Relationships between diameter and height of trees in natural ...

African Journals Online (AJOL)

Relationships between diameter and height of trees in natural tropical forest in Tanzania. Wilson A Mugasha, Ole M Bollandsås, Tron Eid. Abstract. The relationship between tree height (h) and tree diameter at breast height (dbh) is an important element describing forest stands. In addition, h often is a required variable in ...

Comparing RIEGL RiCOPTER UAV LiDAR Derived Canopy Height and DBH with Terrestrial LiDAR.

Science.gov (United States)

Brede, Benjamin; Lau, Alvaro; Bartholomeus, Harm M; Kooistra, Lammert

2017-10-17

In recent years, LIght Detection And Ranging (LiDAR) and especially Terrestrial Laser Scanning (TLS) systems have shown the potential to revolutionise forest structural characterisation by providing unprecedented 3D data. However, manned Airborne Laser Scanning (ALS) requires costly campaigns and produces relatively low point density, while TLS is labour intense and time demanding. Unmanned Aerial Vehicle (UAV)-borne laser scanning can be the way in between. In this study, we present first results and experiences with the RIEGL RiCOPTER with VUX ® -1UAV ALS system and compare it with the well tested RIEGL VZ-400 TLS system. We scanned the same forest plots with both systems over the course of two days. We derived Digital Terrain Model (DTMs), Digital Surface Model (DSMs) and finally Canopy Height Model (CHMs) from the resulting point clouds. ALS CHMs were on average 11.5 c m higher in five plots with different canopy conditions. This showed that TLS could not always detect the top of canopy. Moreover, we extracted trunk segments of 58 trees for ALS and TLS simultaneously, of which 39 could be used to model Diameter at Breast Height (DBH). ALS DBH showed a high agreement with TLS DBH with a correlation coefficient of 0.98 and root mean square error of 4.24 c m . We conclude that RiCOPTER has the potential to perform comparable to TLS for estimating forest canopy height and DBH under the studied forest conditions. Further research should be directed to testing UAV-borne LiDAR for explicit 3D modelling of whole trees to estimate tree volume and subsequently Above-Ground Biomass (AGB).

Why size matters: the interactive influences of tree diameter distribution and sap flow parameters on upscaled transpiration.

Science.gov (United States)

Berry, Z Carter; Looker, Nathaniel; Holwerda, Friso; Gómez Aguilar, León Rodrigo; Ortiz Colin, Perla; González Martínez, Teresa; Asbjornsen, Heidi

2018-02-01

In stands with a broad range of diameters, a small number of very large trees can disproportionately influence stand basal area and transpiration (Et). Sap flow-based Et estimates may be particularly sensitive to large trees due to nonlinear relationships between tree-level water use (Q) and tree diameter at breast height (DBH). Because Q is typically predicted on the basis of DBH and sap flow rates measured in a subset of trees and then summed to obtain Et, we assessed the relative importance of DBH and sap flow variables (sap velocity, Vs, and sapwood depth, Rs) in determining the magnitude of Et and its dependence on large trees in a tropical montane forest ecosystem. Specifically, we developed a data-driven simulation framework to vary the relationship between DBH and Vs and stand DBH distribution and then calculate Q, Et and the proportion of Et contributed by the largest tree in each stand. Our results demonstrate that variation in how Rs is determined in the largest trees can alter estimates up to 26% of Et while variation in how Vs is determined can vary results by up to 132%. Taken together, these results highlight a great need to expand our understanding of water transport in large trees as this hinders our ability to predict water fluxes accurately from stand to catchment scales. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Roosting habitat of Merriam's turkeys in the Black Hills, South Dakota

Science.gov (United States)

Mark A. Rumble

1992-01-01

Lack of roost habitat (trees >40 cm diameter breast height [dbh] and >18 m2/ha basal area) can limit populations of Merriam’s turkeys (Meleagris gallopavo merriami). The Black Hills region has relatively large populations of Merriam’s turkeys, yet trees >40 cm dbh are uncommon. Consequently, I studied...

Applying and Individual-Based Model to Simultaneously Evaluate Net Ecosystem Production and Tree Diameter Increment

Science.gov (United States)

Fang, F. J.

2017-12-01

Reconciling observations at fundamentally different scales is central in understanding the global carbon cycle. This study investigates a model-based melding of forest inventory data, remote-sensing data and micrometeorological-station data ("flux towers" estimating forest heat, CO2 and H2O fluxes). The individual tree-based model FORCCHN was used to evaluate the tree DBH increment and forest carbon fluxes. These are the first simultaneous simulations of the forest carbon budgets from flux towers and individual-tree growth estimates of forest carbon budgets using the continuous forest inventory data — under circumstances in which both predictions can be tested. Along with the global implications of such findings, this also improves the capacity for forest sustainable management and the comprehensive understanding of forest ecosystems. In forest ecology, diameter at breast height (DBH) of a tree significantly determines an individual tree's cross-sectional sapwood area, its biomass and carbon storage. Evaluation the annual DBH increment (ΔDBH) of an individual tree is central to understanding tree growth and forest ecology. Ecosystem Carbon flux is a consequence of key ecosystem processes in the forest-ecosystem carbon cycle, Gross and Net Primary Production (GPP and NPP, respectively) and Net Ecosystem Respiration (NEP). All of these closely relate with tree DBH changes and tree death. Despite advances in evaluating forest carbon fluxes with flux towers and forest inventories for individual tree ΔDBH, few current ecological models can simultaneously quantify and predict the tree ΔDBH and forest carbon flux.

Sub-Compartment Variation in Tree Height, Stem Diameter and Stocking in a Pinus radiata D. Don Plantation Examined Using Airborne LiDAR Data

Directory of Open Access Journals (Sweden)

Hanieh Saremi

2014-08-01

Full Text Available Better information regarding the spatial variability of height, Diameter at Breast Height (DBH and stocking could improve inventory estimates at the operational Planning Unit since these parameters are used extensively in allometric equations, including stem volume, biomass and carbon calculations. In this study, the influence of stand stocking on height and DBH of two even aged radiata pine (Pinus radiata D. Don stands were investigated using airborne Light Detection and Ranging (LiDAR data at a study site in New South Wales, Australia. Both stands were characterized by irregular stocking due to patchy establishment and self-thinning in the absence of any silvicultural thinning events. For the purpose of this study, a total of 34 plots from a 34 year old site and 43 plots from a nine year old site were established, from which a total of 447 trees were sampled. Within these plots, DBH and height measurements were measured and their relationships with stocking were evaluated. LiDAR was used for height estimation as well as stem counts in fixed plots (stocking. The results showed a significant relationship between stem DBH and stocking. At both locations, trees with larger diameters were found on lower stocking sites. Height values were also significantly correlated with stocking, with taller trees associated with high stocking. These results were further verified of additional tree samples, with independent field surveys for DBH and LiDAR-derived metrics for height analysis. This study confirmed the relationship between P. radiata tree heights and stem diameter with stocking and demonstrated the capacity of LiDAR to capture sub-compartment variation in these tree-level attributes.

Development and evaluation of height diameter at breast models for native Chinese Metasequoia.

Science.gov (United States)

Liu, Mu; Feng, Zhongke; Zhang, Zhixiang; Ma, Chenghui; Wang, Mingming; Lian, Bo-Ling; Sun, Renjie; Zhang, Li

2017-01-01

Accurate tree height and diameter at breast height (dbh) are important input variables for growth and yield models. A total of 5503 Chinese Metasequoia trees were used in this study. We studied 53 fitted models, of which 7 were linear models and 46 were non-linear models. These models were divided into two groups of single models and multivariate models according to the number of independent variables. The results show that the allometry equation of tree height which has diameter at breast height as independent variable can better reflect the change of tree height; in addition the prediction accuracy of the multivariate composite models is higher than that of the single variable models. Although tree age is not the most important variable in the study of the relationship between tree height and dbh, the consideration of tree age when choosing models and parameters in model selection can make the prediction of tree height more accurate. The amount of data is also an important parameter what can improve the reliability of models. Other variables such as tree height, main dbh and altitude, etc can also affect models. In this study, the method of developing the recommended models for predicting the tree height of native Metasequoias aged 50-485 years is statistically reliable and can be used for reference in predicting the growth and production of mature native Metasequoia.

Development and evaluation of height diameter at breast models for native Chinese Metasequoia.

Directory of Open Access Journals (Sweden)

Mu Liu

Full Text Available Accurate tree height and diameter at breast height (dbh are important input variables for growth and yield models. A total of 5503 Chinese Metasequoia trees were used in this study. We studied 53 fitted models, of which 7 were linear models and 46 were non-linear models. These models were divided into two groups of single models and multivariate models according to the number of independent variables. The results show that the allometry equation of tree height which has diameter at breast height as independent variable can better reflect the change of tree height; in addition the prediction accuracy of the multivariate composite models is higher than that of the single variable models. Although tree age is not the most important variable in the study of the relationship between tree height and dbh, the consideration of tree age when choosing models and parameters in model selection can make the prediction of tree height more accurate. The amount of data is also an important parameter what can improve the reliability of models. Other variables such as tree height, main dbh and altitude, etc can also affect models. In this study, the method of developing the recommended models for predicting the tree height of native Metasequoias aged 50-485 years is statistically reliable and can be used for reference in predicting the growth and production of mature native Metasequoia.

Reduced power processor requirements for the 30-cm diameter HG ion thruster

Science.gov (United States)

Rawlin, V. K.

1979-01-01

The characteristics of power processors strongly impact the overall performance and cost of electric propulsion systems. A program was initiated to evaluate simplifications of the thruster-power processor interface requirements. The power processor requirements are mission dependent with major differences arising for those missions which require a nearly constant thruster operating point (typical of geocentric and some inbound planetary missions) and those requiring operation over a large range of input power (such as outbound planetary missions). This paper describes the results of tests which have indicated that as many as seven of the twelve power supplies may be eliminated from the present Functional Model Power Processor used with 30-cm diameter Hg ion thrusters.

Individual-Tree Diameter Growth Models for Mixed Nothofagus Second Growth Forests in Southern Chile

Directory of Open Access Journals (Sweden)

Paulo C. Moreno

2017-12-01

Full Text Available Second growth forests of Nothofagus obliqua (roble, N. alpina (raulí, and N. dombeyi (coihue, known locally as RORACO, are among the most important native mixed forests in Chile. To improve the sustainable management of these forests, managers need adequate information and models regarding not only existing forest conditions, but their future states with varying alternative silvicultural activities. In this study, an individual-tree diameter growth model was developed for the full geographical distribution of the RORACO forest type. This was achieved by fitting a complete model by comparing two variable selection procedures: cross-validation (CV, and least absolute shrinkage and selection operator (LASSO regression. A small set of predictors successfully explained a large portion of the annual increment in diameter at breast height (DBH growth, particularly variables associated with competition at both the tree- and stand-level. Goodness-of-fit statistics for this final model showed an empirical coefficient of correlation (R2emp of 0.56, relative root mean square error of 44.49% and relative bias of −1.96% for annual DBH growth predictions, and R2emp of 0.98 and 0.97 for DBH projection at 6 and 12 years, respectively. This model constitutes a simple and useful tool to support management plans for these forest ecosystems.

Conditioning a segmented stem profile model for two diameter measurements

Science.gov (United States)

Raymond L. Czaplewski; Joe P. Mcclure

1988-01-01

The stem profile model of Max and Burkhart (1976) is conditioned for dbh and a second upper stem measurement. This model was applied to a loblolly pine data set using diameter outside bark at 5.3m (i.e., height of 17.3 foot Girard form class) as the second upper stem measurement, and then compared to the original, unconditioned model. Variance of residuals was reduced...

Estimating Dbh of Trees Employing Multiple Linear Regression of the best Lidar-Derived Parameter Combination Automated in Python in a Natural Broadleaf Forest in the Philippines

Science.gov (United States)

Ibanez, C. A. G.; Carcellar, B. G., III; Paringit, E. C.; Argamosa, R. J. L.; Faelga, R. A. G.; Posilero, M. A. V.; Zaragosa, G. P.; Dimayacyac, N. A.

2016-06-01

Diameter-at-Breast-Height Estimation is a prerequisite in various allometric equations estimating important forestry indices like stem volume, basal area, biomass and carbon stock. LiDAR Technology has a means of directly obtaining different forest parameters, except DBH, from the behavior and characteristics of point cloud unique in different forest classes. Extensive tree inventory was done on a two-hectare established sample plot in Mt. Makiling, Laguna for a natural growth forest. Coordinates, height, and canopy cover were measured and types of species were identified to compare to LiDAR derivatives. Multiple linear regression was used to get LiDAR-derived DBH by integrating field-derived DBH and 27 LiDAR-derived parameters at 20m, 10m, and 5m grid resolutions. To know the best combination of parameters in DBH Estimation, all possible combinations of parameters were generated and automated using python scripts and additional regression related libraries such as Numpy, Scipy, and Scikit learn were used. The combination that yields the highest r-squared or coefficient of determination and lowest AIC (Akaike's Information Criterion) and BIC (Bayesian Information Criterion) was determined to be the best equation. The equation is at its best using 11 parameters at 10mgrid size and at of 0.604 r-squared, 154.04 AIC and 175.08 BIC. Combination of parameters may differ among forest classes for further studies. Additional statistical tests can be supplemented to help determine the correlation among parameters such as Kaiser- Meyer-Olkin (KMO) Coefficient and the Barlett's Test for Spherecity (BTS).

High-thrust and low-power operation of a 30-cm-diameter mercury ion thruster

Science.gov (United States)

Beattie, J. R.; Kami, S.

1981-01-01

An investigation of a 30-cm-diameter mercury ion thruster designed for high-thrust and low-power operation is described. Experimental results are presented which indicate that good performance and long lifetime are achieved by using a boundary magnetic field arrangement to confine the ionizing electrons. Details of advanced ion-optics designs are discussed, and performance measurements obtained with an advanced two-grid ion-optics assembly are presented. Scaling of the state-of-the-art hollow cathode for higher emission-current capability is described, and performance and lifetime measurements are presented for the scaled cathode.

Pilot study: safety and effectiveness of simple ultrasound-guided high-intensity focused ultrasound ablating uterine leiomyoma with a diameter greater than 10 cm.

Science.gov (United States)

Hou, Ruijie; Wang, Liwei; Li, Shaoping; Rong, Fengmin; Wang, Yuanyuan; Qin, Xuena; Wang, Shijin

2018-02-01

The study aimed to prospectively investigate whether uterine leiomyoma greater than 10 cm in diameter could be treated with simple ultrasound-guided high-intensity focused ultrasound (USgHIFU) in one-time treatment. A total of 36 patients with 36 symptomatic uterine leiomyoma greater than 10 cm in diameter who underwent simple USgHIFU treatment alone were analysed. Enhanced MRI was performed before and after HIFU treatment, and all patients had follow-up for 6 months after treatment. Symptom severity scores, treatment time, treatment speed, ablation rate, energy effect ratio, uterine leiomyoma regression rate, adverse events, liver and kidney functions, coagulation function and routine blood count were included in the study endpoints. The mean diameter of uterine leiomyoma was 11.2 ± 1.3 cm (10.0-14.3 cm). The median treatment time and treatment speed were 104.0 min (90.0-140.0 min) and 118.8 cm 3  h -1  (86.2-247.1 cm 3  h -1 ), respectively. The ablation rate of uterine leiomyoma was 71.9 ± 20.4% (32.1-100.0%), and the regression rate of uterine leiomyoma was 40.8 ± 7.5% (25.6-59.9%) at 6 months after treatment. The mean symptom severity scores decreased by an average of approximately 8.6 ± 2.3 (5-14) points. There were no significant changes in haemogram and blood chemical indexes of patients, except for the transient elevation of aspartate aminotransferase, total bilirubin and white blood cells after treatment. No serious adverse reactions occurred. According to our preliminary results, simple USgHIFU is a safe and effective single-treatment method of treating uterine leiomyoma greater than 10 cm in diameter and is an almost innocuous alternative therapeutic strategy. Advances in knowledge: The conclusions indicate simple USgHIFU is safe and effective as one-time treatment of uterine leiomyoma greater than 10 cm in diameter, it could be a promising therapeutic strategy.

Ultrasonographic criteria for fine needle aspiration of nonpalpable thyroid nodules 1–2 cm in diameter

Energy Technology Data Exchange (ETDEWEB)

Kim, Ji Yang, E-mail: j0kim040@louisville.edu [Department of Radiology, University of Louisville, 530 South Jackson Street, Louisville, KY 40242 (United States); Department of Healthcare System Gangnam Center, Department of Radiology, Seoul National University Hospital, 737 Star tower, 40 floor, Yeoksam-dong, Gangnam-gu, Seoul 135-080 (Korea, Republic of); Kim, Soo Young; Yang, Ki Ra [Department of Healthcare System Gangnam Center, Department of Radiology, Seoul National University Hospital, 737 Star tower, 40 floor, Yeoksam-dong, Gangnam-gu, Seoul 135-080 (Korea, Republic of)

2013-02-15

Purpose: To investigate the ultrasonographic (US) characteristics for nonpalpable thyroid nodules 1–2 cm in diameter and to evaluate the guideline for fine needle aspiration (FNA) in terms of US findings. Materials and methods: Between June 2005 and November 2006, FNA was performed in 919 thyroid nodules by radiologists. Of these nodules, 51 malignant nodules and 72 benign nodules were finally included. All 123 nodules were analyzed by 3 radiologists if there were the following US characteristics: marked hypoechogenecity, hypoechogenecity, isoechogenecity, hyperechogenecity, microcalcification, coarse calcification, rim calcification, spiculated margin, taller-than-wide shape, irregular shape, hypoechoic rim and honeycomb appearance. The maximum diameters of nodules and thickness of hypoechoic rim were measured. US characteristics relevant as predictors were identified using a Chi-square or Fisher's exact test and odds ratio. We compared the diagnostic efficacy of 3 US criteria for FNA indication. Results: Microcalcification, taller-than-wide shape, marked hypoechogenecity, hypoechogenecity, coarse calcification, irregular shape and spiculated margin were significant characteristics of malignant nodules. Isoechogenecity, hypoechoic rim and honeycomb appearance was significant characteristics of benign nodules. Rim or arc calcification, hyperechogenecity and thickness of hypoechoic rim were insignificant. Among 3 US criteria for FNA indication, NFI showed the highest diagnostic efficacy, 98.0% in sensitivity, 75.0% in specificity and 150.0 in odds ratio. Conclusion: As for nonpalpable thyroid nodules 1–2 cm in diameter, US characteristics are useful for differentiating between malignant and benign nodules. Malignant US characteristics and honeycombing appearance have significant value in selecting nodules for biopsy and reducing the frequency of the FNA procedure.

Surface resistances of 5-cm-diameter YBCO films prepared by MOD for microwave applications

International Nuclear Information System (INIS)

Manabe, T.; Sohma, M.; Yamaguchi, I.; Tsukada, K.; Kondo, W.; Kamiya, K.; Tsuchiya, T.; Mizuta, S.; Kumagai, T.

2006-01-01

Large-area high-T c superconducting films with low surface resistances R s are required for use in microwave applications such as band pass filters. In this paper, preparation of 5-cm-diameter YBCO films on LaAlO 3 (LAO) and CeO 2 -buffered sapphire (CbS) substrates by metalorganic deposition (MOD) using a fluorine-free coating solution and their superconducting properties are described. The optimum firing conditions for YBCO films greatly depend on the substrate materials; a heating rate at ramp as high as 200 deg. C /min is necessary for films on LAO whereas a lower heating rate, e.g., 20 deg. C /min, is required for films on CbS. Accordingly, the suitable furnace systems for these substrates have been varied. As a result, a YBCO film with high J c (77 K) of 2.7 MA/cm 2 and a low R s (12 GHz, 77 K) of 0.54 mΩ was prepared on LAO by using an infrared image furnace. On the other hand, a YBCO film with a higher J c (77 K) of 4.0 MA/cm 2 and the same R s (12 GHz, 77 K) of 0.54 mΩ was prepared on CbS by using a tube furnace

Relationship of stump diameter to d.b.h. for white pine in the northeast

Science.gov (United States)

Jesse D. Diller

1954-01-01

A need to estimate the volume cut from a timber tract when only the stumps are left is often felt by foresters, timber operators, and landowners. This need arises in areas where timber sales are based on stump diameters, in timber trespass cases, in check cruises on marked timber sales (to determine volume cut from unmarked trees), and as an aid in piecing together the...

Differential in vivo regulation of TH and DBH mRNA in rat atria by maprotiline and fluoxetine

Directory of Open Access Journals (Sweden)

Spasojević Nataša

2011-01-01

Full Text Available It is well known that antidepressants affect central monoaminergic neurotransmission and that they also modulate hormone release in peripheral tissues. Repeated maprotiline (a noradrenaline reuptake inhibitor and fluoxetine (a serotonin reuptake inhibitor treatment on gene expression of the catecholamine biosynthetic enzymes were examined in rat atria and ventricles in vivo. Maprotiline decreased the gene expression of tyrosine hydroxylase (TH and dopamineβ-hydroxylase (DBH in the rat atrium. Fluoxetine increased gene expression of TH and DBH, but not of phenylethanolamine N-methyltransferase (PNMT. Chronic application of antidepressants did not change the expression of these enzymes in the ventricles. We conclude that repeated administration of fluoxetine enhances gene transcription of TH and DBH and subsequently stimulates noradrenaline synthesis in rat atria in vivo.

Crescimento de canela-lageana, Ocotea pulchella Nees et Mart. ex Nees, na Depressão Central do estado do Rio Grande do Sul

Directory of Open Access Journals (Sweden)

Luciano Scheeren Weber

2003-01-01

Full Text Available This work had as objectives the study of the growth in DBH, commercial volume (CV, current annual increment in percentage of the commercial volume (CAI and the determination of the commercial form factor (f for Ocotea pulchella Nees et Mart. ex Nees, in the Central Depression of the Rio Grande do Sul State. The growth data were tested with three mathematical equations, for the adjustment of diameter and commercial volume without bark. The quadratic equation resulted as a more efficient model, for the CV and DBH estimate, adjusted in function of the age of the trees. The Backman equation was selected for the CAI and for the f estimate. The values were determined in function of the DBH to facilitate practical application. The commercial form factor varied from 0,40 for a DBH of 5 cm to a maximum value of 0,85 for a DBH from 22 to 32 cm, decreasing up to 0,78 at 51 cm of DBH, between the ages of 10 and 100 years. The average annual increment in percentage of the commercial volume varied from 17,48% for 10 years to 1,33% for 100 years of age. The species presented a good growth potential, that associated with management practices can increase its productivity.

Allometric Equations for Estimating Carbon Stocks in Natural Forest in New Zealand

Directory of Open Access Journals (Sweden)

Andrea Brandon

2012-09-01

Full Text Available Species-specific and mixed-species volume and above ground biomass allometric equations were developed for 15 indigenous tree species and four tree fern species in New Zealand. A mixed-species tree equation based on breast height diameter (DBH and tree height (H provided acceptable estimates of stem plus branch (>10 cm in diameter over bark volume, which was multiplied by live tree density to estimate dry matter. For dead standing spars, DBH, estimated original height, actual spar height and compatible volume/taper functions provided estimates of dead stem volume, which was multiplied by live tree density and a density modifier based on log decay class from field assessments to estimate dry matter. Live tree density was estimated using ratio estimators. Ratio estimators were based on biomass sample trees, and utilized density data from outerwood basic density surveys which were available for 35 tree species sampled throughout New Zealand. Foliage and branch ( < 10 cm in diameter over bark dry matter were estimated directly from tree DBH. Tree fern above ground dry matter was estimated using allometric equations based on DBH and H. Due to insufficient data, below ground carbon for trees was estimated using the default IPCC root/shoot ratio of 25%, but for tree ferns it was estimated using measured root/shoot ratios which averaged 20%.

Azadirachtin: an effective systemic insecticide for control of Agrilus planipennis (Coleoptera: Buprestidae).

Science.gov (United States)

McKenzie, Nicole; Helson, Blair; Thompson, Dean; Otis, Gard; McFarlane, John; Buscarini, Teresa; Meating, Joe

2010-06-01

The emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), an invasive pest discovered in North America in 2002, is now well established and threatens ash (Fraxinus spp.) trees throughout the continent. Experiments were conducted to 1) examine the efficacy of an alternative natural pesticide, azadirachtin, to control emerald ash borer, and 2) determine foliar uptake and dissipation patterns after systemic injections of azadirachtin into trunks of small (2.2 cm diameter at breast height [dbh]), uninfested green ash trees. We found no evidence of mortality of adult beetles. In contrast, fewer larvae completed their development at dose levels > or = 1.7 mg (AI)/cm dbh and development ceased beyond the second instar at dose levels > or = 13.6 mg (AI)/cm dbh. Substantial concentrations (11.2 microg/g dry mass [SD = 7.55]) of azadirachtin were present in leaves within 7 d of treatment. After rapid initial uptake, concentrations in leaves declined logarithmically during the 55 d after injection. A similar pattern was observed in a separate experiment that examined the uptake and translocation of azadirachtin in larger green ash trees (22 cm dbh) treated with 250 mg (AI) /cm dbh with the EcoJect injection system. In another experiment, recently infested plantation green ash trees treated with doses > or = 40 mg (AI)/cm dbh had significant reductions in adult emergence approximately 1 yr postinjection. Given the inhibition of larval development, reduction of adult emergence, and the occurrence of foliar residues at biologically active concentrations, we conclude that azadirachtin is effective in protecting ash trees from emerald ash borer.

Forest structure, diversity and soil properties in a dry tropical forest in Rajasthan, Western India

OpenAIRE

J. I. Nirmal Kumar,; Kanti Patel,; Rohit Bhoi Kumar

2011-01-01

Structure, species composition, and soil properties of a dry tropical forest in Rajasthan Western India, were examined by establishment of 25 plots. The forest was characterized by a relatively low canopy and a large number of small-diameter trees. Mean canopy height for this forest was 10 m and stands contained an average of 995 stems ha-1 (≥ 3.0 cm DBH); 52% of those stems were smaller than 10 cm DBH. The total basal area was 46.35 m2ha-1, of which Tectona grandis L. contributed 48%. The fo...

[Indication for limited surgery on small lung cancer tumors measuring 1cm or less in diameter on preoperative computed tomography and long-term results].

Science.gov (United States)

Togashi, K; Koike, T; Emura, I; Usuda, H

2008-07-01

Non-invasive lung cancers showed a good prognosis after limited surgery. But it is still uncertain about invasive lung cancers. We investigated the indications for limited surgery for small lung cancer tumors measuring 1 cm or less in diameter on preoperative computed tomography (CT). This study retrospectively analyzed of 1,245 patients who underwent complete resection of lung cancer between 1989 and 2004 in our hospital. Sixty-two patients (5%) had tumors measuring 1 cm or less in diameter. The probability of survival was calculated using the Kaplan-Meier method. All diseases were detected by medical checkup, 52 % of the patients were not definitively diagnosed with lung cancer before surgery. Adenocarcinoma was histologically diagnosed in 49 patients (79%). Other histologic types included squamous cell carcinoma (8), large cell carcinoma (1), small cell carcinoma (1), carcinoid (2), and adenosquamous cell carcinoma (1). Fifty-seven patients (92%) showed pathologic stage IA. The other stages were IB (2), IIA (1), and IIIB (2). There were 14 bronchioloalveolar carcinomas (25% of IA diseases). The 5-year survival rates of IA patients were 90%. The 5-year survival rate of patients with tumors measuring 1cm or less diameter was 91% after lobectomy or pneumonectomy, and 90% after wedge resection or segmentectomy. There were 3 deaths from cancer recurrence, while there were no deaths in 14 patients with bronchioloalveolar carcinoma After limited surgery, non-invasive cancer showed good long-term results, while invasive cancer showed a recurrence rate of 2.3% to 79% even though the tumor measured 1 cm or less in diameter on preoperative CT.

A technique to identify annual growth rings in Eucalyptus grandis using annual measurements of diameter at breast height and gamma ray densitometry

CSIR Research Space (South Africa)

Naidoo, Sasha

2010-06-01

Full Text Available A technique was developed to identify annual growth rings in E. grandis using a combination of annual measurements of diameter at breast height (DBH) from permanent sample plot (PSP) datasets and bark-pith density profiles. By assessing the pattern...

Biomass, stem basic density and expansion factor functions for five exotic conifers grown in Denmark

DEFF Research Database (Denmark)

Nord-Larsen, Thomas; Nielsen, Anders Tærø

2015-01-01

Adequate allometric equations are needed for estimating carbon pools of fast growing tree species in relation to international reporting of CO2 emissions and for assessing their possible contribution to increasing forest biomass resources. We developed models for predicting biomass, stem basic...... decreased from 1.8–2.0 in small trees (dbh 25 cm), but differed among species. The overall model explained 86% of the variation and included quadratic mean diameter and dbh....

interfaces of regeneration, structure, diversity and uses of some ...

African Journals Online (AJOL)

ADMIN

Individuals attaining 150 cm and above in height but less than 10 cm in diameter at breast height (DBH) were ... Key words/phrases: Bonga Forest, regeneration, structure, threat, uses. ∗ Author to ... highly dissected plateau, with flat to moderately undulating ... and management of Ethiopian soils is given in. Mesfin Abebe ...

Different Patterns of Changes in the Dry Season Diameter at Breast Height of Dominant and Evergreen Tree Species in a Mature Subtropical Forest in South China

Institute of Scientific and Technical Information of China (English)

Jun-Hua Yan; Guo-Yi Zhou; De-Qiang Zhang; Xu-Li Tang; Xu Wang

2006-01-01

Information on changes in diameter at breast height (DBH) is important for net primary production (NPP)estimates, timing of forest inventory, and forest management. In the present study, patterns of DBH change were measured under field conditions during the dry season for three dominant and native tree species in a monsoon evergreen broad-leaved forest in the Dinghushan Biosphere Reserve. For each tree species,different patterns of DBH change were observed. In the case of the fast-growing tree species Castanopsis chinensis Hance, large diurnal fluctuations occur, with a peak DBH in the early morning (around 05:00 h) that decreases to a minimum by about 14:00 h. Both Schima superba Gardn. et Chemp and Cryptocarya chinensis (Hance) Hemsl. exhibited less diurnal swelling and shrinkage. Diurnal fluctuations for these species were observed on a few occasions over the period of observation. Graphical comparisons and statistical analysis of changes in DBH with meteorological variables indicate that for different trees, the different changes in DBH observed responded to different meteorological variables. Large stem changes were found to occur for Ca. chinensis trees that were associated with variations in solar radiation. However, both S. superba and Cr. chinensis were found to be less sensitive to solar radiation. Changes in the DBH of these two species were found to be controlled mainly by soil temperature and soil moisture. During the later dry season, with a lower soil temperature and soil moisture, all three tree species stopped growing and only negligible shrinkage, expansion, or fluctuation occurred, suggesting that the optimum time to measure tree growth in the Dinghushan Biosphere Reserve is the later dry season.

Diametric growth and time of passage of Minquartia guianensis after logging at Tapajós National Forest, Brazil

Directory of Open Access Journals (Sweden)

Cinthia Grazielle Carvalho Andrade

2017-09-01

Full Text Available Minquartia guianensis Aubl. (acariquara occurs at Acre, Amazonas, Roraima, Pará and Amapá states, with a great market demand and utility in the Amazon region. It is used mainly in civil construction due to its high durability and singular beauty, because of reentrances in its trunk, resulting in high market value. Most of used trees present small diameters, what is a critical factor for their management and commercialization. Thus, the objective of this study was to evaluate M. guianensis diametric growth and cutting cycle through the analysis of time of passage among diameter classes, 31 years after logging, at Tapajós National Forest, Pará State, Brazil. Five treatments were established and in each one 12 permanent sample plots of 0.25 ha were installed. All trees with diameter at 1.3 m above ground level (DBH ≥ 5 cm were measured from 1981 to 2012. Trees with DBH ≤ 50 cm have potential to be managed, due to the growth stagnation presented in larger diameter classes. These results may support silvicultural decisions to sustainable management.

Relative lack of regeneration of shade-intolerant canopy species in some South African forests

CSIR Research Space (South Africa)

Midgley, JJ

1995-01-01

Full Text Available Some species such as Celtis Africana, are experiencing relative recruitment bottlenecks, because there are usually fewer recruits [i.e. individuals <20 cm diameter at breast height, (dbh)] than canopy individuals. The species with low recruitment...

Approximation of the breast height diameter distribution of two-cohort stands by mixture models III Kernel density estimators vs mixture models

Science.gov (United States)

Rafal Podlaski; Francis A. Roesch

2014-01-01

Two-component mixtures of either the Weibull distribution or the gamma distribution and the kernel density estimator were used for describing the diameter at breast height (dbh) empirical distributions of two-cohort stands. The data consisted of study plots from the Å wietokrzyski National Park (central Poland) and areas close to and including the North Carolina section...

Allometric Models Based on Bayesian Frameworks Give Better Estimates of Aboveground Biomass in the Miombo Woodlands

Directory of Open Access Journals (Sweden)

Shem Kuyah

2016-02-01

Full Text Available The miombo woodland is the most extensive dry forest in the world, with the potential to store substantial amounts of biomass carbon. Efforts to obtain accurate estimates of carbon stocks in the miombo woodlands are limited by a general lack of biomass estimation models (BEMs. This study aimed to evaluate the accuracy of most commonly employed allometric models for estimating aboveground biomass (AGB in miombo woodlands, and to develop new models that enable more accurate estimation of biomass in the miombo woodlands. A generalizable mixed-species allometric model was developed from 88 trees belonging to 33 species ranging in diameter at breast height (DBH from 5 to 105 cm using Bayesian estimation. A power law model with DBH alone performed better than both a polynomial model with DBH and the square of DBH, and models including height and crown area as additional variables along with DBH. The accuracy of estimates from published models varied across different sites and trees of different diameter classes, and was lower than estimates from our model. The model developed in this study can be used to establish conservative carbon stocks required to determine avoided emissions in performance-based payment schemes, for example in afforestation and reforestation activities.

Tannins gravimetric yield condensed in Anadenanthera peregrina bark in different diameter classes

Directory of Open Access Journals (Sweden)

Caroline Junqueira Sartori

2014-06-01

Full Text Available This work aimed to determine the gravimetric yield of condensed tannins in the Anadenanthera peregrina bark in different diameter classes. Fifty-nine trees samples were collected of Anadenanthera peregrina, at 1.30m of the ground (diameter at breast height - DBH, distributed in seven diameter classes. The barks were dried and crushed in mill of hammer. Composite sample was made to prepare the extract. The extraction was done using water in the ratio 15:1 (v/w, added 3% sodium sulfite (w/w in water-bath at 70°C for 4 hours. The material was filtered using fine cloth strainer and concentrated on a heating plate at approximately 150 g. It was determined the extract mass and removed 10 g for obtaining solids content and 20g for the Stiasny's index. The average values of total solids content, Stiasny's index, condensed tannin content and the compound content non-tannin were 11.34%; 75.79%; 12.76% and 4.07%, respectively. The content of solids, Stiasny's index, compound content non-tannin show significant differences between diameter classes. For the condensed tannins production, the diameter class parameter there was no influence.

Accuracy of a dose-area product compared to an absorbed dose to water at a point in a 2 cm diameter field

Energy Technology Data Exchange (ETDEWEB)

Dufreneix, S.; Ostrowsky, A.; Rapp, B.; Daures, J.; Bordy, J. M., E-mail: jean-marc.bordy@cea.fr [CEA, LIST, Laboratoire National Henri Becquerel (LNE-LNHB), Gif-sur-Yvette F-91191 (France)

2016-07-15

Purpose: Graphite calorimeters with a core diameter larger than the beam can be used to establish dosimetric references in small fields. The dose-area product (DAP) measured can theoretically be linked to an absorbed dose at a point by the determination of a profile correction. This study aims at comparing the DAP-based protocol to the usual absorbed dose at a point protocol in a 2 cm diameter field for which both references exist. Methods: Two calorimeters were used, respectively, with a sensitive volume of 0.6 cm (for the absorbed dose at a point measurement) and 3 cm diameter (for the DAP measurement). Profile correction was calculated from a 2D dose mapping using three detectors: a PinPoint chamber, a synthetic diamond, and EBT3 films. A specific protocol to read EBT3 films was implemented and the dose-rate and energy dependences were studied to assure a precise measurement, especially in the penumbra and out-of-field regions. Results: EBT3 films were found independent on dose rates over the range studied but showed a strong under-response (18%) at low energies. Depending on the dosimeter used for calculating the profile correction, a deviation of 0.8% (PinPoint chamber), 0.9% (diamond), or 1.9% (EBT3 films) was observed between the calibration coefficient derived from DAP measurements and the one directly established in terms of absorbed dose to water at a point. Conclusions: The DAP method can currently be linked to the classical dosimetric reference system based in an absorbed dose at a point only with a confidence interval of 95% (k = 2). None of the detectors studied can be used to determine an absorbed dose to water at a point from a DAP measurement with an uncertainty smaller than 1.2%.

Determination of iodide with 1,3-dibromo-5,5-dimethylhydantoin (DBH) in comparison with the ICl-method. Analytical methods of pharmacopeias with DBH in respect to environmental and economical concern. Part 3.

Science.gov (United States)

Hilp, M; Senjuk, S

2001-06-01

USP 1995 (The United States Pharmacopeia, 23rd Edit., (1995), potassium iodide p. 1265, sodium iodide p. 1424), PH. EUR. 1997 (European Pharmacopoeia, third ed., Council of Europe, Strasbourg, (1997), potassium iodide p. 1367, sodium iodide p. 1493) and JAP 1996 (The Japanes Pharmacopoeia, 13th ed. (1996), potassium iodide p. 578, sodium iodide p. 630) determine iodide with the ICl-method (J. Am. Chem. Soc. 25 (1903) 756-761; Z. Anorg. Chem. 36 (1903) 76-83; Fresenius Z. Anal. Chem. 106 (1936) 12-23; Arzneibuch-Kommentar, Wissenschaftliche Erläuterungen zum Europäischen Arzneibuch, Wissenschaftliche Verlagsgesellschaft mbH, Stuttgart, Govi-Verlag - Pharmazeutischer Verlag GmbH, Eschborn, 12th suppl. (1999), K10 p. 2), using chloroform, which is toxic and hazardous to environment. Without the application of chlorinated hydrocarbons USP 2000 (The United State Pharmacopeia, 24th ed. (2000), potassium iodide p. 1368, sodium iodide p. 1535) and Brit 1999 (British Pharmacopoeia London, (1999), Appendix VIII C, p. A162) titrate iodide with the redox indicator amaranth. A titration with potentiometric indication giving two end-points at the step of I(2) and [ICl(2)](-) is described. Due to the high concentration of hydrochloric acid required for the ICl-method, the determination with DBH (1,3-dibromo-5,5-dimethylhydantoin; 1,3-dibromo-5,5-dimethyl-2,4-imidazolidinedione) can be recommended and is performed easily. Similarly, the iodide content of gallamine triethiodide may be analyzed with DBH by application of a visual two-phase titration in water and ethyl acetate or with potentiometric indication in a mixture of 2-propanol and water. During the removal of the excess of DBH 4-bromo-triethylgallamine (2,2',2"-[1-bromo-benzene-2,3,4-triyltris(oxy)]N,N,N-triethylethanium) is formed.

Crescimento do louro-pardo, Cordia trichotoma (Vell. Arrab. ex Steud., na depressã o central do estado do Rio Grande do Sul

Directory of Open Access Journals (Sweden)

Luciano Scheeren Weber

2002-01-01

Full Text Available This work had as objectives the study of the growth in DBH, commercial volume, average of annual increment in percentage of the commercial volume and the determination of the commercial form factor for Cordia trichotoma (Vell. Arrab. ex steud., in the Central Depression of the Rio Grande do Sul State. The growth data were tested with three mathematical equations, for the adjustment of diameter and commercial volume without bark. The Backman equation resulted as the most efficient model, adjusted in function of the age of the trees. This equation also was selected for the adjustment of the average annual increment in percentage of the commercial volume, adjusted in function of DBH. For the commercial form factor the best equation was the quadratic and the values were determined in function of the DBH to facilitate the practical application. The commercial form factor varied from 0,34 for a DBH of 7 cm to a maximum value of 0,78 for a DBH around 37,1 cm, at the ages of 20 and 88 years respectively. The current annual increment in percentage of the commercial volume varied from 18,05% for 20 years to 2,22% for 88 years of age.

Mangrove Forest Structure in Ungwana Bay, Kenya

International Nuclear Information System (INIS)

Bundotich, G; Karacchi, M.; Kairo, J.G.

2007-01-01

Forest structure and natural regeneration was investigated in a 12-year-old Rhizophoria reforested stand at Gazi bay, Kenya. Within 10* 10m 2 plots, tree height and stem diameter at breast height (DBH) of all trees of DBH>2.5 cm were determined. Stand volume was estimated by allometric equations derived from 50 harvested trees. The composition of juveniles was determined by within 5*5 m 2 inside the 10 * 10 plots. The stand density in Rhizophora plantation was 5,132 stems ha - 1, with a mean canopy height and stem diameter of 8.4+ 1 .1 m (range: 3.0 to 11.0 m) and 6.2+ 1 .87 cm (range: 2.5 to 12.4 cm) respectively. The stand volume was 103.80 m 3 ha-1 , stilt roots and branches combined was 43.09 m 3 ha-1 . Five species with juveniles; Rhizophora mucronata, Bruguieria gymnorrhiza, Ceriops tagal, Sonneretia alba and Xylocarpus granatum, were encountered with density of 4 886 juveniles ha-1 , with clustered distribution pattern

Lack of Association between Dopamine Beta-Hydroxylase (DBH 19-bp Insertion/Deletion Polymorphism and Risk of Schizophrenia

Directory of Open Access Journals (Sweden)

Mansour shakiba

2016-12-01

Full Text Available Objective: Interaction between genetic and environmental factors is considered as major factors in Schizophrenia (SCZ. It has been shown that dopaminergic and noradrenergic neurotransmission dysfunction play an essential role in the SCZ pathogenesis.This study aimed to find the impact of functional 19-bp insertion/deletion (ins/del polymorphism in dopamine beta-hydroxylase (DBH gene on SCZ risk in a sample of Iranian population.Method: This case-control study was conducted on 109 SCZ patients and 116 matched healthy subjects. Genomic DNA samples were extracted from peripheral blood cells using salting out method. Genotyping of 19-bp ins/del DBH polymorphism was done using Polymerase Chain Reaction (PCR method.Results: Neither the overall chi-square comparison of cases and controls (

Radiofrequency Ablation Using a Multiple-Electrode Switching System for Lung Tumors with 2.0-5.0-cm Maximum Diameter: Phase II Clinical Study.

Science.gov (United States)

Kodama, Hiroshi; Yamakado, Koichiro; Hasegawa, Takaaki; Fujimori, Masashi; Yamanaka, Takashi; Takaki, Haruyuki; Uraki, Junji; Nakatsuka, Atsuhiro; Sakuma, Hajime

2015-12-01

To prospectively evaluate the safety and effectiveness of radiofrequency ablation (RFA) by using a multiple-electrode switching system to treat 2.0-5.0-cm lung tumors. The institutional review board approved this prospective phase II study. Written informed consent was obtained from all patients. Between September 2009 and July 2011, RFA using two or three radiofrequency (RF) electrodes and a multiple-electrode switching system was performed for malignant lung tumors with a maximum tumor diameter of 2.0-5.0 cm in nonsurgical candidates. The primary endpoint was safety, as evaluated using the Common Terminology Criteria for Adverse Events. Patients were observed for at least 1 year. Local tumor progression and overall survival were analyzed with the Kaplan-Meier method. Thirty-three patients (26 men, seven women; mean age, 70.5 years ± 10.0; age range, 46-87 years) with 35 lung tumors with a mean maximum diameter of 3.0 cm ± 0.7 (standard deviation; range, 2.0-4.4 cm) underwent treatment in 35 sessions. No procedure-related death or grade 4 adverse events (AEs) occurred. Grade 3 AEs occurred in four patients (12%), with pleural effusion requiring chest tube placement in two patients, pneumothorax requiring pleural adhesion in one patient, and pulmonary hemorrhage requiring pulmonary artery coil embolization in one patient. Grade 2 AEs were detected in 13 patients (39%). The 1-year local tumor progression and overall survival rates were 12.7% (95% confidence interval [CI]: 1.0, 25.5) and 81.2% (95% CI: 67.6, 94.8). RFA with a multiple-electrode switching system may be a safe therapeutic option with which to treat 2.0-5.0-cm lung cancer tumors.

The effects of logging on the architecture of Bornean rainforest trees

NARCIS (Netherlands)

Sterck, F.J.; Hille Ris Lamberis, R.; Bongers, F.J.J.M.

2003-01-01

Tree parameters were compared between trees in a logged (logged eight years ago) and an unlogged forest in Borneo. This comparison was made for 3 to 10 cm diameter at breast height (dbh) trees of four tree species, namely, Mallotus penangensis, M. wrayi, Shorea johorensis and S. parvifolia. The

Tree species Diversity in the Department of Forest Resources ...

African Journals Online (AJOL)

An inventory of trees (>10cm diameter at breast height (dbh)) growing within the premises (~1.2ha) of the Department of Forest Resources Management (DFRM), University of Ibadan, Nigeria, was conducted as a case study of the species quality (richness and diversity) and quantity (volume) found on the University campus.

Growth modeling of Cryptomeria japonica by partial trunk analysis

Directory of Open Access Journals (Sweden)

Vinícius Morais Coutinho

2017-06-01

Full Text Available This study aimed to evaluate the growth pattern of Cryptomeria japonica increment (L. F. D. Don. and to describe the probability distribution in stands stablished at the municipality of Rio Negro, Paraná State. Twenty trees were sampled in a 34 years-old stand, with 3 m x 2 m spacing. Wood disks were taken from each tree at 1.3 m above the ground (DBH to perform partial stem analysis. Diameter growth series without bark were used to generate the average cumulative growth curves for DBH (cm, mean annual increment (MAI and current annual increment (CAI. From the increment data, the frequency distribution was evaluated by means of probability density functions (pdfs. The mean annual increment for DBH was 0.78 cm year-1 and the age of intersection of CAI and MAI curves was between the 7th and 8th years. It was found that near 43% of the species increments are concentrated bellow 0.5 cm. The results are useful to define appropriate management strategies for the species for sites similar to the studying regions, defining for example ages of silvicultural intervention, such as thinning.

Hepatocellular carcinomas 2–3 cm in diameter: Transarterial chemoembolization plus radiofrequency ablation vs. radiofrequency ablation alone

International Nuclear Information System (INIS)

Kim, Jong Woo; Kim, Jin Hyoung; Won, Hyung Jin; Shin, Yong Moon; Yoon, Hyun-Ki; Sung, Kyu-Bo; Kim, Pyo Nyun

2012-01-01

Objective: There is debate whether transarterial chemoembolization (TACE) plus radiofrequency ablation (RFA) is more effective than RFA alone in the treatment of patients with small hepatocellular carcinoma (HCC). We therefore retrospectively compared these treatments in patients with HCCs of diameter 2–3 cm. Materials and methods: Outcomes, including tumor progression, survival rates, and major complications, were compared in 83 patients (83 tumors) treated with combined TACE and RFA and in 231 patients (231 tumors) treated with RFA alone. Results: Median follow-up periods were similar in the TACE + RFA and RFA alone groups (37 vs. 38 months). During follow-up, local tumor progression was observed in 16% and 41% of tumors, respectively. The 1, 3, and 5 year local tumor progression-free survival rates were significantly higher in the TACE + RFA group (95%, 86%, and 83%, respectively) than in the RFA-alone group (78%, 61%, and 53%, respectively; P < 0.001). The 1, 3, and 5 year overall survival rates, however, were similar in the TACE + RFA (93%, 72%, and 63%, respectively) and RFA (93%, 73%, and 53%, respectively) groups (P = 0.545), as were the rates of major complications (1.2% vs. 0.4%). Conclusions: Combined TACE and RFA was safe and provided better local tumor control than RFA alone in the treatment of 2- to 3-cm sized HCCs, although survival rates were similar.

Evaluation of flora diversity and abundance in Awba Dam Tourism ...

African Journals Online (AJOL)

The study evaluated flora diversity and abundance in Awba Dam Tourism Centre, Ibadan, Nigeria. Complete enumeration of trees (>10cm diameter at breast height (dbh)), saplings, and small trees growing within 50m radius of the Awba dam was carried out. The percentage canopy cover of tree species (to the nearest 5%) ...

Gamma Knife radiosurgery for large vestibular schwannomas greater than 3 cm in diameter.

Science.gov (United States)

Huang, Cheng-Wei; Tu, Hsien-Tang; Chuang, Chun-Yi; Chang, Cheng-Siu; Chou, Hsi-Hsien; Lee, Ming-Tsung; Huang, Chuan-Fu

2018-05-01

OBJECTIVE Stereotactic radiosurgery (SRS) is an important alternative management option for patients with small- and medium-sized vestibular schwannomas (VSs). Its use in the treatment of large tumors, however, is still being debated. The authors reviewed their recent experience to assess the potential role of SRS in larger-sized VSs. METHODS Between 2000 and 2014, 35 patients with large VSs, defined as having both a single dimension > 3 cm and a volume > 10 cm 3 , underwent Gamma Knife radiosurgery (GKRS). Nine patients (25.7%) had previously undergone resection. The median total volume covered in this group of patients was 14.8 cm 3 (range 10.3-24.5 cm 3 ). The median tumor margin dose was 11 Gy (range 10-12 Gy). RESULTS The median follow-up duration was 48 months (range 6-156 months). All 35 patients had regular MRI follow-up examinations. Twenty tumors (57.1%) had a volume reduction of greater than 50%, 5 (14.3%) had a volume reduction of 15%-50%, 5 (14.3%) were stable in size (volume change 3 cm and a volume > 10 cm 3 and tolerable mass effect can be managed satisfactorily with GKRS. Tumor volume ≥ 15 cm 3 is a significant factor predicting poor tumor control following GKRS.

A Preliminary Study of DBH (Encoding Dopamine Beta-Hydroxylase) Genetic Variation and Neural Correlates of Emotional and Motivational Processing in Individuals With and Without Pathological Gambling.

Science.gov (United States)

Yang, Bao-Zhu; Balodis, Iris M; Lacadie, Cheryl M; Xu, Jiansong; Potenza, Marc N

2016-06-01

Background and aims Corticostriatal-limbic neurocircuitry, emotional and motivational processing, dopaminergic and noradrenergic systems and genetic factors have all been implicated in pathological gambling (PG). However, allelic variants of genes influencing dopaminergic and noradrenergic neurotransmitters have not been investigated with respect to the neural correlates of emotional and motivational states in PG. Dopamine beta-hydroxylase (DBH) converts dopamine to norepinephrine; the T allele of a functional single-nucleotide polymorphism rs1611115 (C-1021T) in the DBH gene is associated with less DBH activity and has been linked to emotional processes and addiction. Here, we investigate the influence of rs1611115 on the neural correlates of emotional and motivational processing in PG and healthy comparison (HC) participants. Methods While undergoing functional magnetic resonance imaging, 18 PG and 25 HC participants, all European Americans, viewed gambling-, sad-, and cocaine-related videotapes. Analyses focused on brain activation differences related to DBH genotype (CC/T-carrier [i.e., CT and TT]) and condition (sad/gambling/cocaine). Results CC participants demonstrated greater recruitment of corticostriatal-limbic regions, relative to T-carriers. DBH variants were also associated with altered corticostriatal-limbic activations across the different videotape conditions, and this association appeared to be driven by greater activation in CC participants relative to T-carriers during the sad condition. CC relative to T-carrier subjects also reported greater subjective sadness to the sad videotapes. Conclusions Individual differences in genetic composition linked to aminergic function contribute significantly to emotional regulation across diagnostic groups and warrant further investigation in PG.

Estimation of diameter and height of individual trees for Pinus sylvestris L. based on the individualising of crowns using airborne LiDAR and the National Forestry Inventory data

Energy Technology Data Exchange (ETDEWEB)

Valbuena-Rabadán, M.A.; Santamaría-Peña, J.; Sanz-Adán, F.

2016-07-01

Aim of the study: The objective of this study is to test the validity of the DBH and total height allometric models fitted to the crown polygon data obtained by the application of a crown delineation and individualisation algorithm which uses the geometrical relationships between the points in the original LiDAR point clouds in the Pinus sylvestris L. stands. Area of study: The study area is located in the province of Álava in the Autonomous Community of the Basque Country. Material and Methods: The crowns are delineated using data from airborne LiDAR point clouds obtained in the 2008 overflight of the Basque Autonomous Community. The DBH and total height data for field trees are obtained from the plots in the 4th National forest inventory. Main Results: For the adjusted total height and DBH models coefficients of determination of 0.87 and 0.74 respectively were obtained. The root mean squared errors were 10.67% and 18.97% respectively. The distributions of obtained DBH and total height fitted values and the distributions of the DBH and total height of the field trees are very similar except for the DBH below 15 cm. Research highlights: For stands of Pinus sylvestris L. in Álava, the geometrical relationships between the points that correspond to laser signal echoes obtained with airborne LiDAR sensors can be used directly to delineate approximations of the horizontal projections of the crowns of the trees. Although the procedure set out here was developed for stands of P. sylvestris L. in Álava, it can be applied to other conifers in regular stands by adjusting the working parameters of the function which delineates the crowns on the basis of the point cloud. (Author)

The Effect of Different Competition Indices on Diameter Growth of Individual Tree Growth in Mixed Stands of Caucasion fir and Oriental spruce

Directory of Open Access Journals (Sweden)

Aydın Kahriman

2012-11-01

Full Text Available The aim of this study is to investigate statistical relations between each of 12 competition indices (both distance-dependent and distance-independent and diameter growth of trees. Also we investigated the relations between each of 12 competition indices together with diameter at breast height and diameter growth. For that reason, six sampling plots (ranging from 1000 to 2000 m2 in size were taken from in mixed stands of Caucasion fir and Oriental spruce located within the Forest Management Districts of Torul and Artvin. Our results from those sampling plots were in agreement with general growth models. Regression analysis between each of competition indexes and diameter growth resulted in coefficients of determination (R2 values ranging from 30 to 64%. The distance-dependent competition indices gave stronger correlations with diameter growth than the distance-independent competition indexes. Coefficients of determination were even higher when competition indexes and dbh were used together as independent variables (R2 = 0.31 - 0.82.

Biomass equations for Brazilian semiarid caatinga plants Equações para estimar a biomassa de plantas da caatinga do semi-árido brasileiro

Directory of Open Access Journals (Sweden)

Everardo V.S.B. Sampaio

2005-12-01

Full Text Available Allometric equations to estimate total aboveground alive biomass (B or crown projection area (C of ten caatinga species based on plant height (H and/or stem diameter at ground level (DGL or at breast height (DBH were developed. Thirty plants of each species, covering the common range of stem diameters (3 to 50 cm, were measured (C, H, DGL, DBH, cut at the base, separated into parts, weighted and subsampled to determine dry biomass. Wood density (p of the stem and the largest branches was determined. B, C, H and p ranged from 1 to 500 kg, 0.2 to 112 m², 1.3 to 11.8 m, and 0.45 to 1.03 g cm-3. Biomass of all 10 species, separately or together (excluding one cactus species, could be estimated with high coefficients of determination (R² using the power equation (B = aDGLb and DGL, DBH, H or combinations of diameter, height and density. Improvement by multiplying H and/or p to DGL or DBH was small. The mixed-species equation based only on DBH (valid up to 30 cm had a = 0.173 and b = 2.295, similar to averages of these parameters found in the literature but slightly lower than most of those for humid tropical vegetation. Crown area was significantly related to diameter, height and biomass.Equações alométricas foram desenvolvidas para estimar a biomassa aérea viva (B e a área de projeção da copa (C de dez espécies da caatinga, com base na altura da planta (H e/ou do diâmetro do caule ao nível do solo (DNS ou à altura do peito (DAP. Trinta plantas de cada espécie, cobrindo a faixa usual de diâmetros (3 a 50 cm, foram medidas (C, H, DNS, DAP, cortadas na base, separadas em partes, pesadas e subamostradas para determinação da biomassa seca. A densidade (p da madeira dos caules e galhos maiores foi determinada. B, C, H e p variaram de 1 a 500 kg, 0,2 a 112 m², 1,3 a 11,8 m e 0,45 a 1,03 g cm-3. A biomassa das 10 espécies, separadamente ou em conjunto (exceto pela espécie de Cactaceae, foi estimada com alto coeficiente de determina

Automatic Mapping of Forest Stands Based on Three-Dimensional Point Clouds Derived from Terrestrial Laser-Scanning

Directory of Open Access Journals (Sweden)

Tim Ritter

2017-07-01

Full Text Available Mapping of exact tree positions can be regarded as a crucial task of field work associated with forest monitoring, especially on intensive research plots. We propose a two-stage density clustering approach for the automatic mapping of tree positions, and an algorithm for automatic tree diameter estimates based on terrestrial laser-scanning (TLS point cloud data sampled under limited sighting conditions. We show that our novel approach is able to detect tree positions in a mixed and vertically structured stand with an overall accuracy of 91.6%, and with omission- and commission error of only 5.7% and 2.7% respectively. Moreover, we were able to reproduce the stand’s diameter in breast height (DBH distribution, and to estimate single trees DBH with a mean average deviation of ±2.90 cm compared with tape measurements as reference.

1,3-Dibromo 5,5-dimethylhydantoin (DBH-Catalyzed Solvent-Free Synthesis of 2-arylbenzimidazoles under Microwave Irradiation

Directory of Open Access Journals (Sweden)

Mehdi Forouzani

2012-01-01

Full Text Available An expeditious synthesis of 2-aryl-benzimidazoles by the condensation of o-phenylenediamine with various arylaldehydes is described. This greener protocol is catalyzed by 1,3-Dibromo 5,5-dimethylhydantoin (DBH, and proceeds efficiently in the absence of any organic solvent under thermal condition and microwave irradiation in high yields.

Incorporating shape constraints in generalized additive modelling of the height-diameter relationship for Norway spruce

Directory of Open Access Journals (Sweden)

Natalya Pya

2016-02-01

Full Text Available Background: Measurements of tree heights and diameters are essential in forest assessment and modelling. Tree heights are used for estimating timber volume, site index and other important variables related to forest growth and yield, succession and carbon budget models. However, the diameter at breast height (dbh can be more accurately obtained and at lower cost, than total tree height. Hence, generalized height-diameter (h-d models that predict tree height from dbh, age and other covariates are needed. For a more flexible but biologically plausible estimation of covariate effects we use shape constrained generalized additive models as an extension of existing h-d model approaches. We use causal site parameters such as index of aridity to enhance the generality and causality of the models and to enable predictions under projected changeable climatic conditions. Methods: We develop unconstrained generalized additive models (GAM and shape constrained generalized additive models (SCAM for investigating the possible effects of tree-specific parameters such as tree age, relative diameter at breast height, and site-specific parameters such as index of aridity and sum of daily mean temperature during vegetation period, on the h-d relationship of forests in Lower Saxony, Germany. Results: Some of the derived effects, e.g. effects of age, index of aridity and sum of daily mean temperature have significantly non-linear pattern. The need for using SCAM results from the fact that some of the model effects show partially implausible patterns especially at the boundaries of data ranges. The derived model predicts monotonically increasing levels of tree height with increasing age and temperature sum and decreasing aridity and social rank of a tree within a stand. The definition of constraints leads only to marginal or minor decline in the model statistics like AIC. An observed structured spatial trend in tree height is modelled via 2-dimensional surface

Stand diameter distribution modelling and prediction based on Richards function.

Directory of Open Access Journals (Sweden)

Ai-guo Duan

Full Text Available The objective of this study was to introduce application of the Richards equation on modelling and prediction of stand diameter distribution. The long-term repeated measurement data sets, consisted of 309 diameter frequency distributions from Chinese fir (Cunninghamia lanceolata plantations in the southern China, were used. Also, 150 stands were used as fitting data, the other 159 stands were used for testing. Nonlinear regression method (NRM or maximum likelihood estimates method (MLEM were applied to estimate the parameters of models, and the parameter prediction method (PPM and parameter recovery method (PRM were used to predict the diameter distributions of unknown stands. Four main conclusions were obtained: (1 R distribution presented a more accurate simulation than three-parametric Weibull function; (2 the parameters p, q and r of R distribution proved to be its scale, location and shape parameters, and have a deep relationship with stand characteristics, which means the parameters of R distribution have good theoretical interpretation; (3 the ordinate of inflection point of R distribution has significant relativity with its skewness and kurtosis, and the fitted main distribution range for the cumulative diameter distribution of Chinese fir plantations was 0.4∼0.6; (4 the goodness-of-fit test showed diameter distributions of unknown stands can be well estimated by applying R distribution based on PRM or the combination of PPM and PRM under the condition that only quadratic mean DBH or plus stand age are known, and the non-rejection rates were near 80%, which are higher than the 72.33% non-rejection rate of three-parametric Weibull function based on the combination of PPM and PRM.

New Hybrid Algorithms for Estimating Tree Stem Diameters at Breast Height Using a Two Dimensional Terrestrial Laser Scanner

Directory of Open Access Journals (Sweden)

Jianlei Kong

2015-07-01

Full Text Available In this paper, a new algorithm to improve the accuracy of estimating diameter at breast height (DBH for tree trunks in forest areas is proposed. First, the information is collected by a two-dimensional terrestrial laser scanner (2DTLS, which emits laser pulses to generate a point cloud. After extraction and filtration, the laser point clusters of the trunks are obtained, which are optimized by an arithmetic means method. Then, an algebraic circle fitting algorithm in polar form is non-linearly optimized by the Levenberg-Marquardt method to form a new hybrid algorithm, which is used to acquire the diameters and positions of the trees. Compared with previous works, this proposed method improves the accuracy of diameter estimation of trees significantly and effectively reduces the calculation time. Moreover, the experimental results indicate that this method is stable and suitable for the most challenging conditions, which has practical significance in improving the operating efficiency of forest harvester and reducing the risk of causing accidents.

Retrograde intrarenal surgery versus percutaneous lithotripsy to treat renal stones 2-3 cm in diameter.

Science.gov (United States)

Zengin, Kursad; Tanik, Serhat; Karakoyunlu, Nihat; Sener, Nevzat Can; Albayrak, Sebahattin; Tuygun, Can; Bakirtas, Hasan; Imamoglu, M Abdurrahim; Gurdal, Mesut

2015-01-01

Retrograde intrarenal surgery (RIRS) performed using a flexible ureterorenoscope marked the beginning of a new era in urology. Today, even staghorn stones are successfully treated via RIRS. The recommended treatment for larger stones is percutaneous nephrolithotomy (PNL). However, the question of whether PNL or RIRS should be the first-line treatment option for larger stones remains controversial. In this study, we contribute to the debate by comparing the success and complication rates of PNL and RIRS that were used to treat renal pelvis stones 2-3 cm in diameter. The medical records of 154 patients (74 PNL, 80 RIRS) were retrospectively evaluated. PNL patients were placed in Group 1 and RIRS patients in Group 2. The complete stone-free rates were 95.5% in the PNL group and 80.6% in the RIRS group 1 month postoperatively (P = 0.061). The respective complication rates (evaluated using the Clavien system) were 13.5% and 8.8% (P = 0.520). RIRS affords a comparable success rate, causes fewer complications than PNL, and seems to be a promising alternative to PNL when larger stones are to be treated. Prospective randomized controlled trials are needed to confirm these findings.

Effectiveness of differing trap types for the detection of emerald ash borer (Coleoptera: Buprestidae).

Science.gov (United States)

Marshall, Jordan M; Storer, Andrew J; Fraser, Ivich; Beachy, Jessica A; Mastro, Victor C

2009-08-01

The early detection of populations of a forest pest is important to begin initial control efforts, minimizing the risk of further spread and impact. Emerald ash borer (Agrilus planipennis Fairmaire) is an introduced pestiferous insect of ash (Fraxinus spp. L.) in North America. The effectiveness of trapping techniques, including girdled trap trees with sticky bands and purple prism traps, was tested in areas with low- and high-density populations of emerald ash borer. At both densities, large girdled trap trees (>30 cm diameter at breast height [dbh], 1.37 m in height) captured a higher rate of adult beetles per day than smaller trees. However, the odds of detecting emerald ash borer increased as the dbh of the tree increased by 1 cm for trap trees 15-25 cm dbh. Ash species used for the traps differed in the number of larvae per cubic centimeter of phloem. Emerald ash borer larvae were more likely to be detected below, compared with above, the crown base of the trap tree. While larval densities within a trap tree were related to the species of ash, adult capture rates were not. These results provide support for focusing state and regional detection programs on the detection of emerald ash borer adults. If bark peeling for larvae is incorporated into these programs, peeling efforts focused below the crown base may increase likelihood of identifying new infestations while reducing labor costs. Associating traps with larger trees ( approximately 25 cm dbh) may increase the odds of detecting low-density populations of emerald ash borer, possibly reducing the time between infestation establishment and implementing management strategies.

Spatial distribution structure and volume of Colombian black oak forest (Colombobalanus excelsa (Lozano, Hern. Cam. & Henao, J.E. Nixon & Crepet National Natural Park Cueva de los Guácharos

Directory of Open Access Journals (Sweden)

David Eduardo Dávila

2012-12-01

Full Text Available The spatial distribution of Colombobalanus excelsa forests in the Cueva de los Guácharos Natural National Park and its buffer zone was determined. The forest’s structural parameters were determined by conducting a stratified forest inventory that consisted of four plots of 0.5 ha distributed in two strata. The first stratum was located in the park and the second in its buffer zone. Each strip consisted of plots of 20 x 50 m within which individuals with diameters at breast height = 10 cm DBH were measured for total height, crown diameter and the condition of each tree. Within each strip a 10 x 10 m subplot was used to assess individuals with DBH = 10 cm and heights greater than 3 m. In addition the number of seedlings of height = 0.3 m were counted in subplots of 5 x 5 m. Models were generated to estimate the height and volume as a function of DBH. We report a total of eight natural stands of black oak reaching 2000 ha of which 28.3 ha were found within the park. We report a density of 281.7 trees ha-1 with a basal area of 52.33 m2 ha-1 and a volume of 761.65 m3 ha-1. The form-factor for the species was of 0.76041. Six models were fitted to estimate the height and six for volume adjustments of 0.90 and 0.988, respectively.

Measurement of the aortic diameter in the asymptomatic Korean population: Assessment with multidetector CT

International Nuclear Information System (INIS)

Lee, Sang Hwan; Lee, Whal; Choi, Hyuck Jae; Kim, Dae Jin; Park, Eun Ah; Chung, Jin Wook; Park, Jae Hyung

2013-01-01

To determine normal reference values for aortic diameters in asymptomatic Korean adults. Three hundred adults without signs or symptoms of cardiovascular diseases were enrolled in this study. Aortic diameters were measured at nine predetermined levels on CT images. Aortic diameter measurements were adjusted for body surface area. Analysis of data was performed with regard to age, sex, weight, height and hypertension. Aortic diameters were 2.99 ± 0.57 cm at the ascending aorta, 2.54 ± 0.35 cm at the transverse aortic arch, 2.36 ± 0.35 cm at the proximal descending thoracic aorta (DTA), 2.23 ± 0.37 cm at the mid DTA, 2.17 ± 0.38 cm at the distal DTA, 2.16 ± 0.37 cm at the thoracoabdominal junction, 2.10, 00B1, 0.35 cm at the level of the celiac axis, 1.94, 00B1, 0.36 cm at the suprarenal aorta, 1.58 ± 0.24 cm at the aortic bifurcation. Men had slightly larger diameters than women (p < 0.05). All diameters increased with age and hypertension, with statistical significance (p < 0.01). And all aortic diameters increased with height (p < 0.05) except at the level of the aortic arch (p = 0.056), and increased with weight (p < 0.05) except at the level of the suprarenal aorta (p = 0.067). Male sex, higher weight and height, age and hypertension are associated with larger aortic diameters in asymptomatic Korean adults.

Evaluation of neutronic characteristics of STACY 80-cm-diameter cylindrical core fueled with 6% enriched uranyl nitrate solution

International Nuclear Information System (INIS)

Yanagisawa, Hiroshi; Sono, Hiroki

2003-06-01

For the examination of neutronic safety design of forthcoming experimental core configurations in the Static Experiment Critical Facility (STACY), neutronic characteristics of 80-cm-diameter cylindrical cores fueled with 6% enriched uranyl nitrate solution have been evaluated by computational analyses. In the analyses, the latest nuclear data library, JENDL-3.3, was used as neutron cross section data. The neutron diffusion and transport calculations were performed using a diffusion code, CITATION, in the SRAC code system and a continuous-energy Monte Carlo code, MVP. Critical level heights of the cores were obtained using such parameters as uranium concentration (up to 500 gU/l), free nitric acid concentration (up to 8 mol/l), and concentration of soluble neutron poisons, gadolinium and boron. It has been confirmed from the evaluation that all critical cores comply with safety criteria required in the STACY operation concerning excess reactivity, reactivity addition rates and shutdown margins by safety rods. (author)

Economically important species dominate aboveground carbon storage in forests of southwestern Amazonia

Directory of Open Access Journals (Sweden)

N. Galia Selaya

2017-06-01

Full Text Available Tree species in tropical forests provide economically important goods and ecosystem services. In submontane forests of southwestern Amazonia, we investigated the degree to which tree species important for subsistence and trade contribute to aboveground carbon storage (AGC. We used 41 1-hectare plots to determine the species abundance, basal area, and AGC of stems > 10 cm diameter at breast height (dbh. Economically important taxa were classified using ethnobotanical studies and according to their stem density. These taxa (n = 263 accounted for 45% of total stems, 53% of total basal area, and 56% of total AGC, significantly more than taxa with minor or unknown uses (Welch test at p 40 cm and few stems in regeneration classes of dbh < 10 to 20 cm (e.g., Bertholletia excelsa, Cariniana spp., Cedrelinga spp., Ceiba spp., Dipteryx spp., whereas dominant Tetragastris spp., and Pseudolmedia spp. had most stems in low diameter classes and a median diameter of < 30 cm. Bertholletia excelsa, with 1.5 stems per hectare, showed the highest basal area of any species and accounted for 9% of AGC (11 Mg/ha, twice that of the second-ranking species. Our study shows that economic importance and carbon stocks in trees are closely linked in southwestern Amazonia. Unplanned harvests can disrupt synergistic dual roles altering carbon stocks temporally or permanently. Precautionary measures based on species ecology, demography, and regeneration traits should be at the forefront of REDD+ to reconcile maximum harvesting limits, biodiversity conservation, and sustainable forest management.

Retrograde Intrarenal Surgery versus Percutaneous Lithotripsy to Treat Renal Stones 2-3 cm in Diameter

Directory of Open Access Journals (Sweden)

Kursad Zengin

2015-01-01

Full Text Available Objective. Retrograde intrarenal surgery (RIRS performed using a flexible ureterorenoscope marked the beginning of a new era in urology. Today, even staghorn stones are successfully treated via RIRS. The recommended treatment for larger stones is percutaneous nephrolithotomy (PNL. However, the question of whether PNL or RIRS should be the first-line treatment option for larger stones remains controversial. In this study, we contribute to the debate by comparing the success and complication rates of PNL and RIRS that were used to treat renal pelvis stones 2-3 cm in diameter. Materials and Methods. The medical records of 154 patients (74 PNL, 80 RIRS were retrospectively evaluated. PNL patients were placed in Group 1 and RIRS patients in Group 2. Results. The complete stone-free rates were 95.5% in the PNL group and 80.6% in the RIRS group 1 month postoperatively (P=0.061. The respective complication rates (evaluated using the Clavien system were 13.5% and 8.8% (P=0.520. Conclusions. RIRS affords a comparable success rate, causes fewer complications than PNL, and seems to be a promising alternative to PNL when larger stones are to be treated. Prospective randomized controlled trials are needed to confirm these findings.

STAND STRUCTURE OF Pinus hartwegii AFFECTED BY FIRE USING NEIGHBOURHOOD PARAMETERS IN THE SIERRA MADRE ORIENTAL, MEXICO.

Directory of Open Access Journals (Sweden)

Diana Yemilet Avila Flores

2012-08-01

Full Text Available The objective of this research was to characterize the pattern of spatial structure of a Pinus hartwegii forest in the Sierra Madre Oriental, affected by a fire in 1998. Sampling was stratified by fire severity. Three fire severity classes were defined based on the degree of crown consumption (low, medium and high. Three sample plots of 40m x 40m were established for each severity. The variables obtained for all trees with a diameter at breast height (DBH ≥ 5 cm in each plot were: DBH to 1.30 m (cm, height (m, spatial location by recording the azimuth (° and distance (m from center of the plot to each tree. To describe the stand structure three groups of indices were employed: “contagion” and “distances” (Wi and Di, “dominance” (Ui, and “size differentiation” (TDi and THi for DBH and height respectively. An analysis of variance was performed to detect differences between dasometrics parameters by fire severity. Statistical analysis shows significant differences (p>0.001 in the parameters such as basal area, diameter, and height, along the low, medium, and high fire severities. The characterization of the Pinus hartwegii spatial structure suggests that, with increasing degree of fire severity, the stands showed an increase on the aggregation index, however, the dimensional differentiation and dominance indices decreases as the fire severity increases.

ESTRUTURA POPULACIONAL E REGENERAÇÃO DE ESPÉCIES ARBÓREAS NA FLORESTA NACIONAL DE SÃO FRANCISCO DE PAULA, RIO GRANDE DO SUL

Directory of Open Access Journals (Sweden)

Angela Luciana de Avila

2016-01-01

Full Text Available ABSTRACT The aim of this study was to characterize the population structure and aspects of regeneration of Araucaria angustifolia (Bertol. Kuntze, Blepharocalyx salicifolius (Kunth O. Berg and Ilex paraguariensis A. St.- Hil. in different environmental and disturbance conditions in the National Forest of São Francisco de Paula, RS state. Six conglomerates of one hectare were used, with 16 plots (20 x 20 m each, where the species were sampled in three size classes. The size class II (SC II – diameter at breast height (DBH ≥ 9.55 cm was sampled in 96 plots, the SC I (4.8 ≤ DBH < 9.55 cm in 36 subplots of 10 x 10 m, and the established natural regeneration (ENR (1 ≤ DBH < 4.8 cm in 36 cells of 3.16 x 3.16 m. The seedling bank (SB - height ≥ 30 cm and DBH < 1 cm, the seed rain (SR and the soil seed bank (SSB were sampled in all plots of 20 x 20 m. The data were analysed by taking into account all the different vegetation groups together and separately for each cluster identified in a previous study. For SC II, the frequency distribution of DBH was analysed combined with the analysis of absolute density and frequency for all life stages (SR, SSB, SB, ENR, SC I and SC II. The results indicated high variability in density of these species among the different life stages and environmental conditions. Araucaria angustifolia presented gaps in the regeneration process in areas that had low past disturbance, not showing the “reverse-J” distribution (SC II and with lower regeneration capacity in relation to the other species (SR, SSB and SB. Ilex paraguariensis and Blepharocalyx salicifolius showed higher population stability in environment with low level of human interference (SC II. The first species demonstrated preference for soils with good drainage, while the second species for humid soils. Moreover, gaps in the regeneration process of different populations were detected, which changed according to environmental conditions and

Community stand structure of rehabilitated forest at Kenaboi Forest Reserve, Negeri Sembilan, Malaysia

Science.gov (United States)

Fatma, N. A. H.; Wan Juliana, W. A.; Shaharuddin, M. I.; Wickneswari, R.

2016-11-01

A descriptive study of species composition, community structure and biomass was conducted in compartment 107, which is a rehabilitated area at Kenaboi Forest Reserve, Jelebu, Negeri Sembilan. The objective is to determine the forest structure and species composition in a rehabilitated area of Kenaboi FR since enrichment planting had done. A sample plot of 1 hectare was censused and a total of 395 trees with diameter ≥ 5 cm DBH were recorded. A total of 285 individual trees were identified belonging to 20 families and the commonest family was Dipterocarpaceae with 193 individuals. The highest tree density per ha was Shorea acuminata at 33% followed by S. parvifolia, 10% and S. leprosula, 6%. The biggest tree was Artocarpus elasticus Reinw. ex Blume with a diameter of 101 cm. The total basal area was 34.48 m2/ha, whereby the highest basal area was between 45 - 54.9 cm DBH class that contributed 10.21 m2/ha (30%). The total biomass estimation (above ground and below ground) was 792.57 t/ha. Dipterocarpaceae contributed the highest total biomass at 545.14 t/ha with S. acuminata contributed the highest total biomass of 330.45 t/ha. This study will contribute to the knowledge of regeneration forest especially on how the ecological process restoring the biodiversity and ecosystem functioning in rehabilitated forest by practicing the enrichment planting of native species.

Do plant species influence soil CO2 and N2O fluxes in a diverse tropical forest?

Science.gov (United States)

J.L.M. van Haren; R.C. de Oliveira; N. Restrepo-Coupe; L. Hutyra; P. B. de Camargo; Michael Keller; S.R. Saleska

2010-01-01

[1] To test whether plant species influence greenhouse gas production in diverse ecosystems, we measured wet season soil CO2 and N2O fluxes close to 300 large (>35 cm in diameter at breast height (DBH)) trees of 15 species at three clay‐rich forest sites in central Amazonia. We found that soil CO2 fluxes were 38% higher near large trees than at control sites >10...

Retrieving forest stand parameters from SAR backscatter data using a neural network trained by a canopy backscatter model

International Nuclear Information System (INIS)

Wang, Y.; Dong, D.

1997-01-01

It was possible to retrieve the stand mean dbh (tree trunk diameter at breast height) and stand density from the Jet Propulsion Laboratory (JPL) Airborne Synthetic Aperture Radar (AIRSAR) backscatter data by using threelayered perceptron neural networks (NNs). Two sets of NNs were trained by the Santa Barbara microwave canopy backscatter model. One set of the trained NNs was used to retrieve the stand mean dbh, and the other to retrieve the stand density. Each set of the NNs consisted of seven individual NNs for all possible combinations of one, two, and three radar wavelengths. Ground and multiple wavelength AIRSAR backscatter data from two ponderosa pine forest stands near Mt. Shasta, California (U.S.A.) were used to evaluate the accuracy of the retrievals. The r.m.s. and relative errors of the retrieval for stand mean dbh were 6.1 cm and 15.6 per cent for one stand (St2), and 3.1 cm and 6.7 per cent for the other stand (St11). The r.m.s. and relative errors of the retrieval for stand density were 71.2 treesha-1 and 23.0 per cent for St2, and 49.7 treesha-1 and 21.3 per cent for St11. (author)

Patterns of diversity and regeneration in unmanaged moist deciduous forests in response to disturbance in Shiwalik Himalayas, India

Directory of Open Access Journals (Sweden)

Mukesh Kumar Gautam

2016-06-01

Full Text Available We studied vegetation attributes in Indian tropical moist deciduous unmanaged forests to determine the influence of forest disturbances on them. We enumerated 89 species: 72 under moderate disturbance and 54 under least disturbance. The data from 3399 stems [>5 cm diameter at breast height (dbh] decreased linearly along the disturbance gradient. The basal area was largest in least disturbed forests (61 m2/ha and smallest in intensely disturbed forest (41 m2/ha. Under least and moderate disturbance, tree density-diameter distribution had negative exponential curves, whereas highly disturbed forests had unimodal-shaped curves where a few trees 5–10 cm and >50 cm in diameter were recorded. Most tree and shrub layer species under heavy and intense disturbance had impaired regeneration. Moderate disturbance intensity thus apparently benefits species diversity, stand density, and regeneration. Decline in seedlings and saplings, especially tree species, threaten forest regeneration and the maintenance of species diversity of unmanaged tropical forests.

ALLOMETRIC EQUATIONS FOR ESTIMATING ABOVEGROUND BIOMASS IN PAPUA TROPICAL FOREST

Directory of Open Access Journals (Sweden)

Sandhi Imam Maulana

2014-10-01

Full Text Available Allometric equations can be used to estimate biomass and carbon stock of  the forest. However, so far the allometric equations for commercial species in Papua tropical forests have not been appropriately developed. In this research, allometric equations are presented based on the genera of  commercial species. Few equations have been developed for the commercial species of  Intsia, Pometia, Palaquium and Vatica genera and an equation of  a mix of  these genera. The number of  trees sampled in this research was 49, with diameters (1.30 m above-ground or above buttresses ranging from 5 to 40 cm. Destructive sampling was used to collect the samples where Diameter at Breast Height (DBH and Wood Density (WD were used as predictors for dry weight of  Total Above-Ground Biomass (TAGB. Model comparison and selection were based on the values of  F-statistics, R-sq, R-sq (adj, and average deviation. Based on these statistical indicators, the most suitable model for Intsia, Pometia, Palaquium and Vatica genera respectively are Log(TAGB = -0.76 + 2.51Log(DBH, Log(TAGB = -0.84 + 2.57Log(DBH, Log(TAGB = -1.52 + 2.96Log(DBH, and Log(TAGB = -0.09 + 2.08Log(DBH. Additional explanatory variables such as Commercial Bole Height (CBH do not really increase the indicators’ goodness of  fit for the equation. An alternative model to incorporate wood density should  be considered for estimating the above-ground biomass for mixed genera. Comparing the presented mixed-genera equation; Log(TAGB = 0.205 + 2.08Log(DBH + 1.75Log(WD, R-sq: 97.0%, R-sq (adj: 96.9%, F statistics 750.67, average deviation: 3.5%; to previously published datashows that this local species specific equation differs substantially from previously published equations and this site-specific equation is  considered to give a better estimation of  biomass.

El bosque del parque central de la urbanización El Paraíso: estructura, composición de especies y crecimiento de árboles

Science.gov (United States)

E. Román Nunci; H. Marcano Vega; I. Vicéns; G. Bortolamedi; A.E. Lugo

2005-01-01

We studied an urban forest established in 1988 by residents of the El Paraíso urbanization. In 2007 the forest had 37 forest species (9 native and 28 introduced) with diameter at breast height (dbh) ≥ 4 cm in a 1.0785 ha area. The most common species was the hybrid mahogany (Swietenia macrophylla x mahagony) with an Importance Value of 24.3 percent. The forest had two...

Ecological effects of pipeline construction through deciduous forested wetlands, Midland County, Michigan

Energy Technology Data Exchange (ETDEWEB)

Zellmer, S.D. (Argonne National Lab., IL (United States)); Rastorfer, J.R. (Chicago State Univ., IL (United States). Dept. of Biological Sciences ANL/CSU Cooperative Herbarium, Chicago, IL (United States)); Van Dyke, G.D. (Trinity Christian Coll., Palos Heights, IL (United States). Dept. of Biology)

1991-07-01

Implementation of recent federal and state regulations promulgated to protect wetlands makes information on effects of gas pipeline rights-of-way (ROWs) in wetlands essential to the gas pipeline industry. This study is designed to record vegetational changes induced by the construction of a large-diameter gas pipeline through deciduous forested wetlands. Two second-growth forested wetland sites mapped as Lenawee soils, one mature and one subjected to recent selective logging, were selected in Midland County, Michigan. Changes in the adjacent forest and successional development on the ROW are being documented. Cover-class estimates are being made for understory and ROW plant species using 1 {times}1-m quadrats. Counts are also being made for all woody species with stems < 2 cm in diameter at breast height (dbh) in the same plots used for cover-class estimates. Individual stem diameters and species counts are being recorded for all woody understory and overstory plants with stems {ge}2 cm dbh in 10 {times} 10-m plots. Although analyses of the data have not been completed, preliminary analyses indicate that some destruction of vegetation at the ROW forest edge may have been avoidable during pipeline construction. Rapid regrowth of many native wetland plant species on the ROW occurred because remnants of native vegetation and soil-bearing propagules of existing species survived on the ROW after pipeline construction and seeding operations. 91 refs., 11 figs., 3 tabs.

Ecological effects of pipeline construction through deciduous forested wetlands, Midland County, Michigan

International Nuclear Information System (INIS)

Zellmer, S.D.; Rastorfer, J.R.; Van Dyke, G.D.

1991-07-01

Implementation of recent federal and state regulations promulgated to protect wetlands makes information on effects of gas pipeline rights-of-way (ROWs) in wetlands essential to the gas pipeline industry. This study is designed to record vegetational changes induced by the construction of a large-diameter gas pipeline through deciduous forested wetlands. Two second-growth forested wetland sites mapped as Lenawee soils, one mature and one subjected to recent selective logging, were selected in Midland County, Michigan. Changes in the adjacent forest and successional development on the ROW are being documented. Cover-class estimates are being made for understory and ROW plant species using 1 x1-m quadrats. Counts are also being made for all woody species with stems < 2 cm in diameter at breast height (dbh) in the same plots used for cover-class estimates. Individual stem diameters and species counts are being recorded for all woody understory and overstory plants with stems ≥2 cm dbh in 10 x 10-m plots. Although analyses of the data have not been completed, preliminary analyses indicate that some destruction of vegetation at the ROW forest edge may have been avoidable during pipeline construction. Rapid regrowth of many native wetland plant species on the ROW occurred because remnants of native vegetation and soil-bearing propagules of existing species survived on the ROW after pipeline construction and seeding operations. 91 refs., 11 figs., 3 tabs

A study on the various diameters of the heart and frontal cardiac area

International Nuclear Information System (INIS)

Kim, Byung Soo

1970-01-01

Cardiac measurement by radiographic method is the most accurate procedure by which physicians can obtain data regarding cardiac size in life. In order to determine the standard values among Koreans, cardiac mensuration by the radiographic frontal cardiac area method was carried out on 225 healthy Korean infants, 111 of whom were males and 114 were females. The results were as follows: 1. Transverse diameter at one month of age is 4.56 ± 0.12 cm in male and 5.00 ± 0.19 cm in female and at eleven months of age 7.35 ± 0.12 cm in male, 7.42 ± 0.09 cm in female. 2. Board diameter at one month of age is 3.94 ± 0.15 cm in male and 4.53 ± 0.19 cm in female and at eleven months of age 5.82 ± 0.14 cm in male, 5.94 ± 0.14 cm in female. 3. Long diameter at one month of age is 3.94 ± 0.15 cm in male and 5.30 ± 0.23 cm in female and at eleven months of age 7.67 ± 0.15 cm in male, 7.55 ± 0.11 cm in female. 4. The obliquity of the cardiac axis shows no significant difference in age and sex. The range of the measurements are between 31 .deg and 37 .deg. 5. Frontal cardiac area at one month of age is 14.36 ± 1.11 cm 2 in male and 18.97 ± 0.14 cm 2 in female and at eleven months of age 35.27 ± 1.21 cm 2 in male, 35.43 ± 0.45 cm 2 in female. 6. In every diameter and frontal cardiac area, except the obliquity of the cardiac axis, show greater value in female at the age of 1 month, but show almost same value in male as in female at the age of 11 months

Evaluating Generic Pantropical Allometric Models for the Estimation of Above-Ground Biomass in the Teak Plantations of Southern Western Ghats, India

Directory of Open Access Journals (Sweden)

S. Sandeep

2015-09-01

Full Text Available The use of suitable tree biomass allometric equations is crucial for making precise and non- destructive estimation of carbon storage and biomass energy values. The aim of this research was to evaluate the accuracy of the most commonly used pantropical allometric models and site-specific models to estimate the above-ground biomass (AGB in different aged teak plantations of Southern Western Ghats of India. For this purpose, the AGB data measured for 70 trees with diameter >10 cm from different aged teak plantations in Kerala part of Southern Western Ghats following destructive procedure was used. The results show that site specific models based on a single predictor variable diameter at breast height (dbh, though simple, may grossly increase the uncertainty across sites. Hence, a generic model encompassing dbh, height and wood specific gravity with sufficient calibration taking into account different forest types is advised for the tropical forest systems. The study also suggests that the commonly used pantropical models should be evaluated for different ecosystems prior to their application at national or regional scales.

Incidental, small (< 3 cm), unilocular, pancreatic cysts: Factors that predict lesion progression during imaging surveillance

Energy Technology Data Exchange (ETDEWEB)

Kim, Go Eun [Dept. of Radiology, Chonnam National University Hospital, Gwangju (Korea, Republic of); Shin, Sang Soo; Kim, Jin Woong; Heo, Suk Hee; Lim, Hyo Soon; Jun, Chung Hwan; Jeong, Yong Yeon [Chonnam National University Medical School, Gwangju (Korea, Republic of)

2017-11-15

To explore the features that predict size increase and development of potential malignant features in incidentally detected, unilocular cystic pancreatic lesions (CPLs) less than 3 cm in diameter, during subsequent follow-up. We retrieved data of patients diagnosed with unilocular CPLs less than 3 cm in diameter during the period from November 2003 through December 2014, using a computerized search. All serial CT and MR images were analyzed to identify the number, size, and location of CPLs; dilatation of the main pancreatic duct; and occurrence of worrisome features and high-risk stigmata of malignancy in the lesion. The characteristics of CPLs were compared between the increase (i.e., size increase during subsequent follow-up) and no-increase groups. For CPLs in the increase group, subgroup analysis was performed according to the lesion size at the last follow-up (< 3 cm vs. ≥ 3 cm). Among 553 eligible patients, 132 (23.9%) had CPLs that increased in size, and 421 (76.1%) had CPLs that did not, during follow-up. Of the 132, 12 (9.1%) CPLs increased to diameters ≥ 3 cm at the final follow-up. Among the various factors, follow-up duration was a significant independent factor for an interval size increase of CPLs (p < 0.001). In the increase group, initial cyst size was a significant independent factor to predict later size increase to or beyond 3 cm in diameter (p < 0.001), and the initial cyst diameter ≥ 1.5 cm predicted such a growth with a sensitivity and specificity of 83% and 72%, respectively. No significant factors to predict the development of potential malignant features were identified. Follow-up duration was associated with an interval size increase of CPLs. Among the growing CPLs, initial cyst size was associated with future lesion growth to and beyond 3 cm.

Automated estimation of abdominal effective diameter for body size normalization of CT dose.

Science.gov (United States)

Cheng, Phillip M

2013-06-01

Most CT dose data aggregation methods do not currently adjust dose values for patient size. This work proposes a simple heuristic for reliably computing an effective diameter of a patient from an abdominal CT image. Evaluation of this method on 106 patients scanned on Philips Brilliance 64 and Brilliance Big Bore scanners demonstrates close correspondence between computed and manually measured patient effective diameters, with a mean absolute error of 1.0 cm (error range +2.2 to -0.4 cm). This level of correspondence was also demonstrated for 60 patients on Siemens, General Electric, and Toshiba scanners. A calculated effective diameter in the middle slice of an abdominal CT study was found to be a close approximation of the mean calculated effective diameter for the study, with a mean absolute error of approximately 1.0 cm (error range +3.5 to -2.2 cm). Furthermore, the mean absolute error for an adjusted mean volume computed tomography dose index (CTDIvol) using a mid-study calculated effective diameter, versus a mean per-slice adjusted CTDIvol based on the calculated effective diameter of each slice, was 0.59 mGy (error range 1.64 to -3.12 mGy). These results are used to calculate approximate normalized dose length product values in an abdominal CT dose database of 12,506 studies.

Fabrication of large diameter alumino-silicate K+ sources

International Nuclear Information System (INIS)

Baca, D.; Chacon-Golcher, E.; Kwan, J.W.; Wu, J.K.

2003-01-01

Alumino-silicate K + sources have been used in HIF experiments for many years. For example the Neutralized Transport Expt. (NTX) and the High Current Transport Expt. (HCX) are now using this type of ion source with diameters of 2.54 cm and 10 cm respectively. These sources have demonstrated ion currents of 80 mA and 700 mA, for typical HIF pulse lengths of 5-10 (micro)s. The corresponding current density is ∼ 10-15 mA/cm 2 , but much higher current density has been observed using smaller size sources. Recently we have improved our fabrication techniques and, therefore, are able to reliably produce large diameter ion sources with high quality emitter surface without defects. This note provides a detailed description of the procedures employed in the fabrication process. The variables in the processing steps affecting surface quality, such as substrate porosity, powder size distribution, coating technique on large area concave surfaces, drying, and heat firing temperature have been investigated

Predictive equations for dimensions and leaf area of coastal Southern California street trees

Science.gov (United States)

P.J. Peper; E.G. McPherson; S.M. Mori

2001-01-01

Tree height, crown height, crown width, diameter at breast height (dbh), and leaf area were measured for 16 species of commonly planted street trees in the coastal southern California city of Santa Monica, USA. The randomly sampled trees were planted from 1 to 44 years ago. Using number of years after planting or dbh as explanatory variables, mean values of dbh, tree...

Thirty-centimeter-diameter ion milling source

International Nuclear Information System (INIS)

Robinson, R.S.

1978-01-01

A 30 cm beam diameter ion source has been designed and fabricated for micromachining and sputtering applications. An argon ion current density of 1 mA/cm 2 at 500 eV ion energy was selected as a design operating condition. The completed ion source met the design criteria at this operating condition with a uniform and well-collimated beam having an average variation in current density of +- 5% over the center of 20 cm of the beam. This ion source has a multipole magnetic field that employs permanent magnets between permeable pole pieces. Langmuir probe surveys of the source plasma support the design concepts of a multipole field and a circumferential cathode to enhance plasma uniformity

Size-related flowering and fecundity in the tropical canopy tree species, Shorea acuminata (Dipterocarpaceae) during two consecutive general flowerings.

Science.gov (United States)

Naito, Yoko; Kanzaki, Mamoru; Numata, Shinya; Obayashi, Kyoko; Konuma, Akihiro; Nishimura, Sen; Ohta, Seiichi; Tsumura, Yoshihiko; Okuda, Toshinori; Lee, Soon Leong; Muhammad, Norwati

2008-01-01

We monitored the reproductive status of all trees with diameters at breast height (dbh) >30 cm in a 40-ha plot at Pasoh, west Malaysia, and investigated the individual fecundity of 15 Shorea acuminata Dyer (Dipterocarpaceae) trees using seed-trapping methods during two consecutive general flowering periods in 2001 (GF2001) and 2002 (GF2002). The proportion of flowering trees was higher, and not dependent on size, in GF2002 (84.2%), than in GF2001 (54.5%), when flowering mainly occurred in trees with a dbh investment during the two consecutive reproductive events clearly differed between medium-sized and large trees; the former concentrated their reproductive investment in one of the reproductive events whereas the latter allocated their investment more evenly to both reproductive events. Our results suggest size-related differences in the resource allocation pattern for reproduction.

Assessing Precision in Conventional Field Measurements of Individual Tree Attributes

Directory of Open Access Journals (Sweden)

Ville Luoma

2017-02-01

Full Text Available Forest resource information has a hierarchical structure: individual tree attributes are summed at the plot level and then in turn, plot-level estimates are used to derive stand or large-area estimates of forest resources. Due to this hierarchy, it is imperative that individual tree attributes are measured with accuracy and precision. With the widespread use of different measurement tools, it is also important to understand the expected degree of precision associated with these measurements. The most prevalent tree attributes measured in the field are tree species, stem diameter-at-breast-height (dbh, and tree height. For dbh and height, the most commonly used measuring devices are calipers and clinometers, respectively. The aim of our study was to characterize the precision of individual tree dbh and height measurements in boreal forest conditions when using calipers and clinometers. The data consisted of 319 sample trees at a study area in Evo, southern Finland. The sample trees were measured independently by four trained mensurationists. The standard deviation in tree dbh and height measurements was 0.3 cm (1.5% and 0.5 m (2.9%, respectively. Precision was also assessed by tree species and tree size classes; however, there were no statistically significant differences between the mensurationists for dbh or height measurements. Our study offers insights into the expected precision of tree dbh and height as measured with the most commonly used devices. These results are important when using sample plot data in forest inventory applications, especially now, at a time when new tree attribute measurement techniques based on remote sensing are being developed and compared to the conventional caliper and clinometer measurements.

Moisture monitoring in large diameter boreholes

International Nuclear Information System (INIS)

Tyler, S.

1985-01-01

The results of both laboratory and field experiments indicate that the neutron moisture gauge traditionally used in soil physics experiments can be extended for use in large diameter (up to 15 cm) steel-cased boreholes with excellent results. This application will permit existing saturated zone monitoring wells to be used for unsaturated zone monitoring of recharge, redistribution and leak detection from waste disposal facilities. Its applicability to large diameter cased wells also gives the soil physicist and ground-water hydrologist and new set of monitoring points in the unsaturated zone to study recharge and aquifer properties. 6 refs., 6 figs., 2 tabs

An Ecological Comparison of Floristic Composition in Seasonal Semideciduous Forest in Southeast Brazil: Implications for Conservation

OpenAIRE

Lopes, Sérgio de Faria; Schiavini, Ivan; Oliveira, Ana Paula; Vale, Vagner Santiago

2012-01-01

We examined floristic patterns of ten seasonal semideciduous forest sites in southeastern Brazil and conducted a central sampling of one hectare for each site, where we took samples and identified all individual living trees with DBH (diameter at breast height, 1.30 m) ≥4.8 cm. Arboreal flora totaled 242 species, 163 genera, and 58 families. Fabaceae (38 species) and Myrtaceae (20 species) were families with the largest number of species. Only Copaifera langsdorffii and Hymenaea courbaril occ...

Terrain Classification and Identification of Tree Stems Using Ground-Based Lidar

Science.gov (United States)

2012-12-01

diameters using lidar data (e.g. Henning & Radtke , 2006; Maas et al., 2008) with RMS errors of 1.0 cm, but this has been done with little or no understory...occlusion or data sparsity. Here, the range is selected to balance these two competing effects. In the literature (Aschoff et al., 2004; Henning & Radtke ...restrictions in the assumed fits. While the dbh estimates are not as accurate as some previously reported (e.g. Henning & Radtke (2006)), this is to be

Operation of a Five-Stage 40,000-CM2-Area Insulator Stack at 158 KV/CM

International Nuclear Information System (INIS)

Anderson RA; Clark, Robert E; Corcoran, PA; Douglas, John W; Gilliland, TL; Horry, ML; Hughes, Thomas P; Ives, HC; Long, FW; Martin, TH; McDaniel, DH; Milton, Osborne; Mostrom, Michael A; Seamen, JF; Shoup, RW; Smith, ID; Smith, JW; Spielman, RB; Struve, KW; Stygar, WA; Vogtlin, George E; Wagoner, TC; Yamamoto, Osamu

1999-01-01

We have demonstrated successful operation of a 3.35- m-diameter insulator stack at 158 kV/cm on five consecutive Z-accelerator shots. The stack consisted of five +45 deg;-profile 5.715-cm-thick cross-linked-polystyrene (Rexolite- 1422) insulator rings, and four anodized- aluminum grading rings shaped to reduce the field at cathode triple junctions. The width of the voltage pulse at 89% of peak was 32 ns. We compare this result to a new empirical flashover relation developed from previous small-insulator experiments conducted with flat unanodized electrodes. The relation predicts a 50% flashover probability for a Rexolite insulator during an applied voltage pulse when E max e -0.27/d (t eff C) 1/10 = 224, where E max is the peak mean electric field (kV/cm), d is the insulator thickness (cm), t eff is the effective pulse width (ps), and C is the insulator circumference (cm). We find the Z stack can be operated at a stress at least 19% higher than predicted. This result, and previous experiments conducted by Vogtlin, suggest anodized electrodes with geometries that reduce the field at both anode and cathode triple junctions would improve the flashover strength of +45 deg; insulators

Stress calculations for RTNS-iI 50-cm targets

International Nuclear Information System (INIS)

Schumacher, B.J.; House, P.A.

1981-04-01

Structural calculations made during design of a 50-cm target for the Rotating Target Neutron Source (RTNS-II) are detailed. The limited ability of the current 23-cm diameter target to dissipate the additional beam power required for a yield increase from 2 x 10 13 to 4 x 10 13 neutrons/second has resulted in the need for a larger target. The stresses of several design configurations for a 50-cm target were calculated. The stress contours that would occur in several different target designs with and without various types of structural reinforcement that reduce stress and deflection are presented

Measurements of stem diameter: implications for individual- and stand-level errors.

Science.gov (United States)

Paul, Keryn I; Larmour, John S; Roxburgh, Stephen H; England, Jacqueline R; Davies, Micah J; Luck, Hamish D

2017-08-01

Stem diameter is one of the most common measurements made to assess the growth of woody vegetation, and the commercial and environmental benefits that it provides (e.g. wood or biomass products, carbon sequestration, landscape remediation). Yet inconsistency in its measurement is a continuing source of error in estimates of stand-scale measures such as basal area, biomass, and volume. Here we assessed errors in stem diameter measurement through repeated measurements of individual trees and shrubs of varying size and form (i.e. single- and multi-stemmed) across a range of contrasting stands, from complex mixed-species plantings to commercial single-species plantations. We compared a standard diameter tape with a Stepped Diameter Gauge (SDG) for time efficiency and measurement error. Measurement errors in diameter were slightly (but significantly) influenced by size and form of the tree or shrub, and stem height at which the measurement was made. Compared to standard tape measurement, the mean systematic error with SDG measurement was only -0.17 cm, but varied between -0.10 and -0.52 cm. Similarly, random error was relatively large, with standard deviations (and percentage coefficients of variation) averaging only 0.36 cm (and 3.8%), but varying between 0.14 and 0.61 cm (and 1.9 and 7.1%). However, at the stand scale, sampling errors (i.e. how well individual trees or shrubs selected for measurement of diameter represented the true stand population in terms of the average and distribution of diameter) generally had at least a tenfold greater influence on random errors in basal area estimates than errors in diameter measurements. This supports the use of diameter measurement tools that have high efficiency, such as the SDG. Use of the SDG almost halved the time required for measurements compared to the diameter tape. Based on these findings, recommendations include the following: (i) use of a tape to maximise accuracy when developing allometric models, or when

Growth characteristics of mangrove seedling in silvofishery pond – the allometric relationship of height, diameter and leaf abundance

Science.gov (United States)

Dwi Hastuti, Endah; Budi Hastuti, Rini

2018-03-01

Dynamic environment condition of the silvofishery pond should provide an effect on the growth of mangrove seedling. This research aimed to observe the morphometric growth rate of mangrove seedling of Avicennia marina and Rhizophora mucronata planted in the silvofishery pond and to analyze the morphometric growth relationship of height, diameter and leaf number development of mangrove seedling. The research was conducted through field experiment involving mangrove species of A. marina and R. mucronata for 18 months during March 2015 to September 2016, both single structured and mixed structure. The observation was conducted every 13 weeks including seedling height, diameter and number of leaves. Data analysis was conducted by regression to provide the statistical relation between the growth of diameter – height, diameter – number of leaves and height – number of leaves. The result showed that the growth rate of A. marina in single structured pond was ranged from 0.38 – 3.00 cm.wk-1, 0.0015 – 0.0969 cm.wk‑1 and 0.1 – 13.7 leaves.wk‑1 respectively for height, diameter and number of leaves, while in mixed structure was 0.23 – 1.69 cm.wk‑1, 0.0169 – 0.0731 cm.wk‑1 and 0.5 – 14.0 leaves.wk-. The growth of R. mucronata respectively in single and mixed structure were 0.08 – 2.00 cm.wk‑1 and 0.15 – 2.62 cm.wk‑1, 0.0031 – 0.1369 cm.wk‑1 and 0.0008 – 0.0831 cm.wk‑1 and 0.0 – 1.9 leaves.wk‑1 and 0.0 – 1.6 leaves.wk-1respectively for height, diameter and number of leaves. Data analysis showed that the growth of seedling height of Avicennia in the mixed structure was significantly affected by its diameter growth and the number of leaves of Avicennia in single structured was significantly affected by its diameter. While the height, diameter and number of leaves of R. mucronata both in mixed and single structured silvofishery ponds were independent to each other. This research concluded that mangrove seedling growth is varied among

Impact of forest disturbance on the structure and composition of vegetation in tropical rainforest of Central Sulawesi, Indonesia

Directory of Open Access Journals (Sweden)

RAMADHANIL PITOPANG

2012-10-01

Full Text Available We presented the structure and composition of vegetation in four (4 different land use types namely undisturbed primary forest, lightly disturbed primary forest, selectively logged forest, and cacao forest garden in tropical rainforest margin of the Lore Lindu National Park, Central Sulawesi Indonesia. Individually all big trees (dbh > 10 cm was numbered with tree tags and their position in the plot mapped, crown diameter and dbh measured, whereas trunk as well as total height measured by Vertex. Additionally, overstorey plants (dbh 2- 9.9 cm were also surveyed in all land use types. Identification of vouchers and additional herbarium specimens was done in the field as well as at Herbarium Celebense (CEB, Tadulako University, and Nationaal Herbarium of Netherland (L Leiden branch, the Netherland. The result showed that the structure and composition of vegetation in studied are was different. Tree species richness was decreased from primary undisturbed forest to cacao plantation, whereas tree diversity and its composition were significantly different among four (4 land use types. Palaquium obovatum, Chionanthus laxiflorus, Castanopsis acuminatissima, Lithocarpus celebicus, Canarium hirsutum, Eonymus acuminifolius and Sarcosperma paniculata being predominant in land use type A, B and C and Coffea robusta, Theobroma cacao, Erythrina subumbrans, Glyricidia sepium, Arenga pinnata, and Syzygium aromaticum in the cacao plantation. At the family level, undisturbed natural forest was dominated by Fagaceae and Sapotaceae disturbed forest by Moraceae, Sapotaceae, Rubiaceae, and agroforestry systems by Sterculiaceae and Fabaceae.

Caracterización estructural de un bosque de Podocarpus parlatorei y Juglans australis en Salta, Argentina

Directory of Open Access Journals (Sweden)

M.A. Pinazo

2003-06-01

Full Text Available Se estudió la estructura de bosques montanos ubicados en áreas con distinto grado de modificación humana en el Noroeste de Argentina (22º24’ S, 1550 msnm. Se utilizaron parcelas circulares para caracterizar los rodales. Los rodales fueron clasificados en función del área basal por especie. Se reconocieron cinco estructuras diferenciadas por la proporción de Juglans australis, Podocarpus parlatorei y de las especies tolerantes a la sombra Blepharocalyx salicifolius, Myrcianthes sp y Allophylus edulis. Se presentan datos de densidad y área basal de individuos con diámetro a la altura del pecho (DAP> 10 cm y la densidad de individuos con DAPStands of Subtropical Montane Cloud Forest were studied in areas under different land use regimes near Los Toldos (NW Argentina. Circular plots were used to calculate density and basal area of trees with dbh > 10 cm; and density of trees with dbh < 10 cm. The stands were classified and grouped as a function of basal area. Five structures were recognized, with different proportions of Juglans australis, Podocarpus parlatorei and shade-tolerant species like Blepharocalyx salicifolius, Allophylus edulis and Myrcianthes sp. Less disturbed area stands had a higher basal area and greater dbh for all species, and shade-tolerant species in the canopy. In the most disturbed area, all canopy species were shade intolerant and regeneration was dominated by shade-tolerant species. The differences in composition, basal area, stem diameter class distribution and regeneration indicate that the structure types corresponded to different stages of the successional process, and the regeneration of the most disturbed areas suggest a tendency towards the composition of mature forest.

Forest structure, diversity and soil properties in a dry tropical forest in Rajasthan, Western India

Directory of Open Access Journals (Sweden)

J. I. Nirmal Kumar

2011-06-01

Full Text Available Structure, species composition, and soil properties of a dry tropical forest in Rajasthan Western India, were examined by establishment of 25 plots. The forest was characterized by a relatively low canopy and a large number of small-diameter trees. Mean canopy height for this forest was 10 m and stands contained an average of 995 stems ha-1 (= 3.0 cm DBH; 52% of those stems were smaller than 10 cm DBH. The total basal area was 46.35 m2ha-1, of which Tectona grandis L. contributed 48%. The forest showed high species diversity of trees. 50 tree species (= 3.0 cm DBH from 29 families were identified in the 25 sampling plots. T. grandis (20.81% and Butea monosperma (9% were the dominant and subdominant species in terms of importance value. The mean tree species diversity indices for the plots were 1.08 for Shannon diversity index (H´, 0.71 for equitability index (J´ and 5.57 for species richness index (S´, all of which strongly declined with the increase of importance value of the dominant, T. grandis. Measures of soil nutrients indicated low fertility, extreme heterogeneity. Regression analysis showed that stem density and the dominant tree height were significantly correlated with soil pH. There was a significant positive relationship between species diversity index and soil available P, exchangeable K+, Ca2+ (all p values < 0.001 and a negative relationship with N, C, C:N and C:P ratio. The results suggest that soil properties are major factors influencing forest composition and structure within the dry tropical forest in Rajasthan.

Experimentally stabilized superconducting magnet with inner diameter of 700 mm

Energy Technology Data Exchange (ETDEWEB)

Vetlitskii, I A; Belonogov, A V; Dobrov, V M; Krylov, V L; Lebedev, A V; Lomkatsi, G S; Nilov, A F; Smolyankin, V T

1974-05-01

An experimental magnet, SPM-70, with the following characteristics was constructed. The inner diameter of the winding was 730 mm; outer diameter of the winding 1000 mm; height of winding 310 mm; magnetic induction at the center of the magnet 1.45 T; maximum magnetic induction 2.4 T; operation current 820 A; ampere-turns 1.07 x 10/sup 6/; design current density 2560 A/cm/sup 2/; stored energy 500 kJ; superconducting alloy Nb+50% Zr; weight of superconductor 23 kg; weight of copper 210 kg; resistivity of the copper in the strips at T = 4.2 K, B = 2.5 T, 2.6 x 10/sup -8/ ..cap omega.. cm.

Sustainable management of natural forests in pantanal region, Brazil.

Directory of Open Access Journals (Sweden)

Patricia Póvoa de Mattos

2010-08-01

Full Text Available The Pantanal region in Brazil has an area of 140,000 km², with approximately 30 % of natural forests distributed as deciduous, semideciduous, and forested savannas. The subregion of Nhecolandia represents 19 % of this area. There is constant concern about the sustainability of these forested areas, as there is a constant demand for wood for farm maintenance, mainly for making fence poles. The objective of this article is to indicate sustainable forest management practices in the Pantanal region of Nhecolandia. The methodology of this novel approach consisted of the recovery and organization of the available information to calculate the sustainable allowable cut per hectare, considering: cutting cycle, wood stock, periodic annual increment (PAI in percentage of volume from the commercial or interesting species and the stand structure. For forested savannas, the diameter at breast height (DBH of 529 trees per hectare were estimated as follows: 28 % with a DBH lower than 10 cm, 36 % from 10 to 20 cm, 21 % from 20 to 30 cm, 10 % from 30 to 40 cm and only 4 % greater than 40 cm. The estimated total volume per hectare was 84.2 m³ and the estimated basal area was 18.6 m². The forested areas of the Pantanal region present potential for sustainable use. However, due to regional characteristics and the lack of available information, an enhancement in research is recommended to establish a basic management guide to ensure its perpetuation for future generations.

ANALISIS BEBAN KERJA OPERATOR MESIN PEMOTONG BATU BESAR (SIRKEL 160 CM DENGAN MENGGUNAKAN METODE 10 DENYUT

Directory of Open Access Journals (Sweden)

Andriyanto Andriyanto

2012-12-01

Full Text Available PT. PAH merupakan sebuah industri pemotongan batu magma (magma stone yang terletak di jalan Magelang Km. 15 Yogyakarta. Di perusahaan pemotongan batu ini terdapat 3 ukuran pemotongan yaitu sirkel besar (diameter 160 cm, sirkel sedang (diameter 60 - 90 cm dan sirkel kecil (diameter 30 - 50 cm. Penelitian ini khususnya pada pemotongan batu besar, dimana terdapat keluhan kelelahan operator yang terdiri dari operator utama dan operator pembantu. Penelitian dilakukan dengan tujuan untuk mengetahui tingkat beban kerja fisik operator pemotong batu besar (sirkel 160 dengan metode 10 denyut. Dalam penelitian ini ditentukan lama waktu istirahat yang dibutuhkan operator utama maupun pembantu. Selanjutnya dilakukan implementasi waktu istirahat tersebut dan dilakukan pengukuran kembali untuk mengetahui penurunan denyut nadi kerja operator. Penerapan waktu istirahat tersebut membawa penurunan DNK operator masuk kategori ringan dan % CVL masuk kategori tidak terjadi kelelahan.

Tree Climbing Techniques and Volume Equations for Eschweilera (Matá-Matá, a Hyperdominant Genus in the Amazon Forest

Directory of Open Access Journals (Sweden)

Bruno O. Gimenez

2017-05-01

Full Text Available The Eschweilera genus has great ecological and economic importance due to its wide abundance in the Amazon basin. One potential use for the Eschweilera genus is in forest management, where just a few trees are removed per hectare. In order to improve the forest management in the Amazon, this study assessed two critical issues: volume equations fitted for a single genus and the development of a non-destructive method using climbing techniques. The equipment used to measure the sample trees included: climbing rope, ascenders, descenders, and carabiners. To carry out the objectives of this study, 64 trees with diameter at breast height (DBH ≥ 10 cm were selected and measured in ZF-2 Tropical Forestry Station near the city of Manaus, Brazil. Four single input models with DBH and four dual input models with DBH and merchantable height (H were tested. The Husch model (V = a × DBHb presented the best performance (R2 = 0.97. This model does not require the merchantable height, which is an important advantage, because of the difficulty in measuring this variable in tropical forests. When the merchantable height data are collected using accurate methods, the Schumacher and Hall model (V = a × DBHb × Hc is the most appropriated. Tree climbing techniques with the use of ropes, as a non-destructive method, is a good alternative to measure the merchantable height, the diameter along the stem, and also estimate the tree volume (m3 of the Eschweilera genus in the Amazon basin.

Floristic Inventory of The Proposed Site for Tarsier Tourism Center in Villa Aurora, Bilar, Bohol, Philippines

Directory of Open Access Journals (Sweden)

Tomas D Reyes Jr

2015-07-01

Full Text Available The study assessed the present vegetation composition of the Proposed Site for the Tarsier Tourism Center (PTTC at Villa Aurora, Bilar, Bohol and performed a comparative analysis with the existing Tarsier Sanctuary (TS at Canapnapan, Corella, Bohol. The basis for comparison was the computed importance values, species richness, species dominance, and percent distribution of plants according to self-defined DBH classes. Results showed that both sites had very high species richness and evenness values. Common overstorey and understorey plant species found in both areas were katagpo (Psychotria sp., sagimsim (Syzygium brevistylum [C. B. Rob]Merr. and bagauak (Clerodendrum minahassae Teijsm. & Binn.. Apart from sagimsim (Syzygium brevistylum [C.B.Rob.] Merr., selaginella (Selaginella cuppresina Lin., and lunas (Lunasia amara Blanco were also common in the ground vegetation of both areas. Percent distribution of trees according to self-defined DBH classes revealed that PTTC had 87.55% of the total recorded plants with DBH measurements of 20 cm. Percent distribution of trees on these DBH ranges (especially on DBH class >20 cm indicated the presence of medium and large trees. The largest DBH measured in the PTTC was 70 cm while in TS was only 22 cm. The proposed 10-ha site in Villa Aurora, Bilar, is suited to be utilized as Tarsier Tourism Center. In case the proposed project is to be pursued, enclosure similar to what has been constructed in Canapnapan, Corella, Bohol, Philippines should also be established to prevent stray animals from predating the captive tarsiers.

Data for developing allometric models and evaluating carbon stocks of the Zambezi Teak Forests in Zambia.

Science.gov (United States)

Ngoma, Justine; Moors, Eddy; Kruijt, Bart; Speer, James H; Vinya, Royd; Chidumayo, Emmanuel N; Leemans, Rik

2018-04-01

This paper presents data on carbon stocks of tropical tree species along a rainfall gradient. The data was generated from the Sesheke, Namwala, and Kabompo sites in Zambia. Though above-ground data was generated for all these three sites, we uprooted trees to determine below-ground biomass from the Sesheke site only. The vegetation was assessed in all three sites. The data includes tree diameter at breast height (DBH), total tree height, wood density, wood dry weight and root dry weight for large (≥ 5 cm DBH) and small (importance-value indices of various species for large and small trees are also determined. Below and above-ground carbon stocks of the surveyed tree species are presented per site. This data were used by Ngoma et al. (2018) [1] to develop above and below-ground biomass models and the reader is referred to this study for additional information, interpretation, and reflection on applying this data.

Structure, richness and composition of arboreal plants in a cloud thinning forest of Tolima (Colombia)

International Nuclear Information System (INIS)

Campo Kurmen, Juan Manuel

2010-01-01

Structure, richness, and floristic composition of the woody elements of the selective logging forest of the Vereda Dantas, (Ibague, Tolima, Colombia), where studied in a 0.1 ha plot sampled for all individuals ≥2.5 cm dbh. the forest is characterized by scarcity of lianas and hemiepiphytic, absence of typical families of the Colombian cloud forests between 2000 and 2500 m (Araceae, Ericaceae, Myrtaceae, Meliaceae and Aquifoliaceae), and richness increment of the Sabiaceae and Euphorbiaceae. Compared to others cloud forest from the Colombian Andes and the Neotropic, it has, fewer individuals (237 individuals ≥2.5 cm dbh per 0.1 ha) and more large trees (39.7% of individuals ≥10 cm dbh per 0.1 ha). The forest has a lower woody species richness (75 species ≥2.5 cm dbh per 0.1 ha). Apparently, the effects of selective timber extraction on structure, richness, and floristic composition are decrease floristic richness and density of individuals, decrease of lianas density and richness, and more individuals of secondary species, likes: Hedyosmum goudotianum Slms-Laubach var. goudatianum, Miconia resima Naud, and Palicourea calophlebia Standl.

STRUCTURE, SPATIAL DISTRIBUTION AND SEED YIELD FOR ANDIROBA (Carapa guianensis Aubl. IN SOUTH RORAIMA

Directory of Open Access Journals (Sweden)

Ademir R. Ruschel

2009-09-01

Full Text Available Andiroba is one of the Amazon species with great potential of exploration for timber and non-timberforest products (NFTPs. This work was carried out with the objective of studying the population structure,spatial distribution and seed yield in a native forest of andiroba in the south of Roraima state. A permanentsample plot of 300 x 300 m (9 ha was installed and all the trees with DBH equal or superior to 10 cm wereidentified, mapped and measured. In each tree, the light climate, crown form and lianas load were appraised.To identify the spatial distribution, the medium variance/average rate and the Morisita’s Index were used.The seed yield data were obtained by the seed weighing, being 145 trees monitored during 2006. Thepopulation presented a diametric distribution of the j inverted type, and a seed yield of 65,4 kg.ha-1 withaverage of 8,3 kg.tree-1 was observed. DBH ≥ 30 cm was considered as borderline for commercial seed yield,allowing stratifying the population in juveniles (DBH ≤ 30 cm and adults (DBH > 30 cm. The spatialdistribution analysis showed that adult individuals presented random distribution and the juveniles tendencyof grouping.

Dynamics of treefall gaps in a harvested forest in Misiones, Northern Argentine Dinámica de claros artificiales en un bosque aprovechado en Misiones, noreste de Argentina

Directory of Open Access Journals (Sweden)

Nardia Maria Luján Bulfe

2010-12-01

Full Text Available

This work evaluates the diameter growth of trees species of artificial gaps per ecological groups in a harvested forest considering two systems of harvest. The study was carried out in the Reserva de Biósfera Yabotí, in Misiones, Argentina. Fifteen permanent plots were established, each one with 4 hectares with effective area of measurement of one hectare. The three treatments were: conventional logging, reduced impact logging and control plot. All trees larger than 10 cm of diameter at breast height (DBH were measured, before (1998 and after the harvest (2006. Eighty-five species were registered. The average DBH diameter growth for all species was 0.41 cm yr-1 in the gap area, and 0.31 cm yr-1 for the control plot. The average diameter growth was 0.36 cm yr-1 for the reduced impact logging and 0.42 cm yr-1 for the conventional logging. In forests with high diversity, ecological groups are an important tool for the management and conservation. The reduced impact logging would be considered a less aggressive alternative for the forests in this region. 

doi: 10.4336/2010.pfb.30.64.311

Este trabajo evalúa el crecimiento diamétrico de especies arbóreas clasificadas en grupos ecológicos dentro de claros artificiales en un bosque estacional semideciduo aprovechado considerando dos sistemas de cosecha. El estudio fue desarrollado en la Reserva de Biosfera Yabotí, Misiones, Argentina. Se instalaron 15 parcelas permanentes, de cuatro hectáreas cada una, con un área efectiva de medición de una hectárea. Los tratamientos fueron tres: cosecha convencional, cosecha de impacto reducido y parcela testigo. Se registraron todos los ejemplares arbóreos mayores a 10 cm de diámetro a la altura del pecho (DAP antes (1998 y después de la cosecha (2006. La riqueza florística alcanzó un número de 85 especies. Para el conjunto de especies el crecimiento diamétrico promedio fue de 0,41 cm año-1 en área de claro y de 0,31 cm.año-1 en �

Stem biomass and volume models of selected tropical tree species ...

African Journals Online (AJOL)

Stem biomass and stem volume were modelled as a function of diameter (at breast height; Dbh) and stem height (height to the crown base). Logarithmic models are presented that utilise Dbh and height data to predict tree component biomass and stem volumes. Alternative models are given that afford prediction based on ...

[First time revealed small formations of lungs (under 2 cm in diameter). Dynamic follow-up or surgery?

Science.gov (United States)

Pavlov, Yu V; Rybin, V K

To develop the treatment algorithm in patients with first time revealed lung lesions smaller than 2 cm. The study included 110 patients with pathological lung lesions with small dimensions who have been treated in the Burdenko Clinic of Faculty Surgery for the period 1997-2013. All patients underwent surgical removal of lung tissue using different surgical approaches: 44 cases of videothoracoscopic resections, 43 video-assisted minithoracotomies, 23 minithoracotomies. There were 25 patients with lung cancer, 38 cases of benign tumours (hamartoma and tuberculoma) and 10 patients with disseminated tuberculosis thar required special treatment. Small pulmonary formations (from 0.5 to 2 cm) can be removed without morphological verification prior to surgery. Optimal surgical approach should be selected depending on the amount and size of formations. Management of solitary lung formation smaller than 0.5 cm that was newly diagnosed by computed tomography should include dynamic follow-up and performance of computed tomography in 3-6-12 months.

Estrutura e classificação de um remanescente de floresta ripária no município de Lages, SC

Directory of Open Access Journals (Sweden)

André Rosalvo Terra Nascimento

2011-01-01

Full Text Available This paper investigates aspects of classification and reports the diversity in a remnant of a riparian forest in Lages, Santa Catarina. Twenty-five plots were allocated along the river, and all trees with diameter at breast height (DBH greater than or equal to 5 cm were measured. The community had 67 tree species and a canopy with emergent species. The diameter distribution showed a self-regenerating community, with a large number of small trees and high values of density and basal area per hectare. The classification separated the sites with higher basal area, presence of Cabralea canjerana and Myrcia hatschbachii and the sites with presence of generalist species Celtis iguanaea and Ilex brevicuspis, denoting a large environmental variability in this forest.

Floristic and structural status of forests in permanent preservation areas of Moju river basin, Amazon region.

Science.gov (United States)

Oliveira, J C; Vieira, I C G; Almeida, A S; Silva, C A

2016-01-01

The goal of this study is to analyze the floristic patterns and the structure of disturbed and undisturbed upland forests, in Permanent Preservation Areas (PPAs) along the Moju river, in the Brazilian state of Pará. Trees with a diameter equal to or larger than 10cm at 1.30m from the ground (DBH) ≥10cm were analyzed for the upper stratum. For the middle stratum, individuals with DBH between 4.99 and 9.99cm were sampled. Forty-five families and 221 species were found in disturbed forests, and 43 families and 208 species in undisturbed forests. Floristic similarity was high between strata and between forest types, with values above 50%. Similarity was highest between middle strata. The most species-abundant families in undisturbed forests were Fabaceae, Sapotaceae, Chrysobalanaceae and Myrtaceae; the species with the highest density there were Eschweilera grandiflora, Licania sclerophylla and Zygia cauliflora. In disturbed forests, the dominant families were Fabaceae, Sapotaceae, Lecythidaceae and Melastomataceae. The Shannon-Wiener diversity index was 3.21 for undisturbed forests and 2.85 for disturbed forests. Non-metric multidimensional scaling (MDS) analysis did not group the forests by their floristic composition in both upper and middle strata. Overall, the PPA forests along the Moju river, even if disturbed, did not show major floristic changes but substantially change their structural characteristics.

Floristic and structural status of forests in permanent preservation areas of Moju river basin, Amazon region

Directory of Open Access Journals (Sweden)

J. C. Oliveira

Full Text Available Abstract The goal of this study is to analyze the floristic patterns and the structure of disturbed and undisturbed upland forests, in Permanent Preservation Areas (PPAs along the Moju river, in the Brazilian state of Pará. Trees with a diameter equal to or larger than 10cm at 1.30m from the ground (DBH ≥10cm were analyzed for the upper stratum. For the middle stratum, individuals with DBH between 4.99 and 9.99cm were sampled. Forty-five families and 221 species were found in disturbed forests, and 43 families and 208 species in undisturbed forests. Floristic similarity was high between strata and between forest types, with values above 50%. Similarity was highest between middle strata. The most species-abundant families in undisturbed forests were Fabaceae, Sapotaceae, Chrysobalanaceae and Myrtaceae; the species with the highest density there were Eschweilera grandiflora, Licania sclerophylla and Zygia cauliflora. In disturbed forests, the dominant families were Fabaceae, Sapotaceae, Lecythidaceae and Melastomataceae. The Shannon-Wiener diversity index was 3.21 for undisturbed forests and 2.85 for disturbed forests. Non-metric multidimensional scaling (MDS analysis did not group the forests by their floristic composition in both upper and middle strata. Overall, the PPA forests along the Moju river, even if disturbed, did not show major floristic changes but substantially change their structural characteristics.

A tape-controlled remote automatic diameter measurement machine

International Nuclear Information System (INIS)

Jennison, W.; Salmon, A.M.

1978-01-01

The machine is designed for the automatic measurement of fuel pins after irradiation in the fast reactors and is a modified version of a machine which has been in use for several years. These modifications consist of mechanical improvements and solid state control circuitry but the design criteria are unchanged. Irradiated fuel pins with diameters up to 0.875 in. are measured at fixed axial positions and angular intervals. Axial stepping of either 1 cm or 1 in. with a standard deviation of 5 x 10 -4 in. and angular rotation by multiples of 18 0 with a non-cumulative error of 1 0 can be selected. Data on axial position to 0.1 in. or 0.1 cm and fuel element diameter to 5 x 10 -5 in. are both punched and printed out for computer evaluation. The standard deviation of a single measurement on cylindrical specimens with an eccentricity of up to at least 0.1 in. should be no worse than 1 x 10 -4 in. No operator attention is required after the pin is positioned in the machine and 40 sets of 10 diameter readings at 36 0 intervals can be performed in an hour. Switches can be set between 1 and 99 to terminate an examination when power is switched off with the machine in its rest position. (author)

Modeling stem increment in individual Pinus occidentalis Sw. trees in La Sierra, Dominican Republic

Energy Technology Data Exchange (ETDEWEB)

Bueno, S.; Bevilacqua, E.

2010-07-01

One of the most common and important tree characteristics used in forest management decision-making is tree diameter-at-breast height (DBH). This paper presents results on an evaluation of two growth functions developed to model stem diameter increases in individual Pinus occidentalis Sw. trees in La Sierra, Dominican Republic. The first model was developed in order to predict future DBH (FDM) at different intervals of time and the other for predicting growth, that is, periodic annual diameter increment (PADIM). Each model employed two statistical techniques for fitting model parameters: stepwise ordinary least squares (OLS) regression, and mixed models. The two statistical approaches varied in how they accounted for the repeated measurements on individual trees over time, affecting standard error estimates and statistical inference of model parameters. Each approach was evaluated based on six goodness of- fit statistics, using both calibration and validation data sets. The objectives were 1) to determine the best model for predicting future tree DBH; 2) to determine the best model for predicting periodic annual diameter increment, both models using tree size, age, site index and different indices of competitive status; and 3) compare which of these two modeling approaches predicts better the future DBH. OLS provided a better fit for both of the growth functions, especially in regards to bias. Both models showed advantages and disadvantages when they were used to predict growth and future diameter. For the prediction of future diameter with FDM, accuracy of predictions were within one centimeter for a five-year projection interval. The PADIM presented negligible bias in estimating future diameter, although there was a small increase in bias as time of prediction increased. As expected, each model was the best in estimating the response variable it was developed for.. However, a closer examination of the distribution of errors showed a slight advantage of the FDM

Carbon Stocks of Fine Woody Debris in Coppice Oak Forests at Different Development Stages

Directory of Open Access Journals (Sweden)

Ender Makineci

2017-06-01

Full Text Available Dead woody debris is a significant component of the carbon cycle in forest ecosystems. This study was conducted in coppice-originated oak forests to determine carbon stocks of dead woody debris in addition to carbon stocks of different ecosystem compartments from the same area and forests which were formerly elucidated. Weight and carbon stocks of woody debris were determined with recent samplings and compared among development stages (diameter at breast height (DBH, D1.3m, namely small-diameter forests (SDF = 0–8 cm, medium diameter forests (MDF = 8–20 cm, and large-diameter forests (LDF = 20–36 cm. Total woody debris was collected in samplings; as bilateral diameters of all woody debris parts were less than 10 cm, all woody parts were in the “fine woody debris (FWD” class. The carbon concentrations of FWD were about 48% for all stages. Mass (0.78–4.92 Mg·ha−1 and carbon stocks (0.38–2.39 Mg·ha−1 of FWD were significantly (p > 0.05 different among development stages. FWD carbon stocks were observed to have significant correlation with D1.3m, age, basal area, and carbon stocks of aboveground biomass (Spearman rank correlation coefficients; 0.757, 0.735, 0.709, and 0.694, respectively. The most important effects on carbon budgets of fine woody debris were determined to be coppice management and intensive utilization. Also, national forestry management, treatments of traditional former coppice, and conversion to high forest were emphasized as having substantial effects.

Scaling law in free walking of mice in circular open fields of various diameters.

Science.gov (United States)

Shoji, Hiroto

2016-03-01

Open-field tests are routinely used to study locomotor activity in rodents. I studied the effects of apparatus size on rodent locomotor activity, specifically with respect to how resting and walking periods are interwoven. I explored the open-field behavior of mice utilizing circular open fields of various diameters. When the diameter of the test apparatus was greater than 75 cm, the durations of the resting and moving periods of free walking behavior obeyed bounded power-law distribution functions. I found that the properties of the scaling exponents and model selection became similar for test apparatus diameters greater than 75 cm. These results can provide a guide for the selection of the size of the test apparatus for use in the study of the open-field behavior of rodents.

Dose and diameter relationships for facial, trigeminal, and acoustic neuropathies following acoustic neuroma radiosurgery

International Nuclear Information System (INIS)

Flickinger, John C.; Kondziolka, Douglas; Lunsford, L. Dade

1996-01-01

Purpose and objective: To define the relationships between dose and tumor diameter for the risks of developing trigeminal, facial, and acoustic neuropathies after acoustic neuroma radiosurgery, a large single-institution experience was analyzed. Materials and methods: Two hundred and thirty-eight patients with unilateral acoustic neuromas who underwent Gamma knife radiosurgery between 1987-1994 with 6-91 months of follow-up (median 30 months) were studied. Minimum tumor doses were 12-20 Gy (median 15 Gy). Transverse tumor diameter varied from 0.3-5.5 cm (median 2.1 cm). The relationships of dose and diameter to the development of cranial neuropathies were delineated by multivariate logistic regression. Results: The development of post-radiosurgery neuropathies affecting cranial nerves V, VII, and VIII were correlated with minimum tumor dose and transverse tumor diameter (P min for VIII where P=0.10). A comparison of the dose-diameter response curves showed the acoustic nerve to be the most sensitive to doses of 12-16 Gy and the facial nerve to be the least sensitive. Conclusion: The risks of developing trigeminal, facial, and acoustic neuropathies following acoustic neuroma radiosurgery can be predicted from the transverse tumor diameter and the minimum tumor dose using models constructed from data presently available

CONTRIBUIÇÃO DOS ATRIBUTOS QUÍMICOS DO SOLO NO DESENVOLVIMENTO VEGETATIVO DO PARICÁ EM DIFERENTES SISTEMAS DE CULTIVO

Directory of Open Access Journals (Sweden)

Possidônio Guimarães Rodrigues

2016-01-01

Full Text Available This study aimed to evaluate some chemical components of an Oxisol and the relationship with the vegetative development of paricá [ Schizolobium amazonicum (Huber ex Ducke] in different cropping systems in reforestation areas in the municipality of Tailandia, northeast paraense. Evaluated the PP [paricá x pueraria ( Pueraria phaseoloides ], PA [paricá x acacia ( Acacia mangium ] and P (monoculture paricá systems conducted in 5 years by the company G.M. Sufredini Industrial LTDA and collected soil samples at a depth of 0-20 cm for analysis of pH, total C and N, H + Al, available P, exchangeable Ca, Mg, K and Al and calculated values of C/N, SB, T, V and m. The vegetative development of paricá was assessed by survival, mortality and the number of defective plants beyond the DBH. The results showed that the increase in nitrogen content of the soil in PP treatment, the low soil fertility in PA treatment, but where paricá achieved the highest average in diameter (DBH = 16.64 cm and greater survival rate in P treatment (90.63%. It was concluded that the soil-plant relationship in paricá and pueraria systems and monoculture paricá contributed to the establishment of individuals paricá.

Safety and Effectiveness of UFE in Fibroids Larger than 10 cm

Energy Technology Data Exchange (ETDEWEB)

Bérczi, Viktor, E-mail: berczi@hotmail.com; Valcseva, Éva, E-mail: evapeneva@gmail.com; Kozics, Dóra, E-mail: dora.kozics@gmail.com; Kalina, Ildikó, E-mail: ilkalina@t-online.hu; Kaposi, Pál, E-mail: kaposipal@gmail.com [Semmelweis University, Department of Radiology and Oncotherapy (Hungary); Sziller, Péter, E-mail: psziller@t-online.hu; Várbíró, Szabolcs, E-mail: varbiroszabolcs@gmail.com [Semmelweis University, 2nd Department of Gynaecology and Obstetrics (Hungary); Botos, Erzsébet Mária, E-mail: erzsebetbotos@gmail.com [Semmelweis University, Department of Radiology and Oncotherapy (Hungary)

2015-10-15

IntroductionEarly literature suggested that the size of the uterus, the size of the dominant fibroid, and the amount of applied embolization particles would be the risk factors for major postprocedural complications, but recent publications have confuted these early results. The purpose of our study was to evaluate whether the size of the dominant fibroid would influence the complication rate and effectiveness in a large single-center cohort.Patients and MethodsFrom 28 April 2008 until 31 December 2012, 303 patients had uterine artery embolization (UAE). 262 patients had small [largest diameter <10 cm (Group 1)], 41 patients had large [largest diameter >10 cm (Group 2)] fibroid. UAE was performed from unilateral femoral access using 500–710 and 355–500 µm polyvinyl alcohol particles. Periprocedural and postprocedural complications and numerical analog quality-of-life scores (0—unbearable symptoms; 100—perfect quality of life) were listed and statistically analyzed.ResultsDuring the mean follow-up time [7.79 ± 5.16 (SD) month], data on 275 patients (275/303 = 90.8 %) were available. Quality-of-life score was 33.3 ± 23.5 and 33.5 ± 24.1 before, whereas 85.6 ± 16.0 and 81.5 ± 23.5 after UAE in Group 1 and Group 2, respectively, (Mann–Whitney U test one-sided, p = 0.365). There were 4 myoma expulsions, 1 acute myomectomy, and 2 acute hysterectomies reported from Group 1, meanwhile 1 myoma expulsion, 1 acute myomectomy, and 2 acute hysterectomies were documented from Group 2 (NS differences).ConclusionThere was no significant difference in the effectiveness and in the number of minor and major complications between fibroids with <10 cm largest diameter compared to those >10 cm.

ESTRUTURA, DISTRIBUIÇÃO ESPACIAL E PRODUÇÃO DE SEMENTES DE ANDIROBA (Carapa guianensis Aubl. NO SUL DO ESTADO DE RORAIMA

Directory of Open Access Journals (Sweden)

Helio Tonini

2009-01-01

Full Text Available Andiroba is one of the Amazon species with great potential of exploration for timber and non-timber forest products (NFTPs. This work was carried out with the objective of studying the population structure, spatial distribution and seed yield in a native forest of andiroba in the south of Roraima state. A permanent sample plot of 300 x 300 m (9 ha was installed and all the trees with DBH equal or superior to 10 cm were identified, mapped and measured. In each tree, the light climate, crown form and lianas load were appraised. To identify the spatial distribution, the medium variance/average rate and the Morisita¿s Index were used. The seed yield data were obtained by the seed weighing, being 145 trees monitored during 2006. The population presented a diametric distribution of the j inverted type, and a seed yield of 65,4 kg.ha-1 with average of 8,3 kg.tree-1 was observed. DBH > 30 cm was considered as borderline for commercial seed yield, allowing stratifying the population in juveniles (DBH > 30 cm and adults (DBH > 30 cm. The spatial distribution analysis showed that adult individuals presented random distribution and the juveniles tendency of grouping.

STRUCTURE, SPATIAL DISTRIBUTION AND SEED YIELD FOR ANDIROBA (Carapa guianensis Aubl. IN SOUTH RORAIMA

Directory of Open Access Journals (Sweden)

Helio Tonini

2009-10-01

Full Text Available Andiroba is one of the Amazon species with great potential of exploration for timber and non-timber forest products (NFTPs. This work was carried out with the objective of studying the population structure, spatial distribution and seed yield in a native forest of andiroba in the south of Roraima state. A permanent sample plot of 300 x 300 m (9 ha was installed and all the trees with DBH equal or superior to 10 cm were identified, mapped and measured. In each tree, the light climate, crown form and lianas load were appraised. To identify the spatial distribution, the medium variance/average rate and the Morisita’s Index were used. The seed yield data were obtained by the seed weighing, being 145 trees monitored during 2006. The population presented a diametric distribution of the j inverted type, and a seed yield of 65,4 kg.ha-1 with average of 8,3 kg.tree-1 was observed. DBH ≥ 30 cm was considered as borderline for commercial seed yield, allowing stratifying the population in juveniles (DBH ≤ 30 cm and adults (DBH > 30 cm. The spatial distribution analysis showed that adult individuals presented random distribution and the juveniles tendency of grouping.

Optic nerve sheath diameter on fat-saturated T2-weighted orbital MR imaging reflects intracranial pressure

International Nuclear Information System (INIS)

Watanabe, Arata; Kinouchi, Hiroyuki; Horikoshi, Toru; Uchida, Mikito; Sakatsume, Satoshi

2009-01-01

Although dilated optic nerve sheath (ONS) is observed in the setting of increased intracranial pressure (ICP) such as idiopathic intracranial hypertension or hydrocephalus, the relationship between ONS diameter and ICP is unclear. We analyzed the relationship between subdural pressure measured during surgery in patients with chronic subdural fluid collections and ONS diameter measured on MR images. Orbital thin slice fat-saturated MR images were obtained within 24 hours before surgery and ONS diameters were measured just behind the optic globe. Subdural pressure was measured using a manometer before opening the dura mater during surgery. Significant correlation was found between the ONS diameter and subdural pressure (y=0.0618x+4.8219. y: ONS diameter (mm), x: subdural pressure (cmH 2 O), correlation coefficient: 0.505). The ONS diameter before surgery (6.1±0.7 mm) was significantly reduced after surgery (4.8±0.9 mm, p=0.003). Increased ONS diameter on MR images is a strong indicator of increased ICP we propose 6 mm as the normal limit of diameter just behind the eyeball because this value corresponds to the upper normal limit of ICP of around 20 cmH 2 O with above mentioned approximate curve. (author)

Foxo1 regulates Dbh expression and the activity of the sympathetic nervous system in vivo

Directory of Open Access Journals (Sweden)

Daisuke Kajimura

2014-10-01

Full Text Available The transcription factor FoxO1 regulates multiple physiological processes. Here, we show that FoxO1 is highly expressed in neurons of the locus coeruleus and of various sympathetic ganglions, but not in the adrenal medulla. Consistent with this pattern of expression, mice lacking FoxO1 only in sympathetic neurons (FoxO1Dbh−/− display a low sympathetic tone without modification of the catecholamine content in the adrenal medulla. As a result, FoxO1Dbh−/− mice demonstrate an increased insulin secretion, improved glucose tolerance, low energy expenditure, and high bone mass. FoxO1 favors catecholamine synthesis because it is a potent regulator of the expression of Dbh that encodes the initial and rate-limiting enzyme in the synthesis of these neurotransmitters. By identifying FoxO1 as a transcriptional regulator of the sympathetic tone, these results advance our understanding of the control of some aspects of metabolism and of bone mass accrual.

Critical current density and microwave surface resistance of 5-cm-diameter YBCO films on LaAlO3 substrates prepared by MOD using an infrared image furnace

International Nuclear Information System (INIS)

Manabe, T.; Kondo, W.; Yamaguchi, I.; Sohma, M.; Tsuchiya, T.; Tsukada, K.; Mizuta, S.; Kumagai, T.

2005-01-01

Inductive critical current density (J c ) and microwave surface resistance (R s ) were investigated for 0.7-μm-thick epitaxial YBa 2 Cu 3 O 7-y (YBCO) films on 5-cm-diameter LaAlO 3 substrates prepared by a chemical solution-based metal organic deposition (MOD) process using an infrared image furnace. By varying the heating rate at ramp during the final heat treatment, we obtained various orientations of YBCO; the c- and a-axis orientation at a slower rate, i.e., 20-100 deg C/min while the pure c-axis orientation at a faster rate, 200 deg C/min. The c-axis-oriented YBCO films showed excellent superconducting properties; for example, a high inductive-J c (77 K) of 2.6 MA/cm 2 and low R s (12 GHz)'s of 0.24 and 0.52 mΩ at 50 and 77 K, respectively, by a sapphire rod resonator method. The c- and a-axis-oriented films exhibited a lower J c and a higher R s . It was found that the J c and R s values of MOD-derived YBCO films showed a strong correlation; approximately, R s is inversely proportional to J c . This correlation is in good agreement with a previous report by Ohshima et al. for sputtered-YBCO films on BaSnO 3 -buffered MgO substrates

Design and performances of the 5 cm microtron

International Nuclear Information System (INIS)

Zakharov, M.A.; Melekhin, V.N.; Sukhachev, V.Ya.

1979-01-01

Described is the 5 cm microtron with 14 orbits and the 10 MeV maximum energy of electron beam, the 10 μA pulse current and the 100 W average power. The electromagnet of the armoured type with the external diameter of 680 mm, the height of 260 mm, the pole gap of 62 mm is designed for generation of the 0.32 T magnetic field. The vacuum chamber is made of stainless steel and it is totally separated from the electromagnet. An accelerating resonator is inserted through the connection pipe. An intermetallic thermoemitter of the iridium-cerium alloy is used in the microtron. The acceleration regime of the first type with zero initial phases is used in the microtron. The prospects of utilization of the 5-cm microtron is illustrated

New Models for Predicting Diameter at Breast Height from Stump Dimensions

Science.gov (United States)

James A. Westfall

2010-01-01

Models to predict dbh from stump dimensions are presented for 18 species groups. Data used to fit the models were collected across thirteen states in the northeastern United States. Primarily because of the presence of multiple measurements from each tree, a mixed-effects modeling approach was used to account for the lack of independence among observations. The...

Crecimiento y mortalidad en juveniles de siete especies arbóreas en un bosque muy húmedo tropical intervenido de Costa Rica

Directory of Open Access Journals (Sweden)

Grace Sáenz

1999-06-01

Full Text Available Se estudiaron por un período de cuatro años los patrones de crecimiento en diámetro y altura, así como la mortalidad de brinzales (individuos e 0.30 m altura y Diameter and height growth patterns, as well as the incidence of seedling (individuals e0.3 m and <1.5 m in height and sapling (individual e1.5 m in height and 9.9 cm DBH mortality were studied for four years in a forest under two types of silvicultural intervention. The study is based on anual measurements of individuals from the two size categories marked one year after harvest. In the case of the seedlings, the parameters evaluated were: total height and diameter at 10 cm from the base. For the sapling category, the diameter at 1.30 m was also measured. The Clark and Clark methodology was used to evaluate the crown illumination index of all individuals. Seven tree species were studied: Cecropia (two species, Cecropia insignis Liebm. and Cecropia obtusifolia Bertol., Laetia procera (Poepp. Eichler, Rollinia pittieri Saff, Apeiba membranacea Spruce ex Benth., Virola koschnyi Warb. y Virola sebifera Aubl. The Cecropia spp. seedlings showed the highest diameter and height growth rates, with annual mean increments in diameter of 7.8 mm/years and height of 188 cm/years. The L. procera saplings had the greatest diameter and height growth, with rates of 7.0 mm/year and 86 cm/year, respectively. Only in the case of Cecropia spp. and V. sebifera are diameter and height growth significantly correlated with the crown light index. Seedlings had the highest mortality rates in all species except Cecropia spp. and R. pittieri, where the sapling mortality was greater.

Projeção da distribuição diamétrica de uma floresta explorada seletivamente na Amazônia Ocidental Projection of the diameter distribution in a selective logging forest in the western Amazon

Directory of Open Access Journals (Sweden)

Sumaia S. Vasconcelos

2009-03-01

height (DBH were taken in 1996. The forest was selectively logged in 1997 and DBHs were re-measured in two different occasions, 1999 and 2001. A probabilistic transition matrix (Markov Chain was used to project the diameter distribution of the number of surviving trees in each diameter class. The model was first tested to project the diameter distribution in 2001, based on DBH measurements from 1997 and 1999. When the projected diameter distribution for 2001 was compared with the field data from the same year, a Chi-squared test (α = 0.05 showed that there was not significant difference between the expected and observed diameter distribution. After that, a projection for 2005 (four years in the future was run using DBH measurements from 1997 to 2001, indicating that mortality rate was similar to 2001. If repeated the rate of recruitment of 2005, the total number of trees will be higher than observed in 2001. The dynamics of the studied forest suggests that there is not a definitive pattern to changes in diameter distribution and mortality, which indicates a stochastic or probabilistic pattern. This pattern is better modeled by the Markov Chain to project the forest dynamics of studied area, and can help on determination of timber harvesting or the tendencies of forest dynamics in a near future.

Correlation of inferior vena cava (ivc) diameter and central venous pressure (cvp) for fluid monitoring in icu

International Nuclear Information System (INIS)

Khalil, A.; Hayat, A.

2015-01-01

To determine intravascular fluid status in critically ill patients using inferior vena cava diameter and correlating it with central venous pressure. Study Design: Cross sectional study. Place and Duration of Study: Intensive care department, Military Hospital Rawalpindi from Jan 2013 to Aug 2013. Material and Methods: We included 115 adult patients of both genders in age range of 18 to 87 years by consecutive sampling admitted in intensive care unit. Ultrasound guided IVC diameter was assessed in supine patients. Data was simultaneously collected from the CVP catheter. Variables included in study were age, gender, CVP, IVC diameter. Results: CVP ranged from -4 to 26 cm H/sub 2/O with mean of 8 cm H/sub 2/O (SD = 6.24). Mean IVC diameters increased with increase in CVP. Correlation between CVP and max IVC diameter was moderate and significant (r = 0.53, p < 0.001). Correlation between CVP and min IVC diameter was also moderate and significant (r = 0.58, p < 0.001). Conclusion: A simple bedside sonography of inferior vena cava diameter correlates well with extremes of CVP values and can be helpful in assessing intravascular fluid status in these patients. (author)

Effects of soil water table regime on tree community species richness and structure of alluvial forest fragments in Southeast Brazil.

Science.gov (United States)

Silva, A C; Higuchi, P; van den Berg, E

2010-08-01

In order to determine the influence of soil water table fluctuation on tree species richness and structure of alluvial forest fragments, 24 plots were allocated in a point bar forest and 30 plots in five forest fragments located in a floodplain, in the municipality of São Sebastião da Bela Vista, Southeast Brazil, totalizing 54, 10 X 20 m, plots. The information recorded in each plot were the soil water table level, diameter at breast height (dbh), total height and botanical identity off all trees with dbh > 5 cm. The water table fluctuation was assessed through 1 m deep observation wells in each plot. Correlations analysis indicated that sites with shallower water table in the flooding plains had a low number of tree species and high tree density. Although the water table in the point bar remained below the wells during the study period, low tree species richness was observed. There are other events taking place within the point bar forest that assume a high ecological importance, such as the intensive water velocity during flooding and sedimentation processes.

Effects of soil water table regime on tree community species richness and structure of alluvial forest fragments in Southeast Brazil

Directory of Open Access Journals (Sweden)

AC. Silva

Full Text Available In order to determine the influence of soil water table fluctuation on tree species richness and structure of alluvial forest fragments, 24 plots were allocated in a point bar forest and 30 plots in five forest fragments located in a floodplain, in the municipality of São Sebastião da Bela Vista, Southeast Brazil, totalizing 54, 10 X 20 m, plots. The information recorded in each plot were the soil water table level, diameter at breast height (dbh, total height and botanical identity off all trees with dbh > 5 cm. The water table fluctuation was assessed through 1 m deep observation wells in each plot. Correlations analysis indicated that sites with shallower water table in the flooding plains had a low number of tree species and high tree density. Although the water table in the point bar remained below the wells during the study period, low tree species richness was observed. There are other events taking place within the point bar forest that assume a high ecological importance, such as the intensive water velocity during flooding and sedimentation processes.

Above- and Belowground Biomass Models for Trees in the Miombo Woodlands of Malawi

Directory of Open Access Journals (Sweden)

Daud J. Kachamba

2016-02-01

Full Text Available In this study we present general (multiple tree species from several sites above- and belowground biomass models for trees in the miombo woodlands of Malawi. Such models are currently lacking in the country. The modelling was based on 74 trees comprising 33 different species with diameters at breast height (dbh and total tree height (ht ranging from 5.3 to 2 cm and from 3.0 to 25.0 m, respectively. Trees were collected from four silvicultural zones covering a wide range of conditions. We tested different models including dbh, ht and wood specific gravity ( ρ as independent variables. We evaluated model performance using pseudo-R2, root mean square error (RMSE, a covariance matrix for the parameter estimates, mean prediction error (MPE and relative mean prediction error (MPE%. Computation of MPE% was based on leave-one-out cross-validation. Values of pseudo-R2 and MPE% ranged 0.82–0.97 and 0.9%–2.8%, respectively. Model performance indicated that the models can be used over a wide range of geographical and ecological conditions in Malawi.

Studies of flow configurations up to the critical phenomenon at 80 kg/cm2

International Nuclear Information System (INIS)

Raisson, C.

1968-12-01

Tests performed at 80 kg/cm 2 allow to study two-phase flows and their evolution up to the critical heating. Three measurement methods have been used simultaneously: thermocouples, conductivity probe, short length pressure drops after the output. The 282 cm length stainless steel channel has an internal diameter of 0.6 cm and a wall thickness of 0.2 cm. Flow configuration results are comparable to those of the literature with some precision regarding some transition zones. Two critical heating regimes have been highlighted. The results demonstrate the interest of the method and the importance of hydrodynamic parameters on the critical heating phenomenon [fr

Sonographic Measurement of AP Diameter and Wall Thickness of the Gallbladder

International Nuclear Information System (INIS)

Chung, S.K.; Lee, J. S.; Huh, S. J.; Baek, I. S.

1982-01-01

Call bladder size and wall thickness are important in the assessment of the pathologic condition. Authors have measured AP diameter of gallbladder and evaluated the change of all thickness between fasting and postprandial state. The results were as follows: 1. The mean of AP diameter was 2.18+0.49cm 2. The wall thickness was 2.7+0.6mm in fasting state and 3.3+0.8mm after meal. 3. The increase of wall thickness after fat meal was significant statistically(p<.001)

Establishment of dosimetric references for high energy X-ray beams of very small field sizes (≤ 1 cm2) used in radiotherapy

International Nuclear Information System (INIS)

Dufreneix, Stephane

2014-01-01

The French primary standard dosimetry laboratory 'Laboratoire National Henri Becquerel' is in charge of the establishment of dosimetric standards for ionizing radiation beams. Absolute dose measurements are thus available for X-Ray beams used in radiotherapy for field sizes between 10 and 2 cm. Since the miniaturization of absolute dosimeters is not possible for smaller field sizes, a dose area product (DAP) has been suggested as a substitute to the absorbed dose at a point.In order to measure a DAP with dosimeters which sensitive surface is larger than the beam, a graphite calorimeter with a sensitive surface of 3 cm diameter was designed, built and tested. An ionization chamber with the same diameter was realized and tested to transfer the dosimetric references to the end users. Its calibration factor in terms of DAP was determined in circular beams of 2, 1 and 0.75 cm diameter with an uncertainty smaller than 0.7 %. The two-Dimension relative dose distribution was measured thanks to a diamond dosimeter, a PinPoint ionization chamber and gafchromic films, using a specific protocol. Both approaches, respectively based on a PDS and an absorbed dose to water at a point, were in good agreement in the 2 cm beam. Correction factors determined from Monte Carlo simulations and measured dose distributions were needed for this comparison. The calibration factor of the large ionization chamber in the 1 and 0.75 cm diameter beams were in good agreement within the uncertainties but a gap of -2.6 % was found with the one established in the 2 cm diameter beam. As a result, the DAP can be used if the sensitive surface is much larger than the beam section. (author) [fr

Diversity and frequency of Acacia spp. in three regions in the ...

African Journals Online (AJOL)

bismillha

2012-06-28

Jun 28, 2012 ... effect of soil texture on the frequency of Acacia spp. ... structure. There were great differences between species in relation to diameter distribution. The study shows the scarcity of large diameter trees and also in some cases ... Key words: Acacia, diversity, soil texture, diameter at breast height (DBH) classes.

Growth variation and heritability in a second-generation Eucalyptus urophylla progeny test at Lad Krating Plantation, Chachoengsao province, Thailand

Directory of Open Access Journals (Sweden)

Lucky Nhlanhla Dlamini

2017-06-01

Full Text Available In Thailand, Eucalyptus urophylla was introduced with the main purpose of supplying raw material for pulp and chip wood production. The demand for genetically improved seed is increasing to support high productivity plantation establishment. One of the tree improvement activities established to meet the high demand for improved seed was a second generation progeny test at Lad Krating Plantation, Thailand to provide the best material for the successful plantation program. The aim of the current study was to compare growth variation of the first and second generation of Eucalyptus urophylla progeny that could provide information on suitable families for improved quality seed. The progeny test comprised the best 45 half-sib families selected from 80 half-sib families of the first-generation progeny test. The design of the progeny test was a randomized and complete block design (16 trees/plot × 45 plots/block × 9 blocks, with 4 rows of 4 trees at a spacing of 2 m × 1 m. Growth was assessed at age 3 yr. The average height and diameter at breast height over bark (DBH, was 13.72 m, and 8.75 cm, respectively. There were highly significant (p < 0.01 differences among provenances and families in both height and DBH. The individual heritability values for height and DBH were 0.48 and 0.60, respectively. The family heritability values for height and DBH were 0.98 and 0.99, respectively. These 45 half-sib families proved to be genetically superior ensuring higher productivity and contributing to the success of the Forest Industry Organization plantation at Lad Krating.

Evaluation of a xenogeneic acellular collagen matrix as a small-diameter vascular graft in dogs--preliminary observations.

Science.gov (United States)

Nemcova, S; Noel, A A; Jost, C J; Gloviczki, P; Miller, V M; Brockbank, K G

2001-01-01

Autogenous veins are the materials of choice for arterial reconstruction. In the absence of autogenous material, prosthetic materials are used. However, vascular prostheses of less than 0.4 cm in diameter have low long-term patency. This study was designed to determine if cells would infiltrate an engineered xenogeneic biomaterial used as a small diameter arterial graft in dogs and, if so, to determine the phenotype of the infiltrating cells. Nine acellular xenogeneic grafts (0.4 cm in diameter, 5 cm long), composed of porcine collagen derived from the submucosa of the small intestine and type I bovine collagen, were implanted as end to-end interposition grafts in femoral arteries of five male mongrel dogs (total of nine grafts). All dogs received daily aspirin (325 mg). Patency of implanted grafts was monitored weekly by Duplex ultrasonography. After 9 weeks, or earlier in case of blood flow reduction by at least 75%, grafts were explanted and prepared for light or electron microscopy to evaluate cellularization. Eight of nine grafts remained patent up to 9 weeks. At explant, diameters were 0.31 +/- 0.02 cm at the midgraft, and 0.14 +/- 0.01 and 0.19 +/- 0.01 cm at the proximal and distal anastomoses. At explant, cells of mesenchymal origin (endothelial cells, smooth muscle cells, myofibroblasts) were embedded in the extracellular matrix of the graft scaffold. Minimal evidence of cellular inflammatory reaction and no aneurysmal dilatation or thrombus formation was detected. Variable degrees of hyperplasia were present at proximal and distal anastomoses. This preliminary study demonstrates that a collagen-based xenogeneic biomaterial provides a scaffold for cellularization when used for arterial reconstruction in dogs.

Ground level cosmic ray pulse height spectrum of a 7. 5 cm diameter spherical NaI(Tl) scintillation detector for energy region below 5 MeV

Energy Technology Data Exchange (ETDEWEB)

Nagaoka, Toshi; Saito, Kimiaki; Moriuchi, Shigeru

1988-09-01

Ground level cosmic ray pulse height spectrum of a 7.5 cm diameter spherical NaI(Tl) scintillation detector was evaluated through stripping operation based on a pulse height spectrum measured on the sea and high precision response functions of the detector for U-series, Th-series and /sup 40/K. The exposure rate calculated from the determined cosmic ray pulse height spectrum was 0.21 R/h eq., which agreed well with that obtained from another method. The shape of the pulse height spectrum showed similarity to that measured at the altitude of 16,000 ft, especially in the energy region of 0 to 3 MeV. The principle of the adopted method is rather plain, however, the reliability of the spectrum is satisfactory. As the pulse height spectrum is a common information to any analytical method for environmental gamma ray using NaI(Tl) scintillation detector, it is expected to be used for simple and precise separation of cosmic ray component involved in the enviromental pulse height spectrum.

Ground level cosmic ray pulse height spectrum of a 7.5 cm diameter spherical NaI(Tl) scintillation detector for energy region below 5 MeV

International Nuclear Information System (INIS)

Nagaoka, Toshi; Saito, Kimiaki; Moriuchi, Shigeru

1988-01-01

Ground level cosmic ray pulse height spectrum of a 7.5 cm diameter spherical NaI(Tl) scintillation detector was evaluated through stripping operation based on a pulse height spectrum measured on the sea and high precision response functions of the detector for U-series, Th-series and 40 K. The exposure rate calculated from the determined cosmic ray pulse height spectrum was 0.21 μR/h eq., which agreed well with that obtained from another method. The shape of the pulse height spectrum showed similarity to that measured at the altitude of 16,000 ft, especially in the energy region of 0 to 3 MeV. The principle of the adopted method is rather plain, however, the reliability of the spectrum is satisfactory. As the pulse height spectrum is a common information to any analytical method for environmental gamma ray using NaI(Tl) scintillation detector, it is expected to be used for simple and precise separation of cosmic ray component involved in the enviromental pulse height spectrum. (author)

6 Structural variation in mangrove forests of the estuary of the River Itabapoana, ES-RJ

Directory of Open Access Journals (Sweden)

Elaine Bernini

2010-03-01

Full Text Available We analyzed the structure of 13 sites of mangrove vegetation in the Itabapoana estuary by use of the methodology of permanent plots. Considering all individuals >1m within the plots, the average height of forests ranged from 4.0 to 10.1m, the average DBH (diameter at breast height ranged from 3.7 to 13.5cm, the basal area of living individuals was 13.5 to 48.3m2.ha-1, and the density of trunks was 1,475 to 21,000 trunks.ha-1. Overall, there was a greater contribution of the live basal area in relation to diameter >10.0cm (59%. Forests with better structural development exhibited a dominance of Avicennia germinans (L. Stearn, while Laguncularia racemosa (L. Gaertn. f. was dominant in less-developed forests. Our results showed that environmental features and biotic factors contribute to mangrove differentiation among sites. Such differences highlight the peculiarities of each mangrove and emphasize the need of specific management plans for ecosystem maintenance.

A small diameter, flexible, all attitude, self-contained germanium spectrometer. Operator's manual

International Nuclear Information System (INIS)

Bordzindki, R.L.; Lepel, E.A.; Reeves, J.H.; Kohli, R.

1997-05-01

The end of the Cold War has brought about tremendous changes in the nuclear complex of the Department of Energy. One of the many changes has been the shutdown or decommissioning of many facilities that performed nuclear work. One of the steps in the process of decommissioning a facility involves the decontamination or removal of drain lines or pipes that may have carried radioactive materials at one time. The removal of all these pipes and drain lines to a nuclear disposal facility could be quite costly. It was suggested by Pacific Northwest National Laboratory (PNNL) that a germanium spectrometer could be built that could fit through straight pipes with a diameter as small as 5.08 cm (2 inches) and pass through curved pipes with a diameter as small as 7.6 cm (3 inches) such as that of a 3-inch p-trap in a drain line. The germanium spectrometer could then be used to simultaneously determine all gamma-ray emitting radionuclides in or surrounding the pipe. By showing the absence of any gamma-ray emitting radionuclides, the pipes could then be reused in place or disposed of as non-radioactive material, thus saving significantly in disposal costs. A germanium spectrometer system has been designed by PNNL and fabricated by Princeton Gamma Tech (PGT) that consists of three segments, each 4.84 cm in diameter and about 10 cm in length. Flexible stainless steel bellows were used to connect the segments. Segment 1 is a small liquid nitrogen reservoir. The reservoir is filled with a sponge-like material which enables the detector to be used in any orientation. A Stirling cycle refrigerator is under development which can replace the liquid nitrogen reservoir to provide continuous cooling and operation

Smaller Anterior Cruciate Ligament Diameter Is a Predictor of Subjects Prone to Ligament Injuries: An Ultrasound Study

Directory of Open Access Journals (Sweden)

Parag Suresh Mahajan

2015-01-01

Full Text Available Purpose. To test if diameter of normal anterior cruciate ligament (ACL can be measured by ultrasound (US, to see if there is a relationship between smaller ACL diameter and ACL injury, and to assess agreement between radiologists in measuring ACL diameter in cases and matched controls. Materials and Methods. In this ethics committee-approved study, maximum diameter of ACL near tibial insertion site was measured by static and dynamic US study in 25 normal contralateral knees of subjects who suffered noncontact ACL injury and in 25 matched control subjects. Results. ACL was visualized as a thick linear hypoechoic band inserted approximately 11 mm caudal to the tibial plateau and the intercondylar eminence. Maximum diameter of contralateral ACL near tibial insertion site among injured subjects was significantly smaller than in noninjured subjects (0.62 ± 0.07 cm versus 0.81 ± 0.06 cm; P<0.0001. In the regression analysis, the diameter of ACL near tibial insertion site was found significantly proportional to body weight and not significantly associated to height, gender, and age. Conclusion. Diameter of normal ACL near tibial insertion site can be measured by US and the maximum diameter is significantly smaller among subjects with noncontact ACL injury. US is a promising modality that can be used as an excellent screening test to detect subjects especially aspiring athletes prone to ACL injury. Very strong agreement was observed between radiologists in measuring ACL diameter.

Foraging behavior of pileated woodpeckers in partial cut and uncut bottomland hardwood forest

Science.gov (United States)

Newell, P.; King, Sammy L.; Kaller, Michael D.

2009-01-01

In bottomland hardwood forests, partial cutting techniques are increasingly advocated and used to create habitat for priority wildlife like Louisiana black bear (Ursus americanus luteolus), white-tailed deer (Odocoileus virginianus), and Neotropical migrants. Although partial cutting may be beneficial to some species, those that use dead wood may be negatively affected since large diameter and poor quality trees (deformed, moribund, or dead) are rare, but normally targeted for removal. On the other hand, partial cutting can create dead wood if logging slash is left on-site. We studied foraging behavior of pileated woodpeckers (Dryocopus pileatus) in one- and two-year-old partial cuts designed to benefit priority species and in uncut forest during winter, spring, and summer of 2006 and 2007 in Louisiana. Males and females did not differ in their use of tree species, dbh class, decay class, foraging height, use of foraging tactics or substrate types; however, males foraged on larger substrates than females. In both partial cut and uncut forest, standing live trees were most frequently used (83% compared to 14% for standing dead trees and 3% for coarse woody debris); however, dead trees were selected (i.e. used out of proportion to availability). Overcup oak (Quercus lyrata) and bitter pecan (Carya aquatica) were also selected and sugarberry (Celtis laevigata) avoided. Pileated woodpeckers selected trees >= 50 cm dbh and avoided trees in smaller dbh classes (10-20 cm). Density of selected foraging substrates was the same in partial cut and uncut forest. Of the foraging substrates, woodpeckers spent 54% of foraging time on live branches and boles, 37% on dead branches and boles, and 9% on vines. Of the foraging tactics, the highest proportion of foraging time was spent excavating (58%), followed by pecking (14%), gleaning (14%), scaling (7%), berry-eating (4%), and probing (3%). Woodpecker use of foraging tactics and substrates, and foraging height and substrate

Douglas-Fir Tussock Moth- and Douglas-Fir Beetle-Caused Mortality in a Ponderosa Pine/Douglas-Fir Forest in the Colorado Front Range, USA

Directory of Open Access Journals (Sweden)

José F. Negrón

2014-12-01

Full Text Available An outbreak of the Douglas-fir tussock moth, Orgyia pseudotsugata McDunnough, occurred in the South Platte River drainage on the Pike-San Isabel National Forest in the Colorado Front Range attacking Douglas-fir, Pseudotsuga menziesii (Mirb. Franco. Stocking levels, species composition, and tree size in heavily and lightly defoliated stands were similar. Douglas-fir tussock moth defoliation resulted in significant Douglas-fir mortality in the heavily defoliated stands, leading to a change in dominance to ponderosa pine, Pinus ponderosa Lawson. Douglas-fir beetle, Dendroctonus pseudotsuqae Hopkins, populations increased following the defoliation event but caused less mortality, and did not differ between heavily and lightly defoliated stands. Douglas-fir tussock moth-related mortality was greatest in trees less than 15 cm dbh (diameter at 1.4 m above the ground that grew in suppressed and intermediate canopy positions. Douglas-fir beetle-related mortality was greatest in trees larger than 15 cm dbh that grew in the dominant and co-dominant crown positions. Although both insects utilize Douglas-fir as its primary host, stand response to infestation is different. The extensive outbreak of the Douglas-fir tussock moth followed by Douglas-fir beetle activity may be associated with a legacy of increased host type growing in overstocked conditions as a result of fire exclusion.

Evaluation of Relationships between Growth Rate, Tree Size, Lignocellulose Composition, and Enzymatic Saccharification in Interspecific Corymbia Hybrids and Parental Taxa.

Science.gov (United States)

Healey, Adam L; Lee, David J; Lupoi, Jason S; Papa, Gabriella; Guenther, Joel M; Corno, Luca; Adani, Fabrizio; Singh, Seema; Simmons, Blake A; Henry, Robert J

2016-01-01

In order for a lignocellulosic bioenergy feedstock to be considered sustainable, it must possess a high rate of growth to supply biomass for conversion. Despite the desirability of a fast growth rate for industrial application, it is unclear what effect growth rate has on biomass composition or saccharification. We characterized Klason lignin, glucan, and xylan content with response to growth in Corymbia interspecific F1 hybrid families (HF) and parental species Corymbia torelliana and C. citriodora subspecies variegata and measured the effects on enzymatic hydrolysis from hydrothermally pretreated biomass. Analysis of biomass composition within Corymbia populations found similar amounts of Klason lignin content (19.7-21.3%) among parental and hybrid populations, whereas glucan content was clearly distinguished within C. citriodora subspecies variegata (52%) and HF148 (60%) as compared to other populations (28-38%). Multiple linear regression indicates that biomass composition is significantly impacted by tree size measured at the same age, with Klason lignin content increasing with diameter breast height (DBH) (+0.12% per cm DBH increase), and glucan and xylan typically decreasing per DBH cm increase (-0.7 and -0.3%, respectively). Polysaccharide content within C. citriodora subspecies variegata and HF-148 were not significantly affected by tree size. High-throughput enzymatic saccharification of hydrothermally pretreated biomass found significant differences among Corymbia populations for total glucose production from biomass, with parental Corymbia torelliana and hybrids HF-148 and HF-51 generating the highest amounts of glucose (~180 mg/g biomass, respectively), with HF-51 undergoing the most efficient glucan-to-glucose conversion (74%). Based on growth rate, biomass composition, and further optimization of enzymatic saccharification yield, high production Corymbia hybrid trees are potentially suitable for fast-rotation bioenergy or biomaterial production.

Evaluation of relationships between growth rate, tree size, lignocellulose composition and enzymatic saccharification in interspecific Corymbia hybrids and parental taxa.

Directory of Open Access Journals (Sweden)

Adam L Healey

2016-11-01

Full Text Available In order for a lignocellulosic bioenergy feedstock to be considered sustainable, it must possess a high rate of growth to supply biomass for conversion. Despite the desirability of a fast growth rate for industrial application, it is unclear what effect growth rate has on biomass composition or saccharification. We characterized Klason lignin, glucan, and xylan content with response to growth in Corymbia interspecific F1 hybrid families (HF and parental species C. torelliana (CT and C. citriodora subspecies variegata (CCV and measured the effects on enzymatic hydrolysis from hydrothermally pretreated biomass. Analysis of biomass composition within Corymbia populations found similar amounts of Klason lignin content (19.7-21.3% among parental and hybrid populations, whereas glucan content was clearly distinguished within CCV (52% and HF148 (60% as compared to other populations (28-38%. Multiple linear regression indicates that biomass composition is significantly impacted by tree size measured at the same age, with Klason lignin content increasing with diameter breast height (DBH (+0.12% per cm DBH increase, and glucan and xylan typically decreasing per DBH cm increase (-0.7% and -0.3%, respectively. Polysaccharide content within CCV and HF-148 were not significantly affected by tree size. High-throughput enzymatic saccharification of hydrothermally pretreated biomass found significant differences among Corymbia populations for total glucose production from biomass, with parental CT and hybrids HF-148 and HF-51 generating the highest amounts of glucose (~180 mg/g biomass, respectively, with HF-51 undergoing the most efficient glucan-to-glucose conversion (74%. Based on growth rate, biomass composition, and further optimization of enzymatic saccharification yield, high production Corymbia hybrid trees are potentially suitable for fast-rotation bioenergy or biomaterial production.

Growth decline assessment in Pinus sylvestris L. and Pinus nigra Arnold. forest by using 3-PG model

Energy Technology Data Exchange (ETDEWEB)

Navarro-Cerrillo, R.M.; Beira, J.; Suarez, J.; Xenakis, G.; Sánchez-Salguero, R.; Hernández-Clemente, R.

2016-07-01

Aim of the study: We assessed the ability of the 3-PG process-based model to accurately predict growth of Pinus sylvestris and P. nigra plantations across a range of sites, showing declining growth trends, in southern Spain. Area of study: The study area is located in “Sierra de Los Filabres” (Almería). Material and methods: The model was modified in fifteen parameters to predict diameter (DBH, cm), basal area increment (BAI, cm2 yr-1) and leaf area index (LAI, m2 m-2) in healthy trees and trees showing declining growth. We assumed that a set of specific physiological parameters (stem partitioning ratio-pFS20, maximum litterfall rate-γFx, maximum canopy conductance-gCx, specific leaf area for mature aged stands-σ1, age at which specific leaf area = ½ (σ0 + σ1), age at full canopy cover-tc, and canopy boundary layer conductance-gB) included in 3-PG would be suitable for predicting growth decline related to climate conditions. The calibrated model was evaluated using dendrochronological and LAI data obtained from plots. Main results: Observed and simulated DBH showed a high correlation (R2 > 0.99) between modelled and measured values for both species. In contrast, modelled and observed BAI showed lower correlation (R2 < 0.68). Sensitivity analysis on 3-PG outputs showed that the foliage parameters - maximum litterfall rate, maximum canopy conductance, specific leaf area for mature aged stands, age at which specific leaf area, and age at full canopy cover - were important for DBH and BAI predictions under drought stress. Research highlights: Our overall results indicated that the 3-PG model could predict growth response of pine plantations to climatic stress with desirable accuracy in southern Spain by using readily available soil and climatic data with physiological parameters derived from experiments. (Author)

In vitro protocol for validating interface pressure sensors for therapeutic compression garments: Importance of sphygmomanometer placement and initial cuff diameter

Directory of Open Access Journals (Sweden)

Inhwa Jung

2018-02-01

Full Text Available An optimal protocol is needed to validate the performance of future interface pressure sensors for compression garments when using a sphygmomanometer. PicoPress® was used on a rigid plastic cylinder (r=4 cm. An FDA-cleared aneroid sphygmomanometer was used to apply pressures from 10-60 mmHg with a diameter of 8 cm or 12 cm placed either beneath the sphygmomanometer’s airbag or fabric cuff. A two-tail t-test was performed (P<0.05 for significance for all applied pressures. PicoPress® outputs vary with sensor placement (airbag vs fabric cuff and the initial cuff diameter. Sensor placement overlying the sphygmomanometer’s fabric cuff compared to the airbag led to significantly higher pressures (37%-135% depending on the cuff diameter size. These differences were nearly all statistically significant (P<0.05. Validation of new interface pressure sensors deploying a sphygmomanometer for calibration should specify the location of sensor placement location and initial diameter with a preference for placement under the airbag.

Interpretation of Forest Resources at the Individual Tree Level at Purple Mountain, Nanjing City, China, Using WorldView-2 Imagery by Combining GPS, RS and GIS Technologies

Directory of Open Access Journals (Sweden)

Songqiu Deng

2013-12-01

Full Text Available This study attempted to measure forest resources at the individual tree level using high-resolution images by combining GPS, RS, and Geographic Information System (GIS technologies. The images were acquired by the WorldView-2 satellite with a resolution of 0.5 m in the panchromatic band and 2.0 m in the multispectral bands. Field data of 90 plots were used to verify the interpreted accuracy. The tops of trees in three groups, namely ≥10 cm, ≥15 cm, and ≥20 cm DBH (diameter at breast height, were extracted by the individual tree crown (ITC approach using filters with moving windows of 3 × 3 pixels, 5 × 5 pixels and 7 × 7 pixels, respectively. In the study area, there were 1,203,970 trees of DBH over 10 cm, and the interpreted accuracy was 73.68 ± 15.14% averaged over the 90 plots. The numbers of the trees that were ≥15 cm and ≥20 cm DBH were 727,887 and 548,919, with an average accuracy of 68.74 ± 17.21% and 71.92 ± 18.03%, respectively. The pixel-based classification showed that the classified accuracies of the 16 classes obtained using the eight multispectral bands were higher than those obtained using only the four standard bands. The increments ranged from 0.1% for the water class to 17.0% for Metasequoia glyptostroboides, with an average value of 4.8% for the 16 classes. In addition, to overcome the “mixed pixels” problem, a crown-based supervised classification, which can improve the classified accuracy of both dominant species and smaller classes, was used for generating a thematic map of tree species. The improvements of the crown- to pixel-based classification ranged from −1.6% for the open forest class to 34.3% for Metasequoia glyptostroboides, with an average value of 20.3% for the 10 classes. All tree tops were then annotated with the species attributes from the map, and a tree count of different species indicated that the forest of Purple Mountain is mainly dominated by Quercus acutissima, Liquidambar formosana

Exploration of the optimal diameter cut-off value in patients with nonfunctional adrenal tumor suitable for surgery

Directory of Open Access Journals (Sweden)

Dan-dan LIU

2016-12-01

Full Text Available Objective 　To analyze the pathology of the patients with nonfunctional adrenal tumor (NFA, and explore the optimal diameter cut-off value. Methods 　The clinical data of 243 patients with NFA, evaluated in the Department of Endocrinology and operated in the Department of Urology of General Hospital of Chinese PLA from Feb. 1996 to Jan. 2016, were collected. The patients were divided into two groups according to pathology: those in real demand of surgery were classified to the surgery-need group (n=57, while the others were categorized as the surgery-unwanted group (n=186. The general situation, pathological type and tumor diameter of the two groups and the factors affecting the surgery were analyzed, and the ROC curve was used to explore the optimal surgery cut-off value, which represents the maximum value of the sum of sensitivity and specificity. Results 　Of the 57 patients in surgery-need group (27 males and 30 females, the lesions were on the right in 31 cases, on the left in 25 cases, and on bilateral sides in 1 case; the median of lesion diameter was 4.5cm, and the average age was 41.5±12.1 years old. Of the 186 patients in surgery-unwanted group (87 males and 99 females, the lesions were on the right in 99 cases, on the left in 86 cases, and on bilateral sides in 1 case; the median of lesion diameter was 3.0cm, and the average age was 50.6±10.9 years old. Logistic regression revealed that lesion diameter might be a risk factor (OR=1.340, 95%CI 1.266-1.418, P=0.000 and age be a protective factor (OR=0.942, 95%CI 0.929-0.955, P=0.000 for real demand of surgery. The area under the ROC curve (AUC of lesion diameter was 0.757(95%CI 0.681-0.833. The optimal cut-off value was 4.1cm (sensitivity 60.7% and specificity 83.0%. Conclusions 　Younger patients with bigger lesion diameter may have greater possibility for surgery. The optimal surgery cut-off value of the lesion diameter is 4.1cm. DOI: 10.11855/j.issn.0577-7402.2016.11.11

Efeitos de área e de borda sobre a estrutura florestal em fragmentos de floresta de terra-firme após 13-17 anos de isolamento Area and edge effects on forest structure in Amazonian forest fragments after 13-17 years of isolation

Directory of Open Access Journals (Sweden)

Henrique E. M. Nascimento

2006-01-01

Full Text Available As estimativas de densidade e biomassa de árvores vivas com DAP > 10 cm e arvoretas 1-9,9 cm de DAP, liteira lenhosa grossa caída (LCG diâmetro > 10 cm, árvores mortas em pé (> 10 de DAP e liteira lenhosa fina caída (LCF - 2,5 9,9 cm de diâmetro foram quantificadas em 56 parcelas permanentes de 1 ha, distribuídas em quatro categorias de tamanho de fragmento - fragmentos de 1 ha (4 parcelas, fragmentos de 10 ha (12 parcelas e fragmentos de 100 ha (14 parcelas e floresta contínua (19 parcelas e em duas classes de distância da borda - 300 m (21 parcelas. A densidade e a biomassa de árvores e arvoretas de espécies de estágios sucessionais mais avançados não diferiram significativamente entre as diferentes categorias de tamanho e entre as duas distâncias da borda. Por outro lado, fragmentos florestais e locais 300 m da borda, respectivamente. Fragmentos florestais apresentaram maior quantidade de LCG e LCF do que a floresta contínua. Houve também diferenças significativas entre ambas as distâncias da borda para a quantidade de LCG e LCF e necromassa total. Uma análise de covariância mostrou que não houve efeito de tamanho do fragmento, mas a distância da borda teve um efeito significativo sobre a quantidade de LCG e LCF. A quantidade de LCG e LCF foi correlacionada negativamente com a distância da borda - locais mais próximos à borda tiveram cerca de 40% e 60% mais LCG do que locais mais distantes.Density and biomass of live trees >10 cm DBH and saplings 1-9.9 cm DBH, coarse woody debris (LCG diameter > 10 cm, fine woody debris (LCF diameter 2.5-9.9 cm, and standing dead trees (> 10 cm DBH were quantified in 56 permanent, 1-ha sample plots. These plots are located in four 1- (4 plots, three 10- (12 plots and two 100- (14 plots forest fragments in size and nearby continuous forests (19 plots as well as in two classes of distance from the edges - 300 m (21 plots. Density and biomass of primary species did not differ

Uniform laser ablative acceleration of targets at 1014 W/cm2

International Nuclear Information System (INIS)

Obenschain, S.P.; Whitlock, R.R.; McLean, E.A.; Ripin, B.H.; Price, R.H.; Phillion, D.W.; Campbell, E.M.; Rosen, M.D.

1982-01-01

We present the first detailed investigations of the ablative acceleration of planar targets while simultaneously using high irradiance (10 14 W/cm 2 ), large focal diameters (1 mm) and long laser pulse duration (3 nsec). Included are measurements of target preheat, ablation pressures and uniformity achieved under these conditions. Targets were accelerated to high velocities with velocity profile uniformity approaching that required for high gain pellet implosions

EFFECTS OF PLANTING SPACE AND HARVEST TIME ON THE NUMBER, WEIGHT AND DIAMETER OF MARIGOLD (CALENDULA OFFICINALIS L. FLOWERS

Directory of Open Access Journals (Sweden)

Nada Parađiković

2013-06-01

Full Text Available The study was conducted during 2010 in marigold (Calendula officinalis L. to determine the effects of three plant densities (plant density A - 65 cm x 35 cm; plant density B - 65 cm x 25 cm; plant density C – 55 cm x 25 cm and harvest time on the number, weight and diameter of marigold flowers. The results showed that the plant density significantly influenced the number of flowers per plant and flower weight. The largest number of flowers per plant was recorded in the plant density B (13.2 and the lowest (9.87 in the plant density C. The lowest flower weight was recorded in the plant density C (1.31 g and was statistically lower than the flower weight in the plant densities A (1.42 g and B (1.38 g. The plant density significantly influenced the number of flowers on side branches, being the highest in the plant density B. The diameter of the marigold flower was not significantly influenced by the plant density. During the experiment, a total of 13 harvests were achieved. The greatest number of flowers per plant was harvested in the eighth, ninth and tenth harvest, while the largest flower weight was measured in the fifth and twelfth harvest. On the average, the number of flowers per plant / harvest was 11.63 and the weight of flowers was 1.38 g. Diameter of marigold flowers ranged from 2.89 cm to 3.59 cm in the thirteenth and the third harvest, respectively. The number of flowers on side branches per plant / harvest was 11.61.

Bearing capacity of helical pile foundation in peat soil from different, diameter and spacing of helical plates

Science.gov (United States)

Fatnanta, F.; Satibi, S.; Muhardi

2018-03-01

In an area dominated by thick peat soil layers, driven piles foundation is often used. These piles are generally skin friction piles where the pile tips do not reach hard stratum. Since the bearing capacity of the piles rely on the resistance of their smooth skin, the bearing capacity of the piles are generally low. One way to increase the bearing capacity of the piles is by installing helical plates around the pile tips. Many research has been performed on helical pile foundation. However, literature on the use of helical pile foundation on peat soil is still hardly found. This research focus on the study of axial bearing capacity of helical pile foundation in peat soil, especially in Riau Province. These full-scale tests on helical pile foundation were performed in a rectangular box partially embedded into the ground. The box is filled with peat soil, which was taken from Rimbo Panjang area in the district of Kampar, Riau Province. Several helical piles with different number, diameter and spacing of the helical plates have been tested and analysed. The tests result show that helical pile with three helical plates of uniform diameter has better bearing capacity compared to other helical piles with varying diameter and different number of helical plates. The bearing capacity of helical pile foundation is affected by the spacing between helical plates. It is found that the effective helical plates spacing for helical pile foundation with diameter of 15cm to 35cm is between 20cm to 30cm. This behaviour may be considered to apply to other type of helical pile foundations in peat soil.

Composição florística e fitossociologia de espécies arbóreas do Parque Fenológico da Embrapa Amazônia Ocidental Floristic composition and phytosociology of tree species in the Phenological Site of the Embrapa Western Amazonia

Directory of Open Access Journals (Sweden)

Kátia Emídio da Silva

2008-01-01

Full Text Available Este trabalho objetiva avaliar a composição florística e a fitossociologia de espécies arbóreas do parque fenológico da Embrapa Amazônia Ocidental no Distrito Agropecuário da Suframa (DAS, Manaus-AM, a fim de subsidiar seleções futuras de árvores matrizes visando estudos fenológicos e a implantação de áreas de coleta de sementes. Foram alocadas aleatoriamente 20 parcelas de 10m x 50 m ao longo de um transecto, amostrando-se todos os indivíduos com diâmetro a 1,30 m do solo, (DAP ≥ 20,0 cm. Foram registrados 240 indivíduos, distribuídos em 100 espécies, 70 gêneros e 29 famílias. As famílias de maior importância ecológica são, em ordem decrescente, Lecythidaceae, Sapotaceae, Mimosaceae, Caesalpiniaceae, Chrysobalanaceae, Fabaceae, Humiriaceae, Moraceae, Vochysiaceae e Apocynaceae. Essas famílias contribuem com 67% da riqueza local de espécies e com 75,8% do número de indivíduos, sugerindo que a diversidade vegetal da área está concentrada em poucas famílias. A família Lecythidaceae possui os maiores valores de dap e número de indivíduos, sendo Sapotaceae a que possui a maior riqueza de espécies na área. As espécies mais importantes, segundo o Índice de Valor de Importância-IVI, são Eschweilera coriacea (DC S.A. Mori; Qualea paraensis Ducke; Vantanea macrocarpa Ducke; Eschweilera atropetiolataThis research was carried out to study the floristic composition and phytosociology of tree species in the phenological site of Embrapa Western Amazonia, Suframa Agropecuary District-SAD, Manaus-AM, aiming to help future selection of seed trees, for the establishment of seed collecting areas. Twenty plots of 10m x 50m were studied, along a topographic sequence, where trees with a diameter at breast height (dbh ≥ 20,0cm were inventoried. A total of 240 trees belonging to 29 families, in 70 genera with 100 species were identified. The most important families, in a decreasing order, were: Lecythidaceae, Sapotaceae

Comparison of Different Height–Diameter Modelling Techniques for Prediction of Site Productivity in Natural Uneven-Aged Pure Stands

Directory of Open Access Journals (Sweden)

Guangshuang Duan

2018-01-01

Full Text Available Reliable estimates of forest site productivity are a central element of forest management. The model of height-diameter relationship of dominant trees using algebraic difference approach (ADA is a commonly used method to measure site productivity of natural uneven-aged stands. However, the existing models of this method do not recognize site type or sample plot specific variability in height curves; thus, it cannot be effectively used to estimate site type or sample plot-related site productivity for natural uneven-aged stands. Two primary subject-specific approaches, ADA with dummy variable (DV (ADA + DV and ADA with combination of dummy variable and nonlinear mixed-effects modelling (CM (ADA + CM, were proposed for height–diameter modelling. Height–diameter models developed with ADA, ADA + DV and ADA + CM were compared using data from 4161 observations on 349 permanent sample plots of four major natural uneven-aged pure stands (Spruce, Korean Larch, Mongolian Oak, and White Birch in northeastern China. It was found that models developed with ADA + CM provided the best performance, followed by the models with ADA + DV, and the models developed with ADA performed the worst. Random effects at the plot level were substantial, and their inclusion greatly improved the model’s accuracy. More importantly, the models developed with ADA + CM provide an effective method for quantifying site type- and sample plot-specific forest site productivity for uneven-aged pure stands.

Influencias de la densidad y podas sobre la producción de Pinus taeda l. a los 7 años de edad

Directory of Open Access Journals (Sweden)

Rubén Costas

2005-01-01

Full Text Available In an experiment with 3 stand densities and 12 prune treatments there were analyzed the effects of stand density, prune and interaction between them on the yield of a Pinus taeda L. plantation. The stand variables analyzed were diameter at breast height (DBH, stem volume, volume per hectare, height, basal area, diameter over stubs (DMSM, Girard form coefficient (CFG, diameter of branch (DRBC and branche’s angle (ARBC at crown base. In the treatments with high density there were observed higher volume per hectare, basal area, CFG and lower DBH, stem volume, DMSM, DRBC and ARBC. In the treatments with lower prune height there were observed higher DBH, stem volume, volume per hectare, basal area than the treatments with larger prune height. Lower DMSM was observed with final prune height of 3,30 m and 4,40 m made at the age of 4 year. Higher DMSM were observed with final prune height of 5,5 and 6,6 m made at the age of 5 year. No statiscaly significant effects were found of the prune treatments over DRBC, ARBC and CFG or interaction between stand density and prune height. The density and prune yield effects were independent from each other.

Dwarf mistletoe does not increase trunk taper in released red firs in California

Science.gov (United States)

Robert F. Scharpf

1977-01-01

Dwarf mistletoe had no noticeable effect on trunk taper of young, dominant and codominant red firs 4 to 22 inches (10.2 to 55.9 cm) d.b.h. Also, taper was not influenced by live crown ratio of infected and uninfected trees. Trees less than 7 inches d.b.h. had significantly more taper than larger trees, irrespective of dwarf mistletoe.

Controlling liquid pool depth in VAR of a 21.6 cm diameter ingot of Alloy 718

Science.gov (United States)

Lopez, Felipe; Beaman, Joseph; Williamson, Rodney; Taleff, Eric; Watt, Trevor

It is believed that the final microstructure in vacuum arc remelted (VAR) ingots is strongly influenced by the molten metal pool profile. Thus, if the pool profile was properly controlled during the melt then defect-free microstructures would be obtained. The recent development of a reduced-order model of VAR solidification allowed the design of a pool depth controller to accomplish this task. The controller used a linear quadratic regulator and a Kalman filter to stabilize the melt pool solidification front under the effect of uncertain process dynamics and noisy measurements. Basic Axisymmetric Remelting (BAR), a high-fidelity VAR ingot model, was used in real time to provide pool depth measurements that were incorporated in the control loop. The controller was tested at Los Alamos National Laboratory in a 21.6 diameter Alloy 718 ingot. Details of the controller design will be presented, along with comparisons to experimentally-measured pool depths.

Treefall gap disturbance in an old-growth beech forest in southwestern Japan by a catastrophic typhoon

International Nuclear Information System (INIS)

Ida, Hideyuki

2000-01-01

In 1991, the catastrophic Typhoon 9119 created many treefall gaps in an old-growth beech (Fagus crenata) forest on Mt. Garyu, southwestern Japan. In a 3.3-ha plot, the density and basal area of fatally damaged trunks (DBH ≥ 20 cm) were 29.1 trunks/ha (16.9% of all pre-typhoon trunks) and 9.1 m 2 /ha. (24.4% of total pre-typhoon basal area), respectively. Many of the dominant beech were lost and larger trunks were damaged. The pre- and post-typhoon DBH distribution both had an inverse J-shape. Spatial distribution of living trunks was not random but clustered irrespective of typhoon damage or DBH size, suggesting that the stand structure of the study plot would be an unusual one as compared with the previous study stands in Japanese beech forests. The death of pre-typhoon trunks, seemed to die standing or to be killed by snap-off, occurred singly; however, the typhoon fatally damaged many clustered trunks at the same time. Uprooting was the most frequent cause of gaps created by the typhoon. The intermediate DBH size class (40 - 70 cm) would be more likely to be uprooted than snapped-off. The DBH distribution of snap-off may reflect the total pre-typhoon trunk distribution. Branch-fall had a flat DBH distribution. Uprooting might have a clustered distribution, while snap-off and branch-fall both had random distributions. The smaller trunks of snap-off and branch-fall seemed to result from injuries caused by the fall of larger trunks

Quantitative analysis of savanna wood species, in Teixeira, state of Paraiba, Brazil

Directory of Open Access Journals (Sweden)

José Adelmo Nunes Leite

2015-06-01

Full Text Available Savanna is the vegetation of semi-arid northeastern region of Brazil, which is largely determined by climate and topography. The municipality of Teixeira in the state of Paraiba presents hyperxerophilous shrub-arboreal caatinga land cover, which differs in size and density from those found in Sertaneja Depression, due to higher humidity. The objective of this work was to quantify forest remnant in the municipality of Teixeira, using geographic information system and forest inventory techniques. Native vegetation was mapped using satellite images, from November, 2008. Forest inventory was carried out in 40 sample plots (20 m × 20 m that were selected systematically. Height and diameter at 1.30 m from soil level (DBH were measured in every tree with DBH ≥ 10 cm. Each tree was identified by common and scientific names. A total of 4,911 trees were sampled, representing 46 species and 24 families that corresponds to 3,069 trees ha-1. The species with highest importance value (IV were: Croton sonderianus, Mimosa tenuiflora and Piptadenia stipulacea and the more important families were Euphorbiaceae, Mimosaceae and Caesalpinaceae. The municipality of Teixeira has its best preserved areas in mountainous regions with difficult access.

Predicting spatial variations of tree species richness in tropical forests from high-resolution remote sensing.

Science.gov (United States)

Fricker, Geoffrey A; Wolf, Jeffrey A; Saatchi, Sassan S; Gillespie, Thomas W

2015-10-01

There is an increasing interest in identifying theories, empirical data sets, and remote-sensing metrics that can quantify tropical forest alpha diversity at a landscape scale. Quantifying patterns of tree species richness in the field is time consuming, especially in regions with over 100 tree species/ha. We examine species richness in a 50-ha plot in Barro Colorado Island in Panama and test if biophysical measurements of canopy reflectance from high-resolution satellite imagery and detailed vertical forest structure and topography from light detection and ranging (lidar) are associated with species richness across four tree size classes (>1, 1-10, >10, and >20 cm dbh) and three spatial scales (1, 0.25, and 0.04 ha). We use the 2010 tree inventory, including 204,757 individuals belonging to 301 species of freestanding woody plants or 166 ± 1.5 species/ha (mean ± SE), to compare with remote-sensing data. All remote-sensing metrics became less correlated with species richness as spatial resolution decreased from 1.0 ha to 0.04 ha and tree size increased from 1 cm to 20 cm dbh. When all stems with dbh > 1 cm in 1-ha plots were compared to remote-sensing metrics, standard deviation in canopy reflectance explained 13% of the variance in species richness. The standard deviations of canopy height and the topographic wetness index (TWI) derived from lidar were the best metrics to explain the spatial variance in species richness (15% and 24%, respectively). Using multiple regression models, we made predictions of species richness across Barro Colorado Island (BCI) at the 1-ha spatial scale for different tree size classes. We predicted variation in tree species richness among all plants (adjusted r² = 0.35) and trees with dbh > 10 cm (adjusted r² = 0.25). However, the best model results were for understory trees and shrubs (dbh 1-10 cm) (adjusted r² = 0.52) that comprise the majority of species richness in tropical forests. Our results indicate that high

Cost of Czochralski wafers as a function of diameter

Science.gov (United States)

Leipold, M. H.; Radics, C.; Kachare, A.

1980-02-01

The impact of diameter in the range of 10 to 15 cm on the cost of wafers sliced from Czochralski ingots was analyzed. Increasing silicon waste and decreasing ingot cost with increasing ingot size were estimated along with projected costs. Results indicate a small but continuous decrease in sheet cost with increasing ingot size in this size range. Sheet costs including silicon are projected to be $50 to $60/sq m (1980 $) depending upon technique used.

Extraction of Trees Stem Diameters at Breast Height by Terrestrial Laser Sensor for Selective Cutting

Directory of Open Access Journals (Sweden)

Yili ZHENG

2014-02-01

Full Text Available In order to assist the operators of the logging harvester automatically and quickly select the appropriate trees for selective cutting, using two-dimensional laser scanner and inertial measurement system, the two-dimensional cloud points of the trunks at breast-height are obtained for several trees. After projection, clustering, linear transformation and fitting for the point clouds data, the parameters of the breast-height-diameters and center locations of the trees are obtained. The calculation is implemented in MATLAB by Polak-Ribiere-Polyak (PRP conjugate gradient algorithm and the result is shown in VC++ environment. Using this method, absolute errors of the breast-height- diameters and center locations are 2.3 cm and (12.4, 11.4 cm respectively, and meet the requirements on the automatically selective cutting of the logging harvester.

Generation of longitudinally polarized terahertz pulses with field amplitudes exceeding 2 kV/cm

Science.gov (United States)

Cliffe, M. J.; Rodak, A.; Graham, D. M.; Jamison, S. P.

2014-11-01

We demonstrate the generation of near-single cycle longitudinally polarized terahertz radiation using a large-area radially biased photoconductive antenna with a longitudinal field amplitude in excess of 2 kV/cm. The 76 mm diameter antenna was photo-excited by a 0.5 mJ amplified near-infrared femtosecond laser system and biased with a voltage of up to 100 kV applied over concentric electrodes. Amplitudes for both the transverse and longitudinal field components of the source were measured using a calibrated electro-optic detection scheme. By tightly focusing the radiation emitted from the photoconductive antenna, we obtained a maximum longitudinal field amplitude of 2.22 kV/cm with an applied bias field of 38.5 kV/cm.

Woodland: dynamics of average diameters of coniferous tree stands of the principal forest types

Directory of Open Access Journals (Sweden)

R. A. Ziganshin

2016-08-01

Full Text Available The analysis of age dynamics of average diameters of deciduous tree stands of different forest types at Highland Khamar-Daban (natural woodland in South-East Baikal Lake region has been done. The aggregate data of average tree, the analysis of age dynamics of average diameters of a deciduous tree stands of stand diameters by age classes, as well as tree stand current periodic and overall average increment are presented and discussed in the paper. Forest management appraisal is done. The most representative forest types have been selected to be analyzed. There were nine of them including three Siberian stone pine Pinus sibirica Du Tour stands, three Siberian fir Abies sibirica Ledeb. stands, one Siberian spruce Picea obovata Ledeb. stand, and two dwarf Siberian pine Pinus pumila (Pallas Regel stands. The whole high-altitude range of mountain taiga has been evaluated. Mathematical and statistic indicators have been calculated for every forest type. Stone pine stands are the largest. Dynamics of mean diameters of forest stands have been examined by dominant species for every forest type. Quite a number of interesting facts have been elicited. Generally, all species have maximal values of periodic annual increment that is typical for young stands, but further decrease of increment is going on differently and connects to the different lifetime of wood species. It is curious that annual increment of the dwarf Siberian pine stands almost does not decrease with aging. As for mean annual increment, it is more stable than periodic annual increment. From the fifth age class (age of stand approaching maturity mean annual increment of cedar stands varies from 0.20 to 0.24 cm per year; from 0.12–0.15 to 0.18–0.21 cm per year – in fir stands; from 0.18 to 0.24 cm per year – in spruce stands; and from 0.02–0.03 to 0.05–0.06 cm per year – in draft pine stands. Mean annual increment of dwarf Siberian pine increases with aging and increment of other

Tree Inventory and Biometry Measurements, Tapajos National Forest, Para, Brazil, 2010

Data.gov (United States)

National Aeronautics and Space Administration — This dataset provides tree inventory, tree height, diameter at breast height (DBH), and estimated crown measurements from 30 plots located in the Tapajos National...

Estructura, riqueza y composición de plantas leñosas en el golfo de Tribugá, Chocó, Colombia

Directory of Open Access Journals (Sweden)

Galicano Gloria

2001-07-01

Full Text Available Se estudió la estructura, riqueza y composición florística del componente leñoso de los bosques del Golfo de Tribugá, Costa Pacífica del Chocó, Colombia, con base en el muestreo de los individuos con DAP?: 5 cm en dos transectos de 0.4 ha cada uno y en la información previamente publicada para una ha en la misma zona. Los bosques son estructuralmente homogéneos y están caracterizados por la abundancia de palmas arborescentes, la escasez de lianas y la alta frecuencia de raíces zancos. Comparados con otros bosques de la región del Chocó biogeográfico con precipitación similar, los bosques del Golfo de Tribugá son más pobres en especies de plantas leñosas (en promedio 29 especies > 10 cm DAP en 0.1 ha, tienen menos individuos (en promedio 48 individuos z 10 cm DAP en 0.1 ha, árboles más gruesos (en promedio 9.8% de los individuos> 40 cm DAP en 0.1 ha y un área basal mayor (en promedio 3.16 m? por 0.1 ha incluyendo individuos > 10 cm DAP. Estas diferencias parecen ser consistentes con la existencia de una correlación negativa entre la fertilidad del suelo y, la densidad y la riqueza de árboles. A pesar de que la abundancia de especies y familias fue igual en todos los sitios, la similitud en composición florística fue muy baja. Sólo hubo 10 especies > 10 cm DAP comunes a los tres sitios. La importancia ecológica de las Moráceas parece estar entre las más altas registradas en el Neotrópico (VIF=48.2-53.9 para los individuos> 10 cm DAP. La estructura y los valores de riqueza de plantas leñosas de los bosques del Golfo de Tribugá se acercan más a los bosques de La Selva, Costa Rica, que a otros bosques igualmente lluviosos del Chocó biogeográfico.Structure, richness and floristic composition of the woody elements ofthe forests of the Golfo de Tribugá, Pacific Coast of Chocó, Colombia, were studied in two 0.4 ha plots sampled for all individuals ?: 5 cm dbh and using also previously published information for one l

Ultrasonographic findings of papillary carcinoma of the thyroid according to the size: Especially less than 0.5 cm

Energy Technology Data Exchange (ETDEWEB)

Park, So Yung; Kim, Yun Min; Lee, Hyun Bok; Cho, Nam Soo [Dept. of Diagonostic Radiology, Samsung Medical Center, Seoul (Korea, Republic of); Yoon, Joon [Dept. of Radiologic Technology, Dongnam Health College, (Korea, Republic of)

2013-06-15

The Korean Thyroid Association recommends fine-needle aspiration biopsy (FNAB) for nodules more than 0.5 cm in diameter. But nodules, smaller than 0.5 cm have been found in papillary carcinomas of the thyroid (PTC) at the health promotion center at SMC. We wanted to evaluate the ultrasonographic findings according to size of nodule in proven PTCs by FNAB, especially less than 0.5 cm. All nodules were classified into three groups by their longest diameter : less than 0.5 cm, more than 0.5 cm but less than 1 cm, and more than 1 cm. Sonographic findings suggesting malignancy were analyzed according to their size groups. Of 288 malignant nodules, 21.5 % (62/288) were less than 0.5 cm , 54.9 % (158/288) were more than 0.5 cm but less than 1 cm, 23.6 % (68/288) exceeded 1 cm. A taller-than-wide shape was observed in 90.3 % (56/62) of nodules less than 0.5 cm, and 48.5 % (33/68) of nodules exceeding 1 cm (p<0.001). There were no well-defined smooth nodules among nodules less than 0.5 cm, and spiculated or irregular margin nodules increased as the size increased (p=0.024). Nodules of size less than 0.5 cm did not showed hyper or isoechogenicity. Hypoechogenicity was greater than the marked hypoechogenicity in each group (p=0.034). Micro- or macro-calcifications were not founded in 77.4 % (48/62) of the nodule group sized less than 0.5 cm. From the small size of the group, micro- or macrocalcifications were observed 21.0 % (13/62), 48.1 % (76/158), 64.7 % (44/68), so the number of nodules containing micro- or macro-calcification increased as size increased (p<0.001). PTCs less than 0.5 cm in size on ultrasonography had taller than-wide shape, spiculated or irregular and ill-defined margins, and exhibited hypo and markedly hypoechogenicity, but microor macro-calcifications were not common. These ultrasonographic features of nodules less than 0.5 cm can be useful in reporting and guiding FNABs or follow-up exams.

Impact of operational factors on fossil energy inputs in motor-manual tree felling and processing: results of two case studies

Directory of Open Access Journals (Sweden)

Gheorghe Ignea

2017-07-01

Full Text Available In many cases tree felling and processing operations are carried out motor-manually and knowledge about fossil fuel consumption and direct energy inputs when using such equipment is required for different purposes starting with operational costing and ending with environmental assessment of forest operations. In this study, fuel mixture, chain oil and direct fossil energy inputs were evaluated for two chainsaws which were used to fell and process trees in two silvicultural systems. The results of this study suggest that there is a strong dependence relation between selected tree size variables such as the diameter at breast height and tree volume on one hand and the fuel mixture, chain oil and direct fossil energy inputs when felling and processing broadleaved hardwood and resinous softwood trees on the other hand. For the broadleaved trees (mean tree volume of 1.50 m3 × tree-1, DBH of 45.5 cm and tree height of 21.84 m the mean direct fossil energy input was of 3.86 MJ m-3 while for resinous trees (mean tree volume of 1.77 m3 tree-1, DBH of 39.28 cm and tree height of 32.49 m it was of 3.93 MJ m-3. Other variables, including but not limited to the technology used, work experience and procedural pattern, may influence the mentioned figures and extensive studies are required to clarify their effects.

Evaluation of different selection indices combining Pilodyn penetration and growth performance in Eucalyptus clones

Directory of Open Access Journals (Sweden)

Andrei Caíque Pires Nunes

2017-06-01

Full Text Available The present study aimed to evaluate the selection indices efficiency for Pilodyn penetration combined with growth traits in Eucalyptus clones. It was carried out experiments in a randomized block design, with single tree plots and 30 replications. Diameter at breast height (DBH, total height (TH, and Pilodyn penetration as an indicator of basic density (BD were measured. The volume was estimated. Based on predicted genotypic values, three indices presented the highest accuracies: I8 (based on partial correlation, I7 (based on the concept of multivariate BLUP and I3 (based on two variables as ratio, which uses a third heritability estimate associated to the ratio DBH/BD, besides the two heritabilities of DBH and BD. Thus, it is possible to optimize the selection by combining properly the variables using their genetic control, precision and the relationships between them. The best options came from using only two no redundant traits DBH and BD.

Compact modular BWR (CM-BWR)

International Nuclear Information System (INIS)

Fennern, Larry; Boardman, Charles; Carroll, Douglas G.; Hida, Takahiko

2003-01-01

A preliminary assessment has shown that a small 350 MWe BWR reactor can be placed within a close fitting steel containment vessel that is 7.1 meters inside diameter. This allows the technology and manufacturing capability currently used to fabricate large ABWR reactor vessels to be used to provide a factory fabricated containment vessel for a 350 MWe BWR. When a close fitted steel containment is combined with a passive closed loop isolation condenser system and a natural circulating reactor system that contains a large water inventory, primary system leaks cannot uncover the core. This eliminates many of the safety systems needed in response to a LOCA that are common to large, conventional plant designs including. Emergency Core Flooding, Automatic Depressurization System, Active Residual Heat Removal, Safety Related Auxiliary Cooling, Safety Related Diesel Generators, Hydrogen Re-Combiners, Ex-vessel Core Retention and Cooling. By fabricating the containment in a factory and eliminating most of the conventional safety systems, the construction schedule is shortened and the capital cost reduced to levels that would not otherwise be possible for a relatively small modular BWR. This makes the CM-BWR a candidate for applications where smaller incremental power additions are desired relative to a large ALWR or where the local infrastructure is not able to accommodate a conventional ALWR plant rated at 1350 MWe or more. This paper presents a preliminary design description of a Compact Modular BWR (CM-BWR) whose design features dramatically reduce the size and cost of the reactor building and associated safety systems. (author)

componente vegetal

Directory of Open Access Journals (Sweden)

Fabio Moscovich

2005-01-01

Full Text Available In order to determine environmental impact, indicators based on vegetation characteristics that would generate the forestry monoculture with the adjacent native forest, 32 sample unit were installed in an area of LIPSIA private enterprise, Esperanza Department, Misiones with those characteristics. The plots of 100 m2 were distributed systematically every 25 meters. The vegetation was divided in stratum: superior (DBH ≥ 10 cm, middle (1,6 cm ≤ DBH > 10 cm and inferior (DBH< cm. There were installed 10 plots in a logged native forest, 10 plots in a 18 years old Pinus elliottii Engelm. with approximately 400 trees/ha., 6 plots in a 10 – 25 years old Araucaria angustifolia (Bertd. Kuntze limiting area with approximately 900 trees/ha., and 6 plots located in this plantation. In the studied area were identified 150 vegetation species. In the inferior stratum there were found differences as function of various floristic diversity indexes. In all the cases the native forest showed larger diversity than plantations, followed by Pinus elliottii, Araucaria plantation and Araucaria limiting area. All the studied forest fitted to a logarithmical series of species distributions, that would indicate the incidence of a environmental factor in this distribution.

Carbon Sequestration Estimation of Street Trees Based on Point Cloud from Vehicle-Borne Laser Scanning System

Science.gov (United States)

Zhao, Y.; Hu, Q.

2017-09-01

Continuous development of urban road traffic system requests higher standards of road ecological environment. Ecological benefits of street trees are getting more attention. Carbon sequestration of street trees refers to the carbon stocks of street trees, which can be a measurement for ecological benefits of street trees. Estimating carbon sequestration in a traditional way is costly and inefficient. In order to solve above problems, a carbon sequestration estimation approach for street trees based on 3D point cloud from vehicle-borne laser scanning system is proposed in this paper. The method can measure the geometric parameters of a street tree, including tree height, crown width, diameter at breast height (DBH), by processing and analyzing point cloud data of an individual tree. Four Chinese scholartree trees and four camphor trees are selected for experiment. The root mean square error (RMSE) of tree height is 0.11m for Chinese scholartree and 0.02m for camphor. Crown widths in X direction and Y direction, as well as the average crown width are calculated. And the RMSE of average crown width is 0.22m for Chinese scholartree and 0.10m for camphor. The last calculated parameter is DBH, the RMSE of DBH is 0.5cm for both Chinese scholartree and camphor. Combining the measured geometric parameters and an appropriate carbon sequestration calculation model, the individual tree's carbon sequestration will be estimated. The proposed method can help enlarge application range of vehicle-borne laser point cloud data, improve the efficiency of estimating carbon sequestration, construct urban ecological environment and manage landscape.

US Intergroup Anal Carcinoma Trial: Tumor Diameter Predicts for Colostomy

Science.gov (United States)

Ajani, Jaffer A.; Winter, Kathryn A.; Gunderson, Leonard L.; Pedersen, John; Benson, Al B.; Thomas, Charles R.; Mayer, Robert J.; Haddock, Michael G.; Rich, Tyvin A.; Willett, Christopher G.

2009-01-01

Purpose The US Gastrointestinal Intergroup Radiation Therapy Oncology Group 98-11 anal carcinoma trial showed that cisplatin-based concurrent chemoradiotherapy resulted in a significantly higher rate of colostomy compared with mitomycin-based therapy. Established prognostic variables for patients with anal carcinoma include tumor diameter, clinical nodal status, and sex, but pretreatment variables that would predict the likelihood of colostomy are unknown. Methods A secondary analysis was performed by combining patients in the two treatment arms to evaluate whether new predictive and prognostic variables would emerge. Univariate and multivariate analyses were carried out to correlate overall survival (OS), disease-free survival, and time to colostomy (TTC) with pretreatment and treatment variables. Results Of 682 patients enrolled, 644 patients were assessable and analyzed. In the multivariate analysis, tumor-related prognosticators for poorer OS included node-positive cancer (P ≤ .0001), large (> 5 cm) tumor diameter (P = .01), and male sex (P = .016). In the treatment-related categories, cisplatin-based therapy was statistically significantly associated with a higher rate of colostomy (P = .03) than was mitomycin-based therapy. In the pretreatment variables category, only large tumor diameter independently predicted for TTC (P = .008). Similarly, the cumulative 5-year colostomy rate was statistically significantly higher for large tumor diameter than for small tumor diameter (Gray's test; P = .0074). Clinical nodal status and sex were not predictive of TTC. Conclusion The combined analysis of the two arms of RTOG 98-11, representing the largest prospective database, reveals that tumor diameter (irrespective of the nodal status) is the only independent pretreatment variable that predicts TTC and 5-year colostomy rate in patients with anal carcinoma. PMID:19139424

Araucaria forest management by the liocourt method, Painel municipality, SC

Directory of Open Access Journals (Sweden)

André Felipe Hess

2014-12-01

Full Text Available The aim of this study was to describe the diameter distribution and calculate the value of the Liocourt quotient 'q' for the species Araucaria angustifolia (Bertol. Kuntze in natural forest, as well as evaluating competition indexes in a fragment with an area of 74.2 ha. Fixed area sample plots of 400 m2 were used in this study, totaling one hectare sampling area. Trees with DBH > 10 cm were measured in all plots and later distributed in diameter classes for the calculation of the density probability function and competition index. The forest showed a density of 228 trees per hectare and basal area of 19.49 m2·ha-1. The value of the "q" quotient for the forest was 1.1, indicating that the recruitment and mortality rates are in equilibrium. The calculated competition indices showed that the forest is in a competition stage, with Glover and Holl index of 0.9798 and 0.7069 m2 for the BALmod.

Crown-Stump Diameter Model for Parkia biglobosa Benth. Species in Makurdi, Benue State, Nigeria

Directory of Open Access Journals (Sweden)

O. Chukwu

2017-07-01

Full Text Available The crown of tree is the centre of physiological activity which gives an indication of the potential photosynthetic capacity on a tree. Though, its measurement remains a challenge in forest inventory task. The ability to predict crown diameter from stump diameter provides an effective technique of obtaining its estimate. This helps in detecting the excessive tree felling than actual requirements and wildlife suitability.The main objective of this study was to develop and test crown diameter prediction models for silvicultural management of naturally grown Parkia biglobosa within the University of Agriculture, Makurdi. Nine 100 m x 100 m temporary sample plots were established using simple random sampling method. Crown diameter and stump diameter were measured in all living P. biglobosa trees with stump diameter ≥10.0 cm. Least square method was used to convert the counted stumps into harvested crown dimension. Three linear and three non-linear models using stump diameter as the exploratory variable were developed and evaluated using the adjusted coefficient of determination (Adj.R2, standard error of estimate (SEE, prediction error sum of squares (PRESS and Akaike information criterion (AIC. The crown-stump diameter relationship was best described by the double logarithmic function with .The result showed that Crown diameter estimation was feasible even when the only information available is stump diameter.The resulting equation was tested for validation with independent data obtained from additional plots and was found to be desirable for estimating the crown diameter for Parkia biglobosa in Makurdi, Benue State, Nigeria.

Growth of Araucaria angustifolia in the Embrapa/Epagri forest reserve, Caçador, SC, Brazil Crescimento de Araucaria angustifolia na Reserva Florestal Embrapa/ Epagri, Caçador, SC

Directory of Open Access Journals (Sweden)

Patricia Póvoa de Mattos

2010-06-01

Full Text Available Araucaria Forest is one of most threatened phyto-physiognomies in the Atlantic Forest domain,
presenting great ecological-economical importance. Nevertheless, there are still lacks of knowledge concerning growth and dynamic of important species, as Araucaria angustifolia. The objective of this work was to recover  the past growth of Araucaria angustifolia, native from Caçador, SC, Brazil, by measuring growth rings and to estimate the average periodic diametric increment. The growth rings were counted and measured, using a stereoscope microscope, in increment cores of 0.5 cm collected from 32 adult trees. The measurements were done with LINTAB measuring table, with 0.01 mm of precision. The samples sizes were irregular, varying from 4.2 to 20.2 cm long. The trees presented average diameter breast height (DBH of 76.3 cm, varying from 10.7 to 141.3 cm. The periodic diameter increment from the last 10 years was 0.4 cm, varying from 0.11 to 1.15 cm. It was observed differences among trees, but there was a tendency of reduction of growth rhythm in larger trees, being more
evident in trees with more than 110 cm of DBH.A Floresta Ombrófila Mista (FOM é uma das fitofisionomias mais ameaçadas da área de domínio da
Mata Atlântica, apresentando grande importância ecológico-econômica. Apesar disso, ainda existem lacunas de conhecimento sobre a produtividade primária, o crescimento e a dinâmica de espécies importantes, como a Araucaria angustifolia. O presente trabalho tem por objetivo estudar o crescimento anual de Araucaria angustifolia, nativa do Município de Caçador, SC, pela medição dos anéis de crescimento. A contagem e medição dos anéis de crescimento foram feitas com o auxílio de um microscópio estereoscópico, em baguetas de 0,5 cm de diâmetro, coletadas de 32 árvores adultas. As medições foram feitas com o medidor de anéis de crescimento LINTAB, com precisão de 0,01 mm. O comprimento das amostras �

DENDROMETRY CHARACTERISTICS OF EUCALYPTUS UROPHYLLA IN SILVOPASTORAL SYSTEM UNDER DIFFERENT PLANTING SPACINGS WITH BRACHIARIA DECUMBENS

Directory of Open Access Journals (Sweden)

Raphael Pavesi Araujo

2011-12-01

Full Text Available The objective of this study was to evaluate the effect of spacing on eucalyptus dendrometric characteristics in silvopastoral system with Brachiaria decumbens. Three eucalyptus spacing were used (3x2, 6x4 and 10x4 m. The randomized block design was used with factorial scheme (3x4 with three densities of planting eucalyptus (3x2, 6x4 and 10x4 m and four times of evaluation (6, 12, 18 and 24 months after planting. The dendrometric characteristics were evaluated: 0,30 m diameter, diameter at breast height - 1.30 m (DBH, cup diameter, height, biomass per tree and plant survival. It was found positive effect of months of evaluation for the diameter to 0.30 m, cup diameter and height. There were no effects of spacing for the variables DBH, survival and biomass per tree when evaluated at 24 months. There was effect for biomass per hectare being 3x2 m the best treatament. It can be concluded that the planting spacing only affected the biomass per hectare, when evaluated up to 24 months of Eucalyptus urophylla grown in silvopastoral system.

Effects of mixture and thinning in a tree farming valuable broadleaves plantation more than 20 years after the establishment.

Directory of Open Access Journals (Sweden)

Alessio Corazzesi

2010-12-01

Full Text Available The results of peduncolate Oak plantation trials where the Oak is mixed to wild Cherry and narrow-leaf Ash per line and per close mixture with different proportions (25% and 50% of N-fixing species (Black Locust and Italian Alder are described in the paper. The plantation, carried out in winter 1988-89, was framed into a reafforestation plan for spoil banks restoration. On a share of the plantation area, free thinnings foreseeing the release of about 70 target trees per hectare, were undertaken in 2001 and 2003; 21% and 27% of basal area were removed, respectively. In the latter trial, the crowns of target trees were completely isolated by felling all the surrounding trees. The performances of valuable timber broadleaves, the effects of intercropping and thinning on the growth of Oak target trees were analysed. Three inventories (2001, 2004 and 2008 and the annual monitoring of target trees growth were performed at the purpose. The two peduncolate Oak and narrow-leaf Ash trees showed the best performances among the set of valuable broadleaves, whilst wild cherry resulted not suited to local site conditions. A higher tree mortality occurred in the mixture with Black Locust. The mixture with both Nfixing species provided a stimulus to the Oak growth both in terms of dbh and tree height. Italian Alder resulted anyway less competitive and easy to manage, considering its progressive self-thinning, while Black Locust was aggressive enough to necessitate the control of its development by pollarding 7 years after the plantation. In the thinned plots, target trees showed significant diameter increments in comparison with control plots; maintaining year by year constant dbh increments of about 1 cm and crown’s diameter increment of about 50 cm. Intercropping with Italian Alder showed to be more effective than thinning on growth of the target trees. st1\\:*{behavior:url(#ieooui } /* Style Definitions */ table.MsoNormalTable {mso

Advanced-technology 30-cm-diameter mercury ion thruster

Science.gov (United States)

Beattie, J. R.; Kami, S.

1982-01-01

An advanced-technology mercury ion thruster designed for operation at high thrust and high thrust-to-power ratio is described. The laboratory-model thruster employs a highly efficient discharge-chamber design that uses high-field-strength samarium-cobalt magnets arranged in a ring-cusp configuration. Ion extraction is achieved using an advanced three-grid ion-optics assembly which utilizes flexible mounts for supporting the screen, accel, and decel electrodes. Performance results are presented for operation at beam currents in the range from 1 to 5 A. The baseline specific discharge power is shown to be about 125 eV/ion, and the acceptable range of net-to-total accelerating-voltage ratio is shown to be in the range of 0.2-0.8 for beam currents in the range of 1-5 A.

Multimodal quantitation of the effects of endovascular therapy for vasospasm on cerebral blood flow, transcranial doppler ultrasonographic velocities, and cerebral artery diameters.

Science.gov (United States)

Oskouian, Rod J; Martin, Neil A; Lee, Jae Hong; Glenn, Thomas C; Guthrie, Donald; Gonzalez, Nestor R; Afari, Arash; Viñuela, Fernando

2002-07-01

The goal of this study was to quantify the effects of endovascular therapy on vasospastic cerebral vessels. We reviewed the medical records for 387 patients with ruptured intracranial aneurysms who were treated at a single institution (University of California, Los Angeles) between May 1, 1993, and March 31, 2001. Patients who developed cerebral vasospasm and underwent cerebral arteriographic, transcranial Doppler ultrasonographic, and cerebral blood flow (CBF) studies before and after endovascular therapy for cerebral arterial spasm (vasospasm) were included in this study. Forty-five patients fulfilled the aforementioned criteria and were treated with either papaverine infusion, papaverine infusion with angioplasty, or angioplasty alone. After balloon angioplasty (12 patients), CBF increased from 27.8 +/- 2.8 ml/100 g/min to 28.4 +/- 3.0 ml/100 g/min (P = 0.87); the middle cerebral artery blood flow velocity was 1 57.6 +/- 9.4 cm/s and decreased to 76.3 +/- 9.3 cm/s (P < 0.05), with a mean increase in cerebral artery diameters of 24.4%. Papaverine infusion (20 patients) transiently increased the CBF from 27.5 +/- 2.1 ml/100 g/min to 38.7 +/- 2.8 ml/100 g/min (P < 0.05) and decreased the middle cerebral artery blood flow velocity from 109.9 +/- 9.1 cm/s to 82.8 +/- 8.6 cm/s (P < 0.05). There was a mean increase in vessel diameters of 30.1% after papaverine infusion. Combined treatment (13 patients) significantly increased the CBF from 33.3 +/- 3.2 ml/100 g/min to 41.7 +/- 2.8 ml/100 g/min (P< 0.05) and decreased the transcranial Doppler velocities from 148.9 +/- 12.7 cm/s to 111.4 +/- 10.6 cm/s (P < 0.05), with a mean increase in vessel diameters of 42.2%. Balloon angioplasty increased proximal vessel diameters, whereas papaverine treatment effectively dilated distal cerebral vessels. In our small series, we observed no correlation between early clinical improvement or clinical outcomes and any of our quantitative or physiological data (CBF, transcranial Doppler

Effects of Land-Use Change on Under Storey Species Composition and Distribution in a Tropical Rainforest

Directory of Open Access Journals (Sweden)

Anthony Ifechukwude ODIWE

2012-02-01

Full Text Available The forest lands conversion into tree crops plantations plays a major role in the loss of biodiversity. Therefore, understanding the impacts of land-use change on species diversity is very critical for ecosystem functioning and stability. This study was carried out to evaluate the effect of land-use changes on under storey species diversity in the Theobroma cacao and Citrus sinensis plantations. Two, 25 m 25 m plots were sampled in each plantation and a nearby undisturbed secondary rainforest for comparison. The diameters (dbh-1.3 m of all trees at breast height >10 cm were measured in each plot. Five line transect were systematically laid and a quadrat of 50 cm 50 cm placed at every 1 m point to identify the under storey species (herbaceous, shrubs, tree saplings and climbers present in each plot. Percentage canopy, species diversity using Shannon-Wiener, Simpsons index and Evenness were determined, while species similarity was determined using the Jaccards similarity index. Results indicate that woody basal area and stem density in Theobroma cacao were significantly (P

Database for Pressure Tube Diameter and Operation Data of Wolsong NPP

International Nuclear Information System (INIS)

Jung, Jong Yeob; Kim, W. Y.; Bae, J. H.; Park, J. H.

2010-12-01

Pressure tube of CANDU reactor which is a long cylindrical shape of its diameter about 10 cm and length of about 6m, can be expanded toward both radial and axial directions due to irradiation under the high pressure and temperature condition. As the irradiation period increases, the radial expansion due to creep of the pressure tube increases. The radial expansion of the pressure tube comes out the reduction of the coolability and it results in the power deration. The objectives of the current work is to establish the database for the measured diametral data of pressure tube and operational data from Wolsong NPP as a preliminary work of developing the prediction model for pressure tube diameter. In order to develop the database, measured data for total 86 channels were collected from Wolsong NPP 1, 2, 3 and 4 and analyzed. Based on the provided data, the operational conditions such as an axial temperature and a pressure of the channel and neutron fluxes were derived. All data were analysed to derive the correlation between the pressure tube diameter and the other operational parameters

Growth decline assessment in Pinus sylvestris L. and Pinus nigra Arnold. forest by using 3-PG model.

Directory of Open Access Journals (Sweden)

Rafael M. Navarro-Cerrillo

2016-12-01

Full Text Available Aim of the study: We assessed the ability of the 3-PG process-based model to accurately predict growth of Pinus sylvestris and P. nigra plantations across a range of sites, showing declining growth trends, in southern Spain. Area of study: The study area is located in “Sierra de Los Filabres” (Almería. Material and methods: The model was modified in fifteen parameters to predict diameter (DBH, cm, basal area increment (BAI, cm2 yr-1 and leaf area index (LAI, m2 m-2 in healthy trees and trees showing declining growth. We assumed that a set of specific physiological parameters (stem partitioning ratio-pFS20, maximum litterfall rate-γFx, maximum canopy conductance-gCx, specific leaf area for mature aged stands-σ1, age at which specific leaf area = ½ (σ0 + σ1, age at full canopy cover-tc, and canopy boundary layer conductance-gB included in 3-PG would be suitable for predicting growth decline related to climate conditions. The calibrated model was evaluated using dendrochronological and LAI data obtained from plots. Main results: Observed and simulated DBH showed a high correlation (R2 > 0.99 between modelled and measured values for both species. In contrast, modelled and observed BAI showed lower correlation (R2 < 0.68. Sensitivity analysis on 3-PG outputs showed that the foliage parameters - maximum litterfall rate, maximum canopy conductance, specific leaf area for mature aged stands, age at which specific leaf area, and age at full canopy cover - were important for DBH and BAI predictions under drought stress. Research highlights: Our overall results indicated that the 3-PG model could predict growth response of pine plantations to climatic stress with desirable accuracy in southern Spain by using readily available soil and climatic data with physiological parameters derived from experiments. Keywords: Hybrid process model; forest management models; growth prediction; Pinus spp, Parameterization; forest decline.

Effect of location and diameter of the branch in three genotypes of Myrciaria dubia (HBK "camu camu" for vegetative propagation by air layering

Directory of Open Access Journals (Sweden)

Jiang Oliver Liao Torres

2012-09-01

Full Text Available The objective of this study was to evaluate the effect of the location and diameter of the branch in three genotypes of camu camu using the technique of air layering on rooting and sprouting. The mother plants were bent and then rooted branches were transplanted following the design of randomized complete block with three replications. At 3 months after transplantation was the assessment of the variables, finding the best values for the number of roots to the middle third, thick diameter, Genotype MD-015 and the upper, thick diameter, Genotype MD-015 with 28.67 and 28.33 roots, respectively, in the variable length of the upper third roots, thick diameter, Genotype MD-015 showed the best results with 15.27 cm. Regarding the number of outbreaks upper, thick diameter, Genotype MD-014 and the upper, thick diameter, Genotype MD-015 achieved the best results with 13.00 and 12.67 outbreaks, respectively, in the length of shoots, the best treatment was the upper, thick diameter, Genotype MD-015 with 30.73 cm, and finally in the variable number of leaves / shoot highlights the upper, thick diameter, Genotype MD-014 and the upper, thick diameter, Genotype MD-015 with 15.10 leaves per shoot and 14.83, respectively. The results allowed identifying the upper, thick diameter, Genotype MD-015 as the best in terms of rooting and sprouting capacity.

A biokinetic model of inhaled Cm compounds in dogs: Application to human exposure data

International Nuclear Information System (INIS)

Guilmette, R.A.; Mewhinney, J.A.

1989-01-01

Curium isotopes are major by-products in irradiated nuclear reactor fuel and comprise a significant fraction of the alpha-emitting radionuclide inventory. Although little use is currently being made of purified Cm sources, such usage is possible if reprocessing of spent fuel becomes feasible. Because little information is available on the biokinetics and dosimetry of inhaled Cm compounds, a study was conducted in which adult beagle dogs received a single inhalation exposure to either a monodisperse aerosol of 244Cm2O3 (1.4 micron activity median aerodynamic diameter [AMAD]; sigma g = 1.16) or a polydisperse aerosol of 244Cm (NO3)3 (1.1 micron AMAD; sigma g = 1.74). At times ranging from 4 h to 2 y after exposure, animals were sacrificed and their tissues analyzed for Cm content. The data describing the uptake and retention of 244Cm in the different organs and tissues and the measured rates of excretion of these dogs formed the basis on which a biokinetic model of Cm metabolism was constructed. This Cm model was based on a previously published model of the biokinetics of 241Am that was shown to be applicable to data from human cases of inhalation exposure to 241Am aerosols. This Cm model was found to be adequate to describe the biological distribution of Cm in dogs and was also applied to the sparse data from humans. Reasonable agreement was found between the model predictions for lung retention of Cm and for urinary excretion patterns in humans

Regional Models of Diameter as a Function of Individual Tree Attributes, Climate and Site Characteristics for Six Major Tree Species in Alberta, Canada

Directory of Open Access Journals (Sweden)

Dan A. MacIsaac

2011-09-01

Full Text Available We investigated the relationship of stem diameter to tree, site and stand characteristics for six major tree species (trembling aspen, white birch, balsam fir, lodgepole pine, black spruce, and white spruce in Alberta (Canada with data from Alberta Sustainable Resource Development Permanent Sample Plots. Using non-linear mixed effects modeling techniques, we developed models to estimate diameter at breast height using height, crown and stand attributes. Mixed effects models (with plot as subject using height, crown area, and basal area of the larger trees explained on average 95% of the variation in diameter at breast height across the six species with a root mean square error of 2.0 cm (13.4% of mean diameter. Fixed effects models (without plot as subject including the Natural Sub-Region (NSR information explained on average 90% of the variation in diameter at breast height across the six species with a root mean square error equal to 2.8 cm (17.9% of mean diameter. Selected climate variables provided similar results to models with NSR information. The inclusion of nutrient regime and moisture regime did not significantly improve the predictive ability of these models.

Generation of longitudinally polarized terahertz pulses with field amplitudes exceeding 2 kV/cm

Energy Technology Data Exchange (ETDEWEB)

Cliffe, M. J., E-mail: Matthew.Cliffe@manchester.ac.uk; Rodak, A.; Graham, D. M. [School of Physics and Astronomy and the Photon Science Institute, The University of Manchester, Manchester M13 9PL (United Kingdom); The Cockcroft Institute, Sci-Tech Daresbury, Keckwick Lane, Daresbury, Warrington WA4 4AD (United Kingdom); Jamison, S. P. [The Cockcroft Institute, Sci-Tech Daresbury, Keckwick Lane, Daresbury, Warrington WA4 4AD (United Kingdom); Accelerator Science and Technology Centre, Science and Technology Facilities Council, Darebsury Laboratory, Keckwick Lane, Daresbury, Warrington WA4 4AD (United Kingdom)

2014-11-10

We demonstrate the generation of near-single cycle longitudinally polarized terahertz radiation using a large-area radially biased photoconductive antenna with a longitudinal field amplitude in excess of 2 kV/cm. The 76 mm diameter antenna was photo-excited by a 0.5 mJ amplified near-infrared femtosecond laser system and biased with a voltage of up to 100 kV applied over concentric electrodes. Amplitudes for both the transverse and longitudinal field components of the source were measured using a calibrated electro-optic detection scheme. By tightly focusing the radiation emitted from the photoconductive antenna, we obtained a maximum longitudinal field amplitude of 2.22 kV/cm with an applied bias field of 38.5 kV/cm.

Generation of longitudinally polarized terahertz pulses with field amplitudes exceeding 2 kV/cm

International Nuclear Information System (INIS)

Cliffe, M. J.; Rodak, A.; Graham, D. M.; Jamison, S. P.

2014-01-01

We demonstrate the generation of near-single cycle longitudinally polarized terahertz radiation using a large-area radially biased photoconductive antenna with a longitudinal field amplitude in excess of 2 kV/cm. The 76 mm diameter antenna was photo-excited by a 0.5 mJ amplified near-infrared femtosecond laser system and biased with a voltage of up to 100 kV applied over concentric electrodes. Amplitudes for both the transverse and longitudinal field components of the source were measured using a calibrated electro-optic detection scheme. By tightly focusing the radiation emitted from the photoconductive antenna, we obtained a maximum longitudinal field amplitude of 2.22 kV/cm with an applied bias field of 38.5 kV/cm

Failure Diameter Resolution Study

Energy Technology Data Exchange (ETDEWEB)

Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-12-19

Previously the SURFplus reactive burn model was calibrated for the TATB based explosive PBX 9502. The calibration was based on fitting Pop plot data, the failure diameter and the limiting detonation speed, and curvature effect data for small curvature. The model failure diameter is determined utilizing 2-D simulations of an unconfined rate stick to find the minimum diameter for which a detonation wave propagates. Here we examine the effect of mesh resolution on an unconfined rate stick with a diameter (10mm) slightly greater than the measured failure diameter (8 to 9 mm).

Estimating Forest Aboveground Biomass by Combining ALOS PALSAR and WorldView-2 Data: A Case Study at Purple Mountain National Park, Nanjing, China

Directory of Open Access Journals (Sweden)

Songqiu Deng

2014-08-01

Full Text Available Enhanced methods are required for mapping the forest aboveground biomass (AGB over a large area in Chinese forests. This study attempted to develop an improved approach to retrieving biomass by combining PALSAR (Phased Array type L-band Synthetic Aperture Radar and WorldView-2 data. A total of 33 variables with potential correlations with forest biomass were extracted from the above data. However, these parameters had poor fits to the observed biomass. Accordingly, the synergies of several variables were explored to identify improved relationships with the AGB. Using principal component analysis and multivariate linear regression (MLR, the accuracies of the biomass estimates obtained using PALSAR and WorldView-2 data were improved to approximately 65% to 71%. In addition, using the additional dataset developed from the fusion of FBD (fine beam dual-polarization and WorldView-2 data improved the performance to 79% with an RMSE (root mean square error of 35.13 Mg/ha when using the MLR method. Moreover, a further improvement (R2 = 0.89, relative RMSE = 17.08% was obtained by combining all the variables mentioned above. For the purpose of comparison with MLR, a neural network approach was also used to estimate the biomass. However, this approach did not produce significant improvements in the AGB estimates. Consequently, the final MLR model was recommended to map the AGB of the study area. Finally, analyses of estimated error in distinguishing forest types and vertical structures suggested that the RMSE decreases gradually from broad-leaved to coniferous to mixed forest. In terms of different vertical structures (VS, VS3 has a high error because the forest lacks undergrowth trees, while VS4 forest, which has approximately the same amounts of stems in each of the three DBH (diameter at breast height classes (DBH > 20, 10 ≤ DBH ≤ 20, and DBH < 10 cm, has the lowest RMSE. This study demonstrates that the combination of PALSAR and WorldView-2 data

Estimation of radioactive contaminants in Cm242 and Cm244 isotopic fuels

International Nuclear Information System (INIS)

Terent'ev, V.P.; Makarenko, A.I.

1972-01-01

The radiation properties of Cm 242 and Cm 244 preparations and the effect on them of possible contaminants are considered. One of the most important requirements for K alpha active fuels for radioisotope thermoelectric batteries is ensuring a low ionizing radiation background. In determining the effect of impurities on the radiation properties of a preparation, quantitative evaluation of certain factors is sufficient. In a Cm 242 preparation it is possible to show that Am 241 and Cm 243 are undesirable impurities. The presence of Am 241 increases the soft gamma output by 20%. The presence of Cm 243 may double the dose rate from an unshielded preparation and increase the hard gamma output 10-fold. The properties of Cm 242 preparations deteriorate when Am 243 and Cm 243 are present

Mass of Prunus africana stem barks on Tchabal mbabo and Tchabal ...

African Journals Online (AJOL)

GREG

2013-05-10

May 10, 2013 ... pygeum trees in Ganga Daba and Mbabo respectively. Key words: ..... Where, Da is the diameter at the logging level of the tree = DBH; Du ...... Expert Workshop on Non-Detriment Findings, Mexico, November 17-. 22,. 2008.

AUTOMATIC DETERMINATION OF TRUNK DIAMETER, CROWN BASE AND HEIGHT OF SCOTS PINE (PINUS SYLVESTRISL. BASED ON ANALYSIS OF 3D POINT CLOUDS GATHERED FROM MULTI-STATION TERRESTRIAL LASER SCANNING

Directory of Open Access Journals (Sweden)

Ratajczak Michał

2015-12-01

Full Text Available Rapid development of terrestrial laser scanning (TLS in recent years resulted in its recognition and implementation in many industries, including forestry and nature conservation. The use of the 3D TLS point clouds in the process of inventory of trees and stands, as well as in the determination of their biometric features (trunk diameter, tree height, crown base, number of trunk shapes, trees and lumber size (volume of trees is slowly becoming a practice. In addition to the measurement precision, the primary added value of TLS is the ability to automate the processing of the clouds of points 3D in the direction of the extraction of selected features of trees and stands. The paper presents the original software (GNOM for the automatic measurement of selected features of trees, based on the cloud of points obtained by the ground laser scanner FARO. With the developed algorithms (GNOM, the location of tree trunks on the circular research surface was specified and the measurement was performed; the measurement covered the DBH (l: 1.3m, further diameters of tree trunks at different heights of the tree trunk, base of the tree crown and volume of the tree trunk (the selection measurement method, as well as the tree crown. Research works were performed in the territory of the Niepolomice Forest in an unmixed pine stand (PinussylvestrisL. on the circular surface with a radius of 18 m, within which there were 16pine trees (14 of them were cut down. It was characterized by a two-storey and even-aged construction (147 years old and was devoid of undergrowth. Ground scanning was performed just before harvesting. The DBH of 16 pine trees was specified in a fully automatic way, using the algorithm GNOM with an accuracy of +2.1%, as compared to the reference measurement by the DBH measurement device. The medium, absolute measurement error in the cloud of points - using semi-automatic methods "PIXEL" (between points and PIPE (fitting the cylinder in the FARO

Growth and yield of mixed polyclonal stands of Populus in short-rotation coppice

Energy Technology Data Exchange (ETDEWEB)

Benbrahim, Mohammed; Gavaland, Andre [INRA centre de Toulouse (France). Unite Agroforesterie et foret Paysanne; Gauvin, Jean [INRA centre d' Orleans (France). Unite d' Amelioration des arbres forestiers

2000-07-01

Eight clones of poplar were used to compare the growth and productivity of monoclonal and polyclonal mixed plantations in short-rotation coppice. At the end of the eight growing season, the diameter at breast height (DBH) and height of trees were measured and dry weight and yield were estimated. Polyclonal mixtures did not affect mortality. Few differences in growth were observed between clones in monoclonal plots. Polyclonal mixture slightly affected the growth and tree size of the clones compared with monoclonal plots. No increase in stand heterogeneity in relation to clone deployment was observed. A neighbourhood index was calculated for each tree and was significantly affected by polyclonal mixture. However, the relationship between the neighbourhood index and the DBH indicated that this effect did not cause a great change in DBH. Consequently, dry weight and yield productivity were not affected by clone deployment.

Instability of Reference Diameter in the Evaluation of Stenosis After Coronary Angioplasty: Percent Diameter Stenosis Overestimates Dilative Effects Due to Reference Diameter Reduction

International Nuclear Information System (INIS)

Hirami, Ryouichi; Iwasaki, Kohichiro; Kusachi, Shozo; Murakami, Takashi; Hina, Kazuyoshi; Matano, Shigeru; Murakami, Masaaki; Kita, Toshimasa; Sakakibara, Noburu; Tsuji, Takao

2000-01-01

Purpose: To examine changes in the reference segment luminal diameter after coronary angioplasty.Methods: Sixty-one patients with stable angina pectoris or old myocardial infarction were examined. Coronary angiograms were recorded before coronary angioplasty (pre-angioplasty) and immediately after (post-angioplasty), as well as 3 months after. Artery diameters were measured on cine-film using quantitative coronary angiographic analysis.Results: The diameters of the proximal segment not involved in the balloon inflation and segments in the other artery did not change significantly after angioplasty, but the reference segment diameter significantly decreased (4.7%). More than 10% luminal reduction was observed in seven patients (11%) and more than 5% reduction was observed in 25 patients (41%). More than 5% underestimation of the stenosis was observed in 22 patients (36%) when the post-angioplasty reference diameter was used as the reference diameter, compared with when the pre-angioplasty measurement was used and more than 10% underestimation was observed in five patients (8%).Conclusion: This study indicated that evaluation by percent diameter stenosis, with the reference diameter from immediately after angioplasty, overestimates the dilative effects of coronary angioplasty, and that it is thus better to evaluate the efficacy of angioplasty using the absolute diameter in addition to percent luminal stenosis

Effects of Repeated Growing Season Prescribed Fire on the Structure and Composition of Pine–Hardwood Forests in the Southeastern Piedmont, USA

Directory of Open Access Journals (Sweden)

Matthew J. Reilly

2016-12-01

Full Text Available We examined the effects of repeated growing season prescribed fire on the structure and composition of mixed pine–hardwood forests in the southeastern Piedmont region, Georgia, USA. Plots were burned two to four times over an eight-year period with low intensity surface fires during one of four six-week long periods from early April to mid-September. Density of saplings (0.25–11.6 cm diameter at breast height was significantly reduced after one or two fires during the first four-year period. Sapling density declined with additional burning over the next four years, but density of mesic hardwoods including sweetgum (Liquidambar styraciflua and red maple (Acer rubrum remained relatively high (~865 stems ha−1. Repeated burning had little effect on density or basal area of trees (≥11.7 cm dbh and changes in overstory structure were limited to small increases in the quadratic mean diameter of all trees and pines. We found little evidence to suggest differential effects on structure or composition due to timing of burn within the growing season. Although repeated growing season burning alters midstory structure and composition, burning alone is unlikely to result in immediate shifts in overstory composition or structure in mixed pine–hardwood forests of the southeastern Piedmont region.

The influence of regeneration fellings on the development of artificially regenerated beech (Fagus sylvatica L.) plantations

Czech Academy of Sciences Publication Activity Database

Bednář, Pavel; Černý, J.

2014-01-01

Roč. 62, č. 5 (2014), s. 859-867 ISSN 1211-8516 Institutional support: RVO:67179843 Keywords : European beech * regeneration felling * artificial regeneration * height * DBH – the diameter at breast-height * quality * ISF – Indirect Site Factor Subject RIV: GK - Forestry

SU-E-T-134: Assessing the Capabilities of An MU Model for Fields as Small as 2cm in a Passively Scattered Proton Beam

International Nuclear Information System (INIS)

Simpson, R; Ghebremedhin, A; Gordon, I; Patyal, B

2015-01-01

Purpose: To assess and expand the capabilities of the current MU model for a passively scattered proton beam. The expanded MU model can potentially be used to predict the dose/MU for fields smaller than 2cm in diameter and reduce time needed for physical calibrations. Methods: The current MU model accurately predicted the dose/MU for more than 800 fields when compared to physical patient calibrations. Three different ion chambers were used in a Plastic Water phantom for physical measurements: T1, PIN, and A-16. The original MU model predicted output for fields that were affected by the bolus gap factor (BGF) and nozzle extension factor (NEF). As the system was tested for smaller treatment fields, the mod wheel dependent field size factor (MWDFSF) had to be included to describe the changes observed in treatment fields smaller than 3cm. The expanded model used Clarkson integration to determine the appropriate value for each factor (field size factor (FSF), BGF, NEF, and MWDFSF), to accurately predict the dose/MU for fields smaller than 2.5cm in effective diameter. Results: The expanded MU model demonstrated agreement better than 2% for more than 800 physical calibrations that were tested. The minimum tested fields were 1.7cm effective diameter for 149MeV and 2.4cm effective diameter for 186MeV. The inclusion of Clarkson integration into the MU model enabled accurate prediction of the dose/MU for very small and irregularly shaped treatment fields. Conclusion: The MU model accurately predicted the dose/MU for a wide range of treatment fields used in the clinic. The original MU model has been refined using factors that were problematic to accurately predict the dose/MU: the BGF, NEF, and MWDFSF. The MU model has minimized the time for determining dose/MU and reduced the time needed for physical calibrations, improving the efficiency of the patient treatment process

Allometry of a neotropical palm, Euterpe edulis Mart. Alometria de uma palmeira Neotropical, Euterpe edulis Mart

Directory of Open Access Journals (Sweden)

Luciana F. Alves

2004-06-01

Full Text Available The stem allometry (stem diameter vs. tree height of a Neotropical palm (Euterpe edulis found in rain and seasonal forest of Southeastern Brazil was examined. Observed height-diameter relationships along the stem (diameter at ground level, (dgl, and diameter at breast height (dbh were compared to three theoretical stability mechanical models: elastic similarity, stress similarity and geometric similarity. Slopes of log-transformed height-diameter relationships did not lie near those predicted by any stability mechanical models. Significant differences in stem allometry were found when comparing dgl to dbh, suggesting greater increase in dbh with height. The relationship between stability safety factor (SSF and palm height showed that both dgl and dbh were found to be above McMahon's theoretical buckling limit for dicotyledonous trees, but some individuals approached this limit in relation to dbh. Despite displaying a similar decreasing pattern of SSF with height, differences found in SSF along the stem - greater SSF for dgl when compared to dbh - indicate that the risk of mechanism failure in palms depends upon the size and varies along the stem. Distinct allometric relationships along the stem obtained for Euterpe edulis may be reflecting possible differences in stem design and growth strategies.Neste trabalho foram analisadas as relações entre o diâmetro e a altura de uma palmeira Neotropical (Euterpe edulis comum na Floresta Atlântica do SE do Brasil. As relações observadas entre a altura e o diâmetro ao longo do estipe (diâmetro ao nível do solo (DAS, e diâmetro ao nível do peito (DAP foram comparadas a três modelos teóricos de estabilidade mecânica: similaridade elástica, similaridade de estresse e similaridade geométrica. As inclinações das regressões altura-diâmetro não se ajustaram a nenhum dos modelos de estabilidade mecânica. Diferenças significativas na alometria do estipe foram encontradas comparando-se as rela

Impact of a Mountain Pine Beetle Outbreak on Young Lodgepole Pine Stands in Central British Columbia

Directory of Open Access Journals (Sweden)

Amalesh Dhar

2015-09-01

Full Text Available The current mountain pine beetle (MPB (Dendroctonous ponderosae Hopkins epidemic has severely affected pine forests of Western Canada and killed millions of hectares of lodgepole pine (Pinus contorta Dougl. ex Loud. var. latifolia Engelm. forest. Generally, MPB attack larger and older (diameter > 20 cm or >60 years of age trees, but the current epidemic extends this limit with attacks on even younger and smaller trees. The study’s aim was to investigate the extent of MPB attack in young pine stands and its possible impact on stand dynamics. Although MPB attacks were observed in trees as small as 7.5 cm diameter at breast height (DBH and as young as 13 years old, the degree of MPB attack (percent stems ha−1 increased with increasing tree diameter and age class (13–20, 21–40, 41–60, and 61–80 years old (6.4%, 49.4%, 62.6%, and 69.5% attack, respectively, by age class which is greater than that reported from previous epidemics for stands of this age. The mean density of surviving residual structure varied widely among age classes and ecological subzones. Depending on age class, 65% to 77% of the attacked stands could contribute to mid-term timber supply. The surviving residual structure of young stands offers an opportunity to mitigate the effects of MPB-attack on future timber supply, increase age class diversity, and enhance ecological resilience in younger stands.

Pengaruh Diameter Partikel Terhadap Konsentrasi L-Dopa, Kc Dan De Pada Ekstraksi L-Dopa Dari Biji Kara Benguk (Mucuna Pruriens Dc.

Directory of Open Access Journals (Sweden)

Eni Budiyati

2013-10-01

Full Text Available Mucuna pruriens (biji kara benguk merupakan tanaman penghasil bahan obat-obatan karena mengandung senyawa L-Dopa. Senyawa tersebut dapat digunakan untuk pengobatan penyakit gangguan syaraf, anti bisa ular, meningkatkan bobot dan kekuatan otot, vitalitas seksual pria, zat anti-aging dan obat cacing pada manusia. Penelitian ini bertujuan untuk mengekstraksi L- Dopa dari biji kara benguk dengan menggunakan pelarut air. Di samping itu, penelitian ini juga mengevaluasi pengaruh dari diameter partikel terhadap konsentrasi L- dopa hasil ekstraksi, koefisien transfer massa (kC, dan difusivitas efektif (De. Tahapan yang digunakan pada penelitian ini adalah, persiapan bahan baku, proses ekstraksi, dan analisis L-Dopa. Proses ekstraksi dilakukan dalam tangki yang dilengkapi dengan thermometer. Analisis L-Dopa dilakukan dengan dengan High Performance Liquid Chromatography (HPLC. Hasil penelitian menunjukkan bahwa semakin kecil diameter partikel maka konsentrasi L-Dopa terekstrak semakin besar. Konsentrasi tertinggi diperoleh pada diameter partikel 0,5 mm yaitu 1739,56 ppm. Nilai difusivitas efektif (De untuk variabel diameter partikel (0,5; 0,675; 2,18; dan 2,5 mm hampir sama yaitu 2,99.10–5 sampai 3,07.10–5 cm2/menit. Sedangkan nilai koefisien transfer massa (kC berbanding terbalik dengan diameter partikel. Nilai kC berkisar antara 2,83.10-2 sampai 3,98.10-2 g/cm2.menit. 

Efeito da exploração madeireira sobre o número de indivíduos férteis de três espécies arbóreas comerciais na Amazônia oriental Effects of logging on the number of fertile individuals of three commercial tree species in Eastern Amazonia

Directory of Open Access Journals (Sweden)

Marisa Gesteira Fonseca

2008-12-01

lurida e Pseudopiptadenia psilostachya per size class, and (2 the impact of harvesting 90% of individuals > 50 cm dbh on the number of reproductive trees. We sampled 80 L. lurida, 76 P. psilostachya and 76 C. lucentifolium trees during one reproductive season. We estimated that 14.9% of all fertile individuals of C. lucentifolium, 35.9% of L. lurida and 72.4% of P. psilostachya were > 50 cm dbh in that year. Therefore, the harvest of 90% of these trees would cause a 13.4%, 32.6 %, and 65.2 % reduction in the number of fertile individuals of C. lucentifolium, L. lurida and P. psilostachya, respectively. If these proportions were stable over time, it would be necessary to keep 30% instead of 10% of individuals > 50 cm dbh in order to preserve half of the P. psilostachya fertile individuals. The results indicate that the effects of adopting a single minimum cutting diameter and of setting aside the same proportion of trees above that diameter on the proportion of remaining fertile individuals may vary by a factor of five among species.

Mapping beech (Fagus sylvatica L.) forest structure with airborne hyperspectral imagery

CSIR Research Space (South Africa)

Cho, Moses A

2009-06-01

Full Text Available The objective of this study was to assess the utility of hyperspectral data in estimating and mapping forest structural parameters including mean diameter-at-breast-height (DBH), mean tree height and tree density of a closed canopy beech forest...

Development of a Modelling to Correlate Site and Diameter of Brain Metastases with Hippocampal Sparing Using Volumetric Modulated Arc Therapy

Directory of Open Access Journals (Sweden)

Silvia Chiesa

2013-01-01

Full Text Available Purpose. To correlate site and diameter of brain metastases with hippocampal sparing in patients treated by RapidArc (RA technique on whole brain with simultaneously integrated boost (SIB. Methods and Materials. An RA plan was calculated for brain metastases of 1-2-3 cm of diameter. The whole brain dose was 32.25 Gy (15 fractions, and SIB doses to brain metastases were 63 Gy (2 and 3 cm or 70.8 Gy (1 cm. Plans were optimized and evaluated for conformity, target coverage, prescription isodose to target volume, homogeneity index, and hippocampal sparing. Results. Fifteen brain lesions and RA plan were generated. Hippocampal volume was 4.09 cm3, and hippocampal avoidance volume was 17.50 cm3. Related to site of metastases, the mean hippocampal dose was 9.68 Gy2 for occipital lobe, 10.56 Gy2 for frontal lobe, 10.56 Gy2 for parietal lobe, 10.94 Gy2 for deep brain structures, and 40.44 Gy2 for temporal lobe. The mean hippocampal dose was 9.45 Gy2, 10.15 Gy2, and 11.70 Gy2 for diameter’s metastases of 1.2 and 3 cm, respectively, excluding results relative to temporal brain lesions. Conclusions. Location more than size of metastases can adversely influence the hippocampus sparing. Further investigation is necessary to meet definitive considerations.

Sugar maple height-diameter and age-diameter relationships in an uneven-aged northern hardwood stand

Science.gov (United States)

Laura S. Kenefic; R.D. Nyland

1999-01-01

Sugar maple (Acer saccharum Marsh.) height-diameter and age-diameter relationships are explored in a balanced uneven-aged northern hardwood stand in central New York. Results show that although both height and age vary considerably with diameter, these relationships can be described by statistically valid equations. The age-diameter relationship...

Phytosociology of planted and natural mangrove forests in the estuary of the Ostras River, Rio de Janeiro State, Brazil

Directory of Open Access Journals (Sweden)

Elaine Bernini

2014-03-01

Full Text Available The phytosociology of planted and natural mangrove forests were compared in the estuary of the Ostras River, Rio de Janeiro State, Brazil. Vegetation sampling was performed by the plot method, and the diameter at breast height (DBH and height of individuals > 1 m tall were recorded. The results indicated that the planted forest had lower average DBH and basal area and higher density of trunks in relation to natural forest. The distribution of individuals by height class and the distribution of stems per diameter class showed that the planted forest was younger. Laguncularia racemosa and Rhizophora mangle occurred in both forests, while Avicennia schaueriana was found only in the planted forest. Laguncularia racemosa showed greater dominance and relative density at all sites analyzed, probably because it is characteristic of sites with less marine influence and the fact that the estuary had been altered by human disturbance.

Evaluation of neutron cross sections for 244Cm, 246Cm, and 248Cm

International Nuclear Information System (INIS)

Benjamin, R.W.; McCrosson, F.J.; Gettys, W.E.

1977-01-01

An evaluation of neutron cross sections for 244 246 248 Cm using the ENDF/B format is presented. Primary data input included differential measurements, integral measurements, nuclear model calculations, and reactor production experience

Carbon Sequestration of Caesalpinia platyloba S. Watt (Leguminosae) (Lott 1985) in the Tropical Deciduous Forest

Science.gov (United States)

Diaz-Gustavo, Norma; Martínez-Salvador, Martín; García-Hernández, José Luís; Norzagaray-Campos, Mariano; Luna-González, Antonio; González-Ocampo, Héctor Abelardo

2015-01-01

Caesalpinia platyloba was evaluated as an alternative for the retention of atmospheric carbon and as a feasible and viable economic activity in terms of income for tropical deciduous forest (TDF) peasants in the carbon markets. A total of 110 trees of C. platyloba from plantations and a TDF in the Northwest of Mexico were sampled. Growth (increase in height, diameter, and volume curves) was adjusted to assess their growth. Growth of individuals (height, diameter at breast height [DBH], age, and tree crown cover) was recorded. The Schumacher model (H = β 0 e β1•E-1), by means of the guided curve method, was used to adjust growth models. Information analysis was made through the non-linear procedure with the multivariate secant or false position (DUD) method using the SAS software. Growth and increase models revealed acceptable adjustments (pseudo R2>0.8). C. platyloba reaches >8m of height with 12cm in diameter and 550cm3 of volume, presenting the highest increase at 11 years considered as basal age. Highest significant density of wood was in good quality sites (0.80g•cm-3), with a carbon content (average of 99.15tC•ha-1) at the highest density of 2500 trees•ha-1 (without thinning). Average incomes of US$483.33tC•ha-1 are expected. The profitability values (NPW = US$81,646.65, IRR = 472%, and B/C = 0.82) for C. platyloba make its cultivation a viable and profitable activity, considering a management scheme of the income derived from wood selling and from carbon credits. PMID:25992905

243Cm half-life determinaton

International Nuclear Information System (INIS)

Timofeev, G.A.; Kalygin, V.V.; Privalova, P.A.

1986-01-01

By molar ratios of 243 Cm mixture with 244 Cm and Pu nuclides formed as a result of Cm nuclides α-decay the 243 Cm half-life T α243 is determined. The 244 Cm half-life is measured earlier with high accuracy. The 243 Cm/ 244 Cm ratio measured by means of a mass spectrometer equals 0.989+-0.004. The obtained value T α243 =29.20+-0.14 years

Comparison of four harvesting systems in a loblolly pine plantation

Science.gov (United States)

J. Klepac; Dana Mitchell

2016-01-01

Felling and skidding operations were monitored while clearcut harvesting a 12-acre area of a 14-year old loblolly pine (Pinus taeda) plantation. The study area contained 465 trees per acre for trees 2.0 inches Diameter at Breast Height (DBH) and larger with a Quadratic Mean Diameter (QMD) of 7.26 inches. Two feller-bunchers (tracked and rubber-tired) and two skidders (...

Uptake and distribution of Pu, Am, Cm and Np in four plant species

Energy Technology Data Exchange (ETDEWEB)

Schreckhise, R G; Cline, J F [Battelle, Pacific Northwest Laboratories, Richland, WA (United States)

1978-12-01

The relative uptake of the nitrate forms of {sup 238}Pu, {sup 239}Pu, {sup 241}Sm, {sup 244}Cm and {sup 237}Np from soil into selectee parts of four different plant species grown under field conditions were observed. Cheatgrass (Bromus tectorum L.), peas (Pisum sativum, var. Blue Bonnet), barley (Hordeum vulgare, var. U. Cal. Briggs), and alfalfa (Medicago sativa, var. Ranger) were grown outdoors in contaminated soil contained in small weighing lysimeters constructed from 13.2 cm diameter by 1-meter-long polyvinyl chloride pipe. The amended soil, containing 0.1 to 1.0 mCi of each isotope individually per 3.4 kg soil, was situated in a 20 cm band and covered by 10 cm of uncontaminated soil to eliminate chances of windblown contamination to the surrounding environs. The plants were harvested at maturity, divided into selected components and radiochemically analyzed by alpha-energy analysis. There did not appear to be any effect of soil concentration on the plant uptake of {sup 238}Pu, {sup 239}Pu, {sup 241}Am or {sup 244}Cm for the two levels utilized (approximately 0.03 and 0.3 {mu}Ci/g soil). The relative uptake of {sup 238}Pu and {sup 239}Pu were not significantly different. Likewise, {sup 241} Am uptake values were not significantly different from the {sup 244}Cm values. The relative plant uptake of the four different transuranium element was: Np > Cm {approx} Am > Pu. The relative uptake values of Np were 2,200 to 45,000 times greater than for Pu, while Am and Cm values were 10 to 20 times greater. The seeds were significantly lower than the rest of the above ground plant parts for all four transuranics. The legumes accumulated approximately ten times more than the grasses. A hypothetical comparison of the radionuclide content of plants grown in soil contaminated with LMFBR fuels indicate that Am, Cm and Np concentrations would exceed Pu values. (author)

Tree competition and species coexistence in a Quercus--Betula forest in the Dongling Mountains in northern China

Science.gov (United States)

Hou, Ji-hua; Mi, Xiang-cheng; Liu, Can-ran; Ma, Ke-ping

2006-09-01

The population size structure, growth dynamics and mode of competition among adult trees (≥ 4 cm DBH) of six abundant tree species in a 5 ha study plot of a temperate deciduous forest in the Dongling Mountains in northern China were investigated using diffusion and growth dynamics models. In the year of 2000, two dominant species, Quercus liaotungensis and Betula dahurica accounted for ca. 68.69% of the total basal area and 52.71% of the total density of adult plants. Q. liaotungensis, Populus davidiana and Acer mono exhibited inverse J-shaped DBH distributions whereas Betula dahurica, B. platyphylla and Salix caprea had unimodal DBH distributions. One-sided interspecific competition was detected between some species combinations at the scale of the 5 ha study plot, and the competitive effect was mainly size-dependent rather than from species-specific interactions with large individuals in the canopy layer out competing smaller individuals in the understory. Symmetric competition was found between Q. liaotungensis and A. mono only. However, considering the straight line relationship of G ( t, x) - √{D(t, x)}, which suggests that competitive asymmetry is very low or absent, combined with the relatively low mortality of trees with a DBH larger than 4 cm, we speculate that asymmetric interspecific competition was not important in structuring this tree community. Regeneration characteristics of each species are most likely important in regulating species coexistence and stand dynamics in this forest.

When the diameter of the abdominal aorta should be considered as abnormal? A new ultrasonographic index using the wrist circumference as a body build reference

International Nuclear Information System (INIS)

Sconfienza, Luca Maria; Santagostino, Ilaria; Di Leo, Giovanni; Piazza, Raffaella; Gozzi, Gino; Trimarchi, Santi; Sardanelli, Francesco

2013-01-01

Purpose: To use US to evaluate the normal values of aortic diameter (AD), stratifying the population by age, gender and body build, as measured using wrist circumference (WC). Materials and methods: Between April 2010 and February 2012, consecutive patients ≥ 30 years of age, without history of abdominal aortic aneurysm (AAA) were prospectively enrolled. They underwent an abdominal ultrasonography for reasons other than aorta evaluation. AD was measured at the infrarenal (AD 1 ), intermediate (AD 2 ), and iliac bifurcation (AD 3 ) levels: a diameter ≥ 3 cm was considered as an aneurysm. The maximal aortic diameter (AD max ) was measured for AAA patients. WC was measured; AD/WC ratio was calculated and presented in percentage: the range of normal values was obtained excluding AAA cases and calculated as mean ± 1.96 × standard deviation. Pearson correlation coefficient was used. Results: We recruited 1200 patients, 15 (1.25%; age range = 64–86 years) had AAA. AD ranges of the other patients were: AD 1 = 0.74–1.84 cm, AD 2 = 0.78–1.85 cm, and AD 3 = 0.68–1.76 cm for females; AD 1 = 0.86–2.02 cm, AD 2 = 0.91–2.08 cm, and AD 3 = 0.84–1.95 cm for males. AD 2 /WC ratio of non-AAA patients range was 4–15%, with only one outlier at 18%, while AD max /WC ratio of AAA patients range was 15–35% (p 1 , r = 0.318, p 2 and r = 0.280, p 3 ). Conclusion: The definition of normal AD should consider body build. An AD 2 /WC ratio of 15% may be regarded as a threshold to differentiate AAA- from non-AAA patients. Patients with AD 2 /WC values comprised between 12% and 15% may be at risk for AAA

Possibilities of a Personal Laser Scanning System for Forest Mapping and Ecosystem Services

Science.gov (United States)

Liang, Xinlian; Kukko, Antero; Kaartinen, Harri; Hyyppä, Juha; Yu, Xiaowei; Jaakkola, Anttoni; Wang, Yunsheng

2014-01-01

A professional-quality, personal laser scanning (PLS) system for collecting tree attributes was demonstrated in this paper. The applied system, which is wearable by human operators, consists of a multi-constellation navigation system and an ultra-high-speed phase-shift laser scanner mounted on a rigid baseplate and consisting of a single sensor block. A multipass-corridor-mapping method was developed to process PLS data and a 2,000 m2 forest plot was utilized in the test. The tree stem detection accuracy was 82.6%; the root mean square error (RMSE) of the estimates of tree diameter at breast height (DBH) was 5.06 cm; the RMSE of the estimates of tree location was 0.38 m. The relative RMSE of the DBH estimates was 14.63%. The results showed, for the first time, the potential of the PLS system in mapping large forest plots. Further research on mapping accuracy in various forest conditions, data correction methods and multi-sensoral positioning techniques is needed. The utilization of this system in different applications, such as harvester operations, should also be explored. In addition to collecting tree-level and plot-level data for forest inventory, other possible applications of PLS for forest ecosystem services include mapping of canopy gaps, measuring leaf area index of large areas, documenting and visualizing forest routes feasible for recreation, hiking and berry and mushroom picking. PMID:24434879

FITOSSOCIOLOGIA DE FRAGMENTOS DE FLORESTA ESTACIONAL DECIDUAL NO ESTADO DE SANTA CATARINA – BRASIL

Directory of Open Access Journals (Sweden)

Lauri Amândio Schorn

2014-01-01

Full Text Available This study aimed to evaluate the species composition and structure of Seasonal Deciduous Forest in the southern Brazilian state of Santa Catarina, including the tree/shrub component and the natural regeneration. We also compared the floristic composition between the components and discussed about the conservation condition of forests. The study was based on sample plots established by the Floristic and Forest Inventory of Santa Catarina state. Tree/shrub component was sampled by 78 plots placed systematically with 4,000 m² of sample area each, were individuals with DBH (diameter at breast height ≥ 10 cm was measured. Regeneration (DBH 1.50 m was sampled in subplots of 100 m² each. Structure and diversity of sample plots were analyzed in both components; species were classified by their ecologic group. To test the association between components was made a Non-metric Multidimensional Scaling (NMSD and Mantel test. We sampled 245 species, among them 215 in the tree/shrub component (79 of them exclusive, 165 species in the natural regeneration (30 exclusive ones and 136 species common to the two components. The association between components was confirmed with NMSD and Mantel test (r = 0.34; p = 0.001. Species with major importance value were mostly early secondary species that emphasizes the consequences of long term exploitation and degradation of Seasonal Deciduous Forest in Santa Catarina.

Floristic aspects and diversity of regenerated arboreal species under a stand of Anadenanthera peregrina Speg.

Directory of Open Access Journals (Sweden)

Gutenberg de Almeida Nascimento

2009-06-01

Full Text Available This study was conducted at the campus of the Federal University of Lavras, Minas Gerais state, in an area of 7.56ha which in earlier times was planted with Anadenanthera peregrina. It aimed to describe the floristic composition of the site so asto provide a theoretical basis to assist future local management interventions. A total of 81 plots, each measuring 10x10m, wereallocated and arranged in such way as to cover as much apparent variation in the physiognomic gradient of the vegetation as possible.All individuals with DBH (diameter at breast height > 5.0 cm were recorded. Each individual had their DBH and height recorded.Diversity was assessed using Shannon, Pielou and Jentsen indices and compared to adjacent areas and to other areas with similarhistory of land use. The sampling procedure recorded 1,180 individuals, distributed among 25 families and 66 species. The familypresenting the largest number of recorded species was Fabaceae, with 16 species (24.24%. The genera presenting the greatest floristicrichness were Casearia, with four species, Machaerium and Rollinia, each with three species, and Anadenanthera, Tapirira, Cordia,Protium, Inga, Ocotea, Miconia, Cedrela and Myrcia, each with two species. The Shannon diversity index (H was 1.47 nats.ind-1,indicating that the local community has low species diversity.

Effects of competition and facilitation on species assemblage in two types of tropical cloud forest.

Directory of Open Access Journals (Sweden)

Wenxing Long

Full Text Available Competition and facilitation between tree individuals are two kinds of non-random processes influencing the structure and functioning of forest communities, but how these two plant-plant interactions change along gradient of resources or environments remains very much a matter of debate. We developed a null model to test the size-distance regression, and assessed the effects of competition and facilitation (including interspecific interactions, intraspecific interactions and overall species interactions on each adult tree species assemblage [diameter at breast height (dbh ≥5 cm] across two types of tropical cloud forest with different environmental and resource regimes. The null model test revealed that 17% to 27% tree species had positive dbh-distance correlations while 11% to 19% tree species showed negative dbh-distance correlations within these two forest types, indicating that both competition and facilitation processes existed during the community assembly. The importance of competition for heterospecific species, and the intensity of competition for both heterospecific and overall species increased from high to low resources for all the shared species spanning the two forests. The importance of facilitation for conspecific and overall species, as well as that the intensity of facilitation for both heterospecific and conspecific species increased with increasing low air temperature stress for all the shared species spanning the two forests. Our results show that both competition and facilitation processes simultaneously affect parts of species assemblage in the tropical cloud forests. Moreover, the fact that nearly 50% species assemblage is not detected with our approaches suggest that tree species in these tropical forest systems are assembled with multiple ecological processes, and that there is a need to explore the processes other than the two biotic interactions in further researches.

Preparation of 2-in.-diameter (001) β-Ga2O3 homoepitaxial wafers by halide vapor phase epitaxy

Science.gov (United States)

Thieu, Quang Tu; Wakimoto, Daiki; Koishikawa, Yuki; Sasaki, Kohei; Goto, Ken; Konishi, Keita; Murakami, Hisashi; Kuramata, Akito; Kumagai, Yoshinao; Yamakoshi, Shigenobu

2017-11-01

The homoepitaxial growth of thick β-Ga2O3 layers on 2-in.-diameter (001) wafers was demonstrated by halide vapor phase epitaxy. Growth rates of 3 to 4 µm/h were confirmed for growing intentionally Si-doped n-type layers. A homoepitaxial layer with an average thickness and carrier concentration of 10.9 µm and 2.7 × 1016 cm-3 showed standard deviations of 1.8 µm (16.5%) and 0.5 × 1016 cm-3 (19.7%), respectively. Ni Schottky barrier diodes fabricated directly on a 5.3-µm-thick homoepitaxial layer with a carrier concentration of 3.4 × 1016 cm-3 showed reasonable reverse and forward characteristics, i.e., breakdown voltages above 200 V and on-resistances of 3.8-7.7 mΩ cm2 at room temperature.

Controlling the diameters and field emission properties of vertically aligned carbon nanotubes synthesized by thermal chemical vapor deposition

International Nuclear Information System (INIS)

Choi, Sung Yool; Kang, Young Il; Cho, Kyoung Ik; Choi, Kyu Seok; Kim, Do Jin

2001-01-01

We report here the synthesis of vertically well-aligned carbon nanotubes and the effect of catalytic metal layer on the diameter of grown carbon nanotubes and the field emission characteristics of them, The carbon nanotubes were grown by thermal chemical vapor deposition at temperatures below 900 .deg. C on Fe metal catalytic layer, deposited by sputtering process on a Si substrate and pretreated by heat and NH 3 gas. We found that the thickness of metal layers could be an important parameter in controlling the diameters of carbon nanotubes. With varying the thickness of the metal layers the grain sizes of them also vary so that the diameters of the nanotubes could be controlled. Field emission measurement has been made on the carbon nanotube field emitters at room temperature in a vacuum chamber below 10 -6 Torr. Our vertically aligned carbon nanotube field emitter of the smallest diameter emits a current density about 10 mA/cm 2 at 7.2 V/μm. The field emission property of the carbon nanotubes shows strong dependence on the nanotube diameters as expected

Neutron spectra of /sup 242/Cm-Be and /sup 244/Cm-Be neutron sources

Energy Technology Data Exchange (ETDEWEB)

Kumar, A; Nagarajan, P S [Bhabha Atomic Research Centre, Bombay (India). Div. of Radiation Protection

1977-02-15

Neutron spectra of /sup 242/Cm-Be(..cap alpha..,n) and /sup 244/Cm-Be(..cap alpha..,n) sources have been calculated including the spontaneous fission contribution which is negligible for /sup 242/Cm and amounts to about 4% for /sup 244/Cm. The agreement of the present work with experimental results is poor.

Pocket Checklists of Indonesian timber trees

NARCIS (Netherlands)

Prawira, Soewanda A.; Tantra, I.G.M.; Whitmore, T.C.

1984-01-01

Indonesia as yet does not have a comprehensive account of the forest trees which reach timber size (35 cm dbh = 14 inch or 105 cm gbh = 42 inch). A project has been started in August 1983 by the Botany Section of the Forest Research Institute in Bogor, Indonesia, to prepare pocket checklists of the

Piezo-Operated Shutter Mechanism Moves 1.5 cm

Science.gov (United States)

Glaser, Robert; Bamford, Robert

2005-01-01

The figure shows parts of a shutter mechanism designed to satisfy a number of requirements specific to its original intended application as a component of an atomic clock to be flown in outer space. The mechanism may also be suitable for use in laboratory and industrial vacuum systems on Earth for which there are similar requirements. The requirements include the following: a) To alternately close, then open, a 1.5-cm-diameter optical aperture twice per second, with a stroke time of no more than 15 ms, during a total operational lifetime of at least a year; b) To attenuate light by a factor of at least 1012 when in the closed position; c) To generate little or no magnetic field; d) To be capable of withstanding bakeout at a temperature of 200 C to minimize outgassing during subsequent operation in an ultrahigh vacuum; and e) To fit within a diameter of 12 in. (=305 mm) a size limit dictated by the size of an associated magnetic shield. The light-attenuation requirement is satisfied by use of overlapping shutter blades. The closure of the aperture involves, among other things, insertion of a single shutter blade between a pair of shutter blades. The requirement to minimize the magnetic field is satisfied by use of piezoelectric actuators. Because piezoelectric actuators cannot withstand bakeout, they must be mounted outside the vacuum chamber, and, hence, motion must be transmitted from the actuators to the shutter levers via a vacuum-chamber-wall diaphragm.

Host heterogeneity influences the impact of a non-native disease invasion on populations of a foundation tree species

Science.gov (United States)

Jules, Erik S.; Carroll, Allyson L.; Garcia, Andrea M.; Steenbock, Christopher M.; Kauffman, Matthew J.

2014-01-01

Invasive pathogens are becoming increasingly important in forested ecosystems, yet they are often difficult to study because of their rapid transmission. The rate and extent of pathogen spread are thought to be partially controlled by variation in host characteristics, such as when host size and location influence susceptibility. Few host-pathogen systems, however, have been used to test this prediction. We used Port Orford cedar (Chamaecyparis lawsoniana), a foundation tree species in riparian areas of California and Oregon (USA), and the invasive oomycete Phytophthora lateralis to assess pathogen impacts and the role of host characteristics on invasion. Across three streams that had been infected for 13–18 years by P. lateralis, we mapped 2241 trees and determined whether they had been infected using dendrochronology. The infection probability of trees was governed by host size (diameter at breast height [DBH]) and geomorphic position (e.g., active channel, stream bank, floodplain, etc.) similarly across streams. For instance, only 23% of trees <20 cm DBH were infected, while 69% of trees ≥20 cm DBH were infected. Presumably, because spores of P. lateralis are transported downstream in water, they are more likely to encounter well-developed root systems of larger trees. Also because of this water-transport of spores, differences in infection probability were found across the geomorphic positions: 59% of cedar in the active channel and the stream bank (combined) were infected, while 23% of trees found on higher geomorphic types were infected. Overall, 32% of cedar had been infected across the three streams. However, 63% of the total cedar basal area had been killed, because the greatest number of trees, and the largest trees, were found in the most susceptible positions. In the active channel and stream bank, 91% of the basal area was infected, while 46% was infected across higher geomorphic positions. The invasion of Port Orford cedar populations by

Higher stability in forest-atmosphere exchange observed in a structurally diverse forest.

Science.gov (United States)

Tamrakar, R.; Rayment, M.; Moyano, F.; Herbst, M.; Mund, M.; Knohl, A.

2016-12-01

We tested the hypothesis that structurally diverse forests have greater stability on exchange processes with the atmosphere compared to forests with less diverse structure. In a case study, we assessed how net ecosystem exchange (NEE) and normalized maximum assimilation (Amax) varied over time in two forests in Germany based on 11 years of continuous eddy flux measurements. The two sites differ in structure as well as in species composition: one (Hainich) is an unmanaged, uneven-aged and heterogeneous mixed beech forest (65% beech), the other (Leinefelde) is a managed, even-aged and homogeneous pure beech stand. The two selected forests are of similar mean ages (about 130 years old) and exposed to similar air temperatures and vapour pressure deficits. Even though Hainich (the unmanaged forest) received higher rainfall (720 ± 134 mm vs 599±166 mm), the soil water availability showed no significant difference between both sites. Based on detailed biomass inventory, trees in Hainich are well distributed in all diameter at breast height (dbh) classes (10 to 90cm dbh) whereas in Leinefelde (the managed forest) trees are mostly confined to dbh classes of 40 to 55 cm. Our results showed a strong difference in inter-annual variability of NEE, which was lower in the unmanaged than in the managed site (coefficient of variation (CV) of 0.13 and 0.27, respectively). The lowest NEE was observed in both sites in 2004, a mast year and a year after the strong summer drought of 2003. The variation in the inter-annual normalized maximum assimilation (Amax) was lower in Hainich (standard deviation of 2.5 compared to 3.9 µmol m-2 s-1). Also, the seasonal course of Amax differed between the two forests which could explain why the mixed forest was more affected by the late summer drought of 2003, despite showing a more conservative carbon budget than the pure stand in the long term. The interannual anomaly in Amax was correlated with fruit production, the latter being larger in

Accumulation of logging residue in first thinnings of Scots pine and Norway spruce. Impact of top bucking diameter of roundwood

Energy Technology Data Exchange (ETDEWEB)

Raeisaenen, T.; Nurmi, J. (Finnish Forest Research Inst., Kannus (Finland)), e-mail: tommi.raisanen@metla.fi

2010-07-01

The aim of this study was to examine the impacts of changes in the minimum top diameter of roundwood on the accumulation of logging residue. The aim was also to compare estimates of residue accumulation calculated by tree-specific biomass models with field measurements from thinnings. Felling experiments were performed in first thinnings of pine and spruce to evaluate the model calculations. In the felling, mean relative masses of the tree tops of spruce were nearly doubled with each increment of 2 cm in the top diameter. Respectively in pine, the mean relative tree top mass was increased by 50-60 % when the top diameter was increased by 2 cm. The mass of total residue (tree top and all delimbed branches) was similarly increased, but the differences were not as large. Compared to pine, a lesser variation in the crown mass of the spruce sample resulted in a more accurate model prediction of masses of tree tops and total residue. The results indicate that the residue accumulation from a small group of trees cannot be predicted very reliably, but when a larger tree population or area is considered, the model predictions are enhanced to a more practicable level. (orig.)

Development and analysis of SRIC harvesting systems

Energy Technology Data Exchange (ETDEWEB)

Stokes, B.J. [Southern Forest Experiment Station, Auburn, AL (United States); Hartsough, B.R. [Univ. of California, Davis, CA (United States)

1993-12-31

This paper reviews several machine combinations for harvesting short-rotation, intensive-culture (SRIC) plantations. Productivity and cost information for individual machines was obtained from published sources. Three felling and skidding systems were analyzed for two stands, a 7.6-cm (3-in) average d.b.h. sycamore and a 15.2-cm (6-in) average d.b.h. eucalyptus. The analyses assumed that whole trees were chipped at roadside. Costs and production were summarized for each system. The systems were: (1) Continuous-travel feller-buncher, skidder, and chipper; (2) 3-wheel feller-buncher, skidder, and chipper; (3) chainsaw, skidder, and chipper. In the 7.6-cm stand, system productivities were 9.9, 7.3, and 7.5 BDLT/SMH, and costs were $20.9, $20.8, and $18.0 per BDLT for the three systems, respectively. System production rates for the 15.2-cm stand were 24.3, 10.2, and 12.5 BDLT/SMH, and costs were $8.7, $10.9, and $13.2 for systems 1, 2 and 3, respectively.

An Ecological Comparison of Floristic Composition in Seasonal Semideciduous Forest in Southeast Brazil: Implications for Conservation

Directory of Open Access Journals (Sweden)

Sérgio de Faria Lopes

2012-01-01

Full Text Available We examined floristic patterns of ten seasonal semideciduous forest sites in southeastern Brazil and conducted a central sampling of one hectare for each site, where we took samples and identified all individual living trees with DBH (diameter at breast height, 1.30 m ≥4.8 cm. Arboreal flora totaled 242 species, 163 genera, and 58 families. Fabaceae (38 species and Myrtaceae (20 species were families with the largest number of species. Only Copaifera langsdorffii and Hymenaea courbaril occurred at all sites. Multivariate analysis (detrended correspondence analysis and cluster analysis using two-way indicator species analysis (TWINSPAN indicated the formation of a group containing seven fragments in which Siparuna guianensis was the indicator species. This analysis revealed that similarities between studied fragments were due mainly to the successional stage of the community.

FLORULA URBAN FRAGMENT OF TROPICAL DRY FOREST

Directory of Open Access Journals (Sweden)

Willington Barranco-Pérez

2016-01-01

Full Text Available The aim of this study was to record the composition of plant species in an urban fragment of tropical dry forest of secondary regeneration (bs-T to generate information that can be used in the planning and management of green spaces in the city of Santa Marta. Transects of 2 x 50 m were established equivalent to 0.1 ha and all species were counted >1.0 cm DBH (Diameter at Breast Height: 1.3m. 100 species of angiosperms were recorded of which 47% have herbaceous habit. The number of species recorded in this study represents 39.6% of the species reported for the hills of Santa Marta and 3.8% for the dry forests of Colombia. It is suggested to isolate this type of secondary formations of any intervention and contemplate the reintroduction of individuals and conservation strategies.

Diameter-speed relation of sprite streamers

International Nuclear Information System (INIS)

Kanmae, T; Stenbaek-Nielsen, H C; McHarg, M G; Haaland, R K

2012-01-01

Propagation and splitting of sprite streamers has been observed at high temporal and spatial resolution using two intensified high-speed CMOS cameras recording at 10 000 and 16 000 frames per second. Concurrent video recordings from a remote site provided data for triangulation allowing us to determine accurate altitude scales for the sprites. Diameters and speeds of the sprite streamers were measured from the high-speed images, and the diameters were scaled to the reduced diameters based on the triangulated locations. The sprite streamers with larger reduced diameter move faster than those with smaller diameter; the relation between the reduced diameter and speed is roughly linear. The reduced diameters at ≈65-70 km altitude are larger than streamer diameters measured at ground pressure in laboratory discharges indicating a deviation from the similarity law possibly due to the effects of the photoionization and an expansion of the streamer head along its propagation over a long distance. The reduced diameter and speed of the sprite streamers agree well with the diameter-velocity relation proposed by Naidis (2009 Phys. Rev. E 79 057401), and the peak electric field of the sprite streamers is estimated to be approximately 3-5 times the breakdown threshold field. (paper)

STRUCTURE, COMPOSITION AND USE OF TREES OF THE DECIDUOUS FOREST IN APATZINGAN, MICHOACAN

Directory of Open Access Journals (Sweden)

F. Casanova-Lugo

2014-08-01

Full Text Available The aim of this study was to determine the structure, composition and use of trees and shrubs of tropical deciduous forest in the mountains of Apatzingán, Michoacan. For this, six sampling units were established and each 7 sub-plots (squares of 10 × 10 m were delineated. A floristic inventory was conducted and diameter at breast height (DBH, total height (TH, crown diameter (CD, (BA basal area and the importance value index (IVI was determined. Further, based on local knowledge the use of each species found was determined. The results show that 97.1 % of species having a DAP ≤ 10 cm. Over 90% of the sampled trees had a DC ≤ 4 m. 84.4 % of the sampled individuals had an AT ≤ 6 m, and 85 % of species had an AB ≤ 30 cm2. The species most IVI were Cordia elaeagnoides, Randia watsoni, Apoplanesia paniculate, Caesalpinia platyloba, Capparis asperifolia and Triunfetta sp. 38% of the sampled species belong to the legume family and almost 80% of the sampled species has forage use. We conclude that local knowledge of the species of deciduous forest can help establish the basis for designing new proposals to the use and conservation of local resources and generate resilient livestock production systems. Â

Total tree, merchantable stem and branch volume models for ...

African Journals Online (AJOL)

Total tree, merchantable stem and branch volume models for miombo woodlands of Malawi. Daud J Kachamba, Tron Eid. Abstract. The objective of this study was to develop general (multispecies) models for prediction of total tree, merchantable stem and branch volume including options with diameter at breast height (dbh) ...

Micro-environmental changes induced by shape and size of forest openings: effects on Austrocedrus chilensis and Nothofagus dombeyi seedlings performance in a Pinus contorta plantation of Patagonia, Argentina

Energy Technology Data Exchange (ETDEWEB)

Pafundi, L.; Urretavizcaya, M.F.; Defosse, G.E.

2016-07-01

Aim of the study: to analyze, within a Pinus contorta plantation, the effects of artificially created small rectangular and small medium circular canopy gaps on: i) photosynthetic active radiation (PAR), and soil temperature and moisture, and ii) survival and growth of planted Austrocedrus chilensis and Nothofagus dombeyi seedlings, species which formerly composed the natural forest of the area. Study area: A 2 ha stand of a Pinus contorta stand in Los Alerces National Park, Argentina (42°43’S, 71°43’W, 490 m.a.s.l.). Material and methods: The Pinus contorta stand was 25 yr old, 22 m height and 26 cm DBH, presenting 1000 trees ha-1 of density and 53 m2 ha-1 of basal area. In 2009, rectangular and circular gaps were created within the stand and then seedlings were planted. During two growing seasons (2010-2011 and 2011-2012), PAR, soil temperature and moisture were measured in gaps and understory (control), and seedling survival and growth in gaps. Main results: During both seasons, soil temperature did not differ among gaps and control, whereas PAR and soil moisture were lower in control than in gaps. Seedling survival was high in all gaps regardless of species and season. Seedlings showed higher diameter growth in rectangular than in circular gaps. Research highlights: Austrocedrus chilensis and N. dombeyi seedlings survival is high and their growth slightly affected, when planted in differently-sized canopy gaps within a Pinus contorta plantation in Patagonia. However, other gap sizes and stand densities should be tested before recommending which one shows better results for reconverting monocultures into former native forests. Abbreviations used: PAR (Photosynthetic Active Radiation); DBH (Diameter at Breast Height); INTA (Argentinean Institute of Agricultural Technology); IFONA (Argentinean Forest Institute). (Author)

Allometry of Sapwood Depth in Five Boreal Trees

Directory of Open Access Journals (Sweden)

M. Rebeca Quiñonez-Piñón

2017-11-01

Full Text Available This paper analyzes sapwood variability and allometry within individuals of Populus tremuloides, Pinus contorta, Pinus banksiana, Picea mariana, and Picea glauca. Outside bark diameter at breast height (DBH and sapwood depth (sd in four cardinal directions were measured in individuals in stands in Alberta and Saskatchewan, Canada. The microscopical analysis of wood anatomy was used to measure sd, and the error associated with the measures was observed. Sapwood allometry analyses examined the influence of DBH on sd and on sapwood area (SA. All species were observed to have varying sapwood depths around the trunk with statistical analyses showing that Pinus banksiana has a well defined preference to grow thicker in the North-East side. The largest sd values were observed for the Populus tremuloides set. Unlike Populus tremuloides and Picea glauca, for the species Pinus contorta, Pinus banksiana, and Picea mariana, incremental growth in DBH does not directly drive sapwood growth in any direction. For these three species, SA increases only because of increases in DBH as sd remains nearly constant. These results show that sapwood depth and sapwood area seem to behave differently in each studied species and are not always proportional to the tree size as is normally assumed.

Separation and recovery of Cm from Cm-Pu mixed oxide samples containing Am impurity

International Nuclear Information System (INIS)

Hirokazu Hayashi; Hiromichi Hagiya; Mitsuo Akabori; Yasuji Morita; Kazuo Minato

2013-01-01

Curium was separated and recovered as an oxalate from a Cm-Pu mixed oxide which had been a 244 Cm oxide sample prepared more than 40 years ago and the ratio of 244 Cm to 240 Pu was estimated to 0.2:0.8. Radiochemical analyses of the solution prepared by dissolving the Cm-Pu mixed oxide in nitric acid revealed that the oxide contained about 1 at% of 243 Am impurity. To obtain high purity curium solution, plutonium and americium were removed from the solution by an anion exchange method and by chromatographic separation using tertiary pyridine resin embedded in silica beads with nitric acid/methanol mixed solution, respectively. Curium oxalate, a precursor compound of curium oxide, was prepared from the purified curium solution. 11.9 mg of Cm oxalate having some amounts of impurities, which are 243 Am (5.4 at%) and 240 Pu (0.3 at%) was obtained without Am removal procedure. Meanwhile, 12.0 mg of Cm oxalate (99.8 at% over actinides) was obtained with the procedure including Am removals. Both of the obtained Cm oxalate sample were supplied for the syntheses and measurements of the thermochemical properties of curium compounds. (author)

344 cm x 86 cm low mass vacuum window

International Nuclear Information System (INIS)

Reimers, R.M.; Porter, J.; Meneghetti, J.; Wilde, S.; Miller, R.

1983-08-01

The LBL Heavy Ion Spectrometer System (HISS) superconducting magnet contains a 1 m x 3.45 m x 2 m vacuum tank in its gap. A full aperture thin window was needed to minimize background as the products of nuclear collisions move from upstream targets to downstream detectors. Six windows were built and tested in the development process. The final window's unsupported area is 3m 2 with a 25 cm inward deflection. The design consists of a .11 mm Nylon/aluminum/polypropylene laminate as a gas seal and .55 mm woven aramid fiber for strength. Total mass is 80 milligrams per cm 2 . Development depended heavily on past experience and testing. Safety considerations are discussed

Complex Spatial Structure in a Population of Didymopanax pittieri, A Tree of Wind-Exposed Lower Montane Rain Forest

Science.gov (United States)

Lawton, Robert M.; Lawton, Robert O.

2010-01-01

Didymopanax pittieri is a common shade-intolerant tree colonizing treefall gaps in the elfin forests on windswept ridgecrests in the lower montane rain forests of the Cordillera de Tilarain, Costa Rica. All D. pittieri taller than > 0.5 m in a 5.2-ha elfin forested portion of a gridded study watershed in the Monteverde Cloud Forest Preserve were located, mapped, and measured. This local population of D. pittieri is spatially inhomogeneous, in that density increases with increasing wind exposure; D. pittieri are more abundant near ridge crests than lower on windward slopes. The important and ubiquitous phenomenon of spatial inhomogeneity in population density is addressed and corrected for in spatial analyses by the application of the inhomogeneous version of Ripley's K. The spatial patterns of four size classes of D. pittieri ( 20 cm dbh) were investigated. Within the large-scale trend in density driven by wind exposure, D. pittieri saplings are clumped at the scale of treefall gaps and at the scale of patches of aggregated gaps. D. pittieri 5-10 cm dbh are randomly distributed, apparently due to competitive thinning of sapling clumps during the early stages of gap-phase regeneration. D. pittieri larger than 10 cm dbh are overdispersed at a scale larger than that of patches of gaps. Natural disturbance can influence the distribution of shade intolerant tree populations at several different spatial scales, and can have discordant effects at different life history stages.

Trends in Genetic and Environmental Parameters for Height, Diameter, and Volume in a Multilocation Clonal Study with Loblolly Pine

Science.gov (United States)

A.D. Paul; G. Sam Foster; T. Caldwell; J. McRae

1997-01-01

Seedlings from 30 full-sib families (contained in 2,4 x 4 factorials) of loblollynine(Pinus taeda L.) were cloned and planted in three test sites in Georgia. Analyses were conducted on total height at ages 1 to 5 yr in the field, dbh at age 5, and individual tree volume at age 5. Four sources of genetic control were tested: male parent, female parent, male x female...

Individual tree size inequality enhances aboveground biomass in homegarden agroforestry systems in the dry zone of Sri Lanka.

Science.gov (United States)

Ali, Arshad; Mattsson, Eskil

2017-01-01

Individual tree size variation, which is generally quantified by variances in tree diameter at breast height (DBH) and height in isolation or conjunction, plays a central role in ecosystem functioning in both controlled and natural environments, including forests. However, none of the studies have been conducted in homegarden agroforestry systems. In this study, aboveground biomass, stand quality, cation exchange capacity (CEC), DBH variation, and species diversity were determined across 45 homegardens in the dry zone of Sri Lanka. We employed structural equation modeling (SEM) to test for the direct and indirect effects of stand quality and CEC, via tree size inequality and species diversity, on aboveground biomass. The SEM accounted for 26, 8, and 1% of the variation in aboveground biomass, species diversity and DBH variation, respectively. DBH variation had the strongest positive direct effect on aboveground biomass (β=0.49), followed by the non-significant direct effect of species diversity (β=0.17), stand quality (β=0.17) and CEC (β=-0.05). There were non-significant direct effects of CEC and stand quality on DBH variation and species diversity. Stand quality and CEC had also non-significant indirect effects, via DBH variation and species diversity, on aboveground biomass. Our study revealed that aboveground biomass substantially increased with individual tree size variation only, which supports the niche complementarity mechanism. However, aboveground biomass was not considerably increased with species diversity, stand quality and soil fertility, which might be attributable to the adaptation of certain productive species to the local site conditions. Stand structure shaped by few productive species or independent of species diversity is a main determinant for the variation in aboveground biomass in the studied homegardens. Maintaining stand structure through management practices could be an effective approach for enhancing aboveground biomass in these dry

Estimation and mapping of above ground biomass and carbon of ...

African Journals Online (AJOL)

In addition, field data from 35 sample plots comprising of the Diameter at Breast Height (DBH), co-ordinates of centroids and angles to the top and bottom of the individual trees was used for the analysis. The relationship between biomass and radar backscatter for selected sample plots was established using pairwise ...

Structure and Regeneration Status of Gedo Dry Evergreen Montane ...

African Journals Online (AJOL)

This study was conducted on Gedo Dry Evergreen Montane Forest in West Shewa Zone of Oromia National Regional State, 182-196 km west of Addis Ababa (Finfinne). The objective of the study was to determine structure and regeneration status of Gedo Forest. All trees and shrubs with Diameter at Breast Height (DBH) ...

Simulation of 1.5-mm-thick and 15-cm-diameter gated silicon drift X-ray detector operated with a single high-voltage source

Science.gov (United States)

Matsuura, Hideharu

2015-04-01

High-resolution silicon X-ray detectors with a large active area are required for effectively detecting traces of hazardous elements in food and soil through the measurement of the energies and counts of X-ray fluorescence photons radially emitted from these elements. The thicknesses and areas of commercial silicon drift detectors (SDDs) are up to 0.5 mm and 1.5 cm2, respectively. We describe 1.5-mm-thick gated SDDs (GSDDs) that can detect photons with energies up to 50 keV. We simulated the electric potential distributions in GSDDs with a Si thickness of 1.5 mm and areas from 0.18 to 168 cm2 at a single high reverse bias. The area of a GSDD could be enlarged simply by increasing all the gate widths by the same multiple, and the capacitance of the GSDD remained small and its X-ray count rate remained high.

Using Field Data and GIS-Derived Variables to Model Occurrence of Williamson's Sapsucker Nesting Habitat at Multiple Spatial Scales.

Directory of Open Access Journals (Sweden)

Mark C Drever

Full Text Available Williamson's sapsucker (Sphyrapicus thyroideus is a migratory woodpecker that breeds in mixed coniferous forests in western North America. In Canada, the range of this woodpecker is restricted to three small populations in southern British Columbia, precipitating a national listing as 'Endangered' in 2005, and the need to characterize critical habitat for its survival and recovery. We compared habitat attributes between Williamson's sapsucker nest territories and random points without nests or detections of this sapsucker as part of a resource selection analysis to identify the habitat features that best explain the probability of nest occurrence in two separate geographic regions in British Columbia. We compared the relative explanatory power of generalized linear models based on field-derived and Geographic Information System (GIS data within both a 225 m and 800 m radius of a nest or random point. The model based on field-derived variables explained the most variation in nest occurrence in the Okanagan-East Kootenay Region, whereas nest occurrence was best explained by GIS information at the 800 m scale in the Western Region. Probability of nest occurrence was strongly tied to densities of potential nest trees, which included open forests with very large (diameter at breast height, DBH, ≥57.5 cm western larch (Larix occidentalis trees in the Okanagan-East Kootenay Region, and very large ponderosa pine (Pinus ponderosa and large (DBH 17.5-57.5 cm trembling aspen (Populus tremuloides trees in the Western Region. Our results have the potential to guide identification and protection of critical habitat as required by the Species at Risk Act in Canada, and to better manage Williamson's sapsucker habitat overall in North America. In particular, management should focus on the maintenance and recruitment of very large western larch and ponderosa pine trees.

Using Field Data and GIS-Derived Variables to Model Occurrence of Williamson's Sapsucker Nesting Habitat at Multiple Spatial Scales.

Science.gov (United States)

Drever, Mark C; Gyug, Les W; Nielsen, Jennifer; Stuart-Smith, A Kari; Ohanjanian, I Penny; Martin, Kathy

2015-01-01

Williamson's sapsucker (Sphyrapicus thyroideus) is a migratory woodpecker that breeds in mixed coniferous forests in western North America. In Canada, the range of this woodpecker is restricted to three small populations in southern British Columbia, precipitating a national listing as 'Endangered' in 2005, and the need to characterize critical habitat for its survival and recovery. We compared habitat attributes between Williamson's sapsucker nest territories and random points without nests or detections of this sapsucker as part of a resource selection analysis to identify the habitat features that best explain the probability of nest occurrence in two separate geographic regions in British Columbia. We compared the relative explanatory power of generalized linear models based on field-derived and Geographic Information System (GIS) data within both a 225 m and 800 m radius of a nest or random point. The model based on field-derived variables explained the most variation in nest occurrence in the Okanagan-East Kootenay Region, whereas nest occurrence was best explained by GIS information at the 800 m scale in the Western Region. Probability of nest occurrence was strongly tied to densities of potential nest trees, which included open forests with very large (diameter at breast height, DBH, ≥57.5 cm) western larch (Larix occidentalis) trees in the Okanagan-East Kootenay Region, and very large ponderosa pine (Pinus ponderosa) and large (DBH 17.5-57.5 cm) trembling aspen (Populus tremuloides) trees in the Western Region. Our results have the potential to guide identification and protection of critical habitat as required by the Species at Risk Act in Canada, and to better manage Williamson's sapsucker habitat overall in North America. In particular, management should focus on the maintenance and recruitment of very large western larch and ponderosa pine trees.

Effects of experimental fuel additions on fire intensity and severity: unexpected carbon resilience of a neotropical forest.

Science.gov (United States)

Brando, Paulo M; Oliveria-Santos, Claudinei; Rocha, Wanderley; Cury, Roberta; Coe, Michael T

2016-07-01

Global changes and associated droughts, heat waves, logging activities, and forest fragmentation may intensify fires in Amazonia by altering forest microclimate and fuel dynamics. To isolate the effects of fuel loads on fire behavior and fire-induced changes in forest carbon cycling, we manipulated fine fuel loads in a fire experiment located in southeast Amazonia. We predicted that a 50% increase in fine fuel loads would disproportionally increase fire intensity and severity (i.e., tree mortality and losses in carbon stocks) due to multiplicative effects of fine fuel loads on the rate of fire spread, fuel consumption, and burned area. The experiment followed a fully replicated randomized block design (N = 6) comprised of unburned control plots and burned plots that were treated with and without fine fuel additions. The fuel addition treatment significantly increased burned area (+22%) and consequently canopy openness (+10%), fine fuel combustion (+5%), and mortality of individuals ≥5 cm in diameter at breast height (dbh; +37%). Surprisingly, we observed nonsignificant effects of the fuel addition treatment on fireline intensity, and no significant differences among the three treatments for (i) mortality of large trees (≥30 cm dbh), (ii) aboveground forest carbon stocks, and (iii) soil respiration. It was also surprising that postfire tree growth and wood increment were higher in the burned plots treated with fuels than in the unburned control. These results suggest that (i) fine fuel load accumulation increases the likelihood of larger understory fires and (ii) single, low-intensity fires weakly influence carbon cycling of this primary neotropical forest, although delayed postfire mortality of large trees may lower carbon stocks over the long term. Overall, our findings indicate that increased fine fuel loads alone are unlikely to create threshold conditions for high-intensity, catastrophic fires during nondrought years. © 2016 John Wiley & Sons Ltd.

Maximum Diameter Measurements of Aortic Aneurysms on Axial CT Images After Endovascular Aneurysm Repair: Sufficient for Follow-up?

International Nuclear Information System (INIS)

Baumueller, Stephan; Nguyen, Thi Dan Linh; Goetti, Robert Paul; Lachat, Mario; Seifert, Burkhardt; Pfammatter, Thomas; Frauenfelder, Thomas

2011-01-01

Purpose: To assess the accuracy of maximum diameter measurements of aortic aneurysms after endovascular aneurysm repair (EVAR) on axial computed tomographic (CT) images in comparison to maximum diameter measurements perpendicular to the intravascular centerline for follow-up by using three-dimensional (3D) volume measurements as the reference standard. Materials and Methods: Forty-nine consecutive patients (73 ± 7.5 years, range 51–88 years), who underwent EVAR of an infrarenal aortic aneurysm were retrospectively included. Two blinded readers twice independently measured the maximum aneurysm diameter on axial CT images performed at discharge, and at 1 and 2 years after intervention. The maximum diameter perpendicular to the centerline was automatically measured. Volumes of the aortic aneurysms were calculated by dedicated semiautomated 3D segmentation software (3surgery, 3mensio, the Netherlands). Changes in diameter of 0.5 cm and in volume of 10% were considered clinically significant. Intra- and interobserver agreements were calculated by intraclass correlations (ICC) in a random effects analysis of variance. The two unidimensional measurement methods were correlated to the reference standard. Results: Intra- and interobserver agreements for maximum aneurysm diameter measurements were excellent (ICC = 0.98 and ICC = 0.96, respectively). There was an excellent correlation between maximum aneurysm diameters measured on axial CT images and 3D volume measurements (r = 0.93, P < 0.001) as well as between maximum diameter measurements perpendicular to the centerline and 3D volume measurements (r = 0.93, P < 0.001). Conclusion: Measurements of maximum aneurysm diameters on axial CT images are an accurate, reliable, and robust method for follow-up after EVAR and can be used in daily routine.

Effect of Heating/Hydratation on Compacted Bentonite: Tests in 60-cm Long Cells

Energy Technology Data Exchange (ETDEWEB)

Villar, M. V.; Fernandez, A. M.; Martin, P. L.; Barcala, J. M.; Gomez-Espina, R.; Rivas, P.

2008-07-01

The conditions of the bentonite in an engineered barrier for high-level radioactive waste disposal have been simulated in a series of tests. Cylindrical cells with an inner length of 60 cm and a diameter of 7 cm were constructed. Inside the cells, blocks of compacted FEBEX bentonite were put one on top of the other. the bottom surface of the material was heated at 100 degree centigree and the top surface was injected with granitic water. the duration of the tests was 0.5, 1,2 and 7,6 years. The temperatures and water intake were measured during the tests and, at the end, the cells were dismounted and the dry density, water content, mineralogy, geochemistry and some hydro-mechanical properties of the clay (permeability, swelling) were measured at different positions. the values obtained are compared among them and to those of the untreated FEBEX bentonite. The study has run over for 10 years in the context of the projects FEBEX I and II and NF-PRO. (Author) 50 refs.

Effect of Heating/Hydratation on Compacted Bentonite: Tests in 60-cm Long Cells

International Nuclear Information System (INIS)

Villar, M. V.; Fernandez, A. M.; Martin, P. L.; Barcala, J. M.; Gomez-Espina, R.; Rivas, P.

2008-01-01

The conditions of the bentonite in an engineered barrier for high-level radioactive waste disposal have been simulated in a series of tests. Cylindrical cells with an inner length of 60 cm and a diameter of 7 cm were constructed. Inside the cells, blocks of compacted FEBEX bentonite were put one on top of the other. the bottom surface of the material was heated at 100 degree centigree and the top surface was injected with granitic water. the duration of the tests was 0.5, 1,2 and 7,6 years. The temperatures and water intake were measured during the tests and, at the end, the cells were dismounted and the dry density, water content, mineralogy, geochemistry and some hydro-mechanical properties of the clay (permeability, swelling) were measured at different positions. the values obtained are compared among them and to those of the untreated FEBEX bentonite. The study has run over for 10 years in the context of the projects FEBEX I and II and NF-PRO. (Author) 50 refs

Development of allometric relations for three mangrove species in South Florida for use in the Greater Everglades Ecosystem restoration

Science.gov (United States)

Smith, T. J.; Whelan, K.R.T.

2006-01-01

Mathematical relations that use easily measured variables to predict difficult-to-measure variables are important to resource managers. In this paper we develop allometric relations to predict total aboveground biomass and individual components of biomass (e.g., leaves, stems, branches) for three species of mangroves for Everglades National Park, Florida, USA. The Greater Everglades Ecosystem is currently the subject of a 7.8-billion-dollar restoration program sponsored by federal, state, and local agencies. Biomass and production of mangroves are being used as a measure of restoration success. A technique for rapid determination of biomass over large areas is required. We felled 32 mangrove trees and separated each plant into leaves, stems, branches, and for Rhizophora mangle L., prop roots. Wet weights were measured in the field and subsamples returned to the laboratory for determination of wet-to-dry weight conversion factors. The diameter at breast height (DBH) and stem height were also measured. Allometric equations were developed for each species for total biomass and components of biomass. We compared our equations with those from the same, or similar, species from elsewhere in the world. Our equations explained ???93% of the variance in total dry weight using DBH. DBH is a better predictor of dry weight than is stem height and DBH is much easier to measure. Furthermore, our results indicate that there are biogeographic differences in allometric relations between regions. For a given DBH, stems of all three species have less mass in Florida than stems from elsewhere in the world. ?? Springer 2006.

The Relationship amongst Intervertebral Disc Vertical Diameter, Lateral Foramen Diameter and Nerve Root Impingement in Lumbar Vertebra

Directory of Open Access Journals (Sweden)

Yusof MI

2018-03-01

Full Text Available Introduction: The vertical diameter of the foramen is dependent upon the vertical diameter of the corresponding intervertebral disc. A decrease in disc vertical diameter has direct anatomic consequences to the foraminal diameter and area available for the nerve root passing through it. This study is to establish the relationship amongst the intervertebral disc vertical diameter, lateral foramen diameters and nerve root compression in the lumbar vertebra. Materials and Methods: Measurements of the study parameters were performed using sagittal MRI images. The parameters studied were: intervertebral disc vertical diameter (DVD, foraminal vertical diameter (FVD, foraminal transverse diameter (FTD and nerve root diameter (NRD of both sides. The relationship between the measured parameters were then analyzed. Results: A total of 62 MRI images were available for this study. Statistical analysis showed moderate to strong correlation between DVD and FVD at all the lumbar levels except at left L23 and L5S1 and right L3L4 and L4L5. Correlation between DVD and FTD were not significant at all lumbar levels. Regression analysis showed that a decrease of 1mm of DVD was associated with 1.3, 1.7, 3.3, 3.3 and 1.3mm reduction of FVD at L1L2, L2L3, L3L4, L4L5 and L5S1 respectively. Conclusion: Reduction of DVD was associated with reduction of FVD. However, FVD was relatively wide for the nerve root even with complete loss of DVD. FTD was much narrower than the FVD making it more likely to cause nerve root compression at the exit foramina. These anatomical details should be given consideration in treating patients with lateral canal stenosis.

Validity of using modified capillary column with larger diameter to study the Cs diffusion in local Taiwan laterite

International Nuclear Information System (INIS)

Tsing-Hai Wang; National Tsing Hua University, Hsinchu, Taiwan; Wen-Chun Yeh; Shih-Chin Tsai; Yi-Lin Jan; Shi-Ping Teng

2008-01-01

We have examined the working diameter of capillary columns with diameter of 5, 7, 10 and 20 mm. These modified capillary columns were carefully filled with local Taiwan laterite (LTL). The porosity and density of these packed columns was 0.51±0.02 g/g and 1.27±0.05 g/cm 3 , respectively. The diffusion experiments were then carried out in synthetic groundwater with Cs loading of 0.1mM at room temperature. Experimental results have shown that the diffusion profiles of modified capillary columns fit Fick's second law very well. This result revealed that the working diameter of a capillary column can be expanded to at least to 20 mm without affecting the validity of the derived diffusion coefficients. Among these columns, the ones with 5 mm diameter show the most consistent results of the derived K d , apparent and effective diffusion coefficients. Although the derived distribution and effective diffusion coefficients slightly decrease as the diameter of these columns increases due to the increase of the solid/liquid ratio. These values are still informative of the Cs diffusion in local Taiwan laterite. Moreover, our results clearly demonstrate the potential of using 'modified capillary method' to study the diffusion behaviors of concerned radionuclide because columns with large diameter enable the filling with more versatile geological substances. (author)

Effects of Diameter on Initial Stiffness of P-Y Curves for Large-Diameter Piles in Sand

DEFF Research Database (Denmark)

Sørensen, Søren Peder Hyldal; Ibsen, Lars Bo; Augustesen, Anders Hust

2010-01-01

is developed for slender piles with diameters up to approximately 2.0 m. Hence, the method is not validated for piles with diameters of 4–6 m. The aim of the paper is to extend the p-y curve method to large-diameter non-slender piles in sand by considering the effects of the pile diameter on the soil-pile...... interaction. Hence, a modified expression for the p-y curves for statically loaded piles in sand is proposed in which the initial slope of the p-y curves depends on the depth below the soil surface, the pile diameter and the internal angle of friction. The evaluation is based on three-dimensional numerical...... analyses by means of the commercial program FLAC3D incorporating a Mohr-Coulomb failure criterion. The numerical model is validated with laboratory tests in a pressure tank at Aalborg University....

Possibilities of a Personal Laser Scanning System for Forest Mapping and Ecosystem Services

Directory of Open Access Journals (Sweden)

Xinlian Liang

2014-01-01

Full Text Available A professional-quality, personal laser scanning (PLS system for collecting tree attributes was demonstrated in this paper. The applied system, which is wearable by human operators, consists of a multi-constellation navigation system and an ultra-high-speed phase-shift laser scanner mounted on a rigid baseplate and consisting of a single sensor block. A multipass-corridor-mapping method was developed to process PLS data and a 2,000 m2 forest plot was utilized in the test. The tree stem detection accuracy was 82.6%; the root mean square error (RMSE of the estimates of tree diameter at breast height (DBH was 5.06 cm; the RMSE of the estimates of tree location was 0.38 m. The relative RMSE of the DBH estimates was 14.63%. The results showed, for the first time, the potential of the PLS system in mapping large forest plots. Further research on mapping accuracy in various forest conditions, data correction methods and multi-sensoral positioning techniques is needed. The utilization of this system in different applications, such as harvester operations, should also be explored. In addition to collecting tree-level and plot-level data for forest inventory, other possible applications of PLS for forest ecosystem services include mapping of canopy gaps, measuring leaf area index of large areas, documenting and visualizing forest routes feasible for recreation, hiking and berry and mushroom picking.

[Effects of target tree tending on community structure and diversity in subtropical natural secondary shrubs].

Science.gov (United States)

Zhang, Hui; Zhou, Guo Mo; Bai, Shang Bin; Wang, Yi Xiang; You, Yu Jie; Zhu, Ting Ting; Zhang, Hua Feng

2017-05-18

The typical natural secondary shrub community was chosen in Lin'an of Zhejiang Pro-vince to discover its possibility of restoration to arbor forest with three kinds of forest management models being taken, i.e., no care as control, closed forest management and target tree tending. Over four years growth, compared with control, closed forest management significantly increased average DBH and height by 130% and 50%, respectively, while 260% and 110% for target tree tending. In target tree tending plots, larger trees had been emerging with 4.5-8.5 cm diameter class and 4.5-8.5 m height class and formed a new storey of 4 m compared with control. The species biodiversity indexes at shrub layer were significantly increased in closed management plots, and did not decrease in target tree tending plots. Closed forest management did not change the tree species composition, following its previous succession direction. However, target tree tending increased the importance value of target species with the high potential succession direction of mixed coniferous-broadleaved forest. The results revealed that the secondary shrub community with target tree tending achieved more desired goals on DBH and height growth of dominant trees and species composition improvement compared with closed management. If the secondary shrub community could be managed when the operational conditions existed, target tree tending model should be selected to accelerate the restoration of shrub toward arbor forest.

Fission tracks diameters in glasses

International Nuclear Information System (INIS)

Garzon Ruiperez, L.; Veiguela, J.

1974-01-01

Standard glass microscope slides have been irradiated with fission fragments from the uranium. The etching track conditions have been the same for the series, having changed the etching time only for each specimen. For each glass, a minimum of 250 measurements of the tracks diameters have been made, the distributions of which are the bimodal type. Diameters-etching dependence with time is roughly lineal. Energy determinations have been made with the help of the diameters-energy relations. The calculated values agree very well with the know ones. (author) [es

Diameter-dependent coloration of silver nanowires

International Nuclear Information System (INIS)

Stewart, Mindy S; Qiu Chao; Jiang Chaoyang; Kattumenu, Ramesh; Singamaneni, Srikanth

2011-01-01

Silver nanowires were synthesized with a green method and characterized with microscopic and diffractometric methods. The correlation between the colors of the nanowires deposited on a solid substrate and their diameters was explored. Silver nanowires that appear similar in color in the optical micrographs have very similar diameters as determined by atomic force microscopy. We have summarized the diameter-dependent coloration for these silver nanowires. An optical interference model was applied to explain such correlation. In addition, microreflectance spectra were obtained from individual nanowires and the observed spectra can be explained with the optical interference theory. This work provides a cheap, quick and simple screening method for studying the diameter distribution of silver nanowires, as well as the diameter variations of individual silver nanowires, without complicated sample preparation.

The Spatial Pattern and Interactions of Woody Plants on the Temperate Savanna of Inner Mongolia, China: The Effects of Alternating Seasonal Grazing-Mowing Regimes.

Directory of Open Access Journals (Sweden)

Xiao Wang

Full Text Available Ulmus pumila tree-dominated temperate savanna, which is distributed widely throughout the forest-steppe ecotone on the Mongolian Plateau, is a relatively stable woody-herbaceous complex ecosystem in northern China. Relatively more attention has been paid to the degradation of typical steppe areas, whereas less focus has been placed on the succession of this typical temperate savanna under the present management regime. In this study, we established 3 sample plots 100 m×100 m in size along a gradient of fixed distances from one herder's stationary site and then surveyed all the woody plants in these plots. A spatial point pattern analysis was employed to clarify the spatial distribution and interaction of these woody plants. The results indicated that old U. pumila trees (DBH ≥ 20 cm showed a random distribution and that medium U. pumila trees (5 cm ≤ DBH < 20 cm showed an aggregated distribution at a smaller scale and a random distribution at a larger scale; few or no juvenile trees (DBH < 5 cm were present, and seedlings (without DBH formed aggregations in all 3 plots. These findings can be explained by an alternate seasonal grazing-mowing regime (exclosure in summer, mowing in autumn and grazing in winter and spring; the shrubs in all 3 plots exist along a grazing gradient that harbors xerophytic and mesophytic shrubs. Of these shrubs, xerophytic shrubs show significant aggregation at a smaller scale (0-5.5 m, whereas mesophytic shrubs show significant aggregation at a larger scale (0-25 m, which may be the result of the dual effects of grazing pressure and climate change. Medium trees and seedlings significantly facilitate the distributions of xerophytic shrubs and compete significantly with mesophytic shrubs due to differences in water use strategies. We conclude that the implementation of an alternative grazing-mowing regime results in xerophytic shrub encroachment or existence, breaking the chain of normal succession in a U. pumila

Estimates of live-tree carbon stores in the Pacific Northwest are sensitive to model selection

Science.gov (United States)

Susanna L. Melson; Mark E. Harmon; Jeremy S. Fried; James B. Domingo

2011-01-01

Estimates of live-tree carbon stores are influenced by numerous uncertainties. One of them is model-selection uncertainty: one has to choose among multiple empirical equations and conversion factors that can be plausibly justified as locally applicable to calculate the carbon store from inventory measurements such as tree height and diameter at breast height (DBH)....

Mapping aboveground carbon stocks using LiDAR data in Eucalyptus spp. plantations in the state of Sao Paulo, Brazil

Science.gov (United States)

Carlos Alberto Silva; Carine Klauberg; Samuel de Padua Chaves e Carvalho; Andrew T. Hudak; e Luiz Carlos Estraviz. Rodriguez

2014-01-01

Fast growing plantation forests provide a low-cost means to sequester carbon for greenhouse gas abatement. The aim of this study was to evaluate airborne LiDAR (Light Detection And Ranging) to predict aboveground carbon (AGC) stocks in Eucalyptus spp. plantations. Biometric parameters (tree height (Ht) and diameter at breast height (DBH)) were collected from...

Genetic control of wood density and bark thickness, and their ...

African Journals Online (AJOL)

Tree diameter under and over bark at breast height (dbh), wood density and bark thickness were assessed on samples from control-pollinated families of Eucalyptus grandis, E. urophylla, E. grandis × E. urophylla and E. urophylla × E. grandis. The material was planted in field trials in the coastal Zululand region of South ...

Investigations on Important Properties of the 10 cm x 10 cm GEM Prototype

CERN Document Server

Saenboonruang, Kiadtisak; Kulasri, Kittipong; Ritthirong, Anawat

2015-01-01

The Gas Electron Multiplier (GEM) detector is one of promising particle and radiation detectors that has been improved greatly from previous gas detectors. The improvement includes better spatial resolutions, higher detection rate capabilities, and flexibilities in designs. In particular, the 10 cm x 10 cm GEM prototype is designed and provided by the Gas Detectors Development group (GDD) at CERN, Switzerland. With its simplicity in operations and designs, while still maintaining high qualities, the GEM prototype is suitable for both start-up and advanced researches. This article aims to report the investigations on some important properties of the 10 cm x 10 cm GEM detector using current measurement and signal counting. Results have shown that gains of the GEM prototype exponentially increase as voltage supplied to the detector increases, while the detector reaches full efficiency (plateau region) when the voltage is greater than 4100 V. In terms of signal sharing between X and Y strips of the readout, X str...

Effects of electron irradiation and temperature on 1 ohm-cm and 10 ohm-cm silicon solar cells

Science.gov (United States)

Nicoletta, C. A.

1973-01-01

One OHM-cm and 10 OHM-cm silicon solar cells were exposed to 1.0 MeV electrons at a fixed flux of 10 to the 11th power e/sq cm/sec and fluences of 10 to the 13th power, 10 to the 14th power and 10 to the 15th power e/sq.cm. 1-V curves of the cells were made at room temperature, - 63 C and + or - 143 C after each irradiation. A value of 139.5 mw/sq cm was used as AMO incident energy rate per unit area. The 10 OHM-cm cells appear more efficient than 1 OHM-cm cells after exposure to a fluence greater than 10 to the 14th power e/sq cm. The 1.0 MeV electron damage coefficients for both 1 OHM-cm and 10 OHM-cm cells are somewhat less than those for previously irradiated cells at room temperature. The values of the damage coefficients increase as the cell temperatures decrease. Efficiencies pertaining to maximum power output are about the same as those of n on p silicon cells evaluated previously.

Isotachophoresis system having larger-diameter channels flowing into channels with reduced diameter and with selectable counter-flow

Energy Technology Data Exchange (ETDEWEB)

Mariella, Jr., Raymond P.

2018-03-06

An isotachophoresis system for separating a sample containing particles into discrete packets including a flow channel, the flow channel having a large diameter section and a small diameter section; a negative electrode operably connected to the flow channel; a positive electrode operably connected to the flow channel; a leading carrier fluid in the flow channel; a trailing carrier fluid in the flow channel; and a control for separating the particles in the sample into discrete packets using the leading carrier fluid, the trailing carrier fluid, the large diameter section, and the small diameter section.

7 CFR 51.320 - Diameter.

Science.gov (United States)

2010-01-01

... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... Standards for Grades of Apples Definitions § 51.320 Diameter. When measuring for minimum size, “diameter...

PATRÓN ESPACIAL DE LA REGENERACIÓN DE Aspidosperma polyneuron Müll. Arg. EN UN BOSQUE SOMETIDO A APROVECHAMIENTO SELECTIVO EN EL NORTE DE LA PROVINCIA DE MISIONES

Directory of Open Access Journals (Sweden)

Martín Pinazo

2009-01-01

observed. These results revealed that the regeneration of Aspidosperma polyneuron is strongly restricted to the presence of conspecific adult trees. On the other hand, the recruitments are associated with individuals from different species with DBH > 10 cm and infrequent in open sites.

Allometry and growth of six tree species in a terra firme forest in colombian amazonia

International Nuclear Information System (INIS)

Giraldo Pamplona Wilson A; Dairon, Alvaro; Cardenas Montoya J, Duque

2011-01-01

In this study carried out in the Amacayacu National Park in the Colombian Amazonia, we assessed the allometric relationship among different tree structural variables and the growth in diameter and biomass of six species classified according to their wood specific gravity. The tree species chosen were Eschweilera rufolia, Eschweilera itayensis, Conceveiba guianensis, Otoba parvifolia, Pseudolmedia laevis, and Apeiba aspera. The dbh was the most important structural explanatory variable. Regarding the total height dbh model, the allometric coefficient b changed between species showing a trend to increase, and thus a taper decrease, proportional to. There were o significant differences in diameter growth between species (P=0.119, F=1.80) or functional groups (P=0.153, F= 1.19). Likewise, biomass growth did not show significant differences neither between species (P=0.0784, F=2.05) nor functional groups (P=0.0711, F=2.71). However, there was a positive trend between and diameter growth and a negative one between and biomass growth. The results of this study suggest that this forest is recovering in biomass at a constant rate independent of the patch age, which emphasizes on the importance of pioneer species and gap formation on the carbon dynamics and the species coexistence in Amazonian tierra firme forests.

Effects of proton irradiation and temperature on 1 ohm-cm and 10 ohm-cm silicon solar cells

Science.gov (United States)

Nicoletta, C. A.

1973-01-01

The 1 ohm-cm and 10 ohm-cm silicon solar cells were exposed to 1.0 MeV protons at a fixed flux of 10 to the 9th power P/sq cm-sec and fluences of 10 to the 10th power, 10 to the 11th power, 10 to the 12th power and 3 X 10 to the 12th power P/sq cm. I-V curves of the cells were made at room temperature, 65 C and 165 C after each irradiation. A value of 139.5 mw/sq cm was taken as AMO incident energy rate per unit area. Degradation occurred for both uncovered 1 ohm-cm and 10 ohm-cm cells. Efficiencies are generally higher than those of comparable U.S. cells tested earlier. Damage (loss in maximum power efficiency) with proton fluence is somewhat higher for 10 ohm-cm cells, measured at the three temperatures, for fluences above 2 X 10 to the 11th power P/sq cm. Cell efficiency, as expected, changes drastically with temperature.

When the diameter of the abdominal aorta should be considered as abnormal? A new ultrasonographic index using the wrist circumference as a body build reference

Energy Technology Data Exchange (ETDEWEB)

Sconfienza, Luca Maria, E-mail: io@lucasconfienza.it [Servizio di Radiologia, IRCCS Policlinico San Donato, Piazza Malan 2 – 20097 San Donato Milanese, Milano (Italy); Dipartimento di Scienze Biomediche per la Salute, Università degli Studi di Milano, Piazza Malan 2 – 20097 San Donato Milanese, Milano (Italy); Santagostino, Ilaria, E-mail: isantagostino@hotmail.it [Scuola di Specializzazione in Radiodiagnostica, Università degli Studi di Milano, Via Festa del Perdono 7, 20100 Milano (Italy); Di Leo, Giovanni, E-mail: gianni.dileo77@gmail.com [Servizio di Radiologia, IRCCS Policlinico San Donato, Piazza Malan 2 – 20097 San Donato Milanese, Milano (Italy); Piazza, Raffaella; Gozzi, Gino, E-mail: radiologia.como@hsacomo.org [Diagnostica per Immagini, Ospedale Sant’Anna, Via Ravona 1, 22020 San Fermo della Battaglia, Como (Italy); Trimarchi, Santi, E-mail: satrimarchi@gmail.com [Chirurgia Vascolare II, IRCCS Policlinico San Donato, Piazza Malan 2 – 20097 San Donato Milanese, Milano (Italy); Sardanelli, Francesco, E-mail: francesco.sardanelli@unimi.it [Servizio di Radiologia, IRCCS Policlinico San Donato, Piazza Malan 2 – 20097 San Donato Milanese, Milano (Italy); Dipartimento di Scienze Biomediche per la Salute, Università degli Studi di Milano, Piazza Malan 2 – 20097 San Donato Milanese, Milano (Italy)

2013-10-01

Purpose: To use US to evaluate the normal values of aortic diameter (AD), stratifying the population by age, gender and body build, as measured using wrist circumference (WC). Materials and methods: Between April 2010 and February 2012, consecutive patients ≥ 30 years of age, without history of abdominal aortic aneurysm (AAA) were prospectively enrolled. They underwent an abdominal ultrasonography for reasons other than aorta evaluation. AD was measured at the infrarenal (AD{sub 1}), intermediate (AD{sub 2}), and iliac bifurcation (AD{sub 3}) levels: a diameter ≥ 3 cm was considered as an aneurysm. The maximal aortic diameter (AD{sub max}) was measured for AAA patients. WC was measured; AD/WC ratio was calculated and presented in percentage: the range of normal values was obtained excluding AAA cases and calculated as mean ± 1.96 × standard deviation. Pearson correlation coefficient was used. Results: We recruited 1200 patients, 15 (1.25%; age range = 64–86 years) had AAA. AD ranges of the other patients were: AD{sub 1} = 0.74–1.84 cm, AD{sub 2} = 0.78–1.85 cm, and AD{sub 3} = 0.68–1.76 cm for females; AD{sub 1} = 0.86–2.02 cm, AD{sub 2} = 0.91–2.08 cm, and AD{sub 3} = 0.84–1.95 cm for males. AD{sub 2}/WC ratio of non-AAA patients range was 4–15%, with only one outlier at 18%, while AD{sub max}/WC ratio of AAA patients range was 15–35% (p < 0.001). ADs were significantly correlated with WC (r = 0.253, p < 0.001 for AD{sub 1}, r = 0.318, p < 0.001 for AD{sub 2} and r = 0.280, p < 0.001 for AD{sub 3}). Conclusion: The definition of normal AD should consider body build. An AD{sub 2}/WC ratio of 15% may be regarded as a threshold to differentiate AAA- from non-AAA patients. Patients with AD{sub 2}/WC values comprised between 12% and 15% may be at risk for AAA.

Turbulent flow in a vessel agitated by side entering inclined blade turbine with different diameter using CFD simulation

Science.gov (United States)

Fathonah, N. N.; Nurtono, T.; Kusdianto; Winardi, S.

2018-03-01

Single phase turbulent flow in a vessel agitated by side entering inclined blade turbine has simulated using CFD. The aim of this work is to identify the hydrodynamic characteristics of a model vessel, which geometrical configuration is adopted at industrial scale. The laboratory scale model vessel is a flat bottomed cylindrical tank agitated by side entering 4-blade inclined blade turbine with impeller rotational speed N=100-400 rpm. The effect of the impeller diameter on fluid flow pattern has been investigated. The fluid flow patterns in a vessel is essentially characterized by the phenomena of macro-instabilities, i.e. the flow patterns change with large scale in space and low frequency. The intensity of fluid flow in the tank increase with the increase of impeller rotational speed from 100, 200, 300, and 400 rpm. It was accompanied by shifting the position of the core of circulation flow away from impeller discharge stream and approached the front of the tank wall. The intensity of fluid flow in the vessel increase with the increase of the impeller diameter from d=3 cm to d=4 cm.

Diametric structure in a tropical dry forest fragment in the Cerrado Eco-Museum region, Brazil

International Nuclear Information System (INIS)

Imana Encinas Jose, Antunes Santana Otacilio; Rainier Imana Christian

2011-01-01

In a tropical dry forest area of the Brazilian central region, the DBH distribution of 742 trees ≥ 5 cm was analyzed in a 4000 m 2 area. Eighty three tree species were found, of which 25 species with more than 10 individuals were analyzed for this study. The frequency histograms were obtained through the Meyer and Gaussian equations. The DBH distribution of the population showed a negative exponential inverse J curve. Of the 25 species selected, 14 exhibited the same pattern. Eight species presented a tendency near the normal distribution while three species had an abnormal pattern. We concluded that the observed fragment is in a natural auto regenerative status.

Large variations in diurnal and seasonal patterns of sap flux among Aleppo pine trees in semi-arid forest reflect tree-scale hydraulic adjustments

Science.gov (United States)

Preisler, Yakir; Tatarinov, Fyodor; Rohatyn, Shani; Rotenberg, Eyal; Grünzweig, José M.; Klein, Tamir; Yakir, Dan

2015-04-01

Adjustments and adaptations of trees to drought vary across different biomes, species and habitats, with important implications for tree mortality and forest dieback associated with global climate change. The aim of this study was to investigate possible links between the patterns of variations in water flux dynamics and drought resistance in Aleppo pine (Pinus halepensis) trees in a semi-arid stand (Yatir forest, Israel). We measured sap flow (SF) and variations in stem diameter, complemented with short-term campaigns of leaf-scale measurements of water vapour and CO2 gas exchange, branch water potential and hydraulic conductivity, as well as eddy flux measurements of evapotranspiration (ET) from a permanent flux tower at the site. SF rates were well synchronized with ET, reaching maximum rates during midday in all trees during the rainy season (Dec-Apr). However, during the dry season (May-Nov), the daily trend in the rates of SF greatly varied among trees, allowing classification into three tree classes: 1) trees with SF maximum rate constantly occurring in mid-day (12:00-13:00); 2)trees showing a shift to an early morning SF peak (04:00-06:00); and 3) trees shifting their daily SF peak to the evening (16:00-18:00). This classification did not change during the four years study period, between 2010 and 2014. Checking for correlation of tree parameters as DBH, tree height, crown size, and competition indices with rates of SF, indicated that timing of maximum SF in summer was mainly related to tree size (DBH), when large trees tended to have a later SF maximum. Dendrometer measurements indicated that large trees (high DBH) had maximum daily diameter in the morning during summer and winter, while small trees typically had maximum daily diameter during midday and afternoon in winter and summer, respectively. Leaf-scale transpiration (T) measurements showed typical morning peak in all trees, and another peak in the afternoon in large trees only. Different diurnal

First phase of small diameter heater experiments in tuff

International Nuclear Information System (INIS)

Zimmerman, R.M.

1983-01-01

As part of the Nevada Nuclear Waste Storage Investigations (NNWSI) project, we have undertaken small diameter heater experiments in the G-Tunnel Underground Facility on the Nevada Test Site (NTS). These experiments are to evaluate the thermal and hydrothermal behavior which might be encountered if heat producing nuclear waste were disposed of in welded and nonwelded tuffs. The two Phase I experiments discussed have focused on vertical borehole emplacements. In each experiment, temperatures were measured along the surface of the 10.2-cm-dia heater and the 12.7-cm-dia boreholes. For each experiment, measurements were compared with computer model representations. Maximum temperatures reached were: 196 0 C for the welded tuff after 21 days of operations at 800W and 173 0 C for the nonwelded tuff after 35 days of operations at 500W. Computed results indicate that the same heat transfer model (includes conduction and radiation only) can describe the behavior of both tuffs using empirical techniques to describe pore water vaporization. Hydrothermal measurements revealed heat-indiced water migration. Results indicated that small amounts of liquid water migrated into the welded tuff borehole early in the heating period. Once the rock-wall temperatures exceeded 94 0 C, in both tuffs, there was mass transport of water vapor as evidence indicated condensation cooler regions. Borehole pressures remained essentially ambient during the thermal periods

Profile Control by Biased Electrodes in Large Diameter RF Produced Pl asma

Science.gov (United States)

Shinohara, Shunjiro; Matsuoka, Norikazu; Yoshinaka, Toshiro

1998-10-01

Control of the plasma profile has been carried out, using the voltage biasing method in the large diameter (45 cm) RF (radio frequency) produced plasma in the presence of the uniform magnetic field (less than 1200 G). Under the low filling pressure condition of 0.16 mTorr, changing the biasing voltages to the three individual end plates with concentric circular ring shapes, the radial electron density (about 10^10 cm-3) profile could be changed from the hollow to the peaked one. On the contrary, the nearly flat electron temperature (several eV) profile did not change appreciably. The azimuthal rotation velocity measured by the Mach probe, i.e. directional probe, showed the different radial profiles (but nearly uniform along the axis) depending on the biasing voltage. This velocity became slower with the low magnetic field (less than 200 G) or in the higher pressure regime up to 20 mTorr with the higher electron density. The experimental results by other biasing methods will also be presented.

Evaluation of a cut-to-length system implementing fuel reduction treatments on the Coconino National Forest in Arizona

Science.gov (United States)

John Klepac; Bob Rummer; Jason Thompson

2006-01-01

A Cut-to-Length (CTL) system was evaluated for production and cost while implementing fuel reduction treatments in two stands on the Coconino National Forest in Arizona. Product recovery and fire behavior within each stand after treatment were also examined. Only trees less than 16 inches diameter breast height (DBH) were harvested. After logs were forwarded to a...

Incorporating additional tree and environmental variables in a lodgepole pine stem profile model

Science.gov (United States)

John C. Byrne

1993-01-01

A new variable-form segmented stem profile model is developed for lodgepole pine (Pinus contorta) trees from the northern Rocky Mountains of the United States. I improved estimates of stem diameter by predicting two of the model coefficients with linear equations using a measure of tree form, defined as a ratio of dbh and total height. Additional improvements were...

Appendiceal diameter: CT versus sonographic measurements

Energy Technology Data Exchange (ETDEWEB)

Orscheln, Emily S. [University of Cincinnati Medical Center, Department of Radiology, Cincinnati, OH (United States); Trout, Andrew T. [Cincinnati Children' s Hospital Medical Center, Department of Radiology, Cincinnati, OH (United States)

2016-03-15

Ultrasound and CT are the dominant imaging modalities for assessment of suspected pediatric appendicitis, and the most commonly applied diagnostic criterion for both modalities is appendiceal diameter. The classically described cut-off diameter for the diagnosis of appendicitis is 6 mm when using either imaging modality. To demonstrate the fallacy of using the same cut-off diameter for both CT and US in the diagnosis of appendicitis. We conducted a retrospective review of patients younger than 18 years who underwent both US and CT of the appendix within 24 h. The shortest transverse dimension of the appendix was measured at the level of the proximal, mid and distal appendix on US and CT images. We compared mean absolute difference in appendiceal diameter between US and CT, using the paired t-test. We reviewed exams of 155 children (58.7% female) with a mean age of 11.3 ± 4.2 years; 38 of the children (24.5%) were diagnosed with appendicitis. The average time interval between US and CT was 7.0 ± 5.4 h. Mean appendiceal diameter measured by CT was significantly larger than that measured by US in cases without appendicitis (5.3 ± 1.0 mm vs. 4.7 ± 1.1 mm, P < 0.0001) and in cases with appendicitis (8.3 ± 2.2 mm vs. 7.0 ± 2.0 mm, P < 0.0001). Mean absolute diameter difference at any location along the appendix was 1.3-1.4 mm in normal appendices and 2 mm in cases of appendicitis. Measured appendiceal diameter differs between US and CT by 1-2 mm, calling into question use of the same diameter cut-off (6 mm) for both modalities for the diagnosis of appendicitis. (orig.)

Appendiceal diameter: CT versus sonographic measurements

International Nuclear Information System (INIS)

Orscheln, Emily S.; Trout, Andrew T.

2016-01-01

Ultrasound and CT are the dominant imaging modalities for assessment of suspected pediatric appendicitis, and the most commonly applied diagnostic criterion for both modalities is appendiceal diameter. The classically described cut-off diameter for the diagnosis of appendicitis is 6 mm when using either imaging modality. To demonstrate the fallacy of using the same cut-off diameter for both CT and US in the diagnosis of appendicitis. We conducted a retrospective review of patients younger than 18 years who underwent both US and CT of the appendix within 24 h. The shortest transverse dimension of the appendix was measured at the level of the proximal, mid and distal appendix on US and CT images. We compared mean absolute difference in appendiceal diameter between US and CT, using the paired t-test. We reviewed exams of 155 children (58.7% female) with a mean age of 11.3 ± 4.2 years; 38 of the children (24.5%) were diagnosed with appendicitis. The average time interval between US and CT was 7.0 ± 5.4 h. Mean appendiceal diameter measured by CT was significantly larger than that measured by US in cases without appendicitis (5.3 ± 1.0 mm vs. 4.7 ± 1.1 mm, P < 0.0001) and in cases with appendicitis (8.3 ± 2.2 mm vs. 7.0 ± 2.0 mm, P < 0.0001). Mean absolute diameter difference at any location along the appendix was 1.3-1.4 mm in normal appendices and 2 mm in cases of appendicitis. Measured appendiceal diameter differs between US and CT by 1-2 mm, calling into question use of the same diameter cut-off (6 mm) for both modalities for the diagnosis of appendicitis. (orig.)

PHYTOSOCIOLOGY AND STRUCTURAL CHARACTERIZATION OF WOODY REGENERATION FROM A REFORESTATION WITH NATIVE SPECIES IN SOUTHEASTERN BRAZIL

Directory of Open Access Journals (Sweden)

Michel Anderson Almeida Colmanetti

2016-04-01

Full Text Available ABSTRACT In Brazil, specifically in São Paulo State, there are guidelines based on the high diversity of tropical forests that instructs the restoration projects in the state (current SMA 32/2014. The main goal of this study was verify the importance and effectiveness of the high diversity of arboreal species originated from a reforestation, and its influence in a woody regenerating composition. We developed a phytosociologic study in a woody regenerating stratum of a nine year old reforestation at a Private Reserve of Natural Heritage (RPPN, in Mogi-Guaçu, São Paulo State. All specimens with height > 30 cm and Diameter at Breast Height (DBH < 5 cm were evaluated. The woody regenerating diversity was smaller than the overstory diversity and the species composition was similar to the overstory. The Simpson index (1-D was 0.85, Shannon index (H' was 2.46 and the Pielou index (J' was 0.60. The zoochoric dispersion syndrome was major among the species. Our results suggest that the use of high diversity of native seedlings in a reforestation leads to high diversity of species in woody regeneration stratum, after one decade of planting.

Survey of vegetation and its diametric distribution in an area of cerrado sensu stricto and riparian forest fragment at Dois Irmãos stream in the Area of Environmental Protection (APA of Cafuringa, Federal District, Brazil.

Directory of Open Access Journals (Sweden)

José Elias de Paula

2009-09-01

Full Text Available All individual trees with a diameter at breast height (DBH of over 5cm, as well as the natural succession, were identified in 2,500m2 of the savannah (cerrado sensu stricto area and in 5,000m2 of the “Dois Irmãos” riparian forest vegetation (15º30’19”S and 48º06’18”W. The floristic composition of the cerrado sensu stricto was composed by 100 trees distributed in 25 species, and the riparian forest consisted of 155 trees distributed in 55 species. The natural regeneration was formed with 211 and 287 individuals in the cerrado sensu stricto and riparian forest distributed into 38 and 55 species respectively. The basal areas of the trees occupied 3.40m2.ha-1 in the cerrado sensu stricto and 5.08m2.ha-1 in the riparian forest. The diametric distribution curves for both plant communities, adjusted by the Meyers equation, demonstrated a typical tendency of reversed-J shape with strongly antropic action in the 11 to 17cm diametric classes.

Height-diameter allometry and above ground biomass in tropical montane forests: Insights from the Albertine Rift in Africa.

Science.gov (United States)

Imani, Gérard; Boyemba, Faustin; Lewis, Simon; Nabahungu, Nsharwasi Léon; Calders, Kim; Zapfack, Louis; Riera, Bernard; Balegamire, Clarisse; Cuni-Sanchez, Aida

2017-01-01

Tropical montane forests provide an important natural laboratory to test ecological theory. While it is well-known that some aspects of forest structure change with altitude, little is known on the effects of altitude on above ground biomass (AGB), particularly with regard to changing height-diameter allometry. To address this we investigate (1) the effects of altitude on height-diameter allometry, (2) how different height-diameter allometric models affect above ground biomass estimates; and (3) how other forest structural, taxonomic and environmental attributes affect above ground biomass using 30 permanent sample plots (1-ha; all trees ≥ 10 cm diameter measured) established between 1250 and 2600 m asl in Kahuzi Biega National Park in eastern Democratic Republic of Congo. Forest structure and species composition differed with increasing altitude, with four forest types identified. Different height-diameter allometric models performed better with the different forest types, as trees got smaller with increasing altitude. Above ground biomass ranged from 168 to 290 Mg ha-1, but there were no significant differences in AGB between forests types, as tree size decreased but stem density increased with increasing altitude. Forest structure had greater effects on above ground biomass than forest diversity. Soil attributes (K and acidity, pH) also significantly affected above ground biomass. Results show how forest structural, taxonomic and environmental attributes affect above ground biomass in African tropical montane forests. They particularly highlight that the use of regional height-diameter models introduces significant biases in above ground biomass estimates, and that different height-diameter models might be preferred for different forest types, and these should be considered in future studies.

Experimental determination of kQ factors for cylindrical ionization chambers in 10 cm × 10 cm and 3 cm × 3 cm photon beams from 4 MV to 25 MV.

Science.gov (United States)

Krauss, A; Kapsch, R P

2014-08-07

For the ionometric determination of absorbed dose to water, Dw, in megavoltage photon beams from a linear accelerator, beam-quality-dependent correction factors, kQ, are used for the ionization chambers. By using a water calorimeter, these factors can be determined experimentally and with substantially lower standard uncertainties compared to calculated values of the kQ, which are published in various dosimetry protocols. In this investigation, kQ for different types of cylindrical ionization chambers (NE 2561, NE 2571, FC 65 G) were determined experimentally in 10 cm × 10 cm photon beams from 4 MV to 25 MV (corresponding beam quality index TPR20,10 from 0.64 to 0.80). The measurements were carried out at the linear accelerator facility of the Physikalisch-Technische Bundesanstalt. It is shown that the kQ factors for a single ionization chamber in 10 cm × 10 cm photon beams can be measured with a relative standard uncertainty of 0.31%. In addition to these measurements in 10 cm × 10 cm fields, kQ factors for the NE 2561 chamber were also determined in smaller 3 cm × 3 cm photon beams between 6 MV and 25 MV. In this case, relative standard uncertainties between 0.35 % and 0.38 % are achieved for the kQ factors. It is found for this ionization chamber, that the ratio of the kQ factors in 3 cm × 3 cm and in 10 cm × 10 cm beams increases with increasing TPR20,10 to reach a value of 1.0095 at TPR20,10 = 0.8 with a relative standard uncertainty of 0.4 %.

Potential for large-diameter NTD silicon production in the Advanced Test Reactor

International Nuclear Information System (INIS)

Herring, J.S.; Korenke, R.E.

1984-01-01

The Advanced Test Reactor (ATR) is a 250-MW(t) flux-trap reactor located at the Idaho National Engineering Laboratory (INEL). Within the reflector are four 124-mm-diameter I-holes, which are available for silicon irradiation. Two large irradiation volumes of 0.5 m x 0.4 m x 1.2 m and 0.5 m x 0.2 m x 1.2 m are also available for transmutation doping. Thermal fluxes in these locations range from 0.56 to 23.0 x 10 12 nt/cm 3 -s. Use of the ATR for providing neutron transmutation doping (NTD) services in sizes not available elsewhere in the United States may be feasible

Determination of Am-241, Cm-242 and Cm-244 in environmental samples

International Nuclear Information System (INIS)

Afsar, M.; Schuettelkopf, H.

1988-01-01

An analytical procedure for the determination of Am and Cm in environmental, liquid and gaseous effluent samples was developed. It is based on extraction chromatography with subsequent anion and cation exchange to remove matrix elements and to purify Am and Cm, which are then electrode posited from an oxalate/HCl medium. The mean value of the chemical yield is about 90%. A detection limit of 7 μBq/g is achieved. The decontamination factors for important α emitters are > 10 4 . Four analyses/week can be performed by one technician. (orig./RB) [de

Composition and diversity of tree species in transects of location lowland evergreen forest of Ecuador

Directory of Open Access Journals (Sweden)

Jorge Caranqui A.

2015-09-01

Full Text Available The study was conducted in 9 transects 1000m2 of lowland evergreen forest, located in two locations on the coast and one in eastern Ecuador. It was to contribute to knowledge of the diversity and composition of woody plants over 10 cm diameter at breast height (DBH plus infer the state of conservation of forests based on the composition, the number of species, indices diversity and importance value (IV, found in 9 transects of 1000 m² of forest: 156 species, 107 genera and 39 families distributed in 9 transects, in each one the Simpson diversity index is of 0.92 to 0.95, in this case are diversity because all approaches 1. Most were found species aren´t present in all transects, the index value in each transect does not exceed 40%. Grouping transects match three locations exception made to transect 5 and 8 were conducted in disturbed sites, the most transects are intermediate disturbance that their high levels of diversity.

Phytosociology analysis of a fragment of Seasonal Deciduous Forest: Parque Estadual do Turvo, RS, Brazil

Directory of Open Access Journals (Sweden)

Rafaelo Balbinot

2016-06-01

Full Text Available The ecosystem formed by the Seasonal Deciduous Forest (SDF predominates in the region of Alto Uruguay in Rio Grande do Sul State, Brazil. This study aimed to analyze descriptively the floristic composition and the phytosociology of trees from a fragment of SDF present in Parque Estadual do Turvo (PET located in the Municipality of Derrubadas, Rio Grande do Sul State (Yucumã forest. We used the method of fixed area, based on 18 sample units with 1,000 m2 installed randomly oriented by the main road of the park. All wood species with diameter at 1.3 m above ground level (DBH greater than 10 cm were measured and identified. It was observed the presence of 842 individuals belonging to 32 families, 67 genera and 83 species (12% were not identified. The families with the highest number of species were Fabaceae, Euphorbiaceae, Meliaceae, Myrtaceae and Sapindaceae. Shannon index estimated was 3.72.

Characterization of a Semideciduous Forest in Varginha, MG. and comparison with remaining forest fragments in the region

Directory of Open Access Journals (Sweden)

Rafaela Pereira Naves

2012-09-01

Full Text Available A floristic and phytossociological survey was made at the biggest area of continue forest at Parque Florestal Municipal São Francisco de Assis, in Varginha county, south of Minas Gerais state. The area has 10 ha and possesses a water stream. It was sampled 25 plots of 20m x 20m and recorded all the individuals with diameter at breast height (DBH equal to or larger than 5 cm. The phytossociological survey recorded 1568 individuals, and basal area of 23.65 m².ha-¹ distributed in 103 species, 72 genera and 42 families. The floristic survey recorded 111 species, 77 genera and 43families. The families with bigger number of species were: Myrtaceae, Fabaceae and Melastomataceae and the most important species were Casearia arborea, Copaifera langsdorffii, Tachigali rugosa and Myrcia splendens. The obtained results are in accordance wih the expected ones for the semideciduous seasonal forests of the region.

Nineteen-Foot Diameter Explosively Driven Blast Simulator; TOPICAL

International Nuclear Information System (INIS)

VIGIL, MANUEL G.

2001-01-01

This report describes the 19-foot diameter blast tunnel at Sandia National Laboratories. The blast tunnel configuration consists of a 6 foot diameter by 200 foot long shock tube, a 6 foot diameter to 19 foot diameter conical expansion section that is 40 feet long, and a 19 foot diameter test section that is 65 feet long. Therefore, the total blast tunnel length is 305 feet. The development of this 19-foot diameter blast tunnel is presented. The small scale research test results using 4 inch by 8 inch diameter and 2 foot by 6 foot diameter shock tube facilities are included. Analytically predicted parameters are compared to experimentally measured blast tunnel parameters in this report. The blast tunnel parameters include distance, time, static, overpressure, stagnation pressure, dynamic pressure, reflected pressure, shock Mach number, flow Mach number, shock velocity, flow velocity, impulse, flow duration, etc. Shadowgraphs of the shock wave are included for the three different size blast tunnels

Beam depolarization and gain saturation in neodymium rods with a diameter of 85 mm

Energy Technology Data Exchange (ETDEWEB)

Sukhanov, V N; Ugodenko, A A

1990-04-01

Depolarization and gain saturation were investigated in rod amplifiers using phosphate and silicate Nd glasses 85 mm in diameter and 300 mm in length at a pulse duration of 35 ns. Total depolarization losses over the rod cross section were measured for various radial distributions of the small-signal gain. For the phosphate glass the losses amounted to 3-6 percent; for the silicate glass, they amounted to 4-7 percent. Saturation energy densities of 4.5 + or - 0.4 and 8.0 + or - 0.7 J/sq cm were obtained for the phosphate and silicate glass, respectively. 8 refs.

Operation of Small Radio Telescope (SRT) recorded 21 cm spectral line of Hydrogen at VATLY Laboratory

International Nuclear Information System (INIS)

Pham Ngoc Dong; Pham Tuan Anh; Pham Ngoc Diep; Pham Thi Tuyet Nhung; Nguyen Van Hiep

2013-01-01

A small radio telescope (SRT) has been installed on the roof of the Hanoi astrophysics laboratory VATLY. It is equipped with a 2.6 m diameter mobile parabolic dish remotely controlled in elevation and azimuth and with super-heterodyne detection around the 21 cm hydrogen line. They demonstrate the high quality of the telescope performance and are used to evaluate lobe size, signal to noise ratios, anthropogenic interferences and measurement accuracies. Particular attention is given to the measurement of the pointing accuracy. First results of observations of the Sun and of the centre of the Milky Way are presented. (author)

Crown dynamics and wood production of Douglas-fir trees in an old-growth forest

Science.gov (United States)

H. Roaki Ishii; Stephen C. Sillett; Allyson L. Carroll

2017-01-01

Large trees are the most prominent structural features of old-growth forests, which are considered to be globally important carbon sinks. Because of their large size, estimates of biomass and growth of large trees are often based on ground-level measurements (e.g., diameter at breast height, DBH) and little is known about growth dynamics within the crown. As trees...

The urban forests of Philadelphia

Science.gov (United States)

David J. Nowak; Allison R. Bodine; Robert Hoehn; Alexis Ellis; Sarah C. Low; Lara A. Roman; Jason G. Henning; Emily Stephan; Tom Taggert; Ted. Endreny

2016-01-01

An analysis of the urban forest in Philadelphia, Pennsylvania, reveals that this city has an estimated 2.9 million trees (encompassing all woody plants greater than 1 inch diameter at breast height [d.b.h]) with tree canopy that covers 20 percent of the city. The most common tree species are spicebush, black cherry, ash, tree-of-heaven, and boxelder, but the most...

Logging in hardwood stands established on farm land

International Nuclear Information System (INIS)

Bjoerheden, R.

1992-01-01

Performance and costs for different harvesting systems in broad leaf stands established on former tillage is presented. The calculations, combined with a forecast of the market development, shows that it is risky to aim production exclusively at bulk products as fibre or fibre/energy. The harvest of fibre or energy wood can, however, be used as a means to increase profitability of a silvicultural programme aimed at production of high quality hardwood lumber. Management and logging in these stands will be carried out with small scale technology, often by the private forest owner. Todays large scale systems are not competitive in these stands. The cost calculations show that we lack economically sound systems for harvesting stands in the interval up to 5 cm DBH. The lowest logging cost for these stands was calculated for motor manual felling and chipping with a chipper/dumper mounted on a farm tractor. This alternative is competitive also in the interval 5-10 cm DBH but there is a number of other feasible systems, e.g. off-road chippers processing motor manually felled and piled trees. Tree section systems with extraction by forwarder or a farm tractor with grapple loader and a bogic trailer operates at low costs to roadside but costs for processing and, maybe, a more expensive secondary transportation must then be added. For thinnings in the interval 10-25 cm DBH tree chipping is the most cost efficient if only energy assortments is to be harvested. However, at the current price relations between energy wood and pulpwood tree section systems are preferable also in stands over 10 cm since it allows a combined harvest of fibre and energy. For the same reason, the seemingly most interesting system in later thinnings is a system with differentiated processing. The term denotes a system where pulpwood is cut motor manually down to 12.5 cm and extracted by forwarder or farm tractor. The remaining tops and branches are processed by an off-road chipper. (36 refs., 11 figs.)

Point and Fixed Plot Sampling Inventory Estimates at the Savannah River Site, South Carolina.

Energy Technology Data Exchange (ETDEWEB)

Parresol, Bernard, R.

2004-02-01

This report provides calculation of systematic point sampling volume estimates for trees greater than or equal to 5 inches diameter breast height (dbh) and fixed radius plot volume estimates for trees < 5 inches dbh at the Savannah River Site (SRS), Aiken County, South Carolina. The inventory of 622 plots was started in March 1999 and completed in January 2002 (Figure 1). Estimates are given in cubic foot volume. The analyses are presented in a series of Tables and Figures. In addition, a preliminary analysis of fuel levels on the SRS is given, based on depth measurements of the duff and litter layers on the 622 inventory plots plus line transect samples of down coarse woody material. Potential standing live fuels are also included. The fuels analyses are presented in a series of tables.

Forest Resource Measurements by Combination of Terrestrial Laser Scanning and Drone Use

Science.gov (United States)

Cheung, K.; Katoh, M.; Horisawa, M.

2017-10-01

Using terrestrial laser scanning (TLS), forest attributes such as diameter at breast height (DBH) and tree location can be measured accurately. However, due to low penetration of laser pulses to tree tops, tree height measurements are typically underestimated. In this study, data acquired by TLS and drones were combined; DBH and tree locations were determined by TLS, and tree heights were measured by drone use. The average tree height error and root mean square error (RMSE) of tree height were 0.8 and 1.2 m, respectively, for the combined method, and -0.4 and 1.7 m using TLS alone. The tree height difference was compared using airborne laser scanning (ALS). Furthermore, a method to acquire 100 % tree detection rate based on TLS data is suggested in this study.

Fast separation of enantiomers by capillary electrophoresis using a combination of two capillaries with different internal diameters.

Science.gov (United States)

Šebestová, Andrea; Petr, Jan

2017-12-01

The combination of capillaries with different internal diameters was used to accelerate the separation of enantiomers in capillary electrophoresis. Separation of R,S-1,1'-binaphthalene-2,2'-diyl hydrogen phosphate using isopropyl derivative of cyclofructan 6 was studied as a model system. The best separation conditions included 500 mM sodium borate pH 9.5 with 60 mM concentration of the chiral selector. Separation lasted approx. 1.5 min using the combination of 50 and 100 μm id capillaries of 9.7 cm and 22.9 cm, respectively. It allowed approx. 12-fold acceleration in comparison to the traditional long-end separation mainly due to the higher electroosmotic flow generated in the connected capillaries. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Diameter 2 properties and convexity

Czech Academy of Sciences Publication Activity Database

Abrahamsen, T. A.; Hájek, Petr Pavel; Nygaard, O.; Talponen, J.; Troyanski, S.

2016-01-01

Roč. 232, č. 3 (2016), s. 227-242 ISSN 0039-3223 R&D Projects: GA ČR GA16-07378S Institutional support: RVO:67985840 Keywords : diameter 2 property * midpoint locally uniformly rotund * Daugavet property Subject RIV: BA - General Mathematics Impact factor: 0.535, year: 2016 https://www.impan.pl/pl/wydawnictwa/czasopisma-i-serie-wydawnicze/studia- mathematica /all/232/3/91534/diameter-2-properties-and-convexity

Dynamics of the population quantity of Juglans mandshurica Maxim. in different habitats in Xinjiang, China

International Nuclear Information System (INIS)

Yang, Y.; Li, J.; Zhang, W.

2015-01-01

Transects were arranged on the shady and sunny slopes, as well as at different elevations of the main, eastern, central, and western gullies in the Wild Walnut Nature Reserve in Xinjiang, China to survey a large sample of Juglans mandshurica. The structures of height class and diameter at breast height (DBH) class were used to represent age structure to compare and analyze the dynamics of the population quantity of J. mandshurica in different habitats. Results showed that J. mandshurica population comprises numerous young seedlings, which develop into young plants with a high death rate. The number of adult plants is stable. J. mandshurica population is r-strategists in the young stage, and k-strategists supplemented by r-strategists in the juvenile and subsequent stages. The structures of height class and DBH class fluctuate at different slope aspects and elevations. The growth of young seedlings into adult plants is discontinuous. Tree height and DBH are relatively uniform in the same age class, and the coefficient of variation is independent of slope aspect and elevation. The maximum numbers of age classes in J. mandshurica population with different height and DBH classes differ at three elevations. Low- and medium-age classes are dominant in all situations. That is, population is mainly composed of juvenile and adult trees, and age structure is classified as a growth type. Without strong external interference, J. mandshurica population will maintain its superior position in the community. (author)

Diameter characterization of timber species in primary forests of Cerro Murrucucu

International Nuclear Information System (INIS)

Villa G, Ana Maria

2006-01-01

This study in Cerro Murrucucu forests establishes the minimum fell diameter (DMC) and its fell cycle (C). It classifies the forest in 1 (Iess damaged) and 2 (severely damaged). Ten species were selected by means of the importance Value Index (IVI) and the DMC was determined. C was estimated through the times of step method. Pentaclethra macroloba showed the highest IVI (21.5% and 21.09% for forests 1 and 2, respectively). In spite of the deterioration of forest 2 the species still showed highest importance. In forest 1 an equilibrium can be deduced, whereas in forest 2 most of the considered species show instability. The DMC for forests 1 and 2 were 30 and 20 cm respectively, indicating extractive activities are deteriorating the latest. C was 51.8 years

Displacer Diameter Effect in Displacer Pulse Tube Refrigerator

Science.gov (United States)

Zhu, Shaowei

2017-12-01

Gas driving displacer pulse tube refrigerators are one of the work recovery type of pulse tube refrigerators whose theoretical efficiency is the same as Stirling refrigerators'. Its cooling power is from the displacement of the displacer. Displace diameter, rod diameter and pressure drop of the regenerator influence the displacement, which are investigated by numerical simulation. It is shown that the displacement ratio of the displacer over the piston is almost not affected by the displacer diameter at the same rod diameter ratio, or displacer with different diameters almost has the same performance.

Effects of root pruning on the growth and rhizosphere soil characteristics of short-rotation closed-canopy poplar

Energy Technology Data Exchange (ETDEWEB)

Du, Z. Y.; Xing, S. J.; Ma, B. Y.; Liu, F. C.; Ma, H. L.; Wang, Q. H.

2012-11-01

When poplar trees planted at a high density are canopy-closed in plantation after 4-5 years of growth, the roots of adjacent trees will inevitably intermingle together, which possibly restricts the nutrient uptake by root system. Root pruning might stimulate the emergence of fine roots and benefit the tree growth of short-rotation poplar at the stage of canopy closing. The aim of this study is to evaluate the effects of root pruning on DBH (diameter at breast height, 1.3 m), tree height, nutrients (N, P and K) and hormones (indoleacetic acid and cytokinin) in poplar leaves, gas exchange variables (photosynthetic rate and stomatal conductance), and rhizosphere soil characteristics. Field experiment was carried out with four-yearold poplar (Populus × euramericana cv. ‘Neva’) planted in a fluvo-aquic loam soil in Shandong province, China in early April, 2008. Three root pruning treatments (severe, moderate and light degree) were conducted at the distances of 6, 8 and 10 times DBH on both inter-row sides of the trees to the depth of 30 cm, respectively. The results showed that the growth performance was obtained in the following order of treatments: moderate > light = control > severe. In the rhizophere soil, moderate and light pruning increased the microbial populations, enzymatic activities, and the concentrations of available N, P, K and organic matter. Generally, root pruning to improve tree growth and rhizosphere soil fertility can be recommended in canopy-closed poplar plantation. The appropriate selection of root pruning intensity is a pivotal factor for the effectiveness of this technique. (Author) 35 refs.

Mortality and recruitment of trees in a tropical rain forest of Choco (Colombia)

International Nuclear Information System (INIS)

Quinto M, Harley; Rengifo I, Reimer; Ramos P, Yan

2009-01-01

A Rates of mortality and recruitment of trees were calculated in a permanent research plot established in the tropical wet forest. The study was based on two measurements, one was done in 1998 and the other in 2005, in which were measured the diameter (DBH) of trees with DBH>10 cm and surveyed dead and recruited trees. We also determined the type of mortality, the mortality and exponential recruitment coefficient, the aboveground biomass (AB) and the mean life of the forest. In the first census 709 individuals were recorded and 710 in the second one. The mean annual mortality rate of trees was 1.39% and the exponential mortality coefficient was 1.41%; the most common types of mortality were uprooting and snags. Annual recruitment rate was 1.2% and the exponential rate of recruitment was 1.19%. Mean life of this forest was estimated in 58.6 years. The AB was of 237.31 t ha-1 in the year 1998, and in the 2005 was of 259.9 t ha-1. The recruited individuals presented AB of 5.08 t ha-1, and the dead of 17.72 t ha-1; the increment of AB in survivors was 30.97 t ha-1 average. Similarity of number of individuals between measurements, as well as in the other parameters evaluated, suggest a possible balance between mortality and recruitment of this forest. Based on the results of this study, we could no reject the hypothesis of dynamic equilibrium of this tropical wet forest.

CM : becoming a technology firm

NARCIS (Netherlands)

Burg, van J.C.; Reymen, I.M.M.J.; Dolmans, S.A.M.

2011-01-01

Founded in 2000 as a Short Message Service (SMS) marketing company for discos (clubs), CM evolved into a technology provider for SMS services. By 2008, CM was market leader in The Netherlands, a position won by offering high quality services at low prices. In 2010, the founders of the company were

Comparison of Colour Duplex Ultrasound with Computed Tomography to Measure the Maximum Abdominal Aortic Aneurysmal Diameter

Directory of Open Access Journals (Sweden)

C. Gray

2014-01-01

Full Text Available Introduction. Maximum diameter of an abdominal aortic aneurysm (AAA is the main indication for surgery. This study compared colour duplex ultrasound (CDU and computed tomography (CT in assessing AAA diameter. Patients and Methods. Patients were included if they had both scans performed within 90 days. Pearson’s correlation coefficient, paired t-test, and limits of agreement (LOA were calculated for the whole group. Subgroup analysis of small (6.5 cm aneurysms was performed. A P value of <0.05 was considered statistically significant. Results. 389 patients were included, giving 130 pairs of tests for comparison. Excellent correlation was in the whole group (r = 0.95 and in the subgroups (r = 0.94; 0.69; 0.96, resp.. Small LOA between the two imaging modalities was found in all subgroups. Conclusion. Small aneurysms can be accurately measured using CDU. CDU is preferable for small AAAs, but cannot supplant CT for planning aortic intervention.

Experience in the fabrication of 224 cm diameter electromagnet and coil for the Variable Energy Cyclotron Centre (Paper No. 005)

International Nuclear Information System (INIS)

Chaudhuri, J.; Das, S.K.; Bhattacharjee, B.B.

1987-02-01

The largest and vital component of a cyclotron is the D.C. magnet. The magnet core of cyclotron of the Variable Energy Cyclotron, Calcutta, is of H-shaped and made from low carbon steel casting and weighs nearly 262 tonnes. In length, width and height, the magnet is 6096mm x 2235mm x 2896mm respectively. The pole piece diameter is 2235mm with pole gap of 190.5±0.127. For convenient of handling and transportation, the upper and lower yoke of the magnet is in five pieces each. Apart from this, magnet has two numbers of legs and two numbers of pole pieces. The pole pieces are again splitted in two pieces for the convenience of fabrication assembly. The dimensions of the castings in the finished machined condition are 6096±1.5 x 889 x 447±0.026 for yoke slabs and 1117.6±0.8 (H) x 1092±1.5 (L) x 2235±1.5 (Max.) x 1422 (Min.) mm for the magnet legs. The weight of each casting of yoke slab is 19000 kg and that of leg casting is 17420 Kg each. The castings are required to have required magnetic saturation value and soundness of casting to the rolled steel standard. (author). 7 figs

Accuracy of free energies of hydration using CM1 and CM3 atomic charges.

Science.gov (United States)

Udier-Blagović, Marina; Morales De Tirado, Patricia; Pearlman, Shoshannah A; Jorgensen, William L

2004-08-01

Absolute free energies of hydration (DeltaGhyd) have been computed for 25 diverse organic molecules using partial atomic charges derived from AM1 and PM3 wave functions via the CM1 and CM3 procedures of Cramer, Truhlar, and coworkers. Comparisons are made with results using charges fit to the electrostatic potential surface (EPS) from ab initio 6-31G* wave functions and from the OPLS-AA force field. OPLS Lennard-Jones parameters for the organic molecules were used together with the TIP4P water model in Monte Carlo simulations with free energy perturbation theory. Absolute free energies of hydration were computed for OPLS united-atom and all-atom methane by annihilating the solutes in water and in the gas phase, and absolute DeltaGhyd values for all other molecules were computed via transformation to one of these references. Optimal charge scaling factors were determined by minimizing the unsigned average error between experimental and calculated hydration free energies. The PM3-based charge models do not lead to lower average errors than obtained with the EPS charges for the subset of 13 molecules in the original study. However, improvement is obtained by scaling the CM1A partial charges by 1.14 and the CM3A charges by 1.15, which leads to average errors of 1.0 and 1.1 kcal/mol for the full set of 25 molecules. The scaled CM1A charges also yield the best results for the hydration of amides including the E/Z free-energy difference for N-methylacetamide in water. Copyright 2004 Wiley Periodicals, Inc.

STRUCTURAL CHARACTERIZATION OF A SEMIDECIDUOUS FOREST FRAGMENT IN IBITURUNA COUNTY, MG

Directory of Open Access Journals (Sweden)

Vagner Fernandes da Silva

2003-01-01

Full Text Available A survey describing the physiognomic structure and the species composition and diversityof the tree community was carried out in a fragment of tropical semideciduous forest. The forestfragment, with an area of 57ha, is situated at 21 °09’S of latitude and 44 °50’W of longitude, in Ibiturunacounty, Minas Gerais state, Brazil. The surveys were carried out in two sectors of the fragment,Slope and Valley, where 26 (20 ×20m plots were located. All trees with diameter at breast height dbh ≥ 5 cm were identified and measured (diameter and height. The survey registered 1008 tree,distributed in 191 species, 128 genera and 54 families; 20 species were added to this total andregistered during incursions outside the plots. The Fabaceae (Leguminosae family stood out for itsrichness of species (30 and genera (18, representing 15,7% of the total species registered. In secondplace, the Myrtaceae family presented 20 species and 9 genera, followed by the Lauraceae family,with 17 species and 7 genera. Other families that contributed with an expressive number of specieswere: Meliaceae, with 11; Euphorbiaceae, with 8; Malvaceae and Rubiaceae, both with 7 species.This floristic profile may be considered typical of the semideciduous forests of the region.

EFEITO DA SILVICULTURA PÓS-COLHEITA NA POPULAÇÃO DE Lecythis lurida (Miers Mori EM UMA FLORESTA DE TERRA FIRME NA AMAZÔNIA BRASILEIRA

Directory of Open Access Journals (Sweden)

Marisol Taffarel

2014-01-01

Full Text Available The growth rate of trees dbh > 35cm of a Lecythis lurida (Miers Mori (jarana population was evaluated in a 700ha area of natural forest after logging and applying silvicultural treatments in the municipality of Paragominas, in Pará state. Seven treatments were established: in three of them climbers were cut and competitor trees were girdled after logging; in two of them only climber cutting was performed; in oneof them the forest was logged; and one of them remained with no silvicultural intervention. The yearly diameter increment of the species was calculated from 2005 to 2009, considering also the crown shape of trees and the intensity of light on tree crown. Growth rate of Lecythis lurida was higher in T3 (only climber cutting’differing statistically from the T7 (unlogged forest. In the treatments T1, T2 and T3 where climber were cut and competitors-trees were girdled, diameter increment of the species was similar to the forest that was logged but not treated, although the trees with good shape and complete crowns receiving full light had high increment in those treatments. Therefore, one can infer that five years were not enough to conclude on the effects of the silvicultural treatments over the species growth rate.

Compatible above-ground biomass equations and carbon stock estimation for small diameter Turkish pine (Pinus brutia Ten.).

Science.gov (United States)

Sakici, Oytun Emre; Kucuk, Omer; Ashraf, Muhammad Irfan

2018-04-15

Small trees and saplings are important for forest management, carbon stock estimation, ecological modeling, and fire management planning. Turkish pine (Pinus brutia Ten.) is a common coniferous species and comprises 25.1% of total forest area of Turkey. Turkish pine is also important due to its flammable fuel characteristics. In this study, compatible above-ground biomass equations were developed to predict needle, branch, stem wood, and above-ground total biomass, and carbon stock assessment was also described for Turkish pine which is smaller than 8 cm diameter at breast height or shorter than breast height. Compatible biomass equations are useful for biomass prediction of small diameter individuals of Turkish pine. These equations will also be helpful in determining fire behavior characteristics and calculating their carbon stock. Overall, present study will be useful for developing ecological models, forest management plans, silvicultural plans, and fire management plans.

Correlations between some physiographic factors and diameter, height and cone characteristics in stone pine (Pinus pinea L. afforestation areas in Balıkesir-Burhaniye region

Directory of Open Access Journals (Sweden)

Ali Ömer Üçler

2017-11-01

Full Text Available In this study, effects of some physiographic factors (aspect, slope and elevation on breast diameter, height and cone properties (cone weight, number of cones, cone width and cone length in stone pine (Pinus pinea L. afforestation areas in Balıkesir-Burhaniye region were investigated. To determine to effects of physiographic conditions, study area is separated according to aspect, slope and elevation groups. Aspect is separated two groups which are shady aspect (B1 and sunny aspect (B2. Slope is separated two groups which are small from 36 percent (E1 and big from 36 percent (E2. Elevation also is separated two groups which are under 400 meters (Y1 and over 400 meters (Y2. Sample areas were scattering to land classifications by using Stratified Sampling Method. Thus, each aspect, slope and elevation classifications were obtained from sample area where are provided from 32 different areas. Tree heights, the diameter at breast height and cone number were measured on saplings. In addition, in each sample area five Pinus pinea trees were selected. It was measured cone diameter, cone height and air-dries weight values of cones which are picked from selecting trees. According to statistical analysis results, aspect effects to tree heights, cone number and cone weight; slope effects the diameter at breast height, cone number and cone diameter; elevation effects the diameter at breast height, tree height, cone number and cone weight. In terms of tree height and diameter values; the highest average breast height diameter was found in the B1E1Y1 with 13.6 cm, and the highest average height value was found in the B2E2Y2 by interaction. In terms of cone characteristics; with the highest average cone number of 8.5 in B1E1Y1, the highest mean cone weight in B1E1Y1 with 232 gr and the highest cone diameter in B2E2Y1 with 5.4 cm. According to the results of correlation analysis; it was determined that slope and elevation factors have positive effect on breast

Diameter effect on critical heat flux

International Nuclear Information System (INIS)

Tanase, A.; Cheng, S.C.; Groeneveld, D.C.; Shan, J.Q.

2009-01-01

The critical heat flux look-up table (CHF LUT) is widely used to predict CHF for various applications, including design and safety analysis of nuclear reactors. Using the CHF LUT for round tubes having inside diameters different from the reference 8 mm involves conversion of CHF to 8 mm. Different authors [Becker, K.M., 1965. An Analytical and Experimental Study of Burnout Conditions in Vertical Round Ducts, Aktiebolaget Atomenergie Report AE 177, Sweden; Boltenko, E.A., et al., 1989. Effect of tube diameter on CHF at various two phase flow regimes, Report IPE-1989; Biasi, L., Clerici, G.C., Garriba, S., Sala, R., Tozzi, A., 1967. Studies on Burnout, Part 3, Energia Nucleare, vol. 14, pp. 530-536; Groeneveld, D.C., Cheng, S.C., Doan, T., 1986. AECL-UO critical heat flux look-up table. Heat Transfer Eng., 7, 46-62; Groeneveld et al., 1996; Hall, D.D., Mudawar, I., 2000. Critical heat flux for water flow in tubes - II subcooled CHF correlations. Int. J. Heat Mass Transfer, 43, 2605-2640; Wong, W.C., 1996. Effect of tube diameter on critical heat flux, MaSC dissertation, Ottawa Carleton Institute for Mechanical and Aeronautical Engineering, University of Ottawa] have proposed several types of correlations or factors to describe the diameter effect on CHF. The present work describes the derivation of new diameter correction factor and compares it with several existing prediction methods

Abnormal splenic artery diameter/hepatic artery diameter ratio in cirrhosis-induced portal hypertension

Science.gov (United States)

Zeng, Dao-Bing; Dai, Chuan-Zhou; Lu, Shi-Chun; He, Ning; Wang, Wei; Li, Hong-Jun

2013-01-01

AIM: To determine an optimal cutoff value for abnormal splenic artery diameter/proper hepatic artery diameter (S/P) ratio in cirrhosis-induced portal hypertension. METHODS: Patients with cirrhosis and portal hypertension (n = 770) and healthy volunteers (n = 31) underwent volumetric computed tomography three-dimensional vascular reconstruction to measure the internal diameters of the splenic artery and proper hepatic artery to calculate the S/P ratio. The cutoff value for abnormal S/P ratio was determined using receiver operating characteristic curve analysis, and the prevalence of abnormal S/P ratio and associations between abnormal S/P ratio and major complications of portal hypertension were studied using logistic regression. RESULTS: The receiver operating characteristic analysis showed that the cutoff points for abnormal splenic artery internal diameter and S/P ratio were > 5.19 mm and > 1.40, respectively. The sensitivity, specificity, positive predictive value, and negative predictive value were 74.2%, 45.2%, 97.1%, and 6.6%, respectively. The prevalence of an abnormal S/P ratio in the patients with cirrhosis and portal hypertension was 83.4%. Patients with a higher S/P ratio had a lower risk of developing ascites [odds ratio (OR) = 0.708, 95%CI: 0.508-0.986, P = 0.041] and a higher risk of developing esophageal and gastric varices (OR = 1.483, 95%CI: 1.010-2.175, P = 0.044) and forming collateral circulation (OR = 1.518, 95%CI: 1.033-2.230, P = 0.034). After splenectomy, the portal venous pressure and maximum and mean portal venous flow velocities were reduced, while the flow rate and maximum and minimum flow velocities of the hepatic artery were increased (P portal hypertension, and it can be used as an important marker of splanchnic hemodynamic disturbances. PMID:23483462

Production and cost analysis of a feller-buncher in central Appalachian hardwood forest

Science.gov (United States)

Charlie Long; Jingxin Wang; Joe McNeel; John Baumgras; John Baumgras

2002-01-01

A time study was conducted to evaluate the productivity and cost of a feller-buncher operating in a Central Appalachian hardwood forest. The sites harvested during observation consisted of primarily red maple and black cherry. Trees felled in the study had an average diameter at breast height (DBH) of 16.1 in. and a total merchantable height of 16 ft. A Timbco 445C...

Brush competition retards early stand development of planted ponderosa pine: update on a 24-year study

Science.gov (United States)

William W. Oliver

1990-01-01

Growth of ponderosa pine (Pinus ponderosa) was monitored for 24 years after planting at five different square spacings (6, 9. 12, 15, and 18 ft) in the presence or absence of competing brush on the westside Sierra Nevada. Spacing strongly influenced both mean dbh and basal area/ac. In plots maintained free of brush, diameters ranged from 5.1 in. at the 6-ft spacing to...

Database and prediction model for CANDU pressure tube diameter

Energy Technology Data Exchange (ETDEWEB)

Jung, J.Y.; Park, J.H. [Korea Atomic Energy Research Inst., Daejeon (Korea, Republic of)

2014-07-01

The pressure tube (PT) diameter is basic data in evaluating the CCP (critical channel power) of a CANDU reactor. Since the CCP affects the operational margin directly, an accurate prediction of the PT diameter is important to assess the operational margin. However, the PT diameter increases by creep owing to the effects of irradiation by neutron flux, stress, and reactor operating temperatures during the plant service period. Thus, it has been necessary to collect the measured data of the PT diameter and establish a database (DB) and develop a prediction model of PT diameter. Accordingly, in this study, a DB for the measured PT diameter data was established and a neural network (NN) based diameter prediction model was developed. The established DB included not only the measured diameter data but also operating conditions such as the temperature, pressure, flux, and effective full power date. The currently developed NN based diameter prediction model considers only extrinsic variables such as the operating conditions, and will be enhanced to consider the effect of intrinsic variables such as the micro-structure of the PT material. (author)

Calorimetric determination of kQ factors for NE 2561 and NE 2571 ionization chambers in 5 cm x 5 cm and 10 cm x 10 cm radiotherapy beams of 8 MV and 16 MV photons.

Science.gov (United States)

Krauss, Achim; Kapsch, Ralf-Peter

2007-10-21

The relative uncertainty of the ionometric determination of the absorbed dose to water, D(w), in the reference dosimetry of high-energy photon beams is in the order of 1.5% and is dominated by the uncertainty of the calculated chamber- and energy-dependent correction factors k(Q). In the present investigation, k(Q) values were determined experimentally in 5 cm x 5 cm and 10 cm x 10 cm radiotherapy beams of 8 MV and 16 MV bremsstrahlung by means of a water calorimeter operated at 4 degrees C. Ionization chambers of the types NE 2561 and NE 2571 were calibrated directly in the water phantom of the calorimeter. The measurements were carried out at the linear accelerator of the Physikalisch-Technische Bundesanstalt. It is shown that the k(Q) factor of a single ionization chamber can be measured with a standard uncertainty of less than 0.3%. No significant variations of k(Q) were found for the different lateral sizes of the radiation fields used in this investigation.

Scalability of pre-packed preparative chromatography columns with different diameters and lengths taking into account extra column effects.

Science.gov (United States)

Schweiger, Susanne; Jungbauer, Alois

2018-02-16

Small pre-packed columns are commonly used to estimate the optimum run parameters for pilot and production scale. The question arises if the experiments obtained with these columns are scalable, because there are substantial changes in extra column volume when going from a very small scale to a benchtop column. In this study we demonstrate the scalability of pre-packed disposable and non-disposable columns of volumes in the range of 0.2-20 ml packed with various media using superficial velocities in the range of 30-500 cm/h. We found that the relative contribution of extra column band broadening to total band broadening was not only high for columns with small diameters, but also for columns with a larger volume due to their wider diameter. The extra column band broadening can be more than 50% for columns with volumes larger than 10 ml. An increase in column diameter leads to high additional extra column band broadening in the filter, frits, and adapters of the columns. We found a linear relationship between intra column band broadening and column length, which increased stepwise with increases in column diameter. This effect was also corroborated by CFD simulation. The intra column band broadening was the same for columns packed with different media. An empirical engineering equation and the data gained from the extra column effects allowed us to predict the intra, extra, and total column band broadening just from column length, diameter, and flow rate. Copyright © 2018 The Author(s). Published by Elsevier B.V. All rights reserved.

The longevity of large pine snags in eastern Texas

Science.gov (United States)

Richard N. Conner; Daniel Saenz

2005-01-01

Habitat for cavity-nesting wildlife is closely tied to the availability of standing dead trees (snags). Large snags (>40 cm dbh) are particularly important because they provide cavity- excavation substrate for both large and small cavity excavators. Historically in the southern United States, common belief has been that the utility of pine (Pinus...

Primary chemotherapy and preoperative-dose irradiation for patients with stage II larger than 3 CM or locally advanced non inflammatory breast cancer

International Nuclear Information System (INIS)

Touboul, E.; Lefranc, J.P.; Blondon, J.; Deniaud, E.; Buffat, L.; Benmiloud, M.; Laugier, A.; Schlienger, M.

1995-01-01

Purpose: The aims of this prospective study were to evaluate the outcome and the possibility of breast conserving treatment for patients with stage II larger than 3 cm or locally advanced non inflammatory breast cancer, after primary chemotherapy followed by external preoperative-dose irradiation. Materials and methods: Between April 1982 and June 1990, 147 consecutive patients with large breast cancer (stage II > 3 cm [n=50], stage IIIA [n=58], stage IIIB [n=35] and stage IV with isolated clinical supraclavicular or sub-clavicular node involvement [n=4] were treated. The median age was 49 years. Mean tumor size was 6 cm (range 1 - 16 cm). Sixty percent (n=88) of the patients were postmenopausal. Histological classification was : 120 infiltrating ductal carcinomas, 21 infiltrating lobular carcinomas, 4 medullary carcinomas and 2 mucosecreting carcinomas. Grade distribution according to Scarff, Bloom and Richardson was : 14 grade 1, 72 grade 2, 30 grade 3 and 31 non classified. Median follow-up was 94 months from the beginning of the treatment. The induction treatment consisted of 4 courses of chemotherapy (doxorubicin, vincristine, cyclophosphamide, 5-fluorouracil) every 4 weeks followed by preoperative irradiation (45 Gy to the breast and nodal areas) using 60Co in 141 patients and 6 MV photons in 6 patients. A fifth course of chemotherapy was given after radiation therapy and three different locoregional approaches were proposed depending on the tumoral response. In 52 patients (35%) with residual tumor larger than 3 cm in diameter or located behind the nipple or with bifocal tumors, mastectomy and axillary dissection were performed. Ninety-five other patients (65%) benefited from conservative treatment : 48 patients (33%) achieved complete remission and received a booster dose of 25 to 30 Gy to the initial tumor bed by external photon beam or by iridium 192 implant ; 47 patients (32%) who had a residual mass less than or equal to 3 cm in diameter were treated by

Mixed-Forest Species Establishment in a Monodominant Forest in Central Africa: Implications for Tropical Forest Invasibility

Science.gov (United States)

Peh, Kelvin S.-H.; Sonké, Bonaventure; Séné, Olivier; Djuikouo, Marie-Noël K.; Nguembou, Charlemagne K.; Taedoumg, Hermann; Begne, Serge K.; Lewis, Simon L.

2014-01-01

Background Traits of non-dominant mixed-forest tree species and their synergies for successful co-occurrence in monodominant Gilbertiodendron dewevrei forest have not yet been investigated. Here we compared the tree species diversity of the monodominant forest with its adjacent mixed forest and then determined which fitness proxies and life history traits of the mixed-forest tree species were most associated with successful co-existence in the monodominant forest. Methodology/Principal Findings We sampled all trees (diameter in breast height [dbh]≥10 cm) within 6×1 ha topographically homogenous areas of intact central African forest in SE Cameroon, three independent patches of G. dewevrei-dominated forest and three adjacent areas (450–800 m apart). Monodominant G. dewevrei forest had lower sample-controlled species richness, species density and population density than its adjacent mixed forest in terms of stems with dbh≥10 cm. Analysis of a suite of population-level characteristics, such as relative abundance and geographical distribution, and traits such as wood density, height, diameter at breast height, fruit/seed dispersal mechanism and light requirement–revealed after controlling for phylogeny, species that co-occur with G. dewevrei tend to have higher abundance in adjacent mixed forest, higher wood density and a lower light requirement. Conclusions/Significance Our results suggest that certain traits (wood density and light requirement) and population-level characteristics (relative abundance) may increase the invasibility of a tree species into a tropical closed-canopy system. Such knowledge may assist in the pre-emptive identification of invasive tree species. PMID:24844914

Growth of teak regenerated by coppice and stump planting in Mae Moh Plantation, Lampang province, Thailand

Directory of Open Access Journals (Sweden)

Anatta Auykim

2017-08-01

Full Text Available The current annual increment (CAIdbh and the mean annual increment (MAIdbh both for the diameter at breast height (1.3 m were investigated to compare the differences between coppice and stump-planted teak in Mae Moh Plantation. Forty-eight sample cores were collected from a 9 yr-old teak plantation using an increment borer; annual increments were analyzed using dendrochronological techniques. The results indicated that there was no significant (p > 0.05 difference in the average diameter at breast height (DBH between the coppice and stump-planted teak, whereas the total height of stump planting was significantly greater than that of coppice teak. The CAIdbh of coppice teak was in the range 0.316–2.371 cm and continuously decreased throughout the 9 yr period. The CAIdbh of stump planting was in the range 0.162–1.982 cm and continuously increased from the beginning of growth for 5 yr followed by a decline thereafter for 4 yr. The CAIdbh of coppice showed rapid growth in the years 1–4 and was greater than for the stump-planted teak even in years 5–8 after planting; however, the growth of the stump-planted teak in the ninth year was higher than for the coppice. The MAIdbh values of coppice and stump-planted teak were not significantly (p > 0.05 different. The results showed that CAIdbh at age 5 yr can be used as a silvicultural guide to increase the yield of teak coppice.

Mixed-forest species establishment in a monodominant forest in central Africa: implications for tropical forest invasibility.

Directory of Open Access Journals (Sweden)

Kelvin S-H Peh

Full Text Available BACKGROUND: Traits of non-dominant mixed-forest tree species and their synergies for successful co-occurrence in monodominant Gilbertiodendron dewevrei forest have not yet been investigated. Here we compared the tree species diversity of the monodominant forest with its adjacent mixed forest and then determined which fitness proxies and life history traits of the mixed-forest tree species were most associated with successful co-existence in the monodominant forest. METHODOLOGY/PRINCIPAL FINDINGS: We sampled all trees (diameter in breast height [dbh]≥10 cm within 6×1 ha topographically homogenous areas of intact central African forest in SE Cameroon, three independent patches of G. dewevrei-dominated forest and three adjacent areas (450-800 m apart. Monodominant G. dewevrei forest had lower sample-controlled species richness, species density and population density than its adjacent mixed forest in terms of stems with dbh≥10 cm. Analysis of a suite of population-level characteristics, such as relative abundance and geographical distribution, and traits such as wood density, height, diameter at breast height, fruit/seed dispersal mechanism and light requirement-revealed after controlling for phylogeny, species that co-occur with G. dewevrei tend to have higher abundance in adjacent mixed forest, higher wood density and a lower light requirement. CONCLUSIONS/SIGNIFICANCE: Our results suggest that certain traits (wood density and light requirement and population-level characteristics (relative abundance may increase the invasibility of a tree species into a tropical closed-canopy system. Such knowledge may assist in the pre-emptive identification of invasive tree species.

Organic matter evolution throughout a 100-cm ombrotrophic profile from an Italian floating mire

Science.gov (United States)

Zaccone, Claudio; D'Orazio, Valeria; Lobianco, Daniela; Miano, Teodoro M.

2015-04-01

The curious sight of an island floating and moving on a lake naturally, already described by Pliny the Elder in his Naturalis historia (AD 77-79), fascinated people from time immemorial. Floating mires are defined by the occurrence of emergent vegetation rooted in highly organic buoyant mats that rise and fall with changes in water level. Peat-forming floating mires could provide an exceptional tool for environmental studies, since much of their evolution, as well as the changes of the surrounding areas, is recorded in their peat deposits. A complete, 4-m deep peat core was collected in July 2012 from the floating island of Posta Fibreno, a relic mire in the Central Italy. This floating island has a diameter of ca. 30 m, a submerged thickness of about 3 m, and the vegetation is organized in concentric belts, from the Carex paniculata palisade to the Sphagnum centre. Here, some of the southernmost Italian populations of Sphagnum palustre occur. The 14C age dating of macrofossils removed from the sample at 360 cm of depth revealed that the island probably formed more than 500 yrs ago (435±20 yr BP). In the present work, we show preliminary results regarding the evolution of the organic matter along the first, ombrotrophic 100 cm of depth, hoping also to provide some insight into the possible mechanism of the evolution of this floating island. The 100 cm monolith was collected using a Wardenaar corer and cut frozen in 1-cm layers. It consists almost exclusively of Sphagnum mosses, often spaced out, in the top 20-30 cm, by leaves of Populus tremula that annually fell off. This section shows a very low bulk density, ranging from 0.017 and 0.059 g cm-3 (avg. value, 0.03±0.01 g cm-3), an average water content of 96.1±1.1%, and a gravimetric water content ranging between 14.3 and 41.5 gwater gdrypeat-1. The pH of porewaters was in the range 5-5.5. The C content along the profile ranged between 35 and 47% (avg., 41±1%), whereas the N between 0.3 and 0.9% (avg., 0.6±0

Electronic transport behavior of diameter-graded Ag nanowires

International Nuclear Information System (INIS)

Wang Xuewei; Yuan Zhihao

2010-01-01

Ag nanowires with a graded diameter in anodic aluminum oxide (AAO) membranes were fabricated by the direct-current electrodeposition. The Ag nanowires have a graded-change in diameter from 8 to 32 nm, which is matched with the graded-change of the AAO pore diameter. Electronic transport measurements show that there is a transport behavior similar to that of a metal-semiconductor junction along the axial direction in the diameter-graded Ag nanowires. Such a novel homogeneous nanojunction will be of great fundamental and practical significance.

Electronic transport behavior of diameter-graded Ag nanowires

Science.gov (United States)

Wang, Xue Wei; Yuan, Zhi Hao

2010-05-01

Ag nanowires with a graded diameter in anodic aluminum oxide (AAO) membranes were fabricated by the direct-current electrodeposition. The Ag nanowires have a graded-change in diameter from 8 to 32 nm, which is matched with the graded-change of the AAO pore diameter. Electronic transport measurements show that there is a transport behavior similar to that of a metal-semiconductor junction along the axial direction in the diameter-graded Ag nanowires. Such a novel homogeneous nanojunction will be of great fundamental and practical significance.

Lysosome Transport as a Function of Lysosome Diameter

Science.gov (United States)

Bandyopadhyay, Debjyoti; Cyphersmith, Austin; Zapata, Jairo A.; Kim, Y. Joseph; Payne, Christine K.

2014-01-01

Lysosomes are membrane-bound organelles responsible for the transport and degradation of intracellular and extracellular cargo. The intracellular motion of lysosomes is both diffusive and active, mediated by motor proteins moving lysosomes along microtubules. We sought to determine how lysosome diameter influences lysosome transport. We used osmotic swelling to double the diameter of lysosomes, creating a population of enlarged lysosomes. This allowed us to directly examine the intracellular transport of the same organelle as a function of diameter. Lysosome transport was measured using live cell fluorescence microscopy and single particle tracking. We find, as expected, the diffusive component of intracellular transport is decreased proportional to the increased lysosome diameter. Active transport of the enlarged lysosomes is not affected by the increased lysosome diameter. PMID:24497985

The decay of a lambda particle in the 32 cm hydrogen bubble chamber

CERN Multimedia

1960-01-01

This image from 1960 is of real particle tracks formed in CERN's first liquid hydrogen bubble chamber to be used in experiments. It was a tiny detector by today's standards at only 32 cm in diameter. Negatively charged pions with an energy of 16 GeV enter from the left. One of them interacts with a proton in the liquid hydrogen and creates sprays of new particles, including a neutral particle (a lambda) that decays to produce the "V" of two charged particle tracks at the centre. Lower-energy charged particles produced in the interactions spiral in the magnetic field of the chamber. The invention of bubble chambers in 1952 revolutionized the field of particle physics, allowing real particle tracks to be seen and photographed, after releasing the pressure that had kept a liquid above its normal boiling point.

Tree Height-Diameter Relationships in the Alpine Treeline Ecotone Compared with Those in Closed Forests on Changbai Mountain, Northeastern China

Directory of Open Access Journals (Sweden)

Xiaoyu Wang

2017-04-01

Full Text Available Height-diameter relationship is one of the most important stature characteristics of trees. It will change with climatic conditions because height and diameter growth displays different sensitivities to climatic factors such as temperature. Detecting and understanding changes in the stature of trees growing along altitudinal gradients up to their upper limits can help us to better understand the adaptation strategy of trees under global warming conditions. On Changbai Mountain in northeastern China, height-diameter datasets were collected for 2723 Erman’s birch (Betula ermanii Cham. in the alpine treeline ecotone in 2006 and 2013, and for 888 Erman’s birch, spruce (Picea jezoensis Siebold & Zucc. Carr., larch (Larix olgensis A. Henry, and fir (Abies nephrolepis Trautv. ex Maxim. along an altitudinal gradient below the alpine treeline in 2006. These datasets were utilized to explore both changes in the stature of birch at the alpine treeline over time and variations in tree stature of different tree species across altitudes at a given time point (2006. Results showed that birch saplings (<140 cm in height became stunted while birches with a height of >140 cm became more tapered in the alpine treeline ecotone. The stature of birch along the altitudinal gradient became more tapered from 1700 to 1900 m above see level (a.s.l. and then became more stunted from 1900 to 2050 m a.s.l., with 1900 m a.s.l. being the altitudinal inflection point in this pattern. The treeline birch, due to its great temperature magnitude of distribution, displayed higher stature-plasticity in terms of its height-diameter ratio than the lower elevation species studied. The stature of birch is strongly modulated by altitude-related temperature but also co-influenced by other environmental factors such as soil depth and available water, wind speed, and duration and depth of winter snow cover. The high stature-plasticity of birch makes it fare better than other species to

Vegetation and floristics of a lowland tropical rainforest in northeast Australia.

Science.gov (United States)

Tng, David Y P; Apgaua, Deborah M G; Campbell, Mason J; Cox, Casey J; Crayn, Darren M; Ishida, Françoise Y; Laidlaw, Melinda J; Liddell, Michael J; Seager, Michael; Laurance, Susan G W

2016-01-01

Full floristic data, tree demography, and biomass estimates incorporating non-tree lifeforms are seldom collected and reported for forest plots in the tropics. Established research stations serve as important repositories of such biodiversity and ecological data. With a canopy crane setup within a tropical lowland rainforest estate, the 42-ha Daintree Rainforest Observatory (DRO) in Cape Tribulation, northern Australia is a research facility of international significance. We obtained an estimate of the vascular plant species richness for the site, by surveying all vascular plant species from various mature-phase, remnant and open vegetation patches within the site. We also integrate and report the demography and basal areas of trees ≥ 10 cm diameter at breast height (dbh) in a new 1-ha core plot, an extension to the pre-existing forest 1-ha plot under the canopy crane. In addition, we report for the canopy crane plot new demography and basal areas for smaller-size shrubs and treelets subsampled from nine 20 m(2) quadrats, and liana basal area and abundance from the whole plot. The DRO site has an estimated total vascular plant species richness of 441 species, of which 172 species (39%) are endemic to Australia, and 4 species are endemics to the Daintree region. The 2 x 1-ha plots contains a total of 262 vascular plant species of which 116 (1531 individuals) are tree species ≥ 10 cm dbh. We estimate a stem basal area of 34.9 m(2) ha(-1), of which small stems (tree saplings and shrubs analysis shows that DRO forests has a comparatively high stem density and moderate species diversity, due to the influence of cyclones. These data will provide an important foundation for ecological and conservation studies in lowland tropical forest. We present a floristic checklist, a lifeform breakdown, and demography data from two 1-ha rainforest plots from a lowland tropical rainforest study site. We also present a meta-analysis of stem densities and species diversity from

Stem compression reversibly reduces phloem transport in Pinus sylvestris trees.

Science.gov (United States)

Henriksson, Nils; Tarvainen, Lasse; Lim, Hyungwoo; Tor-Ngern, Pantana; Palmroth, Sari; Oren, Ram; Marshall, John; Näsholm, Torgny

2015-10-01

Manipulating tree belowground carbon (C) transport enables investigation of the ecological and physiological roles of tree roots and their associated mycorrhizal fungi, as well as a range of other soil organisms and processes. Girdling remains the most reliable method for manipulating this flux and it has been used in numerous studies. However, girdling is destructive and irreversible. Belowground C transport is mediated by phloem tissue, pressurized through the high osmotic potential resulting from its high content of soluble sugars. We speculated that phloem transport may be reversibly blocked through the application of an external pressure on tree stems. Thus, we here introduce a technique based on compression of the phloem, which interrupts belowground flow of assimilates, but allows trees to recover when the external pressure is removed. Metal clamps were wrapped around the stems and tightened to achieve a pressure theoretically sufficient to collapse the phloem tissue, thereby aiming to block transport. The compression's performance was tested in two field experiments: a (13)C canopy labelling study conducted on small Scots pine (Pinus sylvestris L.) trees [2-3 m tall, 3-7 cm diameter at breast height (DBH)] and a larger study involving mature pines (∼15 m tall, 15-25 cm DBH) where stem respiration, phloem and root carbohydrate contents, and soil CO2 efflux were measured. The compression's effectiveness was demonstrated by the successful blockage of (13)C transport. Stem compression doubled stem respiration above treatment, reduced soil CO2 efflux by 34% and reduced phloem sucrose content by 50% compared with control trees. Stem respiration and soil CO2 efflux returned to normal within 3 weeks after pressure release, and (13)C labelling revealed recovery of phloem function the following year. Thus, we show that belowground phloem C transport can be reduced by compression, and we also demonstrate that trees recover after treatment, resuming C

Local-scale drivers of tree survival in a temperate forest.

Science.gov (United States)

Wang, Xugao; Comita, Liza S; Hao, Zhanqing; Davies, Stuart J; Ye, Ji; Lin, Fei; Yuan, Zuoqiang

2012-01-01

Tree survival plays a central role in forest ecosystems. Although many factors such as tree size, abiotic and biotic neighborhoods have been proposed as being important in explaining patterns of tree survival, their contributions are still subject to debate. We used generalized linear mixed models to examine the relative importance of tree size, local abiotic conditions and the density and identity of neighbors on tree survival in an old-growth temperate forest in northeastern China at three levels (community, guild and species). Tree size and both abiotic and biotic neighborhood variables influenced tree survival under current forest conditions, but their relative importance varied dramatically within and among the community, guild and species levels. Of the variables tested, tree size was typically the most important predictor of tree survival, followed by biotic and then abiotic variables. The effect of tree size on survival varied from strongly positive for small trees (1-20 cm dbh) and medium trees (20-40 cm dbh), to slightly negative for large trees (>40 cm dbh). Among the biotic factors, we found strong evidence for negative density and frequency dependence in this temperate forest, as indicated by negative effects of both total basal area of neighbors and the frequency of conspecific neighbors. Among the abiotic factors tested, soil nutrients tended to be more important in affecting tree survival than topographic variables. Abiotic factors generally influenced survival for species with relatively high abundance, for individuals in smaller size classes and for shade-tolerant species. Our study demonstrates that the relative importance of variables driving patterns of tree survival differs greatly among size classes, species guilds and abundance classes in temperate forest, which can further understanding of forest dynamics and offer important insights into forest management.

Predicting mortality for five California conifers following wildfire

Science.gov (United States)

Sharon M. Hood; Sheri L. Smith; Daniel R. Cluck

2010-01-01

Fire injury was characterized and survival monitored for 5677 trees >25cm DBH from five wildfires in California that occurred between 2000 and 2004. Logistic regression models for predicting the probability of mortality 5-years after fire were developed for incense cedar (Calocedrus decurrens (Torr.) Florin), white fir (Abies concolor (Gord. & Glend.) Lindl. ex...

Experimental study on magnetically insulated transmission line electrode surface evolution process under MA/cm current density

Energy Technology Data Exchange (ETDEWEB)

Zhang, PengFei; Qiu, Aici [State Key Laboratory of Electrical Insulation and Power Equipment, Xi' an Jiaotong University, Xi' an 710049 (China); State Key Laboratory of Intense Pulse Radiation of Simulation and Effect, Northwest Institute of Nuclear Technology, Xi' an 710024 (China); Hu, Yang; Yang, HaiLiang; Sun, Jiang; Wang, Liangping; Cong, Peitian [State Key Laboratory of Intense Pulse Radiation of Simulation and Effect, Northwest Institute of Nuclear Technology, Xi' an 710024 (China)

2016-03-15

The design of high-current density magnetically insulated transmission line (MITL) is a difficult problem of current large-scale Z-pinch device. In particular, a thorough understanding of the MITL electrode surface evolution process under high current density is lacking. On the “QiangGuang-I” accelerator, the load area possesses a low inductance short-circuit structure with a diameter of 2.85 mm at the cathode, and three reflux columns with a diameter of 3 mm and uniformly distributed circumference at the anode. The length of the high density MITL area is 20 mm. A laser interferometer is used to assess and analyze the state of the MITL cathode and anode gap, and their evolution process under high current density. Experimental results indicate that evident current loss is not observed in the current density area at pulse leading edge, and peak when the surface current density reaches MA/cm. Analysis on electrode surface working conditions indicates that when the current leading edge is at 71.5% of the peak, the total evaporation of MITL cathode structure can be realized by energy deposition caused by ohmic heating. The electrode state changes, and diffusion conditions are reflected in the laser interferometer image. The MITL cathode area mainly exists in metal vapor form. The metal vapor density in the cathode central region is higher than the upper limit of laser penetration density (∼4 × 10{sup 21}/cm{sup 3}), with an expansion velocity of ∼0.96 km/s. The metal vapor density in the electrode outer area may lead to evident distortion of fringes, and its expansion velocity is faster than that in the center area (1.53 km/s).

Leveraging the NLM map from SNOMED CT to ICD-10-CM to facilitate adoption of ICD-10-CM.

Science.gov (United States)

Cartagena, F Phil; Schaeffer, Molly; Rifai, Dorothy; Doroshenko, Victoria; Goldberg, Howard S

2015-05-01

Develop and test web services to retrieve and identify the most precise ICD-10-CM code(s) for a given clinical encounter. Facilitate creation of user interfaces that 1) provide an initial shortlist of candidate codes, ideally visible on a single screen; and 2) enable code refinement. To satisfy our high-level use cases, the analysis and design process involved reviewing available maps and crosswalks, designing the rule adjudication framework, determining necessary metadata, retrieving related codes, and iteratively improving the code refinement algorithm. The Partners ICD-10-CM Search and Mapping Services (PI-10 Services) are SOAP web services written using Microsoft's.NET 4.0 Framework, Windows Communications Framework, and SQL Server 2012. The services cover 96% of the Partners problem list subset of SNOMED CT codes that map to ICD-10-CM codes and can return up to 76% of the 69,823 billable ICD-10-CM codes prior to creation of custom mapping rules. We consider ways to increase 1) the coverage ratio of the Partners problem list subset of SNOMED CT codes and 2) the upper bound of returnable ICD-10-CM codes by creating custom mapping rules. Future work will investigate the utility of the transitive closure of SNOMED CT codes and other methods to assist in custom rule creation and, ultimately, to provide more complete coverage of ICD-10-CM codes. ICD-10-CM will be easier for clinicians to manage if applications display short lists of candidate codes from which clinicians can subsequently select a code for further refinement. The PI-10 Services support ICD-10 migration by implementing this paradigm and enabling users to consistently and accurately find the best ICD-10-CM code(s) without translation from ICD-9-CM. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Size and spatial distribution of micropores in SBA-15 using CM-SANS

International Nuclear Information System (INIS)

Pollock, Rachel A.; Walsh, Brenna R.; Fry, Jason A.; Ghampson, Tyrone; Centikol, Ozgul; Melnichenko, Yuri B.; Kaiser, Helmut; Pynn, Roger; Frederick, Brian G.

2011-01-01

Diffraction intensity analysis of small-angle neutron scattering measurements of dry SBA-15 have been combined with nonlocal density functional theory (NLDFT) analysis of nitrogen desorption isotherms to characterize the micropore, secondary mesopore, and primary mesopore structure. The radial dependence of the scattering length density, which is sensitive to isolated surface hydroxyls, can only be modeled if the NLDFT pore size distribution is distributed relatively uniformly throughout the silica framework, not localized in a 'corona' around the primary mesopores. Contrast matching-small angle neutron scattering (CM-SANS) measurements, using water, decane, tributylamine, cyclohexane, and isooctane as direct probes of the size of micropores indicate that the smallest pores in SBA-15 have diameter between 5.7 and 6.2 (angstrom). Correlation of the minimum pore size with the onset of the micropore size distribution provides direct evidence that the shape of the smallest micropores is cylinderlike, which is consistent with their being due to unraveling of the polymer template.

On-line ultrasonic inside-diameter control system for Zircaloy

International Nuclear Information System (INIS)

Tanaka, Y.; Fujii, N.; Komatsu, M.; Kubota, H.

1984-01-01

An ultrasonic inside-diameter (ID) control system was used during the final etching process for producing Zircaloy nuclear fuel cladding tubes. This results in establishing automatic inside-diameter control during etching with an automatic etching system. In this system, the inside-diameter at the center point in the length of each tube is continuously measured with the ultrasonic inside-diameter measuring equipment during the etching process and the etching is automatically stopped by a signal from the control equipment when the inside-diameter reaches the target value. This made the final etching process economical and suitable for large-scale production, having an equal or better level at the inside-diameter of tubes etched with this system than those made by a process controlled by an air-micrometer

Ponderosa pine mortality resulting from a mountain pine beetle outbreak

Science.gov (United States)

William F. McCambridge; Frank G. Hawksworth; Carleton B. Edminster; John G. Laut

1982-01-01

From 1965 to 1978, mountain pine beetles killed 25% of the pines taller than 4.5 feet in a study area in north-central Colorado. Average basal area was reduced from 92 to 58 square feet per acre. Mortality increased with tree diameter up to about 9 inches d.b.h. Larger trees appeared to be killed at random. Mortality was directly related to number of trees per acre and...

Equations of bark thickness and volume profiles at different heights with easy-measurement variables

Energy Technology Data Exchange (ETDEWEB)

Cellini, J. M.; Galarza, M.; Burns, S. L.; Martinez-Pastur, G. J.; Lencinas, M. V.

2012-11-01

The objective of this work was to develop equations of thickness profile and bark volume at different heights with easy-measurement variables, taking as a study case Nothofagus pumilio forests, growing in different site qualities and growth phases in Southern Patagonia. Data was collected from 717 harvested trees. Three models were fitted using multiple, non-lineal regression and generalized linear model, by stepwise methodology, iteratively reweighted least squares method for maximum likelihood estimation and Marquardt algorithm. The dependent variables were diameter at 1.30 m height (DBH), relative height (RH) and growth phase (GP). The statistic evaluation was made through the adjusted determinant coefficient (r2-adj), standard error of the estimation (SEE), mean absolute error and residual analysis. All models presented good fitness with a significant correlation with the growth phase. A decrease in the thickness was observed when the relative height increase. Moreover, a bark coefficient was made to calculate volume with and without bark of individual trees, where significant differences according to site quality of the stands and DBH class of the trees were observed. It can be concluded that the prediction of bark thickness and bark coefficient is possible using DBH, height, site quality and growth phase, common and easy measurement variables used in forest inventories. (Author) 23 refs.

Soil base saturation combines with Beech Bark Disease to influence composition and structure of Sugar Maple-Beech forests in an acid rain-impacted region

Science.gov (United States)

Lawrence, Gregory B.; McDonnell, Todd C.; Sullivan, Timothy J.; Dovciak, Martin; Bailey, Scott W.; Antidormi, Michael; Zarfos, Michael R.

2018-01-01

Sugar maple, an abundant and highly valued tree species in eastern North America, has experienced decline from soil calcium (Ca) depletion by acidic deposition, while beech, which often coexists with sugar maple, has been afflicted with beech bark disease (BBD) over the same period. To investigate how variations in soil base saturation combine with effects of BBD in influencing stand composition and structure, measurements of soils, canopy, subcanopy, and seedlings were taken in 21 watersheds in the Adirondack region of NY (USA), where sugar maple and beech were the predominant canopy species and base saturation of the upper B horizon ranged from 4.4 to 67%. The base saturation value corresponding to the threshold for Al mobilization (16.8%) helped to define the species composition of canopy trees and seedlings. Canopy vigor and diameter at breast height (DBH) were positively correlated (P soils, soil-Ca depletion and BBD may have created opportunities for gap-exploiting species such as red maple and black cherry, whereas in high-base saturation soils, sugar maple dominated the canopy. Where soils were beginning to recover from acidic deposition effects, sugar maple DBH and basal area increased progressively from 2000 to 2015, whereas for beech, average DBH did not change and basal area did not increase after 2010.

Morphometric study of uninvolved rectal mucosa 10 cm and 20 cm away from the malignant tumor.

Science.gov (United States)

Despotović, Sanja Z; Milićević, Novica M; Milosević, Dragoslav P; Despotović, Nebojsa; Erceg, Predrag; Bojić, Bozidar; Bojić, Danijela; Svorcan, Petar; Mihajlović, Gordana; Dorđević, Jelena; Lalić, Ivana M; Milićević, Zivana

2014-02-01

Recently, many details of the interplay between tumor cells and tumor-associated stromal elements leading to the progression of malignant disease were elucidated. In contrast, little is known about the role of uninvolved stromal tissue in the remote surrounding of the malignant tumor. Therefore, we performed a computer-aided morphometric study of rectal mucosa in samples taken 10 cm and 20 cm away from the malignant tumor during endoscopic examination of 23 patients older than 60 years. The samples of rectal mucosa from 10 healthy persons of corresponding age subjected to diagnostic rectoscopy during active screening for asymptomatic cancer were used as control. All structural elements of the rectal mucosa were studied and the number of nucleated cells in the lamina propria per 0.1 mm² of tissue was assessed. Our study revealed a reduced number of cells in the lamina propria of the rectal mucosa 10 cm and 20 cm away from the tumor lesion in both male and female patients. The decreased mucosal height and increased crypt number were registered in female patients 10 cm away from the tumor. The connective tissue of lamina propria showed a disorderly organization: the collagen fibers were frail, loosely arranged and signs of tissue edema were present. Small blood vessels and capillaries were much more frequently seen than in healthy tissue. Our results demonstrate the complex interactions between the cancer and remote mucosal tissue of the affected organ.

RELATIONSHIP BETWEEN CLIMATE VARIABLES, TRUNK GROWTH RATE AND WOOD DENSITY OF Eucalyptus grandis W. Mill ex Maiden TREES

Directory of Open Access Journals (Sweden)

Carlos Roberto Sette Jr

2016-04-01

Full Text Available ABSTRACT Climatic conditions stimulates the cambial activity of plants, and cause significant changes in trunk diameter growth and wood characteristics. The objective of this study was to evaluate the influence of climate variables in the diameter growth rate of the stem and the wood density of Eucalyptus grandis trees in different classes of the basal area. A total of 25 Eucalyptus trees at 22 months of age were selected according to the basal area distribution. Dendrometer bands were installed at the height of 1.30 meters (DBH to monitor the diameter growth every 14 days, for 26 months. After measuring growth, the trees were felled and wood discs were removed at the DBH level to determine the radial density profile through x-ray microdensitometry and then re-scale the average values every 14 days. Climatic variables for the monitoring period were obtained and grouped every 14 days. The effect of the climate variables was determined by maximum and minimum growth periods in assessing trunk growth. These growth periods were related with precipitation, average temperature and relative air humidity. The re-scaled wood density values, calculated using the radial growth of the tree trunks measured accurately with steel dendrometers, enabled the determination of the relationship of small changes in wood density and the effect of the climatic variations and growth rate of eucalyptus tree trunks. A high sensitivity of the wood density to variation in precipitation levels was found.

Study on the role of active radicals on plasma sterilization inside small diameter flexible polymeric tubes

Science.gov (United States)

Mstsuura, Hiroto; Fujiyama, Takatomo; Okuno, Yasuki; Furuta, Masakazu; Okuda, Shuichi; Takemura, Yuichiro

2015-09-01

Recently, atmospheric pressure discharge plasma has gathered attention in various fields. Among them, plasma sterilization with many types of plasma source has studied for decades and its mechanism is still an open question. If active radicals produced in plasma has main contribution of killing bacterias, direct contact of the so-called plasma flame might not be necessary. To confirm this, sterilization inside small diameter flexible polymeric tubes is studied in present work. DBD type plasma jet is produce by flowing helium gas in a glass tube. A long polymeric tube is connected and plasma jet is introduced into it. Plasma flame length depends on helium gas flow rate, but limited to about 10 cm in our experimental condition. E.colis set at the exit plasma source is easily killed during 10 min irradiation. At the tube end (about 20 cm away from plasma source exit), sterilization is possible with 30 min operation. This result shows that active radical is produced with helium plasma and mist contained in sample, and it can be transferred more than 20 cm during it life time. More plasma diagnostic data will also be shown at the conference. This work was partially supported by the ''ZE Research Program, IAE(ZE27B-4).

Laser direct writing using submicron-diameter fibers.

Science.gov (United States)

Tian, Feng; Yang, Guoguang; Bai, Jian; Xu, Jianfeng; Hou, Changlun; Liang, Yiyong; Wang, Kaiwei

2009-10-26

In this paper, a novel direct writing technique using submicron-diameter fibers is presented. The submicron-diameter fiber probe serves as a tightly confined point source and it adopts micro touch mode in the process of writing. The energy distribution of direct writing model is analyzed by Three-Dimension Finite-Difference Time-Domain method. Experiments demonstrate that submicron-diameter fiber direct writing has some advantages: simple process, 350-nm-resolution (lower than 442-nm-wavelength), large writing area, and controllable width of lines. In addition, by altering writing direction of lines, complex submicron patterns can be fabricated.

Angiographic Evaluation of Carotid Artery Grafting with Prefabricated Small-Diameter, Small-Intestinal Submucosa Grafts in Sheep

International Nuclear Information System (INIS)

Pavcnik, Dusan; Obermiller, Josef; Uchida, Barry T.; Van Alstine, William; Edwards, James M.; Landry, Gregory J.; Kaufman, John A.; Keller, Frederick S.; Roesch, Josef

2009-01-01

The purpose of this study was to report the longitudinal angiographic evaluation of prefabricated lyophilized small-intestinal submucosa (SIS) grafts placed in ovine carotid arteries and to demonstrate a variety of complications that developed. A total of 24 grafts, 10 cm long and 6 mm in diameter, were placed surgically as interposition grafts. Graft patency at 1 week was evaluated by Doppler ultrasound, and angiography was used for follow-up at 1 month and at 3 to 4 months. A 90% patency rate was found at 1 week, 65% at 1 month, and 30% at 3 to 4 months. On the patent grafts, angiography demonstrated a variety of changes, such as anastomotic stenoses, graft diffuse dilations and dissections, and aneurysm formation. These findings have not been previously demonstrated angiographically by other investigators reporting results with small-diameter vessel grafts made from fresh small-intestinal submucosa (SIS). The complications found were partially related to the graft construction from four SIS layers. Detailed longitudinal angiographic study should become an essential part of any future evaluation of small-vessel SIS grafting.

Growth and development of moringa (Moringa oleifera L. stem cuttings as affected by diameter magnitude, growth media, and indole-3-butyric acid

Directory of Open Access Journals (Sweden)

Shamsuddeen Rufai

2016-12-01

Full Text Available The acknowledged status of Moringa oleifera L. in sub-Saharan Africa, especially western Africa, has of recent accorded it the significance of being a good source of income to a large segment of many of its populace. Intensification of research into the realization of its full economic potential will be of utmost value to impoverished societies globally. One way to achieve this is the full exploration of all possible means that will facilitate its successful growth, propagation, and domestication. Even though it can be successfully raised through seeds, the high level outcrossing (64.3% observed is a hindrance to realization of true to type trees. Vegetative propagation can be employed as an option to tackle the noted limitation, ease the cultivation process, and achieve the required realization of its economic potential. Our trial was carried out to study the influence of two growth media and three levels of indole 3-butyric acid (IBA on root and shoot development in cuttings taken from a coppiced moringa tree existent in Universiti Putra Malaysia. Semi-hardwood cuttings of moringa, of between 20 and 30 mm diameter, cut into 25 cm length, were obtained, rinsed with a fungicide, then dipped, through their basal portion, inside varying levels (0, 1000, 2000, and 3000 ppm of indole-3-butyric acid (IBA for between 7 and 10 seconds. The treated cuttings were then transplanted into a polyethylene bags (23 cm × 36 cm, containing two growth media - a munchong series soil (M and a combination of a munchong series soil thoroughly mixed with biochar (MB in a 3:1 ratio sequence. The trial was conducted inside a shade house where the humidity of the experimental area was manipulated through a regular daily manual hand sprinkling. Plant height, percentage of primary branch produced, leaf area, and dry matter (DM were found to be significantly (P<0.05 influenced by variation in stem diameter magnitude, while the diameter of the primary branch and spad

Measurements of higher order modes in a 30 cm long X-band structure

International Nuclear Information System (INIS)

Xiao, L.; Liang, Y.; Tong, D.; Zhang, H.

2001-01-01

The use of a cage of metallic wires as a bead is proposed to measure the higher order modes (HOMs) in an X-band accelerating structure. These long thin wires can isolate the longitudinal electric field component from other field components and produce sufficient frequency shift in bead-pull measurements. In the setup described in this paper, the bead is made by sputtering silver film onto a thin nylon line through a specially designed fixture. The cage has a size of approximately 0.5 mm in diameter, 2 mm in length and more than six metallic wires of less than 0.1 mm in width. The fabrication and calibration of the cage are described. The longitudinal electric fields of the lowest passband dipole mode TM 110 in a 30 cm long X-band structure are measured by bead-pull measurements. Results are compared with the calculated ones obtained from URMELT-code

Normal ureteral diameter in infancy and childhood

International Nuclear Information System (INIS)

Hellstroem, M.; Hjaelmaas, K.; Jacobsson, B.; Jodal, U.; Oden, A.; Oestra Sjukhuset, Goeteborg; Oestra Sjukhuset, Goeteborg; Goeteborg Univ.

1985-01-01

Ureteral diameters were estimated on films from intravenous urography in 194 children (100 boys and 94 girls) aged 0-16 years. Children with signs of urinary tract infection, calculi, obstruction, duplication or malformation were excluded. Films obtained without abdominal compression were used for measurements, including only ureters visualized over 50 per cent of their lengths. A good correlation was demonstrated between ureteral diameter and age and between ureteral diameter and the length of a segment of the lumbar spine. The widest part of the ureter was most often located just above the crossing of the iliac vessels. The right ureter was slightly wider than the left one. No difference between boys and girls was noted. The results are in good agreement with those of others obtained at autopsy. Bearing in mind the possible physiologic variations, it would seem that measuring the ureteral diameter can be of value for a more objective differentiation between dilated and non-dilated ureters. (orig.)

[Growth effect of eucalyptus-acacia mixed plantation in South China].

Science.gov (United States)

Yang, Zeng-Jiang; Xu, Da-Ping; Chen, Wen-Ping; Huang, Lie-Jian; Li, Shang-Jun; Chen, Yuan

2009-10-01

Eucalyptus U6 and Acacia crassicarpa were mixed planted with different ratios and modes to investigate the growth parameters of the two tree species. In the 2-3 years old mixed plantation, the wind-throw of A. crassicarpa decreased markedly with increasing ratio of Eucalyptus U6, the decrement being 26.14% when the Eucalyptus U6/A. crassicarpa ratio was 3 : 1, but the survival rates of Eucalyptus U6 and A. crassicarpa had no significant difference under different planting modes. Mixed planting retarded the A. crassicarpa growth to some extent, with the DBH being 90% of that in pure A. crassicarpa stand. The mixed planting had little effects on the height growth of Eucalyptus U6, but promoted its DBH growth markedly, and the beneficial effect increased with increasing ratio of A. crassicarpa. In the 6 years old 1 : 1 Eucalyptus U6/A. crassicarpa plantation, the Eucalyptus U6 individuals with DBH > 15 cm occupied 32.1%; while in pure Eucalyptus U6 stand, they only accounted for 5.83%. Mixed planting with 2 : 1 Eucalyptus U6/A. crassicarpa could obtain a maximum total biomass of 198.8 m3 x hm(-2), which was 118.8% of the total biomass in pure Eucalyptus U6 stand, or 169.9% of that in pure A. crassicarpa stand. Mixture of Eucalyptus with Acacia would be a good choice to produce Eucalyptus trees with larger DBH.

Diameter Growth, Biological Rotation Age and Biomass of Chinese Fir in Burning and Clearing Site Preparations in Subtropical China

Directory of Open Access Journals (Sweden)

Hua Zhou

2016-08-01

Full Text Available Sustained forest management of Cunninghamia lanceolata (Chinese fir plantations in subtropical China is restricted by the limited availability of quantitative data. This study combines inventory data and tree-ring analysis of Chinese fir from natural and plantation forests that were subjected to controlled burning or brush clearing site preparations. Inter-annual variation of Chinese fir tree-ring widths were measured for the controlled burning, brush clearing and natural forest sites. The mean annual diametric growth of Chinese fir was 0.56 cm·year−1 for the natural forest, 0.80 cm·year−1 for the brush clearing site and 1.10 cm·year−1 for the controlled burning site. The time needed to reach the minimum cutting/logging diameter of 15 cm was 14 years in the controlled burning site, 19 years in the brush clearing site and >40 years in the natural forest. The biological rotation ages for the burning, cutting and natural forest sites were 15, 26 and >100 years, respectively. The total aboveground biomasses for the burning and clearing sites were 269.8 t·ha−1 and 252 t·ha−1, respectively. These results suggest that the current 25-year cutting cycle greatly underestimates the growth rate of Chinese fir plantations.

Diâmetro de estacas e substratos na propagação vegetativa de maniçoba, Manihot glaziovii Muell. Arg Diameter of cuttings and substrates in the vegetative propagation of maniçoba Manihot glaziovii Muell. Arg

Directory of Open Access Journals (Sweden)

Leonardo Elias Ferreira

2010-09-01

Full Text Available Objetivou-se com este trabalho estudar a influência do diâmetro das estacas e dos substratos na propagação vegetativa de maniçoba, Manihot glaziovii Muell. Arg. Utilizou-se o delineamento em blocos casualizados em esquema fatorial 10 x 3, sendo 10 substratos e 3 diâmetros de estacas, totalizando 30 tratamentos, oriundos das combinações entre substratos e diâmetros de estacas, com 4 repetições e 8 estacas por parcela. Os diâmetros das estacas corresponderam a: 0,5 a 1,0 cm (D1; 1,1 a 2,0 cm (D2 e 2,1 a 3,0 cm (D3. Foram utilizados 10 substratos: terra (S1; areia (S2; terra+areia: 1:1 (S3; terra+areia: 2:1 (S4; terra+areia: 1:2 (S5; terra+esterco: 1:1 (S6; areia+esterco: 1:1 (S7; terra+esterco: 2:1 (S8; areia+esterco: 2:1 (S9 e terra+areia+esterco: 1:1:1 (S10. As estacas lenhosas foram retiradas de plantas matrizes em repouso vegetativo, com comprimento de 25 cm e base cortada em bisel. Avaliou-se: percentual de estacas enraizadas; número de raízes; número de brotações; diâmetro e comprimento das brotações; número de folhas; massa seca das brotações e massa seca das raízes, obtidos aos 70 dias após instalação do experimento. Os melhores resultados para todas as variáveis estudadas foram obtidos com estacas de diâmetros entre 1,1 a 2,0 cm e entre 2,1 a 3,0 cm, com substratos que incluíram areia + esterco na sua composição. Tais tratamentos proporcionaram percentagens de enraizamento da ordem de 70 a 80%.This study aims to evaluate substrates and cuttings diameter influence in the vegetative propagation of Manihot glaziovii Muell.Arg. A design in randomized blocks using a 10 x 3 factorial scheme was used, being 10 substrates and 3 cuttings diameter, totaling 30 treatments, from the combinations between substrates and cuttings diameter, with 4 replications and 8 cuttings per plot. Diameters corresponded: 0.5 to 1.0 cm (D1; 1.1 to 2.0 cm (D2 and 2.1 to 3.0 cm (D3. Substrates used were: soil (S1; sand (S2; soil + sand: 1

Self-assembling nano-diameter needlelike pinning centers in YBCO, utilizing a foreign element dopant

Energy Technology Data Exchange (ETDEWEB)

Sawh, Ravi-Persad [Texas Center for Superconductivity and Physics Department, University of Houston, 632 Science and Research Bldg 1, Houston Texas 77204-5005 (United States); Weinstein, Roy [Texas Center for Superconductivity and Physics Department, University of Houston, 632 Science and Research Bldg 1, Houston Texas 77204-5005 (United States); Obot, Victor [Department of Mathematics, Texas Southern University, 3100 Cleburne St, Houston Texas 77004-4597 (United States); Parks, Drew [Texas Center for Superconductivity and Physics Department, University of Houston, 632 Science and Research Bldg 1, Houston Texas 77204-5005 (United States); Gandini, Alberto [Texas Center for Superconductivity and Physics Department, University of Houston, 632 Science and Research Bldg 1, Houston Texas 77204-5005 (United States); Skorpenske, Harley [Texas Center for Superconductivity and Physics Department, University of Houston, 632 Science and Research Bldg 1, Houston Texas 77204-5005 (United States)

2006-06-01

Although pinning centers created by irradiation presently produce the highest J{sub c}, it is probable that ultimately these will be emulated by chemical pinning centers. The best pinning centers produced by irradiation nevertheless provide guidelines for desirable morphology of chemical pinning structures. The highest J{sub c} produced earlier in textured HTS was obtained using isotropic high-energy ions produced by fission of {sup 235}U. This so-called U/n process produces pinning centers of diameter {<=} 4.5 nm, with an effective length of {approx}2.7 {mu}m. Maximum J{sub c} occurs for pinning center density of {approx}10{sup 10} cm{sup -3}. We use this as a model for desired chemical pinning centers. Our approach to introducing chemical pinning centers has been to produce precipitates within the HTS containing elements not native to the HTS, and to seek needlelike (columnar) deposits of small diameter. We report here on the formation of needlelike or columnar deposits in textured Y123 containing a dopant foreign to Y123. It serves as a demonstration that self-assembling nanometer diameter columns utilizing a dopant foreign to the HTS system are a feasible goal. These deposits, however, do not fully meet the ultimate requirements of pinning centers because the desired deposits should be smaller. The self-assembling columns formed contain titanium, are {approx}500 nm in diameter, and up to 10 {mu}m long. The size and morphology of the deposits vary with the mass of admixed Ti dopant. J{sub c} is decreased for small dopant mass. At larger dopant masses needlelike precipitates form, and J{sub c} increases again. A small range of mass of admixed Ti exists in which J{sub c} is enhanced by pinning. In the range of admixed Ti mass studied in these experiments there is a negligible effect on T{sub c}. Magnetization studies of J{sub c} are also reported.

Diameter Control and Photoluminescence of ZnO Nanorods from Trialkylamines

Directory of Open Access Journals (Sweden)

Tamar Andelman

2007-01-01

Full Text Available A novel solution method to control the diameter of ZnO nanorods is reported. Small diameter (2-3 nm nanorods were synthesized from trihexylamine, and large diameter (50–80 nm nanorods were synthesized by increasing the alkyl chain length to tridodecylamine. The defect (green emission of the photoluminescence (PL spectra of the nanorods varies with diameter, and can thus be controlled by the diameter control. The small ZnO nanorods have strong green emission, while the large diameter nanorods exhibit a remarkably suppressed green band. We show that this observation supports surface oxygen vacancies as the defect that gives rise to the green emission.

Automatic determination of trunk diameter, crown base and height of scots pine (Pinus Sylvestris L.) Based on analysis of 3D point clouds gathered from multi-station terrestrial laser scanning. (Polish Title: Automatyczne okreslanie srednicy pnia, podstawy korony oraz wysokosci sosny zwyczajnej (Pinus Silvestris L.) Na podstawie analiz chmur punktow 3D pochodzacych z wielostanowiskowego naziemnego skanowania laserowego)

Science.gov (United States)

Ratajczak, M.; Wężyk, P.

2015-12-01

Rapid development of terrestrial laser scanning (TLS) in recent years resulted in its recognition and implementation in many industries, including forestry and nature conservation. The use of the 3D TLS point clouds in the process of inventory of trees and stands, as well as in the determination of their biometric features (trunk diameter, tree height, crown base, number of trunk shapes), trees and lumber size (volume of trees) is slowly becoming a practice. In addition to the measurement precision, the primary added value of TLS is the ability to automate the processing of the clouds of points 3D in the direction of the extraction of selected features of trees and stands. The paper presents the original software (GNOM) for the automatic measurement of selected features of trees, based on the cloud of points obtained by the ground laser scanner FARO. With the developed algorithms (GNOM), the location of tree trunks on the circular research surface was specified and the measurement was performed; the measurement covered the DBH (l: 1.3m), further diameters of tree trunks at different heights of the tree trunk, base of the tree crown and volume of the tree trunk (the selection measurement method), as well as the tree crown. Research works were performed in the territory of the Niepolomice Forest in an unmixed pine stand (Pinussylvestris L.) on the circular surface with a radius of 18 m, within which there were 16 pine trees (14 of them were cut down). It was characterized by a two-storey and even-aged construction (147 years old) and was devoid of undergrowth. Ground scanning was performed just before harvesting. The DBH of 16 pine trees was specified in a fully automatic way, using the algorithm GNOM with an accuracy of +2.1%, as compared to the reference measurement by the DBH measurement device. The medium, absolute measurement error in the cloud of points - using semi-automatic methods "PIXEL" (between points) and PIPE (fitting the cylinder) in the FARO Scene 5.x

Inferring diameters of spheres and cylinders using interstitial water.

Science.gov (United States)

Herrera, Sheryl L; Mercredi, Morgan E; Buist, Richard; Martin, Melanie

2018-06-04

Most early methods to infer axon diameter distributions using magnetic resonance imaging (MRI) used single diffusion encoding sequences such as pulsed gradient spin echo (SE) and are thus sensitive to axons of diameters > 5 μm. We previously simulated oscillating gradient (OG) SE sequences for diffusion spectroscopy to study smaller axons including the majority constituting cortical connections. That study suggested the model of constant extra-axonal diffusion breaks down at OG accessible frequencies. In this study we present data from phantoms to test a time-varying interstitial apparent diffusion coefficient. Diffusion spectra were measured in four samples from water packed around beads of diameters 3, 6 and 10 μm; and 151 μm diameter tubes. Surface-to-volume ratios, and diameters were inferred. The bead pore radii estimates were 0.60±0.08 μm, 0.54±0.06 μm and 1.0±0.1 μm corresponding to bead diameters ranging from 2.9±0.4 μm to 5.3±0.7 μm, 2.6±0.3 μm to 4.8±0.6 μm, and 4.9±0.7 μm to 9±1 μm. The tube surface-to-volume ratio estimate was 0.06±0.02 μm -1 corresponding to a tube diameter of 180±70 μm. Interstitial models with OG inferred 3-10 μm bead diameters from 0.54±0.06 μm to 1.0±0.1 μm pore radii and 151 μm tube diameters from 0.06±0.02 μm -1 surface-to-volume ratios.

Enteroclysis in adult celiac disease: assessment of jejuno-ileal diameter and of number of folds

International Nuclear Information System (INIS)

La Seta, F.; Bucellato, A.; Cabibbo, L.; Cottone, M.; Salerno, G.; Dardanoni, G.

1991-01-01

The authors retrospectively reviewed the radiographic findings (obtained with double-contrast small bowel enema) of 27 patients with adult celiac disease and of 27 healthy control subjects. Two parameters were measurated in two different locations; lumen diameter and number of folds both in proximal jejunum and in the distal ileum. Statistical differences in mean values between cases and controls were calculated, and correlations between the four variables were assessed. Sensitivity, specificity and their 95% confidence limits were calculated for all the variables. The best parameter in discriminating cases from controls seems to be the caliber of distal ileum (>3 cm), with 93% sensitivity and 100% specificity. The value of the obtained results is discussed

Phytossociology of wood community in Seasonal Dry Montane Forest in Paraiba, Brazil

Directory of Open Access Journals (Sweden)

Maria do Carmo Learth Cunha

2013-06-01

Full Text Available The Pico do Jabre Seasonally Dry Montane Forest in Paraiba state, Brazil, the highest regional elevation, 1197 m, distant 360 km the sea was assessed aiming to survey its phytosociology and woody structure. In 36 systematic sampling plots, 10x50m, individuals, Dbh > 4.8cm, had their diameters and height measured. Botanical samples were collected during five years and vouchers were deposited at the Paraiba Federal University Herbaria (JPB. It was found 2050 trees distributed in 64 species of 51 genera of 31 families, which accounted for 1138 ind.ha-1 and 22.45 m2.ha -1. Diversity and equability were assessed as H' = 3.17 nats.ind-1 and J' = 0.76 similar to some others regional seasonally dry montane forest communities. Malpighiaceae, Myrtaceae, Erythroxylaceae, Vochysiaceae, Celastraceae, Rutaceae, Sapindaceae e Fabaceae-Faboideae stood out and summed 66.72% of the total VI. Byrsonima nitidifolia, Eugenia ligustrina, Calisthene microphylla, Maytenus distichophylla and Erythroxylum mucronatum species accounted for 120.79 (40.3% of the total VI. B. nitidifolia ecological dominance is firstly reported in the Brazilian northeast region.

Regeneration of five commercially-valuable tree species after experimental logging in an Amazonian forest

Directory of Open Access Journals (Sweden)

Lima Albertina Pimentel

2002-01-01

Full Text Available This study investigated the regeneration variation of five commercially valuable tree species in relation to different intensities of felling in fourteen 4-ha plots in an area under experimental forest management. This experiment was carried out in a typical Amazonian tropical forest sample on "terra-firme," in Manaus (AM. Plots were logged 7 and 8 years (1987 and 1988, or 3 years (1993 before the study. All trees with height greater than 2 m, and diameter at breast height (DBH smaller than 10 cm were measured. Only Aniba hostmanniana, Ocotea aciphylla, Licaria pachycarpa, Eschweilera coriacea and Goupia glabra were sufficiently common for individual analyses. These species have high timber values in the local market. Eight years after logging, the species responded differently to logging intensities. The numbers of individuals of Goupia glabra and Aniba hostmanniana were positively related to the intensity of logging, while Ocotea aciphylla, Licaria pachycarpa, and Eschweilera coriacea showed no statistically significant response. In the most recently (1993 logged areas, Goupia glabra and Aniba hostmanniana had higher numbers of individuals than the control plots.

Measuring Electrospun Nanofibre Diameter: a Novel Approach

International Nuclear Information System (INIS)

Ziabari, M.; Mottaghitalab, V.; Haghi, A. K.; McGovern, S. T.

2008-01-01

A new method based on image analysis for electrospun nanofibre diameter measurement is presented. First, the SEM micrograph of the nanofibre web obtained by electrospinning process is converted to binary image using local thresholding method. In the next step, skeleton and distance transformed image are generated. Then, the intersection points which bring about untrue measurements are identified and removed from the skeleton. Finally, the resulting skeleton and distance transformed image are used to determine fibre diameter. The method is evaluated by a simulated image with known characteristics generated by ?-randomness procedure. The results indicate that this approach is successful in making fast, accurate automated measurements of electrospun fibre diameters. (cross-disciplinary physics and related areas of science and technology)

2-cm versus 4-cm surgical excision margins for primary cutaneous melanoma thicker than 2 mm: a randomised, multicentre trial

DEFF Research Database (Denmark)

Gillgren, Peter; Drzewiecki, Krzysztof T; Niin, Marianne

2011-01-01

Optimum surgical resection margins for patients with clinical stage IIA-C cutaneous melanoma thicker than 2 mm are controversial. The aim of the study was to test whether survival was different for a wide local excision margin of 2 cm compared with a 4-cm excision margin.......Optimum surgical resection margins for patients with clinical stage IIA-C cutaneous melanoma thicker than 2 mm are controversial. The aim of the study was to test whether survival was different for a wide local excision margin of 2 cm compared with a 4-cm excision margin....

Análise de danos de colheita de madeira em floresta tropical úmida sob regime de manejo florestal sustentado na Amazônia ocidental Analysis of logging damage in a moist tropical forest under sustained management in western Amazon

Directory of Open Access Journals (Sweden)

Alberto Carlos Martins Pinto

2002-08-01

Full Text Available Procurou-se identificar, qualificar e quantificar a intensidade de danos causados pela colheita florestal em uma área com floresta primária explorada (FPE, tendo com testemunha uma área com floresta primária não-explorada (FPNE, com 202 e 204 ha, respectivamente. Na FPNE, foram avaliados os danos decorrentes de causas naturais. As áreas de FPE e de FPNE localizam-se no município de Manicoré, Estado do Amazonas. Realizou-se o inventário utilizando o método de amostragem aleatória, em ambas as áreas. As amostragens foram executadas em dois níveis de inclusão de DAP. No nível I foram instaladas cinco parcelas de 100 x 100 m (1 ha, onde foram inventariadas todas as árvores com DAP > ou = 15 cm. No nível II, as parcelas do nível I foram divididas sistematicamente em subparcelas de 10 x 10 m (100 m², tendo sido amostradas aleatoriamente cinco subparcelas por parcela do nível I, totalizando 2.500 m², onde foram inventariados todos os indivíduos (varejões com 5,0 The objective of this work was to identify, qualify and quantify the intensity of damage from natural causes and forest harvest in a non-exploited old growth forest (FPNE and in a harvested old growth forest (FPE. The studied area is located in the counties of Manicoré, Amazon, Brazil, with an area of 204 ha of FPNE and 202 ha of FPE, respectively. The inventory was carried out applying the randomized sampling method, in both areas. Sampling collection was carried out in two levels of approach. In level I, five plots of 100 x 100 m (1 ha were established, and the individuals with DBH > or = 15 cm were evaluated. In level II, the plots of level I were systematically subdivided in subplots of 10 x 10 m (100 m², being randomly sampled only five of these per plot of level I, with an area of 2,500 m², where all the individuals between 5.0 <= DBH < 15 cm (large samplings were evaluated. The assessment of damage caused to the remaining trees indicate that only 10% of the

Allometry of Sapwood Depth in Five Boreal Trees

OpenAIRE

M. Rebeca Quiñonez-Piñón; Caterina Valeo

2017-01-01

This paper analyzes sapwood variability and allometry within individuals of Populus tremuloides, Pinus contorta, Pinus banksiana, Picea mariana, and Picea glauca. Outside bark diameter at breast height (DBH) and sapwood depth (sd) in four cardinal directions were measured in individuals in stands in Alberta and Saskatchewan, Canada. The microscopical analysis of wood anatomy was used to measure sd, and the error associated with the measures was observed. Sapwood allometry analyses examined th...

Development and evaluation of elastomeric hollow fiber membranes as small diameter vascular graft substitutes

Energy Technology Data Exchange (ETDEWEB)

Mercado-Pagán, Ángel E.; Kang, Yunqing [Department of Orthopedic Surgery, Stanford University, Stanford, CA (United States); Findlay, Michael W. [Department of Plastic and Reconstructive Surgery, Stanford University, Stanford, CA (United States); University of Melbourne Department of Surgery, Royal Melbourne Hospital, Parkville, VIC (Australia); Yang, Yunzhi, E-mail: ypyang@stanford.edu [Department of Orthopedic Surgery, Stanford University, Stanford, CA (United States); Department of Materials Science and Engineering, Stanford University, Stanford, CA (United States)

2015-04-01

Engineering of small diameter (< 6 mm) vascular grafts (SDVGs) for clinical use remains a significant challenge. Here, elastomeric polyester urethane (PEU)-based hollow fiber membranes (HFMs) are presented as an SDVG candidate to target the limitations of current technologies and improve tissue engineering designs. HFMs are fabricated by a simple phase inversion method. HFM dimensions are tailored through adjustments to fabrication parameters. The walls of HFMs are highly porous. The HFMs are very elastic, with moduli ranging from 1–4 MPa, strengths from 1–5 MPa, and max strains from 300–500%. Permeability of the HFMs varies from 0.5–3.5 × 10{sup −6} cm/s, while burst pressure varies from 25 to 35 psi. The suture retention forces of HFMs are in the range of 0.8 to 1.2 N. These properties match those of blood vessels. A slow degradation profile is observed for all HFMs, with 71 to 78% of the original mass remaining after 8 weeks, providing a suitable profile for potential cellular incorporation and tissue replacement. Both human endothelial cells and human mesenchymal stem cells proliferate well in the presence of HFMs up to 7 days. These results demonstrate a promising customizable PEU HFMs for small diameter vascular repair and tissue engineering applications. - Highlights: • Hollow fiber membranes (HFMs) were fabricated and evaluated. • HFM properties could be tailored through adjustments to fabrication parameters. • Properties could match or exceed those of blood vessels. • HFM showed excellent compatibility in vitro. • HFMs have the potential to be used for small diameter vascular grafts.

Development and evaluation of elastomeric hollow fiber membranes as small diameter vascular graft substitutes

International Nuclear Information System (INIS)

Mercado-Pagán, Ángel E.; Kang, Yunqing; Findlay, Michael W.; Yang, Yunzhi

2015-01-01

Engineering of small diameter (< 6 mm) vascular grafts (SDVGs) for clinical use remains a significant challenge. Here, elastomeric polyester urethane (PEU)-based hollow fiber membranes (HFMs) are presented as an SDVG candidate to target the limitations of current technologies and improve tissue engineering designs. HFMs are fabricated by a simple phase inversion method. HFM dimensions are tailored through adjustments to fabrication parameters. The walls of HFMs are highly porous. The HFMs are very elastic, with moduli ranging from 1–4 MPa, strengths from 1–5 MPa, and max strains from 300–500%. Permeability of the HFMs varies from 0.5–3.5 × 10 −6 cm/s, while burst pressure varies from 25 to 35 psi. The suture retention forces of HFMs are in the range of 0.8 to 1.2 N. These properties match those of blood vessels. A slow degradation profile is observed for all HFMs, with 71 to 78% of the original mass remaining after 8 weeks, providing a suitable profile for potential cellular incorporation and tissue replacement. Both human endothelial cells and human mesenchymal stem cells proliferate well in the presence of HFMs up to 7 days. These results demonstrate a promising customizable PEU HFMs for small diameter vascular repair and tissue engineering applications. - Highlights: • Hollow fiber membranes (HFMs) were fabricated and evaluated. • HFM properties could be tailored through adjustments to fabrication parameters. • Properties could match or exceed those of blood vessels. • HFM showed excellent compatibility in vitro. • HFMs have the potential to be used for small diameter vascular grafts

Numerical investigation on effect of riser diameter and inclination on system parameters in a two-phase closed loop thermosyphon solar water heater

International Nuclear Information System (INIS)

Aung, Nay Zar; Li, Songjing

2013-01-01

Highlights: • Optimum inclination for maximum heat flux changes with latitude of location. • Optimum inclination for maximum heat flux also changes local solar time. • Maximum flow rate increases with increasing of riser tube size. • Maximum mass flow rate is obtained at different inclinations for different risers. • Length of two-phase region depends on inclination angles but not riser tube size. - Abstract: In this work, the effect of riser diameter and its inclination angle on system parameters in a two-phase closed loop thermosyphon solar water heater has been numerically investigated. Here, receivable heat flux by the collector, circulating mass flow rate, driving pressure, total pressure drop, heat transfer coefficient in risers and collector efficiency are defined as system parameters. For this aim, a model of two-phase thermosyphon solar water heater that is acceptable for various inclinations is presented and variations of riser diameter and inclination are considered. The riser tube size is varied from 1.25 cm to 2.5 cm with inclination range 2–75°. The system absolute pressure is set as 3567 Pa and water is chosen as working fluid. The results show that higher inclination angle is required for higher latitude location to obtain maximum solar heat flux. At local solar noon of 21.996 north latitude, the optimum inclination angle increases in the range of 24–44° with increasing of riser diameter giving maximum circulating mass flow rate from 0.02288 kg/s to 0.03876 kg/s. The longer two-phase heat transfer characteristics can be obtained at smaller inclination angles and mass flow rate for all riser tube sizes. Therefore, it is observed that the optimum inclination angles and diameters for solar heat flux, circulating mass flow rate and heat transfer coefficient in two-phase thermosyphon systemdo not coincide. From this work, better understanding and useful information are provided for constructing two-phase thermosyphon solar heaters

Catalytic growth of carbon nanotubes with large inner diameters

Directory of Open Access Journals (Sweden)

WEI REN ZHONG

2005-02-01

Full Text Available Carbon nanotubes (2.4 g/g catalyst, with large inner diameters were successfully synthesized through pyrolysis of methane on a Ni–Cu–Al catalyst by adding sodium carbonate into the carbon nanotubes growth system. The inner diameter of the carbon nanotubes prepared by this method is about 20–60 nm, while their outer diameter is about 40–80 nm. Transmission electron microscopy and X-ray diffraction were employed to investigate the morphology and microstructures of the carbon nanotubes. The analyses showed that these carbon nanotubes have large inner diameters and good graphitization. The addition of sodium carbonate into the reaction system brings about a slight decrease in the methane conversion and the yield of carbon. The experimental results showed that sodium carbonate is a mildly toxic material which influenced the catalytic activity of the Ni–Cu–Al catalyst and resulted in the formation of carbon nanotubes with large inner diameters. The growth mechanism of the carbon nanotubes with large inner diameters is discussed in this paper.

On the diameter of dot-critical graphs

Directory of Open Access Journals (Sweden)

Doost Ali Mojdeh

2009-01-01

Full Text Available A graph G is \\(k\\-dot-critical (totaly \\(k\\-dot-critical if \\(G\\ is dot-critical (totaly dot-critical and the domination number is \\(k\\. In the paper [T. Burtona, D. P. Sumner, Domination dot-critical graphs, Discrete Math, 306 (2006, 11-18] the following question is posed: What are the best bounds for the diameter of a \\(k\\-dot-critical graph and a totally \\(k\\-dot-critical graph \\(G\\ with no critical vertices for \\(k \\geq 4\\? We find the best bound for the diameter of a \\(k\\-dot-critical graph, where \\(k \\in\\{4,5,6\\}\\ and we give a family of \\(k\\-dot-critical graphs (with no critical vertices with sharp diameter \\(2k-3\\ for even \\(k \\geq 4\\.

On the performance of small diameter gas cyclones

International Nuclear Information System (INIS)

Halasz, Marcos Roberto Teixeira

2002-02-01

Small diameter cyclones represent a potential alternative for the removal of small diameter particles from gaseous mixtures as well as the environmental control of their emission. In order to establish feasible configurations of a small diameter cyclone applied in the separation of solid particles dispersed in a gas and considering a large quantify of experimental data in literature, neural networks were used to estimate the equipment grade efficiency and pressure drop. In order to evaluate a performance of many small diameters configurations and analysis was carried of parametrical sensibility which determines the most important variables on separation efficiency determination. A set of experimental runs was carried out in a lab-scale mini-cyclone in order to obtain the separation efficiency and pressure drop for different configurations, and evaluate the feasibility of coupling a post-cyclone device to improve the equipment overall performance. The cyclones used presented diameters of 0.03 and 0.05 m and the remaining dimensions varied proportionally about those found in Stairmand high-efficiency cyclones. Experimental separation efficiencies up to 99% were obtained in this work. These results confirm the feasibility of the experimental set-up configuration proposed. (author)

Oxygen isotope systematics of chondrules in the Murchison CM2 chondrite and implications for the CO-CM relationship

Science.gov (United States)

Chaumard, Noël; Defouilloy, Céline; Kita, Noriko T.

2018-05-01

High-precision oxygen three-isotope measurements of olivine and pyroxene were performed on 29 chondrules in the Murchison CM2 chondrite by secondary ion mass spectrometry (SIMS). The oxygen isotope ratios of analyzed chondrules all plot very close to the primitive chondrule minerals (PCM) line. In each of 24 chondrules, the olivine and/or pyroxene grains analyzed show indistinguishable oxygen isotope ratios. Exceptions are minor occurrences of isotopically distinguished relict olivine grains, which were found in nine chondrules. The isotope homogeneity of these phenocrysts is consistent with a co-magmatic crystallization of olivine and pyroxene from the final chondrule melts and a significant oxygen isotope exchange between the ambient gas and the melts. Homogeneous type I chondrules with Mg#'s of 98.9-99.5 have host chondrule Δ17O values ranging from -6.0‰ to -4.1‰, with one exception (Δ17O: -1.2‰; Mg#: 99.6). Homogeneous chondrules with Mg#'s poor H2O ice (∼0.3-0.4× the CI dust; Δ17O > 0‰) and at dust enrichments of ∼300-2000×. Regarding the Mg# and oxygen isotope ratios, the chondrule populations sampled by CM and CO chondrites are similar and indistinguishable. The similarity of these 16O-rich components in CO and CM chondrites is also supported by the common Fe/Mn ratio of olivine in type II chondrules. Although they accreted similar high-temperature silicates, CO chondrites are anhydrous compared to CM chondrites, suggesting they derived from different parent bodies formed inside and outside the snow line, respectively. If chondrules in CO and CM chondrites formed at the same disk locations but the CM parent body accreted later than the CO parent body, the snow line might have crossed the common chondrule-forming region towards the Sun between the time of the CO and CM parent bodies accretion.

Paula, RS, Brasil

Directory of Open Access Journals (Sweden)

Solon Jonas Longhi

2006-01-01

Full Text Available The present work is part of studies and researches developed at Long Duration Ecological Project - PELD/CNPq, located in São Francisco de Paula’s National Forest (FLONA, RS. The objective of this paper was to identify and to characterize the different stages of succession in mixed rainy forest remains. The work had been accomplished in ten permanent conglomerates of 100m x 100m (10.000m2, which were divided into ten strips of 10m x 100m (1.000m2 and these ones subdivided into ten subunits of 10m x 10m (100m2. In this research, a strip of 10m x 100m was selected for each conglomerate, totaling 100 subunits (stands, where it had been installed, at DBH height, dendrometric bands in all trees with CBH ≥ 30cm, for annual diameters measurement. The cluster analysis was accomplished through the Twinspan program, using a data matrix with ninety-nine stands (one of those was unconsidered by the absence of individuals with CBH ≥ 30cm having as variable the annual increment in diameter (obtained in two years of observations of sixty nine species. Three floristic groups was obtained, indicating stages of succession in the forest: a group separated a less developed stage of succession denominated secondary forest, being Nectandra megapotamica and Cryptocaria aschersoniana the indicative species; a second group indicated an intermediate stage of succession in the forest, being Sebastiania commersoniana and Ocotea pulchella the indicative species; and a third group of primary forest, whose indicative species was Araucaria angustifolia.

Diameter dependent electron transfer kinetics in semiconductor-enzyme complexes.

Science.gov (United States)

Brown, Katherine A; Song, Qing; Mulder, David W; King, Paul W

2014-10-28

Excited state electron transfer (ET) is a fundamental step for the catalytic conversion of solar energy into chemical energy. To understand the properties controlling ET between photoexcited nanoparticles and catalysts, the ET kinetics were measured for solution-phase complexes of CdTe quantum dots and Clostridium acetobutylicum [FeFe]-hydrogenase I (CaI) using time-resolved photoluminescence spectroscopy. Over a 2.0-3.5 nm diameter range of CdTe nanoparticles, the observed ET rate (kET) was sensitive to CaI concentration. To account for diameter effects on CaI binding, a Langmuir isotherm and two geometric binding models were created to estimate maximal CaI affinities and coverages at saturating concentrations. Normalizing the ET kinetics to CaI surface coverage for each CdTe diameter led to k(ET) values that were insensitive to diameter, despite a decrease in the free energy for photoexcited ET (ΔGET) with increasing diameter. The turnover frequency (TOF) of CaI in CdTe-CaI complexes was measured at several molar ratios. Normalization for diameter-dependent changes in CaI coverage showed an increase in TOF with diameter. These results suggest that k(ET) and H2 production for CdTe-CaI complexes are not strictly controlled by ΔG(ET) and that other factors must be considered.

Modelling of tomato stem diameter growth rate based on physiological responses

International Nuclear Information System (INIS)

Li, L.; Tan, J.; Lv, T.

2017-01-01

The stem diameter is an important parameter describing the growth of tomato plant during vegetative growth stage. A stem diameter growth model was developed to predict the response of plant growth under different conditions. By analyzing the diurnal variations of stem diameter in tomato (Solanum lycopersicum L.), it was found that the stem diameter measured at 3:00 am was the representative value as the daily basis of tomato stem diameter. Based on the responses of growth rate in stem diameter to light and temperature, a linear regression relationship was applied to establish the stem diameter growth rate prediction model for the vegetative growth stage in tomato and which was further validated by experiment. The root mean square error (RMSE) and relative error (RE) were used to test the correlation between measured and modeled stem diameter variations. Results showed that the model can be used in prediction for stem diameter growth rate at vegetative growth stage in tomato. (author)

Aero-acoustic design and test of a multiple splitter exhaust noise suppressor for a 0.914m diameter lift fan

Science.gov (United States)

Stimpert, D. L.

1973-01-01

A lift fan exhaust suppression system to meet future VTOL aircraft noise goals was designed and tested. The test vehicle was a 1.3 pressure ratio, 36 inch (91.44 cm) diameter lift fan with two chord rotor to stator spacing. A two splitter fan exhaust suppression system thirty inches (76.2 cm) long achieved 10 PNdB exhaust suppression in the aft quadrant compared to a design value of 20 PNdB. It was found that a broadband noise floor limited the realizable suppression. An analytical investigation of broadband noise generated by flow over the treatment surfaces provided very good agreement with the measured suppression levels and noise floor sound power levels. A fan thrust decrement of 22% was measured for the fully suppressed configuration of which 11.1% was attributed to the exhaust suppression hardware.

Calibration of the Diameter Distribution Derived from the Area-based Approach with Individual Tree-based Diameter Estimates Using the Airborne Laser Scanning

Science.gov (United States)

Xu, Q.; Hou, Z.; Maltamo, M.; Tokola, T.

2015-12-01

Diameter distributions of trees are important indicators of current forest stand structure and future dynamics. A new method was proposed in the study to combine the diameter distributions derived from the area-based approach (ABA) and the diameter distribution derived from the individual tree detection (ITD) in order to obtain more accurate forest stand attributes. Since dominant trees can be reliably detected and measured by the Lidar data via the ITD, the focus of the study is to retrieve the suppressed trees (trees that were missed by the ITD) from the ABA. Replacement and histogram matching were respectively employed at the plot level to retrieve the suppressed trees. Cut point was detected from the ITD-derived diameter distribution for each sample plot to distinguish dominant trees from the suppressed trees. The results showed that calibrated diameter distributions were more accurate in terms of error index and the entire growing stock estimates. Compared with the best performer between the ABA and the ITD, calibrated diameter distributions decreased the relative RMSE of the estimated entire growing stock, saw log and pulpwood fractions by 2.81%, 3.05% and 7.73% points respectively. Calibration improved the estimation of pulpwood fraction significantly, resulting in a negligible bias of the estimated entire growing stock.

Multi-diameter pigging: factors affecting the design and selection of pigging tools for multi-diameter pipelines

Energy Technology Data Exchange (ETDEWEB)

Dawson, Karl [Pipeline Engineering and Supply Co. Ltd., Richmond, NY (United States)

2009-07-01

This paper will consider the process involved in pigging tool selection for pipelines with two or more significant internal diameters which require pigging tools capable of negotiating the different internal diameters whilst also carrying out the necessary pipeline cleaning operation. The paper will include an analysis of pipeline features that affect pigging tool selection and then go on to look at other variables that determine the pigging tool design; this will include a step by step guide outlining how the tool is designed, the development of prototype pigs and the importance of testing and validation prior to final deployment in operational pigging programmes. (author)

Peripartum Morbidity after Cesarean Delivery for Arrest of Dilation at 4 to 5 cm Compared with 6 to 10 cm.

Science.gov (United States)

Dahlke, Joshua D; Sperling, Jeffrey D; Has, Phinnara; Lovgren, Todd R; Connealy, Brendan D; Rouse, Dwight J

2018-04-24

 Given that recent consensus guidelines established to decrease cesarean delivery (CD) rates use 6 cm to define the onset of the active phase of labor, our objective was to evaluate maternal and neonatal outcomes after CD for the indication of arrest of dilation at 4 to 5 cm compared with ≥ 6 cm.  We performed a secondary analysis using data from the Maternal Fetal-Medicine Units Network Cesarean Registry. We included nulliparous women with term, singleton, vertex gestations who underwent primary CD for arrest of dilation. We compared those who reached a maximum cervical dilation of 4 to 5 cm with those of ≥6 cm. Our primary outcome was composite maternal morbidity that included chorioamnionitis, endometritis, transfusion, wound complication, operative injury, intensive care unit admission, or death.  Of the 73,257 women in the dataset, 5,681 met the inclusion criteria. After adjusting for confounders, there was no difference in composite maternal (adjusted odds ratio [aOR]: 1.19; 95% confidence interval [CI]: 0.94-1.52) or neonatal morbidity (aOR: 0.94; 95% CI: 0.79-1.10) between the groups.  In this historical cohort, maternal and neonatal outcomes after CD for arrest of dilation ≥ 6 cm were comparable to those performed at 4 to 5 cm and support recent labor management guidelines. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Heritability of retinal vessel diameters and blood pressure

DEFF Research Database (Denmark)

Taarnhøj, Nina C B B; Larsen, Michael; Sander, Birgit

2006-01-01

PURPOSE: To assess the relative influence of genetic and environmental effects on retinal vessel diameters and blood pressure in healthy adults, as well as the possible genetic connection between these two characteristics. METHODS: In 55 monozygotic and 50 dizygotic same-sex healthy twin pairs......%-80%) for CRAE, 83% (95% CI: 73%-89%) for CRVE, and 61% (95% CI: 44%-73%) for mean arterial blood pressure (MABP). Retinal artery diameter decreased with increasing age and increasing arterial blood pressure. Mean vessel diameters in the population were 165.8 +/- 14.9 microm for CRAE, 246.2 +/- 17.7 microm...... for CRVE, and 0.67 +/- 0.05 microm for AVR. No significant influence on artery or vein diameters was found for gender, smoking, body mass index (BMI), total cholesterol, fasting blood glucose, or 2-hour oral glucose tolerance test values. CONCLUSIONS: In healthy young adults with normal blood pressure...

The effect of dielectric tube diameter on the propagation velocity of ionization waves in a He atmospheric-pressure micro-plasma jet

International Nuclear Information System (INIS)

Talviste, Rasmus; Jõgi, Indrek; Raud, Jüri; Paris, Peeter

2016-01-01

The focus of this study was to investigate the effect of the dielectric tube diameter on the velocity of the ionization wave in an atmospheric pressure plasma jet in He gas flow. Plasma was ignited in quartz tubes with inner diameter in the range of 80–500 μm by 6 kHz sinusoidal voltage applied to a cylindrical electrode surrounding the quartz tube and positioned 10 mm from the tube orifice. A grounded plane was placed 2–3 cm downstream from the powered electrode to measure the plasma current. The spatial development of ionization waves was monitored by registering the optical emission along the axis of the tube. The ionization wave velocity was deduced from the temporal shift of the onset of radiation at different axial positions. The velocity of ionization wave increased by almost an order of magnitude with the tube diameter decreasing from 500 to 80 μm and was for the 80 μm microtube 1.7 · 10 5 m s −1 during the positive half-cycle and 1.45 · 10 5 m s −1 during the negative half-cycle. (paper)

The BRIDGE HadCM3 family of climate models: HadCM3@Bristol v1.0

Science.gov (United States)

Valdes, Paul J.; Armstrong, Edward; Badger, Marcus P. S.; Bradshaw, Catherine D.; Bragg, Fran; Crucifix, Michel; Davies-Barnard, Taraka; Day, Jonathan J.; Farnsworth, Alex; Gordon, Chris; Hopcroft, Peter O.; Kennedy, Alan T.; Lord, Natalie S.; Lunt, Dan J.; Marzocchi, Alice; Parry, Louise M.; Pope, Vicky; Roberts, William H. G.; Stone, Emma J.; Tourte, Gregory J. L.; Williams, Jonny H. T.

2017-10-01

Understanding natural and anthropogenic climate change processes involves using computational models that represent the main components of the Earth system: the atmosphere, ocean, sea ice, and land surface. These models have become increasingly computationally expensive as resolution is increased and more complex process representations are included. However, to gain robust insight into how climate may respond to a given forcing, and to meaningfully quantify the associated uncertainty, it is often required to use either or both ensemble approaches and very long integrations. For this reason, more computationally efficient models can be very valuable tools. Here we provide a comprehensive overview of the suite of climate models based around the HadCM3 coupled general circulation model. This model was developed at the UK Met Office and has been heavily used during the last 15 years for a range of future (and past) climate change studies, but has now been largely superseded for many scientific studies by more recently developed models. However, it continues to be extensively used by various institutions, including the BRIDGE (Bristol Research Initiative for the Dynamic Global Environment) research group at the University of Bristol, who have made modest adaptations to the base HadCM3 model over time. These adaptations mean that the original documentation is not entirely representative, and several other relatively undocumented configurations are in use. We therefore describe the key features of a number of configurations of the HadCM3 climate model family, which together make up HadCM3@Bristol version 1.0. In order to differentiate variants that have undergone development at BRIDGE, we have introduced the letter B into the model nomenclature. We include descriptions of the atmosphere-only model (HadAM3B), the coupled model with a low-resolution ocean (HadCM3BL), the high-resolution atmosphere-only model (HadAM3BH), and the regional model (HadRM3B). These also include

SU-F-J-63: Abdominal Diameter Changes in Children During Volumetric Modulated Arc Therapy (VMAT): Is Re-Planning Needed?

Energy Technology Data Exchange (ETDEWEB)

Guerreiro, F; Janssens, G; Seravalli, E; Raaymakers, B [University Medical Center Utrecht, Department of Radiotherapy and Imaging Division, Utrecht (Netherlands)

2016-06-15

Purpose: To investigate the dosimetric impact of daily changes in patient’s diameter, due to weight gain/loss and air in the bowel, based on CBCT information during radiotherapy treatment of pediatric abdominal tumors. Methods: 10 pediatric patients with neuroblastoma (n=6) and Wilms’ (n=4) tumors were included. Available CBCTs were affinely registered to the planning CT for daily set-up variations corrections. A density override approach assigning air-density to the random air pockets and water-density to the remaining anatomy was used to determine the CBCT and CT dose. Clinical VMAT plans, with a PTV prescribed dose ranging between (14.4- 36) Gy, were re-optimized on the density override CT and re-calculated on each CBCT. Dose-volume statistics of the PTV and kidneys, delineated on each CBCT, were used to compare the daily and cumulative CBCT dose with the reference CT dose. Results: The average patient diameter variation was (0.5 ± 0.7) cm (maximum daily difference of 2.3 cm). The average PTV mean dose difference (MDD) between the CT and the cumulative CBCT plans was (0.1 ± 1.1) % (maximum daily MDD of 2%). A reduction in target coverage up to 3% and 7% was observed for the cumulative and daily CBCT plans, respectively. The average kidneys’ cumulative MDD was (−2.7 ± 3.6) % (maximum daily MDD of −12%), corresponding to an overdosage. Conclusion: Due to patient’s diameter changes, a target underdosage was assessed. Given the high local tumor control of neuroblastoma and Wilms’ diseases, the need of re-planning might be discarded. However, the assessed kidneys overdosage could represent a problem when the normal tissue tolerance is reached. The necessity of re-planning should then be considered to reduce the risk of long-term renal complications. Due to the poor softtissue contrast on CBCT, MRI-guidance is required to obtain a better assessment of the accumulated dose on the remaining OARs.

77 FR 8877 - ICD-9-CM Coordination and Maintenance (C&M) Committee Meeting

Science.gov (United States)

2012-02-15

...), Classifications and Public Health Data Standards Staff, announces the following meeting. Name: ICD-9-CM... proposed modifications to the International Classification of Diseases, Ninth-Revision, Clinical... Infusion of Glucarpidase ICD-10 Updates: ICD-10 MS-DRG Update ICD-10 HAC Translation List Impact of ICD-10...

Lumbar Vertebral Canal Diameters in Adult Ugandan Skeletons ...

African Journals Online (AJOL)

Background: Normal values of lumbar vertebral canal diameters are useful in facilitating diagnosis of lumbar vertebral canal stenosis. Various studies have established variation on values between different populations, gender, age, and ethnic groups. Objectives: To determine the lumbar vertebral canal diameters in adult ...

Diameter dependent failure current density of gold nanowires

International Nuclear Information System (INIS)

Karim, S; Maaz, K; Ali, G; Ensinger, W

2009-01-01

Failure current density of single gold nanowires is investigated in this paper. Single wires with diameters ranging from 80 to 720 nm and length 30 μm were electrochemically deposited in ion track-etched single-pore polycarbonate membranes. The maximum current density was investigated while keeping the wires embedded in the polymer matrix and ramping up the current until failure occurred. The current density is found to increase with diminishing diameter and the wires with a diameter of 80 nm withstand 1.2 x 10 12 A m -2 before undergoing failure. Possible reasons for these results are discussed in this paper.

Reduced arterial diameter during static exercise in humans

DEFF Research Database (Denmark)

Olesen, H L; Mitchell, J H; Friedman, D B

1995-01-01

In eight subjects luminal diameter of the resting limb radial and dorsalis pedis arteries was determined by high-resolution ultrasound (20 MHz). This measurement was followed during rest and during 2 min of static handgrip or of one-leg knee extension at 30% of maximal voluntary contraction...... exertion was approximately 15 units after both types of exercise. The dorsalis pedis arterial diameter was 1.50 +/- 0.20 mm (mean and SE) and the radial AD 2.45 +/- 0.12 mm. During both types of contractions the luminal diameters decreased approximately 3.5% within the first 30 s (P

Effective diameters and corresponding states of fluids

Science.gov (United States)

Del Río, Fernando

Effective hard-sphere diameters of fluids with purely repulsive interactions are derived from a generalized corresponding-states principle of Leland, Rowlinson and coworkers. Various alternative definitions are discussed and related. Virial expansions of the effective diameters and their corresponding volumes are obtained and compared with results of perturbation theory. Applications are made to inverse-power potentials, the repulsive part of the Lennard-Jones potential and hard spherocylinders and dumbells.

Comparison between transcerebellar diameter with biparietal diameter of ultrasound for gestational age measurement in third trimester of pregnancy

International Nuclear Information System (INIS)

Naseem, F.; Fatima, N.; Yasmeen, S.; Saleem, S.

2013-01-01

To determine the frequency of correct assessment by transcerebeller diameter (TCD) versus biparietal diameter (BPD) for gestational age measurement at 36 weeks of pregnancy using first day of last menstrual period (LMP) for actual period of gestation. Study Design: Quasi experimental. Place and Duration of Study: Department of Obstetrics and Gynaecology, Bahawal Victoria Hospital, Bahawalpur from May to November 2010. Methodology: This study was performed on 228 patients at 36 weeks of pregnancy fulfilling the inclusion criteria. Ultrasound measurements of TCD and BPD was made and compared with LMP. Collected data was analyzed by SPSS version 10. Proportoin of correct diagnosis by each measurement was determined and compared using chi-square test with significance at p < 0.05. Results: Out of 228 patients, TCD was found to give correct assessment in 209 patients (91.7%; p = 0.001) corresponding to the gestational age by LMP i.e 36 weeks. BPD was found to give correct assessment corresponding to the gestational age by LMP in 176 patients (77.2%). Conclusion: Although both BPD and TCD are accurate biometric parameters at 36 weeks of gestation, transcerebellar diameter is more reliable method of gestational age determination in third trimester of pregnancy than biparietal diameter. TCD can be used as a tool to assist in the assessment of gestational age in third trimester. (author)

Heritability of optic disc diameters: a twin study

DEFF Research Database (Denmark)

Drobnjak, Dragana; Taarnhøj, Nina Charlotte; Mitchell, Paul

2011-01-01

, additive genetic factors (i.e. heritability) explained 77% (95% CI: 65-85%) of variation of vertical disc diameters, whereas estimated unshared environmental effect was 23% (95% CI: 15-35%). For vertical cup diameters, heritability accounted for 70% (95% CI: 55-80%) and environmental factors 30% (95% CI...

Plasma sputtering robotic device for in-situ thick coatings of long, small diameter vacuum tubesa)

Science.gov (United States)

Hershcovitch, A.; Blaskiewicz, M.; Brennan, J. M.; Custer, A.; Dingus, A.; Erickson, M.; Fischer, W.; Jamshidi, N.; Laping, R.; Liaw, C.-J.; Meng, W.; Poole, H. J.; Todd, R.

2015-05-01

A novel robotic plasma magnetron mole with a 50 cm long cathode was designed, fabricated, and operated. The reason for this endeavor is to alleviate the problems of unacceptable resistive heating of stainless steel vacuum tubes in the BNL Relativistic Heavy Ion Collider (RHIC). The magnetron mole was successfully operated to copper coat an assembly containing a full-size, stainless steel, cold bore, RHIC magnet tubing connected to two types of RHIC bellows, to which two additional pipes made of RHIC tubing were connected. To increase the cathode lifetime, a movable magnet package was developed, and the thickest possible cathode was made, with a rather challenging target to substrate (de facto anode) distance of less than 1.5 cm. Achieving reliable steady state magnetron discharges at such a short cathode to anode gap was rather challenging, when compared to commercial coating equipment, where the target to substrate distance is 10's cm; 6.3 cm is the lowest experimental target to substrate distance found in the literature. Additionally, the magnetron developed during this project provides unique omni-directional uniform coating. The magnetron is mounted on a carriage with spring loaded wheels that successfully crossed bellows and adjusted for variations in vacuum tube diameter, while keeping the magnetron centered. Electrical power and cooling water were fed through a cable bundle. The umbilical cabling system is driven by a motorized spool. Excellent coating adhesion was achieved. Measurements indicated that well-scrubbed copper coating reduced secondary electron yield to 1, i.e., the problem of electron clouds can be eliminated. Room temperature RF resistivity measurement indicated that a 10 μm copper coated stainless steel RHIC tube has a conductivity close to that of pure copper tubing. Excellent coating adhesion was achieved. The device details and experimental results are described.

Plasma sputtering robotic device for in-situ thick coatings of long, small diameter vacuum tubes

Energy Technology Data Exchange (ETDEWEB)

Hershcovitch, A., E-mail: hershcovitch@bnl.gov; Blaskiewicz, M.; Brennan, J. M.; Fischer, W.; Liaw, C.-J.; Meng, W.; Todd, R. [Brookhaven National Laboratory, Upton, New York 11973 (United States); Custer, A.; Dingus, A.; Erickson, M.; Jamshidi, N.; Laping, R.; Poole, H. J. [PVI, Oxnard, California 93031 (United States)

2015-05-15

A novel robotic plasma magnetron mole with a 50 cm long cathode was designed, fabricated, and operated. The reason for this endeavor is to alleviate the problems of unacceptable resistive heating of stainless steel vacuum tubes in the BNL Relativistic Heavy Ion Collider (RHIC). The magnetron mole was successfully operated to copper coat an assembly containing a full-size, stainless steel, cold bore, RHIC magnet tubing connected to two types of RHIC bellows, to which two additional pipes made of RHIC tubing were connected. To increase the cathode lifetime, a movable magnet package was developed, and the thickest possible cathode was made, with a rather challenging target to substrate (de facto anode) distance of less than 1.5 cm. Achieving reliable steady state magnetron discharges at such a short cathode to anode gap was rather challenging, when compared to commercial coating equipment, where the target to substrate distance is 10's cm; 6.3 cm is the lowest experimental target to substrate distance found in the literature. Additionally, the magnetron developed during this project provides unique omni-directional uniform coating. The magnetron is mounted on a carriage with spring loaded wheels that successfully crossed bellows and adjusted for variations in vacuum tube diameter, while keeping the magnetron centered. Electrical power and cooling water were fed through a cable bundle. The umbilical cabling system is driven by a motorized spool. Excellent coating adhesion was achieved. Measurements indicated that well-scrubbed copper coating reduced secondary electron yield to 1, i.e., the problem of electron clouds can be eliminated. Room temperature RF resistivity measurement indicated that a 10 μm copper coated stainless steel RHIC tube has a conductivity close to that of pure copper tubing. Excellent coating adhesion was achieved. The device details and experimental results are described.

Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment

International Nuclear Information System (INIS)

Divya, V.D.; Muñoz-Moreno, R.; Messé, O.M.D.M.; Barnard, J.S.; Baker, S.; Illston, T.; Stone, H.J.

2016-01-01

The selective laser melting of high temperature alloys is of great interest to the aerospace industry as it offers the prospect of producing more complex geometries than can be achieved with other manufacturing methods. In this study, the microstructure of the nickel-based superalloy, CM247LC, has been characterised following selective laser melting and after a post deposition heat treatment below the γ′ solvus temperature. In the as-deposited state, scanning electron microscopy with electron backscatter diffraction revealed a fine, cellular microstructure with preferential alignment of 〈001〉 along the build direction. A high dislocation density was seen at the periphery of the cells, indicating substantial localised deformation of the material. Fine primary MC carbides were also observed in the inter-cellular regions. High-resolution transmission electron microscopy identified the occurrence of very fine γ′ precipitates, approximately 5 nm in diameter, dispersed within the gamma phase. After heat treatment, the elongated cell colonies were observed to partially coalesce, accompanied by a decrease in dislocation density, producing columnar grains along the build direction. Cuboidal γ′ precipitates approximately 500 nm in diameter were observed to form in the recrystallised grains, accompanied by larger γ′ precipitates on the grain boundaries.

Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment

Energy Technology Data Exchange (ETDEWEB)

Divya, V.D., E-mail: dv272@cam.ac.uk [Department of Materials Science and Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge CB3 0FS (United Kingdom); Muñoz-Moreno, R.; Messé, O.M.D.M.; Barnard, J.S. [Department of Materials Science and Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge CB3 0FS (United Kingdom); Baker, S.; Illston, T. [Materials Solutions, Unit 8, Great Western Business Park, McKenzie Way, Worcester WR4 9GN (United Kingdom); Stone, H.J. [Department of Materials Science and Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge CB3 0FS (United Kingdom)

2016-04-15

The selective laser melting of high temperature alloys is of great interest to the aerospace industry as it offers the prospect of producing more complex geometries than can be achieved with other manufacturing methods. In this study, the microstructure of the nickel-based superalloy, CM247LC, has been characterised following selective laser melting and after a post deposition heat treatment below the γ′ solvus temperature. In the as-deposited state, scanning electron microscopy with electron backscatter diffraction revealed a fine, cellular microstructure with preferential alignment of 〈001〉 along the build direction. A high dislocation density was seen at the periphery of the cells, indicating substantial localised deformation of the material. Fine primary MC carbides were also observed in the inter-cellular regions. High-resolution transmission electron microscopy identified the occurrence of very fine γ′ precipitates, approximately 5 nm in diameter, dispersed within the gamma phase. After heat treatment, the elongated cell colonies were observed to partially coalesce, accompanied by a decrease in dislocation density, producing columnar grains along the build direction. Cuboidal γ′ precipitates approximately 500 nm in diameter were observed to form in the recrystallised grains, accompanied by larger γ′ precipitates on the grain boundaries.

Brain Arterial Diameters as a Risk Factor for Vascular Events.

Science.gov (United States)

Gutierrez, Jose; Cheung, Ken; Bagci, Ahmet; Rundek, Tatjana; Alperin, Noam; Sacco, Ralph L; Wright, Clinton B; Elkind, Mitchell S V

2015-08-06

Arterial luminal diameters are routinely used to assess for vascular disease. Although small diameters are typically considered pathological, arterial dilatation has also been associated with disease. We hypothesize that extreme arterial diameters are biomarkers of the risk of vascular events. Participants in the Northern Manhattan Study who had a time-of-flight magnetic resonance angiography were included in this analysis (N=1034). A global arterial Z-score, called the brain arterial remodeling (BAR) score, was obtained by averaging the measured diameters within each individual. Individuals with a BAR score -2 and 2 SDs had the largest diameters. All vascular events were recorded prospectively after the brain magnetic resonance imaging. Spline curves and incidence rates were used to test our hypothesis. The association of the BAR score with death (P=0.001), vascular death (P=0.02), any vascular event (P=0.05), and myocardial infarction (P=0.10) was U-shaped except for ischemic stroke (P=0.74). Consequently, incidence rates for death, vascular death, myocardial infarction, and any vascular event were higher in individuals with the largest diameters, whereas individuals with the smallest diameters had a higher incidence of death, vascular death, any vascular event, and ischemic stroke compared with individuals with average diameters. The risk of death, vascular death, and any vascular event increased at both extremes of brain arterial diameters. The pathophysiology linking brain arterial remodeling to systemic vascular events needs further research. © 2015 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.

Forest Inventory with Terrestrial LiDAR: A Comparison of Static and Hand-Held Mobile Laser Scanning

Directory of Open Access Journals (Sweden)

Sébastien Bauwens

2016-06-01

Full Text Available The application of static terrestrial laser scanning (TLS in forest inventories is becoming more effective. Nevertheless, the occlusion effect is still limiting the processing efficiency to extract forest attributes. The use of a mobile laser scanner (MLS would reduce this occlusion. In this study, we assessed and compared a hand-held mobile laser scanner (HMLS with two TLS approaches (single scan: SS, and multi scan: MS for the estimation of several forest parameters in a wide range of forest types and structures. We found that SS is competitive to extract the ground surface of forest plots, while MS gives the best result to describe the upper part of the canopy. The whole cross-section at 1.3 m height is scanned for 91% of the trees (DBH > 10 cm with the HMLS leading to the best results for DBH estimates (bias of −0.08 cm and RMSE of 1.11 cm, compared to no fully-scanned trees for SS and 42% fully-scanned trees for MS. Irregularities, such as bark roughness and non-circular cross-section may explain the negative bias encountered for all of the scanning approaches. The success of using MLS in forests will allow for 3D structure acquisition on a larger scale and in a time-efficient manner.

Diameter of the thoracic and abdominal aorta in healthy Japanese

International Nuclear Information System (INIS)

Matsunaga, Wakako

1989-01-01

In 300 cases, diameter of thoracic and abdominal aorta in healthy Japanese is measured by computed tomography (CT) and the values are analyzed in relation to the age, sex and the level of the aorta on CT scan. Aorta becomes dilated with age. In female diameter of the aorta is correlated with age, on the other hand, diameter of those is not correlated with age in male. Diameter in male is larger than in female. Aorta tapers off and the ratio of tapering of the thoracic aorta is more prominent than that of the abdominal aorta. Therefore the calculations of the landmarks of tapering of the aorta and the ratio of diameter of the aorta to transverse diameter of the vertebral body at the levels of 10th thoracic and 3rd lumber vertebrae on CT scan are useful for judgement of normal range of diameter of the aorta. Calcifications of the wall of the aorta are seen initially at the age of 5th decade in the abdominal aorta and 6th decade in the thoracic aorta in healthy Japanese. They are noted in almost of the persons after the age of seventy years old. The presence of calcification is not correlated with diameter of the aorta at the same level on CT scan. (author)

Small Diameter Bomb Increment II (SDB II)

Science.gov (United States)

2015-12-01

Selected Acquisition Report (SAR) RCS: DD-A&T(Q&A)823-439 Small Diameter Bomb Increment II (SDB II) As of FY 2017 President’s Budget Defense... Bomb Increment II (SDB II) DoD Component Air Force Joint Participants Department of the Navy Responsible Office References SAR Baseline (Production...Mission and Description Small Diameter Bomb Increment II (SDB II) is a joint interest United States Air Force (USAF) and Department of the Navy

Gas phase synthesis of non-bundled, small diameter single-walled carbon nanotubes with near-armchair chiralities

Energy Technology Data Exchange (ETDEWEB)

Mustonen, K.; Laiho, P.; Kaskela, A.; Zhu, Z.; Reynaud, O.; Houbenov, N.; Tian, Y.; Jiang, H.; Kauppinen, E. I., E-mail: esko.kauppinen@aalto.fi [Department of Applied Physics, Aalto University School of Science, P.O. Box 15100, FI-00076 Aalto (Finland); Susi, T. [Faculty of Physics, University of Vienna, Boltzmanngasse 5, A-1090 Vienna (Austria); Nasibulin, A. G. [Department of Applied Physics, Aalto University School of Science, P.O. Box 15100, FI-00076 Aalto (Finland); Skolkovo Institute of Science and Technology, Nobel str. 3, 143026 (Russian Federation); Saint-Petersburg State Polytechnical University, 29 Polytechniheskaya st., St. Petersburg, 195251 (Russian Federation)

2015-07-06

We present a floating catalyst synthesis route for individual, i.e., non-bundled, small diameter single-walled carbon nanotubes (SWCNTs) with a narrow chiral angle distribution peaking at high chiralities near the armchair species. An ex situ spark discharge generator was used to form iron particles with geometric number mean diameters of 3–4 nm and fed into a laminar flow chemical vapour deposition reactor for the continuous synthesis of long and high-quality SWCNTs from ambient pressure carbon monoxide. The intensity ratio of G/D peaks in Raman spectra up to 48 and mean tube lengths up to 4 μm were observed. The chiral distributions, as directly determined by electron diffraction in the transmission electron microscope, clustered around the (n,m) indices (7,6), (8,6), (8,7), and (9,6), with up to 70% of tubes having chiral angles over 20°. The mean diameter of SWCNTs was reduced from 1.10 to 1.04 nm by decreasing the growth temperature from 880 to 750 °C, which simultaneously increased the fraction of semiconducting tubes from 67% to 80%. Limiting the nanotube gas phase number concentration to ∼10{sup 5 }cm{sup −3} prevented nanotube bundle formation that is due to collisions induced by Brownian diffusion. Up to 80% of 500 as-deposited tubes observed by atomic force and transmission electron microscopy were individual. Transparent conducting films deposited from these SWCNTs exhibited record low sheet resistances of 63 Ω/□ at 90% transparency for 550 nm light.

SU-F-18C-11: Diameter Dependency of the Radial Dose Distribution in a Long Polyethylene Cylinder

Energy Technology Data Exchange (ETDEWEB)

Bakalyar, D; McKenney, S [Henry Ford Health System, Detroit, MI (United States); Feng, W [New York Presbyterian Hospital, Tenafly, NJ (United States)

2014-06-15

Purpose: The radial dose distribution in the central plane of a long cylinder following a long CT scan depends upon the diameter and composition of the cylinder. An understanding of this behavior is required for determining the spatial average of the dose in the central plane. Polyethylene, the material for construction of the TG200/ICRU phantom (30 cm in diameter) was used for this study. Size effects are germane to the principles incorporated in size specific dose estimates (SSDE); thus diameter dependency was explored as well. Method: ssuming a uniform cylinder and cylindrically symmetric conditions of irradiation, the dose distribution can be described using a radial function. This function must be an even function of the radial distance due to the conditions of symmetry. Two effects are accounted for: The direct beam makes its weakest contribution at the center while the contribution due to scatter is strongest at the center and drops off abruptly at the outer radius. An analytic function incorporating these features was fit to Monte Carlo results determined for infinite polyethylene cylinders of various diameters. A further feature of this function is that it is integrable. Results: Symmetry and continuity dictate a local extremum at the center which is a minimum for the larger sizes. The competing effects described above can Resultin an absolute maximum occurring between the center and outer edge of the cylinders. For the smallest cylinders, the maximum dose may occur at the center. Conclusion: An integrable, analytic function can be used to characterize the radial dependency of dose for cylindrical CT phantoms of various sizes. One use for this is to help determine average dose distribution over the central cylinder plane when equilibrium dose has been reached.

Factors associated with changes in vaginal length and diameter during pelvic radiotherapy for cervical cancer.

Science.gov (United States)

Martins, Jumara; Vaz, Ana Francisca; Grion, Regina Celia; Esteves, Sérgio Carlos Barros; Costa-Paiva, Lúcia; Baccaro, Luiz Francisco

2017-12-01

This study reports the incidence and factors associated with vaginal stenosis and changes in vaginal dimensions after pelvic radiotherapy for cervical cancer. A descriptive longitudinal study with 139 women with cervical cancer was conducted from January 2013 to November 2015. The outcome variables were vaginal stenosis assessed using the Common Terminology Criteria for Adverse Events (CTCAE v3.0) and changes in vaginal diameter and length after the end of radiotherapy. Independent variables were the characteristics of the neoplasm, clinical and sociodemographic data. Bivariate analysis was carried out using χ 2 , Kruskal-Wallis and Mann-Whitney's test. Multiple analysis was carried out using Poisson regression and a generalized linear model. Most women (50.4%) had stage IIIB tumors. According to CTCAE v3.0 scale, 30.2% had no stenosis, 69.1% had grade 1 and 0.7% had grade 2 stenosis after radiotherapy. Regarding changes in vaginal measures, the mean variation in diameter was - 0.6 (± 1.7) mm and the mean variation in length was - 0.6 (± 1.3) cm. In the final statistical model, having tumoral invasion of the vaginal walls (coefficient + 0.73, p vaginal stenosis and lower reduction of vaginal dimensions. Advanced clinical stage (coefficient + 1.44; p = 0.02) and receiving brachytherapy/teletherapy (coefficient - 1.17, p vaginal dimensions. Most women had mild vaginal stenosis with slight reductions in both diameter and length of the vaginal canal. Women with tumoral invasion of the vagina have an increase in vaginal length soon after radiotherapy due to a reduction in tumoral volume.

Diameter measurements of polystyrene particles with atomic force microscopy

International Nuclear Information System (INIS)

Garnaes, J

2011-01-01

The size of (nano) particles is a key parameter used in controlling their function. The particle size is also important in order to understand their physical and chemical properties and regulate their number in health and safety issues. In this work, the geometric diameters of polystyrene spheres of nominal diameter 100 nm are measured using atomic force microscopy. The measurements are based on the apex height and on the average distance between neighbouring spheres when they form a close-packed monolayer on a flat mica substrate. The most important influence parameters for the determination of the geometric diameter are the lateral air gaps and deformation of the spheres. The lateral air gaps are caused by significant size variations of the individual spheres, and a correction is calculated based on the simulation of packing of spheres. The deformation of the spheres is caused mainly by capillary forces acting when they are in contact with each other or with the mica substrate. Based on calculated capillary forces and the literature values of the elastic properties of the polystyrene and mica, the deformation is estimated to be 2 nm with a standard uncertainty of 2 nm. The geometric diameter of the polystyrene spheres was measured with a combined standard uncertainty of ≈3 nm. The measured vertical diameter of 92.3 nm and the certified mobility equivalent diameter measured by differential mobility analysis (DMA) are marginally consistent at a confidence level of 95%. However, the measured lateral geometric diameter was 98.9 nm and is in good agreement with DMA

CM: Becoming a technology firm (teaching case)

NARCIS (Netherlands)

van Burg, J.C.; Reymen, I.M.M.J.; Dolmans, S.A.M.

2011-01-01

Founded in 2000 as a Short Message Service (SMS) marketing company for discos (clubs), CM evolved into a technology provider for SMS services. By 2008, CM was market leader in The Netherlands, a position won by offering high quality services at low prices. In 2010, the founders of the company were

The statistical model calculation of prompt neutron spectra from spontaneous fission of {sup 244}Cm and {sup 246}Cm

Energy Technology Data Exchange (ETDEWEB)

Gerasimenko, B.F. [V.G. Khlopin Radium Inst., Saint Peterburg (Russian Federation)

1997-03-01

The calculations of integral spectra of prompt neutrons of spontaneous fission of {sup 244}Cm and {sup 246}Cm were carried out. The calculations were done by the Statistical Computer Code Complex SCOFIN applying the Hauser-Feschbach method as applied to the description of the de-excitation of excited fission fragments by means of neutron emission. The emission of dipole gamma-quanta from these fragments was considered as a competing process. The average excitation energy of a fragment was calculated by two-spheroidal model of tangent fragments. The density of levels in an excited fragment was calculated by the Fermi-gas model. The quite satisfactory agreement was reached between theoretical and experimental results obtained in frames of Project measurements. The calculated values of average multiplicities of neutron number were 2,746 for {sup 244}Cm and 2,927 for {sup 246}Cm that was in a good accordance with published experimental figures. (author)

Component biomass equations for black spruce in Maine

Science.gov (United States)

M. M. Czapowskyj; D. J. Robison; R. D. Briggs; E. H. White; E. H. White

1985-01-01

Component biomass prediction equations are presented for young black spruce (Picea mariana B.S.P. (Mill,:)) in northern Maine. A weighted least squares model was used to construct the eq~iationsfo r small trees from 1 to 15 cm d.b.h., and an ordinary least squares model for trees less than 2 m in height. A linearized allometric model was also tested but was not used....

Modelling diameter growth, mortality and recruitment of trees in ...

African Journals Online (AJOL)

Modelling diameter growth, mortality and recruitment of trees in miombo woodlands of Tanzania. ... Individual tree diameter growth and mortality models, and area-based recruitment models were developed. ... AJOL African Journals Online.

CALIBRAÇÃO DO MODELO 3-PG PARA Eucalyptus saligna Smith NA REGIÃO DE GUAÍBA - RS

Directory of Open Access Journals (Sweden)

Eduardo Kneipp Londero

2015-01-01

Full Text Available ABSTRACTThe study aimed to calibrate the model 3-PG forEucalyptus salignafor the following the diameter variablesat breast height (DBH, total height, wood volume and branch, bark and wood biomass. The study tookplace in the region of Guaíba, Rio Grande do Sul state, Brazil. Clonal plantations ofEucalyptus salignainvarious spacings were used. Six different ages were selected along the crop cycle (2nd to 7th year. Afterthe forest inventory was carried out, the biomass of three trees fractionated into wood, bark, branches andleaves was collected. The biomass of roots on the average tree of each plot was measured to a depth of 1m. Physical and chemical analyses were performed in soil samples from the layers: 0 to 20 cm, 20 to 40 cmand 40 to 100 cm. Litter deposition was estimated by allocating 4 square collectors of 0.5 m². The leaf areawas obtained through digital photographs and thus the specific leaf area was estimated. The physiologicalparameters were measured in six plots, one at each age. Climatic parameters were provided by EEA ofUFRGS University, located in Eldorado do Sul, RS state. The model validation was not statistically accepted, but their estimated data can be used to estimate the studied variables, demonstrating the potential ofits use although additional studies for the application of the model to this species are still needed.

Developing Cost-Effective Field Assessments of Carbon Stocks in Human-Modified Tropical Forests.

Science.gov (United States)

Berenguer, Erika; Gardner, Toby A; Ferreira, Joice; Aragão, Luiz E O C; Camargo, Plínio B; Cerri, Carlos E; Durigan, Mariana; Oliveira Junior, Raimundo C; Vieira, Ima C G; Barlow, Jos

2015-01-01

Across the tropics, there is a growing financial investment in activities that aim to reduce emissions from deforestation and forest degradation, such as REDD+. However, most tropical countries lack on-the-ground capacity to conduct reliable and replicable assessments of forest carbon stocks, undermining their ability to secure long-term carbon finance for forest conservation programs. Clear guidance on how to reduce the monetary and time costs of field assessments of forest carbon can help tropical countries to overcome this capacity gap. Here we provide such guidance for cost-effective one-off field assessments of forest carbon stocks. We sampled a total of eight components from four different carbon pools (i.e. aboveground, dead wood, litter and soil) in 224 study plots distributed across two regions of eastern Amazon. For each component we estimated survey costs, contribution to total forest carbon stocks and sensitivity to disturbance. Sampling costs varied thirty-one-fold between the most expensive component, soil, and the least, leaf litter. Large live stems (≥10 cm DBH), which represented only 15% of the overall sampling costs, was by far the most important component to be assessed, as it stores the largest amount of carbon and is highly sensitive to disturbance. If large stems are not taxonomically identified, costs can be reduced by a further 51%, while incurring an error in aboveground carbon estimates of only 5% in primary forests, but 31% in secondary forests. For rapid assessments, necessary to help prioritize locations for carbon- conservation activities, sampling of stems ≥20cm DBH without taxonomic identification can predict with confidence (R2 = 0.85) whether an area is relatively carbon-rich or carbon-poor-an approach that is 74% cheaper than sampling and identifying all the stems ≥10cm DBH. We use these results to evaluate the reliability of forest carbon stock estimates provided by the IPCC and FAO when applied to human-modified forests

Determinants of Tree Assemblage Composition at the Mesoscale within a Subtropical Eucalypt Forest

Science.gov (United States)

Hero, Jean-Marc; Butler, Sarah A.; Lollback, Gregory W.; Castley, James G.

2014-01-01

A variety of environmental processes, including topography, edaphic and disturbance factors can influence vegetation composition. The relative influence of these patterns has been known to vary with scale, however, few studies have focused on environmental drivers of composition at the mesoscale. This study examined the relative importance of topography, catchment flow and soil in influencing tree assemblages in Karawatha Forest Park; a South-East Queensland subtropical eucalypt forest embedded in an urban matrix that is part of the Terrestrial Ecosystem Research Network South-East Queensland Peri-urban SuperSite. Thirty-three LTER plots were surveyed at the mesoscale (909 ha), where all woody stems ≥1.3 m high rooted within plots were sampled. Vegetation was divided into three cohorts: small (≥1–10 cm DBH), intermediate (≥10–30 cm DBH), and large (≥30 cm DBH). Plot slope, aspect, elevation, catchment area and location and soil chemistry and structure were also measured. Ordinations and smooth surface modelling were used to determine drivers of vegetation assemblage in each cohort. Vegetation composition was highly variable among plots at the mesoscale (plots systematically placed at 500 m intervals). Elevation was strongly related to woody vegetation composition across all cohorts (R2: 0.69–0.75). Other topographic variables that explained a substantial amount of variation in composition were catchment area (R2: 0.43–0.45) and slope (R2: 0.23–0.61). Soil chemistry (R2: 0.09–0.75) was also associated with woody vegetation composition. While species composition differed substantially between cohorts, the environmental variables explaining composition did not. These results demonstrate the overriding importance of elevation and other topographic features in discriminating tree assemblage patterns irrespective of tree size. The importance of soil characteristics to tree assemblages was also influenced by topography, where ridge top sites were

Análise florística e estrutural de uma floresta em diferentes estágios sucessionais no município de Castanhal, Pará Floristic composition and structure of a forest in different successional stages in Castanhal, Pará

Directory of Open Access Journals (Sweden)

Roberta de Fátima Rodrigues Coelho

2003-12-01

Full Text Available O objetivo deste trabalho foi estudar a sucessão florestal pela análise florística e estrutural de floresta em três estágios sucessionais (4, 8 e 12 anos, localizadas no município de Castanhal-PA. Consideraram-se duas classes de DAP: Classe I (DAP>1cm e classe II (DAPThe objective of this study is to understand secondary forest succession through florisitc and structural analysis of a forest in three successional stages (4, 8 and 12 years located in Castanhal in the state of Pará. This study considers wood species divided into two DBH classes: class I (DBH>1cm and class II (DBH<1cm. Class I individuals were measured in twelve 10m x 10m plots in the 12-year-old successional forest, and in four 10 x 10 m plots in the 4 and 8-year-old secondary forest stands. Class II individuals were measured in 48 subplots of 1m x 1m in the 12-year-old forest stand, and in 16 subplots in the 4 and 8-year-old forest stands. In Class I, 18, 30 and 73 species were identified; and were found 12, 18 and 21 individuals/ha in the 4, 8 and 12-year-old forests, respectively. In class II, 17, 21 and 62 species were identified; and were found 50, 26 and 47 individuals/m² in the 4, 8 and 12-year-old forests, respectively. For class I, Lacistema pubescens, Vismia guianensis and Myrcia sylvatica demonstrated the greatest abundance and relative dominance. In class II, Lacistema pubescens, Vismia guianensis, Miconia ciliata, Myrcia bracteata and Banara guianensis also displayed an elevated number of individuals. Myrcia sylvatica presented the greatest abundance in the three successional stages. Similarity among plots was approximately 60% for class I and 42% for class II. The results showed the forest with three stages of successional development: initiation phase (4 years, exclusion phase (8 years, and the beginning of the understory reinitiation phase (12 years.

Developing Cost-Effective Field Assessments of Carbon Stocks in Human-Modified Tropical Forests.

Directory of Open Access Journals (Sweden)

Erika Berenguer

Full Text Available Across the tropics, there is a growing financial investment in activities that aim to reduce emissions from deforestation and forest degradation, such as REDD+. However, most tropical countries lack on-the-ground capacity to conduct reliable and replicable assessments of forest carbon stocks, undermining their ability to secure long-term carbon finance for forest conservation programs. Clear guidance on how to reduce the monetary and time costs of field assessments of forest carbon can help tropical countries to overcome this capacity gap. Here we provide such guidance for cost-effective one-off field assessments of forest carbon stocks. We sampled a total of eight components from four different carbon pools (i.e. aboveground, dead wood, litter and soil in 224 study plots distributed across two regions of eastern Amazon. For each component we estimated survey costs, contribution to total forest carbon stocks and sensitivity to disturbance. Sampling costs varied thirty-one-fold between the most expensive component, soil, and the least, leaf litter. Large live stems (≥10 cm DBH, which represented only 15% of the overall sampling costs, was by far the most important component to be assessed, as it stores the largest amount of carbon and is highly sensitive to disturbance. If large stems are not taxonomically identified, costs can be reduced by a further 51%, while incurring an error in aboveground carbon estimates of only 5% in primary forests, but 31% in secondary forests. For rapid assessments, necessary to help prioritize locations for carbon- conservation activities, sampling of stems ≥20cm DBH without taxonomic identification can predict with confidence (R2 = 0.85 whether an area is relatively carbon-rich or carbon-poor-an approach that is 74% cheaper than sampling and identifying all the stems ≥10cm DBH. We use these results to evaluate the reliability of forest carbon stock estimates provided by the IPCC and FAO when applied to human

An Experience of Statistical Method Application in Forest Survey at Angara River Region in 1932

Directory of Open Access Journals (Sweden)

L. N. Vashchuk

2014-10-01

Full Text Available Report of the Angara forest economic expedition of forest economic survey in 1932 on the left bank of the Angara River has been found. The survey covered a part of Krasnoyarsk Territory and Irkutsk region, a total area of 18641.8 thousand ha. The report describes technology of forest inventory and achievements that have not previously been published. The survey was conducted by statistical method, which consisted of a sample by a continuous forest inventory enumeration of trees on sample plots (SP, arranged in an array on a particular system, followed by mathematical-statistical recalculation of the sample results to the entire survey. To do this, strip finders (sights were cut in the latitudinal direction at a distance from one another at 16 km. On the hacked sights, by every 2 km, 0.1 ha (10 × 100 m SP were established. In total 32 forest inventory sights were hacked, with total length of 9931 km, which incorporated 4817 SP. The accuracy of forest resources’ inventory characteristics determining also was investigated using smaller sample plots. For this purpose, each of the SP were cut to smaller area of 0.01 ha (10 × 10 m, where independent continuous enumeration of trees was conducted, andsample trees were cut, measured and bucked to the assortments, to explore the tree stand assortment structure. At each «sample cutting area» all the trees were felled out from 44 cm and above DBH. At half of the sample plot with 5 × 10 m size, located in the eastern end, all the trees were felled out and measured from 24 cm and above DBH. Every four «sample cutting area» in the fifth, all the trees with 12 cm and above DBH were cut down and measured. According to the results of the work, a detailed description of forest resources in the whole Angara river basin, and across 17 forest exploitation areas was completed.

Synthesis of an ultradense forest of vertically aligned triple-walled carbon nanotubes of uniform diameter and length using hollow catalytic nanoparticles.

Science.gov (United States)

Baliyan, Ankur; Nakajima, Yoshikata; Fukuda, Takahiro; Uchida, Takashi; Hanajiri, Tatsuro; Maekawa, Toru

2014-01-22

It still remains a crucial challenge to actively control carbon nanotube (CNT) structure such as the alignment, area density, diameter, length, chirality, and number of walls. Here, we synthesize an ultradense forest of CNTs of a uniform internal diameter by the plasma-enhanced chemical vapor deposition (PECVD) method using hollow nanoparticles (HNPs) modified with ligand as a catalyst. The diameters of the HNPs and internal cavities in the HNPs are uniform. A monolayer of densely packed HNPs is self-assembled on a silicon substrate by spin coating. HNPs shrink via the collapse of the internal cavities and phase transition from iron oxide to metallic iron in hydrogen plasma during the PECVD process. Agglomeration of catalytic NPs is avoided on account of the shrinkage of the NPs and ligand attached to the NPs. Diffusion of NPs into the substrate, which would inactivate the growth of CNTs, is also avoided on account of the ligand. As a result, an ultradense forest of triple-walled CNTs of a uniform internal diameter is successfully synthesized. The area density of the grown CNTs is as high as 0.6 × 10(12) cm(-2). Finally, the activity of the catalytic NPs and the NP/carbon interactions during the growth process of CNTs are investigated and discussed. We believe that the present approach may make a great contribution to the development of an innovative synthetic method for CNTs with selective properties.

Definition of Beam Diameter for Electron Beam Welding

Energy Technology Data Exchange (ETDEWEB)

Burgardt, Paul [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pierce, Stanley W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dvornak, Matthew John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-03-11

It is useful to characterize the dimensions of the electron beam during process development for electron beam welding applications. Analysis of the behavior of electron beam welds is simplest when a single number can be assigned to the beam properties that describes the size of the beam spot; this value we generically call the “beam diameter”. This approach has worked well for most applications and electron beam welding machines with the weld dimensions (width and depth) correlating well with the beam diameter. However, in recent weld development for a refractory alloy, Ta-10W, welded with a low voltage electron beam machine (LVEB), it was found that the weld dimensions (weld penetration and weld width) did not correlate well with the beam diameter and especially with the experimentally determined sharp focus point. These data suggest that the presently used definition of beam diameter may not be optimal for all applications. The possible reasons for this discrepancy and a suggested possible alternative diameter definition is the subject of this paper.

Chronic inhibition of dopamine β-hydroxylase facilitates behavioral responses to cocaine in mice.

Directory of Open Access Journals (Sweden)

Meriem Gaval-Cruz

Full Text Available The anti-alcoholism medication, disulfiram (Antabuse, decreases cocaine use in humans regardless of concurrent alcohol consumption and facilitates cocaine sensitization in rats, but the functional targets are unknown. Disulfiram inhibits dopamine β-hydroxylase (DBH, the enzyme that converts dopamine (DA to norepinephrine (NE in noradrenergic neurons. The goal of this study was to test the effects of chronic genetic or pharmacological DBH inhibition on behavioral responses to cocaine using DBH knockout (Dbh -/- mice, disulfiram, and the selective DBH inhibitor, nepicastat. Locomotor activity was measured in control (Dbh +/- and Dbh -/- mice during a 5 day regimen of saline+saline, disulfiram+saline, nepicastat+saline, saline+cocaine, disulfiram+cocaine, or nepicastat+cocaine. After a 10 day withdrawal period, all groups were administered cocaine, and locomotor activity and stereotypy were measured. Drug-naïve Dbh -/- mice were hypersensitive to cocaine-induced locomotion and resembled cocaine-sensitized Dbh +/- mice. Chronic disulfiram administration facilitated cocaine-induced locomotion in some mice and induced stereotypy in others during the development of sensitization, while cocaine-induced stereotypy was evident in all nepicastat-treated mice. Cocaine-induced stereotypy was profoundly increased in the disulfiram+cocaine, nepicastat+cocaine, and nepicastat+saline groups upon cocaine challenge after withdrawal in Dbh +/- mice. Disulfiram or nepicastat treatment had no effect on behavioral responses to cocaine in Dbh -/- mice. These results demonstrate that chronic DBH inhibition facilitates behavioral responses to cocaine, although different methods of inhibition (genetic vs. non-selective inhibitor vs. selective inhibitor enhance qualitatively different cocaine-induced behaviors.

Chronic Inhibition of Dopamine β-Hydroxylase Facilitates Behavioral Responses to Cocaine in Mice

Science.gov (United States)

Gaval-Cruz, Meriem; Liles, Larry Cameron; Iuvone, Paul Michael; Weinshenker, David

2012-01-01

The anti-alcoholism medication, disulfiram (Antabuse), decreases cocaine use in humans regardless of concurrent alcohol consumption and facilitates cocaine sensitization in rats, but the functional targets are unknown. Disulfiram inhibits dopamine β-hydroxylase (DBH), the enzyme that converts dopamine (DA) to norepinephrine (NE) in noradrenergic neurons. The goal of this study was to test the effects of chronic genetic or pharmacological DBH inhibition on behavioral responses to cocaine using DBH knockout (Dbh −/−) mice, disulfiram, and the selective DBH inhibitor, nepicastat. Locomotor activity was measured in control (Dbh +/−) and Dbh −/− mice during a 5 day regimen of saline+saline, disulfiram+saline, nepicastat+saline, saline+cocaine, disulfiram+cocaine, or nepicastat+cocaine. After a 10 day withdrawal period, all groups were administered cocaine, and locomotor activity and stereotypy were measured. Drug-naïve Dbh −/− mice were hypersensitive to cocaine-induced locomotion and resembled cocaine-sensitized Dbh +/− mice. Chronic disulfiram administration facilitated cocaine-induced locomotion in some mice and induced stereotypy in others during the development of sensitization, while cocaine-induced stereotypy was evident in all nepicastat-treated mice. Cocaine-induced stereotypy was profoundly increased in the disulfiram+cocaine, nepicastat+cocaine, and nepicastat+saline groups upon cocaine challenge after withdrawal in Dbh +/− mice. Disulfiram or nepicastat treatment had no effect on behavioral responses to cocaine in Dbh −/− mice. These results demonstrate that chronic DBH inhibition facilitates behavioral responses to cocaine, although different methods of inhibition (genetic vs. non-selective inhibitor vs. selective inhibitor) enhance qualitatively different cocaine-induced behaviors. PMID:23209785

Choice of Surgical Procedure for Patients With Non-Small-Cell Lung Cancer ≤ 1 cm or > 1 to 2 cm Among Lobectomy, Segmentectomy, and Wedge Resection

DEFF Research Database (Denmark)

Dai, Chenyang; Shen, Jianfei; Ren, Yijiu

2016-01-01

PURPOSE: According to the lung cancer staging project, T1a (≤ 2 cm) non-small-cell lung cancer (NSCLC) should be additionally classified into ≤ 1 cm and > 1 to 2 cm groups. This study aimed to investigate the surgical procedure for NSCLC ≤ 1 cm and > 1 to 2 cm. METHODS: We identified 15...... multiple prognostic factors. RESULTS: OS and LCSS favored lobectomy compared with segmentectomy or wedge resection in patients with NSCLC ≤ 1 cm and > 1 to 2 cm. Multivariable analysis showed that segmentectomy and wedge resection were independently associated with poorer OS and LCSS than lobectomy...... for NSCLC ≤ 1 cm and > 1 to 2 cm. With sublobar resection, lower OS and LCSS emerged for NSCLC > 1 to 2 cm after wedge resection, whereas similar survivals were observed for NSCLC ≤ 1 cm. Multivariable analyses showed that wedge resection is an independent risk factor of survival for NSCLC > 1 to 2 cm...

ROV seafloor surveys combining 5-cm lateral resolution multibeam bathymetry with color stereo photographic imagery

Science.gov (United States)

Caress, D. W.; Hobson, B.; Thomas, H. J.; Henthorn, R.; Martin, E. J.; Bird, L.; Rock, S. M.; Risi, M.; Padial, J. A.

2013-12-01

at three sites in the deep Monterey Canyon axis. The surveys lines were spaced 1.5-m and were flown at speeds of 0.1-0.2-m/s while the sonars pinged at 3 Hz and the cameras operated at 0.5 Hz. All three low-altitude surveys are at ~2850 m depth and lie within the 1-m lateral resolution bathymetry of a 2009, 50-m altitude MBARI Mapping AUV survey. Site 1 has the greatest topography, being centered on a 15 m diameter, 7 m high flat boulder surrounded by an 80 m diameter, 6 m deep scour pit. Site 2 is located within a field of ~3-m high apparent sediment waves with ~80-m wavelengths. Site 0 is flat and includes chemosynthetic clam communities. At a 2 m altitude, the multibeam bathymetry swath is more than 7 m wide and the camera images are 4 m wide. Following navigation adjustment to match features in overlapping bathymetry swaths, we achieve 5-cm lateral resolution topography overlain with ~1-mm scale photographic imagery.

Validating Community-Led Forest Biomass Assessments.

Science.gov (United States)

Venter, Michelle; Venter, Oscar; Edwards, Will; Bird, Michael I

2015-01-01

The lack of capacity to monitor forest carbon stocks in developing countries is undermining global efforts to reduce carbon emissions. Involving local people in monitoring forest carbon stocks could potentially address this capacity gap. This study conducts a complete expert remeasurement of community-led biomass inventories in remote tropical forests of Papua New Guinea. By fully remeasuring and isolating the effects of 4,481 field measurements, we demonstrate that programmes employing local people (non-experts) can produce forest monitoring data as reliable as those produced by scientists (experts). Overall, non-experts reported lower biomass estimates by an average of 9.1%, equivalent to 55.2 fewer tonnes of biomass ha(-1), which could have important financial implications for communities. However, there were no significant differences between forest biomass estimates of expert and non-expert, nor were there significant differences in some of the components used to calculate these estimates, such as tree diameter at breast height (DBH), tree counts and plot surface area, but were significant differences between tree heights. At the landscape level, the greatest biomass discrepancies resulted from height measurements (41%) and, unexpectedly, a few large missing trees contributing to a third of the overall discrepancies. We show that 85% of the biomass discrepancies at the tree level were caused by measurement taken on large trees (DBH ≥50 cm), even though they consisted of only 14% of the stems. We demonstrate that programmes that engage local people can provide high-quality forest carbon data that could help overcome barriers to reducing forest carbon emissions in developing countries. Nonetheless, community-based monitoring programmes should prioritise reducing errors in the field that lead to the most important discrepancies, notably; overcoming challenges to accurately measure large trees.

Encroachment Dynamics of Juniperus virginiana L. and Mesic Hardwood Species into Cross Timbers Forests of North-Central Oklahoma, USA

Directory of Open Access Journals (Sweden)

Daniel L. Hoff

2018-02-01

Full Text Available Cross Timbers forests, typically dominated by Quercus stellata Wangenh. and Q. marilandica Muenchh., are the transition zone between eastern deciduous forest and prairie in the southern Great Plains. Fire exclusion beginning in the mid-1900s has led to increasing stand density and encroachment of fire-intolerant Juniperus virginiana L. and mesic hardwood. We measured current forest structure and tree ages of 25 stands (130 plots in north-central Oklahoma to characterize the extent and dynamics of encroachment. The respective basal area and stand density of the overstory (diameter at breast height; dbh > 10 cm were 19.0 m2 ha−1 and 407 trees ha−1 with Q. stellata comprising 43% of basal area and 42% of stand density. Quercus marilandica represented only 3% of basal area and 4% of overstory density. Juniperus virginiana represented 7% of basal area and 14% of stand density while mesic hardwoods, e.g., Celtis spp., Ulmus spp., Carya spp., 33% of basal area and stand density. The sapling layer was dominated by mesic hardwoods (68% and J. virginiana (25% while the seedling layer was dominated by mesic hardwoods (74%. The majority of Quercus recruited into the overstory between 1910–1970, while recruitment of J. virginiana and mesic hardwoods began more recently (post 1950s. Growth rate, based on the relationship between age and dbh, was faster for mesic hardwoods than for J. virginiana and Q. stellata. These results indicate that removal of recurrent surface fire as a disturbance agent has significantly altered forest composition in the Cross Timbers region by allowing encroachment of J. virginiana and fire-intolerant, mesic hardwoods. This increases wildfire risk because J. virginiana is very flammable and will alter how these forests respond to future drought and other disturbance events.

Biomass Carbon Content in Schima- Castanopsis Forest of Midhills of Nepal: A Case Study from Jaisikuna Community Forest, Kaski

Directory of Open Access Journals (Sweden)

Sushma Tripathi

2018-01-01

Full Text Available Community forests of Nepal’s midhills have high potentiality to sequester carbon. This paper tries to analyze the biomass carbon stock in Schima-Castanopsis forest of Jaisikuna community forests of Kaski district, Nepal. Forest area was divided into two blocks and 18 sample plots (9 in each block which were laid randomly. Diameter at Breast Height (DBH and height of trees (DBH≥5cm were measured using the DBH tape and clinometer. Leaf litter, herbs, grasses and seedlings were collected from 1*1m2 plot and fresh weight was taken. For calculating carbon biomass is multiplied by default value 0.47. The AGTB carbon content of Chilaune, Katus and other species were found 19.56 t/ha, 18.66 t/ha and 3.59 t/ha respectively. The AGTB of Chilaune dominated, Katus dominated and whole forest was found 43.78 t/ha, 39.83 t/ha and 41.81 t/ha respectively. Carbon content at leaf litter, herbs, grasses and seedlings was found 2.73 t/ha. Below ground biomass carbon at whole forest was found 6.27 t/ha. Total biomass and carbon of the forest was found 108.09 t/ha and 50.80 t/ha respectively. Difference in biomass and carbon content at Chilaune dominated block and Katus dominated block was found insignificant. This study record very low biomass carbon content than average of Nepal's forest but this variation in carbon stock is not necessarily due to dominant species present in the forest. Carbon estimation at forest of different elevation, aspect and location are recommended for further research. International Journal of EnvironmentVolume-6, Issue-4, Sep-Nov 2017, page: 72-84

Effects of mountain beaver management and thinning on 15-year-old Douglas fir growth and survival.

Science.gov (United States)

Campbell, Dan L; Engeman, Richard M; Farley, James P

2015-07-01

We examined 4-year growth of 15-year-old damaged and undamaged Douglas fir (Pseudotsuga menzesii) after integrating temporary population reductions of mountain beaver (Aplodontia rufa) with thinning in a pre-commercial hand-planted plantation in western Washington. Five treatment combinations were considered: (1) trapping mountain beavers in an unthinned area, (2) trapping before thinning to 65 trees/ha (160 trees/ac), (3) no trapping and thinning to 65 trees/ha, (4) no trapping and thinning to 146 trees/ha (360 trees/ac), and (5) no trapping and no thinning. Removal of ≥ 90 % of mountain beavers temporarily reduced mountain beaver activity whether the stand was unthinned or thinned. Diameter growth at breast height (dbh) was greater for undamaged trees than for damaged trees in thinned areas. Tree height growth was greatest in trapped areas whether thinned or not. No differences were detected in 4-year survival between trees damaged aboveground and those without aboveground damage, which may be related to undetected root damage to trees without aboveground damage. Basal diameter growth and dbh growth were greatest for areas thinned to 65 trees/ha. Seventy-eight percent of stomachs from mountain beaver trapped in winter contained Douglas fir root or stem materials. Overall, short-term removal of mountain beavers integrated with pre-commercial thinning promoted growth of crop trees.

Diameter Tuning of Single-Walled Carbon Nanotubes by Diffusion Plasma CVD

Directory of Open Access Journals (Sweden)

Toshiaki Kato

2011-01-01

Full Text Available We have realized a diameter tuning of single-walled carbon nanotubes (SWNTs by adjusting process gas pressures with plasma chemical vapor deposition (CVD. Detailed photoluminescence measurements reveal that the diameter distribution of SWNTs clearly shifts to a large-diameter region with an increase in the pressure during plasma CVD, which is also confirmed by Raman scattering spectroscopy. Based on the systematical investigation, it is found that the main diameter of SWNTs is determined by the pressure during the heating in an atmosphere of hydrogen and the diameter distribution is narrowed by adjusting the pressure during the plasma generation. Our results could contribute to an application of SWNTs to high-performance thin-film transistors, which requires the diameter-controlled semiconductor-rich SWNTs.

The trait contribution to wood decomposition rates of 15 Neotropical tree species.

Science.gov (United States)

van Geffen, Koert G; Poorter, Lourens; Sass-Klaassen, Ute; van Logtestijn, Richard S P; Cornelissen, Johannes H C

2010-12-01

The decomposition of dead wood is a critical uncertainty in models of the global carbon cycle. Despite this, relatively few studies have focused on dead wood decomposition, with a strong bias to higher latitudes. Especially the effect of interspecific variation in species traits on differences in wood decomposition rates remains unknown. In order to fill these gaps, we applied a novel method to study long-term wood decomposition of 15 tree species in a Bolivian semi-evergreen tropical moist forest. We hypothesized that interspecific differences in species traits are important drivers of variation in wood decomposition rates. Wood decomposition rates (fractional mass loss) varied between 0.01 and 0.31 yr(-1). We measured 10 different chemical, anatomical, and morphological traits for all species. The species' average traits were useful predictors of wood decomposition rates, particularly the average diameter (dbh) of the tree species (R2 = 0.41). Lignin concentration further increased the proportion of explained inter-specific variation in wood decomposition (both negative relations, cumulative R2 = 0.55), although it did not significantly explain variation in wood decomposition rates if considered alone. When dbh values of the actual dead trees sampled for decomposition rate determination were used as a predictor variable, the final model (including dead tree dbh and lignin concentration) explained even more variation in wood decomposition rates (R2 = 0.71), underlining the importance of dbh in wood decomposition. Other traits, including wood density, wood anatomical traits, macronutrient concentrations, and the amount of phenolic extractives could not significantly explain the variation in wood decomposition rates. The surprising results of this multi-species study, in which for the first time a large set of traits is explicitly linked to wood decomposition rates, merits further testing in other forest ecosystems.

Am/Cm TTR testing - 3/8-inch glass beads evaluation in CIM5

International Nuclear Information System (INIS)

Witt, D. C.

2000-01-01

To facilitate the procurement and handling of the glass former for Am/Cm vitrification in the F-Canyon MPPF, 1/4 inch and 3/8 inch diameter glass beads were purchased from Corning for evaluation in the 5 inch Cylindrical Induction Melter (CIM5). Prior to evaluating the beads in the CIM5, tests were conducted in the Drain Tube Test Stand (DTTS) with 1/4 inch beads, 3/8 inch beads, and a 50/50 mixture to identify any process concerns. Results of the DTTS tests are summarized in Attachment 1. A somewhat larger volume expansion was experienced in all three DTTS runs as compared to a standard run using cullet. Further testing of the use of glass beads in the CIM5 was requested by the Design Authority as Task 1.02 of Technical Task Request 99-MNSS/SE-006. Since the Technical Task Plan was not yet approved, the completion of this task was conducted under an authorization request approved by the SRTC Laboratory Director, S. Wood. This request is included as Attachment 2

Controlled growth of well-aligned carbon nanotubes with large diameters

Science.gov (United States)

Wang, Xianbao; Liu, Yunqi; Zhu, Daoben

2001-06-01

Well-aligned carbon nanotubes (CNTs) with large diameters (25-200 nm) were synthesized by pyrolysis of iron(II) phthalocyanine. The outer diameter up to 218.5 nm and the length of the well-aligned CNTs can be systematically controlled by varying the growth time. A tube-in-tube nano-structure with large and small diameters of 176 and 16.7 nm, respectively, was found. The grain sizes of the iron catalyst play an important role in controlling the CNT diameters. These results are of great importance to design new aligned CNT-based electron field emitters in the potential application of panel displays.

Diameter modulation of vertically aligned single-walled carbon nanotubes.

Science.gov (United States)

Xiang, Rong; Einarsson, Erik; Murakami, Yoichi; Shiomi, Junichiro; Chiashi, Shohei; Tang, Zikang; Maruyama, Shigeo

2012-08-28

We demonstrate wide-range diameter modulation of vertically aligned single-walled carbon nanotubes (SWNTs) using a wet chemistry prepared catalyst. In order to ensure compatibility to electronic applications, the current minimum mean diameter of 2 nm for vertically aligned SWNTs is challenged. The mean diameter is decreased to about 1.4 nm by reducing Co catalyst concentrations to 1/100 or by increasing Mo catalyst concentrations by five times. We also propose a novel spectral analysis method that allows one to distinguish absorbance contributions from the upper, middle, and lower parts of a nanotube array. We use this method to quantitatively characterize the slight diameter change observed along the array height. On the basis of further investigation of the array and catalyst particles, we conclude that catalyst aggregation-rather than Ostwald ripening-dominates the growth of metal particles.

Porosity Assessment for Different Diameters of Coir Lignocellulosic Fibers

Science.gov (United States)

da Luz, Fernanda Santos; Paciornik, Sidnei; Monteiro, Sergio Neves; da Silva, Luiz Carlos; Tommasini, Flávio James; Candido, Verônica Scarpini

2017-10-01

The application of natural lignocellulosic fibers (LCFs) in engineering composites has increased interest in their properties and structural characteristics. In particular, the inherent porosity of an LCF markedly affects its density and the adhesion to polymer matrices. For the first time, both open and closed porosities of a natural LCF, for different diameter ranges, were assessed. Fibers extracted from the mesocarp of the coconut fruit were investigated by nondestructive methods of density measurements and x-ray microtomography (microCT). It was found that, for all diameter ranges, the closed porosity is significantly higher than the open porosity. The total porosity increases with diameter to around 60% for coir fibers with more than 503 μm in diameter. The amount and characteristics of these open and closed porosities were revealed by t test and Weibull statistics as well as by microCT.

Deriving muscle fiber diameter from recorded single fiber potential.

Science.gov (United States)

Zalewska, Ewa

2017-12-01

The aim of the study was to estimate muscle fiber diameters through analysis of single muscle fiber potentials (SFPs) recorded in the frontalis muscle of a healthy subject. Our previously developed analytical and graphic method to derive fiber diameter from the analysis of the negative peak duration and the amplitude of SFP, was applied to a sample of ten SFPs recorded in vivo. Muscle fiber diameters derived from the simulation method for the sample of frontalis muscle SFPs are consistent with anatomical data for this muscle. The results confirm the utility of proposed simulation method. Outlying data could be considered as the result of a contribution of other fibers to the potential recorded using an SFEMG electrode. Our graphic tool provides a rapid estimation of muscle fiber diameter. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Axon diameter mapping in crossing fibers with diffusion MRI

DEFF Research Database (Denmark)

Zhang, Hui; Dyrby, Tim B; Alexander, Daniel C

2011-01-01

This paper proposes a technique for a previously unaddressed problem, namely, mapping axon diameter in crossing fiber regions, using diffusion MRI. Direct measurement of tissue microstructure of this kind using diffusion MRI offers a new class of biomarkers that give more specific information about...... tissue than measures derived from diffusion tensor imaging. Most existing techniques for axon diameter mapping assume a single axon orientation in the tissue model, which limits their application to only the most coherently oriented brain white matter, such as the corpus callosum, where the single...... model to enable axon diameter mapping in voxels with crossing fibers. We show in simulation that the technique can provide robust axon diameter estimates in a two-fiber crossing with the crossing angle as small as 45 degrees. Using ex vivo imaging data, we further demonstrate the feasibility...

5cm aperture dipole studies

International Nuclear Information System (INIS)

McInturff, A.D.; Bossert, R.; Carson, J.; Fisk, H.E.; Hanft, R.; Kuchnir, M.; Lundy, R.; Mantech, P.; Strait, J.

1986-01-01

The results obtained during the evolution of the design, construction, and testing program of the design ''B'' dipole are presented here. Design ''B'' is one of the original three competing designs for the Superconducting Super Collider ''SSC'' arc dipoles. The final design parameters were as follows: air cored (less than a few percent of the magnetic field derived from any iron present), aluminum collared, two layered winding, 5.5T maximum operating field, and a 5 cm cold aperture. There have been fourteen 64 cm long 5 cm aperture model dipoles cold tested (at 4.3K and less) in this program so far. There was a half length full size (6m) mechanical analog (M-10) built and tested to check the cryostat's mechanical design under ramping and quench conditions. Several deviations from the ''Tevatron'' dipole fabrication technique were incorporated, for example the use of aluminum collars instead of stainless steel. The winding technique variations explored were ''dry welding,'' a technique with the cable covered with Kapton insulation only and ''wet winding'' where the Kapton was covered with a light coat of ''B'' stage epoxy. Test data include quench currents, field quality (Fourier multipole co-efficients), coil magnetization, conductor current performance, and coil loading. Quench current, loss per cycle, and harmonics were measured as a function of the magnitude and rate of change of the magnetic field, and helium bath temperature

Demineralized water flow cancelling experiments with ice plug into high diameter horizontal tube (300 nominal diameter)

International Nuclear Information System (INIS)

Gyongyosi, T.; Valeca, S.; Corbescu, B.; Puiu, D.; Panaitescu, V. N.

2015-01-01

The isolation with ice plug of a high diameter horizontal pipeline section is a specific technique for repairs activities/ replacements of components owning to thermo-hydraulic installations working with liquid agents. The application of such technique don.t assumes stopping of the entire system. The ice plugging inside of the pipeline assumes using of a special device and of an own specific technology for application. The paper contains a brief description of the experimental technological facilities used, followed by setting off the main moments in evolution of two experimental tests carried out on the test section with 300 mm nominal diameter for demineralized water and, finally, by a brief results analysis and some conclusions. The paper is dedicated to the specialists working in the research and technological engineering. (authors)

Study of tube diameter effect on the burnout

International Nuclear Information System (INIS)

Levitan, L.L.; Lantsman, F.P.; Dedneva, E.I.

1981-01-01

Effect of a tube diameter d on boundary steam content Xsub(b) is experimentally investigated during unwashed liquid wall film drying in the disperse-ring flow regime. For this purpose systematical experimental investigations of the burnout of the second kind in tubes with diameters of 4, 6 and 12 mm have been carried out as well as the other data relating to burnout in tubes with diameter from 4 to 40 mm are used. The investigations have been carried out at water and steam pressures of 4.9-13.7 MPa and mass velocities from 750 to 5000 kg/m 2 xs. It is elucidated that increase in the tube diameter results in reducing the ranges of pressures and mass velocities at which Xsub(b) is independent of heat flux. Quantity dependence Xsub(b)=f(d) has been obtained as well. The best agreement with data from different experiments is observed when taking into account the effect of d on Xsub(b) by means of the following relation: Xsub(b) is proportional to dsup(-0.25). In this case divergence, as a rule, does not exceed 10% [ru

2-cm versus 4-cm surgical excision margins for primary cutaneous melanoma thicker than 2 mm: a randomised, multicentre trial

DEFF Research Database (Denmark)

Gillgren, Peter; Drzewiecki, Krzysztof T; Niin, Marianne

2011-01-01

Optimum surgical resection margins for patients with clinical stage IIA-C cutaneous melanoma thicker than 2 mm are controversial. The aim of the study was to test whether survival was different for a wide local excision margin of 2 cm compared with a 4-cm excision margin....

Growth responses of trees and understory plants to nitrogen fertilization in a subtropical forest in China

Science.gov (United States)

Tian, Di; Li, Peng; Fang, Wenjing; Xu, Jun; Luo, Yongkai; Yan, Zhengbing; Zhu, Biao; Wang, Jingjing; Xu, Xiaoniu; Fang, Jingyun

2017-07-01

Reactive nitrogen (N) increase in the biosphere has been a noteworthy aspect of global change, producing considerable ecological effects on the functioning and dynamics of the terrestrial ecosystems. A number of observational studies have explored responses of plants to experimentally simulated N enrichment in boreal and temperate forests. Here we investigate how the dominant trees and different understory plants respond to experimental N enrichment in a subtropical forest in China. We conducted a 3.4-year N fertilization experiment in an old-aged subtropical evergreen broad-leaved forest in eastern China with three treatment levels applied to nine 20 m × 20 m plots and replicated in three blocks. We divided the plants into trees, saplings, shrubs (including tree seedlings), and ground-cover plants (ferns) according to the growth forms, and then measured the absolute and relative basal area increments of trees and saplings and the aboveground biomass of understory shrubs and ferns. We further grouped individuals of the dominant tree species, Castanopsis eyrei, into three size classes to investigate their respective growth responses to the N fertilization. Our results showed that the plot-averaged absolute and relative growth rates of basal area and aboveground biomass of trees were not affected by N fertilization. Across the individuals of C. eyrei, the small trees with a DBH (diameter at breast height) of 5-10 cm declined by 66.4 and 59.5 %, respectively, in N50 (50 kg N ha-1 yr-1) and N100 fertilized plots (100 kg N ha-1 yr-1), while the growth of median and large trees with a DBH of > 10 cm did not significantly change with the N fertilization. The growth rate of small trees, saplings, and the aboveground biomass of understory shrubs and ground-cover ferns decreased significantly in the N-fertilized plots. Our findings suggested that N might not be a limiting nutrient in this mature subtropical forest, and that the limitation of other nutrients in the forest

Vegetation and floristics of a lowland tropical rainforest in northeast Australia

Science.gov (United States)

Apgaua, Deborah M. G.; Campbell, Mason J; Cox, Casey J; Crayn, Darren M; Ishida, Françoise Y; Laidlaw, Melinda J; Liddell, Michael J; Seager, Michael; Laurance, Susan G. W.

2016-01-01

Abstract Background Full floristic data, tree demography, and biomass estimates incorporating non-tree lifeforms are seldom collected and reported for forest plots in the tropics. Established research stations serve as important repositories of such biodiversity and ecological data. With a canopy crane setup within a tropical lowland rainforest estate, the 42-ha Daintree Rainforest Observatory (DRO) in Cape Tribulation, northern Australia is a research facility of international significance. We obtained an estimate of the vascular plant species richness for the site, by surveying all vascular plant species from various mature-phase, remnant and open vegetation patches within the site. We also integrate and report the demography and basal areas of trees ≥ 10 cm diameter at breast height (dbh) in a new 1-ha core plot, an extension to the pre-existing forest 1-ha plot under the canopy crane. In addition, we report for the canopy crane plot new demography and basal areas for smaller-size shrubs and treelets subsampled from nine 20 m2 quadrats, and liana basal area and abundance from the whole plot. The DRO site has an estimated total vascular plant species richness of 441 species, of which 172 species (39%) are endemic to Australia, and 4 species are endemics to the Daintree region. The 2 x 1-ha plots contains a total of 262 vascular plant species of which 116 (1531 individuals) are tree species ≥ 10 cm dbh. We estimate a stem basal area of 34.9 m2 ha-1, of which small stems (tree saplings and shrubs rainforests globally, our meta-analysis shows that DRO forests has a comparatively high stem density and moderate species diversity, due to the influence of cyclones. These data will provide an important foundation for ecological and conservation studies in lowland tropical forest. New information We present a floristic checklist, a lifeform breakdown, and demography data from two 1-ha rainforest plots from a lowland tropical rainforest study site. We also present a

Carbon budget of Nyungwe Tropical Montane Rain Forest in Central Africa

Science.gov (United States)

Nyirambangutse, B.; Zibera, E.; Uwizeye, F. K.; Hansson, L.; Nsabimana, D.; Pleijel, H.; Uddling, J.; Wallin, G.

2015-12-01

African tropical rainforests host rich biodiversity and play many roles at different scales such as local, regional and global, in the functioning of the earth system. Despite that the African tropical forests are the world's second largest, it has been neglected in terms of understanding the storage and fluxes of carbon and other nutrients. The question of whether this biome is a net sink or source of atmospheric CO2 is still not answered, and little is known concerning the climate change response. Tropical montane forests are even more poorly sampled compared with their importance. Deeper understanding of these ecosystems is required to provide insights on how they might react under global change. To answer questions related to these issues for African tropical montane forests, 15 permanent 0.5 ha plots were established in 2011 in Nyungwe tropical montane rainforest gazetted as a National Park to protect its extensive floral and faunal diversity. The plots are arranged along an east-westerly transect and includes both primary and secondary forest communities. The study is connected to the global ecosystem monitoring network (GEM, http://gem.tropicalforests.ox.ac.uk/). The aim is to characterize spatial and temporal heterogeneity of carbon and nutrient dynamics processes. The role of microclimate, topography, human disturbances, and plant species to the variability of these pools and processes will be explored. We compare stocks and fluxes of carbon and nutrients of the secondary and primary forest communities. The carbon stock are determined by an inventory of height and diameter at breast height (dbh) of all trees with a dbh above 5 cm, wood density, biomass of understory vegetation, leaf area index, standing and fallen dead wood, fine root biomass and organic content of various soil layers (litter, organic and mineral soil down to 45 cm depth). The carbon fluxes are determined by measurements of photosynthesis and respiration of leaves, above and below ground

Growth responses of trees and understory plants to nitrogen fertilization in a subtropical forest in China

Directory of Open Access Journals (Sweden)

D. Tian

2017-07-01

Full Text Available Reactive nitrogen (N increase in the biosphere has been a noteworthy aspect of global change, producing considerable ecological effects on the functioning and dynamics of the terrestrial ecosystems. A number of observational studies have explored responses of plants to experimentally simulated N enrichment in boreal and temperate forests. Here we investigate how the dominant trees and different understory plants respond to experimental N enrichment in a subtropical forest in China. We conducted a 3.4-year N fertilization experiment in an old-aged subtropical evergreen broad-leaved forest in eastern China with three treatment levels applied to nine 20 m  ×  20 m plots and replicated in three blocks. We divided the plants into trees, saplings, shrubs (including tree seedlings, and ground-cover plants (ferns according to the growth forms, and then measured the absolute and relative basal area increments of trees and saplings and the aboveground biomass of understory shrubs and ferns. We further grouped individuals of the dominant tree species, Castanopsis eyrei, into three size classes to investigate their respective growth responses to the N fertilization. Our results showed that the plot-averaged absolute and relative growth rates of basal area and aboveground biomass of trees were not affected by N fertilization. Across the individuals of C. eyrei, the small trees with a DBH (diameter at breast height of 5–10 cm declined by 66.4 and 59.5 %, respectively, in N50 (50 kg N ha−1 yr−1 and N100 fertilized plots (100 kg N ha−1 yr−1, while the growth of median and large trees with a DBH of  >  10 cm did not significantly change with the N fertilization. The growth rate of small trees, saplings, and the aboveground biomass of understory shrubs and ground-cover ferns decreased significantly in the N-fertilized plots. Our findings suggested that N might not be a limiting nutrient in this mature subtropical

Estructura de una población del árbol Peltogyne purpurea (Cesalpinaceae en un bosque intervenido de la Península de Osa, Costa Rica

Directory of Open Access Journals (Sweden)

Braulio Vílchez

2006-09-01

Full Text Available Se estudió la regeneración de una población del árbol Peltogyne purpurea Pittier después de una corta selectiva de madera en el bosque lluvioso tropical de Mogos, Península de Osa, Costa Rica. La distribución de los árboles adultos de P. purpurea según el diámetro del tallo a la altura del pecho tiene forma de campana. La categoría con la mayor cantidad de individuos correspondió a los árboles con tallos con diámetros entre 70 y 80 cm. No hubo diferencia significativa en el número de brinzales encontrados en los transectos establecidos siguiendo los cuatro puntos cardinales alrededor de los árboles reproductivos (madre. En general, la mayoría de los brinzales se encontraban en los primeros metros alrededor del árbol madre. Se observó otro pico de abundancia de brinzales a la distancia correspondiente con el final de la copa del árbol. La extracción de madera puede tener un efecto negativo en la regeneración de P. purpurea.Population structure of the tree Peltogyne purpurea (Cesalpinaceae in an altered forest at Osa Peninsula, Costa Rica. The regeneration of the rain forest tree Peltogyne purpurea Pittier after selective logging was studied in Mogos, Osa Península, Costa Rica. The distribution of all adult trees of P. purpurea according to diameter at breath height (dbh categories revealed that the distribution of the adult trees followed a bell-shaped curve. The largest number of individuals was found in the 70 to 80 cm dbh category. We did not find any significant differences in the distribution of saplings around seed-producing trees. There were similar numbers of saplings in the four transects established around each reproductive tree following the four cardinal directions. Overall, the majority of the saplings were found in the first meters around each seed-producing tree. There was another peak in the number of saplings at the distance where the crown of the tree ended. Logging can negatively affect the regeneration

Uncertainty Analysis of Consequence Management (CM) Data Products.

Energy Technology Data Exchange (ETDEWEB)

Hunt, Brian D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Eckert-Gallup, Aubrey Celia [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Cochran, Lainy Dromgoole [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kraus, Terrence D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Fournier, Sean Donovan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Allen, Mark B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Schetnan, Richard Reed [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Simpson, Matthew D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Okada, Colin E. [Remote Sensing Lab. (RSL), Nellis AFB, Las Vegas, NV (United States); Bingham, Avery A. [Remote Sensing Lab. (RSL), Nellis AFB, Las Vegas, NV (United States)

2018-01-01

The goal of this project is to develop and execute methods for characterizing uncertainty in data products that are deve loped and distributed by the DOE Consequence Management (CM) Program. A global approach to this problem is necessary because multiple sources of error and uncertainty from across the CM skill sets contribute to the ultimate p roduction of CM data products. This report presents the methods used to develop a probabilistic framework to characterize this uncertainty and provides results for an uncertainty analysis for a study scenario analyzed using this framework.

The BRIDGE HadCM3 family of climate models: HadCM3@Bristol v1.0

Directory of Open Access Journals (Sweden)

P. J. Valdes

2017-10-01

Full Text Available Understanding natural and anthropogenic climate change processes involves using computational models that represent the main components of the Earth system: the atmosphere, ocean, sea ice, and land surface. These models have become increasingly computationally expensive as resolution is increased and more complex process representations are included. However, to gain robust insight into how climate may respond to a given forcing, and to meaningfully quantify the associated uncertainty, it is often required to use either or both ensemble approaches and very long integrations. For this reason, more computationally efficient models can be very valuable tools. Here we provide a comprehensive overview of the suite of climate models based around the HadCM3 coupled general circulation model. This model was developed at the UK Met Office and has been heavily used during the last 15 years for a range of future (and past climate change studies, but has now been largely superseded for many scientific studies by more recently developed models. However, it continues to be extensively used by various institutions, including the BRIDGE (Bristol Research Initiative for the Dynamic Global Environment research group at the University of Bristol, who have made modest adaptations to the base HadCM3 model over time. These adaptations mean that the original documentation is not entirely representative, and several other relatively undocumented configurations are in use. We therefore describe the key features of a number of configurations of the HadCM3 climate model family, which together make up HadCM3@Bristol version 1.0. In order to differentiate variants that have undergone development at BRIDGE, we have introduced the letter B into the model nomenclature. We include descriptions of the atmosphere-only model (HadAM3B, the coupled model with a low-resolution ocean (HadCM3BL, the high-resolution atmosphere-only model (HadAM3BH, and the regional model (HadRM3B

Divergent biparietal diameter growth rates in twin pregnancies.

Science.gov (United States)

Houlton, M C

1977-05-01

Twenty-eight twin pregnancies were monitored by serial ultrasonic cephalometry from 30 or 31 weeks' gestation. The rates of growth of the individual twins as determined by biparietal diameters were similar in 11 cases (39%) and divergent in 17 (61%). When the rates of growth were divergent, the lesser rate was always below the mean for singleton pregnancies, and the incidence of small-for-gestational-age babies was 18 of 34 (53%). It was apparent that the greater the difference in biparietal diameters within the 2 weeks preceding delivery, the higher the risk of a small-for-gestation-age baby being delivered. No comment could be made on the growth rate prior to 28 weeks except that at diagnosis there was little or no difference in biparietal diameters.

Sex Dimorphism of the Heart Diameters and Cardiothoracic Ratios ...

African Journals Online (AJOL)

Objective: To determine gender associated differences in the cardiothoracic ratio (CTR) and heart diameters in a normal Nigerian population. Subject and Method: The normal heart diameters and cardiothoracic ratios were measured from posteroanterior (PA) chest radiographs of healthy 510 male and 508 female ...

Influence of the handrim diameter on heart rate and blood lactate in a world-class wheelchair athlete Influencia del diámetro del aro de propulsión sobre la frecuencia cardiaca y la lactacidemia en un atleta en silla de ruedas de elite mundial

Directory of Open Access Journals (Sweden)

J. Martos

2010-09-01

Full Text Available

The aim of the present study was focused on the determination of the effect of the diameter of the hand-rim of the racing wheelchair on the heart rate and blood lactate produced at the competition speeds.
The study was carried out with a world-class athlete, that made a total of 9 series of 5 minutes, at maintained speed, recovering 10 min between series and testing 3 hand-rim (34, 36 and 38cm of diameter at 3 different speeds (20, 22 and 24 Km/h. Heart rate and blood lactate was measured.
An ANOVA was made and we found statistically significant differences (p <0.0001 on Heart Rate (HR, between the different speeds and between the different diameters of hand-rim. Besides that we also found significant interaction (p <0.0001 among the factors Speed and Diameter of hand-rim.
In general terms it is possible to conclude that at 20 Km/h the most efficient hand-rim (minor HR and blood lactate was the one of 36 cm, whereas the least efficient was the one of 34 cm. Both 22 and 24 Km/h the most efficient hand-rim was that of 34 cm whereas the least efficient was that of 38 cm.
We can conclude that the election of the optimal diameter of hand-rim supposes such improvement in the mechanical efficiency that in case of the studied athlete, his maximum sustainable speed with the hand-rim of 36 cm would be about 23 Km/h whereas with the hand-rim of 34 cm would be 24 Km/h.
KEY WORDS: Wheelchairs. Track and field. Mechanical efficiency.

El objetivo del presente estudio se centró en determinar el efecto del diámetro del aro de propulsión de la silla de ruedas de atletismo sobre la frecuencia cardiaca y la lactacidemia que se produce a velocidades de competición.
El estudio se llevó a cabo con un atleta de elite mundial, quien realizó un total de 9 series de 5 minutos, a velocidad mantenida

Mixed-effects height–diameter models for ten conifers in the inland ...

African Journals Online (AJOL)

To demonstrate the utility of mixed-effects height–diameter models when conducting forest inventories, mixedeffects height–diameter models are presented for several commercially and ecologically important conifers in the inland Northwest of the USA. After obtaining height–diameter measurements from a plot/stand of ...

DETEKSI DIAMETER TUMOR PADA KULIT MENGGUNAKAN SEGMENTASI CITRA BERDASARKAN KARAKTERISTIK ABCDE

Directory of Open Access Journals (Sweden)

Wuwanjie Septian

2016-09-01

ABSTRAK Kanker kulit merupakan pertumbuhan sel kulit abnormal yang tidak dapat dikendalikan dan pada stadium lanjut dapat mengakibatkan kematian. Menemukan penyakit ini sedini mungkin merupakan salah satu cara untuk menghindari kecacatan maupun kemungkinan terburuk. Karena letaknya dipermukaan kulit, akan mudah bagi siapa saja untuk mengenali sendiri kanker kulit. Deteksi dini kanker kulit dalam bidang dermatologi, dapat dideteksi berdasarkan karakteristik Asymmetrical Shape, Border, Color, Diameter, Evolution (ABCDE. Dalam penelitian ini, deteksi dini difokuskan pada identifikasi diameter pada 30 citra nevus. Metode penelitian berupa pengolahan citra nevus dengan melakukan konversi citra menjadi citra HSI lalu diubah menjadi citra biner, selanjutnya dilakukan tahap segmentasi menggunakan filter median, proses rekonstruksi morfologi dan pada tahap akhir dilakukan deteksi tepi dengan menggunakan operator sobel. Proses deteksi tepi akan mempermudah menghitung nilai luas diameter nevus. Hasil penelitian deteksi dini kanker kulit terhadap 30 citra nevus, diperoleh hasil bahwa metode pengolahan citra yang diusulkan dapat mendeteksi diameter nevus dan berhasil mengidentifikasi citra tersebut sebagai 26 citra memiliki luas diameter nevus yang diidentifikasi sebagai tumor jinak dan 4 citra nevus yang memiliki diameter > 6 mm dan dinyatakan sebagai tumor melanoma. Kata Kunci: Nevus, Melanoma, Segmentasi, Deteksi Diameter

Generalized height-diameter models for Populus tremula L. stands

African Journals Online (AJOL)

USER

2010-07-12

Jul 12, 2010 ... and stand density) into the base height-diameter models increased the accuracy of prediction for P. tremula. .... parameter estimates compared with those obtained with ... using coefficient of determination for non-linear regression (. 2. R ), ..... stochastic height-diameter model for maritime pine ecoregions in.

SU-D-19A-05: The Dosimetric Impact of Using Xoft Axxent® Electronic Brachytherapy Source TG-43 Dosimetry Parameters for Treatment with the Xoft 30 Mm Diameter Vaginal Applicator

Energy Technology Data Exchange (ETDEWEB)

Simiele, S; Micka, J; Culberson, W; DeWerd, L [University of WI-Madison/ADCL, Madison, WI (United States)

2014-06-01

Purpose: A full TG-43 dosimetric characterization has not been performed for the Xoft Axxent ® electronic brachytherapy source (Xoft, a subsidiary of iCAD, San Jose, CA) within the Xoft 30 mm diameter vaginal applicator. Currently, dose calculations are performed using the bare-source TG-43 parameters and do not account for the presence of the applicator. This work focuses on determining the difference between the bare-source and sourcein- applicator TG-43 parameters. Both the radial dose function (RDF) and polar anisotropy function (PAF) were computationally determined for the source-in-applicator and bare-source models to determine the impact of using the bare-source dosimetry data. Methods: MCNP5 was used to model the source and the Xoft 30 mm diameter vaginal applicator. All simulations were performed using 0.84p and 0.03e cross section libraries. All models were developed based on specifications provided by Xoft. The applicator is made of a proprietary polymer material and simulations were performed using the most conservative chemical composition. An F6 collision-kerma tally was used to determine the RDF and PAF values in water at various dwell positions. The RDF values were normalized to 2.0 cm from the source to accommodate the applicator radius. Source-in-applicator results were compared with bare-source results from this work as well as published baresource results. Results: For a 0 mm source pullback distance, the updated bare-source model and source-in-applicator RDF values differ by 2% at 3 cm and 4% at 5 cm. The largest PAF disagreements were observed at the distal end of the source and applicator with up to 17% disagreement at 2 cm and 8% at 8 cm. The bare-source model had RDF values within 2.6% of the published TG-43 data and PAF results within 7.2% at 2 cm. Conclusion: Results indicate that notable differences exist between the bare-source and source-in-applicator TG-43 simulated parameters. Xoft Inc. provided partial funding for this work.

Restoration thinning and influence of tree size and leaf area to sapwood area ratio on water relations of Pinus ponderosa.

Science.gov (United States)

Simonin, K; Kolb, T E; Montes-Helu, M; Koch, G W

2006-04-01

Ponderosa pine (Pinus ponderosa Dougl. ex P. Laws) forest stand density has increased significantly over the last century (Covington et al. 1997). To understand the effect of increased intraspecific competition, tree size (height and diameter at breast height (DBH)) and leaf area to sapwood area ratio (A(L):A(S)) on water relations, we compared hydraulic conductance from soil to leaf (kl) and transpiration per unit leaf area (Q(L)) of ponderosa pine trees in an unthinned plot to trees in a thinned plot in the first and second years after thinning in a dense Arizona forest. We calculated kl and Q(L) based on whole- tree sap flux measured with heat dissipation sensors. Thinning increased tree predawn water potential within two weeks of treatment. Effects of thinning on kl and Q(L) depended on DBH, A(L):A(S) and drought severity. During severe drought in the first growing season after thinning, kl and Q(L) of trees with low A(L):A(S) (160-250 mm DBH; 9-11 m height) were lower in the thinned plot than the unthinned plot, suggesting a reduction in stomatal conductance (g(s)) or reduced sapwood specific conductivity (K(S)), or both, in response to thinning. In contrast kl and Q(L) were similar in the thinned plot and unthinned plot for trees with high A(L):A(S) (260-360 mm DBH; 13-16 m height). During non-drought periods, kl and Q(L) were greater in the thinned plot than in the unthinned plot for all but the largest trees. Contrary to previous studies of ponderosa pine, A(L):A(S) was positively correlated with tree height and DBH. Furthermore, kl and Q(L) showed a weak negative correlation with tree height and a strong negative correlation with A(S) and thus A(L):A(S) in both the thinned and unthinned plots, suggesting that trees with high A(L):A(S) had lower g(s). Our results highlight the important influence of stand competitive environment on tree-size-related variation in A(L):A(S) and the roles of A(L):A(S) and drought on whole-tree water relations in response to

Can ratio of the biggest tumor diameter to total tumor diameter be a new parameter in the differential diagnosis of agressive and favorable multifocal papillary thyroid microcarcinoma?

Science.gov (United States)

Tam, Abbas Ali; Özdemir, Didem; Çuhacı, Neslihan; Başer, Hüsniye; Dirikoç, Ahmet; Aydın, Cevdet; Yazgan, Aylin Kılıç; Ersoy, Reyhan; Çakır, Bekir

2017-02-01

In this study, we aimed to evaluate the usefulness of a new parameter -ratio of the biggest tumor diameter to total tumor diameter- for the differentiation of agressive and favorable papillary thyroid microcarcinomas (PTMC). The diameter of the biggest tumor focus was taken as the primary tumor diameter. Total tumor diameter was calculated as the sum of the maximal diameter of each lesion. Ratio of primary tumor diameter to total tumor diameter was defined as tumor diameter ratio (TDR). Positive and negative predictive value, sensitivity and specificity of TDR to predict capsular invasion, extrathyroidal extension (ETE) and lymph node metastasis (LNM) were determined. Mean TDR was significantly lower in multifocal PTMC patients with capsular invasion, ETE, lymphovascular invasion and LNM compared to patients without these features. The sensitivities of TDR for the detection of LNM, ETE and capsular invasion were 100%, 100% and 94.2%, respectively. Specificity of TDR was 86.2% for LNM, 88% for ETE and 94.7% for capsular invasion. Best cut off values of TDR that can predict capsular invasion, ETE and LNM in multifocal PTMC were 0.62, 0.57 and 0.56, respectively. Multifocal papillary thyroid carcinoma patients with capsular invasion, ETE and LNM had significantly lower mean TDR when compared to ones without these features. Decreased TDR was associated with capsular invasion, ETE and LNM in patients with multifocal PTMC and PTC. This new parameter might be particularly helpful for the detection of aggressive behavior in multifocal PTMCs. Copyright © 2016 Elsevier Ltd. All rights reserved.

Radiofrequency Ablation Combined with Renal Arterial Embolization for the Treatment of Unresectable Renal Cell Carcinoma Larger Than 3.5 cm: Initial Experience

International Nuclear Information System (INIS)

Yamakado, Koichiro; Nakatsuka, Atsuhiro; Kobayashi, Shigeki; Akeboshi, Masao; Takaki, Haruyuki; Kariya, Zentaro; Kinbara, Hiroyuki; Arima, Kiminobu; Yanagawa, Makoto; Hori, Yasuhide; Kato, Hiromi; Sugimura, Yoshiki; Takeda, Kan

2006-01-01

The purpose of the study was to evaluate the feasibility, safety, and therapeutic effects of the combination of renal arterial embolization and radiofrequency (RF) ablation to reinforce the anticancer effect on renal cell carcinomas (RCCs) measuring 3.5 cm or larger. This study was undertaken to evaluate this combined therapy on large RCCs-based tumor geometry. Eleven patients with 12 RCCs 3.5 cm or larger in diameter (3.5-9.0 cm) underwent combined therapy. Two were exophytic tumors, and the remaining 10 tumors had components extending into the renal sinus fat. Tumor vessels were selectively embolized in nine patients and the renal artery was completely embolized in two patients with polyvinyl alcohol or ethanol mixed with iodized oil. RF ablation was percutaneously done under the computed tomographic (CT)-fluoroscopic guidance. Response to treatment was evaluated by dynamic contrast-enhanced CT and magnetic resonance (MR) imaging. Tumor enhancement was eliminated after a single RF session in nine tumors (75%), after two sessions in two tumors (17%), and after four sessions in one tumor (8%). Both exophytic tumors (100%) and 7 of 10 tumors having components in the renal sinus fat (70%) were completely ablated with a single RF session. All tumors remained controlled during a mean follow-up period of 13 months and showed significant reduction in tumor sizes (5.2 ± 1.7 cm to 3.6 ± 1.4 cm, p < 0.001). A delayed abscess developed in the ablated lesion in a patient, which was percutaneously drainaged. Combined therapy as described in this report is a feasible, relatively safe, and promising treatment method for large RCCs regardless of tumor geometry

Brain Arterial Diameters as a Risk Factor for Vascular Events

OpenAIRE

Gutierrez, Jose; Cheung, Ken; Bagci, Ahmet; Rundek, Tatjana; Alperin, Noam; Sacco, Ralph L; Wright, Clinton B; Elkind, Mitchell S V

2015-01-01

Background Arterial luminal diameters are routinely used to assess for vascular disease. Although small diameters are typically considered pathological, arterial dilatation has also been associated with disease. We hypothesize that extreme arterial diameters are biomarkers of the risk of vascular events. Methods and Results Participants in the Northern Manhattan Study who had a time-of-flight magnetic resonance angiography were included in this analysis (N=1034). A global arterial Z-score, ca...

Failure Diameter of PBX 9502: Simulations with the SURFplus model

Energy Technology Data Exchange (ETDEWEB)

Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-07-03

SURFplus is a reactive burn model for high explosives aimed at modelling shock initiation and propagation of detonation waves. It utilizes the SURF model for the fast hot-spot reaction plus a slow reaction for the energy released by carbon clustering. A feature of the SURF model is that there is a partially decoupling between burn rate parameters and detonation wave properties. Previously, parameters for PBX 9502 that control shock ini- tiation had been calibrated to Pop plot data (distance-of-run to detonation as a function of shock pressure initiating the detonation). Here burn rate parameters for the high pres- sure regime are adjusted to t the failure diameter and the limiting detonation speed just above the failure diameter. Simulated results are shown for an uncon ned rate stick when the 9502 diameter is slightly above and slightly below the failure diameter. Just above the failure diameter, in the rest frame of the detonation wave, the front is sonic at the PBX/air interface. As a consequence, the lead shock in the neighborhood of the interface is supported by the detonation pressure in the interior of the explosive rather than the reaction immediately behind the front. In the interior, the sonic point occurs near the end of the fast hot-spot reaction. Consequently, the slow carbon clustering reaction can not a ect the failure diameter. Below the failure diameter, the radial extent of the detonation front decreases starting from the PBX/air interface. That is, the failure starts at the PBX boundary and propagates inward to the axis of the rate stick.

Vertebral Artery Diameter and Flow: Nature or Nurture.

Science.gov (United States)

Tarnoki, Adam Domonkos; Fejer, Bence; Tarnoki, David Laszlo; Littvay, Levente; Lucatelli, Pierleone; Cirelli, Carlo; Fanelli, Fabrizio; Sacconi, Beatrice; Fagnani, Corrado; Medda, Emanuela; Farina, Filippo; Meneghetti, Giorgio; Horvath, Tamas; Pucci, Giacomo; Schillaci, Giuseppe; Stazi, Maria Antonietta; Baracchini, Claudio

2017-09-01

In contrast with the carotid arteries, the vertebral arteries (VAs) show considerable variation in length, caliber, and vessel course. This study investigated whether the variation in diameter and flow characteristics of the VAs might be inherited. A total of 172 Italian twins from Padua, Perugia, and Terni (54 monozygotic, 32 dizygotic) recruited from the Italian Twin Registry underwent B-mode and pulsed-wave Doppler ultrasound assessment of their VAs. VA diameters, peak systolic velocity (PSV) and end diastolic velocity (EDV) were assessed at the level of a horizontal V2 segment. Univariate quantitative genetic modeling was performed. Fourteen percent of the sample had VA hypoplasia. Within pair correlation in monozygotic twins was higher than in dizygotics (.552 vs. .229) for VA diameter. Age- and sex-adjusted genetic effect, under the most parsimonious model, accounted for 54.7% (95% CI: 42.2-69.1%) of the variance of VA diameter, and unshared environmental effect for 45.3% (95% CI: 30.9-57.8%). No heritability was found for the PSV of VA, but shared (34.1%; 95% CI: 16.7-53.7%) and unshared (65.9%; 95% CI: 45.9-83.1%) environmental factors determined the variance. EDV of VA is moderately genetically influenced (42.4%; 95% CI: 16.1-64.9%) and also determined by the unshared environment (57.6%; 95% CI: 34.7-83.7%). The diameter of the VAs is moderately genetically determined. Different factors influence the PSV and EDV of VAs, which may highlight the complex hemodynamic background of VA flow and help to understand the vertebral flow anomalies found by ultrasound. Copyright © 2017 by the American Society of Neuroimaging.

Evaluation of flooring produced from small diameters logs of Eucalyptus sp. clones

Directory of Open Access Journals (Sweden)

José Reinaldo Moreira da Silva

2010-12-01

Full Text Available This study evaluated two Eucalyptus clones, MN 249 and MN 89, for the flooring production using small diameters logs. It was considered the wood physical properties - NBR 7190/97 (ABNT, 1997 and simulation of the product in service (ASTM D 2394/83 with two thicknesses, 8 and 14 mm. The basic density of the clone 89 NM was the highest one (0,615 g/cm3. The contractions were more pronounced in clone NM 249, however, the anisotropy coefficient of this clone was small. In the simulation tests, the floor produced by clone MN 249 presented the lowest deformation rate. The floor of 8 mm, in addition to the differences between clones, there was significant interaction between the positions for the indentation test caused by loads applied in small areas. The deformations obtained for the floor with 14 mm thickness, produced with the MN clone 89, were higher than those found in the literature for the indentation load applied on a small area test. The clone MN 249 presented the best results in both thicknesses.

Structure of the epiphyte community in a tropical montane forest in SW China.

Science.gov (United States)

Zhao, Mingxu; Geekiyanage, Nalaka; Xu, Jianchu; Khin, Myo Myo; Nurdiana, Dian Ridwan; Paudel, Ekananda; Harrison, Rhett Daniel

2015-01-01