intuitive understanding. In these circumstances, quantitative mathematical modeling is an essential tool, both to integrate detailed knowledge of individual transporters and to extract the properties emergent from their interactions. As the first, fully integrated and quantitative modeling environment for the study of ion transport dynamics in a plant cell, OnGuard offers a unique tool for exploring homeostatic properties emerging from the interactions of ion transport, both at the plasma membrane and tonoplast in the guard cell. OnGuard has already yielded detail sufficient to guide phenotypic and mutational studies, and it represents a key step toward 'reverse engineering' of stomatal guard cell physiology, based on rational design and testing in simulation, to improve water use efficiency and carbon assimilation. Its construction from the HoTSig libraries enables translation of the software to other cell types, including growing root hairs and pollen. The problems inherent to transport are nonetheless challenging, and are compounded for those unfamiliar with conceptual 'mindset' of the modeler. Here we set out guidelines for the use of OnGuard and outline a standardized approach that will enable users to advance quickly to its application both in the classroom and laboratory. We also highlight the uncanny and emergent property of OnGuard models to reproduce the 'communication' evident between the plasma membrane and tonoplast of the guard cell. Copyright © 2014 The Authors. Published by Elsevier GmbH.. All rights reserved.

  17. A model of PCF in guarded type theory

    DEFF Research Database (Denmark)

    Paviotti, Marco; Møgelberg, Rasmus Ejlers; Birkedal, Lars

    2015-01-01

    Guarded recursion is a form of recursion where recursive calls are guarded by delay modalities. Previous work has shown how guarded recursion is useful for constructing logics for reasoning about programming languages with advanced features, as well as for constructing and reasoning about element...... adequate. The model construction is related to Escardo's metric model for PCF, but here everything is carried out entirely in type theory with guarded recursion, including the formulation of the operational semantics, the model construction and the proof of adequacy...... of coinductive types. In this paper we investigate how type theory with guarded recursion can be used as a metalanguage for denotational semantics useful both for constructing models and for proving properties of these. We do this by constructing a fairly intensional model of PCF and proving it computationally...

  18. A Model of PCF in Guarded Type Theory

    DEFF Research Database (Denmark)

    Paviotti, Marco; Møgelberg, Rasmus Ejlers; Birkedal, Lars

    2015-01-01

    Guarded recursion is a form of recursion where recursive calls are guarded by delay modalities. Previous work has shown how guarded recursion is useful for constructing logics for reasoning about programming languages with advanced features, as well as for constructing and reasoning about element...... adequate. The model construction is related to Escardo's metric model for PCF, but here everything is carried out entirely in type theory with guarded recursion, including the formulation of the operational semantics, the model construction and the proof of adequacy....... of coinductive types. In this paper we investigate how type theory with guarded recursion can be used as a metalanguage for denotational semantics useful both for constructing models and for proving properties of these. We do this by constructing a fairly intensional model of PCF and proving it computationally...

  19. How We Began - About the Guard - The National Guard

    Science.gov (United States)

    Marshal Office of the Joint Surgeon PARC Small Business Programs Chaplain Diversity NGB-GOMO Resources Legislative Liaison Small Business Programs Social Media State Websites Videos Featured Videos On Every Front the organization date of the oldest Army National Guard units is based in law. The Militia Act of May

  20. Field evaluation of cutter and feeder mechanism of chickpea harvester for lentil harvesting

    Directory of Open Access Journals (Sweden)

    S Kamgar

    2016-09-01

    Full Text Available Introduction The main producers of lentil are Canada, India, Nepal and China, respectively and Iran is the ninth producer in the world. The hand pulling is the usual method of lentil harvesting. Use of conventional combine because of short leg varieties, wide combine head in dry land and grain losses by cutter bar vibrations is impossible. So a mechanism should be designed to harvest the lentil plants with minimum damage. This mechanism should be evaluated under different tests of crop and machines such as forward speed (FS, grain moisture content (GMC, different varieties and other parameters. Some researchers studied the effects of GMC (Andrews and et al., 1993; Huitink, 2005; Adisa, 2009; Abdi and Jalali, 2013 and FS on grain losses (Geng et al., 1984; Swapan et al., 2001; Mostafavand and Kamgar, 2014; Hunt, 1995. Field tests were conducted at three levels of FS 1.5, 3 and 4.5 km.h-1; three levels of cutting height (CH 4, 8 and 13 cm and two levels of GMC, 8 and 14% on two varieties of lentils including Flip and Shiraz with three replications. Materials and Methods The feeder and cutter mechanism for chickpea harvesting that was the base design of device which is notched wheel and counter shear, was used. The other components of device were dividers, slat and chain feeders, belt and pulleys, chassis, elevator conveyor and storage. Two split plot design based on a randomized complete design was used to determine the effects of above treatments on lentil losses. Results and Discussion The ANOVA results indicated that the all studied factors; FS of feeder and cutter mechanism, CH and GMC had significant effect on losses of Shiraz variety (P0.05. The ranges of losses of Flip variety at 8% GMC were 8.6 to 10% for FS of 1.5 km.h-1, 9.1 to 10.4% for FS of 3 km.h-1and 10.4 to 11.4% for FS of 4.5 km h-1. These ranges at 14% GMC were 7.9 to 8.9% for FS of 1.5 km.h-1, 8.4 to 9.2% for FS of 3 km.h-1and 8.5 to 10% for FS of 4.5 km h-1. The ranges of

  1. The effectiveness of shin guards used by football players.

    Science.gov (United States)

    Tatar, Yasar; Ramazanoglu, Nusret; Camliguney, Asiye Filiz; Saygi, Evrim Karadag; Cotuk, Hasan Birol

    2014-01-01

    In football, injuries from opponent contact occur commonly in the lower extremities. FIFA the world's governing body for football requires players to wear shin guards. The aim of this study was to compare the protective effectiveness of polypropylene based shin guards with custom-made carbon fiber ones. Three commercial polypropylene shin guards (Adidas Predator™, Adidas UCL™, and Nike Mercurial™) and two custom-made carbon fiber shin guards were examined. The experimental setup had the following parts: 1) A pendulum attached a load cell at the tip (CAS Corp., Korea) and a fixed prosthetic foot equipped with a cleat to simulate an attacker's foot. 2) An artificial tibia prepared by condensed foam and reinforced by carbon fibers protected with soft clothing. 3) A multifunctional sensor system (Tekscan Corp., F-Socket System, Turkey) to record the impact on the tibia. In the low impact force trials, only 2.79-9.63 % of the load was transmitted to the sensors. When comparing for mean force, peak force and impulse, both carbon fiber shin guards performed better than the commercial ones (Adidas Predator™, Adidas UCL™, and Nike Mercurial™) (p = 0.000). Based on these same parameters, the Nike Mercurial™ provided better protection than the Adidas Predator™ and the Adidas UCL™ (p = 0.000). In the high impact force trials, only 5.16-10.90 % of the load was transmitted to the sensors. For peak force and impulse, the carbon fiber shin guards provided better protection than all the others. Carbon fiber shin guards possess protective qualities superior to those of commercial polypropylene shin guards. Key PointsShin guards decrease the risk of serious injuries.Carbon shin guards provide sufficient protection against high impact forces.Commercially available Polypropylene based shin guards do not provide sufficient protection against high impact forces.

  2. 46 CFR 177.940 - Guards in vehicle spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Guards in vehicle spaces. 177.940 Section 177.940... TONS) CONSTRUCTION AND ARRANGEMENT Rails and Guards § 177.940 Guards in vehicle spaces. On a vessel authorized to carry one or more vehicles, suitable chains, cables, or other barriers must be installed at the...

  3. Enduring the shipboard stressor complex: a systems approach.

    Science.gov (United States)

    Comperatore, Carlos A; Rivera, Pik Kwan; Kingsley, Leonard

    2005-06-01

    A high incidence of physiological and psychological stressors characterizes the maritime work environment in many segments of the commercial maritime industry and in the military. Traditionally, crewmembers work embedded in a complex of stressors. Stressors rarely act independently because most occur concurrently, simultaneously taxing physical and mental resources. Stressors such as extreme environmental temperatures, long work hours, heavy mental and physical workload, authoritative leadership, isolation from family and loved ones, lack of exercise, and unhealthy diets often combine to degrade crewmember health and performance, particularly on long voyages. This complex system of interacting stressors affects the ability of maritime crewmembers to maintain adequate levels of alertness and performance. An analytical systems approach methodology is described here as a viable method to identify workplace stressors and track their systemic interactions. A systems-based program for managing the stressor complex is then offered, together with the empirical research supporting its efficacy. Included is an example implementation of a stressor-control program aboard a U.S. Coast Guard cutter.

  4. Floristic account of the marine benthic algae from Jarvis Island and Kingman Reef, Line Islands, Central Pacific

    Directory of Open Access Journals (Sweden)

    Vroom, P.S.

    2012-05-01

    Full Text Available The marine benthic algae from Jarvis Island and Kingman Reef were identified from collections obtained from the Whippoorwill Expedition in 1924, the Itasca Expedition in 1935, the U.S. Coast Guard Cutter Taney in 1938, the Smithsonian Institution’s Pacific Ocean Biological Survey Program in 1964 and the U.S. National Oceanic and Atmospheric Administration’s Reef Assessment and Monitoring Program (RAMP in 2000, 2001, 2002, 2004 and 2006. A total of 124 species, representing 8 Cyanobacteria (blue-green algae, 82 Rhodophyta (red algae, 6 Heterokontophyta (brown algae and 28 Chlorophyta (green algae, are reported from both islands. Seventy-nine and 95 species of marine benthic algae are recorded from Jarvis Island and Kingman Reef, respectively. Of the 124 species, 77 species or 62% (4 blue-green algae, 57 red algae, 2 brown algae and 14 green algae have never before been reported from the 11 remote reefs, atolls and low islands comprising the Line Islands in the Central Pacific.

  5. 46 CFR 116.940 - Guards in vehicle spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Guards in vehicle spaces. 116.940 Section 116.940... ARRANGEMENT Rails and Guards § 116.940 Guards in vehicle spaces. On a vessel authorized to carry one or more vehicles, suitable chains, cables, or other barriers must be installed at the end of each vehicle runway...

  6. 75 FR 1706 - Drawbridge Operation Regulations; Upper Mississippi River, Dubuque, IA

    Science.gov (United States)

    2010-01-13

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket Number USCG-2009-1097] Drawbridge Operation Regulations; Upper Mississippi River, Dubuque, IA AGENCY: Coast Guard, DHS. ACTION: Notice of temporary deviation from regulations. SUMMARY: The Commander, Eighth Coast Guard District has...

  7. 76 FR 6694 - Drawbridge Operation Regulation; Upper Mississippi River, Keokuk, IA

    Science.gov (United States)

    2011-02-08

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket Number USCG-2011-0029] Drawbridge Operation Regulation; Upper Mississippi River, Keokuk, IA AGENCY: Coast Guard, DHS. ACTION: Notice of temporary deviation from regulations. SUMMARY: The Commander, Eighth Coast Guard District, has...

  8. 76 FR 33773 - Navigation Safety Advisory Council; Vacancies

    Science.gov (United States)

    2011-06-09

    ... Council; Vacancies AGENCY: Coast Guard, DHS. ACTION: Request for applications. SUMMARY: The Coast Guard seeks applications for membership on the Navigation Safety Advisory Council (NAVSAC). NAVSAC provides... the U.S. Coast Guard, on matters relating to prevention of maritime collisions, rammings, and...

  9. Issues related to choosing a guard force structure

    International Nuclear Information System (INIS)

    Auerback, C.; Cusack, J.; Green, L.; Higinbotham, W.; Indusi, J.; Marcuse, W.; Weinstock, E.

    1975-01-01

    The establishment of a federal security force has been suggested as an additional step to protect nuclear material. The force would be given the responsibility for guarding nuclear facilities and shipments of nuclear materials. This paper summarizes a study to identify the issues that are relevant to choosing between the private guard forces that are presently employed by industry or a guard force under federal authority. To examine the issues which would be relevant, three possible types of security force structures were selected for comparison: a federal force under central authority, a private guard force employed by or under contract to a facility, and a private arrangement to employ local police officers similar to the arrangement for armed guards at airports. The issues were divided into seven categories: (1) Legal Considerations, (2) Liability, (3) Staffing and Operations, (4) Costs, (5) Relationship to Off-site Forces, (6) Management and Control, (7) Transportation

  10. 77 FR 69761 - Drawbridge Operation Regulation; Upper Mississippi River, Clinton, IA

    Science.gov (United States)

    2012-11-21

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket No. USCG-2012-0995] Drawbridge Operation Regulation; Upper Mississippi River, Clinton, IA AGENCY: Coast Guard, DHS. ACTION: Notice of temporary deviation from regulations. SUMMARY: The Coast Guard has issued a temporary deviation from the...

  11. 75 FR 76279 - Drawbridge Operation Regulation; Upper Mississippi River, Burlington, IA

    Science.gov (United States)

    2010-12-08

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket No. USCG-2010-1058] Drawbridge Operation Regulation; Upper Mississippi River, Burlington, IA AGENCY: Coast Guard, DHS. ACTION: Notice of temporary deviation from regulations. SUMMARY: The Commander, Eighth Coast Guard District, has issued a...

  12. 78 FR 72022 - Drawbridge Operation Regulation; Upper Mississippi River, Dubuque, IA

    Science.gov (United States)

    2013-12-02

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket No. USCG-2013-0964] Drawbridge Operation Regulation; Upper Mississippi River, Dubuque, IA AGENCY: Coast Guard, DHS. ACTION: Notice of deviation from drawbridge regulation. SUMMARY: The Coast Guard has issued a temporary deviation from the...

  13. 76 FR 79066 - Drawbridge Operation Regulation; Upper Mississippi River, Clinton, IA

    Science.gov (United States)

    2011-12-21

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket No. USCG-2011-1018] Drawbridge Operation Regulation; Upper Mississippi River, Clinton, IA AGENCY: Coast Guard, DHS. ACTION: Notice of temporary deviation from regulations. SUMMARY: The Commander, Eighth Coast Guard District, has issued a...

  14. 76 FR 72308 - Drawbridge Operation Regulation; Upper Mississippi River, Dubuque, IA

    Science.gov (United States)

    2011-11-23

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket No. USCG-2011-1039] Drawbridge Operation Regulation; Upper Mississippi River, Dubuque, IA AGENCY: Coast Guard, DHS. ACTION: Notice of temporary deviation from regulations. SUMMARY: The Commander, Eighth Coast Guard District, has issued a...

  15. 78 FR 76750 - Drawbridge Operation Regulation; Upper Mississippi River, Clinton, IA

    Science.gov (United States)

    2013-12-19

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket No. USCG-2013-1008] Drawbridge Operation Regulation; Upper Mississippi River, Clinton, IA AGENCY: Coast Guard, DHS. ACTION: Notice of deviation from drawbridge regulations. SUMMARY: The Coast Guard has issued a temporary deviation from the...

  16. 75 FR 70817 - Drawbridge Operation Regulation; Upper Mississippi River, Dubuque, IA

    Science.gov (United States)

    2010-11-19

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket No. USCG-2010-1039] Drawbridge Operation Regulation; Upper Mississippi River, Dubuque, IA AGENCY: Coast Guard, DHS. ACTION: Notice of temporary deviation from regulations. SUMMARY: The Commander, Eighth Coast Guard District, has issued a...

  17. 75 FR 78162 - Drawbridge Operation Regulation; Upper Mississippi River, Clinton, IA

    Science.gov (United States)

    2010-12-15

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket No. USCG-2010-1084] Drawbridge Operation Regulation; Upper Mississippi River, Clinton, IA AGENCY: Coast Guard, DHS. ACTION: Notice of temporary deviation from regulations. SUMMARY: The Commander, Eighth Coast Guard District, has issued a...

  18. 77 FR 69759 - Drawbridge Operation Regulation; Upper Mississippi River, Dubuque, IA

    Science.gov (United States)

    2012-11-21

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket No. USCG-2012-1002] Drawbridge Operation Regulation; Upper Mississippi River, Dubuque, IA AGENCY: Coast Guard, DHS. ACTION: Notice of temporary deviation from regulations. SUMMARY: The Coast Guard has issued a temporary deviation from the...

  19. 76 FR 7757 - Hull Identification Numbers for Recreational Vessels

    Science.gov (United States)

    2011-02-11

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 181 [Docket No. USCG-2007-29236] Hull Identification Numbers for Recreational Vessels AGENCY: Coast Guard, DHS. ACTION: Follow-up to request for... expanded hull identification number (HIN). The Coast Guard's decision-making process included consideration...

  20. 78 FR 41304 - Navigation and Navigable Waters; Technical, Organizational, and Conforming Amendments; Correction

    Science.gov (United States)

    2013-07-10

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 105 [Docket No. USCG-2013-0397] RIN 1625-AC06 Navigation and Navigable Waters; Technical, Organizational, and Conforming Amendments; Correction AGENCY: Coast Guard, DHS. ACTION: Final rule; correction. SUMMARY: The Coast Guard published a final rule...

  1. 76 FR 12 - Drawbridge Operation Regulations; New Haven Harbor, Quinnipiac and Mill Rivers, New Haven, CT

    Science.gov (United States)

    2011-01-03

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket No. USCG-2010-1096] Drawbridge Operation Regulations; New Haven Harbor, Quinnipiac and Mill Rivers, New Haven, CT AGENCY: Coast Guard, DHS. ACTION: Notice of temporary deviation from regulations. SUMMARY: The Commander, First Coast Guard...

  2. 78 FR 31962 - Collection of Information Under Review by Office of Management and Budget

    Science.gov (United States)

    2013-05-28

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard [Docket No. USCG-2012-1066] Collection of Information... Labour Convention (MLC) Navigation and Vessel Inspection Circular (NVIC). The Coast Guard will publish a... Maritime Labour Convention, 2006. The Coast Guard plans to establish a voluntary inspection program for...

  3. Exe-Guard Project

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Rhett [Schweitzer Engineering Lab., Inc., Pullman, WA (United States); Marshall, Tim [Dominion Virginia Power, Richmond, VA (United States); Chavez, Adrian [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Bratus, Sergey [Dartmouth College, Hanover, NH (United States)

    2016-01-30

    The exe-Guard Project is an alliance between Dominion Virginia Power (DVP), Sandia National Laboratories (SNL), Dartmouth University, and Schweitzer Engineering Laboratories (SEL). SEL is primary recipient on this project. The exe-Guard project was selected for award under DE-FOA-0000359 with CFDA number 81.122 to address Topic Area of Interest 4: Hardened platforms and Systems. The exe-Guard project developed an antivirus solution for control system embedded devices to prevent the execution of unauthorized code and maintain settings and configuration integrity. This project created a white list antivirus solution for control systems capable of running on embedded Linux® operating systems. White list antivirus methods allow only credible programs to run through the use of digital signatures and hash functions. Once a system’s secure state is baselined, white list antivirus software denies deviations from that state because of the installation of malicious code as this changes hash results. Black list antivirus software has been effective in traditional IT environments but has negative implications for control systems. Black list antivirus uses pattern matching and behavioral analysis to identify system threats while relying on regular updates to the signature file and recurrent system scanning. Black list antivirus is vulnerable to zero day exploits which have not yet been incorporated into a signature file update. System scans hamper the performance of high availability applications, as revealed in NIST special publication 1058 which summarizes the impact of blacklist antivirus on control systems: Manual or “on-demand” scanning has a major effect on control processes in that they take CPU time needed by the control process (Sometimes close to 100% of CPU time). Minimizing the antivirus software throttle setting will reduce but not eliminate this effect. Signature updates can also take up to 100% of CPU time, but for a much shorter period than a typical

  4. Issues related to choosing a guard force structure

    International Nuclear Information System (INIS)

    Averbach, C.; Cusack, J.; Green, L.; Higinbotham, W.; Indusi, J.; Marcuse, W.; Weinstock, E.

    1975-01-01

    The establishment of a federal security force has been suggested as an additional step to protect nuclear material. The force would be given the responsibility for guarding nuclear facilities and shipments of nuclear materials. A study to identify the issues that are relevant to choosing between the private guard forces that are presently employed by industry or a guard force under federal authority is summarized. To examine the issues which would be relevant, three possible types of security force structures were selected for comparison: a federal force under central authority, a private guard force employed by or under contract to a facility, and a private arrangement to employ local police officers similar to the arrangement for armed guards at airports. The issues were divided into seven categories: (1) legal considerations, (2) liability, (3) staffing and operations, (4) costs, (5) relationship to off-site forces, (6) management and control, and (7) transportation. (U.S.)

  5. 75 FR 19304 - Safety Zones; Annual Fireworks Events in the Captain of the Port Detroit Zone

    Science.gov (United States)

    2010-04-14

    ... previously published in Coast Guard regulations. These safety zones are necessary to protect spectators...-AA00 Safety Zones; Annual Fireworks Events in the Captain of the Port Detroit Zone AGENCY: Coast Guard, DHS. ACTION: Notice of proposed rulemaking. SUMMARY: The Coast Guard proposes establishment of safety...

  6. 77 FR 35862 - Safety Zone; Fleet Week Maritime Festival, Pier 66 Elliott Bay, Seattle, WA

    Science.gov (United States)

    2012-06-15

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket No. USCG-2010-0062] Safety Zone; Fleet Week Maritime Festival, Pier 66 Elliott Bay, Seattle, WA AGENCY: Coast Guard, DHS. ACTION: Notice of enforcement of regulation. SUMMARY: The Coast Guard will enforce the Fleet Week Maritime...

  7. 76 FR 71581 - Collection of Information Under Review by Office of Management and Budget

    Science.gov (United States)

    2011-11-18

    ...., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above... are received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF....S. Coast Guard, Assistant Commandant for Command, Control, Communications, Computers and Information...

  8. 29 CFR 1910.213 - Woodworking machinery requirements.

    Science.gov (United States)

    2010-07-01

    ... location, making it unnecessary for him to reach over the cutter to make adjustments. This does not apply... knife projection of which shall not exceed one-eighth inch beyond the cylindrical body of the head. (2... operator's hand from coming in contact with the revolving knives. The guard shall automatically adjust...

  9. Variability in the Foraging Distribution and Diet of Cape Gannets between the Guard and Post-guard Phases of the Breeding Cycle

    Directory of Open Access Journals (Sweden)

    Jonathan A. Botha

    2018-02-01

    Full Text Available During breeding, seabirds are central place foragers and are sensitive to changes in local prey availability. As the breeding season progresses, foraging behavior and distribution is expected to change in response to possible changes in local prey availability. In addition, adult gender, and the increasing nutritional demands of a growing chick may also influence the foraging behavior of individuals. At present, relatively few studies have assessed the foraging behavior of adult birds during the late post-guard stages of chick rearing. Through a combination of GPS tracking and diet sampling we investigated the foraging distances, spatial distribution, and prey composition of adult Cape gannets (Morus capensis during the guard and post-guard stages of chick rearing. We found no clear evidence for consistent sex-specific differences in foraging distances and spatial distribution during the guard stage, although marginal differences in the location of core foraging areas during the post-guard stage were apparent. Results, however, revealed a clear increase in foraging range from the early guard to the late post-guard stage of chick rearing. During December the diet was comprised almost exclusively of anchovy (Engraulis encrasicolus, the proportion of which had decreased significantly in the diet by January. This was mirrored by a substantial increase in the proportion of saury (Scomberesox saurus. These results suggest that Cape gannets show flexibility in the foraging behavior and diet, which may be related to changes in the abundance and distribution of prey or may reflect changes in the energetic requirements of the growing offspring. This study provides the first assessment of Cape gannet foraging behavior and spatial distribution during the post-guard stage of chick rearing. The importance of considering intra-annual variability in foraging distribution when using seabird tracking data in trophic and marine spatial planning studies are

  10. SeeCoast: persistent surveillance and automated scene understanding for ports and coastal areas

    Science.gov (United States)

    Rhodes, Bradley J.; Bomberger, Neil A.; Freyman, Todd M.; Kreamer, William; Kirschner, Linda; L'Italien, Adam C.; Mungovan, Wendy; Stauffer, Chris; Stolzar, Lauren; Waxman, Allen M.; Seibert, Michael

    2007-04-01

    SeeCoast is a prototype US Coast Guard port and coastal area surveillance system that aims to reduce operator workload while maintaining optimal domain awareness by shifting their focus from having to detect events to being able to analyze and act upon the knowledge derived from automatically detected anomalous activities. The automated scene understanding capability provided by the baseline SeeCoast system (as currently installed at the Joint Harbor Operations Center at Hampton Roads, VA) results from the integration of several components. Machine vision technology processes the real-time video streams provided by USCG cameras to generate vessel track and classification (based on vessel length) information. A multi-INT fusion component generates a single, coherent track picture by combining information available from the video processor with that from surface surveillance radars and AIS reports. Based on this track picture, vessel activity is analyzed by SeeCoast to detect user-defined unsafe, illegal, and threatening vessel activities using a rule-based pattern recognizer and to detect anomalous vessel activities on the basis of automatically learned behavior normalcy models. Operators can optionally guide the learning system in the form of examples and counter-examples of activities of interest, and refine the performance of the learning system by confirming alerts or indicating examples of false alarms. The fused track picture also provides a basis for automated control and tasking of cameras to detect vessels in motion. Real-time visualization combining the products of all SeeCoast components in a common operating picture is provided by a thin web-based client.

  11. 76 FR 70350 - West Oahu Offshore Security Zone

    Science.gov (United States)

    2011-11-14

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket No. USCG-2011-1048] RIN 1625-AA87 West Oahu Offshore Security Zone AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary security zone on the navigable waters of Oahu's western...

  12. 76 FR 3014 - Security Zone; Protection of Military Cargo, Captain of the Port Zone Puget Sound, WA

    Science.gov (United States)

    2011-01-19

    ... Coast Guard will enforce the Blair Waterway security zone in Commencement Bay, WA for protection of... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket No. USCG-2011-0015] Security Zone; Protection of Military Cargo, Captain of the Port Zone Puget Sound, WA AGENCY: Coast Guard, DHS...

  13. 75 FR 31459 - Collection of Information Under Review by Office of Management and Budget: OMB Control Number...

    Science.gov (United States)

    2010-06-03

    ...) To OIRA, 725 17th Street, NW., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3... timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF maintains the public..., U.S. Coast Guard, Acting Assistant Commandant for Command, Control, Communications, Computers and...

  14. 77 FR 26561 - Collection of Information Under Review by Office of Management and Budget

    Science.gov (United States)

    2012-05-04

    ...., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above... received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF maintains.... Day, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Command, Control, Communications...

  15. 75 FR 39552 - Collection of Information Under Review by Office of Management and Budget; OMB Control Number...

    Science.gov (United States)

    2010-07-09

    ...) To OIRA, 725 17th Street, NW., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3... timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF maintains the public..., U.S. Coast Guard, Acting Assistant Commandant for Command, Control, Communications, Computers and...

  16. 78 FR 7331 - SLR; Fajardo Offshore Grand Prix; Rada Fajardo; Fajardo, PR

    Science.gov (United States)

    2013-02-01

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 100 [Docket Number USCG-2012-1098] RIN 1625-AA08 SLR; Fajardo Offshore Grand Prix; Rada Fajardo; Fajardo, PR AGENCY: Coast Guard, DHS. ACTION: Notice of Proposed Rulemaking. SUMMARY: The Coast Guard is establishing a special local regulation on the...

  17. 76 FR 10385 - Information Collection Request to Office of Management and Budget; OMB Control Number: 1625-0106

    Science.gov (United States)

    2011-02-24

    ... Office of Management and Budget; OMB Control Number: 1625-0106 AGENCY: Coast Guard, DHS. ACTION: Sixty....S. Coast Guard intends to submit an Information Collection Request (ICR) to the Office of Management... Coast Guard docket number [USCG-2011-0087] to the Docket Management Facility (DMF) at the U.S...

  18. Oracle Data Guard 11gR2 administration beginner's guide

    CERN Document Server

    Baransel, Emre

    2013-01-01

    Using real-world examples and hands-on tasks, Oracle Data Guard 11gR2 Administration Beginner's Guide will give you a solid foundation in Oracle Data Guard. It has been designed to teach you everything you need to know to successfully create and operate Data Guard environments with maximum flexibility, compatibility, and effectiveness.If you are an Oracle database administrator who wants to configure and administer Data Guard configurations, then ""Oracle Data Guard 11gR2 Administration Beginner's Guide"" is for you. With a basic understanding of Oracle database administration, you'll be able

  19. 77 FR 37600 - Safety Zone; Arctic Drilling and Support Vessels, Puget Sound, WA

    Science.gov (United States)

    2012-06-22

    ... 1625-AA00 Safety Zone; Arctic Drilling and Support Vessels, Puget Sound, WA AGENCY: Coast Guard, DHS... are underway in the Puget Sound Captain of the Port Zone. The safety zone is necessary to ensure the... Ensign Anthony P. LaBoy, Waterways Management Division, Coast Guard Sector Puget Sound; Coast Guard...

  20. 78 FR 44265 - Unified Agenda of Federal Regulatory and Deregulatory Actions

    Science.gov (United States)

    2013-07-23

    ... Delegation No 0170.1 Abstract: The Coast Guard is the lead Federal agency for workplace safety and health on...: Dan Lawrence, Program Manager, CG-OES-2, Department of Homeland Security, U.S. Coast Guard, Commandant...'Brien, Project Manager, Department of Homeland Security, U.S. Coast Guard, Commandant, (CG-FAC-2), 2100...

  1. 75 FR 20856 - Towing Safety Advisory Committee; Vacancies

    Science.gov (United States)

    2010-04-21

    ... depending on fiscal budgetary constraints. In support of the policy of the Coast Guard on gender and ethnic diversity, we encourage qualified women and members of minority groups to apply. The Coast Guard values diversity; all the different characteristics and attributes that enhance the mission of the Coast Guard. If...

  2. 77 FR 9949 - Collection of Information Under Review by Office of Management and Budget

    Science.gov (United States)

    2012-02-21

    ... Street NW., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF... comments are received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF.... R.E. Day, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Command, Control, Communications...

  3. 78 FR 65349 - Collection of Information Under Review by Office of Management and Budget

    Science.gov (United States)

    2013-10-31

    ...., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above... received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF maintains... 24, 2013. R.E. Day, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Command, Control...

  4. 76 FR 72959 - Collection of Information Under Review by Office of Management and Budget

    Science.gov (United States)

    2011-11-28

    ...., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above... are received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF.... R.E. Day, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Command, Control, Communications...

  5. 77 FR 1942 - Collection of Information Under Review by Office of Management and Budget

    Science.gov (United States)

    2012-01-12

    ...., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above... are received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF... 23, 2011. R.E. Day, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Command, Control...

  6. 78 FR 52939 - Collection of Information under Review by Office of Management and Budget

    Science.gov (United States)

    2013-08-27

    ...., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above... comments are received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF..., 2013. R.E. Day, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Command, Control...

  7. 78 FR 74156 - Collection of Information Under Review by Office of Management and Budget

    Science.gov (United States)

    2013-12-10

    ..., attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above, between 9 a.m. and 5 p... timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF maintains the public.... Day, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Command, Control, Communications...

  8. 77 FR 37604 - Safety Zone; Fourth of July Fireworks, Berkeley Marina, Berkeley, CA

    Science.gov (United States)

    2012-06-22

    ...: The Coast Guard will enforce a 1,000 foot safety zone around the Berkeley Pier in position 37[deg]51... Zone; Fourth of July Fireworks, Berkeley Marina, Berkeley, CA AGENCY: Coast Guard, DHS. ACTION: Notice of enforcement of regulation. SUMMARY: The Coast Guard will enforce the safety zone for the Berkeley...

  9. Fatigue fracture of cutter blade made of high-speed steel

    Directory of Open Access Journals (Sweden)

    Beata Letkowska

    2015-04-01

    Full Text Available The quality of the surface of cyclically loaded components is very important. Many observations confirm that the root cause of the micro cracks (causing the fatigue fracture are primarily a surface's defects appearing during production process. These surface defects can be also caused by engraving processes used to perform identification marks. This paper presents the failure analysis of broken blade of the cutter Ku 500VX. The blade was subject of standard metallographic examination, hardness measurements, fractography analysis and metallographic studies using stereoscopic, light and scanning electron microscopes. The damage of the blade was caused by changes of the structure (formation of the brittle micro dendritic structure that occurred during manual electric engraving process when the material was heated till its melting point. As a result the stresses occurred in surface what provided to micro cracking and to propagate the fatigue fracture. The origin of this fatigue fracture was in the place where the inscription was made.

  10. Denotational semantics for guarded dependent type theory

    DEFF Research Database (Denmark)

    Bizjak, Aleš; Møgelberg, Rasmus Ejlers

    2018-01-01

    We present a new model of Guarded Dependent Type Theory (GDTT), a type theory with guarded recursion and multiple clocks in which one can program with, and reason about coinductive types. Productivity of recursively defined coinductive programs and proofs is encoded in types using guarded recursion......, crucial for programming with coinductive types, types must be interpreted as presheaves orthogonal to the object of clocks. In the case of dependent types, this translates to a unique lifting condition similar to the one found in homotopy theoretic models of type theory. Since the universes defined...... by inclusions of clock variable contexts commute on the nose with type operations on the universes....

  11. Suitability of Nickel Chromium Wire Cutters as Deployable Release Mechanisms on CubeSats in Low Earth Orbit

    OpenAIRE

    Gardiner, James

    2015-01-01

    This paper investigates the suitability of a nickel chromium wire cutter (NCWC) for use on the GASPACS (Get Away Special Passive Attitude Control Satellite) Mission. It is intended that when activated the NCWC will cut through a restraining wire and thereby release the stored energy of the deployable AeroBoom. Flight worthiness is based on favorable performance during functional testing to address known issues with the NCWC, such as wire burn through and cutting issues. In-depth testing discu...

  12. Roles for National Guard Components: Current Thoughts and Future Possibilities

    Science.gov (United States)

    2000-04-01

    Gen Russell C. Davis, chief, National Guard Bureau, remarks at the National Chamber of Commerce , Washington, D.C., June 1999. 5 Moskos and Burk, 176...Lt Gen Russell C. Davis, chief, National Guard Bureau, remarks at the National Chamber of Commerce , Washington, D.C., June 9 1999. 5 National Guard...National Guard Bureau, remarks to the National Chamber of Commerce , Washington, D.C., June 1999, n.p. On-line. Internet, 27 February 2000, available at

  13. 77 FR 56549 - Safety Zone; Blue Angels at Kaneohe Bay Air Show, Oahu, HI

    Science.gov (United States)

    2012-09-13

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket Number USCG-2012-0739] RIN 1625-AA00 Safety Zone; Blue Angels at Kaneohe Bay Air Show, Oahu, HI AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary safety zone while the U.S. Navy...

  14. 75 FR 50952 - Safety Zone; Blue Angels at Kaneohe Bay Air Show, Oahu, HI

    Science.gov (United States)

    2010-08-18

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket No. USCG-2010-0705] RIN 1625-AA00 Safety Zone; Blue Angels at Kaneohe Bay Air Show, Oahu, HI AGENCY: Coast Guard, DHS. ACTION: Notice of proposed rulemaking. SUMMARY: The Coast Guard proposes two temporary safety zones while the U.S...

  15. 77 FR 28255 - Safety Zone; Upper Mississippi River, Mile 183.0 to 183.5

    Science.gov (United States)

    2012-05-14

    ... on the Upper Mississippi River. Discussion of Rule The Coast Guard is establishing a temporary safety...-AA00 Safety Zone; Upper Mississippi River, Mile 183.0 to 183.5 AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary safety zone for all waters of the...

  16. 77 FR 31629 - Collection of Information Under Review by Office of Management and Budget

    Science.gov (United States)

    2012-05-29

    ...., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above... received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF maintains... amended. Dated: May 21, 2012. R.E. Day, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Command...

  17. 75 FR 28275 - Collection of Information Under Review by Office of Management and Budget; OMB Control Number...

    Science.gov (United States)

    2010-05-20

    ... Street, NW., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Fax. (a) To DMF, 202... the fax, attention Desk Officer for the Coast Guard. The DMF maintains the public docket for this...: May 10, 2010. M.B. Lytle, Captain, U.S. Coast Guard, Acting Assistant Commandant for Command, Control...

  18. 77 FR 70797 - Collection of Information Under Review by Office of Management and Budget

    Science.gov (United States)

    2012-11-27

    ...., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above... received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF maintains.... Dated: November 16, 2012. R.E. Day, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Command...

  19. Elastic-plastic dynamic behavior of guard pipes due to sudden opening of longitudinal cracks in the inner pipe and crash to the guard pipe wall

    International Nuclear Information System (INIS)

    Theuer, E.; Heller, M.

    1979-01-01

    Integrity of guard pipes is an important parameter in the design of nuclear steam supply systems. A guard pipe shall withstand all kinds of postulated inner pipe breaks without failure. Sudden opening of a crack in the inner pipe and crash of crack borders to the guard pipe wall represent a shock problem where complex phenomena of dynamic plastification as well as dynamic behavior of the entire system have to be taken in consideration. The problem was analyzed by means of Finite Element computation using the general purpose program MARC. Equation of motion was resolved by direct integration using the Newmark β-operator. Analysis shows that after 1,2 m sec crack borders touch the guard pipe wall for the first time. At this moment a considerable amount of local plastification appears in the inner pipe wall, while the guard pipe is nearly unstressed. After initial touching, the crack borders begin to slip along the guard pipe wall. Subsequently, a short withdrawal of the crack borders and a new crash occur, while the inner pipe rolls along the guard pipe wall. The analysis procedure described is suitable for designing numerous guard pipe geometries as well as U-Bolt restraint systems which have to withstand high-energy pipe rupture impact. (orig.)

  20. 30 CFR 77.1011 - Drill holes; guarding.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Drill holes; guarding. 77.1011 Section 77.1011 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH... Control § 77.1011 Drill holes; guarding. Drill holes large enough to constitute a hazard shall be covered...

  1. A Failure Analysis Conducted on a Fractured AISI 5160 Steel Blade Which Separated from an Agricultural Rotary Cutter

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Alan A [Metals Research Inc., 101 West Chestnut St., Louisville, Kentucky, 40202 (United States); Storey, Randall J, E-mail: barbalan@bellsouth.net [Deptartment of Industrial Engineering, University of Louisville, Louisville, Kentucky, 40292 (United States)

    2011-07-19

    One of the six blades of an agricultural rotary cutter used for cutting down small trees and bushes broke into two pieces while the blades were rotating. One piece was hurled from the cutter and struck a young farmer, who had been operating the machine, causing a near fatal leg injury. In the ensuing litigation against the manufacturers and marketer of the machine each litigant retained a metallurgist and other experts. The metallurgists jointly directed laboratory work on the broken blade conducted at an independent laboratory according to a protocol which they developed and which was approved by the court. As a result of the laboratory work the present authors, working for the Plaintiffs, concluded that failure of the blade occurred because it contained quench cracks introduced when it was manufactured. The Defendants' metallurgists concluded that the blade had been misassembled onto the machine and, as a result, had failed by fatigue. Eventually, the case was set for a jury trial in a Circuit Court in rural Kentucky. The jury found for the Plaintiffs and awarded them $5.9 million in damages. Part of this judgement was later reversed by the Kentucky Court of Appeals and the case was then settled without a second trial under terms which were not revealed.

  2. A Failure Analysis Conducted on a Fractured AISI 5160 Steel Blade Which Separated from an Agricultural Rotary Cutter

    International Nuclear Information System (INIS)

    Johnson, Alan A; Storey, Randall J

    2011-01-01

    One of the six blades of an agricultural rotary cutter used for cutting down small trees and bushes broke into two pieces while the blades were rotating. One piece was hurled from the cutter and struck a young farmer, who had been operating the machine, causing a near fatal leg injury. In the ensuing litigation against the manufacturers and marketer of the machine each litigant retained a metallurgist and other experts. The metallurgists jointly directed laboratory work on the broken blade conducted at an independent laboratory according to a protocol which they developed and which was approved by the court. As a result of the laboratory work the present authors, working for the Plaintiffs, concluded that failure of the blade occurred because it contained quench cracks introduced when it was manufactured. The Defendants' metallurgists concluded that the blade had been misassembled onto the machine and, as a result, had failed by fatigue. Eventually, the case was set for a jury trial in a Circuit Court in rural Kentucky. The jury found for the Plaintiffs and awarded them $5.9 million in damages. Part of this judgement was later reversed by the Kentucky Court of Appeals and the case was then settled without a second trial under terms which were not revealed.

  3. The Effectiveness of Shin Guards Used by Football Players

    Directory of Open Access Journals (Sweden)

    Yasar Tatar

    2013-03-01

    Full Text Available In football, injuries from opponent contact occur commonly in the lower extremities. FIFA the world’s governing body for football requires players to wear shin guards. The aim of this study was to compare the protective effectiveness of polypropylene based shin guards with custom-made carbon fiber ones. Three commercial polypropylene shin guards (Adidas Predator™, Adidas UCL™, and Nike Mercurial™ and two custom-made carbon fiber shin guards were examined. The experimental setup had the following parts: 1 A pendulum attached a load cell at the tip (CAS Corp., Korea and a fixed prosthetic foot equipped with a cleat to simulate an attacker’s foot. 2 An artificial tibia prepared by condensed foam and reinforced by carbon fibers protected with soft clothing. 3 A multifunctional sensor system (Tekscan Corp., F-Socket System, Turkey to record the impact on the tibia. In the low impact force trials, only 2.79-9.63 % of the load was transmitted to the sensors. When comparing for mean force, peak force and impulse, both carbon fiber shin guards performed better than the commercial ones (Adidas Predator™, Adidas UCL™, and Nike Mercurial™ (p = 0.000. Based on these same parameters, the Nike Mercurial™ provided better protection than the Adidas Predator™ and the Adidas UCL™ (p = 0.000. In the high impact force trials, only 5.16-10.90 % of the load was transmitted to the sensors. For peak force and impulse, the carbon fiber shin guards provided better protection than all the others. Carbon fiber shin guards possess protective qualities superior to those of commercial polypropylene shin guards.

  4. 76 FR 71987 - Collection of Information Under Review by Office of Management and Budget

    Science.gov (United States)

    2011-11-21

    ..., attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above, between 9 a.m. and 5 p... timely manner, mark the fax, attention Desk Officer for the Coast Guard. The DMF maintains the public.... Dated: November 10, 2011. R.E. Day, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Command...

  5. 41 CFR 50-204.5 - Machine guarding.

    Science.gov (United States)

    2010-07-01

    ... be such that it does not offer an accident hazard in itself. (c) Point of Operation Guarding. (1) Point of operation is the area on a machine where work is actually performed upon the material being... guarding device shall be so designed and constructed so as to prevent the operator from having any part of...

  6. Building an FTP guard

    Energy Technology Data Exchange (ETDEWEB)

    Sands, P.D.

    1998-08-01

    Classified designs usually include lesser classified (including unclassified) components. An engineer working on such a design needs access to the various sub-designs at lower classification levels. For simplicity, the problem is presented with only two levels: high and low. If the low-classification component designs are stored in the high network, they become inaccessible to persons working on a low network. In order to keep the networks separate, the component designs may be duplicated in all networks, resulting in a synchronization problem. Alternatively, they may be stored in the low network and brought into the high network when needed. The latter solution results in the use of sneaker-net (copying the files from the low system to a tape and carrying the tape to a high system) or a file transfer guard. This paper shows how an FTP Guard was constructed and implemented without degrading the security of the underlying B3 platform. The paper then shows how the guard can be extended to an FTP proxy server or an HTTP proxy server. The extension is accomplished by allowing the high-side user to select among items that already exist on the low-side. No high-side data can be directly compromised by the extension, but a mechanism must be developed to handle the low-bandwidth covert channel that would be introduced by the application.

  7. 30 CFR 56.12023 - Guarding electrical connections and resistor grids.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Guarding electrical connections and resistor... MINES Electricity § 56.12023 Guarding electrical connections and resistor grids. Electrical connections and resistor grids that are difficult or impractical to insulate shall be guarded, unless protection...

  8. 14-3-3 Proteins in Guard Cell Signaling.

    Science.gov (United States)

    Cotelle, Valérie; Leonhardt, Nathalie

    2015-01-01

    Guard cells are specialized cells located at the leaf surface delimiting pores which control gas exchanges between the plant and the atmosphere. To optimize the CO2 uptake necessary for photosynthesis while minimizing water loss, guard cells integrate environmental signals to adjust stomatal aperture. The size of the stomatal pore is regulated by movements of the guard cells driven by variations in their volume and turgor. As guard cells perceive and transduce a wide array of environmental cues, they provide an ideal system to elucidate early events of plant signaling. Reversible protein phosphorylation events are known to play a crucial role in the regulation of stomatal movements. However, in some cases, phosphorylation alone is not sufficient to achieve complete protein regulation, but is necessary to mediate the binding of interactors that modulate protein function. Among the phosphopeptide-binding proteins, the 14-3-3 proteins are the best characterized in plants. The 14-3-3s are found as multiple isoforms in eukaryotes and have been shown to be involved in the regulation of stomatal movements. In this review, we describe the current knowledge about 14-3-3 roles in the regulation of their binding partners in guard cells: receptors, ion pumps, channels, protein kinases, and some of their substrates. Regulation of these targets by 14-3-3 proteins is discussed and related to their function in guard cells during stomatal movements in response to abiotic or biotic stresses.

  9. Development of a cutter-chipper prototype for tree stands; Pystypuuston katkaisuhakettimen proto

    Energy Technology Data Exchange (ETDEWEB)

    Polus, P [Tmi P. Polus, Raahe (Finland)

    1997-12-01

    Collection of chips and energy wood with conventional methods involves too many operations and hence results in a too high price of chips. The aim of the project was to develop a cutter-chipper suitable for chipping energy and pulp wood from tree stands. This equipment cuts and chips growing trees with branches and tops at site. Many stages involved in chipping would be eliminated and hence the price of chips would be more competitive, for example, with that of peat. In preliminary experiments, the prototype operated as expected. The product chips were homogeneous, did not contain long fractions or branch bits, and the chip size was. The chips were moved into the container by a conveyor. The sale of manufacturing rights for the equipment is under consideration. (orig.)

  10. NOAA Response to the Deepwater Horizon Oil Spill - Protecting Oceans, Coasts and Fisheries (Invited)

    Science.gov (United States)

    Lubchenco, J.

    2010-12-01

    As the nation’s leading scientific resource for oil spills, NOAA has been on the scene of the Deepwater Horizon/BP oil spill from the start, providing coordinated scientific weather and biological response services to federal, state and local organizations. NOAA has mobilized experts from across the agency to help contain the spreading oil spill and protect the Gulf of Mexico’s many marine mammals, sea turtles, fish, shellfish and other endangered marine life. NOAA spill specialists advised the U.S. Coast Guard on cleanup options as well as advising all affected federal, state and local partners on sensitive marine resources at risk in this area of the Gulf of Mexico. As a major partner in the federal response to this incident, NOAA provided the necessary coastal and marine expertise required for sound, timely decision-making and helped protect the affected Gulf Coast communities and coastal marine environment and will continue to do so for ongoing restoration efforts.

  11. Armed guards on vessels : insurance and liability

    Directory of Open Access Journals (Sweden)

    Mišo Mudrić

    2011-12-01

    Full Text Available The Paper examines the insurance and liability issues resulting from the use of armed guards on board vessels. The study begins with an overview of the available data on key economic fi gures representing the projected overall annual costs of modern piracy. The focus is then shifted to the issue of public versus private security, where possible dangers of private-based security options are discussed in general. After explaining why the Somalia region deserves a closer attention when compared to other pirate-infested waters, a brief summary of the international effort to combat piracy threat is presented, followed by a structured overview of the use of private maritime security options in the maritime sector in general. One security option is the use of armed guards on board vessels. This option is explored both from the political (the acceptance by stakeholders and legal standpoint (legal issues arising from the use of armed guards. An important remedy for the shipping companies/ operators threatened by the piracy hazard is the existence of affordable and effective (specialized marine insurance. A study of available piracy insurance policies is presented, followed by an analysis of case law and other legal issues arising from piracy attacks, which could prove important when considering the legal implications of armed guards employment. Finally, a simplifi ed economic analysis of available security options is presented, followed by the final assessment of benefi ts derived from the use of armed guards.

  12. Guarded dependent type theory with coinductive types

    DEFF Research Database (Denmark)

    Bizjak, Aleš; Grathwohl, Hans Bugge; Clouston, Ranald

    2016-01-01

    We present guarded dependent type theory, gDTT, an extensional dependent type theory with a later' modality and clock quantifiers for programming and proving with guarded recursive and coinductive types. The later modality is used to ensure the productivity of recursive definitions in a modular......, type based, way. Clock quantifiers are used for controlled elimination of the later modality and for encoding coinductive types using guarded recursive types. Key to the development of gDTT are novel type and term formers involving what we call delayed substitutions’. These generalise the applicative...... functor rules for the later modality considered in earlier work, and are crucial for programming and proving with dependent types. We show soundness of the type theory with respect to a denotational model....

  13. 30 CFR 77.509 - Transformers; installation and guarding.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Transformers; installation and guarding. 77.509... COAL MINES Electrical Equipment-General § 77.509 Transformers; installation and guarding. (a... feet from any energized parts, casings, or wiring. (b) Transformer stations shall be enclosed to...

  14. 30 CFR 77.510 - Resistors; location and guarding.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Resistors; location and guarding. 77.510 Section 77.510 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE... COAL MINES Electrical Equipment-General § 77.510 Resistors; location and guarding. Resistors, heaters...

  15. National Guard Forces in the Cyber Domain

    Science.gov (United States)

    2015-05-22

    TITLE AND SUBTITLE National Guard Forces in the Cyber Domain 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...Soldiers. Army Cyber Command (ARCYBER) commander, Lieutenant General Edward Cardon stated that Guard will begin to build combat power with...90 2014 Quadrennial Defense Review, 15. 91 Ibid. 92 Edward C. Cardon , "ARMY.MIL, The Official Homepage of the United

  16. Security Guards and Counter-terrorism: Tourism and Gaps in Terrorism Prevention

    Directory of Open Access Journals (Sweden)

    Luke Howie

    2014-11-01

    Full Text Available Organisation operating in the tourism industry are high priority targets for terrorists. In the aftermath of the 9/11 attacks tourism destinations, hotels and modes of public transportation have regularly been targeted by terrorists seeking to convey their violent message. As such, leaders and managers in the tourism industry carefully plan their security and counter-terrorism responses, often involving the hiring of security guards. It is here that I believe a significant gap in counter-terrorism preparedness exists. I argue that protecting tourism destinations is only possible if consideration is given the effectiveness of security guards and understanding that their well-being will impact upon their ability to deliver security. I want to draw attention to the often ignored social role of security guards. On 9/11, 42 security guards died whilst helping save the lives of thousands. They performed their jobs admirably, despite being low-paid, under-appreciated workers. In this paper I explore the social role of security guards in the context of tourism security. By drawing on representations of security guards in popular culture and reports on the state of the security guard industry. I argue that the lack of attention on the quality and well-being of guards is a significant black-spot in tourism security and terrorism preparedness.

  17. Women's Fertility Status Alters Other Women's Jealousy and Mate Guarding.

    Science.gov (United States)

    Hurst, Ashalee C; Alquist, Jessica L; Puts, David A

    2017-02-01

    Across three studies, we tested the hypothesis that women exhibit greater jealousy and mate guarding toward women who are in the high (vs. low) fertility phase of their cycle. Women who imagined their partner with a woman pictured at high fertility reported more jealousy than women who imagined their partner with a woman pictured at low fertility (Studies 1 and 2). A meta-analysis across studies manipulating fertility status of the pictured woman found a significant effect of fertility status on both jealousy and mate guarding. Women with attractive partners viewed fertile-phase women as less trustworthy, which led to increased mate guarding (Study 2). In Study 3, the closer women were to peak fertility, the more instances they reported of other women acting jealously and mate guarding toward them. These studies provide evidence that women selectively exhibit jealousy and mate guarding toward women who are near peak fertility.

  18. Distribution of marine birds on Georges Bank and Adjacent waters. Progress report No. 2, April--June 1978

    Energy Technology Data Exchange (ETDEWEB)

    Powers, K.D.

    1978-07-01

    From 27 March to 20 June 1978, 7 cruises aboard U.S. Coast Guard cutters DECISIVE, VIGILANT, and VIGOROUS and the National Marine Fisheries Service research vessel ALBATROSS IV were made on outer continental shelf waters in regions from the mid-Atlantic to the Gulf of Maine and Scotian Shelf. A total of 13916 marine birds of at least 27 species were counted in 711.16 km/sup 2/ sampled from 730 fixed-area transects (300m wide by 10 minutes cruising time). An equal number of 10-minute total bird counts (no fixed area) were conducted at the same time. All of MBO cruises conducted in 1978 have been transcribed onto computer data sheets and were proofed and verified. Seven of 24 MBO cruises made in 1977 have been transcribed. U.S. Fish and Wildlife Service Migratory Bird and Habitat Research Laboratory will keypunch the data. From a review of over 100 scientific papers and books, food habits of fulmars, shearwaters, storm-petrels, gannets, gulls, and alcids were referenced by bird species and author.

  19. 77 FR 44544 - Safety Zone; Gilmerton Bridge Center Span Float-In, Elizabeth River; Norfolk, Portsmouth, and...

    Science.gov (United States)

    2012-07-30

    ...'' box, and then clicking ``Search.'' FOR FURTHER INFORMATION CONTACT: If you have questions about this... Guard; telephone 757-668-5581, email [email protected] . If you have questions on viewing... Chesapeake, VA AGENCY: Coast Guard, DHS. ACTION: Proposed rule; withdrawal. SUMMARY: The Coast Guard is...

  20. Male songbirds provide indirect parental care by guarding females during incubation

    Science.gov (United States)

    Fedy, B.C.; Martin, T.E.

    2009-01-01

    Across many taxa, guarding of fertile mates is a widespread tactic that enhances paternity assurance. However, guarding of mates can also occur during the nonfertile period, and the fitness benefits of this behavior are unclear. Male songbirds, for example, sometimes guard nonfertile females during foraging recesses from incubation. We hypothesized that guarding postreproductive mates may have important, but unrecognized, benefits by enhancing female foraging efficiency, thereby increasing time spent incubating eggs. We tested the hypothesis in 2 songbird species by examining female behavior during natural and experimentally induced absences of males. Male absence caused increased vigilance in foraging females that decreased their efficiency and resulted in less time spent incubating eggs. Male guarding of nonfertile females can thus provide a previously unrecognized form of indirect parental care.

  1. What is a "good" encoding of guarded choice?

    DEFF Research Database (Denmark)

    Nestmann, Uwe

    2000-01-01

    into the latter that preserves divergence-freedom and symmetries. This paper argues that there are nevertheless "good" encodings between these calculi. In detail, we present a series of encodings for languages with (1) input-guarded choice, (2) both input and output-guarded choice, and (3) mixed-guarded choice......, and investigate them with respect to compositionality and divergence-freedom. The first and second encoding satisfy all of the above criteria, but various "good" candidates for the third encoding-inspired by an existing distributed implementation-invalidate one or the other criterion, While essentially confirming...... Palamidessi's result, our study suggests that the combination of strong compositionality and divergence-freedom is too strong for more practical purposes. (C) 2000 Academic Press....

  2. Preprocessor with spline interpolation for converting stereolithography into cutter location source data

    Science.gov (United States)

    Nagata, Fusaomi; Okada, Yudai; Sakamoto, Tatsuhiko; Kusano, Takamasa; Habib, Maki K.; Watanabe, Keigo

    2017-06-01

    The authors have developed earlier an industrial machining robotic system for foamed polystyrene materials. The developed robotic CAM system provided a simple and effective interface without the need to use any robot language between operators and the machining robot. In this paper, a preprocessor for generating Cutter Location Source data (CLS data) from Stereolithography (STL data) is first proposed for robotic machining. The preprocessor enables to control the machining robot directly using STL data without using any commercially provided CAM system. The STL deals with a triangular representation for a curved surface geometry. The preprocessor allows machining robots to be controlled through a zigzag or spiral path directly calculated from STL data. Then, a smart spline interpolation method is proposed and implemented for smoothing coarse CLS data. The effectiveness and potential of the developed approaches are demonstrated through experiments on actual machining and interpolation.

  3. 75 FR 19414 - Collection of Information Under Review by Office of Management and Budget: OMB Control Number...

    Science.gov (United States)

    2010-04-14

    ... Street, NW., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Fax. (a) To DMF, 202... the fax, attention Desk Officer for the Coast Guard. The DMF maintains the public docket for this... Guard, Acting Assistant Commandant for Command, Control, Communications, Computers and Information...

  4. Design and evaluation of a low thermal electromotive force guarded scanner for resistance measurements

    Science.gov (United States)

    Jarrett, Dean G.; Marshall, James A.; Marshall, Thomas A.; Dziuba, Ronald F.

    1999-06-01

    The design and testing of a low thermal electromotive force guarded scanner, developed to provide completely guarded switching when used with actively guarded resistance bridge networks, is described. The design provides a continuous guard circuit trace on the scanner circuit boards that surrounds the relay contacts and protects the measurement circuit from leakages to ground. Modification to the circuit boards and relays of the guarded scanner are explained. Several tests were developed to evaluate the guarding effectiveness, including isolating sections of the guard circuit to create a potential drop between the main and guard circuits. Calibration of standard resistors using the guarded scanner has shown relative differences less than 1×10-6, 30×10-6, and 150×10-6 for measurements made with and without the guarded scanner at nominal resistances of 1, 10, and 100 GΩ, respectively. The substitution method was used to significantly reduce the relative differences between channels to less than 0.5×10-6, 3×10-6, and 30×10-6 for nominal resistances of 1, 10, and 100 GΩ, respectively. Applications for the guarded scanner in automated direct current measurement systems are presented.

  5. Fricção em braquetes gerada por fios de aço inoxidável, superelásticos com IonGuard e sem IonGuard Friction force on brackets generated by stainless steel wire and superelastic wires with and without IonGuard

    Directory of Open Access Journals (Sweden)

    Luiz Carlos Campos Braga

    2011-08-01

    Full Text Available OBJETIVO: o objetivo deste estudo foi verificar a fricção no braquete (Roth, Composite, 10.17.005, 3,2mm, largura 0,022" x 0,030", Torque -2° e angulação +13°, Morelli®, Brasil, utilizando fios ortodônticos retangulares de 0,019" x 0,025" de aço inoxidável (Morelli®, Brasil e de níquel-titânio superelásticos Bioforce com IonGuard e sem IonGuard (Bioforce, GAC®, EUA. MÉTODOS: foram utilizados 24 conjuntos braquetes/segmento de fio, divididos em 3 grupos de acordo com o fio. Cada conjunto braquete/segmento de fio foi testado 3 vezes e obtida uma média. Os ensaios foram realizados em máquina universal de ensaios EMIC DL2000®. Os dados foram submetidos à Análise de Variância com significância de 95%. RESULTADOS: o fio retangular Bioforce com IonGuard apresentou fricção significativamente menor que o Bioforce sem IonGuard, porém sem diferença do fio de aço inoxidável. Entretanto, o coeficiente de variação dos fios Bioforce com e sem IonGuard foi menor que o do fio de aço inoxidável. CONCLUSÃO: os fios retangulares de 0,019" x 0,025" Bioforce com IonGuard apresentam menor fricção que o fio Bioforce sem IonGuard, sem diferença para o fio de aço inoxidável.OBJECTIVE: The aim of this study was to evaluate the friction forces on brackets (Roth, Composite, 10.17.005, 3.2 mm, width 0.022" x 0.030 ", Torque -2° and angulation +13°, Morelli®, Brazil, with stainless steel orthodontic rectangular wire (Morelli®, Brazil and nickel titanium superelastic Bioforce wires with and without IonGuard (Bioforce, GAC®, USA. MATERIAL AND METHODS: Twenty-four brackets/wire segment combinations were used, distributed into three groups according to the orthodontic wire. Each bracket/wire segment combination was tested three times. The tests were performed in a universal testing machine Emic DL2000®. The data was submitted to ANOVA one way followed by Tukey's post hoc test (p<0.05. RESULTS: The rectangular orthodontic Bioforce wire

  6. 78 FR 48696 - Draft Revisions to the Marine Safety Manual, Volume III, Chapters 20-26

    Science.gov (United States)

    2013-08-09

    ... Commercial Vessel Compliance, U.S. Coast Guard; telephone 202-372-1208, email [email protected] . If...) clarifying roles, responsibilities, and facilitation of communications with the appropriate offices at Coast.... Jonathan C. Burton, Captain, U.S. Coast Guard, Director, Inspections and Compliance. [FR Doc. 2013-19359...

  7. Integrated Unit Deployments: Rethinking Air National Guard Fighter Mobilizations

    Science.gov (United States)

    2016-06-01

    participation in the homeland defense mission. But they emphasized that homeland defense would not become an exclusive ANG mission. Operation...station that can absorb pilots and maintainers left behind. Few Air National Guard squadrons enjoy this luxury . Only Air Guard squadrons that are part

  8. On the bi-dimensional variational decomposition applied to nonstationary vibration signals for rolling bearing crack detection in coal cutters

    International Nuclear Information System (INIS)

    Jiang, Yu; Li, Zhixiong; Zhang, Chao; Peng, Z; Hu, Chao

    2016-01-01

    This work aims to detect rolling bearing cracks using a variational approach. An original method that appropriately incorporates bi-dimensional variational mode decomposition (BVMD) into discriminant diffusion maps (DDM) is proposed to analyze the nonstationary vibration signals recorded from the cracked rolling bearings in coal cutters. The advantage of this variational decomposition based diffusion map (VDDM) method in comparison to the current DDM is that the intrinsic vibration mode of the crack can be filtered into a limited bandwidth in the frequency domain with an estimated central frequency, thus discarding the interference signal components in the vibration signals and significantly improving the crack detection performance. In addition, the VDDM is able to simultaneously process two-channel sensor signals to reduce information leakage. Experimental validation using rolling bearing crack vibration signals demonstrates that the VDDM separated the raw signals into four intrinsic modes, including one roller vibration mode, one roller cage vibration mode, one inner race vibration mode, and one outer race vibration mode. Hence, reliable fault features were extracted from the outer race vibration mode, and satisfactory crack identification performance was achieved. The comparison between the proposed VDDM and existing approaches indicated that the VDDM method was more efficient and reliable for crack detection in coal cutter rolling bearings. As an effective catalyst for rolling bearing crack detection, this newly proposed method is useful for practical applications. (paper)

  9. DW_CGBI

    Data.gov (United States)

    Department of Homeland Security — Subset of Coast Guard Business Intelligence (CGBI) data used for reporting usage and utilization metrics within the Coast Guard Business Intelligence (CGBI) system.

  10. The Genome Sequence of the Leaf-Cutter Ant Atta cephalotes Reveals Insights into Its Obligate Symbiotic Lifestyle

    Science.gov (United States)

    Suen, Garret; Holt, Carson; Abouheif, Ehab; Bornberg-Bauer, Erich; Bouffard, Pascal; Caldera, Eric J.; Cash, Elizabeth; Cavanaugh, Amy; Denas, Olgert; Elhaik, Eran; Favé, Marie-Julie; Gadau, Jürgen; Gibson, Joshua D.; Graur, Dan; Grubbs, Kirk J.; Hagen, Darren E.; Harkins, Timothy T.; Helmkampf, Martin; Hu, Hao; Johnson, Brian R.; Kim, Jay; Marsh, Sarah E.; Moeller, Joseph A.; Muñoz-Torres, Mónica C.; Murphy, Marguerite C.; Naughton, Meredith C.; Nigam, Surabhi; Overson, Rick; Rajakumar, Rajendhran; Reese, Justin T.; Scott, Jarrod J.; Smith, Chris R.; Tao, Shu; Tsutsui, Neil D.; Viljakainen, Lumi; Wissler, Lothar; Yandell, Mark D.; Zimmer, Fabian; Taylor, James; Slater, Steven C.; Clifton, Sandra W.; Warren, Wesley C.; Elsik, Christine G.; Smith, Christopher D.; Weinstock, George M.; Gerardo, Nicole M.; Currie, Cameron R.

    2011-01-01

    Leaf-cutter ants are one of the most important herbivorous insects in the Neotropics, harvesting vast quantities of fresh leaf material. The ants use leaves to cultivate a fungus that serves as the colony's primary food source. This obligate ant-fungus mutualism is one of the few occurrences of farming by non-humans and likely facilitated the formation of their massive colonies. Mature leaf-cutter ant colonies contain millions of workers ranging in size from small garden tenders to large soldiers, resulting in one of the most complex polymorphic caste systems within ants. To begin uncovering the genomic underpinnings of this system, we sequenced the genome of Atta cephalotes using 454 pyrosequencing. One prediction from this ant's lifestyle is that it has undergone genetic modifications that reflect its obligate dependence on the fungus for nutrients. Analysis of this genome sequence is consistent with this hypothesis, as we find evidence for reductions in genes related to nutrient acquisition. These include extensive reductions in serine proteases (which are likely unnecessary because proteolysis is not a primary mechanism used to process nutrients obtained from the fungus), a loss of genes involved in arginine biosynthesis (suggesting that this amino acid is obtained from the fungus), and the absence of a hexamerin (which sequesters amino acids during larval development in other insects). Following recent reports of genome sequences from other insects that engage in symbioses with beneficial microbes, the A. cephalotes genome provides new insights into the symbiotic lifestyle of this ant and advances our understanding of host–microbe symbioses. PMID:21347285

  11. The genome sequence of the leaf-cutter ant Atta cephalotes reveals insights into its obligate symbiotic lifestyle.

    Directory of Open Access Journals (Sweden)

    Garret Suen

    2011-02-01

    Full Text Available Leaf-cutter ants are one of the most important herbivorous insects in the Neotropics, harvesting vast quantities of fresh leaf material. The ants use leaves to cultivate a fungus that serves as the colony's primary food source. This obligate ant-fungus mutualism is one of the few occurrences of farming by non-humans and likely facilitated the formation of their massive colonies. Mature leaf-cutter ant colonies contain millions of workers ranging in size from small garden tenders to large soldiers, resulting in one of the most complex polymorphic caste systems within ants. To begin uncovering the genomic underpinnings of this system, we sequenced the genome of Atta cephalotes using 454 pyrosequencing. One prediction from this ant's lifestyle is that it has undergone genetic modifications that reflect its obligate dependence on the fungus for nutrients. Analysis of this genome sequence is consistent with this hypothesis, as we find evidence for reductions in genes related to nutrient acquisition. These include extensive reductions in serine proteases (which are likely unnecessary because proteolysis is not a primary mechanism used to process nutrients obtained from the fungus, a loss of genes involved in arginine biosynthesis (suggesting that this amino acid is obtained from the fungus, and the absence of a hexamerin (which sequesters amino acids during larval development in other insects. Following recent reports of genome sequences from other insects that engage in symbioses with beneficial microbes, the A. cephalotes genome provides new insights into the symbiotic lifestyle of this ant and advances our understanding of host-microbe symbioses.

  12. Volunteers in the Danish Home Guard 2011

    DEFF Research Database (Denmark)

    Fridberg, Torben; Damgaard, Malene

    voluntary work than the population as a whole. The report also shows that one in three active members of the Home Guard would like to be deployed on international operations to support the armed forces. The young members are especially willing – and these members have increased in recent years. This report......This report describes the composition of the Home Guard’s volunteer members and their attitudes to and expectations for the Home Guard. A similar survey was carried out in 2007, and the present report therefore also examines the trends from 2007 to 2011. Among other things, the report shows...... that the voluntary members are a stable resource, as on average they have been members of the Home Guard for more than 24 years. There is a clear majority of men aged 25-50. Relatively many have vocational training, and many are employed in the private sector. Members are also relatively more active in other...

  13. Use of Head Guards in AIBA Boxing Tournaments-A Cross-Sectional Observational Study.

    Science.gov (United States)

    Loosemore, Michael P; Butler, Charles F; Khadri, Abdelhamid; McDonagh, David; Patel, Vimal A; Bailes, Julian E

    2017-01-01

    This study looks at the changes in injuries after the implementation of a new rule by the International Boxing Association (AIBA) to remove head guards from its competitions. A cross-sectional observational study performed prospectively. This brief report examines the removal of head guards in 2 different ways. The first was to examine the stoppages due to blows to the head by comparing World Series Boxing (WSB), without head guards, to other AIBA competitions with head guards. Secondly, we examined the last 3 world championships: 2009 and 2011 (with head guards) and 2013 (without head guards). World Series Boxing and AIBA world championship boxing. Boxers from WSB and AIBA world championships. The information was recorded by ringside medical physicians. Stoppages per 10 000 rounds; stoppages per 1000 hours. Both studies show that the number of stoppages due to head blows was significantly decreased without head guards. The studies also showed that there was a notable increase in cuts. Removing head guards may reduce the already small risk of acute brain injury in amateur boxing.

  14. The effect of the guard location in a nuclear facility on performance criteria

    International Nuclear Information System (INIS)

    Lee, Hyun-Chul; Hwang, In-Koo; An, Jin-Soo

    2002-01-01

    Full text: The major functions of a physical protection system (PPS) are detection, delay, and response. Detection function is mainly to sense an adversary's intrusion and assess alarm events, and its physical implementation includes intrusion sensors, alarm communication systems and entry control facilities. Delay function can be accomplished through various passive and active barriers, makes adversary's advance toward his goal slow. Response function is to practically stop adversary actions. There are response guards responsible for the response function in a nuclear facility. They can be located at one or more posts to take action against adversary's progress after alarm occurred. The mostly used quantitative effectiveness measure of a PPS is the probability of interruption (PI) derived from delay time after detection and guard response time. Delay time is a variable dependent on adversary's capabilities and guard response time varies with the distance between a guard post and destination to be dispatched. According to the advanced technology of digital computing, software programs such as SAVI (System Analysis of Vulnerability to Intrusion) provide PI based on user input including adversary capability, protective elements, guard response time, and other PPS information. However guard response time is considered as a constant not a variable. That means same guard response time is always set regardless of the variable guard travel time from a post to a location where guards can interrupt the adversary's action. Since the location of guards may be easily changed in contrast to detection elements or delay elements and can be considered as a flexible mean against temporarily upgraded threat, a trial to investigate the changes of PI and CDP (Critical Detection Point) in case that guard response time is a variable was started. We defined several detection and delay elements along an adversary intrusion path and guard travel times as many as the number of detection

  15. The Impact of Excluding Food Guarding from a Standardized Behavioral Canine Assessment in Animal Shelters

    Science.gov (United States)

    Mohan-Gibbons, Heather; Dolan, Emily D.; Reid, Pamela; Slater, Margaret R.; Mulligan, Hugh; Weiss, Emily

    2018-01-01

    Simple Summary Recent research has called into question the value of the food guarding assessment as a predictive tool for determining the safety of shelter dogs. This study examined the effect of eliminating the food guarding assessment in nine U.S. animal shelters. It was found that when the food guarding assessment was removed, bites or other injuries to staff or adopters did not increase. However, dogs exhibiting food guarding behavior were less likely to be adopted, had a longer shelter stay, and were more likely to be euthanized than dogs in the general population. Based on previous research and this study’s findings, the authors recommend that shelters discontinue the food guarding assessment. Abstract Many shelters euthanize or restrict adoptions for dogs that exhibit food guarding while in the animal shelter. However, previous research showed that only half the dogs exhibiting food guarding during an assessment food guard in the home. So, dogs are often misidentified as future food guarders during shelter assessments. We examined the impact of shelters omitting food guarding assessments. Nine shelters conducted a two-month baseline period of assessing for food guarding followed by a two-month investigative period during which they omitted the food guarding assessment. Dogs that guarded their food during a standardized assessment were less likely to be adopted, had a longer shelter stay, and were more likely to be euthanized. When the shelters stopped assessing for food guarding, there was no significant difference in the rate of returns of food guarding dogs, even though more dogs were adopted because fewer were identified with food guarding behavior. Additionally, the number of injuries to staff, volunteers, and adopters was low (104 incidents from a total of 14,180 dogs) and did not change when the food guarding assessment was omitted. These results support a recommendation that shelters discontinue the food guarding assessment. PMID:29419746

  16. 78 FR 29022 - Safety Zone; Fourth of July Fireworks, Berkeley Marina, Berkeley, CA

    Science.gov (United States)

    2013-05-17

    ... Guard will enforce a 1,000 foot safety zone around the Berkeley Pier in approximate position 37[deg]51... Zone; Fourth of July Fireworks, Berkeley Marina, Berkeley, CA AGENCY: Coast Guard, DHS. ACTION: Notice of enforcement of regulation. SUMMARY: The Coast Guard will enforce the safety zone for the Berkeley...

  17. 76 FR 77243 - Information Collection Request to Office of Management and Budget; OMB Control Number: 1625-0010

    Science.gov (United States)

    2011-12-12

    ... Office of Management and Budget; OMB Control Number: 1625-0010 AGENCY: Coast Guard, DHS. ACTION: Sixty....S. Coast Guard intends to submit an Information Collection Request (ICR) to the Office of Management... Guard docket number [USCG-2011-1074] to the Docket Management Facility (DMF) at the U.S. Department of...

  18. The Impact of Excluding Food Guarding from a Standardized Behavioral Canine Assessment in Animal Shelters

    Directory of Open Access Journals (Sweden)

    Heather Mohan-Gibbons

    2018-02-01

    Full Text Available Many shelters euthanize or restrict adoptions for dogs that exhibit food guarding while in the animal shelter. However, previous research showed that only half the dogs exhibiting food guarding during an assessment food guard in the home. So, dogs are often misidentified as future food guarders during shelter assessments. We examined the impact of shelters omitting food guarding assessments. Nine shelters conducted a two-month baseline period of assessing for food guarding followed by a two-month investigative period during which they omitted the food guarding assessment. Dogs that guarded their food during a standardized assessment were less likely to be adopted, had a longer shelter stay, and were more likely to be euthanized. When the shelters stopped assessing for food guarding, there was no significant difference in the rate of returns of food guarding dogs, even though more dogs were adopted because fewer were identified with food guarding behavior. Additionally, the number of injuries to staff, volunteers, and adopters was low (104 incidents from a total of 14,180 dogs and did not change when the food guarding assessment was omitted. These results support a recommendation that shelters discontinue the food guarding assessment.

  19. TBM performance prediction in Yucca Mountain welded tuff from linear cutter tests

    International Nuclear Information System (INIS)

    Gertsch, R.; Ozdemir, L.; Gertsch, L.

    1992-01-01

    This paper discusses performance prediction which were developed for tunnel boring machines operating in welded tuff for the construction of the experimental study facility and the potential nuclear waste repository at Yucca Mountain. The predictions were based on test data obtained from an extensive series of linear cutting tests performed on samples of Topopah String welded tuff from the Yucca Mountain Project site. Using the cutter force, spacing, and penetration data from the experimental program, the thrust, torque, power, and rate of penetration were estimated for a 25 ft diameter tunnel boring machine (TBM) operating in welded tuff. The result show that the Topopah Spring welded tuff (TSw2) can be excavated at relatively high rates of advance with state-of-the-art TBMs. The result also show, however, that the TBM torque and power requirements will be higher than estimated based on rock physical properties and past tunneling experience in rock formations of similar strength

  20. 30 CFR 56.7013 - Covering or guarding drill holes.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Covering or guarding drill holes. 56.7013 Section 56.7013 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Rotary Jet Piercing Drilling § 56.7013 Covering or guarding drill holes. Drill holes large enough to...

  1. 30 CFR 57.7013 - Covering or guarding drill holes.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Covering or guarding drill holes. 57.7013 Section 57.7013 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... and Rotary Jet Piercing Drilling-Surface Only § 57.7013 Covering or guarding drill holes. Drill holes...

  2. Isolation of a strong Arabidopsis guard cell promoter and its potential as a research tool

    Science.gov (United States)

    Yang, Yingzhen; Costa, Alex; Leonhardt, Nathalie; Siegel, Robert S; Schroeder, Julian I

    2008-01-01

    Background A common limitation in guard cell signaling research is that it is difficult to obtain consistent high expression of transgenes of interest in Arabidopsis guard cells using known guard cell promoters or the constitutive 35S cauliflower mosaic virus promoter. An additional drawback of the 35S promoter is that ectopically expressing a gene throughout the organism could cause pleiotropic effects. To improve available methods for targeted gene expression in guard cells, we isolated strong guard cell promoter candidates based on new guard cell-specific microarray analyses of 23,000 genes that are made available together with this report. Results A promoter, pGC1(At1g22690), drove strong and relatively specific reporter gene expression in guard cells including GUS (beta-glucuronidase) and yellow cameleon YC3.60 (GFP-based calcium FRET reporter). Reporter gene expression was weaker in immature guard cells. The expression of YC3.60 was sufficiently strong to image intracellular Ca2+ dynamics in guard cells of intact plants and resolved spontaneous calcium transients in guard cells. The GC1 promoter also mediated strong reporter expression in clustered stomata in the stomatal development mutant too-many-mouths (tmm). Furthermore, the same promoter::reporter constructs also drove guard cell specific reporter expression in tobacco, illustrating the potential of this promoter as a method for high level expression in guard cells. A serial deletion of the promoter defined a guard cell expression promoter region. In addition, anti-sense repression using pGC1 was powerful for reducing specific GFP gene expression in guard cells while expression in leaf epidermal cells was not repressed, demonstrating strong cell-type preferential gene repression. Conclusion The pGC1 promoter described here drives strong reporter expression in guard cells of Arabidopsis and tobacco plants. It provides a potent research tool for targeted guard cell expression or gene silencing. It is also

  3. A new sampling technique for surface exposure dating using a portable electric rock cutter

    Directory of Open Access Journals (Sweden)

    Yusuke Suganuma

    2012-07-01

    Full Text Available Surface exposure dating using in situ cosmogenic nuclides has contributed to our understanding of Earth-surface processes. The precision of the ages estimated by this method is affected by the sample geometry; therefore, high accuracy measurements of the thickness and shape of the rock sample (thickness and shape is crucial. However, it is sometimes diffi cult to meet these requirements by conventional sampling methods with a hammer and chisel. Here, we propose a new sampling technique using a portable electric rock cutter. This sampling technique is faster, produces more precisely shaped samples, and allows for a more precise age interpretation. A simple theoretical modeldemonstrates that the age error due to defective sample geometry increases as the total sample thickness increases, indicating the importance of precise sampling for surface exposure dating.

  4. Line Heat-Source Guarded Hot Plate

    Data.gov (United States)

    Federal Laboratory Consortium — Description:The 1-meter guarded hot-plate apparatus measures thermal conductivity of building insulation. This facility provides for absolute measurement of thermal...

  5. 77 FR 18688 - Safety Zone; Chicago Harbor, Navy Pier Southeast, Chicago, IL

    Science.gov (United States)

    2012-03-28

    ... email MST2 Rebecca Stone, Prevention Department, Coast Guard Sector Lake Michigan, Milwaukee, WI at 414-747-7154, email Rebecca.R.Stone@uscg.mil . SUPPLEMENTARY INFORMATION: The Coast Guard will enforce the...

  6. 77 FR 25361 - Safety Zone; Chicago Harbor, Navy Pier Southeast, Chicago, IL

    Science.gov (United States)

    2012-04-30

    ... email MST2 Rebecca Stone, Prevention Department, Coast Guard Sector Lake Michigan, Milwaukee, WI at 414-747-7154, email Rebecca.R.Stone@uscg.mil . SUPPLEMENTARY INFORMATION: The Coast Guard will enforce the...

  7. 76 FR 3647 - Towing Safety Advisory Committee; Vacancies

    Science.gov (United States)

    2011-01-20

    ... policy of the Coast Guard on gender and ethnic diversity, we encourage qualified women and members of minority groups to apply. The Coast Guard values diversity as an enhancement to all the different...

  8. Efficient parallel implementations of approximation algorithms for guarding 1.5D terrains

    Directory of Open Access Journals (Sweden)

    Goran Martinović

    2015-03-01

    Full Text Available In the 1.5D terrain guarding problem, an x-monotone polygonal line is dened by k vertices and a G set of terrain points, i.e. guards, and a N set of terrain points which guards are to observe (guard. This involves a weighted version of the guarding problem where guards G have weights. The goal is to determine a minimum weight subset of G to cover all the points in N, including a version where points from N have demands. Furthermore, another goal is to determine the smallest subset of G, such that every point in N is observed by the required number of guards. Both problems are NP-hard and have a factor 5 approximation [3, 4]. This paper will show that if the (1+ϵ-approximate solver for the corresponding linear program is a computer, for any ϵ > 0, an extra 1+ϵ factor will appear in the final approximation factor for both problems. A comparison will be carried out the parallel implementation based on GPU and CPU threads with the Gurobi solver, leading to the conclusion that the respective algorithm outperforms the Gurobi solver on large and dense inputs typically by one order of magnitude.

  9. Guard cell zeaxanthin tracks photosynthetically active radiation and stomatal apertures in Vicia faba leaves

    International Nuclear Information System (INIS)

    Srivastava, A.; Zeiger, E.

    1995-01-01

    Zeaxanthin, antheraxanthin and violaxanthin concentrations in guard cells from sonicated abaxial epidermal peels of Vicia faba were measured from dawn to dusk, and compared with concentrations in mesophyll tissue of the same leaves. Measured changes in guard cell zeaxanthin and violaxanthin concentrations indicate that guard cells operate the xanthophyll cycle throughout the day. Mesophyll tissue had no detectable zeaxanthin at dawn, whereas guard cells had 30–50 mmol mol −1 chlorophyll a+b. On a chlorophyll basis, maximal zeaxanthin levels were 3–4 fold higher in guard cells than in mesophyll cells. Zeaxanthin concentrations tracked levels of photosynthetically active radiation (PAR) in both mesophyll and guard cells. In the mesophyll, most of the zeaxanthin changes occurred in mid-morning and mid-afternoon. In guard cells, zeaxanthin concentrations changed nearly linearly with PAR in the early morning and late afternoon, and closely tracked PAR levels throughout the day. Guard cell zeaxanthin concentrations were also closely correlated with stomatal apertures. The close relationship between zeaxanthin concentrations and PAR levels in guard cells indicates that zeaxanthin is well suited to function as a molecular photosensor in stomatal movements. (author)

  10. Isolation of a strong Arabidopsis guard cell promoter and its potential as a research tool

    Directory of Open Access Journals (Sweden)

    Siegel Robert S

    2008-02-01

    Full Text Available Abstract Background A common limitation in guard cell signaling research is that it is difficult to obtain consistent high expression of transgenes of interest in Arabidopsis guard cells using known guard cell promoters or the constitutive 35S cauliflower mosaic virus promoter. An additional drawback of the 35S promoter is that ectopically expressing a gene throughout the organism could cause pleiotropic effects. To improve available methods for targeted gene expression in guard cells, we isolated strong guard cell promoter candidates based on new guard cell-specific microarray analyses of 23,000 genes that are made available together with this report. Results A promoter, pGC1(At1g22690, drove strong and relatively specific reporter gene expression in guard cells including GUS (beta-glucuronidase and yellow cameleon YC3.60 (GFP-based calcium FRET reporter. Reporter gene expression was weaker in immature guard cells. The expression of YC3.60 was sufficiently strong to image intracellular Ca2+ dynamics in guard cells of intact plants and resolved spontaneous calcium transients in guard cells. The GC1 promoter also mediated strong reporter expression in clustered stomata in the stomatal development mutant too-many-mouths (tmm. Furthermore, the same promoter::reporter constructs also drove guard cell specific reporter expression in tobacco, illustrating the potential of this promoter as a method for high level expression in guard cells. A serial deletion of the promoter defined a guard cell expression promoter region. In addition, anti-sense repression using pGC1 was powerful for reducing specific GFP gene expression in guard cells while expression in leaf epidermal cells was not repressed, demonstrating strong cell-type preferential gene repression. Conclusion The pGC1 promoter described here drives strong reporter expression in guard cells of Arabidopsis and tobacco plants. It provides a potent research tool for targeted guard cell expression or

  11. Surfing for mouth guards: assessing quality of online information.

    Science.gov (United States)

    Magunacelaya, Macarena B; Glendor, Ulf

    2011-10-01

    The Internet is an easily accessible and commonly used source of health-related information, but evaluations of the quality of this information within the dental trauma field are still lacking. The aims of this study are (i) to present the most current scientific knowledge regarding mouth guards used in sport activities, (ii) to suggest a scoring system to evaluate the quality of information pertaining to mouth guard protection related to World Wide Web sites and (iii) to employ this scoring system when seeking reliable mouth guard-related websites. First, an Internet search using the keywords 'athletic injuries/prevention and control' and 'mouth protector' or 'mouth guards' in English was performed on PubMed, Cochrane, SvedMed+ and Web of Science to identify scientific knowledge about mouth guards. Second, an Internet search using the keywords 'consumer health information Internet', 'Internet information public health' and 'web usage-seeking behaviour' was performed on PubMed and Web of Science to obtain scientific articles seeking to evaluate the quality of health information on the Web. Based on the articles found in the second search, two scoring systems were selected. Then, an Internet search using the keywords 'mouth protector', 'mouth guards' and 'gum shields' in English was performed on the search engines Google, MSN and Yahoo. The websites selected were evaluated for reliability and accuracy. Of the 223 websites retrieved, 39 were designated valid and evaluated. Nine sites scored 22 or higher. The mean total score of the 39 websites was 14.2. Fourteen websites scored higher than the mean total score, and 25 websites scored less. The highest total score, presented by a Public Institution Web site (Health Canada), was 31 from a maximum possible score of 34, and the lowest score was 0. This study shows that there is a high amount of information about mouth guards on the Internet but that the quality of this information varies. It should be the responsibility

  12. Habitat Modification by the Leaf-Cutter Ant, Atta cephalotes, and Patterns of Leaf-Litter Arthropod Communities.

    Science.gov (United States)

    Wells, Rachel L; Murphy, Serena K; Moran, Matthew D

    2017-12-08

    Ecosystem engineers are profoundly important in many biological communities. A Neotropical taxonomic group considered to have engineering effects is the Formicidae (ants). Leaf-cutter ants (LCAs), in particular, which form extensive colonies of millions of individuals, can be important ecosystem engineers in these environments. While the effects of LCAs on plant community structure and soil chemistry are well-studied, their effects on consumers are poorly understood. Therefore, we examined the indirect effects of the LCA Atta cephalotes L. on the leaf-litter arthropod community. We compared abundance and diversity patterns at ant nests to areas distant from nests, utilizing both a factorial design and gradient analysis for both nocturnal and diurnal arthropods. We found that arthropod abundance and diversity was significantly lower for multiple taxonomic groups and trophic levels near leaf-cutter nests, and this pattern was strongest at night. Exceptions to this pattern included two morphospecies of Collembola that were more abundant on nests, suggesting some specialization for these species. For the gradient analysis, abundance increased exponentially for most groups of arthropods. However, for the dominant arthropod species, the amphipod Cerrorchestia hyloraina Lindeman, a quadratic function was the best fit curvilinear model for abundance. It appeared that C. hyloraina had maximal abundance at the transition between nest site and less disturbed forest. These results indicate that LCA activity has a strong effect on the leaf-litter arthropod community, adding to spatial heterogeneity within neotropical forests. These effects may translate into changes in important ecological processes such as nutrient cycling and food web function. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  13. Innovative technology summary report: High-speed clamshell pipe cutter

    International Nuclear Information System (INIS)

    1998-09-01

    The Hanford Site C Reactor Technology Demonstration Group demonstrated the High-Speed Clamshell Pipe Cutter technology, developed and marketed by Tri Tool Inc. (Rancho Cordova, California). The models demonstrated are portable, split-frame pipe lathes that require minimal radial and axial clearances for severing and/or beveling in-line pipe with ranges of 25 cm to 41 cm and 46 cm to 61 cm nominal diameter. The radial clearance requirement from the walls, floors, or adjacent pipes is 18 cm. The lathes were supplied with carbide insert conversion kits for the cutting bits for the high-speed technique that was demonstrated. Given site-specific factors, this demonstration showed the cost of the improved technology to be approximately 30% higher than the traditional (baseline) technology (oxyacetylene torch) cost of $14,400 for 10 cuts of contaminated 41-cm and 61-cm-diameter pipe at C Reactor. Actual cutting times were faster than the baseline technology; however, moving/staging the equipment took longer. Unlike the baseline torch, clamshell lathes do not involve applied heat, flames, or smoke and can be operated remotely, thereby helping personal exposures to be as low as reasonably achievable. The baseline technology was demonstrated at the C Reactor north and south water pipe tunnels August 19--22, 1997. The improved technology was demonstrated in the gas pipe tunnel December 15--19

  14. 78 FR 22275 - Collection of Information under Review by Office of Management and Budget

    Science.gov (United States)

    2013-04-15

    ...., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand Delivery: To DMF address above... received in a timely manner, mark the fax, attention Desk Officer for the Coast Guard. [[Page 22276

  15. 75 FR 50773 - Invocation of Sunken Military Craft Act

    Science.gov (United States)

    2010-08-17

    ... Military Craft Act AGENCY: Coast Guard, DHS. ACTION: Notice. SUMMARY: The Coast Guard is announcing that a C-130 aircraft which crashed off the coast of California is a sunken military craft. It is therefore... is announcing that the wreckage of CG 1705 is a sunken military craft, and is therefore protected...

  16. 76 FR 28799 - Commercial Fishing Safety Advisory Committee; Vacancies

    Science.gov (United States)

    2011-05-18

    ..., Section 1603. In support of the Coast Guard policy on gender and ethnic non- discrimination, we encourage qualified men and women and members of all racial and ethnic groups to apply. The Coast Guard values...

  17. 78 FR 63233 - National Offshore Safety Advisory Committee; Meeting

    Science.gov (United States)

    2013-10-23

    ....S. Coast Guard, 2703 Martin Luther King Jr. Ave. SE., Stop 7509, Washington, DC 20593-7509... (ADFO) of NOSAC, Commandant (CG-OES-2), U.S. Coast Guard, 2703 Martin Luther King Jr. Ave. SE., Stop...

  18. 30 CFR 57.12023 - Guarding electrical connections and resistor grids.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Guarding electrical connections and resistor... NONMETAL MINES Electricity Surface and Underground § 57.12023 Guarding electrical connections and resistor grids. Electrical connections and resistor grids that are difficult or impractical to insulate shall be...

  19. Nitric oxide in guard cells as an important secondary messenger during stomatal closure

    Directory of Open Access Journals (Sweden)

    Gunja eGayatri

    2013-10-01

    Full Text Available he modulation of guard cell function is the basis of stomatal closure, essential for optimizing water use and CO2 uptake by leaves. Nitric oxide (NO in guard cells plays a very important role as a secondary messenger during stomatal closure induced by effectors, including hormones. For example, exposure to abscisic acid (ABA triggers a marked increase in NO of guard cells, well before stomatal closure. In guard cells of multiple species, like Arabidopsis, Vicia and pea, exposure to ABA or methyl jasmonate or even microbial elicitors (e.g. chitosan induces production of NO as well as reactive oxygen species (ROS. The role of NO in stomatal closure has been confirmed by using NO donors (e.g. SNP and NO scavengers (like cPTIO and inhibitors of NOS (L-NAME or NR (tungstate. Two enzymes: a L-NAME-sensitive, nitric oxide synthase (NOS-like enzyme and a tungstate-sensitive nitrate reductase (NR, can mediate ABA-induced NO rise in guard cells. However, the existence of true NOS in plant tissues and its role in guard cell NO-production are still a matter of intense debate. Guard cell signal transduction leading to stomatal closure involves the participation of several components, besides NO, such as cytosolic pH, ROS, free Ca2+ and phospholipids. Use of fluorescent dyes has revealed that the rise in NO of guard cells occurs after the increase in cytoplasmic pH and ROS. The rise in NO causes an elevation in cytosolic free Ca2+ and promotes the efflux of cations as well as anions from guard cells. Stomatal guard cells have become a model system to study the signalling cascade mechanisms in plants, particularly with NO as a dominant component. The interrelationships and interactions of NO with cytosolic pH, ROS, and free Ca2+ are quite complex and need further detailed examination. While assessing critically the available literature, the present review projects possible areas of further work related to NO-action in stomatal guard cells.

  20. Application of Quality Management Tools for Evaluating the Failure Frequency of Cutter-Loader and Plough Mining Systems

    Science.gov (United States)

    Biały, Witold

    2017-06-01

    Failure frequency in the mining process, with a focus on the mining machine, has been presented and illustrated by the example of two coal-mines. Two mining systems have been subjected to analysis: a cutter-loader and a plough system. In order to reduce costs generated by failures, maintenance teams should regularly make sure that the machines are used and operated in a rational and effective way. Such activities will allow downtimes to be reduced, and, in consequence, will increase the effectiveness of a mining plant. The evaluation of mining machines' failure frequency contained in this study has been based on one of the traditional quality management tools - the Pareto chart.

  1. Command, Control, Communication, Computers and Information Technology (C4&IT). Strategic Plan, FY2008 - 2012

    National Research Council Canada - National Science Library

    2008-01-01

    ...&IT)/CG-6, Chief Information Officer (CIO), for the Coast Guard publishes this C4&IT Strategic Plan. The purpose of this plan is to provide a unifying strategy to better integrate and synchronize Coast Guard C4...

  2. Triangulating and guarding realistic polygons

    NARCIS (Netherlands)

    Aloupis, G.; Bose, P.; Dujmovic, V.; Gray, C.M.; Langerman, S.; Speckmann, B.

    2014-01-01

    We propose a new model of realistic input: k-guardable objects. An object is k-guardable if its boundary can be seen by k guards. We show that k-guardable polygons generalize two previously identified classes of realistic input. Following this, we give two simple algorithms for triangulating

  3. 29 CFR 1915.73 - Guarding of deck openings and edges.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Guarding of deck openings and edges. 1915.73 Section 1915.73 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION..., Ladders and Other Working Surfaces § 1915.73 Guarding of deck openings and edges. (a) The provisions of...

  4. TRM performance prediction in Yucca Mountain welded tuff from linear cutter tests

    International Nuclear Information System (INIS)

    Gertsch, R.; Ozdemir, L.; Gertsch, L.

    1992-01-01

    Performance predictions were developed for tunnel boring machines operating in welded tuff for the construction of the experimental study facility and the potential nuclear waste repository at Yucca Mountain. The predictions were based on test data obtained from an extensive series of linear cutting tests performed on samples of Topopah Spring welded tuff from the Yucca Mountain Project site. Using the cutter force, spacing, and penetration data from the experimental program, the thrust, torque, power, and rate of penetration were estimated for a 25 ft diameter tunnel boring machine (TBM) operating in welded tuff. Guidelines were developed for the optimal design of the TBM cutterhead to achieve high production rates at the lowest possible excavation costs. The results show that the Topopah Spring welded tuff (TSw2) can be excavated at relatively high rates of advance with state-of-the-art TBMs. The results also show, however, that the TBM torque and power requirements will be higher than estimated based on rock physical properties and past tunneling experience in rock formations of similar strength

  5. Use of CYPRES™ cutters with a Kevlar clamp band for hold-down and release of the Icarus De-Orbit Sail payload on TechDemoSat-1

    Science.gov (United States)

    Kingston, J.; Hobbs, S.; Roberts, P.; Juanes-Vallejo, C.; Robinson, F.; Sewell, R.; Snapir, B.; Llop, J. Virgili; Patel, M.

    2014-07-01

    TechDemoSat-1 is a UK-funded technology demonstration satellite, carrying 8 payloads provided by UK organisations, which is due to be launched in the first quarter of 2014. Cranfield University has supplied a De-Orbit Sail (DOS) payload to allow the mission to comply with end-of-life debris mitigation guidelines. The payload provides a passive, simple, and low-cost means of mitigating debris proliferation in Low Earth Orbit, by enhancing spacecraft aerodynamic drag at end-of-life and reducing time to natural orbital decay and re-entry. This paper describes the use of small commercial electro-explosive devices (EEDs), produced for use as parachute tether-cutters in reserve chute deployment systems, as low-cost but high-reliability release mechanisms for space applications. A testing campaign, including thermal vacuum and mechanical vibration, is described, which demonstrates the suitability of these CYPRES™ cutters, with a flexible Kevlar clamp band, for use as a hold-down and release mechanism (HDRM) for a deployable de-orbit sail. The HDRM is designed to be three-failure-tolerant, highly reliable, yet simple and low-cost.

  6. Stomatal Function Requires Pectin De-methyl-esterification of the Guard Cell Wall.

    Science.gov (United States)

    Amsbury, Sam; Hunt, Lee; Elhaddad, Nagat; Baillie, Alice; Lundgren, Marjorie; Verhertbruggen, Yves; Scheller, Henrik V; Knox, J Paul; Fleming, Andrew J; Gray, Julie E

    2016-11-07

    Stomatal opening and closure depends on changes in turgor pressure acting within guard cells to alter cell shape [1]. The extent of these shape changes is limited by the mechanical properties of the cells, which will be largely dependent on the structure of the cell walls. Although it has long been observed that guard cells are anisotropic due to differential thickening and the orientation of cellulose microfibrils [2], our understanding of the composition of the cell wall that allows them to undergo repeated swelling and deflation remains surprisingly poor. Here, we show that the walls of guard cells are rich in un-esterified pectins. We identify a pectin methylesterase gene, PME6, which is highly expressed in guard cells and required for stomatal function. pme6-1 mutant guard cells have walls enriched in methyl-esterified pectin and show a decreased dynamic range in response to triggers of stomatal opening/closure, including elevated osmoticum, suggesting that abrogation of stomatal function reflects a mechanical change in the guard cell wall. Altered stomatal function leads to increased conductance and evaporative cooling, as well as decreased plant growth. The growth defect of the pme6-1 mutant is rescued by maintaining the plants in elevated CO 2 , substantiating gas exchange analyses, indicating that the mutant stomata can bestow an improved assimilation rate. Restoration of PME6 rescues guard cell wall pectin methyl-esterification status, stomatal function, and plant growth. Our results establish a link between gene expression in guard cells and their cell wall properties, with a corresponding effect on stomatal function and plant physiology. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  7. Work-related violence against security guards--who is most at risk?

    Science.gov (United States)

    Leino, Tuula; Selin, Risto; Summala, Heikki; Virtanen, Marianna

    2011-01-01

    Studies on violence in the work of security guards are largely lacking. This study is unique in that it focuses on security guards (n=1,010) in Finland, and assesses the different forms, prevalence, and risk factors of the work-related violence they often face. Information to a survey instrument was obtained by first interviewing 30 volunteers. Then we made a cross-sectional mailed survey that was sent to a randomized group of 2,000 security guards. The response rate was 52. We found the prevalence of verbal aggression, threats of assault, and physical acts against security guards at least once a month to be 39%, 19%, and 15% respectively. As regards risk factors and who is most at risk, our results show that male gender, young age, low work experience, late working hours, and time pressure were associated with all three forms of work-related violence. Unlike other forms of violence, verbal aggression was highly prevalent outside the metropolitan area and directed towards both more and less experienced security guards. In prevention policies for violence, it is important to identify high-risk groups such as those who have less work experience.

  8. Carbonic anhydrases are upstream regulators of CO2-controlled stomatal movements in guard cells

    KAUST Repository

    Hu, Honghong; Boisson-Dernier, Auré lien; Israelsson-Nordströ m, Maria; Bö hmer, Maik; Xue, Shaowu; Ries, Amber; Godoski, Jan; Kuhn, Josef M.; Schroeder, Julian I.

    2009-01-01

    photosynthesis and can function in guard cells. Furthermore, guard cell betaca-overexpressing plants exhibit instantaneous enhanced water use efficiency. Guard cell expression of mammalian alphaCAII complements the reduced sensitivity of ca1 ca4 plants, showing

  9. Triangulating and guarding realistic polygons

    NARCIS (Netherlands)

    Aloupis, G.; Bose, P.; Dujmovic, V.; Gray, C.M.; Langerman, S.; Speckmann, B.

    2008-01-01

    We propose a new model of realistic input: k-guardable objects. An object is k-guardable if its boundary can be seen by k guards in the interior of the object. In this abstract, we describe a simple algorithm for triangulating k-guardable polygons. Our algorithm, which is easily implementable, takes

  10. Nitric Oxide (NO) Measurements in Stomatal Guard Cells.

    Science.gov (United States)

    Agurla, Srinivas; Gayatri, Gunja; Raghavendra, Agepati S

    2016-01-01

    The quantitative measurement of nitric oxide (NO) in plant cells acquired great importance, in view of the multifaceted function and involvement of NO as a signal in various plant processes. Monitoring of NO in guard cells is quite simple because of the large size of guard cells and ease of observing the detached epidermis under microscope. Stomatal guard cells therefore provide an excellent model system to study the components of signal transduction. The levels and functions of NO in relation to stomatal closure can be monitored, with the help of an inverted fluorescence or confocal microscope. We can measure the NO in guard cells by using flouroprobes like 4,5-diamino fluorescein diacetate (DAF-2DA). This fluorescent dye, DAF-2DA, is cell permeable and after entry into the cell, the diacetate group is removed by the cellular esterases. The resulting DAF-2 form is membrane impermeable and reacts with NO to generate the highly fluorescent triazole (DAF-2T), with excitation and emission wavelengths of 488 and 530 nm, respectively. If time-course measurements are needed, the epidermis can be adhered to a cover-glass or glass slide and left in a small petri dishes. Fluorescence can then be monitored at required time intervals; with a precaution that excitation is done minimally, only when a fluorescent image is acquired. The present method description is for the epidermis of Arabidopsis thaliana and Pisum sativum and should work with most of the other dicotyledonous plants.

  11. 77 FR 18681 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Science.gov (United States)

    2012-03-28

    ..., Orig-B Falmouth, MA, Cape Cod Coast Guard Air Station, ILS OR LOC RWY 23, Amdt 1 Falmouth, MA, Cape Cod Coast Guard Air Station, ILS OR LOC RWY 32, Amdt 1 Westminster, MD, Carroll County Rgnl/Jack B Poage...

  12. Investigation of the Rock Fragmentation Process by a Single TBM Cutter Using a Voronoi Element-Based Numerical Manifold Method

    Science.gov (United States)

    Liu, Quansheng; Jiang, Yalong; Wu, Zhijun; Xu, Xiangyu; Liu, Qi

    2018-04-01

    In this study, a two-dimensional Voronoi element-based numerical manifold method (VE-NMM) is developed to analyze the granite fragmentation process by a single tunnel boring machine (TBM) cutter under different confining stresses. A Voronoi tessellation technique is adopted to generate the polygonal grain assemblage to approximate the microstructure of granite sample from the Gubei colliery of Huainan mining area in China. A modified interface contact model with cohesion and tensile strength is embedded into the numerical manifold method (NMM) to interpret the interactions between the rock grains. Numerical uniaxial compression and Brazilian splitting tests are first conducted to calibrate and validate the VE-NMM models based on the laboratory experiment results using a trial-and-error method. On this basis, numerical simulations of rock fragmentation by a single TBM cutter are conducted. The simulated crack initiation and propagation process as well as the indentation load-penetration depth behaviors in the numerical models accurately predict the laboratory indentation test results. The influence of confining stress on rock fragmentation is also investigated. Simulation results show that radial tensile cracks are more likely to be generated under a low confining stress, eventually coalescing into a major fracture along the loading axis. However, with the increase in confining stress, more side cracks initiate and coalesce, resulting in the formation of rock chips at the upper surface of the model. In addition, the peak indentation load also increases with the increasing confining stress, indicating that a higher thrust force is usually needed during the TBM boring process in deep tunnels.

  13. Leaf-Cutter Ant Fungus Gardens Are Biphasic Mixed Microbial Bioreactors That Convert Plant Biomass to Polyols with Biotechnological Applications

    Science.gov (United States)

    Somera, Alexandre F.; Lima, Adriel M.; dos Santos-Neto, Álvaro J.; Lanças, Fernando M.

    2015-01-01

    Leaf-cutter ants use plant matter to culture the obligate mutualistic basidiomycete Leucoagaricus gongylophorus. This fungus mediates ant nutrition on plant resources. Furthermore, other microbes living in the fungus garden might also contribute to plant digestion. The fungus garden comprises a young sector with recently incorporated leaf fragments and an old sector with partially digested plant matter. Here, we show that the young and old sectors of the grass-cutter Atta bisphaerica fungus garden operate as a biphasic solid-state mixed fermenting system. An initial plant digestion phase occurred in the young sector in the fungus garden periphery, with prevailing hemicellulose and starch degradation into arabinose, mannose, xylose, and glucose. These products support fast microbial growth but were mostly converted into four polyols. Three polyols, mannitol, arabitol, and inositol, were secreted by L. gongylophorus, and a fourth polyol, sorbitol, was likely secreted by another, unidentified, microbe. A second plant digestion phase occurred in the old sector, located in the fungus garden core, comprising stocks of microbial biomass growing slowly on monosaccharides and polyols. This biphasic operation was efficient in mediating symbiotic nutrition on plant matter: the microbes, accounting for 4% of the fungus garden biomass, converted plant matter biomass into monosaccharides and polyols, which were completely consumed by the resident ants and microbes. However, when consumption was inhibited through laboratory manipulation, most of the plant polysaccharides were degraded, products rapidly accumulated, and yields could be preferentially switched between polyols and monosaccharides. This feature might be useful in biotechnology. PMID:25911490

  14. Relational Reasoning for Markov Chains in a Probabilistic Guarded Lambda Calculus

    DEFF Research Database (Denmark)

    Aguirre, Alejandro; Barthe, Gilles; Birkedal, Lars

    2018-01-01

    We extend the simply-typed guarded $\\lambda$-calculus with discrete probabilities and endow it with a program logic for reasoning about relational properties of guarded probabilistic computations. This provides a framework for programming and reasoning about infinite stochastic processes like...

  15. The continuous 1.5D terrain guarding problem: Discretization, optimal solutions, and PTAS

    Directory of Open Access Journals (Sweden)

    Stephan Friedrichs

    2016-05-01

    Full Text Available In the NP-hard continuous 1.5D Terrain Guarding Problem (TGP we are given an $x$-monotone chain of line segments in $R^2$ (the terrain $T$, and ask for the minimum number of guards (located anywhere on $T$ required to guard all of $T$. We construct guard candidate and witness sets $G, W \\subset T$ of polynomial size such that any feasible (optimal guard cover $G^* \\subseteq G$ for $W$ is also feasible (optimal for the continuous TGP. This discretization allows us to: (1 settle NP-completeness for the continuous TGP; (2 provide a Polynomial Time Approximation Scheme (PTAS for the continuous TGP using the PTAS for the discrete TGP by Gibson et al.; (3 formulate the continuous TGP as an Integer Linear Program (IP. Furthermore, we propose several filtering techniques reducing the size of our discretization, allowing us to devise an efficient IP-based algorithm that reliably provides optimal guard placements for terrains with up to $10^6$ vertices within minutes on a standard desktop computer.

  16. Determination of Five Alternative Antifouling Agents Found Along the Korean Coasts.

    Science.gov (United States)

    Lee, Seongeon; Lee, Dongsup; Lee, Yong-Woo

    2017-07-01

      Since the ban of tri-butyl tin, other various alternative antifouling agents have been used. In this study, the contamination levels from these antifouling agents were examined in the main harbors in Korea. The sampled harbors were classified into four types and the levels of contamination from the antifouling agents were analyzed. The highest degree of contamination was found in the big harbors, followed by the fishing harbors, harbors near agricultural areas, and military and coast guard harbors. In addition, an increase in the number of ships that entered the ports significantly influenced the contamination by the antifouling agents. Correlation analysis was conducted to characterize the alternative antifouling agents. The results revealed strong correlations between the dichlofluanid and chlorothalonil, and between the chlorothalonil and TCMTB, because unlike Irgarol 1051 and SEA-NINE 211, which are used only as antifouling agents, chlorothalonil, dichlofluanid, and TCMTB are also used in agriculture.

  17. Automated intracranial pressure-controlled cerebrospinal fluid external drainage with LiquoGuard.

    Science.gov (United States)

    Linsler, Stefan; Schmidtke, Mareike; Steudel, Wolf Ingo; Kiefer, Michael; Oertel, Joachim

    2013-08-01

    LiquoGuard is a new device for intracranial pressure (ICP)-controlled drainage of cerebrospinal fluid (CSF). This present study evaluates the accuracy of ICP measurement via the LiquoGuard device in comparison with Spiegelberg. Thus, we compared data ascertained from simultaneous measurement of ICP using tip-transducer and tip-sensor devices. A total of 1,764 monitoring hours in 15 patients (range, 52-219 h) were analysed. All patients received an intraventricular Spiegelberg III probe with the drainage catheter connected to the LiquoGuard system. ICP reading of both devices was performed on an hourly basis. Statistical analysis was done by applying Pearson correlation and Wilcoxon-matched pair test (p drainage. However, LiquoGuard tends to provide misleading results in slit ventricles. Thus, before these drawbacks are further analysed, the authors recommend additional ICP measurement with internal tip-sensor devices to avoid dangerous erroneous interpretation of ICP data.

  18. 76 FR 62961 - Lifesaving Equipment: Production Testing and Harmonization With International Standards

    Science.gov (United States)

    2011-10-11

    .... Protection of Children J. Indian Tribal Governments K. Energy Effects L. International Trade Impacts M... appropriate Coast Guard oversight ultimately promotes safety, flexibility, and autonomy by permitting experts... will accept test reports from Coast Guard-accepted independent laboratories in support of approvals for...

  19. 75 FR 62469 - Drawbridge Operation Regulations; Newtown Creek, Dutch Kills, English Kills, and Their...

    Science.gov (United States)

    2010-10-12

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket No. USCG-2010-0907] Drawbridge Operation Regulations; Newtown Creek, Dutch Kills, English Kills, and Their Tributaries, NY, Maintenance AGENCY: Coast Guard, DHS. ACTION: Notice of temporary deviation from regulations. SUMMARY: The Commander...

  20. 75 FR 30299 - Drawbridge Operation Regulations; Newtown Creek, Dutch Kills, English Kills, and Their...

    Science.gov (United States)

    2010-06-01

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket No. USCG-2010-0355] Drawbridge Operation Regulations; Newtown Creek, Dutch Kills, English Kills, and Their Tributaries, NY, Maintenance AGENCY: Coast Guard, DHS. ACTION: Notice of temporary deviation from regulations. SUMMARY: The Commander...

  1. 77 FR 42637 - Navigation and Navigable Waters; Technical, Organizational, and Conforming Amendments; Corrections

    Science.gov (United States)

    2012-07-20

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Parts 84 and 115 [Docket No. USCG-2012-0306] RIN 1625-AB86 Navigation and Navigable Waters; Technical, Organizational, and Conforming Amendments...), the Coast Guard published a final rule entitled ``Navigation and Navigable Waters; Technical...

  2. 75 FR 49508 - Navigation Safety Advisory Council; Vacancies

    Science.gov (United States)

    2010-08-13

    ... Council; Vacancies AGENCY: Coast Guard, DHS. ACTION: Request for applications. SUMMARY: The Coast Guard seeks applications for membership on the Navigation Safety Advisory Council (NAVSAC). This Committee... prevention of collisions, rammings, and groundings. This includes, but is not limited to: Inland and...

  3. 76 FR 9646 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation...

    Science.gov (United States)

    2011-02-22

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Parts 100, 117, 147, and 165 [USCG-2010-0399] Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation Regulations and Regulated Navigation Areas AGENCY: Coast Guard, DHS. ACTION: Notice of expired temporary rules...

  4. 76 FR 2916 - Houston/Galveston Navigation Safety Advisory Committee; Meetings

    Science.gov (United States)

    2011-01-18

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard [USCG-2010-1116] Houston/Galveston Navigation Safety Advisory Committee; Meetings AGENCY: Coast Guard, DHS. ACTION: Notice of Meetings. SUMMARY: The Houston... will meet in Texas City, Texas and Houston, Texas to discuss waterway improvements, aids to navigation...

  5. Icing Management for Coast Guard Assets

    Science.gov (United States)

    2013-04-01

    manufactured from limestone and acetic acid ( vinegar ) or the fer- mentation of corn, contains no salts and is safely used on any surface where...de-icer that is used principally on runways. It is also made with acetic acid, vinegar that is reacted with sodium carbonate, sodium bicarbonate, or...cosmetic and pharmaceutical creams, a latex paint additive, an inhibitor of fermentation and mold growth, a plasticizer for resins, paper, brake and

  6. Tsunami Warning Services for the U.S. and Canadian Atlantic Coasts

    Science.gov (United States)

    Whitmore, P. M.; Knight, W.

    2008-12-01

    poses a challenge due to the lack of historic events. The probability and nature of potential sources along the offshore U.S./Canada region are not well understood. Warning/watch/advisory criteria are under review to improve TWC response. Primary tsunami warning contact points consist of NWS Weather Forecast Offices, state warning points, U.S. Coast Guard, and the military. These entities each have responsibility to propagate the message through specific channels. To help communities prepare for a tsunami warning, the NWS established the TsunamiReady program. TsunamiReady sets criteria for communities which include: reliable methods to receive TWC warnings, reliable methods to disseminate messages locally, pre-event planning, hazard/safe zones defined and public education. Once the criteria are met, the community can be recognized as TsunamiReady. A hypothetical event off the east coast is examined and a timeline given for TWC analysis and product issuance.

  7. Toolpath strategy for cutter life improvement in plunge milling of AISI H13 tool steel

    Science.gov (United States)

    Adesta, E. Y. T.; Avicenna; hilmy, I.; Daud, M. R. H. C.

    2018-01-01

    Machinability of AISI H13 tool steel is a prominent issue since the material has the characteristics of high hardenability, excellent wear resistance, and hot toughness. A method of improving cutter life of AISI H13 tool steel plunge milling by alternating the toolpath and cutting conditions is proposed. Taguchi orthogonal array with L9 (3^4) resolution will be employed with one categorical factor of toolpath strategy (TS) and three numeric factors of cutting speed (Vc), radial depth of cut (ae ), and chip load (fz ). It is expected that there are significant differences for each application of toolpath strategy and each cutting condition factor toward the cutting force and tool wear mechanism of the machining process, and medial axis transform toolpath could provide a better tool life improvement by a reduction of cutting force during machining.

  8. 77 FR 40624 - Information Collection Requests to Office of Management and Budget

    Science.gov (United States)

    2012-07-10

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard [USCG-2012-0598] Information Collection Requests to Office of Management and Budget AGENCY: Coast Guard, DHS. ACTION: Sixty-day notice requesting comments... Information Collection Requests (ICRs) to the Office of Management and Budget (OMB), Office of Information and...

  9. 78 FR 19504 - Information Collection Request to Office of Management and Budget

    Science.gov (United States)

    2013-04-01

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard [USCG-2013-0133] Information Collection Request to Office of Management and Budget AGENCY: Coast Guard, DHS. ACTION: Sixty-day notice requesting comments... Information Collection Request (ICR) to the Office of Management and Budget (OMB), Office of Information and...

  10. 46 CFR 169.807 - Notice of casualty.

    Science.gov (United States)

    2010-10-01

    ... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS... to mariners, radiograms sent and received, the radio log, and crew, sailing school student... jurisdiction of the Coast Guard, the person in charge of the vessel shall report the accident to the nearest...

  11. 78 FR 67027 - Nontank Vessel Response Plans and Other Response Plan Requirements

    Science.gov (United States)

    2013-11-08

    ... you have questions about this document, contact Lieutenant Commander John Peterson, Coast Guard... [email protected] . If you have questions about viewing the docket (USCG-2008-1070), call Ms. Barbara... Guard, DHS. ACTION: Rule; information collection approval. SUMMARY: On September 30, 2013, the Coast...

  12. 77 FR 5816 - Information Collection Requests to Office of Management and Budget

    Science.gov (United States)

    2012-02-06

    ... Information Collection Requests (ICRs) to the Office of Management and Budget (OMB), Office of Information and... DEPARTMENT OF HOMELAND SECURITY Coast Guard [USCG-2012-0016] Information Collection Requests to Office of Management and Budget AGENCY: Coast Guard, DHS. ACTION: Sixty-day notice requesting comments...

  13. 78 FR 3906 - Information Collection Request to Office of Management and Budget

    Science.gov (United States)

    2013-01-17

    ... intends to submit an Information Collection Request (ICR) to the Office of Management and Budget (OMB... DEPARTMENT OF HOMELAND SECURITY Coast Guard [USCG-2012-1096] Information Collection Request to Office of Management and Budget AGENCY: Coast Guard, DHS. ACTION: Sixty-day notice requesting comments...

  14. 75 FR 67990 - Information Collection Request to Office of Management and Budget; OMB

    Science.gov (United States)

    2010-11-04

    ...] Information Collection Request to Office of Management and Budget; OMB AGENCY: Coast Guard, DHS. ACTION: Sixty.... FOR FURTHER INFORMATION CONTACT: Mr. Arthur Requina, Office of Information Management, telephone 202....S. Coast Guard intends to submit an Information Collection Request (ICR) and Analysis to the Office...

  15. 77 FR 32657 - Information Collection Requests to Office of Management and Budget

    Science.gov (United States)

    2012-06-01

    ... Information Collection Requests (ICRs) to the Office of Management and Budget (OMB), Office of Information and... DEPARTMENT OF HOMELAND SECURITY Coast Guard [USCG-2012-0472] Information Collection Requests to Office of Management and Budget AGENCY: Coast Guard, DHS. ACTION: Sixty-day notice requesting comments...

  16. 78 FR 74155 - Information Collection Request to Office of Management and Budget

    Science.gov (United States)

    2013-12-10

    ... Information Collection Request (ICRs) to the Office of Management and Budget (OMB), Office of Information and... DEPARTMENT OF HOMELAND SECURITY Coast Guard [USCG-2013-0950] Information Collection Request to Office of Management and Budget AGENCY: Coast Guard, DHS. ACTION: Sixty-day notice requesting comments...

  17. 75 FR 80833 - Shipboard Air Emission Reduction Technology Report

    Science.gov (United States)

    2010-12-23

    ... technology. Through this notice, the Coast Guard and the Environmental Protection Agency invite the public to... technology for ships.\\1\\ At this time, the Coast Guard and the Environmental Protection Agency seek....S. Environmental Protection Agency, ``Regulatory Impact Analysis: Control of Air Pollution from...

  18. 76 FR 39885 - Risk-Based Targeting of Foreign Flagged Mobile Offshore Drilling Units (MODUs)

    Science.gov (United States)

    2011-07-07

    ... Foreign Flagged Mobile Offshore Drilling Units (MODUs) AGENCY: Coast Guard, DHS. ACTION: Notice of... 11-06, Risk-Based Targeting of Foreign Flagged Mobile Offshore Drilling Units (MODUs). This policy... applicable regulations, every foreign-flagged mobile offshore drilling unit (MODU) must undergo a Coast Guard...

  19. 75 FR 14609 - Commercial Fishing Industry Vessel Safety Advisory Committee; Vacancies

    Science.gov (United States)

    2010-03-26

    ... which Chapter 45 of Title 46, U.S.C. applies and persons representing the marine insurance industry... Industry Vessel Safety Advisory Committee; Vacancies AGENCY: Coast Guard, DHS. ACTION: Request for applications. SUMMARY: The Coast Guard seeks applications for membership on the Commercial Fishing Industry...

  20. 77 FR 15263 - Security Zone; Portland Rose Festival on Willamette River; Portland, OR

    Science.gov (United States)

    2012-03-15

    ... Zone; Portland Rose Festival on Willamette River; Portland, OR AGENCY: Coast Guard, DHS. ACTION: Notice of enforcement of regulation. SUMMARY: The Coast Guard will enforce the Portland Rose Festival... Willamette River during the Portland Rose festival. During the enforcement period, no person or vessel may...

  1. 77 FR 76299 - Towing Safety Advisory Committee

    Science.gov (United States)

    2012-12-27

    ... discuss potential new tasks related to development of manning policy for towing vessels operating on international and domestic waters, information transfer between vessels using the automatic identification... teleconference from U.S. Coast Guard Headquarters, come to Room 2501, U.S. Coast Guard Headquarters Building...

  2. 75 FR 69878 - Drawbridge Operation Regulation; Neuse River, New Bern, NC

    Science.gov (United States)

    2010-11-16

    ... Operation Regulation; Neuse River, New Bern, NC AGENCY: Coast Guard, DHS. ACTION: Notice of temporary deviation from regulations. SUMMARY: The Commander, Fifth Coast Guard District, has issued a temporary... is given. NSR has requested a temporary deviation to the existing regulations for the Neuse River...

  3. 75 FR 32661 - Special Local Regulation; Hydroplane Exhibition, Detroit River, Detroit, MI

    Science.gov (United States)

    2010-06-09

    ...; Detroit River; Detroit, MI. (a) Location. The following is a temporary special local regulation area: All...-AA08 Special Local Regulation; Hydroplane Exhibition, Detroit River, Detroit, MI AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard will enforce a temporary special local...

  4. 78 FR 22423 - Drawbridge Operation Regulations; Taunton River, Fall River and Somerset, MA

    Science.gov (United States)

    2013-04-16

    ... Operation Regulations; Taunton River, Fall River and Somerset, MA AGENCY: Coast Guard, DHS. ACTION: Notice of temporary deviation from regulation. SUMMARY: The Coast Guard is issuing a temporary deviation from the regulation governing the operation of the Brightman Street Bridge across the Taunton River...

  5. 78 FR 22894 - Collection of Information Under Review by Office of Management and Budget

    Science.gov (United States)

    2013-04-17

    ... Review by Office of Management and Budget AGENCY: Coast Guard, DHS. ACTION: Thirty-day notice requesting... forwarding an Information Collection Request (ICR), abstracted below, to the Office of Management and Budget... collection of information: 1625-NEW, United States Coast Guard Academy Introduction Mission Program...

  6. 77 FR 42753 - Federal Property Suitable as Facilities To Assist the Homeless

    Science.gov (United States)

    2012-07-20

    ... landholding agencies at the following addresses: Coast Guard: Commandant, United States Coast Guard, Attn... Facilities To Assist the Homeless AGENCY: Office of the Assistant Secretary for Community Planning and... surplus Federal property reviewed by HUD for suitability for use to assist the homeless. FOR FURTHER...

  7. 76 FR 34093 - Federal Property Suitable as Facilities To Assist the Homeless

    Science.gov (United States)

    2011-06-10

    ... landholding agencies at the following addresses: Coast Guard: Commandant, United States Coast Guard, Attn... Facilities To Assist the Homeless AGENCY: Office of the Assistant Secretary for Community Planning and... surplus Federal property reviewed by HUD for suitability for possible use to assist the homeless. [[Page...

  8. 75 FR 65366 - Federal Property Suitable as Facilities To Assist the Homeless

    Science.gov (United States)

    2010-10-22

    ... landholding agencies at the following addresses: Coast Guard: Commandant, United States Coast Guard, Attn... Facilities To Assist the Homeless AGENCY: Office of the Assistant Secretary for Community Planning and... surplus Federal property reviewed by HUD for suitability for possible use to assist the homeless. FOR...

  9. 78 FR 7442 - Federal Property Suitable as Facilities To Assist the Homeless

    Science.gov (United States)

    2013-02-01

    ... following addresses: Coast Guard: Commandant, United States Coast Guard, Attn: Jennifer Stomber, 2100 Second... Facilities To Assist the Homeless AGENCY: Office of the Assistant Secretary for Community Planning and... surplus Federal property reviewed by HUD for suitability for use to assist the homeless. FOR FURTHER...

  10. 77 FR 51817 - National Maritime Security Advisory Committee; Meeting

    Science.gov (United States)

    2012-08-27

    ... the information sharing efforts of the Coast Guard and DHS. (2) Cyber-Security. The Committee will... DEPARTMENT OF HOMELAND SECURITY Coast Guard [USCG-2012-0797] National Maritime Security Advisory...: The National Maritime Security Advisory Committee (NMSAC) will meet on September 11-12, 2012 in the...

  11. 78 FR 9709 - Draft Guidance Regarding Voluntary Inspection of Vessels for Compliance With the Maritime Labour...

    Science.gov (United States)

    2013-02-11

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard [Docket No. USCG-2012-1066] Draft Guidance Regarding Voluntary Inspection of Vessels for Compliance With the Maritime Labour Convention, 2006 AGENCY: Coast Guard... Labour Convention, 2006 (Convention), which enters into force on August 20, 2013. The NVIC will provide...

  12. 78 FR 47716 - Final Guidance Regarding Voluntary Inspection of Vessels for Compliance With the Maritime Labour...

    Science.gov (United States)

    2013-08-06

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard [Docket No. USCG-2012-1066] Final Guidance Regarding Voluntary Inspection of Vessels for Compliance With the Maritime Labour Convention, 2006 AGENCY: Coast Guard... procedures regarding the inspection of U.S. vessels for voluntary compliance with the Maritime Labour...

  13. Department of Homeland Security Semiannual Regulatory Agenda

    Science.gov (United States)

    2010-12-20

    ... abandoned and help prevent future marine pollution. This rulemaking supports the Coast Guard's broad role... overloading or operating these vessels in hazardous weather conditions. This rulemaking would support the Coast Guard's broad role and responsibility of maritime safety. Timetable: Action Date FR Cite NPRM 08...

  14. 77 FR 18253 - Information Collection Request to Office of Management and Budget

    Science.gov (United States)

    2012-03-27

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard [USCG-2012-0173] Information Collection Request to Office of Management and Budget AGENCY: Coast Guard, DHS. ACTION: Sixty-day notice requesting comments... Information Collection Request (ICR) to the Office of Management and Budget (OMB), Office of Information and...

  15. 78 FR 17917 - Medical Waivers for Merchant Mariner Credential Applicants With a History of Seizure Disorders

    Science.gov (United States)

    2013-03-25

    ... be considered for a waiver. (1) Mariners with a history of epilepsy or seizure disorder may be... Waivers for Merchant Mariner Credential Applicants With a History of Seizure Disorders AGENCY: Coast Guard... of seizure disorders. Coast Guard regulations provide that convulsive disorders (also known as...

  16. 75 FR 35651 - Safety Zone, Long Island Sound Annual Fireworks Displays

    Science.gov (United States)

    2010-06-23

    ... Zone, Long Island Sound Annual Fireworks Displays AGENCY: Coast Guard, DHS. ACTION: Notice of enforcement of regulation. SUMMARY: The Coast Guard will enforce annual fireworks display safety zones for thirteen fireworks displays taking place throughout the Sector Long Island Sound Captain of the Port Zone...

  17. Learning Without Boundaries: A NASA - National Guard Bureau Distance Learning Partnership

    Science.gov (United States)

    Anderson, Susan H.; Chilelli, Christopher J.; Picard, Stephan

    2003-01-01

    With a variety of high-quality live interactive educational programs originating at the Johnson Space Center in Houston, Texas and other space and research centers, the US space agency NASA (National Aeronautics and Space Administration) has a proud track record of connecting with students throughout the world and stimulating their creativity and collaborative skills by teaching them underlying scientific and technological underpinnings of space exploration. However, NASA desires to expand its outreach capability for this type of interactive instruction. In early 2002, NASA and the National Guard Bureau -- using the Guard's nationwide system of state-ofthe-art classrooms and high bandwidth network -- began a collaboration to extend the reach of NASA content and educational programs to more of America's young people. Already, hundreds of elementary, middle, and high school students have visited Guard e-Learning facilities and participated in interactive NASA learning events. Topics have included experimental flight, satellite imagery-interpretation, and Mars exploration. Through this partnership, NASA and the National Guard are enabling local school systems throughout the United States (and, increasingly, the world) to use the excitement of space flight to encourage their students to become passionate about the possibility of one day serving as scientists, mathematicians, technologists, and engineers. At the 54th International Astronautical Conference MAJ Stephan Picard, the guiding visionary behind the Guard's partnership with NASA, and Chris Chilelli, an educator and senior instructional designer at NASA, will share with attendees background on NASA's educational products and the National Guard's distributed learning network; will discuss the unique opportunity this partnership already has provided students and teachers throughout the United States; will offer insights into the formation by government entities of e-Learning partnerships with one another; and will

  18. 5 CFR 831.306 - Service as a National Guard technician before January 1, 1969.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Service as a National Guard technician... National Guard technician before January 1, 1969. (a) Definitions. In this section—(1) Service as a National Guard technician is service performed under section 709 of title 32, United States Code (or under...

  19. MAPK cascades in guard cell signal transduction

    Directory of Open Access Journals (Sweden)

    Yuree eLee

    2016-02-01

    Full Text Available Guard cells form stomata on the epidermis and continuously respond to endogenous and environmental stimuli to fine-tune the gas exchange and transpirational water loss, processes which involve mitogen-activated protein kinase (MAPK cascades. MAPKs form three-tiered kinase cascades with MAPK kinases and MAPK kinase kinases, by which signals are transduced to the target proteins. MAPK cascade genes are highly conserved in all eukaryotes, and they play crucial roles in myriad developmental and physiological processes. MAPK cascades function during biotic and abiotic stress responses by linking extracellular signals received by receptors to cytosolic events and gene expression. In this review, we highlight recent findings and insights into MAPK-mediated guard cell signaling, including the specificity of MAPK cascades and the remaining questions.

  20. Role of guard rings in improving the performance of silicon detectors

    Indian Academy of Sciences (India)

    number of free charge carriers thus produced is proportional to the energy deposited. 259 .... grounding the innermost guard ring of a strip detector of geometry 60 × 60 mm2. ... The guard ring was kept floating with no electrical connection .... ment of maintaining high-quality semiconductor properties during high temperature.

  1. 76 FR 47529 - Port Access Route Study: In the Waters of Montauk Channel and Block Island Sound

    Science.gov (United States)

    2011-08-05

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 167 [Docket No. USCG-2005-21650] Port...: The Coast Guard announces the availability of Preliminary Study Recommendations of a Port Access Route... help reduce the risk of marine casualties and increase vessel traffic management efficiency in the...

  2. 77 FR 22495 - Safety Zone; Lake Pontchartrain, New Orleans, LA

    Science.gov (United States)

    2012-04-16

    ...-AA00 Safety Zone; Lake Pontchartrain, New Orleans, LA AGENCY: Coast Guard, DHS. ACTION: Temporary final..., Sector New Orleans, Coast Guard; telephone 504-365-2281, email [email protected] . If you have... proposed rulemaking (NPRM) entitled Safety Zone, Lake Pontchartrain, New Orleans, LA in the Federal...

  3. 77 FR 9879 - Safety Zone; Lake Pontchartrain, New Orleans, LA

    Science.gov (United States)

    2012-02-21

    ...-AA00 Safety Zone; Lake Pontchartrain, New Orleans, LA AGENCY: Coast Guard, DHS. ACTION: Notice of... in New Orleans, Louisiana. This temporary safety zone is necessary to protect persons and vessels..., call or email Lieutenant Commander (LCDR) Marcie Kohn, Sector New Orleans, Coast Guard; telephone 504...

  4. 75 FR 12561 - Delaware River and Bay Oil Spill Advisory Committee; Meeting Cancelled

    Science.gov (United States)

    2010-03-16

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard [Docket No. USCG-2008-0333] Delaware River and Bay Oil Spill Advisory Committee; Meeting Cancelled AGENCY: Coast Guard, DHS. ACTION: Notice of cancellation of...) is cancelled. FOR FURTHER INFORMATION CONTACT: Gerald Conrad, Liaison to the DFO of the DRBOSAC, (215...

  5. 77 FR 59575 - Hull Identification Numbers for Recreational Vessels

    Science.gov (United States)

    2012-09-28

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 181 [Docket No. USCG-2012-0843] Hull Identification Numbers for Recreational Vessels AGENCY: Coast Guard, DHS. ACTION: Request for public comments... requirement to indicate a boat's model year as part of the 12-character Hull Identification Number (HIN...

  6. 75 FR 48564 - Navigation and Navigable Waters; Technical, Organizational, and Conforming Amendments, Sector...

    Science.gov (United States)

    2010-08-11

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Parts 3 and 165 [Docket No. USCG-2010-0351] RIN 1625-ZA25 Navigation and Navigable Waters; Technical, Organizational, and Conforming Amendments, Sector Columbia River, WA AGENCY: Coast Guard, DHS. ACTION: Final rule. SUMMARY: This rule makes non-substantive...

  7. 76 FR 34865 - Safety Zone; Rochester Harbor Festival, Genesee River, Rochester, NY

    Science.gov (United States)

    2011-06-15

    ...-AA00 Safety Zone; Rochester Harbor Festival, Genesee River, Rochester, NY AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary safety zone on the Genesee River, Rochester, NY for the Rochester Harbor Festival fireworks. This zone is intended to...

  8. 78 FR 36658 - Safety Zone; Delaware River Waterfront Corp. Fireworks Display, Delaware River; Camden, NJ

    Science.gov (United States)

    2013-06-19

    ... portion of the Delaware River from operating while a fireworks event is taking place. This temporary...-AA00 Safety Zone; Delaware River Waterfront Corp. Fireworks Display, Delaware River; Camden, NJ AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary...

  9. 77 FR 70886 - Reconsideration of Letters of Recommendation for Waterfront Facilities Handling LNG and LHG

    Science.gov (United States)

    2012-11-28

    ...., Monday through Friday, except Federal holidays. You may also find this docket on the Internet by going to... security concerns prompted the Coast Guard to address vessel operations near the facility, the Coast Guard... effects, distributive impacts, and equity). Executive Order 13563 emphasizes the importance of quantifying...

  10. 76 FR 31350 - Cruise Vessel Safety and Security Act of 2010, Available Technology

    Science.gov (United States)

    2011-05-31

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard [Docket No. USCG-2011-0357] Cruise Vessel Safety and Security Act of 2010, Available Technology AGENCY: Coast Guard, DHS. ACTION: Notice of request for comments... Security and Safety Act of 2010(CVSSA), specifically related to video recording and overboard detection...

  11. 33 CFR 165.1182 - Safety/Security Zone: San Francisco Bay, San Pablo Bay, Carquinez Strait, and Suisun Bay, CA.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety/Security Zone: San... Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY... Areas Eleventh Coast Guard District § 165.1182 Safety/Security Zone: San Francisco Bay, San Pablo Bay...

  12. 33 CFR 165.154 - Safety and Security Zones: Long Island Sound Marine Inspection Zone and Captain of the Port Zone.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety and Security Zones: Long... Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY... Areas First Coast Guard District § 165.154 Safety and Security Zones: Long Island Sound Marine...

  13. 33 CFR 165.731 - Safety/Security Zone: Cumberland Sound, Georgia and St. Marys River Entrance Channel.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety/Security Zone: Cumberland... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED... Seventh Coast Guard District § 165.731 Safety/Security Zone: Cumberland Sound, Georgia and St. Marys River...

  14. 75 FR 28757 - Security Zone; Potomac River, Washington Channel, Washington, DC

    Science.gov (United States)

    2010-05-24

    ... potential terrorist acts, and enhance public and maritime safety and security. The Coast Guard was unable to...-ranking government officials, mitigating potential terrorist acts and enhancing public and maritime safety... terrorist acts and enhancing public and maritime safety and security. Basis and Purpose The Coast Guard will...

  15. 76 FR 24837 - Regulated Navigation Area; Columbus Day Weekend, Biscayne Bay, Miami, FL

    Science.gov (United States)

    2011-05-03

    .... Steiner, Sector Miami Prevention Department, Coast Guard; telephone 305-535-8724, e-mail Paul.A.Steiner... questions concerning its provisions or options for compliance, please contact Lieutenant Paul A. Steiner, Sector Miami Prevention Department, Coast Guard; telephone 305-535- 8724, e-mail Paul.A.Steiner@uscg.mil...

  16. 33 CFR 173.3 - Definitions.

    Science.gov (United States)

    2010-07-01

    ...: (a) [Reserved] (b) Issuing authority means a State that has a numbering system approved by the Coast Guard or the Coast Guard where a number system has not been approved. Issuing authorities are listed in..., firm, partnership, corporation, company, association, joint-stock association, or governmental entity...

  17. 78 FR 74009 - Safety Zone; Nike Fireworks, Upper New York Bay, Ellis Island, NY

    Science.gov (United States)

    2013-12-10

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket No. USCG-2013-0962] Safety Zone; Nike Fireworks, Upper New York Bay, Ellis Island, NY AGENCY: Coast Guard, DHS. ACTION: Notice of... published in the Federal Register on November 9, 2011 (76 FR 69614). [[Page 74010

  18. 33 CFR 165.1321 - Security Zone; Protection of Military Cargo, Captain of the Port Zone Puget Sound, WA.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Security Zone; Protection of... Areas Thirteenth Coast Guard District § 165.1321 Security Zone; Protection of Military Cargo, Captain of... Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY...

  19. 78 FR 20686 - Federal Property Suitable as Facilities To Assist the Homeless

    Science.gov (United States)

    2013-04-05

    ...-8145; Coast Guard: Commandant, United States Coast Guard, Attn: Jennifer Stomber, 2100 Second St. SW... Facilities To Assist the Homeless AGENCY: Office of the Assistant Secretary for Community Planning and... surplus Federal property reviewed by HUD for suitability for use to assist the homeless. FOR FURTHER...

  20. 78 FR 77697 - Federal Property Suitable as Facilities To Assist the Homeless

    Science.gov (United States)

    2013-12-24

    ... Pentagon, Washington, DC 20310, (571) 256-8145; Coast Guard: Commandant, United States Coast Guard, Attn... Facilities To Assist the Homeless AGENCY: Office of the Assistant Secretary for Community Planning and... surplus Federal property reviewed by HUD for suitability for use to assist the homeless. FOR FURTHER...

  1. 76 FR 2702 - Federal Property Suitable as Facilities To Assist the Homeless

    Science.gov (United States)

    2011-01-14

    ..., Arlington, VA 22202; (703) 601-2545; COAST GUARD: Commandant, United States Coast Guard, Attn: Jennifer... Facilities To Assist the Homeless AGENCY: Office of the Assistant Secretary for Community Planning and... surplus Federal property reviewed by HUD for suitability for possible use to assist the homeless. FOR...

  2. 76 FR 76984 - Federal Property Suitable as Facilities To Assist the Homeless

    Science.gov (United States)

    2011-12-09

    ..., Arlington, VA 22202: (571) 256-8145; COAST GUARD: Commandant, United States Coast Guard, Attn: Jennifer... Facilities To Assist the Homeless AGENCY: Office of the Assistant Secretary for Community Planning and... surplus Federal property reviewed by HUD for suitability for use to assist the homeless. FOR FURTHER...

  3. 78 FR 13883 - Federal Property Suitable as Facilities To Assist the Homeless

    Science.gov (United States)

    2013-03-01

    ..., Washington, DC 20024, (202) 401-0787; Coast Guard: Commandant, United States Coast Guard, Attn: Jennifer... Facilities To Assist the Homeless AGENCY: Office of the Assistant Secretary for Community Planning and... surplus Federal property reviewed by HUD for suitability for use to assist the homeless. FOR FURTHER...

  4. 77 FR 22217 - Drawbridge Operation Regulation; Oregon Slough, Hayden Island, OR

    Science.gov (United States)

    2012-04-13

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket No. USCG-2012-0290] Drawbridge Operation Regulation; Oregon Slough, Hayden Island, OR AGENCY: Coast Guard, DHS. ACTION: Notice of temporary..., at Hayden Island, OR. This deviation is necessary to accommodate maintenance of the train signaling...

  5. 46 CFR 167.01-1 - Basis and purpose of part.

    Science.gov (United States)

    2010-10-01

    ... uniform application. This part is not applicable to civilian nautical school ships. [CGD 95-028, 62 FR... Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS PUBLIC NAUTICAL SCHOOL... are prescribed and apply to public nautical school ships, except vessels of the Navy or Coast Guard...

  6. 76 FR 28315 - Security Zone; Portland Rose Festival on Willamette River

    Science.gov (United States)

    2011-05-17

    ... Zone; Portland Rose Festival on Willamette River AGENCY: Coast Guard, DHS. ACTION: Notice of enforcement of regulation. SUMMARY: The Coast Guard will enforce the Portland Rose Festival Security Zone in... River during the Portland Rose festival. During the enforcement period, no person or vessel may enter or...

  7. 46 CFR 159.010-7 - Recognized independent laboratory: Memorandum of Understanding.

    Science.gov (United States)

    2010-10-01

    ... independent laboratory and the Coast Guard; (7) An agreement to conduct comparison testing with other... for conducting comparison tests with other recognized laboratories. (d) Copies of MOUs signed by the... Understanding. 159.010-7 Section 159.010-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED...

  8. 78 FR 13691 - Guidance Regarding Inspection and Certification of Vessels Under the Maritime Security Program

    Science.gov (United States)

    2013-02-28

    ...-level approach would enable the Coast Guard to apply traditional inspection methods to newly reflagged... enrolled MSP vessels would continue to be inspected by the Coast Guard in a manner similar to traditional... oversight, and evaluations of Authorized Class Society (ACS) survey activities. We received eight public...

  9. 76 FR 58105 - Regulated Navigation Area; Saugus River, Lynn, MA

    Science.gov (United States)

    2011-09-20

    ... final rule. SUMMARY: The Coast Guard is establishing a Regulated Navigation Area (RNA) on the navigable... INFORMATION: Regulatory Information The Coast Guard is issuing this temporary rule without prior notice and... Pipeline bridge poses to the navigational channel necessitates that all mariners comply with this RNA...

  10. 76 FR 3644 - Collection of Information Under Review by Office of Management and Budget: OMB Control Number...

    Science.gov (United States)

    2011-01-20

    ... Review by Office of Management and Budget: OMB Control Number: 1625-0080 AGENCY: Coast Guard, DHS. ACTION... Office of Management and Budget (OMB), Office of Information and Regulatory Affairs (OIRA), requesting... comments identified by Coast Guard docket number [USCG-2010-0711] to the Docket Management Facility (DMF...

  11. 76 FR 70345 - Drawbridge Operation Regulations; Elizabeth River, Eastern Branch, Norfolk, VA

    Science.gov (United States)

    2011-11-14

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 117 [Docket No. USCG-2011-1022] Drawbridge Operation Regulations; Elizabeth River, Eastern Branch, Norfolk, VA AGENCY: Coast Guard, DHS. ACTION: Notice... periodic maintenance. The Norfolk Southern 5 Bridge, at mile 1.1, across the Elizabeth River (Eastern...

  12. Perceptions of Individual and Family Functioning Among Deployed Female National Guard Members.

    Science.gov (United States)

    Kelly, Patricia J; Cheng, An-Lin; Berkel, LaVerne A; Nilsson, Johanna

    2016-08-01

    Females currently make up 15% of U.S. military service members. Minimal attention has been paid to families of female National Guard members who have been deployed and their subsequent reintegration challenges. This cross-sectional Internet-based survey of female members of four National Guard units compared those who were and were not deployed. Instruments, guided by the variables of the Family Resilience Model, measured individual, family, and deployment-related factors. Bivariate analysis and ordinal logistic regression were done to assess differences between the groups. Of the 239 National Guard members surveyed, deployed women (n = 164) had significantly higher levels of posttraumatic stress disorder (PTSD; p family functioning were higher among deployed when compared with never deployed women. Results indicate community interventions that focus on strengthening coping skills of female Guard members would be useful for this population. © The Author(s) 2016.

  13. Joint FAM/Line Management Assessment Report on LLNL Machine Guarding Safety Program

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, J. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-07-19

    The LLNL Safety Program for Machine Guarding is implemented to comply with requirements in the ES&H Manual Document 11.2, "Hazards-General and Miscellaneous," Section 13 Machine Guarding (Rev 18, issued Dec. 15, 2015). The primary goal of this LLNL Safety Program is to ensure that LLNL operations involving machine guarding are managed so that workers, equipment and government property are adequately protected. This means that all such operations are planned and approved using the Integrated Safety Management System to provide the most cost effective and safest means available to support the LLNL mission.

  14. Common and unique elements of the ABA-regulated transcriptome of Arabidopsis guard cells

    Directory of Open Access Journals (Sweden)

    Zhao Zhixin

    2011-05-01

    Full Text Available Abstract Background In the presence of drought and other desiccating stresses, plants synthesize and redistribute the phytohormone abscisic acid (ABA. ABA promotes plant water conservation by acting on specialized cells in the leaf epidermis, guard cells, which border and regulate the apertures of stomatal pores through which transpirational water loss occurs. Following ABA exposure, solute uptake into guard cells is rapidly inhibited and solute loss is promoted, resulting in inhibition of stomatal opening and promotion of stomatal closure, with consequent plant water conservation. There is a wealth of information on the guard cell signaling mechanisms underlying these rapid ABA responses. To investigate ABA regulation of gene expression in guard cells in a systematic genome-wide manner, we analyzed data from global transcriptomes of guard cells generated with Affymetrix ATH1 microarrays, and compared these results to ABA regulation of gene expression in leaves and other tissues. Results The 1173 ABA-regulated genes of guard cells identified by our study share significant overlap with ABA-regulated genes of other tissues, and are associated with well-defined ABA-related promoter motifs such as ABREs and DREs. However, we also computationally identified a unique cis-acting motif, GTCGG, associated with ABA-induction of gene expression specifically in guard cells. In addition, approximately 300 genes showing ABA-regulation unique to this cell type were newly uncovered by our study. Within the ABA-regulated gene set of guard cells, we found that many of the genes known to encode ion transporters associated with stomatal opening are down-regulated by ABA, providing one mechanism for long-term maintenance of stomatal closure during drought. We also found examples of both negative and positive feedback in the transcriptional regulation by ABA of known ABA-signaling genes, particularly with regard to the PYR/PYL/RCAR class of soluble ABA receptors and

  15. Common and unique elements of the ABA-regulated transcriptome of Arabidopsis guard cells

    Science.gov (United States)

    2011-01-01

    Background In the presence of drought and other desiccating stresses, plants synthesize and redistribute the phytohormone abscisic acid (ABA). ABA promotes plant water conservation by acting on specialized cells in the leaf epidermis, guard cells, which border and regulate the apertures of stomatal pores through which transpirational water loss occurs. Following ABA exposure, solute uptake into guard cells is rapidly inhibited and solute loss is promoted, resulting in inhibition of stomatal opening and promotion of stomatal closure, with consequent plant water conservation. There is a wealth of information on the guard cell signaling mechanisms underlying these rapid ABA responses. To investigate ABA regulation of gene expression in guard cells in a systematic genome-wide manner, we analyzed data from global transcriptomes of guard cells generated with Affymetrix ATH1 microarrays, and compared these results to ABA regulation of gene expression in leaves and other tissues. Results The 1173 ABA-regulated genes of guard cells identified by our study share significant overlap with ABA-regulated genes of other tissues, and are associated with well-defined ABA-related promoter motifs such as ABREs and DREs. However, we also computationally identified a unique cis-acting motif, GTCGG, associated with ABA-induction of gene expression specifically in guard cells. In addition, approximately 300 genes showing ABA-regulation unique to this cell type were newly uncovered by our study. Within the ABA-regulated gene set of guard cells, we found that many of the genes known to encode ion transporters associated with stomatal opening are down-regulated by ABA, providing one mechanism for long-term maintenance of stomatal closure during drought. We also found examples of both negative and positive feedback in the transcriptional regulation by ABA of known ABA-signaling genes, particularly with regard to the PYR/PYL/RCAR class of soluble ABA receptors and their downstream targets

  16. Industrious leaf cutter ants and their carbon footprints

    Science.gov (United States)

    Swanson, A. C.; Dierick, D.; Trahan, N. A.; Allen, M. F.; Schwendenmann, L.; Harmon, T. C.; Oberbauer, S. F.; Fernandez Bou, A. S.; Zelikova, T. J.

    2017-12-01

    Leaf cutter ants (LCA) are considered ecosystem engineers in Neotropical forest ecosystems because they alter physical and environmental conditions for other organisms. LCA excavate large underground nests, maintaining intricate tunnels and fungal and waste chambers, and they continuously bring in vast amounts of fresh leaf material. In order to understand their ecosystem-wide impacts, we set out to determine whether their engineering activities fundamentally alter soil structure, soil nutrient pools, and gas fluxes in a wet tropical rainforest in Costa Rica. To directly compare LCA nest to non-nest sites, we utilized embedded sensor arrays with series of soil moisture, CO2, O2, and temperature sensors placed at four soil depths and automated minirhizotrons (AMR) to measure root and hyphal production and turnover. We also collected soils for biogeochemical analyses and measured soil CO2 fluxes and carbon isotope ratios of below-ground CO2 for two years. Our measurements confirmed that LCA alter their soil environment to regulate internal soil CO2 concentrations, moisture, and temperature, increasing O2 concentrations in the process. There were marked differences in soil structure inside nests relative to non-nests and these were associated with increased root and hyphal production and turnover in nests. Soil C, N, P, and their respective degrading enzymes were highly variable among sites and between nests and controls but N and P increased with soil depth and were generally higher in nests than controls. Contrary to our expectations, C mineralization rates were lower in nests but CO2 fluxes were high from nest vents and similar to non-nests elsewhere. At the system scale, LCA appear to fundamentally change the soil environment inside their nests and create spatial heterogeneity in biogeochemical processes and root and hyphal growth, influencing the overall C balance of Neotropical forests.

  17. Early Intervention to Reduce Alcohol Misuse and Abuse in the Ohio Army National Guard

    Science.gov (United States)

    2017-09-01

    PTSD, depression , 7 suicidality , lowered resilience and work performance.  Studies consistently find that substantial number of Guard members misuse...including PTSD, depression , suicidality , lowered resilience and work performance.  Studies consistently find that substantial number of Guard members misuse...Guard members that contributes to and complicates other problems including PTSD, depression , suicidality , lowered resilience and work performance

  18. 29 CFR 1910.23 - Guarding floor and wall openings and holes.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 5 2010-07-01 2010-07-01 false Guarding floor and wall openings and holes. 1910.23 Section... floor and wall openings and holes. (a) Protection for floor openings. (1) Every stairway floor opening... opening and hole shall be guarded by a standard skylight screen or a fixed standard railing on all exposed...

  19. 33 CFR 67.01-10 - Delegation of functions.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Delegation of functions. 67.01-10 Section 67.01-10 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO... Delegation of functions. The Coast Guard District Commander may delegate the authority for performing...

  20. 75 FR 67991 - Information Collection Request to Office of Management and Budget; OMB

    Science.gov (United States)

    2010-11-04

    ...] Information Collection Request to Office of Management and Budget; OMB AGENCY: Coast Guard, DHS. ACTION: Sixty... INFORMATION CONTACT: Mr. Arthur Requina, Office of Information Management, telephone 202-475-3523, or fax 202....S. Coast Guard intends to submit an Information Collection Request (ICR) and Analysis to the Office...

  1. 33 CFR 165.1407 - Security Zones; Oahu, HI.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Security Zones; Oahu, HI. 165.1407 Section 165.1407 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... Navigation Areas and Limited Access Areas Fourteenth Coast Guard District § 165.1407 Security Zones; Oahu, HI...

  2. 75 FR 42608 - Safety Zone; Lyme Community Days, Chaumont Bay, NY

    Science.gov (United States)

    2010-07-22

    ...-AA00 Safety Zone; Lyme Community Days, Chaumont Bay, NY AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary safety zone for Lyme Community Days Fireworks on Chaumont Bay, Lyme, New York. All vessels are prohibited from transiting the zone except as...

  3. 77 FR 42179 - Safety Zone; Fireworks Display, Potomac River, Charles County, Newburg, MD

    Science.gov (United States)

    2012-07-18

    ...]30[sec] W, located at Newburg in Charles County, Maryland (NAD 1983). The temporary safety zone will... 1625-AA00 Safety Zone; Fireworks Display, Potomac River, Charles County, Newburg, MD AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard will establish a safety zone upon...

  4. 76 FR 51887 - Safety Zone; Patuxent River, Patuxent River, MD

    Science.gov (United States)

    2011-08-19

    ...-AA00 Safety Zone; Patuxent River, Patuxent River, MD AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary safety zone during the ``NAS Patuxent River... held over certain waters of the Patuxent River adjacent to Patuxent River, Maryland from September 1...

  5. 78 FR 46810 - Safety Zone; Motion Picture Filming; Chicago River; Chicago, IL

    Science.gov (United States)

    2013-08-02

    ... portion of the Chicago River due to the filming of a motion picture. These temporary safety zones are...-AA00 Safety Zone; Motion Picture Filming; Chicago River; Chicago, IL AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing three temporary safety [[Page 46811

  6. 78 FR 76751 - Safety Zone; Vessel Launch; Menominee River; Marinette, WI

    Science.gov (United States)

    2013-12-19

    ...-AA00 Safety Zone; Vessel Launch; Menominee River; Marinette, WI AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary safety zone on the Menominee River in Marinette, Wisconsin. This zone is intended to restrict vessels from a portion of the Menominee...

  7. 77 FR 48431 - Safety Zone for Fireworks Display, Pamlico and Tar Rivers; Washington, NC

    Science.gov (United States)

    2012-08-14

    ... near the Pamlico and Tar Rivers to commemorate Beaufort County's 300th anniversary. The temporary... 1625-AA00 Safety Zone for Fireworks Display, Pamlico and Tar Rivers; Washington, NC AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary safety zone on...

  8. 77 FR 9847 - Safety Zone; Kinnickinnic River Containment and Cleanup; Milwaukee, WI

    Science.gov (United States)

    2012-02-21

    ... Kinnickinnic River due to the petroleum cleanup efforts. This temporary safety zone is necessary to protect the...-AA00 Safety Zone; Kinnickinnic River Containment and Cleanup; Milwaukee, WI AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary safety zone on the...

  9. 77 FR 39393 - Special Local Regulation; Upper Mississippi River, Mile 842.0 to 840.0

    Science.gov (United States)

    2012-07-03

    ... is establishing a temporary special local regulation for all waters of the Upper Mississippi River... 1625-AA00 Special Local Regulation; Upper Mississippi River, Mile 842.0 to 840.0 AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary special local...

  10. 76 FR 19380 - Notice of Entry Into Effect of MARPOL Annex V Wider Caribbean Region Special Area

    Science.gov (United States)

    2011-04-07

    ... Effect of MARPOL Annex V Wider Caribbean Region Special Area AGENCY: Coast Guard, DHS. ACTION: Notice. SUMMARY: The Coast Guard announces the date for the entry into effect of discharge requirements from ships in the Wider Caribbean Region (WCR) special area (SA) as specified in the International Convention...

  11. 75 FR 22323 - Anchorage Regulations; Port of New York

    Science.gov (United States)

    2010-04-28

    ...-AA01 Anchorage Regulations; Port of New York AGENCY: Coast Guard, DHS. ACTION: Supplemental notice of..., Coast Guard Sector New York, Waterways Management Division; telephone 718-354-4195, e-mail Jeff.M.Yunker... Purpose The Hudson River Pilots Association, through the Port of New York/ New Jersey Harbor Safety...

  12. 33 CFR 165.169 - Safety and Security Zones: New York Marine Inspection Zone and Captain of the Port Zone.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety and Security Zones: New... Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY... Areas First Coast Guard District § 165.169 Safety and Security Zones: New York Marine Inspection Zone...

  13. 77 FR 32898 - Safety & Security Zones; OPSAIL 2012 Connecticut, Thames River, New London, CT

    Science.gov (United States)

    2012-06-04

    ... 1625-AA00; AA87 Safety & Security Zones; OPSAIL 2012 Connecticut, Thames River, New London, CT AGENCY... 20, 2012 the Coast Guard published a notice of proposed rulemaking entitled Safety & Security Zones... Homeland Security Delegation No. 0170.1, which collectively authorize the Coast Guard to define safety and...

  14. 33 CFR 165.502 - Safety and Security Zone; Cove Point Liquefied Natural Gas Terminal, Chesapeake Bay, Maryland.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety and Security Zone; Cove... Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY... Areas Fifth Coast Guard District § 165.502 Safety and Security Zone; Cove Point Liquefied Natural Gas...

  15. 77 FR 19967 - Safety Zone, Port of Dutch Harbor; Dutch Harbor, AK

    Science.gov (United States)

    2012-04-03

    ...-AA00 Safety Zone, Port of Dutch Harbor; Dutch Harbor, AK AGENCY: Coast Guard, DHS. ACTION: Notice of proposed rulemaking. SUMMARY: The Coast Guard proposes temporary safety zones in the Port of Dutch Harbor... Dutch Harbor, Alaska, and the adjacent territorial sea due to additional vessel traffic associated with...

  16. 33 CFR 165.T11-304 - Safety zone; Sea World Summer Nights Fireworks; Mission Bay, San Diego, California.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety zone; Sea World Summer... Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY... Areas Eleventh Coast Guard District § 165.T11-304 Safety zone; Sea World Summer Nights Fireworks...

  17. 77 FR 70174 - Waterway Suitability Assessment for Expansion of Liquefied Gas Terminals; Houston and Texas City, TX

    Science.gov (United States)

    2012-11-23

    ... Assessment for Expansion of Liquefied Gas Terminals; Houston and Texas City, TX AGENCY: Coast Guard, DHS... Assessment to the Coast Guard Captain of the Port, Sector Houston-Galveston regarding the company's proposed expansion of its Liquefied Hazardous Gas (LHG) facilities in Houston and Texas City, Texas, and increased...

  18. 33 CFR 5.05 - Organization.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Organization. 5.05 Section 5.05 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY GENERAL COAST GUARD AUXILIARY § 5.05 Organization. The Auxiliary is a nonmilitary organization administered by the Commandant, under...

  19. 77 FR 35701 - Collection of Information Under Review by Office of Management and Budget

    Science.gov (United States)

    2012-06-14

    ..., 725 17th Street NW., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand.... To ensure your comments are received in a timely manner, mark the fax, attention Desk Officer for the... Admiral, U.S. Coast Guard, Assistant Commandant for Command, Control, Communications, Computers and...

  20. 77 FR 53898 - Collection of Information Under Review by Office of Management and Budget

    Science.gov (United States)

    2012-09-04

    ..., 725 17th Street NW., Washington, DC 20503, attention Desk Officer for the Coast Guard. (3) Hand.... To ensure your comments are received in a timely manner, mark the fax, attention Desk Officer for the.... Day, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Command, Control, Communications...