Demographic Subgroup Trends among Adolescents in the Use of Various Licit and Illicit Drugs, 1975-2015. Monitoring the Future Occasional Paper Series. Paper 86

Science.gov (United States)

Johnston, Lloyd D.; O'Malley, Patrick M.; Miech, Richard A.; Bachman, Jerald G.; Schulenberg, John E.

2016-01-01

This occasional paper presents national demographic subgroup data for the 1975-2015 Monitoring the Future (MTF) national survey results on 8th, 10th, and 12th graders' use of drugs, alcohol, and tobacco. MTF is funded by the National Institute on Drug Abuse at the National Institutes of Health under a series of investigator-initiated, competitive…

Demographic Subgroup Trends among Adolescents in the Use of Various Licit and Illicit Drugs, 1975-2014. Monitoring the Future Occasional Paper Series. Paper 83

Science.gov (United States)

Johnston, Lloyd D.; O'Malley, Patrick M.; Miech, Richard A.; Bachman, Jerald G.; Schulenberg, John E.

2015-01-01

This occasional paper presents national demographic subgroup data for the 1975-2014 Monitoring the Future (MTF) national survey results on 8th, 10th, and 12th graders' use of drugs, alcohol, and tobacco. MTF is funded by the National Institute on Drug Abuse at the National Institutes of Health under a series of investigator-initiated, competitive…

(CMC)/gum arabic

Indian Academy of Sciences (India)

Administrator

material, which is widely used as food additives, washes, paste, etc. It is an anionic and ... This was ascribed to the good interaction between cassava starch and CMC ... drugs and also release the heavy metals to improve the agricultural soil.

The influence of carboxy methyl cellulose (CMC) on shale stability; Influencia do carboximetilcelulose (CMC) na estabilidade de folhelhos

Energy Technology Data Exchange (ETDEWEB)

Salles Filho, Antonio Alves de; Quezada, Augusto Eduardo Donoso [Grupo Ultra, XX (Brazil). Setor de Vendas Petroleo; Oliveira, Telma de [Grupo Ultra, XX (Brazil). Centro de Pesquisas e Desenvolvimento

1988-12-31

The methodology used in developing high and low viscosity purified CMC`s specific to salty and saturated drilling fluids is discussed. It is shown how CMC carboxy methyl groups, molecular weight, and uniformity of substitution affect the action of these products, decreasing overall drilling costs, substantially increasing penetration rates, and affording greater well wall stability. (author) 5 refs., 19 figs., 3 tabs.

Carboxymethyl cellulose (CMC whey product as protein source for growing pigs 

Directory of Open Access Journals (Sweden)

Matti Näsi

1982-12-01

Full Text Available A digestibility and balance trial was performed with three growing pigs to evaluate the nutritive value and protein utilization of a carboxymethyl cellulose(CMC whey product used to replace 50 % or 100 % of the dried skim supplement in a barley-based diet. The effect of CMC whey on clinical chemical blood parameters was also investigated. The CMC whey protein contained 39.6 % crude protein and 36.0 % true protein in DM. The proportion of CMC in the product was 18.3% of DM. CMC whey had high contents of lysine, cystine, methionine and threonine: 10.3, 2.9, 2.1 and 5.6 g/16 g N, respectively. NFE digestibility was lower on the CMC whey diet than on the skim milk diet (P < 0.05. Faecal excretion of CMC averaged 59.0 %. Protein utilization was effective on the CMC whey diet: 69.9 % of absorbed N was retained. Judging from the blood analyses, the CMC whey product did not have any detrimental effect on the metabolism or health of the pigs. The CMC whey product is well suited as a protein supplement in pig feeding because of its high contents of essential amino acids.

Effective utilization of agro-waste by application of CMC dry-gel

International Nuclear Information System (INIS)

Yoshii, Fumio

2008-01-01

Radiation crosslinking, graft polymerization and degradation are useful technologies to improve polymer materials. Processability of radial tires and heat resistance of wire/cable is improved by crosslinking technology. Polysaccharides such as starch/cellulose of natural polymers and their derivatives are typical degradable polymers. Molecular weight of polysaccharides was remarkably reduced at lower dose, 50 kGy. To expand application field of polysaccharides, it is essential to obtain crosslinking structure. It was found that polysaccharide derivatives such as carboxymethyl cellulose (CMC) and carboxymethyl chitosan undergo crosslinking at past-like condition and form hydrogels. Concentration of past-like condition to induce crosslinking should be more than 10%. High molecular weight (Mw) and high degree of substitution (DS) is preferable for crosslinking of polysaccharide derivatives. In this paper, treatment of agro waste and improvement of Japanese traditional paper by addition of CMC dry gel is reported. (author)

〈研究ノート〉文献解題　Warren J McGregor: Liabilities─The Neglected Element : A Conceptual Analysis of the Financial Reporting of Liabilities（AASB Occasional Paper No. 1）

OpenAIRE

赤塚, 尚之

2015-01-01

The aim of this paper is to introduce the proposals of AASB Occasional Paper No. 1 in the Japanese language. This Occasional Paper focuses on the accounting for liabilities（ definition, recognition, measurement, and disclosure issues） neglected until recently. As far as I know, there are no materials in Japan that focus on the Occasional Paper itself except ASBJ（ 2013） prepared for the ASAF meeting held on December 2013. 　Occasional Paper No. 1 leads the proposals of accounting for liabiliti...

Does CMC Promote Language Play? Exploring Humor in Two Modalities

Science.gov (United States)

Vandergriff, Ilona; Fuchs, Carolin

2009-01-01

In view of the growing body of research on humor and language play in computer-mediated communication (CMC) which--more than any other medium--has been associated with goofing off, joking, and other nonserious communication, this paper compares spontaneous foreign language play (L2 play) in text-only synchronous computer-mediated versus…

Effect of the addition of CMC on the aggregation behaviour of proteins

Energy Technology Data Exchange (ETDEWEB)

Yu, H.; Sabato, S.F.; D' Aprano, G.; Lacroix, M. E-mail: monique.lacroix@inrs-iaf.uquebec.ca

2004-10-01

The effect of carboxymethylcellulose (CMC) on the aggregation of formulation based on calcium caseinate, commercial whey protein (WPC), and a 1:1 mixture of soy protein isolate (SPI) and whey protein isolate (WPI) was investigated. Protein aggregation could be observed upon addition of CMC, as demonstrated by size-exclusion chromatography. This aggregation behaviour was enhanced by means of physical treatments, such as heating at 90 deg. C for 30 min or gamma-irradiation at 32 kGy. A synergy resulted from the combination of CMC to gamma-irradiation in Caseinate/CMC and SPI/WPI/CMC formulations. Furthermore, CMC prevented precipitation in irradiated protein solutions for a period of more than 3 months at 4 deg. C.

Effect of the addition of CMC on the aggregation behaviour of proteins

International Nuclear Information System (INIS)

Yu, H.; Sabato, S.F.; D'Aprano, G.; Lacroix, M.

2004-01-01

The effect of carboxymethylcellulose (CMC) on the aggregation of formulation based on calcium caseinate, commercial whey protein (WPC), and a 1:1 mixture of soy protein isolate (SPI) and whey protein isolate (WPI) was investigated. Protein aggregation could be observed upon addition of CMC, as demonstrated by size-exclusion chromatography. This aggregation behaviour was enhanced by means of physical treatments, such as heating at 90 deg. C for 30 min or gamma-irradiation at 32 kGy. A synergy resulted from the combination of CMC to gamma-irradiation in Caseinate/CMC and SPI/WPI/CMC formulations. Furthermore, CMC prevented precipitation in irradiated protein solutions for a period of more than 3 months at 4 deg. C

Asian-Pacific Papers. Occasional Papers Number 10.

Science.gov (United States)

McCarthy, Brian, Ed.

Sixteen papers are presented. Topics covered include language teaching, discourse analysis, code switching, phonetics, language and cultural identity, and descriptive and comparative studies. All presenters were from the Asia-Pacific area of the world. Papers include: "The Baba Malay Lexicon: Hokkien Loanwords in Baba Malay" (Anne…

Rationale for Haze Formation after Carboxymethyl Cellulose (CMC) Addition to Red Wine.

Science.gov (United States)

Sommer, Stephan; Dickescheid, Christian; Harbertson, James F; Fischer, Ulrich; Cohen, Seth D

2016-09-14

The aim of this study was to identify the source of haze formation in red wine after the addition of carboxymethyl cellulose (CMC) and to characterize the dynamics of precipitation. Ninety commercial wines representing eight grape varieties were collected, tested with two commercial CMC products, and analyzed for susceptibility to haze formation. Seventy-four of these wines showed a precipitation within 14 days independent of the CMC product used. The precipitates of four representative samples were further analyzed for elemental composition (CHNS analysis) and solubility under different conditions to determine the nature of the solids. All of the precipitates were composed of approximately 50% proteins and 50% CMC and polyphenols. It was determined that the interactions between CMC and bovine serum albumin are pH dependent in wine-like model solution. Furthermore, it was found that the color loss associated with CMC additions required the presence of proteins and cannot be observed with CMC and anthocyanins alone.

METHODOLOGICAL HURDLES IN CAPTURING CMC DATA: THE CASE OF THE MISSING SELF-REPAIR

Directory of Open Access Journals (Sweden)

Bryan Smith

2008-02-01

Full Text Available This paper reports on a study of the use of self-repair among learners of German in a task-based CMC environment. The purpose of the study was two-fold. The first goal sought to establish how potential interpretations of CMC data may be very different depending on the method of data collection and evaluation employed. The second goal was to explicitly examine the nature of CMC self-repair in the task-based foreign language CALL classroom. Paired participants (n=46 engaged in six jigsaw tasks over the course of one university semester via the chat function in Blackboard. Chat data were evaluated first by using only the chat log file and second by examining a video file of the screen capture of the entire interaction. Results show a fundamental difference in the interpretation of the chat interaction which varies as a function of the data collection and evaluation methods employed. The findings also suggest a possible difference in the nature of self-repair across face-to-face and SCMC environments. In view of the results, this paper calls for CALL researchers to abandon the reliance on printed chat log files when attempting to interpret SCMC interactional data.

A case study of learning writing in service-learning through CMC

Science.gov (United States)

Li, Yunxiang; Ren, LiLi; Liu, Xiaomian; Song, Yinjie; Wang, Jie; Li, Jiaxin

2011-06-01

Computer-mediated communication ( CMC ) through online has developed successfully with its adoption by educators. Service Learning is a teaching and learning strategy that integrates community service with academic instruction and reflection to enrich students further understanding of course content, meet genuine community needs, develop career-related skills, and become responsible citizens. This study focuses on an EFL writing learning via CMC in an online virtual environment of service places by taking the case study of service Learning to probe into the scoring algorithm in CMC. The study combines the quantitative and qualitative research to probe into the practical feasibility and effectiveness of EFL writing learning via CMC in service learning in China.

Synthesis and characterization of CMC from water hyacinth for lithium-ion battery applications

Science.gov (United States)

Hidayat, Sahrul; Susanty, Riveli, Nowo; Suroto, Bambang Joko; Rahayu, Iman

2018-02-01

Recently, the most dominating power supply on the mobile electronics market are rechargeable Lithium-ion batteries. This is because of a higher energy density and longer lifetime compared to similar rechargeable battery systems. One of the components that determine the performance of a lithium ion battery is the binder material, whether at the anode or the cathode. In commercial batteries, the material used as the binder is Polyvinylidene Difluoride (PVDF), with n-methyl-2-phyrrolidone (NMP) as the solvent. Both are synthetic materials that are expensive, toxic and harmful to the environment. An alternative binder material for lithium-ion battery electrodes is CMC (carboxymethyl cellulose) in a water solvent. CMC is cheaper than PVDF, non-toxic and more environmental friendly. CMC can be synthesized from several types of plants, such as water hyacinth, which is a weed plant with high cellulose content. The synthesis of CMC consists of three main steps, namely 1) the isolation process from water hyacinth, 2) the alkalization and carboxymethylation process and 3) the purification process to obtain CMC in high purity. FTIR characterization of the CMC shows five region of absorption bands. The bands in the region 1330-1400 cm-1 are due to symmetrical deformations of CH2 and OH groups. The ether bonds in CMC occur in the fingerprint region of 1250-1060 cm-1. The presence of new and strong absorption band around 1600 cm-1 is confirmed to the stretching vibration of the carboxyl group (COO-), while the one around 1415 cm-1 is assigned to carboxyl groups as it salts. The broad absorption band above 3400 cm-1 is due to the stretching frequency of the hydroxyl group (-OH). Purity test on three samples (CMC mesh-100, CMC mesh-60 and CMC, mesh-40) gives purity values of 99.89%, 99.99% and 99.89%, respectively. This proves that CMC have actually been formed with high purity.

Radiation Synthesis of Super absorbent CMC Based Hydrogels For Agriculture Applications

International Nuclear Information System (INIS)

Raafat, A.I.; Eid, M.; El-Arnaouty, M.B.

2010-01-01

A good hydrogels of carboxy methyl cellulose (CMC) and poly vinyl pyrrolidone (PVP) were synthesized by gamma radiation at different doses and compositions. The prepared hydrogels were characterized by (FTIR) and (SEM). The hydrogels properties such as gelation (%), swelling and water retention capability were investigated. As the content of PVP in PVP/CMC hydrogels increased the gelation (%) increased. The swelling ratio of prepared hydrogel decreased with increasing of irradiation doses and the temperature. The (PVP/CMC) hydrogen of composition (40:60) prepared at 20 kGy showed the highest swelling ratio. The addition of sodium bicarbonate (NaHCO 3 ) to the PVP/CMC hydrogels during the irradiation process decreases the swelling ratio. The water retention reveals a similar behavior for the different compositions. The swelling characteristics in the presence of different cations and anions in a swelling medium were studied. The hydrogels were also loaded with urea solutions as a model agrochemical and their potential application for controlled release has been investigated. The improve properties of the prepared materials suggested that, the (PVP/CMC) hydrogels can be use in agriculture applications

Milestones Towards Hot CMC Structures for Operational Space Rentry Vehicles

Science.gov (United States)

Hald, H.; Weihs, H.; Reimer, T.

2002-01-01

Hot structures made of ceramic matrix composites (CMC) for space reentry vehicles play a key role regarding feasibility of advanced and reusable future space transportation systems. Thus realization of applicable flight hardware concerning hot primary structures like a nose cap or body flaps and thermal protection systems (TPS) requires system competence w.r.t. sophisticated know how in material processing, manufacturing and qualification of structural components and in all aspects from process control, use of NDI techniques, arc jet testing, hot structure testing to flight concept validation. This goal has been achieved so far by DLR while following a dedicated development road map since more than a decade culminating at present in the supply of the nose cap system for NASA's X-38; the flight hardware has been installed successfully in October 2001. A number of unique hardware development milestones had to be achieved in the past to finally reach this level of system competence. It is the intention of this paper to highlight the most important technical issues and achievements from the essential projects and developments to finally provide a comprehensive insight into DLR's past and future development road map w.r.t. CMC hot structures for space reentry vehicles. Based on DLR's C/C-SiC material which is produced with the inhouse developed liquid silicon infiltration process (LSI) the development strategy first concentrated on basic material properties evaluation in various arc jet testing facilities. As soon as a basic understanding of oxidation and erosion mechanisms had been achieved further efforts concentrated on inflight verification of both materials and design concepts for hot structures. Consequently coated and uncoated C/C-SiC specimens were integrated into the ablative heat shield of Russian FOTON capsules and they were tested during two missions in 1992 and 1994. Following on, a hot structure experiment called CETEX which principally was a kind of a

Development of the Virginia Tech Department of Geosciences MEDL-CMC

Science.gov (United States)

Glesener, G. B.

2016-12-01

In 2015 the Virginia Tech Department of Geosciences took a leading role in increasing the level of support for Geoscience instructors by investing in the development of the Geosciences Modeling and Educational Demonstrations Laboratory Curriculum Materials Center (MEDL-CMC). The MEDL-CMC is an innovative curriculum materials center designed to foster new collaborative teaching and learning environments by providing hands-on physical models combined with education technology for instructors and outreach coordinators. The mission of the MEDL-CMC is to provide advanced curriculum material resources for the purpose of increasing and sustaining high impact instructional capacity in STEM education for both formal and informal learning environments. This presentation describes the development methods being used to implement the MEDL-CMC. Major development methods include: (1) adopting a project management system to support collaborations with stakeholders, (2) using a diversified funding approach to achieve financial sustainability and the ability to evolve with the educational needs of the community, and (3) establishing a broad collection of systems-based physical analog models and data collection tools to support integrated sciences such as the geosciences. Discussion will focus on how these methods are used for achieving organizational capacity in the MEDL-CMC and on their intended role in reducing instructor workload in planning both classroom activities and research grant broader impacts.

Thin-walled reinforcement lattice structure for hollow CMC buckets

Science.gov (United States)

de Diego, Peter

2017-06-27

A hollow ceramic matrix composite (CMC) turbine bucket with an internal reinforcement lattice structure has improved vibration properties and stiffness. The lattice structure is formed of thin-walled plies made of CMC. The wall structures are arranged and located according to high stress areas within the hollow bucket. After the melt infiltration process, the mandrels melt away, leaving the wall structure to become the internal lattice reinforcement structure of the bucket.

Language Learning Going Global: Linking Teachers and Learners via Commercial Skype-Based CMC

Science.gov (United States)

Terhune, N. M.

2016-01-01

This paper reports on students' use of face-to-face synchronous computer-mediated communication (CMC) for oral language learning. It describes a university English language class designed to prepare students for overseas study in which a Skype-based English conversation school was piloted. The study offers analysis of how students used the CMC…

Radiation synthesis of superabsorbent CMC based hydrogels for agriculture applications

International Nuclear Information System (INIS)

Raafat, Amany I.; Eid, Mona; El-Arnaouty, Magda B.

2012-01-01

A series of superabsorbent hydrogel based on carboxymethylcellulose (CMC) and polyvinylpyrrolidone (PVP) crosslinked with gamma irradiation have been proposed for agriculture application. The effect of preparation conditions such as feed solution composition and absorbed irradiation dose on the gelation and swelling degree was evaluated. The structure and the morphology of the superabsorbent CMC/PVP hydrogel were characterized using Fourier transform infrared spectroscopy technique (FTIR), and scanning electron microscope (SEM). Effect of ionic strength and cationic and anionic kinds on the swelling behavior of the obtained hydrogel was investigated. Urea as an agrochemical model was loaded onto the obtained hydrogel to provide nitrogen (N) nutrients. The water retention capability and the urea release behavior of the CMC/PVP hydrogels were investigated. It was found that, the obtained CMC/PVP hydrogels have good swelling degree that greatly affected by its composition and absorbed dose. The swelling was also extremely sensitive to the ionic strength and cationic kind. Owing to its considerable slow urea release, good water retention capacity, being economical, and environment-friendly, it might be useful for its application in agriculture field.

Radiation synthesis of superabsorbent CMC based hydrogels for agriculture applications

Science.gov (United States)

Raafat, Amany I.; Eid, Mona; El-Arnaouty, Magda B.

2012-07-01

A series of superabsorbent hydrogel based on carboxymethylcellulose (CMC) and polyvinylpyrrolidone (PVP) crosslinked with gamma irradiation have been proposed for agriculture application. The effect of preparation conditions such as feed solution composition and absorbed irradiation dose on the gelation and swelling degree was evaluated. The structure and the morphology of the superabsorbent CMC/PVP hydrogel were characterized using Fourier transform infrared spectroscopy technique (FTIR), and scanning electron microscope (SEM). Effect of ionic strength and cationic and anionic kinds on the swelling behavior of the obtained hydrogel was investigated. Urea as an agrochemical model was loaded onto the obtained hydrogel to provide nitrogen (N) nutrients. The water retention capability and the urea release behavior of the CMC/PVP hydrogels were investigated. It was found that, the obtained CMC/PVP hydrogels have good swelling degree that greatly affected by its composition and absorbed dose. The swelling was also extremely sensitive to the ionic strength and cationic kind. Owing to its considerable slow urea release, good water retention capacity, being economical, and environment-friendly, it might be useful for its application in agriculture field.

Radiation synthesis of superabsorbent CMC based hydrogels for agriculture applications

Energy Technology Data Exchange (ETDEWEB)

Raafat, Amany I., E-mail: ismaelraafat_a@hotmail.com [Polymer Chemistry Department, National Center for Radiation Research and Technology, P.O. Box 29, Nasr City, Cairo (Egypt); Eid, Mona; El-Arnaouty, Magda B. [Polymer Chemistry Department, National Center for Radiation Research and Technology, P.O. Box 29, Nasr City, Cairo (Egypt)

2012-07-15

A series of superabsorbent hydrogel based on carboxymethylcellulose (CMC) and polyvinylpyrrolidone (PVP) crosslinked with gamma irradiation have been proposed for agriculture application. The effect of preparation conditions such as feed solution composition and absorbed irradiation dose on the gelation and swelling degree was evaluated. The structure and the morphology of the superabsorbent CMC/PVP hydrogel were characterized using Fourier transform infrared spectroscopy technique (FTIR), and scanning electron microscope (SEM). Effect of ionic strength and cationic and anionic kinds on the swelling behavior of the obtained hydrogel was investigated. Urea as an agrochemical model was loaded onto the obtained hydrogel to provide nitrogen (N) nutrients. The water retention capability and the urea release behavior of the CMC/PVP hydrogels were investigated. It was found that, the obtained CMC/PVP hydrogels have good swelling degree that greatly affected by its composition and absorbed dose. The swelling was also extremely sensitive to the ionic strength and cationic kind. Owing to its considerable slow urea release, good water retention capacity, being economical, and environment-friendly, it might be useful for its application in agriculture field.

PENGARUH PENAMBAHAN CMC SEBAGAI SENYAWA PENSTABIL TERHADAP YOGHURT TEPUNG GEMBILI

Directory of Open Access Journals (Sweden)

Dewi Cakrawati

2016-12-01

Full Text Available The study aims to determine the effect of CMC in preventing yoghurt separation in 7 days with the addition of 2% Dioscorea esculenta flour. Organoleptic test using quality hedonic was conducting to find out yoghurt with addition of CMC that had accepted characteristic by panelists. Research was carried out using regression method to determine the total titrated acid, pH and separation level of yoghurt during storage. The concentrations of CMC were added at 0.2%, 0.4%, 0.6%, 0.8%. The analysis showed the addition of 0.6% CMC showed the lowest separation with high viscosity grades of DPAs 40.25. Yoghurt storage for 7 days shows a graph of the pH value and total titrated acid were parabolic where increasing in total titrated acid value would lower the pH value. Yoghurt was damaged on the 7th day of storage at room temperature characterized by the increasing in the pH value and damage to the organoleptics properties, namely yoghurt flavor and aroma.

Preparation of crosslinked carboxymethylcellulose (CMC) by 60 Co γ-ray irradiation and its biodegradable properties

International Nuclear Information System (INIS)

Lim, Youn Mook; Lee, Joon Ho; Nho, Young Chang; Son, Tae Il

2007-01-01

Biodegradable and biocompatible carboxymethylcellulose (CMC) hydrogels for personal care products such as infants diapers and feminine hygiene products were prepared by a γ- irradiation crosslinking technique. Hydrogels were prepared as a function of the CMC concentration, total dose, and degree of substitution (DS), and their physical properties such as the gel fraction, swelling ratio, pH-responsibility and biodegradability were investigated. The irradiation of an aqueous CMC solution led to a gelation in an aqueous solution of more than 10 w%, and the gel percent increased as the CMC concentration, total dose and DS increased. The equilibrium swelling behaviors of the hydrogels prepared in various conditions were examined in an aqueous solution, and the pH-response at a pH of 1.2 and 6.8 was investigated. CMC hydrogels showed a high gelation at a high CMC concentration with DS 1.2. Lastly, the effects of the crosslinking degree of the CMC on the hydrolysis reaction were examined by cellulase from Trichoderma reseei. It was found that the degradable reaction depended on the degree of the crosslinking of the CMC. Intermolecular crosslinking reactions were confirmed by the ESR spectra

Lightweight, Ultra-High-Temperature, CMC-Lined Carbon/Carbon Structures

Science.gov (United States)

Wright, Matthew J.; Ramachandran, Gautham; Williams, Brian E.

2011-01-01

Carbon/carbon (C/C) is an established engineering material used extensively in aerospace. The beneficial properties of C/C include high strength, low density, and toughness. Its shortcoming is its limited usability at temperatures higher than the oxidation temperature of carbon . approximately 400 C. Ceramic matrix composites (CMCs) are used instead, but carry a weight penalty. Combining a thin laminate of CMC to a bulk structure of C/C retains all of the benefits of C/C with the high temperature oxidizing environment usability of CMCs. Ultramet demonstrated the feasibility of combining the light weight of C/C composites with the oxidation resistance of zirconium carbide (ZrC) and zirconium- silicon carbide (Zr-Si-C) CMCs in a unique system composed of a C/C primary structure with an integral CMC liner with temperature capability up to 4,200 F (.2,315 C). The system effectively bridged the gap in weight and performance between coated C/C and bulk CMCs. Fabrication was demonstrated through an innovative variant of Ultramet fs rapid, pressureless melt infiltration processing technology. The fully developed material system has strength that is comparable with that of C/C, lower density than Cf/SiC, and ultra-high-temperature oxidation stability. Application of the reinforced ceramic casing to a predominantly C/C structure creates a highly innovative material with the potential to achieve the long-sought goal of long-term, cyclic high-temperature use of C/C in an oxidizing environment. The C/C substructure provided most of the mechanical integrity, and the CMC strengths achieved appeared to be sufficient to allow the CMC to perform its primary function of protecting the C/C. Nozzle extension components were fabricated and successfully hot-fire tested. Test results showed good thermochemical and thermomechanical stability of the CMC, as well as excellent interfacial bonding between the CMC liner and the underlying C/C structure. In particular, hafnium-containing CMCs on

Preparation of CMC-modified melamine resin spherical nano-phase change energy storage materials.

Science.gov (United States)

Hu, Xiaofeng; Huang, Zhanhua; Zhang, Yanhua

2014-01-30

A novel carboxymethyl cellulose (CMC)-modified melamine-formaldehyde (MF) phase change capsule with excellent encapsulation was prepared by in situ polymerization. Effects of CMC on the properties of the capsules were studied by Fourier transformation infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electronic microscopy (SEM), X-ray diffractometry (XRD), and thermogravimetric analysis (TGA). The results showed that the CMC-modified capsules had an average diameter of about 50nm and good uniformity. The phase change enthalpy of the capsules was increased and the cracking ratio decreased by incorporating a suitable amount of CMC. The optimum phase change enthalpy of the nanocapsules was 83.46J/g, and their paraffin content was 63.1%. The heat resistance of the capsule shells decreased after CMC modification. In addition, the nanocapsule cracking ratio of the nanocapsules was 11.0%, which is highly attractive for their application as nano phase change materials. Copyright © 2013 Elsevier Ltd. All rights reserved.

Biodegradation of PVP-CMC hydrogel film: a useful food packaging material.

Science.gov (United States)

Roy, Niladri; Saha, Nabanita; Kitano, Takeshi; Saha, Petr

2012-06-20

Hydrogels can offer new opportunities for the design of efficient packaging materials with desirable properties (i.e. durability, biodegradability and mechanical strength). It is a promising and emerging concept, as most of the biopolymer based hydrogels are supposed to be biodegradable, they can be considered as alternative eco-friendly packaging materials. This article reports about synthetic (polyvinylpyrrolidone (PVP)) and biopolymer (carboxymethyl cellulose (CMC)) based a novel hydrogel film and its nature of biodegradability under controlled environmental condition. The dry hydrogel films were prepared by solution casting method and designated as 'PVP-CMC hydrogel films'. The hydrogel film containing PVP and CMC in a ratio of 20:80 shows best mechanical properties among all the test samples (i.e. 10:90, 20:80, 50:50, 80:20 and 90:10). Thus, PVP-CMC hydrogel film of 20:80 was considered as a useful food packaging material and further experiments were carried out with this particular hydrogel film. Biodegradation of the PVP-CMC hydrogel films were studied in liquid state (Czapec-Dox liquid medium+soil extracts) until 8 weeks. Variation in mechanical, viscoelastic properties and weight loss of the hydrogel films with time provide the direct evidence of biodegradation of the hydrogels. About 38% weight loss was observed within 8 weeks. FTIR spectra of the hydrogel films (before and after biodegradation) show shifts of the peaks and also change in the peak intensities, which refer to the physico-chemical change in the hydrogel structure and SEM views of the hydrogels show how internal structure of the PVP-CMC film changes in the course of biodegradation. Copyright © 2012 Elsevier Ltd. All rights reserved.

A LES-CMC formulation for premixed flames including differential diffusion

Science.gov (United States)

Farrace, Daniele; Chung, Kyoungseoun; Bolla, Michele; Wright, Yuri M.; Boulouchos, Konstantinos; Mastorakos, Epaminondas

2018-05-01

A finite volume large eddy simulation-conditional moment closure (LES-CMC) numerical framework for premixed combustion developed in a previous studyhas been extended to account for differential diffusion. The non-unity Lewis number CMC transport equation has an additional convective term in sample space proportional to the conditional diffusion of the progress variable, that in turn accounts for diffusion normal to the flame front and curvature-induced effects. Planar laminar simulations are first performed using a spatially homogeneous non-unity Lewis number CMC formulation and validated against physical-space fully resolved reference solutions. The same CMC formulation is subsequently used to numerically investigate the effects of curvature for laminar flames having different effective Lewis numbers: a lean methane-air flame with Leeff = 0.99 and a lean hydrogen-air flame with Leeff = 0.33. Results suggest that curvature does not affect the conditional heat release if the effective Lewis number tends to unity, so that curvature-induced transport may be neglected. Finally, the effect of turbulence on the flame structure is qualitatively analysed using LES-CMC simulations with and without differential diffusion for a turbulent premixed bluff body methane-air flame exhibiting local extinction behaviour. Overall, both the unity and the non-unity computations predict the characteristic M-shaped flame observed experimentally, although some minor differences are identified. The findings suggest that for the high Karlovitz number (from 1 to 10) flame considered, turbulent mixing within the flame weakens the differential transport contribution by reducing the conditional scalar dissipation rate and accordingly the conditional diffusion of the progress variable.

Preparation of crosslinked carboxymethylcellulose (CMC) by {sup 60} Co γ-ray irradiation and its biodegradable properties

Energy Technology Data Exchange (ETDEWEB)

Lim, Youn Mook; Lee, Joon Ho; Nho, Young Chang [Radiation Research Center for Industry and Environment, Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of); Son, Tae Il [Dept. of Biotechnology, College of Industrial Science, Graduate School, Chung Ang University, Seoul (Korea, Republic of)

2007-05-15

Biodegradable and biocompatible carboxymethylcellulose (CMC) hydrogels for personal care products such as infants diapers and feminine hygiene products were prepared by a γ- irradiation crosslinking technique. Hydrogels were prepared as a function of the CMC concentration, total dose, and degree of substitution (DS), and their physical properties such as the gel fraction, swelling ratio, pH-responsibility and biodegradability were investigated. The irradiation of an aqueous CMC solution led to a gelation in an aqueous solution of more than 10 w%, and the gel percent increased as the CMC concentration, total dose and DS increased. The equilibrium swelling behaviors of the hydrogels prepared in various conditions were examined in an aqueous solution, and the pH-response at a pH of 1.2 and 6.8 was investigated. CMC hydrogels showed a high gelation at a high CMC concentration with DS 1.2. Lastly, the effects of the crosslinking degree of the CMC on the hydrolysis reaction were examined by cellulase from Trichoderma reseei. It was found that the degradable reaction depended on the degree of the crosslinking of the CMC. Intermolecular crosslinking reactions were confirmed by the ESR spectra.

CHARACTERIZATION OF CARBOXY METHYL CELLULOSE (CMC FROM Eichornia crassipes (Mart Solms

Directory of Open Access Journals (Sweden)

Arum Wijayani

2010-06-01

Full Text Available Carboxy Methyl Cellulose (CMC, a compound made made of eceng gondok has been implied for its characteristic by a constructive wet system, with media such as methanol, propanol and water. Four consecutive phases involving alkalization, carboxymethylization, neutralization and drainage were used in the making process of CMC. The first two process were prepared by reacting NaOH and ClCH2COONa with NaOH 22; 32.5; 39.2; 45.9 g and 20; 26; 32; 38 g ClCH2COONa respectively. Added acetic acid was used in the neutralization process, whilst drainage only involved heating in the oven. The overall result for each characteristic substitution degree, acidity; viscosity; contens of water consentration of NaCl and purity 0.4 - 0.85, 6.10 - 8.49, 3 - 10 cP, 3.57 - 19.4 %, 12.9 - 22.4 % and 77.96 - 87.09 % respectively. Based on the obtained characteristic, could be concluded that CMC is considered as a technical quality and can also be used as filler constituent in adhesive. Keywords: CMC, alkalization, carboxymethylization

Statistical applications for chemistry, manufacturing and controls (CMC) in the pharmaceutical industry

CERN Document Server

Burdick, Richard K; Pfahler, Lori B; Quiroz, Jorge; Sidor, Leslie; Vukovinsky, Kimberly; Zhang, Lanju

2017-01-01

This book examines statistical techniques that are critically important to Chemistry, Manufacturing, and Control (CMC) activities. Statistical methods are presented with a focus on applications unique to the CMC in the pharmaceutical industry. The target audience consists of statisticians and other scientists who are responsible for performing statistical analyses within a CMC environment. Basic statistical concepts are addressed in Chapter 2 followed by applications to specific topics related to development and manufacturing. The mathematical level assumes an elementary understanding of statistical methods. The ability to use Excel or statistical packages such as Minitab, JMP, SAS, or R will provide more value to the reader. The motivation for this book came from an American Association of Pharmaceutical Scientists (AAPS) short course on statistical methods applied to CMC applications presented by four of the authors. One of the course participants asked us for a good reference book, and the only book recomm...

CMC vane assembly apparatus and method

Science.gov (United States)

Schiavo, Anthony L; Gonzalez, Malberto F; Huang, Kuangwei; Radonovich, David C

2012-10-23

A metal vane core or strut (64) is formed integrally with an outer backing plate (40). An inner backing plate (38) is formed separately. A spring (74) with holes (75) is installed in a peripheral spring chamber (76) on the strut. Inner and outer CMC shroud covers (46, 48) are formed, cured, then attached to facing surfaces of the inner and outer backing plates (38, 40). A CMC vane airfoil (22) is formed, cured, and slid over the strut (64). The spring (74) urges continuous contact between the strut (64) and airfoil (66), eliminating vibrations while allowing differential expansion. The inner end (88) of the strut is fastened to the inner backing plate (38). A cooling channel (68) in the strut is connected by holes (69) along the leading edge of the strut to peripheral cooling paths (70, 71) around the strut. Coolant flows through and around the strut, including through the spring holes.

The dynamic magnetoviscoelastic properties of biomineralized (Fe3O4) PVP-CMC hydrogel

Science.gov (United States)

Ray, Ayan; Saha, Nabanita; Saha, Petr

2017-05-01

The Polyvinylpyrrolidone (PVP) and carboxymethylcellulose (CMC) based polymer matrix was used as a template for the preparation of magnetic hydrogel. This freshly prepared PVP-CMC hydrogel template was successfully mineralized by in situ synthesis of magnetic nanoparticles (Fe3O4) via chemical co-precipitation reaction using liquid diffusion method. The present study emphasizes on the rheological behavior of non-mineralized and mineralized PVP-CMC hydrogels. Scanning Electron Microscopy (SEM), transmission electron microscopy (TEM), X-ray Diffraction (XRD) pattern, Fourier transform infrared spectroscopy (FT-TR), Vibrating sample magnetometer (VSM) and dynamic magneto rheometer were used to study the morphological, physical, chemical and magnetic properties of nanoparticle (Fe3O4) filled PVP-CMC hydrogel respectively in order to monitor how Fe3O4 magnetic nanoparticles affects the mechanical properties of the hydrogel network. The storage (G') and loss (G") moduli with a complex viscosity of the system was measured using a parallel plate rheometer. Frequency and amplitude sweep with temperature variation was performed to determine the frequency and amplitude dependent magneto viscoelastic moduli for both hydrogel samples. A strong shear thinning effect was observed in both (non-mineralized and mineralized) PVP-CMC hydrogels, which confirm that Fe3O4 filled magnetic hydrogels, are pseudoplastic in nature. This Fe3O4 filled PVP-CMC hydrogel can be considered as stimuli-responsive soft matter that may be used as an actuator in medical devices.

Synthesis and characterization of carboxymethyl cellulose from office waste paper: A greener approach towards waste management

International Nuclear Information System (INIS)

Joshi, Gyanesh; Naithani, Sanjay; Varshney, V.K.; Bisht, Surendra S.; Rana, Vikas; Gupta, P.K.

2015-01-01

Highlights: • Carboxymethyl cellulose (CMC) was successfully prepared from waste paper. • CMC had maximum degree of substitution (DS) 1.07. • Rheological studies of CMC (DS, 1.07) showed non-Newtonian pseudoplastic behavior. • Characterization of CMC was done by FT-IR and NMR techniques. • Morphology of prepared CMC was studied by SEM. - Abstract: In the present study, functionalization of mixed office waste (MOW) paper has been carried out to synthesize carboxymethyl cellulose, a most widely used product for various applications. MOW was pulped and deinked prior to carboxymethylation. The deinked pulp yield was 80.62 ± 2.0% with 72.30 ± 1.50% deinkability factor. The deinked pulp was converted to CMC by alkalization followed by etherification using NaOH and ClCH 2 COONa respectively, in an alcoholic medium. Maximum degree of substitution (DS) (1.07) of prepared CMC was achieved at 50 °C with 0.094 M and 0.108 M concentrations of NaOH and ClCH 2 COONa respectively for 3 h reaction time. The rheological characteristics of 1–3% aqueous solution of optimized CMC product showed the non-Newtonian pseudoplastic behavior. Fourier transform infra red (FTIR), nuclear magnetic resonance (NMR) and scanning electron microscope (SEM) study were used to characterize the CMC product

Ceramic Matrix Composite (CMC) Thermal Protection Systems (TPS) and Hot Structures for Hypersonic Vehicles

Science.gov (United States)

Glass, David E.

2008-01-01

Thermal protection systems (TPS) and hot structures are required for a range of hypersonic vehicles ranging from ballistic reentry to hypersonic cruise vehicles, both within Earth's atmosphere and non-Earth atmospheres. The focus of this paper is on air breathing hypersonic vehicles in the Earth's atmosphere. This includes single-stage to orbit (SSTO), two-stage to orbit (TSTO) accelerators, access to space vehicles, and hypersonic cruise vehicles. This paper will start out with a brief discussion of aerodynamic heating and thermal management techniques to address the high heating, followed by an overview of TPS for rocket-launched and air-breathing vehicles. The argument is presented that as we move from rocket-based vehicles to air-breathing vehicles, we need to move away from the insulated airplane approach used on the Space Shuttle Orbiter to a wide range of TPS and hot structure approaches. The primary portion of the paper will discuss issues and design options for CMC TPS and hot structure components, including leading edges, acreage TPS, and control surfaces. The current state-of-the-art will be briefly discussed for some of the components. The two primary technical challenges impacting the use of CMC TPS and hot structures for hypersonic vehicles are environmental durability and fabrication, and will be discussed briefly.

Study of induced cross-linking by ionizing radiation of polyvinylpyrrolidone (PVP)/carboxymethylcellulose (CMC)

International Nuclear Information System (INIS)

Alcantara, Mara T.S.; Chirinos, Hugo; Amaral, Renata H.; Rogero, Sizue O.; Lugao, Ademar B.

2005-01-01

The polymeric hydrogels are materials with capacity to absorb great amount of water. They present interesting characteristics for many applications in the industry and as biomaterials. The hydrogel membrane with PVP, poly ethylene glycol and agar, crosslinked and sterilized simultaneously by radiation was introduced in the European market and now it is reaching other regions. In this work the hydrogel studied was synthesized with PVP and CMC and crosslinked by gamma radiation. It was applied factorial planning methodology using the gel fraction as basic parameter. Antagonistic interaction was observed between PVP and CMC. High concentrations of PVP help the crosslinking and the opposite with CMC. On the other hand, for low concentrations of PVP the dose influences considerable the gel fraction what it does not happen for high concentrations. From these results it was made an analysis of response surface allowing the optimization of the concentrations of the variables PVP and CMC. (author)

Synthesis and characterization of carboxymethyl cellulose from office waste paper: A greener approach towards waste management

Energy Technology Data Exchange (ETDEWEB)

Joshi, Gyanesh, E-mail: joshig@icfre.org [Cellulose and Paper Division, Forest Research Institute, Dehradun 248006 (India); Naithani, Sanjay [Chemistry of Forest Products Division, Institute of Wood Science & Technology, Bangalore 560003 (India); Varshney, V.K. [Chemistry Division, Forest Research Institute, Dehradun 248006 (India); Bisht, Surendra S. [Chemistry of Forest Products Division, Institute of Wood Science & Technology, Bangalore 560003 (India); Rana, Vikas; Gupta, P.K. [Cellulose and Paper Division, Forest Research Institute, Dehradun 248006 (India)

2015-04-15

Highlights: • Carboxymethyl cellulose (CMC) was successfully prepared from waste paper. • CMC had maximum degree of substitution (DS) 1.07. • Rheological studies of CMC (DS, 1.07) showed non-Newtonian pseudoplastic behavior. • Characterization of CMC was done by FT-IR and NMR techniques. • Morphology of prepared CMC was studied by SEM. - Abstract: In the present study, functionalization of mixed office waste (MOW) paper has been carried out to synthesize carboxymethyl cellulose, a most widely used product for various applications. MOW was pulped and deinked prior to carboxymethylation. The deinked pulp yield was 80.62 ± 2.0% with 72.30 ± 1.50% deinkability factor. The deinked pulp was converted to CMC by alkalization followed by etherification using NaOH and ClCH{sub 2}COONa respectively, in an alcoholic medium. Maximum degree of substitution (DS) (1.07) of prepared CMC was achieved at 50 °C with 0.094 M and 0.108 M concentrations of NaOH and ClCH{sub 2}COONa respectively for 3 h reaction time. The rheological characteristics of 1–3% aqueous solution of optimized CMC product showed the non-Newtonian pseudoplastic behavior. Fourier transform infra red (FTIR), nuclear magnetic resonance (NMR) and scanning electron microscope (SEM) study were used to characterize the CMC product.

Computer-Mediated Communication (CMC) in L2 Oral Proficiency Development: A Meta-Analysis

Science.gov (United States)

Lin, Huifen

2015-01-01

The ever growing interest in the development of foreign or second (L2) oral proficiency in a computer-mediated communication (CMC) classroom has resulted in a large body of studies looking at both the direct and indirect effects of CMC interventions on the acquisition of oral competences. The present study employed a quantitative meta-analytic…

Study on novel functional materials carboxymethyl cellulose lithium (CMC-Li) improve high-performance lithium-ion battery.

Science.gov (United States)

Qiu, Lei; Shao, Ziqiang; Xiang, Pan; Wang, Daxiong; Zhou, Zhenwen; Wang, Feijun; Wang, Wenjun; Wang, Jianquan

2014-09-22

Novel cellulose derivative CMC-Li was synthesized by cotton as raw material. The mechanism of the CMC-Li modified electrode materials by electrospinning was reported. CMC-Li/lithium iron phosphate (LiFePO4, LFP) composite fiber coated with LFP and CMC-Li nanofibers was successfully obtained by electrospinning. Then, CMC-Li/LFP nano-composite fiber was carbonized under nitrogen at a high temperature formed CNF/LFP/Li (CLL) composite nanofibers as cathode material. It can increase the contents of Li+, and improving the diffusion efficiency and specific capacity. The battery with CLL as cathode material retained close to 100% of initial reversible capacity after 200 cycles at 168 mAh g(-1), which was nearly the theoretical specific capacity of LFP. The cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), X-ray diffraction (XRD) and scanning electron microscope (SEM) were characterizing material performance. The batteries have good electrochemical property, outstanding pollution-free, excellent stability. Copyright © 2014 Elsevier Ltd. All rights reserved.

Development of a Hydrogen Uptake-Release Mg-Based Alloy by Adding a Polymer CMC (Carboxymethylcellulose, Sodium Salt) via Reaction-Accompanying Milling

Science.gov (United States)

Kwak, Young Jun; Choi, Eunho; Song, Myoung Youp

2018-03-01

The addition of carboxymethylcellulose, sodium salt (CMC) might improve the hydrogen uptake and release properties of Mg since it has a relatively low melting point and the melting of CMC during milling in hydrogen (reaction-accompanying milling) may make the milled samples be in good states to absorb and release hydrogen rapidly and to have a large hydrogen-storage capacity. Samples with compositions of 95 w/o Mg + 5 w/o CMC (named Mg-5CMC) and 90 w/o Mg + 10 w/o CMC (named Mg-10CMC) were prepared by adding CMC via reaction-accompanying milling. Activation of Mg-10CMC was completed after about 3 hydrogen uptake-release cycles. Mg-10CMC had a higher initial hydrogen uptake rate and a larger amount of hydrogen absorbed in 60 min, U (60 min), than Mg-5CMC before and after activation. At the cycle number of three (CN = 3), Mg-10CMC had a very high initial hydrogen uptake rate (1.56 w/o H/min) and a large U (60 min) (5.57 w/o H) at 593 K in hydrogen of 12 bar, showing that the activated Mg-10CMC has an effective hydrogen-storage capacity of about 5.6 w/o at 593 K in hydrogen of 12 bar at CN = 3. At CN = 2, Mg-10CMC released 1.00 w/o H in 2.5 min, 4.67 w/o H in 10 min, and 4.76 w/o H in 60 min at 648 K in hydrogen of 1.0 bar. The milling in hydrogen of Mg with CMC is believed to generate imperfections and cracks and reduce the particle size. The addition of 10 w/o CMC was more effective on the initial hydrogen uptake rate and U (60 min) compared with the 10 w/o additions of NbF5, TaF5, Fe2O3, and MnO, and the 10 w/o simultaneous addition of Ni, Fe, and Ti. To the best of our knowledge, this study is the first in which a polymer CMC is added to Mg by reaction-accompanying milling to improve the hydrogen storage properties of Mg.

Gradient Interphase, 3-D Fiber Architecture CMC's, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — A clear need exists for the next generation of Ceramic Matrix Composites (CMC) for Thermal Protection Systems (TPS), propulsion hardware, and other high temperature...

Oxide_Oxide Ceramic Matrix Composite (CMC) Exhaust Mixer Development in the NASA Environmentally Responsible Aviation (ERA) Project

Science.gov (United States)

Kiser, J. Douglas; Bansal, Narottam P.; Szelagowski, James; Sokhey, Jagdish; Heffernan, Tab; Clegg, Joseph; Pierluissi, Anthony; Riedell, Jim; Wyen, Travis; Atmur, Steven;

Improvement of Fish Sauce Quality by Strain CMC5-3-1: A Novel Species of Staphylococcus sp.

Science.gov (United States)

Udomsil, Natteewan; Rodtong, Sureelak; Tanasupawat, Somboon; Yongsawatdigul, Jirawat

2015-09-01

Staphylococcus sp. CMC5-3-1 and CMS5-7-5 isolated from fermented fish sauce at 3 to 7 mo, respectively, showed different characteristics on protein hydrolysis and volatile formation. These Gram-positive cocci were able to grow in up to 15% NaCl with the optimum at 0.5% to 5% NaCl in tryptic soy broth. Based on ribosomal 16S rRNA gene sequences, Staphylococcus sp. CMC5-3-1 and CMS5-7-5 showed 99.0% similarity to that of Staphylococcus piscifermentans JCM 6057(T) , but DNA-DNA relatedness was sauce inoculated with Staphylococcus sp. CMC5-3-1 was 740.5 mM, which was higher than that inoculated by the strain CMS5-7-5 (662.14 mM, P sauce inoculated with Staphylococcus sp. CMC5-3-1 showed the highest content of total glutamic acid (P sauce inoculated with Staphylococcus sp. CMC5-3-1 was 2-methypropanal, contributing to the desirable dark chocolate note. Staphylococcus sp. CMC5-3-1 could be applied as a starter culture to improve the umami and aroma of fish sauce. © 2015 Institute of Food Technologists®

Overview of CMC (Ceramic Matrix Composite) Research at the NASA Glenn Research Center

Science.gov (United States)

Kiser, J. Douglas; Grady, Joseph E.; Bhatt, Ramakrishna T.; Wiesner, Valerie L.; Zhu, Dongming

2016-01-01

In support of NASAs Aeronautics Research Mission, the Glenn Research Center has developed and assessed various constituents for a high temperature (2700F) SiCSiC CMC system for turbine engine applications. Combinations of highly creep-resistant SiC fibers, advanced 3D weaves, durable environmental barrier coatings (EBCs), and a 2700F-capable hybrid SiC matrix are being developed evaluated. The resulting improvements in CMC mechanical properties and durability will be summarized. The development and validation of models for predicting the effects of the environment on the durability of CMCs and EBCs and other operating-environment challenges including the effect of CMAS (calcium magnesium aluminosilicate) degradation of EBCs will be discussed. Progress toward the development of CMC joining technology for 2400F joint applications will also be reviewed.

Turbine Airfoil With CMC Leading-Edge Concept Tested Under Simulated Gas Turbine Conditions

Science.gov (United States)

Robinson, R. Craig; Hatton, Kenneth S.

2000-01-01

Silicon-based ceramics have been proposed as component materials for gas turbine engine hot-sections. When the Navy s Harrier fighter experienced engine (Pegasus F402) failure because of leading-edge durability problems on the second-stage high-pressure turbine vane, the Office of Naval Research came to the NASA Glenn Research Center at Lewis Field for test support in evaluating a concept for eliminating the vane-edge degradation. The High Pressure Burner Rig (HPBR) was selected for testing since it could provide temperature, pressure, velocity, and combustion gas compositions that closely simulate the engine environment. The study focused on equipping the stationary metal airfoil (Pegasus F402) with a ceramic matrix composite (CMC) leading-edge insert and evaluating the feasibility and benefits of such a configuration. The test exposed the component, with and without the CMC insert, to the harsh engine environment in an unloaded condition, with cooling to provide temperature relief to the metal blade underneath. The insert was made using an AlliedSignal Composites, Inc., enhanced HiNicalon (Nippon Carbon Co. LTD., Yokohama, Japan) fiber-reinforced silicon carbide composite (SiC/SiC CMC) material fabricated via chemical vapor infiltration. This insert was 45-mils thick and occupied a recessed area in the leading edge and shroud of the vane. It was designed to be free floating with an end cap design. The HPBR tests provided a comparative evaluation of the temperature response and leading-edge durability and included cycling the airfoils between simulated idle, lift, and cruise flight conditions. In addition, the airfoils were aircooled, uniquely instrumented, and exposed to the exact set of internal and external conditions, which included gas temperatures in excess of 1370 C (2500 F). In addition to documenting the temperature response of the metal vane for comparison with the CMC, a demonstration of improved leading-edge durability was a primary goal. First, the

It's Just a Game, Right? Types of Play in Foreign Language CMC

OpenAIRE

Chantelle N. Warner

2004-01-01

This study focuses on the various playful uses of language that occurred during a semester-long study of two German language courses using one type of synchronous network-based medium, the MOO. Research and use of synchronous computer-mediated communication (CMC) have flourished in the study of second-language acquisition (SLA) since the late 1990s; however, the primary focus has been on the potential benefits of using CMC to increase the amount of communication (Beauvois, 1997; Kern, 1995; W...

SiC-CMC-Zircaloy-4 Nuclear Fuel Cladding Performance during 4-Point Tubular Bend Testing

Energy Technology Data Exchange (ETDEWEB)

IJ van Rooyen; WR Lloyd; TL Trowbridge; SR Novascone; KM Wendt; SM Bragg-Sitton

2013-09-01

The U.S. Department of Energy Office of Nuclear Energy (DOE NE) established the Light Water Reactor Sustainability (LWRS) program to develop technologies and other solutions to improve the reliability, sustain the safety, and extend the life of current reactors. The Advanced LWR Nuclear Fuel Development Pathway in the LWRS program encompasses strategic research focused on improving reactor core economics and safety margins through the development of an advanced fuel cladding system. Recent investigations of potential options for “accident tolerant” nuclear fuel systems point to the potential benefits of silicon carbide (SiC) cladding. One of the proposed SiC-based fuel cladding designs being investigated incorporates a SiC ceramic matrix composite (CMC) as a structural material supplementing an internal Zircaloy-4 (Zr-4) liner tube, referred to as the hybrid clad design. Characterization of the advanced cladding designs will include a number of out-of-pile (nonnuclear) tests, followed by in-pile irradiation testing of the most promising designs. One of the out-of-pile characterization tests provides measurement of the mechanical properties of the cladding tube using four point bend testing. Although the material properties of the different subsystems (materials) will be determined separately, in this paper we present results of 4-point bending tests performed on fully assembled hybrid cladding tube mock-ups, an assembled Zr-4 cladding tube mock-up as a standard and initial testing results on bare SiC-CMC sleeves to assist in defining design parameters. The hybrid mock-up samples incorporated SiC-CMC sleeves fabricated with 7 polymer impregnation and pyrolysis (PIP) cycles. To provide comparative information; both 1- and 2-ply braided SiC-CMC sleeves were used in this development study. Preliminary stress simulations were performed using the BISON nuclear fuel performance code to show the stress distribution differences for varying lengths between loading points

Ni(0-CMC-Na Nickel Colloids in Sodium Carboxymethyl-Cellulose: Catalytic Evaluation in Hydrogenation Reactions

Directory of Open Access Journals (Sweden)

Abdallah Karim

2011-01-01

Full Text Available A recyclable catalyst, Ni(0-CMC-Na, composed of nickel colloids dispersed in a water soluble bioorganic polymer, sodium carboxymethylcellulose (CMC-Na, was synthesized by a simple procedure from readily available reagents. The catalyst thus obtained is stable and highly active in alkene hydrogenations.

Microwave assisted in situ synthesis of Ag–NaCMC films and their reproducible surface-enhanced Raman scattering signals

International Nuclear Information System (INIS)

Jiang, Tao; Li, Junpeng; Zhang, Li; Wang, Binbing; Zhou, Jun

2014-01-01

Graphical abstract: Two kinds of Ag–NaCMC films for surface-enhanced Raman scattering (SERS) were prepared by conventional heating and microwave assisted in situ reduction methods without any additional capping or reducing agents. A relatively narrow and symmetric surface plasmon resonance band was observed in the absorption spectra of the films fabricated by the microwave assisted in situ reduction method. More uniform silver nanoparticles (NPs) implied by the symmetric absorption spectrum were further confirmed by the scanning electron microscopy images. After the simulation of the E-field intensity distribution around the silver NPs in NaCMC film, the Raman scattering enhancement factors (EFs) of these films were then investigated with 4-mercaptobenzoic acid molecule as a SERS reporter. Improved reproducibility of SERS signal was obtained in the microwave assisted synthesized Ag–NaCMC film, although it maintained an EF as only 1.11 × 10 8 . The reproducible SERS signal of the Ag–NaCMC film is particularly attractive and this microwave assisted in situ reduction method is suitable for the production of excellent substrate for biosensor application. - Highlights: • The synthesis of Ag–NaCMC films was successfully fulfilled by a low-cost microwave method. • More uniform silver nanoparticles were observed in Ag–NaCMC film synthesized by microwave. • Improved reproducibility of SERS signal was obtained in microwave synthesized Ag–NaCMC film. - Abstract: Two kinds of Ag–NaCMC films for surface-enhanced Raman scattering (SERS) were prepared by conventional heating and microwave assisted in situ reduction methods without any additional capping or reducing agents. A relatively narrow and symmetric surface plasmon resonance band was observed in the absorption spectra of the films fabricated by the microwave assisted in situ reduction method. More uniform silver nanoparticles (NPs) implied by the symmetric absorption spectrum were further confirmed by

Cooperative Monitoring Center Occasional Paper/13: Cooperative monitoring for confidence building: A case study of the Sino-Indian border areas

Energy Technology Data Exchange (ETDEWEB)

SIDHU,WAHEGURU PAL SINGH; YUAN,JING-DONG; BIRINGER,KENT L.

1999-08-01

This occasional paper identifies applicable cooperative monitoring techniques and develops models for possible application in the context of the border between China and India. The 1993 and 1996 Sino-Indian agreements on maintaining peace and tranquility along the Line of Actual Control (LAC) and establishing certain confidence building measures (CBMs), including force reductions and limitation on military exercises along their common border, are used to examine the application of technically based cooperative monitoring in both strengthening the existing terms of the agreements and also enhancing trust. The paper also aims to further the understanding of how and under what conditions technology-based tools can assist in implementing existing agreements on arms control and confidence building. The authors explore how cooperative monitoring techniques can facilitate effective implementation of arms control agreements and CBMS between states and contribute to greater security and stability in bilateral, regional, and global contexts.

Non-CMC Solutions of the Einstein Constraint Equations on Compact Manifolds with Apparent Horizon Boundaries

Science.gov (United States)

Holst, Michael; Meier, Caleb; Tsogtgerel, G.

2018-01-01

In this article we continue our effort to do a systematic development of the solution theory for conformal formulations of the Einstein constraint equations on compact manifolds with boundary. By building in a natural way on our recent work in Holst and Tsogtgerel (Class Quantum Gravity 30:205011, 2013), and Holst et al. (Phys Rev Lett 100(16):161101, 2008, Commun Math Phys 288(2):547-613, 2009), and also on the work of Maxwell (J Hyperbolic Differ Eqs 2(2):521-546, 2005a, Commun Math Phys 253(3):561-583, 2005b, Math Res Lett 16(4):627-645, 2009) and Dain (Class Quantum Gravity 21(2):555-573, 2004), under reasonable assumptions on the data we prove existence of both near- and far-from-constant mean curvature (CMC) solutions for a class of Robin boundary conditions commonly used in the literature for modeling black holes, with a third existence result for CMC appearing as a special case. Dain and Maxwell addressed initial data engineering for space-times that evolve to contain black holes, determining solutions to the conformal formulation on an asymptotically Euclidean manifold in the CMC setting, with interior boundary conditions representing excised interior black hole regions. Holst and Tsogtgerel compiled the interior boundary results covered by Dain and Maxwell, and then developed general interior conditions to model the apparent horizon boundary conditions of Dainand Maxwell for compact manifolds with boundary, and subsequently proved existence of solutions to the Lichnerowicz equation on compact manifolds with such boundary conditions. This paper picks up where Holst and Tsogtgerel left off, addressing the general non-CMC case for compact manifolds with boundary. As in our previous articles, our focus here is again on low regularity data and on the interaction between different types of boundary conditions. While our work here serves primarily to extend the solution theory for the compact with boundary case, we also develop several technical tools that have

Presentation on the Modeling and Educational Demonstrations Laboratory Curriculum Materials Center (MEDL-CMC): A Working Model and Progress Report

Science.gov (United States)

Glesener, G. B.; Vican, L.

2015-12-01

Physical analog models and demonstrations can be effective educational tools for helping instructors teach abstract concepts in the Earth, planetary, and space sciences. Reducing the learning challenges for students using physical analog models and demonstrations, however, can often increase instructors' workload and budget because the cost and time needed to produce and maintain such curriculum materials is substantial. First, this presentation describes a working model for the Modeling and Educational Demonstrations Laboratory Curriculum Materials Center (MEDL-CMC) to support instructors' use of physical analog models and demonstrations in the science classroom. The working model is based on a combination of instructional resource models developed by the Association of College & Research Libraries and by the Physics Instructional Resource Association. The MEDL-CMC aims to make the curriculum materials available for all science courses and outreach programs within the institution where the MEDL-CMC resides. The sustainability and value of the MEDL-CMC comes from its ability to provide and maintain a variety of physical analog models and demonstrations in a wide range of science disciplines. Second, the presentation then reports on the development, progress, and future of the MEDL-CMC at the University of California Los Angeles (UCLA). Development of the UCLA MEDL-CMC was funded by a grant from UCLA's Office of Instructional Development and is supported by the Department of Earth, Planetary, and Space Sciences. Other UCLA science departments have recently shown interest in the UCLA MEDL-CMC services, and therefore, preparations are currently underway to increase our capacity for providing interdepartmental service. The presentation concludes with recommendations and suggestions for other institutions that wish to start their own MEDL-CMC in order to increase educational effectiveness and decrease instructor workload. We welcome an interuniversity collaboration to

Effect of CMC and arabic gum in the manufacture of jackfruit velva (Artocarpus heterophyllus)

Science.gov (United States)

Yudhistira, B.; Riyadi, N. H.; Pangestika, A. D.; Pertiwi, S. R.

2018-03-01

Velva is one type of frozen dessert which is made from fruit/vegetable with ice cream maker, low fat and high fiber content. Jackfruit is a raw material for the manufacture of velva because of the high fiber content of 2.31 gr. The use of a stabilizers combination of CMC and arabic gum in the manufacture of velva will provide a better gel mix than single use. The purpose of this research is to know the influence of variation of CMC and arabic gum stabilizer on the characteristics (physical, chemical, and sensory) of jackfruit velva (Artocarpus heterophyllus) and determine variations in the most appropriate combinations of stabilizers to produce jackfruit velva with the best quality. This research applied Completely Randomized Design consist of one factor which is the combination of CMC and arabic gum levels in the making of jackfruit velva with two replicates and two replications of the analysis. The data obtained then analyzed statistically using one way analysis of variance (ANOVA), when there is a significant difference, then followed by Duncan’s Multiple Range Test (DMRT) at significance level of 0.05. The results of this study concluded that the jackfruit velva with the addition of various concentrations of CMC and arabic gum is significantly affecting the taste, texture and overall parameters, but no significant difference on the color and flavor parameters of jackfruit velva. Based on the results of physical characteristics, chemical and sensory jackfruit velva with the addition of a stabilizing concentration of CMC and arabic gum 1: 1 result in best jackfruit velva. The best jackfruit velva with stabilizing the concentration of CMC and arabic gum 1: 1 contains a water content of 61.95%, dietary fiber 2.231%, total dissolved solids 20.38 °Brix, overrun 19.709%, meltdown 28.215 minutes. As for the color attribute score 3.72; Taste 4; flavor 3.60; Texture 3.68, and overall 3.88.

CMC-coated Fe3O4 nanoparticles as new MRI probes for hepatocellular carcinoma

International Nuclear Information System (INIS)

Sitthichai, Sudarat; Pilapong, Chalermchai; Thongtem, Titipun; Thongtem, Somchai

2015-01-01

Highlights: • Fe 3 O 4 nanoparticles (NPs) are superparamagnetic. • CMC is water-soluble and nontoxic cellulose-derivative polymer. • CMC-coated Fe 3 O 4 NPs were successfully prepared by co-precipitation method. • The promising NPs that can be used for magnetic resonance imaging application. - Abstract: Pure Fe 3 O 4 nanoparticles and Fe 3 O 4 magnetic nanoparticles (MNPs) coated with carboxymethyl cellulose (CMC) were successfully prepared by co-precipitating of FeCl 2 ·4H 2 O and FeCl 3 ·6H 2 O in the solutions containing ammonia at 80 °C for 3 h. Phase, morphology, particle-sized distribution, surface chemistry, and weight loss were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) including high-resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED), thermogravimetric analysis (TGA), and Fourier transform infrared (FTIR) spectroscopy. In this research, CMC-coated Fe 3 O 4 MNPs consisting of Fe 2+ and Fe 3+ ions with 543.3-mM −1 s −1 high relaxivity were detected and were able to be used for magnetic resonance imaging (MRI) application with very good contrast for targeting hepatocellular carcinoma (HCC) without any further vectorization.

Influence of PVA and CMC on the Properties of Pigment Coating Colors and their Effects on Curtain Stability

Directory of Open Access Journals (Sweden)

Eun Heui Choi

2015-09-01

Full Text Available The influence of polyvinyl alcohol (PVA and carboxymethyl cellulose (CMC on the properties of ground calcium carbonate (GCC and clay coating colors, as well as its effect on curtain stability during the coating process was investigated. Based on the experimental results of the zeta potential, sediment porosity, rheological measurements, the floc formation mechanisms of the cobinders were proposed. The zeta potential decreased with an increase in the amount of added PVA, while it barely changed when CMC was added. This was attributed to the adsorption of PVA onto the pigment surface, while the adsorption of CMC was hindered by electrostatic repulsion. CMC cobinder increased the low-shear viscosity, but it resulted in relatively low viscosity under high-shear conditions, indicating the disruption of the formed flocs under high shear. The destabilization mechanism of the curtain coating differed depending on the type of cobinder. The PVA cobinder flocculates the coating color via a gelling mechanism, while the CMC cobinder flocculates the colors via a depletion flocculation mechanism.

Radiation crosslinking of CMC-Na at low dose and its application as substitute for hydrogel

International Nuclear Information System (INIS)

Liu Pengfei; Peng Jing; Li Jiuqiang; Wu Jilan

2005-01-01

The slight radiation-crosslinked CMC-Na as a substitute for hydrogel was prepared by gamma irradiation below gelation dose. The effects of various parameters such as absorbed dose, concentration of inorganic salts, pH, swelling temperature and swelling time on the swelling ratio in water were investigated in detail. This kind of slight crosslinked CMC-Na showed good water absorption below 60 deg. C, whereas, it became solution when heated up to 70 deg. C. Such CMC-Na gel is different from the true gel that is insoluble in boiled water; nevertheless, it can be used as hydrogel at room temperature and produced at low dose. Due to its low cost, it might be useful for its application in agriculture or others

[Preparation of Coated CMC-Fe0 Using Rheological Phase Reaction Method and Research on Degradation of TCE in Water].

Science.gov (United States)

Fan, Wen-jing; Cheng, Yue; Yu, Shu-zhen; Fan, Xiao-feng

2015-06-01

The coated nanoscale zero-valent iron (coated CMC-Fe0) was synthesized with cheap and environment friendly CMC as the coating agent using rheological phase reaction. The sample was characterized by means of XRD, SEM, TEM and N2 adsorption-stripping and used to study reductive dechlorination of TCE. The experimental results indicated that the removal rate of TCE was about 100% when the CMC-Fe0 dosage was 6 g x L(-1), the initial TCE concentration was 5 mg x L(-1) and the reaction time was 40 h. The TCE degradation reaction of coated CMC-Fe0 followed a pseudo-first-order kinetic model. Finally, the product could be simply recovered.

Canadian Meteorological Centre (CMC) Daily Snow Depth Analysis Data, Version 1

Data.gov (United States)

National Aeronautics and Space Administration — This data set consists of a Northern Hemisphere subset of the Canadian Meteorological Centre (CMC) operational global daily snow depth analysis. Data include daily...

Postoperative intra-abdominal collections using a sodium hyaluronate-carboxymethylcellulose (HA-CMC) barrier at the time of laparotomy for uterine or cervical cancers.

Science.gov (United States)

Leitao, Mario M; Byrum, Graham V; Abu-Rustum, Nadeem R; Brown, Carol L; Chi, Dennis S; Sonoda, Yukio; Levine, Douglas A; Gardner, Ginger J; Barakat, Richard R

2010-11-01

A prior analysis of patients undergoing laparotomy for ovarian malignancies at our institution revealed an increased rate of intra-abdominal collections using HA-CMC film during debulking surgery. The primary objective of the current study was to determine whether the use of HA-CMC is associated with the development of postoperative intra-abdominal collections in patients undergoing laparotomy for uterine or cervical malignancies. We retrospectively identified all laparotomies performed for these malignancies from 3/1/05 to 12/31/07. We identified cases involving the use of HA-CMC via billing records and operative reports. Intra-abdominal collections were defined as localized intraperitoneal fluid accumulations in the absence of re-accumulating ascites. We noted incidences of intra-abdominal collections, as well as other complications. Appropriate statistical tests were applied using SPSS 15.0. We identified 169 laparotomies in which HA-CMC was used and 347 in which HA-CMC was not used. The following were statistically similar in both cohorts: age, body mass index (BMI), primary site, surgery for recurrent disease, prior intraperitoneal surgery, and extent of current surgery. Intra-abdominal collections were seen in 6 (3.6%) of 169 HA-CMC cases compared to 10 (2.9%) of 347 non-HA-CMC cases (p=0.7). The rate of infected collections was similar in both groups (1.2% vs. 1.4%). In the subgroup that underwent tumor debulking, intra-abdominal collections were seen in 3 (11.5%) of 26 HA-CMC cases compared to 2 (5.4%) of 37 non-HA-CMC cases (p=0.6). HA-CMC use does not appear to be associated with postoperative intra-abdominal collections in patients undergoing laparotomy for uterine or cervical cancer. Copyright © 2010 Elsevier Inc. All rights reserved.

Effects of Synchronous and Asynchronous Computer-Mediated Communication (CMC) Oral Conversations on English Language Learners' Discourse Functions

Science.gov (United States)

AbuSeileek, Ali Farhan; Qatawneh, Khaleel

2013-01-01

This study aimed to explore the effects of synchronous and asynchronous computer mediated communication (CMC) oral discussions on question types and strategies used by English as a Foreign Language (EFL) learners. The participants were randomly assigned to two treatment conditions/groups; the first group used synchronous CMC, while the second…

Estimation of AOT and SDS CMC in a methanol using conductometry, viscometry and pyrene fluorescence spectroscopy methods

Science.gov (United States)

Mitsionis, Anastasios I.; Vaimakis, Tiverios C.

2012-09-01

Critical micelle concentration (CMC) of two anionic surfactants in methanol was estimated using conductometry, viscometry and pyrene fluorescence spectroscopy methods. The surfactants used, were sodium bis(2-ethylhexyl) sulfosuccinate (Aerosol-OT, AOT) and sodium dodecyl sulfate (SDS) dispersed in pure methanol. The CMC determination was evaluated in room temperature. The results have shown nearly similar concentrations.

Carboxymethyl Cellulose (CMC) from Oil Palm Empty Fruit Bunch (OPEFB) in the new solvent Dimethyl Sulfoxide (DMSO)/Tetrabutylammonium Fluoride (TBAF)

Science.gov (United States)

Eliza, M. Y.; Shahruddin, M.; Noormaziah, J.; Rosli, W. D. Wan

2015-06-01

The surplus of Oil Palm is the most galore wastes in Malaysia because it produced about half of the world palm oil production, which contributes a major disposal problem Synthesis from an empty fruit bunch produced products such as Carboxymethyl Cellulose (CMC), could apply in diverse application such as for paper coating, food packaging and most recently, the potential as biomaterials has been revealed. In this study, CMC was prepared by firstly dissolved the bleached pulp from OPEFB in mixture solution of dimethyl sulfoxide(DMSO)/tetrabutylammonium fluoride (TBAF) without any prior chemical modification. It took only 30 minutes to fully dissolve at temperature 60°C before sodium hydroxide (NaOH) were added for activation and monochloroacetateas terrifying agent. The final product is appeared in white powder, which is then will be analyzedby FTIR analysis. FTIR results show peaks appeared at wavenumber between 1609 cm-1 to 1614 cm-1 proved the existence of carboxymethyl groups which substitute OH groups at anhydroglucose(AGU) unit. As a conclusion, mixture solution of DMSO/TBAF is the suitable solvent used for dissolved cellulose before modifying it into CMC with higher Degree of Substitution (DS). Furthermore, the dissolution of the OPEFB bleached pulp was easy, simple and at a faster rate without prior chemical modification at temperature as low as 60°C.

Enhanced electrochemical properties of LiFePO4 (LFP) cathode using the carboxymethyl cellulose lithium (CMC-Li) as novel binder in lithium-ion battery.

Science.gov (United States)

Qiu, Lei; Shao, Ziqiang; Wang, Daxiong; Wang, Wenjun; Wang, Feijun; Wang, Jianquan

2014-10-13

Novel water-based binder CMC-Li is synthesized using cotton as raw material. The mechanism of the CMC-Li as a binder is reported. Electrochemical properties of batteries cathodes based on commercially available lithium iron phosphate (LiFePO4, LFP) and CMC-Li as a water-soluble binder are investigated. CMC-Li is a novel lithium-ion binder. Compare with conventional poly(vinylidene fluoride) (PVDF) binder, and the battery with CMC-Li as the binder retained 97.8% of initial reversible capacity after 200 cycles at 176 mAh g(-1), which is beyond the theoretical specific capacity of LFP. Constant current charge-discharge test results demonstrate that the LFP electrode using CMC-Li as the binder has the highest rate capability, follow closely by that using PVDF binder. The batteries have good electrochemical property, outstanding pollution-free and excellent stability. Copyright © 2014 Elsevier Ltd. All rights reserved.

Compact, Lightweight, Ceramic Matrix Composite (CMC) Based Acoustic Liners for Reducing Subsonic Jet Aircraft Engine Noise

Science.gov (United States)

Kiser, J. Douglas; Grady, Joseph E.; Miller, Christopher J.; Hultgren, Lennart S.; Jones, Michael G.

2016-01-01

Recent developments have reduced fan and jet noise contributions to overall subsonic aircraft jet-engine noise. Now, aircraft designers are turning their attention toward reducing engine core noise. The NASA Glenn Research Center and NASA Langley Research Center have teamed to investigate the development of a compact, lightweight acoustic liner based on oxide/oxide ceramic matrix composite (CMC) materials. The NASA team has built upon an existing oxide/oxide CMC sandwich structure concept that provides monotonal noise reduction. Oxide/oxide composites have good high temperature strength and oxidation resistance, which could allow them to perform as core liners at temperatures up to 1000C (1832F), and even higher depending on the selection of the composite constituents. NASA has initiated the evaluation of CMC-based liners that use cells of different lengths (variable-depth channels) or effective lengths to achieve broadband noise reduction. Reducing the overall liner thickness is also a major goal, to minimize the volume occupied by the liner. As a first step toward demonstrating the feasibility of our concepts, an oxide/oxide CMC acoustic testing article with different channel lengths was tested. Our approach, summary of test results, current status, and goals for the future are reported.

CMC-coated Fe{sub 3}O{sub 4} nanoparticles as new MRI probes for hepatocellular carcinoma

Energy Technology Data Exchange (ETDEWEB)

Sitthichai, Sudarat [Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Pilapong, Chalermchai, E-mail: chalermchai.pilapong@cmu.ac.th [Center of Excellence for Molecular Imaging (CEMI), Department of Radiologic Technology, Faculty of Associated Medical Sciences, Chiang Mai University, Chiang Mai 50200 (Thailand); Thongtem, Titipun [Department of Chemistry, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Materials Science Research Center, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Thongtem, Somchai, E-mail: schthongtem@yahoo.com [Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Materials Science Research Center, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand)

2015-11-30

Highlights: • Fe{sub 3}O{sub 4} nanoparticles (NPs) are superparamagnetic. • CMC is water-soluble and nontoxic cellulose-derivative polymer. • CMC-coated Fe{sub 3}O{sub 4} NPs were successfully prepared by co-precipitation method. • The promising NPs that can be used for magnetic resonance imaging application. - Abstract: Pure Fe{sub 3}O{sub 4} nanoparticles and Fe{sub 3}O{sub 4} magnetic nanoparticles (MNPs) coated with carboxymethyl cellulose (CMC) were successfully prepared by co-precipitating of FeCl{sub 2}·4H{sub 2}O and FeCl{sub 3}·6H{sub 2}O in the solutions containing ammonia at 80 °C for 3 h. Phase, morphology, particle-sized distribution, surface chemistry, and weight loss were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) including high-resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED), thermogravimetric analysis (TGA), and Fourier transform infrared (FTIR) spectroscopy. In this research, CMC-coated Fe{sub 3}O{sub 4} MNPs consisting of Fe{sup 2+} and Fe{sup 3+} ions with 543.3-mM{sup −1} s{sup −1} high relaxivity were detected and were able to be used for magnetic resonance imaging (MRI) application with very good contrast for targeting hepatocellular carcinoma (HCC) without any further vectorization.

Persistence of oral coatings of CMC and starch-based custard desserts

NARCIS (Netherlands)

Wijk, de R.A.; Kapper, C.; Borsboom, P.; Prinz, J.F.

2009-01-01

Food coatings that remain after swallowing starch-based or CMC-based custard desserts were investigated for 19 subjects. Foods were orally processed for 5 s using a pre-defined protocol, after which the food was swallowed. The remaining food coating was assessed sensorially as well as instrumentally

OCCASIONAL ADNOMINAL IDIOM MODIFICATION - A COGNITIVE LINGUISTIC APPROACH

Directory of Open Access Journals (Sweden)

Andreas Langlotz

2006-06-01

Full Text Available occasional Adnominal Idiom Modification - A Cognitive Linguistic Approach From a cognitive-linguistic perspective, this paper explores alternative types of adnoniinal modification in occasional variants of English verbal idioms. Being discussed against data extracted from the British National Corpiis (BNC, the model claims that in idioni-production idiomatic constructions are activated as complex linguistic schemas to code a context-specific target-conceptualisation. Adnominal pre- and postmodifications are one specific form of creative alteration to adapt the idiom for this purpose. Semantically, idiom-interna1 NPextension is not a uniforni process. It is necessary to distinguish two systematic types of adnominal modification: external and internal modification (Ernst 1981. While external NPmodification has adverbial function, ¡.e. it modifies the idiom as a unit, internal modification directly applies to the head-noun and thus depends on the degree of motivation and analysability of a given idiom. Following the cognitive-linguistic framework, these dimensions of idiom-transparency result from the language user's ability to remotivate the bipartite semantic structure by conceptual metaphors and metonymies.

Calibration of 3D Woven Preform Design Code for CMC Materials, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Mechanical and thermal performance of CMC components benefit from low part count, integrally fabricated designs of 3D woven reinforcement. The advantages of these...

Qualification Approach for the CMC Nose Cap of X-38

Science.gov (United States)

Weihs, H.; Gülhan, A.

2002-01-01

given by the predicted re-entry loads. Discrete tests on smaller samples representing cut outs of the structure were performed for further qualification which could not be done at the complete assembly due to the limitations of the test facilities (e.g. plasma channel test). In addition to the qualification of the material or coating capability, arc jet tests were performed to check the steps and gaps influence and qualify sealing function at the interfaces between the CMC parts. This paper will give an overview of the thermal and mechanical qualification of the nose cap system. This includes the vibration loads, thermal cycling, mechanical pressure and steps and gaps arc jet tests.

Multilateral Disarmament: Conspiracy for Common Sense. Occasional Paper 31.

Science.gov (United States)

Stanley, C. Maxwell

This paper outlines the danger of continuing the conventional and nuclear arms races and offers alternatives to ensure both peace and security. There are five major sections to the paper. In the first section, "Mulitlateral Approach," global multilateral accomplishments, regional multilateral activities, and bilateral negotiations are discussed.…

European Union Harmonized Excise Taxation : Occasional Importation Process

OpenAIRE

Tanhua, Taina

2013-01-01

This thesis was written with the intent to compile the information related to occasional importation process and European Union harmonized taxation into a single package. The process is based on European Union legislation and the aim of it is to unify the taxation within the internal market area. The national excise duties are not part of the occasional importation process but are partly linked to it. The first part of the thesis discusses the occasional importation of goods subject to ha...

Telecommunications and Higher Education. Occasional Paper No. 3.

Science.gov (United States)

Froke, Marlowe, Ed.; And Others

The first of the three papers which set the theme for this monograph on telecommunications is an examination of the implications of telecommunications developments for the learning society by Michael B. Spring. Marlowe Froke then looks at telecommunications development in institutions of higher education and discusses institutional change that…

Evaluation: The TADS Experience. Occasional Paper Number 4.

Science.gov (United States)

Suarez, Tanya M.; Vandiviere, Patricia

The paper considers the issues, decisions, and practices involved in evaluating the Technical Assistance Development System (TADS), a project to provide assistance to demonstration projects and start education agency grantees in the Handicapped Children's Early Education Program. Section 1 considers the focus for the evaluation in terms of its…

Efficient simultaneous removal of U(VI) and Cu(II) from aqueous solution using core-shell nZVI@SA/CMC-Ca beads

International Nuclear Information System (INIS)

Shuhong Hu; Xiaoyan Lin; Wenhui Zhao; Ministry of Education, Sichuan; Xuegang Luo

2018-01-01

Core-shell nanoscale zero-valent iron@alginate/carboxymethyl cellulose sodium composite loaded with calcium (nZVI@SA/CMC-Ca) beads were synthesized in this study using coaxial electronic injection method. The adsorbent structure was characterized via FT-IR, SEM, EDX and XPS. The adsorption behavior of U(VI) and Cu(II) on core-shell nZVI@SA/CMC-Ca beads was studied under various experimental parameters like pH, contact time and temperature. The isotherm and the kinetic data, pertaining to the adsorption of U(VI) and Cu(II) by core-shell nZVI@SA/CMC-Ca beads obeyed both the Langmuir and Freundlich isotherms model and the pseudo-second-order kinetics model, respectively. The thermodynamic parameters revealed the spontaneous and endothermic nature of the adsorption. The experiment of regeneration and reusability suggested core-shell nZVI@SA/CMC-Ca bead was a regenerated material. (author)

Synthesis and characterization of carboxymethyl cellulose from office waste paper: a greener approach towards waste management.

Science.gov (United States)

Joshi, Gyanesh; Naithani, Sanjay; Varshney, V K; Bisht, Surendra S; Rana, Vikas; Gupta, P K

2015-04-01

In the present study, functionalization of mixed office waste (MOW) paper has been carried out to synthesize carboxymethyl cellulose, a most widely used product for various applications. MOW was pulped and deinked prior to carboxymethylation. The deinked pulp yield was 80.62 ± 2.0% with 72.30 ± 1.50% deinkability factor. The deinked pulp was converted to CMC by alkalization followed by etherification using NaOH and ClCH2COONa respectively, in an alcoholic medium. Maximum degree of substitution (DS) (1.07) of prepared CMC was achieved at 50 °C with 0.094 M and 0.108 M concentrations of NaOH and ClCH2COONa respectively for 3h reaction time. The rheological characteristics of 1-3% aqueous solution of optimized CMC product showed the non-Newtonian pseudoplastic behavior. Fourier transform infra red (FTIR), nuclear magnetic resonance (NMR) and scanning electron microscope (SEM) study were used to characterize the CMC product. Copyright © 2014 Elsevier Ltd. All rights reserved.

Practical use of CMC-amended rhizobial inoculant for Mucuna pruriens cultivation to enhance the growth and protection against Macrophomina phaseolina.

Science.gov (United States)

Aeron, Abhinav; Khare, Ekta; Kumar Arora, Naveen; Kumar Maheshwari, Dinesh

2012-01-01

In many parts of the world Mucuna pruriens is used as an important medicinal, forage and green manure crop. In the present investigation the effect of the addition of CMC in carrier during development of bioformulation on shelflife, plant growth promotive and biocontrol activity against Macrophomina phaseolina was screened taking M. pruriens as a test crop. Ensifer meliloti RMP6(Ery+Kan+) and Bradyrhizobium sp. BMP7(Tet+Kan+) (kanamycin resistance engineered by Tn5 transposon mutagenesis) used in the study showed production of siderophore, IAA, solubilizing phosphate and biocontrol of M. phaseolina. RMP6(Ery+Kan+) also showed ACC deaminase activity. The survival of both the strains in sawdust-based bioformulation was enhanced with an increase in the concentration of CMC from 0 to 1%. At 0% CMC Bradyrhizobium sp. BMP7(Tet+Kan+) showed more increase in nodule number/plant (500.00%) than E. meliloti RMP6(Ery+Kan+) (52.38%), over the control in M. phaseolina-infested soil. There was 185.94% and 59.52% enhancement in nodule number/plant by RMP6(Ery+Kan+) and BMP7(Tet+Kan+) with an increase in the concentration of CMC from 0% to 1% in the bioformulations. However further increase in concentration of CMC did not result in enhancement in survival of either the strains or nodule number/plant.

Influence of Polyethylene Glycol (PEG in CMC-NH4BR Based Polymer Electrolytes: Conductivity and Electrical Study

Directory of Open Access Journals (Sweden)

Nur Khalidah Zainuddin

2017-04-01

Full Text Available The present work was carried with new type and promising polymer electrolytes system by development of carboxylmethylcellulose (CMC doped NH4Br and plasticized with polyethylene glycol (PEG. The sample was successfullyprepared via solution casting with no separation phase and good mechanical properties. The electrical conductivity andthermal conductivity of CMC-NH4Br-PEG based PEs system have been measured by the electrical impedancespectroscopy method in the temperature range of 303–373 K. The highest ionic conductivity gained is 2.48 x 10-3 Scm-1at ambient temperature for sample contain with 8 wt. % PEG. It can be concluded that the plasticized is accountable forthe conductance and assist to enhancing the ionic conductivity of the CMC-NH4Br-PEG electrolyte system. The addition of PEG to the CMC-based electrolyte can enhance towards the cation mobility which is turn increases ionic conductivity. The conductivity-temperature of plasticized BdPEs system was found obeys the Arrhenius relation where the ionic conductivity increases with temperature and activation energy for the ions hopping of the highest conducting PEs system only required small value to migrate. The electrical studies show a non-Debye behaviour of BdPEs based on the analyzed data using complex permittivity, ε* and complex electrical modulus, M* of the sample at different temperature.

Apprenticeships and Traineeships in the Downturn. Occasional Paper

Science.gov (United States)

Karmel, Tom; Misko, Josie

2009-01-01

Apprenticeships have a very long history in Australia, building on the traditions of the medieval guilds. The essence of the apprenticeship is the contract of training--a legal contract between an individual, an employer and a training provider. The defining characteristic is the combination of employment and training. The purpose of this paper is…

The optimization of CMC concentration as graphite binder on the anode of LiFePO4 battery

Science.gov (United States)

Hidayat, S.; Cahyono, T.; Mindara, J. Y.; Riveli, N.; Alamsyah, W.; Rahayu, I.

2017-05-01

Recently, the most dominating power supply on the mobile electronics market are rechargeable Lithium-ion batteries. This is because of a higher energy density and a longer lifetime compared to similar rechargeable battery systems. Graphite is commonly used as anode material in the Lithium-ion batteries, because of its excellent electrochemical characteristics and low cost fabrication. In this paper, we reported the optimization of the concentration of the CMC (carboxymethyl cellulose), that acts as the binder for graphite anode. Based on our experimental results, the best composition of graphite : C : CMC is 90 : 8 : 2 in weight %. Anode with such composition has, based on SEM measurement, a relatively good surface morphology, while it also has relatively high conductivity, about 2.68 S/cm. The result of cyclic voltammogram with a scan rate of 10 mV/s in the voltage range of 0 to 1 Volt, shows the peak of reduction voltage at 0.85 Volts and the peak voltage of oxidation is at -1.5 Volt. The performance of the battery system with LiFePO4 set as the cathode, shows that the working voltage is about 2.67 Volts at 1 mA current-loading, with the efficiency around 47%.

Cough response to citric acid aerosol in occasional smokers.

OpenAIRE

Pounsford, J C; Saunders, K B

1986-01-01

Twenty two normal women volunteers underwent a standard cough provocation test by inhaling solutions of citric acid of progressively increasing concentration. Eight were non-smokers, eight moderate smokers, and six occasional smokers. All the non-smokers and moderate smokers coughed. Moderate smokers tended to cough more than non-smokers, but not significantly so. None of the occasional smokers coughed at all (p less than 0.001). Possibly the ability to smoke occasionally with enjoyment is a ...

Optimization of formulation of cmc-na, xanthan gum and carrageenan affecting the physicochemical properties of papaya-wolfberry beverage using response surface methodology

International Nuclear Information System (INIS)

Geo, J.Z.H.; Zong, G.L.P.

2013-01-01

CMC-Na, xanthan gum and carrageenan are widely employed in food industry. They were used for its thickening properties of aqueous solutions or emulsifying abilities. The present work aims to optimize the formula of the three stabilizers in the process of papaya-wolfberry beverage by response surface methodology (RSM). The results showed that the models were significantly (p<0.05) fitted for describing the viscosity and cloudiness of papaya-wolfberry beverage. The results also indicated that the linear terms of CMC-Na and xanthan gum were the most significant (p<0.05) variables affecting the viscosity, while xanthan gum and carrageenan were the most significant (p<0.05) variable affecting the cloudiness. The interaction of CMC-Na and xanthan gum behaved extremely significant for viscosity. From the optimization procedure, the best formula for viscosity was obtained at the combined level of 0.0652% (w/w) CMC-Na, 0.1070% (w/w) xanthan gum and 0.1485% (w/w) carrageenan, and the other group of 0.0623% (w/w) CMC-Na, 0.1375% (w/w) xanthan gum and 0.1461% (w/w) carrageenan for cloudiness. The results of our study would be used to improve the quality of papaya-wolfberry beverage and increase its economic efficiency. (author)

Carboxymethyl cellulose (CMC)-loaded Co-Cu doped manganese ferrite nanorods as a new dual-modal simultaneous contrast agent for magnetic resonance imaging and nanocarrier for drug delivery system

Science.gov (United States)

Abbasi Pour, Sajjad; Shaterian, Hamid Reza; Afradi, Mojgan; Yazdani-Elah-Abadi, Afshin

2017-09-01

We synthesized Co0.25Cu0.25Mn0.5Fe2O4@CMC (CCMFe2O4@CMC) nanorods as a new dual-modal simultaneous for magnetic resonance imaging contrast agent and nanocarrier for drug delivery system. Impact of CCMFe2O4@CMC nanorods were investigated on the longitudinal (T1), transverse (T2) and transverse (T2∗) relaxation times for in vitro MRI contrast agent in water and also for drug delivery system, L-dopa was coated on CCMFe2O4@CMC nanorods and then in vitro drug release test was carried out at three PHs values and different temperatures. In vitro MR imaging demonstrated that r2 value of CCMFe2O4@CMC nanorods is 138.33 mM-1 s-1, CCMFe2O4@CMC is useful as T2 contrast agent relative to other T2 contrast agants. In vitro drug release test shows the amount of released L-dopa from CCMFe2O4@CMC nanorods at medium with pH = 1.2 is more than pH = 5.3 and 7.4.

Language, mobile phones and internet : a study of SMS texting, email, IM and SNS chats in computer mediated communication (CMC) in Kenya

NARCIS (Netherlands)

Barasa, Sandra Nekesa

2010-01-01

This book examines the use of language in Computer Mediated Communication (CMC) genres in Kenya. It focuses on Short Messaging Service (SMS), Email, Instant Messages (IM) and Social Network Sites (SNS) genres. It presents an overview of the use and characteristics of Kenyan languages in CMC texts

My First CMC Article Revisited: A Window on Spanish L2 Interlanguage

Science.gov (United States)

Blake, Robert

2016-01-01

The computer-assisted language learning (CALL) field seems to change overnight with new technological affordances. Blake revisits his 2000 "LLT" article on computer-mediation communication (CMC) in order to reflect on how the field has examined this topic over the past decade or so. While the Interaction Hypothesis continues to guide…

Fixed points of occasionally weakly biased mappings

OpenAIRE

Y. Mahendra Singh, M. R. Singh

2012-01-01

Common fixed point results due to Pant et al. [Pant et al., Weak reciprocal continuity and fixed point theorems, Ann Univ Ferrara, 57(1), 181-190 (2011)] are extended to a class of non commuting operators called occasionally weakly biased pair[ N. Hussain, M. A. Khamsi A. Latif, Commonfixed points for JH-operators and occasionally weakly biased pairs under relaxed conditions, Nonlinear Analysis, 74, 2133-2140 (2011)]. We also provideillustrative examples to justify the improvements. Abstract....

Overview of Cooperative Monitoring Concepts and the CMC

International Nuclear Information System (INIS)

Biringer, Kent L.

1999-01-01

Cooperative monitoring holds the promise of utilizing many technologies from conflicts of the past to implement agreements of peace in the future. Important approaches to accomplish this are to develop the framework for assessing monitoring opportunities and to provide education and training on the technologies and experience available for sharing with others. The Cooperative Monitoring Center (CMC) at Sandia National Laboratories is working closely with agencies throughout the federal government, academics at home and abroad, and regional organizations to provide the technical tools needed to assess, design, analyze, and implement these cooperative agreements. In doing so, the goals of building regional confidence and increasing trust and communication can be furthered

Synthesis and electrospinning carboxymethyl cellulose lithium (CMC-Li) modified 9,10-anthraquinone (AQ) high-rate lithium-ion battery.

Science.gov (United States)

Qiu, Lei; Shao, Ziqiang; Liu, Minglong; Wang, Jianquan; Li, Pengfa; Zhao, Ming

2014-02-15

New cellulose derivative CMC-Li was synthesized, and nanometer CMC-Li fiber was applied to lithium-ion battery and coated with AQ by electrospinning. Under the protection of inert gas, modified AQ/carbon nanofibers (CNF)/Li nanometer composite material was obtained by carbonization in 280 °C as lithium battery anode materials for the first time. The morphologies and structures performance of materials were characterized by using IR, (1)H NMR, SEM, CV and EIS, respectively. Specific capacity was increased from 197 to 226.4 mAhg(-1) after modification for the first discharge at the rate of 2C. Irreversible reduction reaction peaks of modified material appeared between 1.5 and 1.7 V and the lowest oxidation reduction peak of the difference were 0.42 V, the polarization was weaker. Performance of cell with CMC-Li with the high degree of substitution (DS) was superior to that with low DS. Cellulose materials were applied to lithium battery to improve battery performance by electrospinning. Copyright © 2013 Elsevier Ltd. All rights reserved.

The effect of CMC and arabic gum stabilizer combination on the characteristics of soursop velva (Annona muricata L.)

Science.gov (United States)

Parnanto, N. H. R.; Yudhistira, B.; Pertiwi, S. R.; Pangestika, A.

2018-03-01

The aims of this study were to determine the effect of the combination of CMC and Arabic Gum stabilizer toward the soursop velva characteristics and to determine the best stabilizer combination of soursop velva. This study was performed using Completely Randomized Design (CRD) with one factor: combination of CMC and Arabic Gum stabilizer using two sample replications and the analysis was repeated three times. The result showed that the use of the combination of CMC and Arabic Gum stabilizer gave a significant effect on the overrun value, melting power, total dissolved solids, moisture content, dietary fiber, taste, texture and overalls. Moreover, there were no significant effect on color and flavor of the soursop velva. The experiment showed that soursop velva F4 (3:1) was the best formula with overrun value 9.93%, the melting power was 22 minutes 52 seconds, the total dissolved solids 19,10°Brix, the moisture content 71.508%, dietary fiber 3.301% and it has sensory values of color, taste, flavor, texture, overall at 3.66, 3.267, 3.33, 4.06, 3.10 respectively.

Educational Auditing and Quality Assurance. Occasional Paper No. 4.

Science.gov (United States)

Conner, James E.; Lessinger, Leon M.

This paper considers how to respond to new requirements for adequate disclosure of the schools' performance to the public. It proposes the use of three powerful constructs--quality control, quality assurance, and an independent educational accomplishment audit (IEAA). The essential elements of quality control are agreeing on and specifying desired…

Study of wine tartaric acid salt stabilization by addition of carboxymethylcellulose (CMC: comparison with the « protective colloids » effect

Directory of Open Access Journals (Sweden)

Vincent Gerbaud

2010-12-01

Significance and impact of the study: The OIV-OENO 366-2009 and OIV-OENO 02/2008 resolutions recently authorized the use of CMC to prevent tartaric acid salt precipitation. With no impact on health, and stable under heating and in acid solution, CMC is an efficient candidate for tartaric stabilization. The optimal concentration of 20 mg.L-1 (2 g.hL-1 should however be adapted to local wine storage conditions and KHT crystallization risk.

Retention of storage quality and post-refrigeration shelf-life extension of plum (Prunus domestica L.) cv. Santa Rosa using combination of carboxymethyl cellulose (CMC) coating and gamma irradiation

International Nuclear Information System (INIS)

Hussain, Peerzada R.; Suradkar, Prashant P.; Wani, Ali M.; Dar, Mohd A.

2015-01-01

Carboxymethyl cellulose (CMC) coatings alone and in combination with gamma irradiation was tested for maintaining the storage quality and extending shelf-life of plum. Matured green plums were CMC coated at levels 0.5–1.0% w/v and gamma irradiated at 1.5 kGy. The treated fruit including control was stored under ambient (temperature 25±2 °C, RH 70%) and refrigerated (temperature 3±1 °C, RH 80%) conditions. In fruits treated with individual treatments of 1.0% w/v CMC; 1.5 kGy irradiation and combination of 1.0% w/v CMC and 1.5 kGy irradiation, no decay was recorded up to 11, 17 and 21 days of ambient storage. Irradiation alone at 1.5 kGy gave 8 days extension in shelf-life of plum compared to 5 days by 1.0% w/v CMC coating following 45 days of refrigeration. All combinatory treatments of CMC coating and irradiation proved beneficial in maintaining the storage quality as well as delaying the decaying of plum during post-refrigerated storage at 25±2 °C, RH 70% but, combination of CMC at 1.0% w/v and 1.5 kGy irradiation was found significantly (p≤0.05) superior to all other treatments in maintaining the storage quality and delaying the decaying of plum. CMC coating of plums at 1.0% w/v followed by irradiation at 1.5 kGy resulted in chlorophyll retention of 19.4% after 16 days compared to 10% in control after 8 days of ambient storage. Under refrigerated conditions, same treatment gave retention of 67.6% in chlorophyll compared to 10.6% in control after 35 days of storage. The above combinatory treatment resulted in extension of 11 days in shelf-life of plum during post-refrigerated storage at 25±2 °C, RH 70% following 45 days of refrigeration. Based on microbial analysis, irradiation alone at 1.5 kGy and in combination with 1.0% w/v CMC resulted in 2.0 and 1.8 log reduction in yeast and mold count of plum fruit after 20 and 35 days of ambient and refrigerated storage, thereby ensuring consumer safety. - Highlights: • Irradiation and CMC alone at 1.5 k

Calorimetric Evidence about the Application of the Concept of CMC to Asphaltene Self-Association

DEFF Research Database (Denmark)

Garcia, Daniel Merino; Andersen, Simon Ivar

2005-01-01

that asphaltenes may also have a concentration at which self-association occurs (CMC). This article presents evidence found by calorimetry and spectroscopic techniques, that suggest that this concept may not be adequate for asphaltene self-association in toluene solutions. Isothermal titration calorimetry has been...

CMC-coated Fe3O4 nanoparticles as new MRI probes for hepatocellular carcinoma

Science.gov (United States)

Sitthichai, Sudarat; Pilapong, Chalermchai; Thongtem, Titipun; Thongtem, Somchai

2015-11-01

Pure Fe3O4 nanoparticles and Fe3O4 magnetic nanoparticles (MNPs) coated with carboxymethyl cellulose (CMC) were successfully prepared by co-precipitating of FeCl2·4H2O and FeCl3·6H2O in the solutions containing ammonia at 80 °C for 3 h. Phase, morphology, particle-sized distribution, surface chemistry, and weight loss were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) including high-resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED), thermogravimetric analysis (TGA), and Fourier transform infrared (FTIR) spectroscopy. In this research, CMC-coated Fe3O4 MNPs consisting of Fe2+ and Fe3+ ions with 543.3-mM-1 s-1 high relaxivity were detected and were able to be used for magnetic resonance imaging (MRI) application with very good contrast for targeting hepatocellular carcinoma (HCC) without any further vectorization.

Exploring the usefulness of comprehensive care plans for children with medical complexity (CMC: a qualitative study

Directory of Open Access Journals (Sweden)

Adams Sherri

2013-01-01

Full Text Available Abstract Background The Medical Home model recommends that Children with Special Health Care Needs (CSHCN receive a medical care plan, outlining the child’s major medical issues and care needs to assist with care coordination. While care plans are a primary component of effective care coordination, the creation and maintenance of care plans is time, labor, and cost intensive, and the desired content of the care plan has not been studied. The purpose of this qualitative study was to understand the usefulness and desired content of comprehensive care plans by exploring the perceptions of parents and health care providers (HCPs of children with medical complexity (CMC. Methods This qualitative study utilized in-depth semi-structured interviews and focus groups. HCPs (n = 15 and parents (n = 15 of CMC who had all used a comprehensive care plan were recruited from a tertiary pediatric academic health sciences center. Themes were identified through grounded theory analysis of interview and focus group data. Results A multi-dimensional model of perceived care plan usefulness emerged. The model highlights three integral aspects of the care plan: care plan characteristics, activating factors and perceived outcomes of using a care plan. Care plans were perceived as a useful tool that centralized and focused the care of the child. Care plans were reported to flatten the hierarchical relationship between HCPs and parents, resulting in enhanced reciprocal information exchange and strengthened relationships. Participants expressed that a standardized template that is family-centered and includes content relevant to both the medical and social needs of the child is beneficial when integrated into overall care planning and delivery for CMC. Conclusions Care plans are perceived to be a useful tool to both health care providers and parents of CMC. These findings inform the utility and development of a comprehensive care plan template as well as a model of how

It's Just a Game, Right? Types of Play in Foreign Language CMC

Directory of Open Access Journals (Sweden)

Chantelle N. Warner

2004-05-01

Full Text Available This study focuses on the various playful uses of language that occurred during a semester-long study of two German language courses using one type of synchronous network-based medium, the MOO. Research and use of synchronous computer-mediated communication (CMC have flourished in the study of second-language acquisition (SLA since the late 1990s; however, the primary focus has been on the potential benefits of using CMC to increase the amount of communication (Beauvois, 1997; Kern, 1995; Warschauer, 1997, motivate students (Beauvois, 1997; Kern, 1995; Warschauer, 1997 and foster the exchange of ideas (Beauvois, 1997; Kern, 1995; von der Emde, Schneider, & Kötter, 2001; Warschauer, 1997. Only more recently has research within SLA begun to investigate the types of communication that occur online.1 An analysis of the transcripts from a second-semester German course and an upper-level German communication course reveal that a large portion of the language use online cannot be described using standard referential definitions of communication, but rather is playful in nature. Using research from SLA and theories on social interaction, this article investigates the different types of play that occurred within the online discussions and the possible implications of the presence of play in online discourse.

An exploratory examination of the relationship between motivational factors and the degree to which the higher education faculty integrate computer-mediated communication (CMC) tools into their courses

Science.gov (United States)

Murage, Francis Ndwiga

The stated research problem of this study was to examine the relationship between motivational factors and the degree to which the higher education faculty integrate CMC tools into their courses. The study population and sample involved higher education faculty teaching in science departments at one public university and three public colleges in the state of West Virginia (N = 153). A Likert-type rating scale survey was used to collect data based on the research questions. Two parts of the survey were adopted from previous studies while the other two were self-constructed. Research questions and hypothesis were analyzed using both descriptive and inferential analyses. The study results established a positive relationship between motivational factors and the degree the higher education faculty integrate CMC tools in their courses. The results in addition established that faculty are highly motivated to integrate CMC tools by intrinsic factors, moderately motivated by environmental factors and least motivated by extrinsic factors. The results also established that the most integrated CMC tools were those that support asynchronous methods of communication while the least integrated were those that support synchronous methods of communication. A major conclusion made was that members of higher education faculty are more likely to be motivated to integrate CMC tools into their courses by intrinsic factors rather than extrinsic or environmental factors. It was further concluded that intrinsic factors that supported and enhanced student learning as well as those that were altruistic in nature significantly influenced the degree of CMC integration. The study finally concluded that to larger extent, there is a relationship between motivational factors and the degree to which the higher education faculty integrate CMC tools in their courses. A major implication of this study was that institutions that wish to promote integration of CMC technologies should provide as much

Cooperative Monitoring Center Occasional Paper/9: De-Alerting Strategic Ballistic Missiles

Energy Technology Data Exchange (ETDEWEB)

Connell, Leonard W.; Edenburn, Michael W.; Fraley, Stanley K.; Trost, Lawrence C.

1999-03-01

This paper presents a framework for evaluating the technical merits of strategic ballistic missile de-alerting measures, and it uses the framework to evaluate a variety of possible measures for silo-based, land-mobile, and submarine-based missiles. De-alerting measures are defined for the purpose of this paper as reversible actions taken to increase the time or effort required to launch a strategic ballistic missile. The paper does not assess the desirability of pursuing a de-alerting program. Such an assessment is highly context dependent. The paper postulates that if de-alerting is desirable and is used as an arms control mechanism, de-alerting measures should satisfy specific cirteria relating to force security, practicality, effectiveness, significant delay, and verifiability. Silo-launched missiles lend themselves most readily to de-alerting verification, because communications necessary for monitoring do not increase the vulnerabilty of the weapons by a significant amount. Land-mobile missile de-alerting measures would be more challenging to verify, because monitoring measures that disclose the launcher's location would potentially increase their vulnerability. Submarine-launched missile de-alerting measures would be extremely challlenging if not impossible to monitor without increasing the submarine's vulnerability.

CAUSES AND WAYS OF OCCURRENCE OF OCCASIONAL WORDS IN THE LANGUAGE OF THE PRESS

Directory of Open Access Journals (Sweden)

Radchenko Marina Vasilevna

2013-04-01

Full Text Available This article contains an analytical overview of opinions of modern linguists on the causes of neologisms appearance and the principles of their differentiation. The author identifies the criteria for attributing the word to occasional words by comparing them with neologisms. Following other researchers, the author believes that the distinctive feature of occasional words and neologisms is that they belong to speech and language, respectively. The distinctive features of occasional words according to M.V. Radchenko are novelty, one-time use, and the fact that their appearance is usually dictated by the creative challenges faced by the author. However, these do not allow reckoning the occasional words among speech. The author is convinced that the occasional use, first of all, is in violation of grammar, word forming, lexical and semantic rules of the language. This is a motivated irregularity that is rationally organized. The author describes the causes of neologisms appearance in the language of the media. The article details the derivation aspect of occasional words. On the examples of journalistic texts, M.V. Radchenko describes the regulatory and non-normative methods of occasional words forming. Finally, she concludes that for the occasional word forming the regulatory models already existing in the language are often used.

Stochastic Loss of an Occasionally-Essential Function

Science.gov (United States)

Jerison, Elizabeth; Desai, Michael

2013-03-01

Many biological functions are useful only in specific circumstances. For example, hundreds of single-gene deletions in yeast increase growth rate in some laboratory conditions. During periods of disuse, these genes are vulnerable to disruption or loss via random mutation and genetic drift. Yet they are maintained in natural populations, suggesting that they must be useful at least occasionally. Here we quantify the risk of loss of such occasionally-important functions. We focus on predicting how the statistics of environmental change determine the mean time to loss of the function. Our results suggest a refinement to the Savageau 'use-it-or-lose-it' principle of regulation, and put theoretical lower bounds on how often these functions must be necessary to the organism, in order to be maintained.

A qualitative study of health care providers' perceptions and experiences of working together to care for children with medical complexity (CMC).

Science.gov (United States)

Altman, Lisa; Zurynski, Yvonne; Breen, Christie; Hoffmann, Tim; Woolfenden, Susan

2018-01-31

Children with medical complexity (CMC) have a wide range of long term health problems and disabilities that have an adverse impact on their quality of life. They have high levels of family identified health care needs and health care utilisation. There is no Australian literature on the experiences of health care providers working in the Australian tertiary, secondary and primary health care system, whilst managing CMC. This information is essential to inform the design of integrated health care systems for these children. We address this knowledge gap by exploring the perceptions and experiences of health care providers on the provision of health care for CMC aged 0 to 18 years. A qualitative research study was undertaken. Stakeholder forums, group and individual in depth interviews were undertaken using a semi-structured interview guide. The stakeholder forums were audio recorded and transcribed verbatim. Field notes of the stakeholder forums, group and individual interviews were taken. Inductive thematic analysis was undertaken to identify key themes. One hundred and three providers took part in the stakeholder forums and interviews across 3 local health districts, a tertiary paediatric hospital network, and primary health care organisations. Providers expressed concern regarding family capacity to negotiate the system, which was impacted by the medical complexity of the children and psychosocial complexity of their families. Lack of health care provider capacity in terms of their skills, time and availability to manage CMC was also a key problem. These issues occurred within a health system that had impaired capacity in terms of fragmentation of care and limited communication among health care providers. When designing integrated care models for CMC, it is essential to understand and address the challenges experienced by their health care providers. This requires adequate training of providers, additional resources and time for coordination of care, improved

CAUSES AND WAYS OF OCCURRENCE OF OCCASIONAL WORDS IN THE LANGUAGE OF THE PRESS

Directory of Open Access Journals (Sweden)

Марина Васильевна Радченко

2013-05-01

Full Text Available This article contains an analytical overview of opinions of modern linguists on the causes of neologisms appearance and the principles of their differentiation. The author identifies the criteria for attributing the word to occasional words by comparing them with neologisms. Following other researchers, the author believes that the distinctive feature of occasional words and neologisms is that they belong to speech and language, respectively.The distinctive features of occasional words according to M.V. Radchenko are novelty, one-time use, and the fact that their appearance is usually dictated by the creative challenges faced by the author. However, these do not allow reckoning the occasional words among speech. The author is convinced that the occasional use, first of all, is in violation of grammar, word forming, lexical and semantic rules of the language. This is a motivated irregularity that is rationally organized.The author describes the causes of neologisms appearance in the language of the media.The article details the derivation aspect of occasional words. On the examples of journalistic texts, M.V. Radchenko describes the regulatory and non-normative methods of occasional words forming. Finally, she concludes that for the occasional word forming the regulatory models already existing in the language are often used.DOI: http://dx.doi.org/10.12731/2218-7405-2013-4-29

Analysis of cash flow ratios: A study on CMC

Directory of Open Access Journals (Sweden)

Somnath Das

2018-01-01

Full Text Available Cash flow ratios help financial users get relevant information about financial resources for a given time. Cash flow ratios are now used more than the traditional ones because it is more effective and justified. Cash flow based ratios are especially surprising because they do not only play a significant role in the credit rating of evaluation, but also forecast the failure of a corporation. In this study, we perform an empirical investigation on a company named CMC. From the study, it is clear that the liquidity and solvency positions of the company were moderate whereas the company maintained low profitability. On the other hand, the efficiency and sufficiency ratios of the study give us a new look on financial judgement.

Skill Shortages in the Trades during Economic Downturns. Occasional Paper

Science.gov (United States)

Oliver, Damian

2011-01-01

During the recent economic downturn, media and industry reports of skill shortages in the trades continued to appear. The intent of this paper is to examine the evidence for skill shortages in the trades persisting during the economic downturns over the last 20 years, using various indicators. These include employment growth, vacancy rates,…

Communication Challenges Learners Face Online: Why Addressing CMC and Language Proficiency Will Not Solve Learners' Problems

Science.gov (United States)

Jung-Ivannikova, Liubov

2016-01-01

Computer-mediated communication (CMC) has been argued to cause (mis)communication issues. Research and practice suggest a range of tactics and strategies for educators focused on how to encourage and foster communication in a virtual learning environment (VLE) (eg, Salmon). However, while frameworks such as Salmon's support the effective…

Determination of Consciousness and Awareness of the Public in Lefka about the Cyprus Mining Corporation (CMC)

Science.gov (United States)

Gündüz, Serife; Erbulut, Can; Öznacar, Behcet; Bastas, Mert

2016-01-01

Supporting the increase of environmental consciousness with environmental education is always important in order to make healthy recommendations specific to the countries. Aim of this study is to determine the awareness and consciousness of the local community against the environmental pollution caused by the CMC mine by survey technique. 123…

Smoked cannabis' psychomotor and neurocognitive effects in occasional and frequent smokers.

Science.gov (United States)

Desrosiers, Nathalie A; Ramaekers, Johannes G; Chauchard, Emeline; Gorelick, David A; Huestis, Marilyn A

2015-05-01

Δ9-Tetrahydrocannabinol (THC), the primary psychoactive constituent in cannabis, impairs psychomotor performance, cognition and driving ability; thus, driving under the influence of cannabis is a public safety concern. We documented cannabis' psychomotor, neurocognitive, subjective and physiological effects in occasional and frequent smokers to investigate potential differences between these smokers. Fourteen frequent (≥4x/week) and 11 occasional (cannabis smokers entered a secure research unit ∼19 h prior to smoking one 6.8% THC cigarette. Cognitive and psychomotor performance was evaluated with the critical tracking (CTT), divided attention (DAT), n-back (working memory) and Balloon Analog Risk (BART) (risk-taking) tasks at -1.75, 1.5, 3.5, 5.5 and 22.5 h after starting smoking. GLM (General Linear Model) repeated measures ANOVA was utilized to compare scores. Occasional smokers had significantly more difficulty compensating for CTT tracking error compared with frequent smokers 1.5 h after smoking. Divided attention performance declined significantly especially in occasional smokers, with session × group effects for tracking error, hits, false alarms and reaction time. Cannabis smoking did not elicit session × group effects on the n-back or BART. Controlled cannabis smoking impaired psychomotor function, more so in occasional smokers, suggesting some tolerance to psychomotor impairment in frequent users. These data have implications for cannabis-associated impairment in driving under the influence of cannabis cases. Published by Oxford University Press 2015. This work is written by (a) US Government employee(s) and is in the public domain in the US.

Spatially distributed damage detection in CMC thermal protection materials using thin-film piezoelectric sensors

Science.gov (United States)

Kuhr, Samuel J.; Blackshire, James L.; Na, Jeong K.

2009-03-01

Thermal protection systems (TPS) of aerospace vehicles are subjected to impacts during in-flight use and vehicle refurbishment. The damage resulting from such impacts can produce localized regions that are unable to resist extreme temperatures. Therefore it is essential to have a reliable method to detect, locate, and quantify the damage occurring from such impacts. The objective of this research is to demonstrate a capability that could lead to detecting, locating and quantifying impact events for ceramic matrix composite (CMC) wrapped tile TPS via sensors embedded in the TPS material. Previous research had shown a correlation between impact energies, material damage state, and polyvinylidene fluoride (PVDF) sensor response for impact energies between 0.07 - 1.00 Joules, where impact events were located directly over the sensor positions1. In this effort, the effectiveness of a sensor array is evaluated for detecting and locating low energy impacts on a CMC wrapped TPS. The sensor array, which is adhered to the internal surface of the TPS tile, is used to detect low energy impact events that occur at different locations. The analysis includes an evaluation of signal amplitude levels, time-of-flight measurements, and signal frequency content. Multiple impacts are performed at each location to study the repeatability of each measurement.

Establishing an Empirical Link between Computer-Mediated Communication (CMC) and SLA: A Meta-Analysis of the Research

Science.gov (United States)

Lin, Huifen

2014-01-01

Drawing on interactionist and socio-cultural theories, tools provided in computer-mediated communication (CMC) environments have long been considered able to create an environment that shares many communicative features with face-to-face communication. Over the past two decades, researchers have employed a variety of strategies to examine the…

What motivates occasional faculty developers to lead faculty development workshops? A qualitative study.

Science.gov (United States)

O'Sullivan, Patricia S; Irby, David M

2015-11-01

The demand for faculty development is ongoing, and many medical schools will need to expand their pool of faculty developers to include physicians and scientists whose primary expertise is not education. Insight into what motivates occasional faculty developers can guide recruitment and retention strategies. This study was designed to understand the motivations of faculty developers who occasionally (one to three times each year) lead faculty development workshops. Qualitative data were collected in March and April 2012 from interviews with faculty developers who occasionally taught workshops from 2007 to 2012 in the University of California, San Francisco, School of Medicine's faculty development program. The interviews were audiotaped and transcribed. The authors thematically analyzed the transcripts using a general inductive approach and developed codes sensitized by motivation theories. The authors interviewed 29/30 (97%) occasional faculty developers and identified five themes: mastery (desire to learn and develop professionally), relatedness (enjoyment of working with and learning from others), duty (sense of obligation to give back and be a good academic citizen), purpose (commitment to improving local teaching and ultimately patient care), and satisfaction (fun and enjoyment). Four of the themes the authors found are well addressed in motivation theory literature: mastery, relatedness, duty, and purpose. Whereas these four are motivators for occasional faculty developers, it is the fifth theme-satisfaction-that the authors feel is foundational and links the others together. Armed with this understanding, individuals leading faculty development programs can develop strategies to recruit and retain occasional faculty developers.

Uncovering stable and occasional human mobility patterns: A case study of the Beijing subway

Science.gov (United States)

Yong, Nuo; Ni, Shunjiang; Shen, Shifei; Chen, Peng; Ji, Xuewei

2018-02-01

There have generally been two kinds of approaches to the empirical study of human mobility. At the group level, some valuable information might be submerged in statistical noise, while due to the diversity of individual purpose and preference, there is still no general statistical regularity of human mobility at the individual level. In this paper, we considered group-level human mobility as the combination of several basic patterns and analyzed the collective mobility by category. Utilizing matrix factorization and correlation analysis, we extracted some of the stable/occasional components from the collective human mobility in the Beijing subway and found that the departure and arrival mobility patterns have different characteristics, both in time and space, under various conditions. We classified individual records into different patterns and analyzed the most likely trip distance by category. The proposed method can decompose stable/occasional mobility patterns from the collective mobility and identify passengers belonging to different patterns, helping us to better understand the origin of different mobility patterns and provide guidance for emergency management of large crowds.

Cultural Clues to the Middle Eastern Student. Occasional Paper No. 2.

Science.gov (United States)

Parker, Orin D.; And Others

This paper discusses characteristics common to all Middle Eastern students with the exception of Israelis, and addresses itself to those working with Middle Eastern students on American college and university campuses. Middle Eastern students will show themselves to be highly adaptable, but they may demonstrate a formality of manner, particularly…

Punjabis Learning English: Word Order. TEAL Occasional Papers, Vol. l, 1977.

Science.gov (United States)

Seesahai, Maureen

When teaching English as a second language to speakers of Punjabi, it is useful for the teacher to have some knowledge of the students' native language. This paper analyzes the differences in word order between English and Punjabi. The five basic sentence patterns in English are contrasted with the equivalent sentence patterns in Punjabi.…

Icelandic: Linguistic Maintenance or Change? The Role of English. Occasional Paper.

Science.gov (United States)

Hilmarsson-Dunn, Amanda

The Icelandic language has a long and stable history, and Old Icelandic is still accessible to modern day Icelanders. This is despite being ruled from Denmark, with influence by the Danish language, for about 500 years. Icelandic may now be under a more serious threat from the onslaught of English. This paper evaluates the linguistic situation in…

The Teacher as Colleague in Classroom Research. Occasional Paper No. 4.

Science.gov (United States)

Florio, Susan; Walsh, Martha

This paper traces the evolving relationship of a teacher and a researcher who shared life in a kindergarten/first-grade classroom for an academic year. Their relationship became the basis for new ways of thinking about the social and academic competencies of children in the classroom, and for new ways of thinking about the aims and conduct of…

Teasing apart the effect of visibility and physical co-presence to examine the effect of CMC on interpersonal attraction

NARCIS (Netherlands)

Croes, Emmelyn; Antheunis, Marjolijn; Schouten, Alexander; Krahmer, Emiel

2016-01-01

This study analyzed the possible difference in interpersonal attraction between communicators in cue-rich computer-mediated communication (CMC) and face-to-face (FtF) communication. The first aim was to determine whether physical co-presence and visibility may account for differences in

TU-AB-BRC-02: Accuracy Evaluation of GPU-Based OpenCL Carbon Monte Carlo Package (goCMC) in Biological Dose and Microdosimetry in Comparison to FLUKA Simulations

Energy Technology Data Exchange (ETDEWEB)

Taleei, R; Peeler, C; Qin, N; Jiang, S; Jia, X [UT Southwestern Medical Center, Dallas, TX (United States)

2016-06-15

Purpose: One of the most accurate methods for radiation transport is Monte Carlo (MC) simulation. Long computation time prevents its wide applications in clinic. We have recently developed a fast MC code for carbon ion therapy called GPU-based OpenCL Carbon Monte Carlo (goCMC) and its accuracy in physical dose has been established. Since radiobiology is an indispensible aspect of carbon ion therapy, this study evaluates accuracy of goCMC in biological dose and microdosimetry by benchmarking it with FLUKA. Methods: We performed simulations of a carbon pencil beam with 150, 300 and 450 MeV/u in a homogeneous water phantom using goCMC and FLUKA. Dose and energy spectra for primary and secondary ions on the central beam axis were recorded. Repair-misrepair-fixation model was employed to calculate Relative Biological Effectiveness (RBE). Monte Carlo Damage Simulation (MCDS) tool was used to calculate microdosimetry parameters. Results: Physical dose differences on the central axis were <1.6% of the maximum value. Before the Bragg peak, differences in RBE and RBE-weighted dose were <2% and <1%. At the Bragg peak, the differences were 12.5% caused by small range discrepancy and sensitivity of RBE to beam spectra. Consequently, RBE-weighted dose difference was 11%. Beyond the peak, RBE differences were <20% and primarily caused by differences in the Helium-4 spectrum. However, the RBE-weighted dose agreed within 1% due to the low physical dose. Differences in microdosimetric quantities were small except at the Bragg peak. The simulation time per source particle with FLUKA was 0.08 sec, while goCMC was approximately 1000 times faster. Conclusion: Physical doses computed by FLUKA and goCMC were in good agreement. Although relatively large RBE differences were observed at and beyond the Bragg peak, the RBE-weighted dose differences were considered to be acceptable.

A CMC database for use in the next generation launch vehicles (rockets)

Science.gov (United States)

Mahanta, Kamala

1994-01-01

Ceramic matrix composites (CMC's) are being envisioned as the state-of-the-art material capable of handling the tough structural and thermal demands of advanced high temperature structures for programs such as the SSTO (Single Stage to Orbit), HSCT (High Speed Civil Transport), etc. as well as for evolution of the industrial heating systems. Particulate, whisker and continuous fiber ceramic matrix (CFCC) composites have been designed to provide fracture toughness to the advanced ceramic materials which have a high degree of wear resistance, hardness, stiffness, and heat and corrosion resistance but are notorious for their brittleness and sensitivity to microscopic flaws such as cracks, voids and impurity.

Teaching Writing: Some Perennial Questions and Some Possible Answers. Occasional Paper No. 85.

Science.gov (United States)

Florio-Ruane, Susan; Dunn, Saundra

Based on the premise that writing research will be useful to educators only to the extent that it offers them conceptual tools to use in framing and solving their own problems, this paper reviews studies that address educators' perennial concerns about writing instruction. Among the questions addressed in the paper are those concerning (1) the…

Potential of L-fucose isolated from Brown Seaweeds as Promising Natural Emulsifier compare to Carboxymethyl Cellulose (CMC)

Science.gov (United States)

Al-Baarri, A. N.; Legowo, A. M.; Widayat; Abduh, S. B. M.; Lestari, F. P.; Desnasari, D.; Santoso, I. P. M.

2018-02-01

L-fucose has been understood as sulfated polysaccharides and it could be extracted and fractionated from brown algae. These polysaccharides contains carbohydrate, sulfate, and protein that may be used as emulsifier. This research was aimed to study the emulsification properties of L-fucose through the determination of total dissolved solids (TDS), color CIE L*a*b* and stability of oil-in-water emulsion. As much as 0.5% of high concentrated L-fucose and 0.5% of carboxymethyl cellulose (CMC) were used as emulsifier in a 10% (v/v) oil-in-water (O/W) emulsion. The emulsifier was added to O/W emulsions and then heated at 72°C. Result of stability emulsion and TDS showed that L-fucose was comparable to the CMC but remarkable changed the color of O/W emulsion. Heating process significantly reduced the stability O/W emulsion when L-fucose was applied. As conclusion, L-fucose might be used as natural emulsifier in O/W emulsion but in the low heat treatment of food processing. This study may provide valuable information for utilizing natural emulsifier from abundant resources from nature.

Risk Management: An Analysis of Issues in Islamic Financial Industry (Occasional Paper)

OpenAIRE

Khan, Tariqullah; Ahmed, Habib

2001-01-01

The paper discusses a number of risk management issues of the Islamic financial industry. It outlines the risk management processes and techniques that enable financial institutions to control undesirable risks and to take benefit of the business opportunities created by the desirable ones.

Action in External Studies. Division of External Studies Occasional Papers No. 2.

Science.gov (United States)

Riverina Coll. of Advanced Education, Wagga Wagga, New South Wales (Australia).

Developments in distance education are addressed in four papers. In "A Practical Winery Experience," Malcolm Allen discusses Riverina College of Advanced Education's Bachelor of Applied Science (wine science) course, which is vocationally oriented, mainly enrolls students from the wine industry, and primarily uses correspondence study.…

Occasional head of flexor pollicis longus muscle: a study of its morphology and clinical significance.

Directory of Open Access Journals (Sweden)

Hemmady M

1993-01-01

Full Text Available A cadaveric dissection study of 54 upper extremities to determine the incidence of occurrence, morphology and relations of the occasional head of the flexor pollicis longus muscle is presented. The occasional head of the flexor pollicis longus muscle was found to be present more frequently (66.66% than absent. It mainly arose from the medical epicondyle of the humerus (55.55% and the medial border of the coronoid process of the ulna (16.66%. It was found to be in close association with the median nerve (anteriorly and the anterior interosseous nerve (posteriorly. The clinical implications of these findings are discussed viz. entrapment neuropathies of the median and anterior interosseous nerves, cicatricial contraction of the occasional head leading to flexion deformity of the thumb and the likely necessity to lengthen/release the occasional head in spastic paralysis of the flexor pollicis longus muscle.

A Curriculum for Logical Thinking. NAAESC Occasional Papers, Volume 1, Number 4.

Science.gov (United States)

Charuhas, Mary S.

The purpose of this paper is to demonstrate methods for developing cognitive processes in adult students. It discusses concept formation and concept attainment, problem solving (which involves concept formation and concept attainment), Bruner's three stages of learning (enactive, iconic, and symbolic modes), and visual thinking. A curriculum for…

Problem-Based Learning: Student Engagement, Learning and Contextualized Problem-Solving. Occasional Paper

Science.gov (United States)

Mossuto, Mark

2009-01-01

The adoption of problem-based learning as a teaching method in the advertising and public relations programs offered by the Business TAFE (Technical and Further Education) School at RMIT University is explored in this paper. The effect of problem-based learning on student engagement, student learning and contextualised problem-solving was…

Barriers to Innovation--A Seminar Report. Occasional Paper InTER/11/89.

Science.gov (United States)

Rhodes, Valerie

This report is based on discussions and papers circulated at a seminar on barriers to innovation in primary schools. Issues that relate to computers and the teacher are discussed in the first section, including ownership of the technology and models and strategies for inservice teacher education. Focusing on issues pertaining to computers and the…

Occasional, obligatory, and habitual stone tool use in hominin evolution.

Science.gov (United States)

Shea, John J

2017-09-01

Archeologists have long assumed that earlier hominins were obligatory stone tool users. This assumption is deeply embedded in traditional ways of describing the lithic record. This paper argues that lithic evidence dating before 1.7 Ma reflects occasional stone tool use, much like that practiced by nonhuman primates except that it involved flaked-stone cutting tools. Evidence younger than 0.3 Ma is more congruent with obligatory stone tool use, like that among recent humans. The onset of habitual stone tool use at about 1.7 Ma appears correlated with increased hominin logistical mobility (carrying things). The onset of obligatory stone tool use after 0.3 Ma may be linked to the evolution of spoken language. Viewing the lithic evidence dating between 0.3-1.7 Ma as habitual stone tool use explains previously inexplicable aspects of the Early-Middle Pleistocene lithic record. © 2017 Wiley Periodicals, Inc.

Wildfire Dynamics and Occasional Precipitation during Active Fire Season in Tropical Lowland of Nepal

Directory of Open Access Journals (Sweden)

Krishna Bahadur Bhujel

2017-10-01

Full Text Available Occasional precipitation plays a vital role in reducing the effect of wildfire. This precipitation is especially important for countries like Nepal, where wildfires are a common seasonal event. Approximately 0.1 million hectare of forest area is affected annually due to wildfires in active fire season. The study on the relation of these forms of occasional precipitation with wildfire incidence is still lacking. This research was objectively carried out to examine the correlation of occasional precipitation with wildfire incidence and burnt area. The Moderate Resolution Imaging Spector-Radiometer (MODIS satellite images and precipitation records for 15 years gathered from Department of Hydrology and Metrology were used as input data for this study. The images were analyzed by using ArcGIS function while the precipitation records were analyzed by using Statistical Package for the Social Science (SPSS program. The linear regression model was applied to find correlation of occasional precipitation with wildfire incidence and burnt area. Analysis revealed decreasing trend of precipitation in study area. We found significant correlation (p<0.05 of precipitation with wildfire incidence and burnt area. Findings will be useful for policy makers, implementers and researchers to manage wildfire in sustainable basis.

Stanford Occasional Papers in Linguistics, No. 3. Papers from the Annual California Linguistics Conference (3rd, May 5-6, 1973).

Science.gov (United States)

Gee, James Paul, Ed.; And Others

This volume includes 12 of the 24 papers presented at the Third Annual California Linguistics Conference. Selections are drawn from each of the four sessions, covering semantic and lexical structure, phonology, syntax, and language in context. Each of the papers includes a bibliography, as well as diagrams, charts, and appendixes when necessary.…

Förster Resonance Energy Transfer (FRET) from Triton X-100 to 4-benzothiazol-2-yl-phenol: Varying FRET efficiency with CMC of the donor (Triton X-100)

International Nuclear Information System (INIS)

Paul, Bijan Kumar; Ganguly, Aniruddha; Karmakar, Saswati; Guchhait, Nikhil

2013-01-01

A heterocyclic compound viz., 4-benzothiazol-2-yl-phenol (4B2YP) has been synthesized and its photophysics have been examined through steady-state absorption, emission and time resolved emission spectroscopic techniques, in brief. Then 4B2YP has been exploited as an acceptor in the Förster Resonance Energy Transfer (FRET) process from photoexcited benzene aromatic nucleus of Triton X-100 (TX-100) surfactant. Dependence of the energy transfer efficiency on the donor concentration with respect to its critical micelle concentration (CMC) is clearly reflected in the study. High values of Stern–Volmer constant (K SV ) for quenching of the donor fluorescence in the presence of the acceptor suggest the operation of long-range dipole–dipole interaction in the course of energy transfer process, while the inference is aptly supported from time resolved fluorescence decay results. Experimental results show maximum FRET efficiency at the CMC of the donor (TX-100). -- Highlights: • FRET from neutral surfactant Triton X-100 to chromophore 4-benzothiazol-2-yl-phenol. • Steady state and time resolved spectroscopy. • Long-range dipole–dipole interaction responsible for FRET. • FRET efficiency as a measure of CMC of surfactant

Förster Resonance Energy Transfer (FRET) from Triton X-100 to 4-benzothiazol-2-yl-phenol: Varying FRET efficiency with CMC of the donor (Triton X-100)

Energy Technology Data Exchange (ETDEWEB)

Paul, Bijan Kumar, E-mail: bijan.paul.chem.cu@gmail.com [Department of Chemistry, University of Calcutta, 92 A.P.C. Road, Calcutta 700009 (India); Ganguly, Aniruddha [Department of Chemistry, University of Calcutta, 92 A.P.C. Road, Calcutta 700009 (India); Karmakar, Saswati [Department of Chemistry, Sree Chaitanya College, Habra, North 24 Parganas (India); Guchhait, Nikhil, E-mail: nguchhait@yahoo.com [Department of Chemistry, University of Calcutta, 92 A.P.C. Road, Calcutta 700009 (India)

2013-11-15

A heterocyclic compound viz., 4-benzothiazol-2-yl-phenol (4B2YP) has been synthesized and its photophysics have been examined through steady-state absorption, emission and time resolved emission spectroscopic techniques, in brief. Then 4B2YP has been exploited as an acceptor in the Förster Resonance Energy Transfer (FRET) process from photoexcited benzene aromatic nucleus of Triton X-100 (TX-100) surfactant. Dependence of the energy transfer efficiency on the donor concentration with respect to its critical micelle concentration (CMC) is clearly reflected in the study. High values of Stern–Volmer constant (K{sub SV}) for quenching of the donor fluorescence in the presence of the acceptor suggest the operation of long-range dipole–dipole interaction in the course of energy transfer process, while the inference is aptly supported from time resolved fluorescence decay results. Experimental results show maximum FRET efficiency at the CMC of the donor (TX-100). -- Highlights: • FRET from neutral surfactant Triton X-100 to chromophore 4-benzothiazol-2-yl-phenol. • Steady state and time resolved spectroscopy. • Long-range dipole–dipole interaction responsible for FRET. • FRET efficiency as a measure of CMC of surfactant.

Effects of salinity, P H and temperature on CMC polymer and X C polymer performance

International Nuclear Information System (INIS)

Ghassem Alaskari, M. K.; Nickdel Teymoori, Reza

2007-01-01

The rheological and filtration properties of drilling mud under down-hole conditions may be very different from those measured at ambient pressures and temperatures at the surface. This paper presents the results of an experimental investigation into the temperature and salinity and p H effects on drilling mud rheological and filtration properties. Results are given from tests on water base mud containing CMC polymer and X C polymer. Drilling fluid was investigated at three different temperatures (21.1 d eg C , 48.9 d eg C , 80 d eg C ) containing 8.165 kg/b bl bentonite. The drilling mud salinities in this study were fresh water (Ahwaz water: ppm: 400, Hardness: 120). 2000 ppm, 4000 ppm, 8000 ppm and 40000 ppm. It was found that p H of drilling mud should be kept at range of 8-10, because increasing p H of drilling mud will increase its rheological properties. The salinity and temperature effects show that as the salinity and temperature of drilling mud are increased the effectiveness of polymers in drilling mud will decreased. Moreover, they have a negative effect on filtration properties of drilling mud. In suspensions of sodium montmorillonite that are well dispersed and have low gel strength, both plastic viscosity and yield point decrease with increasing temperature

Information Technology in Education Research Programme, 1988-93. Occasional Paper InTER/1/88.

Science.gov (United States)

Lewis, R.

This paper describes the new phase of the Economic and Social Research Council (ESRC) initiative in Information Technology in Education for the period 1988-93. The first sections of the paper discuss the rationale and framework of the program as a whole, followed by outlines of the initial programs of research started in autumn 1988 to investigate…

Peer Evaluation in CMC Learning Environment and Writing Skill

Directory of Open Access Journals (Sweden)

Morteza Mellati

2014-09-01

Full Text Available Peer evaluation and technology-based instruction as the various domains of language teaching perspectives might affect language development. Group work in a technology-based environment might be more successful when learners are involved in developing the assessment process particularly peer assessment. This study investigated the effectiveness of peer evaluation in technology-based language environment and its effects on English writing ability. To reach this goal, 70 Iranian learners were participated in English language writing context. They were divided into two groups, one group assigned to CMC (Computer-Mediated Communication language learning context and the other assigned to a traditional learning environment. Both groups were encouraged to evaluate their classmates’ writing tasks. In addition, interviews were conducted with two learners. Comparing these two groups provides comprehensive guidelines for teachers as well as curriculum designers to set adjusted writing language environment for more effective and creative language teaching and learning. E-collaboration classroom tasks have high intrinsic motivation as well as significant effects on learners’ outcomes. Cooperative tasks specifically in technology-based environment lead learners to group working and consequently group learning. Computer-Mediated Communication is meaningful, especially in contexts in which teachers stimulate group work activities.

Cooperative Monitoring Center Occasional Paper/7: A Generic Model for Cooperative Border Security

Energy Technology Data Exchange (ETDEWEB)

Netzer, Colonel Gideon

1999-03-01

This paper presents a generic model for dealing with security problems along borders between countries. It presents descriptions and characteristics of various borders and identifies the threats to border security, while emphasizing cooperative monitoring solutions.

Utilización de lactosuero de queso fresco en la elaboración de una bebida fermentada con adición de pulpa maracuyá (passiflora edulis) variedad púrpura y carbóximetil celulosa (cmc), enriquecida con vitaminas A y D.

OpenAIRE

Sepúlveda Valencia José Uriel; Flórez Flórez Luis Eduardo; Peña Álvarez Claudia Milena

2002-01-01

Se puede obtener una bebida con características especiales a partir de la fermentación de suero de queso fresco, en presencia de Streptococcus thermophillus y Lactobacillus bulgaricus, comparable con un yogur tradicional. Se utilizaron 150 kg de lactosuero de queso fresco, a cada muestra de 50 kg se le aplicó un tratamiento con estabilizantes comerciales cuya base es carboximetilcelulosa (CMC 27 FG, CMC 28FG y CMC 29FG), cuya función es conferir viscosidad. La bebida que se desarrolló a...

Discharge estimation combining flow routing and occasional measurements of velocity

Directory of Open Access Journals (Sweden)

G. Corato

2011-09-01

Full Text Available A new procedure is proposed for estimating river discharge hydrographs during flood events, using only water level data at a single gauged site, as well as 1-D shallow water modelling and occasional maximum surface flow velocity measurements. One-dimensional diffusive hydraulic model is used for routing the recorded stage hydrograph in the channel reach considering zero-diffusion downstream boundary condition. Based on synthetic tests concerning a broad prismatic channel, the "suitable" reach length is chosen in order to minimize the effect of the approximated downstream boundary condition on the estimation of the upstream discharge hydrograph. The Manning's roughness coefficient is calibrated by using occasional instantaneous surface velocity measurements during the rising limb of flood that are used to estimate instantaneous discharges by adopting, in the flow area, a two-dimensional velocity distribution model. Several historical events recorded in three gauged sites along the upper Tiber River, wherein reliable rating curves are available, have been used for the validation. The outcomes of the analysis can be summarized as follows: (1 the criterion adopted for selecting the "suitable" channel length based on synthetic test studies has proved to be reliable for field applications to three gauged sites. Indeed, for each event a downstream reach length not more than 500 m is found to be sufficient, for a good performances of the hydraulic model, thereby enabling the drastic reduction of river cross-sections data; (2 the procedure for Manning's roughness coefficient calibration allowed for high performance in discharge estimation just considering the observed water levels and occasional measurements of maximum surface flow velocity during the rising limb of flood. Indeed, errors in the peak discharge magnitude, for the optimal calibration, were found not exceeding 5% for all events observed in the three investigated gauged sections, while the

Drainage Behavior in Soap Films Above and Below the CMC

Science.gov (United States)

Berg, S.; Adelizzi, E. A.; Troian, S. M.

2003-11-01

We investigate through laser interferometry the drainage behavior of Newtonian soap films initially entrained on a fiber frame at small and constant capillary number. The initial film thickness is sufficiently small that gravitational drainage is presumed minimal. The drainage of rigid soap films by capillary forces alone should proceed according to h(t) ˜ t^- 1/2. Our experimental results show much more rapid drainage with exponents as large as -2, especially for those solutions whose surfactant concentrations are below the CMC. Video recordings of the entire film surface reveal a variety of structures during the drainage process, some attributable to marginal regeneration. Though still a controversial issue, this regeneration process is believed to be caused by surfactant accumulation in the meniscus region (1). We show that modification of the relevant capillary drainage equation to account for Marangoni effects through a course-grained slip condition at the air-liquid interface produces exponents in better agreement with experimental findings. (1) V. A. Nierstrasz and G. Frens, JCIS 215, 28 (1999).

Using naturalistic driving data to identify variables associated with infrequent, occasional, and consistent seat belt use.

Science.gov (United States)

Reagan, Ian J; McClafferty, Julie A; Berlin, Sharon P; Hankey, Jonathan M

2013-01-01

Seat belt use is one of the most effective countermeasures to reduce traffic fatalities and injuries. The success of efforts to increase use is measured by road side observations and self-report questionnaires. These methods have shortcomings, with the former requiring a binary point estimate and the latter being subjective. The 100-car naturalistic driving study presented a unique opportunity to study seat belt use in that seat belt status was known for every trip each driver made during a 12-month period. Drivers were grouped into infrequent, occasional, or consistent seat belt users based on the frequency of belt use. Analyses were then completed to assess if these groups differed on several measures including personality, demographics, self-reported driving style variables as well as measures from the 100-car study instrumentation suite (average trip speed, trips per day). In addition, detailed analyses of the occasional belt user group were completed to identify factors that were predictive of occasional belt users wearing their belts. The analyses indicated that consistent seat belt users took fewer trips per day, and that increased average trip speed was associated with increased belt use among occasional belt users. The results of this project may help focus messaging efforts to convert occasional and inconsistent seat belt users to consistent users. Copyright © 2012 Elsevier Ltd. All rights reserved.

Utilización de lactosuero de queso fresco en la elaboración de una bebida fermentada con adición de pulpa maracuyá (passiflora edulis) variedad púrpura y carbóximetil celulosa (cmc), enriquecida con vitaminas a y d.

OpenAIRE

Sepúlveda Valencia, José Uriel; Flórez Flórez, Luis Eduardo; Peña Álvarez, Claudia Milena

2011-01-01

Se puede obtener una bebida con características especiales a partir de la fermentación de suero de queso fresco, en presencia de Streptococcus thermophillus y Lactobacillus bulgaricus, comparable con un yogur tradicional. Se utilizaron 150 kg de lactosuero de queso fresco, a cada muestra de 50 kg se le aplicó un tratamiento con estabilizantes comerciales cuya base es carboximetilcelulosa (CMC 27 FG, CMC 28FG y CMC 29FG), cuya función es conferir viscosidad. La bebida que se desarrolló a p...

The cmc-value of a bolalipid with two phosphocholine headgroups and a C24 alkyl chain: Unusual binding properties of fluorescence probes to bolalipid aggregates.

Science.gov (United States)

Kordts, Martin; Kerth, Andreas; Drescher, Simon; Ott, Maria; Blume, Alfred

2017-09-01

Bolalipids with a long alkyl chain and two phosphocholine polar groups self-assemble in water into two different types of aggregate structures, namely helical nanofibers at low temperature and two types of micellar aggregates at higher temperature. We tried to determine the critical aggregation concentration (cac) or critical micellar concentration (cmc) of the bolalipid tetracosane-1,24-bis(phosphocholine) (PC-C24-PC) by using different fluorescent probes. The use of pyrene or pyrene derivatives as fluorophores failed, whereas the probes 1,8-ANS and particularly bis-ANS gave consistent results. The structure of the bolalipid aggregates obviously hinders partitioning or binding of pyrene derivatives into the micellar interior, whereas 1,8-ANS and bis-ANS can bind to the surface of the aggregate structures. The observed large increase in fluorescence intensity of bis-ANS indicates that binding to the hydrophobic surface of the aggregates leads to a reduction of the dye mobility. However, binding of bis-ANS is relatively weak, so that the determination of a cac/cmc-value is difficult. Simulations of the intensity curves for PC-C24-PC lead to estimates of the cac/cmc-value of 0.3-1.0×10 -6 M, depending on the structure of the aggregates. Single molecule fluorescence correlation spectroscopy was used to determine the mobility of bis-ANS as a function of concentration of PC-C24-PC. The dye diffusion time and the molecular brightness are lower at low bolalipid concentration, when only free dye is present, and increase at higher concentration when bis-ANS is bound to the aggregates. The experimental cac/cmc-values are higher than those estimated, using an incremental method for the change in Gibbs free energy for micellization with n-alkyl-phosphocholines with only one polar group as a comparison. Apparently, for PC-C24-PC in micellar or fibrous aggregates, more CH 2 groups are exposed to water than in a conventional micelle of an n-alkyl-phosphocholine. Copyright �

PMU - One Year After. Occasional Paper 2.

Science.gov (United States)

Fielden, J.

The rationale and objectives of a 1973 report, entitled "Planning and Management in Universities" (PMU), is described, followed by a discussion of the problems of introducing business concepts into universities. Problems facing organizations that introduce management innovations are examined: life cycle of an innovation; visible cost and…

Redesigning Federal Grant Programs. Occasional Paper #24.

Science.gov (United States)

McLoone, Eugene P.

When taxation is based on ability to pay and programs are targeted at a minimum service level, every state with any population that requires the service must participate. States and localities receive grants only because groups and individuals are to be treated equally. The role of the recipient government is the provision of the minimum…

Immigrants and Refugees: The Caribbean and South Florida. Occasional Papers Series, Dialogues #2.

Science.gov (United States)

Florida International Univ., Miami. Latin American and Caribbean Center.

Six papers on Caribbean immigrants and refugees in south Florida are presented in this document. Their titles (and authors) are: (1) "Let's Welcome the Refugees" (Bryan O. Walsh); (2) "The Haitians and America's 'Pull'" (Anthony P. Maingot); (3) "Estimates of Haitian International Migration for the 1950-1980 Period"…

Building Capability in Vocational Education and Training Providers: The TAFE Cut. Occasional Paper

Science.gov (United States)

Guthrie, Hugh; Clayton, Berwyn

2010-01-01

This paper focuses on issues which affect the capability of technical and further education (TAFE) providers to meet their clients' and stakeholders' needs and draws extensively on the reports of the consortium research program which examined ways to help build vocational education and training (VET) provider and workforce capability. The paper…

Chicago Business Leadership and School Reform. Supporting Leaders for Tomorrow, Occasional Paper #3.

Science.gov (United States)

Bednarik, David

Chicago's city leaders, unlike other city leaders, are going after fundamental and radical restructuring of the nation's third largest school system, but have found that it is hard to achieve. This paper provides a snapshot of the growing political involvement of Chicago's business leadership with the city's troubled school system. The need for…

Detroit Business Leadership and Educational Change. Supporting Leaders for Tomorrow, Occasional Paper #7.

Science.gov (United States)

Spratling, Cassandra

The growing proclivity of business leaders in some urban communities to become more deeply involved in the complex and politically volatile issue of school governance is assessed in this paper. The troubles facing Detroit public schools include a high dropout rate, illiteracy of graduates, and bad management of money and resources. In 1988,…

Synthesis and controlling the optical and dielectric properties of CMC/PVA blend via γ-rays irradiation

Energy Technology Data Exchange (ETDEWEB)

El Sayed, A.M., E-mail: ams06@fayoum.edu.eg

2014-02-15

Highlights: • PVA/CMC blend films were prepared by solution casting method. • The films were irradiated with γ-rays at the dose range of 0–70 kGy. • UV-vis spectroscopy was performed to study the changes in the optical properties. • The influence of γ-rays irradiation on the dielectric relaxation was studied. -- Abstract: Carboxymethyl cellulose (CMC)/Polyvinyl alcohol (PVA) blend films were prepared by solution casting method. Then, these films were irradiated with γ-rays from a Co-60 source at doses over the range 0–70 kGy to investigate the modifications induced in the optical and dielectric properties. The dielectric constant (ε′) was measured in the temperature range 303–408 K and in the frequency range 10 kHz–1 MHz. The indirect optical band gap was found to increase within the dose range 0–10 kGy, and to decrease at the higher doses. The refractive index values, however, showed a reversed behavior. The highest transmittance percentage was obtained at 10 kGy dose. According to the frequency and temperature dependence of ε′, α- relaxation peaks were observed in all samples and assigned to the micro-Brownian motion of the blend chains. The values of ε′ showed a decrease in the dose range 0–10 kGy and an increase in the dose range 10–70 kGy. The ac conductivity σ{sub ac} (T) showed an Arrhenius type behavior separated into two distinct regions. The results of the present system are compared with those of similar materials.

Synthesis and controlling the optical and dielectric properties of CMC/PVA blend via γ-rays irradiation

International Nuclear Information System (INIS)

El Sayed, A.M.

2014-01-01

Highlights: • PVA/CMC blend films were prepared by solution casting method. • The films were irradiated with γ-rays at the dose range of 0–70 kGy. • UV-vis spectroscopy was performed to study the changes in the optical properties. • The influence of γ-rays irradiation on the dielectric relaxation was studied. -- Abstract: Carboxymethyl cellulose (CMC)/Polyvinyl alcohol (PVA) blend films were prepared by solution casting method. Then, these films were irradiated with γ-rays from a Co-60 source at doses over the range 0–70 kGy to investigate the modifications induced in the optical and dielectric properties. The dielectric constant (ε′) was measured in the temperature range 303–408 K and in the frequency range 10 kHz–1 MHz. The indirect optical band gap was found to increase within the dose range 0–10 kGy, and to decrease at the higher doses. The refractive index values, however, showed a reversed behavior. The highest transmittance percentage was obtained at 10 kGy dose. According to the frequency and temperature dependence of ε′, α- relaxation peaks were observed in all samples and assigned to the micro-Brownian motion of the blend chains. The values of ε′ showed a decrease in the dose range 0–10 kGy and an increase in the dose range 10–70 kGy. The ac conductivity σ ac (T) showed an Arrhenius type behavior separated into two distinct regions. The results of the present system are compared with those of similar materials

Konut Transformasyonu Bağlamında Lefke’deki CMC Evlerinin Zaman İçerisindeki Dönüşümü / The Gradual Transformation of CMC Houses in Lefke within the Context of Housing Transformation

Directory of Open Access Journals (Sweden)

Çağla Beyaz

2017-06-01

Full Text Available Abstract This study aims to determine the reflections of the factors affecting the gradual change of the houses constructed for the American mining company CMC (Cyprus Mines Corporation in Lefke between 1916 and 1974. Research has shown that such factors as life standards, needs, politics, environmental factors, climate, geography and cultural factors have changed the housing demand. Having taken all these factors into consideration, we have reached a conclusion regarding the transformation of the houses by analysing the collected data by field research techniques appropriate to CMC houses in Lefke. The field research has been conducted by taking samples from each category and analysing them; and the gradual transformation and the underlying environmental factors have been determined. The field research techniques used in the study are interviews, photos, relieves and archive research. In the result obtained from the general work; Along with the rapid development caused by the effects of the Industrial Revolution, religious, cultural, economical, political and architectural conditions have been shaped in different forms and values. Along with these circumstances, the changes and transformations that observed in the world and affecting the cities have also affected Cyprus Island. In the Lefke region, along with the establishment of the CMC, the positive and negative effects of the terraced houses, built for the first time in Cyprus in four different categories and their close surroundings, draw quite attention. In the study, the transformations of these houses until today and the factors affecting them have been also determined. Öz Çalışma, Lefke Bölgesinde 1916-1974 yılları arasında faaliyet gösteren Amerikan maden şirketi CMC (Cyprus Mines Corporation için yapılmış olan konutların zaman içerisindeki form değişimine etki eden faktörlerin, konut mekânına olan etkilerini saptamaya yöneliktir. Konut ihtiyacının, yaşam �

A Chemically Modified Curcumin (CMC 2.24) Inhibits Nuclear Factor κB Activation and Inflammatory Bone Loss in Murine Models of LPS-Induced Experimental Periodontitis and Diabetes-Associated Natural Periodontitis.

Science.gov (United States)

Elburki, Muna S; Rossa, Carlos; Guimarães-Stabili, Morgana R; Lee, Hsi-Ming; Curylofo-Zotti, Fabiana A; Johnson, Francis; Golub, Lorne M

2017-08-01

The purpose of this study was to assess the effect of a novel chemically modified curcumin (CMC 2.24) on NF-κB and MAPK signaling and inflammatory cytokine production in two experimental models of periodontal disease in rats. Experimental model I: Periodontitis was induced by repeated injections of LPS into the gingiva (3×/week, 3 weeks); control rats received vehicle injections. CMC 2.24, or the vehicle, was administered by daily oral gavage for 4 weeks. Experimental model II: Diabetes was induced in adult male rats by streptozotocin injection; periodontal breakdown then results as a complication of uncontrolled hyperglycemia. Non-diabetic rats served as controls. CMC 2.24, or the vehicle, was administered by oral gavage daily for 3 weeks to the diabetics. Hemimaxillae and gingival tissues were harvested, and bone loss was assessed radiographically. Gingival tissues were pooled according to the experimental conditions and processed for the analysis of matrix metalloproteinases (MMPs) and bone-resorptive cytokines. Activation of p38 MAPK and NF-κB signaling pathways was assessed by western blot. Both LPS and diabetes induced an inflammatory process in the gingival tissues associated with excessive alveolar bone resorption and increased activation of p65 (NF-κB) and p38 MAPK. In both models, the administration of CMC 2.24 produced a marked reduction of inflammatory cytokines and MMPs in the gingival tissues, decreased bone loss, and decreased activation of p65 (NF-κB) and p38 MAPK. Inhibition of these cell signaling pathways by this novel tri-ketonic curcuminoid (natural curcumin is di-ketonic) may play a role in its therapeutic efficacy in locally and systemically associated periodontitis.

Blue-yellow colour vision impairment and cognitive deficits in occasional and dependent stimulant users.

Science.gov (United States)

Hulka, Lea M; Wagner, Michael; Preller, Katrin H; Jenni, Daniela; Quednow, Boris B

2013-04-01

Specific blue-yellow colour vision impairment has been reported in dependent cocaine users and it was postulated that drug-induced changes in retinal dopamine neurotransmission are responsible. However, it is unclear whether these changes are confined to chronic cocaine users, whether they are specific for dopaminergic stimulants such as cocaine and amphetamine and whether they are related to cognitive functions such as working memory, encoding and consolidation. In 47 occasional and 29 dependent cocaine users, 23 MDMA (commonly known as 'ecstasy') users and 47 stimulant-naive controls, colour vision discrimination was measured with the Lanthony Desaturated Panel D-15 Test and memory performance with the Auditory Verbal Learning Test. Both occasional and dependent cocaine users showed higher colour confusion indices than controls. Users of the serotonergic stimulant MDMA (26%), occasional (30%) and dependent cocaine users (34%) exhibited more frequent blue-yellow colour vision disorders compared to controls (9%). Inferior performance of MDMA users was caused by a subgroup with high amphetamine co-use (55%), while MDMA use alone was not associated with decreased blue-yellow discrimination (0%). Cognitive performance was worse in cocaine users with colour vision disorder compared to users and controls with intact colour vision and both colour vision impairment and cognitive deficits were related to cocaine use. Occasional cocaine and amphetamine use might induce blue-yellow colour vision impairment, whereas the serotonergic stimulant MDMA does not impair colour vision. The association between colour vision impairment and cognitive deficits in cocaine users may reflect that retinal and cerebral dopamine alterations are linked to a certain degree.

"The refer less resolve more" initiative: A five-year experience from CMC Vellore, India

Directory of Open Access Journals (Sweden)

Jachin Velavan

2012-01-01

Full Text Available India′s one billion plus strong population presents huge health care needs. Presently, approximately 250,000 general practitioners and 30,000 Government doctors are a part of the Indian healthcare workforce, but 80% of them are based in urban India. Problems which plague healthcare delivery and attributed to physician practice may be enumerated as - physicians (1 lack competencies, (2 lack updating, (3 prescribe irrationally (pressures from pharmaceutical companies and patients, (4 practice unethically, (5 refer excessively to specialists and other clinical professionals, and (6 investigate for diseases without justification. A multi-competent Family Physician who could provide a single-window, ethical, and holistic healthcare to patients and families is the need of the hour. Therefore, training, equipping, and empowering these 250,000 doctors to become such physicians will reduce health costs considerably. Distance medical education using all the andragogic methods can be used to train large number of individuals without displacing them from their work-places. Distance learning provides a useful interface for rapidly developing a specialized pool of doctors practicing and advocating family medicine as most-needed discipline. This motivated CMC Vellore, a premier institution for medical education in India, to start a the "refer less resolve more initiative" by offering "two year family medicine diploma course" by distance mode. This is an innovatively-written program consisting of problem-based self-learning modules, video-lectures, video-conferencing, and face-to-face contact programs. Ten secondary level hospitals, across the country, under the supervision of national and international family medicine faculty form the pillars of this program. This distance learning program offered by CMC Vellore has become the platform for change as there is special focus is on ethics, rational prescribing, consultation skills, application of family medicine

"The Refer Less Resolve More" Initiative: A Five-year Experience from CMC Vellore, India.

Science.gov (United States)

Velavan, Jachin

2012-01-01

India's one billion plus strong population presents huge health care needs. Presently, approximately 250,000 general practitioners and 30,000 Government doctors are a part of the Indian healthcare workforce, but 80% of them are based in urban India. Problems which plague healthcare delivery and attributed to physician practice may be enumerated as - physicians (1) lack competencies, (2) lack updating, (3) prescribe irrationally (pressures from pharmaceutical companies and patients), (4) practice unethically, (5) refer excessively to specialists and other clinical professionals, and (6) investigate for diseases without justification. A multi-competent Family Physician who could provide a single-window, ethical, and holistic healthcare to patients and families is the need of the hour. Therefore, training, equipping, and empowering these 250,000 doctors to become such physicians will reduce health costs considerably. Distance medical education using all the andragogic methods can be used to train large number of individuals without displacing them from their work-places. Distance learning provides a useful interface for rapidly developing a specialized pool of doctors practicing and advocating family medicine as most-needed discipline. This motivated CMC Vellore, a premier institution for medical education in India, to start a the "refer less resolve more initiative" by offering "two year family medicine diploma course" by distance mode. This is an innovatively-written program consisting of problem-based self-learning modules, video-lectures, video-conferencing, and face-to-face contact programs. Ten secondary level hospitals, across the country, under the supervision of national and international family medicine faculty form the pillars of this program. This distance learning program offered by CMC Vellore has become the platform for change as there is special focus is on ethics, rational prescribing, consultation skills, application of family medicine principles

Análisis psicométrico del Cuestionario de Motivos del Consumo de Alcohol (CMC en escolares de la ciudad de Bogotá

Directory of Open Access Journals (Sweden)

Leonardo Pardo Jaime

2016-07-01

Full Text Available El objetivo del presente estudio consistió en analizar las propiedades psicométricas del Cuestionario de Motivos del Consumo de Alcohol (CMC en escolares de la ciudad de Bogotá. Para ello, se contó con 206 participantes, a quienes se les aplicó el cuestionario. Los resultados fueron objeto de un análisis factorial exploratorio por medio de la extracción de componentes principales, con rotación Varimax, así como de un análisis de confiabilidad por alfa de Cronbach. Los mismos muestran 4 factores con apropiada carga factorial tanto por factor como por reactivo, explicando el 73,359% de la varianza, y un índice de confiabilidad de ,945. Así entonces, el Cuestionario de Motivos del Consumo de Alcohol (CMC presenta una estructura similar a otros estudios, lo que indica que es una escala con adecuada validez de constructo y, por lo tanto, confiable para utilizarse en escolares bogotanos. Abstract The objective of this psychometric study is to analyze the psychometric properties of the Drinking Motives Questionnaire (DMQ in school children in Bogotá city. For this, there were chosen 206 sample participants who were administered the questionnaire, applying an exploratory factor analysis by using a principal component extraction with Varimax rotation, and a Cronbach’s alpha reliability analysis was also performed. The results show four factors with an appropriate factor load, by factor and by reactive, explaining a variance of 73.359% , and a reliability index of 945. The results show that the Drinking motives Questionnaire (CMC show a similar structure in comparison with surveys made in other countries. This indicates an appropriate construct validity, and reliability for its use in school children in Bogotá city.

Characterization of LWRS Hybrid SiC-CMC-Zircaloy-4 Fuel Cladding after Gamma Irradiation

Energy Technology Data Exchange (ETDEWEB)

Isabella J van Rooyen

2012-09-01

The purpose of the gamma irradiation tests conducted at the Idaho National Laboratory (INL) was to obtain a better understanding of chemical interactions and potential changes in microstructural properties of a mock-up hybrid nuclear fuel cladding rodlet design (unfueled) in a simulated PWR water environment under irradiation conditions. The hybrid fuel rodlet design is being investigated under the Light Water Reactor Sustainability (LWRS) program for further development and testing of one of the possible advanced LWR nuclear fuel cladding designs. The gamma irradiation tests were performed in preparation for neutron irradiation tests planned for a silicon carbide (SiC) ceramic matrix composite (CMC) zircaloy-4 (Zr-4) hybrid fuel rodlet that may be tested in the INL Advanced Test Reactor (ATR) if the design is selected for further development and testing

An Update on Design Tools for Optimization of CMC 3D Fiber Architectures

Science.gov (United States)

Lang, J.; DiCarlo, J.

2012-01-01

Objective: Describe and up-date progress for NASA's efforts to develop 3D architectural design tools for CMC in general and for SIC/SiC composites in particular. Describe past and current sequential work efforts aimed at: Understanding key fiber and tow physical characteristics in conventional 2D and 3D woven architectures as revealed by microstructures in the literature. Developing an Excel program for down-selecting and predicting key geometric properties and resulting key fiber-controlled properties for various conventional 3D architectures. Developing a software tool for accurately visualizing all the key geometric details of conventional 3D architectures. Validating tools by visualizing and predicting the Internal geometry and key mechanical properties of a NASA SIC/SIC panel with a 3D orthogonal architecture. Applying the predictive and visualization tools toward advanced 3D orthogonal SiC/SIC composites, and combining them into a user-friendly software program.

Factors associated with occasional and recurrent falls in Mexican community-dwelling older people

Science.gov (United States)

Mino-León, Dolores; Cruz-Arenas, Esteban

2018-01-01

Falls are a frequent event among older adults that can cause wounds, disability, psychological disorders, and premature death. Although the large number of existing studies on the issue, few have been conducted in middle- and low-income countries. The objective of the present study is to identify the sociodemographic, medical, and functional performance factors associated with occasional and recurrent falls in Mexican older adults dwelling in community. Cross-sectional analysis of 9 598 adults ≥60 years old who participated in the fourth round (2015) of the Mexican Health and Aging Study. Bivariate tests were performed to evaluate the differences between covariates by distinct fall groups (no falls, occasional falls, and recurrent falls). Multiple logistic regressions with unadjusted and adjusted models were estimated. Approximately 46% of older adults had had at least one fall during the previous two years (one fall 16% and recurrent falls 30%). Occasional falls were only associated with being a woman; in addition to the sex, recurrent falls were strongly associated with advanced age, rural residence, bad and very bad self-perception of health status, activity-limiting pain, urinary incontinence, depression, arthritis, limitations in basic activities of daily living, and limitations in advanced activities of daily living. Falls, primarily recurrent falls, deserve to be addressed through multifactorial strategies that include different areas of intervention. PMID:29462159

Factors associated with occasional and recurrent falls in Mexican community-dwelling older people.

Directory of Open Access Journals (Sweden)

Marcela Agudelo-Botero

Full Text Available Falls are a frequent event among older adults that can cause wounds, disability, psychological disorders, and premature death. Although the large number of existing studies on the issue, few have been conducted in middle- and low-income countries. The objective of the present study is to identify the sociodemographic, medical, and functional performance factors associated with occasional and recurrent falls in Mexican older adults dwelling in community. Cross-sectional analysis of 9 598 adults ≥60 years old who participated in the fourth round (2015 of the Mexican Health and Aging Study. Bivariate tests were performed to evaluate the differences between covariates by distinct fall groups (no falls, occasional falls, and recurrent falls. Multiple logistic regressions with unadjusted and adjusted models were estimated. Approximately 46% of older adults had had at least one fall during the previous two years (one fall 16% and recurrent falls 30%. Occasional falls were only associated with being a woman; in addition to the sex, recurrent falls were strongly associated with advanced age, rural residence, bad and very bad self-perception of health status, activity-limiting pain, urinary incontinence, depression, arthritis, limitations in basic activities of daily living, and limitations in advanced activities of daily living. Falls, primarily recurrent falls, deserve to be addressed through multifactorial strategies that include different areas of intervention.

A Competent Recovery? Economic Downturn and Australia's Vocational Education and Training System. Occasional Paper

Science.gov (United States)

Sweet, Richard

2009-01-01

Economic downturns have a particularly strong impact upon new entrants to the labour market. These can include recently arrived migrants and refugees, women returning to the labour force after a period of child rearing, and youth. This paper reflects on the impact of the recent financial crisis on particular groups in Australian society and…

The Lessons of the PFF Concerning the Job Market. Preparing Future Faculty. Occasional Paper.

Science.gov (United States)

DeNeef, A. Leigh

This paper discusses the effectiveness of the Preparing Future Faculty (PFF) program in equipping graduate students for the realities of the academic job market. It reviews the experiences of Duke University (North Carolina) with the PFF program and the effect that PFF has had on preparing graduate students to enter the job market as new faculty.…

Survey report for fiscal 1999. Report on basic survey on joint implementation of installing coal moisture control (CMC) facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of the COP3 joint implementation in fiscal 1999, a survey and discussions were given on installing coal moisture control (CMC) facilities in China. The possibility was discussed with the Jinan Steel Group Company and Shougang Company. The subject is a beehive coke furnace, in which coal containing 11% of water is sent to a fluidized bed dryer, and dried up to 6.6%. Stack gas in the coke furnace is used mainly as the drying heat source. The facility consists of a fluidized bed dryer, a dust collector, a coal transporter, and a stack gas recovering device. The energy saving effects made available to the above two companies are as remarkable as 19,868 tons/year and 12,189 tons/year, respectively, as converted to crude oil, and the greenhouse effect gas reduction effect as 61,476 tons/year and 37,715 tons/year, respectively. Because energy price is low in China, the investment recovery time period is set at six years or less as the limit for economic performance evaluation. As a result of the calculation, the recovery time periods for the above two companies were found to be 4.2 and 4.7 years, proving the CMC project highly promising. It is desired that the project will be moved forward once the issues of the fund raising and the discharge right of global warming gas are made clear. (NEDO)

Authoring Tools for Simulation-Based CBT--an Interim Project Report. Occasional Paper InTER/13/89.

Science.gov (United States)

Lewis, R., Ed.; Mace, Terry, Ed.

This paper describes a project which aims to create an authoring environment for simulation-based training in order to illustrate features necessary for: (1) an environment which can be used by teachers/trainers with minimum technical skills; (2) rapid prototyping by all courseware producers; (3) and tools for model building. The paper begins with…

The Effectiveness of the Traineeship Model. Occasional Paper

Science.gov (United States)

Karmel, Tom; Blomberg, Davinia; Vnuk, Monica

2010-01-01

Over 20 years ago, during a period of high youth unemployment, Peter Kirby recommended that a system of traineeships be adopted for disadvantaged 16- and 17-year-olds. Growth in traineeships was initially slow until the mid-1990s, when rapid growth followed a series of reforms to traineeships. The reforms included the introduction of employer…

Alternative Concepts of School Efficiency. Occasional Paper #18.

Science.gov (United States)

Guthrie, James W.

The conventional concept of educational efficiency, adapted from the technical-industrial sector, is inappropriate for public schools. In the technical industrial sector, there is widespread agreement about the desired outcome: profit. Yet there is very little public agreement about the proper goals of schooling. Even if agreement on goals could…

Accreditation and Student Consumer Protection. An Occasional Paper.

Science.gov (United States)

Jung, Steven M.

The role of postsecondary accreditation and its relation to student consumer protection are discussed in this monograph. The importance of this concept is examined in light of increased marketing efforts on the part of higher education institutions. It is emphasized that students are consumers and their rights should be protected. Possible areas…

Families as Contractual Partners in Education. Occasional Paper.

Science.gov (United States)

Levin, H. M.; Belfield, C. R.

The educational achievements of the young depend on both family and school but are much more dependent on the former than the latter. Educational policy has established an extensive set of legal and contractual obligations for schools. In contrast, the contractual obligation for families is to meet compulsory education requirements. The…

Modeling of the Critical Micelle Concentration (CMC) of Nonionic Surfactants with an Extended Group-Contribution Method

DEFF Research Database (Denmark)

Mattei, Michele; Kontogeorgis, Georgios; Gani, Rafiqul

2013-01-01

, those compounds that exhibit larger correlation errors (based only on first- and second-order groups) are assigned to more detailed molecular descriptions, so that better correlations of critical micelle concentrations are obtained. The group parameter estimation has been performed using a data set......A group-contribution (GC) property prediction model for estimating the critical micelle concentration (CMC) of nonionic surfactants in water at 25 °C is presented. The model is based on the Marrero and Gani GC method. A systematic analysis of the model performance against experimental data...... concentration, and in particular, the quantitative structure−property relationship models, the developed GC model provides an accurate correlation and allows for an easier and faster application in computer-aided molecular design techniques facilitating chemical process and product design....

Utilización de lactosuero de queso fresco en la elaboración de una bebida fermentada con adición de pulpa maracuyá (passiflora edulis variedad púrpura y carbóximetil celulosa (cmc, enriquecida con vitaminas A y D.

Directory of Open Access Journals (Sweden)

Sepúlveda Valencia José Uriel

2002-12-01

Full Text Available Se puede obtener una bebida con características especiales a partir de la fermentación de suero de queso fresco, en presencia de Streptococcus thermophillus y Lactobacillus bulgaricus, comparable con un yogur tradicional. Se utilizaron 150 kg de lactosuero de queso fresco, a cada muestra de 50 kg se le aplicó un tratamiento con estabilizantes comerciales cuya base es carboximetilcelulosa (CMC 27 FG, CMC 28FG y CMC 29FG, cuya función es conferir viscosidad. La bebida que se desarrolló a partir del gel formado durante el proces, se saborizó con pulpa de maracuyá (Pasiflora edulis var. púrpura, y se enriqueció con vitaminas A y D. La bebida con el tratamiento CMC 28FG demostró las mejores características sensoriales, el producto se mantuvo homogéneo por 24 días de almacenamiento a una temperatura de 6°C, durante este tiempo no se presentaron fenómenos de histéresis, gomosidad o grumosidad al tacto, sin embargo se observó un aumento en la acidez y una disminución de la viscosidad en el tiempo, ambos aspectos no fueron ampliamente percibidos por los jueces hasta la cuarta semana.

Perspectives on Recent Refugees and Immigrant Waves into South Florida. Occasional Papers Series, Dialogues #6.

Science.gov (United States)

Jorge, Antonio; And Others

Six papers presented at a 1982 forum on Latin American and Caribbean migration to South Florida are collected in this document. Their titles (and authors) are: (1) "Refugees and Immigrants: The Last Two Decades" (Antonio Jorge); (2) "U.S. Refugee and Immigration Policy and Its Effect on South Florida" (Alex Stepick); (3)…

Education in a Multi-Cultural Society: The Republic of Singapore. Occasional Paper No. 74-4.

Science.gov (United States)

Hu, Shi Ming

The educational history and practices of the Republic of Singapore, prefaced by a description of the inception of the republic, are described in this paper. The uniqueness of that history stems from the republic's multiracial society which requires equal education opportunities for all four official language groups--Malay, Chinese, Tamil (Indian),…

Fabrication of CMC-g-PAM superporous polymer monoliths via eco-friendly Pickering-MIPEs for superior adsorption of methyl violet and methylene blue

Science.gov (United States)

Wang, Feng; Zhu, Yongfeng; Wang, Wenbo; Zong, Li; Lu, Taotao; Wang, Aiqin

2017-06-01

A series of superporous carboxymethylcellulose-graft-poly(acrylamide) (CMC-g-PAM) polymer monoliths presenting interconnected pore structure and excellent adsorption properties were prepared by one-step free-radical grafting polymerization reaction of CMC and acrylamide (AM) in the oil-in-water (O/W) Pickering-medium internal phase emulsions (Pickering-MIPEs) composed of non-toxic edible oil as a dispersion phase and natural Pal nanorods as stabilizers. The effects of Pal dosage, AM dosage, and co-surfactant Tween-20 (T-20) on the pore structures of the monoliths were studied. It was revealed that the well-defined pores were formed when the dosages of Pal and T-20 are 9-14% and 3%, respectively. The porous monolith can rapidly adsorb 1585 mg/g of methyl violet (MV) and 1625 mg/g of methylene blue (MB). After the monolith was regenerated by adsorption-desorption process for 5 times, the adsorption capacities still reached 92.1% (for MV) and 93.5% (for MB) of the initial maximum adsorption capacities. The adsorption process was fitted with Langmuir adsorption isotherm model and pseudo-second-order adsorption kinetic model very well, which indicate that mono-layer chemical adsorption mainly contribute to the high-capacity adsorption for dyes. The superporous polymer monolith prepared from eco-friendly Pickering-MIPEs shows good adsorption capacity and fast adsorption rate, which is potential adsorbent for the decontimination of dye-containing wastewater.

Socio-demographic and lifestyle-related characteristics associated with self-reported any, daily and occasional smoking during pregnancy.

Science.gov (United States)

Baron, Ruth; Manniën, Judith; de Jonge, Ank; Heymans, Martijn W; Klomp, Trudy; Hutton, Eileen K; Brug, Johannes

2013-01-01

Smoking during pregnancy is a risk factor for various adverse birth outcomes. In order to develop effective interventions, insight is needed into the characteristics associated with pregnant women who smoke. Unknown is whether these characteristics differ for women who smoke daily and women who smoke occasionally. Our study sample, drawn from the DELIVER study (Sept 2009-March 2011), consisted of 6107 pregnant women in primary care in the Netherlands who were up to 34 weeks pregnant. The associations of thirteen socio-demographic or lifestyle-related characteristics with 'any smoking', 'daily smoking' and 'occasional smoking' during pregnancy were tested using multiple binary logistic regression with general estimating equations (GEE). Characteristics most strongly associated with any smoking were low education (OR 10.3; 95% confidence interval (CI) 7.0-15.4), being of Turkish ethnicity (OR 3.9; 95%CI 2.3-6.7) and having no partner (OR 3.7; 95%CI 2.3-6.0). Women of Dutch ethnicity were three times more likely to smoke than those from Dutch-speaking Caribbean countries and non-religious women were much more likely to smoke than religious women. Low education was markedly more strongly associated with daily smoking than with occasional smoking (OR 20.3; 95%CI 13.2-31.3 versus OR 6.0; 95%CI 3.4-10.5). Daily smokers were more likely to be associated with other unfavorable lifestyle-related characteristics, such as not taking folic acid, being underweight, and having had an unplanned pregnancy. There is still much potential for health gain with respect to smoking during pregnancy in the Netherlands. Daily and occasional smokers appear to differ in characteristics, and therefore possibly require different interventions.

The FPase properties and morphology changes of a cellulolytic bacterium, Sporocytophaga sp. JL-01, on decomposing filter paper cellulose.

Science.gov (United States)

Wang, Xiuran; Peng, Zhongqi; Sun, Xiaoling; Liu, Dongbo; Chen, Shan; Li, Fan; Xia, Hongmei; Lu, Tiancheng

2012-01-01

Sporocytophaga sp. JL-01 is a sliding cellulose degrading bacterium that can decompose filter paper (FP), carboxymethyl cellulose (CMC) and cellulose CF11. In this paper, the morphological characteristics of S. sp. JL-01 growing in FP liquid medium was studied by Scanning Electron Microscope (SEM), and one of the FPase components of this bacterium was analyzed. The results showed that the cell shapes were variable during the process of filter paper cellulose decomposition and the rod shape might be connected with filter paper decomposing. After incubating for 120 h, the filter paper was decomposed significantly, and it was degraded absolutely within 144 h. An FPase1 was purified from the supernatant and its characteristics were analyzed. The molecular weight of the FPase1 was 55 kDa. The optimum pH was pH 7.2 and optimum temperature was 50°C under experiment conditions. Zn(2+) and Co(2+) enhanced the enzyme activity, but Fe(3+) inhibited it.

Assessment of NDE methods for detecting cracks and damage in environmental barrier coated CMC tested under tension

Science.gov (United States)

Abdul-Aziz, Ali; Wroblewski, Adam C.; Bhatt, Ramakrishna T.; Jaskowiak, Martha H.; Gorican, Daniel; Rauser, Richard W.

2015-03-01

For validating physics based analytical models predicting spallation life of environmental barrier coating (EBC) on fiber reinforced ceramic matrix composites, the fracture strength of EBC and kinetics of crack growth in EBC layers need to be experimentally determined under engine operating conditions. In this study, a multi layered barium strontium aluminum silicate (BSAS) based EBC-coated, melt infiltrated silicon carbide fiber reinforced silicon carbide matrix composite (MI SiC/SiC) specimen was tensile tested at room temperature. Multiple tests were performed on a single specimen with increasing predetermined stress levels until final failure. During loading, the damage occurring in the EBC was monitored by digital image correlation (DIC). After unloading from the predetermined stress levels, the specimen was examined by optical microscopy and computed tomography (CT). Results indicate both optical microscopy and CT could not resolve the primary or secondary cracks developed during tensile loading until failure. On the other hand, DIC did show formation of a primary crack at ~ 50% of the ultimate tensile strength and this crack grew with increasing stress and eventually led to final failure of the specimen. Although some secondary cracks were seen in the DIC strain plots prior to final failure, the existence of these cracks were not confirmed by other methods. By using a higher resolution camera, it is possible to improve the capability of DIC in resolving secondary cracks and damage in coated specimen tested at room temperature, but use of DIC at high temperature requires significant development. Based on the current data, it appears that both optical microscopy and CT do not offer any hope for detecting crack initiation or determining crack growth in EBC coated CMC tested at room or high temperatures after the specimen has been unloaded. Other methods such as, thermography and optical/SEM of the polished cross section of EBC coated CMC specimens stressed to

Fabrication of CMC-g-PAM Superporous Polymer Monoliths via Eco-Friendly Pickering-MIPEs for Superior Adsorption of Methyl Violet and Methylene Blue.

Science.gov (United States)

Wang, Feng; Zhu, Yongfeng; Wang, Wenbo; Zong, Li; Lu, Taotao; Wang, Aiqin

2017-01-01

A series of superporous carboxymethylcellulose- graft -poly(acrylamide)/palygorskite (CMC- g -PAM/Pal) polymer monoliths presenting interconnected pore structure and excellent adsorption properties were prepared by one-step free-radical grafting polymerization reaction of CMC and acrylamide (AM) in the oil-in-water (O/W) Pickering-medium internal phase emulsions (Pickering-MIPEs) composed of non-toxic edible oil as a dispersion phase and natural Pal nanorods as stabilizers. The effects of Pal dosage, AM dosage, and co-surfactant Tween-20 (T-20) on the pore structures of the monoliths were studied. It was revealed that the well-defined pores were formed when the dosages of Pal and T-20 are 9-14 and 3%, respectively. The porous monolith can rapidly adsorb 1,585 mg/g of methyl violet (MV) and 1,625 mg/g of methylene blue (MB). After the monolith was regenerated by adsorption-desorption process for five times, the adsorption capacities still reached 92.1% (for MV) and 93.5% (for MB) of the initial maximum adsorption capacities. The adsorption process was fitted with Langmuir adsorption isotherm model and pseudo-second-order adsorption kinetic model very well, which indicate that mono-layer chemical adsorption mainly contribute to the high-capacity adsorption for dyes. The superporous polymer monolith prepared from eco-friendly Pickering-MIPEs shows good adsorption capacity and fast adsorption rate, which is potential adsorbent for the decontamination of dye-containing wastewater.

Fabrication of CMC-g-PAM Superporous Polymer Monoliths via Eco-Friendly Pickering-MIPEs for Superior Adsorption of Methyl Violet and Methylene Blue

Directory of Open Access Journals (Sweden)

Feng Wang

2017-06-01

Full Text Available A series of superporous carboxymethylcellulose-graft-poly(acrylamide/palygorskite (CMC-g-PAM/Pal polymer monoliths presenting interconnected pore structure and excellent adsorption properties were prepared by one-step free-radical grafting polymerization reaction of CMC and acrylamide (AM in the oil-in-water (O/W Pickering-medium internal phase emulsions (Pickering-MIPEs composed of non-toxic edible oil as a dispersion phase and natural Pal nanorods as stabilizers. The effects of Pal dosage, AM dosage, and co-surfactant Tween-20 (T-20 on the pore structures of the monoliths were studied. It was revealed that the well-defined pores were formed when the dosages of Pal and T-20 are 9–14 and 3%, respectively. The porous monolith can rapidly adsorb 1,585 mg/g of methyl violet (MV and 1,625 mg/g of methylene blue (MB. After the monolith was regenerated by adsorption-desorption process for five times, the adsorption capacities still reached 92.1% (for MV and 93.5% (for MB of the initial maximum adsorption capacities. The adsorption process was fitted with Langmuir adsorption isotherm model and pseudo-second-order adsorption kinetic model very well, which indicate that mono-layer chemical adsorption mainly contribute to the high-capacity adsorption for dyes. The superporous polymer monolith prepared from eco-friendly Pickering-MIPEs shows good adsorption capacity and fast adsorption rate, which is potential adsorbent for the decontamination of dye-containing wastewater.

Consultation and the TADS Experience. Occasional Paper Number 1.

Science.gov (United States)

Trohanis, Pascal L.; And Others

During the past 10 years, the Technical Assistance Development System's (TADS) staff and advisory board members along with 500 other people have provided consultation services to model demonstration programs and state education agencies that help young handicapped children and their families. Consultants are usually located through a sponsor or…

Does sugar content matter? Blood plasma glucose levels in an occasional and a specialist avian nectarivore.

Science.gov (United States)

Witteveen, Minke; Brown, Mark; Downs, Colleen T

2014-01-01

Nectar composition within a plant pollinator group can be variable, and bird pollinated plants can be segregated into two groups based on their adaptations to either a specialist or an occasional bird pollination system. Specialist nectarivores rely primarily on nectar for their energy requirements, while occasional nectarivores meet their energy requirements from nectar as well as from seeds, fruit and insects. Avian blood plasma glucose concentration (PGlu) is generally high compared with mammals. It is also affected by a range of factors including species, gender, age, ambient temperature, feeding pattern, reproductive status, circadian rhythm and moult status, among others. We examined whether sugar content affected PGlu of two avian nectarivores, a specialist nectarivore the Amethyst Sunbird Chalcomitra amethystina, and an occasional nectarivore the Cape White-eye Zosterops virens, when fed sucrose-hexose sugar solution diets of varying concentrations (5%-35%). Both species regulated PGlu within a range which was affected by sampling time (fed or fasted) and not dietary sugar concentration. The range in mean PGlu was broader in Amethyst Sunbirds (11.52-16.51mmol/L) compared with Cape White-eyes (14.33-15.85mmol/L). This suggests that these birds are not constrained by dietary sugar concentration with regard to PGlu regulation, and consequently selective pressure on plants for their nectar characteristics is due to reasons other than glucose regulation. © 2013.

Socio-demographic and lifestyle-related characteristics associated with self-reported any, daily and occasional smoking during pregnancy.

Directory of Open Access Journals (Sweden)

Ruth Baron

Full Text Available Smoking during pregnancy is a risk factor for various adverse birth outcomes. In order to develop effective interventions, insight is needed into the characteristics associated with pregnant women who smoke. Unknown is whether these characteristics differ for women who smoke daily and women who smoke occasionally. Our study sample, drawn from the DELIVER study (Sept 2009-March 2011, consisted of 6107 pregnant women in primary care in the Netherlands who were up to 34 weeks pregnant. The associations of thirteen socio-demographic or lifestyle-related characteristics with 'any smoking', 'daily smoking' and 'occasional smoking' during pregnancy were tested using multiple binary logistic regression with general estimating equations (GEE. Characteristics most strongly associated with any smoking were low education (OR 10.3; 95% confidence interval (CI 7.0-15.4, being of Turkish ethnicity (OR 3.9; 95%CI 2.3-6.7 and having no partner (OR 3.7; 95%CI 2.3-6.0. Women of Dutch ethnicity were three times more likely to smoke than those from Dutch-speaking Caribbean countries and non-religious women were much more likely to smoke than religious women. Low education was markedly more strongly associated with daily smoking than with occasional smoking (OR 20.3; 95%CI 13.2-31.3 versus OR 6.0; 95%CI 3.4-10.5. Daily smokers were more likely to be associated with other unfavorable lifestyle-related characteristics, such as not taking folic acid, being underweight, and having had an unplanned pregnancy. There is still much potential for health gain with respect to smoking during pregnancy in the Netherlands. Daily and occasional smokers appear to differ in characteristics, and therefore possibly require different interventions.

Macro-Environmental Mapping of International Branch Campus Activities of Universities Worldwide. Research & Occasional Paper Series: CSHE.2.14

Science.gov (United States)

Kosmützky, Anna; Krücken, Georg

2014-01-01

The paper provides an initial international comparative empirical assessment of international branch campuses (IBCs) worldwide. Building on neo-institutional theory and organizational ecology, it sheds light on the new organizational form by analyzing their founding age of the home university and IBC mortality. Furthermore the paper analyzes the…

China: A Follower or Leader in Global Higher Education? Research & Occasional Paper Series: CSHE.1.16

Science.gov (United States)

van der Wende, Marijk; Zhu, Jiabin

2016-01-01

This paper focuses on China both as an object and a subject in the globalization of higher education and the sometimes paradoxical nature of the country's policies in this respect. How is the Chinese perspective on globalization shaping its agenda for higher education, the development of world-class universities, and cooperation with Europe and…

The sociocognitive psychology of computer-mediated communication: the present and future of technology-based interactions.

Science.gov (United States)

Riva, Giuseppe

2002-12-01

The increased diffusion of the Internet has made computer-mediated communication (CMC) very popular. However, a difficult question arises for psychologists and communication researchers: "What are the communicative characteristics of CMC?" According to the "cues-filtered-out" approach, CMC lacks the specifically relational features (social cues), which enable the interlocutors to identify correctly the kind of interpersonal situations they find themselves in. This paper counters this vision by integrating in its theoretical frame the different psycho-social approaches available in current literature. In particular, the paper describes the characteristics of the socio-cognitive processes-emotional expression, context definition, and identity creation-used by the interlocutors to make order and create relationships out of the miscommunication processes typical of CMC. Moreover, it presents the emerging forms of CMC-instant messaging, shared hypermedia, weblogs, and graphical chats-and their possible social and communicative effects.

Cooperative Mmonitoring Center Occasional Paper/5: Propspects of Conventional Arms Control in South Asia

Energy Technology Data Exchange (ETDEWEB)

Gupta, Amit; Kamal, Nazir

1998-11-01

The intensely adversarial relationship between India and Pakistan is marked by military rivalry, mutual distrust, and suspicion. The most dividing disagreement has been over the Kashmir region. An inability to discuss the Kashmir issue has prevented discussion on other important issues. Since there is little prospect of detente, at least in the near-term, the question is whether this rivalry can be contained by other means, such as arms control approaches. Conventional arms control has been applied flexibly and successfully in some regions to reduce threat-perceptions and achieve reassuring military stability. Some lessons from other international models might be applied to the India/Pakistan context. This paper discusses the status of conventional arms control in South Asia, the dominant Indian and Pakistani perceptions about arms control, the benefits that could be derived from arms control, as well as the problems and prospects of arms control. It also discusses existing conventional arms control agreements at the regional and global levels as well as the potential role of cooperative monitoring technology.

Synthesis, CMC Determination, Antimicrobial Activity and Nucleic Acid Binding of A Surfactant Copper(II) Complex Containing Phenanthroline and Alanine Schiff-Base.

Science.gov (United States)

Nagaraj, Karuppiah; Sakthinathan, Subramanian; Arunachalam, Sankaralingam

2014-03-01

A new water-soluble surfactant copper(II) complex [Cu(sal-ala)(phen)(DA)] (sal-ala = salicylalanine, phen = 1,10-phenanthroline, DA = dodecylamine), has been synthesized and characterized by physico-chemical and spectroscopic methods. The critical micelle concentration (CMC) values of this surfactant-copper(II) complex in aqueous solution were obtained from conductance measurements. Specific conductivity data (at 303, 308, 313. 318 and 323 K) served for the evaluation of the temperature-dependent CMC and the thermodynamics of micellization (ΔG(0)m, ΔH(0)m and ΔS(0)m). The interaction of this complex with nucleic acids (DNA and RNA) has been explored by using electronic absorption spectral titration, competitive binding experiment, cyclic voltammetry, circular dichroism (CD) spectra, and viscosity measurements. Electronic absorption studies have revealed that the complex can bind to nucleic acids by the intercalative binding mode which has been verified by viscosity measurements. The DNA binding constants have also been calculated (Kb = 1.2 × 10(5) M(-1) for DNA and Kb = 1.6 × 10(5) M(-1) for RNA). Competitive binding study with ethidium bromide (EB) showed that the complex exhibits the ability to displace the DNA-bound-EB indicating that the complex binds to DNA in strong competition with EB for the intercalative binding site. The presence of hydrophobic ligands, alanine Schiff-base, phenanthroline and long aliphatic chain amine in the complex were responsible for this strong intercalative binding. The surfactant-copper (II) complex was screened for its antibacterial and antifungal activities against various microorganisms. The results were compared with the standard drugs, amikacin(antibacterial) and ketokonazole(antifungal).

Statistical Analysis of CMC Constituent and Processing Data

Science.gov (United States)

Fornuff, Jonathan

2004-01-01

Ceramic Matrix Composites (CMCs) are the next "big thing" in high-temperature structural materials. In the case of jet engines, it is widely believed that the metallic superalloys currently being utilized for hot structures (combustors, shrouds, turbine vanes and blades) are nearing their potential limits of improvement. In order to allow for increased turbine temperatures to increase engine efficiency, material scientists have begun looking toward advanced CMCs and SiC/SiC composites in particular. Ceramic composites provide greater strength-to-weight ratios at higher temperatures than metallic alloys, but at the same time require greater challenges in micro-structural optimization that in turn increases the cost of the material as well as increases the risk of variability in the material s thermo-structural behavior. to model various potential CMC engine materials and examines the current variability in these properties due to variability in component processing conditions and constituent materials; then, to see how processing and constituent variations effect key strength, stiffness, and thermal properties of the finished components. Basically, this means trying to model variations in the component s behavior by knowing what went into creating it. inter-phase and manufactured by chemical vapor infiltration (CVI) and melt infiltration (MI) were considered. Examinations of: (1) the percent constituents by volume, (2) the inter-phase thickness, (3) variations in the total porosity, and (4) variations in the chemical composition of the Sic fiber are carried out and modeled using various codes used here at NASA-Glenn (PCGina, NASALife, CEMCAN, etc...). The effects of these variations and the ranking of their respective influences on the various thermo-mechanical material properties are studied and compared to available test data. The properties of the materials as well as minor changes to geometry are then made to the computer model and the detrimental effects

Cooperative Monitoring Center Occasional Paper/18: Maritime Cooperation Between India and Pakistan: Building Confidence at Sea

Energy Technology Data Exchange (ETDEWEB)

SIDDIQA-AGHA,AYESHA

2000-11-01

This paper discusses ways in which the navies of both India and Pakistan can cooperate on issues of maritime and naval significance. Although the militaries and navies of the two countries have traditionally seen each other as rivals, international economic developments make cooperation imperative. South Asia requires an approach that can alter the existing hostile images and perceptions. This can be achieved through developing an incremental approach towards confidence building that would allow consistency and help build confidence gradually. The aim is to make confidence building a sustainable activity that would help transform hostile images and build cooperative and nonhostile relationships. This paper proposes a five-step model to suggest what the two navies can do jointly to build confidence, with the ultimate goal of naval arms control. The steps include (1) the Signaling Stage to initiate communication between the two navies, (2) the Warming-Up Stage to build confidence through nonmilitary joint ventures, (3) the Handshake Stage to build confidence between the two navies through military joint ventures, (4) the Problem-Solving Stage to resolve outstanding disputes, and (5) the Final Nod Stage to initiate naval arms control. This model would employ communication, navigation, and remote sensing technologies to achieve success.

In-situ X-ray tomographic study of the morphological changes of a Si/C paper anode for Li-ion batteries

Science.gov (United States)

Vanpeene, V.; Etiemble, A.; Bonnin, A.; Maire, E.; Roué, L.

2017-05-01

The evolution of the three-dimensional (3D) morphology of a Si-based electrode upon cycling (1st discharge, 1st charge and 2nd discharge) is studied by in-situ synchrotron X-ray tomography. The Si-based electrode is constituted of silicon/carbon black/carboxymethylcellulose (Si/CB/CMC) embedded in a commercial carbon fiber paper, acting as a flexible 3D current collector. Its initial areal discharge capacity is 4.9 mAh cm-2. A reconstructed volume of 293 × 293 × 137 μm3 is analyzed with a resolution of ∼0.3 μm. Three phases are identified: (i) the solid phase (C fibers + Si + CB + CMC), (ii) the electrolyte phase (pores filled with electrolyte) and (iii) the gas phase (electrolyte-free pores). Their respective volume fraction, size distribution and connectivity, and also the dimensional changes of the electrode along the three axes are quantified during cycling. At the beginning of the 1st discharge (lithiation), the formation of gas channels attributed to the reductive electrolyte decomposition is observed. During the 1st charge, large cracks are formed through the electrode, which reclose during the subsequent discharge. The electrode expansion/contraction due to the Si volume change is partially irreversible, occurs mainly in the transverse direction and is much larger in the bottom part of the electrode.

Medicinal Δ(9) -tetrahydrocannabinol (dronabinol) impairs on-the-road driving performance of occasional and heavy cannabis users but is not detected in Standard Field Sobriety Tests.

Science.gov (United States)

Bosker, Wendy M; Kuypers, Kim P C; Theunissen, Eef L; Surinx, Anke; Blankespoor, Roos J; Skopp, Gisela; Jeffery, Wayne K; Walls, H Chip; van Leeuwen, Cees J; Ramaekers, Johannes G

2012-10-01

The acute and chronic effects of dronabinol [medicinal Δ(9) -tetrahydrocannabinol (THC)] on actual driving performance and the Standard Field Sobriety Test (SFST) were assessed. It was hypothesized that occasional users would be impaired on these tests and that heavy users would show less impairment due to tolerance. Double-blind, placebo-controlled, randomized, three-way cross-over study. Twelve occasional and 12 heavy cannabis users (14 males/10 females) received single doses of placebo, 10 and 20 mg dronabinol. Standard deviation of lateral position (SDLP; i.e. weaving) is the primary measure of road-tracking control. Time to speed adaptation (TSA) is the primary reaction-time measure in the car-following test. Percentage of impaired individuals on the SFST and subjective high on a visual analogue scale were secondary measures. Superiority tests showed that SDLP (P = 0.008) and TSA (P = 0.011) increased after dronabinol in occasional users. Equivalence tests demonstrated that dronabinol-induced increments in SDLP were bigger than impairment associated with BAC of 0.5 mg/ml in occasional and heavy users, although the magnitude of driving impairment was generally less in heavy users. The SFST did not discriminate between conditions. Levels of subjective high were comparable in occasional and heavy users. Dronabinol (medicinal tetrahydrocannabinol) impairs driving performance in occasional and heavy users in a dose-dependent way, but to a lesser degree in heavy users due possibly to tolerance. The Standard Field Sobriety Test is not sensitive to clinically relevant driving impairment caused by oral tetrahydrocannabinol. © 2012 The Authors. Addiction © 2012 Society for the Study of Addiction.

The Role of Religion in National Security Policy Since September 11, 2001(Carlisle Paper)

Science.gov (United States)

2011-02-01

satisfy ideology, especially one’s own. Warraq quotes Isaiah Berlin, arguing that from the latent desire to, “suppress what [one] suspects to be true...and strategy which obtain between Sunnis and Shi’is. Thomas F. Lynch III notes important differences in motivation and strategy that con- tinue to... Thomas F. Lynch III, Sunni and Shi’a Terrorism: Differences that Matter, Occasional Paper Series, West Point Combating Terrorism Center, December 29, 2008

The Targeted Antitumor Effects of C- PC/CMC-CD59sp Nanoparticles on HeLa Cells in Vitro and in Vivo.

Science.gov (United States)

Wang, Yujuan; Jiang, Liangqian; Yin, Qifeng; Liu, Huihui; Liu, Guoxiang; Zhu, Guoteng; Li, Bing

2017-01-01

The novel C-PC/CMC-CD59sp-NPs were made by carbocymethyl chitosan (CMC) loading C-phycocyanin (C-PC) with the lead of CD59 specific ligand peptide (CD59sp) for targeting, and the characteristics and targeted anti-tumor mechanism were explored in order to realize the targeted therapy of C-PC on the growth of HeLa cells both in vitro and vivo . The targeting nanoparticles were synthesized by ionic-gelation method, and the optimal condition was selected out by orthogonal analysis. The properties of nanoparticles were observed by laser particle analyzer and dynamic light scattering (DLS) and Fourier Transform Infrared Spectrometer (FTIR). The effects of nanoparticles on the proliferation of HeLa cells in vitro were assessed by MTT assay. The mice model with tumor was constructed by subcutaneous injection of HeLa cells into the left axilla of NU/NU mice. The weight of tumor and the spleen were tested. The expression quantities of cleaved caspase-3, Bcl-2 were determined by western blot and immunofluorescent staining. Results showed the morphology of the finally prepared nanoparticles was well distributed with a diameter distribution of 200±11.3 nm and zeta potential of -19.5±4.12mV. Under the guidance of CD59sp, the targeting nanoparticles could targetedly and efficiently arrive at the surface of HeLa cells, and had obvious inhibitory effect on HeLa cells proliferation both in vitro and vivo. Moreover, the nanoparticles could induce cell apoptosis by up-regulation of cleaved caspase-3 proteins expression, but down-regulation of Bcl-2 and cyclinD1 proteins. Our study provided a new idea for the research and development of marine drugs, and supplied a theoretical support for the target therapy of anticancer drug.

Patterns of use and toxicity of new para-halogenated substituted cathinones: 4-CMC (clephedrone), 4-CEC (4-chloroethcatinone) and 4-BMC (brephedrone).

Science.gov (United States)

Grifell, Marc; Ventura, Mireia; Carbón, Xoán; Quintana, Pol; Galindo, Liliana; Palma, Álvaro; Fornis, Ivan; Gil, Cristina; Farre, Magi; Torrens, Marta

2017-05-01

This paper aims to present results of the analysis of clephedrone (4-CMC), 4-chloroethcathinone (4-CEC), and brephedrone (4-BMC) on recreational drug markets and a systematic review of all the available information concerning these substances. Samples collected by the drug checking service of the Spanish harm reduction NGO-Energy Control were analyzed and systematic research was conducted. Between June 2014 and October 2016, 1,471 samples with at least one NPS were analyzed, 397 of which contained cathinones. Clephedrone was found in 29 samples, brephedrone in 8, and both were present in 2 samples. 4-Chloroethcathinone was detected in 5 samples. Eleven out of the 47 purchased samples (23.4%) were tested to contain the substance the user expected. Samples received were mainly sold as 3-MMC, MDMA, ketamine, and other cathinones. No literature on the effects or toxicity of these substances was found; the only information available was on internet fora. On many posts, users exhibit concerns about potential toxicity and side effects of using these substances. Since the emergence of these substances could prove to be the next step to the cat-and-mouse game existing between drug producers and legislation, further clinical and epidemiological research should be carried out in order to build evidence to support policy for public health issues. Copyright © 2017 John Wiley & Sons, Ltd.

The Effect of Occasional Alcohol Drinking on Semen Quality and Sperm Morphology among Young and Healthy Polish Men

Directory of Open Access Journals (Sweden)

Felicja Lwow

2017-10-01

Full Text Available ABSTRACT Background: Ethanol (EtOH is an agent that seems to exert an especially harmful effect on male fertility. The impact of high EtOH intake on fertility was demonstrated in numerous researches, with data suggesting that this effect may have been due to decreased semen quality; however, similar negative effects were not identified among occasional EtOH drinkers. There are currently no recommendations for alcohol consumption for men who plan to have a child other than avoiding high EtOH intake. Thus, studies on the effect of moderate and occasional EtOH drinking on semen quality are needed to develop appropriate recommendations for men planning to have a child in the future. The aim of this study was to determine whether changes in semen quality parameters and sperm morphology occur in healthy young men who occasionally exceed the WHO-recommended weekly dose of EtOH but are not alcohol dependent and do not frequently consume high amounts of EtOH. Methods: The study sample consisted of 172 young men residing in urban areas. The semen quality and morphology of men who consumed more than 140 g of ethanol (high-risk group, HR, n=44 weekly was compared with that of low-risk group members (LR, n=128 who reported lower alcohol consumption. Results: The only between-group difference in semen characteristics was the identification of a higher percentage of macrocephalic sperm in the HR group (P=0.011. Alcohol intake was the sole factor influencing the percentage of macrocephalic sperm (b=0.171, P=0.025, multiple linear regression. Conclusions: We concluded that occasional alcohol consumption did not alter fertility but caused the accumulation of macrocephalic sperm potentially containing damaged DNA. Therefore, we recommend that men who plan to father children stop drinking alcohol at least 3 months before engaging in sexual intercourse that may lead to pregnancy.

An Overlooked Resource for English Language Teaching: Pop. Rock, and Folk Music. CATESOL Occasional Papers, No. 2.

Science.gov (United States)

Dubin, Fraida

This paper discusses the use of pop, rock, and folk music in foreign language teaching. Modern music represents an idiom familiar to a broad span of young people, and has an important place in the life of students ranging in age from ten to thirty-five years of age. It also tends to follow and comment on the important trends of modern society.…

Teacher Education in Prince Edward Island. Occasional Papers No. 13.

Science.gov (United States)

Brehaut, Willard

This booklet evaluates teacher education in Prince Edward Island and recommends some immediate changes. The evaluation was occasioned by the changing role of the teacher in the world today from being "the prime source," a position that causes inadequacies and insecurity, to being the guide of individual children through appropriate…

Conversation and Narrative in Collaborative Research. Occasional Paper No. 102.

Science.gov (United States)

Florio-Ruane, Susan

A group of teachers and researchers organized the Written Literacy Forum (WLF) to investigate how research on writing instruction could be made more practical for educators. WLF examined common research assumptions and their effects on formal research presentations, highlighting the surprising lack of effort by researchers to talk with teachers…

Compromised Futures: Indiana's Children in Poverty. Occasional Paper No. 2.

Science.gov (United States)

Erickson, Judith B.

The number of poor children in the United States is high, and estimates suggest that poverty among Indiana's children is increasing at twice the national rate. Presently, Indiana does not have readily available, comprehensive information about the state's children and adolescents. There are few ways to link Indiana's poverty data to other…

Cooperative Monitoring Center Occasional Paper/11: Cooperative Environmental Monitoring in the Coastal Regions of India and Pakistan

Energy Technology Data Exchange (ETDEWEB)

Rajen, Gauray

1999-06-01

The cessation of hostilities between India and Pakistan is an immediate need and of global concern, as these countries have tested nuclear devices, and have the capability to deploy nuclear weapons and long-range ballistic missiles. Cooperative monitoring projects among neighboring countries in South Asia could build regional confidence, and, through gradual improvements in relations, reduce the threat of war and the proliferation of weapons of mass destruction. This paper discusses monitoring the trans-border movement of flow and sediment in the Indian and Pakistani coastal areas. Through such a project, India and Pakistan could initiate greater cooperation, and engender movement towards the resolution of the Sir Creek territorial dispute in their coastal region. The Joint Working Groups dialogue being conducted by India and Pakistan provides a mechanism for promoting such a project. The proposed project also falls within a regional framework of cooperation agreed to by several South Asian countries. This framework has been codified in the South Asian Seas Action Plan, developed by Bangladesh, India, Maldives, Pakistan and Sri Lanka. This framework provides a useful starting point for Indian and Pakistani cooperative monitoring in their trans-border coastal area. The project discussed in this paper involves computer modeling, the placement of in situ sensors for remote data acquisition, and the development of joint reports. Preliminary computer modeling studies are presented in the paper. These results illustrate the cross-flow connections between Indian and Pakistani coastal regions and strengthen the argument for cooperation. Technologies and actions similar to those suggested for the coastal project are likely to be applied in future arms control and treaty verification agreements. The project, therefore, serves as a demonstration of cooperative monitoring technologies. The project will also increase people-to-people contacts among Indian and Pakistani policy

Scientific Grid activities and PKI deployment in the Cybermedia Center, Osaka University.

Science.gov (United States)

Akiyama, Toyokazu; Teranishi, Yuuichi; Nozaki, Kazunori; Kato, Seiichi; Shimojo, Shinji; Peltier, Steven T; Lin, Abel; Molina, Tomas; Yang, George; Lee, David; Ellisman, Mark; Naito, Sei; Koike, Atsushi; Matsumoto, Shuichi; Yoshida, Kiyokazu; Mori, Hirotaro

2005-10-01

The Cybermedia Center (CMC), Osaka University, is a research institution that offers knowledge and technology resources obtained from advanced researches in the areas of large-scale computation, information and communication, multimedia content and education. Currently, CMC is involved in Japanese national Grid projects such as JGN II (Japan Gigabit Network), NAREGI and BioGrid. Not limited to Japan, CMC also actively takes part in international activities such as PRAGMA. In these projects and international collaborations, CMC has developed a Grid system that allows scientists to perform their analysis by remote-controlling the world's largest ultra-high voltage electron microscope located in Osaka University. In another undertaking, CMC has assumed a leadership role in BioGrid by sharing its experiences and knowledge on the system development for the area of biology. In this paper, we will give an overview of the BioGrid project and introduce the progress of the Telescience unit, which collaborates with the Telescience Project led by the National Center for Microscopy and Imaging Research (NCMIR). Furthermore, CMC collaborates with seven Computing Centers in Japan, NAREGI and National Institute of Informatics to deploy PKI base authentication infrastructure. The current status of this project and future collaboration with Grid Projects will be delineated in this paper.

Comparing the Effects of Negative and Mixed Emotional Messages on Predicted Occasional Excessive Drinking

OpenAIRE

Carrera, Pilar; Caballero, Amparo; Mu?oz, Dolores

2008-01-01

In this work we present two types of emotional message, negative (sadness) versus mixed (joy and sadness), with the aim of studying their differential effect on attitude change and the probability estimated by participants of repeating the behavior of occasional excessive drinking in the near future. The results show that for the group of participants with moderate experience in this behavior the negative message, compared to the mixed one, is associated with higher probability of repeating t...

Comparing the effects of negative and mixed emotional messages on predicted occasional excessive drinking

OpenAIRE

Carrera Levillain, Pilar; Caballero González, Amparo; Muñoz Cáceres, María Dolores

2008-01-01

In this work we present two types of emotional message, negative (sadness) versus mixed (joy and sadness), with the aim of studying their differential effect on attitude change and the probability estimated by participants of repeating the behavior of occasional excessive drinking in the near future. The results show that for the group of participants with moderate experience in this behavior the negative message, compared to the mixed one, is associated with higher probability of repeating t...

Co-Marketing Capability and its Impact on Marketing Allinace Performance

OpenAIRE

Schögel, Marcus; Herhausen, Dennis

2010-01-01

The aim of this paper is to conceptualize co-marketing capability (CMC) and to explore its relationship to marketing alliance performance. Drawing on a literature review, in-depth interviews with marketing alliance managers and consulting experience concerning co-marketing alliances, we established a multidimensional model of CMC. Using data from 287 chief marketing officers, we empirically show that the identified CMC is an important source of competitive advantage in terms of marketing alli...

Pure exciton- and magnon-assisted optical transitionsin the one-dimensional antiferromagnet CsMnCl3x2H2O (CMC)

International Nuclear Information System (INIS)

Jia, W.; Strauss, E.; Yen, W.M.

1981-01-01

We report the first observation of the pure electronic transitions in the 4 T 1 state of Mn 2+ ions in the one-dimensional antiferromagnet CsMnCl 3 x2H 2 O (CMC) in the absorption, excitation, and fluorescence spectra. Selection rules are analyzed: the exciton transition is electric dipole allowed, the magnon sideband in emission is a single-ion process, and is both electric and magnetic dipole allowed; however, the magnon sideband in absorption is an ion-pair process and is a weakened-electric-dipole and magnetic-dipole transition. The density of magnon states and the line profile of the magnon sideband have been calculated. The results explain the peculiar line shapes of the observed sideband emission. An exponential decay of the exciton is observed with a lifetime of 0.576 ms

The Relationships between Faculty Preparation Programs and Teaching Assistant Development Programs. Preparing Future Faculty. Occasional Paper No. 4.

Science.gov (United States)

Tice, Stacey Lane

This paper examines the relationship between teaching assistant (TA) development programs and faculty preparation programs, the commonalities between the two types of program, and the issues to be considered when making the transition from the former to the latter. It notes that many institutions adopted TA training programs in the 1980s in…

Kinetic Monte Carlo studies of the reaction kinetics of crystal defects that diffuse one-dimensionally with occasional transverse migration

DEFF Research Database (Denmark)

Heinisch, H.L.; Trinkaus, H.; Singh, Bachu Narain

2007-01-01

The reaction kinetics of the various species of mobile defects in irradiated materials are crucially dependent on the dimensionality of their migration. Sink strengths for one-dimensionally (1D) gliding interstitial loops undergoing occasional direction changes have been described analytically...

Determinants of condom use with occasional partners among MSM in Ukraine

Directory of Open Access Journals (Sweden)

Nadiya Klymenko

2012-05-01

Full Text Available BACKGROUND: Men who have sex with men (MSM are considered a high-risk group for HIV. As condom use prevents HIV transmission, a study of factors associated with condom use with occasional partners (CUWOP among MSM was undertaken.METHODS: Case-control study with 866 participants was nested in a cross-sectional survey among MSM conducted in 2007. Controls were those who used a condom during the most recent sexual contact with an occasional partner, and cases – those who did not. Independent variables included socio-demographic characteristics, other risky behaviors, HIV knowledge and sources of information. Bivariate analysis used chi-square test and multivariate – binary logistic regression.RESULTS: Better knowledge and use of harm reduction services (HRS was associated with safer behaviors. Those respondents, who were unaware whether HIV testing was available to them, had a greater risk of unprotected sex: OR = 2.344 (95%CI 1.09-5.00 as well as those who were unclear about the quality of condoms they get from HRS. Among those not covered by HRS, older MSM and those who have multiple commercial partners are at higher risk of unprotected sex. Among those attending HRS, a major barrier to use condoms is their perception as diminishing sensitivity: OR=4.143 (95%CI 1.305-13.152. The dose-dependent association was found with frequency of alcohol consumption – unsafe sexual contacts were more likely in daily alcohol users compared to those who used alcohol on a monthly basis: OR=2.264 (95%CI 1.041-4.923. DISCUSSION: Low CUWOP is typical for those MSMs who practice other risky behaviors including frequent alcohol use, contacts with multiple commercial sex partners and non-use of HRS which include provision of information, condoms and testing. Thus HIV prevention depends not only on the fact whether preventive services are provided but whether they are used by the target group.

A simplified approach to estimating the distribution of occasionally-consumed dietary components, applied to alcohol intake

Directory of Open Access Journals (Sweden)

Julia Chernova

2016-07-01

Full Text Available Abstract Background Within-person variation in dietary records can lead to biased estimates of the distribution of food intake. Quantile estimation is especially relevant in the case of skewed distributions and in the estimation of under- or over-consumption. The analysis of the intake distributions of occasionally-consumed foods presents further challenges due to the high frequency of zero records. Two-part mixed-effects models account for excess-zeros, daily variation and correlation arising from repeated individual dietary records. In practice, the application of the two-part model with random effects involves Monte Carlo (MC simulations. However, these can be time-consuming and the precision of MC estimates depends on the size of the simulated data which can hinder reproducibility of results. Methods We propose a new approach based on numerical integration as an alternative to MC simulations to estimate the distribution of occasionally-consumed foods in sub-populations. The proposed approach and MC methods are compared by analysing the alcohol intake distribution in a sub-population of individuals at risk of developing metabolic syndrome. Results The rate of convergence of the results of MC simulations to the results of our proposed method is model-specific, depends on the number of draws from the target distribution, and is relatively slower at the tails of the distribution. Our data analyses also show that model misspecification can lead to incorrect model parameter estimates. For example, under the wrong model assumption of zero correlation between the components, one of the predictors turned out as non-significant at 5 % significance level (p-value 0.062 but it was estimated as significant in the correctly specified model (p-value 0.016. Conclusions The proposed approach for the analysis of the intake distributions of occasionally-consumed foods provides a quicker and more precise alternative to MC simulation methods, particularly in the

Enhanced reversible lithium storage in a nano-Si/MWCNT free-standing paper electrode prepared by a simple filtration and post sintering process

International Nuclear Information System (INIS)

Yue Lu; Zhong Haoxiang; Zhang Lingzhi

2012-01-01

Graphical abstract: Nano-Si/multi-wall carbon nanotube composite paper was prepared as free-standing electrode for lithium-ion batteries by a simple filtration method using sodium carboxymethyl cellulose as a dispersing/binding agent, followed by a thermal sintering process. The prepared paper electrode exhibited a significantly improved electrochemical performance, maintaining a specific capacity of 942 mAh g −1 after 30 cycles with a capacity fade of 0.46%/cycle. - Abstract: Nano-Si/(multi-wall carbon nanotube) (Si/MWCNT) composite paper was prepared as flexible electrode for lithium ion batteries by a simple filtration method using sodium carboxymethyl cellulose (CMC) as a dispersing/binding agent, followed by a thermal sintering process. Scanning electron microscopy (SEM) showed that nanosized Si particles were dispersed homogeneously and intertwined by the MWCNT throughout the whole paper electrode. After thermal sintering, Si/MWCNT paper electrode exhibited a significantly improved flexibility with a high Si content of 35.6 wt% as compared with before sintering, and retained a specific capacity of 942 mAh g −1 after 30 cycles with a capacity fade of 0.46%/cycle.

Conducting Creativity Brainstorming Sessions in Small and Medium-Sized Enterprises Using Computer-Mediated Communication Tools

Science.gov (United States)

Murthy, Uday S.

A variety of Web-based low cost computer-mediated communication (CMC) tools are now available for use by small and medium-sized enterprises (SME). These tools invariably incorporate chat systems that facilitate simultaneous input in synchronous electronic meeting environments, allowing what is referred to as “electronic brainstorming.” Although prior research in information systems (IS) has established that electronic brainstorming can be superior to face-to-face brainstorming, there is a lack of detailed guidance regarding how CMC tools should be optimally configured to foster creativity in SMEs. This paper discusses factors to be considered in using CMC tools for creativity brainstorming and proposes recommendations for optimally configuring CMC tools to enhance creativity in SMEs. The recommendations are based on lessons learned from several recent experimental studies on the use of CMC tools for rich brainstorming tasks that require participants to invoke domain-specific knowledge. Based on a consideration of the advantages and disadvantages of the various configuration options, the recommendations provided can form the basis for selecting a CMC tool for creativity brainstorming or for creating an in-house CMC tool for the purpose.

Two Studies Examining Argumentation in Asynchronous Computer Mediated Communication

Science.gov (United States)

Joiner, Richard; Jones, Sarah; Doherty, John

2008-01-01

Asynchronous computer mediated communication (CMC) would seem to be an ideal medium for supporting development in student argumentation. This paper investigates this assumption through two studies. The first study compared asynchronous CMC with face-to-face discussions. The transactional and strategic level of the argumentation (i.e. measures of…

"I Totally Agree with You": Gender Interactions in Educational Online Discussion Groups

Science.gov (United States)

Guiller, J.; Durndell, A.

2006-01-01

This paper discusses findings from an extensive project examining gender, language and computer-mediated communication (CMC) in the context of undergraduate psychology courses. The contributions of 197 introductory psychology students (148 females, 49 males) participating in asynchronous CMC as part of their course were collated and coded for…

Suicide attempt with a mix of synthetic cannabinoids and synthetic cathinones: Case report of non-fatal intoxication with AB-CHMINACA, AB-FUBINACA, alpha-PHP, alpha-PVP and 4-CMC.

Science.gov (United States)

Klavž, Janez; Gorenjak, Maksimiljan; Marinšek, Martin

2016-08-01

We report on a case of intoxication with a mix of new psychoactive substances. A 38-year-old male was brought to the emergency department (ED) following the ingestion of an unknown drug in a suicide attempt. During the transport, he became progressively more somnolent and unresponsive to painful stimuli. Urine and stomach content were collected on admission to be screened for drugs of abuse and medicinal drugs. After admission, the patient's next of kin presented five small grip seal plastic bags containing different powders/crystals, and they were sent for analysis along with urine and stomach content to the toxicology laboratory. An easy and rapid sample preparation technique was applied for the extraction of urine and stomach content. Samples were extracted with liquid-liquid extraction (LLE) technique and analysed using gas chromatography-mass spectrometry (GC-MS). A small amount of powder material from the bags was diluted in methanol and injected directly into the GC-MS instrument. Obtained spectra (EI) were evaluated against SWGDRUG library. Five different designer drugs were identified in the powder material, including synthetic cannabinoids (AB-CHMINACA, AB-FUBINACA) and synthetic cathinones (alpha-PHP, alpha-PVP and 4-CMC). With the exception of 4-CMC, all of these substances were also detected in the stomach content along with the prescription drugs. This is the first time that a positive identification of these five drugs has been made by a clinical laboratory in Slovenia. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Ecological Concern Among High School Seniors: 1976-1979. Monitoring the Future Occasional Paper Series, Paper 7.

Science.gov (United States)

Miller, John D.; Bachman, Jerald G.

Examined are the environmental attitudes of United States high school senior classes of 1976-1979. Multi-item indices of concern about pollution, overpopulation, energy conservation, other people, and the importance of material things were administered to about 17,000 students in approximately 130 high schools each year. The four classes of…

An Overview on the Improvement of Mechanical Properties of Ceramics Nano composites

International Nuclear Information System (INIS)

Silvestre, J.; Brito, J. D.; Silvestre, N.

2015-01-01

Due to their prominent properties (mechanical, stiffness, strength, thermal stability), ceramic composite materials (CMC) have been widely applied in automotive, industrial and aerospace engineering, as well as in biomedical and electronic devices. Because monolithic ceramics exhibit brittle behaviour and low electrical conductivity, CMC_s have been greatly improved in the last decade. CMC_s are produced from ceramic fibres embedded in a ceramic matrix, for which several ceramic materials (oxide or non-oxide) are used for the fibres and the matrix. Due to the large diversity of available fibres, the properties of CMC_s can be adapted to achieve structural targets. They are especially valuable for structural components with demanding mechanical and thermal requirements. However, with the advent of nanoparticles in this century, the research interests in CMC_s are now changing from classical reinforcement (e.g., microscale fibres) to new types of reinforcement at nano scale. This review paper presents the current state of knowledge on processing and mechanical properties of a new generation of CMC_s: Ceramics Nano composites (CNC_s)

Firms' Motivation for Training Apprentices: An Australian-German Comparison. Occasional Paper

Science.gov (United States)

Pfeifer, Harald

2016-01-01

This study investigated how firms in Germany and Australia compare when dealing with the institutional arrangements for apprenticeship training in their countries, with particular attention given to factors which may impact on their training motivation. Apprenticeships are a well-established pathway to employment across many countries, with a…

Teacher Leaders: Transforming Schools from the inside. Occasional Paper Series 23

Science.gov (United States)

Schmerler, Gil, Ed.; Mhatre, Nayantara; Stacy, Jill; Patrizio, Kami; Winkler, Jessica Endlich; Groves, Jennifer; Rockwood, Kathleen Dickinson; Lin, Clara E.; Hernandez, Lillian; Solorza, Cristian; Hummel, Robin E.

2009-01-01

Teacher leadership is "hard." Many of the reasons are obvious: Teaching is a highly labor-intensive profession to begin with, leaving little downtime for work with other adults. School schedules are notoriously stingy with space for adult collaboration. Teachers are rarely paid to exercise leadership; when they are, they are never paid…

The Long War Against Piracy: Historical Trends (Occasional Paper, Number 32)

Science.gov (United States)

2010-05-01

develop bases closer to their targets.8 Tortuga , located off the northwest coast of Hispaniola, was the first great pirate sanctuary. It maintained...the boucaniers fled to Tortuga , a small island off the northwest coast of Hispaniola, and turned to piracy. The French boucaniers, whose name was...buccaneers commanded large sailing vessels and operated with impunity throughout the Caribbean. Although the Spanish raided Tortuga from time to time

Information Technology and Language Development. Occasional Paper InTER/10/89.

Science.gov (United States)

Rymaszewski, Rachel, Ed.

This report of a seminar on information technology (IT) and language development begins by presenting background on language skills and information technology in order to define the scope of the topic. The report then pulls together and elaborates on the output of the seminar. The first section discusses media-centered issues, including the design…

Art & Early Childhood: Personal Narratives & Social Practices. Occasional Paper Series 31

Science.gov (United States)

Sunday, Kris, Ed.; McClure, Marissa, Ed.; Schulte, Christopher, Ed.

2015-01-01

This issue explores the nature of childhood by offering selections that re/imagine the idea of the child as art maker; inquire about the relationships between children and adults when they are making art; and investigate how physical space influences approaches to art instruction. Readers are invited to join a dialogue that questions long-standing…

Adaptations of DDC in the Middle East. Occasional Papers Number 170.

Science.gov (United States)

Momeni, Mahvash K.

This study analyzes the sociocultural factors that affect translations of the Dewey Decimal Classification system (DDC) from English into four other languages, i.e., Arabic, Farsi, Hindi, and Turkish. The study was performed in three stages: each entry in each translation was compared with the edition of DDC on which it was based; each class of…

Oral Computer-Mediated Interaction Between L2 Learners: It’s About Time!

Directory of Open Access Journals (Sweden)

Yanguas, Íñigo

2010-10-01

Full Text Available This study explores task-based, synchronous oral computer-mediated communication (CMC among intermediate-level learners of Spanish. In particular, this paper examines (a how learners in video and audio CMC groups negotiate for meaning during task-based interaction, (b possible differences between both oral CMC modes and traditional face-to-face (FTF communication, and (c how this oral computer mediated negotiation compares to that found in the text-based CMC literature. Fifteen learner-to-learner dyads were randomly assigned to an audio group, a video group, and a FTF control group to complete a jigsaw task that was seeded with 16 unknown lexical items. Experimental groups used Skype, free online communication software, to carry out the task. The transcripts of the conversations reveal that oral CMC groups do indeed negotiate for meaning in this multimedia context when non-understanding occurs between speakers. In addition, results showed differences in the way audio and video groups carry out these negotiations, which were mainly due to the lack of visual contact in the audio group. No differences were found between video and FTF groups. Furthermore, oral CMC turn-taking patterns were shown to be very similar to FTF patterns but opposite to those found in written synchronous CMC. Oral CMC interaction patterns are shown to be more versatile.

Seeking a Roadmap to Becoming World Class: Strategic Planning at Peking University. Research & Occasional Paper Series: CSHE.11.13

Science.gov (United States)

Guangkuan, Xie

2013-01-01

Strategic planning plays an important but sometimes controversial role in higher education. This paper examines how strategic planning works in Chinese universities, using Peking University as a case study. This essay discusses the rationale for why Peking University (PKU) decided to pursue status as a world-class university along with objectives…

Population pharmacokinetics model of THC used by pulmonary route in occasional cannabis smokers.

Science.gov (United States)

Marsot, A; Audebert, C; Attolini, L; Lacarelle, B; Micallef, J; Blin, O

Cannabis is the most widely used illegal drug in the world. Delta-9-tetrahydrocannabinol (THC) is the main source of the pharmacological effect. Some studies have been carried out and showed significant variability in the described models as the values of the estimated pharmacokinetic parameters. The objective of this study was to develop a population pharmacokinetic model for THC in occasional cannabis smokers. Twelve male volunteers (age: 20-28years, body weight: 62.5-91.0kg), tobacco (3-8 cigarette per day) and cannabis occasional smokers were recruited from the local community. After ad libitum smoking cannabis cigarette according a standardized procedure, 16 blood samples up to 72h were collected. Population pharmacokinetic analysis was performed using a non-linear mixed effects model, with NONMEM software. Demographic and biological data were investigated as covariates. A three-compartment model with first-order elimination fitted the data. The model was parameterized in terms of micro constants and central volume of distribution (V 1 ). Normal ALT concentration (6.0 to 45.0IU/l) demonstrated a statistically significant correlation with k 10 . The mean values (%Relative Standard Error (RSE)) for k 10 , k 12 , k 21 , k 23 , k 32 and V 1 were 0.408h -1 (48.8%), 4.070h -1 (21.4%), 0.022h -1 (27.0%), 1.070h -1 (14.3%), 1.060h -1 (16.7%) and 19.10L (39.7%), respectively. We have developed a population pharmacokinetic model able to describe the quantitative relationship between administration of inhaled doses of THC and the observed plasma concentrations after smoking cannabis. In addition, a linear relationship between ALT concentration and value of k 10 has been described and request further investigation. Copyright © 2017 Elsevier Inc. All rights reserved.

Assessment of the Effectiveness of Internet-Based Distance Learning through the VClass e-Education Platform

Directory of Open Access Journals (Sweden)

Chadchadaporn Pukkaew

2013-09-01

Full Text Available This study assesses the effectiveness of internet-based distance learning (IBDL through the VClass live e-education platform. The research examines (1 the effectiveness of IBDL for regular and distance students and (2 the distance students’ experience of VClass in the IBDL course entitled Computer Programming 1. The study employed the common definitions of evaluation to attain useful statistical results. The measurement instruments used were test scores and questionnaires. The sample consisted of 59 first-year undergraduate students, most of whom were studying computer information systems at Rajamangala University of Technology Lanna Chiang Mai in Thailand. The results revealed that distance students engaged in learning behavior only occasionally but that the effectiveness of learning was the same for distance and regular students. Moreover, the provided computer-mediated communications (CMC (e.g., live chat, email, and discussion board were sparingly used, primarily by male distance students. Distance students, regular students, the instructor, and the tutor agreed to use a social networking site, Facebook, rather than the provided CMC during the course. The evaluation results produce useful information that is applicable for developing and improving IBDL practices.

Anonymously Productive and Socially Engaged While Learning at Work

Science.gov (United States)

Magni, Luca

2016-01-01

Many concurrent variables appear to influence people when they interact anonymously, either face-to-face (F2F) or in computer-mediated communications (CMC).This paper presents the results of a small exploratory research, conducted in a medical company in Italy, to investigate how the use of pseudonyms influences CMC behaviours. The study involved…

A way to motivate Danish GPs to implement a new national service.

Science.gov (United States)

Kristensen, Alice; Wengler, Bente

2012-01-01

The Common Medicine card (CMC) is a new national service in Denmark which aim is to ensure better patient care and minimize medication errors. All health professionals as well as authorities have to use this system. CMC requires changing the organization of work for both physicians and clinical staff in General Practice (GP). Commissioning of CMC in GP requires a significant effort beyond the technical installation of the solution. Finding the right way to implement a new service in a busy GP has been the main focus of the national project organization MedCom. MedCom has in collaboration with the five regions in Denmark, established a joint plan and has created an implementation model contraining various initiatives including "after hours" meetings for each service provider of EMR (Electronic Medicine Records) in order to disseminate and support the new CMC service. This paper shows the status of the "after hours" meetings effect in dissemination of CMC from August to November 2011.

Pyrene absorption can be a convenient method for probing critical micellar concentration (cmc) and indexing micellar polarity.

Science.gov (United States)

Basu Ray, Gargi; Chakraborty, Indranil; Moulik, Satya P

2006-02-01

The critical micellar concentration (cmc) of both ionic and non-ionic surfactants can be conveniently determined from the measurements of UV absorption of pyrene in surfactant solution. The results on a number of surfactants have agreed with that realized from pyrene fluorescence measurements as well as that obtained following conductometric, tensiometric and calorimetric methods. The absorbance vs [surfactant] profiles for all the major UV spectral peaks of pyrene have been found to be sigmoidal in nature which were analyzed according to Sigmoidal-Boltzmann equation (SBE) to evaluate the cmcs of the studied surfactants. The difference between the initial and the final asymptotes (a(i) and a(f), respectively) of the sigmoidal profile, Delta a = (a(f)-a(i)) and the slope of the sigmoid, S(sig) have been observed to depend on the type of the surfactant. The Delta a has shown a linear correlation with the ratio of the fluorescence intensities of the first and the third vibronic peaks, I1/I3 of pyrene which is considered as a measure of the environmental polarity (herein micellar interior) of the probe (pyrene). Thus, Delta a values have the prospect for use as another index for the estimation of polarity of micellar interior.

GRAPHIC-ANALYTICAL METHODS FOR CALCULATING THE GRAVITY CENTER OF A MODEL AIRPLANE

OpenAIRE

DIACONESCU Olivian

2012-01-01

This paper presents a stage of the realization of an airplane capable to work with low capacity motors between 2.5 cmc and 4 cmc, as it presents the gravity center calculation. Firstly for an airplane to fly properly we must calculate the gravity center, the top speed which is necessary for picking the servomotors that equip the airplane.

Occasional large emissions of nitrous oxide and methane observed in stormwater biofiltration systems

International Nuclear Information System (INIS)

Grover, Samantha P.P.; Cohan, Amanda; Chan, Hon Sen; Livesley, Stephen J.; Beringer, Jason; Daly, Edoardo

2013-01-01

Designed, green infrastructures are becoming a customary feature of the urban landscape. Sustainable technologies for stormwater management, and biofilters in particular, are increasingly used to reduce stormwater runoff volumes and peaks as well as improve the water quality of runoff discharged into urban water bodies. Although a lot of research has been devoted to these technologies, their effect in terms of greenhouse gas fluxes in urban areas has not been yet investigated. We present the first study aimed at quantifying greenhouse gas fluxes between the soil of stormwater biofilters and the atmosphere. N 2 O, CH 4 , and CO 2 were measured periodically over a year in two operational vegetated biofiltration cells at Monash University in Melbourne, Australia. One cell had a saturated zone at the bottom, and compost and hardwood mulch added to the sandy loam filter media. The other cell had no saturated zone and was composed of sandy loam. Similar sedges were planted in both cells. The biofilter soil was a small N 2 O source and a sink for CH 4 for most measurement events, with occasional large emissions of both N 2 O and CH 4 under very wet conditions. Average N 2 O fluxes from the cell with the saturated zone were almost five-fold greater (65.6 μg N 2 O–N m −2 h −1 ) than from the other cell (13.7 μg N 2 O–N m −2 h −1 ), with peaks up to 1100 μg N 2 O–N m −2 h −1 . These N 2 O fluxes are of similar magnitude to those measured in other urban soils, but with larger peak emissions. The CH 4 sink strength of the cell with the saturated zone (− 3.8 μg CH 4 –C m −2 h −1 ) was lower than the other cell (− 18.3 μg CH 4 –C m −2 h −1 ). Both cells of the biofilter appeared to take up CH 4 at similar rates to other urban lawn systems; however, the biofilter cells displayed occasional large CH 4 emissions following inflow events, which were not seen in other urban systems. CO 2 fluxes increased with soil temperature in both cells, and

Critical machine cluster identification using the equal area criterion

DEFF Research Database (Denmark)

Weckesser, Johannes Tilman Gabriel; Jóhannsson, Hjörtur; Østergaard, Jacob

2015-01-01

The paper introduces a new method to early identify the critical machine cluster (CMC) after a transient disturbance. For transient stability assessment with methods based on the equal area criterion it is necessary to split the generators into a group of critical and non-critical machines....... The generators in the CMC are those likely to lose synchronism. The early and reliable identification of the CMC is crucial and one of the major challenges. The proposed new approach is based on the assessment of the rotor dynamics between two machines and the evaluation of their coupling strength. A novel...

Socio-Demographic and Lifestyle-Related Characteristics Associated with Self-Reported Any, Daily and Occasional Smoking during Pregnancy

OpenAIRE

Baron, Ruth; Manni?n, Judith; de Jonge, Ank; Heymans, Martijn W.; Klomp, Trudy; Hutton, Eileen K.; Brug, Johannes

2013-01-01

Smoking during pregnancy is a risk factor for various adverse birth outcomes. In order to develop effective interventions, insight is needed into the characteristics associated with pregnant women who smoke. Unknown is whether these characteristics differ for women who smoke daily and women who smoke occasionally. Our study sample, drawn from the DELIVER study (Sept 2009-March 2011), consisted of 6107 pregnant women in primary care in the Netherlands who were up to 34 weeks pregnant. The asso...

Acute effects of ayahuasca on neuropsychological performance: differences in executive function between experienced and occasional users.

Science.gov (United States)

Bouso, José Carlos; Fábregas, Josep Maria; Antonijoan, Rosa Maria; Rodríguez-Fornells, Antoni; Riba, Jordi

2013-12-01

Ayahuasca, a South American psychotropic plant tea containing the psychedelic 5-HT2A receptor agonist N,N-dimethyltryptamine, has been shown to increase regional cerebral blood flow in prefrontal brain regions after acute administration to humans. Despite interactions at this level, neuropsychological studies have not found cognitive deficits in abstinent long-term users. Here, we wished to investigate the effects of acute ayahuasca intake on neuropsychological performance, specifically on working memory and executive function. Twenty-four ayahuasca users (11 long-term experienced users and 13 occasional users) were assessed in their habitual setting using the Stroop, Sternberg, and Tower of London tasks prior to and following ayahuasca intake. Errors in the Sternberg task increased, whereas reaction times in the Stroop task decreased and accuracy was maintained for the whole sample following ayahuasca intake. Interestingly, results in the Tower of London showed significantly increased execution and resolution times and number of movements for the occasional but not the experienced users. Additionally, a correlation analysis including all subjects showed that impaired performance in the Tower of London was inversely correlated with lifetime ayahuasca use. Acute ayahuasca administration impaired working memory but decreased stimulus-response interference. Interestingly, detrimental effects on higher cognition were only observed in the less experienced group. Rather than leading to increased impairment, greater prior exposure to ayahuasca was associated with reduced incapacitation. Compensatory or neuromodulatory effects associated with long-term ayahuasca intake could underlie preserved executive function in experienced users.

Endurance of high molecular weight carboxymethyl cellulose in corrosive environments

Science.gov (United States)

Murodov, M. M.; Rahmanberdiev, G. R.; Khalikov, M. M.; Egamberdiev, E. A.; Negmatova, K. C.; Saidov, M. M.; Mahmudova, N.

2012-07-01

Lignin obtained from the waste cooking liquor, formed after soda pulping process, is used as an inhibitor of NaCMC thermo oxidative degradation in presence of in extreme conditions during drilling oil wells. In this paper the schematic process of obtaining NaCMC by the principle of "monoapparat" on the basis of cellulose produced by non-wood cellulose materials is presented.

Comparing the Effects of Negative and Mixed Emotional Messages on Predicted Occasional Excessive Drinking

Directory of Open Access Journals (Sweden)

Pilar Carrera

2008-01-01

Full Text Available In this work we present two types of emotional message, negative (sadness versus mixed (joy and sadness, with the aim of studying their differential effect on attitude change and the probability estimated by participants of repeating the behavior of occasional excessive drinking in the near future. The results show that for the group of participants with moderate experience in this behavior the negative message, compared to the mixed one, is associated with higher probability of repeating the risk behavior and a less negative attitude toward it. These results suggest that mixed emotional messages (e.g. joy and sadness messages could be more effective in campaigns for the prevention of this risk behavior.

Comparing the effects of negative and mixed emotional messages on predicted occasional excessive drinking.

Science.gov (United States)

Carrera, Pilar; Caballero, Amparo; Muñoz, Dolores

2008-01-01

In this work we present two types of emotional message, negative (sadness) versus mixed (joy and sadness), with the aim of studying their differential effect on attitude change and the probability estimated by participants of repeating the behavior of occasional excessive drinking in the near future. The results show that for the group of participants with moderate experience in this behavior the negative message, compared to the mixed one, is associated with higher probability of repeating the risk behavior and a less negative attitude toward it. These results suggest that mixed emotional messages (e.g. joy and sadness messages) could be more effective in campaigns for the prevention of this risk behavior.

A new manganese-based oral contrast agent (CMC-001) for liver MRI. Pharmacological and pharmaceutical aspects

International Nuclear Information System (INIS)

Joergensen, Jan Troest; Rief, Matthias; Wagner, Moritz; Brismar, Torkel B.; Albiin, Nils

2012-01-01

Manganese is one of the most abundant metals on earth and is found as a component of more than 100 different minerals. Besides being an essential trace element in relation to the metabolic processes in the body, manganese is also a paramagnetic metal that possesses similar characteristics to gadolinium with regards to T1-weighted (T1-w) magnetic resonance imaging (MRI). Manganese, in the form of manganese (II) chloride tetrahydrate, is the active substance in a new targeted oral contrast agent, currently known as CMC-001, indicated for hepatobiliary MRI. Under physiological circumstances manganese is poorly absorbed from the intestine after oral intake, but by the use of specific absorption promoters, L-alanine and vitamin D3, it is possible to obtain a sufficiently high concentration in the liver in order to achieve a significant signal enhancing effect. In the liver manganese is exposed to a very high first-pass effect, up to 98 %, which prevents the metal from reaching the systemic circulation, thereby reducing the number of systemic side-effects. Manganese is one of the least toxic trace elements, and due to its favorable safety profile it may be an attractive alternative to gadolinium-based contrast agents for patients undergoing an MRI evaluation for liver metastases in the future. In this review the basic pharmacological and pharmaceutical aspects of this new targeted oral hepatobiliary specific contrast agent will be discussed

Cellulosic hydrogen production with a sequencing bacterial hydrolysis and dark fermentation strategy.

Science.gov (United States)

Lo, Yung-Chung; Bai, Ming-Der; Chen, Wen-Ming; Chang, Jo-Shu

2008-11-01

In this study, cellulose hydrolysis activity of two mixed bacterial consortia (NS and QS) was investigated. Combination of NS culture and BHM medium exhibited better hydrolytic activity under the optimal condition of 35 degrees C, initial pH 7.0, and 100rpm agitation. The NS culture could hydrolyze carboxymethyl cellulose (CMC), rice husk, bagasse and filter paper, among which CMC gave the best hydrolysis performance. The CMC hydrolysis efficiency increased with increasing CMC concentration from 5 to 50g/l. With a CMC concentration of 10g/l, the total reducing sugar (RS) production and the RS producing rate reached 5531.0mg/l and 92.9mg/l/h, respectively. Furthermore, seven H2-producing bacterial isolates (mainly Clostridium species) were used to convert the cellulose hydrolysate into H2 energy. With an initial RS concentration of 0.8g/l, the H2 production and yield was approximately 23.8ml/l and 1.21mmol H2/g RS (0.097mmol H2/g cellulose), respectively.

Occasional large emissions of nitrous oxide and methane observed in stormwater biofiltration systems

Energy Technology Data Exchange (ETDEWEB)

Grover, Samantha P.P., E-mail: samantha.grover@monash.edu [Department of Civil Engineering, Monash University, Clayton, Victoria, 3800 (Australia); Cohan, Amanda, E-mail: acoh5@student.monash.edu [Department of Civil Engineering, Monash University, Clayton, Victoria, 3800 (Australia); Chan, Hon Sen, E-mail: hon.sen.chan@gmail.com [Department of Civil Engineering, Monash University, Clayton, Victoria, 3800 (Australia); Livesley, Stephen J., E-mail: sjlive@unimelb.edu.au [Department of Resource Management and Geography, The University of Melbourne, Richmond, Victoria, 3121 (Australia); Beringer, Jason, E-mail: jason.beringer@monash.edu [School of Geography and Environmental Science, Monash University, Clayton, Victoria, 3800 (Australia); Monash Water for Liveability, Monash University, Clayton, Victoria, 3800 (Australia); Daly, Edoardo, E-mail: edoardo.daly@monash.edu [Department of Civil Engineering, Monash University, Clayton, Victoria, 3800 (Australia); Monash Water for Liveability, Monash University, Clayton, Victoria, 3800 (Australia)

2013-11-01

Designed, green infrastructures are becoming a customary feature of the urban landscape. Sustainable technologies for stormwater management, and biofilters in particular, are increasingly used to reduce stormwater runoff volumes and peaks as well as improve the water quality of runoff discharged into urban water bodies. Although a lot of research has been devoted to these technologies, their effect in terms of greenhouse gas fluxes in urban areas has not been yet investigated. We present the first study aimed at quantifying greenhouse gas fluxes between the soil of stormwater biofilters and the atmosphere. N{sub 2}O, CH{sub 4}, and CO{sub 2} were measured periodically over a year in two operational vegetated biofiltration cells at Monash University in Melbourne, Australia. One cell had a saturated zone at the bottom, and compost and hardwood mulch added to the sandy loam filter media. The other cell had no saturated zone and was composed of sandy loam. Similar sedges were planted in both cells. The biofilter soil was a small N{sub 2}O source and a sink for CH{sub 4} for most measurement events, with occasional large emissions of both N{sub 2}O and CH{sub 4} under very wet conditions. Average N{sub 2}O fluxes from the cell with the saturated zone were almost five-fold greater (65.6 μg N{sub 2}O–N m{sup −2} h{sup −1}) than from the other cell (13.7 μg N{sub 2}O–N m{sup −2} h{sup −1}), with peaks up to 1100 μg N{sub 2}O–N m{sup −2} h{sup −1}. These N{sub 2}O fluxes are of similar magnitude to those measured in other urban soils, but with larger peak emissions. The CH{sub 4} sink strength of the cell with the saturated zone (− 3.8 μg CH{sub 4}–C m{sup −2} h{sup −1}) was lower than the other cell (− 18.3 μg CH{sub 4}–C m{sup −2} h{sup −1}). Both cells of the biofilter appeared to take up CH{sub 4} at similar rates to other urban lawn systems; however, the biofilter cells displayed occasional large CH{sub 4} emissions following

Online recovery of radiocesium from soil, cellulose and plant samples by supercritical fluid extraction employing crown ethers and calix-crown derivatives as extractants

International Nuclear Information System (INIS)

Kanekar, A.S.; Pathak, P.N.; Mohapatra, P.K.

2014-01-01

Two crown ethers (CEs) viz. dibenzo18crown6, and dibenzo12crown7 and three calix-crown derivatives viz. (octyloxy)calix[4]arene-mono-crown-6 (CMC), calix[4]arene-bis(o-benzocrown-6) (CBC), and calix[4]arene-bis(naphthocrown-6) (CNC) were evaluated for the recovery of 137 Cs from synthetic soil, cellulose (tissue paper), and plant samples by supercritical fluid extraction (SFE) route. CEs showed poor extraction of 137 Cs from soil matrix. SFE experiments using 1 × 10 -3 M solutions of CMC, CBC and CNC in acetonitrile at 3 M HNO 3 as modifiers displayed better extraction of 137 Cs, viz. 21(±2) % (CMC), 16.5(±3) % (CBC), and 4(±1) % (CNC). It was not possible to recover 137 Cs quantitatively from soil matrix. The inefficient extraction of 137 Cs from soil matrix was attributed to its incorporation into the interstitial sites. Experiments on tissue papers using CMC showed near quantitative 137 Cs recovery. On the other hand, recovery from plant samples varied between 50(±5) % (for stems) and 75(±5) % (for leaves). (author)

Polyethylene glycol 3350 in occasional constipation: A one-week, randomized, placebo-controlled, double-blind trial.

Science.gov (United States)

McGraw, Thomas

2016-05-06

To evaluate the efficacy and safety of polyethylene glycol (PEG) 3350 in subjects with self-reported occasional constipation. Eligible subjects ≥ 17 years of age were randomized to receive either placebo or PEG 3350 17 g once daily in this multicenter, double-blind trial. Evaluations were conducted before (baseline) and after a 7-d treatment period. The primary efficacy variable was the proportion of subjects reporting complete resolution of straining and hard or lumpy stools. Secondary efficacy variables assessed the severity of the subjects' daily bowel movement (BM) symptoms, and preference of laxatives based on diary entries, visual analog scale scores, and questionnaires. Of the 203 subjects enrolled in the study, 11 had major protocol violations. Complete resolution was noted by 36/98 (36.7%) subjects in the PEG 3350 group and 23/94 (24.5%) in the placebo group (P = 0.0595). The number of complete BMs without straining or lumpy stools was similar between both groups. Subjects receiving PEG 3350 experienced significant relief in straining and reduction in hardness of stools over a 7-d period (P PEG 3350 had a better effect on their daily lives, provided better control over a BM, better relief from constipation, cramping, and bloating, and was their preferred laxative. Adverse events (AEs) were balanced between the PEG 3350 and the placebo groups. No deaths, serious AEs, or discontinuations due to AEs were reported. This trial is registered at clinicaltrials.gov as NCT00770432. Oral administration of 17 g PEG 3350 once daily for a week is effective, safe, and well tolerated in subjects with occasional constipation.

Chemical Compounds Recovery in Carboxymethyl Cellulose Wastewater Treatment

Directory of Open Access Journals (Sweden)

P.-H. Rao

2015-05-01

Full Text Available Carboxymethyl cellulose (CMC is a kind of cellulose ether widely used in industrial production. CMC wastewater usually have high chemical oxygen demand (COD and salinity (>10 %, which result from organic and inorganic by-products during CMC production. It is significant that the wastewater is pretreated to decrease salinity and recover valuable organics before biochemical methods are employed. In this paper, distillation-extraction method was used to pretreat CMC wastewater and recover valuable chemical compounds from wastewater (Fig. 1. Initial pH of CMC wastewater was adjusted to different values (6.5, 8.5, 9.5, 10.5, 12.0 before distillation to study the effect of pH on by-products in wastewater. By-products obtained from CMC wastewater were extracted and characterized by NMR, XRD and TGA. Distillate obtained from distillation of wastewater was treated using biological method, i.e., upflow anaerobic sludge blanket (UASB-contact oxidation process. Domestic sewage and flushing water from manufacturing shop was added into distillate to decrease initial COD and increase nutrients such as N, P, K. Experimental results showed that by-products extracted from CMC wastewater mainly include ethoxyacetic acid and NaCl, which were confirmed by NMR and XRD (Fig. 2. TGA results of by-products indicated that the content of NaCl in inorganic by-products reached 96 %. Increasing initial pH value of CMC wastewater might significantly raise the purity of ethoxyacetic acid in organic by-products. UASB-contact oxidation process showed a good resistance to shock loading. Results of 45-day continuous operation revealed that CODCr of final effluent might be controlled below 500 mg l−1 and meet Shanghai Industrial Wastewater Discharge Standard (CODCr −1, which indicated that the treatment process in this study was appropriate to treat distillate of wastewater from CMC production industry.

Cooperative Monitoring Center Occasional Paper/4: Missile Control in South Asia and the Role of Cooperative Monitoring Technology

Energy Technology Data Exchange (ETDEWEB)

Kamal, N.; Sawhney, P.

1998-10-01

The succession of nuclear tests by India and Pakistan in May 1998 has changed the nature of their missile rivalry, which is only one of numerous manifestations of their relationship as hardened adversaries, deeply sensitive to each other's existing and evolving defense capabilities. The political context surrounding this costly rivalry remains unmediated by arms control measures or by any nascent prospect of detente. As a parallel development, sensible voices in both countries will continue to talk of building mutual confidence through openness to avert accidents, misjudgments, and misinterpretations. To facilitate a future peace process, this paper offers possible suggestions for stabilization that could be applied to India's and Pakistan's missile situation. Appendices include descriptions of existing missile agreements that have contributed to better relations for other countries as well as a list of the cooperative monitoring technologies available to provide information useful in implementing subcontinent missile regimes.

Shadows in the Wings: The Next Educational Reform. Occasional Paper No. 1.

Science.gov (United States)

Berryman, Sue E.

Skill requirements for the economy are changing. Whereas many jobs in industries such as insurance and banking once required high school graduates to do clerical work, computerization has changed the requirements. Job functions are combined, and many jobs now require college graduates to do analytical work. Although these skill changes require…

Cigarette Brand Preferences among Adolescents. Monitoring the Future Occasional Paper No. 45.

Science.gov (United States)

Johnston, Lloyd D.; O'Malley, Patrick M.; Bachman, Jerald G.; Schulenberg, John E.

This report discusses findings from the Monitoring the Future study in relation to adolescent cigarette preferences. Results show that in 1998, 19.1% of the eighth graders, 27.6% of the tenth graders, and 35.1% of the twelfth graders reported smoking within 30 days prior to the survey. By the time they finish high school, 65.2% of American young…

Non-Formal Education and Farm Cooperatives in West Africa. Occasional Paper #8.

Science.gov (United States)

Belloncle, Guy

Although failures have been encountered in the West African cooperative movement, farm cooperatives are an indispensable tool for rural development. They can generate an investment budget at the village level and can provide a stimulating framework for education. The Senegalese farm cooperative movement has experienced a number of problems. Three…

Teaching through a Crisis: September 11 and Beyond. Occasional Paper Series 11

Science.gov (United States)

McKersie, Alison; Lent, Patricia; Rose, Megan; Stuart-Hunt, Rella; Edstrom, Lisa; Rothschild, Cynthia R.; Weisman, Alexandra; Delacorte, Kate; Vascellaro, Sal; Abell, Kate

2003-01-01

The days following September 11, 2001, were characterized for many by a startling clarity, as if someone had applied a magnified lens to life's everyday routines and every moment, every gesture, every word exchanged with friends, colleagues and family was more nuanced and precious than before. The decision to publish this volume of essays was…

National Identity and Language in Multi-Ethnic Latin America. Occasional Papers, 24.

Science.gov (United States)

Mar-Molinero, Clare

A discussion of the relationship between national identity and language in Spanish-speaking Latin America focuses on issues concerning indigenous languages, education, and literacy. The sociolinguistic history and configuration Spanish-speaking Latin America are outlined briefly, noting the influences of indigenous populations, non-Spanish…

Obstacles to Disarmament Education. Centre for Peace Studies Occasional Paper No. 6.

Science.gov (United States)

Reardon, Betty

Obstacles to disarmament education fall into three general categories: political, perceptual, and pedagogical. At the elementary school level, these obstacles occur because of: (1) a lack of opportunities for cross-cultural experiences; (2) the socialization processes that enforce the belief that a child's culture is superior to and competitive…

Lower-Level Qualifications as a Stepping Stone for Young People. Occasional Paper

Science.gov (United States)

Oliver, Damian

2012-01-01

Lower-level qualifications (certificate I and II programs) provide little or no immediate return to the individual in terms of increased wages. However, lower-level qualifications are intended to prepare students who would otherwise not be capable of enrolling in and completing a higher-level qualification or making a successful transition into…

Relevance Theory and the Language of Advertising. CLS Occasional Paper No. 31.

Science.gov (United States)

Byrne, Barbara

Relevance theory, the premise that a hearer will make the effort to process a communication if he or she feels it will alter or enrich his/her cognitive environment, can be useful for increasing the effectiveness of advertising communication. It is particularly helpful for analyzing and improving the effectiveness of the creative devices often…

Getting Things Done. A Learning Package for Process Skills. An Occasional Paper.

Science.gov (United States)

Taylor, Max

This manual is designed to help teachers and tutors implement a 4-day modular course in the skills and processes necessary to get things done. The aims and content of the course are described. A course summary is provided along with a model course program that includes parallel lists of objectives, suggested learning activities and text materials,…

Research in Progress--Update April 1990. Occasional Paper InTER/14/90.

Science.gov (United States)

Boots, Maureen, Comp.

This document contains abstracts of 29 research projects in progress in Great Britain divided into six sections: (1) the current phase of Information Technology in Education Research (InTER) programs on groupwork with computers, tools for exploratory learning, conceptual change in science, and bubble dialogue as an ethnographic research tool; (2)…

Students, History Textbooks, and the Hidden Dimension. Occasional Paper Number 77-1.

Science.gov (United States)

Kingman, Barry

Since history textbooks omit and/or emphasize certain data, students are left with a false sense of history. Although the "hard data" presented in history texts is generally regarded as reliable, the selection and organization of that data is inherently manipulative because other data has been excluded. Because authors do not begin with a…

Solar Energy: A Middle School Unit. Environmental Education Occasional Paper No. 2.

Science.gov (United States)

Mason, Jack L.; Cantrell, Joseph S.

This collection of teaching activities was developed to provide teachers with guidance in presenting solar energy education to students of middle school age. The unit provides activities presenting learning opportunities involving: (1) passive solar collectors, (2) active solar collectors, (3) concentrating collectors, and (4) photovoltaic cell…

Dechlorination of 2,4-dichlorophenoxyacetic acid by sodium carboxymethyl cellulose-stabilized Pd/Fe nanoparticles

International Nuclear Information System (INIS)

Zhou, Hongyi; Han, Jian; Baig, Shams Ali; Xu, Xinhua

2011-01-01

Highlights: ► CMC-stabilized Pd/Fe nanoparticles were synthesized and used for 2,4-D removal. ► Particle stability, ζ-potential and IEP of non- and stabilized Pd/Fe were compared. ► Dechlorination of 2,4-D by different Pd/Fe systems was investigated. ► The reaction mechanism has been discussed and presented in the article. ► Effects of CMC/Fe mass ratio and pH were also investigated. - Abstract: This paper describes the synthesis of sodium carboxymethyl cellulose (CMC)-stabilized Pd/Fe nanoparticles and their applications to the dechlorination of 2,4-dichlorophenoxyacetic acid (2,4-D) under controlled laboratorial conditions. For this purpose batch mode experiments were conducted to understand the effects of CMC on the surface characteristics of Pd/Fe nanoparticles, optimum removal of 2,4-D and other surface interactions mechanism. Our experimental results demonstrated considerable enhancements in particle stability and chemical reactivity with the addition of CMC to Pd/Fe nanoparticles. Transmission electron microscopy (TEM) analysis indicated that CMC-stabilized Pd/Fe nanoparticles were well dispersed, and nanoparticles remained in suspension for days compared to non-stabilized Pd/Fe nanoparticles precipitated within minutes. The isoelectric point (IEP) of the nanoparticles shifted from pH 6.5 to 2.5, suggesting that CMC-stabilized Pd/Fe nanoparticles were negatively charged over a wider pH range. Our batch experiments demonstrated that CMC-stabilized Pd/Fe nanoparticles (0.6 g Fe L −1 ) were able to remove much higher levels of 2,4-D with only one intermediate 2-chlorophenoxyacetic acid (2-CPA) and the final organic product phenoxyacetic acid (PA), than non-stabilized Pd/Fe nanoparticles or microsized Pd/Fe particles. The removal percentage of 2,4-D increased from 10% to nearly 100% as the reaction pH decreased from 11.5 to 2.5. The optimal CMC/Fe mass ratio for the dechlorination of 2,4-D was determined to be 5/1, and the removal of 2,4-D was

An occasional diagnosis of myasthenia gravis - a focus on thymus during cardiac surgery: a case report

Directory of Open Access Journals (Sweden)

Dainese Luca

2009-10-01

Full Text Available Abstract Background Myasthenia gravis, an uncommon autoimmune syndrome, is commonly associated with thymus abnormalities. Thymomatous myasthenia gravis is considered to have worst prognosis and thymectomy can reverse symptoms if precociously performed. Case report We describe a case of a patient who underwent mitral valve repair and was found to have an occasional thymomatous mass during the surgery. A total thymectomy was performed concomitantly to the mitral valve repair. Conclusion The diagnosis of thymomatous myasthenia gravis was confirmed postoperatively. Following the surgery this patient was strictly monitored and at 1-year follow-up a complete stable remission had been successfully achieved.

A comprehensive evaluation of the toxicology of experimental cigarettes manufactured with banded papers.

Science.gov (United States)

Werley, Michael S; Jerome, Ann M; DeSoi, Darren J; Coggins, Christopher R E; Oldham, Michael J; McKinney, Willie J

2013-01-01

To comply with state requirements, cigarette manufacturers have added low-permeability bands to the cigarette paper. These bands can extinguish the cigarette when it is no longer being puffed by a smoker. This study was conducted to evaluate the toxicology resulting from the addition of different types of bands to experimental cigarettes. A battery of assays that are typically used in toxicology studies with cigarette smoke, namely smoke chemistry, in vitro mutagenicity and cytotoxicity, and inhalation studies with rats, were used to evaluate different band characteristics added to cigarette paper. Although differences in the amount of band material was associated with an increase in some metals measured in mainstream tobacco smoke, it was not dose responsive to any band design parameter (base paper permeability, band width, band spacing, band chalk amount, or citrate). Occasional, minor differences were produced by the different types of bands; overall, there was no increased toxicity. Although there were increases and decreases in some mainstream smoke constituents, the in vitro and in vivo testing performed demonstrated that low-permeability bands on cigarettes do not modify the toxicity of smoke inhaled by smokers.

Cooperative Monitoring Center Occasional Paper/6: Pakistani Perceptions and Prospects of Reducing the Nuclear Danger in South Asia

Energy Technology Data Exchange (ETDEWEB)

Kamal, N.

1999-01-01

The Indian and Pakistani nuclear tests in May 1998 triggered a full-blown nuclear debate. For the first time, hard-liners, moderates, and pacifists engaged in an extensive public discussion that helped to make the people of Pakistan more sensitive to the dangers of nuclear competition. Pakistan's concerns about its conventional military inferiority, both in the present and future, and the belief that nuclear capability would deter India from exerting its superior military strength, constituted the bedrock of its perception on the nuclear issue. Ofilcial Pakistani statements, both immediately after the nuclear tests and later, have advocated restraint on the issue of nuclearization, indicating cognizance of the importance of avoiding a regional nuclear arms competition, both for security and economic reasons. This paper suggests a variety of nonweaponization and nondeployment options that would serve the security interests of India and Pakistan. Besides preventing a hair-trigger situation, these options could reduce the financial and logistical burden of ensuring the safety and security of nuclear weapons as well as lower strategic threat-perceptions.

Motivations and Benefits of Student Volunteering: Comparing Regular, Occasional, and Non-Volunteers in Five Countries

Directory of Open Access Journals (Sweden)

Karen Smith

2010-01-01

Full Text Available Programmes targeting student volunteering and service learning are part of encouraging civic behaviour amongst young people. This article reports on a large scale international survey comparing volunteering amongst tertiary students at universities in Australia, Canada, New Zealand, the United Kingdom, and the United States of America. The data revealed high rates of student volunteering and the popularity of occasional or episodic volunteering. There were strong commonalities in student volunteering behaviour, motivations and benefits across the five Western predominately English-speaking countries. Altruism and self-orientated career motivations and benefits were most important to students; however volunteering and non-volunteering students differed in the relative value they attached to volunteering for CV-enhancement and social factors.

Training Southeast Asian Women for Employment: Public Policies and Community Programs, 1975-1985. Southeast Asian Refugee Studies Occasional Papers Number Four.

Science.gov (United States)

Mason, Sarah R.

This paper evaluates the effect of Federal resettlement policy on Southeast Asian refugee women's employment training programs and describes the extent to which this training contributed to the refugees' economic mobility and acculturation. The report is divided into three major sections. Part 1 introduces the study by discussing its background,…

Comparative study of cellulolytic activity of three rumen fungi on different substrates

Directory of Open Access Journals (Sweden)

Atanasova-Pančevska Natalija

2011-01-01

Full Text Available Anaerobic chytridiomycete fungi are found in the gastrointestinal tracts of many domesticated ruminant and nonruminant herbivores and of a wide variety of wild herbivorous mammals. They produce high levels of cellulases and hemicellulases; these enzymes are regulated by substrate (especially soluble sugars available to the organisms. The aim of this paper was to do a comparative study of cellulolytic activity of three rumen fungi on carboxymethyl cellulose and Avicel. The capacity of enzymes was determined by monitoring the growth on carboxymethyl cellulose (CMC and Avicel. Enzyme activity was detected extracellularly in culture supernatants after vegetative growth. All of the isolates degraded CMC and avicel, and exhibited cellulolytic activities (carboxymethyl cellulose-(CMC-ase and avicelase.

Transferrin-Modified Nanoparticles for Photodynamic Therapy Enhance the Antitumor Efficacy of Hypocrellin A

Directory of Open Access Journals (Sweden)

Xi Lin

2017-11-01

Full Text Available Photodynamic therapy (PDT has emerged as a potent novel therapeutic modality that induces cell death through light-induced activation of photosensitizer. But some photosensitizers have characteristics of poor water-solubility and non-specific tissue distribution. These characteristics become main obstacles of PDT. In this paper, we synthesized a targeting drug delivery system (TDDS to improve the water-solubility of photosensitizer and enhance the ability of targeted TFR positive tumor cells. TDDS is a transferrin-modified Poly(D,L-Lactide-co-glycolide (PLGA and carboxymethyl chitosan (CMC nanoparticle loaded with a photosensitizer hypocrellin A (HA, named TF-HA-CMC-PLGA NPs. Morphology, size distribution, Fourier transform infrared (FT-IR spectra, encapsulation efficiency, and loading capacity of TF-HA-CMC-PLGA NPs were characterized. In vitro TF-HA-CMC-PLGA NPs presented weak dark cytotoxicity and significant photo-cytotoxicity with strong reactive oxygen species (ROS generation and apoptotic cancer cell death. In vivo photodynamic antitumor efficacy of TF-HA-CMC-PLGA NPs was investigated with an A549 (TFR positive tumor-bearing model in male athymic nude mice. TF-HA-CMC-PLGA NPs caused tumor delay with a remarkable tumor inhibition rate of 63% for 15 days. Extensive cell apoptosis in tumor tissue and slight side effects in normal organs were observed. The results indicated that TDDS has great potential to enhance PDT therapeutic efficacy.

Can virtual seminars be used cost‐effectively to enhance student learning?

OpenAIRE

Halfpenny, Peter; Wellings, Sonja

2001-01-01

This paper describes a virtual seminar initiative designed to investigate the extent to which computer‐mediated communication (CMC) can cost‐effectively strengthen staff‐student interaction and enhance student group discussion, and thereby improve collaborative learning. After setting the scene by means of a brief review of the discursive potential of CMC, the establishment of an asynchronous bulletin board system on three modules in the Department of Sociology at the University of Manchester...

The contribution of Ebola viral load at admission and other patient characteristics to mortality in a Médecins Sans Frontières (MSF) Ebola Case Management Centre (CMC), Kailahun, Sierra Leone, June -October, 2014.

LENUS (Irish Health Repository)

Fitzpatrick, Gabriel

2015-05-22

This paper describes patient characteristics, including Ebola viral load, associated with mortality in an MSF Ebola case management centre. Out of 780 admissions between June and October 2014, 525 (67%) were positive for Ebola with a known outcome. The crude mortality rate was 51% (270\\/525). Ebola viral load (whole blood sample) data was available on 76% (397\\/525) of patients. Univariate analysis indicated viral load at admission, age, symptom duration prior to admission and distance travelled to the CMC were associated with mortality (p value<0.05). The multivariable model predicted mortality in those with a viral load at admission greater than 10 million copies per millilitre (p value<0.05, Odds Ratio>10), aged 50 years or more (p value=0.08, Odds Ratio=2) and symptom duration prior to admission less than 5 days (p value=0.14). The presence of confusion, diarrhoea and conjunctivitis were significantly higher (p value<0.05) in Ebola patients who died. These findings highlight the importance viral load at admission has on mortality outcomes and could be used to cohort cases with viral loads greater than 10 million copies into dedicated wards with more intensive medical support to further reduce mortality.

Piloting a new approach: making use of technology to present a distance learning computer science course

Directory of Open Access Journals (Sweden)

Tina Wilson

1996-12-01

Full Text Available Teaching projects which make use of new technology are becoming of interest to all academic institutions in the UK due to economic pressure to increase student numbers. CMC (Computer- Mediated Communication such as computer conferencing appears an attractive solution to higher education's 'numbers' problem, with the added benefit that it is free from time and place constraints. Researchers have discussed CMC from a number of different perspectives, for example Mason and Kaye (1989 describe a CMC system as a system of interactivity between tutors, students, resources and organizational structure. Steeples et al (1993 consider CMC in terms of group cohesion, modes of discourse and intervention strategies to stimulate and structure participation. Goodyear et al (1994 discuss the Just in Time (TT-Based Open Learning (JTTOL model in terms of a set of educational beliefs, role definitions, working methods and learning resources, together with a definition of infrastructure requirements for CMC. Shedletsky (1993 suggests that a CMC should be viewed in terms of an 'intrapersonal communication' model, while Mayes et al (1994 identify three types of learning which is mediated by telematics, that is, learning by conceptualization, construction and dialogue. Other researchers, such as Velayo (1994, describe the teacher as 'an active agent', and present a model for computer conferencing which neglects the social aspect of CMC, while Berge (1995 mentions the importance of social activity between students and the importance of the role of the moderator. From these accounts, there appear to be a number of dimensions which can be used to evaluate CMC. Not all researchers emphasize the same dimensions; however, this paper proposes that computer conferencing systems should be designed to encourage students to participate in all three of the following dimensions. These can be summarized as: (a a knowledge dimension (includes domain and meta knowledge; (b a social

Dechlorination of 2,4-dichlorophenoxyacetic acid by sodium carboxymethyl cellulose-stabilized Pd/Fe nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Zhou, Hongyi, E-mail: zhouhy@zjut.edu.cn [College of Biological and Environmental Engineering, Zhejiang University of Technology, Hangzhou 310032 (China); Han, Jian [College of Biological and Environmental Engineering, Zhejiang University of Technology, Hangzhou 310032 (China); Baig, Shams Ali; Xu, Xinhua [Department of Environmental Engineering, Zhejiang University, Hangzhou 310027 (China)

2011-12-30

Highlights: Black-Right-Pointing-Pointer CMC-stabilized Pd/Fe nanoparticles were synthesized and used for 2,4-D removal. Black-Right-Pointing-Pointer Particle stability, {zeta}-potential and IEP of non- and stabilized Pd/Fe were compared. Black-Right-Pointing-Pointer Dechlorination of 2,4-D by different Pd/Fe systems was investigated. Black-Right-Pointing-Pointer The reaction mechanism has been discussed and presented in the article. Black-Right-Pointing-Pointer Effects of CMC/Fe mass ratio and pH were also investigated. - Abstract: This paper describes the synthesis of sodium carboxymethyl cellulose (CMC)-stabilized Pd/Fe nanoparticles and their applications to the dechlorination of 2,4-dichlorophenoxyacetic acid (2,4-D) under controlled laboratorial conditions. For this purpose batch mode experiments were conducted to understand the effects of CMC on the surface characteristics of Pd/Fe nanoparticles, optimum removal of 2,4-D and other surface interactions mechanism. Our experimental results demonstrated considerable enhancements in particle stability and chemical reactivity with the addition of CMC to Pd/Fe nanoparticles. Transmission electron microscopy (TEM) analysis indicated that CMC-stabilized Pd/Fe nanoparticles were well dispersed, and nanoparticles remained in suspension for days compared to non-stabilized Pd/Fe nanoparticles precipitated within minutes. The isoelectric point (IEP) of the nanoparticles shifted from pH 6.5 to 2.5, suggesting that CMC-stabilized Pd/Fe nanoparticles were negatively charged over a wider pH range. Our batch experiments demonstrated that CMC-stabilized Pd/Fe nanoparticles (0.6 g Fe L{sup -1}) were able to remove much higher levels of 2,4-D with only one intermediate 2-chlorophenoxyacetic acid (2-CPA) and the final organic product phenoxyacetic acid (PA), than non-stabilized Pd/Fe nanoparticles or microsized Pd/Fe particles. The removal percentage of 2,4-D increased from 10% to nearly 100% as the reaction pH decreased from 11

Preparation of minor ginsenosides C-Mc, C-Y, F2, and C-K from American ginseng PPD-ginsenoside using special ginsenosidase type-I from Aspergillus niger g.848.

Science.gov (United States)

Liu, Chun-Ying; Zhou, Rui-Xin; Sun, Chang-Kai; Jin, Ying-Hua; Yu, Hong-Shan; Zhang, Tian-Yang; Xu, Long-Quan; Jin, Feng-Xie

2015-07-01

Minor ginsenosides, those having low content in ginseng, have higher pharmacological activities. To obtain minor ginsenosides, the biotransformation of American ginseng protopanaxadiol (PPD)-ginsenoside was studied using special ginsenosidase type-I from Aspergillus niger g.848. DEAE (diethylaminoethyl)-cellulose and polyacrylamide gel electrophoresis were used in enzyme purification, thin-layer chromatography and high performance liquid chromatography (HPLC) were used in enzyme hydrolysis and kinetics; crude enzyme was used in minor ginsenoside preparation from PPD-ginsenoside; the products were separated with silica-gel-column, and recognized by HPLC and NMR (Nuclear Magnetic Resonance). The enzyme molecular weight was 75 kDa; the enzyme firstly hydrolyzed the C-20 position 20-O-β-D-Glc of ginsenoside Rb1, then the C-3 position 3-O-β-D-Glc with the pathway Rb1→Rd→F2→C-K. However, the enzyme firstly hydrolyzed C-3 position 3-O-β-D-Glc of ginsenoside Rb2 and Rc, finally hydrolyzed 20-O-L-Ara with the pathway Rb2→C-O→C-Y→C-K, and Rc→C-Mc1→C-Mc→C-K. According to enzyme kinetics, K m and V max of Michaelis-Menten equation, the enzyme reaction velocities on ginsenosides were Rb1 > Rb2 > Rc > Rd. However, the pure enzyme yield was only 3.1%, so crude enzyme was used for minor ginsenoside preparation. When the crude enzyme was reacted in 3% American ginseng PPD-ginsenoside (containing Rb1, Rb2, Rc, and Rd) at 45°C and pH 5.0 for 18 h, the main products were minor ginsenosides C-Mc, C-Y, F2, and C-K; average molar yields were 43.7% for C-Mc from Rc, 42.4% for C-Y from Rb2, and 69.5% for F2 and C-K from Rb1 and Rd. Four monomer minor ginsenosides were successfully produced (at low-cost) from the PPD-ginsenosides using crude enzyme.

Virtualization of Research Universities: Raising the Right Questions to Address Key Functions of the Institution. Research & Occasional Paper Series. CSHE.6.03

Science.gov (United States)

Pfeffer, Thomas

2003-01-01

The aim of this paper is to provide an overview of the variety of information and communication technology (ICT) applications at traditional universities and to integrate them into a holistic picture of the institution. Using the distinction of three key elements of scholarly activity (research, publication, education), it suggests a functional…

Catering Education and Training in France. A Comparative Study. Occasional Paper Number 8.

Science.gov (United States)

Rutter, Duncan; Teare, Melvyn

This report revises a 10-year-old study of the hotel and catering industry to reflect the developments during the decade. The report describes current French practices in the industry, including details of the structure of the industry in France and the way the industry works with government to influence the content of vocational education. The…

Outdoor Education: A Product of the Times. Taft Campus Occasional Paper No. 19.

Science.gov (United States)

Hammerman, Donald R.

In the years from 1930 to 1960 a number of socio-cultural forces influenced the emergence of outdoor education with the five major areas of influence including philosophical, social, economical, political and educational factors. Philosophical factors were found in the doctrines of Rousseau, Herbart, Pestalozzi and Spencer with the ideas of…

Artificial Intelligence Applications to Learning and Training. Occasional Paper--InTER/2/88.

Science.gov (United States)

Cumming, Geoff

This report summarizes and interprets the discussions at a seminar on artificial intelligence (AI) training domains and knowledge representations which was sponsored by the United Kingdom Training Commission. The following broad areas are addressed: (1) the context, process, and diversity of requirements of training and training needs; (2)…

Support Tools for Authoring--A Seminar Report. Occasional Paper InTER/7/88.

Science.gov (United States)

Lewis, R., Ed.; Mace, T. D., Ed.

This report summarizes the discussions at a seminar which provided the opportunity for 15 researchers and developers from the United Kingdom and other European countries to consider a number of short, medium, and long-term issues and assist in setting an agenda for future phases of research. The specific goals were: (1) to identify the tools…

Attention and Modality Effects in STM: A Second Look. Occasional Paper No. 14.

Science.gov (United States)

Evans, Thomas; Byers, Joe

The auditory/verbal short-term memory of 64 college students was examined across a wide range of retention intervals (5 seconds to 60 seconds). High attention during interpolated processing was ensured by monitoring rehearsal with a combination of methods, and errors were analyzed for evidence of proactive and intra-unit interference. Recall of…

Distance Education, Efficiency and Scientific Management: Some Doubts. ESTR Occasional Paper Number 12.

Science.gov (United States)

Campion, Mick

The theme of the 1983 Australian and South Pacific External Studies Association concerned developing efficient teaching-learning systems and efficient management systems. Such an emphasis on efficiency was symptomatic in the United States' educational arena to a commitment to the practices of scientific management. The central role accorded to…

From monopoly to markets: Milestones along the road. Occasional paper {number_sign}25

Energy Technology Data Exchange (ETDEWEB)

Olson, W.P. [Maine Public Utilities Commission, ME (United States)

1998-08-01

This report analyzes developments in the electric utility industry using the tools of transaction cost economics. During the last thirty years, the tools of economic analysis have been substantially expanded--notably, Oliver Williamson, building on the insights of Coase and others, has made significant contributions through his work in developing the new institutional economics, of which transaction cost economics reasoning plays a major role. Because of the relevance of the new institutional economics to public utilities and public utility regulation, the theoretical insights of the new institutional economics have been applied to many aspects of public utility industry structure, governance, and regulation. The contributions of Joskow and Schmalensee are most notable, but many other economists have made theoretical and empirical contributions. These insights are very applicable to the issues that policymakers and regulators are likely to address as electric restructuring progresses. The goal of this report is to synthesize the theoretical work on the new institutional economics with the recent developments in the electric utility industry--most notably, the rapid trend toward competition in electric generation, both in the US and abroad. Transaction-cost-economics reasoning provides an analytical structure for understanding the implications of asset specificity, asymmetric and imperfect information, reputation effects, ex ante contracting costs, ex post contract maladaption issues, and issues that arise because contracts are incomplete. The insights that transaction cost economics can provide are very timely to the debates currently going on with respect to electric restructuring issues.

ESL on the Job. The Jantzen Experience. TEAL Occasional Papers, Vol. 1, 1977.

Science.gov (United States)

Laylin, Jan

A pilot course was begun to provide English language training for non-native speakers of English who needed to develop language skills for their work in the garment industry. One advantage to this kind of language learning situation is that the environment provides ready materials, situations, subjects, and practical learning activities. The…

An Investigation of the Combined Effect of Stress, Fatigue and Workload on Human Performance: Position Paper

Science.gov (United States)

Mock, Jessica

2005-01-01

Stress, fatigue, and workload affect worker performance. NSF reported that 61% of respondents state losing concentration at work while 79% occasionally or frequently made errors as a result of being fatigued. Shift work, altered work schedules, long hours of continuous wakefulness, and sleep loss can create sleep and circadian disruptions that degrade waking fundions causing stress and fatigue. Review of the literature has proven void of information that links the combined effects of fatigue, stress, and workload to human performance. This paper will address which occupational factors within stress, fatigue, and workload were identified as occupational contributors to performance changes. The results of this research will be apglied to underlying models and algorithms that will help predict performance changes in control room operators.

Anesthesia for awake craniotomy: a how-to guide for the occasional practitioner.

Science.gov (United States)

Meng, Lingzhong; McDonagh, David L; Berger, Mitchel S; Gelb, Adrian W

2017-05-01

Awake craniotomy (AC), defined as the performance of at least part of an open cranial procedure with the patient awake, has been tied to beneficial outcomes compared with similar surgery under general anesthesia. Improved anesthetic techniques have made a major contribution to the increasing popularity of AC. However, the heterogeneity of practice among institutions doing large numbers of ACs raises questions (often among those who only occasionally perform AC - i.e., practitioners in low-volume AC institutions) as to the ideal anesthetic technique for AC. The procedure presents a variety of decision-making dilemmas, the origins of which are the varying institutional preferences, lack of quality evidence, and several practice controversies. Evidence-based data that support a single anesthetic algorithm for AC are sparse. In this narrative review, the technical nuances of 13 aspects of anesthetic care for AC are discussed based on institutional preferences and available evidence, and the various controversies and research priorities are discussed. The skills, experience, and commitment of both the surgeon and the anesthesiologist are large variables that are likely more important than what the literature suggests about "best" techniques for AC. Optimizing patient outcome is the fundamental goal of the anesthesiologist.

Green economy: un'occasione per le aree montane

Directory of Open Access Journals (Sweden)

Maria Sapone

2013-06-01

Full Text Available È ormai opinione largamente condivisa che l’attuale “crisi” dell’organismo territoriale non sia soltanto economica ma anche ambientale. Quest’ultima tematica unita a quella della green economy potrebbero rappresentare l'occasione di intervenire sui sistemi territoriali non urbani, un tempo vitali per l’economia locale, ed oggi abbandonati a se stessi a favore delle aree urbanizzate, luoghi economicamente più vantaggiosi. Partendo dalle indicazioni del Programma per l’Ambiente delle Nazioni Unite (UNEP si potrebbero definire politiche di sviluppo al fine di migliorare la competitività e l'attrattività dei sistemi territoriali rurali attraverso la valorizzazione delle risorse endogene presenti su tali territori, con l’obiettivo di favorire lo sviluppo ecosostenibile delle diverse attività al fine di creare una rete integrata. La ricerca svolta presenta le diverse dinamiche legate alla creazione di una rete di Eco-Villaggi, con lo scopo di rifunzionalizzare il patrimonio edilizio e urbanistico esistente, migliorando, così, la qualità della vita dei centri montani. Questo modello può rappresentare concretamente una delle possibili soluzioni allo spopolamento, nel conservare e tutelare lo spazio naturale attraverso la promozione della green economy, basata sull’utilizzo di sistemi di produzione sostenibili, nel rispetto dei requisiti ambientali, nell’attivazione di sistemi energetici rinnovabili e nel richiamo turistico del patrimonio storico-culturale della montagna. Infatti queste risorse se gestite nel modo corretto, attraverso una attenta pianificazione territoriale, potrebbero rappresentare il volano per un modello di sviluppo sostenibile e allo stesso tempo potrebbero avviare una riqualificazione e valorizzazione dei borghi rurali, che spesso ospitano un patrimonio architettonico di notevole pregio. Risulta necessario, per i contesti rurali, porre in atto strumenti, modalità e forme innovative d’intervento capaci

[Consideration about chemistry, manufacture and control (CMC) key problems in simplified registration of classical traditional Chinese medicine excellent prescriptions].

Science.gov (United States)

Wang, Zhi-Min; Liu, Ju-Yan; Liu, Xiao-Qian; Wang, De-Qin; Yan, Li-Hua; Zhu, Jin-Jin; Gao, Hui-Min; Li, Chun; Wang, Jin-Yu; Li, Chu-Yuan; Ni, Qing-Chun; Huang, Ji-Sheng; Lin, Juan

2017-05-01

As an outstanding representative of traditional Chinese medicine(TCM) prescriptions accumulated from famous TCM doctors' clinical experiences in past dynasties, classical TCM excellent prescriptions (cTCMeP) are the most valuable part of TCM system. To support the research and development of cTCMeP, a series of regulations and measures were issued to encourage its simplified registration. There is still a long-way to go because many key problems and puzzles about technology, registration and administration in cTCMeP R&D process are not resolved. Based on the analysis of registration and management regulations of botanical drug products in FDA of USA and Japan, and EMA of Europe, the possible key problems and countermeasures in chemistry, manufacture and control (CMC) of simplified registration of cTCMeP were analyzed on the consideration of its actual situation. The method of "reference decoction extract by traditional prescription" (RDETP) was firstly proposed as standard to evaluate the quality and preparation uniformity between the new developing product under simplified registration and traditional original usages of cTCMeP, instead of Standard Decoction method in Japan. "Totality of the evidence" approach, mass balance and bioassay/biological assay of cTCMeP were emphatically suggested to introduce to the quality uniformity evaluation system in the raw drug material, drug substance and final product between the modern product and traditional decoction. Copyright© by the Chinese Pharmaceutical Association.

Computer-mediated communication and interpersonal attraction: an experimental test of two explanatory hypotheses.

Science.gov (United States)

Antheunis, Marjolijn L; Valkenburg, Patti M; Peter, Jochen

2007-12-01

The aims of this study were (a) to investigate the influence of computer-mediated communication (CMC) on interpersonal attraction and (b) to examine two underlying processes in the CMC-interpersonal attraction relationship. We identified two variables that may mediate the influence of CMC on interpersonal attraction: self-disclosure and direct questioning. Focusing on these potential mediating variables, we tested two explanatory hypotheses: the CMC-induced direct questioning hypothesis and the CMC-induced self-disclosure hypothesis. Eighty-one cross-sex dyads were randomly assigned to one of three experimental conditions: text-only CMC, visual CMC, and face-to-face communication. We did not find a direct effect of CMC on interpersonal attraction. However, we did find two positive indirect effects of text-only CMC on interpersonal attraction: text-only CMC stimulated both self-disclosure and direct questioning, both of which in turn enhanced interpersonal attraction. Results are discussed in light of uncertainty reduction theory and CMC theories.

Soil Erosion: Quiet Crisis in the World Economy. Worldwatch Paper 60.

Science.gov (United States)

Brown, Lester R.; Wolf, Edward C.

Although soil erosion is a natural process, it has increased to the point where it far exceeds the natural formation of new soil. However, with only occasional exceptions, national agricultural and population policies have failed to take soil depletion into account. Projections of world food production always incorporate estimates of future…

Effects of Kivia powder on gut health in patients with occasional constipation: a randomized, double-blind, placebo-controlled study.

Science.gov (United States)

Udani, Jay K; Bloom, David W

2013-06-08

To evaluate the efficacy of Kivia powder on supporting overall gut health through the relief of the discomfort of occasional constipation. Randomized, double-blind, placebo-controlled, parallel-group trial. The investigational product for this study was Kivia powder (Vital Food Processors Ltd., Auckland, New Zealand), containing the active ingredient Zyactinase™, 5.5 g taken daily for four weeks. One hundred thirty-eight subjects reporting occasional constipation were screened and 87 were randomized to placebo (n = 44) and product (n = 43). Bowel movement frequency, as measured by both average daily spontaneous bowel movements (SBM) and complete spontaneous bowel movements (CSBM), were the same in both groups at baseline. There were significant increases in spontaneous bowel movements at week 1 (p = 0.001), week 2 (p = 0.001), week 3 (p = 0.000), and week 4 (p = 0.000) compared to baseline. SBM demonstrated significant differences between the treatment group and the placebo group at week 3 (p = 0.000), and week 4 (p = 0.020). The treatment group demonstrated a significantly higher rate of SBM at week 3 (p = 000) and from baseline to week 4 (p = 0.019). Significant increases in complete spontaneous bowel movements were observed at week 1 (p = 0.000), week 2 (p = 0.000), week 3 (p = 0.000), and week 4 (p = 0.000) compared to baseline. Moreover, CSBM was significantly higher for the treatment group compared to placebo at week 2 (p = 0.001). The change in average daily CSBM from baseline to week 2 was significantly higher in the treatment group than in the placebo group (p = 0.004).Abdominal discomfort or pain demonstrated significant differences between groups at week 1 (p = 0.044) and week 3 (p = 0.026). Flatulence was significantly lower for active group compared to placebo at week 2 (p = 0.047) and week 3 (p = 0.023). The number of bowel movements associated with urgency was significantly lower in the treatment group compared to the placebo group at week 3 (p = 0

A survey of nuclear-related agreements and possibilities for nuclear cooperation in South Asia: Cooperative Monitoring Center Occasional Paper/Draft

International Nuclear Information System (INIS)

Rajen, Gaurav

2000-01-01

Several existing nuclear-related agreements already require India and Pakistan, as members, to share information. The agreements are bilateral, regional, and international. Greater nuclear transparency between India and Pakistan could be promoted by first understanding the information flows required by existing agreements. This understanding is an essential step for developing projects that can incrementally advance the sensitivity of the information being shared. This paper provides a survey of existing nuclear-related agreements involving India and Pakistan, and suggests future confidence-building projects using the frameworks provided by these agreements. The Bilateral Agreement on the Prohibition of Attack against Nuclear Reactors and Nuclear Facilities is discussed as a basis for creating further agreements on restricting the use and deployment of nuclear weapons. The author suggests options for enhancing the value of the list of nuclear facilities exchanged annually as a part of this agreement. The International Atomic Energy Agency's regional cooperation agreement among countries in the Asia-Pacific region is an opportunity for greater subregional nuclear cooperation in South Asia. Linking the regional agreement with South Asian environmental cooperation and marine pollution protection efforts could provide a framework for projects involving Indian and Pakistani coastal nuclear facilities. Programs of the Food and Agriculture Organization of the United Nations that use nuclear techniques to increase food and crop production and optimize water management in arid areas also provide similar opportunities for nuclear cooperation. Other frameworks for nuclear cooperation originate from international conventions related to nuclear safety, transportation of nuclear wastes, worker protection against ionizing radiation, and the nondeployment of nuclear weapons in certain areas. The information shared by existing frameworks includes: laws and regulations (including

A survey of nuclear-related agreements and possibilities for nuclear cooperation in South Asia: Cooperative Monitoring Center Occasional Paper/15

Energy Technology Data Exchange (ETDEWEB)

RAJEN,GAURAV

2000-04-01

Several existing nuclear-related agreements already require India and Pakistan, as members, to share information. The agreements are bilateral, regional, and international. Greater nuclear transparency between India and Pakistan could be promoted by first understanding the information flows required by existing agreements. This understanding is an essential step for developing projects that can incrementally advance the sensitivity of the information being shared. This paper provides a survey of existing nuclear-related agreements involving India and Pakistan, and suggests future confidence-building projects using the frameworks provided by these agreements. The Bilateral Agreement on the Prohibition of Attack against Nuclear Reactors and Nuclear Facilities is discussed as a basis for creating further agreements on restricting the use and deployment of nuclear weapons. The author suggests options for enhancing the value of the list of nuclear facilities exchanged annually as a part of this agreement. The International Atomic Energy Agency's regional cooperation agreement among countries in the Asia-Pacific region is an opportunity for greater subregional nuclear cooperation in South Asia. Linking the regional agreement with South Asian environmental cooperation and marine pollution protection efforts could provide a framework for projects involving Indian and Pakistani coastal nuclear facilities. Programs of the Food and Agriculture Organization of the United Nations that use nuclear techniques to increase food and crop production and optimize water management in arid areas also provide similar opportunities for nuclear cooperation. Other frameworks for nuclear cooperation originate from international conventions related to nuclear safety, transportation of nuclear wastes, worker protection against ionizing radiation, and the nondeployment of nuclear weapons in certain areas. The information shared by existing frameworks includes: laws and regulations

Do I mean what I say and say what I mean? A cross cultural ap-proach to the use of emoticons & emojis in CMC messages

Directory of Open Access Journals (Sweden)

Lifen CHENG

2017-12-01

Full Text Available The use of emoticons and emojis among online messaging users has achieved a globalized level. This article aims at examining how certain emojis and emoticons are chosen by message senders to regular the intensity of emotions in their messages. Or, by means of using them, message senders wish to blur textual rigidity and show interaction empathy during the communication process. This study analyzes the use of these symbols and graphic elements in message exchange through CMC and SNS, where users from different culture background convey their feeling. For it, two empirical studies of a methodological design were carried out: One pilot study was intended for the research instrument validation. The second was a survey study. By testing online messaging habit, this study enabled the researchers to observe whether the senders inclined to linguistic text use only, or they preferred including an additional emoticon or emoji in their message to communicate their feelings. Results of this research show that, at a certain extent, massage senders’ different culture background could influence on their emotional expressivity level.

Creep Behavior of Hafnia and Ytterbium Silicate Environmental Barrier Coating Systems on SiC/SiC Ceramic Matrix Composites

Science.gov (United States)

Zhu, Dongming; Fox, Dennis S.; Ghosn, Louis J.; Harder, Bryan

2011-01-01

Environmental barrier coatings will play a crucial role in future advanced gas turbine engines because of their ability to significantly extend the temperature capability and stability of SiC/SiC ceramic matrix composite (CMC) engine components, thus improving the engine performance. In order to develop high performance, robust coating systems for engine components, appropriate test approaches simulating operating temperature gradient and stress environments for evaluating the critical coating properties must be established. In this paper, thermal gradient mechanical testing approaches for evaluating creep and fatigue behavior of environmental barrier coated SiC/SiC CMC systems will be described. The creep and fatigue behavior of Hafnia and ytterbium silicate environmental barrier coatings on SiC/SiC CMC systems will be reported in simulated environmental exposure conditions. The coating failure mechanisms will also be discussed under the heat flux and stress conditions.

Experts' Perspectives Toward a Population Health Approach for Children With Medical Complexity.

Science.gov (United States)

Barnert, Elizabeth S; Coller, Ryan J; Nelson, Bergen B; Thompson, Lindsey R; Chan, Vincent; Padilla, Cesar; Klitzner, Thomas S; Szilagyi, Moira; Chung, Paul J

2017-08-01

Because children with medical complexity (CMC) display very different health trajectories, needs, and resource utilization than other children, it is unclear how well traditional conceptions of population health apply to CMC. We sought to identify key health outcome domains for CMC as a step toward determining core health metrics for this distinct population of children. We conducted and analyzed interviews with 23 diverse national experts on CMC to better understand population health for CMC. Interviewees included child and family advocates, health and social service providers, and research, health systems, and policy leaders. We performed thematic content analyses to identify emergent themes regarding population health for CMC. Overall, interviewees conveyed that defining and measuring population health for CMC is an achievable, worthwhile goal. Qualitative themes from interviews included: 1) CMC share unifying characteristics that could serve as the basis for population health outcomes; 2) optimal health for CMC is child specific and dynamic; 3) health of CMC is intertwined with health of families; 4) social determinants of health are especially important for CMC; and 5) measuring population health for CMC faces serious conceptual and logistical challenges. Experts have taken initial steps in defining the population health of CMC. Population health for CMC involves a dynamic concept of health that is attuned to individual, health-related goals for each child. We propose a framework that can guide the identification and development of population health metrics for CMC. Copyright © 2017 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

Thyme and basil essential oils included in edible coatings as a natural preserving method of oilseed kernels.

Science.gov (United States)

Riveros, Cecilia G; Nepote, Valeria; Grosso, Nelson R

2016-01-15

Sunflower seeds are susceptible to developing rancidity and off-flavours through lipid oxidation. Edible coatings and essential oils have proven antioxidant properties in different food products. The purpose of this study was to evaluate the combined effect of using an edible coating and thyme and basil essential oils to preserve the chemical and sensory quality parameters of roasted sunflower seeds during storage. 50% DPPH inhibitory concentration (IC50) values of 0.278 and 0.0997 µg mL(-1) were observed for thyme and basil, respectively. On storage day 40, peroxide values were 80.68, 70.28, 68.43, 49.31 and 33.87 mEq O2 kg(-1) in roasted sunflower seeds (RS), roasted sunflower seeds coated with carboxymethyl cellulose (CMC) (RS-CMC), roasted sunflower seeds coated with CMC added with basil (RS-CMC-A), thyme (RS-CMC-T) and butylated hydroxytoluene (RS-CMC-BHT), respectively. RS-CMC-T and RS-CMC-BHT presented the lowest peroxide values, conjugated dienes and p-anisidine values during storage. RS-CMC-BHT, RS-CMC-T, and RS-CMC-A showed the lowest oxidized and cardboard flavour intensity ratings. On storage day 40, roasted sunflower flavour intensity ratings were higher in RS-CMC-T and RS-CMC-A. Thyme and basil essential oils added to the CMC coating improved the sensory stability of this product during storage, but only thyme essential oil increased their chemical stability. © 2015 Society of Chemical Industry.

Combined Thermomechanical and Environmental Durability of Environmental Barrier Coating Systems on SiC/SiC Ceramic Matrix Composites

Science.gov (United States)

Zhu, Dongming; Harder, Bryan; Bhatt, Ramakrishna

2016-01-01

Environmental barrier coatings (EBCs) and SiC/SiC ceramic matrix composites (CMCs) will play a crucial role in next generation turbine engines for hot-section component applications. The development of prime-reliant environmental barrier coatings is essential to the EBC-CMC system durability, ensuring the successful implementations of the high temperature and lightweight engine component technologies for engine applications.This paper will emphasize recent NASA environmental barrier coating and CMC developments for SiC/SiC turbine airfoil components, utilizing advanced coating compositions and processing methods. The emphasis has been particularly placed on thermomechanical and environment durability evaluations of EBC-CMC systems. We have also addressed the integration of the EBCs with advanced SiC/SiC CMCs, and studied the effects of combustion environments and Calcium-Magnesium-Alumino-Silicate (CMAS) deposits on the durability of the EBC-CMC systems under thermal gradient and mechanical loading conditions. Advanced environmental barrier coating systems, including multicomponent rare earth silicate EBCs and HfO2-Si based bond coats, will be discussed for the performance improvements to achieve better temperature capability and CMAS resistance for future engine operating conditions.

Technology-Use Mediation

DEFF Research Database (Denmark)

Bansler, Jørgen P.; Havn, Erling C.

2004-01-01

Implementation of new computer-mediated communication (CMC) systems in organizations is a complex socio-technical endeavour, involving the mutual adaptation of technology and organization over time. Drawing on the analytic concept of sensemaking, this paper provides a theoretical perspective...... that deepens our understanding of how organizations appropriate new electronic communication media. The paper analyzes how a group of mediators in a large, multinational company adapted a new web-based CMC technology (a virtual workspace) to the local organizational context (and vice versa) by modifying...... features of the technology, providing ongoing support for users, and promoting appropriate conventions of use. We found that these mediators exerted considerable influence on how the technology was established and used in the organization. The mediators were not neutral facilitators of a well...

In situ green synthesis of antimicrobial carboxymethyl chitosan-nanosilver hybrids with controlled silver release.

Science.gov (United States)

Huang, Siqi; Yu, Zhiming; Zhang, Yang; Qi, Chusheng; Zhang, Shifeng

2017-01-01

In order to fabricate antimicrobial carboxymethyl chitosan-nanosilver (CMC-Ag) hybrids with controlled silver release, this study demonstrated comparable formation via three synthetic protocols: 1) carboxymethyl chitosan (CMC) and glucose (adding glucose after AgNO 3 ), 2) CMC and glucose (adding glucose before AgNO 3 ), and 3) CMC only. Under principles of green chemistry, the synthesis was conducted in an aqueous medium exposed to microwave irradiation for 10 minutes with nontoxic chemicals. The structure and formation mechanisms of the three CMC-Ag hybrids were explored using X-ray diffraction, ultraviolet-visible spectroscopy, transmission electron microscopy, and Fourier-transform infrared analyses. Additionally, antimicrobial activity and in vitro silver release of the three synthesized hybrids were investigated in detail. The results revealed that a large number of stable, uniform, and small silver nanoparticles (AgNPs) were synthesized in situ on CMC chains via protocol 1. AgNPs were well dispersed with narrow size distribution in the range of 6-20 nm, with mean diameter only 12.22±2.57 nm. The addition of glucose resulted in greater AgNP synthesis. The order of addition of glucose and AgNO 3 significantly affected particle size and size distribution of AgNPs. Compared to CMC alone and commercially available AgNPs, the antimicrobial activities of three hybrids were significantly improved. Of the three hybrids, CMC-Ag1 synthesized via protocol 1 exhibited better antimicrobial activity than CMC-Ag2 and CMC-Ag3, and showed more effective inhibition of Staphylococcus aureus than Escherichia coli . Due to strong coordination and electrostatic interactions between CMC and silver and good steric protection provided by CMC, CMC-Ag1 displayed stable and continuous silver release and better performance in retaining silver for prolonged periods than CMC-Ag2 and CMC-Ag3.

In situ green synthesis of antimicrobial carboxymethyl chitosan–nanosilver hybrids with controlled silver release

Science.gov (United States)

Huang, Siqi; Yu, Zhiming; Zhang, Yang; Qi, Chusheng; Zhang, Shifeng

2017-01-01

In order to fabricate antimicrobial carboxymethyl chitosan–nanosilver (CMC-Ag) hybrids with controlled silver release, this study demonstrated comparable formation via three synthetic protocols: 1) carboxymethyl chitosan (CMC) and glucose (adding glucose after AgNO3), 2) CMC and glucose (adding glucose before AgNO3), and 3) CMC only. Under principles of green chemistry, the synthesis was conducted in an aqueous medium exposed to microwave irradiation for 10 minutes with nontoxic chemicals. The structure and formation mechanisms of the three CMC-Ag hybrids were explored using X-ray diffraction, ultraviolet-visible spectroscopy, transmission electron microscopy, and Fourier-transform infrared analyses. Additionally, antimicrobial activity and in vitro silver release of the three synthesized hybrids were investigated in detail. The results revealed that a large number of stable, uniform, and small silver nanoparticles (AgNPs) were synthesized in situ on CMC chains via protocol 1. AgNPs were well dispersed with narrow size distribution in the range of 6–20 nm, with mean diameter only 12.22±2.57 nm. The addition of glucose resulted in greater AgNP synthesis. The order of addition of glucose and AgNO3 significantly affected particle size and size distribution of AgNPs. Compared to CMC alone and commercially available AgNPs, the antimicrobial activities of three hybrids were significantly improved. Of the three hybrids, CMC-Ag1 synthesized via protocol 1 exhibited better antimicrobial activity than CMC-Ag2 and CMC-Ag3, and showed more effective inhibition of Staphylococcus aureus than Escherichia coli. Due to strong coordination and electrostatic interactions between CMC and silver and good steric protection provided by CMC, CMC-Ag1 displayed stable and continuous silver release and better performance in retaining silver for prolonged periods than CMC-Ag2 and CMC-Ag3. PMID:28458539

Evaluating Critical Thinking in Computer Mediated Communication Discussions

Directory of Open Access Journals (Sweden)

Faizah Mohamad

2008-06-01

Full Text Available This paper presents an investigation of whether computer mediated communication (CMC can develop critical thinking in language classrooms. The research was conducted at a university branch campus in Malaysia over a period of 12 weeks. It involved three groups of learners in which each group was exposed to different discussion modes. The first group was exposed to a CMC discussion mode, the second group was exposed to a mixed mode of CMC and face-to-face (F2F discussions and the third group had only the face-to-face mode of discussion. The critical thinking development in these three conditions was evaluated based on the content analysis method used by Newman, Johnson, Cochrane and Webb (1995. This research reports the findings which hopefully will give some insight to other teaching practitioners who are interested in incorporating IT in their classrooms

Routes into the Mainstream: Career Choices of Women and Minorities. Occasional Paper No. 124.

Science.gov (United States)

Berryman, Sue E.

Joint implications from five recent studies on occupational choice indicate that a more in-depth concentration on the occupational consistency or discontinuity of women and minorities will provide direction for future academic discipline and policy for this population. The discipline and policy process is potentially one of the most important…

When American Businesses Change: the Imperatives for Skill Formation. NCEE Occasional Paper No. 9.

Science.gov (United States)

Berryman, Sue E.

In the face of changing economic conditions and shifts in skill requirements caused by technology, American corporations must integrate learning as an integral part of their functioning. Businesses must implement learning-intensive production, speed up the process of learning how to improve training, and learn how to assess the results of…

"The Panama Canal Episode: An Encounter with a Question and Answers." Occasional Paper 3.

Science.gov (United States)

Seifman, Eli

This is an account of the experience of a college instructor and a group of prospective social studies teachers as they answer a simple question concerned with direction of travel through the Panama Canal and explore the reactions of students. The situation originates in a class discussion focusing on ways of asking and responding to classroom…

Electric power industry restructuring in Australia: Lessons from down-under. Occasional paper No. 20

Energy Technology Data Exchange (ETDEWEB)

Ray, D. [Univ. of Wisconsin, Madison, WI (United States)

1997-01-01

Australia`s electric power industry (EPI) is undergoing major restructuring. This restructuring includes commercialization of state-owned electric organization through privatization and through corporatization into separate governmental business units; structural unbundling of generation, transmission, retailing, and distribution; and creation of a National Electricity Market (NEM) organized as a centralized, market-based trading pool for buying and selling electricity. The principal rationales for change in the EPI were the related needs of enhancing international competitiveness, improving productivity, and lowering electric rates. Reducing public debt through privatization also played an important role. Reforms in the EPI are part of the overall economic reform package that is being implemented in Australia. Enhancing efficiency in the economy through competition is a key objective of the reforms. As the need for reform was being discussed in the early 1990s, Australia`s previous prime minister, Paul Keating, observed that {open_quotes}the engine which drives efficiency is free and open competition.{close_quotes} The optimism about the economic benefits of the full package of reforms across the different sectors of the economy, including the electricity industry, is reflected in estimated benefits of a 5.5 percent annual increase in real gross domestic product and the creation of 30,000 more jobs. The largest source of the benefits (estimated at 25 percent of total benefits) was projected to come from reform of the electricity and gas sectors.

Trouble in Paradise: Teacher Conflicts in Shared Decision Making. NCEL Occasional Paper No. 8.

Science.gov (United States)

Weiss, Carol H.; And Others

Drawing on interviews with 180 staff members from 45 public high schools in 15 states, this document examines the advantages and disadvantages of teacher participation in shared decision making. The settings of six high schools that had structured mechanisms for teacher participation in school decisions are described, and problems that emerged…

Leadership, Diversity and Succession Planning in Academia. Research & Occasional Papers Series: CSHE 8.10

Science.gov (United States)

Gonzalez, Cristina

2010-01-01

Although academia is becoming more like business in many respects--not all of them positive--it has not borrowed one of the best attributes of business culture: its tradition of developing leadership through succession planning. As a result, much talent is underutilized. This includes, most prominently, that of women and minorities, who tend not…

Governor's Conference on Drug Dependence and Abuse. An Occasional Paper of the Honors College.

Science.gov (United States)

Milliken, William G.; And Others

1970-01-01

Following Governor Milliken's address, Dr. Dana Farnsworth defines the problem in terms of who's involved, to what extent, and with which drugs. His presentation focuses primarily on the motives of affluent young people who experiment with or become dependent upon hallucinogens, marihuana and amphetamines. He deals extensively with the drastically…

Information Technology-Based Open Learning--A Study Report. Occasional Paper InTER/12/89.

Science.gov (United States)

Hodgson, V., Ed.; And Others

This document reports on a study which focused on improving the flexibility and responsiveness of vocational education and training provision in Great Britain by producing a plan for information technology-based open learning (ITOL) provision. In the first section, the ITOL model is described through three scenarios. Benefits to learners such as…

On Mao Tse-tung: A Bibliographic Guide. East Asia Series, Occasional Paper No. 2.

Science.gov (United States)

Shu, Austin C. W.

This bibliography is a selected reference source on the life, politics, philosophy, and works of Mao Tse-tung. It contains 800 documents in Chinese, Japanese, and Western languages that were selected from monographs and journal articles. Most of the entries pertain to Mao's role after 1949 when he emerged as the new leader in Mainland China. The…

Young Children Write: The Beginnings. Program in Language and Literacy Occasional Paper No. 5.

Science.gov (United States)

Milz, Vera E.

Focusing on writing as a language process, this booklet describes a framework for writing instruction that has as a major consideration the totality of language. The first section discusses writing as a language process, emphasizing that as children learn to write, they can also learn to listen, speak, and read. The second section focuses on the…

Cooperative Monitoring Center Occasional Paper/8: Cooperative Border Security for Jordan: Assessment and Options

Energy Technology Data Exchange (ETDEWEB)

Qojas, M.

1999-03-01

This document is an analysis of options for unilateral and cooperative action to improve the security of Jordan's borders. Sections describe the current political, economic, and social interactions along Jordan's borders. Next, the document discusses border security strategy for cooperation among neighboring countries and the adoption of confidence-building measures. A practical cooperative monitoring system would consist of hardware for early warning, command and control, communications, and transportation. Technical solutions can expand opportunities for the detection and identification of intruders. Sensors (such as seismic, break-wire, pressure-sensing, etc.) can warn border security forces of intrusion and contribute to the identification of the intrusion and help formulate the response. This document describes conceptual options for cooperation, offering three scenarios that relate to three hypothetical levels (low, medium, and high) of cooperation. Potential cooperative efforts under a low cooperation scenario could include information exchanges on military equipment and schedules to prevent misunderstandings and the establishment of protocols for handling emergency situations or unusual circumstances. Measures under a medium cooperation scenario could include establishing joint monitoring groups for better communications, with hot lines and scheduled meetings. The high cooperation scenario describes coordinated responses, joint border patrols, and sharing border intrusion information. Finally, the document lists recommendations for organizational, technical, and operational initiatives that could be applicable to the current situation.

A Spectre Haunting: New Dimensions of Youth Protest in Western Europe. Occasional Paper 8208.

Science.gov (United States)

Mushaben, Joyce Marie

European protest movements of the eighties are analyzed and compared to the dissident movements of the sixties and seventies. The focus is on the peace, anti-nuclear, and ecology movements, the drive for autonomous youth centers in Switzerland, racial disturbances in Britain, and unrest among the urban squatters in the German Federal Republic. Six…

"Evaluation as Illumination: A New Approach to the Study of Innovatory Programs". Occasional Paper.

Science.gov (United States)

Parlett, Malcolm; Hamilton, David

Conventional approaches to program evaluation have followed the experimental and psychometric traditions dominant in educational research. Their aim (unfulfilled) of achieving fully objective methods had led to studies that are artificial and restricted in scope. Illuminative evaluation is introduced as a total re-appraisal of the rationale and…

Preparation and characterization of green-nano-composite material based on polyaniline, multiwalled carbon nano tubes and carboxymethyl cellulose: For electrochemical sensor applications.

Science.gov (United States)

Gautam, Vineeta; Singh, Karan Pratap; Yadav, Vijay Laxmi

2018-06-01

In this paper, we are presenting the preparation and characterization of "polyaniline/multiwalled carbon nanotubes/carboxymethyl cellulose" based novel composite material. It's morphological, thermal, structural, and electrochemical properties were investigated by using different instrumental techniques. During the in-situ chemical polymerization of aniline in the aqueous suspension of CMC and MWCNTs, the particle size change in two different ways "top to bottom" (low molecular weight oligomers grows in size) and "bottom to top" (long fibers of CMC fragmented in the reaction mixture). The combination of these two processes facilitated the fabrication of an integrated green-nano-composite material. In addition, a little amount of conductive nanofillers (MWCNTs) boosts the electrical and electrocatalytic properties of the material. Electron-rich centers of benzenoid rings exhibited π-π stacking with sp 2 carbon of MWCNTs. CMC dominantly impact on the properties of PANI, negatively charged carboxylate group of CMC ionically bonded with protonated amine/imine. FTIR and Raman analysis confirmed that the material has dominated quinoid units and effective charge transfer. Hydroxyl and carboxyl groups and bonded water molecules of CMC results in a network of hydrogen bonds (which induced directional property). PANI/MWCNTs/CMC have nanobead-like structures (TEM analysis), large surface area, large pore volume, small pore diameter (BET and BJH studies) and good dispersion ability in the aqueous phase. Nanostructures of aligned PANI exhibited excellent electrochemical properties have attracted increasing attention. Modified carbon paste electrode was used for electrocatalytic detection of ascorbic acid (as a model analyte). The sensor exhibited a linear range 0.05 mM-5 mM, sensitivity 100.63 μA mM -1  cm -2 , and limit of detection 0.01 mM. PANI/MWCNTs/CMC is suitable nanocomposite material for apply electroactive/conducting ink and membrane (which could be

AGB-UVA Symposium on Research and Scholarship on Higher Education [Governance, Trusteeship and the Academic Presidency] (Charlottesville, VA, December 5-6, 1999). Occasional Paper.

Science.gov (United States)

Pusser, Brian

2000-01-01

This paper summarizes the proceedings of the 1999 Symposium on Research and Scholarship on Higher Education Governance, Trusteeship, and the Academic Presidency sponsored by the Association of Governing Boards of Universities and Colleges and the Curry School of Education at the University of Virginia. The symposium addressed the state of research…

Pre-form ceramic matrix composite cavity and method of forming and method of forming a ceramic matrix composite component

Science.gov (United States)

Monaghan, Philip Harold; Delvaux, John McConnell; Taxacher, Glenn Curtis

2015-06-09

A pre-form CMC cavity and method of forming pre-form CMC cavity for a ceramic matrix component includes providing a mandrel, applying a base ply to the mandrel, laying-up at least one CMC ply on the base ply, removing the mandrel, and densifying the base ply and the at least one CMC ply. The remaining densified base ply and at least one CMC ply form a ceramic matrix component having a desired geometry and a cavity formed therein. Also provided is a method of forming a CMC component.

Preparation and characterization of micro-cell membrane chromatographic column with N-hydroxysuccinimide group-modified silica-based porous layer open tubular capillary.

Science.gov (United States)

Xu, Liang; Xu, Bei; Zhao, Zhi-Yu; Yang, Hui-Ping; Tang, Cheng; Dong, Lin-Yi; Liu, Kun; Fu, Li; Wang, Xian-Hua

2017-09-22

Cell membrane chromatography (CMC) is an effective tool in screening active compounds from natural products and studying membrane protein interactions. Nevertheless, it always consumes a large amount of cells (e.g. 10 7 -10 8 ) for column preparation. To overcome this, micro-CMC (mCMC), that employs a silica capillary as membrane carrier, was developed. However, both CMC and mCMC suffer from short column life span (e.g. 3days), mainly due to the falling-off of cellular membranes (CMs). This has greatly limited further application of CMC and mCMC, especially when the cells are hard to obtain. To solve this, N-hydroxysuccinimide (NHS)-modified silica-based porous layer open tubular capillary was first prepared for mCMC. The NHS groups can easily react with amino groups on CMs to form a stable covalent bond under a mild condition. So, CMs immobilized on the NHS-modified capillary are less likely to fall off. To verify this, SKBR3/mCMC (Her2 positive) and BALL1/mCMC (CD20 positive) columns were prepared. Two monoclonal antibody drugs, trastuzumab (anti-Her2) and rituximab (anti-CD20), were selected as analytes to characterize the columns. As a result, NHS-modified column for mCMC can afford higher chromatographic retention than non-modified column. Besides, the column life span was significantly improved to more than 16days for SKBR3/mCMC and 14days for BALL1/mCMC, while the compared column showed a sharp decline in retention factor in first 3days. Copyright © 2017 Elsevier B.V. All rights reserved.

75 FR 61700 - Purified Carboxymethylcellulose From Finland, the Netherlands, and Sweden: Final Results of the...

Science.gov (United States)

2010-10-06

... also referred to as purified sodium CMC, polyanionic cellulose, or cellulose gum, which is a white to....gov/frn . The paper copy and electronic version of the Decision Memo are identical in content. Final...

[Time profile of serum THC levels in occasional and chronic marihuana smokers after acute drog use - implication for drivind motor vehicles].

Science.gov (United States)

Balíková, Marie; Hložek, Tomáš; Páleníček, Tomáš; Tylš, Filip; Viktorinová, Michaela; Melicher, Tomáš; Androvičová, Renáta; Tomíček, Pavel; Roman, Michal; Horáček, Jiří

2014-01-01

Cannabis consumption has individual influence to cognitive and psychomotor functions of drivers and it has been generally accepted that driving under influence is risky in the perspective of traffic safety. However, rules how to assess fitness to drive are not quite clear. The psychoactive compound delta-9-tetrahydrocannabinol (THC) impairs cognition, psychomotor behaviour and driving performance in a dose-related manner approximately. After a single drug dose, THC blood concentration peaks within minutes, before the end of smoking, with a subsequent rapid decrease to the analytical limit of detection. Peak euphoria is delayed compared to THC peak blood concentration and physiological and behavioural effects return to baseline within 3-5 hours. In chronic users, the lipophilic THC accumulates in fat tissues, where its slow redistribution into blood is the rate limiting process in its terminal elimination. In our experimental study we have attempted to contribute to this discussion with results obtained from human volunteers - cannabis consumers in Czech Republic. Aim of our study was to document the time profile of serum THC level in occasional and chronic cannabis users. The observational interval covered the time immediately after the drug consumption (an own cigarette/joint) till 24 hours after. Our preliminary results have shown that in occasional users, THC serum levels cannot be detected already 4 hours after usual cannabis dose, whereas in chronic users measurable THC concentrations in serum persist longer. Moreover, some chronic consumers were practically with permanent THC detection during our observation period and also the chronic users consumed higher THC doses significantly related to doses in occasional ones. Presented results of the experimental study with human volunteers confirm a great individual variability of the kinetic profile of THC in blood due to complicated redistribution. The practical forensic question is how long the psychotropic

Development and Property Evaluation of Selected HfO2-Silicon and Rare Earth-Silicon Based Bond Coats and Environmental Barrier Coating Systems for SiC/SiC Ceramic Matrix Composites

Science.gov (United States)

Zhu, Dongming

2016-01-01

Ceramic environmental barrier coatings (EBC) and SiC/SiC ceramic matrix composites (CMCs) will play a crucial role in future aircraft propulsion systems because of their ability to significantly increase engine operating temperatures, improve component durability, reduce engine weight and cooling requirements. Advanced EBC systems for SiC/SiC CMC turbine and combustor hot section components are currently being developed to meet future turbine engine emission and performance goals. One of the significant material development challenges for the high temperature CMC components is to develop prime-reliant, high strength and high temperature capable environmental barrier coating bond coat systems, since the current silicon bond coat cannot meet the advanced EBC-CMC temperature and stability requirements. In this paper, advanced NASA HfO2-Si and rare earth Si based EBC bond coat EBC systems for SiC/SiC CMC combustor and turbine airfoil applications are investigated. High temperature properties of the advanced EBC systems, including the strength, fracture toughness, creep and oxidation resistance have been studied and summarized. The advanced NASA EBC systems showed some promise to achieve 1500C temperature capability, helping enable next generation turbine engines with significantly improved engine component temperature capability and durability.

Determination of material properties for short fibre reinforced C/C-SiC

Directory of Open Access Journals (Sweden)

Hausherr J.-M.

2015-01-01

Full Text Available Determining the mechanical properties of short fibre reinforced CMC using standard sized coupons has always been a challenge due to a high statistical scattering of the measured values. Although the random orientation of short fibres results in a quasi-isotropic material behavior of 2D-structures with a sufficiently large volume, the small volume typical for test coupons usually results in a non-isotropic fibre orientation in the tested volume. This paper describes a method for manufacturing unidirectional oriented short fibre reinforced CMC materials and presents material properties of UD-C/C-SiC. After verifying the fibre orientation of the CMC using micro-computed tomography, coupons were extracted to determine the orthotropic material properties. These orthotropic material properties were then used to predict the properties of C/C-SiC with randomly distributed short fibres. To validate the method, micro-computed tomography is used to quantitatively determine the fibre orientation within coupons extracted from randomly distributed short fibre C/C-SiC. After mechanical three-point-bending tests, the measured stiffness and bending strength is compared with the predicted properties. Finally, the data are used to devise a method suited for reducing the inherent large spread of material properties associated with the measurement of CMC materials with randomly distributed short fibres.

Estimating error rates for firearm evidence identifications in forensic science

Science.gov (United States)

Song, John; Vorburger, Theodore V.; Chu, Wei; Yen, James; Soons, Johannes A.; Ott, Daniel B.; Zhang, Nien Fan

2018-01-01

Estimating error rates for firearm evidence identification is a fundamental challenge in forensic science. This paper describes the recently developed congruent matching cells (CMC) method for image comparisons, its application to firearm evidence identification, and its usage and initial tests for error rate estimation. The CMC method divides compared topography images into correlation cells. Four identification parameters are defined for quantifying both the topography similarity of the correlated cell pairs and the pattern congruency of the registered cell locations. A declared match requires a significant number of CMCs, i.e., cell pairs that meet all similarity and congruency requirements. Initial testing on breech face impressions of a set of 40 cartridge cases fired with consecutively manufactured pistol slides showed wide separation between the distributions of CMC numbers observed for known matching and known non-matching image pairs. Another test on 95 cartridge cases from a different set of slides manufactured by the same process also yielded widely separated distributions. The test results were used to develop two statistical models for the probability mass function of CMC correlation scores. The models were applied to develop a framework for estimating cumulative false positive and false negative error rates and individual error rates of declared matches and non-matches for this population of breech face impressions. The prospect for applying the models to large populations and realistic case work is also discussed. The CMC method can provide a statistical foundation for estimating error rates in firearm evidence identifications, thus emulating methods used for forensic identification of DNA evidence. PMID:29331680

Novel Polyvinyl Alcohol/Styrene Butadiene Rubber Latex/Carboxymethyl Cellulose Nanocomposites Reinforced with Modified Halloysite Nanotubes

Directory of Open Access Journals (Sweden)

Yanjun Tang

2013-01-01

Full Text Available Novel polyvinyl alcohol (PVA/styrene butadiene rubber (SBR latex/carboxymethyl cellulose (CMC/halloysite nanotubes (HNTs nanocomposites were successfully prepared through physical blending. The as-obtained PVA/SBR/CMC/HNTs nanocomposites were coated on the surface of old corrugated container (OCC-based paper in an effort to improve the mechanical properties of paper. To improve the dispersion of HNTs and enhance the compatibility between HNTs and polymer matrix, HNTs were modified with titanate coupling agent (TCA. FT-IR, together with TGA, confirmed that TCA was grafted onto the surface of HNTs successfully. XRD demonstrated that the crystal structures of HNTs remained almost unchanged. TEM showed that modified HNTs exhibited good dispersion and possessed nanotubular structures with an outer diameter of around 50 nm and an inner diameter of about 20 nm. SEM gave an indication that modified HNTs were dispersed more uniformly than unmodified HNTs within PVA/SBR/CMC matrix. Rheological measurement exhibited that surface modification process enhanced the compatibility between HNTs and polymer matrix, thus resulting in the decreased viscosity of nanocomposites. In comparison with unmodified HNTs, modified HNTs were found to contribute more to the enhancement in mechanical properties, which might be attributed to the better dispersion and compatibility of modified HNTs evidenced by TEM, SEM, and rheological measurement.

Ecological and environmental constraints

Digital Repository Service at National Institute of Oceanography (India)

Wafar, M.V.M.

stream_size 10 stream_content_type text/plain stream_name ICG_Occasional_Paper_Ser_2000_1_25.pdf.txt stream_source_info ICG_Occasional_Paper_Ser_2000_1_25.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset...

Coastal zones: Problems and opportunities

Digital Repository Service at National Institute of Oceanography (India)

Sawkar, K.

stream_size 10 stream_content_type text/plain stream_name ICG_Occasional_Paper_Ser_2000_1_15.pdf.txt stream_source_info ICG_Occasional_Paper_Ser_2000_1_15.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset...

A study of the characteristics and in vitro permeation properties of CMC/ chitosan microparticles as a skin delivery system for vitamin E Estudo das características e propriedades da permeação in vitro de micropartículas de CMC/quitosana como sitema de liberação cutânea para vitamina E

Directory of Open Access Journals (Sweden)

Juliana Bucchi Alencastre

2006-03-01

Full Text Available Carboxymethylcellulose (CMC/chitosan microparticles containing vitamin E were prepared by a complex coacervation method and their potential use as a topical delivery system was evaluated. Morphology, particle size distribution, encapsulation yield, physical and chemical stability, in vitro release and permeation through skin were studied. The microparticles appeared to be spherical, with a homogeneous surface and were not aggregated. Mean diameters ranged from 2.7 to 7.6 µm and the encapsulation yield was 81%. Chemical stability studies indicated a protection of encapsulated vitamin E, of 8.1% for O/W and of 10.83% for W/O emulsions, following storage at 45 °C for 60 days. Forty-eight% of vitamin E, determined by HPLC, were released within 24 hours. In vitro permeation and retention studies showed a higher penetration rate of vitamin E in the free and encapsulated forms, from the W/O emulsion. The carriers studied seem to be promising systems for topical administration.Micropartículas de carboximetilcelulose (CMC/quitosana contendo vitamina E foram preparadas pelo método de coacervação complexa e seu uso potencial como um sistema de liberação tópico foi avaliado. Estudos da morfologia, da distribuição do tamanho de partículas, da eficiência de encapsulação, da estabilidade física e química e da liberação e permeação cutânea in vitro foram realizados. As análises por Microscopia Eletrônica de Varredura mostraram que as partículas são esféricas, possuem uma superfície homogênea e ausência de agregados, com diâmetros na faixa de 2,7 a 7,6 µm. A eficiência de encapsulação da vitamina E foi 81%. Os estudos de estabilidade química mostraram proteção da vitamina E encapsulada, sendo que a diferença em relação à quantidade de ativo remanescente na emulsão O/A foi de 8,1% e na A/O, de 10,8%, após armazenamento a 45 °C por um período de 60 dias. O ensaio de liberação in vitro mostrou que 48% da vitamina E

Voluntary control of corticomuscular coherence through neurofeedback: a proof-of-principle study in healthy subjects.

Science.gov (United States)

von Carlowitz-Ghori, K; Bayraktaroglu, Z; Waterstraat, G; Curio, G; Nikulin, V V

2015-04-02

Corticomuscular coherence (CMC) relates to synchronization between activity in the motor cortex and the muscle activity. The strength of CMC can be affected by motor behavior. In a proof-of-principle study, we examined whether independent of motor output parameters, healthy subjects are able to voluntarily modulate CMC in a neurofeedback paradigm. Subjects received visual online feedback of their instantaneous CMC strength, which was calculated between an optimized spatial projection of multichannel electroencephalography (EEG) and electromyography (EMG) in an individually defined target frequency range. The neurofeedback training consisted of either increasing or decreasing CMC strength using a self-chosen mental strategy while performing a simple motor task. Evaluation of instantaneous coherence showed that CMC strength was significantly larger when subjects had to increase than when to decrease CMC; this difference between the two task conditions did not depend on motor performance. The exclusion of confounding factors such as motor performance, attention and task complexity in study design provides evidence that subjects were able to voluntarily modify CMC independent of motor output parameters. Additional analysis further strengthened the assumption that the subjects' response was specifically shaped by the neurofeedback. In perspective, we suggest that CMC-based neurofeedback could provide a therapeutic approach in clinical conditions, such as motor stroke, where CMC is altered. Copyright © 2015 IBRO. Published by Elsevier Ltd. All rights reserved.

The Influence of Using Electronic Communication System on Employee's Mental Health : Focusing on the interactive operation type

OpenAIRE

石津, 和子

2008-01-01

Today more and more people use computers in occupational settings. One of the purposes of introducing Computer-Mediated Communication (CMC) into the office is to promote the efficiency and acceleration of work. But it is pointed out that office worker using CMC has some problems on their mental health. Considering the original characteristic of CMC, to research about the effect of using CMC in the office is thought to be quite important. This research focused on the effect of CMC against ment...

Experimental investigation of different refining stages influences on optical and ultrasonic signals in paper pulp suspensions

International Nuclear Information System (INIS)

Jan, Niemi

2010-01-01

An important parameter to control in papermaking is the fiber mass fraction in the pulp suspension. Poor control to an unstable process that compromises the production, quality and the energy efficiency in the pulp mill. Using optical or ultrasound measurement techniques can obtain estimation of the mass fraction. Refining is an important operation in preparing the fibers for the paper machine. Refining influence the properties of the fiber by crushing the fiber, roughens the fiber surface and occasionally cut fibers and removes parts of the outer fiber wall leading to an increasing amount of short fibers (fines). A freeness tester was used for verify the changes in fiber properties at four different refining levels. The result shows that for unbleached softwood pulp the used measurement techniques either were not observable or minor. The results indicate that refining can potentially influence accurate consistency estimation for unbleached softwood pulp but for bleached hardwood pulp the influence is believed to be minor using the investigating measurement techniques

The Future Nuclear Arms Control Agenda and Its Potential Implications for the Air Force

Science.gov (United States)

2015-08-01

US AIR FORCE INSTITUTE FOR NATIONAL SECURITY STUDIES USAF ACADEMY, COLORADO INSS OCCASIONAL PAPER AUGUST 2015 70 Dr. Lewis A. Dunn The Future...Implications for the Air Force Dr. Lewis A. Dunn INSS Occasional Paper 70 August 2015 USAF Institute for National Security Studies USAF

Opportunities in the EEZ

Digital Repository Service at National Institute of Oceanography (India)

Rao, P.S

stream_size 8 stream_content_type text/plain stream_name ICG_Occasional_Paper_Ser_2000_1_65.pdf.txt stream_source_info ICG_Occasional_Paper_Ser_2000_1_65.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset...=ISO-8859-1 ...

Coastal zones in Goa

Digital Repository Service at National Institute of Oceanography (India)

Desa, E.

stream_size 4 stream_content_type text/plain stream_name ICG_Occasional_Paper_Ser_2000_1_1.pdf.txt stream_source_info ICG_Occasional_Paper_Ser_2000_1_1.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

Guidance system operations plan for manned cm earth orbital and lunar missions using program Colossus 3. Section 2: Data links

Science.gov (United States)

Hamilton, M. H.

1971-01-01

The data links for use with the guidance system operations plan for manned command module earth orbital and lunar missions using program Colossus 3 are presented. The subjects discussed are: (1) digital uplink to CMC, (2) command module contiguous block update, (3) CMC retrofire external data update, (4) CMC digital downlink, and (5) CMC entry update.

Evaluation of Ceramic Matrix Composite Technology for Aircraft Turbine Engine Applications

Science.gov (United States)

Halbig, Michael C.; Jaskowiak, Martha H.; Kiser, James D.; Zhu, Dongming

2013-01-01

The goals of the NASA Environmentally Responsible Aviation (ERA) Project are to reduce the NO(x) emissions, fuel burn, and noise from turbine engines. In order to help meet these goals, commercially-produced ceramic matrix composite (CMC) components and environmental barrier coatings (EBCs) are being evaluated as parts and panels. The components include a CMC combustor liner, a CMC high pressure turbine vane, and a CMC exhaust nozzle as well as advanced EBCs that are tailored to the operating conditions of the CMC combustor and vane. The CMC combustor (w/EBC) could provide 2700 F temperature capability with less component cooling requirements to allow for more efficient combustion and reductions in NOx emissions. The CMC vane (w/EBC) will also have temperature capability up to 2700 F and allow for reduced fuel burn. The CMC mixer nozzle will offer reduced weight and improved mixing efficiency to provide reduced fuel burn. The main objectives are to evaluate the manufacturability of the complex-shaped components and to evaluate their performance under simulated engine operating conditions. Progress in CMC component fabrication, evaluation, and testing is presented in which the goal is to advance from the proof of concept validation (TRL 3) to a system/subsystem or prototype demonstration in a relevant environment (TRL 6).

A Trial Intercomparison of Humidity Generators at Extremes of Range Using Relative Humidity Transmitters

Science.gov (United States)

Stevens, M.; Benyon, R.; Bell, S. A.; Vicente, T.

2008-10-01

In order to effectively implement the Mutual Recognition Arrangement (MRA) of the International Committee for Weights and Measures (CIPM), national metrology institutes (NMIs) are required to support their claims of calibration and measurement capability (CMC) with a quality system compliant with ISO/IEC 17025, and with suitable evidence of participation in key or supplementary comparisons. The CMC review process, both at regional and inter-regional levels, uses criteria that combine the provisions mentioned above, together with additional evidence demonstrating scientific and technical competence of the institutes. For dew-point temperatures, there are key comparisons in progress under the Consultative Committee for Thermometry (CCT) and under the European regional metrology organisation (EUROMET), together with information available on past regional supplementary comparisons. However, for relative humidity there are, to date, no such comparisons available to support CMC entries. This paper presents and discusses the results of a preliminary investigation of the use of relative humidity and temperature transmitters in order to determine their suitability for the intercomparison of standard humidity generators in support of CMC claims for the calibration of relative humidity instruments. The results of a recent bilateral comparison between 2 NMIs at the extremes of the range up to 98%rh at 70 °C, and down to 1%rh at -40 °C are reported. Specific precautions and recommendations on the use of the devices as transfer standards are presented.

European Responses to Global Competitiveness in Higher Education. Research & Occasional Paper Series: CSHE.7.09

Science.gov (United States)

van der Wende, Marijk

2009-01-01

The growing global competition in which knowledge is a prime factor for economic growth is increasingly shaping policies and setting the agenda for the future of European higher education. With its aim to become the world's leading knowledge economy, the European Union is concerned about its performance in the knowledge sector, in particular in…

Nuclear Policy and World Order: Why Denuclearization. World Order Models Project. Occasional Paper Number Two.

Science.gov (United States)

Falk, Richard A.

The monograph examines the relationship of nuclear power to world order. The major purpose of the document is to stimulate research, education, dialogue, and political action for a just and peaceful world order. The document is presented in five chapters. Chapter I stresses the need for a system of global security to counteract dangers brought…

Does Support for VET Reduce Employee Churn? A Case Study in Local Government. Occasional Paper

Science.gov (United States)

Curry, Kath

2010-01-01

To what extent do local governments use vocational education and training as a staff retention strategy? Human resources personnel from a selection of councils around Australia believed that a lack of career development or training opportunities might cause an employee to leave their organisation. They had some reservations about the quality and…

Nursing Research and Practice with Refugees. Southeast Asian Refugee Studies. Bibliography. Occasional Papers, Number 10.

Science.gov (United States)

Muecke, Marjorie A.

This 99-item bibliography gathers the widely dispersed nursing literature on refugees, including unpublished master's degree theses and conference proceedings. Nurse researchers, more than researchers in other health care fields, have undertaken exploratory studies to document and interpret the health beliefs and health care practices of various…

Apprenticeship in Latin America: The INACAP Program in Chile. A Case Study. Occasional Paper #6.

Science.gov (United States)

Corvalan-Vasquez, Oscar E.

The development of apprenticeship programs in several Latin American countries was investigated with a focus on the results of an industrial apprenticeship program in Santiago, Chile. The program studied was the Instituto Nacional de Capacitacion Profesional (INACAP), the national vocational training institute of Chile. The purpose of the study…

Connecting Minds: Emergence of a Future Bent, Writing/Thinking Intensive Psychology Course. Occasional Paper #10

Science.gov (United States)

Fluellen, J. E., Jr.

2011-01-01

How might students engage mindful learning? How might the professor engage mindful teaching? Both questions derived from fieldnotes a participant observer had created for the Future of Learning 2010 Summer Institute (Harvard Graduate School of Education) and the Tests and Measurements course, fall 2010 at Edward Waters College (EWC). Additionally,…

Marketing Continuing Education: A Study of Price Strategies. Occasional Papers in Continuing Education, No. 11.

Science.gov (United States)

Lamoureux, Marvin E.

The objective of the study conducted at the Centre for Continuing Education (CCE) at the University of British Columbia was to determine that threshold pricing not only existed for continuing education courses, but also was applicable to an administrative decision-making structure. The first part of the three-part investigation analyzed consumer…

Islamic Finance and Economic Development Lessons from the past prospects for the future (Occasional Paper)

OpenAIRE

Ali, Salman Syed

2014-01-01

The Study starts by asking some fundamental qustions as to what role Islamic finance can play in socio-economic development, how similar or different it is from the conventional finance, and how its effectiveness can further be enhanced. The study analyzes the channels of impact of Islamic finance on real economic activities and, using Islamic finance in various sub-sectors of the economy. The study also covers aspects of resource mobilization and sound development of Islamic financial sector...

Design of amphoteric chitosan flocculants for phosphate and turbidity removal in wastewater.

Science.gov (United States)

Agbovi, Henry K; Wilson, Lee D

2018-06-01

An amphoteric flocculant (CMC-CTA) was synthesized by grafting 3-chloro-2-hydroxypropyl trimethylammonium chloride onto carboxymethyl chitosan (CMC). The turbidity and orthophosphate (P i ) removal properties of chitosan (CHI), CMC, and CMC-CTA were compared in the presence (and absence) of FeCl 3 coagulant. At a fixed FeCl 3 dosage, the effects of flocculant dosage, pH and settling time were evaluated. Turbidity removal (%) and optimal dosage (FeCl 3 ; mg/L) was determined: CMC-CTA (95.8%;5), CHI (88.8%;7.0) and CMC (68.8%;9.0). The corresponding P i removal (%) and dosage (mg/L) are listed: (93.4%;10), (90.6%;10), and (67.4%;5). Optimal turbidity and P i removal occurred at pH 4, where CMC-CTA had greater efficiency over CMC and CHI. The turbidity removal kinetics was described by the pseudo-second-order model, while P i removal followed the pseudo-first-order model. The removal process involves cooperative Coulombic interactions between the biopolymer/Fe(III)/P i and/or kaolinite colloids, along with polymer bridging effects. Copyright © 2018 Elsevier Ltd. All rights reserved.

The critical micelle concentration of lecithin in bulk oils and medium chain triacylglycerol is influenced by moisture content and total polar materials.

Science.gov (United States)

Kim, JiSu; Kim, Mi-Ja; Lee, JaeHwan

2018-09-30

Effects of different moisture contents and oxidised compounds on the critical micelle concentration (CMC) of lecithin were determined in bulk oils and in medium-chain triacylglycerols (MCT). CMC of lecithin in MCT was significantly higher than that in other vegetable oils including olive, soybean, corn, and rapeseed oils (p < 0.05). Presence of moisture significantly affected the CMC of lecithin in MCT (p < 0.05). CMC of lecithin was high when the moisture content was below 900 ppm, whereas at a moisture content of 1000 ppm, CMC of lecithin decreased significantly (p < 0.05), and then started to increase. Addition of total polar materials (TPM), which are oxidation products, at 3 and 5% concentrations, decreased CMC of lecithin significantly (p < 0.05) in MCT, compared to when 0, 1, and 1.5% of TPM was added to MCT. As the degree of oxidation increased in corn oil, CMC of lecithin gradually decreased. Additionally, under different moisture contents, corn oils showed a similar pattern of CMC of lecithin in MCT, whereas oxidised corn oil had a little lower CMC of lecithin than unoxidised corn oil. The results clearly showed that the concentration of lecithin for the formation of micelles is greatly influenced by the presence of oxidation products and the moisture content in bulk oils. Copyright © 2018 Elsevier Ltd. All rights reserved.

Characterization of low cost orally disintegrating film (ODF

Directory of Open Access Journals (Sweden)

Riana Jordao Barrozo Heinemann

Full Text Available Abstract Orally disintegrating films (ODF produced with a hydrophilic polymers are a thin and flexible material, wich disintegrate in contact with saliva and can vehicule bioactive materials. The aim of this study was to develop and characterize ODF formulation with potential to act as a carrier for different bioactives compounds prepared with low cost polymers. Gelatin (G, starch (S, carboxymethyl cellulose (CMC and their blends (G:S, CMC:S, CMC:G, and CMC:S:G were prepared by casting technique with sorbitol as a plasticizer. The formulations were characterized in terms of visual aspects, FTIR, SEM, mechanical characteristics, hygroscopicity, dissolution (in vitro and in vivo and swelling index. FTIR analysis revealed that no interaction between polymers in ODF was observed. By SEM, it was possible to observe differences on surfaces by different polymers. ODF made with CMC and CMC:G presented higher water absorption (P<0.05 and higher swelling index probably due to the higher water affinity by CMC. Formulations with G, CMC:G and CMC:S:G presented the highest values of tensile strength (P<0.05. ODF prepared with S alone presented the highest disintegration time, the others formulations showed in vitro dissolution ranging from 5.22 to 8.50 min, while in vivo dissolution time ranged from 2.15 to 3.38 min. By the formulations made with G and blend of G:S and CMC:S:G it is possible to develop a ODF of low cost with desired characteristics being an alternative vehicle to deliver functional compounds for continuous use.

Environmental Stability and Oxidation Behavior of HfO2-Si and YbGd(O) Based Environmental Barrier Coating Systems for SiCSiC Ceramic Matrix Composites

Science.gov (United States)

Zhu, Dongming; Farmer, Serene; McCue, Terry R.; Harder, Bryan; Hurst, Janet B.

2017-01-01

Ceramic environmental barrier coatings (EBC) and SiCSiC ceramic matrix composites (CMCs) will play a crucial role in future aircraft propulsion systems because of their ability to significantly increase engine operating temperatures, improve component durability, reduce engine weight and cooling requirements. Advanced EBC systems for SiCSiC CMC turbine and combustor hot section components are currently being developed to meet future turbine engine emission and performance goals. One of the significant material development challenges for the high temperature CMC components is to develop prime-reliant, environmental durable environmental barrier coating systems. In this paper, the durability and performance of advanced Electron Beam-Physical Vapor Deposition (EB-PVD) NASA HfO2-Si and YbGdSi(O) EBC bond coat top coat systems for SiCSiC CMC have been summarized. The high temperature thermomechanical creep, fatigue and oxidation resistance have been investigated in the laboratory simulated high-heat-flux environmental test conditions. The advanced NASA EBC systems showed promise to achieve 1500C temperature capability, helping enable next generation turbine engines with significantly improved engine component temperature capability and durability.

Three years of lightning impulse charge moment change measurements in the United States

Science.gov (United States)

Cummer, Steven A.; Lyons, Walter A.; Stanley, Mark A.

2013-06-01

We report and analyze 3 years of lightning impulse charge moment change (iCMC) measurements obtained from an automated, real time lightning charge moment change network (CMCN). The CMCN combines U.S. National Lightning Detection Network (NLDN) lightning event geolocations with extremely low frequency (≲1 kHz) data from two stations to provide iCMC measurements across the entire United States. Almost 14 million lightning events were measured in the 3 year period. We present the statistical distributions of iCMC versus polarity and NLDN-measured peak current, including corrections for the detection efficiency of the CMCN versus peak current. We find a broad distribution of iCMC for a given peak current, implying that these parameters are at best only weakly correlated. Curiously, the mean iCMC does not monotonically increase with peak current, and in fact, drops for positive CG strokes above +150 kA. For all positive strokes, there is a boundary near 20 C km that separates seemingly distinct populations of high and low iCMC strokes. We also explore the geographic distribution of high iCMC lightning strokes. High iCMC positive strokes occur predominantly in the northern midwest portion of the U.S., with a secondary peak over the gulf stream region just off the U.S. east coast. High iCMC negative strokes are also clustered in the midwest, although somewhat south of most of the high iCMC positive strokes. This is a region far from the locations of maximum occurrence of high peak current negative strokes. Based on assumed iCMC thresholds for sprite production, we estimate that approximately 35,000 positive polarity and 350 negative polarity sprites occur per year over the U.S. land and near-coastal areas. Among other applications, this network is useful for the nowcasting of sprite-producing storms and storm regions.

Atrapados en la red del am@r. Un análisis del lenguaje y las emociones en la CMO Caught in the web of l@ve. An analysis of language and emotions in CMC

Directory of Open Access Journals (Sweden)

Sotomayor Gilda

2008-01-01

Full Text Available El artículo trata de ver al Homo amans en el contexto actual de las Nuevas Tecnologías, dedicando especial atención a las relaciones sentimentales que se establecen en la CMO (Comunicación Mediada por Ordenador. Lo que se busca es entender el fenómeno del intercambio y comunicación emocional en un medio aparentemente tan frío como es Internet; para ello se aborda la Red, no desde una perspectiva tecnológica sino más bien antropológica y psicológica relacionada al tema emocional, eje central en torno al cual gira la vida del hombre. Se empieza haciendo un análisis del mundo de los sentimientos y las emociones para luego abordar el del lenguaje, elementos con los cuales se construye la comunicación humana. Posteriormente se ve, de forma específica, el lenguaje escrito en la CMO. Finalmente se da luces sobre la implicación de este tema en el campo educativo, haciendo hincapié en la formación sentimental a través de la formación de la competencia relacional o interactiva, en la que se encuentra profundamente implicado el sistema emocional del ser humano. The article tries to see the Homo amans in the current context of the New Technologies, with special attention to love relationships that are established in the CMC (Computer- Mediated Communication. What we are looking for is to understand the phenomenon of the emotional exchange and communication in an environment as seemingly cold as Internet. The Net is used for these purposes, but not from a technological perspective but anthropological and psychological, related to the emotional subject, central axis around which men life is rotated. It begins with an analysis of the feelings and the emotions and then it tackles the language, elements with which the human communication is built. Subsequently, we deal specifically with the written language in the CMC. Finally we will focus on the implication of this subject in the education sector, emphasizing the creation of feelings through

Untitled

African Journals Online (AJOL)

2004-03-29

Mar 29, 2004 ... cal, textile, paper, food and pharmaceutical industries hours at 30°C. The ... application of the enzyme produced (Udotong, 1997). M SO,.7H,0, 0.3; CaCI,, 0.5 .... great economic value to developing nations like Nigeria. -+-CMC.

On-line professional staff development: An evaluation study

NARCIS (Netherlands)

de Vries, Linda; Naidu, Som; Jegede, Olugbemiro; Collis, Betty

1995-01-01

This paper reports the design, implementation, and evaluation of a teleseminar on instructional design (ID) and computer-mediated communication (CMC) for the purposes of staff development at The University of Southern Queensland, Toowoomba, Australia. Participation was open to any staff with an

The ALADIN System and its canonical model configurations AROME CY41T1 and ALARO CY40T1

Science.gov (United States)

Termonia, Piet; Fischer, Claude; Bazile, Eric; Bouyssel, François; Brožková, Radmila; Bénard, Pierre; Bochenek, Bogdan; Degrauwe, Daan; Derková, Mariá; El Khatib, Ryad; Hamdi, Rafiq; Mašek, Ján; Pottier, Patricia; Pristov, Neva; Seity, Yann; Smolíková, Petra; Španiel, Oldřich; Tudor, Martina; Wang, Yong; Wittmann, Christoph; Joly, Alain

2018-01-01

The ALADIN System is a numerical weather prediction (NWP) system developed by the international ALADIN consortium for operational weather forecasting and research purposes. It is based on a code that is shared with the global model IFS of the ECMWF and the ARPEGE model of Météo-France. Today, this system can be used to provide a multitude of high-resolution limited-area model (LAM) configurations. A few configurations are thoroughly validated and prepared to be used for the operational weather forecasting in the 16 partner institutes of this consortium. These configurations are called the ALADIN canonical model configurations (CMCs). There are currently three CMCs: the ALADIN baseline CMC, the AROME CMC and the ALARO CMC. Other configurations are possible for research, such as process studies and climate simulations. The purpose of this paper is (i) to define the ALADIN System in relation to the global counterparts IFS and ARPEGE, (ii) to explain the notion of the CMCs, (iii) to document their most recent versions, and (iv) to illustrate the process of the validation and the porting of these configurations to the operational forecast suites of the partner institutes of the ALADIN consortium. This paper is restricted to the forecast model only; data assimilation techniques and postprocessing techniques are part of the ALADIN System but they are not discussed here.

Computer-Mediated Communication and Majority Influence: Assessing the Impact in an Individualistic and a Collectivistic Culture

OpenAIRE

Bernard C. Y. Tan; Kwok-Kee Wei; Richard T. Watson; Danial L. Clapper; Ephraim R. McLean

1998-01-01

Strong majority influence can potentially harm organizational decisions by causing decision makers to engage in groupthink. This study examines whether and how computer-mediated communication (CMC) can reduce majority influence and thereby enhance the quality of decisions in some situations. To measure the impact of CMC on majority influence, three settings (unsupported, face-to-face CMC, and dispersed CMC) were compared. Matching laboratory experiments were carried out in an individualistic ...

Fabrication of Novel Hydrogel with Berberine-Enriched Carboxymethylcellulose and Hyaluronic Acid as an Anti-Inflammatory Barrier Membrane

Directory of Open Access Journals (Sweden)

Yu-Chih Huang

2016-01-01

Full Text Available An antiadhesion barrier membrane is an important biomaterial for protecting tissue from postsurgical complications. However, there is room to improve these membranes. Recently, carboxymethylcellulose (CMC incorporated with hyaluronic acid (HA as an antiadhesion barrier membrane and drug delivery system has been reported to provide excellent tissue regeneration and biocompatibility. The aim of this study was to fabricate a novel hydrogel membrane composed of berberine-enriched CMC prepared from bark of the P. amurense tree and HA (PE-CMC/HA. In vitro anti-inflammatory properties were evaluated to determine possible clinical applications. The PE-CMC/HA membranes were fabricated by mixing PE-CMC and HA as a base with the addition of polyvinyl alcohol to form a film. Tensile strength and ultramorphology of the membrane were evaluated using a universal testing machine and scanning electron microscope, respectively. Berberine content of the membrane was confirmed using a UV-Vis spectrophotometer at a wavelength of 260 nm. Anti-inflammatory property of the membrane was measured using a Griess reaction assay. Our results showed that fabricated PE-CMC/HA releases berberine at a concentration of 660 μg/ml while optimal plasticity was obtained at a 30 : 70 PE-CMC/HA ratio. The berberine-enriched PE-CMC/HA had an inhibited 60% of inflammation stimulated by LPS. These results suggest that the PE-CMC/HA membrane fabricated in this study is a useful anti-inflammatory berberine release system.

S-carboxymethylcysteine inhibits adherence of Streptococcus pneumoniae to human alveolar epithelial cells.

Science.gov (United States)

Sumitomo, Tomoko; Nakata, Masanobu; Yamaguchi, Masaya; Terao, Yutaka; Kawabata, Shigetada

2012-01-01

Streptococcus pneumoniae is a major pathogen of respiratory infections that utilizes platelet-activating factor receptor (PAFR) for firm adherence to host cells. The mucolytic agent S-carboxymethylcysteine (S-CMC) has been shown to exert inhibitory effects against infection by several respiratory pathogens including S. pneumoniae in vitro and in vivo. Moreover, clinical studies have implicated the benefits of S-CMC in preventing exacerbation of chronic obstructive pulmonary disease, which is considered to be related to respiratory infections. In this study, to assess whether the potency of S-CMC is attributable to inhibition of pneumococcal adherence to host cells, an alveolar epithelial cell line stimulated with interleukin-1α was used as a model of inflamed epithelial cells. Despite upregulation of PAFR by inflammatory activation, treatment with S-CMC efficiently inhibited pneumococcal adherence to host epithelial cells. In order to gain insight into the inhibitory mechanism, the effects of S-CMC on PAFR expression were also investigated. Following treatment with S-CMC, PAFR expression was reduced at both mRNA and post-transcriptional levels. Interestingly, S-CMC was also effective in inhibiting pneumococcal adherence to cells transfected with PAFR small interfering RNAs. These results indicate S-CMC as a probable inhibitor targeting numerous epithelial receptors that interact with S. pneumoniae.

Staying Connected: Computer-Mediated and Face-to-Face Communication in College Students' Dating Relationships.

Science.gov (United States)

Boyle, Andrea M; O'Sullivan, Lucia F

2016-05-01

Little is known about the features, depth, and quality of communication in heterosexual dating relationships that include computer-mediated communication (CMC). This study examined these features as well as CMC's potential to facilitate self-disclosure and information-seeking. It also evaluated whether partner CMC interactions play a role in partner intimacy and communication quality. Young adults (N = 359; 18-24) attending postsecondary education institutions completed an online survey about their CMC use. To be included in the study, all participants were in established dating relationships at the time of the study and reported daily communication with their partner. CMC was linked to partners' disclosure of nonintimate information. This personal self-disclosure was linked positively to relationship intimacy and communication quality, beyond contributions from face-to-face interactions. Breadth (not depth) of self-disclosure and positively valenced interactions, in particular, proved key to understanding greater levels of intimacy in dating relationships and better communication quality as a function of CMC. CMC provides opportunities for partners to stay connected and to improve the overall quality of their intimacy and communication.

Immobilization of non-point phosphorus using stabilized magnetite nanoparticles with enhanced transportability and reactivity in soils

International Nuclear Information System (INIS)

Pan Gang; Li Lei; Zhao Dongye; Chen Hao

2010-01-01

Laboratory batch and column experiments were conducted to investigate the immobilization of phosphorus (P) in soils using synthetic magnetite nanoparticles stabilized with sodium carboxymethyl cellulose (CMC-NP). Although CMC-stabilized magnetite particles were at the nanoscale, phosphorus removal by the nanoparticles was less than that of microparticles (MP) without the stabilizer due to the reduced P reactivity caused by the coating. The P reactivity of CMC-NP was effectively recovered when cellulase was added to degrade the coating. For subsurface non-point P pollution control for a water pond, it is possible to inject CMC-NP to form an enclosed protection wall in the surrounding soils. Non-stabilized 'nanomagnetite' could not pass through the soil column under gravity because it quickly agglomerated into microparticles. The immobilized P was 30% in the control soil column, 33% when treated by non-stabilized MP, 45% when treated by CMC-NP, and 73% when treated by both CMC-NP and cellulase. - CMC-stabilized magnetite nanoparticles can effectively penetrate soil columns and immobilize phosphate in situ.

Design, characterization and in vitro evaluation of a novel thiolated polymer: preactivated carboxymethyl cellulose.

Science.gov (United States)

Laffleur, Flavia; Bacher, Lukas; Netsomboon, Kesinee

2016-01-01

To design a novel preactived carboxymethyl cellulose derivative. First, carboxymethyl cellulose (CMC) was chemically modified by amide bond formation between primary amino group of cysteine (CYS) and carboxylic moiety of CMC mediated by carbodiimide. Second, obtained CMCCYS was preactivated with 2,2'-dithiodinicotinic acid. Designed CMC-S-S-MNA was characterized by FT-IR. Furthermore, cytotoxicity was conducted on Caco-2 cell line. Swelling behavior, erosion and release of novel CMC-S-S-MNA were performed compared with thiolated and unmodified cellulose, respectively. CMC-S-S-MNA showed no harmful effect on cells. CMC-S-S-MNA exhibited 2.13-fold higher stability in comparison to unmodified cellulose. Furthermore, preactivated carboxymethyl cellulose-cysteine revealed 1.9-fold controlled released compared with respective unmodified carboxymethyl cellulose. Novel preactivated carboxymethyl cellulose represents a versatile excipient for drug delivery.

Interaction of Green Polymer Blend of Modified Sodium Alginate and Carboxylmethyl Cellulose Encapsulation of Turmeric Extract

Directory of Open Access Journals (Sweden)

Sa-Ad Riyajan

2013-01-01

Full Text Available Turmeric extract (tmr loaded nanoparticles were prepared by crosslinking modified carboxylmethyl cellulose (CMC and modified sodium alginate (SA with calcium ions, in a high pressure homogenizer. The FTIR spectra of CMC and SA were affected by blending due to hydrogen bonding. The negative zeta potential increased in magnitude with CMC content. The smallest nanoparticles were produced with a 10 : 5 SA/CMC blend. Also the release rates of the extract loading were measured, with model fits indicating that the loading level affected the release rate through nanoparticle structure. The 10 : 5 SA/CMC blend loading with tmr and pure tmr showed a good % growth inhibition of colon cancer cells which indicate that tmr in the presence of curcumin in tmr retains its anticancer activity even after being loaded into SA/CMC blend matrix.

Studies on conductance of uranyl soaps

International Nuclear Information System (INIS)

Mehrotra, K.N.; Sharma, M.; Gahlaut, A.S.

1987-01-01

Specific conductance of uranyl soaps in dimethylformamide indicates two critical micelle concentrations CMC(I) and CMC(II). The value of CMC(II) decreases with the increase in chain length of the soap, whereas CMC(I) does not vary at all. The results show that the soaps behave as simple electrolyte. The major conductance at infinite dilution (μsub(o)) and dissociation constant (K) of these soaps have been evaluated. (author). 12 refs

Critical micelle concentration values for different surfactants measured with solid-phase microextraction fibers

NARCIS (Netherlands)

Haftka, Joris J H; Scherpenisse, Peter; Oetter, G??nter; Hodges, Geoff; Eadsforth, Charles V.; Kotthoff, Matthias; Hermens, Joop L M

The amphiphilic nature of surfactants drives the formation of micelles at the critical micelle concentration (CMC). Solid-phase microextraction (SPME) fibres were used in the present study to measure CMC values of twelve nonionic, anionic, cationic and zwitterionic surfactants. The SPME derived CMC

An experimental test of processes underlying self-disclosure in computer-mediated communication

NARCIS (Netherlands)

Schouten, A.P.; Valkenburg, P.M.; Peter, J.

2009-01-01

A consistent finding in computer-mediated communication (CMC) and Internet research is that, compared to face-toface communication, CMC results in higher levels of self-disclosure. We identified four possible mediators that may carry the influence of CMC on self-disclosure: self-presentation,

Experimental studies on cycling stable characteristics of inorganic phase change material CaCl2·6H2O-MgCl2·6H2O modified with SrCl2·6H2O and CMC

Science.gov (United States)

He, Meizhi; Yang, Luwei; Zhang, Zhentao

2018-01-01

By means of mass ratio method, binary eutectic hydrated salts inorganic phase change thermal energy storage system CaCl2·6H2O-20wt% MgCl2·6H2O was prepared, and through adding nucleating agent 1wt% SrCl2·6H2O and thickening agent 0.5wt% carboxy methyl cellulose (CMC), inoganic phase change material (PCM) modified was obtained. With recording cooling-melting curves simultaneously, this PCM was frozen and melted for 100 cycles under programmable temperature control. After per 10 cycles, the PCM was charaterized by differential scanning calorimeter (DSC), X-ray diffraction (XRD) and density meter, then analysing variation characteristics of phase change temperature, supercooling degree, superheat degree, latent heat, crystal structure and density with the increase of cycle index. The results showed that the average values of average phase change temperature for cooling and heating process were 25.70°C and 27.39°C respectively with small changes. The average values of average supercooling and superheat degree were 0.59°C and 0.49°C respectively, and the maximum value was 1.10°C. The average value and standard deviation of latent heat of fusion were 120.62 J/g and 1.90 J/g respectively. Non-molten white solid sediments resulted from phase separation were tachyhydrite (CaMg2Cl6·12H2O), which was characterized by XRD. Measuring density of the PCM after per 10 cycles, and the results suggested that the total mass of tachyhydrite was limited. In summary, such modified inoganic PCM CaCl2·6H2O-20wt% MgCl2·6H2O-1wt% SrCl2·6H2O-0.5wt% CMC could stay excellent circulation stability within 100 cycles, and providing reference value in practical use.

Effect of electron beam irradiation on the viscosity of carboxymethylcellulose solution

International Nuclear Information System (INIS)

Choi, Jong-il; Lee, Hee-Sub; Kim, Jae-Hun; Lee, Kwang-Won; Chung, Young-Jin; Byun, Myung-Woo; Lee, Ju-Woon

2008-01-01

In this study, the effects of an electron beam irradiation on the viscosity of a carboxymethylcellulose (CMC) solution were investigated. The viscosity of the CMC solution was decreased with an increase in the irradiation dose. Interestingly, the extent of the degradation of the CMC was found to decrease with an increase of the CMC concentration in the solution. The change of the average molar mass confirmed the decrease in the viscosity due to the degradation of the polymer. The energy of the electron beam also affected the degradation of the CMC. Lower degradation of the CMC was obtained with a decreasing electron beam energy due to its lower penetration. Addition of vitamin C as a radical scavenger to the solution and an irradiation at -70 deg. C were shown to be moderately effective in preventing a decrease in the viscosity of the solution by irradiation.

Effect of electron beam irradiation on the viscosity of carboxymethylcellulose solution

Science.gov (United States)

Choi, Jong-il; Lee, Hee-Sub; Kim, Jae-Hun; Lee, Kwang-Won; Chung, Young-Jin; Byun, Myung-Woo; Lee, Ju-Woon

2008-12-01

In this study, the effects of an electron beam irradiation on the viscosity of a carboxymethylcellulose (CMC) solution were investigated. The viscosity of the CMC solution was decreased with an increase in the irradiation dose. Interestingly, the extent of the degradation of the CMC was found to decrease with an increase of the CMC concentration in the solution. The change of the average molar mass confirmed the decrease in the viscosity due to the degradation of the polymer. The energy of the electron beam also affected the degradation of the CMC. Lower degradation of the CMC was obtained with a decreasing electron beam energy due to its lower penetration. Addition of vitamin C as a radical scavenger to the solution and an irradiation at -70 °C were shown to be moderately effective in preventing a decrease in the viscosity of the solution by irradiation.

Effect of electron beam irradiation on the viscosity of carboxymethylcellulose solution

Energy Technology Data Exchange (ETDEWEB)

Choi, Jong-il [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, 1266 Sinjeong-dong, Jeongeup 580-185 (Korea, Republic of); Lee, Hee-Sub [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, 1266 Sinjeong-dong, Jeongeup 580-185 (Korea, Republic of); Department of Food and Nutrition, Chungnam National University, Daejeon 305-764 (Korea, Republic of); Kim, Jae-Hun [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, 1266 Sinjeong-dong, Jeongeup 580-185 (Korea, Republic of); Lee, Kwang-Won [Department of Orthopaedic Surgery, Eulji University School of Medicine, Daejeon 302-799 (Korea, Republic of); Chung, Young-Jin [Department of Food and Nutrition, Chungnam National University, Daejeon 305-764 (Korea, Republic of); Byun, Myung-Woo [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, 1266 Sinjeong-dong, Jeongeup 580-185 (Korea, Republic of); Lee, Ju-Woon [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, 1266 Sinjeong-dong, Jeongeup 580-185 (Korea, Republic of)], E-mail: sjwlee@kaeri.re.kr

2008-12-15

In this study, the effects of an electron beam irradiation on the viscosity of a carboxymethylcellulose (CMC) solution were investigated. The viscosity of the CMC solution was decreased with an increase in the irradiation dose. Interestingly, the extent of the degradation of the CMC was found to decrease with an increase of the CMC concentration in the solution. The change of the average molar mass confirmed the decrease in the viscosity due to the degradation of the polymer. The energy of the electron beam also affected the degradation of the CMC. Lower degradation of the CMC was obtained with a decreasing electron beam energy due to its lower penetration. Addition of vitamin C as a radical scavenger to the solution and an irradiation at -70 deg. C were shown to be moderately effective in preventing a decrease in the viscosity of the solution by irradiation.

Organization of the M-6000 computer calculating process in the CAMAC on-line measurement systems for a physical experiment

International Nuclear Information System (INIS)

Bespalova, T.V.; Volkov, A.S.; Golutvin, I.A.; Maslov, V.V.; Nevskaya, N.A.; Okonishnikov, A.A.; Terekhov, V.E.; Shilkin, I.P.

1977-01-01

Discussed are the basic results of the work on designing the software of the computer measuring complex (CMC) which uses the M-6000 computer and operates on line with an accelerator. All the CMC units comply with the CAMAC standard. The CMC incorporates a mainframe memory, twenty-four kilobytes of 16-digit words in size, and external memory on magnetic disks, 1 megabyte in size. Suggested is a modification of the technique for designing the CMC software providing for program complexes which are dynamically adjusted by an experimentalist for the given experiment for a short time. The CMC software comprises the following major portions: a software generator, data acquisition program, on-line data processing routines, off-line data processing programs and programs for data recording on magnetic tapes and disks. Testing of the designed CMC has revealed that the total data processing time equals to from 150 to 500 ms

Aging study on carboxymethyl cellulose-coated zero-valent iron nanoparticles in water: Chemical transformation and structural evolution

Energy Technology Data Exchange (ETDEWEB)

Dong, Haoran, E-mail: dongh@hnu.edu.cn [College of Environmental Science and Engineering, Hunan University, Changsha, Hunan 410082 (China); Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha, Hunan 410082 (China); Zhao, Feng; Zeng, Guangming; Tang, Lin; Fan, Changzheng; Zhang, Lihua; Zeng, Yalan; He, Qi; Xie, Yankai; Wu, Yanan [College of Environmental Science and Engineering, Hunan University, Changsha, Hunan 410082 (China); Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha, Hunan 410082 (China)

2016-07-15

Highlights: • The chemical transformation and structural evolution of CMC-nZVI were investigated. • CMC could slow down the aging rate of nZVI and alter the species transformation. • Fe{sub 3}O{sub 4} and/or γ-Fe{sub 2}O{sub 3} are the dominant corrosion products of bare nZVI after aging. • γ-FeOOH is the primary corrosion product of CMC-nZVI after aging. - Abstract: To assess the long-term fate and the associated risks of nanoscale zero-valent iron (nZVI) used in the water remediation, it is essential to understand the chemical transformations during aging of nZVI in water. This study investigated the compositional and structural evolution of bare nZVI and carboxymethyl cellulose (CMC) coated nZVI in static water over a period of 90 days. Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), X-ray diffraction (XRD) and Raman spectroscopy were used to characterize the corrosion products of nZVI and CMC-nZVI. Results show that both the structures and the compositions of the corrosion products change with the process of aging, but the coating of CMC could slow down the aging rate of nZVI (as indicated by the slower drop in Fe{sup 0} intensity in XRD pattern). For the bare nZVI, magnetite (Fe{sub 3}O{sub 4}) and/or maghemite (γ-Fe{sub 2}O{sub 3}) are the dominant corrosion products after 90 days of aging. However, for the CMC-nZVI, the core-shell spheres collapses to acicular-shaped structures after aging with crystalline lepidocrocite (γ-FeOOH) as the primary end product. Moreover, more lepidocrocite present in the corrosion products of CMC-nZVI with higher loading of CMC, which reveals that the CMC coating could influence the transformation of iron oxides.

Aging study on carboxymethyl cellulose-coated zero-valent iron nanoparticles in water: Chemical transformation and structural evolution

International Nuclear Information System (INIS)

Dong, Haoran; Zhao, Feng; Zeng, Guangming; Tang, Lin; Fan, Changzheng; Zhang, Lihua; Zeng, Yalan; He, Qi; Xie, Yankai; Wu, Yanan

2016-01-01

Highlights: • The chemical transformation and structural evolution of CMC-nZVI were investigated. • CMC could slow down the aging rate of nZVI and alter the species transformation. • Fe_3O_4 and/or γ-Fe_2O_3 are the dominant corrosion products of bare nZVI after aging. • γ-FeOOH is the primary corrosion product of CMC-nZVI after aging. - Abstract: To assess the long-term fate and the associated risks of nanoscale zero-valent iron (nZVI) used in the water remediation, it is essential to understand the chemical transformations during aging of nZVI in water. This study investigated the compositional and structural evolution of bare nZVI and carboxymethyl cellulose (CMC) coated nZVI in static water over a period of 90 days. Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), X-ray diffraction (XRD) and Raman spectroscopy were used to characterize the corrosion products of nZVI and CMC-nZVI. Results show that both the structures and the compositions of the corrosion products change with the process of aging, but the coating of CMC could slow down the aging rate of nZVI (as indicated by the slower drop in Fe"0 intensity in XRD pattern). For the bare nZVI, magnetite (Fe_3O_4) and/or maghemite (γ-Fe_2O_3) are the dominant corrosion products after 90 days of aging. However, for the CMC-nZVI, the core-shell spheres collapses to acicular-shaped structures after aging with crystalline lepidocrocite (γ-FeOOH) as the primary end product. Moreover, more lepidocrocite present in the corrosion products of CMC-nZVI with higher loading of CMC, which reveals that the CMC coating could influence the transformation of iron oxides.

Polyaniline coated magnetic carboxymethylcellulose beads for selective removal of uranium ions from aqueous solution

International Nuclear Information System (INIS)

Yakup Arica, M.; Gulay Bayramoglu; Gazi University, Ankara

2016-01-01

Magnetic carboxymethylcellulose (CMC) beads were prepared via ionic cross-linking. Then CMC beads were coated with polyaniline (PANI). The results of FTIR, SEM, DTA and N 2 adsorption-desorption demonstrated that aniline was successfully grafted onto the surface of mCMC beads. The potential use of the prepared adsorbent was used for removal of U(VI) ions. The determined maximum adsorption capacities of the mCMC and mCMC-g-PANI beads for U(VI) ions were 129.4 and 386.5 mg/g dry weight at pH 4.5, respectively. The thermodynamic parameters (ΔH°, ΔS° and ΔG°) were evaluated. The adsorbent systems were regenerated using 0.1 M HCl. (author)

Experimental and QSAR study on the surface activities of alkyl imidazoline surfactants

Science.gov (United States)

Kong, Xiangjun; Qian, Chengduo; Fan, Weiyu; Liang, Zupei

2018-03-01

15 alkyl imidazoline surfactants with different structures were synthesized and their critical micelle concentration (CMC) and surface tension under the CMC (σcmc) in aqueous solution were measured at 298 K. 54 kinds of molecular structure descriptors were selected as independent variables and the quantitative structure-activity relationship (QSAR) between surface activities of alkyl imidazoline and molecular structure were built through the genetic function approximation (GFA) method. Experimental results showed that the maximum surface excess of alkyl imidazoline molecules at the gas-liquid interface increased and the area occupied by each surfactant molecule and the free energies of micellization ΔGm decreased with increasing carbon number (NC) of the hydrophobic chain or decreasing hydrophilicity of counterions, which resulted in a CMC and σcmc decrease, while the log CMC and NC had a linear relationship and a negative correlation. The GFA-QSAR model, which was generated by a training set composed of 13 kinds of alkyl imidazoline though GFA method regression analysis, was highly correlated with predicted values and experimental values of the CMC. The correlation coefficient R was 0.9991, which means high prediction accuracy. The prediction error of 2 kinds of alkyl imidazoline CMCs in the Validation Set that quantitatively analyzed the influence of the alkyl imidazoline molecular structure on the CMC was less than 4%.

Perpetration of teen dating violence in a networked society.

Science.gov (United States)

Korchmaros, Josephine D; Ybarra, Michele L; Langhinrichsen-Rohling, Jennifer; Boyd, Danah; Lenhart, Amanda

2013-08-01

Teen dating violence (TDV) is a serious form of youth violence that youth fairly commonly experience. Although youth extensively use computer-mediated communication (CMC), the epidemiology of CMC-based TDV is largely unknown. This study examined how perpetration of psychological TDV using CMC compares and relates to perpetration using longer-standing modes of communication (LSMC; e.g., face-to-face). Data from the national Growing up with Media study involving adolescents aged 14-19 collected from October 2010 to February 2011 and analyzed May 2012 are reported. Analyses focused on adolescents with a history of dating (n=615). Forty-six percent of youth daters had perpetrated psychological TDV. Of those who perpetrated in the past 12 months, 58% used only LSMC, 17% used only CMC, and 24% used both. Use of both CMC and LSMC was more likely among perpetrators who used CMC than among perpetrators who used LSMC. In addition, communication mode and type of psychological TDV behavior were separately related to frequency of perpetration. Finally, history of sexual intercourse was the only characteristic that discriminated between youth who perpetrated using different communication modes. Results suggest that perpetration of psychological TDV using CMC is prevalent and is an extension of perpetration using LSMC. Prevention should focus on preventing perpetration of LSMC-based TDV as doing so would prevent LSMC as well as CMC-based TDV.

Viscosity sinergism of hydrozypropmethyl and carboxy methyl cellulose

Directory of Open Access Journals (Sweden)

Katona Jaroslav M.

2008-01-01

Full Text Available Rheology modifiers are common constituents of food, cosmetic and pharmaceutic products. Often, by using two or more of them, better control of the product rheological properties can be achieved. In this work, rheological properties of hydroxypropymethyl cellulose (HPMC and sodium carboxymethyl cellulose (NaCMC solutions of different concentrations were investigated and compared to the flow properties of 1% HPMC/NaCMC binary mixtures at various HPMC/NaCMC mass ratios. Solutions of HPMC and NaCMC were found to be pseudoplastic, where pseudoplasticity increases with increase in the macromolecules concentration. Changes of the degree of pseudoplasticity, n as well as the coefficient of consistency, K with the concentration are more pronounced in HPMC solutions when compared to the NaCMC ones. This is mostly due to the ability of HPMC molecules to associate with each other at concentrations above critical overlap concentration, c , and greater flexibility of macromolecular chains. Binary mixtures of HPMC/NaCMC were also found to be pseudoplastic. Experimentally obtained viscosities of the mixture were proved to be larger than theoretically expected ones, indicating viscosity synergism as a consequence of HPMC-NaCMC interaction. Maximum in synergy was observed when HPMC/NaCMC mass ratio was 0.4/0.6, no matter of the shear rate applied. On the other hand, it was found that relative positive deviation, RPD decreases when shear rate is increased.

From psychotherapy to e-therapy: the integration of traditional techniques and new communication tools in clinical settings.

Science.gov (United States)

Castelnuovo, Gianluca; Gaggioli, Andrea; Mantovani, Fabrizia; Riva, Giuseppe

2003-08-01

Technology is starting to influence psychological fields. In particular, computer-mediated communication (CMC) is providing new tools that can be fruitfully applied in psychotherapy. These new technologies do not substitute for traditional techniques and approaches but they could be used as integration in the clinical process, enhancing or making easier particular steps of it. This paper focuses on the concept of e-therapy as a new modality of helping people resolve life and relationship issues. It utilizes the power and convenience of the Internet to allow synchronous and asynchronous communication between patient and therapist. It is important to underline that e-therapy is not an alternative treatment, but a resource that can be added to traditional psychotherapy. The paper also discusses how different forms of CMC can be fruitfully applied in psychology and psychotherapy, by evaluating the effectiveness of them in the clinical practice. To enhance the diffusion of e-therapy, further research is needed to evaluate all the pros and cons.

40 CFR 247.10 - Paper and paper products.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Paper and paper products. 247.10... COMPREHENSIVE PROCUREMENT GUIDELINE FOR PRODUCTS CONTAINING RECOVERED MATERIALS Item Designations § 247.10 Paper and paper products. Paper and paper products, excluding building and construction paper grades. ...

Large thermal protection system panel

Science.gov (United States)

Weinberg, David J. (Inventor); Myers, Franklin K. (Inventor); Tran, Tu T. (Inventor)

2003-01-01

A protective panel for a reusable launch vehicle provides enhanced moisture protection, simplified maintenance, and increased temperature resistance. The protective panel includes an outer ceramic matrix composite (CMC) panel, and an insulative bag assembly coupled to the outer CMC panel for isolating the launch vehicle from elevated temperatures and moisture. A standoff attachment system attaches the outer CMC panel and the bag assembly to the primary structure of the launch vehicle. The insulative bag assembly includes a foil bag having a first opening shrink fitted to the outer CMC panel such that the first opening and the outer CMC panel form a water tight seal at temperatures below a desired temperature threshold. Fibrous insulation is contained within the foil bag for protecting the launch vehicle from elevated temperatures. The insulative bag assembly further includes a back panel coupled to a second opening of the foil bag such that the fibrous insulation is encapsulated by the back panel, the foil bag, and the outer CMC panel. The use of a CMC material for the outer panel in conjunction with the insulative bag assembly eliminates the need for waterproofing processes, and ultimately allows for more efficient reentry profiles.

Improved lifetime of chitosan film in converting water vapor to electrical power by adding carboxymethyl cellulose

Science.gov (United States)

Nasution, T. I.; Balyan, M.; Nainggolan, I.

2018-02-01

A Water vapor cell based on chitosan film has been successfully fabricated in film form to convert water vapor to electrical power. In order to improve the lifetime of water vapor cell, Carboxymethyl Cellulose (CMC) was added into 1% chitosan solution within concentration variations of 0.01, 0.05, 0.1 and 0.5%. The result showed that the lifetime of water vapor cell increased higher by adding the higher concentration of Carboxymethyl cellulose. The highest lifetime was evidenced by adding 0.5%CMC which maintained for 48 weeks. However, the average electrical power became lower to 4.621 µW. This electrical power lower than the addition of 0.1%CMC which maintained for 5.167 µW. While, the lifetime of chitosan-0.1%CMC film of 44 weeks is shorter compared to chitosan-0.5%CMC film. Based on FTIR characterization, it was founded that the chitosan structure did not change until the addition of 0.1%CMC. This caused the electrical power of water vapor cell degenerated. Therefore, chitosan-0.5%CMC film has excellent lifetime in converting water vapor to electrical power.

Papers

DEFF Research Database (Denmark)

Thoft-Christensen, Palle

The chapters in this Volume 7 of a series of PAPERS are based on papers published in the period 2004 - 2008 authored/co-authored by Palle Thoft-Christensen......The chapters in this Volume 7 of a series of PAPERS are based on papers published in the period 2004 - 2008 authored/co-authored by Palle Thoft-Christensen...

Removal of uranium (VI) from aqueous systems by nanoscale zero-valent iron particles suspended in carboxy-methyl cellulose

Energy Technology Data Exchange (ETDEWEB)

Popescu, Ioana-Carmen, E-mail: ioana.popescu@icpmrr.ro [R and D National Institute for Metals and Radioactive Resources – ICPMRR Bucharest B-dul Carol I No. 70, Sector 2, 202917 Bucharest (Romania); Filip, Petru [C. D. Nenitescu Institute of Organic Chemistry, Splaiul Independentei 202B, Sector 6, 71141 Bucharest (Romania); Humelnicu, Doina, E-mail: doinah@uaic.ro [Al.I. Cuza University of Iasi, The Faculty of Chemistry, Bd. Carol-I No. 11, Iasi 700506 (Romania); Humelnicu, Ionel [Al.I. Cuza University of Iasi, The Faculty of Chemistry, Bd. Carol-I No. 11, Iasi 700506 (Romania); Scott, Thomas Bligh; Crane, Richard Andrew [Interface Analysis Centre, University of Bristol, 121 St. Michael’s Hill, Bristol BS2 8BS (United Kingdom)

2013-11-15

Carboxy-methyl-cellulose (CMC), a common “delivery vehicle” for the subsurface deployment of iron nanoparticles (INP) has been tested in the current work for the removal of aqueous uranium from synthetic water samples. A comparison of the removal of aqueous uranium from solutions using carboxy-methyl-cellulose with and without iron nanoparticles (CMC–INP and CMC, respectively) was tested over a 48 h reaction period. Analysis of liquid samples using spectrophotometry determined a maximum sorption capacity of uranium, Q{sub max}, of 185.18 mg/g and 322.58 mg/g for CMC and CMC–INP respectively, providing strong evidence of an independent aqueous uranium removal ability exhibited by CMC. The results point out that CMC provides an additional capacity for aqueous uranium removal. Further tests are required to determine whether similar behaviour will be observed for other aqueous contaminant species and if the presence of CMC within a INP slurry inhibits or aids the reactivity, reductive capacity and affinity of INP for aqueous contaminant removal.

Formation of carboxymethyl cellulose hydrogel containing silver nanoparticle

Energy Technology Data Exchange (ETDEWEB)

Park, Jong Seok; Kuang, Jia; Gwon, Hui Jeong; Lim, Youn Mook; Nho, Young Chang [Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)

2010-12-15

Silver nanoparticles (AgNPs) can be used in the areas such as integrate circuit, cell electrode and antimicrobial deodorant. In this study, AgNPs have been prepared by using AgNO{sub 3} aqueous solution in the carboxymethyl cellulose (CMC) hydrogel. CMC powders were dissolved in deionized water, and then irradiated by a gamma-ray with a radiation dose of 50 kGy to make CMC hydrogel. CMC hydrogels were dipped into 1.0 x 10{sup -2} M AgNO{sub 3} solution for 1 hour. After that, the swollen hydrogels were irradiated by gamma-ray for the formation of AgNPs. The characteristics of silver nanoparticles in the CMC hydrogels were monitored by UV-Vis and the morphological study and dispersed coefficient of particles were investigated by FE-SEM/EDX. It was observed that the sodium salt in the CMC is crucial to the formation of silver nanoparticle. Finally, antibacterial tests indiacted that the hydrogel containing silver nanoparticle has antibacterial activity.

Cast Metals Coalition Technology Transfer and Program Management Final Report

Energy Technology Data Exchange (ETDEWEB)

Gwyn, Mike

2009-03-31

. Without collaboration, new technologies enabling energy efficiencies and environment-friendly improvements are slow to develop, and have trouble obtaining a broad application. The CMC team was able to effectively and efficiently transfer the results of DOE's metalcasting R&D projects to industry by utilizing and delivering the numerous communication vehicles identified in the proposal. The three metalcasting technical associations achieved significant technology transition results under this program. In addition to reaching over 23,000 people per year through Modern Casting and 28,000 through Engineered Casting Solutions, AFS had 84 national publications and reached over 1,200 people annually through Cast Metals Institute (CMI) education courses. NADCA's education department reached over 1,000 people each year through their courses, in addition to reaching over 6,000 people annually through Die Casting Engineer, and publishing 58 papers. The SFSA also published 99 research papers and reached over 1,000 people annually through their member newsletters. In addition to these communication vehicles, the CMC team conducted numerous technical committee meetings, project reviews, and onsite visits. All of these efforts to distribute the latest metalcasting technologies contributed to the successful deployment of DOE's R&D projects into industry. The DOE/CMC partnership demonstrated significant success in the identification and review of relevant and easy-to-implement metalcasting energy-saving processes and technologies so that the results are quickly implemented and become general practice. The results achieved in this program demonstrate that sustained technology transfer efforts are a critical step in the deployment of R&D projects to industry.

Estimation hydrophilic-lipophilic balance number of surfactants

Energy Technology Data Exchange (ETDEWEB)

Pawignya, Harsa, E-mail: harsa-paw@yahoo.co.id [Chemical Engineering Department Diponegoro University (Indonesia); Chemical Engineering Departement University of Pembangunan Nasional Yogyakarta (Indonesia); Prasetyaningrum, Aji, E-mail: ajiprasetyaningrum@gmail.com; Kusworo, Tutuk D.; Pramudono, Bambang, E-mail: Pramudono2004@yahoo.com [Chemical Engineering Department Diponegoro University (Indonesia); Dyartanti, Endah R. [Chemical Engineering Department Diponegoro University (Indonesia); Chemical Enginering Departement Sebelas Maret University (Indonesia)

2016-02-08

Any type of surfactant has a hydrophilic-lipophilic balance number (HLB number) of different. There are several methods for determining the HLB number, with ohysical properties of surfactant (solubility cloud point and interfacial tension), CMC methods and by thermodynamics properties (Free energy Gibbs). This paper proposes to determined HLB numbers from interfelation methods. The result of study indicated that the CMC method described by Hair and Moulik espesially for nonionic surfactant. The application of exess Gibbs free energy and by implication activity coefficient provides the ability to predict the behavior of surfactants in multi component mixtures of different concentration. Determination of HLB number by solubility and cloud point parameter is spesific for anionic and nonionic surfactant but this methods not available for cationic surfactants.

Novel Pyridinium Surfactants with Unsaturated Alkyl Chains : Aggregation Behavior and Interactions with Methyl Orange in Aqueous Solution

NARCIS (Netherlands)

Kuiper, Johanna M.; Buwalda, Rixt T.; Hulst, Ron; Engberts, Jan B.F.N.

2001-01-01

This paper presents the synthesis and a study of the aggregation behavior of 4-undecyl-1-methyl- and 4-undecenyl-1-methylpyridinium iodide surfactants. The effect of the position of the double bond in the alkyl chain of the surfactant on the critical micelle concentration (cmc), degree of counterion

Exploring the use of computer-mediated video communication in engineering projects in South Africa

Directory of Open Access Journals (Sweden)

Meyer, Izak P.

2016-08-01

Full Text Available Globally-expanding organisations that are trying to capitalise on distributed skills are increasingly using virtual project teams to shorten product development time and increase quality. These virtual teams, which are distributed across countries, cultures, and time zones, are required to use faster and better ways of interacting. Past research has shown that virtual teams that use computer-mediated communication (CMC instead of face-to-face communication are less cohesive because they struggle with mistrust, controlling behaviour , and communication breakdowns. This study aims to determine whether project practitioners in South Africa perceive virtual teams that use videoconferencing as suffering from the same CMC disadvantages described in past research in other environments; and if they do, what the possible causes could be. This paper reports on a survey of 106 project practitioners in South Africa. The results show that these project practitioners prefer face- to-face communication over CMC, and perceive virtual teams using videoconferencing to be less cohesive and to suffer from mistrust and communication breakdowns, but not from increased conflict and power struggles. The perceived shortcomings of videoconferencing might result from virtual teams that use this medium having less time to build interpersonal relationships.

Achievement report (2/2) on R and D in fiscal 1999 on environment adaptive next-generation supersonic propulsion system. R and D of environment adaptive next-generation supersonic propulsion engine; 1999 nendo seika hokokusho. Kankyo tekigo gata jisedai choonsoku suishin system no kenkyu kaihatsu - Kankyo tekigo gata jisedai choonsokuki you enjin kaihatsu (2/2)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-12-01

With an objective to develop an environment adaptive next-generation supersonic propulsion system, research and development have been performed on noise reducing technologies, NOx exhaust reducing technologies, CO2 exhaust reducing technologies, and environment adaptive engine system technologies. This paper summarizes the achievements in fiscal 1999. In developing the CO2 exhaust reducing technologies, discussions were given on the following items as the researches on a technology to apply three-dimensional fiber-reinforced materials to large structures: application of metal-based composite materials (MMC) to the fan rotor; application of CMC, TiAl materials to turbine structural materials; TiAl shroud support, CMC shroud, high load turbine cascades supported by the composite materials, and application of the CMC, TiAl materials to the gas exhaust nozzle. In developing the environment adaptive engine system technologies, flows were established to judge the achievement of the project target of noise reduction, NOx exhaust reduction and CO2 exhaust suppression. Furthermore, in the demonstration and research of the engine integration, the setting was conducted on the engine test schedule, and so was the primary setting for criteria on parts to be assembled into the engine. (NEDO)

Controlled release fertilizers using superabsorbent hydrogel prepared by gamma radiation

International Nuclear Information System (INIS)

Elbarbary, Ahmed M.; Ghobashy, Mohamed Mohamady

2017-01-01

Superabsorbent hydrogels (PVP/CMC) based on polyvinylpyrrolidone (PVP)/carboxylmethyl cellulose (CMC) of different copolymer compositions were prepared by gamma radiation. Factors affecting the gel content (%) and the swelling ratio (g/g) of hydrogel such as irradiation dose as well as copolymer composition were investigated. With increasing the CMC content in PVP/CMC hydrogels, increases the swelling and improves the water retention capability. The high swelling ratio was observed at copolymer composition of PVP/CMC (60/40). Fast swelling of the hydrogels was obtained after 20 min. The effect of different fertilizers and buffers of different pH's on equilibrium swelling of hydrogels was investigated. Fertilizers such as urea, monopotassium-phosphate (MPK), and nitrogen-phosphate-potassium (NPK) were loaded onto the hydrogel to supply nitrogen, potassium and phosphorous nutrients. PVP/CMC hydrogels retained 28-36% after 72 h and slow retention was noticed up to 9 days. The swelling of hydrogel in fertilizer solutions is lower than that in water. The hydrogels showed adsorption desorption of fertilizers which governs by slow release property. The release rate of urea is much higher 10 times than that of phosphate. After 3 days, urea released 60%, while phosphate released 10-12%. The applicability of PVP/CMC hydrogels in the agricultural fields shows greater growth effect on zea maize plants. The growth of zea maize plant in soil mixed with PVP/CMC hydrogels loaded fertilizers is greater than untreated soil. The slow release fertilize, the high swelling and the slow water retention behaviors of PVP/CMC hydrogels encourage their use as safer release systems for fertilizers and as soil conditioner in agricultural applications.

Controlled release fertilizers using superabsorbent hydrogel prepared by gamma radiation

Energy Technology Data Exchange (ETDEWEB)

Elbarbary, Ahmed M.; Ghobashy, Mohamed Mohamady [Atomic Energy Authority, Nasr City (Egypt). National Center for Radiation Research and Technology (NCRTT)

2017-07-01

Superabsorbent hydrogels (PVP/CMC) based on polyvinylpyrrolidone (PVP)/carboxylmethyl cellulose (CMC) of different copolymer compositions were prepared by gamma radiation. Factors affecting the gel content (%) and the swelling ratio (g/g) of hydrogel such as irradiation dose as well as copolymer composition were investigated. With increasing the CMC content in PVP/CMC hydrogels, increases the swelling and improves the water retention capability. The high swelling ratio was observed at copolymer composition of PVP/CMC (60/40). Fast swelling of the hydrogels was obtained after 20 min. The effect of different fertilizers and buffers of different pH's on equilibrium swelling of hydrogels was investigated. Fertilizers such as urea, monopotassium-phosphate (MPK), and nitrogen-phosphate-potassium (NPK) were loaded onto the hydrogel to supply nitrogen, potassium and phosphorous nutrients. PVP/CMC hydrogels retained 28-36% after 72 h and slow retention was noticed up to 9 days. The swelling of hydrogel in fertilizer solutions is lower than that in water. The hydrogels showed adsorption desorption of fertilizers which governs by slow release property. The release rate of urea is much higher 10 times than that of phosphate. After 3 days, urea released 60%, while phosphate released 10-12%. The applicability of PVP/CMC hydrogels in the agricultural fields shows greater growth effect on zea maize plants. The growth of zea maize plant in soil mixed with PVP/CMC hydrogels loaded fertilizers is greater than untreated soil. The slow release fertilize, the high swelling and the slow water retention behaviors of PVP/CMC hydrogels encourage their use as safer release systems for fertilizers and as soil conditioner in agricultural applications.

Education and the Economy: What Should We Teach? When? How? To Whom? Occasional Paper No. 4.

Science.gov (United States)

Berryman, Sue E.

Economic changes and demographic realities may require fundamental changes in what individuals need to learn, how and when they need to learn it, and who needs to learn it. Examination of three strands of research should clarify these issues. The first strand consists of research on changes in the nature and structure of work and in the capacities…

Evaluating Academic Programs Abroad: The CIEE Project. CIEE Occasional Papers on International Educational Exchange No. 21.

Science.gov (United States)

Abrams, Irwin; Heller, Francis H.

The evaluation of overseas educational programs for U.S. students by the Council on International Educational Exchange (CIEE) is discussed. The history of the CIEE is reviewed from its beginnings in 1947 when its members were national programming agencies concerned with making travel arrangements for summer programs. As the CIEE grew in…

The New Bibliotheca Alexandrina: A Link in the Historical Chain of Cultural Continuity. Occasional Paper 3.

Science.gov (United States)

Aman, Mohammed M.

The first universal library in history, the Alexandrian Library, was established in the fourth century B.C. in Greece and disappeared in the third and fourth centuries A.D., according to various accounts. In an attempt to preserve Egypt's historical heritage, the Egyptian government has decided to build a new library in its place--the Bibliotheca…

Comparison of Childrearing Practices of Anglos, Cuban-Americans, and Latin Americans. Occasional Papers Series, Dialogues #5.

Science.gov (United States)

Escovar, Luis; Escovar, Peggy L.

In this report perceived childrearing practices among three cultural groups (American Anglos, Cuban Americans, and Latin Americans) were compared. Subjects were 445 college students (168 males and females from universities in Colombia and Venezuela, and 154 from a university in South Florida). A multivariate analysis of covariance was used to…

Fewer Rebels, Fewer Causes: A Profile of Today's College Freshmen. Monitoring the Future Occasional Paper 4.

Science.gov (United States)

Bachman, Jerald G.; Johnston, Lloyd D.

The opinions of nearly 17,000 college-bound and noncollege-bound high school seniors concerning a wide range of issues of both personal and social significance were surveyed in 1979 at the end of the senior year. Developing successful personal relationships, particularly a good marriage and family life, ranked at the top of freshman goals in life,…

Comprehensive Bibliography of Pakistan Archaeology: Paleolithic to Historic Times. South Asia Series, Occasional Paper No. 24.

Science.gov (United States)

King, Denise E.

The comprehensive bibliography is a compilation of twentieth century documents about Pakistan prehistory from Paleolithic times to the arrival of the Greeks in approximately 330 B.C., also includes some of the major archaeological studies in adjacent countries which have a bearing on the interpretation and comparative analysis of Pakistan…

Does occupational therapy reduce the need for surgery in carpometacarpal osteoarthritis? Protocol for a randomized controlled trial.

Science.gov (United States)

Kjeken, Ingvild; Eide, Ruth Else Mehl; Klokkeide, Åse; Matre, Karin Hoegh; Olsen, Monika; Mowinckel, Petter; Andreassen, Øyvor; Darre, Siri; Nossum, Randi

2016-11-15

In the absence of disease-modifying interventions for hand osteoarthritis (OA), occupational therapy (OT) comprising patient education, hand exercises, assistive devices and orthoses are considered as core treatments, whereas surgery are recommended for those with severe carpometacarpal (CMC1) OA. However, even though CMC1 surgery may reduce pain and improve function, the risk of adverse effects is high, and randomized controlled trials comparing surgery with non-surgical interventions are warranted. This multicentre randomized controlled trial aims to address the following questions: Does OT in the period before surgical consultation reduce the need for surgery in CMC1-OA? What are patients' motivation and reasons for wanting CMC1-surgery? Are there differences between departments of rheumatology concerning the degree of CMC1-OA, pain and functional limitations in patients who are referred for surgical consultation for CMC1 surgery? Is the Measure of Activity Performance of the Hand a reliable measure in patients with CMC1-OA? Do patients with CMC1-OA with and without affection of the distal and proximal interphalangeal finger joints differ with regard to symptoms and function? Do the degree of CMC1-OA, symptoms and functional limitations significantly predict improvement after 2 years following OT or CMC1-surgery? Is OT more cost-effective than surgery in the management of CMC1-OA? All persons referred for surgical consultation due to their CMC1-OA at one of three Norwegian departments of rheumatology are invited to participate. Those who agree attend a clinical assessment and report their symptoms, function and motivation for surgery in validated outcome measures, before they are randomly selected to receive OT in the period before surgical consultation (estimated n = 180). The primary outcome will be the number of participants in each group who have received surgical treatment after 2 years. Secondary and tertiary outcomes are pain, function and

Computer-mediated communication in adults with high-functioning autism spectrum disorders and controls

NARCIS (Netherlands)

van der Aa, Christine; Pollmann, Monique; Plaat, Aske; van der Gaag, Rutger Jan

2016-01-01

It has been suggested that people with Autism Spectrum Disorders (ASD) are attracted to computer-mediated communication (CMC). In this study, we compare CMC use in adults with high-functioning ASD (N = 113) and a control group (N = 72). We find that people with ASD spend more time on CMC than

Fabrication of polyaniline/carboxymethyl cellulose/cellulose nanofibrous mats and their biosensing application

International Nuclear Information System (INIS)

Fu, Jiapeng; Pang, Zengyuan; Yang, Jie; Huang, Fenglin; Cai, Yibing; Wei, Qufu

2015-01-01

Graphical abstract: - Highlights: • PANI nanorods have been grown onto the surface of CMC/cellulose nanofibers for the fabrication of biosensor substrate material. • The proposed laccase biosensor exhibited a low detection limit and high sensitivity in the detection of catechol. • Hierarchical PANI/CMC/cellulose nanofibers are the promising material in the design of high-efficient biosensors. - Abstract: We report a facile approach to synthesizing and immobilizing polyaniline nanorods onto carboxymethyl cellulose (CMC)-modified cellulose nanofibers for their biosensing application. Firstly, the hierarchical PANI/CMC/cellulose nanofibers were fabricated by in situ polymerization of aniline on the CMC-modified cellulose nanofiber. Subsequently, the PANI/CMC/cellulose nanofibrous mat modified with laccase (Lac) was used as biosensor substrate material for the detection of catechol. PANI/CMC/cellulose nanofibers with highly conductive and three dimensional nanostructure were characterized by scanning electron microscopy (SEM), transmission electron microscope (TEM), Fourier transform infrared spectra (FT-IR), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Under optimum conditions, the Lac/PANI/CMC/cellulose/glassy carbon electrode (GCE) exhibited a fast response time (within 8 s), a linear response range from 0.497 μM to 2.27 mM with a high sensitivity and low detection limit of 0.374 μM (3σ). The developed biosensor also displayed good repeatability, reproducibility as well as selectivity. The results indicated that the composite mat has potential application in enzyme biosensors

Physicochemical properties of soy protein isolate/carboxymethyl cellulose blend films crosslinked by Maillard reactions: Color, transparency and heat-sealing ability

International Nuclear Information System (INIS)

Su Junfeng; Yuan Xiaoyan; Huang Zhen; Wang Xinyu; Lu Xuzhen; Zhang Lidan; Wang Shengbao

2012-01-01

Soy protein isolate (SPI) films have many potential applications in the biomaterial field as surgical dressings for burns, films for reduction of wound inflammation, and facial masks. The appearance and the sealing ability are important physicochemical properties that greatly influence consumer acceptance of such protein-based films. The aim of the present work was to investigate the chemical structure and the physical properties associated with color, transparency and heat-sealing ability for SPI/carboxymethyl cellulose (CMC) blend films prepared by solution casting, with weight proportions 90/10, 80/20, 70/30 and 60/40. Fourier transform infra-red (FTIR) and solid-state 13 C nuclear magnetic resonance (NMR) spectra confirmed that Maillard reactions occurred between SPI and CMC. The Hunter color value (L, a, b) and transparency of films were affected by varying the proportions of SPI and CMC. With increasing degree of crosslinking of SPI and CMC, the yellow color of the films was diluted and transparency was improved. Peel strength and tensile strength measurements showed that the Maillard reactions had the main effect of enhancing the heat-sealing ability above the melting temperature. These results indicated that the structure and properties of SPI-based films could be modified and improved by blending with CMC. - Highlights: ► Maillard reactions occurred in SPI/CMC films. ► The color and transparency of SPI/CMC films were affected by Maillard reactions. ► Maillard reactions enhanced the heat-sealing ability of SPI/CMC films.

Fabrication of polyaniline/carboxymethyl cellulose/cellulose nanofibrous mats and their biosensing application

Energy Technology Data Exchange (ETDEWEB)

Fu, Jiapeng, E-mail: firgexiao@sina.cn; Pang, Zengyuan, E-mail: pangzengyuan1212@163.com; Yang, Jie, E-mail: young1993@126.com; Huang, Fenglin, E-mail: flhuang@jiangnan.edu.cn; Cai, Yibing, E-mail: yibingcai@jiangnan.edu.cn; Wei, Qufu, E-mail: qfwei@jiangnan.edu.cn

2015-09-15

Graphical abstract: - Highlights: • PANI nanorods have been grown onto the surface of CMC/cellulose nanofibers for the fabrication of biosensor substrate material. • The proposed laccase biosensor exhibited a low detection limit and high sensitivity in the detection of catechol. • Hierarchical PANI/CMC/cellulose nanofibers are the promising material in the design of high-efficient biosensors. - Abstract: We report a facile approach to synthesizing and immobilizing polyaniline nanorods onto carboxymethyl cellulose (CMC)-modified cellulose nanofibers for their biosensing application. Firstly, the hierarchical PANI/CMC/cellulose nanofibers were fabricated by in situ polymerization of aniline on the CMC-modified cellulose nanofiber. Subsequently, the PANI/CMC/cellulose nanofibrous mat modified with laccase (Lac) was used as biosensor substrate material for the detection of catechol. PANI/CMC/cellulose nanofibers with highly conductive and three dimensional nanostructure were characterized by scanning electron microscopy (SEM), transmission electron microscope (TEM), Fourier transform infrared spectra (FT-IR), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Under optimum conditions, the Lac/PANI/CMC/cellulose/glassy carbon electrode (GCE) exhibited a fast response time (within 8 s), a linear response range from 0.497 μM to 2.27 mM with a high sensitivity and low detection limit of 0.374 μM (3σ). The developed biosensor also displayed good repeatability, reproducibility as well as selectivity. The results indicated that the composite mat has potential application in enzyme biosensors.

Performance and Durability of Environmental Barrier Coatings on SiC/SiC Ceramic Matrix Composites

Science.gov (United States)

Zhu, Dongming; Harder, Bryan; Bhatt, Ramakrishna

2016-01-01

This presentation highlights advanced environmental barrier coating (EBC) and SiC-SiC Ceramic Matrix Composites (CMC) systems for next generation turbine engines. The emphasis will be placed on fundamental coating and CMC property evaluations; and the integrated system performance and degradation mechanisms in simulated laboratory turbine engine testing environments. Long term durability tests in laser rig simulated high heat flux the rmomechanical creep and fatigue loading conditions will also be presented. The results can help improve the future EBC-CMC system designs, validating the advanced EBC-CMC technologies for hot section turbine engine applications.

Modification of Natural Polymers by Radiation-Induced Processing for Versatile Applications

International Nuclear Information System (INIS)

Nagasawa, N.; Hiroki, A.; Tamada, M.

2010-01-01

Radiation-crosslinking mechanism of polysaccharide derivatives such as carboxymethyl cellulose (CMC), carboxymethyl chitosan (CMCts) is not clarified yet. Radicals in CMC formed by reaction with OH radical were studied by ESR in order to elucidate the radiation-crosslinking mechanism of CMC. ESR spectra implied that radicals were created on carboxymethyl groups linked to C2, C3 and C6 of glucose unit in CMC. The radicals of CMCts were also created on carboxymethyl groups linked to C3 and C6 of glusamine unit. For application of carboxymethyl cellulose (CMC) to a super water-adsorbent, gel fraction should be adjusted to the range of 50%. It was found that gel fraction of CMC could be control by the irradiation temperature of CMC aqueous paste-like state. Poly(L-lactic acid)(PLLA) could be crosslinked when it was irradiated with coexistence of crosslinker, triallyl isocyanurate. However, the crosslinked PLLA is thermally deformed under the stress at 70 °C. The thermo mechanical stability of PLLA was further improved by the adding SiO 2 and the post heating at 90 °C. The storage modulus of the treated PLLA showed about 100 times higher than that of only crosslinked PLLA. The improved materials was applied to demonstration lens of eyewear. (author)

Development of a material property database on selected ceramic matrix composite materials

Science.gov (United States)

Mahanta, Kamala

1996-01-01

Ceramic Matrix Composites, with fiber/whisker/particulate reinforcement, possess the attractive properties of ceramics such as high melting temperature, high strength and stiffness at high temperature, low density, excellent environmental resistance, combined with improved toughness and mechanical reliability. These unique properties have made these composites an enabling technology for thermomechanically demanding applications in high temperature, high stress and aggressive environments. On a broader scale, CMC's are anticipated to be applicable in aircraft propulsion, space propulsion, power and structures, in addition to ground based applications. However, it is also true that for any serious commitment of the material toward any of the intended critical thermo-mechanical applications to materialize, vigorous research has to be conducted for a thorough understanding of the mechanical and thermal behavior of CMC's. The high technology of CMC'S is far from being mature. In view of this growing need for CMC data, researchers all over the world have found themselves drawn into the characterization of CMC's such as C/SiC, SiC/SiC, SiC/Al203, SiC/Glass, SiC/C, SiC/Blackglas. A significant amount of data has been generated by the industries, national laboratories and educational institutions in the United States of America. NASA/Marshall Space Flight Center intends to collect the 'pedigreed' CMC data and store those in a CMC database within MAPTIS (Materials and Processes Technical Information System). The task of compilation of the CMC database is a monumental one and requires efforts in various directions. The project started in the form of a summer faculty fellowship in 1994 and has spilled into the months that followed and into the summer faculty fellowship of 1995 and has the prospect of continuing into the future for a healthy growth, which of course depends to a large extent on how fast CMC data are generated. The 10-week long summer fellowship has concentrated

Hedges Used in Business Emails: A Corpus Study on the Language Strategy of International Business Communication Online

Science.gov (United States)

Yue, Siwei; Wang, Xuefei

2014-01-01

Based on a corpus of 296 authentic business emails produced in computer-mediated business communication from 7 Chinese international trade enterprises, this paper addresses the language strategy applied in CMC (Computer-mediated Communication) by examining the use of hedges. With the emergence of internet, a wider range of hedges are applied…

The role of emotion in computer-mediated communication: A review

NARCIS (Netherlands)

Derks, D.; Fischer, A.H.; Bos, A.E.R.

2008-01-01

It has been argued that the communication of emotions is more difficult in computer-mediated communication (CMC) than in face-to-face (F2F) communication. The aim of this paper is to review the empirical evidence in order to gain insight in whether emotions are communicated differently in these

Rubrics and Exemplars in Text-Conferencing

Science.gov (United States)

Zahara, Allan

2005-01-01

The author draws on his K-12 teaching experiences in analyzing the strengths and weaknesses of asynchronous, text-based conferencing in online education. Issues relating to Web-based versus client-driven systems in computer-mediated conferencing (CMC) are examined. The paper also discusses pedagogical and administrative implications of choosing a…

Thumb carpometacarpal joint congruence during functional tasks and thumb range-of-motion activities

Science.gov (United States)

Halilaj, Eni; Moore, Douglas C; Patel, Tarpit K; Laidlaw, David H; Ladd, Amy L; Weiss, Arnold-Peter C; Crisco, Joseph J

2017-01-01

Joint incongruity is often cited as a possible etiological factor for the high incidence of thumb carpometacarpal (CMC) joint osteoarthritis (OA) in older women. There is evidence suggesting that biomechanics plays a role in CMC OA progression, but little is known about how CMC joint congruence, specifically, differs among different cohorts. The purpose of this in vivo study was to determine if CMC joint congruence differs with sex, age, and early stage OA for different thumb positions. Using CT data from 155 subjects and a congruence metric that is based on both articular morphology and joint posture, we did not find any differences in CMC joint congruence with sex or age group, but found that patients in the early stages of OA exhibit lower congruence than healthy subjects of the same age group. PMID:25570956

Thumb carpometacarpal joint congruence during functional tasks and thumb range-of-motion activities.

Science.gov (United States)

Halilaj, Eni; Moore, Douglas C; Patel, Tarpit K; Laidlaw, David H; Ladd, Amy L; Weiss, Arnold-Peter C; Crisco, Joseph J

2014-01-01

Joint incongruity is often cited as a possible etiological factor for the high incidence of thumb carpometacarpal (CMC) joint osteoarthritis (OA) in older women. There is evidence suggesting that biomechanics plays a role in CMC OA progression, but little is known about how CMC joint congruence, specifically, differs among different cohorts. The purpose of this in vivo study was to determine if CMC joint congruence differs with sex, age, and early stage OA for different thumb positions. Using CT data from 155 subjects and a congruence metric that is based on both articular morphology and joint posture, we did not find any differences in CMC joint congruence with sex or age group, but found that patients in the early stages of OA exhibit lower congruence than healthy subjects of the same age group.

Chitosan/Carboxymethylcellulose/Ionic Liquid/Ag(0) Nanoparticles Form a Membrane with Antimicrobial Activity

International Nuclear Information System (INIS)

Quadros, C.; Faria, V.W.; Scheeren, C.W.; Klein, M.P.; Hertz, P.F.

2013-01-01

Silver metal nanoparticles were immobilized in chitosan/carboxymethylcellulose/BMI.BF4(1-n-butyl-3-methylimidazolium tetrafluoroborate ionic liquid) (CS/CMC/IL) to form polymeric membrane with 20 μm thickness. The CS/CMC/IL polymeric membrane was prepared using a simple solution blending method. Irregularly shaped Ag(0) nanoparticles with monomodal size distributions of nm Ag(0) were immobilized in the membrane. The presence of small Ag(0) nanoparticles induced an augmentation in the CS/CMC/IL film surface areas. The CS/CMC/IL membrane containing Ag(0) showed increase antimicrobial activity the Ag(0) concentration increased up to saturation at 10 mg. CS/CMC/IL membrane that contains Ag(0) nanoparticles has enhanced durability of the membrane and exhibited stronger antimicrobial activity against Escherichia coli and Staphylococcus aureus.

Printed optically transparent graphene cellulose electrodes

Science.gov (United States)

Sinar, Dogan; Knopf, George K.; Nikumb, Suwas; Andrushchenko, Anatoly

2016-02-01

Optically transparent electrodes are a key component in variety of products including bioelectronics, touch screens, flexible displays, low emissivity windows, and photovoltaic cells. Although highly conductive indium tin oxide (ITO) films are often used in these electrode applications, the raw material is very expensive and the electrodes often fracture when mechanically stressed. An alternative low-cost material for inkjet printing transparent electrodes on glass and flexible polymer substrates is described in this paper. The water based ink is created by using a hydrophilic cellulose derivative, carboxymethyl cellulose (CMC), to help suspend the naturally hydrophobic graphene (G) sheets in a solvent composed of 70% DI water and 30% 2-butoxyethanol. The CMC chain has hydrophobic and hydrophilic functional sites which allow adsorption on G sheets and, therefore, permit the graphene to be stabilized in water by electrostatic and steric forces. Once deposited on the functionalized substrate the electrical conductivity of the printed films can be "tuned" by decomposing the cellulose stabilizer using thermal reduction. The entire electrode can be thermally reduced in an oven or portions of the electrode thermally modified using a laser annealing process. The thermal process can reduce the sheet resistance of G-CMC films to < 100 Ω/sq. Experimental studies show that the optical transmittance and sheet resistance of the G-CMC conductive electrode is a dependent on the film thickness (ie. superimposed printed layers). The printed electrodes have also been doped with AuCl3 to increase electrical conductivity without significantly increasing film thickness and, thereby, maintain high optical transparency.

Smart swelling biopolymer microparticles by a microfluidic approach: synthesis, in situ encapsulation and controlled release.

Science.gov (United States)

Fang, Aiping; Cathala, Bernard

2011-01-01

This paper reports a microfluidic synthesis of biopolymer microparticles aiming at smart swelling. Monodisperse aqueous emulsion droplets comprising biopolymer and its cross-linking agent were formed in mineral oil and solidified in the winding microfluidic channels by in situ chaotic mixing, which resulted in internal chemical gelation for hydrogels. The achievement of pectin microparticles from in situ mixing pectin with its cross-linking agent, calcium ions, successfully demonstrates the reliability of this microfluidic synthesis approach. In order to achieve hydrogels with smart swelling, the following parameters and their impacts on the swelling behaviour, stability and morphology of microparticles were investigated: (1) the type of biopolymers (alginate or mixture of alginate and carboxymethylcellulose, A-CMC); (2) rapid mixing; (3) concentration and type of cross-linking agent. Superabsorbent microparticles were obtained from A-CMC mixture by using ferric chloride as an additional external cross-linking agent. The in situ encapsulation of a model protein, bovine serum albumin (BSA), was also carried out. As a potential protein drug-delivery system, the BSA release behaviours of the biopolymer particles were studied in simulated gastric and intestinal fluids. Compared with alginate and A-CMC microparticles cross-linked with calcium ions, A-CMC microparticles cross-linked with both calcium and ferric ions demonstrate a significantly delayed release. The controllable release profile, the facile encapsulation as well as their biocompatibility, biodegradability, mucoadhesiveness render this microfluidic approach promising in achieving biopolymer microparticles as protein drug carrier for site-specific release. Copyright © 2010 Elsevier B.V. All rights reserved.

Rapid fabrication of TiO2@carboxymethyl cellulose coatings capable of shielding UV, antifog and delaying support aging.

Science.gov (United States)

Li, Xiaozhou; Lv, Junping; Li, Dehuai; Wang, Lin

2017-08-01

Agricultural plastic films capable of shielding UV, filtering visible light and antifog are important to prolong their life and protect safeties of agriculturists and crops. In this work, high stable and small size TiO 2 @polymer nanoparticles (NPs) were prepared by an efficient one-pot microwave synthesis using titanic sulfate as Ti resource, carboxymethyl cellulose sodium (CMC) as complexing agent and stabilizer. The TiO 2 @CMC NPs obtained were then utilized to fabricate poly(ethylene imine) (PEI)/TiO 2 @CMC coatings on the surface of polypropylene films by a layer-by-layer assembly technique. The TiO 2 @CMC NPs show rapid deposition rate because small, spherical and anion-rich TiO 2 @CMC NPs possess large specific surface area and fast diffusion rate. More importantly, property experiments confirm that (PEI/TiO 2 @CMC)*15 coatings can not only effectively shield UV rays, filter visible light and prevent fogging but also delay the aging of their supports. Copyright © 2017 Elsevier Ltd. All rights reserved.

[Computer mediated discussion and attitude polarization].

Science.gov (United States)

Shiraishi, Takashi; Endo, Kimihisa; Yoshida, Fujio

2002-10-01

This study examined the hypothesis that computer mediated discussions lead to more extreme decisions than face-to-face (FTF) meeting. Kiesler, Siegel, & McGuire (1984) claimed that computer mediated communication (CMC) tended to be relatively uninhibited, as seen in 'flaming', and that group decisions under CMC using Choice Dilemma Questionnaire tended to be more extreme and riskier than FTF meetings. However, for the same reason, CMC discussions on controversial social issues for which participants initially hold strongly opposing views, might be less likely to reach a consensus, and no polarization should occur. Fifteen 4-member groups discussed a controversial social issue under one of three conditions: FTF, CMC, and partition. After discussion, participants rated their position as a group on a 9-point bipolar scale ranging from strong disagreement to strong agreement. A stronger polarization effect was observed for FTF groups than those where members were separated with partitions. However, no extreme shift from their original, individual positions was found for CMC participants. There results were discussed in terms of 'expertise and status equalization' and 'absence of social context cues' under CMC.

Ultrasound-accelerated synthesis of biphenyl compounds using novel Pd(0) nanoparticles immobilized on bio-composite.

Science.gov (United States)

Baran, Talat

2018-07-01

This study describes (i) an eco-friendly approach for design of Pd(0) nanoparticles on a natural composite, which is composed of carboxymethyl cellulose/agar polysaccharides (CMC/AG), without using any toxic reducing agents and (ii) development of ultrasound assisted simple protocol for synthesis of biphenyl compounds. Chemical characterization studies of Pd(0) nanoparticles (Pd NPs@CMC/AG) revealed that size of the particles were in the range of 37-55 nm. Catalytic performance of Pd NPs@CMC/AG was evaluated in synthesis of various biphenyl compounds by using the ultrasound-assisted method that was developed in this study. Pd NPs@CMC/AG exhibited excellent catalytic performance by producing high reaction yields. In addition, Pd NPs@CMC/AG was successfully used up to six reaction cycles without losing its catalytic activity, indicating high reproducibility of Pd NPs@CMC/AG. Additionally, compared to conventional the methods, new ultrasound-assisted synthesis technique that was followed in this study exhibited some advantages such as shorter reaction time, greener reaction conditions, higher yields and easier work-up. Copyright © 2018 Elsevier B.V. All rights reserved.

Biodegradation behaviors and water adsorption of poly(vinyl alcohol)/starch/carboxymethyl cellulose/clay nanocomposites

Science.gov (United States)

Taghizadeh, Mohammad Taghi; Sabouri, Narges

2013-09-01

The focus of this work is to study the effect of sodium montmorillonite (MMT-Na) clay content on the rate and extent of enzymatic hydrolysis polyvinyl alcohol (PVA)/starch (S)/carboxymethyl cellulose (CMC) blends using enzyme cellulase. The rate of glucose production from each nanocomposite substrates was most rapid for the substrate without MMT-Na and decreased with the addition of MMT-Na for PVA/S/CMC blend (51.5 μg/ml h), PVA/S/CMC/1% MMT (45.4 μg/ml h), PVA/S/CMC/3% MMT (42.8 μg/ml h), and PVA/S/CMC/5% MMT (39.2 μg/ml h). The results of this study have revealed that films with MMT-Na content at 5 wt.% exhibited a significantly reduced rate and extent of hydrolysis. Enzymatic degradation behavior of MMT-Na containing nanocomposites of PVA/S/CMC was based on the determinations of weight loss and the reducing sugars. The degraded residues have been characterized by various analytical techniques, such as Fourier transform infrared spectroscopy, scanning electronic microscopy, and UV-vis spectroscopy.

Bone marrow-derived cultured mast cells and peritoneal mast cells as targets of a growth activity secreted by BALB/3T3 fibroblasts

International Nuclear Information System (INIS)

Jozaki, K.; Kuriu, A.; Hirota, S.; Onoue, H.; Ebi, Y.; Adachi, S.; Ma, J.Y.; Tarui, S.; Kitamura, Y.

1991-01-01

When fibroblast cell lines were cultured in contact with bone marrow-derived cultured mast cells (CMC), both NIH/3T3 and BALB/3T3 cell lines supported the proliferation of CMC. In contrast, when contact between fibroblasts and CMC was prohibited by Biopore membranes or soft agar, only BALB/3T3 fibroblasts supported CMC proliferation, suggesting that BALB/3T3 but not NIH/3T3 cells secreted a significant amount of a mast cell growth activity. Moreover, the BALB/3T3-derived growth activity induced the incorporation of [3H]thymidine by CMC and the clonal growth of peritoneal mast cells in methylcellulose. The mast cell growth activity appeared to be different from interleukin 3 (IL-3) and interleukin 4 (IL-4), because mRNAs for these interleukins were not detectable in BALB/3T3 fibroblasts. Although mast cells are genetically deficient in tissues of W/Wv mice, CMC did develop when bone marrow cells of W/Wv mice were cultured with pokeweed mitogen-stimulated spleen cell-conditioned medium. Because BALB/3T3 fibroblast-conditioned medium (BALB-FCM) did not induce the incorporation of [3H]thymidine by W/Wv CMC, the growth activity in BALB-FCM appeared to be a ligand for the receptor encoded by the W (c-kit) locus. Because CMC and peritoneal mast cells are obtained as homogeneous suspensions rather easily, these cells may be potentially useful as targets for the fibroblast-derived mast cell growth activity

Using an Online Collaborative Project between American and Chinese Students to Develop ESL Teaching Skills, Cross-Cultural Awareness and Language Skills

Science.gov (United States)

Angelova, Maria; Zhao, Ying

2016-01-01

The purpose of this study was to explore the potential of computer-mediated communication (CMC) tools to facilitate second language acquisition and develop English as a second language (ESL) teaching skills and cultural awareness. The paper describes a collaborative online project between students from China and the USA, who communicated using the…

Designing Learning Resources in Synchronous Learning Environments

DEFF Research Database (Denmark)

Christiansen, Rene B

2015-01-01

Computer-mediated Communication (CMC) and synchronous learning environments offer new solutions for teachers and students that transcend the singular one-way transmission of content knowledge from teacher to student. CMC makes it possible not only to teach computer mediated but also to design...... and create new learning resources targeted to a specific group of learners. This paper addresses the possibilities of designing learning resources within synchronous learning environments. The empirical basis is a cross-country study involving students and teachers in primary schools in three Nordic...... Countries (Denmark, Sweden and Norway). On the basis of these empirical studies a set of design examples is drawn with the purpose of showing how the design fulfills the dual purpose of functioning as a remote, synchronous learning environment and - using the learning materials used and recordings...

HUMIC ACID-LIKE MATTER ISOLATED FROM GREEN URBAN WASTES. PART I: STRUCTURE AND SURFACTANT PROPERTIES

Directory of Open Access Journals (Sweden)

Enzo Montoneri

2008-02-01

Full Text Available A humic acid-like substance (cHAL2 isolated from urban green wastes before composting was compared to a humic acid-like substance (cHAL isolated from a mix of urban organic humid waste fraction and green residues composted for 15 days. cHAL2 was found to contain more aliphatic and O-alkyl C atoms relative to aromatic, phenol, and carboxyl C atoms, and to yield higher critical micellar concentration (cmc = 0.97 g L-1 and surface tension at the cmc (cmc = 37.8 mN/min water than cHAL (cmc = 0.40 g L-1; cmc = 36.1 mN/m. The results point out that biomass wastes may be an interesting source of biosurfactants with diversified properties that depend on the nature of waste and on its process of treatment.

Gamma radiation synthesis of super absorbent hydrogels for different applications

International Nuclear Information System (INIS)

Marzouk, H.M.G.

2015-01-01

Super absorbent polymers (SAP) of carboxymethyl cellulose/acrylamide (CMC/PAM), carboxymethyl cellulose/acrylamide/Silica (CMC/AM/Si) and carboxymethyl cellulose/Polyvinyl alcohol (CMC/PVA) were synthesized by radiation-induced grafting using γ-irradiation technique. The effects of various parameters, such as irradiation dose, the content of CMC, PAM, PVA, and Silica gel on the swelling percent of produced hydrogels have been evaluated. The kinetic equilibrium swelling of the prepared copolymer hydrogels was studied, it was found that the maximum swelling percent was 5000 % for the CMC/PAM hydrogel, 12000 % for the CMC/PAM/Si composite hydrogel, and 6200 % for the CMC/PVA hydrogel. The gel fraction, equilibrium swelling and effect of ph on the swelling percent were also studied. The prepared copolymers were also characterized by FTIR spectral analysis, thermo gravimetric analysis (TGA), and scanning electron microscopy (SEM) techniques. In order to evaluate its controlled release potential, different prepared hydrogels were loaded with KNO 3 as an agrochemical model and its potential for controlled release of KNO 3 was studied and evaluated with respect to different parameters such as time of release, ph of the medium, and temperatures. The results obtained from swelling, loading of KNO 3 , and release behavior studies suggested and recommended the possible use of prepared hydrogels for enhancing the plantation of Linum Usitatissimum.

Effect of carboxymethylcellulose on potassium bitartrate crystallization on model solution and white wine

Science.gov (United States)

Bajul, Audrey; Gerbaud, Vincent; Teychene, Sébastien; Devatine, Audrey; Bajul, Gilles

2017-08-01

Instability in bottled wines refer to tartaric salts crystallization such as potassium bitartrate (KHT). It is not desirable as consumers see the settled salts as an evidence of a poor quality control. In some cases, it causes excessive gushing in sparkling wine. We investigate the effect of two oenological carboxymethylcellulose (CMC) for KHT inhibition in a model solution of white wine by studying the impact of some properties of CMC such as the degree of polymerization, the degree of substitution, and the apparent dissociation constant determined by potentiometric titration. Polyelectrolyte adsorption is used for determining the surface and total charge and for providing information about the availability of CMC charged groups for interacting with KHT crystal faces. The inhibitory efficiency of CMC on model solution is evaluated by measuring the induction time with the help of conductimetric methods. Crystals growth with and without CMC are studied by observation with MEB and by thermal analysis using DSC. The results confirm the effectiveness of CMC as an inhibitor of KHT crystallization in a model solution. The main hypothesis of the mechanism lies in the interaction of dissociated anionic carboxymethyl groups along the cellulose backbone with positively charged layers on KHT faces like the {0 1 0} face. Key factors such as pH, CMC chain length and total charge are discusses.

Nasal Absorption of Macromolecules from Powder Formulations and Effects of Sodium Carboxymethyl Cellulose on Their Absorption.

Directory of Open Access Journals (Sweden)

Akiko Tanaka

Full Text Available The nasal absorption of macromolecules from powder formulations and the effect of sodium carboxymethyl cellulose (CMC-Na as a pharmaceutical excipient on their absorption were studied. Model macromolecules were fluorescein isothiocyanate-labeled dextran (average molecular weight of 4.4kDa, FD4 and insulin. The plasma concentration of FD4 after application of the powder containing 50% starch (control was higher than that after application of the solution, and the absorption from 50% starch powder was enhanced by the substitution of starch with CMC-Na. The fractional absorption of FD4 after administration of the CMC-Na powder formulation was 30% and 40% higher than that after administration from the solution and the starch powder, respectively. The nasal absorption of insulin from the powder and the effect of CMC-Na were similar with those of FD4. The effective absorption of FD4 and insulin after application of powder with CMC-Na could be due to the increase in the nasal residence of FD4 and insulin. No damage in the nasal mucosa or dysfunction of the mucociliary clearance was observed after application of the drug powder and CMC-Na. The present findings indicate that nasal delivery of powder formulations with the addition of CMC-Na as an excipient is a promising approach for improving the nasal absorption of macromolecules.

Inhibitory effect of cellulose fibers on the formation of heterocyclic aromatic amines in grilled beef patties.

Science.gov (United States)

Gibis, Monika; Weiss, Jochen

2017-08-15

Microcrystalline cellulose (MCC) or carboxymethyl cellulose (CMC) can be used as fat replacers; both are nondigestible fibers. As water-holding compounds, the impact of added CMC or MCC was studied concerning the formation of heterocyclic amines (HAAs). Low-fat patties with 0.5-3% MCC/CMC were prepared using 90% of beef and 10% of an aqueous fiber dispersion and were determined for HAA-levels after grilling. The HAAs in patties containing CMC(MCC) were found in the following concentrations; MeIQx (2-Amino-3,8-dimethylimidazo[4,5-f]quinoxaline) 0.6-2.7 (0.9-3.3)ng/g, 4,8-DiMeIQx (2-Amino-3,4,8-trimethylimidazo[4,5-f]quinoxaline) n.d.-1.5 (n.d.-2.2)ng/g and PhIP (2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine) 0.03-0.3 (0.06-0.2)ng/g. The patties clearly contained lower HAA-levels with increasing addition of CMC or MCC. A continuous increase of the concentrations of comutagenic harman was observed (CMC: 1.2-13.2; MCC: 5.2-11.4ng/g) for increasing levels of fibers and a slight decrease of the content of norharman for MCC (0.5-1.6ng/g). No clear tendency was found for norharman using CMC (0.3-1.1ng/g). Copyright © 2017 Elsevier Ltd. All rights reserved.

Exploring Paper.

Science.gov (United States)

Brand, Judith, Ed.

1999-01-01

Exploratorium Magazine communicates ideas that exhibits cannot easily demonstrate, extending the museum beyond its physical walls. This issue takes an in-depth look at the science and history of paper. Topics include: (1) Fascinating Facts about Paper; (2) A Closer Look at the Paper in This Magazine; (3) Handmade Paper; (4) Paper Airplanes; (5)…

Study of the electrochemical behavior at low temperatures of green anodes for Lithium ion batteries prepared with anatase TiO2 and water soluble sodium carboxymethyl cellulose binder

International Nuclear Information System (INIS)

Mancini, M.; Nobili, F.; Tossici, R.; Marassi, R.

2012-01-01

Highlights: ► Water soluble CMC and PVDF binders are used to prepare anatase TiO 2 electrodes. ► The electrochemical behavior of the different electrodes is studied between 20 and −30 °C. ► CMC/TiO 2 anodes show lower ICL, lower polarization and higher low-temperature capacity at high rates than PVDF/TiO 2 anodes. ► Electrochemical Impedance Spectroscopy results show better kinetics for CMC/TiO 2 electrodes. - Abstract: The electrochemical behavior at low temperatures of anatase TiO 2 electrodes for Lithium ion batteries have been evaluated by galvanostatic cycles in the temperature range 20 to −30 °C. Two different manufacturing processes have been used to prepare anatase anodes containing water soluble sodium carboxymethyl cellulose (CMC) or poly(vinilydene fluoride) (PVDF) as binder. The low temperature performances at different charge/discharge rates of TiO 2 /CMC and TiO 2 /PVDF electrodes are compared and discussed in terms of irreversible capacity loss (ICL) at the first cycle, capacity retention and reversible capacity. The kinetics of the electrodes containing CMC or PVDF is evaluated by Electrochemical Impedance Spectroscopy.

Paper electronics.

Science.gov (United States)

Tobjörk, Daniel; Österbacka, Ronald

2011-05-03

Paper is ubiquitous in everyday life and a truly low-cost substrate. The use of paper substrates could be extended even further, if electronic applications would be applied next to or below the printed graphics. However, applying electronics on paper is challenging. The paper surface is not only very rough compared to plastics, but is also porous. While this is detrimental for most electronic devices manufactured directly onto paper substrates, there are also approaches that are compatible with the rough and absorptive paper surface. In this review, recent advances and possibilities of these approaches are evaluated and the limitations of paper electronics are discussed. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Comparison of measurement capability with 100 μmol/mol of carbon monoxide in nitrogen

Science.gov (United States)

Lee, Jeongsoon; Lee, JinBok; Lim, Jeongsik; Tarhan, Tanıl; Liu, Hsin-Wang; Aggarwal, Shankar G.

2018-01-01

Carbon monoxide (CO) in nitrogen was one of the first types of gas mixtures used in an international key comparison. The comparison dates back to 1998 (CCQMK1a) [1]. Since then, many National Metrology Institutes (NMIs) have developed calibration and measurement capabilities (CMCs) for these mixtures. Recently, NMIs in the APMP region have actively participated in international comparisons to provide domestic services. At the 2013 APMP meeting, several NMIs requested a CO comparison to establish CO/N2 certification for industrial applications, which was to be coordinated by KRISS. Consequently, this comparison provides an opportunity for APMP regional NMIs to develop CO/N2 CMC claims. The goal of this supplementary comparison is to support CMC claim for carbon monoxide in the N2 range of 50–2000 μmol/mol. An extended range may be supported as described in the GAWG strategy for comparisons and CMC claims. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Corticomuscular synchronization with small and large dynamic force output

Science.gov (United States)

Andrykiewicz, Agnieszka; Patino, Luis; Naranjo, Jose Raul; Witte, Matthias; Hepp-Reymond, Marie-Claude; Kristeva, Rumyana

2007-01-01

Background Over the last few years much research has been devoted to investigating the synchronization between cortical motor and muscular activity as measured by EEG/MEG-EMG coherence. The main focus so far has been on corticomuscular coherence (CMC) during static force condition, for which coherence in beta-range has been described. In contrast, we showed in a recent study [1] that dynamic force condition is accompanied by gamma-range CMC. The modulation of the CMC by various dynamic force amplitudes, however, remained uninvestigated. The present study addresses this question. We examined eight healthy human subjects. EEG and surface EMG were recorded simultaneously. The visuomotor task consisted in isometric compensation for 3 forces (static, small and large dynamic) generated by a manipulandum. The CMC, the cortical EEG spectral power (SP), the EMG SP and the errors in motor performance (as the difference between target and exerted force) were analyzed. Results For the static force condition we found the well-documented, significant beta-range CMC (15–30 Hz) over the contralateral sensorimotor cortex. Gamma-band CMC (30–45 Hz) occurred in both small and large dynamic force conditions without any significant difference between both conditions. Although in some subjects beta-range CMC was observed during both dynamic force conditions no significant difference between conditions could be detected. With respect to the motor performance, the lowest errors were obtained in the static force condition and the highest ones in the dynamic condition with large amplitude. However, when we normalized the magnitude of the errors to the amplitude of the applied force (relative errors) no significant difference between both dynamic conditions was observed. Conclusion These findings confirm that during dynamic force output the corticomuscular network oscillates at gamma frequencies. Moreover, we show that amplitude modulation of dynamic force has no effect on the gamma CMC

Corticomuscular synchronization with small and large dynamic force output

Directory of Open Access Journals (Sweden)

Witte Matthias

2007-11-01

Full Text Available Abstract Background Over the last few years much research has been devoted to investigating the synchronization between cortical motor and muscular activity as measured by EEG/MEG-EMG coherence. The main focus so far has been on corticomuscular coherence (CMC during static force condition, for which coherence in beta-range has been described. In contrast, we showed in a recent study 1 that dynamic force condition is accompanied by gamma-range CMC. The modulation of the CMC by various dynamic force amplitudes, however, remained uninvestigated. The present study addresses this question. We examined eight healthy human subjects. EEG and surface EMG were recorded simultaneously. The visuomotor task consisted in isometric compensation for 3 forces (static, small and large dynamic generated by a manipulandum. The CMC, the cortical EEG spectral power (SP, the EMG SP and the errors in motor performance (as the difference between target and exerted force were analyzed. Results For the static force condition we found the well-documented, significant beta-range CMC (15–30 Hz over the contralateral sensorimotor cortex. Gamma-band CMC (30–45 Hz occurred in both small and large dynamic force conditions without any significant difference between both conditions. Although in some subjects beta-range CMC was observed during both dynamic force conditions no significant difference between conditions could be detected. With respect to the motor performance, the lowest errors were obtained in the static force condition and the highest ones in the dynamic condition with large amplitude. However, when we normalized the magnitude of the errors to the amplitude of the applied force (relative errors no significant difference between both dynamic conditions was observed. Conclusion These findings confirm that during dynamic force output the corticomuscular network oscillates at gamma frequencies. Moreover, we show that amplitude modulation of dynamic force has no

Plasticity of premotor cortico-muscular coherence in severely impaired stroke patients with hand paralysis.

Science.gov (United States)

Belardinelli, Paolo; Laer, Leonard; Ortiz, Erick; Braun, Christoph; Gharabaghi, Alireza

2017-01-01

Motor recovery in severely impaired stroke patients is often very limited. To refine therapeutic interventions for regaining motor control in this patient group, the functionally relevant mechanisms of neuronal plasticity need to be detected. Cortico-muscular coherence (CMC) may provide physiological and topographic insights to achieve this goal. Synchronizing limb movements to motor-related brain activation is hypothesized to reestablish cortico-motor control indexed by CMC. In the present study, right-handed, chronic stroke patients with right-hemispheric lesions and left hand paralysis participated in a four-week training for their left upper extremity. A brain-robot interface turned event-related beta-band desynchronization of the lesioned sensorimotor cortex during kinesthetic motor-imagery into the opening of the paralyzed hand by a robotic orthosis. Simultaneous MEG/EMG recordings and individual models from MRIs were used for CMC detection and source reconstruction of cortico-muscular connectivity to the affected finger extensors before and after the training program. The upper extremity-FMA of the patients improved significantly from 16.23 ± 6.79 to 19.52 ± 7.91 (p = 0.0015). All patients showed significantly increased CMC in the beta frequency-band, with a distributed, bi-hemispheric pattern and considerable inter-individual variability. The location of CMC changes was not correlated to the severity of the motor impairment, the motor improvement or the lesion volume. Group analysis of the cortical overlap revealed a common feature in all patients following the intervention: a significantly increased level of ipsilesional premotor CMC that extended from the superior to the middle and inferior frontal gyrus, along with a confined area of increased CMC in the contralesional premotor cortex. In conclusion, functionally relevant modulations of CMC can be detected in patients with long-term, severe motor deficits after a brain-robot assisted

Development and evaluation of controlled-release buccoadhesive verapamil hydrochloride tablets

Directory of Open Access Journals (Sweden)

Emami J.

2008-05-01

Full Text Available Background and purpose of the study: Verapamil hydrochloride is a calcium channel blocker which is used in the control of supraventricular arrhythmia, hypertension and myocardial infraction. There are considerable inter-individual variations in serum concencentration of verpamil due to variation in the extent of hepatic metabolism. In this study controlled-release buccoadhesive tablets of verapamil hydrochloride (VPH were prepared in order to achieve constant plasma concentrations, to improve the bioavailability by the avoidance of hepatic first-pass metabolism, and to prevent frequent administration. Materials and methods: Tablets containing fixed amount of VPH were prepared by direct compression method using polymers like carbomer (CP, hydroxypropylmethyl cellulose (HPMC and sodium carboxymethyl cellulose (NaCMC in various combination and ratios and evaluated for thickness, weight variation, hardness, drug content uniformity, swelling, mucoadhesive strength, drug release and possible interaction between ingredients. Results: All tablets were acceptable with regard to thickness, weight variation, hardness, and drug content. The maximum bioadhesive strength was observed in tablets formulated with a combination of CP-NaCMC followed by CP-HPMC and NaCMC-HPMC.  Decreasing the content of CP in CP-HPMC tablets or NaCMC in CP-NaCMC or NaCMC-HPMC systems resulted in decrease in detachment forces. Lower release rates were observed by lowering the content of CP in CP-HPMC containing formulations or NaCMC in tablets which contained CP-NaCMC or NaCMC-HPMC. The release behavior was non-Fickian controlled by a combination of diffusion and chain relaxation mechanisms and best fitted zero-order kinetics. Conclusion: The buccoadhesive VPH tablets containing 53% CP and 13.3% HPMC showed suitable release kinetics (n = 0.78, K0 zero order release = 4.11 mg/h, MDT = 5.66 h and adhesive properties and did not show any interaction between polymers and drug based on

Ecotoxicological characterization of polyoxyethylene glycerol ester non-ionic surfactants and their mixtures with anionic and non-ionic surfactants.

Science.gov (United States)

Ríos, Francisco; Fernández-Arteaga, Alejandro; Lechuga, Manuela; Fernández-Serrano, Mercedes

2017-04-01

This paper reports on a study that investigated the aquatic toxicity of new non-ionic surfactants derived from renewable raw materials, polyoxyethylene glycerol ester (PGE), and their binary mixtures with anionic and non-ionic surfactants. Toxicity of pure PGEs was determined using representative organisms from different trophic levels: luminescent bacteria (Vibrio fischeri), microalgae (Pseudokirchneriella subcapitata), and freshwater crustaceans (Daphnia magna). Relationships between toxicity and the structural parameters such as unit of ethylene oxide (EO) and hydrophilic-lipophilic balance (HLB) were evaluated. Critical micellar concentration (CMC) in the conditions of the toxicity test was also determined. It was found that the toxicity of the aqueous solutions of PGE decreased when the number of EO units in the molecule, HLB, and CMC increased. PGEs showed lower CMC in marine medium, and the toxicity to V. ficheri is lower when the CMC was higher. Given their non-polar nature, narcosis was expected to be the primary mode of toxic action of PGEs. For the mixture of surfactants, we observed that the mixtures with PGE that had the higher numbers of EO units were more toxic than the aqueous solutions of pure surfactants. Moreover, we found that concentration addition was the type of action more likely to occur for mixtures of PGE with lower numbers of EO units with non-ionic surfactants (alkylpolyglucoside and fatty alcohol ethoxylate), whereas for the mixture of PGE with lower EO units and anionic surfactant (ether carboxylic derivative), the most common response type was response addition. In case of mixtures involving amphoteric surfactants and PGEs with the higher numbers of EO units, no clear pattern with regard to the mixture toxicity response type could be observed.

Fitness consequences of occasional outcrossing in a functionally asexual plant (Oenothera biennis).

Science.gov (United States)

Maron, John L; Johnson, Marc T J; Hastings, Amy P; Agrawal, Anurag A

2018-02-01

Many clonal organisms occasionally outcross, but the long-term consequences of such infrequent events are often unknown. During five years, representing three to five plant generations, we followed 16 experimental field populations of the forb, Oenothera biennis, originally planted with the same 18 original genotypes. Oenothera biennis usually self fertilizes, which, due to its genetic system (permanent translocation heterozygosity), results in seeds that are clones of the maternal plant. However, rare outcrossing produces genetically novel offspring (but without recombination or increased heterozygosity). We sought to understand whether novel genotypes produced through natural outcrossing had greater fecundity or different multigenerational dynamics compared to our original genotypes. We further assessed whether any differences in fitness or abundances through time between original and novel genotypes were exaggerated in the presence vs. absence of insect herbivores. Over the course of the experiment, we genotyped >12,500 plants using microsatellite DNA markers to identify and track the frequency of specific genotypes and estimated fecundity on a subset (>3,000) of plants. The effective outcrossing rate was 7.3% in the first year and ultimately 50% of the plants were of outcrossed origin by the final year of the experiment. Lifetime fruit production per plant was on average 32% higher across all novel genotypes produced via outcrossing compared to the original genotypes, and this fecundity advantage was significantly enhanced in populations lacking herbivores. Among 43 novel genotypes that were abundant enough to phenotype with replication, plants produced nearly 30% more fruits than the average of their specific two parental genotypes, and marginally more fruits (8%) than their most fecund parent. Mean per capita fecundity of novel genotypes predicted their relative frequencies at the end of the experiment. Novel genotypes increased more dramatically in

Managing Discourse in Intercultural Business Email Interactions: A Case Study of a British and Italian Business Transaction

Science.gov (United States)

Incelli, Ersilia

2013-01-01

This paper investigates native speaker (NS) and non-native speaker (NNS) interaction in the workplace in computer-mediated communication (CMC). Based on empirical data from a 10-month email exchange between a medium-sized British company and a small-sized Italian company, the general aim of this study is to explore the nature of the intercultural…

Ceramic composites: Enabling aerospace materials

Science.gov (United States)

Levine, S. R.

1992-01-01

Ceramics and ceramic matrix composites (CMC) have the potential for significant impact on the performance of aerospace propulsion and power systems. In this paper, the potential benefits are discussed in broad qualitative terms and are illustrated by some specific application case studies. The key issues in need of resolution for the potential of ceramics to be realized are discussed.

On the Problem of Determining Aggregation Numbers from Surface Tension Measurements.

Science.gov (United States)

Rusanov, Anatoly I

2017-11-07

In view of the recent discovery of variable aggregation numbers in the vicinity of the critical micelle concentration (CMC), the mass-action-law theory of the surface tension isotherm of a micellar solution with variable aggregation numbers is formulated both for nonionic and ionic surfactants. It is shown that the shape of the surface tension isotherm should be concave in the logarithmic scale above the CMC. Considering a change in the isotherm slope at the CMC apparent break point, the problems of determining the aggregation number for nonionic micelles and the degree of counterion binding for ionic micelles are discussed. In case of the aggregation number variability near the CMC, finding the aggregation number above the CMC apparent break point is considered and a computational scheme is elaborated, requiring a higher precision for experiment. Some experimental data from the literature are analyzed, and the method of estimating the degree of counterion binding is improved.

Determine equilibrium dissociation constant of drug-membrane receptor affinity using the cell membrane chromatography relative standard method.

Science.gov (United States)

Ma, Weina; Yang, Liu; Lv, Yanni; Fu, Jia; Zhang, Yanmin; He, Langchong

2017-06-23

The equilibrium dissociation constant (K D ) of drug-membrane receptor affinity is the basic parameter that reflects the strength of interaction. The cell membrane chromatography (CMC) method is an effective technique to study the characteristics of drug-membrane receptor affinity. In this study, the K D value of CMC relative standard method for the determination of drug-membrane receptor affinity was established to analyze the relative K D values of drugs binding to the membrane receptors (Epidermal growth factor receptor and angiotensin II receptor). The K D values obtained by the CMC relative standard method had a strong correlation with those obtained by the frontal analysis method. Additionally, the K D values obtained by CMC relative standard method correlated with pharmacological activity of the drug being evaluated. The CMC relative standard method is a convenient and effective method to evaluate drug-membrane receptor affinity. Copyright © 2017 Elsevier B.V. All rights reserved.

CMCpy: Genetic Code-Message Coevolution Models in Python

Science.gov (United States)

Becich, Peter J.; Stark, Brian P.; Bhat, Harish S.; Ardell, David H.

2013-01-01

Code-message coevolution (CMC) models represent coevolution of a genetic code and a population of protein-coding genes (“messages”). Formally, CMC models are sets of quasispecies coupled together for fitness through a shared genetic code. Although CMC models display plausible explanations for the origin of multiple genetic code traits by natural selection, useful modern implementations of CMC models are not currently available. To meet this need we present CMCpy, an object-oriented Python API and command-line executable front-end that can reproduce all published results of CMC models. CMCpy implements multiple solvers for leading eigenpairs of quasispecies models. We also present novel analytical results that extend and generalize applications of perturbation theory to quasispecies models and pioneer the application of a homotopy method for quasispecies with non-unique maximally fit genotypes. Our results therefore facilitate the computational and analytical study of a variety of evolutionary systems. CMCpy is free open-source software available from http://pypi.python.org/pypi/CMCpy/. PMID:23532367

Silver/polysaccharide-based nanofibrous materials synthesized from green chemistry approach.

Science.gov (United States)

Martínez-Rodríguez, M A; Garza-Navarro, M A; Moreno-Cortez, I E; Lucio-Porto, R; González-González, V A

2016-01-20

In this contribution a novel green chemistry approach for the synthesis of nanofibrous materials based on blends of carboxymethyl-cellulose (CMC)-silver nanoparticles (AgNPs) composite and polyvinyl-alcohol (PVA) is proposed. These nanofibrous materials were obtained from the electrospinning of blends of aqueous solutions of CMC-AgNPs composite and PVA, which were prepared at different CMC/PVA weight ratios in order to electrospin nanofibers applying a constant tension of 15kV. The synthesized materials were characterized by means of transmission electron microscopy, scanning electron microscopy; as well as Fourier-transform infrared, ultraviolet and Raman spectroscopic techniques. Experimental evidence suggests that the diameter of the nanofibers is thinner than any other reported in the literature regarding the electrospinning of CMC. This feature is related to the interactions of AgNPs with carboxyl functional groups of the CMC, which diminish those between the later and acetyl groups of PVA. Copyright © 2015 Elsevier Ltd. All rights reserved.

Two faces of anonymity : Paradoxical effects of cues to identity in CMC

NARCIS (Netherlands)

Tanis, M; Postmes, T.

This paper presents two experimental studies investigating the effects of presenting cues that provide information about the interactors - called cues to identity - in computer mediated communications (CMCs). Study I shows that even though cues to identity affected interpersonal evaluations, in

Two faces of anonymity: Paradoxical effects of cues to identity in CMC

NARCIS (Netherlands)

Tanis, M.A.; Postmes, T.

2007-01-01

This paper presents two experimental studies investigating the effects of presenting cues that provide information about the interactors - called cues to identity - in computer mediated communications (CMCs). Study 1 shows that even though cues to identity affected interpersonal evaluations, in

Nondestructive Damage Evaluation in Ceramic Matrix Composites for Aerospace Applications

Directory of Open Access Journals (Sweden)

Konstantinos G. Dassios

2013-01-01

Full Text Available Infrared thermography (IRT and acoustic emission (AE are the two major nondestructive methodologies for evaluating damage in ceramic matrix composites (CMCs for aerospace applications. The two techniques are applied herein to assess and monitor damage formation and evolution in a SiC-fiber reinforced CMC loaded under cyclic and fatigue loading. The paper explains how IRT and AE can be used for the assessment of the material’s performance under fatigue. IRT and AE parameters are specifically used for the characterization of the complex damage mechanisms that occur during CMC fracture, and they enable the identification of the micromechanical processes that control material failure, mainly crack formation and propagation. Additionally, these nondestructive parameters help in early prediction of the residual life of the material and in establishing the fatigue limit of materials rapidly and accurately.

Development Status and Performance Comparisons of Environmental Barrier Coating Systems for SiCSiC Ceramic Matrix Composites

Science.gov (United States)

Zhu, Dongming; Harder, Bryan

2016-01-01

Environmental barrier coatings (EBC) and SiCSiC ceramic matrix composites (CMCs) will play a crucial role in future aircraft turbine engine systems, because of their ability to significantly increase engine operating temperatures, reduce engine weight and cooling requirements. This paper presents current NASA EBC-CMC development emphases including: the coating composition and processing improvements, laser high heat flux-thermal gradient thermo-mechanical fatigue - environmental testing methodology development, and property evaluations for next generation EBC-CMC systems. EBCs processed with various deposition techniques including Plasma Spray, Electron Beam - Physical Vapor Deposition, and Plasma Spray Physical Vapor Deposition (PS-PVD) will be particularly discussed. The testing results and demonstrations of advanced EBCs-CMCs in complex simulated engine thermal gradient cyclic fatigue, oxidizing-steam and CMAS environments will help provide insights into the coating development strategies to meet long-term engine component durability goals.

Breaking Out of the Circle: Rethinking Our Assumptions about Education and the Economy. Occasional Paper No. 2.

Science.gov (United States)

Berryman, Sue E.

The National Center on Education and Employment has taken on the task of challenging and rethinking the premises that underlie traditions of human capital development in this country. This task is summarized in the question, "Who should teach which work-related skills to whom, when, and how?" Its first priority is that the Center's primary…

Seeking Sustainable Public Universities: The Legacy of the Great Recession. Research & Occasional Paper Series: CSHE.10.11

Science.gov (United States)

Lyall, Katharine

2011-01-01

The business models under which most public universities in the U.S. operate have become unsustainable. They were put in place when state economies were stronger and there were fewer programs making competing claims on state funds. The current Great Recession has made things worse, but the unsustainability of current business models derives from…

Paradoxes and Dilemmas in Managing E-Learning in Higher Education. Research & Occasional Paper Series. CSHE.7.03

Science.gov (United States)

Guri-Rosenblit, Sarah

2003-01-01

The new information and communication technologies (ICT) affect currently most spheres of life, including all educational levels. Their effects are most likely to grow in the future. However, many predictions in the last few years as to the sweeping impact of the ICT on restructuring the teaching/learning practices at universities and their high…

What's So Hard about Staff Development? A Study in Face-to-Face Interaction. Occasional Paper No. 14.

Science.gov (United States)

Anang, Arlene; Florio-Ruane, Susan

Staff development carried out within a conference format is multidimensional, ambiguous, potentially face-threatening, and complex. It is dependent upon the interactional work that takes place during face-to-face negotiations. The skills and knowledge of the staff developer cannot be shared with a teacher in a vacuum, but are dependent upon the…

European Standards and Guidelines in a Nordic Perspective: Joint Nordic Project 2005-2006. ENQA Occasional Papers 11

Science.gov (United States)

Vinther-Jorgensen, Tue, Ed.; Hansen, Signe Ploug, Ed.

2006-01-01

This report presents the results of the joint 2005-06 project of the Nordic Quality Assurance Network in Higher Education (NOQA). The project focused on the European standards and guidelines for quality assurance agencies, examining them in a Nordic perspective. The project aimed at interpreting and clarifying the European standards and guidelines…

Education Finance in Egypt: Problems and a Possible Solution. Occasional Paper. RTI Press Publication OP-0017-1401

Science.gov (United States)

Healey, F. Henry; Crouch, Luis; Hanna, Rafik

2014-01-01

Egypt, currently in the throes of major political change, will likely undergo reforms of various sorts in the next few years. Some of these reforms are likely to give local entities, including schools, greater control over education finances. In 2007, the Government of Egypt began to decentralize some non-personnel recurrent finances from the…

A Vision in Progress. The Decision To Establish a Public University at Monterey Bay. An Occasional Paper.

Science.gov (United States)

Chance, William

This report describes the decision-making process and problems encountered during the 48 months it took to establish a new university, California State University at Monterey Bay, on the site of Fort Ord, a recently closed military base. After an introduction, the report is organized in four sections, one for each phase of the process. The first…

Microcomputer Materials from MEP. An Annotated Directory of Packages of Interest to Further Education. An Occasional Paper.

Science.gov (United States)

Gilbert, Leslie

Designed to disseminate information to the post-school sector of United Kingdom education, this directory provides information on 50 microcomputer software packages developed by the Microelectronics Education Program (MEP) and available through educational publishers. Subject areas represented include accountancy, biology, business education,…

New Directions in Vocational Education for the Handicapped: Implications for Research and Development. Occasional Paper No. 35.

Science.gov (United States)

Martin, Edwin

The history of educational programming for the handicapped has unfortunately been one of quiet discrimination. This pattern has come from the evolution of an isolation-based society. Society is moving increasingly toward the human and equity-based treatment of disabled people. Reflecting some court decisions, the Education of the Handicapped Act…

Sino-American Joint Partnerships: Why Some Succeed and Others Fail. Research & Occasional Paper Series: CSHE.1.14

Science.gov (United States)

Julius, Daniel J.; Leventhal, Mitch

2014-01-01

This article examines institutional and demographic variables associated with successful joint partnerships between US and Chinese institutions of higher education. Understanding those variables requires an appreciation of overarching issues or catalysts bringing both nations together and, as well, how postsecondary environments differ and the…

Karakteristik “Hyperpersonal Communication” dalam “Internet Relay Chat” sebagai Bagian dari “Computer Mediated Comunication”

OpenAIRE

Anne Maryani

2006-01-01

Computer-mediated-communication (CMC) probably has become the hottest buzzword in the field of media communication nowadays. CMC has laid the basics of hypersonal communication which interrelating agents and subjects of communication process by virtual communication. Internet Relay Chat, as one of CMC product widely used by public, characterizes hypersonal communication which involved sender-receiver interactions, the channel, and the feedback in a new transmitting mode. Emoticon, digital-bas...

Karakteristik “Hyperpersonal Communication” Dalam “Internet Relay Chat” Sebagai Bagian Dari “Computer Mediated Comunication”

OpenAIRE

Maryani, Anne

2006-01-01

Computer-mediated-communication (CMC) probably has become the hottest buzzword in the field of media communication nowadays. CMC has laid the basics of hypersonal communication which interrelating agents and subjects of communication process by virtual communication. Internet Relay Chat, as one of CMC product widely used by public, characterizes hypersonal communication which involved sender-receiver interactions, the channel, and the feedback in a new transmitting mode. Emoticon, digital-bas...

The Development of Environmental Barrier Coating Systems for SiC-SiC Ceramic Matrix Composites: Environment Effects on the Creep and Fatigue Resistance

Science.gov (United States)

Zhu, Dongming; Ghosn, Louis J.

2014-01-01

Topics covered include: Environmental barrier coating system development: needs, challenges and limitations; Advanced environmental barrier coating systems (EBCs) for CMC airfoils and combustors; NASA EBC systems and material system evolutions, Current turbine and combustor EBC coating emphases, Advanced development, processing, testing and modeling, EBC and EBC bond coats: recent advances; Design tool and life prediction of coated CMC components; Advanced CMC-EBC rig demonstrations; Summary and future directions.

Three-dimensional anatomical analysis of ligamentous attachments of the second through fifth carpometacarpal joints

International Nuclear Information System (INIS)

Nanno, Mitsuhiko; Sawaizumi, Takuya; Horiguchi, Gen; Ito, Hiromoto

2007-01-01

The purpose of this study is to identify, measure, and show the anatomic locations and areas of specific ligamentous attachments and paths of the second through fifth carpometacarpal (CMC) joints on a three-dimensional (3-D) surface model. Ten fresh-frozen cadaver wrists were used to dissect and identify the second through fifth CMC ligaments. The ligamentous attachments and whole bone surfaces were digitized three-dimensionally, and their areas were calculated. The attachments of each ligament were represented in a model in which their surfaces, as seen on computed tomography (CT), were overlaid with a digitized 3-D surface, and they were also visually demonstrated with a specific color on 3-D images of the bones. A total of 9 dorsal and 9 volar CMC ligaments and 1 CMC interosseous ligament were identified in the second through fifth CMC joints. An intra-articular ligament between the third and fourth metacarpals (MCs) and the capitate and hamate was also identified. In addition, 5 dorsal and 5 volar intermetacarpal ligaments and 3 intermetacarpal interosseous ligaments were also identified in the second through fifth intermetacarpal joints. A previously undescribed volar intermetacarpal ligament was found located between the third, fourth, and fifth MC bases. The anatomic 3-D attachment sites of the second through fifth CMC ligaments were visually depicted qualitatively, and their areas were quantified. This study has improved the knowledge and understanding of the normal anatomy and its impact on the mechanics of the second through fifth CMC joints. This 3-D information should facilitate the accurate assessment of radiographic images and the treatment of various injuries seen in the second through fifth CMC joints when performing ligament reconstruction, repair, osteochondral grafting, and arthroscopy. (author)

State of the Modern Information Professional, 1992-1993. An International View of the State of the Information Professional and the Information Profession in 1992-1993. FID Occasional Paper 4.

Science.gov (United States)

International Federation for Information and Documentation, The Hague (Netherlands).

The following 14 papers are provided: (1) "Perfil del profesional de la informacion en Venezuela" with a synopsis in English: "Profile of the Information Professional in Venezuela" (A. D. Anton and M. S. de Arenas); (2) "The Modern Information Professional in the Caribbean Setting" (D. Douglas); (3) "Development…

A short-term risk-benefit analysis of occasional and regular use of low-dose aspirin in primary prevention of vascular diseases: a nationwide population-based study.

Science.gov (United States)

Wu, I-Chen; Hsieh, Hui-Min; Wu, Ming-Tsang

2015-01-09

To calculate the short-term risk-benefit effect of occasional and regular use of low-dose aspirin (≤100 mg/day) in primary prevention. Two retrospective cohort studies. Taiwan. 63 788 and 24 910 patients of two nationwide population-based studies were examined. Two databases of 1 000 000 patients were randomly sampled from data of Taiwan's National Health Insurance (NHI) for years 1997-2000 (NHI 2000) and 2005 (NHI 2005). In NHI 2000, 63 788 patients 30-95 years of age were found not to have previously been prescribed aspirin before 1 January 2000, but to have first been prescribed low-dose aspirin after that date. They were also found to be at risk of first hospitalisation for any major vascular diseases including haemorrhage (major gastrointestinal haemorrhage or cerebral haemorrhage) and ischaemia (acute myocardial infarction or ischaemic stroke) after their first prescription. We also applied it to NHI 2005, and the number of eligible patients was 24 910. Patients prescribed low-dose aspirin for risk. Vascular diseases. In NHI 2000, the overall unadjusted rates of haemorrhage and ischaemia were 0.09% and 0.21%, respectively, for occasional users and 0.32% and 2.30%, respectively, for regular users. Adjusted net clinical risk of low-dose aspirin use between the two groups was 2.24% (95% CI 2.03% to 2.48%; ppreventing major vascular diseases in primary prevention. Prescribing regular low-dose aspirin for primary prevention should be done with caution. Future studies should explore the risk-benefit effect of long-term low-dose aspirin use in primary prevention. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Synthesis and characterization of carboxymethyl cellulose/organic montmorillonite nanocomposites and its adsorption behavior for Congo Red dye

Directory of Open Access Journals (Sweden)

Min-min Wang

2013-07-01

Full Text Available A series of carboxymethyl cellulose/organic montmorillonite (CMC/OMMT nanocomposites with different weight ratios of carboxymethyl cellulose (CMC to organic montmorillonite (OMMT were synthesized under different conditions. The nanocomposites were characterized by the Fourier transform infrared (FT-IR spectrophotometer, X-ray diffraction (XRD method, transmission electron microscope (TEM, scanning electron microscope (SEM, and thermal gravimetric (TG analysis. The results showed that the introduction of CMC may have different influences on the physico-chemical properties of OMMT and intercalated-exfoliated nanostructures were formed in the nanocomposites. The effects of different reaction conditions on the adsorption capacity of samples for Congo Red (CR dye were investigated by controlling the amount of hexadecyl trimethyl ammonium bromide (CTAB, the weight ratio of CMC to OMMT, the reaction time, and the reaction temperature. Results from the adsorption experiment showed that the adsorption capacity of the nanocomposites can reach 171.37 mg/g, with the amount of CTAB being 1.0 cation exchange capacity (CEC of MMT, the weight ratio of CMC to OMMT being 1:1, the reaction time being 6 h, and the reaction temperature being 60°C. The CMC/OMMT nanocomposite can be used as a potential adsorbent to remove CR dye from an aqueous solution.

Preparation and Characterization of Blended Films from Quaternized Hemicelluloses and Carboxymethyl Cellulose

Directory of Open Access Journals (Sweden)

Xian-Ming Qi

2015-12-01

Full Text Available Utilization of hemicelluloses from biomass energy is an important approach to explore renewable resources. A convenient, quick, and inexpensive method for the preparation of blended films from quaternized hemicelluloses (QH and carboxymethyl cellulose (CMC was introduced into this study. QH and CMC solution were first mixed to form homogeneous suspension, and then were dried under vacuum to fabricate the blended films. The FT-IR and XRD results indicated that the linkage between QH and CMC was due to the hydrogen bonding and electrostatic interaction. From the results of mechanical properties and water vapor permeability (WVP, the tensile strength of the blended films increased with the QH/CMC content ratio increasing in appropriate range, and the WVP of the blended films decreased. The maximum value of tensile strength of blend film achieved was 27.4 MPa. In addition, the transmittances of the blended films increased with the decreasing of QH/CMC content ratio. When the weight ratio (QH: CMC was 1:1.5, the blend film showed the best light transmittance (45%. All the results suggested that the blended films could be used in areas of application in the coating and packaging fields from the good tensile strength, transmittance, and low WVP.

Preparation and Characterization of Blended Films from Quaternized Hemicelluloses and Carboxymethyl Cellulose

Science.gov (United States)

Qi, Xian-Ming; Liu, Shi-Yun; Chu, Fang-Bing; Pang, Shuai; Liang, Yan-Ru; Guan, Ying; Peng, Feng; Sun, Run-Cang

2015-01-01

Utilization of hemicelluloses from biomass energy is an important approach to explore renewable resources. A convenient, quick, and inexpensive method for the preparation of blended films from quaternized hemicelluloses (QH) and carboxymethyl cellulose (CMC) was introduced into this study. QH and CMC solution were first mixed to form homogeneous suspension, and then were dried under vacuum to fabricate the blended films. The FT-IR and XRD results indicated that the linkage between QH and CMC was due to the hydrogen bonding and electrostatic interaction. From the results of mechanical properties and water vapor permeability (WVP), the tensile strength of the blended films increased with the QH/CMC content ratio increasing in appropriate range, and the WVP of the blended films decreased. The maximum value of tensile strength of blend film achieved was 27.4 MPa. In addition, the transmittances of the blended films increased with the decreasing of QH/CMC content ratio. When the weight ratio (QH: CMC) was 1:1.5, the blend film showed the best light transmittance (45%). All the results suggested that the blended films could be used in areas of application in the coating and packaging fields from the good tensile strength, transmittance, and low WVP. PMID:28787804

Hybrid nanostructured materials with tunable magnetic characteristics

Energy Technology Data Exchange (ETDEWEB)

Torres-Martínez, Nubia E.; Garza-Navarro, M. A., E-mail: marco.garzanr@uanl.edu.mx; García-Gutiérrez, Domingo; González-González, Virgilio A.; Torres-Castro, Alejandro; Ortiz-Méndez, U. [Universidad Autónoma de Nuevo León, Facultad de Ingeniería Mecánica y Eléctrica (Mexico)

2014-12-15

We report on the development of hybrid nanostructured materials (HNM) based on spinel-metal-oxide nanoparticles (SMON) stabilized in carboxymethyl-cellulose (CMC)/cetyltrimethyl-ammonium-bromide (CTAB) templates, with tunable magnetic characteristics. These HNM were synthesized using a one-pot chemical approach to obtain CMC/CTAB templates with controllable size and morphology, where the SMON could be densely arranged. The synthesized HNM were characterized by transmission electron microscopy and its related techniques, such as bright field (BF) and Z-contrast (HAADF-STEM) imaging, and selected area electron diffraction, as well as static magnetic measuring. Experimental evidence suggests that the morphology and size of the CMC/CTAB templates are highly dependent on the weight ratio of CTAB:SMON, as well as the hydration days of the CMC that is used for the synthesis of the HNM. Controlling these parameters allows modifying the density of the SMON arrangement in the CMC/CTAB templates. Moreover, magnetic features such as remanence, coercivity, and blocking/de-blocking processes of the particles’ magnetic moments are highly dependent on the interactions among the SMON assembled in the templates. Hence, the magnetic characteristics of HNM can be modulated or tuned by controlling the manner the SMON are arranged within the CMC/CTAB templates.

Gum cordia as carrier of antioxidants: effects on lipid oxidation of peanuts.

Science.gov (United States)

Haq, Muhammad Abdul; Azam, Mahmood; Hasnain, Abid

2015-04-01

Performance of antioxidants is improved by incorporating them into polymer matrix such as polysaccharides based edible coatings. Gum cordia, an anionic polysaccharide extracted from the fruits of Cordia.myxa could be used as carrier of antioxidants by virtue of its strong adhering and emulsifying properties. This study aimed to explore the potential of gum cordia as carrier of antioxidants when applied as edible coating on peanuts. Gum Cordia was compared with carboxymethyl cellulose (CMC) in delivering of antioxidants: butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT) and ascorbic acid (AA). Coated and uncoated peanuts were stored at 35 °C for 126 days and coating carrier effectiveness was measured by following lipid oxidation using chemical parameters (peroxide value and thiobarbituric acid reactive species) and sensory evaluation (oxidized flavor). Significant differences (p cordia was found better than CMC to deliver the antioxidants. Gum cordia based coating in combination with BHA/BHT exhibited highest protection (290 % higher shelf life than control) based on peroxide value (40 meq.O2 kg(-1)) followed by gum codia plus BHT (244 %), gum cordia plus BHA (232 %), CMC plus BHA/BHT (184 %), CMC plus BHA (139 %), CMC plus BHT (119 %), gum cordia plus AA (96 %) and CMC plus AA (46 %).

Exposure of wide cerebellomedullary cisterns for vascular lesion surgeries in cerebellomedullary cisterns: opening of unilateral cerebellomedullary fissures combined with lateral foramen magnum approach.

Science.gov (United States)

Matsushima, Toshio; Kawashima, Masatou; Inoue, Kohei; Matsushima, Ken; Miki, Koichi

2014-11-01

To clarify microsurgical anatomic features of the cerebellomedullary fissure (CMF), the natural cleavage plane between the cerebellum and the medulla, and its relationship to the cerebellomedullary cistern (CMC) and to describe a surgical technique that uses the unilateral trans-CMF approach for CMC surgeries. In the anatomic study, 2 formalin-fixed cadaver heads were used. In the clinical study, 3 patients with vertebral artery-posterior inferior cerebellar artery aneurysms and 3 patients with glossopharyngeal neuralgia were surgically treated through the unilateral trans-CMF approach combined with the transcondylar fossa approach, which is a lateral foramen magnum approach. The CMC was present at the lateral end of the CMF. The CMF was closed by arachnoidal adhesion, and the cerebellar hemisphere was superiorly attached to the cerebellar peduncle. After the unilateral CMF was completely opened, the cerebellar hemisphere was easily retracted rostrodorsally. Clinically, almost completely opening the unilateral CMF markedly enabled the retraction of the biventral lobule to obtain a wide surgical field safely for vascular CMC lesions. We present 2 representative cases. Combined unilateral trans-CMF/lateral foramen magnum approaches provide a wide and close surgical field in the CMC, allowing easy and safe CMC surgery. Copyright © 2014 Elsevier Inc. All rights reserved.

Design Considerations for Ceramic Matrix Composite Vanes for High Pressure Turbine Applications

Science.gov (United States)

Boyle, Robert J.; Parikh, Ankur H.; Nagpal, Vinod K.; Halbig, Michael C.

2013-01-01

Issues associated with replacing conventional metallic vanes with Ceramic Matrix Composite (CMC) vanes in the first stage of the High Pressure Turbine (HPT) are explored. CMC materials have higher temperature capability than conventional HPT vanes, and less vane cooling is required. The benefits of less vane coolant are less NOx production and improved vane efficiency. Comparisons between CMC and metal vanes are made at current rotor inlet temperatures and at an vane inlet pressure of 50 atm.. CMC materials have directionally dependent strength characteristics, and vane designs must accommodate these characteristics. The benefits of reduced NOx and improved cycle efficiency obtainable from using CMC vanes. are quantified Results are given for vane shapes made of a two dimensional CMC weave. Stress components due to thermal and pressure loads are shown for all configurations. The effects on stresses of: (1) a rib connecting vane pressure and suction surfaces; (2) variation in wall thickness; and (3) trailing edge region cooling options are discussed. The approach used to obtain vane temperature distributions is discussed. Film cooling and trailing edge ejection were required to avoid excessive vane material temperature gradients. Stresses due to temperature gradients are sometimes compressive in regions where pressure loads result in high tensile stresses.

Fiscal 1999 technical survey report. Green Helmet Project (China, Steel industry - Coal moisture control facilities); 1999 nendo green helmet jigyo (Chugoku seitetsugyo) sekitan choshitsu setsubi chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of meeting the needs of Chinese steelmaking corporations disclosed at an energy conservation diagnosing session of a Japan-China steelmaking energy conservation seminar held in July 1999, Japanese specialists were sent to Chinese steelmaking plants, namely, Benxi Iron and Steel (Group) Complex, Wuhan Iron and Steel (Group) Company, and Nanjing Iron and Steel Works. They described the CMC (coal moisture control) technique for its popularization and for effectively utilizing the same for coke ovens. Also, feasibility studies were conducted for CMC installation at the respective plants. Engineers were invited from the Chinese plants to Japan for the observation of associated facilities and for the exchange of opinions. As the result, leading members of the Chinese steelmaking plants now learned the usefulness of CMC. In the feasibility studies, CMC installation led to a reduction in dry distillation energy, that is, a reduction in the amount of fuel gas required, to an improvement on coke production, and to the selection of the fluidized bed dryer as the optimum system. At Chungching Iron and Steel Works, the existing CMC facilities were not in continuous operation because of an inclined conveyer failure, yet there was a strong will to utilize the CMC technique. (NEDO)

Management of post-LASIK dry eye: a multicenter randomized comparison of a new multi-ingredient artificial tear to carboxymethylcellulose

Directory of Open Access Journals (Sweden)

Wallerstein A

2018-05-01

Full Text Available Avi Wallerstein,1,2 W Bruce Jackson,3 Jeffrey Chambers,4 Amir M Moezzi,5 Hugh Lin,6 Peter A Simmons6 1Department of Ophthalmology, McGill University, Montreal, QC, Canada; 2LASIK MD, Montreal, QC, Canada; 3University of Ottawa Eye Institute of the Ottawa Hospital, Ottawa, ON, Canada; 4Kelowna Eye Care Center, Kelowna, BC, Canada; 5Centre for Ocular Research & Education (CORE, formerly Centre for Contact Lens Research, School of Optometry & Vision Science, University of Waterloo, Waterloo, ON, Canada; 6Allergan Clinical Research, Allergan plc, Irvine, CA, USA Purpose: To compare the efficacy and safety of a preservative-free, multi-ingredient formulation of carboxymethylcellulose 0.5%, hyaluronic acid 0.1%, and organic osmolytes (CMC-HA, to preservative-free carboxymethylcellulose 0.5% (CMC in the management of postoperative signs and symptoms of dry eye following laser-assisted in situ keratomileusis (LASIK. Methods: This was a double-masked, randomized, parallel-group study conducted in 14 clinical centers in Canada and Australia. Subjects with no more than mild dry eye instilled CMC-HA or CMC for 90 days post-LASIK. Ocular Surface Disease Index© (OSDI; primary efficacy measure, corneal staining, tear break-up time (TBUT, Schirmer’s test, acceptability/tolerability surveys, and visual acuity were assessed at screening and days 2, 10, 30, 60, and 90 post-surgery. Safety analyses included all enrolled. Results: A total of 148 subjects (CMC-HA, n=75; CMC, n=73 were enrolled and assigned to receive treatment, and 126 subjects completed the study without any protocol violations. Post-LASIK, dry eye signs/symptoms peaked at 10 days. OSDI scores for both groups returned to normal with no differences between treatment groups at day 90 (P=0.775. Corneal staining, Schirmer’s test, TBUT, and survey results were comparable. Higher mean improvements in uncorrected visual acuity were observed in the CMC-HA group at all study visits, reaching

Effect of carboxymethyl cellulose concentration on physical properties of biodegradable cassava starch-based films

Directory of Open Access Journals (Sweden)

Sriburi Pensiri

2011-02-01

Full Text Available Abstract Background Cassava starch, the economically important agricultural commodity in Thailand, can readily be cast into films. However, the cassava starch film is brittle and weak, leading to inadequate mechanical properties. The properties of starch film can be improved by adding plasticizers and blending with the other biopolymers. Results Cassava starch (5%w/v based films plasticized with glycerol (30 g/100 g starch were characterized with respect to the effect of carboxymethyl cellulose (CMC concentrations (0, 10, 20, 30 and 40%w/w total solid and relative humidity (34 and 54%RH on the mechanical properties of the films. Additionally, intermolecular interactions were determined by Fourier transform infrared spectroscopy (FT-IR, melting temperature by differential scanning calorimetry (DSC, and morphology by scanning electron microscopy (SEM. Water solubility of the films was also determined. Increasing concentration of CMC increased tensile strength, reduced elongation at break, and decreased water solubility of the blended films. FT-IR spectra indicated intermolecular interactions between cassava starch and CMC in blended films by shifting of carboxyl (C = O and OH groups. DSC thermograms and SEM micrographs confirmed homogeneity of cassava starch-CMC films. Conclusion The addition of CMC to the cassava starch films increased tensile strength and reduced elongation at break of the blended films. This was ascribed to the good interaction between cassava starch and CMC. Cassava starch-CMC composite films have the potential to replace conventional packaging, and the films developed in this work are suggested to be suitable for low moisture food and pharmaceutical products.

Biomimetic mineralization of calcium carbonate/carboxymethylcellulose microspheres for lysozyme immobilization

International Nuclear Information System (INIS)

Lu Zheng; Zhang Juan; Ma Yunzi; Song Siyue; Gu Wei

2012-01-01

Porous calcium carbonate/carboxymethylcellulose (CaCO 3 /CMC) microspheres were prepared by the biomimetic mineralization method for lysozyme immobilization via adsorption. The size and morphology of CaCO 3 /CMC microspheres were characterized by transmitted electron microscopy (TEM) and zeta potential measurement. The lysozyme immobilization was verified by Fourier transform infrared (FTIR) spectroscopy. The effects of pHs and temperatures on lysozyme adsorption were investigated as well. It was revealed that CaCO 3 /CMC microspheres could immobilize lysozyme efficiently via electrostatic interactions and a maximum adsorption capacity of 450 mg/g was achieved at pH 9.2 and 25 °C. Moreover, it was found that the adsorption process fitted well with the Langmuir isothermal model. In addition, UV, fluorescence, and circular dichroism (CD) spectroscopic studies showed that lysozyme maintained its original secondary structure during the adsorption/desorption process. Our study therefore demonstrated that CaCO 3 /CMC microsphere can be used as a cost-effective and efficient support for lysozyme immobilization. - Graphical abstract: CaCO 3 /CMC microsphere was prepared by a facile biomimetic mineralization method and can be used as an efficient and cost-effective support for lysozyme immobilization. Highlights: ► CaCO 3 /CMC microspheres were prepared by the biomimetic mineralization method. ► Lysozyme was efficiently immobilized to CaCO 3 /CMC microspheres via adsorption. ► A maximum adsorption capacity of 450 mg/g was obtained at pH 9.2 and 25 °C. ► The original secondary structure of lysozyme was maintained upon immobilization.

29 CFR 570.63 - Occupations involved in the operation of paper-products machines, scrap paper balers, and paper...

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Occupations involved in the operation of paper-products machines, scrap paper balers, and paper box compactors (Order 12). 570.63 Section 570.63 Labor Regulations... involved in the operation of paper-products machines, scrap paper balers, and paper box compactors (Order...

Al_2O_3/PVdF-HFP-CMC/PE separator prepared using aqueous slurry and post-hot-pressing method for polymer lithium-ion batteries with enhanced safety

International Nuclear Information System (INIS)

Deng, Yaoming; Song, Xiaona; Ma, Zhen; Zhang, Xinhe; Shu, Dong; Nan, Junmin

2016-01-01

A composite separator is prepared to improve the safety of lithium ion batteries (LIBs) based on a gravure coating aqueous slurry and post-hot-pressing method. An environmentally friendly aqueous slurry with an Al_2O_3 ceramic holder and polyvinylidene difluoride-hexafluoropropylene (PVdF-HFP) and carboxymethyl cellulose (CMC) dual-binders is coated on a polyolefin (PE) substrate to form a prototype Al-PHC/PE separator. Then, after assembling the separator in the batteries and hot-pressing at 70 °C and 0.8 MPa for 3 h, the granular PVdF-HFP is transformed into a colloidal structure containing an electrolyte, which can binds the Al_2O_3 nanoparticles together and increases the battery hardness. Compared with a PE separator (9 μm), the Al-PHC/PE-2 separator (12 μm, with a Al_2O_3/PVdF-HFP weight ratio of 7/3) displays a comparative ionic conductivity of 9.3 × 10"−"4 S cm"−"2 and exhibits no obvious thermal deformation at 110 °C for 60 min. All of the batteries assembled with Al-PHC/PE-2 separators passed nail penetration and impact tests. In addition, the capacity retention increases from 83.4% to 87.6% when the battery is assembled with Al-PHC/PE-2 instead of a PE separator and charge-discharged at 0.7C/1.0C for 350 cycles. The enhanced safety and cycle performance indicate the promising prospect of Al-PHC/PE separators in LIBs.

Development of high temperature resistant ceramic matrix composites based on SiC- and novel SiBNC-fibres

International Nuclear Information System (INIS)

Daenicke, Enrico

2014-01-01

Novel ceramic fibres in the quaternary system Si-B-C-N exhibit excellent high temperature stability and creep resistance. In th is work it was investigated, to what extent these outstanding properties of SiBNC-fibres can be transferred into ceramic matrix composites (CMC) in comparison to commercial silicon carbide (SiC) fibres. For the CMC development the liquid silicon infiltration (LSI) as well as the polymer infiltration and pyrolysis process (PIP) was applied. Extensive correlations between fibre properties, fibre coating (without, pyrolytic carbon, lanthanum phosphate), process parameters of the CMC manufacturing method and the mechanical and microstructural properties of the CMC before and after exposure to air could be established. Hence, the potential of novel CMCs can be assessed and application fields can be derived.

Ultrasonic and viscosimetric studies of samarium laurate in benzene-dimethylsulfoxide mixtures

International Nuclear Information System (INIS)

Mehrotra, K.N.; Anis, M.

1995-01-01

Ultrasonic and viscosity measurements of samarium laurate in benzene-DMSO mixtures of different compositions (7:3 and 1:1 V/V) have been used to determine the critical micelle concentration (CMC), soap-solvent interaction, and various acoustic parameters of the system. The values of critical micelle concentration increase with increasing amount of DMSO in the solvent mixtures. The viscosity results have been explained on the basis of equations proposed by Einstein, Vand. Moulik, and Jones-Dole. The values of CMC for samarium laurate obtained from the viscosity measurements are in agreement with the results obtained from ultrasonic measurements. The results show that the soap molecules do not aggregate appreciably below CMC there is a marked change in the aggregation behaviour at CMC. (author)

Effects of Fructose and Temperature on the Micellization of a Cationic Gemini Surfactant, Pentanediyl-1,5-bis(dimethylcetylammonium) Bromide in Aqueous Solutions

Science.gov (United States)

Alam, Md. Sayem; Mohammed Siddiq, A.; Mandal, Asit Baran

2017-12-01

By the conductivity measurements the effects of fructose and temperature (293-308 K) on the micellization of a cationic gemini surfactant (GS), pentanediyl-1,5-bis(dimethylcetylammonium) bromide in aqueous solutions have been investigated. The critical micelle concentration (CMC) of GS was measured at the different temperatures and fructose concentrations. An increasing trend of the CMC values is with addition of fructose. With increasing temperature, the CMC values are in a similar increasing trend. The CMC of GS by dye solubilization method at room temperature have been determined. The standard Gibbs energy, enthalpy and entropy of GS micellization have been evaluated. From these thermodynamic parameters, it was found that in presence of fructose, the stability of the GS aqueous solutions decreases.

Audio Papers

DEFF Research Database (Denmark)

Groth, Sanne Krogh; Samson, Kristine

2016-01-01

With this special issue of Seismograf we are happy to present a new format of articles: Audio Papers. Audio papers resemble the regular essay or the academic text in that they deal with a certain topic of interest, but presented in the form of an audio production. The audio paper is an extension...

Healthcare IT and Patient Empowerment

DEFF Research Database (Denmark)

Danholt, Peter; Bødker, Keld; Hertzum, Morten

2004-01-01

Technology Studies (STS), we address the question of designing IT support for communication and coordination among the heterogeneous network of actors involved in contemporary healthcare work. The paper reports work in progress from a diabetes outpatient clinic at a large Danish hospital. The treatment......This short paper outlines a recently initiated research project that concerns healthcare information systems and patient empowerment. Drawing on various theoretical backgrounds, Participatory Design (PD), Computer Supported Cooperative Work (CSCW), Computer Mediated Communication (CMC), and Science...

Influence of molecular weight and degree of substitution of various carboxymethyl celluloses on unheated and heated emulsion-type sausage models.

Science.gov (United States)

Gibis, Monika; Schuh, Valerie; Allard, Karin; Weiss, Jochen

2017-03-01

Four carboxymethyl celluloses (CMCs) differing in molecular weight (M W ) and degree of substitution (°DS) were initially characterized in NaCl solution (0.1 M) and on properties of emulsion-type sausage models. The impact of the different CMCs (0-2 wt%) on the rheological behavior and firmness of an emulsion-type sausage models containing 1.8wt% NaCl was studied. Rheology (unheated/heated) and firmness (heated) showed an increasing effect with increasing CMC concentrations. Addition of>1wt% CMC led to a decrease in storage modulus of the unheated/heated batter and to a decrease in firmness of heated independent of the CMC-type used. CLSM revealed that high amounts of CMCs prevented formation of a coherent protein matrix. Water-binding capacity indicated that CMC contributed to the water-retention capability of sausage batters. Small differences between the CMCs were observed using various °DS and similar M W. Results indicate that the addition of low CMC concentrations (≤0.5wt%) may help to reduce fat content. Copyright © 2016 Elsevier Ltd. All rights reserved.

Association and Diffusion of Li(+) in Carboxymethylcellulose Solutions for Environmentally Friendly Li-ion Batteries.

Science.gov (United States)

Casalegno, Mosè; Castiglione, Franca; Passarello, Marco; Mele, Andrea; Passerini, Stefano; Raos, Guido

2016-07-21

Carboxymethylcellulose (CMC) has been proposed as a polymeric binder for electrodes in environmentally friendly Li-ion batteries. Its physical properties and interaction with Li(+) ions in water are interesting not only from the point of view of electrode preparation-processability in water is one of the main reasons for its environmental friendliness-but also for its possible application in aqueous Li-ion batteries. We combine molecular dynamics simulations and variable-time pulsed field gradient spin-echo (PFGSE) NMR spectroscopy to investigate Li(+) transport in CMC-based solutions. Both the simulations and experimental results show that, at concentrations at which Li-CMC has a gel-like consistency, the Li(+) diffusion coefficient is still very close to that in water. These Li(+) ions interact preferentially with the carboxylate groups of CMC, giving rise to a rich variety of coordination patterns. However, the diffusion of Li(+) in these systems is essentially unrestricted, with a fast, nanosecond-scale exchange of the ions between CMC and the aqueous environment. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The impact of countermeasure propagation on the prevalence of computer viruses.

Science.gov (United States)

Chen, Li-Chiou; Carley, Kathleen M

2004-04-01

Countermeasures such as software patches or warnings can be effective in helping organizations avert virus infection problems. However, current strategies for disseminating such countermeasures have limited their effectiveness. We propose a new approach, called the Countermeasure Competing (CMC) strategy, and use computer simulation to formally compare its relative effectiveness with three antivirus strategies currently under consideration. CMC is based on the idea that computer viruses and countermeasures spread through two separate but interlinked complex networks-the virus-spreading network and the countermeasure-propagation network, in which a countermeasure acts as a competing species against the computer virus. Our results show that CMC is more effective than other strategies based on the empirical virus data. The proposed CMC reduces the size of virus infection significantly when the countermeasure-propagation network has properties that favor countermeasures over viruses, or when the countermeasure-propagation rate is higher than the virus-spreading rate. In addition, our work reveals that CMC can be flexibly adapted to different uncertainties in the real world, enabling it to be tuned to a greater variety of situations than other strategies.

Using a cellulose derivative as a stabilizing agent of ceramic suspensions

International Nuclear Information System (INIS)

Cerrutti, Bianca M.; Frollini, Elisabete

2009-01-01

Cellulose is the most abundant natural polymer, but its application has been hampered by its poor solubility, which is restricted to a few solvents. Nevertheless, it may be chemically modified to produce derivatives that are soluble in organic solvents, and most important, in water. Carboxymethylcellulose (CMC), one of the most versatile of such derivatives, is highly soluble in water. This allows its use in the pharmaceutical, food, paint, and adhesive industries. In this study, CMC was prepared by reaction of low average molecular weight microcrystalline cellulose and monochloroacetic acid as the etherifying agent in a highly alkaline medium. The degree of substitution of CMC, obtained by 1 HNMR spectroscopy was 0.7. CMC was found to induce the stabilization of aqueous alumina suspensions, yielding a decrease in both viscosity and particle size, while increasing the zeta potential. These results demonstrate that CMC, a derivative from a natural polymer, may be successfully used as a stabilizing agent of aqueous ceramic suspension instead of the polymers derived from raw fossil materials currently used. (author)

Postural responses of head and foot cutaneous microvascular flow and their sensitivity to bed rest

Science.gov (United States)

Aratow, Michael; Hargens, Alan R.; Meyer, J.-UWE; Arnaud, Sara B.

1991-01-01

To explore the mechanism for facial puffiness, headache, and nasal congestion associated with microgravity and cephalad fluid shifts, the postural responses of the cutaneous microcirculation (CMC) in the forehead and dorsum of the foot of eight healthy men were studied by changing body position on a tilt table and measuring blood flows with a laser Doppler flowmeter. Increasing arterial pressure in the feet by moving from a -6-deg head-down tilt to a 60-deg head-up posture decreased foot CMC by 46.5 + or - 12.0 percent. Raising arterial pressure in the head increased forehead CMC by 25.5 + or - 0.7 percent (p less than 0.05). To investigate the possibility that these opposite responses could be modified by simulated microgravity, tilt test were repeated after 7 d of -6-deg head-down-tilt bed rest. The responses were not significantly different from those recorded before bed rest. Therefore, CMC in the feet is well regulated to prevent edema when shifting to an upright position, whereas there is less regulation in the head CMC.

An Exploratory Analysis of Computer Mediated Communications on Cyberstalking Severity

Directory of Open Access Journals (Sweden)

Stephen D. Barnes

2007-09-01

Full Text Available The interaction between disjunctive interpersonal relationships, those where the parties to the relationship disagree on the goals of the relationship, and the use of computer mediated communications channels is a relatively unexplored domain.  Bargh (2002 suggests that CMC channels can amplify the development of interpersonal relationships, and notes that the effect is not constant across communications activities.  This proposal suggests a line of research that explores the interaction between computer mediated communications (CMC and stalking, which is a common form of disjunctive relationships.  Field data from cyberstalking cases will be used to look at the effects of CMC channels on stalking case severity, and exploring the relative impacts of CMC channel characteristics on such cases.  To accomplish this, a ratio scaled measure of stalking case severity is proposed for use in exploring the relationship between case severity and CMC media characteristics, anonymity, and the prior relationship between the stalker and the victim.  Expected results are identified, and follow-up research is proposed. 

Radiation processing of natural polymers for industrial and agricultural applications

International Nuclear Information System (INIS)

Hegazy, El-Sayed A.; AbdEl-Rehim, H.; Diaa, D.A.; El-Barbary, A.

2008-01-01

Radiation induced degradation technology is a new and promising application of ionizing radiation to develop viscose, pulp, paper, food preservation, pharmaceutical production, and natural bioactive agents industries. Controlling the degree of degradation, uniform molecular weight distribution, saving achieved in the chemicals (used in conventional methods) on a cost basis, and environmentally friendly process are the beneficial effects of using radiation technology in these industries. However, for some development countries such technology is not economic. Therefore, a great efforts should be done to reduce the cost required for such technologies. One of the principle factors for reducing the cost is achieving the degradation at low irradiation doses. The addition of some additives such as potassium per-sulfate (KPS), ammonium per-sulfate (APS), or H 2 O 2 to natural polymers (carboxymethylcellulose (CMC), chitosan, carrageenan and Na-alginate) during irradiation process accelerates their degradation. The highest degradation rate of polysaccharides obtained when APS was used. The end product of irradiated CMC, chitosan, carrageenan and Na-alginate may be used as food additive or benefited in agricultural purposes. On the other hand, radiation crosslinking of PAAm or PNIPAAm is affected by the presence of natural polymer like CMC-Na and carrageenan due to their degradability which could be controlled according to its concentration in the bulk medium and irradiation dose. Accordingly, the gel content, thermo-sensitivity (LCST) and swelling properties of PNIPAAm based natural polymers could be controlled. The swelling of the prepared copolymer hydrogels was investigated for its possible use in personal care articles particularly diapers or as carriers for drug delivery systems. The prepared crosslinked copolymers possessed high and fast swelling properties in simulated urine media and the swelling ratios of CMC-Na/PAAm gels in urine are acceptable for diaper

Radiation Processing of Natural Polymers for Industrial Applications

International Nuclear Information System (INIS)

Hegazy, E.A.

2008-01-01

Radiation induced degradation technology is a new and promising application of ionizing radiation to develop viscose, pulp, paper, food preservation, pharmaceutical production, and natural bioactive agents industries. Controlling the degree of degradation, uniform molecular weight distribution, saving achieved in the chemicals (used in conventional methods) on a cost basis, and environmentally friendly process are the beneficial effects of using radiation technology in these industries. However, for some development countries such technology is not economic. Therefore, a great effort should be done to reduce the cost required for such technologies. One of the principle factors for reducing the cost is achieving the degradation at low irradiation doses. The addition of some additives such as potassium per-sulfate (KPS), ammonium per-sulfate (APS), or H 2 O 2 to natural polymers (carboxy-methylcellulose (CMC), chitosan, carrageenan and Na-alginate) during irradiation process accelerates their degradation. The highest degradation rate of polysaccharides obtained when APS was used. The end product of irradiated CMC, chitosan, carrageenan and Na-alginate may be used as food additive or benefited in agricultural purposes. On the other hand, radiation crosslinking of PAAm or PNIPAAm is affected by the presence of natural polymer like CMC-Na and carrageenan due to their degradability which could be controlled according to its concentration in the bulk medium and irradiation dose. Accordingly, the gel content, thermo-sensitivity (LCST) and swelling properties of PNIPAAm based natural polymers could be controlled. The swelling of the prepared copolymer hydrogels was investigated for its possible use in personal care articles particularly diapers or as carriers for drug delivery systems. The prepared crosslinked copolymers possessed high and fast swelling properties in simulated urine media and the swelling ratios of CMC-Na /PAAm gels in urine are acceptable for diaper

Melt Infiltrated Ceramic Matrix Composites for Shrouds and Combustor Liners of Advanced Industrial Gas Turbines

Energy Technology Data Exchange (ETDEWEB)

Gregory Corman; Krishan Luthra; Jill Jonkowski; Joseph Mavec; Paul Bakke; Debbie Haught; Merrill Smith

2011-01-07

This report covers work performed under the Advanced Materials for Advanced Industrial Gas Turbines (AMAIGT) program by GE Global Research and its collaborators from 2000 through 2010. A first stage shroud for a 7FA-class gas turbine engine utilizing HiPerComp{reg_sign}* ceramic matrix composite (CMC) material was developed. The design, fabrication, rig testing and engine testing of this shroud system are described. Through two field engine tests, the latter of which is still in progress at a Jacksonville Electric Authority generating station, the robustness of the CMC material and the shroud system in general were demonstrated, with shrouds having accumulated nearly 7,000 hours of field engine testing at the conclusion of the program. During the latter test the engine performance benefits from utilizing CMC shrouds were verified. Similar development of a CMC combustor liner design for a 7FA-class engine is also described. The feasibility of using the HiPerComp{reg_sign} CMC material for combustor liner applications was demonstrated in a Solar Turbines Ceramic Stationary Gas Turbine (CSGT) engine test where the liner performed without incident for 12,822 hours. The deposition processes for applying environmental barrier coatings to the CMC components were also developed, and the performance of the coatings in the rig and engine tests is described.

Aggregation and phase separation behavior of an amphiphilic drug promazine hydrochloride under the influence of inorganic salts and ureas

Energy Technology Data Exchange (ETDEWEB)

Rub, Malik Abdul, E-mail: malikrub@gmail.com [Center of Excellence for Advanced Materials Research, King Abdulaziz University, Jeddah 21589 (Saudi Arabia); Chemistry Department, King Abdulaziz University, Jeddah 21589 (Saudi Arabia); Asiri, Abdullah M.; Azum, Naved; Khan, Anish; Khan, Aftab Aslam Parwaz; Khan, Sher Bahadar; Rahman, Mohammed M. [Center of Excellence for Advanced Materials Research, King Abdulaziz University, Jeddah 21589 (Saudi Arabia); Chemistry Department, King Abdulaziz University, Jeddah 21589 (Saudi Arabia); Kabir-ud-Din [Department of Chemistry, Aligarh Muslim University, Aligarh 202002 (India)

2013-12-20

Highlights: • Aggregation and clouding behavior of PMZ-additive (salts/ureas) mixtures have been investigated. • Both urea and thiourea, at low concentrations, decrease the cmc but, at high concentrations, increase it. • However, ΔH{sub m}° for pure drug/drug–additive systems is negative at low temperature and positive at higher temperature. • The ΔS{sub m}° values are positive, their magnitude being more at T = 303.15 K and above. - Abstract: Self-association and phase separation phenomena of an amphiphilic phenothiazine drug promazine hydrochloride (PMZ) in the absence and presence of inorganic salts (NaF, NaCl and NaBr) and ureas (urea and thiourea) have been investigated in the present study. By the increase in temperature the critical micelle concentration (cmc) of drug PMZ first increases then decreases. Maximum cmc values were obtained at 303.15 K in presence or absence of additives (salts/ureas). Decrease in cmc occurs by the addition of the inorganic salts which is explained on the basis of nature and ion size. Ureas (urea and thiourea) decreased the cmc at low concentration; however, at higher concentrations, increase in cmc was observed with both the additives. Increasing inorganic salt concentrations caused an increase in the cloud point (CP) of PMZ, whereas urea decreased the CP. Significant thermodynamic parameters were also evaluated and discussed.

Aggregation and phase separation behavior of an amphiphilic drug promazine hydrochloride under the influence of inorganic salts and ureas

International Nuclear Information System (INIS)

Rub, Malik Abdul; Asiri, Abdullah M.; Azum, Naved; Khan, Anish; Khan, Aftab Aslam Parwaz; Khan, Sher Bahadar; Rahman, Mohammed M.; Kabir-ud-Din

2013-01-01

Highlights: • Aggregation and clouding behavior of PMZ-additive (salts/ureas) mixtures have been investigated. • Both urea and thiourea, at low concentrations, decrease the cmc but, at high concentrations, increase it. • However, ΔH m ° for pure drug/drug–additive systems is negative at low temperature and positive at higher temperature. • The ΔS m ° values are positive, their magnitude being more at T = 303.15 K and above. - Abstract: Self-association and phase separation phenomena of an amphiphilic phenothiazine drug promazine hydrochloride (PMZ) in the absence and presence of inorganic salts (NaF, NaCl and NaBr) and ureas (urea and thiourea) have been investigated in the present study. By the increase in temperature the critical micelle concentration (cmc) of drug PMZ first increases then decreases. Maximum cmc values were obtained at 303.15 K in presence or absence of additives (salts/ureas). Decrease in cmc occurs by the addition of the inorganic salts which is explained on the basis of nature and ion size. Ureas (urea and thiourea) decreased the cmc at low concentration; however, at higher concentrations, increase in cmc was observed with both the additives. Increasing inorganic salt concentrations caused an increase in the cloud point (CP) of PMZ, whereas urea decreased the CP. Significant thermodynamic parameters were also evaluated and discussed